diff --git a/localization/i18n/Snapmaker_Orca.pot b/localization/i18n/Snapmaker_Orca.pot index ff92b61c7b..29508a882d 100644 --- a/localization/i18n/Snapmaker_Orca.pot +++ b/localization/i18n/Snapmaker_Orca.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-07-30 10:20+0900\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -18,10 +18,116 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." msgstr "" -msgid "Alt + Mouse wheel" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "" + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "" + +msgid "Version:" +msgstr "" + +msgid "Latest version" +msgstr "" + +msgid "Support Painting" +msgstr "" + +msgid "Ctrl+" +msgstr "" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "" + +msgid "Mouse wheel" msgstr "" msgid "Section view" @@ -30,9 +136,6 @@ msgstr "" msgid "Reset direction" msgstr "" -msgid "Ctrl + Mouse wheel" -msgstr "" - msgid "Pen size" msgstr "" @@ -48,9 +151,6 @@ msgstr "" msgid "Block supports" msgstr "" -msgid "Shift + Left mouse button" -msgstr "" - msgid "Erase" msgstr "" @@ -78,6 +178,9 @@ msgstr "" msgid "On overhangs only" msgstr "" +msgid "Auto support threshold angle: " +msgstr "" + msgid "Circle" msgstr "" @@ -97,9 +200,6 @@ msgstr "" msgid "Highlight faces according to overhang angle." msgstr "" -msgid "Auto support threshold angle: " -msgstr "" - msgid "No auto support" msgstr "" @@ -114,7 +214,7 @@ msgstr "" #, possible-boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" @@ -154,12 +254,21 @@ msgstr "" msgid "Height range" msgstr "" -msgid "Alt + Shift + Enter" +msgid "Enter" msgstr "" msgid "Toggle Wireframe" msgstr "" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "" + msgid "Shortcut Key " msgstr "" @@ -182,9 +291,33 @@ msgstr "" msgid "Painted using: Filament %1%" msgstr "" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "" + +msgid "Brush shape" +msgstr "" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "" +msgid "Please select at least one object." +msgstr "" + msgid "Gizmo-Move" msgstr "" @@ -215,13 +348,19 @@ msgstr "" msgid "mm" msgstr "" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" +msgid "Rotate (relative)" msgstr "" msgid "Scale ratios" @@ -239,9 +378,6 @@ msgstr "" msgid "Group Operations" msgstr "" -msgid "Set Position" -msgstr "" - msgid "Set Orientation" msgstr "" @@ -254,22 +390,31 @@ msgstr "" msgid "Reset Rotation" msgstr "" -msgid "World coordinates" -msgstr "" - msgid "Object coordinates" msgstr "" -msgid "°" +msgid "World coordinates" +msgstr "" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "" -msgid "%" -msgstr "" - msgid "uniform scale" msgstr "" @@ -333,6 +478,12 @@ msgstr "" msgid "Depth" msgstr "" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "" + msgid "Groove" msgstr "" @@ -428,9 +579,6 @@ msgstr "" msgid "Confirm connectors" msgstr "" -msgid "Cancel" -msgstr "" - msgid "Build Volume" msgstr "" @@ -583,14 +731,10 @@ msgstr "" msgid "Show wireframe" msgstr "" -#, possible-boost-format -msgid "%1%" +msgid "Can't apply when processing preview." msgstr "" -msgid "Can't apply when process preview." -msgstr "" - -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "" msgid "Face recognition" @@ -599,12 +743,6 @@ msgstr "" msgid "Perform Recognition" msgstr "" -msgid "Brush size" -msgstr "" - -msgid "Brush shape" -msgstr "" - msgid "Enforce seam" msgstr "" @@ -641,7 +779,7 @@ msgid "Angle" msgstr "" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" @@ -654,7 +792,7 @@ msgstr "" msgid "Horizontal text" msgstr "" -msgid "Shift + Mouse move up or down" +msgid "Mouse move up or down" msgstr "" msgid "Rotate text" @@ -778,7 +916,7 @@ msgid "Change Text Type" msgstr "" #, possible-boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "" msgid "Name can't be empty." @@ -967,7 +1105,7 @@ msgstr "" msgid "Undo rotation" msgstr "" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -985,10 +1123,14 @@ msgstr "" msgid "Orient the text towards the camera." msgstr "" +#, possible-boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, possible-boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" msgid "No symbol" @@ -1101,11 +1243,11 @@ msgstr "" msgid "Undefined stroke type" msgstr "" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" @@ -1113,7 +1255,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, possible-boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1143,7 +1285,7 @@ msgstr "" msgid "Change file" msgstr "" -msgid "Change to another .svg file" +msgid "Change to another SVG file." msgstr "" msgid "Forget the file path" @@ -1168,7 +1310,7 @@ msgstr "" msgid "Save SVG file" msgstr "" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "" msgid "Size in emboss direction." @@ -1236,6 +1378,9 @@ msgstr "" msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "" +msgid "No feature" +msgstr "" + msgid "Vertex" msgstr "" @@ -1260,9 +1405,6 @@ msgstr "" msgid "Center of circle" msgstr "" -msgid "ShiftLeft mouse button" -msgstr "" - msgid "Select feature" msgstr "" @@ -1278,17 +1420,21 @@ msgstr "" msgid "Esc" msgstr "" -msgid "Unselect" +msgid "Cancel a feature until exit" msgstr "" msgid "Measure" msgstr "" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" + msgid "Edit to scale" msgstr "" msgctxt "Verb" -msgid "Scale" +msgid "Scale all" msgstr "" msgid "None" @@ -1303,6 +1449,42 @@ msgstr "" msgid "Selection" msgstr "" +msgid " (Moving)" +msgstr "" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" + +msgid "Face" +msgstr "" + +msgid " (Fixed)" +msgstr "" + +msgid "Point" +msgstr "" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" + +msgid "Warning: please select Plane's feature." +msgstr "" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" + +msgid "Warning: please select two different meshes." +msgstr "" + msgid "Copy to clipboard" msgstr "" @@ -1318,7 +1500,25 @@ msgstr "" msgid "Distance XYZ" msgstr "" -msgid "Ctrl+" +msgid "Parallel" +msgstr "" + +msgid "Center coincidence" +msgstr "" + +msgid "Feature 1" +msgstr "" + +msgid "Reverse rotation" +msgstr "" + +msgid "Rotate around center:" +msgstr "" + +msgid "Parallel distance:" +msgstr "" + +msgid "Flip by Face 2" msgstr "" msgid "Notice" @@ -1331,7 +1531,7 @@ msgstr "" msgid "%1% was replaced with %2%" msgstr "" -msgid "The configuration may be generated by a newer version of Snapmaker_Orca." +msgid "The configuration may be generated by a newer version of Snapmaker Orca." msgstr "" msgid "Some values have been replaced. Please check them:" @@ -1354,8 +1554,11 @@ msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker_Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" @@ -1363,7 +1566,7 @@ msgid "Fatal error" msgstr "" msgid "" -"Snapmaker_Orca will terminate because of a localization error. It will be " +"Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" @@ -1371,7 +1574,7 @@ msgid "Critical error" msgstr "" #, possible-boost-format -msgid "Snapmaker_Orca got an unhandled exception: %1%" +msgid "Snapmaker Orca got an unhandled exception: %1%" msgstr "" msgid "Untitled" @@ -1399,6 +1602,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "" +#, possible-c-format, possible-boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, possible-c-format, possible-boost-format msgid "" "%s\n" @@ -1425,8 +1632,8 @@ msgid "Info" msgstr "" msgid "" -"The Snapmaker_Orca configuration file may be corrupted and cannot be parsed.\n" -"Snapmaker_Orca has attempted to recreate the configuration file.\n" +"The Snapmaker Orca configuration file may be corrupted and cannot be parsed.\n" +"Snapmaker Orca has attempted to recreate the configuration file.\n" "Please note, application settings will be lost, but printer profiles will " "not be affected." msgstr "" @@ -1440,26 +1647,26 @@ msgstr "" msgid "Loading a mode view" msgstr "" -msgid "Choose one file (3mf):" +msgid "Choose one file (3MF):" msgstr "" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" msgstr "" msgid "Choose ZIP file" msgstr "" -msgid "Choose one file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" msgstr "" msgid "Some presets are modified." msgstr "" msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" @@ -1474,7 +1681,7 @@ msgstr "" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" msgid "Privacy Policy Update" @@ -1539,7 +1746,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "" #, possible-boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "" msgid "Quality" @@ -1569,12 +1776,18 @@ msgstr "" msgid "Top Minimum Shell Thickness" msgstr "" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "" msgid "Bottom Minimum Shell Thickness" msgstr "" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "" @@ -1641,6 +1854,9 @@ msgstr "" msgid "Delete the selected object" msgstr "" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "" @@ -1662,6 +1878,9 @@ msgstr "" msgid "Orca Cube" msgstr "" +msgid "Orca Tolerance Test" +msgstr "" + msgid "3DBenchy" msgstr "" @@ -1679,7 +1898,7 @@ msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1733,6 +1952,12 @@ msgstr "" msgid "Replace the selected part with new STL" msgstr "" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "" @@ -1770,16 +1995,16 @@ msgstr "" msgid "Edit in Parameter Table" msgstr "" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "" msgid "Assemble" @@ -1866,7 +2091,16 @@ msgstr "" msgid "Auto orientation" msgstr "" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" +msgstr "" + +msgid "Edit" +msgstr "" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" msgstr "" msgid "Select All" @@ -1905,6 +2139,30 @@ msgstr "" msgid "Remove the selected plate" msgstr "" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "" @@ -1914,9 +2172,18 @@ msgstr "" msgid "Center" msgstr "" +msgid "Drop" +msgstr "" + msgid "Edit Process Settings" msgstr "" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "" @@ -1962,7 +2229,7 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "" msgstr[1] "" -msgid "Right click the icon to fix model object" +msgid "Click the icon to repair model object" msgstr "" msgid "Right button click the icon to drop the object settings" @@ -2009,6 +2276,9 @@ msgid "" "objects." msgstr "" +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "" @@ -2025,10 +2295,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" msgid "Delete all connectors" @@ -2037,7 +2307,7 @@ msgstr "" msgid "Deleting the last solid part is not allowed." msgstr "" -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "" msgid "Assembly" @@ -2080,12 +2350,12 @@ msgid "Selection conflicts" msgstr "" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" msgid "The type of the last solid object part is not to be changed." @@ -2146,7 +2416,7 @@ msgstr "" msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "" msgid "Outside" @@ -2167,6 +2437,9 @@ msgstr "" msgid "Mouse ear" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "" @@ -2317,22 +2590,7 @@ msgstr "" msgid "Connecting..." msgstr "" -msgid "?" -msgstr "" - -msgid "/" -msgstr "" - -msgid "Empty" -msgstr "" - -msgid "AMS" -msgstr "" - -msgid "Auto Refill" -msgstr "" - -msgid "AMS not connected" +msgid "Auto-refill" msgstr "" msgid "Load" @@ -2341,28 +2599,121 @@ msgstr "" msgid "Unload" msgstr "" -msgid "Ext Spool" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -msgid "Tips" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." msgstr "" -msgid "Guide" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." msgstr "" -msgid "Retry" +msgid "Change Anyway" msgstr "" -msgid "Calibrating AMS..." +msgid "Off" msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." +msgid "Filter" msgstr "" -msgid "Calibrate again" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." msgstr "" -msgid "Cancel calibration" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" msgstr "" msgid "Idling..." @@ -2380,10 +2731,10 @@ msgstr "" msgid "Push new filament into extruder" msgstr "" -msgid "Purge old filament" +msgid "Grab new filament" msgstr "" -msgid "Feed Filament" +msgid "Purge old filament" msgstr "" msgid "Confirm extruded" @@ -2392,28 +2743,23 @@ msgstr "" msgid "Check filament location" msgstr "" -msgid "Grab new filament" +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " msgstr "" msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" -msgid "Edit" +msgid "No arrangeable objects are selected." msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." -msgstr "" - -msgid "No arrangable objects are selected." -msgstr "" - -msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" msgid "Arranging..." @@ -2444,13 +2790,13 @@ msgid "" msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" msgid "Orienting..." @@ -2501,7 +2847,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "" -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "" msgid "" @@ -2524,7 +2870,7 @@ msgid "" "again." msgstr "" -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" msgid "" @@ -2558,20 +2904,57 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "An SD card needs to be inserted before printing via LAN." +#, possible-c-format, possible-boost-format +msgid "Access code:%s IP address:%s" msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." msgstr "" -msgid "Sending gcode file to sdcard" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "" + +msgid "Sending G-code file to SD card" msgstr "" #, possible-c-format, possible-boost-format msgid "Successfully sent. Close current page in %s s" msgstr "" -msgid "An SD card needs to be inserted before sending to printer." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." msgstr "" msgid "Importing SLA archive" @@ -2608,10 +2991,10 @@ msgstr "" msgid "Download failed" msgstr "" -msgid "Cancelled" +msgid "Canceled" msgstr "" -msgid "Install successfully." +msgid "Installed successfully" msgstr "" msgid "Installing" @@ -2635,7 +3018,7 @@ msgstr "" msgid "GNU Affero General Public License, version 3" msgstr "" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2650,10 +3033,7 @@ msgstr "" msgid "About %s" msgstr "" -msgid "Snapmaker Orca " -msgstr "" - -msgid "Snapmaker_Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." +msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." @@ -2679,9 +3059,6 @@ msgstr "" msgid "Close" msgstr "" -msgid "Colour" -msgstr "" - msgid "" "Nozzle\n" "Temperature" @@ -2700,9 +3077,6 @@ msgstr "" msgid "SN" msgstr "" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" - msgid "Factors of Flow Dynamics Calibration" msgstr "" @@ -2715,6 +3089,9 @@ msgstr "" msgid "Factor N" msgstr "" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" @@ -2732,6 +3109,15 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "" + msgid "Other Color" msgstr "" @@ -2762,15 +3148,9 @@ msgstr "" msgid "Max volumetric speed" msgstr "" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "" -msgid "mm³" -msgstr "" - msgid "Start calibration" msgstr "" @@ -2809,11 +3189,78 @@ msgstr "" msgid "Step" msgstr "" -msgid "AMS Slots" +msgid "Unmapped" msgstr "" msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + +msgid "AMS Slots" +msgstr "" + +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "" + +msgid "Ext" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" msgid "Enable AMS" @@ -2828,18 +3275,15 @@ msgstr "" msgid "Print with the filament mounted on the back of chassis" msgstr "" -msgid "Current Cabin humidity" -msgstr "" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" msgid "Filament used in this print job" @@ -2857,20 +3301,37 @@ msgstr "" msgid "Print using materials mounted on the back of the case" msgstr "" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "" msgid "Print with filaments mounted on the back of the chassis" msgstr "" +msgid "Auto Refill" +msgstr "" + +msgid "Left" +msgstr "" + +msgid "Right" +msgstr "" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "" +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "" @@ -2879,10 +3340,9 @@ msgid "" msgstr "" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" msgid "DRY" @@ -2903,7 +3363,7 @@ msgid "" msgstr "" msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" @@ -2917,8 +3377,8 @@ msgstr "" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" msgid "" @@ -2931,17 +3391,16 @@ msgid "Update remaining capacity" msgstr "" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" msgid "AMS filament backup" msgstr "" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" msgid "Air Printing Detection" @@ -2987,10 +3446,14 @@ msgid "" "program" msgstr "" -msgid "Please save project and restart the program. " +#, possible-boost-format +msgid "A fatal error occurred: \"%1%\"" msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "" + +msgid "Processing G-code from Previous file..." msgstr "" msgid "Slicing complete" @@ -3023,7 +3486,7 @@ msgstr "" msgid "Successfully executed post-processing script" msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "" #, possible-boost-format @@ -3062,12 +3525,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "" #, possible-boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3079,222 +3542,6 @@ msgstr "" msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" -msgid "Device" -msgstr "" - -msgid "Task Sending" -msgstr "" - -msgid "Task Sent" -msgstr "" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "" - -msgid "No task" -msgstr "" - -msgid "View" -msgstr "" - -msgid "N/A" -msgstr "" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "" - -msgid "Task Name" -msgstr "" - -msgid "Device Status" -msgstr "" - -msgid "Actions" -msgstr "" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "" - -msgid "Idle" -msgstr "" - -msgid "Printing" -msgstr "" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "" - -msgid "Slicing" -msgstr "" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "" - -msgid "Stop" -msgstr "" - -msgid "Task Status" -msgstr "" - -msgid "Sent Time" -msgstr "" - -msgid "There are no tasks to be sent!" -msgstr "" - -msgid "No historical tasks!" -msgstr "" - -msgid "Loading..." -msgstr "" - -msgid "No AMS" -msgstr "" - -msgid "Send to Multi-device" -msgstr "" - -msgid "Preparing print job" -msgstr "" - -msgid "Abnormal print file data. Please slice again" -msgstr "" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "" - -msgid "Use AMS" -msgstr "" - -msgid "Select Printers" -msgstr "" - -msgid "Ams Status" -msgstr "" - -msgid "Printing Options" -msgstr "" - -msgid "Bed Leveling" -msgstr "" - -msgid "Timelapse" -msgstr "" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" - -msgid "Wait" -msgstr "" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" - -msgid "Send" -msgstr "" - -msgid "Name is invalid;" -msgstr "" - -msgid "illegal characters:" -msgstr "" - -msgid "illegal suffix:" -msgstr "" - -msgid "The name is not allowed to be empty." -msgstr "" - -msgid "The name is not allowed to start with space character." -msgstr "" - -msgid "The name is not allowed to end with space character." -msgstr "" - -msgid "The name length exceeds the limit." -msgstr "" - msgid "Origin" msgstr "" @@ -3360,9 +3607,12 @@ msgstr "" msgid "Bed Shape" msgstr "" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, possible-c-format, possible-boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" msgid "" @@ -3381,30 +3631,30 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" msgid "" @@ -3432,14 +3682,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3464,37 +3714,54 @@ msgid "" "NO - Keep Independent Support Layer Height" msgstr "" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, possible-c-format, possible-boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" msgid " But machines with I3 structure will not generate timelapse videos." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" +msgid "Printing" +msgstr "" + msgid "Auto bed leveling" msgstr "" msgid "Heatbed preheating" msgstr "" -msgid "Sweeping XY mech mode" +msgid "Vibration compensation" msgstr "" msgid "Changing filament" @@ -3503,13 +3770,13 @@ msgstr "" msgid "M400 pause" msgstr "" -msgid "Paused due to filament runout" +msgid "Paused (filament ran out)" msgstr "" -msgid "Heating hotend" +msgid "Heating nozzle" msgstr "" -msgid "Calibrating extrusion" +msgid "Calibrating dynamic flow" msgstr "" msgid "Scanning bed surface" @@ -3533,78 +3800,138 @@ msgstr "" msgid "Checking extruder temperature" msgstr "" -msgid "Printing was paused by the user" +msgid "Paused by the user" msgstr "" -msgid "Pause of front cover falling" +msgid "Pause (front cover fall off)" msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "" -msgid "Calibrating extrusion flow" +msgid "Calibrating flow ratio" msgstr "" -msgid "Paused due to nozzle temperature malfunction" +msgid "Pause (nozzle temperature malfunction)" msgstr "" -msgid "Paused due to heat bed temperature malfunction" +msgid "Pause (heatbed temperature malfunction)" msgstr "" msgid "Filament unloading" msgstr "" -msgid "Skip step pause" +msgid "Pause (step loss)" msgstr "" msgid "Filament loading" msgstr "" -msgid "Motor noise calibration" +msgid "Motor noise cancellation" msgstr "" -msgid "Paused due to AMS lost" +msgid "Pause (AMS offline)" msgstr "" -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (low speed of the heatbreak fan)" msgstr "" -msgid "Paused due to chamber temperature control error" +msgid "Pause (chamber temperature control problem)" msgstr "" msgid "Cooling chamber" msgstr "" -msgid "Paused by the Gcode inserted by user" +msgid "Pause (G-code inserted by user)" msgstr "" msgid "Motor noise showoff" msgstr "" -msgid "Nozzle filament covered detected pause" +msgid "Pause (nozzle clumping)" msgstr "" -msgid "Cutter error pause" +msgid "Pause (cutter error)" msgstr "" -msgid "First layer error pause" +msgid "Pause (first layer error)" msgstr "" -msgid "Nozzle clog pause" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" msgstr "" msgid "Unknown" msgstr "" -msgid "Fatal" -msgstr "" - -msgid "Serious" -msgstr "" - -msgid "Common" -msgstr "" - msgid "Update successful." msgstr "" @@ -3617,25 +3944,54 @@ msgstr "" msgid "Update failed." msgstr "" +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + msgid "" "The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" "TPU) is not allowed to be loaded." msgstr "" msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "" msgid "" @@ -3648,26 +4004,76 @@ msgstr "" msgid "Selected diameter and machine diameter do not match" msgstr "" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "" msgid "Calibration error" msgstr "" -msgid "TPU is not supported by AMS." +msgid "Resume Printing" msgstr "" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +msgid "Resume (defects acceptable)" msgstr "" -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (problem solved)" msgstr "" -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "" + +msgid "Retry" +msgstr "" + +msgid "Resume" +msgstr "" + +msgid "Unknown error." msgstr "" msgid "default" @@ -3680,7 +4086,7 @@ msgstr "" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3739,7 +4145,7 @@ msgid "parameter name" msgstr "" #, possible-c-format, possible-boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "" #, possible-c-format, possible-boost-format @@ -3775,10 +4181,27 @@ msgstr "" msgid "Some extension in the input is invalid" msgstr "" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, possible-boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "" +msgid "N/A" +msgstr "" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "" @@ -3788,9 +4211,6 @@ msgstr "" msgid "Fan Speed" msgstr "" -msgid "Temperature" -msgstr "" - msgid "Flow" msgstr "" @@ -3824,7 +4244,7 @@ msgstr "" msgid "Temperature: " msgstr "" -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "" msgid "Generating geometry vertex data" @@ -3857,16 +4277,85 @@ msgstr "" msgid "Total cost" msgstr "" -msgid "Color Scheme" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, possible-boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, possible-boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, possible-boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, possible-boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, possible-boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, possible-boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "" + +msgid "up to" +msgstr "" + +msgid "above" +msgstr "" + +msgid "from" msgstr "" msgid "Time" msgstr "" -msgid "Percent" -msgstr "" - -msgid "Used filament" +msgid "Usage" msgstr "" msgid "Layer Height (mm)" @@ -3914,25 +4403,22 @@ msgstr "" msgid "Extruder" msgstr "" -msgid "Filament change times" -msgstr "" - msgid "Cost" msgstr "" -msgid "Print" +msgid "Filament change times" msgstr "" msgid "Color change" msgstr "" +msgid "Print" +msgstr "" + msgid "Printer" msgstr "" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -3959,6 +4445,19 @@ msgstr "" msgid "Switch to normal mode" msgstr "" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "" @@ -3977,27 +4476,15 @@ msgstr "" msgid "Keep min" msgstr "" -msgid "Left mouse button:" -msgstr "" - msgid "Add detail" msgstr "" -msgid "Right mouse button:" -msgstr "" - msgid "Remove detail" msgstr "" -msgid "Shift + Left mouse button:" -msgstr "" - msgid "Reset to base" msgstr "" -msgid "Shift + Right mouse button:" -msgstr "" - msgid "Smoothing" msgstr "" @@ -4010,6 +4497,55 @@ msgstr "" msgid "Sequence" msgstr "" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, possible-boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, possible-boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "" @@ -4055,10 +4591,24 @@ msgstr "" msgid "Align to Y axis" msgstr "" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "" + msgid "Add plate" msgstr "" -msgid "Auto orient" +msgid "Auto orient all/selected objects" +msgstr "" + +msgid "Auto orient all objects on current plate" msgstr "" msgid "Arrange all objects" @@ -4079,10 +4629,28 @@ msgstr "" msgid "Select Plate" msgstr "" +msgid "Slicing" +msgstr "" + +msgid "Slice all" +msgstr "" + +msgid "Failed" +msgstr "" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "" -msgid "return" +msgid "Return" +msgstr "" + +msgid "Toggle Axis" msgstr "" msgid "Paint Toolbar" @@ -4097,6 +4665,9 @@ msgstr "" msgid "Assemble Control" msgstr "" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "" @@ -4111,26 +4682,68 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "" msgid "A G-code path goes beyond the max print height." msgstr "" -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "" -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" msgid "Calibration step selection" @@ -4142,10 +4755,7 @@ msgstr "" msgid "Bed leveling" msgstr "" -msgid "Vibration compensation" -msgstr "" - -msgid "Motor noise cancellation" +msgid "High-temperature Heatbed Calibration" msgstr "" msgid "Calibration program" @@ -4196,20 +4806,19 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "" -msgid "720p" -msgstr "" - -msgid "1080p" -msgstr "" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "" msgid "Please input the printer access code:" msgstr "" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" @@ -4231,9 +4840,15 @@ msgstr "" msgid "Logging" msgstr "" +msgid "Prepare" +msgstr "" + msgid "Preview" msgstr "" +msgid "Device" +msgstr "" + msgid "Multi-device" msgstr "" @@ -4255,10 +4870,10 @@ msgstr "" msgid "Print plate" msgstr "" -msgid "Slice all" +msgid "Export G-code file" msgstr "" -msgid "Export G-code file" +msgid "Send" msgstr "" msgid "Export plate sliced file" @@ -4273,6 +4888,9 @@ msgstr "" msgid "Send all" msgstr "" +msgid "Send to Multi-device" +msgstr "" + msgid "Keyboard Shortcuts" msgstr "" @@ -4307,10 +4925,6 @@ msgstr "" msgid "Default View" msgstr "" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "" - msgid "Top View" msgstr "" @@ -4333,15 +4947,9 @@ msgstr "" msgid "Rear View" msgstr "" -msgid "Left" -msgstr "" - msgid "Left View" msgstr "" -msgid "Right" -msgstr "" - msgid "Right View" msgstr "" @@ -4357,7 +4965,7 @@ msgstr "" msgid "Open a project file" msgstr "" -msgid "Recent projects" +msgid "Recent files" msgstr "" msgid "Save Project" @@ -4369,9 +4977,6 @@ msgstr "" msgid "Save Project as" msgstr "" -msgid "Shift+" -msgstr "" - msgid "Save current project as" msgstr "" @@ -4405,7 +5010,7 @@ msgstr "" msgid "Export Generic 3MF" msgstr "" -msgid "Export 3mf file without using some 3mf-extensions" +msgid "Export 3MF file without using some 3mf-extensions" msgstr "" msgid "Export current sliced file" @@ -4420,6 +5025,9 @@ msgstr "" msgid "Export current plate as G-code" msgstr "" +msgid "Export toolpaths as OBJ" +msgstr "" + msgid "Export Preset Bundle" msgstr "" @@ -4471,6 +5079,12 @@ msgstr "" msgid "Clone copies of selections" msgstr "" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "" @@ -4489,16 +5103,24 @@ msgstr "" msgid "Use Orthogonal View" msgstr "" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4510,18 +5132,27 @@ msgstr "" msgid "Show &Labels" msgstr "" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "" msgid "Show &Overhang" msgstr "" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." +msgstr "" + +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." msgstr "" msgid "Preferences" msgstr "" +msgid "View" +msgstr "" + msgid "Help" msgstr "" @@ -4540,6 +5171,18 @@ msgstr "" msgid "Flow rate test - Pass 2" msgstr "" +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" + msgid "Flow rate" msgstr "" @@ -4549,16 +5192,25 @@ msgstr "" msgid "Retraction test" msgstr "" -msgid "Orca Tolerance Test" -msgstr "" - msgid "Max flowrate" msgstr "" -msgid "VFA" +msgid "Cornering" msgstr "" -msgid "More..." +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + +msgid "VFA" msgstr "" msgid "Tutorial" @@ -4567,9 +5219,6 @@ msgstr "" msgid "Calibration help" msgstr "" -msgid "More calibrations" -msgstr "" - msgid "&Open G-code" msgstr "" @@ -4585,9 +5234,6 @@ msgstr "" msgid "Export &Toolpaths as OBJ" msgstr "" -msgid "Export toolpaths as OBJ" -msgstr "" - msgid "Open &Slicer" msgstr "" @@ -4611,16 +5257,19 @@ msgid "&Help" msgstr "" #, possible-c-format, possible-boost-format -msgid "A file exists with the same name: %s, do you want to override it." +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "" #, possible-c-format, possible-boost-format -msgid "A config exists with the same name: %s, do you want to override it." +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "" msgid "Overwrite file" msgstr "" +msgid "Overwrite config" +msgstr "" + msgid "Yes to All" msgstr "" @@ -4668,7 +5317,7 @@ msgid "Filament Settings" msgstr "" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4698,7 +5347,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "" -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" msgid "" @@ -4715,14 +5364,14 @@ msgid "Connection Failed. Please check the network and try again" msgstr "" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "" -msgid "Stopped." +msgid "Video Stopped." msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" @@ -4755,6 +5404,9 @@ msgstr "" msgid "Playing..." msgstr "" +msgid "Loading..." +msgstr "" + msgid "Year" msgstr "" @@ -4773,6 +5425,9 @@ msgstr "" msgid "Show all files, recent first." msgstr "" +msgid "Timelapse" +msgstr "" + msgid "Switch to timelapse files." msgstr "" @@ -4782,7 +5437,7 @@ msgstr "" msgid "Switch to video files." msgstr "" -msgid "Switch to 3mf model files." +msgid "Switch to 3MF model files." msgstr "" msgid "Delete selected files from printer." @@ -4809,10 +5464,6 @@ msgstr "" msgid "No printers." msgstr "" -#, possible-c-format, possible-boost-format -msgid "Connect failed [%d]!" -msgstr "" - msgid "Loading file list..." msgstr "" @@ -4822,25 +5473,15 @@ msgstr "" msgid "Load failed" msgstr "" -msgid "Initialize failed (Device connection not ready)!" -msgstr "" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" - msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Initialize failed (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" #, possible-c-format, possible-boost-format @@ -4860,7 +5501,7 @@ msgstr "" msgid "Delete file" msgstr "" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "" msgid "Failed to fetch model information from printer." @@ -4870,8 +5511,8 @@ msgid "Failed to parse model information." msgstr "" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" #, possible-c-format, possible-boost-format @@ -4900,11 +5541,17 @@ msgstr "" msgid "Downloading %d%%..." msgstr "" +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "" @@ -4914,13 +5561,47 @@ msgstr "" msgid "Not supported on the current printer version." msgstr "" -msgid "Storage unavailable, insert SD card." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." msgstr "" #, possible-c-format, possible-boost-format msgid "Error code: %d" msgstr "" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "" @@ -4960,10 +5641,83 @@ msgstr "" msgid "Invert Roll axis" msgstr "" +msgid "(LAN)" +msgstr "" + +msgid "Search" +msgstr "" + +msgid "My Device" +msgstr "" + +msgid "Other Device" +msgstr "" + +msgid "Online" +msgstr "" + +msgid "Input access code" +msgstr "" + +msgid "Can't find my devices?" +msgstr "" + +msgid "Log out successful." +msgstr "" + +msgid "Offline" +msgstr "" + +msgid "Busy" +msgstr "" + +msgid "Modifying the device name" +msgstr "" + +msgid "Name is invalid;" +msgstr "" + +msgid "illegal characters:" +msgstr "" + +msgid "illegal suffix:" +msgstr "" + +msgid "The name is not allowed to be empty." +msgstr "" + +msgid "The name is not allowed to start with space character." +msgstr "" + +msgid "The name is not allowed to end with space character." +msgstr "" + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "" -msgid "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" msgstr "" msgid "Layer: N/A" @@ -4991,7 +5745,7 @@ msgstr "" msgid "Camera" msgstr "" -msgid "SD Card" +msgid "Storage" msgstr "" msgid "Camera Setting" @@ -5009,34 +5763,40 @@ msgstr "" msgid "Print Options" msgstr "" -msgid "100%" -msgstr "" - msgid "Lamp" msgstr "" -msgid "Aux" -msgstr "" - -msgid "Cham" -msgstr "" - msgid "Bed" msgstr "" msgid "Debug Info" msgstr "" -msgid "No SD Card" +msgid "Filament loading..." msgstr "" -msgid "SD Card Abnormal" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" msgstr "" msgid "Cancel print" msgstr "" -msgid "Are you sure you want to cancel this print?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "" + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." msgstr "" msgid "Downloading..." @@ -5058,14 +5818,12 @@ msgid "Layer: %d/%d" msgstr "" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -msgid "Still unload" -msgstr "" - -msgid "Still load" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." msgstr "" msgid "Please select an AMS slot before calibration" @@ -5091,7 +5849,18 @@ msgstr "" msgid "Ludicrous" msgstr "" -msgid "Can't start this without SD card." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." msgstr "" msgid "Rate the Print Profile" @@ -5115,13 +5884,10 @@ msgstr "" msgid "Please click on the star first." msgstr "" -msgid "InFo" -msgstr "" - msgid "Get oss config failed." msgstr "" -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "" msgid "Number of images successfully uploaded" @@ -5136,7 +5902,7 @@ msgstr "" msgid " No corresponding storage bucket\n" msgstr "" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr "" msgid "" @@ -5158,7 +5924,7 @@ msgid "obtaining instance_id failed\n" msgstr "" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5169,12 +5935,12 @@ msgstr "" msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" msgid "You can select up to 16 images." @@ -5182,18 +5948,28 @@ msgstr "" msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" msgid "Status" msgstr "" +msgctxt "Firmware" msgid "Update" msgstr "" +msgid "Assistant(HMS)" +msgstr "" + msgid "Don't show again" msgstr "" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, possible-c-format, possible-boost-format msgid "%s error" msgstr "" @@ -5221,11 +5997,11 @@ msgstr "" msgid "Skip" msgstr "" -msgid "Newer 3mf version" +msgid "Newer 3MF version" msgstr "" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker_Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5235,10 +6011,10 @@ msgstr "" msgid "Download Beta Version" msgstr "" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " @@ -5247,9 +6023,32 @@ msgstr "" msgid "Latest Version: " msgstr "" +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "" +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" + msgid "3D Mouse disconnected." msgstr "" @@ -5312,7 +6111,13 @@ msgstr[1] "" #, possible-c-format, possible-boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "" +msgstr[1] "" + +#, possible-c-format, possible-boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgstr[1] "" @@ -5337,7 +6142,7 @@ msgstr "" msgid "Warning:" msgstr "" -msgid "Export successfully." +msgid "Exported successfully" msgstr "" msgid "Model file downloaded." @@ -5355,10 +6160,10 @@ msgstr "" msgid "WARNING:" msgstr "" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "" msgid "Support painting" @@ -5404,12 +6209,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "" -msgid "Enable AI monitoring of printing" -msgstr "" - -msgid "Sensitivity of pausing is" -msgstr "" - msgid "Enable detection of build plate position" msgstr "" @@ -5418,35 +6217,106 @@ msgid "" "the tag is not in predefined range." msgstr "" +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "" msgid "Auto-recovery from step loss" msgstr "" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "" msgid "Filament Tangle Detect" msgstr "" -msgid "Nozzle Clumping Detection" -msgstr "" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" msgid "Nozzle Type" msgstr "" -msgid "Stainless Steel" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" msgstr "" msgid "Hardened Steel" msgstr "" -#, possible-c-format, possible-boost-format -msgid "%.1f" +msgid "Stainless Steel" +msgstr "" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." msgstr "" msgid "Global" @@ -5482,6 +6352,9 @@ msgstr "" msgid "Lock current plate" msgstr "" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5491,6 +6364,31 @@ msgstr "" msgid "Customize current plate" msgstr "" +#, possible-c-format, possible-boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, possible-boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, possible-boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, possible-boost-format +msgid "%1% with %2%\n" +msgstr "" + #, possible-boost-format msgid " plate %1%:" msgstr "" @@ -5519,13 +6417,66 @@ msgstr "" msgid "Filament changes" msgstr "" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "" msgid "Connection" msgstr "" -msgid "Bed type" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" msgstr "" msgid "Flushing volumes" @@ -5549,36 +6500,27 @@ msgstr "" msgid "Pellets" msgstr "" +#, possible-c-format, possible-boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." +msgstr "" + +msgid "There are no compatible filaments, and sync is not performed." msgstr "" msgid "Sync filaments with AMS" msgstr "" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" - -msgid "Sync" -msgstr "" - -msgid "Resync" -msgstr "" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "" - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, possible-boost-format @@ -5587,12 +6529,12 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" #, possible-c-format, possible-boost-format -msgid "Ejecting of device %s(%s) has failed." +msgid "Ejecting of device %s (%s) has failed." msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" @@ -5618,26 +6560,45 @@ msgid "" "It is recommended to change to smooth mode." msgstr "" +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "" msgid "Collapse sidebar" msgstr "" +msgid "Tab" +msgstr "" + #, possible-c-format, possible-boost-format msgid "Loading file: %s" msgstr "" -msgid "The 3mf is not supported by Snapmaker_Orca, load geometry data only." +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -msgid "Load 3mf" +msgid "Load 3MF" +msgstr "" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" msgid "You'd better upgrade your software.\n" @@ -5645,39 +6606,45 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -msgid "Invalid values found in the 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" msgstr "" msgid "Please correct them in the param tabs" msgstr "" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" msgid "Customized Preset" msgstr "" -msgid "Name of components inside step file is not UTF8 format!" +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "" msgid "The name may show garbage characters!" @@ -5720,22 +6687,27 @@ msgstr "" msgid "Object with multiple parts was detected" msgstr "" +#, possible-c-format, possible-boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "" msgid "" -"Your object appears to be too large. It will be scaled down to fit the heat " -"bed automatically." +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" msgid "Object too large" msgstr "" -msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" -msgstr "" - msgid "Export STL file:" msgstr "" @@ -5787,6 +6759,34 @@ msgstr "" msgid "File for the replace wasn't selected" msgstr "" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, possible-boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, possible-boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, possible-boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, possible-boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "" @@ -5830,7 +6830,18 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." +msgstr "" + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" msgstr "" msgid "You can keep the modified presets to the new project or discard them" @@ -5854,13 +6865,13 @@ msgstr "" msgid "Importing Model" msgstr "" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "" msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "" msgid "Download failed, File size exception." @@ -5875,13 +6886,23 @@ msgid "" "import it." msgstr "" +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "" msgid "The selected file" msgstr "" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "" msgid "Error occurs while loading G-code file" @@ -5919,10 +6940,10 @@ msgstr "" msgid "G-code loading" msgstr "" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "" msgid "All objects will be removed, continue?" @@ -5958,6 +6979,12 @@ msgid "" "on the printer." msgstr "" +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -5984,21 +7011,15 @@ msgid "" "will be exported." msgstr "" -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" msgid "Upload and Print" msgstr "" +msgid "Abnormal print file data. Please slice again" +msgstr "" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6016,7 +7037,32 @@ msgstr "" msgid "Optimize Rotation" msgstr "" -msgid "Invalid number" +#, possible-c-format, possible-boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" msgstr "" msgid "Plate Settings" @@ -6058,9 +7104,6 @@ msgstr "" msgid "Triangles: %1%\n" msgstr "" -msgid "Tips:" -msgstr "" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6068,9 +7111,35 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" msgid "Switching the language requires application restart.\n" @@ -6082,42 +7151,12 @@ msgstr "" msgid "Language selection" msgstr "" +msgid "Switching application language while some presets are modified." +msgstr "" + msgid "Changing application language" msgstr "" -msgid "Changing the region will log out your account.\n" -msgstr "" - -msgid "Region selection" -msgstr "" - -msgid "Second" -msgstr "" - -msgid "Browse" -msgstr "" - -msgid "Choose Download Directory" -msgstr "" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker_Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "" - msgid "Asia-Pacific" msgstr "" @@ -6133,21 +7172,55 @@ msgstr "" msgid "Others" msgstr "" -msgid "Login Region" +msgid "Changing the region will log out your account.\n" msgstr "" -msgid "Stealth Mode" +msgid "Region selection" +msgstr "" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "" + +msgid "Bed Temperature Difference Warning" msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -msgid "Enable network plugin" +msgid "Browse" msgstr "" -msgid "Check for stable updates only" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "" + +msgid "Associate" +msgstr "" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "" + +msgid "Current Association: " +msgstr "" + +msgid "Current Instance" +msgstr "" + +msgid "Current Instance Path: " +msgstr "" + +msgid "General" msgstr "" msgid "Metric" @@ -6159,7 +7232,19 @@ msgstr "" msgid "Units" msgstr "" -msgid "Allow only one Snapmaker_Orca instance" +msgid "Home" +msgstr "" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Enable dark mode" +msgstr "" + +msgid "Allow only one Snapmaker Orca instance" msgstr "" msgid "" @@ -6169,18 +7254,108 @@ msgid "" msgstr "" msgid "" -"If this is enabled, when starting Snapmaker_Orca and another instance of the " -"same Snapmaker_Orca is already running, that instance will be reactivated " +"If this is enabled, when starting Snapmaker Orca and another instance of the " +"same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" -msgid "Home" +msgid "Show splash screen" msgstr "" -msgid "Default Page" +msgid "Show the splash screen during startup." msgstr "" -msgid "Set the page opened on startup." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" + +msgid "Preset" +msgstr "" + +msgid "Remember printer configuration" +msgstr "" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" msgstr "" msgid "Touchpad" @@ -6195,6 +7370,12 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" msgstr "" @@ -6209,136 +7390,108 @@ msgstr "" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" +msgid "Swap pan and rotate mouse buttons" +msgstr "" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" + msgid "Reverse mouse zoom" msgstr "" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" -msgid "Show splash screen" +msgid "Clear my choice on..." msgstr "" -msgid "Show the splash screen during startup." -msgstr "" - -msgid "Show \"Tip of the day\" notification after start" -msgstr "" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "" - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "" - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "" - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "" - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" - -msgid "Remember printer configuration" -msgstr "" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" - -msgid "Auto arrange plate after cloning" -msgstr "" - -msgid "Auto arrange plate after object cloning" -msgstr "" - -msgid "Network" -msgstr "" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" - -msgid "User Sync" -msgstr "" - -msgid "Update built-in Presets automatically." -msgstr "" - -msgid "System Sync" -msgstr "" - -msgid "Clear my choice on the unsaved presets." -msgstr "" - -msgid "Associate files to Snapmaker_Orca" -msgstr "" - -msgid "Associate .3mf files to Snapmaker_Orca" -msgstr "" - -msgid "If enabled, sets Snapmaker_Orca as default application to open .3mf files" -msgstr "" - -msgid "Associate .stl files to Snapmaker_Orca" -msgstr "" - -msgid "If enabled, sets Snapmaker_Orca as default application to open .stl files" -msgstr "" - -msgid "Associate .step/.stp files to Snapmaker_Orca" -msgstr "" - -msgid "If enabled, sets Snapmaker_Orca as default application to open .step files" -msgstr "" - -msgid "Associate web links to Snapmaker_Orca" -msgstr "" - -msgid "Associate URLs to Snapmaker_Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "" - -msgid "Maximum count of recent projects" +msgid "Unsaved projects" msgstr "" msgid "Clear my choice on the unsaved projects." msgstr "" -msgid "No warnings when loading 3MF with modified G-codes" +msgid "Unsaved presets" msgstr "" -msgid "Auto-Backup" +msgid "Clear my choice on the unsaved presets." +msgstr "" + +msgid "Synchronizing printer preset" msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -msgid "every" +msgid "Login region" msgstr "" -msgid "The peroid of backup in seconds." +msgid "Stealth mode" msgstr "" -msgid "Downloads" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." msgstr "" -msgid "Dark Mode" +msgid "Network test" msgstr "" -msgid "Enable Dark mode" +msgid "Test" +msgstr "" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" + +msgid "Update built-in Presets automatically." +msgstr "" + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + +msgid "Associate files to Snapmaker Orca" +msgstr "" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "" + +msgid "Associate STL files to Snapmaker Orca" +msgstr "" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "" + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "" + +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "" + +msgid "Associate web links to Snapmaker Orca" +msgstr "" + +msgid "Developer" msgstr "" msgid "Develop mode" @@ -6347,10 +7500,41 @@ msgstr "" msgid "Skip AMS blacklist check" msgstr "" -msgid "Home page and daily tips" +msgid "Remove mixed temperature restriction" msgstr "" -msgid "Show home page on startup" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "" + +msgid "fatal" +msgstr "" + +msgid "error" +msgstr "" + +msgid "warning" +msgstr "" + +msgid "debug" +msgstr "" + +msgid "trace" +msgstr "" + +msgid "Debug" msgstr "" msgid "Sync settings" @@ -6392,24 +7576,6 @@ msgstr "" msgid "Internal developer mode" msgstr "" -msgid "Log Level" -msgstr "" - -msgid "fatal" -msgstr "" - -msgid "error" -msgstr "" - -msgid "warning" -msgstr "" - -msgid "debug" -msgstr "" - -msgid "trace" -msgstr "" - msgid "Host Setting" msgstr "" @@ -6431,10 +7597,10 @@ msgstr "" msgid "save debug settings" msgstr "" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "" msgid "System presets" @@ -6446,13 +7612,19 @@ msgstr "" msgid "Incompatible presets" msgstr "" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "" -msgid "Click to pick filament color" +msgid "Right filaments" msgstr "" -msgid "Please choose the filament colour" +msgid "Click to select filament color" msgstr "" msgid "Add/Remove presets" @@ -6464,18 +7636,33 @@ msgstr "" msgid "Project-inside presets" msgstr "" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "" msgid "Add/Remove materials" msgstr "" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "" msgid "Create printer" msgstr "" +msgid "Empty" +msgstr "" + +msgid "Incompatible" +msgstr "" + msgid "The selected preset is null!" msgstr "" @@ -6494,6 +7681,12 @@ msgstr "" msgid "Plate name" msgstr "" +msgid "Same as Global Plate Type" +msgstr "" + +msgid "Bed type" +msgstr "" + msgid "Same as Global Print Sequence" msgstr "" @@ -6512,9 +7705,6 @@ msgstr "" msgid "First layer filament sequence" msgstr "" -msgid "Same as Global Plate Type" -msgstr "" - msgid "Same as Global Bed Type" msgstr "" @@ -6533,28 +7723,28 @@ msgstr "" msgid "Slice all plate to obtain time and filament estimation" msgstr "" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "" msgid "Jump to model publish web page" msgstr "" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" msgid "Publish" msgstr "" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "" msgid "Slicing Plate 1" msgstr "" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "" msgid "Jump to webpage" @@ -6573,7 +7763,7 @@ msgstr "" msgid "Name is unavailable." msgstr "" -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "" #, possible-boost-format @@ -6581,10 +7771,11 @@ msgid "Preset \"%1%\" already exists." msgstr "" #, possible-boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" -msgid "Please note that saving action will replace this preset" +msgid "Please note that saving will overwrite this preset." msgstr "" msgid "The name cannot be the same as a preset alias name." @@ -6620,33 +7811,6 @@ msgstr "" msgid "Task canceled" msgstr "" -msgid "(LAN)" -msgstr "" - -msgid "Search" -msgstr "" - -msgid "My Device" -msgstr "" - -msgid "Other Device" -msgstr "" - -msgid "Online" -msgstr "" - -msgid "Input access code" -msgstr "" - -msgid "Can't find my devices?" -msgstr "" - -msgid "Log out successful." -msgstr "" - -msgid "Busy" -msgstr "" - msgid "Bambu Cool Plate" msgstr "" @@ -6665,13 +7829,52 @@ msgstr "" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." msgstr "" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Click here if you can't connect to the printer" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" msgid "send completed" @@ -6680,47 +7883,14 @@ msgstr "" msgid "Error code" msgstr "" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "" - -msgid "Connecting to server" -msgstr "" - -msgid "Synchronizing device information" -msgstr "" - -msgid "Synchronizing device information time out" -msgstr "" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" - -msgid "The printer is busy on other print job" +msgid "High Flow" msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "" - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" #, possible-c-format, possible-boost-format @@ -6734,32 +7904,11 @@ msgid "" "firmware to support AMS slot assignment." msgstr "" -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" - -msgid "An SD card needs to be inserted before printing." -msgstr "" - #, possible-c-format, possible-boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." -msgstr "" - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "" - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" - -msgid "Cannot send the print job for empty plate" -msgstr "" - -msgid "This printer does not support printing all plates" +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" msgid "" @@ -6768,17 +7917,25 @@ msgid "" msgstr "" msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" msgid "Errors" msgstr "" -msgid "Please check the following:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -6789,24 +7946,7 @@ msgid "" "start printing." msgstr "" -#, possible-c-format, possible-boost-format -msgid "nozzle in preset: %s %s" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" msgstr "" msgid "Please fix the error above, otherwise printing cannot continue." @@ -6817,24 +7957,202 @@ msgid "" msgstr "" msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -msgid "Automatic flow calibration using Micro Lidar" +msgid "Preparing print job" msgstr "" -msgid "Modifying the device name" +msgid "The name length exceeds the limit." msgstr "" -msgid "Bind with Pin Code" +#, possible-c-format, possible-boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" -msgid "Send to Printer SD card" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" + +msgid "Connecting to server..." +msgstr "" + +msgid "Synchronizing device information..." +msgstr "" + +msgid "Synchronizing device information timed out." +msgstr "" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" + +msgid "Cannot send a print job for an empty plate." +msgstr "" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" msgstr "" msgid "Cannot send the print task when the upgrade is in progress" @@ -6843,13 +8161,13 @@ msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" -msgid "The printer does not support sending to printer SD card." +msgid "The printer does not support sending to printer storage." msgstr "" msgid "Slice ok." @@ -6908,7 +8226,7 @@ msgstr "" msgid "Log in printer" msgstr "" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "" msgid "Check the reason" @@ -6921,10 +8239,10 @@ msgid "Terms and Conditions" msgstr "" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" @@ -6948,11 +8266,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" msgid "Statement on User Experience Improvement Plan" @@ -6991,12 +8309,27 @@ msgid "Click to reset all settings to the last saved preset." msgstr "" msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" @@ -7004,28 +8337,29 @@ msgid "Still print by object?" msgstr "" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" msgid "" @@ -7037,6 +8371,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7044,10 +8386,10 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "" msgid "Adjust" @@ -7058,16 +8400,16 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" msgid "" @@ -7077,6 +8419,75 @@ msgid "" "\"->\"Timelapse Wipe Tower\"." msgstr "" +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" + +msgid "Modifications to the current profile will be saved." +msgstr "" + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" + +msgid "Detach preset" +msgstr "" + +msgid "This is a default preset." +msgstr "" + +msgid "This is a system preset." +msgstr "" + +msgid "Current preset is inherited from the default preset." +msgstr "" + +msgid "Current preset is inherited from" +msgstr "" + +msgid "It can't be deleted or modified." +msgstr "" + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" + +msgid "To do that please specify a new name for the preset." +msgstr "" + +msgid "Additional information:" +msgstr "" + +msgid "vendor" +msgstr "" + +msgid "printer model" +msgstr "" + +msgid "default print profile" +msgstr "" + +msgid "default filament profile" +msgstr "" + +msgid "default SLA material profile" +msgstr "" + +msgid "default SLA print profile" +msgstr "" + +msgid "full profile name" +msgstr "" + +msgid "symbolic profile name" +msgstr "" + msgid "Line width" msgstr "" @@ -7140,6 +8551,9 @@ msgstr "" msgid "Support filament" msgstr "" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "" @@ -7212,65 +8626,61 @@ msgstr "" msgid "Print temperature" msgstr "" -msgid "Nozzle" -msgstr "" - -msgid "Left Nozzle" -msgstr "" - -msgid "Right Nozzle" -msgstr "" - msgid "Nozzle temperature when printing" msgstr "" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." msgstr "" -msgid "Textured Cool plate" +msgid "Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -msgid "Engineering plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." +msgstr "" + +msgid "Engineering Plate" +msgstr "" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" msgid "Smooth PEI Plate / High Temp Plate" msgstr "" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" msgid "Textured PEI Plate" msgstr "" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" msgid "Volumetric speed limitation" msgstr "" -msgid "Cooling" -msgstr "" - msgid "Cooling for specific layer" msgstr "" @@ -7316,19 +8726,31 @@ msgstr "" msgid "Wipe tower parameters" msgstr "" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" msgstr "" -msgid "Ramming settings" +msgid "Tool change parameters with single extruder MM printers" msgstr "" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Set" +msgstr "" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "" + +msgid "Dependencies" +msgstr "" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" msgstr "" msgid "Printable space" msgstr "" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, possible-boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "" @@ -7351,7 +8773,7 @@ msgstr "" msgid "Accessory" msgstr "" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "" msgid "Machine start G-code" @@ -7369,7 +8791,10 @@ msgstr "" msgid "Layer change G-code" msgstr "" -msgid "Time lapse G-code" +msgid "Timelapse G-code" +msgstr "" + +msgid "Clumping Detection G-code" msgstr "" msgid "Change filament G-code" @@ -7390,6 +8815,12 @@ msgstr "" msgid "Normal" msgstr "" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "" @@ -7399,14 +8830,14 @@ msgstr "" msgid "Jerk limitation" msgstr "" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "" msgid "Number of extruders of the printer." msgstr "" msgid "" -"Single Extruder Multi Material is selected, \n" +"Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" @@ -7418,18 +8849,18 @@ msgstr "" msgid "Wipe tower" msgstr "" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "" msgid "" -"This is a single extruder multimaterial printer, diameters of all extruders " +"This is a single extruder multi-material printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" msgid "Layer height limits" msgstr "" -msgid "Lift Z Enforcement" +msgid "Z-Hop" msgstr "" msgid "Retraction when switching material" @@ -7444,6 +8875,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "" @@ -7453,7 +8892,7 @@ msgid "" "presets would be deleted if the printer is deleted." msgstr "" -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "" msgid "The following presets inherit this preset." @@ -7471,20 +8910,16 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "" msgstr[1] "" -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" - #, possible-boost-format msgid "Are you sure to %1% the selected preset?" msgstr "" -msgid "All" +#, possible-c-format, possible-boost-format +msgid "Left: %s" msgstr "" -msgid "Set" +#, possible-c-format, possible-boost-format +msgid "Right: %s" msgstr "" msgid "Click to reset current value and attach to the global value." @@ -7567,7 +9002,7 @@ msgid "" msgstr "" #, possible-boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "" msgid "" @@ -7593,9 +9028,6 @@ msgstr "" msgid "Extruders count" msgstr "" -msgid "General" -msgstr "" - msgid "Capabilities" msgstr "" @@ -7654,6 +9086,9 @@ msgstr "" msgid "Model Name" msgstr "" +msgid "Description:" +msgstr "" + #, possible-c-format, possible-boost-format msgid "%s Update" msgstr "" @@ -7664,31 +9099,25 @@ msgstr "" msgid "Configuration update" msgstr "" -msgid "A new configuration package available, Do you want to install it?" -msgstr "" - -msgid "Description:" +msgid "A new configuration package is available. Do you want to install it?" msgstr "" msgid "Configuration incompatible" msgstr "" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" #, possible-c-format, possible-boost-format msgid "Exit %s" msgstr "" -msgid "the Configuration package is incompatible with current APP." -msgstr "" - msgid "Configuration updates" msgstr "" @@ -7698,23 +9127,40 @@ msgstr "" msgid "The configuration is up to date." msgstr "" -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." msgstr "" msgid "Specify number of colors:" msgstr "" -#, possible-c-format, possible-boost-format -msgid "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" msgstr "" msgid "Recommended " msgstr "" -msgid "Current filament colors:" +msgid "view" msgstr "" -msgid "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" msgstr "" msgid "Color match" @@ -7726,26 +9172,170 @@ msgstr "" msgid "Append" msgstr "" -msgid "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" msgstr "" msgid "Reset mapped extruders." msgstr "" -msgid "Cluster colors" -msgstr "" - -msgid "Map Filament" +msgid "Note" msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" msgid "Ramming customization" @@ -7763,33 +9353,23 @@ msgid "" "jams, extruder wheel grinding into filament etc." msgstr "" -msgid "Total ramming time" +#, possible-boost-format +msgid "For constant flow rate, hold %1% while dragging." msgstr "" -msgid "s" +msgid "Total ramming" msgstr "" -msgid "Total rammed volume" +msgid "Volume" msgstr "" -msgid "Ramming line width" -msgstr "" - -msgid "Ramming line spacing" -msgstr "" - -msgid "Auto-Calc" -msgstr "" - -msgid "Re-calculate" -msgstr "" - -msgid "Flushing volumes for filament change" +msgid "Ramming line" msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -7803,22 +9383,22 @@ msgstr "" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "" +msgid "Re-calculate" +msgstr "" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "" -msgid "unloaded" +msgid "Flushing volumes for filament change" msgstr "" -msgid "loaded" -msgstr "" - -msgid "Filament #" -msgstr "" - -msgid "From" -msgstr "" - -msgid "To" +msgid "Please choose the filament colour" msgstr "" msgid "" @@ -7833,7 +9413,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -7843,7 +9423,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" @@ -7871,9 +9451,6 @@ msgstr "" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "" -msgid "Shift+G" -msgstr "" - msgid "Paste from clipboard" msgstr "" @@ -7889,31 +9466,22 @@ msgstr "" msgid "Global shortcuts" msgstr "" -msgid "Rotate View" -msgstr "" - msgid "Pan View" msgstr "" -msgid "Mouse wheel" +msgid "Rotate View" msgstr "" msgid "Zoom View" msgstr "" -msgid "Shift+A" -msgstr "" - -msgid "Shift+R" -msgstr "" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -msgid "Shift+Tab" +msgid "Auto orients all objects on the active plate." msgstr "" msgid "Collapse/Expand the sidebar" @@ -7931,9 +9499,6 @@ msgstr "" msgid "Select multiple objects" msgstr "" -msgid "Shift+Left mouse button" -msgstr "" - msgid "Select objects by rectangle" msgstr "" @@ -7961,9 +9526,6 @@ msgstr "" msgid "Move selection 10 mm in positive X direction" msgstr "" -msgid "Shift+Any arrow" -msgstr "" - msgid "Movement step set to 1 mm" msgstr "" @@ -7997,16 +9559,22 @@ msgstr "" msgid "Gizmo move" msgstr "" +msgid "Gizmo rotate" +msgstr "" + msgid "Gizmo scale" msgstr "" -msgid "Gizmo rotate" +msgid "Gizmo place face on bed" msgstr "" msgid "Gizmo cut" msgstr "" -msgid "Gizmo Place face on bed" +msgid "Gizmo mesh boolean" +msgstr "" + +msgid "Gizmo FDM paint-on fuzzy skin" msgstr "" msgid "Gizmo SLA support points" @@ -8015,7 +9583,16 @@ msgstr "" msgid "Gizmo FDM paint-on seam" msgstr "" -msgid "Gizmo Text emboss / engrave" +msgid "Gizmo text emboss/engrave" +msgstr "" + +msgid "Gizmo measure" +msgstr "" + +msgid "Gizmo assemble" +msgstr "" + +msgid "Gizmo brim ears" msgstr "" msgid "Zoom in" @@ -8045,7 +9622,7 @@ msgstr "" msgid "Set extruder number for the objects and parts" msgstr "" -msgid "Delete objects, parts, modifiers " +msgid "Delete objects, parts, modifiers" msgstr "" msgid "Select the object/part and press space to change the name" @@ -8075,15 +9652,12 @@ msgstr "" msgid "On/Off one layer mode of the vertical slider" msgstr "" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "" msgid "Move slider 5x faster" msgstr "" -msgid "Shift+Mouse wheel" -msgstr "" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8094,7 +9668,7 @@ msgid "Release Note" msgstr "" #, possible-c-format, possible-boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "" msgid "Network plug-in update" @@ -8105,7 +9679,7 @@ msgid "" msgstr "" #, possible-c-format, possible-boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "" msgid "New version of Snapmaker Orca" @@ -8114,58 +9688,28 @@ msgstr "" msgid "Skip this Version" msgstr "" -msgid "Done" -msgstr "" - -msgid "resume" -msgstr "" - -msgid "Resume Printing" -msgstr "" - -msgid "Resume Printing(defects acceptable)" -msgstr "" - -msgid "Resume Printing(problem solved)" -msgstr "" - -msgid "Stop Printing" -msgstr "" - -msgid "Check Assistant" -msgstr "" - -msgid "Filament Extruded, Continue" -msgstr "" - -msgid "Not Extruded Yet, Retry" -msgstr "" - -msgid "Finished, Continue" -msgstr "" - -msgid "Load Filament" -msgstr "" - -msgid "Filament Loaded, Resume" -msgstr "" - -msgid "View Liveview" -msgstr "" - msgid "Confirm and Update Nozzle" msgstr "" -msgid "LAN Connection Failed (Sending print file)" +msgid "Connect the printer using IP and access code" msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" msgid "IP" @@ -8174,18 +9718,42 @@ msgstr "" msgid "Access Code" msgstr "" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "" -msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" msgstr "" -msgid "Test" +msgid "Manual Setup" msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "" +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" + msgid "Connection failed, please double check IP and Access Code" msgstr "" @@ -8194,31 +9762,51 @@ msgid "" "please move to step 3 for troubleshooting network issues" msgstr "" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "" -msgid "Serial:" -msgstr "" - -msgid "Version:" -msgstr "" - msgid "Update firmware" msgstr "" msgid "Beta version" msgstr "" -msgid "Latest version" -msgstr "" - msgid "Updating" msgstr "" -msgid "Updating failed" +msgid "Update failed" msgstr "" -msgid "Updating successful" +msgid "Update successful" msgstr "" msgid "" @@ -8241,7 +9829,7 @@ msgstr "" msgid "Extension Board" msgstr "" -msgid "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." msgstr "" msgid "Only Windows 10 is supported." @@ -8265,22 +9853,22 @@ msgstr "" msgid "Loading repaired objects" msgstr "" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "" -msgid "Repaired 3mf file does not contain any object" +msgid "Repaired 3MF file does not contain any object" msgstr "" -msgid "Repaired 3mf file contains more than one object" +msgid "Repaired 3MF file contains more than one object" msgstr "" -msgid "Repaired 3mf file does not contain any volume" +msgid "Repaired 3MF file does not contain any volume" msgstr "" -msgid "Repaired 3mf file contains more than one volume" +msgid "Repaired 3MF file contains more than one volume" msgstr "" msgid "Repair finished" @@ -8332,7 +9920,7 @@ msgid "" msgstr "" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" @@ -8343,6 +9931,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "" @@ -8380,7 +9977,7 @@ msgid "Multiple" msgstr "" #, possible-boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" msgid "" @@ -8494,10 +10091,12 @@ msgstr "" msgid "%1% is too tall, and collisions will be caused." msgstr "" -msgid " is too close to others, there may be collisions when printing." +msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" -msgid " is too close to exclusion area, there may be collisions when printing." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." msgstr "" msgid "Prime Tower" @@ -8510,9 +10109,33 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" msgid "No extrusions under current settings." @@ -8523,6 +10146,15 @@ msgid "" "enabled." msgstr "" +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -8533,6 +10165,12 @@ msgid "" "materials." msgstr "" +#, possible-boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" + #, possible-boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "" @@ -8580,15 +10218,21 @@ msgid "" "requires that all objects have the same layer height." msgstr "" -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." +msgstr "" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." msgstr "" msgid "" @@ -8598,7 +10242,11 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." +msgstr "" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." msgstr "" msgid "Too small line width" @@ -8607,6 +10255,13 @@ msgstr "" msgid "Too large line width" msgstr "" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -8630,7 +10285,7 @@ msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "" msgid "" @@ -8666,6 +10321,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -8684,6 +10348,16 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" + msgid "Generating skirt & brim" msgstr "" @@ -8696,9 +10370,15 @@ msgstr "" msgid "Failed processing of the filename_format template." msgstr "" +msgid "Printer technology" +msgstr "" + msgid "Printable area" msgstr "" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "" @@ -8718,8 +10398,8 @@ msgid "Elephant foot compensation" msgstr "" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" msgid "Elephant foot compensation layers" @@ -8737,19 +10417,27 @@ msgstr "" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" msgid "Printable height" msgstr "" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "" + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." msgstr "" msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -8758,7 +10446,7 @@ msgstr "" msgid "Use 3rd-party print host" msgstr "" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" msgid "Hostname, IP or URL" @@ -8776,7 +10464,7 @@ msgid "Device UI" msgstr "" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" msgid "API Key / Password" @@ -8787,7 +10475,7 @@ msgid "" "contain the API Key or the password required for authentication." msgstr "" -msgid "Name of the printer" +msgid "Name of the printer." msgstr "" msgid "HTTPS CA File" @@ -8814,7 +10502,7 @@ msgid "" "certificates if connection fails." msgstr "" -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "" msgid "Authorization Type" @@ -8826,20 +10514,21 @@ msgstr "" msgid "HTTP digest" msgstr "" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" msgid "mm or %" @@ -8849,31 +10538,33 @@ msgid "Other layers" msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" - -msgid "°C" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" msgid "Initial layer" @@ -8883,43 +10574,49 @@ msgid "Initial layer bed temperature" msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -msgid "Bed types supported by the printer" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" + +msgid "Bed types supported by the printer." msgstr "" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" @@ -8934,7 +10631,7 @@ msgstr "" msgid "Other layers filament sequence" msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" msgid "Bottom shell layers" @@ -8943,7 +10640,7 @@ msgstr "" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" msgid "Bottom shell thickness" @@ -8953,22 +10650,39 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -8980,55 +10694,102 @@ msgstr "" msgid "Nowhere" msgstr "" -msgid "Force cooling for overhang and bridge" +msgid "Force cooling for overhangs and bridges" msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -msgid "Fan speed for overhang" +msgid "Overhangs and external bridges fan speed" msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -msgid "Cooling overhang threshold" +msgid "Overhang cooling activation threshold" msgstr "" -#, possible-c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -msgid "Bridge infill direction" +msgid "External bridge infill direction" msgstr "" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -msgid "Bridge density" +msgid "Internal bridge infill direction" msgstr "" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" msgid "Bridge flow ratio" msgstr "" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Internal bridge flow ratio" @@ -9037,7 +10798,11 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9045,13 +10810,117 @@ msgstr "" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Bottom surface flow ratio" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" @@ -9059,17 +10928,16 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" msgid "One wall threshold" @@ -9092,7 +10960,7 @@ msgstr "" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" msgid "Extra perimeters on overhangs" @@ -9100,10 +10968,10 @@ msgstr "" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "" msgid "Overhang reversal" @@ -9111,7 +10979,7 @@ msgstr "" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9122,7 +10990,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9131,9 +10999,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9142,9 +11010,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9163,53 +11031,65 @@ msgstr "" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" msgid "Slow down for overhang" msgstr "" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" msgid "Slow down for curled perimeters" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" msgid "mm/s or %" msgstr "" -msgid "External" -msgstr "" - -msgid "Speed of bridge and completely overhang wall" -msgstr "" - -msgid "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" msgid "Internal" msgstr "" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" msgid "Brim width" msgstr "" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "" msgid "Brim type" @@ -9217,7 +11097,7 @@ msgstr "" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" msgid "Brim-object gap" @@ -9225,7 +11105,7 @@ msgstr "" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" msgid "Brim ears" @@ -9238,8 +11118,8 @@ msgid "Brim ear max angle" msgstr "" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" @@ -9247,27 +11127,36 @@ msgid "Brim ear detection radius" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -msgid "Compatible machine" +msgid "Select printers" msgstr "" msgid "upward compatible machine" msgstr "" -msgid "Compatible machine condition" +msgid "Condition" msgstr "" -msgid "Compatible process profiles" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." msgstr "" -msgid "Compatible process profiles condition" +msgid "Select profiles" msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" + +msgid "Print sequence, layer by layer or object by object." msgstr "" msgid "By layer" @@ -9279,7 +11168,7 @@ msgstr "" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -9292,7 +11181,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" msgid "Normal printing" @@ -9300,22 +11189,19 @@ msgstr "" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" -msgstr "" - -msgid "mm/s²" +"layer." msgstr "" msgid "Default filament profile" msgstr "" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" msgid "Default process profile" msgstr "" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "" msgid "Activate air filtration" @@ -9328,30 +11214,30 @@ msgid "Fan speed" msgstr "" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "" msgid "No cooling for the first" msgstr "" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" msgid "Don't support bridges" msgstr "" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" -msgid "Thick bridges" +msgid "Thick external bridges" msgstr "" msgid "" @@ -9369,41 +11255,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -9422,18 +11349,18 @@ msgstr "" msgid "End G-code" msgstr "" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "" msgid "Ensure vertical shell thickness" @@ -9459,13 +11386,7 @@ msgstr "" msgid "Top surface pattern" msgstr "" -msgid "Line pattern of top surface infill" -msgstr "" - -msgid "Concentric" -msgstr "" - -msgid "Rectilinear" +msgid "Line pattern of top surface infill." msgstr "" msgid "Monotonic" @@ -9474,9 +11395,15 @@ msgstr "" msgid "Monotonic line" msgstr "" +msgid "Rectilinear" +msgstr "" + msgid "Aligned Rectilinear" msgstr "" +msgid "Concentric" +msgstr "" + msgid "Hilbert Curve" msgstr "" @@ -9489,7 +11416,7 @@ msgstr "" msgid "Bottom surface pattern" msgstr "" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" msgid "Internal solid infill pattern" @@ -9524,17 +11451,17 @@ msgid "Small perimeters threshold" msgstr "" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -9544,15 +11471,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -9572,7 +11497,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -9586,10 +11511,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -9632,7 +11557,7 @@ msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " "probe's XY offset, most printers are unable to probe the entire bed. To " "ensure the probe point does not go outside the bed area, the minimum and " -"maximum points of the bed mesh should be set appropriately. Snapmaker_Orca " +"maximum points of the bed mesh should be set appropriately. Snapmaker Orca " "ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " "exceed these min/max points. This information can usually be obtained from " "your printer manufacturer. The default setting is (-99999, -99999), which " @@ -9646,7 +11571,7 @@ msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " "probe's XY offset, most printers are unable to probe the entire bed. To " "ensure the probe point does not go outside the bed area, the minimum and " -"maximum points of the bed mesh should be set appropriately. Snapmaker_Orca " +"maximum points of the bed mesh should be set appropriately. Snapmaker Orca " "ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " "exceed these min/max points. This information can usually be obtained from " "your printer manufacturer. The default setting is (99999, 99999), which " @@ -9669,10 +11594,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "" msgid "Extruder offset" @@ -9682,22 +11610,33 @@ msgid "Flow ratio" msgstr "" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." +msgstr "" + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." msgstr "" msgid "Enable pressure advance" msgstr "" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" msgid "Enable adaptive pressure advance (beta)" @@ -9716,11 +11655,11 @@ msgid "" "your printer's extrusion system depending on the volumetric flow speed and " "acceleration it is printing at. Internally, it generates a fitted model that " "can extrapolate the needed pressure advance for any given volumetric flow " -"speed and acceleration, which is then emmited to the printer depending on " +"speed and acceleration, which is then emitted to the printer depending on " "the current print conditions.\n" "\n" -"When enabled, the pressure advance value above is overriden. However, a " -"reasonable default value above is strongly recomended to act as a fallback " +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " "and for when tool changing.\n" "\n" msgstr "" @@ -9744,19 +11683,18 @@ msgid "" "external perimeters, the speed of the internal perimeters and the fastest " "feature print speed in your profile (usually its the sparse or solid " "infill). Then run them for the same speeds for the slowest and fastest print " -"accelerations,and no faster than the recommended maximum acceleration as " -"given by the klipper input shaper.\n" +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and " "acceleration. You can find the flow number by selecting flow from the color " "scheme drop down and move the horizontal slider over the PA pattern lines. " "The number should be visible at the bottom of the page. The ideal PA value " "should be decreasing the higher the volumetric flow is. If it is not, " -"confirm that your extruder is functioning correctly.The slower and with less " -"acceleration you print, the larger the range of acceptable PA values. If no " -"difference is visible, use the PA value from the faster test.3. Enter the " -"triplets of PA values, Flow and Accelerations in the text box here and save " -"your filament profile\n" -"\n" +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" msgstr "" msgid "Enable adaptive pressure advance for overhangs (beta)" @@ -9773,12 +11711,12 @@ msgid "Pressure advance for bridges" msgstr "" msgid "" -"Pressure advance value for bridges. Set to 0 to disable. \n" +"Pressure advance value for bridges. Set to 0 to disable.\n" "\n" -" A lower PA value when printing bridges helps reduce the appearance of " -"slight under extrusion immediately after bridges. This is caused by the " -"pressure drop in the nozzle when printing in the air and a lower PA helps " -"counteract this." +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" msgid "" @@ -9790,8 +11728,9 @@ msgid "Keep fan always on" msgstr "" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" msgid "Don't slow down outer walls" @@ -9801,13 +11740,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -9816,13 +11753,15 @@ msgstr "" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" msgid "Default color" msgstr "" -msgid "Default filament color" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." msgstr "" msgid "Filament notes" @@ -9839,37 +11778,95 @@ msgid "" "of nozzle's HRC." msgstr "" +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" -msgstr "" - -msgid "mm³/s" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" msgid "Filament load time" msgstr "" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" msgid "Filament unload time" msgstr "" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -9878,18 +11875,46 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "" @@ -9906,7 +11931,7 @@ msgid "Unloading speed" msgstr "" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" @@ -9921,8 +11946,8 @@ msgid "Delay after unloading" msgstr "" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" @@ -9944,7 +11969,7 @@ msgid "Stamping distance measured from the center of the cooling tube" msgstr "" msgid "" -"If set to nonzero value, filament is moved toward the nozzle between the " +"If set to non-zero value, filament is moved toward the nozzle between the " "individual cooling moves (\"stamping\"). This option configures how long " "this movement should be before the filament is retracted again." msgstr "" @@ -9972,12 +11997,6 @@ msgstr "" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - msgid "Ramming parameters" msgstr "" @@ -9986,58 +12005,63 @@ msgid "" "parameters." msgstr "" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" msgid "Density" msgstr "" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "" -msgid "g/cm³" -msgstr "" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "" msgid "Soluble material" msgstr "" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." msgstr "" msgid "Support material" msgstr "" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." +msgstr "" + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" msgid "Softening temperature" @@ -10045,14 +12069,14 @@ msgstr "" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" msgid "Price" msgstr "" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "" msgid "money/kg" @@ -10061,7 +12085,7 @@ msgstr "" msgid "Vendor" msgstr "" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "" msgid "(Undefined)" @@ -10072,7 +12096,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" msgid "Solid infill direction" @@ -10080,13 +12104,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10095,37 +12113,66 @@ msgstr "" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "" -msgid "Grid" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" msgstr "" msgid "Line" msgstr "" -msgid "Cubic" +msgid "Grid" msgstr "" msgid "Tri-hexagon" msgstr "" -msgid "Gyroid" -msgstr "" - -msgid "Honeycomb" +msgid "Cubic" msgstr "" msgid "Adaptive Cubic" msgstr "" -msgid "3D Honeycomb" +msgid "Quarter Cubic" msgstr "" msgid "Support Cubic" @@ -10134,9 +12181,53 @@ msgstr "" msgid "Lightning" msgstr "" +msgid "Honeycomb" +msgstr "" + +msgid "3D Honeycomb" +msgstr "" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "" @@ -10148,7 +12239,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -10170,7 +12261,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10178,21 +12269,21 @@ msgstr "" msgid "0 (Simple connect)" msgstr "" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" msgid "" @@ -10216,13 +12307,13 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" msgid "Enable accel_to_decel" msgstr "" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" msgid "accel_to_decel" @@ -10230,25 +12321,36 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -msgid "Jerk of outer walls" +msgid "Default jerk." msgstr "" -msgid "Jerk of inner walls" +msgid "Junction Deviation" msgstr "" -msgid "Jerk for top surface" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." msgstr "" -msgid "Jerk for infill" +msgid "Jerk of outer walls." msgstr "" -msgid "Jerk for initial layer" +msgid "Jerk of inner walls." msgstr "" -msgid "Jerk for travel" +msgid "Jerk for top surface." +msgstr "" + +msgid "Jerk for infill." +msgstr "" + +msgid "Jerk for initial layer." +msgstr "" + +msgid "Jerk for travel." msgstr "" msgid "" @@ -10261,22 +12363,22 @@ msgstr "" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "" msgid "Initial layer infill" msgstr "" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "" msgid "Initial layer travel speed" msgstr "" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "" msgid "Number of slow layers" @@ -10290,7 +12392,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" msgid "Full fan speed at layer" @@ -10311,15 +12413,39 @@ msgid "Support interface fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" msgid "Contour" @@ -10335,22 +12461,111 @@ msgid "Fuzzy skin thickness" msgstr "" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" msgid "Fuzzy skin point distance" msgstr "" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" @@ -10359,19 +12574,22 @@ msgstr "" msgid "Layers and Perimeters" msgstr "" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" msgid "Precise Z height" msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -10381,9 +12599,9 @@ msgstr "" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -10393,7 +12611,8 @@ msgstr "" msgid "Add line number" msgstr "" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" msgid "Scan first layer" @@ -10401,7 +12620,7 @@ msgstr "" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" msgid "Nozzle type" @@ -10409,7 +12628,7 @@ msgstr "" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" msgid "Undefine" @@ -10421,6 +12640,9 @@ msgstr "" msgid "Stainless steel" msgstr "" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "" @@ -10438,7 +12660,7 @@ msgstr "" msgid "Printer structure" msgstr "" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "" msgid "CoreXY" @@ -10469,10 +12691,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" @@ -10496,7 +12718,7 @@ msgstr "" msgid "Time cost" msgstr "" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "" msgid "money/h" @@ -10521,7 +12743,7 @@ msgstr "" msgid "G-code flavor" msgstr "" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "" msgid "Klipper" @@ -10530,20 +12752,20 @@ msgstr "" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -10552,7 +12774,7 @@ msgstr "" msgid "Exclude objects" msgstr "" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" msgid "Verbose G-code" @@ -10572,6 +12794,128 @@ msgid "" "reduce time. Wall is still printed with original layer height." msgstr "" +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "" @@ -10598,12 +12942,18 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." +msgstr "" + +msgid "Inherits profile" +msgstr "" + +msgid "Name of parent profile." msgstr "" msgid "Interface shells" @@ -10612,7 +12962,7 @@ msgstr "" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" msgid "Maximum width of a segmented region" @@ -10627,7 +12977,7 @@ msgstr "" msgid "" "Interlocking depth of a segmented region. It will be ignored if " "\"mmu_segmented_region_max_width\" is zero or if " -"\"mmu_segmented_region_interlocking_depth\"is bigger then " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " "\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" @@ -10699,7 +13049,7 @@ msgstr "" msgid "Ironing Pattern" msgstr "" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "" msgid "Ironing flow" @@ -10707,30 +13057,45 @@ msgstr "" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" msgid "Ironing line spacing" msgstr "" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." +msgstr "" + +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." msgstr "" msgid "Ironing speed" msgstr "" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "" -msgid "Ironing angle" +msgid "Ironing angle offset" msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "The angle of ironing lines offset from the top surface." msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "" + +msgid "Clumping detection G-code" msgstr "" msgid "Supports silent mode" @@ -10738,7 +13103,7 @@ msgstr "" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" msgid "Emit limits to G-code" @@ -10749,21 +13114,21 @@ msgstr "" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "" msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -10772,8 +13137,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -10848,6 +13213,15 @@ msgstr "" msgid "Maximum jerk of the E axis" msgstr "" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "" @@ -10875,20 +13249,38 @@ msgstr "" msgid "Maximum acceleration for travel" msgstr "" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" + +msgid "Resonance avoidance" msgstr "" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "" + +msgid "Minimum speed of resonance avoidance." msgstr "" msgid "Max" msgstr "" +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" msgid "Extrusion rate smoothing" @@ -10900,47 +13292,54 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -msgid "mm³/s²" -msgstr "" - msgid "Smoothing segment length" msgstr "" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "" msgid "" @@ -10951,24 +13350,21 @@ msgid "" "command: M106 P2 S(0-255)" msgstr "" -msgid "Min" -msgstr "" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" msgid "Min print speed" msgstr "" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "" msgid "Configuration notes" @@ -10990,7 +13386,7 @@ msgstr "" msgid "Nozzle volume" msgstr "" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "" msgid "Cooling tube position" @@ -11028,7 +13424,7 @@ msgstr "" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" @@ -11044,7 +13440,7 @@ msgstr "" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" msgid "" @@ -11055,7 +13451,7 @@ msgstr "" msgid "Filename format" msgstr "" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" msgid "Make overhangs printable" @@ -11078,10 +13474,7 @@ msgstr "" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." -msgstr "" - -msgid "mm²" +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" msgid "Detect overhang wall" @@ -11093,15 +13486,18 @@ msgid "" "speed to print. For 100%% overhang, bridge speed is used." msgstr "" +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "" msgid "Alternate extra wall" @@ -11109,10 +13505,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11126,34 +13522,43 @@ msgid "" "environment variables." msgstr "" +msgid "Printer type" +msgstr "" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" msgstr "" msgid "You can put your notes regarding the printer here." msgstr "" +msgid "Printer variant" +msgstr "" + msgid "Raft contact Z distance" msgstr "" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" msgid "Raft expansion" msgstr "" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "" msgid "Initial layer density" msgstr "" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "" msgid "Initial layer expansion" msgstr "" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" msgid "Raft layers" @@ -11161,13 +13566,13 @@ msgstr "" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" msgid "Travel distance threshold" @@ -11175,20 +13580,20 @@ msgstr "" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" msgid "Retract amount before wipe" msgstr "" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" msgid "Retract when change layer" msgstr "" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "" msgid "Retraction Length" @@ -11196,15 +13601,15 @@ msgstr "" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" @@ -11213,36 +13618,45 @@ msgid "Retraction distance when cut" msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -msgid "Z hop when retract" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -msgid "Z hop type" +msgid "Z-hop type" +msgstr "" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" @@ -11255,8 +13669,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -11279,7 +13693,7 @@ msgid "On surfaces" msgstr "" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" @@ -11295,6 +13709,18 @@ msgstr "" msgid "Top and Bottom" msgstr "" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "" @@ -11311,15 +13737,15 @@ msgstr "" msgid "Retraction Speed" msgstr "" -msgid "Speed of retractions" +msgid "Speed for retracting filament from the nozzle." msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" msgid "Use firmware retraction" @@ -11337,13 +13763,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "" msgid "Nearest" @@ -11352,6 +13778,9 @@ msgstr "" msgid "Aligned" msgstr "" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "" @@ -11418,13 +13847,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -11472,9 +13901,10 @@ msgid "Role base wipe speed" msgstr "" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" msgid "Wipe on loops" @@ -11489,15 +13919,15 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" @@ -11505,21 +13935,38 @@ msgstr "" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" msgid "Skirt distance" msgstr "" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." +msgstr "" + +msgid "Skirt start point" +msgstr "" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." msgstr "" msgid "Skirt height" msgstr "" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." +msgstr "" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." msgstr "" msgid "Draft shield" @@ -11528,27 +13975,33 @@ msgstr "" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" +msgid "Enabled" msgstr "" -msgid "Enabled" +msgid "Skirt type" +msgstr "" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" + +msgid "Per object" msgstr "" msgid "Skirt loops" msgstr "" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "" msgid "Skirt speed" @@ -11564,13 +14017,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" msgid "Minimum sparse infill threshold" @@ -11578,7 +14034,13 @@ msgstr "" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." +msgstr "" + +msgid "Solid infill" +msgstr "" + +msgid "Filament to print solid infill." msgstr "" msgid "" @@ -11586,29 +14048,51 @@ msgid "" "computed over the nozzle diameter." msgstr "" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" msgid "Smooth Spiral" msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" msgid "Max XY Smoothing" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." msgstr "" msgid "" @@ -11631,7 +14115,7 @@ msgstr "" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "" "Temperature difference to be applied when an extruder is not active. The " -"value is not used when 'idle_temperature' in filament settings is set to non " +"value is not used when 'idle_temperature' in filament settings is set to non-" "zero value." msgstr "" @@ -11649,23 +14133,23 @@ msgid "Preheat steps" msgstr "" msgid "" -"Insert multiple preheat commands(e.g. M104.1). Only useful for Prusa XL. For " -"other printers, please set it to 1." +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." msgstr "" msgid "Start G-code" msgstr "" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "" msgid "Single Extruder Multi Material" msgstr "" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" msgid "Manual Filament Change" @@ -11682,7 +14166,7 @@ msgstr "" msgid "Purge in prime tower" msgstr "" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "" msgid "Enable filament ramming" @@ -11692,8 +14176,8 @@ msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -11749,27 +14233,33 @@ msgid "Enable support generation." msgstr "" msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." +msgstr "" + +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." msgstr "" msgid "Pattern angle" @@ -11781,7 +14271,7 @@ msgstr "" msgid "On build plate only" msgstr "" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "" msgid "Support critical regions only" @@ -11792,22 +14282,22 @@ msgid "" "etc." msgstr "" -msgid "Remove small overhangs" +msgid "Ignore small overhangs" msgstr "" -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs that possibly don't require support." msgstr "" msgid "Top Z distance" msgstr "" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" msgid "Bottom Z distance" msgstr "" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "" msgid "Support/raft base" @@ -11815,7 +14305,7 @@ msgstr "" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" msgid "Avoid interface filament for base" @@ -11842,19 +14332,19 @@ msgstr "" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" msgid "Top interface layers" msgstr "" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "" msgid "Bottom interface layers" msgstr "" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "" msgid "Same as top" @@ -11863,22 +14353,24 @@ msgstr "" msgid "Top interface spacing" msgstr "" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" msgid "Bottom interface spacing" msgstr "" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "" msgid "Base pattern" msgstr "" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "" msgid "Rectilinear grid" @@ -11893,7 +14385,7 @@ msgstr "" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" msgid "Rectilinear Interlaced" @@ -11902,16 +14394,16 @@ msgstr "" msgid "Base pattern spacing" msgstr "" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "" msgid "Normal Support expansion" msgstr "" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" -msgid "Speed of support" +msgid "Speed of support." msgstr "" msgid "" @@ -11924,9 +14416,15 @@ msgid "" "overhangs." msgstr "" +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" msgstr "" +msgid "Organic" +msgstr "" + msgid "Tree Slim" msgstr "" @@ -11936,15 +14434,12 @@ msgstr "" msgid "Tree Hybrid" msgstr "" -msgid "Organic" -msgstr "" - msgid "Independent support layer height" msgstr "" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" @@ -11956,12 +14451,21 @@ msgid "" "threshold." msgstr "" +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" @@ -11994,26 +14498,18 @@ msgid "" "needed." msgstr "" -msgid "Adaptive layer height" -msgstr "" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - msgid "Auto brim width" msgstr "" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" msgid "Tree support brim width" msgstr "" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" msgid "Tip Diameter" @@ -12041,20 +14537,12 @@ msgid "" "support." msgstr "" -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" - msgid "Support wall loops" msgstr "" -msgid "This setting specify the count of walls around support" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." msgstr "" msgid "Tree support with infill" @@ -12062,32 +14550,74 @@ msgstr "" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." +msgstr "" + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" msgstr "" msgid "Activate temperature control" msgstr "" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" msgid "Chamber temperature" msgstr "" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "" msgid "Detect thin wall" @@ -12095,15 +14625,15 @@ msgstr "" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" msgid "" @@ -12111,7 +14641,7 @@ msgid "" "the nozzle diameter." msgstr "" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "" msgid "Top shell layers" @@ -12120,7 +14650,7 @@ msgstr "" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" msgid "Top solid layers" @@ -12133,31 +14663,51 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "" msgid "Wipe while retracting" msgstr "" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" msgid "Wipe Distance" msgstr "" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -12169,6 +14719,12 @@ msgid "" "appearance defects when printing objects." msgstr "" +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "" @@ -12186,13 +14742,18 @@ msgstr "" msgid "The volume of material to prime extruder on tower." msgstr "" -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "" msgid "Wipe tower rotation angle" msgstr "" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "" + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." msgstr "" msgid "Stabilization cone apex angle" @@ -12220,7 +14781,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -12228,6 +14789,39 @@ msgid "" "regardless of this setting." msgstr "" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" + msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." @@ -12242,6 +14836,18 @@ msgid "" "volumes below." msgstr "" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -12257,8 +14863,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" msgid "Maximal bridging distance" @@ -12286,7 +14892,7 @@ msgid "Idle temperature" msgstr "" msgid "" -"Nozzle temperature when the tool is currently not used in multi-tool setups." +"Nozzle temperature when the tool is currently not used in multi-tool setups. " "This is only used when 'Ooze prevention' is active in Print Settings. Set to " "0 to disable." msgstr "" @@ -12295,19 +14901,20 @@ msgid "X-Y hole compensation" msgstr "" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" msgid "X-Y contour compensation" msgstr "" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" msgid "Convert holes to polyholes" @@ -12327,7 +14934,7 @@ msgstr "" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -12351,26 +14958,23 @@ msgstr "" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" msgid "Use relative E distances" msgstr "" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" -msgstr "" - -msgid "Classic" +"variable extrusion width." msgstr "" msgid "Arachne" @@ -12382,7 +14986,7 @@ msgstr "" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" msgid "Wall transitioning filter margin" @@ -12395,7 +14999,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" msgid "Wall transitioning threshold angle" @@ -12406,7 +15010,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" msgid "Wall distribution count" @@ -12414,7 +15018,7 @@ msgstr "" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" msgid "Minimum feature size" @@ -12422,9 +15026,9 @@ msgstr "" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" msgid "Minimum wall length" @@ -12435,9 +15039,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" @@ -12457,16 +15061,16 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" msgid "Detect narrow internal solid infill" msgstr "" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" msgid "invalid value " @@ -12481,23 +15085,142 @@ msgstr "" msgid " not in range " msgstr "" +msgid "Export 3MF" +msgstr "" + +msgid "Export project as 3MF." +msgstr "" + +msgid "Export slicing data" +msgstr "" + +msgid "Export slicing data to a folder." +msgstr "" + +msgid "Load slicing data" +msgstr "" + +msgid "Load cached slicing data from directory." +msgstr "" + +msgid "Export STL" +msgstr "" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "" + +msgid "Show command help." +msgstr "" + +msgid "UpToDate" +msgstr "" + +msgid "Update the config values of 3MF to latest." +msgstr "" + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "" + +msgid "Load first filament as default for those not loaded." +msgstr "" + msgid "Minimum save" msgstr "" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." +msgstr "" + +msgid "mtcpp" +msgstr "" + +msgid "max triangle count per plate for slicing." +msgstr "" + +msgid "mstpp" +msgstr "" + +msgid "max slicing time per plate in seconds." msgstr "" msgid "No check" msgstr "" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" + +msgid "Normative check" +msgstr "" + +msgid "Check the normative items." +msgstr "" + +msgid "Output Model Info" +msgstr "" + +msgid "Output the model's information." +msgstr "" + +msgid "Export Settings" +msgstr "" + +msgid "Export settings to a file." +msgstr "" + +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + +msgid "Arrange Options" +msgstr "" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "" + +msgid "Repetition count" +msgstr "" + +msgid "Repetition count of the whole model." msgstr "" msgid "Ensure on bed" msgstr "" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." +msgstr "" + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + +msgid "Convert Unit" +msgstr "" + +msgid "Convert the units of model." msgstr "" msgid "Orient Options" @@ -12509,12 +15232,80 @@ msgstr "" msgid "Rotation angle around the Z axis in degrees." msgstr "" +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "" msgid "Rotation angle around the Y axis in degrees." msgstr "" +msgid "Scale the model by a float factor." +msgstr "" + +msgid "Load General Settings" +msgstr "" + +msgid "Load process/machine settings from the specified file." +msgstr "" + +msgid "Load Filament Settings" +msgstr "" + +msgid "Load filament settings from the specified file list." +msgstr "" + +msgid "Skip Objects" +msgstr "" + +msgid "Skip some objects in this print." +msgstr "" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "" @@ -12524,34 +15315,116 @@ msgid "" "storage." msgstr "" -msgid "Load custom gcode" +msgid "Output directory" msgstr "" -msgid "Load custom gcode from json" +msgid "Output directory for the exported files." msgstr "" -msgid "Current z-hop" +msgid "Debug level" msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" + +msgid "Enable timelapse for print" +msgstr "" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" + +msgid "Load custom G-code" +msgstr "" + +msgid "Load custom G-code from json." +msgstr "" + +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" +msgstr "" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" msgid "Absolute E position" @@ -12601,7 +15474,8 @@ msgstr "" msgid "Is extruder used?" msgstr "" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" msgid "Has single extruder MM priming" @@ -12616,10 +15490,10 @@ msgstr "" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "" msgid "Total volume" @@ -12669,7 +15543,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -12679,11 +15553,11 @@ msgid "Source filename of the first object, without extension." msgstr "" msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" @@ -12728,6 +15602,9 @@ msgstr "" msgid "Minute" msgstr "" +msgid "Second" +msgstr "" + msgid "Print preset name" msgstr "" @@ -12768,7 +15645,7 @@ msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -12776,7 +15653,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -12803,9 +15680,6 @@ msgstr "" msgid "Detect overhangs for auto-lift" msgstr "" -msgid "Generating support" -msgstr "" - msgid "Checking support necessity" msgstr "" @@ -12824,6 +15698,9 @@ msgid "" "generation." msgstr "" +msgid "Generating support" +msgstr "" + msgid "Optimizing toolpath" msgstr "" @@ -12838,56 +15715,37 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -#, possible-c-format, possible-boost-format -msgid "Support: generate toolpath at layer %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" -msgid "Support: detect overhangs" +msgid "Object name" msgstr "" msgid "Support: generate contact points" msgstr "" -msgid "Support: propagate branches" +msgid "Loading of a model file failed." msgstr "" -msgid "Support: draw polygons" +msgid "Meshing of a model file failed or no valid shape." msgstr "" -msgid "Support: generate toolpath" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: generate polygons at layer %d" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: fix holes at layer %d" -msgstr "" - -#, possible-c-format, possible-boost-format -msgid "Support: propagate branches at layer %d" +msgid "The supplied file couldn't be read because it's empty" msgstr "" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -msgid "Loading of a model file failed." -msgstr "" - -msgid "The supplied file couldn't be read because it's empty" -msgstr "" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -msgid "Canceled" -msgstr "" - msgid "load_obj: failed to parse" msgstr "" @@ -12975,14 +15833,14 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" msgid "The name cannot be empty." msgstr "" #, possible-c-format, possible-boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "" msgid "The name cannot be the same as the system preset name." @@ -12994,6 +15852,14 @@ msgstr "" msgid "create new preset failed." msgstr "" +#, possible-c-format, possible-boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -13014,17 +15880,14 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -msgid "Connecting to printer..." -msgstr "" - -msgid "The failed test result has been dropped." -msgstr "" - -msgid "Flow Dynamics Calibration result has been saved to the printer" +#, possible-c-format, possible-boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" msgstr "" #, possible-c-format, possible-boost-format @@ -13034,22 +15897,38 @@ msgid "" "to override the historical result?" msgstr "" +#, possible-c-format, possible-boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, possible-c-format, possible-boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" +msgid "Connecting to printer..." +msgstr "" + +msgid "The failed test result has been dropped." +msgstr "" + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" + msgid "Internal Error" msgstr "" msgid "Please select at least one filament for calibration" msgstr "" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" msgid "When do you need Flow Dynamics Calibration" @@ -13061,7 +15940,7 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" @@ -13096,12 +15975,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" msgid "" @@ -13166,20 +16045,12 @@ msgid "" "the Name" msgstr "" -msgid "Failed" -msgstr "" - msgid "Please enter the name you want to save to printer." msgstr "" msgid "The name cannot exceed 40 characters." msgstr "" -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" - msgid "Please find the best line on your plate" msgstr "" @@ -13192,9 +16063,6 @@ msgstr "" msgid "Save to Filament Preset" msgstr "" -msgid "Preset" -msgstr "" - msgid "Record Factor" msgstr "" @@ -13229,9 +16097,6 @@ msgstr "" msgid "flow ratio : %s " msgstr "" -msgid "Please choose a block with smoothest top surface" -msgstr "" - msgid "Please choose a block with smoothest top surface." msgstr "" @@ -13258,22 +16123,37 @@ msgstr "" msgid "Printing Parameters" msgstr "" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "" msgid "filament position" msgstr "" -msgid "External Spool" -msgstr "" - msgid "Filament For Calibration" msgstr "" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" msgid "Pattern" @@ -13289,9 +16169,23 @@ msgstr "" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "" @@ -13310,6 +16204,9 @@ msgstr "" msgid "To Volumetric Speed" msgstr "" +msgid "Are you sure you want to cancel this print?" +msgstr "" + msgid "Flow Dynamics Calibration Result" msgstr "" @@ -13335,6 +16232,13 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "" +#, possible-c-format, possible-boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "" @@ -13344,6 +16248,12 @@ msgstr "" msgid "The filament must be selected." msgstr "" +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "" @@ -13377,15 +16287,12 @@ msgstr "" msgid "PA Calibration" msgstr "" -msgid "DDE" -msgstr "" - -msgid "Bowden" -msgstr "" - msgid "Extruder type" msgstr "" +msgid "DDE" +msgstr "" + msgid "PA Tower" msgstr "" @@ -13404,19 +16311,40 @@ msgstr "" msgid "PA step: " msgstr "" +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" + msgid "Print numbers" msgstr "" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" msgid "Temperature calibration" msgstr "" +msgid "Filament type" +msgstr "" + msgid "PLA" msgstr "" @@ -13438,9 +16366,6 @@ msgstr "" msgid "PET-CF" msgstr "" -msgid "Filament type" -msgstr "" - msgid "Start temp: " msgstr "" @@ -13450,11 +16375,14 @@ msgstr "" msgid "Temp step: " msgstr "" +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" @@ -13466,14 +16394,14 @@ msgstr "" msgid "End volumetric speed: " msgstr "" -msgid "step: " +msgid "Wiki Guide: Volumetric Speed Calibration" msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "VFA test" @@ -13485,11 +16413,14 @@ msgstr "" msgid "End speed: " msgstr "" +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "Start retraction length: " @@ -13498,10 +16429,131 @@ msgstr "" msgid "End retraction length: " msgstr "" -msgid "mm/mm" +msgid "Wiki Guide: Retraction Calibration" msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "" msgid "Upload to Printer Host with the following filename:" @@ -13548,18 +16600,35 @@ msgstr "" msgid "Show error message" msgstr "" -msgid "Enqueued" +msgid "Queued" msgstr "" msgid "Uploading" msgstr "" -msgid "Cancelling" +msgid "Canceling" msgstr "" msgid "Error uploading to print host" msgstr "" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + msgid "Unable to perform boolean operation on selected parts" msgstr "" @@ -13611,7 +16680,7 @@ msgstr "" msgid "Export Log" msgstr "" -msgid "Snapmaker_Orca Version:" +msgid "Snapmaker Orca Version:" msgstr "" msgid "System Version:" @@ -13620,13 +16689,13 @@ msgstr "" msgid "DNS Server:" msgstr "" -msgid "Test Snapmaker_Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Snapmaker_Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "" msgid "Test bing.com:" @@ -13690,13 +16759,13 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "" -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "" msgid "" @@ -13707,7 +16776,7 @@ msgstr "" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "" msgid "" @@ -13716,7 +16785,7 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" @@ -13731,8 +16800,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" @@ -13756,21 +16825,27 @@ msgstr "" msgid "Create Type" msgstr "" -msgid "The model is not found, place reselect vendor." -msgstr "" - -msgid "Select Model" +msgid "The model was not found, please reselect vendor." msgstr "" msgid "Select Printer" msgstr "" +msgid "Select Model" +msgstr "" + msgid "Input Custom Model" msgstr "" msgid "Can't find my printer model" msgstr "" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "" @@ -13780,15 +16855,9 @@ msgstr "" msgid "Hot Bed STL" msgstr "" -msgid "Load stl" -msgstr "" - msgid "Hot Bed SVG" msgstr "" -msgid "Load svg" -msgstr "" - msgid "Max Print Height" msgstr "" @@ -13799,16 +16868,16 @@ msgstr "" msgid "Exception in obtaining file size, please import again." msgstr "" -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" msgid "The printer model was not found, please reselect." msgstr "" -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "" -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "" msgid "Printer Preset" @@ -13823,9 +16892,6 @@ msgstr "" msgid "Process Preset Template" msgstr "" -msgid "Back Page 1" -msgstr "" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -13836,9 +16902,6 @@ msgid "" "page. Please check before creating it." msgstr "" -msgid "The custom printer or model is not inputed, place input." -msgstr "" - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -13861,14 +16924,14 @@ msgstr "" msgid "Create process presets failed. As follows:\n" msgstr "" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "" msgid "Current vendor has no models, please reselect." msgstr "" msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" @@ -13888,10 +16951,18 @@ msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "" -msgid "Create Filament Successful" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "" + +msgid "Filament Created Successfully" msgstr "" msgid "Printer Created" @@ -13915,7 +16986,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" @@ -13963,13 +17034,20 @@ msgid "" "creation." msgstr "" +#, possible-c-format, possible-boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" @@ -14018,7 +17096,7 @@ msgid "" "be deleted after exiting the dialog." msgstr "" -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "" msgid "The following presets inherits this preset." @@ -14029,6 +17107,12 @@ msgstr[1] "" msgid "Delete Preset" msgstr "" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" + msgid "Are you sure to delete the selected preset?" msgstr "" @@ -14038,11 +17122,8 @@ msgstr "" msgid "+ Add Preset" msgstr "" -msgid "Delete Filament" -msgstr "" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" @@ -14078,16 +17159,33 @@ msgid "Daily Tips" msgstr "" #, possible-c-format, possible-boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" #, possible-c-format, possible-boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" msgid "Need select printer" @@ -14096,6 +17194,35 @@ msgstr "" msgid "The start, end or step is not valid value." msgstr "" +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -14116,9 +17243,6 @@ msgstr "" msgid "Are you sure to log out?" msgstr "" -msgid "Refresh Printers" -msgstr "" - msgid "View print host webui in Device tab" msgstr "" @@ -14157,22 +17281,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "" msgid "Could not connect to AstroBox" msgstr "" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "" -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "" msgid "Could not connect to Duet" msgstr "" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "" msgid "Wrong password" @@ -14184,7 +17308,7 @@ msgstr "" msgid "Upload not enabled on FlashAir card." msgstr "" -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" msgid "Could not connect to FlashAir" @@ -14195,28 +17319,28 @@ msgid "" "is required." msgstr "" -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "" msgid "Could not connect to MKS" msgstr "" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "" msgid "Could not connect to OctoPrint" msgstr "" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "" -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "" msgid "Could not connect to Prusa SLA" msgstr "" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "" msgid "Could not connect to PrusaLink" @@ -14240,19 +17364,19 @@ msgstr "" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "" msgid "Could not connect to Prusa Connect" msgstr "" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "" msgid "Could not connect to Repetier" msgstr "" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "" #, possible-boost-format @@ -14276,172 +17400,476 @@ msgid "" msgstr "" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "" + +msgid "Sent Time" +msgstr "" + +msgid "There are no tasks to be sent!" +msgstr "" + +msgid "No historical tasks!" +msgstr "" + +msgid "Upgrading" +msgstr "" + +msgid "syncing" +msgstr "" + +msgid "Printing Finish" +msgstr "" + +msgid "Printing Failed" +msgstr "" + +msgid "Printing Pause" +msgstr "" + +msgid "Pending" +msgstr "" + +msgid "Sending" +msgstr "" + +msgid "Sending Finish" +msgstr "" + +msgid "Sending Cancel" +msgstr "" + +msgid "Sending Failed" +msgstr "" + +msgid "Print Success" +msgstr "" + +msgid "Print Failed" +msgstr "" + +msgid "Removed" +msgstr "" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" msgid "Connected to Obico successfully!" @@ -14465,10 +17893,10 @@ msgstr "" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." @@ -14480,22 +17908,110 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" -msgid "User cancelled." +msgid "User canceled." msgstr "" -msgid "Nozzle Bind" +msgid "Head diameter" msgstr "" -msgid "The target machine model has been detected as" +msgid "Max angle" msgstr "" -msgid "Please bind the nozzle information" +msgid "Detection radius" msgstr "" -msgid "Machine Disconnected" +msgid "Remove selected points" msgstr "" -msgid "Connection has been disconnected and recovery attempt failed. Please reconnect." +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr "" + +msgid "Brim Ears" +msgstr "" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -14507,19 +18023,19 @@ msgid "Sandwich mode\nDid you know that you can use sandwich mode (inner-outer-i msgstr "" #: resources/data/hints.ini: [hint:Chamber temperature] -msgid "Chamber temperature\nDid you know that Snapmaker_Orca supports chamber temperature?" +msgid "Chamber temperature\nDid you know that Snapmaker Orca supports chamber temperature?" msgstr "" #: resources/data/hints.ini: [hint:Calibration] -msgid "Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in Snapmaker_Orca." +msgid "Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in Snapmaker Orca." msgstr "" #: resources/data/hints.ini: [hint:Auxiliary fan] -msgid "Auxiliary fan\nDid you know that Snapmaker_Orca supports Auxiliary part cooling fan?" +msgid "Auxiliary fan\nDid you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" #: resources/data/hints.ini: [hint:Air filtration] -msgid "Air filtration/Exhaust Fan\nDid you know that Snapmaker_Orca can support Air filtration/Exhaust Fan?" +msgid "Air filtration/Exhaust Fan\nDid you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" #: resources/data/hints.ini: [hint:G-code window] @@ -14531,7 +18047,7 @@ msgid "Switch workspaces\nYou can switch between Prepare and PreviewTop +msgid "Top" +msgstr "Superior" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "En espera..." @@ -2482,44 +2846,37 @@ msgstr "Extraieu el filament actual" msgid "Push new filament into extruder" msgstr "Empenyeu el nou filament cap a l'extrusora" +msgid "Grab new filament" +msgstr "Agafar filament nou" + msgid "Purge old filament" msgstr "Purgar el filament vell" -msgid "Feed Filament" -msgstr "Carregar Filament" - msgid "Confirm extruded" msgstr "Confirmació d'extrussió" msgid "Check filament location" msgstr "Comprovar la localització del filament" -msgid "Grab new filament" -msgstr "Agafar filament nou" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Trieu una ranura AMS i premeu el botó \"Carregar\" o \"Descarregar\" per " -"carregar o descarregar els filaments automàticament." -msgid "Edit" -msgstr "Editar" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Tots els objectes seleccionats es troben a la placa bloquejada,\n" "No podem fer auto-arranjaments sobre aquests objectes." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "No heu seleccionat objectes arranjables." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Aquesta placa està bloquejada,\n" "No podem fer auto-arranjaments en aquesta placa." @@ -2559,15 +2916,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Tots els objectes seleccionats es troben a la placa bloquejada,\n" "No podem fer auto-orientació sobre aquests objectes." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Aquesta placa està bloquejada,\n" "No podem fer auto-orientació en aquesta placa." @@ -2622,7 +2979,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "La connexió del servei al núvol ha fallat. Torneu-ho a provar." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "No s'ha trobat el fitxer d'impressió. Si us plau, torneu a laminar." msgid "" @@ -2650,7 +3007,7 @@ msgstr "" "La mida del fitxer d'impressió és massa gran. Ajusteu la mida del fitxer i " "torneu-ho a provar." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "No s'ha trobat el fitxer d'impressió, torneu-lo a laminar i imprimiu-lo." @@ -2689,21 +3046,60 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Enviat correctament. Saltarà automàticament a la pàgina següent en %s s" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Cal inserir una targeta SD abans d'imprimir mitjançant LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" -msgstr "Enviant el fitxer gcode a través de LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "Enviant el fitxer gcode a sdcard" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +#, fuzzy +msgid "Sending G-code file over LAN" +msgstr "Enviant el fitxer Codi-G a través de LAN" + +#, fuzzy +msgid "Sending G-code file to SD card" +msgstr "Enviant el fitxer Codi-G a sdcard" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Enviat correctament. Tanca la pàgina actual en %s s" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Cal inserir una targeta SD abans d'enviar a la impressora." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "S'està important l'arxiu SLA" @@ -2743,10 +3139,10 @@ msgstr "Descarregant" msgid "Download failed" msgstr "Descàrrega fallida" -msgid "Cancelled" +msgid "Canceled" msgstr "Cancel·lat" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Instal·lació correcta." msgid "Installing" @@ -2770,8 +3166,8 @@ msgstr "Snapmaker Orca té llicència sota " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, versió 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca està basat en PrusaSlicer i BambuStudio" msgid "Libraries" msgstr "Llibreries" @@ -2787,9 +3183,6 @@ msgstr "" msgid "About %s" msgstr "Sobre %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca es basa en BambuStudio, PrusaSlicer i SuperSlicer." @@ -2818,9 +3211,6 @@ msgstr "Confirmar" msgid "Close" msgstr "Tancar" -msgid "Colour" -msgstr "Color" - msgid "" "Nozzle\n" "Temperature" @@ -2839,11 +3229,6 @@ msgstr "El valor d'entrada ha de ser superior a %1% i inferior a %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"No es permet la configuració de la informació de les ranures AMS mentre " -"s'imprimeix" - msgid "Factors of Flow Dynamics Calibration" msgstr "Factors de Calibratge de les Dinàmiques de Flux" @@ -2856,6 +3241,11 @@ msgstr "Factor K" msgid "Factor N" msgstr "Factor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"No es permet la configuració de la informació de les ranures AMS mentre " +"s'imprimeix" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "No es permet la configuració de la informació de les ranures virtuals mentre " @@ -2875,6 +3265,15 @@ msgstr "Introduïu un valor vàlid (K a %.1f~%.1f)" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Introduïu un valor vàlid (K a %.1f~%.1f, N a %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Un altre color" @@ -2909,15 +3308,9 @@ msgstr "Temperatura del llit" msgid "Max volumetric speed" msgstr "Velocitat volumètrica màxima" -msgid "℃" -msgstr "°C" - msgid "Bed temperature" msgstr "Temperatura del llit" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Iniciar el calibratge" @@ -2959,14 +3352,79 @@ msgstr "Calibratge dinàmic de flux" msgid "Step" msgstr "Pas" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "Ranures AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Extern" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Broquet( nozzle )" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Nota: Només es poden seleccionar les ranures AMS carregades amb el mateix " -"tipus de material." msgid "Enable AMS" msgstr "Habilitar AMS" @@ -2980,13 +3438,10 @@ msgstr "Desactiva AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Imprimeix amb el filament muntat a la part posterior del xassís" -msgid "Current Cabin humidity" -msgstr "Humitat de la cabina" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Si us plau, canvieu el dessecant quan estigui massa humit. És possible que " @@ -2995,7 +3450,7 @@ msgstr "" "absorbir la humitat, les baixes temperatures també alenteixen el procés." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Configureu quina ranura AMS s'ha d'utilitzar per a un filament utilitzat en " "el treball d'impressió" @@ -3015,12 +3470,21 @@ msgstr "No habilitis AMS" msgid "Print using materials mounted on the back of the case" msgstr "Imprimir amb materials muntats a la part posterior de la carcassa" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Imprimir amb filaments en ams" msgid "Print with filaments mounted on the back of the chassis" msgstr "Impressió amb filaments muntats a la part posterior del xassís" +msgid "Auto Refill" +msgstr "Recàrrega automàtica" + +msgid "Left" +msgstr "Esquerra" + +msgid "Right" +msgstr "Dreta" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3028,9 +3492,17 @@ msgstr "" "Quan s'esgoti el material actual, la impressora continuarà imprimint en " "l'ordre següent." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Agrupar" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Actualment, la impressora no admet la recàrrega automàtica." @@ -3041,15 +3513,10 @@ msgstr "" "configuració d'AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Si hi ha dos filaments idèntics en AMS, s'habilitarà la còpia de seguretat " -"del filament AMS. \n" -"( Actualment només admet el subministrament automàtic de consumibles amb la " -"mateixa marca, tipus de material i color )" msgid "DRY" msgstr "SEC" @@ -3071,7 +3538,7 @@ msgstr "" "filament de Bambu Lab. Això triga uns 20 segons." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Nota: si s'insereix un filament nou durant la impressió, l'AMS no llegirà " @@ -3089,8 +3556,8 @@ msgstr "Actualització d'encesa" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "L'AMS llegirà automàticament la informació del filament inserit en iniciar-" "se. Trigarà aproximadament 1 minut. El procés de lectura farà rodar les " @@ -3109,20 +3576,16 @@ msgid "Update remaining capacity" msgstr "Actualitzar la capacitat restant" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"L'AMS estimarà la capacitat restant del filament de Bambu després " -"d'actualitzar la informació del filament. Durant la impressió, la capacitat " -"restant s'actualitzarà automàticament." msgid "AMS filament backup" msgstr "Còpia de seguretat del filament AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS continuarà a una altra bobina amb les mateixes propietats del filament " "automàticament quan s'esgoti el filament actual" @@ -3180,10 +3643,14 @@ msgstr "" "S'ha produït un error. Potser la memòria del sistema no és suficient o és un " "error del programa" -msgid "Please save project and restart the program. " -msgstr "Deseu el projecte i reinicieu el programa. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "S'ha produït un error fatal: \"%1%\"" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Deseu el projecte i reinicieu el programa." + +msgid "Processing G-code from Previous file..." msgstr "Processant el Codi-G del fitxer anterior..." msgid "Slicing complete" @@ -3216,7 +3683,7 @@ msgstr "Executant scripts de postprocessament" msgid "Successfully executed post-processing script" msgstr "Executats scripts de post-processament satisfactòriament" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "S'ha produït un error desconegut durant l'exportació del codi-G." #, boost-format @@ -3269,16 +3736,16 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Fitxer de codi-G exportat a %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Error desconegut en exportar el Codi-G." -#, boost-format +#, fuzzy, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"No s'ha pogut desar el fitxer gcode.\n" +"No s'ha pogut desar el fitxer Codi-G.\n" "Missatge d'error: %1%.\n" "Fitxer origen %2%." @@ -3291,226 +3758,6 @@ msgstr "" "Pujada planificada a `%1%`. Mira Finestra -> Puja a la cua del gestor " "d'impressió" -msgid "Device" -msgstr "Dispositiu" - -msgid "Task Sending" -msgstr "Enviant Tasca" - -msgid "Task Sent" -msgstr "Tasca enviada" - -msgid "Edit multiple printers" -msgstr "Editar diverses impressores" - -msgid "Select connected printers (0/6)" -msgstr "Seleccionar impressores connectades (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Seleccionar Impressores Connectades (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "El nombre màxim d'impressores que es poden seleccionar és de %d" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "Sense tasca" - -msgid "View" -msgstr "Vista" - -msgid "N/A" -msgstr "N/D" - -msgid "Edit Printers" -msgstr "Editar Impressores" - -msgid "Device Name" -msgstr "Nom del dispositiu" - -msgid "Task Name" -msgstr "Nom de la tasca" - -msgid "Device Status" -msgstr "Estat del dispositiu" - -msgid "Actions" -msgstr "Accions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Seleccioneu aquí els dispositius que voleu gestionar (fins a 6 dispositius)" - -msgid "Add" -msgstr "Afegir" - -msgid "Idle" -msgstr "Inactiu" - -msgid "Printing" -msgstr "Imprimint" - -msgid "Upgrading" -msgstr "Actualitzant" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "sincronitzant" - -msgid "Printing Finish" -msgstr "Finalitzar Impressió" - -msgid "Printing Failed" -msgstr "Impressió Fallida" - -msgid "Printing Pause" -msgstr "Pausar Impressió" - -msgid "Prepare" -msgstr "Preparació" - -msgid "Slicing" -msgstr "Laminant" - -msgid "Pending" -msgstr "Pendent" - -msgid "Sending" -msgstr "Enviant" - -msgid "Sending Finish" -msgstr "Finalitzar Enviament" - -msgid "Sending Cancel" -msgstr "Cancel·lar Enviament" - -msgid "Sending Failed" -msgstr "Enviament Fallit" - -msgid "Print Success" -msgstr "Impressió Exitosa" - -msgid "Print Failed" -msgstr "Impressió Fallida" - -msgid "Removed" -msgstr "Eliminat" - -msgid "Resume" -msgstr "Reprendre" - -msgid "Stop" -msgstr "Aturar" - -msgid "Task Status" -msgstr "Estat de la tasca" - -msgid "Sent Time" -msgstr "Temps d'Enviament" - -msgid "There are no tasks to be sent!" -msgstr "No hi ha tasques per enviar!" - -msgid "No historical tasks!" -msgstr "Sense tasques històriques!" - -msgid "Loading..." -msgstr "Carregant…" - -msgid "No AMS" -msgstr "Sense AMS" - -msgid "Send to Multi-device" -msgstr "Enviar a multidispositiu" - -msgid "Preparing print job" -msgstr "Preparant el treball d'impressió" - -msgid "Abnormal print file data. Please slice again" -msgstr "Dades anormals del fitxer d'impressió. Si us plau, torneu a laminar" - -msgid "There is no device available to send printing." -msgstr "No hi ha cap dispositiu disponible per enviar la impressió." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "El nombre d'impressores en ús simultàniament no pot ser igual a 0." - -msgid "Use External Spool" -msgstr "Utilitzar la Bobina Externa" - -msgid "Use AMS" -msgstr "Utilitzar AMS" - -msgid "Select Printers" -msgstr "Seleccionar Impressores" - -msgid "Ams Status" -msgstr "Estat AMS" - -msgid "Printing Options" -msgstr "Opcions d'Impressió" - -msgid "Bed Leveling" -msgstr "Anivellament del llit" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "Calibratge de Dinàmiques de Flux" - -msgid "Send Options" -msgstr "Opcions d'Enviament" - -msgid "Send to" -msgstr "Enviar a" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"impressores al mateix temps. (Depèn de quants dispositius es puguin escalfar " -"alhora.)" - -msgid "Wait" -msgstr "Espereu" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minut cada lot. (Depèn del temps que es trigui a completar la calefacció.)" - -msgid "Send" -msgstr "Enviar" - -msgid "Name is invalid;" -msgstr "El nom no és vàlid;" - -msgid "illegal characters:" -msgstr "caràcters no permesos:" - -msgid "illegal suffix:" -msgstr "sufix no permès:" - -msgid "The name is not allowed to be empty." -msgstr "No es permet que el nom estigui buit." - -msgid "The name is not allowed to start with space character." -msgstr "No es permet que el nom comenci amb caràcter d'espai." - -msgid "The name is not allowed to end with space character." -msgstr "No es permet que el nom acabi amb caràcter d'espai." - -msgid "The name length exceeds the limit." -msgstr "La longitud del nom supera el límit." - msgid "Origin" msgstr "Origen" @@ -3583,12 +3830,13 @@ msgstr "Escolliu un fitxer STL per importar el model de la placa d'impressió:" msgid "Bed Shape" msgstr "Forma de la placa d'impressió" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"La temperatura mínima recomanada és inferior a 190 graus o la màxima " -"recomanada és superior a 300 graus.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3612,23 +3860,23 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "La temperatura recomanada del broquet d'aquest tipus de filament és de [%d, " -"%d] graus centígrads" +"%d] graus Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocitat volumètrica màxima massa petita.\n" "Restableix a 0.5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "La temperatura actual de la cambra és superior a la temperatura segura del " @@ -3637,14 +3885,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Alçada de capa massa petita.\n" "Restableix a 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Espaiat de planxa massa petit.\n" "Restableix a 0.1" @@ -3690,18 +3938,18 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"El perímetre addicional alternat no funciona correctament amb 'Assegurar el " -"gruix de la carcassa vertical' establert a Tots. " +"La paret addicional alternativa no funciona bé quan assegurar el gruix de la " +"closca vertical està establert a Tot." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" -"Canviar aquesta configuració automàticament? \n" +"Canviar aquesta configuració automàticament?\n" "Sí - Cambiar 'Assegurar el gruix de la carcassa vertical' a 'Moderat' " "activar 'perímetre addicional alternat'\n" "No - No utilitzar perímetre addicional alternat" @@ -3744,13 +3992,6 @@ msgstr "" "SÍ - Mantenir la Torre de Purga\n" "NO - Mantenir l'alçada de la capa de suport independent" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Mentre s'imprimeix per Objecte, l'extrusora pot xocar amb la faldilla.\n" -"Per tant, restabliu la capa de faldilla a 1 per evitar-ho." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." @@ -3758,34 +3999,53 @@ msgstr "" "seam_slope_start_height ha de ser més petit que layer_height.\n" "Restablert a 0." +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"El mode espiral només funciona quan els bucles de perímetre és 1, el suport " -"està desactivat, les capes superiors de l'intèrpret d'ordres són 0, la " -"densitat de farciment escassa és 0 i el tipus timelapse és tradicional." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Però les màquines amb estructura I3 no generaran vídeos timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Canviar aquesta configuració automàticament? \n" +"Canviar aquesta configuració automàticament?\n" "Sí: canviar aquesta configuració i activar el mode d'espiral automàticament\n" "No - Renunciar a utilitzar el mode espiral aquesta vegada" +msgid "Printing" +msgstr "Imprimint" + msgid "Auto bed leveling" msgstr "Anivellament de llit automàtic" msgid "Heatbed preheating" msgstr "Preescalfament de llits calefactables" -msgid "Sweeping XY mech mode" -msgstr "Escombrat en XY en mode mecànic" +msgid "Vibration compensation" +msgstr "Compensació de vibracions" msgid "Changing filament" msgstr "Canviant filament" @@ -3793,14 +4053,14 @@ msgstr "Canviant filament" msgid "M400 pause" msgstr "Pausa M400" -msgid "Paused due to filament runout" -msgstr "Pausa a causa de l'esgotament del filament" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Escalfant broquet" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Calibrant extrusió" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Escanejant superfície del llit" @@ -3823,81 +4083,138 @@ msgstr "Netejant punta del broquet" msgid "Checking extruder temperature" msgstr "Comprovant la temperatura de l'extrusora" -msgid "Printing was paused by the user" -msgstr "L'usuari ha posat en pausa la impressió" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pausa en caure la coberta frontal" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Calibrant el micro lidar" -msgid "Calibrating extrusion flow" -msgstr "Calibrant el flux d'extrusió" - -msgid "Paused due to nozzle temperature malfunction" -msgstr "En pausa a causa d'un mal funcionament de la temperatura del broquet" - -msgid "Paused due to heat bed temperature malfunction" +msgid "Calibrating flow ratio" +msgstr "" + +msgid "Pause (nozzle temperature malfunction)" +msgstr "" + +msgid "Pause (heatbed temperature malfunction)" msgstr "" -"En pausa a causa d'un mal funcionament de la temperatura del llit de " -"calefactat" msgid "Filament unloading" msgstr "Descàrrega de filament" -msgid "Skip step pause" -msgstr "Omet la pausa del pas" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Càrrega de filament" -msgid "Motor noise calibration" -msgstr "Calibratge de soroll del motor" +msgid "Motor noise cancellation" +msgstr "Cancel·lació de soroll del motor" -msgid "Paused due to AMS lost" -msgstr "En pausa a causa de la pèrdua de l'AMS" - -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (AMS offline)" msgstr "" -"Pausat a causa de la baixa velocitat del ventilador de dissipació de calor" -msgid "Paused due to chamber temperature control error" -msgstr "En pausa a causa d'un error de control de temperatura de la cambra" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" + +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Refredant cambra" -msgid "Paused by the Gcode inserted by user" -msgstr "Pausat pel Gcode inserit per l'usuari" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Avaluació soroll del motor" -msgid "Nozzle filament covered detected pause" -msgstr "Pausa per detecció de broquet cobert de filament" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pausa d'error de tallador" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Pausa d'error de la primera capa" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pausa d'obstrucció del broquet" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Desconegut" -msgid "Fatal" -msgstr "Fatal" - -msgid "Serious" -msgstr "Seriós" - -msgid "Common" -msgstr "Comú" - msgid "Update successful." msgstr "L'actualització s'ha realitzat correctament." @@ -3910,34 +4227,57 @@ msgstr "La verificació ha fallat." msgid "Update failed." msgstr "S'ha produït un error en l'actualització." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"La temperatura actual de la cambra o la temperatura de la cambra objectiu " -"supera els 45 °C. Per evitar l'obstrucció de l'extrusora, no es permet " -"carregar filaments de baixa temperatura ( PLA / PETG / TPU )." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"El filament de baixa temperatura ( PLA/PETG/TPU ) está carregat a " -"l'extrusor. Per evitar l'obstrucció de l'extrusora, no es permet establir la " -"temperatura de la cambra per sobre dels 45 °C." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Quan establiu la temperatura de la cambra per sota dels 40 °C, el control de " "temperatura de la cambra no s'activarà. I la temperatura de la cambra " "objectiu s'establirà automàticament a 0 °C." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "No s'ha pogut començar a imprimir" msgid "" @@ -3951,31 +4291,77 @@ msgstr "El paràmetre de cabal actual no és vàlid" msgid "Selected diameter and machine diameter do not match" msgstr "El diàmetre seleccionat i el diàmetre de la màquina no coincideixen" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "No s'ha pogut generar el gcode cali" msgid "Calibration error" msgstr "Error de calibratge" -msgid "TPU is not supported by AMS." -msgstr "El TPU no és compatible amb AMS." +msgid "Resume Printing" +msgstr "Reprendre Impressió" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF no és compatible amb AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"El PVA humit es tornarà flexible i quedarà atrapat dins d'AMS, tingueu cura " -"d'assecar-lo abans d'utilitzar-lo." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Deixar d'imprimir" + +msgid "Check Assistant" +msgstr "Assistent de comprovació" + +msgid "Filament Extruded, Continue" +msgstr "Filament Extruït, Continuar" + +msgid "Not Extruded Yet, Retry" +msgstr "Encara no s'ha Extruït, Tornar a Intentar-ho" + +msgid "Finished, Continue" +msgstr "Finalitzat, Continuar" + +msgid "Load Filament" +msgstr "Carregar Filament" + +msgid "Filament Loaded, Resume" +msgstr "Filament carregat, reprendre" + +msgid "View Liveview" +msgstr "Veure Liveview" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Fet" + +msgid "Retry" +msgstr "Reintentar" + +msgid "Resume" +msgstr "Reprendre" + +msgid "Unknown error." msgstr "" -"Els filaments CF / GF són durs i trencadissos, És fàcil trencar-se o quedar-" -"se atrapat en AMS, si us plau, utilitzeu amb precaució." msgid "default" msgstr "per defecte" @@ -3988,7 +4374,7 @@ msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" "Placeholders integrats (feu doble clic a l'element per afegir-lo al codi-G)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Cercar placeholders( Variables ) de codi-G" msgid "Add selected placeholder to G-code" @@ -4047,7 +4433,7 @@ msgid "parameter name" msgstr "nom del paràmetre" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s no pot ser un percentatge" #, c-format, boost-format @@ -4071,7 +4457,7 @@ msgid "" "NO for %s %s." msgstr "" "És %s%% or %s %s?\n" -"SÍ per %s%%. \n" +"SÍ per %s%%.\n" "NO per %s %s." #, boost-format @@ -4088,10 +4474,27 @@ msgstr "El valor introduït és fora de rang" msgid "Some extension in the input is invalid" msgstr "Alguna extensió de l'entrada no és vàlida" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Format no vàlid. Format vectorial esperat: \"%1%\"" +msgid "N/A" +msgstr "N/D" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Alçada de capa" @@ -4101,9 +4504,6 @@ msgstr "Amplada de la línia" msgid "Fan Speed" msgstr "Velocitat del ventilador" -msgid "Temperature" -msgstr "Temperatura" - msgid "Flow" msgstr "Fluxe" @@ -4137,7 +4537,7 @@ msgstr "Ventilador: " msgid "Temperature: " msgstr "Temperatura: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Carregant codis G" msgid "Generating geometry vertex data" @@ -4170,6 +4570,72 @@ msgstr "Temps total" msgid "Total cost" msgstr "Cost total" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Consells:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Consells" + msgid "up to" msgstr "fins a" @@ -4179,17 +4645,11 @@ msgstr "sobre" msgid "from" msgstr "des de" -msgid "Color Scheme" -msgstr "Esquema de color" - msgid "Time" msgstr "Temps" -msgid "Percent" -msgstr "Percentatge" - -msgid "Used filament" -msgstr "Filament usat" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Alçada de capa ( mm )" @@ -4236,12 +4696,12 @@ msgstr "recorregut" msgid "Extruder" msgstr "Extrusor" -msgid "Filament change times" -msgstr "Canvis de filament" - msgid "Cost" msgstr "Cost" +msgid "Filament change times" +msgstr "Canvis de filament" + msgid "Color change" msgstr "Canvi de color" @@ -4251,10 +4711,7 @@ msgstr "Imprimir" msgid "Printer" msgstr "Impressora" -msgid "Custom g-code" -msgstr "Codi-G personalitzat" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Canvi d'eina" msgid "Time Estimation" @@ -4281,6 +4738,19 @@ msgstr "Canviar al mode silenciós" msgid "Switch to normal mode" msgstr "Canviar al mode normal" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Alçada de capa variable" @@ -4299,27 +4769,15 @@ msgstr "Radi" msgid "Keep min" msgstr "Mantenir mínim" -msgid "Left mouse button:" -msgstr "Botó esquerre del ratolí:" - msgid "Add detail" msgstr "Afegir detall" -msgid "Right mouse button:" -msgstr "Botó dret del ratolí:" - msgid "Remove detail" msgstr "Retirar detall" -msgid "Shift + Left mouse button:" -msgstr "Maj + botó esquerre del ratolí:" - msgid "Reset to base" msgstr "Tornar a la base" -msgid "Shift + Right mouse button:" -msgstr "Maj + botó dret del ratolí:" - msgid "Smoothing" msgstr "Suavitzat" @@ -4332,6 +4790,55 @@ msgstr "Incrementar/reduir àrea edició" msgid "Sequence" msgstr "Seqüència" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Reflectir objecte" @@ -4377,11 +4884,25 @@ msgstr "Evitar la regió de calibratge d'extrusió" msgid "Align to Y axis" msgstr "Alinear a l'eix Y" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Afegir" + msgid "Add plate" msgstr "Afegir placa" -msgid "Auto orient" -msgstr "Auto-orientació" +msgid "Auto orient all/selected objects" +msgstr "Auto-orientació tots/seleccionats objectes" + +msgid "Auto orient all objects on current plate" +msgstr "Auto-orientació tots els objectes de la placa actual" msgid "Arrange all objects" msgstr "Ordenar tots els objectes" @@ -4401,11 +4922,29 @@ msgstr "Vista de muntatge" msgid "Select Plate" msgstr "Seleccioneu Placar" +msgid "Slicing" +msgstr "Laminant" + +msgid "Slice all" +msgstr "Laminar-ho tot" + +msgid "Failed" +msgstr "Ha fallat" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "Tornar a Agrupar" -msgid "return" -msgstr "tornar" +msgid "Return" +msgstr "Tornar" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Barra d'eines de pintura" @@ -4419,6 +4958,9 @@ msgstr "Vista de secció" msgid "Assemble Control" msgstr "Control d'ensamblatge" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Volum total:" @@ -4431,35 +4973,73 @@ msgstr "Volum:" msgid "Size:" msgstr "Mida:" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"S'han trobat conflictes de rutes gcode a la capa %d, z = %.2lf mm. Si us " +"S'han trobat conflictes de rutes gcode a la capa %d, Z = %.2lfmm. Si us " "plau, separeu els objectes conflictius més lluny ( %s <-> %s )." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Un objecte està col·locat sobre el límit de la placa." msgid "A G-code path goes beyond the max print height." msgstr "Una trajectòria de Codi-G va més enllà de l'alçada màxima d'impressió." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Una trajectòria de Codi-G va més enllà del límit de placa." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Només és visible l'objecte que s'està editant." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Un objecte està col·locat sobre el límit de la placa o supera el límit " -"d'alçada.\n" -"Resoleu el problema movent-lo totalment sobre o fora de la placa i " -"confirmant que l'alçada es troba dins del volum de construcció." msgid "Calibration step selection" msgstr "Selecció del pas de calibratge" @@ -4470,11 +5050,8 @@ msgstr "Calibratge micro lidar" msgid "Bed leveling" msgstr "Anivellament del llit" -msgid "Vibration compensation" -msgstr "Compensació de vibracions" - -msgid "Motor noise cancellation" -msgstr "Cancel·lació de soroll del motor" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Programa de calibratge" @@ -4527,24 +5104,21 @@ msgstr "Font de la càmera personalitzada" msgid "Show \"Live Video\" guide page." msgstr "Mostra la pàgina de guia \"Vídeo en directe\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Connectar Impressora( LAN )" msgid "Please input the printer access code:" msgstr "Introduïu el codi d'accés a la impressora:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"El podeu trobar a \"Configuració > Xarxa > Codi de connexió\"\n" -"a la impressora, tal com es mostra a la figura:" msgid "Invalid input." msgstr "Entrada no vàlida." @@ -4564,9 +5138,15 @@ msgstr "Tancant l'aplicació mentre s'han modificat alguns perfils." msgid "Logging" msgstr "Registrant" +msgid "Prepare" +msgstr "Preparació" + msgid "Preview" msgstr "Previsualització" +msgid "Device" +msgstr "Dispositiu" + msgid "Multi-device" msgstr "Multidispositiu" @@ -4588,12 +5168,12 @@ msgstr "Laminar placa" msgid "Print plate" msgstr "Imprimir placa d'impressió" -msgid "Slice all" -msgstr "Laminar-ho tot" - msgid "Export G-code file" msgstr "Exportar el fitxer del Codi-G" +msgid "Send" +msgstr "Enviar" + msgid "Export plate sliced file" msgstr "Exportar fitxer de la placa laminada" @@ -4606,6 +5186,9 @@ msgstr "Imprimeix-ho tot" msgid "Send all" msgstr "Envia-ho tot" +msgid "Send to Multi-device" +msgstr "Enviar a multidispositiu" + msgid "Keyboard Shortcuts" msgstr "Dreceres de teclat" @@ -4640,10 +5223,6 @@ msgstr "Descarregar models" msgid "Default View" msgstr "Vista per omissió" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Superior" - msgid "Top View" msgstr "Vista superior" @@ -4666,15 +5245,9 @@ msgstr "Al darrere" msgid "Rear View" msgstr "Vista del darrere" -msgid "Left" -msgstr "Esquerra" - msgid "Left View" msgstr "Vista esquerra" -msgid "Right" -msgstr "Dreta" - msgid "Right View" msgstr "Vista dreta" @@ -4690,8 +5263,8 @@ msgstr "Començar un nou projecte" msgid "Open a project file" msgstr "Obrir un fitxer de projecte" -msgid "Recent projects" -msgstr "Projectes recents" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Desar projecte" @@ -4702,9 +5275,6 @@ msgstr "Desar el projecte actual a un fitxer" msgid "Save Project as" msgstr "Desa el projecte com a" -msgid "Shift+" -msgstr "Màj+" - msgid "Save current project as" msgstr "Desar el projecte actual com" @@ -4738,8 +5308,8 @@ msgstr "Exportar tots els objectes com a diferents STLs" msgid "Export Generic 3MF" msgstr "Exportar 3MF Genèric" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exportar el fitxer 3mf sense utilitzar algunes extensions" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exportar el fitxer 3MF sense utilitzar algunes extensions" msgid "Export current sliced file" msgstr "Exportar el fitxer laminat actual" @@ -4753,6 +5323,9 @@ msgstr "Exportar el Codi-G" msgid "Export current plate as G-code" msgstr "Exportar placa actual com a Codi-G" +msgid "Export toolpaths as OBJ" +msgstr "Exportar trajectòries d'eines com a OBJ" + msgid "Export Preset Bundle" msgstr "Exportar el Paquet de Perfil" @@ -4804,6 +5377,12 @@ msgstr "Clonar el selecciona" msgid "Clone copies of selections" msgstr "Clonar còpies de seleccions" +msgid "Duplicate Current Plate" +msgstr "Duplicat de la Placa Actual" + +msgid "Duplicate the current plate" +msgstr "Duplicar la placa actual" + msgid "Select all" msgstr "Selecciona-ho tot" @@ -4822,16 +5401,26 @@ msgstr "Utilitzar la vista de perspectiva" msgid "Use Orthogonal View" msgstr "Utilitzar la vista ortogonal" +msgid "Auto Perspective" +msgstr "Perspectiva automàtica" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Canviar automàticament entre ortogràfic i perspectiva en canviar de vistes " +"superior/inferior/lateral" + msgid "Show &G-code Window" msgstr "Mostra Finestra %Codi-G" -msgid "Show g-code window in Previce scene" -msgstr "Mostra la finestra de Codi-g a l'escena prèvia" +msgid "Show G-code window in Preview scene." +msgstr "Mostra la finestra de Codi-G a l'escena prèvia" msgid "Show 3D Navigator" msgstr "Mostrar el navegador 3D" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "Mostrar el navegador 3D en Preparació i Previsualització" msgid "Reset Window Layout" @@ -4843,18 +5432,27 @@ msgstr "Restableix el disseny predeterminat de la finestra" msgid "Show &Labels" msgstr "Mostrar &Etiquetes" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Mostrar etiquetes d'objecte en escena 3D" msgid "Show &Overhang" msgstr "Mostrar %Voladís" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "Mostra el ressaltat del voladís de l'objecte a l'escena 3D" +msgid "Show Selected Outline (beta)" +msgstr "Mostra l'esquema seleccionat (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Mostrar el contorn al voltant de l'objecte seleccionat a l'escena 3D" + msgid "Preferences" msgstr "Preferències" +msgid "View" +msgstr "Vista" + msgid "Help" msgstr "Ajuda" @@ -4873,6 +5471,18 @@ msgstr "Pas 2" msgid "Flow rate test - Pass 2" msgstr "Test de Flux - Pas 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (Recomanat)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Calibració del flux de material YOLO d'Orca, pas de 0,01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (versió perfeccionista)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Calibració del flux de material YOLO d'Orca, pas de 0,005" + msgid "Flow rate" msgstr "Ratio de Flux" @@ -4882,27 +5492,33 @@ msgstr "Avanç de Pressió Lineal( Pressure advance )" msgid "Retraction test" msgstr "Prova de retracció" -msgid "Orca Tolerance Test" -msgstr "Prova de tolerància d'Orca" - msgid "Max flowrate" msgstr "Cabal màxim" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Més..." - msgid "Tutorial" msgstr "Tutorial" msgid "Calibration help" msgstr "Ajuda per calibratge" -msgid "More calibrations" -msgstr "Més calibratges" - msgid "&Open G-code" msgstr "&Obrir Codi-G" @@ -4918,9 +5534,6 @@ msgstr "Carregar la placa des del disc" msgid "Export &Toolpaths as OBJ" msgstr "Exportar &Trajectòries d'eina com OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Exportar trajectòries d'eines com a OBJ" - msgid "Open &Slicer" msgstr "Obrir &Slicer" @@ -4944,16 +5557,19 @@ msgid "&Help" msgstr "&Ajuda" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Existeix un fitxer amb el mateix nom: %s, el voleu sobreescriure." +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Existeix un fitxer amb el mateix nom: %s, el voleu sobreescriure?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Hi ha una configuració amb el mateix nom: %s, la voleu sobreescriure." +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Hi ha una configuració amb el mateix nom: %s, la voleu sobreescriure?" msgid "Overwrite file" msgstr "Sobreescriure el fitxer" +msgid "Overwrite config" +msgstr "Sobreescriu la configuració" + msgid "Yes to All" msgstr "Sí a Tot" @@ -5012,13 +5628,13 @@ msgid "Filament Settings" msgstr "Configuració del Filament" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Vols sincronitzar les teves dades personals des de Bambu Cloud? \n" +"Vols sincronitzar les teves dades personals des de Bambu Cloud?\n" "Conté la següent informació:\n" "1. Els perfils de Procés\n" "2. Els perfils de Filament\n" @@ -5052,7 +5668,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "La càmera de la impressora funciona malament." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Ha ocorregut un problema. Actualitzeu el firmware de la impressora i torneu-" "ho a provar." @@ -5074,7 +5690,7 @@ msgstr "" "S'ha produït un error de connexió. Comproveu la xarxa i torneu-ho a provar" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Comproveu la xarxa i torneu-ho a provar. Podeu reiniciar o actualitzar la " @@ -5083,8 +5699,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "La impressora ha tancat la sessió i no es pot connectar." -msgid "Stopped." -msgstr "Aturat." +msgid "Video Stopped." +msgstr "Vídeo aturat." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "" @@ -5123,6 +5739,9 @@ msgstr "Informació" msgid "Playing..." msgstr "Reproduint..." +msgid "Loading..." +msgstr "Carregant…" + msgid "Year" msgstr "Any" @@ -5141,6 +5760,9 @@ msgstr "Agrupar els fitxers per mes, primer els recents." msgid "Show all files, recent first." msgstr "Mostrar tots els fitxers, primers els recents." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Canvieu als fitxers timelapse." @@ -5150,8 +5772,9 @@ msgstr "Vídeo" msgid "Switch to video files." msgstr "Canviar a fitxers de vídeo." -msgid "Switch to 3mf model files." -msgstr "Canviar a fitxers model 3mf." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Canviar a fitxers model 3MF." msgid "Delete selected files from printer." msgstr "Suprimir els fitxers seleccionats de la impressora." @@ -5177,10 +5800,6 @@ msgstr "Tornar a carregar la llista de fitxers des de la impressora." msgid "No printers." msgstr "No hi ha cap Impressora." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Connexió fallida [%d]!" - msgid "Loading file list..." msgstr "Carregant llista de fitxers..." @@ -5190,33 +5809,16 @@ msgstr "No hi ha fitxers" msgid "Load failed" msgstr "Càrrega fallida" -msgid "Initialize failed (Device connection not ready)!" -msgstr "" -"Inicialització fallida ( la connexió del Dispositiu no està preparada )!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"L'exploració de fitxers a la targeta SD no és compatible amb el firmware " -"actual. Actualitzeu el firmware de la impressora." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"Inicialització fallida (emmagatzematge no disponible, inseriu la targeta " -"SD.)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Ha fallat la connexió LAN (no s'ha pogut visualitzar sdcard)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -"L'exploració de fitxers a la targeta SD no és compatible amb el mode només " -"LAN." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inicialització fallida ( %s )!" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5239,7 +5841,7 @@ msgstr "Vols esborrar el fitxer '%s' de la impressora?" msgid "Delete file" msgstr "Suprimir el fitxer" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Obtenint infomacions del model ..." msgid "Failed to fetch model information from printer." @@ -5249,8 +5851,8 @@ msgid "Failed to parse model information." msgstr "No s'ha pogut analitzar la informació del model." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "El fitxer .gcode.3mf no conté dades de Codi-G. Lamineu-lo amb Snapmaker Orca i " "exporteu un nou fitxer .gcode.3mf." @@ -5283,6 +5885,9 @@ msgstr "Descàrrega finalitzada" msgid "Downloading %d%%..." msgstr "Descarregant %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5290,6 +5895,9 @@ msgstr "" "Tornant a connectar la impressora. L'operació no es pot completar " "immediatament. Torneu-ho a provar més tard." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "El fitxer no existeix." @@ -5299,13 +5907,47 @@ msgstr "Error de checksum de fitxer. Si us plau, torna-ho a intentar." msgid "Not supported on the current printer version." msgstr "No és compatible amb la versió actual de la impressora." -msgid "Storage unavailable, insert SD card." -msgstr "Emmagatzematge no disponible, inseriu la targeta SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Codi d'error: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Velocitat:" @@ -5345,11 +5987,84 @@ msgstr "Invertir eix de Capcineig" msgid "Invert Roll axis" msgstr "Invertir eix de Balanceig" +msgid "(LAN)" +msgstr "( LAN )" + +msgid "Search" +msgstr "Cercar" + +msgid "My Device" +msgstr "El Meu Dispositiu" + +msgid "Other Device" +msgstr "Un Altre Dispositiu" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Introduir el codi d'accés" + +msgid "Can't find my devices?" +msgstr "No puc trobar els meus dispositius?" + +msgid "Log out successful." +msgstr "Tancament de sessió correcte." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Ocupat" + +msgid "Modifying the device name" +msgstr "Modificant el nom del dispositiu" + +msgid "Name is invalid;" +msgstr "El nom no és vàlid;" + +msgid "illegal characters:" +msgstr "caràcters no permesos:" + +msgid "illegal suffix:" +msgstr "sufix no permès:" + +msgid "The name is not allowed to be empty." +msgstr "No es permet que el nom estigui buit." + +msgid "The name is not allowed to start with space character." +msgstr "No es permet que el nom comenci amb caràcter d'espai." + +msgid "The name is not allowed to end with space character." +msgstr "No es permet que el nom acabi amb caràcter d'espai." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Enllaçar amb codi PIN" + +msgid "Bind with Access Code" +msgstr "Enllaçar amb el codi d'accés" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Progrés de la impressió" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Aturar" msgid "Layer: N/A" msgstr "Capa: N/A" @@ -5380,8 +6095,8 @@ msgstr "Taxa" msgid "Camera" msgstr "Càmera" -msgid "SD Card" -msgstr "Targeta SD" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Configuració de la càmera" @@ -5398,35 +6113,41 @@ msgstr "Peces d'Impressora" msgid "Print Options" msgstr "Opcions d'impressió" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Llum" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Cambra" - msgid "Bed" msgstr "Llit" msgid "Debug Info" msgstr "Informació de depuració" -msgid "No SD Card" -msgstr "Sense targeta SD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "Targeta SD anormal" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Cancel·la la impressió" -msgid "Are you sure you want to cancel this print?" -msgstr "Estàs segur que vols cancel·lar aquesta impressió?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "La impressora està ocupada en altres treballs d'impressió." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Descarregant..." @@ -5447,17 +6168,15 @@ msgid "Layer: %d/%d" msgstr "Capa: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Escalfeu el broquet per sobre dels 170 graus abans de carregar o descarregar " -"el filament." +"Escalfeu el broquet per sobre dels 170 °C abans de carregar o descarregar el " +"filament." -msgid "Still unload" -msgstr "Encara descarregat" - -msgid "Still load" -msgstr "Encara carregat" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Seleccioneu una ranura AMS abans del calibratge" @@ -5484,8 +6203,19 @@ msgstr "Esportiu" msgid "Ludicrous" msgstr "Insensat" -msgid "Can't start this without SD card." -msgstr "No es pot iniciar sense la targeta SD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Valora el Perfil d'Impressió" @@ -5508,14 +6238,11 @@ msgstr "Enviar" msgid "Please click on the star first." msgstr "Feu clic les estrelles, primer." -msgid "InFo" -msgstr "Informació" - msgid "Get oss config failed." msgstr "No s'ha pogut obtenir la configuració del Sistema Operatiu." -msgid "Upload Pictrues" -msgstr "Pujar Imatges" +msgid "Upload Pictures" +msgstr "Puja Imatges" msgid "Number of images successfully uploaded" msgstr "Nombre d'imatges carregades correctament" @@ -5529,7 +6256,7 @@ msgstr " error a la càrrega de configuració\n" msgid " No corresponding storage bucket\n" msgstr " No hi ha cub d'emmagatzematge corresponent\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " no es pot obrir\n" msgid "" @@ -5555,7 +6282,7 @@ msgid "obtaining instance_id failed\n" msgstr "error en obtenir instance_id \n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5569,7 +6296,7 @@ msgstr "missatge d'error: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5577,7 +6304,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Algunes de les vostres imatges no s'han pogut penjar. Voleu redirigir a la " "pàgina web per valorar-la?" @@ -5587,7 +6314,7 @@ msgstr "Podeu seleccionar fins a 16 imatges." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Es requereix com a mínim un registre d'impressió correcte d'aquest perfil " "d'impressió \n" @@ -5596,12 +6323,22 @@ msgstr "" msgid "Status" msgstr "Estat" +msgctxt "Firmware" msgid "Update" -msgstr "Actualitzar" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "No tornis a mostrar" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s error" @@ -5629,14 +6366,14 @@ msgstr "%s informació" msgid "Skip" msgstr "Omet" -msgid "Newer 3mf version" -msgstr "Nova versió 3mf" +msgid "Newer 3MF version" +msgstr "Nova versió 3MF" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" -"La versió d'arxiu 3mf està en Beta i és més recent que la versió actual " +"La versió d'arxiu 3MF està en Beta i és més recent que la versió actual " "d'Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" @@ -5645,14 +6382,14 @@ msgstr "Si voleu provar Snapmaker Orca Beta, podeu fer clic a" msgid "Download Beta Version" msgstr "Descarregar Versió Beta" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -"La versió del fitxer 3mf és més nova que la versió actual de l'Snapmaker Orca." +"La versió del fitxer 3MF és més nova que la versió actual de l'Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" "Actualitzar el vostre Snapmaker Orca podria habilitar totes les funcionalitats " -"al fitxer 3mf." +"al fitxer 3MF." msgid "Current Version: " msgstr "Versió actual: " @@ -5660,9 +6397,36 @@ msgstr "Versió actual: " msgid "Latest Version: " msgstr "Última Versió: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "No per ara" +msgid "Server Exception" +msgstr "Excepció del servidor" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"El servidor no pot respondre. Feu clic a l'enllaç següent per comprovar " +"l'estat del servidor." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Si el servidor es troba en un estat d'error, podeu utilitzar temporalment la " +"impressió fora de línia o la impressió en xarxa local." + +msgid "How to use LAN only mode" +msgstr "Com utilitzar el mode només LAN" + +msgid "Don't show this dialog again" +msgstr "No tornis a mostrar aquest diàleg" + msgid "3D Mouse disconnected." msgstr "S'ha desconnectat el ratolí 3D." @@ -5725,9 +6489,15 @@ msgstr[1] "%1$d Els objectes tenen pintura en color." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d L'objecte s'ha carregat com a part de l'objecte de tall." -msgstr[1] "%1$d Els objectes s'han carregat com a parts de l'objecte de tall" +msgstr[1] "%1$d Els objectes s'han carregat com a parts de l'objecte de tall." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" msgid "ERROR" msgstr "ERROR" @@ -5750,7 +6520,7 @@ msgstr "Error:" msgid "Warning:" msgstr "Advertència:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Exportació amb èxit." msgid "Model file downloaded." @@ -5768,11 +6538,11 @@ msgstr " Feu clic aquí per instal·lar-lo." msgid "WARNING:" msgstr "AVÍS:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "El teu model necessita suports! Si us plau, habiliteu el material de suport." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Superposició de la trajectòria del Codi-G" msgid "Support painting" @@ -5822,12 +6592,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" -msgid "Enable AI monitoring of printing" -msgstr "Habilitar el monitoratge de la impressió per IA" - -msgid "Sensitivity of pausing is" -msgstr "La sensibilitat de la pausa és" - msgid "Enable detection of build plate position" msgstr "Activar detecció de la posició de la placa" @@ -5838,21 +6602,78 @@ msgstr "" "S'ha detectat l'etiqueta de localització de la placa, la impressió es posarà " "en pausa si l'etiqueta no està en un rang perfil." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Habilitar el monitoratge de la impressió per IA" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Detecció d'Obstrucció de Broquet" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Inspecció de Primera Capa" msgid "Auto-recovery from step loss" msgstr "Recuperació automàtica de la pèrdua de passos" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Permet senyals acústics" msgid "Filament Tangle Detect" msgstr "Detecció de filament enredat" -msgid "Nozzle Clumping Detection" -msgstr "Detecció d'Obstrucció de Broquet" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Comproveu si el broquet està obstruit per filament o altres objectes " @@ -5861,15 +6682,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Tipus de broquet" -msgid "Stainless Steel" -msgstr "Acer Inoxidable" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Acer Endurit" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Acer Inoxidable" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Global" @@ -5904,15 +6739,43 @@ msgstr "Desbloquejar la placa actual" msgid "Lock current plate" msgstr "Bloquejar la placa actual" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "Editar el nom de la placa actual" msgid "Move plate to the front" -msgstr "" +msgstr "Mou la placa cap al davant" msgid "Customize current plate" msgstr "Personalitzar la placa actual" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " placa %1%:" @@ -5941,14 +6804,67 @@ msgstr "Temps estimat" msgid "Filament changes" msgstr "Canvis de filaments" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Feu clic per editar el perfil" msgid "Connection" msgstr "Connexió" -msgid "Bed type" -msgstr "Tipus de llit" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Volums de purga" @@ -5971,46 +6887,28 @@ msgstr "Cercar placa, objecte i peça." msgid "Pellets" msgstr "Pellets" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Sense filaments AMS. Seleccioneu una impressora a la pàgina \"Dispositiu\" " -"per carregar informació AMS." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "No hi ha filaments compatibles i la sincronització no s'ha realitzat." msgid "Sync filaments with AMS" msgstr "Sincronitzar filaments amb AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Sincronitzar filaments amb AMS eliminarà tots els perfils de filament i " -"colors. Voleu continuar?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Ja heu fet una sincronització, voleu sincronitzar només els canvis o tornar " -"a sincronitzar-los tots?" - -msgid "Sync" -msgstr "Sincronitzar" - -msgid "Resync" -msgstr "Resincronitzar" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "No hi ha filaments compatibles i la sincronització no s'ha realitzat." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Hi ha alguns filaments desconeguts assignats al perfil genèric. Actualitzeu " -"Snapmaker Orca o reinicieu Snapmaker Orca per comprovar si hi ha una actualització " -"dels perfils del sistema." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6018,15 +6916,15 @@ msgstr "Vols desar els canvis a \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Desmuntat amb èxit. El dispositiu %s ( %s ) ara es pot retirar de manera " "segura de l'ordinador." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "L'expulsió del dispositiu %s( %s ) ha fallat." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "S'ha detectat un projecte anterior no desat, voleu restaurar-lo?" @@ -6059,29 +6957,49 @@ msgstr "" "Habilitar la fotografia tradicional timelapse pot causar imperfeccions a la " "superfície. Es recomana canviar al mode suau." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Expandir la barra lateral" msgid "Collapse sidebar" msgstr "Replegar barra lateral" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Carregant fitxer: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -"El 3mf no és compatible amb Snapmaker Orca, només carrega dades de geometria." +"El 3MF no és compatible amb Snapmaker Orca, només carrega dades de geometria." -msgid "Load 3mf" -msgstr "Carregar 3mf" +msgid "Load 3MF" +msgstr "Carregar 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"La versió de 3mf %s és més nova que la versió de %s %s, S'han trobat les " +"La versió de 3MF %s és més nova que la versió de %s %s, S'han trobat les " "següents claus no reconegudes:" msgid "You'd better upgrade your software.\n" @@ -6089,40 +7007,51 @@ msgstr "És millor que actualitzeu el vostre programari.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"La versió de 3mf %s és més nova que la versió de %s %s, es suggereix que " +"La versió de 3MF %s és més nova que la versió de %s %s, es suggereix que " "actualitzis el teu programari." -msgid "Invalid values found in the 3mf:" -msgstr "Valors no vàlids trobats en el 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"El 3MF està generat amb una versió d'Snapmaker Orca antiga, només carrega " +"dades de geometria." + +msgid "Invalid values found in the 3MF:" +msgstr "Valors no vàlids trobats en el 3MF:" msgid "Please correct them in the param tabs" msgstr "Corregiu-los a les pestanyes de paràmetres" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"El fitxer 3mf ha realitzat les següents modificacions al Codi-G de filament " +"El fitxer 3MF ha realitzat les següents modificacions al Codi-G de filament " "o impressora:" +#, fuzzy msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Confirmeu que aquests Codis-G modificats són segurs per evitar danys a la " "màquina!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "Codis-G modificats" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" -"El fitxer 3mf té els perfils personalitzats de filament o impressora " +"El fitxer 3MF té els perfils personalitzats de filament o impressora " "següents:" +#, fuzzy msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Confirmeu que els Codis-G d'aquests perfils són segurs per evitar danys a la " @@ -6131,7 +7060,8 @@ msgstr "" msgid "Customized Preset" msgstr "Perfil personalitzat" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "El nom dels components dins del fitxer de passos no té format UTF8!" msgid "The name may show garbage characters!" @@ -6180,12 +7110,22 @@ msgstr "Carregar aquests fitxers com un sol objecte amb diverses peces?\n" msgid "Object with multiple parts was detected" msgstr "S'ha detectat un objecte amb múltiples peces" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "El fitxer no conté cap dada de geometria." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "El teu objecte sembla ser massa gran, Vols reduir-lo per adaptar-lo " "automàticament al llit?" @@ -6249,6 +7189,34 @@ msgstr "Seleccioneu un fitxer nou" msgid "File for the replace wasn't selected" msgstr "No s'ha seleccionat el fitxer per a la substitució" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Seleccioneu un fitxer, si us plau" @@ -6294,11 +7262,22 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Mode de previsualització\n" "El fitxer carregat només conté Codi-G, no pot accedir a la pàgina de " -"Preparació" +"Preparació." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "Podeu mantenir els perfils modificats al projecte nou o descartar-los" @@ -6324,13 +7303,13 @@ msgstr "Desar projecte" msgid "Importing Model" msgstr "Important Model" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "preparar el fitxer 3MF..." msgid "Download failed, unknown file format." msgstr "S'ha produït un error en la baixada, format de fitxer desconegut." -msgid "downloading project ..." +msgid "downloading project..." msgstr "descarregant projecte ..." msgid "Download failed, File size exception." @@ -6347,13 +7326,27 @@ msgstr "" "La importació a Snapmaker Orca ha fallat. Descarregueu el fitxer manualment i " "importeu-lo." +msgid "INFO:" +msgstr "INFORMACIÓ:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"No s'han proporcionat acceleracions per al calibratge. Utilitzar el valor " +"d'acceleració predeterminat " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"No s'han proporcionat velocitats per al calibratge. Utilitzar la velocitat " +"òptima predeterminada " + msgid "Import SLA archive" msgstr "Importar fitxer SLA" msgid "The selected file" msgstr "El fitxer seleccionat" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "no conté Codi-G vàlid." msgid "Error occurs while loading G-code file" @@ -6393,10 +7386,10 @@ msgstr "Només es pot obrir un fitxer de Codi-G al mateix temps." msgid "G-code loading" msgstr "Càrrega del Codi-G" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Els fitxers de Codi-G no es poden carregar amb els models junts!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "No es poden afegir models en mode de previsualització!" msgid "All objects will be removed, continue?" @@ -6435,12 +7428,18 @@ msgstr "" "El fitxer %s s'ha enviat a l'emmagatzematge de la impressora i es pot " "visualitzar a la impressora." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"No s'ha pogut realitzar l'operació booleana a les malles del model. Només " -"s'exportaran les parts positives. Proveu d'arreglar les malles i tornar-ho a " +"No s'ha pogut realitzar l'operació booleana a les malles del model. Només es " +"mantindran les parts positives. Proveu d'arreglar les malles i tornar-ho a " "provar." #, boost-format @@ -6463,18 +7462,8 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Esteu segur que voleu emmagatzemar els SVG originals amb les seves rutes " -"locals al fitxer 3MF?\n" -"Si premeu \"NO\", tots els SVG del projecte ja no es podran editar més." - -msgid "Private protection" -msgstr "Protecció privada" +"No s'ha pogut realitzar l'operació booleana a les malles del model. Només " +"s'exportaran les parts positives." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6484,6 +7473,9 @@ msgstr "" msgid "Upload and Print" msgstr "Enviar i imprimir" +msgid "Abnormal print file data. Please slice again" +msgstr "Dades anormals del fitxer d'impressió. Si us plau, torneu a laminar" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6505,8 +7497,33 @@ msgstr "" msgid "Optimize Rotation" msgstr "Optimitzar Rotació" -msgid "Invalid number" -msgstr "Número no vàlid" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Configuració de la placa" @@ -6547,9 +7564,6 @@ msgstr "Volum: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Triangles: %1%\n" -msgid "Tips:" -msgstr "Consells:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6559,13 +7573,39 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"Placa %d: no es recomana utilitzar %s per imprimir el filament %s (%s). Si " +"encara voleu fer aquesta impressió, configureu la temperatura del llit " +"d'aquest filament a diferent de zero." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Placa% d: %s no és adequada per imprimir el filament %s( %s ). Si encara " -"voleu fer aquesta impressió, configureu la temperatura del llit d'aquest " -"filament a un nombre superior a zero." msgid "Switching the language requires application restart.\n" msgstr "Per canviar d'idioma cal reiniciar l'aplicació.\n" @@ -6582,18 +7622,51 @@ msgstr "Canviant l'idioma de l'aplicació mentre es modifiquen alguns perfils." msgid "Changing application language" msgstr "Canviant de l'idioma de l'aplicació" +msgid "Asia-Pacific" +msgstr "Àsia-Pacífic" + +msgid "China" +msgstr "Xina" + +msgid "Europe" +msgstr "Europa" + +msgid "North America" +msgstr "Nord-America" + +msgid "Others" +msgstr "Altres" + msgid "Changing the region will log out your account.\n" msgstr "Si canvieu la regió, es tancarà la sessió del vostre compte.\n" msgid "Region selection" msgstr "Selecció de regió" -msgid "Second" -msgstr "Segon" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Freqüència de còpia de seguretat en segons." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "Navega" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "Triar el Directori de Descàrrega" @@ -6612,43 +7685,8 @@ msgstr "Instància actual" msgid "Current Instance Path: " msgstr "Ruta de la Instància Actual: " -msgid "General Settings" -msgstr "Configuració general" - -msgid "Asia-Pacific" -msgstr "Àsia-Pacífic" - -msgid "China" -msgstr "Xina" - -msgid "Europe" -msgstr "Europa" - -msgid "North America" -msgstr "Nord-America" - -msgid "Others" -msgstr "Altres" - -msgid "Login Region" -msgstr "Regió d'inici de sessió" - -msgid "Stealth Mode" -msgstr "Mode Silenciós" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" -"Això atura la transmissió de dades als serveis en el núvol de Bambu. Els " -"usuaris que no utilitzen màquines BBL o només utilitzen el mode LAN poden " -"activar aquesta funció de manera segura." - -msgid "Enable network plugin" -msgstr "Habilita el plugin de xarxa" - -msgid "Check for stable updates only" -msgstr "Comprovar només si hi ha actualitzacions estables" +msgid "General" +msgstr "General" msgid "Metric" msgstr "Mètric" @@ -6659,6 +7697,18 @@ msgstr "Imperial" msgid "Units" msgstr "Unitats" +msgid "Home" +msgstr "Inici" + +msgid "Default page" +msgstr "Pàgina predeterminada" + +msgid "Set the page opened on startup." +msgstr "Definiu la pàgina a obrir a l'inici." + +msgid "Enable dark mode" +msgstr "Habilitar el mode fosc" + msgid "Allow only one Snapmaker Orca instance" msgstr "Permet només una instància Snapmaker Orca" @@ -6681,14 +7731,112 @@ msgstr "" "mateix Snapmaker Orca que ja s'està executant, aquesta instància es tornarà a " "activar." -msgid "Home" -msgstr "Inici" +msgid "Show splash screen" +msgstr "Mostrar pantalla de presentació" -msgid "Default Page" -msgstr "Pàgina predeterminada" +msgid "Show the splash screen during startup." +msgstr "Mostra la pantalla de presentació durant l'inici." -msgid "Set the page opened on startup." -msgstr "Definiu la pàgina a obrir a l'inici." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Carrega-ho tot" + +msgid "Ask When Relevant" +msgstr "Preguntar quan sigui pertinent" + +msgid "Always Ask" +msgstr "Pregunta sempre" + +msgid "Load Geometry Only" +msgstr "Carregar només geometria" + +msgid "Load behaviour" +msgstr "Carregar comportament" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"S'ha de carregar la configuració de la impressora/filament/procés en obrir " +"un .3mf?" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "No hi ha avisos en carregar 3MF amb Codis-G modificats" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Còpia de seguretat automàtica" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Feu còpies de seguretat del vostre projecte periòdicament per restaurar en " +"cas de fallida ocasional." + +msgid "Preset" +msgstr "Perfil" + +msgid "Remember printer configuration" +msgstr "Recordar la configuració de la impressora" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Si està habilitada, l'Orca recordarà i canviarà automàticament la " +"configuració del filament/procés per a cada impressora." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Gestió multidispositiu" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Amb aquesta opció habilitada, podeu enviar una tasca a diversos dispositius " +"alhora i gestionar múltiples dispositius." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Tots" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Disposició automàtica de la placa després de la clonació" msgid "Touchpad" msgstr "Ratolí tàctil" @@ -6706,6 +7854,12 @@ msgstr "" "Ratolí/Botó Mig del Ratolí + moure per a panoràmica.\n" "Ratolí tàctil: Alt+moure per rotar, Majúscules+moure per a panoràmica." +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" msgstr "Fer zoom a la posició del ratolí" @@ -6724,6 +7878,15 @@ msgstr "" "Si està activat, fa servir la càmera lliure. Si no està activat, fa servir " "la càmera restringida." +msgid "Swap pan and rotate mouse buttons" +msgstr "Intercanviar la panoràmica i girar els botons del ratolí" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Si està activat, intercanvia les funcions de panoràmica i rotació dels " +"botons esquerre i dret del ratolí." + msgid "Reverse mouse zoom" msgstr "Zoom invers del ratolí" @@ -6731,100 +7894,103 @@ msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" "Si està habilitat, inverteix la direcció del zoom amb la roda del ratolí." -msgid "Show splash screen" -msgstr "Mostrar pantalla de presentació" - -msgid "Show the splash screen during startup." -msgstr "Mostra la pantalla de presentació durant l'inici." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Mostrar la notificació de \"Consell del dia\" després de l'inici" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Si s'activa, es mostren consells útils a l'inici." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Clear my choice on..." msgstr "" -"Volums de purga: calcular automàticament cada vegada que canvia el color." -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Unsaved projects" msgstr "" -"Si està activat, fa els clculs automàticament cada vegada que canviï el " -"color." -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." +msgid "Clear my choice on the unsaved projects." +msgstr "Esborrar la meva elecció sobre els projectes no desats." + +msgid "Unsaved presets" msgstr "" -"Volums de purga: calcular automàticament cada vegada que canvia el filament." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" -"Si està activat, fa els càlculs automàticament cada vegada que canvia el " -"filament" - -msgid "Remember printer configuration" -msgstr "Recordar la configuració de la impressora" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" -"Si està habilitada, l'Orca recordarà i canviarà automàticament la " -"configuració del filament/procés per a cada impressora." - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "Gestió multidispositiu(Entra en vigor després de reiniciar Studio)." - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"Amb aquesta opció habilitada, podeu enviar una tasca a diversos dispositius " -"alhora i gestionar múltiples dispositius." - -msgid "Network" -msgstr "Xarxa" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Sincronització automàtica dels perfils de l'usuari ( Impressora/Filament/" -"Processament )" - -msgid "User Sync" -msgstr "Sincronització d'usuari" - -msgid "Update built-in Presets automatically." -msgstr "Actualitzar els perfils de fàbrica automàticament." - -msgid "System Sync" -msgstr "Sincronitzar del Sistema" msgid "Clear my choice on the unsaved presets." msgstr "Esborrar la meva elecció als perfils no desats." +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "Regió d'inici de sessió" + +msgid "Stealth mode" +msgstr "Mode silenciós" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Això atura la transmissió de dades als serveis en el núvol de Bambu. Els " +"usuaris que no utilitzen màquines BBL o només utilitzen el mode LAN poden " +"activar aquesta funció de manera segura." + +msgid "Network test" +msgstr "Prova de Xarxa" + +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Comprovar només si hi ha actualitzacions estables" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Sincronització automàtica dels perfils de l'usuari ( Impressora/Filament/" +"Processament )" + +msgid "Update built-in Presets automatically." +msgstr "Actualitzar els perfils de fàbrica automàticament." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Habilita el plugin de xarxa" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + msgid "Associate files to Snapmaker Orca" msgstr "Associar fitxers a Snapmaker Orca" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Associar .3mf fitxers a Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Si està habilitat, defineix Snapmaker Orca com a l'aplicació predeterminada per " "obrir fitxers .3mf" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Associar fitxers .stl a Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Si està habilitada, defineix Snapmaker Orca com a l'aplicació predeterminada per " "obrir fitxers .stl" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Associar fitxers .step/.stp a Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Si està habilitada, defineix Snapmaker Orca com a l'aplicació predeterminada per " "obrir fitxers .step" @@ -6832,44 +7998,8 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "Associar enllaços web a Snapmaker Orca" -msgid "Associate URLs to Snapmaker Orca" -msgstr "Associeu URLs a Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Màxim projectes recents" - -msgid "Maximum count of recent projects" -msgstr "Màxima quantitat de projectes recents" - -msgid "Clear my choice on the unsaved projects." -msgstr "Esborrar la meva elecció sobre els projectes no desats." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No hi ha avisos en carregar 3MF amb Codis-G modificats" - -msgid "Auto-Backup" -msgstr "Còpia de seguretat automàtica" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." +msgid "Developer" msgstr "" -"Feu còpies de seguretat del vostre projecte periòdicament per restaurar en " -"cas de fallida ocasional." - -msgid "every" -msgstr "cada" - -msgid "The peroid of backup in seconds." -msgstr "Freqüència de còpia de seguretat en segons." - -msgid "Downloads" -msgstr "Descàrregues" - -msgid "Dark Mode" -msgstr "Mode fosc" - -msgid "Enable Dark mode" -msgstr "Habilitar el mode fosc" msgid "Develop mode" msgstr "Mode de desenvolupament" @@ -6877,11 +8007,42 @@ msgstr "Mode de desenvolupament" msgid "Skip AMS blacklist check" msgstr "Omet la comprovació de la llista negra AMS" -msgid "Home page and daily tips" -msgstr "Pàgina d'inici i consells diaris" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Mostra la pàgina d'inici a l'inici" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Nivell d'enregistrament" + +msgid "fatal" +msgstr "fatal" + +msgid "error" +msgstr "error" + +msgid "warning" +msgstr "advertència" + +msgid "debug" +msgstr "depurar" + +msgid "trace" +msgstr "traça" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Configuració de sincronització" @@ -6922,24 +8083,6 @@ msgstr "Habilitar SSL ( FTP )" msgid "Internal developer mode" msgstr "Mode de desenvolupador intern" -msgid "Log Level" -msgstr "Nivell d'enregistrament" - -msgid "fatal" -msgstr "fatal" - -msgid "error" -msgstr "error" - -msgid "warning" -msgstr "advertència" - -msgid "debug" -msgstr "depurar" - -msgid "trace" -msgstr "traça" - msgid "Host Setting" msgstr "Configuració de l'amfitrió( host )" @@ -6961,10 +8104,10 @@ msgstr "botó de desar depuració" msgid "save debug settings" msgstr "desar la configuració de depuració" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "La configuració de DEPURACIÓ s'ha desat correctament!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "L'entorn del núvol ha canviat, torneu a iniciar sessió!" msgid "System presets" @@ -6976,14 +8119,20 @@ msgstr "Perfils d'usuari" msgid "Incompatible presets" msgstr "Perfils incompatibles" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "Filaments AMS" -msgid "Click to pick filament color" -msgstr "Feu clic per triar el color del filament" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Si us plau, tria el color del filament" +msgid "Click to select filament color" +msgstr "Feu clic per triar el color del filament" msgid "Add/Remove presets" msgstr "Afegir o Suprimir perfils" @@ -6994,18 +8143,33 @@ msgstr "Editar el perfil" msgid "Project-inside presets" msgstr "Perfils interns del projecte" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Afegir o Suprimir filaments" msgid "Add/Remove materials" msgstr "Afegir o Suprimir materials" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Seleccionar/eliminar impressores ( perfils del sistema )" msgid "Create printer" msgstr "Crear impressora" +msgid "Empty" +msgstr "Buit" + +msgid "Incompatible" +msgstr "Incompatible" + msgid "The selected preset is null!" msgstr "El perfil seleccionat és nul!" @@ -7024,6 +8188,12 @@ msgstr "Introduïu el valor de capa (>= 2)." msgid "Plate name" msgstr "Nom de la placa" +msgid "Same as Global Plate Type" +msgstr "Igual que el Tipus de Base General" + +msgid "Bed type" +msgstr "Tipus de llit" + msgid "Same as Global Print Sequence" msgstr "El mateix que la Seqüència General d'Impressió" @@ -7042,9 +8212,6 @@ msgstr "Gerro en Espiral" msgid "First layer filament sequence" msgstr "Seqüència d'impressió de la primera capa" -msgid "Same as Global Plate Type" -msgstr "Igual que el Tipus de Base General" - msgid "Same as Global Bed Type" msgstr "Igual que el Tipus de Llit General" @@ -7063,29 +8230,29 @@ msgstr "Desconnectar-se" msgid "Slice all plate to obtain time and filament estimation" msgstr "Laminar tota la placa per obtenir estimació de temps i filament" -msgid "Packing project data into 3mf file" -msgstr "Empaquetar les dades del projecte en un fitxer 3mf" +msgid "Packing project data into 3MF file" +msgstr "Empaquetar les dades del projecte en un fitxer 3MF" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Pujant 3mf" msgid "Jump to model publish web page" msgstr "Anar a la pàgina web de publicació de models" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Nota: La preparació pot trigar uns quants minuts. Si us plau, sigui pacient." msgid "Publish" msgstr "Publicar" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "La publicació ha estat cancel·lada" msgid "Slicing Plate 1" msgstr "Laminant Base 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Empaquetant dades a 3mf" msgid "Jump to webpage" @@ -7104,7 +8271,7 @@ msgstr "Perfil intern del Projecte" msgid "Name is unavailable." msgstr "El nom no està disponible." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "No es permet sobreescriure un perfil del sistema" #, boost-format @@ -7112,11 +8279,12 @@ msgid "Preset \"%1%\" already exists." msgstr "El Perfil \"%1%\" ja existeix." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" "El Perfil \"%1%\" ja existeix i és incompatible amb la impressora actual." -msgid "Please note that saving action will replace this preset" +msgid "Please note that saving will overwrite this preset." msgstr "Tingueu en compte que l'acció de desar substituirà aquest perfil" msgid "The name cannot be the same as a preset alias name." @@ -7152,33 +8320,6 @@ msgstr "Simplement canviar a \"%1%\"" msgid "Task canceled" msgstr "Tasca cancel·lada" -msgid "(LAN)" -msgstr "( LAN )" - -msgid "Search" -msgstr "Cercar" - -msgid "My Device" -msgstr "El Meu Dispositiu" - -msgid "Other Device" -msgstr "Un Altre Dispositiu" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Introduir el codi d'accés" - -msgid "Can't find my devices?" -msgstr "No puc trobar els meus dispositius?" - -msgid "Log out successful." -msgstr "Tancament de sessió correcte." - -msgid "Busy" -msgstr "Ocupat" - msgid "Bambu Cool Plate" msgstr "Base Freda Bambu" @@ -7197,14 +8338,53 @@ msgstr "Base d'Alta Temperatura" msgid "Bambu Textured PEI Plate" msgstr "Base PEI amb Textura Bambu" -msgid "Send print job to" -msgstr "Enviar treball d'impressió a" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Calibratge de Dinàmiques de Flux" -msgid "Click here if you can't connect to the printer" -msgstr "Feu clic aquí si no us podeu connectar a la impressora" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "enviament completat" @@ -7212,62 +8392,15 @@ msgstr "enviament completat" msgid "Error code" msgstr "Codi d'error" -msgid "No login account, only printers in LAN mode are displayed" +msgid "High Flow" msgstr "" -"No hi ha compte d'inici de sessió, només es mostren impressores en mode LAN" - -msgid "Connecting to server" -msgstr "Connectant amb el servidor" - -msgid "Synchronizing device information" -msgstr "Sincronitzant informació del dispositiu" - -msgid "Synchronizing device information time out" -msgstr "" -"Finalització del temps de sincronització de la informació del dispositiu" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"No es pot enviar el treball d'impressió quan la impressora està actualitzant " -"el firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"La impressora està executant instruccions. Reinicieu la impressió un cop " -"finalitzi" - -msgid "The printer is busy on other print job" -msgstr "La impressora està ocupada en altres treballs d'impressió" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"El filament %s supera el nombre de ranures AMS. Actualitzeu el firmware de " -"la impressora per a que admeti l'assignació de ranures AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"El filament supera el nombre de ranures AMS. Actualitzeu el firmware de la " -"impressora per a que admeti l'assignació de ranures AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"S'han establert mapeigs de filaments a ranures AMS. Podeu fer clic a un " -"filament de dalt per canviar la vostra assignació de ranura AMS" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Feu clic a cada filament de dalt per especificar la vostra assignació de " -"ranura AMS abans d'enviar el treball d'impressió" #, c-format, boost-format msgid "" @@ -7285,39 +8418,12 @@ msgstr "" "El filament no coincideix amb el filament de la ranura AMS. Actualitzeu el " "firmware de la impressora per a que admeti l'assignació de ranures AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"El firmware de la impressora només admet el mapejat seqüencial de filament " -"=> ranura AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "Cal inserir una targeta SD abans d'imprimir." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"La impressora seleccionada (%s) és incompatible amb el perfil d'impressora " -"escollit al laminador (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Cal inserir una targeta SD per gravar el timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"No es pot enviar el treball d'impressió a una impressora el firmware de la " -"qual necessita una actualització." - -msgid "Cannot send the print job for empty plate" -msgstr "No es pot enviar el treball d'impressió d'una Base Buida" - -msgid "This printer does not support printing all plates" -msgstr "Aquesta impressora no admet impressió de Totes les Plaques" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7327,19 +8433,25 @@ msgstr "" "generaran vídeos timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"El timelapse no està suportat perquè la seqüència d'impressió està " -"configurada \"Per objecte\"." msgid "Errors" msgstr "Errors" -msgid "Please check the following:" -msgstr "Si us plau, comproveu el següent:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7356,30 +8468,8 @@ msgstr "" "filaments requerits. Si estan bé, premeu \"Confirmar\" per començar a " "imprimir." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "broquet del perfil: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "broquet memoritzat: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"El diàmetre del broquet del perfil no és coherent amb el diàmetre del " -"broquet memoritzat. Si heu canviat el broquet darrerament, aneu a Dispositiu " -"> Parts de la impressora per canviar la configuració." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"La impressió de material a alta temperatura (material %s) amb %s pot causar " -"danys al broquet" +msgid "Please check the following:" +msgstr "Si us plau, comproveu el següent:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7391,29 +8481,211 @@ msgstr "" "Feu clic al botó de confirmació si encara voleu continuar amb la impressió." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Connectant amb la impressora. No es pot cancel·lar durant el procés de " -"connexió." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Precaució d'ús! El calibratge del flux a la Base PEI amb Textura pot fallar " -"a causa de la superfície irregular." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Calibratge automàtic de flux mitjançant Micro Lidar" +msgid "Preparing print job" +msgstr "Preparant el treball d'impressió" -msgid "Modifying the device name" -msgstr "Modificant el nom del dispositiu" +msgid "The name length exceeds the limit." +msgstr "La longitud del nom supera el límit." -msgid "Bind with Pin Code" -msgstr "Enllaçar amb codi PIN" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Enviar a la targeta SD de la impressora" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Feu clic aquí si no us podeu connectar a la impressora" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"No hi ha compte d'inici de sessió, només es mostren impressores en mode LAN." + +msgid "Connecting to server..." +msgstr "Connectant amb el servidor..." + +msgid "Synchronizing device information..." +msgstr "Sincronitzant informació del dispositiu..." + +msgid "Synchronizing device information timed out." +msgstr "" +"Finalització del temps de sincronització de la informació del dispositiu." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"No es pot enviar el treball d'impressió quan la impressora està actualitzant " +"el firmware." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"La impressora està executant instruccions. Reinicieu la impressió un cop " +"finalitzi." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"No es pot enviar el treball d'impressió a una impressora el firmware de la " +"qual necessita una actualització." + +msgid "Cannot send a print job for an empty plate." +msgstr "No es pot enviar el treball d'impressió d'una Base Buida" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Aquesta impressora no admet impressió de Totes les Plaques." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7424,15 +8696,15 @@ msgstr "" "La impressora seleccionada és incompatible amb els perfils de la impressora " "escollits." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Cal inserir una targeta SD abans d'enviar-lo a la impressora." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" "Es requereix que la impressora estigui a la mateixa LAN que Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "La impressora no admet l'enviament a la targeta SD de la impressora." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Laminat ok." @@ -7492,7 +8764,7 @@ msgstr "S'ha produït un error en l'inici de sessió. Comproveu el codi PIN." msgid "Log in printer" msgstr "Iniciar sessió a la impressora" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Voleu iniciar sessió en aquesta impressora amb el compte actual?" msgid "Check the reason" @@ -7505,18 +8777,18 @@ msgid "Terms and Conditions" msgstr "Termes i Condicions" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" -"Gràcies per comprar un dispositiu Bambu Lab. Abans d'utilitzar el vostre " -"dispositiu Bambu Lab, llegiu els termes i condicions. En fer clic per " -"acceptar l'ús del vostre dispositiu Bambu Lab, accepteu complir la Política " -"de privadesa i les Condicions d'ús ( generalizant, les \"Condicions\" ). Si " -"no compleix o està d'acord amb la Política de Privacitat de Bambu Lab, si us " -"plau, no utilitzi l'equip i els serveis de Bambu Lab." +"Gràcies per adquirir un dispositiu de Bambu Lab. Abans d'utilitzar el teu " +"dispositiu Bambu Lab, si us plau, llegeix els termes i condicions. En fer " +"clic per acceptar l'ús del dispositiu Bambu Lab, acceptes complir amb la " +"Política de Privacitat i els Termes d'Ús (conjuntament, els \"Termes\"). Si " +"no compleixes o no estàs d'acord amb la Política de Privacitat de Bambu Lab, " +"si us plau, no utilitzis l'equip i els serveis de Bambu Lab." msgid "and" msgstr "i" @@ -7538,11 +8810,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "A la comunitat d'impressió 3D, aprenem dels èxits i fracassos dels altres " "per ajustar els nostres propis paràmetres i configuracions de laminat. %s " @@ -7595,7 +8867,7 @@ msgstr "" "Feu clic per restablir tots els paràmetres a l'última configuració desada." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "La Torre de Purga és necessària per a un timelapse suau. Pot haver-hi " @@ -7603,7 +8875,22 @@ msgstr "" "la Torre de Purga?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "La Torre de Purga és necessària per a un timelapse suau. Pot haver-hi " @@ -7613,43 +8900,38 @@ msgid "Still print by object?" msgstr "Continuar imprimint per objecte?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Hem afegit l'estil experimental \"Arbres Prims\" que presenta un volum de " -"suport més petit però una resistència més feble.\n" -"Recomanem utilitzar-lo amb: 0 capes d'interfície, 0 distància superior, 2 " -"perímetres." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Quan utilitzeu material de suport per a la interfície de suport, us " +"recomanem la configuració següent:\n" +"0 distància Z superior, 0 espai d'interfície, patró rectilini entrellaçat " +"i desactivar l'alçada de la capa de suport independent." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Canviar aquesta configuració automàticament? \n" +"Canviar aquesta configuració automàticament?\n" "Sí: Canviar aquesta configuració automàticament\n" "No - No canviar aquesta configuració" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Per als estils \"Arbres Forts\" i \"Arbres Híbrids\", recomanem la " -"configuració següent: almenys 2 capes d'interfície, almenys 0.1 mm de " -"distància z superior o utilitzar materials de suport a la interfície." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Quan utilitzeu material de suport per a la interfície de suport, recomanem " -"la configuració següent:\n" -"0 distància superior Z, 0 espaiat de la interfície, patró concèntric i " -"desactivar alçada de suport independent d'alçada de capa" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7664,6 +8946,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Estàs segur que vols activar aquesta opció?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7673,14 +8963,14 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "L'alçada de la capa supera el límit a Configuració de la Impressora -> " "Extrusora -> Límits d'alçada de la capa, això pot causar problemes de " "qualitat d'impressió." -msgid "Adjust to the set range automatically? \n" -msgstr "Voleu ajustar el rang automàticament? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Voleu ajustar el rang automàticament?\n" msgid "Adjust" msgstr "Ajustar" @@ -7690,9 +8980,9 @@ msgstr "Ignorar" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "Característica experimental: Retreure i tallar el filament a major distància " "durant els canvis de filaments per minimitzar el flux. Tot i que pot reduir " @@ -7701,9 +8991,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Característica experimental: Retreure i tallar el filament a major distància " "durant els canvis de filaments per minimitzar el rentat. Tot i que pot " @@ -7722,6 +9012,82 @@ msgstr "" "fent clic amb el botó dret a una posició buida de la placa i triant \"Afegir " "primitiva\"->\"Torre de Purga Timelapse\"." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Es crearà una còpia del preajustament del sistema actual, que se separarà " +"del preajustament del sistema." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"La configuració personalitzada actual se separarà de la configuració del " +"sistema principal." + +msgid "Modifications to the current profile will be saved." +msgstr "Es desaran les modificacions al perfil actual." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Aquesta acció no és reversible.\n" +"Vols continuar?" + +msgid "Detach preset" +msgstr "Separa el predefinit" + +msgid "This is a default preset." +msgstr "Aquest és un predefinit per defecte." + +msgid "This is a system preset." +msgstr "Aquest és un predefinit del sistema." + +msgid "Current preset is inherited from the default preset." +msgstr "El predefinit actual s'hereta del predefinit per defecte." + +msgid "Current preset is inherited from" +msgstr "El predefinit actual s'hereta de" + +msgid "It can't be deleted or modified." +msgstr "No es pot suprimir ni modificar." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Qualsevol modificació s'ha de desar com a nou predefinit heretat d'aquest." + +msgid "To do that please specify a new name for the preset." +msgstr "Per fer-ho, especifiqueu un nom nou per al predefinit." + +msgid "Additional information:" +msgstr "Informació addicional:" + +msgid "vendor" +msgstr "fabricant" + +msgid "printer model" +msgstr "model d'impressora" + +msgid "default print profile" +msgstr "perfil d'impressió per defecte" + +msgid "default filament profile" +msgstr "perfil de filament per defecte" + +msgid "default SLA material profile" +msgstr "perfil de material de l'SLA per defecte" + +msgid "default SLA print profile" +msgstr "perfil d'impressió de l'SLA per defecte" + +msgid "full profile name" +msgstr "nom complet del perfil" + +msgid "symbolic profile name" +msgstr "nom simbòlic del perfil" + msgid "Line width" msgstr "Amplada de línia" @@ -7789,15 +9155,27 @@ msgstr "Vora d'Adherència" msgid "Support filament" msgstr "Filament de suport" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "Suports d'arbre" -msgid "Skirt" -msgstr "Faldilla" +msgid "Multimaterial" +msgstr "Multimaterial" msgid "Prime tower" msgstr "Torre de Purga" +msgid "Filament for Features" +msgstr "Filament per a característiques" + +msgid "Ooze prevention" +msgstr "Prevenció de degoteig" + +msgid "Skirt" +msgstr "Faldilla" + msgid "Special mode" msgstr "Ajustos especials" @@ -7851,42 +9229,53 @@ msgstr "" "Rang de temperatures del broquet recomanat per a aquest filament. 0 " "significa que no es configura" +msgid "Flow ratio and Pressure Advance" +msgstr "Relació de Flux i Avanç de Pressió Lineal( Pressure advance )" + msgid "Print chamber temperature" msgstr "Temperatura de la cambra d'impressió" msgid "Print temperature" msgstr "Temperatura d'impressió" -msgid "Nozzle" -msgstr "Broquet( nozzle )" - msgid "Nozzle temperature when printing" msgstr "Temperatura del broquet en imprimir" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Cool Plate (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "Base Freda" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Temperatura del llit quan s'instal·la la Base Freda. El valor 0 significa " "que el filament no admet imprimir a la Base Freda" -msgid "Textured Cool plate" -msgstr "" +msgid "Textured Cool Plate" +msgstr "Placa Freda Texturitzada" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" +"Temperatura del llit quan la placa freda està instal·lada. Un valor de 0 " +"significa que el filament no és compatible per imprimir sobre la Placa Freda " +"Texturitzada" -msgid "Engineering plate" -msgstr "Base d'enginyeria" +msgid "Engineering Plate" +msgstr "Base d'Enginyeria" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Temperatura del llit quan s'instal·la la Base d'Enginyeria. El valor 0 " "significa que el filament no admet imprimir a la Base d'Enginyeria" @@ -7895,9 +9284,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Base PEI Llisa / Base d'Alta Temperatura" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Temperatura del llit quan s'instal·la la placa PEI Llisa/Base d'Alta " "Temperatura. El valor 0 significa que el filament no admet imprimir a la " @@ -7907,8 +9296,8 @@ msgid "Textured PEI Plate" msgstr "Base PEI amb Textura" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Temperatura del llit quan s'instal·la la placa PEI amb Textura. El valor 0 " "significa que el filament no admet imprimir a la placa PEI amb Textura" @@ -7916,9 +9305,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Limitació de la velocitat volumètrica" -msgid "Cooling" -msgstr "Refrigeració" - msgid "Cooling for specific layer" msgstr "Refrigeració per a capes específiques" @@ -7968,25 +9354,34 @@ msgstr "Codi-G Inicial del Filament" msgid "Filament end G-code" msgstr "Codi-G Final del Filament" -msgid "Multimaterial" -msgstr "Multimaterial" - msgid "Wipe tower parameters" msgstr "Paràmetres de la Torre de Purga" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Paràmetres del canvi d'eina per a impressores d'un únic extrusor MM" -msgid "Ramming settings" -msgstr "Configuració de Moldejat de punta( Ramming )" +msgid "Set" +msgstr "Establir" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Paràmetres del canvi d'eina per a impressores multi-extrusor MM" +msgid "Dependencies" +msgstr "Dependències" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Perfils de processos compatibles" + msgid "Printable space" msgstr "Espai imprimible" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Valor no vàlid proporcionat per al paràmetre %1%: %2%" @@ -8009,7 +9404,7 @@ msgstr "Malla de placa adaptativa" msgid "Accessory" msgstr "Accessori" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "Codi-G de màquina" msgid "Machine start G-code" @@ -8027,9 +9422,12 @@ msgstr "Codi-G per abans d'un canvi de capa" msgid "Layer change G-code" msgstr "Codi-G per després d'un canvi de capa" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "Codi-G time lapse" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "Codi-G de canvi de filament" @@ -8048,6 +9446,12 @@ msgstr "Capacitat de moviment" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Limitació de velocitat" @@ -8057,20 +9461,45 @@ msgstr "Limitació d'acceleració" msgid "Jerk limitation" msgstr "Limitació de la sacsejada( Jerk )" -msgid "Single extruder multimaterial setup" -msgstr "Configuració d'extrusor únic multimaterial" +msgid "Single extruder multi-material setup" +msgstr "Configuració d'extrusor únic per a múltiples materials" + +msgid "Number of extruders of the printer." +msgstr "Nombre d'extrusores de la impressora." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"S'ha seleccionat l'extrusor únic per a múltiples materials,\n" +"i tots els extrusors han de tenir el mateix diàmetre.\n" +"Vols canviar el diàmetre de tots els extrusors al valor del diàmetre de la " +"boquilla del primer extrusor?" + +msgid "Nozzle diameter" +msgstr "Diàmetre del broquet( nozzle )" msgid "Wipe tower" msgstr "Torre de Purga" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Paràmetres d'extrusor únic multimaterial" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Aquesta és una impressora de múltiples materials amb un sol extrusor, i els " +"diàmetres de tots els extrusors es configuraran amb el nou valor. Vols " +"continuar?" + msgid "Layer height limits" msgstr "Límits d'alçada de capa" -msgid "Lift Z Enforcement" -msgstr "Forçar elevació Z" +msgid "Z-Hop" +msgstr "Z-Hop" msgid "Retraction when switching material" msgstr "Retracció en canviar de material" @@ -8086,6 +9515,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Retracció de Fimware" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Separat" @@ -8097,13 +9534,13 @@ msgstr "" "El perfil de Filament %d i el perfil de Procés %d estan adjunts a aquesta " "impressora. Aquests perfils se suprimirien si se suprimeix la impressora." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "Els perfils heretats per altres perfils no es poden eliminar!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Els següent perfil hereta aquesta d'aquest altre." -msgstr[1] "Els següents perfils hereten d'aquest altre." +msgstr[1] "Els següents perfils hereten d'aquest perfil." #. TRN Remove/Delete #, boost-format @@ -8115,24 +9552,17 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "El següent perfil també se suprimirà." msgstr[1] "Els següents perfils també se suprimiran." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Esteu segur que voleu suprimir el perfil seleccionat? \n" -"Si el perfil correspon a un filament que s'utilitza actualment a la " -"impressora, restabliu la informació del filament per a aquesta ranura." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Segur que voleu %1% el perfil seleccionat?" -msgid "All" -msgstr "Tots" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Establir" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "Feu clic per esborrar el valor actual i agafar el valor global." @@ -8222,9 +9652,9 @@ msgstr "" "següents canvis no desats:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "" -"Heu canviat alguns paràmetres de la configuració predeterminada \"%1%\". " +"Heu canviat alguns paràmetres de la configuració predeterminada \"%1%\"." msgid "" "\n" @@ -8258,9 +9688,6 @@ msgstr "" msgid "Extruders count" msgstr "Nombre d'extrusors" -msgid "General" -msgstr "General" - msgid "Capabilities" msgstr "Capacitats" @@ -8325,6 +9752,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Nom del model" +msgid "Description:" +msgstr "Descripció:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Actualització" @@ -8335,22 +9765,19 @@ msgstr "Una nova versió està disponible" msgid "Configuration update" msgstr "Actualització de la configuració" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Un nou paquet de configuració està disponible, Vols instal·lar-lo?" -msgid "Description:" -msgstr "Descripció:" - msgid "Configuration incompatible" msgstr "Configuració incompatible" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "el paquet de configuració és incompatible amb l'aplicació actual." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "El paquet de configuració és incompatible amb l'aplicació actual.\n" "%s actualitzarà el paquet de configuració, En cas contrari no podrà iniciar-" @@ -8360,9 +9787,6 @@ msgstr "" msgid "Exit %s" msgstr "Sortir %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "el paquet Configuració és incompatible amb l'aplicació actual." - msgid "Configuration updates" msgstr "Actualitzacions de configuració" @@ -8372,24 +9796,41 @@ msgstr "No hi ha actualitzacions disponibles." msgid "The configuration is up to date." msgstr "La configuració està actualitzada." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Importar color de l'arxiu Obj" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "Especificar el nombre de colors:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "El recompte de colors ha d'estar en rang [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "Recomanat " -msgid "Current filament colors:" -msgstr "Color del filament predeterminat:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Configuració ràpida:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "Concordança de color" @@ -8400,31 +9841,175 @@ msgstr "Concordança aproximada de color." msgid "Append" msgstr "Afegir" -msgid "Add consumable extruder after existing extruders." -msgstr "Afegiu extrusora consumible després dels extrusors existents." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "Restableix els extrusors mapejats." -msgid "Cluster colors" -msgstr "Colors del clúster" - -msgid "Map Filament" -msgstr "Mapejar Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Nota: El color ha estat seleccionat, podeu triar D'acord \n" -" per continuar-lo o ajustar-lo manualment." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Utilitzar AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"La impressora seleccionada (%s) és incompatible amb el perfil d'impressora " +"escollit al laminador (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"El timelapse no està suportat perquè la seqüència d'impressió està " +"configurada \"Per objecte\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Advertència:El recompte de nous afegits i \n" -" Els extrusors de corrent superen els 16." msgid "Ramming customization" msgstr "Configuració de Moldejat de punta( Ramming )" @@ -8452,37 +10037,24 @@ msgstr "" "Aquest és un ajustament per a experts, ajustar-lo incorrectament podria " "produir embussos, que el pinyó de l'extrusor malmeti el filament, etc." -msgid "Total ramming time" -msgstr "Temps total de moldejat de punta( ramming )" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Volum de moldejat de punta( ramming ) total" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Ample de la línia de moldejat de punta( ramming )" - -msgid "Ramming line spacing" -msgstr "Espai entre línies de Moldejat de punta( Ramming )" - -msgid "Auto-Calc" -msgstr "Calcular Automàticament" - -msgid "Re-calculate" -msgstr "Tornar a calcular" - -msgid "Flushing volumes for filament change" -msgstr "Volums de purga per al canvi de filament" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca tornarà a calcular els volums de purga cada vegada que canviï el color " -"del filament. Podeu desactivar el recàlcul automàtic a Snapmaker Orca > " -"Preferències" msgid "Flushing volume (mm³) for each filament pair." msgstr "Volum de purga ( mm³ ) per a cada parell de filaments." @@ -8495,23 +10067,23 @@ msgstr "Suggeriment: Volum de Purga en el rang [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "El multiplicador ha d'estar en el rang [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Tornar a calcular" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Multiplicador" -msgid "unloaded" -msgstr "descarregat" +msgid "Flushing volumes for filament change" +msgstr "Volums de purga per al canvi de filament" -msgid "loaded" -msgstr "carregat" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Des de" - -msgid "To" -msgstr "A" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8529,7 +10101,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Falta el component BambuSource registrat per a la reproducció multimèdia! " "Torneu a instal·lar BambuStutio o busqueu ajuda postvenda." @@ -8543,12 +10115,12 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "Al vostre sistema li falten còdecs H.264 per al GStreamer, necessaris per " -"reproduir vídeo. (Proveu d'instal·lar els paquets gstreamer1.0-plugins-bad " -"o gstreamer1.0-libav i, a continuació, reinicieu Snapmaker Orca?)" +"reproduir vídeo. (Proveu d'instal·lar els paquets gstreamer1.0-plugins-bad o " +"gstreamer1.0-libav i, a continuació, reinicieu Snapmaker Orca?)" msgid "Bambu Network plug-in not detected." msgstr "No s'ha detectat el Plug-In de Xarxa Bambu." @@ -8575,12 +10147,6 @@ msgstr "Llista d'objectes" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importar dades de geometria des de fitxers STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Maj+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Maj+G" - msgid "Paste from clipboard" msgstr "Enganxa des del porta-retalls" @@ -8597,69 +10163,42 @@ msgstr "Mostrar la llista de dreceres de teclat" msgid "Global shortcuts" msgstr "Dreceres Globals" -msgid "Rotate View" -msgstr "Rotar la vista" - msgid "Pan View" msgstr "Vista Panoràmica" -msgid "Mouse wheel" -msgstr "Roda del ratolí" +msgid "Rotate View" +msgstr "Rotar la vista" msgid "Zoom View" msgstr "Vista amb Zoom" -msgid "Shift+A" -msgstr "Maj+A" - -msgid "Shift+R" -msgstr "Maj+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Orienta/alinea automàticament els objectes seleccionats o tots els objectes. " "Si hi ha objectes seleccionats, només orientarà/alinearà els seleccionats. " -"En cas contrari, orientarà/alinearà tots els objectes de la placa actual." +"En cas contrari, orientarà/alinearà tots els objectes del projecte actual." -msgid "Shift+Tab" -msgstr "Maj+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Orienta/alinea automàticament tots els objectes de la placa actual." msgid "Collapse/Expand the sidebar" msgstr "Replegar/Expandir barra lateral" -msgid "⌘+Any arrow" -msgstr "⌘+Qualsevol fletxa" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Moviment a l'espai de la càmera" -msgid "⌥+Left mouse button" -msgstr "⌥+Botó esquerre del ratolí" - msgid "Select a part" msgstr "Seleccionar una peça" -msgid "⌘+Left mouse button" -msgstr "⌘+Botó esquerre del ratolí" - msgid "Select multiple objects" msgstr "Seleccionar múltiples objectes" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Qualsevol fletxa" - -msgid "Alt+Left mouse button" -msgstr "Alt+Botó esquerre del ratolí" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Botó esquerre del ratolí" - -msgid "Shift+Left mouse button" -msgstr "Maj+Botó esquerre del ratolí" - msgid "Select objects by rectangle" msgstr "Seleccionar objectes per rectangle" @@ -8687,9 +10226,6 @@ msgstr "Fletxa cap a la dreta" msgid "Move selection 10 mm in positive X direction" msgstr "Moure la selecció 10 mm en direcció X positiva" -msgid "Shift+Any arrow" -msgstr "Maj+Qualsevol fletxa" - msgid "Movement step set to 1 mm" msgstr "Pas de moviment configurat a 1 mm" @@ -8723,17 +10259,23 @@ msgstr "Seleccionar tots els objectes" msgid "Gizmo move" msgstr "Gizmo de Moviment" +msgid "Gizmo rotate" +msgstr "Gizmo de Rotació" + msgid "Gizmo scale" msgstr "Gizmo d'Escala" -msgid "Gizmo rotate" -msgstr "Gizmo de Rotació" +msgid "Gizmo place face on bed" +msgstr "Gizmo de recolzament sobre la Cara a la placa" msgid "Gizmo cut" msgstr "Gizmo de Tall" -msgid "Gizmo Place face on bed" -msgstr "Gizmo de Recolzament sobre la Cara a la placa" +msgid "Gizmo mesh boolean" +msgstr "Gizmo booleà de malla" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "Gizmo de Punts de suport SLA" @@ -8741,8 +10283,17 @@ msgstr "Gizmo de Punts de suport SLA" msgid "Gizmo FDM paint-on seam" msgstr "Eina de Pintat de costures FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo de Text en relleu / gravat" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo de text en relleu/gravat" + +msgid "Gizmo measure" +msgstr "Gizmo mesurar" + +msgid "Gizmo assemble" +msgstr "Gizmo ensamblar" + +msgid "Gizmo brim ears" +msgstr "Gizmo orelles de la Vora d'Adherència" msgid "Zoom in" msgstr "Augmentar zoom" @@ -8759,32 +10310,20 @@ msgstr "Plataforma" msgid "Move: press to snap by 1mm" msgstr "Moure: Clicka per ajustar en passos d'1 mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Roda del ratolí" - msgid "Support/Color Painting: adjust pen radius" msgstr "Suport/Pintat de color: configuració del radi de la ploma" -msgid "⌥+Mouse wheel" -msgstr "⌥+Roda del ratolí" - msgid "Support/Color Painting: adjust section position" msgstr "Suport/Pintat de color: configuració de la posició de la secció" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Roda del ratolí" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Roda del ratolí" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Establir el número d'extrusor per als objectes i les peces" -msgid "Delete objects, parts, modifiers " -msgstr "Eliminar objectes, peces, modificadors " +msgid "Delete objects, parts, modifiers" +msgstr "Eliminar objectes, peces, modificadors" msgid "Select the object/part and press space to change the name" msgstr "Seleccioneu l'objecte/peça i premeu espai per canviar-ne el nom" @@ -8820,15 +10359,12 @@ msgid "On/Off one layer mode of the vertical slider" msgstr "" "Activar/desactivar el mode de capa única de la barra de desplaçament vertical" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Activar/Desactivar finestra de Codi-G" msgid "Move slider 5x faster" msgstr "Moure la barra de desplaçament 5 vegades més ràpid" -msgid "Shift+Mouse wheel" -msgstr "Maj+Roda del ratolí" - msgid "Horizontal slider - Move to start position" msgstr "Control lliscant horitzontal - Mou fins a la posició inicial" @@ -8839,7 +10375,7 @@ msgid "Release Note" msgstr "Notes de la versió" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "informació d'actualització de la versió %s:" msgid "Network plug-in update" @@ -8852,7 +10388,7 @@ msgstr "" "s'executi Snapmaker Orca." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Un nou plugin de Xarxa( %s ) disponible, Vols instal·lar-lo?" msgid "New version of Snapmaker Orca" @@ -8861,64 +10397,29 @@ msgstr "Nova versió d'Snapmaker Orca" msgid "Skip this Version" msgstr "Omet aquesta versió" -msgid "Done" -msgstr "Fet" - -msgid "resume" -msgstr "reprendre" - -msgid "Resume Printing" -msgstr "Reprendre Impressió" - -msgid "Resume Printing(defects acceptable)" -msgstr "Reprendre la impressió (defectes acceptables)" - -msgid "Resume Printing(problem solved)" -msgstr "Reprendre la impressió (problema resolt)" - -msgid "Stop Printing" -msgstr "Deixar d'imprimir" - -msgid "Check Assistant" -msgstr "Assistent de comprovació" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruït, Continuar" - -msgid "Not Extruded Yet, Retry" -msgstr "Encara no s'ha Extruït, Tornar a Intentar-ho" - -msgid "Finished, Continue" -msgstr "Finalitzat, Continuar" - -msgid "Load Filament" -msgstr "Carregar Filament" - -msgid "Filament Loaded, Resume" -msgstr "Filament carregat, reprendre" - -msgid "View Liveview" -msgstr "Veure Liveview" - msgid "Confirm and Update Nozzle" msgstr "Confirmar i Actualitzar el broquet" -msgid "LAN Connection Failed (Sending print file)" -msgstr "" -"S'ha produït un error en la Connexió de Xarxa LAN ( Enviant un fitxer " -"d'impressió )" +msgid "Connect the printer using IP and access code" +msgstr "Connecteu la impressora mitjançant IP i codi d'accés" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Pas 1: Confirmeu que Snapmaker Orca i la impressora es troben a la mateixa LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Pas 2: Si la IP i el Codi d'Accés següent són diferents dels valors reals de " -"la impressora, corregiu-los." msgid "IP" msgstr "IP" @@ -8926,20 +10427,42 @@ msgstr "IP" msgid "Access Code" msgstr "Clau d'Accés" +msgid "Printer model" +msgstr "Model d'impressora" + +msgid "Printer name" +msgstr "Nom de la impressora" + msgid "Where to find your printer's IP and Access Code?" msgstr "On podeu trobar la IP i el Codi d'Accés de la impressora?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Pas 3: Feu ping a l'adreça IP per comprovar si hi ha pèrdua de paquets i " -"latència." +msgid "Connect" +msgstr "Connecta" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Configuració manual" msgid "IP and Access Code Verified! You may close the window" msgstr "IP i Codi d'Accés verificats! Podeu tancar la finestra" +msgid "connecting..." +msgstr "connectant..." + +msgid "Failed to connect to printer." +msgstr "No s'ha pogut connectar a la impressora." + +msgid "Failed to publish login request." +msgstr "No s'ha pogut publicar la sol·licitud d'inici de sessió." + +msgid "The printer has already been bound." +msgstr "La impressora ja ha estat vinculada." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "El mode d'impressora és incorrecte, canvieu a Només LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "S'està connectant a la impressora... El diàleg es tancarà més tard" + msgid "Connection failed, please double check IP and Access Code" msgstr "S'ha produït un error de Connexió, comproveu la IP i el Codi d'Accés" @@ -8950,31 +10473,51 @@ msgstr "" "Ha fallat la connexió! Si la teva IP i el teu Codi d'Accés són correctes, \n" "Aneu al pas 3 per resoldre problemes de xarxa" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Model:" -msgid "Serial:" -msgstr "Número de Sèrie:" - -msgid "Version:" -msgstr "Versió:" - msgid "Update firmware" msgstr "Actualitzar el firmware" msgid "Beta version" msgstr "Versió beta" -msgid "Latest version" -msgstr "Última versió" - msgid "Updating" msgstr "Actualitzant" -msgid "Updating failed" +msgid "Update failed" msgstr "S'ha produït un error en l'actualització" -msgid "Updating successful" +msgid "Update successful" msgstr "Actualització correcta" msgid "" @@ -9005,8 +10548,8 @@ msgstr "" msgid "Extension Board" msgstr "Targeta d'Ampliació" -msgid "Saving objects into the 3mf failed." -msgstr "El desament d'objectes al 3mf no ha funcionat." +msgid "Saving objects into the 3MF failed." +msgstr "El desament d'objectes al 3MF no ha funcionat." msgid "Only Windows 10 is supported." msgstr "Només s'admet Windows 10." @@ -9029,22 +10572,22 @@ msgstr "No s'ha pogut reparar." msgid "Loading repaired objects" msgstr "Carregant els objectes reparats" -msgid "Exporting 3mf file failed" -msgstr "S'ha produït un error en l'exportació del fitxer 3mf" +msgid "Exporting 3MF file failed" +msgstr "S'ha produït un error en l'exportació del fitxer 3MF" -msgid "Import 3mf file failed" -msgstr "S'ha produït un error en l'importació del fitxer 3mf" +msgid "Import 3MF file failed" +msgstr "S'ha produït un error en l'importació del fitxer 3MF" -msgid "Repaired 3mf file does not contain any object" +msgid "Repaired 3MF file does not contain any object" msgstr "El fitxer 3MF reparat no conté cap objecte" -msgid "Repaired 3mf file contains more than one object" +msgid "Repaired 3MF file contains more than one object" msgstr "El fitxer 3MF reparat conté més d'un objecte" -msgid "Repaired 3mf file does not contain any volume" +msgid "Repaired 3MF file does not contain any volume" msgstr "El fitxer 3MF reparat no conté cap volum" -msgid "Repaired 3mf file contains more than one volume" +msgid "Repaired 3MF file contains more than one volume" msgstr "El fitxer 3MF reparat conté més d'un volum" msgid "Repair finished" @@ -9099,7 +10642,14 @@ msgid "No object can be printed. Maybe too small" msgstr "No es pot imprimir cap objecte. Potser que sigui massa petit" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"La teva impressió és molt a prop de les regions de purga. Assegureu-vos que " +"no hi ha col·lisions." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "No s'ha pogut generar el Codi-G per un Codi-G personalitzat no vàlid.\n" @@ -9114,6 +10664,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "Generant Codi-G: capa %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Perímetre interior" @@ -9151,7 +10710,7 @@ msgid "Multiple" msgstr "Múltiple" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "No s'ha pogut calcular l'amplada de línia de %1%. No es pot obtenir valor de " "\"%2%\" " @@ -9271,14 +10830,16 @@ msgstr "%1% està massa a prop d'altres i es poden produir col·lisions." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% és massa alt i es provocaran col·lisions." -msgid " is too close to others, there may be collisions when printing." -msgstr " està massa a prop dels altres, pot haver-hi col·lisions en imprimir." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " està massa a prop de l'àrea d'exclusió, pot haver-hi col·lisions en " "imprimir." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Torre de Purga" @@ -9290,13 +10851,34 @@ msgstr "" " està massa a prop de la zona d'exclusió, i es provocaran col·lisions.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"No es poden imprimir junts múltiples filaments que tinguin una gran " -"diferència de temperatura. En cas contrari, l'extrusor i el broquet es poden " -"bloquejar o danyar durant la impressió" msgid "No extrusions under current settings." msgstr "No hi ha extrusions a la configuració actual." @@ -9308,6 +10890,15 @@ msgstr "" "El mode suau de timelapse no està permès quan la seqüència \"Per objecte\" " "està habilitada." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9321,6 +10912,14 @@ msgid "" msgstr "" "El mode Gerro en Espiral no funciona quan un objecte conté més d'un material." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Tot i que l'objecte %1% s'adapta al volum de construcció, la seva última " +"capa supera l'alçada màxima del volum de construcció." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "L'objecte %1% supera l'alçada màxima del volum de construcció." @@ -9344,11 +10943,13 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Alçada de Capa Variable no és compatible amb suports Orgànics." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"No es permeten diferents diàmetres de broquet i diferents diàmetres de " -"filament quan s'habilita la Torre de Purga." +"És possible que els diferents diàmetres de broquet i els diferents diàmetres " +"de filament no funcionin bé quan la torre principal està activada. És molt " +"experimental, així que si us plau, procediu amb precaució." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9358,10 +10959,11 @@ msgstr "" "relatiu de l'extrusor ( use_relative_e_distances=1 )." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Actualment, la Prevenció d'Ooze( goteig ) no és compatible amb la Torre de " -"Purga habilitada." +"La prevenció de degoteig només és compatible amb la torre de neteja quan " +"'single_extruder_multi_material' està deshabilitat." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9380,23 +10982,31 @@ msgstr "" "La Torre de Purga no està suportada quan l'Alçada de Capa Adaptativa està " "activada. Requereix que tots els objectes tinguin la mateixa alçada de capa." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "La Torre de Purga requereix que el \"distància de suport\" sigui múltiple de " "l'alçada de capa" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "La Torre de Purga requereix que tots els objectes tinguin les mateixes " "alçades de capa" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "La Torre de Purga requereix que tots els objectes s'imprimeixin sobre el " "mateix nombre de capes de Vora d'Adherència" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"La torre de neteja només s'admet per a diversos objectes si s'imprimeixen " +"amb el mateix support_top_z_distance" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9406,17 +11016,32 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "La Torre de Purga només està suportat si tots els objectes tenen la mateixa " "alçada variable de capa" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "Un o més objectes han estat assignats a un extrusor inexistent." + msgid "Too small line width" msgstr "Amplada de línia massa petita" msgid "Too large line width" msgstr "Amplada de línia massa gran" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Impressió amb múltiples extrusors de diferents diàmetres de broquet. Si el " +"suport s'ha d'imprimir amb el filament actual (support_filament == 0 o " +"support_interface_filament == 0), tots els broquets han de ser del mateix " +"diàmetre." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9450,7 +11075,7 @@ msgstr "" "S'usen suports forçats, però el suport no està habilitat. Si us plau, " "habiliteu el suport." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "L'alçada de la capa no pot superar el diàmetre del broquet" msgid "" @@ -9501,6 +11126,15 @@ msgstr "" "Podeu ajustar la configuració de sacsejada màxima a la configuració de la " "impressora per obtenir velocitats més altes." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9531,6 +11165,18 @@ msgstr "" "Podeu ajustar el valor machine_max_acceleration_travel a la configuració de " "la impressora per obtenir velocitats més altes." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"La contracció del filament no s'utilitzarà perquè la contracció del filament " +"per als filaments utilitzats difereix significativament." + msgid "Generating skirt & brim" msgstr "Generant Faldilla i Vora d'Adherència" @@ -9543,9 +11189,15 @@ msgstr "Generant el Codi-G" msgid "Failed processing of the filename_format template." msgstr "Error en el processament de la plantilla filename_format." +msgid "Printer technology" +msgstr "Tecnologia d'impressora" + msgid "Printable area" msgstr "Àrea imprimible" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Zona d'exclusió de la placa" @@ -9569,8 +11221,8 @@ msgid "Elephant foot compensation" msgstr "Compensació de Peu d'Elefant" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Redueix la capa inicial a la placa d'impressió per compensar l'efecte de Peu " "d'Elefant" @@ -9594,7 +11246,7 @@ msgstr "capes" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Alçada de laminat per a cada capa. Una alçada de capa més petita significa " "més precisió i més temps d'impressió" @@ -9602,13 +11254,21 @@ msgstr "" msgid "Printable height" msgstr "Alçada imprimible" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "L'alçada màxima imprimible està limitada pel mecanisme d'impressora" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "Orientació preferida" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" "Orientar automàticament els stls a l'eix Z després de la importació inicial" @@ -9618,7 +11278,7 @@ msgstr "Noms de perfils de la impressora" msgid "Use 3rd-party print host" msgstr "Utilitzeu l'amfitrió d'impressió de 3a part" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "Permetre controlar la impressora de BambuLab a través d'amfitrions " "d'impressió de 3 ª part" @@ -9643,7 +11303,7 @@ msgid "Device UI" msgstr "Interfície d'Usuari del dispositiu" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Especifiqueu l'URL de la interfície d'usuari del dispositiu si no és el " "mateix que print_host" @@ -9658,7 +11318,7 @@ msgstr "" "Snapmaker Orca pot pujar fitxers de Codi-G a una impressora. Aquest camp ha de " "contenir la clau API o la contrasenya necessària per a l'autenticació." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Nom de la impressora" msgid "HTTPS CA File" @@ -9691,7 +11351,7 @@ msgstr "" "faltin punts de distribució o estiguin desconnectats. Hom pot voler " "habilitar aquesta opció per als certificats autosignats si la connexió falla." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Noms dels perfils relacionats amb la impressora física" msgid "Authorization Type" @@ -9703,22 +11363,23 @@ msgstr "Codi API" msgid "HTTP digest" msgstr "HTTP-Digest" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Evitar creuar perímetre" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Desviar i evitar travessar el perímetre ja que podria produir grumolls a la " "superfície" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Evitar creuar el perímetre - Longitud màxima del desviament" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Distància màxima de desviament per evitar creuar perímetres. No desviar si " "la distància del desviament és major que aquest valor. La longitud del " @@ -9733,40 +11394,44 @@ msgid "Other layers" msgstr "Altres capes" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" -"Temperatura del llit de les capes excepte la inicial. El valor 0 significa " -"que el filament no admet imprimir a una Base Freda" - -msgid "°C" -msgstr "°C" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Temperatura del llit de les capes excepte la inicial. El valor 0 significa " -"que el filament no admet imprimir a la Base d'Enginyeria" +"que el filament no admet imprimir a una Base Freda." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "Temperatura del llit de les capes excepte la inicial. El valor 0 significa " -"que el filament no admet imprimir a la Base d'Alta Temperatura" +"que el filament no admet imprimir a la Placa Freda Texturitzada." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Temperatura del llit de les capes excepte la inicial. El valor 0 significa " -"que el filament no admet imprimir a la Base PEI amb Textura" +"que el filament no admet imprimir a la Base d'Enginyeria." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Temperatura del llit de les capes excepte la inicial. El valor 0 significa " +"que el filament no admet imprimir a la Base d'Alta Temperatura." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Temperatura del llit de les capes excepte la inicial. El valor 0 significa " +"que el filament no admet imprimir a la Base PEI amb Textura." msgid "Initial layer" msgstr "Capa inicial" @@ -9775,51 +11440,61 @@ msgid "Initial layer bed temperature" msgstr "Temperatura del llit en la capa inicial" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"Temperatura del llit de la capa inicial. El valor 0 significa que el " +"filament no admet la impressió al Cool Plate SuperTack" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Temperatura del llit en la capa inicial. El valor 0 significa que el " "filament no admet imprimir a la Base Freda" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" +"Temperatura del llit en la capa inicial. El valor 0 significa que el " +"filament no admet imprimir a la Placa Freda Texturitzada" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Temperatura del llit en la capa inicial. El valor 0 significa que el " "filament no admet imprimir a la Base d'Enginyeria" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Temperatura del llit en la capa inicial. El valor 0 significa que el " "filament no admet imprimir a la Base d'Alta Temperatura" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Temperatura del llit en la capa inicial. El valor 0 significa que el " "filament no admet imprimir a la Base PEI amb Textura" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Tipus de llit suportats per la impressora" msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Base d'Enginyeria" +msgstr "Placa Freda Llisa" msgid "Smooth High Temp Plate" +msgstr "Placa Llisa d'Alta Temperatura" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" @@ -9834,7 +11509,7 @@ msgstr "El nombre d'altres capes de la seqüència d'impressió" msgid "Other layers filament sequence" msgstr "Seqüència de filaments d'altres capes" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Aquest Codi-G s'insereix en cada canvi de capa abans d'aixecar z" msgid "Bottom shell layers" @@ -9843,7 +11518,7 @@ msgstr "Capes de la carcassa inferior" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Aquest és el nombre de capes sòlides de la carcassa inferior, inclosa la " "capa superficial inferior. Quan el gruix calculat per aquest valor sigui més " @@ -9857,8 +11532,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "El nombre de capes sòlides inferiors s'incrementa en laminar si el gruix " "calculat per les capes inferiors de la carcassa és més prim que aquest " @@ -9871,25 +11546,59 @@ msgid "Apply gap fill" msgstr "Aplicar farciment de buits" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Habilita farciment de buits per a les superfícies seleccionades. El mínim " -"del forat que s'omplirà es pot controlar des de l'opció filtrar forats " -"petits a continuació.\n" +"Activa l'emplenament de buits per a les superfícies sòlides seleccionades. " +"La longitud mínima de l'espai que s'omplirà es pot controlar des de l'opció " +"de filtrar petits buits a continuació.\n" "\n" "Opcions:\n" -"1. A tot arreu: aplica farciment de buits a superfícies sòlides superiors, " -"inferiors i internes\n" -"2. Superfícies superiors i inferiors: aplica farciment de buit només a " -"superfícies superiors i inferiors\n" -"3. Enlloc: desactiva el farciment de buits\n" +"1. A tot arreu: aplica el farciment de buits a les superfícies sòlides " +"superiors, inferiors i internes per obtenir la màxima resistència\n" +"2. Superfícies superior i inferior: aplica l'ompliment de buits només a les " +"superfícies superior i inferior, equilibrant la velocitat d'impressió, " +"reduint el potencial d'extrusió al farciment sòlid i assegurant-se que les " +"superfícies superior i inferior no tinguin buits de forats\n" +"3. Enlloc: desactiva l'ompliment de buits per a totes les àrees de farciment " +"sòlides.\n" +"\n" +"Tingueu en compte que si s'utilitza el generador de perímetre clàssic, també " +"es pot generar un buit entre perímetres, si una línia d'amplada completa no " +"pot cabre entre ells. Aquest espai perimetral no està controlat per aquesta " +"configuració.\n" +"\n" +"Si voleu eliminar tots els buits, inclòs el clàssic generat pel perímetre, " +"definiu el valor dels buits petits en un nombre gran, com ara 999999.\n" +"\n" +"Tanmateix, això no s'aconsella, ja que l'ompliment de buits entre perímetres " +"contribueix a la força del model. Per als models on es genera un farciment " +"excessiu entre perímetres, una millor opció seria canviar al generador de " +"parets d'aracne i utilitzar aquesta opció per controlar si es genera el " +"farciment cosmètic de la superfície superior i inferior" msgid "Everywhere" msgstr "A tot arreu" @@ -9900,74 +11609,156 @@ msgstr "Superfícies superior i inferior" msgid "Nowhere" msgstr "Enlloc" -msgid "Force cooling for overhang and bridge" -msgstr "Força la refrigeració per voladís i pont" +msgid "Force cooling for overhangs and bridges" +msgstr "Refrigeració forçada per a voladissos i ponts" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Activeu aquesta opció per optimitzar la velocitat del ventilador de " -"refrigeració de peces per a Voladís i Pont i obtenir una millor refrigeració" +"Habiliteu aquesta opció per permetre l'ajust de la velocitat del ventilador " +"de refrigeració de les peces específicament per a voladissos, ponts interns " +"i externs. La configuració de la velocitat del ventilador específicament per " +"a aquestes funcions pot millorar la qualitat d'impressió general i reduir la " +"deformació." -msgid "Fan speed for overhang" -msgstr "Velocitat del ventilador per voladís" +msgid "Overhangs and external bridges fan speed" +msgstr "Velocitat del ventilador de voladissos i ponts externs" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Forçar el ventilador de refrigeració de la peça a tenir aquesta velocitat " -"quan imprimeix un pont o un perímetre voladís que tingui un gran grau de " -"voladís. Forçar la refrigeració per voladís i pont pot millorar la qualitat " -"de les peces" +"Utilitzeu aquesta velocitat del ventilador de refrigeració de la part quan " +"imprimiu ponts o parets en voladís amb un llindar de volada que superi el " +"valor establert al paràmetre \"Llindar de refrigeració voladissos\" " +"anterior. Augmentar la refrigeració específicament per a voladissos i ponts " +"pot millorar la qualitat d'impressió general d'aquestes funcions.\n" +"\n" +"Tingueu en compte que aquesta velocitat del ventilador està subjecta a " +"l'extrem inferior pel llindar de velocitat mínima del ventilador establert " +"més amunt. També s'ajusta cap amunt fins al llindar màxim de velocitat del " +"ventilador quan no es compleix el llindar mínim de temps de capa." -msgid "Cooling overhang threshold" -msgstr "Llindar de voladís de refrigeració" +msgid "Overhang cooling activation threshold" +msgstr "Llindar d'activació de refrigeració en volada" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Força el ventilador de refrigeració a una velocitat específica quan el grau " -"de voladís de la peça impresa excedeix aquest valor. Expressat com a " -"percentatge, indica l'amplada de la línia sense suport de la capa inferior. " -"0%% significa forçar la refrigeració de tot el perímetre exterior sense " -"importar el grau de voladís" +"Quan el voladís superi aquest llindar especificat, força el ventilador de " +"refrigeració a funcionar a la \"Velocitat del ventilador voladís\" que " +"s'estableix a continuació. Aquest llindar s'expressa com a percentatge, que " +"indica la part de l'amplada de cada línia que no és compatible amb la capa " +"que hi ha sota. L'establiment d'aquest valor a 0% for fa que el ventilador " +"de refrigeració funcioni per a totes les parets exteriors, independentment " +"del grau de volada." -msgid "Bridge infill direction" -msgstr "Angle del farciment del pont" +msgid "External bridge infill direction" +msgstr "Direcció d'ompliment del pont exterior" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Sobreescriptura de l'angle de pont. Si es deixa a zero, l'angle de pont es " "calcularà automàticament. En cas contrari, l'angle proporcionat s'utilitzarà " "per als ponts externs. Utilitzeu 180° per a l'angle zero." -msgid "Bridge density" -msgstr "Densitat del pont" +msgid "Internal bridge infill direction" +msgstr "Direcció d'ompliment del pont intern" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Densitat dels ponts exteriors. 100% significa pont sòlid. Per defecte és del " -"100%." +"Anulació de l'angle de pont intern. Si es deixa a zero, l'angle de pont es " +"calcularà automàticament. En cas contrari, s'utilitzarà l'angle proporcionat " +"per als ponts interns. Utilitzeu 180 ° per a un angle zero.\n" +"\n" +"Es recomana deixar-lo a 0 tret que hi hagi un model específic que no cal." + +msgid "External bridge density" +msgstr "Densitat del pont exterior" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Controla la densitat (espaiat) de les línies de pont externs. 100% significa " +"pont sòlid. El valor predeterminat és 100%.\n" +"\n" +"Els ponts externs de menor densitat poden ajudar a millorar la fiabilitat, " +"ja que hi ha més espai perquè l'aire circuli al voltant del pont extruït, " +"millorant la seva velocitat de refrigeració." + +msgid "Internal bridge density" +msgstr "Densitat del pont intern" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Controla la densitat (espaiat) de les línies de pont intern. 100% significa " +"pont sòlid. El valor predeterminat és 100%.\n" +"\n" +" Els ponts interns de menor densitat poden ajudar a reduir el coixí de la " +"superfície superior i millorar la fiabilitat del pont intern, ja que hi ha " +"més espai perquè l'aire circuli al voltant del pont extruït, millorant la " +"seva velocitat de refrigeració.\n" +"\n" +"Aquesta opció funciona especialment bé quan es combina amb la segona opció " +"de pont intern sobre farciment, millorant encara més l'estructura de pont " +"intern abans que s'extrueixi l'ompliment sòlid." msgid "Bridge flow ratio" msgstr "Ratio de flux del pont" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Disminuïu lleugerament aquest valor ( per exemple 0,9 ) per reduir la " -"quantitat de material per al pont, per millorar l'enfonsament" +"Redueix lleugerament aquest valor (per exemple, a 0,9) per disminuir la " +"quantitat de material utilitzat en els ponts i millorar la caiguda.\n" +"\n" +"El flux real per al pont es calcula multiplicant aquest valor amb la relació " +"de flux del filament i, si està establert, amb la relació de flux de " +"l'objecte." msgid "Internal bridge flow ratio" msgstr "Ratio de flux del pont intern" @@ -9975,51 +11766,167 @@ msgstr "Ratio de flux del pont intern" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" "Aquest valor regeix el gruix de la capa de pont intern. Aquesta és la " "primera capa sobre el farciment poc dens. Disminuïu lleugerament aquest " "valor ( per exemple 0,9 ) per millorar la qualitat de la superfície sobre el " -"farciment poc dens." +"farciment poc dens.\n" +"\n" +"El flux real intern dels ponts s'utilitza calculant la multiplicació " +"d'aquest valor amb la relació de flux dels ponts, la relació de flux del " +"filament i, si està configurada, la relació de flux de l'objecte." msgid "Top surface flow ratio" msgstr "Ratio de flux superficial superior" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Aquest factor afecta la quantitat de material per al farciment sòlid " "superior. Podeu disminuir-lo lleugerament per tenir un acabat superficial " -"suau" +"suau.\n" +"\n" +"El flux real de la superfície superior s'utilitza calculant la multiplicació " +"d'aquest valor amb la relació de flux del filament i, si està configurada, " +"la relació de flux de l'objecte." msgid "Bottom surface flow ratio" msgstr "Ratio de flux superficial inferior" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Aquest factor afecta la quantitat de material per al farciment sòlid del " +"fons.\n" +"\n" +"El cabal de farciment sòlid inferior real utilitzat es calcula multiplicant " +"aquest valor per la relació de flux de filament i, si s'estableix, la " +"relació de flux de l'objecte." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Aquest factor afecta la quantitat de material per al farciment sòlid inferior" msgid "Precise wall" msgstr "Perímetre precís" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Millora la precisió de la carcassa ajustant l'espaiat del perímetre més " -"exterior. Això també millora la consistència de la capa.\n" -"Nota: Aquest paràmetre només tindrà efecte si la seqüència de paret està " -"configurada a Interior-Exterior" msgid "Only one wall on top surfaces" msgstr "Només un perímetre a les superfícies superiors" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Utilitzeu només un perímetre a la superfície superior plana per donar més " "espai al patró de farciment superior" @@ -10053,7 +11960,7 @@ msgstr "Només un perímetre a la primera capa" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Utilitzeu només una perímetre a la primera capa per donar més espai al patró " "de farciment inferior" @@ -10063,12 +11970,12 @@ msgstr "Perímetres addicionals en voladissos ( Experimental )" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Crear camins perimetrals addicionals sobre voladissos pronunciats i zones on " -"no es poden ancorar ponts. " +"Crear camins perimetrals addicionals sobre voladissos escarpats i zones on " +"no es puguin ancorar ponts." -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "Invertir en capes senars" msgid "Overhang reversal" @@ -10076,24 +11983,24 @@ msgstr "Inversió del voladís" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Extruir perímetres que tenen una part sobre un voladís en sentit invers en " -"capes senars. Aquest patró alternatiu pot millorar dràsticament els " -"voladissos pronunciats.\n" +"Extrudir els perímetres que tenen una part sobre un voladís en la direcció " +"inversa en les capes parells. Aquest patró alternatiu pot millorar " +"dràsticament els voladissos pronunciats.\n" "\n" -"Aquest ajustament també pot ajudar a reduir la deformació( warping ) de " -"peces a causa de la reducció de les tensions a les parets de la peça." +"Aquesta configuració també pot ajudar a reduir la deformació de la peça en " +"disminuir les tensions a les parets de la peça." msgid "Reverse only internal perimeters" msgstr "Invertir només els perímetres interns" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10102,23 +12009,23 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Aplicar la lògica dels perímetres inversos només sobre perímetres interns. \n" +"Aplica la lògica de perímetres inversos només en els perímetres interns.\n" "\n" -"Aquest ajustament redueix considerablement les tensions de les peces, ja que " -"ara es distribueixen en direccions alternes. Això hauria de reduir la " -"deformació( warping ) de peces alhora que manté la qualitat de la paret " -"externa. Aquesta característica pot ser molt útil per a material propens al " -"warping, com ABS / ASA, i també per a filaments elàstics, com TPU i Silk " -"PLA. També pot ajudar a reduir la deformació( warping ) de les regions " -"flotants sobre els suports.\n" +"Aquesta configuració redueix considerablement les tensions de la peça, ja " +"que ara es distribueixen en direccions alternes. Això hauria de reduir la " +"deformació de la peça tot mantenint la qualitat de les parets externes. " +"Aquesta funció pot ser molt útil per a materials propensos a deformar-se, " +"com ABS/ASA, i també per a filaments elàstics, com TPU i PLA Seda. També pot " +"ajudar a reduir la deformació en regions flotants sobre suports.\n" "\n" -"Perquè aquest ajustament sigui més efectiu, es recomana establir el llindar " -"invers a 0 de manera que totes els perímetres interns s'imprimeixin en " -"direccions alternes en capes senars, independentment del seu grau de voladís." +"Perquè aquesta configuració sigui més efectiva, es recomana establir el " +"llindar invers a 0 perquè totes les parets internes s'imprimeixin en " +"direccions alternes en capes parells, independentment del seu grau de " +"voladís." msgid "Bridge counterbore holes" msgstr "Pont pels forats esbocats( contraforats )" @@ -10126,9 +12033,9 @@ msgstr "Pont pels forats esbocats( contraforats )" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Aquesta opció crea ponts per a forats de contraforat, permetent imprimir-los " "sense suport. Els modes disponibles son els següents:\n" @@ -10152,22 +12059,21 @@ msgstr "Llindar d'inversió en voladís" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" "Nombre de mm que ha de tenir el voladís perquè la inversió es consideri " -"útil. Pot ser un % o de l'amplada perimetral.\n" -"El valor 0 permet la inversió en totes les capes senars independentment." - -msgid "Classic mode" -msgstr "Mode clàssic" - -msgid "Enable this option to use classic mode" -msgstr "Activeu aquesta opció per utilitzar el mode clàssic" +"útil. Pot ser un % de l'amplada del perímetre.\n" +"El valor 0 permet la inversió a totes les capes parelles independentment.\n" +"Quan l'opció \"Detecta paret en voladís\" no està activada, aquesta opció " +"s'ignora i es produeix la reversió a totes les capes parelles " +"independentment." msgid "Slow down for overhang" msgstr "Alentir la velocitat als voladissos" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Activeu aquesta opció per alentir la impressió per a diferents graus de " "voladís" @@ -10175,39 +12081,79 @@ msgstr "" msgid "Slow down for curled perimeters" msgstr "Alentir la velocitat per a perímetres corbats" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Activeu aquesta opció per alentir la impressió en zones on potencialment " -"poden existir perímetres corbats" +"Activa aquesta opció per reduir la velocitat d'impressió en zones on els " +"perímetres poden haver-se corbat cap amunt. Per exemple, es reduirà més la " +"velocitat en imprimir voladissos en cantonades pronunciades, com la part " +"frontal del casc del Benchy, reduint així la curvatura que s'acumula en " +"múltiples capes.\n" +"\n" +"En general, es recomana tenir aquesta opció activada, tret que el sistema de " +"refredament de la teva impressora sigui prou potent o la velocitat " +"d'impressió prou baixa com perquè els perímetres no es corbin. Si " +"imprimeixes amb una velocitat de perímetre externa alta, aquest paràmetre " +"pot introduir lleugers artefactes en reduir la velocitat a causa de la gran " +"variació en les velocitats d'impressió. Si notes artefactes, assegura't que " +"el paràmetre de compensació de pressió estigui correctament ajustat.\n" +"\n" +"Nota: Quan aquesta opció està activada, els perímetres del voladís es " +"tracten com a voladissos, és a dir, s'aplica la velocitat de voladís fins i " +"tot si el perímetre de voladís forma part d'un pont. Per exemple, quan els " +"perímetres estan 100% en voladís, sense cap paret que els suporti des de " +"sota, s'aplicarà la velocitat del 100% del voladís." msgid "mm/s or %" msgstr "mm/s o %" -msgid "External" -msgstr "Extern" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Velocitat per a ponts i perímetres completament en voladís" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Velocitat de les extrusions del pont visibles externament.\n" +"\n" +"A més, si l'opció de Reduir la velocitat per als perímetres corbats està " +"desactivada o el mode clàssic de voladís està activat, aquesta serà la " +"velocitat d'impressió per a les parets de voladís que estan suportades per " +"menys del 13%, ja sigui que formin part d'un pont o d'un voladís." msgid "Internal" msgstr "Intern" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Velocitat del pont intern. Si el valor s'expressa en percentatge, es " -"calcularà a partir de la bridge_speed. El valor predeterminat és del 150%." +"Velocitat dels ponts interns. Si el valor s'expressa com un percentatge, es " +"calcularà en funció de la velocitat del pont (bridge_speed). El valor per " +"defecte és del 150%." msgid "Brim width" msgstr "Ample de la Vora d'Adherència" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Distància del model a la línia de la Vora d'Adherència més exterior" msgid "Brim type" @@ -10215,18 +12161,18 @@ msgstr "Tipus de Vora d'Adherència" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"Això controla la generació de la Vora d'Adherència a la cara exterior i/o " -"interior dels models. Auto significa que l'amplada de la Vora d'Adherència " -"s'analitza i es calcula automàticament." +"Això controla la generació de la vora d'adherència al costat extern i/o " +"intern dels models. 'Automàtic' vol dir que l'amplada de la vora " +"d'adherència s'analitza i es calcula automàticament." msgid "Brim-object gap" msgstr "Espai entre la Vora d'Adherència i l'objecte" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Un espai entre la línia de la Vora d'Adherència més interna i l'objecte pot " "fer que la Vora d'Adherència s'elimini més fàcilment" @@ -10242,12 +12188,12 @@ msgid "Brim ear max angle" msgstr "Angle màxim de l'orella" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Angle màxim per deixar aparèixer una orella. \n" -"Si s'estableix en 0, no es crearà cap Vora d'Adherència. \n" +"Angle màxim per deixar aparèixer una orella.\n" +"Si s'estableix en 0, no es crearà cap Vora d'Adherència.\n" "Si s'estableix a ~ 180, es crearà Vora d'Adherència arreu menys en seccions " "rectes." @@ -10255,30 +12201,45 @@ msgid "Brim ear detection radius" msgstr "Radi de detecció de l'orella" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -"La geometria serà reduïda abans de detectar angles aguts. Aquest paràmetre " -"especifica la longitud mínima de la desviació per a la reducció.\n" +"La geometria es simplificarà abans de detectar angles pronunciats. Aquest " +"paràmetre indica la longitud mínima de la desviació per a la simplificació.\n" "0 per desactivar" -msgid "Compatible machine" -msgstr "Màquina compatible" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "màquina compatible ascendent" -msgid "Compatible machine condition" -msgstr "Condició de màquina compatible" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Perfils de processos compatibles" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Una expressió booleana fent servir valors de configuració d'un perfil " +"existent. Si aquesta expressió és certa, el perfil es considera compatible " +"amb el perfil d'impressió actiu." -msgid "Compatible process profiles condition" -msgstr "Condició de perfils de procés compatibles" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Una expressió booleana que utilitza els paràmetres de configuració d'un " +"perfil d'impressió actiu. Si aquesta expressió s'avalua com a certa, aquest " +"perfil es considera compatible amb el perfil d'impressió actiu." + +msgid "Print sequence, layer by layer or object by object." msgstr "Seqüència d'impressió, capa per capa o objecte per objecte" msgid "By layer" @@ -10290,7 +12251,7 @@ msgstr "Objecte" msgid "Intra-layer order" msgstr "Ordre intracapa" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "Ordre d'impressió dins d'una sola capa" msgid "As object list" @@ -10304,7 +12265,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Activeu aquesta opció per reduir la velocitat d'impressió perquè el temps de " "la capa final no sigui inferior al llindar de temps de capa a \"Llindar " @@ -10317,25 +12278,22 @@ msgstr "Impressió normal" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "L'acceleració predeterminada tant de la impressió normal com dels viatges " "excepte a la capa inicial" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Perfil de filament predeterminat" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" "Perfil de filament predeterminat quan canvieu a aquest perfil de màquina" msgid "Default process profile" msgstr "Perfil de procés predeterminat" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Perfil de procés predeterminat quan canvieu a aquest perfil de màquina" msgid "Activate air filtration" @@ -10350,21 +12308,21 @@ msgid "Fan speed" msgstr "Velocitat del ventilador" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Velocitat del ventilador d'extracció durant la impressió. Aquesta velocitat " -"sobreescriurà la velocitat del Codi-G personalitzat del filament" +"sobreescriurà la velocitat del Codi-G personalitzat del filament." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Velocitat del ventilador d'extracció després de completar la impressió" msgid "No cooling for the first" msgstr "Sense refrigeració per a les primeres" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Apagar tots el ventiladors de refrigeració per a les primeres capes. El " "ventilador de refrigeració de la primera capa ha d'estar apagat per obtenir " @@ -10374,15 +12332,15 @@ msgid "Don't support bridges" msgstr "No suportar ponts" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "No posar suports a tot el pont, reduint la quantitat de suports necessaris. " "Els ponts normalment es poden imprimir directament sense suports si no són " "molt llargs" -msgid "Thick bridges" -msgstr "Ponts gruixuts" +msgid "Thick external bridges" +msgstr "Ponts exteriors gruixuts" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10405,70 +12363,139 @@ msgstr "" "recomana tenir activada aquesta funció. Tanmateix, penseu a desactivar-lo si " "utilitzeu broquets grans." -msgid "Don't filter out small internal bridges (beta)" -msgstr "No filtrar els petits ponts interns ( beta )" +msgid "Extra bridge layers (beta)" +msgstr "Capes de pont addicionals (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Aquesta opció pot ajudar a reduir la formació de forats a les superfícies " -"superiors en models molt inclinats o corbats.\n" +"Aquesta opció permet la generació d'una capa de pont addicional sobre ponts " +"interns i/o externs.\n" "\n" -"Per defecte, es filtren petits ponts interns i el farciment sòlid intern " -"s'imprimeix directament sobre el farciment poc dens. Això funciona bé en la " -"majoria dels casos, accelerant la impressió sense comprometre massa la " -"qualitat superior de la superfície. \n" +"Les capes de pont addicionals ajuden a millorar l'aspecte i la fiabilitat " +"del pont, ja que el farciment sòlid està millor suportat. Això és " +"especialment útil en impressores ràpides, on el pont i la velocitat " +"d'ompliment sòlid varien molt. La capa de pont addicional es tradueix en una " +"reducció de coixins a les superfícies superiors, així com una separació " +"reduïda de la capa de pont externa dels seus perímetres circumdants.\n" "\n" -"No obstant això, en models molt inclinats o corbats, especialment on " -"s'utilitza una densitat de farciment massa baixa i escassa, això pot " -"resultar en l'enrotllament del farciment sòlid no suportat, causant formació " -"de forats\n" +"En general, es recomana establir això com a mínim com a \"Només pont extern" +"\", tret que es detectin problemes específics amb el model en rodanxes.\n" "\n" -"Si activeu aquesta opció, s'imprimirà la capa de pont intern sobre un " -"farciment sòlid intern lleugerament sense suport. Les opcions següents " -"controlen la quantitat de filtratge, és a dir, la quantitat de ponts interns " -"creats.\n" -"\n" -"Desactivat: desactiva aquesta opció. Aquest és el comportament predeterminat " -"i funciona bé en la majoria dels casos.\n" -"\n" -"Filtratge limitat: crea ponts interns en superfícies molt inclinades, alhora " -"que evita crear ponts interns innecessaris. Això funciona bé per als models " -"més difícils.\n" -"\n" -"Sense filtratge: crea ponts interns sobre tots els voladissos interns " -"potencials. Aquesta opció és útil per a models de superfície superior molt " -"inclinats. No obstant això, en la majoria dels casos crea massa ponts " -"innecessaris." +"Opcions:\n" +"1. Desactivat: no genera segones capes de pont. Aquest és el valor " +"predeterminat i està establert per a finalitats de compatibilitat.\n" +"2. Només pont extern: genera segones capes de pont només per a ponts " +"exteriors. Tingueu en compte que els ponts petits que siguin més curts o més " +"estrets que el nombre de perímetres establert es saltaran, ja que no es " +"beneficiaran d'una segona capa de pont. Si es genera, la segona capa de pont " +"s'extrudrà paral·lelament a la primera capa de pont per reforçar la " +"resistència del pont.\n" +"3. Només pont intern: genera segones capes de pont per als ponts interns " +"només amb un farcit escàs. Tingueu en compte que els ponts interns compten " +"per al recompte de la capa superior del vostre model. La segona capa de pont " +"intern s'extrudrà el més perpendicular possible a la primera. Si hi ha " +"diverses regions a la mateixa illa, amb diferents angles de pont, es " +"seleccionarà l'última regió d'aquesta illa com a referència d'angle.\n" +"4. Aplicar a tots: genera segones capes de pont per als ponts interiors i " +"exteriors\n" msgid "Disabled" msgstr "Deshabilitat" +msgid "External bridge only" +msgstr "Només pont exterior" + +msgid "Internal bridge only" +msgstr "Només pont interior" + +msgid "Apply to all" +msgstr "Aplicar a tots" + +msgid "Filter out small internal bridges" +msgstr "Filtreu petits ponts interns" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Aquesta opció pot ajudar a reduir el coixí a les superfícies superiors en " +"models molt inclinats o corbats.\n" +"\n" +"Per defecte, els ponts interns petits es filtren i el farciment sòlid intern " +"s'imprimeix directament sobre el farciment escàs. Això funciona bé en la " +"majoria dels casos, accelerant la impressió sense comprometre massa la " +"qualitat de la superfície superior.\n" +"\n" +"Tanmateix, en models molt inclinats o corbats, especialment quan s'utilitza " +"una densitat de farciment escassa massa baixa, això pot provocar " +"l'enrotllament de l'ompliment sòlid no suportat, provocant un coixí.\n" +"\n" +"Si activeu el filtratge limitat o no es fa cap filtratge, s'imprimirà la " +"capa de pont interna sobre un farciment sòlid intern lleugerament " +"incompatible. Les opcions següents controlen la sensibilitat del filtratge, " +"és a dir, controlen on es creen els ponts interns.\n" +"\n" +"1. Filtre: activa aquesta opció. Aquest és el comportament predeterminat i " +"funciona bé en la majoria dels casos.\n" +"\n" +"2. Filtrat limitat: crea ponts interns en superfícies molt inclinades alhora " +"que s'evita ponts innecessaris. Això funciona bé per a la majoria de models " +"difícils.\n" +"\n" +"3. Sense filtres: crea ponts interns a cada voladí intern potencial. Aquesta " +"opció és útil per als models de superfícies superiors molt inclinades; " +"tanmateix, en la majoria dels casos, crea massa ponts innecessaris." + msgid "Limited filtering" msgstr "Filtratge limitat" @@ -10490,20 +12517,20 @@ msgstr "" msgid "End G-code" msgstr "Codi-G Final" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Codi-G Final en acabar tota la impressió" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Codi-G entre Objectes" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Inserir Codi-G entre objectes. Aquest paràmetre només s'aplicarà quan " -"imprimiu els models objecte per objecte" +"imprimiu els models objecte per objecte." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Codi-G Final en acabar la impressió d'aquest filament" msgid "Ensure vertical shell thickness" @@ -10537,24 +12564,24 @@ msgstr "Moderat" msgid "Top surface pattern" msgstr "Patró de superfície superior" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Patró de línia del farciment de la superfície superior" -msgid "Concentric" -msgstr "Concèntric" - -msgid "Rectilinear" -msgstr "Rectilini" - msgid "Monotonic" msgstr "Monotònic" msgid "Monotonic line" msgstr "Línia mononotònica" +msgid "Rectilinear" +msgstr "Rectilini" + msgid "Aligned Rectilinear" msgstr "Alineat Rectilini" +msgid "Concentric" +msgstr "Concèntric" + msgid "Hilbert Curve" msgstr "Corba de Hilbert" @@ -10567,7 +12594,7 @@ msgstr "Octograma en Espiral" msgid "Bottom surface pattern" msgstr "Patró de superfície inferior" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" "Patró de línia del farciment de la superfície inferior, no del farciment de " "pont" @@ -10616,7 +12643,7 @@ msgid "Small perimeters threshold" msgstr "Llindar de perímetres petits" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Això estableix el llindar per a la longitud perimetral petita. El llindar " "predeterminat és de 0mm" @@ -10625,10 +12652,10 @@ msgid "Walls printing order" msgstr "Ordre d'impressió de perímetres" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10638,42 +12665,38 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Seqüència d'impressió dels perímetres interns ( interior ) i externs " -"( exterior ). \n" +"Seqüència d'impressió de les parets interiors (interiors) i exteriors " +"(exteriors).\n" "\n" -"Utilitzeu Interior/Exterior per obtenir els millors voladissos. Això es deu " -"al fet que els perímetres voladissos poden adherir-se a un perímetre proper " -"durant la impressió. No obstant això, aquesta opció es tradueix en una " -"qualitat superficial lleugerament reduïda, ja que el perímetre exterior es " -"deforma en ser aixafat contra el perímetre intern.\n" +"Utilitzeu Interior / Exterior per a millors voladissos. Això es deu al fet " +"que les parets que sobresurten poden adherir-se a un perímetre veí durant la " +"impressió. No obstant això, aquesta opció resulta en una qualitat " +"superficial lleugerament reduïda, ja que el perímetre extern es deforma en " +"ser aixafat al perímetre intern.\n" "\n" -"Utilitzeu Interior/Exterior/Interior per obtenir el millor acabat " -"superficial extern i precisió dimensional, ja que el perímetre extern " -"s'imprimeix sense problemes des d'un perímetre intern. No obstant això, el " -"rendiment del voladís es reduirà, ja que no hi ha cap perímetre intern " -"contra el qual imprimir el perímetre exterior. Aquesta opció requereix un " -"mínim de 3 perímetres per ser efectiva ja que imprimeix primer els " -"perímetres interiors a partir del 3r perímetre, després el perímetre " -"exterior i, finalment, el primer perímetre intern. Aquesta opció es recomana " -"contra l'opció Exterior/Interior en la majoria dels casos. \n" +"Utilitzeu Interior / Exterior / Interior per obtenir el millor acabat de la " +"superfície externa i precisió dimensional, ja que la paret externa " +"s'imprimeix sense molèsties des d'un perímetre intern. Tanmateix, el " +"rendiment del voladís es reduirà, ja que no hi ha un perímetre intern per " +"imprimir la paret externa. Aquesta opció requereix un mínim de 3 parets per " +"ser efectiva, ja que imprimeix primer les parets interiors a partir del 3r\n" +" perímetre, després el perímetre extern i, finalment, el primer perímetre " +"intern. Aquesta opció es recomana contra l'opció Exterior/Interior en la " +"majoria dels casos.\n" "\n" -"Utilitzeu Exterior/Interior per obtenir els mateixos avantatges de qualitat " -"de paret externa i precisió dimensional de l'opció Interior/Exterior/" -"Interior. No obstant això, les costures z semblaran menys consistents a " -"mesura que la primera extrusió d'una nova capa comenci en una superfície " -"visible.\n" -"\n" -" " +"Utilitzeu Exterior / Interior per obtenir la mateixa qualitat de paret " +"externa i els mateixos avantatges de precisió dimensional de l'opció " +"Interior / Exterior / Interior. Tanmateix, les costures z semblaran menys " +"consistents a mesura que comenci la primera extrusió d'una nova capa en una " +"superfície visible." msgid "Inner/Outer" msgstr "Interior/Exterior" @@ -10692,20 +12715,20 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" -"Ordre de perímetre/farciment. Quan es desmarca la casella, primer " -"s'imprimeixen els perímetres, cosa que funciona millor en la majoria dels " +"Ordre de paret/farciment. Quan la casella no està seleccionada, primer " +"s'imprimeixen les parets, cosa que funciona millor en la majoria dels " "casos.\n" "\n" -"Imprimir el farciment primer pot ajudar amb voladissos extrems, ja que els " -"perímetres tenen el farciment veí per adherir-s'hi. Tanmateix, el farciment " -"empenyerà lleugerament les parets impreses on s'uneix, cosa que provocarà un " -"pitjor acabat superficial extern. També pot fer que el farciment ressalti a " -"través de les superfícies externes de la peça." +"Imprimir primer el farciment pot ajudar en voladissos extrems, ja que les " +"parets tenen el farciment veí per adherir-s'hi. No obstant això, el " +"farciment empenyerà lleugerament les parets impreses allà on s'hi uneix, " +"resultant en un acabat superficial extern pitjor. També pot fer que el " +"farciment es faci visible a través de les superfícies externes de la peça." msgid "Wall loop direction" msgstr "Direcció del bucle de perímetre" @@ -10715,20 +12738,20 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"La direcció en què s'extrudeixen els bucles de perímetre quan es mira cap " -"avall des de la part superior.\n" +"La direcció en la qual s'extrudeixen els bucles de paret quan es mira des de " +"dalt.\n" "\n" -"Per defecte, totes les parets s'extrudeixen en sentit contrari a les agulles " -"del rellotge, tret que \"Parets invertides en capes imparells\" estigui " -"habilitat. Triar una opció que no sigui Auto forçarà la direcció de la paret " -"malgrat s'habiliti \"Parets invertides en capes imparells\".\n" +"Per defecte, totes les parets s'extrudeixen en sentit antihorari, tret que " +"s'activi l'opció Invertir en capes parells. Configurar això a qualsevol " +"opció diferent d'Automàtic forçarà la direcció de la paret, independentment " +"de l'opció Invertir en capes parells.\n" "\n" -"Aquesta opció es desactivarà si el mode gerro en espiral està habilitat." +"Aquesta opció es desactivarà si està activat el mode espiral (vase mode)." msgid "Counter clockwise" msgstr "En sentit contrari a les agulles del rellotge" @@ -10836,10 +12859,13 @@ msgstr "" "Aquesta opció determina la distància addicional per la qual s'ha d'ampliar " "l'àrea de malla de llit adaptativa en les direccions XY." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Color de l'extrusor" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Només s'utilitza com a ajuda visual a la Interfície d'Usuari" msgid "Extruder offset" @@ -10849,31 +12875,189 @@ msgid "Flow ratio" msgstr "Relació de flux" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "El material pot tenir un canvi volumètric després de canviar entre estat fos " "i estat cristal·lí. Aquest ajustament canvia proporcionalment tot el flux " "d'extrusió d'aquest filament en Codi-G. L'interval de valors recomanat està " "entre 0,95 i 1,05. Potser podeu ajustar aquest valor per obtenir una " -"superfície ben plana quan hi ha un lleuger excés o dèficit de flux" +"superfície ben plana quan hi ha un lleuger excés o dèficit de flux." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"El material pot tenir un canvi volumètric després de canviar entre estat fos " +"i estat cristal·lí. Aquesta configuració canvia tot el flux d'extrusió " +"d'aquest filament en G-code proporcionalment. El rang de valors recomanat és " +"entre 0,95 i 1,05. Potser podeu ajustar aquest valor per obtenir una " +"superfície plana agradable quan hi ha un lleuger desbordament o " +"desbordament.\n" +"\n" +"La relació de flux d'objecte final és aquest valor multiplicat per la " +"relació de flux de filaments." msgid "Enable pressure advance" msgstr "Activar l'Avanç de Pressió Lineal" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Habilitar l'Avanç de Pressió Lineal, el resultat del calibratge automàtic se " +"Activeu l'avanç de pressió, el resultat de la calibració automàtica se " "sobreescriurà un cop activat." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Avanç de Pressió Lineal( Klipper ) AKA Factor d'Avanç Lineal( Marlin )" +msgid "Enable adaptive pressure advance (beta)" +msgstr "Activa l'avanç de pressió adaptativa (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Amb l'augment de les velocitats d'impressió (i, per tant, l'augment del flux " +"volumètric a través del broquet) i l'augment de les acceleracions, s'ha " +"observat que el valor PA efectiu normalment disminueix. Això vol dir que un " +"únic valor de PA no sempre és 100% oòptim per a totes les funcions i que " +"normalment s'utilitza un valor de compromís que no provoca massa " +"protuberància en funcions amb velocitats de flux i acceleracions més baixes, " +"alhora que no provoca llacunes en funcions més ràpides.\n" +"\n" +"Aquesta característica té com a objectiu abordar aquesta limitació modelant " +"la resposta del sistema d'extrusió de la impressora en funció de la " +"velocitat del flux volumètric i de l'acceleració amb què imprimeix. " +"Internament, genera un model ajustat que pot extrapolar l'avanç de pressió " +"necessari per a qualsevol velocitat i acceleració del flux volumètric " +"donats, que després s'emet a la impressora en funció de les condicions " +"d'impressió actuals.\n" +"\n" +"Quan està activat, el valor d'avanç de pressió anterior es substitueix. " +"Tanmateix, es recomana un valor predeterminat raonable anterior per actuar " +"com a alternativa i per al canvi d'eina.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Mesures d'avanç de pressió adaptativa (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Afegiu conjunts de valors d'avanç de pressió (PA), les velocitats de cabal " +"volumètric i les acceleracions a les quals es van mesurar, separats per una " +"coma. Un conjunt de valors per línia. Per exemple\n" +"0,04,3,96,3000\n" +"0,033,3,96,10000\n" +"0,029,7,91,3000\n" +"0,026,7,91,10000\n" +"\n" +"Com calibrar:\n" +"1. Executeu la prova d'avanç de pressió almenys 3 velocitats per valor " +"d'acceleració. Es recomana que la prova s'executi almenys a la velocitat " +"dels perímetres externs, la velocitat dels perímetres interns i la velocitat " +"d'impressió de les funcions més ràpida del vostre perfil (normalment és " +"l'ompliment escàs o sòlid). A continuació, executeu-los a les mateixes " +"velocitats per a les acceleracions d'impressió més lentes i ràpides, i no " +"més ràpid que l'acceleració màxima recomanada que proporciona el modelador " +"d'entrada Klipper.\n" +"2. Anoteu el valor de PA òptim per a cada velocitat i acceleració del cabal " +"volumètric. Podeu trobar el número de flux seleccionant el flux al " +"desplegable de l'esquema de colors i moveu el control lliscant horitzontal " +"per sobre de les línies del patró PA. El número ha de ser visible a la part " +"inferior de la pàgina. El valor de PA ideal hauria de ser decreixent com més " +"gran sigui el cabal volumètric. Si no és així, confirmeu que la vostra " +"extrusora funciona correctament. Com més lent i amb menys acceleració " +"imprimiu, més gran serà el rang de valors de PA acceptables. Si no hi ha cap " +"diferència visible, utilitzeu el valor PA de la prova més ràpida.\n" +"3. Introduïu els triplets dels valors de PA, flux i acceleracions al quadre " +"de text aquí i deseu el vostre perfil de filament." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Habilita l'avanç de pressió adaptativa per als voladissos (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Habiliteu PA adaptatiu per als voladissos, així com quan canvia el flux dins " +"de la mateixa característica. Aquesta és una opció experimental, ja que si " +"el perfil PA no es configura amb precisió, provocarà problemes d'uniformitat " +"a les superfícies externes abans i després dels voladissos.\n" + +msgid "Pressure advance for bridges" +msgstr "Avanç de pressió per als ponts" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Valor d'avanç de pressió per als ponts. Establiu a 0 per desactivar.\n" +"\n" +" Un valor de PA més baix quan s'imprimeixen ponts ajuda a reduir l'aparició " +"d'una lleugera extrusió immediatament després dels ponts. Això és causat per " +"la caiguda de pressió al broquet quan s'imprimeix a l'aire i un PA més baix " +"ajuda a contrarestar-ho." + msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." @@ -10885,38 +13069,36 @@ msgid "Keep fan always on" msgstr "Mantenir el ventilador sempre encès" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" -"Si activeu aquest ajustament, el ventilador de refrigeració de peces no " -"s'aturarà mai i funcionarà almenys a una velocitat mínima per reduir la " +"Si s'activa aquesta configuració, el ventilador de refrigeració de la part " +"mai s'aturarà i funcionarà almenys a la velocitat mínima per reduir la " "freqüència d'arrencada i aturada" msgid "Don't slow down outer walls" msgstr "No freneu a les parets exteriors" +#, fuzzy msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" -"Si està habilitada, aquesta configuració garantirà que els perímetres " -"externs no s'alenteixin per complir el temps mínim de capa. Això és " -"particularment útil en els escenaris següents:\n" -"\n" -"1. Per evitar canvis de brillantor en imprimir filaments brillants \n" -"2. Evitar canvis en la velocitat de la paret externa que poden crear " -"artefactes de paret lleugers que semblen bandes z \n" -"3. Evitar imprimir a velocitats que provoquen VFAs (artefactes fins) a les " -"parets externes\n" -"\n" +"Si s'activa, aquesta configuració garantirà que els perímetres externs no es " +"redueixin per complir el temps mínim de capa. Això és especialment útil en " +"els escenaris següents:\n" +"1. Per evitar canvis de brillantor en imprimir filaments brillants\n" +"2. Per evitar canvis en la velocitat de la paret externa que poden crear " +"lleugers artefactes de paret que semblen bandes z\n" +"3. Per evitar la impressió a velocitats que provoquen VFA (artefactes fins) " +"a les parets externes" msgid "Layer time" msgstr "Temps de capa" @@ -10924,7 +13106,7 @@ msgstr "Temps de capa" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "S'habilitarà el ventilador de refrigeració de peces per a capes el temps " "estimat de les quals sigui inferior a aquest valor. La velocitat del " @@ -10934,8 +13116,10 @@ msgstr "" msgid "Default color" msgstr "Color predeterminat" -msgid "Default filament color" -msgstr "Color del filament predeterminat" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Notes de filament" @@ -10953,47 +13137,110 @@ msgstr "" "HRC( duresa ) mínim de broquet necessari per imprimir el filament. Zero " "significa que no hi ha comprovació de l'HRC del broquet." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Aquest ajustament representa la quantitat de volum de filament que es pot " "fondre i extruir per segon. La velocitat d'impressió està limitada per la " "velocitat volumètrica màxima, en cas de configuració de velocitat massa alta " "i poc raonable. No pot ser zero" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Temps de càrrega del filament" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Temps per carregar nou filament quan canvia de filament. Només per a " -"estadístiques" +"És hora de carregar un filament nou quan canvieu de filament. Normalment " +"s'aplica a màquines multimaterial d'una sola extrusora. Per als canviadors " +"d'eines o màquines multieines, normalment és 0. Només per a estadístiques" msgid "Filament unload time" msgstr "Temps de descàrrega del filament" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Temps per descarregar filament vell en canviar de filament. Només per a " -"estadístiques" +"És hora de descarregar el filament vell quan canvieu el filament. Normalment " +"s'aplica a màquines multimaterial d'una sola extrusora. Per als canviadors " +"d'eines o màquines multieines, normalment és 0. Només per a estadístiques" + +msgid "Tool change time" +msgstr "Temps de canvi d'eina" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Temps necessari per canviar d'eina. Normalment s'aplica per a canviadors " +"d'eines o màquines multieina. Per a màquines multimaterial d'una sola " +"extrusora, normalment és 0. Només per a estadístiques" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "El diàmetre del filament s'utilitza per calcular l'extrusió en Codi-G, per " -"la qual cosa és important i ha de ser precís" +"la qual cosa és important i ha de ser precís." msgid "Pellet flow coefficient" msgstr "Coeficient de flux de pellets" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -11001,32 +13248,63 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -"El coeficient de flux de pellets es deriva empíricament i permet calcular el " -"volum per a impressores de pellets.\n" +"El coeficient de flux de pellets es deriva empíricament i permet el càlcul " +"de volum per a impressores de pellets.\n" "\n" -"Internament es converteix en filament_diameter. La resta de càlculs de volum " -"continuen sent els mateixos.\n" +"Internament es converteix a filament_diameter. Tots els altres càlculs de " +"volum segueixen sent els mateixos.\n" "\n" -"filament_diameter = m²( (4 * pellet_flow_coefficient) / PI )" +"diàmetre_filament = sqrt ((4 * coeficient_flux_pellet) / PI)" -msgid "Shrinkage" -msgstr "Encongiment" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Encongiment (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" "Introduïu el percentatge de contracció que obtindrà el filament després del " "refredament ( 94% i si mesureu 94mm en lloc de 100mm ). La peça s'escalarà " -"en xy per compensar. Només es té en compte el filament utilitzat per al " +"en XY per compensar. Només es té en compte el filament utilitzat per al " "perímetre.\n" "Assegureu-vos de deixar prou espai entre objectes, ja que aquesta " "compensació es fa després de les comprovacions." +msgid "Shrinkage (Z)" +msgstr "Encongiment (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Introduïu el percentatge de contracció que obtindrà el filament després de " +"refredar-se (94% isi mesureu 94 mm en lloc de 100 mm). La part s'escalarà en " +"Z per compensar." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Velocitat de càrrega" @@ -11043,7 +13321,7 @@ msgid "Unloading speed" msgstr "Velocitat de descàrrega" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Velocitat emprada per descarregar el filament a la Torre de Purga ( no " @@ -11063,8 +13341,8 @@ msgid "Delay after unloading" msgstr "Retard després de la descàrrega" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Temps d'espera després que el filament s'ha descarregat. Pot ajudar a " @@ -11081,6 +13359,25 @@ msgstr "" "El filament es refreda en ser mogut cap endavant i cap enrere als tubs de " "refredament. Especifica el nombre que vulgueu d'aquests moviments." +msgid "Stamping loading speed" +msgstr "Velocitat de càrrega d'estampació" + +msgid "Speed used for stamping." +msgstr "Velocitat utilitzada per estampar." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Distància d'estampació mesurada des del centre del tub de refrigeració" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Si s'estableix en un valor diferent de zero, el filament es mou cap al " +"broquet entre els moviments de refrigeració individuals (\"estampació\"). " +"Aquesta opció configura quant de temps hauria de durar aquest moviment abans " +"que el filament es torni a retreure." + msgid "Speed of the first cooling move" msgstr "Velocitat del primer moviment de refredament" @@ -11113,16 +13410,6 @@ msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" "Els moviments de refredament s'acceleren gradualment cap a aquesta velocitat." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Temps perquè el firmware de la impressora ( o la Unitat Multi Material 2.0 ) " -"carregui un filament durant un canvi d'eina ( en executar el Codi-T ). " -"Aquest temps s'afegeix al temps d'impressió total mitjançant l'estimador de " -"temps del Codi-G." - msgid "Ramming parameters" msgstr "Paràmetres de Moldejat de Punta( Ramming )" @@ -11133,43 +13420,32 @@ msgstr "" "RammingDialog processa aquesta cadena i conté paràmetres específics de " "Moldejat de Punta( Ramming )" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Temps perquè el firmware de la impressora ( o la Unitat Multi Material 2.0 ) " -"descarregui un filament durant un canvi d'eina ( en executar el Codi-T ). " -"Aquest temps s'afegeix al temps d'impressió total mitjançant l'estimador de " -"temps del Codi-G." - -msgid "Enable ramming for multitool setups" -msgstr "" -"Habilita el Moldejat de Punta( Ramming ) per a configuracions multieina" +msgid "Enable ramming for multi-tool setups" +msgstr "Habiliteu l'embat per a configuracions multieina" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -"Realitzar el Moldejat de Punta( Ramming ) quan s'utilitzi una impressora " -"multieina ( és a dir, quan el \"Multimaterial d'un sol extrusor\" a la " -"configuració de la impressora no està marcat ). Quan està marcat, " -"s'extrusionarà ràpidament una petita quantitat de filament a la Torre de " -"Purga just abans del canvi d'eina. Aquesta opció només s'utilitza quan la " -"Torre de Purga està habilitada." +"Realitzeu l'embolcall quan utilitzeu una impressora multieina (és a dir, " +"quan l'opció \"Multimaterial d'extrusora única\" a la configuració de la " +"impressora està desmarcada). Quan es comprova, una petita quantitat de " +"filament s'extrudeix ràpidament a la torre de neteja just abans del canvi " +"d'eina. Aquesta opció només s'utilitza quan la torre de neteja està " +"habilitada." -msgid "Multitool ramming volume" -msgstr "Volum de Moldejat de Punta( Ramming ) multieina" +msgid "Multi-tool ramming volume" +msgstr "Volum d'impacte multieina" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "El volum de Moldejat de Punta( Ramming ) abans del canvi d'eina." -msgid "Multitool ramming flow" -msgstr "Flux de Moldejat de Punta( Ramming ) multieina" +msgid "Multi-tool ramming flow" +msgstr "Flux d'embolcall multieina" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" "Flux utilitzat pel Moldejat de Punta( Ramming ) de filament abans del canvi " "d'eina." @@ -11177,49 +13453,61 @@ msgstr "" msgid "Density" msgstr "Densitat" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Densitat del filament. Només per a estadístiques" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "El tipus de material del filament" msgid "Soluble material" msgstr "Material soluble" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "El material soluble s'utilitza habitualment per imprimir interfície de " "suport i suport" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Material de suport" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "El material de suport s'utilitza habitualment per imprimir interfície de " "suport i suport" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Temperatura d'estovament" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" -"El material s'estova a aquesta temperatura, per la qual cosa quan la " -"temperatura del llit és igual o superior a ella, és molt recomanable obrir " -"la porta principal i/o treure el vidre superior per evitar obstruccions." +"El material s'estova a aquesta temperatura, de manera que quan la " +"temperatura del llit és igual o superior a aquesta, és molt recomanable " +"obrir la porta d'entrada i/o treure el vidre superior per evitar " +"l'obstrucció." msgid "Price" msgstr "Preu" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Preu del filament. Només per a estadístiques" msgid "money/kg" @@ -11228,7 +13516,7 @@ msgstr "diners/kg" msgid "Vendor" msgstr "Fabricant" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Fabricant del filament. Només per a mostrar" msgid "(Undefined)" @@ -11239,7 +13527,7 @@ msgstr "Direcció de farciment poc dens" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Angle per a un patró de farciment poc dens, que controla l'inici o la " "direcció principal de la línia" @@ -11249,57 +13537,80 @@ msgstr "Direcció de farciment sòlid" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Angle per al patró de farciment sòlid, que controla l'inici o la direcció " "principal de la línia" -msgid "Rotate solid infill direction" -msgstr "Rotar la direcció de farciment sòlid" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Rotar la direcció de farciment sòlid 90° per a cada capa." - msgid "Sparse infill density" msgstr "Densitat de farciment poc dens" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" "Densitat de farciment poc dens, converteix el 100% tu el teu farciment poc " "dens en farciment sòlid i s'utilitzarà el patró de farciment sòlid intern" +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" + msgid "Sparse infill pattern" msgstr "Patró farciment poc dens" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Patró de línia per al farciment poc dens" -msgid "Grid" -msgstr "Graella" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Lineal" -msgid "Cubic" -msgstr "Cúbic" +msgid "Grid" +msgstr "Graella" msgid "Tri-hexagon" msgstr "Tri-hexàgon" -msgid "Gyroid" -msgstr "Giroide" - -msgid "Honeycomb" -msgstr "Panal d'abella" +msgid "Cubic" +msgstr "Cúbic" msgid "Adaptive Cubic" msgstr "Cúbic adaptatiu" -msgid "3D Honeycomb" -msgstr "Panal d'abella 3D" +msgid "Quarter Cubic" +msgstr "Quart cúbic" msgid "Support Cubic" msgstr "Suport Cúbic" @@ -11307,9 +13618,57 @@ msgstr "Suport Cúbic" msgid "Lightning" msgstr "Llampec" +msgid "Honeycomb" +msgstr "Panal d'abella" + +msgid "3D Honeycomb" +msgstr "Panal d'abella 3D" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "Gelosia 2D" + msgid "Cross Hatch" msgstr "Quadrícula" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Giroide" + +msgid "Lateral lattice angle 1" +msgstr "Angle de gelosia 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"L'angle del primer conjunt d'elements de gelosia 2D en la direcció Z. El " +"zero és vertical." + +msgid "Lateral lattice angle 2" +msgstr "Angle de gelosia 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"L'angle del segon conjunt d'elements de gelosia 2D en la direcció Z. El zero " +"és vertical." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "Longitud d'ancoratge de farciment poc dens" @@ -11321,7 +13680,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11332,7 +13691,7 @@ msgstr "" "no es troba aquest segment perimetral més curt que infill_anchor_max, la " "línia de farciment es connecta a un segment perimetral a un sol costat i la " "longitud del segment perimetral pres es limita a aquest paràmetre, però no " -"més de anchor_length_max. \n" +"més de anchor_length_max.\n" "Establiu aquest paràmetre a zero per desactivar els perímetres d'ancoratge " "connectats a una sola línia de farciment." @@ -11353,7 +13712,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11364,30 +13723,30 @@ msgstr "" "no es troba aquest segment perimetral més curt que aquest paràmetre, la " "línia de farciment es connecta a un segment perimetral a un sol costat i la " "longitud del segment perimetral pres es limita a infill_anchor, però no més " -"llarga que aquest paràmetre. \n" +"llarga que aquest paràmetre.\n" "Si s'estableix a 0, s'utilitzarà l'algorisme antic per a la connexió de " "farciment, hauria de crear el mateix resultat que amb 1000 i 0." msgid "0 (Simple connect)" msgstr "0 ( Connexió simple )" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Acceleració en perímetres exteriors" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Acceleració en perímetres interiors" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Acceleració en desplaçaments" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Acceleració del farciment superficial superior. L'ús d'un valor inferior pot " "millorar la qualitat de la superfície superior" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Acceleració del perímetre exterior. L'ús d'un valor inferior pot millorar la " "qualitat" @@ -11420,7 +13779,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Acceleració de la capa inicial. L'ús d'un valor inferior pot millorar " "l'adherència de la placa d'impressió" @@ -11428,7 +13787,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Habilita accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "El max_accel_to_decel de Klipper s'ajustarà automàticament" msgid "accel_to_decel" @@ -11436,25 +13795,36 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "El max_accel_to_decel de Klipper s'ajustarà a aquest %% d'acceleració" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Sacsejada( Jerk ) de perímetres exteriors" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Sacsejada( Jerk ) de perímetres interiors" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Sacsejada( Jerk ) per a la superfície superior" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Sacsejada( Jerk ) per farciment" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Sacsejada( Jerk ) per a la capa inicial" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "Sacsejada( Jerk ) per deplaçament" msgid "" @@ -11469,24 +13839,24 @@ msgstr "Alçada de la capa inicial" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Alçada de la capa inicial. Fer que l'alçada inicial de la capa sigui " "lleugerament més gruixuda pot millorar l'adherència de la placa d'impressió" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Velocitat de la capa inicial excepte la part de farciment sòlid" msgid "Initial layer infill" msgstr "Farciment de la capa inicial" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Velocitat de farciment sòlid de la capa inicial" msgid "Initial layer travel speed" msgstr "Velocitat de desplaçament de la capa inicial" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "Velocitat de desplaçament de la capa inicial" msgid "Number of slow layers" @@ -11502,7 +13872,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Temperatura del broquet a la capa inicial" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" "Temperatura del broquet per imprimir la capa inicial quan s'utilitza aquest " "filament" @@ -11530,20 +13900,53 @@ msgid "Support interface fan speed" msgstr "Velocitat del ventilador a la interfície de suport" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"Aquesta velocitat del ventilador de refrigeració de la part s'aplica quan " +"s'imprimeixen interfícies de suport. L'establiment d'aquest paràmetre a una " +"velocitat superior a la normal redueix la força d'unió de la capa entre els " +"suports i la part suportada, fent-los més fàcils de separar.\n" +"Establiu a -1 per desactivar-lo.\n" +"Disable_fan_first_layers substitueix aquesta configuració." + +msgid "Internal bridges fan speed" +msgstr "Velocitat del ventilador dels ponts interns" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"La velocitat del ventilador de refrigeració de la part utilitzada per a tots " +"els ponts interns. Establiu a -1 per utilitzar la configuració de velocitat " +"del ventilador en voladís.\n" +"\n" +"La reducció de la velocitat del ventilador dels ponts interns, en comparació " +"amb la velocitat del ventilador habitual, pot ajudar a reduir la deformació " +"de les peces a causa del refredament excessiu aplicat sobre una superfície " +"gran durant un període de temps prolongat." + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"Aquesta velocitat del ventilador s'aplica durant totes les interfícies de " -"suport, per poder debilitar la seva unió amb una alta velocitat del " -"ventilador.\n" -"Definiu en -1 per desactivar aquesta sobreescriptura.\n" -"Només es pot anul·lar per disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Tremolor( Jitter ) Aleatori mentre imprimeix el perímetre, de manera que la " "superfície tingui un aspecte rugós. Aquest ajustament controla la posició " @@ -11562,18 +13965,18 @@ msgid "Fuzzy skin thickness" msgstr "Gruix de la Pell Difusa" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"L'amplada dins de la qual Tremolar( Jitter ). Es recomana que estigui per " -"sota de l'amplada de la línia del perímetre exterior" +"L'amplada dins de la qual es pot tremolar. Es recomana estar per sota de " +"l'amplada de la línia de la paret exterior" msgid "Fuzzy skin point distance" msgstr "Distància del punt de la Pell Difusa" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "La distància mitjana entre els punts aleatoris introduïts en cada segment de " "línia" @@ -11581,21 +13984,131 @@ msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "Aplicar Pell Difusa a la primera capa" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." msgstr "Si s'ha d'aplicar Pell Difusa a la primera capa" +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Combinat" + +msgid "Fuzzy skin noise type" +msgstr "Tipus de soroll de pell difusa" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Tipus de soroll per a la generació de pell difusa.\n" +"Clàssic: soroll aleatori uniforme clàssic.\n" +"Perlin: soroll Perlin, que dóna una textura més consistent.\n" +"Ballow: semblant al soroll de perlin, però més desordenat.\n" +"Ridged Multifractal: soroll crepuscular amb característiques agudes i " +"irregulars. Crea textures semblants al marbre.\n" +"Voronoi: divideix la superfície en cèl·lules voronoi i desplaça cadascuna en " +"una quantitat aleatòria. Crea una textura de mosaic." + +msgid "Classic" +msgstr "Clàssic" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Multifractal estriat" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Mida de la característica de la pell difusa" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"La mida base de les característiques de soroll coherent, en mm. Els valors " +"més alts donaran lloc a característiques més grans." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Octaves de soroll de pell difusa" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"El nombre d'octaves de soroll coherent a utilitzar. Els valors més alts " +"augmenten el detall del soroll, però també augmenten el temps de càlcul." + +msgid "Fuzzy skin noise persistence" +msgstr "Persistència del soroll de la pell difusa" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"La taxa de decadència per a les octaves més altes del soroll coherent. " +"Valors més baixos donaran lloc a un soroll més suau." + msgid "Filter out tiny gaps" msgstr "Filtrar els buits minúsculs" msgid "Layers and Perimeters" msgstr "Capes i Perímetres" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtrar els buits més petits que el llindar especificat" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"No imprimir l'ompliment de buits amb una longitud inferior al llindar " +"especificat (en mm). Aquesta configuració s'aplica a l'ompliment superior, " +"inferior i sòlid i, si s'utilitza el generador perimetral clàssic, a " +"l'ompliment de buits de paret." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Velocitat de farciment de buits. El buit sol tenir una amplada de línia " "irregular i s'ha d'imprimir més lentament" @@ -11604,7 +14117,7 @@ msgid "Precise Z height" msgstr "Alçada Z precisa" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11618,38 +14131,38 @@ msgstr "Ajustament en Arc( Arc fitting )" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" -"Habiliteu-lo per obtenir un fitxer de codi-G que tingui moviments G2 i G3. " -"La tolerància d'ajust és la mateixa que la resolució. \n" +"Activeu-ho per obtenir un fitxer de codi G que tingui moviments G2 i G3. La " +"tolerància d'ajust és la mateixa que la resolució.\n" "\n" -"Nota: Per a les màquines de sabatilles, es recomana desactivar aquesta " -"opció. Klipper no es beneficia de les ordres arc, ja que aquestes es " -"divideixen de nou en segments de línia pel firmware. Això resulta en una " -"reducció de la qualitat de la superfície, ja que els segments de línia es " -"converteixen en arcs per la talladora i després tornen als segments de línia " -"pel firmware." +"Nota: per a les màquines Klipper, es recomana desactivar aquesta opció. " +"Klipper no es beneficia de les ordres d'arc, ja que el microprogramari torna " +"a dividir-les en segments de línia. Això es tradueix en una reducció de la " +"qualitat de la superfície a mesura que els segments de línia es converteixen " +"en arcs pel tallador i després el microprogramari torna a segments de línia." msgid "Add line number" msgstr "Afegir número de línia" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Habiliteu això per afegir el número de línia ( Nx ) al començament de cada " -"línia de Codi-G" +"línia de Codi-G." msgid "Scan first layer" msgstr "Escanejar la primera capa" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Habiliteu-ho per permetre que la càmera de la impressora comprovi la " "qualitat de la primera capa" @@ -11659,7 +14172,7 @@ msgstr "Tipus de broquet" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "El material metàl·lic del broquet. Això determina la resistència abrasiva " "del broquet i quin tipus de filament es pot imprimir" @@ -11673,6 +14186,9 @@ msgstr "Acer endurit" msgid "Stainless steel" msgstr "Acer inoxidable" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Llautó" @@ -11692,7 +14208,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Estructura de la impressora" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "La disposició física i els components d'un dispositiu d'impressió" msgid "CoreXY" @@ -11722,26 +14238,27 @@ msgstr "" "Activeu aquesta opció si la màquina té ventilador auxiliar de refrigeració " "de peces. Comanda de Codi-G: M106 P2 S ( 0-255 )." +#, fuzzy msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"Engegar el ventilador aquest nombre de segons abans de l'hora d'inici " -"programat ( podeu utilitzar segons fraccionats ). Assumeix una acceleració " -"infinita per a aquesta estimació temporal, i només tindrà en compte els " -"moviments G1 i G0 ( Ajustament en Arc( arc fitting ) no és compatible ).\n" -"No mourà comandes de ventilador des de Codis-G personalitzats ( actuen com " -"una mena de \"barrera\" ).\n" -"No mourà comandes de ventilador des de Codis-G d'inici si s'activa el 'només " -"Codi-G d'inici personalitzat'.\n" -"Utilitzeu 0 per desactivar." +"Inicieu el ventilador aquest nombre de segons abans de l'hora d'inici " +"objectiu (podeu utilitzar fraccions de segons). Assumeix una acceleració " +"infinita per a aquesta estimació de temps i només tindrà en compte els " +"moviments G1 i G0 (l'ajust d'arc no és compatible).\n" +"No mourà les ordres dels ventiladors dels Codi-G personalitzats (actuen com " +"una mena de \"barrera\").\n" +"No mourà les ordres del ventilador al Codi-G d'inici si està activat " +"l'\"únic Codi-G d'inici personalitzat\".\n" +"Utilitzeu 0 per desactivar-lo." msgid "Only overhangs" msgstr "Només voladissos" @@ -11771,7 +14288,7 @@ msgstr "" msgid "Time cost" msgstr "Cost per Temps" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "El cost de la impressora per hora" msgid "money/h" @@ -11801,8 +14318,8 @@ msgstr "" msgid "G-code flavor" msgstr "Tipus de Codi-G" -msgid "What kind of gcode the printer is compatible with" -msgstr "Amb quin tipus de Codi-G és compatible la impressora" +msgid "What kind of G-code the printer is compatible with." +msgstr "Amb quin tipus de Codi-G és compatible la impressora." msgid "Klipper" msgstr "Klipper" @@ -11810,21 +14327,21 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Impressora modificada de pellets" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" "Activeu aquesta opció si la impressora utilitza pellets en lloc de filaments" msgid "Support multi bed types" msgstr "Admetre diversos tipus de llits" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "Activa aquesta opció si vols utilitzar diversos tipus de llit" msgid "Label objects" msgstr "Etiquetar objectes" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11838,8 +14355,8 @@ msgstr "" msgid "Exclude objects" msgstr "Excloure objectes" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "Activeu aquesta opció per afegir l'ordre EXCLUDE OBJECT al Codi-G" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Activeu aquesta opció per afegir l'ordre EXCLUDE OBJECT al Codi-G." msgid "Verbose G-code" msgstr "Codi-G detallat" @@ -11864,6 +14381,140 @@ msgstr "" "juntes i reduir el temps. El perímetre serà impresa amb l'alçada de la capa " "original." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Combinació de farciment: alçada màxima de la capa" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Alçada màxima de la capa per a l'ompliment dispers combinat.\n" +"\n" +"Establiu-lo a 0 o 100% to utilitzeu el diàmetre del broquet (per a una " +"reducció màxima del temps d'impressió) o un valor de ~80% to maximitzeu la " +"força d'ompliment escassa.\n" +"\n" +"El nombre de capes sobre les quals es combina l'emplenament s'obté dividint " +"aquest valor amb l'alçada de la capa i arrodonit al decimal més proper.\n" +"\n" +"Utilitzeu valors absoluts en mm (p. ex. 0,32 mm per a un filtre de 0,4 mm) o " +"valors % (p. ex. 80%). Aquest valor no ha de ser més gran que el diàmetre " +"del broquet." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "Filament per imprimir farciment poc dens intern." @@ -11897,26 +14548,32 @@ msgstr "Farciment superposat a paret superior/inferior\"" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -"L'àrea superior de farciment sòlid s'amplia lleugerament per superposar-se " -"amb la paret per a una millor unió i minimitzar l'aparició de forats on el " -"farciment superior es troba amb les parets. Un valor de 25-30% és un bon " -"punt de partida, minimitzant l'aparició de forats. El valor percentual és " -"relatiu a l'amplada de línia del farciment poc dens" +"L'àrea de farciment sòlida superior s'amplia lleugerament per superposar-se " +"a la paret per a una millor unió i per minimitzar l'aparició de forats on " +"l'ompliment superior es troba amb les parets. Un valor de 25-30% is és un " +"bon punt de partida, minimitzant l'aparició de forats. El valor percentual " +"és relatiu a l'amplada de línia de l'emplenament escàs" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Velocitat de farciment poc dens intern" +msgid "Inherits profile" +msgstr "Hereta el perfil" + +msgid "Name of parent profile." +msgstr "Nom del perfil pare" + msgid "Interface shells" msgstr "Carcasses d'interfície" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Forçar la generació de carcasses sòlides entre materials/volums adjacents. " "Això és útil per a impressions de múltiples extrusores amb materials " @@ -11932,10 +14589,16 @@ msgstr "" msgid "Interlocking depth of a segmented region" msgstr "Profunditat d'entrellaçament d'una regió segmentada" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Profunditat d'entrellaçament d'una regió segmentada. Zero desactiva aquesta " -"funció." +"Profunditat d'enclavament d'una regió segmentada. S'ignorarà si " +"\"mmu_segmented_region_max_width\" és zero o si " +"\"mmu_segmented_region_interlocking_depth\" és més gran que " +"\"mmu_segmented_region_max_width\". Zero desactiva aquesta funció." msgid "Use beam interlocking" msgstr "Utilitzar feixos d'entrellaçament" @@ -12018,7 +14681,7 @@ msgstr "Tota la capa sòlida" msgid "Ironing Pattern" msgstr "Patró de planxat" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "El patró que s'utilitzarà a l'hora de planxar" msgid "Ironing flow" @@ -12026,7 +14689,7 @@ msgstr "Flux de planxa" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "La quantitat de material a extruir durant el planxat. Relatiu al flux de " "l'alçada normal de la capa. Un valor massa alt provoca una sobreextrusió a " @@ -12035,36 +14698,51 @@ msgstr "" msgid "Ironing line spacing" msgstr "Interlineat entre línies de planxa" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "La distància entre les línies de planxa" +msgid "Ironing inset" +msgstr "Reculat per al planxat" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"La distància a mantenir des de les vores. Un valor de 0 l'estableix a la " +"meitat del diàmetre del broquet" + msgid "Ironing speed" msgstr "Velocitat de planxat" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Velocitat d'impressió de les línies de planxat" -msgid "Ironing angle" -msgstr "Angle de planxat" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"El planxat angular es fa a. Un nombre negatiu desactiva aquesta funció i " -"utilitza el mètode predeterminat." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "Aquesta part de Codi-G s'insereix en cada canvi de capa després de " -"l'aixecament z" +"l'aixecament Z." + +msgid "Clumping detection G-code" +msgstr "" msgid "Supports silent mode" msgstr "Admet el mode silenciós" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Si la màquina admet el mode silenciós en el qual la màquina utilitza una " "acceleració més baixa per imprimir" @@ -12077,25 +14755,25 @@ msgstr "Límits de la màquina" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Si està habilitat, els límits de la màquina s'emetran al fitxer de Codi-G.\n" "Aquesta opció s'ignorarà si el tipus de Codi-G està definit com a Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Aquest Codi-G s'utilitzarà com a codi per a la pausa d'impressió. L'usuari " -"pot inserir el Codi-G de pausa al visualitzador de Codi-G" +"pot inserir el Codi-G de pausa al visualitzador de Codi-G." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Aquest Codi-G s'utilitzarà com a codi personalitzat" msgid "Small area flow compensation (beta)" msgstr "Compensació de flux d'àrea petita( beta )" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "Activar la compensació de flux per a petites àrees de farciment" msgid "Flow Compensation Model" @@ -12104,13 +14782,9 @@ msgstr "Model de Compensació de Flux" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Model de Compensació de Flux, utilitzat per ajustar el flux per a petites " -"àrees de farciment. El model s'expressa com un parell de valors separats per " -"comes per a la longitud d'extrusió i els factors de correcció de flux, un " -"per línia, en el següent format: \"1.234,5.678\"" msgid "Maximum speed X" msgstr "Velocitat màxima X" @@ -12184,6 +14858,15 @@ msgstr "Màxim sacsejada( Jerk ) a l'eix Z" msgid "Maximum jerk of the E axis" msgstr "Màxim sacsejada( Jerk ) a l'eix E" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Velocitat mínima d'extrusió" @@ -12211,27 +14894,43 @@ msgstr "Màxima acceleració de retracció ( M204 R )" msgid "Maximum acceleration for travel" msgstr "Màxima acceleració de desplaçament" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" "Màxima acceleració de desplaçament ( M204 T ), només s'aplica a Marlin 2" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Mín" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Màx" + +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "La velocitat del ventilador de refrigeració de peça es pot augmentar quan " "s'habilita la refrigeració automàtica. Aquesta és la limitació de velocitat " "màxima del ventilador de refrigeració de peça" -msgid "Max" -msgstr "Màx" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"La major alçada de capa imprimible per a l'extrusor. S'utilitza per limitar " -"l'alçada màxima de la capa quan s'habilita l'Alçada de Capa Adaptativa" msgid "Extrusion rate smoothing" msgstr "Suavitzat de la velocitat d'extrusió" @@ -12242,23 +14941,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12269,58 +14968,71 @@ msgstr "" "( alta velocitat/amplada més gran ) a una extrusió de menor flux ( menor " "velocitat/amplada més petita ) i viceversa.\n" "\n" -"Defineix la velocitat màxima a la qual el flux volumètric extruït en mm3/seg " +"Defineix la velocitat màxima a la qual el flux volumètric extruït en mm³/s " "pot canviar amb el temps. Els valors més alts signifiquen que es permeten " "canvis de velocitat d'extrusió més alts, cosa que resulta en transicions de " "velocitat més ràpides.\n" "\n" -"Un valor 0 desactiva la característica. \n" +"Un valor 0 desactiva la característica.\n" "\n" "Per a una impressora d'extrusió directa d'alta velocitat i alt flux ( com " "Bambu Lab o Voron ) aquest valor normalment no és necessari. No obstant " "això, pot proporcionar algun benefici marginal en certs casos en què les " "velocitats de les característiques varien molt. Per exemple, quan hi ha " "desacceleracions agressives a causa dels voladissos. En aquests casos es " -"recomana un valor elevat d'uns 300-350mm3/s2, ja que això permet un " +"recomana un valor elevat d'uns 300-350 mm³/s², ja que això permet un " "suavitzat suficient per ajudar a avançar la pressió a aconseguir una " "transició de flux més suau.\n" "\n" "Per a impressores més lentes sense Avanç de Pressió, el valor s'ha " -"d'establir molt més baix. Un valor de 10-15mm3/s2 és un bon punt de partida " -"per als extrusors d'extrusió directa i 5-10mm3/s2 per al tipus Bowden. \n" +"d'establir molt més baix. Un valor de 10-15 mm³/s² és un bon punt de partida " +"per als extrusors d'extrusió directa i 5-10 mm³/s² per al tipus Bowden.\n" "\n" "Aquesta característica es coneix com a Equalitzador de Pressió a Prusa " "slicer.\n" "\n" "Nota: aquest paràmetre desactiva l'Ajustament en Arc( arc fitting )." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "Longitud del segment de suavitzat" +#, fuzzy msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Un valor més baix dóna lloc a transicions de velocitat d'extrusió més suaus. " -"Tanmateix, això resulta en un fitxer gcode significativament més gran i més " -"instruccions per processar per a la impressora. \n" +"Un valor més baix produeix transicions de velocitat d'extrusió més suaus. " +"Tanmateix, això dóna com a resultat un fitxer Codi-G significativament més " +"gran i més instruccions per processar la impressora.\n" "\n" -"El valor predeterminat a 3 funciona bé en la majoria dels casos. Si la " -"impressora s'entrebanca, augmenteu aquest valor per reduir el nombre " -"d'ajustos realitzats\n" +"El valor predeterminat de 3 funciona bé en la majoria dels casos. Si la " +"impressora està tartamudeig, augmenta aquest valor per reduir el nombre " +"d'ajustaments fets.\n" "\n" -"Valors permesos: 1-5" +"Valors permesos: 0,5-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "Aplicar només a funcions externes" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Aplica el suavitzat de velocitat d'extrusió només en perímetres externs i " +"voladissos. Això pot ajudar a reduir els artefactes a causa de les " +"transicions de velocitat pronunciades en els voladissos visibles externament " +"sense afectar la velocitat d'impressió de les funcions que no seran visibles " +"per l'usuari." + +msgid "Minimum speed for part cooling fan." msgstr "Velocitat mínima per al ventilador de refrigeració de peces" msgid "" @@ -12336,32 +15048,24 @@ msgstr "" "Activeu auxiliary_fan a la configuració de la impressora per utilitzar " "aquesta funció. Comanda de Codi-G: M106 P2 S ( 0-255 )" -msgid "Min" -msgstr "Mín" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"L'alçada de capa imprimible més baixa per a l'extrusor. S'utilitza per " -"limitar l'alçada mínima de la capa quan s'activa l'Alçada de Capa Adaptativa" msgid "Min print speed" msgstr "Velocitat d'impressió mínima" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" "La velocitat mínima d'impressió a la qual la impressora disminuirà per " "intentar mantenir el temps mínim de capa anterior, quan \"alentir per a un " "millor refredament de la capa\" està habilitat." -msgid "Nozzle diameter" -msgstr "Diàmetre del broquet( nozzle )" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diàmetre del broquet" msgid "Configuration notes" @@ -12387,7 +15091,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Volum del broquet" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Volum del broquet entre la talladora i l'extrem del broquet" msgid "Cooling tube position" @@ -12435,7 +15139,7 @@ msgstr "Distància de càrrega addicional" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Quan s'estableix a zero, la distància que el filament es mou des de la " @@ -12457,17 +15161,24 @@ msgstr "Reduir la retracció de farciment" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "No retrau quan el desplaçament està totalment a la zona de farciment. Això " "vol dir que l'oozing( goteig ) queda amagat. Això pot reduir els temps de " "retracció per a models complexos i estalviar temps d'impressió, però fer que " "el laminat i la generació de Codi-G siguin més lents" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Aquesta opció farà baixar la temperatura de les extrusores inactives per " +"evitar degoteig." + msgid "Filename format" msgstr "Format del nom del fitxer" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "L'usuari pot definir el nom del fitxer del projecte quan exporta" msgid "Make overhangs printable" @@ -12494,14 +15205,11 @@ msgstr "Fer voladissos imprimibles - Zona de forats( Sense suports )" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Àrea màxima d'un forat a la base del model abans que s'ompli amb material " "cònic. Un valor de 0 omplirà tots els forats de la base del model." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Detectar voladís de perímetre" @@ -12514,6 +15222,9 @@ msgstr "" "utilitzar una velocitat diferent per imprimir. Per al voladís del 100%%, " "s'utilitza la velocitat de pont." +msgid "Filament to print walls." +msgstr "Filament per imprimir parets" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." @@ -12521,10 +15232,10 @@ msgstr "" "Amplada de línia del perímetre interior. Si s'expressa en %, es calcularà " "sobre el diàmetre del broquet." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Velocitat del perímetre interior" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Nombre de perímetres de cada capa" msgid "Alternate extra wall" @@ -12532,20 +15243,20 @@ msgstr "Perímetre addicional alternant" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" "Aquest ajustament afegeix un perímetre addicional a totes les altres capes. " "D'aquesta manera, el farciment s'encaixa verticalment entre les parets, " -"donant lloc a impressions més fortes. \n" +"donant lloc a impressions més fortes.\n" "\n" "Quan aquesta opció està habilitada, cal desactivar l'opció 'Assegurar el " -"gruix de la carcassa vertical'. \n" +"gruix de la carcassa vertical'.\n" "\n" "No es recomana l'ús de farciment de Llampec juntament amb aquesta opció, ja " "que hi ha un farciment limitat per ancorar els perímetres addicionals." @@ -12563,16 +15274,25 @@ msgstr "" "fitxer Codi-G com a primer argument, i poden accedir als paràmetres de " "configuració d'Snapmaker Orca llegint variables d'entorn." +msgid "Printer type" +msgstr "Tipus d'impressora" + +msgid "Type of the printer." +msgstr "Tipus d'impressora" + msgid "Printer notes" msgstr "Notes de la impressora" msgid "You can put your notes regarding the printer here." msgstr "Podeu posar les vostres notes sobre la impressora aquí." +msgid "Printer variant" +msgstr "Model d'impressora" + msgid "Raft contact Z distance" msgstr "Distància Z de contacte de la Vora d'Adherència" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Distància Z entre l'objecte i la Vora d'Adherència. S'ignorarà per a " "interfície soluble" @@ -12580,19 +15300,19 @@ msgstr "" msgid "Raft expansion" msgstr "Expansió de la Vora d'Adherència" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Expandir totes les capes de Vora d'Adherència en el pla XY" msgid "Initial layer density" msgstr "Densitat de la primera capa" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Densitat de la primera Vora d'Adherència o capa de suport" msgid "Initial layer expansion" msgstr "Expansió de la primera capa" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Expandir la primera Vora d'Adherència o capa de suport per millorar " "l'adherència de la placa d'impressió" @@ -12602,26 +15322,27 @@ msgstr "Capes de Vora d'Adherència" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "L'objecte serà elevat per aquest nombre de capes de suport. Utilitzar " "aquesta funció per evitar deformacions( warping ) quan imprimiu ABS" +#, fuzzy msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" -"La trajectòria del Codi-G es genera després de simplificar el contorn del " -"model per evitar massa punts i línies de Codi-G al fitxer gcode. Un valor " -"més petit significa una major resolució i més temps de laminació" +"El camí del codi G es genera després de simplificar el contorn del model per " +"evitar massa punts i línies gcode al fitxer Codi-G. Un valor més petit " +"significa una resolució més alta i més temps per tallar." msgid "Travel distance threshold" msgstr "Llindar de distància de desplaçament" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Només s'activa la retracció quan la distància de desplaçament és superior a " "aquest llindar" @@ -12630,7 +15351,7 @@ msgid "Retract amount before wipe" msgstr "Quantitat de retracció abans de netejar" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "La longitud de retracció ràpida abans de la neteja, en relació amb la " "longitud de retracció" @@ -12638,7 +15359,7 @@ msgstr "" msgid "Retract when change layer" msgstr "Retracció quan canvia de capa" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Forçar una retracció quan canvia de capa" msgid "Retraction Length" @@ -12646,22 +15367,19 @@ msgstr "Longitud de Retracció" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Una certa quantitat de material en l'extrusora es tira cap enrere per evitar " -"l'Ooze( goteig ) durant el llarg desplaçament. Definiu zero per desactivar " -"la retracció" -msgid "Long retraction when cut(experimental)" -msgstr "Retracció llarga en tallar(experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Retracció llarga quan es talla (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Característica experimental. Retreure i tallar el filament a més distància " +"Característica experimental: Retreure i tallar el filament a més distància " "durant els canvis per minimitzar la purga. Tot i que això redueix " "significativament el flux, també pot augmentar el risc d'obstruccions del " "broquet o altres problemes d'impressió." @@ -12670,49 +15388,58 @@ msgid "Retraction distance when cut" msgstr "Distància de retracció quan es talla" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Característica experimental. Longitud de retracció abans de tallar durant el " +"Característica experimental: Longitud de retracció abans de tallar durant el " "canvi de filament" -msgid "Z hop when retract" -msgstr "Salt en Z quan hi ha retracció" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Alçada Z-hop" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Cade vegada que es fa una retracció, s'aixeca una mica el broquet per crear " "espai lliure entre el broquet i la impressió. Evita que el broquet colpegi " "la impressió en els desplaçaments. L'ús de la línia espiral per aixecar z " "pot evitar l'aparició de fils" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Límit inferior de salt en Z" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "El salt en Z només s'aplicarà quan Z estigui per sobre d'aquest valor i " -"estigui per sota del paràmetre: \"Límit superior de salt en Z\"" +"estigui per sota del paràmetre: \"Límit superior de salt en Z\"." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Límit superior de salt en Z" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Si aquest valor és positiu, el salt en Z només s'aplicarà quan Z estigui per " "sobre del paràmetre: \"Límit inferior de salt en Z\" i estigui per sota " -"d'aquest valor" +"d'aquest valor." -msgid "Z hop type" +msgid "Z-hop type" msgstr "Tipus de salt en Z" +msgid "Type of Z-hop." +msgstr "" + msgid "Slope" msgstr "Pendent" @@ -12723,11 +15450,11 @@ msgid "Traveling angle" msgstr "Angle de viatge" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" "Angle de viatge per al tipus Salt en Z de Pendent i Espiral. Si l'establiu a " -"90°, es produeix un Aixecament Normal" +"90°, es produeix un Aixecament Normal." msgid "Only lift Z above" msgstr "Només aixecar Z per sobre" @@ -12753,7 +15480,7 @@ msgid "On surfaces" msgstr "A les superfícies" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Forçar el comportament de salt en Z. Aquest ajustament es veu afectada per " @@ -12771,6 +15498,18 @@ msgstr "Només a baix" msgid "Top and Bottom" msgstr "A dalt i a baix" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Longitud addicional en reiniciar" @@ -12792,18 +15531,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Velocitat de retracció" -msgid "Speed of retractions" -msgstr "Velocitat de les retraccions" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Velocitat de detracció" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Velocitat de recàrrega del filament a l'extrusora. Zero significa la mateixa " -"velocitat amb la retracció" msgid "Use firmware retraction" msgstr "Utilitza la retracció del firmware" @@ -12823,15 +15560,15 @@ msgid "Disable set remaining print time" msgstr "Desactivar el temps d'impressió restant" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Desactivar la generació del M73: establir el temps d'impressió restant al " -"gcode final" +"Codi-G final." msgid "Seam position" msgstr "Posició de la costura" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "La posició inicial per imprimir cada capa del perímetre exterior" msgid "Nearest" @@ -12840,6 +15577,9 @@ msgstr "Més proper" msgid "Aligned" msgstr "Alineat" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Darrera" @@ -12927,16 +15667,16 @@ msgstr "Velocitat d'Unió en Bisell" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Aquesta opció estableix la velocitat d'impressió de les Unions en Bisell. Es " -"recomana imprimir Unions en Bisell a velocitat lenta (menys de 100 mm / s). " +"recomana imprimir Unions en Bisell a velocitat lenta (menys de 100 mm / s). " "També és recomanable habilitar el \"suavitzat de la velocitat d'extrusió\" " "si la velocitat establerta varia significativament de la velocitat dels " "perímetres exteriors o interiors. Si la velocitat especificada aquí és " @@ -12997,9 +15737,10 @@ msgid "Role base wipe speed" msgstr "Velocitat de neteja basada en l'acció" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "La velocitat de neteja està determinada per la velocitat de l'acció " "d'extrusió actual, per exemple. Si s'executa una acció de neteja " @@ -13021,36 +15762,35 @@ msgid "Wipe before external loop" msgstr "Netejar abans del bucle extern" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" -"Per minimitzar la visibilitat de la possible sobreextrusió a l'inici d'un " -"perímetre extern en imprimir amb ordre d'impressió de perímetre Exterior/" -"Interior o Interior/Exterior/Interior, la deretracció es realitza " -"lleugerament a l'interior des de l'inici del perímetre exterior. D'aquesta " -"manera, qualsevol potencial sobreextrusió queda amagada de la superfície " -"exterior. \n" +"Per minimitzar la visibilitat d'una possible sobreextrusió a l'inici d'un " +"perímetre extern quan s'imprimeix amb l'ordre d'impressió de paret exterior/" +"interior o interior/exterior/interior, la retirada es realitza lleugerament " +"a l'interior des de l'inici del perímetre extern. D'aquesta manera, " +"qualsevol potencial sobre extrusió s'amaga de la superfície exterior.\n" "\n" -"Això és útil quan s'imprimeix amb ordre d'impressió de perfil Exterior/" -"Interior o Interior/Exterior/Interior, ja que en aquests modes és més " -"probable que un perímetre extern s'imprimeixi immediatament després d'un " -"moviment de detracció." +"Això és útil quan s'imprimeix amb l'ordre d'impressió de paret exterior/" +"interior o interior/exterior/interior, ja que en aquests modes és més " +"probable que s'imprimeixi un perímetre extern immediatament després d'un " +"moviment de retirada." msgid "Wipe speed" msgstr "Velocitat de neteja" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "La velocitat de neteja està determinada per l'ajustament de velocitat " "especificada en aquesta configuració. Si el valor s'expressa en percentatge " @@ -13061,55 +15801,76 @@ msgstr "" msgid "Skirt distance" msgstr "Distància de la faldilla" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distància de la faldilla a la Vora d'Adherència o a l'objecte" +msgid "Skirt start point" +msgstr "Punt d'inici de la faldilla" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Angle des del centre de l'objecte fins al punt inicial de la falda. Zero és " +"la posició més correcta, en sentit contrari a les agulles del rellotge és un " +"angle positiu." + msgid "Skirt height" msgstr "Alçada de la faldilla" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "Quantes capes de faldilla. Normalment només una capa" +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" + msgid "Draft shield" msgstr "Escut contra corrents d'aire" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"Un escut contra corrents d'aire és útil per protegir una impressió ABS o ASA " -"de la deformació i el despreniment del llit d'impressió a causa del corrent " -"d'aire. Normalment només es necessita amb impressores de marc obert, és a " -"dir, sense tancament. \n" -"\n" -"Opcions:\n" -"Habilitat = la faldilla és tan alta com l'objecte imprès més alt.\n" -"Limitat = la faldilla és tan alta com especifica l'alçada de la faldilla.\n" -"\n" -"Nota: Amb l'escut contra corrents d'aire actiu, la faldilla s'imprimirà a " -"distància de faldilla de l'objecte. Per tant, si les vores d'adherència " -"estan actives pot creuar-se amb elles. Per evitar-ho, augmenteu el valor de " -"distància de la faldilla.\n" - -msgid "Limited" -msgstr "Limitat" +"Activat = la faldilla és tan alta com l'objecte imprès més alt. En cas " +"contrari, s'utilitza \"Alçada de la faldilla\".\n" +"Nota: amb l'escut de corrent actiu, la faldilla s'imprimirà a una distància " +"de la faldilla de l'objecte. Per tant, si les vores estan actives, es pot " +"creuar amb elles. Per evitar-ho, augmenta el valor de la distància de la " +"faldilla.\n" msgid "Enabled" msgstr "Habilitat" +msgid "Skirt type" +msgstr "Tipus de faldilla" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Combinat: faldilla única per a tots els objectes, Per objecte: faldilla " +"d'objecte individual." + +msgid "Per object" +msgstr "Escalat per objecte" + msgid "Skirt loops" msgstr "Voltes de la faldilla" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "" "Nombre de voltes per a la faldilla. Zero significa faldilla desactivada" @@ -13128,33 +15889,44 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" "Longitud mínima d'extrusió del filament en mm en imprimir la faldilla. Zero " "significa que aquesta funció està desactivada.\n" "\n" -"L'ús d'un valor diferent de zero és útil si la impressora està configurada " -"per imprimir sense una línia principal." +"Utilitzar un valor diferent de zero és útil si la impressora està " +"configurada per imprimir sense una línia principal.\n" +"El nombre final de bucles no es té en compte en organitzar o validar la " +"distància dels objectes. Augmenteu el nombre de bucle en aquest cas." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "La velocitat d'impressió en el Codi-G exportat s'alentirà, quan el temps " "estimat de capa sigui més curt que aquest valor, per obtenir un millor " -"refredament d'aquestes capes" +"refredament d'aquestes capes." msgid "Minimum sparse infill threshold" msgstr "Llindar mínim de farciment poc dens" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "L'àrea de farciment poc dens que sigui més petita que el valor del llindar " "serà substituït per un farciment sòlid intern" +msgid "Solid infill" +msgstr "Farciment sòlid" + +msgid "Filament to print solid infill." +msgstr "Filament per imprimir farciment sòlid" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." @@ -13162,14 +15934,14 @@ msgstr "" "Amplada de línia de farciment sòlid intern. Si s'expressa en %, es calcularà " "sobre el diàmetre del broquet." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Velocitat de farciment sòlid intern, no de la superfície superior i inferior" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "L'espiralització suavitza els moviments z del contorn exterior. I converteix " "un model sòlid en una sola impressió de perímetre amb capes inferiors " @@ -13179,22 +15951,51 @@ msgid "Smooth Spiral" msgstr "Suavitzar l'Espiral" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Suavitzar l'Espiral suavitza també els moviments X i Y, de manera que no " -"s'aprecia cap costura, ni tan sols a les direccions XY en parets que no són " -"verticals" +"L'espiral suau suavitza també els moviments X i Y, donant lloc a cap costura " +"visible, fins i tot en les direccions XY a les parets que no són verticals" msgid "Max XY Smoothing" msgstr "Suavitzat màxim XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Distància màxima per moure punts en XY per intentar aconseguir una espiral " -"suau. Si s'expressa en %, es calcularà sobre el diàmetre del broquet" +"suau. Si s'expressa com a %, es calcularà sobre el diàmetre del broquet" + +msgid "Spiral starting flow ratio" +msgstr "Relació de flux d'inici en Espiral" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Estableix la relació de flux inicial mentre es fa la transició de l'última " +"capa inferior a l'espiral. Normalment, la transició en espiral escala la " +"relació de flux des de 0% to 100% d en el primer bucle, cosa que en alguns " +"casos pot provocar una subextrusió a l'inici de l'espiral." + +msgid "Spiral finishing flow ratio" +msgstr "Relació de flux de finalització en Espiral" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Estableix la relació de flux d'acabat mentre finalitza l'espiral. " +"Normalment, la transició en espiral escala la relació de flux des de 100% to " +"0% d en l'últim bucle, cosa que en alguns casos pot provocar una subextrusió " +"al final de l'espiral." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13221,19 +16022,53 @@ msgstr "Tradicional" msgid "Temperature variation" msgstr "Variació de temperatura" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Diferència de temperatura a aplicar quan una extrusora no està activa. El " +"valor no s'utilitza quan 'idle_temperature' a la configuració del filament " +"s'estableix en un valor diferent de zero." + +msgid "Preheat time" +msgstr "Temps de preescalfament" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Per reduir el temps d'espera després del canvi d'eina, Orca pot preescalfar " +"la següent eina mentre l'eina actual encara està en ús. Aquesta configuració " +"especifica el temps en segons per preescalfar la següent eina. Orca inserirà " +"una ordre M104 per preescalfar l'eina amb antelació." + +msgid "Preheat steps" +msgstr "Passos de preescalfament" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Inseriu diverses ordres de preescalfament (p. ex., M104.1). Només útil per a " +"Prusa XL. Per a altres impressores, poseu-la a 1." + msgid "Start G-code" msgstr "Codi-G inicial" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Codi-G inicial quan comença tota la impressió" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Codi-G inicial quan comença la impressió d'aquest filament" msgid "Single Extruder Multi Material" msgstr "Extrusor únic multimaterial" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "Utilitza un sol broquet per imprimir multifilament" msgid "Manual Filament Change" @@ -13255,18 +16090,18 @@ msgstr "" msgid "Purge in prime tower" msgstr "Purgar a la Torre de Purga" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "Purga el filament restant a la Torre de Purga" msgid "Enable filament ramming" -msgstr "Habilitar Moldejat de punta( Ramming ) de filament" +msgstr "" msgid "No sparse layers (beta)" msgstr "Sense capes poc denses( beta )" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -13338,32 +16173,38 @@ msgid "Enable support generation." msgstr "Habilitar la generació de suports." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normal( auto ) i arbre( auto ) s'utilitzen per generar suports " -"automàticament. Si se selecciona normal( manual ) o arbre( manual ), només " -"es generen suports forçats" +"Normal (automàtic) i Arbre (automàtic) s'utilitzen per generar suport " +"automàticament. Si se selecciona Normal (manual) o Arbre (manual), només es " +"generen els aplicadors de suport" -msgid "normal(auto)" -msgstr "normal( auto )" +msgid "Normal (auto)" +msgstr "Normal (automàtic)" -msgid "tree(auto)" -msgstr "arbre( auto )" +msgid "Tree (auto)" +msgstr "Arbre (automàtic)" -msgid "normal(manual)" -msgstr "normal( manual )" +msgid "Normal (manual)" +msgstr "Normal (manual)" -msgid "tree(manual)" -msgstr "arbre( manual )" +msgid "Tree (manual)" +msgstr "Arbre (manual)" -msgid "Support/object xy distance" -msgstr "Distància suport/objecte a xy" +msgid "Support/object XY distance" +msgstr "Distància suport/objecte a XY" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Separació XY entre un objecte i el seu suport" +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Separació XY entre un objecte i el seu suport a la primera capa." + msgid "Pattern angle" msgstr "Angle del patró" @@ -13375,7 +16216,7 @@ msgstr "" msgid "On build plate only" msgstr "Només a la placa d'impressió" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "" "No crear suport a la superfície del model, només a la placa d'impressió" @@ -13388,22 +16229,22 @@ msgid "" msgstr "" "Només crear suports a regions crítiques, incloent cua afilada, voladís, etc." -msgid "Remove small overhangs" -msgstr "Eliminar els voladissos petits" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Eliminar els voladissos petits que possiblement no necessiten suports." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Distància Z superior" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "La distància z entre la interfície de suport superior i l'objecte" msgid "Bottom Z distance" msgstr "Distància Z inferior" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "La distància z entre la interfície de suport inferior i l'objecte" msgid "Support/raft base" @@ -13411,7 +16252,7 @@ msgstr "Base del Suport/Vora d'Adherència" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filament per imprimir base del suport i Vora d'Adherència. \"Per defecte\" " "significa que no s'utilitza cap filament específic per al suport i s'usarà " @@ -13447,7 +16288,7 @@ msgstr "Interfície de Suport/Vora d'Adherència" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament per imprimir interfície de suport. \"Per defecte\" vol dir que no " "hi ha filament específic per a la interfície de suport i s'utilitza el " @@ -13456,13 +16297,13 @@ msgstr "" msgid "Top interface layers" msgstr "Capes de la interfície superior" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Nombre de capes d'interfície superior" msgid "Bottom interface layers" msgstr "Capes de la interfície inferior" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Nombre de capes de la interfície inferior" msgid "Same as top" @@ -13471,25 +16312,26 @@ msgstr "Igual que la part superior" msgid "Top interface spacing" msgstr "Espai entre línies de la interfície superior" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Espaiat de les línies de la interfície. Zero significa interfície sòlida" msgid "Bottom interface spacing" msgstr "Espai entre línies de la interfície inferior" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Espaiat de les línies inferiors de la interfície. Zero significa interfície " "sòlida" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Velocitat de la interfície de suport" msgid "Base pattern" msgstr "Patró de la base" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Patró lineal del suport" msgid "Rectilinear grid" @@ -13504,7 +16346,7 @@ msgstr "Patró de la interfície" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Patró de línia de la interfície de suport. El patró predeterminat per a la " "interfície de suport no soluble és Rectilini, mentre que el patró " @@ -13516,17 +16358,17 @@ msgstr "Entrellaçat Rectilini" msgid "Base pattern spacing" msgstr "Espaiat del patró base" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Espaiat entre línies de suport" msgid "Normal Support expansion" msgstr "Expansió de Suport Normal" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" "Augmentar ( + ) o disminuir ( - ) l'expansió horitzontal dels suports normals" -msgid "Speed of support" +msgid "Speed of support." msgstr "Velocitat del suport" msgid "" @@ -13547,9 +16389,15 @@ msgstr "" "mentre que l'estil híbrid crearà una estructura similar al suport normal " "sota grans voladissos plans." +msgid "Default (Grid/Organic)" +msgstr "Per defecte (Quadrícula/Orgànic)" + msgid "Snug" msgstr "Ajustat" +msgid "Organic" +msgstr "Orgànic" + msgid "Tree Slim" msgstr "Arbre Prim" @@ -13559,15 +16407,12 @@ msgstr "Arbre Fort" msgid "Tree Hybrid" msgstr "Arbre Híbrid" -msgid "Organic" -msgstr "Orgànic" - msgid "Independent support layer height" msgstr "Alçada de la capa de suport independent" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "La capa de suport utilitza una alçada de capa independent de la capa " @@ -13585,12 +16430,24 @@ msgstr "" "Es generarà un suport per a voladissos l'angle de pendent dels quals estigui " "per sota del llindar." +msgid "Threshold overlap" +msgstr "Superposició de llindars" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Si l'angle del llindar és zero, es generarà suport per als voladissos el " +"solapament dels quals estigui per sota del llindar. Com més petit sigui " +"aquest valor, més inclinat serà el voladí que es pot imprimir sense suport." + msgid "Tree support branch angle" msgstr "Angle de branca de suport en arbre" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Aquest ajustament determina l'angle màxim de voladís que les branques del " @@ -13636,22 +16493,12 @@ msgstr "" "es recomana habilitar interfícies de suport superior en lloc d'un alt valor " "de densitat de branques si es necessiten interfícies denses." -msgid "Adaptive layer height" -msgstr "Alçada de Capa Adaptativa" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Si activeu aquesta opció, l'alçada de la capa de suport en arbre, excepte la " -"primera, es calcularà automàticament " - msgid "Auto brim width" msgstr "Amplada de la Vora d'Adherència automàtica" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Si activeu aquesta opció, es calcularà automàticament l'amplada de la Vora " "d'Adherència per al suport en arbre" @@ -13659,7 +16506,7 @@ msgstr "" msgid "Tree support brim width" msgstr "Amplada de la Vora d'Adherència del suport en arbre" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" "Distància de la branca de l'arbre a la línia de la Vora d'Adherència més " "externa" @@ -13693,69 +16540,120 @@ msgstr "" "uniforme sobre la seva longitud. Una mica d'angle pot augmentar " "l'estabilitat del suport orgànic." -msgid "Branch Diameter with double walls" -msgstr "Diàmetre de branca amb parets dobles" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Les branques amb una àrea més gran que l'àrea d'un cercle d'aquest diàmetre " -"s'imprimiran amb parets dobles per a millorar l'estabilitat. Establiu aquest " -"valor a zero per a cap paret doble." - msgid "Support wall loops" msgstr "Parets al voltant del suport" -msgid "This setting specify the count of walls around support" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." msgstr "" -"Aquest ajustament especifica el nombre de perímetres al voltant del suport" +"Aquesta configuració especifica el recompte de parets de suport en el rang " +"de [0,2]. 0 significa automàtic." msgid "Tree support with infill" msgstr "Suport en arbre amb farciment" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Aquest paràmetre especifica si s'ha d'afegir farciment dins de grans buits " "de suport en arbre" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "Activar el control de temperatura" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Activeu aquesta opció per al control de temperatura de la cambra. S'afegirà " -"una comanda M191 abans de \"machine_start_gcode\"\n" -"Comandes de Codi-G: M141 / M191 S ( 0-255 )" +"Activeu aquesta opció per al control automatitzat de la temperatura de la " +"cambra. Aquesta opció activa l'emissió d'una ordre M191 abans de " +"\"machine_start_gcode\"\n" +" que estableix la temperatura de la cambra i espera fins que s'assoleix. A " +"més, emet una ordre M141 al final de la impressió per apagar l'escalfador de " +"la cambra, si n'hi ha.\n" +"\n" +"Aquesta opció es basa en el microprogramari que admet les ordres M191 i " +"M141, ja sigui mitjançant macros o de manera nativa i s'utilitza normalment " +"quan s'instal·la un escalfador de cambra actiu." msgid "Chamber temperature" msgstr "Temperatura de la cambra" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Una temperatura de cambra més alta pot ajudar a suprimir o reduir la " -"deformació( warping ) i potencialment conduir a una major resistència d'unió " -"entre capes per a materials d'alta temperatura com ABS, ASA, PC, PA, etc. Al " -"mateix temps, la filtració d'aire d'ABS i ASA empitjorarà. Mentre que per a " -"PLA, PETG, TPU, PVA i altres materials de baixa temperatura, la temperatura " -"real de la cambra no hauria de ser alta per evitar obstruccions, pel que 0, " -"que significa apagar, és molt recomanable" +"Per a materials d'alta temperatura com l'ABS, l'ASA, el PC i el PA, una " +"temperatura de la cambra més alta pot ajudar a suprimir o reduir la " +"deformació i, potencialment, conduir a una major força d'unió entre capes. " +"Tanmateix, al mateix temps, una temperatura més alta de la cambra reduirà " +"l'eficiència de la filtració d'aire per a ABS i ASA.\n" +"\n" +"Per a PLA, PETG, TPU, PVA i altres materials de baixa temperatura, aquesta " +"opció s'hauria de desactivar (establir a 0) ja que la temperatura de la " +"cambra hauria de ser baixa per evitar l'obstrucció de l'extrusora causada " +"pel suavització del material durant el trencament de calor.\n" +"\n" +"Si està activat, aquest paràmetre també estableix una variable de codi g " +"anomenada chamber_temperature, que es pot utilitzar per passar la " +"temperatura de la cambra desitjada a la macro d'inici d'impressió, o una " +"macro de remull tèrmic com aquesta: PRINT_START (altres variables) " +"CHAMBER_TEMP=[chamber_temperature]. Això pot ser útil si la vostra " +"impressora no admet les ordres M141/M191, o si voleu gestionar el remull de " +"calor a la macro d'inici d'impressió si no hi ha instal·lat un escalfador de " +"cambra actiu." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Temperatura del broquet per les capes després de l'inicial" msgid "Detect thin wall" @@ -13763,21 +16661,21 @@ msgstr "Detectar perímetres prims" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Detecta un perímetre prim que no pugui contenir dues línies d'amplada. I " "utilitzar una sola línia per imprimir. Potser no s'imprimeix gaire bé, " "perquè no és de bucle tancat" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Aquest Codi-G s'insereix quan canvia el filament, inclosa la comanda T per " -"activar el canvi d'eina" +"activar el canvi d'eina." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Aquest Codi-G s'insereix quan es canvia el rol d'extrusió" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Aquest Codi-G s'insereix quan es canvia el rol d'extrusió." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " @@ -13786,7 +16684,7 @@ msgstr "" "Amplada de línia per a les superfícies superiors. Si s'expressa en %, es " "calcularà sobre el diàmetre del broquet." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Velocitat del farciment de la superfície superior que és sòlida" msgid "Top shell layers" @@ -13795,7 +16693,7 @@ msgstr "Capes sòlides de la carcassa superior" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Aquest és el nombre de capes sòlides de la carcassa superior, inclosa la " "capa superficial superior. Quan el gruix calculat per aquest valor sigui més " @@ -13812,25 +16710,46 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"El nombre de capes sòlides superiors s'incrementa en laminar si el gruix " -"calculat per les capes superiors de la carcassa és més prim que aquest " -"valor. Això pot evitar tenir una carcassa massa fina quan l'alçada de la " -"capa és petita. 0 vol dir que aquest ajustament està desactivat i que el " -"gruix de la carcassa superior està absolutament determinat per les capes de " -"la carcassa superior" +"El nombre de capes sòlides superiors augmenta quan es tallen si el gruix " +"calculat per les capes de closca superior és més prim que aquest valor. Això " +"pot evitar tenir una closca massa fina quan l'alçada de la capa és petita. 0 " +"significa que aquesta configuració està desactivada i que el gruix de la " +"carcassa superior està absolutament determinat per les capes de la carcassa " +"superior" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Velocitat de desplaçament més ràpida i sense extrusió" msgid "Wipe while retracting" msgstr "Netejar durant retracció" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Moure el broquet al llarg de l'última trajectòria d'extrusió en les " "retraccions per netejar el material que vessi del broquet. Això pot " @@ -13840,27 +16759,25 @@ msgid "Wipe Distance" msgstr "Distància de Neteja" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" -"Descriu quant de temps es mourà el broquet al llarg de l'última trajectòria " -"en les retraccions. \n" +"Descriu quant de temps es mourà el broquet per l'últim camí quan es " +"retrairà.\n" "\n" -"Depenent de quant de temps trigui l'operació de neteja, de la rapidesa i de " -"quant de temps siguin els paràmetres de retracció de l'extrusora/filament, " -"pot ser necessari un moviment de retracció per retirar el filament " -"restant. \n" +"Depenent de quant duri l'operació de neteja, de la rapidesa i de la durada " +"de la configuració de retracció de l'extrusora/filament, pot ser que calgui " +"un moviment de retracció per retraure el filament restant.\n" "\n" -"Establint un valor a la quantitat de retracció abans de l'ajustament de " -"neteja següent, es realitzarà una retracció de l'excés abans de la neteja, " -"en cas contrari es realitzarà després." +"L'establiment d'un valor en la quantitat de retractació abans de l'esborrat " +"es realitzarà qualsevol retracció en excés abans de la neteja, sinó es " +"realitzarà després." msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " @@ -13871,6 +16788,12 @@ msgstr "" "estabilitzar la pressió de la cambra dins del broquet, per tal d'evitar " "defectes d'aparença en imprimir objectes." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Volums de purga" @@ -13891,15 +16814,20 @@ msgid "The volume of material to prime extruder on tower." msgstr "" "El volum de material que l'extrusora ha de descarregar a la Torre de Purga." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Amplada de la Torre de Purga" msgid "Wipe tower rotation angle" msgstr "Angle de rotació de la Torre de Purga" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Angle de rotació de la Torre de Purga pel que fa a l'eix X." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Angle de vèrtex del con d'estabilització" @@ -13910,15 +16838,10 @@ msgstr "" "Angle del vèrtex del con que s'utilitza per estabilitzar la Torre de Purga. " "Un angle més gran significa una base més ampla." -msgid "Wipe tower purge lines spacing" -msgstr "Espaiat de les línies de la Torre de Purga" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Espaiat de les línies de purga de la Torre de Purga." - msgid "Maximum wipe tower print speed" msgstr "Velocitat màxima d'impressió de la torre de purga" +#, fuzzy msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " "tower sparse layers. When purging, if the sparse infill speed or calculated " @@ -13933,7 +16856,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13961,8 +16884,38 @@ msgstr "" "Per als perímetres externs de la torre de purga, s'utilitza la velocitat " "perimetral interna independentment d'aquesta configuració." -msgid "Wipe tower extruder" -msgstr "Extrusor de la Torre de Purga" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -13983,6 +16936,18 @@ msgstr "" "utilitzada a la Torre de Purga. Aquests valors es fan servir per simplificar " "la creació dels volums totals de purga a continuació." +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -14006,8 +16971,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Aquest objecte s'utilitzarà per purgar el broquet després d'un canvi de " "filament per estalviar filament i disminuir el temps d'impressió. Com a " @@ -14020,13 +16985,45 @@ msgstr "Distància màxima dels ponts" msgid "Maximal distance between supports on sparse infill sections." msgstr "Distància màxima entre suports a les seccions amb farciment poc dens." +msgid "Wipe tower purge lines spacing" +msgstr "Espaiat de les línies de la Torre de Purga" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Espaiat de les línies de purga de la Torre de Purga." + +msgid "Extra flow for purging" +msgstr "Flux addicional per a la purga" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Flux addicional utilitzat per a les línies de purga a la torre de neteja. " +"Això fa que les línies de purga siguin més gruixudes o més estretes del que " +"serien normalment. L'espaiat s'ajusta automàticament." + +msgid "Idle temperature" +msgstr "Temperatura d'espera" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Temperatura del broquet quan l'eina no s'utilitza actualment en " +"configuracions multieina. Només s'utilitza quan la \"Prevenció de supuració" +"\" està activa a la configuració d'impressió. Establiu a 0 per desactivar." + msgid "X-Y hole compensation" msgstr "Compensació de forat( contorn intern ) X-Y" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Els forats( contorns interns ) de l'objecte creixeran o es reduiran en el " "pla XY segons el valor configurat. Un valor positiu fa que els forats siguin " @@ -14037,11 +17034,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "Compensació del contorn X-Y" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "El contorn( exterior ) de l'objecte creixerà o es reduirà en el pla XY " "segons valor configurat. Un valor positiu fa que el contorn sigui més gran. " @@ -14070,15 +17068,15 @@ msgstr "Marge de detecció de poliforats" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" -"Desviació màxima d'un punt respecte al radi estimat del cercle.\n" -"Com que els cilindres sovint s'exporten com a triangles de mida variable, " -"els punts poden no estar a la circumferència del cercle. Aquest ajustament " -"us permet un cert marge de maniobra per ampliar la detecció.\n" -"En mm o en % o del radi." +"Defecció màxima d'un punt al radi estimat del cercle.\n" +"Com que els cilindres s'exporten sovint com a triangles de mida variable, és " +"possible que els punts no estiguin a la circumferència del cercle. Aquesta " +"configuració us permet una mica de marge per ampliar la detecció.\n" +"En mm o en % of el radi." msgid "Polyhole twist" msgstr "Gir del poliforat" @@ -14101,7 +17099,7 @@ msgstr "Format de les miniatures del Codi-G" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Format de les miniatures del Codi-G: PNG per a la millor qualitat, JPG per a " "un menor tamany( pes ), QOI per a firmware de baixa memòria" @@ -14110,28 +17108,26 @@ msgid "Use relative E distances" msgstr "Utilitzar distàncies E relatives" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "Es recomana l'extrusió relativa quan s'utilitza l'opció \"label_objects\". " -"Alguns extrusors funcionen millor amb aquesta opció sense marcar( mode " -"d'extrusió absoluta ). La Torre de Purga només és compatible amb el mode " -"relatiu. Es recomana a la majoria d'impressores. Per defecte està marcat" +"Algunes extrusores funcionen millor amb aquesta opció sense marcar (mode " +"d'extrusió absolut). La torre de neteja només és compatible amb el mode " +"relatiu. Es recomana a la majoria d'impressores. El valor per defecte està " +"marcat" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "El generador de perímetres Clàssic produeix perímetres amb amplada " "d'extrusió constant i per a zones molt primes s'usa el farciment de buits. " "El motor Aràcne produeix perímetres amb amplada d'extrusió variable" -msgid "Classic" -msgstr "Clàssic" - msgid "Arachne" msgstr "Aràcne" @@ -14141,7 +17137,7 @@ msgstr "Longitud de transició de perímetre" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Quan es fa la transició entre diferents números de perímetres a mesura que " "la peça es fa més prima, s'assigna una certa quantitat d'espai per separar o " @@ -14158,7 +17154,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Evita la transició d'anada i tornada entre un perímetre addicional i un de " "menys. Aquest marge amplia el rang d'amplades d'extrusió que segueixen a " @@ -14177,7 +17173,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Quan crear transicions entre nombres parells i senars de perímetres. Una " "forma en falca amb un angle més gran que aquest ajustament no tindrà " @@ -14190,7 +17186,7 @@ msgstr "Recompte de distribució de perímetres" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "El nombre de perímetres, comptats des del centre, sobre els quals cal " "estendre la variació. Els valors més baixos signifiquen que els perímetres " @@ -14201,14 +17197,10 @@ msgstr "Mida mínima de l'element" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Gruix mínim dels elements fins. Els elements del model que siguin més prims " -"que aquest valor no s'imprimiran, mentre que les entitats més gruixudes que " -"la mida mínima s'ampliaran a l'amplada mínima del perímetre. S'expressa en " -"percentatge sobre el diàmetre del broquet" msgid "Minimum wall length" msgstr "Longitud mínima del perímetre" @@ -14218,22 +17210,21 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" -"Ajusteu aquest valor per evitar que s'imprimeixin perímetres curts sense " -"tancar, cosa que podria augmentar el temps d'impressió. Els valors més alts " -"eliminen més perímetres i més llargs.\n" +"Ajusteu aquest valor per evitar que s'imprimeixin parets curtes i no " +"tancades, cosa que podria augmentar el temps d'impressió. Els valors més " +"alts eliminen més i més parets més llargues.\n" "\n" "NOTA: Les superfícies inferior i superior no es veuran afectades per aquest " -"valor per evitar buits visuals a la part exterior del model. Ajusteu " -"\"Llindar d'un sol perímetre\" a la configuració avançada següent per " -"ajustar la sensibilitat del que es considera una superfície superior. " -"L'ajustament del \"Llindar d'un sol perímetre\" només és visible si aquesta " -"opció de configuració s'estableix per sobre del valor predeterminat de 0,5 o " -"si les superfícies superiors d'un sol perímetre estan habilitades." +"valor per evitar espais visuals a l'exterior del model. Ajusteu \"Llindar " +"d'una paret\" a la configuració avançada següent per ajustar la sensibilitat " +"del que es considera una superfície superior. \"Llindar d'una paret\" només " +"és visible si aquesta configuració està per sobre del valor predeterminat de " +"0,5 o si les superfícies superiors d'una sola paret estan habilitades." msgid "First layer minimum wall width" msgstr "Amplada mínima del perímetre de la primera capa" @@ -14254,7 +17245,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Amplada del perímetre que substituirà als elements prims ( segons la mida " "mínima de l'element ) del model. Si l'amplada mínima del perímetre és més " @@ -14265,13 +17256,13 @@ msgid "Detect narrow internal solid infill" msgstr "Detectar de farciment sòlid intern estret" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"Aquesta opció detectarà automàticament una àrea de farciment sòlid intern " -"estret. Si està habilitat, s'utilitzarà un patró concèntric a l'àrea per " -"accelerar la impressió. En cas contrari, el patró rectilini s'utilitzará per " +"Aquesta opció detectarà automàticament l'àrea d'ompliment sòlid intern " +"estreta. Si està activat, s'utilitzarà un patró concèntric per a l'àrea per " +"accelerar la impressió. En cas contrari, el patró rectilini s'utilitza per " "defecte." msgid "invalid value " @@ -14286,29 +17277,152 @@ msgstr "amplada de línia massa gran " msgid " not in range " msgstr " fora de rang " +msgid "Export 3MF" +msgstr "Exportar 3MF" + +msgid "Export project as 3MF." +msgstr "Exportar projecte a 3MF." + +msgid "Export slicing data" +msgstr "Exportar dades de laminació" + +msgid "Export slicing data to a folder." +msgstr "Exportar les dades de laminació a una carpeta." + +msgid "Load slicing data" +msgstr "Carregar dades de laminació" + +msgid "Load cached slicing data from directory." +msgstr "Carregar les dades de laminació a la memòria cau des del directori" + +msgid "Export STL" +msgstr "Exportar STL" + +msgid "Export the objects as single STL." +msgstr "Exportar tots els objectes com a un STL." + +msgid "Export multiple STLs" +msgstr "Exportar diversos STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Exportar els objectes com a diversos STL al directori" + +msgid "Slice" +msgstr "Llesca" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Laminar les plaques: 0-totes les plaques, i-placa i, altres-no vàlides" + +msgid "Show command help." +msgstr "Mostra l'ajuda de comandes." + +msgid "UpToDate" +msgstr "Actualitzar" + +msgid "Update the config values of 3MF to latest." +msgstr "Actualitzar els valors de configuració de 3MF a la darrera versió." + +msgid "downward machines check" +msgstr "comprovació descendent de màquines" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"comprovar si la màquina actual és compatible de manera descendent amb les " +"màquines de la llista" + +msgid "Load default filaments" +msgstr "Carregar filaments per defecte" + +msgid "Load first filament as default for those not loaded." +msgstr "Carregar el primer filament per defecte per als que no estan carregats" + msgid "Minimum save" msgstr "Guardat mínim" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "exportar 3MF amb la mida mínima." +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "recompte màxim de triangles per placa en laminar." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "temps màxim de laminació per placa en segons." + msgid "No check" msgstr "No comprovar" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "No executar cap comprovació de validesa, com ara la comprovació de " "conflictes de trajectòria al Codi-G." +msgid "Normative check" +msgstr "Comprovació normativa" + +msgid "Check the normative items." +msgstr "Comproveu els elements normatius." + +msgid "Output Model Info" +msgstr "Informació del model de sortida" + +msgid "Output the model's information." +msgstr "Emet la informació del model." + +msgid "Export Settings" +msgstr "Exportar Configuració" + +msgid "Export settings to a file." +msgstr "Exporta la configuració a un fitxer." + +msgid "Send progress to pipe" +msgstr "Envia el progrés a la canalització" + +msgid "Send progress to pipe." +msgstr "Envia el progrés a la canalització." + +msgid "Arrange Options" +msgstr "Opcions d'arranjament" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Opcions d'arranjament 0-deshabilitar, 1-habilitar, altres-auto" + +msgid "Repetition count" +msgstr "Recompte de repeticions" + +msgid "Repetition count of the whole model." +msgstr "Recompte de repeticions de tot el model" + msgid "Ensure on bed" msgstr "Assegurar a la placa" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Aixeca l'objecte per sobre del llit quan estigui parcialment a sota. " "Desactivat per defecte" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Organitzar els models subministrats en una base i combinar-los en un sol " +"model per fer accions una vegada." + +msgid "Convert Unit" +msgstr "Convertir unitat" + +msgid "Convert the units of model." +msgstr "Converteix les unitats del model" + msgid "Orient Options" msgstr "Opcions d'orientació" @@ -14318,12 +17432,90 @@ msgstr "Opcions d'orientació: 0-deshabilitar, 1-habilitar, altres-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Angle de rotació al voltant de l'eix Z en graus." +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "Rotar al voltant de l'eix Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Angle de rotació al voltant de l'eix Y en graus." +msgid "Scale the model by a float factor." +msgstr "Escala el model amb un factor flotant" + +msgid "Load General Settings" +msgstr "Carregar la configuració general" + +msgid "Load process/machine settings from the specified file." +msgstr "" +"Carregar la configuració del procés/de la màquina des del fitxer especificat" + +msgid "Load Filament Settings" +msgstr "Carregar la configuració del filament" + +msgid "Load filament settings from the specified file list." +msgstr "" +"Carregar la configuració del filament de la llista de fitxers especificada" + +msgid "Skip Objects" +msgstr "Saltar objectes" + +msgid "Skip some objects in this print." +msgstr "Omet alguns objectes en aquesta impressió" + +msgid "Clone Objects" +msgstr "Clonar objectes" + +msgid "Clone objects in the load list." +msgstr "Clonar objectes a la llista de càrrega" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"carregar la configuració del procés/màquina d'actualització des del fitxer " +"especificat en usar l'actualització" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"carregar la configuració del filament actualitzada des del fitxer " +"especificat quan utilitzeu l'actualització" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"si està activat, comproveu si la màquina actual és compatible de manera " +"descendent amb les màquines de la llista" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" +"la llista de paràmetres de la màquina ha de fer una comprovació descendent" + +msgid "Load assemble list" +msgstr "Carregar la llista de muntatge" + +msgid "Load assemble object list from config file." +msgstr "" +"Carregar la llista d'objectes de muntatge des del fitxer de configuració" + msgid "Data directory" msgstr "Directori de dades" @@ -14336,44 +17528,141 @@ msgstr "" "mantenir diferents perfils o incloure configuracions des d'un emmagatzematge " "de xarxa." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Directori de sortida" + +msgid "Output directory for the exported files." +msgstr "Directori de sortida dels fitxers exportats." + +msgid "Debug level" +msgstr "Nivell de depuració" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Defineix el nivell de registre de depuració. 0:fatal, 1:error, 2:warning, 3:" +"info, 4:debug, 5:tracejar\n" + +msgid "Enable timelapse for print" +msgstr "Activa el timelapse per a la impressió" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Si està habilitat, aquest laminat es considerarà mitjançant timelapse" + +msgid "Load custom G-code" msgstr "Carregar Codi-G personalitzat" -msgid "Load custom gcode from json" -msgstr "Carregar el Codi-G personalitzat des de json" +msgid "Load custom G-code from json." +msgstr "Carregar el Codi-G personalitzat des de json." -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "Carregar els identificadors del filament" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "Permetre diversos materials en una mateixa placa" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "Si està habilitat, l'arranjament permetrà diversos colors en una placa" + +msgid "Allow rotation when arranging" +msgstr "Permet girs en fer l'arranjament" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Si està habilitat, l'arranjament permetrà rotacions en col·locar l'objecte" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Evitar la regió de calibratge d'extrusió en fer l'arranjament" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Si està habilitat, l'arranjament evitarà la regió de calibratge d'extrusió " +"quan col·loqueu l'objecte" + +msgid "Skip modified G-code in 3MF" +msgstr "Omet els codis-g modificats en 3mf" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Omet els codis-g modificats en 3MF des de la impressora o els presets de " +"filament." + +msgid "MakerLab name" +msgstr "Nom MakerLab" + +msgid "MakerLab name to generate this 3MF." +msgstr "Nom de MakerLab per generar aquest 3MF." + +msgid "MakerLab version" +msgstr "Versió MakerLab" + +msgid "MakerLab version to generate this 3MF." +msgstr "Versió de MakerLab per generar aquest 3MF." + +msgid "Metadata name list" +msgstr "Llista de noms de metadades" + +msgid "Metadata name list added into 3MF." +msgstr "Llista de noms de metadades afegida a 3MF." + +msgid "Metadata value list" +msgstr "Llista de valors de metadades" + +msgid "Metadata value list added into 3MF." +msgstr "Llista de valors de metadades afegida a 3MF." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Permet laminar 3MF amb la versió més recent" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Permet laminar 3MF amb la versió més recent." + +msgid "Current Z-hop" msgstr "Salt-z actual" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Conté el salt-z present al principi del bloc de codi-G personalitzat." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" -"Posició de l'extrusora al començament del bloc de codi-G personalitzat. Si " -"el codi-G personalitzat es mou a un altre lloc, s'hauria d'escriure a " -"aquesta variable perquè PrusaSlicer sàpiga des d'on es mou quan recuperi el " -"control." +"Posició de l'extrusora al principi del bloc de codi G personalitzat. Si el " +"codi G personalitzat viatja a un altre lloc, hauria d'escriure a aquesta " +"variable perquè Snapmaker Orca sàpiga des d'on viatja quan recuperi el control." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -"Estat de retracció al començament del bloc de codi-G personalitzat. Si el " -"codi-G personalitzat mou l'eix de l'extrusora, hauria d'escriure a aquesta " -"variable perquè PrusaSlicer es retiri correctament quan recuperi el control." +"Estat de retracció al principi del bloc de codi G personalitzat. Si el codi " +"G personalitzat mou l'eix de l'extrusora, hauria d'escriure a aquesta " +"variable perquè Snapmaker Orca es retiri correctament quan recuperi el control." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Deretracció extra" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" -"En l'actualitat es preveu un cebament addicional de l'extrusora després de " -"la deretracció." +"Imprimeix extrusora addicional previst actualment després de la retirada." + +msgid "Absolute E position" +msgstr "Posició E absoluta" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Posició actual de l'eix de l'extrusora. Només s'utilitza amb l'adreçament " +"absolut d'extrusora." msgid "Current extruder" msgstr "Extrusora actual" @@ -14420,11 +17709,20 @@ msgstr "" msgid "Is extruder used?" msgstr "S'utilitza extrusora?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" -"Vector de booleans que indica si s'utilitza un extrusor donat en la " +"Vector de booleans que indica si s'utilitza una extrusora determinada a la " "impressió." +msgid "Has single extruder MM priming" +msgstr "Té una imprimació MM d'extrusora única" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"S'utilitzen les regions d'imprimació multimaterial addicionals en aquesta " +"impressió?" + msgid "Volume per extruder" msgstr "Volum per extrusora" @@ -14432,10 +17730,10 @@ msgid "Total filament volume extruded per extruder during the entire print." msgstr "" "Volum total de filament extruït per extrusora durant tota la impressió." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Nombre Total de canvis d'eina" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Nombre de canvis d'eina durant la impressió." msgid "Total volume" @@ -14491,12 +17789,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Conté una cadena amb la informació sobre quin escalat s'ha aplicat als " "objectes individuals. La indexació dels objectes es basa en zero (el primer " "objecte té índex 0).\n" -"Exemple: 'x:100% y:50% z:100'." +"Exemple: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Nom del fitxer d'entrada sense extensió" @@ -14505,14 +17803,14 @@ msgid "Source filename of the first object, without extension." msgstr "Nom del fitxer font del primer objecte, sense extensió." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "El vector té dos elements: coordenades x i y del punt. Valors en mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." +msgstr "El vector té dos elements: coordenades X i Y del punt. Valors en mm." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" -"El vector té dos elements: dimensió x i y de la caixa delimitadora. Valors " +"El vector té dos elements: dimensió X i Y de la caixa delimitadora. Valors " "en mm." msgid "First layer convex hull" @@ -14560,6 +17858,9 @@ msgstr "Hora" msgid "Minute" msgstr "Minut" +msgid "Second" +msgstr "Segon" + msgid "Print preset name" msgstr "Nom del perfil d'impressió" @@ -14588,6 +17889,16 @@ msgstr "Nom de la impressora física" msgid "Name of the physical printer used for slicing." msgstr "Nom de la impressora física utilitzada per laminar." +msgid "Number of extruders" +msgstr "Nombre d'extrusores" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Nombre total d'extrusores, independentment de si s'utilitzen a la impressió " +"actual." + msgid "Layer number" msgstr "Número de capa" @@ -14596,7 +17907,7 @@ msgstr "" "Índex de la capa actual. Basat en 1( és a dir, la primera capa és el número " "1 )." -msgid "Layer z" +msgid "Layer Z" msgstr "Capa Z" msgid "" @@ -14606,7 +17917,7 @@ msgstr "" "Alçada de la capa actual sobre el llit d'impressió, mesurada a la part " "superior de la capa." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Capa màxima Z" msgid "Height of the last layer above the print bed." @@ -14633,9 +17944,6 @@ msgstr "Generant la trajectòria de l'eina de farciment" msgid "Detect overhangs for auto-lift" msgstr "Detectar voladissos per a l'elevació automàtica" -msgid "Generating support" -msgstr "Generant suport" - msgid "Checking support necessity" msgstr "Comprovació de la necessitat de suport" @@ -14656,6 +17964,9 @@ msgstr "" "Sembla que l'objecte %s té %s. Si us plau, reorienteu l'objecte o habiliteu " "la generació de suport." +msgid "Generating support" +msgstr "Generant suport" + msgid "Optimizing toolpath" msgstr "Optimitzant la trajectòria de l'eina" @@ -14672,42 +17983,32 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "No s'utilitzarà la compensació de mida XY d'un objecte perquè també està " "pintat en colors.\n" "La compensació de mida XY no es pot combinar amb la pintura en color." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Suport: generar trajectòria d'eina a la capa %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Suport: detectar voladissos" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Suport: generar punts de contacte" -msgid "Support: propagate branches" -msgstr "Suport: propagar branques" +msgid "Loading of a model file failed." +msgstr "La càrrega d'un fitxer de model ha fallat." -msgid "Support: draw polygons" -msgstr "Suport: dibuixar polígons" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Suport: generar trajectòria d'eina" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Suport: generar polígons a la capa %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Suport: reparar forats a la capa %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Suport: propagar branques a la capa %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "El fitxer subministrat no s'ha pogut llegir perquè està buit" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14715,20 +18016,11 @@ msgstr "" "Format de fitxer desconegut. El fitxer d'entrada ha de tenir extensió .stl, ." "obj, .amf( .xml )." -msgid "Loading of a model file failed." -msgstr "La càrrega d'un fitxer de model ha fallat." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "El fitxer subministrat no s'ha pogut llegir perquè està buit" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Format de fitxer desconegut. El fitxer d'entrada ha de tenir extensió .3mf " "o .zip.amf." -msgid "Canceled" -msgstr "Cancel·lat" - msgid "load_obj: failed to parse" msgstr "load_obj: no s'ha pogut analitzar" @@ -14820,7 +18112,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Introduïu valors vàlids:\n" "Valor inicial: >= %.1f\n" @@ -14832,7 +18124,7 @@ msgid "The name cannot be empty." msgstr "El nom no pot estar buit." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "El perfil seleccionat: %s no es troba." msgid "The name cannot be the same as the system preset name." @@ -14844,6 +18136,14 @@ msgstr "El nom és el mateix que d'un altre perfil existent" msgid "create new preset failed." msgstr "s'ha produït un error en la creació d'un nou perfil." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -14865,25 +18165,20 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Aquest tipus de màquina només pot contenir 16 resultats històrics per " "broquet. Podeu suprimir els resultats de l'historial existents i, a " "continuació, iniciar el calibratge. O podeu continuar el calibratge, però no " -"podeu crear nous resultats històrics de calibratge. \n" +"podeu crear nous resultats històrics de calibratge.\n" "Encara vols continuar amb el calibratge?" -msgid "Connecting to printer..." -msgstr "Connectant amb la impressora..." - -msgid "The failed test result has been dropped." -msgstr "El resultat de la prova fallida ha estat descartat." - -msgid "Flow Dynamics Calibration result has been saved to the printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" msgstr "" -"El resultat del Calibratge de les Dinàmiques de Flux s'ha desat a la " -"impressora" #, c-format, boost-format msgid "" @@ -14895,6 +18190,13 @@ msgstr "" "guarda un dels resultats amb el mateix nom. Estàs segur que vols " "sobreescriure el resultat històric?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14903,16 +18205,27 @@ msgstr "" "Aquest tipus de màquina només pot contenir %d resultats de l'historial per " "broquet. Aquest resultat no es guardarà." +msgid "Connecting to printer..." +msgstr "Connectant amb la impressora..." + +msgid "The failed test result has been dropped." +msgstr "El resultat de la prova fallida ha estat descartat." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" +"El resultat del Calibratge de les Dinàmiques de Flux s'ha desat a la " +"impressora" + msgid "Internal Error" msgstr "Error intern" msgid "Please select at least one filament for calibration" msgstr "Seleccioneu com a mínim un filament per al calibratge" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "El resultat del calibratge del Ratio de Flux s'ha desat al perfil" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "El resultat del calibratge de velocitat volumètrica màxima s'ha desat al " "perfil" @@ -14926,18 +18239,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Hem afegit el calibratge automàtic per a diferents filaments, el qual està " -"totalment automatitzat i el resultat es guardarà a la impressora per al seu " -"ús futur. Només cal fer el calibratge en els següents casos:\n" -"1. Si introdueixes un filament nou de diferents marques/models o el filament " -"està humit;\n" -"2. Si el broquet està desgastat o es substitueix per un de nou;\n" -"3. Si es canvia la velocitat volumètrica màxima o la temperatura d'impressió " -"a la configuració del filament." msgid "About this calibration" msgstr "Sobre aquest calibratge" @@ -14989,12 +18294,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Després d'utilitzar el Calibratge de Dinàmiques de Flux, és possible que " "encara hi hagi alguns problemes d'extrusió, com ara:\n" @@ -15102,22 +18407,12 @@ msgstr "" "*Us recomanem afegir marca, material, tipus i fins i tot nivell d'humitat al " "Nom" -msgid "Failed" -msgstr "Ha fallat" - msgid "Please enter the name you want to save to printer." msgstr "Introduïu el nom que voleu assignar a la impressora." msgid "The name cannot exceed 40 characters." msgstr "El nom no pot superar els 40 caràcters." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Només es desarà un dels resultats amb el mateix nom. Estàs segur que vols " -"anul·lar els altres resultats?" - msgid "Please find the best line on your plate" msgstr "Busqueu la millor línia a la placa" @@ -15130,9 +18425,6 @@ msgstr "Valor d'entrada" msgid "Save to Filament Preset" msgstr "Desar Perfil de Filament" -msgid "Preset" -msgstr "Perfil" - msgid "Record Factor" msgstr "Factor de guardat" @@ -15169,9 +18461,6 @@ msgstr "Saltar calibratge2" msgid "flow ratio : %s " msgstr "ratio de flux : %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Trieu un bloc amb la superfície superior més llisa" - msgid "Please choose a block with smoothest top surface." msgstr "Trieu un bloc amb la superfície superior més llisa." @@ -15200,22 +18489,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Paràmetres d'impressió" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Tipus de placa" msgid "filament position" msgstr "posició del filament" -msgid "External Spool" -msgstr "Bobina Externa" - msgid "Filament For Calibration" msgstr "Filament per al Calibratge" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Consells per al material de calibratge: \n" "- Materials que poden compartir la mateixa temperatura de llit\n" @@ -15236,9 +18540,23 @@ msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" "TPU no és compatible amb el Calibratge Automàtic de Dinàmiques de Flux." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Connectant amb la impressora" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Des del valor k" @@ -15258,6 +18576,9 @@ msgstr "Des de la Velocitat Volumètrica" msgid "To Volumetric Speed" msgstr "A la Velocitat Volumètrica" +msgid "Are you sure you want to cancel this print?" +msgstr "Estàs segur que vols cancel·lar aquesta impressió?" + msgid "Flow Dynamics Calibration Result" msgstr "Resultat del Calibratge de Dinàmiques de Flux" @@ -15286,6 +18607,13 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Editeu el Calibratge de Dinàmiques de Flux" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "Calibratge de Dinàmiques de Flux" @@ -15295,6 +18623,12 @@ msgstr "D’acord" msgid "The filament must be selected." msgstr "S'ha de seleccionar el filament." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Cerca de xarxa" @@ -15330,15 +18664,12 @@ msgstr "" msgid "PA Calibration" msgstr "Calibratge PA( Pressure Advance )" -msgid "DDE" -msgstr "DDE( Direct Drive Extruder )" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Tipus d'extrusora" +msgid "DDE" +msgstr "DDE( Direct Drive Extruder )" + msgid "PA Tower" msgstr "Torre PA( Pressure Advance )" @@ -15357,14 +18688,32 @@ msgstr "Final PA( Pressure Advance ): " msgid "PA step: " msgstr "Pas de PA( Pressure Advance ): " +msgid "Accelerations: " +msgstr "Acceleracions: " + +msgid "Speeds: " +msgstr "Velocitats: " + msgid "Print numbers" msgstr "Imprimir números" +msgid "Comma-separated list of printing accelerations" +msgstr "Llista d'acceleracions d'impressió separades per comes" + +msgid "Comma-separated list of printing speeds" +msgstr "Llista de velocitats d'impressió separades per comes" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Introduïu valors vàlids:\n" "Inici PA( Pressure Advance ): >= 0,0\n" @@ -15374,6 +18723,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Calibratge de temperatura" +msgid "Filament type" +msgstr "Tipus de filament" + msgid "PLA" msgstr "PLA" @@ -15395,9 +18747,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Tipus de filament" - msgid "Start temp: " msgstr "Temperatura Inicial: " @@ -15407,16 +18756,15 @@ msgstr "Temperatura final: " msgid "Temp step: " msgstr "Pas de temperatura: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Introduïu valors vàlids:\n" -"Temperatura inicial: <= 350\n" -"Temperatura final: >= 170\n" -"Temperatura inicial > Temperatura final + 5 )" msgid "Max volumetric speed test" msgstr "Prova de velocitat volumètrica màxima" @@ -15427,14 +18775,14 @@ msgstr "Velocitat volumètrica incial: " msgid "End volumetric speed: " msgstr "Velocitat volumètrica final: " -msgid "step: " -msgstr "pas: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Introduïu valors vàlids:\n" "Inici > 0 \n" @@ -15450,11 +18798,14 @@ msgstr "Velocitat d'inici: " msgid "End speed: " msgstr "Velocitat final: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Introduïu valors vàlids:\n" "Inici > 10 \n" @@ -15467,10 +18818,131 @@ msgstr "Longitud de la retracció d'inici: " msgid "End retraction length: " msgstr "Longitud de la retracció final: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Enviar el Codi-G al amfitrió( host ) d'impressió" msgid "Upload to Printer Host with the following filename:" @@ -15518,18 +18990,37 @@ msgstr "Cancel·lar selecció" msgid "Show error message" msgstr "Mostra missatge d'error" -msgid "Enqueued" +msgid "Queued" msgstr "A la cua" msgid "Uploading" msgstr "Pujant" -msgid "Cancelling" +msgid "Canceling" msgstr "Cancel·lant" msgid "Error uploading to print host" msgstr "Error en pujar a la impressora" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"El tipus de llit seleccionat no coincideix amb el fitxer. Si us plau, " +"confirmeu abans de començar la impressió." + +msgid "Time-lapse" +msgstr "Time-lapse" + +msgid "Heated Bed Leveling" +msgstr "Nivell de llit calefactat" + +msgid "Textured Build Plate (Side A)" +msgstr "Placa de construcció amb textura (costat A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Placa de construcció llisa (costat B)" + msgid "Unable to perform boolean operation on selected parts" msgstr "No es pot realitzar una operació booleana amb les peces seleccionades" @@ -15590,14 +19081,14 @@ msgstr "Versió del Sistema:" msgid "DNS Server:" msgstr "Servidor DNS:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Prova Snapmaker Orca (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Prova Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Prova Bing.com" +msgid "Test bing.com" +msgstr "Prova bing.com" msgid "Test bing.com:" msgstr "Prova bing.com:" @@ -15663,7 +19154,7 @@ msgstr "" "personalitzat." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" o \"Genèric\" no es poden utilitzar com a proveïdor de filaments " "personalitzats." @@ -15672,9 +19163,8 @@ msgid "Filament type is not selected, please reselect type." msgstr "" "El tipus de filament no està seleccionat, torneu a seleccionar el tipus." -msgid "Filament serial is not inputed, please input serial." -msgstr "" -"No s'ha introduït el número de sèrie del filament, si us plau, introduïu-lo." +msgid "Filament serial is not entered, please enter serial." +msgstr "No s'ha introduït la sèrie del filament, introduïu la sèrie." msgid "" "There may be escape characters in the vendor or serial input of filament. " @@ -15689,7 +19179,7 @@ msgstr "" "Totes les entrades de proveïdor personalitzat o de números de sèrie són " "espais. Si us plau, torneu a introduir-los." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "El proveïdor no pot ser un número. Si us plau, torneu a introduir-lo." msgid "" @@ -15700,11 +19190,11 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"El nom de Filament %s que heu creat ja existeix. \n" +"El nom de Filament %s que heu creat ja existeix.\n" "Si continueu creant-lo, el perfil creat es mostrarà amb el seu nom complet. " "Vols continuar?" @@ -15721,11 +19211,11 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Canviaríem el nom dels perfils seleccionats com a \"Proveïdor Tipus " -"Número_de_Sèrie @impressora\". \n" +"Número_de_Sèrie @impressora\".\n" "Per afegir perfils per a més impressores, aneu a la selecció d'impressora" msgid "Create Printer/Nozzle" @@ -15749,21 +19239,27 @@ msgstr "Importar Perfil" msgid "Create Type" msgstr "Crea un Tipus" -msgid "The model is not found, place reselect vendor." -msgstr "El model no s'ha trobat, torneu a triar proveïdor." - -msgid "Select Model" -msgstr "Seleccionar Model" +msgid "The model was not found, please reselect vendor." +msgstr "No s'ha trobat el model, torneu a seleccionar el proveïdor." msgid "Select Printer" msgstr "Seleccionar Impressora" +msgid "Select Model" +msgstr "Seleccionar Model" + msgid "Input Custom Model" msgstr "Introduir Model Personalitzat" msgid "Can't find my printer model" msgstr "No es troba el model d'impressora" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Rectangle" @@ -15773,15 +19269,9 @@ msgstr "Espai Imprimible" msgid "Hot Bed STL" msgstr "STL del Llit" -msgid "Load stl" -msgstr "Carregar stl" - msgid "Hot Bed SVG" msgstr "SVG del Llit" -msgid "Load svg" -msgstr "Carregar svg" - msgid "Max Print Height" msgstr "Alçada Màxima d'Impressió" @@ -15794,17 +19284,18 @@ msgstr "" "S'ha produït una excepció obtenint la mida del fitxer, si us plau, torneu a " "importar-lo." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "No es troba la ruta predeterminada, torneu a seleccionar el proveïdor." msgid "The printer model was not found, please reselect." msgstr "No s'ha trobat el model d'impressora, torneu a seleccionar." -msgid "The nozzle diameter is not found, place reselect." -msgstr "El diàmetre del broquet no s'ha trobat, torneu a seleccionar-lo." +msgid "The nozzle diameter was not found, please reselect." +msgstr "No es troba el diàmetre del broquet, torneu a seleccionar-lo." -msgid "The printer preset is not found, place reselect." -msgstr "El perfil de la impressora no s'ha trobat, torneu a seleccionar-lo." +msgid "The printer preset was not found, please reselect." +msgstr "" +"No s'ha trobat el valor predefinit de la impressora, torneu a seleccionar-lo." msgid "Printer Preset" msgstr "Perfil d'Impressora" @@ -15818,9 +19309,6 @@ msgstr "Deseleccionar-ho tot" msgid "Process Preset Template" msgstr "Plantilla de Perfil de Processament" -msgid "Back Page 1" -msgstr "Tornar a la Pàgina 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -15835,10 +19323,6 @@ msgstr "" "Heu introduït una entrada il·legal a la secció d'àrea imprimible de la " "primera pàgina. Comproveu-ho abans de crear-lo." -msgid "The custom printer or model is not inputed, place input." -msgstr "" -"La impressora o el model personalitzats no s'han introduït, introduïu-lo." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15872,17 +19356,17 @@ msgstr "" "següent:\n" "\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "El proveïdor no es troba, torneu a seleccionar-ne un." msgid "Current vendor has no models, please reselect." msgstr "El proveïdor actual no té models, torneu a seleccionar." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"No heu seleccionat el proveïdor i el model o n heu introduït el proveïdor i " +"No heu seleccionat el proveïdor i el model ni heu introduït el proveïdor i " "el model personalitzats." msgid "" @@ -15907,10 +19391,18 @@ msgid "" msgstr "" "Encara no heu seleccionat la impressora per substituir el broquet, trieu-la." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Èxit Creant Impressora" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Èxit Crear Filament" msgid "Printer Created" @@ -15939,14 +19431,14 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "L'Orca ha detectat que la funció de sincronització de perfils no està " "habilitada, cosa que pot provocar una configuració de filament incorrecta a " -"la pàgina Dispositiu. \n" +"la pàgina Dispositiu.\n" "Feu clic a \"Sincronitzar els perfils d'usuari\" per habilitar la funció de " "sincronització." @@ -15998,20 +19490,27 @@ msgstr "" "Si no, s'afegirà un sufix de temps i podeu modificar el nom després de la " "creació." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "La Impressora i tots els perfils de filament&processament que pertanyen a la " -"impressora. \n" +"impressora.\n" "Es pot compartir amb altres persones." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Conjunt de perfils de filament de l'usuari. \n" -"Es pot compartir amb altres persones." +"Conjunt predefinit de filaments de l'usuari.\n" +"Es pot compartir amb els altres." msgid "" "Only display printer names with changes to printer, filament, and process " @@ -16075,7 +19574,7 @@ msgstr "" "Nota: Si se suprimeix l'únic perfil sota aquest filament, el filament se " "suprimirà en sortir del diàleg." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "Els perfils heretats per altres perfils no es poden suprimir" msgid "The following presets inherits this preset." @@ -16086,6 +19585,15 @@ msgstr[1] "Els següents perfils hereten d'aquest perfil." msgid "Delete Preset" msgstr "Suprimir Perfil" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Esteu segur que voleu suprimir el perfil seleccionat?\n" +"Si el perfil correspon a un filament que s'utilitza actualment a la " +"impressora, restabliu la informació del filament per a aquesta ranura." + msgid "Are you sure to delete the selected preset?" msgstr "Esteu segur que voleu suprimir el perfil seleccionat?" @@ -16095,16 +19603,13 @@ msgstr "Suprimir perfil" msgid "+ Add Preset" msgstr "+ Afegeix perfil" -msgid "Delete Filament" -msgstr "Suprimeix el Filament" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Se suprimirien tots els perfils de filament que pertanyen a aquest " -"filament. \n" +"filament.\n" "Si esteu utilitzant aquest filament a la impressora, restabliu la informació " "del filament per a aquesta ranura." @@ -16139,19 +19644,34 @@ msgid "Daily Tips" msgstr "Consells diaris" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "broquet memoritzat: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"El diàmetre del broquet del perfil no és coherent amb el diàmetre del " -"broquet memoritzat. Has canviat el broquet recentment?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*El material d'impressió %s amb %s podria causar danys al broquet" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "És necessari que seleccioneu una impressora" @@ -16159,6 +19679,35 @@ msgstr "És necessari que seleccioneu una impressora" msgid "The start, end or step is not valid value." msgstr "L'inici, el final o el pas no tenen un valor vàlid." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -16183,9 +19732,6 @@ msgstr "Èxit!" msgid "Are you sure to log out?" msgstr "Estàs segur de tancar sessió?" -msgid "Refresh Printers" -msgstr "Refrescar Impressores" - msgid "View print host webui in Device tab" msgstr "Veure el host d'impressió webui a la pestanya Dispositiu" @@ -16234,22 +19780,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Tipus d'amfitrió( host ) d'impressió no coincident: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "La connexió a Astrobox funciona correctament." msgid "Could not connect to AstroBox" msgstr "No s'ha pogut connectar a AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Nota: Es requereix com a mínim la versió d'AstroBox 1.1.0." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "La connexió amb Duet funciona correctament." msgid "Could not connect to Duet" msgstr "No s'ha pogut connectar amb Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "S'ha produït un error desconegut" msgid "Wrong password" @@ -16261,7 +19807,7 @@ msgstr "No s'han pogut obtenir recursos per crear una connexió nova" msgid "Upload not enabled on FlashAir card." msgstr "Pujada no activada a targeta FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" "La connexió a FlashAir funciona correctament i la pujada està habilitada." @@ -16275,28 +19821,28 @@ msgstr "" "Nota: Requereix FlashAir amb firmware 2.00.02 o posterior i la funció de " "pujada activada." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "La connexió amb MKS funciona correctament." msgid "Could not connect to MKS" msgstr "No s'ha pogut connectar amb MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "La connexió amb OctoPrint funciona correctament." msgid "Could not connect to OctoPrint" msgstr "No s'ha pogut connectar a OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Nota: Es requereix com a mínim la versió d'OctoPrint 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "La connexió a Prusa SL1 / SL1S funciona correctament." msgid "Could not connect to Prusa SLA" msgstr "No s'ha pogut connectar amb Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "La connexió amb PrusaLink funciona correctament." msgid "Could not connect to PrusaLink" @@ -16320,19 +19866,19 @@ msgstr "%1% : no hi ha espai lliure" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "La pujada ha fallat. No s'ha trobat cap emmagatzematge adequat a %1%." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "La connexió a Prusa Connect funciona correctament." msgid "Could not connect to Prusa Connect" msgstr "No s'ha pogut connectar a Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "La connexió amb Repetier funciona correctament." msgid "Could not connect to Repetier" msgstr "No s'ha pogut connectar amb Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Nota: Cal la versió 0.90.0 de Repetier com a mínim." #, boost-format @@ -16364,8 +19910,8 @@ msgstr "" "Error: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Té una alçada de capa petita i produeix línies de capa gairebé " "insignificants i una alta qualitat d'impressió. És adequat per a la majoria " @@ -16373,8 +19919,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té " "velocitats i acceleracions més baixes, i el patró de farciment poc dens és " @@ -16383,8 +19929,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " "alçada de capa lleugerament més gran i resulta en línies de capa gairebé " @@ -16392,8 +19938,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " "alçada de capa més gran i resulta en línies de capa lleugerament visibles, " @@ -16401,18 +19946,15 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " -"alçada de capa més petita i resulta en línies de capes gairebé invisibles i " -"una qualitat d'impressió més alta, però un temps d'impressió més curt." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té línies " "de capa més petites, velocitats i acceleracions més baixes, i el patró de " @@ -16421,19 +19963,16 @@ msgstr "" "d'impressió molt més llarg." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " -"alçada de capa més petita i produeix línies de capa mínimes i una qualitat " -"d'impressió més alta, però un temps d'impressió més curt." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té línies " "de capa més petites, velocitats i acceleracions més baixes, i el patró de " @@ -16442,8 +19981,8 @@ msgstr "" "llarg." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Té una alçada general de capa, i produeix línies de capa i qualitat " "d'impressió generals. És adequat per a la majoria dels casos d'impressió " @@ -16451,8 +19990,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té més " "bucles de paret i una densitat de farciment més gran. Això es tradueix en " @@ -16461,8 +20000,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més gran i produeix línies de capa més aparents i una " @@ -16471,8 +20010,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més gran i produeix línies de capa més aparents i una " @@ -16480,8 +20019,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més petita i produeix línies de capa menys aparents i una " @@ -16490,8 +20029,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més petita, velocitats i acceleració més baixes, i el patró " @@ -16501,8 +20040,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més petita i produeix línies de capa gairebé insignificants i " @@ -16511,8 +20050,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més petita, velocitats i acceleració més baixes, i el patró " @@ -16522,24 +20061,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,4 mm, té una " "alçada de capa més petita i produeix línies de capa gairebé insignificants i " "un temps d'impressió més llarg." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Té una gran alçada de capa i produeix línies de capa aparents i qualitat " "d'impressió i temps d'impressió ordinaris." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,6 mm, té més " "bucles de paret i una densitat de farciment més gran. Per tant, es tradueix " @@ -16548,8 +20086,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,6 mm, té una " "alçada de capa més gran i produeix línies de capa més aparents i una " @@ -16558,8 +20096,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,6 mm, té una " "alçada de capa més gran i produeix línies de capa molt més aparents i una " @@ -16568,8 +20106,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,6 mm, té una " "alçada de capa més petita i produeix línies de capa menys aparents i una " @@ -16577,45 +20115,34 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,6 mm, té una " "alçada de capa més petita i produeix línies de capa menys aparents i una " "qualitat d'impressió més alta, però un temps d'impressió més llarg." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Té una alçada de capa molt gran i produeix línies de capa molt aparents, " -"baixa qualitat d'impressió i temps d'impressió general." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " -"alçada de capa més gran i produeix línies de capa molt aparents i una " -"qualitat d'impressió molt menor, però un temps d'impressió més curt en " -"alguns casos d'impressió." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " -"alçada de capa molt més gran, i produeix línies de capa extremadament " -"aparents i una qualitat d'impressió molt menor, però un temps d'impressió " -"molt més curt en alguns casos d'impressió." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " "alçada de capa lleugerament més petita i produeix línies de capa " @@ -16625,13 +20152,320 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Sense AMS" + +msgid "There is no device available to send printing." +msgstr "No hi ha cap dispositiu disponible per enviar la impressió." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "El nombre d'impressores en ús simultàniament no pot ser igual a 0." + +msgid "Use External Spool" +msgstr "Utilitzar la Bobina Externa" + +msgid "Select Printers" +msgstr "Seleccionar Impressores" + +msgid "Device Name" +msgstr "Nom del dispositiu" + +msgid "Device Status" +msgstr "Estat del dispositiu" + +msgid "AMS Status" +msgstr "Estat AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Seleccioneu aquí els dispositius que voleu gestionar (fins a 6 dispositius)" + +msgid "Printing Options" +msgstr "Opcions d'Impressió" + +msgid "Bed Leveling" +msgstr "Anivellament del llit" + +msgid "Flow Dynamic Calibration" +msgstr "Calibratge de Dinàmiques de Flux" + +msgid "Send Options" +msgstr "Opcions d'Enviament" + +msgid "Send to" +msgstr "Enviar a" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"impressores al mateix temps. (Depèn de quants dispositius es puguin escalfar " +"alhora.)" + +msgid "Wait" +msgstr "Espereu" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minut cada lot. (Depèn del temps que es trigui a completar la calefacció.)" + +msgid "Task Sending" +msgstr "Enviant Tasca" + +msgid "Task Sent" +msgstr "Tasca enviada" + +msgid "Edit multiple printers" +msgstr "Editar diverses impressores" + +msgid "Select connected printers (0/6)" +msgstr "Seleccionar impressores connectades (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Seleccionar Impressores Connectades (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "El nombre màxim d'impressores que es poden seleccionar és de %d" + +msgid "No task" +msgstr "Sense tasca" + +msgid "Edit Printers" +msgstr "Editar Impressores" + +msgid "Task Name" +msgstr "Nom de la tasca" + +msgid "Actions" +msgstr "Accions" + +msgid "Task Status" +msgstr "Estat de la tasca" + +msgid "Sent Time" +msgstr "Temps d'Enviament" + +msgid "There are no tasks to be sent!" +msgstr "No hi ha tasques per enviar!" + +msgid "No historical tasks!" +msgstr "Sense tasques històriques!" + +msgid "Upgrading" +msgstr "Actualitzant" + +msgid "syncing" +msgstr "sincronitzant" + +msgid "Printing Finish" +msgstr "Finalitzar Impressió" + +msgid "Printing Failed" +msgstr "Impressió Fallida" + +msgid "Printing Pause" +msgstr "Pausar Impressió" + +msgid "Pending" +msgstr "Pendent" + +msgid "Sending" +msgstr "Enviant" + +msgid "Sending Finish" +msgstr "Finalitzar Enviament" + +msgid "Sending Cancel" +msgstr "Cancel·lar Enviament" + +msgid "Sending Failed" +msgstr "Enviament Fallit" + +msgid "Print Success" +msgstr "Impressió Exitosa" + +msgid "Print Failed" +msgstr "Impressió Fallida" + +msgid "Removed" +msgstr "Eliminat" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " -"alçada de capa més petita i produeix línies de capa menys però encara " -"aparents i una qualitat d'impressió lleugerament superior, però un temps " -"d'impressió més llarg en alguns casos d'impressió." msgid "Connected to Obico successfully!" msgstr "Connectat amb Obico amb èxit!" @@ -16656,11 +20490,11 @@ msgstr "" "No s'ha enllaçat el compte de SimplyPrint. Aneu a Opcions de Connexió per " "configurar-lo." -msgid "Connection to Flashforge works correctly." -msgstr "La connexió amb Flashforge funciona correctament." +msgid "Serial connection to Flashforge is working correctly." +msgstr "" -msgid "Could not connect to Flashforge" -msgstr "No s'ha pogut connectar a Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "" msgid "The provided state is not correct." msgstr "L'estat proporcionat no és correcte." @@ -16673,9 +20507,114 @@ msgstr "" "Alguna cosa inesperada ha passat en intentar iniciar sessió, torneu-ho a " "provar." -msgid "User cancelled." +msgid "User canceled." msgstr "Usuari cancel·lat." +msgid "Head diameter" +msgstr "Diàmetre del cap" + +msgid "Max angle" +msgstr "Angle màxim" + +msgid "Detection radius" +msgstr "Radi de detecció" + +msgid "Remove selected points" +msgstr "Elimina els punts seleccionats" + +msgid "Remove all" +msgstr "Elimina- ho tot" + +msgid "Auto-generate points" +msgstr "Generar punts automàticament" + +msgid "Add a brim ear" +msgstr "Afegir una orella de Vora d'Adherència" + +msgid "Delete a brim ear" +msgstr "Suprimir la Vora d'Adherència" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "Ajusta la vista en secció" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Advertència: el tipus de Vora d'Adherència no està configurat com a \"pintat" +"\", les orelles de la Vora d'Adherència no tindran efecte!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " orelles de la Vora d'Adherència invàlides" + +msgid "Brim Ears" +msgstr "Orelles de la Vora d'Adherència" + +msgid "Please select single object." +msgstr "Seleccioneu un sol objecte." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16756,11 +20695,11 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Com utilitzar les Dreceres de Teclat\n" "Sabíeu que Snapmaker Orca ofereix una àmplia gamma de dreceres de teclat i " -"operacions en escenes 3D." +"operacions en escenes 3D?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16803,7 +20742,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Ordenació Automàtica\n" "Sabies que pots ordenar automàticament tots els objectes del teu projecte?" @@ -16812,7 +20751,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Auto-Orientació\n" "Sabies que pots rotar objectes amb un simple clic a una orientació òptima " @@ -16993,7 +20932,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Vora d'Adherència per a una millor subjecció\n" @@ -17005,7 +20944,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Definir paràmetres per a múltiples objectes\n" "Sabíeu que podeu establir paràmetres de laminació per a tots els objectes " @@ -17022,8 +20961,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Neteja al suport/objectes/farciment\n" "Sabies que pots estalviar filament desaprofitat purgant-lo al suport/" @@ -17039,18 +20978,19 @@ msgstr "" "Sabíeu que podeu utilitzar més bucles de perímetre i una densitat de " "farciment més alta per millorar la resistència del model?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Quan cal imprimir amb la porta de la impressora oberta\n" "Sabíeu que obrir la porta de la impressora pot reduir la probabilitat " "d'obstrucció de l'extrusora/broquet en imprimir filaments a baixa " -"temperatura amb una temperatura de cambra més alta. Més informació al " +"temperatura amb una temperatura de cambra més alta? Més informació al " "respecte a la Wiki." #: resources/data/hints.ini: [hint:Avoid warping] @@ -17058,12 +20998,1355 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Evitar la deformació( warping )\n" "Sabíeu que quan imprimiu materials propensos a deformar-se, com ara l'ABS, " "augmentar adequadament la temperatura del llit pot reduir la probabilitat de " -"deformació." +"deformació?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Alçada de Capa Adaptativa" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Si activeu aquesta opció, l'alçada de la capa de suport en arbre, excepte " +#~ "la primera, es calcularà automàticament " + +#~ msgid "AMS not connected" +#~ msgstr "AMS no connectat" + +#~ msgid "Ext Spool" +#~ msgstr "Bobina Ext" + +#~ msgid "Guide" +#~ msgstr "Guiar" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Calibrant AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "S'ha produït un problema durant el calibratge. Feu clic per veure la " +#~ "solució." + +#~ msgid "Calibrate again" +#~ msgstr "Calibrar de nou" + +#~ msgid "Cancel calibration" +#~ msgstr "Cancel·la el calibratge" + +#~ msgid "Feed Filament" +#~ msgstr "Carregar Filament" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Cal inserir una targeta SD abans d'imprimir mitjançant LAN." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Cal inserir una targeta SD abans d'enviar a la impressora." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Nota: Només es poden seleccionar les ranures AMS carregades amb el mateix " +#~ "tipus de material." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Si hi ha dos filaments idèntics en AMS, s'habilitarà la còpia de " +#~ "seguretat del filament AMS.\n" +#~ "( Actualment només admet el subministrament automàtic de consumibles amb " +#~ "la mateixa marca, tipus de material i color )" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "L'AMS estimarà la capacitat restant del filament de Bambu després " +#~ "d'actualitzar la informació del filament. Durant la impressió, la " +#~ "capacitat restant s'actualitzarà automàticament." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "La temperatura mínima recomanada és inferior a 190 °C o la màxima " +#~ "recomanada és superior a 300 °C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "El mode espiral només funciona quan els bucles de perímetre és 1, el " +#~ "suport està desactivat, les capes superiors de l'intèrpret d'ordres són " +#~ "0, la densitat de farciment escassa és 0 i el tipus timelapse és " +#~ "tradicional." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Escombrat en XY en mode mecànic" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausa a causa de l'esgotament del filament" + +#~ msgid "Heating hotend" +#~ msgstr "Escalfant broquet" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Calibrant extrusió" + +#~ msgid "Printing was paused by the user" +#~ msgstr "L'usuari ha posat en pausa la impressió" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pausa en caure la coberta frontal" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Calibrant el flux d'extrusió" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "" +#~ "En pausa a causa d'un mal funcionament de la temperatura del broquet" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "" +#~ "En pausa a causa d'un mal funcionament de la temperatura del llit de " +#~ "calefactat" + +#~ msgid "Skip step pause" +#~ msgstr "Omet la pausa del pas" + +#~ msgid "Motor noise calibration" +#~ msgstr "Calibratge de soroll del motor" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "En pausa a causa de la pèrdua de l'AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Pausat a causa de la baixa velocitat del ventilador de dissipació de calor" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "En pausa a causa d'un error de control de temperatura de la cambra" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pausat pel G-code inserit per l'usuari" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pausa per detecció de broquet cobert de filament" + +#~ msgid "Cutter error pause" +#~ msgstr "Pausa d'error de tallador" + +#~ msgid "First layer error pause" +#~ msgstr "Pausa d'error de la primera capa" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pausa d'obstrucció del broquet" + +#~ msgid "Fatal" +#~ msgstr "Fatal" + +#~ msgid "Serious" +#~ msgstr "Seriós" + +#~ msgid "Common" +#~ msgstr "Comú" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "La temperatura actual de la cambra o la temperatura de la cambra objectiu " +#~ "supera els 45 °C. Per evitar l'obstrucció de l'extrusora, no es permet " +#~ "carregar filaments de baixa temperatura ( PLA / PETG / TPU )." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "El filament de baixa temperatura ( PLA/PETG/TPU ) está carregat a " +#~ "l'extrusor. Per evitar l'obstrucció de l'extrusora, no es permet establir " +#~ "la temperatura de la cambra per sobre dels 45 °C." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF no és compatible amb AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Un objecte està col·locat sobre el límit de la placa o supera el límit " +#~ "d'alçada.\n" +#~ "Resoleu el problema movent-lo totalment sobre o fora de la placa i " +#~ "confirmant que l'alçada es troba dins del volum de construcció." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "El podeu trobar a \"Configuració > Xarxa > Codi de connexió\"\n" +#~ "a la impressora, tal com es mostra a la figura:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "L'exploració de fitxers a la targeta SD no és compatible amb el firmware " +#~ "actual. Actualitzeu el firmware de la impressora." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Comproveu si la targeta SD està inserida a la impressora.\n" +#~ "Si encara no es pot llegir, podeu provar de formatar la targeta SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "L'exploració de fitxers a la targeta SD no és compatible amb el mode " +#~ "només LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Emmagatzematge no disponible, inseriu la targeta SD." + +#~ msgid "Cham" +#~ msgstr "Cambra" + +#~ msgid "Still unload" +#~ msgstr "Encara descarregat" + +#~ msgid "Still load" +#~ msgstr "Encara carregat" + +#~ msgid "Can't start this without SD card." +#~ msgstr "No es pot iniciar sense la targeta SD." + +#~ msgid "Update" +#~ msgstr "Actualitzar" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "La sensibilitat de la pausa és" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Sense filaments AMS. Seleccioneu una impressora a la pàgina \"Dispositiu" +#~ "\" per carregar informació AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Sincronitzar filaments amb AMS eliminarà tots els perfils de filament i " +#~ "colors. Voleu continuar?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Ja heu fet una sincronització, voleu sincronitzar només els canvis o " +#~ "tornar a sincronitzar-los tots?" + +#~ msgid "Sync" +#~ msgstr "Sincronitzar" + +#~ msgid "Resync" +#~ msgstr "Resincronitzar" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Hi ha alguns filaments desconeguts assignats al perfil genèric. " +#~ "Actualitzeu Snapmaker Orca o reinicieu Snapmaker Orca per comprovar si hi ha " +#~ "una actualització dels perfils del sistema." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Esteu segur que voleu emmagatzemar els SVG originals amb les seves rutes " +#~ "locals al fitxer 3MF?\n" +#~ "Si premeu \"NO\", tots els SVG del projecte ja no es podran editar més." + +#~ msgid "Private protection" +#~ msgstr "Protecció privada" + +#~ msgid "General Settings" +#~ msgstr "Configuració general" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Mostrar la notificació de \"Consell del dia\" després de l'inici" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Si s'activa, es mostren consells útils a l'inici." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Volums de purga: calcular automàticament cada vegada que canvia el color." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Si està activat, fa els càlculs automàticament cada vegada que canviï el " +#~ "color." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Volums de purga: calcular automàticament cada vegada que canvia el " +#~ "filament." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Si està activat, fa els càlculs automàticament cada vegada que canvia el " +#~ "filament" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Organitza automàticament la placa després de la clonació d'objectes" + +#~ msgid "Network" +#~ msgstr "Xarxa" + +#~ msgid "User Sync" +#~ msgstr "Sincronització d'usuari" + +#~ msgid "System Sync" +#~ msgstr "Sincronitzar del Sistema" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Associeu URLs a Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "cada" + +#~ msgid "Downloads" +#~ msgstr "Descàrregues" + +#~ msgid "Dark Mode" +#~ msgstr "Mode fosc" + +#~ msgid "Home page and daily tips" +#~ msgstr "Pàgina d'inici i consells diaris" + +#~ msgid "Show home page on startup" +#~ msgstr "Mostra la pàgina d'inici a l'inici" + +#~ msgid "Please choose the filament color" +#~ msgstr "Si us plau, tria el color del filament" + +#~ msgid "Send print job to" +#~ msgstr "Enviar treball d'impressió a" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "El filament %s supera el nombre de ranures AMS. Actualitzeu el firmware " +#~ "de la impressora per a que admeti l'assignació de ranures AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "El filament supera el nombre de ranures AMS. Actualitzeu el firmware de " +#~ "la impressora per a que admeti l'assignació de ranures AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "S'han establert mapeigs de filaments a ranures AMS. Podeu fer clic a un " +#~ "filament de dalt per canviar la vostra assignació de ranura AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Feu clic a cada filament de dalt per especificar la vostra assignació de " +#~ "ranura AMS abans d'enviar el treball d'impressió" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "El firmware de la impressora només admet el mapejat seqüencial de " +#~ "filament => ranura AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Cal inserir una targeta SD abans d'imprimir." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Cal inserir una targeta SD per gravar el timelapse." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "broquet memoritzat: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "El diàmetre del broquet del perfil no és coherent amb el diàmetre del " +#~ "broquet memoritzat. Si heu canviat el broquet darrerament, aneu a " +#~ "Dispositiu > Parts de la impressora per canviar la configuració." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "La impressió de material a alta temperatura (material %s) amb %s pot " +#~ "causar danys al broquet" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Connectant amb la impressora. No es pot cancel·lar durant el procés de " +#~ "connexió." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Precaució d'ús! El calibratge del flux a la Base PEI amb Textura pot " +#~ "fallar a causa de la superfície irregular." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Calibratge automàtic de flux mitjançant Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Enviar a la targeta SD de la impressora" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Cal inserir una targeta SD abans d'enviar-lo a la impressora." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "" +#~ "La impressora no admet l'enviament a la targeta SD de la impressora." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "El recompte de colors ha d'estar en rang [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Color del filament predeterminat:" + +#~ msgid "Quick set:" +#~ msgstr "Configuració ràpida:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Afegiu extrusora consumible després dels extrusors existents." + +#~ msgid "Cluster colors" +#~ msgstr "Colors del clúster" + +#~ msgid "Map Filament" +#~ msgstr "Mapejar Filament" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Nota: El color ha estat seleccionat, podeu triar D'acord \n" +#~ "per continuar-lo o ajustar-lo manualment." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Advertència:El recompte de nous afegits i \n" +#~ "Els extrusors de corrent superen els 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Calcular Automàticament" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca recalcularà els volums de purga cada vegada que canviïs el color del " +#~ "filament. Pots desactivar el càlcul automàtic a Snapmaker Orca > Preferències" + +#~ msgid "unloaded" +#~ msgstr "descarregat" + +#~ msgid "loaded" +#~ msgstr "carregat" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Des de" + +#~ msgid "To" +#~ msgstr "A" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Reprendre la impressió (defectes acceptables)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Reprendre la impressió (problema resolt)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Pas 1. Confirmeu que Snapmaker Orca i la vostra impressora estan a la " +#~ "mateixa LAN." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Pas 2. Si la IP i el codi d'accés següents són diferents dels valors " +#~ "reals de la impressora, corregiu-los." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Pas 3. Si us plau, obteniu el SN del dispositiu del lateral de la " +#~ "impressora; normalment es troba a la informació del dispositiu a la " +#~ "pantalla de la impressora." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " està massa a prop dels altres, pot haver-hi col·lisions en imprimir." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "No es poden imprimir junts múltiples filaments que tinguin una gran " +#~ "diferència de temperatura. En cas contrari, l'extrusor i el broquet es " +#~ "poden bloquejar o danyar durant la impressió" + +#~ msgid "Ironing angle" +#~ msgstr "Angle de planxat" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "El planxat angular es fa a. Un nombre negatiu desactiva aquesta funció i " +#~ "utilitza el mètode predeterminat." + +#~ msgid "Remove small overhangs" +#~ msgstr "Eliminar els voladissos petits" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Eliminar els voladissos petits que possiblement no necessiten suports." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Només es desarà un dels resultats amb el mateix nom. Estàs segur que vols " +#~ "anul·lar els altres resultats?" + +#~ msgid "External Spool" +#~ msgstr "Bobina Externa" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Introduïu valors vàlids:\n" +#~ "Temperatura inicial: <= 350\n" +#~ "Temperatura final: >= 170\n" +#~ "Temperatura inicial > Temperatura final + 5 )" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "La impressora o el model personalitzats no s'han introduït, introduïu-lo." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "broquet del perfil: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "El diàmetre del broquet del perfil no és coherent amb el diàmetre del " +#~ "broquet memoritzat. Has canviat el broquet recentment?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*El material d'impressió %s amb %s podria causar danys al broquet" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Milloreu la precisió de la carcassa ajustant l'espaiat del perímetre " +#~ "exterior. Això també millora la consistència de la capa." + +#~ msgid "Enable filament ramming." +#~ msgstr "Habilitar Moldejat de punta( Ramming ) de filament" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Roda del ratolí" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Roda del ratolí" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Maj + botó esquerre del ratolí" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Majúscules + Retorn" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Majúscules + Ratolí per pujar o baixar" + +#~ msgid "Left mouse button:" +#~ msgstr "Botó esquerre del ratolí:" + +#~ msgid "Right mouse button:" +#~ msgstr "Botó dret del ratolí:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Maj + botó esquerre del ratolí:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Maj + botó dret del ratolí:" + +#~ msgid "Recent projects" +#~ msgstr "Projectes recents" + +#~ msgid "Maximum recent projects" +#~ msgstr "Màxim projectes recents" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Màxima quantitat de projectes recents" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Maj+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Maj+G" + +#~ msgid "Shift+A" +#~ msgstr "Maj+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Maj+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Qualsevol fletxa" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Botó esquerre del ratolí" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Botó esquerre del ratolí" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Qualsevol fletxa" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Botó esquerre del ratolí" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Botó esquerre del ratolí" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Maj+Botó esquerre del ratolí" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Maj+Qualsevol fletxa" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Roda del ratolí" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Roda del ratolí" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Roda del ratolí" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Roda del ratolí" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Maj+Roda del ratolí" + +#~ msgid "Set Position" +#~ msgstr "Establir Posició" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "" +#~ "Feu clic amb el botó dret a la icona per reparar l'objecte del model" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "L'objecte final conté només una part i no es pot partir." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "°C" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Esquema de color" + +#~ msgid "Percent" +#~ msgstr "Percentatge" + +#~ msgid "Used filament" +#~ msgstr "Filament usat" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Més..." + +#~ msgid "More calibrations" +#~ msgstr "Més calibratges" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Targeta SD" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Sense targeta SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Targeta SD anormal" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "L'expulsió del dispositiu %s( %s ) ha fallat." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Aquesta opció es pot canviar més endavant a les preferències, a \"Carrega " +#~ "Comportament." + +#~ msgid "Invalid number" +#~ msgstr "Número no vàlid" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "broquet memoritzat: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Temperatura del llit quan s'instal·la la placa freda. El valor 0 " +#~ "significa que el filament no admet la impressió al Cool Plate SuperTack" + +#~ msgid "Ramming settings" +#~ msgstr "Configuració de Moldejat de punta( Ramming )" + +#~ msgid "Profile dependencies" +#~ msgstr "Dependències del perfil" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "el paquet Configuració és incompatible amb l'aplicació actual." + +#~ msgid "Total ramming time" +#~ msgstr "Temps total de moldejat de punta( ramming )" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Volum de moldejat de punta( ramming ) total" + +#~ msgid "Ramming line width" +#~ msgstr "Ample de la línia de moldejat de punta( ramming )" + +#~ msgid "Ramming line spacing" +#~ msgstr "Espai entre línies de Moldejat de punta( Ramming )" + +#~ msgid "Shift+R" +#~ msgstr "Maj+R" + +#~ msgid "resume" +#~ msgstr "reprendre" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Mode clàssic" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Activeu aquesta opció per utilitzar el mode clàssic" + +#~ msgid "Compatible machine" +#~ msgstr "Màquina compatible" + +#~ msgid "Compatible machine condition" +#~ msgstr "Condició de màquina compatible" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Condició de perfils de procés compatibles" + +#~ msgid "Default filament color" +#~ msgstr "Color del filament predeterminat" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Rotar la direcció de farciment sòlid" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Rotar la direcció de farciment sòlid 90° per a cada capa." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Model de Compensació de Flux, utilitzat per ajustar el flux per a petites " +#~ "àrees de farciment. El model s'expressa com un parell de valors separats " +#~ "per comes per a la longitud d'extrusió i els factors de correcció de " +#~ "flux, un per línia, en el següent format: \"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "La major alçada de capa imprimible per a l'extrusor. S'utilitza per " +#~ "limitar l'alçada màxima de la capa quan s'habilita l'Alçada de Capa " +#~ "Adaptativa" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "L'alçada de capa imprimible més baixa per a l'extrusor. S'utilitza per " +#~ "limitar l'alçada mínima de la capa quan s'activa l'Alçada de Capa " +#~ "Adaptativa" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Retreure a la capa superior" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Força una retracció a la capa superior. La desactivació podria evitar " +#~ "l'obstrucció en patrons molt lents amb moviments petits, com la corba de " +#~ "Hilbert" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Una certa quantitat de material en l'extrusora es tira cap enrere per " +#~ "evitar l'Ooze( goteig ) durant el llarg desplaçament. Definiu zero per " +#~ "desactivar la retracció" + +#~ msgid "Speed of retractions." +#~ msgstr "Velocitat de les retraccions" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Velocitat de recàrrega del filament a l'extrusora. Zero significa la " +#~ "mateixa velocitat amb la retracció" + +#~ msgid "Single loop draft shield" +#~ msgstr "Escut d'un sol bucle" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Limita els bucles de l'escut contra corrents d'aire a una paret després " +#~ "de la primera capa. Això és útil, en ocasions, per conservar el filament, " +#~ "però pot provocar que l'escut de corrent es deformi o es trenqui." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Espaiat de les línies de la interfície. Zero significa interfície sòlida" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Gruix mínim dels elements fins. Els elements del model que siguin més " +#~ "prims que aquest valor no s'imprimiran, mentre que les entitats més " +#~ "gruixudes que la mida mínima s'ampliaran a l'amplada mínima del " +#~ "perímetre. S'expressa en percentatge sobre el diàmetre del broquet" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "carregar la configuració del procés/la màquina d'actualització en usar " +#~ "l'actualització" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "" +#~ "carregar la configuració del filament Uptodate quan s'utilitza UptoDate" + +#~ msgid "Downward machines settings" +#~ msgstr "configuració descendent de les màquines" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Carregar els identificadors del filament per a cada objecte" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Hem afegit el calibratge automàtic per a diferents filaments, el qual " +#~ "està totalment automatitzat i el resultat es guardarà a la impressora per " +#~ "al seu ús futur. Només cal fer el calibratge en els següents casos:\n" +#~ "1. Si introdueixes un filament nou de diferents marques/models o el " +#~ "filament està humit;\n" +#~ "2. Si el broquet està desgastat o es substitueix per un de nou;\n" +#~ "3. Si es canvia la velocitat volumètrica màxima o la temperatura " +#~ "d'impressió a la configuració del filament." + +#~ msgid "step: " +#~ msgstr "pas: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Carregar STL" + +#~ msgid "Load svg" +#~ msgstr "Carregar svg" + +#~ msgid "Back Page 1" +#~ msgstr "Tornar a la Pàgina 1" + +#~ msgid "Delete Filament" +#~ msgstr "Suprimeix el Filament" + +#~ msgid "Refresh Printers" +#~ msgstr "Refrescar Impressores" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " +#~ "alçada de capa més petita i resulta en línies de capes gairebé invisibles " +#~ "i una qualitat d'impressió més alta, però un temps d'impressió més curt." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "En comparació amb el perfil predeterminat del broquet de 0,2 mm, té una " +#~ "alçada de capa més petita i produeix línies de capa mínimes i una " +#~ "qualitat d'impressió més alta, però un temps d'impressió més curt." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Té una alçada de capa molt gran i produeix línies de capa molt aparents, " +#~ "baixa qualitat d'impressió i temps d'impressió general." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " +#~ "alçada de capa més gran i produeix línies de capa molt aparents i una " +#~ "qualitat d'impressió molt menor, però un temps d'impressió més curt en " +#~ "alguns casos d'impressió." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " +#~ "alçada de capa molt més gran, i produeix línies de capa extremadament " +#~ "aparents i una qualitat d'impressió molt menor, però un temps d'impressió " +#~ "molt més curt en alguns casos d'impressió." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "En comparació amb el perfil predeterminat del broquet de 0,8 mm, té una " +#~ "alçada de capa més petita i produeix línies de capa menys però encara " +#~ "aparents i una qualitat d'impressió lleugerament superior, però un temps " +#~ "d'impressió més llarg en alguns casos d'impressió." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "La connexió amb Flashforge funciona correctament." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "No s'ha pogut connectar a Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Establir Vora d'Adherència a \"pintat\"" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Hem afegit l'estil experimental \"Arbres Prims\" que presenta un volum de " +#~ "suport més petit però una resistència més feble.\n" +#~ "Recomanem utilitzar-lo amb: 0 capes d'interfície, 0 distància superior, 2 " +#~ "perímetres." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Per als estils \"Arbres Forts\" i \"Arbres Híbrids\", recomanem la " +#~ "configuració següent: almenys 2 capes d'interfície, almenys 0.1 mm de " +#~ "distància z superior o utilitzar materials de suport a la interfície." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Diàmetre de branca amb parets dobles" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Les branques amb una àrea més gran que l'àrea d'un cercle d'aquest " +#~ "diàmetre s'imprimiran amb parets dobles per a millorar l'estabilitat. " +#~ "Establiu aquest valor a zero per a cap paret doble." + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Suport: generar trajectòria d'eina a la capa %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Suport: detectar voladissos" + +#~ msgid "Support: propagate branches" +#~ msgstr "Suport: propagar branques" + +#~ msgid "Support: draw polygons" +#~ msgstr "Suport: dibuixar polígons" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Suport: generar trajectòria d'eina" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Suport: generar polígons a la capa %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Suport: reparar forats a la capa %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Suport: propagar branques a la capa %d" + +#~ msgid "Snapmaker Orca" +#~ msgstr "Snapmaker Orca" + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Connexió fallida [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "" +#~ "Inicialització fallida ( la connexió del Dispositiu no està preparada )!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Inicialització fallida (emmagatzematge no disponible, inseriu la targeta " +#~ "SD.)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Inicialització fallida ( %s )!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "" +#~ "S'ha produït un error en la Connexió de Xarxa LAN ( Enviant un fitxer " +#~ "d'impressió )" + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Pas 3: Feu ping a l'adreça IP per comprovar si hi ha pèrdua de paquets i " +#~ "latència." + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Activeu aquesta opció per optimitzar la velocitat del ventilador de " +#~ "refrigeració de peces per a Voladís i Pont i obtenir una millor " +#~ "refrigeració" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Velocitat del ventilador per voladís" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Forçar el ventilador de refrigeració de la peça a tenir aquesta velocitat " +#~ "quan imprimeix un pont o un perímetre voladís que tingui un gran grau de " +#~ "voladís. Forçar la refrigeració per voladís i pont pot millorar la " +#~ "qualitat de les peces" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Llindar de voladís de refrigeració" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Força el ventilador de refrigeració a una velocitat específica quan el " +#~ "grau de voladís de la peça impresa excedeix aquest valor. Expressat com a " +#~ "percentatge, indica l'amplada de la línia sense suport de la capa " +#~ "inferior. 0%% significa forçar la refrigeració de tot el perímetre " +#~ "exterior sense importar el grau de voladís" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Densitat dels ponts exteriors. 100% significa pont sòlid. Per defecte és " +#~ "del 100%." + +#~ msgid "Thick bridges" +#~ msgstr "Ponts gruixuts" + +#~ msgid ", ver: " +#~ msgstr ", ver: " + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Màj+Botó esquerre del ratolí" + +#~ msgid "Unselect" +#~ msgstr "Desmarcar" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Escalar" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Forçar elevació Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Salt en Z quan hi ha retracció" + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Mentre s'imprimeix per Objecte, l'extrusora pot xocar amb la faldilla.\n" +#~ "Per tant, restabliu la capa de faldilla a 1 per evitar-ho." + +#~ msgid "Limited" +#~ msgstr "Limitat" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "El vostre objecte sembla massa gran. Es reduirà automàticament per " +#~ "adaptar-se al llit." + +#, fuzzy +#~| msgid "Shift+" +#~ msgid "Shift+G" +#~ msgstr "⌘+Maj+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Habilita farciment de buits per a les superfícies seleccionades. El mínim " +#~ "del forat que s'omplirà es pot controlar des de l'opció filtrar forats " +#~ "petits a continuació.\n" +#~ "\n" +#~ "Opcions:\n" +#~ "1. A tot arreu: aplica farciment de buits a superfícies sòlides " +#~ "superiors, inferiors i internes\n" +#~ "2. Superfícies superiors i inferiors: aplica farciment de buit només a " +#~ "superfícies superiors i inferiors\n" +#~ "3. Enlloc: desactiva el farciment de buits\n" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Aquest factor afecta la quantitat de material per al farciment sòlid " +#~ "inferior" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Activeu aquesta opció per alentir la impressió en zones on potencialment " +#~ "poden existir perímetres corbats" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Velocitat per a ponts i perímetres completament en voladís" + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Temps per carregar nou filament quan canvia de filament. Només per a " +#~ "estadístiques" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Temps per descarregar filament vell en canviar de filament. Només per a " +#~ "estadístiques" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Temps perquè el firmware de la impressora ( o la Unitat Multi Material " +#~ "2.0 ) carregui un filament durant un canvi d'eina ( en executar el Codi-" +#~ "T ). Aquest temps s'afegeix al temps d'impressió total mitjançant " +#~ "l'estimador de temps del Codi-G." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Temps perquè el firmware de la impressora ( o la Unitat Multi Material " +#~ "2.0 ) descarregui un filament durant un canvi d'eina ( en executar el " +#~ "Codi-T ). Aquest temps s'afegeix al temps d'impressió total mitjançant " +#~ "l'estimador de temps del Codi-G." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtrar els buits més petits que el llindar especificat" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Activeu aquesta opció per al control de temperatura de la cambra. " +#~ "S'afegirà una comanda M191 abans de \"machine_start_gcode\"\n" +#~ "Comandes de Codi-G: M141 / M191 S ( 0-255 )" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Una temperatura de cambra més alta pot ajudar a suprimir o reduir la " +#~ "deformació( warping ) i potencialment conduir a una major resistència " +#~ "d'unió entre capes per a materials d'alta temperatura com ABS, ASA, PC, " +#~ "PA, etc. Al mateix temps, la filtració d'aire d'ABS i ASA empitjorarà. " +#~ "Mentre que per a PLA, PETG, TPU, PVA i altres materials de baixa " +#~ "temperatura, la temperatura real de la cambra no hauria de ser alta per " +#~ "evitar obstruccions, pel que 0, que significa apagar, és molt recomanable" + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Profunditat d'entrellaçament d'una regió segmentada. Zero desactiva " +#~ "aquesta funció." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Extrusor de la Torre de Purga" + +#~ msgid "Split the selected object into mutiple objects" +#~ msgstr "Partir l'objecte seleccionat en múltiples objectes" + +#~ msgid "Split the selected object into mutiple parts" +#~ msgstr "Partir l'objecte seleccionat en múltiples peces" #~ msgid "Associate prusaslicer://" #~ msgstr "Associar prusaslicer://" @@ -17108,26 +22391,17 @@ msgstr "" #~ "La mida del fitxer supera el límit de pujada de 100 MB. Si us plau, " #~ "carregueu el vostre fitxer a través del panell." -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - -#~ msgid "V" -#~ msgstr "V" - #, fuzzy #~ msgid "Maximum print speed when purging" #~ msgstr "Màxima velocitat d'impressió en purgar" #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca es basa en BambuStudio de Bambulab, que és de PrusaSlicer de " -#~ "Prusa Research. PrusaSlicer és de Slic3r d'Alessandro Ranellucci i la " +#~ "Prusa Research. PrusaSlicer és de Slic3r d'Alessandro Ranellucci i la " #~ "comunitat RepRap" #~ msgid "Export &Configs" @@ -17160,21 +22434,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Descarregar Filament" -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Placa Base" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - #, fuzzy #~| msgid "Unsaved Changes" #~ msgid "Actions For Unsaved Changes" @@ -17186,7 +22448,7 @@ msgstr "" #~ msgstr "Valor predefinit esquerre" #, fuzzy -#~| msgid "Modified G-codes" +#~| msgid "Modified G-code" #~ msgid "Modified Value" #~ msgstr "Valor modificat" @@ -17210,7 +22472,7 @@ msgstr "" #, fuzzy #~| msgid "" -#~| "You have changed some preset settings. \n" +#~| "You have changed some preset settings.\n" #~| "Would you like to keep these changed settings (new value) after " #~| "switching preset?" #~ msgid "" @@ -17218,7 +22480,7 @@ msgstr "" #~ "Would you like to keep these changed settings(modified value) after " #~ "switching preset?" #~ msgstr "" -#~ "Heu canviat algunes opcions de configuració del perfil. \n" +#~ "Heu canviat algunes opcions de configuració del perfil.\n" #~ "Voleu mantenir aquests paràmetres modificats després de canviar el perfil?" #, fuzzy @@ -17256,7 +22518,7 @@ msgstr "" #~ msgid "" #~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" +#~ "high, red represent humidity is too high. (Hygrometer: lower the better.)" #~ msgstr "" #~ "El verd significa que la humitat AMS és normal, el taronja representa que " #~ "la humitat és alta, el vermell representa que la humitat és excessiva. " @@ -17264,7 +22526,7 @@ msgstr "" #~ msgid "" #~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" +#~ "inactive. Please change the desiccant. (The bars: higher the better.)" #~ msgstr "" #~ "Un estat del dessecant inferior a dues barres indica que el dessecant pot " #~ "estar inactiu. Si us plau, canvieu el dessecant. ( Les barres: com més " @@ -17311,11 +22573,11 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Heu canviat alguns paràmetres del perfil \"%1%\". \n" +#~ "Heu canviat alguns paràmetres del perfil \"%1%\".\n" #~ "Voleu mantenir aquests paràmetres modificats després de canviar el perfil?" #~ msgid " ℃" @@ -17381,17 +22643,9 @@ msgstr "" #~ msgid "Resize" #~ msgstr "Redimensionar" -#~ msgid " " -#~ msgstr " " - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "La Configuració no es pot carregar." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "El 3mf està generat amb una versió d'Snapmaker Orca antiga, només carrega " -#~ "dades de geometria." - #~ msgid "Configuration package updated to " #~ msgstr "Paquet de configuració actualitzat a " @@ -17413,4 +22667,4 @@ msgstr "" #~ "s'especifiquen explícitament." #~ msgid "End end: " -#~ msgstr "Final: " +#~ msgstr "Final: " \ No newline at end of file diff --git a/localization/i18n/cs/Snapmaker_Orca_cs.po b/localization/i18n/cs/Snapmaker_Orca_cs.po index bdf142a2d3..ff8c57723f 100644 --- a/localization/i18n/cs/Snapmaker_Orca_cs.po +++ b/localization/i18n/cs/Snapmaker_Orca_cs.po @@ -7,8 +7,8 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2023-09-30 15:15+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2024-11-03 20:59+0100\n" "Last-Translator: René Mošner \n" "Language-Team: \n" "Language: cs_CZ\n" @@ -16,13 +16,123 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n>=2 && n<=4 ? 1 : 2);\n" -"X-Generator: Poedit 3.3.2\n" +"X-Generator: Poedit 3.5\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "AMS nepodporuje TPU." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Vlhké PVA se stane pružné a může se zaseknout uvnitř AMS, prosím, pečlivě je " +"usušte před použitím." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Filamenty CF/GF jsou tvrdé a křehké, snadno se mohou zlomit nebo zaseknout v " +"AMS, používejte je s opatrností." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Aktuální vlhkost AMS" + +msgid "Humidity" +msgstr "Vlhkost" + +msgid "Temperature" +msgstr "Teplota" + +msgid "Left Time" +msgstr "Zbývající čas" + +msgid "Drying" +msgstr "Sušení" + +msgid "Idle" +msgstr "Nečinný" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Sériové číslo:" + +msgid "Version:" +msgstr "Verze:" + +msgid "Latest version" +msgstr "Nejnovější verze" + +msgid "Support Painting" msgstr "Malování podpěr" -msgid "Alt + Mouse wheel" -msgstr "Alt + kolečko myši" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Kolečko myši" msgid "Section view" msgstr "Zobrazení sekce" @@ -30,9 +140,6 @@ msgstr "Zobrazení sekce" msgid "Reset direction" msgstr "Resetovat směr" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + kolečko myši" - msgid "Pen size" msgstr "Velikost pera" @@ -48,9 +155,6 @@ msgstr "Pravé tlačítko myši" msgid "Block supports" msgstr "Blokování podpěr" -msgid "Shift + Left mouse button" -msgstr "Shift + levé tlačítko myši" - msgid "Erase" msgstr "Vymazat" @@ -98,7 +202,7 @@ msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Umožňuje malovat pouze na fasety vybrané pomocí: \"%1%\"" msgid "Highlight faces according to overhang angle." -msgstr "Zvýrazněte plochy podle úhlu převisů." +msgstr "Zvýrazní plochy podle úhlu převisu." msgid "No auto support" msgstr "Žádné automatické podpěry" @@ -114,7 +218,7 @@ msgstr "Plochou na podložku" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Počet filamentů překračuje maximální počet, který nástroj pro malování " @@ -134,7 +238,7 @@ msgid "Key 1~9" msgstr "Klávesa 1~9" msgid "Choose filament" -msgstr "Vyberte Filament" +msgstr "Vyberte filament" msgid "Edge detection" msgstr "Detekce hran" @@ -157,37 +261,70 @@ msgstr "Vylití barvou" msgid "Height range" msgstr "Rozsah výšky" -msgid "Alt + Shift + Enter" +msgid "Enter" msgstr "" msgid "Toggle Wireframe" msgstr "Přepnout drátový model" +msgid "Remap filaments" +msgstr "Přemapovat filamenty" + +msgid "Remap" +msgstr "Přemapovat" + +msgid "Cancel" +msgstr "Zrušit" + msgid "Shortcut Key " -msgstr "Klávesová Zkratka " +msgstr "Klávesová zkratka " msgid "Triangle" msgstr "Trojúhelník" msgid "Height Range" -msgstr "Rozsah výš" +msgstr "Rozsah výšky" msgid "Vertical" -msgstr "Verikální" +msgstr "Vertikální" msgid "Horizontal" msgstr "Horizontální" msgid "Remove painted color" -msgstr "Odbarvení" +msgstr "Odstranit namalovanou barvu" #, boost-format msgid "Painted using: Filament %1%" msgstr "Namalováno pomocí: Filament %1%" +msgid "Filament remapping finished." +msgstr "Přemapování filamentů dokončeno." + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Velikost štětce" + +msgid "Brush shape" +msgstr "Tvar štětce" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Přesunout" +msgid "Please select at least one object." +msgstr "Prosím, vyberte alespoň jeden objekt." + msgid "Gizmo-Move" msgstr "Gizmo-Posuv" @@ -218,14 +355,20 @@ msgstr "v" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "Výběr části" + +msgid "Fixed step drag" +msgstr "Tažení po pevných krocích" + +msgid "Single sided scaling" +msgstr "Jednostranné škálování" + msgid "Position" msgstr "Pozice" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Otáčení" +msgid "Rotate (relative)" +msgstr "Rotace (relativní)" msgid "Scale ratios" msgstr "Poměry měřítka" @@ -242,9 +385,6 @@ msgstr "Posunout" msgid "Group Operations" msgstr "Skupinové operace" -msgid "Set Position" -msgstr "Nastavení pozice" - msgid "Set Orientation" msgstr "Změna orientace" @@ -257,22 +397,31 @@ msgstr "Resetovat pozici" msgid "Reset Rotation" msgstr "Výchozí Natočení" -msgid "World coordinates" -msgstr "Světové souřadnice" - msgid "Object coordinates" msgstr "Souřadnice objektu" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Světové souřadnice" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Resetovat aktuální rotaci na hodnotu při otevření nástroje rotace." + +msgid "Rotate (absolute)" +msgstr "Rotace (absolutní)" + +msgid "Reset current rotation to real zeros." +msgstr "Resetovat aktuální rotaci na skutečnou nulu." + +msgid "Part coordinates" +msgstr "Souřadnice součásti" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Rozměr" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "jednotné měřítko" @@ -336,6 +485,12 @@ msgstr "Tvar" msgid "Depth" msgstr "Hloubka" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Otáčení" + msgid "Groove" msgstr "Drážka" @@ -386,7 +541,7 @@ msgid "Drag" msgstr "Táhnutí" msgid "Draw cut line" -msgstr "" +msgstr "Kreslit přímku řezu" msgid "Left click" msgstr "Levý klik" @@ -436,9 +591,6 @@ msgstr "Velikost mezery vůči poloměru" msgid "Confirm connectors" msgstr "Potvrzení spojek" -msgid "Cancel" -msgstr "Zrušit" - msgid "Build Volume" msgstr "Maximální rozměry tisku" @@ -533,7 +685,7 @@ msgid "Cut by Plane" msgstr "Řez Rovinou" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "" +msgstr "Řezací nástroj způsobil ne‑manifold hrany, chcete je nyní opravit?" msgid "Repairing model object" msgstr "Oprava objektu modelu" @@ -596,14 +748,10 @@ msgstr "%d trojúhelníků" msgid "Show wireframe" msgstr "Zobrazit drátěný model" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Nelze použít při náhledu procesu." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operace se ukončuje. Prosíme o chvíli strpení." msgid "Face recognition" @@ -612,12 +760,6 @@ msgstr "Rozpoznávání tváře" msgid "Perform Recognition" msgstr "Provést rozpoznávání" -msgid "Brush size" -msgstr "Velikost štětce" - -msgid "Brush shape" -msgstr "Tvar štětce" - msgid "Enforce seam" msgstr "Vynucení švu" @@ -654,7 +796,7 @@ msgid "Angle" msgstr "Úhel" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Vloženo\n" @@ -669,8 +811,8 @@ msgstr "Povrch" msgid "Horizontal text" msgstr "Vodorovný text" -msgid "Shift + Mouse move up or down" -msgstr "Shift + pohyb myši nahoru nebo dolů" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Otočit text" @@ -794,7 +936,7 @@ msgid "Change Text Type" msgstr "Změnit typ operace s textem" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Přejmenování stylu(%1%) pro reliéfní text" msgid "Name can't be empty." @@ -988,7 +1130,7 @@ msgstr "Vzdálenost středu textu od povrchu modelu." msgid "Undo rotation" msgstr "Akce zpět Rotace" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Otáčení textu ve směru hodinových ručiček." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1006,10 +1148,14 @@ msgstr "Natočit text kolmo ke kameře" msgid "Orient the text towards the camera." msgstr "Orientovat text směrem ke kameře." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "Font \"%1%\" nelze použít. Prosím vyberte jiný." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "Nelze načíst přesně stejné písmo(\"%1%\"). Aplikace vybrala podobné " "písmo(\"%2%\"). Musíte zadat písmo pro povolení editace textu." @@ -1124,11 +1270,11 @@ msgstr "Otevřená vyplněná cesta" msgid "Undefined stroke type" msgstr "Nedefinovaný typ obrysu" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "Cestu nelze opravit z křížení sama sebe a více bodů." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "Konečný tvar obsahuje vlastní průsečík nebo více bodů se stejnou souřadnicí." @@ -1137,7 +1283,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "Tvar je označen jako neviditelný (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Výplň tvaru (%1%) obsahuje nepodporované: %2%." @@ -1167,7 +1313,8 @@ msgstr "Znovu načíst SVG z disku." msgid "Change file" msgstr "Změnit soubor" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Změnit na jiný .svg soubor" msgid "Forget the file path" @@ -1194,7 +1341,8 @@ msgstr "Uložit jako" msgid "Save SVG file" msgstr "Uložit SVG soubor" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "Uložit jako soubor '.svg'" msgid "Size in emboss direction." @@ -1262,6 +1410,9 @@ msgstr "Nano SVG parser nemůže číst ze souboru (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG soubor neobsahuje jedinou cestu, kterou lze embosovat (%1%)." +msgid "No feature" +msgstr "Žádný prvek" + msgid "Vertex" msgstr "Vertex" @@ -1286,9 +1437,6 @@ msgstr "Střed hrany" msgid "Center of circle" msgstr "Střed kruhu" -msgid "ShiftLeft mouse button" -msgstr "" - msgid "Select feature" msgstr "Vyberat objekt" @@ -1304,18 +1452,24 @@ msgstr "Zrušit výběr" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Zrušení výběru" +msgid "Cancel a feature until exit" +msgstr "Zrušit zvolený prvek" msgid "Measure" msgstr "Měření" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Potvrďte, že poměr explodovaného zobrazení = 1, a vyberte alespoň jeden " +"objekt." + msgid "Edit to scale" msgstr "Změna rozměru" msgctxt "Verb" -msgid "Scale" -msgstr "Měřítko" +msgid "Scale all" +msgstr "Škálovat vše" msgid "None" msgstr "Žádné" @@ -1329,6 +1483,48 @@ msgstr "Vzdálenost" msgid "Selection" msgstr "Výběr" +msgid " (Moving)" +msgstr " (Pohyb)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Vyberte 2 plochy na objektech a\n" +"sestavte objekty k sobě." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Vyberte 2 body nebo kružnice na objektech a\n" +"zadejte vzdálenost mezi nimi." + +msgid "Face" +msgstr "Plocha" + +msgid " (Fixed)" +msgstr " (Opraveno)" + +msgid "Point" +msgstr "Bod" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Prvek 1 byl resetován,\n" +"prvek 2 byl přeřazen na pozici prvku 1" + +msgid "Warning: please select Plane's feature." +msgstr "Varování: vyberte prosím prvek typu rovina." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Varování: vyberte prosím prvek typu bod nebo kružnice." + +msgid "Warning: please select two different meshes." +msgstr "Varování: vyberte prosím dvě odlišné sítě." + msgid "Copy to clipboard" msgstr "Kopírovat do schránky" @@ -1344,8 +1540,26 @@ msgstr "Přímá vzdálenost" msgid "Distance XYZ" msgstr "Vzdálenost XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Rovnoběžné" + +msgid "Center coincidence" +msgstr "Shoda středů" + +msgid "Feature 1" +msgstr "Prvek 1" + +msgid "Reverse rotation" +msgstr "Obrátit rotaci" + +msgid "Rotate around center:" +msgstr "Otáčet kolem středu:" + +msgid "Parallel distance:" +msgstr "Rovnoběžná vzdálenost:" + +msgid "Flip by Face 2" +msgstr "Překlopit podle plochy 2" msgid "Notice" msgstr "Oznámení" @@ -1383,8 +1597,11 @@ msgstr "" "Konfigurační soubor \" %1% \" byl načten, ale některé hodnoty nebyly " "rozpoznány." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Založeno na PrusaSlicer a Bambustudio" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca se ukončí z důvodu nedostatku paměti. Může to být chyba. Uvítáme, " @@ -1435,6 +1652,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Cesta ke zdrojům neexistuje anebo není ve složce: %s" + #, c-format, boost-format msgid "" "%s\n" @@ -1460,7 +1681,7 @@ msgid "This is the newest version." msgstr "Toto je nejnovější verze." msgid "Info" -msgstr "Info" +msgstr "Informace" msgid "" "The Snapmaker Orca configuration file may be corrupted and cannot be parsed.\n" @@ -1483,30 +1704,30 @@ msgstr "Načítání aktuálních předvoleb" msgid "Loading a mode view" msgstr "Načítání zobrazení režimu" -msgid "Choose one file (3mf):" -msgstr "Vyberte jeden soubor (3mf):" +msgid "Choose one file (3MF):" +msgstr "Vyberte jeden soubor (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Vyberte jeden nebo více souborů (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Vyberte jeden nebo více souborů (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Vyberte jeden nebo více souborů (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Vyberte jeden nebo více souborů (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Vyberte ZIP soubor" -msgid "Choose one file (gcode/3mf):" -msgstr "Vyberte jeden soubor (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Vyberte jeden soubor (GCODE/3MF):" msgid "Some presets are modified." msgstr "Některé předvolby jsou upraveny." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"Předvolby modifield můžete ponechat pro nový projekt, zahodit nebo uložit " +"Předvolby modified můžete ponechat pro nový projekt, zahodit nebo uložit " "změny jako nové předvolby." msgid "User logged out" @@ -1521,7 +1742,7 @@ msgstr "Otevřít projekt" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Verze Snapmaker Orca je příliš nízká a je třeba ji aktualizovat na nejnovější " "verze předtím, než ji lze normálně používat" @@ -1533,9 +1754,11 @@ msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" +"Počet uživatelských předvoleb uložených v cloudu překročil horní limit, nově " +"vytvořené uživatelské předvolby lze použít pouze lokálně." msgid "Sync user presets" -msgstr "" +msgstr "Synchronizovat uživatelské předvolby" msgid "Loading user preset" msgstr "Načítání uživatelské předvolby" @@ -1590,7 +1813,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Inicializace grafického rozhraní Snapmaker Orca se nezdařila" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Závažná chyba, zachycená výjimka: %1%" msgid "Quality" @@ -1620,12 +1843,18 @@ msgstr "Horní plné vrstvy" msgid "Top Minimum Shell Thickness" msgstr "Minimální tloušťka skořepiny nahoře" +msgid "Top Surface Density" +msgstr "Vrchní povrchová hustota" + msgid "Bottom Solid Layers" msgstr "Spodní plné vrstvy" msgid "Bottom Minimum Shell Thickness" msgstr "Minimální tloušťka skořepiny dole" +msgid "Bottom Surface Density" +msgstr "Spodní povrchová hustota" + msgid "Ironing" msgstr "Žehlení" @@ -1692,6 +1921,9 @@ msgstr "Smazat" msgid "Delete the selected object" msgstr "Smazat vybraný objekt" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Načíst..." @@ -1705,14 +1937,17 @@ msgid "Cone" msgstr "Kužel" msgid "Disc" -msgstr "" +msgstr "Disk" msgid "Torus" -msgstr "" +msgstr "Torus" msgid "Orca Cube" msgstr "Orca Kostka" +msgid "Orca Tolerance Test" +msgstr "Orca Test Tolerance" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1723,18 +1958,24 @@ msgid "Voron Cube" msgstr "Voron Kostka" msgid "Stanford Bunny" -msgstr "" +msgstr "Stanfordský králík" msgid "Orca String Hell" msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" +"Tento model má na horní ploše reliéfní text. Pro dosažení optimálních " +"výsledků, je vhodné nastavit hodnotu 'Prahová hodnota jedné stěny " +"(min_width_top_surface)' na 0, aby možnost 'Pouze jedna stěna na horních " +"plochách' fungovala co nejlépe.\n" +"Ano – Tato nastavení se mají měnit automaticky\n" +"Ne – Tato nastavení se mi nemění." msgid "Text" msgstr "Text" @@ -1767,10 +2008,10 @@ msgid "Fix model" msgstr "Opravit model" msgid "Export as one STL" -msgstr "" +msgstr "Exportovat jako jedno STL" msgid "Export as STLs" -msgstr "" +msgstr "Exportovat jako STL" msgid "Reload from disk" msgstr "Znovu načíst z disku" @@ -1784,6 +2025,12 @@ msgstr "Nahradit STL souborem" msgid "Replace the selected part with new STL" msgstr "Nahradit vybranou část novým STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Změnit filament" @@ -1821,16 +2068,16 @@ msgstr "Čištění do podpěr objektů" msgid "Edit in Parameter Table" msgstr "Upravit v tabulce Parametrů" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Převést z palce" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Obnovit na palec" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Převést z mm" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Obnovit do mm" msgid "Assemble" @@ -1917,9 +2164,18 @@ msgstr "Rozdělit vybraný objekt" msgid "Auto orientation" msgstr "Automatická orientace" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Automaticky orientovat objekt pro zlepšení kvality tisku." +msgid "Edit" +msgstr "Upravit" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Vybrat vše" @@ -1939,10 +2195,10 @@ msgid "arrange current plate" msgstr "uspořádat aktuální podložku" msgid "Reload All" -msgstr "" +msgstr "Přenačíst vše" msgid "reload all from disk" -msgstr "" +msgstr "Přenačíst vše z disku" msgid "Auto Rotate" msgstr "Automatické otáčení" @@ -1956,6 +2212,30 @@ msgstr "Smazat Podložku" msgid "Remove the selected plate" msgstr "Odstranit vybranou podložku" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Klonovat" @@ -1965,9 +2245,18 @@ msgstr "Zjednodušit model" msgid "Center" msgstr "Střed" +msgid "Drop" +msgstr "" + msgid "Edit Process Settings" msgstr "Upravit nastavení procesu" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Upravit parametry tisku pro jeden objekt" @@ -2016,8 +2305,8 @@ msgstr[0] "%1$d nespojitelná hrana" msgstr[1] "%1$d nespojitelné hrany" msgstr[2] "%1$d nespojitelných hran" -msgid "Right click the icon to fix model object" -msgstr "Kliknutím pravým tlačítkem na ikonu opravíte objekt modelu" +msgid "Click the icon to repair model object" +msgstr "Kliknutím na ikonu opravíte objekt modelu" msgid "Right button click the icon to drop the object settings" msgstr "Kliknutím pravým tlačítkem na ikonu zrušíte nastavení objektu" @@ -2068,6 +2357,9 @@ msgstr "" "Přepněte do režimu nastavení pro jednotlivé objekty a upravte procesní " "nastavení vybraných předmětů." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Odstranění spojky z objektu, který je částí řezu" @@ -2086,13 +2378,13 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Tato akce způsobí ztrátu informací o řezu.\n" -"Po této akci nelze zaručit konzistenci modelu. \n" +"Po této akci nelze zaručit konzistenci modelu.\n" "\n" "Chcete-li manipulovat s částmi modelu nebo negativními objemy, musíte " "nejprve zneplatnit informace o řezu modelu." @@ -2103,7 +2395,7 @@ msgstr "Smazat všechny spojky" msgid "Deleting the last solid part is not allowed." msgstr "Smazání poslední pevné části není povoleno." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "Cílový objekt obsahuje pouze jednu část a nelze jej rozdělit." msgid "Assembly" @@ -2146,12 +2438,12 @@ msgid "Selection conflicts" msgstr "Konflikty výběru" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "Pokud je první vybraná položka objekt, druhá by měla být také objekt." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Pokud je tato možnost povolena, zobrazí se při spuštění aplikace užitečné " "tipy." @@ -2217,7 +2509,7 @@ msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" "jednu buňku lze zkopírovat pouze do jedné nebo více buněk ve stejném sloupci" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "kopírování více buněk není podporováno" msgid "Outside" @@ -2238,6 +2530,9 @@ msgstr "Auto Límec" msgid "Mouse ear" msgstr "Uši myši" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Pouze vnější" @@ -2388,23 +2683,8 @@ msgstr "Prosím, zkontrolujte síťové připojení tiskárny a Studia." msgid "Connecting..." msgstr "Připojuji se..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Prázdný" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Automatické Doplnění" - -msgid "AMS not connected" -msgstr "AMS není připojen" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Načíst" @@ -2412,29 +2692,122 @@ msgstr "Načíst" msgid "Unload" msgstr "Vysunout" -msgid "Ext Spool" -msgstr "Ext Cívka" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "" -msgid "Tips" -msgstr "Tipy" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Guide" -msgstr "Průvodce" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" -msgid "Retry" -msgstr "Zkusit znovu" +msgid "Change Anyway" +msgstr "" -msgid "Calibrating AMS..." -msgstr "Kalibruji AMS..." +msgid "Off" +msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "Během kalibrace došlo k problému. Kliknutím zobrazíte řešení." +msgid "Filter" +msgstr "Filtr" -msgid "Calibrate again" -msgstr "Znovu kalibrovat" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" -msgid "Cancel calibration" -msgstr "Zrušit kalibraci" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Chlazení" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Shora" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "Čekání..." @@ -2451,42 +2824,37 @@ msgstr "Vytáhněte aktuální filament" msgid "Push new filament into extruder" msgstr "Zatlačte nový filament do extruderu" +msgid "Grab new filament" +msgstr "Vezměte nový filament" + msgid "Purge old filament" msgstr "Vyčistit starý filament" -msgid "Feed Filament" -msgstr "Zavádění filamentu" - msgid "Confirm extruded" msgstr "Potvrdit extruzi" msgid "Check filament location" msgstr "Zkontrolovat polohu filamentu" -msgid "Grab new filament" -msgstr "Vezměte nový filament" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -msgid "Edit" -msgstr "Upravit" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Všechny vybrané objekty jsou na uzamčené desce,\n" "Tyto objekty nelze automaticky uspořádat." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Nejsou vybrány žádné aranžovatelné objekty." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Tato podložka je zamčená.\n" "Nemůžeme automaticky uspořádat tuto podložku." @@ -2526,15 +2894,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Všechny vybrané objekty jsou na uzamčené podložce,\n" "Nemůžeme automaticky orientovat tyto objekty." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Tato podložka je zamčená.\n" "Nemůžeme automaticky orientovat tuto podložku." @@ -2546,10 +2914,10 @@ msgid "Orienting" msgstr "Orientování" msgid "Orienting canceled." -msgstr "" +msgstr "Orientování zrušeno" msgid "Filling" -msgstr "" +msgstr "Výplň" msgid "Bed filling canceled." msgstr "Vyplnění podložky zrušeno." @@ -2588,7 +2956,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Připojení ke cloudové službě se nezdařilo. Zkuste to prosím znovu." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Tiskový soubor nebyl nalezen. Prosím znovu slicovat." msgid "" @@ -2615,7 +2983,7 @@ msgstr "" "Velikost tiskového souboru je příliš velká. Upravte velikost souboru a " "zkuste to znovu." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Tiskový soubor nebyl nalezen. Prosím, slicujte jej znovu a pošlete k tisku." @@ -2652,21 +3020,58 @@ msgstr "Úspěšně odesláno. Automaticky přejde na stránku zařízení v %ss msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Úspěšně odesláno. Automaticky přejde na další stránku za %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Před tiskem přes LAN je třeba vložit SD kartu." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "Odesílání souboru gkód přes LAN" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Odesílání souboru gkód na sd kartu" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Úspěšně odesláno. Zavřít aktuální stránku za %s s" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Před odesláním do tiskárny je třeba vložit SD kartu." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Importuje se SLA archiv" @@ -2708,10 +3113,10 @@ msgstr "Stahování" msgid "Download failed" msgstr "Stahování se nezdařilo" -msgid "Cancelled" +msgid "Canceled" msgstr "Zrušeno" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Instalace proběhla úspěšně." msgid "Installing" @@ -2735,7 +3140,7 @@ msgstr "Snapmaker Orca je licencován pod " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, verze 3" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2752,9 +3157,6 @@ msgstr "" msgid "About %s" msgstr "O %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca je založen na BambuStudio, PrusaSlicer a SuperSlicer." @@ -2782,9 +3184,6 @@ msgstr "Potvrdit" msgid "Close" msgstr "Zavřít" -msgid "Colour" -msgstr "Barva" - msgid "" "Nozzle\n" "Temperature" @@ -2805,9 +3204,6 @@ msgstr "Vstupní hodnota by měla být větší než %1% a menší než %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "Nastavení informací o slotu AMS při tisku není podporováno" - msgid "Factors of Flow Dynamics Calibration" msgstr "Faktory Kalibrace Dynamiky Průtoku" @@ -2820,6 +3216,9 @@ msgstr "Faktor K" msgid "Factor N" msgstr "Faktor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Nastavení informací o slotu AMS při tisku není podporováno" + msgid "Setting Virtual slot information while printing is not supported" msgstr "Nastavení informací o virtuálním slotu během tisku není podporováno" @@ -2837,6 +3236,15 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Jiná Barva" @@ -2870,15 +3278,9 @@ msgstr "Teplota Podložky" msgid "Max volumetric speed" msgstr "Maximální objemová rychlost" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Teplota podložky" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Spustit kalibraci" @@ -2920,12 +3322,79 @@ msgstr "Kalibrace dynamického průtoku" msgid "Step" msgstr "Krok" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS sloty" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Vnější" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Tryska" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "Poznámka: Lze vybrat pouze sloty AMS se stejným typem materiálu." +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" msgstr "Povolit AMS" @@ -2939,18 +3408,15 @@ msgstr "Zakázat AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Tisk s filamentem namontovaným na zadní straně podvozku" -msgid "Current Cabin humidity" -msgstr "" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Nastavit, který slot AMS by měl být použit pro filament použitý v tiskové " "úloze" @@ -2970,12 +3436,21 @@ msgstr "Nepovolovat AMS" msgid "Print using materials mounted on the back of the case" msgstr "Tisk s použitím materiálů namontovaných na zadní straně pouzdra" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Tisk s filamenty v ams" msgid "Print with filaments mounted on the back of the chassis" msgstr "Tisk s filamenty namontovanými na zadní straně šasi" +msgid "Auto Refill" +msgstr "Automatické Doplnění" + +msgid "Left" +msgstr "Zleva" + +msgid "Right" +msgstr "Zprava" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -2983,9 +3458,17 @@ msgstr "" "Když současný materiál dojde, tiskárna bude pokračovat v tisku v " "následujícím pořadí." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Skupina" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "" "Tiskárna v současné době nepodporuje automatické doplňování (auto refill)." @@ -2996,15 +3479,10 @@ msgstr "" "Záloha AMS filamentu není povolena, prosím, povolte ji v nastavení AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Pokud v AMS existují dva identické filamenty, bude povolena záloha AMS " -"filamentu. \n" -"(Aktuálně podporuje automatické doplňování spotřebního materiálu stejné " -"značky, typu materiálu a barvy)" msgid "DRY" msgstr "" @@ -3026,7 +3504,7 @@ msgstr "" "Lab. To trvá asi 20 sekund." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" @@ -3042,8 +3520,8 @@ msgstr "Aktualizovat při spuštění" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS automaticky přečte informace o vloženém filamentu při spuštění. Bude to " "trvat asi 1 minutu. Proces čtení bude navíjet cívku filamentu." @@ -3060,19 +3538,16 @@ msgid "Update remaining capacity" msgstr "Aktualizovat zbývající kapacitu" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS odhadne zbývající kapacitu filamentu Bambu po filamentu informace jsou " -"aktualizovány. Během tisku bude aktualizována zbývající kapacita automaticky." msgid "AMS filament backup" msgstr "AMS záloha filamentů" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS bude pokračovat na další cívku se stejnými vlastnostmi filamentu " "automaticky, když dojde aktuální filament" @@ -3126,10 +3601,14 @@ msgid "" "program" msgstr "Došlo k chybě. Možná paměť systému nestačí nebo je to chyba program" -msgid "Please save project and restart the program. " -msgstr "Uložte projekt a restartujte program. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Uložte projekt a restartujte program." + +msgid "Processing G-code from Previous file..." msgstr "Zpracovává se G-kód z předchozího souboru..." msgid "Slicing complete" @@ -3162,7 +3641,7 @@ msgstr "Vykonávají se postprodukční skripty" msgid "Successfully executed post-processing script" msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Během exportu G-codu došlo k neznámé chybě." #, boost-format @@ -3213,12 +3692,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "G-code byl exportován do %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Neznámá chyba při exportu G-kódu." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3235,222 +3714,6 @@ msgstr "" "Plánování nahrávání do `%1%`. Viz Okno -> Fronta nahrávaní do tiskového " "serveru" -msgid "Device" -msgstr "Zařízení" - -msgid "Task Sending" -msgstr "" - -msgid "Task Sent" -msgstr "" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "" - -msgid "View" -msgstr "Zobrazení" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "" - -msgid "Task Name" -msgstr "" - -msgid "Device Status" -msgstr "" - -msgid "Actions" -msgstr "" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Přidat" - -msgid "Idle" -msgstr "Nečinný" - -msgid "Printing" -msgstr "Tisk" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Nekompatibilní" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Připravit" - -msgid "Slicing" -msgstr "Slicování" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Pokračovat" - -msgid "Stop" -msgstr "Zastavit" - -msgid "Task Status" -msgstr "" - -msgid "Sent Time" -msgstr "" - -msgid "There are no tasks to be sent!" -msgstr "" - -msgid "No historical tasks!" -msgstr "" - -msgid "Loading..." -msgstr "Načítání..." - -msgid "No AMS" -msgstr "" - -msgid "Send to Multi-device" -msgstr "" - -msgid "Preparing print job" -msgstr "Příprava tiskové úlohy" - -msgid "Abnormal print file data. Please slice again" -msgstr "Abnormální data tiskového souboru. Prosím znovu slicovat" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "" - -msgid "Use AMS" -msgstr "" - -msgid "Select Printers" -msgstr "" - -msgid "Ams Status" -msgstr "" - -msgid "Printing Options" -msgstr "" - -msgid "Bed Leveling" -msgstr "Vyrovnání podložky" - -msgid "Timelapse" -msgstr "Časosběr" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" - -msgid "Wait" -msgstr "Zaneprázdněn" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" - -msgid "Send" -msgstr "Odeslat" - -msgid "Name is invalid;" -msgstr "Jméno je neplatné;" - -msgid "illegal characters:" -msgstr "nepovolené znaky:" - -msgid "illegal suffix:" -msgstr "nelegální přípona:" - -msgid "The name is not allowed to be empty." -msgstr "Název nesmí být prázdný." - -msgid "The name is not allowed to start with space character." -msgstr "Název nesmí začínat mezerou." - -msgid "The name is not allowed to end with space character." -msgstr "Název nesmí končit mezerou." - -msgid "The name length exceeds the limit." -msgstr "Délka názvu překračuje limit." - msgid "Origin" msgstr "Počátek" @@ -3475,7 +3738,7 @@ msgid "Circular" msgstr "Kruhový" msgid "Load shape from STL..." -msgstr "Načíst tvar ze souboru STL…" +msgstr "Načíst tvar ze souboru STL …" msgid "Settings" msgstr "Nastavení" @@ -3522,9 +3785,12 @@ msgstr "Vyberte STL soubor, ze kterého chcete importovat model podložky:" msgid "Bed Shape" msgstr "Tvar Podložky" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" msgid "" @@ -3546,22 +3812,22 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Doporučená teplota trysky pro tento typ filamentu je [%d, %d]stupňů Celsia" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Příliš malá maximální objemová rychlost.\n" "Obnovit na 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "Aktuální teplota komory je vyšší než bezpečná teplota materiálu,může to " @@ -3570,14 +3836,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Příliš malá výška vrstvy.\n" "Obnovit na 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Příliš malá rozteč žehlení.\n" "Obnovit na 0,1" @@ -3622,14 +3888,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3667,46 +3933,58 @@ msgstr "" "ANO - Zachovat čistící věž\n" "NE - Zachovat výšku nezávislé podpůrné vrstvy" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Během tisku podle objektu může extruder narazit na obrys.\n" -"Takže resetujte vrstvu obrysu na 1, abyste tomu zabránili." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spirálový režim funguje pouze tehdy, když je 1 smyčka na stěně, podpěry jsou " -"deaktivovány, horní skořepina vrstvy jsou 0, hustota vnitřní výplně je 0 a " -"typ časosběru je tradiční." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Ale stroje s I3 strukturou nevytvářejí časosběrná videa." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Změnit tato nastavení automaticky? \n" +"Změnit tato nastavení automaticky?\n" "Ano - Změňte tato nastavení a povolte režim spirála/váza automaticky\n" "Ne - zrušit povolení spirálového režimu" +msgid "Printing" +msgstr "Tisk" + msgid "Auto bed leveling" msgstr "Automatické vyrovnávání podložky" msgid "Heatbed preheating" msgstr "Předehřev vyhřívané podložky" -msgid "Sweeping XY mech mode" -msgstr "Sweeping XY mech mode" +msgid "Vibration compensation" +msgstr "Kompenzace vibrací" msgid "Changing filament" msgstr "Výměna filamentu" @@ -3714,14 +3992,14 @@ msgstr "Výměna filamentu" msgid "M400 pause" msgstr "M400 pauza" -msgid "Paused due to filament runout" -msgstr "Pozastaveno kvůli docházejícího filamentu" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Vytápění hotend" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Kalibrace extruze" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Skenování povrchu podložky" @@ -3744,78 +4022,138 @@ msgstr "Čištění špičky trysky" msgid "Checking extruder temperature" msgstr "Kontrola teploty extruderu" -msgid "Printing was paused by the user" -msgstr "Tisk byl pozastaven uživatelem" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pozastavení při pádu předního krytu" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Kalibrace mikro lida" -msgid "Calibrating extrusion flow" -msgstr "Kalibrace extruze průtoku" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pozastaveno kvůli poruše teploty trysky" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pozastaveno kvůli poruše teploty topné podložky" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Vysunutí filamentu" -msgid "Skip step pause" -msgstr "Přeskočit krok pauza" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Zavedení filamentu" -msgid "Motor noise calibration" -msgstr "Kalibrace zvuku motoru" +msgid "Motor noise cancellation" +msgstr "Potlačení hluku motoru" -msgid "Paused due to AMS lost" -msgstr "Pozastaveno kvůli ztrátě AMS" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Pozastaveno kvůli nízké rychlosti ventilátoru heat break" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Pozastaveno kvůli chybě v řízení teploty komory" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Chlazení komory" -msgid "Paused by the Gcode inserted by user" -msgstr "Pozastaveno uživatelem vloženým G-kódem" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Předvedení zvuku motoru" -msgid "Nozzle filament covered detected pause" +msgid "Pause (nozzle clumping)" msgstr "" -msgid "Cutter error pause" +msgid "Pause (cutter error)" msgstr "" -msgid "First layer error pause" +msgid "Pause (first layer error)" msgstr "" -msgid "Nozzle clog pause" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" msgstr "" msgid "Unknown" msgstr "Neznámý" -msgid "Fatal" -msgstr "Fatální" - -msgid "Serious" -msgstr "Vážně" - -msgid "Common" -msgstr "Běžný" - msgid "Update successful." msgstr "Aktualizace úspěšná." @@ -3828,32 +4166,56 @@ msgstr "Ověření se nezdařilo." msgid "Update failed." msgstr "Aktualizace se nezdařila." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"Aktuální teplota komory nebo cílová teplota komory přesahuje 45℃. Aby se " -"předešlo ucpaní extruderu, není povoleno načítání nízkoteplotního filamentu " -"(PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Do extruderu je načten nízkoteplotní filament (PLA/PETG/TPU). Aby se " -"předešlo ucpaní extruderu, není povoleno nastavovat teplotu komory nad 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Pokud nastavíte teplotu komory pod 40℃, řízení teploty komory se neaktivuje " "a cílová teplota komory bude automaticky nastavena na 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Nepodařilo se spustit tiskovou úlohu" msgid "" @@ -3867,31 +4229,77 @@ msgstr "Aktuální parametr kalibrace průtoku je neplatný" msgid "Selected diameter and machine diameter do not match" msgstr "Vybraný průměr se neshoduje s průměrem stroje" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Selhalo generování kalibračního G-kódu" msgid "Calibration error" msgstr "Chyba kalibrace" -msgid "TPU is not supported by AMS." -msgstr "AMS nepodporuje TPU." - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "AMS nepodporuje Bambu PET-CF/PA6-CF." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume Printing" msgstr "" -"Vlhké PVA se stane pružné a může se zaseknout uvnitř AMS, prosím, pečlivě je " -"usušte před použitím." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "Zavézt Filament" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Hotovo" + +msgid "Retry" +msgstr "Zkusit znovu" + +msgid "Resume" +msgstr "Pokračovat" + +msgid "Unknown error." msgstr "" -"Filamenty CF/GF jsou tvrdé a křehké, snadno se mohou zlomit nebo zaseknout v " -"AMS, používejte je s opatrností." msgid "default" msgstr "výchozí" @@ -3903,7 +4311,7 @@ msgstr "Upravit Vlastní G-code (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Vestavěné zástupné symboly (dvojklikem na položku přidáte do G-code)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3962,7 +4370,7 @@ msgid "parameter name" msgstr "název parametru" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s nemůže být procento" #, c-format, boost-format @@ -4003,10 +4411,27 @@ msgstr "Zadaná hodnota je mimo rozsah" msgid "Some extension in the input is invalid" msgstr "Některá přípona ve vstupu je neplatná" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Neplatný formát. Očekávaný vektorový formát: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Výška vrstvy" @@ -4016,9 +4441,6 @@ msgstr "Šířka Extruze" msgid "Fan Speed" msgstr "Rychlost ventilátoru" -msgid "Temperature" -msgstr "Teplota" - msgid "Flow" msgstr "Průtok" @@ -4052,7 +4474,7 @@ msgstr "Ventilátor: " msgid "Temperature: " msgstr "Teplota: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Načítání G-kódů" msgid "Generating geometry vertex data" @@ -4071,7 +4493,7 @@ msgid "Flushed" msgstr "Čištění" msgid "Tower" -msgstr "" +msgstr "Věž" msgid "Total" msgstr "Celkem" @@ -4085,6 +4507,72 @@ msgstr "Celkový čas" msgid "Total cost" msgstr "Celková cena" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Tipy:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Tipy" + msgid "up to" msgstr "až do" @@ -4094,17 +4582,11 @@ msgstr "nad" msgid "from" msgstr "z" -msgid "Color Scheme" -msgstr "Barevné schéma" - msgid "Time" msgstr "Čas" -msgid "Percent" -msgstr "Procento" - -msgid "Used filament" -msgstr "Použito filamentu" +msgid "Usage" +msgstr "Využití" msgid "Layer Height (mm)" msgstr "Výška vrstvy (mm)" @@ -4149,14 +4631,14 @@ msgid "travel" msgstr "Cestování" msgid "Extruder" -msgstr "Extruder" - -msgid "Filament change times" -msgstr "Doby výměny Filamentu" +msgstr "" msgid "Cost" msgstr "Náklady" +msgid "Filament change times" +msgstr "Doby výměny Filamentu" + msgid "Color change" msgstr "Změna barvy" @@ -4166,11 +4648,8 @@ msgstr "Tisk" msgid "Printer" msgstr "Tiskárna" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" -msgstr "" +msgid "Tool Change" +msgstr "Změna nástroje" msgid "Time Estimation" msgstr "Časový odhad" @@ -4196,6 +4675,19 @@ msgstr "Přepnout do tichého režimu" msgid "Switch to normal mode" msgstr "Přepnout do normálního režimu" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Variabilní výška vrstvy" @@ -4214,27 +4706,15 @@ msgstr "Rádius" msgid "Keep min" msgstr "Zachovat minima" -msgid "Left mouse button:" -msgstr "Levé tlačítko myši:" - msgid "Add detail" msgstr "Přidat detail" -msgid "Right mouse button:" -msgstr "Pravé tlačítko myši:" - msgid "Remove detail" msgstr "Ubrat detail" -msgid "Shift + Left mouse button:" -msgstr "Shift + Levé tlačítko myši:" - msgid "Reset to base" msgstr "Obnovit na výchozí" -msgid "Shift + Right mouse button:" -msgstr "Shift + Pravé tlačítko myši:" - msgid "Smoothing" msgstr "Vyhlazení" @@ -4247,6 +4727,55 @@ msgstr "Zvětšit/Zmenšit oblast úprav" msgid "Sequence" msgstr "Sekvence" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Zrcadlit Objekt" @@ -4292,11 +4821,25 @@ msgstr "Vyhněte se oblasti kalibrace extruze" msgid "Align to Y axis" msgstr "Zarovnat podle osy Y" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Přidat" + msgid "Add plate" msgstr "Přidat Podložku" -msgid "Auto orient" -msgstr "Automatická orientace" +msgid "Auto orient all/selected objects" +msgstr "Automatická orientace všechny/vybrané objekty" + +msgid "Auto orient all objects on current plate" +msgstr "Automatická orientace všechny objekty na aktuální desce" msgid "Arrange all objects" msgstr "Uspořádat všechny objekt" @@ -4316,12 +4859,30 @@ msgstr "Zobrazení sestavy" msgid "Select Plate" msgstr "Vybrat Podložku" +msgid "Slicing" +msgstr "Slicování" + +msgid "Slice all" +msgstr "Slicuj Vše" + +msgid "Failed" +msgstr "Selhalo" + +msgid "All Plates" +msgstr "Všechny podložky" + +msgid "Stats" +msgstr "Statistiky" + msgid "Assembly Return" msgstr "Návrat k sestavení" -msgid "return" +msgid "Return" msgstr "Návrat" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "Panel nástrojů Malování" @@ -4334,6 +4895,9 @@ msgstr "Sekce Zobrazení" msgid "Assemble Control" msgstr "Ovládání sestavy" +msgid "Selection Mode" +msgstr "Režim výběru" + msgid "Total Volume:" msgstr "Celkový objem:" @@ -4348,32 +4912,71 @@ msgstr "Velikost:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Byly zjištěny konflikty cest g-kódu na vrstvě %d, z = %.2lf mm. Prosím " +"Byly zjištěny konflikty cest G-kódu na vrstvě %d, Z = %.2lfmm. Prosím " "oddělte konfliktní objekty dále od sebe (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Objekt je položen přes hranici podložky." msgid "A G-code path goes beyond the max print height." msgstr "Cesta G-kódu přesahuje maximální výšku tisku." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Cesta G-kódu přesahuje hranici podložky." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Viditelný je pouze objekt, který se právě upravuje." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Objekt je položen přes hranici podložky nebo překračuje limit výšky.\n" -"Prosím, vyřešte problém tím, že jej úplně přesunete na podložku nebo mimo ní " -"a potvrďte, že výška je v rámci objemu stavby." msgid "Calibration step selection" msgstr "Výběr kroku kalibrace" @@ -4384,11 +4987,8 @@ msgstr "Micro lidar kalibrace" msgid "Bed leveling" msgstr "Vyrovnání podložky" -msgid "Vibration compensation" -msgstr "Kompenzace vibrací" - -msgid "Motor noise cancellation" -msgstr "Potlačení hluku motoru" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Kalibrační program" @@ -4441,24 +5041,21 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "Zobrazit stránku průvodce \" Živé video \" ." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Připojit tiskárnu (LAN)" msgid "Please input the printer access code:" msgstr "Zadejte přístupový kód tiskárny:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Najdete jej v \" Nastavení > Síť > Přístupový kód \" \n" -"na tiskárně, jak je znázorněno na obrázku:" msgid "Invalid input." msgstr "Neplatný vstup." @@ -4478,9 +5075,15 @@ msgstr "Uzavření aplikace, zatímco některé přednastavení jsou upraveny." msgid "Logging" msgstr "Protokolování" +msgid "Prepare" +msgstr "Připravit" + msgid "Preview" msgstr "Náhled" +msgid "Device" +msgstr "Zařízení" + msgid "Multi-device" msgstr "" @@ -4502,12 +5105,12 @@ msgstr "Slicuj Podložku" msgid "Print plate" msgstr "Tisk podložky" -msgid "Slice all" -msgstr "Slicuj Vše" - msgid "Export G-code file" msgstr "Exportovat soubor s G-kódem" +msgid "Send" +msgstr "Odeslat" + msgid "Export plate sliced file" msgstr "Exportovat soubor slicované na podložce" @@ -4520,6 +5123,9 @@ msgstr "Vytisknout vše" msgid "Send all" msgstr "Odeslat vše" +msgid "Send to Multi-device" +msgstr "Odeslat na více zařízení" + msgid "Keyboard Shortcuts" msgstr "Klávesové zkratky" @@ -4554,10 +5160,6 @@ msgstr "Stáhnout modely" msgid "Default View" msgstr "Výchozí zobrazení" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Shora" - msgid "Top View" msgstr "Pohled svrchu" @@ -4580,15 +5182,9 @@ msgstr "Zezadu" msgid "Rear View" msgstr "Pohled zezadu" -msgid "Left" -msgstr "Zleva" - msgid "Left View" msgstr "Pohled zleva" -msgid "Right" -msgstr "Zprava" - msgid "Right View" msgstr "Pohled zprava" @@ -4604,8 +5200,8 @@ msgstr "Vytvořit nový projekt" msgid "Open a project file" msgstr "Otevřít soubor s projektem" -msgid "Recent projects" -msgstr "Nedávné projekty" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Uložit projekt" @@ -4616,9 +5212,6 @@ msgstr "Uložit aktuální projekt do souboru" msgid "Save Project as" msgstr "Uložit projekt jako" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Uložit aktuální projekt jako" @@ -4652,8 +5245,8 @@ msgstr "" msgid "Export Generic 3MF" msgstr "Exportovat generický 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exportovat soubor 3mf bez použití některých rozšíření 3mf" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exportovat soubor 3MF bez použití některých rozšíření 3mf" msgid "Export current sliced file" msgstr "Exportovat aktuální Slicovaný soubor" @@ -4667,6 +5260,9 @@ msgstr "Exportovat G-kód" msgid "Export current plate as G-code" msgstr "Exportovat stávající plochu do G-kód" +msgid "Export toolpaths as OBJ" +msgstr "Exportovat trasy extruderu jako OBJ" + msgid "Export Preset Bundle" msgstr "" @@ -4718,6 +5314,12 @@ msgstr "Vybráno klonování" msgid "Clone copies of selections" msgstr "Klonovat kopie výběrů" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "Vybrat vše" @@ -4736,16 +5338,24 @@ msgstr "Použít perspektivní pohled" msgid "Use Orthogonal View" msgstr "Použít ortogonální zobrazení" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4757,18 +5367,27 @@ msgstr "" msgid "Show &Labels" msgstr "Zobrazit &Popisky" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Zobrazit popisky objektů ve 3D scéně" msgid "Show &Overhang" msgstr "Zobrazit &Převis" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "Zobrazit zvýraznění převisů objektu ve 3D scéně" +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." +msgstr "" + msgid "Preferences" msgstr "Nastavení" +msgid "View" +msgstr "Zobrazení" + msgid "Help" msgstr "Nápověda" @@ -4787,6 +5406,18 @@ msgstr "Postup 2" msgid "Flow rate test - Pass 2" msgstr "Test průtoku - Postup 2" +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" + msgid "Flow rate" msgstr "Průtok" @@ -4796,27 +5427,33 @@ msgstr "Předstih tlaku" msgid "Retraction test" msgstr "Test Retrakce" -msgid "Orca Tolerance Test" -msgstr "Orca Test Tolerance" - msgid "Max flowrate" msgstr "Max. průtok" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Více..." - msgid "Tutorial" msgstr "Výukový program" msgid "Calibration help" msgstr "Nápověda ke kalibraci" -msgid "More calibrations" -msgstr "Další kalibrace" - msgid "&Open G-code" msgstr "&Otevřít G-kód" @@ -4832,9 +5469,6 @@ msgstr "Znovu načíst podložku z disku" msgid "Export &Toolpaths as OBJ" msgstr "Exportovat &Trasy extruderu jako OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Exportovat trasy extruderu jako OBJ" - msgid "Open &Slicer" msgstr "Otevřít &Studio" @@ -4857,17 +5491,20 @@ msgstr "&Zobrazení" msgid "&Help" msgstr "&Pomoc" -#, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +#, fuzzy, c-format, boost-format +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "Existuje soubor se stejným názvem: %s, chcete jej přepsat." -#, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." +#, fuzzy, c-format, boost-format +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "Existuje konfigurace se stejným názvem: %s, chcete ji přepsat." msgid "Overwrite file" msgstr "Přepsat soubor" +msgid "Overwrite config" +msgstr "" + msgid "Yes to All" msgstr "Ano všem" @@ -4923,13 +5560,13 @@ msgid "Filament Settings" msgstr "Nastavení Filamentu" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Chcete synchronizovat svá osobní data z Bambu Cloud? \n" +"Chcete synchronizovat svá osobní data z Bambu Cloud?\n" "Obsahuje následující informace:\n" "1. Předvolby procesu\n" "2. Předvolby filamentu\n" @@ -4958,7 +5595,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "" -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" msgid "" @@ -4975,15 +5612,15 @@ msgid "Connection Failed. Please check the network and try again" msgstr "" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "" -msgid "Stopped." -msgstr "Zastaveno." +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Připojení LAN se nezdařilo (nepodařilo se spustit živé zobrazení)" @@ -5020,6 +5657,9 @@ msgstr "Informace" msgid "Playing..." msgstr "Hraje..." +msgid "Loading..." +msgstr "Načítání..." + msgid "Year" msgstr "Rok" @@ -5038,6 +5678,9 @@ msgstr "Seskupit soubory podle měsíce, poslední první." msgid "Show all files, recent first." msgstr "Zobrazit všechny soubory, poslední první." +msgid "Timelapse" +msgstr "Časosběr" + msgid "Switch to timelapse files." msgstr "Přepnout na soubory časosběru." @@ -5047,8 +5690,9 @@ msgstr "Video" msgid "Switch to video files." msgstr "Přepnout na video soubory." -msgid "Switch to 3mf model files." -msgstr "Přepnout na 3mf modelové soubory." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Přepnout na 3MF modelové soubory." msgid "Delete selected files from printer." msgstr "Smazat vybrané soubory z tiskárny." @@ -5074,10 +5718,6 @@ msgstr "" msgid "No printers." msgstr "Žádné tiskárny." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Spojení selhalo [%d]!" - msgid "Loading file list..." msgstr "Načítání seznamu souborů..." @@ -5087,27 +5727,17 @@ msgstr "" msgid "Load failed" msgstr "" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Inicializace se nezdařila (Připojení zařízení není připraveno)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" - msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inicializace se nezdařila (%s)!" - #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" @@ -5128,7 +5758,7 @@ msgstr "Chcete smazat soubor '%s' z tiskárny?" msgid "Delete file" msgstr "Smazat soubor" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Načítání informací o modelu ..." msgid "Failed to fetch model information from printer." @@ -5138,8 +5768,8 @@ msgid "Failed to parse model information." msgstr "" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "Soubor .gcode.3mf neobsahuje žádná G-kód data. Prosím, slicujte ho pomocí " "Snapmaker Orcau a exportujte nový soubor .gcode.3mf." @@ -5170,11 +5800,17 @@ msgstr "Stahování dokončeno" msgid "Downloading %d%%..." msgstr "Stahování %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "" @@ -5184,13 +5820,47 @@ msgstr "" msgid "Not supported on the current printer version." msgstr "Není podporováno ve stávající verzi tiskárny." -msgid "Storage unavailable, insert SD card." -msgstr "Úložiště není k dispozici, vložte SD kartu." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Rychlost:" @@ -5230,11 +5900,84 @@ msgstr "Obrátit osu Náklonu" msgid "Invert Roll axis" msgstr "Obrátit osu Rotace" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Vyhledávání" + +msgid "My Device" +msgstr "Moje zařízení" + +msgid "Other Device" +msgstr "Jiné zařízení" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Zadejte přístupový kód" + +msgid "Can't find my devices?" +msgstr "Nemohu najít moje zařízení?" + +msgid "Log out successful." +msgstr "Odhlášení proběhlo úspěšně." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Zaneprázdněn" + +msgid "Modifying the device name" +msgstr "Úprava názvu zařízení" + +msgid "Name is invalid;" +msgstr "Jméno je neplatné;" + +msgid "illegal characters:" +msgstr "nepovolené znaky:" + +msgid "illegal suffix:" +msgstr "nelegální přípona:" + +msgid "The name is not allowed to be empty." +msgstr "Název nesmí být prázdný." + +msgid "The name is not allowed to start with space character." +msgstr "Název nesmí začínat mezerou." + +msgid "The name is not allowed to end with space character." +msgstr "Název nesmí končit mezerou." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Průběh tisku" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Zastavit" msgid "Layer: N/A" msgstr "Vrstva: N/A" @@ -5263,8 +6006,8 @@ msgstr "Ohodnotit" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "SD karta" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Nastavení Kamery" @@ -5281,35 +6024,41 @@ msgstr "" msgid "Print Options" msgstr "Možnosti tisku" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Lampa" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Komora" - msgid "Bed" msgstr "Podložka" msgid "Debug Info" msgstr "Informace o ladění" -msgid "No SD Card" -msgstr "Žádná SD karta" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD karta Abnormální" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Zrušit tisk" -msgid "Are you sure you want to cancel this print?" -msgstr "Opravdu chcete zrušit tento tisk?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Tiskárna je zaneprázdněna jinou tiskovou úlohou." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Stahuji..." @@ -5330,15 +6079,13 @@ msgid "Layer: %d/%d" msgstr "Vrstva: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -msgid "Still unload" -msgstr "Stále vysunovat" - -msgid "Still load" -msgstr "Stále zavádět" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Před kalibrací vyberte slot AMS" @@ -5365,8 +6112,19 @@ msgstr "Sport" msgid "Ludicrous" msgstr "Směšné" -msgid "Can't start this without SD card." -msgstr "Nelze to spustit bez SD karty." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Ohodnoťte tiskový profil" @@ -5389,13 +6147,10 @@ msgstr "Odeslat" msgid "Please click on the star first." msgstr "Prosím, nejprve klikněte na hvězdu." -msgid "InFo" -msgstr "Informace" - msgid "Get oss config failed." msgstr "Získání konfigurace OSS se nezdařilo." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Nahrát obrázky" msgid "Number of images successfully uploaded" @@ -5410,7 +6165,7 @@ msgstr " nahrávání konfigurace se nepodařilo zpracovat\n" msgid " No corresponding storage bucket\n" msgstr " Žádný odpovídající úložný prostor\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " nelze otevřít\n" msgid "" @@ -5436,7 +6191,7 @@ msgid "obtaining instance_id failed\n" msgstr "získání instance_id selhalo\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5450,7 +6205,7 @@ msgstr "chybová zpráva: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5458,7 +6213,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Některé z vašich obrázků se nepodařilo nahrát. Chcete přesměrovat na webovou " "stránku pro hodnocení?" @@ -5468,7 +6223,7 @@ msgstr "Můžete vybrat až 16 obrázků." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Je vyžadován alespoň jeden úspěšný tiskový záznam tohoto tiskového profilu \n" "pro udělení pozitivního hodnocení (4 nebo 5 hvězdiček)." @@ -5476,12 +6231,22 @@ msgstr "" msgid "Status" msgstr "Stav" +msgctxt "Firmware" msgid "Update" -msgstr "Aktualizovat" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Znovu Nezobrazovat" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s chyba" @@ -5509,11 +6274,11 @@ msgstr "%s informace" msgid "Skip" msgstr "Přeskočit" -msgid "Newer 3mf version" -msgstr "Novější verze 3mf" +msgid "Newer 3MF version" +msgstr "Novější verze 3MF" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5523,10 +6288,10 @@ msgstr "" msgid "Download Beta Version" msgstr "" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " @@ -5535,9 +6300,32 @@ msgstr "" msgid "Latest Version: " msgstr "" +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "" +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" + msgid "3D Mouse disconnected." msgstr "3D myš odpojena." @@ -5602,11 +6390,18 @@ msgstr[2] "%1$d Objektů má barevné malování." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d objekt byl načten jako součást rozříznutého objektu." msgstr[1] "%1$d objekty byly načteny jako součást rozříznutého objektu." msgstr[2] "%1$d objekty byly načteny jako součást rozříznutého objektu." +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" +msgstr[2] "" + msgid "ERROR" msgstr "CHYBA" @@ -5628,7 +6423,7 @@ msgstr "Chyba:" msgid "Warning:" msgstr "Varování:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Export úspěšně." msgid "Model file downloaded." @@ -5646,10 +6441,10 @@ msgstr " Klikněte zde pro instalaci." msgid "WARNING:" msgstr "VAROVÁNÍ:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Váš model potřebuje podpěry ! Povolte prosím podpůrný materiál." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Překrytí cesty G-kódu" msgid "Support painting" @@ -5698,12 +6493,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Spodní" -msgid "Enable AI monitoring of printing" -msgstr "Povolit AI monitorování tisku" - -msgid "Sensitivity of pausing is" -msgstr "Citlivost pauzy je" - msgid "Enable detection of build plate position" msgstr "Povolit detekci polohy stavební desky" @@ -5714,35 +6503,106 @@ msgstr "" "Je detekována lokalizační značka stavební desky a tisk se pozastaví, pokud " "značka není v předdefinovaném rozsahu." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Povolit AI monitorování tisku" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Kontrola první vrstvy" msgid "Auto-recovery from step loss" msgstr "Automatické obnovení po ztrátě kroku" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Povolit zvuky upozornění" msgid "Filament Tangle Detect" msgstr "" -msgid "Nozzle Clumping Detection" -msgstr "" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" msgid "Nozzle Type" msgstr "" -msgid "Stainless Steel" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" msgstr "" msgid "Hardened Steel" msgstr "" -#, c-format, boost-format -msgid "%.1f" +msgid "Stainless Steel" +msgstr "" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." msgstr "" msgid "Global" @@ -5778,6 +6638,9 @@ msgstr "Odemknout aktuální podložku" msgid "Lock current plate" msgstr "Zamknout aktuální podložku" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5787,6 +6650,31 @@ msgstr "" msgid "Customize current plate" msgstr "Přizpůsobit aktuální podložku" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " podložka %1%:" @@ -5815,14 +6703,67 @@ msgstr "Odhadovaný čas" msgid "Filament changes" msgstr "Výměna filamentu" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Klikněte pro editaci přednastavení" msgid "Connection" msgstr "Připojení" -msgid "Bed type" -msgstr "Typ podložky" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Čistící objem" @@ -5845,47 +6786,29 @@ msgstr "" msgid "Pellets" msgstr "" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Žádné filamenty AMS. Chcete-li načíst informace AMS, vyberte tiskárnu na " -"stránce Zařízení." - -msgid "Sync filaments with AMS" -msgstr "Synchronizovat filamenty s AMS" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"Synchronizace filamentů s AMS zruší všechny aktuálně vybrané předvolby " -"filamentů a barvy. Chcete pokračovat?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Synchronizace již proběhla, chcete synchronizovat pouze změny nebo znovu " -"synchronizovat Všechno?" - -msgid "Sync" -msgstr "Synchronizovat" - -msgid "Resync" -msgstr "Znovu synchronizovat" msgid "There are no compatible filaments, and sync is not performed." msgstr "" "Neexistují žádná kompatibilní filamenty a synchronizace není provedena." +msgid "Sync filaments with AMS" +msgstr "Synchronizovat filamenty s AMS" + msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Existují některé neznámé filamenty na mapovaná na generickou předvolbu. " -"Aktualizujte prosím Snapmaker Orca nebo restartujte Snapmaker Orca a zkontrolujte, " -"zda existuje aktualizace systému předvolby." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -5893,15 +6816,15 @@ msgstr "Chcete uložit změny do \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Odpojení proběhlo úspěšné. Zařízení %s(%s) lze nyní bezpečně odebrat z " "počítače." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Vysunutí zařízení %s(%s) se nezdařilo." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Byly zjištěny dříve neuložené položky. Chcete je obnovit?" @@ -5934,72 +6857,103 @@ msgstr "" "Povolení tradičního časosběrného fotografování může způsobit povrchové " "nedokonalosti. Doporučuje se přepnout na hladký režim." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Rozbalit postranní panel" msgid "Collapse sidebar" msgstr "Sbalit postranní panel" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Načítání souboru: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" "Formát 3MF není podporován programem Snapmaker Orca, lze načíst pouze " "geometrická data." -msgid "Load 3mf" -msgstr "Načíst 3mf" +msgid "Load 3MF" +msgstr "Načíst 3MF" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." msgstr "" -"Verze 3mf %s je novější než verze %s %s, byly nalezeny následující klíče " + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "" +"Verze 3MF %s je novější než verze %s %s, byly nalezeny následující klíče " "nerozpoznaný:" msgid "You'd better upgrade your software.\n" msgstr "Měli byste aktualizovat software.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Verze %s zařízení 3mf je novější než verze %s %s, navrhněte upgrade vašeho " +"Verze %s zařízení 3MF je novější než verze %s %s, navrhněte upgrade vašeho " "software." -msgid "Invalid values found in the 3mf:" -msgstr "V 3mf byly nalezeny neplatné hodnoty:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"3mf je generován starým Snapmaker Orcaem, načtěte pouze geometrická data." + +msgid "Invalid values found in the 3MF:" +msgstr "V 3MF byly nalezeny neplatné hodnoty:" msgid "Please correct them in the param tabs" msgstr "Opravte je prosím na kartách parametrů" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "" +"3mf má následující úpravy G-kódu v předvolbách filamentu nebo tiskárny:" + +msgid "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "" + +msgid "Modified G-code" +msgstr "" + +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" -msgstr "" - -msgid "Modified G-codes" -msgstr "" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "" - -msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" +"Potvrďte prosím, že G-kód v těchto předvolbách je bezpečný, aby nedošlo k " +"poškození stroje!" msgid "Customized Preset" -msgstr "" +msgstr "Přizpůsobená Předvolba" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Názvy součástí v souboru kroku nejsou ve formátu UTF8!" msgid "The name may show garbage characters!" @@ -6048,12 +7002,23 @@ msgstr "Načíst tyto soubory jako jeden objekt s více částmi?\n" msgid "Object with multiple parts was detected" msgstr "Byl detekován objekt s více částmi" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Soubor neobsahuje žádná geometrická data." +#, fuzzy msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Váš objekt se zdá být příliš velký, chcete jej zmenšit, aby se vešel na " "vyhřívanou podložku automaticky?" @@ -6115,6 +7080,34 @@ msgstr "Vyberte nový soubor" msgid "File for the replace wasn't selected" msgstr "Soubor pro nahrazení nebyl vybrán" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Vyberte prosím soubor" @@ -6160,11 +7153,22 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Režim pouze náhled:\n" "Načtený soubor obsahuje pouze gkód, nelze vstoupit na stránku Příprava" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "Upravené předvolby si můžete ponechat pro nový projekt nebo je zahodit" @@ -6189,13 +7193,13 @@ msgstr "Uložit projekt" msgid "Importing Model" msgstr "Import modelu" -msgid "prepare 3mf file..." -msgstr "připravte soubor 3mf..." +msgid "prepare 3MF file..." +msgstr "připravte soubor 3MF..." msgid "Download failed, unknown file format." msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "stahuji projekt ..." msgid "Download failed, File size exception." @@ -6211,13 +7215,23 @@ msgid "" msgstr "" "Import do Snapmaker Orcau selhal. Stáhněte soubor a proveďte jeho ruční import." +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "Importovat SLA archiv" msgid "The selected file" msgstr "Vybraný soubor" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "neobsahuje platný G-kód." msgid "Error occurs while loading G-code file" @@ -6257,10 +7271,10 @@ msgstr "Najednou lze otevřít pouze jeden soubor s G-kódem." msgid "G-code loading" msgstr "Načítání G-kódu" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Soubory G-kódu a modely nelze načíst společně!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Nelze přidat modely v režimu náhledu!" msgid "All objects will be removed, continue?" @@ -6298,6 +7312,12 @@ msgstr "" "Soubor %s byl odeslán do úložného prostoru tiskárny a lze jej zobrazit na " "tiskárně." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -6326,24 +7346,15 @@ msgstr "" "Nelze provést logickou operaci nad mashí modelů. Budou exportovány pouze " "kladné části." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Jste si jisti, že chcete do souboru 3MF uložit původní SVG s lokální cestou " -"k souboru?\n" -"Pokud stisknete \"NE\", všechny SVG v projektu již nebude možné upravovat." - -msgid "Private protection" -msgstr "Ochrana soukromí" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "Je tiskárna připravená k tisku? Je podložka prázdná a čistá?" msgid "Upload and Print" msgstr "Nahrát a Tisknout" +msgid "Abnormal print file data. Please slice again" +msgstr "Abnormální data tiskového souboru. Prosím znovu slicovat" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6362,10 +7373,35 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "Vlastní podpěry a barevné malby byly před opravou odstraněny." msgid "Optimize Rotation" +msgstr "Optimalizovat Orientaci" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." msgstr "" -msgid "Invalid number" -msgstr "Neplatné číslo" +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Nastavení Podložky" @@ -6406,9 +7442,6 @@ msgstr "Objem %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Trojúhelníky: %1%\n" -msgid "Tips:" -msgstr "Tipy:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6418,14 +7451,40 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Plate% d: %s se nedoporučuje používat k tisku filamentu %s(%s). Pokud Přesto " +"Plate %d: %s se nedoporučuje používat k tisku filamentu %s(%s). Pokud Přesto " "chcete tento tisk provést, nastavte prosím teplotu podložky tohoto filamentu " "ne na nulovou." +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + msgid "Switching the language requires application restart.\n" msgstr "Přepínání jazyků vyžaduje restartování aplikace.\n" @@ -6441,18 +7500,51 @@ msgstr "Přepínání jazyka aplikace při změně některých předvoleb." msgid "Changing application language" msgstr "Změna jazyka aplikace" +msgid "Asia-Pacific" +msgstr "Asie-Pacifik" + +msgid "China" +msgstr "Čína" + +msgid "Europe" +msgstr "Evropa" + +msgid "North America" +msgstr "Severní Amerika" + +msgid "Others" +msgstr "Ostatní" + msgid "Changing the region will log out your account.\n" msgstr "Změna regionu vás odhlásí z vašeho účtu.\n" msgid "Region selection" msgstr "Výběr regionu" -msgid "Second" -msgstr "Sekund" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Doba zálohování v sekundách." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "Procházet" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "Vyberte adresář pro stahování" @@ -6471,40 +7563,8 @@ msgstr "" msgid "Current Instance Path: " msgstr "" -msgid "General Settings" -msgstr "Obecná nastavení" - -msgid "Asia-Pacific" -msgstr "Asie-Pacifik" - -msgid "China" -msgstr "Čína" - -msgid "Europe" -msgstr "Evropa" - -msgid "North America" -msgstr "Severní Amerika" - -msgid "Others" -msgstr "Ostatní" - -msgid "Login Region" -msgstr "Región přihlášení" - -msgid "Stealth Mode" -msgstr "Tajný Režim" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" - -msgid "Enable network plugin" -msgstr "" - -msgid "Check for stable updates only" -msgstr "" +msgid "General" +msgstr "Obecné" msgid "Metric" msgstr "Metrický" @@ -6515,6 +7575,18 @@ msgstr "Imperiální" msgid "Units" msgstr "Jednotky" +msgid "Home" +msgstr "Home" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Enable dark mode" +msgstr "Povolit tmavý režim" + msgid "Allow only one Snapmaker Orca instance" msgstr "" @@ -6533,13 +7605,104 @@ msgid "" "instead." msgstr "" -msgid "Home" -msgstr "Home" +msgid "Show splash screen" +msgstr "Zobrazovat úvodní obrazovku" -msgid "Default Page" +msgid "Show the splash screen during startup." +msgstr "Zobrazit úvodní obrazovku během spuštění." + +msgid "Downloads folder" msgstr "" -msgid "Set the page opened on startup." +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Automatické zálohování" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Zálohujte svůj projekt pravidelně pro obnovu při případném pádu programu." + +msgid "Preset" +msgstr "Předvolba" + +msgid "Remember printer configuration" +msgstr "" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Všechny" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" msgstr "" msgid "Touchpad" @@ -6554,6 +7717,12 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" msgstr "Přiblížit na pozici myši" @@ -6570,95 +7739,114 @@ msgstr "" "Pokud je povoleno, použijte volnou kameru. Pokud není povoleno, použijte " "omezenou kameru." -msgid "Reverse mouse zoom" +msgid "Swap pan and rotate mouse buttons" +msgstr "Prohodit tlačítka pro posouvání a otáčení myši" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." msgstr "" +"Pokud je tato možnost povolena, prohodí levé a pravé tlačítko myši pro " +"funkce posouvání a otáčení." + +msgid "Reverse mouse zoom" +msgstr "Zvětšení/zmenšení myší v opačném směru" msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "Pokud je povoleno, obrací směr přiblížení kolečkem myši." + +msgid "Clear my choice on..." msgstr "" -msgid "Show splash screen" -msgstr "Zobrazovat úvodní obrazovku" - -msgid "Show the splash screen during startup." +msgid "Unsaved projects" msgstr "" -msgid "Show \"Tip of the day\" notification after start" -msgstr "Zobrazovat \"Tip dne\" po spuštění" +msgid "Clear my choice on the unsaved projects." +msgstr "Vymazat moje volby pro neuložené projekty." -msgid "If enabled, useful hints are displayed at startup." -msgstr "Pokud je povoleno, při spuštění se zobrazí užitečné rady." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Unsaved presets" msgstr "" -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "" - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "" - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" - -msgid "Remember printer configuration" -msgstr "" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" - -msgid "Network" -msgstr "Síť" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Automatická synchronizace uživatelských předvoleb (Tiskárna/Filament/Proces)" - -msgid "User Sync" -msgstr "Synchronizace uživatelů" - -msgid "Update built-in Presets automatically." -msgstr "Automaticky aktualizovat vestavěné předvolby." - -msgid "System Sync" -msgstr "Synchronizace systému" - msgid "Clear my choice on the unsaved presets." msgstr "Vymazat mé volby neuložených předvoleb." +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "Región přihlášení" + +msgid "Stealth mode" +msgstr "Tajný režim" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" + +msgid "Network test" +msgstr "" + +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Automatická synchronizace uživatelských předvoleb (Tiskárna/Filament/Proces)" + +msgid "Update built-in Presets automatically." +msgstr "Automaticky aktualizovat vestavěné předvolby." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + msgid "Associate files to Snapmaker Orca" msgstr "Přidružit soubory k Snapmaker Orca" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Přidružit soubory .3mf k Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Pokud je povoleno, nastaví Snapmaker Orca jako výchozí aplikaci pro otevírání " "souborů .3mf" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Přidružit .stl soubory k Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Pokud je povoleno, nastaví Snapmaker Orca jako výchozí aplikaci pro otevírání " "souborů .stl" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Přidružit soubory .step/.stp k Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Pokud je povoleno, nastaví Snapmaker Orca jako výchozí aplikaci pro otevírání " "souborů .step" @@ -6666,55 +7854,51 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "" -msgid "Associate URLs to Snapmaker Orca" +msgid "Developer" msgstr "" -msgid "Maximum recent projects" -msgstr "Maximální počet nedávných projektů" - -msgid "Maximum count of recent projects" -msgstr "Maximální počet nedávných projektů" - -msgid "Clear my choice on the unsaved projects." -msgstr "Vymazat moje volby pro neuložené projekty." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "" - -msgid "Auto-Backup" -msgstr "Automatické zálohování" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Zálohujte svůj projekt pravidelně pro obnovu při případném pádu programu." - -msgid "every" -msgstr "každých" - -msgid "The peroid of backup in seconds." -msgstr "Doba zálohování v sekundách." - -msgid "Downloads" -msgstr "Stahování" - -msgid "Dark Mode" -msgstr "Tmavý režim" - -msgid "Enable Dark mode" -msgstr "Povolit tmavý režim" - msgid "Develop mode" msgstr "Režim vývojáře" msgid "Skip AMS blacklist check" msgstr "Přeskočit kontrolu černé listiny AMS" -msgid "Home page and daily tips" -msgstr "Domovská stránka a denní tipy" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Zobrazit domovskou stránku při spuštění" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Úroveň protokolu" + +msgid "fatal" +msgstr "fatální" + +msgid "error" +msgstr "chyba" + +msgid "warning" +msgstr "varování" + +msgid "debug" +msgstr "ladit" + +msgid "trace" +msgstr "stopa" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Nastavení synchronizace" @@ -6755,24 +7939,6 @@ msgstr "Povolit SSL (FTP)" msgid "Internal developer mode" msgstr "Interní vývojářský režim" -msgid "Log Level" -msgstr "Úroveň protokolu" - -msgid "fatal" -msgstr "fatální" - -msgid "error" -msgstr "chyba" - -msgid "warning" -msgstr "varování" - -msgid "debug" -msgstr "ladit" - -msgid "trace" -msgstr "stopa" - msgid "Host Setting" msgstr "Nastavení hostitele" @@ -6794,10 +7960,10 @@ msgstr "tlačítko uložení ladění" msgid "save debug settings" msgstr "uložit nastavení ladění" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "Nastavení LADĚNÍ byla úspěšně uložena!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Přepněte cloudové prostředí, přihlaste se prosím znovu!" msgid "System presets" @@ -6809,14 +7975,20 @@ msgstr "Uživatelská přednastavení" msgid "Incompatible presets" msgstr "Nekompatibilní předvolby" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS Filament" -msgid "Click to pick filament color" -msgstr "Kliknutím vyberte barvu Filamentu" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Vyberte prosím barvu vlákna" +msgid "Click to select filament color" +msgstr "Kliknutím vyberte barvu Filamentu" msgid "Add/Remove presets" msgstr "Přidat/Odebrat přednastavení" @@ -6827,18 +7999,33 @@ msgstr "Upravit přednastavení" msgid "Project-inside presets" msgstr "Předvolby uvnitř projektu" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Přidání/Odebrání filamentů" msgid "Add/Remove materials" msgstr "Přidání/Odebrání materiálů" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "" msgid "Create printer" msgstr "" +msgid "Empty" +msgstr "Prázdný" + +msgid "Incompatible" +msgstr "Nekompatibilní" + msgid "The selected preset is null!" msgstr "Vybrané přednastavení je nula!" @@ -6857,6 +8044,12 @@ msgstr "" msgid "Plate name" msgstr "Název Podložky" +msgid "Same as Global Plate Type" +msgstr "Stejné jako Globální Typ podložky" + +msgid "Bed type" +msgstr "Typ podložky" + msgid "Same as Global Print Sequence" msgstr "Stejné jako globální tisková sekvence" @@ -6875,9 +8068,6 @@ msgstr "Spirálová váza" msgid "First layer filament sequence" msgstr "Sekvence filamentu první vrstvy" -msgid "Same as Global Plate Type" -msgstr "Stejné jako Globální Typ podložky" - msgid "Same as Global Bed Type" msgstr "Stejné jako globální typ Podložky" @@ -6896,28 +8086,28 @@ msgstr "Odhlásit se" msgid "Slice all plate to obtain time and filament estimation" msgstr "Slicujte všechny podložky, abyste získali odhad času a filamentu" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "Zabalení dat projektu do souboru 3mf" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Nahrávání 3mf" msgid "Jump to model publish web page" msgstr "Přejít na webovou stránku pro publikování modelu" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Poznámka: Příprava může trvat několik minut. Buďte prosím trpěliví." msgid "Publish" msgstr "Publikovat" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Publikování bylo zrušeno" msgid "Slicing Plate 1" msgstr "Slicuj Podložku 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Zabalení dat do 3mf" msgid "Jump to webpage" @@ -6936,7 +8126,7 @@ msgstr "Projekt uvnitř přednastavení" msgid "Name is unavailable." msgstr "Jméno není k dispozici." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "Přepsání systémového profilu není povoleno" #, boost-format @@ -6944,11 +8134,13 @@ msgid "Preset \"%1%\" already exists." msgstr "Předvolba \" %1% \" již existuje." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" "Předvolba \"%1%\" již existuje a není kompatibilní s aktuální tiskárnou." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "Upozorňujeme, že akce uložení nahradí toto přednastavení" msgid "The name cannot be the same as a preset alias name." @@ -6984,33 +8176,6 @@ msgstr "Jednoduše přepněte na \"%1%\"" msgid "Task canceled" msgstr "Úloha zrušena" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Vyhledávání" - -msgid "My Device" -msgstr "Moje zařízení" - -msgid "Other Device" -msgstr "Jiné zařízení" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Zadejte přístupový kód" - -msgid "Can't find my devices?" -msgstr "Nemohu najít moje zařízení?" - -msgid "Log out successful." -msgstr "Odhlášení proběhlo úspěšně." - -msgid "Busy" -msgstr "Zaneprázdněn" - msgid "Bambu Cool Plate" msgstr "Bambu Cool Podložka" @@ -7029,14 +8194,53 @@ msgstr "High temperature Podložka" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" -msgstr "Odeslat tiskovou úlohu na" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Kalibrace Dynamiky Průtoku" -msgid "Click here if you can't connect to the printer" -msgstr "Klikněte sem, pokud se nemůžete připojit k tiskárně" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "odeslat dokončeno" @@ -7044,56 +8248,15 @@ msgstr "odeslat dokončeno" msgid "Error code" msgstr "Chybový kód" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Žádný přihlašovací účet, jsou zobrazeny pouze tiskárny v režimu LAN" - -msgid "Connecting to server" -msgstr "Připojování k serveru" - -msgid "Synchronizing device information" -msgstr "Synchronizuji informace o zařízení" - -msgid "Synchronizing device information time out" -msgstr "Vypršel časový limit synchronizace informací o zařízení" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "Nelze odeslat tiskovou úlohu, když tiskárna aktualizuje firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "Tiskárna provádí pokyny. Po dokončení restartujte tisk" - -msgid "The printer is busy on other print job" -msgstr "Tiskárna je zaneprázdněna jinou tiskovou úlohou" +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s překračuje počet AMS slotů. Aktualizujte prosím tiskárnu " -"firmware pro podporu přiřazení slotu AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament překračuje počet slotů AMS. Aktualizujte prosím firmware tiskárny " -"pro podporu přiřazení slotů AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Mapování filamentů na sloty AMS byla vytvořena. Můžete kliknout na Filament " -"nahoře pro změnu jeho mapovacího slotu AMS" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Kliknutím na každý filament výše určete jeho mapovací slot AMS před odeslání " -"tiskové úlohy" #, c-format, boost-format msgid "" @@ -7110,37 +8273,13 @@ msgstr "" "Filament se neshoduje s filamentem ve slotu AMS. Aktualizujte prosím " "tiskárnu firmware pro podporu přiřazení slotu AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Firmware tiskárny podporuje pouze sekvenční mapování filamentu => AMS slot." - -msgid "An SD card needs to be inserted before printing." -msgstr "Před tiskem je třeba vložit SD kartu." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Pro záznam časosběru je třeba vložit SD kartu." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Nelze odeslat tiskovou úlohu na tiskárnu, jejíž firmware je vyžadován k " -"získání aktualizováno." - -msgid "Cannot send the print job for empty plate" -msgstr "Nelze odeslat tiskovou úlohu pro prázdnou podložku" - -msgid "This printer does not support printing all plates" -msgstr "Tato tiskárna nepodporuje tisk všech podložek" - msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." @@ -7149,17 +8288,25 @@ msgstr "" "časosběrná videa." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" msgid "Errors" msgstr "Chyby" -msgid "Please check the following:" -msgstr "Zkontrolujte prosím následující:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7175,25 +8322,8 @@ msgstr "" "to požadované filamenty. Pokud jsou v pořádku, stiskněte \"Potvrdit\" pro " "zahájení tisku." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" +msgid "Please check the following:" +msgstr "Zkontrolujte prosím následující:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7204,27 +8334,205 @@ msgstr "" "Pokud stále chcete pokračovat v tisku, klikněte prosím na tlačítko Potvrdit." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "Připojování k tiskárně. Nelze zrušit během procesu připojování." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgstr "" -"Pozor při použití! Kalibrace průtoku na Texturované PEI podložce může selhat " -"kvůli rozptýlenému povrchu." - -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatická kalibrace průtoku pomocí Mikro Lidar" - -msgid "Modifying the device name" -msgstr "Úprava názvu zařízení" - -msgid "Bind with Pin Code" +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -msgid "Send to Printer SD card" -msgstr "Odeslat do tiskárny SD kartu" +msgid "Preparing print job" +msgstr "Příprava tiskové úlohy" + +msgid "The name length exceeds the limit." +msgstr "Délka názvu překračuje limit." + +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" + +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Klikněte sem, pokud se nemůžete připojit k tiskárně" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Žádný přihlašovací účet, jsou zobrazeny pouze tiskárny v režimu LAN" + +msgid "Connecting to server..." +msgstr "Připojování k serveru" + +msgid "Synchronizing device information..." +msgstr "Synchronizuji informace o zařízení" + +msgid "Synchronizing device information timed out." +msgstr "Vypršel časový limit synchronizace informací o zařízení." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "Nelze odeslat tiskovou úlohu, když tiskárna aktualizuje firmware" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "Tiskárna provádí pokyny. Po dokončení restartujte tisk" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Nelze odeslat tiskovou úlohu na tiskárnu, jejíž firmware je vyžadován k " +"získání aktualizováno." + +msgid "Cannot send a print job for an empty plate." +msgstr "Nelze odeslat tiskovou úlohu pro prázdnou podložku" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Tato tiskárna nepodporuje tisk všech podložek" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Nelze odeslat tiskovou úlohu, když probíhá aktualizace" @@ -7233,14 +8541,14 @@ msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" "Vybraná tiskárna není kompatibilní s vybranými přednastaveními tiskárny." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Před odesláním na SD kartu do tiskárny je třeba vložit SD kartu." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Tiskárna musí být ve stejné síti LAN jako Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "Tiskárna nepodporuje odesílání na SD kartu tiskárny." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Slicování Dokončeno." @@ -7298,7 +8606,7 @@ msgstr "" msgid "Log in printer" msgstr "Přihlaste se k tiskárně" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Chcete se přihlásit k této tiskárně pomocí aktuálního účtu?" msgid "Check the reason" @@ -7311,10 +8619,10 @@ msgid "Terms and Conditions" msgstr "Obchodní podmínky" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Děkujeme za zakoupení zařízení Bambu Lab. Před použitím svého zařízení Bambu " @@ -7344,11 +8652,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "V komunitě 3D tisku se učíme z úspěchů a neúspěchů ostatních, abychom mohli " "upravit naše vlastní parametry a nastavení pro slicování. %s následuje " @@ -7398,14 +8706,29 @@ msgid "Click to reset all settings to the last saved preset." msgstr "Kliknutím obnovíte všechna nastavení na poslední uloženou předvolbu." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Pro hladký průběh časové roviny je vyžadována čistící věž. Mohou být chyby " "na model bez čistící věže. Opravdu chcete hlavní věž deaktivovat?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "Pro hladký časosběr je vyžadována čistící věž. Na model bez hlavní věže. " @@ -7415,43 +8738,38 @@ msgid "Still print by object?" msgstr "" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Přidali jsme experimentální styl \" Tree Slim \" , který obsahuje menší " -"podporovat objem, ale slabší sílu.\n" -"Doporučujeme jej používat s: 0 vrstvami rozhraní, 0 horní vzdáleností, 2 " -"stěnami." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Při použití podpůrného materiálu pro kontaktní vrstvu podpěr doporučujeme " +"následující nastavení:\n" +"0 horní Z vzdálenost, 0 rozestup rozhraní, koncentrický vzor a vypnutí " +"nezávislé výšky podpůrné vrstvy." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Změnit tato nastavení automaticky? \n" +"Změnit tato nastavení automaticky?\n" "Ano – tato nastavení změnit automaticky\n" "Ne - tato nastavení za mě neměňte" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Pro styly \"Tree Strong\" a \"Tree Hybrid\" doporučujeme následující " -"nastavení: alespoň 2 vrstvy rozhraní, alespoň 0,1 mm horní z vzdálenost nebo " -"používání podpůrných materiálů na rozhraní." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Při použití podpůrného materiálu pro kontaktní vrstvu podpěr doporučujeme " -"následující nastavení:\n" -"0 horní z vzdálenost, 0 rozestup rozhraní, koncentrický vzor a vypnutí " -"nezávislé výšky podpůrné vrstvy" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7462,6 +8780,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7469,10 +8795,10 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "" msgid "Adjust" @@ -7483,16 +8809,16 @@ msgstr "Ignorovat" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" msgid "" @@ -7506,6 +8832,82 @@ msgstr "" "klikněte pravým tlačítkem na prázdnou pozici stavební desky a vyberte " "\"Přidat primitivní\" -> \"Timelapse Wipe Tower\" ." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "Bude vytvořena oddělená kopie aktuálního systémového přednastavení." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Aktuální vlastní přednastavení bude odděleno od rodičovského systémového " +"přednastavení." + +msgid "Modifications to the current profile will be saved." +msgstr "Úpravy aktuálního profilu budou uloženy." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Tato akce není vratná.\n" +"Chcete pokračovat?" + +msgid "Detach preset" +msgstr "Oddělení přednastavení" + +msgid "This is a default preset." +msgstr "Toto je výchozí přednastavení." + +msgid "This is a system preset." +msgstr "Toto je systémové přednastavení." + +msgid "Current preset is inherited from the default preset." +msgstr "Aktuální nastavení je zděděno z výchozího nastavení." + +msgid "Current preset is inherited from" +msgstr "Aktuální nastavení je zděděné od" + +msgid "It can't be deleted or modified." +msgstr "Nelze smazat nebo upravit." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Jakékoliv úpravy by měly být uloženy jako nové přednastavení zděděná z " +"tohoto." + +msgid "To do that please specify a new name for the preset." +msgstr "" +"Chcete-li akci provést, prosím nejdříve zadejte nový název přednastavení." + +msgid "Additional information:" +msgstr "Doplňující informace:" + +msgid "vendor" +msgstr "výrobce" + +msgid "printer model" +msgstr "model tiskárny" + +msgid "default print profile" +msgstr "výchozí tiskový profil" + +msgid "default filament profile" +msgstr "výchozí profil filamentu" + +msgid "default SLA material profile" +msgstr "výchozí profil pro SLA materiál" + +msgid "default SLA print profile" +msgstr "výchozí SLA tiskový profil" + +msgid "full profile name" +msgstr "celé jméno profilu" + +msgid "symbolic profile name" +msgstr "symbolické jméno profilu" + msgid "Line width" msgstr "Šířka Extruze" @@ -7572,15 +8974,27 @@ msgstr "Raft" msgid "Support filament" msgstr "Filament na podpěry" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "Stromové podpěry" -msgid "Skirt" -msgstr "Obrys" +msgid "Multimaterial" +msgstr "Multimateriál" msgid "Prime tower" msgstr "Čistící věž" +msgid "Filament for Features" +msgstr "" + +msgid "Ooze prevention" +msgstr "Prevence odkapávání" + +msgid "Skirt" +msgstr "Obrys" + msgid "Special mode" msgstr "Speciální režim" @@ -7588,7 +9002,7 @@ msgid "G-code output" msgstr "Výstup G-kódu" msgid "Post-processing Scripts" -msgstr "Post-processing Scripts" +msgstr "" msgid "Notes" msgstr "Poznámky" @@ -7637,42 +9051,50 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" "Doporučený rozsah teploty trysky tohoto filamentu. 0 znamená nenastaveno" +msgid "Flow ratio and Pressure Advance" +msgstr "" + msgid "Print chamber temperature" msgstr "Teplota v tiskové komoře" msgid "Print temperature" msgstr "Teplota tisku" -msgid "Nozzle" -msgstr "Tryska" - msgid "Nozzle temperature when printing" msgstr "Teplota trysky při tisku" -msgid "Cool plate" -msgstr "Cool podložka" +msgid "Cool Plate (SuperTack)" +msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" +msgstr "Cool Podložka" + +msgid "" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Toto je teplota podložky, když je Cool podložka. Hodnota 0 znamená, že " "filament nepodporuje tisk na Cool Podložku" -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -msgid "Engineering plate" -msgstr "Engineering podložka" +msgid "Engineering Plate" +msgstr "Engineering Podložka" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Teplota podložky při instalaci Engineering podložky. Hodnota 0 znamená " "filament nepodporuje tisk na Engineering Podložku" @@ -7681,9 +9103,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Smooth PEI Podložka / High Temp Podložka" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Teplota podložky, když je nainstalována Smooth PEI Podložka/High temperature " "Podložka. Hodnota 0 znamená, že filament není podporován pro tisk na Smooth " @@ -7693,8 +9115,8 @@ msgid "Textured PEI Plate" msgstr "Textured PEI Podložka" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Teplota podložky při instalaci Textured PEI Podložky. Hodnota 0 znamená " "filament nepodporuje tisk na Textured PEI Podložku" @@ -7702,9 +9124,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Omezení objemové rychlosti" -msgid "Cooling" -msgstr "Chlazení" - msgid "Cooling for specific layer" msgstr "Chlazení pro konkrétní vrstvu" @@ -7753,25 +9172,34 @@ msgstr "Filament Začátek G-kók" msgid "Filament end G-code" msgstr "Filament Konec G-kód" -msgid "Multimaterial" -msgstr "Multimateriál" - msgid "Wipe tower parameters" msgstr "Parametry čistící věže" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Parametry při výměně (Multi Material s jedním extruderem)" -msgid "Ramming settings" -msgstr "Nastavení rapidní extruze" +msgid "Set" +msgstr "Nastavit" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Parametry při výměně (Multi Material s více extrudery)" +msgid "Dependencies" +msgstr "Závislosti" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Kompatibilní profily procesů" + msgid "Printable space" msgstr "Prostor pro tisk" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Neplatná hodnota zadaná pro parametr %1%: %2%" @@ -7794,7 +9222,7 @@ msgstr "" msgid "Accessory" msgstr "Příslušenství" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "G-kód stroje" msgid "Machine start G-code" @@ -7812,9 +9240,12 @@ msgstr "G-kód Před změnou vrstvy" msgid "Layer change G-code" msgstr "G-kód Změna vrstvy" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "Časosběrný G-kód" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "G-kód Změny filamentu" @@ -7833,6 +9264,12 @@ msgstr "Schopnost pohybu" msgid "Normal" msgstr "Normální" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Omezení rychlosti" @@ -7842,20 +9279,42 @@ msgstr "Omezení zrychlení" msgid "Jerk limitation" msgstr "Omezení Jerk-Ryv" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Nastavení multimateriálu s jedním extruderem" +msgid "Number of extruders of the printer." +msgstr "Počet extrudérů tiskárny." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Je zvolená Multi Materiálová tiskárna s jedním extruderem,\n" +"a proto všechny extrudery musí mít stejný průměr.\n" +"Chcete nastavit průměry všech extruderových trysek podle průměru prvního " +"extruderu?" + +msgid "Nozzle diameter" +msgstr "Průměr trysky" + msgid "Wipe tower" msgstr "Čistící věž" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Parametry jednoho multimateriálového extruderu" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" + msgid "Layer height limits" msgstr "Výškové limity vrstvy" -msgid "Lift Z Enforcement" -msgstr "Vynutit Zvednout Z" +msgid "Z-Hop" +msgstr "" msgid "Retraction when switching material" msgstr "Retrakce při změně materiálu" @@ -7872,6 +9331,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Firmware Retrakce" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Odpojeno" @@ -7881,7 +9348,7 @@ msgid "" "presets would be deleted if the printer is deleted." msgstr "" -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "" msgid "The following presets inherit this preset." @@ -7901,21 +9368,17 @@ msgstr[0] "Následující předvolba bude také smazána." msgstr[1] "Následující předvolby budou také smazány." msgstr[2] "" -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Opravdu chcete %1% vybrané předvolby?" -msgid "All" -msgstr "Všechny" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Nastavit" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8006,7 +9469,7 @@ msgstr "" "následující neuložené změny:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "" msgid "" @@ -8032,9 +9495,6 @@ msgstr "" msgid "Extruders count" msgstr "Počet extruderů" -msgid "General" -msgstr "Obecné" - msgid "Capabilities" msgstr "Možnosti" @@ -8096,6 +9556,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Název modelu" +msgid "Description:" +msgstr "Popis:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Aktualizace" @@ -8106,22 +9569,19 @@ msgstr "K dispozici je nová verze" msgid "Configuration update" msgstr "Aktualizace nastavení" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Je k dispozici nový konfigurační balíček. Chcete jej nainstalovat?" -msgid "Description:" -msgstr "Popis:" - msgid "Configuration incompatible" msgstr "Konfigurace není kompatibilní" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "konfigurační balíček je nekompatibilní s aktuální aplikací." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Konfigurační balíček není kompatibilní s aktuální aplikací.\n" "%s aktualizuje konfigurační balíček, aby umožnil spuštění aplikace" @@ -8130,9 +9590,6 @@ msgstr "" msgid "Exit %s" msgstr "Ukončit %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "konfigurační balíček je nekompatibilní s aktuální aplikací." - msgid "Configuration updates" msgstr "Aktualizace nastavení" @@ -8142,23 +9599,40 @@ msgstr "Žádné aktualizace nejsou dostupné." msgid "The configuration is up to date." msgstr "Konfigurace je aktuální." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." msgstr "" msgid "Specify number of colors:" msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" msgstr "" msgid "Recommended " msgstr "" -msgid "Current filament colors:" +msgid "view" msgstr "" -msgid "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" msgstr "" msgid "Color match" @@ -8170,26 +9644,170 @@ msgstr "" msgid "Append" msgstr "" -msgid "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" msgstr "" msgid "Reset mapped extruders." msgstr "" -msgid "Cluster colors" -msgstr "" - -msgid "Map Filament" +msgid "Note" msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" msgid "Ramming customization" @@ -8218,33 +9836,23 @@ msgstr "" "pravděpodobně povede k zaseknutí filamentu, vybroušení filamentu podávacím " "kolečkem, atd." -msgid "Total ramming time" -msgstr "Celkový čas rapidní extruze" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Pro konstantní průtok stiskněte %1% při přetahování." -msgid "s" -msgstr "s" - -msgid "Total rammed volume" -msgstr "Celkový objem rapidní extruze" - -msgid "Ramming line width" -msgstr "Šířka linky při rapidní extruzi" - -msgid "Ramming line spacing" -msgstr "Rozestup linek při rapidní extruzi" - -msgid "Auto-Calc" -msgstr "Automatický výpočet" - -msgid "Re-calculate" +msgid "Total ramming" msgstr "" -msgid "Flushing volumes for filament change" -msgstr "Čistící objemy pro výměnu filamentu" +msgid "Volume" +msgstr "" + +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -8258,23 +9866,23 @@ msgstr "Návrh: Objem čištění v rozsahu [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Násobitel by měl být v rozsahu [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Multiplikátor" -msgid "unloaded" -msgstr "vyjmuto" +msgid "Flushing volumes for filament change" +msgstr "Čistící objemy pro výměnu filamentu" -msgid "loaded" -msgstr "zaváděn" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Z" - -msgid "To" -msgstr "Do" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8288,7 +9896,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -8298,7 +9906,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" @@ -8326,12 +9934,6 @@ msgstr "Seznam objektů" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Import geometrických dat ze souborů STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Vložit ze schránky" @@ -8347,69 +9949,42 @@ msgstr "Zobrazit přehled klávesových zkratek" msgid "Global shortcuts" msgstr "Globální zkratky" -msgid "Rotate View" -msgstr "Otočit pohled" - msgid "Pan View" msgstr "Zobrazení panorama" -msgid "Mouse wheel" -msgstr "Kolečko myši" +msgid "Rotate View" +msgstr "Otočit pohled" msgid "Zoom View" msgstr "Zvětšit zobrazení" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Toto automaticky orientuje vybrané objekty nebo všechny objekty. Pokud jsou " "vybrány objekty, pouze zorientuje vybrané. Jinak zorientuje všechny objekty " -"v aktuální desce." +"v aktuálním projektu." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "" msgid "Collapse/Expand the sidebar" msgstr "Sbalit/Rozbalit postranní panel" -msgid "⌘+Any arrow" -msgstr "⌘+libovolná šipka" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Posun výběru v ortogonálním prostoru kamery" -msgid "⌥+Left mouse button" -msgstr "⌥+levé tlačítko myši" - msgid "Select a part" msgstr "Vyberte část" -msgid "⌘+Left mouse button" -msgstr "⌘+levé tlačítko myši" - msgid "Select multiple objects" msgstr "Vyberte více objektů" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+libovolná šipka" - -msgid "Alt+Left mouse button" -msgstr "Alt+levé tlačítko myši" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+levé tlačítko myši" - -msgid "Shift+Left mouse button" -msgstr "Shift+levé tlačítko myši" - msgid "Select objects by rectangle" msgstr "Vyberte objekty podle obdélníku" @@ -8437,9 +10012,6 @@ msgstr "Šipka vpravo" msgid "Move selection 10 mm in positive X direction" msgstr "Posunout výběr o 10 mm v kladném směru X" -msgid "Shift+Any arrow" -msgstr "Shift+libovolná šipka" - msgid "Movement step set to 1 mm" msgstr "Krok pro posun výběru o velikosti 1 mm" @@ -8473,17 +10045,23 @@ msgstr "Vybrat všechny objekty" msgid "Gizmo move" msgstr "Gizmo posuv" +msgid "Gizmo rotate" +msgstr "Gizmo rotace" + msgid "Gizmo scale" msgstr "Gizmo Měřítko" -msgid "Gizmo rotate" -msgstr "Gizmo rotace" +msgid "Gizmo place face on bed" +msgstr "Gizmo umístit plochou na podložku" msgid "Gizmo cut" msgstr "Gizmo řez" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Umístit plochou na podložku" +msgid "Gizmo mesh boolean" +msgstr "Gizmo booleovská síť" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "Gizmo SLA podpěrné body" @@ -8491,8 +10069,17 @@ msgstr "Gizmo SLA podpěrné body" msgid "Gizmo FDM paint-on seam" msgstr "Gizmo FDM malování pozice švu" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Text emboss / gravírování" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo text emboss/gravírování" + +msgid "Gizmo measure" +msgstr "Gizmo měření" + +msgid "Gizmo assemble" +msgstr "Gizmo sestavit" + +msgid "Gizmo brim ears" +msgstr "Gizmo uši límce" msgid "Zoom in" msgstr "Přiblížit" @@ -8509,32 +10096,20 @@ msgstr "Podložka" msgid "Move: press to snap by 1mm" msgstr "Posunout: stisknutím přitáhnete o 1 mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+kolečko myši" - msgid "Support/Color Painting: adjust pen radius" msgstr "Podpěry/Barva: upravit poloměr pera" -msgid "⌥+Mouse wheel" -msgstr "⌥+kolečko myši" - msgid "Support/Color Painting: adjust section position" msgstr "Podpěry/Barva: upravit polohu sekce" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+kolečko myši" - -msgid "Alt+Mouse wheel" -msgstr "Alt+kolečko myši" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Nastavit číslo extruderu pro objekty a díly" -msgid "Delete objects, parts, modifiers " -msgstr "Smazat objekty, díly, modifikátory " +msgid "Delete objects, parts, modifiers" +msgstr "Smazat objekty, díly, modifikátory" msgid "Select the object/part and press space to change the name" msgstr "Vyberte objekt/díl a stiskněte mezerník pro změnu názvu" @@ -8563,15 +10138,12 @@ msgstr "Horizontální posuvník - Pohyb aktivním ukazatelem vpravo" msgid "On/Off one layer mode of the vertical slider" msgstr "Zapnou/vypnout režim jedné vrstvy vertikálního posuvníku" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Zapnout/Vypnout okno g-kód" msgid "Move slider 5x faster" msgstr "Posunout posuvník 5x rychleji" -msgid "Shift+Mouse wheel" -msgstr "Shift+kolečko myši" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8582,7 +10154,7 @@ msgid "Release Note" msgstr "Poznámka k vydání" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "informace o aktualizaci verze %s:" msgid "Network plug-in update" @@ -8595,7 +10167,7 @@ msgstr "" "Sliceru." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Nový síťový plug-in (%s) k dispozici, chcete jej nainstalovat?" msgid "New version of Snapmaker Orca" @@ -8604,62 +10176,29 @@ msgstr "Nová verze Snapmaker Orca" msgid "Skip this Version" msgstr "" -msgid "Done" -msgstr "Hotovo" - -msgid "resume" -msgstr "" - -msgid "Resume Printing" -msgstr "" - -msgid "Resume Printing(defects acceptable)" -msgstr "" - -msgid "Resume Printing(problem solved)" -msgstr "" - -msgid "Stop Printing" -msgstr "" - -msgid "Check Assistant" -msgstr "" - -msgid "Filament Extruded, Continue" -msgstr "" - -msgid "Not Extruded Yet, Retry" -msgstr "" - -msgid "Finished, Continue" -msgstr "" - -msgid "Load Filament" -msgstr "Zavézt Filament" - -msgid "Filament Loaded, Resume" -msgstr "" - -msgid "View Liveview" -msgstr "" - msgid "Confirm and Update Nozzle" msgstr "" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Připojení k síti LAN se nezdařilo (odesílání tiskového souboru)" +msgid "Connect the printer using IP and access code" +msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Krok 1, potvrďte, že Snapmaker Orca a vaše tiskárna jsou ve stejné síti LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Krok 2, pokud se IP a přístupový kód níže liší od skutečných hodnot na " -"tiskárně, opravte je." msgid "IP" msgstr "IP" @@ -8667,18 +10206,42 @@ msgstr "IP" msgid "Access Code" msgstr "Přístupový kód" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "Kde najít IP a přístupový kód vaší tiskárny?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" msgstr "" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "" +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" + msgid "Connection failed, please double check IP and Access Code" msgstr "" @@ -8687,31 +10250,51 @@ msgid "" "please move to step 3 for troubleshooting network issues" msgstr "" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Model:" -msgid "Serial:" -msgstr "Sériové číslo:" - -msgid "Version:" -msgstr "Verze:" - msgid "Update firmware" msgstr "Aktualizovat firmware" msgid "Beta version" msgstr "" -msgid "Latest version" -msgstr "Nejnovější verze" - msgid "Updating" msgstr "Probíhá aktualizace" -msgid "Updating failed" +msgid "Update failed" msgstr "Aktualizace se nezdařila" -msgid "Updating successful" +msgid "Update successful" msgstr "Aktualizace úspěšná" msgid "" @@ -8742,8 +10325,8 @@ msgstr "" msgid "Extension Board" msgstr "Rozšiřující deska" -msgid "Saving objects into the 3mf failed." -msgstr "Ukládání objektů do 3mf se nezdařilo." +msgid "Saving objects into the 3MF failed." +msgstr "Ukládání objektů do 3MF se nezdařilo." msgid "Only Windows 10 is supported." msgstr "Podporován je pouze Windows 10." @@ -8766,23 +10349,23 @@ msgstr "Oprava se nezdařila." msgid "Loading repaired objects" msgstr "Načítání opravených objektů" -msgid "Exporting 3mf file failed" -msgstr "Export souboru 3mf se nezdařil" +msgid "Exporting 3MF file failed" +msgstr "Export souboru 3MF se nezdařil" -msgid "Import 3mf file failed" -msgstr "Import souboru 3mf se nezdařil" +msgid "Import 3MF file failed" +msgstr "Import souboru 3MF se nezdařil" -msgid "Repaired 3mf file does not contain any object" -msgstr "Opravený soubor 3mf neobsahuje žádný objekt" +msgid "Repaired 3MF file does not contain any object" +msgstr "Opravený soubor 3MF neobsahuje žádný objekt" -msgid "Repaired 3mf file contains more than one object" -msgstr "Opravený soubor 3mf obsahuje více než jeden objekt" +msgid "Repaired 3MF file contains more than one object" +msgstr "Opravený soubor 3MF obsahuje více než jeden objekt" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Opravený soubor 3mf neobsahuje žádný svazek" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Opravený soubor 3MF neobsahuje žádný svazek" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Opravený soubor 3mf obsahuje více než jeden svazek" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Opravený soubor 3MF obsahuje více než jeden svazek" msgid "Repair finished" msgstr "Oprava dokončena" @@ -8832,7 +10415,13 @@ msgid "No object can be printed. Maybe too small" msgstr "Nelze vytisknout žádný objekt. Možná je příliš malý" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Váš tisk je velmi blízko čistícím oblastem. Zajistěte, aby nedošlo ke kolizi." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Nepodařilo se vygenerovat G-kód pro neplatný vlastní G-kód.\n" @@ -8845,6 +10434,15 @@ msgstr "Zkontrolujte prosím vlastní G-kód nebo použijte výchozí vlastní G msgid "Generating G-code: layer %1%" msgstr "Generování G-kódu: vrstva %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Vnitřní stěna" @@ -8882,7 +10480,7 @@ msgid "Multiple" msgstr "Vícenásobné" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Nepodařilo se vypočítat šířku extruze %1%. Nelze získat hodnotu \"%2%\" " @@ -9000,13 +10598,15 @@ msgstr "%1% je příliš blízko ostatním a může dojít ke kolizím." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% je příliš vysoké a budou způsobeny kolize." -msgid " is too close to others, there may be collisions when printing." -msgstr " je příliš blízko ostatním, při tisku může docházet ke kolizím." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " je příliš blízko oblasti vyloučení, při tisku může docházet ke kolizím." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Čistící Věž" @@ -9017,12 +10617,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr " je příliš blízko oblasti vyloučení a dojde ke kolizi.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Nelze tisknout více filamentů, které mají velké teplotní rozdíly společně. " -"Jinak může dojít k zablokování nebo poškození extruderu a trysky během tisku" msgid "No extrusions under current settings." msgstr "Žádné extruze pod aktuálním nastavením." @@ -9034,6 +10656,15 @@ msgstr "" "Plynulý režim časosběru není podporován, když \"podle objektu\" sekvence je " "povoleno." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9047,6 +10678,14 @@ msgid "" msgstr "" "Režim spirálové vázy nefunguje, když objekt obsahuje více než jeden materiál." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Ačkoli samotný objekt %1% se vejde do tiskového objemu, kvůli kompenzaci " +"smrštění materiálu přesahuje maximální výšku tiskového objemu." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Objekt %1% přesahuje maximální výšku tiskového objemu." @@ -9070,8 +10709,9 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Variabilní výška vrstvy není podporována s organickými podpěrami." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" msgid "" @@ -9082,8 +10722,11 @@ msgstr "" "exruderu (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" +"Prevence odkapávání filamentu je podporována pouze u čistící věže, když je " +"vypnuta funkce 'single_extruder_multi_material'." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9100,21 +10743,27 @@ msgstr "" "Čistící Věž není podporována, když je zapnutá výška adaptivní vrstvy. " "Vyžaduje že všechny objekty mají stejnou výšku vrstvy." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "Čistící věž vyžaduje, aby jakákoli \"podpěrná mezera\" byla násobkem výšky " "vrstvy" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "Čistící věž vyžaduje, aby všechny objekty měly stejnou výšku vrstvy" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Čistící věž vyžaduje, aby byly všechny objekty vytištěny přes stejné číslo z " "raftových vrstev" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9124,17 +10773,28 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "Čistící věž je podporována pouze v případě, že všechny objekty mají stejnou " "proměnnou výšku vrstvy" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "Příliš malá šířka extruze" msgid "Too large line width" msgstr "Příliš velká šířka extruze" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9165,7 +10825,7 @@ msgstr "" "Vynucené podpěry jsou použity, ale podpěry nejsou povoleny. Povolte prosím " "podpěry." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "Výška vrstvy nemůže překročit průměr trysky" msgid "" @@ -9208,6 +10868,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9226,6 +10895,18 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Smrštění filamentu nebude použito, protože se smrštění u použitých filamentů " +"výrazně liší." + msgid "Generating skirt & brim" msgstr "Generování Obrysu a Límce" @@ -9238,9 +10919,15 @@ msgstr "Generování G-kódu" msgid "Failed processing of the filename_format template." msgstr "Zpracování šablony filename_format se nezdařilo." +msgid "Printer technology" +msgstr "Technologie tisku" + msgid "Printable area" msgstr "Oblast pro tisk" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Podložka mimo prostor" @@ -9263,8 +10950,8 @@ msgid "Elephant foot compensation" msgstr "Kompenzace rozplácnutí první vrstvy" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "Snižte první vrstvu na podložce, abyste kompenzovali efekt sloní nohy" msgid "Elephant foot compensation layers" @@ -9285,7 +10972,7 @@ msgstr "vrstva(y)" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Toto je výška každé vrstvy. Menší výšky vrstvy dávají větší přesnost, ale " "delší doba tisku" @@ -9293,13 +10980,21 @@ msgstr "" msgid "Printable height" msgstr "Výška pro tisk" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "Maximální tisknutelná výška, která je omezena mechanismem tiskárny" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -9308,7 +11003,7 @@ msgstr "Názvy přednastavení tiskáren" msgid "Use 3rd-party print host" msgstr "" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" msgid "Hostname, IP or URL" @@ -9331,7 +11026,7 @@ msgid "Device UI" msgstr "Uživatelské rozhraní zařízení" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Uveďte URL uživatelského rozhraní vašeho zařízení, pokud není stejné jako " "print_host" @@ -9346,7 +11041,7 @@ msgstr "" "Snapmaker Orca může nahrát soubory do tiskového serveru. Toto pole by mělo " "obsahovat klíč API požadovaný pro ověření." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Název tiskárny" msgid "HTTPS CA File" @@ -9379,7 +11074,7 @@ msgstr "" "offline distribučních bodů. Tuto možnost lze povolit pro certifikáty " "podepsané vlastním podpisem v případě, že se připojení nezdaří." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Názvy přednastavení souvisejících s fyzickou tiskárnou" msgid "Authorization Type" @@ -9391,22 +11086,23 @@ msgstr "API klíč" msgid "HTTP digest" msgstr "HTTP digest" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Vyhněte se přejíždění stěn" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Objeďte a vyhněte se přejíždění přes stěny, což může způsobit skvrny na " "povrchu" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Vyhněte se přejíždění stěn - Maximální délka objížďky" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Maximální vzdálenost objížďky pro vyhnutí se přejezdu přes stěny. " "Neobjíždějte, pokud vzdálenost objížďky je větší než tato hodnota. Lze zadat " @@ -9420,37 +11116,39 @@ msgid "Other layers" msgstr "Ostatní vrstvy" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Toto je teplota podložky pro vrstvy kromě první. Hodnota 0 znamená, že " "filament nepodporuje tisk na Cool Podložku" -msgid "°C" -msgstr "°C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Toto je teplota Podložky pro vrstvy kromě první. Hodnota 0 znamená, že " "Filament nepodporuje tisk na Engineering Podložku" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Toto je teplota Podložky pro vrstvy kromě první. Hodnota 0 znamená, že " "filament nepodporuje tisk na High Temp Podložku" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Toto je teplota Podložky pro vrstvy kromě první. Hodnota 0 znamená, že " "filament nepodporuje tisk na Textured PEI Podložku" @@ -9462,51 +11160,57 @@ msgid "Initial layer bed temperature" msgstr "Teplota podložky první vrstvy" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " "nepodporuje tisk na Cool Podložku" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " "nepodporuje tisk na Engineering Podložku" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " "nepodporuje tisk na High Temp Podložku" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " "nepodporuje tisk na Textured PEI Podložku" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Typy podložek podporované tiskárnou" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "Engineering Podložka" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" @@ -9521,7 +11225,7 @@ msgstr "" msgid "Other layers filament sequence" msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Tento G-kód se vkládá při každé změně vrstvy před zvednutím z" msgid "Bottom shell layers" @@ -9530,7 +11234,7 @@ msgstr "Spodní vrstvy skořepiny" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Toto je počet pevných vrstev spodní skořepiny, včetně spodní povrchové " "vrstvy. Když je tloušťka vypočítaná touto hodnotou tenčí než tloušťka spodní " @@ -9543,8 +11247,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Počet spodních pevných vrstev se při krájení zvýší, pokud je tloušťka " "vypočítaná podle spodních vrstev skořepiny tenčí než tato hodnota. Tím se " @@ -9556,14 +11260,31 @@ msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -9573,73 +11294,108 @@ msgid "Top and bottom surfaces" msgstr "" msgid "Nowhere" -msgstr "" +msgstr "Nikde" -msgid "Force cooling for overhang and bridge" -msgstr "Vynucené chlazení pro převisy a mosty" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Povolením této možnosti optimalizujete rychlost ventilátoru chlazení dílů " -"pro převis a most, abyste získali lepší chlazení" -msgid "Fan speed for overhang" -msgstr "Rychlost ventilátoru pro převisy" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Vynutit ventilátor chlazení na tuto rychlost, když tisknete most nebo " -"převislou stěnu, která má velký přesah. Vynucení chlazení převisu a mostu " -"může získat lepší kvalitu těchto dílů" -msgid "Cooling overhang threshold" -msgstr "Hranice chlazení převisů" +msgid "Overhang cooling activation threshold" +msgstr "" -#, fuzzy, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Vynutit chladicí ventilátor na určitou rychlost, když stupeň převisu " -"tištěného dílu překročí tuto hodnotu. Vyjádřeno v procentech, které udává, " -"jak velká šířka extruze bez podpěry spodní vrstvy. 0% znamená vynucení " -"chlazení pro celou vnější stěnu bez ohledu na míru převisu" -msgid "Bridge infill direction" -msgstr "Směr výplně mostu" +msgid "External bridge infill direction" +msgstr "" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Přepsání úhlu přemostění. Pokud je ponecháno na nule, úhel přemostění bude " "vypočítán automaticky. Jinak bude poskytnutý úhel použit pro vnější mosty. " "Pro nulový úhel použijte 180°." -msgid "Bridge density" -msgstr "Hustota mostu" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "Internal bridge infill direction" +msgstr "" + +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" -"Hustota externích mostů. 100 % znamená pevný most. Výchozí hodnota je 100 %." msgid "Bridge flow ratio" msgstr "Průtok mostu" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Snižte tuto hodnotu mírně (například 0,9), abyste snížili množství materiálu " -"pro most a zlepšili prověšení" msgid "Internal bridge flow ratio" msgstr "" @@ -9647,7 +11403,11 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9655,33 +11415,134 @@ msgstr "Poměr průtoku horní vrstvy" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Tento faktor ovlivňuje množství materiálu pro vrchní plnou výplň. Můžete jej " -"mírně snížit, abyste měli hladký povrch" msgid "Bottom surface flow ratio" msgstr "Poměr průtoku spodní vrstvy" -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "Tento faktor ovlivňuje množství materiálu pro spodní plnou výplň" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Precise wall" msgstr "Přesná stěna" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "Pouze jedna stěna na horních plochách" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Používejte pouze jednu stěnu na rovném horním povrchu, abyste získali více " "prostoru pro horní vzor výplně" @@ -9714,7 +11575,7 @@ msgstr "Pouze jedna stěna v první vrstvě" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Používejte pouze jednu stěnu na první vrstvě, abyste získali více prostoru " "pro spodní výplňový vzor" @@ -9724,20 +11585,20 @@ msgstr "Dodatečné perimetry u převisů" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" "Vytvořte další perimetry přes strmé převisy a oblasti, kde mosty nelze " -"ukotvit. " +"ukotvit." -msgid "Reverse on odd" -msgstr "Obrátit na lichých" +msgid "Reverse on even" +msgstr "" msgid "Overhang reversal" msgstr "Obrácení převisu" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9748,7 +11609,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9757,9 +11618,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9768,9 +11629,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9789,60 +11650,65 @@ msgstr "Hranice obrácení převisu" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Počet milimetrů, o které musí být převis pro zvážení, zda je obrácení " -"užitečné. Může to být určité % o z obvodové šířky.\n" -"Hodnota 0 umožňuje obrácení na každé liché vrstvě bez ohledu na jiné faktory." - -msgid "Classic mode" -msgstr "Klasický režim" - -msgid "Enable this option to use classic mode" -msgstr "Povolte tuto možnost pro použití klasického režimu" msgid "Slow down for overhang" msgstr "Zpomalení u převisů" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "Povolte tuto volbu pro zpomalení tisku pro různé stupně převisů" msgid "Slow down for curled perimeters" msgstr "Zpomalení pro zakroucené obvody" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Povolte tuto možnost pro zpomalení tisku na místech, kde mohou existovat " -"potenciální zakroucené obvody" msgid "mm/s or %" msgstr "mm/s or %" -msgid "External" -msgstr "Vnější" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Rychlost mostu a zcela převislé stěny" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" msgid "Internal" msgstr "Vnitřní" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Rychlost vnitřního mostu. Pokud je hodnota vyjádřena jako procento, bude " -"vypočítána na základě most_speed. Výchozí hodnota je 150 %." msgid "Brim width" msgstr "Šířka límce" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Vzdálenost od modelu k nejvzdálenějšímu okraji límce" msgid "Brim type" @@ -9850,7 +11716,7 @@ msgstr "Typ límce" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Toto ovládá generování límce na vnější a/nebo vnitřní straně modelů. Možnost " "Auto znamená, že šířka límce je automaticky analyzována a vypočítána." @@ -9860,7 +11726,7 @@ msgstr "Mezera mezi Límcem a Objektem" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Mezera mezi nejvnitřnějším límcem a předmětem může usnadnit odstranění límce" @@ -9874,8 +11740,8 @@ msgid "Brim ear max angle" msgstr "Maximální úhel uší límce" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Maximální úhel, při kterém se můžou objevit uši límce.\n" @@ -9886,30 +11752,45 @@ msgid "Brim ear detection radius" msgstr "Poloměr detekce uší límce" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "Geometrie bude zredukována před detekcí ostrých úhlů. Tento parametr udává " "minimální délku odchylky pro redukci.\n" "0 pro deaktivaci" -msgid "Compatible machine" -msgstr "Kompatibilní stroj" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "nahoru kompatibilní stroj" -msgid "Compatible machine condition" -msgstr "Stav kompatibilního stroje" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Kompatibilní profily procesů" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " +"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " +"kompatibilní s aktivním profilem tiskárny." -msgid "Compatible process profiles condition" -msgstr "Podmínka kompatibilních procesních profilů" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " +"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " +"kompatibilní s aktivním profilem tiskárny." + +msgid "Print sequence, layer by layer or object by object." msgstr "Tisková sekvence, vrstva po vrstvě nebo objekt po objektu" msgid "By layer" @@ -9921,7 +11802,7 @@ msgstr "Podle objektu" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -9934,7 +11815,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Povolením této možnosti zpomalíte rychlost tisku, aby se zkrátila doba " "poslední vrstvy ne kratší než časová hranice vrstvy v \"Hranice max " @@ -9946,22 +11827,19 @@ msgstr "Normální tisk" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "Výchozí zrychlení normálního tisku i pohybu kromě počáteční vrstvy" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Výchozí profil filamentu" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Výchozí profil filamentu při přepnutí na tento profil stroje" msgid "Default process profile" msgstr "Výchozí profil procesu" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Výchozí profil procesu při přepnutí na tento profil stroje" msgid "Activate air filtration" @@ -9974,21 +11852,21 @@ msgid "Fan speed" msgstr "Rychlost ventilátoru" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Rychlost odsávacího ventilátoru během tisku. Tato rychlost přepíše rychlost " "v g-kódu pro filament" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Rychlost odsávacího ventilátoru po dokončení tisku" msgid "No cooling for the first" msgstr "První bez chlazení" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Zavřete všechny chladicí ventilátory pro první určité vrstvy. Chladicí " "ventilátor první vrstvy býval uzavřen, aby se dosáhlo lepší přilnavosti " @@ -9998,14 +11876,14 @@ msgid "Don't support bridges" msgstr "Nevytvářet podpěry pod mosty" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Nepodpírejte celou oblast mostu, díky čemuž je podpěra velmi velká. Most " "obvykle může tisknout přímo bez podpěry, pokud není příliš dlouhý" -msgid "Thick bridges" -msgstr "Silné přemostění" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10026,41 +11904,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "Zakázáno" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -10082,18 +12001,18 @@ msgstr "" msgid "End G-code" msgstr "Konec G-kódu" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Konec G-kód po dokončení celého tisku" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Konec G-kód po dokončení tisku tohoto filamentu" msgid "Ensure vertical shell thickness" @@ -10119,24 +12038,24 @@ msgstr "" msgid "Top surface pattern" msgstr "Vzor horního povrchu" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Čárový vzor výplně horní plochy" -msgid "Concentric" -msgstr "Koncentrický" - -msgid "Rectilinear" -msgstr "Přímočarý" - msgid "Monotonic" msgstr "Monotónní" msgid "Monotonic line" msgstr "Monotónní linka" +msgid "Rectilinear" +msgstr "Přímočarý" + msgid "Aligned Rectilinear" msgstr "Zarovnaný přímočarý" +msgid "Concentric" +msgstr "Koncentrický" + msgid "Hilbert Curve" msgstr "Hilbertova křivka" @@ -10149,7 +12068,7 @@ msgstr "Oktagramová spirála" msgid "Bottom surface pattern" msgstr "Vzor spodního povrchu" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "Čárový vzor výplně spodní plochy, nikoli výplně mostů" msgid "Internal solid infill pattern" @@ -10194,7 +12113,7 @@ msgid "Small perimeters threshold" msgstr "Hranice malého perimetru" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Toto nastavuje hraniční hodnotu pro malou délku obvodu. Výchozí hranice je 0 " "mm" @@ -10203,10 +12122,10 @@ msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10216,15 +12135,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -10244,7 +12161,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10258,10 +12175,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -10347,10 +12264,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Barva extruderu" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Používá se pouze jako vizuální nápověda v uživatelském rozhraní" msgid "Extruder offset" @@ -10360,11 +12280,11 @@ msgid "Flow ratio" msgstr "Poměr průtoku" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Materiál může mít objemovou změnu po přepnutí mezi roztaveným a krystalickým " "stavem. Toto nastavení proporcionálně změní veškerý vytlačovací tok tohoto " @@ -10372,19 +12292,110 @@ msgstr "" "můžete tuto hodnotu vyladit, abyste získali pěkně rovný povrch, když dochází " "k mírnému přetečení nebo podtečení" +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" + msgid "Enable pressure advance" msgstr "Povolit předstih tlaku" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" "Povolte předstih tlaku, po povolení bude výsledek automatické kalibrace " "přepsán." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Předstih tlaku (Klipper) AKA Lineární faktor předstihu (Marlin)" +msgid "Enable adaptive pressure advance (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" + msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." @@ -10396,8 +12407,9 @@ msgid "Keep fan always on" msgstr "Ventilátor vždy zapnutý" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Pokud povolíte toto nastavení, ventilátor chlazení součástí se nikdy " "nezastaví a poběží alespoň na minimální rychlost, aby se snížila frekvence " @@ -10410,13 +12422,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -10425,7 +12435,7 @@ msgstr "Čas vrstvy" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Ventilátor chlazení části bude povolen pro vrstvy, jejichž odhadovaná doba " "je kratší než tato hodnota. Rychlost ventilátoru je interpolována mezi " @@ -10434,8 +12444,10 @@ msgstr "" msgid "Default color" msgstr "Výchozí barva" -msgid "Default filament color" -msgstr "Výchozí barva filamentu" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Poznámky k filamentu" @@ -10453,35 +12465,91 @@ msgstr "" "Minimální HRC trysky potřebné k tisku filamentu. Nula znamená žádnou " "kontrolu HRC trysky." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Toto nastavení znamená, kolik objemu filamentu lze roztavit a extrudováno za " "sekundu. Rychlost tisku je omezena maximální objemovou rychlostí, v případ " "příliš vysoké a nepřiměřené rychlosti nastavení. Nemůže být nula" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Doba zavádění filamentu" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Čas na zavedení nového filamentu při výměně filamentu. Pouze pro statistiku" msgid "Filament unload time" msgstr "Doba vysouvání filamentu" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" -"Čas vytažení starého filamentu při výměně filamentu. Pouze pro statistiku" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Průměr filamentu se používá k výpočtu extruze v gkódu, takže je důležitý a " "měl by být přesný" @@ -10490,7 +12558,7 @@ msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10499,13 +12567,25 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" -msgstr "Smrštění" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -10516,6 +12596,22 @@ msgstr "" "Ujistěte se aby byl mezi objekty dostatek prostoru, protože tato kompenzace " "se provádí po kontrolách." +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Rychlost zavádění" @@ -10532,7 +12628,7 @@ msgid "Unloading speed" msgstr "Rychlost vysunutí" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Rychlost vysouvání filamentu při výměně na čistící věži (úvodní část " @@ -10551,8 +12647,8 @@ msgid "Delay after unloading" msgstr "Zpoždění po vyjmutí" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Doba čekání po vysunutí filamentu. Může pomoci ke spolehlivé změně extruderu " @@ -10569,6 +12665,24 @@ msgstr "" "Filament je chlazen pohyby tam a zpět v chladicí trubičce. Zadejte " "požadovaný počet těchto pohybů." +msgid "Stamping loading speed" +msgstr "Rychlost vtlačení" + +msgid "Speed used for stamping." +msgstr "Rychlost používaná pro vtlačení" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Vzdálenost vtlačení měřená od středu chladicí trubičky" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Pokud je nastavena nenulová hodnota, filament se mezi jednotlivými pohyby " +"chlazení posouvá směrem k trysce (\"vtlačování\"). Tato volba určuje, jak " +"dlouho by měl tento pohyb trvat, než je znovu dojde k retrakci filamentu." + msgid "Speed of the first cooling move" msgstr "Rychlost prvního pohybu chlazení" @@ -10597,15 +12711,6 @@ msgstr "Rychlost posledního pohybu chlazení" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Chladící pohyby se postupně zrychlují až k této rychlosti." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí " -"nový filament během jeho výměny (při provádění kódu T). Tento čas je přidán " -"k celkové době tisku pomocí G-kódu odhadovače tiskového času." - msgid "Ramming parameters" msgstr "Parametry rapidní extruze" @@ -10616,23 +12721,14 @@ msgstr "" "Tento řetězec je upravován dialogem RammingDialog a obsahuje specifické " "parametry pro rapidní extruzi." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) vysouvá " -"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k " -"celkové době tisku pomocí G-kódu odhadovače tiskového času." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "Povolení rapidní extruze tiskárny s více nástroji" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Provedení rapidní extruze při použití tiskárny s více nástroji (tj. když " "není v nastavení tiskárny zaškrtnuto políčko Single Extruder Multimaterial). " @@ -10640,53 +12736,64 @@ msgstr "" "nástroje rychle vytlačeno malé množství filamentu. Tato volba se uplatní " "pouze tehdy, když je povolena čistící věž." -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "Objem rapidní extruze pro tiskárnu s více nástroji" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Objem, který se má před výměnou nástroje extrudovat." -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "Průtok při rapidní extruzi pro více nástrojů" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "Průtok pro rapidní extruzi před výměnou nástroje." msgid "Density" msgstr "Hustota" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Hustota Filamentu. Pouze pro statistiku" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Typ materiálu filamentu" msgid "Soluble material" msgstr "Rozpustný materiál" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Rozpustný materiál se běžně používá k tisku podpěr a kontaktní vrstvy podpěr" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Podpěry" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Materiál podpěr se běžně používá k tisku podpěr a kontaktní vrstvy podpěr" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Teplota měknutí" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Materiál při této teplotě měkne, takže když je teplota podložky rovna nebo " "vyšší než tato hodnota, vřele doporučujeme otevřít přední dvířka a/nebo " @@ -10695,7 +12802,7 @@ msgstr "" msgid "Price" msgstr "Cena" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Cena Filamentu. Pouze pro statistiku" msgid "money/kg" @@ -10704,7 +12811,7 @@ msgstr "Kč/kg" msgid "Vendor" msgstr "Výrobce" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Výrobce filamentu. Pouze pro zobrazení" msgid "(Undefined)" @@ -10715,7 +12822,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Úhel pro vzor vnitřní výplně, který řídí začátek nebo hlavní směr linky" @@ -10724,13 +12831,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10739,38 +12840,67 @@ msgstr "Hustota vnitřní výplně" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "Vzor vnitřní výplně" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Vzor linek pro vnitřní výplň" -msgid "Grid" -msgstr "Mřížka" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Čára" -msgid "Cubic" -msgstr "Kubický" +msgid "Grid" +msgstr "Mřížka" msgid "Tri-hexagon" msgstr "Tri-šestiúhelník" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Plástev" +msgid "Cubic" +msgstr "Kubický" msgid "Adaptive Cubic" msgstr "Kubický adaptivní" -msgid "3D Honeycomb" -msgstr "3D Plástev" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "Kubický podepíraný" @@ -10778,9 +12908,53 @@ msgstr "Kubický podepíraný" msgid "Lightning" msgstr "Blesky" +msgid "Honeycomb" +msgstr "Plástev" + +msgid "3D Honeycomb" +msgstr "3D Plástev" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroid" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "Délka kotvy vnitřní výplně" @@ -10792,7 +12966,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -10802,7 +12976,7 @@ msgstr "" "krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový " "perimetr kratší než infill_anchor_max, je výplňová čára spojena s obvodovým " "perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je " -"omezena na tento parametr, ale ne dále než anchor_length_max. \n" +"omezena na tento parametr, ale ne dále než anchor_length_max.\n" "Nastavením tohoto parametru na nulu deaktivujete kotvící perimetry připojené " "k jedné výplňové čáře." @@ -10823,7 +12997,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10833,30 +13007,30 @@ msgstr "" "krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový " "perimetr kratší než tento parametr, je výplňová čára spojena s obvodovým " "perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je " -"omezena na infill_anchor, ale ne delší než tento parametr. \n" +"omezena na infill_anchor, ale ne delší než tento parametr.\n" " Pokud je nastaveno na 0, použije se starý algoritmus pro výplň připojení, " "měl by vytvořit stejný výsledek jako s 1000 & 0." msgid "0 (Simple connect)" msgstr "0 (Jednoduché spojení)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Zrychlení vnějších stěny" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Zrychlení vnitřních stěn" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Zrychlení cestovních pohybů" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Zrychlení výplně horního povrchu. Použití nižší hodnoty může zlepšit kvalitu " "povrchu" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "Zrychlení vnější stěny. Použití nižší hodnoty může zlepšit kvalitu" msgid "" @@ -10886,7 +13060,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Zrychlení počáteční vrstvy. Použití nižší hodnoty může zlepšit lepidlo na " "vytvoření desky" @@ -10894,7 +13068,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Povolit accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper max_accel_to_decel bude upraven automaticky" msgid "accel_to_decel" @@ -10902,25 +13076,36 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper max_accel_to_decel bude upraven na toto %% o zrychlení" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk-Ryv na vnější stěny" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk-Ryv na vnitřní stěny" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Jerk-Ryv pro horní plochy" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Jerk-Ryv pro výplně" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Jerk-Ryv pro první vrstvu" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "Jerk-Ryv pro cestování" msgid "" @@ -10935,24 +13120,24 @@ msgstr "Výška první vrstvy" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Výška první vrstvy. Mírně tlustá první vrstva může zlepšit přilnavost k " "podložce" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Rychlost první vrstvy kromě plné výplně" msgid "Initial layer infill" msgstr "Výplň první vrstvy" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Rychlost plné výplně v první vrstvě" msgid "Initial layer travel speed" msgstr "Rychlost pohybu první vrstvy" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "Cestovní rychlost počáteční vrstvy" msgid "Number of slow layers" @@ -10968,7 +13153,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Teplota trysky první vrstvy" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "Teplota trysky pro tisk první vrstvy při použití tohoto filamentu" msgid "Full fan speed at layer" @@ -10994,19 +13179,39 @@ msgid "Support interface fan speed" msgstr "Rychlost ventilátoru kontaktních vrstev podpěr" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"Tato rychlost ventilátoru je uplatněna během všech kontaktních vrstev, aby " -"bylo možné oslabit jejich spojení vysokou rychlostí ventilátoru.\n" -"Nastavte hodnotu -1 pro zrušení tohoto přepisu.\n" -"Tuto hodnotu lze přepsat pouze pomocí disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Náhodné chvění při tisku na stěnu, takže povrch má hrubý vzhled. Toto " "nastavení řídí neostrou polohu" @@ -11024,8 +13229,8 @@ msgid "Fuzzy skin thickness" msgstr "Tloušťka členitého povrchu" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "Šířka, ve které se má chvět. Je nepřípustné, aby byla pod šířkou extruze " "vnější stěny" @@ -11034,15 +13239,104 @@ msgid "Fuzzy skin point distance" msgstr "Vzdálenosti bodů členitého povrchu" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Průměrná vzdálenost mezi náhodnými body zavedenými na každém segmentu linky" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Kombinovaný " + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "Klasický" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" @@ -11051,12 +13345,15 @@ msgstr "Odfiltrujte drobné mezery" msgid "Layers and Perimeters" msgstr "Vrstvy a perimetry" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtrovat mezery menší než stanovená hranice" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Rychlost vyplňování mezery. Mezera má obvykle nepravidelnou šířku extruze a " "měla by být vytištěna pomaleji" @@ -11065,7 +13362,7 @@ msgid "Precise Z height" msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11075,9 +13372,9 @@ msgstr "Přizpůsobení oblouku" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11087,7 +13384,8 @@ msgstr "" msgid "Add line number" msgstr "Přidat číslo řádku" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Povolte toto, chcete-li přidat číslo řádku (Nx) na začátek každého řádku G-" "kódu" @@ -11097,7 +13395,7 @@ msgstr "Skenovat první vrstvu" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Povolením této možnosti umožníte Kameře na tiskárně kontrolovat kvalitu " "první vrstvy" @@ -11107,7 +13405,7 @@ msgstr "Typ trysky" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Kovový materiál trysky. To určuje odolnost trysky proti otěru a jaký druh " "filamentu lze tisknout" @@ -11121,6 +13419,9 @@ msgstr "Kalená ocel" msgid "Stainless steel" msgstr "Nerezová ocel" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Mosaz" @@ -11139,7 +13440,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Struktura tiskárny" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Fyzické uspořádání a komponenty tiskového zařízení" msgid "CoreXY" @@ -11174,10 +13475,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Spustit ventilátor po tuto dobu v sekundách před cílovým časem spuštění " @@ -11216,7 +13517,7 @@ msgstr "" msgid "Time cost" msgstr "Náklady na čas" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "Náklady tiskárny za hodinu" msgid "money/h" @@ -11245,7 +13546,7 @@ msgstr "" msgid "G-code flavor" msgstr "Druh G-kódu" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "S jakým typem gkódu je tiskárna kompatibilní" msgid "Klipper" @@ -11254,20 +13555,20 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "Označování objektů" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11280,7 +13581,7 @@ msgstr "" msgid "Exclude objects" msgstr "Vynechat objekty" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "Povolit tuto možnost pro přidání příkazu VYNECHAT OBJEKT do g-kódu" msgid "Verbose G-code" @@ -11305,6 +13606,128 @@ msgstr "" "Automaticky zkombinujte vnitřní výplň několika vrstev pro tisk dohromady, " "abyste zkrátili čas. Stěna se stále tiskne s původní výškou vrstvy." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "Filament pro tisk vnitřní výplně." @@ -11333,21 +13756,27 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Rychlost vnitřní výplně" +msgid "Inherits profile" +msgstr "Zdědí profil" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" msgstr "Mezilehlé stěny" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Vynucení vytváření pevných skořepin mezi sousedními materiály/objemy. " "Užitečné pro tisk s více extrudery s průsvitnými materiály nebo ručně " @@ -11362,53 +13791,71 @@ msgstr "Maximální šířka segmentované oblasti. Nula tuto funkci vypne." msgid "Interlocking depth of a segmented region" msgstr "Hloubka propojení segmentované oblasti" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" +"Hloubka propojení segmentované oblasti. Bude ignorována, pokud je " +"\"mmu_segmented_region_max_width\" nulová nebo pokud je " +"\"mmu_segmented_region_interlocking_depth\" větší než " +"\"mmu_segmented_region_max_width\". Nula tuto funkci deaktivuje." msgid "Use beam interlocking" -msgstr "" +msgstr "Použít propojení materiálu paprsky" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Propojení materiálu paprsky (Interlocking) vytváří propojovací paprsky v " +"místech kontaktu různých filamentů, čímž zlepšuje jejich přilnavost, zejména " +"při tisku z různých materiálů." msgid "Interlocking beam width" -msgstr "" +msgstr "Šířka propojovacího paprsku" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "Šířka propojovacího paprsku (Interlocking Struktury)" msgid "Interlocking direction" -msgstr "" +msgstr "Směr propojovací struktury" msgid "Orientation of interlock beams." msgstr "" msgid "Interlocking beam layers" -msgstr "" +msgstr "Počet vrstev propojovacího paprsku" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"Definuje výšku paprsků propojení materiálu, udávanou v počtu vrstev " +"(Interlocking struktury). Méně vrstev zvyšuje pevnost, ale může způsobit " +"více vad." msgid "Interlocking depth" -msgstr "" +msgstr "Hloubka propojovacích paprsků" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"Vzdálenost od hranice mezi filamenty, ve které se generuje propojovací " +"struktura, měřená v buňkách. Příliš málo buněk zhorší přilnavost." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Odstup od hranice propojení" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"Vzdálenost od vnějšího okraje modelu, kde se nebudou vytvářet propojovací " +"struktury (interlocking), udávaná v buňkách." msgid "Ironing Type" msgstr "Způsob žehlení" @@ -11435,7 +13882,7 @@ msgstr "Všechny pevné vrstvy" msgid "Ironing Pattern" msgstr "Vzor Žehlení" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "Vzor, který bude použit při žehlení" msgid "Ironing flow" @@ -11443,7 +13890,7 @@ msgstr "Průtok žehlení" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Množství materiálu, které se má vytlačit během žehlení. V poměru k průtoku " "normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrné extruzi na " @@ -11452,34 +13899,47 @@ msgstr "" msgid "Ironing line spacing" msgstr "Řádkování žehlení" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Vzdálenost mezi žehlicími linkami" +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "Rychlost žehlení" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Rychlost tisku žehlících linek" -msgid "Ironing angle" -msgstr "Úhel žehlení" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"Úhel, pod kterým se provádí žehlení. Záporné číslo tuto funkci zakáže a " -"použije výchozí metodu." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "Tato část gkódu je vložena při každé změně vrstvy po zvednutí z" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Podporuje tichý režim" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Zda stroj podporuje tichý režim, ve kterém stroj používá k tisku nižší " "zrychlení" @@ -11492,23 +13952,23 @@ msgstr "Limity stroje" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Tento G-kód bude použit jako kód pro pozastavený tisk. Uživatel může vložit " "pauzu G-kód do prohlížeče gkódu" -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Tento G-kód bude použit jako vlastní kód" msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -11517,8 +13977,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -11593,6 +14053,15 @@ msgstr "Maximální Jerk-Ryv osy Z" msgid "Maximum jerk of the E axis" msgstr "Maximální Jerk-Ryv osy E" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Minimální rychlost pro extruzi" @@ -11620,26 +14089,42 @@ msgstr "Maximální zrychlení pro retrakci (M204 R)" msgid "Maximum acceleration for travel" msgstr "Maximální zrychlení pro cestování" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Maximální zrychlení pro cestování (M204 T), platí pouze pro Marlin 2" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Max" + +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "Rychlost ventilátoru chlazení součásti může být zvýšena, když je povoleno " "automatické chlazení. Toto je omezení maximální rychlosti ventilátoru " "chlazení součásti" -msgid "Max" -msgstr "Max" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Největší výška tisknutelné vrstvy pro extruder. Používá se k omezení " -"maximální výšky vrstvy při povolení adaptivní výšky vrstvy" msgid "Extrusion rate smoothing" msgstr "Vyhlazení rychlosti extruze" @@ -11650,23 +14135,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -11677,52 +14162,52 @@ msgstr "" "na extruzi s nižším průtokem (nižší rychlost/menší šířka) a naopak.\n" "\n" "Definuje maximální rychlost, kterou může objemový průtok extrudovaného " -"materiálu v mm3/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny " +"materiálu v mm³/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny " "větší změny extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n" "\n" -"Hodnota 0 funkci zakáže. \n" +"Hodnota 0 funkci zakáže.\n" "\n" "Pro tiskárny s přímým pohonem a vysokou rychlostí a průtokem (např. Bambu " "lab nebo Voron) tato hodnota obvykle není potřebná. Nicméně v některých " "případech, kde se rychlosti funkcí výrazně liší, může poskytnout marginální " "přínos. Například při agresivních zpomaleních způsobených přesahy. V těchto " -"případech se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to " +"případech se doporučuje vysoká hodnota kolem 300-350 mm³/s², protože to " "umožňuje dostatečné vyhlazení pro pomoc při dosažení plynulejšího přechodu " "tlaku při extruzi.\n" "\n" "Pro pomalejší tiskárny bez tlakového předstihu by měla být hodnota nastavena " -"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm3/s2 dobrým výchozím " -"bodem, a pro styl Bowden 5-10 mm3/s2. \n" +"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm³/s² dobrým výchozím " +"bodem, a pro styl Bowden 5-10 mm³/s².\n" "\n" "Tato funkce je známa jako Pressure Equalizer v programu Prusa Slicer.\n" "\n" "Poznámka: Tato hodnota zakazuje obloukové přizpůsobení." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "Délka úseku pro vyhlazení" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Nižší hodnota způsobí hladší přechody rychlosti extruze. To však má za " -"následek výrazně větší soubor G-kódu a více instrukcí pro tiskárnu. \n" -"\n" -"Výchozí hodnota 3 dobře funguje ve většině případů. Pokud vaše tiskárna má " -"problémy, zkuste zvýšit tuto hodnotu, abyste snížili počet úprav\n" -"\n" -"Povolené hodnoty: 1-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "Minimální rychlost ventilátoru chlazení dílů" msgid "" @@ -11738,29 +14223,21 @@ msgstr "" "Pro použití této funkce povolte ventilátor pro doplňkové chlazení v " "nastavení tiskárny. G-kódový příkaz: M106 P2 S(0-255)" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Nejnižší výška tisknutelné vrstvy pro extruder. Používá se k omezení " -"minimální výšky vrstvy při povolení adaptivní výšky vrstvy" msgid "Min print speed" msgstr "Minimální rychlost tisku" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Nozzle diameter" -msgstr "Průměr trysky" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Průměr trysky" msgid "Configuration notes" @@ -11786,7 +14263,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Objem trysky" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Objem trysky mezi frézou a koncem trysky" msgid "Cooling tube position" @@ -11831,7 +14308,7 @@ msgstr "Extra délka při zavádění" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Když je hodnota nastavena na nulu, vzdálenost o kterou se filament posune " @@ -11851,16 +14328,23 @@ msgstr "Omezení retrakcí ve výplni" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Omezte retrakce, když je pohyb v oblasti výplně absolutně. To znamená, že " "vytékání není vidět. To může zkrátit dobu retrakcí u složitého modelu a " "ušetřit čas tisku, ale zpomalit krájení a generování G-kódu" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Tato volba sníží teplotu neaktivních extruderů, aby u nich nedocházelo k " +"ukapávání filamentu." + msgid "Filename format" msgstr "Formát názvu souboru" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "Uživatel může sám definovat název souboru projektu při exportu" msgid "Make overhangs printable" @@ -11886,14 +14370,11 @@ msgstr "Oblast otvoru pro tisk převisu bez podpěr" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Maximální plocha otvoru v základně modelu před tím, než bude vyplněna " "kuželovým materiálem. Hodnota 0 vyplní všechny díry v základně modelu." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Detekovat převisy stěn" @@ -11905,6 +14386,9 @@ msgstr "" "Zjistěte procento převisů vzhledem k šířce extruze a použijte jinou rychlost " "tisku. Pro 100%% převisy se použije rychlost mostu." +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." @@ -11912,10 +14396,10 @@ msgstr "" "Šířka extruze vnitřní stěny. Pokud je vyjádřena jako %, vypočítá se vzhledem " "k průměru trysky." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Rychlost vnitřní stěny" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Počet perimetrů/stěn každé vrstvy" msgid "Alternate extra wall" @@ -11923,10 +14407,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11944,34 +14428,43 @@ msgstr "" "předána absolutní cesta k souboru G-kódu jako první argument a mohou přístup " "k nastavení konfigurace Snapmaker Orca čtením proměnných prostředí." +msgid "Printer type" +msgstr "Typ tiskárny" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" msgstr "Poznámky o tiskárně" msgid "You can put your notes regarding the printer here." msgstr "Zde můžete uvést poznámky týkající se tiskárny." +msgid "Printer variant" +msgstr "Varianta tiskárny" + msgid "Raft contact Z distance" msgstr "Mezera mezi objektem a raftem v ose Z" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "Mezera Z mezi objektem a raftem. Ignorováno pro rozpustné rozhraní" msgid "Raft expansion" msgstr "Rozšíření raftu" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Rozšířit všechny vrstvy raftu v rovině XY" msgid "Initial layer density" msgstr "Počáteční hustota vrstvy" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Hustota prvního vrstvy raftu nebo podpůrné vrstvy" msgid "Initial layer expansion" msgstr "Rozšíření první vrstvy" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Rozšiřte první raft nebo podpůrnou vrstvu pro zlepšení přilnavosti k podložce" @@ -11980,15 +14473,15 @@ msgstr "Vrstev raftu" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Objekt bude zvednut o tento počet podpůrných vrstev. Tuto funkci použijte, " "abyste se vyhnuli obtékání při tisku ABS" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Cesta G-kódu se generuje po zjednodušení obrysu modelu, aby se předešlo " "příliš velkému počtu bodů a Linek gkódu v souboru gkód. Menší hodnota " @@ -11999,7 +14492,7 @@ msgstr "Hranice cestovní vzdálenosti" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Spusťte retrakci pouze tehdy, když je dráha jízdy delší než tato hraniční " "hodnota" @@ -12008,13 +14501,13 @@ msgid "Retract amount before wipe" msgstr "Délka retrakce před očištěním" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "Délka rychlé retrakce před očištěním, vzhledem k délce retrakce" msgid "Retract when change layer" msgstr "Retrakce při změně vrstvy" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Vynutit retrakci při změně vrstvy" msgid "Retraction Length" @@ -12022,17 +14515,15 @@ msgstr "Vzdálenost retrakce" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Některé množství materiálu v extruderu je staženo zpět, aby se zabránilo " -"slizu při dlouhém pohybu. Nastavte nulu, abyste zablokovali retrakce" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" @@ -12041,44 +14532,53 @@ msgid "Retraction distance when cut" msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -msgid "Z hop when retract" -msgstr "Z hop při retrakci" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Kdykoli je retrakce provedena, tryska se trochu zvedne, aby se vytvořila " "mezera mezi tryskou a tiskem. Zabraňuje tomu, aby tryska zasáhla tisk při " "pohybu. Použití spirálové linky ke zvednutí z může zabránit stringování" -msgid "Z hop lower boundary" -msgstr "Dolní mez Z hop" +msgid "Z-hop lower boundary" +msgstr "Dolní mez Z-hop" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Zvýšení Z bude mít vliv na Z hop pouze tehdy, pokud je hodnota Z nad touto " -"mezí a zároveň podle parametru: \"Horní mez Z hop\"" +"Zvýšení Z bude mít vliv na Z-hop pouze tehdy, pokud je hodnota Z nad touto " +"mezí a zároveň podle parametru: \"Horní mez Z-hop\"" -msgid "Z hop upper boundary" -msgstr "Horní mez Z hop" +msgid "Z-hop upper boundary" +msgstr "Horní mez Z-hop" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Pokud je tato hodnota kladná, Z hop bude mít vliv pouze tehdy, pokud je " -"hodnota Z nad dolní mezí Z hop a zároveň pod touto hodnotou" +"Pokud je tato hodnota kladná, Z-hop bude mít vliv pouze tehdy, pokud je " +"hodnota Z nad dolní mezí Z-hop a zároveň pod touto hodnotou" -msgid "Z hop type" -msgstr "Typ Z hop" +msgid "Z-hop type" +msgstr "Typ Z-hop" + +msgid "Type of Z-hop." +msgstr "" msgid "Slope" msgstr "Sklon" @@ -12090,8 +14590,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -12118,10 +14618,10 @@ msgid "On surfaces" msgstr "Na površích" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"Povolit chování Z Hop. Tato volba je ovlivněna výše uvedenými nastaveními " +"Povolit chování Z-Hop. Tato volba je ovlivněna výše uvedenými nastaveními " "(Pouze zvednout Z nad/pod)." msgid "All Surfaces" @@ -12136,6 +14636,18 @@ msgstr "Pouze Spodní" msgid "Top and Bottom" msgstr "Horní a Spodní" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Extra vzdálenost při návratu" @@ -12156,18 +14668,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Rychlost Retrakce" -msgid "Speed of retractions" -msgstr "Rychlost Retrakce" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Rychlost Deretrakce" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Rychlost pro opětovné vkládání filamentu do extruderu. Nula znamená stejnou " -"rychlost jako pro retrakce" msgid "Use firmware retraction" msgstr "Použít retrakce z firmwaru" @@ -12187,13 +14697,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "Pozice švu" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Počáteční pozice pro tisk každé části vnější stěny" msgid "Nearest" @@ -12202,6 +14712,9 @@ msgstr "Nejbližší" msgid "Aligned" msgstr "Zarovnaný" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Zezadu" @@ -12274,13 +14787,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -12290,7 +14803,7 @@ msgid "This factor affects the amount of material for scarf joints." msgstr "" msgid "Scarf start height" -msgstr "" +msgstr "Počáteční výška Scarf-spoje" msgid "" "Start height of the scarf.\n" @@ -12328,9 +14841,10 @@ msgid "Role base wipe speed" msgstr "Rychlost čištění podle role" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "Rychlost čištění je určena rychlostí aktuální role extruze, např. pokud je " "činnost čištění provedena bezprostředně po extruzi vnější stěny, rychlost " @@ -12350,15 +14864,15 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" @@ -12366,9 +14880,9 @@ msgstr "Rychlost čištění" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "Rychlost čištění je určena nastavením rychlosti specifikovaným v této " "konfiguraci. Pokud je hodnota vyjádřena v procentech (např. 80%), bude " @@ -12378,42 +14892,67 @@ msgstr "" msgid "Skirt distance" msgstr "Vzdálenost obrysu" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Vzdálenost od Obrysu k Límci nebo předmětu" +msgid "Skirt start point" +msgstr "" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" + msgid "Skirt height" msgstr "Výška obrysu" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "Kolik vrstev Obrysu. Obvykle pouze jedna vrstva" +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" + msgid "Draft shield" msgstr "Ochranný štít" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" -msgstr "Omezeno" - msgid "Enabled" msgstr "Povoleno" +msgid "Skirt type" +msgstr "Typ obrysu" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Kombinovaný - jeden obrys pro všechny objekty, Individuální - každý objekt " +"má vlastní obrys." + +msgid "Per object" +msgstr "Individuální " + msgid "Skirt loops" msgstr "Obrysové smyčky" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "Počet smyček pro obrys. Nula znamená deaktivaci obrysu" msgid "Skirt speed" @@ -12430,13 +14969,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Rychlost tisku v exportovaném kódu gkód se zpomalí, když je odhadovaná doba " "vrstvy kratší než tato hodnota, aby se dosáhlo lepšího chlazení pro tyto " @@ -12447,11 +14989,17 @@ msgstr "Minimální hranice vnitřní výplně" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Řídká oblast výplně, která je menší než hraniční hodnota, je nahrazena " "vnitřní plnou výplní" +msgid "Solid infill" +msgstr "Plná výplň" + +msgid "Filament to print solid infill." +msgstr "" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." @@ -12459,13 +15007,13 @@ msgstr "" "Šířka extruze pro vnitřní výplň. Pokud je vyjádřena jako %, bude vypočtena " "vzhledem k průměru trysky." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "Rychlost vnitřní plné výplně, nikoli horní a spodní plochy" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Spiralize vyhlazuje pohyby z vnějšího obrysu. A přemění pevný model na " "jednostěnný tisk s pevnými spodními vrstvami. Konečný vygenerovaný model " @@ -12475,16 +15023,38 @@ msgid "Smooth Spiral" msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" msgid "Max XY Smoothing" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." msgstr "" msgid "" @@ -12511,19 +15081,44 @@ msgstr "Tradiční" msgid "Temperature variation" msgstr "Kolísání teploty" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "Začátek G-kódu" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Start G-kód při spuštění celého tisku" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Start G-kód při zahájení tisku tohoto filamentu" msgid "Single Extruder Multi Material" msgstr "MultiMaterial tisk s jedním extruderem" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "Použít jednu trysku pro tisk s více filamenty" msgid "Manual Filament Change" @@ -12544,18 +15139,18 @@ msgstr "" msgid "Purge in prime tower" msgstr "Očistit do čistící věže" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "Očistěte zbývající filament do čistící věže" msgid "Enable filament ramming" -msgstr "Povolit rapidní extruzi filamentu" +msgstr "" msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12625,33 +15220,40 @@ msgstr "Povolit podpěry" msgid "Enable support generation." msgstr "Povolit generování podpěr." +#, fuzzy msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"Normální(auto) a Strom(auto) se používají k automatickému generování podpěr. " -"Pokud je vybrána možnost Normální(manual) nebo Strom(manual), budou " -"generovány pouze vynucené podpěry" +"Normální (auto) a Strom (auto) se používají k automatickému generování " +"podpěr. Pokud je vybrána možnost Normální (manual) nebo Strom (manual), " +"budou generovány pouze vynucené podpěry." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "Normální (auto)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "Strom (auto)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "Normální (manuální)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "Strom (manuální)" -msgid "Support/object xy distance" -msgstr "Podpěry/Objekt xy vzdálenost" +msgid "Support/object XY distance" +msgstr "Podpěry/Objekt XY vzdálenost" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "XY vzdálenost mezi objektem a podpěrami" +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "Úhel vzoru" @@ -12661,7 +15263,7 @@ msgstr "Použijte toto nastavení k otočení vzoru podpěr ve vodorovné rovin msgid "On build plate only" msgstr "Pouze na podložce" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Nevytvářejte podpěry na povrchu modelu, pouze na podložce" msgid "Support critical regions only" @@ -12674,22 +15276,22 @@ msgstr "" "Vytvářejte podpěry pouze pro kritické oblasti včetně ostrého ocasu, konzoly " "atd." -msgid "Remove small overhangs" -msgstr "Odstranit malé převisy" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Odstranit malé převisy, které pravděpodobně nepotřebují podpěry." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Vzdálenost horní Z" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "Z Mezera mezi horním kontaktní vrstvou podpěr a objektem" msgid "Bottom Z distance" msgstr "Vzdálenost dolní Z" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "Z Mezera mezi spodní kontaktní vrstvou podpěr a objektem" msgid "Support/raft base" @@ -12697,7 +15299,7 @@ msgstr "Podpěry/raft základna" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filament pro tiskové podpěry základen a raftu. \"Výchozí\" znamená, že pro " "podpěry není použit žádný konkrétní filament a je použit aktuální filament" @@ -12730,7 +15332,7 @@ msgstr "Podpěry/raft kontaktní vrstva" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament k tisku kontaktních vrstev podpěr. \"Výchozí\" znamená, že pro " "kontaktní vrstvy podpěr není použit žádný konkrétní filament a je použit " @@ -12739,13 +15341,13 @@ msgstr "" msgid "Top interface layers" msgstr "Vrchní kontaktní vrstvy" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Počet nejvyšších vrstev" msgid "Bottom interface layers" msgstr "Spodní kontaktní vrstvy" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "" msgid "Same as top" @@ -12754,22 +15356,24 @@ msgstr "Stejné jako vrchní" msgid "Top interface spacing" msgstr "Horní rozestup" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Rozestup linek. Nula znamená pevné rozhraní" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "Spodní rozestup" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "Rozestup linek spodního. Nula znamená plné rozhraní" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Rychlost pro kontaktní vrstvy podpěr" msgid "Base pattern" msgstr "Základní vzor" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Čárový vzor podpěry" msgid "Rectilinear grid" @@ -12784,7 +15388,7 @@ msgstr "Vzor kontaktní vrstvy" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Vzor čáry pro kontaktní vrstvy podpěr. Výchozí vzor pro rozhraní nerozpustné " "podpěry je přímočarý, zatímco výchozí vzor pro rozhraní rozpustné podpěry je " @@ -12796,16 +15400,16 @@ msgstr "Přímočarý Prokládaný" msgid "Base pattern spacing" msgstr "Rozestup základního vzoru" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Mezery mezi podpůrnými linkami" msgid "Normal Support expansion" msgstr "Rozšíření normální podpěry" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Rozšířit (+) nebo zmenšit (-) vodorovné rozpětí normální podpěry" -msgid "Speed of support" +msgid "Speed of support." msgstr "Rychlost podpěr" msgid "" @@ -12824,9 +15428,15 @@ msgstr "" "větve a ušetří mnoho materiálu (výchozí organický), zatímco hybridní styl " "vytvoří podobnou strukturu jako běžná podpěra pod velkými plochými převisy." +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" msgstr "Přiléhavý" +msgid "Organic" +msgstr "Organické" + msgid "Tree Slim" msgstr "Strom Tenký" @@ -12836,15 +15446,12 @@ msgstr "Strom Silný" msgid "Tree Hybrid" msgstr "Strom Hybrid" -msgid "Organic" -msgstr "Organické" - msgid "Independent support layer height" msgstr "Výška nezávislé podpůrné vrstvy" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Vrstva podpěry používá nezávislou výšku vrstvy vzhledem k vrstvě objektu. " @@ -12861,12 +15468,21 @@ msgstr "" "Podpěry budou generovány pro převisy, jejichž úhel sklonu je pod hraniční " "hodnotou." +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "Úhel větve podpěr stromu" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Toto nastavení určuje maximální úhel převisů, který mohou větve podpěry " @@ -12908,22 +15524,12 @@ msgstr "" "převisům, ale podpěry se hůře odstraňují. Proto se doporučuje povolit vrchní " "kontaktní vrstvy podpěr namísto vysoké hodnoty hustoty větví." -msgid "Adaptive layer height" -msgstr "Adaptivní výška vrstvy" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Povolení této možnosti znamená, že výška stromové podpůrné vrstvy kromě " -"první bude automaticky vypočtena " - msgid "Auto brim width" msgstr "Automatická šířka límce" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Povolení této možnosti znamená, že šířka límce pro podpěry stromu budou " "automaticky vypočítány" @@ -12931,7 +15537,7 @@ msgstr "" msgid "Tree support brim width" msgstr "Šířka Límce podpěr stromů" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "Vzdálenost od větve stromu k nejvzdálenější linii Límce" msgid "Tip Diameter" @@ -12962,23 +15568,12 @@ msgstr "" "způsobí, že větve budou mít po celé délce stejnou tloušťku. Trochu větší " "úhel může zvýšit stabilitu organických podpěr." -msgid "Branch Diameter with double walls" -msgstr "Průměr větve s dvojitými stěnami" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Větve s plochou větší, než je plocha kruhu o zadaném průměru, budou kvůli " -"stabilitě tištěny s dvojitými stěnami. Nastavte tuto hodnotu na nulu, abyste " -"zakázali dvojité stěny." - msgid "Support wall loops" msgstr "" -msgid "This setting specify the count of walls around support" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." msgstr "" msgid "Tree support with infill" @@ -12986,43 +15581,75 @@ msgstr "Podpěry stromu s výplní" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Toto nastavení určuje, zda se má přidat výplň do velkých dutin podpěr stromů" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "Aktivovat řízení teploty" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Zapněte tuto volbu pro řízení teploty v komoře. Příkaz M191 bude přidán před " -"\"machine_start_gcode\"\n" -"G-kód příkazy: M141/M191 S(0-255)" msgid "Chamber temperature" msgstr "Teplota v komoře" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Vyšší teplota komory může pomoci potlačit nebo snížit odchlipování a " -"potenciálně vést k vyšší pevnosti spojů mezi vrstvami pro materiály s " -"vysokou teplotou, jako je ABS, ASA, PC, PA a další. Zároveň se však zhorší " -"filtrace vzduchu pro ABS a ASA. Naopak pro PLA, PETG, TPU, PVA a další " -"materiály s nízkou teplotou by teplota komory neměla být vysoká, aby se " -"předešlo zanášení, takže je velmi doporučeno použít hodnotu 0, která znamená " -"vypnutí" -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Teplota trysky pro vrstvy po počáteční" msgid "Detect thin wall" @@ -13030,20 +15657,20 @@ msgstr "Detekce tenkých stěn" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Detekujte tenkou stěnu, která nemůže obsahovat dvě šířky extruze. A k tisku " "použijte jednu linku. Možná se to nevytiskne moc dobře, protože to není " "uzavřená smyčka" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Tento gkód se vloží při výměně filamentu, včetně příkazu T ke spuštění " "výměny nástroje" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "Tento G-kód je vložen při změně role extruze" msgid "" @@ -13053,7 +15680,7 @@ msgstr "" "Šířka extruze pro horní plochy. Pokud je vyjádřena jako %, bude vypočtena " "vzhledem k průměru trysky." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Rychlost výplně horních ploch, která je plná" msgid "Top shell layers" @@ -13062,7 +15689,7 @@ msgstr "Vrchní vrstvy skořepiny" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Toto je počet pevných vrstev vrchní skořepiny, včetně vrchní povrchové " "vrstvy. Když je tloušťka vypočtená touto hodnotou tenčí než tloušťka vrchní " @@ -13078,8 +15705,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Počet vrchních pevných vrstev se při krájení zvýší, pokud je tloušťka " "vypočítaná horními vrstvami skořepiny tenčí než tato hodnota. Tím se lze " @@ -13087,15 +15714,36 @@ msgstr "" "toto nastavení je zakázáno a tloušťka vrchní skořepiny je absolutně určován " "vrchními vrstvami pláště" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Rychlost pohybu, která je rychlejší a bez extruze" msgid "Wipe while retracting" msgstr "Očistit při retrakci" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Při retrakci přesuňte trysku podél poslední dráhy extruze, abyste vyčistili " "uniklý materiál na trysce. To může minimalizovat skvrny při tisku nového " @@ -13105,12 +15753,11 @@ msgid "Wipe Distance" msgstr "Vzdálenost čištění" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -13124,6 +15771,12 @@ msgstr "" "Věž pro čištění se může použít k čištění zbytků na trysce a stabilizaci " "tlaku v trysce, aby se předešlo vzniku vad při tisku objektů." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Objemy čištění" @@ -13143,15 +15796,20 @@ msgstr "Základní objem" msgid "The volume of material to prime extruder on tower." msgstr "Objem materiálu k naplnění extruderu na věži." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Šířka pro čistící věž" msgid "Wipe tower rotation angle" msgstr "Úhel natočení čistící věže" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Úhel natočení čistící věže s ohledem na osu X." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Úhel vrcholu stabilizačního kužele" @@ -13162,12 +15820,6 @@ msgstr "" "Úhel na vrcholu kužele, který se používá ke stabilizaci čistící věže. Větší " "úhel znamená širší základnu." -msgid "Wipe tower purge lines spacing" -msgstr "Rozteč čistících linek v čistící věži" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Rozteč čistících linek v čistící věži." - msgid "Maximum wipe tower print speed" msgstr "" @@ -13185,7 +15837,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13193,8 +15845,38 @@ msgid "" "regardless of this setting." msgstr "" -msgid "Wipe tower extruder" -msgstr "Extruder čistící věže" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -13216,6 +15898,18 @@ msgstr "" "na čistící věži. Tyto hodnoty jsou použity pro zjednodušení vytvoření " "celkových objemů čištění níže." +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -13238,8 +15932,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Tento objekt bude použit k očištění trysky po výměně filamentu, aby se " "ušetřil filament a zkrátila se doba tisku. V důsledku toho budou barvy " @@ -13251,13 +15945,42 @@ msgstr "Maximální vzdálenost přemostění" msgid "Maximal distance between supports on sparse infill sections." msgstr "Maximální vzdálenost mezi podpěrami u částí s řídkou výplní." +msgid "Wipe tower purge lines spacing" +msgstr "Rozteč čistících linek v čistící věži" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Rozteč čistících linek v čistící věži." + +msgid "Extra flow for purging" +msgstr "Navýšení průtoku pro čištění" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Dodatečný průtok používaný pro tisk čistících linek na čistící věži. Díky " +"tomu jsou čistící linky silnější nebo užší, než by normálně byly. Vzdálenost " +"mezi nimi se upravuje automaticky." + +msgid "Idle temperature" +msgstr "Teplota při nečinnosti" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" + msgid "X-Y hole compensation" msgstr "X-Y Kompenzace otvoru" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Díry objektu se zvětší nebo zmenší v rovině XY o nakonfigurovanou hodnotu. " "Kladná hodnota zvětší díry. Záporná hodnota díry zmenšuje. Tato funkce se " @@ -13266,11 +15989,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "X-Y Kompenzace obrysu" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Kontura objektu se zvětší nebo zmenší v rovině XY o nakonfigurovanou " "hodnotu. Kladná hodnota zvětší obrys. Záporná hodnota zmenší obrys. Tato " @@ -13298,7 +16022,7 @@ msgstr "Míra detekce polyotvoru" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13329,7 +16053,7 @@ msgstr "Formát náhledových obrázků G-kódu" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Formát náhledových obrázků G-kódu: Pro nejlepší kvalitu PNG, pro nejmenší " "velikost JPG, pro firmware s malou pamětí QOI" @@ -13338,24 +16062,21 @@ msgid "Use relative E distances" msgstr "Použít relativní E vzdálenosti" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Klasický generátor stěn produkuje stěny s konstantní extruzní šířkou a pro " "velmi tenké oblasti se používá gap-fill. Arachne engine produkuje stěny s " "proměnnou extruzní šířkou." -msgid "Classic" -msgstr "Klasický" - msgid "Arachne" msgstr "Arachne" @@ -13365,7 +16086,7 @@ msgstr "Délka přechodu stěny" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Při přechodu mezi různými počty stěn, jak se díl ztenčuje, je vyhrazeno " "určité množství prostoru pro rozdělení nebo spojení segmentů stěny. " @@ -13381,7 +16102,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Zabránit přechodu mezi jednou dodatečnou stěnou a jednou méně. Tato mez " "rozšiřuje rozsah šířek extruze na [Minimální šířka stěny - mezera, 2 * " @@ -13398,7 +16119,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Kdy vytvořit přechody mezi sudým a lichým počtem stěn. Klínový tvar s úhlem " "větším, než je toto nastavení, nebude mít přechody a do středu se " @@ -13411,7 +16132,7 @@ msgstr "Počet ovlivněných stěn" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Počet stěn, počítáno od středu, přes které je třeba rozložit variaci. Nižší " "hodnoty znamenají, že vnější stěny se nemění na šířku" @@ -13421,14 +16142,10 @@ msgstr "Minimální velikost prvku" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minimální tloušťka tenkých prvků. Prvky modelu, které jsou tenčí než tato " -"hodnota, nebudou vytištěny, zatímco prvky tlustší než minimální velikost " -"prvku budou rozšířeny na minimální šířku stěny. Vyjadřuje se jako procento " -"průměru trysky" msgid "Minimum wall length" msgstr "" @@ -13438,9 +16155,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" @@ -13463,7 +16180,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Šířka stěny, která nahradí tenké prvky (podle Minimální velikosti prvku) " "modelu. Pokud je minimální šířka stěny tenčí než tloušťka prvku, zeď bude " @@ -13474,9 +16191,9 @@ msgid "Detect narrow internal solid infill" msgstr "Detekovat úzkou vnitřní plnou výplň" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. Je-" "li povolena, bude pro oblast použit soustředný vzor, aby se urychlil tisk. V " @@ -13494,28 +16211,149 @@ msgstr "příliš velká šířka extruze " msgid " not in range " msgstr " není v dosahu " +msgid "Export 3MF" +msgstr "Exportovat 3MF" + +msgid "Export project as 3MF." +msgstr "Exportovat projekt jako 3MF." + +msgid "Export slicing data" +msgstr "Exportovat data Slicování" + +msgid "Export slicing data to a folder." +msgstr "Exportovat data Slicování do složky." + +msgid "Load slicing data" +msgstr "Načíst data Slicování" + +msgid "Load cached slicing data from directory." +msgstr "Načíst data dělení z mezipaměti z adresáře" + +msgid "Export STL" +msgstr "Exportovat STL" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "Slicovat" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Slicovat podložky: 0-všechny podložky, i- podložku i, ostatní-neplatné" + +msgid "Show command help." +msgstr "Zobrazit nápovědu k příkazu." + +msgid "UpToDate" +msgstr "Aktualizováno" + +msgid "Update the config values of 3MF to latest." +msgstr "Aktualizujte konfigurační hodnoty 3MF na nejnovější." + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "Načíst výchozí filamenty" + +msgid "Load first filament as default for those not loaded." +msgstr "Načíst první filament jako výchozí pro ty, které nebyly načteny" + msgid "Minimum save" msgstr "Uložit minimum" -msgid "export 3mf with minimum size." -msgstr "exportovat 3mf s minimální velikostí." +msgid "Export 3MF with minimum size." +msgstr "exportovat 3MF s minimální velikostí." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "max počet trojúhelníků na podložku pro slicování." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "max čas slicování na podložku v sekundách." msgid "No check" msgstr "Žádná kontrola" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" -"Neprovádět žádné kontrolní testy, například kontrolu konfliktů cesty g-kódu." +"Neprovádět žádné kontrolní testy, například kontrolu konfliktů cesty G-kódu." + +msgid "Normative check" +msgstr "Normativní kontrola" + +msgid "Check the normative items." +msgstr "Kontrola normativních prvků." + +msgid "Output Model Info" +msgstr "Info o výstupním modelu" + +msgid "Output the model's information." +msgstr "Vytisknout informace o modelu." + +msgid "Export Settings" +msgstr "Nastavení exportu" + +msgid "Export settings to a file." +msgstr "Exportovat nastavení do souboru." + +msgid "Send progress to pipe" +msgstr "Poslat průběh do roury" + +msgid "Send progress to pipe." +msgstr "Poslat průběh do roury." + +msgid "Arrange Options" +msgstr "Volby uspořádání" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Volby uspořádání: 0-zakázat, 1-povolit, ostatní-automaticky" + +msgid "Repetition count" +msgstr "Počet opakování" + +msgid "Repetition count of the whole model." +msgstr "Počet opakování celého modelu" msgid "Ensure on bed" msgstr "Zajistit na podložce" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Zvedněte objekt nad podložku, když je částečně pod ní. Výchozí stav je " "vypnutý" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Uspořádejte modely na tiskovou podložku a slučte je do jednoho modelu, " +"abyste s nimi mohli provádět akce jednou." + +msgid "Convert Unit" +msgstr "Převést jednotku" + +msgid "Convert the units of model." +msgstr "Převést jednotky modelu" + msgid "Orient Options" msgstr "Orientační možnosti" @@ -13525,12 +16363,82 @@ msgstr "Orientační možnosti: 0-vypnuto, 1-zapnuto, ostatní-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Úhel rotace kolem osy Z v stupních." +msgid "Rotate around X" +msgstr "Rotace kolem osy X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Úhel rotace kolem osy X v stupních." + msgid "Rotate around Y" msgstr "Rotace kolem osy Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Úhel rotace kolem osy Y v stupních." +msgid "Scale the model by a float factor." +msgstr "Měřítko modelu pomocí plovoucího faktoru" + +msgid "Load General Settings" +msgstr "Načíst obecná nastavení" + +msgid "Load process/machine settings from the specified file." +msgstr "Načíst nastavení procesu/stroje ze zadaného souboru" + +msgid "Load Filament Settings" +msgstr "Načíst nastavení filamentu" + +msgid "Load filament settings from the specified file list." +msgstr "Načíst nastavení filamentu ze zadaného seznamu souborů" + +msgid "Skip Objects" +msgstr "Přeskočit objekty" + +msgid "Skip some objects in this print." +msgstr "Přeskočit některé objekty při tisku" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Načítat aktuální nastavení procesu/stroje ze zadaného souboru při použití " +"aktuálního" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "Složka Data" @@ -13542,22 +16450,106 @@ msgstr "" "Načtěte a uložte nastavení z/do daného adresáře. To je užitečné pro " "udržování různých profilů nebo konfigurací ze síťového úložiště." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Výstupní adresář" + +msgid "Output directory for the exported files." +msgstr "Výstupní adresář pro exportované soubory." + +msgid "Debug level" +msgstr "Úroveň ladění" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, 4:" +"debug, 5:sledovat\n" + +msgid "Enable timelapse for print" +msgstr "" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" + +msgid "Load custom G-code" msgstr "Načíst vlastní G-kód" -msgid "Load custom gcode from json" +msgid "Load custom G-code from json." msgstr "Načíst vlastní G-kód z JSON" -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" msgstr "Aktuální z-hop" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Obsahuje z-hop na začátku vlastního bloku G-code." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Poloha extruderu na začátku vlastního bloku G-code. Pokud vlastní G-code " "vytváří pohyb, měl by pohyb zapsat do této proměnné, aby PrusaSlicer věděl, " @@ -13566,18 +16558,28 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Stav retrakce na začátku vlastního G-code. Pokud vlastní G-code pohybuje " "osou extruderu, měl by do této proměnné zapisovat, aby PrusaSlicer správně " "zrušil deretrakce, když mu bude znovu předáno řízení." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Extra deretrakce" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "Současně naplánované extra čištění extruderu po deretrakci." +msgid "Absolute E position" +msgstr "Absolutní poloha E" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Aktuální poloha osy extruderu. Používá se pouze při absolutním adresování " +"extruderu." + msgid "Current extruder" msgstr "Aktuální extruder" @@ -13623,8 +16625,15 @@ msgstr "" msgid "Is extruder used?" msgstr "Je extruder použitý?" -msgid "Vector of bools stating whether a given extruder is used in the print." -msgstr "" +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "Vektor booleanů udávající, zda je při tisku použit daný extruder." + +msgid "Has single extruder MM priming" +msgstr "Má jeden extruder MM čištění" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "Jsou v tomto tisku použity dodatečné vícemateriálové čistící oblasti?" msgid "Volume per extruder" msgstr "Objem pro každý extruder" @@ -13633,10 +16642,10 @@ msgid "Total filament volume extruded per extruder during the entire print." msgstr "" "Celkový objem filamentu vytlačeného daným extruderem během celého tisku." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Počet výměn nástrojů během tisku." msgid "Total volume" @@ -13686,7 +16695,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -13695,12 +16704,14 @@ msgstr "Název vstupního souboru bez přípony" msgid "Source filename of the first object, without extension." msgstr "Název zdrojového souboru prvního objektu bez přípony." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "Vektor má dva prvky: souřadnice x a y bodu. Hodnoty v mm." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "Vektor má dva prvky: rozměr x a y ohraničujícího rámečku. Hodnoty v mm." @@ -13746,6 +16757,9 @@ msgstr "Hodina" msgid "Minute" msgstr "Minuta" +msgid "Second" +msgstr "Sekund" + msgid "Print preset name" msgstr "Název přednastavení tisku" @@ -13774,13 +16788,22 @@ msgstr "Fyzický název tiskárny" msgid "Name of the physical printer used for slicing." msgstr "Název fyzické tiskárny použité pro slicování." +msgid "Number of extruders" +msgstr "Počet extruderů" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Celkový počet extruderů bez ohledu na to, zda jsou použity v aktuálním tisku." + msgid "Layer number" msgstr "Číslo vrstvy" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -13789,7 +16812,7 @@ msgid "" msgstr "" "Výška aktuální vrstvy nad tiskovou podložkou, měřeno k hornímu okraji vrstvy." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -13816,9 +16839,6 @@ msgstr "Generování výplně dráhy nástroje" msgid "Detect overhangs for auto-lift" msgstr "Detekovat převisy pro automatické zvedání" -msgid "Generating support" -msgstr "Generování podpěr" - msgid "Checking support necessity" msgstr "Zkontroluji nutnost podpěr" @@ -13839,6 +16859,9 @@ msgstr "" "Zdá se, že objekt %s má %s. Změňte orientaci objektu nebo povolte generování " "podpěr." +msgid "Generating support" +msgstr "Generování podpěr" + msgid "Optimizing toolpath" msgstr "Optimalizace dráhy nástroje" @@ -13855,42 +16878,32 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Kompenzace velikosti XY objektu nebude použita, protože je také barevně " "natřený.\n" "Korekci velikosti XY nelze kombinovat s barevnou malbou." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Generování dráhy nástroje ve vrstvě %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Podpěry: detekovat převisy" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Podpěry: generování kontaktních bodů" -msgid "Support: propagate branches" -msgstr "Podpěry: propagovat větve" +msgid "Loading of a model file failed." +msgstr "Nahrávání souboru modelu selhalo." -msgid "Support: draw polygons" -msgstr "Podpěry: kreslení polygonů" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Podpěry: generování dráhy nástroje" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Podpěry: generování polygonů na vrstvě %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Podpěry: oprava děr ve vrstvě %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Podpěry: šíření větví na vrstvě %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -13898,19 +16911,10 @@ msgstr "" "Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." "amf(.xml)" -msgid "Loading of a model file failed." -msgstr "Nahrávání souboru modelu selhalo." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Nahraný soubor nemohl být načten, protože je prázdný" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Neznámý formát souboru. Vstupní soubor musí mít příponu .3mf nebo .zip.amf." -msgid "Canceled" -msgstr "Zrušeno" - msgid "load_obj: failed to parse" msgstr "load_obj: nepodařilo se zpracovat" @@ -14000,7 +17004,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Prosím, zadejte platné hodnoty:\n" "Počáteční hodnota: >= %.1f\n" @@ -14012,7 +17016,7 @@ msgid "The name cannot be empty." msgstr "Název nemůže být prázdný." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "" msgid "The name cannot be the same as the system preset name." @@ -14024,6 +17028,14 @@ msgstr "Název je stejný jako název jiné existující předvolby" msgid "create new preset failed." msgstr "Vytvoření nové předvolby selhalo." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -14046,18 +17058,15 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -msgid "Connecting to printer..." -msgstr "Připojování k tiskárně..." - -msgid "The failed test result has been dropped." -msgstr "Výsledek neúspěšného testu byl zahozen." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Výsledek kalibrace dynamiky průtoku byl uložen do tiskárny" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -14066,22 +17075,38 @@ msgid "" "to override the historical result?" msgstr "" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" +msgid "Connecting to printer..." +msgstr "Připojování k tiskárně..." + +msgid "The failed test result has been dropped." +msgstr "Výsledek neúspěšného testu byl zahozen." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Výsledek kalibrace dynamiky průtoku byl uložen do tiskárny" + msgid "Internal Error" msgstr "Interní chyba" msgid "Please select at least one filament for calibration" msgstr "Vyberte prosím alespoň jeden filament pro kalibraci" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "Výsledek kalibrace průtoku byl uložen do předvolby" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "Výsledek kalibrace maximální objemové rychlosti byl uložen do předvolby" @@ -14094,17 +17119,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Nyní jsme přidali automatickou kalibraci pro různé filamenty, která je plně " -"automatizovaná a výsledek bude uložen do tiskárny pro budoucí použití. " -"Kalibraci musíte provést pouze v následujících omezených případech:\n" -"1. Pokud použijete nový filament jiné značky/modelu nebo je filament vlhký;\n" -"2. Pokud je tryska opotřebená nebo nahrazena novou;\n" -"3. Pokud je maximální objemová rychlost nebo tisková teplota změněna v " -"nastavení filamentu." msgid "About this calibration" msgstr "O této kalibraci" @@ -14136,12 +17154,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Použitím kalibrace průtoku dynamiky se mohou stále objevit některé problémy " "s extruzí, jako například:\n" @@ -14245,20 +17263,12 @@ msgstr "" "*Doporučujeme přidat do názvu také značku, materiál, typ a dokonce i úroveň " "vlhkosti" -msgid "Failed" -msgstr "Selhalo" - msgid "Please enter the name you want to save to printer." msgstr "Zadejte název, který chcete uložit do tiskárny." msgid "The name cannot exceed 40 characters." msgstr "Název nemůže překročit 40 znaků." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" - msgid "Please find the best line on your plate" msgstr "Najděte nejlepší linku na své podložce" @@ -14271,9 +17281,6 @@ msgstr "Vstupní hodnota" msgid "Save to Filament Preset" msgstr "Uložit do předvolby Filamentu" -msgid "Preset" -msgstr "Předvolba" - msgid "Record Factor" msgstr "Záznamový faktor" @@ -14308,9 +17315,6 @@ msgstr "Přeskočit kalibraci 2" msgid "flow ratio : %s " msgstr "poměr průtoku: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Vyberte blok s nejhladším horním povrchem" - msgid "Please choose a block with smoothest top surface." msgstr "Vyberte blok s nejhladším horním povrchem." @@ -14339,22 +17343,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Parametry tisku" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Typ Podložky" msgid "filament position" msgstr "pozice filamentu" -msgid "External Spool" -msgstr "Externí cívka" - msgid "Filament For Calibration" msgstr "Filament pro kalibraci" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Tipy na kalibrační materiál: \n" "- Materiály, které mohou sdílet stejnou teplotu podložky\n" @@ -14374,9 +17393,23 @@ msgstr "%s není kompatibilní s %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU není podporováno pro automatickou kalibraci dynamiky průtoku." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Připojování k tiskárně" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Od hodnoty k" @@ -14395,6 +17428,9 @@ msgstr "Z objemové rychlosti" msgid "To Volumetric Speed" msgstr "Do objemové rychlosti" +msgid "Are you sure you want to cancel this print?" +msgstr "Opravdu chcete zrušit tento tisk?" + msgid "Flow Dynamics Calibration Result" msgstr "Výsledek kalibrace dynamiky průtoku" @@ -14420,6 +17456,13 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Upravit kalibraci dynamiky průtoku" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "" @@ -14429,6 +17472,12 @@ msgstr "" msgid "The filament must be selected." msgstr "" +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Vyhledávání v síti" @@ -14464,15 +17513,12 @@ msgstr "" msgid "PA Calibration" msgstr "PA Kalibrace" -msgid "DDE" -msgstr "DDE" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Typ Extruderu" +msgid "DDE" +msgstr "DDE" + msgid "PA Tower" msgstr "PA Věž" @@ -14491,14 +17537,32 @@ msgstr "Konec PA: " msgid "PA step: " msgstr "PA Krok: " +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" + msgid "Print numbers" msgstr "Tisk čísel" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Zadejte prosím platné hodnoty:\n" "Spustit PA: >= 0,0\n" @@ -14508,6 +17572,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Kalibrace teploty" +msgid "Filament type" +msgstr "Typ Filamentu" + msgid "PLA" msgstr "PLA" @@ -14529,9 +17596,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Typ Filamentu" - msgid "Start temp: " msgstr "Počáteční teplota: " @@ -14541,16 +17605,15 @@ msgstr "Konec konce: " msgid "Temp step: " msgstr "Teplotní krok: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Prosím zadejte platné hodnoty:\n" -"Startovní teplota: <= 350\n" -"Koncová teplota: >= 170\n" -"Startovní teplota > Koncová teplota + 5)" msgid "Max volumetric speed test" msgstr "Test maximální objemové rychlosti" @@ -14561,17 +17624,17 @@ msgstr "Spustit objemovou rychlost: " msgid "End volumetric speed: " msgstr "Konec objemové rychlosti: " -msgid "step: " -msgstr "krok: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Zadejte prosím platné hodnoty:\n" -"start > 0 \n" +"start > 0\n" "krok >= 0\n" "konec > začátek + krok)" @@ -14584,14 +17647,17 @@ msgstr "Počáteční rychlost: " msgid "End speed: " msgstr "Koncová rychlost: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Zadejte prosím platné hodnoty:\n" -"start > 10 \n" +"start > 10\n" "krok >= 0\n" "konec > začátek + krok)" @@ -14601,10 +17667,131 @@ msgstr "Délka retrakce na začátku: " msgid "End retraction length: " msgstr "Délka retrakce na konci: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Odeslat G-Kód do tiskového serveru" msgid "Upload to Printer Host with the following filename:" @@ -14651,18 +17838,35 @@ msgstr "Zrušit vybrané" msgid "Show error message" msgstr "Zobrazit chybové hlášení" -msgid "Enqueued" +msgid "Queued" msgstr "Ve frontě" msgid "Uploading" msgstr "Nahrávání" -msgid "Cancelling" +msgid "Canceling" msgstr "Ruší se" msgid "Error uploading to print host" msgstr "Chyba při nahrávání do tiskového serveru" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + msgid "Unable to perform boolean operation on selected parts" msgstr "Nelze provést booleovskou operaci na vybraných částech" @@ -14723,13 +17927,13 @@ msgstr "" msgid "DNS Server:" msgstr "" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "" msgid "Test bing.com:" @@ -14793,13 +17997,13 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "" -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "" msgid "" @@ -14810,7 +18014,7 @@ msgstr "" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "" msgid "" @@ -14819,7 +18023,7 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" @@ -14834,8 +18038,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" @@ -14859,21 +18063,27 @@ msgstr "" msgid "Create Type" msgstr "" -msgid "The model is not found, place reselect vendor." -msgstr "" - -msgid "Select Model" +msgid "The model was not found, please reselect vendor." msgstr "" msgid "Select Printer" msgstr "" +msgid "Select Model" +msgstr "" + msgid "Input Custom Model" msgstr "" msgid "Can't find my printer model" msgstr "" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "" @@ -14883,15 +18093,9 @@ msgstr "" msgid "Hot Bed STL" msgstr "" -msgid "Load stl" -msgstr "" - msgid "Hot Bed SVG" msgstr "" -msgid "Load svg" -msgstr "" - msgid "Max Print Height" msgstr "" @@ -14902,16 +18106,16 @@ msgstr "" msgid "Exception in obtaining file size, please import again." msgstr "" -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" msgid "The printer model was not found, please reselect." msgstr "" -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "" -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "" msgid "Printer Preset" @@ -14926,9 +18130,6 @@ msgstr "" msgid "Process Preset Template" msgstr "" -msgid "Back Page 1" -msgstr "" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -14939,9 +18140,6 @@ msgid "" "page. Please check before creating it." msgstr "" -msgid "The custom printer or model is not inputed, place input." -msgstr "" - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -14964,14 +18162,14 @@ msgstr "" msgid "Create process presets failed. As follows:\n" msgstr "" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "" msgid "Current vendor has no models, please reselect." msgstr "" msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" @@ -14991,10 +18189,18 @@ msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "" -msgid "Create Filament Successful" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "" + +msgid "Filament Created Successfully" msgstr "" msgid "Printer Created" @@ -15018,7 +18224,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" @@ -15066,13 +18272,20 @@ msgid "" "creation." msgstr "" +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" @@ -15121,7 +18334,7 @@ msgid "" "be deleted after exiting the dialog." msgstr "" -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "" msgid "The following presets inherits this preset." @@ -15133,6 +18346,12 @@ msgstr[2] "" msgid "Delete Preset" msgstr "" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" + msgid "Are you sure to delete the selected preset?" msgstr "" @@ -15142,11 +18361,8 @@ msgstr "Smazat přednastavení" msgid "+ Add Preset" msgstr "" -msgid "Delete Filament" -msgstr "" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" @@ -15182,16 +18398,33 @@ msgid "Daily Tips" msgstr "" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" msgid "Need select printer" @@ -15200,6 +18433,35 @@ msgstr "Je nutné vybrat tiskárnu" msgid "The start, end or step is not valid value." msgstr "Počáteční, koncová nebo kroková hodnota není platná." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15222,9 +18484,6 @@ msgstr "Úspěch!" msgid "Are you sure to log out?" msgstr "" -msgid "Refresh Printers" -msgstr "Obnovit tiskárny" - msgid "View print host webui in Device tab" msgstr "" @@ -15271,22 +18530,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Nesprávný typ tiskového serveru: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "Připojení k AstroBoxu funguje správně." msgid "Could not connect to AstroBox" msgstr "Nelze se připojit k AstroBoxu" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Poznámka: Je vyžadována verze AstroBoxu nejméně 1.1.0." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Připojení k Duet funguje správně." msgid "Could not connect to Duet" msgstr "Nelze se připojit k Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Došlo k neznámé chybě" msgid "Wrong password" @@ -15298,7 +18557,7 @@ msgstr "Nelze získat prostředky pro vytvoření nového spojení" msgid "Upload not enabled on FlashAir card." msgstr "Na kartě FlashAir není nahrávání povoleno." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "Připojení k FlashAir funguje správně a nahrávání je povoleno." msgid "Could not connect to FlashAir" @@ -15311,28 +18570,28 @@ msgstr "" "Poznámka: Vyžaduje se FlashAir s firmwarem 2.00.02 nebo novějším a " "aktivovanou funkcí nahrávání." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "Připojení k MKS funguje správně." msgid "Could not connect to MKS" msgstr "Nelze se připojit k MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "Připojení k OctoPrint pracuje správně." msgid "Could not connect to OctoPrint" msgstr "Nelze se spojit s OctoPrintem" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Poznámka: Je vyžadován OctoPrint ve verzi alespoň 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Připojení k tiskárně Prusa SL1 /SL1S funguje správně." msgid "Could not connect to Prusa SLA" msgstr "Nelze se připojit k Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "Připojení k PrusaLinku funguje správně." msgid "Could not connect to PrusaLink" @@ -15357,19 +18616,19 @@ msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" "Nahrání se nezdařilo. Na adrese %1% nebylo nalezeno žádné vhodné úložiště." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Připojení k Prusa Connectu funguje správně." msgid "Could not connect to Prusa Connect" msgstr "Nelze se připojit k Prusa Connectu" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Připojení k Repetieru funguje správně." msgid "Could not connect to Repetier" msgstr "Nelze se připojit k Repetieru" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Poznámka: Je vyžadována verze Repetier alespoň 0.90.0." #, boost-format @@ -15401,172 +18660,476 @@ msgstr "" "Chyba: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Žádné AMS" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "Vyrovnání podložky" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "Zaneprázdněn" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "Stav úlohy" + +msgid "Sent Time" +msgstr "Čas odeslání" + +msgid "There are no tasks to be sent!" +msgstr "Nejsou žádné úlohy k odeslání!" + +msgid "No historical tasks!" +msgstr "Žádné historické úlohy!" + +msgid "Upgrading" +msgstr "Aktualizace" + +msgid "syncing" +msgstr "synchronizace" + +msgid "Printing Finish" +msgstr "Tisk dokončen" + +msgid "Printing Failed" +msgstr "Tisk selhal" + +msgid "Printing Pause" +msgstr "Tisk pozastaven" + +msgid "Pending" +msgstr "Čeká" + +msgid "Sending" +msgstr "Odesílání" + +msgid "Sending Finish" +msgstr "Odesílání dokončeno" + +msgid "Sending Cancel" +msgstr "Odesílání zrušeno" + +msgid "Sending Failed" +msgstr "Odeslání selhalo" + +msgid "Print Success" +msgstr "Tisk úspěšný" + +msgid "Print Failed" +msgstr "Tisk neúspěšný" + +msgid "Removed" +msgstr "Odstraněno" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" msgid "Connected to Obico successfully!" @@ -15590,10 +19153,10 @@ msgstr "" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." @@ -15605,7 +19168,110 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" -msgid "User cancelled." +msgid "User canceled." +msgstr "" + +msgid "Head diameter" +msgstr "Průměr hrotu" + +msgid "Max angle" +msgstr "" + +msgid "Detection radius" +msgstr "" + +msgid "Remove selected points" +msgstr "Odebrat označené body" + +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "Automatické generování bodů" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " neplatný uši Límce" + +msgid "Brim Ears" +msgstr "Uši Límce" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15665,7 +19331,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" #: resources/data/hints.ini: [hint:Reverse on odd] @@ -15691,6 +19357,9 @@ msgid "" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " "problems on the Windows system?" msgstr "" +"Oprava modelu\n" +"Věděli jste, že můžete opravit poškozený 3D model abyste se vyvarovali " +"spoustě problémů se slicování na systému Windows?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -15703,7 +19372,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatické uspořádání\n" "Věděli jste, že můžete automaticky uspořádat všechny objekty ve vašem " @@ -15713,7 +19382,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Automatická Orientace\n" "Věděli jste, že můžete pomocí jednoho kliknutí otočit objekty do optimálního " @@ -15747,6 +19416,9 @@ msgid "" "Did you know that you use the Search tool to quickly find a specific Orca " "Slicer setting?" msgstr "" +"Funkce hledání\n" +"Věděli jste, že můžete použít nástroj hledání pro rychlé nalezení " +"specifického nastavení Snapmaker Orca?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -15754,6 +19426,10 @@ msgid "" "Did you know that you can reduce the number of triangles in a mesh using the " "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" +"Zjednodušení modelu\n" +"Věděli jste, že můžete zmenšit počet trojúhelníků mřížky použitím funkce " +"zjednodušení mřížky? Kliknětě pravým tlačítkem na model a vyberte " +"zjednodušit model." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" @@ -15883,7 +19559,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Límec pro lepší přilnavost\n" @@ -15894,7 +19570,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Nastavte parametry pro více objektů\n" "Věděli jste, že můžete najednou nastavit parametry pro všechny vybrané " @@ -15911,8 +19587,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Čištit do podpěr/objektů/výplně\n" "Věděli jste, že můžete ušetřit zahozené filamenty tím, že je očistíte do " @@ -15928,23 +19604,1033 @@ msgstr "" "Věděli jste, že můžete použít více opakování stěn a vyšší hustotu řídké " "výplně pro zvýšení pevnosti modelu?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" +"Kdy potřebujete tisknout s otevřenými dvířky tiskárny\n" +"Otevření dvířek tiskárny může snížit pravděpodobnost ucpaní extruderu/" +"hotendu při tisku filamentu s nižší teplotou a vyšší teplotě uzavřeného " +"prostoru. Další informace naleznete ve Wiki." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptivní výška vrstvy" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Povolení této možnosti znamená, že výška stromové podpůrné vrstvy kromě " +#~ "první bude automaticky vypočtena " + +#~ msgid "AMS not connected" +#~ msgstr "AMS není připojen" + +#~ msgid "Ext Spool" +#~ msgstr "Ext Cívka" + +#~ msgid "Guide" +#~ msgstr "Průvodce" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Kalibruji AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "Během kalibrace došlo k problému. Kliknutím zobrazíte řešení." + +#~ msgid "Calibrate again" +#~ msgstr "Znovu kalibrovat" + +#~ msgid "Cancel calibration" +#~ msgstr "Zrušit kalibraci" + +#~ msgid "Feed Filament" +#~ msgstr "Zavádění filamentu" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Před tiskem přes LAN je třeba vložit SD kartu." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Před odesláním do tiskárny je třeba vložit SD kartu." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "Poznámka: Lze vybrat pouze sloty AMS se stejným typem materiálu." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Pokud v AMS existují dva identické filamenty, bude povolena záloha AMS " +#~ "filamentu.\n" +#~ "(Aktuálně podporuje automatické doplňování spotřebního materiálu stejné " +#~ "značky, typu materiálu a barvy)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS odhadne zbývající kapacitu filamentu Bambu po filamentu informace " +#~ "jsou aktualizovány. Během tisku bude aktualizována zbývající kapacita " +#~ "automaticky." + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Spirálový režim funguje pouze tehdy, když je 1 smyčka na stěně, podpěry " +#~ "jsou deaktivovány, horní skořepina vrstvy jsou 0, hustota vnitřní výplně " +#~ "je 0 a typ časosběru je tradiční." + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pozastaveno kvůli docházejícího filamentu" + +#~ msgid "Heating hotend" +#~ msgstr "Vytápění hotend" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Kalibrace extruze" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Tisk byl pozastaven uživatelem" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pozastavení při pádu předního krytu" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Kalibrace extruze průtoku" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pozastaveno kvůli poruše teploty trysky" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pozastaveno kvůli poruše teploty topné podložky" + +#~ msgid "Skip step pause" +#~ msgstr "Přeskočit krok pauza" + +#~ msgid "Motor noise calibration" +#~ msgstr "Kalibrace zvuku motoru" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pozastaveno kvůli ztrátě AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Pozastaveno kvůli nízké rychlosti ventilátoru heat break" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pozastaveno kvůli chybě v řízení teploty komory" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pozastaveno uživatelem vloženým G-kódem" + +#~ msgid "Fatal" +#~ msgstr "Fatální" + +#~ msgid "Serious" +#~ msgstr "Vážně" + +#~ msgid "Common" +#~ msgstr "Běžný" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Aktuální teplota komory nebo cílová teplota komory přesahuje 45℃. Aby se " +#~ "předešlo ucpaní extruderu, není povoleno načítání nízkoteplotního " +#~ "filamentu (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Do extruderu je načten nízkoteplotní filament (PLA/PETG/TPU). Aby se " +#~ "předešlo ucpaní extruderu, není povoleno nastavovat teplotu komory nad " +#~ "45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "AMS nepodporuje Bambu PET-CF/PA6-CF." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Objekt je položen přes hranici podložky nebo překračuje limit výšky.\n" +#~ "Prosím, vyřešte problém tím, že jej úplně přesunete na podložku nebo mimo " +#~ "ní a potvrďte, že výška je v rámci objemu stavby." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Najdete jej v \" Nastavení > Síť > Přístupový kód \" \n" +#~ "na tiskárně, jak je znázorněno na obrázku:" + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Úložiště není k dispozici, vložte SD kartu." + +#~ msgid "Cham" +#~ msgstr "Komora" + +#~ msgid "Still unload" +#~ msgstr "Stále vysunovat" + +#~ msgid "Still load" +#~ msgstr "Stále zavádět" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Nelze to spustit bez SD karty." + +#~ msgid "Update" +#~ msgstr "Aktualizovat" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Citlivost pauzy je" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Žádné filamenty AMS. Chcete-li načíst informace AMS, vyberte tiskárnu na " +#~ "stránce Zařízení." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Synchronizace filamentů s AMS zruší všechny aktuálně vybrané předvolby " +#~ "filamentů a barvy. Chcete pokračovat?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Synchronizace již proběhla, chcete synchronizovat pouze změny nebo znovu " +#~ "synchronizovat Všechno?" + +#~ msgid "Sync" +#~ msgstr "Synchronizovat" + +#~ msgid "Resync" +#~ msgstr "Znovu synchronizovat" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Existují některé neznámé filamenty na mapovaná na generickou předvolbu. " +#~ "Aktualizujte prosím Snapmaker Orca nebo restartujte Snapmaker Orca a " +#~ "zkontrolujte, zda existuje aktualizace systému předvolby." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Jste si jisti, že chcete do souboru 3MF uložit původní SVG s lokální " +#~ "cestou k souboru?\n" +#~ "Pokud stisknete \"NE\", všechny SVG v projektu již nebude možné upravovat." + +#~ msgid "Private protection" +#~ msgstr "Ochrana soukromí" + +#~ msgid "General Settings" +#~ msgstr "Obecná nastavení" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Zobrazovat \"Tip dne\" po spuštění" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Pokud je povoleno, při spuštění se zobrazí užitečné rady." + +#~ msgid "Network" +#~ msgstr "Síť" + +#~ msgid "User Sync" +#~ msgstr "Synchronizace uživatelů" + +#~ msgid "System Sync" +#~ msgstr "Synchronizace systému" + +#~ msgid "every" +#~ msgstr "každých" + +#~ msgid "Downloads" +#~ msgstr "Stahování" + +#~ msgid "Dark Mode" +#~ msgstr "Tmavý režim" + +#~ msgid "Home page and daily tips" +#~ msgstr "Domovská stránka a denní tipy" + +#~ msgid "Show home page on startup" +#~ msgstr "Zobrazit domovskou stránku při spuštění" + +#~ msgid "Please choose the filament color" +#~ msgstr "Vyberte prosím barvu vlákna" + +#~ msgid "Send print job to" +#~ msgstr "Odeslat tiskovou úlohu na" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s překračuje počet AMS slotů. Aktualizujte prosím tiskárnu " +#~ "firmware pro podporu přiřazení slotu AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament překračuje počet slotů AMS. Aktualizujte prosím firmware " +#~ "tiskárny pro podporu přiřazení slotů AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Mapování filamentů na sloty AMS byla vytvořena. Můžete kliknout na " +#~ "Filament nahoře pro změnu jeho mapovacího slotu AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Kliknutím na každý filament výše určete jeho mapovací slot AMS před " +#~ "odeslání tiskové úlohy" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Firmware tiskárny podporuje pouze sekvenční mapování filamentu => AMS " +#~ "slot." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Před tiskem je třeba vložit SD kartu." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Pro záznam časosběru je třeba vložit SD kartu." + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "Připojování k tiskárně. Nelze zrušit během procesu připojování." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Pozor při použití! Kalibrace průtoku na Texturované PEI podložce může " +#~ "selhat kvůli rozptýlenému povrchu." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Automatická kalibrace průtoku pomocí Mikro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Odeslat do tiskárny SD kartu" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Před odesláním na SD kartu do tiskárny je třeba vložit SD kartu." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Tiskárna nepodporuje odesílání na SD kartu tiskárny." + +#~ msgid "Auto-Calc" +#~ msgstr "Automatický výpočet" + +#~ msgid "unloaded" +#~ msgstr "vyjmuto" + +#~ msgid "loaded" +#~ msgstr "zaváděn" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Z" + +#~ msgid "To" +#~ msgstr "Do" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " je příliš blízko ostatním, při tisku může docházet ke kolizím." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Nelze tisknout více filamentů, které mají velké teplotní rozdíly " +#~ "společně. Jinak může dojít k zablokování nebo poškození extruderu a " +#~ "trysky během tisku" + +#~ msgid "Ironing angle" +#~ msgstr "Úhel žehlení" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Úhel, pod kterým se provádí žehlení. Záporné číslo tuto funkci zakáže a " +#~ "použije výchozí metodu." + +#~ msgid "Remove small overhangs" +#~ msgstr "Odstranit malé převisy" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Odstranit malé převisy, které pravděpodobně nepotřebují podpěry." + +#~ msgid "External Spool" +#~ msgstr "Externí cívka" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Prosím zadejte platné hodnoty:\n" +#~ "Startovní teplota: <= 350\n" +#~ "Koncová teplota: >= 170\n" +#~ "Startovní teplota > Koncová teplota + 5)" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Zlepšete přesnost skořepiny úpravou vzdálenosti vnějších stěn. To také " +#~ "zlepšuje konzistence vrstev." + +#~ msgid "Enable filament ramming." +#~ msgstr "Povolit rapidní extruzi filamentu" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + kolečko myši" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + kolečko myši" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + levé tlačítko myši" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + pohyb myši nahoru nebo dolů" + +#~ msgid "Left mouse button:" +#~ msgstr "Levé tlačítko myši:" + +#~ msgid "Right mouse button:" +#~ msgstr "Pravé tlačítko myši:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + Levé tlačítko myši:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + Pravé tlačítko myši:" + +#~ msgid "Recent projects" +#~ msgstr "Nedávné projekty" + +#~ msgid "Maximum recent projects" +#~ msgstr "Maximální počet nedávných projektů" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Maximální počet nedávných projektů" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+libovolná šipka" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+levé tlačítko myši" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+levé tlačítko myši" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+libovolná šipka" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+levé tlačítko myši" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+levé tlačítko myši" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+levé tlačítko myši" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+libovolná šipka" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+kolečko myši" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+kolečko myši" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+kolečko myši" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+kolečko myši" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+kolečko myši" + +#~ msgid "Set Position" +#~ msgstr "Nastavení pozice" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Kliknutím pravým tlačítkem na ikonu opravíte objekt modelu" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "Cílový objekt obsahuje pouze jednu část a nelze jej rozdělit." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Barevné schéma" + +#~ msgid "Percent" +#~ msgstr "Procento" + +#~ msgid "Used filament" +#~ msgstr "Použito filamentu" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Více..." + +#~ msgid "More calibrations" +#~ msgstr "Další kalibrace" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SD karta" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Žádná SD karta" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD karta Abnormální" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Vysunutí zařízení %s(%s) se nezdařilo." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "Neplatné číslo" + +#~ msgid "Ramming settings" +#~ msgstr "Nastavení rapidní extruze" + +#~ msgid "Profile dependencies" +#~ msgstr "Profilové závislosti" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "konfigurační balíček je nekompatibilní s aktuální aplikací." + +#~ msgid "Total ramming time" +#~ msgstr "Celkový čas rapidní extruze" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Celkový objem rapidní extruze" + +#~ msgid "Ramming line width" +#~ msgstr "Šířka linky při rapidní extruzi" + +#~ msgid "Ramming line spacing" +#~ msgstr "Rozestup linek při rapidní extruzi" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Klasický režim" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Povolte tuto možnost pro použití klasického režimu" + +#~ msgid "Compatible machine" +#~ msgstr "Kompatibilní stroj" + +#~ msgid "Compatible machine condition" +#~ msgstr "Stav kompatibilního stroje" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Podmínka kompatibilních procesních profilů" + +#~ msgid "Default filament color" +#~ msgstr "Výchozí barva filamentu" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Největší výška tisknutelné vrstvy pro extruder. Používá se k omezení " +#~ "maximální výšky vrstvy při povolení adaptivní výšky vrstvy" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Nejnižší výška tisknutelné vrstvy pro extruder. Používá se k omezení " +#~ "minimální výšky vrstvy při povolení adaptivní výšky vrstvy" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Některé množství materiálu v extruderu je staženo zpět, aby se zabránilo " +#~ "slizu při dlouhém pohybu. Nastavte nulu, abyste zablokovali retrakce" + +#~ msgid "Speed of retractions." +#~ msgstr "Rychlost Retrakce" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Rychlost pro opětovné vkládání filamentu do extruderu. Nula znamená " +#~ "stejnou rychlost jako pro retrakce" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Rozestup linek. Nula znamená pevné rozhraní" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Minimální tloušťka tenkých prvků. Prvky modelu, které jsou tenčí než tato " +#~ "hodnota, nebudou vytištěny, zatímco prvky tlustší než minimální velikost " +#~ "prvku budou rozšířeny na minimální šířku stěny. Vyjadřuje se jako " +#~ "procento průměru trysky" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "Načítat aktuální nastavení procesu/stroje při použití aktuálního" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Nyní jsme přidali automatickou kalibraci pro různé filamenty, která je " +#~ "plně automatizovaná a výsledek bude uložen do tiskárny pro budoucí " +#~ "použití. Kalibraci musíte provést pouze v následujících omezených " +#~ "případech:\n" +#~ "1. Pokud použijete nový filament jiné značky/modelu nebo je filament " +#~ "vlhký;\n" +#~ "2. Pokud je tryska opotřebená nebo nahrazena novou;\n" +#~ "3. Pokud je maximální objemová rychlost nebo tisková teplota změněna v " +#~ "nastavení filamentu." + +#~ msgid "step: " +#~ msgstr "krok: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Refresh Printers" +#~ msgstr "Obnovit tiskárny" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Přidali jsme experimentální styl \" Tree Slim \" , který obsahuje menší " +#~ "podporovat objem, ale slabší sílu.\n" +#~ "Doporučujeme jej používat s: 0 vrstvami rozhraní, 0 horní vzdáleností, 2 " +#~ "stěnami." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Pro styly \"Tree Strong\" a \"Tree Hybrid\" doporučujeme následující " +#~ "nastavení: alespoň 2 vrstvy rozhraní, alespoň 0,1 mm horní z vzdálenost " +#~ "nebo používání podpůrných materiálů na rozhraní." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Průměr větve s dvojitými stěnami" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Větve s plochou větší, než je plocha kruhu o zadaném průměru, budou kvůli " +#~ "stabilitě tištěny s dvojitými stěnami. Nastavte tuto hodnotu na nulu, " +#~ "abyste zakázali dvojité stěny." + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Generování dráhy nástroje ve vrstvě %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Podpěry: detekovat převisy" + +#~ msgid "Support: propagate branches" +#~ msgstr "Podpěry: propagovat větve" + +#~ msgid "Support: draw polygons" +#~ msgstr "Podpěry: kreslení polygonů" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Podpěry: generování dráhy nástroje" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Podpěry: generování polygonů na vrstvě %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Podpěry: oprava děr ve vrstvě %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Podpěry: šíření větví na vrstvě %d" + +#~ msgid "Stopped." +#~ msgstr "Zastaveno." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Spojení selhalo [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Inicializace se nezdařila (Připojení zařízení není připraveno)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Inicializace se nezdařila (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Připojení k síti LAN se nezdařilo (odesílání tiskového souboru)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Krok 1, potvrďte, že Snapmaker Orca a vaše tiskárna jsou ve stejné síti LAN." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Krok 2, pokud se IP a přístupový kód níže liší od skutečných hodnot na " +#~ "tiskárně, opravte je." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Vynucené chlazení pro převisy a mosty" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Povolením této možnosti optimalizujete rychlost ventilátoru chlazení dílů " +#~ "pro převis a most, abyste získali lepší chlazení" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Rychlost ventilátoru pro převisy" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Vynutit ventilátor chlazení na tuto rychlost, když tisknete most nebo " +#~ "převislou stěnu, která má velký přesah. Vynucení chlazení převisu a mostu " +#~ "může získat lepší kvalitu těchto dílů" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Hranice chlazení převisů" + +#, fuzzy, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Vynutit chladicí ventilátor na určitou rychlost, když stupeň převisu " +#~ "tištěného dílu překročí tuto hodnotu. Vyjádřeno v procentech, které " +#~ "udává, jak velká šířka extruze bez podpěry spodní vrstvy. 0% znamená " +#~ "vynucení chlazení pro celou vnější stěnu bez ohledu na míru převisu" + +#~ msgid "Bridge infill direction" +#~ msgstr "Směr výplně mostu" + +#~ msgid "Bridge density" +#~ msgstr "Hustota mostu" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Hustota externích mostů. 100 % znamená pevný most. Výchozí hodnota je 100 " +#~ "%." + +#~ msgid "Thick bridges" +#~ msgstr "Silné přemostění" + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Tato rychlost ventilátoru je uplatněna během všech kontaktních vrstev, " +#~ "aby bylo možné oslabit jejich spojení vysokou rychlostí ventilátoru.\n" +#~ "Nastavte hodnotu -1 pro zrušení tohoto přepisu.\n" +#~ "Tuto hodnotu lze přepsat pouze pomocí disable_fan_first_layers." + +#~ msgid "" +#~ "A lower value results in smoother extrusion rate transitions. However, " +#~ "this results in a significantly larger G-code file and more instructions " +#~ "for the printer to process.\n" +#~ "\n" +#~ "Default value of 3 works well for most cases. If your printer is " +#~ "stuttering, increase this value to reduce the number of adjustments " +#~ "made.\n" +#~ "\n" +#~ "Allowed values: 1-5" +#~ msgstr "" +#~ "Nižší hodnota způsobí hladší přechody rychlosti extruze. To však má za " +#~ "následek výrazně větší soubor G-kódu a více instrukcí pro tiskárnu.\n" +#~ "\n" +#~ "Výchozí hodnota 3 dobře funguje ve většině případů. Pokud vaše tiskárna " +#~ "má problémy, zkuste zvýšit tuto hodnotu, abyste snížili počet úprav\n" +#~ "\n" +#~ "Povolené hodnoty: 1-5" + +#~ msgid "Unselect" +#~ msgstr "Zrušení výběru" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Měřítko" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Vynutit Zvednout Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-hop při retrakci" + +#~ msgid "Reverse on odd" +#~ msgstr "Obrátit na lichých" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Počet milimetrů, o které musí být převis pro zvážení, zda je obrácení " +#~ "užitečné. Může to být určité % o z obvodové šířky.\n" +#~ "Hodnota 0 umožňuje obrácení na každé liché vrstvě bez ohledu na jiné " +#~ "faktory." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Během tisku podle objektu může extruder narazit na obrys.\n" +#~ "Takže resetujte vrstvu obrysu na 1, abyste tomu zabránili." + +#~ msgid "Limited" +#~ msgstr "Omezeno" + +#~ msgid "Shrinkage" +#~ msgstr "Smrštění" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Snižte tuto hodnotu mírně (například 0,9), abyste snížili množství " +#~ "materiálu pro most a zlepšili prověšení" + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Tento faktor ovlivňuje množství materiálu pro vrchní plnou výplň. Můžete " +#~ "jej mírně snížit, abyste měli hladký povrch" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "Tento faktor ovlivňuje množství materiálu pro spodní plnou výplň" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Povolte tuto možnost pro zpomalení tisku na místech, kde mohou existovat " +#~ "potenciální zakroucené obvody" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Rychlost mostu a zcela převislé stěny" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Rychlost vnitřního mostu. Pokud je hodnota vyjádřena jako procento, bude " +#~ "vypočítána na základě most_speed. Výchozí hodnota je 150 %." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Čas na zavedení nového filamentu při výměně filamentu. Pouze pro " +#~ "statistiku" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Čas vytažení starého filamentu při výměně filamentu. Pouze pro statistiku" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) " +#~ "zavádí nový filament během jeho výměny (při provádění kódu T). Tento čas " +#~ "je přidán k celkové době tisku pomocí G-kódu odhadovače tiskového času." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) " +#~ "vysouvá filament během jeho výměny (při provádění kódu T). Tento čas je " +#~ "přidán k celkové době tisku pomocí G-kódu odhadovače tiskového času." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtrovat mezery menší než stanovená hranice" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Zapněte tuto volbu pro řízení teploty v komoře. Příkaz M191 bude přidán " +#~ "před \"machine_start_gcode\"\n" +#~ "G-kód příkazy: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Vyšší teplota komory může pomoci potlačit nebo snížit odchlipování a " +#~ "potenciálně vést k vyšší pevnosti spojů mezi vrstvami pro materiály s " +#~ "vysokou teplotou, jako je ABS, ASA, PC, PA a další. Zároveň se však " +#~ "zhorší filtrace vzduchu pro ABS a ASA. Naopak pro PLA, PETG, TPU, PVA a " +#~ "další materiály s nízkou teplotou by teplota komory neměla být vysoká, " +#~ "aby se předešlo zanášení, takže je velmi doporučeno použít hodnotu 0, " +#~ "která znamená vypnutí" + +#~ msgid "Wipe tower extruder" +#~ msgstr "Extruder čistící věže" + #~ msgid "Printer local connection failed, please try again." #~ msgstr "Lokální připojení k tiskárně selhalo, zkuste to znovu." @@ -16008,12 +20694,9 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Prosím, najděte roh s dokonalým stupněm extruze" -#~ msgid "V" -#~ msgstr "V" - #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca je založen na BambuStudio od Bambulab, které je od " @@ -16043,37 +20726,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Vysunout Filament" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Vyberte slot AMS a poté stiskněte \" Načíst \" nebo \" Uvolnit \" pro " -#~ "automatické načtení nebo vyjměte vlákno." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Základní deska" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- ℃" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "active" #~ msgstr "aktivní" @@ -16112,7 +20767,7 @@ msgstr "" #~ "proces. Během této doby indikátor nemusí představovat komoru přesně." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Poznámka: Pokud se během tisku vloží nový filament, AMS nebude " @@ -16128,8 +20783,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Inicializace se nezdařila (žádné kamerové zařízení)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Tiskárna je zaneprázdněna stahováním, počkejte prosím na dokončení " #~ "stahování." @@ -16160,28 +20814,28 @@ msgstr "" #~ msgid "Load failed [%d]" #~ msgstr "Načítání selhalo [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "Nepodařilo se načíst informace o modelu z tiskárny." -#~ msgid "Failed to parse model infomations." +#~ msgid "Failed to parse model informations." #~ msgstr "Nepodařilo se zpracovat informace o modelu." #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Změnili jste některá nastavení předvolby \"%1%\" . \n" +#~ "Změnili jste některá nastavení předvolby \"%1%\" .\n" #~ "Přejete si po přepnutí zachovat tato změněná nastavení (nová " #~ "hodnota)přednastavení?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Změnili jste některá přednastavená nastavení. \n" +#~ "Změnili jste některá přednastavená nastavení.\n" #~ "Přejete si po přepnutí zachovat tato změněná nastavení (nová " #~ "hodnota)přednastavení?" @@ -16195,19 +20849,9 @@ msgstr "" #~ "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn " #~ "(vrchních a spodních plných vrstev)" -#~ msgid " " -#~ msgstr " " - #~ msgid "Configuration package updated to " #~ msgstr "Konfigurační balíček aktualizován na " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "Zlepšete přesnost skořepiny úpravou vzdálenosti vnějších stěn. To také " -#~ "zlepšuje konzistence vrstev." - #~ msgid "" #~ "The minimum printing speed for the filament when slow down for better " #~ "layer cooling is enabled, when printing overhangs and when feature speeds " @@ -16217,21 +20861,14 @@ msgstr "" #~ "lepší chlazení vrstev, při tisku převisů a pokud rychlosti prvků nejsou " #~ "explicitně určeny." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Bez řídkých vrstev (EXPERIMENTÁLNÍ)" - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "Nelze načíst konfiguraci." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "3mf je generován starým Snapmaker Orcaem, načtěte pouze geometrická data." - #~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " +#~ "Relative extrusion is recommended when using \"label_objects\" option. " +#~ "Some extruders work better with this option unchecked (absolute extrusion " #~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" +#~ "enabled on BambuLab printers. Default is checked." #~ msgstr "" #~ "Při použití volby \"label_objects\" se doporučuje relativní extruzi. " #~ "Některé extrudery fungují lépe, když je tato možnost odškrtnuta (režim " @@ -16266,10 +20903,10 @@ msgstr "" #~ msgstr "spojky jsou mimo objekt" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Neplatný stav. \n" +#~ "Neplatný stav.\n" #~ "Není vybrána žádná část pro zachování po řezu" #~ msgid "Edit Text" @@ -16284,9 +20921,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "Vyberte SLA archiv:" -#~ msgid "Import file" -#~ msgstr "Importovat soubor" - #~ msgid "Import model and profile" #~ msgstr "Importovat model a profil" @@ -16350,13 +20984,13 @@ msgstr "" #~ "Ano - přepnout na přímočarý vzor automaticky\n" #~ "Ne - automaticky resetovat hustotu na výchozí ne 100% hodnotu" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "Před vložením filamentu zahřejte trysku na více než 170 stupňů." -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "Zobrazit okno s G-kódem" -#~ msgid "If enabled, g-code window will be displayed." +#~ msgid "If enabled, G-code window will be displayed." #~ msgstr "Pokud je povoleno, zobrazí se okno s G-kódem." #, fuzzy, c-format @@ -16373,9 +21007,6 @@ msgstr "" #~ msgid " doesn't work at 100%% density " #~ msgstr " nefunguje při 100%% hustotě " -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Nástroj-Plochou na podložku" @@ -16394,7 +21025,7 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Exportovat všechny objekty jako STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "3mf není kompatibilní, načtěte pouze geometrická data!" #~ msgid "Incompatible 3mf" @@ -16452,161 +21083,11 @@ msgstr "" #~ msgid "%%" #~ msgstr "%%" -#~ msgid "Export 3MF" -#~ msgstr "Exportovat 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Exportovat projekt jako 3MF." - -#~ msgid "Export slicing data" -#~ msgstr "Exportovat data Slicování" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Exportovat data Slicování do složky." - -#~ msgid "Load slicing data" -#~ msgstr "Načíst data Slicování" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Načíst data dělení z mezipaměti z adresáře" - -#~ msgid "Export STL" -#~ msgstr "Exportovat STL" - #~ msgid "Export the objects as multiple STL." #~ msgstr "Exportovat objekty jako více STL souborů." -#~ msgid "Slice" -#~ msgstr "Slicovat" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "" -#~ "Slicovat podložky: 0-všechny podložky, i- podložku i, ostatní-neplatné" - -#~ msgid "Show command help." -#~ msgstr "Zobrazit nápovědu k příkazu." - -#~ msgid "UpToDate" -#~ msgstr "Aktualizováno" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Aktualizujte konfigurační hodnoty 3mf na nejnovější." - -#~ msgid "Load default filaments" -#~ msgstr "Načíst výchozí filamenty" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Načíst první filament jako výchozí pro ty, které nebyly načteny" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max počet trojúhelníků na podložku pro slicování." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "max čas slicování na podložku v sekundách." - -#~ msgid "Normative check" -#~ msgstr "Normativní kontrola" - -#~ msgid "Check the normative items." -#~ msgstr "Kontrola normativních prvků." - -#~ msgid "Output Model Info" -#~ msgstr "Info o výstupním modelu" - -#~ msgid "Output the model's information." -#~ msgstr "Vytisknout informace o modelu." - -#~ msgid "Export Settings" -#~ msgstr "Nastavení exportu" - -#~ msgid "Export settings to a file." -#~ msgstr "Exportovat nastavení do souboru." - -#~ msgid "Send progress to pipe" -#~ msgstr "Poslat průběh do roury" - -#~ msgid "Send progress to pipe." -#~ msgstr "Poslat průběh do roury." - -#~ msgid "Arrange Options" -#~ msgstr "Volby uspořádání" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Volby uspořádání: 0-zakázat, 1-povolit, ostatní-automaticky" - -#~ msgid "Repetions count" -#~ msgstr "Počet opakování" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Počet opakování celého modelu" - -#~ msgid "Convert Unit" -#~ msgstr "Převést jednotku" - -#~ msgid "Convert the units of model" -#~ msgstr "Převést jednotky modelu" - -#~ msgid "Rotate around X" -#~ msgstr "Rotace kolem osy X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "Úhel rotace kolem osy X v stupních." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Měřítko modelu pomocí plovoucího faktoru" - -#~ msgid "Load General Settings" -#~ msgstr "Načíst obecná nastavení" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Načíst nastavení procesu/stroje ze zadaného souboru" - -#~ msgid "Load Filament Settings" -#~ msgstr "Načíst nastavení filamentu" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Načíst nastavení filamentu ze zadaného seznamu souborů" - -#~ msgid "Skip Objects" -#~ msgstr "Přeskočit objekty" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Přeskočit některé objekty při tisku" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "Načítat aktuální nastavení procesu/stroje při použití aktuálního" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "Načítat aktuální nastavení procesu/stroje ze zadaného souboru při použití " -#~ "aktuálního" - -#~ msgid "Output directory" -#~ msgstr "Výstupní adresář" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Výstupní adresář pro exportované soubory." - -#~ msgid "Debug level" -#~ msgstr "Úroveň ladění" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " -#~ "4:debug, 5:sledovat\n" - #, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "Vybraná předvolba: %1% nebyla nalezena." #~ msgid "" @@ -16627,25 +21108,14 @@ msgstr "" #~ "Věděli jste, že můžete opravit poškozený 3D model a vyhnout se tak mnoha " #~ "problémům při slicování?" -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "Kdy potřebujete tisknout s otevřenými dveřmi tiskárny\n" -#~ "Otevření dveří tiskárny může snížit pravděpodobnost ucpaní extruderu/" -#~ "hotendu při tisku filamentu s nižší teplotou a vyšší teplotě uzavřeného " -#~ "prostoru. Další informace naleznete ve Wiki." - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Vloženo" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor Snapmaker Orca může být poškozen a nelze jej analyzovat." +#~ "Konfigurační soubor Snapmaker Orca může být poškozen a nelze jej analyzovat. " #~ "Smažte soubor a zkuste to znovu." #~ msgid "Online Models" @@ -16659,12 +21129,12 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" +#~ "automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same " #~ "brand, material type, and color)" #~ msgstr "" #~ "Aktuálně nejsou k dispozici žádné shodné náhradní spotřební materiály a " -#~ "automatické doplnění momentálně není možné. \n" +#~ "automatické doplnění momentálně není možné.\n" #~ "(Aktuálně podporuje automatické dodávky spotřebních materiálů se stejnou " #~ "značkou, typem materiálu a barvou)" @@ -16728,14 +21198,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "Kalibrace extruze" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Zasuňte nový filament do extruderu" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "Teplota podložky ostatních vrstev je nižší než teplota podložky první " #~ "vrstvy o více než %d stupňů Celsia.\n" @@ -16781,8 +21248,8 @@ msgstr "" #~ msgstr "High Temp Podložka" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Toto je teplota podložky, když je instalována konstrukční podložka. " #~ "Hodnota 0 znamená, že filament nepodporuje tisk na High Temp Podložku" @@ -16792,10 +21259,10 @@ msgstr "" #~ msgid "" #~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " +#~ "internal bridges. These support loops could prevent internal bridges from " #~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" +#~ "when the sparse infill density is low. This value determines the " +#~ "thickness of the support loops. 0 means disable this feature" #~ msgstr "" #~ "Pokud je povoleno, podpůrné smyčky budou generovány pod obrysy interních " #~ "mostů. Tyto podpůrné smyčky mohou zabránit extruzi materiálu do vzduchu a " @@ -16803,11 +21270,6 @@ msgstr "" #~ "Tato hodnota určuje tloušťku podpůrných smyček. Hodnota 0 znamená, že " #~ "tato funkce je zakázána." -#, fuzzy, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "Klipper max_accel_to_decel bude upraven na toto % zrychlení" - #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " #~ "supports into a regular grid will create more stable supports (default), " @@ -16844,7 +21306,7 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Zadejte prosím platné hodnoty:\n" #~ "start > 0 krok >= 0\n" @@ -16853,8 +21315,8 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Zadejte prosím platné hodnoty:\n" #~ "start > 10 kroků >= 0\n" -#~ "konec > začátek + krok)" +#~ "konec > začátek + krok)" \ No newline at end of file diff --git a/localization/i18n/de/Snapmaker_Orca_de.po b/localization/i18n/de/Snapmaker_Orca_de.po index 776f5f9811..e48e2854f1 100644 --- a/localization/i18n/de/Snapmaker_Orca_de.po +++ b/localization/i18n/de/Snapmaker_Orca_de.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -14,11 +14,139 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" "X-Generator: Poedit 3.4.2\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" +"Das Filament ist möglicherweise nicht mit den aktuellen " +"Maschineneinstellungen kompatibel. Es werden generische Filament-" +"Voreinstellungen verwendet." + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "Das Filamentmodell ist unbekannt. Es wird weiterhin die vorherige " + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" +"Das Filamentmodell ist unbekannt. Es werden generische Filament-" +"Voreinstellungen verwendet." + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" +"Das Filament ist möglicherweise nicht mit den aktuellen " +"Maschineneinstellungen kompatibel. Es wird eine zufällige Filament-" +"Voreinstellung verwendet." + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" +"Das Filamentmodell ist unbekannt. Es wird eine zufällige Filament-" +"Voreinstellung verwendet." + +msgid "right" +msgstr "rechts" + +msgid "left" +msgstr "links" + +msgid "right extruder" +msgstr "rechter Extruder" + +msgid "left extruder" +msgstr "linker Extruder" + +msgid "extruder" +msgstr "Extruder" + +msgid "TPU is not supported by AMS." +msgstr "TPU wird von AMS nicht unterstützt." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Feuchtes PVA wird flexibel und bleibt im AMS stecken, bitte trocknen Sie es " +"vor dem Gebrauch." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" +"Feuchtes PVA ist flexibel und kann im Extruder stecken bleiben.Bitte " +"trocknen Sie es vor der Verwendung." + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" +"Die raue Oberfläche von PLA Glow kann den Verschleiß des AMS-Systems " +"beschleunigen, insbesondere der internen Komponenten des AMS Lite." + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"CF/GF-Filamente sind hart und spröde. Sie brechen leicht oder bleiben im AMS " +"stecken. Bitte verwenden Sie sie mit Vorsicht." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" +"PPS-CF ist spröde und könnte im gebogenen PTFE-Schlauch über dem " +"Werkzeugkopf brechen." + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" +"PPA-CF ist spröde und könnte im gebogenen PTFE-Schlauch über dem " +"Werkzeugkopf brechen." + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "%s wird vom %s Extruder nicht unterstützt." + +msgid "Current AMS humidity" +msgstr "Aktuelle AMS-Feuchtigkeit" + +msgid "Humidity" +msgstr "Luftfeuchtigkeit" + +msgid "Temperature" +msgstr "Temperatur" + +msgid "Left Time" +msgstr "Verbleibende Zeit" + +msgid "Drying" +msgstr "Trocknen" + +msgid "Idle" +msgstr "Inaktiv" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "%d ℃" + +msgid "Serial:" +msgstr "Seriennummer:" + +msgid "Version:" +msgstr "Version:" + +msgid "Latest version" +msgstr "Neueste Version" + +msgid "Support Painting" msgstr "Stützen aufmalen" -msgid "Alt + Mouse wheel" -msgstr "Alt + Mausrad" +msgid "Ctrl+" +msgstr "Strg +" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Umschalt+" + +msgid "Mouse wheel" +msgstr "Mausrad" msgid "Section view" msgstr "Abschnittsansicht" @@ -26,9 +154,6 @@ msgstr "Abschnittsansicht" msgid "Reset direction" msgstr "Ausrichtung zurücksetzen" -msgid "Ctrl + Mouse wheel" -msgstr "Strg + Mausrad" - msgid "Pen size" msgstr "Pinselgröße" @@ -44,9 +169,6 @@ msgstr "rechte Maustaste" msgid "Block supports" msgstr "Support blockieren" -msgid "Shift + Left mouse button" -msgstr "Shift + linke Maustaste" - msgid "Erase" msgstr "Löschen" @@ -104,14 +226,14 @@ msgid "Support Generated" msgstr "Support generiert" msgid "Gizmo-Place on Face" -msgstr "Gizmo auf Fläche platzieren" +msgstr "Gizmo-auf Fläche platzieren" msgid "Lay on face" msgstr "Auf Fläche legen" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Die Anzahl der Filamente übersteigt die maximale Anzahl, die das Malwerkzeug " @@ -154,12 +276,21 @@ msgstr "Flächenfüllung" msgid "Height range" msgstr "Höhenbereich" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "Enter" msgid "Toggle Wireframe" msgstr "Gittermodell ein-/ausblenden" +msgid "Remap filaments" +msgstr "Filament zuordnen" + +msgid "Remap" +msgstr "Zuordnung" + +msgid "Cancel" +msgstr "Abbrechen" + msgid "Shortcut Key " msgstr "Tastenkürzel" @@ -182,9 +313,33 @@ msgstr "Gemalte Farbe entfernen" msgid "Painted using: Filament %1%" msgstr "Gemalt mit: Filament %1%" +msgid "Filament remapping finished." +msgstr "Filamentzuordnung abgeschlossen." + +msgid "Paint-on fuzzy skin" +msgstr "Fuzzy Skin einfärben" + +msgid "Brush size" +msgstr "Pinselgröße" + +msgid "Brush shape" +msgstr "Pinselform" + +msgid "Add fuzzy skin" +msgstr "Fuzzy Skin hinzufügen" + +msgid "Remove fuzzy skin" +msgstr "Fuzzy Skin entfernen" + +msgid "Reset selection" +msgstr "Auswahl zurücksetzen" + msgid "Move" msgstr "Bewegen" +msgid "Please select at least one object." +msgstr "Bitte wählen Sie mindestens ein Objekt aus." + msgid "Gizmo-Move" msgstr "Gizmo-Bewegen" @@ -215,14 +370,20 @@ msgstr "in" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "Teilauswahl" + +msgid "Fixed step drag" +msgstr "Fester Schritt ziehen" + +msgid "Single sided scaling" +msgstr "Einseitige Skalierung" + msgid "Position" msgstr "Position" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Drehung" +msgid "Rotate (relative)" +msgstr "Rotation (relativ)" msgid "Scale ratios" msgstr "Skalierungsverhältnisse" @@ -239,9 +400,6 @@ msgstr "Versetzen" msgid "Group Operations" msgstr "Gruppen Operationen" -msgid "Set Position" -msgstr "Position setzen" - msgid "Set Orientation" msgstr "Ausrichtung festlegen" @@ -254,22 +412,33 @@ msgstr "Position zurücksetzen" msgid "Reset Rotation" msgstr "Rotation zurücksetzen" -msgid "World coordinates" -msgstr "Weltkoordinaten" - msgid "Object coordinates" msgstr "Objektkoordinaten" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Weltkoordinaten" + +msgid "Translate(Relative)" +msgstr "Verschieben (relativ)" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" +"Setze die aktuelle Rotation auf den Wert zurück, als das Rotationswerkzeug " +"geöffnet wurde." + +msgid "Rotate (absolute)" +msgstr "Rotation (absolut)" + +msgid "Reset current rotation to real zeros." +msgstr "Setze die aktuelle Rotation auf die realen Nullen zurück." + +msgid "Part coordinates" +msgstr "Teile Koordinaten" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Größe" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "einheitliche Skalierung" @@ -333,6 +502,12 @@ msgstr "Form" msgid "Depth" msgstr "Tiefe" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Drehung" + msgid "Groove" msgstr "Nut" @@ -434,9 +609,6 @@ msgstr "Platzverhältnis in Bezug auf den Radius" msgid "Confirm connectors" msgstr "Bestätige Verbinder" -msgid "Cancel" -msgstr "Abbrechen" - msgid "Build Volume" msgstr "Bau Volumen" @@ -597,14 +769,10 @@ msgstr "%d Dreiecke" msgid "Show wireframe" msgstr "Gittermodell anzeigen" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Kann nicht angewendet werden, wenn die Vorschau angezeigt wird." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operation wird bereits abgebrochen. Bitte warten Sie einige Sekunden." msgid "Face recognition" @@ -613,12 +781,6 @@ msgstr "Gesichtserkennung" msgid "Perform Recognition" msgstr "Erkennung durchführen" -msgid "Brush size" -msgstr "Pinselgröße" - -msgid "Brush shape" -msgstr "Pinselform" - msgid "Enforce seam" msgstr "Naht erzwingen" @@ -655,7 +817,7 @@ msgid "Angle" msgstr "Winkel" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Eingebettete\n" @@ -670,8 +832,8 @@ msgstr "Oberfläche" msgid "Horizontal text" msgstr "Horizontaler Text" -msgid "Shift + Mouse move up or down" -msgstr "Umschalttaste + Mausbewegung nach oben oder unten" +msgid "Mouse move up or down" +msgstr "Maus nach oben oder unten bewegen" msgid "Rotate text" msgstr "Text drehen" @@ -796,7 +958,7 @@ msgid "Change Text Type" msgstr "Ändere Texttyp" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Umbenennen des Stils (%1%) für geprägten Text" msgid "Name can't be empty." @@ -975,7 +1137,7 @@ msgid "Undo boldness" msgstr "Dicke rückgängig machen" msgid "Tiny / Wide glyphs" -msgstr "Tiny / Wide glyphs" +msgstr "Winzige / breite Glyphen" msgid "Undo letter's skew" msgstr "Rückgängig machen der Schriftneigung" @@ -992,7 +1154,7 @@ msgstr "Abstand des Textmittelpunkts zur Modell-Oberfläche." msgid "Undo rotation" msgstr "Rotation rückgängig machen" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "im Uhrzeigersinn drehen." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1014,10 +1176,15 @@ msgstr "Setze Text zur Kamera" msgid "Orient the text towards the camera." msgstr "Ortne den Text zur Kamera aus." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" +"Schriftart \"%1%\" kann nicht verwendet werden. Bitte wählen Sie eine andere." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "Kann genau dieselbe Schriftart (\"%1%\") nicht laden. Die Anwendung hat eine " "ähnliche (\"%2%\") ausgewählt. Sie müssen eine Schriftart angeben, um die " @@ -1133,13 +1300,13 @@ msgstr "ausgefüllten Pfad öffnen" msgid "Undefined stroke type" msgstr "Undefinierter Strich-Typ" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" "Pfad kann nicht von Selbstüberschneidungen und mehreren Punkten geheilt " "werden." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "Die endgültige Form enthält Selbstüberschneidungen oder mehrere Punkte mit " @@ -1149,7 +1316,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "Shape ist als unsichtbar markiert (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Füllung der Form (%1%) enthält nicht unterstützte: %2%." @@ -1179,7 +1346,8 @@ msgstr "Neu laden der SVG-Datei von der Festplatte." msgid "Change file" msgstr "Datei wechseln" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Wechsel zu einer anderen .svg-Datei" msgid "Forget the file path" @@ -1206,7 +1374,8 @@ msgstr "Speichern als" msgid "Save SVG file" msgstr "SVG-Datei speichern" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "Speichern als '.svg'-Datei" msgid "Size in emboss direction." @@ -1275,6 +1444,9 @@ msgstr "Nano SVG-Parser kann nicht aus Datei laden (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG-Datei enthält keinen einzigen Pfad zum Prägen (%1%)." +msgid "No feature" +msgstr "Kein Feature" + msgid "Vertex" msgstr "Eckpunkt" @@ -1299,9 +1471,6 @@ msgstr "Zentrum der Kante" msgid "Center of circle" msgstr "Zentrum des Kreises" -msgid "ShiftLeft mouse button" -msgstr "Umschalttaste + Linksklick" - msgid "Select feature" msgstr "Feature auswählen" @@ -1317,18 +1486,24 @@ msgstr "Auswahl neu starten" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Abwählen" +msgid "Cancel a feature until exit" +msgstr "Abbrechen einer Funktion bis zum Verlassen" msgid "Measure" msgstr "Messen" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Bitte bestätigen Sie das Explosionsverhältnis = 1, und wählen Sie mindestens " +"ein Objekt aus" + msgid "Edit to scale" msgstr "Bearbeiten auf Skala" msgctxt "Verb" -msgid "Scale" -msgstr "Skalieren" +msgid "Scale all" +msgstr "Alle skalieren" msgid "None" msgstr "Keine" @@ -1342,6 +1517,48 @@ msgstr "Länge" msgid "Selection" msgstr "Auswahl" +msgid " (Moving)" +msgstr " (Bewegen)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Wählen Sie 2 Flächen auf Objekten aus und \n" +"lassen Sie die Objekte zusammenfügen." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Wählen Sie 2 Punkte oder Kreise auf Objekten aus und \n" +"geben Sie den Abstand zwischen ihnen an." + +msgid "Face" +msgstr "Fläche" + +msgid " (Fixed)" +msgstr " (Fest)" + +msgid "Point" +msgstr "Punkt" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Feature 1 wurde zurückgesetzt, \n" +"Feature 2 wurde zu Feature 1" + +msgid "Warning: please select Plane's feature." +msgstr "Warnung: Bitte wählen Sie die Funktion der Ebene." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Warnung: Bitte wählen Sie die Funktion des Punktes oder Kreises." + +msgid "Warning: please select two different meshes." +msgstr "Warnung: Bitte wählen Sie zwei verschiedene Mesh-Netze." + msgid "Copy to clipboard" msgstr "In Zwischenablage kopieren" @@ -1357,8 +1574,26 @@ msgstr "Direkte Entfernung" msgid "Distance XYZ" msgstr "Entfernung XYZ" -msgid "Ctrl+" -msgstr "Strg +" +msgid "Parallel" +msgstr "Parallele" + +msgid "Center coincidence" +msgstr "Zentrumsgleichheit" + +msgid "Feature 1" +msgstr "Funktion 1" + +msgid "Reverse rotation" +msgstr "Rotation umkehren" + +msgid "Rotate around center:" +msgstr "Um Zentrum drehen:" + +msgid "Parallel distance:" +msgstr "Parallele Entfernung:" + +msgid "Flip by Face 2" +msgstr "Umdrehen durch Fläche 2" msgid "Notice" msgstr "Hinweis" @@ -1398,8 +1633,11 @@ msgstr "" "Konfigurationsdatei \"%1%\" wurde geladen, aber einige Werte wurden nicht " "erkannt." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Basierend auf PrusaSlicer und BambuStudio" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca wird wegen Arbeitsspeichermangels beendet, was ein Bug sein kann. " @@ -1450,6 +1688,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2-Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Ressourcenpfad existiert nicht oder ist kein Verzeichnis: %s" + #, c-format, boost-format msgid "" "%s\n" @@ -1500,27 +1742,27 @@ msgstr "Aktuelle Profile laden" msgid "Loading a mode view" msgstr "Laden einer Modusansicht" -msgid "Choose one file (3mf):" -msgstr "Wählen sie eine Datei (3mf):" +msgid "Choose one file (3MF):" +msgstr "Wählen sie eine Datei (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Wählen sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Wählen sie eine oder mehrere Dateien (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Wählen sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Wählen sie eine oder mehrere Dateien (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "ZIP Datei wählen" -msgid "Choose one file (gcode/3mf):" -msgstr "Wählen sie eine Datei (3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Wählen sie eine Datei (GCODE/3MF):" msgid "Some presets are modified." msgstr "Einige Profileinstellungen wurden geändert." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Sie können die geänderten Profile in das neue Projekt übernehmen, verwerfen " @@ -1539,7 +1781,7 @@ msgstr "Projekt öffnen" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Die Version von Snapmaker Orca ist veraltet und muss auf die neueste Version " "aktualisiert werden, bevor sie normal verwendet werden kann" @@ -1611,7 +1853,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Initialisierung der Snapmaker Orca GUI ist fehlgeschlagen" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Schwerwiegender Fehler, Ausnahme: %1%" msgid "Quality" @@ -1641,12 +1883,18 @@ msgstr "Obere volle Schichten" msgid "Top Minimum Shell Thickness" msgstr "Obere minimale Schalendicke" +msgid "Top Surface Density" +msgstr "Obere Flächendichte" + msgid "Bottom Solid Layers" msgstr "Untere volle Schichten" msgid "Bottom Minimum Shell Thickness" msgstr "Minimale Dicke der unteren Schichten" +msgid "Bottom Surface Density" +msgstr "Untere Flächendichte" + msgid "Ironing" msgstr "Glätten" @@ -1713,6 +1961,9 @@ msgstr "Entf" msgid "Delete the selected object" msgstr "Ausgewähltes Objekt löschen" +msgid "Backspace" +msgstr "Rücktaste" + msgid "Load..." msgstr "Laden..." @@ -1734,6 +1985,9 @@ msgstr "Torus" msgid "Orca Cube" msgstr "Orca Würfel" +msgid "Orca Tolerance Test" +msgstr "Orca Toleranz Test" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1751,7 +2005,7 @@ msgstr "Orca String Hell" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1810,7 +2064,13 @@ msgid "Replace with STL" msgstr "Durch STL Datei austauschen" msgid "Replace the selected part with new STL" -msgstr "Ausgewähltes Teil durch eine neue STL ersetzen." +msgstr "Ausgewähltes Teil durch eine neue STL ersetzen" + +msgid "Replace all with STL" +msgstr "Alle durch STL Dateien austauschen" + +msgid "Replace all selected parts with STL from folder" +msgstr "Ausgewählte Teile durch neue STL aus Ordner ersetzen" msgid "Change filament" msgstr "Filament wechseln" @@ -1849,16 +2109,16 @@ msgstr "Düse in der Stützstruktur des Objekts reinigen" msgid "Edit in Parameter Table" msgstr "Bearbeiten in der Parametertabelle" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Von Inch umrechnen" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Zu Inch zurücksetzen" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Von Metern umrechnen" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Auf Meter zurücksetzen" msgid "Assemble" @@ -1946,10 +2206,19 @@ msgstr "Das ausgewählte Objekt teilen" msgid "Auto orientation" msgstr "Automatische Ausrichtung" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "" "Automatische Ausrichtung des Objekts zur Verbesserung der Druckqualität." +msgid "Edit" +msgstr "Bearbeiten" + +msgid "Delete this filament" +msgstr "Diesen Filament löschen" + +msgid "Merge with" +msgstr "Zusammenführen mit" + msgid "Select All" msgstr "Alle auswählen" @@ -1986,6 +2255,31 @@ msgstr "Platte löschen" msgid "Remove the selected plate" msgstr "Aktuelle Druckplatte entfernen" +msgid "Add instance" +msgstr "Instanz hinzufügen" + +msgid "Add one more instance of the selected object" +msgstr "Füge eine weitere Instanz des ausgewählten Objekts hinzu" + +msgid "Remove instance" +msgstr "Instanz entfernen" + +msgid "Remove one instance of the selected object" +msgstr "Entferne eine Instanz des ausgewählten Objekts" + +msgid "Set number of instances" +msgstr "Anzahl der Instanzen festlegen" + +msgid "Change the number of instances of the selected object" +msgstr "Ändern der Anzahl der Instanzen des ausgewählten Objekts" + +msgid "Fill bed with instances" +msgstr "Bett mit Instanzen füllen" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" +"Füllen des verbleibenden Bettbereich mit Instanzen des ausgewählten Objekts" + msgid "Clone" msgstr "Duplizieren" @@ -1995,9 +2289,18 @@ msgstr "Modell vereinfachen" msgid "Center" msgstr "Zur Mitte" +msgid "Drop" +msgstr "Ablegen" + msgid "Edit Process Settings" msgstr "Prozesseinstellungen" +msgid "Copy Process Settings" +msgstr "Kopiere Prozesseinstellungen" + +msgid "Paste Process Settings" +msgstr "Füge Prozesseinstellungen ein" + msgid "Edit print parameters for a single object" msgstr "Druckparameter für ein einzelnes Objekt bearbeiten" @@ -2043,10 +2346,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d „non-manifold\" Kante" msgstr[1] "%1$d „non-manifold\" Kanten" -msgid "Right click the icon to fix model object" -msgstr "" -"Klicken Sie mit der rechten Maustaste auf das Symbol, um das Modellobjekt zu " -"reparieren" +msgid "Click the icon to repair model object" +msgstr "Klicken Sie auf das Symbol, um das Modellobjekt zu reparieren" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2107,6 +2408,9 @@ msgstr "" "Wechseln Sie in den objektbezogenen Einstellungsmodus, um die " "Prozesseinstellungen der ausgewählten Objekte zu bearbeiten." +msgid "Remove paint-on fuzzy skin" +msgstr "Entferne die aufgemalte, fizzy Außenhaut" + msgid "Delete connector from object which is a part of cut" msgstr "Lösche den Verbinder aus dem Objekt, das Teil des Schnitts ist." @@ -2125,10 +2429,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Durch diese Aktion wird eine Schnittkorrespondenz unterbrochen.\n" "Danach kann die Modellkonsistenz nicht garantiert werden.\n" @@ -2142,8 +2446,8 @@ msgstr "Lösche alle Verbinder" msgid "Deleting the last solid part is not allowed." msgstr "Das Löschen des letzten festen Teils ist nicht erlaubt." -msgid "The target object contains only one part and can not be splited." -msgstr "Das Zielobjekt enthält nur einen Teil und kann nicht geteilt werden." +msgid "The target object contains only one part and can not be split." +msgstr "Das Zielobjekt enthält nur ein Teil und kann nicht geteilt werden." msgid "Assembly" msgstr "Zusammenbau" @@ -2185,14 +2489,14 @@ msgid "Selection conflicts" msgstr "Auswahlkonflikte" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Wenn das erste ausgewählte Element ein Objekt ist, sollte das zweite " "ebenfalls ein Objekt sein." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Wenn das erste ausgewählte Element ein Teil ist, sollte das zweite ein Teil " "desselben Objekts sein." @@ -2257,7 +2561,7 @@ msgstr "" "eine Zelle kann nur in eine oder mehrere Zellen in derselben Spalte kopiert " "werden" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "Das Kopieren mehrerer Zellen wird nicht unterstützt" msgid "Outside" @@ -2278,6 +2582,9 @@ msgstr "Automatische Umrandung" msgid "Mouse ear" msgstr "Mausohren" +msgid "Painted" +msgstr "Bemalt" + msgid "Outer brim only" msgstr "Nur Außen" @@ -2434,23 +2741,8 @@ msgstr "Bitte überprüfen Sie die Netzwerkverbindung von Drucker und Studio." msgid "Connecting..." msgstr "Verbinden..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Leer" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Automatisch nachfüllen" - -msgid "AMS not connected" -msgstr "AMS nicht verbunden" +msgid "Auto-refill" +msgstr "Automatisches Nachfüllen" msgid "Load" msgstr "Laden" @@ -2458,31 +2750,143 @@ msgstr "Laden" msgid "Unload" msgstr "Entladen" -msgid "Ext Spool" -msgstr "Externe Spule" - -msgid "Tips" -msgstr "Tipps" - -msgid "Guide" -msgstr "Anleitung" - -msgid "Retry" -msgstr "Wiederholen" - -msgid "Calibrating AMS..." -msgstr "AMS kalibrieren..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"Während der Kalibrierung ist ein Problem aufgetreten. Klicken Sie hier, um " -"die Lösung zu sehen." +"Wählen Sie einen AMS-Steckplatz aus und drücken Sie dann die Schaltfläche " +"„Laden“ oder „Entladen“, um Filamente automatisch zu laden oder zu entladen." -msgid "Calibrate again" -msgstr "Erneut Kalibrieren" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" +"Der Filamenttyp ist unbekannt, der für diese Aktion erforderlich ist. Bitte " +"legen Sie die Informationen des Zielfilaments fest." -msgid "Cancel calibration" -msgstr "Kalibrierung abbrechen" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" +"Das Ändern der Lüftergeschwindigkeit während des Druckens kann die " +"Druckqualität beeinflussen. Bitte wählen Sie sorgfältig." + +msgid "Change Anyway" +msgstr "Trotzdem ändern" + +msgid "Off" +msgstr "Aus" + +msgid "Filter" +msgstr "Filter" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" +"Die Aktivierung der Filtration leitet den rechten Lüfter um, um Gas zu " +"filtern, was die Kühlleistung verringern kann." + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" +"Die Aktivierung der Filtration während des Druckens kann die Kühlung " +"verringern und die Druckqualität beeinträchtigen. Bitte wählen Sie sorgfältig" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" +"Das ausgewählte Material unterstützt nur den aktuellen Lüftermodus und kann " +"während des Druckens nicht geändert werden." + +msgid "Cooling" +msgstr "Kühlung" + +msgid "Heating" +msgstr "Heizung" + +msgid "Exhaust" +msgstr "Abluft" + +msgid "Full Cooling" +msgstr "Volle Kühlung" + +msgid "Init" +msgstr "Initialisierung" + +msgid "Chamber" +msgstr "Kammer" + +msgid "Innerloop" +msgstr "Innenkreislauf" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Oben" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" +"Der Lüfter steuert die Temperatur während des Druckens, um die Druckqualität " +"zu verbessern. Das System passt das Ein- und Ausschalten sowie die " +"Geschwindigkeit des Lüfters automatisch an verschiedene Druckmaterialien an." + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" +"Die Kühlmodus ist geeignet für den Druck von PLA/PETG/TPU-Materialien und " +"filtert die Kammerluft." + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" +"Der Heizmodus ist geeignet für den Druck von ABS/ASA/PC/PA-Materialien und " +"zirkuliert die Kammerluft." + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" +"Der starke Kühlmodus ist geeignet für den Druck von PLA/TPU-Materialien. In " +"diesem Modus werden die Drucke vollständig gekühlt." + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "Kühlmodus ist geeignet für den Druck von PLA/PETG/TPU-Materialien." + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "Rechts(Aux)" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "Rechts(Filter)" + +msgid "Hotend" +msgstr "Hotend" + +msgid "Parts" +msgstr "Teile" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "Düse1" + +msgid "MC Board" +msgstr "MC Board" + +msgid "Heat" +msgstr "Heizen" + +msgid "Fan" +msgstr "Lüfter" msgid "Idling..." msgstr "Pause..." @@ -2499,44 +2903,37 @@ msgstr "Ziehen Sie das aktuelle Filament zurück" msgid "Push new filament into extruder" msgstr "Neues Filament in den Extruder schieben" +msgid "Grab new filament" +msgstr "Neues Filament holen" + msgid "Purge old filament" msgstr "Altes Filament entfernen" -msgid "Feed Filament" -msgstr "Filament zuführen" - msgid "Confirm extruded" msgstr "Bestätigen es wurde extrudiert" msgid "Check filament location" msgstr "Überprüfen Sie das Filament" -msgid "Grab new filament" -msgstr "Neues Filament holen" +msgid "The maximum temperature cannot exceed " +msgstr "Die maximale Temperatur darf nicht überschritten werden " + +msgid "The minmum temperature should not be less than " +msgstr "Die minimale Temperatur sollte nicht weniger als " msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." -msgstr "" -"Wählen Sie einen AMS-Steckplatz aus und drücken Sie dann die Schaltfläche " -"„Laden“ oder „Entladen“, um Filamente automatisch zu laden oder zu entladen." - -msgid "Edit" -msgstr "Bearbeiten" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Alle ausgewählten Objekte befinden sich auf einer gesperrten Druckplatte.\n" "Die Objekte können nicht automatisch angeordnet werden." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Es sind keine anordnungsfähigen Objekte ausgewählt." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Diese Druckplatte ist gesperrt.\n" "Wir können diese Druckplatte nicht automatisch anordnen." @@ -2576,15 +2973,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Alle ausgewählten Objekte befinden sich auf einer gesperrten Druckplatte.\n" "Die Objekte können nicht automatisch ausgerichtet werden." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Diese Druckplatte ist gesperrt.\n" "Wir können diese Druckplatte nicht automatisch ausrichten." @@ -2640,7 +3037,7 @@ msgid "Cloud service connection failed. Please try again." msgstr "" "Die Verbindung zum Cloud-Dienst ist fehlgeschlagen. Bitte versuche es erneut." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Druckdatei nicht gefunden. Bitte erneut slicen" msgid "" @@ -2671,7 +3068,7 @@ msgstr "" "Die Größe der Druckdatei ist zu groß. Bitte passen Sie die Dateigröße an und " "versuchen Sie es erneut." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "Druckdatei nicht gefunden. Bitte erneut slicen und zum Drucken senden." msgid "" @@ -2707,21 +3104,73 @@ msgstr "Erfolgreich gesendet. Springt automatisch auf die Geräteseite in %ss" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Erfolgreich gesendet. Springt automatisch auf die nächste Seite in %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Vor dem Drucken über LAN muss eine MicroSD-Karte eingelegt werden." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Zugriffscode:%s IP-Adresse:%s" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" +"Ein Speicher muss vor dem Drucken über LAN eingelegt werden." + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" +"Druckauftrag wird über LAN gesendet, aber der Speicher im Drucker ist " +"fehlerhaft und Druckprobleme können dadurch verursacht werden." + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" +"Der Speicher im Drucker ist fehlerhaft. Bitte ersetzen Sie ihn durch einen " +"normalen Speicher, bevor Sie den Druckauftrag an den Drucker senden." + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" +"Der Speicher im Drucker ist schreibgeschützt. Bitte ersetzen Sie ihn durch " +"einen normalen Speicher, bevor Sie den Druckauftrag an den Drucker senden." + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" +"Es ist ein unbekannter Fehler mit dem Speicherstatus aufgetreten. Bitte " +"versuchen Sie es erneut." + +msgid "Sending G-code file over LAN" msgstr "Sende Gcode-Datei über LAN" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Sende Gcode-Datei an SDKarte" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Erfolgreich gesendet. Aktuelle Seite wird in %s s geschlossen" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Vor dem Senden an den Drucker muss eine SD-Karte eingelegt werden." +msgid "Storage needs to be inserted before sending to printer." +msgstr "Speicher muss vor dem Senden an den Drucker eingelegt werden." + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" +"Gcode-Datei wird über LAN gesendet, aber der Speicher im Drucker ist fehlerhaft " +"und Druckprobleme können dadurch verursacht werden." + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" +"Der Speicher im Drucker ist fehlerhaft. Bitte ersetzen Sie ihn durch einen " +"normalen Speicher, bevor Sie etwas an den Drucker senden." + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" +"Der Speicher im Drucker ist schreibgeschützt. Bitte ersetzen Sie ihn durch " +"einen normalen Speicher, bevor Sie etwas an den Drucker senden." msgid "Importing SLA archive" msgstr "SLA-Archiv importieren" @@ -2765,10 +3214,10 @@ msgstr "Herunterladen" msgid "Download failed" msgstr "Download fehlgeschlagen" -msgid "Cancelled" +msgid "Canceled" msgstr "Abgebrochen" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Erfolgreich installiert" msgid "Installing" @@ -2792,8 +3241,8 @@ msgstr "Snapmaker Orca ist lizenziert unter " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, Version 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca basiert auf PrusaSlicer und BambuStudio" msgid "Libraries" msgstr "Bibliotheken" @@ -2809,9 +3258,6 @@ msgstr "" msgid "About %s" msgstr "Über %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca basiert auf BambuStudio, PrusaSlicer und SuperSlicer." @@ -2840,9 +3286,6 @@ msgstr "Bestätigen" msgid "Close" msgstr "Schließen" -msgid "Colour" -msgstr "Farbe" - msgid "" "Nozzle\n" "Temperature" @@ -2861,11 +3304,6 @@ msgstr "Der Eingabewert sollte größer als %1% und kleiner als %2% sein" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"Das Einstellen von AMS-Slot-Informationen während des Drucks wird nicht " -"unterstützt." - msgid "Factors of Flow Dynamics Calibration" msgstr "Dynamische Flusskalibrierungsfaktoren" @@ -2878,6 +3316,11 @@ msgstr "Faktor K" msgid "Factor N" msgstr "Faktor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"Das Einstellen von AMS-Slot-Informationen während des Drucks wird nicht " +"unterstützt." + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "Das Einstellen von virtuellen Slot-Informationen während des Druckens wird " @@ -2898,6 +3341,18 @@ msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" "Bitte geben Sie einen gültigen Wert ein (K in %.1f~%.1f, N in %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" +"Der Düsenfluss ist nicht eingestellt. Bitte stellen Sie die Düsenflussrate " +"ein, bevor Sie das Filament bearbeiten.\n" +"'Gerät -> Druckteile'" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Andere Farbe" @@ -2932,15 +3387,9 @@ msgstr "Druckbetttemperatur" msgid "Max volumetric speed" msgstr "Maximale Volumengeschwindigkeit" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Druckbetttemperatur" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Kalibrierung starten" @@ -2983,14 +3432,96 @@ msgstr "Dynamische Flusskalibrierung" msgid "Step" msgstr "Schritt" +msgid "Unmapped" +msgstr "nicht zugeordnet" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" +"Obere Hälfte Bereich: Original\n" +"Untere Hälfte Bereich: Das Filament aus dem Originalprojekt wird verwendet, " +"wenn es nicht zugeordnet ist.\n" +"Und Sie können darauf klicken, um es zu ändern" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" +"Obere Hälfte Bereich: Original\n" +"Untere Hälfte Bereich: Filament im AMS\n" +"Und Sie können darauf klicken, um es zu ändern" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" +"Obere Hälfte Bereich: Original\n" +"Untere Hälfte Bereich: Filament im AMS\n" +"Und Sie können nicht darauf klicken, um es zu ändern" + msgid "AMS Slots" msgstr "AMS Slots" +msgid "Please select from the following filaments" +msgstr "Bitte wählen Sie aus den folgenden Filamenten" + +msgid "Select filament that installed to the left nozzle" +msgstr "wählen Sie das Filament aus, das in die linke Düse eingesetzt ist" + +msgid "Select filament that installed to the right nozzle" +msgstr "wählen Sie das Filament aus, das in die rechte Düse eingesetzt ist" + +msgid "Left AMS" +msgstr "Linker AMS-Slot" + +msgid "External" +msgstr "Extern" + +msgid "Reset current filament mapping" +msgstr "Aktuelle Filamentzuordnung zurücksetzen" + +msgid "Right AMS" +msgstr "Rechter AMS-Slot" + +msgid "Left Nozzle" +msgstr "Linke Düse" + +msgid "Right Nozzle" +msgstr "Rechte Düse" + +msgid "Nozzle" +msgstr "Düse" + +msgid "Ext" +msgstr "Ext" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." msgstr "" -"Hinweis: Es können nur die AMS-Slots ausgewählt werden, die mit demselben " -"Materialtyp geladen sind." +"Hinweis: Der Filamenttyp(%s) stimmt nicht mit dem Filamenttyp(%s) in der " +"Slicing-Datei überein. Wenn Sie diesen Slot verwenden möchten, können Sie %s " +"anstelle von %s installieren und die Slot-Informationen auf der Seite " +"'Gerät' ändern." + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" +"Hinweis: Der Slot ist leer oder undefiniert. Wenn Sie diesen Slot verwenden " +"möchten, können Sie %s installieren und die Slot-Informationen auf der Seite " +"'Gerät' ändern." + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "Hinweis: Es können nur mit Filament geladene Slots ausgewählt werden." msgid "Enable AMS" msgstr "AMS aktivieren" @@ -3004,13 +3535,10 @@ msgstr "AMS deaktivieren" msgid "Print with the filament mounted on the back of chassis" msgstr "Druck mit dem Filament auf der Rückseite des Chassis" -msgid "Current Cabin humidity" -msgstr "Aktuelle Kabinenfeuchtigkeit" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Wechseln Sie das Trockenmittel, wenn es zu feucht ist. Der Indikator kann " @@ -3019,7 +3547,7 @@ msgstr "" "Feuchtigkeit aufzunehmen, niedrige Temperaturen verlangsamen den Prozess." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Legen Sie fest, welcher AMS-Slot für das im Druckauftrag genutzte Filament " "verwendet werden soll." @@ -3040,12 +3568,21 @@ msgid "Print using materials mounted on the back of the case" msgstr "" "Drucken mit Materialien, die an der Rückseite des Gehäuses montiert sind" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Drucken mit Materialien im AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Drucken mit Filamenten, die an der Rückseite des Chassis montiert sind" +msgid "Auto Refill" +msgstr "Automatisch nachfüllen" + +msgid "Left" +msgstr "Links" + +msgid "Right" +msgstr "Rechts" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3053,9 +3590,19 @@ msgstr "" "Wenn das aktuelle Material leer ist, druckt der Drucker in folgender " "Reihenfolge weiter." +msgid "Identical filament: same brand, type and color" +msgstr "Identisches Filament: gleiche Marke, Typ und Farbe" + msgid "Group" msgstr "Gruppe" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" +"Wenn das aktuelle Material leer ist, verwendet der Drucker identisches " +"Filament um weiter zu drucken" + msgid "The printer does not currently support auto refill." msgstr "Der Drucker unterstützt derzeit kein automatisches Nachfüllen." @@ -3066,15 +3613,13 @@ msgstr "" "AMS-Einstellungen." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Wenn sich zwei identische Filamente im AMS befinden, wird das AMS-Filament-" -"Backup aktiviert. \n" -"(Derzeit wird die automatische Versorgung mit Verbrauchsmaterialien mit " -"derselben Marke, demselben Materialtyp und derselben Farbe unterstützt)" +"Wenn das aktuelle Filament leer ist, verwendet der Drucker identisches " +"Filament um weiter zu drucken.\n" +"*Identisches Filament: gleiche Marke, Typ und Farbe." msgid "DRY" msgstr "Trocken" @@ -3096,7 +3641,7 @@ msgstr "" "Lab Filament eingesetzt wird. Dies dauert etwa 20 Sekunden." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Hinweis: Wenn während des Drucks neues Filament eingelegt wird, liest das " @@ -3116,8 +3661,8 @@ msgstr "Update beim Einschalten" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "Das AMS liest beim Einschalten automatisch die Informationen über das " "eingelegte Filament. Der Lesevorgang dauert ca. 1 Minute und lässt die " @@ -3136,20 +3681,17 @@ msgid "Update remaining capacity" msgstr "Restkapazität aktualisieren" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"Das AMS schätzt die verbleibende Kapazität des Bambu-Filaments, nachdem die " -"Filamentinformationen aktualisiert wurden. Während des Drucks wird die " -"verbleibende Kapazität automatisch aktualisiert." +"AMS versucht, die verbleibende Kapazität der Bambu Lab Filamente zu schätzen." msgid "AMS filament backup" msgstr "AMS Filament Backup" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS wechselt automatisch zu einer anderen Spule mit denselben " "Filamenteigenschaften, wenn das aktuelle Filament leer ist." @@ -3208,10 +3750,14 @@ msgstr "" "Ein Fehler ist aufgetreten. Vielleicht reicht der Arbeitsspeicher des " "Systems nicht aus oder es handelt sich um einen Fehler im Programm." -msgid "Please save project and restart the program. " -msgstr "Bitte speichern Sie das Projekt und starten Sie das Programm neu. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Ein schwerwiegender Fehler ist aufgetreten: \"%1%\"" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Bitte speichern Sie das Projekt und starten Sie das Programm neu." + +msgid "Processing G-code from Previous file..." msgstr "Verarbeite G-Code der vorherigen Datei..." msgid "Slicing complete" @@ -3244,7 +3790,7 @@ msgstr "Ausführen von Nachbearbeitungsskripten" msgid "Successfully executed post-processing script" msgstr "Nachbearbeitungsskript erfolgreich ausgeführt" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Unbekannter Fehler beim Exportieren des G-Codes aufgetreten." #, boost-format @@ -3300,12 +3846,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "G-Code-Datei exportiert nach %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Unbekannter Fehler beim exportieren des G-Code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3322,229 +3868,6 @@ msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" "Planen des Uploads auf `%1%`. Siehe Fenster -> Host-Upload-Druckwarteschlange" -msgid "Device" -msgstr "Gerät" - -msgid "Task Sending" -msgstr "Aufgabe senden" - -msgid "Task Sent" -msgstr "Aufgabe gesendet" - -msgid "Edit multiple printers" -msgstr "Mehrere Drucker bearbeiten" - -msgid "Select connected printers (0/6)" -msgstr "Verbundene Drucker auswählen (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Verbundene Drucker auswählen (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" -"Die maximale Anzahl von Druckern, die ausgewählt werden können, beträgt %d" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "Keine Aufgabe" - -msgid "View" -msgstr "Ansicht" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "Drucker bearbeiten" - -msgid "Device Name" -msgstr "Gerätename" - -msgid "Task Name" -msgstr "Aufgabenname" - -msgid "Device Status" -msgstr "Gerätestatus" - -msgid "Actions" -msgstr "Aktionen" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Wählen Sie hier die Geräte aus, die Sie verwalten möchten (bis zu 6 Geräte)" - -msgid "Add" -msgstr "Hinzufügen" - -msgid "Idle" -msgstr "Inaktiv" - -msgid "Printing" -msgstr "Drucken" - -msgid "Upgrading" -msgstr "Aktualisieren" - -msgid "Incompatible" -msgstr "Inkompatibel" - -msgid "syncing" -msgstr "synchronisieren" - -msgid "Printing Finish" -msgstr "Druck beendet" - -msgid "Printing Failed" -msgstr "Druck fehlgeschlagen" - -msgid "Printing Pause" -msgstr "Druck pausiert" - -msgid "Prepare" -msgstr "Vorbereiten" - -msgid "Slicing" -msgstr "Slicen" - -msgid "Pending" -msgstr "Ausstehend" - -msgid "Sending" -msgstr "Sende" - -msgid "Sending Finish" -msgstr "Senden beendet" - -msgid "Sending Cancel" -msgstr "Senden abbrechen" - -msgid "Sending Failed" -msgstr "Senden fehlgeschlagen" - -msgid "Print Success" -msgstr "Druck erfolgreich" - -msgid "Print Failed" -msgstr "Druck fehlgeschlagen" - -msgid "Removed" -msgstr "Entfernt" - -msgid "Resume" -msgstr "Fortsetzen" - -msgid "Stop" -msgstr "Stop" - -msgid "Task Status" -msgstr "Aufgabenstatus" - -msgid "Sent Time" -msgstr "Sende Zeit" - -msgid "There are no tasks to be sent!" -msgstr "Es gibt keine Aufgaben, die gesendet werden sollen!" - -msgid "No historical tasks!" -msgstr "Keine historischen Aufgaben!" - -msgid "Loading..." -msgstr "Laden..." - -msgid "No AMS" -msgstr "Kein AMS" - -msgid "Send to Multi-device" -msgstr "An Multi-Gerät senden" - -msgid "Preparing print job" -msgstr "Druckauftrag vorbereiten" - -msgid "Abnormal print file data. Please slice again" -msgstr "Fehlerhafte Daten in der Druckdatei. Bitte slicen Sie erneut" - -msgid "There is no device available to send printing." -msgstr "Es ist kein Gerät verfügbar, um den Druck zu senden." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" -"Die Anzahl der gleichzeitig verwendeten Drucker darf nicht gleich 0 sein." - -msgid "Use External Spool" -msgstr "Externe Spule verwenden" - -msgid "Use AMS" -msgstr "AMS verwenden" - -msgid "Select Printers" -msgstr "Drucker auswählen" - -msgid "Ams Status" -msgstr "AMS-Status" - -msgid "Printing Options" -msgstr "Druckoptionen" - -msgid "Bed Leveling" -msgstr "Druckbettnivellierung" - -msgid "Timelapse" -msgstr "Zeitraffer" - -msgid "Flow Dynamic Calibration" -msgstr "Dynamische Flusskalibrierung" - -msgid "Send Options" -msgstr "Senden-Optionen" - -msgid "Send to" -msgstr "Senden an" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"Drucker gleichzeitig drucken.(Es hängt davon ab, wie viele Geräte " -"gleichzeitig erhitzt werden können.)" - -msgid "Wait" -msgstr "Warten" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"Minute pro Charge.(Es hängt davon ab, wie lange es dauert, die Erhitzung " -"abzuschließen.)" - -msgid "Send" -msgstr "Senden" - -msgid "Name is invalid;" -msgstr "Der Name ist ungültig;" - -msgid "illegal characters:" -msgstr "unzulässige Zeichen:" - -msgid "illegal suffix:" -msgstr "unzulässiger Zusatz:" - -msgid "The name is not allowed to be empty." -msgstr "Der Name darf nicht leer sein." - -msgid "The name is not allowed to start with space character." -msgstr "Der Name darf nicht mit einem Leerzeichen beginnen." - -msgid "The name is not allowed to end with space character." -msgstr "Der Name darf nicht mit einem Leerzeichen enden." - -msgid "The name length exceeds the limit." -msgstr "Die Namenslänge überschreitet das Limit." - msgid "Origin" msgstr "Nullpunkt" @@ -3621,12 +3944,13 @@ msgstr "" msgid "Bed Shape" msgstr "Druckbettform" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" -msgstr "" -"Die empfohlene Mindesttemperatur liegt unter 190 Grad oder die empfohlene " -"Maximaltemperatur liegt über 300 Grad.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "eine Mindesttemperatur über %d℃ wird für %s empfohlen.\n" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" +msgstr "eine Höchsttemperatur unter %d℃ wird für %s empfohlen.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3651,22 +3975,22 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"Die empfohlene Düsentemperatur für diesen Filamenttyp beträgt [%d, %d] °C" +"Die empfohlene Düsentemperatur für diesen Filamenttyp beträgt [%d, %d] °C." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Zu kleine maximale volumetrische Geschwindigkeit.\n" "Wert wurde auf 0,5 zurückgesetzt" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "Die aktuelle Kammer-Temperatur ist höher als die sichere Temperatur des " @@ -3675,14 +3999,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Zu geringe Schichthöhe.\n" "Auf 0,2 zurücksetzen" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Zu kleiner Ironing-Abstand.\n" "Auf 0,1 zurückgesetzt" @@ -3728,18 +4052,18 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" "Der alternative zusätzliche Wandmodus funktioniert nicht gut, wenn die " "vertikale Wanddicke auf Alle eingestellt ist." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" -"Diese Einstellungen automatisch ändern? \n" +"Diese Einstellungen automatisch ändern?\n" "Ja - Ändern Sie die vertikale Wanddicke auf Moderate und aktivieren Sie " "alternative zusätzliche Wand\n" "Nein - Verwenden Sie keine alternative zusätzliche Wand" @@ -3781,14 +4105,6 @@ msgstr "" "JA - Reinigungsturm beibehalten\n" "NEIN - unabhängige Stütz-Schichthöhen beibehalten" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Während des Druckens mit einem Objekt kann der Extruder auf den Rand " -"stoßen.\n" -"Daher sollten die Skirt-Ebenen zurückgesetzt werden." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." @@ -3796,38 +4112,65 @@ msgstr "" "seam_slope_start_height muss kleiner als layer_height sein.\n" "auf 0 gesetzt" +#, fuzzy, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" -"Der Spiralmodes funktioniert nur, wenn die Wand-Schleifen auf 1 gesetzt " -"sind,\n" -"die Unterstützung deaktiviert ist, die oberen Schalenlagen auf 0 gesetzt " -"sind, \n" -"die Dichte des dünnen Innenfülls auf 0 gesetzt ist und der Typ des " -"Zeitraffers auf \n" -"traditional steht." +"Die Verriegelungstiefe sollte kleiner als die Hauttiefe sein.\n" +"Auf 50 % der Hauttiefe zurücksetzen." + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Die Modi [Extrusion] und [Kombiniert] des Fuzzy Skin erfordern, dass der " +"Arachne Wall Generator aktiviert ist." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Diese Einstellungen automatisch ändern?\n" +"Ja - Arachne Wall Generator aktivieren\n" +"Nein - Arachne Wall Generator deaktivieren und den Modus [Verschiebung] des " +"Fuzzy Skin setzen" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." +msgstr "" +"Der Spiralmodus funktioniert nur, wenn die Wandschleifen 1 sind, die Stütze " +"deaktiviert ist, die Klumpenerkennung durch Abtasten deaktiviert ist, die " +"oberen Schichtlagen 0 sind, die Dichte der spärlichen Füllung 0 ist und der " +"Zeitraffertyp traditionell ist." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Maschinen mit I3-Struktur erzeugen jedoch keine Zeitraffer-Videos." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Diese Einstellungen automatisch ändern? \n" +"Diese Einstellungen automatisch ändern?\n" "Ja - Diese Einstellungen ändern und den Spiralmodus automatisch aktivieren\n" "Nein - Spiralmodus nicht aktivieren" +msgid "Printing" +msgstr "Drucken" + msgid "Auto bed leveling" msgstr "Automatische Druckbettnivellierung" msgid "Heatbed preheating" msgstr "Heizbett vorheizen" -msgid "Sweeping XY mech mode" -msgstr "Frequenzmessung der XY-Mechanik" +msgid "Vibration compensation" +msgstr "Vibrationskompensation" msgid "Changing filament" msgstr "Filament wechseln" @@ -3835,14 +4178,14 @@ msgstr "Filament wechseln" msgid "M400 pause" msgstr "M400 Pause" -msgid "Paused due to filament runout" -msgstr "Pausiert aufgrund leerem Filaments" +msgid "Paused (filament ran out)" +msgstr "Pausiert (Filament leer)" -msgid "Heating hotend" -msgstr "Heizen des Hotend" +msgid "Heating nozzle" +msgstr "Düse wird erhitzt" -msgid "Calibrating extrusion" -msgstr "Kalibrierung der Extrusion" +msgid "Calibrating dynamic flow" +msgstr "Kalibrierung des dynamischen Flusses" msgid "Scanning bed surface" msgstr "Scan der Druckbettoberfläche" @@ -3865,79 +4208,138 @@ msgstr "Reinigen der Düse" msgid "Checking extruder temperature" msgstr "Überprüfen der Extruder Temperatur" -msgid "Printing was paused by the user" -msgstr "Der Druckvorgang wurde vom Benutzer angehalten" +msgid "Paused by the user" +msgstr "Vom Benutzer pausiert" -msgid "Pause of front cover falling" -msgstr "Pause, da die Abdeckung des Werkzeugkopfes abgefallen ist" +msgid "Pause (front cover fall off)" +msgstr "Pause (Frontabdeckung abgefallen)" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Kalibrierung des Mikro-Lidars" -msgid "Calibrating extrusion flow" -msgstr "Kalibrieren des Materialflusses" +msgid "Calibrating flow ratio" +msgstr "Kalibrierung des Flussverhältnisses" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pausiert aufgrund einer Fehlfunktion der Düsentemperatur" +msgid "Pause (nozzle temperature malfunction)" +msgstr "Pause (Düsentemperaturstörung)" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pausiert aufgrund einer Fehlfunktion der Heizbetttemperatur" +msgid "Pause (heatbed temperature malfunction)" +msgstr "Pause (Heizbetttemperaturstörung)" msgid "Filament unloading" msgstr "Entladen des Filaments" -msgid "Skip step pause" -msgstr "Überspringen der Pause" +msgid "Pause (step loss)" +msgstr "Pause (Schrittverlust)" msgid "Filament loading" msgstr "Laden des Filaments" -msgid "Motor noise calibration" -msgstr "Motorgeräuschkalibrierung" +msgid "Motor noise cancellation" +msgstr "Motorgeräuschunterdrückung" -msgid "Paused due to AMS lost" -msgstr "Pausiert aufgrund eines AMS-Verlustes" +msgid "Pause (AMS offline)" +msgstr "Pause (AMS nicht erreichbar)" -msgid "Paused due to low speed of the heat break fan" -msgstr "" -"Pausiert aufgrund einer zu niedrigen Geschwindigkeit des Heatbreak-Lüfters" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "Pause (zu kleine Geschwindigkeit des Heatbreak-Lüfters)" -msgid "Paused due to chamber temperature control error" -msgstr "Pausiert aufgrund eines Fehlers bei der Kammer-Temperaturregelung" +msgid "Pause (chamber temperature control problem)" +msgstr "Pause (Kammertemperaturregelungsproblem)" msgid "Cooling chamber" msgstr "Kühlung der Kammer" -msgid "Paused by the Gcode inserted by user" -msgstr "Pausiert durch den vom Benutzer eingefügten G-Code" +msgid "Pause (G-code inserted by user)" +msgstr "Pause (vom Benutzer eingefügter G-Code)" msgid "Motor noise showoff" msgstr "Motorgeräusch-Showoff" -msgid "Nozzle filament covered detected pause" -msgstr "Pause bei Erkennung von der Düsenfilamentabdeckung" +msgid "Pause (nozzle clumping)" +msgstr "Pause (Düsenverklumpung)" -msgid "Cutter error pause" -msgstr "Pause bei Cutter-Fehler" +msgid "Pause (cutter error)" +msgstr "Pause (Schneidfehler)" -msgid "First layer error pause" -msgstr "Pause bei Fehler der ersten Schicht" +msgid "Pause (first layer error)" +msgstr "Pause (Fehler in der ersten Schicht)" -msgid "Nozzle clog pause" -msgstr "Pause bei Düsenverstopfung" +msgid "Pause (nozzle clog)" +msgstr "Pause (Düsenverstopfung)" + +msgid "Measuring motion precision" +msgstr "Messung der Bewegungspräzision" + +msgid "Enhancing motion precision" +msgstr "Verbesserung der Bewegungspräzision" + +msgid "Measure motion accuracy" +msgstr "Messung der Bewegungsgenauigkeit" + +msgid "Nozzle offset calibration" +msgstr "Kalibrierung des Düsenversatzes" + +msgid "high temperature auto bed leveling" +msgstr "Automatische Druckbettnivellierung bei hoher Temperatur" + +msgid "Auto Check: Quick Release Lever" +msgstr "Automatische Überprüfung: Schnellspannhebel" + +msgid "Auto Check: Door and Upper Cover" +msgstr "Automatische Überprüfung: Tür und obere Abdeckung" + +msgid "Laser Calibration" +msgstr "Laser Kalibrierung" + +msgid "Auto Check: Platform" +msgstr "Automatische Überprüfung: Plattform" + +msgid "Confirming BirdsEye Camera location" +msgstr "Bestätigung des BirdsEye-Kamerastandorts" + +msgid "Calibrating BirdsEye Camera" +msgstr "Kalibrierung der BirdsEye-Kamera" + +msgid "Auto bed leveling -phase 1" +msgstr "Automatische Druckbettnivellierung - Phase 1" + +msgid "Auto bed leveling -phase 2" +msgstr "Automatische Druckbettnivellierung - Phase 2" + +msgid "Heating chamber" +msgstr "Kammer wird erhitzt" + +msgid "Cooling heatbed" +msgstr "Heizbett wird gekühlt" + +msgid "Printing calibration lines" +msgstr "Drucke Kalibrierungslinien" + +msgid "Auto Check: Material" +msgstr "Automatische Überprüfung: Material" + +msgid "Live View Camera Calibration" +msgstr "Kalibrierung der Live-View-Kamera" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "Warten darauf, dass das Heizbett die Zieltemperatur erreicht" + +msgid "Auto Check: Material Position" +msgstr "Automatische Überprüfung: Materialposition" + +msgid "Cutting Module Offset Calibration" +msgstr "Kalibrierung des Schneidmodulversatzes" + +msgid "Measuring Surface" +msgstr "Oberfläche wird vermessen" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "Thermische Vorkonditionierung zur Optimierung der ersten Schicht" msgid "Unknown" msgstr "Unbekannt" -msgid "Fatal" -msgstr "Fatal" - -msgid "Serious" -msgstr "Ernst" - -msgid "Common" -msgstr "Parameter" - msgid "Update successful." msgstr "Update erfolgreich." @@ -3950,34 +4352,74 @@ msgstr "Authentifizierung fehlgeschlagen." msgid "Update failed." msgstr "Update fehlgeschlagen." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "Zeitraffer wird auf diesem Drucker nicht unterstützt." + +msgid "Timelapse is not supported while the storage does not exist." msgstr "" -"Die aktuelle Kammer-Temperatur oder die Ziel-Kammer-Temperatur überschreitet " -"45℃. Um ein Verstopfen des Extruders zu vermeiden, ist es nicht erlaubt, " -"Filament mit niedriger Temperatur (PLA/PETG/TPU) zu laden." +"Zeitraffer wird nicht unterstützt, wenn der Speicher nicht vorhanden ist." + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" +"Zeitraffer wird nicht unterstützt, wenn der Speicher nicht verfügbar ist." + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" +"Zeitraffer wird nicht unterstützt, wenn der Speicher schreibgeschützt ist." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." msgstr "" -"Filament mit niedriger Temperatur (PLA/PETG/TPU) ist im Extruder geladen. Um " -"ein Verstopfen des Extruders zu vermeiden, ist es nicht erlaubt, die " -"Kammertemperatur über 45℃ einzustellen." +"Um Ihre Sicherheit zu gewährleisten, können bestimmte Verarbeitungsvorgänge " +"(z. B. Laser) nur am Drucker fortgesetzt werden." + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" +"Die Kammertemperatur ist zu hoch, was dazu führen kann, dass das Filament " +"erweicht. Bitte warten Sie, bis die Kammertemperatur unter %d℃ sinkt. Sie " +"können die Vorderseite öffnen oder Lüfter einschalten, um die Kammer zu " +"kühlen." + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" +"Die AMS-Temperatur ist zu hoch, was dazu führen kann, dass das Filament " +"erweicht. Bitte warten Sie, bis die AMS-Temperatur unter %d℃ sinkt." + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" +"Die aktuelle Kammertemperatur oder die Ziel-Kammertemperatur überschreitet " +"45℃. Um eine Verstopfung des Extruders zu vermeiden, darf kein " +"Niedrigtemperaturfilament (PLA/PETG/TPU) geladen werden." + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" +"Im Extruder ist Niedrigtemperaturfilament (PLA/PETG/TPU) geladen. Um eine " +"Verstopfung des Extruders zu vermeiden, darf die Kammertemperatur nicht " +"eingestellt werden." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Wenn Sie die Kammertemperatur unter 40℃ einstellen, wird die " "Kammertemperaturregelung nicht aktiviert. Die Ziel-Kammertemperatur wird " "automatisch auf 0℃ eingestellt." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Druckauftrag konnte nicht gestartet werden" msgid "" @@ -3992,31 +4434,77 @@ msgid "Selected diameter and machine diameter do not match" msgstr "" "Ausgewählter Durchmesser und Maschinendurchmesser stimmen nicht überein" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Fehler beim Generieren des Kalibrierungs-G-Codes" msgid "Calibration error" msgstr "Kalibrierungsfehler" -msgid "TPU is not supported by AMS." -msgstr "TPU wird von AMS nicht unterstützt." +msgid "Resume Printing" +msgstr "Druck fortsetzen" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF wird von AMS nicht unterstützt." +msgid "Resume (defects acceptable)" +msgstr "Weiterdrucken (Mängel akzeptabel)" -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "" -"Feuchtes PVA wird flexibel und bleibt im AMS stecken, bitte trocknen Sie es " -"vor dem Gebrauch." +msgid "Resume (problem solved)" +msgstr "Weiterdrucken (Problem behoben)" -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "" -"CF/GF-Filamente sind hart und spröde. Sie brechen leicht oder bleiben im AMS " -"stecken. Bitte verwenden Sie sie mit Vorsicht." +msgid "Stop Printing" +msgstr "Druck abbrechen" + +msgid "Check Assistant" +msgstr "Assistent überprüfen" + +msgid "Filament Extruded, Continue" +msgstr "Filament extrudiert, fortsetzen" + +msgid "Not Extruded Yet, Retry" +msgstr "Noch nicht extrudiert, erneut versuchen" + +msgid "Finished, Continue" +msgstr "Fertig, fortsetzen" + +msgid "Load Filament" +msgstr "Laden" + +msgid "Filament Loaded, Resume" +msgstr "Filament geladen, fortsetzen" + +msgid "View Liveview" +msgstr "Live-Ansicht anzeigen" + +msgid "No Reminder Next Time" +msgstr "Keine Erinnerung beim nächsten Mal" + +msgid "Ignore. Don't Remind Next Time" +msgstr "Ignorieren. Nächstes Mal nicht erinnern" + +msgid "Ignore this and Resume" +msgstr "Ignorieren und fortsetzen" + +msgid "Problem Solved and Resume" +msgstr "Problem behoben und fortsetzen" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "Verstanden, Feueralarm ausschalten." + +msgid "Retry (problem solved)" +msgstr "Erneut versuchen (Problem behoben)" + +msgid "Stop Drying" +msgstr "Trocknen stoppen" + +msgid "Done" +msgstr "Erledigt" + +msgid "Retry" +msgstr "Wiederholen" + +msgid "Resume" +msgstr "Fortsetzen" + +msgid "Unknown error." +msgstr "Unbekannter Fehler." msgid "default" msgstr "Standard" @@ -4030,7 +4518,7 @@ msgstr "" "Eingebaute Platzhalter (Doppelklicken Sie auf ein Element, um es zum G-Code " "hinzuzufügen)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "G-Code-Platzhalter suchen" msgid "Add selected placeholder to G-code" @@ -4089,7 +4577,7 @@ msgid "parameter name" msgstr "Parametername" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s kann nicht Prozent sein" #, c-format, boost-format @@ -4132,10 +4620,29 @@ msgstr "Der Eingabewert ist nicht im gültigen Bereich" msgid "Some extension in the input is invalid" msgstr "Erweiterung in der Eingabe ist ungültig" +msgid "This parameter expects a valid template." +msgstr "Dieser Parameter erwartet eine gültige Vorlage." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" +"Ungültiges Muster. Verwenden Sie N, N#K oder eine durch Kommas getrennte " +"Liste mit optionalem #K pro Eintrag. Beispiele: 5, 5#2, 1,7,9, 5,9#2,18." + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Ungültiges Format. Erwartetes Vektorformat: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "Wähle" + +msgid "Summary" +msgstr "Zusammenfassung" + msgid "Layer Height" msgstr "Schichthöhe" @@ -4145,9 +4652,6 @@ msgstr "Linienbreite" msgid "Fan Speed" msgstr "Lüftergeschwindigkeit" -msgid "Temperature" -msgstr "Temperatur" - msgid "Flow" msgstr "Fluss" @@ -4181,7 +4685,7 @@ msgstr "Lüftergeschwindigkeit: " msgid "Temperature: " msgstr "Temperatur: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Laden von G-Codes" msgid "Generating geometry vertex data" @@ -4214,6 +4718,86 @@ msgstr "Gesamtdauer" msgid "Total cost" msgstr "Geamtkosten" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" +"Automatisches Neuschneiden entsprechend der optimalen Filamentgruppierung, " +"und die Gruppierungsergebnisse werden nach dem Schneiden angezeigt." + +msgid "Filament Grouping" +msgstr "Filamentgruppierung" + +msgid "Why this grouping" +msgstr "Warum diese Gruppierung" + +msgid "Left nozzle" +msgstr "Linke Düse" + +msgid "Right nozzle" +msgstr "Rechte Düse" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "Bitte platzieren Sie die Filamente auf dem Drucker basierend auf dem " + +msgid "Tips:" +msgstr "Tipps:" + +msgid "Current grouping of slice result is not optimal." +msgstr "Die aktuelle Gruppierung des Slicergebnisses ist nicht optimal." + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" +"Erhöhe %1%g Filament und %2% Änderungen im Vergleich zur optimalen " +"Gruppierung." + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" +"Erhöhe %1%g Filament und sparen %2% Änderungen im Vergleich zur optimalen " +"Gruppierung." + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" +"Spare %1%g Filament und erhöhen %2% Änderungen im Vergleich zur optimalen " +"Gruppierung." + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" +"Spare %1%g Filament und %2% Änderungen im Vergleich zu einem Drucker mit " +"einer Düse." + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" +"Spare %1%g Filament und erhöhe %2% Änderungen im Vergleich zu einem Drucker " +"mit einer Düse." + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" +"Erhöhe %1%g Filament und spare %2% Änderungen im Vergleich zu einem Drucker " +"mit einer Düse." + +msgid "Set to Optimal" +msgstr "Auf optimal setzen" + +msgid "Regroup filament" +msgstr "Filament neu gruppieren" + +msgid "Tips" +msgstr "Tipps" + msgid "up to" msgstr "bis zu" @@ -4223,17 +4807,11 @@ msgstr "über" msgid "from" msgstr "von" -msgid "Color Scheme" -msgstr "Farbschema" - msgid "Time" msgstr "Zeit" -msgid "Percent" -msgstr "Prozent" - -msgid "Used filament" -msgstr "Genutztes Filament" +msgid "Usage" +msgstr "Nutzung" msgid "Layer Height (mm)" msgstr "Schichthöhe (mm)" @@ -4280,12 +4858,12 @@ msgstr "Bewegung" msgid "Extruder" msgstr "Extruder" -msgid "Filament change times" -msgstr "Filamentwechselzeiten" - msgid "Cost" msgstr "Kosten" +msgid "Filament change times" +msgstr "Filamentwechselzeiten" + msgid "Color change" msgstr "Farbwechsel" @@ -4295,10 +4873,7 @@ msgstr "aktuelle Platte drucken" msgid "Printer" msgstr "Drucker" -msgid "Custom g-code" -msgstr "Benutzerdefinierter G-Code" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Werkzeugwechsel" msgid "Time Estimation" @@ -4325,6 +4900,28 @@ msgstr "Zum Leisemodus wechseln" msgid "Switch to normal mode" msgstr "Zum normalen Modus wechseln" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" +"Ein Objekt befindet sich im Bereich nur für die linke/rechte Düse oder " +"überschreitet die druckbare Höhe der linken Düse.\n" +"Bitte stellen Sie sicher, dass die von diesem Objekt verwendeten Filamente " +"nicht auf andere Düsen angeordnet sind." + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"Ein Objekt liegt über die Begrenzung der Druckplatte oder überschreitet die " +"Höhenbeschränkung.\n" +"Bitte lösen Sie das Problem, indem Sie es vollständig auf oder von der " +"Druckplatte verschieben und bestätigen, dass die Höhe innerhalb des " +"Bauvolumens liegt." + msgid "Variable layer height" msgstr "Variable Schichthöhe" @@ -4343,27 +4940,15 @@ msgstr "Radius" msgid "Keep min" msgstr "Minimum beibehalten" -msgid "Left mouse button:" -msgstr "Linke Maustaste:" - msgid "Add detail" msgstr "Detail hinzufügen" -msgid "Right mouse button:" -msgstr "Rechte Maustaste:" - msgid "Remove detail" msgstr "Detail entfernen" -msgid "Shift + Left mouse button:" -msgstr "Gross + linke Maustaste:" - msgid "Reset to base" msgstr "Auf Ausgangsposition zurücksetzen" -msgid "Shift + Right mouse button:" -msgstr "Gross + rechte Maustaste:" - msgid "Smoothing" msgstr "Glättung" @@ -4376,6 +4961,66 @@ msgstr "Bearbeitungsbereich vergrößern/verkleinern" msgid "Sequence" msgstr "Reihenfolge" +msgid "object selection" +msgstr "Objektauswahl" + +msgid "part selection" +msgstr "Teileauswahl" + +msgid "number keys" +msgstr "Nummerntasten" + +msgid "number keys can quickly change the color of objects" +msgstr "Nummerntasten können schnell die Farbe von Objekten ändern." + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" +"Die folgenden Objekte liegen über die Begrenzung der Druckplatte oder " +"überschreiten die Höhenbeschränkung:\n" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" +"Bitte lösen Sie das Problem, indem Sie es vollständig auf oder von der " +"Druckplatte verschieben und bestätigen, dass die Höhe innerhalb des " +"Bauvolumens liegt.\n" + +msgid "left nozzle" +msgstr "linke Düse" + +msgid "right nozzle" +msgstr "rechte Düse" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" +"Die Position oder Größe einiger Modelle überschreitet den %s druckbaren " +"Bereich " + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" +"Die Position oder Größe des Modells %s überschreitet den %s druckbaren " +"Bereich." + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" +" Bitte überprüfen und passen Sie die Position oder Größe des Teils an, um in " +"den druckbaren Bereich zu passen:\n" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "linke Düse: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "rechte Düse: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" + msgid "Mirror Object" msgstr "Objekt spiegeln" @@ -4421,11 +5066,25 @@ msgstr "Vermeiden Sie den Bereich der Extrusionskalibrierung" msgid "Align to Y axis" msgstr "An Y-Achse ausrichten" +msgctxt "Camera" +msgid "Left" +msgstr "links" + +msgctxt "Camera" +msgid "Right" +msgstr "rechts" + +msgid "Add" +msgstr "Hinzufügen" + msgid "Add plate" msgstr "Druckplatte hinzufügen" -msgid "Auto orient" -msgstr "Automatische Ausrichtung" +msgid "Auto orient all/selected objects" +msgstr "Alle/ausgewählte Objekte automatische Ausrichtung" + +msgid "Auto orient all objects on current plate" +msgstr "Alle Objekte auf der aktuellen Druckplatte automatische Ausrichtung" msgid "Arrange all objects" msgstr "Alle Objekte anordnen" @@ -4445,12 +5104,30 @@ msgstr "Montageansicht" msgid "Select Plate" msgstr "Druckplatte wählen" +msgid "Slicing" +msgstr "Slicen" + +msgid "Slice all" +msgstr "Alle Platten slicen" + +msgid "Failed" +msgstr "Fehlgeschlagen" + +msgid "All Plates" +msgstr "alle Druckplatten" + +msgid "Stats" +msgstr "Statistiken" + msgid "Assembly Return" msgstr "Zurücksetzen der Montage" -msgid "return" +msgid "Return" msgstr "Zurück" +msgid "Toggle Axis" +msgstr "Achse umschalten" + msgid "Paint Toolbar" msgstr "Malwerkzeuge" @@ -4463,6 +5140,9 @@ msgstr "Schnittansicht" msgid "Assemble Control" msgstr "Montagekontrolle" +msgid "Selection Mode" +msgstr "Auswahlmodus" + msgid "Total Volume:" msgstr "Gesamtvolumen:" @@ -4477,34 +5157,83 @@ msgstr "Größe:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Konflikte von G-Code-Pfaden wurden bei Layer %d, z = %.2lf mm gefunden.Bitte " +"Konflikte von G-Code-Pfaden wurden bei Layer %d, Z = %.2lf mm gefunden.Bitte " "trennen Sie die konfliktbehafteten Objekte weiter voneinander (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Ein Objekt ragt über die Begrenzung der Druckplatte." msgid "A G-code path goes beyond the max print height." msgstr "Ein G-Code-Pfad überschreitet die maximale Druckhöhe." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Ein G-Code-Pfad geht über die Begrenzung der Druckplatte hinaus." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "Drucken von 2 oder mehr TPU-Filamenten wird nicht unterstützt." + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" +"Filament %s ist im %s platziert, aber der generierte G-Code-Pfad " +"überschreitet den druckbaren Bereich des %s." + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" +"Filamente %s sind im %s platziert, aber der generierte G-Code-Pfad " +"überschreitet den druckbaren Bereich des %s." + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" +"Filament %s ist im %s platziert, aber der generierte G-Code-Pfad " +"überschreitet die druckbare Höhe des %s." + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" +"Filamente %s sind im %s platziert, aber der generierte G-Code-Pfad " +"überschreitet die druckbare Höhe des %s." + +msgid "Open wiki for more information." +msgstr "Öffnen Sie das Wiki für weitere Informationen." + +msgid "Only the object being edited is visible." msgstr "Nur das bearbeitete Modell ist sichtbar." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." msgstr "" -"Ein Objekt wurde über die Begrenzung der Druckplatte gelegt oder " -"überschreitet die Höhengrenze.\n" -"Lösen Sie das Problem, indem Sie das Objekt vollständig auf die Druckplatte " -"oder von der Druckplatte wegbewegen und stellen Sie sicher, dass die Höhe " -"innerhalb des Bauvolumens liegt." +"Filament %s kann nicht direkt auf der Oberfläche dieser Druckplatte gedruckt " +"werden." + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" +"PLA- und PETG-Filamente wurden in der Mischung erkannt. Passen Sie die " +"Parameter gemäß dem Wiki an, um die Druckqualität zu gewährleisten." + +msgid "The prime tower extends beyond the plate boundary." +msgstr "Der Prime-Turm ragt über die Begrenzung der Druckplatte hinaus." + +msgid "Click Wiki for help." +msgstr "Klicken Sie auf Wiki für Hilfe." + +msgid "Click here to regroup" +msgstr "Klicken Sie hier, um neu zu gruppieren" msgid "Calibration step selection" msgstr "Auswahl des Kalibrierungsschritts" @@ -4515,11 +5244,8 @@ msgstr "Mikro-Lidar Kalibrierung" msgid "Bed leveling" msgstr "Druckbettnivellierung" -msgid "Vibration compensation" -msgstr "Vibrationskompensation" - -msgid "Motor noise cancellation" -msgstr "Motorgeräuschunterdrückung" +msgid "High-temperature Heatbed Calibration" +msgstr "Kalibrierung des Hochtemperatur-Heizbetts" msgid "Calibration program" msgstr "Kalibrierungsprogramm" @@ -4571,24 +5297,26 @@ msgstr "Benutzerdefinierte Kameraquelle" msgid "Show \"Live Video\" guide page." msgstr "Anleitungsseite „Live-Video“ anzeigen." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Drucker anschließen (LAN)" msgid "Please input the printer access code:" msgstr "Bitte geben Sie den Zugangscode zum Drucker ein:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Sie finden ihn unter \"Einstellungen > Netzwerk > Verbindungscode\".\n" -"auf dem Drucker, wie in der Abbildung gezeigt:" +"Sie finden es unter „Einstellungen > Netzwerk > Zugangscode\"\n" +"am Drucker, wie in der Abbildung gezeigt:" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" +"on the printer, as shown in the figure:" +msgstr "" +"Sie finden es unter „Einstellungen > Einstellungen > Nur LAN > Zugangscode" +"\"\n" +"am Drucker, wie in der Abbildung gezeigt:" msgid "Invalid input." msgstr "Ungültige Eingabe" @@ -4609,9 +5337,15 @@ msgstr "" msgid "Logging" msgstr "Protokollierung" +msgid "Prepare" +msgstr "Vorbereiten" + msgid "Preview" msgstr "Vorschau" +msgid "Device" +msgstr "Gerät" + msgid "Multi-device" msgstr "Multi-Gerät" @@ -4635,12 +5369,12 @@ msgstr "Aktuelle Platte slicen" msgid "Print plate" msgstr "Aktuelle Platte drucken" -msgid "Slice all" -msgstr "Alle Platten slicen" - msgid "Export G-code file" msgstr "G-Code als Datei exportieren" +msgid "Send" +msgstr "Senden" + msgid "Export plate sliced file" msgstr "Exportiere aktuelle Platte als STL Datei" @@ -4653,6 +5387,9 @@ msgstr "Alle Platten drucken" msgid "Send all" msgstr "Sende alle" +msgid "Send to Multi-device" +msgstr "An Multi-Gerät senden" + msgid "Keyboard Shortcuts" msgstr "Tastaturkürzel" @@ -4687,10 +5424,6 @@ msgstr "Modelle herunterladen" msgid "Default View" msgstr "Standardansicht" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Oben" - msgid "Top View" msgstr "Ansicht von oben" @@ -4713,15 +5446,9 @@ msgstr "Hinten" msgid "Rear View" msgstr "Ansicht von Hinten" -msgid "Left" -msgstr "Links" - msgid "Left View" msgstr "Anicht von Links" -msgid "Right" -msgstr "Rechts" - msgid "Right View" msgstr "Ansicht von rechts" @@ -4737,8 +5464,8 @@ msgstr "Ein neues Projekt beginnen" msgid "Open a project file" msgstr "Projektdatei öffnen" -msgid "Recent projects" -msgstr "Letzte Projekte" +msgid "Recent files" +msgstr "Zuletzt verwendete Dateien" msgid "Save Project" msgstr "Projekt speichern" @@ -4749,9 +5476,6 @@ msgstr "Aktuelles Projekt in Datei speichern" msgid "Save Project as" msgstr "Projekt speichern als" -msgid "Shift+" -msgstr "Umschalt+" - msgid "Save current project as" msgstr "Aktuelles Projekt speichern als" @@ -4785,8 +5509,8 @@ msgstr "Exportiere alle Objekte als STLs" msgid "Export Generic 3MF" msgstr "Generisches 3MF exportieren" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exportieren einer 3mf-Datei ohne Verwendung von 3mf-Erweiterungen" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exportieren einer 3MF-Datei ohne Verwendung von 3mf-Erweiterungen." msgid "Export current sliced file" msgstr "Aktuelle Slice-Datei exportieren" @@ -4800,6 +5524,9 @@ msgstr "Exportiere G-Code" msgid "Export current plate as G-code" msgstr "Aktuelle Druckplatte als G-Code exportieren" +msgid "Export toolpaths as OBJ" +msgstr "Werkzeugweg als OBJ exportieren" + msgid "Export Preset Bundle" msgstr "Preset-Bundle exportieren" @@ -4851,6 +5578,12 @@ msgstr "Auswahl duplizieren" msgid "Clone copies of selections" msgstr "Ausgewählte Kopien duplizieren" +msgid "Duplicate Current Plate" +msgstr "Aktuelle Druckplatte duplizieren" + +msgid "Duplicate the current plate" +msgstr "Dupliziert die aktuelle Druckplatte" + msgid "Select all" msgstr "Alles auswählen" @@ -4869,17 +5602,27 @@ msgstr "Perspektivische Ansicht verwenden" msgid "Use Orthogonal View" msgstr "Orthogonale Ansicht verwenden" +msgid "Auto Perspective" +msgstr "Automatische Perspektive" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Wechselt automatisch zwischen orthografischer und perspektivischer Ansicht, " +"wenn von der Top-/Bottom-/Seitenansicht gewechselt wird." + msgid "Show &G-code Window" msgstr "&G-Code-Fenster anzeigen" -msgid "Show g-code window in Previce scene" -msgstr "G-Code-Fenster in der Vorschau anzeigen" +msgid "Show G-code window in Preview scene." +msgstr "G-Code-Fenster in der Vorschau anzeigen." msgid "Show 3D Navigator" msgstr "3D-Navigator anzeigen" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "3D-Navigator in Vorbereitungs- und Vorschauansicht anzeigen" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "3D-Navigator in Vorbereitungs- und Vorschauansicht anzeigen." msgid "Reset Window Layout" msgstr "Window-Layout zurücksetzen" @@ -4890,18 +5633,27 @@ msgstr "Reset auf Standard-Layout" msgid "Show &Labels" msgstr "&Bezeichnung anzeigen" -msgid "Show object labels in 3D scene" -msgstr "Objektbeschriftungen in 3D-Szene anzeigen" +msgid "Show object labels in 3D scene." +msgstr "Objektbeschriftungen in 3D-Szene anzeigen." msgid "Show &Overhang" msgstr "Zeige Überhang" -msgid "Show object overhang highlight in 3D scene" -msgstr "Hervorhebung des Objektüberhangs in einer 3D-Szene anzeigen" +msgid "Show object overhang highlight in 3D scene." +msgstr "Hervorhebung des Objektüberhangs in einer 3D-Szene anzeigen." + +msgid "Show Selected Outline (beta)" +msgstr "Ausgewählte Kontur anzeigen (Experimentell)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Kontur um das ausgewählte Objekt in der 3D-Szene anzeigen." msgid "Preferences" msgstr "Einstellungen" +msgid "View" +msgstr "Ansicht" + msgid "Help" msgstr "Hilfe" @@ -4920,36 +5672,54 @@ msgstr "Durchgang 2" msgid "Flow rate test - Pass 2" msgstr "Durchflussratentests - Teil 1" +msgid "YOLO (Recommended)" +msgstr "YOLO (Empfohlen)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO Durchflusskalibrierung, 0.01 Schritt" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (Perfektionisten-Version)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO Durchflusskalibrierung, 0.005 Schritt" + msgid "Flow rate" msgstr "Durchflussrate" msgid "Pressure advance" -msgstr "Pressure advance" +msgstr "Pression Advance" msgid "Retraction test" msgstr "Rückzugslängen Test" -msgid "Orca Tolerance Test" -msgstr "Orca Toleranz Test" - msgid "Max flowrate" msgstr "Maximale Durchflussrate" +msgid "Cornering" +msgstr "Eckenausgleich" + +msgid "Cornering calibration" +msgstr "Eckenausgleich Kalibrierung" + +msgid "Input Shaping Frequency" +msgstr "Input Shaping Frequenz" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Input Shaping Dämpfung/Zeta-Faktor" + +msgid "Input Shaping" +msgstr "Input Shaping" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Mehr..." - msgid "Tutorial" msgstr "Anleitung" msgid "Calibration help" msgstr "Kalibrierungshilfe" -msgid "More calibrations" -msgstr "Weitere Kalibrierungen" - msgid "&Open G-code" msgstr "&Öffne G-Code" @@ -4965,9 +5735,6 @@ msgstr "Druckplatte neu von der Festplatte laden" msgid "Export &Toolpaths as OBJ" msgstr "Werkzeugwege als OBJ exportieren" -msgid "Export toolpaths as OBJ" -msgstr "Werkzeugweg als OBJ exportieren" - msgid "Open &Slicer" msgstr "Öffne &Studio" @@ -4991,13 +5758,13 @@ msgid "&Help" msgstr "&Hilfe" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "" "Es existiert bereits eine Datei mit demselben Namen: %s. Möchten Sie sie " "überschreiben?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "" "Eine Konfiguration mit dem gleichen Namen existiert bereits: %s. Möchten Sie " "sie überschreiben?" @@ -5005,6 +5772,9 @@ msgstr "" msgid "Overwrite file" msgstr "Datei überschreiben" +msgid "Overwrite config" +msgstr "Konfiguration überschreiben" + msgid "Yes to All" msgstr "Ja zu allem" @@ -5062,7 +5832,7 @@ msgid "Filament Settings" msgstr "Filamenteinstellungen" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -5105,7 +5875,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "Die Druckerkamera funktioniert nicht richtig." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Problem aufgetreten. Bitte aktualisieren Sie die Drucker-Firmware und " "versuchen Sie es erneut." @@ -5129,7 +5899,7 @@ msgstr "" "Sie es erneut" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Bitte überprüfen Sie das Netzwerk und versuchen Sie es erneut. Sie können " @@ -5139,8 +5909,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "Der Drucker wurde abgemeldet und kann keine Verbindung herstellen." -msgid "Stopped." -msgstr "Gestoppt." +msgid "Video Stopped." +msgstr "Video gestoppt." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN-Verbindung fehlgeschlagen (Liveview konnte nicht gestartet werden)" @@ -5177,6 +5947,9 @@ msgstr "Informationen" msgid "Playing..." msgstr "Laufend..." +msgid "Loading..." +msgstr "Laden..." + msgid "Year" msgstr "Jahr" @@ -5195,6 +5968,9 @@ msgstr "Dateien nach Monat gruppieren, neueste zuerst." msgid "Show all files, recent first." msgstr "Alle Dateien anzeigen, die neuesten zuerst." +msgid "Timelapse" +msgstr "Zeitraffer" + msgid "Switch to timelapse files." msgstr "Wechseln zu Zeitrafferdateien." @@ -5204,7 +5980,8 @@ msgstr "Video" msgid "Switch to video files." msgstr "Wechseln Sie zu Videodateien." -msgid "Switch to 3mf model files." +#, fuzzy +msgid "Switch to 3MF model files." msgstr "Wechsel zu 3mf-Modelldateien." msgid "Delete selected files from printer." @@ -5231,10 +6008,6 @@ msgstr "Dateiliste vom Drucker neu laden." msgid "No printers." msgstr "Keine Drucker." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Verbindung fehlgeschlagen [%d]!" - msgid "Loading file list..." msgstr "Dateiliste laden..." @@ -5244,33 +6017,20 @@ msgstr "Keine Dateien" msgid "Load failed" msgstr "Laden fehlgeschlagen" -msgid "Initialize failed (Device connection not ready)!" -msgstr "" -"Die Initialisierung ist fehlgeschlagen (Geräteverbindung nicht bereit)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Das Durchsuchen von Dateien auf der MicroSD-Karte wird in der aktuellen " -"Firmware nicht unterstützt. Bitte aktualisieren Sie die Drucker-Firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"Initialisierung fehlgeschlagen (Speicher nicht verfügbar, MicroSD-Karte " -"einlegen.)!" +"Das Durchsuchen von Dateien im Speicher wird in der aktuellen Firmware nicht " +"unterstützt. Bitte aktualisieren Sie die Drucker-Firmware." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "LAN-Verbindung fehlgeschlagen (SD-Karte konnte nicht angezeigt werden)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -"Das durchsuchen von Dateien auf der MicroSD-Karte wird im LAN-Only-Modus " -"nicht unterstützt." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Initialisierung ist fehlgeschlagen (%s)!" +"Das Durchsuchen von Dateien im Speicher wird im LAN-Only-Modus nicht " +"unterstützt." #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5289,7 +6049,7 @@ msgstr "Möchten Sie die Datei '%s' vom Drucker löschen?" msgid "Delete file" msgstr "Datei löschen" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Modellinformationen werden abgerufen..." msgid "Failed to fetch model information from printer." @@ -5299,8 +6059,8 @@ msgid "Failed to parse model information." msgstr "Analysieren von Modellinformationen fehlgeschlagen." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "Die .gcode.3mf-Datei enthält keine G-Code-Daten. Bitte slicen Sie sie mit " "Snapmaker Orca und exportieren Sie eine neue .gcode.3mf-Datei." @@ -5334,6 +6094,9 @@ msgstr "Herunterladen abgeschlossen" msgid "Downloading %d%%..." msgstr "%d%% wird heruntergeladen..." +msgid "Air Condition" +msgstr "Klimatisierung" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5341,6 +6104,9 @@ msgstr "" "Der Drucker wird neu verbunden, die Operation kann nicht sofort " "abgeschlossen werden. Bitte versuchen Sie es später erneut." +msgid "Timeout, please try again." +msgstr "Zeitüberschreitung, bitte versuchen Sie es erneut." + msgid "File does not exist." msgstr "Datei existiert nicht." @@ -5350,13 +6116,54 @@ msgstr "Prüfsummenfehler. Bitte versuchen Sie es erneut." msgid "Not supported on the current printer version." msgstr "Nicht unterstützt auf der aktuellen Druckerversion." -msgid "Storage unavailable, insert SD card." -msgstr "Speicher nicht verfügbar, MicroSD-Karte einlegen." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" +"Bitte überprüfen Sie, ob der Speicher in den Drucker eingelegt ist.\n" +"Wenn er immer noch nicht gelesen werden kann, können Sie versuchen, den " +"Speicher zu formatieren." + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" +"Die Firmware-Version des Druckers ist zu niedrig. Bitte aktualisieren Sie " +"die Firmware und versuchen Sie es erneut." + +msgid "The file already exists, do you want to replace it?" +msgstr "Die Datei ist bereits vorhanden. Möchten Sie sie ersetzen?" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" +"Nicht genügend Speicherplatz. Bitte schaffen Sie Platz und versuchen Sie es " +"erneut." + +msgid "File creation failed, please try again." +msgstr "Dateierstellung fehlgeschlagen, bitte versuchen Sie es erneut." + +msgid "File write failed, please try again." +msgstr "Dateischreibvorgang fehlgeschlagen, bitte versuchen Sie es erneut." + +msgid "MD5 verification failed, please try again." +msgstr "MD5-Überprüfung fehlgeschlagen, bitte versuchen Sie es erneut." + +msgid "File renaming failed, please try again." +msgstr "Dateiumbenennung fehlgeschlagen, bitte versuchen Sie es erneut." + +msgid "File upload failed, please try again." +msgstr "Datei-Upload fehlgeschlagen, bitte versuchen Sie es erneut." #, c-format, boost-format msgid "Error code: %d" msgstr "Fehlercode: %d" +msgid "User cancels task." +msgstr "Benutzer bricht Aufgabe ab." + +msgid "Failed to read file, please try again." +msgstr "Datei konnte nicht gelesen werden, bitte versuchen Sie es erneut." + msgid "Speed:" msgstr "Geschwindigkeit:" @@ -5396,11 +6203,84 @@ msgstr "Invertiere Pitch-Achse" msgid "Invert Roll axis" msgstr "Invertiere Roll-Achse" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Suche" + +msgid "My Device" +msgstr "Mein Gerät" + +msgid "Other Device" +msgstr "Anderes Gerät" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Zugangscode eingeben" + +msgid "Can't find my devices?" +msgstr "Kann das Geräte nicht finden?" + +msgid "Log out successful." +msgstr "Abmeldung erfolgreich." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Beschäftigt" + +msgid "Modifying the device name" +msgstr "Den Gerätenamen ändern" + +msgid "Name is invalid;" +msgstr "Der Name ist ungültig;" + +msgid "illegal characters:" +msgstr "unzulässige Zeichen:" + +msgid "illegal suffix:" +msgstr "unzulässiger Zusatz:" + +msgid "The name is not allowed to be empty." +msgstr "Der Name darf nicht leer sein." + +msgid "The name is not allowed to start with space character." +msgstr "Der Name darf nicht mit einem Leerzeichen beginnen." + +msgid "The name is not allowed to end with space character." +msgstr "Der Name darf nicht mit einem Leerzeichen enden." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "Der Name darf 32 Zeichen nicht überschreiten." + +msgid "Bind with Pin Code" +msgstr "Mit Pin-Code verbinden" + +msgid "Bind with Access Code" +msgstr "Mit Zugangscode verbinden" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "Beenden" + +msgid "Switching..." +msgstr "Wechseln..." + +msgid "Switching failed" +msgstr "Wechseln fehlgeschlagen" + msgid "Printing Progress" msgstr "Druckprozess" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "Teile überspringen" + +msgid "Stop" +msgstr "Stop" msgid "Layer: N/A" msgstr "Schicht: N/A" @@ -5431,8 +6311,8 @@ msgstr "Bewerten" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "MicroSD-Karte" +msgid "Storage" +msgstr "Speicher" msgid "Camera Setting" msgstr "Kameraeinstellung" @@ -5449,35 +6329,41 @@ msgstr "Drucker-Teile" msgid "Print Options" msgstr "Druckoptionen" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Lampe" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Cham" - msgid "Bed" msgstr "Druckbett" msgid "Debug Info" msgstr "Debug-Informationen" -msgid "No SD Card" -msgstr "Keine MicroSD-Karte" +msgid "Filament loading..." +msgstr "Filament wird geladen..." -msgid "SD Card Abnormal" -msgstr "SD-Karte fehlerhaft" +msgid "No Storage" +msgstr "Kein Speicher" + +msgid "Storage Abnormal" +msgstr "Speicher abnormal" msgid "Cancel print" msgstr "Druck abbrechen" -msgid "Are you sure you want to cancel this print?" -msgstr "Möchten Sie diesen Druck wirklich abbrechen?" +msgid "Are you sure you want to stop this print?" +msgstr "Möchten Sie diesen Druck wirklich stoppen?" + +msgid "The printer is busy with another print job." +msgstr "Der Drucker ist mit einem anderen Druckauftrag beschäftigt." + +msgid "Current extruder is busy changing filament." +msgstr "Der aktuelle Extruder ist mit dem Filamentwechsel beschäftigt." + +msgid "Current slot has already been loaded." +msgstr "Der aktuelle Steckplatz wurde bereits geladen." + +msgid "The selected slot is empty." +msgstr "Der ausgewählte Steckplatz ist leer." msgid "Downloading..." msgstr "Herunterladen..." @@ -5499,20 +6385,19 @@ msgid "Layer: %d/%d" msgstr "Schicht: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Heizen Sie die Düse vor dem Laden oder Entladen des Filaments auf über 170 " -"Grad." +"Heizen Sie die Düse vor dem Laden oder Entladen des Filaments auf über 170°C." -msgid "Still unload" -msgstr "Entlade immer noch" - -msgid "Still load" -msgstr "Lade immer noch" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" +"Wenn die Kammertemperatur 40℃ überschreitet, wechselt das System automatisch " +"in den Heizmodus. Bitte bestätigen Sie, ob Sie wechseln möchten." msgid "Please select an AMS slot before calibration" -msgstr "Bitte wählen Sie einen AMS-Slot vor der Kalibrierung aus" +msgstr "Bitte wählen Sie einen AMS-Steckplatz vor der Kalibrierung" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " @@ -5537,8 +6422,21 @@ msgstr "Sport" msgid "Ludicrous" msgstr "Verrückt" -msgid "Can't start this without SD card." -msgstr "Kann ohne MicroSD-Karte nicht gestartet werden." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" +"Das Ausschalten der Lichter während der Aufgabe führt zum Ausfall der KI- " +"Überwachung, wie z.B. Spaghettierkennung. Bitte wählen Sie sorgfältig." + +msgid "Keep it On" +msgstr "Eingeschaltet lassen" + +msgid "Turn it Off" +msgstr "Ausschalten" + +msgid "Can't start this without storage." +msgstr "Ohne Speicher kann dies nicht gestartet werden." msgid "Rate the Print Profile" msgstr "Bewerten Sie das Druckprofil" @@ -5561,13 +6459,10 @@ msgstr "Übermitteln" msgid "Please click on the star first." msgstr "Bitte klicken Sie zuerst auf den Stern." -msgid "InFo" -msgstr "InFo" - msgid "Get oss config failed." msgstr "Fehler beim Abrufen der OSS-Konfiguration." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Bilder hochladen" msgid "Number of images successfully uploaded" @@ -5582,7 +6477,7 @@ msgstr " Hochladen der Konfiguration fehlgeschlagen\n" msgid " No corresponding storage bucket\n" msgstr " Kein entsprechender Speicher\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " Kann nicht geöffnet werden\n" msgid "" @@ -5608,8 +6503,9 @@ msgstr "Hochladen fehlgeschlagen\n" msgid "obtaining instance_id failed\n" msgstr "Abrufen der Instanz-ID fehlgeschlagen\n" +#, fuzzy msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5624,7 +6520,7 @@ msgstr "Fehlermeldung: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5632,7 +6528,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Einige Ihrer Bilder konnten nicht hochgeladen werden. Möchten Sie zur " "Webseite für die Bewertung weitergeleitet werden?" @@ -5642,7 +6538,7 @@ msgstr "Sie können bis zu 16 Bilder auswählen." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Um eine positive Bewertung (4 oder 5 Sterne) abzugeben, ist mindestens ein " "erfolgreicher Druck dieses Druckprofils erforderlich." @@ -5650,12 +6546,22 @@ msgstr "" msgid "Status" msgstr "Status" +msgctxt "Firmware" msgid "Update" -msgstr "Update" +msgstr "Aktualisieren" + +msgid "Assistant(HMS)" +msgstr "Assistent(HMS)" msgid "Don't show again" msgstr "Nicht erneut anzeigen" +msgid "Go to" +msgstr "Gehe zu" + +msgid "Later" +msgstr "Später" + #, c-format, boost-format msgid "%s error" msgstr "%s Fehler" @@ -5683,11 +6589,12 @@ msgstr "%s Information" msgid "Skip" msgstr "Überspringen" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "Neuere 3mf-Version" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" "Die 3mf-Dateiversion ist in der Beta und neuer als die aktuelle Snapmaker Orca- " @@ -5700,13 +6607,13 @@ msgstr "" msgid "Download Beta Version" msgstr "Beta-Version herunterladen" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "Die 3mf-Dateiversion ist neuer als die aktuelle Snapmaker Orca Version." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" "Ein Update von Snapmaker Orca ermöglicht die Nutzung aller Funktionen in der " -"3mf-Datei." +"3MF-Datei." msgid "Current Version: " msgstr "Aktuelle Version: " @@ -5714,9 +6621,36 @@ msgstr "Aktuelle Version: " msgid "Latest Version: " msgstr "Neueste Version: " +msgctxt "Software" +msgid "Update" +msgstr "Aktualisieren" + msgid "Not for now" msgstr "Nicht jetzt" +msgid "Server Exception" +msgstr "Server Ausnahme" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Der Server kann nicht antworten. Bitte klicken Sie auf den folgenden Link, " +"um den Serverstatus zu überprüfen." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Wenn der Server in einem fehlerhaften Zustand ist, können Sie vorübergehend " +"Offline-Druck oder lokalen Netzwerkdruck verwenden." + +msgid "How to use LAN only mode" +msgstr "Wie verwende ich den LAN-Only-Modus" + +msgid "Don't show this dialog again" +msgstr "Diesen Dialog nicht erneut anzeigen" + msgid "3D Mouse disconnected." msgstr "3D-Maus nicht angeschlossen." @@ -5779,10 +6713,16 @@ msgstr[1] "%1$d Objekte haben gemalte Farben." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d Objekt wurde als Teil des geschnittenen Objekts geladen." msgstr[1] "%1$d Objekte wurden als Teile des geschnittenen Objekts geladen." +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" + msgid "ERROR" msgstr "FEHLER" @@ -5804,7 +6744,7 @@ msgstr "Fehler:" msgid "Warning:" msgstr "Warnung:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Export erfolgreich." msgid "Model file downloaded." @@ -5822,11 +6762,11 @@ msgstr " Klicken Sie hier, um es zu installieren." msgid "WARNING:" msgstr "WARNUNG:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "Ihr Modell braucht Stützstrukturen! Bitte aktivieren Sie das Stützmaterial." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "G-Code Pfadüberlappung" msgid "Support painting" @@ -5876,12 +6816,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Untere" -msgid "Enable AI monitoring of printing" -msgstr "AI-Überwachung des Druckvorgangs aktivieren" - -msgid "Sensitivity of pausing is" -msgstr "Die Sensibilität der Pause ist" - msgid "Enable detection of build plate position" msgstr "Positionserkennung der Druckplatte aktivieren" @@ -5892,21 +6826,88 @@ msgstr "" "Die Erkennungsmarke auf den Druckplatten wird erkannt und der Druckvorgang " "unterbrochen, falls die Marke nicht im definierten Bereich liegt." +msgid "Build Plate Detection" +msgstr "Erkennung der Druckplatte" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" +"Identifiziert den Typ und die Position der Druckplatte auf dem Heizbett. Der " +"Druckvorgang wird unterbrochen, wenn eine Unstimmigkeit festgestellt wird." + +msgid "AI Detections" +msgstr "KI-Erkennungen" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" +"Der Drucker sendet eine Assistenzmeldung oder pausiert den Druckvorgang, " +"wenn eines der folgenden Probleme erkannt wird." + +msgid "Enable AI monitoring of printing" +msgstr "AI-Überwachung des Druckvorgangs aktivieren" + +msgid "Pausing Sensitivity:" +msgstr "Pausierungs-Empfindlichkeit:" + +msgid "Spaghetti Detection" +msgstr "Spaghettierkennung" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "Spaghetti-Fehler erkennen (verstreutes loses Filament)." + +msgid "Purge Chute Pile-Up Detection" +msgstr "Erkennung von Abfallstau im Reinigungsrutsche" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "Überwachen, ob sich Abfall in der Reinigungsrutsche angesammelt hat." + +msgid "Nozzle Clumping Detection" +msgstr "Düsenverklumpen-Erkennung" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" +"Überprüfen Sie, ob die Düse durch Filamente oder andere Fremdkörper " +"verklumpt ist." + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" +"Erkennt Lüftingsfehler, der durch Düsenverstopfung oder Filamentmahlung " +"verursacht wird." + msgid "First Layer Inspection" msgstr "Inspektion der ersten Schicht" msgid "Auto-recovery from step loss" msgstr "Automatische Wiederherstellung bei Positionsverlust (Schrittverlust)" +msgid "Open Door Detection" +msgstr "Türöffnungserkernnung" + +msgid "Notification" +msgstr "Benachrichtigung" + +msgid "Pause printing" +msgstr "Druckvorgang pausieren" + +msgid "Store Sent Files on External Storage" +msgstr "Gesendete Dateien auf externem Speicher speichern" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" +"Speichern Sie die Druckdateien, die von Bambu Studio, Bambu Handy und " +"MakerWorld auf externem Speicher initiiert wurden" + msgid "Allow Prompt Sound" msgstr "Erlaube akustische Signale" msgid "Filament Tangle Detect" msgstr "Filamentverwicklung erkannt" -msgid "Nozzle Clumping Detection" -msgstr "Düsenverklumpen-Erkennung" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Überprüfen Sie, ob die Düse durch Filament oder andere Fremdkörper verklumpt " @@ -5915,15 +6916,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Düsentyp" -msgid "Stainless Steel" -msgstr "Edelstahl" +msgid "Nozzle Flow" +msgstr "Düsendurchfluss" + +msgid "Please change the nozzle settings on the printer." +msgstr "Bitte ändern Sie die Düsen-Einstellungen am Drucker." + +msgid "View wiki" +msgstr "Wiki anzeigen" msgid "Hardened Steel" msgstr "Gehärteter Stahl" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Edelstahl" + +msgid "Tungsten Carbide" +msgstr "Wolframcarbid" + +msgid "High flow" +msgstr "Hochgeschwindigkeit" + +msgid "No wiki link available for this printer." +msgstr "Kein Wiki-Link für diesen Drucker verfügbar." msgid "Global" msgstr "Allgemein" @@ -5958,15 +6973,46 @@ msgstr "Entsperre aktuelle Platte " msgid "Lock current plate" msgstr "Speere aktuelle Platte" +msgid "Filament grouping" +msgstr "Filament Gruppierung" + msgid "Edit current plate name" msgstr "Bearbeite den Namen der aktuellen Platte" msgid "Move plate to the front" -msgstr "" +msgstr "Bewege die Platte nach vorne" msgid "Customize current plate" msgstr "Aktuelle Platte anpassen" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "Die %s Düse kann %s nicht drucken." + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "Mischen von %1% mit %2% im Druck wird nicht empfohlen.\n" + +msgid " nozzle" +msgstr " Düse" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" +"Es wird nicht empfohlen, die folgenden Filamente mit %1% zu drucken: %2%\n" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" +"Es wird nicht empfohlen, die folgenden Düsen- und Filamentkombinationen zu " +"verwenden:\n" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "%1% mit %2%\n" + #, boost-format msgid " plate %1%:" msgstr " Druckplatte %1%:" @@ -5995,14 +7041,76 @@ msgstr "Geschätzte Zeit" msgid "Filament changes" msgstr "Filamentwechsel" +msgid "Set the number of AMS installed on the nozzle." +msgstr "Stellen Sie die Anzahl der auf der Düse installierten AMS ein." + +msgid "AMS(4 slots)" +msgstr "AMS(4 Steckplätze)" + +msgid "AMS(1 slot)" +msgstr "AMS(1 Steckplatz)" + +msgid "Not installed" +msgstr "Nicht installiert" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" +"Die Software unterstützt nicht die Verwendung unterschiedlicher " +"Düsendurchmesser für einen Druck. Wenn die linke und rechte Düse nicht " +"übereinstimmen, können wir nur mit dem Einzelkopf-Druck fortfahren. Bitte " +"bestätigen Sie, welche Düse Sie für dieses Projekt verwenden möchten." + +msgid "Switch diameter" +msgstr "Durchmesser wechseln" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "linke Düse: %smm" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "rechte Düse: %smm" + +msgid "Sync printer information" +msgstr "Syncronisiere die Druckerinformationen" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" +"Der aktuell ausgewählte Maschinenvorgabe stimmt nicht mit dem verbundenen " +"Druckertyp überein.\n" +"Möchten Sie die Synchronisierung fortsetzen?" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" +"Es gibt nicht eingestellte Düsentypen. Bitte stellen Sie die Düsentypen " +"aller Extruder ein, bevor Sie synchronisieren." + +msgid "Sync extruder infomation" +msgstr "Synchronisiere Extruder-Informationen" + msgid "Click to edit preset" msgstr "Klicken Sie hier, um das Profil zu bearbeiten" msgid "Connection" msgstr "Verbindung" -msgid "Bed type" -msgstr "Druckbetttyp" +msgid "Sync info" +msgstr "Info Synchronisieren" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "Synchronisiere Düseninformationen und die Anzahl der AMS" + +msgid "Project Filaments" +msgstr "Projektfilamente" msgid "Flushing volumes" msgstr "Reinigungsvolumen" @@ -6025,49 +7133,38 @@ msgstr "Suche Platte, Objekt und Teil." msgid "Pellets" msgstr "Pellets" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Keine AMS-Filamente. Bitte wählen Sie auf der Seite \"Gerät\" einen Drucker " -"aus, um AMS-Informationen zu laden." - -msgid "Sync filaments with AMS" -msgstr "Filamente mit AMS synchronisieren" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"Bei der Synchronisierung von Filamenten mit dem AMS werden alle aktuell " -"ausgewählten Filamentprofile und Farben gelöscht. Möchten Sie fortfahren?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Es wurde bereits eine Synchronisation durchgeführt. Möchtest du nur " -"Änderungen synchronisieren oder alles neu synchronisieren?" - -msgid "Sync" -msgstr "Sync" - -msgid "Resync" -msgstr "Resync" +"Nach Abschluss Ihrer Operation wird das %s-Projekt geschlossen und ein neues " +"Projekt erstellt." msgid "There are no compatible filaments, and sync is not performed." msgstr "" "Es gibt keine kompatiblen Filamente und die Synchronisierung wird nicht " "ausgeführt." +msgid "Sync filaments with AMS" +msgstr "Filamente mit AMS synchronisieren" + msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Es gibt einige unbekannte Filamente, die generischen Voreinstellungen " -"zugeordnet sind. Bitte aktualisieren Sie Snapmaker Orca oder starten Sie " -"Snapmaker Orca neu, um zu überprüfen, ob es ein Update für " -"Systemvoreinstellungen gibt." +"Es gibt einige unbekannte oder nicht kompatible Filamente, die auf " +"generische Vorgaben abgebildet sind.\n" +"Bitte aktualisieren Sie Snapmaker Orca oder starten Sie Snapmaker Orca neu, um zu " +"überprüfen, ob es ein Update für Systemvorgaben gibt." + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." +msgstr "" +"Filamenttyp- und Farbinformationen wurden synchronisiert, aber Steckplatz- " +"informationen sind nicht enthalten." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6075,15 +7172,15 @@ msgstr "Möchten Sie die Änderungen unter \" %1% \" speichern?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Erfolgreich ausgeworfen. Das Gerät %s(%s) kann jetzt sicher vom Computer " "entfernt werden." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Das Auswerfen des Geräts %s(%s) ist fehlgeschlagen." +msgid "Ejecting of device %s (%s) has failed." +msgstr "Das Auswerfen des Geräts %s (%s) ist fehlgeschlagen." msgid "Previous unsaved project detected, do you want to restore it?" msgstr "" @@ -6119,66 +7216,106 @@ msgstr "" "Oberflächenfehlern führen. Es wird empfohlen, in den Smooth-Modus zu " "wechseln." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" +"Der Smooth-Modus für Zeitraffer ist aktiviert, aber der Prime-Turm ist " +"deaktiviert, was zu Druckfehlern führen kann. Bitte aktivieren Sie den Prime-" +"Turm, slice das Modell neu und drucken Sie erneut." + msgid "Expand sidebar" msgstr "Seitenleiste erweitern" msgid "Collapse sidebar" msgstr "Seitenleiste reduzieren" +msgid "Tab" +msgstr "Tab" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Datei wird geladen: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "Der 3mf stammt nicht vom Snapmaker Orca, lade nur die Geometriedaten." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "Der 3MF stammt nicht vom Snapmaker Orca, lade nur die Geometriedaten." -msgid "Load 3mf" -msgstr "Lade 3mf" +msgid "Load 3MF" +msgstr "Lade 3MF" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." msgstr "" -"Die Version %s von 3mf ist neuer als die Version %s von %s, folgende " +"Dieses Projekt wurde mit einem Snapmaker Orca 2.3.1-alpha erstellt und verwendet " +"Vorlageneinstellungen für die Infill-Rotation, die möglicherweise nicht " +"richtig mit Ihrem aktuellen Infill-Muster funktionieren. Dies könnte zu " +"schwacher Unterstützung oder Druckqualitätsproblemen führen." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Möchten Sie, dass Snapmaker Orca dies automatisch behebt, indem die " +"Vorlageneinstellungen für die Rotation gelöscht werden?" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "" +"Die Version %s von 3MF ist neuer als die Version %s von %s, folgende " "Schlüssel wurden nicht erkannt:" msgid "You'd better upgrade your software.\n" msgstr "Sie sollten Ihre Software aktualisieren.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Die Version %s der 3mf ist neuer als die Version %s %s. Bitte Ihre Software " +"Die Version %s der 3MF ist neuer als die Version %s %s. Bitte Ihre Software " "aktualisieren." -msgid "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"Die 3MF wurde von einer alten Snapmaker Orca-Version erstellt, lade nur die " +"Geometriedaten." + +msgid "Invalid values found in the 3MF:" msgstr "Ungültige Werte in der 3MF-Datei gefunden:" msgid "Please correct them in the param tabs" msgstr "Bitte korrigieren Sie sie in den Parameter-Einstellungen." -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "" -"Die 3mf hat folgende modifizierte G-Codes in Filament- oder Druckerprofilen:" - msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "" +"Die 3MF hat folgende modifizierte G-Codes in Filament- oder Druckerprofilen:" + +#, fuzzy +msgid "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Bitte bestätigen Sie, dass diese modifizierten G-Codes sicher sind, um " "Schäden an der Maschine zu vermeiden!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "Modifizierte G-Codes" -msgid "The 3mf has following customized filament or printer presets:" -msgstr "Die 3mf hat folgende benutzerdefinierte Filament- oder Druckerprofile:" +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "Die 3MF hat folgende benutzerdefinierte Filament- oder Druckerprofile:" +#, fuzzy msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Bitte bestätigen Sie, dass die G-Codes innerhalb dieser Profile sicher sind, " @@ -6187,7 +7324,8 @@ msgstr "" msgid "Customized Preset" msgstr "Benutzerdefinierte Profile" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Der Name der Komponenten in der Step-Datei ist nicht im UTF8-Format!" msgid "The name may show garbage characters!" @@ -6241,12 +7379,26 @@ msgstr "Diese Dateien als ein einziges Objekt mit mehreren Teilen laden?\n" msgid "Object with multiple parts was detected" msgstr "Objekt mit mehreren Teilen wurde entdeckt" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" +"Der verbundene Drucker ist %s. Er muss mit dem Projektprofil zum Drucken " +"übereinstimmen.\n" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" +"Möchten Sie die Druckerinformationen synchronisieren und das Profil " +"automatisch wechseln?" + msgid "The file does not contain any geometry data." msgstr "Die Datei enthält keine Geometriedaten." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Ihr Objekt scheint zu groß zu sein. Möchten Sie es verkleinern, um es " "automatisch an das Druckbett anzupassen?" @@ -6311,6 +7463,34 @@ msgstr "Wählen Sie eine neue Datei aus" msgid "File for the replace wasn't selected" msgstr "Datei für das Ersetzen wurde nicht ausgewählt" +msgid "Select folder to replace from" +msgstr "Wählen Sie ein Verzeichnis aus um daraus zu ersetzen" + +msgid "Directory for the replace wasn't selected" +msgstr "Verzeichnis um daraus zu ersetzen wurde nicht ausgewählt" + +msgid "Replaced with STLs from directory:\n" +msgstr "Ersetzt mit STLs aus dem Verzeichnis:\n" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "✖ Übersprungen %1%: gleiche Datei.\n" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "✖ Übersprungen %1%: Datei existiert nicht.\n" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "✖ Übersprungen %1%: Ersetzen fehlgeschlagen.\n" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "✔ Ersetzt %1%.\n" + +msgid "Replaced volumes" +msgstr "Ersetzte Volumen" + msgid "Please select a file" msgstr "Bitte wählen Sie eine Datei" @@ -6356,12 +7536,28 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Vorschaumodus:\n" "Die geladene Datei enthält nur G-Code Befehle. Die Seite \"Vorbereiten\" " "kann nicht aufgerufen werden." +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" +"Die Düsenart- und AMS-Mengeninformationen wurden nicht vom verbundenen " +"Drucker synchronisiert.\n" +"Nach der Synchronisierung kann die Software die Druckzeit und den " +"Filamentverbrauch beim Slicen optimieren.\n" +"Möchten Sie jetzt synchronisieren?" + +msgid "Sync now" +msgstr "Jetzt synchronisieren" + msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Sie können die geänderten Profile in das neue Projekt übernehmen oder sie " @@ -6388,13 +7584,13 @@ msgstr "Projekt speichern" msgid "Importing Model" msgstr "Modell importieren" -msgid "prepare 3mf file..." -msgstr "3mf-Datei vorbereiten…" +msgid "prepare 3MF file..." +msgstr "3MF-Datei vorbereiten…" msgid "Download failed, unknown file format." msgstr "Download fehlgeschlagen, unbekanntes Dateiformat." -msgid "downloading project ..." +msgid "downloading project..." msgstr "Projekt wird heruntergeladen..." msgid "Download failed, File size exception." @@ -6413,13 +7609,27 @@ msgstr "" "Der Import in Snapmaker Orca ist fehlgeschlagen. Bitte laden Sie die Datei " "manuell herunter und importieren Sie sie." +msgid "INFO:" +msgstr "INFO:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Keine Beschleunigungen für die Kalibrierung bereitgestellt. Verwenden Sie " +"den Standardbeschleunigungswert" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Keine Geschwindigkeiten für die Kalibrierung eingestellt. Verwenden die " +"optimale Geschwindigkeit" + msgid "Import SLA archive" msgstr "SLA-Archiv importieren" msgid "The selected file" msgstr "Die ausgewählte Datei" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "enthält keinen gültigen G-Code." msgid "Error occurs while loading G-code file" @@ -6459,10 +7669,10 @@ msgstr "Es kann immer nur eine G-Code-Datei gleichzeitig geöffnet werden." msgid "G-code loading" msgstr "G-Code wird geladen" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G-Code-Dateien und Modelle können nicht zusammen geladen werden!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Modelle können im Vorschaumodus nicht hinzugefügt werden" msgid "All objects will be removed, continue?" @@ -6502,6 +7712,14 @@ msgstr "" "Die Datei %s wurde an den Speicher des Druckers gesendet und kann auf dem " "Drucker angezeigt werden." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" +"Die Düsenart ist nicht eingestellt. Bitte stellen Sie die Düse ein und " +"versuchen Sie es erneut." + +msgid "The nozzle type is not set. Please check." +msgstr "Die Düsenart ist nicht eingestellt. Bitte überprüfen Sie es." + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -6533,19 +7751,6 @@ msgstr "" "Eine boolesche Operation kann für Modellnetze nicht ausgeführt werden. Es " "werden nur positive Teile exportiert." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Möchten Sie die Original-SVGs mit ihren lokalen Pfaden in die 3MF-Datei " -"speichern?\n" -"Wenn Sie auf \"NEIN\" klicken, können alle SVGs im Projekt nicht mehr " -"bearbeitet werden." - -msgid "Private protection" -msgstr "Privatsphäre" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" "Ist der Drucker bereit? Ist die Druckplatte eingelegt, leer und sauber?" @@ -6553,6 +7758,9 @@ msgstr "" msgid "Upload and Print" msgstr "Hochladen und Drucken" +msgid "Abnormal print file data. Please slice again" +msgstr "Fehlerhafte Daten in der Druckdatei. Bitte slicen Sie erneut" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6575,8 +7783,41 @@ msgstr "" msgid "Optimize Rotation" msgstr "Rotation optimieren" -msgid "Invalid number" -msgstr "Ungültige Nummer" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" +"Drucker nicht verbunden. Bitte gehen Sie zur Geräte-Seite, um %s vor der " +"Synchronisierung zu verbinden." + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" +"Der aktuell verbundene Drucker auf der Geräte-Seite ist nicht %s. Bitte " +"wechseln Sie zu %s vor der Synchronisierung." + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" +"Es sind keine Filamente auf dem Drucker. Bitte laden Sie zuerst die " +"Filamente auf den Drucker." + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" +"Die Filamente auf dem Drucker sind alle unbekannte Typen. Bitte gehen Sie " +"zum Druckerbildschirm oder zur Software-Geräteseite, um den Filamenttyp " + +msgid "Device Page" +msgstr "Geräteseite" + +msgid "Synchronize AMS Filament Information" +msgstr "Synchronisiere AMS-Filamentinformationen" msgid "Plate Settings" msgstr "Druck-Platteneinstellungen" @@ -6617,9 +7858,6 @@ msgstr "Volumen: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Dreiecke: %1%\n" -msgid "Tips:" -msgstr "Tipps:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6629,14 +7867,42 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" "Plate %d: %s wird nicht empfohlen, um Filament %s (%s) zu drucken. Wenn Sie " "dennoch diesen Druck durchführen möchten, stellen Sie bitte die " "Betttemperatur dieses Filaments auf einen Wert größer als Null." +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" +"Derzeit kann das Objektkonfigurationsformular nicht mit einem Mehrfach-" +"Extruder-Drucker verwendet werden." + +msgid "Not available" +msgstr "Nicht verfügbar" + +msgid "isometric" +msgstr "isometrisch" + +msgid "top_front" +msgstr "oben_vorne" + +msgid "top" +msgstr "oben" + +msgid "bottom" +msgstr "unten" + +msgid "front" +msgstr "vorn" + +msgid "rear" +msgstr "hinten" + msgid "Switching the language requires application restart.\n" msgstr "Der Wechsel der Sprache erfordert einen Neustart der Anwendung.\n" @@ -6653,18 +7919,58 @@ msgstr "" msgid "Changing application language" msgstr "Anwendungssprache ändern" +msgid "Asia-Pacific" +msgstr "Asien-Pazifik" + +msgid "China" +msgstr "China" + +msgid "Europe" +msgstr "Europa" + +msgid "North America" +msgstr "Nordamerika" + +msgid "Others" +msgstr "Sonstiges" + msgid "Changing the region will log out your account.\n" msgstr "Wenn Sie die Region ändern, werden Sie von Ihrem Konto abgemeldet.\n" msgid "Region selection" msgstr "Auswahl der Region" -msgid "Second" -msgstr "Sekunde" +msgid "sec" +msgstr "Sek" + +msgid "The period of backup in seconds." +msgstr "Die Zeitdauer für die Sicherung in Sekunden." + +msgid "Bed Temperature Difference Warning" +msgstr "Warnung bei Temperaturunterschieden des Druckbetts" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" +"Die Verwendung von Filamenten mit erheblich unterschiedlichen Temperaturen " +"kann verursachen:\n" +"• Verstopfung des Extruders\n" +"• Düsenbeschädigung\n" +"• Probleme mit der Schichthaftung\n" +"\n" +"Möchten Sie diese Funktion weiterhin aktivieren?" msgid "Browse" msgstr "Suchen" +msgid "Choose folder for downloaded items" +msgstr "Wählen Sie den Ordner für heruntergeladene Elemente" + msgid "Choose Download Directory" msgstr "Wählen Sie das Download-Verzeichnis" @@ -6683,43 +7989,8 @@ msgstr "Aktuelle Instanz" msgid "Current Instance Path: " msgstr "Aktueller Instanzpfad: " -msgid "General Settings" -msgstr "Allgemeine Einstellungen" - -msgid "Asia-Pacific" -msgstr "Asien-Pazifik" - -msgid "China" -msgstr "China" - -msgid "Europe" -msgstr "Europa" - -msgid "North America" -msgstr "Nordamerika" - -msgid "Others" -msgstr "Sonstiges" - -msgid "Login Region" -msgstr "Login-Region" - -msgid "Stealth Mode" -msgstr "Unsichtbarer Modus" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" -"Dies stoppt die Übertragung von Daten an die Cloud-Dienste von Bambu. " -"Benutzer, die keine BBL-Maschinen verwenden oder nur den LAN-Modus " -"verwenden, können diese Funktion sicher aktivieren." - -msgid "Enable network plugin" -msgstr "Netzwerk-Plugin aktivieren" - -msgid "Check for stable updates only" -msgstr "Nur nach stabilen Updates suchen" +msgid "General" +msgstr "Allgemein" msgid "Metric" msgstr "Metrisch" @@ -6730,6 +8001,18 @@ msgstr "Imperial" msgid "Units" msgstr "Einheiten" +msgid "Home" +msgstr "Startseite" + +msgid "Default page" +msgstr "Standardseite" + +msgid "Set the page opened on startup." +msgstr "Legen Sie die Seite fest, die beim Start geöffnet wird." + +msgid "Enable dark mode" +msgstr "Dunklen Modus aktivieren" + msgid "Allow only one Snapmaker Orca instance" msgstr "Nur eine Snapmaker Orca-Instanz zulassen" @@ -6751,14 +8034,114 @@ msgstr "" "andere Instanz von Snapmaker Orca läuft, wird diese Instanz stattdessen " "reaktiviert." -msgid "Home" -msgstr "Startseite" +msgid "Show splash screen" +msgstr "Splash-Screen anzeigen" -msgid "Default Page" -msgstr "Standardseite" +msgid "Show the splash screen during startup." +msgstr "Zeige den Splash-Screen beim Start." -msgid "Set the page opened on startup." -msgstr "Legen Sie die Seite fest, die beim Start geöffnet wird." +msgid "Downloads folder" +msgstr "Download-Ordner" + +msgid "Target folder for downloaded items" +msgstr "Zielordner für heruntergeladene Elemente" + +msgid "Load All" +msgstr "Alle laden" + +msgid "Ask When Relevant" +msgstr "Fragen, wenn relevant" + +msgid "Always Ask" +msgstr "Immer fragen" + +msgid "Load Geometry Only" +msgstr "Nur Geometrie laden" + +msgid "Load behaviour" +msgstr "Ladeverhalten" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"sollen Drucker/Filament/Prozess Einstellungen geladen werden beim Öffnen " +"einer .3mf?" + +msgid "Maximum recent files" +msgstr "Maximum zuletzt verwendeter Dateien" + +msgid "Maximum count of recent files" +msgstr "Maximale Anzahl der zuletzt verwendeten Dateien" + +msgid "Add STL/STEP files to recent files list" +msgstr "STL/STEP Dateien zur Liste der zuletzt verwendeten Dateien hinzufügen" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Keine Warnungen beim Laden von 3MF mit modifizierten G-Codes" + +msgid "Show options when importing STEP file" +msgstr "Optionen beim Importieren von STEP-Dateien anzeigen" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Wenn aktiviert, wird während des Imports von STEP-Dateien ein Dialogfeld " + +msgid "Auto backup" +msgstr "Automatische Datensicherung" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Erstellen Sie regelmäßig Sicherungskopien Ihres Projekts,um es im Falle " +"eines Absturzes wiederherstellen zu können." + +msgid "Preset" +msgstr "Voreinstellung" + +msgid "Remember printer configuration" +msgstr "Druckerkonfiguration merken" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Wenn aktiviert, merkt sich Orca die Filament-/Prozesskonfiguration für jeden " +"Drucker und wechselt automatisch." + +msgid "Features" +msgstr "Funktionen" + +msgid "Multi device management" +msgstr "Multi-Geräte-Verwaltung" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Wenn diese Option aktiviert ist, können Sie eine Aufgabe gleichzeitig an " +"mehrere Geräte senden und mehrere Geräte verwalten." + +msgid "(Requires restart)" +msgstr "(Erfordert Neustart)" + +msgid "Pop up to select filament grouping mode" +msgstr "Popup zum Auswählen des Filament-Gruppierungsmodus" + +msgid "Behaviour" +msgstr "Verhalten" + +msgid "All" +msgstr "Alle" + +msgid "Auto flush after changing..." +msgstr "Automatisches Spülen nach Änderung von ..." + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" +"Automatisches Berechnen der Spülvolumina bei Änderung der ausgewählten Werte" + +msgid "Auto arrange plate after cloning" +msgstr "Druckplatte nach dem Klonen automatisch anordnen" msgid "Touchpad" msgstr "Touchpad" @@ -6775,6 +8158,14 @@ msgstr "" "Standard: LMB+Verschieben für Rotation, RMB/MMB+Verschieben für Schwenken.\n" "Touchpad: Alt+Verschieben für Rotation, Shift+Verschieben für Schwenken." +msgid "Orbit speed multiplier" +msgstr "Orbitgeschwindigkeitsmultiplikator" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" +"Multipliziert die Orbitgeschwindigkeit für feinere oder gröbere " +"Kamerabewegungen." + msgid "Zoom to mouse position" msgstr "Zum Mausposition zoomen" @@ -6791,98 +8182,119 @@ msgstr "Freie Kamera verwenden" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Wenn aktiviert, wird die freie Kamera verwendet." +msgid "Swap pan and rotate mouse buttons" +msgstr "Schwenk- und Dreh-Maustasten vertauschen" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Wenn aktiviert, werden die Schwenk- und Drehfunktionen der linken und " +"rechten Maustaste vertauscht." + msgid "Reverse mouse zoom" msgstr "Maus-Zoom umkehren" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "Wenn aktiviert, wird die Richtung des Zooms mit dem Mausrad umgekehrt." -msgid "Show splash screen" -msgstr "Splash-Screen anzeigen" +msgid "Clear my choice on..." +msgstr "Meine Auswahl löschen bei ..." -msgid "Show the splash screen during startup." -msgstr "Zeige den Splash-Screen beim Start." +msgid "Unsaved projects" +msgstr "nicht gespeicherte Projekte" -msgid "Show \"Tip of the day\" notification after start" -msgstr "Benachrichtigung \"Tipp des Tages\" nach dem Start anzeigen" +msgid "Clear my choice on the unsaved projects." +msgstr "Meine Auswahl für nicht gespeicherte Projekte löschen." -msgid "If enabled, useful hints are displayed at startup." -msgstr "Wenn aktiviert, werden beim Start nützliche Hinweise angezeigt." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Reinigungsvolumen: Auto-Berechnung bei jeder Farbänderung." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Wenn aktiviert, wird bei jeder Farbänderung automatisch berechnet." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Reinigungsvolumen: Auto-Berechnung bei jedem Filamentwechsel." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "Wenn aktiviert, wird bei jedem Filamentwechsel automatisch berechnet." - -msgid "Remember printer configuration" -msgstr "Druckerkonfiguration merken" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" -"Wenn aktiviert, merkt sich Orca die Filament-/Prozesskonfiguration für jeden " -"Drucker und wechselt automatisch." - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "Multi-Geräte-Verwaltung (nach Neustart von Studio wirksam)." - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"Wenn diese Option aktiviert ist, können Sie eine Aufgabe gleichzeitig an " -"mehrere Geräte senden und mehrere Geräte verwalten." - -msgid "Network" -msgstr "Netzwerk" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "Benutzerprofile automatisch synchronisieren (Drucker/Filament/Prozess)" - -msgid "User Sync" -msgstr "Benutzer-Synchronisation" - -msgid "Update built-in Presets automatically." -msgstr "Aktualisiere integrierte Voreinstellungen automatisch." - -msgid "System Sync" -msgstr "System-Synchronisation " +msgid "Unsaved presets" +msgstr "nicht gespeicherte Voreinstellungen" msgid "Clear my choice on the unsaved presets." msgstr "Meine Auswahl bei den nicht gespeicherten Voreinstellungen löschen." +msgid "Synchronizing printer preset" +msgstr "Synchronisiere Druckerprofil" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" +"Lösche meine Auswahl zum Synchronisieren des Druckerprofils nach dem Laden " +"der Datei." + +msgid "Login region" +msgstr "Login region" + +msgid "Stealth mode" +msgstr "Unsichtbarer Modus" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Dies stoppt die Übertragung von Daten an die Cloud-Dienste von Bambu. " +"Benutzer, die keine BBL-Maschinen verwenden oder nur den LAN-Modus " +"verwenden, können diese Funktion sicher aktivieren." + +msgid "Network test" +msgstr "Netzwerktest" + +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "Aktualisieren & synchronisieren" + +msgid "Check for stable updates only" +msgstr "Nur nach stabilen Updates suchen" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "Benutzerprofile automatisch synchronisieren (Drucker/Filament/Prozess)" + +msgid "Update built-in Presets automatically." +msgstr "Aktualisiere integrierte Voreinstellungen automatisch." + +msgid "Network plugin" +msgstr "Netzwerk-Plugin" + +msgid "Enable network plugin" +msgstr "Netzwerk-Plugin aktivieren" + +msgid "Use legacy network plugin" +msgstr "Verwenden Sie das alte Netzwerk-Plugin" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" +"Deaktivieren Sie, um das neueste Netzwerk-Plugin zu verwenden, das neue " + msgid "Associate files to Snapmaker Orca" msgstr "Dateien mit Snapmaker Orca verknüpfen" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Dateiendung .3mf mit Snapmaker Orca verknüpfen" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Wenn aktiviert, wird Snapmaker Orca als Standardanwendung zum Öffnen von .3mf-" "Dateien festgelegt" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Dateiendung .stl mit Snapmaker Orca verknüpfen" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Wenn aktiviert, wird Snapmaker Orca als Standardanwendung zum Öffnen von .stl-" "Dateien festgelegt" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Dateiendung .step/.stp mit Snapmaker Orca verknüpfen" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Wenn aktiviert, wird Snapmaker Orca als Standardanwendung zum Öffnen von .step-" "Dateien festgelegt" @@ -6890,44 +8302,8 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "Web-Links mit Snapmaker Orca verknüpfen" -msgid "Associate URLs to Snapmaker Orca" -msgstr "URLs mit Snapmaker Orca verknüpfen" - -msgid "Maximum recent projects" -msgstr "Höchstanzahl an letzten Projekten" - -msgid "Maximum count of recent projects" -msgstr "Maximale Anzahl an zuletzt geöffneten Projekten" - -msgid "Clear my choice on the unsaved projects." -msgstr "Meine Auswahl für nicht gespeicherte Projekte löschen." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Keine Warnungen beim Laden von 3MF mit modifizierten G-Codes" - -msgid "Auto-Backup" -msgstr "Automatische Datensicherung" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Erstellen Sie regelmäßig Sicherungskopien Ihres Projekts,um es im Falle " -"eines Absturzes wiederherstellen zu können." - -msgid "every" -msgstr "jede/r/s" - -msgid "The peroid of backup in seconds." -msgstr "Die Zeitdauer für die Sicherung in Sekunden." - -msgid "Downloads" -msgstr "Downloads" - -msgid "Dark Mode" -msgstr "Dunkler Modus" - -msgid "Enable Dark mode" -msgstr "Dunklen Modus aktivieren" +msgid "Developer" +msgstr "Entwickler" msgid "Develop mode" msgstr "Entwicklermodus" @@ -6935,11 +8311,47 @@ msgstr "Entwicklermodus" msgid "Skip AMS blacklist check" msgstr "Überspringen der AMS Blacklist-Prüfung" -msgid "Home page and daily tips" -msgstr "Startseite und tägliche Tipps" +msgid "Remove mixed temperature restriction" +msgstr "Entfernen der Einschränkung für gemischte Temperaturen" -msgid "Show home page on startup" -msgstr "Startseite beim Starten anzeigen" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" +"Mit dieser Option können Sie Materialien mit großen Temperaturunterschieden " +"zusammen drucken." + +msgid "Allow Abnormal Storage" +msgstr "Fehlerhaften Speicher zulassen" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" +"Dies ermöglicht die Verwendung von Speicher, der vom Drucker als " +"fehlerhaft markiert ist.\n" +"Verwendung auf eigenes Risiko, kann Probleme verursachen!" + +msgid "Log Level" +msgstr "Protokollstufe" + +msgid "fatal" +msgstr "verhängnisvoll" + +msgid "error" +msgstr "Fehler" + +msgid "warning" +msgstr "Warnung" + +msgid "debug" +msgstr "Fehlersuche" + +msgid "trace" +msgstr "Spurensuche" + +msgid "Debug" +msgstr "Fehlersuche" msgid "Sync settings" msgstr "Synchronisationseinstellungen" @@ -6980,24 +8392,6 @@ msgstr "SSL aktivieren (FTP)" msgid "Internal developer mode" msgstr "Interner Entwicklermodus" -msgid "Log Level" -msgstr "Protokollstufe" - -msgid "fatal" -msgstr "verhängnisvoll" - -msgid "error" -msgstr "Fehler" - -msgid "warning" -msgstr "Warnung" - -msgid "debug" -msgstr "Fehlersuche" - -msgid "trace" -msgstr "Spurensuche" - msgid "Host Setting" msgstr "Host-Einstellung" @@ -7019,10 +8413,10 @@ msgstr "Debug Speicher-Taste" msgid "save debug settings" msgstr "Debug-Einstellungen speichern" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "DEBUG-Einstellungen wurden erfolgreich gespeichert!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Cloud-Umgebung gewechselt; Bitte erneut anmelden!" msgid "System presets" @@ -7034,14 +8428,20 @@ msgstr "Benutzerdefinierte Profile" msgid "Incompatible presets" msgstr "Inkompatible Profile" +msgid "My Printer" +msgstr "Mein Drucker" + +msgid "Left filaments" +msgstr "linke Filamente" + msgid "AMS filaments" msgstr "AMS Filament" -msgid "Click to pick filament color" -msgstr "Klicken Sie hier, um die Filamentfarbe auszuwählen" +msgid "Right filaments" +msgstr "rechte Filamente" -msgid "Please choose the filament colour" -msgstr "Bitte wählen Sie die Filamentfarbe aus." +msgid "Click to select filament color" +msgstr "Klicken Sie hier, um die Filamentfarbe auszuwählen" msgid "Add/Remove presets" msgstr "Profil hinzufügen/entfernen" @@ -7052,18 +8452,33 @@ msgstr "Profil bearbeiten" msgid "Project-inside presets" msgstr "Projektinternes Profil" +msgid "System" +msgstr "System" + +msgid "Unsupported presets" +msgstr "Nicht unterstützte Profile" + +msgid "Unsupported" +msgstr "Nicht unterstützt" + msgid "Add/Remove filaments" msgstr "Filament hinzufügen/entfernen" msgid "Add/Remove materials" msgstr "Materialien hinzufügen/entfernen" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Systemdrucker auswählen/entfernen" msgid "Create printer" msgstr "Drucker erstellen" +msgid "Empty" +msgstr "Leer" + +msgid "Incompatible" +msgstr "Inkompatibel" + msgid "The selected preset is null!" msgstr "Das selektierte Profil ist leer!" @@ -7082,6 +8497,12 @@ msgstr "Bitte geben Sie einen Schichtwert (>= 2) ein." msgid "Plate name" msgstr "Platten-Name" +msgid "Same as Global Plate Type" +msgstr "Entspricht dem globalen Plattentyp" + +msgid "Bed type" +msgstr "Druckbetttyp" + msgid "Same as Global Print Sequence" msgstr "Gleich wie globale Drucksequenz" @@ -7100,9 +8521,6 @@ msgstr "Vasenmodus" msgid "First layer filament sequence" msgstr "Erste Filament-Schichtsequenz" -msgid "Same as Global Plate Type" -msgstr "Entspricht dem globalen Plattentyp" - msgid "Same as Global Bed Type" msgstr "Entspricht dem allgemeinen Bettyp" @@ -7122,30 +8540,30 @@ msgid "Slice all plate to obtain time and filament estimation" msgstr "" "Slicen Sie alle Druckplatten, um Zeit- und Filamentschätzungen zu erhalten" -msgid "Packing project data into 3mf file" -msgstr "Packen der Projektdaten in eine 3mf-Datei" +msgid "Packing project data into 3MF file" +msgstr "Packen der Projektdaten in eine 3MF-Datei" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Hochladen der 3mf" msgid "Jump to model publish web page" msgstr "Zur Modellveröffentlichungs-Webseite springen" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Hinweis: Die Vorbereitung kann einige Minuten dauern. Bitte haben Sie Geduld." msgid "Publish" msgstr "Veröffentlichen" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Veröffentlichung wurde abgebrochen" msgid "Slicing Plate 1" msgstr "Slicen der Druckplatte 1" -msgid "Packing data to 3mf" -msgstr "Daten in 3mf packen" +msgid "Packing data to 3MF" +msgstr "Daten in 3MF packen" msgid "Jump to webpage" msgstr "Zu einer Website springen" @@ -7163,7 +8581,7 @@ msgstr "Projektbasiertes Profil" msgid "Name is unavailable." msgstr "Der Name ist nicht verfügbar." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "Überschreiben eines Systemprofils ist nicht erlaubt" #, boost-format @@ -7171,12 +8589,13 @@ msgid "Preset \"%1%\" already exists." msgstr "Profil \"%1%\" existiert bereits." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" "Profil \"%1%\" existiert bereits und ist mit dem aktuellen Drucker nicht " "kompatibel." -msgid "Please note that saving action will replace this preset" +msgid "Please note that saving will overwrite this preset." msgstr "Bitte beachten Sie, dass das Speichern dieses Profil überschreibt." msgid "The name cannot be the same as a preset alias name." @@ -7213,33 +8632,6 @@ msgstr "Wechseln Sie einfach zu \"%1%\"" msgid "Task canceled" msgstr "Auftrag abgebrochen" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Suche" - -msgid "My Device" -msgstr "Mein Gerät" - -msgid "Other Device" -msgstr "Anderes Gerät" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Zugangscode eingeben" - -msgid "Can't find my devices?" -msgstr "Kann das Geräte nicht finden?" - -msgid "Log out successful." -msgstr "Abmeldung erfolgreich." - -msgid "Busy" -msgstr "Beschäftigt" - msgid "Bambu Cool Plate" msgstr "Bambu kalte Druckplatte" @@ -7247,26 +8639,79 @@ msgid "PLA Plate" msgstr "PLA-Platte" msgid "Bambu Engineering Plate" -msgstr "Bambu technische Druckplatte" +msgstr "Bambu Engineering Platte" msgid "Bambu Smooth PEI Plate" -msgstr "Bambu glatte PEI-Platte" +msgstr "Bambu Glatte PEI Platte" msgid "High temperature Plate" msgstr "Hochtemperaturplatte" msgid "Bambu Textured PEI Plate" -msgstr "Bambu strukturierte PEI-Platte" +msgstr "Bambu Strukturierte PEI Platte" -msgid "Send print job to" -msgstr "Druckauftrag senden an" +msgid "Bambu Cool Plate SuperTack" +msgstr "Bambu Kalte Druckplatte SuperTack" + +msgid "Send print job" +msgstr "Druckauftrag senden" + +msgid "On" +msgstr "An" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" +"Nicht zufrieden mit der Gruppierung der Filamente? Neu gruppieren und slicen " +"->" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" +"Externen Spulenwechsel während des Druckens für Mehrfarben-Druck manuell " +"durchführen" + +msgid "Multi-color with external" +msgstr "Mehrfarben mit externen Spulen" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" +"Ihre Filament-Gruppierungsmethode in der gesliceten Datei ist nicht optimal." + +msgid "Auto Bed Leveling" +msgstr "Automatische Bett-Nivellierung" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" +"Es wird die Ebenheit des Heizbetts überprüft. Die Nivellierung sorgt für " +"eine gleichmäßige Extrusionshöhe.\n" +"*Automatikmodus: Führen Sie eine Nivellierungsprüfung durch (ca. 10 " +"Sekunden). Überspringen, wenn die Oberfläche in Ordnung ist." msgid "Flow Dynamics Calibration" msgstr "Dynamische Flusskalibrierung" -msgid "Click here if you can't connect to the printer" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." msgstr "" -"Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können" +"Dieser Prozess bestimmt die dynamischen Flusswerte, um die Gesamt-" +"Druckqualität zu verbessern.\n" +"*Automatikmodus: Überspringen, wenn das Filament kürzlich kalibriert wurde." + +msgid "Nozzle Offset Calibration" +msgstr "Düsenversatzkalibrierung" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" +"Kalibrieren Sie die Düsenversätze, um die Druckqualität zu verbessern.\n" +"*Automatikmodus: Überprüfen Sie die Kalibrierung vor dem Drucken. " +"Überspringen, wenn nicht erforderlich." msgid "send completed" msgstr "Senden abgeschlossen" @@ -7274,60 +8719,19 @@ msgstr "Senden abgeschlossen" msgid "Error code" msgstr "Fehlercode" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Kein Login-Konto, nur Drucker im LAN-Modus werden angezeigt" - -msgid "Connecting to server" -msgstr "Verbindung zum Server wird hergestellt" - -msgid "Synchronizing device information" -msgstr "Geräteinformationen synchronisieren" - -msgid "Synchronizing device information time out" -msgstr "Zeitüberschreitung bei der Synchronisierung von Geräteinformationen" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"Druckauftrag kann nicht gesendet werden, während die Firmware des Druckers " -"aktualisiert wird" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"Der Drucker führt gerade Befehle aus. Bitte starten Sie den Druckvorgang " -"nach deren Beendigung erneut" - -msgid "The printer is busy on other print job" -msgstr "Der Drucker ist mit einem anderen Druckauftrag beschäftigt." +msgid "High Flow" +msgstr "Hoher Fluss" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s überschreitet die Anzahl der AMS-Slots. Bitte aktualisieren Sie " -"die Druckerfirmware, um die AMS-Slots-Zuordnung zu unterstützen." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament überschreitet die Anzahl der AMS-Slots. Bitte aktualisieren Sie die " -"Druckerfirmware, um die AMS-Slots-Zuordnung zu unterstützen." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Die Zuordnung von Filamenten zu AMS-Slots wurde eingerichtet. Sie können " -"oben auf ein Filament klicken, um dessen Zuordnung zu ändern" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Bitte klicken Sie oben auf jedes Filament, um den zugehörigen AMS-Slot " -"anzugeben, bevor Sie den Druckauftrag abschicken" +"Die Düsenfluss-Einstellung von %s(%s) stimmt nicht mit der Slicing-Datei(%s) " +"überein. Bitte stellen Sie sicher, dass die installierte Düse mit den " +"Einstellungen im Drucker übereinstimmt, und wählen Sie dann das " +"entsprechende Druckerprofil beim Slicen aus." #, c-format, boost-format msgid "" @@ -7346,41 +8750,15 @@ msgstr "" "aktualisieren Sie die Druckerfirmware, um die AMS-Slot-Zuordnung zu " "unterstützen." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Die Drucker-Firmware unterstützt nur die sequentielle Zuordnung von Filament " -"=> AMS-Slot." - -msgid "An SD card needs to be inserted before printing." -msgstr "Vor dem Drucken muss eine MicroSD-Karte eingelegt werden." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"Der ausgewählte Drucker (%s) ist mit dem gewählten Druckerprofil im Slicer " -"(%s) nicht kompatibel." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "" -"Für die Aufnahme eines Zeitraffers muss eine MicroSD-Karte eingelegt werden." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Der Druckauftrag kann nicht an einen Drucker gesendet werden, dessen " -"Firmware aktualisiert werden muss." - -msgid "Cannot send the print job for empty plate" -msgstr "" -"Ein Druckauftrag für eine leere Druckplatte kann nicht gesendet werden." - -msgid "This printer does not support printing all plates" -msgstr "Dieser Drucker unterstützt nicht den Druck aller Platten" +"Der ausgewählte Drucker (%s) ist mit der Druckdateikonfiguration (%s) " +"inkompatibel. Bitte passen Sie das Druckerprofil auf der Vorbereitungsseite " +"an oder wählen Sie auf dieser Seite einen kompatiblen Drucker aus." msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7390,19 +8768,32 @@ msgstr "" "Struktur keine Zeitraffervideos erstellt." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach Objekt" -"\" eingestellt ist." +"Der aktuelle Drucker unterstützt im traditionellen Modus keinen Zeitraffer " +"beim Drucken nach Objekt." msgid "Errors" msgstr "Fehler" -msgid "Please check the following:" -msgstr "Bitte überprüfen Sie Folgendes:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" +"Mehr als ein Filamenttyp wurde der gleichen externen Spule zugeordnet, was " +"Druckprobleme verursachen kann. Der Drucker wird während des Druckens nicht " +"pausieren." msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" +"Die Filamenttyp-Einstellung der externen Spule unterscheidet sich von dem " +"Filament in der Slicing-Datei." + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7419,30 +8810,8 @@ msgstr "" "Sie, ob es sich um die erforderlichen Filamente handelt. Wenn diese in " "Ordnung sind, klicken Sie auf \"Bestätigen\", um den Druck zu starten." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "Düse im Profil: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "Düse gemerkt: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Ihr Düsendurchmesser in der gesliceten Datei stimmt nicht mit der gemerkten " -"Düse überein. Wenn Sie Ihre Düse kürzlich gewechselt haben, gehen Sie zu " -"Gerät > Drucker-Teile, um die Einstellungen zu ändern." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Das Drucken von Hochtemperaturmaterial (%s Material) mit %s kann zu einer " -"Beschädigung der Düse führen" +msgid "Please check the following:" +msgstr "Bitte überprüfen Sie Folgendes:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7456,27 +8825,257 @@ msgstr "" "Druckvorgang trotzdem fortsetzen möchten." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Verbindung zum Drucker wird hergestellt. Während des Verbindungsvorgangs " +"Es wird die Ebenheit des Heizbetts überprüft. Die Nivellierung sorgt für " +"eine gleichmäßige Extrusionshöhe." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Vorsicht bei der Verwendung! Die Flusskalibrierung auf einer strukturierten " +"Dieser Prozess bestimmt die dynamischen Flusswerte, um die Gesamt-" +"Druckqualität zu verbessern." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatische Flusskalibrierung mit Micro Lidar" +msgid "Preparing print job" +msgstr "Druckauftrag vorbereiten" -msgid "Modifying the device name" -msgstr "Den Gerätenamen ändern" +msgid "The name length exceeds the limit." +msgstr "Die Namenslänge überschreitet das Limit." -msgid "Bind with Pin Code" -msgstr "Mit Pin-Code verbinden" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "Kosten %dg Filament und %d Änderungen mehr als optimale Gruppierung." -msgid "Send to Printer SD card" -msgstr "An MicroSD-Karte des Druckers senden" +msgid "nozzle" +msgstr "Düse" + +msgid "both extruders" +msgstr "beide Extruder" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" +"Tipp: Wenn Sie kürzlich die Düse Ihres Druckers gewechselt haben, gehen Sie " +"zu 'Gerät -> Druckerteile', um Ihre Düsen-Einstellung zu ändern." + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" +"The %s Durchmesser(%.1fmm) des aktuellen Druckers stimmt nicht mit der " +"Slicing-Datei (%.1fmm) überein. Bitte stellen Sie sicher, dass die " +"installierte Düse mit den Einstellungen im Drucker übereinstimmt, und wählen " +"Sie dann das entsprechende Druckerprofil beim Slicen aus." + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" +"Der aktuelle Düsendurchmesser (%.1fmm) stimmt nicht mit der Slicing-Datei " +"(%.1fmm) überein. Bitte stellen Sie sicher, dass die installierte Düse mit " +"den Einstellungen im Drucker übereinstimmt, und wählen Sie dann das " +"entsprechende Druckerprofil beim Slicen aus." + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" +"Die Härte des aktuellen Materials (%s) überschreitet die Härte von %s(%s). " +"Bitte überprüfen Sie die Düsen- oder Materialeinstellungen und versuchen Sie " +"es erneut." + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "Das Filament auf %s könnte weich werden. Bitte entladen." + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" +"Das Filament auf %s ist unbekannt und könnte weich werden. Bitte Filament " +"einstellen." + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" +"Automatisches Zuordnen zu geeignetem Filament nicht möglich. Bitte klicken " +"Sie zum manuellen Zuordnen." + +msgid "Cool" +msgstr "Kühl" + +msgid "Engineering" +msgstr "Engineering" + +msgid "High Temp" +msgstr "Hochtemperatur" + +msgid "Cool(Supertack)" +msgstr "Kühl (Supertack)" + +msgid "Click here if you can't connect to the printer" +msgstr "" +"Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Kein Login-Konto, nur Drucker im LAN-Modus werden angezeigt." + +msgid "Connecting to server..." +msgstr "Verbindung zum Server wird hergestellt" + +msgid "Synchronizing device information..." +msgstr "Geräteinformationen synchronisieren" + +msgid "Synchronizing device information timed out." +msgstr "Zeitüberschreitung bei der Synchronisierung von Geräteinformationen." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" +"Druckauftrag kann nicht gesendet werden, wenn der Drucker nicht im FDM-Modus " +"ist." + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Druckauftrag kann nicht gesendet werden, während die Firmware des Druckers " +"aktualisiert wird." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Der Drucker führt gerade Befehle aus. Bitte starten Sie den Druckvorgang " +"nach deren Beendigung erneut." + +msgid "AMS is setting up. Please try again later." +msgstr "AMS wird eingerichtet. Bitte versuchen Sie es später erneut." + +msgid "Please do not mix-use the Ext with AMS." +msgstr "Bitte verwenden Sie das Ext nicht zusammen mit AMS." + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" +"Ungültige Düseninformationen, bitte aktualisieren oder Düseninformationen " +"manuell einstellen." + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "Speicher muss vor dem Drucken über LAN eingelegt werden." + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "Speicher ist in einem abnormalen Zustand oder im Nur-Lese-Modus." + +msgid "Storage needs to be inserted before printing." +msgstr "Speicher muss vor dem Drucken eingesetzt werden." + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Der Druckauftrag kann nicht an einen Drucker gesendet werden, dessen " +"Firmware aktualisiert werden muss." + +msgid "Cannot send a print job for an empty plate." +msgstr "" +"Ein Druckauftrag für eine leere Druckplatte kann nicht gesendet werden." + +msgid "Storage needs to be inserted to record timelapse." +msgstr "Speicher muss zum Aufzeichnen von Zeitraffern eingesetzt werden." + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" +"Sie haben sowohl externe als auch AMS-Filamente für einen Extruder " +"ausgewählt. Sie müssen das externe Filament während des Druckens manuell " + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" +"TPU 90A/TPU 85A ist zu weich und unterstützt keine automatische Fluss-" +"Dynamik-Kalibrierung." + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" +"Stellen Sie die dynamische Flusskalibrierung auf 'AUS', um einen " +"benutzerdefinierten Dynamikflusswert zu aktivieren." + +msgid "This printer does not support printing all plates." +msgstr "Dieser Drucker unterstützt nicht den Druck aller Platten." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" +"Bitte führen Sie vor dem TPU Druck eine Kaltzug-Wartung am Drucker durchum " +"ein Verstopfen zu vermeiden." + +msgid "High chamber temperature is required. Please close the door." +msgstr "Hohe Kammertemperatur erforderlich. Bitte schließen Sie die Tür." + +msgid "Please refer to Wiki before use->" +msgstr "Bitte lesen Sie vor der Verwendung das Wiki->" + +msgid "Send to Printer storage" +msgstr "An Druckerspeicher senden" + +msgid "Try to connect" +msgstr "Versuchen zu verbinden" + +msgid "click to retry" +msgstr "Klicken Sie hier, um es erneut zu versuchen" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" +"Hochladen der Datei Zeitüberschreitung, bitte überprüfen Sie, ob die " +"Firmware-Version dies unterstützt." + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" +"Kein verfügbarer externer Speicher gefunden. Bitte bestätigen und erneut " +"versuchen." + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" +"Zeitüberschreitung bei der Medienfähigkeitsabfrage, bitte überprüfen Sie, ob " +"die Firmware-Version dies unterstützt." + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" +"Bitte überprüfen Sie das Netzwerk und versuchen Sie es erneut. Sie können " +"den Drucker neu starten oder aktualisieren, wenn das Problem weiterhin " +"besteht." + +msgid "Sending..." +msgstr "Senden..." + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" +"Datei-Upload zeitüberschritten. Bitte überprüfen Sie, ob die Firmware-" +"Version diesen Vorgang unterstützt oder ob der Drucker ordnungsgemäß " + +msgid "Sending failed, please try again!" +msgstr "Senden fehlgeschlagen, bitte erneut versuchen!" + +msgid "Connection failed. Click the icon to retry" +msgstr "" +"Verbindung fehlgeschlagen. Klicken Sie auf das Symbol, um es erneut zu " +"versuchen" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7486,20 +9085,17 @@ msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Der ausgewählte Drucker ist mit den gewählten Druckerprofilen nicht " -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "" -"Bevor Sie die Datei an die SD-Karte des Druckers senden können, muss eine SD-" -"Karte eingelegt werden." +msgid "Storage needs to be inserted before send to printer." +msgstr "Speicher muss vor dem Senden an den Drucker eingesetzt werden." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Der Drucker muss sich im selben LAN befinden wie Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "" -"Der Drucker unterstützt nicht das Senden an die MicroSD-Karte des Druckers." +msgid "The printer does not support sending to printer storage." +msgstr "Der Drucker unterstützt das Senden an den Druckerspeicher nicht." msgid "Slice ok." -msgstr "Slice ok." +msgstr "Slicing erfolgreich." msgid "View all Daily tips" msgstr "Zeige alle täglichen Tipps" @@ -7556,7 +9152,7 @@ msgstr "Anmeldung fehlgeschlagen. Bitte überprüfen Sie den Pin-Code." msgid "Log in printer" msgstr "Drucker anmelden" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "" "Möchten Sie sich bei diesem Drucker mit Ihrem aktuellen Konto anmelden?" @@ -7570,10 +9166,10 @@ msgid "Terms and Conditions" msgstr "Allgemeine Geschäftsbedingungen" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Vielen Dank für den Kauf eines Bambu Lab Geräts. Bevor Sie Ihr Bambu Lab " @@ -7604,11 +9200,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "In der 3D-Druck-Community lernen wir von den Erfolgen und Misserfolgen der " "anderen, um unsere eigenen Slicing-Parameter und Einstellungen anzupassen. " @@ -7664,7 +9260,7 @@ msgstr "" "Parameter zurückzusetzen." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Ein Reinigungsturm ist für den gewählten Zeitraffer-Modus erforderlich. Ohne " @@ -7672,7 +9268,30 @@ msgstr "" "Sie den Reinigungsturm deaktivieren möchten?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Die Aktivierung sowohl der präzisen Z-Höhe als auch des Reinigungsturms kann " +"die Größe des Reinigungsturms erhöhen. Möchten Sie trotzdem aktivieren?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" +"Ein Reinigungsturm ist für die Erkennung von Klumpen erforderlich. Ohne " +"Reinigungsturm kann es zu Fehlern am Modell kommen. Sind Sie sicher, dass " +"Sie den Reinigungsturm deaktivieren möchten?" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" +"Reinigungsturm ist für die Erkennung von Klumpen erforderlich. Ohne " +"Reinigungsturm kann es zu Fehlern am Modell kommen. Möchten Sie die " +"Klumpenerkennung trotzdem aktivieren?" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "Für den gewählten Zeitraffermodus ist ein Reinigungsturm erforderlich. Ohne " @@ -7683,18 +9302,25 @@ msgid "Still print by object?" msgstr "Trotzdem nach Objekt drucken?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Wir haben einen experimentellen Stil \"Baum schmal\" hinzugefügt, der ein " -"geringeres Stützvolumen benötigt, aber dafür eine geringere Stärke " -"aufweist.\n" -"Wir empfehlen folgende Einstellungen: 0 Oberflächenschichten, 0 oberer " -"Abstand, 2 Wände." +"Nicht lösliche Stützmaterialien werden für die Stützbasis nicht empfohlen.\n" +"Möchten Sie sie trotzdem für die Stützbasis verwenden?\n" msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Wenn Sie Stützmaterial für die Stützschnittstelle verwenden, empfehlen wir " +"folgende Einstellungen:\n" +"0 obere Z-Distanz, 0 Schnittstellenabstand, verschachteltes rechtwinkliges " +"Muster und unabhängige Stützhöhe deaktivieren." + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7703,27 +9329,18 @@ msgstr "" "Nein - Diese Einstellungen für mich nicht ändern." msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Für die Stile \"Baumstützen Stark\" und \"Baumstützen Hybrid\" empfehlen wir " -"die folgenden Einstellungen: Mindestens 2 Schnittstellschichten, mindestens " -"0,1 mm oberer Z-Abstand oder die Verwendung von Stützmaterialien bei der " -"Schnittstelle." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Bei Verwendung von Supportmaterial für die Supportoberfläche empfehlen wir " -"die folgenden Einstellungen:\n" -" 0 Abstand nach oben (top z distance), 0 Abstand zwischen Oberflächen " -"(interface spacing), konzentrisches Muster und deaktivieren Sie " -"dieunabhängige Einstellung der Support-Lagenhöhe (independent support layer " -"height)." +"Wenn Sie lösliches Material für die Stützschnittstelle verwenden, empfehlen " +"wir folgende Einstellungen:\n" +"0 obere Z-Distanz, 0 Schnittstellenabstand, verschachteltes rechtwinkliges " +"Muster, unabhängige Stützhöhe deaktivieren \n" +"und lösliche Materialien sowohl für Stützschnittstelle als auch Stützbasis " +"verwenden." msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7738,6 +9355,21 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Sind Sie sicher, dass Sie diese Option aktivieren möchten?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Infill-Muster sind in der Regel so konzipiert, dass sie eine automatische " +"Drehung ermöglichen, um einen ordnungsgemäßen Druck zu gewährleisten und die " +"beabsichtigten Effekte zu erzielen (z. B. Gyroid, Cubic). Das Drehen des " +"aktuellen spärlichen Infill-Musters kann zu unzureichender Unterstützung " +"führen. Bitte gehen Sie vorsichtig vor und überprüfen Sie gründlich auf " +"mögliche Druckprobleme. Sind Sie sicher, dass Sie diese Option aktivieren " +"möchten?" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7747,13 +9379,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Die Schichthöhe überschreitet das Limit in Druckereinstellungen -> Extruder -" "> Schichthöhenlimits. Dies kann zu Problemen mit der Druckqualität führen." -msgid "Adjust to the set range automatically? \n" -msgstr "Automatisch an den eingestellten Bereich anpassen? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Automatisch an den eingestellten Bereich anpassen?\n" msgid "Adjust" msgstr "Anpassen" @@ -7763,9 +9395,9 @@ msgstr "Ignorieren" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "Experimentelle Funktion: Filament beim Filamentwechsel weiter zurückziehen " "und abschneiden, um den Flush zu minimieren. Obwohl dies den Flush deutlich " @@ -7774,9 +9406,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Experimentelle Funktion: Filament beim Filamentwechsel weiter zurückziehen " "und abschneiden, um den Flush zu minimieren. Obwohl dies den Flush deutlich " @@ -7795,6 +9427,83 @@ msgstr "" "auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" "\"Timelapse Wischturm\" wählen." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Es wird eine Kopie der aktuellen Systemvoreinstellung erstellt, die von der " +"Systemvoreinstellung abgekoppelt wird." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Die aktuelle benutzerdefinierte Voreinstellung wird von der übergeordneten " +"Systemvoreinstellung abgekoppelt." + +msgid "Modifications to the current profile will be saved." +msgstr "Änderungen am aktuellen Profil werden gespeichert." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Diese Auswahl ist nicht rückgängig zu machen.\n" +"Möchten Sie fortfahren?" + +msgid "Detach preset" +msgstr "Voreinstellung abkoppeln" + +msgid "This is a default preset." +msgstr "Das ist ein Standardvoreinstellung." + +msgid "This is a system preset." +msgstr "Das ist eine Systemvoreinstellung." + +msgid "Current preset is inherited from the default preset." +msgstr "Aktuelle Voreinstellung ist von der Standardvoreinstellung abgeleitet." + +msgid "Current preset is inherited from" +msgstr "Aktuelle Voreinstellung ist abgeleitet von" + +msgid "It can't be deleted or modified." +msgstr "Es kann nicht gelöscht oder geändert werden." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Alle Änderungen sollten als neue Voreinstellung gespeichert werden, die von " +"dieser abgeleitet ist." + +msgid "To do that please specify a new name for the preset." +msgstr "Bitte geben Sie einen neuen Namen für die Voreinstellung an." + +msgid "Additional information:" +msgstr "Zusätzliche Informationen:" + +msgid "vendor" +msgstr "Hersteller" + +msgid "printer model" +msgstr "Druckermodell" + +msgid "default print profile" +msgstr "Standard-Druckprofil" + +msgid "default filament profile" +msgstr "Standard-Filamentprofil" + +msgid "default SLA material profile" +msgstr "Standard-SLA-Materialprofil" + +msgid "default SLA print profile" +msgstr "Standard-SLA-Druckprofil" + +msgid "full profile name" +msgstr "vollständiger Profilname" + +msgid "symbolic profile name" +msgstr "symbolischer Profilname" + msgid "Line width" msgstr "Breite der Linie" @@ -7862,15 +9571,27 @@ msgstr "Druckbasis (Raft)" msgid "Support filament" msgstr "Supportfilament" +msgid "Support ironing" +msgstr "Unterstützungs-Glätten" + msgid "Tree supports" msgstr "Baumstützen" -msgid "Skirt" -msgstr "Saum" +msgid "Multimaterial" +msgstr "Multimaterial" msgid "Prime tower" msgstr "Reinigungsturm" +msgid "Filament for Features" +msgstr "Filament für Funktionen" + +msgid "Ooze prevention" +msgstr "Ooze-Prävention" + +msgid "Skirt" +msgstr "Saum" + msgid "Special mode" msgstr "Spezialmodus" @@ -7878,7 +9599,7 @@ msgid "G-code output" msgstr "G-Code-Ausgabe" msgid "Post-processing Scripts" -msgstr "Post-Processing Scripts" +msgstr "Nachbearbeitungsskripte" msgid "Notes" msgstr "Notizen" @@ -7924,46 +9645,57 @@ msgstr "" "Empfohlener Düsentemperaturbereich für dieses Filament. 0 bedeutet nicht " "gesetzt" +msgid "Flow ratio and Pressure Advance" +msgstr "Flussverhältnis und Pressure Advance" + msgid "Print chamber temperature" msgstr "Druckkammertemperatur" msgid "Print temperature" msgstr "Drucktemperatur" -msgid "Nozzle" -msgstr "Düse" - msgid "Nozzle temperature when printing" msgstr "Düsentemperatur beim Drucken" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Kalte Druckplatte (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Dies ist die Betttemperatur, wenn die kalte Druckplatte SuperTack " +"installiert ist. Ein Wert von 0 bedeutet, dass das Filament auf der kalten " +"Druckplatte SuperTack nicht unterstützt wird." + +msgid "Cool Plate" msgstr "Kalte Druckplatte" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Dies ist die Betttemperatur, wenn die kalte Druckplatte installiert ist. Ein " "Wert von 0 bedeutet, dass das Filament auf der kalten Druckplatte nicht " "unterstützt." -msgid "Textured Cool plate" -msgstr "Texturierte kalte Druckplatte" +msgid "Textured Cool Plate" +msgstr "Strukturierte kalte Druckplatte" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" "Dies ist die Betttemperatur, wenn die kalte Druckplatte installiert ist. Ein " "Wert von 0 bedeutet, dass das Filament auf der texturierten kalten " "Druckplatte nicht unterstützt wird." -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "Technische Druckplatte" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Dies ist die Betttemperatur, wenn die technische Druckplatte installiert " "wird. Ein Wert von 0 bedeutet, dass das Filament auf der technischen " @@ -7973,9 +9705,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Glatte PEI-Platte / Hochtemperaturplatte" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Dies ist die Betttemperatur, wenn die glatte PEI-Platte installiert ist. Ein " "Wert von 0 bedeutet, dass das Filament auf der glatten PEI-/Hochtemperatur " @@ -7985,8 +9717,8 @@ msgid "Textured PEI Plate" msgstr "Texturierte PEI-Platte" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Betttemperatur, wenn die texturierte PEI-Platte installiert ist. 0 bedeutet, " "dass das Filament nicht auf der texturierten PEI-Platte unterstützt wird." @@ -7994,9 +9726,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Volumetrische Geschwindigkeitsbegrenzung" -msgid "Cooling" -msgstr "Kühlung" - msgid "Cooling for specific layer" msgstr "Kühlung für eine bestimmte Schicht" @@ -8046,25 +9775,34 @@ msgstr "Filament Start G-Code" msgid "Filament end G-code" msgstr "Filament End G-Code" -msgid "Multimaterial" -msgstr "Multimaterial" - msgid "Wipe tower parameters" msgstr "Reinigungsturm-Parameter" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "Multi-Filament" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Toolchange-Parameter bei Single-Extruder-MM-Druckern" -msgid "Ramming settings" -msgstr "Ramming-Einstellungen" +msgid "Set" +msgstr "Festlegen" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Toolchange-Parameter bei Multi-Extruder-MM-Druckern" +msgid "Dependencies" +msgstr "Abhängigkeiten" + +msgid "Compatible printers" +msgstr "Kompatible Drucker" + +msgid "Compatible process profiles" +msgstr "Kompatible Prozessprofile" + msgid "Printable space" msgstr "Druckbarer Raum" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Ungültiger Wert für Parameter %1%: %2% angegeben" @@ -8087,7 +9825,7 @@ msgstr "Adaptives Bett Gitter" msgid "Accessory" msgstr "Zubehör" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "Maschinen G-Code" msgid "Machine start G-code" @@ -8105,9 +9843,12 @@ msgstr "G-Code vor dem Schichtwechsel" msgid "Layer change G-code" msgstr "Schichtwechsel G-Code" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "Zeitraffer G-Code" +msgid "Clumping Detection G-code" +msgstr "Klumpenerkennungs-G-Code" + msgid "Change filament G-code" msgstr "Filamentwechsel G-Code" @@ -8126,6 +9867,12 @@ msgstr "Bewegungseinstellung" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "Resonanzvermeidung" + +msgid "Resonance Avoidance Speed" +msgstr "Resonanzvermeidungs-Geschwindigkeit" + msgid "Speed limitation" msgstr "Geschwindigkeitsbegrenzung" @@ -8135,20 +9882,44 @@ msgstr "Beschleunigungsbegrenzung" msgid "Jerk limitation" msgstr "Jerkbegrenzung" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Single-Extruder-Multimaterial-Einstellung" +msgid "Number of extruders of the printer." +msgstr "Anzahl der Extruder des Druckers." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Single-Extruder-Multimaterial ist ausgewählt, \n" +"und alle Extruder müssen denselben Durchmesser haben.\n" +"Möchten Sie den Durchmesser für alle Extruder auf den Wert des ersten " +"Extruder-Düsendurchmessers ändern?" + +msgid "Nozzle diameter" +msgstr "Düsendurchmesser" + msgid "Wipe tower" msgstr "Reinigungsturm" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Single-Extruder-Multimaterial-Parameter" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Dies ist ein Single-Extruder-Multimaterial-Drucker, die Durchmesser aller " +"Extruder werden auf den neuen Wert gesetzt. Möchten Sie fortfahren?" + msgid "Layer height limits" msgstr "Höhenbegrenzungen für Schichten" -msgid "Lift Z Enforcement" -msgstr "Z-Höhe einhalten" +msgid "Z-Hop" +msgstr "Z-Hop" msgid "Retraction when switching material" msgstr "Rückzug bei Materialwechsel" @@ -8165,6 +9936,17 @@ msgstr "" msgid "Firmware Retraction" msgstr "Filament Rückzug durch Firmware" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" +"Der Wechsel zu einem Drucker mit anderen Extrudertypen oder -anzahlen " +"verwirft oder setzt Änderungen an extruder- oder multi-düsenbezogenen " +"Parametern zurück." + +msgid "Use Modified Value" +msgstr "Modifizierten Wert verwenden" + msgid "Detached" msgstr "Losgelöst" @@ -8176,7 +9958,7 @@ msgstr "" "%d Filament Profil und %d Prozess Profil sind diesem Drucker zugeordnet. " "Diese Profile werden gelöscht, wenn der Drucker gelöscht wird." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "" "Voreinstellungen, die von anderen Voreinstellungen geerbt wurden, können " "nicht gelöscht werden!" @@ -8196,25 +9978,17 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "Das folgende Profil wird ebenfalls gelöscht." msgstr[1] "Die folgenden Profile werden ebenfalls gelöscht." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Sind Sie sicher, dass Sie das ausgewählte Profil löschen möchten? \n" -"Wenn das Profil einem Filament entspricht, das derzeit auf Ihrem Drucker " -"verwendet wird, setzen Sie bitte die Filamentinformationen für diesen Slot " -"zurück." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Sind sie sicher, dass sie das ausgewählte Profil %1% wollen?" -msgid "All" -msgstr "Alle" +#, c-format, boost-format +msgid "Left: %s" +msgstr "Links: %s" -msgid "Set" -msgstr "Festlegen" +#, c-format, boost-format +msgid "Right: %s" +msgstr "Rechts: %s" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8310,8 +10084,8 @@ msgstr "" "die folgenden nicht gespeicherten Änderungen:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "Sie haben einige Einstellungen des Profils \"%1%\" geändert. " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Sie haben einige Einstellungen des Profils \"%1%\" geändert." msgid "" "\n" @@ -8344,9 +10118,6 @@ msgstr "" msgid "Extruders count" msgstr "Anzahl der Extruder" -msgid "General" -msgstr "Allgemein" - msgid "Capabilities" msgstr "Fähigkeiten" @@ -8412,6 +10183,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Modellname" +msgid "Description:" +msgstr "Beschreibung:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Aktualisieren" @@ -8422,24 +10196,21 @@ msgstr "Eine neue Version ist verfügbar" msgid "Configuration update" msgstr "Konfigurationsupdate" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "" "Ein neues Konfigurationspaket ist verfügbar. Möchten Sie es installieren?" -msgid "Description:" -msgstr "Beschreibung:" - msgid "Configuration incompatible" msgstr "Konfiguration nicht kompatibel" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "" "das Konfigurationspaket ist mit der aktuellen Anwendung nicht kompatibel." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Das Konfigurationspaket ist mit der aktuellen Anwendung nicht kompatibel.\n" "%s wird das Konfigurationspaket aktualisieren, andernfalls wird es nicht " @@ -8449,9 +10220,6 @@ msgstr "" msgid "Exit %s" msgstr "%s beenden" -msgid "the Configuration package is incompatible with current APP." -msgstr "Das Konfigurationspaket ist mit der aktuellen APP nicht kompatibel." - msgid "Configuration updates" msgstr "Konfigurationsupdates" @@ -8461,59 +10229,254 @@ msgstr "Keine Updates verfügbar." msgid "The configuration is up to date." msgstr "Die Konfiguration ist auf dem neuesten Stand." -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "Öffnen Sie das Wiki für weitere Informationen >" + +msgid "OBJ file import color" +msgstr "Obj-Datei Importfarbe" + +msgid "Some faces don't have color defined." +msgstr "Einige Flächen haben keine definierte Farbe." + +msgid "MTL file exist error, could not find the material:" +msgstr "" +"Fehler bei der Existenz der mtl-Datei, Material konnte nicht gefunden werden:" + +#, fuzzy +msgid "Please check OBJ or MTL file." +msgstr "Bitte überprüfen Sie die obj- oder mtl-Datei." msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "Anzahl der Farben angeben:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" +"Geben Sie die Anzahl erneut ein oder klicken Sie auf die " +"Anpassungsschaltfläche, um sie zu ändern" msgid "Recommended " -msgstr "Recommended " +msgstr "Empfohlen " -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "Ansicht" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "Aktuelle Filamentfarben" + +msgid "Matching" +msgstr "Abgleichen" + +msgid "Quick set" +msgstr "Schnelleinstellung" msgid "Color match" -msgstr "Color match" +msgstr "Farbabgleich" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "Ungefähre Farbabstimmung." msgid "Append" -msgstr "Append" +msgstr "Anhängen" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "An vorhandene Filamente anhängen" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "Zurücksetzen der zugeordneten Extruder." -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "Hinweis" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." +"Die Farbe wurde ausgewählt, Sie können OK wählen \n" +"um fortzufahren oder sie manuell anzupassen." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." +"Das Synchronisieren von AMS-Filamenten verwirft Ihre geänderten, aber nicht " +"gespeicherten Filamentvoreinstellungen.\n" +"Sind Sie sicher, dass Sie fortfahren möchten?" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "Original" + +msgid "After mapping" +msgstr "Nach dem Zuordnen" + +msgid "After overwriting" +msgstr "Nach dem Überschreiben" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "Platte" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" +"Der angeschlossene Drucker stimmt nicht mit dem aktuell ausgewählten Drucker " +"überein. Bitte ändern Sie den ausgewählten Drucker." + +msgid "Mapping" +msgstr "Zuordnen" + +msgid "Overwriting" +msgstr "Überschreiben" + +msgid "Reset all filament mapping" +msgstr "Alle Filamentzuordnungen zurücksetzen" + +msgid "Left Extruder" +msgstr "linker Extruder" + +msgid "(Recommended filament)" +msgstr "(empfohlenes Filament)" + +msgid "Right Extruder" +msgstr "rechter Extruder" + +msgid "Advanced Options" +msgstr "Erweiterte Optionen" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" +"Überprüfe die Ebenheit des Heizbetts. Das Nivellieren sorgt für eine " +"einheitliche Extrusionshöhe.\n" +"*Automatischer Modus: Zuerst nivellieren (ca. 10 Sekunden).Überspringen, " +"wenn die Oberfläche in Ordnung ist." + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" +"Kalibrieren Sie die Düsenversätze, um die Druckqualität zu verbessern.\n" +"*Automatischer Modus: Überprüfen Sie die Kalibrierung vor dem Drucken; " +"überspringen Sie sie, wenn sie nicht erforderlich ist." + +msgid "Use AMS" +msgstr "AMS verwenden" + +msgid "Tip" +msgstr "Tipp" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" +"Nur Filamenttyp und Farbe synchronisieren, nicht einschließlich AMS-Slot-" +"Informationen." + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" +"Ersetzen Sie die Filamentliste des Projekts nacheinander basierend auf den " +"Filamenten des Druckers. Unbenutzte Druckerfilamente werden automatisch am " +"Ende der Liste hinzugefügt." + +msgid "Advanced settings" +msgstr "Erweiterte Einstellungen" + +msgid "Add unused AMS filaments to filaments list." +msgstr "Unbenutzte AMS-Filamente zur Filamentliste hinzufügen." + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" +"Automatisches Zusammenführen derselben Farben im Modell nach dem Zuordnen." + +msgid "After being synced, this action cannot be undone." +msgstr "" +"Nach der Synchronisierung kann diese Aktion nicht rückgängig gemacht werden." + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" +"Nach der Synchronisierung werden die Filamentvoreinstellungen und Farben des " +"Projekts durch die zugeordneten Filamenttypen und -farben ersetzt. Diese " +"Aktion kann nicht rückgängig gemacht werden." + +msgid "Are you sure to synchronize the filaments?" +msgstr "Sind Sie sicher, dass Sie die Filamente synchronisieren möchten?" + +msgid "Synchronize now" +msgstr "Jetzt synchronisieren" + +msgid "Synchronize Filament Information" +msgstr "Filamentinformationen synchronisieren" + +msgid "Add unused filaments to filaments list." +msgstr "Unbenutzte Filamente zur Filamentliste hinzufügen." + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" +"Nur Filamenttyp und Farbe synchronisieren, nicht einschließlich Slot-" +"Informationen." + +msgid "Ext spool" +msgstr "Externer Spule" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" +"Bitte überprüfen Sie, ob der Düsentyp des Geräts mit dem voreingestellten " +"Düsentyp übereinstimmt." + +msgid "Storage is not available or is in read-only mode." +msgstr "Speicher ist nicht verfügbar oder im Nur-Lese-Modus." + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Der ausgewählte Drucker (%s) ist mit dem gewählten Druckerprofil im Slicer " +"(%s) nicht kompatibel." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach Objekt" +"\" eingestellt ist." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" +"Sie haben gleichzeitig externes und AMS-Filament in einem Extruder Sie " +"müssen das externe Filament manuell ändern." + +msgid "Successfully synchronized nozzle information." +msgstr "Düseninformationen erfolgreich synchronisiert." + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "Düsen und AMS Nummer erfolgreich synchronisiert." + +msgid "Continue to sync filaments" +msgstr "Weiter mit dem Synchronisieren der Filamente" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "Abbrechen" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "Farbe und Typ des Filaments erfolgreich vom Drucker synchronisiert." + +msgctxt "FinishSyncAms" +msgid "OK" +msgstr "OK" msgid "Ramming customization" msgstr "Ramming-Anpassung" @@ -8537,37 +10500,29 @@ msgstr "" "Dies ist eine Einstellung für Experten, eine falsche Einstellung führt " "wahrscheinlich zu Verstopfungen, schleifendem Extruderrad, usw." -msgid "Total ramming time" -msgstr "Summe der Ramming-Zeit" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" +"Um eine konstante Flussrate zu erhalten, halten Sie %1% gedrückt, während " +"Sie ziehen." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "Summe Ramming" -msgid "Total rammed volume" -msgstr "Summe des Ramming-Volumens" +msgid "Volume" +msgstr "Volumen" -msgid "Ramming line width" -msgstr "Ramming-Linienbreite" - -msgid "Ramming line spacing" -msgstr "Ramming-Linienabstand" - -msgid "Auto-Calc" -msgstr "Automatisch berechnen" - -msgid "Re-calculate" -msgstr "Neu berechnen" - -msgid "Flushing volumes for filament change" -msgstr "Reinigungsvolumen für Filamentwechsel" +msgid "Ramming line" +msgstr "Ramming-Linie" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca würde jedes Mal die Reinigungsvolumen neu berechnen, wenn sich die " -"Farbe des Filaments ändert. Sie können die automatische Berechnung in Orca " -"Slicer > Einstellungen deaktivieren" +"Orca würde Ihre Reinigungsvolumen jedes Mal neu berechnen, wenn sich die " +"Filamentfarbe oder die Filamente ändern. Sie können die automatische " +"Neuberechnung in Snapmaker Orca > Einstellungen deaktivieren " msgid "Flushing volume (mm³) for each filament pair." msgstr "Reinigungsvolumen (mm³) für jedes Filamentpaar." @@ -8580,23 +10535,23 @@ msgstr "Anmerkung: Reinigungsvolumen im Bereich [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Der Multiplikator sollte im Bereich [%.2f, %.2f] liegen." +msgid "Re-calculate" +msgstr "Neu berechnen" + +msgid "Left extruder" +msgstr "Linker Extruder" + +msgid "Right extruder" +msgstr "Rechter Extruder" + msgid "Multiplier" msgstr "Multiplikator " -msgid "unloaded" -msgstr "entladen" +msgid "Flushing volumes for filament change" +msgstr "Reinigungsvolumen für Filamentwechsel" -msgid "loaded" -msgstr "geladen" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Von" - -msgid "To" -msgstr "Zu" +msgid "Please choose the filament colour" +msgstr "Bitte wählen Sie die Filamentfarbe" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8614,7 +10569,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Fehlendes BambuSource-Komponente für das Abspielen von Medien registriert! " "Bitte installieren Sie BambuStudio erneut oder suchen Sie nach " @@ -8630,7 +10585,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "Ihr System fehlt H.264-Codecs für GStreamer, die zum Abspielen von Videos " @@ -8662,12 +10617,6 @@ msgstr "Liste der Objekte" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importiere Geometriedaten aus STL/STEP/3MF/OBJ/AMF-Dateien" -msgid "⌘+Shift+G" -msgstr "⌘+Umschalttaste+G" - -msgid "Ctrl+Shift+G" -msgstr "Strg+Umschalt+G" - msgid "Paste from clipboard" msgstr "Aus Zwischenablage einfügen" @@ -8683,70 +10632,45 @@ msgstr "Liste der Tastaturkürzel anzeigen" msgid "Global shortcuts" msgstr "Globale Tastaturkürzel" -msgid "Rotate View" -msgstr "Drehen der Ansicht" - msgid "Pan View" msgstr "Pan-Ansicht" -msgid "Mouse wheel" -msgstr "Mausrad" +msgid "Rotate View" +msgstr "Drehen der Ansicht" msgid "Zoom View" msgstr "Ansicht zoomen" -msgid "Shift+A" -msgstr "Umschalt+A" - -msgid "Shift+R" -msgstr "Umschalt+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Diese Funktion richtet ausgewählte Objekte oder alle Objekte automatisch " "aus. Wenn es ausgewählte Objekte gibt, werden nur die ausgewählten Objekte " -"ausgerichtet. Andernfalls werden alle Objekte auf der aktuellen Druckplatte " +"ausgerichtet. Andernfalls werden alle Objekte auf das aktuelle Projekt " "ausgerichtet." -msgid "Shift+Tab" -msgstr "Umschalt+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "" +"Diese Funktion richtet alle Objekte auf der aktuellen Druckplatte " +"ausgerichtet." msgid "Collapse/Expand the sidebar" msgstr "Seitenleiste zu-/aufklappen" -msgid "⌘+Any arrow" -msgstr "⌘+beliebiger Pfeil" +msgid "Any arrow" +msgstr "Beliebiger Pfeil" msgid "Movement in camera space" msgstr "Bewegung im Kameraraum" -msgid "⌥+Left mouse button" -msgstr "⌥+Linke Maustaste" - msgid "Select a part" msgstr "Teil auswählen" -msgid "⌘+Left mouse button" -msgstr "⌘+Linke Maustaste" - msgid "Select multiple objects" msgstr "Mehrere Objekte auswählen" -msgid "Ctrl+Any arrow" -msgstr "Strg + beliebige Pfeiltaste" - -msgid "Alt+Left mouse button" -msgstr "Alt + Linke Maustaste" - -msgid "Ctrl+Left mouse button" -msgstr "Strg + Linke Maustaste" - -msgid "Shift+Left mouse button" -msgstr "Umschalt+Linke Maustaste" - msgid "Select objects by rectangle" msgstr "Objekte per Rechteck auswählen" @@ -8774,9 +10698,6 @@ msgstr "Pfeil rechts" msgid "Move selection 10 mm in positive X direction" msgstr "Auswahl 10 mm in positiver X-Richtung verschieben" -msgid "Shift+Any arrow" -msgstr "Umschalt+beliebige Pfeiltaste" - msgid "Movement step set to 1 mm" msgstr "Bewegungsschritt auf 1 mm eingestellt" @@ -8810,17 +10731,23 @@ msgstr "Alle Objekte auswählen" msgid "Gizmo move" msgstr "Bewegen" +msgid "Gizmo rotate" +msgstr "Rotieren" + msgid "Gizmo scale" msgstr "Skalieren" -msgid "Gizmo rotate" -msgstr "Rotieren" +msgid "Gizmo place face on bed" +msgstr "Fläche auf druckbett platzieren" msgid "Gizmo cut" msgstr "Trennen" -msgid "Gizmo Place face on bed" -msgstr "Fläche auf Druckbett platzieren" +msgid "Gizmo mesh boolean" +msgstr "Gizmo mesh-boolesche" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "FDM Pinsel auf Fuzzy Oberfläche" msgid "Gizmo SLA support points" msgstr "SLA Stützpunkte" @@ -8828,8 +10755,17 @@ msgstr "SLA Stützpunkte" msgid "Gizmo FDM paint-on seam" msgstr "FDM Naht aufmalen" -msgid "Gizmo Text emboss / engrave" -msgstr "Text prägen / gravieren" +msgid "Gizmo text emboss/engrave" +msgstr "Text prägen/gravieren" + +msgid "Gizmo measure" +msgstr "Gizmo messen" + +msgid "Gizmo assemble" +msgstr "Gizmo Zusammenbauen" + +msgid "Gizmo brim ears" +msgstr "Gizmo mausohren" msgid "Zoom in" msgstr "Vergrößern" @@ -8846,32 +10782,20 @@ msgstr "Druckplatte" msgid "Move: press to snap by 1mm" msgstr "Verschieben: Drücken, um in 1 mm einzurasten" -msgid "⌘+Mouse wheel" -msgstr "⌘+Mausrad" - msgid "Support/Color Painting: adjust pen radius" msgstr "Stützen/Farbmalen: Stiftradius einstellen" -msgid "⌥+Mouse wheel" -msgstr "⌥+Mausrad" - msgid "Support/Color Painting: adjust section position" msgstr "Stützen/Farbmalen: Position des Abschnitts anpassen" -msgid "Ctrl+Mouse wheel" -msgstr "Strg + Mausrad" - -msgid "Alt+Mouse wheel" -msgstr "Alt + Mausrad" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Extrudernummer für die Objekte und Teile einstellen" -msgid "Delete objects, parts, modifiers " -msgstr "Objekte, Teile, Modifikatoren löschen " +msgid "Delete objects, parts, modifiers" +msgstr "Objekte, Teile, Modifikatoren löschen" msgid "Select the object/part and press space to change the name" msgstr "" @@ -8902,15 +10826,12 @@ msgstr "Horizontaler Schieberegler - Aktiven Schieber nach rechts bewegen" msgid "On/Off one layer mode of the vertical slider" msgstr "Ein/Aus Einschichtmodus des vertikalen Schiebereglers" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Ein-/Ausblenden des G-Code-Fensters" msgid "Move slider 5x faster" msgstr "Schieberegler 5x schneller bewegen" -msgid "Shift+Mouse wheel" -msgstr "Umschalt+Mausrad" - msgid "Horizontal slider - Move to start position" msgstr "Horizontaler Schieberegler - Zur Startposition bewegen" @@ -8921,7 +10842,7 @@ msgid "Release Note" msgstr "Hinweis zur Veröffentlichung" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "Version %s Update-Informationen:" msgid "Network plug-in update" @@ -8934,7 +10855,7 @@ msgstr "" "Slicer zu aktualisieren." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "" "Ein neues Netzwerk-Plug-in (%s) verfügbar, möchten Sie es installieren?" @@ -8944,63 +10865,36 @@ msgstr "Neue Version von Snapmaker Orca" msgid "Skip this Version" msgstr "Überspringe diese Version" -msgid "Done" -msgstr "Erledigt" - -msgid "resume" -msgstr "Fortsetzen" - -msgid "Resume Printing" -msgstr "Druck fortsetzen" - -msgid "Resume Printing(defects acceptable)" -msgstr "Druck fortsetzen (Fehler akzeptabel)" - -msgid "Resume Printing(problem solved)" -msgstr "Druck fortsetzen (Problem gelöst)" - -msgid "Stop Printing" -msgstr "Druck abbrechen" - -msgid "Check Assistant" -msgstr "Assistent überprüfen" - -msgid "Filament Extruded, Continue" -msgstr "Filament extrudiert, fortsetzen" - -msgid "Not Extruded Yet, Retry" -msgstr "Noch nicht extrudiert, erneut versuchen" - -msgid "Finished, Continue" -msgstr "Fertig, fortsetzen" - -msgid "Load Filament" -msgstr "Laden" - -msgid "Filament Loaded, Resume" -msgstr "Filament geladen, fortsetzen" - -msgid "View Liveview" -msgstr "Live-Ansicht anzeigen" - msgid "Confirm and Update Nozzle" msgstr "Bestätigen und Düse aktualisieren" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN-Verbindung fehlgeschlagen (Senden einer Druckdatei)" +msgid "Connect the printer using IP and access code" +msgstr "Verbinden Sie den Drucker mit IP und Zugangscode" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." msgstr "" -"Schritt 1: Vergewissern Sie sich, dass Snapmaker Orca und Ihr Drucker sich im " -"selben LAN befinden." +"Versuchen Sie die folgenden Methoden, um die Verbindungsparameter zu " +"aktualisieren und eine erneute Verbindung zum Drucker herzustellen." + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" +"1. Bitte bestätigen Sie, dass sich Snapmaker Orca und Ihr Drucker im selben LAN " msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." msgstr "" -"Schritt 2: Wenn die IP und der Zugriffscode unten von den tatsächlichen " -"Werten Ihres Druckers abweichen, korrigieren Sie diese bitte." +"2. Wenn die unten stehende IP und der Zugriffscode von den tatsächlichen " +"Werten auf Ihrem Drucker abweichen, korrigieren Sie diese bitte." + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." +msgstr "" +"3. Bitte holen Sie die Geräte-SN von der Druckerseite; sie ist normalerweise " +"in den Geräteinformationen auf dem Druckerbildschirm zu finden." msgid "IP" msgstr "IP" @@ -9008,18 +10902,43 @@ msgstr "IP" msgid "Access Code" msgstr "Zugangscode" +msgid "Printer model" +msgstr "Druckermodell" + +msgid "Printer name" +msgstr "Druckername" + msgid "Where to find your printer's IP and Access Code?" msgstr "Wo finde ich die IP-Adresse und den Zugriffscode meines Druckers?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "Schritt 3: Pingen Sie die IP-Adresse, um Paketverlust und Latenz zu " +msgid "Connect" +msgstr "Verbinden" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Manuelle Einrichtung" msgid "IP and Access Code Verified! You may close the window" msgstr "IP und Zugriffscode verifiziert! Sie können das Fenster schließen" +msgid "connecting..." +msgstr "Verbindung wird hergestellt..." + +msgid "Failed to connect to printer." +msgstr "Verbindung zum Drucker fehlgeschlagen." + +msgid "Failed to publish login request." +msgstr "Veröffentlichung des Anmeldeantrags fehlgeschlagen." + +msgid "The printer has already been bound." +msgstr "Der Drucker wurde bereits gebunden." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "Der Druckermodus ist falsch, bitte wechseln Sie auf LAN Only." + +msgid "Connecting to printer... The dialog will close later" +msgstr "" +"Verbindung zum Drucker wird hergestellt... Der Dialog wird später geschlossen" + msgid "Connection failed, please double check IP and Access Code" msgstr "Verbindung fehlgeschlagen, bitte überprüfen Sie IP und Zugriffscode" @@ -9030,31 +10949,54 @@ msgstr "" "Verbindung fehlgeschlagen! Wenn Ihre IP und Ihr Zugriffscode korrekt sind, \n" "gehen Sie bitte zu Schritt 3, um Netzwerkprobleme zu beheben" +msgid "Connection failed! Please refer to the wiki page." +msgstr "Verbindung fehlgeschlagen! Bitte beziehen Sie sich auf die Wiki-Seite." + +msgid "sending failed" +msgstr "Senden fehlgeschlagen" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" +"Senden fehlgeschlagen. Klicken Sie auf Wiederholen, um das Senden erneut zu " +"versuchen. Wenn das Wiederholen nicht funktioniert, überprüfen Sie bitte den " +"Grund." + +msgid "reconnect" +msgstr "erneut verbinden" + +msgid "Air Pump" +msgstr "Luftpumpe" + +msgid "Laser 10W" +msgstr "Laser 10W" + +msgid "Laser 40W" +msgstr "Laser 40W" + +msgid "Cutting Module" +msgstr "Schneidemodul" + +msgid "Auto Fire Extinguishing System" +msgstr "Automatisches Feuerlöschsystem" + msgid "Model:" msgstr "Modell:" -msgid "Serial:" -msgstr "Seriennummer:" - -msgid "Version:" -msgstr "Version:" - msgid "Update firmware" msgstr "Firmware aktualisieren" msgid "Beta version" msgstr "Beta-Version" -msgid "Latest version" -msgstr "Neueste Version" - msgid "Updating" msgstr "Aktualiseren" -msgid "Updating failed" +msgid "Update failed" msgstr "Aktualisierung fehlgeschlagen" -msgid "Updating successful" +msgid "Update successful" msgstr "Erfolgreich aktualisiert" msgid "" @@ -9087,8 +11029,8 @@ msgstr "" msgid "Extension Board" msgstr "Erweiterungsboard" -msgid "Saving objects into the 3mf failed." -msgstr "Das Speichern von Objekten in der 3mf ist fehlgeschlagen." +msgid "Saving objects into the 3MF failed." +msgstr "Das Speichern von Objekten in der 3MF ist fehlgeschlagen." msgid "Only Windows 10 is supported." msgstr "Es wird nur Windows 10 unterstützt." @@ -9111,23 +11053,23 @@ msgstr "Reparatur fehlgeschlagen." msgid "Loading repaired objects" msgstr "Reparierte Objekte laden" -msgid "Exporting 3mf file failed" -msgstr "Exportieren der 3mf-Datei fehlgeschlagen" +msgid "Exporting 3MF file failed" +msgstr "Exportieren der 3MF-Datei fehlgeschlagen" -msgid "Import 3mf file failed" -msgstr "Importieren der 3mf-Datei fehlgeschlagen" +msgid "Import 3MF file failed" +msgstr "Importieren der 3MF-Datei fehlgeschlagen" -msgid "Repaired 3mf file does not contain any object" -msgstr "Reparierte 3mf-Datei enthält kein Objekt" +msgid "Repaired 3MF file does not contain any object" +msgstr "Reparierte 3MF-Datei enthält kein Objekt" -msgid "Repaired 3mf file contains more than one object" -msgstr "Reparierte 3mf-Datei enthält mehr als ein Objekt" +msgid "Repaired 3MF file contains more than one object" +msgstr "Reparierte 3MF-Datei enthält mehr als ein Objekt" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Reparierte 3mf-Datei enthält kein Volumen" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Reparierte 3MF-Datei enthält kein Volumen" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Reparierte 3mf-Datei enthält mehr als ein Volumen" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Reparierte 3MF-Datei enthält mehr als ein Volumen" msgid "Repair finished" msgstr "Reparatur abgeschlossen" @@ -9182,7 +11124,14 @@ msgstr "" "Es kann kein Objekt gedruckt werden. Vielleicht sind die Objekte zu klein." msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Ihr Druck ist sehr nahe an den Priming-Regionen. Stellen Sie sicher, dass es " +"keine Kollision gibt." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "G-Code für ungültigen benutzerdefinierten G-Code konnte nicht erzeugt " @@ -9198,6 +11147,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "G-Code wird generiert: Schicht %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "Reinigungsvolumen-Matrix stimmt nicht mit der korrekten Größe überein!" + +msgid "Grouping error: " +msgstr "Gruppierungsfehler: " + +msgid " can not be placed in the " +msgstr " kann nicht platziert werden in der " + msgid "Inner wall" msgstr "Innere Wand" @@ -9235,7 +11193,7 @@ msgid "Multiple" msgstr "Mehrere" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Berechnung der Linienbreite von %1% fehlgeschlagen. Kann den Wert von \"%2%" "\" nicht abrufen" @@ -9355,14 +11313,18 @@ msgstr "%1% ist zu nah an anderen, was Kollisionen verursachen kann." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% ist zu hoch und es kommt zu Kollisionen." -msgid " is too close to others, there may be collisions when printing." -msgstr " zu nahe an anderen; Beim Drucken kann es zu Kollisionen kommen." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " befindet sich zu nahe an einem Sperrbereich. Beim Drucken kann es zu " "Kollisionen kommen." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" +" ist zu nahe am Klumpenerkennungsbereich. Beim Drucken kann es zu " +"Kollisionen kommen." + msgid "Prime Tower" msgstr "Reinigungsturm" @@ -9373,13 +11335,49 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr " ist zu nahe am Sperrbereich und es werden Kollisionen verursacht.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" msgstr "" -"Es können nicht mehrere Filamente mit einem großen Temperaturunterschied " -"zusammen gedruckt werden. Andernfalls können der Extruder und die Düse " -"während des Drucks blockiert oder beschädigt werden." +" ist zu nahe am Klumpenerkennungsbereich und es werden Kollisionen " +"verursacht.\n" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" +"Das gleichzeitige Drucken von Hochtemperatur- und " +"Niedrigtemperaturfilamenten kann zu Düsenverstopfungen oder Druckerschäden " +"führen." + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" +"Das gleichzeitige Drucken von Hochtemperatur- und " +"Niedrigtemperaturfilamenten kann zu Düsenverstopfungen oder Druckerschäden " +"führen. Wenn Sie trotzdem drucken möchten, können Sie die Option in den " +"Einstellungen aktivieren." + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" +"Das gleichzeitige Drucken von Filamenten mit unterschiedlichen Temperaturen " +"kann zu Düsenverstopfungen oder Druckerschäden führen." + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" +"Das gleichzeitige Drucken von Hochtemperatur- und Mitteltemperaturfilamenten " +"kann zu Düsenverstopfungen oder Druckerschäden führen." + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" +"Das gleichzeitige Drucken von Mitteltemperatur- und " +"Niedrigtemperaturfilamenten kann zu Düsenverstopfungen oder Druckerschäden " msgid "No extrusions under current settings." msgstr "Keine Extrusion unter den aktuellen Einstellungen." @@ -9391,6 +11389,19 @@ msgstr "" "Der gewählte Zeitraffermodus wird nicht unterstützt, wenn die Sequenz \"nach " "Objekt\" aktiviert ist." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" +"Die Klumpenerkennung wird nicht unterstützt, wenn die Sequenz \"nach Objekt" +"\" " + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" +"Ein Reinigungsturm ist für die Klumpenerkennung erforderlich; andernfalls " +"kann es zu Fehlern am Modell kommen." + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9405,6 +11416,14 @@ msgstr "" "Der Vasen-Modus funktioniert nicht, wenn ein Objekt mehr als ein Material " "enthält." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Obwohl das Objekt %1% selbst in das Bauvolumen passt, überschreitet es die " +"maximale Bauvolumenhöhe aufgrund der Material-Schrumpfungskompensation." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Das Objekt %1% überschreitet die maximale Bauvolumenhöhe." @@ -9429,11 +11448,13 @@ msgstr "" "Variable Schichthöhe wird nicht mit organischen Stützstrukturen unterstützt." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" "Unterschiedliche Düsendurchmesser und unterschiedliche Filamentdurchmesser " -"sind nicht zulässig, wenn der Reinigungsturm aktiviert ist." +"funktionieren möglicherweise nicht gut, wenn der Reinigungsturm aktiviert " +"ist. Es ist sehr experimentell, also gehen Sie bitte vorsichtig vor." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9443,8 +11464,11 @@ msgstr "" "unterstützt (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." -msgstr "Ooze Prevention wird derzeit nicht mit dem Reinigungsturm unterstützt." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." +msgstr "" +"Ooze-Prävention wird nur mit dem Reinigungsturm unterstützt, wenn " +"'single_extruder_multi_material' ausgeschaltet ist." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9463,23 +11487,31 @@ msgstr "" "Der Reinigungsturm wird nicht unterstützt, wenn die adaptive Schichthöhe " "aktiviert ist. Er erfordert, dass alle Objekte die gleiche Schichthöhe haben." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "Der Reinigungsturm erfordert einen \"Stützabstand\", der ein Vielfaches der " "Schichthöhe sein muss." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "Der Reinigungsturm setzt voraus, dass alle Objekte die gleiche Schichthöhe " "haben." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Der Reinigungsturm erfordert, dass alle Objekte über der gleichen Anzahl von " "Floßschichten gedruckt werden." +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Der Reinigungsturm wird nur für mehrere Objekte unterstützt, wenn sie mit " +"dem gleichen support_top_z_distance gedruckt werden." + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9489,17 +11521,34 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "Der Reinigungsturm wird nur unterstützt, wenn alle Objekte die gleiche " "variable Schichthöhe haben" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Einem oder mehreren Objekten wurde ein Extruder zugewiesen, den der Drucker " +"nicht hat." + msgid "Too small line width" msgstr "Zu geringe Linienbreite" msgid "Too large line width" msgstr "Zu große Linienbreite" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Drucken mit mehreren Extrudern mit unterschiedlichen Düsendurchmessern. Wenn " +"die Stützstruktur mit dem aktuellen Filament gedruckt werden soll " +"(support_filament == 0 oder support_interface_filament == 0), müssen alle " +"Düsen den gleichen Durchmesser haben." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9533,7 +11582,7 @@ msgstr "" "Stützerzwinger werden verwendet, aber die Stützstrukturen sind nicht " "aktiviert. Bitte aktivieren Sie die Stützstruktur-Funktion." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "Schichthöhe darf den Düsendurchmesser nicht überschreiten." msgid "" @@ -9584,6 +11633,21 @@ msgstr "" "Sie können die maximale Ruckgeschwindigkeitseinstellung in der Konfiguration " "Ihres Druckers anpassen, um höhere Geschwindigkeiten zu erreichen." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"Die Einstellung der Kurvenabweichung überschreitet den maximalen Wert des " +"Druckers (machine_max_junction_deviation).\n" +"Orca wird automatisch die Kurvenabweichung begrenzen, um sicherzustellen, " +"dass sie nicht die Fähigkeiten des Druckers überschreitet.\n" +"Sie können den Wert von machine_max_junction_deviation in der Konfiguration " +"Ihres Druckers anpassen, um höhere Grenzen zu erreichen." + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9616,6 +11680,20 @@ msgstr "" "Sie können den Wert von machine_max_acceleration_travel in der Konfiguration " "Ihres Druckers anpassen, um höhere Geschwindigkeiten zu erreichen." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"Die Option für präzise Wände wird für Außen-Innen- oder Innen-Außen-Innen-" +"Wand-Sequenzen ignoriert." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Filament-Schrumpfung wird nicht verwendet, da sich die Filament-Schrumpfung " +"für die verwendeten Filamente signifikant unterscheidet." + msgid "Generating skirt & brim" msgstr "Generieren von Schürze und Rand (skirt & brim)" @@ -9628,9 +11706,15 @@ msgstr "Generiere G-Code" msgid "Failed processing of the filename_format template." msgstr "Verarbeitung der Vorlage filename_format fehlgeschlagen." +msgid "Printer technology" +msgstr "Druckertechnologie" + msgid "Printable area" msgstr "Druckbarer Bereich" +msgid "Extruder printable area" +msgstr "Druckbarer Bereich des Extruders" + msgid "Bed exclude area" msgstr "ausgenommene Druckbettfläche" @@ -9654,8 +11738,8 @@ msgid "Elephant foot compensation" msgstr "Elefantenfußkompensation" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Schrumpft die erste Schicht auf der Druckplatte, um den Elefantenfuß-Effekt " "auszugleichen." @@ -9679,7 +11763,7 @@ msgstr "Schichten" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Definiert die Höhe der einzelnen Schichten. Eine geringe Schichthöhe " "steigert die Genauigkeit und verringert die Sichtbarkeit der einzelnen " @@ -9688,14 +11772,24 @@ msgstr "" msgid "Printable height" msgstr "Druckbare Höhe" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "" "Maximale bedruckbare Höhe, die durch den Bauraum des Druckers begrenzt ist." +msgid "Extruder printable height" +msgstr "Druckbare Höhe des Extruders" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" +"Maximale bedruckbare Höhe dieses Extruders, die durch den Bauraum des " +"Druckers begrenzt ist." + msgid "Preferred orientation" msgstr "Bevorzugte Ausrichtung" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "Automatische Ausrichtung von STLs auf der Z-Achse beim Import" msgid "Printer preset names" @@ -9704,7 +11798,7 @@ msgstr "Drucker Profilname" msgid "Use 3rd-party print host" msgstr "Benutze Drittanbieter-Druck-Hosts" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "Erlauben Sie die Steuerung von BambuLab-Druckern durch Drittanbieter-Druck-" "Hosts" @@ -9730,7 +11824,7 @@ msgid "Device UI" msgstr "Gerät" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Bitte geben Sie die URL der Benutzeroberfläche Ihres Geräts an, falls sie " "nicht mit print_host identisch ist." @@ -9746,7 +11840,7 @@ msgstr "" "Feld sollte den API-Schlüssel oder das für die Authentifizierung " "erforderliche Passwort enthalten." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Name des Druckers" msgid "HTTPS CA File" @@ -9779,7 +11873,7 @@ msgstr "" "offline Verteilungspunkten. Sie können diese Option für selbst signierte " "Zertifikate aktivieren, wenn die Verbindung fehlschlägt." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Namen der Profile, die sich auf den physischen Drucker beziehen" msgid "Authorization Type" @@ -9791,22 +11885,23 @@ msgstr "API-Schlüssel" msgid "HTTP digest" msgstr "HTTP-Digest" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Vermeiden von Wandüberquerungen" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Fahren Sie einen Umweg und vermeiden Sie es, über die Wand zu fahren, was zu " "Tropfenbildung auf der Oberfläche führen kann" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Vermeide das Überqueren der Wand - Maximale Umleitungslänge" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Maximale Umleitstrecke zur Vermeidung einer Wandüberquerung: Der Drucker " "fährt keinen Umweg, wenn die Umleitstrecke größer als dieser Wert ist. Die " @@ -9815,49 +11910,54 @@ msgstr "" "diese Funktion." msgid "mm or %" -msgstr "mm or %" +msgstr "mm o. %" msgid "Other layers" msgstr "Andere Schichten" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert " +"von 0 bedeutet, dass das Filament auf der kalten Druckplatte SuperTack nicht " +"unterstützt wird." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert " "von 0 bedeutet, dass das Filament auf der kalten Druckplatte nicht " "unterstützt wird." -msgid "°C" -msgstr "°C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert " "von 0 bedeutet, dass das Filament auf der strukturierten kalten Druckplatte " "nicht unterstützt wird." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert " "von 0 bedeutet, dass das Filament auf der technischen Druckplatte nicht " "unterstützt wird." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert " "von 0 bedeutet, dass das Filament auf der Hochtemperaturdruckplatte nicht " "unterstützt wird." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Druckbetttemperatur nach der ersten Schicht. 0 bedeutet, dass das Filament " "nicht auf der texturierten PEI-Platte unterstützt wird." @@ -9869,55 +11969,65 @@ msgid "Initial layer bed temperature" msgstr "Druckbettemperatur für die erste Schicht" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " +"dass das Filament auf der kalten Druckplatte SuperTack nicht unterstützt " + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " "dass das Filament auf der kalten Druckplatte nicht unterstützt wird." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " "dass das Filament auf der strukturierten kalten Druckplatte nicht " "unterstützt wird." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " "dass das Filament auf der technischen Druckplatte nicht unterstützt wird." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " "dass das Filament auf der Hochtemperatur-Druckplatte nicht unterstützt wird." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Druckbetttemperatur der ersten Schicht. 0 bedeutet, dass das Filament nicht " "auf der texturierten PEI-Platte unterstützt wird." -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Vom Drucker unterstützte Druckbettypen" msgid "Smooth Cool Plate" msgstr "Glatte kalte Druckplatte" -msgid "Engineering Plate" -msgstr "Technische Druckplatte" - msgid "Smooth High Temp Plate" msgstr "Glatte Hochtemperatur-Druckplatte" -msgid "Textured Cool Plate" -msgstr "Strukturierte kalte Druckplatte" +msgid "Default bed type" +msgstr "Standard Druckbett-Typ" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "" +"Standard Druckbett-Typ für den Drucker (unterstützt sowohl numerisches als " +"auch " msgid "First layer print sequence" msgstr "Erste Schicht Druckreihenfolge" @@ -9931,7 +12041,7 @@ msgstr "Die Anzahl der anderen Schichten Druckreihenfolge" msgid "Other layers filament sequence" msgstr "Andere Schichten Filamentreihenfolge" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" "Dieser G-Code wird bei jedem Schichtwechsel vor dem anheben von Z eingefügt." @@ -9941,7 +12051,7 @@ msgstr "Untere Schalenschichten" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Dies ist die Anzahl der massiven Schichten der Unterschale, einschließlich " "der ersten Schicht. Wenn die mit diesem Wert berechnete Dicke dünner ist als " @@ -9954,8 +12064,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Die Anzahl der unteren festen Schichten wird beim Slicen erhöht, wenn die " "untere Schalenstärke dünner als dieser Wert ist. Dies kann verhindern, dass " @@ -9967,25 +12077,60 @@ msgid "Apply gap fill" msgstr "Lückenfüllung anwenden" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Schaltet die Lückenfüllung für die ausgewählten Oberflächen ein. Die " -"minimale Länge der Lücke, die gefüllt wird, kann über die Option \"winzige " -"Lücken herausfiltern\" unten gesteuert werden.\n" +"Schaltet die Lückenfüllung für die ausgewählten massiven Oberflächen ein. " +"Die minimale Lückenlänge, die gefüllt wird, kann von der Option zum Filtern " +"kleiner Lücken unten gesteuert werden.\n" "\n" "Optionen:\n" -"1. Überall: Füllt Lücken in oberen, unteren und inneren massiven Oberflächen " -"aus\n" -"2. Obere und untere Oberflächen: Füllt Lücken nur in oberen und unteren " -"Oberflächen aus\n" -"3. Nirgendwo: Deaktiviert die Lückenfüllung\n" +"1. Überall: Füllt Lücken in oberen, unteren und internen massiven " +"Oberflächen für maximale Festigkeit2. Obere und untere Oberflächen: Füllt " +"Lücken nur in oberen und unteren Oberflächen, um Druckgeschwindigkeit zu " +"erhöhen, potenzielle Überextrusion im massiven Infill zu reduzieren und " +"sicherzustellen, dass die oberen und unteren Oberflächen keine Löcher " +"aufweisen3. Nirgendwo: Deaktiviert die Lückenfüllung für alle massiven " +"Infill-Bereiche.\n" +"\n" +"Beachten Sie, dass bei Verwendung des klassischen Umfangsgenerators " +"Lückenfüllung auch zwischen Umfängen generiert werden kann, wenn eine volle " +"Breitenlinie nicht zwischen ihnen passt. Diese Umfangslückenfüllung wird " +"nicht durch diese Einstellung gesteuert.\n" +"\n" +"Wenn Sie möchten, dass alle Lückenfüllungen, einschließlich der vom " +"klassischen Umfangsgenerator generierten, entfernt werden, setzen Sie den " +"Wert zum Filtern kleiner Lücken auf eine große Zahl, wie 999999.\n" +"\n" +"Dies wird jedoch nicht empfohlen, da die Lückenfüllung zwischen Umfängen zur " +"Festigkeit des Modells beiträgt. Für Modelle, bei denen zwischen Umfängen " +"übermäßige Lückenfüllung generiert wird, wäre eine bessere Option, auf den " +"Arachne-Wandgenerator umzusteigen und diese Option zu verwenden, um zu " +"steuern, ob die kosmetische Lückenfüllung für obere und untere Oberflächen " +"generiert wird." msgid "Everywhere" msgstr "Überall" @@ -9996,75 +12141,158 @@ msgstr "Obere und untere Oberflächen" msgid "Nowhere" msgstr "Nirgendwo" -msgid "Force cooling for overhang and bridge" -msgstr "Zwangskühlung für Überhänge und Brücken" +msgid "Force cooling for overhangs and bridges" +msgstr "Kühlung für Überhänge und Brücken erzwingen" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Aktivieren Sie diese Option, um die Lüftergeschwindigkeit für Überhänge und " -"Brücken zu optimieren, um eine bessere Kühlung zu erreichen" +"Diese Option aktivieren, um die Einstellung der Lüftergeschwindigkeit für " +"speziell für Überhänge, interne und externe Brücken zu ermöglichen. Die " +"Einstellung der Lüftergeschwindigkeit speziell für diese Funktionen kann die " +"allgemeine Druckqualität verbessern und das Verziehen reduzieren." -msgid "Fan speed for overhang" -msgstr "Lüftergeschwindigkeit für Überhänge" +msgid "Overhangs and external bridges fan speed" +msgstr "Überhänge und externe Brücken Lüftergeschwindigkeit" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Erzwinge diese Lüftergeschwindigkeit beim Drucken von Brücken oder Wänden, " -"die einen großen Überhang aufweisen. Erzwungene Kühlung für Überhänge und " -"Brücken kann eine bessere Qualität für diese Abschnitte erzielen." +"Verwenden Sie diese Lüftergeschwindigkeit, wenn Brücken oder Überhänge mit " +"einem Überhangswert gedruckt werden, der den Wert im Parameter 'Überhänge " +"kühlen Schwellenwert' oben überschreitet. Die Kühlung speziell für Überhänge " +"und Brücken zu erhöhen, kann die allgemeine Druckqualität dieser Funktionen " +"verbessern.\n" +"\n" +"Bitte beachten Sie, dass diese Lüftergeschwindigkeit auf der unteren Seite " +"durch den oben festgelegten minimalen Lüftergeschwindigkeitsschwellenwert " +"begrenzt ist. Sie wird auch nach oben angepasst, bis zum maximalen " +"Lüftergeschwindigkeitsschwellenwert, wenn der Schwellenwert für die minimale " +"Schichtzeit nicht erreicht wird." -msgid "Cooling overhang threshold" -msgstr "Schwellenwert für die Kühlung von Überhängen" +msgid "Overhang cooling activation threshold" +msgstr "Überhänge Kühlung Aktivierungsschwelle" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Erzwingt eine bestimmte Lüftergeschwindigkeit, wenn der Winkel des Überhangs " -"des gedruckten Teils diesen Wert überschreitet. Dies wird als Prozentsatz " -"ausgedrückt, der angibt, wie groß die Breite der Linie ohne Unterstützung " -"durch die untere Schicht ist. 0%% bedeutet, dass die Kühlung für die gesamte " -"Außenwand erzwungen wird, unabhängig vom Winkel des Überhangs." +"Wenn der Überhang diesen spezifizierten Schwellenwert überschreitet, wird " +"der Kühlventilator auf die unten eingestellte 'Überhänge " +"Lüftergeschwindigkeit' eingestellt. Dieser Schwellenwert wird als " +"Prozentsatz ausgedrückt und gibt den Anteil der Breite jeder Linie an, der " +"nicht von der darunterliegenden Schicht unterstützt wird. Wenn dieser Wert " +"auf 0 % gesetzt wird, wird der Kühlventilator für alle äußeren Wände " +"eingeschaltet, unabhängig vom Winkel des Überhangs." -msgid "Bridge infill direction" -msgstr "Brückenfüllrichtung" +msgid "External bridge infill direction" +msgstr "Externe Brücken Füllrichtung" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Überbrückungswinkel überschreiben. 0 bedeutet, dass der Überbrückungswinkel " "automatisch berechnet wird. Andernfalls wird der angegebene Winkel für " "externe Brücken verwendet. Verwenden Sie 180° für keinen Winkel." -msgid "Bridge density" -msgstr "Brückendichte" +msgid "Internal bridge infill direction" +msgstr "Interne Brücken Füllrichtung" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Die Standard-Einstellung für Density of external bridges ist 100%, was " -"bedeutet, dass die Brücke als massives Material gedruckt wird. Diese " -"Einstellung kann jedoch je nach Druckanforderungen und Objekt variieren und " -"angepasst werden." +"Interner Überbrückungswinkel überschreiben. 0 bedeutet, dass der " +"Überbrückungswinkel automatisch berechnet wird. Andernfalls wird der " +"angegebene Winkel für interne Brücken verwendet. Verwenden Sie 180° für " +"keinen Winkel.\n" +"\n" +"Es wird empfohlen, ihn auf 0 zu belassen, es sei denn, es gibt ein " +"spezifisches Modell, das dies nicht erfordert." + +msgid "External bridge density" +msgstr "Externe Brücken Dichte" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Steuerung der Dichte (Abstand) der externen Brückenlinien. 100 % bedeutet " +"solide Brücke. Standard ist 100 %.\n" +"\n" +"Niedrigere Dichte externe Brücken können die Zuverlässigkeit verbessern, da " +"mehr Platz für die Luftzirkulation um die extrudierte Brücke vorhanden ist, " +"was die Kühlgeschwindigkeit verbessert." + +msgid "Internal bridge density" +msgstr "Interne Brücken Dichte" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Steuerung der Dichte (Abstand) der internen Brückenlinien. 100 % bedeutet " +"solide Brücke. Standard ist 100 %.\n" +"\n" +"Niedrigere Dichte interne Brücken können das Pillowing der oberen Oberfläche " +"reduzieren und die Zuverlässigkeit interner Brücken verbessern, da mehr " +"Platz für die Luftzirkulation um die extrudierte Brücke vorhanden ist, was " +"die Kühlgeschwindigkeit verbessert.\n" +"\n" +"Diese Option funktioniert besonders gut in Kombination mit der Option für " +"die zweite interne Brücke über Füllung, die die interne Brückenstruktur " +"weiter verbessert, bevor die feste Füllung extrudiert wird." msgid "Bridge flow ratio" msgstr "Brücken Flussrate" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Verringern Sie diesen Wert geringfügig (z. B. 0,9), um die Materialmenge für " -"die Brücke zu verringern und den Durchhang zu minimieren" +"Verringern Sie diesen Wert leicht (zum Beispiel 0,9), um die Materialmenge " +"für die Brücke zu reduzieren und das Durchhängen zu verbessern.\n" +"\n" +"Der tatsächliche Brückenfluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." msgid "Internal bridge flow ratio" msgstr "Interne Brücken Flussrate" @@ -10072,50 +12300,218 @@ msgstr "Interne Brücken Flussrate" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" "Dieser Wert bestimmt die Dicke der internen Brückenschicht. Dies ist die " -"erste Schicht über der dünnen Füllung. Verringern Sie diesen Wert leicht (z. " -"B. 0,9), um die Oberflächenqualität über der dünnen Füllung zu verbessern." +"erste Schicht über der dünnen Füllung. Verringern Sie diesen Wert leicht " +"(zum Beispiel 0,9), um die Oberflächenqualität über der dünnen Füllung zu " +"verbessern.\n" +"\n" +"Der tatsächliche interne Brückenfluss wird berechnet, indem dieser Wert mit " +"dem Brückenflussverhältnis, dem Filamentflussverhältnis und, falls " +"festgelegt, dem Objektflussverhältnis multipliziert wird." msgid "Top surface flow ratio" msgstr "Durchflussverhältnis obere Fläche" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Dieser Faktor beeinflusst die Menge des Materials für die obere Füllung. Sie " -"können ihn leicht verringern, um eine glatte Oberflächenbeschichtung zu " -"erhalten" +"Dieser Faktor beeinflusst die Menge des Materials für die obere feste " +"Füllung. Sie können ihn leicht verringern, um eine glatte Oberfläche zu " +"erhalten.\n" +"\n" +"Der tatsächliche obere Fluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." msgid "Bottom surface flow ratio" msgstr "Durchflussverhältnis untere Fläche" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Dieser Faktor beeinflusst die Menge des Materials für die untere Füllung" +"Dieser Faktor beeinflusst die Menge des Materials für die untere feste " +"Füllung.\n" +"\n" +"Der tatsächliche Fluss für die untere feste Füllung wird berechnet, indem " +"dieser Wert mit dem Filamentflussverhältnis und, falls festgelegt, dem " +"Objektflussverhältnis multipliziert wird." + +msgid "Set other flow ratios" +msgstr "Andere Flussverhältnisse festlegen" + +msgid "Change flow ratios for other extrusion path types." +msgstr "Ändern Sie die Flussverhältnisse für andere Extrusionspfadtypen." + +msgid "First layer flow ratio" +msgstr "Flussverhältnis der ersten Schicht" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" +"Dieser Faktor beeinflusst die Materialmenge in der ersten Schicht für die in " +"diesem Abschnitt aufgeführten Extrusionspfadrollen.\n" +"\n" +"Für die erste Schicht wird das tatsächliche Flussverhältnis für jede " +"Linienart (beeinflusst nicht Ränder und Umrandungen) mit diesem Wert " +"multipliziert." + +msgid "Outer wall flow ratio" +msgstr "Außenwand Durchflußrate" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für die äußeren Wände.\n" +"\n" +"Der tatsächliche Außenwandfluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." + +msgid "Inner wall flow ratio" +msgstr "Innenwand Durchflußrate" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für die inneren Wände.\n" +"\n" +"Der tatsächliche Innenwandfluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." + +msgid "Overhang flow ratio" +msgstr "Überhang Durchflußrate" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für Überhänge.\n" +"\n" +"Der tatsächliche Überhangfluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." + +msgid "Sparse infill flow ratio" +msgstr "Dünne Füllung Durchflußrate" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für die dünne Füllung.\n" +"\n" +"Der tatsächliche dünne Füllungsfluss wird berechnet, indem dieser Wert mit " +"dem Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." + +msgid "Internal solid infill flow ratio" +msgstr "Interne feste Füllung Durchflußrate" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für die interne feste " +"Füllung.\n" +"\n" +"Der tatsächliche Fluss der internen festen Füllung wird berechnet, indem " +"dieser Wert mit dem Filamentflussverhältnis und, falls festgelegt, dem " +"Objektflussverhältnis multipliziert wird." + +msgid "Gap fill flow ratio" +msgstr "Lückenfüllung Durchflußrate" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials zum Füllen der Lücken.\n" +"\n" +"Der tatsächliche Fluss zur Lückenfüllung wird berechnet, indem dieser Wert " +"mit dem Filamentflussverhältnis und, falls festgelegt, dem " +"Objektflussverhältnis multipliziert wird." + +msgid "Support flow ratio" +msgstr "Support Durchflußrate" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für den Support.\n" +"\n" +"Der tatsächliche Supportfluss wird berechnet, indem dieser Wert mit dem " +"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis " +"multipliziert wird." + +msgid "Support interface flow ratio" +msgstr "Support-Schnittstellen-Durchflußrate" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Dieser Faktor beeinflusst die Menge des Materials für die Support-" +"Schnittstelle.\n" +"Der tatsächliche Support-Schnittstellenfluss wird berechnet, indem dieser " +"Wert mit dem Filamentflussverhältnis und, falls festgelegt, dem " +"Objektflussverhältnis multipliziert wird." msgid "Precise wall" msgstr "Exakte Wand" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Verbessern Sie die Schalenpräzision, indem Sie den Abstand der äußeren Wand " -"anpassen. Dies verbessert auch die Schichtkonsistenz.\n" -"Hinweis: Diese Einstellung wird nur wirksam, wenn die Wandsequenz auf Inner-" -"Outer konfiguriert ist." +"Verbessern Sie die Schalengenauigkeit, indem Sie den Abstand der äußeren " +"Wand anpassen. Dies verbessert auch die Konsistenz der Schichten. HINWEIS: " +"Diese Option wird für Außen-Innen- oder Innen-Außen-Innen-Wand-Sequenzen " +"ignoriert." msgid "Only one wall on top surfaces" msgstr "Nur eine Wand auf den oberen Flächen" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Verwenden Sie nur eine Wand auf der Oberfläche, um mehr Platz für das obere " "Füllungsmuster zu schaffen" @@ -10149,7 +12545,7 @@ msgstr "Nur eine Wand in der ersten Schicht" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Verwenden Sie nur eine Wand in der ersten Schicht, um dem Muster der unteren " "Füllung mehr Platz zu geben" @@ -10159,37 +12555,37 @@ msgstr "Extra Umfänge bei Überhängen" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" "Erstellen Sie zusätzliche Umfangspfade über steile Überhänge und Bereiche, " "in denen Brücken nicht verankert werden können." -msgid "Reverse on odd" -msgstr "Umkehren bei ungeraden Schichten" +msgid "Reverse on even" +msgstr "Umkehren auf geraden Schichten" msgid "Overhang reversal" msgstr "Überhangsumkehr" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Extrudieren Sie Umfänge, die einen Überhang haben in die entgegen gesetzte " -"Richtung in ungeraden Schichten. Dieses abwechselnde Muster kann steile " +"Extrudieren Sie Umfänge, die über einem Überhang liegen, in umgekehrter " +"Richtung auf geraden Schichten. Dieses abwechselnde Muster kann steile " "Überhänge drastisch verbessern.\n" "\n" -"Diese Einstellung kann auch dazu beitragen, das Verziehen von Teilen zu " -"verringern, da die Spannungen in den Teilwänden reduziert werden." +"Diese Einstellung kann auch dazu beitragen, das Verziehen des Teils aufgrund " +"der Reduzierung der Spannungen in den Teilwänden zu verringern." msgid "Reverse only internal perimeters" msgstr "Nur interne Umfänge umkehren" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10198,23 +12594,23 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" "Wenden Sie die Logik der umgekehrten Umfänge nur auf interne Umfänge an.\n" "\n" -"Diese Einstellung reduziert die Spannungen in den Teilen erheblich, da sie " -"jetzt in abwechselnden Richtungen verteilt werden. Dies sollte das Verziehen " -"von Teilen reduzieren und gleichzeitig die Qualität der Außenwand " -"sicherstellen. Diese Funktion kann für Materialien, die zum Verziehen neigen " -"wie ABS/ASA, und auch für elastische Filamente wie TPU und Silk PLA sehr " -"nützlich sein. Sie kann auch dazu beitragen, das Verziehen in schwebenden " -"Bereichen über Stützstrukturen zu reduzieren.\n" +"Diese Einstellung reduziert die Spannungen im Teil erheblich, da sie jetzt " +"in abwechselnde Richtungen verteilt sind. Dies sollte das Verziehen des " +"Teils reduzieren und gleichzeitig die Qualität der äußeren Wand erhalten. " +"Diese Funktion kann sehr nützlich für Materialien sein, die zum Verziehen " +"neigen, wie ABS/ASA, und auch für elastische Filamente, wie TPU und Seiden-" +"PLA. Sie kann auch dazu beitragen, das Verziehen in schwebenden Bereichen " +"über Stützen zu reduzieren.\n" "\n" "Damit diese Einstellung am effektivsten ist, wird empfohlen, den " -"Umkehrschwellenwert auf 0 zu setzen, damit alle internen Wände in ungeraden " -"Schichten unabhängig von ihrem Überhangsgrad in abwechselnden Richtungen " +"Umkehrschwellenwert auf 0 zu setzen, damit alle internen Wände auf geraden " +"Schichten unabhängig von ihrem Überhangswinkel in abwechselnden Richtungen " "gedruckt werden." msgid "Bridge counterbore holes" @@ -10223,9 +12619,9 @@ msgstr "Brücken für Senkungen" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Diese Option erstellt Brücken für Senkungen, die es ermöglichen, sie ohne " "Unterstützung zu drucken. Die verfügbaren Modi sind:\n" @@ -10250,22 +12646,23 @@ msgstr "Schwellenwert für die Überhangsumkehr" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Anzahl der mm, die der Überhang haben muss, damit die Umkehr als nützlich " -"angesehen wird. Kann ein % der Umfangsbreite sein.\n" -"Wert 0 aktiviert die Umkehr in jeder ungeraden Schicht." - -msgid "Classic mode" -msgstr "Klassicher Modus" - -msgid "Enable this option to use classic mode" -msgstr "Diese Option aktivieren, um den klassischen Modus zu verwenden" +"Die Anzahl der Millimeter, die der Überhang betragen muss, damit die " +"Umkehrung als nützlich angesehen wird. Kann ein Prozentsatz der " +"Umfangsbreite sein.\n" +"Der Wert 0 aktiviert die Umkehrung auf jeder geraden Schicht unabhängig " +"davon.\n" +"Wenn die Erkennung der Überhangswand nicht aktiviert ist, wird diese Option " +"ignoriert und die Umkehrung erfolgt auf jeder geraden Schicht unabhängig " +"davon." msgid "Slow down for overhang" msgstr "Verlangsamen bei Überhängen" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Aktivieren Sie diese Option, um den Druck für verschiedene Überhangsgrade zu " "verlangsamen" @@ -10273,40 +12670,79 @@ msgstr "" msgid "Slow down for curled perimeters" msgstr "Langsamer Druck für gekrümmte Umfänge" +#, fuzzy, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" "Aktivieren Sie diese Option, um den Druck in Bereichen zu verlangsamen, in " -"denen möglicherweise gekrümmte Umfänge vorhanden sind" +"denen die Umfänge nach oben gekrümmt sein können. Zum Beispiel wird eine " +"zusätzliche Verlangsamung angewendet, wenn Überhänge an scharfen Ecken wie " +"der Vorderseite des Benchy-Rumpfes gedruckt werden, um das Kräuseln zu " +"reduzieren, das sich über mehrere Schichten hinweg aufbaut.\n" +"\n" +"Es wird im Allgemeinen empfohlen, diese Option eingeschaltet zu lassen, es " +"sei denn, Ihr Drucker ist leistungsstark genug oder die Druckgeschwindigkeit " +"ist langsam genug, dass das Kräuseln der Umfänge nicht auftritt. Wenn mit " +"einer hohen externen Umfangsgeschwindigkeit gedruckt wird, kann dieser " +"Parameter leichte Artefakte verursachen, wenn er aufgrund der großen Varianz " +"der Druckgeschwindigkeiten verlangsamt wird. Wenn Sie Artefakte bemerken, " +"stellen Sie sicher, dass Ihr Druckvorschub korrekt eingestellt ist.\n" +"\n" +"Hinweis: Wenn diese Option aktiviert ist, werden Umfangsumfänge wie " +"Überhänge behandelt, was bedeutet, dass die Überhangsgeschwindigkeit " +"angewendet wird, auch wenn der überhängende Umfang Teil einer Brücke ist. " +"Zum Beispiel, wenn die Umfänge zu 100 % überhängen, ohne dass eine Wand sie " +"von unten stützt, wird die Überhangsgeschwindigkeit von 100 % angewendet." msgid "mm/s or %" msgstr "mm/s o. %" -msgid "External" -msgstr "Extern" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Geschwindigkeit für Brücken und vollständig überhängende Wände." - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Geschwindigkeit der extern sichtbaren Brückenextrusionen.\n" +"\n" +"Darüber hinaus wird, wenn die Option zum Verlangsamen von gekrümmten " +"Umfängen deaktiviert ist oder der klassische Überhangsmodus aktiviert ist, " +"die Druckgeschwindigkeit der Überhangswände, die zu weniger als 13 % " +"gestützt sind, ob sie Teil einer Brücke oder eines Überhangs sind." msgid "Internal" msgstr "Intern" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Geschwindigkeit der internen Brücke. Wenn der Wert als Prozentsatz angegeben " -"ist, wird er basierend auf der Brückengeschwindigkeit berechnet. " -"Standardwert ist 150%." +"Geschwindigkeit der internen Brücken. Wenn der Wert als Prozentsatz " +"angegeben wird, wird er auf der Grundlage der Brückengeschwindigkeit " +"berechnet. Der Standardwert beträgt 150 %." msgid "Brim width" msgstr "Randbreite" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Abstand vom Modell zur äußersten Randlinie" msgid "Brim type" @@ -10314,7 +12750,7 @@ msgstr "Randtyp" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Dies steuert die Erstellung des Brims an der äußeren und/oder inneren " "Seitevon Modellen. Auto bedeutet, dass die Breite des Brims automatisch " @@ -10325,7 +12761,7 @@ msgstr "Lücke zwischen Rand und Objekt" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Eine Lücke zwischen der innersten Randlinie und dem Objekt kann das Abnehmen " "des Randes erleichtern" @@ -10340,8 +12776,8 @@ msgid "Brim ear max angle" msgstr "Maximaler Winkel für Brim-Ohren" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Höchster Winkel, bei dem ein Brim-Ohr erscheinen soll.\n" @@ -10353,31 +12789,46 @@ msgid "Brim ear detection radius" msgstr "Radius für die Erkennung von Brim-Ohren" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -"Die Geometrie wird vor der Erkennung von scharfen Winkeln reduziert. " -"DieserParameter gibt die minimale Länge der Abweichung für die Reduzierung " -"an.\n" -"0, um die Reduzierung zu deaktivieren." +"Die Geometrie wird vor der Erkennung scharfer Winkel reduziert. Dieser " +"Parameter ist ein Indikator für die minimale Länge der Abweichung für die " +"Reduzierung.\n" +"0 zum Deaktivieren." -msgid "Compatible machine" -msgstr "Kompatible Maschine" +msgid "Select printers" +msgstr "Drucker auswählen" msgid "upward compatible machine" msgstr "Aufwärtskompatible Maschine" -msgid "Compatible machine condition" -msgstr "Kompatibler Maschinenzustand" +msgid "Condition" +msgstr "Bedingung" -msgid "Compatible process profiles" -msgstr "Kompatible Prozessprofile" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Eine boolesche Ausdruck, der die Konfigurationswerte eines aktiven " +"Druckerprofils verwendet. Wenn dieser Ausdruck wahr ist, wird dieses Profil " +"als kompatibel mit dem aktiven Druckerprofil betrachtet." -msgid "Compatible process profiles condition" -msgstr "Bedingung für kompatible Prozessprofile" +msgid "Select profiles" +msgstr "Profil auswählen" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Eine boolesche Ausdruck, der die Konfigurationswerte eines aktiven " +"Druckerprofils verwendet. Wenn dieser Ausdruck wahr ist, wird dieses Profil " +"als kompatibel mit dem aktiven Druckerprofil betrachtet." + +msgid "Print sequence, layer by layer or object by object." msgstr "Druckreihenfolge, Schicht für Schicht oder Objekt für Objekt" msgid "By layer" @@ -10389,7 +12840,7 @@ msgstr "Nach Objekt" msgid "Intra-layer order" msgstr "Intra-Schicht-Reihenfolge" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "Druckreihenfolge innerhalb einer einzelnen Schicht" msgid "As object list" @@ -10402,7 +12853,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Aktivieren Sie diese Option, um die Druckgeschwindigkeit zu verlangsamen, so " "dass die endgültige Schichtzeit nicht kürzer als die Mindestschichtzeit in " @@ -10415,24 +12866,21 @@ msgstr "Normales Drucken" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Die Standardbeschleunigung für den normalen Druck und den Eilgang nach der " "ersten Schicht." -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Standard-Filamentprofil" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Standard-Filamentprofil beim Wechsel zu diesem Maschinenprofil" msgid "Default process profile" msgstr "Standard-Prozessprofil" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Standard-Prozessprofil beim Wechsel zu diesem Maschinenprofil" msgid "Activate air filtration" @@ -10446,21 +12894,21 @@ msgid "Fan speed" msgstr "Lüftergeschwindigkeit" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Geschwindigkeit des Abluftventilators während des Drucks. Diese Geschwindig-" -"keit überschreibt die Geschwindigkeit im Filament-Benutzerdefinierten G-Code" +"keit überschreibt die Geschwindigkeit im Filament-Benutzerdefinierten G-Code." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Geschwindigkeit des Abluftventilators nach Abschluss des Drucks" msgid "No cooling for the first" msgstr "Keine Kühlung für die erste" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Schalte alle Lüfter für die ersten Schichten aus. Dies kann genutzt werden, " "um die Betthaftung zu verbessern." @@ -10469,15 +12917,15 @@ msgid "Don't support bridges" msgstr "Brücken nicht unterstützen" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Stützt den Brückenbereich nicht ab, was die die Menge der benötigten Stützen " "reduziert. Brücken können in der Regel direkt ohne Stützen gedruckt werden, " "wenn diese nicht sehr lang sind." -msgid "Thick bridges" -msgstr "Dicke Brücken" +msgid "Thick external bridges" +msgstr "Dicke externe Brücken" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10501,68 +12949,139 @@ msgstr "" "wird normalerweise empfohlen, diese Funktion zu aktivieren. Wenn Sie jedoch " "große Düsen verwenden, sollten Sie diese Funktion deaktivieren." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Kleine interne Brücken nicht herausfiltern (experimentell)" +msgid "Extra bridge layers (beta)" +msgstr "Zusätzliche Brückenschichten (Beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Diese Option kann dazu beitragen, das Polstern auf Oberflächen mit stark " -"geneigten oder gekrümmten Modellen zu reduzieren.\n" +"Diese Option aktiviert die Erzeugung einer zusätzlichen Brückenschicht über " +"internen und/oder externen Brücken.\n" "\n" -"Standardmäßig werden kleine interne Brücken herausgefiltert und das interne " -"massive Infill wird direkt über dem dünnen Infill gedruckt. Dies " -"funktioniert in den meisten Fällen gut und beschleunigt den Druck ohne zu " -"große Kompromisse bei der Qualität der Oberfläche.\n" +"Zusätzliche Brückenschichten verbessern das Aussehen und die Zuverlässigkeit " +"von Brücken, da das feste Infill besser unterstützt wird. Dies ist besonders " +"nützlich bei schnellen Druckern, bei denen die Brücken- und " +"Feststofffüllungs-geschwindigkeiten stark variieren. Die zusätzliche " +"Brückenschicht führt zu einer Verringerung des Pillowing auf den oberen " +"Oberflächen sowie zu einer Verringerung der Ablösung der externen " +"Brückenschicht von ihren umgebenden Umfängen.\n" "\n" -"In stark geneigten oder gekrümmten Modellen, insbesondere bei zu geringer " -"Dichte des dünnen Infill, kann dies jedoch zu einer Krümmung des " -"ununterstützten massiven Infill führen, was zu Polstern führt.\n" +"Es wird im Allgemeinen empfohlen, dies zumindest auf 'Nur externe Brücke' zu " +"setzen, es sei denn, es werden spezifische Probleme mit dem geschnittenen " +"Modell gefunden.\n" "\n" -"Wenn Sie diese Option aktivieren, wird die interne Brückenschicht über dem " -"leicht ununterstützten internen massiven Infill gedruckt. Die folgenden " -"Optionen steuern die Menge der Filterung, d.h. die Menge der erstellten " -"internen Brücken.\n" -"\n" -"Deaktiviert - Deaktiviert diese Option. Dies ist das Standardverhalten und " -"funktioniert in den meisten Fällen gut.\n" -"\n" -"Begrenzte Filterung - Erstellt interne Brücken auf stark geneigten Flächen, " -"vermeidet jedoch die Erstellung von unnötigen internen Brücken. Dies " -"funktioniert gut für die meisten schwierigen Modelle.\n" -"\n" -"Keine Filterung - Erstellt interne Brücken auf jedem potenziellen internen " -"Überhang. Diese Option ist für stark geneigte Oberflächenmodelle nützlich. " -"In den meisten Fällen werden jedoch zu viele unnötige Brücken erstellt." +"Optionen:\n" +"1. Deaktiviert - erzeugt keine zweiten Brückenschichten. Dies ist der " +"Standard und wird aus Kompatibilitätsgründen festgelegt.\n" +"2. Nur externe Brücke - erzeugt zweite Brückenschichten nur für nach außen " +"gerichtete Brücken. Bitte beachten Sie, dass kleine Brücken, die kürzer oder " +"schmaler sind als die festgelegte Anzahl von Umfängen, übersprungen werden, " +"da sie von einer zweiten Brückenschicht nicht profitieren würden. Wenn " +"erzeugt, wird die zweite Brückenschicht parallel zur ersten Brückenschicht " +"extrudiert, um die Brückenfestigkeit zu verstärken.\n" +"3. Nur interne Brücke - erzeugt zweite Brückenschichten nur für interne " +"Brücken über dünner Füllung. Bitte beachten Sie, dass die internen Brücken " +"zur Anzahl der oberen Schalenlagen Ihres Modells zählen. Die zweite interne " +"Brückenschicht wird so nahe wie möglich senkrecht zur ersten extrudiert. " +"Wenn mehrere Regionen in derselben Insel mit unterschiedlichen " +"Brückenwinkeln vorhanden sind, wird die letzte Region dieser Insel als " +"Winkelreferenz ausgewählt.\n" +"4. Auf alle anwenden - erzeugt zweite Brückenschichten für interne und nach " +"außen gerichtete Brücken\n" msgid "Disabled" msgstr "Deaktiviert" +msgid "External bridge only" +msgstr "Nur externe Brücke" + +msgid "Internal bridge only" +msgstr "Nur interne Brücke" + +msgid "Apply to all" +msgstr "Auf alle anwenden" + +msgid "Filter out small internal bridges" +msgstr "Kleine interne Brücken filtern" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Diese Option kann dazu beitragen, das Pillowing auf den oberen Oberflächen " +"in stark geneigten oder gekrümmten Modellen zu reduzieren.\n" +"Standardmäßig werden kleine interne Brücken herausgefiltert und das interne " +"feste Infill wird direkt über dem dünnen Infill gedruckt. Dies funktioniert " +"in den meisten Fällen gut und beschleunigt den Druck, ohne die Qualität der " +"oberen Oberfläche zu sehr zu beeinträchtigen.\n" +"In stark geneigten oder gekrümmten Modellen, insbesondere wenn eine zu " +"geringe Dichte des dünnen Infill verwendet wird, kann dies jedoch dazu " +"führen, dass das nicht unterstützte feste Infill kräuselt und Pillowing " +"verursacht.\n" +"Das Aktivieren der begrenzten Filterung oder der Filterung deaktiviert die " +"Filterung und druckt die interne Brückenschicht über dem leicht nicht " +"unterstützten internen festen Infill. Die folgenden Optionen steuern die " +"Empfindlichkeit der Filterung, d. h. sie steuern, wo interne Brücken " +"erstellt werden.\n" +"1. Filter - aktiviert diese Option. Dies ist das Standardverhalten und " +"funktioniert in den meisten Fällen gut.\n" +"2. Begrenzte Filterung - erstellt interne Brücken auf stark geneigten " +"Oberflächen und vermeidet unnötige Brücken. Dies funktioniert für die " +"meisten schwierigen Modelle gut.\n" +"3. Keine Filterung - erstellt interne Brücken an jedem potenziellen internen " +"Überhang. Diese Option ist für stark geneigte obere Oberflächenmodelle " +"nützlich; in den meisten Fällen erstellt sie jedoch zu viele unnötige " +"Brücken." + msgid "Limited filtering" msgstr "Begrenzte Filterung" @@ -10584,20 +13103,20 @@ msgstr "" msgid "End G-code" msgstr "End G-Code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "End G-Code nach dem fertigstellen des Drucks hinzufügen." -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Zwischen Objekt G-Code" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Füge G-Code zwischen den Objekten ein. Dieser Parameter wird nur wirksam, " "wenn Sie Ihre Modelle Objekt für Objekt drucken." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "End-G-Code hinzufügen, wenn der Druck dieses Filaments beenden ist." msgid "Ensure vertical shell thickness" @@ -10632,24 +13151,24 @@ msgstr "Moderat" msgid "Top surface pattern" msgstr "Muster der Oberfläche" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Füllmuster der obersten Fläche" -msgid "Concentric" -msgstr "Konzentrisch" - -msgid "Rectilinear" -msgstr "Geradlinig" - msgid "Monotonic" msgstr "Monotonisch" msgid "Monotonic line" msgstr "Monotonische Linie" +msgid "Rectilinear" +msgstr "Geradlinig" + msgid "Aligned Rectilinear" msgstr "Geradlinig ausgerichtet" +msgid "Concentric" +msgstr "Konzentrisch" + msgid "Hilbert Curve" msgstr "Hilbert-Kurve" @@ -10662,7 +13181,7 @@ msgstr "Oktagramm Spirale" msgid "Bottom surface pattern" msgstr "Muster der unteren Fläche" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "Linienmuster der Bodenfüllung. Brückenfüllung nicht eingeschlossen" msgid "Internal solid infill pattern" @@ -10710,7 +13229,7 @@ msgid "Small perimeters threshold" msgstr "Schwelle für kleine Strukturen" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Dies legt die Schwelle für eine kleine Umfangslänge fest. Der Standardwert " "für die Schwelle beträgt 0 mm." @@ -10719,10 +13238,10 @@ msgid "Walls printing order" msgstr "Anordnung der Wände" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10732,15 +13251,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" "Druckreihenfolge der inneren und äußeren Wände.\n" "\n" @@ -10762,9 +13279,7 @@ msgstr "" "Verwenden Sie Außen/Innen für die gleiche externe Wandqualität und " "dimensionale Genauigkeit wie die Option Innen/Außen/Innen. Die Z-Nähte " "werden jedoch weniger konsistent erscheinen, da die erste Extrusion einer " -"neuen Schicht auf einer sichtbaren Oberfläche beginnt.\n" -"\n" -" " +"neuen Schicht auf einer sichtbaren Oberfläche beginnt." msgid "Inner/Outer" msgstr "Innen/Außen" @@ -10783,7 +13298,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10806,16 +13321,16 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" "Die Richtung, in der die Wand-Schleifen extrudiert werdenStandardmäßig " "werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei denn, die " -"Umkehrung bei ungeraden Schichten ist aktiviert. Wenn Sie dies auf eine " -"Option außer Auto setzen, wird die Wandrichtung unabhängig von der Umkehrung " -"bei ungeraden Schichten erzwungen.\n" +"Option Umkehrung bei geraden Schichten ist aktiviert. Wenn diese Option auf " +"einen anderen Wert als Auto gesetzt wird, wird die Wandrichtung unabhängig " +"von der Umkehrung bei geraden Schichten festgelegt.\n" "Diese Option wird deaktiviert, wenn der Spiral-Vase-Modus aktiviert ist." msgid "Counter clockwise" @@ -10926,10 +13441,13 @@ msgstr "" "Diese Option bestimmt den zusätzlichen Abstand, um den der adaptive Bett-" "Mesh-Bereich in den XY-Richtungen erweitert werden soll." +msgid "Grab length" +msgstr "Greiferlänge" + msgid "Extruder Color" msgstr "Extruder Farbe" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Nur als visuelle Hilfe auf der UI verwendet" msgid "Extruder offset" @@ -10939,11 +13457,11 @@ msgid "Flow ratio" msgstr "Flussverhältnis" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Das Material kann sich nach dem Wechsel zwischen geschmolzenem und " "kristallinem Zustand volumetrisch verändern. Mit dieser Einstellung werden " @@ -10952,19 +13470,179 @@ msgstr "" "anpassen, um eine schöne flache Oberfläche zu erhalten, wenn es eine leichte " "Über- oder Unterextrusion gibt." +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Das Material kann sich nach dem Wechsel zwischen geschmolzenem und " +"kristallinem Zustand volumetrisch verändern. Mit dieser Einstellung werden " +"alle Extrusionsströme dieses Filaments im G-Code proportional geändert. Der " +"empfohlene Wertebereich liegt zwischen 0,95 und 1,05. Sie können diesen Wert " +"anpassen, um eine schöne flache Oberfläche zu erhalten, wenn es eine leichte " +"Über- oder Unterextrusion gibt.\n" +"\n" +"Das endgültige Objekt-Flussverhältnis ist das Produkt aus diesem Wert und " +"dem Filament-Flussverhältnis." + msgid "Enable pressure advance" msgstr "Pressure advance aktivieren" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" "Wenn Pressure Advance aktiviert ist,werden Auto-Kalibrierungsergebnisse " "überschrieben." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Pressure advance(Klipper)AKA Linear advance Faktor(Marlin)" +msgid "Enable adaptive pressure advance (beta)" +msgstr "Adaptive Pressure Advance aktivieren (Beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Mit zunehmender Druckgeschwindigkeit (und damit zunehmendem Volumenstrom " +"durch die Düse) und zunehmenden Beschleunigungen wurde beobachtet, dass der " +"effektive PA-Wert in der Regel abnimmt. Dies bedeutet, dass ein einzelner PA-" +"Wert nicht immer zu 100% optimal für alle Funktionen ist und in der Regel " +"ein Kompromisswert verwendet wird, der keine zu starke Ausbeulung bei " +"Funktionen mit niedrigerer Fließgeschwindigkeit und Beschleunigungen " +"verursacht, während er auch keine Lücken bei schnelleren Funktionen " +"verursacht.\n" +"\n" +"Dieses Feature zielt darauf ab, diese Einschränkung zu beheben, indem die " +"Reaktion des Extrusionssystems Ihres Druckers in Abhängigkeit von der " +"Volumenfließgeschwindigkeit und Beschleunigung, mit der gedruckt wird, " +"modelliert wird. Intern wird ein angepasstes Modell generiert, das den " +"benötigten Druckvorschub für eine beliebige gegebene Volumenfließgeschwindig-" +"keit und Beschleunigung extrapolieren kann, der dann je nach den aktuellen " +"Druckbedingungen an den Drucker ausgegeben wird.\n" +"\n" +"Wenn diese Option aktiviert ist, wird der obige Druckvorschubwert überschrie-" +"ben. Es wird jedoch dringend empfohlen, einen vernünftigen Standardwert oben " +"zu verwenden, um als Fallback und für den Werkzeugwechsel zu dienen.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Adaptive Pressure Advance Messung (experimentell)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Fügen Sie Sätze von Druckvorschub (PA)-Werten, den Volumenfließgeschwindig-" +"keiten und Beschleunigungen, bei denen sie gemessen wurden, durch ein Komma " +"getrennt hinzu. Ein Satz von Werten pro Zeile. Zum Beispiel\n" +"0,04,3,96,3000\n" +"0,033,3,96,10000\n" +"0,029,7,91,3000\n" +"0,026,7,91,10000\n" +"\n" +"Wie einstellen?\n" +"1. PA Test für mindestens 3 Geschwindigkeiten pro Beschleunigung " +"durchführen. Es wird empfohlen, dass der Test mindestens für die Geschwindig-" +"keit der äußeren Umfänge, die Geschwindigkeit der inneren Umfänge und die " +"schnellste Funktionendruckgeschwindigkeit in Ihrem Profil (normalerweise ist " +"es das dünne oder massive Infill) durchgeführt wird. Führen Sie sie dann für " +"die gleichen Geschwindigkeiten für die langsamsten und schnellsten " +"Druckbeschleunigungen durch und nicht schneller als die empfohlene maximale " +"Beschleunigung, wie sie vom Klipper-Eingabe-Shaper angegeben wird.\n" +"2. Notieren Sie den optimalen PA-Wert für jede Volumenfließgeschwindigkeit " +"und Beschleunigung. Sie können die Fließzahl auswählen, indem Sie Fluss " +"ausdem Farbschema-Dropdown auswählen und den horizontalen Schieberegler über " +"den PA-Musterlinien bewegen. Die Zahl sollte am unteren Rand der Seite " +"sichtbar sein. Der ideale PA-Wert sollte abnehmen, je höher die " +"Volumenfließgeschwin-digkeit ist. Wenn dies nicht der Fall ist, bestätigen " +"Sie, dass Ihr Extruder korrekt funktioniert. Je langsamer und mit weniger " +"Beschleunigung Sie drucken, desto größer ist der Bereich der akzeptablen PA-" +"Werte. Wenn kein Unterschied sichtbar ist, verwenden Sie den PA-Wert aus dem " +"schnelleren Test.\n" +"3. Geben Sie die Triplets von PA-Werten, Fluss und Beschleunigungen im " +"Textfeld hier ein und speichern Sie Ihr Filamentprofil." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Adaptives PA für Überhänge aktivieren (experimentell)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Adaptives PA für Überhänge aktivieren, sowie wenn der Fluss innerhalb der " +"gleichen Funktion geändert wird. Dies ist eine experimentelle Option, da bei " +"einer ungenauen Einstellung des PA-Profils Gleichmäßigkeitsprobleme auf den " +"externen Oberflächen vor und nach Überhängen verursacht werden.\n" + +msgid "Pressure advance for bridges" +msgstr "Pressure Advance für Brücken" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Pressure Advance-Wert für Brücken. Auf 0 setzen, um zu deaktivieren.\n" +"\n" +"Ein niedrigerer PA-Wert beim Drucken von Brücken hilft, das Auftreten einer " +"leichten Unterextrusion unmittelbar nach Brücken zu reduzieren. Dies wird " +"durch den Druckabfall in der Düse beim Drucken in der Luft verursacht, und " +"ein niedrigerer PA hilft, dem entgegenzuwirken." + msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." @@ -10977,8 +13655,9 @@ msgid "Keep fan always on" msgstr "Lüfter ständig laufen lassen" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Wenn diese Einstellung aktiviert ist, wird der Teillüfter nie abgeschaltet " "und läuft zumindest mit minimaler Geschwindigkeit, um die Häufigkeit des " @@ -10991,25 +13670,21 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "Wenn diese Einstellung aktiviert ist, wird sichergestellt, dass die externen " "Umfänge nicht verlangsamt werden, um die Mindestschichtzeit zu erreichen. " "Dies ist besonders hilfreich in den folgenden Szenarien:\n" -"\n" -" 1. Um Änderungen im Glanz beim Drucken von glänzenden Filamenten zu " +"1. Um Änderungen im Glanz beim Drucken von glänzenden Filamenten zu " "vermeiden\n" "2. Um Änderungen in der Geschwindigkeit der äußeren Wand zu vermeiden, die " "leichte Wandartefakte erzeugen können, die wie Z-Banding aussehen\n" "3. Um das Drucken mit Geschwindigkeiten zu vermeiden, die VFAs (feine " -"Artefakte) an den äußeren Wänden verursachen\n" -"\n" +"Artefakte) an den äußeren Wänden verursachen" msgid "Layer time" msgstr "Schichtdauer" @@ -11017,7 +13692,7 @@ msgstr "Schichtdauer" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Der Bauteillüfter wird für Schichten aktiviert, deren geschätzte Zeit kürzer " "als dieser Wert ist. Die Lüftergeschwindigkeit wird zwischen der minimalen " @@ -11027,8 +13702,12 @@ msgstr "" msgid "Default color" msgstr "Standardfarbe" -msgid "Default filament color" -msgstr "Standard-Filamentfarbe" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Standard-Filamentfarbe\n" +"Rechtsklick, um den Wert auf den Systemstandard zurückzusetzen." msgid "Filament notes" msgstr "Filamentnotizen" @@ -11046,47 +13725,119 @@ msgstr "" "Mindest-HRC der Düse, die zum Drucken des Filaments erforderlich ist. Ein " "Wert von 0 bedeutet, dass die HRC der Düse nicht geprüft wird." +msgid "Filament map to extruder" +msgstr "Filament-Zuordnung zum Extruder" + +msgid "Filament map to extruder." +msgstr "Filament-Zuordnung zum Extruder." + +msgid "filament mapping mode" +msgstr "Filament-Zuordnungsmodus" + +msgid "Auto For Flush" +msgstr "Automatisch für Spülen" + +msgid "Auto For Match" +msgstr "Automatisch für Übereinstimmung" + +msgid "Flush temperature" +msgstr "Spültemperatur" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" +"Temperatur beim Spülen des Filaments. 0 bedeutet die obere Grenze des " +"empfohlenen Düsentemperaturbereichs." + +msgid "Flush volumetric speed" +msgstr "Volumetrische Spülgeschwindigkeit" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" +"Volumetrische Geschwindigkeit beim Spülen des Filaments. 0 bedeutet die " +"maximale volumetrische Geschwindigkeit." + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Diese Einstellung ist das Volumen des Filaments, das pro Sekunde geschmolzen " "und extrudiert werden kann. Die Druckgeschwindigkeit wird durch die maximale " "volumetrische Geschwindigkeit begrenzt, falls die Geschwindigkeit zu hoch " "und unangemessen eingestellt ist. Dieser Wert kann nicht Null sein." -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Ladedauer des Filaments" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Zeit zum Laden des neuen Filaments, beim Wechseln des Filaments. Nur für " -"statistische Zwecke." +"Zeit zum Laden des neuen Filaments beim Wechsel des Filaments. Es ist in der " +"Regel für Einzel-Extruder-Multi-Material-Maschinen anwendbar. Für " +"Werkzeugwechsler oder Multi-Tool-Maschinen beträgt es in der Regel 0. Nur " +"für Statistiken" msgid "Filament unload time" msgstr "Entladezeit des Filaments" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Zeit zum Entladen des alten Filaments, beim Wechseln des Filaments. Nur für " -"statistische Zwecke." +"Zeit zum Entladen des alten Filaments beim Wechsel des Filaments. Es ist in " +"der Regel für Einzel-Extruder-Multi-Material-Maschinen anwendbar. Für " +"Werkzeugwechsler oder Multi-Tool-Maschinen beträgt es in der Regel 0. Nur " +"für Statistiken" + +msgid "Tool change time" +msgstr "Werkzeugwechselzeit" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Zeit, die zum Wechseln der Werkzeuge benötigt wird. Es ist in der Regel für " +"Werkzeugwechsler oder Multi-Tool-Maschinen anwendbar. Für Einzel-Extruder-" +"Multi-Material-Maschinen beträgt es in der Regel 0. Nur für Statistiken" + +msgid "Bed temperature type" +msgstr "Betttemperaturtyp" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" +"Diese Option bestimmt, wie die Betttemperatur während des Slicens " +"eingestellt wird: basierend auf der Temperatur des ersten Filaments oder der " +"höchsten Temperatur der gedruckten Filamente." + +msgid "By First filament" +msgstr "Nach dem ersten Filament" + +msgid "By Highest Temp" +msgstr "Nach der höchsten Temperatur" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Der Filamentdurchmesser wird für die Berechnung der Extrusion im G-Code " -"verwendet, er ist also wichtig und sollte genau sein" +"verwendet, er ist also wichtig und sollte genau sein." msgid "Pellet flow coefficient" msgstr "Pellet-Flusskoeffizient" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -11102,13 +13853,29 @@ msgstr "" "\n" "Filamentdurchmesser = sqrt( (4 * Pellet-Flusskoeffizient) / PI )" -msgid "Shrinkage" -msgstr "Schrumpfung" +msgid "Adaptive volumetric speed" +msgstr "Adaptive volumetrische Geschwindigkeit" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" +"Wenn aktiviert, wird der Extrusionsfluss durch den kleineren der angepassten " +"Wert (berechnet aus Linienbreite und Schichthöhe) und den vom Benutzer " +"definierten maximalen Fluss begrenzt. Wenn deaktiviert, wird nur der vom " +"Benutzer definierte maximale Fluss angewendet." + +msgid "Max volumetric speed multinomial coefficients" +msgstr "Maximale volumetrische Geschwindigkeits-Multinomial-Koeffizienten" + +msgid "Shrinkage (XY)" +msgstr "Schrumpfung (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -11120,6 +13887,25 @@ msgstr "" "Objekten vorhanden ist, da diese Kompensation nach den Überprüfungen " "durchgeführt wird." +msgid "Shrinkage (Z)" +msgstr "Schrumpfung (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Gib das Schrumpfungsprozent ein, die das Filament nach dem Abkühlen haben " +"wird(94%, wenn du 94mm anstatt 100mm misst). Das Teil wird in der Z-Ebene " +"skaliert, um das zukompensieren." + +msgid "Adhesiveness Category" +msgstr "Haftungskategorie" + +msgid "Filament category." +msgstr "Filamentkategorie." + msgid "Loading speed" msgstr "Lade-Geschwindigkeit" @@ -11136,7 +13922,7 @@ msgid "Unloading speed" msgstr "Entlade-Geschwindigkeit" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Geschwindigkeit, die zum Entladen des Filaments im Wischturm verwendet wird " @@ -11155,8 +13941,8 @@ msgid "Delay after unloading" msgstr "Verzögerung nach dem Entladen" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Wartezeit nach dem Entladen des Filaments. Kann helfen, zuverlässige " @@ -11173,6 +13959,25 @@ msgstr "" "Das Filament wird gekühlt, indem es in den Kühlrohren hin und her bewegt " "wird. Geben Sie die gewünschte Anzahl dieser Bewegungen an." +msgid "Stamping loading speed" +msgstr "Lade-Geschwindigkeit für das Stamping" + +msgid "Speed used for stamping." +msgstr "Geschwindigkeit, die für das Stamping verwendet wird." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Stamping-Abstand, gemessen vom Zentrum des Kühlrohrs" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Wenn ein Wert ungleich Null eingestellt ist, wird das Filament zwischen den " +"einzelnen Kühlbewegungen (\"Stamping\") in Richtung der Düse bewegt. Diese " +"Option konfiguriert, wie lange diese Bewegung sein soll, bevor das Filament " +"wieder zurückgezogen wird." + msgid "Speed of the first cooling move" msgstr "Geschwindigkeit der ersten Kühlbewegung" @@ -11203,16 +14008,6 @@ msgstr "Geschwindigkeit der letzten Kühlbewegung" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Kühlbewegungen beschleunigen allmählich auf diese Geschwindigkeit." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Zeit für die Drucker-Firmware (oder die Multi Material Unit 2.0), um ein " -"neues Filament während eines Werkzeugwechsels zu laden (wenn der T-Code " -"ausgeführt wird). Diese Zeit wird zur Gesamt-Druckzeit vom G-Code-Zeit-" -"Schätzer hinzugefügt." - msgid "Ramming parameters" msgstr "Ramming-Parameter" @@ -11223,24 +14018,14 @@ msgstr "" "Dieser String wird von RammingDialog bearbeitet und enthält ramming-" "spezifische Parameter." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Zeit für die Drucker-Firmware (oder die Multi Material Unit 2.0), um ein " -"Filament während eines Werkzeugwechsels zu entladen (wenn der T-Code " -"ausgeführt wird). Diese Zeit wird zur Gesamt-Druckzeit vom G-Code-Zeit-" -"Schätzer hinzugefügt." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "Ermöglicht das Rammen für Multitool-Setups" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Rammen beim Einsatz eines Multitool-Druckers (d.h. wenn die Option 'Single " "Extruder Multimaterial' in den Druckereinstellungen nicht aktiviert ist). " @@ -11248,56 +14033,70 @@ msgstr "" "dem Werkzeugwechsel schnell auf den Wischturm extrudiert. Diese Option wird " "nur verwendet, wenn der Wischturm aktiviert ist." -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "Multitool-Ramming-Volumen" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Das Volumen, das vor dem Werkzeugwechsel gerammt werden soll." -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "Multitool-Ramming-Fluss" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" "Fluss, der zum Rammen des Filaments vor dem Werkzeugwechsel verwendet wird." msgid "Density" msgstr "Dichte" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Filamentdichte. Nur für statistische Zwecke." -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Filament-Materialtyp" msgid "Soluble material" msgstr "Lösliches Material" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Lösliches Material wird in der Regel für den Druck von Stützen und Stütz-" "Schnittstellen verwendet" +msgid "Filament ramming length" +msgstr "Filament-Ramming-Länge" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" +"Beim Wechseln des Extruders wird empfohlen, eine bestimmte Länge Filament " +"aus dem ursprünglichen Extruder zu extrudieren. Dies hilft, das Tropfen der " +"Düse zu minimieren." + msgid "Support material" msgstr "Stützmaterial" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Stützmaterial wird üblicherweise zum Drucken von Stützen und Stütz-" "Schnittstellen verwendet." +msgid "Filament printable" +msgstr "Filament druckbar" + +msgid "The filament is printable in extruder." +msgstr "Das Filament ist im Extruder druckbar." + msgid "Softening temperature" msgstr "Erweichungstemperatur" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Das Material wird bei dieser Temperatur weich, daher wird dringend " "empfohlen, die vordere Tür zu öffnen und/oder das obere Glas zu entfernen, " @@ -11307,7 +14106,7 @@ msgstr "" msgid "Price" msgstr "Preis" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Filamentpreis. Nur für statistische Zwecke." msgid "money/kg" @@ -11316,7 +14115,7 @@ msgstr "Kosten/kg" msgid "Vendor" msgstr "Hersteller" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Hersteller des Filaments. Nur zur Anzeige." msgid "(Undefined)" @@ -11327,7 +14126,7 @@ msgstr "Richtung des einfachereren Fülling" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "Winkel des Füllmusters, das die Richtung der Linien bestimmt." msgid "Solid infill direction" @@ -11335,57 +14134,91 @@ msgstr "Richtung des massiven Füllmusters" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Winkel des massiven Füllmusters, der die Start- oder Hauptrichtung der Linie " "steuert." -msgid "Rotate solid infill direction" -msgstr "Massives Füllmuster drehen" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Drehe das massive Füllmuster um 90° für jede Schicht." - msgid "Sparse infill density" msgstr "Fülldichte" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" "Dichte der internen Füllung, 100% verwandelt alle interne Füllung in massive " "Füllung und das interne massive Füllmuster wird verwendet." +msgid "Align infill direction to model" +msgstr "Füllrichtung am Modell ausrichten" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Richtet die Füll- und Oberflächenfüllrichtungen so aus, dass sie der " +"Orientierung des Modells auf der Bauplatte folgen. Wenn aktiviert, rotieren " +"die Füllrichtungen mit dem Modell, um optimale Festigkeitseigenschaften zu " +"erhalten." + +msgid "Insert solid layers" +msgstr "Massive Schichten einfügen" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Fügt an bestimmten Schichten massive Füllung ein. Verwenden Sie N, um jede N-" +"te Schicht einzufügen, N#K, um K aufeinanderfolgende massive Schichten alle " +"N Schichten einzufügen (K ist optional, z.B. '5#' entspricht '5#1'), oder " +"eine kommagetrennte Liste (z.B. 1,7,9), um sie in expliziten Schichten " +"einzufügen. Schichten sind 1-basiert." + +msgid "Fill Multiline" +msgstr "Mehrzeilige Füllung" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" +"Verwendung mehrerer Linien für das Füllmuster, wenn vom Füllmuster " +"unterstützt." + msgid "Sparse infill pattern" msgstr "Füllmuster" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Linienmuster für innere Füllung." -msgid "Grid" -msgstr "Gitternetz" +msgid "Zig Zag" +msgstr "Zick-Zack" + +msgid "Cross Zag" +msgstr "Kreuz-Zick-Zack" + +msgid "Locked Zag" +msgstr "Festes Zick-Zack" msgid "Line" msgstr "Linie" -msgid "Cubic" -msgstr "Kubisch" +msgid "Grid" +msgstr "Gitternetz" msgid "Tri-hexagon" msgstr "Tri-Hexagon" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Bienenwabe" +msgid "Cubic" +msgstr "Kubisch" msgid "Adaptive Cubic" msgstr "Adaptiv kubisch" -msgid "3D Honeycomb" -msgstr "3D-Waben" +msgid "Quarter Cubic" +msgstr "Viertel kubisch" msgid "Support Cubic" msgstr "Kubisch Stützen" @@ -11393,9 +14226,59 @@ msgstr "Kubisch Stützen" msgid "Lightning" msgstr "Blitz" +msgid "Honeycomb" +msgstr "Bienenwabe" + +msgid "3D Honeycomb" +msgstr "3D-Waben" + +msgid "Lateral Honeycomb" +msgstr "2D-Waben" + +msgid "Lateral Lattice" +msgstr "2D-Gitter" + msgid "Cross Hatch" msgstr "Kreuzschraffur" +msgid "TPMS-D" +msgstr "TPMS-D" + +msgid "TPMS-FK" +msgstr "TPMS-FK" + +msgid "Gyroid" +msgstr "Gyroid" + +msgid "Lateral lattice angle 1" +msgstr "Gitterwinkel 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Der Winkel des ersten Satzes von 2D-Gitterelementen in der Z-Richtung. Null " +"ist vertikal." + +msgid "Lateral lattice angle 2" +msgstr "Gitterwinkel 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Der Winkel des zweiten Satzes von 2D-Gitterelementen in der Z-Richtung. Null " +"ist vertikal." + +msgid "Infill overhang angle" +msgstr "Überhangwinkel der Füllung" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" +"Der Winkel der schrägen Linien der Füllung. 60° führt zu einer reinen " +"Wabenstruktur." + msgid "Sparse infill anchor length" msgstr "Länge des Infill-Ankers" @@ -11407,7 +14290,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11440,7 +14323,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11458,24 +14341,24 @@ msgstr "" msgid "0 (Simple connect)" msgstr "0 (Einfache Verbindung)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Beschleunigung Außenwände" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Beschleunigung Innenwände" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Beschleunigung Bewegung" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Dies ist die Beschleunigung der Füllung von der obersten Schicht. Die " "Verwendung eines niedrigeren Werts kann die Qualität der Oberfläche " "verbessern." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Beschleunigung der Außenwand: Die Verwendung eines niedrigeren Wertes kann " "die Qualität verbessern." @@ -11489,7 +14372,7 @@ msgstr "" "berechnet." msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² o. %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." @@ -11510,7 +14393,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Beschleunigung der ersten Schicht. Die Verwendung eines niedrigeren Wertes " "kann die Druckbetthaftung verbessern" @@ -11518,7 +14401,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Beschleunigung zu Verzögerung einschalten" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" "Die maximale Beschleunigung und Verzögerung von Klipper wird automatisch " "angepasst" @@ -11528,26 +14411,39 @@ msgstr "Beschleunigung zu Verzögerung" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" "Klipper's max_accel_to_decel wird auf diesen %% der Beschleunigung verändert" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "Default Ruckwert" + +msgid "Junction Deviation" +msgstr "Junction-Deviation" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" +"Marlin Firmware Junction Deviation (ersetzt die traditionelle XY-" +"Ruckeinstellung)" + +msgid "Jerk of outer walls." msgstr "Ruckwert Außenwand" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Ruckwert Innenwand" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Ruckwert Oberseiten" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Ruckwert Füllung" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Ruckwert erste Schicht" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "Jerk for Bewegung" msgid "" @@ -11562,24 +14458,24 @@ msgstr "Höhe der ersten Schicht" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Höhe der ersten Schicht. Eine etwas dickere erste Schicht kann die Haftung " "der Druckplatte verbessern" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Geschwindigkeit der ersten Schicht mit Ausnahme der massiven Füllung." msgid "Initial layer infill" msgstr "Füllung" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Geschwindigkeit des massiven Füllung der ersten Schicht." msgid "Initial layer travel speed" msgstr "Bewegung" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "Bewegungsgeschwindigkeit der ersten Schicht" msgid "Number of slow layers" @@ -11590,13 +14486,13 @@ msgid "" "increased in a linear fashion over the specified number of layers." msgstr "" "Die ersten paar Schichten werden langsamer als normal gedruckt. Die " -"Geschwindigkeitwird allmählich linear über die angegebene Anzahl von " +"Geschwindigkeit wird allmählich linear über die angegebene Anzahl von " "Schichten erhöht." msgid "Initial layer nozzle temperature" msgstr "Düsentemperatur für die erste Schicht" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" "Düsentemperatur zum Drucken der ersten Schicht bei Verwendung dieses " "Filaments" @@ -11625,18 +14521,58 @@ msgid "Support interface fan speed" msgstr "Stützstruktur-Schnittstelle" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." msgstr "" -"Diese Lüftergeschwindigkeit wird während der Stützstruktur verwendet.\n" -"Setzen Sie es auf -1, um dies zu deaktivieren.\n" -"Kann nur durch disable_fan_first_layers außer Kraft gesetzt werden." +"Diese Bauteillüftergeschwindigkeit wird beim Drucken von Stützstrukturen " +"angewendet. Wenn dieser Parameter auf eine höhere als die reguläre " +"Geschwindigkeit eingestellt ist, wird die Schichtbindungsfestigkeit zwischen " +"Stützen und dem gestützten Teil verringert, was das Trennen erleichtert.\n" +"Setzen Sie -1, um es zu deaktivieren.\n" +"Diese Einstellung wird durch disable_fan_first_layers außer Kraft gesetzt." + +msgid "Internal bridges fan speed" +msgstr "Interne Brücken Lüftergeschwindigkeit" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Die Bauteillüftergeschwindigkeit, die für alle internen Brücken verwendet " +"wird. Setzen Sie -1, um die Überhangslüftergeschwindigkeitseinstellungen " +"anstelle davon zu verwenden.\n" +"\n" +"Die Reduzierung der Lüftergeschwindigkeit für interne Brücken im Vergleich " +"zu Ihrer regulären Lüftergeschwindigkeit kann dazu beitragen, das Verziehen " +"von Teilen aufgrund übermäßiger Kühlung über eine große Oberfläche für eine " +"längere Zeit zu reduzieren." + +msgid "Ironing fan speed" +msgstr "Lüftergeschwindigkeit beim Glätten" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Diese Bauteillüftergeschwindigkeit wird beim Glätten angewendet. Wenn dieser " +"Parameter auf eine niedrigere als die reguläre Geschwindigkeit eingestellt " +"wird reduziert sich die mögliche Verstopfung der Düse aufgrund der niedrigen " +"volumetrischen Durchflussrate, wodurch die Oberfläche glatter wird.\n" +"Setzen Sie -1, um es zu deaktivieren." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Diese Einstellung bewirkt, dass der Werkzeugkopf beim Drucken von Wänden " "zufällig zittert, so dass die Oberfläche ein raues, strukturiertes Aussehen " @@ -11655,8 +14591,8 @@ msgid "Fuzzy skin thickness" msgstr "Fuzzy Skin Stärke" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "Die Breite, innerhalb der gezittert werden soll. Sie sollte unter der Breite " "der Außenwandlinie liegen." @@ -11665,8 +14601,8 @@ msgid "Fuzzy skin point distance" msgstr "Fuzzy Skin Punktabstand" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Der durchschnittliche Abstand zwischen den auf jedem Linienabschnitt " "eingeführten Zufallspunkten" @@ -11674,21 +14610,153 @@ msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "Fuzzy Skin auf die erste Schicht anwenden" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." msgstr "Ob Fuzzy Skin auf die erste Schicht angewendet werden soll" +msgid "Fuzzy skin generator mode" +msgstr "Fuzzy Skin Generierungsmodus" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Fuzzy Skin Generierungsmodus. Funktioniert nur mit Arachne!\n" +"Verschiebung: Klassischer Modus, bei dem das Muster durch Verschieben der " +"Düse seitlich vom ursprünglichen Pfad gebildet wird.\n" +" Extrusion: Der Modus, bei dem das Muster durch die Menge des extrudierten " +"Plastiks gebildet wird. Dies ist der schnelle und gerade Algorithmus ohne " +"unnötiges Zittern der Düse, der ein glattes Muster ergibt. Aber esist " +"nützlicher, um lockere Wände in der gesamten Array zu bilden.\n" +"Kombiniert: Gemeinsamer Modus [Verschiebung] + [Extrusion]. Das Aussehen der " +"Wände ist ähnlich wie im Modus [Verschiebung], aber es hinterlässt keine " +"Poren zwischen den Perimetern.\n" +"\n" +"Achtung! Die Modi [Extrusion] und [Kombiniert] funktionieren nur, wenn die " +"fuzzy_skin_thickness-Parameter nicht dicker als die Dicke der gedruckten " +"Schleife ist. Gleichzeitig sollte die Breite der Extrusion für eine " +"bestimmte Schicht auch nicht unter einem bestimmten Niveau liegen. " +"Normalerweise beträgt sie 15-25%% der Schichthöhe. Daher beträgt die " +"maximale Fuzzy Skin Dicke bei einer Perimeterbreite von 0,4 mm und einer " +"Schichthöhe von 0,2 mm 0,4-(0,2*0,25)=±0,35 mm! Wenn Sie einen höheren " +"Parameter als diesen eingeben, wird der Fehler Flow::spacing() angezeigt, " +"und das Modell wird nicht gesliced. Sie können diese Zahl wählen, bis dieser " +"Fehler wiederholt wird. " + +msgid "Displacement" +msgstr "Verschiebung" + +msgid "Extrusion" +msgstr "Extrusion" + +msgid "Combined" +msgstr "Kombiniert" + +msgid "Fuzzy skin noise type" +msgstr "Fuzzy Skin Rauschtyp" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Rauschtyp, der für die Erzeugung von Fuzzy Skin verwendet wird.\n" +"Klassisch: Klassischer gleichmäßiger Zufallsrausch.\n" +"Perlin: Perlin-Rauschen, das eine konsistentere Textur ergibt.\n" +"Billow: Ähnlich wie Perlin-Rauschen, aber klumpiger.\n" +"Ridged Multifractal: Rauschen mit scharfen, gezackten Merkmalen. Erzeugt " +"marmorähnliche Texturen.\n" +"Voronoi: Teilt die Oberfläche in Voronoi-Zellen auf und verschiebt jede um " +"einen zufälligen Wert. Erzeugt eine Patchwork-Textur." + +msgid "Classic" +msgstr "Klassisch" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Ridged Multifractal" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Fuzzy Skin Merkmalsgröße" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Die Basisgröße der kohärenten Rauschmerkmale in mm. Höhere Werte führen zu " +"größeren Merkmalen." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Fuzzy Skin Rauschoktaven" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Die Anzahl der Oktaven des kohärenten Rauschens, die verwendet werden. " +"Höhere Werte erhöhen das Detail des Rauschens, erhöhen aber auch die " +"Berechnungszeit." + +msgid "Fuzzy skin noise persistence" +msgstr "Fuzzy Skin Rauschpersistenz" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Die Abnahmerate für höhere Oktaven des kohärenten Rauschens. Niedrigere " +"Werte führen zu glatterem Rauschen." + msgid "Filter out tiny gaps" msgstr "Filtert winzige Lücken aus" msgid "Layers and Perimeters" msgstr "Schichten und Perimeter" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtert Lücken aus, die kleiner als der angegebene Schwellenwert sind" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Drucken Sie keine Lückenfüllung mit einer Länge, die kleiner als der " +"angegebene Schwellenwert (in mm) ist. Diese Einstellung gilt für die obere, " +"untere und massive Füllung und, wenn der klassische Perimeter-Generator " +"verwendet wird, für die Wandlückenfüllung." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Geschwindigkeit für die Lückenfüllung. Lücken haben normalerweise eine " "unregelmäßige Linienbreite und sollten deshalb langsamer gedruckt werden." @@ -11697,7 +14765,7 @@ msgid "Precise Z height" msgstr "Präzise Z-Höhe" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11711,16 +14779,16 @@ msgstr "Als Bogen drucken" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" "Aktivieren Sie diese Option, um eine G-Code-Datei zu erhalten, die G2- und " -"G3-Bewegungen enthält. Die Passungstoleranz entspricht der Auflösung. \n" +"G3-Bewegungen enthält. Die Passungstoleranz entspricht der Auflösung.\n" "\n" "Hinweis: Für Klipper-Maschinen wird empfohlen, diese Option zu deaktivieren. " "Klipper profitiert nicht von Bogenbefehlen, da diese von der Firmware wieder " @@ -11731,17 +14799,18 @@ msgstr "" msgid "Add line number" msgstr "Liniennummer hinzufügen" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Aktivieren Sie diese Option, um die Zeilennummer (Nx) am Anfang jeder G-Code-" -"Zeile einzufügen" +"Zeile einzufügen." msgid "Scan first layer" msgstr "Erste Schicht scannen" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Aktivieren Sie diese Option, damit die Kamera des Druckers die Qualität der " "ersten Schicht überprüft." @@ -11751,7 +14820,7 @@ msgstr "Düsentyp" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Das metallische Material der Düse. Dies bestimmt die Abriebfestigkeit der " "Düse und welche Art von Filamenten gedruckt werden kann." @@ -11765,6 +14834,9 @@ msgstr "Gehärteter Stahl" msgid "Stainless steel" msgstr "Edelstahl" +msgid "Tungsten carbide" +msgstr "Wolframkarbid" + msgid "Brass" msgstr "Messing" @@ -11784,7 +14856,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Druckerstruktur" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Die physische Anordnung und Komponenten eines Druckers" msgid "CoreXY" @@ -11818,10 +14890,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Starte den Lüfter diese Anzahl an Sekunden früher. (du kannst auch Milli-" @@ -11858,7 +14930,7 @@ msgstr "" msgid "Time cost" msgstr "Druckzeit Kosten" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "Die Druckkosten pro Stunde" msgid "money/h" @@ -11888,8 +14960,8 @@ msgstr "" msgid "G-code flavor" msgstr "G-Code Typ" -msgid "What kind of gcode the printer is compatible with" -msgstr "Mit welcher Art von G-Code ist der Drucker kompatibel" +msgid "What kind of G-code the printer is compatible with." +msgstr "Mit welcher Art von G-Code ist der Drucker kompatibel." msgid "Klipper" msgstr "Klipper" @@ -11897,13 +14969,15 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Pellet-Modifizierter Drucker" -msgid "Enable this option if your printer uses pellets instead of filaments" -msgstr "aktivieren Sie diese Option, wenn Ihr Drucker Pellets anstelle von Filamenten verwendet" +msgid "Enable this option if your printer uses pellets instead of filaments." +msgstr "" +"aktivieren Sie diese Option, wenn Ihr Drucker Pellets anstelle von " +"Filamenten verwendet" msgid "Support multi bed types" msgstr "Unterstützung mehrerer Betttypen" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" "Aktivieren Sie diese Option, wenn Sie mehrere Betttypen verwenden möchten" @@ -11911,7 +14985,7 @@ msgid "Label objects" msgstr "Objekte beschriften" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11925,7 +14999,7 @@ msgstr "" msgid "Exclude objects" msgstr "Objekte ausschließen" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" "Aktivieren Sie diese Option, um den Befehl EXCLUDE OBJECT im G-Code " "hinzuzufügen." @@ -11954,6 +15028,172 @@ msgstr "" "gemeinsam zu drucken und Zeit zu sparen. Die Wand wird weiterhin mit der " "ursprünglichen Schichthöhe gedruckt." +msgid "Infill shift step" +msgstr "Füllverschiebungsschritt" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Dieser Parameter fügt jeder Schicht der Füllung eine leichte Verschiebung " +"hinzu, um eine Kreuzstruktur zu erzeugen." + +msgid "Sparse infill rotation template" +msgstr "Infill-Rotationsvorlage" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Drehen Sie die Richtung der spärlichen Füllung pro Schicht mit einer Vorlage " +"von Winkeln. Geben Sie durch Kommas getrennte Grad ein (z.B. '0,30,60,90'). " +"Winkel werden schichtweise in der Reihenfolge angewendet und wiederholt, " +"wenn die Liste endet. Erweiterte Syntax wird unterstützt: '+5' dreht +5° " +"jede Schicht; '+5#5' dreht +5° alle 5 Schichten. Siehe das Wiki für Details. " +"Wenn eine Vorlage festgelegt ist, wird die Standardfüllrichtungseinstellung " +"ignoriert. Beachten Sie: Einige Füllmuster (z.B. Gyroid) steuern die " +"Rotation selbst; verwenden Sie sie mit Vorsicht." + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Rotationsvorlage für massive Füllung" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Dieser Parameter fügt jeder Schicht der massiven Füllung eine Rotation " +"hinzu, um eine Kreuzstruktur zu erzeugen.Die Vorlage ist eine durch Kommas " +"getrennte Liste von Winkeln in Grad, z.B. '0,90'. Der erste Winkel wird auf " +"die erste Schicht angewendet, der zweite Winkel auf die zweite Schicht usw. " +"Wenn es mehr Schichten als Winkel gibt, werden die Winkel wiederholt. " +"Beachten Sie, dass nicht alle massiven Füllmuster eine Rotation unterstützen." + +msgid "Skeleton infill density" +msgstr "Dichte der Skelettfüllung" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"Der verbleibende Teil des Modellkonturs nach dem Entfernen einer bestimmten " +"Tiefe von der Oberfläche wird als Skelett bezeichnet. Dieser Parameter wird " +"verwendet, um die Dichte dieses Abschnitts anzupassen.Wenn zwei Regionen die " +"gleichen spärlichen Füllungseinstellungen, aber unterschiedliche " +"Skelettdichten aufweisen, werden sich ihre Skelettbereiche überlappen." + +msgid "Skin infill density" +msgstr "Dichte der Außenhautfüllung" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"Der Teil der äußeren Oberfläche des Modells innerhalb eines bestimmten " +"Tiefenbereichs wird als Haut bezeichnet. Dieser Parameter wird verwendet, um " +"die Dichte dieses Abschnitts anzupassen.Wenn zwei Regionen die gleichen " +"spärlichen Füllungseinstellungen, aber unterschiedliche Hautdichten " +"aufweisen, wird dieser Bereich nicht in zwei separate Regionen aufgeteilt." + +msgid "Skin infill depth" +msgstr "Tiefe der Außenhautfüllung" + +msgid "The parameter sets the depth of skin." +msgstr "Parameter legt die Tiefe der Haut fest." + +msgid "Infill lock depth" +msgstr "Sperrtiefe der Füllung" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" +"Dieser Parameter legt die Überlappungstiefe zwischen dem Inneren und der " +"Außenhaut fest." + +msgid "Skin line width" +msgstr "Linienbreite der Außenhautfüllung" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Passen Sie die Linienbreite der ausgewählten Hautpfade an." + +msgid "Skeleton line width" +msgstr "Linienbreite der Skelettfüllung" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Passen Sie die Linienbreite der ausgewählten Skelettpfade an." + +msgid "Symmetric infill Y axis" +msgstr "Symmetrische Füllung Y-Achse" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Wenn das Modell zwei Teile hat, die symmetrisch zur Y-Achse sind, und Sie " +"möchten, dass diese Teile symmetrische Texturen haben, klicken Sie bitte auf " +"diese Option auf einem der Teile." + +msgid "Infill combination - Max layer height" +msgstr "Kombinieren der Füllung - Maximale Schichthöhe" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Maximale Schichthöhe für die kombinierte spärliche Füllung.\n" +"\n" +"Setzen Sie sie auf 0 oder 100%, um den Düsendurchmesser zu verwenden (für " +"eine maximale Reduzierung der Druckzeit) oder einen Wert von ~80%, um die " +"Festigkeit der spärlichen Füllung zu maximieren.\n" +"\n" +"Die Anzahl der Schichten, über die die Füllung kombiniert wird, wird durch " +"Division dieses Werts durch die Schichthöhe abgeleitet und auf die nächste " +"Dezimalstelle abgerundet.\n" +"\n" +"Verwenden Sie entweder absolute mm-Werte (z. B. 0,32 mm für eine 0,4 mm " +"Düse) oder % Werte (z. B. 80%). Dieser Wert darf nicht größer als der " +"Düsendurchmesser sein." + +msgid "Enable clumping detection" +msgstr "Klumpen-Erkennung aktivieren" + +msgid "Clumping detection layers" +msgstr "Klumpen-Erkennungsschichten" + +msgid "Clumping detection layers." +msgstr "Klumpen-Erkennungsschichten." + +msgid "Probing exclude area of clumping" +msgstr "Klumpen-Ausschlussbereich abtasten" + +msgid "Probing exclude area of clumping." +msgstr "Klumpen-Ausschlussbereich abtasten." + msgid "Filament to print internal sparse infill." msgstr "Filament für den Druck der inneren Füllung." @@ -11987,9 +15227,9 @@ msgstr "Überlappung des oberen/unteren massiven Füllung/Wand" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "Der obere massive Füllbereich wird leicht vergrößert, um mit der Wand zu " "überlappen und eine bessere Haftung zu gewährleisten und das Auftreten von " @@ -11998,16 +15238,22 @@ msgstr "" "minimieren. Der Prozentwert bezieht sich auf die Linienbreite der spärlichen " "Füllung." -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Geschwindigkeit der inneren Füllung" +msgid "Inherits profile" +msgstr "Übernimmt Profil" + +msgid "Name of parent profile." +msgstr "Name des übergeordneten Profils" + msgid "Interface shells" msgstr "Support-Verbindung" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Erzwingen der Erstellung von festen Hüllen zwischen benachbarten Materialien/" "Volumina“ ist eine Funktion, die bei Drucken mit mehreren Extrudern " @@ -12025,10 +15271,16 @@ msgstr "" msgid "Interlocking depth of a segmented region" msgstr "Interlock-Struktur-Tiefe eines segmentierten Bereichs" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Interlock-Struktur-Tiefe eines segmentierten Bereichs. Null deaktiviert diese " -"Funktion." +"Interlock-Tiefe eines segmentierten Bereichs. Es wird ignoriert, wenn " +"\"mmu_segmented_region_max_width\" null ist oder wenn " +"\"mmu_segmented_region_interlocking_depth\" größer ist als " +"\"mmu_segmented_region_max_width\". Null deaktiviert diese Funktion." msgid "Use beam interlocking" msgstr "Verwende Interlock-Strukturen" @@ -12039,8 +15291,8 @@ msgid "" "models printed in different materials." msgstr "" "Erzeugen Sie eine verzahnte Struktur an den Stellen, an denen sich " -"unterschiedliche Filamente berühren. Dies verbessert die Haftung zwischen den " -"Filamenten, insbesondere bei Modellen, die aus verschiedenen Materialien " +"unterschiedliche Filamente berühren. Dies verbessert die Haftung zwischen " +"den Filamenten, insbesondere bei Modellen, die aus verschiedenen Materialien " "gedruckt werden." msgid "Interlocking beam width" @@ -12056,7 +15308,7 @@ msgid "Orientation of interlock beams." msgstr "Ausrichtung der Interlock-Strukturen." msgid "Interlocking beam layers" -msgstr "Interlock-Struktur Schichten" +msgstr "Interlock-Struktur Schichten" msgid "" "The height of the beams of the interlocking structure, measured in number of " @@ -12072,9 +15324,9 @@ msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" -"Der Abstand von der Grenze zwischen den Filamenten, um die Interlock-Strukturen-" -"zu generieren, gemessen in Zellen. Zu wenige Zellen führen zu einer schlechten " -"Haftung." +"Der Abstand von der Grenze zwischen den Filamenten, um die Interlock-" +"Strukturen-zu generieren, gemessen in Zellen. Zu wenige Zellen führen zu " +"einer schlechten Haftung." msgid "Interlocking boundary avoidance" msgstr "Vermeidung von Interlock-Strukturgrenzen" @@ -12083,8 +15335,8 @@ msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" -"Der Abstand von der Außenseite eines Modells, an dem keine Interlock-Strukturen " -"generiert werden, gemessen in Zellen." +"Der Abstand von der Außenseite eines Modells, an dem keine Interlock-" +"Strukturen generiert werden, gemessen in Zellen." msgid "Ironing Type" msgstr "Glättungsmethode" @@ -12112,7 +15364,7 @@ msgstr "Alle soliden Schichten" msgid "Ironing Pattern" msgstr "Bügelmuster" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "Das Muster, das beim Glätten verwendet wird" msgid "Ironing flow" @@ -12120,7 +15372,7 @@ msgstr "Materialmenge" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Die Materialmenge, die während des Glättens extrudiert wird. Dies ist " "relativ zum Fluss der normalen Schichthöhe. Ein zu hoher Wert führt zu einer " @@ -12129,35 +15381,50 @@ msgstr "" msgid "Ironing line spacing" msgstr "Abstand der Glättlinien" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Der Abstand zwischen den Linien beim Glätten" +msgid "Ironing inset" +msgstr "Glättabstand" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Der Abstand zu den Kanten. Ein Wert von 0 setzt dies auf die Hälfte des " +"Düsen Durchmessers" + msgid "Ironing speed" msgstr "Geschwindigkeit beim Glätten" -msgid "Print speed of ironing lines" -msgstr "Druckgeschwindigkeit der Glättlinien" +msgid "Print speed of ironing lines." +msgstr "Druckgeschwindigkeit der Glättlinien." -msgid "Ironing angle" -msgstr "Glättwinkel" +msgid "Ironing angle offset" +msgstr "Glättwinkelversatz" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." -msgstr "" -"Der Winkel, in dem das Glätten durchgeführt wird. Eine negative Zahl " -"deaktiviert diese Funktion und verwendet die Standardmethode." +msgid "The angle of ironing lines offset from the top surface." +msgstr "Der Winkel der Glättlinien, der von der oberen Oberfläche abweicht." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "Fester Glättwinkel" + +msgid "Use a fixed absolute angle for ironing." +msgstr "Verwenden Sie einen festen absoluten Winkel zum Glätten." + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "Dieser G-Code wird bei jedem Schichtwechsel nach dem anheben von Z eingefügt." +msgid "Clumping detection G-code" +msgstr "Klumpen-Erkennungs-G-Code" + msgid "Supports silent mode" msgstr "Unterstützt den Leise-Modus" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Ob das Gerät den Leisen-Modus unterstützt, bei dem das Gerät eine geringere " "Beschleunigung zum Drucken verwendet" @@ -12170,26 +15437,26 @@ msgstr "Maschinengrenzen" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Wenn diese Option aktiviert ist, werden die Maschinengrenzen in die G-Code-" "Datei ausgegeben.\n" "Diese Option wird ignoriert, wenn der G-Code-Typ auf Klipper eingestellt ist." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Dieser G-Code wird für die Druckpause verwendet. Benutzer können den Pausen-" "G-Code in dem G-Code-Viewer einfügen." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Dieser G-Code wird als benutzerdefinierter Code verwendet" msgid "Small area flow compensation (beta)" msgstr "Kleine Flächen-Flusskompensation (Beta)" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "Flusskompensation für kleine Füllbereiche aktivieren" msgid "Flow Compensation Model" @@ -12198,13 +15465,14 @@ msgstr "Flusskompensationsmodell" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" "Flusskompensationsmodell, das verwendet wird, um den Fluss für kleine " -"Füllbereiche anzupassen. Das Modell wird als durch Komma getrenntes Paar von " -"Werten für die Extrusionslänge und die Flusskorrekturfaktoren, eine pro " -"Zeile, im folgenden Format ausgedrückt: \"1.234,5.678\"" +"Füllbereicheanzupassen. Das Modell wird als durch Kommas getrennte Paare von " +"Werten für dieExtrusionslänge und den Flusskorrekturfaktor ausgedrückt. " +"Jedes Paar steht auf einer separaten Zeile, gefolgt von einem Semikolon im " +"folgenden Format: \"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "Maximale Geschwindigkeit X" @@ -12278,6 +15546,19 @@ msgstr "Maximaler Ruck auf der Z-Achse" msgid "Maximum jerk of the E axis" msgstr "Maximaler Ruck auf der E-Achse" +msgid "Maximum Junction Deviation" +msgstr "Maximale Verbindungsabweichung" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" +"Maximale Verbindungsabweichung (M205 J, gilt nur, wenn JD > 0 für Marlin " +"Firmware\n" +"Wenn Ihr Marlin 2 Drucker klassischen Ruck verwendet, setzen Sie diesen Wert " +"auf 0.)" + msgid "Minimum speed for extruding" msgstr "Mindestgeschwindigkeit beim Extrudieren" @@ -12305,54 +15586,77 @@ msgstr "Maximale Beschleunigung beim Rückziehen (M204 R)" msgid "Maximum acceleration for travel" msgstr "Maximale Fahrgeschwindigkeit" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Maximale Fahrgeschwindigkeit (M204 T), gilt nur für Marlin 2" +msgid "Resonance avoidance" +msgstr "Resonanzvermeidung" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" +"Durch die Reduzierung der Geschwindigkeit der äußeren Wand, um die " +"Resonanzzone des Druckers zu vermeiden, werden Ringe auf der Oberfläche des " +"Modells vermieden.\n" +"Bitte schalten Sie diese Option aus, wenn Sie Ringe testen." + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." +msgstr "Minimale Geschwindigkeit der Resonanzvermeidung." + +msgid "Max" +msgstr "Maximal" + +msgid "Maximum speed of resonance avoidance." +msgstr "Maximale Geschwindigkeit der Resonanzvermeidung." + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "Die Drehzahl des Bauteillüfters kann sich erhöhen, wenn die automatische " "Kühlung aktiviert ist. Dies ist die maximale Drehzahlbegrenzung des " "Bauteillüfters." -msgid "Max" -msgstr "Maximal" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Die größte druckbare Schichthöhe für den Extruder. Wird verwendet, um die " +"Die höchste druckbare Schichthöhe für den Extruder. Wird verwendet, um die " "maximale Schichthöhe zu begrenzen, wenn die adaptive Schichthöhe aktiviert " -"ist" +"ist." msgid "Extrusion rate smoothing" msgstr "Glättung der Extrusionsrate" +#, fuzzy msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " "the printer transitions from printing a high flow (high speed/larger width) " "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12364,46 +15668,58 @@ msgstr "" "kleinere Breite) und umgekehrt wechselt.\n" "\n" "Es definiert die maximale Rate, mit der sich der extrudierte Volumenstrom in " -"mm3/s über die Zeit ändern kann. Höhere Werte bedeuten, dass höhere " +"mm³/s über die Zeit ändern kann. Höhere Werte bedeuten, dass höhere " "Extrusionsratenänderungen zulässig sind, was zu schnelleren " "Geschwindigkeitsübergängen führt.\n" "\n" -"Ein Wert von 0 deaktiviert die Funktion. \n" +"Ein Wert von 0 deaktiviert die Funktion.\n" "\n" "Für einen Hochgeschwindigkeits-, Hochfluss-Direktantriebsdrucker (wie den " "Bambu-Labor- oder Voron-Drucker) ist dieser Wert normalerweise nicht " "erforderlich. Er kann jedoch in bestimmten Fällen einen geringfügigen " "Vorteil bieten, in denen sich die Funktionen stark unterscheiden. Zum " "Beispiel, wenn es aggressive Verlangsamungen aufgrund von Überhängen gibt. " -"In diesen Fällen wird ein hoher Wert von ca. 300-350mm3/s2 empfohlen, da " - -msgid "mm³/s²" -msgstr "m" +"In diesen Fällen wird ein hoher Wert von ca. 300-350 mm³/s² empfohlen, da " msgid "Smoothing segment length" msgstr "Segmentlänge für die Glättung" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" "Ein niedrigerer Wert führt zu glatteren Extrusionsratenübergängen. Dies " "führt jedoch zu einer deutlich größeren G-Code-Datei und mehr Anweisungen " -"für den Drucker, die verarbeitet werden müssen. \n" +"für den Drucker, um zu verarbeiten.\n" "\n" -"Der Standardwert von 3 funktioniert für die meisten Fälle gut. Wenn Ihr " +"Der Standardwert von 3 funktioniert in den meisten Fällen gut. Wenn Ihr " "Drucker stottert, erhöhen Sie diesen Wert, um die Anzahl der Anpassungen zu " -"reduzieren\n" +"reduzieren.\n" "\n" -"Zulässige Werte: 1-5" +"Zulässige Werte: 0,5-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "Nur auf externe Funktionen anwenden" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Wendet die Extrusionsraten-Glättung nur auf externe Umfänge und Überhänge " +"an. Dies kann dazu beitragen, Artefakte aufgrund scharfer Geschwindigkeits-" +"übergänge an extern sichtbaren Überhängen zu reduzieren, ohne die Druck-" +"geschwindigkeit von Funktionen zu beeinträchtigen, die für den Benutzer " +"nicht sichtbar sind." + +msgid "Minimum speed for part cooling fan." msgstr "Mindestdrehzahl der Bauteilkühlung" msgid "" @@ -12419,33 +15735,27 @@ msgstr "" "Bitte aktivieren Sie den Hilfsventilator in den Druckereinstellungen, um " "diese Funktion zu verwenden. G-Code-Befehl: M106 P2 S(0-255)" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Die niedrigste druckbare Schichthöhe für den Extruder. Wird verwendet, um " -"die minimale Schichthöhe zu begrenzen, wenn die adaptive Schichthöhe " -"aktiviert ist" +"Die niedrigste druckbare Schichthöhe für den Extruder. Wird verwendet,um die " +"minimale Schichthöhe zu begrenzen, wenn die adaptive Schichthöhe aktiviert " +"ist." msgid "Min print speed" msgstr "Minimale Druckgeschwindigkeit" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"Die minimale Druckgeschwindigkeit, die der Drucker einhält, um zu versuchen, " -"die minimale Schichtzeit einzuhalten, wenn die Verlangsamung für eine " +"Das minimale Drucktempo, bei dem der Drucker verlangsamt wird, um die oben " +"definierte minimale Schichtzeit einzuhalten, wenn die Verlangsamung für eine " "bessere Schichtkühlung aktiviert ist." -msgid "Nozzle diameter" -msgstr "Düsendurchmesser" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Düsendurchmesser" msgid "Configuration notes" @@ -12471,7 +15781,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Volumen der Düse" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Volumen der Düse zwischen dem Messer und dem Ende der Düse" msgid "Cooling tube position" @@ -12517,7 +15827,7 @@ msgstr "Zusätzliche Länge beim Laden" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Wenn der Wert auf Null gesetzt ist, ist die Entfernung, die das Filament " @@ -12538,7 +15848,7 @@ msgstr "Rückzug bei der Füllung verringern" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Kein Rückzug, wenn sich die Bewegung des Druckkopfes vollständig in einem " "Füllbereich befindet. Das bedeutet, dass das herauslaufen des Filaments " @@ -12546,10 +15856,17 @@ msgstr "" "bei komplexeren Modellen verkürzen und Druckzeit sparen, verlangsamt aber " "das Slicen und die G-Code Generierung." +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Diese Option senkt die Temperatur der inaktiven Extruder, um das " +"Herauslaufen des Filaments zu verhindern." + msgid "Filename format" msgstr "Format des Dateinamens" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "Der Benutzer kann den Projektdateinamen beim Export selbst bestimmen" msgid "Make overhangs printable" @@ -12576,15 +15893,12 @@ msgstr "Flächenbereich für druckbare Überhänge von Löchern" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Maximaler Flächenbereich eines Lochs in der Basis des Modells, bevor es mit " "konischem Material gefüllt wird. Ein Wert von 0 füllt alle Löcher in der " "Basis des Modells." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Erkennen von Wandüberhängen" @@ -12597,6 +15911,9 @@ msgstr "" "verwenden hierfür eine unterschiedliche Druckgeschwindigkeiten. Bei einem " "100%% Überhang wird die Brückengeschwindigkeit verwendet." +msgid "Filament to print walls." +msgstr "Filament für den Druck der Wände" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." @@ -12604,10 +15921,10 @@ msgstr "" "Linienbreite der inneren Wand. Wenn als Prozentsatz angegeben, wird sie in " "Bezug auf den Düsendurchmesser berechnet." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Druckgeschwindigkeit der Innenwand" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Anzahl der Wände jeder Schicht" msgid "Alternate extra wall" @@ -12615,20 +15932,20 @@ msgstr "Abwechselnde zusätzliche Wand" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" "Diese Einstellung fügt jeder zweiten Schicht eine zusätzliche Wand hinzu. " "Damit wird die Füllung vertikal zwischen den Wänden eingeklemmt, was zu " -"stärkeren Drucken führt. \n" +"stärkeren Drucken führt.\n" "\n" "Wenn diese Option aktiviert ist, muss die Option zur Sicherstellung der " -"vertikalen Schalendicke deaktiviert werden. \n" +"vertikalen Schalendicke deaktiviert werden.\n" "\n" "Die Verwendung von Lightning Infill zusammen mit dieser Option wird nicht " "empfohlen, da die Füllung begrenzt ist, um die zusätzlichen Umfänge zu " @@ -12647,35 +15964,44 @@ msgstr "" "zur G-Code-Datei als erstes Argument und können die Snapmaker Orca-" "Konfigurationseinstellungen durch Lesen von Umgebungsvariablen abrufen." +msgid "Printer type" +msgstr "Druckertyp" + +msgid "Type of the printer." +msgstr "Typ des Druckers" + msgid "Printer notes" msgstr "Druckernotizen" msgid "You can put your notes regarding the printer here." msgstr "Sie können hier Ihre Notizen zum Drucker eintragen." +msgid "Printer variant" +msgstr "Druckervariante" + msgid "Raft contact Z distance" msgstr "Z Abstand Objekt Druckbasis " -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Z-Abstand zwischen Objekt und Druckbasis. Bei löslicher Oberfläche ignoriert" msgid "Raft expansion" msgstr "Druckbasis Erweiterung" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Druckbasis in der XY-Ebene erweitern" msgid "Initial layer density" msgstr "Dichte der ersten Schicht" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Dichte der ersten Schicht der Druckbasis oder Support" msgid "Initial layer expansion" msgstr "Ausdehnung der ersten Schicht" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Ausdehnung der ersten Druckbasis oder Support-Schicht um die " "Druckplattenhaftung zu verbessern" @@ -12685,34 +16011,34 @@ msgstr "Druckbasisschichten" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Das Objekt wird um diese Anzahl von Stützschichten erhöht. Verwenden Sie " "diese Funktion, um ein verziehen bei ABS zu vermeiden." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Der G-Code-Pfad wird nach der Vereinfachung der Kontur des Modells " "generiert, um zu viele Punkte und G-Code Befehle in der G-Code-Datei zu " "vermeiden. Ein kleinerer Wert bedeutet eine höhere Auflösung und mehr Zeit " -"zum Slicen" +"zum Slicen." msgid "Travel distance threshold" msgstr "Schwellenwert für die Fahrstrecke" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "Rückzug nur auslösen, wenn der Fahrweg länger als diese Schwelle ist" msgid "Retract amount before wipe" msgstr "Rückzugsmenge vor der Reinigung" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "Die Länge des schnellen Rückzugs vor dem Abwischen, relativ zur " "Rückzugslänge." @@ -12720,7 +16046,7 @@ msgstr "" msgid "Retract when change layer" msgstr "Zurückziehen beim Schichtwechsel" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Erzwingen eines Rückzugs beim Schichtwechsel" msgid "Retraction Length" @@ -12728,22 +16054,22 @@ msgstr "Rückzugslänge" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Menge an Material im Extruder zurückgezogen wird, um ein herauslaufen des " -"Filaments bei langen Verfahrwegen zu vermeiden. Null deaktiviert dein " -"Rückzug." +"Einige Materialmengen im Extruder werden zurückgezogen, um das Herauslaufen " +"bei langen Fahrten zu vermeiden. Setzen Sie den Wert auf Null, um den " +"Rückzug zu deaktivieren." -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "Langer Rückzug beim Schneiden (experimentell)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimentelle Funktion. Rückzug und Abschneiden des Filaments bei einem " +"Experimentelle Funktion: Rückzug und Abschneiden des Filaments bei einem " "längeren Abstand während des Wechsels, um den Reinigungsvorgang zu " "minimieren. Obwohl dies den Reinigungsvorgang erheblich reduziert, kann es " "auch das Risiko von Düsenverstopfungen oder anderen Druckproblemen erhöhen." @@ -12752,48 +16078,57 @@ msgid "Retraction distance when cut" msgstr "Rückzugslänge beim Schneiden" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimentelle Funktion. Rückzugslänge vor dem Abschneiden beim Filament-" +"Experimentelle Funktion: Rückzugslänge vor dem Abschneiden beim Filament-" "Wechsel" -msgid "Z hop when retract" -msgstr "Z-Hop beim Rückzug" +msgid "Long retraction when extruder change" +msgstr "Langer Rückzug beim Extruderwechsel" + +msgid "Retraction distance when extruder change" +msgstr "Rückzugslänge beim Extruderwechsel" + +msgid "Z-hop height" +msgstr "Z-Hub-Höhe" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Bei jedem Rückzug wird die Düse ein wenig angehoben, um einen Abstand " "zwischen Düse und Druck zu schaffen. Dadurch wird verhindert, dass die Düse " "bei der Verfahrbewegung gegen den Druck stößt. Die Verwendung einer " "Spirallinie zum Anheben von z kann Fadenbildung verhindern." -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Z-Hub untere Grenze" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Z-Hub wird nur wirksam, wenn Z über diesem Wert liegt und unter dem " -"Parameter: \"Z-Hub obere Grenze\" liegt" +"Parameter: \"Z-Hub obere Grenze\" liegt." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Z-Hub obere Grenze" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Wenn dieser Wert positiv ist, wird der Z-Hub nur wirksam, wenn Z über dem " -"Parameter: \"Z-Hub untere Grenze\" liegt und unter diesem Wert liegt" +"Parameter: \"Z-Hub untere Grenze\" liegt und unter diesem Wert liegt." -msgid "Z hop type" +msgid "Z-hop type" msgstr "Z-Hub Typ" +msgid "Type of Z-hop." +msgstr "Typ des Z-Hops." + msgid "Slope" msgstr "Steigung" @@ -12804,11 +16139,11 @@ msgid "Traveling angle" msgstr "Bewegungswinkel" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" "Bewegungswinkel für den Z-Hub-Typ \"Steigung\" und \"Spirale\". Wenn Sie es " -"auf 90° einstellen, erhalten Sie eine normale Anhebung" +"auf 90° einstellen, erhalten Sie eine normale Anhebung." msgid "Only lift Z above" msgstr "Nur Z anheben über" @@ -12834,7 +16169,7 @@ msgid "On surfaces" msgstr "Auf Oberflächen" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Verhalten des Z-Hops erzwingen. Diese Einstellung wird von den oben " @@ -12852,6 +16187,18 @@ msgstr "Nur Unten" msgid "Top and Bottom" msgstr "Oben und Unten" +msgid "Direct Drive" +msgstr "Direktantrieb" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "Düsenvolumentyp" + +msgid "Default Nozzle Volume Type." +msgstr "Standard-Düsenvolumentyp." + msgid "Extra length on restart" msgstr "Zusätzliche Länge beim Neustart" @@ -12873,18 +16220,18 @@ msgstr "" msgid "Retraction Speed" msgstr "Rückzugsgeschwindigkeit" -msgid "Speed of retractions" -msgstr "Geschwindigkeit für den Rückzug" +msgid "Speed for retracting filament from the nozzle." +msgstr "Geschwindigkeit für den Rückzug von Filament aus der Düse." -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Wiedereinzugsgeschwindigkeit" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Geschwindigkeit für das Einziehen von Filament in den Extruder nach einem " -"Rückzug. Null bedeutet die gleiche Geschwindigkeit wie der Rückzug." +"Geschwindigkeit für das Nachladen von Filament in die Düse. Null bedeutet " +"die gleiche Geschwindigkeit wie beim Rückzug." msgid "Use firmware retraction" msgstr "Filament Rückzug durch Firmware" @@ -12904,15 +16251,15 @@ msgid "Disable set remaining print time" msgstr "Deaktiviere die verbleibende Druckzeit" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Deaktiviert das Generieren von M73: Setze die verbleibende Druckzeit im " -"endgültigen G-Code" +"endgültigen G-Code." msgid "Seam position" msgstr "Nahtposition" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Die Startposition für den Druck jedes Teils der Außenwand" msgid "Nearest" @@ -12921,6 +16268,9 @@ msgstr "Nächste" msgid "Aligned" msgstr "Ausgerichtet" +msgid "Aligned back" +msgstr "Ausgerichtet hinten" + msgid "Back" msgstr "Rückseite" @@ -13010,13 +16360,13 @@ msgstr "Schrägnaht Geschwindigkeit" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Diese Option legt die Druckgeschwindigkeit für Schrägnähte fest. Es wird " "empfohlen, Schrägnähte mit einer langsamen Geschwindigkeit (weniger als 100 " @@ -13081,9 +16431,10 @@ msgid "Role base wipe speed" msgstr "Rollenbasierte Wipe Geschwindigkeit" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "Die Wischengeschwindigkeit wird durch die Geschwindigkeit der aktuellen " "Extrusion bestimmt.\n" @@ -13106,21 +16457,21 @@ msgid "Wipe before external loop" msgstr "Wischbewegung vor äußerer Schleife" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Um die Sichtbarkeit einer möglichen Überextrusion am Anfang eines äußeren " "Umfangs zu minimieren, wenn mit der Druckreihenfolge \"Außen/Innen\" oder " "\"Innen/Außen/Innen\" gedruckt wird, wird der Rückzug etwas nach innen vom " "Anfang des äußeren Umfangs ausgeführt. Auf diese Weise wird eine mögliche " -"Überextrusion von der Außenfläche verdeckt. \n" +"Überextrusion von der Außenfläche verdeckt.\n" "\n" "Dies ist nützlich, wenn mit der Druckreihenfolge \"Außen/Innen\" oder " "\"Innen/Außen/Innen\" gedruckt wird, da in diesen Modi ein äußerer Umfang " @@ -13131,9 +16482,9 @@ msgstr "Wipe Geschwindigkeit" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "Die Wischengeschwindigkeit wird durch die im Konfigurationsmenü angegebene " "Geschwindigkeit bestimmt.Wenn der Wert als Prozentsatz (z.B. 80%) angegeben " @@ -13143,55 +16494,82 @@ msgstr "" msgid "Skirt distance" msgstr "Abstand der Umrandung" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Abstand von der Umrandung zum Rand oder zum Objekt" +msgid "Skirt start point" +msgstr "Startpunkt der Umrandung" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Winkel vom Objektzentrum zum Startpunkt der Umrandung. Null ist die " +"rechteste Position, gegen den Uhrzeigersinn ist der Winkel positiv." + msgid "Skirt height" msgstr "Höhe der Umrandungsringe" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "Wie viele Schichten des Skirts. Normalerweise nur eine Schicht." +msgid "Single loop after first layer" +msgstr "Single Loop nach der ersten Schicht" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Begrenzt die Umrandungs- / Luftzug-Schutz-Schleifen auf eine Wand nach der " +"ersten Schicht. Dies ist nützlich, um Filament zu sparen, kann jedoch dazu " +"führen, dass der Luftzug-Schutz / die Umrandung verzieht oder bricht." + msgid "Draft shield" msgstr "Luftzug-Schutz" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"Ein Luftzugs-Schutz ist nützlich, um einen ABS- oder ASA-Druck vor Verzug " -"und Ablösen vom Druckbett aufgrund von Luftzug zu schützen. Er wird " -"normalerweise nur bei offenen Druckern benötigt, d.h. ohne Gehäuse. \n" +"Ein Luftzug-Schutz ist nützlich, um einen ABS- oder ASA-Druck vor Verzug und " +"dem Ablösen vom Druckbett aufgrund von Windzug zu schützen. Er wird " +"normalerweise nur bei offenen Druckern benötigt, d.h. ohne Gehäuse.\n" "\n" -"Optionen:\n" -"Aktiviert = Umrandung ist so hoch wie das höchste gedruckte Objekt.\n" -"Begrenzt = Umrandung ist so hoch wie durch die Höhe der Umrandung " -"angegeben.\n" -"\n" -"Hinweis: Mit dem aktiven Luftzug-Schutz wird die Umrandung in der " +"Aktiviert = Umrandung ist so hoch wie das höchste gedruckte Objekt. " +"Andernfalls wird 'Höhe der Umrandung' verwendet.\n" +"Hinweis: Mit aktiviertem Luftzug-Schutz wird die Umrandung in der " "Umrandungsdistanz vom Objekt gedruckt. Daher kann es bei aktiven Rändern zu " -"Überschneidungen kommen. Um dies zu vermeiden, erhöhen Sie den Wert " -"derUmrandungsdistanz. \n" - -msgid "Limited" -msgstr "Begrenzt" +"Überschneidungen kommen. Um dies zu vermeiden, erhöhen Sie den Wert der " +"Umrandungsdistanz.\n" msgid "Enabled" msgstr "Aktiviert" +msgid "Skirt type" +msgstr "Art der Umrandung" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Kombiniert - eine Umrandung für alle Objekte, Pro Objekt - individuelle " +"Objektumrandung." + +msgid "Per object" +msgstr "Pro Objekt" + msgid "Skirt loops" msgstr "Anzahl Umrandungsringe" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "" "Anzahl der Ringe für die Umrandung. Null bedeutet Deaktivierung der Umrandung" @@ -13210,33 +16588,45 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" "Minimale Filamentextrusionslänge in mm beim Drucken der Umrandung. Null " "bedeutet, dass diese Funktion deaktiviert ist.\n" "\n" "Die Verwendung eines Werts ungleich Null ist nützlich, wenn der Drucker so " -"eingestellt ist, dass er ohne eine Primelinie druckt." +"eingestellt ist, dass er ohne eine Primelinie druckt.\n" +"Die endgültige Anzahl der Schleifen wird nicht berücksichtigt, wenn die " +"Objektabstände angeordnet oder validiert werden. Erhöhen Sie die Anzahl der " +"Schleifen in einem solchen Fall." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Die Druckgeschwindigkeit im exportierten G-Code wird verlangsamt, wenn die " "geschätzte Schichtzeit kürzer als dieser Wert ist, um eine bessere Kühlung " -"für diese Schichten zu erreichen" +"für diese Schichten zu erreichen." msgid "Minimum sparse infill threshold" msgstr "Mindestschwelle für Füllung" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Innere Füllbereiche, die kleiner als dieser Wert sind, werden durch massive " "Füllungen ersetzt." +msgid "Solid infill" +msgstr "Massive Füllung" + +msgid "Filament to print solid infill." +msgstr "Filament für den Druck der massiven Füllung" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." @@ -13244,15 +16634,15 @@ msgstr "" "Linienbreite des internen massiven Infill. Wenn als Prozentsatz angegeben, " "wird sie in Bezug auf den Düsendurchmesser berechnet." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Geschwindigkeit der inneren massiven Füllungen, ohne die obere oder untere " "Oberfläche." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Aktiviert die Spiralisierung, welche die Z-Bewegungen der Außenkontur " "glättet und verwandelt ein Volumenmodell in einen einwandigen Druck mit " @@ -13263,8 +16653,8 @@ msgid "Smooth Spiral" msgstr "Gleichmäßig Spirale" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "Die gleichmäßige Spirale glättet auch die X- und Y-Bewegungen, so dass keine " "Naht sichtbar ist, auch nicht in den XY-Richtungen an Wänden, die nicht " @@ -13273,14 +16663,44 @@ msgstr "" msgid "Max XY Smoothing" msgstr "Maximale XY-Glättung" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Maximaler Abstand, um Punkte in XY zu verschieben, um eine glatte Spirale zu " "erreichen. Wenn als Prozentsatz angegeben, wird er in Bezug auf den " "Düsendurchmesser berechnet." +msgid "Spiral starting flow ratio" +msgstr "Spirale Startflussverhältnis" + +#, fuzzy, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Legt das Startflussverhältnis beim Übergang von der letzten unteren Schicht " +"zur Spirale fest. Normalerweise skaliert der Spiralenübergang das " +"Flussverhältnis von 0% auf 100% während der ersten Schleife, was in einigen " +"Fällen zu einer Unterextrusion am Anfang der Spirale führen kann." + +msgid "Spiral finishing flow ratio" +msgstr "Spirale Endflussverhältnis" + +#, fuzzy, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Legt das Endflussverhältnis beim Beenden der Spirale fest. Normalerweise " +"skaliert die Spiralenübergang das Flussverhältnis von 100% auf 0% während " +"der letzten Schleife, was in einigen Fällen zu einer Unterextrusion am Ende " +"der Spirale führen kann." + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " @@ -13307,19 +16727,54 @@ msgstr "Traditionell" msgid "Temperature variation" msgstr "Temperaturvariation" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Temperaturunterschied, der angewendet wird, wenn ein Extruder nicht aktiv " +"ist. Der Wert wird nicht verwendet, wenn 'idle_temperature' in den Filament-" +"Einstellungen auf einen Wert ungleich Null gesetzt ist." + +msgid "Preheat time" +msgstr "Vorheizzeit" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Um die Wartezeit nach dem Werkzeugwechsel zu reduzieren, kann Orca das " +"nächste Werkzeug vorheizen, während das aktuelle Werkzeug noch in Gebrauch " +"ist. Diese Einstellung gibt die Zeit in Sekunden an, um das nächste Werkzeug " +"vorzuheizen. Orca fügt einen M104-Befehl ein, um das Werkzeug im Voraus zu " +"vorzuheizen." + +msgid "Preheat steps" +msgstr "Vorheizschritte" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Fügen Sie mehrere Vorheizbefehle ein (z.B. M104.1). Nur nützlich für Prusa " +"XL. Für andere Drucker bitte auf 1 setzen." + msgid "Start G-code" msgstr "Start G-Code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "G-Code hinzufügen, wenn der Druckvorgang beginnt" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "G-Code hinzufügen, wenn der Druck dieses Filaments beginnt" msgid "Single Extruder Multi Material" msgstr "Einzelner Extruder, mehrere Materialien" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "Benutze eine einzelne Düse zum Drucken mit mehreren Filamenten" msgid "Manual Filament Change" @@ -13340,18 +16795,18 @@ msgstr "" msgid "Purge in prime tower" msgstr "Reinige im Reinigungsturm" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "Reinige das restliche Filament im Reinigungsturm" msgid "Enable filament ramming" -msgstr "Filamentrammen aktivieren" +msgstr "Erlaube Filamentrammen" msgid "No sparse layers (beta)" msgstr "Keine dünnen Schichten (Beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -13424,32 +16879,40 @@ msgid "Enable support generation." msgstr "Erzeugung von Stützstrukturen aktivieren." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"Normal (auto) und Baum (auto) werden verwendet, um automatisch " -"Stützstrukturen zu generieren. Wenn Normal (manuell) oder Baum (manuell) " -"ausgewählt ist, werden nur Stützerzwinger erzeugt." +"Normal (auto) und Tree (auto) werden verwendet, um Stützstrukturen " +"automatisch zu generieren. Wenn Normal (manual) oder Tree (manual) " +"ausgewählt wird, werden nur Stützverstärker generiert." -msgid "normal(auto)" -msgstr "Normal (auto)" +msgid "Normal (auto)" +msgstr "Normal (automatisch)" -msgid "tree(auto)" -msgstr "Baum (auto)" +msgid "Tree (auto)" +msgstr "Baum (automatisch)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "Normal (manuell)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "Baum (manuell)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Stützen/Objekt XY-Abstand" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "XY-Abstand zwischen einem Objekt und seinen Stützstrukturen." +msgid "Support/object first layer gap" +msgstr "Stützen/Objekt Abstand der ersten Schicht" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" +"XY-Abstand zwischen einem Objekt und seinen Stützstrukturen in der ersten " +"Schicht." + msgid "Pattern angle" msgstr "Winkel des Musters" @@ -13461,7 +16924,7 @@ msgstr "" msgid "On build plate only" msgstr "Nur auf Druckplatte" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "" "Stützen nicht auf der Modelloberfläche, sondern nur auf der Druckplatte " "erzeugen" @@ -13476,24 +16939,23 @@ msgstr "" "Erstelle nur Stützstrukturen für kritische Bereiche, z. B. für steile " "Kanten, Ausragungen, usw." -msgid "Remove small overhangs" -msgstr "Kleine Überhänge entfernen" +msgid "Ignore small overhangs" +msgstr "Kleine Überhänge ignorieren" -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs that possibly don't require support." msgstr "" -"Kleine Überhänge entfernen, die möglicherweise keine Stützstrukturen " -"benötigen." +"Kleine Überhänge ignorieren, die möglicherweise keine Stützen benötigen." msgid "Top Z distance" msgstr "Oberer Z-Abstand" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "Der Z-Abstand zwischen der oberen Stütz-Schnittstelle und dem Objekt" msgid "Bottom Z distance" msgstr "Unterer Z-Abstand" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "Der Z-Abstand zwischen der unteren Stütz-Schnittstelle und dem Objekt" msgid "Support/raft base" @@ -13501,7 +16963,7 @@ msgstr "Stütz-/Basis-Objekt" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filament zum Drucken von Stützbasen und Flöße. \"Standard\" bedeutet, dass " "kein spezielles Filament für die Stützen verwendet wird, sondern das " @@ -13536,7 +16998,7 @@ msgstr "Stütz-/Raft-Schnittstelle" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament zum Drucken von Stütz-Schnittstellen. \"Standard\" bedeutet, dass " "kein spezielles Filament für die Stütz-Schnittstellen vorhanden ist und das " @@ -13545,13 +17007,13 @@ msgstr "" msgid "Top interface layers" msgstr "Obere Schnittstellenschichten" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Anzahl der oberen Schnittstellenschichten" msgid "Bottom interface layers" msgstr "Untere Schnittstellenschichten" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Anzahl der unteren Schnittstellenschichten" msgid "Same as top" @@ -13560,24 +17022,30 @@ msgstr "Gleich wie oben" msgid "Top interface spacing" msgstr "Oberer Schnittstellenabstand" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Abstand der Schnittstellenlinien. Null bedeutet feste Schnittstelle" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" +"Abstand der oberen Schnittstellenlinien. Null bedeutet eine solide " +"Schnittstelle.\n" +"Erzwingt die Verwendung einer soliden Schnittstelle, wenn das " +"Stützstrukturen -Eisen aktiviert ist." msgid "Bottom interface spacing" msgstr "Abstand der unteren Schnittstelle" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Abstand der unteren Trennschichtlinien der Stützstrukturen. Null bedeutet " "eine solide Schnittstelle." -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Geschwindigkeit der Stützstruktur-Schnittstellen." msgid "Base pattern" msgstr "Basismuster" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Linienmuster der Stützstrukturen" msgid "Rectilinear grid" @@ -13592,7 +17060,7 @@ msgstr "Schnittstellenmuster" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Linienmuster der Stützstruktur-Schnittstelle. Das Standardmuster für nicht " "lösliche Schnittstellen ist Geradlinig, während das Standardmuster für " @@ -13604,18 +17072,18 @@ msgstr "Rechteckiges Wechselmuster" msgid "Base pattern spacing" msgstr "Abstand des Grundmusters" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Abstände zwischen den Stützlinien" msgid "Normal Support expansion" msgstr "Normale Stützerweiterung" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" "Vergrößern (+) oder Verkleinern (-) der horizontalen Spannweite der normalen " "Stützen" -msgid "Speed of support" +msgid "Speed of support." msgstr "Druckgeschwindigkeit für Stützstrukturen." msgid "" @@ -13636,9 +17104,15 @@ msgstr "" "während der Hybridstil eine ähnliche Struktur wie normale Stützstrukturen " "unter großen flachen Überhängen erzeugt." +msgid "Default (Grid/Organic)" +msgstr "Standard (Gitter/Organisch)" + msgid "Snug" msgstr "Nahtlos" +msgid "Organic" +msgstr "Organisch" + msgid "Tree Slim" msgstr "Baum schlank" @@ -13648,15 +17122,12 @@ msgstr "Baum stark" msgid "Tree Hybrid" msgstr "Baum-Hybrid" -msgid "Organic" -msgstr "Organisch" - msgid "Independent support layer height" msgstr "Unabhängige Stützstruktur-Schichthöhe" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Die Stützschicht verwendet eine unabhängige Schichthöhe im Vergleich zur " @@ -13674,12 +17145,24 @@ msgstr "" "Für Überhänge, deren Neigungswinkel unter diesem Wert liegt, werden Stützen " "generiert." +msgid "Threshold overlap" +msgstr "Schwellwertüberlappung" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Wenn der Schwellenwinkel null ist, werden Stützen für Überhänge generiert, " +"deren Überlappung unter dem Schwellenwert liegt. Je kleiner dieser Wert ist, " +"desto steiler kann der Überhang gedruckt werden, ohne Stützen zu benötigen." + msgid "Tree support branch angle" msgstr "Baumstütze Astwinkel" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Diese Einstellung legt den maximalen Überhangwinkel fest, den die Äste der " @@ -13726,22 +17209,12 @@ msgstr "" "Stützschnittstellen zu aktivieren, wenn dichte Schnittstellen benötigt " "werden." -msgid "Adaptive layer height" -msgstr "Adaptive Schichthöhe" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Wenn Sie diese Option aktivieren, wird die Höhe der Baumstützschicht außer " -"der ersten automatisch berechnet." - msgid "Auto brim width" msgstr "Automatische Randbreite" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Das Aktivieren dieser Option bedeutet, dass die Breite des Brims für " "Baumstützstrukturen automatisch durch die 3D-Drucksoftware berechnet wird." @@ -13749,7 +17222,7 @@ msgstr "" msgid "Tree support brim width" msgstr "Baumsupport mit Füllung" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "Abstand vom Modell zur äußersten Randlinie" msgid "Tip Diameter" @@ -13781,67 +17254,125 @@ msgstr "" "gleichmäßige Dicke haben. Ein kleiner Winkel kann die Stabilität der " "organischen Stütze erhöhen." -msgid "Branch Diameter with double walls" -msgstr "Doppelte Wände für Ast-Durchmesser ab" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Äste mit einer Fläche, die größer ist als die Fläche eines Kreises mit " -"diesem Durchmesser, werden mit doppelten Wänden für die Stabilität gedruckt. " -"Setzen Sie diesen Wert auf Null, um keine doppelten Wände zu erhalten." - msgid "Support wall loops" msgstr "Wände um Stützstrukturen" -msgid "This setting specify the count of walls around support" -msgstr "Diese Einstellung gibt die Anzahl der Wände um die Stützstrukturen an" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Diese Einstellung gibt die Anzahl der Wände um die Stützstrukturen im " +"Bereich von [0,2] an. 0 bedeutet automatisch." msgid "Tree support with infill" msgstr "Baumsupport mit Füllung" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "Diese Einstellung gibt die Anzahl der Wände um den Baumsupport an" +msgid "Ironing Support Interface" +msgstr "Glättung der Stützstruktur-Schnittstelle" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"Glättung verwendet eine kleine Flussmenge, um auf derselben Höhe der " +"Stützstruktur-Schnittstelle erneut zu drucken, um sie glatter zu machen. " +"Diese Einstellung steuert, ob die Stützstruktur-Schnittstelle geglättet " +"wird. Wenn aktiviert, wird die Stützstruktur-Schnittstelle ebenfalls als " +"massiv extrudiert." + +msgid "Support Ironing Pattern" +msgstr "Stützstruktur-Glättungsmuster" + +msgid "Support Ironing flow" +msgstr "Stützstruktur-Glättungsfluss" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"Die Menge an Material, die während des Glättens extrudiert wird. Relativ zum " +"Fluss der normalen Stützstruktur-Schichthöhe. Ein zu hoher Wert führt zu " +"Überextrusion auf der Oberfläche." + +msgid "Support Ironing line spacing" +msgstr "Stützstruktur-Glättungslinienabstand" + msgid "Activate temperature control" msgstr "aktiviere Temperaturkontrolle" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Diese Option aktivieren, um die Temperatur der Druckkammer zu steuern. Ein " -"M191-Befehl wird vor \"machine_start_gcode\" hinzugefügt\n" -"G-Code-Befehle: M141/M191 S(0-255)" +"Diese Option aktiviert die automatische Druckraumtemperaturkontrolle. Diese " +"Option aktiviert das Aussenden eines M191-Befehls vor dem " +"\"machine_start_gcode\", der die Druckraumtemperatur einstellt und wartet, " +"bis sie erreicht ist. Darüber hinaus wird am Ende des Drucks ein M141-Befehl " +"ausgegeben, um den Druckraumheizer auszuschalten, falls vorhanden.\n" +"\n" +"Diese Option basiert auf der Firmware, die die M191- und M141-Befehle " +"entweder über Makros oder nativ unterstützt und wird normalerweise " +"verwendet, wenn ein aktiver Druckraumheizer installiert ist." msgid "Chamber temperature" msgstr "Druckraum Temperatur" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Eine höhere Druckraumtemperatur kann das Verziehen unterdrücken oder " -"reduzieren und möglicherweise zu einer höheren " -"Zwischenschichtbindungsfestigkeit für Hochtemperaturmaterialien wie ABS, " -"ASA, PC, PA und so weiter führen. Gleichzeitig wird die Luftfiltration von " -"ABS und ASA schlechter. Für PLA, PETG, TPU, PVA und andere Materialien mit " -"niedriger Temperatur sollte die tatsächliche Druckraumtemperatur nicht hoch " -"sein, um Verstopfungen zu vermeiden, daher wird 0, was für das Ausschalten " -"steht, dringend empfohlen." +"Für Hochtemperaturmaterialien wie ABS, ASA, PC und PA kann eine höhere " +"Druckraumtemperatur helfen, das Verziehen zu unterdrücken oder zu reduzieren " +"und möglicherweise zu einer höheren Festigkeit der Zwischenschichtbindung " +"führen. Gleichzeitig verringert eine höhere Druckraumtemperatur jedoch die " +"Effizienz der Luftfiltration für ABS und ASA.\n" +"\n" +"Für PLA, PETG, TPU, PVA und andere Niedrigtemperaturmaterialien sollte diese " +"Option deaktiviert sein (auf 0 gesetzt werden), da die Druckraumtemperatur " +"niedrig sein sollte, um ein Verstopfen des Extruders durch Erweichung des " +"Materials am Heizblock zu vermeiden.\n" +"\n" +"Wenn diese Option aktiviert ist, wird auch eine G-Code-Variable namens " +"chamber_temperature gesetzt, die verwendet werden kann, um die gewünschte " +"Druckraumtemperatur an Ihr Druckstart-Makro oder ein Wärmespeicher-Makro " +"weiterzugeben, wie z.B. PRINT_START (andere Variablen) " +"CHAMBER_TEMP=[chamber_temperature]. Dies kann nützlich sein, wenn Ihr " +"Drucker die Befehle M141/M191 nicht unterstützt oder wenn Sie das " +"Wärmespeichern im Druckstart-Makro behandeln möchten, wenn kein aktiver " +"Druckraumheizer installiert ist." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Düsentemperatur nach der ersten Schicht" msgid "Detect thin wall" @@ -13849,21 +17380,21 @@ msgstr "Dünne Wand erkennen" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Erkennt dünne Wände, die keine zwei Linienbreiten enthalten können. Und " "verwendet eine einzelne Linie zum Drucken. Diese wird vielleicht nicht sehr " "gut gedruckt, weil es keine geschlossene Schleife ist." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Dieser G-Code wird beim Filamentwechsel eingefügt, einschließlich des T-" -"Befehls zum Auslösen des Werkzeugwechsels" +"Befehls zum Auslösen des Werkzeugwechsels." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Dieser G-Code wird beim Wechsel der Extrusionsart eingefügt" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Dieser G-Code wird beim Wechsel der Extrusionsart eingefügt." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " @@ -13872,7 +17403,7 @@ msgstr "" "Linienbreite für obere Oberflächen. Wenn als Prozentsatz angegeben, wird sie " "in Bezug auf den Düsendurchmesser berechnet." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Geschwindigkeit der massiven Füllung der Oberseite." msgid "Top shell layers" @@ -13881,7 +17412,7 @@ msgstr "Obere Schalenschichten" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Dies ist die Anzahl der massiven Schichten der oberen Schale, einschließlich " "der Oberflächenschicht. Wenn die mit diesem Wert berechnete Dicke dünner ist " @@ -13898,8 +17429,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Die Anzahl der oberen festen Schichten wird beim Slicen erhöht, wenn die " "obere Schalenstärke dünner als dieser Wert ist. Dies kann verhindern, dass " @@ -13907,15 +17438,47 @@ msgstr "" "bedeutet, dass diese Einstellung deaktiviert ist und die Dicke der oberen " "Schale absolut durch die oberen Schalenschichten bestimmt wird." -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "Dichte der oberen Oberfläche" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Dichte der oberen Oberflächenschicht. Ein Wert von 100 % erzeugt eine " +"vollständig massive, glatte obere Schicht. Eine Reduzierung dieses Wertes " +"führt zu einer strukturierten oberen Oberfläche, abhängig vom gewählten " +"Oberflächenmuster. Ein Wert von 0 % führt dazu, dass nur die Wände der " +"oberen Schicht erstellt werden. Diese Einstellung dient ästhetischen oder " +"funktionalen Zwecken und nicht zur Behebung von Problemen wie Überextrusion." + +msgid "Bottom surface density" +msgstr "Dichte der unteren Oberfläche" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Dichte der unteren Oberflächenschicht. Diese Einstellung dient ästhetischen " +"oder funktionalen Zwecken und nicht zur Behebung von Problemen wie " +"Überextrusion.\n" +"ACHTUNG: Eine Verringerung dieses Wertes kann die Haftung am Druckbett " +"negativ beeinflussen." + +msgid "Speed of travel which is faster and without extrusion." msgstr "Eilgeschwindigkeit, wenn nicht extrudiert wird." msgid "Wipe while retracting" msgstr "Während des Rückzugs wischen" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Bewegen Sie die Düse beim Zurückziehen entlang des letzten Extrusionsweges, " "um ausgetretenes Material an der Düse zu reinigen. Dies kann die Bildung von " @@ -13925,23 +17488,22 @@ msgid "Wipe Distance" msgstr "Wischabstand" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" "Beschreibt, wie lange die Düse entlang des letzten Pfades bewegt wird, wenn " -"zurückgezogen wird. \n" +"zurückgezogen wird.\n" "\n" "Je nachdem, wie lange die Wischoperation dauert, wie schnell und wie lange " "die Einstellungen für den Extruder-/Filamentrückzug sind, kann ein " "Rückzugsbefehl erforderlich sein, um das verbleibende Filament " -"zurückzuziehen. \n" +"zurückzuziehen.\n" "\n" "Wenn ein Wert in der Einstellung \"Rückzugsmenge vor dem Wischen\" unten " "angegeben ist, wird ein überschüssiger Rückzug vor dem Wischen ausgeführt, " @@ -13956,6 +17518,13 @@ msgstr "" "entfernen und den Kammerdruck im Inneren der Düse zu stabilisieren, um " "Erscheinungsdefekte beim Drucken von Objekten zu vermeiden." +msgid "Internal ribs" +msgstr "Interne Rippen" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" +"Interne Rippen aktivieren, um die Stabilität des Reinigungsturms zu erhöhen." + msgid "Purging volumes" msgstr "Reinigungsvolumen" @@ -13976,15 +17545,22 @@ msgstr "Reinigungsvolumen" msgid "The volume of material to prime extruder on tower." msgstr "Das Volumen des Materials, das der Extruder am Turm entladen soll." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Breite des Reinigungsturms." msgid "Wipe tower rotation angle" msgstr "Winkel der Reinigungsturmrotation" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Winkel der Reinigungsturmrotation in Bezug auf die X-Achse." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" +"Randbreite des Reinigungsturms, negative Zahl bedeutet automatisch " +"berechnete Breite basierend auf der Höhe des Reinigungsturms." + msgid "Stabilization cone apex angle" msgstr "Winkel des Stabilisierungskegels" @@ -13995,12 +17571,6 @@ msgstr "" "Winkel an der Spitze des Kegels, der zum Stabilisieren des Reinigungsturms " "verwendet wird. Ein größerer Winkel bedeutet eine breitere Basis." -msgid "Wipe tower purge lines spacing" -msgstr "Wischabstand der Reinigungsturmpurges" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Abstand der Reinigungsturmpurges." - msgid "Maximum wipe tower print speed" msgstr "Maximale Druckgeschwindigkeit des Reinigungsturms" @@ -14018,7 +17588,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -14048,8 +17618,46 @@ msgstr "" "Für die äußeren Umfänge des Reinigungsturms wird die Geschwindigkeit des " "inneren Umfangs unabhängig von dieser Einstellung verwendet." -msgid "Wipe tower extruder" -msgstr "Reinigungsturm-Extruder" +msgid "Wall type" +msgstr "Wandtyp" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Wandtyp des Reinigungsturms.\n" +"1. Rechteck: Der Standard-Wandtyp, ein Rechteck mit fester Breite und Höhe.\n" +"2. Kegel: Ein Kegel mit einer Fase am Boden, um den Reinigungsturm zu " +"stabilisieren.\n" +"3. Rippe: Fügt der Turmwand vier Rippen für verbesserte Stabilität hinzu." + +msgid "Extra rib length" +msgstr "Extralänge der Rippe" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Positive Werte können die Größe der Rippenwand erhöhen, während negative " +"Werte die Größe verringern können. Die Größe der Rippenwand kann jedoch " +"nicht kleiner sein als die, die durch das Reinigungsvolumen bestimmt wird." + +msgid "Rib width" +msgstr "Rippenbreite" + +msgid "Rib width." +msgstr "Rippenweite" + +msgid "Fillet wall" +msgstr "Gefüllte Wand" + +msgid "The wall of prime tower will fillet." +msgstr "Die Wand des Reinigungsturms wird abgerundet." msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -14072,6 +17680,19 @@ msgstr "" "werden verwendet, um die Erstellung der vollständigen Reinigungsvolumina " "unten zu vereinfachen." +msgid "Skip points" +msgstr "Punkte überspringen" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" +"Die Wand des Reinigungsturms überspringt die Startpunkte des Wischpfads." + +msgid "Infill gap" +msgstr "Infill-Lücke" + +msgid "Infill gap." +msgstr "Infill-Lücke." + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -14096,8 +17717,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Dieses Objekt wird verwendet, um die Düse nach einem Filamentwechsel zu " "reinigen, Filament zu sparen und die Druckzeit zu verkürzen. Die Farben der " @@ -14110,13 +17731,45 @@ msgstr "Maximale Brückenlänge" msgid "Maximal distance between supports on sparse infill sections." msgstr "Maximaler Abstand zwischen Stützstrukturen auf dünnem Infill." +msgid "Wipe tower purge lines spacing" +msgstr "Wischabstand der Reinigungsturmpurges" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Abstand der Reinigungsturmpurges." + +msgid "Extra flow for purging" +msgstr "Zusätzlicher Fluss für Reinigung" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Zusätzlicher Fluss, der für die Reinigungslinien auf dem Reinigungsturm " +"verwendet wird. Dadurch werden die Reinigungslinien dicker oder schmaler, " +"als sie normalerweise wären. Der Abstand wird automatisch angepasst." + +msgid "Idle temperature" +msgstr "Leerlauftemperatur" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Düsentemperatur, wenn das Werkzeug in Mehrwerkzeug-Setups derzeit nicht " +"verwendet wird. Dies wird nur verwendet, wenn die „Ausflussverhinderung“ in " +"den Druckeinstellungen aktiviert ist. Auf 0 setzen, um zu deaktivieren." + msgid "X-Y hole compensation" msgstr "X-Y-Loch-Kompensation" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Die Löcher des Objekts werden in der XY-Ebene um den eingestellten Wert " "vergrößert oder verkleinert. Ein positiver Wert macht die Löcher größer, ein " @@ -14126,11 +17779,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "X-Y-Konturkompensation" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Die Kontur von Objekten wird in der XY-Ebene um den eingestellten Wert " "vergrößert oder verkleinert. Positive Werte vergrößern Konturen, negative " @@ -14159,7 +17813,7 @@ msgstr "ab Wert erkenne Polyhole" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -14190,7 +17844,7 @@ msgstr "Format der G-Code-Vorschaubilder" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Format der G-Code-Vorschaubilder: PNG für beste Qualität, JPG für kleinste " "Größe, QOI für Firmware mit geringem Speicherbedarf" @@ -14199,10 +17853,10 @@ msgid "Use relative E distances" msgstr "Relative Extrusion" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "Relative Extrusion wird empfohlen, wenn die Option \"label_objects\" " "verwendet wird. Einige Extruder arbeiten besser mit dieser Option " @@ -14213,15 +17867,12 @@ msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Der klassische Wandgenerator erzeugt Wände mit konstanter Extrusionsbreite, " "wobei für sehr dünne Bereiche die Lückenfüllung verwendet wird. Die Arachne-" "Engine erzeugt Wände mit variabler Extrusionsbreite." -msgid "Classic" -msgstr "Klassisch" - msgid "Arachne" msgstr "Arachne" @@ -14231,7 +17882,7 @@ msgstr "Länge des Wandübergangs" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Beim Übergang zwischen verschiedenen Wandstärken, wenn das Teil dünner wird, " "wird eine bestimmte Menge an Platz zum Trennen oder Verbinden der " @@ -14248,7 +17899,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Verhindern Sie das Hin- und Herwechseln zwischen einer zusätzlichen Wand und " "einer weniger. Diese Spanne erweitert den Bereich der Extrusionsbreiten auf " @@ -14267,7 +17918,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Wenn Übergänge zwischen einer geraden und einer ungeraden Anzahl von Wänden " "erstellt werden sollen. Eine Keilform mit einem größeren Winkel als dieser " @@ -14281,7 +17932,7 @@ msgstr "Anzahl der Wände" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Die Anzahl der Wände, von der Mitte aus gezählt, über die die Veränderung " "verteilt werden muss. Niedrigere Werte bedeuten, dass sich die Außenwände " @@ -14292,14 +17943,14 @@ msgstr "Minimale Merkmalgröße" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Mindestdicke für dünne Features. Modellfeatures, die dünner als dieser Wert " -"sind, werden nicht gedruckt, während Features, die dicker als die " -"Mindestfeaturegröße sind, auf die Mindestwandbreite verbreitert werden. " -"Bezogen als Prozentsatz auf Düsendurchmesser." +"Minimale Dicke von dünnen Merkmalen. Merkmale des Modells, die dünner als " +"dieser Wert sind, werden nicht gedruckt, während Merkmale, die dicker als " +"dieser Wert sind, auf die minimale Wandbreite verbreitert werden. Wird als " +"Prozentsatz des Düsendurchmessers ausgedrückt." msgid "Minimum wall length" msgstr "Minimale Wandlänge" @@ -14309,9 +17960,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Passen Sie diesen Wert an, um zu verhindern, dass kurze, offene Wände " @@ -14345,7 +17996,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Breite der Wand, die dünne Features (entsprechend der Mindest-Featuregröße) " "des Modells ersetzen wird. Wenn die minimale Wandbreite dünner ist als die " @@ -14356,9 +18007,9 @@ msgid "Detect narrow internal solid infill" msgstr "Erkennen einer schmalen internen soliden Füllung" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Mit dieser Option wird ein schmaler innerer Füllbereich automatisch erkannt. " "Wenn diese Option aktiviert ist, wird ein konzentrisches Muster für den " @@ -14377,29 +18028,154 @@ msgstr "Zu große Linienbreite" msgid " not in range " msgstr "nicht im Bereich" +msgid "Export 3MF" +msgstr "3mf exportieren" + +msgid "Export project as 3MF." +msgstr "Projekt als 3MF exportieren." + +msgid "Export slicing data" +msgstr "Slicing-Daten exportieren" + +msgid "Export slicing data to a folder." +msgstr "Exportieren von Slicing-Daten in einen Ordner" + +msgid "Load slicing data" +msgstr "Slicing-Daten laden" + +msgid "Load cached slicing data from directory." +msgstr "Zwischengespeicherte Slicing-Daten aus dem Verzeichnis laden" + +msgid "Export STL" +msgstr "Exportiere STL" + +msgid "Export the objects as single STL." +msgstr "Exportieren Sie die Objekte als einzelne STL." + +msgid "Export multiple STLs" +msgstr "Mehrere STLs exportieren" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Exportieren Sie die Objekte als mehrere STLs in ein Verzeichnis" + +msgid "Slice" +msgstr "Slice" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "" +"Slicen sie die Druckplatten: 0-alle Druckplatten; i-Druckplatte i; andere " +"ungültig" + +msgid "Show command help." +msgstr "Befehlshilfe anzeigen." + +msgid "UpToDate" +msgstr "Auf dem neuesten Stand" + +msgid "Update the config values of 3MF to latest." +msgstr "Aktualisierung der 3MF Konfigurationswerte auf die neueste Version." + +msgid "downward machines check" +msgstr "abwärts Kompatibilitätsprüfung" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"Überprüfen, ob die aktuelle Maschine abwärtskompatibel mit den Maschinen in " +"der Liste ist" + +msgid "Load default filaments" +msgstr "Standard-Filamente laden" + +msgid "Load first filament as default for those not loaded." +msgstr "Das erste Filament als Standard für nicht geladene übernehmen" + msgid "Minimum save" msgstr "Minimale Speicherung" -msgid "export 3mf with minimum size." -msgstr "Exportieren Sie 3mf mit minimaler Größe." +msgid "Export 3MF with minimum size." +msgstr "Exportieren Sie 3MF mit minimaler Größe." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "Maximale Anzahl von Dreiecken pro Bauplattform für das Slicing." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "Das maximale Slicing-Zeitlimit pro Plate in Sekunden." msgid "No check" msgstr "Keine Überprüfung" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Führe keine Gültigkeitsprüfungen durch, wie beispielsweise die Überprüfung " "von G-Code-Pfadkonflikten." +msgid "Normative check" +msgstr "Normative Überprüfung" + +msgid "Check the normative items." +msgstr "Überprüfen Sie die normativen Elemente." + +msgid "Output Model Info" +msgstr "Ausgabe Modellinformationen" + +msgid "Output the model's information." +msgstr "Geben Sie die Informationen des Modells aus." + +msgid "Export Settings" +msgstr "Einstellungen exportieren" + +msgid "Export settings to a file." +msgstr "Einstellungen in eine Datei exportieren." + +msgid "Send progress to pipe" +msgstr "Fortschritt an die Leitung senden" + +msgid "Send progress to pipe." +msgstr "Fortschritt an die Leitung senden" + +msgid "Arrange Options" +msgstr "Anordnungsoptionen" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Anordnungsoptionen: 0-deaktiviert; 1-aktiviert; andere-automatisch" + +msgid "Repetition count" +msgstr "Anzahl der Wiederholungen" + +msgid "Repetition count of the whole model." +msgstr "Anzahl der Wiederholungen des gesamten Modells" + msgid "Ensure on bed" msgstr "Auf dem Bett stellen" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Heben Sie das Objekt über das Bett, wenn es teilweise darunter liegt. " "Standardmäßig deaktiviert" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Die zur Verfügung stehenden Modelle in einer Platte anordnen und zu einem " +"einzigen Modell zusammenführen, um Aktionen zusammen durchführen zu können." + +msgid "Convert Unit" +msgstr "Einheit umrechnen" + +msgid "Convert the units of model." +msgstr "Einheiten des Modells umrechnen" + msgid "Orient Options" msgstr "Orientierungsoptionen" @@ -14409,12 +18185,89 @@ msgstr "Orientierungsoptionen: 0-deaktiviert; 1-aktiviert; andere-automatisch" msgid "Rotation angle around the Z axis in degrees." msgstr "Rotationswinkel um die Z-Achse in Grad." +msgid "Rotate around X" +msgstr "Rotieren um X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Rotationswinkel um die X-Achse in Grad." + msgid "Rotate around Y" msgstr "Rotieren um Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Rotationswinkel um die Y-Achse in Grad." +msgid "Scale the model by a float factor." +msgstr "Skalierung des Modells um einen Faktor" + +msgid "Load General Settings" +msgstr "Allgemeine Einstellungen laden" + +msgid "Load process/machine settings from the specified file." +msgstr "Laden von Prozess-/Maschineneinstellungen aus der angegebenen Datei" + +msgid "Load Filament Settings" +msgstr "Filamenteinstellungen laden" + +msgid "Load filament settings from the specified file list." +msgstr "Filamenteinstellungen aus der angegebenen Dateiliste laden" + +msgid "Skip Objects" +msgstr "Objekte überspringen" + +msgid "Skip some objects in this print." +msgstr "Einige Objekte in diesem Druck überspringen" + +msgid "Clone Objects" +msgstr "Objekte klonen" + +msgid "Clone objects in the load list." +msgstr "Objekte in der Ladeliste klonen" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" +"Lade aktuelle Prozess-/Maschineneinstellungen, wenn Aktuell verwendet wird" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Aktuelle Prozess-/Maschineneinstellungen aus der angegebenen Datei laden, " +"wenn Aktuell verwendet wird" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "Lade aktuelle Filamenteinstellungen, wenn Aktuell verwendet wird" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Aktuelle Filamenteinstellungen aus der angegebenen Datei laden, wenn Aktuell " +"verwendet wird" + +msgid "Downward machines check" +msgstr "Abwärtz Kompatibilitätsprüfung" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Wenn aktiviert, wird überprüft, ob die aktuelle Maschine abwärtskompatibel " +"mit den Maschinen in der Liste ist" + +msgid "downward machines settings" +msgstr "Abwärtskompatible Maschineneinstellungen" + +msgid "The machine settings list needs to do downward checking." +msgstr "Die Liste der Maschineneinstellungen muss abwärts überprüft werden" + +msgid "Load assemble list" +msgstr "Lade die Liste der zusammenzufügenden Objekte" + +msgid "Load assemble object list from config file." +msgstr "" +"Laden Sie die Liste der zusammenzufügenden Objekte aus der " +"Konfigurationsdatei" + msgid "Data directory" msgstr "Datenverzeichnis" @@ -14427,22 +18280,113 @@ msgstr "" "nützlich, um verschiedene Profile beizubehalten oder Konfigurationen aus " "einem Netzwerkspeicher einzubeziehen." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Ausgabeverzeichnis" + +msgid "Output directory for the exported files." +msgstr "Ausgabeverzeichnis für die exportierten Dateien." + +msgid "Debug level" +msgstr "Fehlersuchstufe" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:warning, " +"3:info, 4:debug, 5:trace\n" + +msgid "Enable timelapse for print" +msgstr "Zeitraffer für Druck aktivieren" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Wenn aktiviert, wird dieses Slicing als Zeitraffer betrachtet" + +msgid "Load custom G-code" msgstr "Lade benutzerdefinierten G-Code" -msgid "Load custom gcode from json" -msgstr "Lade benutzerdefinierten G-Code aus json" +msgid "Load custom G-code from json." +msgstr "Lade benutzerdefinierten G-Code aus json." -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "Lade Filament-IDs" + +msgid "Load filament IDs for each object." +msgstr "Lade Filament-IDs für jedes Objekt." + +msgid "Allow multiple colors on one plate" +msgstr "Erlaube mehrere Farben auf einer Platte" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Wenn aktiviert, wird die Anordnung mehrere Farben auf einer Platte zulassen" + +msgid "Allow rotation when arranging" +msgstr "Erlaube Drehungen beim Anordnen" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Wenn aktiviert, wird die Anordnung Drehungen zulassen, wenn Objekte " +"platziert werden" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Vermeiden Sie den Extrusionskalibrierungsbereich beim Anordnen" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Wenn aktiviert, wird die Anordnung den Extrusionskalibrierungsbereich beim " +"Platzieren von Objekten vermeiden." + +msgid "Skip modified G-code in 3MF" +msgstr "Überspringe geänderte G-Codes in 3mf" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Überspringe die geänderten G-Codes in der 3MF für Drucker- oder " +"Filamentvorgaben." + +msgid "MakerLab name" +msgstr "MakerLab-Name" + +msgid "MakerLab name to generate this 3MF." +msgstr "MakerLab-Name zum Generieren dieses 3MF." + +msgid "MakerLab version" +msgstr "MakerLab-Version" + +msgid "MakerLab version to generate this 3MF." +msgstr "MakerLab-Version zum Generieren dieses 3MF." + +msgid "Metadata name list" +msgstr "Metadatennamenliste" + +msgid "Metadata name list added into 3MF." +msgstr "Metadatennamenliste, wird in die 3MF hinzugefügt." + +msgid "Metadata value list" +msgstr "Metadatenwertliste" + +msgid "Metadata value list added into 3MF." +msgstr "Metadatenwertliste, wird in die 3MF hinzugefügt." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Erlauben Sie das Slicen von 3MF mit neuerer Version" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Erlauben Sie das Slicen von 3MF mit neuerer Version." + +msgid "Current Z-hop" msgstr "Aktuelles Z-Hop" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Enthält den Z-Hop am Anfang des benutzerdefinierten G-Codes." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Position des Extruders am Anfang des benutzerdefinierten G-Codes. Wenn der " "benutzerdefinierte G-Code irgendwohin reist, sollte er in diese Variable " @@ -14452,19 +18396,29 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Rückzugszustand am Anfang des benutzerdefinierten G-Codes. Wenn der " "benutzerdefinierte G-Code die Extruderachse bewegt, sollte er in diese " "Variable schreiben, damit PrusaSlicer den Rückzug korrekt durchführt, wenn " "er die Kontrolle wiedererlangt." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Zusätzlicher Rückzug" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "Derzeit geplantes zusätzliches Extruder-Priming nach dem Rückzug." +msgid "Absolute E position" +msgstr "Absolute E-Position" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Aktuelle Position der Extruderachse. Wird nur bei absoluter " +"Extruderadressierung verwendet." + msgid "Current extruder" msgstr "Aktueller Extruder" @@ -14510,11 +18464,20 @@ msgstr "" msgid "Is extruder used?" msgstr "Wird der Extruder verwendet?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Vektor von Booleschen Werten, die angeben, ob ein bestimmter Extruder im " "Druck verwendet wird." +msgid "Has single extruder MM priming" +msgstr "Hat einzelnes Extruder-MM-Priming" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Werden die zusätzlichen Multi-Material-Priming-Regionen in diesem Druck " +"verwendet?" + msgid "Volume per extruder" msgstr "Volumen pro Extruder" @@ -14523,10 +18486,10 @@ msgstr "" "Gesamtes Filamentvolumen, das pro Extruder während des gesamten Drucks " "extrudiert wird." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Gesamte Anzahl der Werkzeugwechsel" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Anzahl der Werkzeugwechsel während des Drucks." msgid "Total volume" @@ -14580,12 +18543,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Enthält eine Zeichenfolge mit Informationen darüber, welche Skalierung auf " "die einzelnen Objekte angewendet wurde. Die Indizierung der Objekte ist " "nullbasiert (das erste Objekt hat den Index 0).\n" -"Beispiel: 'x:100% y:50% z:100'." +"Beispiel: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Eingabedateiname ohne Erweiterung" @@ -14593,13 +18556,15 @@ msgstr "Eingabedateiname ohne Erweiterung" msgid "Source filename of the first object, without extension." msgstr "Quelldateiname des ersten Objekts, ohne Erweiterung." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "Der Vektor hat zwei Elemente: x- und y-Koordinate des Punktes. Werte in mm." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "Der Vektor hat zwei Elemente: x- und y-Dimension der Begrenzungsbox. Werte " @@ -14648,27 +18613,30 @@ msgstr "Stunde" msgid "Minute" msgstr "Minute" +msgid "Second" +msgstr "Sekunde" + msgid "Print preset name" -msgstr "Name des Druckvorgaben" +msgstr "Name der Druckvoreinstellungen" msgid "Name of the print preset used for slicing." -msgstr "Name der Druckvorgabe, die zum Slicen verwendet wird." +msgstr "Name der Druckvoreinstellung, die zum Slicen verwendet wird." msgid "Filament preset name" -msgstr "Name des Filamentvorgaben" +msgstr "Name der Filamentvoreinstellungen" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Name der Filamentvorgabe, die zum Slicen verwendet wird. Die Variable ist " -"ein Vektor, der einen Namen für jeden Extruder enthält." +"Name der Filamentvoreinstellung, die zum Slicen verwendet wird. Die Variable " +"ist ein Vektor, der einen Namen für jeden Extruder enthält." msgid "Printer preset name" -msgstr "Name des Druckervorgaben" +msgstr "Name der Druckervoreinstellungen" msgid "Name of the printer preset used for slicing." -msgstr "Name der Druckervorgabe, die zum Slicen verwendet wird." +msgstr "Name der Druckervoreinstellung, die zum Slicen verwendet wird." msgid "Physical printer name" msgstr "Name des physischen Druckers" @@ -14676,6 +18644,16 @@ msgstr "Name des physischen Druckers" msgid "Name of the physical printer used for slicing." msgstr "Name des physischen Druckers, der zum Slicen verwendet wird." +msgid "Number of extruders" +msgstr "Anzahl der Extruder" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Gesamtanzahl der Extruder, unabhängig davon, ob sie im aktuellen Druck " +"verwendet werden." + msgid "Layer number" msgstr "Schichtnummer" @@ -14684,8 +18662,8 @@ msgstr "" "Index der aktuellen Schicht. Einsbasiert (d.h. die erste Schicht ist Nummer " "1)." -msgid "Layer z" -msgstr "Layer z" +msgid "Layer Z" +msgstr "Layer Z" msgid "" "Height of the current layer above the print bed, measured to the top of the " @@ -14694,8 +18672,8 @@ msgstr "" "Höhe der aktuellen Schicht über dem Druckbett, gemessen an der Oberseite der " "Schicht." -msgid "Maximal layer z" -msgstr "Maximale Schichtdicke z" +msgid "Maximal layer Z" +msgstr "Maximale Schichtdicke Z" msgid "Height of the last layer above the print bed." msgstr "Höhe der letzten Schicht über dem Druckbett." @@ -14721,9 +18699,6 @@ msgstr "Füllbewegungen generieren" msgid "Detect overhangs for auto-lift" msgstr "Erkennen der Überhänge für das automatische Anheben" -msgid "Generating support" -msgstr "Generieren von Stützstrukturen" - msgid "Checking support necessity" msgstr "Überprüfung der Notwendigkeit von Stützen" @@ -14744,6 +18719,9 @@ msgstr "" "Es scheint, dass das Objekt %s %s hat. Bitte orientieren Sie das Objektneu " "oder aktivieren Sie die Support-Generierung." +msgid "Generating support" +msgstr "Generieren von Stützstrukturen" + msgid "Optimizing toolpath" msgstr "Optimieren des Werkzeugwegs" @@ -14761,42 +18739,38 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Die XY-Größenkompensation eines Objekts wird nicht verwendet, da es auch " "farblich lackiert wurde.\n" "Die XY-Größenkompensation kann nicht mit Farbmalerei kombiniert werden." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Stützen: Werkzeugpfad auf Ebene %d erzeugen" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Ein Objekt hat die XY-Größenkompensation aktiviert, die nicht verwendet " +"wird, da es auch mit Fuzzy Skin lackiert ist.\n" +"Die XY-Größenkompensation kann nicht mit Fuzzy Skin Lackierung kombiniert " +"werden." -msgid "Support: detect overhangs" -msgstr "Stützen: Überhänge erkennen" +msgid "Object name" +msgstr "Objekt Name" msgid "Support: generate contact points" msgstr "Stützen: Kontaktstellen erstellen" -msgid "Support: propagate branches" -msgstr "Stützen: Zweige vermehren" +msgid "Loading of a model file failed." +msgstr "Das Laden der Modelldatei ist fehlgeschlagen." -msgid "Support: draw polygons" -msgstr "Stützen: Polygone zeichnen" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" +"Das Erstellen eines Netzes aus der Modelldatei ist fehlgeschlagen oder es " +"liegt keine gültige Form vor." -msgid "Support: generate toolpath" -msgstr "Stützen: Werkzeugweg generieren" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Stützen: Polygone auf Ebene %d erzeugen" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Stützen: Löcher in Schicht %d repairieren" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Stützen: Verbreiten von Zweigen auf Ebene %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14804,20 +18778,11 @@ msgstr "" "Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." "amf(.xml) haben." -msgid "Loading of a model file failed." -msgstr "Das Laden der Modelldatei ist fehlgeschlagen." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .3mf oder .zip.amf " "haben." -msgid "Canceled" -msgstr "Abgebrochen" - msgid "load_obj: failed to parse" msgstr "load_obj: konnte nicht analysiert werden" @@ -14908,19 +18873,19 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Geben Sie bitte gültige Werte ein:\n" "Startwert: >= %.1f\n" "Endwert: <= %.1f\n" "Endwert: > Startwert\n" -"Werteschritt: >= %.3f)" +"Werteschritt: >= %.3f" msgid "The name cannot be empty." msgstr "Der Name darf nicht leer sein." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Die ausgewählte Voreinstellung: %s wurde nicht gefunden." msgid "The name cannot be the same as the system preset name." @@ -14928,11 +18893,18 @@ msgstr "" "Der Name darf nicht mit dem Namen der Systemvoreinstellung übereinstimmen." msgid "The name is the same as another existing preset name" -msgstr "" -"Der Name ist der gleiche wie ein anderer vorhandener Voreinstellungsname" +msgstr "Der Name existiert bereits bei einer anderen Voreinstellung" msgid "create new preset failed." -msgstr "erstellen einer neuen Voreinstellung fehlgeschlagen." +msgstr "Erstellen einer neuen Voreinstellung ist fehlgeschlagen." + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "Die ausgewählte Voreinstellung: %s wurde nicht gefunden." + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "Konnte den Parameter: %s nicht finden." msgid "" "Are you sure to cancel the current calibration and return to the home page?" @@ -14956,23 +18928,22 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Dieser Maschinentyp kann nur 16 historische Ergebnisse pro Düse speichern. " "Sie können die vorhandenen historischen Ergebnisse löschen und dann die " "Kalibrierung starten. Oder Sie können die Kalibrierung fortsetzen, aber Sie " -"können keine neuen Kalibrierungshistorien erstellen. \n" +"können keine neuen Kalibrierungshistorien erstellen.\n" "Möchten Sie die Kalibrierung dennoch fortsetzen?" -msgid "Connecting to printer..." -msgstr "Verbindung zum Drucker wird hergestellt..." - -msgid "The failed test result has been dropped." -msgstr "Das fehlgeschlagene Testergebnis wurde verworfen." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Flussdynamik-Kalibrierungsergebnis wurde auf dem Drucker gespeichert" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" +"Nur eines der Ergebnisse mit dem gleichen Namen: %s wird gespeichert. Sind " +"Sie sicher, dass Sie die anderen Ergebnisse überschreiben möchten?" #, c-format, boost-format msgid "" @@ -14984,6 +18955,17 @@ msgstr "" "Namen: %s. Nur eines der Ergebnisse mit dem gleichen Namen wird gespeichert. " "Sind Sie sicher, dass Sie das historische Ergebnis überschreiben möchten?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" +"Sind Sie sicher, dass Sie das historische Ergebnis überschreiben möchten?" +"Innerhalb desselben Extruders muss der Name (%s) eindeutig sein, wenn der " +"Filamenttyp, die Düsendurchmesser und der Düsenfluss gleich sind.\n" +"Sind Sie sicher, dass Sie das historische Ergebnis überschreiben möchten?" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14992,18 +18974,28 @@ msgstr "" "Dieser Maschinentyp kann nur %d historische Ergebnisse pro Düse speichern. " "Dieses Ergebnis wird nicht gespeichert." +msgid "Connecting to printer..." +msgstr "Verbindung zum Drucker wird hergestellt..." + +msgid "The failed test result has been dropped." +msgstr "Das fehlgeschlagene Testergebnis wurde verworfen." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Flussdynamik-Kalibrierungsergebnis wurde auf dem Drucker gespeichert" + msgid "Internal Error" msgstr "Interner Fehler" msgid "Please select at least one filament for calibration" msgstr "Bitte wählen Sie mindestens ein Filament zur Kalibrierung aus" -msgid "Flow rate calibration result has been saved to preset" -msgstr "Flussraten-Kalibrierungsergebnis wurde in Voreinstellung gespeichert" - -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" -"Maximale volumetrische Geschwindigkeitskalibrierungsergebnis wurde in " +"Flussraten-Kalibrierungsergebnis wurde in einer Voreinstellung gespeichert" + +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "" +"Maximale volumetrische Geschwindigkeitskalibrierungsergebnis wurde in einer " "Voreinstellung gespeichert" msgid "When do you need Flow Dynamics Calibration" @@ -15015,19 +19007,19 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" "Wir haben jetzt die automatische Kalibrierung für verschiedene Filamente " -"hinzugefügt, die vollautomatisch ist und das Ergebnis wird in den Drucker " -"für die zukünftige Verwendung gespeichert. Sie müssen die Kalibrierung nur " -"in den folgenden begrenzten Fällen durchführen:\n" -"1. Wenn Sie ein neues Filament von verschiedenen Marken/Modellen einführen " -"oder das Filament feucht ist;\n" -"2. wenn die Düse abgenutzt ist oder durch eine neue ersetzt wird;\n" +"hinzugefügt, die vollständig automatisiert ist und deren Ergebnis im Drucker " +"für die zukünftige Verwendung gespeichert wird. Sie müssen die Kalibrierung " +"nur in den folgenden begrenzten Fällen durchführen:\n" +"1. Wenn Sie ein neues Filament anderer Marken/Modelle einführen oder das " +"Filament feucht ist;\n" +"2. Wenn die Düse abgenutzt oder durch eine neue ersetzt wurde;\n" "3. Wenn die maximale volumetrische Geschwindigkeit oder die Drucktemperatur " -"in der Filament-Einstellung geändert wird." +"im Filamenteinstellungen geändert wird." msgid "About this calibration" msgstr "Über diese Kalibrierung" @@ -15079,12 +19071,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Nach der Verwendung der Flussdynamik-Kalibrierung kann es immer noch zu " "einigen Extrusionsproblemen kommen, wie z.B.:\n" @@ -15191,9 +19183,6 @@ msgstr "" "*Wir empfehlen Ihnen, Marke, Material, Typ und sogar Feuchtigkeitsgehalt in " "den Namen aufzunehmen" -msgid "Failed" -msgstr "Fehlgeschlagen" - msgid "Please enter the name you want to save to printer." msgstr "" "Bitte geben Sie den Namen ein, unter dem Sie ihn auf dem Drucker speichern " @@ -15202,13 +19191,6 @@ msgstr "" msgid "The name cannot exceed 40 characters." msgstr "Der Name darf 40 Zeichen nicht überschreiten." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Es wird nur eines der Ergebnisse mit demselben Namen gespeichert. Sind Sie " -"sicher, dass Sie die anderen Ergebnisse überschreiben möchten?" - msgid "Please find the best line on your plate" msgstr "Bitte finden Sie die beste Linie auf Ihrer Platte" @@ -15221,9 +19203,6 @@ msgstr "Eingabewert" msgid "Save to Filament Preset" msgstr "Speichern in Filament-Voreinstellung" -msgid "Preset" -msgstr "Voreinstellung" - msgid "Record Factor" msgstr "Aufzeichnungsfaktor" @@ -15259,9 +19238,6 @@ msgstr "Überspringen Sie die Kalibrierung2" msgid "flow ratio : %s " msgstr "Flussverhältnis: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Bitte wählen Sie einen Block mit glattester Oberfläche" - msgid "Please choose a block with smoothest top surface." msgstr "Bitte wählen Sie einen Block mit glattester Oberfläche." @@ -15292,22 +19268,39 @@ msgstr "" msgid "Printing Parameters" msgstr "Druckparameter" +msgid "Synchronize nozzle and AMS information" +msgstr "Nozzle- und AMS-Informationen synchronisieren" + +msgid "Please connect the printer first before synchronizing." +msgstr "Bitte verbinden Sie zuerst den Drucker, bevor Sie synchronisieren." + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" +"Die Düseninformationen des Druckers %s wurden nicht festgelegt. Bitte " +"konfigurieren Sie sie, bevor Sie mit der Kalibrierung fortfahren." + +msgid "AMS and nozzle information are synced" +msgstr "AMS- und Düseninformationen sind synchronisiert" + +msgid "Nozzle Info" +msgstr "Düseninfo" + msgid "Plate Type" msgstr "Druckbetttyp" msgid "filament position" msgstr "Filamentposition" -msgid "External Spool" -msgstr "Externe Spule" - msgid "Filament For Calibration" msgstr "Filament zur Kalibrierung" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Tipps für Kalibrierungsmaterial:\n" "- Materialien, die dieselbe Heizbetttemperatur haben können\n" @@ -15315,7 +19308,7 @@ msgstr "" "Matte)" msgid "Pattern" -msgstr "Pattern" +msgstr "Muster" msgid "Method" msgstr "Methode" @@ -15328,9 +19321,28 @@ msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" "TPU wird nicht für die automatische Flussdynamik-Kalibrierung unterstützt." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Es können keine mehreren Filamente mit großen Temperaturunterschieden " +"gemeinsam gedruckt werden. Andernfalls kann der Extruder und die Düse " +"während des Druckvorgangs blockiert oder beschädigt werden." + +msgid "Sync AMS and nozzle information" +msgstr "AMS- und Düseninformationen synchronisieren" + msgid "Connecting to printer" msgstr "Verbindung zum Drucker wird hergestellt" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" +"Die Kalibrierung unterstützt nur Fälle, in denen die Düsendurchmesser links " +"und rechts identisch sind." + msgid "From k Value" msgstr "vom k Wert" @@ -15349,6 +19361,9 @@ msgstr "Vom volumetrischen Speed" msgid "To Volumetric Speed" msgstr "zur volumetrischen Geschwindigkeit" +msgid "Are you sure you want to cancel this print?" +msgstr "Möchten Sie diesen Druck wirklich abbrechen?" + msgid "Flow Dynamics Calibration Result" msgstr "Flussdynamik-Kalibrierungsergebnis" @@ -15375,6 +19390,16 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Ändern der Flussdynamik-Kalibrierung" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" +"Innerhalb desselben Extruders muss der Name '%s' eindeutig sein, wenn der " +"Filamenttyp, die Düsendurchmesser und der Düsenfluss identisch sind. Bitte " +"wählen Sie einen anderen Namen." + msgid "New Flow Dynamic Calibration" msgstr "Neue Flussdynamik-Kalibrierung" @@ -15384,6 +19409,12 @@ msgstr "Ok" msgid "The filament must be selected." msgstr "Das Filament muss ausgewählt werden." +msgid "The extruder must be selected." +msgstr "Der Extruder muss ausgewählt werden." + +msgid "The nozzle must be selected." +msgstr "Die Düse muss ausgewählt werden." + msgid "Network lookup" msgstr "Netzwerk durchsuchen" @@ -15419,15 +19450,12 @@ msgstr "" msgid "PA Calibration" msgstr "PA Kalibrierung" -msgid "DDE" -msgstr "DDE" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Extruder Typ" +msgid "DDE" +msgstr "DDE" + msgid "PA Tower" msgstr "PA Turm" @@ -15446,14 +19474,32 @@ msgstr "Ende PA:" msgid "PA step: " msgstr "PA Schritte:" +msgid "Accelerations: " +msgstr "Beschleunigungen:" + +msgid "Speeds: " +msgstr "Geschwindigkeiten:" + msgid "Print numbers" msgstr "Anzahl der Drucke" +msgid "Comma-separated list of printing accelerations" +msgstr "Kommagetrennte Liste von Druckbeschleunigungen" + +msgid "Comma-separated list of printing speeds" +msgstr "Kommagetrennte Liste von Druckgeschwindigkeiten" + +msgid "Pressure Advance Guide" +msgstr "Pressure Advance Anleitung" + +msgid "Adaptive Pressure Advance Guide" +msgstr "Adaptive Pressure Advance Anleitung" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Bitte geben Sie gültige Werte ein:\n" "Start PA: >= 0.0\n" @@ -15463,6 +19509,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Temperatur Test" +msgid "Filament type" +msgstr "Filamenttyp" + msgid "PLA" msgstr "PLA" @@ -15484,9 +19533,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filamenttyp" - msgid "Start temp: " msgstr "Starttemperatur" @@ -15496,16 +19542,19 @@ msgstr "Endtemperatur" msgid "Temp step: " msgstr "Temp Schrittweite" +msgid "Wiki Guide: Temperature Calibration" +msgstr "Wiki Anleitung: Temperatur Kalibrierung" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" "Bitte geben Sie gültige Werte ein:\n" "Starttemperatur: <= 350\n" "Endtemperatur: >= 170\n" -"Starttemperatur > Endtemperatur + 5)" +"Starttemperatur >= Endtemperatur + 5" msgid "Max volumetric speed test" msgstr "Test zur maximalen Volumengeschwindigkeit" @@ -15516,19 +19565,19 @@ msgstr "Start-Volumengeschwindigkeit" msgid "End volumetric speed: " msgstr "End-Volumengeschwindigkeit" -msgid "step: " -msgstr "Schrittweite" +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "Wiki Anleitung: Volumetrische Geschwindigkeitskalibrierung" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Bitte geben Sie gültige Werte ein:\n" "Start > 0 \n" "Schritt >= 0\n" -"Ende > Start + Schritt)" +"Ende > Start + Schritt" msgid "VFA test" msgstr "VFA TEST" @@ -15539,16 +19588,19 @@ msgstr "Startgeschwindigkeit" msgid "End speed: " msgstr "Endgeschwindigkeit" +msgid "Wiki Guide: VFA" +msgstr "Wiki Anleitung: VFA" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Bitte geben Sie gültige Werte ein:\n" "Start > 10 \n" "Schritt >= 0\n" -"Ende > Start + Schritt)" +"Ende > Start + Schritt" msgid "Start retraction length: " msgstr "Start Rückzugslänge" @@ -15556,10 +19608,153 @@ msgstr "Start Rückzugslänge" msgid "End retraction length: " msgstr "Ende Rückzugslänge" -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "Wiki Anleitung: Rückzugskalibrierung" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "Input Shaping Frequenztest" + +msgid "Test model" +msgstr "Testmodell" + +msgid "Ringing Tower" +msgstr "Ringing Turm" + +msgid "Fast Tower" +msgstr "Schneller Turm" + +msgid "Input shaper type" +msgstr "Input Shaper Typ" + +msgid "Frequency (Start / End): " +msgstr "Frequenz (Start / Ende): " + +msgid "Start / End" +msgstr "Start / Ende" + +msgid "Frequency settings" +msgstr "Frequenz Einstellungen" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "RepRap-Firmware verwendet denselben Frequenzbereich für beide Achsen." + +msgid "Damp: " +msgstr "Dämpfung: " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" +"Empfohlen: Stellen Sie Dämpfung auf 0 ein.\n" +"Dies verwendet den Standard- oder gespeicherten Wert des Druckers." + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "Wiki Anleitung: Input Shaping Kalibrierung" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Bitte geben Sie gültige Werte ein:\n" +"(0 < FreqStart < FreqEnd < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" +"Bitte geben Sie einen gültigen Dämpfungsfaktor ein (0 < Dämpfung/zeta Faktor " +"<= 1)" + +msgid "Input shaping Damp test" +msgstr "Input Shaping Dämpfungstest" + +msgid "Frequency: " +msgstr "Frequenz: " + +msgid "Frequency" +msgstr "Frequenz" + +msgid "Damp" +msgstr "Dämpfung" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "RepRap-Firmware verwendet dieselbe Frequenz für beide Achsen." + +msgid "Note: Use previously calculated frequencies." +msgstr "Hinweis: Verwenden Sie zuvor berechnete Frequenzen." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Bitte geben Sie gültige Werte ein:\n" +"(0 < Freq < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Bitte geben Sie einen gültigen Dämpfungsfaktor ein (0 <= DampingStart < " +"DampingEnd <= 1)" + +msgid "Cornering test" +msgstr "Eckentest" + +msgid "SCV-V2" +msgstr "SCV-V2" + +msgid "Start: " +msgstr "Start: " + +msgid "End: " +msgstr "Ende: " + +msgid "Cornering settings" +msgstr "Eckeneinstellungen" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" +"Hinweis: Niedrigere Werte = schärfere Ecken, aber langsamere " +"Geschwindigkeiten.\n" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" +"Marlin 2 Junction Deviation erkannt:\n" +"Um Classic Jerk zu testen, setzen Sie 'Maximale Junction Deviation' in der " +"Bewegungsfähigkeit auf 0." + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" +"Marlin 2 Classic Jerk erkannt:\n" +"Um Junction Deviation zu testen, setzen Sie 'Maximale Junction Deviation' in " +"der Bewegungsfähigkeit auf einen Wert > 0." + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" +"RepRap erkannt: Jerk in mm/s.\n" +"Snapmaker Orca konvertiert die Werte bei Bedarf in mm/min." + +msgid "Wiki Guide: Cornering Calibration" +msgstr "Wiki Anleitung: Eckenkalibrierung" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" +"Bitte geben Sie gültige Werte ein:\n" +"(0 <= Cornering <= %s)" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "Hinweis: Hohe Werte können zu Schichverschiebungen führen (>%s)" + +msgid "Send G-code to printer host" msgstr "Senden Sie G-Code an den Drucker-Host" msgid "Upload to Printer Host with the following filename:" @@ -15609,18 +19804,37 @@ msgstr "Ausgewählten abbrechen" msgid "Show error message" msgstr "Fehlermeldung Anzeigen" -msgid "Enqueued" +msgid "Queued" msgstr "In Warteschlange" msgid "Uploading" msgstr "Hochladen" -msgid "Cancelling" +msgid "Canceling" msgstr "Wird abgebrochen" msgid "Error uploading to print host" msgstr "Fehler beim Hochladen zum Druck-Host" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Der ausgewählte Betttyp stimmt nicht mit der Datei überein. Bitte bestätigen " +"Sie dies, bevor Sie mit dem Druck beginnen." + +msgid "Time-lapse" +msgstr "Zeitraffer" + +msgid "Heated Bed Leveling" +msgstr "Beheiztes Bett Nivellierung" + +msgid "Textured Build Plate (Side A)" +msgstr "Strukturierte Bauplatte (Seite A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Glatte Bauplatte (Seite B)" + msgid "Unable to perform boolean operation on selected parts" msgstr "" "Die boolesche Operation kann auf den ausgewählten Teilen nicht durchgeführt " @@ -15683,14 +19897,14 @@ msgstr "System Version:" msgid "DNS Server:" msgstr "DNS Server:" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Test Snapmaker Orca (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Test Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "Test bing.com" msgid "Test bing.com:" msgstr "Test bing.com:" @@ -15757,7 +19971,7 @@ msgstr "" "benutzerdefinierten Hersteller eingeben." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" oder \"Generic\" kann nicht als Hersteller für benutzerdefinierte " "Filamente verwendet werden." @@ -15765,7 +19979,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "Filamenttyp ist nicht ausgewählt, bitte Filamenttyp erneut auswählen." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "" "Filament-Seriennummer ist nicht eingegeben, bitte Seriennummer eingeben." @@ -15781,7 +19995,7 @@ msgstr "" "Alle Eingaben im benutzerdefinierten Hersteller oder in der Seriennummer " "bestehen aus Leerzeichen. Bitte erneut eingeben." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "Der Hersteller kann keine Zahl sein. Bitte erneut eingeben." msgid "" @@ -15792,17 +20006,17 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Der Filamentname %s, den Sie erstellt haben, existiert bereits. \n" +"Der Filamentname %s, den Sie erstellt haben, existiert bereits.\n" "Wenn Sie mit der Erstellung fortfahren, wird die erstellte Voreinstellung " "mit ihrem vollständigen Namen angezeigt. Möchten Sie fortfahren?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "" -"Einige vorhandene Voreinstellungen konnten nicht erstellt werden, wie " +"Einige vorhandenen Voreinstellungen konnten nicht erstellt werden, wie " "folgt:\n" msgid "" @@ -15814,13 +20028,13 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer @Drucker, " -"den Sie ausgewählt haben\" umbenennen. \n" -"Um Voreinstellungen für weitere Drucker hinzuzufügen, gehen Sie bitte zur " -"Druckerauswahl" +"den Sie ausgewählt haben\" umbenennen.\n" +"Um weitere Voreinstellungen für weitere Drucker hinzuzufügen, gehen Sie " +"bitte zur Druckerauswahl" msgid "Create Printer/Nozzle" msgstr "Drucker/Düse erstellen" @@ -15843,21 +20057,27 @@ msgstr "Voreinstellung importieren" msgid "Create Type" msgstr "Typ erstellen" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "Das Modell ist nicht gefunden, bitte Hersteller erneut auswählen." -msgid "Select Model" -msgstr "Modell auswählen" - msgid "Select Printer" msgstr "Drucker auswählen" +msgid "Select Model" +msgstr "Modell auswählen" + msgid "Input Custom Model" msgstr "Benutzerdefiniertes Modell eingeben" msgid "Can't find my printer model" msgstr "Ich kann mein Druckermodell nicht finden" +msgid "Input Custom Nozzle Diameter" +msgstr "Benutzerdefinierten Düsendurchmesser eingeben" + +msgid "Can't find my nozzle diameter" +msgstr "Ich kann meinen Düsendurchmesser nicht finden" + msgid "Rectangle" msgstr "Rechteck" @@ -15865,16 +20085,10 @@ msgid "Printable Space" msgstr "Druckbarer Raum" msgid "Hot Bed STL" -msgstr "Hot Bed STL" - -msgid "Load stl" -msgstr "STL laden" +msgstr "Heiz Bett STL" msgid "Hot Bed SVG" -msgstr "Hot Bed SVG" - -msgid "Load svg" -msgstr "SVG laden" +msgstr "Heiz Bett SVG" msgid "Max Print Height" msgstr "Maximale Druckhöhe" @@ -15886,16 +20100,16 @@ msgstr "Die Datei überschreitet %d MB, bitte erneut importieren." msgid "Exception in obtaining file size, please import again." msgstr "Ausnahme beim Abrufen der Dateigröße, bitte erneut importieren." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Voreinstellungspfad nicht gefunden, bitte Hersteller erneut auswählen." msgid "The printer model was not found, please reselect." msgstr "Das Druckermodell wurde nicht gefunden, bitte erneut auswählen." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Der Düsendurchmesser ist nicht gefunden, bitte erneut auswählen." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "Die Druckervoreinstellung ist nicht gefunden, bitte erneut auswählen." msgid "Printer Preset" @@ -15910,15 +20124,12 @@ msgstr "Alle abwählen" msgid "Process Preset Template" msgstr "Prozess Vorlagen Voreinstellung" -msgid "Back Page 1" -msgstr "Zurück Seite 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Sie haben noch nicht ausgewählt, welche Druckervoreinstellung erstellt " -"werden soll. Bitte wählen Sie den Hersteller und das Modell des Druckers" +"Sie haben noch nicht ausgewählt welche Druckervoreinstellung erstellt werden " +"soll. Bitte wählen Sie den Hersteller und das Modell des Druckers" msgid "" "You have entered an illegal input in the printable area section on the first " @@ -15927,11 +20138,6 @@ msgstr "" "Sie haben eine ungültige Eingabe im Bereich des druckbaren Bereichs auf der " "ersten Seite eingegeben. Bitte überprüfen Sie es, bevor Sie es erstellen." -msgid "The custom printer or model is not inputed, place input." -msgstr "" -"Der benutzerdefinierte Drucker oder das Modell ist nicht eingegeben, bitte " -"eingeben." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15942,14 +20148,14 @@ msgid "" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" "Die von Ihnen erstellte Druckervoreinstellung hat bereits eine " -"Voreinstellung mit dem gleichen Namen. Möchten Sie es überschreiben?\n" +"Voreinstellung mit dem gleichen Namen. Möchten Sie diese überschreiben?\n" "\tJa: Überschreiben Sie die Druckervoreinstellung mit dem gleichen Namen, " -"und Filament- und Prozessvoreinstellungen mit dem gleichen Voreinstellungs- " -"und Filament- und Prozessvornamen werden neu erstellt \n" -"und Filament- und Prozessvoreinstellungen ohne den gleichen " -"Voreinstellungsnamen werden beibehalten.\n" -"\tAbbrechen: Erstellen Sie keine Voreinstellung, kehren Sie zur Erstellungs-" -"Schnittstelle zurück." +"Filament- und Prozessvoreinstellungen mit dem gleichen Voreinstellungs- " +"Filament- und Prozessnamen werden neu erstellt \n" +"Filament- und Prozessvoreinstellungen ohne den gleichen Voreinstellungsnamen " +"bleiben erhalten.\n" +"\tAbbrechen: Es wird keine neue Voreinstellung erzeugt, zurück zur " +"Einstellungs-Seite wechseln." msgid "You need to select at least one filament preset." msgstr "Sie müssen mindestens eine Filament-Voreinstellung auswählen." @@ -15963,14 +20169,14 @@ msgstr "Erstellen von Filament-Voreinstellungen fehlgeschlagen. Wie folgt:\n" msgid "Create process presets failed. As follows:\n" msgstr "Erstellen von Prozess-Voreinstellungen fehlgeschlagen. Wie folgt:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Hersteller nicht gefunden, bitte erneut auswählen." msgid "Current vendor has no models, please reselect." msgstr "Der aktuelle Hersteller hat keine Modelle, bitte erneut auswählen." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "Sie haben den Hersteller und das Modell nicht ausgewählt oder den " @@ -15999,10 +20205,21 @@ msgstr "" "Sie haben den Drucker, der die Düse ersetzen soll, noch nicht ausgewählt, " "bitte wählen Sie." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" +"Der eingegebene Düsendurchmesser ist ungültig, bitte erneut eingeben:\n" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" +"Die Systemvoreinstellung erlaubt keine Erstellung. \n" +"Bitte geben Sie das Druckermodell oder den Düsendurchmesser erneut ein." + +msgid "Printer Created Successfully" msgstr "Drucker erfolgreich erstellt" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Filament erfolgreich erstellt" msgid "Printer Created" @@ -16033,14 +20250,14 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Studio hat festgestellt, dass Ihre Benutzervoreinstellungen-" "Synchronisierungs-Funktion nicht aktiviert ist, was zu fehlerhaften Filament-" -"Einstellungen auf der Geräteseite führen kann. \n" +"Einstellungen auf der Geräteseite führen kann.\n" "Klicken Sie auf \"Benutzervoreinstellungen synchronisieren\", um die " "Synchronisierungsfunktion zu aktivieren." @@ -16092,19 +20309,29 @@ msgstr "" "Wenn nicht, wird ein Zeitstempel hinzugefügt, und Sie können den Namen nach " "der Erstellung ändern." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" +"Die Datei: %s\n" +"wurde möglicherweise von einem anderen Programm geöffnet.\n" +"Bitte schließen Sie es und versuchen Sie es erneut." + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Drucker und alle Filament- und Prozessvoreinstellungen, die zum Drucker " -"gehören. \n" +"gehören.\n" "Kann mit anderen geteilt werden." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Benutzerfüllung Voreinstellung eingestellt. \n" +"Benutzerfüllung Voreinstellung eingestellt.\n" "Kann mit anderen geteilt werden." msgid "" @@ -16167,7 +20394,7 @@ msgstr "" "Hinweis: Wenn die einzige Voreinstellung unter diesem Filament gelöscht " "wird, wird das Filament nach dem Verlassen des Dialogfelds gelöscht." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "" "Voreinstellungen, die von anderen Voreinstellungen geerbt wurden, können " "nicht gelöscht werden" @@ -16180,6 +20407,16 @@ msgstr[1] "Die folgende Voreinstellung erbt diese Voreinstellung." msgid "Delete Preset" msgstr "Voreinstellung löschen" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Sind Sie sicher, dass Sie das ausgewählte Profil löschen möchten?\n" +"Wenn das Profil einem Filament entspricht, das derzeit auf Ihrem Drucker " +"verwendet wird, setzen Sie bitte die Filamentinformationen für diesen Slot " +"zurück." + msgid "Are you sure to delete the selected preset?" msgstr "Möchten Sie die ausgewählte Voreinstellung wirklich löschen?" @@ -16189,16 +20426,13 @@ msgstr "Voreinstellung löschen" msgid "+ Add Preset" msgstr "+ Voreinstellung hinzufügen" -msgid "Delete Filament" -msgstr "Filament löschen" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Alle Filamentvoreinstellungen, die zu diesem Filament gehören, werden " -"gelöscht. \n" +"gelöscht.\n" "Wenn Sie dieses Filament auf Ihrem Drucker verwenden, setzen Sie bitte die " "Filamentinformationen für diesen Schacht zurück." @@ -16234,20 +20468,39 @@ msgid "Daily Tips" msgstr "Tägliche Tipps" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "Düse gemerkt: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" -msgstr "" -"Ihr Düsendurchmesser im Profil stimmt nicht mit dem gemerkten " -"Düsendurchmesser überein. Haben Sie Ihre Düse kürzlich gewechselt?" +msgid "nozzle size in preset: %d" +msgstr "Düsengröße in Voreinstellung: %d" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle size memorized: %d" +msgstr "Düsengröße gespeichert: %d" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"*Drucken von %s Material mit %s kann zu einer Beschädigung der Düse führen" +"Die Größe des Düsentypen in der Voreinstellung stimmt nicht mit der " +"gespeicherten Düse überein. Haben Sie Ihre Düse kürzlich gewechselt ?" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "Düse[%d] in Voreinstellung: %.1f" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "Düse[%d] gespeichert: %.1f" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" +"Ihre Düsenart in der Voreinstellung stimmt nicht mit der gespeicherten Düse " +"überein. Haben Sie Ihre Düse kürzlich gewechselt?" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" +"Drucken von %1s Material mit %2s Düse kann zu Düsenbeschädigung führen." msgid "Need select printer" msgstr "Drucker auswählen" @@ -16255,6 +20508,50 @@ msgstr "Drucker auswählen" msgid "The start, end or step is not valid value." msgstr "Der Start, das Ende oder der Schritt ist kein gültiger Wert." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" +"Die Anzahl der Drucker-Extruder und der für die Kalibrierung ausgewählte " +"Drucker stimmen nicht überein." + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Bitte klicken Sie auf die Schaltfläche Synchronisieren oben und starten Sie " +"die Kalibrierung neu." + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"Der Düsendurchmesser stimmt nicht mit dem tatsächlichen Düsendurchmesser des " +"Druckers überein.\n" +"Bitte klicken Sie auf die Schaltfläche Synchronisieren oben und starten Sie " +"die Kalibrierung neu." + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"Die aktuell ausgewählte Düsenart des %s-Extruders stimmt nicht mit der " +"gespeicherten Düsenart überein. \n" +"Bitte klicken Sie auf die Schaltfläche Synchronisieren oben und " + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" +"Die automatische Kalibrierung unterstützt nur Fälle, in denen die linken und " +"rechten Düsendurchmesser identisch sind." + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -16277,9 +20574,6 @@ msgstr "Erfolgreich!" msgid "Are you sure to log out?" msgstr "Sind Sie sicher, dass Sie sich abmelden möchten?" -msgid "Refresh Printers" -msgstr "Drucker aktualisieren" - msgid "View print host webui in Device tab" msgstr "Druck-Host-Webui im Geräte-Tab anzeigen" @@ -16326,22 +20620,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Typ des Druck-Hosts: %s ist falsch" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "Verbindung zum AstroBox funktioniert korrekt." msgid "Could not connect to AstroBox" msgstr "Konnte keine Verbindung zum AstroBox herstellen" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Hinweis: AstroBox Version mindestens 1.1.0 ist erforderlich." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Verbindung zu Duet funktioniert korrekt." msgid "Could not connect to Duet" msgstr "Konnte keine Verbindung zu Duet herstellen" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Unbekannter Fehler aufgetreten" msgid "Wrong password" @@ -16353,7 +20647,7 @@ msgstr "Konnte keine Ressourcen zum Erstellen einer neuen Verbindung erzeugen" msgid "Upload not enabled on FlashAir card." msgstr "Upload auf FlashAir-Karte nicht aktiviert." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "Verbindung zu FlashAir funktioniert korrekt und Upload ist aktiviert." msgid "Could not connect to FlashAir" @@ -16366,28 +20660,28 @@ msgstr "" "Hinweis: FlashAir mit Firmware 2.00.02 oder neuer und aktivierter Upload-" "Funktion ist erforderlich." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "Verbindung zu MKS funktioniert korrekt." msgid "Could not connect to MKS" msgstr "Konnte keine Verbindung zu MKS herstellen" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "Verbindung zu OctoPrint funktioniert korrekt." msgid "Could not connect to OctoPrint" msgstr "Konnte keine Verbindung zu OctoPrint herstellen" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Hinweis: OctoPrint Version mindestens 1.1.0 ist erforderlich." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Verbindung zu Prusa SL1 / SL1S funktioniert korrekt." msgid "Could not connect to Prusa SLA" msgstr "Konnte keine Verbindung zu Prusa SLA herstellen" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "Verbindung zu PrusaLink funktioniert korrekt." msgid "Could not connect to PrusaLink" @@ -16413,19 +20707,19 @@ msgstr "" "Der Upload ist fehlgeschlagen. Es wurde kein geeigneter Speicherplatz unter " "%1% gefunden." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Verbindung zu Prusa Connect funktioniert korrekt." msgid "Could not connect to Prusa Connect" msgstr "Konnte keine Verbindung zu Prusa Connect herstellen" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Verbindung zu Repetier funktioniert korrekt." msgid "Could not connect to Repetier" msgstr "Konnte keine Verbindung zu Repetier herstellen" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Hinweis: Repetier Version mindestens 0.90.0 ist erforderlich." #, boost-format @@ -16457,8 +20751,8 @@ msgstr "" "Fehler: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Es hat eine kleine Schichthöhe und führt zu fast vernachlässigbaren " "Schichtlinien und hoher Druckqualität. Es ist für die meisten allgemeinen " @@ -16466,8 +20760,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es niedrigere " "Geschwindigkeiten und Beschleunigungen, und das spärliche Füllmuster ist " @@ -16476,8 +20770,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine etwas größere " "Schichthöhe und führt zu fast vernachlässigbaren Schichtlinien und einer " @@ -16485,8 +20779,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine größere " "Schichthöhe und führt zu leicht sichtbaren Schichtlinien, aber einer " @@ -16494,18 +20787,18 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine kleinere " +"Verglichen mit dem Standardprofil einer 0,2 mm Düse hat es eine kleinere " "Schichthöhe und führt zu fast unsichtbaren Schichtlinien und einer höheren " -"Druckqualität, aber einer kürzeren Druckzeit." +"Druckqualität, aber einer längeren Druckzeit." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es kleinere Schicht-" "linien, niedrigere Geschwindigkeiten und Beschleunigungen, und das spärliche " @@ -16513,19 +20806,19 @@ msgstr "" "eine wesentlich höhere Druckqualität, aber eine wesentlich längere Druckzeit." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine kleinere " -"Schichthöhe und führt zu minimalen Schichtlinien und einer höheren " -"Druckqualität, aber einer kürzeren Druckzeit." +"Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es kleinere Schicht-" +"höhen. Als Ergebnis weniger Layer Linien bessere Qualität aber länger " +"Druckzeit" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es kleinere Schicht-" "linien, niedrigere Geschwindigkeiten und Beschleunigungen, und das spärliche " @@ -16533,16 +20826,16 @@ msgstr "" "wesentlich höhere Druckqualität, aber eine wesentlich längere Druckzeit." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Es hat eine allgemeine Schichthöhe und führt zu allgemeinen Schichtlinien " "und Druckqualität. Es ist für die meisten allgemeinen Druckfälle geeignet." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es mehr Wand-Schleifen " "und eine höhere spärliche Fülldichte. Daher ergibt sich eine höhere " @@ -16551,8 +20844,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine größere " "Schichthöhe und führt zu deutlicheren Schichtlinien und einer niedrigeren " @@ -16560,8 +20853,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine größere " "Schichthöhe und führt zu deutlicheren Schichtlinien und einer niedrigeren " @@ -16569,8 +20862,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine kleinere " "Schichthöhe und führt zu weniger deutlichen Schichtlinien und einer höheren " @@ -16579,8 +20872,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine kleinere " "Schichthöhe, niedrigere Geschwindigkeiten und Beschleunigungen, und das " @@ -16590,8 +20883,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine kleinere " "Schichthöhe und führt zu fast vernachlässigbaren Schichtlinien und einer " @@ -16600,8 +20893,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine kleinere " "Schichthöhe, niedrigere Geschwindigkeiten und Beschleunigungen, und das " @@ -16611,24 +20904,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,4 mm Düse hat es eine kleinere " "Schichthöhe und führt zu fast vernachlässigbaren Schichtlinien und einer " "längeren Druckzeit." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Es hat eine große Schichthöhe und führt zu deutlichen Schichtlinien und " "normaler Druckqualität und Druckzeit." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,6 mm Düse hat es mehr Wand-Schleifen " "und eine höhere spärliche Fülldichte. Daher ergibt sich eine höhere " @@ -16637,8 +20929,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,6 mm Düse hat es eine größere " "Schichthöhe und führt zu deutlicheren Schichtlinien und einer niedrigeren " @@ -16646,8 +20938,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,6 mm Düse hat es eine größere " "Schichthöhe und führt zu wesentlich deutlicheren Schichtlinien und einer " @@ -16656,8 +20948,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,6 mm Düse hat es eine kleinere " "Schichthöhe und führt zu weniger deutlichen Schichtlinien und einer leicht " @@ -16665,45 +20957,44 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Im Vergleich zum Standardprofil einer 0,6 mm Düse hat es eine kleinere " "Schichthöhe und führt zu weniger deutlichen Schichtlinien und einer höheren " "Druckqualität, aber einer längeren Druckzeit." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" "Es hat eine sehr große Schichthöhe und führt zu sehr deutlichen " -"Schichtlinien, niedriger Druckqualität und allgemeiner Druckzeit." +"Schichtlinien, niedriger Druckqualität und kürzerer Druckzeit." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine größere " -"Schichthöhe und führt zu sehr deutlichen Schichtlinien und einer viel " -"niedrigeren Druckqualität, aber einer kürzeren Druckzeit in einigen " -"Druckfällen." +"Schichthöhe und führt zu deutlich sichtbaren Schichtlinien und einer " +"niedrigeren Druckqualität, aber in einigen Fällen zu einer kürzeren " +"Druckzeit." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine viel größere " "Schichthöhe und führt zu extrem deutlichen Schichtlinien und einer viel " -"niedrigeren Druckqualität, aber einer wesentlich kürzeren Druckzeit in " -"einigen Druckfällen." +"niedrigeren Druckqualität, aber in einigen Fällen zu einer viel kürzeren " +"Druckzeit." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine etwas kleinere " "Schichthöhe und führt zu etwas weniger, aber immer noch deutlichen " @@ -16712,13 +21003,392 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." msgstr "" "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine kleinere " "Schichthöhe und führt zu weniger, aber immer noch deutlichen Schichtlinien " "und einer leicht höheren Druckqualität, aber einer längeren Druckzeit in " -"einigen Druckfällen." +"einigen Fällen." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" +"Dies ist weder ein häufig verwendetes Filament noch eines der Bambu-" +"Filamente, und es variiert stark von Marke zu Marke. Daher wird dringend " +"empfohlen, vor dem Drucken den Händler nach einem geeigneten Profil zufragen " +"und einige Parameter entsprechend den Leistungen anzupassen." + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" +"Wenn Sie dieses Filament drucken, besteht die Gefahr von Verzug und geringer " +"Schichthaftungsfestigkeit. Für bessere Ergebnisse lesen Sie bitte dieses " +"Wiki: Drucktipps für Hochtemperatur- / Ingenieurmaterialien." + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" +"Beim Drucken dieses Filaments besteht die Gefahr von Düsenverstopfung, " +"Nachlaufen, Verzug und geringer Schichthaftungsfestigkeit. Für bessere " +"Ergebnisse lesen Sie bitte dieses Wiki: Drucktipps für Hochtemperatur- / " +"Ingenieurmaterialien." + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" +"Um bessere transparente oder durchscheinende Ergebnisse mit dem " +"entsprechenden Filament zu erzielen, lesen Sie bitte dieses Wiki: Drucktipps " +"für transparentes PETG." + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" +"Um den Drucken einen höheren Glanz zu verleihen, trocknen Sie das Filament " +"vor der Verwendung und stellen Sie die Außengeschwindigkeit der Wand beim " +"Slicen auf 40 bis 60 mm/s ein." + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" +"Dieses Filament wird normalerweise nur zum Drucken von Modellen mit geringer " +"Dichte verwendet, und es sind einige spezielle Parameter erforderlich. Für " +"bessere Druckqualität lesen Sie bitte dieses Wiki: Anweisungen zum Drucken " +"von RC-Modellen mit schäumendem PLA (PLA Aero)." + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" +"Dieses Filament wird normalerweise nur zum Drucken von Modellen mit geringer " +"Dichte verwendet, und es sind einige spezielle Parameter erforderlich. Für " +"bessere Druckqualität lesen Sie bitte dieses Wiki: ASA Aero Printing Guide." + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" +"Dieses Filament ist zu weich und nicht mit dem AMS kompatibel. Der Druck " +"dieses Filaments hat viele Anforderungen, und um eine bessere Druckqualität " +"zu erzielen, lesen Sie bitte dieses Wiki: TPU-Druckanleitung." + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" +"Dieses Filament hat eine ausreichend hohe Härte (ca. 67D) und ist mit dem " +"AMS kompatibel. Der Druck dieses Filaments hat viele Anforderungen, und um " +"eine bessere Druckqualität zu erzielen, lesen Sie bitte dieses Wiki: TPU-" +"Druckanleitung." + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" +"Wenn Sie eine Art weiches TPU drucken möchten, schneiden Sie bitte nicht mit " +"diesem Profil, und es ist nur für TPU mit ausreichend hoher Härte (nicht " +"weniger als 55D) und ist mit dem AMS kompatibel. Für eine bessere " +"Druckqualität lesen Sie bitte dieses Wiki: TPU-Druckanleitung." + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" +"Dies ist ein wasserlösliches Stützfilament und wird normalerweise nur für " +"die Stützstruktur und nicht für den Modellkörper verwendet. Der Druck dieses " +"Filaments hat viele Anforderungen, und um eine bessere Druckqualität zu " +"erzielen, lesen Sie bitte dieses Wiki: PVA-Druckanleitung." + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" +"Dies ist ein nicht wasserlösliches Stützfilament und wird normalerweise nur " +"für die Stützstruktur und nicht für den Modellkörper verwendet. Für eine " +"bessere Druckqualität lesen Sie bitte dieses Wiki: Drucktipps für " +"Stützfilament und Stützfunktion." + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" +"Die generischen Voreinstellungen sind konservativ abgestimmt, um mit einer " +"breiteren Palette von Filamenten kompatibel zu sein. Für eine höhere " +"Druckqualität und -geschwindigkeit verwenden Sie bitte Bambu-Filamente mit " +"Bambu-Voreinstellungen." + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" +"Hochwertiges Profil für 0,2 mm Düse, das die Druckqualität priorisiert." + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" +"Hochwertiges Profil für 0,16 mm Schichthöhe, das Druckqualität und " +"Festigkeit priorisiert." + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" +"Standardprofil für 0,16 mm Schichthöhe, das die Geschwindigkeit priorisiert." + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" +"Hochwertiges Profil für 0,2 mm Schichthöhe, das Festigkeit und Druckqualität " +"priorisiert." + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "Standardprofil für 0,4 mm Düse, das die Geschwindigkeit priorisiert." + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "Strength profile for 0.6mm nozzle, prioritizing strength." + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "Standard profile for 0.6mm nozzle, prioritizing speed." + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "High quality profile for 0.8mm nozzle, prioritizing print quality." + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "Strength profile for 0.8mm nozzle, prioritizing strength." + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "Standard profile for 0.8mm nozzle, prioritizing speed." + +msgid "No AMS" +msgstr "Kein AMS" + +msgid "There is no device available to send printing." +msgstr "Es ist kein Gerät verfügbar, um den Druck zu senden." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" +"Die Anzahl der gleichzeitig verwendeten Drucker darf nicht gleich 0 sein." + +msgid "Use External Spool" +msgstr "Externe Spule verwenden" + +msgid "Select Printers" +msgstr "Drucker auswählen" + +msgid "Device Name" +msgstr "Gerätename" + +msgid "Device Status" +msgstr "Gerätestatus" + +msgid "AMS Status" +msgstr "AMS-Status" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Wählen Sie hier die Geräte aus, die Sie verwalten möchten (bis zu 6 Geräte)" + +msgid "Printing Options" +msgstr "Druckoptionen" + +msgid "Bed Leveling" +msgstr "Druckbettnivellierung" + +msgid "Flow Dynamic Calibration" +msgstr "Dynamische Flusskalibrierung" + +msgid "Send Options" +msgstr "Senden-Optionen" + +msgid "Send to" +msgstr "Senden an" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"Drucker gleichzeitig drucken.(Es hängt davon ab, wie viele Geräte " +"gleichzeitig erhitzt werden können.)" + +msgid "Wait" +msgstr "Warten" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"Minute pro Charge.(Es hängt davon ab, wie lange es dauert, die Erhitzung " +"abzuschließen.)" + +msgid "Task Sending" +msgstr "Aufgabe senden" + +msgid "Task Sent" +msgstr "Aufgabe gesendet" + +msgid "Edit multiple printers" +msgstr "Mehrere Drucker bearbeiten" + +msgid "Select connected printers (0/6)" +msgstr "Verbundene Drucker auswählen (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Verbundene Drucker auswählen (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" +"Die maximale Anzahl von Druckern, die ausgewählt werden können, beträgt %d" + +msgid "No task" +msgstr "Keine Aufgabe" + +msgid "Edit Printers" +msgstr "Drucker bearbeiten" + +msgid "Task Name" +msgstr "Aufgabenname" + +msgid "Actions" +msgstr "Aktionen" + +msgid "Task Status" +msgstr "Aufgabenstatus" + +msgid "Sent Time" +msgstr "Sende Zeit" + +msgid "There are no tasks to be sent!" +msgstr "Es gibt keine Aufgaben, die gesendet werden sollen!" + +msgid "No historical tasks!" +msgstr "Keine historischen Aufgaben!" + +msgid "Upgrading" +msgstr "Aktualisieren" + +msgid "syncing" +msgstr "synchronisieren" + +msgid "Printing Finish" +msgstr "Druck beendet" + +msgid "Printing Failed" +msgstr "Druck fehlgeschlagen" + +msgid "Printing Pause" +msgstr "Druck pausiert" + +msgid "Pending" +msgstr "Ausstehend" + +msgid "Sending" +msgstr "Sende" + +msgid "Sending Finish" +msgstr "Senden beendet" + +msgid "Sending Cancel" +msgstr "Senden abbrechen" + +msgid "Sending Failed" +msgstr "Senden fehlgeschlagen" + +msgid "Print Success" +msgstr "Druck erfolgreich" + +msgid "Print Failed" +msgstr "Druck fehlgeschlagen" + +msgid "Removed" +msgstr "Entfernt" + +msgid "Don't remind me again" +msgstr "Nicht mehr erinnern" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" +"Es wird kein weiteres Popup angezeigt. Sie können es in 'Einstellungen' " + +msgid "Filament-Saving Mode" +msgstr "Filament-Sparmodus" + +msgid "Convenience Mode" +msgstr "Komfortmodus" + +msgid "Custom Mode" +msgstr "Benutzerdefinierter Modus" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" +"Generiert die Filamentgruppierung für die linke und rechte Düse basierend " +"auf den filamentsparendsten Prinzipien, um Abfall zu minimieren" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" +"Generiert die Filamentgruppierung für die linke und rechte Düse basierend " +"auf dem tatsächlichen Filamentstatus des Druckers, wodurch die Notwendigkeit " +"manueller Filamenteinstellungen verringert wird" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "Weist das Filament manuell der linken oder rechten Düse zu" + +msgid "Global settings" +msgstr "Globale Einstellungen" + +msgid "Learn more" +msgstr "Mehr erfahren" + +msgid "(Sync with printer)" +msgstr "(Mit Drucker synchronisieren)" + +msgid "We will slice according to this grouping method:" +msgstr "Wir werden entsprechend dieser Gruppierungsmethode schneiden:" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" +"Tipps: Sie können die Filamente ziehen, um sie verschiedenen Düsen " +"zuzuweisen." + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" +"Die Filamentgruppierungsmethode für die aktuelle Platte wird durch die " +"Dropdown-Option an der Slicing-Platten-Schaltfläche bestimmt." msgid "Connected to Obico successfully!" msgstr "Erfolgreich mit Obico verbunden!" @@ -16743,11 +21413,13 @@ msgstr "" "SimplyPrint-Konto nicht verknüpft. Gehen Sie zu den Verbindungsoptionen, um " "es einzurichten." -msgid "Connection to Flashforge works correctly." -msgstr "Verbindung zu Flashforge funktioniert korrekt." +msgid "Serial connection to Flashforge is working correctly." +msgstr "Die serielle Verbindung zu Flashforge funktioniert korrekt." -msgid "Could not connect to Flashforge" -msgstr "Konnte keine Verbindung zu Flashforge herstellen" +msgid "Could not connect to Flashforge via serial" +msgstr "" +"Konnte keine Verbindung zu Flashforge über die serielle Schnittstelle " +"herstellen." msgid "The provided state is not correct." msgstr "Der bereitgestellte Status ist nicht korrekt." @@ -16762,9 +21434,116 @@ msgstr "" "Es ist etwas Unerwartetes passiert, als Sie versucht haben, sich anzumelden. " "Bitte versuchen Sie es erneut." -msgid "User cancelled." +msgid "User canceled." msgstr "Benutzer abgebrochen." +msgid "Head diameter" +msgstr "Kopfdurchmesser" + +msgid "Max angle" +msgstr "Maximaler Winkel" + +msgid "Detection radius" +msgstr "Erkennungsradius" + +msgid "Remove selected points" +msgstr "Ausgewählte Punkte entfernen" + +msgid "Remove all" +msgstr "Alle entfernen" + +msgid "Auto-generate points" +msgstr "Punkte automatisch generieren" + +msgid "Add a brim ear" +msgstr "Ein Mausohr hinzufügen" + +msgid "Delete a brim ear" +msgstr "Löschen Sie ein Mausohr" + +msgid "Adjust head diameter" +msgstr "Kopfdurchmesser anpassen" + +msgid "Adjust section view" +msgstr "Justieren Sie die Schnittansicht" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Achtung: Der Brim-Typ ist nicht auf \"bemalt\" eingestellt, auf die " +"Mausohren wirken sich das nicht aus!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Den Brim-Typ dieses Objekts auf \"bemalt\" setzen" + +msgid " invalid brim ears" +msgstr " ungültige Mausohren" + +msgid "Brim Ears" +msgstr "Mausohren" + +msgid "Please select single object." +msgstr "Bitte wählen Sie ein einzelnes Objekt aus." + +msgid "Zoom Out" +msgstr "Vergrößern" + +msgid "Zoom In" +msgstr "Verkleinern" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" +"Laden der Überspringobjektinformationen fehlgeschlagen. Bitte versuchen Sie " +"es erneut." + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "/%d ausgewählt" + +msgid "Nothing selected" +msgstr "Nichts ausgewählt" + +msgid "Over 64 objects in single plate" +msgstr "Über 64 Objekte in einer einzigen Platte" + +msgid "The current print job cannot be skipped" +msgstr "Der aktuelle Druckauftrag kann nicht übersprungen werden" + +msgid "Skipping all objects." +msgstr "Alle Objekte werden übersprungen." + +msgid "The printing job will be stopped. Continue?" +msgstr "Der Druckauftrag wird gestoppt. Fortsetzen?" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "Überspringen von %d Objekten." + +msgid "This action cannot be undone. Continue?" +msgstr "Diese Aktion kann nicht rückgängig gemacht werden. Fortsetzen?" + +msgid "Skipping objects." +msgstr "Objekte werden übersprungen." + +msgid "Continue" +msgstr "Fortsetzen" + +msgid "Select Filament" +msgstr "Filament auswählen" + +msgid "Null Color" +msgstr "Keine Farbe" + +msgid "Multiple Color" +msgstr "Mehrere Farben" + +msgid "Official Filament" +msgstr "Offizielles Filament" + +msgid "More Colors" +msgstr "Mehr Farben" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16845,11 +21624,11 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Tastenkombinationen verwenden\n" "Wussten Sie, dass Snapmaker Orca eine Vielzahl von Tastenkombinationen und 3D-" -"Szenenoperationen bietet." +"Szenenoperationen bietet?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16893,7 +21672,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatisch anordnen\n" "Wussten Sie, dass Sie alle Objekte in Ihrem Projekt automatisch anordnen " @@ -16903,7 +21682,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Automatisch ausrichten\n" "Wussten Sie, dass Sie Objekte durch einen einfachen Klick in eine optimale " @@ -17086,7 +21865,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Rand für bessere Haftung\n" @@ -17097,7 +21876,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Parameter für mehrere Objekte festlegen\n" "Wussten Sie schon, dass Sie die Slicingparameter für alle ausgewählten " @@ -17114,8 +21893,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Reinigen in Stützstrukturen/Objekten/Füllungen\n" "Wussten Sie schon, dass Sie die Menge an verschwendetem Filament reduzieren " @@ -17132,18 +21911,19 @@ msgstr "" "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandschleifen " "und eine höhere Dichte der Füllung verbessern können?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Wenn mit geöffneter Druckertür gedruckt werden muss\n" "Wussten Sie, dass das Öffnen der Druckertür die Wahrscheinlichkeit eines " "Verstopfens des Extruders/Hotends beim Drucken von Filamenten mit niedriger " -"Temperatur und höherer Gehäusetemperatur verringern kann. Weitere " +"Temperatur und höherer Gehäusetemperatur verringern kann? Weitere " "Informationen dazu finden Sie im Wiki." #: resources/data/hints.ini: [hint:Avoid warping] @@ -17151,12 +21931,1820 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Verwerfungen vermeiden\n" "Wussten Sie, dass beim Drucken von Materialien, die zu Verwerfungen neigen, " "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die " -"Wahrscheinlichkeit von Verwerfungen verringert werden kann." +"Wahrscheinlichkeit von Verwerfungen verringert werden kann?" + +#~ msgid "✖ Skipped %1%: %2%, same file\n" +#~ msgstr "✖ %1% übersprungen: %2%, gleiche Datei\n" + +#~ msgid "✖ Skipped %1%: %2% does not exist.\n" +#~ msgstr "✖ %1% übersprungen: %2% existiert nicht.\n" + +#~ msgid "✔ Replaced %1% with %2%\n" +#~ msgstr "✔ %1% durch %2% ersetzt\n" + +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Extruder %d" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptive Schichthöhe" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Wenn Sie diese Option aktivieren, wird die Höhe der Baumstützschicht " +#~ "außer der ersten automatisch berechnet." + +#~ msgid "Junction Deviation calibration" +#~ msgstr "Junction-Deviation-Kalibrierung" + +#~ msgid "Probing exclude area of Klumpen." +#~ msgstr "Abtasten des Ausschlussbereichs von Klumpen." + +#~ msgid "" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" +#~ msgstr "" +#~ "Maximale Verbindungsabweichung (M205 J, gilt nur, wenn JD > 0 für Marlin " +#~ "Firmware)" + +#~ msgid "Junction Deviation test" +#~ msgstr "Junction Deviation Test" + +#~ msgid "Start junction deviation: " +#~ msgstr "Start Junction Abweichung: " + +#~ msgid "End junction deviation: " +#~ msgstr "End Junction Abweichung: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Junction Deviation Einstellungen" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "" +#~ "Hinweis: Niedrigere Werte = schärfere Ecken, aber langsamere " +#~ "Geschwindigkeiten" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" +#~ msgstr "" +#~ "Bitte geben Sie gültige Werte ein:\n" +#~ "(0 <= Junction Abweichung < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "HINWEIS: Hohe Werte können zu Schichtverschiebungen führen" + +#~ msgid "AMS not connected" +#~ msgstr "AMS nicht verbunden" + +#~ msgid "Ext Spool" +#~ msgstr "Externe Spule" + +#~ msgid "Guide" +#~ msgstr "Anleitung" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS kalibrieren..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Während der Kalibrierung ist ein Problem aufgetreten. Klicken Sie hier, " +#~ "um die Lösung zu sehen." + +#~ msgid "Calibrate again" +#~ msgstr "Erneut Kalibrieren" + +#~ msgid "Cancel calibration" +#~ msgstr "Kalibrierung abbrechen" + +#~ msgid "Feed Filament" +#~ msgstr "Filament zuführen" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Vor dem Drucken über LAN muss eine MicroSD-Karte eingelegt werden." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Vor dem Senden an den Drucker muss eine SD-Karte eingelegt werden." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Hinweis: Es können nur die AMS-Slots ausgewählt werden, die mit demselben " +#~ "Materialtyp geladen sind." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Wenn sich zwei identische Filamente im AMS befinden, wird das AMS-" +#~ "Filament-Backup aktiviert.\n" +#~ "(Derzeit wird die automatische Versorgung mit Verbrauchsmaterialien mit " +#~ "derselben Marke, demselben Materialtyp und derselben Farbe unterstützt)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "Das AMS schätzt die verbleibende Kapazität des Bambu-Filaments, nachdem " +#~ "die Filamentinformationen aktualisiert wurden. Während des Drucks wird " +#~ "die verbleibende Kapazität automatisch aktualisiert." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Die empfohlene Mindesttemperatur liegt unter 190°C oder die empfohlene " +#~ "Maximaltemperatur liegt über 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Der Spiralmodes funktioniert nur, wenn die Wand-Schleifen auf 1 gesetzt " +#~ "sind,\n" +#~ "die Unterstützung deaktiviert ist, die oberen Schalenlagen auf 0 gesetzt " +#~ "sind, \n" +#~ "die Dichte des dünnen Innenfülls auf 0 gesetzt ist und der Typ des " +#~ "Zeitraffers auf \n" +#~ "traditional steht." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Frequenzmessung der XY-Mechanik" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausiert aufgrund leerem Filaments" + +#~ msgid "Heating hotend" +#~ msgstr "Heizen des Hotend" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Kalibrierung der Extrusion" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Der Druckvorgang wurde vom Benutzer angehalten" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pause, da die Abdeckung des Werkzeugkopfes abgefallen ist" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Kalibrieren des Materialflusses" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pausiert aufgrund einer Fehlfunktion der Düsentemperatur" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pausiert aufgrund einer Fehlfunktion der Heizbetttemperatur" + +#~ msgid "Skip step pause" +#~ msgstr "Überspringen der Pause" + +#~ msgid "Motor noise calibration" +#~ msgstr "Motorgeräuschkalibrierung" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pausiert aufgrund eines AMS-Verlustes" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Pausiert aufgrund einer zu niedrigen Geschwindigkeit des Heatbreak-Lüfters" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pausiert aufgrund eines Fehlers bei der Kammer-Temperaturregelung" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pausiert durch den vom Benutzer eingefügten G-Code" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pause bei Erkennung von der Düsenfilamentabdeckung" + +#~ msgid "Cutter error pause" +#~ msgstr "Pause bei Cutter-Fehler" + +#~ msgid "First layer error pause" +#~ msgstr "Pause bei Fehler der ersten Schicht" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pause bei Düsenverstopfung" + +#~ msgid "Fatal" +#~ msgstr "Fatal" + +#~ msgid "Serious" +#~ msgstr "Ernst" + +#~ msgid "Common" +#~ msgstr "Parameter" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Die aktuelle Kammer-Temperatur oder die Ziel-Kammer-Temperatur " +#~ "überschreitet 45℃. Um ein Verstopfen des Extruders zu vermeiden, ist es " +#~ "nicht erlaubt, Filament mit niedriger Temperatur (PLA/PETG/TPU) zu laden." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Filament mit niedriger Temperatur (PLA/PETG/TPU) ist im Extruder geladen. " +#~ "Um ein Verstopfen des Extruders zu vermeiden, ist es nicht erlaubt, die " +#~ "Kammertemperatur über 45℃ einzustellen." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF wird von AMS nicht unterstützt." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Ein Objekt wurde über die Begrenzung der Druckplatte gelegt oder " +#~ "überschreitet die Höhengrenze.\n" +#~ "Lösen Sie das Problem, indem Sie das Objekt vollständig auf die " +#~ "Druckplatte oder von der Druckplatte wegbewegen und stellen Sie sicher, " +#~ "dass die Höhe innerhalb des Bauvolumens liegt." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Sie finden ihn unter \"Einstellungen > Netzwerk > Verbindungscode\".\n" +#~ "auf dem Drucker, wie in der Abbildung gezeigt:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Das Durchsuchen von Dateien auf der MicroSD-Karte wird in der aktuellen " +#~ "Firmware nicht unterstützt. Bitte aktualisieren Sie die Drucker-Firmware." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Bitte überprüfen Sie, ob die MicroSD-Karte in den Drucker eingelegt ist.\n" +#~ "Wenn sie immer noch nicht gelesen werden kann, können Sie versuchen, die " +#~ "MicroSD-Karte zu formatieren." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "Das durchsuchen von Dateien auf der MicroSD-Karte wird im LAN-Only-Modus " +#~ "nicht unterstützt." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Speicher nicht verfügbar, MicroSD-Karte einlegen." + +#~ msgid "Cham" +#~ msgstr "Cham" + +#~ msgid "Still unload" +#~ msgstr "Entlade immer noch" + +#~ msgid "Still load" +#~ msgstr "Lade immer noch" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Kann ohne MicroSD-Karte nicht gestartet werden." + +#~ msgid "Update" +#~ msgstr "Update" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Die Sensibilität der Pause ist" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Keine AMS-Filamente. Bitte wählen Sie auf der Seite \"Gerät\" einen " +#~ "Drucker aus, um AMS-Informationen zu laden." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Bei der Synchronisierung von Filamenten mit dem AMS werden alle aktuell " +#~ "ausgewählten Filamentprofile und Farben gelöscht. Möchten Sie fortfahren?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Es wurde bereits eine Synchronisation durchgeführt. Möchtest du nur " +#~ "Änderungen synchronisieren oder alles neu synchronisieren?" + +#~ msgid "Sync" +#~ msgstr "Sync" + +#~ msgid "Resync" +#~ msgstr "Resync" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Es gibt einige unbekannte Filamente, die generischen Voreinstellungen " +#~ "zugeordnet sind. Bitte aktualisieren Sie Snapmaker Orca oder starten Sie " +#~ "Snapmaker Orca neu, um zu überprüfen, ob es ein Update für " +#~ "Systemvoreinstellungen gibt." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Möchten Sie die Original-SVGs mit ihren lokalen Pfaden in die 3MF-Datei " +#~ "speichern?\n" +#~ "Wenn Sie auf \"NEIN\" klicken, können alle SVGs im Projekt nicht mehr " +#~ "bearbeitet werden." + +#~ msgid "Private protection" +#~ msgstr "Privatsphäre" + +#~ msgid "General Settings" +#~ msgstr "Allgemeine Einstellungen" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Benachrichtigung \"Tipp des Tages\" nach dem Start anzeigen" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Wenn aktiviert, werden beim Start nützliche Hinweise angezeigt." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Reinigungsvolumen: Auto-Berechnung bei jeder Farbänderung." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Wenn aktiviert, wird bei jeder Farbänderung automatisch berechnet." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "Reinigungsvolumen: Auto-Berechnung bei jedem Filamentwechsel." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Wenn aktiviert, wird bei jedem Filamentwechsel automatisch berechnet." + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Druckplatte nach dem Klonen von Objekten automatisch anordnen" + +#~ msgid "Network" +#~ msgstr "Netzwerk" + +#~ msgid "User Sync" +#~ msgstr "Benutzer-Synchronisation" + +#~ msgid "System Sync" +#~ msgstr "System-Synchronisation " + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "URLs mit Snapmaker Orca verknüpfen" + +#~ msgid "every" +#~ msgstr "jede/r/s" + +#~ msgid "Downloads" +#~ msgstr "Downloads" + +#~ msgid "Dark Mode" +#~ msgstr "Dunkler Modus" + +#~ msgid "Home page and daily tips" +#~ msgstr "Startseite und tägliche Tipps" + +#~ msgid "Show home page on startup" +#~ msgstr "Startseite beim Starten anzeigen" + +#~ msgid "Please choose the filament color" +#~ msgstr "Bitte wählen Sie die Filamentfarbe aus." + +#~ msgid "Send print job to" +#~ msgstr "Druckauftrag senden an" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s überschreitet die Anzahl der AMS-Slots. Bitte aktualisieren " +#~ "Sie die Druckerfirmware, um die AMS-Slots-Zuordnung zu unterstützen." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament überschreitet die Anzahl der AMS-Slots. Bitte aktualisieren Sie " +#~ "die Druckerfirmware, um die AMS-Slots-Zuordnung zu unterstützen." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Die Zuordnung von Filamenten zu AMS-Slots wurde eingerichtet. Sie können " +#~ "oben auf ein Filament klicken, um dessen Zuordnung zu ändern" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Bitte klicken Sie oben auf jedes Filament, um den zugehörigen AMS-Slot " +#~ "anzugeben, bevor Sie den Druckauftrag abschicken" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Die Drucker-Firmware unterstützt nur die sequentielle Zuordnung von " +#~ "Filament => AMS-Slot." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Vor dem Drucken muss eine MicroSD-Karte eingelegt werden." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "" +#~ "Für die Aufnahme eines Zeitraffers muss eine MicroSD-Karte eingelegt " +#~ "werden." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "Düse im Preset: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "Düse gemerkt: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Ihr Düsendurchmesser in der gesliceten Datei stimmt nicht mit der " +#~ "gemerkten Düse überein. Wenn Sie Ihre Düse kürzlich gewechselt haben, " +#~ "gehen Sie zu Gerät > Drucker-Teile, um die Einstellungen zu ändern." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Das Drucken von Hochtemperaturmaterial (%s Material) mit %s kann zu einer " +#~ "Beschädigung der Düse führen" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Verbindung zum Drucker wird hergestellt. Während des Verbindungsvorgangs " + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Vorsicht bei der Verwendung! Die Flusskalibrierung auf einer " +#~ "strukturierten " + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Automatische Flusskalibrierung mit Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "An MicroSD-Karte des Druckers senden" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Bevor Sie die Datei an die SD-Karte des Druckers senden können, muss eine " +#~ "SD-Karte eingelegt werden." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "" +#~ "Der Drucker unterstützt nicht das Senden an die MicroSD-Karte des " +#~ "Druckers." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Die Anzahl der Farben sollte im Bereich [%d, %d] liegen." + +#~ msgid "Current filament colors:" +#~ msgstr "Aktuelle Filamentfarben:" + +#~ msgid "Quick set:" +#~ msgstr "Schnelleinstellung:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "" +#~ "Fügen Sie einen Verbrauchsmaterial-Extruder nach den vorhandenen " +#~ "Extrudern hinzu." + +#~ msgid "Cluster colors" +#~ msgstr "Clusterfarben" + +#~ msgid "Map Filament" +#~ msgstr "Filament zuordnen" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Hinweis: Die Farbe wurde ausgewählt, Sie können OK wählen \n" +#~ "um fortzufahren oder sie manuell anzupassen." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Warnung: Die Anzahl der neu hinzugefügten und \n" +#~ "aktuellen Extruder übersteigt 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Automatisch berechnen" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca würde jedes Mal die Reinigungsvolumen neu berechnen, wenn sich die " +#~ "Farbe des Filaments ändert. Sie können die automatische Berechnung in " +#~ "Snapmaker Orca > Einstellungen deaktivieren" + +#~ msgid "unloaded" +#~ msgstr "entladen" + +#~ msgid "loaded" +#~ msgstr "geladen" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Von" + +#~ msgid "To" +#~ msgstr "Zu" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Druck fortsetzen (Fehler akzeptabel)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Druck fortsetzen (Problem gelöst)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Schritt 1. Bitte bestätigen Sie, dass Snapmaker Orca und Ihr Drucker im " +#~ "selben LAN sind." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Schritt 2. Wenn die unten angezeigte IP und der Zugangscode von den " +#~ "tatsächlichen Werten auf Ihrem Drucker abweichen, korrigieren Sie diese." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Schritt 3. Bitte holen Sie sich die Geräte-SN von der Druckerseite; sie " +#~ "befindet sich normalerweise in den Geräteinformationen auf dem " +#~ "Druckerbildschirm." + +#~ msgid "Laser 10 W" +#~ msgstr "Laser 10W" + +#~ msgid "Laser 40 W" +#~ msgstr "Laser 40W" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " zu nahe an anderen; Beim Drucken kann es zu Kollisionen kommen." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Es können nicht mehrere Filamente mit einem großen Temperaturunterschied " +#~ "zusammen gedruckt werden. Andernfalls können der Extruder und die Düse " +#~ "während des Drucks blockiert oder beschädigt werden." + +#~ msgid "Ironing angle" +#~ msgstr "Glättwinkel" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Der Winkel, in dem das Glätten durchgeführt wird. Eine negative Zahl " +#~ "deaktiviert diese Funktion und verwendet die Standardmethode." + +#~ msgid "Remove small overhangs" +#~ msgstr "Kleine Überhänge entfernen" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Kleine Überhänge entfernen, die möglicherweise keine Stützstrukturen " +#~ "benötigen." + +#~ msgid "Width of the brim." +#~ msgstr "Breite des Überhangs." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Es wird nur eines der Ergebnisse mit demselben Namen gespeichert. Sind " +#~ "Sie sicher, dass Sie die anderen Ergebnisse überschreiben möchten?" + +#~ msgid "External Spool" +#~ msgstr "Externe Spule" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Bitte geben Sie gültige Werte ein:\n" +#~ "Starttemperatur: <= 350\n" +#~ "Endtemperatur: >= 170\n" +#~ "Starttemperatur > Endtemperatur + 5" + +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Empfohlen: Setzen Sie die Dämpfung auf 0.\n" +#~ "Dies verwendet die Standardeinstellung des Druckers oder den zuletzt " + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "Der benutzerdefinierte Drucker oder das Modell ist nicht eingegeben, " +#~ "bitte eingeben." + +#~ msgid "BigTraffic" +#~ msgstr "Großer Verkehr" + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "Düse im Profil: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Ihr Düsendurchmesser im Profil stimmt nicht mit dem gemerkten " +#~ "Düsendurchmesser überein. Haben Sie Ihre Düse kürzlich gewechselt?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "" +#~ "*Drucken von %s Material mit %s kann zu einer Beschädigung der Düse führen" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Durch Anpassen des Abstands der Außenwand kann die Präzision der Schale " +#~ "verbessert werden. Dadurch wird auch die Schichtkonsistenz verbessert." + +#~ msgid "Enable filament ramming." +#~ msgstr "Filamentrammen aktivieren" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Mausrad" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Strg + Mausrad" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + linke Maustaste" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Umschalttaste + Mausbewegung nach oben oder unten" + +#~ msgid "Left mouse button:" +#~ msgstr "Linke Maustaste:" + +#~ msgid "Right mouse button:" +#~ msgstr "Rechte Maustaste:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Gross + linke Maustaste:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Gross + rechte Maustaste:" + +#~ msgid "Recent projects" +#~ msgstr "Letzte Projekte" + +#~ msgid "Maximum recent projects" +#~ msgstr "Höchstanzahl an letzten Projekten" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Maximale Anzahl an zuletzt geöffneten Projekten" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Umschalttaste+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Strg+Umschalt+G" + +#~ msgid "Shift+A" +#~ msgstr "Umschalt+A" + +#~ msgid "Shift+Q" +#~ msgstr "Umschalt+Q" + +#~ msgid "Shift+Tab" +#~ msgstr "Umschalt+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+beliebiger Pfeil" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Linke Maustaste" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Linke Maustaste" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Strg + beliebige Pfeiltaste" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt + Linke Maustaste" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Strg + Linke Maustaste" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Umschalt+Linke Maustaste" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Umschalt+beliebige Pfeiltaste" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Mausrad" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Mausrad" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Strg + Mausrad" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt + Mausrad" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Umschalt+Mausrad" + +#~ msgid "" +#~ "This parameter adds a rotation of sparse infill direction to each layer " +#~ "according to the specified template. The template is a comma-separated " +#~ "list of angles in degrees, e.g. '0,90'. The first angle is applied to the " +#~ "first layer, the second angle to the second layer, and so on. If there " +#~ "are more layers than angles, the angles will be repeated. Note that not " +#~ "all sparse infill patterns support rotation." +#~ msgstr "" +#~ "Dieser Parameter fügt jeder Schicht der spärlichen Füllung eine Rotation " +#~ "hinzu, um eine Kreuzstruktur zu erzeugen.Die Vorlage ist eine durch " +#~ "Kommas getrennte Liste von Winkeln in Grad, z.B. '0,90'. Der erste Winkel " +#~ "wird auf die erste Schicht angewendet, der zweite Winkel auf die zweite " +#~ "Schicht usw. Wenn es mehr Schichten als Winkel gibt, werden die Winkel " +#~ "wiederholt. Beachten Sie, dass nicht alle spärlichen Füllmuster eine " +#~ "Rotation unterstützen." + +#~ msgid "Set Position" +#~ msgstr "Position setzen" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "" +#~ "Klicken Sie mit der rechten Maustaste auf das Symbol, um das Modellobjekt " +#~ "zu reparieren" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "Das Zielobjekt enthält nur einen Teil und kann nicht geteilt werden." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Farbschema" + +#~ msgid "Percent" +#~ msgstr "Prozent" + +#~ msgid "Used filament" +#~ msgstr "Genutztes Filament" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Mehr..." + +#~ msgid "More calibrations" +#~ msgstr "Weitere Kalibrierungen" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "MicroSD-Karte" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Keine MicroSD-Karte" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD-Karte fehlerhaft" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Das Auswerfen des Geräts %s(%s) ist fehlgeschlagen." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Diese Option kann später in den Einstellungen unter 'Ladeverhalten' " +#~ "geändert werden." + +#~ msgid "Invalid number" +#~ msgstr "Ungültige Nummer" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "Düse gemerkt: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Dies ist die Betttemperatur, wenn die kalte Druckplatte installiert ist. " +#~ "Ein Wert von 0 bedeutet, dass das Filament auf der kalten Druckplatte " +#~ "SuperTack " + +#~ msgid "Ramming settings" +#~ msgstr "Ramming-Einstellungen" + +#~ msgid "Profile dependencies" +#~ msgstr "Profilabhängigkeiten" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "Das Konfigurationspaket ist mit der aktuellen APP nicht kompatibel." + +#~ msgid "Total ramming time" +#~ msgstr "Summe der Ramming-Zeit" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Summe des Ramming-Volumens" + +#~ msgid "Ramming line width" +#~ msgstr "Ramming-Linienbreite" + +#~ msgid "Ramming line spacing" +#~ msgstr "Ramming-Linienabstand" + +#~ msgid "Shift+R" +#~ msgstr "Umschalt+R" + +#~ msgid "resume" +#~ msgstr "Fortsetzen" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Klassicher Modus" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Diese Option aktivieren, um den klassischen Modus zu verwenden" + +#~ msgid "Compatible machine" +#~ msgstr "Kompatible Maschine" + +#~ msgid "Compatible machine condition" +#~ msgstr "Kompatibler Maschinenzustand" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Bedingung für kompatible Prozessprofile" + +#~ msgid "Default filament color" +#~ msgstr "Standard-Filamentfarbe" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Massives Füllmuster drehen" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Drehe das massive Füllmuster um 90° für jede Schicht." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Flusskompensationsmodell, das verwendet wird, um den Fluss für kleine " +#~ "Füllbereiche anzupassen. Das Modell wird als durch Komma getrenntes Paar " +#~ "von Werten für die Extrusionslänge und die Flusskorrekturfaktoren, eine " +#~ "pro Zeile, im folgenden Format ausgedrückt: \"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Die größte druckbare Schichthöhe für den Extruder. Wird verwendet, um die " +#~ "maximale Schichthöhe zu begrenzen, wenn die adaptive Schichthöhe " +#~ "aktiviert ist" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Die niedrigste druckbare Schichthöhe für den Extruder. Wird verwendet, um " +#~ "die minimale Schichthöhe zu begrenzen, wenn die adaptive Schichthöhe " +#~ "aktiviert ist" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Rückzug auf der obersten Schicht" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Forciert einen Rückzug auf der obersten Schicht. Das Deaktivieren könnte " +#~ "eine Verstopfung bei sehr langsamen Mustern mit kleinen Bewegungen wie " +#~ "der Hilbert-Kurve verhindern." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Menge an Material im Extruder zurückgezogen wird, um ein herauslaufen des " +#~ "Filaments bei langen Verfahrwegen zu vermeiden. Null deaktiviert dein " +#~ "Rückzug." + +#~ msgid "Speed of retractions." +#~ msgstr "Geschwindigkeit für den Rückzug" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Geschwindigkeit für das Einziehen von Filament in den Extruder nach einem " +#~ "Rückzug. Null bedeutet die gleiche Geschwindigkeit wie der Rückzug." + +#~ msgid "Single loop draft shield" +#~ msgstr "Einzelner Ring für den Luftzug-Schutz" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Begrenzt die Luftzug-Schutz-Ringe auf eine Wand nach der ersten Schicht. " +#~ "Dies ist gelegentlich nützlich, um Filament zu sparen, kann aber dazu " +#~ "führen, dass der Luftzug-Schutz verzieht oder reißt." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Abstand der Schnittstellenlinien. Null bedeutet feste Schnittstelle" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Mindestdicke für dünne Features. Modellfeatures, die dünner als dieser " +#~ "Wert sind, werden nicht gedruckt, während Features, die dicker als die " +#~ "Mindestfeaturegröße sind, auf die Mindestwandbreite verbreitert werden. " +#~ "Bezogen als Prozentsatz auf Düsendurchmesser." + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "Aktuelle Prozess-/Maschineneinstellungen laden, wenn 'Aktuell' verwendet " +#~ "wird" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "Aktuelle Filamenteinstellungen laden, wenn Aktuell verwendet wird" + +#~ msgid "Downward machines settings" +#~ msgstr "Einstellungen für abwärtskompatible Maschinen" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Lade Filament-IDs für jedes Objekt" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Wir haben jetzt die automatische Kalibrierung für verschiedene Filamente " +#~ "hinzugefügt, die vollautomatisch ist und das Ergebnis wird in den Drucker " +#~ "für die zukünftige Verwendung gespeichert. Sie müssen die Kalibrierung " +#~ "nur in den folgenden begrenzten Fällen durchführen:\n" +#~ "1. Wenn Sie ein neues Filament von verschiedenen Marken/Modellen " +#~ "einführen oder das Filament feucht ist;\n" +#~ "2. wenn die Düse abgenutzt ist oder durch eine neue ersetzt wird;\n" +#~ "3. Wenn die maximale volumetrische Geschwindigkeit oder die " +#~ "Drucktemperatur in der Filament-Einstellung geändert wird." + +#~ msgid "step: " +#~ msgstr "Schrittweite" + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "STL laden" + +#~ msgid "Load svg" +#~ msgstr "SVG laden" + +#~ msgid "Back Page 1" +#~ msgstr "Zurück Seite 1" + +#~ msgid "Delete Filament" +#~ msgstr "Filament löschen" + +#~ msgid "Refresh Printers" +#~ msgstr "Drucker aktualisieren" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine kleinere " +#~ "Schichthöhe und führt zu fast unsichtbaren Schichtlinien und einer " +#~ "höheren Druckqualität, aber einer kürzeren Druckzeit." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "Im Vergleich zum Standardprofil einer 0,2 mm Düse hat es eine kleinere " +#~ "Schichthöhe und führt zu minimalen Schichtlinien und einer höheren " +#~ "Druckqualität, aber einer kürzeren Druckzeit." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Es hat eine sehr große Schichthöhe und führt zu sehr deutlichen " +#~ "Schichtlinien, niedriger Druckqualität und allgemeiner Druckzeit." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine größere " +#~ "Schichthöhe und führt zu sehr deutlichen Schichtlinien und einer viel " +#~ "niedrigeren Druckqualität, aber einer kürzeren Druckzeit in einigen " +#~ "Druckfällen." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine viel " +#~ "größere Schichthöhe und führt zu extrem deutlichen Schichtlinien und " +#~ "einer viel niedrigeren Druckqualität, aber einer wesentlich kürzeren " +#~ "Druckzeit in einigen Druckfällen." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "Im Vergleich zum Standardprofil einer 0,8 mm Düse hat es eine kleinere " +#~ "Schichthöhe und führt zu weniger, aber immer noch deutlichen " +#~ "Schichtlinien und einer leicht höheren Druckqualität, aber einer längeren " +#~ "Druckzeit in einigen Druckfällen." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Verbindung zu Flashforge funktioniert korrekt." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Konnte keine Verbindung zu Flashforge herstellen" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Setze den Brim-Typ auf \"bemalt\"" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Wir haben einen experimentellen Stil \"Baum schmal\" hinzugefügt, der ein " +#~ "geringeres Stützvolumen benötigt, aber dafür eine geringere Stärke " +#~ "aufweist.\n" +#~ "Wir empfehlen folgende Einstellungen: 0 Oberflächenschichten, 0 oberer " +#~ "Abstand, 2 Wände." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Für die Stile \"Baumstützen Stark\" und \"Baumstützen Hybrid\" empfehlen " +#~ "wir die folgenden Einstellungen: Mindestens 2 Schnittstellschichten, " +#~ "mindestens 0,1 mm oberer Z-Abstand oder die Verwendung von " +#~ "Stützmaterialien bei der Schnittstelle." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Doppelte Wände für Ast-Durchmesser ab" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Äste mit einer Fläche, die größer ist als die Fläche eines Kreises mit " +#~ "diesem Durchmesser, werden mit doppelten Wänden für die Stabilität " +#~ "gedruckt. Setzen Sie diesen Wert auf Null, um keine doppelten Wände zu " +#~ "erhalten." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "" +#~ "Diese Einstellung gibt die Anzahl der Wände um die Stützstrukturen an" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Stützen: Werkzeugpfad auf Ebene %d erzeugen" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Stützen: Überhänge erkennen" + +#~ msgid "Support: propagate branches" +#~ msgstr "Stützen: Zweige vermehren" + +#~ msgid "Support: draw polygons" +#~ msgstr "Stützen: Polygone zeichnen" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Stützen: Werkzeugweg generieren" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Stützen: Polygone auf Ebene %d erzeugen" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Stützen: Löcher in Schicht %d repairieren" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Stützen: Verbreiten von Zweigen auf Ebene %d" + +#~ msgid "Scale all" +#~ msgstr "Alle skalieren" + +#~ msgid "Snapmaker Orca" +#~ msgstr "Snapmaker Orca" + +#~ msgid "Current Cabin humidity" +#~ msgstr "Aktuelle Kabinenfeuchtigkeit" + +#~ msgid "Stopped." +#~ msgstr "Gestoppt." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Verbindung fehlgeschlagen [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "" +#~ "Die Initialisierung ist fehlgeschlagen (Geräteverbindung nicht bereit)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Initialisierung fehlgeschlagen (Speicher nicht verfügbar, MicroSD-Karte " +#~ "einlegen.)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Initialisierung ist fehlgeschlagen (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN-Verbindung fehlgeschlagen (Senden einer Druckdatei)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Schritt 1: Vergewissern Sie sich, dass Snapmaker Orca und Ihr Drucker sich " +#~ "im selben LAN befinden." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Schritt 2: Wenn die IP und der Zugriffscode unten von den tatsächlichen " +#~ "Werten Ihres Druckers abweichen, korrigieren Sie diese bitte." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Schritt 3: Pingen Sie die IP-Adresse, um Paketverlust und Latenz zu " + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Zwangskühlung für Überhänge und Brücken" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Aktivieren Sie diese Option, um die Lüftergeschwindigkeit für Überhänge " +#~ "und Brücken zu optimieren, um eine bessere Kühlung zu erreichen" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Lüftergeschwindigkeit für Überhänge" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Erzwinge diese Lüftergeschwindigkeit beim Drucken von Brücken oder " +#~ "Wänden, die einen großen Überhang aufweisen. Erzwungene Kühlung für " +#~ "Überhänge und Brücken kann eine bessere Qualität für diese Abschnitte " +#~ "erzielen." + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Schwellenwert für die Kühlung von Überhängen" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Erzwingt eine bestimmte Lüftergeschwindigkeit, wenn der Winkel des " +#~ "Überhangs des gedruckten Teils diesen Wert überschreitet. Dies wird als " +#~ "Prozentsatz ausgedrückt, der angibt, wie groß die Breite der Linie ohne " +#~ "Unterstützung durch die untere Schicht ist. 0%% bedeutet, dass die " +#~ "Kühlung für die gesamte Außenwand erzwungen wird, unabhängig vom Winkel " +#~ "des Überhangs." + +#~ msgid "Bridge infill direction" +#~ msgstr "Brückenfüllrichtung" + +#~ msgid "Bridge density" +#~ msgstr "Brückendichte" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Die Standard-Einstellung für Density of external bridges ist 100%, was " +#~ "bedeutet, dass die Brücke als massives Material gedruckt wird. Diese " +#~ "Einstellung kann jedoch je nach Druckanforderungen und Objekt variieren " +#~ "und angepasst werden." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Verbessern Sie die Schalenpräzision, indem Sie den Abstand der äußeren " +#~ "Wand anpassen. Dies verbessert auch die Schichtkonsistenz.\n" +#~ "Hinweis: Diese Einstellung wird nur wirksam, wenn die Wandsequenz auf " +#~ "Inner-Outer konfiguriert ist." + +#~ msgid "Thick bridges" +#~ msgstr "Dicke Brücken" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "Kleine interne Brücken herausfiltern (Beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Diese Option kann dazu beitragen, das Pillowing auf den oberen " +#~ "Oberflächen in stark geneigten oder gekrümmten Modellen zu reduzieren.\n" +#~ "\n" +#~ "Standardmäßig werden kleine interne Brücken herausgefiltert und das " +#~ "interne feste Infill wird direkt über dem dünnen Infill gedruckt. Dies " +#~ "funktioniert in den meisten Fällen gut und beschleunigt den Druck, ohne " +#~ "die Qualität der oberen Oberfläche zu beeinträchtigen.\n" +#~ "\n" +#~ "In stark geneigten oder gekrümmten Modellen, insbesondere wenn eine zu " +#~ "geringe Dichte des dünnen Infill verwendet wird, kann dies jedoch zu " +#~ "einem Kräuseln des nicht unterstützten festen Infill führen, was zu " +#~ "Pillowing führt.\n" +#~ "\n" +#~ "Wenn diese Option deaktiviert ist, wird die interne Brückenschicht über " +#~ "dem leicht nicht unterstützten internen festen Infill gedruckt. Die " +#~ "folgenden Optionen steuern die Filterung, d. h. die Anzahl der erstellten " +#~ "internen Brücken.\n" +#~ "\n" +#~ "Filter - aktivieren Sie diese Option. Dies ist das Standardverhalten und " +#~ "funktioniert in den meisten Fällen gut.\n" +#~ "\n" +#~ "Begrenzte Filterung - erstellt interne Brücken auf stark geneigten " +#~ "Oberflächen, vermeidet jedoch das Erstellen unnötiger interner Brücken. " +#~ "Dies funktioniert für die meisten schwierigen Modelle gut.\n" +#~ "\n" +#~ "Keine Filterung - erstellt interne Brücken an jedem potenziellen internen " +#~ "Überhang. Diese Option ist für stark geneigte obere Oberflächenmodelle " +#~ "nützlich. In den meisten Fällen erstellt sie jedoch zu viele unnötige " +#~ "Brücken." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Diese Lüftergeschwindigkeit wird während der Stützstruktur verwendet.\n" +#~ "Setzen Sie es auf -1, um dies zu deaktivieren.\n" +#~ "Kann nur durch disable_fan_first_layers außer Kraft gesetzt werden." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "Die minimale Druckgeschwindigkeit, die der Drucker einhält, um zu " +#~ "versuchen, die minimale Schichtzeit einzuhalten, wenn die Verlangsamung " +#~ "für eine bessere Schichtkühlung aktiviert ist." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Umschalttaste + Linksklick" + +#~ msgid "Unselect" +#~ msgstr "Abwählen" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Skalieren" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Z-Höhe einhalten" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-Hop beim Rückzug" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "Anzahl der Millimeter, die der Überhang betragen muss, damit die " +#~ "Umkehrung als nützlich angesehen wird. Kann ein Prozentsatz der " +#~ "Umfangsbreite sein.\n" +#~ "Der Wert 0 aktiviert die Umkehrung auf jeder geraden Schicht." + +#~ msgid "Reverse on odd" +#~ msgstr "Umkehren bei ungeraden Schichten" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Extrudieren Sie Umfänge, die einen Überhang haben in die entgegen " +#~ "gesetzte Richtung in ungeraden Schichten. Dieses abwechselnde Muster kann " +#~ "steile Überhänge drastisch verbessern.\n" +#~ "\n" +#~ "Diese Einstellung kann auch dazu beitragen, das Verziehen von Teilen zu " +#~ "verringern, da die Spannungen in den Teilwänden reduziert werden." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Wenden Sie die Logik der umgekehrten Umfänge nur auf interne Umfänge an.\n" +#~ "\n" +#~ "Diese Einstellung reduziert die Spannungen in den Teilen erheblich, da " +#~ "sie jetzt in abwechselnden Richtungen verteilt werden. Dies sollte das " +#~ "Verziehen von Teilen reduzieren und gleichzeitig die Qualität der " +#~ "Außenwand sicherstellen. Diese Funktion kann für Materialien, die zum " +#~ "Verziehen neigen wie ABS/ASA, und auch für elastische Filamente wie TPU " +#~ "und Silk PLA sehr nützlich sein. Sie kann auch dazu beitragen, das " +#~ "Verziehen in schwebenden Bereichen über Stützstrukturen zu reduzieren.\n" +#~ "\n" +#~ "Damit diese Einstellung am effektivsten ist, wird empfohlen, den " +#~ "Umkehrschwellenwert auf 0 zu setzen, damit alle internen Wände in " +#~ "ungeraden Schichten unabhängig von ihrem Überhangsgrad in abwechselnden " +#~ "Richtungen gedruckt werden." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Anzahl der mm, die der Überhang haben muss, damit die Umkehr als nützlich " +#~ "angesehen wird. Kann ein % der Umfangsbreite sein.\n" +#~ "Wert 0 aktiviert die Umkehr in jeder ungeraden Schicht." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "Die Richtung, in der die Wand-Schleifen extrudiert werdenStandardmäßig " +#~ "werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei denn, die " +#~ "Umkehrung bei ungeraden Schichten ist aktiviert. Wenn Sie dies auf eine " +#~ "Option außer Auto setzen, wird die Wandrichtung unabhängig von der " +#~ "Umkehrung bei ungeraden Schichten erzwungen.\n" +#~ "Diese Option wird deaktiviert, wenn der Spiral-Vase-Modus aktiviert ist." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Während des Druckens mit einem Objekt kann der Extruder auf den Rand " +#~ "stoßen.\n" +#~ "Daher sollten die Skirt-Ebenen zurückgesetzt werden." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "Ein Luftzugs-Schutz ist nützlich, um einen ABS- oder ASA-Druck vor Verzug " +#~ "und Ablösen vom Druckbett aufgrund von Luftzug zu schützen. Er wird " +#~ "normalerweise nur bei offenen Druckern benötigt, d.h. ohne Gehäuse.\n" +#~ "\n" +#~ "Optionen:\n" +#~ "Aktiviert = Umrandung ist so hoch wie das höchste gedruckte Objekt.\n" +#~ "Begrenzt = Umrandung ist so hoch wie durch die Höhe der Umrandung " +#~ "angegeben.\n" +#~ "\n" +#~ "Hinweis: Mit dem aktiven Luftzug-Schutz wird die Umrandung in der " +#~ "Umrandungsdistanz vom Objekt gedruckt. Daher kann es bei aktiven Rändern " +#~ "zu Überschneidungen kommen. Um dies zu vermeiden, erhöhen Sie den Wert " +#~ "derUmrandungsdistanz.\n" + +#~ msgid "Limited" +#~ msgstr "Begrenzt" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Passen Sie diesen Wert an, um zu verhindern, dass kurze, offene Wände " +#~ "gedruckt werden, was die Druckzeit erhöhen könnte. Höhere Werte entfernen " +#~ "mehr und längere Wände.\n" +#~ "\n" +#~ "HINWEIS: Die unteren und oberen Oberflächen werden von diesem Wert nicht " +#~ "beeinflusst, um visuelle Lücken an der Außenseite des Modells zu " +#~ "vermeiden. Passen Sie die \"One wall threshold\" in den erweiterten " +#~ "Einstellungen unten an, um die Empfindlichkeit dessen anzupassen, was als " +#~ "obere Oberfläche angesehen wird. \"One wall threshold\" ist nur sichtbar, " +#~ "wenn diese Einstellung über den Standardwert von 0,5 gesetzt ist oder " +#~ "wenn einzelne Wände für die Oberfläche aktiviert sind." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "Kleine interne Brücken nicht herausfiltern (experimentell)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Diese Option kann dazu beitragen, das Polstern auf Oberflächen mit stark " +#~ "geneigten oder gekrümmten Modellen zu reduzieren.\n" +#~ "\n" +#~ "Standardmäßig werden kleine interne Brücken herausgefiltert und das " +#~ "interne massive Infill wird direkt über dem dünnen Infill gedruckt. Dies " +#~ "funktioniert in den meisten Fällen gut und beschleunigt den Druck ohne zu " +#~ "große Kompromisse bei der Qualität der Oberfläche.\n" +#~ "\n" +#~ "In stark geneigten oder gekrümmten Modellen, insbesondere bei zu geringer " +#~ "Dichte des dünnen Infill, kann dies jedoch zu einer Krümmung des " +#~ "ununterstützten massiven Infill führen, was zu Polstern führt.\n" +#~ "\n" +#~ "Wenn Sie diese Option aktivieren, wird die interne Brückenschicht über " +#~ "dem leicht ununterstützten internen massiven Infill gedruckt. Die " +#~ "folgenden Optionen steuern die Menge der Filterung, d.h. die Menge der " +#~ "erstellten internen Brücken.\n" +#~ "\n" +#~ "Deaktiviert - Deaktiviert diese Option. Dies ist das Standardverhalten " +#~ "und funktioniert in den meisten Fällen gut.\n" +#~ "\n" +#~ "Begrenzte Filterung - Erstellt interne Brücken auf stark geneigten " +#~ "Flächen, vermeidet jedoch die Erstellung von unnötigen internen Brücken. " +#~ "Dies funktioniert gut für die meisten schwierigen Modelle.\n" +#~ "\n" +#~ "Keine Filterung - Erstellt interne Brücken auf jedem potenziellen " +#~ "internen Überhang. Diese Option ist für stark geneigte Oberflächenmodelle " +#~ "nützlich. In den meisten Fällen werden jedoch zu viele unnötige Brücken " +#~ "erstellt." + +#~ msgid "Shrinkage" +#~ msgstr "Schrumpfung" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "Ihr Objekt scheint zu groß zu sein. Es wird automatisch verkleinert, um " +#~ "auf das Druckbett zu passen." + +#~ msgid "Shift+G" +#~ msgstr "Umschalt+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Schaltet die Lückenfüllung für die ausgewählten Oberflächen ein. Die " +#~ "minimale Länge der Lücke, die gefüllt wird, kann über die Option " +#~ "\"winzige Lücken herausfiltern\" unten gesteuert werden.\n" +#~ "\n" +#~ "Optionen:\n" +#~ "1. Überall: Füllt Lücken in oberen, unteren und inneren massiven " +#~ "Oberflächen aus\n" +#~ "2. Obere und untere Oberflächen: Füllt Lücken nur in oberen und unteren " +#~ "Oberflächen aus\n" +#~ "3. Nirgendwo: Deaktiviert die Lückenfüllung\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Verringern Sie diesen Wert geringfügig (z. B. 0,9), um die Materialmenge " +#~ "für die Brücke zu verringern und den Durchhang zu minimieren" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Dieser Wert bestimmt die Dicke der internen Brückenschicht. Dies ist die " +#~ "erste Schicht über der dünnen Füllung. Verringern Sie diesen Wert leicht " +#~ "(z. B. 0,9), um die Oberflächenqualität über der dünnen Füllung zu " +#~ "verbessern." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Dieser Faktor beeinflusst die Menge des Materials für die obere Füllung. " +#~ "Sie können ihn leicht verringern, um eine glatte Oberflächenbeschichtung " +#~ "zu erhalten" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Dieser Faktor beeinflusst die Menge des Materials für die untere Füllung" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Aktivieren Sie diese Option, um den Druck in Bereichen zu verlangsamen, " +#~ "in denen möglicherweise gekrümmte Umfänge vorhanden sind" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Geschwindigkeit für Brücken und vollständig überhängende Wände." + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Geschwindigkeit der internen Brücke. Wenn der Wert als Prozentsatz " +#~ "angegeben ist, wird er basierend auf der Brückengeschwindigkeit " +#~ "berechnet. Standardwert ist 150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Zeit zum Laden des neuen Filaments, beim Wechseln des Filaments. Nur für " +#~ "statistische Zwecke." + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Zeit zum Entladen des alten Filaments, beim Wechseln des Filaments. Nur " +#~ "für statistische Zwecke." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Zeit für die Drucker-Firmware (oder die Multi Material Unit 2.0), um ein " +#~ "neues Filament während eines Werkzeugwechsels zu laden (wenn der T-Code " +#~ "ausgeführt wird). Diese Zeit wird zur Gesamt-Druckzeit vom G-Code-Zeit-" +#~ "Schätzer hinzugefügt." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Zeit für die Drucker-Firmware (oder die Multi Material Unit 2.0), um ein " +#~ "Filament während eines Werkzeugwechsels zu entladen (wenn der T-Code " +#~ "ausgeführt wird). Diese Zeit wird zur Gesamt-Druckzeit vom G-Code-Zeit-" +#~ "Schätzer hinzugefügt." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "" +#~ "Filtert Lücken aus, die kleiner als der angegebene Schwellenwert sind" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Diese Option aktivieren, um die Temperatur der Druckkammer zu steuern. " +#~ "Ein M191-Befehl wird vor \"machine_start_gcode\" hinzugefügt\n" +#~ "G-Code-Befehle: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Eine höhere Druckraumtemperatur kann das Verziehen unterdrücken oder " +#~ "reduzieren und möglicherweise zu einer höheren " +#~ "Zwischenschichtbindungsfestigkeit für Hochtemperaturmaterialien wie ABS, " +#~ "ASA, PC, PA und so weiter führen. Gleichzeitig wird die Luftfiltration " +#~ "von ABS und ASA schlechter. Für PLA, PETG, TPU, PVA und andere " +#~ "Materialien mit niedriger Temperatur sollte die tatsächliche " +#~ "Druckraumtemperatur nicht hoch sein, um Verstopfungen zu vermeiden, daher " +#~ "wird 0, was für das Ausschalten steht, dringend empfohlen." + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Unterschiedliche Düsendurchmesser und unterschiedliche " +#~ "Filamentdurchmesser sind nicht zulässig, wenn der Reinigungsturm " +#~ "aktiviert ist." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "Ooze Prevention wird derzeit nicht mit dem Reinigungsturm unterstützt." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Interlock-Struktur-Tiefe eines segmentierten Bereichs. Null deaktiviert " +#~ "diese Funktion." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Reinigungsturm-Extruder" #~ msgid "Current association: " #~ msgstr "Aktuelle Zuordnung:" @@ -17207,13 +23795,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Bitte geben Sie einen gültigen Wert ein (K in 0~0.3, N in 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Wählen die verbundenen Drucker (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Wählen die verbundenen Drucker (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Druckpause" @@ -17284,12 +23865,6 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Bitte finden Sie die Ecke mit perfektem Extrusionsgrad" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " #~ "PrusaSlicer links from Printable.com" @@ -17302,7 +23877,7 @@ msgstr "" #~ "first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " #~ "push out the printed walls where it is attached to them, resulting in a " #~ "worse external surface finish. It can also cause the infill to shine " #~ "through the external surfaces of the part." @@ -17318,9 +23893,6 @@ msgstr "" #~ "kann auch dazu führen, dass die Füllung durch die äußeren Oberflächen des " #~ "Teils schimmert." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "Maximum print speed when purging" #~ msgstr "Maximale Druckgeschwindigkeit beim Reinigen" @@ -17330,7 +23902,7 @@ msgstr "" #~ "is lower, the lowest speed will be used instead.\n" #~ "Increasing this speed may affect the tower's stability, as purging can be " #~ "performed over sparse layers. Before increasing this parameter beyond the " -#~ "default of 90mm/sec, make sure your printer can reliably bridge at the " +#~ "default of 90 mm/s, make sure your printer can reliably bridge at the " #~ "increased speeds." #~ msgstr "" #~ "Die maximale Druckgeschwindigkeit beim Reinigen im Reinigungsturm. Wenn " @@ -17345,7 +23917,7 @@ msgstr "" #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca basiert auf BambuStudio von Bambulab, welches von PrusaSlicer " @@ -17443,47 +24015,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Entladen" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" -#~ "\", um automatisch Filament zu laden oder zu entladen." - -#~ msgid "MC" -#~ msgstr "MC" - -#~ msgid "MainBoard" -#~ msgstr "Mainboard" - -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- ℃" - -#~ msgid "0.5" -#~ msgstr "0,5" - -#~ msgid "0.005" -#~ msgstr "0,005" - #~ msgid "New Flow Dynamics Calibration" #~ msgstr "Neue Flussdynamik-Kalibrierung" -#~ msgid "" -#~ "The 3mf file version is in Beta and it is newer than the current " -#~ "Snapmaker Orca version." -#~ msgstr "" -#~ "Die 3mf-Dateiversion ist in Beta und neuer als die aktuelle Bambu Studio-" -#~ "Version." - #~ msgid "active" #~ msgstr "Aktiv" @@ -17525,7 +24059,7 @@ msgstr "" #~ "Kammer möglicherweise nicht genau dar." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Hinweis: Wenn während des Drucks neues Filament eingelegt wird, liest das " @@ -17542,8 +24076,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Initialisierung fehlgeschlagen (keine Kamera)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Der Drucker ist mit dem Herunterladen beschäftigt; Bitte warten Sie, bis " #~ "der Download beendet ist." @@ -17575,12 +24108,9 @@ msgstr "" #~ msgid "Load failed [%d]" #~ msgstr "Laden fehlgeschlagen [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "Die Modellinformationen konnten nicht vom Drucker abgerufen werden." -#~ msgid "Failed to parse model infomations." -#~ msgstr "Modellinformationen konnten nicht analysiert werden" - #~ msgid "Connection lost. Please retry." #~ msgstr "Verbindung verloren. Bitte versuchen Sie es erneut." @@ -17589,7 +24119,7 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -17598,7 +24128,7 @@ msgstr "" #~ "Wechsel der Profile beibehalten?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -17690,12 +24220,12 @@ msgstr "" #~ "Schalendicke deaktiviert ist." #~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " #~ "wall\n" -#~ "No - Dont use alternate extra wall" +#~ "No - Don't use alternate extra wall" #~ msgstr "" -#~ "Diese Einstellungen automatisch ändern? \n" +#~ "Diese Einstellungen automatisch ändern?\n" #~ "Ja - Vertikale Schalendicke deaktivieren und alternative zusätzliche Wand " #~ "aktivieren\n" #~ "Nein - Keine alternative zusätzliche Wand verwenden" @@ -17729,9 +24259,6 @@ msgstr "" #~ msgid "Scale per instance" #~ msgstr "Skalierung pro Instanz" -#~ msgid " " -#~ msgstr " " - #~ msgid "Text-Rotate" #~ msgstr "Text-Drehen" @@ -17744,13 +24271,6 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Konfigurationspaket aktualisiert auf " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "Durch Anpassen des Abstands der Außenwand kann die Präzision der Schale " -#~ "verbessert werden. Dadurch wird auch die Schichtkonsistenz verbessert." - #~ msgid "" #~ "The minimum printing speed for the filament when slow down for better " #~ "layer cooling is enabled, when printing overhangs and when feature speeds " @@ -17760,41 +24280,9 @@ msgstr "" #~ "Verlangsamung für eine bessere Schichtkühlung aktiviert ist, beim Drucken " #~ "von Überhängen und wenn die Funktionen nicht explizit angegeben sind." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Keine dünnen Schichten (EXPERIMENTELL)" - -#~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" -#~ msgstr "" -#~ "Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer " -#~ "@Drucker den Sie ausgewählt haben\" umbenennen. \n" -#~ "Um Voreinstellungen für mehr Drucker hinzuzufügen, gehen Sie bitte zur " -#~ "Druckerauswahl" - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "Die Konfiguration kann nicht geladen werden." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "Die 3mf wurde mit einer alten Version von Snapmaker Orca generiert, lade nur " -#~ "die Geometriedaten." - -#~ msgid "wiki" -#~ msgstr "wiki" - -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "Die relative Extrusion wird empfohlen, wenn die Option „label_objects“ " -#~ "verwendet wird. Einige Extruder funktionieren besser, wenn diese Option " -#~ "deaktiviert ist (Absolute Extrusion). Der Wipe-Turm ist nur im relativen " -#~ "Modus kompatibel. Er ist immer auf BambuLab-Druckern aktiviert" - #~ msgid "Movement:" #~ msgstr "Bewegung:" @@ -17823,17 +24311,17 @@ msgstr "" #~ msgstr "Verbinder sind außerhalb des Objekts" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Ungültiger Zustand. \n" +#~ "Ungültiger Zustand.\n" #~ "Kein Teil ist ausgewählt, was nach dem Schneiden behalten wird." #~ msgid "Recalculate" #~ msgstr "Neu berechnen" #~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " +#~ "Orca recalculates your flushing volumes every time the filament colors " #~ "change. You can change this behavior in Preferences." #~ msgstr "" #~ "Orca berechnet Ihre Reinigungsvolumen jedes Mal neu, wenn sich die " @@ -17848,7 +24336,7 @@ msgstr "" #~ "Zeitüberschreitung erhalten. Bitte überprüfen Sie, ob das Netzwerk " #~ "ordnungsgemäß funktioniert, und senden Sie den Druck erneut." -#~ msgid "The beginning of the vendor can not be a number. Please re-enter." +#~ msgid "The beginning of the vendor cannot be a number. Please re-enter." #~ msgstr "" #~ "Der Anfang des Herstellers darf keine Zahl sein. Bitte erneut eingeben." @@ -17864,9 +24352,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "SLA-Archiv auswählen:" -#~ msgid "Import file" -#~ msgstr "Datei importieren" - #~ msgid "Import model and profile" #~ msgstr "Modell und Profil importieren" @@ -17942,10 +24427,6 @@ msgstr "" #~ "Ja - Automatisches auf das geradlinige Muster wechseln\n" #~ "Nein - Dichte automatisch auf den Standardwert unter 100% zurücksetzen" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "" -#~ "Bitte heizen Sie die Düse auf über 170 Grad auf, bevor Sie Filament laden." - #, c-format, boost-format #~ msgid "This slicer file version %s is newer than %s's version:" #~ msgstr "Diese Slicer-Dateiversion %s ist neuer als die Version von %s:" @@ -17969,13 +24450,9 @@ msgstr "" #~ "Möchten Sie Ihre Software aktualisieren, um alle Funktionen in dieser " #~ "Slicer-Datei zu aktivieren?" -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "Zeige G-Code Fenster" -#, fuzzy -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "Wenn aktiviert, werden beim Start nützliche Hinweise angezeigt." - #~ msgid "" #~ "Layer height cannot exceed the limit in Printer Settings -> Extruder -> " #~ "Layer height limits" @@ -18029,8 +24506,8 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Alle Objekte als STL exportieren" -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "Der 3mf ist nicht kompatibel, lade nur die Geometriedaten!" +#~ msgid "The 3MF is not compatible, load geometry data only!" +#~ msgstr "Der 3MF ist nicht kompatibel, lade nur die Geometriedaten!" #~ msgid "Incompatible 3mf" #~ msgstr "Inkompatible 3mf" @@ -18089,164 +24566,11 @@ msgstr "" #~ msgid "%%" #~ msgstr "%%" -#~ msgid "Export 3MF" -#~ msgstr "3mf exportieren" - -#~ msgid "Export project as 3MF." -#~ msgstr "Projekt als 3mf exportieren." - -#~ msgid "Export slicing data" -#~ msgstr "Slicing-Daten exportieren" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Exportieren von Slicing-Daten in einen Ordner" - -#~ msgid "Load slicing data" -#~ msgstr "Slicing-Daten laden" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Zwischengespeicherte Slicing-Daten aus dem Verzeichnis laden" - -#~ msgid "Export STL" -#~ msgstr "Export STL" - #~ msgid "Export the objects as multiple STL." #~ msgstr "Die Objekte als mehrere STL-Dateien exportieren." -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "" -#~ "Slicen sie die Druckplatten: 0-alle Druckplatten; i-Druckplatte i; andere " -#~ "ungültig" - -#~ msgid "Show command help." -#~ msgstr "Befehlshilfe anzeigen." - -#~ msgid "UpToDate" -#~ msgstr "Auf dem neuesten Stand" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Aktualisierung der 3mf Konfigurationswerte auf die neueste Version." - -#~ msgid "Load default filaments" -#~ msgstr "Standard-Filamente laden" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Das erste Filament als Standard für nicht geladene übernehmen" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "Maximale Anzahl von Dreiecken pro Bauplattform für das Slicing." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "Das maximale Slicing-Zeitlimit pro Plate in Sekunden." - -#~ msgid "Normative check" -#~ msgstr "Normative Überprüfung" - -#~ msgid "Check the normative items." -#~ msgstr "Überprüfen Sie die normativen Elemente." - -#~ msgid "Output Model Info" -#~ msgstr "Ausgabe Modellinformationen" - -#~ msgid "Output the model's information." -#~ msgstr "Geben Sie die Informationen des Modells aus." - -#~ msgid "Export Settings" -#~ msgstr "Einstellungen exportieren" - -#~ msgid "Export settings to a file." -#~ msgstr "Einstellungen in eine Datei exportieren." - -#~ msgid "Send progress to pipe" -#~ msgstr "Fortschritt an die Leitung senden" - -#~ msgid "Send progress to pipe." -#~ msgstr "Fortschritt an die Leitung senden" - -#~ msgid "Arrange Options" -#~ msgstr "Anordnungsoptionen" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Anordnungsoptionen: 0-deaktiviert; 1-aktiviert; andere-automatisch" - -#~ msgid "Repetions count" -#~ msgstr "Anzahl der Wiederholungen" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Anzahl der Wiederholungen des gesamten Modells" - -#~ msgid "Convert Unit" -#~ msgstr "Einheit umrechnen" - -#~ msgid "Convert the units of model" -#~ msgstr "Einheiten des Modells umrechnen" - -#~ msgid "Rotate around X" -#~ msgstr "Rotieren um X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "Rotationswinkel um die X-Achse in Grad." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Skalierung des Modells um einen Faktor" - -#~ msgid "Load General Settings" -#~ msgstr "Allgemeine Einstellungen laden" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Laden von Prozess-/Maschineneinstellungen aus der angegebenen Datei" - -#~ msgid "Load Filament Settings" -#~ msgstr "Filamenteinstellungen laden" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Filamenteinstellungen aus der angegebenen Dateiliste laden" - -#~ msgid "Skip Objects" -#~ msgstr "Objekte überspringen" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Einige Objekte in diesem Druck überspringen" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "" -#~ "Aktuelle Prozess-/Maschineneinstellungen laden, wenn 'Aktuell' verwendet " -#~ "wird" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "Aktuelle Prozess-/Maschineneinstellungen aus der angegebenen Datei laden, " -#~ "wenn Aktuell verwendet wird" - -#~ msgid "Output directory" -#~ msgstr "Ausgabeverzeichnis" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Ausgabeverzeichnis für die exportierten Dateien." - -#~ msgid "Debug level" -#~ msgstr "Fehlersuchstufe" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" -#~ "warning, 3:info, 4:debug, 5:trace\n" - #, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "Die ausgewählte Voreinstellung: %1% wurde nicht gefunden." #~ msgid "" @@ -18258,33 +24582,12 @@ msgstr "" #~ "Wissen Sie, wie Sie die Ansicht und die Auswahl von Objekten/Teilen in " #~ "der 3D-Szene mit der Maus und dem Touchpad steuern können?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Modell reparieren\n" -#~ "Wussten Sie, dass Sie ein beschädigtes 3D-Modell reparieren können, um " -#~ "viele Probleme beim Slicen zu vermeiden?" - -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "Wenn mit geöffneter Druckertür gedruckt werden muss\n" -#~ "Das Öffnen der Druckertür kann die Wahrscheinlichkeit einer Verstopfung " -#~ "des Extruders/Hotends beim Drucken von Filamenten mit niedrigerer " -#~ "Temperatur bei höherer Gehäusetemperatur verringern. Weitere " -#~ "Informationen dazu finden Sie in der Wiki." - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Eingebettet" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "Die Snapmaker Orca-Konfigurationsdatei ist möglicherweise beschädigt und kann " #~ "nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es " @@ -18304,12 +24607,12 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" +#~ "automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same " #~ "brand, material type, and color)" #~ msgstr "" #~ "Derzeit sind keine identischen Ersatzverbrauchsmaterialien verfügbar, und " -#~ "eine automatische Auffüllung ist derzeit nicht möglich. \n" +#~ "eine automatische Auffüllung ist derzeit nicht möglich.\n" #~ "(Derzeit wird die automatische Versorgung mit Verbrauchsmaterialien " #~ "desselben Herstellers, Materialtyps und Farbe unterstützt)" @@ -18383,19 +24686,16 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "Kalibrierung der Extrusion" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Neues Filament in den Extruder schieben" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "Die Betttemperatur der anderen Schicht ist um mehr als %d Grad Celsius " #~ "niedriger als die Betttemperatur der ersten Schicht.\n" #~ "Dies kann dazu führen, dass sich das Modell während des Drucks von der " -#~ "Druckplatte löst" +#~ "Druckplatte löst." #~ msgid "" #~ "Bed temperature is higher than vitrification temperature of this " @@ -18441,8 +24741,8 @@ msgstr "" #~ msgstr "Hochtemperaturdruckplatte" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Dies ist die Betttemperatur, wenn die Hochtemperatur-Druckplatte " #~ "installiert ist. Ein Wert von 0 bedeutet, dass das Filament auf der " @@ -18453,10 +24753,10 @@ msgstr "" #~ msgid "" #~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " +#~ "internal bridges. These support loops could prevent internal bridges from " #~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" +#~ "when the sparse infill density is low. This value determines the " +#~ "thickness of the support loops. 0 means disable this feature" #~ msgstr "" #~ "Wenn aktiviert, werden Stützschleifen unter den Konturen interner Brücken " #~ "erzeugt. Diese Stützschleifen könnten verhindern, dass interne Brücken " @@ -18465,13 +24765,6 @@ msgstr "" #~ "bestimmt die Dicke der Stützschleifen. 0 bedeutet, diese Funktion zu " #~ "deaktivieren." -#, fuzzy, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "" -#~ "Klipper’s max_accel_to_decel wird auf % of Prozentsatz der " -#~ "Beschleunigung eingestellt" - #~ msgid "Target chamber temperature" #~ msgstr "Druckraum Temperatur" @@ -18494,20 +24787,20 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Bitte geben Sie gültige Werte ein:\n" #~ "Start > 0 Schrittweite >= 0\n" -#~ "Ende > Start + Schrittweite)" +#~ "Ende > Start + Schrittweite" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Bitte geben Sie gültige Werte ein:\n" #~ "Start > 10 Schrittweite >= 0\n" -#~ "Ende > Start + Schrittweite)" +#~ "Ende > Start + Schrittweite" #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " @@ -18524,4 +24817,4 @@ msgstr "" #~ "Bei Baumstützen führt der schlanke Stil zu einer aggressiveren " #~ "Zusammenführung der Äste und spart viel Material (Standard), während der " #~ "Hybridmodus bei großen überhängenden Flächen eine ähnliche Struktur wie " -#~ "bei normalen Stützstrukturen erzeugt." +#~ "bei normalen Stützstrukturen erzeugt." \ No newline at end of file diff --git a/localization/i18n/en/Snapmaker_Orca_en.po b/localization/i18n/en/Snapmaker_Orca_en.po index 69ef8c9a29..658d8552af 100644 --- a/localization/i18n/en/Snapmaker_Orca_en.po +++ b/localization/i18n/en/Snapmaker_Orca_en.po @@ -1,138 +1,247 @@ -# +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# 5axes <5axes@free.fr>, 2023. msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" -"Language-Team: \n" -"Language: en\n" +"Language-Team: Guislain Cyril, Thomas Lété\n" +"Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" -"X-Generator: Poedit 3.4.1\n" +"Plural-Forms: nplurals=2; plural=(n==0 || n==1) ? 0 : 1;\n" +"X-Generator: Poedit 3.6\n" -msgid "Supports Painting" -msgstr "Support Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + Mouse wheel" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "Le TPU n’est pas pris en charge par l’AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Le PVA humide deviendra flexible et restera coincé à l’intérieur de l’AMS, " +"veuillez prendre soin de le sécher avant utilisation." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Les filaments CF/GF sont durs et cassants, ils peuvent se casser ou se " +"coincer dans l’AMS, veuillez les utiliser avec prudence." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Humidité actuelle de l’AMS" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Température" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Inactif" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "N° de série:" + +msgid "Version:" +msgstr "Version :" + +msgid "Latest version" +msgstr "Dernière version" + +msgid "Support Painting" +msgstr "Peindre les supports" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Maj+" + +msgid "Mouse wheel" +msgstr "Molette de souris" msgid "Section view" -msgstr "Section view" +msgstr "Vue en coupe" msgid "Reset direction" -msgstr "Reset direction" - -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Mouse wheel" +msgstr "Réinitialiser la direction" msgid "Pen size" -msgstr "Pen size" +msgstr "Taille du crayon" msgid "Left mouse button" -msgstr "Left mouse button" +msgstr "Bouton gauche de la souris" msgid "Enforce supports" -msgstr "Enforce supports" +msgstr "Forcer les supports" msgid "Right mouse button" -msgstr "Right mouse button" +msgstr "Bouton droit de la souris" msgid "Block supports" -msgstr "Block supports" - -msgid "Shift + Left mouse button" -msgstr "Shift + Left mouse button" +msgstr "Bloquer les supports" msgid "Erase" -msgstr "Erase" +msgstr "Effacer" msgid "Erase all painting" -msgstr "Erase all painting" +msgstr "Effacer tout" msgid "Highlight overhang areas" -msgstr "Highlight overhangs" +msgstr "Mettre en surbrillance les zones en surplomb" msgid "Gap fill" -msgstr "Gap fill" +msgstr "Remplir les espaces" msgid "Perform" -msgstr "Apply" +msgstr "Exécuter" msgid "Gap area" -msgstr "Gap area" +msgstr "Aire des espaces" msgid "Tool type" -msgstr "Tool type" +msgstr "Type d'outil" msgid "Smart fill angle" -msgstr "Smart fill angle" +msgstr "Angle de remplissage intelligent" msgid "On overhangs only" -msgstr "On overhangs only" +msgstr "Sur les surplombs uniquement" msgid "Auto support threshold angle: " -msgstr "Auto support threshold angle: " +msgstr "Angle de seuil de support automatique : " msgid "Circle" -msgstr "Circle" +msgstr "Cercle" msgid "Sphere" -msgstr "Sphere" +msgstr "Sphère" msgid "Fill" -msgstr "Fill" +msgstr "Remplir" msgid "Gap Fill" -msgstr "Gap Fill" +msgstr "Remplissage des espaces" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Allows painting only on facets selected by: \"%1%\"" +msgstr "" +"Permet de peindre uniquement sur les facettes sélectionnées par : \"%1%\"" msgid "Highlight faces according to overhang angle." -msgstr "Highlight faces according to overhang angle." +msgstr "Mettre en surbrillance les faces en fonction de l'angle de surplomb." msgid "No auto support" -msgstr "No auto support" +msgstr "Pas de support auto" msgid "Support Generated" -msgstr "Support generated" +msgstr "Supports générés" msgid "Gizmo-Place on Face" -msgstr "" +msgstr "Gizmo-Placer sur la face" msgid "Lay on face" -msgstr "Lay on Face" +msgstr "Poser sur une face" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " -"the first %1% filaments will be available in painting tool." -msgstr "" "Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." +msgstr "" +"Le nombre de filaments dépasse le nombre maximum pris en charge par l'outil " +"de peinture. seuls les %1% premiers filaments seront disponibles dans " +"l'outil de peinture." msgid "Color Painting" -msgstr "Color painting" +msgstr "Mettre en couleur" msgid "Pen shape" -msgstr "Pen shape" +msgstr "Forme de crayon" msgid "Paint" -msgstr "Paint" +msgstr "Peindre" msgid "Key 1~9" -msgstr "Key 1~9" +msgstr "Touche 1 ~ 9" msgid "Choose filament" -msgstr "Choose filament" +msgstr "Choisissez le filament" msgid "Edge detection" -msgstr "Edge detection" +msgstr "Détection des contours" msgid "Triangles" msgstr "Triangles" @@ -141,31 +250,40 @@ msgid "Filaments" msgstr "Filaments" msgid "Brush" -msgstr "Brush" +msgstr "Pinceau" msgid "Smart fill" -msgstr "Smart fill" +msgstr "Remplissage intelligent" msgid "Bucket fill" -msgstr "Bucket fill" +msgstr "Pot de peinture" msgid "Height range" -msgstr "Height range" +msgstr "Plage de hauteur" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" -msgstr "Toggle Wireframe" +msgstr "Activer Maillage" + +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Annuler" msgid "Shortcut Key " -msgstr "Shortcut Key " +msgstr "Raccourci " msgid "Triangle" msgstr "Triangle" msgid "Height Range" -msgstr "Height Range" +msgstr "Plage de hauteur" msgid "Vertical" msgstr "Vertical" @@ -174,147 +292,183 @@ msgid "Horizontal" msgstr "Horizontal" msgid "Remove painted color" -msgstr "Remove painted color" +msgstr "Supprimer la couleur peinte" #, boost-format msgid "Painted using: Filament %1%" -msgstr "Painted using: Filament %1%" +msgstr "Peint avec : filament %1%" + +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Taille du pinceau" + +msgid "Brush shape" +msgstr "Forme du pinceau" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" msgid "Move" -msgstr "Move" +msgstr "Déplacer" + +msgid "Please select at least one object." +msgstr "Veuillez sélectionner au moins un objet." msgid "Gizmo-Move" -msgstr "" +msgstr "Gizmo-Déplacer" msgid "Rotate" -msgstr "Rotate" +msgstr "Pivoter" msgid "Gizmo-Rotate" -msgstr "" +msgstr "Gizmo-Pivoter" msgid "Optimize orientation" -msgstr "Optimize orientation" +msgstr "Optimiser l'orientation" msgid "Apply" -msgstr "Apply" +msgstr "Appliquer" msgid "Scale" -msgstr "Scale" +msgstr "Redimensionner" msgid "Gizmo-Scale" -msgstr "" +msgstr "Gizmo-Redimensionner" msgid "Error: Please close all toolbar menus first" -msgstr "Error: Please close all toolbar menus first" +msgstr "Erreur : Veuillez d'abord fermer tous les menus de la barre d'outils" msgid "in" -msgstr "in" +msgstr "" msgid "mm" msgstr "mm" -msgid "Position" -msgstr "Position" - -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotation" - -msgid "Scale ratios" -msgstr "Scale ratios" - -msgid "Object Operations" -msgstr "Object operations" - -msgid "Volume Operations" -msgstr "Volume operations" - -msgid "Translate" -msgstr "Translate" - -msgid "Group Operations" -msgstr "Group operations" - -msgid "Set Position" -msgstr "Set position" - -msgid "Set Orientation" -msgstr "Set orientation" - -msgid "Set Scale" -msgstr "Set scale" - -msgid "Reset Position" -msgstr "Reset position" - -msgid "Reset Rotation" -msgstr "Reset rotation" - -msgid "World coordinates" -msgstr "World coordinates" - -msgid "Object coordinates" +msgid "Part selection" msgstr "" -msgid "°" -msgstr "°" +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + +msgid "Position" +msgstr "Emplacement" + +msgid "Rotate (relative)" +msgstr "" + +msgid "Scale ratios" +msgstr "Rapports d'échelle" + +msgid "Object Operations" +msgstr "Opérations sur les objets" + +msgid "Volume Operations" +msgstr "Opérations sur les volumes" + +msgid "Translate" +msgstr "Traduire" + +msgid "Group Operations" +msgstr "Opérations de groupe" + +msgid "Set Orientation" +msgstr "Définir l'Orientation" + +msgid "Set Scale" +msgstr "Définir l'Échelle" + +msgid "Reset Position" +msgstr "Réinitialiser la position" + +msgid "Reset Rotation" +msgstr "Réinitialiser la Rotation" + +msgid "Object coordinates" +msgstr "Coordonnées de l’objet" + +msgid "World coordinates" +msgstr "Coordonnées" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" -msgstr "Size" - -msgid "%" -msgstr "%" +msgstr "Taille" msgid "uniform scale" -msgstr "Uniform scale" +msgstr "échelle uniforme" msgid "Planar" -msgstr "Planar" +msgstr "Planaire" msgid "Dovetail" -msgstr "Dovetail" +msgstr "Queue d’aronde" msgid "Auto" msgstr "Auto" msgid "Manual" -msgstr "Manual" +msgstr "Manuel" msgid "Plug" -msgstr "Plug" +msgstr "Connecteur" msgid "Dowel" -msgstr "Dowel" +msgstr "Tourillon" msgid "Snap" -msgstr "Snap" +msgstr "Encoche" msgid "Prism" -msgstr "" +msgstr "Prisme" msgid "Frustum" -msgstr "Frustum" +msgstr "Tronc" msgid "Square" -msgstr "Square" +msgstr "Carré" msgid "Hexagon" -msgstr "Hexagon" +msgstr "Hexagone" msgid "Keep orientation" -msgstr "Keep orientation" +msgstr "Conserver l’orientation" msgid "Place on cut" -msgstr "Place on cut" +msgstr "Placer sur la coupe" msgid "Flip upside down" -msgstr "" +msgstr "Retourner à l’envers" msgid "Connectors" -msgstr "Connectors" +msgstr "Connecteurs" msgid "Type" msgstr "Type" @@ -323,537 +477,545 @@ msgid "Style" msgstr "Style" msgid "Shape" -msgstr "Shape" +msgstr "Forme" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" -msgstr "Depth" +msgstr "Profondeur" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotation" msgid "Groove" -msgstr "Groove" +msgstr "Rainure" msgid "Width" -msgstr "Width" +msgstr "Largeur" msgid "Flap Angle" -msgstr "Flap Angle" +msgstr "Angle du rabat" msgid "Groove Angle" -msgstr "Groove Angle" +msgstr "Angle de la rainure" msgid "Part" -msgstr "Part" +msgstr "Pièce" msgid "Object" -msgstr "Object" +msgstr "Objet" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" +"Cliquer pour retourner le plan de coupe\n" +"Faire glisser pour déplacer le plan de coupe" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" +"Cliquer pour retourner le plan de coupe\n" +"Faire glisser pour déplacer le plan de coupe\n" +"Clic droit sur une pièce pour l’affecter à l’autre côté" msgid "Move cut plane" -msgstr "" +msgstr "Déplacer le plan de coupe" msgid "Mode" msgstr "Mode" msgid "Change cut mode" -msgstr "" +msgstr "Changer le mode de coupe" msgid "Tolerance" -msgstr "Tolerance" +msgstr "Tolérance" msgid "Drag" -msgstr "Drag" +msgstr "Glisser" msgid "Draw cut line" -msgstr "" +msgstr "Tracer la ligne de coupe" msgid "Left click" -msgstr "Left click" +msgstr "Clic gauche" msgid "Add connector" -msgstr "Add connector" +msgstr "Ajouter un connecteur" msgid "Right click" -msgstr "Right click" +msgstr "Clic droit" msgid "Remove connector" -msgstr "Remove connector" +msgstr "Retirer le connecteur" msgid "Move connector" -msgstr "Move connector" +msgstr "Déplacer le connecteur" msgid "Add connector to selection" -msgstr "Add connector to selection" +msgstr "Ajouter un connecteur à la sélection" msgid "Remove connector from selection" -msgstr "Remove connector from selection" +msgstr "Retirer le connecteur de la sélection" msgid "Select all connectors" -msgstr "Select all connectors" +msgstr "Sélectionner tous les connecteurs" msgid "Cut" -msgstr "Cut" +msgstr "Couper" msgid "Rotate cut plane" -msgstr "" +msgstr "Rotation du plan de coupe" msgid "Remove connectors" -msgstr "Remove connectors" +msgstr "Retirer les connecteurs" msgid "Bulge" -msgstr "Bulge" +msgstr "Renflement" msgid "Bulge proportion related to radius" -msgstr "" +msgstr "Proportion du renflement par rapport au rayon" msgid "Space" -msgstr "Space" +msgstr "Espace" msgid "Space proportion related to radius" -msgstr "" +msgstr "Proportion de l’espace par rapport au rayon" msgid "Confirm connectors" -msgstr "Confirm connectors" - -msgid "Cancel" -msgstr "Cancel" +msgstr "Confirmer les connecteurs" msgid "Build Volume" -msgstr "" +msgstr "Volume d’impression" msgid "Flip cut plane" -msgstr "" +msgstr "Retourner le plan de coupe" msgid "Groove change" -msgstr "" +msgstr "Modifier la rainure" msgid "Reset" -msgstr "Reset" +msgstr "Réinitialiser" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" -msgstr "" +msgstr "Modifié" msgid "Cut position" -msgstr "" +msgstr "Position de coupe" msgid "Reset cutting plane" -msgstr "" +msgstr "Réinitialisation du plan de coupe" msgid "Edit connectors" -msgstr "Edit connectors" +msgstr "Modifier les connecteurs" msgid "Add connectors" -msgstr "Add connectors" +msgstr "Ajouter des connecteurs" msgid "Reset cut" -msgstr "" +msgstr "Réinitialiser la coupe" msgid "Reset cutting plane and remove connectors" -msgstr "" +msgstr "Réinitialiser le plan de coupe et retirer les connecteurs" msgid "Upper part" -msgstr "Upper part" +msgstr "Partie supérieure" msgid "Lower part" -msgstr "Lower part" +msgstr "Partie inférieure" msgid "Keep" -msgstr "Keep" +msgstr "Conserver" msgid "Flip" -msgstr "Flip" +msgstr "Retourner" msgid "After cut" -msgstr "After cut" +msgstr "Après la coupe" msgid "Cut to parts" -msgstr "Cut to parts" +msgstr "Couper la sélection dans le presse-papiers" msgid "Perform cut" -msgstr "Perform cut" +msgstr "Effectuer la coupe" msgid "Warning" -msgstr "Warning" +msgstr "Alerte" msgid "Invalid connectors detected" -msgstr "Invalid connectors detected" +msgstr "Connecteurs invalides détectés" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "" -msgstr[1] "" +msgstr[0] "Le connecteur %1$d est hors du contour de la coupe" +msgstr[1] "Les connecteurs %1$d sont hors du contour de la coupe" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" -msgstr[0] "" -msgstr[1] "" +msgstr[0] "Le connecteur %1$d est en-dehors de l’objet" +msgstr[1] "Les connecteurs %1$d sont en-dehors de l’objet" msgid "Some connectors are overlapped" -msgstr "Some connectors are overlapped" +msgstr "Certains connecteurs se chevauchent" msgid "Select at least one object to keep after cutting." -msgstr "" +msgstr "Sélectionnez au moins un objet à conserver après la coupe." msgid "Cut plane is placed out of object" -msgstr "" +msgstr "Le plan de coupe est placé en dehors de l’objet" msgid "Cut plane with groove is invalid" -msgstr "" +msgstr "Le plan de coupe avec rainure est invalide" msgid "Connector" -msgstr "Connector" +msgstr "Connecteur" msgid "Cut by Plane" -msgstr "" +msgstr "Coupe par plan" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "Non-manifold edges be caused by cut tool: do you want to fix now?" +msgstr "" +"les bords non pliables sont dus à l’outil de coupe, voulez-vous les corriger " +"maintenant ?" msgid "Repairing model object" -msgstr "Repairing model object" +msgstr "Réparer l'objet modèle" msgid "Cut by line" -msgstr "" +msgstr "Coupe par ligne" msgid "Delete connector" -msgstr "" +msgstr "Supprimer le connecteur" msgid "Mesh name" -msgstr "Mesh name" +msgstr "Nom du maillage" msgid "Detail level" -msgstr "Detail level" +msgstr "Niveau de détail" msgid "Decimate ratio" -msgstr "Decimate ratio" +msgstr "Rapport de décimation" #, boost-format msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to simplify the model." msgstr "" -"Processing model '%1%' with more than 1M triangles could be slow. It is " -"highly recommended to simplify the model." +"Le traitement du modèle '%1%' avec plus de 1 million de triangles peut être " +"lent. Il est fortement recommandé de simplifier le modèle." msgid "Simplify model" -msgstr "Simplify model" +msgstr "Simplifier le modèle" msgid "Simplify" -msgstr "Simplify" +msgstr "Simplifier" msgid "Simplification is currently only allowed when a single part is selected" msgstr "" -"Simplification is currently only allowed when a single part is selected" +"La simplification n'est actuellement autorisée que lorsqu'une seule pièce " +"est sélectionnée" msgid "Error" -msgstr "Error" +msgstr "Erreur" msgid "Extra high" -msgstr "Extra high" +msgstr "Très haut" msgid "High" -msgstr "High" +msgstr "Élevé" msgid "Medium" -msgstr "Medium" +msgstr "Moyen" msgid "Low" -msgstr "Low" +msgstr "Faible" msgid "Extra low" -msgstr "Extra low" +msgstr "Très bas" #, c-format, boost-format msgid "%d triangles" msgstr "%d triangles" msgid "Show wireframe" -msgstr "Show wireframe" +msgstr "Afficher le maillage" -#, boost-format -msgid "%1%" -msgstr "%1%" +msgid "Can't apply when processing preview." +msgstr "Ne peut pas s'appliquer lors du processus de prévisualisation." -msgid "Can't apply when process preview." -msgstr "Unable to apply when processing preview" - -msgid "Operation already cancelling. Please wait few seconds." -msgstr "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." +msgstr "Opération déjà annulée. Veuillez patienter quelques secondes." msgid "Face recognition" -msgstr "Face recognition" +msgstr "Reconnaissance faciale" msgid "Perform Recognition" -msgstr "Perform Recognition" - -msgid "Brush size" -msgstr "Brush size" - -msgid "Brush shape" -msgstr "Brush shape" +msgstr "Effectuer la reconnaissance" msgid "Enforce seam" -msgstr "Enforce seam" +msgstr "Forcer la couture" msgid "Block seam" -msgstr "Block seam" +msgstr "Bloquer la couture" msgid "Seam painting" -msgstr "Seam painting" +msgstr "Peinture des coutures" msgid "Remove selection" -msgstr "Remove selection" +msgstr "Supprimer la sélection" msgid "Entering Seam painting" -msgstr "Entering seam painting" +msgstr "Entrée dans Peinture de Couture" msgid "Leaving Seam painting" -msgstr "Leaving Seam Painting" +msgstr "Quitter Peinture de Couture" msgid "Paint-on seam editing" -msgstr "Paint-on seam editing" +msgstr "Modification des coutures peintes" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" -msgstr "Font" +msgstr "Police" msgid "Thickness" -msgstr "Thickness" +msgstr "Épaisseur" msgid "Text Gap" -msgstr "Text Gap" +msgstr "Espacement du texte" msgid "Angle" msgstr "Angle" msgid "" -"Embeded\n" +"Embedded\n" "depth" -msgstr "Embedded depth" +msgstr "Profondeur intégrée" msgid "Input text" -msgstr "Input text" +msgstr "Texte entré" msgid "Surface" msgstr "Surface" msgid "Horizontal text" -msgstr "Horizontal text" +msgstr "Texte horizontal" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mouse move up or down" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" -msgstr "Rotate text" +msgstr "Faire pivoter le texte" msgid "Text shape" -msgstr "Text shape" +msgstr "Forme du texte" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" -msgstr "" +msgstr "Rotation du texte" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "" +msgstr "Déplacement du texte" msgid "Set Mirror" -msgstr "" +msgstr "Définir la symétrie" msgid "Embossed text" -msgstr "" +msgstr "Texte en relief" msgid "Enter emboss gizmo" -msgstr "" +msgstr "Entrer dans l’outil d’embossage" msgid "Leave emboss gizmo" -msgstr "" +msgstr "Quitter l’outil d’embossage" msgid "Embossing actions" -msgstr "" +msgstr "Actions d’embossage" msgid "Emboss" -msgstr "" +msgstr "Embosser" msgid "NORMAL" -msgstr "" +msgstr "NORMAL" msgid "SMALL" -msgstr "" +msgstr "PETIT" msgid "ITALIC" -msgstr "" +msgstr "ITALIQUE" msgid "SWISS" -msgstr "" +msgstr "SUISSE" msgid "MODERN" -msgstr "" +msgstr "MODERNE" msgid "First font" -msgstr "" +msgstr "Première police de caractères" msgid "Default font" -msgstr "" +msgstr "Police de caractères par défaut" msgid "Advanced" -msgstr "Advanced" +msgstr "Avancé" msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." msgstr "" +"Le texte ne peut pas être écrit avec la police sélectionnée. Veuillez " +"essayer de choisir une autre police." msgid "Embossed text cannot contain only white spaces." -msgstr "" +msgstr "Le texte en relief ne peut pas contenir uniquement des espaces blancs." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "" +"Le texte contient un caractère glyphe (représenté par ‘?’) inconnu de la " +"police." msgid "Text input doesn't show font skew." -msgstr "" +msgstr "La saisie de texte n’affiche pas l’inclinaison de la police." msgid "Text input doesn't show font boldness." -msgstr "" +msgstr "La saisie de texte n’affiche pas les caractères en gras." msgid "Text input doesn't show gap between lines." -msgstr "" +msgstr "La saisie de texte n’affiche pas d’espace entre les lignes." msgid "Too tall, diminished font height inside text input." -msgstr "" +msgstr "Hauteur de police trop élevée, diminuée dans la saisie de texte." msgid "Too small, enlarged font height inside text input." msgstr "" +"La hauteur de la police est trop petite et trop grande dans la saisie de " +"texte." msgid "Text doesn't show current horizontal alignment." -msgstr "" +msgstr "Le texte n’affiche pas l’alignement horizontal actuel." msgid "Revert font changes." -msgstr "" +msgstr "Annuler les modifications apportées à la police." #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "" +msgstr "La police « %1% » ne peut pas être sélectionnée." msgid "Operation" -msgstr "" +msgstr "Opération" msgid "Join" -msgstr "" +msgstr "Joindre" msgid "Click to change text into object part." -msgstr "" +msgstr "Cliquez pour transformer le texte en partie d’objet." msgid "You can't change a type of the last solid part of the object." msgstr "" +"Vous ne pouvez pas modifier le type de la dernière partie pleine de l’objet." msgctxt "EmbossOperation" msgid "Cut" -msgstr "Cut" +msgstr "Couper" msgid "Click to change part type into negative volume." -msgstr "" +msgstr "Cliquez pour changer le type de pièce en volume négatif." msgid "Modifier" -msgstr "Modifier" +msgstr "Modificateur" msgid "Click to change part type into modifier." -msgstr "" +msgstr "Cliquez pour changer le type de pièce en modificateur." msgid "Change Text Type" -msgstr "" +msgstr "Changer le type de texte" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "" +msgid "Rename style (%1%) for embossing text" +msgstr "Renommer le style (%1%) pour le texte embossé" msgid "Name can't be empty." -msgstr "" +msgstr "Le nom ne peut pas être vide." msgid "Name has to be unique." -msgstr "" +msgstr "Le nom doit être unique." msgid "OK" msgstr "OK" msgid "Rename style" -msgstr "" +msgstr "Renommer le style" msgid "Rename current style." -msgstr "" +msgstr "Renommer le style actuel." msgid "Can't rename temporary style." -msgstr "" +msgstr "Impossible de renommer un style provisoire." msgid "First Add style to list." -msgstr "" +msgstr "Ajoutez d’abord le style à la liste." #, boost-format msgid "Save %1% style" -msgstr "" +msgstr "Enregistrer le style %1%" msgid "No changes to save." -msgstr "" +msgstr "Aucune modification à enregistrer." msgid "New name of style" -msgstr "" +msgstr "Nouveau nom de style" msgid "Save as new style" -msgstr "" +msgstr "Enregistrer comme nouveau style" msgid "Only valid font can be added to style." -msgstr "" +msgstr "Seules les polices valides peuvent être ajoutées au style." msgid "Add style to my list." -msgstr "" +msgstr "Ajouter le style à ma liste." msgid "Save as new style." -msgstr "" +msgstr "Enregistrer comme nouveau style." msgid "Remove style" -msgstr "" +msgstr "Supprimer le style" msgid "Can't remove the last existing style." -msgstr "" +msgstr "Impossible de supprimer le dernier style existant." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "" +msgstr "Êtes-vous sûr de vouloir supprimer définitivement le style « %1% » ?" #, boost-format msgid "Delete \"%1%\" style." -msgstr "" +msgstr "Supprimer le style \"%1%\"." #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "" +msgstr "Impossible de supprimer \"%1%\". Il s'agit du dernier style." #, boost-format msgid "Can't delete temporary style \"%1%\"." -msgstr "" +msgstr "Impossible de supprimer le style provisoire \"%1%\"." #, boost-format msgid "Modified style \"%1%\"" -msgstr "" +msgstr "Style modifié \"%1%\"" #, boost-format msgid "Current style is \"%1%\"" -msgstr "" +msgstr "Le style actuel est \"%1%\"" #, boost-format msgid "" @@ -861,184 +1023,205 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" +"La modification du style en \"%1%\" annulera la modification du style " +"actuel.\n" +"\n" +"Voulez-vous continuer quand même ?" msgid "Not valid style." -msgstr "" +msgstr "Style non valide." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "" +"Le style \"%1%\" ne peut pas être utilisé et sera supprimé de la liste." msgid "Unset italic" -msgstr "" +msgstr "Enlever l’italique" msgid "Set italic" -msgstr "" +msgstr "Mettre en italique" msgid "Unset bold" -msgstr "" +msgstr "Enlever le gars" msgid "Set bold" -msgstr "" +msgstr "Mettre en gras" msgid "Revert text size." -msgstr "" +msgstr "Rétablir la taille du texte." msgid "Revert embossed depth." -msgstr "" +msgstr "Rétablir la profondeur de l’embossage." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" +"Les options avancées ne peuvent pas être modifiées pour la police " +"sélectionnée.\n" +"Sélectionnez une autre police." msgid "Revert using of model surface." -msgstr "" +msgstr "Rétablir l’utilisation de la surface du modèle." msgid "Revert Transformation per glyph." -msgstr "" +msgstr "Rétablir la transformation par glyphe." msgid "Set global orientation for whole text." -msgstr "" +msgstr "Définir l’orientation globale pour l’ensemble du texte." msgid "Set position and orientation per glyph." -msgstr "" +msgstr "Définir la position et l’orientation par glyphe." msgctxt "Alignment" msgid "Left" -msgstr "Left" +msgstr "Gauche" msgctxt "Alignment" msgid "Center" -msgstr "Center" +msgstr "Centrer" msgctxt "Alignment" msgid "Right" -msgstr "Right" +msgstr "Droite" msgctxt "Alignment" msgid "Top" -msgstr "Top" +msgstr "Au-dessus" msgctxt "Alignment" msgid "Middle" -msgstr "" +msgstr "Milieu" msgctxt "Alignment" msgid "Bottom" -msgstr "Bottom" +msgstr "En-dessous" msgid "Revert alignment." -msgstr "" +msgstr "Rétablir l’alignement." #. TRN EmbossGizmo: font units msgid "points" -msgstr "" +msgstr "points" msgid "Revert gap between characters" -msgstr "" +msgstr "Rétablir l’écart entre les caractères" msgid "Distance between characters" -msgstr "" +msgstr "Distance entre les caractères" msgid "Revert gap between lines" -msgstr "" +msgstr "Rétablir l’écart entre les caractères" msgid "Distance between lines" -msgstr "" +msgstr "Distance entre les lignes" msgid "Undo boldness" -msgstr "" +msgstr "Annuler la mise en gras" msgid "Tiny / Wide glyphs" -msgstr "" +msgstr "Glyphes minuscules / larges" msgid "Undo letter's skew" -msgstr "" +msgstr "Annuler l’inclinaison de la lettre" msgid "Italic strength ratio" -msgstr "" +msgstr "Ratio d’intensité de l’italique" msgid "Undo translation" -msgstr "" +msgstr "Annuler la traduction" msgid "Distance of the center of the text to the model surface." -msgstr "" +msgstr "Distance entre le centre du texte et la surface du modèle." msgid "Undo rotation" -msgstr "" +msgstr "Annuler la rotation" -msgid "Rotate text Clock-wise." -msgstr "" +msgid "Rotate text Clockwise." +msgstr "Rotation du texte dans le sens des aiguilles d’une montre." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "" +"Déverrouille la rotation du texte lorsqu’il est déplacé le long de la " +"surface de l’objet." msgid "Lock the text's rotation when moving text along the object's surface." msgstr "" +"Verrouille la rotation du texte lorsqu’il est déplacé le long de la surface " +"de l’objet." msgid "Select from True Type Collection." -msgstr "" +msgstr "Sélectionner dans la collection True Type." msgid "Set text to face camera" -msgstr "" +msgstr "Mettre le texte en face de la caméra" msgid "Orient the text towards the camera." +msgstr "Orienter le texte vers la caméra." + +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." msgstr "" +"La police « %1% » ne peut pas être utilisée. Veuillez en sélectionner une " +"autre." #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" +"Impossible de charger exactement la même police (« %1% »). L’application a " +"sélectionné une police similaire (« %2% »). Vous devez spécifier la police " +"pour permettre l’édition du texte." msgid "No symbol" -msgstr "" +msgstr "Pas de symbole" msgid "Loading" -msgstr "Loading" +msgstr "Chargement" msgid "In queue" -msgstr "" +msgstr "Dans la file d’attente" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" -msgstr "Height" +msgstr "Hauteur" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" -msgstr "" +msgstr "Utiliser la surface" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" -msgstr "" +msgstr "Par glyphe" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" -msgstr "" +msgstr "Alignement" #. TRN - Input label. Be short as possible msgid "Char gap" -msgstr "" +msgstr "Écart entre les caractères" #. TRN - Input label. Be short as possible msgid "Line gap" -msgstr "" +msgstr "Intervalle de ligne" #. TRN - Input label. Be short as possible msgid "Boldness" -msgstr "" +msgstr "Épaisseur" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" -msgstr "" +msgstr "Ratio d’inclinaison" #. TRN - Input label. Be short as possible #. Distance from model surface to be able @@ -1046,300 +1229,384 @@ msgstr "" #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" -msgstr "" +msgstr "Depuis la surface" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" -msgstr "" +msgstr "Continuer" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" -msgstr "" +msgstr "Collection" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" -msgstr "" +msgstr "Rotation du SVG" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" -msgstr "" +msgstr "Déplacement du SVG" msgid "Enter SVG gizmo" -msgstr "" +msgstr "Ouvrir l’outil SVG" msgid "Leave SVG gizmo" -msgstr "" +msgstr "Quitter l’outil SVG" msgid "SVG actions" -msgstr "" +msgstr "Actions SVG" msgid "SVG" -msgstr "" +msgstr "SVG" #, boost-format msgid "Opacity (%1%)" -msgstr "" +msgstr "Opacité (%1%)" #, boost-format msgid "Color gradient (%1%)" -msgstr "" +msgstr "Dégradé de couleurs (%1%)" msgid "Undefined fill type" -msgstr "" +msgstr "Type de remplissage non défini" msgid "Linear gradient" -msgstr "" +msgstr "Dégradé linéaire" msgid "Radial gradient" -msgstr "" +msgstr "Dégradé radial" msgid "Open filled path" -msgstr "" +msgstr "Ouvrir un chemin rempli" msgid "Undefined stroke type" -msgstr "" +msgstr "Type de trait non défini" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" +"Le chemin ne peut pas être consolidé à partir d’une auto-intersection et de " +"points multiples." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" +"La forme finale contient une auto-intersection ou plusieurs points ayant les " +"mêmes coordonnées." #, boost-format msgid "Shape is marked as invisible (%1%)." -msgstr "" +msgstr "La forme est marquée comme invisible (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" +"Le remplissage de la forme (%1%) contient un élément non pris en charge : " +"%2%." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "" +"Le trait de la forme (%1%) est trop fin (la largeur minimale est de %2% mm)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "" +"Le trait de la forme (%1%) contient un élément non pris en charge : %2%." msgid "Face the camera" -msgstr "" +msgstr "Faire face à la caméra" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" -msgstr "" +msgstr "Nom de fichier inconnu" #, boost-format msgid "SVG file path is \"%1%\"" -msgstr "" +msgstr "Le chemin d'accès au fichier SVG est \"%1%\"" msgid "Reload SVG file from disk." -msgstr "" +msgstr "Recharger le fichier SVG à partir du disque." msgid "Change file" -msgstr "" +msgstr "Changer de fichier" msgid "Change to another .svg file" -msgstr "" +msgstr "Changer pour un autre fichier .svg" msgid "Forget the file path" -msgstr "" +msgstr "Oublier le chemin d’accès au fichier" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" +"Ne PAS enregistrer le chemin d'accès local au fichier 3MF.\n" +"Désactive également l'option \"recharger à partir du disque\"." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" -msgstr "" +msgstr "Intégrer" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "" +msgstr "Intégrer dans le modèle en tant que partie non modifiable" msgid "Save as" -msgstr "" +msgstr "Enregistrer sous" msgid "Save SVG file" -msgstr "" +msgstr "Enregistrer le fichier SVG" msgid "Save as '.svg' file" -msgstr "" +msgstr "Enregistrer en tant que fichier ‘.svg’" msgid "Size in emboss direction." -msgstr "" +msgstr "Taille dans le sens de l’embossage." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "" +"L’échelle modifie également la quantité d’échantillons de la courbe (%1%)." msgid "Width of SVG." -msgstr "" +msgstr "Largeur du SVG." msgid "Height of SVG." -msgstr "" +msgstr "Hauteur du SVG." msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "" +msgstr "Verrouiller/déverrouiller le ratio d’aspect du SVG." msgid "Reset scale" -msgstr "" +msgstr "Remise à zéro de l’échelle" msgid "Distance of the center of the SVG to the model surface." -msgstr "" +msgstr "Distance entre le centre du SVG et la surface du modèle." msgid "Reset distance" -msgstr "" +msgstr "Réinitialiser la distance" msgid "Reset rotation" -msgstr "" +msgstr "Réinitialiser la rotation" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "" +"Verrouillage/déverrouillage de l’angle de rotation lorsque l’on tire au-" +"dessus de la surface." msgid "Mirror vertically" -msgstr "" +msgstr "Symétrie verticale" msgid "Mirror horizontally" -msgstr "" +msgstr "Symétrie horizontale" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" -msgstr "" +msgstr "Changer le type de SVG" #. TRN - Input label. Be short as possible msgid "Mirror" -msgstr "Mirror" +msgstr "Symétrie" msgid "Choose SVG file for emboss:" -msgstr "" +msgstr "Choisir le fichier SVG pour l’embossage :" #, boost-format msgid "File does NOT exist (%1%)." -msgstr "" +msgstr "Le fichier n’existe pas (%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "" +"Le nom de fichier doit se terminer par \".svg\" mais vous avez sélectionné " +"%1%" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." -msgstr "" +msgstr "L’analyseur Nano SVG ne peut pas charger le fichier (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "" +msgstr "Le fichier SVG ne contient PAS de chemin unique à embosser (%1%)." + +msgid "No feature" +msgstr "Aucun élément" msgid "Vertex" -msgstr "Vertex" +msgstr "Sommet" msgid "Edge" -msgstr "Edge" +msgstr "Arête" msgid "Plane" -msgstr "Plane" +msgstr "Plan" msgid "Point on edge" -msgstr "Point on edge" +msgstr "Pointer sur l’arête" msgid "Point on circle" -msgstr "Point on circle" +msgstr "Pointer sur le cercle" msgid "Point on plane" -msgstr "Point on plane" +msgstr "Pointer sur le plan" msgid "Center of edge" -msgstr "Center of edge" +msgstr "Centrer sur l’arête" msgid "Center of circle" -msgstr "Center of circle" - -msgid "ShiftLeft mouse button" -msgstr "" +msgstr "Centrer du cercle" msgid "Select feature" -msgstr "Select feature" +msgstr "Sélectionner un trait" msgid "Select point" -msgstr "Select point" +msgstr "Sélectionner un point" msgid "Delete" -msgstr "Delete" +msgstr "Supprimer" msgid "Restart selection" -msgstr "Restart selection" +msgstr "Recommencer la sélection" msgid "Esc" -msgstr "Esc" +msgstr "Échap" -msgid "Unselect" -msgstr "" +msgid "Cancel a feature until exit" +msgstr "Annuler une fonction jusqu’à ce qu’on la quitte" msgid "Measure" -msgstr "Measure" +msgstr "Mesurer" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Veuillez confirmer le rapport d’explosion = 1 et sélectionner au moins un " +"objet" msgid "Edit to scale" -msgstr "Edit to scale" +msgstr "Modifier à l’échelle" msgctxt "Verb" -msgid "Scale" -msgstr "Scale" +msgid "Scale all" +msgstr "Tout mettre à l’échelle" msgid "None" -msgstr "None" +msgstr "Aucun" msgid "Diameter" -msgstr "Diameter" +msgstr "Diamètre" msgid "Length" -msgstr "Length" +msgstr "Longueur" msgid "Selection" -msgstr "Selection" +msgstr "Sélection" + +msgid " (Moving)" +msgstr " (Déplacement)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Sélectionner 2 faces sur les objets et \n" +" faire en sorte que les objets s’assemblent." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Sélectionnez 2 points ou cercles sur des objets et \n" +" spécifier la distance qui les sépare." + +msgid "Face" +msgstr "Face" + +msgid " (Fixed)" +msgstr " (Fixé)" + +msgid "Point" +msgstr "Point" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"La fonction 1 a été réinitialisée, \n" +"la fonction 2 a été la fonction 1" + +msgid "Warning: please select Plane's feature." +msgstr "Avertissement : veuillez sélectionner la fonction du plan." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" +"Avertissement : veuillez sélectionner la fonction du Point ou du Cercle." + +msgid "Warning: please select two different meshes." +msgstr "Attention : veuillez sélectionner deux maillages différents." msgid "Copy to clipboard" -msgstr "Copy to clipboard" +msgstr "Copier dans le presse-papier" msgid "Perpendicular distance" -msgstr "Perpendicular distance" +msgstr "Distance perpendiculaire" msgid "Distance" msgstr "Distance" msgid "Direct distance" -msgstr "Direct distance" +msgstr "Distance directe" msgid "Distance XYZ" msgstr "Distance XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Parallèle" + +msgid "Center coincidence" +msgstr "Coïncidence du centre" + +msgid "Feature 1" +msgstr "Fonction 1" + +msgid "Reverse rotation" +msgstr "Inverser la rotation" + +msgid "Rotate around center:" +msgstr "Rotation autour du centre :" + +msgid "Parallel distance:" +msgstr "Distance parallèle :" + +msgid "Flip by Face 2" +msgstr "Retournement par la Face 2" msgid "Notice" -msgstr "Notice" +msgstr "Remarque" msgid "Undefined" -msgstr "Undefined" +msgstr "Non défini" #, boost-format msgid "%1% was replaced with %2%" -msgstr "%1% was replaced with %2%" +msgstr "%1% a été remplacé par %2%" msgid "The configuration may be generated by a newer version of Snapmaker Orca." msgstr "" +"La configuration peut être générée par une version plus récente de Orca " +"Slicer." msgid "Some values have been replaced. Please check them:" -msgstr "Some values have been replaced. Please check them:" +msgstr "Certaines valeurs ont été remplacées. Veuillez les vérifier :" msgid "Process" -msgstr "Process" +msgstr "Traitement" msgid "Filament" msgstr "Filament" @@ -1349,57 +1616,74 @@ msgstr "Machine" msgid "Configuration package was loaded, but some values were not recognized." msgstr "" -"The configuration package was loaded, but some values were not recognized." +"Le package de configuration a été chargé, mais certaines valeurs n'ont pas " +"été reconnues." #, boost-format msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" -"The configuration file “%1%” was loaded, but some values were not recognized." +"Le fichier de configuration \"%1%\" a été chargé, mais certaines valeurs " +"n'ont pas été reconnues." -msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " -"It will be appreciated if you report the issue to our team." +msgid "Based on PrusaSlicer and BambuStudio" msgstr "" +msgid "" +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " +"It will be appreciated if you report the issue to our team." +msgstr "" +"Snapmaker Orca va s'arrêter à cause d'un manque de mémoire. Il peut s'agir d'un " +"bogue. Il sera apprécié de signaler le problème à notre équipe." + msgid "Fatal error" -msgstr "Fatal error" +msgstr "Erreur fatale" msgid "" "Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" +"Snapmaker Orca va s'arrêter à cause d'une erreur de localisation. Il sera " +"apprécié si vous signalez le scénario spécifique dans lequel ce problème " +"s'est produit." msgid "Critical error" -msgstr "Critical error" +msgstr "Erreur critique" #, boost-format msgid "Snapmaker Orca got an unhandled exception: %1%" -msgstr "" +msgstr "Snapmaker Orca a reçu une exception non gérée : %1%" msgid "Untitled" -msgstr "Untitled" +msgstr "Sans titre" msgid "Downloading Bambu Network Plug-in" -msgstr "Downloading Bambu Network Plug-in" +msgstr "Téléchargement du plug-in Bambu Network" msgid "Login information expired. Please login again." -msgstr "Login information expired. Please login again." +msgstr "Les informations de connexion ont expiré. Veuillez vous reconnecter." msgid "Incorrect password" -msgstr "Incorrect password" +msgstr "Mot de passe incorrect" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" -msgstr "Connect %s failed! [SN:%s, code=%s]" +msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" "Snapmaker Orca requires the Microsoft WebView2 Runtime to operate certain " "features.\n" "Click Yes to install it now." msgstr "" +"Snapmaker Orca nécessite Microsoft WebView2 Runtime pour utiliser certaines " +"fonctions.\n" +"Cliquez sur Oui pour l'installer maintenant." msgid "WebView2 Runtime" +msgstr "WebView2 Runtime" + +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" msgstr "" #, c-format, boost-format @@ -1408,23 +1692,25 @@ msgid "" "Do you want to continue?" msgstr "" "%s\n" -"Do you want to continue?" +"Voulez-vous continuer ?" msgid "Remember my choice" -msgstr "Remember my choice" +msgstr "Se souvenir de mon choix" msgid "Loading configuration" -msgstr "Loading configuration" +msgstr "Chargement de la configuration" #, c-format, boost-format msgid "Click to download new version in default browser: %s" -msgstr "Click to download new version in default browser: %s" +msgstr "" +"Cliquez pour télécharger la nouvelle version dans le navigateur par défaut : " +"%s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "Snapmaker Orca needs an update" +msgstr "Snapmaker Orca a besoin d’être mis à jour" msgid "This is the newest version." -msgstr "This is the newest version." +msgstr "Il s'agit de la version la plus récente." msgid "Info" msgstr "Info" @@ -1435,519 +1721,600 @@ msgid "" "Please note, application settings will be lost, but printer profiles will " "not be affected." msgstr "" +"Le fichier de configuration d'Snapmaker Orca peut être corrompu et ne peut pas " +"être analysé.\n" +"Snapmaker Orca a tenté de recréer le fichier de configuration.\n" +"Veuillez noter que les paramètres de l'application seront perdus, mais que " +"les profils d'imprimante ne seront pas affectés." msgid "Rebuild" -msgstr "Rebuild" +msgstr "Reconstruire" msgid "Loading current presets" -msgstr "Loading current presets" +msgstr "Chargement des préréglages actuels" msgid "Loading a mode view" -msgstr "Loading a mode view" +msgstr "Chargement d'un mode de vue" msgid "Choose one file (3mf):" -msgstr "Choose one file (3mf):" +msgstr "Choisissez un fichier (3mf):" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" +"Choisissez un ou plusieurs fichiers (3mf/step/stl/svg/obj/amf/usd*/abc/ply) :" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf):" +msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/svg/obj/amf) :" msgid "Choose ZIP file" -msgstr "" +msgstr "Choisissez un fichier ZIP" msgid "Choose one file (gcode/3mf):" -msgstr "" +msgstr "Choisissez un fichier (gcode/3mf):" msgid "Some presets are modified." -msgstr "Some presets are modified." +msgstr "Certains préréglages sont modifiés." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"You can keep the modified presets for the new project, discard, or save " -"changes as new presets." +"Vous pouvez conserver les préréglages modifiés dans le nouveau projet, " +"annuler ou enregistrer les modifications en tant que nouveaux préréglages." msgid "User logged out" -msgstr "User logged out" +msgstr "Utilisateur déconnecté" msgid "new or open project file is not allowed during the slicing process!" -msgstr "new or open project file is not allowed during the slicing process!" +msgstr "" +"l’ouverture ou la création d'un fichier de projet n'est pas autorisée " +"pendant le processus de découpe !" msgid "Open Project" -msgstr "Open Project" +msgstr "Ouvrir un projet" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" -"The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"La version de Snapmaker Orca est trop ancienne et doit être mise à jour vers la " +"dernière version afin qu’il puisse être utilisé normalement" msgid "Privacy Policy Update" -msgstr "Privacy Policy Update" +msgstr "Mise à jour de la politique de confidentialité" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"The number of user presets cached in the cloud has exceeded the upper limit, " -"newly created user presets can only be used locally." +"Le nombre de préréglages utilisateur mis en cache dans le nuage a dépassé la " +"limite supérieure. Les préréglages utilisateur \n" +"nouvellement créés ne peuvent être utilisés que localement." msgid "Sync user presets" -msgstr "Sync user presets" +msgstr "Synchroniser les réglages prédéfinis de l’utilisateur" msgid "Loading user preset" -msgstr "Loading user preset" +msgstr "Chargement du préréglage utilisateur" msgid "Switching application language" -msgstr "Switching application language" +msgstr "Changer la langue de l'application" msgid "Select the language" -msgstr "Select the language" +msgstr "Sélectionner la langue" msgid "Language" -msgstr "Language" +msgstr "Langue" msgid "*" msgstr "*" msgid "The uploads are still ongoing" -msgstr "The uploads are still ongoing" +msgstr "Les téléversements sont toujours en cours" msgid "Stop them and continue anyway?" -msgstr "Stop them and continue anyway?" +msgstr "Les arrêter et continuer quand même ?" msgid "Ongoing uploads" -msgstr "Ongoing uploads" +msgstr "Téléversements en cours" msgid "Select a G-code file:" -msgstr "Select a G-code file:" +msgstr "Sélectionnez un fichier G-code :" msgid "" "Could not start URL download. Destination folder is not set. Please choose " "destination folder in Configuration Wizard." msgstr "" +"Impossible de lancer le téléchargement de l’URL. Le dossier de destination " +"n’est pas défini. Veuillez choisir le dossier de destination dans " +"l’assistant de configuration." msgid "Import File" -msgstr "Import File" +msgstr "Importer un Fichier" msgid "Choose files" -msgstr "Choose files" +msgstr "Choisir des fichiers" msgid "New Folder" -msgstr "New Folder" +msgstr "Nouveau Dossier" msgid "Open" -msgstr "Open" +msgstr "Ouvrir" msgid "Rename" -msgstr "Rename" +msgstr "Renommer" msgid "Snapmaker Orca GUI initialization failed" -msgstr "Snapmaker Orca GUI initialization failed" +msgstr "L'initialisation de l'interface de Snapmaker Orca a échoué" #, boost-format -msgid "Fatal error, exception catched: %1%" -msgstr "Fatal error, exception: %1%" +msgid "Fatal error, exception caught: %1%" +msgstr "Erreur fatale, exception interceptée : %1%" msgid "Quality" -msgstr "Quality" +msgstr "Qualité" msgid "Shell" -msgstr "Shell" +msgstr "Coque" msgid "Infill" -msgstr "Infill" +msgstr "Remplissage" msgid "Support" -msgstr "Support" +msgstr "Supports" msgid "Flush options" -msgstr "Flush options" +msgstr "Options de purge" msgid "Speed" -msgstr "Speed" +msgstr "Vitesse" msgid "Strength" -msgstr "Strength" +msgstr "Solidité" msgid "Top Solid Layers" -msgstr "Top solid layers" +msgstr "Couches pleines supérieures" msgid "Top Minimum Shell Thickness" -msgstr "Top minimum shell thickness" +msgstr "Épaisseur minimale de la coque supérieure" + +msgid "Top Surface Density" +msgstr "" msgid "Bottom Solid Layers" -msgstr "Bottom solid layers" +msgstr "Couches pleines inférieures" msgid "Bottom Minimum Shell Thickness" -msgstr "Bottom minimum shell thickness" +msgstr "Épaisseur minimale de la coque inférieure" + +msgid "Bottom Surface Density" +msgstr "" msgid "Ironing" -msgstr "Ironing" +msgstr "Lissage" msgid "Fuzzy Skin" -msgstr "Fuzzy skin" +msgstr "Surface Irrégulière" msgid "Extruders" -msgstr "Extruders" +msgstr "Extrudeurs" msgid "Extrusion Width" -msgstr "Extrusion width" +msgstr "Largeur d'Extrusion" msgid "Wipe options" -msgstr "Wipe options" +msgstr "Options d’essuyage" msgid "Bed adhesion" -msgstr "Bed adhesion" +msgstr "Adhérence au plateau" msgid "Add part" -msgstr "Add Part" +msgstr "Ajouter une pièce" msgid "Add negative part" -msgstr "Add Negative Part" +msgstr "Ajouter une partie négative" msgid "Add modifier" -msgstr "Add Modifier" +msgstr "Ajouter un modificateur" msgid "Add support blocker" -msgstr "Add Support Blocker" +msgstr "Ajouter un bloqueur de support" msgid "Add support enforcer" -msgstr "Add Support Enforcer" +msgstr "Ajouter un générateur de supports" msgid "Add text" -msgstr "" +msgstr "Ajouter un texte" msgid "Add negative text" -msgstr "" +msgstr "Ajouter un texte négatif" msgid "Add text modifier" -msgstr "" +msgstr "Ajouter un modificateur de texte" msgid "Add SVG part" -msgstr "" +msgstr "Ajouter une partie SVG" msgid "Add negative SVG" -msgstr "" +msgstr "Ajouter un SVG négatif" msgid "Add SVG modifier" -msgstr "" +msgstr "Ajouter un modificateur SVG" msgid "Select settings" -msgstr "Select settings" +msgstr "Sélectionnez les paramètres" msgid "Hide" -msgstr "Hide" +msgstr "Masquer" msgid "Show" -msgstr "Show" +msgstr "Afficher" msgid "Del" -msgstr "Del" +msgstr "Eff" msgid "Delete the selected object" -msgstr "Delete the selected object" +msgstr "Supprimer l'objet sélectionné" + +msgid "Backspace" +msgstr "" msgid "Load..." -msgstr "Load..." +msgstr "Charger…" msgid "Cube" msgstr "Cube" msgid "Cylinder" -msgstr "Cylinder" +msgstr "Cylindre" msgid "Cone" -msgstr "Cone" +msgstr "Cône" msgid "Disc" -msgstr "Disc" +msgstr "Disque" msgid "Torus" -msgstr "Torus" +msgstr "Tore" msgid "Orca Cube" -msgstr "" +msgstr "Cube Orca" + +msgid "Orca Tolerance Test" +msgstr "Test de tolérance Orca" msgid "3DBenchy" msgstr "3DBenchy" msgid "Autodesk FDM Test" -msgstr "" +msgstr "Test Autodesk FDM" msgid "Voron Cube" -msgstr "" +msgstr "Cube Voron" msgid "Stanford Bunny" -msgstr "" +msgstr "Lapin de Stanford" msgid "Orca String Hell" -msgstr "" +msgstr "Orca String Hell" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" +"Ce modèle présente un texte en relief sur la surface supérieure. Pour " +"obtenir des résultats optimaux, il est conseillé de régler le \"Seuil une " +"paroi(min_width_top_surface)\" sur 0 pour que l'option \"Une seule paroi sur " +"les surfaces supérieures\" fonctionne au mieux.\n" +"Oui - Modifier ces paramètres automatiquement\n" +"Non - Ne pas modifier ces paramètres pour moi" msgid "Text" -msgstr "" +msgstr "Texte" msgid "Height range Modifier" -msgstr "Height Range Modifier" +msgstr "Modificateur de plage de hauteur" msgid "Add settings" -msgstr "Add Settings" +msgstr "Ajouter des réglages" msgid "Change type" -msgstr "Change Type" +msgstr "Changer le type" msgid "Set as an individual object" -msgstr "Set as An Individual Object" +msgstr "Définir comme un objet individuel" msgid "Set as individual objects" -msgstr "Set as Individual Objects" +msgstr "Définir en tant qu'objets individuels" msgid "Fill bed with copies" -msgstr "Fill bed with copies" +msgstr "Remplir le plateau de copies" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "Fill the remaining area of bed with copies of the selected object" +msgstr "" +"Remplissez la zone restante du plateau avec des copies de l'objet sélectionné" msgid "Printable" -msgstr "Printable" +msgstr "Imprimable" msgid "Fix model" -msgstr "Fix Model" +msgstr "Réparer le modèle" msgid "Export as one STL" -msgstr "Export as one STL" +msgstr "Exporter en un seul STL" msgid "Export as STLs" -msgstr "Export as STLs" +msgstr "Exporter en plusieurs STL" msgid "Reload from disk" -msgstr "Reload from disk" +msgstr "Recharger à partir du disque" msgid "Reload the selected parts from disk" -msgstr "Reload the selected parts from disk" +msgstr "Recharger les pièces sélectionnées à partir du disque" msgid "Replace with STL" -msgstr "Replace with STL" +msgstr "Remplacer par le STL" msgid "Replace the selected part with new STL" -msgstr "Replace the selected part with new STL" +msgstr "Remplacer la pièce sélectionnée par un nouveau STL" + +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" msgid "Change filament" -msgstr "Change filament" +msgstr "Changer de filament" msgid "Set filament for selected items" -msgstr "Set filament for selected items" +msgstr "Définir le filament pour les éléments sélectionnés" msgid "Default" -msgstr "Default" +msgstr "Défaut" #, c-format, boost-format msgid "Filament %d" msgstr "Filament %d" msgid "current" -msgstr "current" +msgstr "courant" msgid "Scale to build volume" -msgstr "Scale to build volume" +msgstr "Adapter la taille au volume d’impression" msgid "Scale an object to fit the build volume" -msgstr "Scale an object to fit the build volume" +msgstr "Redimensionner un objet pour l'adapter au volume d’impression" msgid "Flush Options" -msgstr "Flush Options" +msgstr "Options de purge" msgid "Flush into objects' infill" -msgstr "Flush into objects' infill" +msgstr "Purger dans le remplissage d'objet" msgid "Flush into this object" -msgstr "Flush into this object" +msgstr "Purger dans cet objet" msgid "Flush into objects' support" -msgstr "Flush into objects' support" +msgstr "Purger dans les supports de l'objet" msgid "Edit in Parameter Table" -msgstr "Edit in Parameter Table" +msgstr "Modifier dans la Table des Paramètres" -msgid "Convert from inch" -msgstr "Convert from Inches" +msgid "Convert from inches" +msgstr "Convertir en pouce" -msgid "Restore to inch" -msgstr "Restore to Inch" +msgid "Restore to inches" +msgstr "Restaurer en pouces" -msgid "Convert from meter" -msgstr "Convert from Meters" +msgid "Convert from meters" +msgstr "Convertir en mètre" -msgid "Restore to meter" -msgstr "Restore to Meter" +msgid "Restore to meters" +msgstr "Restaurer au compteur" msgid "Assemble" -msgstr "Assemble" +msgstr "Assembler" msgid "Assemble the selected objects to an object with multiple parts" -msgstr "Assemble the selected objects into an object with multiple parts" +msgstr "Assembler les objets sélectionnés à un objet en plusieurs parties" msgid "Assemble the selected objects to an object with single part" -msgstr "Assemble the selected objects into an object with single part" +msgstr "Assembler les objets sélectionnés à un objet en une seule pièce" msgid "Mesh boolean" -msgstr "Mesh boolean" +msgstr "Opérations booléennes" msgid "Mesh boolean operations including union and subtraction" -msgstr "Mesh boolean operations including union and subtraction" +msgstr "" +"Opérations booléennes de maillage, incluant la fusion et la soustraction" msgid "Along X axis" -msgstr "Along X Axis" +msgstr "Le long de l'axe X" msgid "Mirror along the X axis" -msgstr "Mirror along the X Axis" +msgstr "Symétrie le long de l'axe X" msgid "Along Y axis" -msgstr "Along Y Axis" +msgstr "Le long de l'axe Y" msgid "Mirror along the Y axis" -msgstr "Mirror along the Y Axis" +msgstr "Symétrie le long de l'axe Y" msgid "Along Z axis" -msgstr "Along Z Axis" +msgstr "Le long de l'axe Z" msgid "Mirror along the Z axis" -msgstr "Mirror along the Z Axis" +msgstr "Symétrie le long de l'axe Z" msgid "Mirror object" -msgstr "Mirror object" +msgstr "Symétriser l’objet" msgid "Edit text" -msgstr "" +msgstr "Modifier le texte" msgid "Ability to change text, font, size, ..." -msgstr "" +msgstr "Possibilité de modifier le texte, la police, la taille, …" msgid "Edit SVG" -msgstr "" +msgstr "Modifier SVG" msgid "Change SVG source file, projection, size, ..." -msgstr "" +msgstr "Modifier le fichier source SVG, la projection, la taille, …" msgid "Invalidate cut info" -msgstr "Invalidate cut info" +msgstr "Invalider les informations de découpe" msgid "Add Primitive" -msgstr "Add Primitive" +msgstr "Ajouter une primitive" msgid "Add Handy models" -msgstr "" +msgstr "Ajouter des modèles pratiques" msgid "Add Models" -msgstr "Add Models" +msgstr "Ajouter des modèles" msgid "Show Labels" -msgstr "Show Labels" +msgstr "Afficher les étiquettes" msgid "To objects" -msgstr "To Objects" +msgstr "Vers les objets" msgid "Split the selected object into multiple objects" -msgstr "Split the selected object into multiple objects" +msgstr "Diviser l'objet sélectionné en plusieurs objets" msgid "To parts" -msgstr "To Parts" +msgstr "Vers les parties" msgid "Split the selected object into multiple parts" -msgstr "Split the selected object into multiple parts" +msgstr "Diviser l'objet sélectionné en plusieurs parties" msgid "Split" -msgstr "Split" +msgstr "Scinder" msgid "Split the selected object" -msgstr "Split the selected object" +msgstr "Scinder l'objet sélectionné" msgid "Auto orientation" -msgstr "Auto orientation" +msgstr "Orientation automatique" -msgid "Auto orient the object to improve print quality." -msgstr "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" +msgstr "" +"Orientez automatiquement l'objet pour améliorer la qualité d'impression." + +msgid "Edit" +msgstr "Éditer" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" msgid "Select All" -msgstr "Select All" +msgstr "Tout sélectionner" msgid "select all objects on current plate" -msgstr "Select all objects on the current plate" +msgstr "sélectionner tous les objets sur la plaque actuelle" msgid "Delete All" -msgstr "Delete All" +msgstr "Tout Supprimer" msgid "delete all objects on current plate" -msgstr "Delete all objects on the current plate" +msgstr "supprimer tous les objets sur la plaque actuelle" msgid "Arrange" -msgstr "Arrange" +msgstr "Organiser" msgid "arrange current plate" -msgstr "Arrange current plate" +msgstr "organiser la plaque actuelle" msgid "Reload All" -msgstr "" +msgstr "Tout recharger" msgid "reload all from disk" -msgstr "" +msgstr "tout recharger à partir du disque" msgid "Auto Rotate" -msgstr "Auto Rotate" +msgstr "Rotation automatique" msgid "auto rotate current plate" -msgstr "Auto rotate current plate" +msgstr "rotation automatique de la plaque actuelle" msgid "Delete Plate" -msgstr "Delete Plate" +msgstr "Supprimer le plateau" msgid "Remove the selected plate" -msgstr "Remove the selected plate" +msgstr "Supprimer la plaque sélectionnée" + +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" msgid "Clone" -msgstr "Clone" +msgstr "Cloner" msgid "Simplify Model" -msgstr "Simplify Model" +msgstr "Simplifier le Modèle" msgid "Center" -msgstr "Center" +msgstr "Centrer" + +msgid "Drop" +msgstr "Déposer" msgid "Edit Process Settings" -msgstr "Edit Process Settings" +msgstr "Modifier les paramètres du traitement" + +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" msgid "Edit print parameters for a single object" -msgstr "Edit print parameters for a single object" +msgstr "Modifier les paramètres d'impression d'un seul objet" msgid "Change Filament" -msgstr "Change Filament" +msgstr "Changer de filament" msgid "Set Filament for selected items" -msgstr "Set Filament for selected items" +msgstr "Définir le filament pour les éléments sélectionnés" msgid "Unlock" -msgstr "Unlock" +msgstr "Déverrouiller" msgid "Lock" -msgstr "Lock" +msgstr "Verrouiller" msgid "Edit Plate Name" -msgstr "Edit Plate Name" +msgstr "Modifier le nom du plateau" msgid "Name" -msgstr "Name" +msgstr "Nom" msgid "Fila." msgstr "Fila." @@ -1955,519 +2322,608 @@ msgstr "Fila." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" -msgstr[0] "%1$d error repaired" -msgstr[1] "%1$d errors repaired" +msgstr[0] "%1$d erreur réparée" +msgstr[1] "%1$d erreur réparée" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "Error: %1$d non-manifold edge." -msgstr[1] "Error: %1$d non-manifold edges." +msgstr[0] "Erreur : %1$d arête non multiple." +msgstr[1] "Erreur : %1$d arête non multiple." msgid "Remaining errors" -msgstr "Remaining errors" +msgstr "Erreurs restantes" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d non-manifold edge" -msgstr[1] "%1$d non-manifold edges" +msgstr[0] "%1$d arête non multiple" +msgstr[1] "%1$d arête non multiple" -msgid "Right click the icon to fix model object" -msgstr "Right click the icon to fix model object" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" -msgstr "Right click the icon to drop the object settings" +msgstr "" +"Cliquez avec le bouton droit sur l'icône pour supprimer les paramètres de " +"l'objet" msgid "Click the icon to reset all settings of the object" -msgstr "Click the icon to reset all settings of the object" +msgstr "Cliquez sur l'icône pour réinitialiser tous les paramètres de l'objet" msgid "Right button click the icon to drop the object printable property" -msgstr "Right click the icon to drop the object printable property" +msgstr "" +"Cliquez avec le bouton droit sur l'icône pour déposer la propriété " +"imprimable de l'objet" msgid "Click the icon to toggle printable property of the object" -msgstr "Click the icon to toggle printable properties of the object" +msgstr "Cliquez sur l'icône pour basculer la propriété imprimable de l'objet" msgid "Click the icon to edit support painting of the object" -msgstr "Click the icon to edit support painting of the object" +msgstr "Cliquez sur l'icône pour modifier la peinture de support de l'objet" msgid "Click the icon to edit color painting of the object" -msgstr "Click the icon to edit color painting for the object" +msgstr "Cliquez sur l'icône pour modifier la couleur de peinture de l'objet" msgid "Click the icon to shift this object to the bed" -msgstr "Click the icon to shift this object to the bed" +msgstr "Cliquez sur l'icône pour déplacer cet objet vers le plateau" msgid "Loading file" -msgstr "Loading file" +msgstr "Chargement du fichier" msgid "Error!" -msgstr "Error!" +msgstr "Erreur!" msgid "Failed to get the model data in the current file." -msgstr "Failed to get the model data in the current file." +msgstr "Impossible d’obtenir les données du modèle dans le fichier actuel." msgid "Generic" -msgstr "Generic" +msgstr "Générique" msgid "Add Modifier" -msgstr "Add Modifier" +msgstr "Ajouter un modificateur" msgid "Switch to per-object setting mode to edit modifier settings." -msgstr "Switch to per-object setting mode to edit modifier settings." +msgstr "" +"Basculez vers le mode de réglage par objet pour modifier les paramètres du " +"modificateur." msgid "" "Switch to per-object setting mode to edit process settings of selected " "objects." msgstr "" -"Switch to per-object setting mode to edit process settings of selected " -"objects." +"Passez en mode de réglage \"par objet\" pour modifier les paramètres de " +"traitement des objets sélectionnés." + +msgid "Remove paint-on fuzzy skin" +msgstr "" msgid "Delete connector from object which is a part of cut" -msgstr "Delete connector from object which is a part of cut" +msgstr "Supprimer le connecteur de l'objet qui fait partie de la découpe" msgid "Delete solid part from object which is a part of cut" -msgstr "Delete solid part from object which is a part of cut" +msgstr "Supprimer la partie pleine de l'objet qui est une partie découpée" msgid "Delete negative volume from object which is a part of cut" -msgstr "Delete negative volume from object which is a part of cut" +msgstr "Supprimer le volume négatif de l'objet qui fait partie de la découpe" msgid "" "To save cut correspondence you can delete all connectors from all related " "objects." msgstr "" -"To save cut correspondence you can delete all connectors from all related " -"objects." +"Pour enregistrer la correspondance coupée, vous pouvez supprimer tous les " +"connecteurs de tous les objets associés." msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." -msgstr "" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " "cut information first." +msgstr "" +"Cette action rompra une correspondance coupée.\n" +"Après cela, la cohérence du modèle ne peut être garantie.\n" +"\n" +"Pour manipuler des pièces pleines ou des volumes négatifs, vous devez " +"d'abord invalider les informations de coupe." msgid "Delete all connectors" -msgstr "Delete all connectors" +msgstr "Supprimer tous les connecteurs" msgid "Deleting the last solid part is not allowed." -msgstr "Deleting the last solid part is not allowed." +msgstr "La suppression de la dernière partie pleine n'est pas autorisée." -msgid "The target object contains only one part and can not be splited." -msgstr "The target object contains only one part and cannot be split." +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" -msgstr "Assembly" +msgstr "Assemblé" msgid "Cut Connectors information" -msgstr "Cut Connectors information" +msgstr "Informations sur les connecteurs de coupe" msgid "Object manipulation" -msgstr "Object manipulation" +msgstr "Manipulation d'objets" msgid "Group manipulation" -msgstr "Group manipulation" +msgstr "Manipulation de groupe" msgid "Object Settings to modify" -msgstr "Object Settings to Modify" +msgstr "Paramètres de l'objet à modifier" msgid "Part Settings to modify" -msgstr "Part Settings to Modify" +msgstr "Paramètres de la pièce à modifier" msgid "Layer range Settings to modify" -msgstr "Layer Range Settings to Modify" +msgstr "Paramètres de plage de couches à modifier" msgid "Part manipulation" -msgstr "Part manipulation" +msgstr "Manipulation de pièces" msgid "Instance manipulation" -msgstr "Instance manipulation" +msgstr "Manipulation d'instances" msgid "Height ranges" -msgstr "Height ranges" +msgstr "Plages de hauteur" msgid "Settings for height range" -msgstr "Settings for height range" +msgstr "Réglages de la plage de hauteur" msgid "Layer" -msgstr "Layer" +msgstr "Couche" msgid "Selection conflicts" -msgstr "Selection conflicts" +msgstr "Conflits de sélection" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" -"If the first selected item is an object, the second one should also be an " -"object." +"Si le premier élément sélectionné est un objet, le second doit également " +"être un objet." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." -msgstr "" -"If the first selected item is a part, the second one should be a part in the " +"If the first selected item is a part, the second should be a part in the " "same object." +msgstr "" +"Si le premier élément sélectionné est une partie, le second doit faire " +"partie du même objet." msgid "The type of the last solid object part is not to be changed." -msgstr "The type of the last solid object part cannot be changed." +msgstr "" +"Le type de la dernière partie pleine de l'objet ne doit pas être modifié." msgid "Negative Part" -msgstr "Negative Part" +msgstr "Partie négative" msgid "Support Blocker" -msgstr "Support Blocker" +msgstr "Bloqueur de Support" msgid "Support Enforcer" -msgstr "Support Enforcer" +msgstr "Générateur de Support" msgid "Type:" -msgstr "Type:" +msgstr "Type :" msgid "Choose part type" -msgstr "Choose part type" +msgstr "Choisissez le type de pièce" msgid "Enter new name" -msgstr "Enter new name" +msgstr "Entrer de nouveaux noms" msgid "Renaming" -msgstr "Renaming" +msgstr "Renommage" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "The following model object has been repaired" -msgstr[1] "The following model objects have been repaired" +msgstr[0] "L'objet modèle suivant a été réparé" +msgstr[1] "L'objet modèle suivant a été réparé" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "Failed to repair the following model object" -msgstr[1] "Failed to repair the following model objects" +msgstr[0] "Échec de la réparation de l'objet modèle suivant" +msgstr[1] "Échec de la réparation des objets de modèle suivants" msgid "Repairing was canceled" -msgstr "Repairing was canceled" +msgstr "La réparation a été annulée" msgid "Additional process preset" -msgstr "Additional process preset" +msgstr "Préréglage de traitement supplémentaire" msgid "Remove parameter" -msgstr "Remove parameter" +msgstr "Supprimer le paramètre" msgid "to" -msgstr "to" +msgstr "à" msgid "Remove height range" -msgstr "Remove height range" +msgstr "Supprimer la plage de hauteur" msgid "Add height range" -msgstr "Add height range" +msgstr "Ajouter une plage de hauteur" msgid "Invalid numeric." -msgstr "Invalid numeric." +msgstr "Chiffre non valide." msgid "one cell can only be copied to one or multiple cells in the same column" -msgstr "One cell can only be copied to one or more cells in the same column." +msgstr "" +"une cellule ne peut être copiée que dans une ou plusieurs cellules de la " +"même colonne" -msgid "multiple cells copy is not supported" -msgstr "Copying multiple cells is not supported." +msgid "Copying multiple cells is not supported." +msgstr "la copie de plusieurs cellules n'est pas prise en charge" msgid "Outside" -msgstr "Outside" +msgstr "Hors plaque" msgid "Layer height" -msgstr "Layer height" +msgstr "Hauteur de couche" msgid "Wall loops" -msgstr "Wall loops" +msgstr "Nombre de parois" msgid "Infill density(%)" -msgstr "Infill density(%)" +msgstr "Densité de remplissage(%)" msgid "Auto Brim" -msgstr "Auto Brim" +msgstr "Bord automatique" msgid "Mouse ear" -msgstr "" +msgstr "Sur les angles uniquement" + +msgid "Painted" +msgstr "Peint" msgid "Outer brim only" -msgstr "Outer brim only" +msgstr "Bordure extérieure uniquement" msgid "Inner brim only" -msgstr "Inner brim only" +msgstr "Bordure intérieure uniquement" msgid "Outer and inner brim" -msgstr "Outer and inner brim" +msgstr "Bordure extérieure et intérieure" msgid "No-brim" -msgstr "No-brim" +msgstr "Sans bord" msgid "Outer wall speed" -msgstr "Outer wall speed" +msgstr "Vitesse de paroi extérieure" msgid "Plate" -msgstr "Plate" +msgstr "Plaque" msgid "Brim" -msgstr "Brim" +msgstr "Bordure" msgid "Object/Part Setting" -msgstr "Object/part setting" +msgstr "Réglage objet/pièce" msgid "Reset parameter" -msgstr "Reset parameter" +msgstr "Paramètre de réinitialisation" msgid "Multicolor Print" -msgstr "Multicolor Print" +msgstr "Impression multicolore" msgid "Line Type" -msgstr "Line Type" +msgstr "Type de ligne" msgid "More" -msgstr "More" +msgstr "Plus" msgid "Open Preferences." -msgstr "Open Preferences" +msgstr "Ouvrir les Préférences." msgid "Open next tip." -msgstr "Open next tip" +msgstr "Ouvrir le conseil suivant." msgid "Open Documentation in web browser." -msgstr "Open documentation in web browser" +msgstr "Ouvrir la documentation dans un navigateur Web." msgid "Color" -msgstr "Color" +msgstr "Couleur" msgid "Pause" msgstr "Pause" msgid "Template" -msgstr "Template" +msgstr "Modèle" msgid "Custom" -msgstr "Custom" +msgstr "Personnalisé" msgid "Pause:" msgstr "Pause:" msgid "Custom Template:" -msgstr "Custom Template:" +msgstr "Modèle personnalisé :" msgid "Custom G-code:" -msgstr "Custom G-code:" +msgstr "G-code personnalisé:" msgid "Custom G-code" -msgstr "Custom G-code" +msgstr "G-code personnalisé" msgid "Enter Custom G-code used on current layer:" -msgstr "Enter Custom G-code used on current layer:" +msgstr "Entrez le G-code personnalisé a utiliser sur la couche actuelle :" msgid "Jump to Layer" -msgstr "Jump to layer" +msgstr "Aller à la couche" msgid "Please enter the layer number" -msgstr "Please enter the layer number." +msgstr "Veuillez entrer le numéro de la couche" msgid "Add Pause" -msgstr "Add Pause" +msgstr "Ajouter une Pause" msgid "Insert a pause command at the beginning of this layer." -msgstr "Insert a pause command at the beginning of this layer." +msgstr "Insérez une commande de pause au début de cette couche." msgid "Add Custom G-code" -msgstr "Add Custom G-code" +msgstr "Ajouter un G-code personnalisé" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Insert custom G-code at the beginning of this layer." +msgstr "Insérez un G-code personnalisé au début de cette couche." msgid "Add Custom Template" -msgstr "Add Custom Template" +msgstr "Ajouter un Modèle Personnalisé" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "Insert template custom G-code at the beginning of this layer." +msgstr "Insérer un G-code personnalisé au début de cette couche." msgid "Filament " msgstr "Filament " msgid "Change filament at the beginning of this layer." -msgstr "Change filament at the beginning of this layer." +msgstr "Changez le filament au début de cette couche." msgid "Delete Pause" -msgstr "Delete Pause" +msgstr "Supprimer la pause" msgid "Delete Custom Template" -msgstr "Delete Custom Template" +msgstr "Supprimer le modèle personnalisé" msgid "Edit Custom G-code" -msgstr "Edit Custom G-code" +msgstr "Modifier le G-code personnalisé" msgid "Delete Custom G-code" -msgstr "Delete Custom G-code" +msgstr "Supprimer le G-code personnalisé" msgid "Delete Filament Change" -msgstr "Delete Filament Change" +msgstr "Supprimer le changement de filament" msgid "No printer" -msgstr "No printer" +msgstr "Pas d'imprimante" msgid "..." -msgstr "..." +msgstr "…" msgid "Failed to connect to the server" -msgstr "Failed to connect to the server" +msgstr "Impossible de se connecter au serveur" msgid "Check the status of current system services" -msgstr "Check the status of current system services" +msgstr "Vérifiez l'état des services système actuels" msgid "code" msgstr "code" msgid "Failed to connect to cloud service" -msgstr "Failed to connect to cloud service" +msgstr "Impossible de se connecter au service cloud" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Please click on the hyperlink above to view the cloud service status" +msgstr "Cliquez sur l'hyperlien ci-dessus pour voir l'état du service cloud" msgid "Failed to connect to the printer" -msgstr "Failed to connect to the printer" +msgstr "Échec de la connexion à l'imprimante" msgid "Connection to printer failed" -msgstr "Connection to printer failed" +msgstr "La connexion à l'imprimante a échoué" msgid "Please check the network connection of the printer and Orca." -msgstr "Please check the network connection of the printer and Orca." +msgstr "Vérifiez la connexion réseau entre l'imprimante et Studio." msgid "Connecting..." -msgstr "Connecting..." +msgstr "Connexion…" -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Empty" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Refill" - -msgid "AMS not connected" -msgstr "AMS not connected" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "Charger" msgid "Unload" -msgstr "Unload" - -msgid "Ext Spool" -msgstr "Ext Spool" - -msgid "Tips" -msgstr "Tips" - -msgid "Guide" -msgstr "Guide" - -msgid "Retry" -msgstr "Retry" - -msgid "Calibrating AMS..." -msgstr "Calibrating AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "A problem occurred during calibration. Click to view the solution." - -msgid "Calibrate again" -msgstr "Calibrate again" - -msgid "Cancel calibration" -msgstr "Cancel calibration" - -msgid "Idling..." -msgstr "Idling..." - -msgid "Heat the nozzle" -msgstr "Heat the nozzle" - -msgid "Cut filament" -msgstr "Cut filament" - -msgid "Pull back current filament" -msgstr "Pull back the current filament" - -msgid "Push new filament into extruder" -msgstr "Push new filament into extruder" - -msgid "Purge old filament" -msgstr "Purge old filament" - -msgid "Feed Filament" -msgstr "Feed Filament" - -msgid "Confirm extruded" -msgstr "Confirm extruded" - -msgid "Check filament location" -msgstr "Check filament location" - -msgid "Grab new filament" -msgstr "Grab new filament" +msgstr "Décharger" msgid "" "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " "load or unload filaments." msgstr "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filament." - -msgid "Edit" -msgstr "Edit" +"Choisissez un emplacement AMS puis appuyez sur le bouton «  Charger «  ou «  " +"Décharger «  pour charger ou décharger automatiquement les filaments." msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." msgstr "" + +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtrer" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Refroidissement" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Haut" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "Mise en veille…" + +msgid "Heat the nozzle" +msgstr "Chauffer la buse" + +msgid "Cut filament" +msgstr "Filament coupé" + +msgid "Pull back current filament" +msgstr "Retirer le filament actuel" + +msgid "Push new filament into extruder" +msgstr "Poussez le nouveau filament dans l'extrudeur" + +msgid "Grab new filament" +msgstr "Saisir un nouveau filament" + +msgid "Purge old filament" +msgstr "Purger l'ancien filament" + +msgid "Confirm extruded" +msgstr "Confirmation de l'extrusion" + +msgid "Check filament location" +msgstr "Vérification de la position du filament" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." +msgstr "" +"Tous les objets sélectionnés sont sur la plaque verrouillée,\n" +"nous ne pouvons pas faire d'auto-arrangement sur ces objets." -msgid "No arrangable objects are selected." -msgstr "No arrangable objects are selected." +msgid "No arrangeable objects are selected." +msgstr "Aucun objet réorganisable n'est sélectionné." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." -msgstr "" "This plate is locked.\n" -"We cannot auto-arrange this plate." +"Cannot auto-arrange on this plate." +msgstr "" +"Cette plaque est verrouillée,\n" +"nous ne pouvons pas faire d'auto-arrangement sur cette plaque." msgid "Arranging..." -msgstr "Arranging..." +msgstr "Organiser…" msgid "Arranging" -msgstr "Arranging" +msgstr "Agencement" msgid "Arranging canceled." -msgstr "Arranging canceled." +msgstr "Agencement annulé." msgid "" "Arranging is done but there are unpacked items. Reduce spacing and try again." msgstr "" -"Arranging complete, but some items were not able to be arranged. Reduce " -"spacing and try again." +"L'arrangement est fait mais il y a des articles non emballés. Réduisez " +"l'espacement et réessayez." msgid "Arranging done." -msgstr "Arranging done." +msgstr "Agencement terminé." msgid "" "Arrange failed. Found some exceptions when processing object geometries." msgstr "" -"Arrange failed. Found some exceptions when processing object geometries." +"Échec de l'arrangement. Trouvé quelques exceptions lors du traitement des " +"géométries d'objets." #, c-format, boost-format msgid "" @@ -2475,275 +2931,312 @@ msgid "" "bed:\n" "%s" msgstr "" -"Arrangement ignored the following objects which can't fit into a single " -"bed:\n" +"L'agencement a ignoré les objets suivants qui ne peuvent pas tenir dans un " +"seul plateau :\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" -"All the selected objects are on a locked plate,\n" -"We cannot auto-orient these objects." +"Tous les objets sélectionnés sont sur la plaque verrouillée,\n" +"on ne peut pas faire d'auto-orientation sur ces objets." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." -msgstr "" "This plate is locked.\n" -"We cannot auto-orient this plate." +"Cannot auto-orient on this plate." +msgstr "" +"Cette plaque est verrouillée, on ne peut pas faire d'auto-orientation sur " +"cette plaque." msgid "Orienting..." -msgstr "Orienting..." +msgstr "Orienter…" msgid "Orienting" -msgstr "Orienting" +msgstr "Orienter" msgid "Orienting canceled." -msgstr "" +msgstr "Orientation annulée." msgid "Filling" -msgstr "Filling" +msgstr "Remplissage" msgid "Bed filling canceled." -msgstr "Bed filling canceled." +msgstr "Remplissage de plateau annulé." msgid "Bed filling done." -msgstr "Bed filling done." +msgstr "Remplissage du plateau fait." msgid "Searching for optimal orientation" -msgstr "" +msgstr "Recherche d'une orientation optimale" msgid "Orientation search canceled." -msgstr "" +msgstr "Recherche d'orientation annulée." msgid "Orientation found." -msgstr "" +msgstr "Orientation trouvée." msgid "Logging in" -msgstr "Logging in" +msgstr "Connexion en cours" msgid "Login failed" -msgstr "Login failed" +msgstr "Échec d'identification" msgid "Please check the printer network connection." -msgstr "Please check the printer network connection." +msgstr "Vérifiez la connexion réseau de l'imprimante." msgid "Abnormal print file data. Please slice again." -msgstr "Abnormal print file data: please slice again." +msgstr "" +"Données de fichier d'impression anormales, veuillez redécouvre le fichier." msgid "Task canceled." -msgstr "Task canceled." +msgstr "Tâche annulée." msgid "Upload task timed out. Please check the network status and try again." -msgstr "Upload task timed out. Please check the network status and try again." +msgstr "" +"Le délai de téléversement de la tâche a expiré. Vérifiez l'état du réseau et " +"réessayez." msgid "Cloud service connection failed. Please try again." -msgstr "Cloud service connection failed. Please try again." +msgstr "La connexion au service cloud a échoué. Veuillez réessayer." -msgid "Print file not found. please slice again." -msgstr "Print file not found; please slice again." +msgid "Print file not found. Please slice again." +msgstr "Fichier d'impression introuvable, veuillez le redécouvre." msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." +"Le fichier d'impression dépasse la taille maximale autorisée (1 Go). " +"Veuillez simplifier le modèle puis le redécouvre." msgid "Failed to send the print job. Please try again." -msgstr "Failed to send the print job. Please try again." +msgstr "L'envoi de la tâche d'impression a échoué. Veuillez réessayer." msgid "Failed to upload file to ftp. Please try again." -msgstr "Failed to upload file to ftp. Please try again." +msgstr "Échec du téléversement du fichier vers le ftp. Veuillez réessayer." msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Check the current status of the Bambu Lab server by clicking on the link " -"above." +"Vérifiez l'état actuel du serveur Bambu Lab en cliquant sur le lien ci-" +"dessus." msgid "" "The size of the print file is too large. Please adjust the file size and try " "again." msgstr "" -"The size of the print file is too large. Please adjust the file size and try " -"again." +"La taille du fichier d'impression est trop importante. Ajustez la taille du " +"fichier et réessayez." -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "Print file not found; please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." +msgstr "" +"Fichier d'impression introuvable, redécoupez-le et renvoyez-le pour " +"impression." msgid "" "Failed to upload print file to FTP. Please check the network status and try " "again." msgstr "" -"Failed to upload print file via FTP. Please check the network status and try " -"again." +"Impossible de charger le fichier d'impression via FTP. Vérifiez l'état du " +"réseau et réessayez." msgid "Sending print job over LAN" -msgstr "Sending print job over LAN" +msgstr "Envoi de la tâche d'impression sur le réseau local" msgid "Sending print job through cloud service" -msgstr "Sending print job through cloud service" +msgstr "Envoi de la tâche d'impression via le service cloud" msgid "Print task sending times out." -msgstr "Print task sending times out." +msgstr "L'envoi de la tâche d'impression est interrompu." msgid "Service Unavailable" -msgstr "Service Unavailable" +msgstr "Service Indisponible" msgid "Unknown Error." -msgstr "Unknown Error." +msgstr "Erreur inconnue." msgid "Sending print configuration" -msgstr "Sending print configuration" +msgstr "Envoi de la configuration d'impression" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" -msgstr "Successfully sent. Will automatically jump to the device page in %ss" +msgstr "" +"Envoyé avec succès. Basculement automatique vers la page Appareil dans %ss" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" -msgstr "Successfully sent. Will automatically jump to the next page in %ss" +msgstr "Envoyée avec succès. Bascule automatique sur la page suivante dans %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "A MicroSD card needs to be inserted before printing via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" -msgstr "Sending G-code file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "Sending G-code file to MicroSD card" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "Envoi d'un fichier G-code via le réseau local" + +msgid "Sending G-code file to SD card" +msgstr "Envoi du fichier G-code sur la carte SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" -msgstr "Successfully sent. Close current page in %s s" +msgstr "Envoyé avec succès. Fermeture de la page actuelle dans %ss" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "A MicroSD card needs to be inserted before sending to printer." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" -msgstr "Importing SLA archive" +msgstr "Importation d'une archive SLA" msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer presets first before importing that SLA archive." +"L'archive SLA ne contient aucun préréglage. Veuillez d'abord activer " +"certains préréglages d'imprimante SLA avant d'importer cette archive SLA." msgid "Importing canceled." -msgstr "Importing canceled." +msgstr "Importation annulée." msgid "Importing done." -msgstr "Importing done." +msgstr "Importation terminée." msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." +"L'archive SLA importée ne contenait aucun préréglage. Les préréglages SLA " +"actuels ont été utilisés comme solution de secours." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "You cannot load an SLA project with a multi-part object on the bed" +msgstr "" +"Vous ne pouvez pas charger un projet SLA avec un objet en plusieurs parties " +"sur le plateau" msgid "Please check your object list before preset changing." -msgstr "Please check your object list before preset changing." +msgstr "Vérifiez votre liste d'objets avant de modifier le préréglage." msgid "Attention!" -msgstr "Attention!" +msgstr "Attention !" msgid "Downloading" -msgstr "Downloading" +msgstr "Téléchargement" msgid "Download failed" -msgstr "Download failed" +msgstr "Échec du téléchargement" -msgid "Cancelled" -msgstr "Canceled" +msgid "Canceled" +msgstr "Annulé" -msgid "Install successfully." -msgstr "Installed successfully" +msgid "Installed successfully" +msgstr "Installé avec succès." msgid "Installing" -msgstr "Installing" +msgstr "Installation" msgid "Install failed" -msgstr "Install failed" +msgstr "Échec de l'installation" msgid "Portions copyright" -msgstr "License Info" +msgstr "Copyright des sections" msgid "Copyright" -msgstr "Copyright" +msgstr "Droits d'auteur" msgid "License" -msgstr "License" +msgstr "Longueur" msgid "Snapmaker Orca is licensed under " -msgstr "Snapmaker Orca is licensed under " +msgstr "Snapmaker Orca est sous licence " msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, version 3" +msgstr "GNU Affero Licence Publique Générale, version 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca est basé sur PrusaSlicer et BambuStudio" msgid "Libraries" -msgstr "Libraries" +msgstr "Bibliothèques" msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"This software uses open source components whose copyright and other " -"proprietary rights belong to their respective owners" +"Ce logiciel utilise des composants open source dont les droits d'auteur et " +"autres droits de propriété appartiennent à leurs propriétaires respectifs" #, c-format, boost-format msgid "About %s" -msgstr "About %s" - -msgid "Snapmaker Orca " -msgstr "" +msgstr "À propos de %s" msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "" +msgstr "Snapmaker Orca est basé sur BambuStudio, PrusaSlicer, et SuperSlicer." msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "" +msgstr "Bambu Studio est basé sur PrusaSlicer de PrusaResearch." msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." -msgstr "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." +msgstr "PrusaSlicer est initialement basé sur Slic3r d'Alessandro Ranellucci." msgid "" "Slic3r was created by Alessandro Ranellucci with the help of many other " "contributors." msgstr "" -"Slic3r was created by Alessandro Ranellucci with the help of many other " -"contributors." +"Slic3r a été créé par Alessandro Ranellucci avec l'aide de nombreux autres " +"contributeurs." msgid "Version" msgstr "Version" msgid "AMS Materials Setting" -msgstr "AMS Materials Setting" +msgstr "Réglage des matériaux AMS" msgid "Confirm" -msgstr "Confirm" +msgstr "Confirmer" msgid "Close" -msgstr "Close" - -msgid "Colour" -msgstr "Color" +msgstr "Fermer" msgid "" "Nozzle\n" "Temperature" -msgstr "" -"Nozzle\n" -"Temperature" +msgstr "Température de la buse" msgid "max" msgstr "max" @@ -2753,303 +3246,390 @@ msgstr "min" #, boost-format msgid "The input value should be greater than %1% and less than %2%" -msgstr "The input value should be greater than %1% and less than %2%" +msgstr "La valeur saisie doit être supérieure à %1% et inférieure à %2%" msgid "SN" -msgstr "SN" - -msgid "Setting AMS slot information while printing is not supported" -msgstr "Setting AMS slot information while printing is not supported" +msgstr "Numéro de série" msgid "Factors of Flow Dynamics Calibration" -msgstr "Factors of Flow Dynamics Calibration" +msgstr "Facteurs de calibration dynamique du débit" msgid "PA Profile" -msgstr "PA Profile" +msgstr "Profil PA" msgid "Factor K" -msgstr "Factor K" +msgstr "Facteur K" msgid "Factor N" -msgstr "Factor N" +msgstr "Facteur N" + +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"La définition des informations relatives aux emplacements AMS pendant " +"l'impression n'est pas prise en charge" msgid "Setting Virtual slot information while printing is not supported" -msgstr "Setting Virtual slot information while printing is not supported" +msgstr "" +"Le réglage des informations relatives à l'emplacement virtuel pendant " +"l'impression n'est pas pris en charge" msgid "Are you sure you want to clear the filament information?" -msgstr "Are you sure you want to clear the filament information?" +msgstr "Êtes-vous sûr de vouloir effacer les informations du filament ?" msgid "You need to select the material type and color first." -msgstr "You need to select the material type and color first." +msgstr "Vous devez d'abord sélectionner le type de matériau et sa couleur." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "" +msgstr "Veuillez saisir une valeur valide (K entre %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +"Veuillez saisir une valeur valide (K entre %.1f~%.1f, N entre %.1f~%.1f)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" msgid "Other Color" -msgstr "Other Color" +msgstr "Autre couleur" msgid "Custom Color" -msgstr "Custom Color" +msgstr "Couleur perso" msgid "Dynamic flow calibration" -msgstr "Dynamic flow calibration" +msgstr "Calibrage dynamique du débit" msgid "" "The nozzle temp and max volumetric speed will affect the calibration " "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"The nozzle temp and max volumetric speed will affect the calibration " -"results. Please fill in the same values as the actual printing. They can be " -"auto-filled by selecting a filament preset." +"La température de la buse et la vitesse volumétrique maximale affecteront " +"les résultats de la calibration. Veuillez saisir les mêmes valeurs que lors " +"de l'impression réelle. Ils peuvent être remplis automatiquement en " +"sélectionnant un préréglage de filament." msgid "Nozzle Diameter" -msgstr "Nozzle Diameter" +msgstr "Diamètre de la Buse" msgid "Bed Type" -msgstr "Plate Type" +msgstr "Type de plaque" msgid "Nozzle temperature" -msgstr "Nozzle temperature" +msgstr "Température de la buse" msgid "Bed Temperature" -msgstr "Bed Temperature" +msgstr "Température du plateau" msgid "Max volumetric speed" -msgstr "Max volumetric speed" - -msgid "℃" -msgstr "" +msgstr "Vitesse volumétrique maximale" msgid "Bed temperature" -msgstr "Bed temperature" - -msgid "mm³" -msgstr "mm³" +msgstr "Température du plateau" msgid "Start calibration" -msgstr "Start" +msgstr "Démarrer" msgid "Next" -msgstr "Next" +msgstr "Suivant" msgid "" "Calibration completed. Please find the most uniform extrusion line on your " "hot bed like the picture below, and fill the value on its left side into the " "factor K input box." msgstr "" -"Calibration completed. Please find the most uniform extrusion line on your " -"hot bed like the picture below, and fill the value on its left side into the " -"factor K input box." +"Calibrage terminé. Veuillez trouver la ligne d'extrusion la plus uniforme " +"sur votre plateau comme dans l'image ci-dessous, et entrez la valeur sur son " +"côté gauche dans le champ de saisie du facteur K." msgid "Save" -msgstr "Save" +msgstr "Enregistrer" msgid "Last Step" -msgstr "Back" +msgstr "Retour" msgid "Example" -msgstr "Example" +msgstr "Exemple" #, c-format, boost-format msgid "Calibrating... %d%%" -msgstr "Calibrating... %d%%" +msgstr "Calibration… %d%%" msgid "Calibration completed" -msgstr "Calibration completed" +msgstr "Calibration terminé" #, c-format, boost-format msgid "%s does not support %s" -msgstr "%s does not support %s" +msgstr "%s ne prend pas en charge %s" msgid "Dynamic flow Calibration" -msgstr "Dynamic flow calibration" +msgstr "Calibrage dynamique du débit" msgid "Step" -msgstr "Step" +msgstr "Étape" + +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" msgid "AMS Slots" -msgstr "AMS Slots" +msgstr "Emplacements AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Externe" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Buse" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Note: Only the AMS slots loaded with the same material type can be selected." msgid "Enable AMS" -msgstr "Enable AMS" +msgstr "Activer l'AMS" msgid "Print with filaments in the AMS" -msgstr "Print with filament in the AMS" +msgstr "Imprimer avec du filament de l'AMS" msgid "Disable AMS" -msgstr "Disable AMS" +msgstr "Désactiver l'AMS" msgid "Print with the filament mounted on the back of chassis" -msgstr "Print with filament on external spool" - -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" +msgstr "Impression avec du filament de la bobine externe" msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" +"Veuillez changer le déshydratant lorsqu’il est trop humide. L’indicateur " +"peut ne pas s’afficher correctement dans les cas suivants : lorsque le " +"couvercle est ouvert ou que le sachet de déshydratant est changé. Il faut " +"des heures pour absorber l’humidité, les basses températures ralentissent " +"également le processus." msgid "" -"Config which AMS slot should be used for a filament used in the print job" -msgstr "" "Configure which AMS slot should be used for a filament used in the print job." +msgstr "" +"Configurez l'emplacement AMS qui doit être utilisé pour un filament utilisé " +"dans la tâche d'impression" msgid "Filament used in this print job" -msgstr "Filament used in this print job" +msgstr "Filament utilisé dans ce travail d'impression" msgid "AMS slot used for this filament" -msgstr "AMS slot used for this filament" +msgstr "Emplacement AMS utilisé pour ce filament" msgid "Click to select AMS slot manually" -msgstr "Click to select AMS slot manually" +msgstr "Cliquez pour sélectionner manuellement l'emplacement AMS" msgid "Do not Enable AMS" -msgstr "Do not Enable AMS" +msgstr "Ne pas activer l'AMS" msgid "Print using materials mounted on the back of the case" -msgstr "Print using filament on external spool." +msgstr "Imprimez en utilisant le filament de la bobine externe" -msgid "Print with filaments in ams" -msgstr "Print with filament in AMS" +msgid "Print with filaments in AMS" +msgstr "Imprimer avec du filament de l'AMS" msgid "Print with filaments mounted on the back of the chassis" -msgstr "Print with filament on external spool" +msgstr "Impression avec du filament de la bobine externe" + +msgid "Auto Refill" +msgstr "Recharge Automatique" + +msgid "Left" +msgstr "Gauche" + +msgid "Right" +msgstr "Droite" msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "" -"When the current material run out, the printer will continue to print in the " -"following order." +"Lorsque le filament actuel est épuisé, l'imprimante\n" +"continue d'imprimer dans l'ordre suivant." + +msgid "Identical filament: same brand, type and color" +msgstr "" msgid "Group" -msgstr "Group" +msgstr "Groupe" + +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" msgid "The printer does not currently support auto refill." -msgstr "The printer does not currently support auto refill." +msgstr "" +"L’imprimante ne prend actuellement pas en charge la recharge automatique." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"AMS filament backup is not enabled; please enable it in the AMS settings." +"La sauvegarde du filament AMS n'est pas activée, veuillez l'activer dans les " +"paramètres AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" -msgstr "DRY" +msgstr "SEC" msgid "WET" -msgstr "WET" +msgstr "HUMIDE" msgid "AMS Settings" -msgstr "AMS Settings" +msgstr "Paramètres AMS" msgid "Insertion update" -msgstr "Insertion update" +msgstr "Insertion de la mise à jour" msgid "" "The AMS will automatically read the filament information when inserting a " "new Bambu Lab filament. This takes about 20 seconds." msgstr "" -"The AMS will automatically read the filament information when inserting a " -"new Bambu Lab filament spool. This takes about 20 seconds." +"L'AMS lit automatiquement les informations relatives au filament lors de " +"l'insertion d'une nouvelle bobine de filament Bambu Lab. Cela prend environ " +"20 secondes." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" -"Note: if a new filament is inserted during printing, the AMS will not " -"automatically read any information until printing is completed." +"Remarque : si un nouveau filament est inséré pendant l’impression, l’AMS ne " +"lira pas automatiquement les informations jusqu’à ce que l’impression soit " +"terminée." msgid "" "When inserting a new filament, the AMS will not automatically read its " "information, leaving it blank for you to enter manually." msgstr "" -"When inserting a new filament, the AMS will not automatically read its " -"information, leaving it blank for you to enter manually." +"Lors de l'insertion d'un nouveau filament, l'AMS ne lit pas automatiquement " +"ses informations. Elles sont laissées vides pour que vous puissiez les " +"saisir manuellement." msgid "Power on update" -msgstr "Update on startup" +msgstr "Mise à jour de la mise sous tension" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." -msgstr "" -"The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will rotate the " +"start-up. It will take about 1 minute. The reading process will roll the " "filament spools." +msgstr "" +"Au démarrage, l'AMS lit automatiquement les informations relatives au " +"filament inséré. Cela prend environ 1 minute et ce processus fait tourner " +"les bobines de filament." msgid "" "The AMS will not automatically read information from inserted filament " "during startup and will continue to use the information recorded before the " "last shutdown." msgstr "" -"The AMS will not automatically read information from inserted filament " -"during startup and will continue to use the information recorded before the " -"last shutdown." +"L'AMS ne lira pas automatiquement les informations du filament inséré " +"pendant le démarrage et continuera à utiliser les informations enregistrées " +"avant le dernier arrêt." msgid "Update remaining capacity" -msgstr "Update remaining capacity" +msgstr "Mettre à jour la capacité restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." msgid "AMS filament backup" -msgstr "AMS filament backup" +msgstr "Filament de secours AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" -msgstr "" -"AMS will continue to another spool with the same filament properties " +"AMS will continue to another spool with matching filament properties " "automatically when current filament runs out." +msgstr "" +"L'AMS passera automatiquement à une autre bobine avec les mêmes propriétés " +"de filament lorsque la bobine actuelle est épuisé" msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "Détection de l’impression dans l’air" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." +"Détecte le colmatage et le grignotage du filament, interrompant " +"immédiatement l’impression pour économiser du temps et du filament." msgid "File" -msgstr "File" +msgstr "Fichier" msgid "Calibration" msgstr "Calibration" @@ -3058,77 +3638,81 @@ msgid "" "Failed to download the plug-in. Please check your firewall settings and vpn " "software, check and retry." msgstr "" -"Failed to download the plug-in. Please check your firewall settings and vpn " -"software and retry." +"Échec du téléchargement du plug-in. Veuillez vérifier les paramètres de " +"votre pare-feu et votre logiciel VPN puis réessayer." msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " "by anti-virus software." msgstr "" -"Failed to install the plug-in. Please check whether it is blocked or has " -"been deleted by anti-virus software." +"Échec de l'installation du plug-in. Veuillez vérifier s'il est bloqué ou " +"s'il a été supprimé par un logiciel anti-virus." msgid "click here to see more info" -msgstr "click here to see more info" +msgstr "cliquez ici pour voir plus d'informations" msgid "Please home all axes (click " -msgstr "Please home all axes (click " +msgstr "Veuillez mettre à 0 les axes (cliquer " msgid "" ") to locate the toolhead's position. This prevents device moving beyond the " "printable boundary and causing equipment wear." msgstr "" -") to locate the toolhead's position. This prevents device moving beyond the " -"printable boundary and causing equipment wear." +") pour localiser la position de la tête. Cela éviter de dépasser la limite " +"imprimable et de provoquer une usure de l'équipement." msgid "Go Home" -msgstr "Go Home" +msgstr "Retour 0" msgid "" "A error occurred. Maybe memory of system is not enough or it's a bug of the " "program" msgstr "" -"An error occurred. The system may have run out of memory, or a bug may have " -"occurred." +"Une erreur s'est produite. Peut-être que la mémoire du système n'est pas " +"suffisante ou c'est un bug du programme" -msgid "Please save project and restart the program. " -msgstr "Please save your project and restart the application." +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Une erreur fatale s’est produite : « %1% »" -msgid "Processing G-Code from Previous file..." -msgstr "Processing G-Code from previous file…" +msgid "Please save project and restart the program." +msgstr "Veuillez enregistrer le projet et redémarrer le programme." + +msgid "Processing G-code from Previous file..." +msgstr "Traitement du G-Code du fichier précédent…" msgid "Slicing complete" -msgstr "Slicing complete" +msgstr "Découpe terminée" msgid "Access violation" -msgstr "Access violation" +msgstr "Violation d'accès" msgid "Illegal instruction" -msgstr "Illegal instruction" +msgstr "Instruction illégale" msgid "Divide by zero" -msgstr "Divide by zero" +msgstr "Diviser par zéro" msgid "Overflow" -msgstr "Overflow" +msgstr "Débordement" msgid "Underflow" -msgstr "Underflow" +msgstr "Soupassement" msgid "Floating reserved operand" -msgstr "Floating reserved operand" +msgstr "Opérande réservée flottante" msgid "Stack overflow" -msgstr "Stack overflow" +msgstr "Débordement de pile" msgid "Running post-processing scripts" -msgstr "Running post-processing scripts" +msgstr "Exécution de scripts de post-traitement" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "Le script de post-traitement a été exécuté avec succès" -msgid "Unknown error occured during exporting G-code." -msgstr "" +msgid "Unknown error occurred during exporting G-code." +msgstr "Une erreur inconnue s’est produite lors de l’exportation du G-code." #, boost-format msgid "" @@ -3136,6 +3720,9 @@ msgid "" "card is write locked?\n" "Error message: %1%" msgstr "" +"La copie du G-code temporaire vers le G-code de sortie a échoué. La carte SD " +"est peut-être bloquée en écriture ?\n" +"Message d’erreur : %1%" #, boost-format msgid "" @@ -3143,412 +3730,206 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" +"La copie du G-code temporaire vers le G-code de sortie a échoué. Il se peut " +"qu’il y ait un problème avec le dispositif cible, veuillez essayer " +"d’exporter à nouveau ou d’utiliser un autre périphérique. Le G-code de " +"sortie corrompu se trouve dans %1%.tmp." #, boost-format msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" +"Le renommage du G-code après la copie dans le dossier de destination " +"sélectionné a échoué. Le chemin actuel est %1%.tmp. Veuillez réessayer " +"l’exportation." #, boost-format msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" +"La copie du G-code temporaire est terminée mais le code original à %1% n’a " +"pas pu être ouvert pendant la vérification de la copie. Le G-code de sortie " +"se trouve dans %2%.tmp." #, boost-format msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" +"La copie du G-code temporaire est terminée mais le code exporté n’a pas pu " +"être ouvert lors du contrôle de la copie. Le G-code de sortie se trouve dans " +"%1%.tmp." #, boost-format msgid "G-code file exported to %1%" -msgstr "" +msgstr "Fichier G-code exporté vers %1%" -msgid "Unknown error when export G-code." -msgstr "Unknown error with G-code export" +msgid "Unknown error when exporting G-code." +msgstr "Erreur inconnue lors de l'exportation du G-code." #, boost-format msgid "" -"Failed to save gcode file.\n" -"Error message: %1%.\n" -"Source file %2%." -msgstr "" "Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." +msgstr "" +"Échec de l'enregistrement du fichier gcode. Message d'erreur : %1%. Fichier " +"source %2%." msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Copying of the temporary G-code to the output G-code failed." +msgstr "La copie du G-code temporaire vers le G-code de sortie a échoué" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" - -msgid "Device" -msgstr "Device" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "View" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Add" - -msgid "Idle" -msgstr "Idle" - -msgid "Printing" -msgstr "Printing" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Prepare" - -msgid "Slicing" -msgstr "Slicing" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Sending" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Resume" - -msgid "Stop" -msgstr "Stop" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Loading..." - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Preparing print job" - -msgid "Abnormal print file data. Please slice again" -msgstr "Abnormal print file data. Please slice again" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Bed leveling" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Send" - -msgid "Name is invalid;" -msgstr "Name is invalid;" - -msgid "illegal characters:" -msgstr "Illegal characters:" - -msgid "illegal suffix:" -msgstr "Illegal suffix:" - -msgid "The name is not allowed to be empty." -msgstr "The name field is not allowed to be empty." - -msgid "The name is not allowed to start with space character." -msgstr "The name is not allowed to start with a space." - -msgid "The name is not allowed to end with space character." -msgstr "The name is not allowed to end with a space." - -msgid "The name length exceeds the limit." -msgstr "The name length exceeds the limit." +"Planification du téléversement vers `%1% `. Voir Fenêtre -> File d'attente " +"de téléversement de l'hôte d'impression" msgid "Origin" -msgstr "Origin" +msgstr "Origine" msgid "Size in X and Y of the rectangular plate." -msgstr "Size in X and Y of the rectangular plate." +msgstr "Taille en X et Y du plateau rectangulaire." msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " +"Distance des coordonnées 0,0 du G-code depuis le coin avant gauche du " "rectangle." msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." +"Diamètre du plateau d'impression. Il est supposé que l'origine (0,0) est " +"située au centre." msgid "Rectangular" -msgstr "Rectangular" +msgstr "Rectangle" msgid "Circular" -msgstr "Circular" +msgstr "Circulaire" msgid "Load shape from STL..." -msgstr "Load shape from STL..." +msgstr "Charger une forme depuis un STL …" msgid "Settings" -msgstr "Settings" +msgstr "Réglages" msgid "Texture" msgstr "Texture" msgid "Remove" -msgstr "Remove" +msgstr "Retirer" msgid "Not found:" -msgstr "Not found:" +msgstr "Introuvable:" msgid "Model" -msgstr "Model" +msgstr "Modèle" msgid "Choose an STL file to import bed shape from:" -msgstr "Choose an STL file to import bed shape from:" +msgstr "" +"Choisissez un fichier STL à partir duquel importer la forme du plateau :" msgid "Invalid file format." -msgstr "Invalid file format." +msgstr "Format de fichier non valide." msgid "Error! Invalid model" -msgstr "Error: invalid model" +msgstr "Erreur ! Modèle invalide" msgid "The selected file contains no geometry." -msgstr "The selected file contains no geometry." +msgstr "Le fichier sélectionné ne contient aucune géométrie." msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" -"The selected file contains several disjointed areas. This is not supported." +"Le fichier sélectionné contient plusieurs zones disjointes. Cela n'est pas " +"utilisable." msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "Choose a file to import bed texture from (PNG/SVG):" +msgstr "" +"Choisir un fichier à partir duquel importer la texture du plateau (PNG/SVG) :" msgid "Choose an STL file to import bed model from:" -msgstr "Choose an STL file to import bed model from:" +msgstr "" +"Choisissez un fichier STL à partir duquel importer le modèle de plateau :" msgid "Bed Shape" -msgstr "Bed Shape" +msgstr "Forme du plateau" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" +"La température minimale recommandée ne peut être supérieure à la température " +"maximale recommandée.\n" msgid "Please check.\n" -msgstr "Please check.\n" +msgstr "Veuillez vérifier.\n" msgid "" "Nozzle may be blocked when the temperature is out of recommended range.\n" "Please make sure whether to use the temperature to print.\n" "\n" msgstr "" -"The nozzle may become clogged when the temperature is out of the recommended " -"range.\n" -"Please make sure whether to use this temperature to print.\n" -"\n" +"La buse peut être bloquée lorsque la température est hors de la plage " +"recommandée.\n" +"Veuillez vous assurer d'utiliser la température pour imprimer.\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" -msgstr "" "The recommended nozzle temperature for this filament type is [%d, %d] " -"degrees centigrade" +"degrees Celsius." +msgstr "" +"La température de buse recommandée pour ce type de filament est de [%d, %d] " +"degrés Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" -"Too small max volumetric speed.\n" -"Value was reset to 0.5" +"Vitesse volumétrique maximale trop faible.\n" +"La valeur a été réinitialisée à 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"Current chamber temperature is higher than the material's safe temperature; " -"this may result in material softening and nozzle clogs.The maximum safe " -"temperature for the material is %d" +"La température actuelle du caisson est supérieure à la température de " +"sécurité du matériau, ce qui peut entraîner un ramollissement et un bouchage " +"du filament. La température de sécurité maximale pour le matériau est %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" -msgstr "" -"Layer height too small\n" -"It has been reset to 0.2" +"Reset to 0.2." +msgstr "Hauteur de couche trop petite. Réinitialiser à 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" -msgstr "" -"Ironing spacing too small\n" -"It has been reset to 0.1" +"Reset to 0.1." +msgstr "Espacement de lissage trop petit. Réinitialiser à 0.1" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" -"Zero first layer height is invalid.\n" -"\n" -"The first layer height will be reset to 0.2." +"La hauteur de couche initiale nulle n'est pas valide. La hauteur de la " +"première couche sera réinitialisée à 0,2." msgid "" "This setting is only used for model size tunning with small value in some " @@ -3558,11 +3939,11 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"This setting is only used for tuning model size by small amounts.\n" -"For example, when the model size has small errors or when tolerances are " -"incorrect. For large adjustments, please use the model scale function.\n" -"\n" -"The value will be reset to 0." +"Ce paramètre n'est utilisé que pour le réglage de la taille du modèle avec " +"une petite valeur dans certains cas. Par exemple, lorsque la taille du " +"modèle présente une petite erreur et est difficile à assembler. Pour un " +"réglage de grande taille, veuillez utiliser la fonction d'échelle de modèle. " +"La valeur sera remise à 0." msgid "" "Too large elephant foot compensation is unreasonable.\n" @@ -3571,23 +3952,28 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"The elephant foot compensation value is too large.\n" -"If there are significant elephant foot issues, please check other settings.\n" -"The bed temperature may be too high, for example.\n" -"\n" -"The value will be reset to 0." +"Une trop grande compensation de la patte d'éléphant est déraisonnable. Si " +"vous avez vraiment un effet de patte d'éléphant important, veuillez vérifier " +"d'autres paramètres. Par exemple, si la température du plateau est trop " +"élevée. La valeur sera remise à 0." msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" +"La paroi supplémentaire alternée ne fonctionne pas bien lorsque le paramètre " +"Assurer l’épaisseur de la coque verticale est réglée sur Tous." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" +"Modifier ces paramètres automatiquement ?\n" +"Oui - Modifier l’épaisseur de la coque verticale pour qu’elle soit modérée " +"et activer la paroi supplémentaire\n" +"Non - Ne pas utiliser la paroi supplémentaire alternée" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3596,11 +3982,12 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"Prime tower does not work when Adaptive Layer Height or Independent Support " -"Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height and Independent Support Layer Height" +"La tour d’amorçage ne fonctionne pas lorsque la hauteur de couche adaptative " +"ou la hauteur de couche de support indépendante est activée.\n" +"Que souhaitez-vous conserver ?\n" +"OUI - Conserver la tour d’amorçage \n" +"NON - Conserver la hauteur de la couche adaptative et la hauteur de la " +"couche de support indépendante" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3608,10 +3995,11 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"Prime tower does not work when Adaptive Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height" +"La tour d’amorçage ne fonctionne pas lorsque la hauteur de couche adaptative " +"est activée.\n" +"Que souhaitez-vous conserver ?\n" +"OUI - Conserver la tour d’amorçage \n" +"NON - Conserver la hauteur de la couche adaptative" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" @@ -3619,1539 +4007,1987 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"Prime tower does not work when Independent Support Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Independent Support Layer Height" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"While printing by object, the extruder may collide with a skirt.\n" -"Thus, reset the skirt layer to 1 to avoid collisions." +"La tour d’amorçage ne fonctionne pas lorsque la hauteur de la couche de " +"support indépendante est activée.\n" +"Que souhaitez-vous conserver ?\n" +"OUI - Garder la tour de purge\n" +"NON - Gardez la hauteur de la couche de support indépendante" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +"seam_slope_start_height doit être inférieur à la hauteur de couche.\n" +"Remise à 0." + +#, c-format, boost-format +msgid "" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." msgid " But machines with I3 structure will not generate timelapse videos." -msgstr " But machines with I3 structure will not generate timelapse videos." +msgstr "" +" Mais les machines avec une structure I3 ne généreront pas de vidéos " +"timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Change these settings automatically? \n" -"Yes - Change these settings and enable spiral/vase mode automatically\n" -"No - Cancel enabling spiral mode" +"Modifier ces paramètres automatiquement ?\n" +"Oui - Modifiez ces paramètres et activez automatiquement le mode spirale/" +"vase\n" +"Non - Annuler l'activation du mode spirale" + +msgid "Printing" +msgstr "Impression" msgid "Auto bed leveling" -msgstr "Auto bed leveling" +msgstr "Niveau de plateau automatique" msgid "Heatbed preheating" -msgstr "Heatbed preheating" +msgstr "Préchauffage du plateau chauffant" -msgid "Sweeping XY mech mode" -msgstr "Sweeping XY mech mode" +msgid "Vibration compensation" +msgstr "Compensation des vibrations" msgid "Changing filament" -msgstr "Changing filament" +msgstr "Changement de filament" msgid "M400 pause" -msgstr "M400 pause" +msgstr "Pause M400" -msgid "Paused due to filament runout" -msgstr "Paused due to filament runout" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Heating hotend" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Calibrating extrusion" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" -msgstr "Scanning bed surface" +msgstr "Balayage de la surface du plateau" msgid "Inspecting first layer" -msgstr "Inspecting first layer" +msgstr "Inspection de la première couche" msgid "Identifying build plate type" -msgstr "Identifying build plate type" +msgstr "Identification du type de plaque" msgid "Calibrating Micro Lidar" -msgstr "Calibrating Micro Lidar" +msgstr "Calibrage du Micro-Lidar" msgid "Homing toolhead" -msgstr "Homing toolhead" +msgstr "Tête d'outil de guidage" msgid "Cleaning nozzle tip" -msgstr "Cleaning nozzle tip" +msgstr "Nettoyage de la buse" msgid "Checking extruder temperature" -msgstr "Checking extruder temperature" +msgstr "Vérification de la température de l'extrudeur" -msgid "Printing was paused by the user" -msgstr "Printing was paused by the user" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pause of front cover falling" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" -msgstr "Calibrating the micro lidar" +msgid "Calibrating the micro lidar" +msgstr "Calibrage du micro-Lidar" -msgid "Calibrating extrusion flow" -msgstr "Calibrating extrusion flow" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Paused due to nozzle temperature malfunction" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Paused due to heat bed temperature malfunction" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" -msgstr "Filament unloading" +msgstr "Déchargement du filament" -msgid "Skip step pause" -msgstr "Skip step pause" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" -msgstr "Filament loading" +msgstr "Chargement du filament" -msgid "Motor noise calibration" -msgstr "Motor noise calibration" +msgid "Motor noise cancellation" +msgstr "Suppression du bruit du moteur" -msgid "Paused due to AMS lost" -msgstr "Paused due to AMS lost" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Paused due to low speed of the heat break fan" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Paused due to chamber temperature control error" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" -msgstr "Cooling chamber" +msgstr "Refroidissement du caisson" -msgid "Paused by the Gcode inserted by user" -msgstr "Paused by the Gcode inserted by user" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" -msgstr "Motor noise showoff" +msgstr "Démonstration du bruit du moteur" -msgid "Nozzle filament covered detected pause" -msgstr "Nozzle filament covered detected pause" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Cutter error pause" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "First layer error pause" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Nozzle clog pause" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" -msgstr "Unknown" - -msgid "Fatal" -msgstr "Fatal" - -msgid "Serious" -msgstr "Serious" - -msgid "Common" -msgstr "Common" +msgstr "Inconnu" msgid "Update successful." -msgstr "Update successful." +msgstr "Mise à jour réussie." msgid "Downloading failed." -msgstr "Downloading failed." +msgstr "Le téléchargement a échoué." msgid "Verification failed." -msgstr "Verification failed." +msgstr "Échec de la vérification." msgid "Update failed." -msgstr "Update failed." +msgstr "Mise à jour a échoué." + +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" msgid "" "The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" "TPU) is not allowed to be loaded." msgstr "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/" -"TPU) is not allowed to be loaded." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order " -"to avoid extruder clogging, it is not allowed to set the chamber temperature " -"above 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." -msgstr "" -"When you set the chamber temperature below 40℃, the chamber temperature " "control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." +msgstr "" +"Lorsque vous réglez la température du caisson en dessous de 40℃, le contrôle " +"de la température du caisson ne sera pas activé. Et la température cible du " +"caisson sera automatiquement réglée sur 0℃." -msgid "Failed to start printing job" -msgstr "Failed to start print job" +msgid "Failed to start print job" +msgstr "" msgid "" "This calibration does not support the currently selected nozzle diameter" msgstr "" -"This calibration does not support the currently selected nozzle diameter" +"Cette calibration ne prend pas en charge le diamètre de buse actuellement " +"sélectionné" msgid "Current flowrate cali param is invalid" -msgstr "Current flowrate cali param is invalid" +msgstr "Le paramètre de calibration du débit actuel n’est pas valide" msgid "Selected diameter and machine diameter do not match" -msgstr "Selected diameter and machine diameter do not match" +msgstr "" +"Le diamètre sélectionné et le diamètre de la machine ne correspondent pas" -msgid "Failed to generate cali gcode" -msgstr "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" +msgstr "Échec de la génération du G-code de calibration" msgid "Calibration error" -msgstr "Calibration error" +msgstr "Erreur de la calibration" -msgid "TPU is not supported by AMS." -msgstr "TPU is not supported by AMS." +msgid "Resume Printing" +msgstr "Reprendre l’impression" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF is not supported by AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Arrêter l’impression" + +msgid "Check Assistant" +msgstr "Assistant de contrôle" + +msgid "Filament Extruded, Continue" +msgstr "Filament extrudé, Continuer" + +msgid "Not Extruded Yet, Retry" +msgstr "Pas encore extrudé, réessayer" + +msgid "Finished, Continue" +msgstr "Terminé, Continuer" + +msgid "Load Filament" +msgstr "Charger" + +msgid "Filament Loaded, Resume" +msgstr "Filament chargé, Reprendre" + +msgid "View Liveview" +msgstr "Vue en direct" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Terminé" + +msgid "Retry" +msgstr "Réessayer" + +msgid "Resume" +msgstr "Résumer" + +msgid "Unknown error." msgstr "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." msgid "default" -msgstr "default" +msgstr "défaut" #, boost-format msgid "Edit Custom G-code (%1%)" -msgstr "" +msgstr "Modifier le G-code personnalisé (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" +"Placeholders intégrés (double-cliquez sur l’élément pour l’ajouter au G-code)" -msgid "Search gcode placeholders" -msgstr "" +msgid "Search G-code placeholders" +msgstr "Rechercher les placeholders de G-code" msgid "Add selected placeholder to G-code" -msgstr "" +msgstr "Ajouter le placeholder sélectionné au G-code" msgid "Select placeholder" -msgstr "" +msgstr "Sélectionner un placeholder" msgid "[Global] Slicing State" -msgstr "" +msgstr "[Global] État de la découpe" msgid "Read Only" -msgstr "" +msgstr "Lecture seule" msgid "Read Write" -msgstr "" +msgstr "Lire et écrire" msgid "Slicing State" -msgstr "" +msgstr "État de la découpe" msgid "Print Statistics" -msgstr "" +msgstr "Statistiques d’impression" msgid "Objects Info" -msgstr "" +msgstr "Informations sur les objets" msgid "Dimensions" -msgstr "" +msgstr "Dimensions" msgid "Temperatures" -msgstr "" +msgstr "Températures" msgid "Timestamps" -msgstr "" +msgstr "Horodatages" #, boost-format msgid "Specific for %1%" -msgstr "" +msgstr "Spécifique à %1%" msgid "Presets" -msgstr "Presets" +msgstr "Préréglages" msgid "Print settings" -msgstr "Print settings" +msgstr "Réglages d'impression" msgid "Filament settings" -msgstr "Filament settings" +msgstr "Réglages du filament" msgid "SLA Materials settings" -msgstr "" +msgstr "Paramètres des matériaux SLA" msgid "Printer settings" -msgstr "Printer settings" +msgstr "Paramètres de l'imprimante" msgid "parameter name" -msgstr "parameter name" +msgstr "nom du paramètre" #, c-format, boost-format -msgid "%s can't be percentage" -msgstr "%s can’t be a percentage" +msgid "%s can't be a percentage" +msgstr "%s ne peut pas être un pourcentage" #, c-format, boost-format msgid "Value %s is out of range, continue?" -msgstr "Value %s is out of range, continue?" +msgstr "La valeur %s est hors plage, continuer ?" msgid "Parameter validation" -msgstr "Parameter validation" +msgstr "Validation du paramètre" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "" +"La valeur %s est hors plage. La plage valide est comprise entre %d et %d." msgid "Value is out of range." -msgstr "Value is out of range." +msgstr "La valeur est hors plage." #, c-format, boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." -msgstr "" -"Is it %s%% or %s %s?\n" -"YES for %s%%, \n" -"NO for %s %s." +msgstr "Est-ce %s%% ou %s %s ? OUI pour %s%%, NON pour %s %s." #, boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" +"Format d'entrée non valide. Vecteur de dimensions attendu dans le format " +"suivant : \"%1%\"" msgid "Input value is out of range" -msgstr "" +msgstr "La valeur entrée est hors plage" msgid "Some extension in the input is invalid" +msgstr "Une extension dans l'entrée n'est pas valide" + +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "" #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "Invalid format. Expected vector format: \"%1%\"" +msgstr "Format invalide. Format vectoriel attendu : \"%1%\"" + +msgid "N/A" +msgstr "N / A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" msgid "Layer Height" -msgstr "Layer Height" +msgstr "Hauteur de la couche" msgid "Line Width" -msgstr "Line Width" +msgstr "Largeur de ligne" msgid "Fan Speed" -msgstr "Fan Speed" - -msgid "Temperature" -msgstr "Temperature" +msgstr "Vitesse du ventilateur" msgid "Flow" -msgstr "Flow" +msgstr "Débit" msgid "Tool" -msgstr "Tool" +msgstr "Outil" msgid "Layer Time" -msgstr "Layer Time" +msgstr "Temps de couche" msgid "Layer Time (log)" -msgstr "Layer Time (log)" +msgstr "Temps de couche (journal)" msgid "Height: " -msgstr "Height: " +msgstr "Hauteur: " msgid "Width: " -msgstr "Width: " +msgstr "Largeur: " msgid "Speed: " -msgstr "Speed: " +msgstr "Vitesse: " msgid "Flow: " -msgstr "Flow: " +msgstr "Débit: " msgid "Layer Time: " -msgstr "Layer Time: " +msgstr "Temps de couche: " msgid "Fan: " -msgstr "Fan: " +msgstr "Ventilation: " msgid "Temperature: " -msgstr "Temperature: " +msgstr "Température: " -msgid "Loading G-codes" -msgstr "Loading G-code" +msgid "Loading G-code" +msgstr "Chargement des G-codes" msgid "Generating geometry vertex data" -msgstr "Generating geometry vertex data" +msgstr "Génération de données de sommet de géométrie" msgid "Generating geometry index data" -msgstr "Generating geometry index data" +msgstr "Génération de données d'index de géométrie" msgid "Statistics of All Plates" -msgstr "Statistics of All Plates" +msgstr "Statistiques de toutes les plaques" msgid "Display" -msgstr "Display" +msgstr "Afficher" msgid "Flushed" -msgstr "Flushed" +msgstr "Purgé" msgid "Tower" -msgstr "Tower" +msgstr "Tour" msgid "Total" msgstr "Total" msgid "Total Estimation" -msgstr "Total estimation" +msgstr "Estimation totale" msgid "Total time" -msgstr "Total time" +msgstr "Durée totale" msgid "Total cost" -msgstr "Total cost" +msgstr "Coût total" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Astuces:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Astuces" msgid "up to" -msgstr "up to" +msgstr "jusqu’à" msgid "above" -msgstr "above" +msgstr "plus que" msgid "from" -msgstr "from" - -msgid "Color Scheme" -msgstr "Color scheme" +msgstr "de" msgid "Time" -msgstr "Time" +msgstr "Durée" -msgid "Percent" -msgstr "Percent" - -msgid "Used filament" -msgstr "Used filament" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" -msgstr "Layer height (mm)" +msgstr "Hauteur de couche (mm)" msgid "Line Width (mm)" -msgstr "Line width (mm)" +msgstr "Largeur de ligne (mm)" msgid "Speed (mm/s)" -msgstr "Speed (mm/s)" +msgstr "Vitesse (mm/s)" msgid "Fan Speed (%)" -msgstr "Fan speed (%)" +msgstr "Vitesse du ventilateur (%)" msgid "Temperature (°C)" -msgstr "Temperature (°C)" +msgstr "Température (°C)" msgid "Volumetric flow rate (mm³/s)" -msgstr "Volumetric flow rate (mm³/s)" +msgstr "Débit volumétrique (mm³/s)" msgid "Travel" -msgstr "Travel" +msgstr "Déplacement" msgid "Seams" -msgstr "Seams" +msgstr "Coutures" msgid "Retract" -msgstr "Retract" +msgstr "Rétraction" msgid "Unretract" -msgstr "Unretract" +msgstr "Annuler le retrait" msgid "Filament Changes" -msgstr "Filament changes" +msgstr "Changements de filaments" msgid "Wipe" -msgstr "Wipe" +msgstr "Essuyage" msgid "Options" -msgstr "Options" +msgstr "Choix" msgid "travel" -msgstr "Travel" +msgstr "déplacement" msgid "Extruder" -msgstr "Extruder" - -msgid "Filament change times" -msgstr "Filament change times" +msgstr "Extrudeur" msgid "Cost" -msgstr "Cost" +msgstr "Coût" + +msgid "Filament change times" +msgstr "Temps de changement de filament" msgid "Color change" -msgstr "Color change" +msgstr "Changement de couleur" msgid "Print" -msgstr "Print" +msgstr "Imprimer" msgid "Printer" -msgstr "Printer" +msgstr "Imprimante" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" -msgstr "" +msgid "Tool Change" +msgstr "Changement d'outil" msgid "Time Estimation" -msgstr "Time Estimation" +msgstr "Estimation de temps" msgid "Normal mode" -msgstr "Normal mode" +msgstr "Mode normal" msgid "Total Filament" -msgstr "Total Filament" +msgstr "Filament total" msgid "Model Filament" -msgstr "Model Filament" +msgstr "Filament pour le modèle" msgid "Prepare time" -msgstr "Prepare time" +msgstr "Temps de préparation" msgid "Model printing time" -msgstr "Model printing time" +msgstr "Temps d'impression du modèle" msgid "Switch to silent mode" -msgstr "Switch to silent mode" +msgstr "Passer en mode silencieux" msgid "Switch to normal mode" -msgstr "Switch to normal mode" +msgstr "Passer en mode normal" -msgid "Variable layer height" -msgstr "Variable layer height" - -msgid "Adaptive" -msgstr "Adaptive" - -msgid "Quality / Speed" -msgstr "Quality / Speed" - -msgid "Smooth" -msgstr "Smooth" - -msgid "Radius" -msgstr "Radius" - -msgid "Keep min" -msgstr "Keep min" - -msgid "Left mouse button:" -msgstr "Left mouse button:" - -msgid "Add detail" -msgstr "Add Detail" - -msgid "Right mouse button:" -msgstr "Right mouse button:" - -msgid "Remove detail" -msgstr "Remove detail" - -msgid "Shift + Left mouse button:" -msgstr "Shift + Left mouse button:" - -msgid "Reset to base" -msgstr "Reset to base" - -msgid "Shift + Right mouse button:" -msgstr "Shift + Right mouse button:" - -msgid "Smoothing" -msgstr "Smoothing" - -msgid "Mouse wheel:" -msgstr "Mouse wheel:" - -msgid "Increase/decrease edit area" -msgstr "Increase/decrease edit area" - -msgid "Sequence" -msgstr "Sequence" - -msgid "Mirror Object" -msgstr "Mirror object" - -msgid "Tool Move" -msgstr "Tool move" - -msgid "Tool Rotate" -msgstr "Tool Rotate" - -msgid "Move Object" -msgstr "Move object" - -msgid "Auto Orientation options" -msgstr "Auto orientation options" - -msgid "Enable rotation" -msgstr "Enable rotation" - -msgid "Optimize support interface area" -msgstr "Optimize support interface area" - -msgid "Orient" -msgstr "Orient" - -msgid "Arrange options" -msgstr "Arrange options" - -msgid "Spacing" -msgstr "Spacing" - -msgid "0 means auto spacing." -msgstr "0 means auto spacing." - -msgid "Auto rotate for arrangement" -msgstr "Auto rotate for arrangement" - -msgid "Allow multiple materials on same plate" -msgstr "Allow multiple materials on same plate" - -msgid "Avoid extrusion calibration region" -msgstr "Avoid extrusion calibration region" - -msgid "Align to Y axis" -msgstr "Align to Y axis" - -msgid "Add plate" -msgstr "Add Plate" - -msgid "Auto orient" -msgstr "Auto Orient" - -msgid "Arrange all objects" -msgstr "Arrange all objects" - -msgid "Arrange objects on selected plates" -msgstr "Arrange objects on selected plates" - -msgid "Split to objects" -msgstr "Split to Objects" - -msgid "Split to parts" -msgstr "Split to Parts" - -msgid "Assembly View" -msgstr "Assembly View" - -msgid "Select Plate" -msgstr "Select Plate" - -msgid "Assembly Return" -msgstr "Assembly Return" - -msgid "return" -msgstr "return" - -msgid "Paint Toolbar" -msgstr "Paint Toolbar" - -msgid "Explosion Ratio" -msgstr "Explosion Ratio" - -msgid "Section View" -msgstr "Section View" - -msgid "Assemble Control" -msgstr "Assembly Control" - -msgid "Total Volume:" -msgstr "Total Volume:" - -msgid "Assembly Info" -msgstr "Assembly Info" - -msgid "Volume:" -msgstr "Volume:" - -msgid "Size:" -msgstr "Size:" - -#, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " -"separate the conflicted objects farther (%s <-> %s)." +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." msgstr "" -msgid "An object is layed over the boundary of plate." -msgstr "An object is laid over the boundary of the plate." - -msgid "A G-code path goes beyond the max print height." -msgstr "A G-code path goes beyond the max print height." - -msgid "A G-code path goes beyond the boundary of plate." -msgstr "A G-code path goes beyond plate boundaries." - -msgid "Only the object being edit is visible." -msgstr "Only the object being edited is visible." - msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and " "confirming that the height is within the build volume." msgstr "" -"An object is laid over the boundary of the plate or exceeds the height " -"limit.\n" + +msgid "Variable layer height" +msgstr "Hauteur de couche variable" + +msgid "Adaptive" +msgstr "Adaptatif" + +msgid "Quality / Speed" +msgstr "Qualité / Vitesse" + +msgid "Smooth" +msgstr "Lisse" + +msgid "Radius" +msgstr "Rayon" + +msgid "Keep min" +msgstr "Garder min" + +msgid "Add detail" +msgstr "Ajouter Détail" + +msgid "Remove detail" +msgstr "Supprimer détail" + +msgid "Reset to base" +msgstr "Revenir de base" + +msgid "Smoothing" +msgstr "Lissage" + +msgid "Mouse wheel:" +msgstr "Molette de la souris :" + +msgid "Increase/decrease edit area" +msgstr "Augmenter/diminuer la zone d'édition" + +msgid "Sequence" +msgstr "Séquence" + +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" "Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +"confirming that the height is within the build volume.\n" +msgstr "" -msgid "Calibration step selection" -msgstr "Calibration step selection" +msgid "left nozzle" +msgstr "" -msgid "Micro lidar calibration" -msgstr "Micro lidar calibration" +msgid "right nozzle" +msgstr "" -msgid "Bed leveling" -msgstr "Bed leveling" +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" -msgid "Vibration compensation" -msgstr "Vibration compensation" - -msgid "Motor noise cancellation" -msgstr "Motor noise cancellation" - -msgid "Calibration program" -msgstr "Calibration program" +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" msgid "" -"The calibration program detects the status of your device automatically to " -"minimize deviation.\n" -"It keeps the device performing optimally." -msgstr "" -"The calibration program detects the status of your device automatically to " -"minimize deviation.\n" -"It keeps the device performing optimally." - -msgid "Calibration Flow" -msgstr "Calibration Flow" - -msgid "Start Calibration" -msgstr "Start Calibration" - -msgid "Completed" -msgstr "Completed" - -msgid "Calibrating" -msgstr "Calibrating" - -msgid "No step selected" -msgstr "No step selected" - -msgid "Auto-record Monitoring" -msgstr "Auto-record Monitoring" - -msgid "Go Live" -msgstr "Go Live" - -msgid "Liveview Retry" -msgstr "Liveview Retry" - -msgid "Resolution" -msgstr "Resolution" - -msgid "Enable" -msgstr "Enable" - -msgid "Hostname or IP" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" msgstr "" -msgid "Custom camera source" +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "" -msgid "Show \"Live Video\" guide page." -msgstr "Show \"Live Video\" guide page." - -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" -msgstr "Connect Printer (LAN)" - -msgid "Please input the printer access code:" -msgstr "Please input the printer access code:" - -msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" -"on the printer, as shown in the figure:" +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "" -"You can find it in \"Settings > Network > Access code\"\n" -"on the printer, as shown in the figure:" -msgid "Invalid input." -msgstr "Invalid input" +msgid "Mirror Object" +msgstr "Symétriser l’objet" -msgid "New Window" -msgstr "New Window" +msgid "Tool Move" +msgstr "Déplacement d'outil" -msgid "Open a new window" -msgstr "Open a new window" +msgid "Tool Rotate" +msgstr "Rotation de l'outil" -msgid "Application is closing" -msgstr "Closing application" +msgid "Move Object" +msgstr "Déplacer l'Objet" -msgid "Closing Application while some presets are modified." -msgstr "Closing Application while some presets are modified." +msgid "Auto Orientation options" +msgstr "Options d'orientation automatique" -msgid "Logging" -msgstr "Logging" +msgid "Enable rotation" +msgstr "Activer la rotation" -msgid "Preview" -msgstr "Preview" +msgid "Optimize support interface area" +msgstr "Optimiser la zone d'interface de support" -msgid "Multi-device" -msgstr "Multi-device" +msgid "Orient" +msgstr "Orienter" -msgid "Project" -msgstr "Project" +msgid "Arrange options" +msgstr "Options d'agencement" -msgid "Yes" -msgstr "Yes" +msgid "Spacing" +msgstr "Espacement" -msgid "No" -msgstr "No" +msgid "0 means auto spacing." +msgstr "0 signifie espacement automatique." -msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "will be closed before creating a new model. Do you want to continue?" +msgid "Auto rotate for arrangement" +msgstr "Rotation automatique pour l'arrangement" -msgid "Slice plate" -msgstr "Slice plate" +msgid "Allow multiple materials on same plate" +msgstr "Autoriser plusieurs matériaux sur la même plaque" -msgid "Print plate" -msgstr "Print plate" +msgid "Avoid extrusion calibration region" +msgstr "Éviter la région de calibration de l'extrusion" + +msgid "Align to Y axis" +msgstr "Aligner sur l’axe Y" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Ajouter" + +msgid "Add plate" +msgstr "Ajouter un plateau" + +msgid "Auto orient all/selected objects" +msgstr "Orientation automatique tous/sélectionnés objets" + +msgid "Auto orient all objects on current plate" +msgstr "Orientation automatique tous les objets sur la plaque actuelle" + +msgid "Arrange all objects" +msgstr "Organiser tous les objets" + +msgid "Arrange objects on selected plates" +msgstr "Organiser les objets sur les plaques sélectionnées" + +msgid "Split to objects" +msgstr "Diviser en objets individuels" + +msgid "Split to parts" +msgstr "Scinder en pièces" + +msgid "Assembly View" +msgstr "Vue de l'assemblage" + +msgid "Select Plate" +msgstr "Sélectionner le plateau" + +msgid "Slicing" +msgstr "Découpe" msgid "Slice all" -msgstr "Slice all" +msgstr "Tout découper" + +msgid "Failed" +msgstr "Échoué" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + +msgid "Assembly Return" +msgstr "Retour d'assemblage" + +msgid "Return" +msgstr "Retour" + +msgid "Toggle Axis" +msgstr "" + +msgid "Paint Toolbar" +msgstr "Barre d'outils de peinture" + +msgid "Explosion Ratio" +msgstr "Taux d'explosion" + +msgid "Section View" +msgstr "Vue en coupe" + +msgid "Assemble Control" +msgstr "Contrôle de l'Assemblage" + +msgid "Selection Mode" +msgstr "" + +msgid "Total Volume:" +msgstr "Volume total:" + +msgid "Assembly Info" +msgstr "Informations sur l'assemblage" + +msgid "Volume:" +msgstr "Le volume:" + +msgid "Size:" +msgstr "Taille:" + +#, c-format, boost-format +msgid "" +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " +"separate the conflicted objects farther (%s <-> %s)." +msgstr "" +"Des conflits de chemins G-code ont été trouvés au niveau de la couche %d, z " +"= %.2lfmm. Veuillez séparer davantage les objets en conflit (%s <-> %s)." + +msgid "An object is laid over the plate boundaries." +msgstr "Un objet est posé sur la limite du plateau." + +msgid "A G-code path goes beyond the max print height." +msgstr "Un chemin du G-code dépasse la hauteur d’impression maximale." + +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Un chemin du G-code va au-delà de la limite du plateau." + +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "Seul l'objet en cours d'édition est visible." + +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" +msgstr "" + +msgid "Calibration step selection" +msgstr "Sélection de l'étape de calibration" + +msgid "Micro lidar calibration" +msgstr "Calibration du Micro-Lidar" + +msgid "Bed leveling" +msgstr "Mise à niveau du plateau" + +msgid "High-temperature Heatbed Calibration" +msgstr "" + +msgid "Calibration program" +msgstr "Programme de calibration" + +msgid "" +"The calibration program detects the status of your device automatically to " +"minimize deviation.\n" +"It keeps the device performing optimally." +msgstr "" +"Le processus de calibration détecte automatiquement l'état de votre appareil " +"pour minimiser les écarts.\n" +"Il permet à l'appareil de fonctionner de manière optimale." + +msgid "Calibration Flow" +msgstr "Calibration débit" + +msgid "Start Calibration" +msgstr "Démarrer la calibration" + +msgid "Completed" +msgstr "Terminé" + +msgid "Calibrating" +msgstr "Étalonnage" + +msgid "No step selected" +msgstr "Aucune étape sélectionnée" + +msgid "Auto-record Monitoring" +msgstr "Surveillance de l'enregistrement automatique" + +msgid "Go Live" +msgstr "Passer en LIVE" + +msgid "Liveview Retry" +msgstr "Réessai de l’affichage en direct" + +msgid "Resolution" +msgstr "Résolution" + +msgid "Enable" +msgstr "Activer" + +msgid "Hostname or IP" +msgstr "Nom d’hôte ou IP" + +msgid "Custom camera source" +msgstr "Source caméra personnalisée" + +msgid "Show \"Live Video\" guide page." +msgstr "Afficher la page de guide « Vidéo en direct »." + +msgid "Connect Printer (LAN)" +msgstr "Connecter l'imprimante (LAN)" + +msgid "Please input the printer access code:" +msgstr "Veuillez saisir le code d’accès à l’imprimante :" + +msgid "" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "Invalid input." +msgstr "Saisie non valide." + +msgid "New Window" +msgstr "Nouvelle fenêtre" + +msgid "Open a new window" +msgstr "Ouvrir une nouvelle fenêtre" + +msgid "Application is closing" +msgstr "L'application se ferme" + +msgid "Closing Application while some presets are modified." +msgstr "" +"Fermeture de l'application pendant que certains préréglages sont modifiés." + +msgid "Logging" +msgstr "Enregistrement" + +msgid "Prepare" +msgstr "Préparer" + +msgid "Preview" +msgstr "Aperçu" + +msgid "Device" +msgstr "Appareil" + +msgid "Multi-device" +msgstr "Multi-appareils" + +msgid "Project" +msgstr "Projet" + +msgid "Yes" +msgstr "Oui" + +msgid "No" +msgstr "Non" + +msgid "will be closed before creating a new model. Do you want to continue?" +msgstr "sera fermé avant de créer un nouveau modèle. Voulez-vous continuer ?" + +msgid "Slice plate" +msgstr "Découper le plateau" + +msgid "Print plate" +msgstr "Imprimer le plateau" msgid "Export G-code file" -msgstr "Export G-code file" +msgstr "Exporter le fichier G-code" + +msgid "Send" +msgstr "Envoyer" msgid "Export plate sliced file" -msgstr "Export plate sliced file" +msgstr "Exporter le fichier découpé du plateau" msgid "Export all sliced file" -msgstr "Export all sliced file" +msgstr "Exporter tous les fichiers découpés" msgid "Print all" -msgstr "Print all" +msgstr "Tout imprimer" msgid "Send all" -msgstr "Send all" +msgstr "Tout envoyer" + +msgid "Send to Multi-device" +msgstr "Envoyer à plusieurs appareils" msgid "Keyboard Shortcuts" -msgstr "Keyboard Shortcuts" +msgstr "Raccourcis Clavier" msgid "Show the list of the keyboard shortcuts" -msgstr "Show the list of keyboard shortcuts" +msgstr "Afficher la liste des raccourcis clavier" msgid "Setup Wizard" -msgstr "Setup Wizard" +msgstr "Assistant de configuration" msgid "Show Configuration Folder" -msgstr "Show Configuration Folder" +msgstr "Afficher le dossier de configuration" msgid "Show Tip of the Day" -msgstr "Show Tip of the Day" +msgstr "Afficher l'Astuce du Jour" msgid "Check for Update" -msgstr "Check for Updates" +msgstr "Vérifier la mise à jour" msgid "Open Network Test" -msgstr "Open Network Test" +msgstr "Ouvrir le Test de Réseau" #, c-format, boost-format msgid "&About %s" -msgstr "&About %s" +msgstr "&À propos de %s" msgid "Upload Models" -msgstr "Upload Models" +msgstr "Téléverser les Modèles" msgid "Download Models" -msgstr "Download Models" +msgstr "Télécharger des Modèles" msgid "Default View" -msgstr "Default View" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Top" +msgstr "Vue par défaut" msgid "Top View" -msgstr "Top View" +msgstr "Vue du Dessus" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" -msgstr "Bottom" +msgstr "Dessous" msgid "Bottom View" -msgstr "Bottom View" +msgstr "Vue du Dessous" msgid "Front" -msgstr "Front" +msgstr "Avant" msgid "Front View" -msgstr "Front View" +msgstr "Vue Avant" msgid "Rear" -msgstr "Rear" +msgstr "Arrière" msgid "Rear View" -msgstr "Rear View" - -msgid "Left" -msgstr "Left" +msgstr "Vue Arrière" msgid "Left View" -msgstr "Left View" - -msgid "Right" -msgstr "Right" +msgstr "Vue Gauche" msgid "Right View" -msgstr "Right View" +msgstr "Vue Droite" msgid "Start a new window" -msgstr "Start a new window" +msgstr "Démarrer une nouvelle fenêtre" msgid "New Project" -msgstr "New Project" +msgstr "Nouveau projet" msgid "Start a new project" -msgstr "Start a new project" +msgstr "Démarrer un nouveau projet" msgid "Open a project file" -msgstr "Open a project file" +msgstr "Ouvrir un fichier de projet" -msgid "Recent projects" -msgstr "Recent Projects" +msgid "Recent files" +msgstr "" msgid "Save Project" -msgstr "Save Project" +msgstr "Enregistrer le projet" msgid "Save current project to file" -msgstr "Save current project to file" +msgstr "Enregistrer le projet actuel dans un fichier" msgid "Save Project as" -msgstr "Save Project as" - -msgid "Shift+" -msgstr "Shift+" +msgstr "Enregistrer le projet sous" msgid "Save current project as" -msgstr "Save current project as" +msgstr "Enregistrer le projet actuel sous" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" -msgstr "Import 3MF/STL/STEP/SVG/OBJ/AMF" +msgstr "Importer des fichiers 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" -msgstr "Load a model" +msgstr "Charger un modèle" msgid "Import Zip Archive" -msgstr "" +msgstr "Importer une archive Zip" msgid "Load models contained within a zip archive" -msgstr "" +msgstr "Charger les modèles contenus dans une archive zip" msgid "Import Configs" -msgstr "Import Configs" +msgstr "Importer des Configs" msgid "Load configs" -msgstr "Load configs" +msgstr "Charger les Configs" msgid "Import" -msgstr "Import" +msgstr "Importer" msgid "Export all objects as one STL" -msgstr "Export all objects as one STL" +msgstr "Exporter tous les objets en un seul STL" msgid "Export all objects as STLs" -msgstr "Export all objects as STLs" +msgstr "Exporter tous les objets en tant que plusieurs STL" msgid "Export Generic 3MF" -msgstr "Export Generic 3MF" +msgstr "Exporter en fichier 3MF Générique" msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Export 3mf file without using some 3mf-extensions" +msgstr "Exportation de fichiers 3MF sans utiliser d'extensions" msgid "Export current sliced file" -msgstr "Export current sliced file" +msgstr "Exporter le fichier découpé actuel" msgid "Export all plate sliced file" -msgstr "Export all plate sliced file" +msgstr "Exporter tous les fichiers découpés du plateau" msgid "Export G-code" -msgstr "Export G-code" +msgstr "Exporter le G-code" msgid "Export current plate as G-code" -msgstr "Export current plate as G-code" +msgstr "Exporter le plateau actuel en G-code" + +msgid "Export toolpaths as OBJ" +msgstr "Exporter les parcours d'outils en OBJ" msgid "Export Preset Bundle" -msgstr "" +msgstr "Exporter l’ensemble des préréglages" msgid "Export current configuration to files" -msgstr "Export current configuration to files" +msgstr "Exporter la configuration actuelle vers des fichiers" msgid "Export" -msgstr "Export" +msgstr "Exporter" msgid "Quit" -msgstr "Quit" +msgstr "Quitter" msgid "Undo" -msgstr "Undo" +msgstr "Annuler" msgid "Redo" -msgstr "Redo" +msgstr "Recommencer" msgid "Cut selection to clipboard" -msgstr "Cut selection to clipboard" +msgstr "Couper la sélection dans le presse-papiers" msgid "Copy" -msgstr "Copy" +msgstr "Copier" msgid "Copy selection to clipboard" -msgstr "Copy selection to clipboard" +msgstr "Copier la sélection dans le presse-papier" msgid "Paste" -msgstr "Paste" +msgstr "Coller" msgid "Paste clipboard" -msgstr "Paste clipboard" +msgstr "Coller le presse-papier" msgid "Delete selected" -msgstr "Delete Selected" +msgstr "Supprimer la sélection" msgid "Deletes the current selection" -msgstr "Deletes the current selection" +msgstr "Supprime la sélection en cours" msgid "Delete all" -msgstr "Delete All" +msgstr "Tout supprimer" msgid "Deletes all objects" -msgstr "Deletes all objects" +msgstr "Supprimer tous les objets" msgid "Clone selected" -msgstr "Clone Selected" +msgstr "Cloner sélectionné" msgid "Clone copies of selections" -msgstr "Clone copies of selections" +msgstr "Cloner des copies de sélections" + +msgid "Duplicate Current Plate" +msgstr "Dupliquer le plateau actuel" + +msgid "Duplicate the current plate" +msgstr "Dupliquer le plateau actuel" msgid "Select all" -msgstr "Select All" +msgstr "Tout sélectionner" msgid "Selects all objects" -msgstr "Selects all objects" +msgstr "Sélectionner tous les objets" msgid "Deselect all" -msgstr "Deselect All" +msgstr "Désélectionner tout" msgid "Deselects all objects" -msgstr "Deselects all objects" +msgstr "Désélectionner tous les objets" msgid "Use Perspective View" -msgstr "Use Perspective View" +msgstr "Utiliser la vue en perspective" msgid "Use Orthogonal View" -msgstr "Use Orthogonal View" +msgstr "Utiliser la vue orthogonale" + +msgid "Auto Perspective" +msgstr "Perspective Automatique" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Passage automatique de la vue en plan à la vue en perspective lorsque l’on " +"passe d’une vue de haut en bas ou de côté à une vue orthographique." msgid "Show &G-code Window" -msgstr "" +msgstr "Afficher la fenêtre du &G-code" -msgid "Show g-code window in Previce scene" -msgstr "" +msgid "Show G-code window in Preview scene." +msgstr "Afficher la fenêtre du G-code dans la scène précédente." msgid "Show 3D Navigator" -msgstr "" +msgstr "Afficher le navigateur 3D" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" +"Afficher le navigateur 3D dans la scène de préparation et de " +"prévisualisation." msgid "Reset Window Layout" -msgstr "" +msgstr "Réinitialiser la présentation de la fenêtre" msgid "Reset to default window layout" -msgstr "" +msgstr "Rétablissement de la disposition par défaut des fenêtres" msgid "Show &Labels" -msgstr "Show &Labels" +msgstr "Afficher &les étiquettes" -msgid "Show object labels in 3D scene" -msgstr "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." +msgstr "Afficher les étiquettes des objets dans la scène 3D." msgid "Show &Overhang" -msgstr "Show &Overhang" +msgstr "Montrer les &surplombs" -msgid "Show object overhang highlight in 3D scene" -msgstr "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." +msgstr "Afficher la surbrillance des surplombs d'un objet dans la scène 3D." + +msgid "Show Selected Outline (beta)" +msgstr "Afficher le contour sélectionné (expérimental)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Afficher le tracé contour de l’objet sélectionné dans la scène 3D." msgid "Preferences" -msgstr "Preferences" +msgstr "Préférences" + +msgid "View" +msgstr "Affichage" msgid "Help" -msgstr "Help" +msgstr "Aide" msgid "Temperature Calibration" -msgstr "Temperature Calibration" +msgstr "Calibration de Température" msgid "Pass 1" -msgstr "Pass 1" +msgstr "Passe 1" msgid "Flow rate test - Pass 1" -msgstr "Flow rate test - Pass 1" +msgstr "Test de débit - Passe 1" msgid "Pass 2" -msgstr "Pass 2" +msgstr "Passe 2" msgid "Flow rate test - Pass 2" -msgstr "Flow rate test - Pass 2" +msgstr "Test de débit - Passe 2" + +msgid "YOLO (Recommended)" +msgstr "YOLO (Recommandé)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Calibrage du débit YOLO d’Orca, par intervalle de 0,01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (version perfectionniste)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Calibrage du débit YOLO d’Orca, par intervalle de 0,005" msgid "Flow rate" -msgstr "Flow rate" +msgstr "Débit" msgid "Pressure advance" -msgstr "Pressure advance" +msgstr "" msgid "Retraction test" -msgstr "Retraction test" - -msgid "Orca Tolerance Test" -msgstr "Orca Tolerance Test" +msgstr "Test de rétraction" msgid "Max flowrate" -msgstr "Max flowrate" +msgstr "Débit maximal" + +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "More..." - msgid "Tutorial" -msgstr "Tutorial" +msgstr "Didacticiel" msgid "Calibration help" -msgstr "Calibration help" - -msgid "More calibrations" -msgstr "More calibrations" +msgstr "Aide à la calibration" msgid "&Open G-code" -msgstr "&Open G-code" +msgstr "&Ouvrir G-code" msgid "Open a G-code file" -msgstr "Open a G-code file" +msgstr "Ouvrir un fichier G-code" msgid "Re&load from Disk" -msgstr "Re&load from Disk" +msgstr "Recharger à partir du disque" msgid "Reload the plater from disk" -msgstr "Reload the plater from disk" +msgstr "Rechargez la machine à partir du disque" msgid "Export &Toolpaths as OBJ" -msgstr "Export &Toolpaths as OBJ" - -msgid "Export toolpaths as OBJ" -msgstr "Export toolpaths as OBJ" +msgstr "Exporter &Toolpaths en OBJ" msgid "Open &Slicer" -msgstr "Open &Slicer" +msgstr "Ouvrir &Studio" msgid "Open Slicer" -msgstr "Open Slicer" +msgstr "Ouvrir Studio" msgid "&Quit" -msgstr "&Quit" +msgstr "&Quitter" #, c-format, boost-format msgid "Quit %s" -msgstr "Quit %s" +msgstr "Quitter %s" msgid "&File" msgstr "&File" msgid "&View" -msgstr "&View" +msgstr "&Voir" msgid "&Help" -msgstr "&Help" +msgstr "&Aide" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "A file exists with the same name: %s. Do you want to override it?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "" +"Il existe un fichier portant le même nom : %s. Voulez-vous le remplacer ?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "A config exists with the same name: %s. Do you want to override it?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "" +"Il existe une configuration portant le même nom : %s. Voulez-vous la " +"remplacer ?" msgid "Overwrite file" -msgstr "Overwrite file" +msgstr "Remplacer le fichier" + +msgid "Overwrite config" +msgstr "Ecraser la configuration" msgid "Yes to All" -msgstr "Yes to All" +msgstr "Oui à Tout" msgid "No to All" -msgstr "No to All" +msgstr "Non à Tout" msgid "Choose a directory" -msgstr "Choose a directory" +msgstr "Choisir un dossier" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "" +"Il y a %d configuration exportée. (Uniquement les configurations non système)" msgstr[1] "" +"Il y a %d configurations exportées. (Uniquement les configurations non " +"système)" msgid "Export result" -msgstr "Export Result" +msgstr "Exporter le Résultat" msgid "Select profile to load:" -msgstr "Select profile to load:" +msgstr "Sélectionnez le profil à charger :" #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "" "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "" +"Il y a %d configuration importée. (Uniquement les configurations non système " +"et compatibles)" msgstr[1] "" +"Il y a %d configurations importées. (Uniquement les configurations non " +"système et compatibles)" msgid "" "\n" "Hint: Make sure you have added the corresponding printer before importing " "the configs." msgstr "" +"\n" +"Conseil : assurez-vous d’avoir ajouté l’imprimante correspondante avant " +"d’importer les configurations." msgid "Import result" -msgstr "Import result" +msgstr "Importer le résultat" msgid "File is missing" -msgstr "File is missing" +msgstr "Le fichier est manquant" msgid "The project is no longer available." -msgstr "The project is no longer available." +msgstr "Le projet n'est plus disponible." msgid "Filament Settings" -msgstr "Filament settings" +msgstr "Réglages du filament" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" -"It contains the following information:\n" -"1. Process presets\n" -"2. Filament presets\n" -"3. Printer presets" +"Voulez-vous synchroniser vos données personnelles à partir de Bambu Cloud ?\n" +"Il contient les informations suivantes :\n" +"1. Les préréglages du Traitement\n" +"2. Les préréglages du Filament\n" +"3. Les préréglages de l'Imprimante" msgid "Synchronization" -msgstr "Synchronization" +msgstr "Synchronisation" msgid "The device cannot handle more conversations. Please retry later." -msgstr "The device cannot handle more conversations. Please retry later." +msgstr "" +"L'appareil ne peut pas gérer plus de conversations. Veuillez réessayer plus " +"tard." msgid "Player is malfunctioning. Please reinstall the system player." -msgstr "Player is malfunctioning. Please reinstall the system player." +msgstr "" +"Le lecteur ne fonctionne pas correctement. Veuillez réinstaller le lecteur " +"système." msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "The player is not loaded; please click the \"play\" button to retry." +msgstr "" +"Le lecteur n’est pas chargé, veuillez cliquer sur le bouton « play » pour " +"réessayer." msgid "Please confirm if the printer is connected." -msgstr "Please confirm if the printer is connected." +msgstr "Veuillez vérifier que l’imprimante est bien connectée." msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." msgstr "" -"The printer is currently busy downloading. Please try again after it " -"finishes." +"L’imprimante est actuellement occupée à télécharger. Veuillez réessayer une " +"fois le téléchargement terminé." msgid "Printer camera is malfunctioning." -msgstr "Printer camera is malfunctioning." +msgstr "La caméra de l’imprimante ne fonctionne pas correctement." -msgid "Problem occured. Please update the printer firmware and try again." -msgstr "A problem occurred. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "" +"Un problème s’est produit. Veuillez mettre à jour le micrologiciel de " +"l’imprimante et réessayer." msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." +"La fonction vue en direct sur réseau local est désactivée. Veuillez activer " +"l’affichage en direct sur l’écran de l’imprimante." msgid "Please enter the IP of printer to connect." -msgstr "Please enter the IP of the printer to connect." +msgstr "Veuillez saisir l’IP de l’imprimante à connecter." msgid "Initializing..." -msgstr "Initializing..." +msgstr "Initialisation…" msgid "Connection Failed. Please check the network and try again" -msgstr "Connection Failed. Please check the network and try again" +msgstr "Échec de la connexion. Veuillez vérifier le réseau et réessayer" msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" "Please check the network and try again. You can restart or update the " "printer if the issue persists." +msgstr "" +"Veuillez vérifier le réseau et réessayer, Vous pouvez redémarrer ou mettre à " +"jour l’imprimante si le problème persiste." msgid "The printer has been logged out and cannot connect." -msgstr "The printer has been logged out and cannot connect." +msgstr "L’imprimante a été déconnectée et ne peut pas se connecter." -msgid "Stopped." -msgstr "Stopped." +msgid "Video Stopped." +msgstr "Vidéo arrêtée." msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "LAN Connection Failed (Failed to start liveview)" +msgstr "" +"Échec de la connexion au réseau local (échec du démarrage de l’affichage en " +"direct)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" -"Virtual Camera Tools is required for this task!\n" -"Do you want to install them?" +"Les outils de caméra virtuelle sont nécessaires pour cette tâche !\n" +"Vous souhaitez les installer ?" msgid "Downloading Virtual Camera Tools" -msgstr "Downloading Virtual Camera Tools" +msgstr "Téléchargement des Outils de Caméra Virtuelle" msgid "" "Another virtual camera is running.\n" "Snapmaker Orca supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" -"Another virtual camera is running.\n" -"Snapmaker Orca supports only a single virtual camera.\n" -"Do you want to stop this virtual camera?" +"Une autre caméra virtuelle est en cours d'exécution.\n" +"Snapmaker Orca ne prend en charge qu'une seule caméra virtuelle.\n" +"Voulez-vous arrêter cette caméra virtuelle ?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" -msgstr "Virtual camera initialize failed (%s)!" +msgstr "L'initialisation de la caméra virtuelle a échoué (%s) !" msgid "Network unreachable" -msgstr "Network unreachable" +msgstr "Réseau inaccessible" msgid "Information" msgstr "Information" msgid "Playing..." -msgstr "Playing..." +msgstr "En cours…" + +msgid "Loading..." +msgstr "Chargement…" msgid "Year" -msgstr "Year" +msgstr "Année" msgid "Month" -msgstr "Month" +msgstr "Mois" msgid "All Files" -msgstr "All Files" +msgstr "Tous les Fichiers" msgid "Group files by year, recent first." -msgstr "Group files by year, recent first." +msgstr "Regroupez les fichiers par année, les plus récents en premier." msgid "Group files by month, recent first." -msgstr "Group files by month, recent first." +msgstr "Regroupez les fichiers par mois, les plus récents en premier." msgid "Show all files, recent first." -msgstr "Show all files, recent first." +msgstr "Afficher tous les fichiers, les plus récents en premier." + +msgid "Timelapse" +msgstr "Timelapse" msgid "Switch to timelapse files." -msgstr "Switch to timelapse files." +msgstr "Passez aux fichiers timelapse." msgid "Video" -msgstr "Video" +msgstr "Vidéo" msgid "Switch to video files." -msgstr "Switch to video files." +msgstr "Passez aux fichiers vidéo." msgid "Switch to 3mf model files." -msgstr "Switch to 3mf model files." +msgstr "Passez aux fichiers de modèle 3mf." msgid "Delete selected files from printer." -msgstr "Delete selected files from printer." +msgstr "Supprimez les fichiers sélectionnés de l'imprimante." msgid "Download" -msgstr "Download" +msgstr "Télécharger" msgid "Download selected files from printer." -msgstr "Download selected files from printer." +msgstr "Téléchargez les fichiers sélectionnés depuis l'imprimante." msgid "Select" -msgstr "Select" +msgstr "Sélectionner" msgid "Batch manage files." -msgstr "Batch manage files." +msgstr "Gérer les fichiers par lots." msgid "Refresh" -msgstr "Refresh" +msgstr "Actualiser" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "Recharger la liste des fichiers de l’imprimante." msgid "No printers." -msgstr "No printers." - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Connection failed [%d]!" +msgstr "Aucune imprimante." msgid "Loading file list..." -msgstr "Loading file list..." +msgstr "Chargement de la liste des fichiers…" msgid "No files" -msgstr "No files" +msgstr "Aucun fichier" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "Initialization failed (Device connection not ready)!" +msgstr "Échec du chargement" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "" +"Échec de la connexion au réseau local (Échec de la visualisation de la carte " +"SD)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Initialization failed (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "" +"Vous allez supprimer le fichier %u de l’imprimante. Êtes-vous sûr de vouloir " +"continuer ?" msgstr[1] "" +"Vous allez supprimer %u fichiers de l’imprimante. Êtes-vous sûr de vouloir " +"continuer ?" msgid "Delete files" -msgstr "Delete files" +msgstr "Supprimer les fichiers" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Do you want to delete the file '%s' from printer?" +msgstr "Voulez-vous supprimer le fichier '%s' de l'imprimante ?" msgid "Delete file" -msgstr "Delete file" +msgstr "Supprimer le fichier" -msgid "Fetching model infomations ..." -msgstr "Fetching model information..." +msgid "Fetching model information..." +msgstr "Récupération des informations sur le modèle…" msgid "Failed to fetch model information from printer." -msgstr "Failed to fetch model information from printer." +msgstr "Échec de la récupération des informations de modèle de l’imprimante." msgid "Failed to parse model information." -msgstr "Failed to parse model information." +msgstr "Échec de l’analyse des informations sur le modèle." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" +"Le fichier G-code .3mf ne contient pas de données G-code. Veuillez le " +"découper avec Snapmaker Orca et exporter un nouveau fichier G-code .3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." -msgstr "File '%s' was lost! Please download it again." +msgstr "Le fichier « %s » a été perdu ! Veuillez le télécharger à nouveau." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" +"Fichier : %s\n" +"Titre : %s\n" msgid "Download waiting..." -msgstr "Download waiting..." +msgstr "Téléchargement en attente…" msgid "Play" -msgstr "Play" +msgstr "Lecture" msgid "Open Folder" -msgstr "Open Folder" +msgstr "Ouvrir le Dossier" msgid "Download finished" -msgstr "Download finished" +msgstr "Téléchargement terminé" #, c-format, boost-format msgid "Downloading %d%%..." -msgstr "Downloading %d%%..." +msgstr "Téléchargement %d%%..." + +msgid "Air Condition" +msgstr "" msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." +"Reconnexion de l’imprimante, l’opération ne peut être effectuée maintenant, " +"veuillez réessayer plus tard." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." -msgstr "File does not exist." +msgstr "Le fichier n’existe pas." msgid "File checksum error. Please retry." -msgstr "File checksum error. Please retry." +msgstr "Erreur de somme de contrôle du fichier. Veuillez réessayer." msgid "Not supported on the current printer version." -msgstr "Not supported on the current printer version." +msgstr "Non pris en charge sur la version actuelle de l’imprimante." -msgid "Storage unavailable, insert SD card." -msgstr "Storage unavailable, insert Micro SD card." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" -msgstr "Error code: %d" +msgstr "Code d'erreur : %d" + +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" msgid "Speed:" -msgstr "Speed:" +msgstr "Vitesse:" msgid "Deadzone:" -msgstr "Deadzone:" +msgstr "Zone morte :" msgid "Options:" -msgstr "Options:" +msgstr "Options :" msgid "Zoom" msgstr "Zoom" @@ -5160,158 +5996,233 @@ msgid "Translation/Zoom" msgstr "Translation/Zoom" msgid "3Dconnexion settings" -msgstr "3Dconnexion settings" +msgstr "Paramètres 3Dconnexion" msgid "Swap Y/Z axes" -msgstr "Swap Y/Z axes" +msgstr "Permuter les axes Y/Z" msgid "Invert X axis" -msgstr "" +msgstr "Inverser l'axe X" msgid "Invert Y axis" -msgstr "" +msgstr "Inverser l'axe Y" msgid "Invert Z axis" -msgstr "" +msgstr "Inverser l'axe Z" msgid "Invert Yaw axis" -msgstr "" +msgstr "Inverser l’axe Yaw" msgid "Invert Pitch axis" -msgstr "" +msgstr "Inverser l'axe de tangage" msgid "Invert Roll axis" +msgstr "Inverser l’axe de roulis" + +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Rechercher" + +msgid "My Device" +msgstr "Mon appareil" + +msgid "Other Device" +msgstr "Autre appareil" + +msgid "Online" +msgstr "En ligne" + +msgid "Input access code" +msgstr "Saisir le code d'accès" + +msgid "Can't find my devices?" +msgstr "Vous ne trouvez pas d'appareils ?" + +msgid "Log out successful." +msgstr "Déconnexion réussie." + +msgid "Offline" +msgstr "Hors ligne" + +msgid "Busy" +msgstr "Occupé" + +msgid "Modifying the device name" +msgstr "Modification du nom de l'appareil" + +msgid "Name is invalid;" +msgstr "Le nom n'est pas valide ;" + +msgid "illegal characters:" +msgstr "caractères illégaux :" + +msgid "illegal suffix:" +msgstr "suffixe illégal :" + +msgid "The name is not allowed to be empty." +msgstr "Le nom ne doit pas être vide." + +msgid "The name is not allowed to start with space character." +msgstr "Le nom ne doit pas commencer par un espace." + +msgid "The name is not allowed to end with space character." +msgstr "Le nom ne doit pas se terminer par un espace." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Relier avec le code pin" + +msgid "Bind with Access Code" +msgstr "Relier avec un code d’accès" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" msgstr "" msgid "Printing Progress" -msgstr "Printing progress" +msgstr "Progression de l'impression" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Arrêt" msgid "Layer: N/A" -msgstr "Layer: N/A" +msgstr "Couche : N/A" msgid "Clear" -msgstr "Clear" +msgstr "Nettoyer" msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"You have completed printing the mall model, \n" -"but synchronizing rating information has failed." +"Vous avez terminé l’impression du modèle,\n" +"mais la synchronisation des informations de notation a échoué." msgid "How do you like this printing file?" -msgstr "How do you like this printing file?" +msgstr "Que pensez-vous de ce fichier d’impression ?" msgid "" "(The model has already been rated. Your rating will overwrite the previous " "rating.)" -msgstr "" -"(The model has already been rated. Your rating will overwrite the previous " -"rating.)" +msgstr "(Le modèle a déjà été noté. Votre note écrasera la note précédente.)" msgid "Rate" -msgstr "Rate" +msgstr "Noter" msgid "Camera" -msgstr "Camera" +msgstr "Caméra" -msgid "SD Card" -msgstr "MicroSD Card" - -msgid "Camera Setting" -msgstr "Camera Setting" - -msgid "Switch Camera View" +msgid "Storage" msgstr "" +msgid "Camera Setting" +msgstr "Réglage de la Caméra" + +msgid "Switch Camera View" +msgstr "Changer la vue de la caméra" + msgid "Control" -msgstr "Control" +msgstr "Contrôle" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "Pièces détachées pour imprimantes" msgid "Print Options" -msgstr "Print Options" - -msgid "100%" -msgstr "100%" +msgstr "Options d'impression" msgid "Lamp" -msgstr "Lamp" - -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Cham" +msgstr "Lampe" msgid "Bed" -msgstr "Bed" +msgstr "Plateau" msgid "Debug Info" -msgstr "Debug Info" +msgstr "Les informations de débogage" -msgid "No SD Card" -msgstr "No MicroSD Card" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "MicroSD Card Abnormal" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" -msgstr "Cancel print" +msgstr "Annuler l'impression" -msgid "Are you sure you want to cancel this print?" -msgstr "Are you sure you want to cancel this print?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "L'imprimante est occupée par un autre travail d'impression." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." -msgstr "Downloading..." +msgstr "Téléchargement…" msgid "Cloud Slicing..." -msgstr "Cloud Slicing..." +msgstr "Découpe par le Cloud..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "In Cloud Slicing Queue, there are %s tasks ahead of you." +msgstr "Dans la file d’attente Cloud Slicing, il reste %s tâches en attente." #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "Couche : %s" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "Couche : %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Veuillez chauffer la buse à plus de 170°C avant de charger ou de décharger " +"le filament." -msgid "Still unload" -msgstr "Still unload" - -msgid "Still load" -msgstr "Still load" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" -msgstr "Please select an AMS slot before calibration." +msgstr "Veuillez sélectionner un emplacement AMS avant la calibration" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " "unload the filament and try again." msgstr "" -"Cannot read filament info: the filament is loaded to the tool head. Please " -"unload the filament and try again." +"Impossible de lire les informations sur le filament: le filament est chargé " +"dans l'extrudeur. Veuillez décharger le filament et réessayer." msgid "This only takes effect during printing" -msgstr "This only takes effect during printing" +msgstr "Cela ne prend effet que pendant l'impression" msgid "Silent" -msgstr "Silent" +msgstr "Silencieux" msgid "Standard" msgstr "Standard" @@ -5320,1981 +6231,2634 @@ msgid "Sport" msgstr "Sport" msgid "Ludicrous" -msgstr "Ludicrous" +msgstr "Insensé" -msgid "Can't start this without SD card." -msgstr "Can't start without MicroSD card." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" -msgstr "Rate the Print Profile" +msgstr "Noter le profil d’impression" msgid "Comment" -msgstr "Comment" +msgstr "Commentaire" msgid "Rate this print" -msgstr "Rate this print" +msgstr "Noter cette impression" msgid "Add Photo" -msgstr "Add Photo" +msgstr "Ajouter une image" msgid "Delete Photo" -msgstr "Delete Photo" +msgstr "Supprimer l’image" msgid "Submit" -msgstr "Submit" +msgstr "Envoyer" msgid "Please click on the star first." -msgstr "Please click on the star first." - -msgid "InFo" -msgstr "Info" +msgstr "Veuillez d’abord cliquer sur l’étoile." msgid "Get oss config failed." -msgstr "Get oss config failed." +msgstr "Échec de l’obtention de la configuration du système d’exploitation." -msgid "Upload Pictrues" -msgstr "Upload Pictures" +msgid "Upload Pictures" +msgstr "Envoyer des images" msgid "Number of images successfully uploaded" -msgstr "Number of images successfully uploaded" +msgstr "Nombre d’images envoyées avec succès" msgid " upload failed" -msgstr " upload failed" +msgstr " échec de l’envoi" msgid " upload config prase failed\n" -msgstr " upload config prase failed\n" +msgstr " échec de l’analyse de la configuration de l’envoi\n" msgid " No corresponding storage bucket\n" -msgstr " No corresponding storage bucket\n" +msgstr " Aucun compartiment de stockage correspondant\n" -msgid " can not be opened\n" -msgstr " cannot be opened\n" +msgid " cannot be opened\n" +msgstr " ne peut pas être ouvert\n" msgid "" "The following issues occurred during the process of uploading images. Do you " "want to ignore them?\n" "\n" msgstr "" -"The following issues occurred during the process of uploading images. Do you " -"want to ignore them?\n" +"Les problèmes suivants se sont produits lors du processus d’envoi des " +"images. Voulez-vous les ignorer ?\n" "\n" msgid "info" msgstr "info" msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "Synchronizing the printing results. Please retry a few seconds later." +msgstr "" +"Synchronisation des résultats d’impression. Veuillez réessayer dans quelques " +"secondes." msgid "Upload failed\n" -msgstr "Upload failed\n" +msgstr "Échec de l’envoi\n" msgid "obtaining instance_id failed\n" -msgstr "Obtaining instance_id failed\n" +msgstr "échec de l’obtention de l’instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " +msgstr "" +"Le résultat de votre commentaire ne peut pas être téléchargé pour certaines " +"raisons :\n" +"\n" +" code d’erreur : " msgid "error message: " -msgstr "error message: " +msgstr "message d’erreur : " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" "Would you like to redirect to the webpage to give a rating?" +msgstr "" +"\n" +"\n" +"Souhaitez-vous être redirigé vers la page Web pour l’évaluation ?" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" -"Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"Certaines de vos images n’ont pas pu être envoyées. Souhaitez-vous être " +"redirigé vers la page Web pour l’évaluation ?" msgid "You can select up to 16 images." -msgstr "You can select up to 16 images." +msgstr "Vous pouvez sélectionner jusqu’à 16 images." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." -msgstr "" -"At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." +msgstr "" +"Au moins un enregistrement d’impression réussi de ce profil\n" +"d’impression est requis pour donner une note positive (4 ou 5 étoiles)." msgid "Status" -msgstr "Status" +msgstr "État" +msgctxt "Firmware" msgid "Update" -msgstr "Update" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" -msgstr "Don't show again" +msgstr "Ne plus afficher" + +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" #, c-format, boost-format msgid "%s error" -msgstr "%s error" +msgstr "Erreur %s" #, c-format, boost-format msgid "%s has encountered an error" -msgstr "%s has encountered an error" +msgstr "%s a rencontré une erreur" #, c-format, boost-format msgid "%s warning" -msgstr "%s warning" +msgstr "%s avertissement" #, c-format, boost-format msgid "%s has a warning" -msgstr "%s has a warning" +msgstr "%s a un avertissement" #, c-format, boost-format msgid "%s info" -msgstr "%s info" +msgstr "%s infos" #, c-format, boost-format msgid "%s information" -msgstr "%s information" +msgstr "Information de %s" msgid "Skip" -msgstr "Skip" +msgstr "Sauter" msgid "Newer 3mf version" -msgstr "Newer 3mf version" +msgstr "Nouvelle version 3mf" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" +"La version du fichier 3mf est en bêta et est plus récente que la version " +"actuelle d’Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "" +msgstr "Si vous souhaitez essayer Snapmaker Orca Beta, vous pouvez cliquer sur" msgid "Download Beta Version" -msgstr "Download Beta Version" +msgstr "Télécharger la version bêta" msgid "The 3mf file version is newer than the current Snapmaker Orca version." msgstr "" +"La version du fichier 3mf est plus récente que la version actuelle " +"d’Snapmaker Orca." msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." msgstr "" +"La mise à jour d’Snapmaker Orca permet d’activer toutes les fonctionnalités du " +"fichier 3mf." msgid "Current Version: " -msgstr "Current Version: " +msgstr "Version actuelle : " msgid "Latest Version: " -msgstr "Latest Version: " +msgstr "Dernière version : " + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" -msgstr "Not for now" +msgstr "Pas pour le moment" + +msgid "Server Exception" +msgstr "Exception serveur" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Le serveur n’est pas en mesure de répondre. Veuillez cliquer sur le lien ci-" +"dessous pour vérifier l’état du serveur." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Si le serveur est en panne, vous pouvez temporairement utiliser l’impression " +"hors ligne ou l’impression via le réseau local." + +msgid "How to use LAN only mode" +msgstr "Comment utiliser le mode LAN uniquement" + +msgid "Don't show this dialog again" +msgstr "Ne plus afficher cette boîte de dialogue" msgid "3D Mouse disconnected." -msgstr "3D Mouse disconnected." +msgstr "Souris 3D déconnectée." msgid "Configuration can update now." -msgstr "A new configuration is available. Update now?" +msgstr "La configuration peut maintenant être mise à jour." msgid "Detail." -msgstr "More" +msgstr "Détail." msgid "Integration was successful." -msgstr "Integration was successful." +msgstr "L'intégration a réussi." msgid "Integration failed." -msgstr "Integration failed." +msgstr "L'intégration a échoué." msgid "Undo integration was successful." -msgstr "Undo integration was successful." +msgstr "Annuler l'intégration a réussi." msgid "New network plug-in available." -msgstr "New network plug-in available" +msgstr "Nouveau plug-in réseau disponible." msgid "Details" -msgstr "Details" +msgstr "Détails" msgid "New printer config available." -msgstr "New printer config available." +msgstr "Nouvelle configuration de l’imprimante disponible." msgid "Wiki" msgstr "Wiki" msgid "Undo integration failed." -msgstr "Undo integration failed." +msgstr "L'annulation de l'intégration a échoué." msgid "Exporting." -msgstr "Exporting" +msgstr "Exportation." msgid "Software has New version." -msgstr "An update is available!" +msgstr "Le logiciel a une nouvelle version." msgid "Goto download page." -msgstr "Go to download page" +msgstr "Allez sur la page de téléchargement." msgid "Open Folder." -msgstr "Open Folder." +msgstr "Ouvrir un répertoire." msgid "Safely remove hardware." -msgstr "Safely remove hardware." +msgstr "Retirez le matériel en toute sécurité." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." -msgstr[0] "%1$d Object has custom supports." -msgstr[1] "%1$d Objects have custom supports." +msgstr[0] "%1$d objet a des supports personnalisés." +msgstr[1] " %1$d objets ont des supports personnalisés." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d Object has color painting." -msgstr[1] "%1$d Objects have color painting." +msgstr[0] "%1$d L'objet est mis en couleur." +msgstr[1] "%1$d L'objets sont mis en couleur." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d objet a été chargé en tant que partie de l’objet coupé." +msgstr[1] "%1$d objets ont été chargés en tant que partie de l’objet coupé." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgstr[1] "" msgid "ERROR" -msgstr "ERROR" +msgstr "ERREUR" msgid "COMPLETED" -msgstr "COMPLETED" +msgstr "Terminé" msgid "CANCELED" -msgstr "CANCELED" +msgstr "Annulé" msgid "Cancel upload" -msgstr "Cancel upload" +msgstr "Annuler le téléversement" msgid "Jump to" -msgstr "Jump to" +msgstr "Sauter à" msgid "Error:" -msgstr "Error:" +msgstr "Erreur:" msgid "Warning:" -msgstr "Warning:" +msgstr "Avertissement:" -msgid "Export successfully." -msgstr "Exported successfully" +msgid "Exported successfully" +msgstr "Exportation réussie." msgid "Model file downloaded." -msgstr "Model file downloaded." +msgstr "Modèle téléchargé." msgid "Serious warning:" -msgstr "Serious warning:" +msgstr "Avertissement sérieux :" msgid " (Repair)" -msgstr " (Repair)" +msgstr " (Réparation)" msgid " Click here to install it." -msgstr " Click here to install it." +msgstr " Cliquez ici pour l'installer." msgid "WARNING:" -msgstr "WARNING:" +msgstr "ATTENTION :" -msgid "Your model needs support ! Please make support material enable." -msgstr "Your model needs support! Please enable support material." +msgid "Your model needs support! Please enable support material." +msgstr "" +"Votre modèle a besoin de supports ! Veuillez activer le matériau de support." -msgid "Gcode path overlap" -msgstr "G-code path overlap" +msgid "G-code path overlap" +msgstr "Chevauchement de chemin G-code" msgid "Support painting" -msgstr "Support Painting" +msgstr "Peindre les supports" msgid "Color painting" -msgstr "Color Painting" +msgstr "Mettre en couleur" msgid "Cut connectors" -msgstr "Cut connectors" +msgstr "Connecteurs de découpe" msgid "Layers" -msgstr "Layers" +msgstr "Couches" msgid "Range" -msgstr "Range" +msgstr "Zone" msgid "" "The application cannot run normally because OpenGL version is lower than " "2.0.\n" msgstr "" -"The application cannot run normally because your OpenGL version is lower " -"than 2.0.\n" +"L'application ne peut pas fonctionner normalement car la version d'OpenGL " +"est inférieure à 2.0.\n" msgid "Please upgrade your graphics card driver." -msgstr "Please upgrade your graphics card driver." +msgstr "Veuillez mettre à jour le pilote de votre carte graphique." msgid "Unsupported OpenGL version" -msgstr "Unsupported OpenGL version" +msgstr "Version d'OpenGL non supportée" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" -msgstr "" -"Unable to load shaders:\n" -"%s" +msgstr "Impossible de charger les shaders : %s" msgid "Error loading shaders" -msgstr "Error loading shaders" +msgstr "Erreur lors du chargement des shaders" msgctxt "Layers" msgid "Top" -msgstr "Top" +msgstr "Du haut" msgctxt "Layers" msgid "Bottom" -msgstr "Bottom" - -msgid "Enable AI monitoring of printing" -msgstr "Enable AI monitoring of printing" - -msgid "Sensitivity of pausing is" -msgstr "Sensitivity of pausing is" +msgstr "Du bas" msgid "Enable detection of build plate position" -msgstr "Enable detection of build plate position" +msgstr "Activation de la détection de la position du plateau" msgid "" "The localization tag of build plate is detected, and printing is paused if " "the tag is not in predefined range." msgstr "" -"The localization tag of the build plate will be detected, and printing will " -"be paused if the tag is not in predefined range." +"La balise de localisation de la plaque est détectée, l'impression est " +"interrompue si la balise n'est pas dans la plage prédéfinie." -msgid "First Layer Inspection" -msgstr "First Layer Inspection" +msgid "Build Plate Detection" +msgstr "" -msgid "Auto-recovery from step loss" -msgstr "Auto-recover from step loss" +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" -msgid "Allow Prompt Sound" -msgstr "Allow Prompt Sound" +msgid "AI Detections" +msgstr "" -msgid "Filament Tangle Detect" -msgstr "Filament Tangle Detection" +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Activer la surveillance de l'impression par l'IA" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "Détection de l’encrassement de la buse" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + +msgid "First Layer Inspection" +msgstr "Inspection de la Première Couche" + +msgid "Auto-recovery from step loss" +msgstr "Restauration automatique en cas de perte de pas" + +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + +msgid "Allow Prompt Sound" +msgstr "Autoriser le son d’invite" + +msgid "Filament Tangle Detect" +msgstr "Détection de filament coincé" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" +"Vérifier si la buse est encrassée par du filament ou d’autres corps " +"étrangers." msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Type de buse" -msgid "Stainless Steel" -msgstr "Stainless Steel" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" -msgstr "Hardened Steel" +msgstr "Acier trempé" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Acier inoxydable" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Global" msgid "Objects" -msgstr "Objects" +msgstr "Objets" msgid "Advance" -msgstr "Advanced" +msgstr "Avancé" msgid "Compare presets" -msgstr "Compare presets" +msgstr "Comparer les Préréglages" msgid "View all object's settings" -msgstr "View all object's settings" +msgstr "Afficher tous les paramètres de l'objet" msgid "Material settings" -msgstr "" +msgstr "Réglages des matériaux" msgid "Remove current plate (if not last one)" -msgstr "" +msgstr "Retirer la plaque actuelle (si elle n'est pas la dernière)" msgid "Auto orient objects on current plate" -msgstr "" +msgstr "Orientation automatique des objets sur le plateau actuel" msgid "Arrange objects on current plate" -msgstr "" +msgstr "Organiser les objets sur le plateau actuel" msgid "Unlock current plate" -msgstr "" +msgstr "Déverrouiller le plateau actuel" msgid "Lock current plate" +msgstr "Verrouiller le plateau actuel" + +msgid "Filament grouping" msgstr "" msgid "Edit current plate name" -msgstr "" +msgstr "Modifier le nom du plateau actuel" msgid "Move plate to the front" -msgstr "" +msgstr "Déplacer le plateau vers l’avant" msgid "Customize current plate" +msgstr "Personnaliser le plateau actuel" + +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" msgstr "" #, boost-format msgid " plate %1%:" -msgstr " plate %1%:" +msgstr " plaque %1% :" msgid "Invalid name, the following characters are not allowed:" -msgstr "Invalid name, the following characters are not allowed:" +msgstr "Nom invalide, les caractères suivants ne sont pas autorisés :" msgid "Sliced Info" -msgstr "Sliced Info" +msgstr "Informations de découpage" msgid "Used Filament (m)" -msgstr "Used Filament (m)" +msgstr "Filament Utilisé (m)" msgid "Used Filament (mm³)" -msgstr "Used Filament (mm³)" +msgstr "Filament Utilisé (mm³)" msgid "Used Filament (g)" -msgstr "Used Filament (g)" +msgstr "Filament Utilisé (g)" msgid "Used Materials" -msgstr "Used Materials" +msgstr "Matériaux utilisés" msgid "Estimated time" -msgstr "Estimated time" +msgstr "Temps estimé" msgid "Filament changes" -msgstr "Filament changes" +msgstr "Changements de filaments" + +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" msgid "Click to edit preset" -msgstr "Click to edit preset" +msgstr "Cliquez pour éditer le préréglage" msgid "Connection" -msgstr "Connection" +msgstr "Connexion" -msgid "Bed type" -msgstr "Bed type" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" -msgstr "Flushing volumes" +msgstr "Volumes de purge" msgid "Add one filament" -msgstr "Add one filament" +msgstr "Ajouter un filament" msgid "Remove last filament" -msgstr "Remove last filament" +msgstr "Retirer le dernier filament" msgid "Synchronize filament list from AMS" -msgstr "Synchronize filament list from AMS" +msgstr "Synchroniser la liste des filaments depuis l'AMS" msgid "Set filaments to use" -msgstr "Set filaments to use" +msgstr "Définir les filaments à utiliser" msgid "Search plate, object and part." -msgstr "Search plate, object and part." +msgstr "Recherche de plaque, d'objet et de pièce." msgid "Pellets" -msgstr "" +msgstr "Pellets" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." - -msgid "Sync filaments with AMS" -msgstr "Sync filaments with AMS" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Already did a synchronization; do you want to sync only changes or resync " -"all?" - -msgid "Sync" -msgstr "Sync" - -msgid "Resync" -msgstr "Resync" msgid "There are no compatible filaments, and sync is not performed." -msgstr "There are no compatible filaments, and sync is not performed." +msgstr "" +"Il n'y a pas de filaments compatibles et la synchronisation n'est pas " +"effectuée." + +msgid "Sync filaments with AMS" +msgstr "Synchroniser les filaments avec AMS" msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format msgid "Do you want to save changes to \"%1%\"?" -msgstr "Do you want to save changes to \"%1%\"?" +msgstr "Voulez-vous enregistrer les modifications apportées à \"%1%\" ?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Démonté avec succès. Le périphérique %s(%s) peut maintenant être retiré en " +"toute sécurité de l'ordinateur." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Ejecting of device %s(%s) has failed." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "" -"Previously unsaved items have been detected. Do you want to restore them?" +msgstr "Projet précédent non enregistré détecté, voulez-vous le restaurer ?" msgid "Restore" -msgstr "Restore" +msgstr "Restaurer" msgid "" "The current hot bed temperature is relatively high. The nozzle may be " "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"The current heatbed temperature is relatively high. The nozzle may clog when " -"printing this filament in a closed environment. Please open the front door " -"and/or remove the upper glass." +"La température actuelle du plateau est relativement élevée. La buse peut se " +"boucher lors de l’impression de ce filament dans une enceinte fermée. " +"Veuillez ouvrir la porte avant et/ou retirer la vitre supérieure." msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"The nozzle hardness required by the filament is higher than the default " -"nozzle hardness of the printer. Please replace the hardened nozzle or " -"filament, otherwise, the nozzle will be worn down or damaged." +"La dureté de la buse requise par le filament est supérieure à la dureté par " +"défaut de la buse de l'imprimante. Veuillez remplacer la buse ou le " +"filament, sinon la buse s'usera ou s'endommagera." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " "It is recommended to change to smooth mode." msgstr "" -"Enabling traditional timelapse photography may cause surface imperfections. " -"It is recommended to change to smooth mode." +"L’activation de la photographie timelapse traditionnelle peut provoquer des " +"imperfections de surface. Il est recommandé de passer en mode fluide." -msgid "Expand sidebar" +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." msgstr "" +msgid "Expand sidebar" +msgstr "Agrandir la barre latérale" + msgid "Collapse sidebar" +msgstr "Réduire la barre latérale" + +msgid "Tab" msgstr "" #, c-format, boost-format msgid "Loading file: %s" -msgstr "Loading file: %s" +msgstr "Chargement du fichier : %s" msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "The 3mf is not supported by Snapmaker Orca, loading geometry data only." +msgstr "" +"Le fichier 3mf n’est pas supporté par Snapmaker Orca, chargement des données de " +"géométrie uniquement." msgid "Load 3mf" -msgstr "Load 3mf" +msgstr "Charger 3mf" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"La version %s du 3MF est plus récente que la version %s de %s. Les clés " +"suivantes ne sont pas reconnues:" msgid "You'd better upgrade your software.\n" -msgstr "You should update your software.\n" +msgstr "Vous feriez mieux de mettre à jour votre logiciel.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." +msgstr "" +"La version %s du 3MF est plus récente que la version %s de %s. Nous vous " +"suggérons de mettre à jour votre logiciel." + +msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." msgstr "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." msgid "Invalid values found in the 3mf:" -msgstr "Invalid values found in the 3mf:" +msgstr "Valeurs invalides trouvées dans le 3mf :" msgid "Please correct them in the param tabs" -msgstr "Please correct them in the Param tabs" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "The 3mf has following modified G-code in filament or printer presets:" +msgstr "Veuillez les corriger dans les onglets de paramètres" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3mf has the following modified G-code in filament or printer presets:" msgstr "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" - -msgid "Modified G-codes" -msgstr "Modified G-code" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "The 3mf has following customized filament or printer presets:" +"Le 3mf a les G-codes modifiés suivants dans le filament ou les préréglages " +"de l'imprimante :" +#, fuzzy msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "" +"Veuillez vous assurer que ces G-codes modifiés sont sûrs afin d'éviter tout " +"dommage à la machine !" + +msgid "Modified G-code" +msgstr "G-codes modifiés" + +msgid "The 3mf has the following customized filament or printer presets:" +msgstr "" +"Le 3mf dispose de filaments personnalisés ou de préréglages d'imprimante :" + +#, fuzzy +msgid "" +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Please confirm that the G-codes within these presets are safe to prevent any " -"damage to the machine!" +"Veuillez vous assurer que les G-codes de ces préréglages sont sûrs afin " +"d'éviter d'endommager la machine !" msgid "Customized Preset" -msgstr "Customized Preset" +msgstr "Préréglage personnalisé" msgid "Name of components inside step file is not UTF8 format!" -msgstr "Component name(s) inside step file not in UTF8 format!" +msgstr "" +"Le nom des composants à l'intérieur du fichier .step n'est pas au format " +"UTF8 !" msgid "The name may show garbage characters!" -msgstr "Because of unsupported text encoding, garbage characters may appear!" +msgstr "Le nom peut afficher des caractères inutiles !" msgid "Remember my choice." -msgstr "Remember my choice." +msgstr "Mémoriser mon choix." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "Failed loading file \"%1%\". An invalid configuration was found." +msgstr "" +"Échec du chargement du fichier \"%1%\". Une configuration invalide a été " +"trouvée." msgid "Objects with zero volume removed" -msgstr "Objects with zero volume removed" +msgstr "Objets avec zéro volume supprimé" msgid "The volume of the object is zero" -msgstr "The volume of the object is zero" +msgstr "Le volume de l'objet est nul" #, c-format, boost-format msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" -"The object from file %s is too small, and may be in meters or inches.\n" -" Do you want to scale to millimeters?" +"L'objet du fichier %s est trop petit, et peut-être en mètres ou en pouces. " +"Voulez-vous mettre à l'échelle en millimètres ?" msgid "Object too small" -msgstr "Object too small" +msgstr "Objet trop petit" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" -"This file contains several objects positioned at multiple heights.\n" -"Instead of considering them as multiple objects, should \n" -"the file be loaded as a single object with multiple parts?" +"Ce fichier contient plusieurs objets positionnés à différentes hauteurs.\n" +"Au lieu de les considérer comme des objets multiples, le fichier \n" +"doit-il être chargé en tant qu'objet unique avec plusieurs parties ?" msgid "Multi-part object detected" -msgstr "Multi-part object detected" +msgstr "Objet en plusieurs pièces détecté" msgid "Load these files as a single object with multiple parts?\n" -msgstr "Load these files as a single object with multiple parts?\n" +msgstr "" +"Charger ces fichiers en tant qu'objet unique avec plusieurs parties ?\n" msgid "Object with multiple parts was detected" -msgstr "An object with multiple parts was detected" +msgstr "Un objet en plusieurs parties a été détecté" -msgid "The file does not contain any geometry data." -msgstr "The file does not contain any geometry data." +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" -"Your object appears to be too large, Do you want to scale it down to fit the " + +msgid "The file does not contain any geometry data." +msgstr "Le fichier ne contient pas de données géométriques." + +msgid "" +"Your object appears to be too large, do you want to scale it down to fit the " "print bed automatically?" +msgstr "" +"Votre objet semble trop grand. Voulez-vous le réduire pour l'adapter " +"automatiquement au plateau d'impression ?" msgid "Object too large" -msgstr "Object too large" +msgstr "Objet trop grand" msgid "Export STL file:" -msgstr "Export STL file:" +msgstr "Exporter le fichier STL :" msgid "Export AMF file:" -msgstr "Export AMF file:" +msgstr "Exporter le fichier AMF :" msgid "Save file as:" -msgstr "Save file as" +msgstr "Enregistrer le fichier sous :" msgid "Export OBJ file:" -msgstr "Export OBJ file:" +msgstr "Exporter le fichier OBJ :" #, c-format, boost-format msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" -"The file %s already exists.\n" -"Do you want to replace it?" +"Le fichier %s existe déjà\n" +"Voulez-vous le remplacer ?" msgid "Confirm Save As" -msgstr "Confirm Save As" +msgstr "Confirmer Enregistrer sous" msgid "Delete object which is a part of cut object" -msgstr "Delete object which is a part of cut object" +msgstr "Supprimer l'objet qui fait partie de l'objet découpé" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"You are trying to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed." +"Vous essayez de supprimer un objet qui fait partie d'un objet coupé.\n" +"Cette action va rompre la correspondance entre les objets coupés.\n" +"Après cela, la cohérence du modèle ne peut plus être garantie." msgid "The selected object couldn't be split." -msgstr "The selected object couldn't be split." +msgstr "L'objet sélectionné n'a pas pu être divisé." msgid "Another export job is running." -msgstr "Another export job is running." +msgstr "Une autre tâche d'exportation est en cours d'exécution." msgid "Unable to replace with more than one volume" -msgstr "Unable to replace with more than one volume" +msgstr "Impossible de remplacer par plus d’un volume" msgid "Error during replace" -msgstr "Error during replacement" +msgstr "Erreur lors du remplacement" msgid "Replace from:" -msgstr "Replace from:" +msgstr "Remplacer par :" msgid "Select a new file" -msgstr "Select a new file" +msgstr "Sélectionnez un nouveau fichier" msgid "File for the replace wasn't selected" -msgstr "File for the replacement wasn't selected" +msgstr "Le fichier de remplacement n'a pas été sélectionné" + +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" msgid "Please select a file" -msgstr "Please select a file" +msgstr "Veuillez sélectionner un fichier" msgid "Do you want to replace it" -msgstr "Do you want to replace it?" +msgstr "Voulez-vous le remplacer ?" msgid "Message" msgstr "Message" msgid "Reload from:" -msgstr "Reload from:" +msgstr "Recharger depuis :" msgid "Unable to reload:" -msgstr "Unable to reload:" +msgstr "Impossible de recharger :" msgid "Error during reload" -msgstr "Error during reload" +msgstr "Erreur lors du rechargement" msgid "There are warnings after slicing models:" -msgstr "There are warnings after slicing models:" +msgstr "Il y a des avertissements après le découpage des modèles :" msgid "warnings" -msgstr "warnings" +msgstr "avertissements" msgid "Invalid data" -msgstr "Invalid data" +msgstr "Donnée non valide" msgid "Slicing Canceled" -msgstr "Slicing Canceled" +msgstr "Découpe annulée" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Slicing Plate %d" +msgstr "Découpe du plateau %d" msgid "Please resolve the slicing errors and publish again." -msgstr "Please resolve the slicing errors and publish again." +msgstr "Veuillez résoudre les erreurs de découpage et republier." msgid "" "Network Plug-in is not detected. Network related features are unavailable." msgstr "" -"Network Plug-in is not detected. Network related features are unavailable." +"Le plug-in réseau n'est pas détecté. Les fonctionnalités liées au réseau ne " +"sont pas disponibles." msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." +msgstr "" +"Mode de prévisualisation:\n" +"Le fichier chargé contient uniquement du G-code, impossible d'accéder à la " +"page de Préparation." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" msgstr "" -"Preview only mode:\n" -"The loaded file contains G-code only, cannot enter the Prepare page" msgid "You can keep the modified presets to the new project or discard them" -msgstr "You can keep the modified presets for the new project or discard them" +msgstr "" +"Vous pouvez conserver les préréglages modifiés dans le nouveau projet ou les " +"supprimer" msgid "Creating a new project" -msgstr "Creating a new project" +msgstr "Créer un nouveau projet" msgid "Load project" -msgstr "Load project" +msgstr "Charger le projet" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs open the " "project file." msgstr "" -"Failed to save the project.\n" -"Please check whether the folder exists online or if other programs have the " -"project file open." +"Impossible d'enregistrer le projet.\n" +"Vérifiez si le dossier existe en ligne ou si le fichier de projet est ouvert " +"dans d'autres programmes." msgid "Save project" -msgstr "Save project" +msgstr "Sauvegarder le projet" msgid "Importing Model" -msgstr "Importing Model" +msgstr "Importation du modèle" msgid "prepare 3mf file..." -msgstr "preparing 3mf file..." +msgstr "préparation du fichier 3mf..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "Échec du téléchargement, format de fichier inconnu." -msgid "downloading project ..." -msgstr "downloading project ..." +msgid "downloading project..." +msgstr "téléchargement du projet..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "Le téléchargement a échoué, exception de taille de fichier." #, c-format, boost-format msgid "Project downloaded %d%%" -msgstr "Project downloaded %d%%" +msgstr "" +"Projet téléchargé à %d%%L’importation dans Bambu Studio a échoué. Veuillez " +"télécharger le fichier et l’importer manuellement" msgid "" "Importing to Snapmaker Orca failed. Please download the file and manually " "import it." msgstr "" +"L’importation vers Snapmaker Orca a échoué. Veuillez télécharger le fichier et " +"l’importer manuellement." + +msgid "INFO:" +msgstr "INFO:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Aucune accélération n’est fournie pour l’étalonnage. Utiliser la valeur " +"d’accélération par défaut " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Aucune vitesse n’est fournie pour l’étalonnage. Utiliser la vitesse optimale " +"par défaut " msgid "Import SLA archive" -msgstr "" +msgstr "Importer les archives SLA" msgid "The selected file" -msgstr "The selected file" +msgstr "Le fichier sélectionné" -msgid "does not contain valid gcode." -msgstr "Does not contain valid G-code." +msgid "does not contain valid G-code." +msgstr "ne contient pas de G-code valide." msgid "Error occurs while loading G-code file" -msgstr "An Error has occurred while loading the G-code file." +msgstr "Une erreur se produit lors du chargement du fichier G-code" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "" +msgstr "Le chargement d’une archive ZIP se trouvant dans %1% a échoué." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" -msgstr "" +msgstr "Échec de la décompression du fichier vers %1% : %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "" +"Impossible de trouver le fichier décompressé dans %1%. La décompression du " +"fichier a échoué." msgid "Drop project file" -msgstr "Drop project file" +msgstr "Déposer le fichier de projet" msgid "Please select an action" -msgstr "Please select an action" +msgstr "Veuillez sélectionner une action" msgid "Open as project" -msgstr "Open as project" +msgstr "Ouvrir en tant que projet" msgid "Import geometry only" -msgstr "Import geometry only" +msgstr "Importer la géométrie uniquement" msgid "Only one G-code file can be opened at the same time." -msgstr "Only one G-code file can be opened at a time." +msgstr "Un seul fichier G-code peut être ouvert à la fois." msgid "G-code loading" -msgstr "G-code loading" +msgstr "Chargement du G-code" -msgid "G-code files can not be loaded with models together!" -msgstr "G-code files and models cannot be loaded together!" +msgid "G-code files cannot be loaded with models together!" +msgstr "" +"Les fichiers G-code ne peuvent pas être chargés avec des modèles ensemble !" -msgid "Can not add models when in preview mode!" -msgstr "Unable to add models in preview mode" +msgid "Cannot add models when in preview mode!" +msgstr "Impossible d'ajouter des modèles en mode aperçu !" msgid "All objects will be removed, continue?" -msgstr "All objects will be removed, continue?" +msgstr "Tous les objets seront supprimés, continuer ?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" -"The current project has unsaved changes. Would you like to save before " -"continuing?" +"Le projet en cours comporte des modifications non enregistrées, enregistrez-" +"les avant de continuer ?" msgid "Number of copies:" -msgstr "Number of copies:" +msgstr "Nombre de copies:" msgid "Copies of the selected object" -msgstr "Copies of the selected object" +msgstr "Copies de l'objet sélectionné" msgid "Save G-code file as:" -msgstr "Save G-code file as:" +msgstr "Sauvegarder le fichier G-code en tant que :" msgid "Save SLA file as:" -msgstr "Save SLA file as:" +msgstr "Enregistrer le fichier SLA sous :" msgid "The provided file name is not valid." -msgstr "The provided file name is not valid." +msgstr "Le nom de fichier fourni n’est pas valide." msgid "The following characters are not allowed by a FAT file system:" -msgstr "The following characters are not allowed by a FAT file system:" +msgstr "" +"Les caractères suivants ne sont pas autorisés par un système de fichiers " +"FAT :" msgid "Save Sliced file as:" -msgstr "Save Sliced file as:" +msgstr "Enregistrer le fichier découpé sous :" #, c-format, boost-format msgid "" "The file %s has been sent to the printer's storage space and can be viewed " "on the printer." msgstr "" -"The file %s has been sent to the printer's storage space and can be viewed " -"on the printer." +"Le fichier %s a été envoyé vers l'espace de stockage de l'imprimante et peut " +"être visualisé sur l'imprimante." + +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." +"Impossible d’effectuer une opération booléenne sur les mailles du modèle. " +"Seules les parties positives seront conservées. Vous pouvez corriger les " +"mailles et réessayer." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "Raison : la partie « %1% » est vide." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "Raison : la partie « %1% » n’est pas liée à un volume." #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "Raison : la partie « %1% » s’est auto-introduite." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "Raison : « %1% » et une autre partie n’ont pas d’intersection." msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" +"Impossible d'effectuer une opération booléenne sur les maillages du modèle. " +"Seules les parties positives seront exportées." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" +"L’imprimante est-elle prête ? Le plateau d’impression est-il en place, vide " +"et propre ?" msgid "Upload and Print" +msgstr "Envoyer & Imprimer" + +msgid "Abnormal print file data. Please slice again" msgstr "" +"Données de fichier d'impression anormales. Veuillez découper le fichier à " +"nouveau" msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" -"Print By Object: \n" -"We suggest using auto-arrange to avoid collisions when printing." +"Imprimer par objet :\n" +"Nous vous suggérons d'utiliser la disposition automatique pour éviter les " +"collisions lors de l'impression." msgid "Send G-code" -msgstr "Send G-code" +msgstr "Envoyer le G-code" msgid "Send to printer" -msgstr "Send to printer" +msgstr "Envoyer à l'imprimante" msgid "Custom supports and color painting were removed before repairing." -msgstr "Custom supports and color painting were removed before repairing." +msgstr "" +"Les supports personnalisés et la peinture de couleur ont été retirés avant " +"la réparation." msgid "Optimize Rotation" +msgstr "Optimiser la rotation" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." msgstr "" -msgid "Invalid number" -msgstr "Invalid number" +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" -msgstr "Plate Settings" +msgstr "Paramètres de la plaque" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Number of currently selected parts: %1%\n" +msgstr "Nombre de pièces actuellement sélectionnées : %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "Number of currently selected objects: %1%\n" +msgstr "Nombre d’objets actuellement sélectionnés : %1%\n" #, boost-format msgid "Part name: %1%\n" -msgstr "Part name: %1%\n" +msgstr "Nom de la pièce : %1%\n" #, boost-format msgid "Object name: %1%\n" -msgstr "Object name: %1%\n" +msgstr "Nom de l'objet : %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" -msgstr "Size: %1% x %2% x %3% in\n" +msgstr "Taille : %1% x %2% x %3% dans\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" -msgstr "Size: %1% x %2% x %3% mm\n" +msgstr "Taille : %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" -msgstr "Volume: %1% in³\n" +msgstr "Volume : %1% en³\n" #, boost-format msgid "Volume: %1% mm³\n" -msgstr "Volume: %1% mm³\n" +msgstr "Volume : %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" -msgstr "Triangles: %1%\n" - -msgid "Tips:" -msgstr "Tips:" +msgstr "Triangles : %1%\n" msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" +"La fonctionnalité \"Réparer le modèle\" n'est actuellement disponible que " +"sur Windows. Veuillez réparer le modèle sur Snapmaker Orca (Windows) ou avec " +"des logiciels de CAO." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"La plaque% d : %s n'est pas suggéré pour l'utilisation du filament " +"d'impression %s(%s). Si vous souhaitez toujours effectuer ce travail " +"d'impression, veuillez régler la température du plateau de ce filament sur " +"un nombre différent de zéro." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Plate% d: %s is not suggested for use printing filament %s(%s). If you still " -"want to do this print job, please set this filament's bed temperature to a " -"number that is not zero." msgid "Switching the language requires application restart.\n" -msgstr "Switching languages requires the application to restart.\n" +msgstr "Le changement de langue nécessite le redémarrage de l'application.\n" msgid "Do you want to continue?" -msgstr "Do you want to continue?" +msgstr "Voulez-vous continuer?" msgid "Language selection" -msgstr "Language selection" +msgstr "Sélection de la langue" msgid "Switching application language while some presets are modified." -msgstr "Switching application language while some presets are modified." +msgstr "" +"Changement de langue d’application alors que certaines présélections sont " +"modifiées." msgid "Changing application language" -msgstr "Changing application language" - -msgid "Changing the region will log out your account.\n" -msgstr "Changing the region will log you out of your account.\n" - -msgid "Region selection" -msgstr "Region selection" - -msgid "Second" -msgstr "Second" - -msgid "Browse" -msgstr "Browse" - -msgid "Choose Download Directory" -msgstr "Choose Download Directory" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "General Settings" +msgstr "Changer la langue de l'application" msgid "Asia-Pacific" -msgstr "Asia-Pacific" +msgstr "Asie-Pacifique" msgid "China" -msgstr "China" +msgstr "Chine" msgid "Europe" msgstr "Europe" msgid "North America" -msgstr "North America" +msgstr "Amérique du Nord" msgid "Others" -msgstr "Others" +msgstr "Autre" -msgid "Login Region" -msgstr "Login Region" +msgid "Changing the region will log out your account.\n" +msgstr "Si vous changez de région, vous serez déconnecté de votre compte.\n" -msgid "Stealth Mode" +msgid "Region selection" +msgstr "Choix de la région" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Période de sauvegarde en secondes." + +msgid "Bed Temperature Difference Warning" msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -msgid "Enable network plugin" +msgid "Browse" +msgstr "Parcourir" + +msgid "Choose folder for downloaded items" msgstr "" -msgid "Check for stable updates only" -msgstr "" +msgid "Choose Download Directory" +msgstr "Choisissez le répertoire de téléchargement" + +msgid "Associate" +msgstr "Associé" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "avec Snapmaker Orca afin qu’Orca puisse ouvrir des modèles à partir de" + +msgid "Current Association: " +msgstr "Association actuelle : " + +msgid "Current Instance" +msgstr "Instance courante" + +msgid "Current Instance Path: " +msgstr "Chemin d’accès à l’instance courante : " + +msgid "General" +msgstr "Général" msgid "Metric" -msgstr "Metric" +msgstr "Métrique" msgid "Imperial" -msgstr "Imperial" +msgstr "Impérial" msgid "Units" -msgstr "Units" +msgstr "Unités" + +msgid "Home" +msgstr "Accueil" + +msgid "Default page" +msgstr "Page par défaut" + +msgid "Set the page opened on startup." +msgstr "Définit la page ouverte au démarrage." + +msgid "Enable dark mode" +msgstr "Activer le mode Sombre" msgid "Allow only one Snapmaker Orca instance" -msgstr "" +msgstr "Autoriser une seule instance d’Snapmaker Orca" msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"On OSX there is always only one instance of app running by default. However " -"it is allowed to run multiple instances of same app from the command line. " -"In such case this setting will allow only one instance." +"Sous OSX, il n’y a toujours qu’une seule instance de l’application en cours " +"d’exécution par défaut. Cependant, il est possible de lancer plusieurs " +"instances de la même application à partir de la ligne de commande. Dans ce " +"cas, ces paramètres n’autorisent qu’une seule instance." msgid "" "If this is enabled, when starting Snapmaker Orca and another instance of the " "same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" +"Si cette option est activée, lorsque vous démarrez Snapmaker Orca et qu’une " +"autre instance du même Snapmaker Orca est déjà en cours d’exécution, cette " +"instance sera réactivée à la place." -msgid "Home" +msgid "Show splash screen" +msgstr "Afficher l'écran de démarrage" + +msgid "Show the splash screen during startup." +msgstr "Afficher l’écran de démarrage au démarrage." + +msgid "Downloads folder" msgstr "" -msgid "Default Page" +msgid "Target folder for downloaded items" msgstr "" -msgid "Set the page opened on startup." +msgid "Load All" +msgstr "Tout charger" + +msgid "Ask When Relevant" +msgstr "Demander quand c’est pertinent" + +msgid "Always Ask" +msgstr "Toujours demander" + +msgid "Load Geometry Only" +msgstr "Charger uniquement la géométrie" + +msgid "Load behaviour" +msgstr "Comportement du chargement" + +msgid "Should printer/filament/process settings be loaded when opening a .3mf?" msgstr "" +"Les paramètres de l’imprimante/du filament/du processus doivent-ils être " +"chargés lors de l’ouverture d’un fichier .3mf ?" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" +"Pas d'avertissement lors du chargement de 3MF avec des G-codes modifiés" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Sauvegarde automatique" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Sauvegardez votre projet périodiquement pour faciliter la restauration après " +"un plantage occasionnel." + +msgid "Preset" +msgstr "Préréglage" + +msgid "Remember printer configuration" +msgstr "Mémoriser la configuration de l’imprimante" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Si cette option est activée, Orca se souviendra de la configuration du " +"filament/processus pour chaque imprimante et la modifiera automatiquement." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Gestion multi appareils" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Si cette option est activée, vous pouvez envoyer une tâche à plusieurs " +"appareils en même temps et gérer plusieurs appareils." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Tous" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Arrangement automatique de la plaque après le clonage" msgid "Touchpad" -msgstr "" +msgstr "Pavé tactile" msgid "Camera style" -msgstr "" +msgstr "Style de caméra" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +"Sélectionner le style de navigation de l’appareil photo.\n" +"Par défaut : LMB+mouvement pour la rotation, RMB/MMB+mouvement pour le " +"panoramique.\n" +"Pavé tactile : Alt+mouvement pour la rotation, Shift+mouvement pour le " +"panoramique." + +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" msgid "Zoom to mouse position" -msgstr "Zoom to mouse position" +msgstr "Zoom sur la position de la souris" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." +"Zoomez sur la position du pointeur de la souris dans la vue 3D, plutôt que " +"sur le centre de la fenêtre 2D." msgid "Use free camera" -msgstr "" +msgstr "Utiliser la caméra libre" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" +"Si activée, utilise la caméra libre. Si désactivée, utilise la caméra " +"contrainte." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Échanger les boutons de panoramique et de rotation de la souris" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Si cette option est activée, les fonctions de panoramique et de rotation des " +"boutons gauche et droit de la souris sont échangées." msgid "Reverse mouse zoom" -msgstr "" +msgstr "Inverser le zoom de la souris" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" +"Si cette option est activée, elle inverse le sens du zoom avec la molette de " +"la souris." -msgid "Show splash screen" +msgid "Clear my choice on..." msgstr "" -msgid "Show the splash screen during startup." +msgid "Unsaved projects" msgstr "" -msgid "Show \"Tip of the day\" notification after start" -msgstr "Show \"Tip of the day\" notification after start" +msgid "Clear my choice on the unsaved projects." +msgstr "Efface mon choix sur les projets non enregistrés." -msgid "If enabled, useful hints are displayed at startup." -msgstr "If enabled, useful hints are displayed at startup." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Flushing volumes: Auto-calculate everytime the color changed." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "If enabled, auto-calculate every time the color changes." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" +msgid "Unsaved presets" msgstr "" -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" -msgstr "" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "Auto sync user presets (Printer/Filament/Process)" - -msgid "User Sync" -msgstr "User Sync" - -msgid "Update built-in Presets automatically." -msgstr "Update built-in presets automatically." - -msgid "System Sync" -msgstr "System Sync" - msgid "Clear my choice on the unsaved presets." -msgstr "Clear my choice on the unsaved presets." +msgstr "Efface mon choix sur les préréglages non enregistrés." + +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "Région d'origine" + +msgid "Stealth mode" +msgstr "Mode privé" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Cette fonction interrompt la transmission des données vers les services en " +"ligne de Bambu. Les utilisateurs qui n’utilisent pas de machines BBL ou qui " +"utilisent uniquement le mode LAN peuvent activer cette fonction en toute " +"sécurité." + +msgid "Network test" +msgstr "Test du réseau" + +msgid "Test" +msgstr "Tester" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Vérifier les mises à jour stables uniquement" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Synchronisation automatique des pré-réglages utilisateur (Imprimante/" +"Filament/Traitement)" + +msgid "Update built-in Presets automatically." +msgstr "Mettre à jour automatiquement les préréglages intégrés." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Activer le plug-in réseau" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" msgid "Associate files to Snapmaker Orca" -msgstr "Associate files to Snapmaker Orca" +msgstr "Associer des fichiers à Snapmaker Orca" msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Associate .3mf files to Snapmaker Orca" +msgstr "Associer les fichiers .3mf à Snapmaker Orca" msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" msgstr "" -"If enabled, this sets Snapmaker Orca as the default application to open .3mf " -"files." +"Si activé, définit Snapmaker Orca comme application par défaut pour ouvrir les " +"fichiers .3mf" msgid "Associate .stl files to Snapmaker Orca" -msgstr "Associate .stl files to Snapmaker Orca" +msgstr "Associer les fichiers .stl à Snapmaker Orca" msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" msgstr "" -"If enabled, this sets Snapmaker Orca as the default application to open .stl " -"files." +"Si activé, définit Snapmaker Orca comme application par défaut pour ouvrir les " +"fichiers .stl" msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Associate .step/.stp files to Snapmaker Orca" +msgstr "Associer les fichiers .step/.stp à Snapmaker Orca" msgid "If enabled, sets Snapmaker Orca as default application to open .step files" msgstr "" -"If enabled, this sets Snapmaker Orca as the default application to open .step " -"files." +"Si activé, définit Snapmaker Orca comme application par défaut pour ouvrir les " +"fichiers .step/.stp" msgid "Associate web links to Snapmaker Orca" +msgstr "Associer des liens web à Snapmaker Orca" + +msgid "Developer" msgstr "" -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "Maximum recent projects" - -msgid "Maximum count of recent projects" -msgstr "Maximum count of recent projects" - -msgid "Clear my choice on the unsaved projects." -msgstr "Clear my choice on the unsaved projects." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No warnings when loading 3MF with modified G-code" - -msgid "Auto-Backup" -msgstr "Auto-Backup" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Backup your project periodically to help with restoring from an occasional " -"crash." - -msgid "every" -msgstr "every" - -msgid "The peroid of backup in seconds." -msgstr "The period of backup in seconds." - -msgid "Downloads" -msgstr "Downloads" - -msgid "Dark Mode" -msgstr "Dark Mode" - -msgid "Enable Dark mode" -msgstr "Enable Dark Mode" - msgid "Develop mode" -msgstr "Developer mode" +msgstr "Mode Développeur" msgid "Skip AMS blacklist check" -msgstr "Skip AMS blacklist check" +msgstr "Ignorer la vérification de la liste noire AMS" -msgid "Home page and daily tips" -msgstr "Home page and daily tips" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Show home page on startup" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" -msgid "Sync settings" -msgstr "Sync settings" +msgid "Allow Abnormal Storage" +msgstr "" -msgid "User sync" -msgstr "User sync" - -msgid "Preset sync" -msgstr "Preset sync" - -msgid "Preferences sync" -msgstr "Preferences sync" - -msgid "View control settings" -msgstr "View control settings" - -msgid "Rotate of view" -msgstr "Rotate View" - -msgid "Move of view" -msgstr "Pan View" - -msgid "Zoom of view" -msgstr "Zoom View" - -msgid "Other" -msgstr "Other" - -msgid "Mouse wheel reverses when zooming" -msgstr "Reverse scroll direction while zooming" - -msgid "Enable SSL(MQTT)" -msgstr "Enable SSL(MQTT)" - -msgid "Enable SSL(FTP)" -msgstr "Enable SSL(FTP)" - -msgid "Internal developer mode" -msgstr "Internal developer mode" +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" msgid "Log Level" -msgstr "Log Level" +msgstr "Niveau de journalisation" msgid "fatal" -msgstr "fatal" +msgstr "mortel" msgid "error" -msgstr "error" +msgstr "erreur" msgid "warning" -msgstr "warning" +msgstr "attention" msgid "debug" -msgstr "debug" +msgstr "déboguer" msgid "trace" -msgstr "trace" +msgstr "tracé" + +msgid "Debug" +msgstr "" + +msgid "Sync settings" +msgstr "Paramètres de synchronisation" + +msgid "User sync" +msgstr "Synchronisation utilisateur" + +msgid "Preset sync" +msgstr "Synchronisation préréglée" + +msgid "Preferences sync" +msgstr "Synchronisation des préférences" + +msgid "View control settings" +msgstr "Afficher les paramètres de contrôle" + +msgid "Rotate of view" +msgstr "Rotation de la vue" + +msgid "Move of view" +msgstr "Déplacement de vue" + +msgid "Zoom of view" +msgstr "Vue agrandie" + +msgid "Other" +msgstr "Autre" + +msgid "Mouse wheel reverses when zooming" +msgstr "La molette de la souris s'inverse lors du zoom" + +msgid "Enable SSL(MQTT)" +msgstr "Activer SSL (MQTT)" + +msgid "Enable SSL(FTP)" +msgstr "Activer SSL (FTP)" + +msgid "Internal developer mode" +msgstr "Mode développeur interne" msgid "Host Setting" -msgstr "Host Setting" +msgstr "Paramètres de l'hôte" msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "DEV host: api-dev.bambu-lab.com/v1" +msgstr "Hôte DEV : api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "QA host: api-qa.bambu-lab.com/v1" +msgstr "Hôte AQ : api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "PRE host: api-pre.bambu-lab.com/v1" +msgstr "Hébergeur PRE : api-pre.bambu-lab.com/v1" msgid "Product host" -msgstr "Product host" +msgstr "Hôte du produit" msgid "debug save button" -msgstr "Debug save button" +msgstr "bouton d'enregistrement de débogage" msgid "save debug settings" -msgstr "save debug settings" +msgstr "enregistrer les paramètres de débogage" -msgid "DEBUG settings have saved successfully!" -msgstr "Debug settings have been saved successfully!" +msgid "DEBUG settings have been saved successfully!" +msgstr "Les paramètres DEBUG ont été enregistrés avec succès !" -msgid "Switch cloud environment, Please login again!" -msgstr "Cloud environment switched; please login again!" +msgid "Cloud environment switched, please login again!" +msgstr "L'environnement Cloud a changé, veuillez vous reconnecter !" msgid "System presets" -msgstr "System presets" +msgstr "Préréglages système" msgid "User presets" -msgstr "User presets" +msgstr "Préréglages utilisateur" msgid "Incompatible presets" -msgstr "Incompatible presets" +msgstr "Préréglages incompatibles" + +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" msgid "AMS filaments" -msgstr "AMS filament" +msgstr "Filaments AMS" -msgid "Click to pick filament color" -msgstr "Click to select filament color" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Please choose the filament color" +msgid "Click to select filament color" +msgstr "Cliquez pour choisir la couleur du filament" msgid "Add/Remove presets" -msgstr "Add/Remove presets" +msgstr "Ajouter/Supprimer des préréglages" msgid "Edit preset" -msgstr "Edit preset" +msgstr "Modifier le préréglage" msgid "Project-inside presets" -msgstr "Project-inside presets" +msgstr "Préréglages intégrés au projet" + +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" msgid "Add/Remove filaments" -msgstr "Add/Remove filament" +msgstr "Ajouter/Supprimer filament" msgid "Add/Remove materials" -msgstr "Add/Remove materials" +msgstr "Ajouter/Supprimer des matériaux" -msgid "Select/Remove printers(system presets)" -msgstr "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" +msgstr "Sélectionner/supprimer des imprimantes (préréglages du système)" msgid "Create printer" -msgstr "Create printer" +msgstr "Créer une imprimante" + +msgid "Empty" +msgstr "Vide" + +msgid "Incompatible" +msgstr "Incompatible" msgid "The selected preset is null!" -msgstr "The selected preset is null!" +msgstr "Le préréglage sélectionné est invalide !" msgid "End" -msgstr "End" +msgstr "Fin" msgid "Customize" -msgstr "Customize" +msgstr "Personnaliser" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "Séquence du filament de l’autre couche" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "Veuillez saisir la valeur de la couche (>= 2)." msgid "Plate name" -msgstr "Plate name" - -msgid "Same as Global Print Sequence" -msgstr "Same as Global Print Sequence" - -msgid "Print sequence" -msgstr "Print sequence" - -msgid "Same as Global" -msgstr "Same as Global" - -msgid "Disable" -msgstr "Disable" - -msgid "Spiral vase" -msgstr "Spiral vase" - -msgid "First layer filament sequence" -msgstr "First layer filament sequence" +msgstr "Nom de la plaque" msgid "Same as Global Plate Type" -msgstr "Same as Global Plate Type" +msgstr "Identique au type de plaque général" + +msgid "Bed type" +msgstr "Type de plaque" + +msgid "Same as Global Print Sequence" +msgstr "Identique à la séquence d'impression globale" + +msgid "Print sequence" +msgstr "Séquence d'impression" + +msgid "Same as Global" +msgstr "Identique à Global" + +msgid "Disable" +msgstr "Désactiver" + +msgid "Spiral vase" +msgstr "Vase spirale" + +msgid "First layer filament sequence" +msgstr "Séquence d’impression de la première couche" msgid "Same as Global Bed Type" -msgstr "Same as Global Plate Type" +msgstr "Identique au type de plateau général" msgid "By Layer" -msgstr "By Layer" +msgstr "Par Couche" msgid "By Object" -msgstr "By Object" +msgstr "Par Objet" msgid "Accept" -msgstr "Accept" +msgstr "Accepter" msgid "Log Out" -msgstr "Log Out" +msgstr "Déconnexion" msgid "Slice all plate to obtain time and filament estimation" -msgstr "Slice all plates to obtain time and filament estimation" +msgstr "" +"Découpez toutes les couches pour obtenir une estimation du temps et du " +"filament" msgid "Packing project data into 3mf file" -msgstr "Packing project data into 3mf file" +msgstr "Compression des données du projet dans un fichier 3mf" msgid "Uploading 3mf" -msgstr "Uploading 3mf" +msgstr "Téléversement 3mf" msgid "Jump to model publish web page" -msgstr "Jump to model publish web page" +msgstr "Accéder à la page internet de publication des modèles" -msgid "Note: The preparation may takes several minutes. Please be patiant." -msgstr "Note: The preparation may take several minutes. Please be patient." +msgid "Note: The preparation may take several minutes. Please be patient." +msgstr "" +"Remarque : La préparation peut prendre plusieurs minutes. Veuillez patienter." msgid "Publish" -msgstr "Publish" +msgstr "Publier" -msgid "Publish was cancelled" -msgstr "Publish was cancelled" +msgid "Publish was canceled" +msgstr "La publication a été annulée" msgid "Slicing Plate 1" -msgstr "Slicing Plate 1" +msgstr "Découper Plaque 1" msgid "Packing data to 3mf" -msgstr "Packing data to 3mf" +msgstr "Collecte des données 3mf" msgid "Jump to webpage" -msgstr "Jump to webpage" +msgstr "Ouvrir la page internet" #, c-format, boost-format msgid "Save %s as" -msgstr "Save %s as" +msgstr "Enregistrer %s sous" msgid "User Preset" -msgstr "User Preset" +msgstr "Préréglage utilisateur" msgid "Preset Inside Project" -msgstr "Preset Inside Project" +msgstr "Projeter à l'intérieur du préréglage" msgid "Name is unavailable." -msgstr "Name is unavailable." +msgstr "Le nom n'est pas disponible." -msgid "Overwrite a system profile is not allowed" -msgstr "Overwriting a system profile is not allowed." +msgid "Overwriting a system profile is not allowed." +msgstr "Remplacer un profil système n'est pas autorisé" #, boost-format msgid "Preset \"%1%\" already exists." -msgstr "Preset \"%1%\" already exists." +msgstr "Le préréglage \"%1%\" existe déjà." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "" +msgid "" "Preset \"%1%\" already exists and is incompatible with the current printer." +msgstr "" +"Le préréglage \"%1%\" existe déjà et est incompatible avec l'imprimante " +"actuelle." -msgid "Please note that saving action will replace this preset" -msgstr "Please note that saving will overwrite the current preset." +#, fuzzy +msgid "Please note that saving will overwrite this preset." +msgstr "Veuillez noter que l'action d'enregistrement remplacera ce préréglage" msgid "The name cannot be the same as a preset alias name." -msgstr "The name cannot be the same as a preset alias name." +msgstr "Le nom ne peut pas être le même qu'un nom d'alias prédéfini." msgid "Save preset" -msgstr "Save preset" +msgstr "Enregistrer le préréglage" msgctxt "PresetName" msgid "Copy" -msgstr "Copy" +msgstr "Copie" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "Printer \"%1%\" is selected with preset \"%2%\"" +msgstr "L'imprimante \"%1%\" est sélectionnée avec le préréglage \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Please choose an action with \"%1%\" preset after saving." +msgstr "" +"Veuillez choisir une action avec le préréglage \"%1%\" après " +"l'enregistrement." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "For \"%1%\", change \"%2%\" to \"%3%\" " +msgstr "Pour \"%1%\", remplacez \"%2%\" par \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "For \"%1%\", add \"%2%\" as a new preset" +msgstr "Pour \"%1%\", ajoutez \"%2%\" comme nouveau préréglage" #, boost-format msgid "Simply switch to \"%1%\"" -msgstr "Simply switch to \"%1%\"" +msgstr "Passez simplement à \"%1%\"" msgid "Task canceled" -msgstr "Task canceled" - -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Search" - -msgid "My Device" -msgstr "My Device" - -msgid "Other Device" -msgstr "Other Device" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Input access code" - -msgid "Can't find my devices?" -msgstr "Can't find devices?" - -msgid "Log out successful." -msgstr "Log out successful." - -msgid "Busy" -msgstr "Busy" +msgstr "Tâche annulée" msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate" +msgstr "Plateau Cool Plate" msgid "PLA Plate" -msgstr "PLA Plate" +msgstr "Plaque PLA" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "" msgid "Bambu Smooth PEI Plate" msgstr "" msgid "High temperature Plate" -msgstr "High temperature Plate" +msgstr "Plateau haute température" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" -msgstr "Send print job to" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "Flow Dynamics Calibration" +msgstr "Calibration du débit" -msgid "Click here if you can't connect to the printer" -msgstr "Click here if you can't connect to the printer" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" -msgstr "Send complete" +msgstr "envoi terminé" msgid "Error code" -msgstr "Error code" +msgstr "Code erreur" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "No login account, only printers in LAN mode are displayed" - -msgid "Connecting to server" -msgstr "Connecting to server" - -msgid "Synchronizing device information" -msgstr "Synchronizing device information" - -msgid "Synchronizing device information time out" -msgstr "Synchronizing device information timed out" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "Cannot send a print job while the printer is updating firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" +msgid "High Flow" msgstr "" -"The printer is executing instructions. Please restart printing after it ends" - -msgid "The printer is busy on other print job" -msgstr "The printer is busy with another print job." #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" #, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" -"Filament %s does not match the filament in AMS slot %s. Please update the " -"printer firmware to support AMS slot assignment." +"Le filament %s ne correspond pas au filament de l'emplacement AMS %s. " +"Veuillez mettre à jour le firmware de l'imprimante pour qu'il prenne en " +"charge l'attribution des emplacements AMS." msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" -"Filament does not match the filament in AMS slot. Please update the printer " -"firmware to support AMS slot assignment." - -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." - -msgid "An SD card needs to be inserted before printing." -msgstr "A MicroSD card needs to be inserted before printing." +"Le filament ne correspond pas au filament du slot AMS. Veuillez mettre à " +"jour le firmware de l'imprimante pour qu'il prenne en charge l'attribution " +"des emplacements AMS." #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "A MicroSD card needs to be inserted to record a timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "Cannot send the print job to a printer whose firmware must be updated." - -msgid "Cannot send the print job for empty plate" -msgstr "Cannot send a print job for an empty plate." - -msgid "This printer does not support printing all plates" -msgstr "This printer does not support printing all plates" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"When spiral vase mode is enabled, machines with I3 structure will not " -"generate timelapse videos." +"Lorsque vous activez le mode vase, les machines avec une structure I3 ne " +"généreront pas de vidéos timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse is not supported because Print sequence is set to \"By object\"." msgid "Errors" -msgstr "Errors" - -msgid "Please check the following:" -msgstr "Please check the following:" +msgstr "Erreurs" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" + +msgid "" +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." +"Le type d'imprimante sélectionné lors de la génération du G-Code n'est pas " +"cohérent avec l'imprimante actuellement sélectionnée. Il est recommandé " +"d'utiliser le même type d'imprimante pour la découpe." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " "they are the required filaments. If they are okay, press \"Confirm\" to " "start printing." msgstr "" -"There are some unknown filaments in the AMS mappings. Please check whether " -"they are the required filaments. If they are okay, click \"Confirm\" to " -"start printing." +"Il y a quelques filaments inconnus dans les association avec l'AMS. Veuillez " +"vérifier s'il s'agit des filaments nécessaires. S'ils sont corrects, cliquez " +"sur \"Confirmer\" pour lancer l'impression." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "nozzle in preset: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "nozzle memorized: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" +msgstr "Veuillez vérifier les points suivants :" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" +"Veuillez corriger l’erreur ci-dessus, sinon l’impression ne pourra pas se " +"poursuivre." msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Please click the confirm button if you still want to proceed with printing." +"Cliquez sur le bouton de confirmation si vous souhaitez continuer à imprimer." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Connecting to the printer. Unable to cancel during the connection process." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatic flow calibration using Micro Lidar" +msgid "Preparing print job" +msgstr "Préparation du travail d'impression" -msgid "Modifying the device name" -msgstr "Modifying the device name" +msgid "The name length exceeds the limit." +msgstr "La longueur du nom dépasse la limite." -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Send to Printer MicroSD card" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Connexion impossible à l’imprimante" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Pas de connexion au cloud, seules les imprimantes en mode LAN sont affichées." + +msgid "Connecting to server..." +msgstr "Connexion au serveur…" + +msgid "Synchronizing device information..." +msgstr "Synchronisation des informations sur l'appareil…" + +msgid "Synchronizing device information timed out." +msgstr "Expiration du délai de synchronisation des informations sur " +"l'appareil." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Impossible d'envoyer une tâche d'impression pendant la mise à jour du " +"firmware de l'imprimante." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"L'imprimante exécute des instructions. Veuillez recommencer l'impression " +"après la fin de l'exécution." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Impossible d'envoyer la tâche d'impression à une imprimante dont le firmware " +"doit être mis à jour." + +msgid "Cannot send a print job for an empty plate." +msgstr "Impossible d'envoyer une tâche d'impression d'un plateau vide" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "" +"Cette imprimante ne prend pas en charge l'impression de toutes les plaques." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" -msgstr "Cannot send print tasks when an update is in progress" +msgstr "" +"Impossible d'envoyer la tâche d'impression lorsque la mise à niveau est en " +"cours" msgid "The selected printer is incompatible with the chosen printer presets." -msgstr "The selected printer is incompatible with the chosen printer presets." - -msgid "An SD card needs to be inserted before send to printer SD card." msgstr "" -"A MicroSD card needs to be inserted before sending to the printer SD card." +"L’imprimante sélectionnée est incompatible avec les préréglages d’imprimante " +"choisis." + +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." -msgstr "The printer is required to be on the same LAN as Snapmaker Orca." +msgstr "L'imprimante doit être sur le même réseau local que Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "The printer does not support sending to printer MicroSD card." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." -msgstr "Slice complete" +msgstr "Découpe terminée." msgid "View all Daily tips" -msgstr "View all Daily tips" +msgstr "Voir toutes les Astuces quotidiennes" msgid "Failed to create socket" -msgstr "Failed to create socket" +msgstr "Échec de la création du socket" msgid "Failed to connect socket" -msgstr "Failed to connect socket" +msgstr "Impossible de connecter le socket" msgid "Failed to publish login request" -msgstr "Failed to publish login request" +msgstr "Échec de la publication de la demande de connexion" msgid "Get ticket from device timeout" -msgstr "Timeout getting ticket from device" +msgstr "Dépassement du délai d'obtention d'un ticket depuis l'appareil" msgid "Get ticket from server timeout" -msgstr "Timeout getting ticket from server" +msgstr "Dépassement du délai d'obtention d'un ticket depuis le serveur" msgid "Failed to post ticket to server" -msgstr "Failed to post ticket to server" +msgstr "Échec de l'envoi du ticket au serveur" msgid "Failed to parse login report reason" -msgstr "Failed to parse login report reason" +msgstr "Échec de l'analyse du rapport de connexion" msgid "Receive login report timeout" -msgstr "Receive login report timeout" +msgstr "Délai d'expiration du rapport de connexion" msgid "Unknown Failure" -msgstr "Unknown Failure" +msgstr "Erreur inconnue" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." +"Veuillez trouver le code pin dans la page Compte sur l’écran de " +"l’imprimante,\n" +" et tapez le code pin ci-dessous." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "Vous ne trouvez pas le code pin ?" msgid "Pin Code" -msgstr "Pin Code" +msgstr "Code pin" msgid "Binding..." -msgstr "Binding..." +msgstr "Liaison…" msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "Veuillez confirmer sur l’écran de l’imprimante" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "La connexion a échoué. Veuillez vérifier le code pin." msgid "Log in printer" -msgstr "Log in printer" +msgstr "Connectez-vous à l'imprimante" -msgid "Would you like to log in this printer with current account?" -msgstr "Would you like to log in this printer with the current account?" +msgid "Would you like to log in to this printer with the current account?" +msgstr "" +"Souhaitez-vous vous connecter à cette imprimante avec un compte courant ?" msgid "Check the reason" -msgstr "Check the reason" +msgstr "Vérifier le motif" msgid "Read and accept" -msgstr "Read and accept" +msgstr "Lire et accepter" msgid "Terms and Conditions" -msgstr "Terms and Conditions" +msgstr "Termes et conditions" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " "device, please read the terms and conditions. By clicking to agree to use " "your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " "Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" +"Nous vous remercions d'avoir acheté un produit Bambu Lab. Avant d'utiliser " +"votre appareil Bambu Lab, veuillez lire les conditions générales. En " +"cliquant pour confirmer que vous acceptez d'utiliser votre appareil Bambu " +"Lab, vous vous engagez à respecter la politique de confidentialité et les " +"conditions d'utilisation (collectivement, les \"conditions\"). Si vous ne " +"respectez pas ou n'acceptez pas la politique de confidentialité de Bambu " +"Lab, veuillez ne pas utiliser les produits et services de Bambu Lab." msgid "and" -msgstr "and" +msgstr "et" msgid "Privacy Policy" -msgstr "Privacy Policy" +msgstr "Politique de Confidentialité" msgid "We ask for your help to improve everyone's printer" -msgstr "We ask for your help to improve everyone's printer" +msgstr "" +"Nous vous demandons de nous aider à améliorer l'imprimante de toute la " +"communauté" msgid "Statement about User Experience Improvement Program" -msgstr "Statement about User Experience Improvement Program" +msgstr "" +"Déclaration sur le programme d'amélioration de l'expérience utilisateur" #, c-format, boost-format msgid "" @@ -7304,166 +8868,205 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"Au sein de la communauté de l'impression 3D, nous apprenons des succès et " +"des échecs de chacun pour ajuster nos propres paramètres et réglages de " +"découpage. %s suit le même principe et utilise l'apprentissage automatique " +"pour améliorer ses performances en fonction des succès et des échecs du " +"grand nombre d'impressions effectuées par nos utilisateurs. Nous entraînons " +"%s à devenir plus intelligent en leur fournissant les données du monde réel. " +"Si vous le souhaitez, ce service accèdera aux informations de vos journaux " +"d'erreurs et de vos journaux d'utilisation, qui peuvent inclure des " +"informations décrites dans la Politique de confidentialité. Nous ne " +"collecterons aucune donnée personnelle permettant d'identifier une personne " +"directement ou indirectement, y compris, mais sans s'y limiter, les noms, " +"les adresses, les informations de paiement ou les numéros de téléphone. En " +"activant ce service, vous acceptez ces conditions et la déclaration " +"concernant la politique de confidentialité." msgid "Statement on User Experience Improvement Plan" -msgstr "Statement on User Experience Improvement Plan" +msgstr "" +"Déclaration concernant le plan d'amélioration de l'expérience utilisateur" msgid "Log in successful." -msgstr "Log in successful." +msgstr "Connexion réussie." msgid "Log out printer" -msgstr "Log out printer" +msgstr "Déconnecter l'imprimante" msgid "Would you like to log out the printer?" -msgstr "Would you like to log out the printer?" +msgstr "Souhaitez-vous déconnecter l'imprimante ?" msgid "Please log in first." -msgstr "Please log in first." +msgstr "S'il vous plait Connectez-vous d'abord." msgid "There was a problem connecting to the printer. Please try again." -msgstr "There was a problem connecting to the printer. Please try again." +msgstr "" +"Un problème est survenu lors de la connexion à l'imprimante. Veuillez " +"réessayer." msgid "Failed to log out." -msgstr "Failed to log out." +msgstr "Échec de la déconnexion." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" -msgstr "Save current %s" +msgstr "Enregistrer l'état actuel %s" msgid "Delete this preset" -msgstr "Delete this preset" +msgstr "Supprimer ce préréglage" msgid "Search in preset" -msgstr "Search in preset" +msgstr "Rechercher dans le préréglage" msgid "Click to reset all settings to the last saved preset." -msgstr "Click to reset all settings to the last saved preset." +msgstr "" +"Cliquez pour rétablir tous les paramètres au dernier préréglage enregistré." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"A Prime tower is required for smooth timeplase mode. There may be flaws on " -"the model without a prime tower. Are you sure you want to disable the prime " -"tower?" +"Une tour d’amorçage est requise pour le mode Timeplase fluide. Il peut y " +"avoir des défauts sur le modèle sans tour de purge. Êtes-vous sûr de vouloir " +"la désactiver ?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"A prime tower is required for smooth timelapse mode. There may be flaws on " -"the model without prime tower. Do you want to enable the prime tower?" +"Une tour d’amorçage est requise pour un mode timelapse fluide. Il peut y " +"avoir des défauts sur le modèle sans tour de purge. Voulez-vous activer la " +"désactiver?" msgid "Still print by object?" -msgstr "Still print by object?" +msgstr "Vous imprimez toujours par objet ?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Lorsque vous utilisez du matériel de support pour l'interface de support, " +"nous vous recommandons d'utiliser les paramètres suivants :\n" +"Distance Z supérieure nulle, espacement d'interface nul, motif " +"concentrique et désactivation de la hauteur indépendante de la couche de " +"support." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Change these settings automatically? \n" -"Yes - Change these settings automatically.\n" -"No - Do not change these settings for me." +"Vous souhaitez modifier ces paramètres automatiquement ?\n" +"Oui - Modifiez ces paramètres automatiquement\n" +"Non - Ne modifiez pas ces paramètres pour moi" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"When using support material for the support interface, we recommend the " -"following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" msgid "" "Enabling this option will modify the model's shape. If your print requires " "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" +"L’activation de cette option modifie la forme du modèle. Si votre impression " +"nécessite des dimensions précises ou fait partie d’un assemblage, il est " +"important de vérifier si ce changement de géométrie a un impact sur la " +"fonctionnalité de votre impression." msgid "Are you sure you want to enable this option?" +msgstr "Êtes-vous sûr de vouloir activer cette option ?" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" msgstr "" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" +"La hauteur du calque est trop faible.\n" +"Elle sera définie à min_layer_height\n" +"\n" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" -"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"La hauteur de la couche dépasse la limite fixée dans Paramètres de " +"l’imprimante -> Extrudeur -> Limites de la hauteur de la couche, ce qui peut " +"entraîner des problèmes de qualité d’impression." -msgid "Adjust to the set range automatically? \n" -msgstr "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "S’ajuster automatiquement à la plage définie ?\n" msgid "Adjust" -msgstr "Adjust" +msgstr "Ajuster" msgid "Ignore" -msgstr "Ignore" +msgstr "Ignorer" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" +"Fonction expérimentale : Rétracter et couper le filament à une plus grande " +"distance lors des changements de filament afin de minimiser le rinçage. Bien " +"que cela puisse réduire considérablement le rinçage, cela peut également " +"augmenter le risque de bouchage des buses ou d’autres complications " +"d’impression." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" +"Fonction expérimentale : Rétracter et couper le filament à une plus grande " +"distance lors des changements de filament afin de minimiser l’affleurement. " +"Bien que cela puisse réduire sensiblement l’affleurement, cela peut " +"également augmenter le risque d’obstruction des buses ou d’autres " +"complications d’impression. Veuillez utiliser le dernier micrologiciel de " +"l’imprimante." msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7471,100 +9074,190 @@ msgid "" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"When recording timelapse without toolhead, it is recommended to add a " -"\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " +"d’ajouter une \"Tour d’essuyage timelapse\".\n" +"en faisant un clic droit sur un emplacement vide sur le plateau et en " +"choisissant \"Ajouter Primitive\"-> \"Tour d’essuyage timelapse\"." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Une copie du préréglage actuel du système est créée et détachée du " +"préréglage du système." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Le préréglage personnalisé actuel sera détaché du préréglage du système " +"parent." + +msgid "Modifications to the current profile will be saved." +msgstr "Les modifications apportées au profil actuel sont enregistrées." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Cette action n’est pas réversible.\n" +"Voulez-vous continuer ?" + +msgid "Detach preset" +msgstr "Détacher la présélection" + +msgid "This is a default preset." +msgstr "Il s’agit d’un préréglage par défaut." + +msgid "This is a system preset." +msgstr "Il s’agit d’un préréglage du système." + +msgid "Current preset is inherited from the default preset." +msgstr "Le préréglage actuel est hérité du préréglage par défaut." + +msgid "Current preset is inherited from" +msgstr "Le préréglage actuel est hérité de" + +msgid "It can't be deleted or modified." +msgstr "Il ne peut être ni supprimé ni modifié." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Toute modification doit être enregistrée sous la forme d’un nouveau " +"préréglage hérité de celui-ci." + +msgid "To do that please specify a new name for the preset." +msgstr "Pour ce faire, veuillez spécifier un nouveau nom pour le préréglage." + +msgid "Additional information:" +msgstr "Informations complémentaires :" + +msgid "vendor" +msgstr "vendeur" + +msgid "printer model" +msgstr "modèle d’imprimante" + +msgid "default print profile" +msgstr "profil d’impression par défaut" + +msgid "default filament profile" +msgstr "profil de filament par défaut" + +msgid "default SLA material profile" +msgstr "profil de matériau SLA par défaut" + +msgid "default SLA print profile" +msgstr "profil d’impression SLA par défaut" + +msgid "full profile name" +msgstr "nom complet du profil" + +msgid "symbolic profile name" +msgstr "nom symbolique du profil" msgid "Line width" -msgstr "Line width" +msgstr "Largeur de ligne" msgid "Seam" -msgstr "Seam" +msgstr "Couture" msgid "Precision" -msgstr "Precision" +msgstr "Précision" msgid "Wall generator" -msgstr "Wall generator" +msgstr "Générateur de paroi" msgid "Walls and surfaces" -msgstr "" +msgstr "Parois et surfaces" msgid "Bridging" -msgstr "" +msgstr "Ponts" msgid "Overhangs" -msgstr "" +msgstr "Surplombs" msgid "Walls" -msgstr "Walls" +msgstr "Parois" msgid "Top/bottom shells" -msgstr "Top/bottom shells" +msgstr "Coques supérieures/inférieures" msgid "Initial layer speed" -msgstr "First layer speed" +msgstr "Vitesse de couche initiale" msgid "Other layers speed" -msgstr "Other layers speed" +msgstr "Autres couches" msgid "Overhang speed" -msgstr "Overhang speed" +msgstr "Vitesse de surplomb" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"This is the speed for various overhang degrees. Overhang degrees are " -"expressed as a percentage of line width. 0 speed means no slowing down for " -"the overhang degree range and wall speed is used" +"Il s'agit de la vitesse pour différents degrés de surplomb. Les degrés de " +"surplomb sont exprimés en pourcentage de la largeur de la ligne. 0 vitesse " +"signifie qu'il n'y a pas de ralentissement pour la plage de degrés du " +"surplomb et que la vitesse par défaut des périmètres est utilisée" msgid "Bridge" -msgstr "Bridge" +msgstr "Pont" msgid "Set speed for external and internal bridges" -msgstr "" +msgstr "Définir la vitesse pour les ponts externes et internes" msgid "Travel speed" -msgstr "Travel speed" +msgstr "Vitesse de déplacement" msgid "Acceleration" -msgstr "Acceleration" +msgstr "Accélération" msgid "Jerk(XY)" -msgstr "Jerk(XY)" +msgstr "Jerk (X-Y)" msgid "Raft" -msgstr "Raft" +msgstr "Radeau" msgid "Support filament" -msgstr "Filament for Supports" +msgstr "Filament de support" + +msgid "Support ironing" +msgstr "" msgid "Tree supports" -msgstr "" +msgstr "Supports arborescents" -msgid "Skirt" -msgstr "" +msgid "Multimaterial" +msgstr "Multi-matériaux" msgid "Prime tower" -msgstr "Prime tower" +msgstr "Tour d’amorçage" + +msgid "Filament for Features" +msgstr "Filament pour les caractéristiques" + +msgid "Ooze prevention" +msgstr "Prévention des suintements" + +msgid "Skirt" +msgstr "Jupe" msgid "Special mode" -msgstr "Special mode" +msgstr "Mode spécial" msgid "G-code output" -msgstr "G-code output" +msgstr "Sortie G-code" msgid "Post-processing Scripts" -msgstr "Post-processing Scripts" +msgstr "Scripts de post-traitement" msgid "Notes" msgstr "Notes" msgid "Frequent" -msgstr "Frequent" +msgstr "Fréquent" #, c-format, boost-format msgid "" @@ -7576,114 +9269,121 @@ msgid_plural "" "Please remove them, or will beat G-code visualization and printing time " "estimation." msgstr[0] "" -"Following line %s contains reserved keywords.\n" -"Please remove it, or G-code visualization and print time estimation will be " -"broken." +"La ligne suivante %s contient des mots clés réservés. Veuillez le supprimer, " +"ou il battra la visualisation du G-code et l'estimation du temps " +"d'impression." msgstr[1] "" -"Following lines %s contain reserved keywords.\n" -"Please remove them, or G-code visualization and print time estimation will " -"be broken." +"La ligne suivante %s contient des mots clés réservés. Veuillez le supprimer, " +"ou il battra la visualisation du G-code et l'estimation du temps " +"d'impression." msgid "Reserved keywords found" -msgstr "Reserved keywords found" +msgstr "Mots clés réservés trouvés" msgid "Setting Overrides" -msgstr "Setting Overrides" +msgstr "Forçage des réglages" msgid "Retraction" -msgstr "Retraction" +msgstr "Rétraction" msgid "Basic information" -msgstr "Basic information" +msgstr "Informations de base" msgid "Recommended nozzle temperature" -msgstr "Recommended nozzle temperature" +msgstr "Température de buse recommandée" msgid "Recommended nozzle temperature range of this filament. 0 means no set" -msgstr "Recommended nozzle temperature range of this filament. 0 means not set" +msgstr "" +"Plage de température de buse recommandée pour ce filament. 0 signifie pas " +"d'ensemble" + +msgid "Flow ratio and Pressure Advance" +msgstr "Rapport de débit et avance de pression" msgid "Print chamber temperature" -msgstr "" +msgstr "Température du caisson d’impression" msgid "Print temperature" -msgstr "Print temperature" - -msgid "Nozzle" -msgstr "Nozzle" - -msgid "Left Nozzle" -msgstr "Left Nozzle" - -msgid "Right Nozzle" -msgstr "Right Nozzle" +msgstr "Température d'impression" msgid "Nozzle temperature when printing" -msgstr "Nozzle temperature when printing" +msgstr "Température de la buse lors de l'impression" -msgid "Cool plate" -msgstr "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Cool Plate (SuperTack)" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." msgstr "" -"This is the bed temperature when the cool plate is installed. A value of 0 " -"means the filament does not support printing on the Cool Plate." -msgid "Textured Cool plate" -msgstr "" +msgid "Cool Plate" +msgstr "Cool Plate/Plaque PLA" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" +"Il s'agit de la température du plateau lorsque la plaque \"Cool plate\" est " +"installée. Une valeur à 0 signifie que ce filament ne peut pas être imprimé " +"sur la plaque Cool Plate" -msgid "Engineering plate" -msgstr "Engineering plate" +msgid "Textured Cool Plate" +msgstr "Plaque Cool plate texturée" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"This is the bed temperature when the engineering plate is installed. A value " -"of 0 means the filament does not support printing on the Engineering Plate." +"Température du plateau lorsque la plaque Cool plate est installée. La valeur " +"0 signifie que le filament ne peut pas être imprimé sur la plaque Cool Plate " +"texturée" + +msgid "Engineering Plate" +msgstr "Plaque Engineering" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "" +"Il s'agit de la température du plateau lorsque la plaque Engineering est " +"installée. Une valeur à 0 signifie que ce filament ne peut pas être imprimé " +"sur la plaque Engineering." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Smooth PEI Plate / High Temp Plate" +msgstr "Plateau PEI lisse / Plateau haute température" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Température du plateau lorsque le Plateau PEI lisse / haute température est " +"installé. Une valeur à 0 signifie que le filament ne prend pas en charge " +"l'impression sur le plateau PEI lisse/haute température" msgid "Textured PEI Plate" -msgstr "Textured PEI Plate" +msgstr "Plaque PEI texturée" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Bed temperature when Textured PEI Plate is installed. 0 means the filament " -"is not supported on the Textured PEI Plate" +"Température du plateau lorsque la plaque PEI texturée est installée. La " +"valeur 0 signifie que le filament n'est pas supporté par la plaque PEI " +"texturée" msgid "Volumetric speed limitation" -msgstr "Volumetric speed limitation" - -msgid "Cooling" -msgstr "Cooling" +msgstr "Limitation de vitesse volumétrique" msgid "Cooling for specific layer" -msgstr "Cooling for specific layer" +msgstr "Refroidissement pour une couche spécifique" msgid "Part cooling fan" -msgstr "Part cooling fan" +msgstr "Ventilateur de refroidissement des pièces" msgid "Min fan speed threshold" -msgstr "Min fan speed threshold" +msgstr "Seuil de vitesse mini du ventilateur" msgid "" "Part cooling fan speed will start to run at min speed when the estimated " @@ -7691,488 +9391,716 @@ msgid "" "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"The part cooling fan will run at the minimum fan speed when the estimated " -"layer time is longer than the threshold value. When the layer time is " -"shorter than the threshold, the fan speed will be interpolated between the " -"minimum and maximum fan speed according to layer printing time." +"La vitesse du ventilateur de refroidissement des pièces commencera à " +"fonctionner à la vitesse minimale lorsque le temps de couche estimé n'est " +"pas supérieur au temps de couche dans le réglage. Lorsque le temps de couche " +"est inférieur au seuil, la vitesse du ventilateur est interpolée entre la " +"vitesse minimale et maximale du ventilateur en fonction du temps " +"d'impression de la couche" msgid "Max fan speed threshold" -msgstr "Max fan speed threshold" +msgstr "Seuil de vitesse maximale du ventilateur" msgid "" "Part cooling fan speed will be max when the estimated layer time is shorter " "than the setting value" msgstr "" -"The part cooling fan will run at maximum speed when the estimated layer time " -"is shorter than the threshold value." +"La vitesse du ventilateur de refroidissement des pièces sera maximale " +"lorsque le temps de couche estimé est plus court que la valeur de réglage" msgid "Auxiliary part cooling fan" -msgstr "Auxiliary part cooling fan" +msgstr "Ventilateur de refroidissement auxiliaire" msgid "Exhaust fan" -msgstr "Exhaust fan" +msgstr "Ventilateur d’extraction" msgid "During print" -msgstr "During print" +msgstr "Pendant l’impression" msgid "Complete print" -msgstr "Complete print" +msgstr "Après l’impression" msgid "Filament start G-code" -msgstr "Filament start G-code" +msgstr "G-code de démarrage du filament" msgid "Filament end G-code" -msgstr "Filament end G-code" - -msgid "Multimaterial" -msgstr "" +msgstr "G-code de fin de filament" msgid "Wipe tower parameters" +msgstr "Paramètres de la tour d’essuyage" + +msgid "Multi Filament" msgstr "" -msgid "Toolchange parameters with single extruder MM printers" -msgstr "Toolchange parameters with single extruder MM printers" +msgid "Tool change parameters with single extruder MM printers" +msgstr "" +"Paramètres de changement d'outil avec les imprimantes MM à extrudeur unique" -msgid "Ramming settings" +msgid "Set" +msgstr "Appliquer" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "" +"Paramètres de changement d'outil pour les imprimantes MM à extrudeurs " +"multiples" + +msgid "Dependencies" +msgstr "Dépendances" + +msgid "Compatible printers" msgstr "" -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "" +msgid "Compatible process profiles" +msgstr "Profils de traitement compatibles" msgid "Printable space" -msgstr "Printable space" +msgstr "Espace imprimable" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" -msgstr "" +msgstr "Valeur non valide fournie pour le réglage %1% : %2%" msgid "G-code flavor is switched" -msgstr "" +msgstr "La version du G-code est modifiée" msgid "Cooling Fan" -msgstr "" +msgstr "Ventilateur de refroidissement" msgid "Fan speed-up time" -msgstr "" +msgstr "Durée d’accélération du ventilateur" msgid "Extruder Clearance" -msgstr "Extruder Clearance" +msgstr "Dégagement de l'extrudeur" msgid "Adaptive bed mesh" -msgstr "" +msgstr "Maillage du plateau adaptatif" msgid "Accessory" -msgstr "Accessory" +msgstr "Accessoire" -msgid "Machine gcode" -msgstr "Machine G-code" +msgid "Machine G-code" +msgstr "G-code de la machine" msgid "Machine start G-code" -msgstr "Machine start G-code" +msgstr "G-code de démarrage de la machine" msgid "Machine end G-code" -msgstr "Machine end G-code" +msgstr "G-code de fin de machine" msgid "Printing by object G-code" -msgstr "Printing by object G-code" +msgstr "G-code d’impression par objet" msgid "Before layer change G-code" -msgstr "Before layer change G-code" +msgstr "G-Code avant changement de couche" msgid "Layer change G-code" -msgstr "Layer change G-code" +msgstr "G-code de changement de couche" -msgid "Time lapse G-code" -msgstr "Time lapse G-code" +msgid "Timelapse G-code" +msgstr "G-code de Timelapse" -msgid "Change filament G-code" -msgstr "Change filament G-code" - -msgid "Change extrusion role G-code" +msgid "Clumping Detection G-code" msgstr "" +msgid "Change filament G-code" +msgstr "G-code de changement de filament" + +msgid "Change extrusion role G-code" +msgstr "G-code de changement du rôle de l’extrusion" + msgid "Pause G-code" -msgstr "Pause G-code" +msgstr "G-code de mise en pause" msgid "Template Custom G-code" -msgstr "Template Custom G-code" +msgstr "G-code personnalisé" msgid "Motion ability" -msgstr "Motion ability" +msgstr "Capacité de mouvement" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" -msgstr "Speed limitation" +msgstr "Limitation de vitesse" msgid "Acceleration limitation" -msgstr "Acceleration limitation" +msgstr "Limitation d'accélération" msgid "Jerk limitation" -msgstr "Jerk limitation" +msgstr "Limitation des secousses" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" +msgstr "Configuration multi-matériaux pour extrudeur unique" + +msgid "Number of extruders of the printer." +msgstr "Nombre d’extrudeurs de l’imprimante." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" msgstr "" +"Extrudeur unique multi-matériaux est sélectionné, \n" +"et tous les extrudeurs doivent avoir le même diamètre.\n" +"Souhaitez-vous modifier le diamètre de tous les extrudeurs pour qu’il " +"corresponde à la première valeur du diamètre de la buse de l’extrudeur ?" + +msgid "Nozzle diameter" +msgstr "Diamètre de la buse" msgid "Wipe tower" -msgstr "" +msgstr "Tour d’essuyage" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" +msgstr "Paramètres multi-matériaux pour extrudeur unique" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" msgstr "" +"Il s’agit d’une imprimante mono extrudeur multimatériaux, les diamètres de " +"tous les extrudeurs seront réglés sur la nouvelle valeur. Voulez-vous " +"continuer ?" msgid "Layer height limits" -msgstr "Layer height limits" +msgstr "Limites de hauteur de couche" -msgid "Lift Z Enforcement" -msgstr "" +msgid "Z-Hop" +msgstr "Saut en Z" msgid "Retraction when switching material" -msgstr "Retraction when switching material" +msgstr "Rétraction lors du changement de matériau" msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" +"L’option Essuyage n’est pas disponible lors de l’utilisation du mode " +"Rétraction Firmware.\n" "\n" -"Disable it in order to enable Firmware Retraction?" +"Voulez-vous désactiver cette option pour activer la Rétraction Firmware ?" msgid "Firmware Retraction" -msgstr "Firmware Retraction" +msgstr "Rétraction Firmware" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" -msgstr "Detached" +msgstr "Détaché" #, c-format, boost-format msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Filament Preset and %d Process Preset is attached to this printer. Those " -"presets would be deleted if the printer is deleted." +"Le préréglage de filament %d et le préréglage de processus %d sont associés " +"à cette imprimante. Ces préréglages seront supprimés si l’imprimante est " +"supprimée." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "" +"Les préréglages hérités d’autres préréglages ne peuvent pas être supprimés !" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "" -msgstr[1] "" +msgstr[0] "Les préréglages suivants héritent de ce préréglage." +msgstr[1] "Le préréglage suivant hérite de ce préréglage." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Preset" +msgstr "%1% Préréglage" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." -msgstr[0] "The following preset will be deleted too:" -msgstr[1] "The following presets will be deleted too:" - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." +msgstr[0] "Le préréglage suivant sera également supprimé." +msgstr[1] "Les préréglages suivants seront également supprimés." #, boost-format msgid "Are you sure to %1% the selected preset?" -msgstr "Are you sure you want to %1% the selected preset?" +msgstr "Êtes-vous sûr de %1% le préréglage sélectionné ?" -msgid "All" -msgstr "All" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Set" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." -msgstr "Click to reset current value and attach to the global value." +msgstr "" +"Cliquez pour réinitialiser la valeur actuelle et l'attacher à la valeur " +"globale." msgid "Click to drop current modify and reset to saved value." -msgstr "Click to drop current modifications and reset to saved value." +msgstr "" +"Cliquez pour supprimer la modification actuelle et réinitialiser la valeur " +"enregistrée." msgid "Process Settings" -msgstr "Process Settings" +msgstr "Paramètres de traitement" msgid "Undef" -msgstr "Undefined" +msgstr "Undef" msgid "Unsaved Changes" -msgstr "unsaved changes" +msgstr "Modifications non enregistrées" msgid "Transfer or discard changes" -msgstr "Transfer or discard changes" +msgstr "Ignorer ou conserver les modifications" msgid "Old Value" -msgstr "Old value" +msgstr "Ancienne valeur" msgid "New Value" -msgstr "New Value" +msgstr "Nouvelle Valeur" msgid "Transfer" -msgstr "Transfer" +msgstr "Transférer" msgid "Don't save" -msgstr "Don't save" +msgstr "Ne pas enregistrer" msgid "Discard" -msgstr "Discard" +msgstr "Ignorer" msgid "Click the right mouse button to display the full text." -msgstr "Click the right mouse button to display the full text." +msgstr "" +"Cliquez sur le bouton droit de la souris pour afficher le texte complet." msgid "All changes will not be saved" -msgstr "No changes will be saved." +msgstr "Toutes les modifications ne seront pas enregistrées" msgid "All changes will be discarded." -msgstr "All changes will be discarded." +msgstr "Toutes les modifications seront rejetées." msgid "Save the selected options." -msgstr "Save the selected options." +msgstr "Enregistrer les options sélectionnées." msgid "Keep the selected options." -msgstr "Keep the selected options." +msgstr "Conserver les options sélectionnées." msgid "Transfer the selected options to the newly selected preset." -msgstr "Transfer the selected options to the newly selected preset." +msgstr "" +"Transférez les options sélectionnées vers le préréglage nouvellement " +"sélectionné." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." -msgstr "" -"Save the selected options to preset \n" -"\"%1%\"." +msgstr "Enregistrez les options sélectionnées dans le préréglage \"%1%\"." #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"Transfer the selected options to the newly selected preset \n" -"\"%1%\"." +"Transférez les options sélectionnées vers le préréglage nouvellement " +"sélectionné \"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "Preset \"%1%\" contains the following unsaved changes:" +msgstr "" +"Le préréglage \"%1%\" contient les modifications non enregistrées suivantes :" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" is not compatible with the new printer profile and it " -"contains the following unsaved changes:" +"Le préréglage \"%1%\" n'est pas compatible avec le nouveau profil " +"d'imprimante et contient les modifications non enregistrées suivantes :" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" is not compatible with the new process profile and it " -"contains the following unsaved changes:" +"Le préréglage \"%1%\" n'est pas compatible avec le nouveau profil de " +"traitement et contient les modifications non enregistrées suivantes :" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Vous avez modifié certains paramètres du réglage prédéfini « %1% »." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" -"You can save or discard the preset values you have modified." +"Vous pouvez enregistrer ou rejeter les valeurs prédéfinies que vous avez " +"modifiées." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to " "transfer the values you have modified to the new preset." msgstr "" +"\n" +"Vous pouvez sauvegarder ou ignorer les valeurs de préréglage que vous avez " +"modifiées, ou choisir de transférer les valeurs que vous avez modifiées dans " +"le nouveau préréglage." msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "Vous avez déjà modifié vos réglages." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer " "the modified values to the new project" msgstr "" +"\n" +"Vous pouvez ignorer les valeurs prédéfinies que vous avez modifiées ou " +"choisir de transférer les valeurs modifiées dans le nouveau projet" msgid "Extruders count" -msgstr "Extruder count" - -msgid "General" -msgstr "General" +msgstr "Nombre d'extrudeurs" msgid "Capabilities" -msgstr "Capabilities" +msgstr "Fonctionnalités" msgid "Show all presets (including incompatible)" -msgstr "Show all presets (including incompatible)" +msgstr "Afficher tous les préréglages (y compris incompatibles)" msgid "Select presets to compare" -msgstr "Select presets to compare" +msgstr "Sélectionnez les préréglages à comparer" msgid "" "You can only transfer to current active profile because it has been modified." msgstr "" +"Le transfert vers le profil actif actuel n’est possible que s’il a été " +"modifié." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" +"Transférer les options sélectionnées du préréglage de gauche vers celui de " +"droite.\n" +"Remarque : Les nouveaux préréglages modifiés seront sélectionnés dans les " +"onglets de réglage après la fermeture de cette boîte de dialogue." msgid "Transfer values from left to right" -msgstr "" +msgstr "Transférer les valeurs de gauche à droite" msgid "" "If enabled, this dialog can be used for transfer selected values from left " "to right preset." msgstr "" +"Si elle est activée, cette boîte de dialogue peut être utilisée pour " +"convertir les valeurs sélectionnées de gauche à droite." msgid "Add File" -msgstr "Add File" +msgstr "Ajouter un Fichier" msgid "Set as cover" -msgstr "Set as cover" +msgstr "Définir comme couverture" msgid "Cover" -msgstr "Cover" +msgstr "Couverture" #, boost-format msgid "The name \"%1%\" already exists." -msgstr "The name \"%1%\" already exists." +msgstr "Le nom \"%1%\" existe déjà." msgid "Basic Info" -msgstr "Basic Info" +msgstr "Informations de base" msgid "Pictures" -msgstr "Pictures" +msgstr "Des photos" msgid "Bill of Materials" -msgstr "Bill of Materials" +msgstr "Nomenclature" msgid "Assembly Guide" -msgstr "Assembly Guide" +msgstr "Guide d'assemblage" msgid "Author" -msgstr "Author" +msgstr "Auteur" msgid "Model Name" -msgstr "Model Name" +msgstr "Nom du modèle" + +msgid "Description:" +msgstr "La description:" #, c-format, boost-format msgid "%s Update" -msgstr "%s Update" +msgstr "Mise à jour %s" msgid "A new version is available" -msgstr "A new version is available" +msgstr "Une nouvelle version est disponible" msgid "Configuration update" -msgstr "Configuration update" +msgstr "Mise à jour de la configuration" -msgid "A new configuration package available, Do you want to install it?" -msgstr "A new configuration package is available. Do you want to install it?" - -msgid "Description:" -msgstr "Description:" +msgid "A new configuration package is available. Do you want to install it?" +msgstr "" +"Un nouveau package de configuration disponible, Voulez-vous l'installer ?" msgid "Configuration incompatible" msgstr "Configuration incompatible" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "" -"the configuration package is incompatible with the current application." +"le package de configuration est incompatible avec l'application actuelle." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" -msgstr "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." +msgstr "" +"Le package de configuration est incompatible avec l'application actuelle. %s " +"mettra à jour le package de configuration, sinon il ne pourra pas démarrer" #, c-format, boost-format msgid "Exit %s" -msgstr "Exit %s" - -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"The configuration package is incompatible with the current version of Bambu " -"Studio." +msgstr "Sortir de %s" msgid "Configuration updates" -msgstr "Configuration updates" +msgstr "Mises à jour de la configuration" msgid "No updates available." -msgstr "No updates available." +msgstr "Aucune mise à jour disponible." msgid "The configuration is up to date." -msgstr "The configuration is up to date." +msgstr "La configuration est à jour." + +msgid "Open Wiki for more information >" +msgstr "" msgid "Obj file Import color" -msgstr "Obj file Import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "mtl file exist error,could not find the material:" +msgstr "" + +msgid "Please check obj or mtl file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "" -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "" msgid "Append" -msgstr "Append" +msgstr "" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "" -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Utiliser l’AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"L’imprimante sélectionnée (%s) est incompatible avec le profil d’imprimante " +"choisi dans le logiciel de découpe (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"La fonction Timelapse n'est pas prise en charge car la séquence d'impression " +"est réglée sur \"Par objet\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" -msgstr "" +msgstr "Personnalisation du pilonnage" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" @@ -8185,975 +10113,1107 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" +"Le pilonnage désigne l’extrusion rapide juste avant un changement d’outil " +"sur une imprimante MM à extrudeur unique. Son but est de façonner " +"correctement l’extrémité du filament déchargé afin qu’il n’empêche pas " +"l’insertion du nouveau filament et puisse lui-même être réinséré plus tard. " +"Cette phase est importante et différents matériaux peuvent nécessiter " +"différentes vitesses d’extrusion pour obtenir la bonne forme. Pour cette " +"raison, les taux d’extrusion lors du pilonnage sont réglables.\n" +"\n" +"Il s’agit d’un réglage de niveau expert, un réglage incorrect entraînera " +"probablement des bourrages, des roues de l’extrudeur broyant le filament, " +"etc." -msgid "Total ramming time" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Pour un débit constant, maintenez %1% tout en faisant glisser." + +msgid "Total ramming" msgstr "" -msgid "s" -msgstr "s" - -msgid "Total rammed volume" +msgid "Volume" msgstr "" -msgid "Ramming line width" +msgid "Ramming line" msgstr "" -msgid "Ramming line spacing" -msgstr "" - -msgid "Auto-Calc" -msgstr "Auto-Calc" - -msgid "Re-calculate" -msgstr "Re-calculate" - -msgid "Flushing volumes for filament change" -msgstr "Flushing volumes for filament change" - msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." -msgstr "Flushing volume (mm³) for each filament pair." +msgstr "Volume de purge (mm³) pour chaque paire de filaments." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "Suggestion: Flushing Volume in range [%d, %d]" +msgstr "Suggestion : Volume de purge dans la plage [%d, %d]." #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." -msgstr "The multiplier should be in range [%.2f, %.2f]." +msgstr "Le multiplicateur doit être compris dans la plage [%.2f, %.2f]." + +msgid "Re-calculate" +msgstr "Re-calculer" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" msgid "Multiplier" -msgstr "Multiplier" +msgstr "Multiplicateur" -msgid "unloaded" -msgstr "unloaded" +msgid "Flushing volumes for filament change" +msgstr "Volumes de purge pour le changement de filament" -msgid "loaded" -msgstr "loaded" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "From" - -msgid "To" -msgstr "To" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"Windows Media Player est nécessaire pour cette tâche ! Voulez-vous activer " +"‘Windows Media Player’ pour votre système d’exploitation ?" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" msgstr "" +"BambuSource n’a pas été correctement enregistré pour la lecture de médias ! " +"Appuyez sur Oui pour le réenregistrer. Vous recevrez deux fois la demande de " +"permission" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" +"Composant BambuSource manquant enregistré pour la lecture des médias ! " +"Veuillez réinstaller Snapmaker Orca ou demander de l’aide au service après-vente." msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" +"Si vous utilisez une BambuSource provenant d’une autre installation, la " +"lecture de la vidéo peut ne pas fonctionner correctement ! Appuyez sur Oui " +"pour résoudre le problème." msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"Il manque à votre système les codecs H.264 pour GStreamer, qui sont " +"nécessaires pour lire la vidéo. (Essayez d’installer les paquets " +"gstreamer1.0-plugins-bad ou gstreamer1.0-libav, puis redémarrez Snapmaker Orca)." msgid "Bambu Network plug-in not detected." -msgstr "Bambu Network plug-in not detected." +msgstr "Le plug-in Bambu Network n’a pas été détecté." msgid "Click here to download it." -msgstr "Click here to download it." +msgstr "Cliquez ici pour le télécharger." msgid "Login" -msgstr "Login" +msgstr "Connexion" msgid "The configuration package is changed in previous Config Guide" -msgstr "The configuration package is changed in previous Config Guide" +msgstr "" +"Le package de configuration est modifié dans le guide de configuration " +"précédent" msgid "Configuration package changed" -msgstr "Configuration package changed" +msgstr "Package de configuration modifié" msgid "Toolbar" -msgstr "Toolbar" +msgstr "Barre d'outils" msgid "Objects list" -msgstr "Objects list" +msgstr "Liste des objets" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files" - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "" +"Importez des données de géométrie à partir de fichiers STL/STEP/3MF/OBJ/AMF" msgid "Paste from clipboard" -msgstr "Paste from clipboard" +msgstr "Coller depuis le presse-papier" msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "Show/Hide 3Dconnexion devices settings dialog" +msgstr "" +"Afficher/Masquer la boîte de dialogue des paramètres des périphériques " +"3Dconnexion" msgid "Switch table page" -msgstr "Switch table page" +msgstr "Page du tableau de commutation" msgid "Show keyboard shortcuts list" -msgstr "Show keyboard shortcuts list" +msgstr "Afficher la liste des raccourcis clavier" msgid "Global shortcuts" -msgstr "Global shortcuts" - -msgid "Rotate View" -msgstr "Rotate View" +msgstr "Raccourcis globaux" msgid "Pan View" -msgstr "Pan View" +msgstr "Déplacement de vue" -msgid "Mouse wheel" -msgstr "Mouse wheel" +msgid "Rotate View" +msgstr "Rotation de la vue" msgid "Zoom View" -msgstr "Zoom View" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "Vue agrandie" +#, fuzzy msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"This auto orients selected objects or all objects. If there are selected " -"objects, it just orients the selected ones. Otherwise, it will orient all " -"objects in the current plate." +"Oriente automatiquement les objets sélectionnés ou tous les objets. S'il y a " +"des objets sélectionnés, il oriente uniquement ceux qui sont sélectionnés. " +"Sinon, il oriente tous les objets du projet en cours." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Oriente automatiquement tous les objets du plaque actuelle." msgid "Collapse/Expand the sidebar" -msgstr "Collapse/Expand the sidebar" +msgstr "Réduire/développer la barre latérale" -msgid "⌘+Any arrow" -msgstr "⌘+Any arrow" +msgid "Any arrow" +msgstr "Toutes les flèches" msgid "Movement in camera space" -msgstr "Movement in camera space" - -msgid "⌥+Left mouse button" -msgstr "⌥+Left mouse button" +msgstr "Mouvement dans l'espace de la caméra" msgid "Select a part" -msgstr "Select a part" - -msgid "⌘+Left mouse button" -msgstr "⌘+Left mouse button" +msgstr "Sélectionner une pièce" msgid "Select multiple objects" -msgstr "Select multiple objects" - -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Any arrow" - -msgid "Alt+Left mouse button" -msgstr "Alt+Left mouse button" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Left mouse button" - -msgid "Shift+Left mouse button" -msgstr "Shift+Left mouse button" +msgstr "Sélectionnez tous les objets sur la plaque actuelle" msgid "Select objects by rectangle" -msgstr "Select objects by rectangle" +msgstr "Sélectionner les objets par rectangle" msgid "Arrow Up" -msgstr "Arrow Up" +msgstr "Flèche Haut" msgid "Move selection 10 mm in positive Y direction" -msgstr "Move selection 10mm in positive Y direction" +msgstr "Déplacer la sélection de 10 mm dans la direction positive Y" msgid "Arrow Down" -msgstr "Arrow Down" +msgstr "Flèche Bas" msgid "Move selection 10 mm in negative Y direction" -msgstr "Move selection 10mm in negative Y direction" +msgstr "Déplacer la sélection de 10 mm dans la direction négative Y" msgid "Arrow Left" -msgstr "Arrow Left" +msgstr "Flèche Gauche" msgid "Move selection 10 mm in negative X direction" -msgstr "Move selection 10mm in negative X direction" +msgstr "Déplacer la sélection de 10 mm dans la direction négative X" msgid "Arrow Right" -msgstr "Arrow Right" +msgstr "Flèche Droite" msgid "Move selection 10 mm in positive X direction" -msgstr "Move selection 10mm in positive X direction" - -msgid "Shift+Any arrow" -msgstr "Shift+Any arrow" +msgstr "Déplacer la sélection de 10 mm dans la direction positive X" msgid "Movement step set to 1 mm" -msgstr "Movement step set to 1mm" +msgstr "Pas du mouvement réglé sur 1 mm" msgid "keyboard 1-9: set filament for object/part" -msgstr "Keyboard 1-9: set filament for object/part" +msgstr "clavier 1-9 : définir le filament pour l'objet/la pièce" msgid "Camera view - Default" -msgstr "Camera view - Default" +msgstr "Vue caméra - Par défaut" msgid "Camera view - Top" -msgstr "Camera view - Top" +msgstr "Vue caméra - Haut" msgid "Camera view - Bottom" -msgstr "Camera view - Bottom" +msgstr "Vue caméra - Bas" msgid "Camera view - Front" -msgstr "Camera view - Front" +msgstr "Vue de la caméra - Avant" msgid "Camera view - Behind" -msgstr "Camera view - Behind" +msgstr "Vue caméra - Derrière" msgid "Camera Angle - Left side" -msgstr "Camera Angle - Left side" +msgstr "Angle de caméra - Côté gauche" msgid "Camera Angle - Right side" -msgstr "Camera Angle - Right side" +msgstr "Angle de caméra - Côté droit" msgid "Select all objects" -msgstr "Select all objects" +msgstr "Sélectionner tous les objets" msgid "Gizmo move" -msgstr "Gizmo move" - -msgid "Gizmo scale" -msgstr "Gizmo scale" +msgstr "Gizmo déplacer" msgid "Gizmo rotate" -msgstr "Gizmo rotate" +msgstr "Gizmo pivoter" + +msgid "Gizmo scale" +msgstr "Gizmo redimensionner" + +msgid "Gizmo place face on bed" +msgstr "Gizmo placer la face sur le plateau" msgid "Gizmo cut" -msgstr "Gizmo cut" +msgstr "Gizmo couper" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Place face on bed" +msgid "Gizmo mesh boolean" +msgstr "Gizmo booléennes" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "Gizmo SLA support points" +msgstr "Gizmo Point de support SLA" msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM paint-on seam" +msgstr "Gizmo Peinture de la couture FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo embosser/graver du texte" + +msgid "Gizmo measure" +msgstr "Gizmo mesurer" + +msgid "Gizmo assemble" +msgstr "Gizmo assembler" + +msgid "Gizmo brim ears" +msgstr "Gizmo bordure à oreilles" msgid "Zoom in" -msgstr "" +msgstr "Zoom avant" msgid "Zoom out" -msgstr "" +msgstr "Zoom arrière" msgid "Switch between Prepare/Preview" -msgstr "" +msgstr "Basculer entre Préparer/Aperçu" msgid "Plater" -msgstr "Plater" +msgstr "Plateau" msgid "Move: press to snap by 1mm" -msgstr "Move: press to snap by 1mm" - -msgid "⌘+Mouse wheel" -msgstr "⌘+Mouse wheel" +msgstr "Déplacer : appuyez pour aligner de 1 mm" msgid "Support/Color Painting: adjust pen radius" -msgstr "Support/Color Painting: adjust pen radius" - -msgid "⌥+Mouse wheel" -msgstr "⌥+Mouse wheel" +msgstr "Support/Peinture couleur : ajustez le rayon du stylet" msgid "Support/Color Painting: adjust section position" -msgstr "Support/Color Painting: adjust section position" - -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Mouse wheel" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Mouse wheel" +msgstr "Support/Peinture couleur : ajuster la position de la section" msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" -msgstr "Set extruder number for the objects and parts" +msgstr "Définir le numéro d'extrudeur pour les objets et les pièces" -msgid "Delete objects, parts, modifiers " -msgstr "Delete objects, parts, modifiers" +msgid "Delete objects, parts, modifiers" +msgstr "Supprimer des objets, des pièces, des modificateurs" msgid "Select the object/part and press space to change the name" -msgstr "Select the object/part and press space to change the name" +msgstr "" +"Sélectionnez l'objet/la pièce et appuyez sur espace pour changer le nom" msgid "Mouse click" -msgstr "Mouse click" +msgstr "Clic de souris" msgid "Select the object/part and mouse click to change the name" -msgstr "Select the object/part and mouse click to change the name" +msgstr "" +"Sélectionnez l'objet/la pièce et cliquez avec la souris pour changer le nom" msgid "Objects List" -msgstr "Objects List" +msgstr "Liste d'objets" msgid "Vertical slider - Move active thumb Up" -msgstr "Vertical slider - Move active thumb Up" +msgstr "Barre de défilement verticale - Déplacer le curseur actif vers le Haut" msgid "Vertical slider - Move active thumb Down" -msgstr "Vertical slider - Move active thumb Down" +msgstr "Barre de défilement verticale - Déplacer le curseur actif vers le Bas" msgid "Horizontal slider - Move active thumb Left" -msgstr "Horizontal slider - Move active thumb Left" +msgstr "" +"Barre de défilement horizontale - Déplacer le curseur actif vers la Gauche" msgid "Horizontal slider - Move active thumb Right" -msgstr "Horizontal slider - Move active thumb Right" +msgstr "" +"Barre de défilement horizontale - Déplacer le curseur actif vers la Droite" msgid "On/Off one layer mode of the vertical slider" -msgstr "On/Off one layer mode of the vertical slider" +msgstr "On/Off mode couche unique de la barre de défilement verticale" -msgid "On/Off g-code window" -msgstr "" +msgid "On/Off G-code window" +msgstr "On/Off Fenêtre G-code" msgid "Move slider 5x faster" -msgstr "Move slider 5x faster" - -msgid "Shift+Mouse wheel" -msgstr "Shift+Mouse wheel" +msgstr "Déplacez le curseur 5 fois plus vite" msgid "Horizontal slider - Move to start position" -msgstr "" +msgstr "Curseur horizontal - Déplacement vers la position de départ" msgid "Horizontal slider - Move to last position" -msgstr "" +msgstr "Curseur horizontal - Déplacer vers la dernière position" msgid "Release Note" -msgstr "Release Note" +msgstr "Note de version" #, c-format, boost-format -msgid "version %s update information :" -msgstr "version %s update information:" +msgid "version %s update information:" +msgstr "informations de mise à jour de la version %s :" msgid "Network plug-in update" -msgstr "Network plug-in update" +msgstr "Mise à jour du plug-in réseau" msgid "" "Click OK to update the Network plug-in when Snapmaker Orca launches next time." msgstr "" -"Click OK to update the Network plug-in the next time Snapmaker Orca launches." +"Cliquez sur OK pour mettre à jour le plug-in réseau lors du prochain " +"démarrage de Snapmaker Orca." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "A new network plug-in (%s) is available. Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "" +"Un nouveau plug-in réseau (%s) est disponible. Voulez-vous l'installer ?" msgid "New version of Snapmaker Orca" -msgstr "New version of Snapmaker Orca" +msgstr "Nouvelle version de Snapmaker Orca" msgid "Skip this Version" -msgstr "Skip this Version" - -msgid "Done" -msgstr "Done" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Load" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" +msgstr "Sauter cette version" msgid "Confirm and Update Nozzle" -msgstr "Confirm and Update Nozzle" +msgstr "Confirmation et mise à jour de la buse" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN Connection Failed (Sending print file)" +msgid "Connect the printer using IP and access code" +msgstr "Connecter l’imprimante en utilisant l’IP et le code d’accès" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Step 1, please confirm that Snapmaker Orca and your printer are on the same LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." msgid "IP" msgstr "IP" msgid "Access Code" -msgstr "Access Code" +msgstr "Code d'Accès" + +msgid "Printer model" +msgstr "Modèle d’imprimante" + +msgid "Printer name" +msgstr "Nom de l’imprimante" msgid "Where to find your printer's IP and Access Code?" -msgstr "Where to find your printer's IP and Access Code?" +msgstr "Où trouver l'adresse IP et le code d'accès de votre imprimante ?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" +msgstr "Se connecter" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Configuration manuelle" msgid "IP and Access Code Verified! You may close the window" -msgstr "IP and Access Code Verified! You may close the window" +msgstr "IP et code d’accès vérifiés ! Vous pouvez fermer la fenêtre" + +msgid "connecting..." +msgstr "connexion…" + +msgid "Failed to connect to printer." +msgstr "Échec de la connexion à l’imprimante." + +msgid "Failed to publish login request." +msgstr "Échec de la publication de la demande de connexion." + +msgid "The printer has already been bound." +msgstr "L’imprimante a déjà été reliée." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" +"Le mode d’impression est incorrect, veuillez passer en mode LAN uniquement." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Connexion à l’imprimante… La boîte de dialogue se fermera plus tard" msgid "Connection failed, please double check IP and Access Code" -msgstr "Connection failed, please double check IP and Access Code" +msgstr "La connexion a échoué, veuillez vérifier l’IP et le code d’accès" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" -"Connection failed! If your IP and Access Code is correct, \n" -"please move to step 3 for troubleshooting network issues" +"Échec de la connexion ! Si votre IP et votre code d’accès sont corrects, \n" +"passez à l’étape 3 pour la résolution des problèmes de réseau" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" -msgstr "Model:" - -msgid "Serial:" -msgstr "Serial:" - -msgid "Version:" -msgstr "Version:" +msgstr "Modèle :" msgid "Update firmware" -msgstr "Update firmware" +msgstr "Mise à jour du firmware" msgid "Beta version" -msgstr "Beta version" - -msgid "Latest version" -msgstr "Latest version" +msgstr "Version Beta" msgid "Updating" -msgstr "Updating" +msgstr "Mise à jour" -msgid "Updating failed" -msgstr "Updating failed" +msgid "Update failed" +msgstr "La mise à jour a échoué" -msgid "Updating successful" -msgstr "Update successful" +msgid "Update successful" +msgstr "Mise à jour réussie" msgid "" "Are you sure you want to update? This will take about 10 minutes. Do not " "turn off the power while the printer is updating." msgstr "" -"Are you sure you want to update? This will take about 10 minutes. Do not " -"turn off the power while the printer is updating." +"Êtes-vous sûr de vouloir effectuer la mise à jour ? Cela prendra environ 10 " +"minutes. Ne mettez pas l'imprimante hors tension durant la mise à jour." msgid "" "An important update was detected and needs to be run before printing can " "continue. Do you want to update now? You can also update later from 'Upgrade " "firmware'." msgstr "" -"An important update was detected and needs to be run before printing can " -"continue. Do you want to update now? You can also update later from 'Update " -"firmware'." +"Une mise à jour importante a été détectée et doit être exécutée avant de " +"pouvoir poursuivre l'impression. Voulez-vous effectuer la mise à jour " +"maintenant ? Vous pouvez également effectuer une mise à jour ultérieurement " +"à partir de \"Mettre à jour le firmware\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " "printing. Do you want to update now? You can also update later on printer or " "update next time starting Orca." msgstr "" -"The firmware version is abnormal. Repairing and updating are required before " -"printing. Do you want to update now? You can also update later on the " -"printer or update next time you start Snapmaker Orca." +"La version du firmware est erronée. La réparation et la mise à jour sont " +"nécessaires avant l'impression. Voulez-vous effectuer la mise à jour " +"maintenant ? Vous pouvez également effectuer une mise à jour ultérieurement " +"depuis l'imprimante ou lors du prochain démarrage d'Snapmaker Orca." msgid "Extension Board" -msgstr "Extension Board" +msgstr "Carte d'Extension" msgid "Saving objects into the 3mf failed." -msgstr "Saving objects into the 3mf failed." +msgstr "L'enregistrement d'objets dans le 3mf a échoué." msgid "Only Windows 10 is supported." -msgstr "Only Windows 10 is supported." +msgstr "Seul Windows 10 est pris en charge." msgid "Failed to initialize the WinRT library." -msgstr "Failed to initialize the WinRT library." +msgstr "Échec de l'initialisation de la bibliothèque WinRT." msgid "Exporting objects" -msgstr "Exporting objects" +msgstr "Exportation d'objets" msgid "Failed loading objects." -msgstr "Failed loading objects." +msgstr "Échec du chargement des objets." msgid "Repairing object by Windows service" -msgstr "Repairing object by Windows service" +msgstr "Réparation d'un objet par le service Windows" msgid "Repair failed." -msgstr "Repair failed." +msgstr "La réparation a échoué." msgid "Loading repaired objects" -msgstr "Loading repaired objects" +msgstr "Chargement des objets réparés" msgid "Exporting 3mf file failed" -msgstr "Exporting 3mf file failed" +msgstr "Échec de l'exportation du fichier 3mf" msgid "Import 3mf file failed" -msgstr "Import 3mf file failed" +msgstr "Échec de l'importation du fichier 3mf" msgid "Repaired 3mf file does not contain any object" -msgstr "The repaired 3mf file does not contain any objects." +msgstr "Le fichier 3mf réparé ne contient aucun objet" msgid "Repaired 3mf file contains more than one object" -msgstr "The repaired 3mf file contains more than one object." +msgstr "Le fichier 3mf réparé contient plus d'un objet" msgid "Repaired 3mf file does not contain any volume" -msgstr "The repaired 3mf file does not contain any volume." +msgstr "Le fichier 3mf réparé ne contient aucun volume" msgid "Repaired 3mf file contains more than one volume" -msgstr "The repaired 3mf file contains more than one volume." +msgstr "Le fichier 3mf réparé contient plus d'un volume" msgid "Repair finished" -msgstr "Repair finished" +msgstr "Réparation terminée" msgid "Repair canceled" -msgstr "Repair canceled" +msgstr "Réparation annulée" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" -msgstr "Copying of file %1% to %2% failed: %3%" +msgstr "Échec de la copie du fichier %1% vers %2% : %3%" msgid "Need to check the unsaved changes before configuration updates." -msgstr "Please check any unsaved changes before updating the configuration." +msgstr "" +"Besoin de vérifier les modifications non enregistrées avant les mises à jour " +"de configuration." msgid "Configuration package: " -msgstr "" +msgstr "Paquet de configuration : " msgid " updated to " -msgstr "" +msgstr " mis à jour en " msgid "Open G-code file:" -msgstr "Open G-code file:" +msgstr "Ouvrir un fichier G-code :" msgid "" "One object has empty initial layer and can't be printed. Please Cut the " "bottom or enable supports." msgstr "" -"One object has empty initial layer and can't be printed. Please Cut the " -"bottom or enable supports." +"Un objet a une couche initiale vide et ne peut pas être imprimé. Veuillez " +"couper le bas ou activer les supports." #, boost-format msgid "Object can't be printed for empty layer between %1% and %2%." -msgstr "The object has empty layers between %1% and %2% and can’t be printed." +msgstr "" +"L'objet comporte des couches vides comprises entre %1% et %2% et ne peut pas " +"être imprimé." #, boost-format msgid "Object: %1%" -msgstr "Object: %1%" +msgstr "Objet : %1%" msgid "" "Maybe parts of the object at these height are too thin, or the object has " "faulty mesh" msgstr "" -"Parts of the object at these heights may be too thin or the object may have " -"a faulty mesh." +"Peut-être que certaines parties de l'objet à ces hauteurs sont trop fines ou " +"que l'objet a un maillage défectueux" msgid "No object can be printed. Maybe too small" -msgstr "No object can be printed. It may be too small." +msgstr "Aucun objet ne peut être imprimé. Peut-être trop petit" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" -"\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." msgstr "" +"Votre impression est très proche des régions d’amorçage. Assurez-vous qu’il " +"n’y a pas de collision." + +msgid "" "Failed to generate G-code for invalid custom G-code.\n" "\n" +msgstr "" +"Échec de la génération du G-code pour un G-code personnalisé non valide.\n" msgid "Please check the custom G-code or use the default custom G-code." -msgstr "Please check the custom G-code or use the default custom G-code." +msgstr "" +"Veuillez vérifier le G-code personnalisé ou utiliser le G-code personnalisé " +"par défaut." #, boost-format msgid "Generating G-code: layer %1%" -msgstr "Generating G-code: layer %1%" +msgstr "Génération du G-code : couche %1%" -msgid "Inner wall" -msgstr "Inner wall" - -msgid "Outer wall" -msgstr "Outer wall" - -msgid "Overhang wall" -msgstr "Overhang wall" - -msgid "Sparse infill" -msgstr "Sparse infill" - -msgid "Internal solid infill" -msgstr "Internal solid infill" - -msgid "Top surface" -msgstr "Top surface" - -msgid "Bottom surface" -msgstr "Bottom surface" - -msgid "Internal Bridge" +msgid "Flush volumes matrix do not match to the correct size!" msgstr "" +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + +msgid "Inner wall" +msgstr "Paroi intérieure" + +msgid "Outer wall" +msgstr "Paroi extérieure" + +msgid "Overhang wall" +msgstr "Paroi en surplomb" + +msgid "Sparse infill" +msgstr "Remplissage" + +msgid "Internal solid infill" +msgstr "Remplissage plein interne" + +msgid "Top surface" +msgstr "Surface supérieure" + +msgid "Bottom surface" +msgstr "Surface inférieure" + +msgid "Internal Bridge" +msgstr "Pont interne" + msgid "Gap infill" -msgstr "Gap infill" +msgstr "Remplissage d'espace" msgid "Support interface" -msgstr "Support interface" +msgstr "Interface de support" msgid "Support transition" -msgstr "Support transition" +msgstr "Soutenir la transition" msgid "Multiple" -msgstr "Multiple" +msgstr "Plusieurs" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " -msgstr "Failed to calculate line width of %1%. Cannot get value of “%2%” " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " +msgstr "" +"Échec du calcul de la largeur de ligne de %1%. Impossible d'obtenir la " +"valeur de \"%2%\" " msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " "and extrusion width" msgstr "" +"Espacement non valide fourni à Flow::with_spacing(), vérifiez la hauteur de " +"votre couche et la largeur d’extrusion" msgid "undefined error" -msgstr "undefined error" +msgstr "erreur non définie" msgid "too many files" -msgstr "too many files" +msgstr "trop de fichiers" msgid "file too large" -msgstr "File too large" +msgstr "fichier trop volumineux" msgid "unsupported method" -msgstr "unsupported method" +msgstr "méthode non supportée" msgid "unsupported encryption" -msgstr "unsupported encryption" +msgstr "cryptage non supporté" msgid "unsupported feature" -msgstr "unsupported feature" +msgstr "fonction non supportée" msgid "failed finding central directory" -msgstr "failed finding central directory" +msgstr "impossible de trouver le répertoire central" msgid "not a ZIP archive" -msgstr "not a ZIP archive" +msgstr "n'est pas une archive ZIP" msgid "invalid header or corrupted" -msgstr "invalid header or corrupted" +msgstr "en-tête invalide ou corrompu" msgid "unsupported multidisk" -msgstr "Saving to RAID is not supported." +msgstr "multidisque non pris en charge" msgid "decompression failed" -msgstr "decompression failed" +msgstr "la décompression a échoué" msgid "compression failed" -msgstr "compression failed" +msgstr "échec de la compression" msgid "unexpected decompressed size" -msgstr "unexpected decompressed size" +msgstr "volume de décompression inattendu" msgid "CRC check failed" -msgstr "CRC check failed" +msgstr "La vérification CRC a échoué" msgid "unsupported central directory size" -msgstr "unsupported central directory size" +msgstr "volume du répertoire central non supporté" msgid "allocation failed" -msgstr "allocation failed" +msgstr "échec de l'allocation" msgid "file open failed" -msgstr "file open failed" +msgstr "échec de l'ouverture du fichier" msgid "file create failed" -msgstr "file create failed" +msgstr "échec de création du fichier" msgid "file write failed" -msgstr "file write failed" +msgstr "échec d'écriture du fichier" msgid "file read failed" -msgstr "file read failed" +msgstr "échec de lecture du fichier" msgid "file close failed" -msgstr "file close failed" +msgstr "échec de la fermeture du fichier" msgid "file seek failed" -msgstr "file seek failed" +msgstr "impossible de trouver le fichier" msgid "file stat failed" -msgstr "file stat failed" +msgstr "impossible d'établir des statistiques pour ce fichier" msgid "invalid parameter" -msgstr "invalid parameter" +msgstr "paramètre non valide" msgid "invalid filename" -msgstr "invalid filename" +msgstr "nom de fichier non valide" msgid "buffer too small" -msgstr "Buffer too small" +msgstr "buffer trop petit" msgid "internal error" -msgstr "internal error" +msgstr "erreur interne" msgid "file not found" -msgstr "file not found" +msgstr "fichier non trouvé" msgid "archive too large" -msgstr "Archive too large" +msgstr "archive trop volumineuse" msgid "validation failed" -msgstr "validation failed" +msgstr "échec de la validation" msgid "write callback failed" -msgstr "write callback failed" +msgstr "échec du rappel d'écriture" #, boost-format msgid "" "%1% is too close to exclusion area, there may be collisions when printing." msgstr "" -"%1% is too close to exclusion area. There may be collisions when printing." +"%1% est trop proche de la zone d'exclusion. Il peut y avoir des collisions " +"lors de l'impression." #, boost-format msgid "%1% is too close to others, and collisions may be caused." -msgstr "%1% is too close to others, and collisions may be caused." +msgstr "" +"%1% est trop proche des autres, cela pourrait provoquer des collisions." #, boost-format msgid "%1% is too tall, and collisions will be caused." -msgstr "%1% is too tall, and collisions will be caused." - -msgid " is too close to others, there may be collisions when printing." -msgstr " is too close to others; there may be collisions when printing." +msgstr "%1% est trop grand, cela pourrait provoquer des collisions." msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" -" is too close to exclusion area, there may be collisions when printing." +" est trop proche d'une zone d'exclusion, il peut y avoir des collisions lors " +"de l'impression." + +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" msgid "Prime Tower" -msgstr "Prime Tower" +msgstr "Tour d’amorçage" msgid " is too close to others, and collisions may be caused.\n" -msgstr " is too close to others, and collisions may be caused.\n" +msgstr "" +" est trop proche des autres. Des collisions risquent d'être provoquées.\n" msgid " is too close to exclusion area, and collisions will be caused.\n" -msgstr " is too close to an exclusion area, and collisions will be caused.\n" +msgstr "" +" est trop proche d'une zone d'exclusion. Cela va entraîner des collisions.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Unable to print multiple filaments which have large temperature differences " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing." msgid "No extrusions under current settings." -msgstr "No extrusions under current settings." +msgstr "Aucune extrusion dans les paramètres actuels." msgid "" "Smooth mode of timelapse is not supported when \"by object\" sequence is " "enabled." msgstr "" -"Smooth mode of timelapse is not supported when \"by object\" sequence is " -"enabled." +"Le mode fluide du timelapse n'est pas pris en charge lorsque le mode " +"d'impression « par objet » est activé." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Please select \"By object\" print sequence to print multiple objects in " -"spiral vase mode." +"Veuillez sélectionner la séquence d'impression \"Par objet\" pour imprimer " +"plusieurs objets en mode vase en spirale." msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." msgstr "" -"Spiral (vase) mode does not work when an object contains more than one " -"material." +"Le mode vase en spirale ne fonctionne pas lorsqu'un objet contient plusieurs " +"matériaux." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Bien que l’objet %1% corresponde au volume de construction, il dépasse la " +"hauteur maximale du volume de construction en raison de la compensation du " +"rétrécissement du matériau." #, boost-format msgid "The object %1% exceeds the maximum build volume height." -msgstr "" +msgstr "L’objet %1% dépasse la hauteur maximale du volume d’impression." #, boost-format msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." msgstr "" +"Bien que l’objet %1% s’adapte lui-même au volume d’impression, sa dernière " +"couche dépasse la hauteur maximale du volume de construction." msgid "" "You might want to reduce the size of your model or change current print " "settings and retry." msgstr "" +"Vous devez réduire la taille de votre modèle ou modifier les paramètres " +"d’impression actuels et réessayer." msgid "Variable layer height is not supported with Organic supports." -msgstr "Variable layer height is not supported with Organic supports." +msgstr "" +"La hauteur de couche variable n’est pas prise en charge avec les supports " +"organiques." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Différents diamètres de buses et de filaments peuvent ne pas fonctionner " +"correctement lorsque la tour d’amorçage est activée. Il s’agit d’un projet " +"très expérimental, il convient donc de procéder avec prudence." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." +"La tour d’essuyage n’est actuellement supportée qu’avec l’adressage relatif " +"des extrudeurs (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Ooze prevention is currently not supported with the prime tower enabled." +"La prévention du suintement n’est possible qu’avec la tour d’essuyage " +"lorsque l’option ‘single_extruder_multi_material’ est désactivée." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " -"RepRapFirmware and Repetier G-code flavors." +"La tour d’amorçage n’est actuellement prise en charge que pour les versions " +"Marlin, RepRap/Sprinter, RepRapFirmware et Repetier G-code." msgid "The prime tower is not supported in \"By object\" print." -msgstr "A prime tower is not supported in “By object” print." +msgstr "" +"La tour d’amorçage n'est pas prise en charge dans l'impression \"Par objet\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"A prime tower is not supported when adaptive layer height is on. It requires " -"that all objects have the same layer height." +"La tour d’amorçage n'est pas prise en charge lorsque la hauteur de couche " +"adaptative est activée. Cela nécessite que tous les objets aient la même " +"hauteur de couche." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"A prime tower requires any “support gap” to be a multiple of layer height." +"La tour d’amorçage nécessite que \"l'écart de support\" soit un multiple de " +"la hauteur de la couche" -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "A prime tower requires that all objects have the same layer height." +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "" +"La tour d’amorçage nécessite que tous les objets aient la même hauteur de " +"couche" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" -"A prime tower requires that all objects are printed over the same number of " -"raft layers." +"La tour d’amorçage nécessite que tous les objets soient imprimés sur le même " +"nombre de couche de radeau" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"La tour d’amorçage n’est prise en charge pour plusieurs objets que s’ils " +"sont imprimés avec la même valeur de support_top_z_distance." msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"A prime tower requires that all objects are sliced with the same layer " -"height." +"La tour d’amorçage nécessite que tous les objets soient découpés avec la " +"même hauteur de couche." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" -"The prime tower is only supported if all objects have the same variable " -"layer height" +"La tour d’amorçage n'est prise en charge que si tous les objets ont la même " +"hauteur de couche variable" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Un ou plusieurs objets se sont vus attribuer un extrudeur que l’imprimante " +"ne possède pas." msgid "Too small line width" -msgstr "Line width too small" +msgstr "Largeur de ligne trop petite" msgid "Too large line width" -msgstr "Line width too large" +msgstr "Largeur de ligne trop grande" + +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Impression avec plusieurs extrudeuses ayant des diamètres de buse " +"différents. Si le support doit être imprimé avec le filament actuel " +"(support_filament == 0 ou support_interface_filament == 0), toutes les buses " +"doivent avoir le même diamètre." msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"A prime tower requires that support has the same layer height as the object." +"La tour d’amorçage nécessite que le support ait la même hauteur de couche " +"avec l'objet." msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." msgstr "" +"Le diamètre de la pointe des supports organiques ne doit pas être inférieur " +"à la largeur d’extrusion du matériau utilisé pour les supports." msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" +"Le diamètre des branches des supports organiques ne doit pas être inférieur " +"à 2 fois la largeur d’extrusion du matériau utilisé pour les supports." msgid "" "Organic support branch diameter must not be smaller than support tree tip " "diameter." msgstr "" +"Le diamètre des branches des supports organiques ne doit pas être inférieur " +"au diamètre de la pointe des supports." msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -"Support enforcers are used but support is not enabled. Please enable support." +"Les forceurs de support sont utilisés mais le support n'est pas activé. " +"Veuillez activer les supports." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "Layer height cannot exceed nozzle diameter." +msgid "Layer height cannot exceed nozzle diameter." +msgstr "La hauteur de la couche ne peut pas dépasser le diamètre de la buse" msgid "" "Relative extruder addressing requires resetting the extruder position at " "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" +"L'extrusion relative de l'extrudeur nécessite de réinitialiser la position " +"de celui-ci à chaque couche pour éviter la perte de précision de la virgule " +"flottante. Ajouter \"G92 E0\" au G-code de changement de couche." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" +"\"G92 E0\" a été trouvé dans le G-code avant le changement de couche, ce qui " +"est incompatible avec l’extrusion absolue de l’extrudeur." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" +"\"G92 E0\" a été trouvé dans le G-code de changement de couche, ce qui est " +"incompatible avec l’extrusion absolue de l’extrudeur." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "Plate %d: %s does not support filament %s" +msgstr "Plaque %d : %s ne prend pas en charge le filament %s" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" +"Un réglage trop bas de la vitesse de saccade peut entraîner des artefacts " +"sur les surfaces courbes" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" @@ -9163,6 +11223,21 @@ msgid "" "You can adjust the maximum jerk setting in your printer's configuration to " "get higher speeds." msgstr "" +"Le réglage du jerk dépasse le jerk maximum de l’imprimante " +"(machine_max_jerk_x/machine_max_jerk_y).\n" +"Orca plafonne automatiquement la vitesse de l’impulsion pour s’assurer " +"qu’elle ne dépasse pas les capacités de l’imprimante.\n" +"Vous pouvez ajuster le réglage du jerk maximum dans la configuration de " +"votre imprimante pour obtenir des vitesses plus élevées." + +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" msgid "" "The acceleration setting exceeds the printer's maximum acceleration " @@ -9172,6 +11247,12 @@ msgid "" "You can adjust the machine_max_acceleration_extruding value in your " "printer's configuration to get higher speeds." msgstr "" +"Le paramètre d’accélération dépasse l’accélération maximale de l’imprimante " +"(machine_max_acceleration_extruding).\n" +"Orca limitera automatiquement la vitesse d’accélération pour s’assurer " +"qu’elle ne dépasse pas les capacités de l’imprimante.\n" +"Vous pouvez ajuster la valeur machine_max_acceleration_extruding dans la " +"configuration de votre imprimante pour obtenir des vitesses plus élevées." msgid "" "The travel acceleration setting exceeds the printer's maximum travel " @@ -9181,52 +11262,77 @@ msgid "" "You can adjust the machine_max_acceleration_travel value in your printer's " "configuration to get higher speeds." msgstr "" +"Le réglage de l’accélération de déplacement dépasse l’accélération de " +"déplacement maximale de l’imprimante (machine_max_acceleration_travel).\n" +"Orca plafonnera automatiquement la vitesse d’accélération du déplacement " +"pour s’assurer qu’elle ne dépasse pas les capacités de l’imprimante.\n" +"Vous pouvez ajuster la valeur machine_max_acceleration_travel dans la " +"configuration de votre imprimante pour obtenir des vitesses plus élevées." + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Le rétrécissement du filament ne sera pas utilisé car le rétrécissement du " +"filament pour les filaments utilisés diffère de manière significative." msgid "Generating skirt & brim" -msgstr "Generating skirt & brim" +msgstr "Génération jupe et bord" msgid "Exporting G-code" -msgstr "Exporting G-code" +msgstr "Exportation du G-code" msgid "Generating G-code" -msgstr "Generating G-code" +msgstr "Génération du G-code" msgid "Failed processing of the filename_format template." -msgstr "Processing of the filename_format template failed." +msgstr "Échec du traitement du modèle filename_format." + +msgid "Printer technology" +msgstr "Technologie de l'imprimante" msgid "Printable area" -msgstr "Printable area" +msgstr "Zone imprimable" + +msgid "Extruder printable area" +msgstr "" msgid "Bed exclude area" -msgstr "Excluded bed area" +msgstr "Zone d'exclusion de plateau" msgid "" "Unprintable area in XY plane. For example, X1 Series printers use the front " "left corner to cut filament during filament change. The area is expressed as " "polygon by points in following format: \"XxY, XxY, ...\"" msgstr "" -"Unprintable area in XY plane. For example, X1 Series printers use the front " -"left corner to cut filament during filament change. The area is expressed as " -"polygon by points in following format: \"XxY, XxY, ...\"" +"Zone non imprimable dans le plan XY. Par exemple, les imprimantes de la " +"série X1 utilisent le coin avant gauche pour couper le filament lors du " +"changement de filament. La zone est exprimée sous forme de polygone par des " +"points au format suivant : \"XxY, XxY,... \"" msgid "Bed custom texture" -msgstr "Bed custom texture" +msgstr "Texture personnalisée du plateau" msgid "Bed custom model" -msgstr "Bed custom model" +msgstr "Modèle de plateau personnalisé" msgid "Elephant foot compensation" -msgstr "Elephant foot compensation" +msgstr "Compensation de l'effet patte d'éléphant" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"This shrinks the first layer on the build plate to compensate for elephant " -"foot effect." +"Rétrécissez la couche initiale sur le plateau pour compenser l'effet de " +"patte d'éléphant" msgid "Elephant foot compensation layers" -msgstr "" +msgstr "Couches de compensation de la patte d'éléphant" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9234,42 +11340,55 @@ msgid "" "the next layers will be linearly shrunk less, up to the layer indicated by " "this value." msgstr "" +"Nombre de couches sur lesquelles la compensation de la patte d'éléphant sera " +"active. La première couche sera réduite de la valeur de compensation de la " +"patte d'éléphant, puis les couches suivantes seront réduites linéairement " +"moins, jusqu'à la couche indiquée par cette valeur." msgid "layers" -msgstr "layers" +msgstr "couches" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" -"This is the height for each layer. Smaller layer heights give greater " -"accuracy but longer printing time." +"Hauteur de découpe pour chaque couche. Une hauteur de couche plus petite " +"signifie plus de précision et plus de temps d'impression" msgid "Printable height" -msgstr "Printable height" +msgstr "Hauteur imprimable" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "Hauteur imprimable maximale limitée par le mécanisme de l'imprimante" + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." msgstr "" -"This is the maximum printable height which is limited by the height of the " -"build area." msgid "Preferred orientation" -msgstr "" +msgstr "Orientation préférée" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient stls on the Z axis upon initial import." msgstr "" +"Orienter automatiquement les stls sur l’axe Z lors de l’importation initiale" msgid "Printer preset names" -msgstr "Printer preset names" +msgstr "Noms des préréglages de l'imprimante" msgid "Use 3rd-party print host" -msgstr "" +msgstr "Utiliser un hôte d’impression tiers" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" +"Permettre le contrôle de l’imprimante de BambuLab par des hôtes d’impression " +"tiers" msgid "Hostname, IP or URL" -msgstr "Hostname, IP or URL" +msgstr "Nom d'hôte, adresse IP ou URL" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " @@ -9278,371 +11397,661 @@ msgid "" "user name and password into the URL in the following format: https://" "username:password@your-octopi-address/" msgstr "" -"Snapmaker Orca can upload G-code files to a printer host. This field should " -"contain the hostname, IP address or URL of the printer host instance. Print " -"host behind HAProxy with basic auth enabled can be accessed by putting the " -"user name and password into the URL in the following format: https://" +"Snapmaker Orca peut téléverser des fichiers G-code sur une imprimante hôte. Ce " +"champ doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte " +"de l'imprimante. L'hôte d'impression derrière HAProxy avec " +"l'authentification de base activée est accessible en saisissant le nom " +"d'utilisateur et le mot de passe dans l'URL au format suivant : https://" "username:password@your-octopi-address/" msgid "Device UI" -msgstr "Device UI" +msgstr "Interface utilisateur de l’appareil" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" -"Specify the URL of your device user interface if it's not same as print_host" +"Spécifiez l’URL de l’interface utilisateur de votre appareil si elle n’est " +"pas identique à print_host" msgid "API Key / Password" -msgstr "API Key / Password" +msgstr "Clé API / Mot de passe" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orca can upload G-code files to a printer host. This field should " -"contain the API Key or the password required for authentication." +"Snapmaker Orca peut téléverser des fichiers G-code sur une imprimante hôte. Ce " +"champ doit contenir la clé API ou le mot de passe requis pour " +"l'authentification." -msgid "Name of the printer" -msgstr "Name of the printer" +msgid "Name of the printer." +msgstr "Nom de l'imprimante" msgid "HTTPS CA File" -msgstr "HTTPS CA File" +msgstr "Fichier HTTPS CA" msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" -"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " -"in crt/pem format. If left blank, the default OS CA certificate repository " -"is used." +"Un fichier de certificat CA personnalisé peut être spécifié pour les " +"connexions HTTPS OctoPrint, au format crt/pem. Si ce champ est laissé vide, " +"le référentiel de certificats OS CA par défaut est utilisé." msgid "User" -msgstr "User" +msgstr "Utilisateur" msgid "Password" -msgstr "Password" +msgstr "Mot de passe" msgid "Ignore HTTPS certificate revocation checks" -msgstr "Ignore HTTPS certificate revocation checks" +msgstr "Ignorer les contrôles de révocation des certificats HTTPS" msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" -"Ignore HTTPS certificate revocation checks in the case of missing or offline " -"distribution points. One may want to enable this option for self signed " -"certificates if connection fails." +"Ignorez les contrôles de révocation des certificats HTTPS en cas de points " +"de distribution manquants ou hors ligne. Il peut être utile d'activer cette " +"option pour les certificats auto-signés en cas d'échec de la connexion." -msgid "Names of presets related to the physical printer" -msgstr "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." +msgstr "Noms des préréglages associés à l'imprimante physique" msgid "Authorization Type" -msgstr "Authorization Type" +msgstr "Type d'Autorisation" msgid "API key" -msgstr "API key" +msgstr "Clé API" msgid "HTTP digest" -msgstr "HTTP digest" +msgstr "Résumé HTTP" -msgid "Avoid crossing wall" -msgstr "Avoid crossing walls" +msgid "Avoid crossing walls" +msgstr "Évitez de traverser les parois" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -"This detours to avoid traveling across walls, which may cause blobs on the " -"surface" +"Faire un détour et éviter de traverser la paroi, ce qui pourrait causer des " +"dépôts sur la surface" -msgid "Avoid crossing wall - Max detour length" -msgstr "Avoid crossing walls - Max detour length" +msgid "Avoid crossing walls - Max detour length" +msgstr "Évitez de traverser les parois - Longueur maximale du détour" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Maximum detour distance for avoiding crossing wall: The printer won't detour " -"if the detour distance is larger than this value. Detour length could be " -"specified either as an absolute value or as percentage (for example 50%) of " -"a direct travel path. A value of 0 will disable this." +"Distance de détour maximale pour éviter de traverser une paroi: l'imprimante " +"ne fera pas de détour si la distance de détour est supérieure à cette " +"valeur. La longueur du détour peut être spécifiée sous forme de valeur " +"absolue ou de pourcentage (par exemple 50 %) d'un trajet direct. Une valeur " +"de 0 désactivera cette option" msgid "mm or %" -msgstr "mm or %" +msgstr "mm ou %" msgid "Other layers" -msgstr "Other layers" +msgstr "Autres couches" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" -"This is the bed temperature for layers except for the first one. A value of " -"0 means the filament does not support printing on the Cool Plate." - -msgid "°C" -msgstr "°C" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -"This is the bed temperature for layers except for the first one. A value of " -"0 means the filament does not support printing on the Engineering Plate." +"Il s'agit de la température du plateau pour toutes les couches à l'exception " +"de la première. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur la plaque \"Cool plate\"." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" -"This is the bed temperature for layers except for the first one. A value of " -"0 means the filament does not support printing on the High Temp Plate." +"Température du plateau pour les couches à l’exception de la couche initiale. " +"La valeur 0 signifie que le filament ne peut pas être imprimé sur la plaque " +"Cool Plate texturée." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" -"Bed temperature after the first layer. 0 means the filament is not supported " -"on the Textured PEI Plate." +"Il s'agit de la température du plateau pour toutes les couches à l'exception " +"de la première. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur la plaque Engineering." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Il s'agit de la température du plateau pour toutes les couches à l'exception " +"de la première. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur le plateau haute température (\"High Temp plate\")." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Température du plateau après la première couche. 0 signifie que le filament " +"n'est pas supporté par la plaque PEI texturée." msgid "Initial layer" -msgstr "First layer" +msgstr "Couche initiale" msgid "Initial layer bed temperature" -msgstr "First layer bed temperature" +msgstr "Température du plateau lors de la couche initiale" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"This is the bed temperature of the first layer. A value of 0 means the " -"filament does not support printing on the Cool Plate." +"Température du plateau de la couche initiale. La valeur 0 signifie que le " +"filament n’est pas compatible avec l’impression sur la Cool Plate SuperTack" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" +"Il s'agit de la température du plateau pour la première couche. Une valeur à " +"0 signifie que ce filament ne peut pas être imprimé sur la plaque \"Cool " +"plate\"" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"This is the bed temperature of the first layer. A value of 0 means the " -"filament does not support printing on the Engineering Plate." +"Température du plateau de la couche initiale. La valeur 0 signifie que le " +"filament ne peut pas être imprimé sur la plaque Cool Plate texturée" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" -"This is the bed temperature of the first layer. A value of 0 means the " -"filament does not support printing on the High Temp Plate." +"Il s'agit de la température du plateau pour la première couche. Une valeur à " +"0 signifie que ce filament ne peut pas être imprimé sur la plaque Engineering" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -"Bed temperature of the first layer 0 means the filament is not supported on " -"the Textured PEI Plate." +"Il s'agit de la température du plateau pour la première couche. Une valeur à " +"0 signifie que ce filament ne peut pas être imprimé sur le plateau haute " +"température (\"High Temp plate\")" -msgid "Bed types supported by the printer" -msgstr "Bed types supported by the printer" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"La température du plateau à la première couche. La valeur 0 signifie que le " +"filament n'est pas supporté sur la plaque PEI texturée" + +msgid "Bed types supported by the printer." +msgstr "Types de plateaux pris en charge par l'imprimante" msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Engineering Plate" +msgstr "Plaque Cool plate lisse" msgid "Smooth High Temp Plate" +msgstr "Plaque lisse haute température" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" -msgstr "First layer print sequence" +msgstr "Séquence d’impression de la première couche" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "Séquence d’impression des autres couches" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "Le nombre d’autres couches de la séquence d’impression" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "Séquence de filament des autres couches" -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "This G-code is inserted at every layer change before lifting z." +msgid "This G-code is inserted at every layer change before the Z lift." +msgstr "" +"Ce G-code est inséré à chaque changement de couche avant le levage du Z" msgid "Bottom shell layers" -msgstr "Bottom shell layers" +msgstr "Couches inférieures de la coque" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" -"This is the number of solid layers of bottom shell, including the bottom " -"surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"Il s'agit du nombre de couches pleines de coque inférieure, y compris la " +"couche de surface inférieure. Lorsque l'épaisseur calculée par cette valeur " +"est plus fine que l'épaisseur de la coque inférieure, les couches de la " +"coque inférieure seront augmentées" msgid "Bottom shell thickness" -msgstr "Bottom shell thickness" +msgstr "Épaisseur de la coque inférieure" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" -"The number of bottom solid layers is increased when slicing if the thickness " -"calculated by bottom shell layers is thinner than this value. This can avoid " -"having too thin a shell when layer height is small. 0 means that this " -"setting is disabled and the thickness of the bottom shell is determined " -"simply by the number of bottom shell layers." +"Le nombre de couches pleines inférieures est augmenté lors du découpage si " +"l'épaisseur calculée par les couches de coque inférieures est inférieure à " +"cette valeur. Cela peut éviter d'avoir une coque trop fine lorsque la " +"hauteur de couche est faible. 0 signifie que ce paramètre est désactivé et " +"que l'épaisseur de la coque inférieure est absolument déterminée par les " +"couches de la coque inférieure" msgid "Apply gap fill" -msgstr "" +msgstr "Remplissage des trous" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" +"Active le remplissage des espaces pour les surfaces solides sélectionnées. " +"La longueur minimale de l'espace qui sera comblé peut être contrôlée à " +"partir de l'option « Filtrer les petits espaces » ci-dessous.\n" +"\n" +"Options :\n" +"1. Partout : Applique le remplissage de l'espace aux faces supérieures, " +"inférieures et internes des solides pour une résistance maximale.\n" +"2. Surfaces supérieure et inférieure : Remplissage des espaces uniquement " +"sur les faces supérieure et inférieure, ce qui permet d'équilibrer la " +"vitesse d'impression, de réduire les risques de sur-extrusion dans le " +"remplissage solide et de s'assurer que les faces supérieure et inférieure ne " +"présentent pas de trous d'épingle.\n" +"3. Nulle part : Désactive le remplissage de l'espace pour toutes les zones " +"de remplissage solide.\n" +"\n" +"Notez que si vous utilisez le générateur de périmètre classique, le " +"remplissage de l’espace peut également être généré entre les périmètres, si " +"une ligne de largeur complète ne peut pas tenir entre eux. Ce remplissage du " +"périmètre n’est pas contrôlé par ce paramètre.\n" +"\n" +"Si vous souhaitez que tous les espaces, y compris ceux générés par le " +"périmètre classique, soient supprimés, définissez la valeur de filtrage des " +"petits espaces sur un grand nombre, comme 999999.\n" +"\n" +"Il n’est toutefois pas conseillé de procéder ainsi, car le remplissage des " +"espaces entre les périmètres contribue à la solidité du modèle. Pour les " +"modèles où un remplissage excessif est généré entre les périmètres, une " +"meilleure option serait de passer au générateur de parois Arachne et " +"d’utiliser cette option pour contrôler si le remplissage cosmétique des " +"surfaces supérieures et inférieures est généré" msgid "Everywhere" -msgstr "" +msgstr "Partout" msgid "Top and bottom surfaces" -msgstr "" +msgstr "Surfaces supérieure et inférieure" msgid "Nowhere" -msgstr "" +msgstr "Nulle part" -msgid "Force cooling for overhang and bridge" -msgstr "Force cooling for overhangs and bridges" +msgid "Force cooling for overhangs and bridges" +msgstr "Refroidissement forcé pour les surplombs et les ponts" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Enable this option to optimize the part cooling fan speed for overhangs and " -"bridges to get better cooling" +"Activez cette option pour permettre le réglage de la vitesse du ventilateur " +"de refroidissement de la pièce pour les surplombs, les ponts internes et " +"externes. Le réglage de la vitesse du ventilateur en fonction de ces " +"caractéristiques peut améliorer la qualité globale de l’impression et " +"réduire le gauchissement." -msgid "Fan speed for overhang" -msgstr "Fan speed for overhangs" +msgid "Overhangs and external bridges fan speed" +msgstr "Vitesse du ventilateur pour les ponts extérieurs et les surplombs" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Force part cooling fan to be this speed when printing bridges or overhang " -"walls which have a large overhang degree. Forcing cooling for overhangs and " -"bridges can achieve better quality for these parts." +"Utilisez cette vitesse du ventilateur de refroidissement de la pièce lorsque " +"vous imprimez des ponts ou des parois en surplomb dont le seuil de surplomb " +"dépasse la valeur définie dans le paramètre ‘Seuil de refroidissement des " +"surplombs’ ci-dessus. L’augmentation du refroidissement spécifiquement pour " +"les surplombs et les ponts peut améliorer la qualité d’impression globale de " +"ces éléments.\n" +"\n" +"Veuillez noter que cette vitesse de ventilateur est limitée à l’extrémité " +"inférieure par le seuil minimum de vitesse de ventilateur défini ci-dessus. " +"Elle est également ajustée à la hausse jusqu’au seuil de vitesse maximale du " +"ventilateur lorsque le seuil de temps de couche minimal n’est pas atteint." -msgid "Cooling overhang threshold" -msgstr "Cooling overhang threshold" +msgid "Overhang cooling activation threshold" +msgstr "Seuil d’activation du refroidissement en surplomb" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Force cooling fan to be a specific speed when overhang degree of printed " -"part exceeds this value. This is expressed as a percentage which indicates " -"how much width of the line without support from lower layer. 0% means " -"forcing cooling for all outer wall no matter the overhang degree." +"Lorsque le dépassement dépasse le seuil spécifié, le ventilateur de " +"refroidissement est forcé de fonctionner à la « Vitesse du ventilateur pour " +"les surplombs » définie ci-dessous. Ce seuil est exprimé en pourcentage, " +"indiquant la portion de la largeur de chaque ligne qui n’est pas supportée " +"par la couche située en dessous. En réglant cette valeur sur 0%, on force le " +"ventilateur de refroidissement à fonctionner pour toutes les parois en " +"surplomb, quel que soit le degré de surplomb." -msgid "Bridge infill direction" -msgstr "" +msgid "External bridge infill direction" +msgstr "Direction du remplissage du pont extérieur" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -"Bridging angle override. 0 means the bridging angle will be calculated " -"automatically. Otherwise the provided angle will be used for external " -"bridges. Use 180° for zero angle." +"Forçage de l’angle des ponts. S’il est laissé à zéro, l’angle des ponts sera " +"calculé automatiquement. Sinon, l’angle fourni sera utilisé pour les ponts " +"externes. Utilisez 180° pour un angle nul." -msgid "Bridge density" -msgstr "" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" - -msgid "Bridge flow ratio" -msgstr "Bridge flow ratio" +msgid "Internal bridge infill direction" +msgstr "Direction du remplissage du pont interne" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" +"Priorité à l’angle de pont interne. S’il est laissé à zéro, l’angle de " +"pontage sera calculé automatiquement. Dans le cas contraire, l’angle fourni " +"sera utilisé pour les ponts internes. Utiliser 180° pour l’angle zéro.\n" +"\n" +"Il est recommandé de le laisser à 0, à moins qu’un modèle spécifique impose " +"de ne pas le faire." + +msgid "External bridge density" +msgstr "Densité du pont externe" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Contrôle la densité (l’espacement) des lignes de pont externes. 100 % " +"signifie que le pont est plein. La valeur par défaut est 100%.\n" +"\n" +"Des ponts externes moins denses peuvent contribuer à améliorer la fiabilité, " +"car l’air a plus de place pour circuler autour du pont extrudé, ce qui " +"améliore sa vitesse de refroidissement." + +msgid "Internal bridge density" +msgstr "Densité du pont interne" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Contrôle la densité (l’espacement) des lignes de pont internes. 100 % " +"signifie que le pont est plein. La valeur par défaut est 100%.\n" +"\n" +" Des ponts internes moins denses peuvent contribuer à réduire le gonflement " +"de la surface supérieure et à améliorer la fiabilité des ponts internes, car " +"l’air a plus de place pour circuler autour du pont extrudé, ce qui améliore " +"sa vitesse de refroidissement.\n" +"\n" +"Cette option fonctionne particulièrement bien lorsqu’elle est combinée avec " +"la deuxième option de pont interne sur le remplissage, ce qui permet " +"d’améliorer encore la structure du pont interne avant l’extrusion du " +"remplissage solide." + +msgid "Bridge flow ratio" +msgstr "Débit des ponts" + +msgid "" "Decrease this value slightly (for example 0.9) to reduce the amount of " -"material extruded for bridges to avoid sagging." +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Diminuez légèrement cette valeur (par exemple 0,9) pour réduire la quantité " +"de matériau pour le pont, afin d’améliorer l’affaissement.\n" +"\n" +"Le débit réel du pont utilisé est calculé en multipliant cette valeur par le " +"rapport de débit du filament et, s’il est défini, par le rapport de débit de " +"l’objet." msgid "Internal bridge flow ratio" -msgstr "" +msgstr "Ratio de débit du pont interne" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" +"Cette valeur détermine l’épaisseur de la couche de pont interne. Il s’agit " +"de la première couche au-dessus d’un remplissage peu dense. Diminuez " +"légèrement cette valeur (par exemple 0,9) pour améliorer la qualité de la " +"surface sur un remplissage peu dense.\n" +"\n" +"Le débit du pont interne utilisé est calculé en multipliant cette valeur par " +"le rapport de débit du pont, le rapport de débit du filament et, s’il est " +"défini, le rapport de débit de l’objet." msgid "Top surface flow ratio" -msgstr "Top surface flow ratio" +msgstr "Ratio du débit des surfaces supérieures" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"Ce facteur affecte la quantité de matériau pour le remplissage du massif " +"supérieur. Vous pouvez le réduire légèrement pour obtenir une finition de " +"surface lisse.\n" +"\n" +"Le débit réel de la surface supérieure utilisé est calculé en multipliant " +"cette valeur par le rapport de débit du filament et, s’il est défini, par le " +"rapport de débit de l’objet." msgid "Bottom surface flow ratio" +msgstr "Ratio du débit des surfaces inférieures" + +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Ce facteur affecte la quantité de matériau pour le remplissage solide du " +"fond.\n" +"\n" +"Le débit réel du remplissage solide inférieur utilisé est calculé en " +"multipliant cette valeur par le rapport de débit du filament et, s’il est " +"défini, par le rapport de débit de l’objet." + +msgid "Set other flow ratios" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" -msgstr "" +msgstr "Parois précises" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" -msgstr "Only one wall on top surfaces" +msgstr "Une seule paroi sur les surfaces supérieures" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" -msgstr "" "Use only one wall on flat top surfaces, to give more space to the top infill " -"pattern" +"pattern." +msgstr "" +"N'utilisez qu'une seule paroi sur les surfaces supérieures planes, afin de " +"donner plus d'espace au motif de remplissage supérieur" msgid "One wall threshold" -msgstr "" +msgstr "Seuil de paroi unique" #, no-c-format, no-boost-format msgid "" @@ -9655,43 +12064,62 @@ msgid "" "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" +"Si une surface supérieure doit être imprimée et qu’elle est partiellement " +"couverte par une autre couche, elle ne sera pas considérée comme une couche " +"supérieure si sa largeur est inférieure à cette valeur. Cela peut être utile " +"pour ne pas déclencher l’option « un périmètre sur le dessus » sur des " +"surfaces qui ne devraient être couvertes que par des périmètres. Cette " +"valeur peut être un mm ou un % de la largeur d’extrusion du périmètre.\n" +"Attention : Si cette option est activée, des artefacts peuvent être créés si " +"vous avez des éléments fins sur la couche suivante, comme des lettres. " +"Réglez ce paramètre à 0 pour supprimer ces artefacts." msgid "Only one wall on first layer" -msgstr "Only one wall on first layer" +msgstr "Une seule paroi sur la première couche" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" +"Utiliser qu’une seule paroi sur la première couche, pour donner plus " +"d’espace au motif de remplissage inférieur" msgid "Extra perimeters on overhangs" -msgstr "" +msgstr "Parois supplémentaires sur les surplombs" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" +"Créer des chemins de périmètres supplémentaires sur les surplombs abrupts et " +"les zones où les ponts ne peuvent pas être ancrés." -msgid "Reverse on odd" -msgstr "" +msgid "Reverse on even" +msgstr "Inverser lors du passage pair" msgid "Overhang reversal" -msgstr "" +msgstr "Inversion du surplomb" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" +"Extruder les périmètres qui ont une partie au-dessus d’un surplomb dans le " +"sens inverse sur des couches paires. Ce motif alternatif peut améliorer " +"considérablement les surplombs prononcés.\n" +"\n" +"Ce paramètre peut également contribuer à réduire la déformation de la pièce " +"en raison de la réduction des contraintes dans les parois de la pièce." msgid "Reverse only internal perimeters" -msgstr "" +msgstr "Inverser uniquement les périmètres internes" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9700,342 +12128,533 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" +"Appliquer la logique d’inversion des périmètres uniquement sur les " +"périmètres internes.\n" +"\n" +"Ce paramètre réduit considérablement les contraintes exercées sur les " +"pièces, car elles sont désormais réparties dans des directions alternées. " +"Cela devrait réduire la déformation des pièces tout en maintenant la qualité " +"des parois externes. Cette fonction peut être très utile pour les matériaux " +"sujets à la déformation, comme l’ABS/ASA, ainsi que pour les filaments " +"élastiques, comme le TPU et le Silk PLA. Elle peut également contribuer à " +"réduire la déformation des régions flottantes sur les supports.\n" +"\n" +"Pour que ce paramètre soit le plus efficace possible, il est recommandé de " +"régler le seuil d’inversion sur 0 afin que toutes les parois internes " +"s’impriment dans des directions alternées sur des couches régulières, quel " +"que soit leur degré de surplomb." msgid "Bridge counterbore holes" -msgstr "" +msgstr "Trous d'alésage pour le pont" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" +"Cette option crée des ponts pour les trous d'alésage, ce qui permet de les " +"imprimer sans support. Les modes disponibles sont les suivants\n" +"1. Aucun : Aucun pont n’est créé.\n" +"2. Partiellement connecté : Seule une partie de la zone non prise en charge " +"sera connectée.\n" +"3. Couche sacrificielle : Une couche de pont sacrificielle complète est " +"créée." msgid "Partially bridged" -msgstr "" +msgstr "Partiellement connecté" msgid "Sacrificial layer" -msgstr "" +msgstr "Couche sacrificielle" msgid "Reverse threshold" -msgstr "" +msgstr "Seuil d’inversion" msgid "Overhang reversal threshold" -msgstr "" +msgstr "Seuil d’inversion des surplombs" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" +"Nombre de mm de dépassement nécessaire pour que l’inversion soit considérée " +"comme utile. Il peut s’agir d’un pourcentage de la largeur du périmètre.\n" +"La valeur 0 active l’inversion toutes les couches paires.\n" +"Lorsque la paroi en surplomb n’est pas activée, cette option est ignorée et " +"l’inversion se fait sur toutes les couches paires." msgid "Slow down for overhang" -msgstr "Slow down for overhangs" +msgstr "Ralentir pour le surplomb" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" -"Enable this option to slow down when printing overhangs. The speeds for " -"different overhang percentages are set below." +"Activez cette option pour ralentir l'impression pour différents degrés de " +"surplomb" msgid "Slow down for curled perimeters" -msgstr "" +msgstr "Ralentir lors des périmètres courbés" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" +"Par exemple, un ralentissement supplémentaire sera appliqué lors de " +"l’impression de surplombs sur des angles aigus comme l’avant de la coque du " +"Benchy, réduisant ainsi l’enroulement qui s’aggrave sur plusieurs couches.\n" +"\n" +"Il est généralement recommandé d’activer cette option à moins que le " +"refroidissement de votre imprimante soit suffisamment puissant ou que la " +"vitesse d’impression soit suffisamment lente pour que le recourbement du " +"périmètre ne se produise pas. Si vous imprimez avec une vitesse de périmètre " +"externe élevée, ce paramètre peut introduire de légers artefacts lors du " +"ralentissement en raison de la grande variance des vitesses d’impression. Si " +"vous remarquez des artefacts, assurez-vous que votre avance de pression est " +"réglée correctement.\n" +"\n" +"Remarque : lorsque cette option est activée, les périmètres en surplomb sont " +"traités comme des surplombs, ce qui signifie que la vitesse de surplomb est " +"appliquée même si le périmètre en surplomb fait partie d’un pont. Par " +"exemple, lorsque les périmètres sont en surplomb de 100 %, sans paroi les " +"soutenant par en dessous, la vitesse de surplomb de 100 % sera appliquée." msgid "mm/s or %" -msgstr "mm/s or %" +msgstr "mm/s ou %" -msgid "External" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" - -msgid "Speed of bridge and completely overhang wall" -msgstr "This is the speed for bridges and 100% overhang walls." - -msgid "mm/s" -msgstr "mm/s" +"Vitesse des extrusions de pont visible de l’extérieur.\n" +"\n" +"En outre, si la fonction Ralentir pour les périmètres courbés est désactivée " +"ou si le mode Surplomb classique est activé, il s’agira de la vitesse " +"d’impression des parois en surplomb dont l’appui est inférieur à 13 %, " +"qu’elles fassent partie d’un pont ou d’un surplomb." msgid "Internal" -msgstr "" +msgstr "Interne" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" +"Vitesse des ponts internes. Si la valeur est exprimée en pourcentage, elle " +"sera calculée sur la base de la vitesse du pont. La valeur par défaut est " +"150%." msgid "Brim width" -msgstr "Brim width" +msgstr "Largeur de la bordure" -msgid "Distance from model to the outermost brim line" -msgstr "This is the distance from the model to the outermost brim line." +msgid "Distance from model to the outermost brim line." +msgstr "Distance du modèle à la ligne de bord la plus externe" msgid "Brim type" -msgstr "Brim type" +msgstr "Type de bordure" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." -msgstr "" -"This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgstr "" +"Cela permet de contrôler la génération de bordure extérieur et/ou intérieur " +"des modèles. Auto signifie que la largeur de bordure est analysée et " +"calculée automatiquement." msgid "Brim-object gap" -msgstr "Brim-object gap" +msgstr "Écart bord-objet" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"This creates a gap between the innermost brim line and the object and can " -"make the brim easier to remove." +"Un espace entre la ligne de bord la plus interne et l'objet peut faciliter " +"le retrait du bord" msgid "Brim ears" -msgstr "" +msgstr "Bordures à oreilles" msgid "Only draw brim over the sharp edges of the model." -msgstr "" +msgstr "Ne tracer la bordure que sur les arêtes vives du modèle." msgid "Brim ear max angle" -msgstr "" +msgstr "Angle maximum de la bordure à oreilles" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" +"Angle maximum pour laisser apparaître la bordure à oreilles.\n" +"S’il est défini sur 0, aucune bordure ne sera créée.\n" +"S’il est réglé sur ~180, la bordure sera créée sur tout sauf les sections " +"droites." msgid "Brim ear detection radius" +msgstr "Rayon de détection de la bordure à oreilles" + +msgid "" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." +msgstr "" +"La géométrie sera décimée avant de détecter les angles vifs. Ce paramètre " +"indique la longueur minimale de l’écart pour la décimation.\n" +"0 pour désactiver" + +msgid "Select printers" +msgstr "" + +msgid "upward compatible machine" +msgstr "machine à compatibilité ascendante" + +msgid "Condition" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Expression booléenne utilisant les valeurs de configuration d’un profil " +"d’imprimante actif. Si cette expression vaut true, ce profil est considéré " +"comme compatible avec le profil d’imprimante actif." + +msgid "Select profiles" msgstr "" -msgid "Compatible machine" -msgstr "Compatible machine" - -msgid "upward compatible machine" -msgstr "upward compatible machine" - -msgid "Compatible machine condition" -msgstr "Compatible machine condition" - -msgid "Compatible process profiles" -msgstr "Compatible process profiles" - -msgid "Compatible process profiles condition" -msgstr "Compatible process profiles condition" - -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." msgstr "" -"This determines the print sequence, allowing you to print layer-by-layer or " -"object-by-object." +"Expression booléenne utilisant les valeurs de configuration d’un profil " +"d’impression actif. Si cette expression vaut true, ce profil est considéré " +"comme compatible avec le profil d’impression actif." + +msgid "Print sequence, layer by layer or object by object." +msgstr "Séquence d'impression, couche par couche ou objet par objet" msgid "By layer" -msgstr "By layer" +msgstr "Par couche" msgid "By object" -msgstr "By object" +msgstr "Par objet" msgid "Intra-layer order" -msgstr "" +msgstr "Ordre intra-couche" -msgid "Print order within a single layer" -msgstr "" +msgid "Print order within a single layer." +msgstr "Ordre d’impression au sein d’une même couche" msgid "As object list" -msgstr "" +msgstr "En tant que liste d’objets" msgid "Slow printing down for better layer cooling" -msgstr "Slow printing down for better layer cooling" +msgstr "Impression lente pour un meilleur refroidissement des couches" msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" -"Enable this option to slow printing speed down to ensure that the final " -"layer time is not shorter than the layer time threshold in \"Max fan speed " -"threshold\", so that the layer can be cooled for a longer time. This can " -"improve the quality for small details." +"Activez cette option pour ralentir la vitesse d'impression afin que le temps " +"de couche final ne soit pas plus court que le seuil de temps de couche dans " +"\"Seuil de vitesse maximale du ventilateur\", afin que cette couche puisse " +"être refroidie plus longtemps. Cela peut améliorer la qualité de " +"refroidissement pour l'aiguille et les petits détails" msgid "Normal printing" -msgstr "Normal printing" +msgstr "Impression normale" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" -"This is the default acceleration for both normal printing and travel after " -"the first layer." - -msgid "mm/s²" -msgstr "mm/s²" +"L'accélération par défaut de l'impression normale et du déplacement à " +"l'exception de la couche initiale" msgid "Default filament profile" -msgstr "Default filament profile" +msgstr "Profil de filament par défaut" -msgid "Default filament profile when switch to this machine profile" -msgstr "Default filament profile when switching to this machine profile" +msgid "Default filament profile when switching to this machine profile." +msgstr "Profil de filament par défaut lors du passage à ce profil de machine" msgid "Default process profile" -msgstr "Default process profile" +msgstr "Profil de traitement par défaut" -msgid "Default process profile when switch to this machine profile" -msgstr "Default process profile when switching to this machine profile" +msgid "Default process profile when switching to this machine profile." +msgstr "Profil de traitement par défaut lors du passage à ce profil de machine" msgid "Activate air filtration" -msgstr "Activate air filtration" +msgstr "Activer la filtration de l’air" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" +"Activer pour une meilleure filtration de l’air. Commande G-code : M106 P3 " +"S(0-255)" msgid "Fan speed" -msgstr "Fan speed" +msgstr "Vitesse du ventilateur" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -"Speed of exhaust fan during printing.This speed will override the speed in " -"filament custom g-code" +"Vitesse du ventilateur d’extraction pendant l’impression. Cette vitesse " +"écrasera la vitesse dans le G-code personnalisé du filament." -msgid "Speed of exhaust fan after printing completes" -msgstr "" +msgid "Speed of exhaust fan after printing completes." +msgstr "Vitesse du ventilateur d’extraction après l’impression" msgid "No cooling for the first" -msgstr "No cooling for the first" +msgstr "Pas de refroidissement pour" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" -msgstr "" "Turn off all cooling fans for the first few layers. This can be used to " -"improve bed adhesion." +"improve build plate adhesion." +msgstr "" +"Éteignez tous les ventilateurs de refroidissement pour les premières " +"couches. Cela peut être utilisé pour améliorer l'adhérence à la plaque" msgid "Don't support bridges" -msgstr "Don't support bridges" +msgstr "Ne pas supporter les ponts" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" -"This disables supporting bridges, which decreases the amount of support " -"required. Bridges can usually be printed directly without support over a " -"reasonable distance." +"Cela désactive le support des ponts, ce qui diminue le nombre de supports " +"requis. Les ponts peuvent généralement être imprimés directement sans " +"support s'ils ne sont pas très longs" -msgid "Thick bridges" -msgstr "Thick bridges" +msgid "Thick external bridges" +msgstr "Ponts extérieurs épais" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" -"If enabled, bridges are more reliable and can bridge longer distances but " -"may look worse. If disabled, bridges look better but are reliable only for " -"shorter distances." +"S'ils sont activés, les ponts sont plus fiables et peuvent couvrir de plus " +"longues distances, mais ils peuvent sembler moins jolis. S'ils sont " +"désactivés, les ponts ont une meilleure apparence mais ne sont fiables que " +"sur de courtes distances." msgid "Thick internal bridges" -msgstr "" +msgstr "Ponts internes épais" msgid "" "If enabled, thick internal bridges will be used. It's usually recommended to " "have this feature turned on. However, consider turning it off if you are " "using large nozzles." msgstr "" +"Si cette option est activée, des ponts internes épais seront utilisés. Il " +"est généralement recommandé d’activer cette fonctionnalité. Pensez cependant " +"à la désactiver si vous utilisez des buses larges." -msgid "Don't filter out small internal bridges (beta)" -msgstr "" +msgid "Extra bridge layers (beta)" +msgstr "Couches de pont supplémentaires (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" +"Cette option permet de générer une couche de bridge supplémentaire sur les " +"bridges internes et/ou externes.\n" +"\n" +"Les couches de pont supplémentaires permettent d'améliorer l'apparence et la " +"fiabilité du pont, car le remplissage solide est mieux supporté. Ceci est " +"particulièrement utile pour les imprimantes rapides, où les vitesses du pont " +"et du remplissage varient considérablement. La couche de pont supplémentaire " +"permet de réduire la formation de bourrelets sur les surfaces supérieures, " +"ainsi que la séparation de la couche de pont externe de ses périmètres " +"environnants.\n" +"\n" +"Il est généralement recommandé de régler ce paramètre au moins sur « Pont " +"externe uniquement », à moins que des problèmes spécifiques ne soient " +"constatés avec le modèle découpé.\n" +"\n" +"Options possibles :\n" +"1. Désactivé - ne génère pas de deuxième couche de pont. Il s'agit de la " +"valeur par défaut, définie à des fins de compatibilité.\n" +"2. Pont externe uniquement - génère des couches de deuxième pont pour les " +"ponts faisant face à l’extérieur uniquement. Veuillez noter que les petits " +"ponts qui sont plus courts ou plus étroits que le nombre de périmètres " +"défini seront ignorés car ils ne bénéficieront pas d’une deuxième couche de " +"pont. Si elle est générée, la deuxième couche de bridge sera extrudée " +"parallèlement à la première couche de bridge afin de renforcer la solidité " +"du bridge.\n" +"3. Pont interne uniquement - génère des couches de deuxième pont pour les " +"ponts internes sur un remplissage peu dense uniquement. Veuillez noter que " +"les ponts internes sont comptabilisés dans le nombre de couches de la coque " +"supérieure de votre modèle. La deuxième couche de pont interne sera extrudée " +"aussi près que possible de la perpendiculaire à la première. Si plusieurs " +"régions d’un même îlot présentent des angles de pont différents, la dernière " +"région de cet îlot sera sélectionnée comme référence d’angle.\n" +"4. Appliquer à tous - génère les deuxièmes couches de bridge pour les " +"bridges internes et externes.\n" + +msgid "Disabled" +msgstr "Désactivé" + +msgid "External bridge only" +msgstr "Pont externe uniquement" + +msgid "Internal bridge only" +msgstr "Pont interne uniquement" + +msgid "Apply to all" +msgstr "Appliquer à tous" + +msgid "Filter out small internal bridges" +msgstr "Filtrer les petits ponts internes" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" "By default, small internal bridges are filtered out and the internal solid " "infill is printed directly over the sparse infill. This works well in most " "cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." -msgstr "" - -msgid "Disabled" +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" +"Cette option peut aider à réduire le gonflement des surfaces supérieures " +"dans les modèles fortement inclinés ou courbés.\n" +"Par défaut, les petits ponts internes sont filtrés et le remplissage solide " +"interne est imprimé directement sur le remplissage peu dense. Cela " +"fonctionne bien dans la plupart des cas, accélérant l'impression sans trop " +"compromettre la qualité de la surface supérieure.\n" +"Cependant, dans les modèles fortement inclinés ou courbés, en particulier " +"lorsqu'une densité de remplissage trop faible est utilisée, il peut en " +"résulter un enroulement du remplissage solide non soutenu, ce qui provoque " +"un effet de pilonnage.\n" +"L’activation d’un filtrage limité ou l’absence de filtrage entraîne " +"l’impression d’une couche de pont interne sur un remplissage solide interne " +"légèrement non soutenu. Les options ci-dessous contrôlent la sensibilité du " +"filtrage, c’est-à-dire qu’elles contrôlent l’endroit où les ponts internes " +"sont créés.\n" +"1. Filtre - active cette option. C’est le comportement par défaut et il " +"fonctionne bien dans la plupart des cas.\n" +"2. Filtrage limité - crée des ponts internes sur les surfaces fortement " +"inclinées tout en évitant les ponts inutiles. Cette option fonctionne bien " +"pour la plupart des modèles difficiles.\n" +"3. Pas de filtrage - crée des ponts internes sur chaque surplomb interne " +"potentiel. Cette option est utile pour les modèles à surface supérieure " +"fortement inclinée ; cependant, dans la plupart des cas, elle crée trop de " +"ponts inutiles." msgid "Limited filtering" -msgstr "" +msgstr "Filtrage limité" msgid "No filtering" -msgstr "" +msgstr "Pas de filtrage" msgid "Max bridge length" -msgstr "Max bridge length" +msgstr "Longueur max des ponts" msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"This is the maximum length of bridges that don't need support. Set it to 0 " -"if you want all bridges to be supported, and set it to a very large value if " -"you don't want any bridges to be supported." +"Il s'agit de la longueur maximale des ponts qui n'ont pas besoin de support. " +"Mettez 0 si vous souhaitez que tous les ponts soient pris en charge, ou " +"mettez une valeur très élevée si vous souhaitez qu'aucun pont ne soit pris " +"en charge." msgid "End G-code" -msgstr "End G-code" +msgstr "G-code de fin" -msgid "End G-code when finish the whole printing" -msgstr "Add end G-Code when finishing the entire print." +msgid "End G-code when finishing the entire print." +msgstr "G-code de fin lorsque vous avez terminé toute l'impression" -msgid "Between Object Gcode" -msgstr "Between Object Gcode" +msgid "Between Object G-code" +msgstr "G-code entre objet" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insérer le G-code entre les objets. Ce paramètre n’entrera en vigueur que " +"lorsque vous imprimerez vos modèles objet par objet." -msgid "End G-code when finish the printing of this filament" -msgstr "Add end G-code when finishing the printing of this filament." +msgid "End G-code when finishing the printing of this filament." +msgstr "G-code de fin lorsque l'impression de ce filament est terminée" msgid "Ensure vertical shell thickness" -msgstr "Ensure vertical shell thickness" +msgstr "Assurer l’épaisseur de la coque verticale" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " @@ -10047,73 +12666,92 @@ msgid "" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" +"Ajouter un remplissage plein près des surfaces inclinées pour garantir " +"l’épaisseur verticale de la coque (couches solides supérieures et " +"inférieures).\n" +"Aucune : Aucun remplissage plein ne sera ajouté nulle part. Attention : " +"Utilisez cette option avec précaution si votre modèle comporte des surfaces " +"inclinées.\n" +"Critique seulement : Évitez d’ajouter des remplissages solides pour les " +"parois.\n" +"Modéré : Ajouter un remplissage plein uniquement pour les surfaces fortement " +"inclinées\n" +"Tous : ajouter un remplissage plein pour toutes les surfaces inclinées " +"appropriées.\n" +"La valeur par défaut est Tous." msgid "Critical Only" -msgstr "" +msgstr "Critique seulement" msgid "Moderate" -msgstr "" +msgstr "Modéré" msgid "Top surface pattern" -msgstr "Top surface pattern" +msgstr "Motif de surface supérieure" -msgid "Line pattern of top surface infill" -msgstr "This is the line pattern for top surface infill." - -msgid "Concentric" -msgstr "Concentric" - -msgid "Rectilinear" -msgstr "Rectilinear" +msgid "Line pattern of top surface infill." +msgstr "Motif de ligne du remplissage de la surface supérieure" msgid "Monotonic" -msgstr "Monotonic" +msgstr "Monotone" msgid "Monotonic line" -msgstr "Monotonic line" +msgstr "Ligne monotone" + +msgid "Rectilinear" +msgstr "Rectiligne" msgid "Aligned Rectilinear" -msgstr "Aligned Rectilinear" +msgstr "Rectiligne Aligné" + +msgid "Concentric" +msgstr "Concentrique" msgid "Hilbert Curve" -msgstr "Hilbert Curve" +msgstr "Courbe de Hilbert" msgid "Archimedean Chords" -msgstr "Archimedean Chords" +msgstr "Spirale d'Archimède" msgid "Octagram Spiral" -msgstr "Octagram Spiral" +msgstr "Spirale Octagramme" msgid "Bottom surface pattern" -msgstr "Bottom surface pattern" +msgstr "Motif de surface inférieure" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" -"This is the line pattern of bottom surface infill, not including bridge " -"infill." +"Motif de ligne du remplissage de la surface inférieure, pas du remplissage " +"du pont" msgid "Internal solid infill pattern" -msgstr "Internal solid infill pattern" +msgstr "Motif de remplissage plein interne" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " "infill be enabled, the concentric pattern will be used for the small area." msgstr "" +"Modèle de ligne de remplissage interne. Si la détection d’un remplissage " +"interne étroit est activée, le modèle concentrique sera utilisé pour la " +"petite zone." msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" +"Largeur de la ligne de la paroi extérieure. Si elle est exprimée en %, elle " +"sera calculée sur le diamètre de la buse." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"This is the printing speed for the outer walls of parts. These are generally " -"printed slower than inner walls for higher quality." +"Vitesse de paroi extérieure qui est la plus à l'extérieur et visible. Elle " +"est généralement plus lente que la vitesse de la paroi interne pour obtenir " +"une meilleure qualité." msgid "Small perimeters" -msgstr "Small perimeters" +msgstr "Petits périmètres" msgid "" "This separate setting will affect the speed of perimeters having radius <= " @@ -10121,23 +12759,28 @@ msgid "" "example: 80%) it will be calculated on the outer wall speed setting above. " "Set to zero for auto." msgstr "" +"Ce paramètre séparé affectera la vitesse des périmètres ayant un rayon <= " +"petite longueur de périmètre (généralement des trous). S’il est exprimé en " +"pourcentage (par exemple : 80%), il sera calculé sur la vitesse de la paroi " +"extérieure ci-dessus. Mettre à zéro pour automatique." msgid "Small perimeters threshold" -msgstr "" +msgstr "Seuil des petits périmètres" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"Cela définit le seuil pour une petite longueur de périmètre. Le seuil par " +"défaut est de 0 mm" msgid "Walls printing order" -msgstr "" +msgstr "Ordre d’impression des parois" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10147,95 +12790,138 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" +"Séquence d'impression des parois internes (intérieures) et externes " +"(extérieures).\n" +"\n" +"Utilisez Intérieur/Extérieur pour obtenir les meilleurs surplombs. En effet, " +"les parois en surplomb peuvent adhérer à un périmètre voisin lors de " +"l'impression. Toutefois, cette option entraîne une légère diminution de la " +"qualité de la surface, car le périmètre externe est déformé par l'écrasement " +"du périmètre interne.\n" +"\n" +"Utilisez l’option Intérieur/Extérieur/Intérieur pour obtenir la meilleure " +"finition de surface externe et la meilleure précision dimensionnelle, car la " +"paroi externe est imprimée sans être dérangée par un périmètre interne. " +"Cependant, les performances de la paroi en surplomb seront réduites car il " +"n’y a pas de périmètre interne contre lequel imprimer la paroi externe. " +"Cette option nécessite un minimum de trois parois pour être efficace, car " +"elle imprime d’abord les parois internes à partir du troisième périmètre, " +"puis le périmètre externe et, enfin, le premier périmètre interne. Cette " +"option est recommandée par rapport à l’option Extérieur/intérieur dans la " +"plupart des cas.\n" +"\n" +"Utilisez l’option Extérieur/intérieur pour bénéficier de la même qualité de " +"paroi externe et de la même précision dimensionnelle que l’option Intérieur/" +"extérieur/intérieur. Cependant, les joints en z paraîtront moins cohérents " +"car la première extrusion d’une nouvelle couche commence sur une surface " +"visible." msgid "Inner/Outer" -msgstr "" +msgstr "Intérieur/Extérieur" msgid "Outer/Inner" -msgstr "" +msgstr "Extérieur/intérieur" msgid "Inner/Outer/Inner" -msgstr "" +msgstr "Intérieur/Extérieur/Intérieur" msgid "Print infill first" -msgstr "Print infill first" +msgstr "Imprimer d’abord le remplissage" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed " "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" +"Ordre des parois/remplissages. Lorsque la case n’est pas cochée, les parois " +"sont imprimées en premier, ce qui fonctionne le mieux dans la plupart des " +"cas.\n" +"\n" +"L’impression du remplissage en premier peut aider dans le cas de parois en " +"surplomb importantes, car les parois ont le remplissage adjacent auquel " +"adhérer. Cependant, le remplissage repoussera légèrement les parois " +"imprimées à l’endroit où il est fixé, ce qui se traduira par une moins bonne " +"finition de la surface extérieure. Cela peut également faire ressortir le " +"remplissage à travers les surfaces externes de la pièce." msgid "Wall loop direction" -msgstr "" +msgstr "Direction de la paroi" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" +"La direction dans laquelle les boucles de la paroi sont extrudées lorsque " +"l’on regarde du haut vers le bas.\n" +"\n" +"Par défaut, toutes les parois sont extrudées dans le sens inverse des " +"aiguilles d’une montre, sauf si l’option Inverser le sens des aiguilles " +"d’une montre est activée. Si vous choisissez une option autre qu’Auto, la " +"direction des parois sera forcée, indépendamment de l’option Inverser le " +"sens des aiguilles d’une montre.\n" +"\n" +"Cette option sera désactivée si le mode vase en spirale est activé." msgid "Counter clockwise" -msgstr "" +msgstr "Sens inverse des aiguilles d’une montre" msgid "Clockwise" -msgstr "" +msgstr "Dans le sens des aiguilles d’une montre" msgid "Height to rod" -msgstr "Height to rod" +msgstr "Hauteur jusqu’à la tige" msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"Distance from the nozzle tip to the lower rod. Used for collision avoidance " -"in by-object printing." +"Distance entre la pointe de la buse et la tige de carbone inférieure. " +"Utilisé pour éviter les collisions lors de l'impression \"par objets\"." msgid "Height to lid" -msgstr "Height to lid" +msgstr "Hauteur au couvercle" msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." msgstr "" -"Distance from the nozzle tip to the lid. Used for collision avoidance in by-" -"object printing." +"Distance entre la pointe de la buse et le capot. Utilisé pour éviter les " +"collisions lors de l'impression \"par objets\"." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." msgstr "" -"Clearance radius around extruder: used for collision avoidance in by-object " -"printing." +"Rayon de dégagement autour de l'extrudeur : utilisé pour éviter les " +"collisions lors de l'impression par objets." msgid "Nozzle height" -msgstr "Nozzle height" +msgstr "Hauteur de la buse" msgid "The height of nozzle tip." -msgstr "The height of nozzle tip." +msgstr "Hauteur de l’extrémité de la buse." msgid "Bed mesh min" -msgstr "" +msgstr "Maillage du plateau min" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10247,9 +12933,19 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" +"Cette option définit le point minimum de la zone de maillage du plateau " +"autorisée. En raison du décalage XY de la sonde, la plupart des imprimantes " +"ne sont pas en mesure de sonder l’ensemble du plateau. Pour s’assurer que le " +"point de palpage ne sort pas de la zone du plateau, les points minimum et " +"maximum du maillage du lit doivent être définis de manière appropriée. " +"Snapmaker Orca veille à ce que les valeurs adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max ne dépassent pas ces points min/max. Ces informations " +"peuvent généralement être obtenues auprès du fabricant de votre imprimante. " +"Le paramètre par défaut est (-99999, -99999), ce qui signifie qu’il n’y a " +"pas de limites, autorisant ainsi le palpage sur l’ensemble du plateau." msgid "Bed mesh max" -msgstr "" +msgstr "Maillage du plateau max" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10261,165 +12957,429 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" +"Cette option définit le point maximum de la zone de maillage du plateau " +"autorisée. En raison du décalage XY de la sonde, la plupart des imprimantes " +"ne sont pas en mesure de sonder l’ensemble du plateau. Pour s’assurer que le " +"point de palpage ne sort pas de la zone du plateau, les points minimum et " +"maximum du maillage du lit doivent être définis de manière appropriée. " +"Snapmaker Orca veille à ce que les valeurs adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max ne dépassent pas ces points min/max. Ces informations " +"peuvent généralement être obtenues auprès du fabricant de votre imprimante. " +"Le réglage par défaut est (99999, 99999), ce qui signifie qu’il n’y a pas de " +"limites, autorisant ainsi le palpage sur l’ensemble du plateau." msgid "Probe point distance" -msgstr "" +msgstr "Distance entre les points de mesure" msgid "" "This option sets the preferred distance between probe points (grid size) for " "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" +"Cette option définit la distance préférée entre les points de mesure (taille " +"de la grille) pour les directions X et Y, la valeur par défaut étant de 50 " +"mm pour les deux directions." msgid "Mesh margin" -msgstr "" +msgstr "Marge de la maille" msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." msgstr "" +"Cette option détermine la distance supplémentaire de laquelle le maillage du " +"plateau adaptatif doit être étendu dans les directions XY." + +msgid "Grab length" +msgstr "" msgid "Extruder Color" -msgstr "Extruder Color" +msgstr "Couleur de l'extrudeur" -msgid "Only used as a visual help on UI" -msgstr "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." +msgstr "Utilisé uniquement comme aide visuelle sur l'interface utilisateur" msgid "Extruder offset" -msgstr "Extruder offset" +msgstr "Décalage de l'extrudeur" msgid "Flow ratio" -msgstr "Flow ratio" +msgstr "Rapport de débit" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" -msgstr "" "The material may have volumetric change after switching between molten and " "crystalline states. This setting changes all extrusion flow of this filament " "in G-code proportionally. The recommended value range is between 0.95 and " "1.05. You may be able to tune this value to get a nice flat surface if there " "is slight overflow or underflow." - -msgid "Enable pressure advance" -msgstr "Enable pressure advance" +msgstr "" +"Le matériau peut avoir un changement volumétrique après avoir basculé entre " +"l'état fondu et l'état cristallin. Ce paramètre modifie proportionnellement " +"tout le débit d'extrusion de ce filament dans le G-code. La plage de valeurs " +"recommandée est comprise entre 0,95 et 1,05. Vous pouvez peut-être ajuster " +"cette valeur pour obtenir une belle surface plane en cas de léger " +"débordement ou sous-dépassement." msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Le matériau peut présenter un changement volumétrique après le passage de " +"l’état fondu à l’état cristallin. Ce paramètre modifie proportionnellement " +"tous les débits d’extrusion de ce filament dans le G-code. La valeur " +"recommandée est comprise entre 0,95 et 1,05. Vous pouvez peut-être ajuster " +"cette valeur pour obtenir une belle surface plate lorsqu’il y a un léger " +"débordement ou un sous-débordement.\n" +"\n" +"Le ratio de débit de l’objet final est cette valeur multipliée par le ratio " +"de débit du filament." + +msgid "Enable pressure advance" +msgstr "Activer la Pressure Advance" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" +"Activer le Pressure Advance, le résultat de l’auto calibration sera écrasé " +"une fois activé." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "Pressure Advance (Klipper) AKA Linear Advance (Marlin)" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Activer l’avance de pression adaptative (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" msgstr "" +"Avec l’augmentation des vitesses d’impression (et donc du débit volumétrique " +"à travers la buse) et des accélérations, il a été observé que la valeur " +"effective de PA diminue généralement. Cela signifie qu’une valeur PA unique " +"n’est pas toujours optimale à 100% pour toutes les caractéristiques et " +"qu’une valeur de compromis est généralement utilisée pour éviter de trop " +"bomber les caractéristiques avec une vitesse d’écoulement et des " +"accélérations plus faibles, tout en évitant de créer des lacunes sur les " +"caractéristiques plus rapides.\n" +"\n" +"Cette fonction vise à remédier à cette limitation en modélisant la réponse " +"du système d’extrusion de votre imprimante en fonction de la vitesse du flux " +"volumétrique et de l’accélération de l’impression. En interne, elle génère " +"un modèle ajusté qui peut extrapoler l’avance de pression nécessaire pour " +"une vitesse de flux volumétrique et une accélération données, qui est " +"ensuite transmise à l’imprimante en fonction des conditions d’impression " +"actuelles.\n" +"\n" +"Lorsqu’elle est activée, la valeur de l’avance de pression ci-dessus est " +"remplacée. Cependant, une valeur par défaut raisonnable est fortement " +"recommandée pour servir de solution de secours et en cas de changement " +"d’outil.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Mesures adaptatives de l’avance de pression (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Ajouter des séries de valeurs d'avance de pression (PA), les vitesses de " +"débit volumétrique et les accélérations auxquelles elles ont été mesurées, " +"séparées par une virgule. Un ensemble de valeurs par ligne. Par exemple\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Comment calibrer :\n" +"1. Effectuer le test d’avance de pression pour au moins 3 vitesses par " +"valeur d’accélération. Il est recommandé d’effectuer le test pour au moins " +"la vitesse des périmètres externes, la vitesse des périmètres internes et la " +"vitesse d’impression de la caractéristique la plus rapide de votre profil " +"(en général, il s’agit du remplissage clairsemé ou plein). Ensuite, il faut " +"les exécuter aux mêmes vitesses pour les accélérations d’impression les plus " +"lentes et les plus rapides, et pas plus vite que l’accélération maximale " +"recommandée par le modeleur d’entrée de klipper.\n" +"2. Notez la valeur optimale de PA pour chaque vitesse de débit volumétrique " +"et accélération. Vous pouvez trouver le numéro de débit en sélectionnant le " +"débit dans le menu déroulant du schéma de couleurs et en déplaçant le " +"curseur horizontal sur les lignes du schéma PA. Le chiffre doit être visible " +"en bas de la page. La valeur idéale du PA devrait diminuer au fur et à " +"mesure que le débit volumétrique augmente. Si ce n’est pas le cas, vérifiez " +"que votre extrudeur fonctionne correctement. Plus vous imprimez lentement et " +"avec peu d’accélération, plus la plage des valeurs PA acceptables est " +"grande. Si aucune différence n’est visible, utilisez la valeur PA du test le " +"plus rapide.\n" +"3 Entrez les triplets de valeurs PA, de débit et d’accélérations dans la " +"zone de texte ici et sauvegardez votre profil de filament." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" +"Activation de l’avance de pression adaptative pour les surplombs (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Activer le PA adaptatif pour les surplombs ainsi que pour les changements de " +"débit au sein d’un même élément. Il s’agit d’une option expérimentale, car " +"si le profil PA n’est pas défini avec précision, il entraînera des problèmes " +"d’uniformité sur les surfaces externes avant et après les surplombs.\n" + +msgid "Pressure advance for bridges" +msgstr "Avance de pression pour les ponts" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Valeur de l’avance de pression pour les ponts. Régler à 0 pour désactiver.\n" +"\n" +" Une valeur PA plus faible lors de l’impression de ponts permet de réduire " +"l’apparition d’une légère sous-extrusion immédiatement après les ponts. Ce " +"phénomène est dû à la chute de pression dans la buse lors de l’impression " +"dans l’air et une valeur PA plus faible permet d’y remédier." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." msgstr "" +"Largeur de ligne par défaut si les autres largeurs de ligne sont fixées à 0. " +"Si elle est exprimée en %, elle sera calculée sur le diamètre de la buse." msgid "Keep fan always on" -msgstr "Keep fan always on" +msgstr "Garder le ventilateur toujours actif" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" -msgstr "" -"Enabling this setting means that part cooling fan will never stop entirely " -"and will instead run at least at minimum speed to reduce the frequency of " +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " "starting and stopping." +msgstr "" +"Si ce paramètre est activé, le ventilateur de refroidissement des pièces ne " +"sera jamais arrêté et fonctionnera au moins à la vitesse minimale pour " +"réduire la fréquence de démarrage et d'arrêt" msgid "Don't slow down outer walls" -msgstr "" +msgstr "Ne pas ralentir sur les parois extérieures" +#, fuzzy msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"S’il est activé, ce paramètre garantit que les périmètres externes ne sont " +"pas ralentis pour respecter la durée minimale de la couche. Ceci est " +"particulièrement utile dans les scénarios suivants :\n" +"1. Pour éviter les changements de brillance lors de l’impression de " +"filaments brillants\n" +"2. Pour éviter les changements de vitesse des parois externes qui peuvent " +"créer de légers artefacts de paroi qui apparaissent comme des bandes en z.\n" +"3. Pour éviter d’imprimer à des vitesses qui provoquent des VFA (artefacts " +"fins) sur les parois externes." msgid "Layer time" -msgstr "Layer time" +msgstr "Temps de couche" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" -msgstr "" -"The part cooling fan will be enabled for layers where the estimated time is " -"shorter than this value. Fan speed is interpolated between the minimum and " "maximum fan speeds according to layer printing time." +msgstr "" +"Le ventilateur de refroidissement des pièces sera activé pour les couches " +"dont le temps estimé est inférieur à cette valeur. La vitesse du ventilateur " +"est interpolée entre les vitesses minimale et maximale du ventilateur en " +"fonction du temps d'impression de la couche" msgid "Default color" -msgstr "Default color" +msgstr "Couleur par défaut" -msgid "Default filament color" -msgstr "Default filament color" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" -msgstr "Filament notes" +msgstr "Notes du filament" msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." +msgstr "Vous pouvez mettre vos notes concernant le filament ici." msgid "Required nozzle HRC" -msgstr "Required nozzle HRC" +msgstr "Buse HRC requise" msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"Minimum HRC of nozzle required to print the filament. A value of 0 means no " -"checking of the nozzle's HRC." +"Dureté HRC minimum de la buse requis pour imprimer le filament. Une valeur " +"de 0 signifie qu'il n'y a pas de vérification de la dureté HRC de la buse." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" -"This setting is the volume of filament that can be melted and extruded per " -"second. Printing speed is limited by max volumetric speed, in case of too " -"high and unreasonable speed setting. This value cannot be zero." - -msgid "mm³/s" -msgstr "mm³/s" +"Ce paramètre correspond au volume de filament qui peut être fondu et extrudé " +"par seconde. La vitesse d'impression sera limitée par la vitesse " +"volumétrique maximale en cas de réglage de vitesse déraisonnablement trop " +"élevé. Cette valeur ne peut pas être nulle" msgid "Filament load time" -msgstr "Filament load time" +msgstr "Temps de chargement du filament" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Time to load new filament when switching filament, for statistical purposes " -"only." +"Temps nécessaire pour charger un nouveau filament lors d’un changement de " +"filament. Ce paramètre s’applique généralement aux machines multi-matériaux " +"à un seul extrudeur. La valeur est généralement de 0 pour les changeurs " +"d’outils ou les machines multi-outils. Pour les statistiques uniquement" msgid "Filament unload time" -msgstr "Filament unload time" - -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "" -"Time to unload old filament when switching filament, for statistical " -"purposes only." +msgstr "Temps de déchargement du filament" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Filament diameter is used to calculate extrusion variables in G-code, so it " -"is important that this is accurate and precise." +"Temps nécessaire pour décharger l’ancien filament lors du changement de " +"filament. Ce paramètre s’applique généralement aux machines multi-matériaux " +"à un seul extrudeur. Pour les changeurs d’outils ou les machines multi-" +"outils, il est généralement égal à 0. Pour les statistiques uniquement" + +msgid "Tool change time" +msgstr "Délais nécessaire au changement d’outil" + +msgid "" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Durée nécessaire pour changer d’outil. Il s’applique généralement aux " +"changeurs d’outils ou aux machines multi-outils. Pour les machines multi-" +"matériaux mono-extrudeuses, il est généralement égal à 0. Pour les " +"statistiques uniquement" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"Le diamètre du filament est utilisé pour calculer les variables d'extrusion " +"dans le G-code, il est donc important qu'il soit exact et précis." msgid "Pellet flow coefficient" -msgstr "" +msgstr "Coefficient d’écoulement des pellets" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10427,76 +13387,146 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"Le coefficient d’écoulement des pellets est dérivé de manière empirique et " +"permet de calculer le volume des imprimantes à pellets.\n" +"\n" +"En interne, il est converti en diamètre de filament. Tous les autres calculs " +"de volume restent inchangés.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" msgstr "" +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Rétrécissement (XY)" + #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +"Entrez le pourcentage de rétrécissement que le filament obtiendra après " +"refroidissement (94% si vous mesurez 94mm au lieu de 100mm). La pièce sera " +"mise à l’échelle en XY pour compenser. Seul le filament utilisé pour le " +"périmètre est pris en compte.\n" +"Veillez à laisser suffisamment d’espace entre les objets, car cette " +"compensation est effectuée après les contrôles." + +msgid "Shrinkage (Z)" +msgstr "Rétrécissement (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Entrez le pourcentage de rétrécissement que le filament obtiendra après " +"refroidissement (94% si vous mesurez 94mm au lieu de 100mm). La pièce sera " +"mise à l’échelle en Z pour compenser." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" -msgstr "" +msgstr "Vitesse de chargement" msgid "Speed used for loading the filament on the wipe tower." -msgstr "" +msgstr "Vitesse utilisée pour charger le filament sur la tour d’essuyage." msgid "Loading speed at the start" -msgstr "" +msgstr "Vitesse de chargement au démarrage" msgid "Speed used at the very beginning of loading phase." -msgstr "" +msgstr "Vitesse utilisée au tout début de la phase de chargement." msgid "Unloading speed" -msgstr "" +msgstr "Vitesse de déchargement" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming)." -msgstr "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." +msgstr "" +"Vitesse utilisée pour le déchargement du filament sur la tour d’essuyage " +"(n’affecte pas la partie initiale de retrait juste après le pilonnage)." msgid "Unloading speed at the start" -msgstr "" +msgstr "Vitesse de déchargement au démarrage" msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" +"Vitesse utilisée pour décharger la pointe du filament immédiatement après le " +"pilonnage." msgid "Delay after unloading" -msgstr "" +msgstr "Délai après déchargement" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions." -msgstr "" "Time to wait after the filament is unloaded. May help to get reliable tool " "changes with flexible materials that may need more time to shrink to " "original dimensions." +msgstr "" +"Délai une fois le filament déchargé. Peut aider à obtenir des changements " +"d’outils fiables avec des matériaux flexibles qui peuvent nécessiter plus de " +"temps pour revenir aux dimensions d’origine." msgid "Number of cooling moves" -msgstr "" +msgstr "Nombre de mouvements de refroidissement" msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" +"Le filament est refroidi en étant déplacé d’avant en arrière dans les tubes " +"de refroidissement. Précisez le nombre souhaité de ces mouvements." + +msgid "Stamping loading speed" +msgstr "Vitesse de chargement du marquage" + +msgid "Speed used for stamping." +msgstr "Vitesse utilisée pour le marquage." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" +"Distance de marquage mesurée à partir du centre du tube de refroidissement" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Si la valeur est différente de zéro, le filament est déplacé vers la buse " +"entre les différents mouvements de refroidissement («  marquage »). Cette " +"option permet de configurer la durée de ce mouvement avant que le filament " +"ne soit à nouveau rétracté." msgid "Speed of the first cooling move" -msgstr "" +msgstr "Vitesse du premier mouvement de refroidissement" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" +"Les mouvements de refroidissement s’accélèrent progressivement à partir de " +"cette vitesse." msgid "Minimal purge on wipe tower" -msgstr "Minimal purge on wipe tower" +msgstr "Purge minimale sur la tour d’essuyage" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -10505,187 +13535,280 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" +"Après un changement d’outil, la position exacte du filament nouvellement " +"chargé à l’intérieur de la buse peut ne pas être connue et la pression du " +"filament n’est probablement pas encore stable. Avant de purger la tête " +"d’impression dans un remplissage ou un objet, Snapmaker Orca amorcera toujours " +"cette quantité de matériau dans la tour d’essuyage pour purger dans les " +"remplissages ou objets de manière fiable." msgid "Speed of the last cooling move" -msgstr "" +msgstr "Vitesse du dernier mouvement de refroidissement" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" - -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" +"Les mouvements de refroidissement s’accélèrent progressivement vers cette " +"vitesse." msgid "Ramming parameters" -msgstr "" +msgstr "Paramètres de pilonnage" msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" +"Cette chaîne est éditée par RammingDialog et contient des paramètres " +"spécifiques au pilonnage." + +msgid "Enable ramming for multi-tool setups" +msgstr "Activer le pilonnage pour les configurations multi-outils" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" +"Effectuez un pilonnage lorsque vous utilisez une imprimante multi-outils " +"(c’est-à-dire lorsque l’option ‘Multi-matériau à extrudeur unique’ dans les " +"paramètres de l’imprimante n’est pas cochée). Une fois vérifié, une petite " +"quantité de filament est rapidement extrudée sur la tour d’essuyage juste " +"avant le changement d’outil. Cette option n’est utilisée que lorsque la tour " +"d’essuyage est activée." -msgid "Enable ramming for multitool setups" -msgstr "" +msgid "Multi-tool ramming volume" +msgstr "Volume du pilonnage multi-outils" -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." -msgstr "" +msgid "The volume to be rammed before the tool change." +msgstr "Volume à pilonner avant le changement d’outil." -msgid "Multitool ramming volume" -msgstr "" +msgid "Multi-tool ramming flow" +msgstr "Débit du pilonnage multi-outils" -msgid "The volume to be rammed before the toolchange." -msgstr "" - -msgid "Multitool ramming flow" -msgstr "" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "" +msgid "Flow used for ramming the filament before the tool change." +msgstr "Débit utilisé pour pilonner le filament avant le changement d’outil." msgid "Density" -msgstr "Density" +msgstr "Densité" -msgid "Filament density. For statistics only" -msgstr "Filament density, for statistical purposes only." +msgid "Filament density. For statistics only." +msgstr "Densité des filaments. Pour les statistiques uniquement" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" -msgstr "Filament material type" +msgid "The material type of filament." +msgstr "Le type de matériau du filament" msgid "Soluble material" -msgstr "Soluble material" +msgstr "Matériau soluble" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" +"Le matériau soluble est couramment utilisé pour imprimer le support et " +"l'interface de support" + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." msgstr "" -"Soluble material is commonly used to print support and support interfaces" msgid "Support material" -msgstr "Support material" +msgstr "Supports" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"Le matériau de support est généralement utilisé pour imprimer le support et " +"les interfaces de support" + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" -"Support material is commonly used to print support and support interfaces." msgid "Softening temperature" -msgstr "Softening temperature" +msgstr "Température de vitrification" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" -"The material softens at this temperature, so when the bed temperature is " "equal to or greater than this, it's highly recommended to open the front " -"door and/or remove the upper glass to avoid clogs." +"door and/or remove the upper glass to avoid clogging." +msgstr "" +"Température où le matériau se ramollit. Lorsque la température du plateau " +"est égale ou supérieure à celle-ci, il est fortement recommandé d’ouvrir la " +"porte avant et/ou de retirer la vitre supérieure pour éviter les problèmes " +"d’obstruction." msgid "Price" -msgstr "Price" +msgstr "Tarif" -msgid "Filament price. For statistics only" -msgstr "Filament price, for statistical purposes only." +msgid "Filament price. For statistics only." +msgstr "Coût ​​du filament. Pour les statistiques uniquement" msgid "money/kg" -msgstr "money/kg" +msgstr "argent/kg" msgid "Vendor" -msgstr "Vendor" +msgstr "Fabriquant" -msgid "Vendor of filament. For show only" -msgstr "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." +msgstr "Vendeur du filament. Pour affichage uniquement" msgid "(Undefined)" -msgstr "(Undefined)" +msgstr "(Indéfini)" msgid "Sparse infill direction" -msgstr "" +msgstr "Direction du remplissage" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"This is the angle for sparse infill pattern, which controls the start or " -"main direction of lines." +"Angle pour le motif de remplissage qui contrôle le début ou la direction " +"principale de la ligne" msgid "Solid infill direction" -msgstr "" +msgstr "Direction du remplissage" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" +"Angle pour le motif de remplissage, qui contrôle le début ou la direction " +"principale de la ligne" msgid "Sparse infill density" -msgstr "Sparse infill density" +msgstr "Densité de remplissage" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" +"Densité du remplissage interne, 100% transforme tous les remplissages en " +"remplissages pleins et le modèle de remplissage interne sera utilisé" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" -msgstr "Sparse infill pattern" +msgstr "Motif de remplissage" -msgid "Line pattern for internal sparse infill" -msgstr "This is the line pattern for internal sparse infill." +msgid "Line pattern for internal sparse infill." +msgstr "Motif de ligne du remplissage interne" -msgid "Grid" -msgstr "Grid" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" -msgstr "Line" +msgstr "Ligne" -msgid "Cubic" -msgstr "Cubic" +msgid "Grid" +msgstr "Grille" msgid "Tri-hexagon" -msgstr "Tri-hexagon" +msgstr "Tri-hexagone" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Honeycomb" +msgid "Cubic" +msgstr "Cubique" msgid "Adaptive Cubic" -msgstr "Adaptive Cubic" +msgstr "Cubique adaptatif" -msgid "3D Honeycomb" -msgstr "3D Honeycomb" +msgid "Quarter Cubic" +msgstr "Quartier Cubique" msgid "Support Cubic" -msgstr "Support Cubic" +msgstr "Support Cubique" msgid "Lightning" msgstr "Lightning" +msgid "Honeycomb" +msgstr "Nid d'abeille" + +msgid "3D Honeycomb" +msgstr "Nid d'abeille 3D" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "Treillis 2D" + msgid "Cross Hatch" -msgstr "Cross Hatch" +msgstr "Quadrillage" + +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroïde" + +msgid "Lateral lattice angle 1" +msgstr "Angle de treillis 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Angle du premier ensemble d’éléments de treillis 2D dans la direction Z. " +"Zéro correspond à la verticale." + +msgid "Lateral lattice angle 2" +msgstr "Angle de treillis 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Angle de la deuxième série d’éléments de treillis 2D dans la direction Z. " +"Zéro correspond à la verticale." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" msgid "Sparse infill anchor length" -msgstr "" +msgstr "Longueur de l’ancrage de remplissage interne" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -10695,19 +13818,28 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" +"Connecter une ligne de remplissage à un périmètre interne avec un court " +"segment de périmètre supplémentaire. S’il est exprimé en pourcentage " +"(exemple : 15%), il est calculé sur la largeur de l’extrusion de " +"remplissage. Si aucun segment de périmètre plus court que infill_anchor_max " +"n’est trouvé, la ligne de remplissage est connectée à un segment de " +"périmètre d’un seul côté et la longueur du segment de périmètre pris est " +"limitée à ce paramètre, mais pas plus long que anchor_length_max.\n" +"Une valeur à 0 désactive les périmètres d’ancrage connectés à une seule " +"ligne de remplissage." msgid "0 (no open anchors)" -msgstr "0 (no open anchors)" +msgstr "0 (aucune ancre ouverte)" msgid "1000 (unlimited)" -msgstr "1000 (unlimited)" +msgstr "1000 (illimité)" msgid "Maximum length of the infill anchor" -msgstr "" +msgstr "Longueur maximale de l’ancrage de remplissage" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -10717,141 +13849,179 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" +"Connecter une ligne de remplissage à un périmètre interne avec un court " +"segment de périmètre supplémentaire. S’il est exprimé en pourcentage " +"(exemple : 15 %), il est calculé sur la largeur de l’extrusion de " +"remplissage. Snapmaker Orca essaie de connecter deux lignes de remplissage " +"proches à un court segment de périmètre. Si aucun segment de périmètre plus " +"court que ce paramètre n’est trouvé, la ligne de remplissage est connectée à " +"un segment de périmètre sur un seul côté et la longueur du segment de " +"périmètre pris est limitée à infill_anchor, mais pas plus longue que ce " +"paramètre.\n" +"S’il est défini sur 0, l’ancien algorithme de connexion de remplissage sera " +"utilisé, il devrait créer le même résultat qu’avec 1000 et 0." msgid "0 (Simple connect)" -msgstr "" +msgstr "0 (connexions simples)" -msgid "Acceleration of outer walls" -msgstr "" +msgid "Acceleration of outer walls." +msgstr "Accélération des parois extérieures" -msgid "Acceleration of inner walls" -msgstr "" +msgid "Acceleration of inner walls." +msgstr "Accélération des parois intérieures" -msgid "Acceleration of travel moves" -msgstr "" +msgid "Acceleration of travel moves." +msgstr "Accélération des déplacements" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" -"This is the acceleration of top surface infill. Using a lower value may " -"improve top surface quality." +"Il s'agit de l'accélération de la surface supérieure du remplissage. " +"Utiliser une valeur plus petite pourrait améliorer la qualité de la surface " +"supérieure" -msgid "Acceleration of outer wall. Using a lower value can improve quality" -msgstr "Acceleration of outer wall: using a lower value can improve quality." +msgid "Acceleration of outer wall. Using a lower value can improve quality." +msgstr "" +"Accélération de la paroi extérieur : l'utilisation d'une valeur inférieure " +"peut améliorer la qualité" msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." msgstr "" +"Accélération des ponts. Si la valeur est exprimée en pourcentage (par " +"exemple 50%), elle sera calculée en fonction de l’accélération de la paroi " +"extérieure." msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² ou %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Accélération du remplissage interne. Si la valeur est exprimée en " +"pourcentage (par exemple 100%), elle sera calculée en fonction de " +"l’accélération par défaut." msgid "" "Acceleration of internal solid infill. If the value is expressed as a " "percentage (e.g. 100%), it will be calculated based on the default " "acceleration." msgstr "" +"Accélération du remplissage interne. Si la valeur est exprimée en " +"pourcentage (par exemple 100%), elle sera calculée en fonction de " +"l’accélération par défaut." msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" -"This is the printing acceleration for the first layer. Using limited " -"acceleration can improve build plate adhesion." +"Accélération de la couche initiale. L'utilisation d'une valeur plus basse " +"peut améliorer l'adhérence sur le plateau" msgid "Enable accel_to_decel" -msgstr "Enable accel_to_decel" +msgstr "Activer l’accélération à la décélération" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "Le paramètre max_accel_to_decel de Klipper sera ajusté automatiquement" msgid "accel_to_decel" -msgstr "accel_to_decel" +msgstr "ajuster l’accélération à la décélération" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." +msgstr "" +"Le paramètre max_accel_to_decel de Klipper sera ajusté à %% d'accélération" + +msgid "Default jerk." msgstr "" -msgid "Jerk of outer walls" -msgstr "Jerk of outer walls" - -msgid "Jerk of inner walls" -msgstr "Jerk of inner walls" - -msgid "Jerk for top surface" +msgid "Junction Deviation" msgstr "" -msgid "Jerk for infill" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." msgstr "" -msgid "Jerk for initial layer" -msgstr "" +msgid "Jerk of outer walls." +msgstr "Jerk des parois extérieures" -msgid "Jerk for travel" -msgstr "" +msgid "Jerk of inner walls." +msgstr "Jerk des parois intérieures" + +msgid "Jerk for top surface." +msgstr "Jerk des surfaces supérieures" + +msgid "Jerk for infill." +msgstr "Jerk du remplissage" + +msgid "Jerk for initial layer." +msgstr "Jerk de la couche initiale" + +msgid "Jerk for travel." +msgstr "Jerk des déplacements" msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" +"Largeur de la ligne de la couche initiale. Si elle est exprimée en %, elle " +"sera calculée sur le diamètre de la buse." msgid "Initial layer height" -msgstr "First layer height" +msgstr "Hauteur de couche initiale" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" -msgstr "" -"This is the height of the first layer. Making the first layer height thicker " "can improve build plate adhesion." - -msgid "Speed of initial layer except the solid infill part" msgstr "" -"This is the speed for the first layer except for solid infill sections." +"Il s'agit de la hauteur de la première couche. L'augmentation de la hauteur " +"de la première couche peut améliorer l'adhérence sur le plateau" + +msgid "Speed of initial layer except the solid infill part." +msgstr "Vitesse de la couche initiale à l'exception du remplissage" msgid "Initial layer infill" -msgstr "First layer infill" +msgstr "Remplissage de la couche initiale" -msgid "Speed of solid infill part of initial layer" -msgstr "This is the speed for solid infill parts of the first layer." +msgid "Speed of solid infill part of initial layer." +msgstr "Vitesse du remplissage à la couche initiale" msgid "Initial layer travel speed" -msgstr "" +msgstr "Déplacements" -msgid "Travel speed of initial layer" -msgstr "" +msgid "Travel speed of initial layer." +msgstr "Vitesse de déplacement de la couche initiale" -#, fuzzy msgid "Number of slow layers" -msgstr "This is the number of top interface layers." +msgstr "Nombre de couches lentes" msgid "" "The first few layers are printed slower than normal. The speed is gradually " "increased in a linear fashion over the specified number of layers." msgstr "" +"Les premières couches sont imprimées plus lentement que la normale. La " +"vitesse augmente progressivement de manière linéaire sur le nombre de " +"couches spécifié." msgid "Initial layer nozzle temperature" -msgstr "First layer nozzle temperature" +msgstr "Température de la buse de couche initiale" -msgid "Nozzle temperature to print initial layer when using this filament" -msgstr "Nozzle temperature for printing the first layer with this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." +msgstr "" +"Température de la buse pour imprimer la couche initiale lors de " +"l'utilisation de ce filament" msgid "Full fan speed at layer" -msgstr "Full fan speed at layer" +msgstr "Ventilateur à pleine vitesse à la couche" msgid "" "Fan speed will be ramped up linearly from zero at layer " @@ -10860,206 +14030,388 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" +"La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à " +"la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" sera ignoré s’il est " +"inférieur à \"close_fan_the_first_x_layers\", auquel cas le ventilateur " +"fonctionnera à la vitesse maximale autorisée à la couche " +"\"close_fan_the_first_x_layers\" + 1." msgid "layer" -msgstr "" +msgstr "couche" msgid "Support interface fan speed" +msgstr "Vitesse du ventilateur" + +msgid "" +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"La vitesse du ventilateur de refroidissement des pièces est appliquée lors " +"de l’impression des interfaces de support. Le réglage de ce paramètre à une " +"vitesse supérieure à la vitesse normale réduit la force de liaison de la " +"couche entre les supports et la pièce supportée, ce qui les rend plus " +"faciles à séparer.\n" +"La valeur -1 permet de désactiver ce paramètre.\n" +"Ce paramètre est remplacé par disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Vitesse du ventilateur des ponts internes" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Vitesse du ventilateur de refroidissement de la pièce utilisée pour tous les " +"ponts internes. Réglez-la à -1 pour utiliser les paramètres de vitesse du " +"ventilateur de surplomb à la place.\n" +"\n" +"La réduction de la vitesse du ventilateur des ponts internes, par rapport à " +"la vitesse normale du ventilateur, peut aider à réduire le gauchissement des " +"pièces dû à un refroidissement excessif appliqué sur une grande surface " +"pendant une période de temps prolongée." + +msgid "Ironing fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"This setting makes the toolhead randomly jitter while printing walls so that " -"the surface has a rough textured look. This setting controls the fuzzy " -"position." +"Gigue aléatoire lors de l'impression de la paroi, de sorte que la surface " +"ait un aspect rugueux. Ce réglage contrôle la position irrégulière" msgid "Contour" msgstr "Contour" msgid "Contour and hole" -msgstr "Contour and hole" +msgstr "Contour et trou" msgid "All walls" -msgstr "All walls" +msgstr "Toutes les parois" msgid "Fuzzy skin thickness" -msgstr "Fuzzy skin thickness" +msgstr "Épaisseur de la surface Irrégulière" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"The width of jittering: it’s recommended to keep this lower than the outer " -"wall line width." +"La largeur à l'intérieur de laquelle jitter. Il est déconseillé d'être en " +"dessous de la largeur de la ligne de la paroi extérieure" msgid "Fuzzy skin point distance" -msgstr "Fuzzy skin point distance" +msgstr "Distance de point de la surface irrégulière" msgid "" -"The average diatance between the random points introducded on each line " -"segment" -msgstr "" "The average distance between the random points introduced on each line " -"segment" +"segment." +msgstr "" +"La distance moyenne entre les points aléatoires introduits sur chaque " +"segment de ligne" msgid "Apply fuzzy skin to first layer" +msgstr "Appliquer la surface irrégulière sur la première couche" + +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Application ou non d’une surface irrégulière sur la première couche" + +msgid "Fuzzy skin generator mode" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." msgstr "" +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Combiné" + +msgid "Fuzzy skin noise type" +msgstr "Type de bruit de surface irrégulière" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Type de bruit à utiliser pour la génération de surfaces irrégulières.\n" +"Classique : Bruit aléatoire uniforme classique.\n" +"Perlin : Bruit de Perlin, qui donne une texture plus cohérente.\n" +"Billow : Similaire au bruit de perlin, mais plus grossier.\n" +"Multifractal strié : Bruit en forme de crête avec des caractéristiques " +"nettes et irrégulières. Crée des textures semblables à des marbres.\n" +"Voronoï : Divise la surface en cellules de Voronoï et déplace chacune " +"d’entre elles de manière aléatoire. Crée une texture en patchwork." + +msgid "Classic" +msgstr "Classique" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Multifractal strié" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Taille des caractéristiques de la surface irrégulière" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Taille de base des caractéristiques de bruit cohérent, en mm. Des valeurs " +"plus élevées se traduiront par des caractéristiques plus grandes." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Octaves de bruits de surface irrégulière" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Nombre d’octaves de bruit cohérent à utiliser. Des valeurs plus élevées " +"augmentent le niveau de détail du bruit, mais aussi le temps de calcul." + +msgid "Fuzzy skin noise persistence" +msgstr "Persistance du bruit de la surface irrégulière" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Taux de décroissance des octaves supérieures du bruit cohérent. Des valeurs " +"plus faibles permettent d’obtenir un bruit plus doux." + msgid "Filter out tiny gaps" -msgstr "Filter out tiny gaps" +msgstr "Filtrer les petits espaces" msgid "Layers and Perimeters" -msgstr "Layers and Perimeters" +msgstr "Couches et Périmètres" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" +"Ne pas imprimer le remplissage des espaces dont la longueur est inférieure " +"au seuil spécifié (en mm). Ce paramètre s’applique aux remplissages " +"supérieur, inférieur et solide et, si vous utilisez le générateur de " +"périmètre classique, pour le remplissage de la paroi." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" -"This is the speed for gap infill. Gaps usually have irregular line width and " -"should be printed more slowly." +"Vitesse de remplissage des espaces. L’espace a généralement une largeur de " +"ligne irrégulière et doit être imprimé plus lentement" msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "Hauteur précise du Z" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." +"Activez cette option pour obtenir une hauteur z précise de l’objet après la " +"découpe. La hauteur précise de l’objet sera obtenue en affinant les hauteurs " +"des dernières couches. Notez qu’il s’agit d’un paramètre expérimental." msgid "Arc fitting" -msgstr "Arc fitting" +msgstr "Tracer des arcs" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" +"Activez cette option pour obtenir un fichier G-code contenant les " +"déplacements G2 et G3. La tolérance d’ajustement est la même que la " +"résolution.\n" +"\n" +"Note : Pour les machines Klipper, il est recommandé de désactiver cette " +"option. Klipper ne bénéficie pas des commandes d’arc car celles-ci sont à " +"nouveau divisées en segments de ligne par le micrologiciel. Il en résulte " +"une réduction de la qualité de la surface, car les segments de ligne sont " +"convertis en arcs par le slicer, puis à nouveau en segments par le firmware." msgid "Add line number" -msgstr "Add line number" +msgstr "Ajouter un numéro de ligne" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" -"Enable this to add line number(Nx) at the beginning of each G-Code line." +"Activez cette option pour ajouter un numéro de ligne (Nx) au début de chaque " +"ligne G-Code." msgid "Scan first layer" -msgstr "Scan first layer" +msgstr "Analyser la première couche" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" -"Enable this to allow the camera on the printer to check the quality of the " -"first layer." +"Activez cette option pour permettre à l'appareil photo de l'imprimante de " +"vérifier la qualité de la première couche" msgid "Nozzle type" -msgstr "Nozzle type" +msgstr "Type de buse" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" -"The metallic material of the nozzle: This determines the abrasive resistance " -"of the nozzle and what kind of filament can be printed." +"Le matériau métallique de la buse. Cela détermine la résistance à l'abrasion " +"de la buse et le type de filament pouvant être imprimé" msgid "Undefine" -msgstr "Undefined" +msgstr "Non défini" msgid "Hardened steel" -msgstr "Hardened steel" +msgstr "Acier trempé" msgid "Stainless steel" -msgstr "Stainless steel" +msgstr "Acier inoxydable" + +msgid "Tungsten carbide" +msgstr "" msgid "Brass" -msgstr "Brass" +msgstr "Laiton" msgid "Nozzle HRC" -msgstr "Nozzle HRC" +msgstr "Dureté HRC buse" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " "slicing." msgstr "" -"The nozzle's hardness. Zero means no checking for nozzle hardness during " -"slicing." +"La dureté de la buse. Zéro signifie qu'il n'est pas nécessaire de vérifier " +"la dureté de la buse pendant la découpe." msgid "HRC" msgstr "HRC" msgid "Printer structure" -msgstr "Printer structure" +msgstr "Structure de l’imprimante" -msgid "The physical arrangement and components of a printing device" -msgstr "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." +msgstr "Disposition physique et les composants du périphérique d’impression" msgid "CoreXY" -msgstr "" +msgstr "CoreXY" msgid "I3" -msgstr "" +msgstr "I3" msgid "Hbot" -msgstr "" +msgstr "Hbot" msgid "Delta" -msgstr "" +msgstr "Delta" msgid "Best object position" -msgstr "Best object position" +msgstr "Meilleure position d’organisation automatique" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "Best auto arranging position in range [0,1] w.r.t. bed shape." +msgstr "" +"Meilleure position d’organisation automatique dans la plage [0,1] par " +"rapport à forme du plateau." msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" +"Activer cette option si l’imprimante est équipée d'un ventilateur de " +"refroidissement auxiliaire. Commande G-code : M106 P2 S (0-255)." msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" +"Démarrer le ventilateur plus tôt de ce nombre de secondes par rapport au " +"démarrage cible (vous pouvez utiliser des fractions de secondes). Cela " +"suppose une accélération infinie pour cette estimation de durée et ne prend " +"en compte que les mouvements G1 et G0 (l’ajustement arc n’est pas pris en " +"charge).\n" +"Cela ne déplacera pas les commandes de ventilateur des G-codes personnalisés " +"(ils agissent comme une sorte de \"barrière\").\n" +"Cela ne déplacera pas les commandes de ventilateur dans le G-code de " +"démarrage si seul le ‘G-code de démarrage personnalisé’ est activé.\n" +"Utiliser 0 pour désactiver." msgid "Only overhangs" -msgstr "" +msgstr "Sur les surplombs uniquement" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "" +msgstr "Ne prend en compte que le délai de refroidissement des surplombs." msgid "Fan kick-start time" -msgstr "" +msgstr "Durée de démarrage du ventilateur" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to " @@ -11068,98 +14420,260 @@ msgid "" "fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" +"Émettre une commande de vitesse maximale du ventilateur pendant ce nombre de " +"secondes avant de réduire à la vitesse cible pour démarrer le ventilateur de " +"refroidissement.\n" +"Ceci est utile pour les ventilateurs où un faible PWM/puissance peut être " +"insuffisant pour redémarrer le ventilateur après un arrêt, ou pour faire " +"démarrer le ventilateur plus rapidement.\n" +"Mettre à 0 pour désactiver." msgid "Time cost" -msgstr "" +msgstr "Coût horaire" -msgid "The printer cost per hour" -msgstr "" +msgid "The printer cost per hour." +msgstr "Coût horaire de l’imprimante" msgid "money/h" -msgstr "" +msgstr "€/heure" msgid "Support control chamber temperature" -msgstr "Support controlling chamber temperature" +msgstr "Contrôle de température du caisson" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" +"Activez cette option si la machine prend en charge le contrôle de la " +"température du caisson\n" +"Commande de G-code : M141 S(0-255)" msgid "Support air filtration" -msgstr "Support air filtration" +msgstr "Filtration de l’air" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" +"Activez cette option si l’imprimante prend en charge la filtration de l’air\n" +"Commande G-code : M106 P3 S(0-255)" msgid "G-code flavor" -msgstr "G-code flavor" +msgstr "Version du G-code" -msgid "What kind of gcode the printer is compatible with" -msgstr "What kind of G-code the printer is compatible with." +msgid "What kind of G-code the printer is compatible with." +msgstr "Avec quel type de G-code l'imprimante est-elle compatible." msgid "Klipper" -msgstr "" +msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "Imprimante à pellets" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" +"Activez cette option si votre imprimante utilise des pellets au lieu de " +"filaments" msgid "Support multi bed types" -msgstr "" +msgstr "Prise en charge de plusieurs types de plateaux" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" +"Activez cette option si vous souhaitez utiliser plusieurs types de plateaux" msgid "Label objects" -msgstr "" +msgstr "Label Objects" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" +"Permet d’ajouter des commentaires dans le G-code sur les mouvements " +"d’impression de l’objet auquel ils appartiennent, ce qui est utile pour le " +"plug-in Octoprint CancelObject. Ce paramètre n’est PAS compatible avec la " +"configuration multi-matériaux avec un seul extrudeur et Essuyer dans " +"l’objet / Essuyer dans le remplissage." msgid "Exclude objects" -msgstr "Exclude objects" +msgstr "Exclure des objets" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" +"Activer cette option pour ajouter la commande EXCLUDE OBJECT dans le G-code." msgid "Verbose G-code" -msgstr "" +msgstr "G-code commenté" msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" +"Activez cette option pour obtenir un fichier G-code commenté, chaque ligne " +"étant expliquée par un texte descriptif. Si vous imprimez à partir d’une " +"carte SD, le poids supplémentaire du fichier pourrait ralentir le firmware." msgid "Infill combination" -msgstr "Infill combination" +msgstr "Combinaison de remplissage" msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"Automatically combine sparse infill of several layers to print together in " -"order to reduce time. Walls are still printed with original layer height." +"Combinez automatiquement le remplissage de plusieurs couches pour imprimer " +"ensemble afin de réduire le temps. La paroi est toujours imprimée avec la " +"hauteur de couche d'origine." + +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Combinaison de remplissage - Hauteur maximale de la couche" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Hauteur maximale de la couche pour le remplissage peu dense combiné.\n" +"\n" +"Réglez cette valeur à 0 ou 100% pour utiliser le diamètre de la buse (pour " +"une réduction maximale du temps d’impression) ou une valeur de ~80% pour " +"maximiser la force du remplissage peu dense.\n" +"\n" +"Le nombre de couches sur lesquelles le remplissage est combiné est obtenu en " +"divisant cette valeur par la hauteur de la couche et arrondi à la décimale " +"inférieure la plus proche.\n" +"\n" +"Utilisez des valeurs absolues en mm (par exemple, 0,32 mm pour une buse de " +"0,4 mm) ou des valeurs en % (par exemple, 80 %). Cette valeur ne doit pas " +"être supérieure au diamètre de la buse." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" msgid "Filament to print internal sparse infill." -msgstr "This is the filament for printing internal sparse infill." +msgstr "Filament pour imprimer un remplissage interne." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" +"Largeur de ligne du remplissage interne. Si elle est exprimée en %, elle " +"sera calculée sur le diamètre de la buse." msgid "Infill/Wall overlap" -msgstr "Infill/wall overlap" +msgstr "Chevauchement de remplissage/paroi" #, no-c-format, no-boost-format msgid "" @@ -11168,322 +14682,412 @@ msgid "" "value to ~10-15% to minimize potential over extrusion and accumulation of " "material resulting in rough top surfaces." msgstr "" +"La zone de remplissage est légèrement élargie pour chevaucher la paroi afin " +"d’améliorer l’adhérence. La valeur du pourcentage est relative à la largeur " +"de la ligne de remplissage. Réglez cette valeur à ~10-15% pour minimiser le " +"risque de sur-extrusion et d’accumulation de matériau, ce qui rendrait les " +"surfaces supérieures rugueuses." msgid "Top/Bottom solid infill/wall overlap" -msgstr "" +msgstr "Chevauchement du remplissage ou de la paroi supérieur(e)/inférieur(e)" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" +"La zone de remplissage solide supérieure est légèrement élargie pour " +"chevaucher la paroi afin d’améliorer l’adhérence et de minimiser " +"l’apparition de trous d’épingle à l’endroit où le remplissage supérieur " +"rencontre les parois. Une valeur de 25-30% est un bon point de départ, " +"minimisant l’apparition de trous d’épingle. La valeur en pourcentage est " +"relative à la largeur de ligne du remplissage" -msgid "Speed of internal sparse infill" -msgstr "This is the speed for internal sparse infill." +msgid "Speed of internal sparse infill." +msgstr "Vitesse de remplissage interne" + +msgid "Inherits profile" +msgstr "Hérite du profil" + +msgid "Name of parent profile." +msgstr "Nom du profil parent" msgid "Interface shells" -msgstr "Interface shells" +msgstr "Coque des interfaces" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"Forcer la génération de coques solides entre matériaux/volumes adjacents. " +"Utile pour les impressions multi-extrudeuses avec des matériaux translucides " +"ou un matériau de support soluble" msgid "Maximum width of a segmented region" -msgstr "Maximum width of a segmented region" +msgstr "Largeur maximale d’une région segmentée" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Maximum width of a segmented region. A value of 0 disables this feature." +"Largeur maximale d’une région segmentée. Zéro désactive cette fonction." msgid "Interlocking depth of a segmented region" -msgstr "Interlocking depth of a segmented region" +msgstr "Profondeur d’emboîtement d’une région segmentée" -msgid "Interlocking depth of a segmented region. Zero disables this feature." -msgstr "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." +msgstr "" +"Profondeur d’imbrication d’une région segmentée. Elle sera ignorée si " +"« mmu_segmented_region_max_width » est égal à zéro ou si " +"« mmu_segmented_region_interlocking_depth » est supérieur à " +"« mmu_segmented_region_max_width ». La valeur zéro désactive cette " +"fonctionnalité." msgid "Use beam interlocking" -msgstr "" +msgstr "Utiliser l’emboîtement des poutres" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Génère une structure de poutres imbriquées aux endroits où les différents " +"filaments se touchent. Cela améliore l’adhérence entre les filaments, en " +"particulier pour les modèles imprimés dans des matériaux différents." msgid "Interlocking beam width" -msgstr "" +msgstr "Largeur du faisceau d’emboîtement" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "La largeur des poutres de la structure d’emboîtement." msgid "Interlocking direction" -msgstr "" +msgstr "Sens d’emboîtement" msgid "Orientation of interlock beams." -msgstr "" +msgstr "Orientation des poutres de verrouillage." msgid "Interlocking beam layers" -msgstr "" +msgstr "Couches de poutres emboîtées" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"La hauteur des poutres de la structure d’emboîtement, mesurée en nombre de " +"couches. Moins il y a de couches, plus la structure est solide, mais plus " +"elle est sujette à des défauts." msgid "Interlocking depth" -msgstr "" +msgstr "Profondeur d’emboîtement" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"La distance de la limite entre les filaments pour générer une structure " +"imbriquée, mesurée en cellules. Un nombre insuffisant de cellules entraîne " +"une mauvaise adhérence." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Évitement des limites de l’imbrication" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"La distance à partir de l’extérieur d’un modèle où les structures imbriquées " +"ne seront pas générées, mesurée en cellules." msgid "Ironing Type" -msgstr "Ironing type" +msgstr "Type de lissage" msgid "" "Ironing is using small flow to print on same height of surface again to make " "flat surface more smooth. This setting controls which layer being ironed" msgstr "" -"Ironing uses a small flow to print at the same height of a surface to make " -"flat surfaces smoother. This setting controls which layers are being ironed." +"Le lissage utilise un petit débit pour imprimer à nouveau sur la même " +"hauteur de surface pour rendre la surface plane plus lisse. Ce paramètre " +"contrôle quelle couche est repassée" msgid "No ironing" -msgstr "No ironing" +msgstr "Pas de lissage" msgid "Top surfaces" -msgstr "All top surfaces" +msgstr "Surfaces supérieures" msgid "Topmost surface" -msgstr "Topmost surface only" +msgstr "Surface la plus élevée" msgid "All solid layer" -msgstr "All solid layers" +msgstr "Toutes les couches pleines" msgid "Ironing Pattern" -msgstr "Ironing Pattern" +msgstr "Modèle de lissage" -msgid "The pattern that will be used when ironing" -msgstr "" +msgid "The pattern that will be used when ironing." +msgstr "Motif qui sera utilisé lors du lissage" msgid "Ironing flow" -msgstr "Ironing flow" +msgstr "Débit de lissage" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" -"This is the amount of material to be extruded during ironing. It is relative " -"to the flow of normal layer height. Too high a value will result in " -"overextrusion on the surface." +"La quantité de matière à extruder lors du lissage. Relatif au débit de la " +"hauteur de couche normale. Une valeur trop élevée entraîne une surextrusion " +"en surface" msgid "Ironing line spacing" -msgstr "Ironing line spacing" +msgstr "Espacement des lignes de lissage" -msgid "The distance between the lines of ironing" -msgstr "This is the distance between the lines used for ironing." +msgid "The distance between the lines of ironing." +msgstr "La distance entre les lignes de lissage" -msgid "Ironing speed" -msgstr "Ironing speed" - -msgid "Print speed of ironing lines" -msgstr "This is the print speed for ironing lines." - -msgid "Ironing angle" -msgstr "" +msgid "Ironing inset" +msgstr "Encastrement du repassage" msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Distance à respecter par rapport aux bords. La valeur 0 correspond à la " +"moitié du diamètre de la buse" + +msgid "Ironing speed" +msgstr "Vitesse de lissage" + +msgid "Print speed of ironing lines." +msgstr "Vitesse d'impression des lignes de lissage." + +msgid "Ironing angle offset" msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" -msgstr "This G-code is inserted at every layer change after the z lift." +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "" +"Cette partie G-code est insérée à chaque changement de couche après le " +"levage du Z." + +msgid "Clumping detection G-code" +msgstr "" msgid "Supports silent mode" -msgstr "Silent Mode" +msgstr "Prend en charge le mode silencieux" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" -"Whether the machine supports silent mode in which machine uses lower " -"acceleration to print more quietly" +"Si la machine prend en charge le mode silencieux dans lequel la machine " +"utilise une accélération plus faible pour imprimer" msgid "Emit limits to G-code" -msgstr "" +msgstr "Emission des limites vers le G-code" msgid "Machine limits" -msgstr "Machine limits" +msgstr "Limites de la machine" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" +"Si cette option est activée, les limites de la machine seront émises dans un " +"fichier G-code.\n" +"Cette option sera ignorée si la version du G-code est définie sur Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" -msgstr "" "This G-code will be used as a code for the pause print. Users can insert " "pause G-code in the G-code viewer." +msgstr "" +"Ce G-code sera utilisé comme code pour la pause d'impression. Les " +"utilisateurs peuvent insérer un G-code de pause dans la visionneuse de G-" +"code." -msgid "This G-code will be used as a custom code" -msgstr "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." +msgstr "Ce G-code sera utilisé comme code personnalisé" msgid "Small area flow compensation (beta)" -msgstr "" +msgstr "Compensation du débit des petites zones (beta)" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" +"Activer la compensation des débits pour les petites zones de remplissage" msgid "Flow Compensation Model" -msgstr "" +msgstr "Modèle de compensation de débit" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" -msgstr "Maximum speed X" +msgstr "Vitesse maximale X" msgid "Maximum speed Y" -msgstr "Maximum speed Y" +msgstr "Vitesse maximale Y" msgid "Maximum speed Z" -msgstr "Maximum speed Z" +msgstr "Vitesse maximale Z" msgid "Maximum speed E" -msgstr "Maximum speed E" +msgstr "Vitesse maximale E" msgid "Maximum X speed" -msgstr "Maximum X speed" +msgstr "Vitesse en X maximale" msgid "Maximum Y speed" -msgstr "Maximum Y speed" +msgstr "Vitesse en Y maximale" msgid "Maximum Z speed" -msgstr "Maximum Z speed" +msgstr "Vitesse en Z maximale" msgid "Maximum E speed" -msgstr "Maximum E speed" +msgstr "Vitesse en E maximale" msgid "Maximum acceleration X" -msgstr "Maximum acceleration X" +msgstr "Accélérations maximum X" msgid "Maximum acceleration Y" -msgstr "Maximum acceleration Y" +msgstr "Accélérations maximum Y" msgid "Maximum acceleration Z" -msgstr "Maximum acceleration Z" +msgstr "Accélérations maximum Z" msgid "Maximum acceleration E" -msgstr "Maximum acceleration E" +msgstr "Accélérations maximum E" msgid "Maximum acceleration of the X axis" -msgstr "Maximum acceleration of the X axis" +msgstr "Accélération maximum de l'axe X" msgid "Maximum acceleration of the Y axis" -msgstr "Maximum acceleration of the Y axis" +msgstr "Accélération maximum de l'axe Y" msgid "Maximum acceleration of the Z axis" -msgstr "Maximum acceleration of the Z axis" +msgstr "Accélération maximum de l'axe Z" msgid "Maximum acceleration of the E axis" -msgstr "Maximum acceleration of the E axis" +msgstr "Accélération maximum de l'axe E" msgid "Maximum jerk X" -msgstr "Maximum jerk X" +msgstr "Jerk maximum en X" msgid "Maximum jerk Y" -msgstr "Maximum jerk Y" +msgstr "Jerk maximum en Y" msgid "Maximum jerk Z" -msgstr "Maximum jerk Z" +msgstr "Jerk maximum en Z" msgid "Maximum jerk E" -msgstr "Maximum jerk E" +msgstr "Jerk maximum en E" msgid "Maximum jerk of the X axis" -msgstr "Maximum jerk of the X axis" +msgstr "Jerk maximum de l'axe X" msgid "Maximum jerk of the Y axis" -msgstr "Maximum jerk of the Y axis" +msgstr "Jerk maximum de l'axe Y" msgid "Maximum jerk of the Z axis" -msgstr "Maximum jerk of the Z axis" +msgstr "Jerk maximum de l'axe Z" msgid "Maximum jerk of the E axis" -msgstr "Maximum jerk of the E axis" +msgstr "Jerk maximum de l'axe E" + +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" -msgstr "Minimum speed for extruding" +msgstr "Vitesse minimale d'extrusion" msgid "Minimum speed for extruding (M205 S)" -msgstr "Minimum speed for extruding (M205 S)" +msgstr "Vitesse minimale d'extrusion (M205 S)" msgid "Minimum travel speed" -msgstr "Minimum travel speed" +msgstr "Vitesse de déplacement minimale" msgid "Minimum travel speed (M205 T)" -msgstr "Minimum travel speed (M205 T)" +msgstr "Vitesse de déplacement minimale (M205 T)" msgid "Maximum acceleration for extruding" -msgstr "Maximum acceleration for extruding" +msgstr "Accélération maximale pour l'extrusion" msgid "Maximum acceleration for extruding (M204 P)" -msgstr "Maximum acceleration for extruding (M204 P)" +msgstr "Accélération maximale pour l'extrusion (M204 P)" msgid "Maximum acceleration for retracting" -msgstr "Maximum acceleration for retracting" +msgstr "Accélération maximale pour la rétraction" msgid "Maximum acceleration for retracting (M204 R)" -msgstr "Maximum acceleration for retracting (M204 R)" +msgstr "Accélération maximale pour la rétraction (M204 R)" msgid "Maximum acceleration for travel" -msgstr "Maximum acceleration for travel" +msgstr "Accélération maximale pour le déplacement" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" +"Accélération maximale de déplacement (M204 T), cela ne s’applique qu’à " +"Marlin 2" + +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Minimum" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Maximum" + +msgid "Maximum speed of resonance avoidance." msgstr "" msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" -"The part cooling fan speed may be increased when auto cooling is enabled. " -"This is the maximum speed for the part cooling fan." - -msgid "Max" -msgstr "Max" +"La vitesse du ventilateur de refroidissement des pièces peut être augmentée " +"lorsque le refroidissement automatique est activé. Il s'agit de la " +"limitation de vitesse maximale du ventilateur de refroidissement partiel" msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"The highest printable layer height for the extruder: this is used to limit " -"the maximum layer height when adaptive layer height is enabled." msgid "Extrusion rate smoothing" -msgstr "" +msgstr "Lissage du taux d’extrusion" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " @@ -11491,48 +15095,98 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" - -msgid "mm³/s²" -msgstr "" +"Ce paramètre atténue les changements soudains du taux d’extrusion qui se " +"produisent lorsque l’imprimante passe d’une impression à haut débit (vitesse " +"élevée / largeur de ligne plus grande) à une extrusion à débit plus faible " +"(vitesse plus faible / largeur de ligne plus petite) et vice versa.\n" +"\n" +"Il définit le taux maximum auquel le débit volumétrique extrudé en mm³/s " +"peut varier dans le temps. Des valeurs plus élevées signifient que des " +"changements du taux d’extrusion plus élevés sont autorisés, ce qui entraîne " +"des transitions de vitesse plus rapides.\n" +"\n" +"Une valeur de 0 désactive la fonctionnalité.\n" +"\n" +"Pour une imprimante direct drive à grande vitesse et à haut débit (comme " +"BambuLab ou Voron), cette valeur n’est généralement pas nécessaire. " +"Cependant, cela peut apporter un avantage marginal dans certains cas où les " +"vitesses varient considérablement. Par exemple, en cas de ralentissements " +"agressifs dus à des surplombs. Dans ces cas, une valeur élevée d’environ " +"300-350 mm³/s² est recommandée car elle permet un lissage juste suffisant " +"pour aider l’augmentation de la pression pour obtenir une transition de " +"débit plus douce.\n" +"\n" +"Pour les imprimantes plus lentes sans fonction de pressure advance, la " +"valeur doit être réglée beaucoup plus bas. Une valeur de 10-15 mm³/s² est un " +"bon point de départ en direct drive et de 5-10 mm³/s² en Bowden.\n" +"\n" +"Cette fonctionnalité est connue sous le nom de Pressure Equalizer dans Prusa " +"Slicer.\n" +"\n" +"Remarque : ce paramètre désactive la fonction Arc." msgid "Smoothing segment length" -msgstr "" +msgstr "Longueur du segment de lissage" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" +"Une valeur plus faible permet d’obtenir des transitions de taux d’extrusion " +"plus douces. Cependant, cela se traduit par un fichier gcode beaucoup plus " +"volumineux et plus d’instructions à traiter par l’imprimante.\n" +"\n" +"La valeur par défaut de 3 fonctionne bien dans la plupart des cas. Si votre " +"imprimante a des ratés, augmentez cette valeur pour réduire le nombre " +"d’ajustements effectués.\n" +"\n" +"Valeurs autorisées : 0.5-5" -msgid "Minimum speed for part cooling fan" -msgstr "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "Ne s’applique qu’aux parties extérieures" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Applique le lissage de la vitesse d’extrusion uniquement sur les périmètres " +"externes et les surplombs. Cela permet de réduire les artefacts dus à des " +"transitions de vitesse brutales sur les surplombs visibles de l’extérieur, " +"sans affecter la vitesse d’impression des éléments qui ne seront pas " +"visibles par l’utilisateur." + +msgid "Minimum speed for part cooling fan." +msgstr "Vitesse minimale du ventilateur de refroidissement des pièces" msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " @@ -11541,185 +15195,231 @@ msgid "" "Please enable auxiliary_fan in printer settings to use this feature. G-code " "command: M106 P2 S(0-255)" msgstr "" - -msgid "Min" -msgstr "Min" +"Vitesse du ventilateur de refroidissement auxiliaire. Le ventilateur " +"auxiliaire fonctionnera à cette vitesse pendant l'impression, à l'exception " +"des premières couches définies sans refroidissement.\n" +"Veuillez activer auxiliaire_fan dans les paramètres de l’imprimante pour " +"utiliser cette fonctionnalité. Commande G-code : M106 P2 S(0-255)" msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"The lowest printable layer height for the extruder. This is used to limit " -"the minimum layer height when adaptive layer height is enabled." msgid "Min print speed" -msgstr "Min print speed" +msgstr "Vitesse d'impression minimale" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" +"Vitesse d’impression minimale à laquelle l’imprimante ralentit pour " +"maintenir le temps de couche minimal défini ci-dessus lorsque le " +"ralentissement pour un meilleur refroidissement de la couche est activé." -msgid "Nozzle diameter" -msgstr "Nozzle diameter" - -msgid "Diameter of nozzle" -msgstr "The diameter of the nozzle" +msgid "The diameter of nozzle." +msgstr "Diamètre de la buse" msgid "Configuration notes" -msgstr "" +msgstr "Notes de la configuration" msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" +"Vous pouvez mettre ici vos notes personnelles. Ce texte sera ajouté aux " +"commentaires d’en-tête du G-code." msgid "Host Type" -msgstr "Host Type" +msgstr "Type d'hôte" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." msgstr "" -"Snapmaker Orca can upload G-code files to a printer host. This field must " -"contain the kind of the host." +"Snapmaker Orca peut téléverser des fichiers G-code sur une imprimante hôte. Ce " +"champ doit contenir le type d'hôte." msgid "Nozzle volume" -msgstr "Nozzle volume" +msgstr "Volume de la buse" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Volume of nozzle between the filament cutter and the end of the nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "" +"Volume de la buse entre le coupeur de filament et l'extrémité de la buse" msgid "Cooling tube position" -msgstr "" +msgstr "Position du tube de refroidissement" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" +"Distance entre le point central du tube de refroidissement et la pointe de " +"l’extrudeur." msgid "Cooling tube length" -msgstr "" +msgstr "Longueur du tube de refroidissement" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" +"Longueur du tube de refroidissement pour limiter l’espace à l’intérieur du " +"tube de refroidissement." msgid "High extruder current on filament swap" -msgstr "" +msgstr "Courant de l’extrudeur élevé lors du changement de filament" msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" +"Il peut être avantageux d’augmenter le courant du moteur de l’extrudeur " +"pendant la séquence d’échange de filament pour permettre des vitesses " +"d’alimentation rapides et pour surmonter la résistance lors du chargement " +"d’un filament." msgid "Filament parking position" -msgstr "" +msgstr "Position de stationnement du filament" msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" +"Distance entre la pointe de l’extrudeur et la position où le filament est " +"parqué une fois déchargé. Cela doit correspondre à la valeur du firmware de " +"l’imprimante." msgid "Extra loading distance" -msgstr "" +msgstr "Distance de chargement supplémentaire" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " -"than unloading." -msgstr "" -"When set to zero, the distance the filament is moved from parking position " -"during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." +msgstr "" +"Lorsqu’il est réglé sur zéro, la distance à laquelle le filament est déplacé " +"depuis la position de stationnement pendant le chargement est exactement la " +"même que celle à laquelle il a été déplacé pendant le déchargement. " +"Lorsqu’il est positif, il est chargé davantage, s’il est négatif, le " +"mouvement de chargement est plus court que le déchargement." msgid "Start end points" -msgstr "Start end points" +msgstr "Points de départ et d'arrivée" msgid "The start and end points which is from cutter area to garbage can." msgstr "" -"The start and end points which are from the cutter area to the excess chute." +"Les points de départ et d'arrivée qui se situent entre la zone de coupe et " +"la goulotte d'évacuation." msgid "Reduce infill retraction" -msgstr "Reduce infill retraction" +msgstr "Réduire la rétraction du remplissage" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" -"Don't retract when the travel is entirely in an infill area. That means the " -"oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generation slower." +"Ne pas effectuer de rétraction lors de déplacement en zone de remplissage " +"car même si l’extrudeur suinte, les coulures ne seraient pas visibles. Cela " +"peut réduire les rétractions pour les modèles complexes et économiser du " +"temps d’impression, mais ralentit la découpe et la génération du G-code" + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Cette option permet d’abaisser la température des extrudeurs inactifs afin " +"d’éviter le suintement." msgid "Filename format" -msgstr "Filename format" +msgstr "Format du nom de fichier" -msgid "User can self-define the project file name when export" -msgstr "Users can decide project file names when exporting." +msgid "Users can define the project file name when exporting." +msgstr "" +"L'utilisateur peut définir lui-même le nom du fichier de projet lors de " +"l'exportation" msgid "Make overhangs printable" -msgstr "" +msgstr "Rendre les surplombs imprimables" msgid "Modify the geometry to print overhangs without support material." -msgstr "" +msgstr "Modifier la géométrie pour imprimer les surplombs sans support." msgid "Make overhangs printable - Maximum angle" -msgstr "" +msgstr "Rendre les surplombs imprimables - Angle maximal" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" +"Angle maximal des surplombs à autoriser après avoir rendu imprimables les " +"surplombs plus raides. Une valeur de 90° ne changera pas du tout le modèle " +"et n’autorisera aucun surplomb, tandis que 0 remplacera tous les surplombs " +"par un matériau conique." msgid "Make overhangs printable - Hole area" -msgstr "" +msgstr "Rendre les surplombs imprimables - Zone de trous" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" - -msgid "mm²" -msgstr "mm²" +"Aire maximale d’un trou dans la base du modèle avant qu’il ne soit rempli " +"par un matériau conique. Une valeur de 0 remplira tous les trous dans la " +"base du modèle." msgid "Detect overhang wall" -msgstr "Detect overhang walls" +msgstr "Détecter une paroi en surplomb" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"This detects the overhang percentage relative to line width and uses a " -"different speed to print. For 100%% overhang, bridging speed is used." +"Détectez le pourcentage de surplomb par rapport à la largeur de la ligne et " +"utilisez une vitesse différente pour imprimer. Pour un surplomb de 100%% la " +"vitesse du pont est utilisée." + +msgid "Filament to print walls." +msgstr "Filament pour imprimer les parois" msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" +"Largeur de ligne de la paroi intérieure. Si elle est exprimée en %, elle " +"sera calculée sur le diamètre de la buse." -msgid "Speed of inner wall" -msgstr "This is the speed for inner walls." +msgid "Speed of inner wall." +msgstr "Vitesse de la paroi intérieure" -msgid "Number of walls of every layer" -msgstr "This is the number of walls per layer." +msgid "Number of walls of every layer." +msgstr "Nombre de parois de chaque couche" msgid "Alternate extra wall" -msgstr "" +msgstr "Paroi supplémentaire alternée" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" +"Ce paramètre ajoute une paroi supplémentaire à chaque couche. De cette " +"manière, le remplissage est coincé verticalement entre les parois, ce qui " +"permet d’obtenir des impressions plus solides.\n" +"\n" +"Lorsque cette option est activée, l’option « assurer l’épaisseur verticale " +"de la coque » doit être désactivée.\n" +"\n" +"Il n’est pas recommandé d’utiliser le remplissage par éclairs avec cette " +"option, car il y a peu de remplissage pour ancrer les périmètres " +"supplémentaires." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -11728,278 +15428,335 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" +"Si vous souhaitez traiter le G-code de sortie via des scripts personnalisés, " +"indiquez simplement leurs chemins absolus ici. Séparez plusieurs scripts par " +"un point-virgule. Les scripts recevront le chemin absolu vers le fichier G-" +"code comme premier argument, et ils peuvent accéder aux paramètres de " +"configuration Snapmaker Orca en lisant les variables d’environnement." + +msgid "Printer type" +msgstr "Type d’imprimante" + +msgid "Type of the printer." +msgstr "Type de l’imprimante" msgid "Printer notes" -msgstr "Printer notes" +msgstr "Notes de l’mprimante" msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." +msgstr "Vous pouvez mettre vos notes concernant l’imprimante ici." + +msgid "Printer variant" +msgstr "Variante de l’imprimante" msgid "Raft contact Z distance" -msgstr "Raft contact Z distance" +msgstr "Distance Z de contact du radeau" -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "" -"This is the Z gap between an object and a raft. It is ignored for soluble " -"interfaces." +msgid "Z gap between object and raft. Ignored for soluble interface." +msgstr "Écart en Z entre l'objet et le radeau. Ignoré pour l'interface soluble" msgid "Raft expansion" -msgstr "Raft expansion" +msgstr "Agrandissement du radeau" -msgid "Expand all raft layers in XY plane" -msgstr "This expands all raft layers in XY plane." +msgid "Expand all raft layers in XY plane." +msgstr "Développer toutes les couches de radeau dans le plan XY" msgid "Initial layer density" -msgstr "First layer density" +msgstr "Densité de couche initiale" -msgid "Density of the first raft or support layer" -msgstr "This is the density of the first raft or support layer." +msgid "Density of the first raft or support layer." +msgstr "Densité du premier radeau ou couche de support" msgid "Initial layer expansion" -msgstr "First layer expansion" +msgstr "Extension de la couche initiale" -msgid "Expand the first raft or support layer to improve bed plate adhesion" -msgstr "This expands the first raft or support layer to improve bed adhesion." +msgid "Expand the first raft or support layer to improve bed plate adhesion." +msgstr "" +"Développez le premier radeau ou couche de support pour améliorer l'adhérence " +"du plateau" msgid "Raft layers" -msgstr "Raft layers" +msgstr "Couches du radeau" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" -msgstr "" -"Object will be raised by this number of support layers. Use this function to " "avoid warping when printing ABS." +msgstr "" +"L'objet sera élevé par ce nombre de couches de support. Utilisez cette " +"fonction pour éviter l'emballage lors de l'impression ABS" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" -msgstr "" "The G-code path is generated after simplifying the contour of models to " -"avoid too many points and G-code lines. Smaller values mean higher " -"resolution and more time required to slice." +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." +msgstr "" +"Le chemin du G-code est généré après avoir simplifié le contour du modèle " +"pour éviter trop de points et de lignes G-code dans le fichier G-code. Une " +"valeur plus petite signifie une résolution plus élevée et plus de temps pour " +"découper." msgid "Travel distance threshold" -msgstr "Travel distance threshold" +msgstr "Seuil de distance parcourue" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" -msgstr "" -"Only trigger retraction when the travel distance is longer than this " "threshold." +msgstr "" +"Ne déclencher la rétraction que lorsque la distance parcourue est supérieure " +"à ce seuil" msgid "Retract amount before wipe" -msgstr "Retract amount before wipe" +msgstr "Quantité de rétraction avant essuyage" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"This is the length of fast retraction before a wipe, relative to retraction " -"length." +"La longueur de la rétraction rapide avant l’essuyage, par rapport à la " +"longueur de la rétraction" msgid "Retract when change layer" -msgstr "Retract on layer change" +msgstr "Rétracter lors de changement de couche" -msgid "Force a retraction when changes layer" -msgstr "This forces a retraction on layer changes." +msgid "Force a retraction when changes layer." +msgstr "Cela force une rétraction sur les changements de couche" msgid "Retraction Length" -msgstr "Retraction Length" +msgstr "Longueur de Rétraction" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"This is the amount of filament in the extruder that is pulled back to avoid " -"oozing during long travel distances. Set to 0 to disable retraction." -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Longue rétraction lors de la coupe (expérimental)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." +"Fonction expérimentale : rétracter et couper le filament à une plus grande " +"distance pendant les changements pour minimiser la purge. Bien que cela " +"réduise considérablement la purge, cela peut également augmenter le risque " +"de bouchage des buses ou d’autres problèmes d’impression." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "Distance de rétraction lors de la coupe" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" +"Fonction expérimentale : longueur de rétraction avant la coupure lors du " +"changement de filament" -msgid "Z hop when retract" -msgstr "Z hop when retracting" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Hauteur du saut en Z" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Whenever there is a retraction, the nozzle is lifted a little to create " -"clearance between the nozzle and the print. This prevents the nozzle from " -"hitting the print when traveling more. Using spiral lines to lift z can " -"prevent stringing." +"Chaque fois que la rétraction est effectuée, la buse est légèrement soulevée " +"pour créer un espace entre la buse et l'impression. Il empêche la buse de " +"toucher l'impression lors du déplacement. L'utilisation d'une ligne en " +"spirale pour soulever z peut empêcher l'enfilage" -msgid "Z hop lower boundary" -msgstr "Z hop lower boundary" +msgid "Z-hop lower boundary" +msgstr "Limite inférieure du saut de Z" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Le saut de Z ne sera effectif que si Z est supérieur à cette valeur et " +"inférieur au paramètre : « Limite supérieure du saut de Z »." -msgid "Z hop upper boundary" -msgstr "Z hop upper boundary" +msgid "Z-hop upper boundary" +msgstr "Limite supérieure du saut de Z" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"Si cette valeur est positive, le saut de Z ne sera effectif que si Z est " +"supérieur au paramètre : « Limite inférieure de Z hop » et qu’il est " +"inférieur à cette valeur." -msgid "Z hop type" +msgid "Z-hop type" +msgstr "Type de saut en Z" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" -msgstr "Slope" +msgstr "Pente" msgid "Spiral" -msgstr "Spiral" +msgstr "Spirale" msgid "Traveling angle" -msgstr "" +msgstr "Angle de déplacement" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Angle de déplacement pour les sauts en Z en pente et en spirale. En le " +"réglant sur 90°, on obtient une levée normale." msgid "Only lift Z above" -msgstr "" +msgstr "Décalage en Z au-dessus uniquement" msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z." msgstr "" +"Si définie sur une valeur positive, l’élévation Z n’aura lieu qu’au-dessus " +"du Z absolu spécifié." msgid "Only lift Z below" -msgstr "" +msgstr "Décalage en Z en dessous uniquement" msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z." msgstr "" +"Si définie sur une valeur positive, l’élévation Z n’aura lieu qu’en dessous " +"du Z absolu spécifié." msgid "On surfaces" -msgstr "" +msgstr "Sur les surfaces" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" +"Appliquer le comportement du décalage en Z. Ce paramètre est impacté par les " +"paramètres ci-dessus (décalage en Z au-dessus/en dessous uniquement)." msgid "All Surfaces" -msgstr "" +msgstr "Toutes les surfaces" msgid "Top Only" -msgstr "" +msgstr "Supérieures" msgid "Bottom Only" -msgstr "" +msgstr "Inférieures" msgid "Top and Bottom" +msgstr "Supérieures et Inférieures" + +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." msgstr "" msgid "Extra length on restart" -msgstr "Extra length on restart" +msgstr "Longueur supplémentaire" msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" +"Lorsque la rétraction est compensée après le mouvement de déplacement, " +"l’extrudeuse poussera cette quantité supplémentaire de filament. Ce " +"paramètre est rarement nécessaire." msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" +"Lorsque la rétraction est compensée après le changement d’outil, l’extrudeur " +"poussera cette quantité supplémentaire de filament." msgid "Retraction Speed" -msgstr "Retraction speed" +msgstr "Vitesse de Rétraction" -msgid "Speed of retractions" -msgstr "This is the speed for retraction." +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" -msgstr "Deretraction speed" +msgid "De-retraction Speed" +msgstr "Vitesse de réinsertion" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"The speed for reloading filament into the extruder after a retraction; " -"setting this to 0 means that it will be the same speed as the retraction." msgid "Use firmware retraction" -msgstr "Use firmware retraction" +msgstr "Utiliser la rétraction firmware" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" +"Ce paramètre expérimental utilise les commandes G10 et G11 pour que le " +"firmware gère la rétraction. Ceci n’est pris en charge que dans une version " +"de Marlin récente." msgid "Show auto-calibration marks" -msgstr "" +msgstr "Afficher les marques de calibration" msgid "Disable set remaining print time" -msgstr "" +msgstr "Désactiver le réglage du temps d’impression restant" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" +"Désactiver la génération du M73 : Définir le temps d’impression restant dans " +"le gcode final." msgid "Seam position" -msgstr "Seam position" +msgstr "Position de la couture" -msgid "The start position to print each part of outer wall" -msgstr "This is the starting position for each part of the outer wall." +msgid "The start position to print each part of outer wall." +msgstr "" +"La position de départ pour imprimer chaque partie de la paroi extérieure" msgid "Nearest" -msgstr "Nearest" +msgstr "La plus proche" msgid "Aligned" -msgstr "Aligned" +msgstr "Alignée" + +msgid "Aligned back" +msgstr "" msgid "Back" -msgstr "Back" +msgstr "Arrière" msgid "Random" -msgstr "Random" +msgstr "Aléatoire" msgid "Staggered inner seams" -msgstr "" +msgstr "Coutures intérieures décalées" msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" +"Cette option entraîne le décalage des coutures intérieures vers l’arrière en " +"fonction de leur profondeur, formant un motif en zigzag." msgid "Seam gap" -msgstr "Seam gap" +msgstr "Écart de couture" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -12007,26 +15764,32 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current extruder diameter. The default value for this parameter is 10%." msgstr "" +"Afin de réduire la visibilité de la couture dans une extrusion en boucle " +"fermée, la boucle est interrompue et raccourcie d’une valeur spécifiée.\n" +"Cette quantité peut être spécifiée en millimètres ou en pourcentage du " +"diamètre actuel de la buse. La valeur par défaut de ce paramètre est 10%." msgid "Scarf joint seam (beta)" -msgstr "" +msgstr "Couture en biseau (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use scarf joint to minimize seam visibility and increase seam strength." +"Utiliser une couture en biseau pour minimiser la visibilité de la couture et " +"augmenter sa solidité." msgid "Conditional scarf joint" -msgstr "Conditional scarf joint" +msgstr "Couture en biseau conditionnelle" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Apply scarf joints only to smooth perimeters where traditional seams do not " -"conceal the seams at sharp corners effectively." +"N’appliquer les couture en biseau que sur les périmètres lisses, lorsque les " +"coutures traditionnelles ne permettent pas de dissimuler efficacement les " +"coutures dans les angles saillants." msgid "Conditional angle threshold" -msgstr "Conditional angle threshold" +msgstr "Seuil d’angle conditionnel" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12035,9 +15798,14 @@ msgid "" "(indicating the absence of sharp corners), a scarf joint seam will be used. " "The default value is 155°." msgstr "" +"Cette option définit l’angle seuil pour l’application d’une couture en " +"biseau conditionnelle.\n" +"Si l’angle maximal à l’intérieur de la boucle périmétrique dépasse cette " +"valeur (indiquant l’absence d’angles vifs), une couture en biseau sera " +"utilisée. La valeur par défaut est de 155°." msgid "Conditional overhang threshold" -msgstr "" +msgstr "Seuil de dépassement conditionnel" #, no-c-format, no-boost-format msgid "" @@ -12047,228 +15815,355 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" +"Cette option détermine le seuil de surplomb pour l’application des coutures " +"en écharpe. Si la partie non soutenue du périmètre est inférieure à ce " +"seuil, des coutures en biseau seront appliquées. Le seuil par défaut est " +"fixé à 40 % de la largeur de la paroi extérieure. Pour des raisons de " +"performance, le degré de surplomb est estimé." msgid "Scarf joint speed" -msgstr "" +msgstr "Vitesse de la couture en biseau" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" +"Cette option définit la vitesse d’impression des coutures en biseau. Il est " +"recommandé d’imprimer les coutures en biseau à une vitesse lente (moins de " +"100 mm/s). Il est également conseillé d’activer l’option « Lissage de la " +"vitesse d’extrusion » si la vitesse définie varie de manière significative " +"par rapport à la vitesse des parois extérieures ou intérieures. Si la " +"vitesse spécifiée ici est supérieure à la vitesse des parois extérieures ou " +"intérieures, l’imprimante prendra par défaut la plus lente des deux " +"vitesses. Lorsqu’elle est spécifiée sous forme de pourcentage (par exemple, " +"80 %), la vitesse est calculée sur la base de la vitesse de la paroi " +"extérieure ou intérieure. La valeur par défaut est fixée à 100 %." msgid "Scarf joint flow ratio" -msgstr "" +msgstr "Ratio de débit de la couture en biseau" msgid "This factor affects the amount of material for scarf joints." msgstr "" +"Ce facteur influe sur la quantité de matériau pour les coutures en biseau." msgid "Scarf start height" -msgstr "Scarf start height" +msgstr "Hauteur de départ du biseau" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." +"Hauteur de départ du biseau.\n" +"Cette hauteur peut être spécifiée en millimètres ou en pourcentage de la " +"hauteur de la couche actuelle. La valeur par défaut de ce paramètre est 0." msgid "Scarf around entire wall" -msgstr "Scarf around entire wall" +msgstr "Biseau sur toute la paroi" msgid "The scarf extends to the entire length of the wall." -msgstr "The scarf extends to the entire length of the wall." +msgstr "Le biseau s’étend sur toute la longueur de la paroi." msgid "Scarf length" -msgstr "Scarf length" +msgstr "Longueur du biseau" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." +"Longueur du biseau. La mise à zéro de ce paramètre désactive automatiquement " +"le biseau." msgid "Scarf steps" -msgstr "Scarf steps" +msgstr "Étapes du biseau" msgid "Minimum number of segments of each scarf." -msgstr "Minimum number of segments of each scarf." +msgstr "Nombre minimum de segments de chaque biseau." msgid "Scarf joint for inner walls" -msgstr "Scarf joint for inner walls" +msgstr "Joint en biseau pour les parois internes" msgid "Use scarf joint for inner walls as well." -msgstr "Use scarf joint for inner walls as well." +msgstr "Utiliser également un joint en biseau pour les parois intérieures." msgid "Role base wipe speed" -msgstr "" +msgstr "Vitesse d’essuyage basée sur la vitesse d’extrusion" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" +"La vitesse d’essuyage est identique à la vitesse d’extrusion actuelle. Par " +"exemple, si l’action d’essuyage est suivie d’une extrusion de paroi " +"extérieure, la vitesse de la paroi extérieure sera utilisée pour cette " +"action d’essuyage." msgid "Wipe on loops" -msgstr "" +msgstr "Essuyer sur les boucles" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " "inward movement is executed before the extruder leaves the loop." msgstr "" +"Pour minimiser la visibilité de la couture dans une extrusion en boucle " +"fermée, un petit mouvement vers l’intérieur est exécuté avant que la buse ne " +"quitte la boucle." msgid "Wipe before external loop" -msgstr "" +msgstr "Essuyer avant la boucle externe" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" +"Pour minimiser la visibilité d’une éventuelle surextrusion au début d’un " +"périmètre extérieur lors de l’impression avec l’ordre d’impression de paroi " +"extérieure/intérieure ou intérieure/extérieure/intérieure, la dérétraction " +"est effectuée légèrement sur l’intérieur à partir du début du périmètre " +"extérieur. De cette manière, toute sur-extrusion potentielle est cachée de " +"la surface extérieure.\n" +"\n" +"Ceci est utile lors de l’impression avec l’ordre d’impression de la paroi " +"extérieure/intérieure ou intérieure/extérieure/intérieure, car dans ces " +"modes, il est plus probable qu’un périmètre extérieur soit imprimé " +"immédiatement après un mouvement de dérétraction." msgid "Wipe speed" -msgstr "Wipe speed" +msgstr "Vitesse d’essuyage" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"La vitesse d’essuyage est déterminée par le paramètre de vitesse spécifié " +"dans cette configuration. Si la valeur est exprimée en pourcentage (par " +"exemple 80%), elle sera calculée en fonction du paramètre de vitesse de " +"déplacement ci-dessus. La valeur par défaut de ce paramètre est 80%" msgid "Skirt distance" -msgstr "Skirt distance" +msgstr "Distance de la jupe" -msgid "Distance from skirt to brim or object" -msgstr "This is the distance from the skirt to the brim or the object." +msgid "The distance from the skirt to the brim or the object." +msgstr "Distance de la jupe au bord ou à l'objet" + +msgid "Skirt start point" +msgstr "Point de départ de la jupe" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Angle entre le centre de l’objet et le point de départ de la jupe. Le zéro " +"est la position la plus à droite, le sens inverse des aiguilles d’une montre " +"est un angle positif." msgid "Skirt height" -msgstr "Skirt height" +msgstr "Hauteur de la jupe" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Number of skirt layers: usually only one" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Nombre de couches de jupe, généralement une seule" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" -msgstr "" +msgstr "Paravent" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" - -msgid "Limited" -msgstr "" +"Un paravent est utile pour protéger une impression ABS ou ASA contre la " +"déformation et le détachement du plateau d’impression en raison des courants " +"d’air. Il n’est généralement nécessaire que pour les imprimantes à structure " +"ouverte, c’est-à-dire sans boîtier.\n" +"\n" +"Activé = la hauteur de la jupe est égale à celle de l’objet imprimé le plus " +"haut. Sinon, c’est la « hauteur de la jupe » qui est utilisée.\n" +"Remarque : lorsque le paravent est actif, la jupe est imprimée à la distance " +"de la jupe par rapport à l’objet. Par conséquent, si des bordures sont " +"actives, elle peut les croiser. Pour éviter cela, augmentez la valeur de la " +"distance de la jupe.\n" msgid "Enabled" +msgstr "Activé" + +msgid "Skirt type" +msgstr "Type de jupe" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." msgstr "" +"Combiné - une seule jupe pour tous les objets, Par objet - une jupe pour " +"chaque objet." + +msgid "Per object" +msgstr "Par objet" msgid "Skirt loops" -msgstr "Skirt loops" +msgstr "Boucles de la jupe" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "" -"This is the number of loops for the skirt. 0 means the skirt is disabled." +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Nombre de boucles pour la jupe. Zéro signifie désactiver la jupe" msgid "Skirt speed" -msgstr "" +msgstr "Vitesse de la jupe" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "" +"Vitesse de la jupe, en mm/s. Une valeur à 0 signifie que la vitesse " +"d’extrusion par défaut est utilisée." msgid "Skirt minimum extrusion length" -msgstr "" +msgstr "Longueur minimale d’extrusion de la jupe" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" +"Longueur minimale d’extrusion du filament en mm lors de l’impression de la " +"jupe. Zéro signifie que cette fonction est désactivée.\n" +"\n" +"L’utilisation d’une valeur non nulle est utile si l’imprimante est " +"configurée pour imprimer sans ligne d’amorce.\n" +"Le nombre final de boucles n’est pas pris en compte lors de la disposition " +"ou de la validation de la distance des objets. Dans ce cas, augmenter le " +"nombre de boucles." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" -msgstr "" "The printing speed in exported G-code will be slowed down when the estimated " "layer time is shorter than this value in order to get better cooling for " "these layers." +msgstr "" +"La vitesse d'impression dans le G-code exporté sera ralentie, lorsque le " +"temps de couche estimé est plus court que cette valeur, pour obtenir un " +"meilleur refroidissement pour ces couches." msgid "Minimum sparse infill threshold" -msgstr "Minimum sparse infill threshold" +msgstr "Seuil minimum de remplissage" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"Sparse infill areas which are smaller than this threshold value are replaced " -"by internal solid infill." +"La zone de remplissage inférieure à la valeur seuil est remplacée par un " +"remplissage plein interne" + +msgid "Solid infill" +msgstr "Remplissage solide" + +msgid "Filament to print solid infill." +msgstr "Filament pour l’impression de remplissage solide" msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" +"Largeur de ligne du remplissage plein interne. Si elle est exprimée en %, " +"elle sera calculée sur le diamètre de la buse." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" -"This is the speed for internal solid infill, not including the top or bottom " -"surface." +"Vitesse du remplissage plein interne, pas de la surface supérieure et " +"inférieure" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"This enables spiraling, which smooths out the Z moves of the outer contour " -"and turns a solid model into a single walled print with solid bottom layers. " -"The final generated model has no seam." +"Spiralize lisse les mouvements z du contour extérieur. Et transforme un " +"modèle plein en une impression à paroi unique avec des couches inférieures " +"solides. Le modèle généré final n'a pas de couture" msgid "Smooth Spiral" -msgstr "Smooth Spiral" +msgstr "Spirale lisse" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"« Spirale lisse » lisse également les mouvements X et Y, de sorte qu’aucune " +"couture n’est visible, même dans les directions XY sur des parois qui ne " +"sont pas verticales" msgid "Max XY Smoothing" -msgstr "Max XY Smoothing" +msgstr "Lissage Max XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" -msgstr "" "Maximum distance to move points in XY to try to achieve a smooth spiral. If " -"expressed as a %, it will be computed over nozzle diameter" +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" +"Distance maximale pour déplacer les points dans l’axe XY afin d’obtenir une " +"spirale lisse. Si elle est exprimée en %, elle sera calculée par rapport au " +"diamètre de la buse" + +msgid "Spiral starting flow ratio" +msgstr "Rapport de débit de départ de la spirale" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Définit le rapport de débit de départ lors de la transition de la dernière " +"couche inférieure à la spirale. Normalement, la transition en spirale fait " +"passer le rapport de débit de 0% à 100% au cours de la première boucle, ce " +"qui peut dans certains cas entraîner une sous-extrusion au début de la " +"spirale." + +msgid "Spiral finishing flow ratio" +msgstr "Taux de débit de la finition en spirale" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Définit le ratio de débit de finition lors de la fin de la spirale. " +"Normalement, la transition de la spirale fait passer le taux de débit de " +"100% à 0% au cours de la dernière boucle, ce qui peut dans certains cas " +"entraîner une sous-extrusion à la fin de la spirale." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12280,38 +16175,74 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"If smooth or traditional mode is selected, a timelapse video will be " -"generated for each print. After each layer is printed, a snapshot is taken " -"with the chamber camera. All of these snapshots are composed into a " -"timelapse video when printing completes. If smooth mode is selected, the " -"toolhead will move to the excess chute after each layer is printed and then " -"take a snapshot. Since the melt filament may leak from the nozzle during the " -"process of taking a snapshot, a prime tower is required for smooth mode to " -"wipe the nozzle." +"Si le mode fluide ou traditionnel est sélectionné, une vidéo en timelapse " +"sera générée pour chaque impression. À chaque couche imprimée, un instantané " +"est pris avec la caméra intégrée. Tous ces instantanés seront assemblés dans " +"une vidéo timelapse une fois l'impression terminée. Si le mode lisse est " +"sélectionné, l'extrudeur se déplace vers la goulotte d'évacuation à chaque " +"couche imprimée, puis prend un cliché. Étant donné que le filament fondu " +"peut s'échapper de la buse pendant la prise de vue, une tour d’amorçage est " +"requise en mode lisse pour essuyer la buse." msgid "Traditional" -msgstr "Traditional" +msgstr "Traditionnel" msgid "Temperature variation" -msgstr "Temperature variation" +msgstr "Variation de température" + +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Différence de température à appliquer lorsqu’un extrudeur n’est pas actif. " +"La valeur n’est pas utilisée lorsque ‘idle_temperature’ dans les paramètres " +"du filament est réglé sur une valeur non nulle." + +msgid "Preheat time" +msgstr "Durée du préchauffage" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Pour réduire le temps d’attente après un changement d’outil, Orca peut " +"préchauffer l’outil suivant pendant que l’outil actuel est encore en cours " +"d’utilisation. Ce paramètre spécifie le temps en secondes pour préchauffer " +"l’outil suivant. Orca insère une commande M104 pour préchauffer l’outil à " +"l’avance." + +msgid "Preheat steps" +msgstr "Étapes de préchauffage" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Insérer plusieurs commandes de préchauffage (par exemple M104.1). Uniquement " +"utile pour la Prusa XL. Pour les autres imprimantes, veuillez le régler sur " +"1." msgid "Start G-code" -msgstr "Start G-code" +msgstr "G-code de démarrage" -msgid "Start G-code when start the whole printing" -msgstr "G-code added when starting a print" +msgid "Start G-code when starting the entire print." +msgstr "G-code de démarrage lors du démarrage de l'ensemble de l'impression" -msgid "Start G-code when start the printing of this filament" -msgstr "G-code added when the printer starts using this filament" +msgid "Start G-code when starting the printing of this filament." +msgstr "G-code de démarrage au démarrage de l'impression de ce filament" msgid "Single Extruder Multi Material" -msgstr "" +msgstr "Multi-matériaux pour extrudeur unique" -msgid "Use single nozzle to print multi filament" -msgstr "" +msgid "Use single nozzle to print multi filament." +msgstr "Utiliser une seule buse pour imprimer plusieurs filaments" msgid "Manual Filament Change" -msgstr "" +msgstr "Changement manuel du filament" msgid "" "Enable this option to omit the custom Change filament G-code only at the " @@ -12320,71 +16251,80 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" +"Activez cette option pour omettre le G-code de changement de filament " +"personnalisé uniquement au début de l’impression. La commande de changement " +"d’outil (par exemple, T0) sera ignorée tout au long de l’impression. Ceci " +"est utile pour l’impression manuelle multi-matériaux, où nous utilisons M600/" +"PAUSE pour déclencher l’action de changement manuel de filament." msgid "Purge in prime tower" -msgstr "" +msgstr "Purge dans la tour d’amorçage" -msgid "Purge remaining filament into prime tower" -msgstr "" +msgid "Purge remaining filament into prime tower." +msgstr "Purger le filament restant dans la tour d’amorçage" msgid "Enable filament ramming" msgstr "" msgid "No sparse layers (beta)" -msgstr "" +msgstr "Pas de couches éparses (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " -"print the wipe tower. User is responsible for ensuring there is no collision " -"with the print." -msgstr "" "If enabled, the wipe tower will not be printed on layers with no tool " "changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." +msgstr "" +"Si cette option est activée, la tour d’essuyage ne sera pas imprimée sur les " +"couches sans changement d’outil. Sur les couches avec changement d’outil, " +"l’extrudeur se déplacera vers le bas pour imprimer la tour d’essuyage. " +"L’utilisateur est responsable de s’assurer qu’il n’y a pas de collision avec " +"l’impression." msgid "Prime all printing extruders" -msgstr "" +msgstr "Amorcer tous les extrudeurs d’impression" msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" +"Si cette option est activée, tous les extrudeurs d’impression seront amorcés " +"sur le bord avant du plateau au début de l’impression." msgid "Slice gap closing radius" -msgstr "Slice gap closing radius" +msgstr "Rayon de fermeture de l’écart des tranches" msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." +"Les fissures plus petites que 2x le rayon de fermeture de l’espace sont " +"remplies pendant la découpe du maillage. L’opération de fermeture de " +"l’espace peut réduire la résolution finale de l’impression, il est donc " +"conseillé de maintenir cette valeur à un niveau raisonnablement bas." msgid "Slicing Mode" -msgstr "Slicing Mode" +msgstr "Mode de découpe" msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " -"close all holes in the model." +"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « " +"Fermer les trous » pour fermer tous les trous du modèle." msgid "Regular" -msgstr "Regular" +msgstr "Standard" msgid "Even-odd" -msgstr "Even-odd" +msgstr "Pair-impair" msgid "Close holes" -msgstr "Close holes" +msgstr "Combler les trous" msgid "Z offset" -msgstr "" +msgstr "Décalage Z" msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -12392,195 +16332,215 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" +"Cette valeur sera ajoutée (ou soustraite) de toutes les coordonnées Z dans " +"le G-code de sortie. Il est utilisé pour compenser une mauvaise position de " +"la butée Z : par exemple, si votre zéro de butée laisse réellement la buse à " +"0,3 mm du plateau, réglez-le sur -0,3 (ou corrigez votre butée)." msgid "Enable support" -msgstr "Enable support" +msgstr "Activer les supports" msgid "Enable support generation." -msgstr "This enables support generation." +msgstr "Activer la génération de support." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"Normal(auto) and Tree(auto) are used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Les options Normal (auto) et Arbre (auto) sont utilisées pour générer " +"automatiquement des supports. Si l’option Normal (manuel) ou Arbre (manuel) " +"est sélectionnée, seuls les forceurs de supports sont générés" -msgid "normal(auto)" -msgstr "Normal(auto)" +msgid "Normal (auto)" +msgstr "Normal (auto)" -msgid "tree(auto)" -msgstr "Tree(auto)" +msgid "Tree (auto)" +msgstr "Arbre (auto)" -msgid "normal(manual)" -msgstr "Normal(manual)" +msgid "Normal (manual)" +msgstr "Normal (manuel)" -msgid "tree(manual)" -msgstr "Tree(manual)" +msgid "Tree (manual)" +msgstr "Arbre (manuel)" -msgid "Support/object xy distance" -msgstr "Support/object xy distance" +msgid "Support/object XY distance" +msgstr "Distance support/objet xy" -msgid "XY separation between an object and its support" -msgstr "This controls the XY separation between an object and its support." +msgid "XY separation between an object and its support." +msgstr "Séparation XY entre un objet et ses supports" + +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" msgid "Pattern angle" -msgstr "Pattern angle" +msgstr "Angle du motif" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "" -"Use this setting to rotate the support pattern on the horizontal plane." +"Utilisez ce paramètre pour faire pivoter le motif de support sur le plan " +"horizontal." msgid "On build plate only" -msgstr "On build plate only" +msgstr "Sur plateau uniquement" -msgid "Don't create support on model surface, only on build plate" -msgstr "This setting only generates supports that begin on the build plate." +msgid "Don't create support on model surface, only on build plate." +msgstr "" +"Ce paramètre génère uniquement les supports qui commencent sur le plateau" msgid "Support critical regions only" -msgstr "Support critical regions only" +msgstr "Ne supporter que les régions critiques" msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Only create support for critical regions including sharp tail, cantilever, " -"etc." +"Créez un support uniquement pour les zones critiques notamment les pointes, " +"les surplombs, etc." -msgid "Remove small overhangs" -msgstr "Remove small overhangs" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" -msgstr "Top Z distance" +msgstr "Distance Z supérieure" -msgid "The z gap between the top support interface and object" -msgstr "This determines the Z gap between top support interfaces and objects." +msgid "The Z gap between the top support interface and object." +msgstr "L'écart z entre l'interface de support supérieure et l'objet" msgid "Bottom Z distance" -msgstr "Bottom Z distance" +msgstr "Distance Z inférieure" -msgid "The z gap between the bottom support interface and object" -msgstr "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." +msgstr "L'écart Z entre l'interface du support inférieur et l'objet" msgid "Support/raft base" -msgstr "Support/raft base" +msgstr "Support/base du radeau" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Filament to print support bases and rafts. \"Default\" means no specific " -"filament for support, and current filament is used" +"Filament pour imprimer les supports et radeaux. « Par défaut » signifie " +"qu'aucun filament spécifique n'est utilisé comme support et que le filament " +"actuel est utilisé" msgid "Avoid interface filament for base" -msgstr "Avoid interface filament for base" +msgstr "Réduire le filament d’interface pour la base" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Avoid using support interface filament to print support base if possible." +"Éviter d’utiliser le filament de l’interface du support pour imprimer la " +"base du support." msgid "" "Line width of support. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" +"Largeur de ligne des supports. Si elle est exprimée en %, elle sera calculée " +"sur le diamètre de la buse." msgid "Interface use loop pattern" -msgstr "Loop pattern interface" +msgstr "Modèle de boucle d'utilisation d'interface" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"This covers the top contact layer of the supports with loops. It is disabled " -"by default." +"Recouvrir la couche de contact supérieure des supports avec des boucles. " +"Désactivé par défaut." msgid "Support/raft interface" -msgstr "Support/raft interface" +msgstr "Support/base d'interface" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"Filament to print support interfaces. \"Default\" means no specific filament " -"for support interface, and current filament is used" +"Filament pour l'impression des interfaces de support. \"Défaut\" signifie " +"qu'il n'y a pas de filament spécifique pour l'interface de support et que le " +"filament actuel est utilisé" msgid "Top interface layers" -msgstr "Top interface layers" +msgstr "Couches d'interface supérieures" -msgid "Number of top interface layers" -msgstr "This is the number of top interface layers." +msgid "Number of top interface layers." +msgstr "Nombre de couches d'interface supérieures" msgid "Bottom interface layers" -msgstr "Bottom interface layers" +msgstr "Couches d'interface inférieures" -msgid "Number of bottom interface layers" -msgstr "Number of bottom interface layers" +msgid "Number of bottom interface layers." +msgstr "Nombre de couches d’interface inférieures" msgid "Same as top" -msgstr "Same as top" +msgstr "Identique au sommet" msgid "Top interface spacing" -msgstr "Top interface spacing" +msgstr "Espacement de l'interface supérieure" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "This is the spacing of interface lines. 0 means solid interface." +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" -msgstr "Bottom interface spacing" +msgstr "Espacement de l'interface inférieure" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" -"This is the spacing of bottom interface lines. 0 means solid interface." +"Espacement des lignes d'interface inférieures. Zéro signifie une interface " +"solide" -msgid "Speed of support interface" -msgstr "This is the speed for support interfaces." +msgid "Speed of support interface." +msgstr "Vitesse pour l'interface des supports" msgid "Base pattern" -msgstr "Base pattern" +msgstr "Motif de base" -msgid "Line pattern of support" -msgstr "This is the line pattern for support." +msgid "Line pattern of support." +msgstr "Motif de ligne de support" msgid "Rectilinear grid" -msgstr "Rectilinear grid" +msgstr "Grille rectiligne" msgid "Hollow" -msgstr "Hollow" +msgstr "Creux" msgid "Interface pattern" -msgstr "Interface pattern" +msgstr "Motif d'interface" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" -"This is the line pattern for support interfaces. The default pattern for non-" -"soluble support interfaces is Rectilinear while the default pattern for " -"soluble support interfaces is Concentric." +"Modèle de ligne de l'interface de support. Le modèle par défaut pour " +"l'interface de support non soluble est rectiligne, tandis que le modèle par " +"défaut pour l'interface de support soluble est concentrique" msgid "Rectilinear Interlaced" -msgstr "Rectilinear Interlaced" +msgstr "Rectiligne Entrelacé" msgid "Base pattern spacing" -msgstr "Base pattern spacing" +msgstr "Espacement du motif de base" -msgid "Spacing between support lines" -msgstr "This determines the spacing between support lines." +msgid "Spacing between support lines." +msgstr "Espacement entre les lignes de support" msgid "Normal Support expansion" -msgstr "Normal support expansion" +msgstr "Expansion normale du support" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." +msgstr "Augmenter (+) ou réduire (-) la portée horizontale du support normal" -msgid "Speed of support" -msgstr "This is the speed for support." +msgid "Speed of support." +msgstr "Vitesse pour les supports" msgid "" "Style and shape of the support. For normal support, projecting the supports " @@ -12591,58 +16551,83 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" +"Style et forme des supports. Pour les supports normaux, une grille régulière " +"créera des supports plus stables (par défaut), tandis que des tours de " +"supports bien ajustées économiseront du matériel et réduiront les marques " +"sur les objets.\n" +"Pour les supports arborescents, le style mince et organique fusionnera les " +"branches de manière plus agressive et économisera beaucoup de matière " +"(organique par défaut), tandis que le style hybride créera une structure " +"similaire aux supports normaux sous de grands surplombs plats." + +msgid "Default (Grid/Organic)" +msgstr "Défaut (Grille/Organique)" msgid "Snug" -msgstr "Snug" - -msgid "Tree Slim" -msgstr "Tree Slim" - -msgid "Tree Strong" -msgstr "Tree Strong" - -msgid "Tree Hybrid" -msgstr "Tree Hybrid" +msgstr "Ajusté" msgid "Organic" -msgstr "" +msgstr "Arborescents Organiques" + +msgid "Tree Slim" +msgstr "Arborescent Fin" + +msgid "Tree Strong" +msgstr "Arborescent Fort" + +msgid "Tree Hybrid" +msgstr "Arborescent Hybride" msgid "Independent support layer height" -msgstr "Independent support layer height" +msgstr "Hauteur de la couche de support indépendante" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " -"when the prime tower is enabled." +"La couche de support utilise la hauteur de la couche indépendamment de la " +"couche objet. Cela permet de personnaliser l’écart de Z et de gagner du " +"temps d'impression. Cette option ne sera pas valide lorsque la tour " +"d’amorçage sera activée." msgid "Threshold angle" -msgstr "Threshold angle" +msgstr "Angle de seuil" msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." msgstr "" -"Support will be generated for overhangs whose slope angle is below this " -"threshold." +"Un support sera généré pour les surplombs dont l'angle de pente est " +"inférieur au seuil." -msgid "Tree support branch angle" -msgstr "Tree support branch angle" +msgid "Threshold overlap" +msgstr "Chevauchement du seuil" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " -"printed more horizontally, allowing them to reach farther." +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." msgstr "" +"Si l’angle seuil est égal à zéro, le support sera généré pour les surplombs " +"dont le chevauchement est inférieur au seuil. Plus cette valeur est petite, " +"plus la pente du surplomb qui peut être imprimé sans support est importante." + +msgid "Tree support branch angle" +msgstr "Angle de branche support arborescent" + +msgid "" "This setting determines the maximum overhang angle that the branches of tree " "support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." +msgstr "" +"Ce paramètre détermine l'angle des surplombs maximum que les branches du " +"support arborescent peuvent faire. Si l'angle est augmenté, les branches " +"peuvent être imprimées plus horizontalement, ce qui leur permet d'aller plus " +"loin." msgid "Preferred Branch Angle" -msgstr "" +msgstr "Angle des branches préféré" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "" @@ -12650,17 +16635,22 @@ msgid "" "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle for branches to merge faster." msgstr "" +"Angle préféré des branches, lorsqu’elles ne doivent pas éviter le modèle. " +"Utilisez un angle inférieur pour les rendre plus verticaux et plus stables. " +"Utilisez un angle plus élevé pour que les branches fusionnent plus " +"rapidement." msgid "Tree support branch distance" -msgstr "Tree support branch distance" +msgstr "Distance de branche de support arborescent" msgid "" "This setting determines the distance between neighboring tree support nodes." msgstr "" -"This setting determines the distance between neighboring tree support nodes." +"Ce paramètre détermine la distance entre les nœuds de support arborescents " +"voisins." msgid "Branch Density" -msgstr "" +msgstr "Densité des branches" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "" @@ -12670,45 +16660,46 @@ msgid "" "interfaces instead of a high branch density value if dense interfaces are " "needed." msgstr "" - -msgid "Adaptive layer height" -msgstr "Adaptive layer height" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" +"Ajuste la densité de la structure des supports utilisée pour générer les " +"pointes des branches. Une valeur plus élevée donne de meilleurs surplombs, " +"mais les supports sont plus difficiles à supprimer. Il est donc recommandé " +"d’activer les interfaces de support supérieures au lieu d’une valeur de " +"densité de branches élevée si des interfaces denses sont nécessaires." msgid "Auto brim width" -msgstr "" +msgstr "Largeur de la bordure automatique" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" +"L’activation de cette option signifie que la largeur de la bordure des " +"supports arborescents sera automatiquement calculée" msgid "Tree support brim width" -msgstr "Tree support brim width" +msgstr "Largeur de bordure du support arborescent" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" +"Distance entre la branche du support arborescent et la ligne la plus externe " +"de la bordure" msgid "Tip Diameter" -msgstr "" +msgstr "Diamètre de la pointe" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." -msgstr "" +msgstr "Diamètre de l’extrémité des branches des supports organiques." msgid "Tree support branch diameter" -msgstr "Tree support branch diameter" +msgstr "Diamètre de branche de support arborescent" msgid "This setting determines the initial diameter of support nodes." -msgstr "This setting determines the initial diameter of support nodes." +msgstr "Ce paramètre détermine le diamètre initial des nœuds de support." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" -msgstr "" +msgstr "Angle du diamètre des branches" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "" @@ -12717,207 +16708,313 @@ msgid "" "over their length. A bit of an angle can increase stability of the organic " "support." msgstr "" - -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" +"Angle du diamètre des branches à mesure qu’elles deviennent progressivement " +"plus épaisses vers leurs bases. Un angle de 0 donnera aux branches une " +"épaisseur uniforme sur toute leur longueur. Un léger angle peut augmenter la " +"stabilité des supports organiques." msgid "Support wall loops" -msgstr "Support wall loops" +msgstr "Boucles de paroi de support" -msgid "This setting specify the count of walls around support" -msgstr "This setting specify the count of walls around support" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Ce paramètre spécifie le nombre de parois de support dans l’intervalle " +"[0,2]. 0 signifie auto." msgid "Tree support with infill" -msgstr "Tree support with infill" +msgstr "Support arborescent avec remplissage" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" -msgstr "" -"This setting specifies whether to add infill inside large hollows of tree " "support." +msgstr "" +"Ce paramètre spécifie s'il faut ajouter un remplissage à l'intérieur des " +"grands creux du support arborescent" + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" msgid "Activate temperature control" -msgstr "" +msgstr "Activer le contrôle de la température" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" +"Activer cette option pour le contrôle automatisé de la température du " +"caisson. Cette option active le lancement d’une commande M191 avant le code " +"« machine_start_gcode », qui fixe la température de la chambre et attend " +"qu’elle soit atteinte. En outre, elle déclenche une commande M141 à la fin " +"de l’impression pour éteindre le chauffage de la chambre, le cas échéant.\n" +"\n" +"Cette option repose sur la prise en charge des commandes M191 et M141 par le " +"micrologiciel, soit via des macros, soit de manière native, et est " +"généralement utilisée lorsqu’un chauffage de chambre actif est installé." msgid "Chamber temperature" -msgstr "Chamber temperature" +msgstr "Température du caisson" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on. At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials, the actual chamber temperature should not " -"be high to avoid clogs, so 0 (turned off) is highly recommended." +"Pour les matériaux à haute température tels que l’ABS, l’ASA, le PC et le " +"PA, une température de caisson plus élevée peut contribuer à supprimer ou à " +"réduire la déformation et, éventuellement, à augmenter la force de liaison " +"entre les couches. Cependant, dans le même temps, une température de chambre " +"plus élevée réduira l’efficacité de la filtration de l’air pour l’ABS et " +"l’ASA.\n" +"\n" +"Pour le PLA, le PETG, le TPU, le PVA et d’autres matériaux à basse " +"température, cette option doit être désactivée (réglée sur 0) car la " +"température de la chambre doit être basse pour éviter l’engorgement de " +"l’extrudeuse causé par le ramollissement du matériau au niveau du " +"heatbreak.\n" +"\n" +"S’il est activé, ce paramètre définit également une variable gcode nommée " +"chamber_temperature, qui peut être utilisée pour transmettre la température " +"de la chambre souhaitée à votre macro de démarrage de l’impression, ou à une " +"macro de trempe thermique comme celle-ci : PRINT_START (autres variables) " +"CHAMBER_TEMP=[chamber_temperature]. Cela peut être utile si votre imprimante " +"ne prend pas en charge les commandes M141/M191, ou si vous souhaitez gérer " +"le préchauffage dans la macro de démarrage de l’impression si aucun " +"chauffage de chambre actif n’est installé." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Nozzle temperature after the first layer" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Température de la buse pour les couches après la première" msgid "Detect thin wall" -msgstr "Detect thin walls" +msgstr "Détecter les parois fines" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" -"This detects thin walls which can’t contain two lines and uses a single line " -"to print. It may not print as well because it’s not a closed loop." +"Détecte les parois fines qui ne peuvent pas contenir deux largeurs de ligne. " +"Et utilisez une seule ligne pour imprimer. Peut ne pas être très bien " +"imprimé, car ce n'est pas en boucle fermée" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" -msgstr "" "This G-code is inserted when filament is changed, including T commands to " "trigger tool change." - -msgid "This gcode is inserted when the extrusion role is changed" msgstr "" +"Ce G-code est inséré lors du changement de filament, y compris la commande T " +"pour déclencher le changement d'outil." + +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Ce G-code est inséré lorsque le rôle d’extrusion est modifié." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" +"Largeur de ligne pdes surfaces supérieures. Si elle est exprimée en %, elle " +"sera calculée sur le diamètre de la buse." -msgid "Speed of top surface infill which is solid" -msgstr "This is the speed for solid top surface infill." +msgid "Speed of top surface infill which is solid." +msgstr "Vitesse de remplissage de la surface supérieure qui est solide" msgid "Top shell layers" -msgstr "Top shell layers" +msgstr "Couches supérieures de la coque" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" -"This is the number of solid layers of top shell, including the top surface " -"layer. When the thickness calculated by this value is thinner than the top " -"shell thickness, the top shell layers will be increased" +"Il s'agit du nombre de couches solides de la coque supérieure, y compris la " +"couche de surface supérieure. Lorsque l'épaisseur calculée par cette valeur " +"est plus fine que l'épaisseur de la coque supérieure, les couches de la " +"coque supérieure seront augmentées" msgid "Top solid layers" -msgstr "Top solid layers" +msgstr "Couches solides supérieures" msgid "Top shell thickness" -msgstr "Top shell thickness" +msgstr "Épaisseur de la coque supérieure" msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"The number of top solid layers is increased when slicing if the thickness " -"calculated by top shell layers is thinner than this value. This can avoid " -"having too thin a shell when layer height is small. 0 means that this " -"setting is disabled and thickness of top shell is determined simply by the " -"number of top shell layers." +"Le nombre de couches solides supérieures est augmenté lors du découpage si " +"l'épaisseur calculée par les couches de coque supérieures est inférieure à " +"cette valeur. Cela peut éviter d'avoir une coque trop fine lorsque la " +"hauteur de couche est faible. 0 signifie que ce paramètre est désactivé et " +"que l'épaisseur de la coque supérieure est absolument déterminée par les " +"couches de coque supérieures" -msgid "Speed of travel which is faster and without extrusion" -msgstr "This is the speed at which traveling is done." +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Vitesse de déplacement plus rapide et sans extrusion" msgid "Wipe while retracting" -msgstr "Wipe while retracting" +msgstr "Essuyer lors des rétractions" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"This moves the nozzle along the last extrusion path when retracting to clean " -"any leaked material on the nozzle. This can minimize blobs when printing a " -"new part after traveling." +"Déplacez la buse le long du dernier chemin d'extrusion lors de la rétraction " +"pour nettoyer la fuite de matériau sur la buse. Cela peut minimiser les " +"taches lors de l'impression d'une nouvelle pièce après le trajet" msgid "Wipe Distance" -msgstr "Wipe distance" +msgstr "Distance d’essuyage" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" +"Décrire la durée pendant laquelle la buse se déplacera le long de la " +"dernière trajectoire lors de la rétraction.\n" +"\n" +"En fonction de la durée de l’opération d’essuyage, de la vitesse et de la " +"longueur des réglages de rétraction de l’extrudeuse/filament, un mouvement " +"de rétraction peut être nécessaire pour rétracter le filament restant.\n" +"\n" +"Le réglage d’une valeur dans le paramètre de quantité de rétraction avant " +"essuyage ci-dessous permet d’effectuer toute rétraction excédentaire avant " +"l’essuyage, sinon elle sera effectuée après l’essuyage." msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"The wiping tower can be used to clean up residue on the nozzle and stabilize " -"the chamber pressure inside the nozzle in order to avoid appearance defects " -"when printing objects." +"La tour de purge peut être utilisée pour nettoyer les résidus sur la buse et " +"stabiliser la pression du caisson à l'intérieur de la buse afin d'éviter les " +"défauts d'apparence lors de l'impression d'objets." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" -msgstr "Purging volumes" +msgstr "Volumes de purge" msgid "Flush multiplier" -msgstr "Flush multiplier" +msgstr "Multiplicateur de purge" msgid "" "The actual flushing volumes is equal to the flush multiplier multiplied by " "the flushing volumes in the table." msgstr "" -"The actual flushing volumes is equal to the flush multiplier value " -"multiplied by the flushing volumes in the table." +"Les volumes de purge actuels sont égaux à la valeur du multiplicateur de " +"purge multiplié par les volumes de purge dans le tableau." msgid "Prime volume" -msgstr "Prime volume" +msgstr "Volume d’amorçage" msgid "The volume of material to prime extruder on tower." -msgstr "" -"This is the volume of material to prime the extruder with on the tower." +msgstr "Le volume de matériau pour amorcer l'extrudeur sur la tour." -msgid "Width of prime tower" -msgstr "This is the width of prime towers." +msgid "Width of the prime tower." +msgstr "Largeur de la tour d’amorçage" msgid "Wipe tower rotation angle" -msgstr "" +msgstr "Angle de rotation de la tour d’essuyage" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Angle de rotation de la tour d’essuyage par rapport à l’axe X." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." msgstr "" msgid "Stabilization cone apex angle" -msgstr "" +msgstr "Angle au sommet du cône de stabilisation" msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" - -msgid "Wipe tower purge lines spacing" -msgstr "" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "" +"Angle au sommet du cône utilisé pour stabiliser la tour d’essuyage. Un angle " +"plus grand signifie une base plus large." msgid "Maximum wipe tower print speed" -msgstr "" +msgstr "Vitesse maximale d’impression de la tour d’essuyage" +#, fuzzy msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " "tower sparse layers. When purging, if the sparse infill speed or calculated " @@ -12932,30 +17029,99 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" +"Vitesse d'impression maximale lors de la purge dans la tour de raclage et de " +"l'impression des couches éparses de la tour d'essuyage. Lors de la purge, si " +"la vitesse de remplissage ou la vitesse calculée à partir de la vitesse " +"volumétrique maximale du filament est inférieure, c'est la vitesse la plus " +"faible qui sera utilisée.\n" +"\n" +"Lors de l’impression des couches éparses, si la vitesse du périmètre interne " +"ou la vitesse calculée à partir de la vitesse volumétrique maximale du " +"filament est inférieure, c’est la vitesse la plus faible qui sera utilisée.\n" +"\n" +"L’augmentation de cette vitesse peut affecter la stabilité de la tour et " +"augmenter la force avec laquelle la buse entre en collision avec les blobs " +"qui peuvent s’être formés sur la tour d’essuyage.\n" +"\n" +"Avant d’augmenter ce paramètre au-delà de la valeur par défaut de 90 mm/s, " +"assurez-vous que votre imprimante peut effectuer un pontage fiable à des " +"vitesses élevées et que le suintement lors du changement d’outil est bien " +"contrôlé.\n" +"\n" +"Pour les périmètres externes de la tour d’essuyage, la vitesse du périmètre " +"interne est utilisée indépendamment de ce paramètre." -msgid "Wipe tower extruder" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" +"L’extrudeur à utiliser lors de l’impression du périmètre de la tour " +"d’essuyage. Réglez sur 0 pour utiliser celui qui est disponible (un non-" +"soluble serait préféré)." msgid "Purging volumes - load/unload volumes" -msgstr "" +msgstr "Volumes de purge - Volume de Chargement/Déchargement" msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" +"Ce vecteur enregistre les volumes requis pour passer de/vers chaque outil " +"utilisé sur la tour d’essuyage. Ces valeurs sont utilisées pour simplifier " +"la création des volumes de purge complets ci-dessous." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -12963,64 +17129,100 @@ msgid "" "printed with transparent filament, the mixed color infill will be seen " "outside. It will not take effect, unless the prime tower is enabled." msgstr "" -"Purging after filament change will be done inside objects' infills. This may " -"lower the amount of waste and decrease the print time. If the walls are " -"printed with transparent filament, the mixed color infill will be visible. " -"It will not take effect unless the prime tower is enabled." +"La purge après le changement de filament sera effectuée à l'intérieur des " +"matériaux de remplissage des objets. Cela peut réduire la quantité de " +"déchets et le temps d'impression. Si les parois sont imprimées avec un " +"filament transparent, le remplissage de couleurs mélangées sera visible. " +"Cela ne prendra effet que si la tour d’amorçage est activée." msgid "" "Purging after filament change will be done inside objects' support. This may " "lower the amount of waste and decrease the print time. It will not take " "effect, unless the prime tower is enabled." msgstr "" -"Purging after filament change will be done inside objects' support. This may " -"lower the amount of waste and decrease the print time. It will not take " -"effect unless a prime tower is enabled." +"La purge après le changement de filament se fera à l'intérieur du support " +"des objets. Cela peut réduire la quantité de déchets et le temps " +"d'impression. Cela ne prendra effet que si une tour d’amorçage est activée." msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." -msgstr "" -"This object will be used to purge the nozzle after a filament change to save " "filament and decrease the print time. Colors of the objects will be mixed as " "a result. It will not take effect unless the prime tower is enabled." +msgstr "" +"Cet objet sera utilisé pour purger la buse après un changement de filament " +"afin d'économiser du filament et de réduire le temps d'impression. Les " +"couleurs des objets seront mélangées en conséquence. Cela ne prendra effet " +"que si la tour d’amorçage est activée." msgid "Maximal bridging distance" -msgstr "" +msgstr "Distance de pont maximale" msgid "Maximal distance between supports on sparse infill sections." +msgstr "Distance maximale entre les supports sur les sections de remplissage." + +msgid "Wipe tower purge lines spacing" +msgstr "Espacement des lignes de purge de la tour d’essuyage" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Espacement des lignes de purge sur la tour d’essuyage." + +msgid "Extra flow for purging" +msgstr "Débit supplémentaire pour purger" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." msgstr "" +"Débit supplémentaire utilisé pour les lignes de purge de la tour d’essuyage. " +"Cela rend les lignes de purge plus épaisses ou plus étroites qu’elles ne le " +"seraient normalement. L’espacement est ajusté automatiquement." + +msgid "Idle temperature" +msgstr "Température au repos" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Température de la buse lorsque l’outil n’est pas utilisé dans les " +"configurations multi-outils. Cette fonction n’est utilisée que lorsque la " +"fonction « Prévention des suintements » est activée dans les paramètres " +"d’impression. Régler à 0 pour désactiver." msgid "X-Y hole compensation" -msgstr "X-Y hole compensation" +msgstr "Compensation de trou X-Y" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"Holes in objects will be grown or shrunk in the XY plane by the set value. " -"Positive values make holes bigger and negative values make holes smaller. " -"This function is used to adjust size slightly when objects have assembly " -"issues." +"Les trous de l'objet seront agrandis ou rétrécis dans le plan XY par la " +"valeur configurée. Une valeur positive agrandit les trous. Une valeur " +"négative rend les trous plus petits. Cette fonction est utilisée pour " +"ajuster légèrement la taille lorsque l'objet a un problème d'assemblage" msgid "X-Y contour compensation" -msgstr "X-Y contour compensation" +msgstr "Compensation de contour X-Y" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"The contour of objects will be grown or shrunk in the XY plane by the set " -"value. Positive values make contours bigger, and negative values make " -"contours smaller. This function is used to adjust sizes slightly when " -"objects have assembly issues." +"Le contour de l'objet sera agrandi ou rétréci dans le plan XY par la valeur " +"configurée. Une valeur positive agrandit le contour. Une valeur négative " +"rend le contour plus petit. Cette fonction est utilisée pour ajuster " +"légèrement la taille lorsque l'objet a un problème d'assemblage" msgid "Convert holes to polyholes" -msgstr "" +msgstr "Convertir les trous en trous polygones" msgid "" "Search for almost-circular holes that span more than one layer and convert " @@ -13028,80 +17230,97 @@ msgid "" "compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" +"Rechercher les trous presque circulaires qui s’étendent sur plusieurs " +"couches et convertir la géométrie en trous polygones. Utilise la taille de " +"la buse et le (plus grand) diamètre pour calculer le trou polygone.\n" +"Voir http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" -msgstr "" +msgstr "Marge de détection des trous polygones" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" +"Défection maximale d’un point par rapport au rayon estimé du cercle.\n" +"Comme les cylindres sont souvent exportés sous forme de triangles de taille " +"variable, les points peuvent ne pas se trouver sur la circonférence du " +"cercle. Ce paramètre vous permet d’élargir la détection.\n" +"En mm ou en % du rayon." msgid "Polyhole twist" -msgstr "" +msgstr "Torsion des trous polygones" msgid "Rotate the polyhole every layer." -msgstr "" +msgstr "Faites pivoter le trou polygone à chaque couche." msgid "G-code thumbnails" -msgstr "" +msgstr "Vignette G-code" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" +"Tailles des images à stocker dans les fichiers .gcode et .sl1/.sl1s, au " +"format suivant : \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" -msgstr "" +msgstr "Format des vignettes G-code" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" +"Format des vignettes G-code : PNG pour la meilleure qualité, JPG pour la " +"plus petite taille, QOI pour les firmwares à faible mémoire" msgid "Use relative E distances" -msgstr "Use relative E distances" +msgstr "Utiliser l’extrusion relative" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" +"L’extrusion relative est recommandée lors de l’utilisation de l’option « " +"label_objects ». Certains extrudeurs fonctionnent mieux avec cette option " +"non verrouillée (mode d’extrusion absolu). La tour d’essuyage n’est " +"compatible qu’avec le mode relatif. Il est recommandé sur la plupart des " +"imprimantes. L’option par défaut est cochée" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" -"The classic wall generator produces walls with constant extrusion width and " -"for very thin areas, gap-fill is used. The Arachne engine produces walls " -"with variable extrusion width." - -msgid "Classic" -msgstr "Classic" +"Le générateur de paroi classique produit des parois avec une largeur " +"d’extrusion constante et, pour les zones très fines, il utilise le " +"remplissage d’espace. Le moteur Arachne produit des parois avec une largeur " +"d’extrusion variable." msgid "Arachne" -msgstr "Arachne" +msgstr "Arachné" msgid "Wall transition length" -msgstr "Wall transition length" +msgstr "Longueur de la paroi de transition" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" -msgstr "" -"When transitioning between different numbers of walls as the part becomes " -"thinner, a certain amount of space is allotted to split or join the wall " "segments. It's expressed as a percentage over nozzle diameter." +msgstr "" +"Lorsque vous passez d'un nombre différent de parois à un autre lorsque la " +"pièce s'amincit, un certain espace est alloué pour séparer ou joindre les " +"segments de la paroi. Exprimé en pourcentage par rapport au diamètre de la " +"buse" msgid "Wall transitioning filter margin" -msgstr "Wall transitioning filter margin" +msgstr "Marge du filtre de transition de paroi" msgid "" "Prevent transitioning back and forth between one extra wall and one less. " @@ -13110,630 +17329,976 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Prevent transitioning back and forth between one extra wall and one less. " -"This margin extends the range of extrusion widths which follow to [Minimum " -"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " -"margin reduces the number of transitions, which reduces the number of " -"extrusion starts/stops and travel time. However, large extrusion width " -"variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"Empêchez les allers-retours entre une paroi supplémentaire et une paroi de " +"moins. Cette marge étend la plage de largeurs d'extrusion qui suit jusqu'à " +"[Largeur de paroi minimale - marge, 2* Largeur de paroi minimale + marge]. " +"L'augmentation de cette marge réduit le nombre de transitions, ce qui réduit " +"le nombre de démarrages/arrêts d'extrusion et le temps de trajet. Cependant, " +"une variation importante de la largeur d'extrusion peut entraîner des " +"problèmes de sous-extrusion ou de surextrusion. Il est exprimé en " +"pourcentage par rapport au diamètre de la buse" msgid "Wall transitioning threshold angle" -msgstr "Wall transitioning threshold angle" +msgstr "Angle du seuil de transition de la paroi" msgid "" "When to create transitions between even and odd numbers of walls. A wedge " "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"When to create transitions between even and odd numbers of walls. A wedge " -"shape with an angle greater than this setting will not have transitions and " -"no walls will be printed in the center to fill the remaining space. Reducing " -"this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"Quand créer des transitions entre les nombres pairs et impairs de parois. " +"Une forme cunéiforme dont l'angle est supérieur à ce paramètre n'aura pas de " +"transitions et aucune paroi ne sera imprimé au centre pour remplir l'espace " +"restant. En réduisant ce paramètre, vous réduisez le nombre et la longueur " +"de ces parois centrales, mais vous risquez de laisser des espaces vides ou " +"de surextruder les parois" msgid "Wall distribution count" -msgstr "Wall distribution count" +msgstr "Nombre de parois distribuées" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" -"The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"Nombre de parois, comptées à partir du centre, sur lesquelles la variation " +"doit être répartie. Des valeurs plus faibles signifient que la largeur des " +"parois extérieures ne change pas" msgid "Minimum feature size" -msgstr "Minimum feature size" +msgstr "Taille minimale de l'élément" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the minimum " -"feature size will be widened to the minimum wall width. It's expressed as a " -"percentage over nozzle diameter" msgid "Minimum wall length" -msgstr "" +msgstr "Longueur minimale de la paroi" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" +"Ajustez cette valeur pour éviter que des parois courtes et non fermées " +"soient imprimées, ce qui pourrait augmenter le temps d’impression. Des " +"valeurs plus élevées suppriment des parois plus nombreuses et plus longues.\n" +"\n" +"REMARQUE : les surfaces inférieures et supérieures ne sont pas affectées par " +"cette valeur afin d’éviter les lacunes visuelles sur le côté du modèle. " +"Réglez le « seuil d’une paroi » dans les paramètres avancés ci-dessous pour " +"ajuster la sensibilité de ce qui est considéré comme une surface supérieure. " +"Le « seuil d’une paroi » n’est visible que si ce paramètre est supérieur à " +"la valeur par défaut de 0,5 ou si l’option « surfaces supérieures à une " +"paroi » est activée." msgid "First layer minimum wall width" -msgstr "" +msgstr "Largeur minimale de la paroi de la première couche" msgid "" "The minimum wall width that should be used for the first layer is " "recommended to be set to the same size as the nozzle. This adjustment is " "expected to enhance adhesion." msgstr "" +"Il est recommandé de définir la largeur minimale de paroi à utiliser pour la " +"première couche sur la même taille que la buse. Cet ajustement devrait " +"améliorer l’adhérence." msgid "Minimum wall width" -msgstr "Minimum wall width" +msgstr "Largeur minimale de la paroi" msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" -"Width of the wall that will replace thin features (according to the Minimum " -"feature size) of the model. If the Minimum wall width is thinner than the " -"thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"Largeur de la paroi qui remplacera les éléments fins (selon la taille " +"minimale des éléments) du modèle. Si la largeur minimale de la paroi est " +"inférieure à l'épaisseur de l'élément, la paroi deviendra aussi épaisse que " +"l'élément lui-même. Elle est exprimée en pourcentage par rapport au diamètre " +"de la buse" msgid "Detect narrow internal solid infill" -msgstr "Detect narrow internal solid infill" +msgstr "Détecter un remplissage plein interne étroit" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." -msgstr "" "This option will auto-detect narrow internal solid infill areas. If enabled, " "the concentric pattern will be used for the area to speed up printing. " "Otherwise, the rectilinear pattern will be used by default." +msgstr "" +"Cette option détectera automatiquement la zone de remplissage plein interne " +"étroite. S'il est activé, un motif concentrique sera utilisé pour la zone " +"afin d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par " +"défaut." msgid "invalid value " -msgstr "invalid value " +msgstr "valeur invalide " msgid "Invalid value when spiral vase mode is enabled: " -msgstr "Invalid value when spiral vase mode is enabled: " +msgstr "Valeur non valide lorsque le mode vase en spirale est activé: " msgid "too large line width " -msgstr "too large line width " +msgstr "largeur de ligne trop importante " msgid " not in range " -msgstr " not in range " +msgstr " hors plage " -msgid "Minimum save" +msgid "Export 3MF" +msgstr "Exporter 3MF" + +msgid "Export project as 3MF." +msgstr "Exporter le projet au format 3MF." + +msgid "Export slicing data" +msgstr "Exporter les données de tranchage" + +msgid "Export slicing data to a folder." +msgstr "Exporter les données de tranchage vers un dossier." + +msgid "Load slicing data" +msgstr "Charger les données de tranchage" + +msgid "Load cached slicing data from directory." +msgstr "Charger les données de tranchage mises en cache à partir du répertoire" + +msgid "Export STL" +msgstr "Exporter STL" + +msgid "Export the objects as single STL." +msgstr "Exporter les objets en tant que STL unique." + +msgid "Export multiple STLs" +msgstr "Exporter plusieurs STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Exporter les objets sous forme de STLs multiples dans un répertoire" + +msgid "Slice" +msgstr "Découper" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Trancher toutes les plaques : 0-toutes, i-plaque i, autres-invalides" + +msgid "Show command help." +msgstr "Afficher l'aide de la commande." + +msgid "UpToDate" +msgstr "À jour" + +msgid "Update the configs values of 3mf to latest." msgstr "" +"Mettez à jour les valeurs de configuration 3mf à la version la plus récente." -msgid "export 3mf with minimum size." -msgstr "" - -msgid "No check" -msgstr "No check" - -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "Do not run any validity checks, such as G-code path conflicts check." - -msgid "Ensure on bed" -msgstr "" +msgid "downward machines check" +msgstr "contrôle des machines descendantes" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"check whether current machine downward compatible with the machines in the " +"list." msgstr "" +"vérifier si la machine actuelle est compatible avec les machines de la liste" + +msgid "Load default filaments" +msgstr "Charger les filaments par défaut" + +msgid "Load first filament as default for those not loaded." +msgstr "" +"Charger le premier filament comme défaut pour ceux qui ne sont pas chargés" + +msgid "Minimum save" +msgstr "Sauvegarde minimale" + +msgid "export 3mf with minimum size." +msgstr "exporter le fichier 3mf avec une taille minimale." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "nombre maximal de triangles par plaque pour le tranchage." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "temps de tranchage maximal par plaque en secondes." + +msgid "No check" +msgstr "Pas de vérification" + +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" +"Ne pas effectuer de contrôle de validité, tel que le contrôle des conflits " +"de parcours de G-code." + +msgid "Normative check" +msgstr "Contrôle normatif" + +msgid "Check the normative items." +msgstr "Vérifiez les éléments normatifs." + +msgid "Output Model Info" +msgstr "Information du Modèle de Sortie" + +msgid "Output the model's information." +msgstr "Sortie des informations du modèle." + +msgid "Export Settings" +msgstr "Paramètres d'exportation" + +msgid "Export settings to a file." +msgstr "Exporter les paramètres vers un fichier." + +msgid "Send progress to pipe" +msgstr "Envoyer la progression à la queue" + +msgid "Send progress to pipe." +msgstr "Envoyer la progression à la queue." + +msgid "Arrange Options" +msgstr "Options d'organisation" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Options d'organisation : 0-désactiver, 1-activer, autres-auto" + +msgid "Repetition count" +msgstr "Nombre de répétitions" + +msgid "Repetition count of the whole model." +msgstr "Nombre de répétitions de l'ensemble du modèle" + +msgid "Ensure on bed" +msgstr "Assurer sur le plateau" + +msgid "" +"Lift the object above the bed when it is partially below. Disabled by " +"default." +msgstr "" +"Placer l’objet sur le plateau lorsqu’il est partiellement en dessous. " +"Désactivé par défaut" + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Agencer les modèles fournis sur un plateau et les fusionner en un seul " +"modèle afin de ne réaliser les actions qu'une seule fois." + +msgid "Convert Unit" +msgstr "Convertir l'unité" + +msgid "Convert the units of model." +msgstr "Convertir les unités du modèle" msgid "Orient Options" -msgstr "" +msgstr "Options d’orientation" msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "" +msgstr "Options d’orientation : 0-désactiver, 1-activer, autres-auto" msgid "Rotation angle around the Z axis in degrees." +msgstr "Angle de rotation autour de l’axe Z en degrés." + +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." msgstr "" msgid "Rotate around Y" -msgstr "" +msgstr "Rotation autour de l’axe Y" msgid "Rotation angle around the Y axis in degrees." +msgstr "Angle de rotation autour de l’axe Y en degrés." + +msgid "Scale the model by a float factor." +msgstr "Mettre à l'échelle le modèle par un facteur flottant" + +msgid "Load General Settings" +msgstr "Charger les paramètres généraux" + +msgid "Load process/machine settings from the specified file." +msgstr "" +"Charger les paramètres de processus/machine à partir du fichier spécifié" + +msgid "Load Filament Settings" +msgstr "Charger les paramètres de filament" + +msgid "Load filament settings from the specified file list." +msgstr "" +"Charger les paramètres de filament à partir de la liste de fichiers spécifiée" + +msgid "Skip Objects" +msgstr "Ignorer les Objets" + +msgid "Skip some objects in this print." +msgstr "Ignorer certains objets de cette impression" + +msgid "Clone Objects" +msgstr "Cloner des objets" + +msgid "Clone objects in the load list." +msgstr "Cloner des objets dans la liste de chargement" + +msgid "Load uptodate process/machine settings when using uptodate" msgstr "" -msgid "Data directory" +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." msgstr "" +"charger les paramètres actualisés du processus/de la machine à partir du " +"fichier spécifié lors de l'utilisation de la mise à jour" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"charger les paramètres de filament actualisés à partir du fichier spécifié " +"lors de l’utilisation de l’actualisation" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"si l’option est activée, vérifier si la machine actuelle est compatible avec " +"les machines de la liste." + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" +"la liste des paramètres de la machine doit faire l’objet d’une vérification " +"descendante" + +msgid "Load assemble list" +msgstr "Charger la liste d’assemblage" + +msgid "Load assemble object list from config file." +msgstr "" +"Chargement de la liste des objets assemblés à partir du fichier de " +"configuration" + +msgid "Data directory" +msgstr "Répertoire de données" msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" +"Charger et stocker les paramètres dans le répertoire donné. Ceci est utile " +"pour maintenir différents profils ou inclure des configurations à partir " +"d’un stockage réseau." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Répertoire de sortie" + +msgid "Output directory for the exported files." +msgstr "Répertoire de sortie des fichiers exportés." + +msgid "Debug level" +msgstr "Niveau de débogage" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" +"avertissement, 3 :info, 4 :débogage, 5 :trace\n" + +msgid "Enable timelapse for print" +msgstr "Activer le timelapse pour l’impression" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" +"Si cette option est activée, cette découpe sera prise en charge en utilisant " +"un timelapse" + +msgid "Load custom G-code" +msgstr "Charger un G-code personnalisé" + +msgid "Load custom G-code from json." +msgstr "Charger un G-code personnalisé à partir de json." + +msgid "Load filament IDs" +msgstr "Chargement des identifiants de filaments" + +msgid "Load filament IDs for each object." msgstr "" -msgid "Load custom gcode from json" +msgid "Allow multiple colors on one plate" +msgstr "Permettre l’utilisation de plusieurs couleurs sur une même plaque" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Si cette option est activée, l’arrangement permettra d’utiliser plusieurs " +"couleurs sur une même plaque" + +msgid "Allow rotation when arranging" +msgstr "Autoriser des rotations dans le cadre d’un réagencement" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Si cette option est activée, l’arrangement autorisera les rotations lors du " +"placement de l’objet" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Éviter la région d’étalonnage de l’extrusion lors de l’arrangement" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Si cette option est activée, l’arrangement évitera la région d’étalonnage de " +"l’extrusion lorsqu’il placera l’objet" + +msgid "Skip modified G-code in 3mf" +msgstr "Ignorer les G-codes modifiés dans le 3mf" + +msgid "Skip the modified G-code in 3mf from Printer or filament Presets." +msgstr "" +"Sauter les G-codes modifiés dans le 3mf à partir des préréglages de " +"l’imprimante ou du filament." + +msgid "MakerLab name" +msgstr "Nom dans MakerLab" + +msgid "MakerLab name to generate this 3mf." +msgstr "Nom de MakerLab pour générer ce 3mf" + +msgid "MakerLab version" +msgstr "Version de MakerLab" + +msgid "MakerLab version to generate this 3mf." +msgstr "Version de MakerLab pour générer ce 3mf" + +msgid "metadata name list" +msgstr "liste de noms de métadonnées" + +msgid "metadata name list added into 3mf." +msgstr "liste de noms de métadonnées ajoutée dans le 3mf" + +msgid "metadata value list" +msgstr "liste des valeurs des métadonnées" + +msgid "metadata value list added into 3mf." +msgstr "liste des valeurs de métadonnées ajoutée au 3mf" + +msgid "Allow 3mf with newer version to be sliced" msgstr "" -msgid "Current z-hop" -msgstr "" +msgid "Allow 3mf with newer version to be sliced." +msgstr "Autoriser la découpe de 3mf avec une version plus récente" -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "" +msgid "Current Z-hop" +msgstr "Saut en z actuel" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "Contient le saut en z présent au début du bloc de G-code personnalisé." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" +"Position de l’extrudeuse au début du bloc de G-code personnalisé. Si le G-" +"code personnalisé se déplace ailleurs, il doit écrire dans cette variable " +"afin que PrusaSlicer sache d’où il se déplace lorsqu’il reprend le contrôle." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" +"État de rétraction au début du bloc de G-code personnalisé. Si le G-code " +"personnalisé déplace l’axe de l’extrudeuse, il doit écrire dans cette " +"variable pour que PrusaSlicer se rétracte correctement lorsqu’il reprend le " +"contrôle." -msgid "Extra deretraction" -msgstr "" +msgid "Extra de-retraction" +msgstr "Dérétraction supplémentaire" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" +"L’amorçage supplémentaire de l’extrudeuse après la dérétraction est " +"actuellement prévu." + +msgid "Absolute E position" +msgstr "Position E absolue" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Position actuelle de l’axe de l’extrudeuse. Utilisé uniquement avec " +"l’adressage absolu de de I’extrudeur." msgid "Current extruder" -msgstr "" +msgstr "Extrudeur actuel" msgid "Zero-based index of currently used extruder." -msgstr "" +msgstr "Index à base zéro de l’extrudeur actuellement utilisé." msgid "Current object index" -msgstr "" +msgstr "Index de l’objet actuel" msgid "" "Specific for sequential printing. Zero-based index of currently printed " "object." msgstr "" +"Spécifique à l’impression séquentielle. Index basé sur zéro de l’objet en " +"cours d’impression." msgid "Has wipe tower" -msgstr "" +msgstr "Possède une tour d’essuyage" msgid "Whether or not wipe tower is being generated in the print." -msgstr "" +msgstr "Indique si la tour d’essuyage est générée ou non dans l’impression." msgid "Initial extruder" -msgstr "" +msgstr "Extrudeur initial" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_tool." msgstr "" - -msgid "Import Profile" -msgstr "Import Profile" - -msgid "Import Web Resource" -msgstr "Import Web Resource" - -msgid "Merge with" -msgstr "Merge with" - -msgid "The following profiles could not be imported due to outdated versions." -msgstr "The following profiles could not be imported due to outdated versions." - -msgid "This web resouce could not be imported due to outdated versions." -msgstr "This web resource could not be imported due to outdated versions." - -msgid "Import Failed" -msgstr "Import Failed" - -msgid "Please choose a system profile package file:" -msgstr "Please choose a system profile package file:" - -msgid "Please choose a web resource package file:" -msgstr "Please choose a web resource package file:" - -msgid "Updating the web resources requires application restart." -msgstr "Updating the web resources requires application restart." - -msgid "Updating the system resources requires application restart." -msgstr "Updating the system resources requires application restart." - -msgid "Print Preprocessing" -msgstr "Print Preprocessing" - -msgid "Pretreat the uploaded content" -msgstr "Pretreat the uploaded content" +"Index basé sur zéro du premier extrudeur utilisé dans l’impression. " +"Identique à initial_tool." msgid "Initial tool" -msgstr "" +msgstr "Outil de départ" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_extruder." msgstr "" +"Index basé sur zéro du premier extrudeur utilisé dans l’impression. " +"Identique à initial_extruder." msgid "Is extruder used?" -msgstr "" +msgstr "L’extrudeur est-il utilisé ?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" +"Vecteur de bools indiquant si un extrudeur donné est utilisé dans " +"l’impression." + +msgid "Has single extruder MM priming" +msgstr "Dispose d’un seul extrudeur MM d’amorçage" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Les régions d’amorçage multimatériaux supplémentaires sont-elles utilisées " +"dans cette impression ?" msgid "Volume per extruder" -msgstr "" +msgstr "Volume par extrudeur" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" +"Volume total de filament extrudé par extrudeur pendant toute la durée de " +"l’impression." -msgid "Total toolchanges" -msgstr "" +msgid "Total tool changes" +msgstr "Nombre total de changements d’outils" -msgid "Number of toolchanges during the print." -msgstr "" +msgid "Number of tool changes during the print." +msgstr "Nombre de changements d’outils pendant l’impression." msgid "Total volume" -msgstr "" +msgstr "Volume total" msgid "Total volume of filament used during the entire print." msgstr "" +"Volume total de filament utilisé pendant toute la durée de l’impression." msgid "Weight per extruder" -msgstr "" +msgstr "Poids par extrudeur" msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." msgstr "" +"Poids par extrudeur extrudé pendant toute la durée de l’impression. Calculé " +"à partir de la valeur filament_density dans Filament Settings." msgid "Total weight" -msgstr "" +msgstr "Poids total" msgid "" "Total weight of the print. Calculated from filament_density value in " "Filament Settings." msgstr "" +"Poids total de l’impression. Calculé à partir de la valeur filament_density " +"dans Filament Settings." msgid "Total layer count" -msgstr "" +msgstr "Nombre total de couches" msgid "Number of layers in the entire print." -msgstr "" +msgstr "Nombre de couches dans toute l’impression." msgid "Number of objects" -msgstr "" +msgstr "Nombre d’objets" msgid "Total number of objects in the print." -msgstr "" +msgstr "Nombre total d’objets dans l’impression." msgid "Number of instances" -msgstr "" +msgstr "Nombre d’instances" msgid "Total number of object instances in the print, summed over all objects." msgstr "" +"Nombre total d’instances d’objets dans l’impression, additionné à tous les " +"objets." msgid "Scale per object" -msgstr "" +msgstr "Mise à l’échelle par objet" msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" +"Contient une chaîne de caractères contenant des informations sur la mise à " +"l’échelle appliquée aux différents objets. L’indexation des objets est basée " +"sur le zéro (le premier objet a l’index 0).\n" +"Exemple : « x:100% y:50% z:100% »." msgid "Input filename without extension" -msgstr "" +msgstr "Nom du fichier d’entrée sans extension" msgid "Source filename of the first object, without extension." -msgstr "" +msgstr "Nom du fichier source du premier objet, sans extension." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" +"Le vecteur a deux éléments : les coordonnées x et y du point. Valeurs en mm." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" +"Le vecteur a deux éléments : les dimensions x et y de la boîte de " +"délimitation. Valeurs en mm." msgid "First layer convex hull" -msgstr "" +msgstr "Coque convexe de la première couche" msgid "" "Vector of points of the first layer convex hull. Each element has the " "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" +"Vecteur de points de la première couche de la coque convexe. Chaque élément " +"a le format suivant : ‘[x, y]’ (x et y sont des nombres à virgule flottante " +"en mm)." msgid "Bottom-left corner of first layer bounding box" msgstr "" +"Coin inférieur gauche de la boîte de délimitation de la première couche" msgid "Top-right corner of first layer bounding box" -msgstr "" +msgstr "Coin supérieur droit de la boîte de délimitation de la première couche" msgid "Size of the first layer bounding box" -msgstr "" +msgstr "Taille de la boîte de délimitation de la première couche" msgid "Bottom-left corner of print bed bounding box" -msgstr "" +msgstr "Coin inférieur gauche de la boîte de délimitation du lit d’impression" msgid "Top-right corner of print bed bounding box" msgstr "" +"Coin supérieur droit de la boîte de délimitation du plateau d’impression" msgid "Size of the print bed bounding box" -msgstr "" +msgstr "Taille du plateau d’impression" msgid "Timestamp" -msgstr "" +msgstr "Horodatage" msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "" +msgstr "Chaîne contenant l’heure actuelle au format yyyyMMdd-hhmmss." msgid "Day" -msgstr "" +msgstr "Jour" msgid "Hour" -msgstr "" +msgstr "Heure" msgid "Minute" -msgstr "" +msgstr "Minute" + +msgid "Second" +msgstr "Seconde" msgid "Print preset name" -msgstr "" +msgstr "Imprimer le nom de la présélection" msgid "Name of the print preset used for slicing." -msgstr "" +msgstr "Nom du préréglage d’impression utilisé pour le découpage." msgid "Filament preset name" -msgstr "" +msgstr "Nom du préréglage du filament" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" +"Noms des préréglages de filaments utilisés pour le découpage. La variable " +"est un vecteur contenant un nom pour chaque extrudeur." msgid "Printer preset name" -msgstr "" +msgstr "Nom du préréglage de l’imprimante" msgid "Name of the printer preset used for slicing." -msgstr "" +msgstr "Nom du préréglage de l’imprimante utilisé pour la découpe." msgid "Physical printer name" -msgstr "" +msgstr "Nom de l’imprimante physique" msgid "Name of the physical printer used for slicing." +msgstr "Nom de l’imprimante physique utilisé pour la découpe." + +msgid "Number of extruders" +msgstr "Nombre d’extrudeurs" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." msgstr "" +"Nombre total d’extrudeurs, qu’ils soient ou non utilisées dans l’impression " +"en cours." msgid "Layer number" -msgstr "" +msgstr "Numéro de couche" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" +"Indice de la couche actuelle. Base unitaire (c’est-à-dire que la première " +"couche porte le numéro 1)." -msgid "Layer z" -msgstr "" +msgid "Layer Z" +msgstr "Couche z" msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." msgstr "" +"Hauteur de la couche actuelle au-dessus du plateau d’impression, mesurée " +"jusqu’au sommet de la couche." -msgid "Maximal layer z" -msgstr "" +msgid "Maximal layer Z" +msgstr "Couche maximale z" msgid "Height of the last layer above the print bed." -msgstr "" +msgstr "Hauteur de la dernière couche au-dessus du plateau d’impression." msgid "Filament extruder ID" -msgstr "" +msgstr "ID de l’extrudeur de filaments" msgid "The current extruder ID. The same as current_extruder." -msgstr "" +msgstr "L’ID de l’extrudeur actuel. Identique à current_extruder." msgid "Error in zip archive" -msgstr "Error in zip archive" +msgstr "Erreur dans l'archive zip" msgid "Generating walls" -msgstr "Generating walls" +msgstr "Génération de parois" msgid "Generating infill regions" -msgstr "Generating infill regions" +msgstr "Génération de régions de remplissage" msgid "Generating infill toolpath" -msgstr "Generating infill toolpath" +msgstr "Génération d'un parcours d'outil de remplissage" msgid "Detect overhangs for auto-lift" -msgstr "Detect overhangs for auto-lift" - -msgid "Generating support" -msgstr "Generating support" +msgstr "Détectez les surplombs pour un levage automatique" msgid "Checking support necessity" -msgstr "Checking support necessity" +msgstr "Vérification de la nécessité du support" msgid "floating regions" -msgstr "floating regions" +msgstr "régions flottantes" msgid "floating cantilever" -msgstr "floating cantilever" +msgstr "surplomb flottant" msgid "large overhangs" -msgstr "large overhangs" +msgstr "grands surplombs" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"It seems object %s has %s. Please re-orient the object or enable support " -"generation." +"Il semble que l'objet %s possède %s. Veuillez réorienter l'objet ou activer " +"la génération de support." + +msgid "Generating support" +msgstr "Génération des supports" msgid "Optimizing toolpath" -msgstr "Optimizing toolpath" +msgstr "Optimisation du parcours d'outil" msgid "Slicing mesh" -msgstr "Slicing mesh" +msgstr "Découpe du maillage" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"No layers were detected. You might want to repair your STL file(s) or check " -"their size or thickness and retry.\n" +"Aucune couche n'a été détectée. Vous pouvez réparer vos STL, vérifier leur " +"taille ou leur épaisseur et réessayer.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"An object's XY size compensation will not be used because it is also color-" -"painted.\n" -"XY Size compensation can not be combined with color-painting." +"La compensation de la taille XY d'un objet ne sera pas utilisée parce qu'il " +"est également peint en couleur.\n" +"La compensation de la taille XY ne peut pas être combinée avec la peinture " +"couleur." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Support: generate toolpath at layer %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Support: detect overhangs" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" -msgstr "Support: generate contact points" +msgstr "Support : génération des points de contact" -msgid "Support: propagate branches" -msgstr "Support: propagate branches" +msgid "Loading of a model file failed." +msgstr "Le chargement du fichier modèle a échoué." -msgid "Support: draw polygons" -msgstr "Support: draw polygons" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Support: generate toolpath" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Support: generate polygons at layer %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Support: fix holes at layer %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Support: propagate branches at layer %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Le fichier fourni n'a pas pu être lu car il est vide" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unknown file format: input file must have .stl, .obj, or .amf(.xml) " -"extension." - -msgid "Loading of a model file failed." -msgstr "Loading of model file failed." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "The supplied file couldn't be read because it's empty." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." +"stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "Unknown file format: input file must have .3mf or .zip.amf extension." - -msgid "Canceled" -msgstr "Canceled" +msgstr "" +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .3mf, .zip ou .amf." msgid "load_obj: failed to parse" -msgstr "load_obj: failed to parse" +msgstr "load_obj : échec de l'analyse" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "charger mtl dans obj : échec de l’analyse" msgid "The file contains polygons with more than 4 vertices." -msgstr "The file contains polygons with more than 4 vertices." +msgstr "Le fichier contient des polygones comportant plus de 4 sommets." msgid "The file contains polygons with less than 2 vertices." -msgstr "The file contains polygons with less than 2 vertices." +msgstr "Le fichier contient des polygones comportant moins de 2 sommets." msgid "The file contains invalid vertex index." -msgstr "The file contains invalid vertex index." +msgstr "Le fichier contient un index de sommets non valide." msgid "This OBJ file couldn't be read because it's empty." -msgstr "This OBJ file couldn't be read because it's empty." +msgstr "Ce fichier OBJ n'a pas pu être lu car il est vide." msgid "Flow Rate Calibration" -msgstr "Flow Rate Calibration" +msgstr "Calibration du débit" msgid "Max Volumetric Speed Calibration" -msgstr "Max Volumetric Speed Calibration" +msgstr "Calibration de la vitesse volumétrique maximale" msgid "Manage Result" -msgstr "Manage Result" +msgstr "Gérer le résultat" msgid "Manual Calibration" -msgstr "Manual Calibration" +msgstr "Calibration manuelle" msgid "Result can be read by human eyes." -msgstr "Result can be read by human eyes." +msgstr "Le résultat peut être lu par des yeux humains." msgid "Auto-Calibration" -msgstr "Auto-Calibration" +msgstr "Calibration Auto" msgid "We would use Lidar to read the calibration result" -msgstr "We would use Lidar to read the calibration result" +msgstr "Le Micro-Lidar sera utilisé pour lire le résultat de la calibration" msgid "Prev" -msgstr "Prev" +msgstr "Précédent" msgid "Recalibration" msgstr "Recalibration" msgid "Calibrate" -msgstr "Calibrate" +msgstr "Calibrations" msgid "Finish" -msgstr "Finish" +msgstr "Terminer" msgid "How to use calibration result?" -msgstr "How can I use calibration results?" +msgstr "Comment utiliser le résultat de la calibration ?" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" -"You could change the Flow Dynamics Calibration Factor in material editing" +"Vous pouvez modifier le facteur de calibration dynamique du débit dans les " +"paramètres du filament" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" -"The current firmware version of the printer does not support calibration.\n" -"Please upgrade the printer firmware." +"La version actuelle du firmware de l'imprimante ne prend pas en charge la " +"calibration.\n" +"Veuillez mettre à jour le firmware de l'imprimante." msgid "Calibration not supported" -msgstr "Calibration not supported" +msgstr "Calibration non pris en charge" msgid "Error desc" -msgstr "Error desc" +msgstr "Description" msgid "Extra info" -msgstr "Extra info" +msgstr "Informations" msgid "Flow Dynamics" -msgstr "Flow Dynamics" +msgstr "Calibration dynamique" msgid "Flow Rate" -msgstr "Flow Rate" +msgstr "Débit" msgid "Max Volumetric Speed" -msgstr "Max Volumetric Speed" +msgstr "Vitesse volumétrique maximale" #, c-format, boost-format msgid "" @@ -13741,68 +18306,74 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" -"Please input valid values:\n" -"Start value: >= %.1f\n" -"End value: <= %.1f\n" -"End value: > Start value\n" -"Value step: >= %.3f)" +"Veuillez saisir des valeurs valides :\n" +"Début: >= %.1f\n" +"Fin: <= %.1f\n" +"Fin: > Début\n" +"Intervalle: >= %.3f" msgid "The name cannot be empty." -msgstr "The name cannot be empty." +msgstr "Le nom ne peut pas être vide." + +#, c-format, boost-format +msgid "The selected preset: %s was not found." +msgstr "Le préréglage sélectionné : %s est introuvable." + +msgid "The name cannot be the same as the system preset name." +msgstr "Le nom ne peut pas être le même que le nom du préréglage système." + +msgid "The name is the same as another existing preset name" +msgstr "Le nom est le même qu’un autre nom de préréglage existant" + +msgid "create new preset failed." +msgstr "la création d’un nouveau préréglage a échoué." #, c-format, boost-format msgid "The selected preset: %s is not found." -msgstr "The selected preset: %s is not found." +msgstr "" -msgid "The name cannot be the same as the system preset name." -msgstr "The name cannot be the same as the system preset name." - -msgid "The name is the same as another existing preset name" -msgstr "The name is the same as another existing preset name" - -msgid "create new preset failed." -msgstr "create new preset failed." +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Are you sure to cancel the current calibration and return to the home page?" +"Voulez-vous vraiment annuler la calibration en cours et revenir à la page " +"d’accueil ?" msgid "No Printer Connected!" -msgstr "No Printer Connected!" +msgstr "Aucune imprimante connectée !" msgid "Printer is not connected yet." -msgstr "Printer is not connected yet." +msgstr "L’imprimante n’est pas encore connectée." msgid "Please select filament to calibrate." -msgstr "Please select filament to calibrate." +msgstr "Veuillez sélectionner le filament à calibrer." msgid "The input value size must be 3." -msgstr "The input value size must be 3." +msgstr "La valeur saisie doit être 3." msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" +"Ce type de machine ne peut contenir que 16 résultats historiques par buse. " +"Vous pouvez supprimer les résultats historiques existants, puis lancer " +"l’étalonnage. Vous pouvez également poursuivre l’étalonnage, mais vous ne " +"pouvez pas créer de nouveaux résultats historiques d’étalonnage.\n" +"Souhaitez-vous toujours poursuivre le calibrage ?" -msgid "Connecting to printer..." -msgstr "Connecting to printer..." - -msgid "The failed test result has been dropped." -msgstr "The failed test result has been dropped." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Flow Dynamics Calibration result has been saved to the printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13810,32 +18381,53 @@ msgid "" "Only one of the results with the same name is saved. Are you sure you want " "to override the historical result?" msgstr "" -"There is already a previous calibration result with the same name: %s. Only " -"one result with a name is saved. Are you sure you want to overwrite the " -"previous result?" +"Il existe déjà un résultat d’étalonnage antérieur portant le même nom : %s. " +"Un seul des résultats portant le même nom est sauvegardé. Êtes-vous sûr de " +"vouloir remplacer le résultat antérieur ?" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." +"Ce type de machine ne peut contenir que %d résultats historiques par buse. " +"Ce résultat ne sera pas enregistré." + +msgid "Connecting to printer..." +msgstr "Connexion à l’imprimante…" + +msgid "The failed test result has been dropped." +msgstr "Le résultat du test ayant échoué a été supprimé." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" +"Le résultat de la calibration dynamique du débit a été enregistré sur " +"l’imprimante" msgid "Internal Error" -msgstr "Internal Error" +msgstr "Erreur interne" msgid "Please select at least one filament for calibration" -msgstr "Please select at least one filament for calibration" +msgstr "Veuillez sélectionner au moins un filament pour la calibration" -msgid "Flow rate calibration result has been saved to preset" -msgstr "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." +msgstr "" +"Le résultat de la calibration du débit a été enregistré dans le préréglage" -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "" +"Le résultat de la calibration de la vitesse volumétrique maximale a été " +"enregistré dans le préréglage" msgid "When do you need Flow Dynamics Calibration" -msgstr "When do you need Flow Dynamics Calibration" +msgstr "Nécessité de la calibration dynamique du débit" msgid "" "We now have added the auto-calibration for different filaments, which is " @@ -13843,21 +18435,13 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"We now have added the auto-calibration for different filaments, which is " -"fully automated and the result will be saved into the printer for future " -"use. You only need to do the calibration in the following limited cases:\n" -"1. If you introduce a new filament of different brands/models or the " -"filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" -"3. If the max volumetric speed or print temperature is changed in the " -"filament setting." msgid "About this calibration" -msgstr "About this calibration" +msgstr "À propos de cette calibration" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" @@ -13878,39 +18462,65 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"Vous trouverez les détails de l'étalonnage de la dynamique des débits dans " +"notre wiki.\n" +"\n" +"En général, la calibration n’est pas nécessaire. Lorsque vous démarrez une " +"impression mono-couleur/matériau, avec l’option « calibration de la " +"dynamique de flux » cochée dans le menu de démarrage de l’impression, " +"l’imprimante suivra l’ancienne méthode, en calibrant le filament avant " +"l’impression ; Lorsque vous démarrez une impression multi-couleur/matériau, " +"l’imprimante utilisera le paramètre de compensation par défaut pour le " +"filament lors de chaque changement de filament, ce qui donnera un bon " +"résultat dans la plupart des cas.\n" +"\n" +"Veuillez noter qu’il existe quelques cas qui peuvent rendre les résultats de " +"la calibration peu fiables, tels qu’une adhérence insuffisante sur le " +"plateau. Il est possible d’améliorer l’adhérence en lavant la plaque de " +"construction ou en appliquant de la colle. Pour plus d’informations à ce " +"sujet, veuillez consulter notre Wiki.\n" +"\n" +"Les résultats de la calibration présentent une fluctuation d’environ 10 % " +"dans notre test, ce qui peut entraîner une différence entre les résultats de " +"chaque calibration. Nous continuons d’étudier la cause première afin " +"d’apporter des améliorations lors des nouvelles mises à jour." msgid "When to use Flow Rate Calibration" -msgstr "When to use Flow Rate Calibration" +msgstr "Nécessité de la calibration du débit" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"Après avoir utilisé la calibration dynamique du débit, il peut encore y " +"avoir des problèmes d'extrusion, tels que :\n" +"1. Sur-extrusion : Excès de matière sur votre objet imprimé, formant des " +"gouttes ou des boutons, ou si les couches semblent plus épaisses que prévu " +"et non uniformes.\n" +"2. Sous-extrusion : Couches très fines, une faible solidité du remplissage " +"ou des espaces dans la couche supérieure du modèle, même si l'impression est " +"lente\n" +"3. Mauvaise qualité de surface : Si la surface de vos impressions semble " +"rugueuse ou inégale.\n" +"4. Faible intégrité structurelle : Impressions qui cassent facilement ou ne " +"semblent pas aussi solides qu'elles le devraient." msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" "PLA used in RC planes. These materials expand greatly when heated, and " "calibration provides a useful reference flow rate." msgstr "" -"In addition, Flow Rate Calibration is crucial for foaming materials like LW-" -"PLA used in RC planes. These materials expand greatly when heated, and " -"calibration provides a useful reference flow rate." +"De plus, la calibration du débit est cruciale pour les matériaux dotés de la " +"technologie de mousse active comme le LW-PLA utilisés dans les avions RC. " +"Ces matériaux se dilatent considérablement lorsqu'ils sont chauffés et la " +"calibration fournit un débit de référence utile." msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " @@ -13920,12 +18530,13 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"Flow Rate Calibration measures the ratio of expected to actual extrusion " -"volumes. The default setting works well in Bambu Lab printers and official " -"filaments as they were pre-calibrated and fine-tuned. For a regular " -"filament, you usually won't need to perform a Flow Rate Calibration unless " -"you still see the listed defects after you have done other calibrations. For " -"more details, please check out the wiki article." +"La calibration du débit mesure le ratio entre les volumes d’extrusion " +"attendus et réels. Le réglage par défaut fonctionne bien sur les imprimantes " +"Bambu Lab et les filaments officiels car ils ont été pré-calibrés et " +"affinés. Pour un filament ordinaire, vous n’aurez généralement pas besoin " +"d’effectuer une calibration du débit à moins que vous ne voyiez toujours les " +"défauts répertoriés après avoir effectué d’autres calibrations. Pour plus de " +"détails, veuillez consulter l’article du wiki." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -13945,315 +18556,378 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, have sparkles, or have a highly-reflective finish may not be " -"suitable for this calibration and can produce less-than-desirable results.\n" +"La calibration automatique du débit utilise la technologie Micro-Lidar de " +"Bambu Lab, mesurant directement les modèles de calibration. Cependant, " +"veuillez noter que l’efficacité et la précision de cette méthode peuvent " +"être compromises avec des types de matériaux spécifiques. En particulier, " +"les filaments qui sont transparents ou semi-transparents, à particules " +"scintillantes ou qui ont une finition hautement réfléchissante peuvent ne " +"pas convenir à cette calibration et peuvent produire des résultats moins que " +"souhaitables.\n" "\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" +"Les résultats d’étalonnage peuvent varier entre chaque calibration ou " +"filament. Nous améliorons toujours la précision et la compatibilité de cette " +"calibration grâce aux mises à jour du firmware au fil du temps.\n" "\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before doing it." +"Attention : la calibration du débit est un processus avancé, qui ne doit " +"être tenté que par ceux qui comprennent parfaitement son objectif et ses " +"implications. Une utilisation incorrecte peut entraîner des impressions de " +"qualité inférieure ou endommager l’imprimante. Assurez-vous de lire " +"attentivement et de comprendre le processus avant de le faire." msgid "When you need Max Volumetric Speed Calibration" -msgstr "When you need Max Volumetric Speed Calibration" +msgstr "Nécessité de la calibration de la vitesse volumétrique maximale" msgid "Over-extrusion or under extrusion" -msgstr "Over-extrusion or under extrusion" +msgstr "Sur-extrusion ou sous-extrusion" msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "Max Volumetric Speed calibration is recommended when you print with:" +msgstr "" +"La calibration de la vitesse volumétrique maximale est recommandée lorsque " +"vous imprimez avec :" msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "material with significant thermal shrinkage/expansion, such as..." +msgstr "un matériau avec un retrait/dilatation thermique important, tel que…" msgid "materials with inaccurate filament diameter" -msgstr "materials with inaccurate filament diameter" +msgstr "des matériaux avec un diamètre de filament imprécis" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "We found the best Flow Dynamics Calibration Factor" +msgstr "" +"Nous avons trouvé le meilleur facteur de calibration dynamique du débit" msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." msgstr "" -"Part of the calibration failed! You may clean the plate and retry. The " -"failed test result would be dropped." +"Une partie de la calibration a échoué ! Vous pouvez nettoyer le plateau et " +"réessayer. Le résultat du test échoué serai abandonné." msgid "" "*We recommend you to add brand, materia, type, and even humidity level in " "the Name" msgstr "" -"*We recommend you to add brand, materia, type, and even humidity level in " -"the Name" - -msgid "Failed" -msgstr "Failed" +"*Nous vous recommandons d’ajouter la marque, la matière, le type et même le " +"niveau d’humidité dans le nom" msgid "Please enter the name you want to save to printer." -msgstr "Please enter the name you want to save to printer." +msgstr "" +"Veuillez saisir le nom que vous souhaitez enregistrer sur l’imprimante." msgid "The name cannot exceed 40 characters." -msgstr "The name cannot exceed 40 characters." - -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to replace the other results?" +msgstr "Le nom ne peut pas dépasser 40 caractères." msgid "Please find the best line on your plate" -msgstr "Please find the best line on your plate" +msgstr "Veuillez trouver la meilleure ligne sur votre plateau" msgid "Please find the corner with perfect degree of extrusion" -msgstr "Please find the corner with the perfect degree of extrusion" +msgstr "Veuillez trouver l'angle avec le degré d'extrusion parfait" msgid "Input Value" -msgstr "Input Value" +msgstr "Valeur d’entrée" msgid "Save to Filament Preset" -msgstr "Save to Filament Preset" - -msgid "Preset" -msgstr "Preset" +msgstr "Enregistrer dans le préréglage du filament" msgid "Record Factor" -msgstr "Record Factor" +msgstr "Enregistrer le facteur" msgid "We found the best flow ratio for you" -msgstr "We found the best flow ratio for you" +msgstr "Nous avons trouvé le meilleur ratio de débit pour vous" msgid "Flow Ratio" -msgstr "Flow Ratio" +msgstr "Ratio du débit" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "Please input a valid value (0.0 < flow ratio < 2.0)" +msgstr "Veuillez saisir une valeur valide (0,0 < ratio du débit < 2,0)" msgid "Please enter the name of the preset you want to save." -msgstr "Please enter the name of the preset you want to save." +msgstr "Veuillez saisir le nom du préréglage que vous souhaitez enregistrer." msgid "Calibration1" -msgstr "Calibration1" +msgstr "Calibration 1" msgid "Calibration2" -msgstr "Calibration2" +msgstr "Calibration 2" msgid "Please find the best object on your plate" -msgstr "Please find the best object on your plate" +msgstr "Veuillez trouver le meilleur objet sur votre plateau" msgid "Fill in the value above the block with smoothest top surface" -msgstr "Fill in the value above the block with smoothest top surface" +msgstr "" +"Remplissez la valeur au-dessus du bloc avec la surface supérieure la plus " +"lisse" msgid "Skip Calibration2" -msgstr "Skip Calibration2" +msgstr "Ignorer la Calibration 2" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "flow ratio : %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "Please choose a block with smoothest top surface" +msgstr "ratio du débit : %s " msgid "Please choose a block with smoothest top surface." -msgstr "Please choose a block with smoothest top surface." +msgstr "Veuillez choisir un bloc avec la surface supérieure la plus lisse." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)" +msgstr "" +"Veuillez entrer une valeur valide (0 <= Vitesse volumétrique max <= 60)" msgid "Calibration Type" -msgstr "Calibration Type" +msgstr "Type de calibration" msgid "Complete Calibration" -msgstr "Complete Calibration" +msgstr "Calibration complète" msgid "Fine Calibration based on flow ratio" -msgstr "Fine Calibration based on flow ratio" +msgstr "Calibration précise basée sur le ratio du débit" msgid "Title" -msgstr "Title" +msgstr "Titre" msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"A test model will be printed. Please clear the build plate and place it back " -"to the hot bed before calibration." +"Un modèle de test sera imprimé. Veuillez nettoyer le plateau avant la " +"calibration." msgid "Printing Parameters" -msgstr "Printing Parameters" +msgstr "Paramètres d’impression" + +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" msgid "Plate Type" -msgstr "Plate Type" +msgstr "Type de plaque" msgid "filament position" -msgstr "filament position" - -msgid "External Spool" -msgstr "External Spool" +msgstr "position du filament" msgid "Filament For Calibration" -msgstr "Filament For Calibration" +msgstr "Filament pour la calibration" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" -"Tips for calibration material: \n" -"- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"Conseils pour le matériau de calibration :\n" +"- Matériaux pouvant partager la même température du plateau\n" +"- Différentes marques et familles de filaments (Marque = Bambu, Famille = " +"Basique, Mat)" msgid "Pattern" -msgstr "Pattern" +msgstr "Motif" msgid "Method" -msgstr "Method" +msgstr "Méthode" #, c-format, boost-format msgid "%s is not compatible with %s" -msgstr "%s is not compatible with %s" +msgstr "%s n’est pas compatible avec %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "TPU is not supported for Flow Dynamics Auto-Calibration." +msgstr "Le TPU n’est pas supporté pour la calibration dynamique du débit." -msgid "Connecting to printer" -msgstr "Connecting to printer" - -msgid "From k Value" -msgstr "From k Value" - -msgid "To k Value" -msgstr "To k Value" - -msgid "Step value" +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" msgstr "" +msgid "Sync AMS and nozzle information" +msgstr "" + +msgid "Connecting to printer" +msgstr "Connexion à l’imprimante" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + +msgid "From k Value" +msgstr "De la valeur K" + +msgid "To k Value" +msgstr "À la valeur K" + +msgid "Step value" +msgstr "Intervalle" + msgid "The nozzle diameter has been synchronized from the printer Settings" -msgstr "The nozzle diameter has been synchronized from the printer Settings" +msgstr "" +"Le diamètre de la buse a été synchronisé à partir des paramètres de " +"l’imprimante" msgid "From Volumetric Speed" -msgstr "From Volumetric Speed" +msgstr "Depuis la vitesse volumétrique" msgid "To Volumetric Speed" -msgstr "To Volumetric Speed" +msgstr "Vers la vitesse volumétrique" + +msgid "Are you sure you want to cancel this print?" +msgstr "Êtes-vous sûr de vouloir annuler cette impression ?" msgid "Flow Dynamics Calibration Result" -msgstr "Flow Dynamics Calibration Result" +msgstr "Résultat de la calibration dynamique du débit" msgid "New" -msgstr "New" +msgstr "Nouveau" msgid "No History Result" -msgstr "No History Result" +msgstr "Aucun historique" msgid "Success to get history result" -msgstr "Success to get history result" +msgstr "Aucun historique" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "Refreshing the previous Flow Dynamics Calibration records" +msgstr "Actualisation de historique des calibrations dynamiques du débit" msgid "Action" msgstr "Action" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" +"Ce type de machine ne peut contenir que %d résultats historiques par buse." msgid "Edit Flow Dynamics Calibration" -msgstr "Edit Flow Dynamics Calibration" +msgstr "Editer la calibration dynamique du débit" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "Nouveau calibrage dynamique du débit" msgid "Ok" msgstr "Ok" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "Le filament doit être sélectionné." + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" -msgstr "Network lookup" +msgstr "Recherche de réseau" msgid "Address" -msgstr "Address" +msgstr "Adresse" msgid "Hostname" -msgstr "Hostname" +msgstr "Nom d’hôte" msgid "Service name" -msgstr "Service name" +msgstr "Nom du service" msgid "OctoPrint version" -msgstr "OctoPrint version" +msgstr "Version OctoPrint" msgid "Searching for devices" -msgstr "Searching for devices" +msgstr "Recherche d’appareils" msgid "Finished" -msgstr "Finished" +msgstr "Terminé" msgid "Multiple resolved IP addresses" -msgstr "" +msgstr "Adresses IP à résolution multiple" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" +"Il existe plusieurs adresses IP résolues par le nom d’hôte %1%.\n" +"Veuillez en sélectionner une qui doit être utilisée." msgid "PA Calibration" -msgstr "PA Calibration" - -msgid "DDE" -msgstr "" - -msgid "Bowden" -msgstr "Bowden" +msgstr "Calibration Pressure Advance" msgid "Extruder type" -msgstr "" +msgstr "Type d'extrudeur" + +msgid "DDE" +msgstr "Direct Drive" msgid "PA Tower" -msgstr "PA Tower" +msgstr "Tour PA" msgid "PA Line" -msgstr "PA Line" +msgstr "Ligne PA" msgid "PA Pattern" -msgstr "PA Pattern" +msgstr "Motif PA" msgid "Start PA: " -msgstr "Start PA: " +msgstr "Début: " msgid "End PA: " -msgstr "End PA: " +msgstr "Fin: " msgid "PA step: " -msgstr "PA step: " +msgstr "Intervalle: " + +msgid "Accelerations: " +msgstr "Accélérations : " + +msgid "Speeds: " +msgstr "Vitesses : " msgid "Print numbers" -msgstr "Print numbers" +msgstr "Imprimer les numéros" + +msgid "Comma-separated list of printing accelerations" +msgstr "Liste d’accélérations d’impression séparées par des virgules" + +msgid "Comma-separated list of printing speeds" +msgstr "Liste de vitesses d’impression séparées par des virgules" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" -"Please input valid values:\n" -"Start PA: >= 0.0\n" -"End PA: > Start PA\n" -"PA step: >= 0.001)" +"Veuillez saisir des valeurs valides :\n" +"Début: >= 0.0\n" +"Fin: > Début\n" +"Intervalle: >= 0.001" msgid "Temperature calibration" -msgstr "Temperature calibration" +msgstr "Calibration de Température" + +msgid "Filament type" +msgstr "Filament" msgid "PLA" msgstr "PLA" @@ -14265,7 +18939,7 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" msgstr "TPU" @@ -14276,419 +18950,590 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filament type" - msgid "Start temp: " -msgstr "Start temp: " +msgstr "Temp. de début: " msgid "End temp: " -msgstr "End temp: " +msgstr "Temp. de fin: " msgid "Temp step: " -msgstr "Temp step: " +msgstr "Intervalle de temp. : " + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" -msgstr "Max volumetric speed test" +msgstr "Test de vitesse volumétrique max" msgid "Start volumetric speed: " -msgstr "Start volumetric speed: " +msgstr "Vitesse volumétrique de début: " msgid "End volumetric speed: " -msgstr "End volumetric speed: " +msgstr "Vitesse volumétrique de fin: " -msgid "step: " -msgstr "step: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" +"Veuillez saisir des valeurs valides :\n" +"Début > 0 \n" +"Intervalle >= 0\n" +"Fin > Début + Intervalle" msgid "VFA test" -msgstr "VFA test" +msgstr "Test VFA" msgid "Start speed: " -msgstr "Start speed: " +msgstr "Vitesse de début: " msgid "End speed: " -msgstr "End speed: " +msgstr "Vitesse de fin: " + +msgid "Wiki Guide: VFA" +msgstr "" msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" +"Veuillez saisir des valeurs valides :\n" +"Début > 10 \n" +"intervalles >= 0\n" +"Fin > Début + Intervalle" msgid "Start retraction length: " -msgstr "Start retraction length: " +msgstr "Longueur de rétraction de début: " msgid "End retraction length: " -msgstr "End retraction length: " +msgstr "Longueur de rétraction de fin: " -msgid "mm/mm" -msgstr "mm/mm" - -msgid "Send G-Code to printer host" +msgid "Wiki Guide: Retraction Calibration" msgstr "" -msgid "Upload to Printer Host with the following filename:" -msgstr "Upload to Printer Host with the following filename:" - -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Use forward slashes ( / ) as a directory separator if needed." - -msgid "Upload to storage" +msgid "Input shaping Frequency test" msgstr "" -msgid "Switch to Device tab after upload." +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" msgstr "" +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" +msgstr "Envoyer le G-code à l’imprimante" + +msgid "Upload to Printer Host with the following filename:" +msgstr "Envoyer vers l’imprimante avec le nom de fichier suivant :" + +msgid "Use forward slashes ( / ) as a directory separator if needed." +msgstr "" +"Utilisez des barres obliques ( / ) comme séparateur de répertoire si " +"nécessaire." + +msgid "Upload to storage" +msgstr "Envoyer vers le stockage" + +msgid "Switch to Device tab after upload." +msgstr "Passer à l’onglet Appareil après le téléchargement." + #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "Upload filename doesn't end with \"%s\". Do you wish to continue?" +msgstr "" +"Le nom du fichier envoyé ne se termine pas par \"%s\". Souhaitez-vous " +"continuer ?" msgid "Upload" -msgstr "Upload" +msgstr "Envoyer" msgid "Print host upload queue" -msgstr "Print host upload queue" +msgstr "File d’attente d’envoi de l’hôte d’impression" msgid "ID" msgstr "ID" msgid "Progress" -msgstr "Progress" +msgstr "Progression" msgid "Host" -msgstr "Host" +msgstr "Hôte" msgctxt "OfFile" msgid "Size" -msgstr "Size" +msgstr "Taille" msgid "Filename" -msgstr "Filename" +msgstr "Nom de fichier" msgid "Cancel selected" -msgstr "Cancel selected" +msgstr "Annuler la sélection" msgid "Show error message" -msgstr "Show error message" +msgstr "Afficher le message d’erreur" -msgid "Enqueued" -msgstr "Queued" +msgid "Queued" +msgstr "En file d’attente" msgid "Uploading" -msgstr "Uploading" +msgstr "Téléversement" -msgid "Cancelling" -msgstr "Cancelling" +msgid "Canceling" +msgstr "Annulation" msgid "Error uploading to print host" +msgstr "Erreur lors de l’envoi vers l’hôte d’impression" + +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." msgstr "" +"Le type de plateau sélectionné ne correspond pas au fichier. Veuillez " +"confirmer avant de lancer l’impression." + +msgid "Time-lapse" +msgstr "Timelapse" + +msgid "Heated Bed Leveling" +msgstr "Mise à niveau du plateau chauffant" + +msgid "Textured Build Plate (Side A)" +msgstr "Plateau texturé (côté A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Plateau texturé (côté B)" msgid "Unable to perform boolean operation on selected parts" -msgstr "Unable to perform boolean operation on selected parts" +msgstr "" +"Impossible d’effectuer une opération booléenne sur les pièces sélectionnées" msgid "Mesh Boolean" -msgstr "Mesh Boolean" +msgstr "Opérations booléennes" msgid "Union" -msgstr "Union" +msgstr "Fusion" msgid "Difference" -msgstr "Difference" +msgstr "Soustraction" msgid "Intersection" msgstr "Intersection" msgid "Source Volume" -msgstr "Source Volume" +msgstr "Volume d’origine" msgid "Tool Volume" -msgstr "Tool Volume" +msgstr "Volume d’outil" msgid "Subtract from" -msgstr "Subtract from" +msgstr "Soustraire de" msgid "Subtract with" -msgstr "Subtract with" +msgstr "Soustraire avec" msgid "selected" -msgstr "selected" +msgstr "sélectionné" msgid "Part 1" -msgstr "Part 1" +msgstr "Partie 1" msgid "Part 2" -msgstr "Part 2" +msgstr "Partie 2" msgid "Delete input" -msgstr "Delete input" +msgstr "Supprimer l’objet" msgid "Network Test" -msgstr "Network Test" +msgstr "Test du réseau" msgid "Start Test Multi-Thread" -msgstr "Start Test Multi-Thread" +msgstr "Démarrer le test multithread" msgid "Start Test Single-Thread" -msgstr "Start Test Single-Thread" +msgstr "Démarrer le test Single-Thread" msgid "Export Log" -msgstr "Export Log" +msgstr "Exportation du journal" msgid "Snapmaker Orca Version:" -msgstr "" +msgstr "Version d’Snapmaker Orca:" msgid "System Version:" -msgstr "System Version:" +msgstr "Version du système :" msgid "DNS Server:" -msgstr "DNS Server:" +msgstr "Serveur DNS :" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Snapmaker Orca Test (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Snapmaker Orca Test (GitHub) :" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "Test bing.com" msgid "Test bing.com:" -msgstr "Test bing.com:" +msgstr "Test bing.com :" msgid "Log Info" -msgstr "Log Info" +msgstr "Journal de bord" msgid "Select filament preset" -msgstr "Select filament preset" +msgstr "Sélection du préréglage du filament" msgid "Create Filament" -msgstr "Create Filament" +msgstr "Création d’un filament" msgid "Create Based on Current Filament" -msgstr "Create Based on Current Filament" +msgstr "Créer en fonction du filament actuel" msgid "Copy Current Filament Preset " -msgstr "Copy Current Filament Preset " +msgstr "Copier le préréglage actuel du filament " msgid "Basic Information" -msgstr "Basic Information" +msgstr "Informations de base" msgid "Add Filament Preset under this filament" -msgstr "Add Filament Preset under this filament" +msgstr "Ajouter un préréglage de filament sous ce filament" msgid "We could create the filament presets for your following printer:" -msgstr "We could create the filament presets for your following printer:" +msgstr "" +"Nous pourrions créer les préréglages de filaments pour votre imprimante " +"suivante :" msgid "Select Vendor" -msgstr "Select Vendor" +msgstr "Sélectionner le fournisseur" msgid "Input Custom Vendor" -msgstr "Input Custom Vendor" +msgstr "Saisir le fournisseur personnalisé" msgid "Can't find vendor I want" -msgstr "Can't find vendor I want" +msgstr "Je ne trouve pas le vendeur que je souhaite" msgid "Select Type" -msgstr "Select Type" +msgstr "Sélectionner le type" msgid "Select Filament Preset" -msgstr "Select Filament Preset" +msgstr "Sélectionner le préréglage du filament" msgid "Serial" -msgstr "Serial" +msgstr "Numéro de série" msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "e.g. Basic, Matte, Silk, Marble" +msgstr "par exemple : Basic, Matte, Silk, Marble" msgid "Filament Preset" -msgstr "Filament Preset" +msgstr "Préréglage du filament" msgid "Create" -msgstr "Create" +msgstr "Créer" msgid "Vendor is not selected, please reselect vendor." -msgstr "Vendor is not selected; please reselect vendor." +msgstr "" +"Le fournisseur n’est pas sélectionné, veuillez le sélectionner à nouveau." msgid "Custom vendor is not input, please input custom vendor." -msgstr "Custom vendor missing; please input custom vendor." +msgstr "" +"Le fournisseur personnalisé n’est pas saisi, veuillez saisir le fournisseur " +"personnalisé." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"« Bambu » ou « Générique » ne peuvent pas être utilisés comme fournisseur de " +"filaments personnalisés." msgid "Filament type is not selected, please reselect type." -msgstr "Filament type is not selected, please reselect type." +msgstr "" +"Le type de filament n’est pas sélectionné, veuillez resélectionner le type." -msgid "Filament serial is not inputed, please input serial." -msgstr "Filament serial missing; please input serial." +msgid "Filament serial is not entered, please enter serial." +msgstr "" +"Le numéro de série du filament n’est pas saisi, veuillez saisir le numéro de " +"série." msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." msgstr "" -"There may be disallowed characters in the vendor or serial input of the " -"filament. Please delete and re-enter." +"Il peut y avoir des caractères d’échappement dans l’entrée du fournisseur ou " +"du numéro de série du filament. Veuillez les supprimer et les saisir à " +"nouveau." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." -msgstr "All inputs in the custom vendor or serial are spaces. Please re-enter." +msgstr "" +"Toutes les entrées dans le vendeur ou le numéro de série personnalisé sont " +"des espaces. Veuillez les saisir à nouveau." -msgid "The vendor can not be a number. Please re-enter." -msgstr "The vendor can not be a number; please re-enter." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "Le vendeur ne peut pas être un numéro. Veuillez le saisir à nouveau." msgid "" "You have not selected a printer or preset yet. Please select at least one." msgstr "" -"You have not selected a printer or preset yet. Please select at least one." +"Vous n’avez pas encore sélectionné d’imprimante ou de préréglage. Veuillez " +"en sélectionner au moins un." #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"The Filament name %s you created already exists. \n" -"If you continue, the preset created will be displayed with its full name. Do " -"you want to continue?" +"Le nom de filament %s que vous avez créé existe déjà.\n" +"Si vous continuez la création, le réglage créé sera affiché avec son nom " +"complet. Voulez-vous continuer ?" msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "Some existing presets have failed to be created, as follows:\n" +msgstr "Certains préréglages existants n’ont pas été créés, comme suit :\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" -"Do you want to rewrite it?" +"Voulez-vous le réécrire ?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" +"Nous renommerions les préréglages en « Vendor Type Serial @printer you " +"selected ».\n" +"Pour ajouter des préréglages pour d’autres imprimantes, veuillez aller à la " +"sélection de l’imprimante" msgid "Create Printer/Nozzle" -msgstr "Create Printer/Nozzle" +msgstr "Créer une imprimante/buse" msgid "Create Printer" -msgstr "Create Printer" +msgstr "Créer une imprimante" msgid "Create Nozzle for Existing Printer" -msgstr "Create Nozzle for Existing Printer" +msgstr "Créer une buse pour une imprimante existante" msgid "Create from Template" -msgstr "Create from Template" +msgstr "Créer depuis un modèle" msgid "Create Based on Current Printer" -msgstr "Create Based on Current Printer" +msgstr "Créer en fonction de l’imprimante actuelle" msgid "Import Preset" -msgstr "Import Preset" +msgstr "Importer un préréglage" msgid "Create Type" -msgstr "Create Type" +msgstr "Créer un type" -msgid "The model is not found, place reselect vendor." -msgstr "The model was not found; please reselect vendor." - -msgid "Select Model" -msgstr "Select Model" +msgid "The model was not found, please reselect vendor." +msgstr "Le modèle n’est pas trouvé, il faut resélectionner le fournisseur." msgid "Select Printer" -msgstr "Select Printer" +msgstr "Sélectionner l’imprimante" + +msgid "Select Model" +msgstr "Sélectionner le modèle" msgid "Input Custom Model" -msgstr "Input Custom Model" +msgstr "Entrée du modèle personnalisé" msgid "Can't find my printer model" -msgstr "Can't find my printer model" +msgstr "Impossible de trouver le modèle de mon imprimante" + +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" msgid "Rectangle" msgstr "Rectangle" msgid "Printable Space" -msgstr "Printable Space" +msgstr "Espace imprimable" msgid "Hot Bed STL" -msgstr "Hot Bed STL" - -msgid "Load stl" -msgstr "Load stl" +msgstr "STL du plateau" msgid "Hot Bed SVG" -msgstr "Hot Bed SVG" - -msgid "Load svg" -msgstr "Load svg" +msgstr "SVG du plateau" msgid "Max Print Height" -msgstr "Max Print Height" +msgstr "Hauteur d’impression maximale" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." -msgstr "The file exceeds %d MB, please import again." +msgstr "Le fichier dépasse %d MB, veuillez réimporter." msgid "Exception in obtaining file size, please import again." -msgstr "Exception in obtaining file size, please import again." +msgstr "" +"Exception dans l’obtention de la taille du fichier, veuillez importer à " +"nouveau." -msgid "Preset path is not find, please reselect vendor." -msgstr "Preset path was not found; please reselect vendor." +msgid "Preset path was not found, please reselect vendor." +msgstr "" +"Le chemin d’accès prédéfini n’est pas trouvé, veuillez resélectionner le " +"vendeur." msgid "The printer model was not found, please reselect." -msgstr "The printer model was not found, please reselect." +msgstr "Le modèle d’imprimante n’a pas été trouvé, veuillez resélectionner." -msgid "The nozzle diameter is not found, place reselect." -msgstr "The nozzle diameter was not found; please reselect." +msgid "The nozzle diameter was not found, please reselect." +msgstr "Le diamètre de la buse n’est pas bon, resélectionner l’emplacement." -msgid "The printer preset is not found, place reselect." -msgstr "The printer preset was not found; please reselect." +msgid "The printer preset was not found, please reselect." +msgstr "Le préréglage de l’imprimante n’est pas bon, placez le préréglage." msgid "Printer Preset" -msgstr "Printer Preset" +msgstr "Préréglage de l’imprimante" msgid "Filament Preset Template" -msgstr "Filament Preset Template" +msgstr "Modèle de préréglage Filament" msgid "Deselect All" -msgstr "Deselect All" +msgstr "Désélectionner tout" msgid "Process Preset Template" -msgstr "Process Preset Template" - -msgid "Back Page 1" -msgstr "Back Page 1" +msgstr "Modèle de préréglage de traitement" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"You have not yet chosen which printer preset to create based on. Please " -"choose the vendor and model of the printer" +"Vous n’avez pas encore choisi le préréglage de l’imprimante sur lequel " +"créer. Veuillez choisir le fournisseur et le modèle de l’imprimante" msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." msgstr "" -"You have entered a disallowed character in the printable area section on the " -"first page. Please use only numbers." - -msgid "The custom printer or model is not inputed, place input." -msgstr "The custom printer or model missing; please input." +"Vous avez introduit une donnée illégale dans la section « zone imprimable » " +"de la première page. Veuillez vérifier avant de la créer." msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -14699,74 +19544,88 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" -"The printer preset you created already has a preset with the same name. Do " -"you want to overwrite it?\n" -"\tYes: Overwrite the printer preset with the same name, and filament and " -"process presets with the same preset name will be recreated \n" -"and filament and process presets without the same preset name will be " -"reserved.\n" -"\tCancel: Do not create a preset; return to the creation interface." +"Le préréglage d’imprimante que vous avez créé possède déjà un préréglage " +"portant le même nom. Voulez-vous l’écraser ?\n" +"\tOui : écraser le préréglage d’imprimante portant le même nom, et les " +"préréglages de filament et de traitement portant le même nom de préréglage " +"seront recréés.\n" +"et les préréglages de filament et de processus sans le même nom de " +"préréglage seront réservés.\n" +"\tAnnuler : Ne pas créer de préréglage, revenir à l’interface de création." msgid "You need to select at least one filament preset." -msgstr "You need to select at least one filament preset." +msgstr "Vous devez sélectionner au moins un préréglage de filament." msgid "You need to select at least one process preset." -msgstr "You need to select at least one process preset." +msgstr "Vous devez sélectionner au moins un préréglage de filament." msgid "Create filament presets failed. As follows:\n" -msgstr "Create filament presets failed. As follows:\n" +msgstr "La création de préréglages de filaments a échoué. Comme suit :\n" msgid "Create process presets failed. As follows:\n" -msgstr "Create process presets failed. As follows:\n" +msgstr "La création de préréglages de traitement a échoué. Comme suit :\n" -msgid "Vendor is not find, please reselect." -msgstr "Vendor was not found; please reselect." +msgid "Vendor was not found, please reselect." +msgstr "Le vendeur n’est pas trouvé, veuillez resélectionner." msgid "Current vendor has no models, please reselect." -msgstr "Current vendor has no models, please reselect." +msgstr "Le vendeur actuel n’a pas de modèle, veuillez resélectionner." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"You have not selected the vendor and model or input the custom vendor and " -"model." +"Vous n’avez pas sélectionné le fournisseur et le modèle ou introduit le " +"fournisseur et le modèle personnalisés." msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." msgstr "" -"There may be escape characters in the custom printer vendor or model. Please " -"delete and re-enter." +"Il peut y avoir des caractères d’échappement dans le fournisseur ou le " +"modèle de l’imprimante personnalisée. Veuillez les supprimer et les saisir à " +"nouveau." msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"All inputs in the custom printer vendor or model are spaces. Please re-enter." +"Toutes les entrées dans le modèle ou le fournisseur de l’imprimante " +"personnalisée sont des espaces. Veuillez les saisir à nouveau." msgid "Please check bed printable shape and origin input." -msgstr "Please check bed printable shape and origin input." +msgstr "" +"Veuillez vérifier la forme imprimable du plateau et l’entrée de l’origine." msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -"You have not yet selected the printer to replace the nozzle for; please " -"choose a printer." +"Vous n’avez pas encore sélectionné l’imprimante pour remplacer la buse, " +"veuillez choisir." -msgid "Create Printer Successful" -msgstr "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" -msgid "Create Filament Successful" -msgstr "Filament Created Successfully" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "Création d’une imprimante réussie" + +msgid "Filament Created Successfully" +msgstr "Créer un filament réussi" msgid "Printer Created" -msgstr "Printer Created" +msgstr "Imprimante créée" msgid "Please go to printer settings to edit your presets" -msgstr "Please go to printer settings to edit your presets" +msgstr "" +"Veuillez aller dans les paramètres de l’imprimante pour modifier vos " +"préréglages" msgid "Filament Created" -msgstr "Filament Created" +msgstr "Filament créé" msgid "" "Please go to filament setting to edit your presets if you need.\n" @@ -14774,55 +19633,63 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Please go to filament settings to edit your presets if you need to.\n" -"Please note that nozzle temperature, hot bed temperature, and maximum " -"volumetric speed each have a significant impact on printing quality. Please " -"set them carefully." +"Si vous le souhaitez, vous pouvez modifier vos préréglages dans les " +"paramètres du filament.\n" +"Veuillez noter que la température de la buse, la température du plateau " +"chaud et la vitesse volumétrique maximale ont un impact significatif sur la " +"qualité d’impression. Veuillez les régler avec soin." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" +"\n" +"\n" +"Studio a détecté que la fonction de synchronisation des réglages utilisateur " +"n’est pas activée, ce qui peut entraîner l’échec des réglages du filament " +"sur la page Device.\n" +"Cliquez sur «  Synchroniser les réglages prédéfinis de l’utilisateur «  pour " +"activer la fonction de synchronisation." msgid "Printer Setting" -msgstr "Printer Setting" +msgstr "Réglage de l’imprimante" msgid "Printer config bundle(.orca_printer)" -msgstr "" +msgstr "Paquet de configuration de l’imprimante (.orca_printer)" msgid "Filament bundle(.orca_filament)" -msgstr "" +msgstr "Paquet de filaments (.orca_filament)" msgid "Printer presets(.zip)" -msgstr "Printer presets(.zip)" +msgstr "Préréglages d’imprimante(.zip)" msgid "Filament presets(.zip)" -msgstr "Filament presets(.zip)" +msgstr "Présélections de filaments(.zip)" msgid "Process presets(.zip)" -msgstr "Process presets(.zip)" +msgstr "Présélections de traitement(.zip)" msgid "initialize fail" -msgstr "initialize fail" +msgstr "échec de l’initialisation" msgid "add file fail" -msgstr "add file fail" +msgstr "échec de l’ajout d’un fichier" msgid "add bundle structure file fail" -msgstr "add bundle structure file fail" +msgstr "échec de l’ajout d’un fichier de structure de paquet" msgid "finalize fail" -msgstr "finalize fail" +msgstr "échec de la finalisation" msgid "open zip written fail" -msgstr "open zip written fail" +msgstr "échec de l’ouverture d’un zip écrit" msgid "Export successful" -msgstr "Export successful" +msgstr "Exportation réussie" #, c-format, boost-format msgid "" @@ -14831,340 +19698,415 @@ msgid "" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" -"The '%s' folder already exists in the current directory. Do you want to " -"clear it and rebuild it?\n" -"If not, a time suffix will be added, and you can modify the name after " -"creation." +"Le dossier ‘%s’ existe déjà dans le répertoire actuel. Voulez-vous l’effacer " +"et le reconstruire ?\n" +"Si ce n’est pas le cas, un suffixe temporel sera ajouté, et vous pourrez " +"modifier le nom après la création." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" -"Can be shared with others." +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." msgstr "" msgid "" -"User's fillment preset set. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"User's fillment preset set. \n" +"Imprimante et tous les préréglages de filament et de traitement qui " +"appartiennent à l’imprimante.\n" +"Peut être partagé avec d’autres." + +msgid "" +"User's filament preset set.\n" "Can be shared with others." +msgstr "" +"Préréglage du remplissage par l’utilisateur.\n" +"Peut être partagé avec d’autres." msgid "" "Only display printer names with changes to printer, filament, and process " "presets." msgstr "" -"Only display printers with changes to printer, filament, and process presets " -"are displayed." +"N’afficher que les noms d’imprimantes avec les modifications apportées aux " +"préréglages de l’imprimante, du filament et du traitement." msgid "Only display the filament names with changes to filament presets." -msgstr "Only display the filament names with changes to filament presets." +msgstr "" +"N’affichez que les noms des filaments lorsque vous modifiez les préréglages " +"des filaments." msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Only printer names with user printer presets will be displayed, and each " -"preset you choose will be exported as a zip." +"Seuls les noms d’imprimantes avec des préréglages d’imprimante utilisateur " +"seront affichés, et chaque préréglage que vous choisissez sera exporté sous " +"forme de fichier zip." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" -"Only the filament names with user filament presets will be displayed, \n" -"and all user filament presets in each filament name you select will be " -"exported as a zip." +"Seuls les noms de filaments contenant des préréglages de filaments " +"utilisateur seront affichés, \n" +"et tous les préréglages de filament d’utilisateur dans chaque nom de " +"filament que vous sélectionnez seront exportés sous forme de fichier zip." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" -"Only printer names with changed process presets will be displayed, \n" -"and all user process presets in each printer name you select will be " -"exported as a zip." +"Seuls les noms d’imprimantes dont les préréglages de traitement ont été " +"modifiés seront affichés, \n" +"et tous les préréglages de processus de l’utilisateur dans chaque nom " +"d’imprimante que vous sélectionnez seront exportés sous forme de fichier zip." msgid "Please select at least one printer or filament." -msgstr "Please select at least one printer or filament." +msgstr "Veuillez sélectionner au moins une imprimante ou un filament." msgid "Please select a type you want to export" -msgstr "Please select a preset type you want to export" +msgstr "Veuillez sélectionner le type de produit que vous souhaitez exporter" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" +"Échec de la création d’un dossier temporaire, veuillez réessayer d’exporter " +"les configurations." msgid "Edit Filament" -msgstr "Edit Filament" +msgstr "Modifier le filament" msgid "Filament presets under this filament" -msgstr "Filament presets under this filament" +msgstr "Préréglages du filament sous ce filament" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Note: If the only preset under this filament is deleted, the filament will " -"be deleted after exiting the dialog." +"Remarque : si le seul préréglage sous ce filament est supprimé, le filament " +"sera supprimé après avoir quitté la boîte de dialogue." -msgid "Presets inherited by other presets can not be deleted" -msgstr "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" +"Les préréglages hérités d’autres préréglages ne peuvent pas être supprimés" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "" -msgstr[1] "" +msgstr[0] "Les préréglages suivants héritent de ce préréglage." +msgstr[1] "Le préréglage suivant hérite de ce préréglage." msgid "Delete Preset" -msgstr "Delete Preset" +msgstr "Supprimer la présélection" + +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Êtes-vous sûr de vouloir supprimer le préréglage sélectionné ?\n" +"Si le préréglage correspond à un filament actuellement utilisé sur votre " +"imprimante, veuillez réinitialiser les informations sur le filament pour cet " +"emplacement." msgid "Are you sure to delete the selected preset?" -msgstr "Are you sure to delete the selected preset?" +msgstr "Êtes-vous sûr de vouloir supprimer le préréglage sélectionné ?" msgid "Delete preset" -msgstr "Delete preset" +msgstr "Effacer la présélection" msgid "+ Add Preset" -msgstr "+ Add Preset" - -msgid "Delete Filament" -msgstr "Delete Filament" +msgstr "+ Ajouter un préréglage" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"All the filament presets belong to this filament would be deleted. \n" -"If you are using this filament on your printer, please reset the filament " -"information for that slot." +"Tous les préréglages de filaments appartenant à ce filament seront " +"supprimés.\n" +"Si vous utilisez ce filament sur votre imprimante, veuillez réinitialiser " +"les informations relatives au filament pour cet emplacement." msgid "Delete filament" -msgstr "Delete filament" +msgstr "Supprimer le filament" msgid "Add Preset" -msgstr "Add Preset" +msgstr "Ajouter un préréglage" msgid "Add preset for new printer" -msgstr "Add preset for new printer" +msgstr "Ajouter un préréglage pour une nouvelle imprimante" msgid "Copy preset from filament" -msgstr "Copy preset from filament" +msgstr "Copier le préréglage du filament" msgid "The filament choice not find filament preset, please reselect it" -msgstr "The filament choice not find filament preset, please reselect it" +msgstr "" +"Le choix du filament ne correspond pas à la présélection du filament, " +"veuillez le resélectionner" msgid "[Delete Required]" -msgstr "[Delete Required]" +msgstr "[Suppression requise]" msgid "Edit Preset" -msgstr "Edit Preset" +msgstr "Modifier le préréglage" msgid "For more information, please check out Wiki" -msgstr "For more information, please check out our Wiki" +msgstr "Pour plus d’informations, consultez le site Wiki" msgid "Collapse" -msgstr "Collapse" +msgstr "Réduire" msgid "Daily Tips" -msgstr "Daily Tips" +msgstr "Astuces quotidiennes" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "nozzle memorized: %.1f %s" +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"Your nozzle diameter in preset is not consistent with the saved nozzle " -"diameter. Have you changed your nozzle?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" -msgstr "Need select printer" +msgstr "Nécessité de sélectionner une imprimante" msgid "The start, end or step is not valid value." -msgstr "The start, end or step is not valid value." +msgstr "Le début, la fin ou l’intervalle n’est pas une valeur valide." + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" -"Unable to calibrate: maybe because the set calibration value range is too " -"large, or the step is too small" +"Impossible de calibrer : il est possible que la plage de valeurs de " +"calibrage définie est trop grande ou que l’intervalle est trop petit" -#, fuzzy msgid "Physical Printer" -msgstr "Printer" +msgstr "Imprimante Physique" msgid "Print Host upload" -msgstr "Print Host upload" +msgstr "Envoi vers l’imprimante hôte" msgid "Could not get a valid Printer Host reference" -msgstr "Could not get a valid Printer Host reference" +msgstr "Impossible d’obtenir une référence d’imprimante hôte valide" msgid "Success!" -msgstr "Success!" +msgstr "Succès !" msgid "Are you sure to log out?" -msgstr "" - -msgid "Refresh Printers" -msgstr "Refresh Printers" +msgstr "Êtes-vous sûr de pouvoir vous déconnecter ?" msgid "View print host webui in Device tab" msgstr "" +"Afficher l’interface web de l’hôte d’impression dans l’onglet Périphérique" msgid "Replace the BambuLab's device tab with print host webui" -msgstr "" +msgstr "Remplacer l’onglet device de BambuLab par print host webui" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." +"Le fichier CA HTTPS est facultatif. Il n'est nécessaire que si vous utilisez " +"HTTPS avec un certificat auto-signé." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "" +"Fichiers de certificat (*.crt, *.pem)|*.crt;*.pem|Tous les fichiers|*.*" msgid "Open CA certificate file" -msgstr "Open CA certificate file" +msgstr "Ouvrir le fichier de certificat CA" #, c-format, boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"On this system, %s uses HTTPS certificates from the system Certificate Store " -"or Keychain." +"Sur ce système, %s utilise les certificats HTTPS du magasin de certificats " +"du système ou du trousseau." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"To use a custom CA file, please import your CA file into Certificate Store / " -"Keychain." +"Pour utiliser un certificat personnalisé, veuillez importer votre fichier " +"dans magasin de certificats / trousseau." msgid "Login/Test" -msgstr "" +msgstr "Connexion/Test" msgid "Connection to printers connected via the print host failed." -msgstr "Connection to printers connected via the print host failed." +msgstr "" +"La connexion aux imprimantes connectées via l’hôte d’impression a échoué." #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "Mismatched type of print host: %s" +msgstr "Type d’hôte d’impression non compatible : %s" -msgid "Connection to AstroBox works correctly." -msgstr "Connection to AstroBox is working correctly." +msgid "Connection to AstroBox is working correctly." +msgstr "La connexion à l’AstroBox fonctionne correctement." msgid "Could not connect to AstroBox" -msgstr "Could not connect to AstroBox" +msgstr "Impossible de se connecter à AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Note: AstroBox version 1.1.0 or higher is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "Note : La version 1.1.0 d’AstroBox est requise." -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet is working correctly." +msgid "Connection to Duet is working correctly." +msgstr "La connexion à Duet fonctionne correctement." msgid "Could not connect to Duet" -msgstr "Could not connect to Duet" +msgstr "Impossible de se connecter à Duet" -msgid "Unknown error occured" -msgstr "Unknown error occured" +msgid "Unknown error occurred" +msgstr "Une erreur inconnue s’est produite" msgid "Wrong password" -msgstr "Wrong password" +msgstr "Mot de passe erroné" msgid "Could not get resources to create a new connection" -msgstr "Could not get resources to create a new connection" +msgstr "Impossible d’obtenir des ressources pour créer une nouvelle connexion" msgid "Upload not enabled on FlashAir card." -msgstr "Upload not enabled on FlashAir card." +msgstr "Le téléchargement n’est pas activé sur la carte FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "Connection to FlashAir is working correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "" +"La connexion à FlashAir fonctionne correctement et le téléchargement est " +"activé." msgid "Could not connect to FlashAir" -msgstr "Could not connect to FlashAir" +msgstr "Impossible de se connecter à FlashAir" msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " -"is required." +"Note : FlashAir avec le firmware 2.00.02 ou plus récent et la fonction de " +"téléchargement activée sont nécessaires." -msgid "Connection to MKS works correctly." -msgstr "Connection to MKS is working correctly." +msgid "Connection to MKS is working correctly." +msgstr "La connexion à MKS fonctionne correctement." msgid "Could not connect to MKS" -msgstr "Could not connect to MKS" +msgstr "Impossible de se connecter à MKS" -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint is working correctly." +msgid "Connection to OctoPrint is working correctly." +msgstr "La connexion à OctoPrint fonctionne correctement." msgid "Could not connect to OctoPrint" -msgstr "Could not connect to OctoPrint" +msgstr "Impossible de se connecter à OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version 1.1.0 or higher is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "Note : La version 1.1.0 d’OctoPrint est requise." -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Connection to Prusa SL1 / SL1S is working correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "La connexion à Prusa SL1 / SL1S fonctionne correctement." msgid "Could not connect to Prusa SLA" -msgstr "Could not connect to Prusa SLA" +msgstr "Impossible de se connecter à Prusa SLA" -msgid "Connection to PrusaLink works correctly." -msgstr "Connection to PrusaLink is working correctly." +msgid "Connection to PrusaLink is working correctly." +msgstr "La connexion à PrusaLink fonctionne correctement." msgid "Could not connect to PrusaLink" -msgstr "Could not connect to PrusaLink" +msgstr "Impossible de se connecter à PrusaLink" msgid "Storages found" -msgstr "" +msgstr "Stockages trouvés" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" -msgstr "" +msgstr "%1% : lecture seule" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" -msgstr "" +msgstr "%1% : pas d’espace libre" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" +"Le téléchargement a échoué. Aucun espace de stockage approprié n’a été " +"trouvé à %1%." -msgid "Connection to Prusa Connect works correctly." -msgstr "" +msgid "Connection to Prusa Connect is working correctly." +msgstr "La connexion à Prusa Connect fonctionne correctement." msgid "Could not connect to Prusa Connect" -msgstr "" +msgstr "Impossible de se connecter à Prusa Connect" -msgid "Connection to Repetier works correctly." -msgstr "Connection to Repetier is working correctly." +msgid "Connection to Repetier is working correctly." +msgstr "La connexion à Repetier fonctionne correctement." msgid "Could not connect to Repetier" -msgstr "Could not connect to Repetier" +msgstr "Impossible de se connecter à Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Note: Repetier version 0.90.0 or higher is required." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "Note : La version 0.90.0 de Repetier est requise." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" +"Statut HTTP : %1%\n" +"Corps du message : « %2% »" #, boost-format msgid "" @@ -15172,9 +20114,9 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Parsing of host response failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" +"L’analyse de la réponse de l’hôte a échoué.\n" +"Corps du message : « %1% »\n" +"Erreur : « %2% »" #, boost-format msgid "" @@ -15182,298 +20124,722 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Enumeration of host printers failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" +"L’énumération des imprimantes hôtes a échoué.\n" +"Corps du message : « %1% »\n" +"Erreur : « %2% »" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." +"Sa faible hauteur de couche permet d’obtenir des lignes de couche presque " +"négligeables et une grande qualité d’impression. Il convient à la plupart " +"des cas d’impression générale." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,2 mm, la vitesse et " +"l’accélération sont plus faibles, et le motif de remplissage épars est " +"gyroïde. Il en résulte donc une qualité d’impression nettement supérieure, " +"mais un temps d’impression beaucoup plus long." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,2 mm, il présente une " +"hauteur de couche légèrement supérieure, ce qui se traduit par des lignes de " +"couche presque négligeables et un temps d’impression légèrement plus court." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,2 mm, il présente une " +"hauteur de couche plus importante, ce qui se traduit par des lignes de " +"couche légèrement visibles, mais un temps d’impression plus court." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." +"Par rapport au profil par défaut d’une buse de 0,2 mm, il présente des " +"lignes de couche plus petites, des vitesses et des accélérations plus " +"faibles, et le motif de remplissage clairsemé est gyroïde. Il en résulte " +"donc des lignes de couche presque invisibles et une qualité d’impression " +"bien supérieure, mais un temps d’impression bien plus long." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,2 mm, il présente des " +"lignes de couche plus petites, des vitesses et des accélérations plus " +"faibles, et le motif de remplissage clairsemé est gyroïde. Il en résulte " +"donc des lignes de couche minimales et une qualité d’impression nettement " +"supérieure, mais un temps d’impression beaucoup plus long." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" +"Il présente une hauteur de couche générale, ce qui se traduit par des lignes " +"de couche et une qualité d’impression générales. Il convient à la plupart " +"des cas d’impression générale." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente plus de " +"boucles de paroi et une densité de remplissage clairsemée plus élevée. Il en " +"résulte donc une plus grande solidité des impressions, mais une plus grande " +"consommation de filament et un temps d’impression plus long." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus importante, ce qui se traduit par des lignes de " +"couche plus apparentes et une qualité d’impression moindre, mais un temps " +"d’impression légèrement plus court." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus importante, ce qui se traduit par des lignes de " +"couche plus apparentes et une qualité d’impression moindre, mais un temps " +"d’impression plus court." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +"moins apparentes et une meilleure qualité d’impression, mais un temps " +"d’impression plus long." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus petite, des vitesses et des accélérations plus " +"faibles, et le motif de remplissage clairsemé est gyroïde. Il en résulte " +"donc des lignes de couche moins apparentes et une qualité d’impression " +"beaucoup plus élevée, mais un temps d’impression beaucoup plus long." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus petite, ce qui permet d’obtenir des lignes de couche " +"presque négligeables et une meilleure qualité d’impression, mais un temps " +"d’impression plus long." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus petite, des vitesses et des accélérations plus " +"faibles, et le motif de remplissage clairsemé est gyroïde. Il en résulte " +"donc des lignes de couche presque négligeables et une qualité d’impression " +"bien supérieure, mais un temps d’impression bien plus long." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,4 mm, il présente une " +"hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +"presque négligeables et un temps d’impression plus long." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"La hauteur de couche est importante, ce qui se traduit par des lignes de " +"couche apparentes et une qualité et un temps d’impression ordinaires." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,6 mm, il présente plus de " +"boucles de paroi et une densité de remplissage clairsemée plus élevée. Il en " +"résulte donc une plus grande solidité des impressions, mais une plus grande " +"consommation de filament et un temps d’impression plus long." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,6 mm, il présente une " +"hauteur de couche plus importante, ce qui se traduit par des lignes de " +"couche plus apparentes et une qualité d’impression moindre, mais un temps " +"d’impression plus court dans certains cas d’impression." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,6 mm, il présente une " +"hauteur de couche plus importante, ce qui se traduit par des lignes de " +"couche beaucoup plus apparentes et une qualité d’impression beaucoup plus " +"faible, mais un temps d’impression plus court dans certains cas d’impression." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,6 mm, il présente une " +"hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +"moins apparentes et une qualité d’impression légèrement supérieure, mais un " +"temps d’impression plus long." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,6 mm, il présente une " +"hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +"moins apparentes et une meilleure qualité d’impression, mais un temps " +"d’impression plus long." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" +"Par rapport au profil par défaut d’une buse de 0,8 mm, il présente une " +"hauteur de couche légèrement inférieure, ce qui se traduit par des lignes de " +"couche légèrement moins nombreuses mais toujours apparentes et par une " +"qualité d’impression légèrement supérieure, mais par un temps d’impression " +"plus long dans certains cas d’impression." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Pas d’AMS" + +msgid "There is no device available to send printing." +msgstr "Il n’y a pas de périphérique disponible pour envoyer l’impression." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "Le nombre d’imprimantes utilisées simultanément ne peut être égal à 0." + +msgid "Use External Spool" +msgstr "Utiliser la bobine externe" + +msgid "Select Printers" +msgstr "Sélectionner des imprimantes" + +msgid "Device Name" +msgstr "Nom de l’appareil" + +msgid "Device Status" +msgstr "État de l’appareil" + +msgid "AMS Status" +msgstr "Statut de l’AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Veuillez sélectionner ici les appareils que vous souhaitez gérer (jusqu’à 6 " +"appareils)." + +msgid "Printing Options" +msgstr "Options d’impression" + +msgid "Bed Leveling" +msgstr "Mise à niveau du plateau" + +msgid "Flow Dynamic Calibration" +msgstr "Calibration dynamique du débit" + +msgid "Send Options" +msgstr "Options d’envoi" + +msgid "Send to" +msgstr "Envoyer à" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"imprimantes en même temps. (Cela dépend du nombre d’appareils qui peuvent " +"être chauffés en même temps)." + +msgid "Wait" +msgstr "Attendre" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minute par lot. (Cela dépend du temps nécessaire pour terminer le chauffage.)" + +msgid "Task Sending" +msgstr "Envoi de la tâche" + +msgid "Task Sent" +msgstr "Tâche envoyée" + +msgid "Edit multiple printers" +msgstr "Modifier plusieurs imprimantes" + +msgid "Select connected printers (0/6)" +msgstr "Sélection des imprimantes connectées (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Sélection des imprimantes connectées (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Le nombre maximum d’imprimantes pouvant être sélectionnées est de %d" + +msgid "No task" +msgstr "Aucune tâche" + +msgid "Edit Printers" +msgstr "Modifier les imprimantes" + +msgid "Task Name" +msgstr "Nom de la tâche" + +msgid "Actions" +msgstr "Actions" + +msgid "Task Status" +msgstr "État de la tâche" + +msgid "Sent Time" +msgstr "Heure d’envoi" + +msgid "There are no tasks to be sent!" +msgstr "Il n’y a pas de tâches à envoyer !" + +msgid "No historical tasks!" +msgstr "Aucune tâche historique !" + +msgid "Upgrading" +msgstr "Mise à jour" + +msgid "syncing" +msgstr "synchronisation" + +msgid "Printing Finish" +msgstr "Impression terminée" + +msgid "Printing Failed" +msgstr "Échec de l’impression" + +msgid "Printing Pause" +msgstr "Impression en pause" + +msgid "Pending" +msgstr "En attente" + +msgid "Sending" +msgstr "Envoi" + +msgid "Sending Finish" +msgstr "Fin de l’envoi" + +msgid "Sending Cancel" +msgstr "Annulation de l’envoi" + +msgid "Sending Failed" +msgstr "Échec de l’envoi" + +msgid "Print Success" +msgstr "Succès de l’impression" + +msgid "Print Failed" +msgstr "Échec de l’impression" + +msgid "Removed" +msgstr "Supprimé" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" -msgstr "" +msgstr "Connexion à Obico réussie !" msgid "Could not connect to Obico" -msgstr "" +msgstr "Impossible de se connecter à Obico" msgid "Connected to SimplyPrint successfully!" -msgstr "" +msgstr "Connexion à SimplyPrint réussie !" msgid "Could not connect to SimplyPrint" -msgstr "" +msgstr "Impossible de se connecter à SimplyPrint" msgid "Internal error" -msgstr "" +msgstr "Erreur interne" msgid "Unknown error" -msgstr "" +msgstr "Erreur inconnue" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" +"Le compte SimplyPrint n’est pas lié. Allez dans les options de connexion " +"pour le configurer." -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." -msgstr "" +msgstr "L’état communiqué n’est pas correct." msgid "Please give the required permissions when authorizing this application." msgstr "" +"Veuillez donner les autorisations nécessaires lorsque vous autorisez cette " +"application." msgid "Something unexpected happened when trying to log in, please try again." msgstr "" +"Un événement inattendu s’est produit lors de la connexion, veuillez " +"réessayer." -msgid "User cancelled." +msgid "User canceled." +msgstr "L’utilisateur a annulé." + +msgid "Head diameter" +msgstr "Diamètre de la tête" + +msgid "Max angle" +msgstr "Angle maximal" + +msgid "Detection radius" +msgstr "Rayon de détection" + +msgid "Remove selected points" +msgstr "Retirer les points sélectionnés" + +msgid "Remove all" +msgstr "Supprimer tout" + +msgid "Auto-generate points" +msgstr "Générer automatiquement les points" + +msgid "Add a brim ear" +msgstr "Ajouter une bordure à oreilles" + +msgid "Delete a brim ear" +msgstr "Supprimer une bordure à oreilles" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "Ajuster la vue de section" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Attention : Si le type de bord n’est pas réglé sur « peint », les bordures " +"en oreilles ne seront pas prises en compte !" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " bordure à oreilles invalide" + +msgid "Brim Ears" +msgstr "Bordure à oreilles" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15482,6 +20848,9 @@ msgid "" "Did you know that turning on precise wall can improve precision and layer " "consistency?" msgstr "" +"Paroi précise\n" +"Saviez-vous que l’activation de la paroi précise peut améliorer la précision " +"et l’homogénéité des couches ?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" @@ -15490,12 +20859,18 @@ msgid "" "precision and layer consistency if your model doesn't have very steep " "overhangs?" msgstr "" +"Mode sandwich\n" +"Saviez-vous que vous pouvez utiliser le mode sandwich (intérieur-extérieur-" +"intérieur) pour améliorer la précision et la cohérence des couches si votre " +"modèle n’a pas de porte-à-faux très prononcés ?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" +"Température du caisson\n" +"Saviez-vous qu’Snapmaker Orca prend en charge la température du caisson ?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -15503,24 +20878,36 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" +"Calibrage\n" +"Saviez-vous que le calibrage de votre imprimante peut faire des merveilles ? " +"Découvrez notre solution de calibrage bien-aimée dans Snapmaker Orca." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" +"Ventilateur auxiliaire\n" +"Saviez-vous qu’Snapmaker Orca prend en charge le ventilateur auxiliaire de " +"refroidissement des pièces ?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" +"Filtration de l’air/ventilateur d’extraction\n" +"Saviez-vous qu’Snapmaker Orca peut prendre en charge la filtration de l’air/le " +"ventilateur d’extraction ?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" +"Fenêtre de G-code\n" +"Vous pouvez activer/désactiver la fenêtre G-code en appuyant sur la touche " +"C." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -15528,13 +20915,19 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" +"Changer les espaces de travail\n" +"Vous pouvez alterner entre l’espace de travail Préparer et Aperçu en appuyant sur la touche Tab." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" +"Comment utiliser les raccourcis clavier\n" +"Saviez-vous qu’Snapmaker Orca offre une large gamme de raccourcis clavier et " +"d’opérations sur les scènes 3D?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -15542,6 +20935,10 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" +"Parois inversées sur couches impaires\n" +"Saviez-vous que la fonction Parois inversées sur couches impaires " +"peut améliorer de manière significative la qualité de la surface de vos " +"surplombs ?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -15549,9 +20946,9 @@ msgid "" "Did you know that you can cut a model at any angle and position with the " "cutting tool?" msgstr "" -"Cut Tool\n" -"Did you know that you can cut a model at any angle and position with the " -"cutting tool?" +"Outil de découpe\n" +"Saviez-vous que vous pouvez découper un modèle à n'importe quel angle et " +"dans n'importe quelle position avec l'outil de découpe ?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" @@ -15559,9 +20956,9 @@ msgid "" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " "problems on the Windows system?" msgstr "" -"Fix Model\n" -"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " -"problems on the Windows system?" +"Réparer un modèle\n" +"Saviez-vous que vous pouvez réparer un modèle 3D corrompu pour éviter de " +"nombreux problèmes de découpage sur le système Windows ?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -15569,25 +20966,27 @@ msgid "" "Did you know that you can generate a timelapse video during each print?" msgstr "" "Timelapse\n" -"Did you know that you can generate a timelapse video during each print?" +"Saviez-vous que vous pouvez générer une vidéo en timelapse à chaque " +"impression ?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" -msgstr "" -"Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" +msgstr "" +"Agencement Automatique\n" +"Saviez-vous que vous pouvez agencement automatiquement tous les objets de " +"votre projet ?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" -msgstr "" -"Auto-Orient\n" -"Did you know that you can rotate objects to an optimal orientation for " "printing with a simple click?" +msgstr "" +"Orientation Automatique\n" +"Saviez-vous que vous pouvez faire pivoter des objets dans une orientation " +"optimale pour l'impression d'un simple clic ?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" @@ -15596,10 +20995,10 @@ msgid "" "sits on the print bed? Select the \"Place on face\" function or press the " "F key." msgstr "" -"Lay on Face\n" -"Did you know that you can quickly orient a model so that one of its faces " -"sits on the print bed? Select the \"Place on face\" function or press the " -"F key." +"Poser sur une face\n" +"Saviez-vous qu'il est possible d'orienter rapidement un modèle de manière à " +"ce que l'une de ses faces repose sur le plateau d'impression ? Sélectionnez " +"la fonction « Placer sur la face » ou appuyez sur la touche F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -15607,9 +21006,9 @@ msgid "" "Did you know that you can view all objects/parts in a list and change " "settings for each object/part?" msgstr "" -"Object List\n" -"Did you know that you can view all objects/parts in a list and change " -"settings for each object/part?" +"Liste d'objets\n" +"Saviez-vous que vous pouvez afficher tous les objets/pièces dans une liste " +"et modifier les paramètres de chaque objet/pièce ?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" @@ -15617,6 +21016,9 @@ msgid "" "Did you know that you use the Search tool to quickly find a specific Orca " "Slicer setting?" msgstr "" +"Fonctionnalité de recherche\n" +"Saviez-vous que vous pouvez utiliser l’outil de recherche pour trouver " +"rapidement un paramètre spécifique de l’Snapmaker Orca ?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -15624,6 +21026,10 @@ msgid "" "Did you know that you can reduce the number of triangles in a mesh using the " "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" +"Simplifier le modèle\n" +"Saviez-vous que vous pouviez réduire le nombre de triangles dans un maillage " +"à l’aide de la fonction Simplifier le maillage ? Cliquez avec le bouton " +"droit de la souris sur le modèle et sélectionnez Simplifier le modèle." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" @@ -15631,9 +21037,9 @@ msgid "" "Did you know that you can view all objects/parts on a table and change " "settings for each object/part?" msgstr "" -"Slicing Parameter Table\n" -"Did you know that you can view all objects/parts on a table and change " -"settings for each object/part?" +"Tableau des paramètres de découpe\n" +"Saviez-vous que vous pouvez afficher tous les objets/pièces sur un tableau " +"et modifier les paramètres de chaque objet/pièce ?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" @@ -15641,9 +21047,9 @@ msgid "" "Did you know that you can split a big object into small ones for easy " "colorizing or printing?" msgstr "" -"Split to Objects/Parts\n" -"Did you know that you can split a big object into small ones for easy " -"colorizing or printing?" +"Séparer en objets/parties\n" +"Saviez-vous que vous pouvez séparer un gros objet en petits objets pour les " +"colorier ou les imprimer facilement ?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" @@ -15652,6 +21058,10 @@ msgid "" "part modifier? That way you can, for example, create easily resizable holes " "directly in Snapmaker Orca." msgstr "" +"Soustraire une pièce\n" +"Saviez-vous que vous pouviez soustraire un maillage d’un autre à l’aide du " +"modificateur de partie négative ? De cette façon, vous pouvez, par exemple, " +"créer des trous facilement redimensionnables directement dans Snapmaker Orca." #: resources/data/hints.ini: [hint:STEP] msgid "" @@ -15661,6 +21071,11 @@ msgid "" "Snapmaker Orca supports slicing STEP files, providing smoother results than a " "lower resolution STL. Give it a try!" msgstr "" +"STEP\n" +"Saviez-vous que vous pouvez améliorer votre qualité d'impression en " +"découpant un fichier .step au lieu d'un .stl ?\n" +"Snapmaker Orca prend en charge le découpage des fichiers .step, offrant des " +"résultats plus fluides qu'un .stl de résolution inférieure. Essayez !" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -15669,10 +21084,11 @@ msgid "" "paint it on your print, to have it in a less visible location? This improves " "the overall look of your model. Check it out!" msgstr "" -"Z seam location\n" -"Did you know that you can customize the location of the Z seam, and even " -"paint it on your print, to have it in a less visible location? This improves " -"the overall look of your model. Check it out!" +"Emplacement de la couture Z\n" +"Saviez-vous que vous pouvez personnaliser l'emplacement de la couture Z, et " +"même la peindre manuelle sur votre impression pour le placer dans un endroit " +"moins visible ? Cela améliore l'aspect général de votre modèle. Jetez-y un " +"coup d'œil !" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" @@ -15681,10 +21097,11 @@ msgid "" "prints? Depending on the material, you can improve the overall finish of the " "printed model by doing some fine-tuning." msgstr "" -"Fine-tuning for flow rate\n" -"Did you know that flow rate can be fine-tuned for even better-looking " -"prints? Depending on the material, you can improve the overall finish of the " -"printed model by doing some fine-tuning." +"Réglage fin du débit\n" +"Saviez-vous que le débit peut être réglé avec précision pour obtenir des " +"impressions encore plus belles ? En fonction du matériau, vous pouvez " +"améliorer la finition générale du modèle imprimé en procédant à un réglage " +"fin." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" @@ -15693,10 +21110,10 @@ msgid "" "individual plates ready to print? This will simplify the process of keeping " "track of all the parts." msgstr "" -"Split your prints into plates\n" -"Did you know that you can split a model that has a lot of parts into " -"individual plates ready to print? This will simplify the process of keeping " -"track of all the parts." +"Divisez vos impressions en plateaux\n" +"Saviez-vous que vous pouvez diviser un modèle comportant de nombreuses " +"pièces en plateaux individuels prêts à être imprimés ? Cela simplifie le " +"processus de suivi de toutes les pièces." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] @@ -15705,9 +21122,9 @@ msgid "" "Did you know that you can print a model even faster, by using the Adaptive " "Layer Height option? Check it out!" msgstr "" -"Speed up your print with Adaptive Layer Height\n" -"Did you know that you can print a model even faster by using the Adaptive " -"Layer Height option? Check it out!" +"Accélérez votre impression grâce à la Hauteur de Couche Adaptative\n" +"Saviez-vous que vous pouvez imprimer un modèle encore plus rapidement en " +"utilisant l'option Adaptive Layer Height ? Jetez-y un coup d'œil !" #: resources/data/hints.ini: [hint:Support painting] msgid "" @@ -15716,10 +21133,10 @@ msgid "" "makes it easy to place the support material only on the sections of the " "model that actually need it." msgstr "" -"Support painting\n" -"Did you know that you can paint the location of your supports? This feature " -"makes it easy to place the support material only on the sections of the " -"model that actually need it." +"Peinture de support\n" +"Saviez-vous que vous pouvez peindre l'emplacement de vos supports ? Cette " +"caractéristique permet de placer facilement le matériau de support " +"uniquement sur les sections du modèle qui en ont réellement besoin." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" @@ -15728,10 +21145,11 @@ msgid "" "supports work great for organic models, while saving filament and improving " "print speed. Check them out!" msgstr "" -"Different types of supports\n" -"Did you know that you can choose from multiple types of supports? Tree " -"supports work great for organic models while saving filament and improving " -"print speed. Check them out!" +"Différents types de supports\n" +"Saviez-vous que vous pouvez choisir parmi plusieurs types de supports ? Les " +"supports arborescents fonctionnent parfaitement pour les modèles organiques " +"tout en économisant du filament et en améliorant la vitesse d'impression. " +"Découvrez-les !" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" @@ -15740,48 +21158,49 @@ msgid "" "successfully? Higher temperature and lower speed are always recommended for " "the best results." msgstr "" -"Printing Silk Filament\n" -"Did you know that Silk filament needs special consideration to print " -"successfully? A higher temperature and lower speed are always recommended " -"for the best results." +"Impression de filament Soie\n" +"Saviez-vous que le filament soie nécessite une attention particulière pour " +"une impression réussie ? Une température plus élevée et une vitesse plus " +"faible sont toujours recommandées pour obtenir les meilleurs résultats." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " -"the printing surface, it's recommended to use a brim?" -msgstr "" -"Brim for better adhesion\n" "Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" +msgstr "" +"Bordure pour une meilleure adhésion\n" +"Saviez-vous que lorsque les modèles imprimés ont une faible interface de " +"contact avec la surface d'impression, il est recommandé d'utiliser une " +"bordure ?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" -msgstr "" -"Set parameters for multiple objects\n" -"Did you know that you can set slicing parameters for all selected objects at " "once?" +msgstr "" +"Définir les paramètres de plusieurs objets\n" +"Saviez-vous que vous pouvez définir des paramètres de découpe pour tous les " +"objets sélectionnés en une seule fois ?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" -"Stack objects\n" -"Did you know that you can stack objects as a whole one?" +"Empiler des objets\n" +"Saviez-vous que vous pouvez empiler des objets pour n'en former qu'un?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" -"Flush into support/objects/infill\n" -"Did you know that you can reduce wasted filament by flushing it into support/" -"objects/infill during filament changes?" +"Purger dans les supports/les objets/le remplissage\n" +"Saviez-vous que vous pouvez réduire le filament gaspillé en le purgeant dans " +"les supports/les objets/le remplissage lors des changements de filament ?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" @@ -15789,43 +21208,1880 @@ msgid "" "Did you know that you can use more wall loops and higher sparse infill " "density to improve the strength of the model?" msgstr "" -"Improve strength\n" -"Did you know that you can use more wall loops and higher sparse infill " -"density to improve the strength of the model?" +"Améliorer la solidité\n" +"Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une " +"densité de remplissage plus élevée pour améliorer la résistance du modèle ?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" -"Did you know that opening the printer door can reduce the probability of " -"extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." -msgstr "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature? There is more info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." +msgstr "" +"Quand il faut imprimer avec la porte de l’imprimante ouverte\n" +"Saviez-vous que l’ouverture de la porte de l’imprimante peut réduire la " +"probabilité de blocage de l’extrudeuse/du réchauffeur lors de l’impression " +"de filament à basse température avec une température de boîtier plus élevée? " +"Plus d’informations à ce sujet dans le Wiki." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." -msgstr "" -"Avoid warping\n" -"Did you know that when printing materials that are prone to warping such as " -"ABS, appropriately increasing the heatbed temperature can reduce the " "probability of warping?" +msgstr "" +"Éviter la déformation\n" +"Saviez-vous que lors de l’impression de matériaux susceptibles de se " +"déformer, tels que l’ABS, une augmentation appropriée de la température du " +"plateau chauffant peut réduire la probabilité de déformation?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Hauteur de couche adaptative" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "L’activation de cette option signifie que la hauteur de couche des " +#~ "supports arborescents, à l’exception de la première, sera automatiquement " +#~ "calculée " + +#~ msgid "AMS not connected" +#~ msgstr "AMS non connecté" + +#~ msgid "Ext Spool" +#~ msgstr "Bobine Ext" + +#~ msgid "Guide" +#~ msgstr "Guide" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Étalonnage de l'AMS…" + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Un problème est survenu lors de la calibration. Cliquez pour voir la " +#~ "solution." + +#~ msgid "Calibrate again" +#~ msgstr "Etalonner de nouveau" + +#~ msgid "Cancel calibration" +#~ msgstr "Annuler la calibration" + +#~ msgid "Feed Filament" +#~ msgstr "Chargement du filament" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "" +#~ "Une carte SD doit être insérée avant d'imprimer via le réseau local." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Une carte SD doit être insérée avant l'envoi à l'imprimante." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Remarque : seuls les emplacements AMS chargés avec le même type de " +#~ "matériau peuvent être sélectionnés." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "S’il y a deux filaments identiques dans AMS, la prise en\n" +#~ "charge de la recharge automatique de filaments sera activée.\n" +#~ "\n" +#~ "La prise en charge de la recharge automatique de filaments\n" +#~ "n'est possible qu'avec la même marque, le même type de\n" +#~ "matériau et la même couleur." + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "L'AMS estimera la capacité restante du filament Bambu après la mise à " +#~ "jour des infos du filament. Pendant l'impression, la capacité restante " +#~ "sera automatiquement mise à jour." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "La température minimale recommandée est inférieure à 190°C ou la " +#~ "température maximale recommandée est supérieure à 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Le mode spirale ne fonctionne que lorsque qu'il n'y a qu'une seule paroi, " +#~ "les supports sont désactivés, que les couches supérieures de la coque " +#~ "sont à 0, qu'il n'y a pas de remplissage et que le type timelapse est " +#~ "traditionnel." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Mesure fréquence axes XY" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pause en raison d'un manque de filament" + +#~ msgid "Heating hotend" +#~ msgstr "Préchauffage de la buse" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Étalonnage de l'extrusion" + +#~ msgid "Printing was paused by the user" +#~ msgstr "L’impression a été suspendue par l’utilisateur" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pause de la chute de la couverture avant" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Calibrage du débit d'extrusion" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pause en raison d'un dysfonctionnement de la température de la buse" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "" +#~ "Pause en raison d'un dysfonctionnement de la température du plateau " +#~ "chauffant" + +#~ msgid "Skip step pause" +#~ msgstr "Passer l’étape de la pause" + +#~ msgid "Motor noise calibration" +#~ msgstr "Calibrage du bruit du moteur" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Suspendu en raison de la perte de l’AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Mise en pause en raison de la faible vitesse du ventilateur du heatbreak" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "" +#~ "Mise en pause en raison d’une erreur de contrôle de la température du " +#~ "caisson" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Mise en pause par le G-code inséré par l’utilisateur" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pause en cas de détection de buse couverte de filament" + +#~ msgid "Cutter error pause" +#~ msgstr "Pause en cas d'erreur de coupe" + +#~ msgid "First layer error pause" +#~ msgstr "Pause en cas d'erreur de la première couche" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pause en cas de buse bouchée" + +#~ msgid "Fatal" +#~ msgstr "Mortel" + +#~ msgid "Serious" +#~ msgstr "Sérieux" + +#~ msgid "Common" +#~ msgstr "Commun" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "La température actuelle du caisson ou la température cible du caisson " +#~ "dépasse 45℃. Afin d’éviter le bouchage de l’extrudeur, un filament basse " +#~ "température (PLA/PETG/TPU) ne doit pas être chargé." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Un filament basse température (PLA/PETG/TPU) est chargé dans l’extrudeur. " +#~ "Afin d’éviter le bouchage de l’extrudeur, il n’est pas autorisé de régler " +#~ "la température du caisson au-dessus de 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF n’est pas pris en charge par l’AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Un objet est posé sur la limite du plateau ou dépasse la limite de " +#~ "hauteur.\n" +#~ "Veuillez résoudre le problème en le déplaçant totalement sur ou hors du " +#~ "plateau, et en confirmant que la hauteur entre dans le volume " +#~ "d'impression." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Vous pouvez le trouver dans \n" +#~ "« Paramètres > Réseau > Code de connexion » sur\n" +#~ " l'imprimante, comme illustré sur le schéma:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "La navigation dans les fichiers de la carte SD n’est pas prise en charge " +#~ "par le micrologiciel actuel. Veuillez mettre à jour le micrologiciel de " +#~ "l’imprimante." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Veuillez vérifier si la carte SD est insérée dans l’imprimante.\n" +#~ "Si elle ne peut toujours pas être lue, vous pouvez essayer de formater la " +#~ "carte SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "La navigation dans les fichiers de la carte SD n’est pas prise en charge " +#~ "en mode LAN uniquement." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Stockage indisponible, insérez la carte SD." + +#~ msgid "Cham" +#~ msgstr "Chamb" + +#~ msgid "Still unload" +#~ msgstr "Décharger encore" + +#~ msgid "Still load" +#~ msgstr "Charger encore" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Impossible de démarrer sans carte SD." + +#~ msgid "Update" +#~ msgstr "Mise à jour" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "La sensibilité de pause est" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Pas de filaments AMS. Veuillez sélectionner une imprimante dans la page " +#~ "\"Appareil\" pour charger les informations AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "La synchronisation des filaments avec AMS supprimera tous les préréglages " +#~ "et couleurs de filament actuellement sélectionnés. Voulez-vous continuer ?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Vous avez déjà effectué une synchronisation. Voulez-vous synchroniser " +#~ "uniquement les modifications ou tout resynchroniser ?" + +#~ msgid "Sync" +#~ msgstr "Sync" + +#~ msgid "Resync" +#~ msgstr "Resync" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Il existe des filaments inconnus mappés sur un préréglage générique. " +#~ "Veuillez mettre à jour ou redémarrer Snapmaker Orca pour vérifier s'il " +#~ "existe une mise à jour des préréglages système." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Êtes-vous sûr de vouloir stocker les SVG originaux avec leurs chemins " +#~ "d'accès locaux dans le fichier 3MF ?\n" +#~ "Si vous cliquez sur \"NON\", tous les SVG du projet ne seront plus " +#~ "modifiables." + +#~ msgid "Private protection" +#~ msgstr "Protection privée" + +#~ msgid "General Settings" +#~ msgstr "Paramètres généraux" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Afficher la notification \"Astuce du jour\" après le démarrage" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "" +#~ "Si cette option est activée, des conseils utiles s'affichent au démarrage." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Volumes de purge : Auto-calcul à chaque changement de couleur." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Si cette option est activée, le calcul se fera automatiquement à chaque " +#~ "changement de couleur." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Volumes de purge : Calcul automatique à chaque changement de filament." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Si cette option est activée, le calcul s’effectue automatiquement à " +#~ "chaque changement de filament" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Arrangement automatique de la plaque après le clonage de l’objet" + +#~ msgid "Network" +#~ msgstr "Réseau" + +#~ msgid "User Sync" +#~ msgstr "Synchronisation utilisateur" + +#~ msgid "System Sync" +#~ msgstr "Synchronisation du système" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Associer des URL à Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "chaque" + +#~ msgid "Downloads" +#~ msgstr "Téléchargements" + +#~ msgid "Dark Mode" +#~ msgstr "Mode Sombre" + +#~ msgid "Home page and daily tips" +#~ msgstr "Page d'accueil et Astuces quotidiennes" + +#~ msgid "Show home page on startup" +#~ msgstr "Afficher la page d'accueil au démarrage" + +#~ msgid "Please choose the filament color" +#~ msgstr "Veuillez choisir la couleur du filament" + +#~ msgid "Send print job to" +#~ msgstr "Envoyer le travail d'impression à" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Le filament %s dépasse le nombre d'emplacements AMS. Veuillez mettre à " +#~ "jour le firmware de l'imprimante pour qu'il prenne en charge " +#~ "l'attribution des emplacements AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Le nombre de filaments dépasse le nombre d'emplacements AMS. Veuillez " +#~ "mettre à jour le firmware de l'imprimante pour qu'il prenne en charge " +#~ "l'attribution des emplacements AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "L'affectation des filaments aux emplacements de l'AMS a été réalisée. " +#~ "Vous pouvez cliquer sur un filament ci-dessus pour modifier sa " +#~ "correspondance avec l'emplacement AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Veuillez cliquer sur chaque filament ci-dessus pour indiquer son " +#~ "emplacement AMS avant d'envoyer la tâche d'impression" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Le firmware de l’imprimante ne prend en charge que le mappage séquentiel " +#~ "du filament => emplacement AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Une carte SD doit être insérée avant l'impression." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Une carte SD doit être insérée pour enregistrer un timelapse." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "buse mémorisée : %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Le diamètre de votre buse dans le fichier découpé ne correspond pas à la " +#~ "buse mémorisée. Si vous avez changé de buse récemment, veuillez aller " +#~ "dans Périphérique > Pièces de l’imprimante pour modifier les paramètres." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "L’impression d’un matériau à haute température (matériau %s) avec %s peut " +#~ "endommager la buse" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Connexion à l’imprimante. Impossible d’annuler pendant le processus de " +#~ "connexion." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Attention à l’utilisation ! La calibration du débit sur le plateau PEI " +#~ "texturé double face peut échouer en raison de la surface texturée." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Calibration automatique du débit à l’aide du Micro-Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Envoyer sur la carte SD de l'imprimante" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Il est nécessaire d'insérer une carte MicroSD avant d'envoyer les données " +#~ "vers l'imprimante." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "L'imprimante ne prend pas en charge l'envoi vers la carte SD." + +#~ msgid "Auto-Calc" +#~ msgstr "Auto-Calc" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca recalcule les volumes de purge à chaque fois que la couleur des " +#~ "filaments change. Vous pouvez désactiver le calcul automatique dans Orca " +#~ "Slicer > Préférences" + +#~ msgid "unloaded" +#~ msgstr "déchargé" + +#~ msgid "loaded" +#~ msgstr "chargé" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "De" + +#~ msgid "To" +#~ msgstr "À" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Reprendre l’impression (des défauts sont acceptables)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Reprendre l’impression (problème résolu)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Étape 1. Veuillez confirmer qu’Snapmaker Orca et votre imprimante se " +#~ "trouvent sur le même réseau local." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Etape 2. Si l’IP et le code d’accès ci-dessous sont différents des " +#~ "valeurs réelles de votre imprimante, veuillez les corriger." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Étape 3. Veuillez obtenir le SN de l’imprimante ; il se trouve " +#~ "généralement dans les informations relatives à l’appareil sur l’écran de " +#~ "l’imprimante." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " est trop proche des autres; il peut y avoir des collisions lors de " +#~ "l'impression." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Impossible d'imprimer plusieurs filaments qui ont une grande différence " +#~ "de température ensemble. Sinon, l'extrudeur et la buse peuvent être " +#~ "bloquées ou endommagées pendant l'impression" + +#~ msgid "Ironing angle" +#~ msgstr "Angle de lissage" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Angle auquel le lissage se fait. Un nombre négatif désactive cette " +#~ "fonction et utilise la méthode par défaut." + +#~ msgid "Remove small overhangs" +#~ msgstr "Supprimer les petits surplombs" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Supprimer les petits surplombs qui n’ont peut-être pas besoin de supports." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Seul un des résultats portant le même nom sera enregistré. Êtes-vous sûr " +#~ "de vouloir annuler les autres résultats ?" + +#~ msgid "External Spool" +#~ msgstr "Externe" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Veuillez saisir des valeurs valides :\n" +#~ "Début <= 350\n" +#~ "Fin >= 170\n" +#~ "Début > Fin + 5" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "L’imprimante ou le modèle personnalisé n’est pas saisi, placer la saisie." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "buse dans le préréglage : %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Le diamètre de la buse dans le préréglage ne correspond pas au diamètre " +#~ "de la buse mémorisé. Avez-vous changé de buse récemment ?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*L’impression du matériau %s avec %s peut endommager la buse" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Améliorer la précision de la coque en ajustant l’espacement des parois " +#~ "extérieures. Cela améliore également la consistance des couches." + +#~ msgid "Enable filament ramming." +#~ msgstr "Activer le pilonnage du filament" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Molette de la souris" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Molette de la souris" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Maj + Bouton gauche de la souris" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Entrée" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Maj + souris vers le haut ou vers le bas" + +#~ msgid "Left mouse button:" +#~ msgstr "Bouton gauche de la souris :" + +#~ msgid "Right mouse button:" +#~ msgstr "Bouton droit de la souris :" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Maj + Bouton gauche de la souris :" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Maj + Bouton droit de la souris:" + +#~ msgid "Recent projects" +#~ msgstr "Projets récents" + +#~ msgid "Maximum recent projects" +#~ msgstr "Projets récents maximum" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Nombre maximal de projets récents" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Maj+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Maj+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Toute flèche" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Bouton gauche de la souris" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Bouton gauche de la souris" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Toute flèche" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Bouton gauche de la souris" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Bouton gauche de la souris" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Maj+Bouton gauche de la souris" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Maj+n'importe quelle flèche" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Molette de la souris" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Molette de la souris" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Molette de la souris" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Molette de la souris" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Maj+Molette de la souris" + +#~ msgid "Set Position" +#~ msgstr "Définir la Position" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Cliquez avec le bouton droit sur l'icône pour fixer l'objet modèle" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "L'objet cible ne contient qu'une seule partie et ne peut pas être divisé." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Failed to start printing job" +#~ msgstr "Échec du lancement de la tâche d'impression" + +#~ msgid "Color Scheme" +#~ msgstr "Schéma de couleur" + +#~ msgid "Percent" +#~ msgstr "Pour cent" + +#~ msgid "Used filament" +#~ msgstr "Filament utilisé" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Plus…" + +#~ msgid "More calibrations" +#~ msgstr "Plus de calibrations" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Carte SD" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Pas de carte SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Carte SD anormale" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "L'éjection du périphérique %s(%s) a échoué." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Cette option peut être modifiée ultérieurement dans les préférences, sous " +#~ "« Comportement du chargement »." + +#~ msgid "Invalid number" +#~ msgstr "Numéro invalide" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "buse mémorisée : %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Température du plateau lorsque la Cool Plate est installée. La valeur 0 " +#~ "signifie que le filament ne peut pas être imprimé sur la plaque Cool " +#~ "Plate SuperTack" + +#~ msgid "Ramming settings" +#~ msgstr "Paramètres de pilonnage" + +#~ msgid "Profile dependencies" +#~ msgstr "Dépendances du profil" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "le package de configuration est incompatible avec l'application actuelle." + +#~ msgid "Total ramming time" +#~ msgstr "Durée totale de pilonnage" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Volume total de pilonnage" + +#~ msgid "Ramming line width" +#~ msgstr "Largeur de ligne du pilonnage" + +#~ msgid "Ramming line spacing" +#~ msgstr "Espacement des lignes du pilonnage" + +#~ msgid "Shift+R" +#~ msgstr "Maj+R" + +#~ msgid "resume" +#~ msgstr "reprendre" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Classique" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Activer cette option pour utiliser le mode classique" + +#~ msgid "Compatible machine" +#~ msgstr "Appareils compatibles" + +#~ msgid "Compatible machine condition" +#~ msgstr "État de la machine compatible" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Condition de profils de traitement compatibles" + +#~ msgid "Default filament color" +#~ msgstr "Couleur du filament par défaut" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Faire pivoter la direction du remplissage solide" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "" +#~ "Faire pivoter la direction du remplissage solide de 90° pour chaque " +#~ "couche." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Modèle de compensation du débit, utilisé pour ajuster le débit pour les " +#~ "petites zones de remplissage. Le modèle est exprimé sous la forme d’une " +#~ "paire de valeurs séparées par des virgules pour la longueur d’extrusion " +#~ "et les facteurs de correction du débit, une par ligne, dans le format " +#~ "suivant : « 1.234,5.678 »" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "La plus grande hauteur de couche imprimable pour l'extrudeur. Utilisé tp " +#~ "limite la hauteur de couche maximale lorsque la hauteur de couche " +#~ "adaptative est activée" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "La hauteur de couche imprimable la plus basse pour l'extrudeur. Utilisé " +#~ "tp limite la hauteur de couche minimale lorsque la hauteur de couche " +#~ "adaptative est activée" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Rétracter sur la couche supérieure" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Force la rétraction de la couche supérieure. La désactivation pourrait " +#~ "empêcher le bouchage des motifs très lents avec de petits mouvements, " +#~ "comme la courbe de Hilbert" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Une certaine quantité de matériau dans l'extrudeur est retirée pour " +#~ "éviter le suintement pendant les longs trajets. Définir zéro pour " +#~ "désactiver la rétraction" + +#~ msgid "Speed of retractions." +#~ msgstr "Vitesse de rétraction" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Vitesse de rechargement du filament dans l'extrudeur. Zéro signifie même " +#~ "vitesse avec rétraction" + +#~ msgid "Single loop draft shield" +#~ msgstr "Paravent à simple boucle" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Limite les boucles du paravent à une seule paroi après la première " +#~ "couche. Ceci est utile, dans certains cas, pour économiser du filament, " +#~ "mais peut entraîner la déformation ou la fissuration du paravent." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Espacement des lignes d'interface. Zéro signifie une interface solide" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Épaisseur minimale des éléments fins. Les caractéristiques du modèle qui " +#~ "sont plus fines que cette valeur ne seront pas imprimées, tandis que les " +#~ "entités plus épaisses que la taille minimale seront élargies jusqu'à la " +#~ "largeur de paroi minimale. Exprimée en pourcentage par rapport au " +#~ "diamètre de la buse" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "charger les paramètres actualisés du processus/de la machine lors de " +#~ "l'utilisation de la mise à jour automatique" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "" +#~ "charger les réglages du filament actualisés lors de l’utilisation d’un " +#~ "filament actualisé" + +#~ msgid "Downward machines settings" +#~ msgstr "réglages des machines descendantes" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Chargement des identifiants de filaments pour chaque objet" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Nous avons maintenant ajouté l'auto-calibration pour différents " +#~ "filaments, qui est entièrement automatisée et le résultat sera enregistré " +#~ "dans l'imprimante pour une utilisation future. Vous n'avez besoin " +#~ "d'effectuer la calibration que dans les cas limités suivants :\n" +#~ "1. Si vous utilisez un nouveau filament de marques/modèles différents ou " +#~ "si le filament est humide\n" +#~ "2. Si la buse est usée ou remplacée par une neuve\n" +#~ "3. Si la vitesse volumétrique maximale ou la température d'impression est " +#~ "modifiée dans les préréglages du filament." + +#~ msgid "step: " +#~ msgstr "intervalle: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load stl" +#~ msgstr "Charger stl" + +#~ msgid "Load svg" +#~ msgstr "Charger le svp" + +#~ msgid "Back Page 1" +#~ msgstr "Retour à la page 1" + +#~ msgid "Delete Filament" +#~ msgstr "Supprimer le filament" + +#~ msgid "Refresh Printers" +#~ msgstr "Actualiser les imprimantes" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "Par rapport au profil par défaut d’une buse de 0,2 mm, il présente une " +#~ "hauteur de couche plus petite, ce qui permet d’obtenir des lignes de " +#~ "couche presque invisibles et une qualité d’impression supérieure, mais " +#~ "aussi un temps d’impression plus court." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "Par rapport au profil par défaut de la buse de 0,2 mm, il présente une " +#~ "hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +#~ "minimales et une qualité d’impression supérieure, mais aussi par un temps " +#~ "d’impression plus court." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "La hauteur des couches est très importante, ce qui se traduit par des " +#~ "lignes de couche très apparentes, une qualité d’impression médiocre et un " +#~ "temps d’impression général." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "Par rapport au profil par défaut d’une buse de 0,8 mm, il présente une " +#~ "hauteur de couche plus importante, ce qui se traduit par des lignes de " +#~ "couche très apparentes et une qualité d’impression nettement inférieure, " +#~ "mais un temps d’impression plus court dans certains cas d’impression." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "Par rapport au profil par défaut d’une buse de 0,8 mm, il présente une " +#~ "hauteur de couche beaucoup plus importante, ce qui se traduit par des " +#~ "lignes de couche extrêmement apparentes et une qualité d’impression " +#~ "beaucoup plus faible, mais un temps d’impression beaucoup plus court dans " +#~ "certains cas d’impression." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "Par rapport au profil par défaut d’une buse de 0,8 mm, il présente une " +#~ "hauteur de couche plus petite, ce qui se traduit par des lignes de couche " +#~ "moins nombreuses mais toujours apparentes et une qualité d’impression " +#~ "légèrement supérieure, mais un temps d’impression plus long dans certains " +#~ "cas d’impression." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "La connexion à Flashforge fonctionne correctement." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Impossible de se connecter à Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Régler le type de bordure sur « peint »" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Nous avons ajouté un style expérimental « Arborescent Fin » qui offre un " +#~ "volume de support plus petit mais également une solidité plus faible.\n" +#~ "Nous recommandons de l'utiliser avec : 0 couches d'interface, 0 distance " +#~ "supérieure, 2 parois." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Pour les styles \"Arborescent fort\" et \"Arborescent Hybride\", nous " +#~ "recommandons les réglages suivants : au moins 2 couches d'interface, au " +#~ "moins 0,1 mm de distance entre le haut et le z ou l'utilisation de " +#~ "matériaux de support sur l'interface." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Diamètre des branches à double parois" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Les branches dont la superficie est supérieure à la superficie d’un " +#~ "cercle de ce diamètre seront imprimées avec des doubles parois pour plus " +#~ "de stabilité. Définissez cette valeur sur zéro pour éviter la double " +#~ "paroi." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "Ce paramètre spécifie le nombre de parois autour du support" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Support : génération du parcours d'impression à la couche %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Support : détection des surplombs" + +#~ msgid "Support: propagate branches" +#~ msgstr "Support : propagation des branches" + +#~ msgid "Support: draw polygons" +#~ msgstr "Support : traçage de polygones" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Support : génération du parcours d'impression" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Support : génération des polygones à la couche %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Support : Correction des trous dans la couche %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Support : propagation des branches à la couche %d" + +#~ msgid "Current Cabin humidity" +#~ msgstr "Humidité dans le caisson" + +#~ msgid "Stopped." +#~ msgstr "Arrêté." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "La connexion a échoué [%d] !" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "" +#~ "L'initialisation a échoué (la connexion de l'appareil n'est pas prête) !" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Échec de l’initialisation (Stockage indisponible, insérer la carte SD.) !" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "L'initialisation a échoué (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "" +#~ "Échec de la connexion au réseau local (envoi du fichier d'impression)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Étape 1 : Veuillez confirmer que Snapmaker Orca et votre imprimante sont sur " +#~ "le même réseau local." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Étape 2 : Si l'adresse IP et le code d'accès ci-dessous sont différents " +#~ "des valeurs actuelles de votre imprimante, corrigez-les." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Étape 3 : Effectuer un ping de l’adresse IP pour vérifier la perte de " +#~ "paquets et la latence." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Forcer la ventilation pour les surplombs et ponts" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Activez cette option pour optimiser la vitesse du ventilateur de " +#~ "refroidissement des pièces pour le surplomb et le pont afin d'obtenir un " +#~ "meilleur refroidissement" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Vitesse du ventilateur pour les surplombs" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Forcez le ventilateur de refroidissement des pièces à être à cette " +#~ "vitesse lors de l'impression d'un pont ou d'une paroi en surplomb qui a " +#~ "un degré de surplomb important. Forcer le refroidissement pour les " +#~ "surplombs et le pont pour obtenir une meilleure qualité pour ces pièces." + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Seuil de dépassement de refroidissement" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Forcer le ventilateur de refroidissement à atteindre une vitesse " +#~ "spécifique lorsque le degré de surplomb de la pièce imprimée dépasse " +#~ "cette valeur. Ceci est exprimé en pourcentage qui indique la largeur de " +#~ "la ligne sans support provenant de la couche inférieure. 0%% signifie un " +#~ "refroidissement forcé de toutes les parois extérieures, quel que soit le " +#~ "degré de surplomb." + +#~ msgid "Bridge infill direction" +#~ msgstr "Direction du remplissage des ponts" + +#~ msgid "Bridge density" +#~ msgstr "Densité des ponts" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Densité des ponts externes, Une valeur à 100% signifie un pont plein. La " +#~ "valeur par défaut est 100%." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Améliorez la précision de la coque en ajustant l’espacement des parois " +#~ "extérieures. Cela permet également d’améliorer la cohérence des couches.\n" +#~ "Remarque : ce paramètre n’a d’effet que si la séquence des parois est " +#~ "configurée sur Intérieur-Extérieur." + +#~ msgid "Thick bridges" +#~ msgstr "Ponts épais" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "Filtrer les petits ponts internes (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Cette option permet de réduire la formation de cavités sur les surfaces " +#~ "supérieures des modèles fortement inclinés ou courbés.\n" +#~ "\n" +#~ "Par défaut, les petits ponts internes sont filtrés et le remplissage " +#~ "solide interne est imprimé directement sur le remplissage peu dense. Cela " +#~ "fonctionne bien dans la plupart des cas, accélérant l'impression sans " +#~ "trop compromettre la qualité de la surface supérieure.\n" +#~ "\n" +#~ "Cependant, dans les modèles fortement inclinés ou courbés, en particulier " +#~ "lorsque la densité de remplissage est trop faible, il peut en résulter un " +#~ "gondolement du remplissage solide non soutenu, ce qui provoque un effet " +#~ "de capitonnage.\n" +#~ "\n" +#~ "En désactivant cette option, la couche de pont interne sera imprimée sur " +#~ "un remplissage solide interne légèrement non soutenu. Les options ci-" +#~ "dessous contrôlent la quantité de filtrage, c’est-à-dire la quantité de " +#~ "ponts internes créés.\n" +#~ "\n" +#~ "Filtre - activez cette option. C’est le comportement par défaut et il " +#~ "fonctionne bien dans la plupart des cas.\n" +#~ "\n" +#~ "Filtrage limité - crée des ponts internes sur les surfaces fortement " +#~ "inclinées, tout en évitant de créer des ponts internes inutiles. Cette " +#~ "option fonctionne bien pour la plupart des modèles difficiles.\n" +#~ "\n" +#~ "Pas de filtrage - crée des ponts internes sur chaque surplomb interne " +#~ "potentiel. Cette option est utile pour les modèles à surface supérieure " +#~ "fortement inclinée. Cependant, dans la plupart des cas, elle crée trop de " +#~ "ponts inutiles." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Cette vitesse de ventilateur est appliquée pendant toutes les interfaces " +#~ "de support, pour pouvoir affaiblir leur liaison avec une vitesse de " +#~ "ventilateur élevée.\n" +#~ "Réglez sur -1 pour désactiver ce remplacement.\n" +#~ "Ne peut être remplacé que par disable_fan_first_layers." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "Vitesse d’impression minimale à laquelle l’imprimante ralentira pour " +#~ "tenter de maintenir le temps de couche minimal ci-dessus, lorsque la " +#~ "fonction de ralentissement pour un meilleur refroidissement de la couche " +#~ "est activée." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "ShiftLeft mouse button" + +#~ msgid "Unselect" +#~ msgstr "Désélectionner" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Redimensionner" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Exécution du décalage en Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Décalage du Z lors de la rétraction" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "Nombre de mm de dépassement nécessaire pour que l’inversion soit " +#~ "considérée comme utile. Il peut s’agir d’un pourcentage de la largeur du " +#~ "périmètre.\n" +#~ "La valeur 0 permet l’inversion sur toutes les couches paires." + +#~ msgid "Reverse on odd" +#~ msgstr "Parois inversées sur couches impaires" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Extruder les périmètres dont une partie se trouve au-dessus d’un surplomb " +#~ "dans le sens inverse sur les couches impaires. Ce motif alternatif peut " +#~ "améliorer considérablement les surplombs abrupts.\n" +#~ "\n" +#~ "Ce paramètre peut également contribuer à réduire le gauchissement de la " +#~ "pièce en raison de la réduction des contraintes dans les parois de la " +#~ "pièce." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Appliquer la logique d’inversion des périmètres uniquement sur les " +#~ "périmètres internes.\n" +#~ "\n" +#~ "Ce paramètre réduit considérablement les contraintes exercées sur les " +#~ "pièces, car elles sont désormais réparties dans des directions alternées. " +#~ "Cela devrait réduire la déformation des pièces tout en maintenant la " +#~ "qualité des parois externes. Cette fonction peut être très utile pour les " +#~ "matériaux sujets à la déformation, comme l’ABS/ASA, ainsi que pour les " +#~ "filaments élastiques, comme le TPU et le Silk PLA. Elle peut également " +#~ "contribuer à réduire le gauchissement des régions flottantes sur les " +#~ "supports.\n" +#~ "\n" +#~ "Pour que ce paramètre soit le plus efficace possible, il est recommandé " +#~ "de régler le seuil d’inversion sur 0 afin que toutes les parois internes " +#~ "s’impriment dans des directions alternées sur les couches impaires, quel " +#~ "que soit leur degré de surplomb." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Nombre de mm de dépassement nécessaire pour que l’inversion soit " +#~ "considérée comme utile. Il peut s’agir d’un pourcentage de la largeur du " +#~ "périmètre.\n" +#~ "La valeur 0 permet l’inversion sur toutes les couches impaires." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "La direction dans laquelle les boucles de la paroi sont extrudées lorsque " +#~ "l’on regarde du haut vers le bas.\n" +#~ "\n" +#~ "Par défaut, toutes les parois sont extrudées dans le sens inverse des " +#~ "aiguilles d’une montre, sauf si l’option Inverser sur impair est activée. " +#~ "Si vous choisissez une option autre qu’Auto, la direction des parois sera " +#~ "forcée, indépendamment de l’option Inverser sur l’impair.\n" +#~ "\n" +#~ "Cette option sera désactivée si le mode vase spiral est activé." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Lors de l'impression par objet, l'extrudeur peut entrer en collision avec " +#~ "une jupe.\n" +#~ "Il faut donc remettre la couche de la jupe à 1 pour éviter les collisions." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "Un paravent est utile pour protéger une impression ABS ou ASA contre les " +#~ "risques de déformation et de détachement du plateau d’impression en " +#~ "raison des courants d’air. Il n’est généralement nécessaire que pour les " +#~ "imprimantes à cadre ouvert, c’est-à-dire sans caisson.\n" +#~ "\n" +#~ "Options :\n" +#~ "Activé = la hauteur de la jupe est égale à celle de l’objet imprimé le " +#~ "plus haut.\n" +#~ "Limité = la hauteur de la jupe est celle spécifiée par la hauteur de la " +#~ "jupe.\n" +#~ "\n" +#~ "Remarque : lorsque le paravent est actif, la jupe est imprimée à la " +#~ "distance de la jupe par rapport à l’objet. Par conséquent, si des " +#~ "bordures sont actives, elle risque de les croiser. Pour éviter cela, " +#~ "augmentez la valeur de la distance de la jupe.\n" + +#~ msgid "Limited" +#~ msgstr "Limité" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Ajustez cette valeur pour éviter que des parois courtes et non fermées " +#~ "soient imprimées, ce qui pourrait augmenter le temps d’impression. Des " +#~ "valeurs plus élevées suppriment des parois plus nombreuses et plus " +#~ "longues.\n" +#~ "\n" +#~ "REMARQUE : les surfaces inférieures et supérieures ne sont pas affectées " +#~ "par cette valeur afin d’éviter les lacunes visuelles sur le côté du " +#~ "modèle. Réglez le « seuil d’une paroi » dans les paramètres avancés ci-" +#~ "dessous pour ajuster la sensibilité de ce qui est considéré comme une " +#~ "surface supérieure. Le « seuil d’une paroi » n’est visible que si ce " +#~ "paramètre est supérieur à la valeur par défaut de 0,5 ou si l’option « " +#~ "surfaces supérieures à une paroi » est activée." + +#, c-format, boost-format +#~ msgid "" +#~ "Enable this option to slow down printing in areas where perimeters may " +#~ "have curled upwards.For example, additional slowdown will be applied when " +#~ "printing overhangs on sharp corners like the front of the Benchy hull, " +#~ "reducing curling which compounds over multiple layers.\n" +#~ "\n" +#~ "It is generally recommended to have this option switched on unless your " +#~ "printer cooling is powerful enough or the print speed slow enough that " +#~ "perimeter curling does not happen. If printing with a high external " +#~ "perimeter speed, this parameter may introduce slight artifacts when " +#~ "slowing down due to the large variance in print speeds. If you notice " +#~ "artifacts, ensure your pressure advance is tuned correctly.\n" +#~ "\n" +#~ "Note: When this option is enabled, overhang perimeters are treated like " +#~ "overhangs, meaning the overhang speed is applied even if the overhanging " +#~ "perimeter is part of a bridge. For example, when the perimeters are 100%% " +#~ "overhanging, with no wall supporting them from underneath, the 100%% " +#~ "overhang speed will be applied." +#~ msgstr "" +#~ "Par exemple, un ralentissement supplémentaire sera appliqué lors de " +#~ "l'impression de surplombs sur des angles aigus comme l'avant de la coque " +#~ "du Benchy, réduisant ainsi l'enroulement qui s'aggrave sur plusieurs " +#~ "couches.\n" +#~ "\n" +#~ " Il est généralement recommandé d’activer cette option à moins que le " +#~ "refroidissement de votre imprimante ne soit suffisamment puissant ou que " +#~ "la vitesse d’impression soit suffisamment lente pour que le bouclage du " +#~ "périmètre ne se produise pas. Si vous imprimez avec une vitesse de " +#~ "périmètre externe élevée, ce paramètre peut introduire de légers " +#~ "artefacts lors du ralentissement en raison de la grande variance des " +#~ "vitesses d’impression. Si vous remarquez des artefacts, assurez-vous que " +#~ "votre avance de pression est réglée correctement.\n" +#~ "\n" +#~ "Remarque : lorsque cette option est activée, les périmètres en surplomb " +#~ "sont traités comme des surplombs, ce qui signifie que la vitesse de " +#~ "surplomb est appliquée même si le périmètre en surplomb fait partie d’un " +#~ "pont. Par exemple, lorsque les périmètres sont en surplomb de 100 %%, " +#~ "sans paroi les soutenant par en dessous, la vitesse de surplomb de 100 %% " +#~ "sera appliquée." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "Ne pas filtrer les petits ponts internes (expérimental)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Cette option permet de réduire la formation de creux sur les surfaces " +#~ "supérieures des modèles fortement inclinés ou courbés.\n" +#~ "\n" +#~ "Par défaut, les petits ponts internes sont filtrés et le remplissage " +#~ "plein interne est imprimé directement sur le remplissage peu dense. Cela " +#~ "fonctionne bien dans la plupart des cas, accélérant l'impression sans " +#~ "trop compromettre la qualité de la surface supérieure.\n" +#~ "\n" +#~ "Cependant, dans les modèles fortement inclinés ou courbés, en particulier " +#~ "lorsque la densité de remplissage est trop faible, il peut en résulter un " +#~ "enroulement du remplissage plein non soutenu, ce qui provoque un effet de " +#~ "creusement.\n" +#~ "\n" +#~ "L’activation de cette option permet d’imprimer une couche de pont interne " +#~ "sur un remplissage plein interne légèrement non soutenu. Les options ci-" +#~ "dessous contrôlent la quantité de filtrage, c’est-à-dire la quantité de " +#~ "ponts internes créés.\n" +#~ "\n" +#~ "Désactivé - Désactive cette option. Il s’agit du comportement par défaut, " +#~ "qui fonctionne bien dans la plupart des cas.\n" +#~ "\n" +#~ "Filtrage limité - Crée des ponts internes sur les surfaces fortement " +#~ "inclinées, tout en évitant de créer des ponts internes inutiles. Cette " +#~ "option fonctionne bien pour la plupart des modèles difficiles.\n" +#~ "\n" +#~ "Pas de filtrage - Crée des ponts internes sur chaque surplomb interne " +#~ "potentiel. Cette option est utile pour les modèles à surface supérieure " +#~ "fortement inclinée. Cependant, dans la plupart des cas, elle crée trop de " +#~ "ponts inutiles." + +#, c-format, boost-format +#~ msgid "" +#~ "With increasing print speeds (and hence increasing volumetric flow " +#~ "through the nozzle) and increasing accelerations, it has been observed " +#~ "that the effective PA value typically decreases. This means that a single " +#~ "PA value is not always 100%% optimal for all features and a compromise " +#~ "value is usually used that does not cause too much bulging on features " +#~ "with lower flow speed and accelerations while also not causing gaps on " +#~ "faster features.\n" +#~ "\n" +#~ "This feature aims to address this limitation by modeling the response of " +#~ "your printer's extrusion system depending on the volumetric flow speed " +#~ "and acceleration it is printing at. Internally, it generates a fitted " +#~ "model that can extrapolate the needed pressure advance for any given " +#~ "volumetric flow speed and acceleration, which is then emmited to the " +#~ "printer depending on the current print conditions.\n" +#~ "\n" +#~ "When enabled, the pressure advance value above is overriden. However, a " +#~ "reasonable default value above is strongly recomended to act as a " +#~ "fallback and for when tool changing.\n" +#~ "\n" +#~ msgstr "" +#~ "Avec l’augmentation des vitesses d’impression (et donc du débit " +#~ "volumétrique à travers la buse) et des accélérations, il a été observé " +#~ "que la valeur effective du PA diminue généralement. Cela signifie qu’une " +#~ "valeur PA unique n’est pas toujours optimale à 100 %% pour toutes les " +#~ "caractéristiques et qu’une valeur de compromis est généralement utilisée " +#~ "pour éviter de provoquer un bombement trop important sur les éléments " +#~ "ayant une vitesse d’écoulement et des accélérations plus faibles, tout en " +#~ "évitant de provoquer des lacunes sur les éléments plus rapides.\n" +#~ "\n" +#~ "Cette fonction vise à remédier à cette limitation en modélisant la " +#~ "réponse du système d’extrusion de votre imprimante en fonction de la " +#~ "vitesse d’écoulement volumétrique et de l’accélération de l’impression. " +#~ "En interne, elle génère un modèle ajusté qui peut extrapoler l’avance de " +#~ "pression nécessaire pour une vitesse de débit volumétrique et une " +#~ "accélération données, qui est ensuite émise à l’imprimante en fonction " +#~ "des conditions d’impression actuelles.\n" +#~ "\n" +#~ "Lorsqu’elle est activée, la valeur de l’avance de pression ci-dessus est " +#~ "annulée. Cependant, une valeur par défaut raisonnable est fortement " +#~ "recommandée pour servir de solution de substitution et en cas de " +#~ "changement d’outil.\n" + +#, c-format, boost-format +#~ msgid "" +#~ "Enter the shrinkage percentage that the filament will get after cooling " +#~ "(94%% if you measure 94mm instead of 100mm). The part will be scaled in Z " +#~ "to compensate." +#~ msgstr "" +#~ "Entrez le pourcentage de rétrécissement que le filament obtiendra après " +#~ "refroidissement (94%% si vous mesurez 94mm au lieu de 100mm). La pièce " +#~ "sera mise à l’échelle en Z pour compenser." + +#~ msgid "Shrinkage" +#~ msgstr "Pourcentage de retrait" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "Votre objet est trop grand. Il sera automatiquement réduit pour s’adapter " +#~ "au plateau." + +#~ msgid "Shift+G" +#~ msgstr "Shift+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Active le remplissage des trous pour les surfaces sélectionnées. La " +#~ "longueur minimale du trou qui sera comblé peut être contrôlée à l’aide de " +#~ "l’option « Filtrer les petits trous » ci-dessous.\n" +#~ "\n" +#~ "Options :\n" +#~ "1. Partout : Applique le remplissage des trous aux surfaces pleines " +#~ "supérieures, inférieures et internes.\n" +#~ "2. Surfaces supérieure et inférieure : Remplissage des trous uniquement " +#~ "sur les surfaces supérieures et inférieures.\n" +#~ "3. Nulle part : Désactive le remplissage des trous\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Diminuez légèrement cette valeur (par exemple 0,9) pour réduire la " +#~ "quantité de matériaux pour le pont, pour améliorer l'affaissement" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Cette valeur détermine l’épaisseur de la couche des ponts internes. Il " +#~ "s’agit de la première couche sur le remplissage. Diminuez légèrement " +#~ "cette valeur (par exemple 0.9) pour améliorer la qualité de la surface " +#~ "sur le remplissage." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Ce facteur affecte la quantité de matériau pour le remplissage plein " +#~ "supérieur. Vous pouvez le diminuer légèrement pour avoir une finition de " +#~ "surface lisse" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Ce facteur affecte la quantité de matériau pour le remplissage plein du " +#~ "dessous" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Activer cette option pour ralentir l’impression dans les zones où des " +#~ "périmètres potentiellement courbées peuvent exister." + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "" +#~ "Il s'agit de la vitesse pour les ponts et les parois en surplomb à 100 %." + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Vitesse des ponts internes. Si la valeur est exprimée en pourcentage, " +#~ "elle sera calculée en fonction de bridge_speed. La valeur par défaut est " +#~ "150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Il est temps de charger un nouveau filament lors du changement de " +#~ "filament. Pour les statistiques uniquement" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Il est temps de décharger l'ancien filament lorsque vous changez de " +#~ "filament. Pour les statistiques uniquement" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Temps nécessaire au firmware de l’imprimante (ou au Multi Material Unit " +#~ "2.0) pour charger un nouveau filament lors d’un changement d’outil (lors " +#~ "de l’exécution du code T). Ce temps est ajouté au temps d’impression " +#~ "total par l’estimateur de temps du G-code." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Temps nécessaire au firmware de l’imprimante (ou au Multi Material Unit " +#~ "2.0) pour décharger un filament lors d’un changement d’outil (lors de " +#~ "l’exécution du code T). Ce temps est ajouté au temps d’impression total " +#~ "par l’estimateur de temps du G-code." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtrer les petits espaces au seuil spécifié." + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Activez cette option pour le contrôle de la température du caisson. Une " +#~ "commande M191 sera ajoutée avant \"machine_start_gcode\"\n" +#~ "Commandes G-code : M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Une température de caisson plus élevée peut aider à supprimer ou à " +#~ "réduire la déformation et potentiellement conduire à une force de liaison " +#~ "intercouche plus élevée pour les matériaux à haute température comme " +#~ "l’ABS, l’ASA, le PC, le PA, etc. Dans le même temps, la filtration de " +#~ "l’air de l’ABS et de l’ASA s’aggravera. Pour le PLA, le PETG, le TPU, le " +#~ "PVA et d’autres matériaux à basse température, la température réelle du " +#~ "caisson ne doit pas être élevée pour éviter les bouchages, donc la valeur " +#~ "0 qui signifie éteindre est fortement recommandé." + +#~ msgid "Current association: " +#~ msgstr "Association actuelle : " + +#~ msgid "Associate prusaslicer://" +#~ msgstr "Associer prusaslicer://" + +#~ msgid "Not associated to any application" +#~ msgstr "N’est associé à aucune application" + +#~ msgid "" +#~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " +#~ "models from Printable.com" +#~ msgstr "" +#~ "Associer Snapmaker Orca aux liens prusaslicer:// afin qu’Orca puisse ouvrir " +#~ "des modèles provenant de Printable.com" + +#~ msgid "Associate bambustudio://" +#~ msgstr "Associer bambustudio://" + +#~ msgid "" +#~ "Associate Snapmaker Orca with bambustudio:// links so that Orca can open " +#~ "models from makerworld.com" +#~ msgstr "" +#~ "Associer Snapmaker Orca aux liens bambustudio:// afin qu’Orca puisse ouvrir " +#~ "des modèles provenant de makerworld.com" + +#~ msgid "Associate cura://" +#~ msgstr "Associer cura://" + +#~ msgid "" +#~ "Associate Snapmaker Orca with cura:// links so that Orca can open models from " +#~ "thingiverse.com" +#~ msgstr "" +#~ "Associer Snapmaker Orca aux liens cura:// pour qu’Orca puisse ouvrir les " +#~ "modèles de thingiverse.com" + +#~ msgid "Internel error" +#~ msgstr "Erreur interne" + +#~ msgid "" +#~ "File size exceeds the 100MB upload limit. Please upload your file through " +#~ "the panel." +#~ msgstr "" +#~ "La taille du fichier dépasse la limite de téléchargement de 100 Mo. " +#~ "Veuillez télécharger votre fichier via le panneau." #~ msgid "Please input a valid value (K in 0~0.3)" -#~ msgstr "Please input a valid value (K in 0~0.3)" +#~ msgstr "Veuillez saisir une valeur valide (K entre 0 et 0,3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" +#~ msgstr "" +#~ "Veuillez saisir une valeur valide (K entre 0 et 0,3, N entre 0,6 et 2,0)." + +#~ msgid "PrintingPause" +#~ msgstr "Pause de l’impression" #~ msgid "Printer local connection failed, please try again." -#~ msgstr "Printer local connection failed; please try again." +#~ msgstr "La connexion locale de l'imprimante a échoué, veuillez réessayer." #~ msgid "" #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" @@ -15847,31 +23103,44 @@ msgstr "" #~ "may cause the result not exactly the same in each calibration. We are " #~ "still investigating the root cause to do improvements with new updates." #~ msgstr "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" +#~ "Veuillez trouver les détails de la calibration dynamique du débit sur " +#~ "notre Wiki.\n" #~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" +#~ "Habituellement, la calibration est inutile. Lorsque vous démarrez une " +#~ "impression d'une seule couleur/matériau, avec l'option \"Calibration du " +#~ "débit\" cochée dans le menu de démarrage de l'impression, l'imprimante " +#~ "suivra l'ancienne méthode de calibration du filament avant l'impression.\n" +#~ "Lorsque vous démarrez une impression multi-couleurs/matériaux, " +#~ "l'imprimante utilise le paramètre de compensation par défaut pour le " +#~ "filament lors de chaque changement de filament, ce qui donne un bon " +#~ "résultat dans la plupart des cas.\n" #~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" +#~ "Veuillez noter qu'il y a quelques cas qui rendront le résultat de " +#~ "calibration non fiable : utiliser un plateau texturé pour faire la " +#~ "calibration, utiliser un plateau qui n'a pas une bonne adhérence " +#~ "(veuillez dans ce cas laver la plaque de construction ou appliquer de la " +#~ "colle)… Vous pouvez trouver d'autres cas sur notre Wiki.\n" +#~ "Veuillez noter qu'il y a quelques cas qui rendront le résultat de " +#~ "calibration non fiable : utiliser un plateau texturé pour faire la " +#~ "calibration, utiliser un plateau qui n'a pas une bonne adhérence " +#~ "(veuillez dans ce cas laver la plaque de construction ou appliquer de la " +#~ "colle)… Vous pouvez trouver d'autres cas sur notre Wiki.\n" #~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." +#~ "Les résultats de calibration ont environ 10 % d'écart dans nos tests, ce " +#~ "qui peut faire en sorte que le résultat ne soit pas exactement le même à " +#~ "chaque calibration. Nous enquêtons toujours sur la cause première pour " +#~ "apporter des améliorations avec de nouvelles mises à jour. Les résultats " +#~ "de calibration ont environ 10 % d'écart dans nos tests, ce qui peut faire " +#~ "en sorte que le résultat ne soit pas exactement le même à chaque " +#~ "calibration. Nous enquêtons toujours sur la cause première pour apporter " +#~ "des améliorations avec de nouvelles mises à jour." #~ msgid "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to replace the other results?" +#~ "Un seul des résultats portant le même nom sera enregistré. Voulez-vous " +#~ "vraiment remplacer les autres résultats ?" #, c-format, boost-format #~ msgid "" @@ -15879,88 +23148,224 @@ msgstr "" #~ "Only one of the results with the same name is saved. Are you sure you " #~ "want to overrides the historical result?" #~ msgstr "" -#~ "There is already a previous calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to replace the previous result?" +#~ "Il existe déjà un résultat de calibration portant le même nom : %s. Un " +#~ "seul des résultats portant le même nom est enregistré. Voulez-vous " +#~ "vraiment remplacer le résultat précédent ?" #~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "Please find the corner with the perfect degree of extrusion" +#~ msgstr "Veuillez trouver le coin avec un degré d’extrusion parfait" -#~ msgid "V" -#~ msgstr "V" +#~ msgid "" +#~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " +#~ "PrusaSlicer links from Printable.com" +#~ msgstr "" +#~ "Associer Snapmaker Orca aux liens prusaslicer:// pour qu’Orca puisse ouvrir " +#~ "les liens PrusaSlicer de Printable.com" + +#~ msgid "" +#~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " +#~ "first, which works best in most cases.\n" +#~ "\n" +#~ "Printing walls first may help with extreme overhangs as the walls have " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " +#~ "push out the printed walls where it is attached to them, resulting in a " +#~ "worse external surface finish. It can also cause the infill to shine " +#~ "through the external surfaces of the part." +#~ msgstr "" +#~ "Ordre des parois/remplissages. Lorsque la case n’est pas cochée, les " +#~ "parois sont imprimées en premier, ce qui fonctionne le mieux dans la " +#~ "plupart des cas.\n" +#~ "\n" +#~ "L’impression des parois en premier peut s’avérer utile en cas de " +#~ "surplombs extrêmes, car les parois ont le remplissage voisin auquel " +#~ "adhérer. Cependant, le remplissage repoussera légèrement les parois " +#~ "imprimées à l’endroit où il est fixé, ce qui se traduira par une moins " +#~ "bonne finition de la surface extérieure. Cela peut également faire " +#~ "briller le remplissage à travers les surfaces externes de la pièce." + +#~ msgid "Maximum print speed when purging" +#~ msgstr "Vitesse d’impression maximale lors de la purge" + +#~ msgid "" +#~ "The maximum print speed when purging in the wipe tower. If the sparse " +#~ "infill speed or calculated speed from the filament max volumetric speed " +#~ "is lower, the lowest speed will be used instead.\n" +#~ "Increasing this speed may affect the tower's stability, as purging can be " +#~ "performed over sparse layers. Before increasing this parameter beyond the " +#~ "default of 90 mm/s, make sure your printer can reliably bridge at the " +#~ "increased speeds." +#~ msgstr "" +#~ "Vitesse d’impression maximale lors de la purge dans la tour d’essuyage. " +#~ "Si la vitesse de remplissage ou la vitesse calculée à partir de la " +#~ "vitesse volumétrique maximale du filament est inférieure, c’est la " +#~ "vitesse la plus basse qui sera utilisée.\n" +#~ "L’augmentation de cette vitesse peut affecter la stabilité de la tour, " +#~ "car la purge peut être effectuée sur des couches peu épaisses. Avant " +#~ "d’augmenter ce paramètre au-delà de la valeur par défaut de 90 mm/s, " +#~ "assurez-vous que votre imprimante peut effectuer un pontage fiable aux " +#~ "vitesses accrues." + +#~ msgid "" +#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "Ranellucci and the RepRap community" +#~ msgstr "" +#~ "Snapmaker Orca est basé sur Bambu Studio de Bambulab qui a été développé sur " +#~ "la base de PrusaSlicer de Prusa Research, qui est lui même développé sur " +#~ "la base de Slic3r par Alessandro Ranelucci et la communauté RepRap" #~ msgid "Export &Configs" -#~ msgstr "Export &Configs" +#~ msgstr "Exportation & Configs" + +#~ msgid "" +#~ "Over 4 systems/handy are using remote access, you can close some and try " +#~ "again." +#~ msgstr "" +#~ "Plus de 4 orca/handy utilisent l’accès à distance, vous pouvez en fermer " +#~ "certains et réessayer." + +#, c-format, boost-format +#~ msgid "" +#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " +#~ "The percentage value is relative to line width of sparse infill. Set this " +#~ "value to ~10-15%% to minimize potential over extrusion and accumulation " +#~ "of material resulting in rough top surfaces." +#~ msgstr "" +#~ "La zone de remplissage est légèrement élargie pour chevaucher la paroi " +#~ "afin d’améliorer l’adhérence. La valeur du pourcentage est relative à la " +#~ "largeur de la ligne de remplissage clairsemée. Réglez cette valeur à " +#~ "~10-15%% pour minimiser le risque de sur-extrusion et d’accumulation de " +#~ "matériau, ce qui rendrait les surfaces supérieures rugueuses." + +#~ msgid "" +#~ "Top solid infill area is enlarged slightly to overlap with wall for " +#~ "better bonding and to minimize the appearance of pinholes where the top " +#~ "infill meets the walls. A value of 25-30%% is a good starting point, " +#~ "minimizing the appearance of pinholes. The percentage value is relative " +#~ "to line width of sparse infill" +#~ msgstr "" +#~ "La zone de remplissage solide supérieure est légèrement élargie pour " +#~ "chevaucher la paroi afin d’améliorer l’adhérence et de minimiser " +#~ "l’apparition de trous d’épingle à l’endroit où le remplissage supérieur " +#~ "rencontre les parois. Une valeur de 25-30%% est un bon point de départ, " +#~ "minimisant l’apparition de trous d’épingle. La valeur en pourcentage est " +#~ "relative à la largeur de ligne d’un remplissage peu dense." + +#~ msgid "Export Configs" +#~ msgstr "Exporter les configurations" #~ msgid "Infill direction" -#~ msgstr "Infill direction" +#~ msgstr "Sens de remplissage" #~ msgid "" #~ "Enable this to get a G-code file which has G2 and G3 moves. And the " #~ "fitting tolerance is same with resolution" #~ msgstr "" -#~ "Enable this to get a G-code file with G2 and G3 moves. The fitting " -#~ "tolerance is the same as the resolution." +#~ "Activez cette option pour obtenir un fichier G-code contenant des " +#~ "mouvements G2 et G3. Et la tolérance d'ajustement est la même avec la " +#~ "résolution" #~ msgid "" #~ "Infill area is enlarged slightly to overlap with wall for better bonding. " #~ "The percentage value is relative to line width of sparse infill" #~ msgstr "" -#~ "This allows the infill area to be enlarged slightly to overlap with walls " -#~ "for better bonding. The percentage value is relative to line width of " -#~ "sparse infill." +#~ "La zone de remplissage est légèrement agrandie pour chevaucher la paroi " +#~ "afin d'améliorer l'adhérence. La valeur en pourcentage est relative à la " +#~ "largeur de ligne de remplissage." -#~ msgid "Unload Filament" -#~ msgstr "Unload" +#~ msgid "Actions For Unsaved Changes" +#~ msgstr "Actions pour les changements non enregistrés" + +#~ msgid "Preset Value" +#~ msgstr "Valeur prédéfinie" + +#~ msgid "Modified Value" +#~ msgstr "Valeur modifiée" + +#~ msgid "Transfer Modified Value" +#~ msgstr "Transfert de la valeur modifiée" + +#~ msgid "Use Preset Value" +#~ msgstr "Utiliser la valeur prédéfinie" + +#~ msgid "Save Modified Value" +#~ msgstr "Enregistrer la valeur modifiée" #~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." +#~ "\n" +#~ "Would you like to save these changed settings(modified value)?" #~ msgstr "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" to automatically " -#~ "load or unload filament." +#~ "\n" +#~ "Souhaitez-vous enregistrer les paramètres modifiés (valeur modifiée) ?" -#~ msgid "MC" -#~ msgstr "MC" +#~ msgid "" +#~ "\n" +#~ "Would you like to keep these changed settings(modified value) after " +#~ "switching preset?" +#~ msgstr "" +#~ "\n" +#~ "Souhaitez-vous conserver ces paramètres modifiés (valeur modifiée) après " +#~ "avoir changé de préréglage ?" + +#~ msgid "" +#~ "You have previously modified your settings and are about to overwrite " +#~ "them with new ones." +#~ msgstr "" +#~ "Vous avez précédemment modifié vos paramètres et vous êtes sur le point " +#~ "de les remplacer par de nouveaux." + +#~ msgid "" +#~ "\n" +#~ "Do you want to keep your current modified settings, or use preset " +#~ "settings?" +#~ msgstr "" +#~ "\n" +#~ "Souhaitez-vous conserver vos paramètres modifiés actuels ou utiliser des " +#~ "paramètres prédéfinis ?" + +#~ msgid "" +#~ "\n" +#~ "Do you want to save your current modified settings?" +#~ msgstr "" +#~ "\n" +#~ "Souhaitez-vous sauvegarder vos paramètres modifiés actuels ?" + +#~ msgid "Unload Filament" +#~ msgstr "Déchargement" #~ msgid "MainBoard" -#~ msgstr "MainBoard" +#~ msgstr "Carte mère" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" +#~ msgid "New Flow Dynamics Calibration" +#~ msgstr "Nouvelle calibration de la dynamique du flux" #~ msgid "active" -#~ msgstr "active" +#~ msgstr "actif" #~ msgid "Jump to layer" -#~ msgstr "Jump to layer" +#~ msgstr "Aller à la couche" #~ msgid "Cabin humidity" -#~ msgstr "Cabin humidity" +#~ msgstr "Humidité dans l'AMS" #~ msgid "" #~ "Green means that AMS humidity is normal, orange represent humidity is " #~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" #~ msgstr "" -#~ "Green means that AMS humidity is normal, orange means that humidity is " -#~ "high, and red means that humidity is too high. (Hygrometer: the lower, " -#~ "the better.)" +#~ "Le vert signifie que l'humidité de l'AMS est normale, l'orange signifie " +#~ "que l'humidité est élevée et le rouge signifie que l'humidité est trop " +#~ "élevée. (Hygromètre : plus c'est bas, mieux c'est.)" #~ msgid "Desiccant status" -#~ msgstr "Desiccant status" +#~ msgstr "État du déshydratant" #~ msgid "" #~ "A desiccant status lower than two bars indicates that desiccant may be " #~ "inactive. Please change the desiccant.(The bars: higher the better.)" #~ msgstr "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant. (The higher, the better.)" +#~ "Un état du dessicateur inférieur à deux barres indique que le dessicateur " +#~ "est peut-être inactif. Veuillez changer le déshydratant. (Plus c'est " +#~ "élevé, mieux c'est.)" #~ msgid "" #~ "Note: When the lid is open or the desiccant pack is changed, it can take " @@ -15968,446 +23373,582 @@ msgstr "" #~ "the process. During this time, the indicator may not represent the " #~ "chamber accurately." #~ msgstr "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." +#~ "Remarque: Lorsque le couvercle est ouvert ou que le sachet de dessicateur " +#~ "est changé, cela peut prendre plusieurs heures ou une nuit pour absorber " +#~ "l'humidité. Les basses températures ralentissent également le processus. " +#~ "Pendant ce temps, l'indicateur pourrait ne pas représenter l'humidité " +#~ "dans l'AMS avec précision." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing has finished." +#~ "Remarque : si un nouveau filament est inséré pendant l'impression, l'AMS " +#~ "ne lira automatiquement aucune information avant la fin de l'impression." #, boost-format #~ msgid "Succeed to export G-code to %1%" -#~ msgstr "Success! G-code exported to %1%" +#~ msgstr "Succès! G-code exporté vers %1%" #~ msgid "Initialize failed (No Device)!" -#~ msgstr "Initialization failed (No Device)!" +#~ msgstr "Échec de l'initialisation (pas de périphérique) !" #~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "Initialization failed (No Camera Device)!" +#~ msgstr "L'initialisation a échoué (Pas de caméra)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" -#~ "Printer is busy downloading; please wait for the download to finish." +#~ "L'imprimante est occupée à télécharger, veuillez attendre la fin du " +#~ "téléchargement." + +#~ msgid "Initialize failed (Not supported on the current printer version)!" +#~ msgstr "" +#~ "Échec de l'initialisation (non pris en charge par l'imprimante actuelle) !" #~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "Initialization failed (Not accessible in LAN-only mode)!" +#~ msgstr "L'initialisation a échoué (Non accessible en mode LAN uniquement) !" #~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "Initialization failed (Missing LAN IP of printer)!" +#~ msgstr "" +#~ "Échec de l'initialisation (adresse IP réseau manquante de l'imprimante) !" #, c-format, boost-format #~ msgid "Stopped [%d]!" -#~ msgstr "Stopped [%d]!" +#~ msgstr "Arrêté [%d] !" #, c-format, boost-format #~ msgid "Load failed [%d]!" -#~ msgstr "Loading failed [%d]!" +#~ msgstr "Le chargement a échoué [%d] !" #, c-format, boost-format #~ msgid "No files [%d]" -#~ msgstr "No files [%d]" +#~ msgstr "Aucun fichier [%d]" #, c-format, boost-format #~ msgid "Load failed [%d]" -#~ msgstr "Load failed [%d]" +#~ msgstr "Échec du chargement [%d]" -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Failed to fetch model infomation from printer." +#~ msgid "Failed to fetching model information from printer." +#~ msgstr "" +#~ "Impossible de récupérer les informations du modèle depuis l'imprimante." -#~ msgid "Failed to parse model infomations." -#~ msgstr "Failed to parse model infomation" +#~ msgid "Connection lost. Please retry." +#~ msgstr "Connexion perdue. Veuillez réessayer." + +#~ msgid "File not exists." +#~ msgstr "Le fichier n'existe pas." #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "presets?" +#~ "Vous avez modifié certains paramètres du préréglage \"%1%\".\n" +#~ "Souhaitez-vous conserver ces paramètres modifiés (nouvelle valeur) après " +#~ "avoir changé de préréglage ?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "presets?" +#~ "Vous avez modifié certains paramètres prédéfinis.\n" +#~ "Souhaitez-vous conserver ces paramètres modifiés (nouvelle valeur) après " +#~ "avoir changé de préréglage ?" + +#~ msgid " ℃" +#~ msgstr " ℃" + +#~ msgid "" +#~ "Please go to filament setting to edit your presets if you need.\n" +#~ "Please note that nozzle temperature, hot bed temperature, and maximum " +#~ "volumetric speed have a significant impact on printing quality. Please " +#~ "set them carefully." +#~ msgstr "" +#~ "Si vous le souhaitez, vous pouvez modifier vos préréglages dans les " +#~ "paramètres du filament.\n" +#~ "Veuillez noter que la température de la buse, la température du plateau " +#~ "et la vitesse volumétrique maximale ont un impact significatif sur la " +#~ "qualité de l’impression. Veuillez les régler avec soin." + +#~ msgid "Studio Version:" +#~ msgstr "Version de Studio :" + +#~ msgid "Test BambuLab" +#~ msgstr "Test BambuLab" + +#~ msgid "Test BambuLab:" +#~ msgstr "Test BambuLab :" + +#~ msgid "Test HTTP Service:" +#~ msgstr "Test du service HTTP :" + +#~ msgid "Test storage" +#~ msgstr "Test du stockage" + +#~ msgid "Test Storage Upload:" +#~ msgstr "Test de l’envoi du stockage:" + +#~ msgid "Test storage upgrade" +#~ msgstr "Test de la mise à niveau du stockage" + +#~ msgid "Test Storage Upgrade:" +#~ msgstr "Test de la mise à niveau du stockage :" + +#~ msgid "Test storage download" +#~ msgstr "Test du téléchargement du stockage" + +#~ msgid "Test Storage Download:" +#~ msgstr "Test du téléchargement du stockage :" + +#~ msgid "Test plugin download" +#~ msgstr "Test du téléchargement du plugin" + +#~ msgid "Test Plugin Download:" +#~ msgstr "Test du téléchargement du plugin :" + +#~ msgid "Test Storage Upload" +#~ msgstr "Test de l’envoi du stockage" + +#~ msgid "" +#~ "The speed setting exceeds the printer's maximum speed " +#~ "(machine_max_speed_x/machine_max_speed_y).\n" +#~ "Orca will automatically cap the print speed to ensure it doesn't surpass " +#~ "the printer's capabilities.\n" +#~ "You can adjust the maximum speed setting in your printer's configuration " +#~ "to get higher speeds." +#~ msgstr "" +#~ "Le réglage de la vitesse dépasse la vitesse maximale de l’imprimante " +#~ "(machine_max_speed_x/machine_max_speed_y).\n" +#~ "Orca plafonne automatiquement la vitesse d’impression pour s’assurer " +#~ "qu’elle ne dépasse pas les capacités de l’imprimante.\n" +#~ "Vous pouvez ajuster le paramètre de vitesse maximale dans la " +#~ "configuration de votre imprimante pour obtenir des vitesses plus élevées." + +#~ msgid "" +#~ "Alternate extra wall only works with ensure vertical shell thickness " +#~ "disabled. " +#~ msgstr "" +#~ "La paroi supplémentaire alternée ne fonctionne que si « Assurer " +#~ "l’épaisseur verticale de la coque » est désactivé. " + +#~ msgid "" +#~ "Change these settings automatically?\n" +#~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " +#~ "wall\n" +#~ "No - Don't use alternate extra wall" +#~ msgstr "" +#~ "Modifier ces paramètres automatiquement ?\n" +#~ "Oui - Désactiver « Assurer l’épaisseur verticale de la coque » et activer " +#~ "« Paroi supplémentaire alternée »\n" +#~ "Non - Ne pas utiliser « Paroi supplémentaire alternée »" #~ msgid "" #~ "Add solid infill near sloping surfaces to guarantee the vertical shell " #~ "thickness (top+bottom solid layers)" #~ msgstr "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)." +#~ "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " +#~ "garantir l'épaisseur verticale de la coque (couches solides supérieure" +#~ "+inférieure)." -#~ msgid "Configuration package updated to " -#~ msgstr "Configuration package updated to " - -#~ msgid "The Config can not be loaded." -#~ msgstr "The Config cannot be loaded." - -#~ msgid "Movement:" -#~ msgstr "Movement:" - -#~ msgid "Movement" -#~ msgstr "Movement" - -#~ msgid "Auto Segment" -#~ msgstr "Auto Segment" - -#~ msgid "Depth ratio" -#~ msgstr "Depth ratio" - -#~ msgid "Prizm" -#~ msgstr "Prizm" - -#~ msgid "connector is out of cut contour" -#~ msgstr "connector is out of cut contour" - -#~ msgid "connectors are out of cut contour" -#~ msgstr "connectors are out of cut contour" - -#~ msgid "connector is out of object" -#~ msgstr "connector is out of object" - -#~ msgid "connectors is out of object" -#~ msgstr "Connectors must be on object surface." +#~ msgid "Further reduce solid infill on walls (beta)" +#~ msgstr "Réduire davantage le remplissage solide des parois (expérimental)" #~ msgid "" -#~ "Invalid state. \n" +#~ "Further reduces any solid infill applied to walls. As there will be very " +#~ "limited infill supporting solid surfaces, make sure that you are using " +#~ "adequate number of walls to support the part on sloping surfaces.\n" +#~ "\n" +#~ "For heavily sloped surfaces this option is not suitable as it will " +#~ "generate too thin of a top layer and should be disabled." +#~ msgstr "" +#~ "Réduit encore davantage les remplissages solides appliqués aux parois. " +#~ "Étant donné que le remplissage des surfaces solides sera très limité, " +#~ "assurez-vous que vous utilisez un nombre suffisant de parois pour " +#~ "soutenir la partie sur les surfaces inclinées.\n" +#~ "\n" +#~ "Pour les surfaces fortement inclinées, cette option n’est pas adaptée car " +#~ "elle génère une couche supérieure trop fine et doit être désactivée." + +#~ msgid "Text-Rotate" +#~ msgstr "Rotation du texte" + +#~ msgid "SVG-Rotate" +#~ msgstr "Rotation du SVG" + +#~ msgid "Resize" +#~ msgstr "Redimensionner" + +#~ msgid "Configuration package updated to " +#~ msgstr "Package de configuration mis à jour en " + +#~ msgid "" +#~ "The minimum printing speed for the filament when slow down for better " +#~ "layer cooling is enabled, when printing overhangs and when feature speeds " +#~ "are not specified explicitly." +#~ msgstr "" +#~ "La vitesse d’impression minimale lors du ralentissement pour un meilleur " +#~ "refroidissement des couches est activée, lors de l’impression des " +#~ "surplombs et lorsque les fonctionnalités de vitesses ne sont pas " +#~ "spécifiées explicitement." + +#~ msgid "Small Area Infill Flow Compensation (beta)" +#~ msgstr "" +#~ "Compensation des débits de remplissage des petites zones (expérimental)" + +#~ msgid "Enable Flow Compensation" +#~ msgstr "Activer la compensation de débit" + +#~ msgid "Layer order" +#~ msgstr "Ordre des couches" + +#~ msgid "End end: " +#~ msgstr "Temp. de fin: " + +#~ msgid "The Config cannot be loaded." +#~ msgstr "La configuration ne peut pas être chargée." + +#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." +#~ msgstr "" +#~ "Le fichier 3mf a été généré par une ancienne version de Snapmaker Orca, " +#~ "chargement des données de géométrie uniquement." + +#~ msgid "Movement:" +#~ msgstr "Mouvement:" + +#~ msgid "Movement" +#~ msgstr "Mouvement" + +#~ msgid "Auto Segment" +#~ msgstr "Segmentation automatique" + +#~ msgid "Depth ratio" +#~ msgstr "Rapport de profondeur" + +#~ msgid "Prizm" +#~ msgstr "Prisme" + +#~ msgid "connector is out of cut contour" +#~ msgstr "connecteur est hors du contour de la coupe" + +#~ msgid "connectors are out of cut contour" +#~ msgstr "connecteurs sont hors du contour de la coupe" + +#~ msgid "connector is out of object" +#~ msgstr "connecteur est hors de l'objet" + +#~ msgid "connectors is out of object" +#~ msgstr "connecteurs sont hors de l'objet" + +#~ msgid "" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Invalid state. \n" -#~ "No one part is selected to keep after cut" +#~ "État non valide.\n" +#~ "Aucune pièce n'est sélectionnée pour être conservée après la découpe" + +#~ msgid "Recalculate" +#~ msgstr "Recalculer" + +#~ msgid "" +#~ "Orca recalculates your flushing volumes every time the filament colors " +#~ "change. You can change this behavior in Preferences." +#~ msgstr "" +#~ "Orca recalcule vos volumes de purge à chaque fois que les couleurs des " +#~ "filaments changent. Vous pouvez modifier ce comportement dans les " +#~ "préférences." + +#~ msgid "" +#~ "The printer timed out while receiving a print job. Please check if the " +#~ "network is functioning properly and send the print again." +#~ msgstr "" +#~ "L'imprimante s'est arrêtée pendant la réception d'un travail " +#~ "d'impression. Vérifiez que le réseau fonctionne correctement et relancez " +#~ "l'impression." + +#~ msgid "The beginning of the vendor cannot be a number. Please re-enter." +#~ msgstr "" +#~ "Le début du nom du vendeur ne peut pas être un numéro. Veuillez les " +#~ "saisir à nouveau." #~ msgid "Edit Text" -#~ msgstr "Edit Text" +#~ msgstr "Modifier texte" #~ msgid "Error! Unable to create thread!" -#~ msgstr "Error. Unable to create thread." +#~ msgstr "Erreur! Impossible de créer le fil !" #~ msgid "Exception" -#~ msgstr "Exception" +#~ msgstr "Anomalie" #~ msgid "Choose SLA archive:" -#~ msgstr "Choose SLA archive:" - -#~ msgid "Import file" -#~ msgstr "Import file" +#~ msgstr "Choisissez l'archive SLA:" #~ msgid "Import model and profile" -#~ msgstr "Import model and profile" +#~ msgstr "Importer modèle et profil" #~ msgid "Import profile only" -#~ msgstr "Import profile only" +#~ msgstr "Importer le profil uniquement" #~ msgid "Import model only" -#~ msgstr "Import model only" +#~ msgstr "Importer le modèle uniquement" #~ msgid "Accurate" -#~ msgstr "Accurate" +#~ msgstr "Précis" #~ msgid "Balanced" -#~ msgstr "Balanced" +#~ msgstr "Équilibré" #~ msgid "Quick" -#~ msgstr "Quick" +#~ msgstr "Rapide" #~ msgid "" #~ "Discribe how long the nozzle will move along the last path when retracting" #~ msgstr "" -#~ "This describes how long the nozzle will move along the last path while " -#~ "retracting." +#~ "Décrire combien de temps la buse se déplacera le long du dernier chemin " +#~ "lors de la rétraction" + +#~ msgid "" +#~ "Simplify Model\n" +#~ "Did you know that you can reduce the number of triangles in a mesh using " +#~ "the Simplify mesh feature? Right-click the model and select Simplify " +#~ "model. Read more in the documentation." +#~ msgstr "" +#~ "Simplifier le modèle\n" +#~ "Saviez-vous que vous pouvez réduire le nombre de triangles dans un " +#~ "maillage à l'aide de la fonction Simplifier le maillage ? Cliquez avec le " +#~ "bouton droit sur le modèle et sélectionnez Simplifier le modèle. Pour en " +#~ "savoir plus, consultez la documentation." + +#~ msgid "" +#~ "Subtract a Part\n" +#~ "Did you know that you can subtract one mesh from another using the " +#~ "Negative part modifier? That way you can, for example, create easily " +#~ "resizable holes directly in Snapmaker Orca. Read more in the documentation." +#~ msgstr "" +#~ "Soustraire une partie\n" +#~ "Saviez-vous que vous pouvez soustraire un maillage d'un autre à l'aide du " +#~ "modificateur de partie négative ? De cette façon, vous pouvez, par " +#~ "exemple, créer des trous facilement redimensionnables directement dans " +#~ "Snapmaker Orca. Plus d'informations dans la documentation." #~ msgid "Filling bed " -#~ msgstr "Filling bed" +#~ msgstr "Remplir le plateau" #, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "%1% infill pattern doesn't support 100%% density." +#~ msgstr "" +#~ "Le motif de remplissage %1% ne prend pas en charge une densité de 100%%." #~ msgid "" #~ "Switch to rectilinear pattern?\n" #~ "Yes - switch to rectilinear pattern automaticlly\n" #~ "No - reset density to default non 100% value automaticlly" #~ msgstr "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - Switch to rectilinear pattern automatically\n" -#~ "No - Reset density to default non 100% value automatically" +#~ "Passer à un motif rectiligne ?\n" +#~ "Oui - Passez automatiquement au modèle rectiligne\n" +#~ "Non - Réinitialise automatiquement la densité à la valeur par défaut" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "" -#~ "Please heat the nozzle to above 170 degrees before loading filament." +#~ "Veuillez chauffer la buse à plus de 170°C avant de charger le filament." + +#~ msgid "Show G-code window" +#~ msgstr "Afficher la fenêtre G-code" + +#~ msgid "If enabled, G-code window will be displayed." +#~ msgstr "Si activé, la fenêtre avec les commandes G-code sera affichée." #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" -#~ msgstr "" -#~ "This is the density of internal sparse infill. 100% means that the object " -#~ "will be solid throughout." +#~ msgstr "Densité du remplissage interne, 100%% signifie plein." #~ msgid "Tree support wall loops" -#~ msgstr "Tree support wall loops" +#~ msgstr "Nombre de parois support arborescent" #~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "This setting specifies the wall count around tree support." +#~ msgstr "" +#~ "Ce paramètre spécifie le nombre de murs autour du support arborescent" #, c-format, boost-format #~ msgid " doesn't work at 100%% density " -#~ msgstr " doesn't work at 100%% density " +#~ msgstr " ne fonctionne pas à une densité de 100%% " #~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" +#~ msgstr "Ctrl + Maj + Entrée" #~ msgid "Tool-Lay on Face" -#~ msgstr "Tool-Lay on Face" +#~ msgstr "Outil-Positionner sur une face" #~ msgid "Export as STL" -#~ msgstr "Export as STL" +#~ msgstr "Exporter en tant que STL" #~ msgid "Check cloud service status" -#~ msgstr "Check cloud service status" +#~ msgstr "Vérifiez l'état du service cloud" #~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "Please input a valid value (K in 0~0.5)" +#~ msgstr "Veuillez saisir une valeur valide (K entre 0 et 0,5)" #~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" -#~ msgstr "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" +#~ msgstr "" +#~ "Veuillez saisir une valeur valide (K entre 0 et 0,5, N entre 0,6 et 2,0)" #~ msgid "Export all objects as STL" -#~ msgstr "Export All Objects as STL" +#~ msgstr "Exporter tous les objets au format STL" #~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "The 3mf is not compatible, loading geometry data only!" +#~ msgstr "" +#~ "Le 3mf n'est pas compatible, chargement des données géométriques " +#~ "uniquement!" #~ msgid "Incompatible 3mf" -#~ msgstr "Incompatible 3mf" +#~ msgstr "Fichier 3mf incompatible" #~ msgid "Add/Remove printers" -#~ msgstr "Add/Remove printers" +#~ msgstr "Ajouter/Supprimer des imprimantes" #, c-format, boost-format #~ msgid "%s is not supported by AMS." -#~ msgstr "%s is not supported by the AMS." +#~ msgstr "%s n'est pas pris en charge par l'AMS." #~ msgid "Don't remind me of this version again" -#~ msgstr "Don't remind me about this version again." +#~ msgstr "Ne me rappelez plus cette version." #~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "Error: IP or Access Code are not correct" +#~ msgstr "Erreur : l'adresse IP ou le code d'accès ne sont pas corrects" #~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "Order of inner wall/outer wall/infill" +#~ msgstr "Ordre de mur intérieur/extérieur/remplissage" #~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "This is the print sequence of inner walls, outer walls, and infill." +#~ msgstr "" +#~ "Séquence d'impression du mur intérieur, du mur extérieur et du " +#~ "remplissage." #~ msgid "inner/outer/infill" -#~ msgstr "inner/outer/infill" +#~ msgstr "intérieur/extérieur/remplissage" #~ msgid "outer/inner/infill" -#~ msgstr "outer/inner/infill" +#~ msgstr "extérieur/intérieur/remplissage" #~ msgid "infill/inner/outer" -#~ msgstr "infill/inner/outer" +#~ msgstr "remplissage/intérieur/extérieur" #~ msgid "infill/outer/inner" -#~ msgstr "infill/outer/inner" +#~ msgstr "remplissage/extérieur/intérieur" #~ msgid "inner-outer-inner/infill" -#~ msgstr "inner-outer-inner/infill" - -#~ msgid "Export 3MF" -#~ msgstr "Export 3mf" - -#~ msgid "Export project as 3MF." -#~ msgstr "This exports the project as a 3mf file." - -#~ msgid "Export slicing data" -#~ msgstr "Export slicing data" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Export slicing data to a folder" - -#~ msgid "Load slicing data" -#~ msgstr "Load slicing data" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Load cached slicing data from directory" - -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Slice the plates: 0-all plates, i-plate i, others-invalid" - -#~ msgid "Show command help." -#~ msgstr "This shows command help." - -#~ msgid "UpToDate" -#~ msgstr "UpToDate" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Update the configs values of 3mf to latest." - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max triangle count per plate for slicing" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "max slicing time per plate in seconds" - -#~ msgid "Normative check" -#~ msgstr "Normative check" - -#~ msgid "Check the normative items." -#~ msgstr "Check the normative items." - -#~ msgid "Output Model Info" -#~ msgstr "Output Model Info" - -#~ msgid "Output the model's information." -#~ msgstr "This outputs the model’s information." - -#~ msgid "Export Settings" -#~ msgstr "Export Settings" - -#~ msgid "Export settings to a file." -#~ msgstr "This exports settings to a file." - -#~ msgid "Send progress to pipe" -#~ msgstr "Send progress to pipe" - -#~ msgid "Send progress to pipe." -#~ msgstr "Send progress to pipe." - -#~ msgid "Arrange Options" -#~ msgstr "Arrange Options" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Arrange options: 0-disable, 1-enable, others-auto" - -#~ msgid "Convert Unit" -#~ msgstr "Convert Unit" - -#~ msgid "Convert the units of model" -#~ msgstr "Convert the units of model" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Scale the model by a float factor" - -#~ msgid "Load General Settings" -#~ msgstr "Load General Settings" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Load process/machine settings from the specified file" - -#~ msgid "Load Filament Settings" -#~ msgstr "Load Filament Settings" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Load filament settings from the specified file list" - -#~ msgid "Skip Objects" -#~ msgstr "Skip Objects" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Skip some objects in this print" - -#~ msgid "Output directory" -#~ msgstr "Output directory" - -#~ msgid "Output directory for the exported files." -#~ msgstr "This is the output directory for exported files." - -#~ msgid "Debug level" -#~ msgstr "Debug level" +#~ msgstr "intérieur-extérieur-intérieur/remplissage" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "3D Scene Operations\n" +#~ "Did you know how to control view and object/part selection with mouse and " +#~ "touchpanel in the 3D scene?" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Opérations dans une scène 3D\n" +#~ "Savez-vous comment contrôler la vue et la sélection des objets/pièces " +#~ "avec la souris et l'écran tactile dans la scène 3D ?" -#~ msgid "Embeded" -#~ msgstr "Embedded" +#~ msgid "Embedded" +#~ msgstr "Intégré" + +#~ msgid "" +#~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " +#~ "parsed. Please delete the file and try again." +#~ msgstr "" +#~ "Le fichier de configuration de Snapmaker Orca est peut-être corrompu et ne " +#~ "peut pas être analysé. Veuillez supprimer le fichier et réessayer." #~ msgid "Online Models" -#~ msgstr "Online Models" +#~ msgstr "Modèles en ligne" #~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Show online staff-picked models on the home page" +#~ msgstr "" +#~ "Afficher les modèles en ligne sélectionnés par le staff sur la page " +#~ "d'accueil" #~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "The minimum printing speed when slowing down for cooling." +#~ msgstr "" +#~ "La vitesse d'impression minimale lors du ralentissement pour le " +#~ "refroidissement" + +#~ msgid "" +#~ "There are currently no identical spare consumables available, and " +#~ "automatic replenishment is currently not possible.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Il n'existe actuellement aucun consommable de rechange identique, et le " +#~ "réapprovisionnement automatique n'est actuellement pas possible.\n" +#~ "(Prise en charge actuelle de la fourniture automatique de consommables de " +#~ "la même marque, du même type de matériau et de la même couleur)" + +#~ msgid "Invalid nozzle diameter" +#~ msgstr "Diamètre de la buse non valide" #~ msgid "" #~ "The bed temperature exceeds filament's vitrification temperature. Please " #~ "open the front door of printer before printing to avoid nozzle clog." #~ msgstr "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clogs." +#~ "La température du plateau dépasse la température de vitrification du " +#~ "filament. Veuillez ouvrir la porte avant de l'imprimante avant " +#~ "l'impression pour éviter le bouchage de la buse." #~ msgid "Temperature of vitrificaiton" -#~ msgstr "Temperature of vitrification" +#~ msgstr "Température de vitrification" #~ msgid "" #~ "Material becomes soft at this temperature. Thus the heatbed cannot be " #~ "hotter than this tempature" #~ msgstr "" -#~ "Material becomes soft at this temperature. Thus, the heat bed cannot be " -#~ "hotter than this temperature." +#~ "Le matériau devient mou à cette température. Ainsi, le lit chauffant ne " +#~ "peut pas être plus chaud que cette température" #~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "Enable this option if the machine has an auxiliary part cooling fan" +#~ msgstr "" +#~ "Activez cette option si la machine est équipée d'un ventilateur de " +#~ "refroidissement de pièce auxiliaire" #~ msgid "" #~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " #~ "during printing except the first several layers which is defined by no " #~ "cooling layers" #~ msgstr "" -#~ "This is the speed of auxiliary part cooling fan. The auxiliary fan will " -#~ "run at this speed during printing except for during the first several " -#~ "layers which may be set to have no part cooling." +#~ "Vitesse du ventilateur de refroidissement de la partie auxiliaire. Le " +#~ "ventilateur auxiliaire fonctionnera à cette vitesse pendant l'impression, " +#~ "à l'exception des premières couches qui sont définies par aucune couche " +#~ "de refroidissement" + +#~ msgid "" +#~ "Filter out gaps smaller than the threshold specified. This setting won't " +#~ "affect top/bottom layers" +#~ msgstr "" +#~ "Filtrer les petits espaces au seuil spécifié. Ce paramètre n’affectera " +#~ "pas les couches supérieures/inférieures" #~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "Empty layers around bottom are replaced by nearest normal layers." +#~ msgstr "" +#~ "Les couches vides situées en bas sont remplacées par les couches normales " +#~ "les plus proches." #~ msgid "The model has too many empty layers." -#~ msgstr "The model has too many empty layers." +#~ msgstr "Le modèle a trop de couches vides." #~ msgid "Cali" -#~ msgstr "Cali" +#~ msgstr "Calib." #~ msgid "Calibration of extrusion" -#~ msgstr "Calibration of extrusion" - -#~ msgid "Push new filament into the extruder" -#~ msgstr "Push new filament into the extruder" +#~ msgstr "Calibration de l'extrusion" #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" -#~ "The bed temperature of other layers is lower than the bed temperature of " -#~ "the first layer by more than %d degrees centigrade.\n" -#~ "This may cause models to break free from the build plate during printing." +#~ "La température du plateau des autres couches est inférieure à la " +#~ "température du plateau de la couche initiale de plus de %d degrés. Cela " +#~ "peut entraîner la séparation du modèle du plateau pendant l'impression." #~ msgid "" #~ "Bed temperature is higher than vitrification temperature of this " @@ -16416,49 +23957,51 @@ msgstr "" #~ "Please keep the printer open during the printing process to ensure air " #~ "circulation or reduce the temperature of the hot bed" #~ msgstr "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blockage and print failure.\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed." +#~ "La température du lit est supérieure à la température de vitrification de " +#~ "ce filament.\n" +#~ "Cela peut provoquer un blocage de la buse et une défaillance de " +#~ "l'impression.\n" +#~ "Veuillez laisser l'imprimante ouverte pendant le processus d'impression " +#~ "afin de garantir la circulation de l'air ou de réduire la température du " +#~ "plateau." #~ msgid "Total Time Estimation" -#~ msgstr "Total Time Estimation" +#~ msgstr "Estimation du temps total" #~ msgid "Resonance frequency identification" -#~ msgstr "Resonance frequency identification" +#~ msgstr "Identification de la fréquence de résonance" #~ msgid "Immediately score" -#~ msgstr "Immediately score" +#~ msgstr "Noter immédiatement" #~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Please give a score for your favorite Bambu Market model." +#~ msgstr "Veuillez attribuer une note à votre modèle Bambu Market préféré." #~ msgid "Score" -#~ msgstr "Score" +#~ msgstr "Note" #~ msgid "Bambu High Temperature Plate" -#~ msgstr "Bambu High Temperature Plate" +#~ msgstr "Plaque Haute Température Bambu" #~ msgid "Can't connect to the printer" -#~ msgstr "Can't connect to the printer" +#~ msgstr "Impossible de se connecter à l'imprimante" #~ msgid "Recommended temperature range" -#~ msgstr "Recommended temperature range" +#~ msgstr "Plage de température recommandée" #~ msgid "High Temp Plate" -#~ msgstr "High Temp Plate" +#~ msgstr "Plaque haute température" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" -#~ "This is the bed temperature when the high temperature plate is installed. " -#~ "A value of 0 means the filament does not support printing on the High " -#~ "Temp Plate." +#~ "Il s'agit de la température du plateau lorsque le plateau haute " +#~ "température (\"Cool plate\") est installé. Une valeur à 0 signifie que ce " +#~ "filament ne peut pas être imprimé sur le plateau haute température." #~ msgid "Internal bridge support thickness" -#~ msgstr "Internal bridge support thickness" +#~ msgstr "Épaisseur du support interne du pont" #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " @@ -16468,24 +24011,48 @@ msgstr "" #~ "save a lot of material (default), while hybrid style will create similar " #~ "structure to normal support under large flat overhangs." #~ msgstr "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." +#~ "Style et forme du support. Pour un support normal, la projection des " +#~ "supports sur une grille régulière créera des supports plus stables (par " +#~ "défaut), tandis que des tours de support bien ajustées permettront " +#~ "d'économiser du matériau et de réduire les cicatrices sur les objets.\n" +#~ "Pour les supports Arborescent, le style mince fusionnera les branches de " +#~ "manière plus agressive et économisera beaucoup de matière (par défaut), " +#~ "tandis que le style hybride créera une structure similaire à celle d'un " +#~ "support normal placé sous de grands surplombs plats." + +#~ msgid "Target chamber temperature" +#~ msgstr "Température cible de la chambre" #~ msgid "Bed temperature difference" -#~ msgstr "Bed temperature difference" +#~ msgstr "Différence de température du lit" #~ msgid "" #~ "Do not recommend bed temperature of other layer to be lower than initial " #~ "layer for more than this threshold. Too low bed temperature of other " #~ "layer may cause the model broken free from build plate" #~ msgstr "" -#~ "It is not recommend for bed temperature of other layers to be lower than " -#~ "the first layer by more than this threshold. Too low bed temperature of " -#~ "other layer may cause the model to break free from the build plate." +#~ "Il n'est pas recommandé que la température du plateau des autres couches " +#~ "soit inférieure à celle de la première couche d'un niveau supérieur à ce " +#~ "seuil. Une température de base trop basse de l'autre couche peut " +#~ "provoquer le détachement du modèle." #~ msgid "Orient the model" -#~ msgstr "Orient the model" +#~ msgstr "Orienter le modèle" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "start > 0 step >= 0\n" +#~ "end > start + step" +#~ msgstr "" +#~ "Veuillez saisir des valeurs valides :\n" +#~ "Début > 0 intervalle >= 0\n" +#~ "Fin > Début + Intervalle" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "start > 10 step >= 0\n" +#~ "end > start + step" +#~ msgstr "" +#~ "Veuillez saisir des valeurs valides :\n" +#~ "Début > 10 intervalles >= 0\n" +#~ "Fin > Début + Intervalle" \ No newline at end of file diff --git a/localization/i18n/es/Snapmaker_Orca_es.po b/localization/i18n/es/Snapmaker_Orca_es.po index dea859e19f..3c4cdd1ae8 100644 --- a/localization/i18n/es/Snapmaker_Orca_es.po +++ b/localization/i18n/es/Snapmaker_Orca_es.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" "Last-Translator: Carlos Fco. Caruncho Serrano \n" "Language-Team: \n" @@ -12,13 +12,123 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Poedit 3.4.4\n" +"X-Generator: Poedit 3.5\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU no soportado por el AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Un PVA húmedo se vuelve flexible y se atascará dentro del AMS, por favor, " +"asegurese de secarlo antes de usarlo." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Los filamentos CF/GF son duros y quebradizos. Es fácil romperlos o crear " +"atascos en el AMS, por favor úselos con precaución." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Temperatura" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Inactivo" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Número de serie:" + +msgid "Version:" +msgstr "Versión:" + +msgid "Latest version" +msgstr "Última versión" + +msgid "Support Painting" msgstr "Pintar Soportes" -msgid "Alt + Mouse wheel" -msgstr "Alt + Rueda del ratón" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Rueda de ratón" msgid "Section view" msgstr "Vista de la sección" @@ -26,9 +136,6 @@ msgstr "Vista de la sección" msgid "Reset direction" msgstr "Reiniciar dirección" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Rueda del ratón" - msgid "Pen size" msgstr "Tamaño del lápiz" @@ -44,9 +151,6 @@ msgstr "Botón derecho del ratón" msgid "Block supports" msgstr "Bloquear soportes" -msgid "Shift + Left mouse button" -msgstr "Mayús + Botón izquierdo del ratón" - msgid "Erase" msgstr "Borrar" @@ -103,14 +207,14 @@ msgid "Support Generated" msgstr "Soportes Generados" msgid "Gizmo-Place on Face" -msgstr "Situación-Gizmo enfrente" +msgstr "Herramienta de selección de faceta como base" msgid "Lay on face" -msgstr "Tumbar boca abajo" +msgstr "Seleccionar faceta como base" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "El recuento de filamentos supera el número máximo que admite la herramienta " @@ -118,10 +222,10 @@ msgstr "" "herramienta de pintura." msgid "Color Painting" -msgstr "Pintura en Color" +msgstr "Pintar colores" msgid "Pen shape" -msgstr "Forma de lápiz" +msgstr "Forma del pincel" msgid "Paint" msgstr "Pintar" @@ -153,12 +257,21 @@ msgstr "Relleno de cubos" msgid "Height range" msgstr "Rango de altura" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Intro" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "Alternar Malla Alámbrica" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Cancelar" + msgid "Shortcut Key " msgstr "Tecla de acceso directo " @@ -181,20 +294,44 @@ msgstr "Eliminar color pintado" msgid "Painted using: Filament %1%" msgstr "Pintado con: Filamento %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Tamaño del pincel" + +msgid "Brush shape" +msgstr "Forma del pincel" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Mover" +msgid "Please select at least one object." +msgstr "Por favor seleccione al menos un objeto." + msgid "Gizmo-Move" -msgstr "Movimiento-Gizmo" +msgstr "Herramienta de traslación" msgid "Rotate" msgstr "Rotar" msgid "Gizmo-Rotate" -msgstr "Rotación-Gizmo" +msgstr "Herramienta de rotación" msgid "Optimize orientation" -msgstr "Optimizar orientación" +msgstr "Optimizar orientación" msgid "Apply" msgstr "Aplicar" @@ -203,7 +340,7 @@ msgid "Scale" msgstr "Escalar" msgid "Gizmo-Scale" -msgstr "Reescalar-Gizmo" +msgstr "Ejes de escalado" msgid "Error: Please close all toolbar menus first" msgstr "" @@ -215,17 +352,23 @@ msgstr "pulg" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Posición" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotación" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" -msgstr "Ratios de escala" +msgstr "Ratios de escalado" msgid "Object Operations" msgstr "Operaciones con objetos" @@ -239,9 +382,6 @@ msgstr "Traducir" msgid "Group Operations" msgstr "Operaciones de grupo" -msgid "Set Position" -msgstr "Establecer Posición" - msgid "Set Orientation" msgstr "Establecer Orientación" @@ -249,27 +389,36 @@ msgid "Set Scale" msgstr "Establecer Escala" msgid "Reset Position" -msgstr "Posición de reinicio" +msgstr "Reiniciar posición" msgid "Reset Rotation" msgstr "Reiniciar rotación" -msgid "World coordinates" -msgstr "Coordenadas cartesianas" - msgid "Object coordinates" -msgstr "Coordenadas del objeto" +msgstr "Coordenadas de objeto" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Coordenadas globales" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Tamaño" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "escala uniforme" @@ -277,7 +426,7 @@ msgid "Planar" msgstr "Plano" msgid "Dovetail" -msgstr "Cola de milano" +msgstr "Cola de milano o pato" msgid "Auto" msgstr "Automático" @@ -310,7 +459,7 @@ msgid "Keep orientation" msgstr "Mantener la orientación" msgid "Place on cut" -msgstr "Colocar en la posición de corte" +msgstr "Apoyar el plano de corte" msgid "Flip upside down" msgstr "Dar la vuelta" @@ -333,6 +482,12 @@ msgstr "Forma" msgid "Depth" msgstr "Profundidad" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotación" + msgid "Groove" msgstr "Ranura" @@ -377,10 +532,10 @@ msgid "Change cut mode" msgstr "Cambiar modo de corte" msgid "Tolerance" -msgstr "Toleráncia" +msgstr "Tolerancia" msgid "Drag" -msgstr "Soltar" +msgstr "Arrastrar" msgid "Draw cut line" msgstr "Dibujar línea de corte" @@ -433,9 +588,6 @@ msgstr "Proporción de espacio en relación al radio" msgid "Confirm connectors" msgstr "Confirmar conectores" -msgid "Cancel" -msgstr "Cancelar" - msgid "Build Volume" msgstr "Volumen de Construcción" @@ -471,16 +623,16 @@ msgid "Reset cutting plane and remove connectors" msgstr "Reajustar el plano de corte y retirar los conectores" msgid "Upper part" -msgstr "Parte alta" +msgstr "Parte superior" msgid "Lower part" -msgstr "Parte baja" +msgstr "Parte inferior" msgid "Keep" msgstr "Mantener" msgid "Flip" -msgstr "Girar" +msgstr "Voltear" msgid "After cut" msgstr "Después del corte" @@ -492,7 +644,7 @@ msgid "Perform cut" msgstr "Realizar corte" msgid "Warning" -msgstr "Peligro" +msgstr "Advertencia" msgid "Invalid connectors detected" msgstr "Conectores inválidos detectados" @@ -513,7 +665,7 @@ msgid "Some connectors are overlapped" msgstr "Algunos conectores están solapados" msgid "Select at least one object to keep after cutting." -msgstr "Selecciona al menos un objeto para conservarlo después de cortarlo." +msgstr "Selecciona al menos un objeto que conservar después del corte." msgid "Cut plane is placed out of object" msgstr "El plano de corte se sitúa fuera del objeto" @@ -525,18 +677,18 @@ msgid "Connector" msgstr "Conector" msgid "Cut by Plane" -msgstr "Corte en Plano" +msgstr "Corte por Plano" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"Los bordes con pliegues pueden ser causa de la herramienta de corte, " -"¿quieres arreglarlo ahora?" +"La operación de corte ha resultado en bordes no plegados, ¿Desea repararlos " +"ahora?" msgid "Repairing model object" -msgstr "Reparación de un objeto modelo" +msgstr "Raparando modelo" msgid "Cut by line" -msgstr "Corte en Línea" +msgstr "Corte por Línea" msgid "Delete connector" msgstr "Borrar Conector" @@ -594,14 +746,10 @@ msgstr "%d triángulos" msgid "Show wireframe" msgstr "Mostrar estructura de alambre" -#, boost-format -msgid "%1%" -msgstr "%1%" +msgid "Can't apply when processing preview." +msgstr "No se puede aplicar en la vista previa del proceso." -msgid "Can't apply when process preview." -msgstr "No se puede aplicar cuando la vista previa del proceso." - -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operación ya cancelada. Por favor, espere unos segundos." msgid "Face recognition" @@ -610,12 +758,6 @@ msgstr "Reconocimiento de caras" msgid "Perform Recognition" msgstr "Realizar el reconocimiento" -msgid "Brush size" -msgstr "Tamaño del pincel" - -msgid "Brush shape" -msgstr "Forma del pincel" - msgid "Enforce seam" msgstr "Reforzar costura" @@ -652,14 +794,14 @@ msgid "Angle" msgstr "Ángulo" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Profundidad\n" "Integrada" msgid "Input text" -msgstr "Texto de entrada" +msgstr "Insertar texto" msgid "Surface" msgstr "Superficie" @@ -667,8 +809,8 @@ msgstr "Superficie" msgid "Horizontal text" msgstr "Texto horizontal" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mover ratón arriba u abajo" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Rotar texto" @@ -678,11 +820,11 @@ msgstr "Forma de texto" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" -msgstr "Rotar texto" +msgstr "Texto rotado" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "Mover texto" +msgstr "Text desplzado" msgid "Set Mirror" msgstr "Configurar Espejo" @@ -691,10 +833,10 @@ msgid "Embossed text" msgstr "Texto en relieve" msgid "Enter emboss gizmo" -msgstr "Entrar herramienta de relieve" +msgstr "Abrir la herramienta de relieve" msgid "Leave emboss gizmo" -msgstr "Abandonar herramienta de relieve" +msgstr "Cerrar la herramienta de relieve" msgid "Embossing actions" msgstr "Acciones de relieve" @@ -730,8 +872,8 @@ msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." msgstr "" -"El texto no puede escribirse con la fuente seleccionada. Por favor, intente " -"elegir una fuente diferente." +"El texto no puede escribirse con la fuente seleccionada. Por favor, " +"intentelo de nuevo eligiendo una fuente diferente." msgid "Embossed text cannot contain only white spaces." msgstr "El texto en relieve no puede contener sólo espacios en blanco." @@ -773,7 +915,7 @@ msgid "Operation" msgstr "Operación" msgid "Join" -msgstr "Ingresar" +msgstr "Juntar" msgid "Click to change text into object part." msgstr "Haga clic para cambiar el texto en la parte del objeto." @@ -798,7 +940,7 @@ msgid "Change Text Type" msgstr "Cambiar tipo de texto" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Renombrar estilo(%1%) para texto en relieve" msgid "Name can't be empty." @@ -869,7 +1011,7 @@ msgstr "No se puede eliminar el estilo temporal \"%1%\"." #, boost-format msgid "Modified style \"%1%\"" -msgstr "Estilo modificado \"%1%\"" +msgstr "Estilo \"%1%\" modificado" #, boost-format msgid "Current style is \"%1%\"" @@ -993,7 +1135,7 @@ msgstr "Distancia del centro del texto a la superficie del modelo." msgid "Undo rotation" msgstr "Deshacer la rotación" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Girar el texto en el sentido de las agujas del reloj." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1014,10 +1156,14 @@ msgstr "Poner el texto frente a la cámara" msgid "Orient the text towards the camera." msgstr "Orienta el texto hacia la cámara." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "No se puede cargar exactamente la misma fuente(\"%1%\"). La aplicación " "seleccionó una similar (\"%2%\"). Tiene que especificar la fuente para " @@ -1082,7 +1228,7 @@ msgstr "Desde la superficie" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" -msgstr "Mantener" +msgstr "Mantener verticalidad" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and @@ -1099,10 +1245,10 @@ msgid "SVG move" msgstr "Mover SVG" msgid "Enter SVG gizmo" -msgstr "Introducir el objeto SVG" +msgstr "Abrir herramienta de SVG" msgid "Leave SVG gizmo" -msgstr "Abandonar el objeto SVG" +msgstr "Cerrar la herramienta SVG" msgid "SVG actions" msgstr "Acciones SVG" @@ -1131,14 +1277,14 @@ msgid "Open filled path" msgstr "Abrir camino de relleno" msgid "Undefined stroke type" -msgstr "Tipo de golpe indefinido" +msgstr "Tipo de pincelda indefinido" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" -"El camino no puede curarse de la auto-intersección y los puntos múltiples." +"El trazo no puede ser reparado debido a auto-intersección y múltiples puntos." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "La forma final contiene auto-intersección o múltiples puntos con la misma " @@ -1148,7 +1294,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "La forma está marcada como invisible (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Relleno de forma (%1%) contiene no soportado: %2%." @@ -1163,7 +1309,7 @@ msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "Trazo de forma (%1%) contiene no soportado: %2%." msgid "Face the camera" -msgstr "De cara a la cámara" +msgstr "Alinear con la cámara" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" @@ -1174,12 +1320,13 @@ msgid "SVG file path is \"%1%\"" msgstr "La ruta del archivo SVG es \"%1%\"." msgid "Reload SVG file from disk." -msgstr "Vuelva a cargar el archivo SVG desde el disco." +msgstr "Recargar el archivo SVG desde el disco." msgid "Change file" msgstr "Cambiar archivo" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Cambiar a otro archivo .svg" msgid "Forget the file path" @@ -1189,7 +1336,7 @@ msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" -"NO guarda la ruta local al archivo 3MF. \n" +"NO guarda la ruta local al archivo en el archivo 3MF.\n" "También desactiva la opción 'recargar desde disco'." #. TRN: An menu option to convert the SVG into an unmodifiable model part. @@ -1198,7 +1345,7 @@ msgstr "Hornear" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "Horneado en el modelo como parte no editable" +msgstr "Hornear en el modelo como parte no editable" msgid "Save as" msgstr "Guardar como" @@ -1206,7 +1353,7 @@ msgstr "Guardar como" msgid "Save SVG file" msgstr "Guardar archivo SVG" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "Guardar como archivo '.svg" msgid "Size in emboss direction." @@ -1241,14 +1388,13 @@ msgstr "Reiniciar rotación" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "" "Bloquear/desbloquear el ángulo de rotación al arrastrar por encima de la " -"superficie.Bloquear/desbloquear el ángulo de rotación al arrastrar por " -"encima de la superficie." +"superficie." msgid "Mirror vertically" -msgstr "Espejo vertical" +msgstr "Simetria vertical" msgid "Mirror horizontally" -msgstr "Espejo horizontal" +msgstr "Simetria horizontal" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" @@ -1276,7 +1422,10 @@ msgstr "El analizador Nano SVG no puede cargar desde el archivo (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "El archivo SVG NO contiene una ruta única para el relieve (%1%)." +msgstr "El archivo SVG NO contiene ninguna ruta para el relieve (%1%)." + +msgid "No feature" +msgstr "" msgid "Vertex" msgstr "Vértice" @@ -1302,9 +1451,6 @@ msgstr "Centro de la arista" msgid "Center of circle" msgstr "Centro del círculo" -msgid "ShiftLeft mouse button" -msgstr "Mayúsculas + Botón izquierdo del ratón" - msgid "Select feature" msgstr "Seleccionar característica" @@ -1320,18 +1466,24 @@ msgstr "Reiniciar selección" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Deseleccionar" +msgid "Cancel a feature until exit" +msgstr "Cancelar una característica hasta salir" msgid "Measure" -msgstr "Medida" +msgstr "Medir" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Por favor, confirma que el ratio de explosión = 1, por favor seleccione al " +"menos un objeto" msgid "Edit to scale" msgstr "Editar a escala" msgctxt "Verb" -msgid "Scale" -msgstr "Escala" +msgid "Scale all" +msgstr "Escalar todo" msgid "None" msgstr "Ninguno" @@ -1340,11 +1492,54 @@ msgid "Diameter" msgstr "Diámetro" msgid "Length" -msgstr "Largo" +msgstr "Longitud" msgid "Selection" msgstr "Selección" +msgid " (Moving)" +msgstr "(Moviendo)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Selecciona 2 caras en un objeto y \n" +"haz que los objetos se ensamblen juntos." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Selecciona 2 puntos o círculos en un objeto y \n" +"especifica la distancia entre ellos." + +msgid "Face" +msgstr "Cara" + +msgid " (Fixed)" +msgstr "(Solucionado)" + +msgid "Point" +msgstr "Punto" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Característica 1 se ha reiniciado.\n" +"característica 2 ha sido característica 1" + +msgid "Warning: please select Plane's feature." +msgstr "Advertencia: por favor selecciona la característica del Plano." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" +"Advertencia: por favor selecciona la característica del Punto o Círculo" + +msgid "Warning: please select two different meshes." +msgstr "Advertencia: por favor selecciona dos malla distintas" + msgid "Copy to clipboard" msgstr "Copiar al portapapeles" @@ -1360,8 +1555,26 @@ msgstr "Distancia directa" msgid "Distance XYZ" msgstr "Distancia XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Paralelo" + +msgid "Center coincidence" +msgstr "Centrar coincidencía" + +msgid "Feature 1" +msgstr "Característica 1" + +msgid "Reverse rotation" +msgstr "Revertir Rotación" + +msgid "Rotate around center:" +msgstr "Rotar alrededor del centro:" + +msgid "Parallel distance:" +msgstr "Distancia paralela:" + +msgid "Flip by Face 2" +msgstr "Voltear por la cara 2" msgid "Notice" msgstr "Aviso" @@ -1375,7 +1588,7 @@ msgstr "%1% fue reemplazado por %2%" msgid "The configuration may be generated by a newer version of Snapmaker Orca." msgstr "" -"La configuración puede ser generada por una versión más reciente de " +"La configuración podría haber sido generada por una versión más reciente de " "Snapmaker Orca." msgid "Some values have been replaced. Please check them:" @@ -1402,17 +1615,16 @@ msgstr "" "Se ha cargado el archivo de configuración \"%1%\", pero no se han reconocido " "algunos valores." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" -"Snapmaker Orca terminará porque se está quedando sin memoria. Le agradeceremos " -"que comunique el problema a nuestro equipo." +"Snapmaker Orca se cerrará por falta de memoria. Le agradeceremos que comunique " +"el suceso a nuestro equipo." -# msgid "Snapmaker Orca will terminate because of running out of memory.It may be -# a bug. It will be appreciated if you report the issue to our team." -# msgstr "Snapmaker Orca se cerrará porque se está quedando sin memoria. Le -# agradeceremos que informe de ello a nuestro equipo." msgid "Fatal error" msgstr "Error fatal" @@ -1420,14 +1632,9 @@ msgid "" "Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" -"Snapmaker Orca se cerrará debido a un error de posición. Le agradeceremos que " +"Snapmaker Orca se cerrará debido a un error de traducción. Le agradeceremos que " "nos informe del escenario específico en el que se ha producido este problema." -# msgid "Snapmaker Orca will terminate because of a localization error. It will be -# appreciated if you report the specific scenario this issue happened." -# msgstr "Snapmaker Orca terminará debido a un error de localización. Le -# agradeceríamos que nos informara del escenario específico en el que se ha -# producido este problema" msgid "Critical error" msgstr "Error crítico" @@ -1441,10 +1648,10 @@ msgstr "Sin título" # msgid "Snapmaker Orca got an unhandled exception: %1%" # msgstr "Snapmaker Orca obtuvo una excepción no manejada: %1%" msgid "Downloading Bambu Network Plug-in" -msgstr "Descargando el complemento de Red Bambú" +msgstr "Descargando el plug-in de Red de Bambu Lab" msgid "Login information expired. Please login again." -msgstr "Los datos de acceso han caducado. Por favor, inicie sesión de nuevo." +msgstr "La sesión ha caducado. Por favor, inicie sesión de nuevo." msgid "Incorrect password" msgstr "Contraseña incorrecta" @@ -1458,12 +1665,16 @@ msgid "" "features.\n" "Click Yes to install it now." msgstr "" -"Snapmaker Orca requiere el tiempo de ejecución de Microsoft WebView2 para " -"operar ciertas características.\n" +"Snapmaker Orca requiere de la librería Microsoft WebView2 Runtime para la " +"funcianolidad de ciertas características.\n" "Haga clic en Sí para instalarlo ahora." msgid "WebView2 Runtime" -msgstr "Tiempo de ejecución de WebView2" +msgstr "WebView2 Runtime" + +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" #, c-format, boost-format msgid "" @@ -1471,7 +1682,7 @@ msgid "" "Do you want to continue?" msgstr "" "%s\n" -"¿Quieres continuar?" +"¿Desea continuar?" msgid "Remember my choice" msgstr "Recordar mi selección" @@ -1509,31 +1720,31 @@ msgid "Rebuild" msgstr "Reconstruir" msgid "Loading current presets" -msgstr "Carga de los perfiles actuales" +msgstr "Cargando los perfiles actuales" msgid "Loading a mode view" msgstr "Cargar un modo de vista" -msgid "Choose one file (3mf):" -msgstr "Elija un archivo (3mf):" +msgid "Choose one file (3MF):" +msgstr "Escoja un archivo (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Escoja uno o más archivos (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Escoja uno o más archivos (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Elige uno o más archivos (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Escoja uno o más archivos (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" -msgstr "Escoger archivo ZIP" +msgstr "Escoja archivo ZIP" -msgid "Choose one file (gcode/3mf):" -msgstr "Elegir un archivo (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Escoja un archivo (GCODE/3MF):" msgid "Some presets are modified." -msgstr "Algunos perfiles se modificaron." +msgstr "Algunos perfiles fueron modificados." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Puede mantener los perfiles modificados en el nuevo proyecto, descartar o " @@ -1552,7 +1763,7 @@ msgstr "Abrir proyecto" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "La versión de Snapmaker Orca es una versión demasiado antigua y necesita ser " "actualizada a la última versión antes de poder utilizarla con normalidad" @@ -1564,18 +1775,18 @@ msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"El número de perfiles de usuario almacenados en caché en la nube ha superado " -"el límite superior, los perfiles de usuario recién creados sólo pueden " -"utilizarse localmente." +"El número de perfiles de usuario almacenados en la nube ha superado el " +"número permitido, los perfiles de usuario adicionales sólo podrán utilizarse " +"localmente." msgid "Sync user presets" msgstr "Sincronizar perfiles de usuario" msgid "Loading user preset" -msgstr "Cargando la preselección del usuario" +msgstr "Cargando perfil de usuario" msgid "Switching application language" -msgstr "Cambio de idioma de la aplicación" +msgstr "Cambiando el idioma de la aplicación" msgid "Select the language" msgstr "Seleccionar el idioma" @@ -1590,7 +1801,7 @@ msgid "The uploads are still ongoing" msgstr "Las subidas aún están en curso" msgid "Stop them and continue anyway?" -msgstr "¿Pararlos y continuar de todas maneras?" +msgstr "¿Detenerlas y continuar de todos modos?" msgid "Ongoing uploads" msgstr "Cargas en curso" @@ -1625,7 +1836,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Ha fallado la inicialización de la interfaz gráfica de Snapmaker Orca" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Error fatal, excepción detectada: %1%" msgid "Quality" @@ -1641,7 +1852,7 @@ msgid "Support" msgstr "Soportes" msgid "Flush options" -msgstr "Opciones de flujo" +msgstr "Opciones de purgado de filamento" msgid "Speed" msgstr "Velocidad" @@ -1655,17 +1866,23 @@ msgstr "Capas Sólidas Superiores" msgid "Top Minimum Shell Thickness" msgstr "Espesor Mínimo de la Cubierta Superior" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "Capas Sólidas Inferiores" msgid "Bottom Minimum Shell Thickness" msgstr "Espesor Mínimo de la Cubierta Inferior" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Alisado" msgid "Fuzzy Skin" -msgstr "Piel Difusa" +msgstr "Superficie Rugosa" msgid "Extruders" msgstr "Extrusores" @@ -1692,7 +1909,7 @@ msgid "Add support blocker" msgstr "Añadir bloqueo de soportes" msgid "Add support enforcer" -msgstr "Añadir refuerzo de soportes" +msgstr "Añadir forzado de soportes" msgid "Add text" msgstr "Añadir texto" @@ -1727,6 +1944,9 @@ msgstr "Borrar" msgid "Delete the selected object" msgstr "Eliminar el objeto seleccionado" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Cargar..." @@ -1743,39 +1963,42 @@ msgid "Disc" msgstr "Disco" msgid "Torus" -msgstr "Torus" +msgstr "Toroide" msgid "Orca Cube" msgstr "Cubo Orca" +msgid "Orca Tolerance Test" +msgstr "Test de Tolerancia Orca" + msgid "3DBenchy" msgstr "3DBenchy" msgid "Autodesk FDM Test" -msgstr "Prueba Autodesk FDM" +msgstr "Prueba FDM de Autodesk" msgid "Voron Cube" -msgstr "Cubo de Vorón" +msgstr "Cubo Voron" msgid "Stanford Bunny" msgstr "Conejito Stanford" msgid "Orca String Hell" -msgstr "Infierno de cadena Orca" +msgstr "Test de hilos de Orca \" String Hell\"" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Este modelo presenta texto en relieve en la superficie superior. Para " +"Este modelo contiene texto en relieve en la superficie superior. Para " "obtener resultados óptimos, es aconsejable establecer el \"Umbral de " "perímetro (min_width_top_surface)\" a 0 para que \"Sólo un perímetro en las " -"superficies superiores\" funcione mejor. \n" +"superficies superiores\" funcione mejor.\n" "Sí - Cambiar estos ajustes automáticamente \n" -"No - No cambiar estos ajustes para mí" +"No - No cambiar estos ajustes" msgid "Text" msgstr "Texto" @@ -1790,10 +2013,10 @@ msgid "Change type" msgstr "Cambiar tipo" msgid "Set as an individual object" -msgstr "Ajustar como objeto individual" +msgstr "Cambiar a objeto individual" msgid "Set as individual objects" -msgstr "Ajustar como objetos individuales" +msgstr "Cambiar a objetos individuales" msgid "Fill bed with copies" msgstr "Llenar la cama de copias" @@ -1825,11 +2048,17 @@ msgstr "Reemplazar con STL" msgid "Replace the selected part with new STL" msgstr "Reemplaza la pieza seleccionada con un nuevo STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Cambiar el filamento" msgid "Set filament for selected items" -msgstr "Ajustar el filamento para los elementos seleccionados" +msgstr "Cambiar el filamento para los elementos seleccionados" msgid "Default" msgstr "Por defecto" @@ -1842,13 +2071,13 @@ msgid "current" msgstr "actual" msgid "Scale to build volume" -msgstr "Escala para la impresión del volumen" +msgstr "Escalar al volumen de impresión" msgid "Scale an object to fit the build volume" msgstr "Escalar un objeto para que se ajuste al volumen de impresión" msgid "Flush Options" -msgstr "Opciones de Flujo" +msgstr "Opciones de purgado" msgid "Flush into objects' infill" msgstr "Purgar en el relleno de objetos" @@ -1862,16 +2091,16 @@ msgstr "Purgar en los soportes de objetos" msgid "Edit in Parameter Table" msgstr "Editar en la Tabla de Parámetros" -msgid "Convert from inch" -msgstr "Convertir desde pulgadas" +msgid "Convert from inches" +msgstr "Convertir de pulgadas" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Restaurar a pulgadas" -msgid "Convert from meter" -msgstr "Convertir desde metros" +msgid "Convert from meters" +msgstr "Convertir de metros" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Restaurar a metros" msgid "Assemble" @@ -1881,34 +2110,34 @@ msgid "Assemble the selected objects to an object with multiple parts" msgstr "Ensamblar los objetos seleccionados en un objeto con múltiples piezas" msgid "Assemble the selected objects to an object with single part" -msgstr "Ensamblar los objetos seleccionados en un objeto con una sola pieza" +msgstr "Ensamblar los objetos seleccionados en un objeto de una sola pieza" msgid "Mesh boolean" -msgstr "Malla booleana" +msgstr "Operaciones booleanas de malla" msgid "Mesh boolean operations including union and subtraction" -msgstr "Las operaciones de malla booleana incluidas en la unión y resta" +msgstr "Operaciones booleanas de malla incluyendo la unión y substracción" msgid "Along X axis" msgstr "A lo largo del eje X" msgid "Mirror along the X axis" -msgstr "Espejo a lo largo del eje X" +msgstr "Reflejar a lo largo del eje X" msgid "Along Y axis" msgstr "A lo largo del eje Y" msgid "Mirror along the Y axis" -msgstr "Espejo a lo largo del eje Y" +msgstr "Reflejar a lo largo del eje Y" msgid "Along Z axis" msgstr "A lo largo del eje Z" msgid "Mirror along the Z axis" -msgstr "Espejo a lo largo del eje Z" +msgstr "Reflejar a lo largo del eje Z" msgid "Mirror object" -msgstr "Objeto reflejado" +msgstr "Reflejar objeto" msgid "Edit text" msgstr "Editar texto" @@ -1958,10 +2187,19 @@ msgstr "Dividir el objeto seleccionado" msgid "Auto orientation" msgstr "Orientación automática" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "" "Orienta automáticamente el objeto para mejorar la calidad de la impresión." +msgid "Edit" +msgstr "Editar" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Seleccionar Todo" @@ -1978,7 +2216,7 @@ msgid "Arrange" msgstr "Organizar" msgid "arrange current plate" -msgstr "Ordenar la bandeja actual" +msgstr "Organizar la bandeja actual" msgid "Reload All" msgstr "Recargar todo" @@ -1996,7 +2234,31 @@ msgid "Delete Plate" msgstr "Borrar Bandeja" msgid "Remove the selected plate" -msgstr "Retirar la bandeja seleccionada" +msgstr "Eliminar la bandeja seleccionada" + +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" msgid "Clone" msgstr "Clonar" @@ -2007,8 +2269,17 @@ msgstr "Simplificar Modelo" msgid "Center" msgstr "Centrar" +msgid "Drop" +msgstr "Soltar" + msgid "Edit Process Settings" -msgstr "Editar Ajustes de Procesado" +msgstr "Editar Ajustes de Proceso" + +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" msgid "Edit print parameters for a single object" msgstr "Editar los parámetros de impresión de un solo objeto" @@ -2017,7 +2288,7 @@ msgid "Change Filament" msgstr "Cambiar el Filamento" msgid "Set Filament for selected items" -msgstr "Ajustar el filamento para los elementos seleccionados" +msgstr "Cambiar el filamento para los elementos seleccionados" msgid "Unlock" msgstr "Desbloquear" @@ -2043,8 +2314,8 @@ msgstr[1] "%1$d errores reparados" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "Error: %1$d contorno no moldeado." -msgstr[1] "Error: %1$d contornos no moldeados." +msgstr[0] "Error: %1$d contorno con geometría incorrecta." +msgstr[1] "Error: %1$d contornos con geometría incorrecta." msgid "Remaining errors" msgstr "Errores restantes" @@ -2052,13 +2323,11 @@ msgstr "Errores restantes" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d contorno no moldeado" -msgstr[1] "%1$d contornos no moldeados" +msgstr[0] "%1$d contorno con geometría incorrecta" +msgstr[1] "%1$d contornos con geometría incorrecta" -msgid "Right click the icon to fix model object" +msgid "Click the icon to repair model object" msgstr "" -"Haga clic con el botón derecho del ratón en el icono para reparar el objeto " -"del modelo" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2070,18 +2339,18 @@ msgstr "Haga clic en el icono para restablecer todos los ajustes del objeto" msgid "Right button click the icon to drop the object printable property" msgstr "" -"Haga clic con el botón derecho en el icono para descartar la característica " +"Haga clic con el botón derecho en el icono para descartar la propiedad de " "imprimible del objeto" msgid "Click the icon to toggle printable property of the object" msgstr "" -"Haga clic en el icono para alternar la característica imprimible del objeto" +"Haga clic en el icono para alternar la propiedad de imprimible del objeto" msgid "Click the icon to edit support painting of the object" -msgstr "Haga clic en el icono para editar la pintura de apoyo del objeto" +msgstr "Haga clic en el icono para editar el pintado de apoyos del objeto" msgid "Click the icon to edit color painting of the object" -msgstr "Haga clic en el icono para editar la pintura de color del objeto" +msgstr "Haga clic en el icono para editar el pintado de colores del objeto" msgid "Click the icon to shift this object to the bed" msgstr "Presionar el icono para desplazar este objeto a la cama" @@ -2103,15 +2372,18 @@ msgstr "Añadir modificador" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "" -"Cambia al modo de ajuste por objeto para editar los ajustes de los " +"Cambia al modo de ajuste a modo por objeto para editar los ajustes de los " "modificadores." msgid "" "Switch to per-object setting mode to edit process settings of selected " "objects." msgstr "" -"Cambiar al modo de ajuste por objeto para editar los ajustes de proceso de " -"los objetos." +"Cambiar al modo de ajuste a modo por objeto para editar los ajustes de " +"proceso de los objetos." + +msgid "Remove paint-on fuzzy skin" +msgstr "" msgid "Delete connector from object which is a part of cut" msgstr "Borrar conector del objeto el cual es parte del corte" @@ -2131,12 +2403,12 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" -"La acción interrumpirá la correspondencia de corte.\n" +"La acción interrumpirá la correspondencia de un corte.\n" "Después de esto la consistencia no podrá ser garantizada.\n" "\n" "Para manipular partes sólidas o volúmenes negativos tienes que invalidar la " @@ -2148,11 +2420,11 @@ msgstr "Borrar todos los conectores" msgid "Deleting the last solid part is not allowed." msgstr "No se permite borrar la última parte sólida." -msgid "The target object contains only one part and can not be splited." -msgstr "El objeto de destino sólo contiene una pieza y no se puede dividir." +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" -msgstr "Montaje" +msgstr "Ensamblaje" msgid "Cut Connectors information" msgstr "Información de Conectores de Corte" @@ -2164,13 +2436,13 @@ msgid "Group manipulation" msgstr "Manipulación de grupo" msgid "Object Settings to modify" -msgstr "Ajustes de objeto modificables" +msgstr "Ajustes de objeto a modificar" msgid "Part Settings to modify" -msgstr "Ajustes de pieza modificables" +msgstr "Ajustes de pieza a modificar" msgid "Layer range Settings to modify" -msgstr "Ajustes de capa modificables" +msgstr "Ajustes de capa a modificar" msgid "Part manipulation" msgstr "Manipulación de piezas" @@ -2191,14 +2463,14 @@ msgid "Selection conflicts" msgstr "Conflictos en la selección" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Si el primer elemento seleccionado es un objeto, el segundo también debería " "serlo." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Si el primer elemento seleccionado es una pieza, el segundo debe ser una " "pieza en el mismo objeto." @@ -2213,7 +2485,7 @@ msgid "Support Blocker" msgstr "Bloqueador de soporte" msgid "Support Enforcer" -msgstr "Refuerzo de Soportes" +msgstr "Forzado de Soportes" msgid "Type:" msgstr "Tipo:" @@ -2262,7 +2534,7 @@ msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" "una celda sólo puede copiarse en una o varias celdas de la misma columna" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "no se admite la copia de múltiples celdas" msgid "Outside" @@ -2283,6 +2555,9 @@ msgstr "Borde de Adherencia Automático" msgid "Mouse ear" msgstr "Oreja de ratón" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Solo borde de adherencia exterior" @@ -2401,7 +2676,7 @@ msgid "Delete Filament Change" msgstr "Borrar Cambio de Filamento" msgid "No printer" -msgstr "Sin impresión" +msgstr "Sin impresora" msgid "..." msgstr "..." @@ -2420,38 +2695,23 @@ msgstr "Error al conectar con el servicio en la nube" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "" -"Haga clic en el hipervínculo anterior para ver el estado del servicio en la " +"Haga clic en el hipervínculo anterior para ver el estado del servicio de la " "nube" msgid "Failed to connect to the printer" msgstr "No se ha podido conectar a la impresora" msgid "Connection to printer failed" -msgstr "Connection to printer failed" +msgstr "Conexión fallida con la impresora" msgid "Please check the network connection of the printer and Orca." msgstr "Compruebe la conexión de red de la impresora y Orca." msgid "Connecting..." -msgstr "Conectando…" +msgstr "Conectando..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Vacío" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Rellenado" - -msgid "AMS not connected" -msgstr "AMS no conectado" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Cargar" @@ -2459,31 +2719,124 @@ msgstr "Cargar" msgid "Unload" msgstr "Descarga" -msgid "Ext Spool" -msgstr "Carrete Externo" - -msgid "Tips" -msgstr "Consejos" - -msgid "Guide" -msgstr "Guía" - -msgid "Retry" -msgstr "Reintentar" - -msgid "Calibrating AMS..." -msgstr "Calibración de AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"Se ha producido un problema durante la calibración. Haga clic para ver la " -"solución." +"Elija una ranura AMS y pulse el botón \"Cargar\" o \"Descargar\" para cargar " +"o descargar automáticamente el filamento." -msgid "Calibrate again" -msgstr "Calibrar de nuevo" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "Cancelar calibración" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtro" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Refrigeración" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Superior" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "En espera..." @@ -2500,44 +2853,37 @@ msgstr "Extraer el filamento actual" msgid "Push new filament into extruder" msgstr "Introducir nuevo filamento en el extrusor" +msgid "Grab new filament" +msgstr "Cargar nuevo filamento" + msgid "Purge old filament" msgstr "Purgar el filamento viejo" -msgid "Feed Filament" -msgstr "Cargar Filamento" - msgid "Confirm extruded" msgstr "Confirmación de extrusión" msgid "Check filament location" msgstr "Probar localización de filamento" -msgid "Grab new filament" -msgstr "Cargar nuevo filamento" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Elija una ranura AMS y pulse el botón \"Cargar\" o \"Descargar\" para cargar " -"o descargar automáticamente el filamento." -msgid "Edit" -msgstr "Editar" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Todos los objetos seleccionados están en la bandeja bloqueada,\n" "No podemos hacer un auto posicionamiento en estos objetos." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "No se han seleccionado objetos posicionables." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Esta bandeja está bloqueada,\n" "No podemos hacer auto-posicionamiento en esta bandeja." @@ -2555,7 +2901,7 @@ msgid "" "Arranging is done but there are unpacked items. Reduce spacing and try again." msgstr "" "El posicionamiento está hecho, pero hay artículos sin empaquetar. Reduzca el " -"espacio y vuelva a intentarlo." +"espaciado y vuelva a intentarlo." msgid "Arranging done." msgstr "Organización terminada." @@ -2577,15 +2923,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Todos los objetos seleccionados están en la bandeja bloqueada,\n" "No podemos hacer auto-orientación en estos objetos." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Esta bandeja está bloqueada,\n" "No podemos hacer auto-orientación en esta bandeja." @@ -2624,7 +2970,7 @@ msgid "Login failed" msgstr "Fallo en el inicio de sesión" msgid "Please check the printer network connection." -msgstr "Por favor, compruebe la conexión de área local." +msgstr "Por favor, compruebe la conexión de red de la impresora." msgid "Abnormal print file data. Please slice again." msgstr "Datos de archivo de impresión anormales. Vuelva a laminar." @@ -2642,7 +2988,7 @@ msgstr "" "Ha fallado la conexión con el servicio de la nube. Por favor, inténtelo de " "nuevo." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "" "No se ha encontrado el archivo de impresión; por favor, lamine de nuevo." @@ -2663,7 +3009,7 @@ msgstr "" msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Compruebe el estado actual del servidor Bambú haciendo clic en el enlace " +"Compruebe el estado actual del servidor Bambu haciendo clic en el enlace " "anterior." msgid "" @@ -2673,7 +3019,7 @@ msgstr "" "El tamaño del archivo de impresión es demasiado grande. Ajuste el tamaño del " "archivo e inténtalo de nuevo." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Archivo de impresión no encontrado; por favor, lamínelo de nuevo y envíelo " "para imprimir." @@ -2713,21 +3059,58 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Enviado correctamente. Se cargará la siguiente página en %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Se necesita insertar una tarjeta SD antes de imprimir vía red local." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "Enviando el archivo de G-Code vía red local" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Enviando el archivo de G-Code a la tarjeta SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" -msgstr "Envío exitoso. Cierre la página actual en %s s" +msgstr "Envío exitoso. Cerrando la página actual en %s s" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Se necesita insertar una tarjeta SD antes de enviar a la impresora." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Importando archivo SLA" @@ -2737,7 +3120,7 @@ msgid "" "printer preset first before importing that SLA archive." msgstr "" "El SLA importado no contiene ningún perfil. Por favor active algunos " -"perfiles de la impresora primero antes de importar ese archivo SLA." +"perfiles de impresora SLA antes de importar ese archivo SLA." msgid "Importing canceled." msgstr "Importación cancelada." @@ -2767,10 +3150,10 @@ msgstr "Descargando" msgid "Download failed" msgstr "Descarga fallida" -msgid "Cancelled" +msgid "Canceled" msgstr "Cancelado" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Instalación exitosa." msgid "Installing" @@ -2794,8 +3177,8 @@ msgstr "Snapmaker Orca está licenciada sobre" msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, versión 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca se basa en PrusaSlicer y BambuStudio" msgid "Libraries" msgstr "Librerías" @@ -2811,9 +3194,6 @@ msgstr "" msgid "About %s" msgstr "Acerca de %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca está basado en BambuStudio, PrusaSlicer, y SuperSlicer." @@ -2844,9 +3224,6 @@ msgstr "Confirmar" msgid "Close" msgstr "Cerrar" -msgid "Colour" -msgstr "Color" - msgid "" "Nozzle\n" "Temperature" @@ -2867,10 +3244,6 @@ msgstr "El valor de entrada debe ser mayor que %1% y menor que %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"Ajustes de información de ranura AMS mientras la impresión no tenga soportes" - msgid "Factors of Flow Dynamics Calibration" msgstr "Factores de Calibración de Dinámicas de Flujo" @@ -2883,6 +3256,10 @@ msgstr "Factor K" msgid "Factor N" msgstr "Factor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"Ajustes de información de ranura AMS mientras la impresión no tenga soportes" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "Ajuste de información de ranura Virtual mientras la impresión no sea " @@ -2902,6 +3279,15 @@ msgstr "Por favor, introduzca un valor válido (K in %.1f~%.1f)" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Introduzca un valor válido (K en %.1f~%.1f, N en %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Otro color" @@ -2922,7 +3308,7 @@ msgstr "" "filamento." msgid "Nozzle Diameter" -msgstr "Diámetro" +msgstr "Diámetro de boquilla" msgid "Bed Type" msgstr "Tipo de Cama" @@ -2936,15 +3322,9 @@ msgstr "Temperatura de Cama" msgid "Max volumetric speed" msgstr "Velocidad volumétrica máxima" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Temperatura de cama" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Iniciar calibración" @@ -2986,14 +3366,79 @@ msgstr "Calibración Dinámica de Flujo" msgid "Step" msgstr "Paso" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "Ranuras AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Externo" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Boquilla" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Nota: Solo las ranuras AMS cargadas con el mismo tipo de material se pueden " -"seleccionar." msgid "Enable AMS" msgstr "Activar AMS" @@ -3007,22 +3452,19 @@ msgstr "Desactivar AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Imprimir con el filamento montado en la parte posterior del chasis" -msgid "Current Cabin humidity" -msgstr "Humedad de cabina actual" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Cambie el desecante cuando esté demasiado húmedo. El indicador puede no ser " -"preciso en los siguientes casos: cuando la tapa está abierta o al paquete de " -"desecante. Este tarda horas en absorber la humedad, y las bajas temperaturas " -"también ralentizan el proceso." +"preciso en los siguientes casos: cuando la tapa está abierta o se cambia el " +"paquete de desecante. Este tarda horas en absorber la humedad, y las bajas " +"temperaturas también ralentizan el proceso." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Configurar qué ranura AMS debe utilizarse para un filamento utilizado en el " "trabajo de impresión." @@ -3043,12 +3485,21 @@ msgid "Print using materials mounted on the back of the case" msgstr "" "Imprimir usando materiales montados en la parte de atrás de la cubierta" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Imprimir usando filamentos en AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Imprimir con filamentos montados en la parte de atrás del chasis" +msgid "Auto Refill" +msgstr "Auto Rellenado" + +msgid "Left" +msgstr "Izquierda" + +msgid "Right" +msgstr "Derecha" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3056,28 +3507,31 @@ msgstr "" "Cuando se termine el filamento actual, la impresora continuará imprimiendo " "en el siguiente orden." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Agrupar" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "La impresora no soporta auto recarga actualmente." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"La copia de seguridad de filamento AMS no está activada, por favor actívela " -"en la configuración AMS." +"La auto-reemplazo de filamento de AMS no está activada, por favor actívela " +"en la configuración de AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Si hay dos filamentos idénticos en AMS, se habilitará la copia de seguridad " -"de filamentos AMS. \n" -"(Actualmente admite el suministro automático de consumibles con la misma " -"marca, tipo de material y color)." msgid "DRY" msgstr "SECO" @@ -3096,10 +3550,10 @@ msgid "" "new Bambu Lab filament. This takes about 20 seconds." msgstr "" "El AMS leerá automáticamente la información del filamento al insertar un " -"nuevo filamento de Bambu Lab. Esto tardara unos 20 segundos." +"nuevo filamento de Bambu Lab. Esto tardará unos 20 segundos." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Nota: si se inserta un nuevo filamento durante la impresión, el AMS no leerá " @@ -3117,8 +3571,8 @@ msgstr "Actualización al encender" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "El AMS leerá automáticamente la información del filamento insertado al " "arrancar. Tomará aproximadamente 1 minuto. El proceso de lectura hará rodar " @@ -3137,32 +3591,28 @@ msgid "Update remaining capacity" msgstr "Actualizar capacidad restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"El AMS estimará la capacidad del filamento Bambú restante después de que la " -"información sea actualizada. Durante la impresión, la capacidad restante " -"será actualizada automáticamente." msgid "AMS filament backup" -msgstr "Copia de Seguridad del Filamento AMS" +msgstr "Auto reemplazo de Filamento AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "El AMS continuará con otra bobina con las mismas propiedades de filamento " "automáticamente cuando el filamento se termine" msgid "Air Printing Detection" -msgstr "Detección de Aire en Impresión" +msgstr "Detección de \"Impresión en el aire\"" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detecta los atascos y el rascado de filamento, deteniendo la impresión " +"Detecta los bloquos y el rascado de filamento, deteniendo la impresión " "inmediatamente para ahorrar tiempo y filamento." msgid "File" @@ -3186,7 +3636,7 @@ msgstr "" "o borrado por un antivirus." msgid "click here to see more info" -msgstr "presiona aquí para mostrar más información" +msgstr "Presiona aquí para mostrar más información" msgid "Please home all axes (click " msgstr "Por favor, mandar a inicio todos los ejes (presione " @@ -3208,10 +3658,14 @@ msgstr "" "Se ha producido un error. Tal vez la memoria del sistema no es suficiente o " "es un error del programa" -msgid "Please save project and restart the program. " -msgstr "Guarde el proyecto y reinicie el programa. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Guarde el proyecto y reinicie el programa." + +msgid "Processing G-code from Previous file..." msgstr "Procesando el G-Code del archivo anterior..." msgid "Slicing complete" @@ -3224,13 +3678,13 @@ msgid "Illegal instruction" msgstr "Instrucción ilegal" msgid "Divide by zero" -msgstr "Dividir entre cero" +msgstr "División entre cero" msgid "Overflow" -msgstr "Desbordamiento" +msgstr "Desbordamiento de búfer" msgid "Underflow" -msgstr "Sin flujo" +msgstr "Subdesbordamiento de búfer" msgid "Floating reserved operand" msgstr "Operando reservado flotante" @@ -3244,7 +3698,7 @@ msgstr "Ejecutando scripts de post-procesado" msgid "Successfully executed post-processing script" msgstr "Script de post-procesamiento ejecutado correctamente" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Se produjo un error desconocido durante la exportación del G-Code." #, boost-format @@ -3298,12 +3752,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Archivo de G-Code exportado a %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Error desconocido al exportar el G-Code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3320,225 +3774,6 @@ msgstr "" "Programación de la carga a %1%. Mire la Ventana -> Cola de Impresión del " "Anfitrión" -msgid "Device" -msgstr "Dispositivo" - -msgid "Task Sending" -msgstr "Envío de tareas" - -msgid "Task Sent" -msgstr "Tarea enviada" - -msgid "Edit multiple printers" -msgstr "Editar varias impresoras" - -msgid "Select connected printers (0/6)" -msgstr "Seleccionar impresoras conectadas (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Seleccionar Impresoras Conectadas (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "El número máximo de impresoras que se pueden seleccionar es %d" - -msgid "Offline" -msgstr "Fuera de línea" - -msgid "No task" -msgstr "Sin tareas" - -msgid "View" -msgstr "Vista" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "Editar Impresoras" - -msgid "Device Name" -msgstr "Nombre del dispositivo" - -msgid "Task Name" -msgstr "Nombre de la tarea" - -msgid "Device Status" -msgstr "Estado del dispositivo" - -msgid "Actions" -msgstr "Acciones" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Seleccione aquí los dispositivos que desea gestionar (hasta 6 dispositivos)" - -msgid "Add" -msgstr "Añadir" - -msgid "Idle" -msgstr "Inactivo" - -msgid "Printing" -msgstr "Imprimendo" - -msgid "Upgrading" -msgstr "Actualizando" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "Sincronizando" - -msgid "Printing Finish" -msgstr "Impresión Finalizada" - -msgid "Printing Failed" -msgstr "Impresión fallida" - -msgid "Printing Pause" -msgstr "Pausa de Impresión" - -msgid "Prepare" -msgstr "Preparar" - -msgid "Slicing" -msgstr "Laminando" - -msgid "Pending" -msgstr "Pendiente" - -msgid "Sending" -msgstr "Enviando" - -msgid "Sending Finish" -msgstr "Envío Finalizado" - -msgid "Sending Cancel" -msgstr "Envío Cancelado" - -msgid "Sending Failed" -msgstr "Envío fallido" - -msgid "Print Success" -msgstr "Impresión exitosa" - -msgid "Print Failed" -msgstr "Error de impresión" - -msgid "Removed" -msgstr "Eliminado" - -msgid "Resume" -msgstr "Reanudar" - -msgid "Stop" -msgstr "Detener" - -msgid "Task Status" -msgstr "Estado de la tarea" - -msgid "Sent Time" -msgstr "Hora de envío" - -msgid "There are no tasks to be sent!" -msgstr "No hay tareas que enviar." - -msgid "No historical tasks!" -msgstr "Sin tareas históricas" - -msgid "Loading..." -msgstr "Cargando..." - -msgid "No AMS" -msgstr "Sin AMS" - -msgid "Send to Multi-device" -msgstr "Enviar a multidispositivo" - -msgid "Preparing print job" -msgstr "Preparando el trabajo de impresión" - -msgid "Abnormal print file data. Please slice again" -msgstr "Datos anormales del archivo de impresión. Por favor, lamine de nuevo" - -msgid "There is no device available to send printing." -msgstr "No hay ningún dispositivo disponible para enviar impresiones." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "El número de impresoras en uso simultáneamente no puede ser igual a 0." - -msgid "Use External Spool" -msgstr "Utilizar carrete externo" - -msgid "Use AMS" -msgstr "Usar AMS" - -msgid "Select Printers" -msgstr "Seleccionar impresoras" - -msgid "Ams Status" -msgstr "Estado del AMS" - -msgid "Printing Options" -msgstr "Opciones de impresión" - -msgid "Bed Leveling" -msgstr "Nivelación de la cama" - -msgid "Timelapse" -msgstr "Intervalo" - -msgid "Flow Dynamic Calibration" -msgstr "Calibración Dinámica de Flujo" - -msgid "Send Options" -msgstr "Opciones de envío" - -msgid "Send to" -msgstr "Mandar a" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"impresoras al mismo tiempo.(Depende de cuántos aparatos puedan calentarse al " -"mismo tiempo)." - -msgid "Wait" -msgstr "Espere" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "minuto por tanda. (Depende de lo que tarde en terminar de calentarse)." - -msgid "Send" -msgstr "Enviar" - -msgid "Name is invalid;" -msgstr "El nombre es inválido" - -msgid "illegal characters:" -msgstr "Caracteres no permitidos:" - -msgid "illegal suffix:" -msgstr "sufijo no permitido:" - -msgid "The name is not allowed to be empty." -msgstr "No se permite que el nombre esté vacío." - -msgid "The name is not allowed to start with space character." -msgstr "No se permite que el nombre comience con un espacio." - -msgid "The name is not allowed to end with space character." -msgstr "No se permite que el nombre termine con un espacio." - -msgid "The name length exceeds the limit." -msgstr "La longitud del nombre supera el límite." - msgid "Origin" msgstr "Origen" @@ -3556,7 +3791,7 @@ msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" -"Diámetro de la cama de impresión. Se supone que el origen (0,0) está ubicado " +"Diámetro de la cama de impresión. Se asume que el origen (0,0) está ubicado " "en el centro." msgid "Rectangular" @@ -3611,12 +3846,13 @@ msgstr "Escoge un archivo STL para importar el modelo de la cama de impresión:" msgid "Bed Shape" msgstr "Forma de la cama de impresión" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"La temperatura mínima recomendada es inferior a 190 grados o la temperatura " -"máxima recomendada es superior a 300 grados.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3636,28 +3872,29 @@ msgid "" msgstr "" "La boquilla puede bloquearse cuando la temperatura está fuera del rango " "recomendado.\n" -"Por favor, asegúrese de utilizar la temperatura para imprimir.\n" +"Por favor, asegúrese de que es seguro utilizar esta temperatura para " +"imprimir.\n" "\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"La temperatura recomendada de la boquilla de este tipo de filamento es de " -"[%d, %d] grados centígrados" +"La temperatura recomendada de la boquilla para este tipo de filamento es de " +"[%d, %d] grados Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocidad volumétrica máxima demasiado baja.\n" -"Reajustar a 0.5" +"Restableciendo a 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "La temperatura actual de la cámara es superior a la temperatura de seguridad " @@ -3666,24 +3903,24 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Altura de la capa demasiado pequeña.\n" -"Reajustar a 0,2" +"Restableciendo a 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" -"Espacio de colocación de la plancha demasiado pequeño.\n" -"Reajustar a 0,1" +"Espaciado del alisado demasiado pequeño.\n" +"Restableciendo a 0,1" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" -"La altura de primera capa cero no es válida.\n" +"Una altura 0 en la primera capa no es válida.\n" "\n" "La altura de la primera capa se restablecerá a 0,2." @@ -3720,21 +3957,21 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"El perímetro adicional alternativo no funciona bien cuando el grosor de la " -"cubierta vertical se establece en Todos. " +"Perímetro adicional alternado no funciona bien cuando \"Garantizar el grosor " +"vertical de las cubiertas\" se establece en Todos." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "¿Cambiar estos ajustes automáticamente?\n" -"Sí - Cambie el grosor de la cubierta vertical a Moderado y active el " -"perímetro adicional alternativo\n" -"No - No utilizar el perímetro adicional alternativo" +"Sí - Cambiar \"Garantizar el grosor vertical de las cubiertas\" a Moderado y " +"activar Perímetro adicional alternado\n" +"No - No utilizar Perímetro adicional alternado" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3743,11 +3980,11 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"La torre de purga no funciona cuando la altura de la capa adaptable o la " -"altura de la capa de soporte independiente están activadas.\n" +"La torre de purga no funciona cuando la altura de la capa adaptativa y la " +"altura de capa de soportes independiente están activadas.\n" "¿Qué desea mantener?\n" "SÍ - Mantener la torre de purga\n" -"NO - Mantener la altura de capa adaptable y la altura de capa de soporte " +"NO - Mantener la altura de capa adaptativa y la altura de capa de soportes " "independiente" msgid "" @@ -3758,9 +3995,9 @@ msgid "" msgstr "" "La torre de purga no funciona cuando la altura de capa adaptativa está " "activada.\n" -"¿Qué quieres mantener?\n" +"¿Qué desea mantener?\n" "SÍ - Mantener la torre de purga\n" -"NO - Mantener la altura de capa adaptable" +"NO - Mantener la altura de capa adaptativa" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" @@ -3768,34 +4005,42 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"La torre de purga no funciona cuando la altura de la capa de soporte " +"La torre de purga no funciona cuando la altura de capa de soportes " "independiente está activada.\n" -"¿Qué quieres mantener?\n" +"¿Qué desea mantener?\n" "SÍ - Mantener la torre de purga\n" -"NO - Mantener la altura de la capa de soporte independiente" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Mientras se imprime por objeto, el extrusor puede chocar contra la falda.\n" -"En ese caso, reinicie la capa de falda a 1 para evitarlo." +"NO - Mantener la altura de capa de soportes independiente" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" "seam_slope_start_height debe ser menor que layer_height.\n" -"Reiniciar a 0." +"Restableciendo a 0." + +#, c-format, boost-format +msgid "" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"El modo espiral sólo funciona cuando los bucles de perímetro son 1, el " -"soporte está desactivado, las capas superiores de cubierta son 0, la " -"cantidad de relleno de baja densidad es 0 y el tipo de timelapse es " -"tradicional." msgid " But machines with I3 structure will not generate timelapse videos." msgstr "" @@ -3803,22 +4048,25 @@ msgstr "" "timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"¿Cambiar estos ajustes automáticamente? \n" +"¿Cambiar estos ajustes automáticamente?\n" "Sí - Cambiar estos ajustes y activar el modo espiral automáticamente\n" "No - Dejar de usar el modo espiral esta vez" +msgid "Printing" +msgstr "Imprimiendo" + msgid "Auto bed leveling" msgstr "Nivelación de cama automática" msgid "Heatbed preheating" msgstr "Precalentamiento de la cama" -msgid "Sweeping XY mech mode" -msgstr "Barrido en XY modo mecánico" +msgid "Vibration compensation" +msgstr "Compensación de Vibraciones" msgid "Changing filament" msgstr "Cambiando el filamento" @@ -3826,14 +4074,14 @@ msgstr "Cambiando el filamento" msgid "M400 pause" msgstr "Pausa M400" -msgid "Paused due to filament runout" -msgstr "Pausa por agotamiento del filamento" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Calentando boquilla" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Calibrando la extrusión" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Escaneando la superficie de la cama" @@ -3856,82 +4104,138 @@ msgstr "Limpiando la boquilla" msgid "Checking extruder temperature" msgstr "Comprobando la temperatura del extrusor" -msgid "Printing was paused by the user" -msgstr "El usuario ha interrumpido la impresión" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pausa al caer la cubierta frontal" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Calibrando Micro Lidar" -msgid "Calibrating extrusion flow" -msgstr "Calibrando el flujo de extrusión" - -msgid "Paused due to nozzle temperature malfunction" +msgid "Calibrating flow ratio" msgstr "" -"Pausado debido a un mal funcionamiento de la temperatura de la boquilla" -msgid "Paused due to heat bed temperature malfunction" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" + +msgid "Pause (heatbed temperature malfunction)" msgstr "" -"Se ha interrumpido debido a un mal funcionamiento de la temperatura de la " -"cama caliente" msgid "Filament unloading" msgstr "Descarga de filamento" -msgid "Skip step pause" -msgstr "Saltar paso pausa" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Carga de filamento" -msgid "Motor noise calibration" -msgstr "Calibración de ruido de motor" +msgid "Motor noise cancellation" +msgstr "Cancelación de Ruido de Motor" -msgid "Paused due to AMS lost" -msgstr "Se ha pausado por la pérdida del AMS" - -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (AMS offline)" msgstr "" -"En pausa debido a la baja velocidad del ventilador de disipación de calor" -msgid "Paused due to chamber temperature control error" -msgstr "Pausado debido a un error en el control de temperatura de cámara" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" + +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" -msgstr "Cámara de ventilación" +msgstr "Enfriando cámara" -msgid "Paused by the Gcode inserted by user" -msgstr "Pausado debido a un G-Code de usuario" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Ruido notable del motor" -msgid "Nozzle filament covered detected pause" -msgstr "Pausa de detección de filamento de boquilla cubierta" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pausa de error de cortador" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Pausa de error de primera capa" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pausa de obstrucción de boquilla" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Desconocido" -msgid "Fatal" -msgstr "Fatal" - -msgid "Serious" -msgstr "En serio" - -msgid "Common" -msgstr "Común" - msgid "Update successful." msgstr "Actualización exitosa." @@ -3944,34 +4248,57 @@ msgstr "Verificación fallida." msgid "Update failed." msgstr "Actualización fallida." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"La temperatura actual de la cámara o la temperatura objetivo de la cámara " -"excede en 45℃. Para evitar la obstrucción del extrusor,no se permite cargar " -"filamento de baja temperatura(PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"El filamento de baja temperatura (PLA/PETG/TPU) se carga en el extrusor y, " -"para evitar que se atasque, no se permite ajustar la temperatura de la " -"cámara por encima de 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" -"Cuando usted fija la temperatura de la cámara debajo de 40℃, el control de " -"la temperatura de la cámara no será activado. Y la temperatura objetivo de " +"Cuando se ajusta la temperatura de la cámara por debajo de 40℃, el control " +"de la temperatura de la cámara no será activado. La temperatura objetivo de " "la cámara se ajustará automáticamente a 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Fallo iniciando el trabajo de impresión" msgid "" @@ -3981,36 +4308,82 @@ msgstr "" "actualmente" msgid "Current flowrate cali param is invalid" -msgstr "El parámetro de flujo actual no es válido" +msgstr "El parámetro actual de calibración de flujo no es válido" msgid "Selected diameter and machine diameter do not match" msgstr "El diámetro seleccionado y el diámetro de la máquina no coinciden" -msgid "Failed to generate cali gcode" -msgstr "Fallo al generar el G-Code cali" +msgid "Failed to generate cali G-code" +msgstr "Fallo al generar el G-Code de calibración" msgid "Calibration error" msgstr "Error de calibración" -msgid "TPU is not supported by AMS." -msgstr "TPU no soportado por el AMS." +msgid "Resume Printing" +msgstr "Continuar Imprimiendo" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF no soportado por el AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"El PVA húmedo se hará más flexible y se atascará dentro del AMS, por favor, " -"tenga cuidado de secarlo antes de usar." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Dejar de imprimir" + +msgid "Check Assistant" +msgstr "Asistente de Pruebas" + +msgid "Filament Extruded, Continue" +msgstr "Filamento extruido, Continuar" + +msgid "Not Extruded Yet, Retry" +msgstr "Aún no extruido, reintentar" + +msgid "Finished, Continue" +msgstr "Terminado, Continuar" + +msgid "Load Filament" +msgstr "Cargar filamento" + +msgid "Filament Loaded, Resume" +msgstr "Filamento cargado, reanudar" + +msgid "View Liveview" +msgstr "Ver Vista en Directo" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Hecho" + +msgid "Retry" +msgstr "Reintentar" + +msgid "Resume" +msgstr "Reanudar" + +msgid "Unknown error." msgstr "" -"Los filamentos CF/GF son duros y quebradizos. Es fácil romperlos o crear " -"atascos en el AMS, por favor úselos con precaución." msgid "default" msgstr "por defecto" @@ -4024,7 +4397,7 @@ msgstr "" "Marcadores de posición incorporados (haga doble clic en el elemento para " "añadirlo al G-Code)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Buscar marcadores de posición G-Code" msgid "Add selected placeholder to G-code" @@ -4074,7 +4447,7 @@ msgid "Filament settings" msgstr "Ajustes del filamento" msgid "SLA Materials settings" -msgstr "SLA Configuración de los Materiales" +msgstr "Configuración de los Materiales SLA" msgid "Printer settings" msgstr "Ajustes de la impresora" @@ -4083,7 +4456,7 @@ msgid "parameter name" msgstr "nombre del parámetro" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s no puede ser un porcentaje" #, c-format, boost-format @@ -4122,24 +4495,38 @@ msgid "Input value is out of range" msgstr "Valor de entrada fuera de rango" msgid "Some extension in the input is invalid" -msgstr "Alguna extensión de la entrada no es válida" +msgstr "Alguna extensión en la entrada no es válida" + +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Formato inválido. Formato de vector esperado: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Altura de la capa" msgid "Line Width" -msgstr "Ancho de extrusión" +msgstr "Ancho de línea" msgid "Fan Speed" msgstr "Velocidad del ventilador" -msgid "Temperature" -msgstr "Temperatura" - msgid "Flow" msgstr "Flujo" @@ -4173,8 +4560,8 @@ msgstr "Velocidad del Ventilador: " msgid "Temperature: " msgstr "Temperatura: " -msgid "Loading G-codes" -msgstr "Carga de G-Codes" +msgid "Loading G-code" +msgstr "Cargando G-Code" msgid "Generating geometry vertex data" msgstr "Generación de datos de vértices de la geometría" @@ -4206,6 +4593,72 @@ msgstr "Tiempo total" msgid "Total cost" msgstr "Costo total" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Consejos:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Consejos" + msgid "up to" msgstr "hasta" @@ -4215,23 +4668,17 @@ msgstr "sobre" msgid "from" msgstr "desde" -msgid "Color Scheme" -msgstr "Esquema de colores" - msgid "Time" msgstr "Tiempo" -msgid "Percent" -msgstr "Porcentaje" - -msgid "Used filament" -msgstr "Filamento usado" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Altura de la capa (mm)" msgid "Line Width (mm)" -msgstr "Ancho de extrusión (mm)" +msgstr "Ancho de línea (mm)" msgid "Speed (mm/s)" msgstr "Velocidad (mm/s)" @@ -4246,22 +4693,22 @@ msgid "Volumetric flow rate (mm³/s)" msgstr "Tasa de flujo volumétrico (mm³/seg)" msgid "Travel" -msgstr "Recorrido" +msgstr "Desplazamientos" msgid "Seams" msgstr "Costuras" msgid "Retract" -msgstr "Plegar" +msgstr "Retracciones" msgid "Unretract" -msgstr "Desplegar" +msgstr "Des-retracción" msgid "Filament Changes" msgstr "Cambios de filamento" msgid "Wipe" -msgstr "Limpiar" +msgstr "Purgas" msgid "Options" msgstr "Opciones" @@ -4272,12 +4719,12 @@ msgstr "recorrido" msgid "Extruder" msgstr "Extrusor" -msgid "Filament change times" -msgstr "Tiempos de cambio de filamento" - msgid "Cost" msgstr "Coste" +msgid "Filament change times" +msgstr "Tiempos de cambio de filamento" + msgid "Color change" msgstr "Cambio de color" @@ -4287,10 +4734,7 @@ msgstr "Imprimir" msgid "Printer" msgstr "Impresora" -msgid "Custom g-code" -msgstr "G-Code personalizado" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Cambio de Herramienta" msgid "Time Estimation" @@ -4317,6 +4761,19 @@ msgstr "Cambiar al modo silencioso" msgid "Switch to normal mode" msgstr "Cambiar al modo normal" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Altura de capa variable" @@ -4335,29 +4792,17 @@ msgstr "Radio" msgid "Keep min" msgstr "Mantener el mínimo" -msgid "Left mouse button:" -msgstr "Botón izquierdo del ratón:" - msgid "Add detail" msgstr "Añadir detalle" -msgid "Right mouse button:" -msgstr "Botón derecho del ratón:" - msgid "Remove detail" msgstr "Borrar detalle" -msgid "Shift + Left mouse button:" -msgstr "Shift + botón izquierdo del ratón:" - msgid "Reset to base" msgstr "Volver a la base" -msgid "Shift + Right mouse button:" -msgstr "Shift + Botón derecho del ratón:" - msgid "Smoothing" -msgstr "Suavidad" +msgstr "Suavizado" msgid "Mouse wheel:" msgstr "Rueda del ratón:" @@ -4368,8 +4813,57 @@ msgstr "Incrementar/disminuir el área de edición" msgid "Sequence" msgstr "Secuencia" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" -msgstr "Espejar Objeto" +msgstr "Reflejar Objeto" msgid "Tool Move" msgstr "Herramienta Mover" @@ -4413,17 +4907,31 @@ msgstr "Evitar la zona de calibración del extrusor" msgid "Align to Y axis" msgstr "Alinear con el eje Y" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Añadir" + msgid "Add plate" msgstr "Añadir bandeja" -msgid "Auto orient" -msgstr "Orientar automáticamente" +msgid "Auto orient all/selected objects" +msgstr "Orientar automáticamente todos/seleccionados objetos" + +msgid "Auto orient all objects on current plate" +msgstr "Orientar automáticamente todos los objetos de la bandeja actual" msgid "Arrange all objects" msgstr "Ordenar todos los objetos" msgid "Arrange objects on selected plates" -msgstr "Colocar los objetos en las bandejas seleccionadas" +msgstr "Organizar los objetos en las bandejas seleccionadas" msgid "Split to objects" msgstr "Separar en objetos" @@ -4435,13 +4943,31 @@ msgid "Assembly View" msgstr "Vista de Emsamblado" msgid "Select Plate" -msgstr "Seleccione la Bandeja" +msgstr "Seleccionr Bandeja" + +msgid "Slicing" +msgstr "Laminando" + +msgid "Slice all" +msgstr "Laminar todo" + +msgid "Failed" +msgstr "Error" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" msgid "Assembly Return" msgstr "Volver a agrupar" -msgid "return" -msgstr "volver" +msgid "Return" +msgstr "Volver" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Barra de herramientas de pintura" @@ -4455,6 +4981,9 @@ msgstr "Vista de Sección" msgid "Assemble Control" msgstr "Control de Ensamblado" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Volumen total:" @@ -4469,48 +4998,83 @@ msgstr "Tamaño:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Se han encontrado conflictos de rutas G-Code en la capa %d, z = %.2lf mm. " +"Se han encontrado conflictos de rutas G-Code en la capa %d, Z = %.2lfmm. " "Por favor, separe más los objetos en conflicto (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Un objeto está sobre el límite de la bandeja." msgid "A G-code path goes beyond the max print height." msgstr "Una ruta de G-Code supera la altura máxima de impresión." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Una ruta de G-Code supera el límite de la bandeja." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Sólo es visible el objeto que se está editando." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Un objeto está colocado en el límite de la bandeja o excede el límite de " -"altura.\n" -"Por favor solucione el problema moviéndolo totalmente fuera o dentro de la " -"bandeja, y confirme que la altura está entre el volumen de construcción." msgid "Calibration step selection" msgstr "Seleccionar paso de calibración" msgid "Micro lidar calibration" -msgstr "Calibración Micro Lidar" +msgstr "Calibración de Micro Lidar" msgid "Bed leveling" msgstr "Nivelación de Cama" -msgid "Vibration compensation" -msgstr "Compensación de Vibraciones" - -msgid "Motor noise cancellation" -msgstr "Cancelación de Ruido de Motor" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Programa de calibración" @@ -4563,27 +5127,24 @@ msgstr "Fuente de cámara personalizada" msgid "Show \"Live Video\" guide page." msgstr "Mostrar guía de \"Video En vivo\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Conectar Impresora (LAN)" msgid "Please input the printer access code:" msgstr "Por favor, introduzca el código de acceso a la impresora:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Puede encontrarse en \"Configuración > Red > Código de conexión\"\n" -"en la impresora, como se muestra en la figura:" msgid "Invalid input." -msgstr "Introducción inválida." +msgstr "Entrada inválida." msgid "New Window" msgstr "Nueva Ventana" @@ -4595,14 +5156,20 @@ msgid "Application is closing" msgstr "La aplicación se está cerrando" msgid "Closing Application while some presets are modified." -msgstr "Cerrando la aplicación mientras se modifican algunos perfiles." +msgstr "Cerrando la aplicación tras haber modificado algunos perfiles." msgid "Logging" msgstr "Registrando" +msgid "Prepare" +msgstr "Preparar" + msgid "Preview" msgstr "Previsualización" +msgid "Device" +msgstr "Dispositivo" + msgid "Multi-device" msgstr "Multi-dispositivo" @@ -4624,17 +5191,17 @@ msgstr "Laminar bandeja" msgid "Print plate" msgstr "Imprimir bandeja" -msgid "Slice all" -msgstr "Laminar todo" - msgid "Export G-code file" msgstr "Exportar archivo G-Code" +msgid "Send" +msgstr "Enviar" + msgid "Export plate sliced file" -msgstr "Explorar archivo laminado" +msgstr "Exportar los objetos laminados de la bandeja a un archivo" msgid "Export all sliced file" -msgstr "Exportar todos los archivos laminados" +msgstr "Exportar todos los objetos laminados a un archivo" msgid "Print all" msgstr "Imprimir todo" @@ -4642,6 +5209,9 @@ msgstr "Imprimir todo" msgid "Send all" msgstr "Mandar todo" +msgid "Send to Multi-device" +msgstr "Enviar a multidispositivo" + msgid "Keyboard Shortcuts" msgstr "Atajos de teclado" @@ -4676,10 +5246,6 @@ msgstr "Descargar Modelos" msgid "Default View" msgstr "Vista por Defecto" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Superior" - msgid "Top View" msgstr "Vista superior" @@ -4702,15 +5268,9 @@ msgstr "Trasera" msgid "Rear View" msgstr "Vista trasera" -msgid "Left" -msgstr "Izquierda" - msgid "Left View" msgstr "Vista izquierda" -msgid "Right" -msgstr "Derecha" - msgid "Right View" msgstr "Vista derecha" @@ -4726,8 +5286,8 @@ msgstr "Empezar un nuevo proyecto" msgid "Open a project file" msgstr "Abrir un archivo de proyecto" -msgid "Recent projects" -msgstr "Proyectos recientes" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Guardar proyecto" @@ -4738,9 +5298,6 @@ msgstr "Guardar el proyecto actual en un archivo" msgid "Save Project as" msgstr "Guardar proyecto como" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Guardar el proyecto actual como" @@ -4774,14 +5331,14 @@ msgstr "Exportar todos los objetos como varios STL" msgid "Export Generic 3MF" msgstr "Exportar 3MF genérico" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exporte el archivo 3mf sin usar algunas de las extensiones" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exporte el archivo 3MF sin usar algunas de las extensiones." msgid "Export current sliced file" -msgstr "Exportar archivo laminado actual" +msgstr "Exportar la bandeja activa laminada a un archivo" msgid "Export all plate sliced file" -msgstr "Exportar todo el archivo de bandeja laminada" +msgstr "Exportar todas las bandejas laminadas a un archivo" msgid "Export G-code" msgstr "Exportar G-Code" @@ -4789,6 +5346,9 @@ msgstr "Exportar G-Code" msgid "Export current plate as G-code" msgstr "Exportar bandeja actual cómo G-Code" +msgid "Export toolpaths as OBJ" +msgstr "Exportar trayectorias de herramientas como OBJ" + msgid "Export Preset Bundle" msgstr "Exportar Paquete de Perfiles" @@ -4835,11 +5395,17 @@ msgid "Deletes all objects" msgstr "Borra todos los objetos" msgid "Clone selected" -msgstr "Clon seleccionado" +msgstr "Clonar la selección" msgid "Clone copies of selections" msgstr "Clonar copias de selecciones" +msgid "Duplicate Current Plate" +msgstr "Duplicar Placa Actual" + +msgid "Duplicate the current plate" +msgstr "Duplicar la placa actual" + msgid "Select all" msgstr "Seleccionar Todo" @@ -4858,17 +5424,25 @@ msgstr "Utilizar Vista en Perspectiva" msgid "Use Orthogonal View" msgstr "Utilizar Vista Octogonal" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "Mostrar Ventana &G-Code" -msgid "Show g-code window in Previce scene" -msgstr "Mostrar ventana de G-Code en escena previa" +msgid "Show G-code window in Preview scene." +msgstr "Mostrar ventana de G-Code en Vista previa." msgid "Show 3D Navigator" msgstr "Mostrar Navegador 3D" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Mostrar navegador 3D en escena Preparar y Vista previa" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Mostrar navegador 3D en escena Preparar y Vista previa." msgid "Reset Window Layout" msgstr "Reiniciar Diseño de Ventana" @@ -4879,18 +5453,27 @@ msgstr "Restablecer el diseño de ventana por defecto" msgid "Show &Labels" msgstr "Mostrar Etiquetas(&L)" -msgid "Show object labels in 3D scene" -msgstr "Mostrar etiquetas en escena 3D" +msgid "Show object labels in 3D scene." +msgstr "Mostrar etiquetas en escena 3D." msgid "Show &Overhang" msgstr "Mostrar Voladizo (&O)" -msgid "Show object overhang highlight in 3D scene" -msgstr "Mostrar resalte de voladizos de objeto en escena 3D" +msgid "Show object overhang highlight in 3D scene." +msgstr "Mostrar resalte de voladizos de objeto en escena 3D." + +msgid "Show Selected Outline (beta)" +msgstr "Mostrar Contorno Seleccionado (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D." msgid "Preferences" msgstr "Preferencias" +msgid "View" +msgstr "Vista" + msgid "Help" msgstr "Ayuda" @@ -4909,6 +5492,18 @@ msgstr "Paso 2" msgid "Flow rate test - Pass 2" msgstr "Test de Flujo - Paso 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (recomendado)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Calibración de flujo YOLO de Orca, incrementos de 0,01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (versión perfeccionista)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Calibración de flujo YOLO de Orca, incrementos de 0,005" + msgid "Flow rate" msgstr "Test de Flujo" @@ -4918,27 +5513,33 @@ msgstr "Avance de Presión Lineal" msgid "Retraction test" msgstr "Test de Retracciones" -msgid "Orca Tolerance Test" -msgstr "Test de Tolerancia Orca" - msgid "Max flowrate" msgstr "Test de Flujo Máximo" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Más..." - msgid "Tutorial" msgstr "Tutorial" msgid "Calibration help" msgstr "Ayuda de calibración" -msgid "More calibrations" -msgstr "Más calibraciones" - msgid "&Open G-code" msgstr "Abrir G-Code (&O)" @@ -4954,9 +5555,6 @@ msgstr "Cargar la base del disco" msgid "Export &Toolpaths as OBJ" msgstr "Exportar Movimientos como OBJ (&T)" -msgid "Export toolpaths as OBJ" -msgstr "Exportar trayectorias de herramientas como OBJ" - msgid "Open &Slicer" msgstr "Abrir &Laminador" @@ -4980,17 +5578,20 @@ msgid "&Help" msgstr "Ayuda (&H)" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "Existe un archivo con el mismo nombre: %s, ¿desea sobreescribirlo?." #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "" "Existe una configuración con el mismo nombre: %s, ¿desea sobreescribirla?." msgid "Overwrite file" msgstr "Sobrescribir archivo" +msgid "Overwrite config" +msgstr "Sobrescribir configuración" + msgid "Yes to All" msgstr "Sí a todo" @@ -5022,10 +5623,10 @@ msgid_plural "" "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "" "Hay %d configuración exportada. (solo configuraciones que no sean del " -"sistema y compatibles)" +"sistema y que sean compatibles)" msgstr[1] "" -"Hay %d configuraciones importadas. (Solo las configuraciones compatibles y " -"no-del-sistema)" +"Hay %d configuraciones importadas. (solo configuraciones que no sean del " +"sistema y que sean compatibles)" msgid "" "\n" @@ -5049,13 +5650,13 @@ msgid "Filament Settings" msgstr "Configuración de Filamento" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"¿Quiere sincronizar sus datos personales desde Bambú Cloud? \n" +"¿Quiere sincronizar sus datos personales desde Bambu Cloud?\n" "Esta contiene la siguiente información:\n" "1. Los Perfiles de Proceso\n" "2. Los Perfiles de Filamento\n" @@ -5091,7 +5692,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "La cámara de la impresora funciona mal." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Se ha producido un problema. Actualice el firmware de la impresora e " "inténtelo de nuevo." @@ -5112,7 +5713,7 @@ msgid "Connection Failed. Please check the network and try again" msgstr "Conexión fallida. Compruebe la red e inténtelo de nuevo" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Compruebe la red e inténtelo de nuevo. Puede reiniciar o actualizar la " @@ -5121,8 +5722,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "La impresora se ha desconectado y no puede conectarse." -msgid "Stopped." -msgstr "Detenido." +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Fallo de Conexión de Red Local (Fallo al iniciar vista en directo)" @@ -5159,6 +5760,9 @@ msgstr "Información" msgid "Playing..." msgstr "Reproduciendo..." +msgid "Loading..." +msgstr "Cargando..." + msgid "Year" msgstr "Año" @@ -5177,17 +5781,20 @@ msgstr "Agrupar archivos por mes, primero los recientes." msgid "Show all files, recent first." msgstr "Mostrar todos los archivos, primero los recientes." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Cambiar a archivos de timelapse." msgid "Video" -msgstr "Video" +msgstr "Vídeo" msgid "Switch to video files." -msgstr "Cambiar a archivos de video." +msgstr "Cambiar a archivos de vídeo." -msgid "Switch to 3mf model files." -msgstr "Cambiar a archivos de modelos 3mf." +msgid "Switch to 3MF model files." +msgstr "Cambiar a archivos de modelos 3MF." msgid "Delete selected files from printer." msgstr "Borrar archivos seleccionados desde la impresora." @@ -5202,7 +5809,7 @@ msgid "Select" msgstr "Seleccionar" msgid "Batch manage files." -msgstr "Arhivos de proceso por lotes." +msgstr "Procesado de archivo por lotes." msgid "Refresh" msgstr "Actualizar" @@ -5213,10 +5820,6 @@ msgstr "Recarga la lista de archivos desde la impresora." msgid "No printers." msgstr "No hay impresoras." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Error de conexión [%d]!" - msgid "Loading file list..." msgstr "Cargando lista de archivos..." @@ -5226,31 +5829,16 @@ msgstr "No hay archivos" msgid "Load failed" msgstr "Carga fallida" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Error de inicialización (conexión del dispositivo no preparada)." - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"La búsqueda de archivos en la tarjeta SD no es compatible con el firmware " -"actual. Actualice el firmware de la impresora." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"Error de inicialización (almacenamiento no disponible, inserte una tarjeta " -"SD)." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Conexión LAN fallida (no se encuentra la tarjeta SD)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -"La búsqueda de archivos en la tarjeta SD no es posible en el modo Sólo LAN." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "¡Fallo al inicializar (%s)!" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5269,7 +5857,7 @@ msgstr "¿Desea eliminar el fichero '%s' de la impresora?" msgid "Delete file" msgstr "Borrar archivo" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Obteniendo información sobre el modelo ..." msgid "Failed to fetch model information from printer." @@ -5279,23 +5867,21 @@ msgid "Failed to parse model information." msgstr "No se pudo analizar la información del modelo." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -"El archivo .gcode. 3mf no contiene datos de G-Code. Por favor, lamine con " +"El archivo .gcode .3mf no contiene datos de G-Code. Por favor, lamine con " "Snapmaker Orca y exporte un nuevo archivo .gcode.3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." -msgstr "¡El archivo '%s' se perdió!\" Por favor, vuelva a descargárselo." +msgstr "¡El archivo '%s' se perdió!\" Por favor, vuelva a descargárlo." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" msgid "Download waiting..." msgstr "Descarga esperando..." @@ -5313,6 +5899,9 @@ msgstr "Descarga finalizada" msgid "Downloading %d%%..." msgstr "Descargando %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5320,6 +5909,9 @@ msgstr "" "Al volver a conectar la impresora, la operación no puede completarse " "inmediatamente, inténtelo de nuevo más tarde." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "El archivo no existe." @@ -5329,13 +5921,47 @@ msgstr "Checksum de archivo erróneo. Por favor, reinténtelo." msgid "Not supported on the current printer version." msgstr "No soportado en la actual versión de la impresora." -msgid "Storage unavailable, insert SD card." -msgstr "Almacenamiento no disponible, inserte la tarjeta SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Código de error: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Velocidad:" @@ -5352,7 +5978,7 @@ msgid "Translation/Zoom" msgstr "Conversión/Zoom" msgid "3Dconnexion settings" -msgstr "Ajustes de conexión 3D" +msgstr "Ajustes de 3DConnexion" msgid "Swap Y/Z axes" msgstr "Intercambiar los ejes Y/Z" @@ -5375,11 +6001,84 @@ msgstr "Invertir eje de Cabeceo" msgid "Invert Roll axis" msgstr "Invertir eje de Balanceo" +msgid "(LAN)" +msgstr "(Red local)" + +msgid "Search" +msgstr "Buscar" + +msgid "My Device" +msgstr "Mi dispositivo" + +msgid "Other Device" +msgstr "Otro dispositivo" + +msgid "Online" +msgstr "En línea" + +msgid "Input access code" +msgstr "Introducir el código de acceso" + +msgid "Can't find my devices?" +msgstr "¿No puedo encontrar mis dispositivos?" + +msgid "Log out successful." +msgstr "Cierre de sesión con éxito." + +msgid "Offline" +msgstr "Fuera de línea" + +msgid "Busy" +msgstr "Ocupado" + +msgid "Modifying the device name" +msgstr "Modificar el nombre del dispositivo" + +msgid "Name is invalid;" +msgstr "El nombre es inválido" + +msgid "illegal characters:" +msgstr "Caracteres no permitidos:" + +msgid "illegal suffix:" +msgstr "sufijo no permitido:" + +msgid "The name is not allowed to be empty." +msgstr "No se permite que el nombre esté vacío." + +msgid "The name is not allowed to start with space character." +msgstr "No se permite que el nombre comience con un espacio." + +msgid "The name is not allowed to end with space character." +msgstr "No se permite que el nombre termine con un espacio." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Vincular con código PIN" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Progreso de impresión" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Detener" msgid "Layer: N/A" msgstr "Capa: N/A" @@ -5410,8 +6109,8 @@ msgstr "Valorar" msgid "Camera" msgstr "Cámara" -msgid "SD Card" -msgstr "Tarjeta SD" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Ajuste de Cámara" @@ -5428,35 +6127,41 @@ msgstr "Partes de la Impresora" msgid "Print Options" msgstr "Opciones de Impresora" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Luz" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Costura" - msgid "Bed" msgstr "Cama" msgid "Debug Info" msgstr "Información de Depuración" -msgid "No SD Card" -msgstr "Sin tarjeta SD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "Tarjeta SD Anormal" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Cancelar Impresión" -msgid "Are you sure you want to cancel this print?" -msgstr "¿Está seguro que desea cancelar esta impresión?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "La impresora está ocupada con otro trabajo de impresión." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Descargando…" @@ -5466,7 +6171,7 @@ msgstr "Laminado en la Nube..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "Hay %s tareas por delante, en la Cola de Laminado en la Nube." +msgstr "En Cola de Laminado en la Nube, hay %s tareas por delante, " #, c-format, boost-format msgid "Layer: %s" @@ -5477,17 +6182,15 @@ msgid "Layer: %d/%d" msgstr "Capa: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Por favor, caliente la boquilla por encima de 170 grados antes de cargar o " +"Por favor, caliente la boquilla por encima de 170°C antes de cargar o " "descargar filamento." -msgid "Still unload" -msgstr "Aún descargado" - -msgid "Still load" -msgstr "Aún cargado" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Seleccione una ranura AMS antes de la calibración" @@ -5497,14 +6200,13 @@ msgid "" "unload the filament and try again." msgstr "" "No se puede leer la información del filamento: el filamento está cargado en " -"el cabezal de la herramienta, por favor, descargue el filamento y vuelva a " -"intentarlo." +"el cabezal, por favor, descargue el filamento y vuelva a intentarlo." msgid "This only takes effect during printing" msgstr "Esto solo tendrá efecto durante la impresión" msgid "Silent" -msgstr "Silencio" +msgstr "Silencioso" msgid "Standard" msgstr "Estándar" @@ -5513,10 +6215,21 @@ msgid "Sport" msgstr "Deportivo" msgid "Ludicrous" -msgstr "Lúdico" +msgstr "Rídiculamente rápido" -msgid "Can't start this without SD card." -msgstr "No puede iniciarse sin una tarjeta SD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Valorar el Perfil de Impresión" @@ -5539,13 +6252,10 @@ msgstr "Aceptar" msgid "Please click on the star first." msgstr "Por favor presione en las estrellas primero." -msgid "InFo" -msgstr "Información" - msgid "Get oss config failed." msgstr "Falló la obtención de la configuración de oss." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Cargar Imágenes" msgid "Number of images successfully uploaded" @@ -5560,7 +6270,7 @@ msgstr " Error en la carga de configuración\n" msgid " No corresponding storage bucket\n" msgstr " Sin cubo de almacenamiento correspondiente\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " no es posible abrirlo\n" msgid "" @@ -5586,8 +6296,9 @@ msgstr "Carga fallida\n" msgid "obtaining instance_id failed\n" msgstr "Error al obtener instance_id \n" +#, fuzzy msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5602,15 +6313,15 @@ msgstr "Mensaje de error: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" -"¿Desea redirigir a la página web de valoración?" +"¿Desea redirigir a la página web para la valoración?" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Algunas de sus imágenes no se han podido cargar. ¿Desea redirigir a la " "página web para la valoración?" @@ -5620,7 +6331,7 @@ msgstr "Puede seleccionar hasta 16 imágenes." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Se requiere al menos un registro de impresión correcto de este perfil de " "impresión \n" @@ -5629,12 +6340,22 @@ msgstr "" msgid "Status" msgstr "Estado" +msgctxt "Firmware" msgid "Update" -msgstr "Actualizar" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "No mostrar de nuevo" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s error" @@ -5662,31 +6383,31 @@ msgstr "%s información" msgid "Skip" msgstr "Saltar" -msgid "Newer 3mf version" -msgstr "Nueva versión 3mf" +msgid "Newer 3MF version" +msgstr "Nueva versión 3MF" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" -"La versión del archivo 3mf está en Beta y es más reciente que la versión " +"La versión del archivo 3MF está en Beta y es más reciente que la versión " "actual de Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "Si desea probar Snapmaker Orca Beta, puede hacer clic en" +msgstr "Si desea probar Snapmaker Orca Beta, puede hacer clic para" msgid "Download Beta Version" -msgstr "Descargar versión beta" +msgstr "Descargar la versión beta" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -"La versión del archivo 3mf es más reciente que la versión actual de Orca " +"La versión del archivo 3MF es más reciente que la versión actual de Orca " "Slicer." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Actualice su Snapmaker Orca podría habilitar toda la funcionalidad en el " -"archivo 3mf." +"Actualizar Snapmaker Orca podría habilitar toda la funcionalidad en el archivo " +"3MF." msgid "Current Version: " msgstr "Versión actual: " @@ -5694,9 +6415,32 @@ msgstr "Versión actual: " msgid "Latest Version: " msgstr "Ultima versión: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "No por ahora" +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" + msgid "3D Mouse disconnected." msgstr "Ratón 3D desconectado." @@ -5759,9 +6503,15 @@ msgstr[1] "%1$d Los objetos tienen pintura de color." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d El objeto se ha cargado como parte del objeto de corte." -msgstr[1] "%1$d Los objetos se han cargado como partes del objeto de corte" +msgstr[1] "%1$d Los objetos se han cargado como partes del objeto de corte." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" msgid "ERROR" msgstr "ERROR" @@ -5784,14 +6534,14 @@ msgstr "Error:" msgid "Warning:" msgstr "Advertencia:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Exportación exitosa." msgid "Model file downloaded." msgstr "Archivo de modelo descargado." msgid "Serious warning:" -msgstr "Seria advertencia:" +msgstr "Advertencia grave:" msgid " (Repair)" msgstr " (Reparación)" @@ -5802,19 +6552,19 @@ msgstr " Presiona aquí para instalarlo." msgid "WARNING:" msgstr "AVISO:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "¡Su modelo necesita soporte! Por favor, haga que el material de apoyo esté " "habilitado." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Superposición de la ruta del G-Code" msgid "Support painting" msgstr "Soporte pintado" msgid "Color painting" -msgstr "Pintura en color" +msgstr "Pintado de color" msgid "Cut connectors" msgstr "Cortar Conectores" @@ -5857,12 +6607,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" -msgid "Enable AI monitoring of printing" -msgstr "Activar monitorización por IA de la impresión" - -msgid "Sensitivity of pausing is" -msgstr "La sensibilidad de pausa es" - msgid "Enable detection of build plate position" msgstr "Activar detección de posición de bandeja" @@ -5871,7 +6615,50 @@ msgid "" "the tag is not in predefined range." msgstr "" "Se detecta la etiqueta de localización de la bandeja y se detiene la " -"impresión si la etiqueta no se encuentra dentro del intervalo predefinido." +"impresión si la etiqueta no se encuentra dentro del rango predefinido." + +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Activar monitorización por IA de la impresión" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "Detección de hilos" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Detección de Atascos de Boquilla" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" msgid "First Layer Inspection" msgstr "Inspección de Primera Capa" @@ -5879,15 +6666,29 @@ msgstr "Inspección de Primera Capa" msgid "Auto-recovery from step loss" msgstr "Autorecuperar desde pérdida de paso" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Permitir Sonido de Aviso" msgid "Filament Tangle Detect" msgstr "Detección de Enredos de Filamentos" -msgid "Nozzle Clumping Detection" -msgstr "Detección de Atascos de Boquilla" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Compruebe si la boquilla está atascada por el filamento u otros objetos " @@ -5896,15 +6697,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Tipo de Boquilla" -msgid "Stainless Steel" -msgstr "Acero Inoxidable" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Acero endurecido" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Acero Inoxidable" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Global" @@ -5939,15 +6754,43 @@ msgstr "Desbloquear bandeja actual" msgid "Lock current plate" msgstr "Bloquear bandeja actual" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "Editar el nombre de la bandeja actual" msgid "Move plate to the front" -msgstr "" +msgstr "Mover bandeja al frente" msgid "Customize current plate" msgstr "Personalizar bandeja actual" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " bandeja %1%:" @@ -5976,14 +6819,67 @@ msgstr "Tiempo estimado" msgid "Filament changes" msgstr "Cambios de filamento" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Click para cambiar el ajuste inicial" msgid "Connection" msgstr "Conexión" -msgid "Bed type" -msgstr "Tipo de cama" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Volúmenes de limpieza" @@ -6004,48 +6900,30 @@ msgid "Search plate, object and part." msgstr "Buscar bandeja, objeto y parte." msgid "Pellets" +msgstr "Pellets" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "" -"No hay filamentos AMS. Por favor, seleccione una impresora en la página " -"'Dispositivos' para cargar información AMS." +msgid "There are no compatible filaments, and sync is not performed." +msgstr "No hay filamentos compatibles, y no se ha realizado la sincronización." msgid "Sync filaments with AMS" msgstr "Sincronizar filamentos con AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Sincronizar filamentos con AMS descartará todos los perfiles de filamento y " -"colores. ¿Desea continuar?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Se realizó la sincronización, ¿Desea sincronizar solo los cambios o " -"resincronizar todo?" - -msgid "Sync" -msgstr "Sincronizar" - -msgid "Resync" -msgstr "Resincronizar" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "No hay filamentos compatibles, y no se ha realizado la sincronización." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Hay algunos filamentos desconocidos mapeados en el perfil genérico. Por " -"favor actualice o reinicie Snapmaker Orca para comprobar si hay una " -"actualización de perfiles del sistema." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6053,15 +6931,15 @@ msgstr "¿Quieres guardar los cambios en \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" -"Desmontado correctamente. El dispositivo %s(%s) ahora puede ser eliminado de " +"Desmontado correctamente. El dispositivo %s(%s) ahora puede ser extraído de " "forma segura." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "La expulsión del dispositivo %s(%s) ha fallado." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "" @@ -6086,7 +6964,7 @@ msgid "" msgstr "" "La dureza de la boquilla requerida por el filamento es más alta que la " "dureza de la boquilla por defecto de la impresora. Por favor, reemplace la " -"boquilla endurecida y el filamento, de otra forma, la boquilla se atascará o " +"boquilla endurecida o el filamento, de otra forma, la boquilla se atascará o " "se dañará." msgid "" @@ -6096,28 +6974,47 @@ msgstr "" "Activar la fotografía timelapse tradicional puede causar imperfecciones en " "la superficie. Se recomienda cambiar al modo suave." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Expandir barra lateral" msgid "Collapse sidebar" msgstr "Colapsar barra lateral" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Cargando archivo: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "El 3mf no es de Snapmaker Orca, cargar datos de geometría solo." +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "El 3MF no es de Snapmaker Orca, cargando sólo datos de geometría." -msgid "Load 3mf" -msgstr "Cargar 3mf" +msgid "Load 3MF" +msgstr "Cargar 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"La versión de 3mf %s es más nueva que la versión de %s %s, encontradas las " +"La versión de 3MF %s es más nueva que la versión de %s %s, encontradas las " "siguientes llaves no reconocidas:" msgid "You'd better upgrade your software.\n" @@ -6125,40 +7022,52 @@ msgstr "Debería actualizar el software.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"La versión de 3mf %s es más nueva que la versión de %s %s. Se aconseja " +"La versión de 3MF %s es más nueva que la versión de %s %s. Se aconseja " "actualizar su software." -msgid "Invalid values found in the 3mf:" -msgstr "Valores inválidos encontrados en el 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"El 3MF está generado por un Snapmaker Orca antiguo, cargar solo datos de " +"geometría." + + +msgid "Invalid values found in the 3MF:" +msgstr "Valores inválidos encontrados en el 3MF:" msgid "Please correct them in the param tabs" msgstr "Por favor, corríjalos en las pestañas de parámetros" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"El archivo 3mf ha realizado las siguientes modificaciones en el G-Code de " +"El archivo 3MF ha realizado las siguientes modificaciones en el G-Code de " "los perfiles de filamento o impresora:" +#, fuzzy msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "¡Por favor, confirme que esas modificaciones de G-Code son seguras para " "evitar cualquier daño a la máquina!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "G-Code modificado" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" -"El archivo 3mf tiene los siguientes perfiles personalizados de filamento o " +"El archivo 3MF tiene los siguientes perfiles personalizados de filamento o " "impresora:" +#, fuzzy msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "¡Por favor, confirme que el G-Code dentro de los perfiles son seguros para " @@ -6167,7 +7076,8 @@ msgstr "" msgid "Customized Preset" msgstr "Perfil Personalizado" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "" "¡El nombre de los componentes dentro del archivo de pasos no tiene formato " "UTF8!" @@ -6220,15 +7130,26 @@ msgstr "¿Cargar estos archivos como un objeto único con múltiples piezas?\n" msgid "Object with multiple parts was detected" msgstr "Se ha detectado un objeto con varias piezas" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "El archivo no contiene ninguna información geométrica." +#, fuzzy msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" -"Tu objeto parece demasiado grande, ¿Deseas disminuirlo para que quepa en la " -"cama caliente automáticamente?" +"Su objeto parece demasiado grande, ¿Desea reducir el tamaño automáticamente " +"para que quepa en la cama caliente?" msgid "Object too large" msgstr "Objeto demasiado grande" @@ -6289,6 +7210,34 @@ msgstr "Seleccione un nuevo archivo" msgid "File for the replace wasn't selected" msgstr "El archivo de reemplazo no ha sido seleccionado" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Por favor, seleccione un archivo" @@ -6321,10 +7270,10 @@ msgstr "Laminado Cancelado" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Bandeja de corte %d" +msgstr "Laminando bandeja %d" msgid "Please resolve the slicing errors and publish again." -msgstr "Por favor, resuelve los errores de corte y publica de nuevo." +msgstr "Por favor, resuelva los errores de laminado y publique de nuevo." msgid "" "Network Plug-in is not detected. Network related features are unavailable." @@ -6333,11 +7282,22 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Previsualizar solo el modo:\n" "El archivo cargado contiene solo G-Code, no es posible entrar a la página de " -"Preparación" +"Preparación." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "" @@ -6364,17 +7324,17 @@ msgstr "Guardar proyecto" msgid "Importing Model" msgstr "Importando modelo" -msgid "prepare 3mf file..." -msgstr "Preparar el archivo 3mf..." +msgid "prepare 3MF file..." +msgstr "Preparar el archivo 3MF..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "Descarga fallida; formato de archivo desconocido." -msgid "downloading project ..." +msgid "downloading project..." msgstr "Descargando proyecto..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "Descarga fallida; error de tamaño de archivo." #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6387,13 +7347,23 @@ msgstr "" "La importación a Snapmaker Orca ha fallado. Descargue el archivo e impórtelo " "manualmente." +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "Importar archivo SLA" msgid "The selected file" msgstr "El archivo seleccionado" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "no contiene G-Code válido." msgid "Error occurs while loading G-code file" @@ -6433,11 +7403,11 @@ msgstr "Sólo se puede abrir un archivo de G-Code al mismo tiempo." msgid "G-code loading" msgstr "Carga del G-Code" -msgid "G-code files can not be loaded with models together!" -msgstr "¡Los archivos de G-Code no pueden cargarse con los modelos juntos!" +msgid "G-code files cannot be loaded with models together!" +msgstr "¡Los archivos de G-Code no pueden cargarse junto con modelos!" -msgid "Can not add models when in preview mode!" -msgstr "No se pueden añadir modelos en el modo de vista previa!" +msgid "Cannot add models when in preview mode!" +msgstr "¡No se pueden añadir modelos en el modo de vista previa!" msgid "All objects will be removed, continue?" msgstr "Todos los objetos serán eliminados, ¿desea continuar?" @@ -6474,7 +7444,13 @@ msgid "" "on the printer." msgstr "" "El archivo %s ha sido mandado al almacenamiento de la impresora y puede ser " -"visto en la impresora." +"visualizado en la impresora." + +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " @@ -6490,11 +7466,11 @@ msgstr "Razón: la parte \"%1%\" está vacía." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Motivo: La pieza \"%1%\" no tiene volumen." +msgstr "Motivo: La pieza \"%1%\" no contiene volumen." #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Razón: la parte \"%1%\" se ha intersecado." +msgstr "Razón: la parte \"%1%\" se ha auto-intersecado." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." @@ -6504,20 +7480,6 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"¿Está seguro que quiere almacenar SVGs originales con sus rutas locales " -"dentro del archivo 3MF?\n" -"Si pulsa 'NO', todos los SVGs en el proyecto no serán editables nunca más." - -msgid "Private protection" -msgstr "Protección privada" msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6526,12 +7488,16 @@ msgstr "" msgid "Upload and Print" msgstr "Cargar e imprimir" +msgid "Abnormal print file data. Please slice again" +msgstr "Datos anormales del archivo de impresión. Por favor, lamine de nuevo" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" "Imprimir por objeto: \n" -"Sugiere utilizar el auto-posicionamiento para evitar colisiones al imprimir." +"Se aconseja utilizar el auto-posicionamiento para evitar colisiones al " +"imprimir." msgid "Send G-code" msgstr "Enviar G-Code" @@ -6541,14 +7507,39 @@ msgstr "Enviar a la impresora" msgid "Custom supports and color painting were removed before repairing." msgstr "" -"Los soportes personalizados y la pintura de color se eliminaron antes de la " +"Los soportes personalizados y el pintado de color se eliminaron antes de la " "reparación." msgid "Optimize Rotation" msgstr "Optimizar Rotación" -msgid "Invalid number" -msgstr "Número inválido" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Configuración de Bandeja" @@ -6571,7 +7562,7 @@ msgstr "Nombre del objeto: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" -msgstr "Tamaño: %1% x %2% x %3% en\n" +msgstr "Tamaño: %1% x %2% x %3% pulg\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" @@ -6591,25 +7582,49 @@ msgstr "Volumen: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Triángulos: %1%\n" -msgid "Tips:" -msgstr "Consejos:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" -"La característica \"Arreglar Modelo\" está actualmente solo en Windows. Por " -"favor, repare el modelo en Snapmaker Orca(windows) o el programas CAD." +"La característica \"Arreglar Modelo\" está actualmente disponible sólo en " +"Windows. Por favor, repare el modelo en Snapmaker Orca (windows) o en un " +"programa CAD." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"Bandeja %d: %s no es recomendable ser usada para imprimir el filamento " +"%s(%s). Si desea imprimir de todos modos, por favor, indique una temperatura " +"de bandeja distinta a 0 en la configuración del filamento." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Bandeja% d: %s no está sugerido para ser usado para imprimir filamento " -"%s(%s). Si usted aún quiere imprimir, por favor, seleccione 0 en la " -"temperatura de Bandeja." msgid "Switching the language requires application restart.\n" msgstr "El cambio de idioma requiere el reinicio de la aplicación.\n" @@ -6627,39 +7642,6 @@ msgstr "" msgid "Changing application language" msgstr "Cambiar el idioma de la aplicación" -msgid "Changing the region will log out your account.\n" -msgstr "Si cambias de región, saldrás de tu cuenta.\n" - -msgid "Region selection" -msgstr "Selección de región" - -msgid "Second" -msgstr "Segundo" - -msgid "Browse" -msgstr "Explorar" - -msgid "Choose Download Directory" -msgstr "Elegir Directorio de Descarga" - -msgid "Associate" -msgstr "Asociar" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "porque Snapmaker Orca así que no puede abrir modelos desde" - -msgid "Current Association: " -msgstr "Asociación actual:" - -msgid "Current Instance" -msgstr "Instancia actual" - -msgid "Current Instance Path: " -msgstr "Ruta de Instancia Actual:" - -msgid "General Settings" -msgstr "Configuración General" - msgid "Asia-Pacific" msgstr "Asia-Pacífico" @@ -6675,25 +7657,56 @@ msgstr "América del Norte" msgid "Others" msgstr "Otros" -msgid "Login Region" -msgstr "Región de inicio de sesión" +msgid "Changing the region will log out your account.\n" +msgstr "Si cambias de región, se cerrará la sesión de tu cuenta.\n" -msgid "Stealth Mode" -msgstr "Modo invisible" +msgid "Region selection" +msgstr "Selección de región" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "El periodo de copia de seguridad en segundos." + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Esto detiene la transmisión de datos a los servicios en la nube de Bambu. " -"Los usuarios que no utilicen máquinas BBL o que solo utilicen el modo LAN " -"pueden activar esta función de forma segura." -msgid "Enable network plugin" -msgstr "Activar el plugin de red" +msgid "Browse" +msgstr "Explorar" -msgid "Check for stable updates only" -msgstr "Buscar sólo actualizaciones estables" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Elegir Directorio de Descarga" + +msgid "Associate" +msgstr "Asociar" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "con Snapmaker Orca para que pueda abrir modelos desde" + +msgid "Current Association: " +msgstr "Asociación actual:" + +msgid "Current Instance" +msgstr "Instancia actual" + +msgid "Current Instance Path: " +msgstr "Ruta de Instancia Actual:" + +msgid "General" +msgstr "General" msgid "Metric" msgstr "Métrico" @@ -6704,6 +7717,18 @@ msgstr "Imperial" msgid "Units" msgstr "Unidades" +msgid "Home" +msgstr "Página de Inicio" + +msgid "Default page" +msgstr "Página por defecto" + +msgid "Set the page opened on startup." +msgstr "Establece la página que se abre al inicio." + +msgid "Enable dark mode" +msgstr "Activar modo oscuro" + msgid "Allow only one Snapmaker Orca instance" msgstr "Permitir sólo una instancia de Snapmaker Orca" @@ -6726,14 +7751,110 @@ msgstr "" "mismo Snapmaker Orca ya se está ejecutando, esa instancia se reactivará en su " "lugar." -msgid "Home" -msgstr "Página de Inicio" +msgid "Show splash screen" +msgstr "Mostrar pantalla de inicio" -msgid "Default Page" -msgstr "Página por defecto" +msgid "Show the splash screen during startup." +msgstr "Muestra la página de bienvenida al iniciar." -msgid "Set the page opened on startup." -msgstr "Establece la página que se abre al inicio." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "No avisar cuando cargue archivos 3MF con G-Codes modificados" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Copia de seguridad automática" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Haga copia de seguridad periódicamente para restaurar en caso de fallo " +"ocasional." + +msgid "Preset" +msgstr "Perfil" + +msgid "Remember printer configuration" +msgstr "Recordar la configuración de la impresora" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Si está activada, Orca recordará y cambiará la configuración de archivos/" +"procesos para cada impresora automáticamente." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Gestión multidispositivo" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Con esta opción activada, puede enviar una tarea a varios dispositivos al " +"mismo tiempo y gestionar varios dispositivos." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Todas" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Disposición automática de la placa tras la clonación" msgid "Touchpad" msgstr "Panel táctil" @@ -6747,8 +7868,15 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "Selecciona el estilo de navegación de la cámara:\n" -"Por defecto: LMB+mover para rotación, RMB/MMB+mover para paneo.\n" -"Panel táctil: Alt+mover para rotación, Shift+mover para paneo." +"Por defecto: Botón izquiero del ratón + mover para rotación, botón derecho o " +"central del ratón+mover para desplazar.\n" +"Panel táctil: Alt+mover para rotación, Shift+mover para desplazar." + +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" msgid "Zoom to mouse position" msgstr "Hacer zoom en la posición del ratón" @@ -6768,160 +7896,166 @@ msgstr "" "Si está activada, utiliza la cámara libre. Si no está activada, utiliza la " "cámara restringida." +msgid "Swap pan and rotate mouse buttons" +msgstr "Intercambiar los botones de panorámica y rotación del mouse" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Si está habilitado, intercambia las funciones de panorámica y rotación de " +"los botones izquierdo y derecho del mouse." + msgid "Reverse mouse zoom" msgstr "Invertir el zoom del ratón" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "Si se activa, invierte la dirección del zoom con la rueda del ratón." -msgid "Show splash screen" -msgstr "Mostrar pantalla de inicio" - -msgid "Show the splash screen during startup." -msgstr "Muestra la página de bienvenida al iniciar." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Mostrar la notificación \"Consejo del Día\" después de empezar" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Si está activado, las sugerencias útiles serán mostradas al inicio." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Volumenes de descarga: Auto calcular en cada cambio de color." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Si está activado, auto calcula en cada cambio de color." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." +msgid "Clear my choice on..." msgstr "" -"Volúmenes de descarga: Cálculo automático cada vez que se cambia el " -"filamento." -msgid "If enabled, auto-calculate every time when filament is changed" +msgid "Unsaved projects" msgstr "" -"Si está activada, calcula automáticamente cada vez que se cambia el filamento" - -msgid "Remember printer configuration" -msgstr "Recordar la configuración de la impresora" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" -"Si está activada, Orca recordará y cambiará la configuración de archivos/" -"procesos para cada impresora automáticamente." - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "Gestión multidispositivo (surte efecto tras reiniciar Orca)." - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"Con esta opción activada, puede enviar una tarea a varios dispositivos al " -"mismo tiempo y gestionar varios dispositivos." - -msgid "Network" -msgstr "Red" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Sincronización automática de los perfiles del usuario (Impresora/Filamento/" -"Proceso)" - -msgid "User Sync" -msgstr "Sincronización de usuario" - -msgid "Update built-in Presets automatically." -msgstr "Actualizar perfiles integrados automáticamente." - -msgid "System Sync" -msgstr "Sincronizar sistema" - -msgid "Clear my choice on the unsaved presets." -msgstr "Limpiar mi selección de perfiles no guardados." - -msgid "Associate files to Snapmaker Orca" -msgstr "Asociar archivos a Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Asociar archivos .3mf a Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "" -"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " -"archivos .3mf" - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Asociar archivos .stl a Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "" -"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " -"archivos .stl" - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Asociar archivos .step/.stp a Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "" -"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " -"archivos .step" - -msgid "Associate web links to Snapmaker Orca" -msgstr "Asociar enlaces web a Snapmaker Orca" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "Asociar URLs a Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Máximos proyectos recientes" - -msgid "Maximum count of recent projects" -msgstr "Máxima cantidad de proyectos recientes" msgid "Clear my choice on the unsaved projects." msgstr "Limpiar mi elección de proyectos no guardados." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No avisar cuando cargue archivos 3MF con G-Codes modificados" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "Copia de seguridad automática" +msgid "Clear my choice on the unsaved presets." +msgstr "Limpiar mi selección de perfiles no guardados." + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Haga copia de seguridad periódicamente para restaurar en caso de fallo " -"ocasional." -msgid "every" -msgstr "Todo" +msgid "Login region" +msgstr "Región de inicio de sesión" -msgid "The peroid of backup in seconds." -msgstr "El periodo de copia de seguridad en segundos." +msgid "Stealth mode" +msgstr "Modo invisible" -msgid "Downloads" -msgstr "Descargas" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Esto detiene la transmisión de datos a los servicios en la nube de Bambu. " +"Los usuarios que no utilicen máquinas BBL o que solo utilicen el modo LAN " +"pueden activar esta función de forma segura." -msgid "Dark Mode" -msgstr "Modo Oscuro" +msgid "Network test" +msgstr "Prueba de red" -msgid "Enable Dark mode" -msgstr "Activar Modo Oscuro" +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Buscar sólo actualizaciones estables" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Sincronización automática de los perfiles del usuario (Impresora/Filamento/" +"Proceso)" + +msgid "Update built-in Presets automatically." +msgstr "Actualizar perfiles integrados automáticamente." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Activar el plugin de red" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + +msgid "Associate files to Snapmaker Orca" +msgstr "Asociar archivos a Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Asociar archivos 3MF a Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "" +"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " +"archivos 3MF." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Asociar archivos STL a Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "" +"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " +"archivos STL." + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Asociar archivos STEP a Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "" +"Si se activa, ajusta Snapmaker Orca como aplicación por defecto para abrir " +"archivos STEP." + +msgid "Associate web links to Snapmaker Orca" +msgstr "Asociar enlaces web a Snapmaker Orca" + +msgid "Developer" +msgstr "" msgid "Develop mode" -msgstr "Modo de desarrollo" +msgstr "Modo de desarrollador" msgid "Skip AMS blacklist check" msgstr "Evitar la comprobación de lista negra de AMS" -msgid "Home page and daily tips" -msgstr "Página de inicio y consejos diarios" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Mostrar la página de inicio en el arranque" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Nivel de registro" + +msgid "fatal" +msgstr "fatal" + +msgid "error" +msgstr "error" + +msgid "warning" +msgstr "advertencia" + +msgid "debug" +msgstr "depurar" + +msgid "trace" +msgstr "traza" + +msgid "Debug" +msgstr "Depurar" msgid "Sync settings" msgstr "Ajustes de sincronización" @@ -6954,31 +8088,13 @@ msgid "Mouse wheel reverses when zooming" msgstr "La rueda del ratón se invierte al hacer zoom" msgid "Enable SSL(MQTT)" -msgstr "Enable SSL(MQTT)" +msgstr "" msgid "Enable SSL(FTP)" -msgstr "Enable SSL(FTP)" +msgstr "" msgid "Internal developer mode" -msgstr "Internal developer mode" - -msgid "Log Level" -msgstr "Nivel de registro" - -msgid "fatal" -msgstr "fatal" - -msgid "error" -msgstr "error" - -msgid "warning" -msgstr "advertencia" - -msgid "debug" -msgstr "depurar" - -msgid "trace" -msgstr "traza" +msgstr "" msgid "Host Setting" msgstr "Ajuste de cliente" @@ -7001,10 +8117,10 @@ msgstr "botón de guardar la depuración" msgid "save debug settings" msgstr "guardar los ajustes de depuración" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "¡Los ajustes de depuración se han guardado con éxito!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "¡Cambiado a entorno de nube, Por favor vuelva a autenticarse!" msgid "System presets" @@ -7016,14 +8132,20 @@ msgstr "Perfiles de usuario" msgid "Incompatible presets" msgstr "Perfiles incompatibles" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "Filamentos AMS" -msgid "Click to pick filament color" -msgstr "Haga clic para elegir el color del filamento" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Por favor elija el color del filamento" +msgid "Click to select filament color" +msgstr "Haga clic para elegir el color del filamento" msgid "Add/Remove presets" msgstr "Añadir/Quitar ajustes" @@ -7034,18 +8156,33 @@ msgstr "Editar ajuste" msgid "Project-inside presets" msgstr "Perfiles internos del proyecto" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Añadir/Borrar filamentos" msgid "Add/Remove materials" msgstr "Añadir/Borrar materiales" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Seleccionar/Borrar impresoras (perfiles del sistema)" msgid "Create printer" msgstr "Crear impresora" +msgid "Empty" +msgstr "Vacío" + +msgid "Incompatible" +msgstr "Incompatible" + msgid "The selected preset is null!" msgstr "¡El ajuste seleccionado es nulo!" @@ -7064,6 +8201,12 @@ msgstr "Introduzca el valor de la capa (>= 2)." msgid "Plate name" msgstr "Nombre de Bandeja" +msgid "Same as Global Plate Type" +msgstr "Igual que el Tipo de Bandeja Global" + +msgid "Bed type" +msgstr "Tipo de cama" + msgid "Same as Global Print Sequence" msgstr "Lo mismo que la Secuencia Global de Impresión" @@ -7082,9 +8225,6 @@ msgstr "Vaso en espiral" msgid "First layer filament sequence" msgstr "Secuencia de primera capa de filamento" -msgid "Same as Global Plate Type" -msgstr "Igual que el Tipo de Bandeja Global" - msgid "Same as Global Bed Type" msgstr "Lo mismo que el Tipo de Cama Global" @@ -7102,32 +8242,32 @@ msgstr "Desconectarse" msgid "Slice all plate to obtain time and filament estimation" msgstr "" -"Lamina todas las piezas para obtener una estimación del tiempo y del " +"Laminar todas las piezas para obtener una estimación del tiempo y del " "filamento" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "Empaquetar los datos del proyecto en un archivo 3mf" -msgid "Uploading 3mf" -msgstr "Carga de 3mf" +msgid "Uploading 3MF" +msgstr "Cargando 3mf" msgid "Jump to model publish web page" msgstr "Ir a la página web de publicación de modelos" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Nota: La preparación puede llevar varios minutos. Por favor, sea paciente." msgid "Publish" msgstr "Publicar" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "La publicación fue cancelada" msgid "Slicing Plate 1" msgstr "Bandeja de Laminado 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Empaquetando datos a 3mf" msgid "Jump to webpage" @@ -7146,7 +8286,7 @@ msgstr "Perfil interno del proyecto" msgid "Name is unavailable." msgstr "El nombre no está disponible." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "No se permite sobrescribir un perfil del sistema" #, boost-format @@ -7154,10 +8294,12 @@ msgid "Preset \"%1%\" already exists." msgstr "El perfil \"%1%\" ya existe." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "El perfil \"%1%\" ya existe y es incompatible con la impresora actual." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "Tenga en cuenta que la acción de guardar reemplazará este perfil" msgid "The name cannot be the same as a preset alias name." @@ -7176,7 +8318,7 @@ msgstr "La impresora \"%1%\" está seleccionada con el perfil \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Por favor, elija una acción con \"%1%\" perfil después de guardar." +msgstr "Por favor, elija una acción con el perfil \"%1%\" después de guardar." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " @@ -7193,33 +8335,6 @@ msgstr "Simplemente cambia a \"%1%\"" msgid "Task canceled" msgstr "Tarea cancelada" -msgid "(LAN)" -msgstr "(Red local)" - -msgid "Search" -msgstr "Buscar" - -msgid "My Device" -msgstr "Mi dispositivo" - -msgid "Other Device" -msgstr "Otro dispositivo" - -msgid "Online" -msgstr "En línea" - -msgid "Input access code" -msgstr "Introducir el código de acceso" - -msgid "Can't find my devices?" -msgstr "¿No puedo encontrar mis dispositivos?" - -msgid "Log out successful." -msgstr "Cierre de sesión con éxito." - -msgid "Busy" -msgstr "Ocupado" - msgid "Bambu Cool Plate" msgstr "Bandeja Fría Bambu" @@ -7227,25 +8342,64 @@ msgid "PLA Plate" msgstr "Bandeja PLA" msgid "Bambu Engineering Plate" -msgstr "Bandeja de Ingeniería Bambú" +msgstr "Placa de Ingenieria Bambu" msgid "Bambu Smooth PEI Plate" -msgstr "Bandeja PEI Lisa Bambu" +msgstr "Bandeja Lisa PEI Bambú" msgid "High temperature Plate" msgstr "Bandeja de Alta Temperatura" msgid "Bambu Textured PEI Plate" -msgstr "Bandeja PEI Texturizada Bambu" +msgstr "Bandeja Texturizada PEI Bambú" -msgid "Send print job to" -msgstr "Enviar el trabajo de impresión a" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Calibración de Dinámica de Flujo" -msgid "Click here if you can't connect to the printer" -msgstr "Presione aquí si no puede conectar a la impresora" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "Envío completo" @@ -7253,68 +8407,22 @@ msgstr "Envío completo" msgid "Error code" msgstr "Código de error" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Sin cuenta de acceso, sólo se muestran las impresoras en modo LAN" - -msgid "Connecting to server" -msgstr "Conectando al servidor" - -msgid "Synchronizing device information" -msgstr "Sincronizando la información del dispositivo" - -msgid "Synchronizing device information time out" +msgid "High Flow" msgstr "" -"Finalización del tiempo de sincronización de la información del dispositivo" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"No es posible enviar el trabajo cuando la impresora está actualizando el " -"firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"La impresora está ejecutando instrucciones. Por favor, reinicie la impresión " -"cuando termine" - -msgid "The printer is busy on other print job" -msgstr "La impresora está ocupada con otro trabajo de impresión" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"El %s del filamento excede el número de ranuras AMS. Por favor actualice el " -"firmware para que soporte la asignación de ranuras AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"El %s del filamento excede el número de ranuras AMS. Por favor actualice el " -"firmware para que soporte la asignación de ranuras AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Se han establecido mapeos de filamentos a ranuras AMS. Puede hacer clic en " -"un filamento de arriba para cambiar su asignación de ranura AMS" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Por favor, haga clic en cada filamento superior para especificar la " -"asignación de ranura AMS antes de enviar el trabajo de impresión" #, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" -"El filamento %s no coincide con el filamento la ranura AMS %s. Por favor " +"El filamento %s no coincide con el filamento en la ranura AMS %s. Por favor " "actualice el firmware de la impresora para que soporte la asignación de " "ranuras AMS." @@ -7322,42 +8430,15 @@ msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" -"El %s del filamento excede el número de ranuras AMS. Por favor actualice el " +"El filamento excede el número de ranuras AMS. Por favor actualice el " "firmware de la impresora para que soporte la asignación de ranuras AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"El firmware de la impresora solo soporta el mapeo secuencial de filamento => " -"ranura AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "Es necesario introducir una tarjeta SD antes de imprimir." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"La impresora seleccionada (%s) es incompatible con el perfil de impresora " -"elegido en la cortadora (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Es necesario insertar una tarjeta SD para guardar el timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"No es posible enviar el trabajo de impresión a una impresora la cual " -"necesita una actualización de firmware." - -msgid "Cannot send the print job for empty plate" -msgstr "No es posible enviar el trabajo de impresión a una bandeja vacía" - -msgid "This printer does not support printing all plates" -msgstr "Esta impresora no soporta la impresión en todas las bandejas" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7367,19 +8448,25 @@ msgstr "" "generará videos timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"El timelapse no está soportado porque la secuencia de impresión está " -"configurada \"Por objeto\"." msgid "Errors" msgstr "Errores" -msgid "Please check the following:" -msgstr "Por favor compruebe lo siguiente:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7393,35 +8480,11 @@ msgid "" "start printing." msgstr "" "Hay algunos filamentos desconocidos en los mapeados AMS. Por favor, " -"compruebe si son los filamentos requeridos. Si lo son, presione " -"\"Confirmar\" para empezar a imprimir. Por favor, compruebe si son los " -"filamentos requeridos. Si lo son, presione \"Confirmar\" para empezar a " -"imprimir." +"compruebe si son los filamentos requeridos. Si lo son, presione \"Confirmar" +"\" para empezar a imprimir." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "Boquilla en perfil: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "Boquilla memorizada: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"El diámetro de la boquilla en el archivo laminado no coincide con la " -"boquilla guardada. Si ha cambiado la boquilla últimamente, vaya a " -"Dispositivo > Piezas de la impresora para cambiar la configuración." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"La impresión de material de alta temperatura (%s material) con %s puede " -"causar daños en la boquilla" +msgid "Please check the following:" +msgstr "Por favor compruebe lo siguiente:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7431,31 +8494,214 @@ msgstr "" msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Por favor, presione el botón de confirmar si aún quieres proceder con la " -"impresión." +"Por favor, presione el botón de confirmar si desea proceder con la impresión." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "Conectando a la impresora. No es posible cancelar durante la conexión." - -msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"¡Precaución! La calibración del flujo en la bandeja PEI texturizada puede " -"fallar debido a la superficie dispersa." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Calibración Automática de Flujo usando Micro Lidar" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality." +msgstr "" -msgid "Modifying the device name" -msgstr "Modificar el nombre del dispositivo" +msgid "Preparing print job" +msgstr "Preparando el trabajo de impresión" -msgid "Bind with Pin Code" -msgstr "Vincular con código PIN" +msgid "The name length exceeds the limit." +msgstr "La longitud del nombre supera el límite." -msgid "Send to Printer SD card" -msgstr "Enviar a la tarjeta SD de la impresora" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" + +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Presione aquí si no puede conectar a la impresora" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Sin cuenta de acceso, sólo se muestran las impresoras en modo LAN." + +msgid "Connecting to server..." +msgstr "Conectando al servidor..." + +msgid "Synchronizing device information..." +msgstr "Sincronizando la información del dispositivo..." + +msgid "Synchronizing device information timed out." +msgstr "" +"Error de tiempo de espera de sincronización de la información del " +"dispositivo." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"No es posible enviar el trabajo cuando la impresora está actualizando el " +"firmware" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"La impresora está ejecutando instrucciones. Por favor, reinicie la impresión " +"cuando termine." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"No es posible enviar el trabajo de impresión a una impresora la cual " +"necesita una actualización de firmware." + +msgid "Cannot send a print job for an empty plate." +msgstr "No es posible enviar un trabajo de impresión con una bandeja vacía" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Esta impresora no soporta la impresión de todas las bandejas." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7466,17 +8712,15 @@ msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" "La impresora seleccionada es incompatible con los perfiles seleccionados." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"Es necesario insertar una tarjeta SD antes de enviar a la tarjeta SD de la " -"impresora." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" "Es necesaria que la impresora esté en la misma red local que Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "La impresora no soporta el envío directo a la tarjeta SD." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Laminado correcto." @@ -7506,7 +8750,7 @@ msgid "Failed to parse login report reason" msgstr "Error al analizar el motivo del informe de inicio de sesión" msgid "Receive login report timeout" -msgstr "Tiempo de espera para recibir el informe de inicio de sesión" +msgstr "Tiempo de espera excedido para recibir el informe de inicio de sesión" msgid "Unknown Failure" msgstr "Error Desconocido" @@ -7536,7 +8780,7 @@ msgstr "No se ha podido iniciar sesión. Por favor, compruebe el código PIN." msgid "Log in printer" msgstr "Iniciar sesión en la impresora" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "¿Desea iniciar sesión en esta impresora con la cuenta actual?" msgid "Check the reason" @@ -7549,10 +8793,10 @@ msgid "Terms and Conditions" msgstr "Condiciones generales" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Gracias por adquirir un dispositivo Bambu Lab. Antes de utilizar su " @@ -7582,11 +8826,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "En la comunidad de impresión 3D, aprendemos de los éxitos y fracasos de los " "demás para ajustar nuestros propios parámetros y ajustes de corte. %s sigue " @@ -7640,75 +8884,93 @@ msgstr "" "Presionar para reiniciar todos los ajustes al perfil guardado por defecto." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"Se requiere la torre de purga para un timelapse suave. Puede haber defectos " -"modelos sin torre de purga.¿Está seguro de que quiere deshabilitar la torre " -"principal?" +"Se requiere una torre de purga para un timelapse suave. Puede haber defectos " +"en los modelos si no se usa una torre de purga. ¿Está seguro de que quiere " +"deshabilitar la torre de purgado?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"La torre de purga es necesaria para que el timelapse sea fluido. Puede haber " +"La torre de purga es necesaria para que el timelapse sea suave. Puede haber " "defectos en el modelo sin torre de purga. ¿Desea activar la torre de purga?" msgid "Still print by object?" msgstr "¿Seguir imprimiendo por objeto?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Hemos añadido el ajuste experimental \"Árboles Delgados\" que presenta " -"volúmenes de soporte más pequeños con menos fuerza.\n" -"Recomendamos usarlo con: 0 capas de interfaz, 0 distancia superior, 2 " -"perímetros." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Cuando se use material de soporte para las interfaces de soporte, " +"recomendamos los siguientes ajustes:\n" +"distancia Z 0, separación de interfaz 0, patrón concéntrico y desactivar " +"altura de soporte independiente de altura de capa." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Cambiar estos ajustes automáticamente? \n" +"Cambiar estos ajustes automáticamente?\n" "Sí - Cambiar estos ajustes automáticamente\n" "No - No cambiar estos ajustes" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Para \"Árboles fuertes\" y \"Árboles Híbridos\", recomendamos lo siguiente " -"ajustes: al menos 2 capas de interfaz, al menos 0.1mm de distancia superior " -"en z o usar materiales de soporte en la interfaz." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Cuando se use material de soporte para las interfaces de soporte, " -"recomendamos los siguientes ajustes:\n" -"distancia z0, separación de interfaz 0, patrón concéntrico y desactivar " -"altura de soporte independiente de altura de capa" msgid "" "Enabling this option will modify the model's shape. If your print requires " "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" -"Al activar esta opción modificará la forma del modelo. Si la impresión " -"requiere dimensiones precisas o forma parte de un ensamblado, es importante " +"Al activar esta opción se modificará la forma del modelo. Si la impresión " +"requiere dimensiones precisas o forma parte de un ensamblaje, es importante " "comprobar si este cambio en la geometría afecta a la funcionalidad de la " "impresión." msgid "Are you sure you want to enable this option?" msgstr "¿Está seguro de que desea activar esta opción?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7718,13 +8980,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "La altura de la capa excede el límite en Ajustes de la Impresora -> Extrusor " -"-> Limite de Altura de Capa ,esto puede causar problemas de calidad de " +"-> Limite de Altura de Capa, esto puede causar problemas de calidad de " "impresión." -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "¿Desea ajustar el rango automáticamente?\n" msgid "Adjust" @@ -7735,25 +8997,25 @@ msgstr "Ignorar" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "Característica experimental: Retraer y cortar el filamento a mayor distancia " -"durante los cambios de filamento para minimizar el flujo. Aunque puede " -"reducir notablemente el flujo, también puede elevar el riesgo de atascos de " -"boquillas u otras complicaciones de impresión." +"durante los cambios de filamento para minimizar el descarte. Aunque puede " +"reducir notablemente el descarte, también puede elevar el riesgo de atascos " +"de boquillas u otros problemas en la impresión." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Característica experimental: Retraer y cortar el filamento a mayor distancia " -"durante los cambios de filamento para minimizar el flujo. Aunque puede " -"reducir notablemente el flujo, también puede elevar el riesgo de atascos de " -"boquilla u otras complicaciones de impresión. Por favor, utilícelo con el " +"durante los cambios de filamento para minimizar el descarte. Aunque puede " +"reducir notablemente el descarte, también puede elevar el riesgo de atascos " +"de boquilla u otros problemas en la impresión. Por favor, utilícelo con el " "último firmware de la impresora." msgid "" @@ -7763,12 +9025,87 @@ msgid "" "\"->\"Timelapse Wipe Tower\"." msgstr "" "Cuando se graba un timelapse sin cabezal, se recomienda añadir una \"Torre " -"de Purga de Timelapse\" haciendo clic con el botón derecho del ratón en la " -"posición vacía de la bandeja de impresión y seleccionando \"Añadir " -"Primitivo\"->Torre de Purga de Timelapse\"." +"de Purga de Timelapse\" haciendo clic con el botón derecho del ratón en una " +"posición vacía de la bandeja de impresión y seleccionando \"Añadir Primitivo" +"\"->Torre de Purga de Timelapse\"." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Se creará una copia del preajuste del sistema actual, que se separará del " +"preajuste del sistema." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"El ajuste personalizado actual se separará del ajuste del sistema principal." + +msgid "Modifications to the current profile will be saved." +msgstr "Se guardarán las modificaciones al perfil actual." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Esta acción no es reversible.\n" +"¿Deseas continuar?" + +msgid "Detach preset" +msgstr "Separar ajuste" + +msgid "This is a default preset." +msgstr "Este es un ajuste por defecto." + +msgid "This is a system preset." +msgstr "Este es un ajuste del sistema." + +msgid "Current preset is inherited from the default preset." +msgstr "El ajuste fue heredado del ajuste predeterminado." + +msgid "Current preset is inherited from" +msgstr "El ajuste fue heredado de" + +msgid "It can't be deleted or modified." +msgstr "No puede ser borrado o modificado." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Cualquier modificación debe guardarse como un nuevo preset heredado de este." + +msgid "To do that please specify a new name for the preset." +msgstr "Para hacerlo por favor especifique un nuevo nombre para esos ajustes." + +msgid "Additional information:" +msgstr "Información adicional:" + +msgid "vendor" +msgstr "fabricante" + +msgid "printer model" +msgstr "modelo de impresora" + +msgid "default print profile" +msgstr "perfil de impresión por defecto" + +msgid "default filament profile" +msgstr "perfil de filamento por defecto" + +msgid "default SLA material profile" +msgstr "perfil de material de SLA por defecto" + +msgid "default SLA print profile" +msgstr "perfil de impresión de SLA por defecto" + +msgid "full profile name" +msgstr "nombre completo perfil" + +msgid "symbolic profile name" +msgstr "nombre perfil simbólico" msgid "Line width" -msgstr "Ancho de extrusión" +msgstr "Ancho de linea" msgid "Seam" msgstr "Costura" @@ -7834,15 +9171,27 @@ msgstr "Balsa/capa base de impresión" msgid "Support filament" msgstr "Filamento de soporte" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "Soportes de árbol" -msgid "Skirt" -msgstr "Falda" +msgid "Multimaterial" +msgstr "Multimaterial" msgid "Prime tower" msgstr "Torre de Purga" +msgid "Filament for Features" +msgstr "Filamento para Características" + +msgid "Ooze prevention" +msgstr "Prevención de rezumado" + +msgid "Skirt" +msgstr "Falda" + msgid "Special mode" msgstr "Ajustes especiales" @@ -7869,18 +9218,18 @@ msgid_plural "" "estimation." msgstr[0] "" "La siguiente línea %s contiene palabras clave reservadas.\n" -"Por favor, elimínela, o vencerá la visualización del G-Code y la estimación " +"Por favor, elimínela, o afectará la visualización del G-Code y la estimación " "del tiempo de impresión." msgstr[1] "" "Las siguientes líneas %s contienen palabras clave reservadas.\n" -"Por favor, elimínelas, o vencerá la visualización del G-Code y la estimación " -"del tiempo de impresión." +"Por favor, elimínelas, o afectará la visualización del G-Code y la " +"estimación del tiempo de impresión." msgid "Reserved keywords found" msgstr "Palabras clave utilizadas y encontradas" msgid "Setting Overrides" -msgstr "Anulaciones de configuración" +msgstr "Sobreescribir Ajustes de impresora" msgid "Retraction" msgstr "Retracción" @@ -7894,7 +9243,10 @@ msgstr "Temperatura recomendada de la boquilla" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" "Rango de temperatura de boquilla recomendado para este filamento. 0 " -"significa que no se ajusta" +"significa sin especificar" + +msgid "Flow ratio and Pressure Advance" +msgstr "Ratio de flujo y Avance de Presión Lineal" msgid "Print chamber temperature" msgstr "Temperatura de la cámara" @@ -7902,37 +9254,45 @@ msgstr "Temperatura de la cámara" msgid "Print temperature" msgstr "Temperatura de impresión" -msgid "Nozzle" -msgstr "Boquilla" - msgid "Nozzle temperature when printing" msgstr "Temperatura de la boquilla al imprimir" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Bandeja Fría (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "Bandeja Fría" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Esta es la temperatura de la bandeja cuando la Bandeja Fría está instalada. " "Un valor de 0 significa que el filamento no admite la impresión en la " "Bandeja Fría" -msgid "Textured Cool plate" -msgstr "" +msgid "Textured Cool Plate" +msgstr "Bandeja Fría Texturizada" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" +"Temperatura de la cama cuando la placa fría está instalada. El valor 0 " +"significa que el filamento no se puede imprimir en la placa de refrigeración " +"texturizada" -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "Bandeja de Ingeniería" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Esta es la temperatura de la cama cuando la Bandeja de Ingeniería está " "instalada. Un valor de 0 significa que el filamento no admite la impresión " @@ -7942,9 +9302,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Bandeja PEI suave / Bandeja de Alta Temperatura" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Temperatura de la cama cuando está instalada la bandeja PEI lisa/ Bandeja de " "Alta Temperatura. El valor 0 significa que el filamento no admite la " @@ -7954,8 +9314,8 @@ msgid "Textured PEI Plate" msgstr "Bandeja PEI Texturizada" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Temperatura de la cama cuando la Bandeja PEI Texturizada está instalada. El " "valor 0 significa que el filamento no es compatible para imprimir en la " @@ -7964,9 +9324,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Limitación de la velocidad volumétrica" -msgid "Cooling" -msgstr "Refrigeración" - msgid "Cooling for specific layer" msgstr "Ventilación para la capa específica" @@ -7997,10 +9354,10 @@ msgid "" "than the setting value" msgstr "" "La velocidad del ventilador de la pieza será máxima cuando el tiempo de capa " -"estimado sea inferior al valor ajustado" +"estimado sea inferior al valor especificado" msgid "Auxiliary part cooling fan" -msgstr "Ventilador de parte auxiliar" +msgstr "Ventilador auxiliar de refrigeración de piezas" msgid "Exhaust fan" msgstr "Ventilador de extracción" @@ -8009,34 +9366,43 @@ msgid "During print" msgstr "Durante la impresión" msgid "Complete print" -msgstr "Completar impresión" +msgstr "Después de la impresión" msgid "Filament start G-code" msgstr "G-Code de inicio de filamento" msgid "Filament end G-code" -msgstr "Final del G-Code de filamento" - -msgid "Multimaterial" -msgstr "Multimaterial" +msgstr "G-Code de fin de filamento" msgid "Wipe tower parameters" msgstr "Parámetros de torre de purga" -msgid "Toolchange parameters with single extruder MM printers" -msgstr "Parámetros de cambio de herramienta para impresoras de 1 extrusor MM" - -msgid "Ramming settings" -msgstr "Parámetros de Moldeado de Extremo" - -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Multi Filament" msgstr "" -"Parámetros de cambio de herramienta para impresoras de varios extrusores MM" + +msgid "Tool change parameters with single extruder MM printers" +msgstr "Parámetros de cambio de cabezal para impresoras de 1 extrusor MM" + +msgid "Set" +msgstr "Ajuste" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "" +"Parámetros de cambio de cabezal para impresoras de varios extrusores MM" + +msgid "Dependencies" +msgstr "Dependencias" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Perfiles de proceso compatibles" msgid "Printable space" msgstr "Espacio imprimible" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Valor no válido proporcionado para el parámetro %1%: %2%" @@ -8059,14 +9425,14 @@ msgstr "Malla adaptativa de cama" msgid "Accessory" msgstr "Accesorio" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "G-Code de la máquina" msgid "Machine start G-code" msgstr "G-Code de inicio" msgid "Machine end G-code" -msgstr "G-Code final" +msgstr "G-Code de fin" msgid "Printing by object G-code" msgstr "G-Code de impresión por objeto" @@ -8075,22 +9441,25 @@ msgid "Before layer change G-code" msgstr "G-Code para antes del cambio de capa" msgid "Layer change G-code" -msgstr "Cambiar el G-Code tras el cambio de capa" +msgstr "G-Code tras el cambio de capa" -msgid "Time lapse G-code" -msgstr "Timelapse G-Code" +msgid "Timelapse G-code" +msgstr "G-Code de timelapse" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" msgstr "G-Code para el cambio de filamento" msgid "Change extrusion role G-code" -msgstr "Cambiar el rol de extrusión Código G" +msgstr "G-Code de cambio de rol de extrusión" msgid "Pause G-code" msgstr "G-Code de pausa" msgid "Template Custom G-code" -msgstr "G-Code para el cambio de plantilla" +msgstr "Plantilla para G-Code de usuario" msgid "Motion ability" msgstr "Capacidad de movimiento" @@ -8098,6 +9467,12 @@ msgstr "Capacidad de movimiento" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Limitación de velocidad" @@ -8107,20 +9482,44 @@ msgstr "Limitación de la aceleración" msgid "Jerk limitation" msgstr "Limitación de Jerk" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Configuración de extrusor único multimaterial" +msgid "Number of extruders of the printer." +msgstr "Número de extrusores de la impresora." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Seleccionado Extrusor Único Multi Material, \n" +"y todos los extrusores deben tener el mismo diámetro.\n" +"¿Desea cambiar el diámetro de todos los extrusores al valor del diámetro de " +"la boquilla del primer extrusor?" + +msgid "Nozzle diameter" +msgstr "Diámetro de boquilla" + msgid "Wipe tower" msgstr "Torre de purga" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Parámetros de extrusor único multimaterial" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Esta es una impresora multimaterial de un solo extrusor, los diámetros de " +"todos los extrusores se ajustarán al nuevo valor. ¿Desea continuar?" + msgid "Layer height limits" msgstr "Límites de altura de la capa" -msgid "Lift Z Enforcement" -msgstr "Forzar elevación Z" +msgid "Z-Hop" +msgstr "Salto en Z" msgid "Retraction when switching material" msgstr "Retracción al cambiar de material" @@ -8133,11 +9532,19 @@ msgstr "" "La opción Wipe no está disponible cuando se utiliza el modo Retracción de " "Firmware.\n" "\n" -"Debo desactivarla para activar la retracción de firmware?" +"¿Desea desactivarla y activar el modo Retracción de Firmware?" msgid "Firmware Retraction" msgstr "Retracción de firmware" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Separado" @@ -8149,7 +9556,7 @@ msgstr "" "El perfil de Filamento %d y el perfil de Proceso %d están adjuntos a esta " "impresora. Esos perfiles se borrarían si se elimina la impresora." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "¡Los perfiles heredados de otros perfiles no pueden borrarse!" msgid "The following presets inherit this preset." @@ -8160,31 +9567,24 @@ msgstr[1] "Los siguientes perfiles heredan de este otro." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Preestablecido" +msgstr "Perfil %1%" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "El siguiente perfil también se eliminará." msgstr[1] "Los siguientes perfiles también se eliminarán." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"¿Está seguro de que desea eliminar el perfil seleccionado? \n" -"Si el perfil corresponde a un filamento actualmente en uso en su impresora, " -"restablezca la información del filamento para esa ranura." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "¿Está seguro de %1% el perfil seleccionado?" -msgid "All" -msgstr "Todas" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Ajuste" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8237,8 +9637,7 @@ msgid "Keep the selected options." msgstr "Mantener las opciones seleccionadas." msgid "Transfer the selected options to the newly selected preset." -msgstr "" -"Transfiere las opciones seleccionadas a la nueva preselección seleccionada." +msgstr "Transferir las opciones seleccionadas al nuevo perfil." #, boost-format msgid "" @@ -8253,12 +9652,12 @@ msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"Transfiere las opciones seleccionadas al nuevo perfil seleccionado \n" +"Transferir las opciones seleccionadas al nuevo perfil seleccionado \n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "La preselección \"%1%\" contiene los siguientes cambios no guardados:" +msgstr "El perfil \"%1%\" contiene los siguientes cambios no guardados:" #, boost-format msgid "" @@ -8277,7 +9676,7 @@ msgstr "" "los siguientes cambios no guardados:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "Ha cambiado algunos ajustes del perfil \"%1%\"." msgid "" @@ -8285,7 +9684,7 @@ msgid "" "You can save or discard the preset values you have modified." msgstr "" "\n" -"Puede guardar o descartar los perfiles que haya modificado." +"Puede guardar o descartar los parámetros del perfil que haya modificado." msgid "" "\n" @@ -8293,8 +9692,8 @@ msgid "" "transfer the values you have modified to the new preset." msgstr "" "\n" -"Puede guardar o descartar los valores perfiles que ha modificado, o elegir " -"transferir los valores que ha modificado al nuevo perfil." +"Puede guardar o descartar los parámetros del perfil que haya modificado, o " +"elegir el transferir los valores que ha modificado al nuevo perfil." msgid "You have previously modified your settings." msgstr "Ha modificado previamente su configuración." @@ -8305,14 +9704,11 @@ msgid "" "the modified values to the new project" msgstr "" "\n" -"Puede descartar los valores perfiles que haya modificado, o elegir " +"Puede descartar los parámetros del perfil que haya modificado, o elegir el " "transferir los valores modificados al nuevo proyecto" msgid "Extruders count" -msgstr "Contador de extrusores" - -msgid "General" -msgstr "General" +msgstr "Número de extrusores" msgid "Capabilities" msgstr "Capacidades" @@ -8333,7 +9729,7 @@ msgid "" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" -"Transfiera las opciones seleccionadas del perfil izquierdo al derecho. \n" +"Transferir las opciones seleccionadas del perfil izquierdo al derecho.\n" "Nota: Los nuevos perfiles modificados se seleccionarán en las pestañas de " "configuración después de cerrar este cuadro de diálogo." @@ -8344,8 +9740,8 @@ msgid "" "If enabled, this dialog can be used for transfer selected values from left " "to right preset." msgstr "" -"Si se activa, este cuadro de diálogo se puede utilizar para convertir los " -"valores seleccionados de izquierda a derecha perfiles." +"Si se activa, este cuadro de diálogo se puede utilizar para transferir los " +"valores seleccionados de los perfiles de la izquierda a la los de la derecha." msgid "Add File" msgstr "Añadir archivo" @@ -8364,7 +9760,7 @@ msgid "Basic Info" msgstr "Información Básica" msgid "Pictures" -msgstr "Fotos" +msgstr "Imágenes" msgid "Bill of Materials" msgstr "Lista de materiales" @@ -8378,6 +9774,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Nombre del modelo" +msgid "Description:" +msgstr "Descripción:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Actualizar" @@ -8388,22 +9787,19 @@ msgstr "Hay una nueva versión disponible" msgid "Configuration update" msgstr "Actualización de configuración" -msgid "A new configuration package available, Do you want to install it?" -msgstr "Un nuevo paquete de configuración disponible, ¿quieres instalarlo?" - -msgid "Description:" -msgstr "Descripción:" +msgid "A new configuration package is available. Do you want to install it?" +msgstr "Un nuevo paquete de configuración disponible, ¿desea instalarlo?" msgid "Configuration incompatible" msgstr "Configuración incompatible" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "el paquete de configuración es incompatible con la aplicación actual." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "El paquete de configuración es incompatible con la aplicación actual.\n" "%s Actualiza el paquete de configuración, de lo contrario no podrá iniciar" @@ -8412,9 +9808,6 @@ msgstr "" msgid "Exit %s" msgstr "Salir %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "el paquete de configuración es incompatible con la APP actual." - msgid "Configuration updates" msgstr "Actualizaciones de la configuración" @@ -8424,61 +9817,220 @@ msgstr "No hay actualizaciones disponibles." msgid "The configuration is up to date." msgstr "La configuración está actualizada." -msgid "Obj file Import color" -msgstr "Archivo Obj Importar color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Importar color de archivo OBJ" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" msgstr "Especifique el número de colores:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "El recuento de colores debe estar en el rango [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "Recomendado " -msgid "Current filament colors:" -msgstr "Colores de filamento actuales:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Configurar rápido:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Combinación de colores" +msgstr "Coincidencia de colores" msgid "Approximate color matching." -msgstr "Coincidencia de color aproximada." +msgstr "Coincidencia aproximada de colores." msgid "Append" msgstr "Añadir" -msgid "Add consumable extruder after existing extruders." -msgstr "Añadir extrusora consumible después de las extrusoras existentes." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "Restablecer extrusoras mapeadas." -msgid "Cluster colors" -msgstr "Colores de grupos" - -msgid "Map Filament" -msgstr "Mapear Filamento" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Nota: Una vez seleccionado el color, puede elegir OK\n" -"para continuar o ajustarlo manualmente." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Usar AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"La impresora seleccionada (%s) es incompatible con el perfil de impresora " +"elegido en Orca (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"El timelapse no está soportado porque la secuencia de impresión está " +"configurada \"Por objeto\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Advertencia: El recuento de extrusores recién añadidos y \n" -"actuales es superior a 16.Advertencia: El recuento de extrusores recién " -"añadidos y \n" -"actuales es superior a 16." msgid "Ramming customization" msgstr "Personalización de Moldeado de Extremo" @@ -8495,71 +10047,58 @@ msgid "" "jams, extruder wheel grinding into filament etc." msgstr "" "El moldeado de extremo se refiere a una extrusión rápida justo antes del " -"cambio de herramienta en la impresora MM de extrusor único. Su propósito es " -"dar una forma adecuada al final del filamento descargado para no impedir la " +"cambio de cabezal en impresorad MM de extrusor único. Su propósito es dar " +"una forma adecuada al final del filamento descargado para no impedir la " "inserción del nuevo filamento, y que pueda ser reinsertada por si misma " "posteriormente." -msgid "Total ramming time" -msgstr "Tiempo total de Moldeado de Extremo" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Para un flujo constante, mantén pulsado %1% mientras arrastras." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Volumen de moldeado de extremo total" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Ancho de línea de Moldeado de Extremo" +msgid "Ramming line" +msgstr "" -msgid "Ramming line spacing" -msgstr "Separación de línea de moldeado de extremo" +msgid "" +"Orca would re-calculate your flushing volumes everytime the filaments color " +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" +msgstr "" -msgid "Auto-Calc" -msgstr "Auto-Calc" +msgid "Flushing volume (mm³) for each filament pair." +msgstr "Volumen de purgado (mm³) para cada par de filamentos." + +#, c-format, boost-format +msgid "Suggestion: Flushing Volume in range [%d, %d]" +msgstr "Sugerencia: Volumen de purgado en rango [%d, %d]" + +#, c-format, boost-format +msgid "The multiplier should be in range [%.2f, %.2f]." +msgstr "El multiplo debería estar en el rango [%.2f, %.2f]." msgid "Re-calculate" msgstr "Recalcular" -msgid "Flushing volumes for filament change" -msgstr "Volúmenes de limpieza para el cambio de filamentos" - -msgid "" -"Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +msgid "Left extruder" msgstr "" -"Orca volverá a calcular sus volúmenes de descarga cada vez que se cambie el " -"color de los filamentos. Puedes desactivar el cálculo automático en Orca " -"Slicer > Preferencias." -msgid "Flushing volume (mm³) for each filament pair." -msgstr "Volumen de limpieza (mm³) para cada par de filamentos." - -#, c-format, boost-format -msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "Sugerencias: Volumen de Flujo en rango [%d, %d]" - -#, c-format, boost-format -msgid "The multiplier should be in range [%.2f, %.2f]." -msgstr "El multiplicador debería estar en el rango [%.2f, %.2f]." +msgid "Right extruder" +msgstr "" msgid "Multiplier" -msgstr "Multiplicador" +msgstr "Multiplo" -msgid "unloaded" -msgstr "Descargado" +msgid "Flushing volumes for filament change" +msgstr "Volúmenes de purgado para el cambio de filamentos" -msgid "loaded" -msgstr "Cargado" - -msgid "Filament #" -msgstr "Filamento #" - -msgid "From" -msgstr "Desde" - -msgid "To" -msgstr "A" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8577,7 +10116,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Falta el componente BambuSource registrado para la reproducción multimedia. " "Vuelva a instalar BambuStudio o solicite ayuda posventa." @@ -8591,15 +10130,15 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "A tu sistema le faltan los codecs H.264 para GStreamer, necesarios para " -"reproducir vídeo. (Prueba a instalar los paquetes gstreamer1.0-plugins-bad " -"o gstreamer1.0-libav y, a continuación, reinicia Snapmaker Orca...)." +"reproducir vídeo. (Prueba a instalar los paquetes gstreamer1.0-plugins-bad o " +"gstreamer1.0-libav y, a continuación, reinicia Snapmaker Orca...)." msgid "Bambu Network plug-in not detected." -msgstr "Plugin Red Bambú no detectado." +msgstr "Plugin Red Bambu no detectado." msgid "Click here to download it." msgstr "Presione aquí para descargarlo." @@ -8623,12 +10162,6 @@ msgstr "Lista de objetos" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importar datos de geometría de los archivos STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Pegar desde el portapapeles" @@ -8644,69 +10177,43 @@ msgstr "Muestra lista de atajos de teclado" msgid "Global shortcuts" msgstr "Atajos globales" +msgid "Pan View" +msgstr "Desplazar vista" + msgid "Rotate View" msgstr "Rotar Vista" -msgid "Pan View" -msgstr "Vista Panorámica" - -msgid "Mouse wheel" -msgstr "Rueda de ratón" - msgid "Zoom View" -msgstr "Vista de Zoom" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "Hacer Zoom" msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"Orienta automáticamente los objetos seleccionados o todos los objetos.Si hay " -"objetos seleccionados, sólo orienta los seleccionados.En caso contrario, " -"orientará todos los objetos del disco actual." +"Orienta automáticamente los objetos seleccionados o todos los objetos. Si " +"hay objetos seleccionados, sólo orienta los seleccionados. En caso " +"contrario, orientará todos los objetos del proyecto actual." -msgid "Shift+Tab" -msgstr "Shift+Tab" +#, fuzzy +msgid "Auto orients all objects on the active plate." +msgstr "Orienta automáticamente todos los objetos de la placa actual." msgid "Collapse/Expand the sidebar" msgstr "Ocultar/Expandir barra lateral" -msgid "⌘+Any arrow" -msgstr "⌘+Cualquier tecla" +msgid "Any arrow" +msgstr "⌘+Cualquier flecha" msgid "Movement in camera space" msgstr "Movimiento en el espacio de la cámara" -msgid "⌥+Left mouse button" -msgstr "Botón de ratón ⌥+Left" - msgid "Select a part" msgstr "Seleccionar una pieza" -msgid "⌘+Left mouse button" -msgstr "⌘+botón izquierdo de ratón" - msgid "Select multiple objects" msgstr "Seleccionar varios objetos" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Cualquier flecha" - -msgid "Alt+Left mouse button" -msgstr "Alt+Botón izquierdo de ratón" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Botón izquierdo de ratón" - -msgid "Shift+Left mouse button" -msgstr "Shift+Left+Botón izquierdo de ratón" - msgid "Select objects by rectangle" msgstr "Seleccionar objetos por rectángulo" @@ -8734,9 +10241,6 @@ msgstr "Flecha hacia derecha" msgid "Move selection 10 mm in positive X direction" msgstr "Mover la selección 10 mm en dirección X positiva" -msgid "Shift+Any arrow" -msgstr "Mayúsculas+Cualquier flecha" - msgid "Movement step set to 1 mm" msgstr "Paso de movimiento configurado a 1 mm" @@ -8747,7 +10251,7 @@ msgid "Camera view - Default" msgstr "Vista de la cámara - Por defecto" msgid "Camera view - Top" -msgstr "Vista de la cámara Superior" +msgstr "Vista de la cámara - Parte Superior" msgid "Camera view - Bottom" msgstr "Vista de la cámara - Parte inferior" @@ -8768,28 +10272,43 @@ msgid "Select all objects" msgstr "Seleccionar todos los objetos" msgid "Gizmo move" -msgstr "Movimiento Gizmo" - -msgid "Gizmo scale" -msgstr "Escala Gizmo" +msgstr "Herramienta de movimiento" msgid "Gizmo rotate" -msgstr "Rotación Gizmo" +msgstr "Herramienta de rotación" + +msgid "Gizmo scale" +msgstr "Herramienta de escala" + +msgid "Gizmo place face on bed" +msgstr "Herramienta de situar cara en cama" msgid "Gizmo cut" -msgstr "Corte Gizmo" +msgstr "Herramienta de corte" -msgid "Gizmo Place face on bed" -msgstr "Situar cara en cama en modo Gizmo" +msgid "Gizmo mesh boolean" +msgstr "Gizmo buleana de malla" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "Puntos de soporte SLA Gizmo" +msgstr "Herramienta de puntos de soporte SLA" msgid "Gizmo FDM paint-on seam" -msgstr "Costura de pintura Gizmo FDM" +msgstr "Herramienta de pintado de costuras FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Texto en relieve / grabado" +msgid "Gizmo text emboss/engrave" +msgstr "Herramienta de texto en relieve/grabado" + +msgid "Gizmo measure" +msgstr "Gizmo medir" + +msgid "Gizmo assemble" +msgstr "Gizmo ensamblar" + +msgid "Gizmo brim ears" +msgstr "Gizmo orejas de borde" msgid "Zoom in" msgstr "Acercar" @@ -8798,7 +10317,7 @@ msgid "Zoom out" msgstr "Alejar" msgid "Switch between Prepare/Preview" -msgstr "Cambiar entre Preparar/Previsualizar" +msgstr "Cambiar entre Preparar/Previsualizar" msgid "Plater" msgstr "Bandeja" @@ -8806,32 +10325,20 @@ msgstr "Bandeja" msgid "Move: press to snap by 1mm" msgstr "Mover: pulsar para ajustar 1mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Rueda del ratón" - msgid "Support/Color Painting: adjust pen radius" -msgstr "Soporte/Pintado en color: ajuste del radio de la pluma" - -msgid "⌥+Mouse wheel" -msgstr "⌥+Rueda del ratón" +msgstr "Soporte/Pintado en color: ajuste del radio del pincel" msgid "Support/Color Painting: adjust section position" msgstr "Soporte/Pintado de color: ajuste de la posición de la sección" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Rueda del ratón" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Rueda del ratón" - msgid "Gizmo" -msgstr "Artilugio" +msgstr "Herramienta" msgid "Set extruder number for the objects and parts" msgstr "Ajustar el número de extrusor para los objetos y las piezas" -msgid "Delete objects, parts, modifiers " -msgstr "Eliminar objetos, piezas, modificadores " +msgid "Delete objects, parts, modifiers" +msgstr "Eliminar objetos, piezas, modificadores" msgid "Select the object/part and press space to change the name" msgstr "" @@ -8865,15 +10372,12 @@ msgstr "" msgid "On/Off one layer mode of the vertical slider" msgstr "Activar/Desactivar el modo de una capa del control deslizante vertical" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Activar/Desactivar ventana de G-Code" msgid "Move slider 5x faster" msgstr "Mover el deslizador 5 veces más rápido" -msgid "Shift+Mouse wheel" -msgstr "Shit+Rueda de ratón" - msgid "Horizontal slider - Move to start position" msgstr "Deslizador horizontal - Desplazarse a la posición inicial" @@ -8881,10 +10385,10 @@ msgid "Horizontal slider - Move to last position" msgstr "Deslizador horizontal - Desplazarse a la última posición" msgid "Release Note" -msgstr "Notas de lanzamiento" +msgstr "Notas de versión" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "información de actualización de la versión %s:" msgid "Network plug-in update" @@ -8897,8 +10401,8 @@ msgstr "" "a iniciarse." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "Un nuevo plug-in de red(%s) está disponible. ¿Desea instalarlo?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Un nuevo plug-in de red (%s) está disponible. ¿Desea instalarlo?" msgid "New version of Snapmaker Orca" msgstr "Nueva versión de Snapmaker Orca" @@ -8906,63 +10410,29 @@ msgstr "Nueva versión de Snapmaker Orca" msgid "Skip this Version" msgstr "Saltar esta Versión" -msgid "Done" -msgstr "Hecho" - -msgid "resume" -msgstr "Continuar" - -msgid "Resume Printing" -msgstr "Continuar Imprimiendo" - -msgid "Resume Printing(defects acceptable)" -msgstr "Continuar Imprimiendo (defectos aceptables)" - -msgid "Resume Printing(problem solved)" -msgstr "Continuar Imprimiendo (problema solucionado)" - -msgid "Stop Printing" -msgstr "Dejar de imprimir" - -msgid "Check Assistant" -msgstr "Asistente de Pruebas" - -msgid "Filament Extruded, Continue" -msgstr "Filamento extruido, Continuar" - -msgid "Not Extruded Yet, Retry" -msgstr "Aún no extruido, reintentar" - -msgid "Finished, Continue" -msgstr "Terminado, Continuar" - -msgid "Load Filament" -msgstr "Cargar" - -msgid "Filament Loaded, Resume" -msgstr "Filamento cargado, reanudar" - -msgid "View Liveview" -msgstr "Ver Vista en Directo" - msgid "Confirm and Update Nozzle" msgstr "Confirmar y Actualizar la Boquilla" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Conexión de red fallida (Mandando archivo de impresión)" +msgid "Connect the printer using IP and access code" +msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Paso 1, por favor confirmar que Snapmaker Orca y tu impresora se encuentran en " -"la misma red local." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Paso 2, si la IP y el Código de Acceso de abajo son diferentes de los " -"valores actuales en su impresora, por favor, corríjalos." msgid "IP" msgstr "IP" @@ -8970,19 +10440,41 @@ msgstr "IP" msgid "Access Code" msgstr "Código de Acceso" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "¿Dónde encontrar la IP de su impresora y el Código de Acceso?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" msgstr "" -"Paso 3: Haga ping a la dirección IP para comprobar la perdida de paquetes y " -"la latencia." -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" -msgstr "¡Ip y Código de Acceso Verificadas! ¡Debería cerrar esta ventana" +msgstr "¡Ip y Código de Acceso Verificadas! Puede cerrar esta ventana" + +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" msgid "Connection failed, please double check IP and Access Code" msgstr "" @@ -8995,31 +10487,51 @@ msgstr "" "¡Conexión fallida!, si su dirección IP y el Código de Acceso son correctos.\n" "por favor, pase al paso 3 para corregir problemas de red" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Modelo:" -msgid "Serial:" -msgstr "Número de serie:" - -msgid "Version:" -msgstr "Versión:" - msgid "Update firmware" msgstr "Actualizar firmware" msgid "Beta version" msgstr "Versión beta" -msgid "Latest version" -msgstr "Última versión" - msgid "Updating" msgstr "Actualizando" -msgid "Updating failed" -msgstr "Fallo Actualizando" +msgid "Update failed" +msgstr "Actualización fallida" -msgid "Updating successful" +msgid "Update successful" msgstr "Actualización exitosa" msgid "" @@ -9050,8 +10562,8 @@ msgstr "" msgid "Extension Board" msgstr "Placa de Ampliación" -msgid "Saving objects into the 3mf failed." -msgstr "El guardado de objetos en el 3mf no ha funcionado." +msgid "Saving objects into the 3MF failed." +msgstr "El guardado de objetos en el 3MF no ha funcionado." msgid "Only Windows 10 is supported." msgstr "Sólo es compatible con Windows 10." @@ -9074,23 +10586,23 @@ msgstr "La reparación no ha funcionado." msgid "Loading repaired objects" msgstr "Carga de objetos reparados" -msgid "Exporting 3mf file failed" -msgstr "La exportación del archivo 3mf ha fallado" +msgid "Exporting 3MF file failed" +msgstr "La exportación del archivo 3MF ha fallado" -msgid "Import 3mf file failed" -msgstr "La importación del archivo 3mf ha fallado" +msgid "Import 3MF file failed" +msgstr "La importación del archivo 3MF ha fallado" -msgid "Repaired 3mf file does not contain any object" -msgstr "El archivo 3mf reparado no contiene ningún objeto" +msgid "Repaired 3MF file does not contain any object" +msgstr "El archivo 3MF reparado no contiene ningún objeto" -msgid "Repaired 3mf file contains more than one object" -msgstr "El archivo 3mf reparado contiene más de un objeto" +msgid "Repaired 3MF file contains more than one object" +msgstr "El archivo 3MF reparado contiene más de un objeto" -msgid "Repaired 3mf file does not contain any volume" -msgstr "El archivo 3mf reparado no contiene ningún volumen" +msgid "Repaired 3MF file does not contain any volume" +msgstr "El archivo 3MF reparado no contiene ningún volumen" -msgid "Repaired 3mf file contains more than one volume" -msgstr "El archivo 3mf reparado contiene más de un volumen" +msgid "Repaired 3MF file contains more than one volume" +msgstr "El archivo 3MF reparado contiene más de un volumen" msgid "Repair finished" msgstr "Reparación terminada" @@ -9135,17 +10647,24 @@ msgid "" "Maybe parts of the object at these height are too thin, or the object has " "faulty mesh" msgstr "" -"Tal vez las piezas del objeto a esa altura son demasiado finas, o el objeto " +"Tal vez detalles del objeto a esa altura son demasiado finos, o el objeto " "tiene una malla defectuosa" msgid "No object can be printed. Maybe too small" msgstr "No se puede imprimir ningún objeto. Tal vez sea demasiado pequeño" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Las piezas se encuentran muy cerca de las regiones de purgado. Asegúrese de " +"que no hay colisión." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"La generación ha fallado del G-Code por un G-Code personalizado no válido.\n" +"La generación del G-Code ha fallado por un G-Code personalizado no válido.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." @@ -9157,6 +10676,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "Generando G-Code: capa %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Perímetro interno" @@ -9188,23 +10716,23 @@ msgid "Support interface" msgstr "Interfaz de soporte" msgid "Support transition" -msgstr "Apoyo a la transición" +msgstr "Transición de soporte" msgid "Multiple" msgstr "Múltiple" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" -"Ha fallado el cálculo del ancho de extrusión de %1%. No se puede obtener el " +"Ha fallado el cálculo del ancho de línea de %1%. No se puede obtener el " "valor de \"%2%\". " msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " "and extrusion width" msgstr "" -"Separación no válido suministrado a Flow::with_spacing(), comprueba la " -"altura de su capa y el ancho de extrusión." +"Espaciado no válido suministrado a Flow::with_spacing(), comprueba la altura " +"de su capa y el ancho de extrusión." msgid "undefined error" msgstr "error no definido" @@ -9314,15 +10842,16 @@ msgstr "%1% está demasiado cerca de otros, y pueden producirse colisiones." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% es demasiado alto, y se producirán colisiones." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" está muy cerca de otros, puede conllevar colisiones cuando se imprime." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " está muy cerca del área de exclusión, puede conllevar colisiones cuando se " "imprime." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Torre de Purga" @@ -9334,13 +10863,34 @@ msgstr "" " está demasiado cerca del área de exclusión, y se producirán colisiones.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"No se pueden imprimir juntos varios filamentos que tengan una gran " -"diferencia de temperatura. De lo contrario, el extrusor y la boquilla pueden " -"bloquearse o dañarse durante la impresión" msgid "No extrusions under current settings." msgstr "No hay extrusiones con los ajustes actuales." @@ -9352,6 +10902,15 @@ msgstr "" "Modo de timelapse suave no está soportado cuando la secuencia \"por objeto\" " "está activada." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9366,6 +10925,15 @@ msgstr "" "El modo de jarrón en espiral no funciona cuando un objeto contiene más de un " "material." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Aunque el objeto %1% se ajusta al volumen de construcción, supera la altura " +"máxima del volumen de construcción debido a la compensación de la " +"contracción del material." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "El objeto %1% supera la altura máxima del volumen de construcción." @@ -9375,8 +10943,8 @@ msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." msgstr "" -"Mientras que el objeto %1% se ajusta al volumen de construcción, su última " -"capa excede la altura máxima del volumen de construcción." +"Aunque el objeto %1% se ajusta al volumen de construcción, su última capa " +"excede la altura máxima del volumen de construcción." msgid "" "You might want to reduce the size of your model or change current print " @@ -9387,33 +10955,37 @@ msgstr "" msgid "Variable layer height is not supported with Organic supports." msgstr "" -"La altura de capa variable no es compatible con los soportes orgánicos." +"La altura de capa adaptativa no es compatible con los soportes orgánicos." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Diámetros de boquillas diferentes y diámetros de filamento diferentes no " -"están permitidos cuando la torre de purga está activada." +"Diámetros de boquillas y diámetros de filamento diferentes pueden no " +"funcionar correctamente cuando la torre de purga está activada. Esta función " +"es experimental, así que proceda con cautela." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"Actualmente, la torre de limpieza sólo es compatible con el direccionamiento " +"Actualmente, la torre de purga sólo es compatible con el direccionamiento " "relativo del extrusor (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Actualmente no se puede evitar el rezume con la torre principal activada." +"La prevención de rezumado sólo es compatible con la torre de limpieza cuando " +"'single_extruder_multi_material' está desactivado." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"Actualmente, la torre de purga sólo es compatible con las versiones Marlin, " -"RepRap/Sprinter, RepRapFirmware y Repetier G-Code." +"Actualmente, la torre de purga sólo es compatible para los firmwares Marlin, " +"RepRap/Sprinter, RepRapFirmware y Repetier." msgid "The prime tower is not supported in \"By object\" print." msgstr "La torre de purga no es compatible con la impresión \"Por objeto\"." @@ -9425,62 +10997,79 @@ msgstr "" "La torre de purga no es compatible cuando la altura de capa adaptativa está " "activada. Requiere que todos los objetos tengan la misma altura de capa." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "La torre de purga requiere que el \"hueco de apoyo\" sea múltiplo de la " "altura de la capa" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "La torre de purga requiere que todos los objetos tengan la misma altura de " "capa" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "La torre de purga requiere que todos los objetos se impriman sobre el mismo " -"número de capas de balsa( base de impresión)" +"número de capas de balsa (base de impresión)" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"La torre de purga requiere que todos los objetos se corten con las mismas " -"alturas de capa." +"La torre de purga requiere que todos los objetos se laminen con la misma " +"altura de capa." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "La torre de purga sólo se admite si todos los objetos tienen la misma altura " -"de capa variable" +"de capa adaptativa" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" msgid "Too small line width" -msgstr "Ancho de extrusión demasiado pequeño" +msgstr "Ancho de línea demasiado pequeño" msgid "Too large line width" -msgstr "Ancho de extrusión demasiado grande" +msgstr "Ancho de línea demasiado grande" + +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"La torre de purga requiere que el soporte tenga la misma altura de capa con " +"La torre de purga requiere que el soporte tenga la misma altura de capa que " "el objeto." msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." msgstr "" -"El diámetro de la punta del árbol de soporte orgánico no debe ser menor que " -"el ancho de extrusión del material de soporte." +"El diámetro de la punta del árbol de soporte orgánico no puede ser menor que " +"el ancho de línea del material de soporte." msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" "El diámetro de la rama de soporte orgánico no debe ser menor que 2x el ancho " -"de extrusión del material de soporte." +"de línea del material de soporte." msgid "" "Organic support branch diameter must not be smaller than support tree tip " @@ -9492,10 +11081,10 @@ msgstr "" msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -"Se utilizan las herramientas de aplicación de soporte pero el soporte no " -"está habilitado. Por favor, active el soporte." +"Se utilizan las herramientas de forzado de soporte pero los soportes no " +"están habilitados. Por favor, active la generación de soportes." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "La altura de la capa no puede superar el diámetro de la boquilla" msgid "" @@ -9505,21 +11094,21 @@ msgid "" msgstr "" "El direccionamiento de extrusión relativa requiere reiniciar la posición del " "extrusor en cada capa para evitar perdidas de precisión de punto flotante. " -"Añade \"G92 E0\" al código de capa." +"Añade \"G92 E0\" al G-code de antes de cambio de capa." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -"Se ha encontrado \"G92 E0\" en before_layer_gcode, el cual es incompatible " -"con el direccionamiento de extrusión absoluta." +"Se ha encontrado \"G92 E0\" en before_layer_change_gcode, lo cual es " +"incompatible con el direccionamiento de extrusión absoluta." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" -"Se ha encontrado \"G92 E0\" en layer_gcode, el cual es incompatible con el " -"direccionamiento de extrusión absoluta." +"Se ha encontrado \"G92 E0\" en after_layer_change_gcode, lo cual es " +"incompatible con el direccionamiento de extrusión absoluta." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" @@ -9540,11 +11129,20 @@ msgid "" "get higher speeds." msgstr "" "El ajuste de jerk supera el jerk máximo de la impresora (machine_max_jerk_x/" -"machine_max_jerk_y). Orca limitará automáticamente la velocidad de tirón " -"para garantizar que no supere las capacidades de la impresora. Puede ajustar " -"el ajuste de jerk máximo en la configuración de la impresora para obtener " +"machine_max_jerk_y). Orca limitará automáticamente la velocidad de jerk para " +"garantizar que no supere las capacidades de la impresora. Puede ajustar el " +"ajuste de jerk máximo en la configuración de la impresora para usar " "velocidades más altas." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9557,7 +11155,7 @@ msgstr "" "(machine_max_acceleration_extruding). Orca limitará automáticamente la " "velocidad de aceleración para garantizar que no supere las capacidades de la " "impresora. Puede ajustar el valor machine_max_acceleration_extruding en la " -"configuración de la impresora para obtener velocidades superiores." +"configuración de la impresora para usar velocidades superiores." msgid "" "The travel acceleration setting exceeds the printer's maximum travel " @@ -9572,7 +11170,19 @@ msgstr "" "Orca limitará automáticamente la velocidad de aceleración de desplazamiento " "para garantizar que no supere las capacidades de la impresora.\n" "Puede ajustar el valor de machine_max_acceleration_travel en la " -"configuración de la impresora para obtener velocidades más altas." +"configuración de la impresora para usar velocidades más altas." + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"La contracción del filamento no se utilizará porque la contracción del " +"filamento para los filamentos utilizados difiere significativamente." msgid "Generating skirt & brim" msgstr "Generando falda y borde de adherencia" @@ -9586,9 +11196,15 @@ msgstr "Generando G-Code" msgid "Failed processing of the filename_format template." msgstr "Procesamiento fallido de la plantilla filename_format." +msgid "Printer technology" +msgstr "Tecnología de la impresora" + msgid "Printable area" msgstr "Área imprimible" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Área excluida de la cama" @@ -9609,17 +11225,17 @@ msgid "Bed custom model" msgstr "Modelo personalizado de cama" msgid "Elephant foot compensation" -msgstr "Compensación del pata de elefante" +msgstr "Compensación de Pata de elefante" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"Contraer la primera capa en la bandeja de impresión para compensar el efecto " -"de la pata de elefante" +"Contracción de la primera capa en la bandeja de impresión para compensar el " +"efecto de Pata de elefante" msgid "Elephant foot compensation layers" -msgstr "Capas de compensación de la pata de elefante" +msgstr "Capas de compensación de Pata de elefante" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9627,31 +11243,39 @@ msgid "" "the next layers will be linearly shrunk less, up to the layer indicated by " "this value." msgstr "" -"El número de capas en las que estará activa la compensación de pata de " -"elefante. La primera capa se encogerá por el valor de compensación de pata " -"de elefante, luego las siguientes capas se encogerán linealmente menos, " -"hasta la capa indicada por este valor." +"El número de capas en las que estará activa la compensación de Pata de " +"elefante. La primera capa se encogerá por el valor de compensación de Pata " +"de elefante, en las siguientes capas se disminuirá linealmente el efecto de " +"encogimiento, hasta la capa indicada por este parámetro." msgid "layers" msgstr "capas" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" -"Altura de corte para cada capa. Una altura de capa más pequeña significa más " -"precisión y más tiempo de impresión" +"Altura de laminado para cada capa. Una altura de capa más pequeña significa " +"más precisión y más tiempo de impresión" msgid "Printable height" msgstr "Altura imprimible" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "Altura máxima imprimible limitada por el mecanismo de la impresora" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "Orientación preferida" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" "Orientar automáticamente los stls en el eje Z en la importación inicial" @@ -9661,7 +11285,7 @@ msgstr "Nombres de perfiles de la impresora" msgid "Use 3rd-party print host" msgstr "Utilizar host de impresión de terceros" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "Permitir el control de la impresora de BambuLab a través de hosts de " "impresión de terceros" @@ -9678,7 +11302,7 @@ msgid "" msgstr "" "Snapmaker Orca puede subir archivos G-Code a una impresora. Este campo debería " "contener el nombre de host, la dirección IP o la URL de la instancia de la " -"impresora. Se puede acceder a la impresora detrás de un proX-Y con la " +"impresora. Se puede acceder a la impresora detrás de un proxy con la " "autenticación básica activada por un nombre de usuario y contraseña en la " "URL en el siguiente formato: https://nombredeusuario:" "contraseña@tudirecciondeoctopi/" @@ -9687,7 +11311,7 @@ msgid "Device UI" msgstr "IU de dispositivo" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Especifica la URL de tu IU de dispositivo si no es el mismo que el host de " "impresión" @@ -9703,7 +11327,7 @@ msgstr "" "debería contener una clave API o una contraseña requerida para la " "autenticación." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Nombre de la impresora" msgid "HTTPS CA File" @@ -9736,7 +11360,7 @@ msgstr "" "o puntos de distribución sin conexión. Se debería activar esta opción de " "certificados autofirmados si la conexión falla." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Nombres de perfiles relacionados por la impresora física" msgid "Authorization Type" @@ -9748,22 +11372,23 @@ msgstr "Clave API" msgid "HTTP digest" msgstr "Resumen HTTP" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Evitar cruzar perímetro" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Desvíese y evite atravesar el perímetro, ya que puede provocar una mancha en " "la superficie" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Evitar cruzar perímetro - Longitud de desvío máximo" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Distancia de desvío máximo para evitar cruzar el perímetro. No lo evite si " "la distancia de desvío es más alta que este valor. La distancia de desvío " @@ -9777,97 +11402,114 @@ msgid "Other layers" msgstr "Otras capas" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Esta es la temperatura de la cama para las capas excepto la inicial. Un " "valor de 0 significa que el filamento no admite la impresión en la Bandeja " -"Fría" - -msgid "°C" -msgstr "°C" +"Fría." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" +"Temperatura de la cama para las capas excepto la inicial. El valor 0 " +"significa que el filamento no es compatible para imprimir en la placa fría " +"texturizada." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Esta es la temperatura de la cama para las capas excepto la inicial. Un " "valor de 0 significa que el filamento no admite la impresión en la Bandeja " -"de Ingeniería" +"de Ingeniería." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Esta es la temperatura de la cama para las capas excepto la inicial. Un " "valor de 0 significa que el filamento no admite la impresión en la Bandeja " -"de Alta Temperatura" +"de Alta Temperatura." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Temperatura de cama para las capas excepto la inicial. El valor 0 significa " -"que el filamento no es compatible para imprimir en la Bandeja PEI Texturizada" +"que el filamento no es compatible para imprimir en la Bandeja PEI " +"Texturizada." msgid "Initial layer" msgstr "Capa inicial" msgid "Initial layer bed temperature" -msgstr "Temperatura inicial de la cama en la capa" +msgstr "Temperatura de la cama durante la primera capa" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"Temperatura de cama de la capa inicial. Valor 0 significa que el filamento " +"no es compatible para imprimir en la Bandeja Fría SuperTack" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Esta es la temperatura de la cama de la primera capa. Un valor de 0 " "significa que el filamento no admite la impresión en la Bandeja Fría" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" +"Temperatura de la capa inicial. El valor 0 significa que el filamento no es " +"compatible para imprimir en la placa fría texturizada" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Esta es la temperatura de la cama de la primera capa. Un valor de 0 " "significa que el filamento no admite la impresión en la Bandeja de Ingeniería" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Esta es la temperatura de la cama de la primera capa. Un valor de 0 " "significa que el filamento no admite la impresión en la Bandeja de Alta " "Temperatura" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" -"Temperatura del lecho de la primera capa. El valor 0 significa que el " -"filamento no es compatible para imprimir en la Bandeja PEI Texturizada" +"Esta es la temperatura de la cama de la primera capa. Un valor de 0 " +"significa que el filamento no admite la impresión en la Bandeja PEI " +"Texturizada" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Tipos de cama que admite la impresora" msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Bandeja de Ingeniería" +msgstr "Bandeja Fría Lisa" msgid "Smooth High Temp Plate" +msgstr "Bandeja Lisa de Alta Temperatura" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" @@ -9882,7 +11524,7 @@ msgstr "El número de secuencias de impresión de otras capas" msgid "Other layers filament sequence" msgstr "Secuencia de filamentos de otras capas" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Este G-Code se inserta en cada cambio de capa antes de levantar z" msgid "Bottom shell layers" @@ -9891,7 +11533,7 @@ msgstr "Capas inferiores de cubierta" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Es el número de capas sólidas de la cubierta inferior, incluida la capa " "superficial inferior. Si el grosor calculado por este valor es menor que el " @@ -9899,14 +11541,14 @@ msgstr "" "incrementarán" msgid "Bottom shell thickness" -msgstr "Espesor de la cubierta inferior" +msgstr "Espesor mínimo de la cubierta inferior" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "El número de capas sólidas del fondo se incrementa al cortar si el grosor " "calculado por las capas de la cubierta es más fino que este valor. Esto " @@ -9918,25 +11560,63 @@ msgid "Apply gap fill" msgstr "Aplicar relleno de huecos" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" -msgstr "" -"Activa el relleno de huecos para las superficies seleccionadas. La longitud " -"mínima de hueco que se rellenará puede controlarse desde la opción filtrar " -"huecos pequeños que aparece más abajo.\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" -"Opciones: \n" -"1. En todas partes: Aplica el relleno de huecos a las superficies sólidas " -"superior, inferior e interna \n" -"2. Superficies superior e inferior: Aplica el relleno de huecos sólo a las " -"superficies superior e inferior. \n" -"3. En ninguna parte: Desactiva el relleno de huecos\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." +msgstr "" +"Activa el relleno de huecos para las superficies solidas seleccionadas. La " +"longitud mínima a rellenar puede ser ajustada en el campo 'Filtrar pequeños " +"huecos' más abajo.\n" +"\n" +"Opciones:\n" +"1. Siempre: Utilizar el relleno de huecos en las superficies sólidas " +"inferior, superior e internas para una máxima resistencia.\n" +"2. Superficies Superior e Inferior: Utilizar el relleno de huecos sólo en " +"las superficies superior e inferior, resultando en un equilibrio entre la " +"velocidad de impresión, reducción de la posibilidad de sobreextrusión en " +"rellenos sólidos y reduciendo la probabilidad de aparición de huecos de ojal " +"en las superficies superior e inferior.\n" +"3. Nunca: Deshabilita el relleno de huecos en todas las áreas de relleno " +"sólido.\n" +"\n" +"Nótese que si se utiliza el generador de perímetros clásico (ancho de línea " +"constante), el relleno de huecos puede ser aplicado entre perímetros, en los " +"casos en los que una línea de extrusión completa no pueda caber entre estos. " +"Ese relleno de huecos entre perímetros es independiente de este parámetro y " +"no se verá afectado por estos asjustes.\n" +"\n" +"Si desea desactivar todos los rellenos de huecos, incluidos aquellos " +"asociados al generador de perímetros Clásico, ajuste el parámetro 'Filtrar " +"pequeños huecos' a un número muy elevado, por ejemplo 999999.\n" +"\n" +"Se desaconseja encare no desactivar completamente el relleno de huecos, ya " +"que el relleno de huecos entre perímetros contribuye significativamente a la " +"resistencia de las piezas. Para modelos que resulten en un uso excesivo del " +"relleno de heucos, una alternativa puede ser usar el generador de perímetros " +"Arachne, y usar 'Aplicar relleno de huecos' con fines cosméticos para " +"controlar el acabado de las superficies superior e inferior." msgid "Everywhere" msgstr "En todas partes" @@ -9947,75 +11627,112 @@ msgstr "Superficies superior e inferior" msgid "Nowhere" msgstr "En ninguna parte" -msgid "Force cooling for overhang and bridge" -msgstr "Refrigeración forzada para el voladizo y el puente" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Habilite esta opción para optimizar la velocidad del ventilador de " -"refrigeración de la pieza para el voladizo y el puente para obtener una " -"mejor refrigeración" -msgid "Fan speed for overhang" -msgstr "Velocidad del ventilador para el voladizo" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Forzar el ventilador de la pieza a esta velocidad cuando se imprime el " -"puente o el perímetro del voladizo que tiene un gran grado de voladizo. Al " -"forzar la refrigeración de los voladizos y puentes se puede obtener una " -"mejor calidad para estas piezas" -msgid "Cooling overhang threshold" -msgstr "Umbral del voladizo de refrigeración" +msgid "Overhang cooling activation threshold" +msgstr "" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Fuerza al ventilador de refrigeración a una velocidad específica cuando el " -"grado de voladizo de la pieza impresa excede este valor. Expresado como " -"porcentaje, indica la anchura de la línea sin soporte de la capa inferior. " -"0% m significa forzar la refrigeración de todo el perímetro exterior sin " -"importar el grado de voladizo" -msgid "Bridge infill direction" -msgstr "Ángulo del relleno en puente" +msgid "External bridge infill direction" +msgstr "" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -"Anulación del ángulo de puenteo. Si se deja a cero, el ángulo de puente se " +"Control del ángulo de puentes. Si se deja a cero, el ángulo de puente se " "calculará automáticamente. De lo contrario, se utilizará el ángulo " "proporcionado para los puentes externos. Utilice 180° para el ángulo cero." -msgid "Bridge density" -msgstr "Densidad de puente" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "Internal bridge infill direction" +msgstr "" + +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" -"Densidad de puentes externos. 100% significa puente sólido. Por defecto es " -"100%." msgid "Bridge flow ratio" msgstr "Ratio de flujo en puentes" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" "Disminuya este valor ligeramente (por ejemplo 0,9) para reducir la cantidad " -"de material para mejorar o evitar el hundimiento de puentes." +"de material extruido en puentes, para mejorar o evitar el hundimiento.\n" +"\n" +"El valor final de flujo para puentes es calculado multiplicando este valor " +"por el valor de flujo del filamento, y en su caso, por el factor de flujo " +"del objeto." msgid "Internal bridge flow ratio" msgstr "Ratio de flujo de puentes internos" @@ -10023,54 +11740,169 @@ msgstr "Ratio de flujo de puentes internos" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" "Este valor regula el grosor de la capa puente interna. Es la primera capa " "sobre el relleno de baja densidad. Disminuya ligeramente este valor (por " -"ejemplo, 0,9) para mejorar la calidad de la superficie sobre el relleno de " -"baja densidad." +"ejemplo a 0,9) para mejorar la calidad de la superficie sobre el relleno de " +"baja densidad.\n" +"\n" +"El valor final de flujo para puentes internos es calculado multiplicando " +"este valor por el valor de flujo del filamento, y en su caso, por el factor " +"de flujo del objeto." msgid "Top surface flow ratio" msgstr "Ratio de flujo en superficie superior" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Este factor afecta a la cantidad de material de para relleno sólido " -"superior. Puede disminuirlo ligeramente para obtener un acabado suave de " -"superficie" +"Este factor afecta a la cantidad de material extruido en la superficie " +"sólida superior. Puede disminuirlo ligeramente para obtener un acabado más " +"suave de superficie \n" +"\n" +"El valor final de flujo para superficies superiores es calculado " +"multiplicando este valor por el valor de flujo del filamento, y en su caso, " +"por el factor de flujo del objeto." msgid "Bottom surface flow ratio" msgstr "Ratio de flujo en superficie inferior" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Este factor controla la cantidad de material extruido para el relleno sólido " +"de las superficies superior e inferior.\n" +"\n" +"El valor final de flujo es el producto de este valor, el factor de flujo del " +"filamente y, si procede, el factor de flujo del objeto." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Este factor afecta a la cantidad de material para el relleno sólido inferior" msgid "Precise wall" msgstr "Perímetro preciso" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Mejore la precisión de la cubierta ajustando la separación entre perímetros " -"exteriores. Esto también mejora la consistencia de la capa. \n" -"Nota: Este ajuste sólo tendrá efecto si la secuencia de el perímetro está " -"configurada como Interior-Exterior" msgid "Only one wall on top surfaces" msgstr "Sólo un perímetro en las capas superiores" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" -"Sólo un perímetro en la capas superiores, para dar más espacio al patrón de " -"relleno superior" +"Sólo un perímetro en la capas superiores planas, para dar más espacio al " +"patrón de relleno superior" msgid "One wall threshold" msgstr "Umbral para generar un solo perímetro" @@ -10087,11 +11919,11 @@ msgid "" "artifacts." msgstr "" "Si una superficie superior debe ser impresa y está parcialmente cubierta por " -"otra capa, no será considerada una capa superior donde su anchura esté por " +"otra capa, no será considerada una capa superior cuando su anchura esté por " "debajo ese valor. Esto puede ser de utilidad para que no se active el ajuste " -"perímetro en la parte superior' en las capas que solo deberían ser cubiertas " -"por perímetros. Este valor puede ser en mm o un % o del perímetro de " -"extrusión.\n" +"'Sólo un perímetro en las capas superiores' en las capas que solo deberían " +"ser cubiertas por perímetros. Este valor puede ser en mm o un % o grosor del " +"perímetro de extrusión.\n" "Advertencia: Si se activa, se pueden crear imperfecciones si tiene alguna " "característica fina en la siguiente capa, como letras. Ajuste a 0 esta " "opción para borrar esas imperfecciones." @@ -10101,7 +11933,7 @@ msgstr "Solo un perímetro en la primera capa" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Usar solo un perímetro en la primera capa, para dar más espacio en el patrón " "de relleno inferior" @@ -10111,37 +11943,37 @@ msgstr "Perímetros extra en voladizos" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Crear caminos de perímetros adicionales sobre voladizos pronunciados y áreas " -"donde los puentes no pueden ser anclados. " +"Crear perímetros adicionales sobre voladizos pronunciados y áreas donde los " +"puentes no pueden ser anclados." -msgid "Reverse on odd" -msgstr "Invertir en impar" +msgid "Reverse on even" +msgstr "Revertir en sentido inverso" msgid "Overhang reversal" msgstr "Inversión de voladizo" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" "Extruya los perímetros que tienen una parte sobre un voladizo en sentido " -"inverso en las capas impares. Este patrón alterno puede mejorar " -"drásticamente los voladizos pronunciados.\n" +"inverso en capas pares. Este patrón alterno puede mejorar drásticamente los " +"voladizos pronunciados.\n" "\n" -"Este ajuste también puede ayudar a reducir la deformación de la pieza debido " -"a la reducción de tensiones en los perímetros de la pieza." +"Este ajuste también puede ayudar a reducir el warping de la pieza debido a " +"la reducción de tensiones en las paredes de la pieza." msgid "Reverse only internal perimeters" msgstr "Invertir solo los perímetros internos" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10150,41 +11982,38 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Aplique la lógica de perímetros inversos sólo en los perímetros internos. \n" +"Aplique la lógica de perímetros inversos sólo en perímetros internos.\n" "\n" "Esta configuración reduce en gran medida las tensiones de la pieza, ya que " -"ahora se distribuyen en direcciones alternas. Esto debería reducir " -"deformaciones de la pieza mientras se mantiene la calidad de el perímetro " -"externo. Esta característica puede ser muy útil para materiales propensos a " -"deformarse, como ABS/ASA, y también para filamentos elásticos, como TPU y " -"Silk PLA. También puede ayudar a reducir deformaciones en regiones flotantes " -"en soportes.\n" +"ahora se distribuyen en direcciones alternas. Esto debería reducir el alabeo " +"de la pieza mientras se mantiene la calidad de la pared externa. Esta " +"característica puede ser muy útil para materiales propensos al alabeo, como " +"ABS/ASA, y también para filamentos elásticos, como TPU y Silk PLA. También " +"puede ayudar a reducir el alabeo en regiones flotantes sobre soportes.\n" "\n" "Para que este ajuste sea más eficaz, se recomienda establecer el Umbral " -"Inverso en 0 para que todos los perímetros internos se impriman en " -"direcciones alternas en las capas impares, independientemente de su ángulo " -"de voladizo." +"inverso en 0 para que todas las paredes internas se impriman en direcciones " +"alternas en capas iguales, independientemente de su grado de voladizo." msgid "Bridge counterbore holes" -msgstr "Agujeros del contrafuerte del puente" +msgstr "Crear puentes en agujeros con avellanado" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Esta opción crea puentes para los orificios avellanados, lo que permite " -"imprimirlos sin soporte. \n" -"Los modos disponibles son:\n" -" 1. Ninguno: No se crea ningún puente. \n" +"imprimirlos sin soporte. Los modos disponibles son:\n" +"1. Ninguno: No se crea ningún puente.\n" "2. Parcialmente Puenteado: Sólo se puentea una parte de la zona sin " -"soporte. \n" +"soporte.\n" "3. Capa de Sacrificio: Se crea una capa de sacrificio completa." msgid "Partially bridged" @@ -10203,62 +12032,98 @@ msgstr "Umbral de inversión de voladizo" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" "Número de mm que debe tener el voladizo para que la inversión se considere " -"útil. Puede ser un % o de la anchura del perímetro.\n" -"El valor 0 permite la inversión en todas las capas impares." - -msgid "Classic mode" -msgstr "Modo clásico" - -msgid "Enable this option to use classic mode" -msgstr "Activar esta opción para usar el modo clásico" +"útil. Puede ser % of el ancho del perímetro.\n" +"El valor 0 permite la inversión en cada capa par.\n" +"Cuando Detectar voladizo de pared no está activado, esta opción se ignora y " +"la inversión se produce en todas las capas pares." msgid "Slow down for overhang" -msgstr "Disminución de velocidad de voladizo" +msgstr "Disminuir velocidad en voladizos" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Habilite esta opción para ralentizar la impresión para diferentes grados de " "voladizo" msgid "Slow down for curled perimeters" -msgstr "Reducir velocidad para perímetros curvados" +msgstr "Reducir velocidad en perímetros curvados" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Active está opción para bajar la velocidad de impresión en las áreas donde " -"potencialmente podrían formarse perímetros curvados" +"Active está opción para bajar la velocidad de impresión en las áreas donde " +"potencialmente podrían formarse perímetros curvados hacía arriba. Por " +"ejemplo, se disminuirá la velocidad cuando se impriman voladizos en esquinas " +"afiladas, como la proa del modelo Benchy, reduciendo la deformación que " +"puede ser acumulada en múltiples capas.\n" +"Se recomienda usar esta función a menos que la ventilación de la impresora " +"sea lo suficientemente alta o imprima a una velocidad lo suficientemente " +"reducida como para que no se produzca el curvado de perímetros. Si se " +"imprime con una velocidad de perímetro elevada, esta función puede resultar " +"en artefactos o defectos, a causa de la gran variación de velocidad. Si nota " +"la presencia de artefactos, asegúrese de que tiene correctamente calibrado " +"el avance de presión lineal.\n" +"\n" +"Nota: Cuando esta opción está activada, los perímetros en voladizo se tratan " +"como voladizos, lo que significa que la velocidad de voladizo se aplica " +"incluso si el perímetro en voladizo forma parte de un puente. Por ejemplo, " +"cuando los perímetros están 100% en voladizo, sin ninguna pared que los " +"soporte por debajo, se aplicará la velocidad de voladizo del 100%." msgid "mm/s or %" msgstr "mm/s o %" -msgid "External" -msgstr "Externo" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Velocidad del puente y perímetro completo en voladizo" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Velocidad de las extrusiones de puentes exteriormente visibles.\n" +"\n" +"Adicionalmente, si se desactiva la función 'Reducir velocidad en perímetros " +"curvados' o se usa el método Clásico de voladizos, también se utilizará esta " +"velocidad para perímetros en voladizo con menos de un 13% de soporte, ya " +"sean parte de un puento o de un voladizo." msgid "Internal" msgstr "Interno" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Velocidad del puente interno. Si el valor es expresado como porcentaje, será " -"calculado en base a bridge_speed. El valor por defecto es 150%." +"Velocidad de los puntes internos. Si se expresa como un porcentaje, será " +"Calculado en base a la velocidad de puente. El valor por defecto es 150%." msgid "Brim width" msgstr "Ancho del borde de adherencia" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Distancia del modelo a la línea más externa del borde de adherencia" msgid "Brim type" @@ -10266,18 +12131,18 @@ msgstr "Tipo de borde de adherencia" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"Esto controla la generación del borde de adherencia en el lado exterior y/o " -"interior de los modelos. Auto significa que el ancho de borde de adherencia " +"Contro de la generación del borde de adherencia en el lado exterior y/o " +"interior de los modelos. Auto significa que el ancho de lborde de adherencia " "es analizado y calculado automáticamente." msgid "Brim-object gap" -msgstr "Espacio borde de adherencia-objeto" +msgstr "Espaciado borde de adherencia-objeto" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Un hueco entre la línea más interna del borde de adherencia y el objeto " "puede hacer que el borde de adherencia se retire más fácilmente" @@ -10286,50 +12151,65 @@ msgid "Brim ears" msgstr "Orejas de borde" msgid "Only draw brim over the sharp edges of the model." -msgstr "Solo dibujar bordes sobre los bordes afilados del modelo." +msgstr "Solo dibujar bordes en los bordes afilados del modelo." msgid "Brim ear max angle" -msgstr "Máximo ángulo del borde de la oreja" +msgstr "Ángulo máximo de las Orejas de borde" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Máximo ángulo para dejar que el borde de oreja aparezca.\n" +"Ángulo máxima para el que generar Orejas de borde.\n" "Si se ajusta a 0, no se creará ningún borde.\n" -"Si se ajusta a ~180, se creará el borde en todo menos en las secciones " +"Si se ajusta a ~180, se creará el borde en todas las secciones menos en las " "rectas." msgid "Brim ear detection radius" -msgstr "Radio de detección de borde de oreja" +msgstr "Radio de detección de Orejas de borde" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "La geometría se verá diezmada antes de detectar angulos agudos. Este " "parámetro indica la longitud mínima de desviación para el diezmado\n" "0 para desactivar" -msgid "Compatible machine" -msgstr "Máquina compatible" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "máquina compatible ascendente" -msgid "Compatible machine condition" -msgstr "Condición de máquina compatible" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Perfiles de proceso compatibles" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Una expresión booleana utilizando valores de configuración de un perfil " +"existente. Si esta expresión es verdadera, el perfil será considerado " +"compatible con el perfil de impresión activo." -msgid "Compatible process profiles condition" -msgstr "Condición de los perfiles de proceso compatibles" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" -msgstr "Imprimir la secuencia, capa por capa u objeto por objeto" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Una expresión booleana que utiliza los valores de configuración de un perfil " +"de impresión activo. Si esta expresión se evalúa como verdadera, este perfil " +"se considera compatible con el perfil de impresión activo." + +msgid "Print sequence, layer by layer or object by object." +msgstr "Secuencia de impresión, capa a capa u objeto por objeto" msgid "By layer" msgstr "Por capa" @@ -10340,52 +12220,49 @@ msgstr "Por objeto" msgid "Intra-layer order" msgstr "Orden dentro de la capa" -msgid "Print order within a single layer" -msgstr "Orden de impresión en una sola capa" +msgid "Print order within a single layer." +msgstr "Orden de impresión dentro de cada capa" msgid "As object list" msgstr "Como lista de objetos" msgid "Slow printing down for better layer cooling" msgstr "" -"Reducir la velocidad de impresión para mejorar el refrigeración de las capas" +"Reducir la velocidad de impresión para mejorar la refrigeración de las capas" msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Active esta opción para reducir la velocidad de impresión para que el tiempo " -"de la capa final no sea inferior al umbral de tiempo de la capa en \"Umbral " +"final de la capa no sea inferior al umbral de tiempo de la capa en \"Umbral " "de velocidad máxima del ventilador\", de modo que la capa pueda enfriarse " -"durante más tiempo. Esto puede mejorar la calidad del refrigeración para las " -"agujas y los detalles pequeños" +"durante más tiempo. Esto puede mejorar la calidad del refrigeración para los " +"detalles pequeños y esquirlas." msgid "Normal printing" msgstr "Impresión normal" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "La aceleración por defecto tanto de la impresión normal como del " -"desplazamiento excepto la primera capa" - -msgid "mm/s²" -msgstr "mm/s²" +"desplazamiento excepto para la primera capa" msgid "Default filament profile" msgstr "Perfil de filamento por defecto" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" "Perfil de filamento por defecto cuando se cambia a este perfil de máquina" msgid "Default process profile" msgstr "Perfil de proceso por defecto" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "" "Perfil de proceso por defecto cuando se cambia a este perfil de máquina" @@ -10401,47 +12278,47 @@ msgid "Fan speed" msgstr "Velocidad del ventilador" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Velocidad del ventilador de extracción durante la impresión, esta velocidad " -"sobrescribirá la velocidad en el GCode personalizado del filamento" +"sobrescribirá la velocidad en el G-code personalizado del filamento." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Velocidad del ventilador de extracción una vez finalizada la impresión" msgid "No cooling for the first" msgstr "No refrigerar las primeras" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Desactivar todos los ventiladores de refrigeración en las primeras capas. El " -"ventilador de la primera capa debe estar apagado para conseguir una mejor " -"adhesión de la bandeja de impresión" +"ventilador de la primera capa suele estar apagado para conseguir una mejor " +"adhesión con la superficie de impresión" msgid "Don't support bridges" msgstr "No soportar puentes" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "No crear soportes en toda el área de los puentes. Los puentes normalmente " "pueden imprimirse directamente sin soporte si no son muy largos" -msgid "Thick bridges" -msgstr "Puentes gruesos" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" -"Si están activados, los puentes son más fiables, pueden salvar distancias " -"más largas, pero pueden tener peor aspecto. Si están desactivados, los " -"puentes se ven mejor pero son fiables sólo para distancias más cortas." +"Si se activa, los puentes son más fiables, pueden salvar distancias más " +"largas, pero pueden tener peor acabado. Si se desactiva, los puentes se ven " +"mejor pero son fiables sólo para distancias más cortas." msgid "Thick internal bridges" msgstr "Puentes gruesos internos" @@ -10451,72 +12328,85 @@ msgid "" "have this feature turned on. However, consider turning it off if you are " "using large nozzles." msgstr "" -"Si está activada, se utilizarán puentes internos gruesos. Normalmente se " -"recomienda tener esta función activada. Sin embargo, considera desactivarla " -"si utilizas boquillas grandes." +"Si se activa, se utilizarán puentes internos gruesos. Normalmente se " +"recomienda tener esta función activada. Sin embargo, considere desactivarla " +"si utilizas boquillas de diámetros elevados." -msgid "Don't filter out small internal bridges (beta)" -msgstr "No filtrar los pequeños puentes internos (beta)" +msgid "Extra bridge layers (beta)" +msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" + +msgid "Disabled" +msgstr "Desactivado" + +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" "By default, small internal bridges are filtered out and the internal solid " "infill is printed directly over the sparse infill. This works well in most " "cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" -"Esta opción puede ayudar a reducir el pillowing en superficies superiores en " -"modelos muy inclinados o curvados.\n" -"\n" -"Por defecto, los pequeños puentes internos se filtran y el relleno sólido " -"interno se imprime directamente sobre el relleno de baja densidad. Esto " -"funciona bien en la mayoría de los casos, acelerando la impresión sin " -"comprometer demasiado la calidad de la superficie superior. \n" -"\n" -"Sin embargo, en modelos muy inclinados o curvados, especialmente cuando se " -"utiliza una densidad de relleno de baja densidad demasiado baja, esto puede " -"dar lugar a la curvatura del relleno sólido no soportado, causando " -"pillowing.\n" -"\n" -"Activando esta opción se imprimirá la capa puente interna sobre el relleno " -"sólido interno ligeramente sin soporte. Las opciones siguientes controlan la " -"cantidad de filtrado, es decir, la cantidad de puentes internos creados.\n" -"\n" -"Desactivado - Desactiva esta opción. Este es el comportamiento por defecto y " -"funciona bien en la mayoría de los casos.\n" -"\n" -"Filtrado limitado - Crea puentes internos en superficies muy inclinadas, " -"evitando crear puentes internos innecesarios. Funciona bien en la mayoría de " -"los modelos difíciles.\n" -"\n" -"Sin filtro: crea puentes interiores en todos los posibles voladizos " -"interiores. Esta opción es útil para modelos de superficie superior muy " -"inclinada. Sin embargo, en la mayoría de los casos crea demasiados puentes " -"innecesarios." - -msgid "Disabled" -msgstr "Deshabilitados" msgid "Limited filtering" msgstr "Filtrado limitado" @@ -10525,38 +12415,38 @@ msgid "No filtering" msgstr "Sin filtro" msgid "Max bridge length" -msgstr "Distancia máxima de puentes" +msgstr "Distancia máxima de puentes sin soporte" msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"Esta es la longitud máxima de los puentes que no necesitan soporte. Ajústalo " -"a 0 si quieres que todos los puentes sean soportados, y ajústalo a un valor " -"muy grande si no quieres que ningún puente sea soportado." +"Esta es la longitud máxima para imprimir puentes sin soportes. Ajústalo a 0 " +"si quieres que todos los puentes sean soportados, y ajústalo a un valor muy " +"grande si no quieres que ningún puente sea soportado." msgid "End G-code" msgstr "G-Code final" -msgid "End G-code when finish the whole printing" -msgstr "Finalizar el G-Code cuando termine la impresión completa" +msgid "End G-code when finishing the entire print." +msgstr "G-Code ejecutado en el final de la impresión completa" -msgid "Between Object Gcode" -msgstr "Entre Objetos G-Code" +msgid "Between Object G-code" +msgstr "G-Code ejecutado entre Objetos" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"Insertar G-Code entre objetos. Este parámetro sólo tendrá efecto cuando " -"imprima sus modelos objeto por objeto" +"G-Code insertado entre objetos. Este parámetro sólo tendrá efecto cuando " +"imprima sus modelos objeto por objeto." -msgid "End G-code when finish the printing of this filament" -msgstr "Terminar el G-Code cuando se termine de imprimir este filamento" +msgid "End G-code when finishing the printing of this filament." +msgstr "G-Code ejecutado cuando se termine de imprimir con este filamento" msgid "Ensure vertical shell thickness" -msgstr "Detección de perímetros delgados" +msgstr "Garantizar el grosor vertical de las cubiertas" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " @@ -10569,18 +12459,18 @@ msgid "" "Default value is All." msgstr "" "Añadir relleno sólido cerca de superficies inclinadas para garantizar el " -"grosor vertical del perímetro (capas sólidas superior+inferior)\n" +"grosor vertical de las cubiertas (capas sólidas superior+inferior)\n" "Ninguno: No se añadirá relleno sólido en ninguna parte.\n" "Precaución: Utilice esta opción con cuidado si su modelo tiene superficies " "inclinadas\n" -"Sólo crítico: Evite añadir relleno sólido en perímetros\n" +"Sólo críticos: Evite añadir relleno sólido en perímetros\n" "Moderado: Añadir relleno sólido sólo para superficies muy inclinadas \n" "Todas: Añadir relleno sólido para todas las superficies inclinadas " "adecuadas\n" "El valor por defecto es Todas." msgid "Critical Only" -msgstr "Sólo Críticos" +msgstr "Sólo críticos" msgid "Moderate" msgstr "Moderado" @@ -10588,29 +12478,29 @@ msgstr "Moderado" msgid "Top surface pattern" msgstr "Patrón de relleno cubierta superior" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Patrón de líneas del relleno de la superficie superior" -msgid "Concentric" -msgstr "Concéntrico" - -msgid "Rectilinear" -msgstr "Rectilíneo" - msgid "Monotonic" msgstr "Monotónico" msgid "Monotonic line" -msgstr "Línea Contínua" +msgstr "Líneas monotónicas" + +msgid "Rectilinear" +msgstr "Rectilíneo" msgid "Aligned Rectilinear" -msgstr "Alineación Rectilinea" +msgstr "Rectilineo alineado" + +msgid "Concentric" +msgstr "Concéntrico" msgid "Hilbert Curve" -msgstr "Curva Hilbert" +msgstr "Curva de Hilbert" msgid "Archimedean Chords" -msgstr "Acordes de Arquímedes" +msgstr "Espiral de Arquímedes" msgid "Octagram Spiral" msgstr "Octograma en Espiral" @@ -10618,7 +12508,7 @@ msgstr "Octograma en Espiral" msgid "Bottom surface pattern" msgstr "Patrón de relleno de cubierta inferior" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" "Patrón de líneas del relleno de la superficie de la cubierta inferior, no " "del relleno del puente" @@ -10630,24 +12520,24 @@ msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " "infill be enabled, the concentric pattern will be used for the small area." msgstr "" -"Patrón lineal de relleno sólido interno, si se activa la detección de " -"relleno sólido interno nattow, se utilizará el patrón concéntrico para el " -"área pequeña." +"Patrón lineal de relleno sólido interno. Si se activa la detección de " +"relleno sólido interno delgado, se utilizará el patrón concéntrico para las " +"áreas pequeñas." msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Ancho de extrusión del perímetro externo. Si se expresa cómo %, se calculará " +"Ancho de línea del perímetro externo. Si se expresa cómo %, se calculará " "sobre el diámetro de la boquilla." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"Velocidad del perímetro exterior, que es el más externo y visible. Se " -"utiliza para ser más lento que la velocidad del perímetro interior para " -"obtener una mejor calidad." +"Velocidad del perímetro exterior, que es el más externo y visible. Usar una " +"velocidad menor que la del perímetro interior paraobtener un mejor acabado " +"superficial." msgid "Small perimeters" msgstr "Perímetros pequeños" @@ -10660,26 +12550,26 @@ msgid "" msgstr "" "Este ajuste independiente afectará a la velocidad de los perímetros con " "radio <= small_perimeter_threshold (normalmente orificios). Si se expresa " -"como porcentaje (por ejemplo: 80%) se calculará sobre el ajuste de velocidad " -"del perímetro exterior anterior. Póngalo a cero para auto." +"como un porcentaje (por ejemplo: 80%) se calculará en base al ajuste de " +"velocidad del perímetro exterior anterior. Póngalo a cero para auto." msgid "Small perimeters threshold" -msgstr "Umbral Perímetral Pequeño" +msgstr "Umbral de Perímetros pequeños" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" -"Esto configura el umbral para longitud de perímetro pequeño. El umbral por " +"Esto configura el umbral de longitud de perímetros pequeños. El umbral por " "defecto es 0mm" msgid "Walls printing order" msgstr "Orden de impresión de perímetros" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10689,18 +12579,15 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Imprima la secuencia de los perímetros internos (interiores) y externos " -"(exteriores). \n" +"Secuencia de impresión de los perímetros internos y externos.\n" "\n" "Utilice Interior/Exterior para obtener los mejores voladizos. Esto se debe a " "que los perímetros salientes pueden adherirse a un perímetro vecino durante " @@ -10710,29 +12597,27 @@ msgstr "" "\n" "Utilice Interior/Exterior/Interior para obtener el mejor acabado de " "superficie exterior y precisión dimensional, ya que el perímetro exterior se " -"imprime sin perturbaciones desde un perímetro interior. Sin embargo, el " +"imprime sin perturbaciones por un perímetro interior. Sin embargo, el " "rendimiento del voladizo se reducirá al no haber un perímetro interno contra " "el que imprimir el perímetro externo. Esta opción requiere un mínimo de 3 " "perímetros para ser efectiva, ya que imprime primero los perímetros " "interiores a partir del 3er perímetro, después el perímetro exterior y, " "finalmente, el primer perímetro interior. En la mayoría de los casos, se " -"recomienda utilizar esta opción en lugar de la opción Exterior/Interior. \n" +"recomienda utilizar esta opción en lugar de la opción Exterior/Interior.\n" "\n" "Utilice Exterior/Interior para obtener la misma calidad en los perímetros " "exteriores y la misma precisión dimensional que con la opción Interior/" -"Exterior/Interior. Sin embargo, las uniones Z parecerán menos consistentes " -"ya que la primera extrusión de una nueva capa comienza en una superficie " -"visible.\n" -" " +"Exterior/Interior. Sin embargo, las costuras Z tendrán un peor acabado ya " +"que la primera extrusión de cada capa comienza en una superficie visible." msgid "Inner/Outer" -msgstr "Interno/Externo" +msgstr "Interior/Exterior" msgid "Outer/Inner" -msgstr "Externo/Interno" +msgstr "Exterior/Interior" msgid "Inner/Outer/Inner" -msgstr "Interno/Externo/Interno" +msgstr "Interior/Exterior/Interior" msgid "Print infill first" msgstr "Imprimir relleno primero" @@ -10742,21 +12627,21 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" "Orden de los perímetros/relleno. Cuando la casilla no está marcada, los " -"muros se imprimen primero, lo que funciona mejor en la mayoría de los " +"perímetros se imprimen primero, lo que funciona mejor en la mayoría de los " "casos.\n" "\n" "Imprimir primero el relleno puede ayudar con voladizos extremos ya que los " -"muros tienen el relleno vecino al que adherirse. Sin embargo, el relleno " -"empujará ligeramente hacia fuera los perímetros impresos donde se une a " -"ellos, lo que resulta en un peor acabado de la superficie exterior. También " -"puede hacer que el relleno brille a través de las superficies externas de la " -"pieza." +"perímetros tienen un relleno cercano al que adherirse. Sin embargo, el " +"relleno empujará ligeramente hacia fuera los perímetros impresos donde se " +"une a ellos, lo que resulta en un peor acabado de la superficie exterior. " +"También puede hacer que el relleno brille a través de las superficies " +"externas de la pieza." msgid "Wall loop direction" msgstr "Dirección del bucle de perímetro" @@ -10766,21 +12651,20 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"La dirección en la que se extruyen los bucles del muro cuando se mira desde " -"arriba.\n" +"La dirección en la que se extruyen los bucles de pared cuando se mira hacia " +"abajo desde la parte superior.\n" "\n" "Por defecto, todos los muros se extruyen en el sentido contrario a las " -"agujas del reloj, a menos que esté activada la opción Invertir en impares. " -"Establecer esta opción a cualquier opción que no sea Auto forzará la " -"dirección de el perímetro independientemente de la opción Invertir en " -"impar.\n" +"agujas del reloj, a menos que esté activada la opción Invertir en par. " +"Establecer esto a cualquier opción que no sea Auto forzará la dirección de " +"la pared independientemente de la Inversión en par.\n" "\n" -"Esta opción se desactivará si se activa el modo jarrón en espiral." +"Esta opción estará desactivada si el modo jarrón en espiral está activado." msgid "Counter clockwise" msgstr "En sentido contrario a las agujas del reloj" @@ -10806,14 +12690,14 @@ msgid "" "object printing." msgstr "" "Distancia de la punta de la boquilla a la tapa. Usado para evitar la " -"colisión con la impresión por objeto." +"colisión en la impresión por objeto." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." msgstr "" -"El radio de claridad alrededor del extrusor. Se utiliza para evitar la " -"colisión con la impresión por objeto." +"El radio de exclusión alrededor del extrusor. Se utiliza para evitar la " +"colisión en la impresión por objeto." msgid "Nozzle height" msgstr "Altura de la boquilla" @@ -10822,7 +12706,7 @@ msgid "The height of nozzle tip." msgstr "La altura de la punta de la boquilla." msgid "Bed mesh min" -msgstr "Malla de cama mínimo" +msgstr "Punto mínimo para el mallado de superficie" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10835,18 +12719,18 @@ msgid "" "means there are no limits, thus allowing probing across the entire bed." msgstr "" "Esta opción establece el punto mínimo para el área de malla de la cama " -"permitida. Debido al desplazamiento XY de la sonda, la mayoría de las " -"impresoras no pueden sondear toda la cama. Para garantizar que el punto de " -"la sonda no salga del área de la cama, los puntos mínimo y máximo de la " -"malla de la cama deben establecerse adecuadamente. Snapmaker Orca se asegura de " -"que los valores de madaptive_bed_mesh_min/adaptive_bed_mesh_max no superen " -"estos puntos mínimo/máximo. Esta información normalmente se puede obtener " -"del fabricante de la impresora. La configuración por defecto es (-99999, " -"-99999), lo que significa que no hay límites, lo que permite el sondeo a " -"través de toda la cama." +"permitida. Debido a la distancia XY de la sonda respecto a la boquilla, la " +"mayoría de las impresoras no pueden sondear toda la cama. Para garantizar " +"que el punto de mdeición no excede el área de la cama, los puntos mínimo y " +"máximo de la malla de la cama deben establecerse adecuadamente. Snapmaker Orca " +"se asegura de que los valores de adaptive_bed_mesh_min/adaptive_bed_mesh_max " +"no superen estos puntos mínimo/máximo. Esta información normalmente se puede " +"obtener del fabricante de la impresora. La configuración por defecto es " +"(-99999, -99999), lo que significa que no hay límites, lo que permite el " +"sondeo en todo el área de la cama." msgid "Bed mesh max" -msgstr "Malla de cama máxima" +msgstr "Punto máximo para el mallado de superficie" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10859,26 +12743,26 @@ msgid "" "means there are no limits, thus allowing probing across the entire bed." msgstr "" "Esta opción establece el punto máximo para el área de malla de la cama " -"permitida. Debido al desplazamiento XY de la sonda, la mayoría de las " -"impresoras no pueden sondear todo el lecho. Para garantizar que el punto de " -"la sonda no salga del área de la cama, los puntos mínimo y máximo de la " -"malla de la cama deben establecerse adecuadamente. Snapmaker Orca se asegura de " -"que los valores de daptive_bed_mesh_min/adaptive_bed_mesh_max no superen " -"estos puntos mínimo/máximo. Esta información normalmente se puede obtener " -"del fabricante de la impresora. La configuración por defecto es (99999, " -"99999), lo que significa que no hay límites, lo que permite el sondeo a " -"través de toda la cama." +"permitida. Debido a la distancia XY de la sonda respecto a la boquilla, la " +"mayoría de las impresoras no pueden sondear toda la cama. Para garantizar " +"que el punto de mdeición no excede el área de la cama, los puntos mínimo y " +"máximo de la malla de la cama deben establecerse adecuadamente. Snapmaker Orca " +"se asegura de que los valores de adaptive_bed_mesh_min/adaptive_bed_mesh_max " +"no superen estos puntos mínimo/máximo. Esta información normalmente se puede " +"obtener del fabricante de la impresora. La configuración por defecto es " +"(-99999, -99999), lo que significa que no hay límites, lo que permite el " +"sondeo en todo el área de la cama." msgid "Probe point distance" -msgstr "Distancia de punto de sonda" +msgstr "Distancia entre puntos de medición" msgid "" "This option sets the preferred distance between probe points (grid size) for " "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" -"Esta opción establece la distancia preferida entre puntos de sonda (tamaño " -"de cuadrícula) para las direcciones X e Y, siendo el valor predeterminado 50 " -"mm tanto para X como para Y." +"Esta opción establece la distancia preferida entre puntos de medición " +"(tamaño de cuadrícula) para las direcciones X e Y, siendo el valor " +"predeterminado 50mm tanto para X como para Y." msgid "Mesh margin" msgstr "Margen de malla" @@ -10888,89 +12772,247 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" "Esta opción determina la distancia adicional en la que debe expandirse el " -"área de malla del lecho de adaptación en las direcciones XY." +"área de malla adaptativa en las direcciones XY." + +msgid "Grab length" +msgstr "" msgid "Extruder Color" msgstr "Color del extrusor" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Sólo se utiliza como ayuda visual en la interfaz de usuario" msgid "Extruder offset" msgstr "Offset del extrusor" msgid "Flow ratio" -msgstr "Proporción de flujo" +msgstr "Ratio de flujo" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" -"El material puede tener un cambio volumétrico después de cambiar entre " -"estado fundido y estado cristalino. Este ajuste cambia proporcionalmente " -"todo el flujo de extrusión de este filamento en G-Code. El rango de valores " -"recomendado es entre 0.95 y 1.05. Tal vez usted puede ajustar este valor " -"para obtener una superficie plana adecuada cuando hay un ligero sobre flujo " -"o infra flujo" +"El material puede sufrir un cambio volumétrico tras cambiar entre el estado " +"fundido y estado cristalino. Este ajuste cambia proporcionalmente todo el " +"flujo de extrusión de este filamento en el G-Code. El rango de valores " +"recomendado es entre 0.95 y 1.05. Puede ajustar ligeramente este valor para " +"obtener una mejor superficie plana cuando hay una ligera sobre-extrusión o " +"infra-extrusión." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"El material puede sufrir un cambio volumétrico tras cambiar entre el estado " +"fundido y estado cristalino. Este ajuste cambia proporcionalmente todo el " +"flujo de extrusión de este filamento en el G-Code. El rango de valores " +"recomendado es entre 0.95 y 1.05. Puede ajustar ligeramente este valor para " +"obtener una mejor superficie plana cuando hay una ligera sobre-extrusión o " +"infra-extrusión.\n" +"\n" +"El factor de flujo final del objeto es este valor multiplicado por el factor " +"de flujo del filamento." msgid "Enable pressure advance" msgstr "Activar Avance de Presión Lineal" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" "Al activar Avance de Presión Lineal, el resultado de auto calibración se " "sobrescribirá." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Pressure Advance(Klipper) AKA Factor de avance lineal(Marlin)" +msgid "Enable adaptive pressure advance (beta)" +msgstr "Activar Avance de Presión Lineal Adaptativo (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Al aumentar la velocidad de impresión (y, por tanto, el flujo volumétrico a " +"través de la boquilla) y las aceleraciones, se ha observado que el valor PA " +"efectivo suele disminuir. Esto significa que un único valor de PA no es " +"siempre 100% optimo para todas las características y que se suele utilziar " +"un valor de compromiso que no provoque demasiado abombamiento en las " +"características con velocidades de flujo y aceleraciones más bajas y que, al " +"mismo tiempo, no provoque fallos en las características más rápidas.\n" +"\n" +"Esta función pretende abordar esta limitación modelando la respuesta del " +"sistema de extrusión de su impresora en función de la velocidad de flujo " +"volumétrico y la aceleración a la que está imprimiendo. Internamente, genera " +"un modelo ajustado que puede extrapolar el avance de presión necesario para " +"cualquier velocidad de flujo volumétrico y aceleración, que luego se emite a " +"la impresora en función de las condiciones de impresión actuales.\n" +"\n" +"Cuando se activa, el valor de avance de presión anterior se anula. Sin " +"embargo, se recomienda encarecidamente un valor predeterminado razonable que " +"actúe como una alternativa de resguardo y para los cambios de cabezal.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Medidas de avance lineal de presión adaptativo (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Añada conjuntos de valores de avance de presión (PA), las velocidades de " +"flujo volumétrico y las aceleraciones a las que se midieron, separados por " +"una coma. Un conjunto de valores por línea. Por ejemplo \n" +"0,04,3,96,3000 \n" +"0,033,3,96,10000 \n" +"0,029,7,91,3000 \n" +"0,026,7,91,10000\n" +"\n" +"Cómo calibrar: \n" +"1. Ejecute la prueba de avance lineal de presión para al menos 3 velocidades " +"por cada valor de aceleración. Se recomienda que la prueba se ejecute para " +"al menos la velocidad de los perímetros externos, la velocidad de los " +"perímetros internos y la velocidad de impresión de características más " +"rápida en su perfil (por lo general es el relleno de baja densidad o " +"sólido). A continuación, ejecútelos para las mismas velocidades para las " +"aceleraciones de impresión más lentas y más rápidas, y no más rápido que la " +"aceleración máxima recomendada según lo dado por el \"input shaper\" de " +"Klipper.\n" +"2. Tome nota del valor óptimo de PA para cada velocidad de flujo volumétrico " +"y aceleración. Puede encontrar el valor de flujo seleccionando flujo en el " +"desplegable del esquema de colores y moviendo el deslizador horizontal sobre " +"las líneas del patrón PA. El valor númerico debería ser visible en la parte " +"inferior de la página. El valor ideal de PA debería disminuir cuanto mayor " +"sea el flujo volumétrico. Si no es así, confirme que su extrusor funciona " +"correctamente. Cuanto más lento y con menos aceleración imprimas, mayor será " +"el rango de valores PA aceptables. Si no se aprecia ninguna diferencia, " +"utilice el valor PA de la prueba más rápida.\n" +"3. Introduzca los trios de valores PA, Flujo y Aceleraciones en el cuadro de " +"texto que aparece aquí y guarde su perfil de filamento." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Activación del Avance de Presión Adaptativo para Voladizos (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Habilitar PA adaptable para voladizos, así como cuando el flujo cambia " +"dentro de una misma característica. Se trata de una opción experimental, ya " +"que si el perfil PA no se ajusta con precisión, causará problemas de " +"uniformidad en las superficies externas antes y después de los voladizos.\n" + +msgid "Pressure advance for bridges" +msgstr "Avance de Presión Lineal para puentes" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Valor de Avance de Presión para puentes. Establecer a 0 para desactivar.\n" +"\n" +"Un valor de PA más bajo al imprimir puentes ayuda a reducir la aparición de " +"una ligera sub-extrusión inmediatamente después de los puentes. Esto es " +"causado por la caída de presión en la boquilla cuando se imprime en el aire, " +"y un PA más bajo ayuda a contrarrestar este efecto." + msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." msgstr "" -"Ancho de extrusión por defecto si otros anchos de línea no están a 0. Si se " -"expresa cómo %, se calculará sobre el diámetro de la boquilla." +"Ancho de línea por defecto si otros anchos de línea están a 0. Si se expresa " +"cómo %, se calculará en base al diámetro de la boquilla." msgid "Keep fan always on" msgstr "Mantener el ventilador siempre encendido" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Si se activa este ajuste, el ventilador nunca se detendrá y funcionará al " "menos a la velocidad mínima para reducir la frecuencia de arranque y parada" msgid "Don't slow down outer walls" -msgstr "No frenar en los perímetros externos" +msgstr "No reducir la velocidad en los perímetros externos" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "Si está activada, esta configuración garantizará que los perímetros externos " "no se ralenticen para cumplir el tiempo de capa mínimo. Esto es " "especialmente útil en los siguientes escenarios:\n" -"\n" -" 1. Para evitar cambios de brillo al imprimir filamentos brillantes\n" -"2. Para evitar cambios en la velocidad de el perímetros externo que pueden " -"crear ligeros artefactos de perímetro que aparecen como z banding\n" +"1. Para evitar cambios de brillo al imprimir filamentos brillantes\n" +"2. Para evitar cambios en la velocidad del perímetro externo que pueden " +"crear ligeros artefactos con apariencia de Z banding\n" "3. Para evitar imprimir a velocidades que provoquen VFA (artefactos finos) " -"en las perímetros externas\n" -"\n" +"en los perímetros externos" msgid "Layer time" msgstr "Tiempo de capa" @@ -10978,24 +13020,26 @@ msgstr "Tiempo de capa" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "El ventilador de refrigeración de la pieza se activará para las capas cuyo " "tiempo estimado sea inferior a este valor. La velocidad del ventilador se " -"interpola entre las velocidades mínima y máxima del ventilador según el " -"tiempo de impresión de las capas" +"interpola entre las velocidades mínima y máxima del ventilador en función " +"del tiempo de impresión de la cada capa" msgid "Default color" msgstr "Color por defecto" -msgid "Default filament color" -msgstr "Color de filamento por defecto" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Anotaciones de filamento" msgid "You can put your notes regarding the filament here." -msgstr "Puede colocar sus anotaciones acerca del filamento aquí." +msgstr "Puede escribir sus notas sobre el filamento aquí." msgid "Required nozzle HRC" msgstr "HRC de boquilla requerido" @@ -11004,50 +13048,115 @@ msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"HRC mínimo de boquilla requerido para imprimir el filamento. Cero significa " -"no comprobar el HRC de la boquilla." +"Dureza HRC mínima de boquilla requerida para imprimir el filamento. Cero " +"significa que no se comprobará el valor HRC de la boquilla." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" -"Este ajuste representa la cantidad de volumen de filamento puede ser " -"derretido extruido por segundo. La velocidad de impresión está limitado por " -"cuanta velocidad, en caso de velocidad demasiado alta o no razonable. No " -"puede ser cero" - -msgid "mm³/s" -msgstr "mm³/s" +"Este ajuste representa la cantidad de volumen de filamento que puede ser " +"derretido y extruido por segundo. La velocidad de impresión se verá limitada " +"por esta velocidad volumétrica, en caso de velocidades demasiado altas o " +"poco razonables. No puede ser cero" msgid "Filament load time" msgstr "Tiempo de carga de filamento" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tiempo para cargar un nuevo filamento cuando se cambia de filamento. Sólo " -"para estadísticas" +"Tiempo que se tarda en cargar un nuevo filamento cuando se cambia de " +"filamento. Generalmente sólo aplicable a multi-material con un único " +"extrusor. Típicamente 0 para máquinas multi-herramienta. Sólo usado para " +"elaborar estadísticas." msgid "Filament unload time" msgstr "Tiempo de descarga del filamento" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tiempo para descargar el filamento viejo cuando se cambia de filamento. Sólo " -"para las estadísticas" +"Tiempo que se tarda en descargar un nuevo filamento cuando se cambia de " +"filamento. Generalmente sólo aplicable a multi-material con un único " +"extrusor. Típicamente 0 para máquinas multi-herramienta. Sólo usado para " +"elaborar estadísticas." + +msgid "Tool change time" +msgstr "Tiempo de cambio de herramienta" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Tiempo que se tarda en cambiar cabezal. Aplciable sólo a máquinas multi-" +"herramientas. Para máquinas mono-herramientas, es 0. Sólo usado para " +"elaborar estadísticas." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "El diámetro del filamento se utiliza para calcular la extrusión en el G-" -"Code, por lo que es importante y debe ser preciso" +"Code, por lo que es importante y debe ser preciso." msgid "Pellet flow coefficient" msgstr "Coeficiente de Flujo de Pellets" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -11061,43 +13170,74 @@ msgstr "" "Internamente se convierte a filament_diameter. Todos los demás cálculos de " "volumen siguen siendo los mismos.\n" "\n" -"diámetro_filamento = sqrt( (4 * coeficiente_flujo_pellets) / PI )" +"filament_diameter = sqrt( (4 * coeficiente_flujo_pellets) / PI )" -msgid "Shrinkage" -msgstr "Contracción" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Contracción (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" -"Introduzca el porcentaje de encogimiento que tendrá el filamento después de " +"Introduzca el factor de contracción que sufrirá el filamento después de " "enfriarse ('94% i' si mide 94mm en lugar de 100mm). La pieza se escalará en " "X-Y para compensar. Sólo se tiene en cuenta el filamento utilizado para el " -"perímetro.\n" +"perímetro exterior.\n" "Asegúrese de dejar suficiente espacio entre los objetos, ya que esta " "compensación se realiza después de las comprobaciones." +msgid "Shrinkage (Z)" +msgstr "Contracción (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Introduzca el porcentaje de contracción que tendrá el filamento después de " +"enfriarse (94% si mide 94mm en lugar de 100mm). La pieza se escalará en Z " +"para compensar." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Velocidad de carga" msgid "Speed used for loading the filament on the wipe tower." -msgstr "Velocidad usada para cargar el filamento de la torre de purga." +msgstr "Velocidad usada para cargar el filamento en la torre de purga." msgid "Loading speed at the start" msgstr "Velocidad inicial de carga" msgid "Speed used at the very beginning of loading phase." -msgstr "Velocidad usada en la fase de carga temprana." +msgstr "Velocidad usada al comenzar la fase de carga." msgid "Unloading speed" msgstr "Velocidad de descarga" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Velocidad usada para descargar el filamento en la torre de purga (no afecta " @@ -11116,13 +13256,13 @@ msgid "Delay after unloading" msgstr "Retraso tras descarga" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" -"Tiempo de espera después de la descarga de filamento. Esto debería ayudar a " -"unos cambios de herramienta confiables con materiales flexibles que " -"necesitan más tiempo para encogerse a las dimensiones originales." +"Tiempo de espera después de la descarga de filamento. Esto debería resultar " +"en cambios de cabezal más seguros con materiales flexibles que necesitan más " +"tiempo para recuperar sus dimensiones originales." msgid "Number of cooling moves" msgstr "Cantidad de movimientos de refrigeración" @@ -11134,12 +13274,34 @@ msgstr "" "El filamento se enfría moviéndose hacía atrás y hacía delante en los tubos " "de refrigeración. Especifique la cantidad de movimientos." +msgid "Stamping loading speed" +msgstr "Velocidad de carga de \"Stamping\"" + +msgid "Speed used for stamping." +msgstr "Velocidad utilizada para \"Stamping\"." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" +"Distancia de \"Stamping\", medida desde del punto central del tubo de " +"refrigeración a la punta del extrusor." + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Si se establece en un valor distinto de cero, el filamento se mueve hacia la " +"boquilla entre los movimientos de enfriamiento individuales (\"Stamping\"). " +"Esta opción configura la distancia mínima de este movimiento antes de que el " +"filamento se retraiga de nuevo." + msgid "Speed of the first cooling move" msgstr "Velocidad del primer movimiento de refrigeración" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" -"Los movimiento de refrigeración van acelerando gradualmente a esta velocidad." +"Los movimiento de refrigeración van acelerando gradualmente partiendo desde " +"esta velocidad." msgid "Minimal purge on wipe tower" msgstr "Purga mínima en la torre de purga" @@ -11151,10 +13313,10 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Tras un cambio de herramienta, es posible que no se conozca la posición " -"exacta del filamento recién cargado dentro de la boquilla y que la presión " -"del filamento aún no sea estable. Antes de purgar el cabezal de impresión en " -"un relleno o un objeto de sacrificio, Snapmaker Orca siempre cebará esta " +"Tras un cambio de cabezal, es posible que no se conozca la posición exacta " +"del filamento recién cargado dentro de la boquilla y que la presión del " +"filamento aún no sea estable. Antes de purgar el cabezal de impresión en un " +"relleno o en un objeto de sacrificio, Snapmaker Orca siempre cebará esta " "cantidad de material en la torre de purga para producir sucesivas " "extrusiones de relleno u objetos de sacrificio de forma fiable." @@ -11163,18 +13325,8 @@ msgstr "La velocidad del último movimiento de refrigeración" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" -"Los movimientos de refrigeración se aceleran gradualmente hacía esta " -"velocidad." - -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tiempo que tarda el firmware de la impresora (o la Unidad Multi Material " -"2.0) en cargar un nuevo filamento durante un cambio de herramienta (al " -"ejecutar el T-Code). El estimador de tiempo del G-Code añade este tiempo al " -"tiempo total de impresión." +"Los movimientos de refrigeración se aceleran gradualmente hasta alcanzar " +"esta velocidad." msgid "Ramming parameters" msgstr "Parámetros de moldeado de extremo" @@ -11183,45 +13335,35 @@ msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" -"El Moldeado de ExtremoDialog edita esta cadena y contiene los parámetros " -"específicos de moldeado de extremo." +"Esta cadena es editada por RammingDialog y contiene parámetros específicos " +"de moldeado de extremo." + +msgid "Enable ramming for multi-tool setups" +msgstr "Activar moldeado de extremo para configuraciones multicabezal" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tiempo que tarda el firmware (para la unidad Multi Material 2.0) en " -"descargar el filamento durante el cambio de herramienta ( cuando se ejecuta " -"el T-Code). Esta duración se añade a la duración total de impresión estimada " -"del G-Code." - -msgid "Enable ramming for multitool setups" -msgstr "Activar moldeado de extremo para configuraciones multiherramienta" - -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Llevar a cabo el moldeado de extremo cuando se usa una impresora multi " -"herramienta (es decir, cuando el 'Extrusor Único Multimaterial' en los " -"Ajustes de Impresora está desmarcado). Cuando está marcado, una pequeña " -"cantidad de filamento es extruida rápidamente en la torre de purga, justo " -"antes del cambio de herramienta. Esta opción se usa solamente cuando la " -"torre de purga está activada." +"cabezal (es decir, cuando el 'Extrusor Único Multimaterial' en los Ajustes " +"de Impresora está desmarcado). Cuando está marcado, una pequeña cantidad de " +"filamento es extruida rápidamente en la torre de purga, justo antes del " +"cambio de cabezal. Esta opción se usa solamente cuando la torre de purga " +"está activada." -msgid "Multitool ramming volume" -msgstr "Volumen de Moldeado de Extremo multiherramienta" +msgid "Multi-tool ramming volume" +msgstr "Volumen de Moldeado de Extremo Multicabezal" -msgid "The volume to be rammed before the toolchange." -msgstr "El volumen de Moldeado de Extremo antes del cambio de herramienta." +msgid "The volume to be rammed before the tool change." +msgstr "El volumen de Moldeado de Extremo antes del cambio de cabezal." -msgid "Multitool ramming flow" -msgstr "Flujo de Moldeado de Extremo multiherramienta" +msgid "Multi-tool ramming flow" +msgstr "Flujo de Moldeado de Extremo multicabezal" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" "Flujo usado por el Moldeado de Extremo de filamento antes del cambio de " "cabezal." @@ -11229,40 +13371,51 @@ msgstr "" msgid "Density" msgstr "Densidad" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Densidad del filamento. Sólo para las estadísticas" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "El tipo de material del filamento" msgid "Soluble material" msgstr "Material soluble" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" +"El material soluble se utiliza habitualmente para imprimir soportes y la " +"interfaz de los soportes" + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." msgstr "" -"El material soluble se utiliza habitualmente para imprimir el soporte y la " -"interfaz de soporte" msgid "Support material" msgstr "Material de soporte" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"El material de soporte se utiliza habitualmente para imprimir soportes y la " +"interfaz de los soportes" + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" -"El material de soporte se utiliza habitualmente para imprimir el soporte e " -"interfaces de soporte" msgid "Softening temperature" msgstr "Temperatura de ablandado" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "El material se reblandece a esta temperatura, por lo que cuando la " "temperatura de la cama es igual o superior a ella, es muy recomendable abrir " @@ -11271,16 +13424,16 @@ msgstr "" msgid "Price" msgstr "Precio" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Precio del filamento. Sólo para las estadísticas" msgid "money/kg" -msgstr "dinero/kg" +msgstr "moneda/kg" msgid "Vendor" msgstr "Fabricante" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Fabricante del filamento. Para mostrar solamente" msgid "(Undefined)" @@ -11291,7 +13444,7 @@ msgstr "Dirección de relleno de baja densidad" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Ángulo para el patrón de relleno de baja densidad, que controla el inicio o " "la dirección principal de la línea" @@ -11301,58 +13454,81 @@ msgstr "Dirección del relleno sólido" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Ángulo para el patrón de relleno sólido, que controla el inicio o la " "dirección principal de la línea" -msgid "Rotate solid infill direction" -msgstr "Cambiar la dirección del relleno sólido" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Cambiar 90° la dirección del relleno sólido para cada capa." - msgid "Sparse infill density" msgstr "Densidad de relleno de baja densidad" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" "Densidad del relleno de baja densidad interno, el 100% convierte el relleno " "de baja densidad en relleno sólido y se utilizará el patrón de relleno " "sólido interno" +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" + msgid "Sparse infill pattern" msgstr "Patrón de relleno de baja densidad" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Patrón de líneas para el relleno interno de baja densidad" -msgid "Grid" -msgstr "Rejilla" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Lineal" -msgid "Cubic" -msgstr "Cúbico" +msgid "Grid" +msgstr "Rejilla" msgid "Tri-hexagon" msgstr "Tri-hexágono" -msgid "Gyroid" -msgstr "Giroide" - -msgid "Honeycomb" -msgstr "Panal de abeja" +msgid "Cubic" +msgstr "Cúbico" msgid "Adaptive Cubic" msgstr "Cúbico Adaptativo" -msgid "3D Honeycomb" -msgstr "Panal 3D" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "Soporte Cúbico" @@ -11360,9 +13536,53 @@ msgstr "Soporte Cúbico" msgid "Lightning" msgstr "Rayo" +msgid "Honeycomb" +msgstr "Panal de abeja" + +msgid "3D Honeycomb" +msgstr "Panal 3D" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "Rayado Cruzado" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Giroide" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "Longitud del anclaje de relleno de baja densidad" @@ -11374,7 +13594,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11386,19 +13606,18 @@ msgstr "" "de relleno se conecta a un segmento de perímetro en un solo lado y la de " "relleno se conecta a un segmento de perímetro en un solo lado y la longitud " "del ancho de segmento de perímetro escogido se limita a este parámetro, pero " -"no más largo que anclage_longitud_max. \n" -"Configure este parámetro a cero para deshabilitar los perímetros de anclaje " +"no más largo que anclaje_longitud_max.\n" "Configure este parámetro a cero para deshabilitar los perímetros de anclaje " "conectados a una sola línea de relleno." msgid "0 (no open anchors)" -msgstr "0 (no abrir anclajes)" +msgstr "0 (no anclar)" msgid "1000 (unlimited)" msgstr "1000 (ilimitada)" msgid "Maximum length of the infill anchor" -msgstr "Máxima longitud de relleno del anclaje" +msgstr "Máxima longitud del anclaje de relleno" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11408,7 +13627,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11416,35 +13635,35 @@ msgstr "" "un perímetro adicional. Si se expresa como porcentaje (por ejemplo: 15%) " "este se calcula sobre el ancho de relleno de extrusión. Snapmaker Orca intenta " "conectar dos líneas de relleno cercanas a un segmento de perímetro corto. Si " -"no hay ningún segmento más corto que este parámetro, esta líena de relleno " +"no hay ningún segmento más corto que este parámetro, esta línea de relleno " "se conecta a un segmento de perímetro solamente a un lado y la longitud del " "segmento de perìmetro escogida se limita a relleno_anclaje, pero no más alto " -"que este parámetro. \n" +"que este parámetro.\n" "Si se deja a 0, el algoritmo antiguo para conexión de relleno se usará, esto " "debería drear el mismo resultado que con 1000 y 0." msgid "0 (Simple connect)" msgstr "0 (Conexión simple)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Aceleración de los perímetros externos" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Aceleración de los perímetros internos" -msgid "Acceleration of travel moves" -msgstr "Aceleración de movimiento de viaje" +msgid "Acceleration of travel moves." +msgstr "Aceleración de los movimientos de desplazamiento" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Aceleración del relleno de la superficie superior. El uso de un valor más " "bajo puede mejorar la calidad de la superficie superior" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" -"Aceleración del perímetro externo. Usando un valor menor puede mejorar la " +"Aceleración del perímetro externo. Usar un valor menor puede mejorar la " "calidad" msgid "" @@ -11461,7 +13680,7 @@ msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Aceleración de relleno de baja densidad. Si el valor se expresa en " +"Aceleración del relleno de baja densidad. Si el valor se expresa en " "porcentaje (por ejemplo 100%), se calculará basándose en la aceleración por " "defecto." @@ -11470,21 +13689,21 @@ msgid "" "percentage (e.g. 100%), it will be calculated based on the default " "acceleration." msgstr "" -"Aceleración de relleno sólido interno. Si el valor se expresa como " +"Aceleración del relleno sólido interno. Si el valor se expresa como " "porcentaje (por ejemplo 100%), este se calculará basándose en la aceleración " "por defecto." msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Aceleración de la primera capa. El uso de un valor más bajo puede mejorar la " -"adherencia de la bandeja de impresión" +"adherencia con la bandeja de impresión" msgid "Enable accel_to_decel" msgstr "Activar acel_a_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "El max_accel_to_decel de Klipper será ajustado automáticamente" msgid "accel_to_decel" @@ -11492,58 +13711,69 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "El max_accel_to_decel de Klipper se ajustará a este %% de aceleración" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk de los perímetros externos" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk de los perímetros internos" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Jerk de la superficie superior" -msgid "Jerk for infill" -msgstr "Jerk de relleno" +msgid "Jerk for infill." +msgstr "Jerk del relleno" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Jerk de la primera capa" -msgid "Jerk for travel" -msgstr "Jerk de viaje" +msgid "Jerk for travel." +msgstr "Jerk de desplazamiento" msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Ancho de extrusión de la primera capa. Si se expresa como %, se calculará " -"sobre el diámetro de la boquilla." +"Ancho de línea de la primera capa. Si se expresa como %, se calculará en " +"base al diámetro de la boquilla." msgid "Initial layer height" msgstr "Altura de la primera capa" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Altura de la primera capa. Hacer que la altura de la primera capa sea " -"ligeramente gruesa puede mejorar la adherencia de la bandeja de impresión" +"ligeramente gruesa puede mejorar la adherencia con la bandeja de impresión" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Velocidad de la primera capa excepto la parte sólida de relleno" msgid "Initial layer infill" msgstr "Relleno de la primera capa" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Velocidad de la parte de relleno sólido de la primera capa" msgid "Initial layer travel speed" -msgstr "Velocidad de la primera capa" +msgstr "Velocidad de desplazamiento en la primera capa" -msgid "Travel speed of initial layer" -msgstr "Velocidad de viaje de primera capa" +msgid "Travel speed of initial layer." +msgstr "Velocidad de movimientos de desplazamiento en la primera capa" msgid "Number of slow layers" msgstr "Número de capas lentas" @@ -11553,13 +13783,13 @@ msgid "" "increased in a linear fashion over the specified number of layers." msgstr "" "Las primeras capas se imprimen más lentamente de lo normal. La velocidad se " -"incrementa gradualmente de una forma lineal sobre un número específico de " +"incrementa gradualmente de una forma lineal sobre el número específicado de " "capas." msgid "Initial layer nozzle temperature" msgstr "Temperatura de la boquilla de la primera capa" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" "Temperatura de la boquilla para imprimir la primera capa cuando se utiliza " "este filamento" @@ -11574,34 +13804,56 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"La velocidad de ventilador se incrementará linealmente de cero a " -"\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". " -"\"full_fan_speed_layer\" se ignorará si es menor que " +"La velocidad de ventilador se incrementará linealmente de cero desde la capa " +"\"close_fan_the_first_x_layers\" al máximo en la capa \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" se ignorará si es menor que " "\"close_fan_the_first_x_layers\", en cuyo caso el ventilador funcionará al " -"máximo permitido de capa \"close_fan_the_first_x_layers\" + 1." +"máximo permitido en la capa \"close_fan_the_first_x_layers\" + 1." msgid "layer" msgstr "Capa" msgid "Support interface fan speed" -msgstr "Velocidad de ventilador de interfaz de soporte" +msgstr "Velocidad de ventilador en la interfaz de los soportes" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"La velocidad de ventilador se fuerza durante todas interfaces de soporte, " -"será capaz de debilitar sus uniones con una velocidad de ventilador más alta." -"Solo puede ser sobreescrita deshabilitando disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"Se puede imprimir el perímetro de forma aleatoria, de modo que la superficie " -"tenga un aspecto rugoso. Este ajuste controla la posición difusa" +"Sacudir ligeramente el cabezal de forma aleatoria cuando se imprime el " +"perímetro externo, de modo que la superficie tenga un aspecto rugoso. Este " +"ajuste controla la posición difusa" msgid "Contour" msgstr "Contorno" @@ -11613,30 +13865,119 @@ msgid "All walls" msgstr "Todas los perímetros" msgid "Fuzzy skin thickness" -msgstr "Distancia del punto de piel difusa" +msgstr "Espesor de superficie rugosa" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"La anchura dentro de la cual se va a jitear. Se aconseja que esté por debajo " -"de la anchura de la línea del perímetro exterior" +"La anchura dentro de la cual se va a sacudir el cabezal. Se aconseja que " +"esté por debajo del ancho de línea del perímetro exterior" msgid "Fuzzy skin point distance" -msgstr "Distancia al punto de superficie irregular" +msgstr "Distancia entre puntos de superficie rugosa" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "La diatancia media entre los puntos aleatorios introducidos en cada segmento " "de línea" msgid "Apply fuzzy skin to first layer" -msgstr "Aplicar piel difusa a la primera capa" +msgstr "Aplicar superficie difusa en la primera capa" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Si se aplica piel difusa en la primera capa" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Aplicar o no superficie difusa en la primera capa" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Combinado" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "Clásico" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" msgid "Filter out tiny gaps" msgstr "Filtrar pequeños huecos" @@ -11644,28 +13985,32 @@ msgstr "Filtrar pequeños huecos" msgid "Layers and Perimeters" msgstr "Capas y Perímetros" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" -"Filtra los huecos menores que el umbral especificado. Este ajuste no " -"afectará a las capas superior/inferior" +"Filtra los huecos menores que el umbral especificado (en mm). Este ajuste " +"afecta los rellenos superior, inferior e interno, así como al relleno de " +"huecos entre perímetros cuando se usa el generador Clásico." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" -"Velocidad de relleno del hueco. El hueco suele tener una anchura de línea " -"irregular y debe imprimirse más lentamente" +"Velocidad de relleno de huecos. Un hueco suele tener un ancho de línea " +"irregular y debería imprimirse más lentamente" msgid "Precise Z height" -msgstr "Altura Z Precisa (Experimental)" +msgstr "Altura Z Precisa (beta)" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Habilite esta opción para obtener la altura Z precisa del objeto después del " -"corte. Obtendrá la altura precisa del objeto ajustando las alturas de las " +"Habilite esta opción para obtener una altura Z precisa del objeto después " +"del laminado. Esta altura precisa se obtiene ajustando las alturas de las " "últimas capas. Tenga en cuenta que se trata de un parámetro experimental." msgid "Arc fitting" @@ -11673,9 +14018,9 @@ msgstr "Activar movimientos en arco" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11684,39 +14029,41 @@ msgstr "" "Habilite esta opción para obtener un archivo de G-Code con los movimientos " "G2 y G3. La tolerancia de ajuste es la misma que la resolución.\n" "\n" -"Nota: Para máquinas klipper, se recomienda desactivar esta opción. Klipper " -"no se beneficia de los comandos de arco ya que estos son divididos de nuevo " -"en segmentos de línea por el firmware. El resultado es una reducción de la " -"calidad de la superficie, ya que los segmentos de línea son convertidos en " -"arcos por la cortadora y de nuevo en segmentos de línea por el firmware." +"Nota: Para impresoras con firmware Klipper, se recomienda desactivar esta " +"opción. Klipper no se beneficia de los comandos de arco ya que estos son " +"divididos de nuevo en segmentos de línea por el firmware. El resultado es " +"una reducción de la calidad de la superficie, ya que los segmentos de línea " +"son convertidos en arcos por el laminador y de nuevo en segmentos de línea " +"por el firmware." msgid "Add line number" msgstr "Añadir número de línea" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Active esta opción para añadir el número de línea (Nx) al principio de cada " -"línea de G-Code" +"línea de G-Code." msgid "Scan first layer" msgstr "Escanear la primera capa" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" -"Active esta opción para que la cámara de la impresora pueda comprobar la " -"calidad de la primera capa" +"Active esta opción para que la cámara de la impresora compruebe la calidad " +"de la primera capa" msgid "Nozzle type" msgstr "Tipo de boquilla" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "El material metálico de la boquilla. Esto determina la resistencia a la " -"abrasión de la boquilla, y qué tipo de filamento se puede imprimir" +"abrasión de la boquilla, y con qué tipos de filamento puede imprimir" msgid "Undefine" msgstr "Indefinido" @@ -11727,18 +14074,21 @@ msgstr "Acero endurecido" msgid "Stainless steel" msgstr "Acero inoxidable" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Latón" msgid "Nozzle HRC" -msgstr "HRC Boquilla" +msgstr "Dureza HRC de la boquilla" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " "slicing." msgstr "" -"La dureza de la boquilla. Cero significa no comprobará la dureza de la " -"boquilla durante el laminado." +"La dureza de la boquilla. Cero significa que no se comprobará la dureza de " +"la boquilla durante el laminado." msgid "HRC" msgstr "HRC" @@ -11746,7 +14096,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Estructura de la impresora" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Disposición física y componentes de un dispositivo de impresión" msgid "CoreXY" @@ -11766,8 +14116,8 @@ msgstr "Mejor posición de los objetos" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "" -"Mejor auto posicionamiento de los objetos en el intervalo [0,1] con respecto " -"a la forma de la cama." +"Mejor auto posicionamiento de los objetos en el rango [0,1] con respecto a " +"la forma de la cama." msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " @@ -11781,19 +14131,19 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"Inicia el ventilador un número de segundos antes que el tiempo de inicio " -"objetivo (puede usar segundos fraccionales). Se asume aceleración infinita " -"para esta estimación de tiempo, y solo se tendrán en cuenta los movimientos " -"G1 y G0 (no soporta el ajuste de arco).\n" +"Arranca el ventilador este número de segundos antes que su tiempo de " +"arranque objetivo (se pueden usar fracciones de segundo). Se asume una " +"aceleración infinita para esta estimación de tiempo, y solo se tendrán en " +"cuenta los movimientos G1 y G0 (no compatible con ajuste de arco).\n" "Esto no moverá comandos de ventilador desde G-Codes personalizados (estos " "actúan como un tipo de 'barrera').\n" -"Esto no moverá comandos de ventilador en el G-Code inicial si el 'único G-" +"Esto no moverá comandos de ventilador en el G-Code inicial si 'usar sólo G-" "Code inicial personalizado' está activado\n" "Usar 0 para desactivar." @@ -11801,8 +14151,7 @@ msgid "Only overhangs" msgstr "Solo voladizos" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "" -"Solo se tomará dentro de la cuenta el retraso para enfriar los voladizos." +msgstr "Solo se tomará en la cuenta el retraso para enfriar los voladizos." msgid "Fan kick-start time" msgstr "Tiempo de arranque de ventilador" @@ -11823,16 +14172,16 @@ msgstr "" "Ajústelo a 0 para desactivarlo." msgid "Time cost" -msgstr "Coste dinerario por hora" +msgstr "Coste monetario por hora" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "El coste por hora de la impresora" msgid "money/h" msgstr "dinero/hora" msgid "Support control chamber temperature" -msgstr "Soporte de control de temperatura de cámara" +msgstr "Función de control de temperatura de cámara" msgid "" "This option is enabled if machine support controlling chamber temperature\n" @@ -11842,7 +14191,7 @@ msgstr "" "la cámara" msgid "Support air filtration" -msgstr "Soportar filtración de aire" +msgstr "Función de filtración de aire" msgid "" "Enable this if printer support air filtration\n" @@ -11854,45 +14203,46 @@ msgstr "" msgid "G-code flavor" msgstr "Tipo de G-Code" -msgid "What kind of gcode the printer is compatible with" -msgstr "Con qué tipo de G-Code es compatible la impresora" +msgid "What kind of G-code the printer is compatible with." +msgstr "Con qué tipo de G-Code es compatible la impresora." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "Impresora Pellet Modificada" +msgstr "Impresora Modificada para Pellets" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" "Active esta opción si su impresora utiliza pellets en lugar de filamentos" msgid "Support multi bed types" -msgstr "Admite varios tipos de cama" +msgstr "Usar tipos de cama múltiples" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "Active esta opción si desea utilizar varios tipos de cama" msgid "Label objects" msgstr "Etiquetar objetos" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" "Habilite esta opción para añadir comentarios en el G-Code etiquetando los " "movimientos de impresión con el objeto al que pertenecen, lo cual es útil " -"para el plugin Octoprint CancelObject. Esta configuración NO es compatible " +"para el plugin CancelObject deOctoprint. Esta configuración NO es compatible " "con la configuración de Extrusor Único Multi Material y Limpiar en Objeto / " "Limpiar en Relleno." msgid "Exclude objects" msgstr "Excluir objetos" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "Activar esta opción para añadir el comando EXCLUDE OBJECT en el G-Code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "" +"Activar esta opción para añadir el comando EXCLUDE OBJECT en el G-Code." msgid "Verbose G-code" msgstr "G-Code detallado" @@ -11902,9 +14252,9 @@ msgid "" "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" -"Activar esto para escoger un archivo de G-Code comentado, con cada línea " -"explicado por un texto descriptivo. Si imprime desde la tarjeta SD, el peso " -"adicional del archivo podría hacer que tu firmware se ralentice." +"Activar esta opción para generar archivos de G-Code comentados, con cada " +"línea explicada por un texto descriptivo. Si se imprime desde la tarjeta SD, " +"el tamaño adicional del archivo podría hacer que el firmware se ralentice." msgid "Infill combination" msgstr "Combinación de relleno" @@ -11913,9 +14263,143 @@ msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"Combine automáticamente el relleno de baja densidad de varias capas para " -"imprimirlas juntas y reducir el tiempo. La perímetro se sigue imprimiendo " -"con la altura original de la capa." +"Combinar automáticamente el relleno de baja densidad de varias capas para " +"imprimirlas juntas y reducir el tiempo de impresión. El perímetro externo se " +"sigue imprimiendo con la altura de capa original." + +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Combinación de relleno - Altura máxima de la capa" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Altura máxima de capa para el relleno de baja densidad combinado.\n" +"\n" +"Ajústelo a 0 o 100% para utilizar el diámetro de la boquilla (para reducir " +"al máximo el tiempo de impresión) o un valor de ~80% para maximizar la " +"fuerza del relleno relleno de baja densidad.\n" +"\n" +"El número de capas sobre las que se combina el relleno se obtiene dividiendo " +"este valor por la altura de la capa y redondeándolo al decimal más cercano.\n" +"\n" +"Utilice valores absolutos en mm (p. ej., 0,32 mm para una boquilla de 0,4 " +"mm) o valores en % (p. ej., 80%). Este valor no debe ser mayor que el " +"diámetro de la boquilla." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" msgid "Filament to print internal sparse infill." msgstr "Filamento para imprimir el relleno interno de baja densidad." @@ -11924,11 +14408,11 @@ msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Ancho de extrusión de la densidad de relleno interna. Si se expresa como %, " -"se calculará sobre el diámetro de la boquilla." +"Ancho de línea del relleno interno interno de baja densidad. Si se expresa " +"como un %, se calculará en base al diámetro de la boquilla." msgid "Infill/Wall overlap" -msgstr "Superposición de relleno/perímetros" +msgstr "Solape de relleno/perímetro" #, no-c-format, no-boost-format msgid "" @@ -11938,58 +14422,70 @@ msgid "" "material resulting in rough top surfaces." msgstr "" "El área de relleno se amplía ligeramente para solaparse con el perímetro y " -"mejorar la adherencia. El valor porcentual es relativo a la anchura de línea " -"del de baja densidad. Ajuste este valor a ~10-15% para minimizar la " -"sobreextrusión potencial y la acumulación de material que resulta en " -"superficies superiores ásperas." +"mejorar la adherencia. El valor porcentual es relativo al ancho de línea del " +"relleno de baja densidad. Ajuste este valor a ~10-15% para minimizar una " +"potencial sobreextrusión y/o una acumulación de material que resulte en " +"artefactos en las superficies superiores." msgid "Top/Bottom solid infill/wall overlap" -msgstr "Relleno sólido superior/inferior/solapamiento de perímetros" +msgstr "Solape de relleno sólido superior/inferior y perímetro" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -"El área de relleno sólido de cubierta superior se amplía ligeramente para " -"solaparse con el perímetro y mejorar la adherencia y minimizar la aparición " -"de agujeros de alfiler donde el relleno de cubierta superior se une a las " -"perímetros. Un valor del 25-30% es un buen punto de partida para minimizar " -"la aparición de agujeros. El valor porcentual es relativo a la anchura de la " -"línea de relleno de baja densidad" +"El área de relleno sólido de cubierta superior/inferior se amplía " +"ligeramente para solaparse con el perímetro, mejorando la adherencia y " +"minimizando la aparición de agujeros cuando el relleno de cubierta superior/" +"inferior se une a los perímetros. Un valor alrededor de 25-30% es un buen " +"punto de partida para minimizar la aparición de agujeros. El valor " +"porcentual es relativo al ancho de línea del relleno de baja densidad." -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Velocidad del relleno interno de baja densidad" +msgid "Inherits profile" +msgstr "Hereda el perfil" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" msgstr "Perímetros de interfaz" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Fuerza la generación de perímetro sólidos entre materiales/volúmenes " +"Furzar la generación de perímetro sólidos entre materiales/volúmenes " "adyacentes. Útil para impresiones con varios extrusores, con materiales " -"translúcidos o material de soporte soluble manualmente" +"translúcidos o material soluble de soportes manuales." msgid "Maximum width of a segmented region" msgstr "Máximo ancho de una región segmentada" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Máximo ancho de una región segmentada. Cero desactiva está característica." +"Ancho máximo de una región segmentada. Cero desactiva está característica." msgid "Interlocking depth of a segmented region" msgstr "Profundidad de entrelazado de una región segmentada" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Profundidad de entrelazado de una región segmentada. Cero desactiva esta " -"característica." +"Profundidad de enlazado de una región segmentada. Se ignorará si " +"\"mmu_segmented_region_max_width\" es cero o si " +"\"mmu_segmented_region_interlocking_depth \"es mayor que " +"\"mmu_segmented_region_max_width\". El valor cero desactiva esta función." msgid "Use beam interlocking" msgstr "Usar entrelazado de vigas" @@ -12001,19 +14497,19 @@ msgid "" msgstr "" "Genera una estructura de vigas de entrelazado en los lugares donde se tocan " "los distintos filamentos. Esto mejora la adherencia entre filamentos, " -"especialmente en modelos impresos en distintos materiales." +"especialmente en modelos impresos con múltiples materiales." msgid "Interlocking beam width" msgstr "Ancho de viga de entrelazado" msgid "The width of the interlocking structure beams." -msgstr "El ancho de estructura de vigas de entrelazado." +msgstr "El ancho de las vigas de la estructura de entrelazado." msgid "Interlocking direction" msgstr "Dirección de entrelazado" msgid "Orientation of interlock beams." -msgstr "Orientación de vigas entrelazadas." +msgstr "Orientación de vigas de entrelazado." msgid "Interlocking beam layers" msgstr "Capas de vigas de entrelazado" @@ -12032,7 +14528,7 @@ msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" -"La distancia desde el límite entre filamentos para generar estructura " +"La distancia desde la frontera entre filamentos para generar la estructura " "entrelazada, medida en celdas. Un número demasiado bajo de celdas dará lugar " "a una adhesión deficiente." @@ -12053,18 +14549,18 @@ msgid "" "Ironing is using small flow to print on same height of surface again to make " "flat surface more smooth. This setting controls which layer being ironed" msgstr "" -"El alisado es el uso de un pequeño flujo para imprimir en la misma altura de " -"la superficie de nuevo para hacer la superficie plana más suave. Este ajuste " -"controla la capa que se alisa" +"El alisado es el uso de un flujo muy bajo para realizar una segunda pasada " +"de impresión a la misma altura de una superficie superior para obtener un " +"acabado más liso. Este ajuste controla la capa que se alisa." msgid "No ironing" msgstr "Sin alisado" msgid "Top surfaces" -msgstr "Superficies superiores" +msgstr "Todas las superficies superiores" msgid "Topmost surface" -msgstr "Superficie superior" +msgstr "Sólo la superficie superior" msgid "All solid layer" msgstr "Todas la capas sólidas" @@ -12072,55 +14568,68 @@ msgstr "Todas la capas sólidas" msgid "Ironing Pattern" msgstr "Patrón de Alisado" -msgid "The pattern that will be used when ironing" -msgstr "Patrón que se usará al alisar" +msgid "The pattern that will be used when ironing." +msgstr "Patrón que se usará duante el alisado" msgid "Ironing flow" msgstr "Flujo de alisado" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "La cantidad de material a extruir durante el alisado. Relativo al flujo de " "la altura de la capa normal. Un valor demasiado alto provoca una " "sobreextrusión en la superficie" msgid "Ironing line spacing" -msgstr "Espacio entre líneas de alisado" +msgstr "Espaciado entre líneas de alisado" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "La distancia entre las líneas de alisado" +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "Velocidad de alisado" -msgid "Print speed of ironing lines" -msgstr "Velocidad de impresión de las líneas de alisado" +msgid "Print speed of ironing lines." +msgstr "Velocidad de impresión de las líneas de alisado." -msgid "Ironing angle" -msgstr "Ángulo de alisado" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"El planchado en ángulo se realiza en. Un número negativo desactiva esta " -"función y utiliza el método por defecto." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "" +"Esta parte de G-Code se inserta en cada cambio de capa después de levantar z." + +msgid "Clumping detection G-code" msgstr "" -"Esta parte de G-Code se inserta en cada cambio de capa después de levantar z" msgid "Supports silent mode" msgstr "Admite el modo silencioso" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" -"Si la máquina admite el modo silencioso en el que la máquina utiliza una " -"menor aceleración para imprimir" +"Si la máquina admite el modo silencioso en el que la se utiliza una menor " +"aceleración para imprimir" msgid "Emit limits to G-code" msgstr "Emitir límites al G-Code" @@ -12130,27 +14639,27 @@ msgstr "Límites de la máquina" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" -"Si está activada, los límites de la máquina se emitirán en un archivo G-" -"Code. \n" +"Si está activada, los límites de la máquina se emitirán en el archivo G-" +"Code.\n" "Esta opción se ignorará si el tipo de G-Code es Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Este G-Code se usará como código para la pausa de impresión. El usuario " -"puede insertar una pausa en el visor de G-Code" +"puede insertar un comando de pausa de G-Code en el visor de G-Code." -msgid "This G-code will be used as a custom code" -msgstr "Este G-Code se usará para el código personalizado" +msgid "This G-code will be used as a custom code." +msgstr "Este G-Code se usará como un código personalizado" msgid "Small area flow compensation (beta)" msgstr "Compensación de flujo en áreas pequeñas (beta)" -msgid "Enable flow compensation for small infill areas" -msgstr "Permitir la compensación de flujo en zonas con poco relleno" +msgid "Enable flow compensation for small infill areas." +msgstr "Activar la compensación de flujo en zonas de relleno pequeñas" msgid "Flow Compensation Model" msgstr "Modelo de compensación de flujo" @@ -12158,49 +14667,45 @@ msgstr "Modelo de compensación de flujo" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Modelo de compensación del flujo, utilizado para ajustar el flujo en zonas " -"de relleno pequeñas. El modelo se expresa como un par de valores separados " -"por comas para la longitud de extrusión y los factores de corrección del " -"flujo, uno por línea, en el siguiente formato: \"1.234,5.678\"" msgid "Maximum speed X" -msgstr "Velocidad máxima X" +msgstr "Velocidad máxima en X" msgid "Maximum speed Y" -msgstr "Velocidad máxima Y" +msgstr "Velocidad máxima en Y" msgid "Maximum speed Z" -msgstr "Velocidad máxima Z" +msgstr "Velocidad máxima en Z" msgid "Maximum speed E" -msgstr "Velocidad máxima E" +msgstr "Velocidad máxima en E" msgid "Maximum X speed" -msgstr "Velocidad máxima X" +msgstr "Velocidad máxima en X" msgid "Maximum Y speed" msgstr "Velocidad máxima en Y" msgid "Maximum Z speed" -msgstr "Velocidad máxima de Z" +msgstr "Velocidad máxima en Z" msgid "Maximum E speed" -msgstr "Velocidad máxima E" +msgstr "Velocidad máxima en E" msgid "Maximum acceleration X" -msgstr "Máxima aceleración X" +msgstr "Aceleración máxima en X" msgid "Maximum acceleration Y" -msgstr "Máxima aceleración Y" +msgstr "Aceleración máxima en Y" msgid "Maximum acceleration Z" -msgstr "Máxima aceleración Z" +msgstr "Aceleración máxima en Z" msgid "Maximum acceleration E" -msgstr "Máxima aceleración E" +msgstr "Aceleración máxima en E" msgid "Maximum acceleration of the X axis" msgstr "Máxima aceleración en el eje X" @@ -12215,19 +14720,19 @@ msgid "Maximum acceleration of the E axis" msgstr "Máxima aceleración en el eje E" msgid "Maximum jerk X" -msgstr "Máximo jerk X" +msgstr "Máximo jerk en X" msgid "Maximum jerk Y" -msgstr "Máximo jerk Y" +msgstr "Máximo jerk en Y" msgid "Maximum jerk Z" -msgstr "Máximo jerk Z" +msgstr "Máximo jerk en Z" msgid "Maximum jerk E" -msgstr "Máximo jerk E" +msgstr "Máximo jerk en E" msgid "Maximum jerk of the X axis" -msgstr "Maximo jerk del eje Y" +msgstr "Maximo jerk del eje X" msgid "Maximum jerk of the Y axis" msgstr "Maximo jerk del eje Y" @@ -12236,7 +14741,16 @@ msgid "Maximum jerk of the Z axis" msgstr "Maximo jerk del eje Z" msgid "Maximum jerk of the E axis" -msgstr "Maximo jerk del eje E" +msgstr "Maximo jerk del eje E (extrusor)" + +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" msgstr "Velocidad mínima de extrusión" @@ -12265,28 +14779,44 @@ msgstr "Aceleración máxima de retracción (M204 R)" msgid "Maximum acceleration for travel" msgstr "Aceleración máxima para el desplazamiento" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" "Aceleración máxima para el desplazamiento (M204 T), sólo se aplica en Marlin " "2" -msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"La velocidad del ventilador de refrigeración de la pieza puede aumentarse " -"cuando la refrigeración automática está activada. Esta es la limitación de " -"velocidad máxima del ventilador de refrigeración parcial" msgid "Max" msgstr "Max" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"La velocidad del ventilador de refrigeración de pieza puede aumentarse " +"cuando la refrigeración automática está activada. Esta es la limitación de " +"velocidad máxima del ventilador de refrigeración de pieza." + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"La mayor altura de capa imprimible para el extrusor. Se utiliza para limitar " -"la altura máxima de la capa cuando se habilita la altura de capa adaptativa" msgid "Extrusion rate smoothing" msgstr "Suavizado de la tasa de extrusión" @@ -12297,23 +14827,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12324,58 +14854,56 @@ msgstr "" "(alta velocidad/ancho mayor) a una extrusión de menor flujo (menor velocidad/" "ancho menor) y viceversa.\n" "\n" -"Define la velocidad máxima a la que el flujo volumétrico extruido en mm3/seg " +"Define la velocidad máxima a la que el flujo volumétrico extruido en mm³/s " "puede cambiar con el tiempo. Valores más altos significan que se permiten " "cambios de velocidad de extrusión más altos, lo que resulta en transiciones " "de velocidad más rápidas.\n" "\n" -"Un valor de 0 desactiva la función. \n" +"Un valor de 0 desactiva la función.\n" "\n" "Para una impresora de accionamiento directo de alta velocidad y alto flujo " "(como la Bambu lab o la Voron) este valor no suele ser necesario. Sin " "embargo, puede proporcionar algún beneficio marginal en ciertos casos en los " "que las velocidades de las características varían mucho. Por ejemplo, cuando " "hay ralentizaciones agresivas debidas a voladizos. En estos casos, se " -"recomienda un valor alto de alrededor de 300-350 mm3/s2, ya que esto permite " +"recomienda un valor alto de alrededor de 300-350 mm³/s², ya que esto permite " "el suavizado suficiente para ayudar al avance de presión a lograr una " "transición de flujo más suave.\n" "\n" "Para impresoras más lentas sin avance de presión, el valor debe fijarse " -"mucho más bajo. Un valor de 10-15mm3/s2 es un buen punto de partida para " -"extrusoras de accionamiento directo y de 5-10mm3/s2 para las de estilo " -"Bowden. \n" +"mucho más bajo. Un valor de 10-15 mm³/s² es un buen punto de partida para " +"extrusoras de accionamiento directo y de 5-10 mm³/s² para las de estilo " +"Bowden.\n" "\n" "Esta característica es conocida como Pressure Equalizer en Prusa slicer.\n" "\n" "Nota: este parámetro desactiva el ajuste de arco." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "Longitud del segmento de suavizado" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Un valor más bajo resulta en transiciones de velocidad de extrusión más " -"suaves. Sin embargo, esto resulta en un archivo G-Code significativamente " -"más grande y más instrucciones para que la impresora procese. \n" -"\n" -"El valor por defecto de 3 funciona bien en la mayoría de los casos. Si su " -"impresora está tartamudeando, aumente este valor para reducir el número de " -"ajustes realizados.\n" -"\n" -"Valores permitidos: 1-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "Velocidad mínima del ventilador de refrigeración de la pieza" msgid "" @@ -12391,32 +14919,21 @@ msgstr "" "Por favor, active auxiliary_fan en la configuración de la impresora para " "utilizar esta función. Comando G-Code: M106 P2 S(0-255)" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"La menor altura de capa imprimible para el extrusor. Se utiliza para limitar " -"la altura mínima de la capa cuando se activa la altura de capa adaptable" msgid "Min print speed" msgstr "Velocidad de impresión mínima" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"La velocidad mínima de impresión a la que la impresora reducirá la velocidad " -"para intentar mantener el tiempo mínimo de capa anterior, cuando la " -"ralentización para un mejor ventilación de la capa está activada." -msgid "Nozzle diameter" -msgstr "Diámetro de boquilla" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diámetro de boquilla" msgid "Configuration notes" @@ -12427,7 +14944,7 @@ msgid "" "header comments." msgstr "" "Puede añadir sus notas personales aquí. Este texto será añadido a los " -"comentarios de G-Code de cabecera." +"comentarios de cabcera del archivo de G-Code." msgid "Host Type" msgstr "Tipo de host" @@ -12437,12 +14954,12 @@ msgid "" "contain the kind of the host." msgstr "" "Snapmaker Orca puede cargar archivos G-Code a un host de impresora. Este campo " -"puede contener el tipo de host." +"debe contener el tipo de host." msgid "Nozzle volume" msgstr "Volumen de la boquilla" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Volumen de la boquilla entre el cortador y el extremo de la boquilla" msgid "Cooling tube position" @@ -12458,21 +14975,22 @@ msgstr "Longitud del tubo de refrigeración" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" -"Longitud del tubo de refrigeración para limitar el espacio de refrigeración " -"de los movimientos en su interior." +"Longitud del tubo de refrigeración para limitar el espacio para los " +"movimientos de refrigeración en su interior." msgid "High extruder current on filament swap" -msgstr "Aumentar el flujo de extrusión en el cambio de filamento" +msgstr "" +"Aumentar la corriente del motor de extrusión durante el cambio de filamento" msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Puede ser beneficioso para incrementar el flujo de extrusión durante la " -"secuencia de intercambio de filamento, para permitir ratios rápidos de " -"moldeado de extremos y superar resistencias durante la carga de filamentos " -"con puntas deformadas." +"Puede ser beneficioso incrementar la corriente del motor de extrusión " +"durante el proceso de cambio de filamento, para permitir velocidades altas " +"de cebado durante el moldeado de extremo y superar la resistencia de carga " +"de filamentos con puntas deformadas." msgid "Filament parking position" msgstr "Posición de parada de filamento" @@ -12481,9 +14999,9 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Distancia de la punta del extrusor desde la posición donde el filamento se " -"detiene cuando se descarga. Debería coincidir con el valor del firmware de " -"la impresora." +"Distancia entre la punta del extrusor y la posición donde el filamento se " +"\"estaciona\" cuando se descarga. Debe coincidir con el valor en el firmware " +"de la impresora." msgid "Extra loading distance" msgstr "Distancia extra de carga" @@ -12491,17 +15009,17 @@ msgstr "Distancia extra de carga" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Cuando se ajusta a cero, la distancia que el filamento se mueve desde la " -"posición de estacionamiento durante la carga es exactamente la misma que se " -"movió hacia atrás durante la descarga. Cuando es positivo, se carga más " -"lejos, si es negativo, el movimiento de carga es más corto que el de " +"posición de \"estacionamiento\" durante la carga es exactamente la misma que " +"se retrajo durante la descarga. Cuando es positivo, el movimiento de carga " +"es mayor. Si es negativo, el movimiento de carga es más corto que el de " "descarga." msgid "Start end points" -msgstr "Puntos de inicio fin" +msgstr "Puntos de inicio y fin" msgid "The start and end points which is from cutter area to garbage can." msgstr "Los puntos de inicio y fin, desde la zona de corte al cubo de basura." @@ -12512,99 +15030,110 @@ msgstr "Reducir la retracción del relleno" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" -"No retrae cuando el viaje está totalmente en el área de relleno. Eso " -"significa que el rezume no se pueda ver. Puede reducir los tiempos de " -"retracción para modelos complejos y ahorrar tiempo de impresión, pero hacer " -"que el corte y la generación de G-Code sea más lento" +"Desactiva la retracción cuando el desplazamiento se realiza en su totalidad " +"dentro de un área de relleno, donde los artefactos causados por un rezumado " +"no son visibles. Puede reducir el número de retracciones y por ende el " +"tiempo total de retracción al imprimir modelos complejos, reduciendo el " +"tiempo total de impresión. Sin embargo, puede que las operaciones de " +"laminado y de generación del archivo G-Code sean más lentas." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Esta opción reducirá la temperatura de los extrusores inactivos para evitar " +"el rezumado." msgid "Filename format" -msgstr "Formato de los archivos" +msgstr "Formato de los nombres de archivo" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" -"El usuario puede definir por sí mismo el nombre del archivo del proyecto al " -"exportarlo" +"El usuario puede definir un nombre de archivo personalizado al exportar el " +"proyecto" msgid "Make overhangs printable" -msgstr "Voladizos imprimibles sin soporte" +msgstr "Imprimir voladizos sin soportes" msgid "Modify the geometry to print overhangs without support material." msgstr "Modificar la geometría para imprimir voladizos sin soportes." msgid "Make overhangs printable - Maximum angle" -msgstr "Máximo ángulo de impresión de voladizos imprimibles sin soporte" +msgstr "Imprimir voladizos sin soportes - Ángulo máximo" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"Máximo ángulo de voladizos para permitir voladizos más pronunciados. 90º no " -"cambiará el modelo del todo y permitirá cualquier voladizo, mientras que 0 " -"reemplazará todos lo voladizos con material cónico." +"Máximo ángulo permitido de voladizo tras modificar los voladizos con mayor " +"pendiente para imprimir sin soportes. 90° no modificará ningún voladizo del " +"modelo, manteniendo todos los voladizo. 0° reemplazará todos los voladizos " +"con material cónico." msgid "Make overhangs printable - Hole area" -msgstr "Área hueca del voladizo imprimible sin soporte" +msgstr "Imprimir voladizos sin soportes - Área de orificios" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -"Máxima área hueca en la base del modelo antes de que se lleno por material " -"cónico. El valor 0 llenará todos los huecos en la base del modelo." - -msgid "mm²" -msgstr "mm²" +"Máxima área de un orificio en la base del modelo antes de que se rellene de " +"material cónico. El valor 0 llenará todos los orificios en la base del " +"modelo." msgid "Detect overhang wall" -msgstr "Detectar el voladizo del perímetro" +msgstr "Detectar perímetros en voladizo" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Detecta el porcentaje de voladizo en relación con el ancho de la línea y " +"Detecta el porcentaje de voladizo en relación con el ancho de línea y " "utiliza diferentes velocidades para imprimir. Para el 100%% de voladizo, se " "utiliza la velocidad de puente." +msgid "Filament to print walls." +msgstr "Filamento usado para imprimir perímetros" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" "Ancho de extrusión del perímetro interno. Si se expresa cómo %, se calculará " -"sobre el diámetro de la boquilla." +"en base al diámetro de la boquilla." -msgid "Speed of inner wall" -msgstr "Velocidad del perímetro interior" +msgid "Speed of inner wall." +msgstr "Velocidad del perímetro interno" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Número de perímetros de cada capa" msgid "Alternate extra wall" -msgstr "Perímetro adicional alternativo" +msgstr "Perímetro adicional alternado" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" -"Este ajuste añade una perímetro adicional a cada dos capas. De este modo, el " -"relleno queda encajado verticalmente entre los perímetros, lo que da como " -"resultado impresiones más resistentes.\n" +"Este ajuste alterna el añadir un perímetro adicional cada dos capas. De este " +"modo, el relleno queda encajado verticalmente entre los perímetros, lo que " +"da como resultado impresiones más resistentes.\n" "\n" "Cuando esta opción está activada, es necesario desactivar la opción de " "asegurar el grosor del perímetro vertical.\n" "\n" "No se recomienda utilizar el relleno rayo junto con esta opción, ya que el " -"relleno es limitado para anclar los perímetros adicionales." +"hay una cantidad limitada de relleno donde anclar los perímetros adicionales." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -12614,87 +15143,98 @@ msgid "" "environment variables." msgstr "" "Si desea procesar el G-Code de salida a través de scripts personalizados, " -"simplemente enumere sus rutas absolutas aquí. Separe varios scripts con " +"simplemente enumere sus rutas absolutas aquí. Separe diferentes scripts con " "punto y coma. A los scripts se les pasará la ruta absoluta al archivo G-Code " "como primer argumento, y pueden acceder a los ajustes de configuración de " "Snapmaker Orca leyendo variables de entorno." +msgid "Printer type" +msgstr "Tipo de impresora" + +msgid "Type of the printer." +msgstr "El tipo de impresora" + msgid "Printer notes" msgstr "Anotaciones de la impresora" msgid "You can put your notes regarding the printer here." msgstr "Puede colocar sus notas acerca de la impresora aquí." -msgid "Raft contact Z distance" -msgstr "Distancia Z de contacto de la balsa(base de impresión)" +msgid "Printer variant" +msgstr "Variante de la impresora" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Raft contact Z distance" +msgstr "Distancia Z de contacto de la balsa (base de impresión)" + +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" -"Espacio Z entre el objeto y la balsa(base de impresión). Se ignora para la " +"Espacio Z entre el objeto y la balsa (base de impresión). Se ignora con una " "interfaz soluble" msgid "Raft expansion" -msgstr "Expansión de la balsa(base de impresión)" +msgstr "Expansión de la balsa (base de impresión)" -msgid "Expand all raft layers in XY plane" -msgstr "Expandir todas las capas de la balsa(base de impresión) en el plano XY" +msgid "Expand all raft layers in XY plane." +msgstr "" +"Expandir todas las capas de la balsa (base de impresión) en el plano XY" msgid "Initial layer density" msgstr "Densidad de la primera capa" -msgid "Density of the first raft or support layer" -msgstr "Densidad de la balsa(base de impresión)" +msgid "Density of the first raft or support layer." +msgstr "Densidad de la balsa (base de impresión) o capa de soporte" msgid "Initial layer expansion" msgstr "Expansión de la primera capa" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" -"Expandir la primera base de impresión o capa de soporte base para mejorar la " -"adherencia de la cama de la bandeja" +"Expandir la primera capa de la base de impresión o de soportes para mejorar " +"la adherencia con la superficie de impresión" msgid "Raft layers" msgstr "Capas de balsa (base de impresión)" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "El objeto será elevado por este número de capas de soporte. Utilice esta " -"función para evitar deformaciones al imprimir ABS" +"función para evitar deformaciones al imprimir u otros materiales sensibles a " +"las variaciones de temperatura" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" -"La ruta del G-Code se genera después de simplificar el contorno del modelo " -"para evitar demasiados puntos y líneas de código en el archivo de G-Code. Un " -"valor más pequeño significa una mayor resolución y más tiempo para cortar" +"El G-Code se genera después de simplificar el contorno del modelo para " +"evitar demasiados puntos y líneas de código en el archivo de G-Code. Un " +"valor más pequeño significa una mayor resolución y tiempo de laminado." msgid "Travel distance threshold" msgstr "Umbral de distancia de desplazamiento" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" -"Sólo se activa la retracción cuando la distancia de recorrido es superior a " -"este umbral" +"Sólo se activa la retracción cuando la distancia de desplazamiento es " +"superior a este umbral" msgid "Retract amount before wipe" -msgstr "Retrae cantidad antes de limpiar" +msgstr "Longitud de retracción antes de purgado" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"La longitud de la retracción rápida antes de la limpieza, en relación con la " +"La longitud de la retracción rápida antes de la purga, en relación con la " "longitud de la retracción" msgid "Retract when change layer" msgstr "Retracción al cambiar de capa" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Forzar una retracción al cambiar de capa" msgid "Retraction Length" @@ -12702,73 +15242,78 @@ msgstr "Longitud de retracción" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Una cierta cantidad de material en el extrusor se extrae para evitar el " -"rezumado durante el recorrido largo. Ajustar el cero para desactivar la " -"retracción" -msgid "Long retraction when cut(experimental)" -msgstr "Retracción larga al cortar (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Retracción larga al cortar (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Característica experimental. Retraer y cortar el filamento a mayor distancia " -"durante los cambios para minimizar la purga. Si bien esto reduce " -"significativamente la purga, también puede aumentar el riesgo de atascos de " -"boquillas u otros problemas de impresión." +"Función experimental: Retraer y cortar el filamento una mayor distancia " +"durante los cambios para minimizar el purgado. Si bien esto reduce " +"significativamente el purgado, también puede aumentar el riesgo de bloqueos " +"de boquillas u otros problemas de impresión." msgid "Retraction distance when cut" msgstr "Distancia de retracción al cortar" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Característica experimental. Longitud de retracción antes del corte durante " -"el cambio de filamento" +"Función experimental: Longitud de retracción antes del corte durante el " +"cambio de filamento" -msgid "Z hop when retract" -msgstr "Salto en Z al retraerse" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Altura de Salto en Z" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Cada vez que se realiza la retracción, la boquilla se levanta un poco para " -"crear un espacio libre entre la boquilla y la impresión. Esto evita que la " -"boquilla golpee la impresión cuando se desplaza. El uso de la línea espiral " -"para levantar z puede evitar el encordado" +"Cada vez que se realiza una retracción, la boquilla se levanta un poco para " +"crear un pequeño margen entre la boquilla y la impresión. Esto evita que la " +"boquilla golpee la pieza cuando se desplaza. El uso de la línea espiral para " +"levantar z puede evitar la aparción de hilos" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Límite inferior de salto Z" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Z hop sólo entrará en vigor cuando Z esté por encima de este valor y se " -"encuentre por debajo del parámetro: \"Límite superior del salto Z\"" +"El salto en Z sólo se usará cuando Z esté por encima de este valor y se " +"encuentre por debajo del parámetro: \"Límite superior de salto Z\"." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Límite superior de salto Z" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Si este valor es positivo, Z hop sólo entrará en vigor cuando Z esté por " -"encima del parámetro \"Límite inferior de salto Z\" y esté por debajo de " -"este valor" +"Si este valor es positivo, Z-hop sólo se usará cuando Z esté por encima del " +"parámetro \"Límite inferior de salto Z\" y por debajo de este valor." -msgid "Z hop type" +msgid "Z-hop type" msgstr "Tipo de salto Z" +msgid "Type of Z-hop." +msgstr "" + msgid "Slope" msgstr "Pendiente" @@ -12779,10 +15324,10 @@ msgid "Traveling angle" msgstr "Ángulo de desplazamiento" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" -"Ángulo de desplazamiento para el tipo de salto de Pendiente y Espiral Z. Si " +"Ángulo de desplazamiento para el tipo de salto Z de Pendiente y Espiral. Si " "se ajusta a 90°, se obtiene una elevación normal." msgid "Only lift Z above" @@ -12792,7 +15337,7 @@ msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z." msgstr "" -"Si lo ajusta a un valor positivo, la elevación de Z sólo tendrá lugar por " +"Si se ajusta a un valor positivo, la elevación de Z sólo tendrá lugar por " "encima de la Z absoluta especificada." msgid "Only lift Z below" @@ -12809,7 +15354,7 @@ msgid "On surfaces" msgstr "En las superficies" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Forzar el comportamiento de Salto Z. Este ajuste se ve afectado por los " @@ -12827,6 +15372,18 @@ msgstr "Solo Inferior" msgid "Top and Bottom" msgstr "Superior e Inferior" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Longitud extra de reinicio" @@ -12834,35 +15391,33 @@ msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Cuando la retracción se compensa después de un movimiento de viaje, el " -"extrusor expulsará esa cantidad de filamento adicional. Este ajuste " -"raramente se necesitará." +"Cuando la retracción se compensa después de un desplazamiento, el extrusor " +"expulsará esta cantidad adicional de filamento. Esta función no suele ser " +"necesaria." msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" -"Cuando se compensa la retracción después de cambiar de herramienta, el " -"extrusor empujará esta cantidad adicional de filamento." +"Cuando se compensa la retracción después de cambiar de cabezal, el extrusor " +"expulsará esta cantidad adicional de filamento." msgid "Retraction Speed" msgstr "Velocidad de retracción" -msgid "Speed of retractions" -msgstr "Velocidad de las retracciones" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" -msgstr "Velocidad de Desretracción" +msgid "De-retraction Speed" +msgstr "Velocidad de De-retracción" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Velocidad de recarga del filamento en el extrusor. Cero significa la misma " -"velocidad con la retracción" msgid "Use firmware retraction" -msgstr "Usar retracción de firmware" +msgstr "Usar retracción de firmware (beta)" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " @@ -12879,16 +15434,17 @@ msgid "Disable set remaining print time" msgstr "Desactivar tiempo de impresión restante" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Deshabilitar la generación del M73: Ajustar el tiempo de impresión restante " -"en el G-Code final" +"en el G-Code final." msgid "Seam position" msgstr "Posición de la costura" -msgid "The start position to print each part of outer wall" -msgstr "La posición inicial para imprimir cada parte del perímetro exterior" +msgid "The start position to print each part of outer wall." +msgstr "" +"Estrategia de posicionado del inicio de impersión de cada perímetro exterior" msgid "Nearest" msgstr "Más cercano" @@ -12896,6 +15452,9 @@ msgstr "Más cercano" msgid "Aligned" msgstr "Alineado" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Trasera" @@ -12927,7 +15486,7 @@ msgstr "" "diámetro actual del extrusor. El valor por defecto de este parámetro es 10%." msgid "Scarf joint seam (beta)" -msgstr "Costura de unión de bufanda (beta)" +msgstr "Unión de bufanda en costuras (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" @@ -12942,10 +15501,10 @@ msgid "" "conceal the seams at sharp corners effectively." msgstr "" "Aplique juntas de bufanda sólo en perímetros lisos en los que las juntas " -"tradicionales no oculten eficazmente las juntas en esquinas afiladas." +"tradicionales no oculten eficazmente las juntas en vértices pronunciados." msgid "Conditional angle threshold" -msgstr "Umbral angular condicional" +msgstr "Umbral angular para union de bufanda condicional" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12961,7 +15520,7 @@ msgstr "" "bufanda. El valor por defecto es 155°." msgid "Conditional overhang threshold" -msgstr "Umbral de voladizo condicional" +msgstr "Umbral de voladizo para unión de bufanda condicional" #, no-c-format, no-boost-format msgid "" @@ -12971,34 +15530,35 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" -"Esta opción establece el ángulo umbral para aplicar una costura de unión de " -"bufanda condicional. Si el ángulo máximo dentro del bucle perimetral supera " -"este valor (indicando la ausencia de esquinas finas), se utilizará una " -"costura de unión de bufanda. El valor por defecto es 155°." +"Esta opción establece el umbral de voladizo para aplicar una costura de " +"unión de bufanda condicional. Si el área sin soporte del perémetro es menor " +"a este valor se utilizará una costura de unión de bufanda. El valor por " +"defecto está configurado como un 40% del grosor del perímetro exterior. El " +"ángulo de voladizo es estimado automáticamente por razones de optimización." msgid "Scarf joint speed" msgstr "Velocidad de unión de bufanda" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Esta opción ajusta la velocidad de impresión para las uniones de bufanda. Se " "recomienda imprimir las uniones de bufanda a una velocidad lenta (inferior a " -"100 mm/s). También es aconsejable activar la opción \"Suavizado de la " -"velocidad de extrusión\" si la velocidad ajustada varía significativamente " -"de la velocidad de los perímetros exteriores o interiores. Si la velocidad " -"especificada aquí es superior a la velocidad de los perímetros exteriores o " -"interiores, la impresora utilizará por defecto la velocidad más lenta de las " -"dos. Si se especifica como porcentaje (por ejemplo, 80%), la velocidad se " -"calcula en función de la velocidad de el perímetro exterior o interior. El " -"valor predeterminado es 100%." +"100 mm/s). También es aconsejable activar la opción \"Suavizado de la " +"velocidad de extrusión\" si la velocidad configurada varía " +"significativamente de la velocidad de los perímetros exteriores o " +"interiores. Si la velocidad especificada aquí es superior a la velocidad de " +"los perímetros exteriores o interiores, la impresora utilizará por defecto " +"la velocidad más lenta de las dos. Si se especifica como porcentaje (por " +"ejemplo, 80%), la velocidad se calcula en función de la velocidad del " +"perímetro exterior o interior. El valor predeterminado es 100%." msgid "Scarf joint flow ratio" msgstr "Relación de flujo de la unión de bufanda" @@ -13016,14 +15576,14 @@ msgid "" "current layer height. The default value for this parameter is 0." msgstr "" "Altura inicial de la bufanda . Esta cantidad puede especificarse en " -"milímetros o como porcentaje de la altura actual de la capa. El valor por " +"milímetros o como porcentaje de la altura de la capa actual. El valor por " "defecto de este parámetro es 0." msgid "Scarf around entire wall" -msgstr "Espiga alrededor de toda el perímetro" +msgstr "Bufanda en todo el perímetro" msgid "The scarf extends to the entire length of the wall." -msgstr "La bufanda se extiende a lo largo de toda el perímetro." +msgstr "La bufanda se extiende a lo largo de todo el perímetro." msgid "Scarf length" msgstr "Largo de la bufanda" @@ -13042,26 +15602,27 @@ msgid "Minimum number of segments of each scarf." msgstr "Número mínimo de segmentos de cada bufanda." msgid "Scarf joint for inner walls" -msgstr "Junta de bufanda para perímetros interiores" +msgstr "Unión de bufanda para perímetros interiores" msgid "Use scarf joint for inner walls as well." -msgstr "Utilice también una junta de bufanda para perímetros internos." +msgstr "Utilice también una unión de bufanda para perímetros internos." msgid "Role base wipe speed" -msgstr "Velocidad de limpieza según tipo de línea" +msgstr "Velocidad de purga según tipo de línea" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"La velocidad de limpieza viene determinada por la velocidad de extrusión " -"actual. Por ejemplo, si se ejecuta una acción de limpieza inmediatamente " +"La velocidad de purga viene determinada por la velocidad de extrusión " +"actual. Por ejemplo, si se ejecuta una acción de purga inmediatamente " "después de una extrusión del perímetro exterior, se utilizará la velocidad " -"de la extrusión del perímetro exterior para la acción de limpieza." +"de la extrusión del perímetro exterior para la acción de purgado." msgid "Wipe on loops" -msgstr "Limpieza en contornos curvos" +msgstr "Purgado en contornos curvos" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " @@ -13072,57 +15633,75 @@ msgstr "" "la curva." msgid "Wipe before external loop" -msgstr "Limpiar antes del bucle externo" +msgstr "Purgado antes del bucle externo" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Para minimizar la visibilidad de una posible sobreextrusión al inicio de un " "perímetro externo al imprimir con el orden de impresión de perímetro " -"Exterior/Interior o Interior/Exterior/Interior, la desretracción se realiza " +"Exterior/Interior o Interior/Exterior/Interior, la de-retracción se realiza " "ligeramente en el interior desde el inicio del perímetro externo. De esta " "forma, cualquier posible sobreextrusión queda oculta desde la superficie " "exterior.\n" "\n" "Esto es útil cuando se imprime con orden de impresión Exterior/Interior o " "Interior/Exterior/Interior ya que en estos modos es más probable que se " -"imprima un perímetro exterior inmediatamente después de un movimiento de " -"desretracción." +"imprima un perímetro exterior inmediatamente después de un movimiento de de-" +"retracción." msgid "Wipe speed" -msgstr "Velocidad de limpieza" +msgstr "Velocidad de purgado" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"La velocidad de limpieza es determinada por el ajuste de velocidad La " -"velocidad de limpieza es determinada por el ajuste de velocidad especificado " -"en esta configuración. Si el valor se expresa en porcentaje (por ejemplo, " -"80%), se calculará en función del ajuste de velocidad de desplazamiento " -"anterior. El valor por defecto de este parámetro es 80%" +"La velocidad de purgado es determinada por este parámetro. Si el valor se " +"expresa como un porcentaje (por ejemplo, 80%), se calculará en función del " +"ajuste de velocidad de desplazamiento anterior. El valor por defecto de este " +"parámetro es 80%." msgid "Skirt distance" msgstr "Distancia de falda" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Distancia de la falda al borde de adherencia o al objeto" +msgid "Skirt start point" +msgstr "Punto de inicio de la falda" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Ángulo desde el centro del objeto al punto de inicio de la falda. Cero es la " +"posición más a la derecha, en sentido antihorario es ángulo positivo." + msgid "Skirt height" msgstr "Altura de falda" -msgid "How many layers of skirt. Usually only one layer" -msgstr "C capas de falda. Normalmente sólo una capa" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Cantidad de capas de falda. Normalmente sólo una capa" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "Protector contra corrientes de aire" @@ -13130,45 +15709,46 @@ msgstr "Protector contra corrientes de aire" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" "Un protector contra corrientes de aire es útil para proteger una impresión " "en ABS o ASA de la deformación y el desprendimiento de la cama de impresión " -"debido a los flujos de aire. Suele ser necesario solo en impresoras de " +"debido a las corrientes de aire. Suele ser necesario sólo con impresoras de " "bastidor abierto, es decir, sin cerramiento.\n" "\n" -"Opciones:\n" -"Activado = la falda es tan alta como el objeto impreso más alto.\n" -"Limitado = la falda es tan alta cómo se especifica en el ajuste \"Altura de " -"falda\"\n" -"\n" -"Nota: Con el protector contra corrientes de aire activo, la falda se " -"imprimirá a la distancia especificada en \"Distancia de falda\" del objeto. " -"Por lo tanto, si los bordes están activos, puede cruzarse con ellos. Para " -"evitarlo, aumente el valor de la \"Distancia de falda\".\n" -"imprimirá a la distancia especificada en \"Distancia de falda\" del objeto. " -"Por lo tanto, si los bordes están activos, puede cruzarse con ellos. Para " -"evitarlo, aumente el valor de la \"Distancia de la falda\".\n" - -msgid "Limited" -msgstr "Limitado" +"Activado = el faldón es tan alto como el objeto impreso más alto. Nota: Con " +"el protector contra corrientes de aire activo, el faldón se imprimirá a la " +"distancia del faldón del objeto. Por lo tanto, si los bordes están activos, " +"puede que se crucen con ellos. Para evitarlo, aumente el valor de la " +"distancia del faldón.\n" msgid "Enabled" msgstr "Activado" -msgid "Skirt loops" -msgstr "Contorno de la falda" +msgid "Skirt type" +msgstr "Tipo de falda" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "Número de bucles de la falda. Cero significa desactivar el faldón" +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Combinado - faldón único para todos los objetos, Por objeto - faldón " +"individual para cada objeto." + +msgid "Per object" +msgstr "Por objeto" + +msgid "Skirt loops" +msgstr "Bucles de la falda" + +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Número de bucles de la falda. Cero significa desactivar la falda" msgid "Skirt speed" msgstr "Velocidad de falda" @@ -13185,74 +15765,107 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"Longitud mínima de extrusión de filamento en mm al imprimir la falda. Cero " -"significa que esta función está desactivada.\n" +"Longitud mínima de extrusión de filamento en mm al imprimir el faldón. Cero " +"significa que esta característica está desactivada.\n" "\n" "El uso de un valor distinto de cero es útil si la impresora está configurada " -"para imprimir sin una línea de purga." +"para imprimir sin una línea principal.\n" +"El número final de bucles no se tiene en cuenta al organizar o validar la " +"distancia de los objetos. En este caso, aumente el número de bucles." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "La velocidad de impresión en el G-Code exportado se ralentizará, cuando el " "tiempo estimado de la capa sea inferior a este valor, para conseguir una " -"mejor refrigeración de estas capas" +"mejor refrigeración de estas capas." msgid "Minimum sparse infill threshold" -msgstr "Área umbral de relleno sólido" +msgstr "Umbral de área mínima de relleno de baja densidad" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"El área de relleno de baja densidad que es menor que el valor del umbral se " +"El área de relleno de baja densidad que es menor que este valor de umbral se " "sustituye por un relleno sólido interno" +msgid "Solid infill" +msgstr "Relleno sólido interno" + +msgid "Filament to print solid infill." +msgstr "Filamento para imprimir relleno sólido interno" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Ancho de extrusión del relleno sólido interno. Si se expresa cómo %, se " -"calculará sobre el diámetro de la boquilla." +"Ancho de línea del relleno sólido interno. Si se expresa cómo %, se " +"calculará en base al diámetro de la boquilla." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" -"Velocidad del relleno sólido interno, no la superficie superior e inferior" +"Velocidad del relleno sólido interno, no de la superficie superior o inferior" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"Spiralize suaviza los movimientos z del contorno exterior. Y convierte un " -"modelo sólido en una impresión de una soel perímetro con capas inferiores " -"sólidas. El modelo final generado no tiene costura" +"El modo espiral suaviza los movimientos z del contorno exterior. Convierte " +"un modelo sólido en una impresión de un solo perímetro con capas inferiores " +"sólidas. El modelo final generado no tiene costuras" msgid "Smooth Spiral" -msgstr "Suavizar Espiral" +msgstr "Espiral Suave" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Suavizar Espiral suaviza también los movimientos X e Y, con lo que no se " +"Espiral Suave suaviza también los movimientos en X e Y, con lo que no se " "aprecia ninguna costura, ni siquiera en las direcciones XY en perímetros que " "no son verticales" msgid "Max XY Smoothing" msgstr "Suavizado XY Máximo" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Distancia máxima a desplazar los puntos en XY para intentar conseguir una " -"espiral suave, si se expresa en %, se calculará sobre el diámetro de la " -"tobera" +"espiral suave. Si se expresa en %, se calculará en base al diámetro de la " +"boquilla" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13268,10 +15881,10 @@ msgstr "" "lapse para cada impresión. Después de imprimir cada capa, se toma una " "instantánea con la cámara. Todas estas instantáneas se componen en un vídeo " "time-lapse cuando finaliza la impresión. Si se selecciona el modo suave, el " -"cabezal de la herramienta se moverá a la rampa de exceso después de cada " -"capa se imprime y luego tomar una instantánea. Dado que el filamento fundido " -"puede gotear de la boquilla durante el proceso de tomar una instantánea, la " -"torre de purga es necesaria para el modo suave de limpiar la boquilla." +"cabezal se moverá a la rampa de exceso después de imprimir cada capa y luego " +"toma una instantánea. Dado que el filamento fundido puede rezumar de la " +"boquilla durante el proceso de toma de la instantánea, una torre de purga es " +"necesaria para el modo suave para limpiar la boquilla." msgid "Traditional" msgstr "Tradicional" @@ -13279,19 +15892,54 @@ msgstr "Tradicional" msgid "Temperature variation" msgstr "Variación de temperatura" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Diferencia de temperatura a aplicar cuando un extrusor no está activo. El " +"valor no se utiliza cuando 'idle_temperature' en los ajustes de filamento se " +"establece en un valor distinto de cero." + +msgid "Preheat time" +msgstr "Tiempo de Precalentamiento" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Para reducir el tiempo de espera tras el cambio de cabezal, Orca puede " +"precalentar el siguiente cabezal mientras el cabezal actual todavía está en " +"uso. Este ajuste especifica el tiempo en segundos para precalentar la " +"siguiente herramienta. Orca insertará un comando M104 para precalentar el " +"cabezal por adelantado." + +msgid "Preheat steps" +msgstr "Pasos de precalentamiento" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Insertar múltiples comandos de precalentamiento (por ejemplo, M104.1). Sólo " +"útil para Prusa XL. Para otras impresoras, por favor ajústar a 1." + msgid "Start G-code" msgstr "G-Code inicial" -msgid "Start G-code when start the whole printing" -msgstr "Inicie el G-Code cuando comience la impresión completa" +msgid "Start G-code when starting the entire print." +msgstr "G-Code de inicio cuando se comienza la impresión del archivo" -msgid "Start G-code when start the printing of this filament" -msgstr "Inicie el G-Code al comenzar la impresión de este filamento" +msgid "Start G-code when starting the printing of this filament." +msgstr "G-Code de inicio cuando se comienza la impresión de este filamento" msgid "Single Extruder Multi Material" -msgstr "Extrusor Único Multi Material" +msgstr "Multi Material con Extrusor Único" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "Usa una único boquilla para imprimir multifilamento" msgid "Manual Filament Change" @@ -13304,8 +15952,8 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"Active esta opción para omitir el G-Code personalizado Cambiar filamento " -"sólo al principio de la impresión. El comando de cambio de herramienta (por " +"Active esta opción para omitir el G-Code personalizado de Cambiar filamento " +"sólo al principio de la impresión. El comando de cambio de cabezal (por " "ejemplo, T0) se omitirá durante toda la impresión. Esto es útil para la " "impresión manual multi-material, donde utilizamos M600/PAUSE para activar la " "acción manual de cambio de filamento." @@ -13313,25 +15961,25 @@ msgstr "" msgid "Purge in prime tower" msgstr "Purgar en una torre" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "Purgar el filamento restante en una torre" msgid "Enable filament ramming" -msgstr "Activar el moldeado de extremo del filamento" +msgstr "" msgid "No sparse layers (beta)" msgstr "Sin capas de baja densidad (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" "Sí está activado, la torre de purga no se imprimirá en las capa sin cambio " -"de herramienta. En las capas con cambio de herramienta, viajará hacía abajo " -"para imprimir la torre de purga. El usuario es responsable de asegurarse que " -"no hay colisiones con la impresión." +"de cabezal. En las capas con cambio de cabezal, viajará hacía abajo para " +"imprimir la torre de purga. El usuario es responsable de asegurarse que no " +"hay colisiones con la impresión." msgid "Prime all printing extruders" msgstr "Purgar todos los extrusores" @@ -13340,8 +15988,8 @@ msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Sí está activada, todos los extrusores serán purgados en el lado delantero " -"de la cama de impresión al inicio de la impresión." +"Sí se activa, todos los extrusores serán purgados en el frontal de la cama " +"de impresión al inicio de la impresión." msgid "Slice gap closing radius" msgstr "Radio de cierre de laminado" @@ -13351,10 +15999,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Las grietas más pequeñas que el radio de cierre 2x se rellenan durante el " -"corte de la malla triangular. La operación de cierre de huecos puede reducir " -"la resolución de impresión final, por lo que es aconsejable mantener el " -"valor razonablemente bajo." +"Las grietas más pequeñas que 2x el radio de cierre se rellenan durante el " +"laminado de la malla triangular. La operación de cierre de huecos puede " +"reducir la resolución de impresión final, por lo que es aconsejable mantener " +"el valor razonablemente bajo." msgid "Slicing Mode" msgstr "Modo de laminado" @@ -13385,9 +16033,11 @@ msgid "" "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "Este valor se sumará (o restará) de todas las coordenadas Z en el G-Code de " -"salida. Se utiliza para compensar el desfase de Z del “Endstop Z”.\n" -"Por ejemplo, si tu “Endstop cero” deja la boquilla a distancia 0.3mm de la " -"cama de impresión, establecer este valor a -0,3 compensará este desfase." +"salida. Se utiliza para compensar el desfase de Z del interruptor de final " +"de carrera de Z.\n" +"Por ejemplo, si tu fin de carrera deja la boquilla a una distancia de 0.3mm " +"de la cama de impresión, establecer este valor a -0,3 compensará este " +"desfase." msgid "Enable support" msgstr "Habilitar los soportes" @@ -13395,44 +16045,51 @@ msgstr "Habilitar los soportes" msgid "Enable support generation." msgstr "Habilitar la generación de soportes." +#, fuzzy msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normal(auto) y Árbol(auto) se utilizan para generar los soportes " -"automáticamente. Si se selecciona normal(manual) o árbol(manual), sólo se " -"generan los refuerzos de apoyo" +"Normal (auto) y Árbol (auto) se utilizan para generar los soportes " +"automáticamente. Si se selecciona Normal (manual) o Árbol (manual), sólo se " +"generan los soportes forzados." -msgid "normal(auto)" -msgstr "Normal(auto)" +msgid "Normal (auto)" +msgstr "Normal (auto)" -msgid "tree(auto)" -msgstr "Árbol(auto)" +msgid "Tree (auto)" +msgstr "Árbol (auto)" -msgid "normal(manual)" -msgstr "Normal(manual)" +msgid "Normal (manual)" +msgstr "Normal (manual)" -msgid "tree(manual)" -msgstr "Árbol(manual)" +msgid "Tree (manual)" +msgstr "Árbol (manual)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Distancia soporte/objeto X-Y" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Separación XY entre un objeto y su soporte" +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "Ángulo del patrón" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "" -"Utilice este ajuste para girar el patrón de soporte en el plano horizontal." +"Utilice este ajuste para rotar el patrón de soporte en el plano horizontal." msgid "On build plate only" msgstr "Sólo en la bandeja de impresión" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "" "No crear soporte en la superficie del modelo, sólo en la bandeja de impresión" @@ -13443,25 +16100,25 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Cree soportes sólo para las regiones críticas, como la cola afilada, el " -"voladizo, etc." +"Cree soportes sólo para las regiones críticas, como puntas afiladas, " +"voladizos, etc." -msgid "Remove small overhangs" -msgstr "Eliminar voladizos pequeños" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Elimina los voladizos pequeños que posiblemente no necesiten soportes." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Distancia Z superior" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "La distancia z entre la interfaz de soporte superior y el objeto" msgid "Bottom Z distance" msgstr "Distancia Z inferior" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "La distancia z entre la interfaz de apoyo inferior y el objeto" msgid "Support/raft base" @@ -13469,14 +16126,14 @@ msgstr "Capa base/balsa" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filamento para imprimir la base de soporte y la balsa de impresión. \"Por " "defecto\" significa que no hay filamento específico para el soporte y se " -"utiliza el filamento actual" +"utiliza el filamento actual." msgid "Avoid interface filament for base" -msgstr "Evitar el interfaz de filamento para la base" +msgstr "Evitar usar filamento de interfaz para la base" msgid "" "Avoid using support interface filament to print support base if possible." @@ -13488,8 +16145,8 @@ msgid "" "Line width of support. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Ancho de extrusión de los soportes Si se expresa cómo %, se calculará sobre " -"el diámetro de la boquilla." +"Ancho de línea de los soportes. Si se expresa como %, se calculará en base " +"al diámetro de la boquilla." msgid "Interface use loop pattern" msgstr "Uso de la interfaz en forma de bucle" @@ -13505,7 +16162,7 @@ msgstr "Interfaz de soporte/balsa" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filamento para imprimir interfaz de soporte. \"Por defecto\" significa que " "no hay filamento específico para la interfaz de soporte y se utiliza el " @@ -13514,41 +16171,41 @@ msgstr "" msgid "Top interface layers" msgstr "Capas de la interfaz superior" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Número de capas de interfaz superior" msgid "Bottom interface layers" msgstr "Capas de la interfaz inferior" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Número de capas de la interfaz inferior" msgid "Same as top" msgstr "Lo mismo que la superior" msgid "Top interface spacing" -msgstr "Distancia de la interfaz superior" +msgstr "Espaciado de la interfaz superior" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Espacio de las líneas de interfaz. Cero significa que la interfaz es sólida" msgid "Bottom interface spacing" -msgstr "Distancia de la interfaz inferior" +msgstr "Espaciado de la interfaz inferior" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" -"Espacio entre las líneas de la interfaz inferior. Cero significa interfaz " -"sólida" +"Espaciado de las líneas de interfaz. Cero significa que la interfaz es sólida" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Velocidad de la interfaz de soporte" msgid "Base pattern" msgstr "Patrón de base" -msgid "Line pattern of support" -msgstr "Patrón lineal de apoyo" +msgid "Line pattern of support." +msgstr "Patrón de líneas de soportes" msgid "Rectilinear grid" msgstr "Rejilla rectilínea" @@ -13562,7 +16219,7 @@ msgstr "Patrón de interfaz" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Patrón de líneas de la interfaz de soporte. El patrón por defecto para la " "interfaz de soporte no soluble es Rectilíneo, mientras que el patrón por " @@ -13572,18 +16229,18 @@ msgid "Rectilinear Interlaced" msgstr "Entrelazado rectilíneo" msgid "Base pattern spacing" -msgstr "Separación del patrón base" +msgstr "Espaciado del patrón base" -msgid "Spacing between support lines" -msgstr "Espacio entre las líneas de apoyo" +msgid "Spacing between support lines." +msgstr "Espaciado entre las líneas de apoyo" msgid "Normal Support expansion" msgstr "Expansión de Soporte Normal" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "Ampliar (+) o reducir (-) la expansión horizontal del soporte normal" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." +msgstr "Ampliar (+) o reducir (-) la expansión horizontal del soporte Normal" -msgid "Speed of support" +msgid "Speed of support." msgstr "Velocidad en soportes" msgid "" @@ -13595,20 +16252,26 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" -"Estilo y forma del soporte. Para el soporte normal, proyectar los soportes " +"Estilo y forma del soporte. Para el soporte Normal, proyectar los soportes " "en una cuadrícula regular creará soportes más estables (por defecto), " "mientras que las torres de soporte ajustadas ahorrarán material y reducirán " "las cicatrices del objeto.\n" -"Para el soporte arbóreo, el estilo esbelto y orgánico fusionará las ramas de " -"forma más agresiva y ahorrará mucho material (orgánico por defecto), " -"mientras que el estilo híbrido creará una estructura similar a la del " -"soporte normal bajo grandes voladizos planos." +"Para el soporte Árbol, los estilos Esbelto y Orgánico fusionarán las ramas " +"de forma más agresiva y ahorrará mucho material (Orgánico por defecto), " +"mientras que el estilo Híbrido creará una estructura similar a la del " +"soporte Normal bajo grandes voladizos planos." + +msgid "Default (Grid/Organic)" +msgstr "Por defecto (Rejilla/Orgánico)" msgid "Snug" msgstr "Ajustado" +msgid "Organic" +msgstr "Orgánico" + msgid "Tree Slim" -msgstr "Árbol Delgado" +msgstr "Árbol Esbelto" msgid "Tree Strong" msgstr "Árbol Fuerte" @@ -13616,19 +16279,17 @@ msgstr "Árbol Fuerte" msgid "Tree Hybrid" msgstr "Árbol Híbrido" -msgid "Organic" -msgstr "Orgánico" - msgid "Independent support layer height" msgstr "Altura independiente de la capa de soporte " msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "La capa de soporte utiliza una altura de capa independiente de la capa del " -"objeto. Esta opción no será válida si la torre de purga está activada." +"objeto. Esto permite la personalización de la distancia Z y ahorra tiempo de " +"impresión. Esta opción es compatible con la torre de purga." msgid "Threshold angle" msgstr "Pendiente máxima" @@ -13640,16 +16301,25 @@ msgstr "" "Se generará un soporte para los voladizos cuyo ángulo de inclinación sea " "inferior al umbral." -msgid "Tree support branch angle" -msgstr "Ángulo de la rama de soporte del árbol" +msgid "Threshold overlap" +msgstr "" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + +msgid "Tree support branch angle" +msgstr "Ángulo de las rama de soporte Árbol" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"Este ajuste determina el ángulo máximo de voladizo que pueden hacer las " -"ramas del soporte del árbol. Si se aumenta el ángulo, las ramas pueden " +"Este ajuste determina el ángulo máximo de voladizo que pueden tener las " +"ramas del soporte de Árbol. Si se aumenta el ángulo, las ramas pueden " "imprimirse más horizontalmente, permitiendo que lleguen más lejos." msgid "Preferred Branch Angle" @@ -13671,8 +16341,8 @@ msgstr "Distancia de la rama de soporte del árbol" msgid "" "This setting determines the distance between neighboring tree support nodes." msgstr "" -"Este ajuste determina la distancia entre los nodos de soporte del árbol " -"vecinos." +"Este ajuste determina la distancia entre los nodos de soporte vecinos de un " +"árbol." msgid "Branch Density" msgstr "Densidad de ramas" @@ -13691,30 +16361,20 @@ msgstr "" "activar las interfaces de soporte superior en lugar de un valor de densidad " "de rama alto si se necesitan interfaces densas." -msgid "Adaptive layer height" -msgstr "Altura de capa adaptable" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Si se activa esta opción, se calculará automáticamente la altura de todas " -"las capas de soporte de los árboles excepto la primera. " - msgid "Auto brim width" msgstr "Ancho de borde de adherencia automático" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Si activa esta opción, se calculará automáticamente la anchura del borde de " -"adherencia para el soporte del árbol" +"adherencia para el soporte de Árbol" msgid "Tree support brim width" msgstr "Anchura del borde de adherencia" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" "Distancia desde la rama del árbol hasta la línea más externa del borde de " "adherencia" @@ -13748,68 +16408,120 @@ msgstr "" "uniforme a lo largo de su longitud. Un poco de ángulo puede aumentar la " "estabilidad del soporte orgánico." -msgid "Branch Diameter with double walls" -msgstr "Baja densidad de ramas" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Las ramas con un área mayor que el área de un círculo de este diámetro se " -"imprimirán con doble perímetro para mayor estabilidad. Establezca este valor " -"en cero para no tener doble perímetro." - msgid "Support wall loops" msgstr "Bucles de perímetro de apoyo" -msgid "This setting specify the count of walls around support" -msgstr "Este ajuste especifica el número de perímetros alrededor del soporte" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" msgid "Tree support with infill" -msgstr "Soporte de árbol con relleno" +msgstr "Soporte de Árbol con relleno" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." +msgstr "" +"Este ajuste especifica si se añade relleno dentro de los grandes huecos de " +"los soportes de Árbol" + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" msgstr "" -"Este ajuste especifica si se añade relleno dentro de los grandes huecos del " -"soporte del árbol" msgid "Activate temperature control" msgstr "Activar control de temperatura" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Active esta opción para controlar la temperatura de la cámara. Se añadirá un " -"comando M191 antes de \"machine_start_gcode\"\n" -"Comandos G-Code: M141/M191 S(0-255)" +"Habilite esta función para usar un control automático de la temperatura de " +"la cámara. Cuando está habilitada, se emitirá un comando M191 antes de " +"\"machine_start_gcode\".\n" +"Este comando especifica la temperatura objetivo de la cámara y mantendrá la " +"impresora en espera hasta que se alcance dicha temperatura. Adicionalmente, " +"se emite un comando M141 al finalizar la impresión para apagar el sistema de " +"calentamiento de cámara, en caso de existir.\n" +"\n" +"Esta función requiere de que el firmware de la impresora sea compatible con " +"los comandos M191 y M141, ya sea nativamente o mediante el uso de macros. " +"Esta función se usa generalmente con impresoras con sistema de calentamiento " +"de cámara activo." msgid "Chamber temperature" msgstr "Temperatura de cámara" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" "Una mayor temperatura de la cámara puede ayudar a suprimir o reducir la " "deformación y potencialmente conducir a una mayor resistencia de unión entre " "capas para materiales de alta temperatura como ABS, ASA, PC, PA, etc. Al " -"mismo tiempo, la filtración de aire de ABS y ASA empeorará. Mientras que " -"para PLA, PETG, TPU, PVA y otros materiales de baja temperatura, la " -"temperatura real de la cámara no debe ser alta para evitar obstrucciones, " -"por lo que 0, que significa apagar, es muy recomendable" +"mismo tiempo, la filtración de aire de ABS y ASA empeorará.\n" +"\n" +"Por otro lado, materiales como PLA, PETG, TPU, PVA y otros materiales de " +"baja temperatura, la temperatura real de la cámara no debe ser alta para " +"evitar obstrucciones causadas por reblandecimiento del filamento en el " +"disipador.\n" +"\n" +"Cuando se activa, este parámetro crea una variable de G-Code llamada " +"chamber_temperature, que puede ser utilizada en macros personalizados, por " +"ejemplo el macro de PRINT_START, para controlar el precalentamiento en " +"impresoras encapsuladas que cuenten con un sensor de temperatura de cámara. " +"Ejemplo de uso: \n" +"PRINT_START (otras variables) CHAMBER_TEMP=[chamber_temperature] \n" +"Esta funciuón es útil para imrpesoras no compatibles con los comandos M141 o " +"M191, o si prefiere realizar un precalentamiento usando un macro si no " +"dispone de un sistema de calentamiento activo de cámara." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Temperatura de la boquilla después de la primera capa" msgid "Detect thin wall" @@ -13817,30 +16529,30 @@ msgstr "Detección de perímetros delgados" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Detectar los perímetros delgados que no pueden contener dos líneas de ancho, " "y utilizar una sola línea para imprimir. Tal vez no se imprima muy bien, " "debido a que no es de bucle cerrado" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Este G-Code se inserta al cambiar de filamento, incluyendo el comando T para " -"activar el cambio de herramienta" +"activar el cambio de cabezal." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Este G-Code se inserta cuando se cambia el rol de extrusión" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Este G-Code se inserta cuando se cambia el rol de extrusión." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Ancho de extrusión de las capas superiores. Si se expresa cómo %, se " -"calculará sobre el diámetro de la boquilla." +"Ancho de línea de las capas superiores. Si se expresa cómo %, se calculará " +"en base al diámetro de la boquilla." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Velocidad del relleno de la superficie superior que es sólida" msgid "Top shell layers" @@ -13849,7 +16561,7 @@ msgstr "Capas de la cubierta superior" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Es el número de capas sólidas de la cubierta superior, incluida la capa " "superficial superior. Si el grosor calculado por este valor es menor que el " @@ -13857,7 +16569,7 @@ msgstr "" "incrementarán" msgid "Top solid layers" -msgstr "Capas solidas arriba" +msgstr "Capas solidas superiores" msgid "Top shell thickness" msgstr "Espesor mínimo de la cubierta superior" @@ -13866,52 +16578,73 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "El número de capas sólidas superiores se incrementa al laminar si el espesor " "calculado por las capas de la cubierta es más delgado que este valor. Esto " -"puede evitar tener una capa demasiado fina cuando la altura de la capa es " -"pequeña. 0 significa que este ajuste está desactivado y el grosor de la capa " -"superior está absolutamente determinado por las capas de la cubierta superior" +"puede evitar tener una cubierta demasiado fina cuando la altura de la capa " +"es pequeña. 0 significa que este ajuste está desactivado y el grosor de la " +"capa superior está absolutamente determinado por las capas de la cubierta " +"superior" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Velocidad de desplazamiento más rápida y sin extrusión" msgid "Wipe while retracting" -msgstr "Limpiar mientras se retrae" +msgstr "Purgar mientras se retrae" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Mueva la boquilla a lo largo de la última trayectoria de extrusión cuando se " -"retraiga para limpiar el material filtrado en la boquilla. Esto puede " +"retraiga para limpiar el material rezumado en la boquilla. Esto puede " "minimizar las manchas cuando se imprime una nueva pieza después del recorrido" msgid "Wipe Distance" -msgstr "Distancia de limpieza" +msgstr "Distancia de purgado" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" -"Describa cuánto tiempo se moverá la boquilla a lo largo de la última " -"trayectoria al retraerse. \n" +"Describa cuánto distancia se moverá la boquilla a lo largo de la última " +"trayectoria al retraerse.\n" "\n" -"Dependiendo de la duración de la operación de barrido y de la velocidad y " +"Dependiendo de la duración de la operación de purgado y de la velocidad y " "longitud de los ajustes de retracción del extrusor/filamento, puede ser " -"necesario un movimiento de retracción para retraer el filamento restante. \n" +"necesario un movimiento de retracción para retraer el filamento restante.\n" "\n" -"Fijando un valor en la cantidad de retracción antes del barrido se realizará " -"cualquier exceso de retracción antes del barrido, de lo contrario se " +"Fijando un valor en la cantidad de retracción antes del purgado se realizará " +"cualquier exceso de retracción antes del purgado, de lo contrario se " "realizará después." msgid "" @@ -13921,7 +16654,13 @@ msgid "" msgstr "" "La torre de purga puede utilizarse para limpiar los residuos de la boquilla " "y estabilizar la presión de la cámara en el interior de la boquilla, con el " -"fin de evitar defectos de aspecto al imprimir objetos." +"fin de evitar defectos de visuales al imprimir objetos." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "Volúmenes de purga" @@ -13933,24 +16672,29 @@ msgid "" "The actual flushing volumes is equal to the flush multiplier multiplied by " "the flushing volumes in the table." msgstr "" -"El volumen de flujo real es igual al multiplicador de flujo multiplicado por " +"El volumen de flujo real es igual al producto del multiplicador de flujo y " "los volúmenes de flujo de la tabla." msgid "Prime volume" -msgstr "Tamaño de purga" +msgstr "Volumen de purga" msgid "The volume of material to prime extruder on tower." -msgstr "El volumen de material para cebar la extrusora en la torre." +msgstr "El volumen de material para purgar la extrusora en la torre." -msgid "Width of prime tower" -msgstr "Anchura de la torre de purga" +msgid "Width of the prime tower." +msgstr "Ancho de la torre de purga" msgid "Wipe tower rotation angle" msgstr "Ángulo de rotación de torre de purga" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Ángulo de rotación con respecto al eje X." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Ángulo de vértice del cono de estabilización" @@ -13958,15 +16702,9 @@ msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Ángulo del vértice del cono que se usa para estabilidad la torre de purga. " +"Ángulo del vértice del cono que se usa para estabilizar la torre de purga. " "Un angulo mayor significa una base más ancha." -msgid "Wipe tower purge lines spacing" -msgstr "Separación de las líneas de la torre de purga" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Separación de las líneas de la torre de purga." - msgid "Maximum wipe tower print speed" msgstr "Velocidad máxima de impresión de la torre de purga" @@ -13984,7 +16722,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13992,48 +16730,90 @@ msgid "" "regardless of this setting." msgstr "" "La velocidad máxima de impresión al purgar en la torre de purga e imprimir " -"las capas dispersas de la torre de purga. Al purgar, si la velocidad de " -"relleno de baja densidad o la velocidad calculada a partir de la velocidad " -"volumétrica máxima del filamento es inferior, se utilizará la velocidad más " -"baja.\n" +"las capas de baja densidad de la torre de purga. Al purgar, si la velocidad " +"de relleno de baja densidad o la velocidad calculada a partir de la " +"velocidad volumétrica máxima del filamento es inferior, se utilizará la " +"velocidad más baja.\n" "\n" -"Al imprimir las capas dispersas, si la velocidad del perímetro interno o la " -"velocidad calculada a partir de la velocidad volumétrica máxima del " -"filamento es inferior, se utilizará la velocidad más baja.\n" +"Al imprimir las capas de baja densidad, si la velocidad del perímetro " +"interno o la velocidad calculada a partir de la velocidad volumétrica máxima " +"del filamento es inferior, se utilizará la velocidad más baja.\n" "\n" "Aumentar esta velocidad puede afectar a la estabilidad de la torre, así como " -"aumentar la fuerza con la que la boquilla colisiona con las manchas que se " -"hayan podido formar en la torre de purga.\n" +"aumentar la fuerza con la que la boquilla colisiona con las acummulaciones " +"que se hayan podido formar en la torre de purga.\n" "\n" -"Antes de aumentar este parámetro más allá del valor por defecto de 90mm/seg, " +"Antes de aumentar este parámetro más allá del valor por defecto de 90mm/s, " "asegúrese de que su impresora puede puentear de forma fiable a las " -"velocidades aumentadas y que el rezume al cambiar de herramienta está bien " +"velocidades aumentadas y que el rezume al cambiar de cabezal está bien " "controlado.\n" "\n" "Para los perímetros externos de la torre de purga se utiliza la velocidad " "del perímetro interno independientemente de este ajuste." -msgid "Wipe tower extruder" -msgstr "Extrusor de torre de purga" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" "Extrusor usado para imprimir el perímetro de la torre de purga. Ajuste a 0 " -"para usar el único disponible. (no soluble preferentemente)." +"para usar el único disponible (no soluble preferentemente)." msgid "Purging volumes - load/unload volumes" -msgstr "Volumenes de purga - carga/descarga de volúmenes" +msgstr "Volúmenes de purga - carga/descarga de volúmenes" msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" -"Este vector guarda los volúmenes necesarios para cambiar de/a cada " -"herramienta utilizada en la torre de purga. Estos valores se utilizan para " -"simplificar la creación de los volúmenes de purga completos a continuación." +"Este vector guarda los volúmenes necesarios para cambiar de/a cada cabezal " +"utilizado en la torre de purga. Estos valores se utilizan para simplificar " +"la creación de los volúmenes de purga completos a continuación." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -14058,8 +16838,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Este objeto se utilizará para purgar la boquilla después de un cambio de " "filamento para ahorrar filamento y disminuir el tiempo de impresión. Los " @@ -14071,16 +16851,49 @@ msgstr "Distancia máxima de puenteado" msgid "Maximal distance between supports on sparse infill sections." msgstr "" -"Distancia máxima entre los soportes en las sección de relleno de baja " +"Distancia máxima entre los soportes en las secciones de relleno de baja " "densidad." -msgid "X-Y hole compensation" -msgstr "Compensación de huecos X-Y" +msgid "Wipe tower purge lines spacing" +msgstr "Espaciado de las líneas de la torre de purga" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Espaciado de las líneas de purga de la torre de purga." + +msgid "Extra flow for purging" +msgstr "Caudal adicional para purgar" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Flujo extra utilizado para las líneas de purga en la torre de purga. Esto " +"hace que las líneas de purga sean más gruesas o más delgadas de lo normal. " +"La separación se ajusta automáticamente." + +msgid "Idle temperature" +msgstr "Temperatura de Espera" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Temperatura de la boquilla cuando el cabezal no se está utilizando en " +"configuraciones multicabezal. Este parámetro sólo es utilizado cuando la " +"'Prevención de rezumado' está activada en los ajustes de proceso. Póngalo a " +"0 para desactivarlo." + +msgid "X-Y hole compensation" +msgstr "Compensación en X-Y de huecos" + +#, fuzzy +msgid "" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Los huecos del objeto crecerán o se reducirán en el plano XY según el valor " "configurado. Un valor positivo hace que los huecos sean más grandes. Un " @@ -14089,13 +16902,14 @@ msgstr "" "de ensamblaje" msgid "X-Y contour compensation" -msgstr "Compensación de contornos X-Y" +msgstr "Compensación de contornos en X-Y" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "El contorno del objeto crecerá o se reducirá en el plano XY según el valor " "configurado. Un valor positivo hace que el contorno sea más grande. Un valor " @@ -14111,19 +16925,19 @@ msgid "" "compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" -"Busque orificios casi circulares que abarquen más de una capa y convierta la " -"geometría en poliorificios. Utilice el tamaño de la boquilla y el diámetro " -"(mayor) para calcular el poliorificio.\n" +"Orca buscará los orificios casi circulares que abarquen más de una capa y " +"convierte la geometría en poliorificios. Utiliza el tamaño de la boquilla y " +"el orificio de mayor diámetro para calcular el poliorificio.\n" "Véase http://hydraraptor.blogspot.com/2011/02/poliorificios.html" msgid "Polyhole detection margin" -msgstr "Margen de detección del poliorificio" +msgstr "Margen de detección de poliorificios" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -14137,54 +16951,51 @@ msgid "Polyhole twist" msgstr "Giro de poliorificio" msgid "Rotate the polyhole every layer." -msgstr "Rotar el poliorificio en todas las capas." +msgstr "Rotar el poliorificio en cada capa." msgid "G-code thumbnails" -msgstr "Tamaño de miniaturas de G-Code" +msgstr "Miniaturas de G-Code" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Los tamaños de las imágenes se almacenan en archivos .gcode y .sl1 / .sl1s, " -"en el siguiente formato: \"XxY, XxY, ...\"" +"Los tamaños de las imágenes para almacenar en archivos .gcode y .sl1 / ." +"sl1s, en el siguiente formato: \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" msgstr "Formato de las miniaturas de G-Code" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Formato de las miniaturas de G-Code: PNG para la mejor calidad, JPG para el " "tamaño más pequeño, QOI para firmware de baja memoria" msgid "Use relative E distances" -msgstr "Usar distancias relativas E" +msgstr "Usar distancias E relativas" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "Se recomienda la extrusión relativa cuando se utiliza la opción " "\"label_objects\". Algunos extrusores funcionan mejor con esta opción " -"desactivada (modo de extrusión absoluta). La torre de borrado sólo es " +"desactivada (modo de extrusión absoluta). La torre de purga sólo es " "compatible con el modo relativo. Se recomienda en la mayoría de las " -"impresoras. Por defecto está marcada" +"impresoras. Por defecto está activada" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" -"El generador de perímetros clásico produce perímetros con anchura de " -"extrusión constante y para zonas muy finas se utiliza rellenar-espacio. El " -"motor Arachne produce perímetros con anchura de extrusión variable." - -msgid "Classic" -msgstr "Clásico" +"El generador de perímetros clásico produce perímetros con ancho de extrusión " +"constante y para zonas muy finas se utiliza rellenar-espacio. El motor " +"Arachne produce perímetros con ancho de extrusión variable." msgid "Arachne" msgstr "Arachne" @@ -14195,11 +17006,11 @@ msgstr "Anchura de transición de perímetro" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" -"Cuando se pasa de un número de perímetros a otro a medida que la pieza se " -"vuelve más fina, se asigna una determinada cantidad de espacio para dividir " -"o unir los segmentos de perímetro. Se expresa como un porcentaje sobre el " +"Cuando se pasa de un número de perímetros a otro, a medida que la pieza se " +"vuelve más fina se asigna una determinada cantidad de espacio para dividir o " +"unir los segmentos de perímetro. Se expresa como un porcentaje sobre el " "diámetro de la boquilla" msgid "Wall transitioning filter margin" @@ -14212,7 +17023,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Evita la transición entre un perímetro de más y uno de menos. Este margen " "amplía el rango de anchos de extrusión que siguen a [Ancho mínimo de " @@ -14230,39 +17041,34 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Cuándo crear transiciones entre números pares e impares de perímetros. Una " "forma de cuña con un ángulo mayor que este ajuste no tendrá transiciones y " "no se imprimirán perímetros en el centro para rellenar el espacio restante. " "La reducción de este ajuste reduce el número y la longitud de estos " -"perímetros centrales, pero puede dejar huecos o sobresalir" +"perímetros centrales, pero puede dejar huecos o sobreextruir" msgid "Wall distribution count" msgstr "Recuento de la distribución del perímetro" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "El número de perímetros, contados desde el centro, sobre los que debe " "repartirse la variación. Los valores más bajos significan que los perímetros " -"exteriores no cambian de anchura" +"exteriores no cambian de ancho" msgid "Minimum feature size" -msgstr "Tamaño mínimo del elemento" +msgstr "Tamaño mínimo de la característica" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Espesor mínimo de los elementos finos. Las características del modelo que " -"sean más finas que este valor no se imprimirán, mientras que las " -"características más gruesas que el Tamaño mínimo del elemento se ensancharán " -"hasta el Ancho mínimo de perímetro. Se expresa en porcentaje sobre el " -"diámetro de la boquilla" msgid "Minimum wall length" msgstr "Longitud mínima de perímetro" @@ -14272,9 +17078,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Ajuste este valor para evitar que se impriman perímetros cortos y no " @@ -14283,11 +17089,11 @@ msgstr "" "\n" "NOTA: Las superficies inferior y superior no se verán afectadas por este " "valor para evitar huecos visuales en el exterior del modelo. Ajuste \"Umbral " -"de Perímetro\" en la configuración avanzada para ajustar la sensibilidad de " -"lo que se considera una superficie superior. El \"Umbral de un Solo " -"Perímetro\" sólo es visible si este valor es superior al valor " -"predeterminado de 0,5, o si las superficies superiores de un solo perímetro " -"están activados." +"para generar un solo perímetro\" en la configuración avanzada para ajustar " +"la sensibilidad de lo que se considera una superficie superior. El \"Umbral " +"para generar un solo perímetro\" sólo es visible si este valor es superior " +"al valor predeterminado de 0,5, o si las superficies superiores de un solo " +"perímetro están activados." msgid "First layer minimum wall width" msgstr "Ancho mínimo del perímetro de la primera capa" @@ -14308,21 +17114,21 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Anchura del perímetro que sustituirá a los elementos finos (según el tamaño " "mínimo del elemento) del modelo. Si la anchura mínima del perímetro es menor " "que el grosor de la característica, el perímetro será tan grueso como la " -"propia característica. Se expresa en porcentaje sobre el diámetro de la " +"propia característica. Se expresa en porcentaje en base al diámetro de la " "boquilla" msgid "Detect narrow internal solid infill" msgstr "Detección de relleno interno estrecho" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Esta opción detectará automáticamente el área de relleno sólido interno " "estrecho. Si se activa, se utilizará un patrón concéntrico para el área para " @@ -14336,34 +17142,156 @@ msgid "Invalid value when spiral vase mode is enabled: " msgstr "Valor no válido cuando está activado el modo jarrón espiral: " msgid "too large line width " -msgstr "demasiada anchura de línea " +msgstr "ancho de línea excesivo " msgid " not in range " msgstr " fuera de rango " +msgid "Export 3MF" +msgstr "Exportar 3MF" + +msgid "Export project as 3MF." +msgstr "Exportar el proyecto como 3MF." + +msgid "Export slicing data" +msgstr "Exportar datos de laminado" + +msgid "Export slicing data to a folder." +msgstr "Exportar datos de laminado a una carpeta." + +msgid "Load slicing data" +msgstr "Cargar datos de laminado" + +msgid "Load cached slicing data from directory." +msgstr "Cargar datos de laminado en caché desde el directorio" + +msgid "Export STL" +msgstr "Exportar STL" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "Laminar" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "" +"Cortar las bandejas: 0-todas las bandejas, i-bandeja i, otras-inválidas" + +msgid "Show command help." +msgstr "Mostrar la ayuda del comando." + +msgid "UpToDate" +msgstr "Actualizado" + +msgid "Update the config values of 3MF to latest." +msgstr "Actualice los valores de configuración de 3MF a la última versión." + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "Cargar los filamentos por defecto" + +msgid "Load first filament as default for those not loaded." +msgstr "Carga el primer filamento por defecto para los no cargados" + msgid "Minimum save" msgstr "Salvado mínimo" -msgid "export 3mf with minimum size." -msgstr "exportar 3mf con el tamaño mínimo." +msgid "Export 3MF with minimum size." +msgstr "Exportar 3MF con el tamaño mínimo." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "número máximo de triángulos por plato para laminar." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "tiempo máximo de corte por bandeja en segundos." msgid "No check" -msgstr "No comprobado" +msgstr "No comprobar" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "No ejecute ninguna comprobación de validez, como la comprobación de " "conflictos de ruta de G-Code." +msgid "Normative check" +msgstr "Comprobación de normativa" + +msgid "Check the normative items." +msgstr "Comprueba los elementos normativos." + +msgid "Output Model Info" +msgstr "Información del modelo de salida" + +msgid "Output the model's information." +msgstr "Salida de la información del modelo." + +msgid "Export Settings" +msgstr "Ajustes de exportación" + +msgid "Export settings to a file." +msgstr "Exporta los ajustes a un archivo." + +msgid "Send progress to pipe" +msgstr "Enviar el progreso a la tubería" + +msgid "Send progress to pipe." +msgstr "Enviar el progreso a la tubería." + +msgid "Arrange Options" +msgstr "Opciones de posicionamiento" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Opciones de posicionamiento: 0-desactivar, 1-activar, otras-auto" + +msgid "Repetition count" +msgstr "Cantidad de repeticiones" + +msgid "Repetition count of the whole model." +msgstr "Cantidad de repeticiones del modelo completo" + msgid "Ensure on bed" -msgstr "Asegurar en la cama" +msgstr "Auto-ajustar a la cama" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" -"Eleva el objeto sobre la cama cuando está parcialmente bajo. Deshabilitado " +"Eleva el objeto sobre la cama cuando está parcialmente debajo. Deshabilitado " "por defecto" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Organizar los modelos suministrados en una base y combinarlos en un solo " +"modelo para realizar acciones una vez." + +msgid "Convert Unit" +msgstr "Convertir Unidad" + +msgid "Convert the units of model." +msgstr "Convertir las unidades del modelo" + msgid "Orient Options" msgstr "Opciones de orientación" @@ -14373,12 +17301,83 @@ msgstr "Opciones de orientación: 0-deshabilitar. 1-habilitar. otros-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "El ángulo de rotación alrededor del eje Z en grados." +msgid "Rotate around X" +msgstr "Rotar alrededor de X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "El ángulo de rotación alrededor del eje X en grados." + msgid "Rotate around Y" msgstr "Rotar alrededor de Y" msgid "Rotation angle around the Y axis in degrees." msgstr "El ángulo de rotación alrededor del eje Y en grados." +msgid "Scale the model by a float factor." +msgstr "Escala el modelo por un factor de flotación" + +msgid "Load General Settings" +msgstr "Cargar los ajustes generales" + +msgid "Load process/machine settings from the specified file." +msgstr "Cargar los ajustes del proceso/máquina desde el archivo especificado" + +msgid "Load Filament Settings" +msgstr "Cargar los ajustes del filamento" + +msgid "Load filament settings from the specified file list." +msgstr "" +"Cargar los ajustes del filamento desde la lista de archivos especificada" + +msgid "Skip Objects" +msgstr "Omitir objetos" + +msgid "Skip some objects in this print." +msgstr "Omitir algunos objetos en esta impresión" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"carga los ajustes actualizados de proceso/máquina desde el archivo " +"especificado cuando se usa actualizar" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "Directorio de datos" @@ -14391,23 +17390,107 @@ msgstr "" "mantener diferentes perfiles o incluir configuraciones desde un " "almacenamiento en red." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Directorio de salida" + +msgid "Output directory for the exported files." +msgstr "Directorio de salida para los archivos exportados." + +msgid "Debug level" +msgstr "Nivel de depuración" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:advertencia, " +"3:información, 4:depuración, 5:rastreo\n" + +msgid "Enable timelapse for print" +msgstr "" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" + +msgid "Load custom G-code" msgstr "Cargar G-Code personalizado" -msgid "Load custom gcode from json" -msgstr "Cargar G-Code personalizado desde json" +msgid "Load custom G-code from json." +msgstr "Cargar G-Code personalizado desde json." -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" msgstr "Z-Hop actual" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" "Contiene el z-hop presente al principio del bloque de G-Code personalizado." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Posición del extrusor al comienzo del bloque de G-Code personalizado. Si el " "G-Code personalizado viaja a otro lugar, debe escribir en esta variable para " @@ -14416,19 +17499,27 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Estado de retracción al comienzo del bloque de G-Code personalizado. Si el G-" "Code personalizado mueve el eje del extrusor, debe escribir en esta variable " -"para que Snapmaker Orca se retraiga correctamente cuando recupere el control." +"para que Snapmaker Orca se de-retraiga correctamente cuando recupere el control." -msgid "Extra deretraction" -msgstr "Extra deretraction" +msgid "Extra de-retraction" +msgstr "De-retraction extra" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "Purgado adicional previsto del extrusor después de la deretracción." + +msgid "Absolute E position" +msgstr "Posición E absoluta" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" -"Actualmente está previsto un purgado adicional del extrusor después de la " -"desretracción." +"Posición actual del eje del extrusor. Sólo se utiliza con direccionamiento " +"absoluto del extrusor." msgid "Current extruder" msgstr "Extrusora actual" @@ -14460,7 +17551,7 @@ msgid "" "initial_tool." msgstr "" "Índice de base cero del primer extrusor utilizado en la impresión. Igual que " -"herramienta inicial." +"cabezal_inicial." msgid "Initial tool" msgstr "Herramienta inicial" @@ -14473,25 +17564,34 @@ msgstr "" "extrusor_inicial." msgid "Is extruder used?" -msgstr "¿Se utiliza extrusora?" +msgstr "¿Se utiliza el extrusor?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" -"Vector de bools que indica si un determinado extrusor se utiliza en la " +"Vector de buleanos que indica si un determinado extrusor se utiliza en la " "impresión." +msgid "Has single extruder MM priming" +msgstr "Parámetros de cambio de cabezal para impresoras de 1 extrusor MM" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"¿Se utilizan las regiones de imprimación multimaterial adicionales en esta " +"impresión?" + msgid "Volume per extruder" -msgstr "Volumen por extrusora" +msgstr "Volumen por extrusor" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" "Volumen total de filamento extruido por extrusor durante toda la impresión." -msgid "Total toolchanges" -msgstr "Total de cambios de herramientas" +msgid "Total tool changes" +msgstr "Total de cambios de cabezales" -msgid "Number of toolchanges during the print." -msgstr "Número de cambios de herramienta durante la impresión." +msgid "Number of tool changes during the print." +msgstr "Número de cambios de cabezal durante la impresión." msgid "Total volume" msgstr "Volumen total" @@ -14546,12 +17646,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Contiene una cadena con información sobre la escala aplicada a cada objeto. " "La indexación de los objetos se basa en cero (el primer objeto tiene índice " -"0). \n" -"Ejemplo: 'x:100% y:50% z:100'." +"0).\n" +"Ejemplo: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Nombre de archivo de entrada sin extensión" @@ -14560,12 +17660,12 @@ msgid "Source filename of the first object, without extension." msgstr "Nombre de archivo de origen del primer objeto, sin extensión." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "El vector tiene dos elementos: coordenada x e y del punto. Valores en mm." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "El vector tiene dos elementos: dimensión x e y de la caja delimitadora. " @@ -14606,7 +17706,7 @@ msgid "Timestamp" msgstr "Marca de tiempo" msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "Cadena que contiene la hora actual en formato aaaammdd-hhmmss." +msgstr "Cadena que contiene la hora actual en formato aaaaMMdd-hhmmss." msgid "Day" msgstr "Día" @@ -14617,11 +17717,14 @@ msgstr "Hora" msgid "Minute" msgstr "Minuto" +msgid "Second" +msgstr "Segundo" + msgid "Print preset name" msgstr "Imprimir nombre de perfil" msgid "Name of the print preset used for slicing." -msgstr "Nombre del perfil de impresión utilizado para el corte." +msgstr "Nombre del perfil de impresión utilizado para el laminado." msgid "Filament preset name" msgstr "Nombre del perfil de filamento" @@ -14645,6 +17748,16 @@ msgstr "Nombre físico de la impresora" msgid "Name of the physical printer used for slicing." msgstr "Nombre de la impresora física utilizada para el corte." +msgid "Number of extruders" +msgstr "Número de Cabezales" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Número total de extrusores, independientemente de si se utilizan en la " +"impresión actual." + msgid "Layer number" msgstr "Número de capa" @@ -14653,8 +17766,8 @@ msgstr "" "Índice de la capa actual. Basado en uno (es decir, la primera capa es la " "número 1)." -msgid "Layer z" -msgstr "Capa Z" +msgid "Layer Z" +msgstr "Z de capa" msgid "" "Height of the current layer above the print bed, measured to the top of the " @@ -14663,8 +17776,8 @@ msgstr "" "Altura de la capa actual sobre la cama de impresión, medida hasta la parte " "superior de la capa." -msgid "Maximal layer z" -msgstr "Capa máxima z" +msgid "Maximal layer Z" +msgstr "Z máxima de capa" msgid "Height of the last layer above the print bed." msgstr "Altura de la última capa sobre la cama de impresión." @@ -14690,9 +17803,6 @@ msgstr "Generación de la trayectoria de la herramienta de relleno" msgid "Detect overhangs for auto-lift" msgstr "Detección de voladizos para autoelevación" -msgid "Generating support" -msgstr "Generar soporte" - msgid "Checking support necessity" msgstr "Comprobación de la necesidad de soporte" @@ -14700,7 +17810,7 @@ msgid "floating regions" msgstr "regiones flotantes" msgid "floating cantilever" -msgstr "voladizo flotante" +msgstr "voladizos flotantes" msgid "large overhangs" msgstr "voladizos grandes" @@ -14711,13 +17821,16 @@ msgid "" "generation." msgstr "" "Parece que el objeto %s tiene %s. Por favor, reoriente el objeto o active la " -"generación de soporte." +"generación de soportes." + +msgid "Generating support" +msgstr "Generación de soportes" msgid "Optimizing toolpath" -msgstr "Optimización de la trayectoria de la herramienta" +msgstr "Optimización de la trayectoria de cabezal" msgid "Slicing mesh" -msgstr "Malla de corte" +msgstr "Laminando malla" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " @@ -14729,63 +17842,44 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "La compensación de tamaño XY de un objeto no se utilizará porque también " "está pintado en color.\n" "La compensación de tamaño XY no puede combinarse con el pintado en color." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Soporte: generar trayectoria en la capa %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Soporte: detectar voladizos" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" -msgstr "Soporte: generar puntos de contacto" +msgstr "Soporte: generando puntos de contacto" -msgid "Support: propagate branches" -msgstr "Soporte: propagación de ramas" +msgid "Loading of a model file failed." +msgstr "Error en la carga del fichero de modelo." -msgid "Support: draw polygons" -msgstr "Soporte: dibujar polígonos" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Soporte: herramienta de generación de trayectoria" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Soporte: generar polígonos en la capa %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Soporte: arreglar huecos en la capa %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Soporte: propagar ramas en la capa %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "El archivo proporcionado no puede ser leído debido a que está vacío" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" "Formato de archivo desconocido: el archivo de entrada debe tener extensión ." -"stl, .obj o .amf(.xml)." - -msgid "Loading of a model file failed." -msgstr "Error en la carga del fichero modelo." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "El archivo proporcionado no puede ser leído debido a que está vacío" +"STL, .obj o .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Formato de archivo desconocido: el archivo de entrada debe tener " "extensión .3mf o .zip.amf." -msgid "Canceled" -msgstr "Cancelado" - msgid "load_obj: failed to parse" msgstr "load_obj: fallo al parsear" @@ -14817,13 +17911,13 @@ msgid "Manual Calibration" msgstr "Calibración Manual" msgid "Result can be read by human eyes." -msgstr "El resultado puede leerse con ojos humanos." +msgstr "El resultado puede ser leído por humanos." msgid "Auto-Calibration" msgstr "Auto-Calibración" msgid "We would use Lidar to read the calibration result" -msgstr "Deberíamos usar Lidar para leer resultados de calibración" +msgstr "Se usará el Lidar para leer los resultados de calibración" msgid "Prev" msgstr "Ant" @@ -14842,7 +17936,7 @@ msgstr "¿Cómo usar el resultado de la calibración?" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "Deberías cambiar el Factor de Calibración de Dinámicas de Flujo" +msgstr "Podrías cambiar el Factor de Calibración de Dinámicas de Flujo" msgid "" "The current firmware version of the printer does not support calibration.\n" @@ -14875,29 +17969,37 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Por favor, introduzca valores válidos:\n" "Valor inicial: >= %.1f\n" "Valor final <= %.1f\n" "Valor final: > Valor inicial\n" -"Valor de paso: >= %.3f)" +"Valor de incremento: >= %.3f" msgid "The name cannot be empty." msgstr "El nombre no puede estar vacío." #, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "El perfil seleccionado: %s no encontrado." +msgid "The selected preset: %s was not found." +msgstr "El perfil seleccionado: %s no ha sido encontrado." msgid "The name cannot be the same as the system preset name." -msgstr "El nombre no puede ser el mismo que el nombre de perfil del sistema." +msgstr "El nombre no puede ser el mismo que un nombre de perfil del sistema." msgid "The name is the same as another existing preset name" msgstr "El nombre coincide con el de otro perfil" msgid "create new preset failed." -msgstr "crear un nuevo perfil fallido." +msgstr "la creación un nuevo perfil ha fallado." + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" @@ -14921,25 +18023,19 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" +"Esta impresora sólo puede almacenar 16 registros por boquilla. Puede borrar " +"registros existentes y después comenzar la calibración. También puede elegir " +"continuar con la calibración, pero no podrá guardar los registros.\n" +"¿Desea continuar con la calibración?" -msgid "Connecting to printer..." -msgstr "Conectando a la impresora." - -msgid "The failed test result has been dropped." -msgstr "El resultado del test fallido se ha descartado." - -msgid "Flow Dynamics Calibration result has been saved to the printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" msgstr "" -"El resultado de la Calibración de Dinámicas de Flujo se ha salvado en la " -"impresora" #, c-format, boost-format msgid "" @@ -14951,6 +18047,13 @@ msgstr "" "se guarda un resultado con un nombre. Está seguro de que desea sobrescribir " "el resultado anterior?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14959,21 +18062,31 @@ msgstr "" "Este tipo de máquina sólo puede guardar %d resultados históricos por " "boquilla. Este resultado no se guardará." +msgid "Connecting to printer..." +msgstr "Conectando a la impresora..." + +msgid "The failed test result has been dropped." +msgstr "El resultado del test fallido ha sido descartado." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" +"El resultado de la Calibración de Dinámicas de Flujo se ha guardado en la " +"impresora" + msgid "Internal Error" msgstr "Error interno" msgid "Please select at least one filament for calibration" msgstr "Por favor, selecciona al menos un filamento por calibración" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" -"El resultado de la calibración del ratio de flujo se ha guardado en los " -"perfiles" +"El resultado de la calibración del ratio de flujo se ha guardado en el perfil" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "El resultado de la calibración de velocidad volumétrica máxima se ha salvado " -"en los perfiles" +"en el perfil" msgid "When do you need Flow Dynamics Calibration" msgstr "Cuando necesita la Calibración de Dinámicas de Flujo" @@ -14984,19 +18097,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Hemos añadido la auto-calibración para diferentes filamentos, los cuales " -"están totalmente automatizados, y los resultados se guardarán en la " -"impresora para futuros usos. Solo necesita calibrar en los siguientes " -"casos:\n" -"1. Sí introduce un nuevo filamento, o de diferentes marcas/modelos, o el " -"filamento está húmedo; \n" -"2. Sí la boquilla está desgastada o se sustituye por otra nueva;\n" -"3. Si la velocidad volumétrica máxima o la temperatura de impresión se " -"cambia en los ajustes de filamento." msgid "About this calibration" msgstr "Acerca de la calibración" @@ -15055,12 +18159,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Después de usar la Calibración de Dinámicas de Flujo, puede haber algunos " "Después de usar la Calibración de Dinámicas de Flujo, puede haber algunos " @@ -15151,7 +18255,7 @@ msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "Material con importante contracción/expansión térmica, como..." msgid "materials with inaccurate filament diameter" -msgstr "Materiales con diámetro de filamento inpreciso" +msgstr "Materiales con diámetro de filamento impreciso" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Hemos encontrado el mejor Factor de Calibración de Dinámicas de Flujo" @@ -15170,22 +18274,12 @@ msgstr "" "*Recomendamos añadir marca, material, tipo, e incluso nivel de humedad en el " "Nombre" -msgid "Failed" -msgstr "Error" - msgid "Please enter the name you want to save to printer." msgstr "Por favor, introduzca el nombre que quiera asignar a la impresora." msgid "The name cannot exceed 40 characters." msgstr "El nombre no puede exceder de 40 caracteres." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Sólo se guardará uno de los resultados con el mismo nombre. ¿Está seguro de " -"que desea reemplazar los otros resultados?" - msgid "Please find the best line on your plate" msgstr "Por favor encuentre la mejor línea en su bandeja" @@ -15198,9 +18292,6 @@ msgstr "Valor de entrada" msgid "Save to Filament Preset" msgstr "Guardar Perfil de Filamento" -msgid "Preset" -msgstr "Perfil" - msgid "Record Factor" msgstr "Factor de guardado" @@ -15236,9 +18327,6 @@ msgstr "Saltar Calibración2" msgid "flow ratio : %s " msgstr "Ratio de flujo: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Por favor, escoja un bloque con la superficie superior más lisa" - msgid "Please choose a block with smoothest top surface." msgstr "Por favor, escoja un bloque con la superficie superior más lisa." @@ -15263,28 +18351,43 @@ msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"Se imprimirá n modelo de test. Por favor limpie la bandeja y póngala de " +"Se imprimirá un modelo de prueba. Por favor limpie la bandeja y póngala de " "nuevo en la cama caliente antes de calibrar." msgid "Printing Parameters" msgstr "Parámetros de Impresión" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Tipo de Bandeja" msgid "filament position" msgstr "Posición de filamento" -msgid "External Spool" -msgstr "Bobina Externa" - msgid "Filament For Calibration" msgstr "Filamento para Calibrar" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Consejos para la calibración del material:\n" "- Los materiales que pueden tener la misma temperatura de cama\n" @@ -15306,9 +18409,23 @@ msgstr "" "El filamento TPU no está soportado para la Auto-Calibración de Dinámicas de " "Flujo." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Conectando a la impresora" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Desde el valor k" @@ -15316,7 +18433,7 @@ msgid "To k Value" msgstr "Al valor k" msgid "Step value" -msgstr "Valor del paso" +msgstr "Valor de incremento" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "" @@ -15329,6 +18446,9 @@ msgstr "Desde Velocidad Volumétrica" msgid "To Volumetric Speed" msgstr "A Velocidad Volúmetrica" +msgid "Are you sure you want to cancel this print?" +msgstr "¿Está seguro que desea cancelar esta impresión?" + msgid "Flow Dynamics Calibration Result" msgstr "Resultado de Calibración de Dinámicas de Flujo" @@ -15357,6 +18477,13 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Editar Calibración de Dinámicas de Flujo" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "Nueva Calibración Dinámica del Flujo" @@ -15366,6 +18493,12 @@ msgstr "Ok" msgid "The filament must be selected." msgstr "Debe seleccionar el filamento." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Búsqueda de red" @@ -15401,15 +18534,12 @@ msgstr "" msgid "PA Calibration" msgstr "Calibración PA" -msgid "DDE" -msgstr "DDE" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Tipo de extrusor" +msgid "DDE" +msgstr "DDE" + msgid "PA Tower" msgstr "Torre PA" @@ -15420,31 +18550,52 @@ msgid "PA Pattern" msgstr "Modelo PA" msgid "Start PA: " -msgstr "Iniciar PA: " +msgstr "PA inicial: " msgid "End PA: " -msgstr "Finalizar PA: " +msgstr "PA final: " msgid "PA step: " -msgstr "Paso PA: " +msgstr "Incremento de PA: " + +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" msgid "Print numbers" msgstr "Imprimir números" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Por favor, introduzca valores válidos:\n" -"Iniciar PA: >=0.0\n" -"Finalizar PA:> Iniciar PA\n" -"Paso PA:>=0.001)" +"PA inicial: >=0.0\n" +"PA final:> Iniciar PA\n" +"Incremento de PA:>=0.001" msgid "Temperature calibration" msgstr "Calibración de temperatura" +msgid "Filament type" +msgstr "Tipo de filamento" + msgid "PLA" msgstr "PLA" @@ -15455,7 +18606,7 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" msgstr "TPU" @@ -15466,9 +18617,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Tipo de filamento" - msgid "Start temp: " msgstr "Temperatura inicial: " @@ -15476,18 +18624,17 @@ msgid "End temp: " msgstr "Temperatura final: " msgid "Temp step: " -msgstr "Paso temperatura: " +msgstr "Incremento temperatura: " + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Por favor, introduzca valores válidos:\n" -"Temp inicial: <= 350\n" -"Temp final: >=170\n" -"Temp inicial > Temp final + 5)" msgid "Max volumetric speed test" msgstr "Test de velocidad volumétrica máxima" @@ -15498,19 +18645,19 @@ msgstr "Velocidad volumétrica inicial: " msgid "End volumetric speed: " msgstr "Velocidad volumétrica final: " -msgid "step: " -msgstr "Paso: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Por favor, introduzca valores válidos:\n" "inicio > 0\n" -"paso >=0\n" -"final > inicio + paso)" +"incremento >=0\n" +"final > inicio + paso" msgid "VFA test" msgstr "Test VFA" @@ -15521,31 +18668,155 @@ msgstr "Velocidad inicial: " msgid "End speed: " msgstr "Velocidad final: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Por favor, introduzca valores válidos:\n" "inicio > 10\n" -"paso >=0\n" -"final > inicio + paso)" +"incremento >=0\n" +"final > inicio + paso" msgid "Start retraction length: " -msgstr "Longitud de retracción inicial:" +msgstr "Longitud de retracción inicial: " msgid "End retraction length: " -msgstr "Longitud de retracción final:" +msgstr "Longitud de retracción final: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Enviar G-Code al host de impresión" msgid "Upload to Printer Host with the following filename:" -msgstr "Subido al Host de Impresión con el siguiente nombre de archivo:" +msgstr "Subir al Host de Impresión con el siguiente nombre de archivo:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "Use barras oblicuas como separador de directorio si es necesario." @@ -15565,7 +18836,7 @@ msgid "Upload" msgstr "Cargar" msgid "Print host upload queue" -msgstr "Imprimir cola de carga del host" +msgstr "Cola de carga del host de impresión" msgid "ID" msgstr "ID" @@ -15589,24 +18860,40 @@ msgstr "Cancelar selección" msgid "Show error message" msgstr "Mostrar mensaje de error" -msgid "Enqueued" +msgid "Queued" msgstr "En cola" msgid "Uploading" msgstr "Subiendo" -msgid "Cancelling" +msgid "Canceling" msgstr "Cancelado" msgid "Error uploading to print host" msgstr "Error al subir al host de impresión" -msgid "Unable to perform boolean operation on selected parts" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." msgstr "" -"No es posible realizar la operación booleana en las partes selecionadas" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + +msgid "Unable to perform boolean operation on selected parts" +msgstr "No es posible realizar la operación buleana en las partes selecionadas" msgid "Mesh Boolean" -msgstr "Malla Booleana" +msgstr "Operación buleana de malla" msgid "Union" msgstr "Unión" @@ -15639,7 +18926,7 @@ msgid "Part 2" msgstr "Parte 2" msgid "Delete input" -msgstr "Borrado de entrada" +msgstr "Borrar original" msgid "Network Test" msgstr "Prueba de Red" @@ -15662,14 +18949,14 @@ msgstr "Versión de Sistema:" msgid "DNS Server:" msgstr "Servidor DNS:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Prueba Snapmaker Orca(GitHub)" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Prueba Snapmaker Orca(GitHub):" -msgid "Test Bing.com" -msgstr "Prueba Bing.com" +msgid "Test bing.com" +msgstr "Prueba bing.com" msgid "Test bing.com:" msgstr "Prueba Bing,.com:" @@ -15702,7 +18989,7 @@ msgid "Select Vendor" msgstr "Seleccionar Fabricante" msgid "Input Custom Vendor" -msgstr "Introducor Fabricante Personalizado" +msgstr "Introducir Fabricante Personalizado" msgid "Can't find vendor I want" msgstr "No es posible encontrar el fabricante que deseamos" @@ -15727,14 +19014,14 @@ msgstr "Crear" msgid "Vendor is not selected, please reselect vendor." msgstr "" -"El fabricante no ha sido seleccionado, por favor, seleccione otro fabricante." +"El fabricante no ha sido seleccionado, por favor, seleccione el fabricante." msgid "Custom vendor is not input, please input custom vendor." msgstr "" -"El fabricante personalizado no ha sido introducido, vuelva a seleccionarlo." +"El fabricante personalizado no ha sido introducido, por favor introdúzcalo." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" o \"Genérico\" no pueden ser usados como Fabricante para " "filamentos personalizados." @@ -15742,7 +19029,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "No se ha seleccionado el tipo de filamento, vuelva a seleccionarlo." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "" "No se ha seleccionado el número de serie de filamento, vuelva a " "seleccionarlo." @@ -15759,7 +19046,7 @@ msgstr "" "Todas las entradas en el fabricante personalizado o serie son espacios. " "Vuelva a introducirlos." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "El fabricante no puede ser un número. Vuelva a introducirlos." msgid "" @@ -15770,11 +19057,11 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"El nombre del filamento %s que ha creado ya existe. \n" +"El nombre del filamento %s que ha creado ya existe.\n" "Si continúa, el perfil creado se mostrará con su nombre completo. ¿Desea " "continuar?" @@ -15792,11 +19079,11 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Cambiaremos el nombre de los perfiles a \"Tipo Número de Serie @impresora " -"seleccionados\". \n" +"seleccionados\".\n" "Para añadir perfiles para más impresoras, vaya a la selección de impresoras" msgid "Create Printer/Nozzle" @@ -15820,21 +19107,27 @@ msgstr "Importar Perfil" msgid "Create Type" msgstr "Crear Tipo" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "No se encuentra el modelo, vuelva a seleccionar fabricante." -msgid "Select Model" -msgstr "Seleccionar Modelo" - msgid "Select Printer" msgstr "Seleccionar Impresora" +msgid "Select Model" +msgstr "Seleccionar Modelo" + msgid "Input Custom Model" msgstr "Introducir Modelo Personalizado" msgid "Can't find my printer model" msgstr "No se puede encontrar el modelo de la impresora" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Rectángulo" @@ -15842,16 +19135,10 @@ msgid "Printable Space" msgstr "Espacio Imprimible" msgid "Hot Bed STL" -msgstr "Cama Caliente STL" - -msgid "Load stl" -msgstr "Cargar stl" +msgstr "STL de Cama Caliente" msgid "Hot Bed SVG" -msgstr "Cama Caliente SVG" - -msgid "Load svg" -msgstr "Cargar svg" +msgstr "SVG de Cama Caliente" msgid "Max Print Height" msgstr "Altura Máxima de Impresión" @@ -15865,20 +19152,21 @@ msgstr "" "Se ha producido una excepción obteniendo el tamaño de archivo, por favor, " "impórtelo de nuevo." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" -"No se encuentra la ruta preestablecida, vuelva a seleccionar el fabricante." +"No se encuentra la ruta del perfil, vuelva a seleccionar el fabricante." msgid "The printer model was not found, please reselect." msgstr "No se ha encontrado el modelo de impresora, vuelva a seleccionarlo." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "" -"El diámetro de la boquilla no es adecuado, vuelva a seleccionar el lugar." +"El diámetro de la boquilla no se ha encontrado, vuelva a seleccionarlo." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "" -"El perfil de impresora se ha encontrado, por favor, vuelva a seleccionarlo." +"El perfil de impresora no se ha encontrado, por favor, vuelva a " +"seleccionarlo." msgid "Printer Preset" msgstr "Perfil de Impresora" @@ -15892,15 +19180,12 @@ msgstr "Deseleccionar Todo" msgid "Process Preset Template" msgstr "Plantilla de Perfil de Proceso" -msgid "Back Page 1" -msgstr "Volver a la Página 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Aún no ha elegido el perfil de impresora que desea crear. Por favor, elija " -"el fabricante y el modelo de la impresora" +"Aún no ha elegido el perfil base de la impresora que desea crear. Por favor, " +"elija el fabricante y el modelo de la impresora" msgid "" "You have entered an illegal input in the printable area section on the first " @@ -15909,11 +19194,6 @@ msgstr "" "Ha introducido una entrada ilegal en la sección de área imprimible de la " "primera página. Por favor, compruébelo antes de crearla." -msgid "The custom printer or model is not inputed, place input." -msgstr "" -"No se ha introducido la impresora personalizada o el modelo, por favor, " -"introdúzcalo." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15938,19 +19218,19 @@ msgid "You need to select at least one process preset." msgstr "Necesita seleccionar al menos un perfil de proceso." msgid "Create filament presets failed. As follows:\n" -msgstr "Fallo crenado perfiles de filamento de la siguiente manera:\n" +msgstr "Fallo creando perfiles de filamento:\n" msgid "Create process presets failed. As follows:\n" -msgstr "Fallo crenado perfiles de proceso de la siguiente manera:\n" +msgstr "Fallo crenado perfiles de proceso:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Fabricante no encontrado, por favor seleccione uno." msgid "Current vendor has no models, please reselect." msgstr "El fabricante actual no tiene modelos, seleccionar otro." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "No ha seleccionado el fabricante y el modelo o no ha introducido el " @@ -15979,10 +19259,18 @@ msgstr "" "Todavía no ha seleccionado impresora para sustituir la boquilla, por favor, " "selecciónela." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Éxito Creando la Impresora" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Éxito Creando el Filamento" msgid "Printer Created" @@ -16000,8 +19288,8 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Por favor, vaya a la configuración de filamento para editar sus ajustes " -"perfiles si es necesario.\n" +"Por favor, vaya a la configuración de filamento para editar sus perfiles si " +"es necesario.\n" "Tenga en cuenta que la temperatura de la boquilla, la temperatura de la cama " "caliente y la velocidad volumétrica máxima tienen un impacto significativo " "en la calidad de impresión. Por favor, configúrelos con cuidado." @@ -16011,7 +19299,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" @@ -16070,20 +19358,27 @@ msgstr "" "Si no es así, se añadirá un sufijo de tiempo y podrá modificar el nombre " "después de la creación." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Impresora y todos los perfiles de filamento y proceso que pertenecen a la " -"impresora. \n" +"impresora.\n" "Se puede compartir con otros." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Conjunto de perfiles de relleno del usuario. \n" -"Se puede compartir con otros." +"Conjunto de perfiles de filamento del usuario.\n" +"Se pueden compartir con otros." msgid "" "Only display printer names with changes to printer, filament, and process " @@ -16095,7 +19390,7 @@ msgstr "" msgid "Only display the filament names with changes to filament presets." msgstr "" "Mostrar sólo los nombres de impresora con cambios en los perfiles de " -"impresora, filamento y proceso." +"filamento." msgid "" "Only printer names with user printer presets will be displayed, and each " @@ -16130,23 +19425,25 @@ msgid "Please select a type you want to export" msgstr "Seleccione el tipo que desea exportar" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" +"Error creando un directorio temporal. Por favor, vuelva a intentar la " +"operación de exportado de configuración." msgid "Edit Filament" msgstr "Editar Filamento" msgid "Filament presets under this filament" -msgstr "Perfiles de filamento bajo este filamento" +msgstr "Perfiles de filamento basados en este filamento" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Nota: Si el único perfil bajo este filamento es borrado, el filamento se " -"borrará después de salir del diálogo." +"Nota: Si el único perfil basado en este filamento es borrado, el filamento " +"se borrará después de salir del diálogo." -msgid "Presets inherited by other presets can not be deleted" -msgstr "Los perfiles heredados de otros perfiles no pueden borrarse" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "Los perfiles heredados por otros perfiles no pueden borrarse" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." @@ -16156,6 +19453,15 @@ msgstr[1] "Los siguientes perfiles heredan de este perfil." msgid "Delete Preset" msgstr "Borrar Perfil" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"¿Está seguro de que desea eliminar el perfil seleccionado?\n" +"Si el perfil corresponde a un filamento actualmente en uso en su impresora, " +"restablezca la información del filamento para esa ranura." + msgid "Are you sure to delete the selected preset?" msgstr "¿Está seguro de borrar el perfil seleccionado?" @@ -16165,16 +19471,13 @@ msgstr "Borrar perfil" msgid "+ Add Preset" msgstr "+ Añadir Perfil" -msgid "Delete Filament" -msgstr "Borrar Filamento" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Se eliminarán todos los perfiles de filamento que pertenezcan a este " -"filamento. \n" +"filamento.\n" "Si está utilizando este filamento en su impresora, restablezca la " "información del filamento para esa ranura." @@ -16209,56 +19512,99 @@ msgid "Daily Tips" msgstr "Consejos Diarios" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "boquilla memorizada: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"¿El diámetro de la boquilla en su configuración no corresponde con el " -"diámetro memorizado? ¿Hizo un cambio de boquilla?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*El material de impresión %s con %s podría causar daños en la boquilla" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Necesario seleccionar impresora" msgid "The start, end or step is not valid value." -msgstr "El inicio, el final o el paso no tienen un valor válido." +msgstr "El inicio, el final o el incremento no tienen un valor válido." + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" "No es posible calibrar debido a que el valor del rango de calibración es muy " -"grande, o el paso es muy pequeño" +"grande, o el incremento es muy pequeño" msgid "Physical Printer" msgstr "Impresora física" msgid "Print Host upload" -msgstr "Carga de Host de Impresión" +msgstr "Carga al Host de Impresión" msgid "Could not get a valid Printer Host reference" msgstr "No se ha podido obtener una referencia de host de impresora válida" msgid "Success!" -msgstr "¡Exitoso!" +msgstr "¡Éxito!" msgid "Are you sure to log out?" msgstr "¿Estás seguro de cerrar la sesión?" -msgid "Refresh Printers" -msgstr "Refrescar Impresoras" - msgid "View print host webui in Device tab" -msgstr "Ver el host de impresión webui en la pestaña Dispositivo" +msgstr "Ver la interfaz web del host de impresión en la pestaña Dispositivo" msgid "Replace the BambuLab's device tab with print host webui" -msgstr "Sustituir la pestaña de dispositivos de BambuLab por print host webui" +msgstr "" +"Sustituir la pestaña de dispositivos de BambuLab por la interfaz web del " +"host de impresión" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" @@ -16301,22 +19647,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Tipo de host de impresión no coincidente: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "La conexión a AstroBox funciona correctamente." msgid "Could not connect to AstroBox" msgstr "No se ha podido conectar con AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Nota: Se requiere la versión 1.1.0 de AstroBox como mínimo." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "La conexión con Duet funciona correctamente." msgid "Could not connect to Duet" msgstr "No se puede conectar a Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Se ha producido un error desconocido" msgid "Wrong password" @@ -16328,7 +19674,7 @@ msgstr "No se han podido obtener recursos para crear una nueva conexión" msgid "Upload not enabled on FlashAir card." msgstr "La carga no está activada en la tarjeta FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" "La conexión a FlashAir funciona correctamente y la carga está activada." @@ -16342,28 +19688,28 @@ msgstr "" "Nota: Se requiere FlashAir con firmware 2.00.02 o más reciente y función de " "carga activada." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "La conexión con MKS funciona correctamente." msgid "Could not connect to MKS" msgstr "No se ha podido conectar con MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "La conexión con OctoPrint funciona correctamente." msgid "Could not connect to OctoPrint" msgstr "No se ha podido conectar con OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Nota: Se requiere una versión de OctoPrint al menos 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "La conexión a Prusa SL1 / SL1S funciona correctamente." msgid "Could not connect to Prusa SLA" msgstr "No se ha podido conectar con Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "La conexión a PrusaLink funciona correctamente." msgid "Could not connect to PrusaLink" @@ -16388,19 +19734,19 @@ msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" "La carga ha fallado. No se ha encontrado almacenamiento adecuado en %1%." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "La conexión a Prusa Connect funciona correctamente." msgid "Could not connect to Prusa Connect" msgstr "No se pudo conectar a Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "La conexión con Repetier funciona correctamente." msgid "Could not connect to Repetier" msgstr "No se ha podido conectar con Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Nota: Se requiere la versión 0.90.0 de Repetier como mínimo." #, boost-format @@ -16417,7 +19763,7 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Falló el análisis de la respuesta del host. \n" +"Falló el análisis de la respuesta del host.\n" "Cuerpo del mensaje: \"%1%\" \n" "Error: \"%2%\"" @@ -16427,13 +19773,13 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Fallo en la enumeración de impresoras host. \n" +"Fallo en la enumeración de impresoras host.\n" "Cuerpo del mensaje: \"%1%\" \n" "Error: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Tiene una altura de capa pequeña, y da como resultado unas líneas de capa " "casi inapreciables y una alta calidad de impresión. Es adecuado para la " @@ -16441,18 +19787,18 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,2 mm, tiene " "velocidades y aceleraciones más bajas, y el patrón de relleno de baja " -"densidad es Gyroide. Esto da como resultado una calidad de impresión mucho " +"densidad es Giroide. Esto da como resultado una calidad de impresión mucho " "mayor, pero un tiempo de impresión mucho más largo." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "Comparado con el perfil por defecto de una boquilla de 0,2 mm, tiene una " "altura de capa ligeramente mayor, y da como resultado líneas de capa casi " @@ -16460,8 +19806,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,2 mm, tiene " "una mayor altura de capa. Esto se traduce en líneas de capa ligeramente " @@ -16469,18 +19814,15 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"En comparación con el perfil predeterminado de una boquilla de 0,2 mm, tiene " -"una altura de capa menor. Esto da como resultado líneas de capa casi " -"invisibles y una mayor calidad de impresión, pero un tiempo de impresión más " msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,2 mm, tiene " "unas líneas de capa más pequeñas, velocidades y aceleraciones más bajas, y " @@ -16489,19 +19831,16 @@ msgstr "" "un tiempo de impresión mucho más largo." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"En comparación con el perfil predeterminado de boquilla de 0,2 mm, tiene una " -"altura de capa menor, y da como resultado líneas de capa mínimas y una mayor " -"calidad de impresión, pero un tiempo de impresión más corto." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,2 mm, tiene " "unas líneas de capa más pequeñas, velocidades y aceleraciones más bajas, y " @@ -16510,8 +19849,8 @@ msgstr "" "pero un tiempo de impresión mucho más largo." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Tiene una altura de capa normal, y da como resultado unas líneas de capa y " "una calidad de impresión medias. Es adecuado para la mayoría de los casos de " @@ -16519,8 +19858,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "más perímetros y un mayor relleno de baja densidad. Esto se traduce en una " @@ -16529,8 +19868,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una mayor altura de capa. Esto da lugar a líneas de capa más visibles y a " @@ -16539,8 +19878,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una mayor altura de capa, y da como resultado líneas de capa más visibles y " @@ -16548,8 +19887,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una altura de capa menor. Esto se traduce en menos líneas de capa visibles y " @@ -16558,8 +19897,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una altura de capa menor, velocidades y aceleraciones más bajas, y el patrón " @@ -16569,8 +19908,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una altura de capa menor. Esto se traduce en unas líneas de capa casi " @@ -16580,8 +19919,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una altura de capa menor, velocidades y aceleraciones más bajas, y el patrón " @@ -16591,24 +19930,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,4 mm, tiene " "una altura de capa menor. Esto se traduce en unas líneas de capa casi " "inapreciables y un mayor tiempo de impresión." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Tiene una gran altura de capa, y da lugar a líneas de capa visibles y a una " "calidad y tiempo de impresión ordinarios." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,6 mm, tiene " "más bucles de perímetro y una mayor relleno de baja densidad. Esto se " @@ -16617,8 +19955,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,6 mm, tiene " "una mayor altura de capa. Esto da lugar a líneas de capa más visibles y a " @@ -16627,8 +19965,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,6 mm, tiene " "una mayor altura de capa. Esto da lugar a líneas de capa mucho más visibles " @@ -16637,8 +19975,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,6 mm, tiene " "una altura de capa menor. Esto se traduce en menos líneas de capa visibles y " @@ -16647,45 +19985,34 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,6 mm, tiene " "una altura de capa menor, y da como resultado líneas de capa menos visibles " "y una mayor calidad de impresión, pero un tiempo de impresión más largo." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Tiene una altura de capa muy grande, y da lugar a líneas de capa muy " -"visibles, baja calidad de impresión y menor tiempo de impresión." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"En comparación con el perfil predeterminado de una boquilla de 0,8 mm, tiene " -"una mayor altura de capa. Esto da lugar a líneas de capa muy visibles y a " -"una calidad de impresión mucho menor, pero un tiempo de impresión más corto " -"en algunos casos." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"En comparación con el perfil predeterminado de una boquilla de 0,8 mm, tiene " -"una altura de capa mucho mayor. Esto da lugar a líneas de capa " -"extremadamente visibles y a una calidad de impresión mucho menor, pero un " -"tiempo de impresión mucho más corto en algunos casos." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "En comparación con el perfil predeterminado de una boquilla de 0,8 mm, tiene " "una altura de capa ligeramente menor. Esto se traduce en líneas de capa " @@ -16694,13 +20021,319 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Sin AMS" + +msgid "There is no device available to send printing." +msgstr "No hay ningún dispositivo disponible para enviar impresiones." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "El número de impresoras en uso simultáneamente no puede ser igual a 0." + +msgid "Use External Spool" +msgstr "Utilizar carrete externo" + +msgid "Select Printers" +msgstr "Seleccionar impresoras" + +msgid "Device Name" +msgstr "Nombre del dispositivo" + +msgid "Device Status" +msgstr "Estado del dispositivo" + +msgid "AMS Status" +msgstr "Estado del AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Seleccione aquí los dispositivos que desea gestionar (hasta 6 dispositivos)" + +msgid "Printing Options" +msgstr "Opciones de impresión" + +msgid "Bed Leveling" +msgstr "Nivelación de la cama" + +msgid "Flow Dynamic Calibration" +msgstr "Calibración Dinámica de Flujo" + +msgid "Send Options" +msgstr "Opciones de envío" + +msgid "Send to" +msgstr "Mandar a" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"impresoras al mismo tiempo.(Depende de cuántos aparatos puedan calentarse al " +"mismo tiempo)." + +msgid "Wait" +msgstr "Espere" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "minuto por tanda. (Depende de lo que tarde en terminar de calentarse)." + +msgid "Task Sending" +msgstr "Envíando tarea" + +msgid "Task Sent" +msgstr "Tarea enviada" + +msgid "Edit multiple printers" +msgstr "Editar varias impresoras" + +msgid "Select connected printers (0/6)" +msgstr "Seleccionar impresoras conectadas (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Seleccionar Impresoras Conectadas (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "El número máximo de impresoras que se pueden seleccionar es %d" + +msgid "No task" +msgstr "Sin tareas" + +msgid "Edit Printers" +msgstr "Editar Impresoras" + +msgid "Task Name" +msgstr "Nombre de la tarea" + +msgid "Actions" +msgstr "Acciones" + +msgid "Task Status" +msgstr "Estado de la tarea" + +msgid "Sent Time" +msgstr "Hora de envío" + +msgid "There are no tasks to be sent!" +msgstr "No hay tareas que enviar." + +msgid "No historical tasks!" +msgstr "Sin tareas históricas" + +msgid "Upgrading" +msgstr "Actualizando" + +msgid "syncing" +msgstr "Sincronizando" + +msgid "Printing Finish" +msgstr "Impresión Finalizada" + +msgid "Printing Failed" +msgstr "Impresión fallida" + +msgid "Printing Pause" +msgstr "Impresión Pausada" + +msgid "Pending" +msgstr "Pendiente" + +msgid "Sending" +msgstr "Enviando" + +msgid "Sending Finish" +msgstr "Envío Finalizado" + +msgid "Sending Cancel" +msgstr "Envío Cancelado" + +msgid "Sending Failed" +msgstr "Envío Fallido" + +msgid "Print Success" +msgstr "Impresión Exitosa" + +msgid "Print Failed" +msgstr "Error de Impresión" + +msgid "Removed" +msgstr "Eliminado" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"En comparación con el perfil predeterminado de una boquilla de 0,8 mm, tiene " -"una altura de capa menor. Esto se traduce en menos líneas de capa, aunque " -"visibles, y en una calidad de impresión ligeramente superior, pero con un " -"tiempo de impresión más largo en algunos casos." msgid "Connected to Obico successfully!" msgstr "¡Conectado a Obico con éxito!" @@ -16725,11 +20358,11 @@ msgstr "" "La cuenta SimplyPrint no está vinculada. Vaya a Opciones de conexión para " "configurarla." -msgid "Connection to Flashforge works correctly." -msgstr "La conexión con Flashforge funciona correctamente." +msgid "Serial connection to Flashforge is working correctly." +msgstr "" -msgid "Could not connect to Flashforge" -msgstr "No se ha podido conectar a Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "" msgid "The provided state is not correct." msgstr "El estado proporcionado no es correcto." @@ -16742,8 +20375,111 @@ msgid "Something unexpected happened when trying to log in, please try again." msgstr "" "Ha ocurrido algo inesperado al intentar iniciar sesión, inténtelo de nuevo." -msgid "User cancelled." -msgstr "Cancelador por el usuario." +msgid "User canceled." +msgstr "Cancelado por el usuario." + +msgid "Head diameter" +msgstr "Diámetro de la cabeza" + +msgid "Max angle" +msgstr "" + +msgid "Detection radius" +msgstr "" + +msgid "Remove selected points" +msgstr "Eliminar puntos seleccionados" + +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "Auto-generar puntos" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " orejas de borde invalidos" + +msgid "Brim Ears" +msgstr "Orejas de borde" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" #: resources/data/hints.ini: [hint:Precise wall] msgid "" @@ -16751,8 +20487,8 @@ msgid "" "Did you know that turning on precise wall can improve precision and layer " "consistency?" msgstr "" -"Perímetro preciso. \n" -"¿Sabía que activar el perímetro precisa puede mejorar la precisión y la " +"Perímetro preciso.\n" +"¿Sabías que activar el perímetro precisa puede mejorar la precisión y la " "uniformidad de las capas?" #: resources/data/hints.ini: [hint:Sandwich mode] @@ -16773,7 +20509,7 @@ msgid "" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" "Temperatura de la cámara \n" -"¿Sabía que Snapmaker Orca admite la temperatura de la cámara?" +"¿Sabías que Snapmaker Orca tiene la función de control de temperatura de cámara?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -16791,7 +20527,7 @@ msgid "" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" "Ventilador auxiliar\n" -"¿Sabía que Snapmaker Orca admite un ventilador auxiliar de refrigeración de " +"¿Sabías que Snapmaker Orca admite un ventilador auxiliar de refrigeración de " "piezas?" #: resources/data/hints.ini: [hint:Air filtration] @@ -16808,7 +20544,7 @@ msgid "" "You can turn on/off the G-code window by pressing the C key." msgstr "" "Ventana de G-Code \n" -"Puede activar/desactivar la ventana de G-Code pulsando la tecla C." +"Puedes activar/desactivar la ventana de G-Code pulsando la tecla C." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -16816,7 +20552,7 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" -"Cambiar de espacio de trabajo. \n" +"Cambiar de espacio de trabajo.\n" "Puede cambiar entre los espacios de trabajo Preparar y Ver " "pulsando la tecla Tab." @@ -16824,11 +20560,11 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Cómo utilizar los atajos de teclado \n" "¿Sabías que Snapmaker Orca ofrece una amplia gama de atajos de teclado y " -"operaciones de escenas 3D." +"operaciones de escenas 3D?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16837,8 +20573,8 @@ msgid "" "the surface quality of your overhangs?" msgstr "" "Invertir en impar \n" -"Sabía que la función Invertir en impar puede mejorar " -"significativamente la calidad de la superficie de sus voladizos?" +"¿Sabías que la función Invertir en impar puede mejorar " +"significativamente la calidad de la superficie de los voladizos?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16858,21 +20594,20 @@ msgid "" msgstr "" "Arreglar modelo \n" "¿Sabías que puedes arreglar un modelo 3D dañado para evitar muchos problemas " -"de corte en el sistema Windows?" +"de laminado en el sistema Windows?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" -"Intervalo\n" -"¿Sabías que puedes generar un vídeo de intervalo de trabajo durante cada " -"impresión?" +"Timelapse\n" +"¿Sabías que puedes generar un vídeo timelapse durante cada impresión?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Auto-organizar\n" "¿Sabías que puedes ordenar automáticamente todos los objetos de tu proyecto?" @@ -16881,7 +20616,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Orientación automática\n" "¿Sabía que puede girar los objetos a una orientación óptima para la " @@ -16937,7 +20672,7 @@ msgid "" "settings for each object/part?" msgstr "" "Tabla de parámetros de laminado\n" -"¿Sabía que puede ver todos los objetos/partes de una tabla y cambiar los " +"¿Sabías que puedes ver todos los objetos/partes de una tabla y cambiar los " "parámetros de cada objeto/parte?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] @@ -16971,10 +20706,10 @@ msgid "" "lower resolution STL. Give it a try!" msgstr "" "STEP\n" -"¿Sabías que puedes mejorar la calidad de impresión cortando un archivo STEP " +"¿Sabías que puedes mejorar la calidad de impresión laminando un archivo STEP " "en lugar de un STL?\n" -"Snapmaker Orca soporta el corte de archivos STEP, proporcionando resultados más " -"suaves que un STL de menor resolución. ¡Pruébalo!" +"Snapmaker Orca soporta el laminado de archivos STEP, proporcionando resultados " +"más suaves que un STL de menor resolución. ¡Pruébalo!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -17007,7 +20742,7 @@ msgid "" "individual plates ready to print? This will simplify the process of keeping " "track of all the parts." msgstr "" -"Divide tus impresiones en planchas\n" +"Divide tus impresiones en bandejas\n" "¿Sabías que puedes dividir un modelo con muchas piezas en bandejas " "individuales listas para imprimir? Esto simplificará el proceso de " "seguimiento de todas las piezas." @@ -17019,9 +20754,9 @@ msgid "" "Did you know that you can print a model even faster, by using the Adaptive " "Layer Height option? Check it out!" msgstr "" -"Acelere su impresión con la altura de capa adaptable\n" +"Acelere su impresión con la Altura Adaptable de Capa\n" "¿Sabías que puedes imprimir un modelo aún más rápido utilizando la opción " -"Altura de capa adaptable? ¡Compruébalo!" +"Altura Adaptable de Capa? ¡Compruébalo!" #: resources/data/hints.ini: [hint:Support painting] msgid "" @@ -17031,9 +20766,9 @@ msgid "" "model that actually need it." msgstr "" "Pintura de soportes\n" -"¿Sabías que puedes pintar la ubicación de los soportes? Esta función " -"facilita la colocación del material de soporte sólo en las secciones del " -"modelo que realmente lo necesitan." +"¿Sabías que puedes pintar los soportes en cualquier ubicación? Esta función " +"facilita la colocación de soportes sólo en las secciones donde realmente sea " +"necesario." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" @@ -17045,7 +20780,7 @@ msgstr "" "Diferentes tipos de soportes\n" "¿Sabías que puedes elegir entre varios tipos de soportes? Los soportes en " "forma de árbol son ideales para modelos orgánicos, ahorran filamento y " -"mejoran la velocidad de impresión. ¡Compruébalos!" +"mejoran la velocidad de impresión. ¡Compruébalo!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" @@ -17055,18 +20790,18 @@ msgid "" "the best results." msgstr "" "Impresión de filamento de seda\n" -"¿Sabías que el filamento de seda necesita una consideración especial para " +"¿Sabías que el filamento de seda necesita una configuración especial para " "imprimirlo con éxito? Se recomienda siempre una temperatura más alta y una " "velocidad más baja para obtener los mejores resultados." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" -"Borde de adherencia para una mejor adherencia\n" -"¿Sabía que cuando los modelos de impresión tienen una pequeña interfaz de " +"Borde de adherencia\n" +"¿Sabías que cuando los modelos de impresión tienen una pequeña interfaz de " "contacto con la superficie de impresión, se recomienda utilizar un borde de " "adherencia?" @@ -17074,10 +20809,10 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Establecer parámetros para varios objetos\n" -"¿Sabías que puedes establecer parámetros de corte para todos los objetos " +"¿Sabías que puedes establecer parámetros de laminado para todos los objetos " "seleccionados a la vez?" #: resources/data/hints.ini: [hint:Stack objects] @@ -17085,14 +20820,14 @@ msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" -"Apilar objetos\n" -"¿Sabías que puedes apilar objetos como un todo?" +"Agrupar objetos\n" +"¿Sabías que puedes agrupar objetos como un todo?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Descarga en soporte/objetos/relleno\n" "¿Sabías que puedes ahorrarte el filamento desperdiciado vertiéndolo en " @@ -17108,18 +20843,19 @@ msgstr "" "¿Sabías que puedes utilizar más bucles de perímetro y mayor densidad de " "relleno de baja densidad para mejorar la resistencia del modelo?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"Cuando es necesario imprimir con la puerta de la impresora abierta \n" -"¿Sabía usted que la apertura de la puerta de la impresora puede reducir la " -"probabilidad de obstrucción del extrusor / hotend al imprimir filamento de " -"baja temperatura con una temperatura más alta de la cubierta. Más " +"¿Cuando es necesario imprimir con la puerta de la impresora abierta?\n" +"¿Sabías que la apertura de la puerta de la impresora puede reducir la " +"probabilidad de obstrucción del extrusor / cabezal al imprimir filamento de " +"baja temperatura con una temperatura más alta de la cubierta? Más " "información sobre esto en la Wiki." #: resources/data/hints.ini: [hint:Avoid warping] @@ -17127,12 +20863,1678 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Evite la deformación\n" -"Sabías que al imprimir materiales propensos a la deformación como el ABS, " +"¿Sabías que al imprimir materiales propensos a la deformación como el ABS, " "aumentar adecuadamente la temperatura de la cama térmica puede reducir la " -"probabilidad de deformaciones." +"probabilidad de deformaciones?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Altura de capa adaptativa" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Si se activa esta opción, se calculará automáticamente la altura de todas " +#~ "las capas de soporte de los árboles excepto la primera. " + +#~ msgid "AMS not connected" +#~ msgstr "AMS no conectado" + +#~ msgid "Ext Spool" +#~ msgstr "Carrete Externo" + +#~ msgid "Guide" +#~ msgstr "Guía" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Calibración de AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Se ha producido un problema durante la calibración. Haga clic para ver la " +#~ "solución." + +#~ msgid "Calibrate again" +#~ msgstr "Calibrar de nuevo" + +#~ msgid "Cancel calibration" +#~ msgstr "Cancelar calibración" + +#~ msgid "Feed Filament" +#~ msgstr "Cargar Filamento" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "" +#~ "Se necesita insertar una tarjeta SD antes de imprimir vía red local." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Se necesita insertar una tarjeta SD antes de enviar a la impresora." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Nota: Solo las ranuras AMS cargadas con el mismo tipo de material se " +#~ "pueden seleccionar." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Si hay dos filamentos idénticos en AMS, se habilitará el auto-reemplazo " +#~ "de filamentos AMS.\n" +#~ "(Actualmente admite el reemplazo automático de consumibles con la misma " +#~ "marca, tipo de material y color)." + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "El AMS estimará la capacidad del filamento Bambú restante después de que " +#~ "la información sea actualizada. Durante la impresión, la capacidad " +#~ "restante será actualizada automáticamente." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "La temperatura mínima recomendada es inferior a 190°C o la temperatura " +#~ "máxima recomendada es superior a 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "El modo espiral sólo funciona cuando el número de bucles de perímetro es " +#~ "1, los soportes están desactivados, las capas superiores de cubierta son " +#~ "0, la cantidad de relleno de baja densidad es 0 y el tipo de timelapse es " +#~ "tradicional." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Barrido en XY modo mecánico" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausa por agotamiento del filamento" + +#~ msgid "Heating hotend" +#~ msgstr "Calentando boquilla" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Calibrando la extrusión" + +#~ msgid "Printing was paused by the user" +#~ msgstr "El usuario ha pausado la impresión" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pausa al caer la cubierta frontal" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Calibrando el flujo de extrusión" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "" +#~ "Pausado debido a un mal funcionamiento de la temperatura de la boquilla" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "" +#~ "Se ha interrumpido debido a un mal funcionamiento de la temperatura de la " +#~ "cama caliente" + +#~ msgid "Skip step pause" +#~ msgstr "Pausa por salto de paso del motor" + +#~ msgid "Motor noise calibration" +#~ msgstr "Calibración de ruido de motor" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Se ha pausado por la pérdida del AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "En pausa debido a la baja velocidad del ventilador de disipación de calor" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pausado debido a un error en el control de temperatura de cámara" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pausado debido a un G-Code de usuario" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pausa por detección de acumulación de filamento en boquilla" + +#~ msgid "Cutter error pause" +#~ msgstr "Pausa por error de cortador" + +#~ msgid "First layer error pause" +#~ msgstr "Pausa por error en la primera capa" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pausa por obstrucción de boquilla" + +#~ msgid "Fatal" +#~ msgstr "Fatal" + +#~ msgid "Serious" +#~ msgstr "Grave" + +#~ msgid "Common" +#~ msgstr "Común" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "La temperatura actual de la cámara o la temperatura objetivo de la cámara " +#~ "excede los 45℃. Para evitar la obstrucción del extrusor, no se permite " +#~ "cargar filamento de baja temperatura (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Filamento de baja temperatura (PLA/PETG/TPU) ha sido cargado en el " +#~ "extrusor. Para evitar obstrucciones, no se permite ajustar la temperatura " +#~ "de la cámara por encima de los 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF no soportado por el AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Un objeto está colocado en el límite de la bandeja o excede el límite de " +#~ "altura.\n" +#~ "Por favor solucione el problema moviéndolo totalmente fuera o dentro de " +#~ "la bandeja, y confirme que la altura está dentro del volumen de impresión." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Puede encontrarse en \"Configuración > Red > Código de conexión\"\n" +#~ "en la impresora, como se muestra en la figura:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "La búsqueda de archivos en la tarjeta SD no es compatible con el firmware " +#~ "actual. Actualice el firmware de la impresora." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Verifique si la tarjeta SD está insertada en la impresora. Si aún no se " +#~ "puede leer, puedes intentar formatear la tarjeta SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "La búsqueda de archivos en la tarjeta SD no es posible en el modo Sólo " +#~ "LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Almacenamiento no disponible, inserte la tarjeta SD." + +#~ msgid "Cham" +#~ msgstr "Costura" + +#~ msgid "Still unload" +#~ msgstr "Aún descargado" + +#~ msgid "Still load" +#~ msgstr "Aún cargado" + +#~ msgid "Can't start this without SD card." +#~ msgstr "No puede iniciarse sin una tarjeta SD." + +#~ msgid "Update" +#~ msgstr "Actualizar" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "La sensibilidad de pausa es" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "No hay filamentos AMS. Por favor, seleccione una impresora en la página " +#~ "'Dispositivos' para cargar información AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Sincronizar filamentos con AMS descartará todos los perfiles de filamento " +#~ "y colores. ¿Desea continuar?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Se realizó la sincronización, ¿Desea sincronizar solo los cambios o " +#~ "resincronizar todo?" + +#~ msgid "Sync" +#~ msgstr "Sincronizar" + +#~ msgid "Resync" +#~ msgstr "Resincronizar" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Hay algunos filamentos desconocidos mapeados al perfil genérico. Por " +#~ "favor actualice o reinicie Snapmaker Orca para comprobar si hay una " +#~ "actualización de perfiles del sistema." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "¿Está seguro que quiere almacenar SVGs originales con sus rutas locales " +#~ "dentro del archivo 3MF?\n" +#~ "Si pulsa 'NO', todos los SVGs en el proyecto dejarán de ser editables." + +#~ msgid "Private protection" +#~ msgstr "Protección privada" + +#~ msgid "General Settings" +#~ msgstr "Configuración General" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Mostrar la notificación \"Consejo del Día\" al iniciar" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Si está activado, las sugerencias útiles serán mostradas al inicio." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Volumenes de descarga: Auto calcular en cada cambio de color." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Si está activado, auto calcula en cada cambio de color." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Volúmenes de descarga: Cálculo automático cada vez que se cambia el " +#~ "filamento." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Si está activada, calcula automáticamente cada vez que se cambia el " +#~ "filamento" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Disposición automática de la placa tras la clonación de objetos" + +#~ msgid "Network" +#~ msgstr "Red" + +#~ msgid "User Sync" +#~ msgstr "Sincronización de usuario" + +#~ msgid "System Sync" +#~ msgstr "Sincronizar sistema" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Asociar URLs a Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "Todo" + +#~ msgid "Downloads" +#~ msgstr "Descargas" + +#~ msgid "Dark Mode" +#~ msgstr "Modo Oscuro" + +#~ msgid "Home page and daily tips" +#~ msgstr "Página de inicio y consejos diarios" + +#~ msgid "Show home page on startup" +#~ msgstr "Mostrar la página de inicio en el arranque" + +#~ msgid "Please choose the filament color" +#~ msgstr "Por favor elija el color del filamento" + +#~ msgid "Send print job to" +#~ msgstr "Enviar el trabajo de impresión a" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "El %s del filamento excede el número de ranuras AMS. Por favor actualice " +#~ "el firmware para que soporte la asignación de ranuras AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "El filamento excede el número de ranuras AMS. Por favor actualice el " +#~ "firmware para que soporte la asignación de ranuras AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Se han establecido mapeos de filamentos a ranuras AMS. Puede hacer clic " +#~ "en un filamento de arriba para cambiar su asignación de ranura AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Por favor, haga clic en cada filamento superior para especificar la " +#~ "asignación de ranura AMS antes de enviar el trabajo de impresión" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "El firmware de la impresora solo soporta el mapeo secuencial de filamento " +#~ "=> ranura AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Es necesario introducir una tarjeta SD antes de imprimir." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Es necesario insertar una tarjeta SD para guardar el timelapse." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "boquilla memorizada: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "El diámetro de la boquilla en el archivo laminado no coincide con la " +#~ "boquilla guardada. Si ha cambiado la boquilla últimamente, vaya a " +#~ "Dispositivo > Piezas de la impresora para cambiar la configuración." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "La impresión de material de alta temperatura (material %s) con %s puede " +#~ "causar daños en la boquilla" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Conectando a la impresora. No es posible cancelar durante la conexión." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "¡Precaución! La calibración del flujo en una bandeja de PEI texturizada " +#~ "puede fallar debido a la superficie irregular." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Calibración Automática de Flujo usando Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Enviar a la tarjeta SD de la impresora" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Es necesario insertar una tarjeta SD antes de enviar a la tarjeta SD de " +#~ "la impresora." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "La impresora no soporta el envío directo a la tarjeta SD." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "El recuento de colores debe estar en el rango [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Colores de filamento actuales:" + +#~ msgid "Quick set:" +#~ msgstr "Configurar rápido:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Añadir extrusora consumible después de las extrusoras existentes." + +#~ msgid "Cluster colors" +#~ msgstr "Agrupar colores" + +#~ msgid "Map Filament" +#~ msgstr "Mapear Filamento" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Nota: el color ha sido seleccionado, puede elegir OK\n" +#~ "para continuar o ajustarlo manualmente." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Advertencia: El recuento de extrusores recién \n" +#~ "añadidos y actuales es superior a 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Calculado automático" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca volverá a calcular sus volúmenes de purgado cada vez que se cambie " +#~ "el color de los filamentos. Puedes desactivar el cálculo automático en " +#~ "Snapmaker Orca > Preferencias." + +#~ msgid "unloaded" +#~ msgstr "Descargado" + +#~ msgid "loaded" +#~ msgstr "Cargado" + +#~ msgid "Filament #" +#~ msgstr "Filamento #" + +#~ msgid "From" +#~ msgstr "Desde" + +#~ msgid "To" +#~ msgstr "A" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Continuar Imprimiendo (defectos aceptables)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Continuar Imprimiendo (problema solucionado)" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " está muy cerca de otros, puede conllevar colisiones cuando se imprime." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "No se pueden imprimir juntos varios filamentos que tengan una gran " +#~ "diferencia de temperatura. De lo contrario, el extrusor y la boquilla " +#~ "pueden bloquearse o dañarse durante la impresión" + +#~ msgid "Ironing angle" +#~ msgstr "Ángulo de alisado" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "El ángulo en el que se realiza el alisado. Un número negativo desactiva " +#~ "esta función y utiliza el método por defecto." + +#~ msgid "Remove small overhangs" +#~ msgstr "Eliminar voladizos pequeños" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Elimina los voladizos pequeños que posiblemente no necesiten soportes." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Sólo se guardará uno de los resultados con el mismo nombre. ¿Está seguro " +#~ "de que desea reemplazar los otros resultados?" + +#~ msgid "External Spool" +#~ msgstr "Bobina Externa" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Por favor, introduzca valores válidos:\n" +#~ "Temp inicial: <= 350\n" +#~ "Temp final: >=170\n" +#~ "Temp inicial > Temp final + 5" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "No se ha introducido la impresora personalizada o el modelo, por favor, " +#~ "introdúzcalo." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "Boquilla en perfil: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "¿El diámetro de la boquilla en su configuración no corresponde con el " +#~ "diámetro memorizado? ¿Hizo un cambio de boquilla?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "" +#~ "*El material de impresión %s con %s podría causar daños en la boquilla" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Mejorar precisión de la carcasa ajustando el espaciado del perímetro " +#~ "exterior. Esto además mejora la consistencia de capa." + +#~ msgid "Enable filament ramming." +#~ msgstr "Activar el moldeado de extremo del filamento" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Rueda del ratón" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Rueda del ratón" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Mayús + Botón izquierdo del ratón" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Intro" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Mover ratón arriba o abajo" + +#~ msgid "Left mouse button:" +#~ msgstr "Botón izquierdo del ratón:" + +#~ msgid "Right mouse button:" +#~ msgstr "Botón derecho del ratón:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + botón izquierdo del ratón:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + Botón derecho del ratón:" + +#~ msgid "Recent projects" +#~ msgstr "Proyectos recientes" + +#~ msgid "Maximum recent projects" +#~ msgstr "Máximos proyectos recientes" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Máxima cantidad de proyectos recientes" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Cualquier flecha" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Botón izquierdo de ratón" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Botón izquierdo de ratón" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Cualquier flecha" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Botón izquierdo de ratón" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Botón izquierdo de ratón" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Botón izquierdo de ratón" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Mayúsculas+Cualquier flecha" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Rueda del ratón" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Rueda del ratón" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Rueda del ratón" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Rueda del ratón" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shit+Rueda de ratón" + +#~ msgid "Set Position" +#~ msgstr "Establecer Posición" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "" +#~ "Haga clic con el botón derecho del ratón en el icono para reparar el " +#~ "objeto" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "El objeto de destino sólo contiene una pieza y no se puede dividir." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Esquema de colores" + +#~ msgid "Percent" +#~ msgstr "Porcentaje" + +#~ msgid "Used filament" +#~ msgstr "Filamento usado" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Más..." + +#~ msgid "More calibrations" +#~ msgstr "Más calibraciones" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Tarjeta SD" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Sin tarjeta SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Tarjeta SD Anormal" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "La expulsión del dispositivo %s(%s) ha fallado." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "Número inválido" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "Boquilla memorizada: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Temperatura de cama cuando la bandeja fría está instalada. Valor 0 " +#~ "significa que el filamento no es compatible para imprimir en la bandeja " +#~ "fría SuperTack" + +#~ msgid "Ramming settings" +#~ msgstr "Parámetros de Moldeado de Extremo" + +#~ msgid "Profile dependencies" +#~ msgstr "Dependencias de perfil" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "el paquete de configuración es incompatible con la APP actual." + +#~ msgid "Total ramming time" +#~ msgstr "Tiempo total de Moldeado de Extremo" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Volumen de moldeado de extremo total" + +#~ msgid "Ramming line width" +#~ msgstr "Ancho de línea de Moldeado de Extremo" + +#~ msgid "Ramming line spacing" +#~ msgstr "Separación de línea de moldeado de extremo" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "Continuar" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Modo clásico" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Activar esta opción para usar el modo clásico" + +#~ msgid "Compatible machine" +#~ msgstr "Máquina compatible" + +#~ msgid "Compatible machine condition" +#~ msgstr "Condición compatibilidad de máquina" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Condición de compatibilidad de los perfiles de proceso" + +#~ msgid "Default filament color" +#~ msgstr "Color de filamento por defecto" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Rotar la dirección del relleno sólido" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Rotar 90° la dirección del relleno sólido en cada capa." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Modelo de compensación del flujo, utilizado para ajustar el flujo en " +#~ "zonas de relleno pequeñas. El modelo se expresa como una serie de parejas " +#~ "de valores separados por comas para las longitudes de extrusión y los " +#~ "factores de corrección del flujo, una pareja por línea, con el siguiente " +#~ "formato: \"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "La altura de capa máxima imprimible por el extrusor. Se utiliza para " +#~ "limitar la altura máxima de capa cuando se habilita la altura de capa " +#~ "adaptativa" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "La menor altura de capa imprimible para el extrusor. Se utiliza para " +#~ "limitar la altura mínima de la capa cuando se activa la altura de capa " +#~ "adaptativa." + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Retracción en la capa superior" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Forzar una retracción en la capa superior. Desactivarlo podría evitar " +#~ "atascos en patrones muy lentos con movimientos pequeños, como la curva de " +#~ "Hilbert" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Una pequeña cantidad de material se retrae del extrusor para evitar el " +#~ "rezumado durante desplazamientos largos. Ajustar a cero para desactivar " +#~ "la retracción" + +#~ msgid "Speed of retractions." +#~ msgstr "Velocidad de las retracciones" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Velocidad de recarga del filamento en el extrusor. Cero significa la " +#~ "misma velocidad que la retracción" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Espaciado de las líneas de interfaz. Cero significa que la interfaz es " +#~ "sólida" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Espesor mínimo de los detalles finos. Las características del modelo que " +#~ "sean más finas que este valor no se imprimirán, mientras que las " +#~ "características más gruesas que el Tamaño mínimo de la característica se " +#~ "ensancharán hasta el Ancho mínimo de perímetro. Se expresa en porcentaje " +#~ "sobre el diámetro de la boquilla" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "carga los ajustes actualizados de proceso/máquina cuando se usa actualizar" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Hemos añadido la auto-calibración para diferentes filamentos, los cuales " +#~ "están totalmente automatizados, y los resultados se guardarán en la " +#~ "impresora para futuros usos. Solo necesita calibrar en los siguientes " +#~ "casos:\n" +#~ "1. Sí introduce un nuevo filamento, o de diferentes marcas/modelos, o el " +#~ "filamento está húmedo; \n" +#~ "2. Sí la boquilla está desgastada o se sustituye por otra nueva;\n" +#~ "3. Si la velocidad volumétrica máxima o la temperatura de impresión se " +#~ "cambia en los ajustes de filamento." + +#~ msgid "step: " +#~ msgstr "Incremento: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Cargar STL" + +#~ msgid "Load svg" +#~ msgstr "Cargar svg" + +#~ msgid "Back Page 1" +#~ msgstr "Volver a la Página 1" + +#~ msgid "Delete Filament" +#~ msgstr "Borrar Filamento" + +#~ msgid "Refresh Printers" +#~ msgstr "Refrescar Impresoras" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "En comparación con el perfil predeterminado de una boquilla de 0,2 mm, " +#~ "tiene una altura de capa menor. Esto da como resultado líneas de capa " +#~ "casi invisibles y una mayor calidad de impresión, pero un tiempo de " +#~ "impresión más corto." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "En comparación con el perfil predeterminado de boquilla de 0,2 mm, tiene " +#~ "una altura de capa menor, y da como resultado líneas de capa mínimas y " +#~ "una mayor calidad de impresión, pero un tiempo de impresión más corto." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Tiene una altura de capa muy grande, y da lugar a líneas de capa muy " +#~ "visibles, baja calidad de impresión y menor tiempo de impresión." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "En comparación con el perfil predeterminado de una boquilla de 0,8 mm, " +#~ "tiene una mayor altura de capa. Esto da lugar a líneas de capa muy " +#~ "visibles y a una calidad de impresión mucho menor, pero un tiempo de " +#~ "impresión más corto en algunos casos." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "En comparación con el perfil predeterminado de una boquilla de 0,8 mm, " +#~ "tiene una altura de capa mucho mayor. Esto da lugar a líneas de capa " +#~ "extremadamente visibles y a una calidad de impresión mucho menor, pero un " +#~ "tiempo de impresión mucho más corto en algunos casos." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "En comparación con el perfil predeterminado de una boquilla de 0,8 mm, " +#~ "tiene una altura de capa menor. Esto se traduce en menos líneas de capa, " +#~ "aunque visibles, y en una calidad de impresión ligeramente superior, pero " +#~ "con un tiempo de impresión más largo en algunos casos." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "La conexión con Flashforge funciona correctamente." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "No se ha podido conectar a Flashforge" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Hemos añadido el ajuste experimental \"Árboles Delgados\" que presenta " +#~ "volúmenes de soporte más pequeños con menos fuerza.\n" +#~ "Recomendamos usarlo con: 0 capas de interfaz, 0 distancia superior, 2 " +#~ "perímetros." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Para \"Árboles fuertes\" y \"Árboles Híbridos\", recomendamos los " +#~ "siguientes ajustes: al menos 2 capas de interfaz, al menos 0.1mm de " +#~ "distancia superior en z o usar materiales de soporte en la interfaz." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Diámetro de ramas con perímetro doble" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Las ramas con un área mayor que el área de un círculo de este diámetro se " +#~ "imprimirán con doble perímetro para mayor estabilidad. Establezca este " +#~ "valor en cero para no usar doble perímetro." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "" +#~ "Este ajuste especifica el número de perímetros alrededor del soporte" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Soporte: generando trayectoria en la capa %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Soporte: detectando voladizos" + +#~ msgid "Support: propagate branches" +#~ msgstr "Soporte: propagación de ramas" + +#~ msgid "Support: draw polygons" +#~ msgstr "Soporte: dibujando polígonos" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Soporte: generación de trayectoria" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Soporte: generando polígonos en la capa %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Soporte: arreglando huecos en la capa %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Soporte: propagando ramas en la capa %d" + +#~ msgid "Current Cabin humidity" +#~ msgstr "Humedad de cabina actual" + +#~ msgid "Stopped." +#~ msgstr "Detenido." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Error de conexión [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Error de inicialización (conexión del dispositivo no lista)." + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Error de inicialización (almacenamiento no disponible, inserte una " +#~ "tarjeta SD)." + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "¡Fallo al inicializar (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Conexión de red fallida (Mandando archivo de impresión)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Paso 1, por favor verifique que Snapmaker Orca y la impresora se encuentran " +#~ "en la misma red local." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Paso 2, si la IP y el Código de Acceso de abajo son diferentes de los " +#~ "valores presentes en su impresora, por favor, corríjalos." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Paso 3: Haga ping a la dirección IP para comprobar la perdida de paquetes " +#~ "y la latencia." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Refrigeración forzada para voladizos y puentes" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Habilite esta opción para optimizar la velocidad del ventilador de " +#~ "refrigeración de la pieza para voladizos y puentes para obtener una mejor " +#~ "refrigeración" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Velocidad del ventilador para voladizos" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Forzar el ventilador de la pieza a esta velocidad cuando se imprimen " +#~ "puentes o perímetros en voladizo que tiene un gran ángulo de voladizo. Al " +#~ "forzar la refrigeración de los voladizos y puentes se puede obtener una " +#~ "mejor calidad para estas piezas" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Umbral de refiregeación para voladizos" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Fuerza al ventilador de refrigeración a una velocidad específica cuando " +#~ "el ángulo de voladizo de la pieza impresa excede este valor. Expresado " +#~ "como porcentaje, indica la anchura de la línea sin soporte de la capa " +#~ "inferior. Un 0%% significa forzar la refrigeración de todo el perímetro " +#~ "exterior sin importar el ángulo de voladizo" + +#~ msgid "Bridge infill direction" +#~ msgstr "Ángulo del relleno en puente" + +#~ msgid "Bridge density" +#~ msgstr "Densidad de puente" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Densidad de puentes externos. 100% significa puente sólido. Por defecto " +#~ "es 100%." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Mejore la precisión de la cubierta ajustando la separación entre " +#~ "perímetros exteriores. Esto también mejora la consistencia de las capas.\n" +#~ "Nota: Este ajuste sólo tendrá efecto si la secuencia de perímetros está " +#~ "configurada como Interior-Exterior" + +#~ msgid "Thick bridges" +#~ msgstr "Puentes gruesos" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "Filtra los pequeños puentes internos (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Esta opción puede ayudar a reducir el acolchado en las superficies " +#~ "superiores de los modelos muy inclinados o curvados.\n" +#~ "\n" +#~ "Por defecto, los pequeños puentes internos se filtran y el relleno sólido " +#~ "interno se imprime directamente sobre el relleno disperso. Esto funciona " +#~ "bien en la mayoría de los casos, acelerando la impresión sin comprometer " +#~ "demasiado la calidad de la superficie superior.\n" +#~ "\n" +#~ "Sin embargo, en modelos muy inclinados o curvados, especialmente cuando " +#~ "se utiliza una densidad de relleno disperso demasiado baja, esto puede " +#~ "dar lugar a la curvatura del relleno sólido no soportado, causando " +#~ "pillowing.\n" +#~ "\n" +#~ "Si se desactiva esta opción, se imprimirá la capa puente interna sobre el " +#~ "relleno sólido interno ligeramente sin soporte. Las opciones siguientes " +#~ "controlan la cantidad de filtrado, es decir, la cantidad de puentes " +#~ "internos creados.\n" +#~ "\n" +#~ "Filtro - active esta opción. Este es el comportamiento por defecto y " +#~ "funciona bien en la mayoría de los casos.\n" +#~ "\n" +#~ "Filtrado limitado - crea puentes internos en superficies muy inclinadas, " +#~ "evitando crear puentes internos innecesarios. Esto funciona bien para la " +#~ "mayoría de los modelos difíciles.\n" +#~ "\n" +#~ "Sin filtro: crea puentes internos en todos los posibles salientes " +#~ "internos. Esta opción es útil para modelos de superficie superior muy " +#~ "inclinada. Sin embargo, en la mayoría de los casos crea demasiados " +#~ "puentes innecesarios." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Esta velocidad de ventilador se fuerza cuando se imprimen todas las " +#~ "interfaces de soporte, con el objetivo de debilitar la unión con la " +#~ "pieza. Sólo puede ser anulado por disable_fan_first_layers." + +#~ msgid "" +#~ "A lower value results in smoother extrusion rate transitions. However, " +#~ "this results in a significantly larger G-code file and more instructions " +#~ "for the printer to process.\n" +#~ "\n" +#~ "Default value of 3 works well for most cases. If your printer is " +#~ "stuttering, increase this value to reduce the number of adjustments " +#~ "made.\n" +#~ "\n" +#~ "Allowed values: 1-5" +#~ msgstr "" +#~ "Un valor más bajo resulta en transiciones de velocidad de extrusión más " +#~ "suaves. Sin embargo, esto resulta en un archivo G-Code significativamente " +#~ "más grande y más instrucciones para que la impresora procese.\n" +#~ "\n" +#~ "El valor por defecto de 3 funciona bien en la mayoría de los casos. Si su " +#~ "impresora está tartamudeando, aumente este valor para reducir el número " +#~ "de ajustes realizados.\n" +#~ "\n" +#~ "Valores permitidos: 1-5" + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "La velocidad mínima de impresión a la que la impresora reducirá la " +#~ "velocidad para intentar mantener el tiempo mínimo de capa anterior, " +#~ "cuando la ralentización para un mejor enfriamiento de la capa está " +#~ "activada." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Mayúsculas + Botón izquierdo del ratón" + +#~ msgid "Unselect" +#~ msgstr "Deseleccionar" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Escala" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Forzar elevación Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Salto en Z al retraer" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "Número de mm que debe tener el voladizo para que la inversión se " +#~ "considere útil. Puede ser % del ancho del perímetro.\n" +#~ "El valor 0 permite la inversión en todas las capas pares." + +#~ msgid "Reverse on odd" +#~ msgstr "Invertir en impar" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Extruir los perímetros que tienen una parte sobre un voladizo en sentido " +#~ "inverso en las capas impares. Este patrón alterno puede mejorar " +#~ "drásticamente los voladizos pronunciados.\n" +#~ "\n" +#~ "Este ajuste también puede ayudar a reducir la deformación de la pieza " +#~ "debido a la reducción de tensiones en los perímetros de la pieza." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Aplicar la lógica de perímetros inversos sólo en los perímetros " +#~ "internos.\n" +#~ "\n" +#~ "Esta configuración reduce en gran medida las tensiones de la pieza, ya " +#~ "que ahora se distribuyen en direcciones alternas. Esto debería reducir " +#~ "las deformaciones de la pieza, manteniendo la calidad de los perímetros " +#~ "externos. Esta función puede ser muy útil para materiales propensos a " +#~ "deformarse, como ABS/ASA, y también para filamentos elásticos, como TPU y " +#~ "Silk PLA. También puede ayudar a reducir deformaciones en regiones " +#~ "flotantes sobre soportes.\n" +#~ "\n" +#~ "Para que este ajuste sea más eficaz, se recomienda establecer el Umbral " +#~ "Inverso en 0 para que todos los perímetros internos se impriman en " +#~ "direcciones alternas en las capas impares, independientemente de su " +#~ "ángulo de voladizo." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Número de mm que debe tener el voladizo para que la inversión se " +#~ "considere útil. Puede ser un % o de la anchura del perímetro.\n" +#~ "El valor 0 permite la inversión en todas las capas impares." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "La dirección en la que se extruyen los bucles del muro cuando se mira " +#~ "desde arriba.\n" +#~ "\n" +#~ "Por defecto, todos los muros se extruyen en el sentido contrario a las " +#~ "agujas del reloj, a menos que esté activada la opción Invertir en " +#~ "impares. Establecer esta opción a cualquier opción que no sea Auto " +#~ "forzará la dirección del perímetro, independientemente de si se activa la " +#~ "opción Invertir en impar.\n" +#~ "\n" +#~ "Esta opción se desactivará si se activa el modo jarrón en espiral." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Cuando se imprime por objeto, el extrusor puede chocar contra la falda.\n" +#~ "En ese caso, reinicie la capa de falda a 1 para evitarlo." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "Un protector contra corrientes de aire es útil para proteger una " +#~ "impresión en ABS o ASA de la deformación y el desprendimiento de la cama " +#~ "de impresión debido a las corrientes de aire. Suele ser necesario sólo en " +#~ "impresoras de abiertas, es decir, sin encapsular.\n" +#~ "\n" +#~ "Opciones:\n" +#~ "Activado = la falda es tan alta como el objeto impreso más alto.\n" +#~ "Limitado = la falda es tan alta cómo se especifica en el ajuste \"Altura " +#~ "de falda\"\n" +#~ "\n" +#~ "Nota: Con el protector contra corrientes de aire activo, la falda se " +#~ "imprimirá a la distancia especificada en \"Distancia de falda\" del " +#~ "objeto. Por lo tanto, si se usan bordes de adherencia, puede cruzarse con " +#~ "ellos. Para evitarlo, aumente el valor de la \"Distancia de falda\".\n" + +#~ msgid "Limited" +#~ msgstr "Limitado" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Ajuste este valor para evitar que se impriman perímetros cortos y no " +#~ "cerrados, lo que podría aumentar el tiempo de impresión. Los valores más " +#~ "altos eliminan más perímetros y más largos.\n" +#~ "\n" +#~ "NOTA: Las superficies inferior y superior no se verán afectadas por este " +#~ "valor para evitar huecos visuales en el exterior del modelo. Ajuste " +#~ "\"Umbral para generar un solo perímetro\" en la configuración avanzada " +#~ "para ajustar la sensibilidad de lo que se considera una superficie " +#~ "superior. El \"Umbral para generar un solo perímetro\" sólo es visible si " +#~ "este valor es superior al valor predeterminado de 0,5, o si las " +#~ "superficies superiores de un solo perímetro están activados." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "No filtrar los pequeños puentes internos (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Esta opción puede ayudar a reducir el pillowing en superficies superiores " +#~ "en modelos muy inclinados o curvados.\n" +#~ "\n" +#~ "Por defecto, los pequeños puentes internos se filtran y el relleno sólido " +#~ "interno se imprime directamente sobre el relleno de baja densidad. Esto " +#~ "funciona bien en la mayoría de los casos, acelerando la impresión sin " +#~ "comprometer demasiado la calidad de la superficie superior.\n" +#~ "\n" +#~ "Sin embargo, en modelos muy inclinados o curvados, especialmente cuando " +#~ "se utiliza una densidad de relleno de baja densidad demasiado baja, esto " +#~ "puede dar lugar a la curvatura del relleno sólido no soportado, causando " +#~ "pillowing.\n" +#~ "\n" +#~ "Activando esta opción se imprimirá la capa puente interna sobre el " +#~ "relleno sólido interno ligeramente sin soporte. Las opciones siguientes " +#~ "controlan la cantidad de filtrado, es decir, la cantidad de puentes " +#~ "internos creados.\n" +#~ "\n" +#~ "Desactivado - Desactiva esta opción. Este es el comportamiento por " +#~ "defecto y funciona bien en la mayoría de los casos.\n" +#~ "\n" +#~ "Filtrado limitado - Crea puentes internos en superficies muy inclinadas, " +#~ "evitando crear puentes internos innecesarios. Funciona bien en la mayoría " +#~ "de los modelos difíciles.\n" +#~ "\n" +#~ "Sin filtro: crea puentes interiores en todos los posibles voladizos " +#~ "interiores. Esta opción es útil para modelos de superficie superior muy " +#~ "inclinada. Sin embargo, en la mayoría de los casos crea demasiados " +#~ "puentes innecesarios." + +#~ msgid "Shrinkage" +#~ msgstr "Contracción" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "Su objeto parece demasiado grande, ¿Desea disminuirlo para que quepa en " +#~ "la cama caliente automáticamente?." + +#~ msgid "Shift+G" +#~ msgstr "Shift+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Activa el relleno de huecos para las superficies seleccionadas. La " +#~ "longitud mínima de hueco que se rellenará puede controlarse desde la " +#~ "opción filtrar huecos pequeños que aparece más abajo.\n" +#~ "\n" +#~ "Opciones: \n" +#~ "1. En todas partes: Aplica el relleno de huecos a las superficies sólidas " +#~ "superior, inferior e interna \n" +#~ "2. Superficies superior e inferior: Aplica el relleno de huecos sólo a " +#~ "las superficies superior e inferior.\n" +#~ "3. En ninguna parte: Desactiva el relleno de huecos\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Disminuya este valor ligeramente (por ejemplo 0,9) para reducir la " +#~ "cantidad de material para mejorar o evitar el hundimiento de puentes." + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Este valor regula el grosor de la capa puente interna. Es la primera capa " +#~ "sobre el relleno de baja densidad. Disminuya ligeramente este valor (por " +#~ "ejemplo, 0,9) para mejorar la calidad de la superficie sobre el relleno " +#~ "de baja densidad." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Este factor afecta a la cantidad de material de para relleno sólido " +#~ "superior. Puede disminuirlo ligeramente para obtener un acabado suave de " +#~ "superficie" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Este factor afecta a la cantidad de material para el relleno sólido " +#~ "inferior" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Active está opción para bajar la velocidad de impresión en las áreas " +#~ "donde potencialmente podrían formarse perímetros curvados" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Velocidad del puente y perímetro completo en voladizo" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Velocidad del puente interno. Si el valor es expresado como porcentaje, " +#~ "será calculado en base a bridge_speed. El valor por defecto es 150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tiempo para cargar un nuevo filamento cuando se cambia de filamento. Sólo " +#~ "para estadísticas" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tiempo para descargar el filamento viejo cuando se cambia de filamento. " +#~ "Sólo para las estadísticas" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tiempo que tarda el firmware de la impresora (o la Unidad Multi Material " +#~ "2.0) en cargar un nuevo filamento durante un cambio de cabezal (al " +#~ "ejecutar el T-Code). El estimador de tiempo del G-Code añade este tiempo " +#~ "al tiempo total de impresión." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tiempo que tarda el firmware (para la unidad Multi Material 2.0) en " +#~ "descargar el filamento durante el cambio de cabezal ( cuando se ejecuta " +#~ "el T-Code). Esta duración se añade a la duración total de impresión " +#~ "estimada del G-Code." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "" +#~ "Filtra los huecos menores que el umbral especificado. Este ajuste no " +#~ "afectará a las capas superior/inferior" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Active esta opción para controlar la temperatura de la cámara. Se añadirá " +#~ "un comando M191 antes de \"machine_start_gcode\"\n" +#~ "Comandos G-Code: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Una mayor temperatura de la cámara puede ayudar a suprimir o reducir la " +#~ "deformación y potencialmente conducir a una mayor resistencia de unión " +#~ "entre capas para materiales de alta temperatura como ABS, ASA, PC, PA, " +#~ "etc. Al mismo tiempo, la filtración de aire de ABS y ASA empeorará. " +#~ "Mientras que para PLA, PETG, TPU, PVA y otros materiales de baja " +#~ "temperatura, la temperatura real de la cámara no debe ser alta para " +#~ "evitar obstrucciones, por lo que 0, que significa apagar, es muy " +#~ "recomendable" + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Profundidad de entrelazado de una región segmentada. Cero desactiva esta " +#~ "característica." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Extrusor de torre de purga" #~ msgid "" #~ "When recording timelapse without toolhead, it is recommended to add a " @@ -17147,17 +22549,6 @@ msgstr "" #~ "construcción y elegir \"Añadir Primitivo\"->\"Intervalo de Torre de Purga" #~ "\"." -#~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more printers, Please go to printer selection" -#~ msgstr "" -#~ "Cambiaríamos el nombre de los preajustes a \"Número de serie del Vendedor " -#~ "@impresora que ha seleccionado\". \n" -#~ "Para añadir preajustes para más impresoras, vaya a selección de impresoras" - #~ msgid "Current association: " #~ msgstr "Asociación actual:" @@ -17171,8 +22562,8 @@ msgstr "" #~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " #~ "models from Printable.com" #~ msgstr "" -#~ "Asociar Snapmaker Orca con prusaslicer:// enlaces para que Orca puede abrir " -#~ "modelos de Printables.com" +#~ "Asociar Snapmaker Orca con enlaces prusaslicer:// para que Orca puede abrir " +#~ "modelos desde Printables.com" #~ msgid "Associate bambustudio://" #~ msgstr "Asociar bambustudio://" @@ -17181,8 +22572,8 @@ msgstr "" #~ "Associate Snapmaker Orca with bambustudio:// links so that Orca can open " #~ "models from makerworld.com" #~ msgstr "" -#~ "Asociar Snapmaker Orca con bambustudio:// enlaces para que Orca puede abrir " -#~ "modelos de makerworld.com" +#~ "Asociar Snapmaker Orca con enlaces bambustudio:// para que Orca puede abrir " +#~ "modelos desde makerworld.com" #~ msgid "Associate cura://" #~ msgstr "Asociar cura://" @@ -17205,21 +22596,11 @@ msgstr "" #~ msgstr "Por favor, introduzca un valor válido (K en 0~0.3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Por favor, introduzca un valor válido (K en 0~0.3, N en 0.6~2.0))" - -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Seleccionar impresoras conectadas (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Seleccionar impresoras conectadas (%d/6)" +#~ msgstr "Por favor, introduzca un valor válido (K en 0~0.3, N en 0.6~2.0)" #~ msgid "PrintingPause" #~ msgstr "Impresión Pausada" -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "Printer local connection failed; please try again." - #~ msgid "" #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" #~ "\n" @@ -17284,18 +22665,12 @@ msgstr "" #~ msgstr "" #~ "Por favor, encuentre la esquina con ángulo perfecto para la extrusión" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " #~ "first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " #~ "push out the printed walls where it is attached to them, resulting in a " #~ "worse external surface finish. It can also cause the infill to shine " #~ "through the external surfaces of the part." @@ -17311,12 +22686,9 @@ msgstr "" #~ "También puede hacer que el relleno brille a través de las superficies " #~ "externas de la pieza." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca está basado en BambuStudio por Bambulab, el cual está basado " @@ -17350,37 +22722,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Descargar" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Elija una ranura AMS y pulse el botón \"Cargar\" o \"Descargar\" para " -#~ "cargar o descargar automáticamente el filamento." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Placa Base" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- ℃" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "active" #~ msgstr "activo" @@ -17421,7 +22765,7 @@ msgstr "" #~ "indicador no represente la cámara con precisión." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Nota: si se inserta un nuevo filamento durante la impresión, el AMS no " @@ -17438,8 +22782,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "¡Inicialización fallida (No hay Cámara)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "La impresora está ocupada descargando. Por favor, espere a que finalice." @@ -17461,20 +22804,6 @@ msgstr "" #~ msgid "Load failed [%d]!" #~ msgstr "¡La carga ha fallado [%d]!" -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "Load failed [%d]" - -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Failed to fetch model infomation from printer." - -#~ msgid "Failed to parse model infomations." -#~ msgstr "Fallo al analizar la información de modelado." - #~ msgid "Connection lost. Please retry." #~ msgstr "Conexión perdida. Por favor, reinténtelo." @@ -17483,20 +22812,20 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Has modificado algunos ajustes del perfil \"%1%\". \n" +#~ "Has modificado algunos ajustes del perfil \"%1%\".\n" #~ "¿Deseas mantener estas modificaciones en los ajustes (nuevo valor) " #~ "después de cambiar de perfil?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Has cambiado algunos ajustes de perfil. \n" +#~ "Has cambiado algunos ajustes de perfil.\n" #~ "¿Deseas mantener estas modificaciones en los ajustes (nuevo valor) " #~ "después de cambiar de perfil?" @@ -17580,12 +22909,12 @@ msgstr "" #~ "asegurar el grosor del perímetro vertical. " #~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " #~ "wall\n" -#~ "No - Dont use alternate extra wall" +#~ "No - Don't use alternate extra wall" #~ msgstr "" -#~ "¿Cambiar estos ajustes automáticamente? \n" +#~ "¿Cambiar estos ajustes automáticamente?\n" #~ "Sí - Desactivar el grosor del perímetro vertical y activar la pared " #~ "adicional alternativa No - No utilizar la pared adicional alternativa" @@ -17596,9 +22925,6 @@ msgstr "" #~ "Añadir relleno sólido al lado de capas inclinadas para garantizar el " #~ "grosor de carcasa vertical (capas sólidas superior+inferior)" -#~ msgid " " -#~ msgstr " " - #~ msgid "Text-Rotate" #~ msgstr "Rotación de texto" @@ -17611,13 +22937,6 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Paquete de configuración actualizado a " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "Mejorar precisión de la carcasa ajustando el espaciado del perímetro " -#~ "exterior. Esto además mejora la consistencia de capa." - #~ msgid "" #~ "The minimum printing speed for the filament when slow down for better " #~ "layer cooling is enabled, when printing overhangs and when feature speeds " @@ -17628,38 +22947,12 @@ msgstr "" #~ "se imprimen voladizos y cuando las velocidades de las características no " #~ "se especifican explícitamente." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Capas de baja densidad (EXPERIMENTAL)" - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "La Configuración no será cargada." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "El 3mf está generado por un Snapmaker Orca antiguo, cargar solo datos de " -#~ "geometría." - -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "Se recomienda la extrusión relativa cuando se utiliza la opción " -#~ "\"label_objects\". Algunos extrusores funcionan mejor con esta opción " -#~ "desactivada (modo de extrusión absoluta). La torre de purga sólo es " -#~ "compatible con el modo relativo. Siempre activa en las impresoras " -#~ "BambuLab. Marcada por defecto" - #~ msgid "Fan Speed: " #~ msgstr "Velocidad del ventilador:" -#~ msgid "The 3mf is not from Bambu Lab, load geometry data only." -#~ msgstr "El 3mf no es Bambu lab, solo se carga datos de geometría." - -#~ msgid "Bamabu Engineering Plate" -#~ msgstr "Placa de Ingenieria Bambu" - #~ msgid "Bridge flow" #~ msgstr "Flujo del puente" @@ -17701,10 +22994,10 @@ msgstr "" #~ msgstr "los conectores están fuera del objeto" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Estado inválido. \n" +#~ "Estado inválido.\n" #~ "No se ha seleccionado ninguna pieza para conservar después del corte" #~ msgid " search results" @@ -17750,14 +23043,8 @@ msgstr "" #~ "¿Le gustaría actualizar su versión de Bambú Studio para activar todas las " #~ "funcionalidades en este archivo de laminador?" -#~ msgid "Bamabu Smooth PEI Plate" -#~ msgstr "Bandeja Lisa PEI Bambú" - -#~ msgid "Bamabu Textured PEI Plate" -#~ msgstr "Bandeja Texturizada PEI Bambú" - #~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " +#~ "Orca recalculates your flushing volumes every time the filament colors " #~ "change. You can change this behavior in Preferences." #~ msgstr "" #~ "Snapmaker Orca podría recalcular su volumen de descarga todas las veces que " @@ -17783,9 +23070,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "Elige el archivo SLA:" -#~ msgid "Import file" -#~ msgstr "Importar archivo" - #~ msgid "Import model and profile" #~ msgstr "Importar modelo y perfil" @@ -17850,14 +23134,13 @@ msgstr "" #~ "Sí - cambiar a patrón rectilíneo automaticamente\n" #~ "No - reiniciar a valor de densidad no 100% por defecto automáticamente" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "" -#~ "Caliente la boquilla a más de 170 grados antes de cargar el filamento." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." +#~ msgstr "Caliente la boquilla a más de 170°C antes de cargar el filamento." -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "Mostrar la ventana de G-Code" -#~ msgid "If enabled, g-code window will be displayed." +#~ msgid "If enabled, G-code window will be displayed." #~ msgstr "Si está activado, se mostrará la ventana de G-Code." #, c-format @@ -17878,18 +23161,12 @@ msgstr "" #~ msgid " doesn't work at 100%% density " #~ msgstr " no funciona con una densidad del 100%% " -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Herramienta-Tumbar Boca Abajo" #~ msgid "Export as STL" #~ msgstr "Exportar como STL" -#~ msgid "Check cloud service status" -#~ msgstr "Check cloud service status" - #~ msgid "Please input a valid value (K in 0~0.5)" #~ msgstr "Por favor, introduce un valor válido (K en 0~0.5)" @@ -17899,8 +23176,8 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Exportar todos los objetos como STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "¡El 3mf no es compatible, cargue solamente los datos de geometría!" +#~ msgid "The 3MF is not compatible, load geometry data only!" +#~ msgstr "¡El 3MF no es compatible, cargue solamente los datos de geometría!" #~ msgid "Incompatible 3mf" #~ msgstr "3mf Incompatible" @@ -17950,164 +23227,11 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "interior-exterior-interior/relleno" -#~ msgid "Export 3MF" -#~ msgstr "Exportar 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Exportar el proyecto como 3MF." - -#~ msgid "Export slicing data" -#~ msgstr "Exportar datos de laminado" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Exportar datos de laminado a una carpeta." - -#~ msgid "Load slicing data" -#~ msgstr "Cargar datos de laminado" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Cargar datos de laminado en caché desde el directorio" - -#~ msgid "Export STL" -#~ msgstr "Exportar STL" - #~ msgid "Export the objects as multiple STL." #~ msgstr "Exportar los objectos como multiples STL." -#~ msgid "Slice" -#~ msgstr "Laminar" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "" -#~ "Cortar las bandejas: 0-todas las bandejas, i-bandeja i, otras-inválidas" - -#~ msgid "Show command help." -#~ msgstr "Mostrar la ayuda del comando." - -#~ msgid "UpToDate" -#~ msgstr "Actualizado" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Actualice los valores de configuración de 3mf a la última versión." - -#~ msgid "Load default filaments" -#~ msgstr "Cargar los filamentos por defecto" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Carga el primer filamento por defecto para los no cargados" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "número máximo de triángulos por plato para laminar." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "tiempo máximo de corte por bandeja en segundos." - -#~ msgid "Normative check" -#~ msgstr "Comprobación de normativa" - -#~ msgid "Check the normative items." -#~ msgstr "Comprueba los elementos normativos." - -#~ msgid "Output Model Info" -#~ msgstr "Información del modelo de salida" - -#~ msgid "Output the model's information." -#~ msgstr "Salida de la información del modelo." - -#~ msgid "Export Settings" -#~ msgstr "Ajustes de exportación" - -#~ msgid "Export settings to a file." -#~ msgstr "Exporta los ajustes a un archivo." - -#~ msgid "Send progress to pipe" -#~ msgstr "Enviar el progreso a la tubería" - -#~ msgid "Send progress to pipe." -#~ msgstr "Enviar el progreso a la tubería." - -#~ msgid "Arrange Options" -#~ msgstr "Opciones de posicionamiento" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Opciones de posicionamiento: 0-desactivar, 1-activar, otras-auto" - -#~ msgid "Repetions count" -#~ msgstr "Cantidad de repeticiones" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Cantidad de repeticiones del modelo completo" - -#~ msgid "Convert Unit" -#~ msgstr "Convertir Unidad" - -#~ msgid "Convert the units of model" -#~ msgstr "Convertir las unidades del modelo" - -#~ msgid "Rotate around X" -#~ msgstr "Rotar alrededor de X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "El ángulo de rotación alrededor del eje X en grados." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Escala el modelo por un factor de flotación" - -#~ msgid "Load General Settings" -#~ msgstr "Cargar los ajustes generales" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "" -#~ "Cargar los ajustes del proceso/máquina desde el archivo especificado" - -#~ msgid "Load Filament Settings" -#~ msgstr "Cargar los ajustes del filamento" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "" -#~ "Cargar los ajustes del filamento desde la lista de archivos especificada" - -#~ msgid "Skip Objects" -#~ msgstr "Omitir objetos" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Omitir algunos objetos en esta impresión" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "" -#~ "carga los ajustes actualizados de proceso/máquina cuando se usa actualizar" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "carga los ajustes actualizados de proceso/máquina desde el archivo " -#~ "especificado cuando se usa actualizar" - -#~ msgid "Output directory" -#~ msgstr "Directorio de salida" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Directorio de salida para los archivos exportados." - -#~ msgid "Debug level" -#~ msgstr "Nivel de depuración" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" -#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" - #, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "El ajuste seleccionado: %1% no encontrado." #~ msgid "" @@ -18119,36 +23243,16 @@ msgstr "" #~ "¿Sabías cómo controlar la vista y la selección de objetos/partes con el " #~ "ratón y el panel táctil en la escena 3D?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Fijar modelo\n" -#~ "¿Sabías que puedes arreglar un modelo 3D dañado para evitar muchos " -#~ "problemas de corte?" - -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "Cuando es necesario imprimir con la puerta de la impresora abierta\n" -#~ "Abrir la puerta de la impresora puede reducir la probabilidad de atasco " -#~ "del extrusor/hotend al imprimir filamento de baja temperatura con una " -#~ "temperatura de carcasa más alta. Más información sobre esto en la Wiki." - #~ msgid "The minimum printing speed when slow down for cooling" #~ msgstr "" #~ "La velocidad mínima de impresión cuando se ralentiza para el refrigeración" -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Integrado" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "El archivo de configuración de Snapmaker Orca puede estar dañado y no puede " #~ "ser procesado. Por favor borre el archivo e inténtelo otra vez." @@ -18171,12 +23275,12 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" +#~ "automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same " #~ "brand, material type, and color)" #~ msgstr "" #~ "Actualmente no se dispone de consumibles de repuesto idénticos, por lo " -#~ "que la reposición automática no es posible. \n" +#~ "que la reposición automática no es posible.\n" #~ "(Actualmente admite el suministro automático de consumibles con la misma " #~ "marca, tipo de material y color)." @@ -18215,25 +23319,19 @@ msgstr "" #~ "funcionará a esta velocidad durante la impresión, excepto en las primeras " #~ "capas, que se define por la ausencia de capas de refrigeración" -#~ msgid "Cali" -#~ msgstr "Cali" - #~ msgid "Calibration of extrusion" #~ msgstr "Calibración de extrusión" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Push new filament into the extruder" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "La temperatura del lecho de la otra capa es inferior a la temperatura del " #~ "lecho de la primera capa durante más de %d grados centígrados.\n" #~ "Esto puede hacer que el modelo se desprenda de la bandeja durante la " -#~ "impresión" +#~ "impresión." #~ msgid "" #~ "Bed temperature is higher than vitrification temperature of this " @@ -18243,7 +23341,7 @@ msgstr "" #~ "circulation or reduce the temperature of the hot bed" #~ msgstr "" #~ "La temperatura de capa es superior que la temperatura de vitrificación de " -#~ "este filamento. \n" +#~ "este filamento.\n" #~ " Esto podría causar que la boquilla se bloquee y produzca un fallo de " #~ "impresión. Por favor, mantenga la impresora abierta durante el proceso " #~ "para garantizar la circulación de aire o reducir la temperatura de la " @@ -18255,15 +23353,6 @@ msgstr "" #~ msgid "Resonance frequency identification" #~ msgstr "Identificación de frecuencia de resonancia" -#~ msgid "Immediately score" -#~ msgstr "Immediately score" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Please give a score for your favorite Bambu Market model." - -#~ msgid "Score" -#~ msgstr "Score" - #~ msgid "Bambu High Temperature Plate" #~ msgstr "Bandeja de Alta Temperatura Bambú" @@ -18277,8 +23366,8 @@ msgstr "" #~ msgstr "Bandeja de Alta Temperatura" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Esta es la temperatura de la cama cuando la bandeja de alta temperatura " #~ "está instalada. Un valor de 0 significa que el filamento no admite la " @@ -18289,10 +23378,10 @@ msgstr "" #~ msgid "" #~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " +#~ "internal bridges. These support loops could prevent internal bridges from " #~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" +#~ "when the sparse infill density is low. This value determines the " +#~ "thickness of the support loops. 0 means disable this feature" #~ msgstr "" #~ "Si está activado, los bucles de soporte generarán debajo de los contornos " #~ "de puentes internos. Estos bucles de soporte pueden prevenir extruir " @@ -18301,12 +23390,6 @@ msgstr "" #~ "el grosor de los bucles de soporte. 0 significa deshabilitar esta " #~ "característica" -#, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "" -#~ "El max_accel_to_decel de Klipper se ajustará a este % o de aceleración" - #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " #~ "supports into a regular grid will create more stable supports (default), " @@ -18346,20 +23429,20 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Por favor, introduzca valores válidos:\n" #~ "inicio>paso 0 >= 0\n" -#~ "fin > inicio + paso)" +#~ "final > inicio + paso" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Por favor, introduzca valores válidos:\n" #~ "inicio > paso 10 >= 0\n" -#~ "final > inicio + paso)" +#~ "final > inicio + paso" #~ msgid "Send to print" #~ msgstr "Mandar a imprimir" @@ -18376,9 +23459,6 @@ msgstr "" #~ msgid "Set Printable" #~ msgstr "Hacer Imprimible" -#~ msgid "Ams filament backup" -#~ msgstr "Copia de Seguridad del Filamento AMS" - #~ msgid "Feed new filament from external spool" #~ msgstr "Cargar nuevo filamento en el carrete externo" @@ -18411,13 +23491,6 @@ msgstr "" #~ "No se ha encontrado el archivo de impresión, por favor, vuelva a " #~ "procesarlo" -#~ msgid "" -#~ "The print file exceeds the maximum allowable size (1GB). Please simplify " -#~ "the model and slice again" -#~ msgstr "" -#~ "El archivo de impresión supera el tamaño máximo permitido (1GB). Por " -#~ "favor, simplifique el modelo y vuelva a procesarlo" - #~ msgid "Failed uploading print file" #~ msgstr "Fallo al cargar el archivo de impresión" @@ -18430,7 +23503,7 @@ msgstr "" #~ msgid "No space left on Printer SD card" #~ msgstr "Sin espacio disponible en la tarjeta SD de la impresora" -#~ msgid "Sending gcode file through cloud service" +#~ msgid "Sending G-code file through cloud service" #~ msgstr "Enviando el archivo de G-Code a través del servicio en la nube" #~ msgid "Please log out and login to the printer again." @@ -18469,7 +23542,7 @@ msgstr "" #, c-format, boost-format #~ msgid "" -#~ "Disconnected from printer [%s] due to LAN mode disabled.Please reconnect " +#~ "Disconnected from printer [%s] due to LAN mode disabled. Please reconnect " #~ "the printer by logging in with your user account." #~ msgstr "" #~ "Desconectado de la impresora [%s] debido a modo de red deshabilitado. Por " @@ -18477,7 +23550,7 @@ msgstr "" #, c-format, boost-format #~ msgid "" -#~ "Disconnected from printer [%s] due to LAN mode enabled.Please reconnect " +#~ "Disconnected from printer [%s] due to LAN mode enabled. Please reconnect " #~ "the printer by inputting Access Code which can be gotten from printer " #~ "screen." #~ msgstr "" @@ -18506,7 +23579,7 @@ msgstr "" #~ msgstr "Versión interna" #~ msgid "" -#~ "BambuStudio will terminate because of running out of memory.It may be a " +#~ "BambuStudio will terminate because of running out of memory. It may be a " #~ "bug. It will be appreciated if you report the issue to our team." #~ msgstr "" #~ "BambuStudio terminará porque se está quedando sin memoria. Le " @@ -18527,7 +23600,7 @@ msgstr "" #~ msgid "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "El archivo de configuración de BambuStudio puede estar dañado y no puede " #~ "ser procesado." @@ -18535,8 +23608,8 @@ msgstr "" #~ msgid "The Bambu Studio needs an upgrade" #~ msgstr "Bambu Studio necesita una actualización" -#~ msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):" -#~ msgstr "Elija un archivo (gcode/.gco/.g/.ngc/ngc):" +#~ msgid "Choose one file (GCODE/.gco/.g/.ngc/ngc):" +#~ msgstr "Elija un archivo (GCODE/.gco/.g/.ngc/ngc):" #~ msgid "" #~ "The version of Bambu studio is too low and needs to be updated to the " @@ -18579,25 +23652,6 @@ msgstr "" #~ "comunidad, por lo que no podemos enumerarlas una por una, sino que se " #~ "atribuirán en los comentarios del código correspondientes." -#~ msgid "Layer Time (s)" -#~ msgstr "Layer Time (s)" - -#, c-format, boost-format -#~ msgid "" -#~ "Conflicts of gcode paths have been found at layer %d. Please separate the " -#~ "conflicted objects farther (%s <-> %s)." -#~ msgstr "" -#~ "Conflicts of gcode paths have been found at layer %d. Please separate the " -#~ "conflicting objects further (%s <-> %s)." - -#~ msgid "Report issue" -#~ msgstr "Report issue" - -#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only." -#~ msgstr "" -#~ "3mf generado con versión antigua de Bambu Studio, se cargan datos de " -#~ "geometría unicamente." - #~ msgid "" #~ "\"Fix Model\" feature is currently only on Windows. Please repair the " #~ "model on Bambu Studio(windows) or CAD softwares." @@ -18605,55 +23659,9 @@ msgstr "" #~ "Actualmente, la función «Fix Model» solo está disponible en Windows. " #~ "Repare el modelo en Bambu Studio (Windows) o en el software CAD." -#~ msgid "Associate files to BambuStudio" -#~ msgstr "Asociar archivos a BambuStudio" - -#~ msgid "Associate .3mf files to BambuStudio" -#~ msgstr "Asociar archivos .3mf a BambuStudio" - -#~ msgid "" -#~ "If enabled, sets BambuStudio as default application to open .3mf files" -#~ msgstr "" -#~ "Si se activa, ajusta BambuStudio como aplicación por defecto para abrir " -#~ "archivos .3mf" - -#~ msgid "Associate .stl files to BambuStudio" -#~ msgstr "Asociar archivos .stl a BambuStudio" - -#~ msgid "" -#~ "If enabled, sets BambuStudio as default application to open .stl files" -#~ msgstr "" -#~ "Si se activa, ajusta BambuStudio como aplicación por defecto para abrir " -#~ "archivos .stl" - -#~ msgid "Associate .step/.stp files to BambuStudio" -#~ msgstr "Asociar archivos .step/.stp a BambuStudio" - -#~ msgid "" -#~ "If enabled, sets BambuStudio as default application to open .step files" -#~ msgstr "" -#~ "Si se activa, ajusta BambuStudio como aplicación por defecto para abrir " -#~ "archivos .step" - -#~ msgid "Post-processing scripts" -#~ msgstr "Post-processing scripts" - -#~ msgid "Cool Plate / PLA Plate" -#~ msgstr "Cool Plate / PLA Plate" - -#~ msgid "" -#~ "The following object(s) have empty initial layer and can't be printed. " -#~ "Please Cut the bottom or enable supports." -#~ msgstr "" -#~ "The following object(s) have an empty initial layer and can't be printed. " -#~ "Please cut the bottom or enable supports." - #~ msgid "Bridge direction" #~ msgstr "Dirección del puente" -#~ msgid "Use only one wall on the first layer of model" -#~ msgstr "Use only one wall on the first layer of models" - #~ msgid "Max Radius" #~ msgstr "Radio máximo" @@ -18664,79 +23672,9 @@ msgstr "" #~ "Radio máximo de separación alrededor del extrusor. Se utiliza para evitar " #~ "colisiones en la impresión por objetos." -#~ msgid "Object flow ratio" -#~ msgstr "Object flow ratio" - -#~ msgid "The flow ratio set by object, the meaning is the same as flow ratio." -#~ msgstr "" -#~ "The flow ratio set by object; the meaning is the same as flow ratio." - -#~ msgid "Length of sparse infill anchor" -#~ msgstr "Length of sparse infill anchor" - -#~ msgid "" -#~ "Connect a sparse infill line to an internal perimeter with a short " -#~ "segment of an additional perimeter. If expressed as percentage (example: " -#~ "15%) it is calculated over sparse infill line width. Slicer tries to " -#~ "connect two close infill lines to a short perimeter segment. If no such " -#~ "perimeter segment shorter than infill_anchor_max is found, the infill " -#~ "line is connected to a perimeter segment at just one side and the length " -#~ "of the perimeter segment taken is limited to this parameter, but no " -#~ "longer than anchor_length_max. Set this parameter to zero to disable " -#~ "anchoring perimeters connected to a single infill line." -#~ msgstr "" -#~ "This connects a sparse infill line to an internal perimeter with a short " -#~ "segment of an additional perimeter. If expressed as percentage (example: " -#~ "15%) it is calculated over sparse infill line width. Bambu Studio tries " -#~ "to connect two close infill lines to a short perimeter segment. If no " -#~ "such perimeter segment shorter than infill_anchor_max is found, the " -#~ "infill line is connected to a perimeter segment at just one side and the " -#~ "length of the perimeter segment taken is limited to this parameter, but " -#~ "no longer than anchor_length_max. Set this parameter to zero to disable " -#~ "anchoring perimeters connected to a single infill line." - -#~ msgid "Maximum length of sparse infill anchor" -#~ msgstr "Maximum length of sparse infill anchor" - -#~ msgid "" -#~ "Connect a sparse infill line to an internal perimeter with a short " -#~ "segment of an additional perimeter. If expressed as percentage (example: " -#~ "15%) it is calculated over sparse infill line width. Slicer tries to " -#~ "connect two close infill lines to a short perimeter segment. If no such " -#~ "perimeter segment shorter than this parameter is found, the infill line " -#~ "is connected to a perimeter segment at just one side and the length of " -#~ "the perimeter segment taken is limited to infill_anchor, but no longer " -#~ "than this parameter. Set this parameter to zero to disable anchoring." -#~ msgstr "" -#~ "This connects a sparse infill line to an internal perimeter with a short " -#~ "segment of an additional perimeter. If expressed as percentage (example: " -#~ "15%) it is calculated over sparse infill line width. Bambu Studio tries " -#~ "to connect two close infill lines to a short perimeter segment. If no " -#~ "such perimeter segment shorter than this parameter is found, the infill " -#~ "line is connected to a perimeter segment at just one side and the length " -#~ "of the perimeter segment taken is limited to infill_anchor, but no longer " -#~ "than this parameter. Set this parameter to zero to disable anchoring." - -#~ msgid "0 (not anchored)" -#~ msgstr "0 (not anchored)" - -#~ msgid "" -#~ "If you want to process the output G-code through custom scripts, just " -#~ "list their absolute paths here. Separate multiple scripts with a " -#~ "semicolon. Scripts will be passed the absolute path to the G-code file as " -#~ "the first argument, and variables of settings also can be read" -#~ msgstr "" -#~ "If you want to process the output G-code through custom scripts, just " -#~ "list their absolute paths here. Separate multiple scripts with a " -#~ "semicolon. Scripts will be passed via the absolute path to the G-code " -#~ "file as the first argument, and variables of settings can also be read" - -#~ msgid "Z Hop Type" +#~ msgid "Z-Hop Type" #~ msgstr "Tipo de salto Z" -#~ msgid "The brim width around tree support. 0 means auto." -#~ msgstr "The brim width around tree support. 0 means auto." - #~ msgid "" #~ "Subtract a Part\n" #~ "Did you know that you can subtract one mesh from another using the " @@ -18762,9 +23700,6 @@ msgstr "" #~ "Bambu Studio admite el corte de archivos STEP, lo que proporciona " #~ "resultados más suaves que un archivo STL de menor resolución. ¡Pruébalo!" -#~ msgid "ERROR:" -#~ msgstr "ERROR:" - #~ msgid "Bed temperatures for the used filaments differ significantly." #~ msgstr "" #~ "Las temperaturas de la cama para los filamentos usados difieren bastante." @@ -18835,10 +23770,6 @@ msgstr "" #~ msgid "Export." #~ msgstr "Exportar." -#~ msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files." -#~ msgstr "" -#~ "Importación de datos geométricos desde archivos STL/STEP/3MF/OBJ/AMF." - #, boost-format #~ msgid "Copying directory %1% to %2% failed: %3%" #~ msgstr "La copia del directorio %1% a %2% ha fallado: %3%" @@ -18858,10 +23789,10 @@ msgstr "" #~ msgid "" #~ "Too large layer height.\n" -#~ "Reset to 0.2" +#~ "Reset to 0.2." #~ msgstr "" #~ "Altura de la capa demasiado grande.\n" -#~ "Reajustar a 0,2" +#~ "Reajustar a 0,2." #~ msgid "" #~ "\n" @@ -18883,7 +23814,7 @@ msgstr "" #~ msgstr "0%" #~ msgid "" -#~ "An object is layed over the boundary of plate.\n" +#~ "An object is laid over the plate boundaries.\n" #~ "Please solve the problem by moving it totally inside or outside plate." #~ msgstr "" #~ "Un objeto está colocado sobre el límite de la bandeja.\n" @@ -18899,15 +23830,6 @@ msgstr "" #~ msgid "Auto arrange" #~ msgstr "Auto posicionamiento" -#~ msgid "" -#~ "Auto orientates selected objects or all objects.If there are selected " -#~ "objects, it just orientates the selected ones.Otherwise, it will " -#~ "orientates all objects in the project." -#~ msgstr "" -#~ "Orienta automáticamente los objetos seleccionados o todos los objetos.Si " -#~ "hay objetos seleccionados, sólo orienta los seleccionados.En caso " -#~ "contrario, orienta todos los objetos del proyecto." - #~ msgid "Aux Cooling" #~ msgstr "Enfriamiento Auxiliar" @@ -18923,9 +23845,6 @@ msgstr "" #~ "este filamento.\n" #~ "Esto puede causar el bloqueo de la boquilla y el fracaso de la impresión" -#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):" -#~ msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):" - #~ msgid "Clear all" #~ msgstr "Borrar todo" @@ -18955,23 +23874,20 @@ msgstr "" #~ msgid "Ctrl + Left mouse button" #~ msgstr "Ctrl + Botón izquierdo del ratón" -#~ msgid "Debug" -#~ msgstr "Depurar" - #~ msgid "Designer" #~ msgstr "Diseñador" #~ msgid "Device:" #~ msgstr "Dispositivo:" -#~ msgid "Display printable box" -#~ msgstr "Caja de visualización imprimible " +#~ msgid "Display printable box." +#~ msgstr "Caja de visualización imprimible." -#~ msgid "Display shadow of objects" -#~ msgstr "Mostrar la sombra de los objetos" +#~ msgid "Display shadow of objects." +#~ msgstr "Mostrar la sombra de los objetos." -#~ msgid "Display triangles of models" -#~ msgstr "Mostrar los triángulos de los modelos" +#~ msgid "Display triangles of models." +#~ msgstr "Mostrar los triángulos de los modelos." #~ msgid "" #~ "Do not recommand bed temperature of other layer to be lower than initial " @@ -18984,20 +23900,20 @@ msgstr "" #~ "la bandeja de impresión." #~ msgid "" -#~ "Do you want to synchronize your personal data from Bambu Cloud? \n" +#~ "Do you want to synchronize your personal data from Bambu Cloud?\n" #~ "Contains the following information:\n" #~ "1. The Process presets\n" #~ "2. The Filament presets\n" #~ "3. The Printer presets\n" #~ msgstr "" -#~ "¿Quieres sincronizar tus datos personales desde Bambu Cloud? \n" +#~ "¿Quieres sincronizar tus datos personales desde Bambu Cloud?\n" #~ "Contiene la siguiente información:\n" #~ "1. Preajustes del proceso\n" #~ "2. Preajustese de filamentos\n" #~ "3. Preajustes de la impresora\n" #~ msgid "" -#~ "Do you want to synchronize your personal data from Bambu Cloud? \n" +#~ "Do you want to synchronize your personal data from Bambu Cloud?\n" #~ "It contains the following information:\n" #~ "1. The Process presets\n" #~ "2. The Filament presets\n" @@ -19083,7 +23999,7 @@ msgstr "" #~ msgid "" #~ "Force cooling fan to be specific speed when overhang degree of printed " -#~ "part exceeds this value. Expressed as percentage which indicides how much " +#~ "part exceeds this value. Expressed as percentage which indicates how much " #~ "width of the line without support from lower layer" #~ msgstr "" #~ "Fuerza al ventilador de refrigeración a una velocidad específica cuando " @@ -19150,7 +24066,7 @@ msgstr "" #~ msgid "" #~ "Maximum detour distance for avoiding crossing wall. Don't detour if the " -#~ "detour distance is large than this value" +#~ "detour distance is larger than this value" #~ msgstr "" #~ "Distancia máxima de desvío para evitar cruzar el muro. No se desvía si la " #~ "distancia de desvío es mayor que este valor" @@ -19198,7 +24114,7 @@ msgstr "" #~ msgstr "\n" #~ msgid "" -#~ "Please check the following infomation and click Confirm to continue " +#~ "Please check the following information and click Confirm to continue " #~ "sending print:\n" #~ msgstr "\n" @@ -19306,21 +24222,12 @@ msgstr "" #~ msgid "Spiral mode" #~ msgstr "Modo espiral" -#~ msgid "Successfully sent.Will automatically jump to the device page in %s s" +#~ msgid "" +#~ "Successfully sent. Will automatically jump to the device page in %s s" #~ msgstr "" #~ "Enviado con éxito. Saltará automáticamente a la página del dispositivo en " #~ "%s s" -#~ msgid "" -#~ "Support layer uses layer height independent with object layer. This is to " -#~ "support custom support gap,but may cause extra filament switches if " -#~ "support is specified as different extruder with object" -#~ msgstr "" -#~ "La capa de soporte utiliza la altura de la capa independientemente de la " -#~ "capa del objeto. Esto es para soportar la brecha de soporte " -#~ "personalizada, pero puede causar cambios de filamento adicionales si el " -#~ "soporte se especifica como un extrusor diferente con el objeto" - #~ msgid "" #~ "Switch to rectilinear pattern?\n" #~ "Yes - switch to rectilinear pattern automaticlly\n" @@ -19337,27 +24244,15 @@ msgstr "" #~ "No - restablecer automáticamente la densidad al valor por defecto que no " #~ "es del 100%.\n" -#~ msgid "Swith cloud environment, Please login again!" +#~ msgid "Swith cloud environment, please login again!" #~ msgstr "Cambiar el entorno de la nube, ¡Por favor, inicie sesión de nuevo!" -#~ msgid "" -#~ "The 3mf's version %s is newer than %s's version %s, Found following keys " -#~ "unrecognized:\n" -#~ msgstr "" -#~ "La versión %s de 3mf es más reciente que la versión %s de %s, se han " -#~ "encontrado las siguientes claves no reconocidas:\n" - -#~ msgid "" -#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade " -#~ "your software.\n" -#~ msgstr "\n" - -#~ msgid "The Config is not compatible and can not be loaded." +#~ msgid "The Config is not compatible and cannot be loaded." #~ msgstr "La configuración no es compatible y no se puede cargar." #~ msgid "" -#~ "The firmware versions of printer and AMS are too low.Please update to the " -#~ "latest version before sending the print job" +#~ "The firmware versions of printer and AMS are too low. Please update to " +#~ "the latest version before sending the print job" #~ msgstr "" #~ "Las versiones del firmware de la impresora y del AMS son demasiado " #~ "antiguas, por favor, actualice a la última versión antes de enviar el " @@ -19380,7 +24275,7 @@ msgstr "" #~ msgid "" #~ "This object will be used to purge the nozzle after a filament change to " -#~ "save filament and decrease the print time. Colours of the objects will be " +#~ "save filament and decrease the print time. Colors of the objects will be " #~ "mixed as a result" #~ msgstr "" #~ "Este objeto se utilizará para purgar la boquilla después de un cambio de " @@ -19413,15 +24308,12 @@ msgstr "" #~ msgstr "Esperando" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings after switching preset?" #~ msgstr "" -#~ "Has cambiado algunos ajustes de preajuste. \n" +#~ "Has cambiado algunos ajustes de preajuste.\n" #~ "¿Desea mantener estos ajustes cambiados después de cambiar de preajuste?" -#~ msgid "Zig zag" -#~ msgstr "Zig zag" - #~ msgid " Object:" #~ msgstr "Objeto" @@ -19435,57 +24327,25 @@ msgstr "" #~ " está demasiado cerca del área de exclusión, habrá colisiones al " #~ "imprimir.\n" -#~ msgid " is too close to others, there may be collisions when printing.\n" -#~ msgstr "\n" - #~ msgid " is too close to others, there will be collisions when printing.\n" #~ msgstr " está demasiado cerca de otros, habrá colisiones al imprimir.\n" #~ msgid "hybrid(auto)" #~ msgstr "híbrido(auto)" -#~ msgid "normal" -#~ msgstr "normal" - -#~ msgid "" -#~ "normal(auto) and tree(auto) is used to generate support automatically. If " -#~ "normal or tree is selected, only support enforcers are generated" -#~ msgstr "" -#~ "normal(auto) y tree(auto) se utiliza para generar soporte " -#~ "automáticamente. Si se selecciona normal o árbol, sólo se generan los " -#~ "soportes" - -#~ msgid "the 3mf is not compatible, load geometry data only!" -#~ msgstr "el 3mf no es compatible, ¡cargue sólo los datos geométricos!" +#~ msgid "the 3MF is not compatible, load geometry data only!" +#~ msgstr "el 3MF no es compatible, ¡cargue sólo los datos geométricos!" #~ msgid "tree" #~ msgstr "árbol" -#~ msgid "Pause Print" -#~ msgstr "Pause Print" - -#~ msgid "Edit Pause Print Message" -#~ msgstr "Edit Pause Print Message" - -#~ msgid "Delete Pause Print" -#~ msgstr "Delete Pause Print" - -#~ msgid "\\u2103" -#~ msgstr "\\ u2103" - -#~ msgid "mm\\u00B3" -#~ msgstr "mm\\ u00b3" - -#~ msgid "&Edit" -#~ msgstr "Editar" - #~ msgid "AMSMaterialsSetting" #~ msgstr "Configuración de materiales AMS" #~ msgid "AMS auto switch filament" #~ msgstr "Cambio automático de filamento AMS" -#~ msgid "AMS settings are not supported for external spool" +#~ msgid "AMS settings are not supported for external spool." #~ msgstr "" #~ "La configuración actual de AMS no admite el uso de una bobina externa." @@ -19511,9 +24371,6 @@ msgstr "" #~ "Esto puede provocar una disminución en la calidad de los voladizos al " #~ "imprimir rápidamente." -#~ msgid "Auto refill" -#~ msgstr "Auto refill" - #~ msgid "" #~ "Bed exclude area that can't used as printable area in X-Y plane. For " #~ "example, the bottom left area which is used to cut filament in X1 when " @@ -19558,7 +24415,7 @@ msgstr "" #~ "mejor)" #~ msgid "" -#~ "Disable overhang slowing down automatically? \n" +#~ "Disable overhang slowing down automatically?\n" #~ "Yes - Enable arachne and disable overhang slowing down\n" #~ "No - Give up using arachne this time" #~ msgstr "" @@ -19569,9 +24426,6 @@ msgstr "" #~ msgid "Downloading Bambu Network plug-in" #~ msgstr "Descargando el complemento Bambu Network" -#~ msgid "Edit plate setitngs" -#~ msgstr "Edit plate settings" - #~ msgid "" #~ "Extrusion compensation calibration is not supported when using Textured " #~ "PEI Plate" @@ -19586,9 +24440,6 @@ msgstr "" #~ "No se pudo conectar a la impresora a través de LAN. Introduzca la " #~ "dirección IP de la impresora y el código de acceso correctos." -#~ msgid "Failed to parse login report reason111" -#~ msgstr "Failed to parse login report reason" - #~ msgid "Failed uploading print file. Please enter ip address again." #~ msgstr "" #~ "Error al cargar el archivo de impresión. Vuelva a introducir la dirección " @@ -19626,17 +24477,11 @@ msgstr "" #~ msgid "" #~ "Filament to print support and raft. \"Default\" means no specific " -#~ "filament for support and current filament is used" +#~ "filament for support and current filament is used." #~ msgstr "" #~ "Filamento para imprimir soportes y balsas. «Predeterminado» significa que " #~ "no se utiliza un filamento específico como soporte y se utiliza un " -#~ "filamento actual" - -#~ msgid "Filaments Auto refill" -#~ msgstr "Filament Auto-refill" - -#~ msgid "G-code" -#~ msgstr "G-code" +#~ "filamento actual." #~ msgid "" #~ "Green represents that AMS humidity is normal, orange and red represent " @@ -19697,9 +24542,6 @@ msgstr "" #~ msgid "Modify" #~ msgstr "Modificar" -#~ msgid "NO AMS" -#~ msgstr "NO AMS" - #~ msgid "Not supported." #~ msgstr "No soportado" @@ -19717,17 +24559,11 @@ msgstr "" #~ msgid "Plate %d: %s does not support filament %s (%s)." #~ msgstr "Placa %d: %s no admite el filamento %s (%s)." -#~ msgid "Plate type" -#~ msgstr "Plate type" - -#~ msgid "Plate types supported by the printer" -#~ msgstr "Plate types supported by the printer" - #~ msgid "Please Fill Task Report." #~ msgstr "Por favor rellene el informe de tareas." #~ msgid "" -#~ "Please check the following infomation and click Confirm to continue " +#~ "Please check the following information and click Confirm to continue " #~ "sending print:" #~ msgstr "" #~ "Compruebe la siguiente información y haga clic en Confirmar para " @@ -19735,13 +24571,13 @@ msgstr "" #~ msgid "" #~ "Preview only mode:\n" -#~ "The loaded file contains gcode only." +#~ "The loaded file contains G-code only." #~ msgstr "" #~ "Modo de vista previa solamente:\n" -#~ "El archivo cargado sólo contiene gcode." +#~ "El archivo cargado sólo contiene G-code." -#~ msgid "Preview only mode for gcode file." -#~ msgstr "Modo de vista previa sólo para el archivo gcode." +#~ msgid "Preview only mode for G-code file." +#~ msgstr "Modo de vista previa sólo para el archivo G-code." #~ msgid "" #~ "Prime tower is required by timelapse. Do you want to enable both of them?" @@ -19765,9 +24601,6 @@ msgstr "" #~ msgid "Show Log" #~ msgstr "Mostrar registro" -#~ msgid "Spaghetti Detection" -#~ msgstr "Detección de hilos" - #~ msgid "Spaghetti and Excess Chute Pileup Detection" #~ msgstr "" #~ "Detección de hilos en la impresión y exceso de material de purga en el " @@ -19784,35 +24617,18 @@ msgstr "" #~ msgid "Stop printing when spaghetti detected" #~ msgstr "Detener la impresión cuando se detecten hilos" -#~ msgid "" -#~ "Successfully sent. Will automatically jump to the device page in %s s" -#~ msgstr "" -#~ "Enviado con éxito. Saltará automáticamente a la página del dispositivo en " -#~ "%s s" - #~ msgid "Suggestion: Actual Volume in range [%d, %d]" #~ msgstr "Sugerencia: Volumen real dentro del rango [%d, %d]" #~ msgid "Support base" #~ msgstr "Base de soporte" -#~ msgid "" -#~ "Support layer uses layer height independent with object layer. This is to " -#~ "support customizing z-gap and save print time." -#~ msgstr "" -#~ "La capa de soporte utiliza la altura de la capa independientemente de la " -#~ "capa de objetos. Esto es para permitir la personalización de z-gap y " -#~ "ahorrar tiempo de impresión." - #~ msgid "Sync material list from AMS" #~ msgstr "Sincronizar la lista de materiales de AMS" #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS" -#~ msgid "The 3mf is not from Bambu lab, load geometry data only." -#~ msgstr "El 3mf no es de Bambu lab, solo se cargaran datos de geometría." - #~ msgid "" #~ "The P1P printer does not support smooth timelapse, use traditional " #~ "timelapse instead." @@ -19832,9 +24648,9 @@ msgstr "" #~ "currently selected physical printer. It is recommend to re-slice by " #~ "selecting the same printer type." #~ msgstr "" -#~ "El tipo de impresora que se utiliza para generar el g-code no es el mismo " +#~ "El tipo de impresora que se utiliza para generar el G-code no es el mismo " #~ "que el de la impresora física actualmente seleccionada. Se recomienda " -#~ "volver a generar el g-code después de seleccionar el tipo de impresora " +#~ "volver a generar el G-code después de seleccionar el tipo de impresora " #~ "correcto." #~ msgid "" @@ -19869,16 +24685,9 @@ msgstr "" #~ "los puentes internos. 0 significa desactivar esta función" #~ msgid "" -#~ "When the current material run out,the printer will continue to print in " -#~ "the following order." -#~ msgstr "" -#~ "When the current material runs out, the printer will continue to print in " -#~ "the following order." - -#~ msgid "" -#~ "When using support material for the support interface, We recommend the " +#~ "When using support material for the support interface, we recommend the " #~ "following settings:\n" -#~ "0 top z distance, 0 interface spacing, concentric pattern." +#~ "0 top Z distance, 0 interface spacing, concentric pattern." #~ msgstr "" #~ "Al utilizar material de soporte para la interfaz de soporte, recomendamos " #~ "los siguientes ajustes:\n" @@ -19890,12 +24699,6 @@ msgstr "" #~ "Configuración general de X1: configuración de red en la barra lateral de " #~ "la pantalla principal del X1." -#~ msgid "" -#~ "You are going to delete %u files from printer. Are you sure to continue?" -#~ msgstr "" -#~ "You are going to delete %u files from the printer. Are you sure you want " -#~ "to continue?" - #~ msgid "(Sort)" #~ msgstr "Ordenar" @@ -19906,5 +24709,5 @@ msgstr "" #~ msgid "default value" #~ msgstr "Valor por defecto" -#~ msgid "preparing, export 3mf failed!" -#~ msgstr "Preparando; ¡Error al exportar 3MF!" +#~ msgid "preparing, export 3MF failed!" +#~ msgstr "Preparando; ¡Error al exportar 3MF!" \ No newline at end of file diff --git a/localization/i18n/fr/Snapmaker_Orca_fr.po b/localization/i18n/fr/Snapmaker_Orca_fr.po index 26a58f66e3..11ed422cea 100644 --- a/localization/i18n/fr/Snapmaker_Orca_fr.po +++ b/localization/i18n/fr/Snapmaker_Orca_fr.po @@ -2793,8 +2793,8 @@ msgstr "Snapmaker Orca est sous licence " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero Licence Publique Générale, version 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is Based on Snapmaker Orca" +msgstr "Snapmaker Orca is Based on Snapmaker Orca" msgid "Libraries" msgstr "Bibliothèques" diff --git a/localization/i18n/hu/Snapmaker_Orca_hu.po b/localization/i18n/hu/Snapmaker_Orca_hu.po index cd0c6f0372..f85497d1f3 100644 --- a/localization/i18n/hu/Snapmaker_Orca_hu.po +++ b/localization/i18n/hu/Snapmaker_Orca_hu.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -11,11 +11,121 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" "X-Generator: Localazy (https://localazy.com)\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "Az AMS nem támogatja a TPU-t." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"A nedves PVA rugalmassá válik és elakadhat az AMS belsejében; kérjük, " +"használat előtt alaposan szárítsd ki." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"A CF/GF filament rideg és törékeny, ezért könnyen eltörhet vagy elakadhat az " +"AMS-ben; kérjük, légy körültekintő a használatakor." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Hőmérséklet" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Tétlen" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Sorozatszám:" + +msgid "Version:" +msgstr "Verzió:" + +msgid "Latest version" +msgstr "Legfrissebb verzió" + +msgid "Support Painting" msgstr "Támaszok festése" -msgid "Alt + Mouse wheel" -msgstr "Alt + Egérgörgő" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Egérgörgő" msgid "Section view" msgstr "Keresztmetszet nézet" @@ -23,9 +133,6 @@ msgstr "Keresztmetszet nézet" msgid "Reset direction" msgstr "Irány visszaállítása" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Egérgörgő" - msgid "Pen size" msgstr "Tollméret" @@ -41,9 +148,6 @@ msgstr "Jobb egérgomb" msgid "Block supports" msgstr "Támaszok blokkolása" -msgid "Shift + Left mouse button" -msgstr "Shift + bal egérgomb" - msgid "Erase" msgstr "Törlés" @@ -100,14 +204,14 @@ msgid "Support Generated" msgstr "Támasz legenerálva" msgid "Gizmo-Place on Face" -msgstr "Gizmo- Felület Tárgyasztalra Illesztése" +msgstr "Gizmo-Felület Tárgyasztalra Illesztése" msgid "Lay on face" msgstr "Felületre fektetés" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "A filamentek száma meghaladja a festés által támogatott maximális " @@ -149,12 +253,21 @@ msgstr "Vödör kitöltés" msgid "Height range" msgstr "Magasságtartomány" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "Drótváz-megjelenítés váltása" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Mégse" + msgid "Shortcut Key " msgstr "Gyorsgomb " @@ -177,17 +290,41 @@ msgstr "Festett szín eltávolítása" msgid "Painted using: Filament %1%" msgstr "A következővel festve: %1% filament" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Ecset mérete" + +msgid "Brush shape" +msgstr "Ecset alakja" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Mozgatás" +msgid "Please select at least one object." +msgstr "" + msgid "Gizmo-Move" -msgstr "Gizmo-Mozgatása" +msgstr "Gizmo-Mozgatás" msgid "Rotate" msgstr "Forgatás" msgid "Gizmo-Rotate" -msgstr "Gizmo-Forgatása" +msgstr "Gizmo-Forgatás" msgid "Optimize orientation" msgstr "Orientáció optimalizálása" @@ -199,7 +336,7 @@ msgid "Scale" msgstr "Átméretezés" msgid "Gizmo-Scale" -msgstr "Gizmo-Skála" +msgstr "Gizmo-Átméretezés" msgid "Error: Please close all toolbar menus first" msgstr "Hiba: Kérjük, először zárd be az összes eszköztár menüt" @@ -210,14 +347,20 @@ msgstr "in" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Pozíció" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Forgatás" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Méretarányok" @@ -234,9 +377,6 @@ msgstr "Fordítás" msgid "Group Operations" msgstr "Csoportos műveletek" -msgid "Set Position" -msgstr "Pozíció beállítása" - msgid "Set Orientation" msgstr "Orientáció beállítása" @@ -249,22 +389,31 @@ msgstr "Pozíció visszaállítása" msgid "Reset Rotation" msgstr "Forgatás visszaállítása" -msgid "World coordinates" -msgstr "Világkoordináták" - msgid "Object coordinates" msgstr "" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Világkoordináták" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Méret" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "egységes méretarány" @@ -281,10 +430,10 @@ msgid "Manual" msgstr "Manuális" msgid "Plug" -msgstr "Plug" +msgstr "" msgid "Dowel" -msgstr "Dowel" +msgstr "" msgid "Snap" msgstr "Csatlakoztatás" @@ -296,22 +445,22 @@ msgid "Frustum" msgstr "Frustum" msgid "Square" -msgstr "Square" +msgstr "" msgid "Hexagon" -msgstr "Hexagon" +msgstr "" msgid "Keep orientation" msgstr "Tájolás megtartása" msgid "Place on cut" -msgstr "Place on cut" +msgstr "" msgid "Flip upside down" msgstr "" msgid "Connectors" -msgstr "Connectors" +msgstr "" msgid "Type" msgstr "Típus" @@ -328,6 +477,12 @@ msgstr "Forma" msgid "Depth" msgstr "Mélység" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Forgatás" + msgid "Groove" msgstr "Horony" @@ -367,7 +522,7 @@ msgid "Change cut mode" msgstr "" msgid "Tolerance" -msgstr "Tolerance" +msgstr "" msgid "Drag" msgstr "Drag" @@ -376,28 +531,28 @@ msgid "Draw cut line" msgstr "" msgid "Left click" -msgstr "Left click" +msgstr "" msgid "Add connector" -msgstr "Add connector" +msgstr "" msgid "Right click" -msgstr "Right click" +msgstr "" msgid "Remove connector" -msgstr "Remove connector" +msgstr "" msgid "Move connector" -msgstr "Move connector" +msgstr "" msgid "Add connector to selection" -msgstr "Add connector to selection" +msgstr "" msgid "Remove connector from selection" -msgstr "Remove connector from selection" +msgstr "" msgid "Select all connectors" -msgstr "Select all connectors" +msgstr "" msgid "Cut" msgstr "Vágás" @@ -406,7 +561,7 @@ msgid "Rotate cut plane" msgstr "" msgid "Remove connectors" -msgstr "Remove connectors" +msgstr "" msgid "Bulge" msgstr "Kidudorodás" @@ -421,10 +576,7 @@ msgid "Space proportion related to radius" msgstr "" msgid "Confirm connectors" -msgstr "Confirm connectors" - -msgid "Cancel" -msgstr "Mégse" +msgstr "" msgid "Build Volume" msgstr "" @@ -449,10 +601,10 @@ msgid "Reset cutting plane" msgstr "" msgid "Edit connectors" -msgstr "Edit connectors" +msgstr "" msgid "Add connectors" -msgstr "Add connectors" +msgstr "" msgid "Reset cut" msgstr "" @@ -461,10 +613,10 @@ msgid "Reset cutting plane and remove connectors" msgstr "" msgid "Upper part" -msgstr "Upper part" +msgstr "" msgid "Lower part" -msgstr "Lower part" +msgstr "" msgid "Keep" msgstr "Keep" @@ -473,7 +625,7 @@ msgid "Flip" msgstr "Flip" msgid "After cut" -msgstr "After cut" +msgstr "" msgid "Cut to parts" msgstr "Részekre darabolás" @@ -485,7 +637,7 @@ msgid "Warning" msgstr "Figyelmeztetés" msgid "Invalid connectors detected" -msgstr "Invalid connectors detected" +msgstr "" #, c-format, boost-format msgid "%1$d connector is out of cut contour" @@ -500,7 +652,7 @@ msgstr[0] "" msgstr[1] "" msgid "Some connectors are overlapped" -msgstr "Some connectors are overlapped" +msgstr "" msgid "Select at least one object to keep after cutting." msgstr "" @@ -582,14 +734,10 @@ msgstr "%d háromszög" msgid "Show wireframe" msgstr "Drótváz megjelenítése" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Nem használható folyamat előnézetben." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "" "A művelet törlése már folyamatban van. Kérjük, várj néhány másodpercet." @@ -599,12 +747,6 @@ msgstr "Arcfelismerés" msgid "Perform Recognition" msgstr "Felismerés" -msgid "Brush size" -msgstr "Ecset mérete" - -msgid "Brush shape" -msgstr "Ecset alakja" - msgid "Enforce seam" msgstr "Varrat kényszerítése" @@ -635,30 +777,30 @@ msgid "Thickness" msgstr "Vastagság" msgid "Text Gap" -msgstr "Text Gap" +msgstr "" msgid "Angle" -msgstr "Angle" +msgstr "" msgid "" -"Embeded\n" +"Embedded\n" "depth" -msgstr "Embedded depth" +msgstr "" msgid "Input text" msgstr "Szöveg" msgid "Surface" -msgstr "Surface" +msgstr "" msgid "Horizontal text" -msgstr "Horizontal text" +msgstr "" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mouse move up or down" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" -msgstr "Rotate text" +msgstr "" msgid "Text shape" msgstr "Szöveg alakja" @@ -778,7 +920,7 @@ msgid "Change Text Type" msgstr "" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "" msgid "Name can't be empty." @@ -967,7 +1109,7 @@ msgstr "" msgid "Undo rotation" msgstr "" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -985,10 +1127,14 @@ msgstr "" msgid "Orient the text towards the camera." msgstr "" +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" msgid "No symbol" @@ -1101,11 +1247,11 @@ msgstr "" msgid "Undefined stroke type" msgstr "" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" @@ -1113,7 +1259,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1143,7 +1289,7 @@ msgstr "" msgid "Change file" msgstr "" -msgid "Change to another .svg file" +msgid "Change to another SVG file." msgstr "" msgid "Forget the file path" @@ -1168,7 +1314,7 @@ msgstr "Mentés Másként" msgid "Save SVG file" msgstr "" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "" msgid "Size in emboss direction." @@ -1189,7 +1335,7 @@ msgid "Lock/unlock the aspect ratio of the SVG." msgstr "" msgid "Reset scale" -msgstr "Skála visszaállítása" +msgstr "Méretezés visszaállítása" msgid "Distance of the center of the SVG to the model surface." msgstr "" @@ -1236,60 +1382,64 @@ msgstr "" msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "" +msgid "No feature" +msgstr "" + msgid "Vertex" -msgstr "Vertex" +msgstr "" msgid "Edge" -msgstr "Edge" +msgstr "" msgid "Plane" -msgstr "Plane" +msgstr "" msgid "Point on edge" -msgstr "Point on edge" +msgstr "" msgid "Point on circle" -msgstr "Point on circle" +msgstr "" msgid "Point on plane" -msgstr "Point on plane" +msgstr "" msgid "Center of edge" -msgstr "Center of edge" +msgstr "" msgid "Center of circle" -msgstr "Center of circle" - -msgid "ShiftLeft mouse button" msgstr "" msgid "Select feature" -msgstr "Select feature" +msgstr "" msgid "Select point" -msgstr "Select point" +msgstr "" msgid "Delete" msgstr "Törlés" msgid "Restart selection" -msgstr "Restart selection" +msgstr "" msgid "Esc" msgstr "Esc" -msgid "Unselect" +msgid "Cancel a feature until exit" msgstr "" msgid "Measure" -msgstr "Measure" +msgstr "Mérés" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" msgid "Edit to scale" -msgstr "Edit to scale" +msgstr "" msgctxt "Verb" -msgid "Scale" -msgstr "Átméretezés" +msgid "Scale all" +msgstr "" msgid "None" msgstr "Sehol" @@ -1301,25 +1451,79 @@ msgid "Length" msgstr "Hossz" msgid "Selection" -msgstr "Selection" +msgstr "" + +msgid " (Moving)" +msgstr "" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" + +msgid "Face" +msgstr "Face" + +msgid " (Fixed)" +msgstr " (Fixed)" + +msgid "Point" +msgstr "Point" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" + +msgid "Warning: please select Plane's feature." +msgstr "" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" + +msgid "Warning: please select two different meshes." +msgstr "" msgid "Copy to clipboard" msgstr "Másolás a vágólapra" msgid "Perpendicular distance" -msgstr "Perpendicular distance" +msgstr "" msgid "Distance" -msgstr "Distance" +msgstr "" msgid "Direct distance" -msgstr "Direct distance" +msgstr "" msgid "Distance XYZ" -msgstr "Distance XYZ" +msgstr "" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "" + +msgid "Center coincidence" +msgstr "" + +msgid "Feature 1" +msgstr "Feature 1" + +msgid "Reverse rotation" +msgstr "" + +msgid "Rotate around center:" +msgstr "" + +msgid "Parallel distance:" +msgstr "" + +msgid "Flip by Face 2" +msgstr "" msgid "Notice" msgstr "Megjegyzés" @@ -1358,8 +1562,11 @@ msgstr "" "A(z) \"%1%\" konfigurációs csomag betöltődött, de néhány értéket nem " "sikerült felismerni." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" @@ -1403,6 +1610,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1446,27 +1657,27 @@ msgstr "Jelenlegi beállítások betöltése" msgid "Loading a mode view" msgstr "Mód nézet betöltése" -msgid "Choose one file (3mf):" -msgstr "Válassz ki egy fájlt (3mf):" +msgid "Choose one file (3MF):" +msgstr "Válassz ki egy fájlt (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Válassz ki egy vagy több fájlt (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Válassz ki egy vagy több fájlt (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Válassz ki egy vagy több fájlt (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "" -msgid "Choose one file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" msgstr "" msgid "Some presets are modified." msgstr "Néhány beállítás megváltozott." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Megtarthatod az új projekt módosított beállításait, elvetheted őket, vagy " @@ -1484,13 +1695,13 @@ msgstr "Projekt megnyitása" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "A Snapmaker Orca ezen verziója túl régi és a legfrissebb verzióra kell " "frissíteni, mielőtt rendesen használható lenne" msgid "Privacy Policy Update" -msgstr "Privacy Policy Update" +msgstr "" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " @@ -1535,16 +1746,16 @@ msgid "" msgstr "" msgid "Import File" -msgstr "Import File" +msgstr "" msgid "Choose files" msgstr "Fájlok kiválasztása" msgid "New Folder" -msgstr "New Folder" +msgstr "" msgid "Open" -msgstr "Open" +msgstr "" msgid "Rename" msgstr "Átnevezés" @@ -1553,7 +1764,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Nem sikerült a Snapmaker Orca GUI inicializálása" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Súlyos hiba, a következő kivételt találtuk: %1%" msgid "Quality" @@ -1583,12 +1794,18 @@ msgstr "Felső tömör rétegek" msgid "Top Minimum Shell Thickness" msgstr "Minimális fedőréteg vastagság" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "Alsó tömör rétegek" msgid "Bottom Minimum Shell Thickness" msgstr "Alsó minimális héjvastagság" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Vasalás" @@ -1655,6 +1872,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "Kiválasztott objektum törlése" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Betöltés..." @@ -1676,6 +1896,9 @@ msgstr "Tórusz" msgid "Orca Cube" msgstr "" +msgid "Orca Tolerance Test" +msgstr "" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1693,7 +1916,7 @@ msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1703,7 +1926,7 @@ msgid "Text" msgstr "" msgid "Height range Modifier" -msgstr "Height Range Modifier" +msgstr "" msgid "Add settings" msgstr "Beállítások hozzáadása" @@ -1718,10 +1941,10 @@ msgid "Set as individual objects" msgstr "Beállítás különálló objektumokként" msgid "Fill bed with copies" -msgstr "Fill bed with copies" +msgstr "" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "Fill the remaining area of bed with copies of the selected object" +msgstr "" msgid "Printable" msgstr "Nyomtatható" @@ -1747,6 +1970,12 @@ msgstr "Lecserélés STL-lel" msgid "Replace the selected part with new STL" msgstr "Lecseréli a kijelölt tárgyat egy új STL-lel" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Filament csere" @@ -1784,16 +2013,16 @@ msgstr "Öblítés a tárgyak támaszába" msgid "Edit in Parameter Table" msgstr "Szerkesztés a paramétertáblában" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Átváltás hüvelykről" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Visszaállítás hüvelykre" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Átváltás méterről" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Visszaállítás méterre" msgid "Assemble" @@ -1807,12 +2036,12 @@ msgstr "" "Összeállítja a kijelölt objektumokat egy egyetlen részből álló objektummá" msgid "Mesh boolean" -msgstr "Mesh boolean" +msgstr "Modellháló logikai műveletek" msgid "Mesh boolean operations including union and subtraction" msgstr "" -"Olyan modellhálóval kapcsolatos logikai műveletek, mint például az egyesítés " -"és kivonás" +"Modellhálóval kapcsolatos logikai műveletek, mint például az egyesítés és " +"kivonás" msgid "Along X axis" msgstr "X-tengely mentén" @@ -1848,7 +2077,7 @@ msgid "Change SVG source file, projection, size, ..." msgstr "" msgid "Invalidate cut info" -msgstr "Invalidate cut info" +msgstr "" msgid "Add Primitive" msgstr "Primitív hozzáadása" @@ -1883,10 +2112,19 @@ msgstr "Szétválasztja a kijelölt objektumot" msgid "Auto orientation" msgstr "Automatikus orientáció" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "" "Az objektum automatikus tájolása a nyomtatási minőség javítása érdekében." +msgid "Edit" +msgstr "Szerkesztés" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Összes kijelölése" @@ -1918,11 +2156,35 @@ msgid "auto rotate current plate" msgstr "aktuális tálca automatikus forgatása" msgid "Delete Plate" -msgstr "Delete Plate" +msgstr "" msgid "Remove the selected plate" msgstr "Kiválasztott tálca eltávolítása" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Klónozás" @@ -1932,9 +2194,18 @@ msgstr "Modell egyszerűsítése" msgid "Center" msgstr "Közép" +msgid "Drop" +msgstr "" + msgid "Edit Process Settings" msgstr "Folyamatbeállítások szerkesztése" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Nyomtatási paraméterek szerkesztése egy objektumhoz" @@ -1980,8 +2251,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d hibás él" msgstr[1] "%1$d hibás él" -msgid "Right click the icon to fix model object" -msgstr "Kattints jobb gombbal az ikonra a modell objektum javításához" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "Kattints jobb gombbal az ikonra az objektum beállításainak elvetéséhez" @@ -2005,7 +2276,7 @@ msgid "Click the icon to edit color painting of the object" msgstr "Kattints az ikonra az objektum színfestésének szerkesztéséhez" msgid "Click the icon to shift this object to the bed" -msgstr "Click the icon to shift this object to the bed" +msgstr "" msgid "Loading file" msgstr "Fájl betöltése" @@ -2034,78 +2305,72 @@ msgstr "" "Válts át objektumonkénti beállítás módba a kiválasztott objektumok " "folyamatbeállításainak szerkesztéséhez." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" -msgstr "Delete connector from object which is a part of cut" +msgstr "" msgid "Delete solid part from object which is a part of cut" -msgstr "Delete solid part from object which is a part of cut" +msgstr "" msgid "Delete negative volume from object which is a part of cut" -msgstr "Delete negative volume from object which is a part of cut" +msgstr "" msgid "" "To save cut correspondence you can delete all connectors from all related " "objects." msgstr "" -"To save cut correspondence you can delete all connectors from all related " -"objects." msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." -msgstr "" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " "cut information first." +msgstr "" msgid "Delete all connectors" -msgstr "Delete all connectors" +msgstr "" msgid "Deleting the last solid part is not allowed." msgstr "Az utolsó szilárd rész törlése nem megengedett." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "" -"A kijelölt objektum csak egy tárgyat tartalmaz, ezért nem lehet tovább " -"bontani." msgid "Assembly" msgstr "Összeállítás" msgid "Cut Connectors information" -msgstr "Cut Connectors information" +msgstr "" msgid "Object manipulation" -msgstr "Object manipulation" +msgstr "" msgid "Group manipulation" -msgstr "Group manipulation" +msgstr "" msgid "Object Settings to modify" -msgstr "Object Settings to Modify" +msgstr "" msgid "Part Settings to modify" -msgstr "Part Settings to Modify" +msgstr "" msgid "Layer range Settings to modify" -msgstr "Layer Range Settings to Modify" +msgstr "" msgid "Part manipulation" -msgstr "Part manipulation" +msgstr "" msgid "Instance manipulation" -msgstr "Instance manipulation" +msgstr "" msgid "Height ranges" -msgstr "Height ranges" +msgstr "" msgid "Settings for height range" -msgstr "Settings for height range" +msgstr "" msgid "Layer" msgstr "Réteg" @@ -2114,14 +2379,14 @@ msgid "Selection conflicts" msgstr "Kijelölési ütközések" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Ha az első kiválasztott elem egy objektum, akkor a másodiknak is objektumnak " "kell lennie." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Ha az első kiválasztott elem egy tárgy, akkor a másodiknak is tárgynak kell " "lennie." @@ -2173,10 +2438,10 @@ msgid "to" msgstr "eddig" msgid "Remove height range" -msgstr "Remove height range" +msgstr "" msgid "Add height range" -msgstr "Add height range" +msgstr "" msgid "Invalid numeric." msgstr "Érvénytelen számjegy." @@ -2186,7 +2451,7 @@ msgstr "" "egy cellát csak az ugyanabban az oszlopban lévő egy vagy több cellába lehet " "másolni" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "a több cellás másolás nem támogatott" msgid "Outside" @@ -2207,14 +2472,17 @@ msgstr "Automatikus perem" msgid "Mouse ear" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" -msgstr "Outer brim only" +msgstr "" msgid "Inner brim only" -msgstr "Inner brim only" +msgstr "" msgid "Outer and inner brim" -msgstr "Outer and inner brim" +msgstr "" msgid "No-brim" msgstr "Nincs perem" @@ -2265,13 +2533,13 @@ msgid "Custom" msgstr "Egyéni" msgid "Pause:" -msgstr "Pause:" +msgstr "" msgid "Custom Template:" -msgstr "Custom Template:" +msgstr "" msgid "Custom G-code:" -msgstr "Custom G-code:" +msgstr "" msgid "Custom G-code" msgstr "Egyedi G-kód" @@ -2289,40 +2557,40 @@ msgid "Add Pause" msgstr "Szünet hozzáadása" msgid "Insert a pause command at the beginning of this layer." -msgstr "Insert a pause command at the beginning of this layer." +msgstr "" msgid "Add Custom G-code" msgstr "Egyedi G-kód hozzáadása" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Insert custom G-code at the beginning of this layer." +msgstr "" msgid "Add Custom Template" msgstr "Egyéni sablon hozzáadása" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "Insert template custom G-code at the beginning of this layer." +msgstr "" msgid "Filament " msgstr "Filament " msgid "Change filament at the beginning of this layer." -msgstr "Change filament at the beginning of this layer." +msgstr "" msgid "Delete Pause" msgstr "Szünet törlése" msgid "Delete Custom Template" -msgstr "Delete Custom Template" +msgstr "" msgid "Edit Custom G-code" -msgstr "Edit Custom G-code" +msgstr "" msgid "Delete Custom G-code" -msgstr "Delete Custom G-code" +msgstr "" msgid "Delete Filament Change" -msgstr "Delete Filament Change" +msgstr "" msgid "No printer" msgstr "Nincs nyomtató" @@ -2334,78 +2602,156 @@ msgid "Failed to connect to the server" msgstr "Nem sikerült csatlakozni a szerverhez" msgid "Check the status of current system services" -msgstr "Check the status of current system services" +msgstr "" msgid "code" -msgstr "code" +msgstr "" msgid "Failed to connect to cloud service" -msgstr "Failed to connect to cloud service" +msgstr "" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Please click on the hyperlink above to view the cloud service status" +msgstr "" msgid "Failed to connect to the printer" msgstr "Nem sikerült csatlakozni a nyomtatóhoz" msgid "Connection to printer failed" -msgstr "Connection to printer failed" +msgstr "" msgid "Please check the network connection of the printer and Orca." -msgstr "Please check the network connection of the printer and Orca." +msgstr "" msgid "Connecting..." msgstr "Csatlakozás..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Üres" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Refill" - -msgid "AMS not connected" -msgstr "Az AMS nincs csatlakoztatva" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "" msgid "Unload" msgstr "Kitöltés" -msgid "Ext Spool" -msgstr "Kül. tekercs" - -msgid "Tips" -msgstr "Tippek" - -msgid "Guide" -msgstr "Útmutató" - -msgid "Retry" -msgstr "Újra" - -msgid "Calibrating AMS..." -msgstr "AMS kalibrálása..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"A kalibráció során probléma merült fel. Kattintson a megoldás " -"megtekintéséhez." +"Válassz ki egy AMS-helyet, majd nyomd meg a „Betöltés” vagy a „Kitöltés” " +"gombot az filament automatikus betöltéséhez vagy eltávolításához." -msgid "Calibrate again" -msgstr "Kalibrálja újra" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "Kalibrálás megszakítása" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Szűrő" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Hűtés" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Felül" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "Tétlen..." @@ -2422,44 +2768,37 @@ msgstr "Jelenlegi filament visszahúzása" msgid "Push new filament into extruder" msgstr "Új filament betöltése az extruderbe" +msgid "Grab new filament" +msgstr "" + msgid "Purge old filament" msgstr "Régi filament kiöblítése" -msgid "Feed Filament" -msgstr "Filament betöltése" - msgid "Confirm extruded" msgstr "Extrudálás megerősítése" msgid "Check filament location" msgstr "Ellenőrizd a filament helyzetét" -msgid "Grab new filament" -msgstr "Grab new filament" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Válassz ki egy AMS-helyet, majd nyomd meg a „Betöltés” vagy a „Kitöltés” " -"gombot az filament automatikus betöltéséhez vagy eltávolításához." -msgid "Edit" -msgstr "Szerkesztés" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Az összes kijelölt objektum egy zárolt tálcán van,\n" "nem lehet automatikus elrendezést használni rajtuk." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Nincsenek elrendezhető objektumok kijelölve." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Ez a tálca zárolva van.\n" "Nem lehetséges az automatikus elrendezés ezen a tálcán." @@ -2499,15 +2838,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Az összes kijelölt objektum egy zárolt tálcán van,\n" "nem lehet automatikus orientációt használni rajtuk." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Ez a tálca zárolva van.\n" "Nem lehetséges az automatikus orientáció ezen a tálcán." @@ -2525,10 +2864,10 @@ msgid "Filling" msgstr "Kitöltés" msgid "Bed filling canceled." -msgstr "Bed filling canceled." +msgstr "" msgid "Bed filling done." -msgstr "Bed filling done." +msgstr "" msgid "Searching for optimal orientation" msgstr "Az optimális tájolás keresése" @@ -2549,56 +2888,48 @@ msgid "Please check the printer network connection." msgstr "Kérjük, ellenőrizd a nyomtató hálózati kapcsolatát." msgid "Abnormal print file data. Please slice again." -msgstr "Abnormal print file data: please slice again." +msgstr "" msgid "Task canceled." -msgstr "Task canceled." +msgstr "" msgid "Upload task timed out. Please check the network status and try again." -msgstr "Upload task timed out. Please check the network status and try again." +msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "" "A felhőszolgáltatáshoz való csatlakozás sikertelen. Kérjük, próbáld újra." -msgid "Print file not found. please slice again." -msgstr "Print file not found; please slice again." +msgid "Print file not found. Please slice again." +msgstr "" msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." msgid "Failed to send the print job. Please try again." msgstr "Nem sikerült elküldeni a nyomtatási feladatot. Kérlek próbáld újra." msgid "Failed to upload file to ftp. Please try again." -msgstr "Failed to upload file to ftp. Please try again." +msgstr "" msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Check the current status of the Bambu Lab server by clicking on the link " -"above." msgid "" "The size of the print file is too large. Please adjust the file size and try " "again." msgstr "" -"The size of the print file is too large. Please adjust the file size and try " -"again." -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "Print file not found; please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." +msgstr "" msgid "" "Failed to upload print file to FTP. Please check the network status and try " "again." msgstr "" -"Failed to upload print file via FTP. Please check the network status and try " -"again." msgid "Sending print job over LAN" msgstr "Nyomtatási munka küldése LAN-on keresztül" @@ -2628,50 +2959,83 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Sikeresen elküldve. Ugrás automatikusan a következő oldalra %s mp-en belül" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "G-kód fájl küldése LAN-on keresztül" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "G-kód fájl küldése MicroSD-kártyára" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Sikeresen elküldve. Az oldal bezárul %s mp-en belül" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "A nyomtatóra való küldés előtt be kell helyezned egy MicroSD-kártyát." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" -msgstr "Importing SLA archive" +msgstr "" msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer presets first before importing that SLA archive." msgid "Importing canceled." -msgstr "Importing canceled." +msgstr "" msgid "Importing done." -msgstr "Importing done." +msgstr "" msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "You cannot load an SLA project with a multi-part object on the bed" +msgstr "" msgid "Please check your object list before preset changing." -msgstr "Please check your object list before preset changing." +msgstr "" msgid "Attention!" msgstr "Figyelem!" @@ -2682,10 +3046,10 @@ msgstr "Letöltés" msgid "Download failed" msgstr "Letöltés sikertelen" -msgid "Cancelled" +msgid "Canceled" msgstr "Megszakítva" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Sikeresen telepítve" msgid "Installing" @@ -2707,9 +3071,9 @@ msgid "Snapmaker Orca is licensed under " msgstr "A Snapmaker Orca a következő licencet használja " msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, version 3" +msgstr "" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2726,9 +3090,6 @@ msgstr "" msgid "About %s" msgstr "%s névjegye" -msgid "Snapmaker Orca " -msgstr "" - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" @@ -2758,9 +3119,6 @@ msgstr "Megerősítés" msgid "Close" msgstr "Bezárás" -msgid "Colour" -msgstr "Szín" - msgid "" "Nozzle\n" "Temperature" @@ -2782,9 +3140,6 @@ msgstr "" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "Nyomtatás közben nem változtathatóak meg a AMS férőhelyek adatai" - msgid "Factors of Flow Dynamics Calibration" msgstr "Anyagáramlás kalibrálásának faktorai" @@ -2797,14 +3152,17 @@ msgstr "K-tényező" msgid "Factor N" msgstr "N-tényező" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Nyomtatás közben nem változtathatóak meg a AMS férőhelyek adatai" + msgid "Setting Virtual slot information while printing is not supported" -msgstr "Setting Virtual slot information while printing is not supported" +msgstr "" msgid "Are you sure you want to clear the filament information?" -msgstr "Are you sure you want to clear the filament information?" +msgstr "" msgid "You need to select the material type and color first." -msgstr "You need to select the material type and color first." +msgstr "" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" @@ -2814,11 +3172,20 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" -msgstr "Other Color" +msgstr "" msgid "Custom Color" -msgstr "Custom Color" +msgstr "" msgid "Dynamic flow calibration" msgstr "Dinamikus anyagáramlás kalibráció" @@ -2848,15 +3215,9 @@ msgstr "Asztalhőmérséklet" msgid "Max volumetric speed" msgstr "Max. volumetrikus sebesség" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "Asztalhőmérséklet" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Start" @@ -2898,14 +3259,79 @@ msgstr "Dinamikus anyagáramlás kalibráció" msgid "Step" msgstr "Lépés" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS férőhelyek" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Fúvóka" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Megjegyzés: Csak az ugyanazzal az anyagtípussal feltöltött AMS helyek " -"választhatók ki." msgid "Enable AMS" msgstr "AMS engedélyezése" @@ -2919,22 +3345,15 @@ msgstr "AMS kikapcsolása" msgid "Print with the filament mounted on the back of chassis" msgstr "Nyomtatás külső tartón lévő filamenttel" -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Add meg, hogy melyik AMS-férőhely legyen legyen hozzárendelve a nyomtatásnál " "használt filamenthez." @@ -2954,12 +3373,21 @@ msgstr "Ne engedélyezd az AMS-t" msgid "Print using materials mounted on the back of the case" msgstr "Nyomtatás külső tartón lévő filamenttel." -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Nyomtatás az AMS-ben lévő filamentekkel" msgid "Print with filaments mounted on the back of the chassis" msgstr "Nyomtatás külső tartón lévő filamenttel" +msgid "Auto Refill" +msgstr "" + +msgid "Left" +msgstr "Bal" + +msgid "Right" +msgstr "Jobb" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -2967,27 +3395,29 @@ msgstr "" "Amikor az aktuális filament elfogy, a nyomtató a következő sorrendben " "folytatja a nyomtatást." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Group" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "A nyomtató jelenleg nem támogatja az automatikus újratöltést." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3009,7 +3439,7 @@ msgstr "" "filament tekercs behelyezésekor. Ez körülbelül 20 másodpercet vesz igénybe." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Megjegyzés: ha nyomtatás során új filament kerül behelyezésre, az AMS nem " @@ -3027,8 +3457,8 @@ msgstr "Frissítés bekapcsoláskor" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "Az AMS indításkor automatikusan kiolvassa a behelyezett filament adatait. Ez " "körülbelül 1 percet vesz igénybe. A leolvasási folyamat során a " @@ -3047,33 +3477,27 @@ msgid "Update remaining capacity" msgstr "Fennmaradó kapacitás frissítése" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"Az AMS képes megbecsülni, hogy mennyi filament maradt egy Bambu filament " -"tekercsen, a filament információinak frissítése során. Nyomtatás közben a " -"maradék mennyiség automatikusan frissül." msgid "AMS filament backup" -msgstr "AMS filament backup" +msgstr "" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "Az AMS automatikusan egy másik, azonos tulajdonságú filamentre vált, ha az " "aktuális filament kifogy." msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." msgid "File" msgstr "Fájl" @@ -3117,10 +3541,14 @@ msgid "" msgstr "" "Hiba történt. Lehet, hogy a rendszer memóriája nem elég, vagy a program hibás" -msgid "Please save project and restart the program. " -msgstr "Kérjük, mentsd el a projektet és indítsd újra a programot. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Kérjük, mentsd el a projektet és indítsd újra a programot." + +msgid "Processing G-code from Previous file..." msgstr "G-kód feldolgozása egy előző fájlból..." msgid "Slicing complete" @@ -3151,9 +3579,9 @@ msgid "Running post-processing scripts" msgstr "Utófeldolgozási szkriptek futtatása" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Ismeretlen hiba történt a G-kód exportálása közben." #, boost-format @@ -3204,12 +3632,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "G-kód fájl exportálva ide: %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Ismeretlen hiba a G-kód exportálásakor." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3225,225 +3653,6 @@ msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" "Feltöltés ütemezése ide: „%1%“. Lásd: Ablak -> Nyomtató feltöltési várólista" -msgid "Device" -msgstr "Nyomtató" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "Nézet" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Hozzáadás" - -msgid "Idle" -msgstr "Tétlen" - -msgid "Printing" -msgstr "Nyomtatás" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Előkészítés" - -msgid "Slicing" -msgstr "Szeletelés" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Küldés" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Folytatás" - -msgid "Stop" -msgstr "Állj" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Betöltés…" - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Nyomtatási feladat előkészítése" - -msgid "Abnormal print file data. Please slice again" -msgstr "Rendellenes nyomtatási fájladatok. Kérjük, szeleteld újra" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Asztalszintezés" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Küldés" - -msgid "Name is invalid;" -msgstr "A név érvénytelen;" - -msgid "illegal characters:" -msgstr "tiltott karakterek:" - -msgid "illegal suffix:" -msgstr "tiltott utótag:" - -msgid "The name is not allowed to be empty." -msgstr "A név mező nem lehet üres." - -msgid "The name is not allowed to start with space character." -msgstr "A név nem kezdődhet szóközzel." - -msgid "The name is not allowed to end with space character." -msgstr "A név nem végződhet szóközzel." - -msgid "The name length exceeds the limit." -msgstr "The name length exceeds the limit." - msgid "Origin" msgstr "Origó" @@ -3512,19 +3721,18 @@ msgstr "Válassz egy STL fájlt az asztal textúrájának importálásához:" msgid "Bed Shape" msgstr "Asztal alakja" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Az ajánlott minimum hőmérséklet kevesebb, mint 190 fok, vagy az ajánlott " -"maximális hőmérséklet nagyobb, mint 300 fok.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" msgid "Please check.\n" msgstr "Kérjük, ellenőrizd.\n" @@ -3541,38 +3749,35 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Az ajánlott fúvóka hőmérséklet ehhez a filament típushoz [%d, %d] Celsius-fok" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Túl alacsony max. volumetrikus sebesség.\n" "Az értéke 0,5-re állt vissza" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"Current chamber temperature is higher than the material's safe temperature; " -"this may result in material softening and nozzle clogs.The maximum safe " -"temperature for the material is %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Túl alacsony rétegmagasság.\n" "Visszaállítva 0,2-re" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Túl kicsi vasalási térköz.\n" "Visszaállítva 0,1-re" @@ -3616,14 +3821,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3662,31 +3867,41 @@ msgstr "" "IGEN - Törlő torony megtartása\n" "NEM - Független támasz rétegmagasság megtartása" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"While printing by object, the extruder may collide with a skirt.\n" -"Thus, reset the skirt layer to 1 to avoid collisions." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." msgid " But machines with I3 structure will not generate timelapse videos." msgstr "" " Az I3-szerkezetű gépek azonban nem fognak timelapse videókat készíteni." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" @@ -3695,14 +3910,17 @@ msgstr "" "spirál mód használatát\n" "Nem - Ne használja a spirál módot ez alkalommal" +msgid "Printing" +msgstr "Nyomtatás" + msgid "Auto bed leveling" msgstr "Automatikus asztalszintezés" msgid "Heatbed preheating" msgstr "Asztal előfűtése" -msgid "Sweeping XY mech mode" -msgstr "XY mechanika ellenőrzése" +msgid "Vibration compensation" +msgstr "Rezgés-kompenzáció" msgid "Changing filament" msgstr "Filament váltása" @@ -3710,14 +3928,14 @@ msgstr "Filament váltása" msgid "M400 pause" msgstr "M400 szünet" -msgid "Paused due to filament runout" -msgstr "Megállítva, mert kifogyott a filament" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Hotend fűtése" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Extrudálás kalibrálása" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Asztalfelület szkennelése" @@ -3740,78 +3958,138 @@ msgstr "Fúvóka hegyének tisztítása" msgid "Checking extruder temperature" msgstr "Extruder hőmérsékletének ellenőrzése" -msgid "Printing was paused by the user" -msgstr "Nyomtatás szüneteltetve a felhasználó által" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Szünet az előlap leesése miatt" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Micro Lidar kalibrálása" -msgid "Calibrating extrusion flow" -msgstr "Anyagáramlás kalibrálása" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Szüneteltetve a fúvóka hőmérsékletének rendellenessége miatt" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Szüneteltetve a tárgyasztal hőmérsékletének rendellenessége miatt" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Filament kitöltése" -msgid "Skip step pause" -msgstr "Lépésvesztés miatti szünet" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Filament betöltése" -msgid "Motor noise calibration" -msgstr "Motorzaj-kalibrálás" +msgid "Motor noise cancellation" +msgstr "Motorzajszűrés" -msgid "Paused due to AMS lost" -msgstr "Szüneteltetve az AMS elvesztése miatt" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Szüneteltetve a heat break ventilátor alacsony fordulatszáma miatt" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Szüneteltetve a kamra hőmérséklet-szabályzó hibája miatt" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Kamra hűtése" -msgid "Paused by the Gcode inserted by user" -msgstr "Szüneteltetve a felhasználó által beillesztett G-kód miatt" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Motorzaj bemutató" -msgid "Nozzle filament covered detected pause" -msgstr "Szüneteltetve a fúvókára került filament miatt" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Szüneteltetve a filamentvágó meghibásodása miatt" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Szüneteltetve a kezdőrétegen található hiba miatt" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Szüneteltetve a fúvóka eltömődése miatt" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Ismeretlen" -msgid "Fatal" -msgstr "Súlyos" - -msgid "Serious" -msgstr "Komoly" - -msgid "Common" -msgstr "Gyakori" - msgid "Update successful." msgstr "Sikeres frissítés." @@ -3824,34 +4102,54 @@ msgstr "Sikertelen ellenőrzés." msgid "Update failed." msgstr "A frissítés sikertelen." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/" -"TPU) is not allowed to be loaded." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." msgstr "" -"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order " -"to avoid extruder clogging, it is not allowed to set the chamber temperature " -"above 45℃." msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" + +msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " "control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." +msgstr "" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Nem sikerült elindítani a nyomtatási feladatot" msgid "" @@ -3864,31 +4162,77 @@ msgstr "Az anyagáramlás kalibrációs paramétere érvénytelen" msgid "Selected diameter and machine diameter do not match" msgstr "A kiválasztott átmérő és a nyomtatóban megadott átmérő nem egyezik" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Nem sikerült létrehozni a kalibrációs G-kódot" msgid "Calibration error" msgstr "Kalibrációs hiba" -msgid "TPU is not supported by AMS." -msgstr "Az AMS nem támogatja a TPU-t." - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "A Bambu PET-CF/PA6-CF filament nem használható az AMS-sel." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume Printing" msgstr "" -"A nedves PVA rugalmassá válik és elakadhat az AMS belsejében; kérjük, " -"használat előtt alaposan szárítsd ki." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "Filament betöltés" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "" + +msgid "Retry" +msgstr "Újra" + +msgid "Resume" +msgstr "Folytatás" + +msgid "Unknown error." msgstr "" -"A CF/GF filament rideg és törékeny, ezért könnyen eltörhet vagy elakadhat az " -"AMS-ben; kérjük, légy körültekintő a használatakor." msgid "default" msgstr "alapértelmezett" @@ -3900,7 +4244,7 @@ msgstr "" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3941,7 +4285,7 @@ msgid "Specific for %1%" msgstr "" msgid "Presets" -msgstr "Presets" +msgstr "" msgid "Print settings" msgstr "Nyomtatási beállítások" @@ -3959,7 +4303,7 @@ msgid "parameter name" msgstr "paraméter neve" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s nem lehet százalék" #, c-format, boost-format @@ -3971,7 +4315,7 @@ msgstr "Paraméter validáció" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "" msgid "Value is out of range." msgstr "Az érték tartományon kívül esik." @@ -4000,10 +4344,27 @@ msgstr "A bemeneti érték kívül esik a tartományon" msgid "Some extension in the input is invalid" msgstr "" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Érvénytelen formátum. Elvárt vektor formátum: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Rétegmagasság" @@ -4013,9 +4374,6 @@ msgstr "Vonalszélesség" msgid "Fan Speed" msgstr "Ventilátor fordulatszám" -msgid "Temperature" -msgstr "Hőmérséklet" - msgid "Flow" msgstr "Anyagáramlás" @@ -4049,7 +4407,7 @@ msgstr "Ventilátor-fordulatszám:" msgid "Temperature: " msgstr "Hőmérséklet:" -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "G-kódok betöltése" msgid "Generating geometry vertex data" @@ -4059,7 +4417,7 @@ msgid "Generating geometry index data" msgstr "Geometriai index adatok generálása" msgid "Statistics of All Plates" -msgstr "Statistics of All Plates" +msgstr "" msgid "Display" msgstr "Megjelenítés" @@ -4080,7 +4438,73 @@ msgid "Total time" msgstr "Teljes idő" msgid "Total cost" -msgstr "Total cost" +msgstr "" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Tippek:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Tippek" msgid "up to" msgstr "legfeljebb" @@ -4091,17 +4515,11 @@ msgstr "felett" msgid "from" msgstr "ettől" -msgid "Color Scheme" -msgstr "Színséma" - msgid "Time" msgstr "Idő" -msgid "Percent" -msgstr "Százalék" - -msgid "Used filament" -msgstr "Használt filament" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Rétegmagasság (mm)" @@ -4146,14 +4564,14 @@ msgid "travel" msgstr "mozgás" msgid "Extruder" -msgstr "Extruder" - -msgid "Filament change times" -msgstr "Filamentcserék száma" +msgstr "" msgid "Cost" msgstr "Költség" +msgid "Filament change times" +msgstr "Filamentcserék száma" + msgid "Color change" msgstr "Színváltás" @@ -4163,10 +4581,7 @@ msgstr "Nyomtatás" msgid "Printer" msgstr "Nyomtató" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -4176,10 +4591,10 @@ msgid "Normal mode" msgstr "Normál mód" msgid "Total Filament" -msgstr "Total Filament" +msgstr "" msgid "Model Filament" -msgstr "Model Filament" +msgstr "" msgid "Prepare time" msgstr "Előkészítési idő" @@ -4193,6 +4608,19 @@ msgstr "Váltás csendes módra" msgid "Switch to normal mode" msgstr "Váltás normál módra" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Változó rétegmagasság" @@ -4211,27 +4639,15 @@ msgstr "Sugár" msgid "Keep min" msgstr "Maradjon min." -msgid "Left mouse button:" -msgstr "Bal egérgomb:" - msgid "Add detail" msgstr "Részlet hozzáadása" -msgid "Right mouse button:" -msgstr "Jobb egérgomb:" - msgid "Remove detail" msgstr "Részlet eltávolítása" -msgid "Shift + Left mouse button:" -msgstr "Shift + bal egérgomb" - msgid "Reset to base" msgstr "Alaphelyzetbe állítás" -msgid "Shift + Right mouse button:" -msgstr "Shift + jobb egérgomb:" - msgid "Smoothing" msgstr "Simítás" @@ -4244,6 +4660,55 @@ msgstr "Szerkesztési terület növelése/csökkentése" msgid "Sequence" msgstr "Sorrend" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Objektum tükrözése" @@ -4251,7 +4716,7 @@ msgid "Tool Move" msgstr "Fej mozgatása" msgid "Tool Rotate" -msgstr "Tool Rotate" +msgstr "" msgid "Move Object" msgstr "Objektum mozgatása" @@ -4275,7 +4740,7 @@ msgid "Spacing" msgstr "Térköz" msgid "0 means auto spacing." -msgstr "0 means auto spacing." +msgstr "" msgid "Auto rotate for arrangement" msgstr "Automatikus forgatás az elrendezéshez" @@ -4289,11 +4754,25 @@ msgstr "Extrudáláskalibráció környékének elkerülése" msgid "Align to Y axis" msgstr "Igazítás az Y-tengelyhez" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Hozzáadás" + msgid "Add plate" msgstr "Tálca hozzáadása" -msgid "Auto orient" -msgstr "Automatikus orientáció" +msgid "Auto orient all/selected objects" +msgstr "Összes/kiválasztott objektum automatikus orientációja" + +msgid "Auto orient all objects on current plate" +msgstr "Aktuális tálca összes objektumának automatikus orientációja" msgid "Arrange all objects" msgstr "Összes objektum elrendezése" @@ -4313,11 +4792,29 @@ msgstr "Összeszerelési nézet" msgid "Select Plate" msgstr "Tálca kiválasztása" +msgid "Slicing" +msgstr "Szeletelés" + +msgid "Slice all" +msgstr "Összes szeletelése" + +msgid "Failed" +msgstr "Sikertelen" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "Vissza az összeszereléshez" -msgid "return" -msgstr "vissza" +msgid "Return" +msgstr "Vissza" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Festés eszköztár" @@ -4331,6 +4828,9 @@ msgstr "Keresztmetszet nézet" msgid "Assemble Control" msgstr "Összeállítás" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Teljes térfogat:" @@ -4345,31 +4845,69 @@ msgstr "Méret:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Egy objektum a tálca határvonalán túlra került." msgid "A G-code path goes beyond the max print height." msgstr "A G-kód útvonala túlmegy a maximális nyomtatási magasságon." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "A G-kód útvonala túlmegy a tálca peremén." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Csak az éppen szerkesztett objektum látható." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Egy objektum a tálca határvonalán túlra került, vagy túllépi a magassági " -"határt.\n" -"Kérjük, orvosold a problémát azzal, hogy teljesen a lemezre helyezed és " -"győződj meg, hogy a magassága belefér a nyomtatótérbe." msgid "Calibration step selection" msgstr "Kalibrálási lépés kiválasztása" @@ -4380,11 +4918,8 @@ msgstr "Micro Lidar kalibrálás" msgid "Bed leveling" msgstr "Asztalszintezés" -msgid "Vibration compensation" -msgstr "Rezgés-kompenzáció" - -msgid "Motor noise cancellation" -msgstr "Motorzajszűrés" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Kalibrációs program" @@ -4437,24 +4972,21 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "Az „Élő videó” útmutató oldal megjelenítése." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Nyomtató csatlakoztatása (LAN)" msgid "Please input the printer access code:" msgstr "Kérjük, add meg a nyomtató hozzáférési kódját:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Ezt a \"Beállítások > Hálózat > Csatlakozási kód\" menüpontban\n" -"találod a nyomtatón, ahogy az ábrán látható:" msgid "Invalid input." msgstr "Érvénytelen adat" @@ -4474,9 +5006,15 @@ msgstr "Alkalmazás bezárása egyes beállítások módosítása közben." msgid "Logging" msgstr "Naplózás" +msgid "Prepare" +msgstr "Előkészítés" + msgid "Preview" msgstr "Előnézet" +msgid "Device" +msgstr "Nyomtató" + msgid "Multi-device" msgstr "Multi-device" @@ -4490,7 +5028,7 @@ msgid "No" msgstr "Nem" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "will be closed before creating a new model. Do you want to continue?" +msgstr "" msgid "Slice plate" msgstr "Tálca szeletelése" @@ -4498,12 +5036,12 @@ msgstr "Tálca szeletelése" msgid "Print plate" msgstr "Nyomtatótálca" -msgid "Slice all" -msgstr "Összes szeletelése" - msgid "Export G-code file" msgstr "G-kód fájl exportálása" +msgid "Send" +msgstr "Küldés" + msgid "Export plate sliced file" msgstr "Szeletelt tálca exportálása" @@ -4516,6 +5054,9 @@ msgstr "Összes nyomtatása" msgid "Send all" msgstr "Összes elküldése" +msgid "Send to Multi-device" +msgstr "" + msgid "Keyboard Shortcuts" msgstr "Gyorsbillentyűk" @@ -4550,10 +5091,6 @@ msgstr "Modellek letöltése" msgid "Default View" msgstr "Alapértelmezett nézet" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Felül" - msgid "Top View" msgstr "Felülnézet" @@ -4576,15 +5113,9 @@ msgstr "Hátul" msgid "Rear View" msgstr "Hátulnézet" -msgid "Left" -msgstr "Bal" - msgid "Left View" msgstr "Bal nézet" -msgid "Right" -msgstr "Jobb" - msgid "Right View" msgstr "Jobb nézet" @@ -4600,8 +5131,8 @@ msgstr "Új projekt indítása" msgid "Open a project file" msgstr "Projektfájl megnyitása" -msgid "Recent projects" -msgstr "Legutóbbi projektek" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Projekt mentése" @@ -4612,9 +5143,6 @@ msgstr "Jelenlegi projekt mentése egy fájlba" msgid "Save Project as" msgstr "Projekt mentése másként" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Jelenlegi projekt mentése másként" @@ -4631,13 +5159,13 @@ msgid "Load models contained within a zip archive" msgstr "" msgid "Import Configs" -msgstr "Import Configs" +msgstr "" msgid "Load configs" -msgstr "Load configs" +msgstr "" msgid "Import" -msgstr "Import" +msgstr "" msgid "Export all objects as one STL" msgstr "Az összes objektum exportálása egy STL-ként" @@ -4646,10 +5174,10 @@ msgid "Export all objects as STLs" msgstr "Az összes objektum exportálása STL-ként" msgid "Export Generic 3MF" -msgstr "Export Generic 3MF" +msgstr "" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Export 3mf file without using some 3mf-extensions" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "" msgid "Export current sliced file" msgstr "Aktuális szeletelt fájl exportálása" @@ -4663,6 +5191,9 @@ msgstr "G-kód exportálása" msgid "Export current plate as G-code" msgstr "Jelenlegi tálca exportálása G-kódként" +msgid "Export toolpaths as OBJ" +msgstr "Szerszámút exportálása OBJ-ként" + msgid "Export Preset Bundle" msgstr "" @@ -4714,6 +5245,12 @@ msgstr "Kijelölt klónozása" msgid "Clone copies of selections" msgstr "A kijelölések klónmásolatai" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "Összes kijelölése" @@ -4732,16 +5269,24 @@ msgstr "Perspektivikus nézet használata" msgid "Use Orthogonal View" msgstr "Ortogonális nézet használata" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4753,18 +5298,27 @@ msgstr "" msgid "Show &Labels" msgstr "Címkék megjelenítése" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Objektumcímkék megjelenítése a 3D-térben" msgid "Show &Overhang" -msgstr "Show &Overhang" +msgstr "" -msgid "Show object overhang highlight in 3D scene" -msgstr "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." +msgstr "" + +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." +msgstr "" msgid "Preferences" msgstr "Beállítások" +msgid "View" +msgstr "Nézet" + msgid "Help" msgstr "Segítség" @@ -4783,6 +5337,18 @@ msgstr "2. menet" msgid "Flow rate test - Pass 2" msgstr "Anyagáramlás teszt - 2. menet" +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" + msgid "Flow rate" msgstr "Anyagáramlás" @@ -4792,27 +5358,33 @@ msgstr "Nyomáselőtolás (PA)" msgid "Retraction test" msgstr "Visszahúzás teszt" -msgid "Orca Tolerance Test" -msgstr "Orca Tolerance Test" - msgid "Max flowrate" msgstr "Max. anyagáramlás" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Több..." - msgid "Tutorial" msgstr "Útmutató" msgid "Calibration help" msgstr "Kalibrálási segítség" -msgid "More calibrations" -msgstr "További kalibrációk" - msgid "&Open G-code" msgstr "&G-kód megnyitása" @@ -4828,9 +5400,6 @@ msgstr "Plater újratöltése a lemezről" msgid "Export &Toolpaths as OBJ" msgstr "Szerszámút exportálása OBJ-ként" -msgid "Export toolpaths as OBJ" -msgstr "Szerszámút exportálása OBJ-ként" - msgid "Open &Slicer" msgstr "Studio megnyitása" @@ -4854,21 +5423,24 @@ msgid "&Help" msgstr "&Segítség" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "A file exists with the same name: %s. Do you want to override it?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "A config exists with the same name: %s. Do you want to override it?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "" msgid "Overwrite file" -msgstr "Overwrite file" +msgstr "" + +msgid "Overwrite config" +msgstr "" msgid "Yes to All" -msgstr "Yes to All" +msgstr "" msgid "No to All" -msgstr "No to All" +msgstr "" msgid "Choose a directory" msgstr "Válassz egy mappát" @@ -4880,7 +5452,7 @@ msgstr[0] "" msgstr[1] "" msgid "Export result" -msgstr "Export Result" +msgstr "" msgid "Select profile to load:" msgstr "Válaszd ki a betölteni kívánt profilt:" @@ -4899,7 +5471,7 @@ msgid "" msgstr "" msgid "Import result" -msgstr "Import result" +msgstr "" msgid "File is missing" msgstr "Hiányzik a fájl" @@ -4911,7 +5483,7 @@ msgid "Filament Settings" msgstr "Filament beállítások" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4950,7 +5522,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "A nyomtató kamerája hibásan működik." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Probléma merült fel. Kérjük, frissítsd a nyomtató firmware-ét, és próbáld " "meg újra." @@ -4958,7 +5530,6 @@ msgstr "" msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." msgid "Please enter the IP of printer to connect." msgstr "A csatlakozáshoz add meg a nyomtató IP-címét." @@ -4971,7 +5542,7 @@ msgstr "" "Csatlakozás sikertelen. Kérjük, ellenőrizd a hálózatot, és próbáld újra" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Kérjük, ellenőrizd a hálózatot, és próbáld újra. Ha a probléma továbbra is " @@ -4980,8 +5551,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "A nyomtató ki van jelentkezve, és nem tud csatlakozni." -msgid "Stopped." -msgstr "Megállítva." +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Sikertelen LAN csatlakozás (Nem sikerült elindítani az élő videót)" @@ -5018,11 +5589,14 @@ msgstr "Információ" msgid "Playing..." msgstr "Lejátszás..." +msgid "Loading..." +msgstr "Betöltés…" + msgid "Year" -msgstr "Year" +msgstr "" msgid "Month" -msgstr "Month" +msgstr "" msgid "All Files" msgstr "Minden fájl" @@ -5036,6 +5610,9 @@ msgstr "Fájlok csoportosítása hónap szerint, elöl a legújabb." msgid "Show all files, recent first." msgstr "Minden fájl megjelenítése, elöl a legújabb." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Váltás timelapse fájlokra." @@ -5045,8 +5622,8 @@ msgstr "Video" msgid "Switch to video files." msgstr "Váltás a videófájlokra." -msgid "Switch to 3mf model files." -msgstr "Switch to 3mf model files." +msgid "Switch to 3MF model files." +msgstr "" msgid "Delete selected files from printer." msgstr "Kijelölt fájlok törlése a nyomtatóról." @@ -5067,46 +5644,30 @@ msgid "Refresh" msgstr "Frissítés" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "" msgid "No printers." -msgstr "No printers." - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Connection failed [%d]!" +msgstr "" msgid "Loading file list..." -msgstr "Loading file list..." +msgstr "" msgid "No files" msgstr "Nincs fájl" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "Initialization failed (Device connection not ready)!" +msgstr "" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Sikertelen inicializálás (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5116,17 +5677,17 @@ msgstr[0] "" msgstr[1] "" msgid "Delete files" -msgstr "Delete files" +msgstr "" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Do you want to delete the file '%s' from printer?" +msgstr "" msgid "Delete file" -msgstr "Delete file" +msgstr "" -msgid "Fetching model infomations ..." -msgstr "Fetching model information..." +msgid "Fetching model information..." +msgstr "" msgid "Failed to fetch model information from printer." msgstr "Nem sikerült letölteni a modellinfomációt a nyomtatóról." @@ -5135,8 +5696,8 @@ msgid "Failed to parse model information." msgstr "Nem sikerült feldolgozni a modellinformációkat" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" #, c-format, boost-format @@ -5148,8 +5709,6 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" msgid "Download waiting..." msgstr "Várakozás letöltésre..." @@ -5167,12 +5726,16 @@ msgstr "A letöltés kész" msgid "Downloading %d%%..." msgstr "Letöltés %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." msgstr "A fájl nem létezik." @@ -5183,13 +5746,47 @@ msgstr "Fájl checksum hiba. Kérjük, próbáld újra." msgid "Not supported on the current printer version." msgstr "A nyomtató jelenlegi szoftvere nem támogatja." -msgid "Storage unavailable, insert SD card." -msgstr "A tárhely nem elérhető; kérjük helyezz be egy MicroSD-kártyát." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Hibakód: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Sebesség:" @@ -5229,14 +5826,87 @@ msgstr "" msgid "Invert Roll axis" msgstr "" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Keresés" + +msgid "My Device" +msgstr "Saját eszköz" + +msgid "Other Device" +msgstr "Egyéb eszköz" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Add meg a hozzáférési kódot" + +msgid "Can't find my devices?" +msgstr "Nem találod az eszközöket?" + +msgid "Log out successful." +msgstr "Sikeres kijelentkezés." + +msgid "Offline" +msgstr "" + +msgid "Busy" +msgstr "Elfoglalt" + +msgid "Modifying the device name" +msgstr "Eszköz nevének módosítása" + +msgid "Name is invalid;" +msgstr "A név érvénytelen;" + +msgid "illegal characters:" +msgstr "tiltott karakterek:" + +msgid "illegal suffix:" +msgstr "tiltott utótag:" + +msgid "The name is not allowed to be empty." +msgstr "A név mező nem lehet üres." + +msgid "The name is not allowed to start with space character." +msgstr "A név nem kezdődhet szóközzel." + +msgid "The name is not allowed to end with space character." +msgstr "A név nem végződhet szóközzel." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Nyomtatás folyamata" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Állj" msgid "Layer: N/A" -msgstr "Layer: N/A" +msgstr "" msgid "Clear" msgstr "Törlés" @@ -5245,8 +5915,6 @@ msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"You have completed printing the mall model, \n" -"but synchronizing rating information has failed." msgid "How do you like this printing file?" msgstr "Hogy tetszik ez a nyomtatási fájl?" @@ -5262,8 +5930,8 @@ msgstr "Értékelés" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "MicroSD kártya" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Kamera beállítása" @@ -5275,40 +5943,46 @@ msgid "Control" msgstr "Vezérlés" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "" msgid "Print Options" msgstr "Nyomtatási lehetőségek" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Világítás" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Cham" - msgid "Bed" msgstr "Asztal" msgid "Debug Info" msgstr "Hibakeresési infó" -msgid "No SD Card" -msgstr "Nincs MicroSD kártya" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "Hibás MicroSD kártya" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Nyomtatás megszakítása" -msgid "Are you sure you want to cancel this print?" -msgstr "Biztosan megszakítod ezt a nyomtatást?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "A nyomtató egy másik nyomtatási feladattal van elfoglalva." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Letöltés..." @@ -5322,24 +5996,23 @@ msgstr "In Cloud Slicing Queue, there are %s tasks ahead of you." #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "" +#, fuzzy msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" "Kérjük, melegítsd a fúvókát 170 fok fölé a filament betöltése vagy kihúzása " "előtt." -msgid "Still unload" -msgstr "Még kitöltődik" - -msgid "Still load" -msgstr "Még töltődik" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Válassz egy AMS-helyet a kalibrálás előtt" @@ -5366,8 +6039,19 @@ msgstr "Sport" msgid "Ludicrous" msgstr "Őrült" -msgid "Can't start this without SD card." -msgstr "MicroSD kártya nélkül nem indítható." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Értékeld a nyomtatási profilt" @@ -5390,14 +6074,11 @@ msgstr "Elküldés" msgid "Please click on the star first." msgstr "Kérjük, először kattints a csillagokra." -msgid "InFo" -msgstr "Infó" - msgid "Get oss config failed." msgstr "OSS-konfiguráció letöltése sikertelen." -msgid "Upload Pictrues" -msgstr "Upload Pictures" +msgid "Upload Pictures" +msgstr "" msgid "Number of images successfully uploaded" msgstr "Sikeresen feltöltött képek száma" @@ -5406,13 +6087,13 @@ msgid " upload failed" msgstr " feltöltés sikertelen" msgid " upload config prase failed\n" -msgstr " upload config prase failed\n" +msgstr "" msgid " No corresponding storage bucket\n" msgstr " Nincs megfelelő tárolóhely\n" -msgid " can not be opened\n" -msgstr " cannot be opened\n" +msgid " cannot be opened\n" +msgstr "" msgid "" "The following issues occurred during the process of uploading images. Do you " @@ -5436,13 +6117,10 @@ msgid "obtaining instance_id failed\n" msgstr "Az instance_id beszerzése sikertelen\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " +msgstr "" msgid "error message: " msgstr "hibaüzenet: " @@ -5450,15 +6128,12 @@ msgstr "hibaüzenet: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" "Would you like to redirect to the webpage to give a rating?" +msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Néhány képet nem sikerült feltölteni. Szeretnéd, ha átirányítanánk a " "weboldalra az értékelés beküldéséhez?" @@ -5468,7 +6143,7 @@ msgstr "Legfeljebb 16 képet választhatsz ki." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." @@ -5476,12 +6151,22 @@ msgstr "" msgid "Status" msgstr "Állapot" +msgctxt "Firmware" msgid "Update" -msgstr "Frissítés" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Ne mutasd újra" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s hiba" @@ -5509,11 +6194,11 @@ msgstr "%s információ" msgid "Skip" msgstr "Kihagyás" -msgid "Newer 3mf version" -msgstr "Újabb 3mf verzió" +msgid "Newer 3MF version" +msgstr "Újabb 3MF verzió" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5523,10 +6208,10 @@ msgstr "" msgid "Download Beta Version" msgstr "Béta verzió letöltése" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " @@ -5535,8 +6220,31 @@ msgstr "Jelenlegi verzió: " msgid "Latest Version: " msgstr "Legújabb verzió: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" -msgstr "Not for now" +msgstr "" + +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" msgid "3D Mouse disconnected." msgstr "3D Mouse csatlakoztatva." @@ -5584,7 +6292,7 @@ msgid "Open Folder." msgstr "Mappa megnyitása." msgid "Safely remove hardware." -msgstr "Safely remove hardware." +msgstr "" #, c-format, boost-format msgid "%1$d Object has custom supports." @@ -5600,7 +6308,13 @@ msgstr[1] "%1$d objektum színfestést tartalmaz." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "" +msgstr[1] "" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgstr[1] "" @@ -5625,7 +6339,7 @@ msgstr "Hiba:" msgid "Warning:" msgstr "Figyelem:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Sikeresen exportálva" msgid "Model file downloaded." @@ -5643,11 +6357,11 @@ msgstr " Kattints ide a telepítéshez." msgid "WARNING:" msgstr "FIGYELEM:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "A modellnek támaszra van szüksége! Kérjük, engedélyezd a támasz generálását." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "G-kód útvonal átfedés" msgid "Support painting" @@ -5657,7 +6371,7 @@ msgid "Color painting" msgstr "Színfestés" msgid "Cut connectors" -msgstr "Cut connectors" +msgstr "" msgid "Layers" msgstr "Rétegek" @@ -5697,12 +6411,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Alsó" -msgid "Enable AI monitoring of printing" -msgstr "Nyomtatás MI-felügyeletének engedélyezése" - -msgid "Sensitivity of pausing is" -msgstr "Szüneteltetés érzékenysége" - msgid "Enable detection of build plate position" msgstr "Nyomtatótálca helyzetének érzékelése" @@ -5713,36 +6421,107 @@ msgstr "" "A nyomtató megkeresi a nyomtatótálca lokalizációs címkéjét, és szünetelteti " "a nyomtatást, ha az nem egy előre meghatározott tartományban van." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Nyomtatás MI-felügyeletének engedélyezése" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Kezdőréteg ellenőrzése" msgid "Auto-recovery from step loss" msgstr "Automatikus helyreállítás lépésvesztésből" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Hangjelzés engedélyezése" msgid "Filament Tangle Detect" -msgstr "Filament Tangle Detection" - -msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Fúvóka Típus" -msgid "Stainless Steel" -msgstr "Rozsdamentes acél" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Edzett acél" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Rozsdamentes acél" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Globális" @@ -5777,6 +6556,9 @@ msgstr "" msgid "Lock current plate" msgstr "" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5786,6 +6568,31 @@ msgstr "" msgid "Customize current plate" msgstr "" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " %1% tálca:" @@ -5814,14 +6621,67 @@ msgstr "Becsült idő" msgid "Filament changes" msgstr "Filamentcserék" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Kattints a beállítás szerkesztéséhez" msgid "Connection" msgstr "Kapcsolat" -msgid "Bed type" -msgstr "Asztaltípus" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Tisztítási mennyiségek" @@ -5844,42 +6704,27 @@ msgstr "Tálca, objektum és tárgy keresése." msgid "Pellets" msgstr "" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Nem található AMS-filament. Kérjük, válassz egy nyomtatót az „Nyomtató” " -"oldalon az AMS információk betöltéséhez." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Nincs kompatibilis filament és nem történt szinkronizálás." msgid "Sync filaments with AMS" msgstr "Filamentek szinkronizálása az AMS-sel" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Ha szinkronizálod a filamenteket az AMS-sel, akkor az összes jelenleg " -"kiválasztott filamentbeállítás és szín felülírásra kerül. Folytatod?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Already did a synchronization; do you want to sync only changes or resync " -"all?" - -msgid "Sync" -msgstr "Sync" - -msgid "Resync" -msgstr "Resync" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Nincs kompatibilis filament és nem történt szinkronizálás." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -5888,15 +6733,15 @@ msgstr "Szeretnéd elmenteni \"%1%\" változásait?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Sikeresen leválasztva. A(z) %s(%s) eszköz most már biztonságosan " "eltávolítható." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "A(z) %s(%s) eszköz kiadása nem sikerült." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Korábbi, nem mentett projektet találtunk, vissza szeretnéd állítani?" @@ -5929,28 +6774,47 @@ msgstr "" "A hagyományos timelapse engedélyezése felületi hibákat okozhat. Javasoljuk, " "hogy válts a sima módra." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Az oldalsáv kibontása" msgid "Collapse sidebar" msgstr "&Az oldalsáv összecsukása" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Fájl betöltése: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -msgid "Load 3mf" -msgstr "3mf betöltése" +msgid "Load 3MF" +msgstr "3MF betöltése" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, a következő " +"A 3MF fájl %s verziója újabb, mint a(z) %s verziója %s, a következő " "ismeretlen kulcsokat találtuk:" msgid "You'd better upgrade your software.\n" @@ -5958,37 +6822,44 @@ msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a szoftver " +"A 3MF fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a szoftver " "frissítése." -msgid "Invalid values found in the 3mf:" -msgstr "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "" msgid "Please correct them in the param tabs" -msgstr "Please correct them in the Param tabs" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "The 3mf has following modified G-code in filament or printer presets:" +msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "" + +msgid "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Kérjük, győződj meg arról, hogy ezek a módosított G-kódok biztonságosak, " "hogy elkerüld a nyomtató esetleges károsodását!" -msgid "Modified G-codes" -msgstr "Modified G-code" - -msgid "The 3mf has following customized filament or printer presets:" +msgid "Modified G-code" msgstr "" -"A 3mf a következő egyedi filament- vagy nyomtatóbeállításokat tartalmazza:" + +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "" +"A 3MF a következő egyedi filament- vagy nyomtatóbeállításokat tartalmazza:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Kérjük, győződj meg arról, hogy a beállításokban található G-kódok " @@ -5997,7 +6868,7 @@ msgstr "" msgid "Customized Preset" msgstr "Egyedi beállítás" -msgid "Name of components inside step file is not UTF8 format!" +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "A STEP fájlon belüli komponens neve nem UTF-8 formátumban van!" msgid "The name may show garbage characters!" @@ -6005,7 +6876,7 @@ msgstr "" "A nem támogatott szövegkódolás miatt helytelen karakterek jelenhetnek meg!" msgid "Remember my choice." -msgstr "Remember my choice." +msgstr "" #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." @@ -6045,12 +6916,23 @@ msgstr "Betöltöd ezeket a fájlokat több részből álló egyetlen objektumk msgid "Object with multiple parts was detected" msgstr "Több részből álló objektumot észleltünk" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "A fájl nem tartalmaz geometriai adatokat." +#, fuzzy msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Úgy tűnik, hogy az objektum túl nagy. Szeretnéd átméretezni, hogy " "illeszkedjen a nyomtatótér méretéhez?" @@ -6082,16 +6964,13 @@ msgid "Confirm Save As" msgstr "Mentés másként megerősítése" msgid "Delete object which is a part of cut object" -msgstr "Delete object which is a part of cut object" +msgstr "" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"You are trying to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed." msgid "The selected object couldn't be split." msgstr "A kijelölt objektumot nem lehet feldarabolni." @@ -6114,6 +6993,34 @@ msgstr "Válassz egy új fájlt" msgid "File for the replace wasn't selected" msgstr "A cserefájl nem lett kiválasztva" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Kérjük, válassz egy fájlt" @@ -6159,12 +7066,23 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Csak előnézeti mód:\n" "A betöltött fájl csak G-kódot tartalmaz, nem lehet továbblépni az " "Előkészítés fülre" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Megtarthatod az új projekt módosított beállításait, vagy elvetheted őket" @@ -6190,17 +7108,17 @@ msgstr "Projekt mentése" msgid "Importing Model" msgstr "Modell importálása" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "3mf fájl előkészítése..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "projekt letöltése ..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "" #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6211,13 +7129,23 @@ msgid "" "import it." msgstr "" +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "SLA archívum importálása" msgid "The selected file" msgstr "A kiválasztott fájl" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "nem tartalmaz érvényes G-kódot." msgid "Error occurs while loading G-code file" @@ -6255,10 +7183,10 @@ msgstr "Egyszerre csak egy G-kód fájl nyitható meg." msgid "G-code loading" msgstr "G-code betöltése" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "A G-code fájlokat nem lehet a modellekkel együtt betölteni!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Előnézeti módban nem lehet modelleket hozzáadni!" msgid "All objects will be removed, continue?" @@ -6297,44 +7225,37 @@ msgid "" msgstr "" "A(z) %s fájl elküldésre került a nyomtatóra, és megtekinthető a nyomtatón." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6342,6 +7263,9 @@ msgstr "" msgid "Upload and Print" msgstr "Feltöltés és Nyomtatás" +msgid "Abnormal print file data. Please slice again" +msgstr "Rendellenes nyomtatási fájladatok. Kérjük, szeleteld újra" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6363,15 +7287,40 @@ msgstr "" msgid "Optimize Rotation" msgstr "" -msgid "Invalid number" -msgstr "Érvénytelen szám" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" -msgstr "Plate Settings" +msgstr "" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Number of currently selected parts: %1%\n" +msgstr "" #, boost-format msgid "Number of currently selected objects: %1%\n" @@ -6405,9 +7354,6 @@ msgstr "Térfogat: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Háromszögek: %1%\n" -msgid "Tips:" -msgstr "Tippek:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6415,13 +7361,36 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Plate% d: %s is not suggested for use printing filament %s(%s). If you still " -"want to do this print job, please set this filament's bed temperature to a " -"number that is not zero." msgid "Switching the language requires application restart.\n" msgstr "A nyelvváltáshoz az alkalmazás újraindítása szükséges.\n" @@ -6438,18 +7407,51 @@ msgstr "Alkalmazás nyelvének átváltása, miközben egyes beállítások mód msgid "Changing application language" msgstr "Alkalmazás nyelvének megváltoztatása" +msgid "Asia-Pacific" +msgstr "Ázsia-Csendes-óceáni térség" + +msgid "China" +msgstr "Kína" + +msgid "Europe" +msgstr "Európa" + +msgid "North America" +msgstr "Észak-Amerika" + +msgid "Others" +msgstr "Egyéb" + msgid "Changing the region will log out your account.\n" msgstr "A régió megváltoztatásával a fiókod kijelentkezik.\n" msgid "Region selection" msgstr "Régió kiválasztása" -msgid "Second" -msgstr "Másodperc" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "" + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "Tallózás" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "Válassz letöltési mappát" @@ -6468,40 +7470,8 @@ msgstr "" msgid "Current Instance Path: " msgstr "" -msgid "General Settings" -msgstr "Általános beállítások" - -msgid "Asia-Pacific" -msgstr "Ázsia-Csendes-óceáni térség" - -msgid "China" -msgstr "Kína" - -msgid "Europe" -msgstr "Európa" - -msgid "North America" -msgstr "Észak-Amerika" - -msgid "Others" -msgstr "Egyéb" - -msgid "Login Region" -msgstr "Régió" - -msgid "Stealth Mode" -msgstr "" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" - -msgid "Enable network plugin" -msgstr "" - -msgid "Check for stable updates only" -msgstr "" +msgid "General" +msgstr "Általános" msgid "Metric" msgstr "Metrikus" @@ -6512,6 +7482,18 @@ msgstr "Angolszász" msgid "Units" msgstr "Mértékegység" +msgid "Home" +msgstr "Haza" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Enable dark mode" +msgstr "Sötét mód engedélyezése" + msgid "Allow only one Snapmaker Orca instance" msgstr "" @@ -6531,13 +7513,103 @@ msgid "" "instead." msgstr "" -msgid "Home" -msgstr "Haza" +msgid "Show splash screen" +msgstr "Splash screen meglenítése" -msgid "Default Page" +msgid "Show the splash screen during startup." msgstr "" -msgid "Set the page opened on startup." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Automatikus biztonsági mentés" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" + +msgid "Preset" +msgstr "Beállítás" + +msgid "Remember printer configuration" +msgstr "" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Összes" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" msgstr "" msgid "Touchpad" @@ -6552,15 +7624,19 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" -msgstr "Zoom to mouse position" +msgstr "" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." msgid "Use free camera" msgstr "Szabad kamera használata" @@ -6570,101 +7646,115 @@ msgstr "" "Ha engedélyezve van, szabad kamerát használ. Ha nincs engedélyezve, akkor " "kötött kamerát használ." +msgid "Swap pan and rotate mouse buttons" +msgstr "Felcserélt pásztázás és forgatás egérgombok" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Ha engedélyezve van, felcseréli a bal és jobb egérgomb pásztázási és " +"forgatási funkcióit." + msgid "Reverse mouse zoom" msgstr "" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" -msgid "Show splash screen" -msgstr "Splash screen meglenítése" - -msgid "Show the splash screen during startup." +msgid "Clear my choice on..." msgstr "" -msgid "Show \"Tip of the day\" notification after start" -msgstr "A nap tippje értesítés megjelenítése indítás után" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Ha engedélyezve van, hasznos tippek jelennek meg indításkor." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Unsaved projects" msgstr "" -"Öblítési mennyiség: Automatikus kiszámításra kerül minden színcserekor." -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Clear my choice on the unsaved projects." msgstr "" -"Ha engedélyezve van, automatikusan kiszámításra kerül minden színcsere " -"alkalmával." -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." +msgid "Unsaved presets" +msgstr "" -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" +msgid "Clear my choice on the unsaved presets." +msgstr "" -msgid "Remember printer configuration" +msgid "Synchronizing printer preset" msgstr "" msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -msgid "Multi-device Management(Take effect after restarting Orca)." +msgid "Login region" +msgstr "Régió" + +msgid "Stealth mode" msgstr "" msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." msgstr "" -msgid "Auto sync user presets(Printer/Filament/Process)" +msgid "Network test" +msgstr "Hálózati teszt" + +msgid "Test" +msgstr "Teszt" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "" "Felhasználói beállítások automatikus szinkronizálása (Nyomtató/Filament/" "Folyamat)" -msgid "User Sync" -msgstr "Felhasználó szinkronizálás" - msgid "Update built-in Presets automatically." -msgstr "Update built-in presets automatically." +msgstr "" -msgid "System Sync" -msgstr "System Sync" +msgid "Network plugin" +msgstr "" -msgid "Clear my choice on the unsaved presets." -msgstr "Clear my choice on the unsaved presets." +msgid "Enable network plugin" +msgstr "" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" msgid "Associate files to Snapmaker Orca" msgstr "Fájlok társítása a Snapmaker Orcahoz" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr ".3mf fájlok társítása a Snapmaker Orcahoz" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Ha engedélyezve van, a Snapmaker Orca-t állítja be alapértelmezett " -"alkalmazásként a .3mf fájlok megnyitásához" +"alkalmazásként a 3MF file fájlok megnyitásához" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr ".stl fájlok társítása a Snapmaker Orcahoz" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Ha engedélyezve van, a Snapmaker Orca-t állítja be alapértelmezett " "alkalmazásként az .stl fájlok megnyitásához" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr ".step/.stp fájlok társítása a Snapmaker Orcahoz" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Ha engedélyezve van, a Snapmaker Orca-t állítja be alapértelmezett " "alkalmazásként a .step fájlok megnyitásához" @@ -6672,56 +7762,51 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "" -msgid "Associate URLs to Snapmaker Orca" +msgid "Developer" msgstr "" -msgid "Maximum recent projects" -msgstr "Maximum recent projects" - -msgid "Maximum count of recent projects" -msgstr "Maximum count of recent projects" - -msgid "Clear my choice on the unsaved projects." -msgstr "Clear my choice on the unsaved projects." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No warnings when loading 3MF with modified G-code" - -msgid "Auto-Backup" -msgstr "Automatikus biztonsági mentés" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Backup your project periodically to help with restoring from an occasional " -"crash." - -msgid "every" -msgstr "every" - -msgid "The peroid of backup in seconds." -msgstr "The period of backup in seconds." - -msgid "Downloads" -msgstr "Letöltések" - -msgid "Dark Mode" -msgstr "Sötét mód" - -msgid "Enable Dark mode" -msgstr "Sötét mód engedélyezése" - msgid "Develop mode" msgstr "Fejlesztői mód" msgid "Skip AMS blacklist check" -msgstr "Skip AMS blacklist check" +msgstr "" -msgid "Home page and daily tips" -msgstr "Kezdőoldal és napi tippek" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Kezdőlap megjelenítése indításkor" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Naplózási szint" + +msgid "fatal" +msgstr "súlyos" + +msgid "error" +msgstr "hiba" + +msgid "warning" +msgstr "figyelmeztetés" + +msgid "debug" +msgstr "debug" + +msgid "trace" +msgstr "követés" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Szinkronizálási beállítások" @@ -6754,31 +7839,13 @@ msgid "Mouse wheel reverses when zooming" msgstr "Görgetési irány megfordítása nagyítás közben" msgid "Enable SSL(MQTT)" -msgstr "Enable SSL(MQTT)" +msgstr "" msgid "Enable SSL(FTP)" -msgstr "Enable SSL(FTP)" +msgstr "" msgid "Internal developer mode" -msgstr "Internal developer mode" - -msgid "Log Level" -msgstr "Naplózási szint" - -msgid "fatal" -msgstr "súlyos" - -msgid "error" -msgstr "hiba" - -msgid "warning" -msgstr "figyelmeztetés" - -msgid "debug" -msgstr "debug" - -msgid "trace" -msgstr "követés" +msgstr "" msgid "Host Setting" msgstr "Host beállítás" @@ -6801,10 +7868,10 @@ msgstr "debug mentés gomb" msgid "save debug settings" msgstr "hibakeresési beállítások mentése" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "DEBUG beállítások sikeresen elmentve!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Felhőkörnyezet megváltozott, kérjük, jelentkezz be újra!" msgid "System presets" @@ -6816,14 +7883,20 @@ msgstr "Felhasználói beállítások" msgid "Incompatible presets" msgstr "Nem kompatibilis beállítások" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS filamentek" -msgid "Click to pick filament color" -msgstr "Kattints a filament szín kiválasztásához" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Please choose the filament color" +msgid "Click to select filament color" +msgstr "Kattints a filament szín kiválasztásához" msgid "Add/Remove presets" msgstr "Beállítások hozzáadása/eltávolítása" @@ -6834,47 +7907,68 @@ msgstr "Beállítás módosítása" msgid "Project-inside presets" msgstr "Projekten belüli beállítások" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Filament hozzáadása/eltávolítása" msgid "Add/Remove materials" msgstr "Anyagok hozzáadása/eltávolítása" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Nyomtatók kiválasztása/eltávolítása (rendszerbeállítások)" msgid "Create printer" msgstr "Nyomtató létrehozása" +msgid "Empty" +msgstr "Üres" + +msgid "Incompatible" +msgstr "" + msgid "The selected preset is null!" msgstr "A kiválasztott beállítás nulla!" msgid "End" -msgstr "End" +msgstr "" msgid "Customize" msgstr "Testreszabás" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "" msgid "Plate name" -msgstr "Plate name" +msgstr "" + +msgid "Same as Global Plate Type" +msgstr "" + +msgid "Bed type" +msgstr "Asztaltípus" msgid "Same as Global Print Sequence" -msgstr "Same as Global Print Sequence" +msgstr "" msgid "Print sequence" msgstr "Nyomtatás sorrendje" msgid "Same as Global" -msgstr "Same as Global" +msgstr "" msgid "Disable" -msgstr "Disable" +msgstr "" msgid "Spiral vase" msgstr "Spirál (váza)" @@ -6882,9 +7976,6 @@ msgstr "Spirál (váza)" msgid "First layer filament sequence" msgstr "Kezdőréteg filament sorrendje" -msgid "Same as Global Plate Type" -msgstr "Same as Global Plate Type" - msgid "Same as Global Bed Type" msgstr "Ugyanaz, mint a globális tálca típusa" @@ -6903,28 +7994,28 @@ msgstr "Log Out" msgid "Slice all plate to obtain time and filament estimation" msgstr "Szeleteld fel az összes tálcát az idő és a filament becsléséhez" -msgid "Packing project data into 3mf file" -msgstr "Projektadatok csomagolása 3mf fájlba" +msgid "Packing project data into 3MF file" +msgstr "Projektadatok csomagolása 3MF fájlba" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "3mf feltöltése" msgid "Jump to model publish web page" msgstr "Ugrás a modell közzététele weboldalra" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Megjegyzés: Az előkészítés több percig is eltarthat. Kérjük várj." msgid "Publish" msgstr "Közzététel" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "A közzététel törlésre került" msgid "Slicing Plate 1" msgstr "1. tálca szeletelése" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Adatok csomagolása 3mf-be" msgid "Jump to webpage" @@ -6943,7 +8034,7 @@ msgstr "Projekt a beállításon belül" msgid "Name is unavailable." msgstr "A név nem elérhető." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "A rendszerprofil felülírása nem engedélyezett" #, boost-format @@ -6951,10 +8042,12 @@ msgid "Preset \"%1%\" already exists." msgstr "A(z) \"%1%\" már létezik." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "A(z) \"%1%\" már létezik és nem kompatibilis a jelenlegi nyomtatóval." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "Figyelem, a mentési művelet lecseréli ezt a beállítást" msgid "The name cannot be the same as a preset alias name." @@ -6990,121 +8083,87 @@ msgstr "Csak válts a(z) \"%1%\"-ra" msgid "Task canceled" msgstr "Feladat törölve" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Keresés" - -msgid "My Device" -msgstr "Saját eszköz" - -msgid "Other Device" -msgstr "Egyéb eszköz" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Add meg a hozzáférési kódot" - -msgid "Can't find my devices?" -msgstr "Nem találod az eszközöket?" - -msgid "Log out successful." -msgstr "Sikeres kijelentkezés." - -msgid "Busy" -msgstr "Elfoglalt" - msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate" +msgstr "" msgid "PLA Plate" -msgstr "PLA Plate" +msgstr "" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "" msgid "Bambu Smooth PEI Plate" msgstr "" msgid "High temperature Plate" -msgstr "High Temperature Plate" +msgstr "" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" -msgstr "Nyomtatási feladat küldése" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Áramlásdinamikai kalibrálás" -msgid "Click here if you can't connect to the printer" -msgstr "Kattints ide, ha nem tudsz csatlakozni a nyomtatóhoz" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "küldés befejezve" msgid "Error code" -msgstr "Error code" - -msgid "No login account, only printers in LAN mode are displayed" msgstr "" -"Nincs bejelentkezési fiók, csak a LAN módban lévő nyomtatók jelennek meg" -msgid "Connecting to server" -msgstr "Csatlakozás a szerverhez" - -msgid "Synchronizing device information" -msgstr "Eszközinformációk szinkronizálása" - -msgid "Synchronizing device information time out" -msgstr "Eszközinformációk szinkronizálása túllépte az időkorlátot" - -msgid "Cannot send the print job when the printer is updating firmware" +msgid "High Flow" msgstr "" -"Nem küldhetsz nyomtatási feladatot a nyomtatóra, amíg az firmware frissítést " -"végez." - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"A nyomtató elfoglalt. Kérjük, indítsd újra a nyomtatást a nyomtatás " -"befejezése után" - -msgid "The printer is busy on other print job" -msgstr "A nyomtató egy másik nyomtatási feladattal van elfoglalva." #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"%s filament nem fér el a rendelkezésre álló AMS-férőhelyben. Kérjük, " -"frissítsd a nyomtató szoftverét az AMS-kiosztás támogatásához." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"A filament nem fér el a rendelkezésre álló AMS-férőhelyben. Kérjük, " -"frissítsd a nyomtató szoftverét az AMS-kiosztás támogatásához." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Megtörtént a filamentek AMS férőhelyekhez való kiosztása. Kattints egy fenti " -"filamentre az AMS kiosztás megváltoztatásához" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Kérjük, a nyomtatás megkezdése előtt kattints a fenti filamentekre, hogy " -"megadd a hozzájuk tartozó AMS férőhelyet" #, c-format, boost-format msgid "" @@ -7121,39 +8180,12 @@ msgstr "" "A filament típusa nem egyezik az AMS-férőhelyben találhatóval. Kérjük, " "frissítsd a nyomtató szoftverét az AMS-kiosztás támogatásához." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"A nyomtató firmware-je csak a szekvenciális filamentkiosztást támogatja = > " -"AMS férőhely" - -msgid "An SD card needs to be inserted before printing." -msgstr "Nyomtatás előtt be kell helyezned egy microSD kártyát." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "A timelapse rögzítéséhez egy microSD kártyára van szükség." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Nem küldhetsz nyomtatási feladatot a nyomtatóra, mert annak firmware-jét " -"frissíteni kell." - -msgid "Cannot send the print job for empty plate" -msgstr "Nem küldhetsz nyomtatási feladatot egy üres tálcával." - -msgid "This printer does not support printing all plates" -msgstr "Ez a nyomtató nem támogatja az összes tálcára való nyomtatást" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7163,25 +8195,28 @@ msgstr "" "generate timelapse videos." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"A timelapse nem támogatott ebben a módban, mert a nyomtatási sorrend " -"„Tárgyanként” értékre van állítva." msgid "Errors" msgstr "Hibák" -msgid "Please check the following:" -msgstr "Please check the following:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " @@ -7192,63 +8227,221 @@ msgstr "" "ezek a szükséges filamentek. Ha igen, kattints a „Megerősítés” gombra a " "nyomtatás megkezdéséhez." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "fúvóka a beállításban: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "eltárolt fúvóka: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." +msgid "Please check the following:" msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Please click the confirm button if you still want to proceed with printing." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Csatlakozás a nyomtatóhoz. A csatlakozási folyamatot nem lehetett " -"megszakítani." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Figyelem! A „Textured PEI“ tálcán való áramláskalibrálás a durva felület " -"miatt hamis eredményeket adhat." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatic flow calibration using the Micro Lidar" +msgid "Preparing print job" +msgstr "Nyomtatási feladat előkészítése" -msgid "Modifying the device name" -msgstr "Eszköz nevének módosítása" +msgid "The name length exceeds the limit." +msgstr "" -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Küldés a nyomtatóban lévő MicroSD kártyára" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Kattints ide, ha nem tudsz csatlakozni a nyomtatóhoz" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Nincs bejelentkezési fiók, csak a LAN módban lévő nyomtatók jelennek meg" + +msgid "Connecting to server..." +msgstr "Csatlakozás a szerverhez" + +msgid "Synchronizing device information..." +msgstr "Eszközinformációk szinkronizálása" + +msgid "Synchronizing device information timed out." +msgstr "Eszközinformációk szinkronizálása túllépte az időkorlátot" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Nem küldhetsz nyomtatási feladatot a nyomtatóra, amíg az firmware frissítést " +"végez." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"A nyomtató elfoglalt. Kérjük, indítsd újra a nyomtatást a nyomtatás " +"befejezése után" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Nem küldhetsz nyomtatási feladatot a nyomtatóra, mert annak firmware-jét " +"frissíteni kell." + +msgid "Cannot send a print job for an empty plate." +msgstr "Nem küldhetsz nyomtatási feladatot egy üres tálcával." + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Ez a nyomtató nem támogatja az összes tálcára való nyomtatást" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7258,16 +8451,15 @@ msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "A nyomtató nem kompatibilis a kiválasztott nyomtatóbeállításokkal." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"A MicroSD card needs to be inserted before sending to the printer SD card." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" "A nyomtatónak ugyanazon a hálózaton kell lennie, mint a Bambu Studiónak." -msgid "The printer does not support sending to printer SD card." -msgstr "A nyomtató nem támogatja a MicroSD kártyára küldést." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Szeletelés kész." @@ -7276,28 +8468,28 @@ msgid "View all Daily tips" msgstr "Napi tippek megtekintése" msgid "Failed to create socket" -msgstr "Failed to create socket" +msgstr "" msgid "Failed to connect socket" -msgstr "Failed to connect socket" +msgstr "" msgid "Failed to publish login request" -msgstr "Failed to publish login request" +msgstr "" msgid "Get ticket from device timeout" -msgstr "Timeout getting ticket from device" +msgstr "" msgid "Get ticket from server timeout" -msgstr "Timeout getting ticket from server" +msgstr "" msgid "Failed to post ticket to server" -msgstr "Failed to post ticket to server" +msgstr "" msgid "Failed to parse login report reason" -msgstr "Failed to parse login report reason" +msgstr "" msgid "Receive login report timeout" -msgstr "Receive login report timeout" +msgstr "" msgid "Unknown Failure" msgstr "Ismeretlen hiba" @@ -7306,63 +8498,56 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "" msgid "Pin Code" -msgstr "Pin Code" +msgstr "" msgid "Binding..." -msgstr "Binding..." +msgstr "" msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "" msgid "Log in printer" msgstr "Bejelentkezés a nyomtatóra" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Szeretnél bejelentkezni a nyomtatóra a jelenlegi fiókkal?" msgid "Check the reason" -msgstr "Check the reason" +msgstr "" msgid "Read and accept" -msgstr "Read and accept" +msgstr "" msgid "Terms and Conditions" -msgstr "Terms and Conditions" +msgstr "" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " "device, please read the terms and conditions. By clicking to agree to use " "your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " "Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" msgid "and" -msgstr "and" +msgstr "" msgid "Privacy Policy" -msgstr "Privacy Policy" +msgstr "" msgid "We ask for your help to improve everyone's printer" -msgstr "We ask for your help to improve everyone's printer" +msgstr "" msgid "Statement about User Experience Improvement Program" -msgstr "Statement about User Experience Improvement Program" +msgstr "" #, c-format, boost-format msgid "" @@ -7372,26 +8557,15 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." msgid "Statement on User Experience Improvement Plan" -msgstr "Statement on User Experience Improvement Plan" +msgstr "" msgid "Log in successful." msgstr "Sikeres bejelentkezés." @@ -7427,14 +8601,29 @@ msgstr "" "Kattints az összes beállítás utolsó mentett változatának visszaállításához." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "A sima timelapse miatt szükség van a törlőtoronyra. Nélküle előfordulhatnak " "hibák a nyomtatott tárgyon. Biztos, hogy kikapcsolod a törlőtornyot?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "A sima timelapse miatt szükség van a törlőtoronyra. Nélküle előfordulhatnak " @@ -7444,17 +8633,19 @@ msgid "Still print by object?" msgstr "Továbbra is tárgyanként szeretnél nyomtatni?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Kísérleti jelleggel hozzáadtunk egy \"Tree Slim\" nevű támaszt, amely " -"kevesebb anyagot igényel, de emiatt gyengébb szilárdságú.\n" -"Használatát a következőkkel javasoljuk: 0 érintkezőréteg, 0 felső távolság, " -"2 fal." msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7463,24 +8654,12 @@ msgstr "" "Nem - Ne változtassa meg a beállításokat" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Az „Erős fa” és a „Hibrid fa” támaszok esetében a következő beállításokat " -"javasoljuk: legalább 2 érintkező réteg, legalább 0,1 mm felső Z-távolság " -"vagy támaszanyag használata." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"When using support material for the support interface, we recommend the " -"following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7491,6 +8670,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7498,15 +8685,15 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "A rétegmagasság meghaladja a Nyomtatóbeállítások -> Extruder -> " "Rétegmagasság limitek menüpontban megadott értéket, ez minőségbeli " "problémákat okozhat a nyomtatás során." -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "" -"Szeretnéd az értéket automatikusan a beállított tartományhoz igazítani? \n" +"Szeretnéd az értéket automatikusan a beállított tartományhoz igazítani?\n" msgid "Adjust" msgstr "Módosítás" @@ -7516,25 +8703,17 @@ msgstr "Mellőzés" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7547,6 +8726,80 @@ msgstr "" "gombbal a tálca egy üres részére, majd válaszd a „Primitív hozzáadása“ -> " "„Timelapse törlőtorony“ lehetőséget." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Létrejön az aktuális rendszer-előbeállítás másolata, amely leválik a " +"rendszer-előbeállításról." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Az aktuális egyéni-előbeállítás leválik a szülő rendszer-előbeállításáról." + +msgid "Modifications to the current profile will be saved." +msgstr "Az aktuális profil módosításai mentésre kerülnek." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Ez a művelet nem visszavonható.\n" +"Akarja folytatni?" + +msgid "Detach preset" +msgstr "Előbeállítás leválasztása" + +msgid "This is a default preset." +msgstr "Ez az alapértelmezett előbeállítás." + +msgid "This is a system preset." +msgstr "Ez a rendszer előbeállítás." + +msgid "Current preset is inherited from the default preset." +msgstr "Az aktuális előbeállítás az alapértelmezett előbeállítástól öröklődik." + +msgid "Current preset is inherited from" +msgstr "Az aktuális előbeállítás innen öröklődik" + +msgid "It can't be deleted or modified." +msgstr "Ezt nem lehet törölni vagy módosítani." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "Minden módosítást új, ettől örökölt előbeállításként kell elmenteni." + +msgid "To do that please specify a new name for the preset." +msgstr "Ehhez adjon meg egy új nevet az előbeállításnak." + +msgid "Additional information:" +msgstr "További információ:" + +msgid "vendor" +msgstr "gyártó" + +msgid "printer model" +msgstr "nyomtató modell" + +msgid "default print profile" +msgstr "alapértelmezett nyomtató profil" + +msgid "default filament profile" +msgstr "alapértelmezett filament profil" + +msgid "default SLA material profile" +msgstr "alapértelmezett SLA anyag profil" + +msgid "default SLA print profile" +msgstr "alapértelmezett SLA nyomtatási profil" + +msgid "full profile name" +msgstr "teljes profil név" + +msgid "symbolic profile name" +msgstr "szimbolikus profil név" + msgid "Line width" msgstr "Nyomtatott vonal szélessége" @@ -7613,15 +8866,27 @@ msgstr "Tutaj" msgid "Support filament" msgstr "Filament a támaszhoz" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "" -msgid "Skirt" -msgstr "Szoknya" +msgid "Multimaterial" +msgstr "" msgid "Prime tower" msgstr "Törlő torony" +msgid "Filament for Features" +msgstr "" + +msgid "Ooze prevention" +msgstr "Szivárgás megelőzés" + +msgid "Skirt" +msgstr "Szoknya" + msgid "Special mode" msgstr "Speciális mód" @@ -7629,10 +8894,10 @@ msgid "G-code output" msgstr "G-kód kimenet" msgid "Post-processing Scripts" -msgstr "Post-processing Scripts" +msgstr "" msgid "Notes" -msgstr "Notes" +msgstr "" msgid "Frequent" msgstr "Gyakori" @@ -7675,64 +8940,72 @@ msgstr "" "Az ajánlott fúvóka hőmérséklet-tartomány ehhez a filamenthez. A 0 azt " "jelenti, hogy nincs beállítva" +msgid "Flow ratio and Pressure Advance" +msgstr "" + msgid "Print chamber temperature" msgstr "" msgid "Print temperature" msgstr "Nyomtatási hőmérséklet" -msgid "Nozzle" -msgstr "Fúvóka" - msgid "Nozzle temperature when printing" msgstr "Fúvóka hőmérséklete nyomtatáskor" -msgid "Cool plate" -msgstr "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" +msgstr "" + +msgid "" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Asztalhőmérséklet a hideg tálca használatával. A 0 érték azt jelenti, hogy a " "filament nem támogatja a Cool Plate-re történő nyomtatást" -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -msgid "Engineering plate" -msgstr "Engineering plate" +msgid "Engineering Plate" +msgstr "" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Asztalhőmérséklet a mérnöki tálca használatával. A 0 érték azt jelenti, hogy " "a filament nem támogatja az Engineering Plate-re történő nyomtatást" msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Smooth PEI Plate / High Temp Plate" +msgstr "" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Az asztal hőmérséklete Smooth PEI / High Temperature tálca használatakor. A " "0 érték azt jelenti, hogy a filament nem támogatja Smooth PEI / High " "Temperature tálcára történő nyomtatást" msgid "Textured PEI Plate" -msgstr "Textured PEI Plate" +msgstr "" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Asztalhőmérséklet a texturált PEI tálca használatával. A 0 érték azt " "jelenti, hogy a filament nem támogatja a High Temp Plate-re történő " @@ -7741,9 +9014,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Volumetrikus sebességhatár" -msgid "Cooling" -msgstr "Hűtés" - msgid "Cooling for specific layer" msgstr "Hűtés a megadott rétegtől" @@ -7793,26 +9063,35 @@ msgstr "Filament kezdő G-kód" msgid "Filament end G-code" msgstr "Filament befejező G-kód" -msgid "Multimaterial" -msgstr "" - msgid "Wipe tower parameters" msgstr "Törlőtorony paraméterek" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "" "Szerszámváltási paraméterek egy extruderes Több Anyagos (MM) nyomtatónál" -msgid "Ramming settings" -msgstr "Tömörítési beállítások" +msgid "Set" +msgstr "Beállít" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "" +msgid "Dependencies" +msgstr "Függőségek" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Kompatibilis folyamatprofilok" + msgid "Printable space" msgstr "Nyomtatási terület" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "" @@ -7835,7 +9114,7 @@ msgstr "" msgid "Accessory" msgstr "Tartozékok" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "Gép G-kód" msgid "Machine start G-code" @@ -7853,9 +9132,12 @@ msgstr "Rétegváltás előtti G-kód" msgid "Layer change G-code" msgstr "Rétegváltás G-kód" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "Timelapse G-kód" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "Filament csere G-kód" @@ -7874,6 +9156,12 @@ msgstr "Géplimitek" msgid "Normal" msgstr "Normál" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Sebesség limitek" @@ -7883,19 +9171,37 @@ msgstr "Gyorsulási limitek" msgid "Jerk limitation" msgstr "Jerk limitek" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "" +msgid "Number of extruders of the printer." +msgstr "A nyomtató Extrudereinek száma." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" + +msgid "Nozzle diameter" +msgstr "Fúvóka átmérője" + msgid "Wipe tower" msgstr "Törlőtorony" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Egyetlen extruder többanyagú paraméterei" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" + msgid "Layer height limits" msgstr "Rétegmagasság limitek" -msgid "Lift Z Enforcement" +msgid "Z-Hop" msgstr "" msgid "Retraction when switching material" @@ -7913,6 +9219,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Firmware-ben megadott visszahúzás" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Különálló" @@ -7924,7 +9238,7 @@ msgstr "" "A(z) %d filamentbeállítás és a(z) %d folyamatbeállítás ehhez a nyomtatóhoz " "kapcsolódik. Ha törlöd a nyomtatót, akkor ezek a beállítások is törlődnek." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "A más beállítások által örökölt beállítások nem törölhetők!" msgid "The following presets inherit this preset." @@ -7942,24 +9256,17 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "A következő beállítás szintén törlődni fog." msgstr[1] "A következő beállítások szintén törlődni fognak." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Biztosan törlöd a kiválasztott beállítást? \n" -"Ha ez a filament jelenleg használatban van a nyomtatón, kérjük, töröld az " -"adott férőhelyen a filamentadatokat." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Biztos, hogy %1% a kiválasztott beállítást?" -msgid "All" -msgstr "Összes" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Beállít" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8053,15 +9360,13 @@ msgstr "" "következő elmentetlen változásokat tartalmazza:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "" msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" -"\n" -"You can save or discard the preset values you have modified." msgid "" "\n" @@ -8070,7 +9375,7 @@ msgid "" msgstr "" msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "" msgid "" "\n" @@ -8081,9 +9386,6 @@ msgstr "" msgid "Extruders count" msgstr "Extruderek száma" -msgid "General" -msgstr "Általános" - msgid "Capabilities" msgstr "Képességek" @@ -8091,7 +9393,7 @@ msgid "Show all presets (including incompatible)" msgstr "Minden beállítás megjelenítése (beleértve az inkompatibiliseket is)" msgid "Select presets to compare" -msgstr "Select presets to compare" +msgstr "" msgid "" "You can only transfer to current active profile because it has been modified." @@ -8142,6 +9444,9 @@ msgstr "Szerző" msgid "Model Name" msgstr "Modellnév" +msgid "Description:" +msgstr "Leírás:" + #, c-format, boost-format msgid "%s Update" msgstr "%s frissítés" @@ -8152,22 +9457,19 @@ msgstr "Új verzió érhető el" msgid "Configuration update" msgstr "Konfiguráció frissítés" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Új konfigurációs csomag elérhető, szeretnéd telepíteni?" -msgid "Description:" -msgstr "Leírás:" - msgid "Configuration incompatible" msgstr "Nem kompatibilis konfiguráció" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "a konfigurációs csomag nem kompatibilis a jelenlegi alkalmazással." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "A konfigurációs csomag nem kompatibilis a jelenlegi alkalmazással.\n" "%s frissíti a konfigurációs csomagot, hogy az alkalmazás elindulhasson." @@ -8176,10 +9478,6 @@ msgstr "" msgid "Exit %s" msgstr "Kilépés %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"A konfigurációs csomag nem kompatibilis a Snapmaker Orca jelenlegi verziójával." - msgid "Configuration updates" msgstr "Konfiguráció frissítések" @@ -8189,59 +9487,218 @@ msgstr "Nincs elérhető frissítés." msgid "The configuration is up to date." msgstr "A konfiguráció naprakész." -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "" -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "" msgid "Append" -msgstr "Append" +msgstr "" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "" -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"A timelapse nem támogatott ebben a módban, mert a nyomtatási sorrend " +"„Tárgyanként” értékre van állítva." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" msgstr "Tömörítés testreszabása" @@ -8268,33 +9725,23 @@ msgstr "" "Ez egy szakértői szintű beállítás, a helytelen beállítás elakadásokhoz, az " "extruder kerék filamentbe marásához stb. vezethet." -msgid "Total ramming time" -msgstr "Teljes tömörítési idő" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" -msgid "s" -msgstr "mp" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Teljes tömörített térfogat" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Tömörítési vonal szélessége" - -msgid "Ramming line spacing" -msgstr "Tömörítési vonal térköze" - -msgid "Auto-Calc" -msgstr "Automatikus számítás" - -msgid "Re-calculate" -msgstr "Újraszámítás" - -msgid "Flushing volumes for filament change" -msgstr "Filament csere tiszítási mennyisége" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -8308,23 +9755,23 @@ msgstr "Javaslat: öblítési érték a [%d, %d] tartományban" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "A szorzónak [%.2f, %.2f] tartományban kell lennie." +msgid "Re-calculate" +msgstr "Újraszámítás" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Szorzó" -msgid "unloaded" -msgstr "unloaded" +msgid "Flushing volumes for filament change" +msgstr "Filament csere tiszítási mennyisége" -msgid "loaded" -msgstr "betöltve" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Ettől:" - -msgid "To" -msgstr "Eddig:" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8338,7 +9785,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -8348,7 +9795,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" @@ -8374,13 +9821,7 @@ msgid "Objects list" msgstr "Objektumok listája" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files" - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "" msgid "Paste from clipboard" msgstr "Beillesztés a vágólapról" @@ -8397,69 +9838,42 @@ msgstr "Gyorsgombok listájának megjelenítése" msgid "Global shortcuts" msgstr "Globális gyorsbillentyűk" -msgid "Rotate View" -msgstr "Nézet elforgatása" - msgid "Pan View" msgstr "Pásztázó nézet" -msgid "Mouse wheel" -msgstr "Egérgörgő" +msgid "Rotate View" +msgstr "Nézet elforgatása" msgid "Zoom View" msgstr "Nagyítás nézet" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Automatikusan beállítja a kijelölt objektumok vagy az összes objektum " "tájolását. Ha vannak kijelölt objektumok, akkor csak a kijelölteket, " -"ellenkező esetben az aktuális tálcán lévő összes objektumot orientálja." +"ellenkező esetben pedig a projektben levő összes objektumot orientálja." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Automatikusan orientálja az aktuális tálcán levő összes objektumot." msgid "Collapse/Expand the sidebar" msgstr "Az oldalsáv összecsukása/kinyitása" -msgid "⌘+Any arrow" -msgstr "⌘+Bármilyen nyíl gomb" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Mozgás a kameratérben" -msgid "⌥+Left mouse button" -msgstr "⌥+Bal egérgomb" - msgid "Select a part" msgstr "Válassz egy tárgyat" -msgid "⌘+Left mouse button" -msgstr "⌘+Bal egérgomb" - msgid "Select multiple objects" msgstr "Több objektum kijelölése" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Bármelyik nyílgomb" - -msgid "Alt+Left mouse button" -msgstr "Alt+bal egérgomb" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Bal egérgomb" - -msgid "Shift+Left mouse button" -msgstr "Shift+Bal egérgomb" - msgid "Select objects by rectangle" msgstr "Objektumok kijelölése téglalapok alapján" @@ -8487,9 +9901,6 @@ msgstr "Jobbra nyíl" msgid "Move selection 10 mm in positive X direction" msgstr "Kijelölés mozgatása 10 mm-rel pozitív X irányban" -msgid "Shift+Any arrow" -msgstr "Shift+Bármelyik nyílgomb" - msgid "Movement step set to 1 mm" msgstr "Mozgatás lépéstávolsága 1mm-re állítva" @@ -8521,28 +9932,43 @@ msgid "Select all objects" msgstr "Összes objektum kijelölése" msgid "Gizmo move" -msgstr "Gizmo move" - -msgid "Gizmo scale" -msgstr "Gizmo scale" +msgstr "Gizmo mozgatás" msgid "Gizmo rotate" -msgstr "Gizmo rotate" +msgstr "Gizmo forgatás" + +msgid "Gizmo scale" +msgstr "Gizmo átméretezés" + +msgid "Gizmo place face on bed" +msgstr "Gizmo felület tárgyasztalra illesztése" msgid "Gizmo cut" -msgstr "Gizmo cut" +msgstr "Gizmo vágás" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Place face on bed" +msgid "Gizmo mesh boolean" +msgstr "Gizmo modellháló logikai műveletek" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "Gizmo SLA support points" +msgstr "Gizmo SLA támaszpontok" msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM paint-on seam" +msgstr "Gizmo FDM varrat festés" -msgid "Gizmo Text emboss / engrave" -msgstr "" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo szöveg dombornyomás/gravírozás" + +msgid "Gizmo measure" +msgstr "Gizmo mérés" + +msgid "Gizmo assemble" +msgstr "Gizmo összeállítás" + +msgid "Gizmo brim ears" +msgstr "Gizmo karimás fülek" msgid "Zoom in" msgstr "Zoom közelítés" @@ -8551,40 +9977,28 @@ msgid "Zoom out" msgstr "Zoom távolítás" msgid "Switch between Prepare/Preview" -msgstr "" +msgstr "Váltás előkészítés/előnézet között" msgid "Plater" -msgstr "Plater" +msgstr "" msgid "Move: press to snap by 1mm" -msgstr "Move: press to snap by 1mm" - -msgid "⌘+Mouse wheel" -msgstr "⌘+Egérgörgő" +msgstr "" msgid "Support/Color Painting: adjust pen radius" msgstr "Támasz/Színfestés: toll méretének beállítása" -msgid "⌥+Mouse wheel" -msgstr "⌥+Egérgörgő" - msgid "Support/Color Painting: adjust section position" msgstr "Támasz/Színfestés: metszet pozíciójának beállítása" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Egérgörgő" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Egérgörgő" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Extruder szám beállítása az objektumok és tárgyak számára" -msgid "Delete objects, parts, modifiers " -msgstr "Objektumok, tárgyak, módosítók törlése " +msgid "Delete objects, parts, modifiers" +msgstr "Objektumok, tárgyak, módosítók törlése" msgid "Select the object/part and press space to change the name" msgstr "" @@ -8617,15 +10031,12 @@ msgstr "Vízszintes csúszka - Az aktív csúszka jobbra mozgatása" msgid "On/Off one layer mode of the vertical slider" msgstr "Függőleges csúszka egyréteges módjának ki/bekapcsolása" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "" msgid "Move slider 5x faster" msgstr "Csúszka 5x gyorsabb mozgatása" -msgid "Shift+Mouse wheel" -msgstr "Shift+Egérgörgő" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8636,7 +10047,7 @@ msgid "Release Note" msgstr "Verzióinformáció" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "%s verzió frissítési információi:" msgid "Network plug-in update" @@ -8649,7 +10060,7 @@ msgstr "" "következő indításakor." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Új hálózati bővítmény (%s) érhető el. Szeretnéd telepíteni?" msgid "New version of Snapmaker Orca" @@ -8658,63 +10069,29 @@ msgstr "A Snapmaker Orca új verziója" msgid "Skip this Version" msgstr "Verzió kihagyása" -msgid "Done" -msgstr "Done" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Filament betöltés" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" - msgid "Confirm and Update Nozzle" msgstr "Fúvóka lecserélésének megerősítése" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN kapcsolódás sikertelen (nyomtatási fájl küldése)" +msgid "Connect the printer using IP and access code" +msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"1. lépés: Ellenőrizd, hogy a Snapmaker Orca és a nyomtató ugyanazon a helyi " -"hálózaton van." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"2. lépés: Ha az alábbi IP és hozzáférési kód eltér a nyomtatón láthatótól, " -"kérjük, javítsd ki őket." msgid "IP" msgstr "IP" @@ -8722,20 +10099,42 @@ msgstr "IP" msgid "Access Code" msgstr "Hozzáférési kód" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "Hol találom a nyomtató IP címét és a hozzáférési kódot?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" msgstr "" -"3. lépés: Pingeld meg az IP-címet a csomagveszteség és késleltetés " -"ellenőrzéséhez." -msgid "Test" -msgstr "Teszt" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "IP és hozzáférési kód leellenőrizve! Bezárhatod az ablakot" +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" + msgid "Connection failed, please double check IP and Access Code" msgstr "" "Sikertelen kapcsolódás, kérjük, ellenőrizd az IP-t és a hozzáférési kódot" @@ -8747,31 +10146,51 @@ msgstr "" "Sikertelen kapcsolódás! Ha az IP-cím és a hozzáférési kód helyes,\n" "folytasd a 3. lépéssel a hálózati problémák elhárításához" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Modell:" -msgid "Serial:" -msgstr "Sorozatszám:" - -msgid "Version:" -msgstr "Verzió:" - msgid "Update firmware" msgstr "Firmware frissítése" msgid "Beta version" msgstr "Béta verzió" -msgid "Latest version" -msgstr "Legfrissebb verzió" - msgid "Updating" msgstr "Frissítés" -msgid "Updating failed" +msgid "Update failed" msgstr "A frissítés nem sikerült" -msgid "Updating successful" +msgid "Update successful" msgstr "Sikeres frissítés" msgid "" @@ -8802,7 +10221,7 @@ msgstr "" msgid "Extension Board" msgstr "Bővítőpanel" -msgid "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." msgstr "Az objektumok mentése a 3mf-be sikertelen volt." msgid "Only Windows 10 is supported." @@ -8826,23 +10245,23 @@ msgstr "Sikertelen javítás." msgid "Loading repaired objects" msgstr "Javított objektumok betöltése" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "3MF fájl exportálása sikertelen" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "3mf fájl importálása sikertelen" -msgid "Repaired 3mf file does not contain any object" -msgstr "A megjavított 3mf fájl nem tartalmaz objektumot" +msgid "Repaired 3MF file does not contain any object" +msgstr "A megjavított 3MF fájl nem tartalmaz objektumot" -msgid "Repaired 3mf file contains more than one object" -msgstr "A megjavított 3mf fájl egynél több objektumot tartalmaz" +msgid "Repaired 3MF file contains more than one object" +msgstr "A megjavított 3MF fájl egynél több objektumot tartalmaz" -msgid "Repaired 3mf file does not contain any volume" -msgstr "A javított 3mf fájl nem tartalmaz térfogatot." +msgid "Repaired 3MF file does not contain any volume" +msgstr "A javított 3MF fájl nem tartalmaz térfogatot." -msgid "Repaired 3mf file contains more than one volume" -msgstr "The repaired 3mf file contains more than one volume." +msgid "Repaired 3MF file contains more than one volume" +msgstr "The repaired 3MF file contains more than one volume." msgid "Repair finished" msgstr "Javítás befejezve" @@ -8895,7 +10314,14 @@ msgid "No object can be printed. Maybe too small" msgstr "Objektum nem nyomtatható ki. Lehet, hogy túl kicsi." msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"A nyomtatás nagyon közel van az alapozó régiókhoz. Győződjön meg róla, hogy " +"nincs ütközés." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Nem sikerült a G-kód generálása érvénytelen egyedi G-kód miatt.\n" @@ -8910,6 +10336,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "G-kód generálása: %1% réteg" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Belső fal" @@ -8947,7 +10382,7 @@ msgid "Multiple" msgstr "Többszörös" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Nem sikerült kiszámítani %1% vonalszélességét. “%2%” értéke nem érhető el " @@ -9066,15 +10501,16 @@ msgstr "" msgid "%1% is too tall, and collisions will be caused." msgstr "%1% túl magas, a nyomtatás során előfordulhatnak ütközések." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -"túl közel van más tárgyakhoz, a nyomtatás során előfordulhatnak ütközések." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" "túl közel van a tiltott területhez, a nyomtatás során előfordulhatnak " "ütközések." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Törlő torony" @@ -9088,13 +10524,34 @@ msgstr "" "ütközések.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Nem nyomtathatsz több, nagy hőmérséklet-különbséggel rendelkező filamentet " -"egyidőben. Ellenkező esetben az extruder és a fúvóka eltömődhet vagy " -"megsérülhet nyomtatás közben" msgid "No extrusions under current settings." msgstr "A jelenlegi beállítások mellett nincsenek extrudálások." @@ -9106,6 +10563,15 @@ msgstr "" "A sima timelapse funkció nem használható, ha a nyomtatás „Tárgyanként“ " "sorrendre van állítva." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9120,6 +10586,12 @@ msgstr "" "A spirál (váza) mód nem működik, ha egy objektum egynél több anyagot " "tartalmaz." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "" @@ -9139,11 +10611,10 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "A változó rétegmagasság nem működik az organikus támaszokkal." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Nem használhatsz különböző fúvókaátmérőt és filamentátmérőt, ha a " -"törlőtorony engedélyezve van." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9153,9 +10624,9 @@ msgstr "" "(use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"A szivárgás elleni védelem nem működik, ha a törlőtorony engedélyezve van." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9165,53 +10636,64 @@ msgstr "" "Repetier G-kód szoftverekkel használható." msgid "The prime tower is not supported in \"By object\" print." -msgstr "A prime tower is not supported in “By object” print." +msgstr "" msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"A prime tower is not supported when adaptive layer height is on. It requires " -"that all objects have the same layer height." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"A prime tower requires any “support gap” to be a multiple of layer height." -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "A prime tower requires that all objects have the same layer height." +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." +msgstr "" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." msgstr "" -"A prime tower requires that all objects are printed over the same number of " -"raft layers." msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"A prime tower requires that all objects are sliced with the same layer " -"height." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "A törlőtorony használatához minden objektumnak azonos változó " "rétegmagassággal kell rendelkeznie." +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "Túl kicsi a vonalszélesség" msgid "Too large line width" msgstr "Túl nagy vonalszélesség" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"A prime tower requires that support has the same layer height as the object." +"The prime tower requires that support has the same layer height as the " +"object." msgid "" "Organic support tree tip diameter must not be smaller than support material " @@ -9234,7 +10716,7 @@ msgstr "" "Támasz kényszerítőket használtál, de a támaszok nincsenek engedélyezve. " "Kérjük, engedélyezd a támaszokat." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "A rétegmagasság nem lehet nagyobb a fúvóka átmérőjénél." msgid "" @@ -9270,6 +10752,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9288,6 +10779,16 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" + msgid "Generating skirt & brim" msgstr "Szoknya & perem generálása" @@ -9300,9 +10801,15 @@ msgstr "G-kód generálása" msgid "Failed processing of the filename_format template." msgstr "Nem sikerült feldolgozni a fájlnév_formátum sablont." +msgid "Printer technology" +msgstr "Nyomtató technológia" + msgid "Printable area" msgstr "Nyomtatható terület" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Asztal kizárási terület" @@ -9325,8 +10832,8 @@ msgid "Elephant foot compensation" msgstr "Elefántláb kompenzáció" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Zsugorítja a kezdőréteget a tárgyasztalon, hogy kompenzálja az elefántláb-" "hatást" @@ -9346,7 +10853,7 @@ msgstr "réteg" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Az egyes rétegek szeletelési magassága. A kisebb rétegmagasság pontosabb " "nyomtatást és több időt jelent" @@ -9354,15 +10861,23 @@ msgstr "" msgid "Printable height" msgstr "Nyomtatási magasság" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "" "Ez a maximális nyomtatható magasság, amelyet a nyomtatótér magassága " "korlátoz." +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -9371,7 +10886,7 @@ msgstr "Nyomtató beállítások neve" msgid "Use 3rd-party print host" msgstr "" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" msgid "Hostname, IP or URL" @@ -9394,7 +10909,7 @@ msgid "Device UI" msgstr "Eszköz UI" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Add meg az eszköz felhasználói felületének URL-címét, ha az nem azonos a " "print_host címével." @@ -9409,7 +10924,7 @@ msgstr "" "A Snapmaker Orca képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a hitelesítéshez szükséges API-kulcsot vagy jelszót." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "A nyomtató neve" msgid "HTTPS CA File" @@ -9442,7 +10957,7 @@ msgstr "" "HTTPS-tanúsítványok visszavonásának ellenőrzését. Ez az opció akkor lehet " "segítségedre, ha nem sikerül csatlakoznod egy általad aláírt tanúsítvánnyal." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "A fizikai nyomtatóhoz kapcsolódó beállítások nevei" msgid "Authorization Type" @@ -9454,21 +10969,22 @@ msgstr "API-kulcs" msgid "HTTP digest" msgstr "HTTP digest" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Kerülje a falak keresztezését" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Kerülje a falon keresztül való áthaladást, ami nyomot hagyhat a felületen" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Kerülje a falak keresztezését - Max kitérő hossza" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "A kitérő maximális hossza a fal keresztezésének elkerüléséhez: a nyomtató " "figyelmen kívül hagyja a kitérést, ha az ehhez szükséges távolság nagyobb, " @@ -9483,37 +10999,39 @@ msgid "Other layers" msgstr "Többi réteg" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Az asztal hőmérséklete a kezdőréteg kivételével. A 0 érték azt jelenti, hogy " "a filament nem támogatja a Cool Plate-re történő nyomtatást" -msgid "°C" -msgstr "°C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Az asztal hőmérséklete a kezdeti réteg kivételével. A 0 érték azt jelenti, " "hogy a szál nem támogatja az Engineering Plate-re történő nyomtatást" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Az asztal hőmérséklete a kezdeti réteg kivételével. A 0 érték azt jelenti, " "hogy a szál nem támogatja a High Temp Plate-re történő nyomtatást" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Asztalhőmérséklet az első réteg után. A 0 érték azt jelenti, hogy a filament " "nem támogatja texturált PEI tálcára történő nyomtatást." @@ -9525,66 +11043,72 @@ msgid "Initial layer bed temperature" msgstr "Első réteg asztalhőmérséklete" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem " "támogatja a Cool Plate-re történő nyomtatást" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem " "támogatja a Engineering Plate-re történő nyomtatást" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem " "támogatja a High Temp Plate-re történő nyomtatást" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Az első réteg asztalhőmérsékletének beállított 0 érték azt jelenti, hogy a " "filament nem támogatja texturált PEI tálcára történő nyomtatást." -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Nyomtató által támogatott asztaltípusok" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "Engineering Plate" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" msgstr "Az első réteg nyomtatási sorrendje" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Ez a G-kód minden rétegváltáshoz bekerül a Z tengely emelése előtt." msgid "Bottom shell layers" @@ -9593,7 +11117,7 @@ msgstr "Alsó héj rétegek" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Ez az alsó héj szilárd rétegeinek száma, beleértve az alsó felületi réteget " "is. Ha az ezzel az értékkel számított vastagság kisebb, mint az alsó héj " @@ -9606,8 +11130,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Az alsó szilárd rétegek száma szeleteléskor megnő, ha az alsó héjrétegek " "vastagsága kisebb ennél az értéknél. Ezzel elkerülhető, hogy túl vékony " @@ -9619,14 +11143,31 @@ msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -9638,73 +11179,107 @@ msgstr "" msgid "Nowhere" msgstr "" -msgid "Force cooling for overhang and bridge" -msgstr "Hűtés kényszerítése túlnyúlásoknál és áthidalásoknál" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Engedélyezd ezt az opciót a tárgyhűtő ventilátor fordulatszámának " -"optimalizálásához a jobb hűtés érdekében túlnyúlásoknál és áthidalásoknál" -msgid "Fan speed for overhang" -msgstr "Ventilátor fordulatszám túlnyúlásnál" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"A nagy túlnyúlású áthidalások vagy túlnyúló falak nyomtatásakor a tárgyhűtő " -"ventilátor kényszerítve lesz, hogy ezt a fordulatszámot használja. A " -"túlnyúlások és áthidalások hűtésének kikényszerítésével jobb minőség érhető " -"el ezeken a részeken." -msgid "Cooling overhang threshold" -msgstr "Túlnyúlás hűtésének küszöbértéke" +msgid "Overhang cooling activation threshold" +msgstr "" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" -msgstr "" -"Kényszeríti a hűtőventilátort, hogy egy adott fordulatszámot használjon, ha " -"a túlnyúlás mértéke meghaladja ezt az értéket. Százalékban van kifejezve, " -"ami azt jelzi, hogy a nyomtatott vonal hány százaléka maradhat az alsóbb " -"rétegek alátámasztása nélkül. A 0%%-os érték bekapcsolja a hűtést a külső " -"fal teljes szélességén, függetlenül a túlnyúlás mértékétől." - -msgid "Bridge infill direction" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" +msgid "External bridge infill direction" +msgstr "" + +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Az áthidalás szögének felülbírálása. A 0 érték azt jelenti, hogy az " "áthidalás szöge automatikusan kerül kiszámításra. Máskülönben a megadott " "érték kerül alkalmazásra. Ha az áthidalást a falakkal párhuzamosra szeretnéd " "állítani, használj 180°-os értéket." -msgid "Bridge density" +msgid "Internal bridge infill direction" msgstr "" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" msgid "Bridge flow ratio" msgstr "Áthidalás áramlási sebessége" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Csökkentsd kicsit ezt az értéket (például 0,9-re), hogy ezzel csökkentsd az " -"áthidaláshoz használt anyag mennyiségét, és a megereszkedést" msgid "Internal bridge flow ratio" msgstr "" @@ -9712,7 +11287,11 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9720,15 +11299,117 @@ msgstr "Felső felület anyagáramlása" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Ez a beállítás a felső szilárd kitöltésnél használt anyag mennyiségét " -"befolyásolja. Kis mértékben csökkentve simább felület érhető el vele." msgid "Bottom surface flow ratio" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" @@ -9736,17 +11417,16 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "Csak egy fal a felső felületeken" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Csak egy falat használ a sík felső felületeken, hogy több hely maradjon a " "felső kitöltési mintának" @@ -9767,11 +11447,11 @@ msgid "" msgstr "" msgid "Only one wall on first layer" -msgstr "Only one wall on first layer" +msgstr "" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" msgid "Extra perimeters on overhangs" @@ -9779,10 +11459,10 @@ msgstr "" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "" msgid "Overhang reversal" @@ -9790,7 +11470,7 @@ msgstr "" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9801,7 +11481,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9810,9 +11490,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9821,9 +11501,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9842,19 +11522,15 @@ msgstr "" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" msgid "Slow down for overhang" msgstr "Lassítás túlnyúlásoknál" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Engedélyezd ezt az opciót a nyomtatási sebesség lassításához különböző " "túlnyúlási szögeknél" @@ -9862,35 +11538,51 @@ msgstr "" msgid "Slow down for curled perimeters" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" msgid "mm/s or %" msgstr "mm/s vagy %" -msgid "External" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" -msgid "Speed of bridge and completely overhang wall" -msgstr "Az áthidalások és a teljesen túlnyúló falak nyomtatási sebessége" - -msgid "mm/s" -msgstr "mm/s" - msgid "Internal" msgstr "" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" msgid "Brim width" msgstr "Perem szélessége" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "A modell és a legkülső peremvonal közötti távolság" msgid "Brim type" @@ -9898,23 +11590,21 @@ msgstr "Perem típusa" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." -msgstr "" -"This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgstr "" msgid "Brim-object gap" msgstr "Perem-tárgy közötti rés" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "A legbelső peremvonal és a tárgy közötti rés, ami megkönnyítheti a perem " "eltávolítását" msgid "Brim ears" -msgstr "" +msgstr "Karimás fülek" msgid "Only draw brim over the sharp edges of the model." msgstr "" @@ -9923,8 +11613,8 @@ msgid "Brim ear max angle" msgstr "" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" @@ -9932,27 +11622,42 @@ msgid "Brim ear detection radius" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -msgid "Compatible machine" -msgstr "Kompatibilis gép" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "felfelé kompatibilis gép" -msgid "Compatible machine condition" -msgstr "Kompatibilis gépállapot" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Kompatibilis folyamatprofilok" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Logikai kifejezés, amely egy aktív nyomtatóprofil konfigurációs értékeit " +"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " +"nyomtatóprofillal." -msgid "Compatible process profiles condition" -msgstr "Kompatibilis folyamatprofil állapot" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Logikai kifejezés, amely egy aktív nyomtatási profil konfigurációs értékeit " +"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " +"nyomtatási profillal." + +msgid "Print sequence, layer by layer or object by object." msgstr "Nyomtatási sorrend, rétegenként vagy tárgyanként" msgid "By layer" @@ -9964,7 +11669,7 @@ msgstr "Tárgyanként" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -9977,7 +11682,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Engedélyezd ezt az opciót a nyomtatási sebesség lassításához, hogy a " "rétegidő ne lehessen kevesebb, mint a \"Max. ventilátor fordulatszám\"-nál " @@ -9990,28 +11695,25 @@ msgstr "Normál nyomtatás" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Ez az alapértelmezett gyorsulás mind a normál nyomtatáshoz, mind az első " "réteg utáni mozgáshoz." -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Alapértelmezett filament profil" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Alapértelmezett filament profil, ha erre a gép profilra váltasz" msgid "Default process profile" msgstr "Alapértelmezett folyamat profil" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Alapértelmezett folyamat profil, ha erre a gép profilra váltasz" msgid "Activate air filtration" -msgstr "Activate air filtration" +msgstr "" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" @@ -10020,21 +11722,21 @@ msgid "Fan speed" msgstr "Ventilátor fordulatszám" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Az elszívó ventilátor sebessége nyomtatás közben: ez a sebesség felülírja a " "sebességet a filament egyéni G-kódjában." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "" msgid "No cooling for the first" msgstr "Nincs hűtés az első" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Kikapcsolja a hűtést a megadott első pár rétegnél. A hűtés kikapcsolása " "segítheti a jobb tárgyasztalhoz való tapadást" @@ -10043,14 +11745,14 @@ msgid "Don't support bridges" msgstr "Ne támassza alá az áthidalásokat" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Nem támasztja alá az áthidalásokat, ezáltal támaszanyagot spórolva. Az " "áthidalások általában támasz nélkül is jól nyomtathatók, ha nem túl hosszúak" -msgid "Thick bridges" -msgstr "Vastag áthidalások" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10071,41 +11773,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "Letiltva" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -10128,20 +11871,20 @@ msgstr "" msgid "End G-code" msgstr "Befejező G-kód" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Befejező G-kód az egész nyomtatás befejezésekor" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Objektumok közötti G-kód" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "A tárgyak nyomtatása között használt G-kód. Ez a paraméter csak akkor " "működik, ha a nyomtatás tárgyankénti sorrendben történik." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Befejező G-kód a filament nyomtatásának befejezésekor" msgid "Ensure vertical shell thickness" @@ -10167,24 +11910,24 @@ msgstr "" msgid "Top surface pattern" msgstr "Felső felület mintázata" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Ez a felső felület kitöltésének mintája." -msgid "Concentric" -msgstr "Koncentrikus" - -msgid "Rectilinear" -msgstr "Vonalak" - msgid "Monotonic" msgstr "Monotonikus" msgid "Monotonic line" msgstr "Monotonikus vonal" +msgid "Rectilinear" +msgstr "Vonalak" + msgid "Aligned Rectilinear" msgstr "Igazított vonal" +msgid "Concentric" +msgstr "Koncentrikus" + msgid "Hilbert Curve" msgstr "Hilbert-görbe" @@ -10197,7 +11940,7 @@ msgstr "Nyolcágú spirál" msgid "Bottom surface pattern" msgstr "Alsó felület mintázata" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "Ez az alsó felület kitöltésének mintája, kivéve az áthidalásokat." msgid "Internal solid infill pattern" @@ -10234,7 +11977,7 @@ msgid "Small perimeters threshold" msgstr "" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "A kis peremek hosszának küszöbértékét határozza meg. Az alapértelmezett " "érték 0 mm" @@ -10243,10 +11986,10 @@ msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10256,15 +11999,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -10284,7 +12025,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10298,10 +12039,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -10387,10 +12128,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Extruder szín" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Csak vizuális segédként használatos a felhasználói felületen" msgid "Extruder offset" @@ -10400,11 +12144,11 @@ msgid "Flow ratio" msgstr "Anyagáramlás" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Az anyag térfogata megváltozhat az olvadt és a kristályos állapot közötti " "átmenet során. Ez a beállítás arányosan megváltoztatja az anyagáramlást a G-" @@ -10412,15 +12156,106 @@ msgstr "" "értéknek a változtatásával szép sík felületet kaphatsz, ha úgy tapasztalod, " "hogy túl sok vagy kevés az anyagáramlás." +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" + msgid "Enable pressure advance" msgstr "Nyomáselőtolás engedélyezése" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" msgid "" @@ -10432,8 +12267,9 @@ msgid "Keep fan always on" msgstr "Ventilátor mindig bekapcsolva" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Ezen beállítás engedélyezése esetén a tárgyhűtő ventilátor soha nem áll le, " "és legalább a minimális fordulatszámon fog járni, hogy csökkentse az indítás " @@ -10446,13 +12282,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -10461,7 +12295,7 @@ msgstr "Rétegidő" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "A tárgyhűtő ventilátor azon rétegek esetében lesz engedélyezve, amelyek " "becsült ideje rövidebb ennél az értéknél. A ventilátor fordulatszáma a " @@ -10471,14 +12305,16 @@ msgstr "" msgid "Default color" msgstr "Alapértelmezett szín" -msgid "Default filament color" -msgstr "Alapértelmezett filament szín" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" -msgstr "Filament notes" +msgstr "" msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." +msgstr "" msgid "Required nozzle HRC" msgstr "Szükséges fúvóka HRC-érték" @@ -10490,38 +12326,92 @@ msgstr "" "A filament nyomtatásához szükséges fúvóka minimum HRC értéke. A 0 azt " "jelenti, hogy nem ellenőrzi a fúvóka HRC értékét." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Ezzel a beállítással adhatod meg a másodpercenként megolvasztható és " "extrudálható maximális filamentmennyiséget. A nyomtatási sebességet a " "maximális térfogatsebesség korlátozhatja, túl magas és ésszerűtlen sebesség " "esetén. Ez az érték nem lehet 0." -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Filament betöltési idő" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Az új filament betöltésének ideje filament váltáskor, csak statisztikai " -"célokra van használva." msgid "Filament unload time" msgstr "Filament kitöltési idő" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" -"A régi filament kitöltésének ideje filament váltáskor, csak statisztikai " -"célokra van használva." msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "A filament átmérő a G-kódban az extrudálás kiszámításához szükséges, ezért " "fontos, hogy pontos legyen" @@ -10530,7 +12420,7 @@ msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10539,18 +12429,46 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Betöltési sebesség" @@ -10567,7 +12485,7 @@ msgid "Unloading speed" msgstr "Kiürítési sebesség" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "A filament törlőtoronynál való kiürítéséhez használt sebesség (nem " @@ -10584,8 +12502,8 @@ msgid "Delay after unloading" msgstr "Várakozás a kiürítés után" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "A várakozási idő az filament kiürítése után. Segíthet megbízható " @@ -10602,6 +12520,21 @@ msgstr "" "A filament hűtése úgy történik, hogy oda-vissza mozgatják a hűtőcsőben. Adja " "meg a kívánt lépések számát." +msgid "Stamping loading speed" +msgstr "" + +msgid "Speed used for stamping." +msgstr "" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" + msgid "Speed of the first cooling move" msgstr "Az első hűtési lépés sebessége" @@ -10625,15 +12558,6 @@ msgstr "Az utolsó hűtési lépés sebessége" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "A hűtési lépések fokozatosan felgyorsulnak erre a sebességre." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) új filamentet tölt be a szerszámcsere során (a T kód végrehajtásakor). " -"Ezt az időt a G-kód időbecslő hozzáadja a teljes nyomtatási időhöz." - msgid "Ramming parameters" msgstr "Tömörítési paraméterek" @@ -10644,84 +12568,82 @@ msgstr "" "Ez a karakterlánc a TömörítésPárbeszéd ablakban szerkeszthető, és a " "tömörítéssel kapcsolatos paramétereket tartalmaz." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) az előző Filamenet kiüríti a szerszámcsere során (a T kód " -"végrehajtásakor). Ezt az időt a G-kód időbecslő hozzáadja a teljes " -"nyomtatási időhöz." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" msgid "Density" msgstr "Sűrűség" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Filament sűrűsége. Csak statisztikákhoz kerül felhasználásra" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Filament anyagának típusa" msgid "Soluble material" msgstr "Oldható anyag" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Az oldható anyagot általában a támaszok és érintkező felületek nyomtatására " "használják" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Támaszanyag" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "A támaszanyag a támaszok és a támasz érintkező felületeinek nyomtatásához " "van használva." +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Lágyulási hőmérséklet" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" -"The material softens at this temperature, so when the bed temperature is " "equal to or greater than this, it's highly recommended to open the front " -"door and/or remove the upper glass to avoid clogs." +"door and/or remove the upper glass to avoid clogging." +msgstr "" msgid "Price" msgstr "Költség" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Filament költsége. Csak statisztikákhoz kerül felhasználásra" msgid "money/kg" @@ -10730,7 +12652,7 @@ msgstr "pénz/kg" msgid "Vendor" msgstr "Gyártó" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Filamentgyártó." msgid "(Undefined)" @@ -10741,7 +12663,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "A ritkás kitöltési minta szöge, amely a vonal kezdő- vagy fő irányát " "szabályozza" @@ -10751,13 +12673,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10766,38 +12682,67 @@ msgstr "Kitöltés sűrűsége" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "Kitöltési mintázat" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Ez a belső ritkás kitöltés mintája." -msgid "Grid" -msgstr "Rács" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Vonal" -msgid "Cubic" -msgstr "Kockás" +msgid "Grid" +msgstr "Rács" msgid "Tri-hexagon" msgstr "Háromszögletű" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Méhsejt" +msgid "Cubic" +msgstr "Kockás" msgid "Adaptive Cubic" msgstr "Adaptív kocka" -msgid "3D Honeycomb" -msgstr "3D-méhsejt" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "Támasz kocka" @@ -10805,9 +12750,53 @@ msgstr "Támasz kocka" msgid "Lightning" msgstr "Világítás" +msgid "Honeycomb" +msgstr "Méhsejt" + +msgid "3D Honeycomb" +msgstr "3D-méhsejt" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "Cross Hatch" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroid" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "" @@ -10819,16 +12808,16 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" msgid "0 (no open anchors)" -msgstr "0 (no open anchors)" +msgstr "" msgid "1000 (unlimited)" -msgstr "1000 (unlimited)" +msgstr "" msgid "Maximum length of the infill anchor" msgstr "A kitöltőhorgony maximális hossza" @@ -10841,7 +12830,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10849,23 +12838,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "A felső felületi kitöltés gyorsulása. Alacsonyabb érték használata " "javíthatja a felső felület minőségét" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Gyorsulás a külső falnál: alacsonyabb érték használata javíthatja a " "minőséget." @@ -10876,7 +12865,7 @@ msgid "" msgstr "" msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² vagy %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." @@ -10893,7 +12882,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "A kezdőréteg gyorsulása. Alacsonyabb érték használata javíthatja a " "tárgyasztalhoz való tapadást" @@ -10901,7 +12890,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "accel_to_decel engedélyezése" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" "A Klipper max_accel_to_decel értékét a rendszer automatikusan beállítja" @@ -10910,25 +12899,36 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk a külső falaknál" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk a belső falaknál" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "" msgid "" @@ -10941,24 +12941,24 @@ msgstr "Kezdő rétegmagasság" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Kezdőréteg magassága. A vastagabb kezdőréteg javíthatja a tárgy asztalhoz " "való tapadását" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "A kezdőréteg nyomtatási sebessége a szilárd kitöltési rész kivételével" msgid "Initial layer infill" msgstr "Kezdőréteg kitöltése" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "A kezdőréteg szilárd kitöltési részének sebessége" msgid "Initial layer travel speed" msgstr "" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "" msgid "Number of slow layers" @@ -10972,7 +12972,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Az első réteg fúvóka hőmérséklete" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "A fúvóka hőmérséklete az első réteg nyomtatásakor ezzel a filamenttel" msgid "Full fan speed at layer" @@ -10993,24 +12993,48 @@ msgid "Support interface fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "A nyomtató véletlenszerűen vibrál a fal nyomtatása közben, így a felület " "durva megjelenésű lesz" msgid "Contour" -msgstr "Contour" +msgstr "" msgid "Contour and hole" -msgstr "Contour and hole" +msgstr "" msgid "All walls" msgstr "Összes fal" @@ -11019,8 +13043,8 @@ msgid "Fuzzy skin thickness" msgstr "Fuzzy skin vastagsága" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "A rezgés szélessége: ezt ajánlott kisebbre állítani, mint a külső fal " "szélessége." @@ -11029,15 +13053,104 @@ msgid "Fuzzy skin point distance" msgstr "Fuzzy skin pontok távolsága" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Az egyes vonalszakaszokon használt véletlen pontok közötti átlagos távolság" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "Klasszikus" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" @@ -11046,36 +13159,36 @@ msgstr "Apró rések szűrése" msgid "Layers and Perimeters" msgstr "Rétegek és peremek" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "A hézagkitöltés nyomtatási sebessége. A rés általában szabálytalan " "vonalszélességű, és lassabban kell nyomtatni" msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." msgid "Arc fitting" msgstr "Íves illesztés" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11085,7 +13198,8 @@ msgstr "" msgid "Add line number" msgstr "Vonalszám hozzáadása" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Ha engedélyezed ezt a beállítást, minden G-kód sor elejére sorszám (Nx) " "kerül." @@ -11095,7 +13209,7 @@ msgstr "Az első réteg szkennelése" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Engedélyezd ezt az opciót, hogy a nyomtató kamerája ellenőrizze az első " "réteg minőségét" @@ -11105,7 +13219,7 @@ msgstr "Fúvóka típus" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "A fúvóka anyaga: Ez határozza meg a fúvóka kopásállóságát és azt, hogy " "milyen filamentekkel képes nyomtatni." @@ -11119,6 +13233,9 @@ msgstr "Edzett acél" msgid "Stainless steel" msgstr "Rozsdamentes acél" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Sárgaréz" @@ -11138,7 +13255,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Nyomtató szerkezete" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "A nyomtató fizikai felépítése és alkatrészei" msgid "CoreXY" @@ -11171,10 +13288,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" @@ -11198,7 +13315,7 @@ msgstr "" msgid "Time cost" msgstr "" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "" msgid "money/h" @@ -11223,7 +13340,7 @@ msgstr "" msgid "G-code flavor" msgstr "G-kód változat" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "Milyen G-kóddal kompatibilis a nyomtató." msgid "Klipper" @@ -11232,20 +13349,20 @@ msgstr "" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "Objektumok címkézése" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11254,7 +13371,7 @@ msgstr "" msgid "Exclude objects" msgstr "Tárgyak kizárása" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" msgid "Verbose G-code" @@ -11281,6 +13398,128 @@ msgstr "" "csökkentése érdekében. A fal továbbra is az eredeti rétegmagassággal kerül " "kinyomtatásra." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "Filament a belső ritkás kitöltésekhez." @@ -11307,25 +13546,28 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "A belső ritkás kitöltés sebessége" +msgid "Inherits profile" +msgstr "Örököli a profilt" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" -msgstr "Interface shells" +msgstr "" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" msgid "Maximum width of a segmented region" msgstr "Szegmentált régió maximális szélessége" @@ -11337,10 +13579,12 @@ msgstr "" msgid "Interlocking depth of a segmented region" msgstr "Szegmentált régió összekapcsolódási mélysége" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Szegmentált régió összekapcsolódási mélysége. A 0 érték letiltja ezt a " -"funkciót." msgid "Use beam interlocking" msgstr "" @@ -11410,9 +13654,9 @@ msgid "All solid layer" msgstr "Összes szilárd réteg" msgid "Ironing Pattern" -msgstr "Ironing Pattern" +msgstr "" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "" msgid "Ironing flow" @@ -11420,7 +13664,7 @@ msgstr "Vasalás áramlási sebesség" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "A vasalás során extrudálandó anyag mennyisége a normál anyagáramláshoz " "viszonyítva. A túl magas érték a felületen túlextrudálást eredményez." @@ -11428,34 +13672,49 @@ msgstr "" msgid "Ironing line spacing" msgstr "Vasalási vonalak közötti távolság" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "A vasaláshoz használt vonalak közötti távolság." +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "Vasalás sebessége" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "A vasalási vonalak nyomtatási sebessége" -msgid "Ironing angle" +msgid "Ironing angle offset" msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "The angle of ironing lines offset from the top surface." msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "Ez a G-kód minden rétegváltásnál beillesztésre kerül a Z tengely megemelése " "után." +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Csendes mód" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Csendes üzemmód támogatása, amelyben a gép kisebb gyorsulást használ a " "csendesebb nyomtatáshoz" @@ -11468,23 +13727,23 @@ msgstr "Géplimitek" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Ez a G-kód lesz használva a nyomtatás szüneteltetéséhez. A felhasználók a " "szünet G-kódot a G-kódnézőben illeszthetik be." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Ezt a G-kód egyedi kódként lesz használva." msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -11493,8 +13752,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -11569,6 +13828,15 @@ msgstr "Maximális jerk a Z tengelyen" msgid "Maximum jerk of the E axis" msgstr "Maximális jerk az E tengelyen" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Extrudálás minimális sebessége" @@ -11596,26 +13864,41 @@ msgstr "Maximális gyorsulás a visszahúzáshoz (M204 R)" msgid "Maximum acceleration for travel" msgstr "Maximális gyorsulás a mozgáshoz" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" + +msgid "Resonance avoidance" msgstr "" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"A tárgyhűtő ventilátor fordulatszáma növelhető, ha az automatikus hűtés " -"engedélyezve van. Ez a tárgyhűtő ventilátor maximális fordulatszám-határa" msgid "Max" msgstr "Max" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"A tárgyhűtő ventilátor fordulatszáma növelhető, ha az automatikus hűtés " +"engedélyezve van. Ez a tárgyhűtő ventilátor maximális fordulatszám-határa" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Az extruder által nyomtatható legnagyobb rétegmagasság: ez a maximális " -"rétegmagasság korlátozására szolgál, ha az adaptív rétegmagasság " -"engedélyezve van." msgid "Extrusion rate smoothing" msgstr "" @@ -11626,47 +13909,54 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "Tárgyhűtő ventilátor minimum fordulatszáma" msgid "" @@ -11677,30 +13967,21 @@ msgid "" "command: M106 P2 S(0-255)" msgstr "" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Az extruder által nyomtatható legkisebb rétegmagasság: ez a minimum " -"rétegmagasság korlátozására szolgál, ha az adaptív rétegmagasság " -"engedélyezve van." msgid "Min print speed" msgstr "Min. nyomtatási sebesség" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Nozzle diameter" -msgstr "Fúvóka átmérője" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Fúvóka átmérője" msgid "Configuration notes" @@ -11726,7 +14007,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Fúvóka térfogata" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "A fúvóka térfogata a filamentvágó és a fúvóka vége között" msgid "Cooling tube position" @@ -11771,7 +14052,7 @@ msgstr "Extra betöltési hossz" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Ha nullára van állítva, akkor a filamentet a betöltés során a " @@ -11791,7 +14072,7 @@ msgstr "Csökkentett visszahúzás kitöltésnél" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Nem történik visszahúzás, amikor a fej csak kitöltés felett halad el, mert " "az itt történő szivárgás egyébként sem látható.\n" @@ -11799,10 +14080,15 @@ msgstr "" "komplex modelleknél, de egyúttal lassabbá teszi a szeletelést és a G-kód " "generálást" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" + msgid "Filename format" msgstr "Fájlnév formátum" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "A felhasználó dönthet a projektfájlok nevéről exportáláskor." msgid "Make overhangs printable" @@ -11825,12 +14111,9 @@ msgstr "" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Túlnyúló fal felismerése" @@ -11843,15 +14126,18 @@ msgstr "" "más sebességet használ. A 100%%-os túlnyúlás esetén az áthidaláshoz " "beállított sebességet használja." +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "A belső fal nyomtatási sebessége" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Ez a falak száma rétegenként." msgid "Alternate extra wall" @@ -11859,10 +14145,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11876,16 +14162,25 @@ msgid "" "environment variables." msgstr "" +msgid "Printer type" +msgstr "Nyomtató típusa" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" -msgstr "Printer notes" +msgstr "" msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." +msgstr "" + +msgid "Printer variant" +msgstr "Nyomtató változat" msgid "Raft contact Z distance" msgstr "Tutaj érintkezés Z távolság" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "This is the Z gap between an object and a raft. It is ignored for soluble " "interfaces." @@ -11893,19 +14188,19 @@ msgstr "" msgid "Raft expansion" msgstr "Tutaj kibővítése" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Összes tutaj réteg kiterjesztése az XY síkban" msgid "Initial layer density" msgstr "Első réteg sűrűsége" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Az első tutaj vagy támasz réteg sűrűsége" msgid "Initial layer expansion" msgstr "First layer expansion" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "This expands the first raft or support layer to improve bed adhesion." msgid "Raft layers" @@ -11913,15 +14208,15 @@ msgstr "Tutaj rétegek" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "A tárgy ennyi támaszréteggel kerül megemelésre. Ezzel a funkcióval " "elkerülheted a vetemedést ABS nyomtatásakor." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "A G-kód útvonal a modell kontúrjának egyszerűsítése után jön létre, hogy " "elkerüljük a túl sok sort a G-kód fájlban. A kisebb érték nagyobb felbontást " @@ -11932,7 +14227,7 @@ msgstr "Mozgás távolságának küszöbértéke" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Csak akkor indít visszahúzást, ha a mozgási távolság nagyobb, mint ez az " "érték." @@ -11941,7 +14236,7 @@ msgid "Retract amount before wipe" msgstr "Visszahúzott mennyiség törlés előtt" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "Ez a törlés előtti gyors visszahúzás hossza a visszahúzási hosszhoz " "viszonyítva." @@ -11949,7 +14244,7 @@ msgstr "" msgid "Retract when change layer" msgstr "Visszahúzás rétegváltáskor" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Kényszeríti a visszahúzást minden rétegváltáskor" msgid "Retraction Length" @@ -11957,70 +14252,70 @@ msgstr "Visszahúzás hossza" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Az extruderben lévő anyag egy része visszahúzásra kerül, ezáltal elkerülve a " -"hosszabb mozgás során történő szivárgást. A visszahúzás kikapcsolásához " -"állítsd nullára" -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" -msgid "Z hop when retract" -msgstr "Z-tengely emelés visszahúzáskor" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Visszahúzáskor a fúvóka egy kicsit megemelkedik, hogy a fúvóka és a " "nyomtatott tárgy között rés keletkezzen. Ez megakadályozza, hogy a fúvóka " "nagyobb mozgás közben a tárgynak ütközzön. A Z tengely emelésekor használt " "körkörös mozgás megelőzheti a szálazást." -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Z-emelés alsó határa" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "A Z-tengely emelése csak akkor történik meg, ha az emelés mértéke nagyobb " "ennél az értéknél, de kisebb a „Z-emelés felső határánál“" -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Z-emelés felső határa" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Ha ez az érték pozitív, a Z-emelés csak akkor történik meg, ha az emelés " "mértéke a „Z-emelés alsó határánál“ nagyobb, de kisebb ennél az értéknél" -msgid "Z hop type" +msgid "Z-hop type" +msgstr "" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" @@ -12033,8 +14328,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -12057,7 +14352,7 @@ msgid "On surfaces" msgstr "" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" @@ -12073,6 +14368,18 @@ msgstr "" msgid "Top and Bottom" msgstr "" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Extra hossz újraindításkor" @@ -12094,18 +14401,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Visszahúzás sebessége" -msgid "Speed of retractions" -msgstr "Visszahúzások sebessége" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Betöltési sebesség" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"A filament extruderbe történő visszatöltésének sebessége. A nulla azonos " -"sebességet jelent a visszahúzással" msgid "Use firmware retraction" msgstr "Firmware-ben megadott visszahúzás használata" @@ -12122,13 +14427,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "Varrat pozíció" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "A külső fal nyomtatásának kiindulási helyzete." msgid "Nearest" @@ -12137,6 +14442,9 @@ msgstr "Legközelebbi" msgid "Aligned" msgstr "Igazított" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Hátul" @@ -12166,20 +14474,17 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use scarf joint to minimize seam visibility and increase seam strength." msgid "Conditional scarf joint" -msgstr "Conditional scarf joint" +msgstr "" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Apply scarf joints only to smooth perimeters where traditional seams do not " -"conceal the seams at sharp corners effectively." msgid "Conditional angle threshold" -msgstr "Conditional angle threshold" +msgstr "" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12206,13 +14511,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -12222,52 +14527,48 @@ msgid "This factor affects the amount of material for scarf joints." msgstr "" msgid "Scarf start height" -msgstr "Scarf start height" +msgstr "" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." msgid "Scarf around entire wall" -msgstr "Scarf around entire wall" +msgstr "" msgid "The scarf extends to the entire length of the wall." -msgstr "The scarf extends to the entire length of the wall." +msgstr "" msgid "Scarf length" -msgstr "Scarf length" +msgstr "" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." msgid "Scarf steps" -msgstr "Scarf steps" +msgstr "" msgid "Minimum number of segments of each scarf." -msgstr "Minimum number of segments of each scarf." +msgstr "" msgid "Scarf joint for inner walls" -msgstr "Scarf joint for inner walls" +msgstr "" msgid "Use scarf joint for inner walls as well." -msgstr "Use scarf joint for inner walls as well." +msgstr "" msgid "Role base wipe speed" msgstr "" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" msgid "Wipe on loops" @@ -12282,15 +14583,15 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" @@ -12298,9 +14599,9 @@ msgstr "Törlés sebessége" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "A törlés sebességét az itt megadott beállítás határozza meg. Ha az érték " "százalékban van megadva (pl. 80%), akkor azt a rendszer a mozgási " @@ -12310,14 +14611,31 @@ msgstr "" msgid "Skirt distance" msgstr "Szoknya távolsága" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "A szoknyától a peremig vagy tárgyig mért távolság" -msgid "Skirt height" -msgstr "Skirt height" +msgid "Skirt start point" +msgstr "" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Number of skirt layers: usually only one" +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" + +msgid "Skirt height" +msgstr "" + +msgid "How many layers of skirt. Usually only one layer." +msgstr "" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "Huzatvédő" @@ -12325,27 +14643,33 @@ msgstr "Huzatvédő" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" -msgstr "Korlátozott" - msgid "Enabled" msgstr "Engedélyezve" +msgid "Skirt type" +msgstr "" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" + +msgid "Per object" +msgstr "" + msgid "Skirt loops" msgstr "Szoknya hurkok száma" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "" "A szoknya hurkainak száma. A nulla a szoknya kikapcsolását jelenti.\n" "\n" @@ -12367,13 +14691,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "A nyomtatási sebesség az exportált G-kódban csökkentésre kerül, ha a becsült " "rétegidő kisebb, mint ez az érték, hogy a rétegek jobb hűtése biztosított " @@ -12384,49 +14711,73 @@ msgstr "Ritkás kitöltés küszöbértéke" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "A küszöbérték alatti ritkás kitöltési terület belső szilárd kitöltéssel " "kerül leváltásra" +msgid "Solid infill" +msgstr "Tömör kitöltés" + +msgid "Filament to print solid infill." +msgstr "" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "A belső szilárd kitöltés sebessége, de az az érték nem vonatkozik a felső és " "alsó felületre" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "A spirál mód kisimítja a külső kontúr Z mozgásait. A tömör modellt egyfalú " "nyomatokká alakítja, tömör alsó rétegekkel. A végső modellen nincsenek " "varratok" msgid "Smooth Spiral" -msgstr "Smooth Spiral" +msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" msgid "Max XY Smoothing" -msgstr "Max XY Smoothing" - -msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" msgstr "" + +#, no-c-format, no-boost-format +msgid "" "Maximum distance to move points in XY to try to achieve a smooth spiral. If " -"expressed as a %, it will be computed over nozzle diameter" +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12453,19 +14804,44 @@ msgstr "Hagyományos" msgid "Temperature variation" msgstr "Hőmérséklet változás" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "Kezdő G-kód" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Kezdő G-kód az egész nyomtatás megkezdésekor" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Kezdő G-kód a filament nyomtatásának megkezdésekor" msgid "Single Extruder Multi Material" msgstr "Egyetlen Extruder Többféle Anyag" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" msgid "Manual Filament Change" @@ -12482,7 +14858,7 @@ msgstr "" msgid "Purge in prime tower" msgstr "" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "" msgid "Enable filament ramming" @@ -12492,8 +14868,8 @@ msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12565,33 +14941,40 @@ msgstr "Támasz engedélyezése" msgid "Enable support generation." msgstr "Engedélyezi a támasz generálását." +#, fuzzy msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" "A normál (auto) és a fa (auto) a támaszok automatikus generálásához van " "használva. Ha a normál (kézi) vagy a fa (kézi) van kiválasztva, akkor csak a " "kényszerített támaszok kerülnek generálásra." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "normál (auto)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "fa (auto)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "normál (manuális)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "fa (manuális)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Támasz/tárgy XY távolság" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Ez szabályozza a tárgy és a támasz közötti XY elválasztás távolságát." +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "Mintázat szöge" @@ -12602,7 +14985,7 @@ msgstr "" msgid "On build plate only" msgstr "Csak a tárgyasztaltól" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Nem generál támaszt a modell felületén, csak a tárgyasztalon" msgid "Support critical regions only" @@ -12615,18 +14998,16 @@ msgstr "" "Csak olyan kritikus területekhez generál támasztékot, mint például egy farok " "vagy egyéb kiálló részek." -msgid "Remove small overhangs" -msgstr "Kis túlnyúlások eltávolítása" - -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs" +msgstr "" + +msgid "Ignore small overhangs that possibly don't require support." msgstr "" -"Eltávolítja a kis túlnyúlásokat, amelyek esetleg nem igényelnek " -"alátámasztást." msgid "Top Z distance" msgstr "Z távolság" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" "Meghatározza a Z távolságot a felső támasz érintkező rétege és az objektum " "között." @@ -12634,15 +15015,15 @@ msgstr "" msgid "Bottom Z distance" msgstr "Alsó Z távolság" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "A Z távolság az alsó támasz érintkező rétege és az objektum között." msgid "Support/raft base" -msgstr "Support/raft base" +msgstr "" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "A támasz alapjához és a tutaj nyomtatásához használt filament. Az " "„Alapértelmezett“ beállítás választásakor a jelenleg használt filament kerül " @@ -12672,11 +15053,11 @@ msgstr "" "letiltva." msgid "Support/raft interface" -msgstr "Support/raft interface" +msgstr "" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament a támasz érintkező felületének nyomtatásához. Az „Alapértelmezett“ " "beállítás választásakor a jelenleg használt filament kerül felhasználásra." @@ -12684,13 +15065,13 @@ msgstr "" msgid "Top interface layers" msgstr "Felső érintkező rétegek" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "A felső érintkező rétegek száma." msgid "Bottom interface layers" msgstr "Alsó érintkező rétegek" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Alsó érintkezőrétegek száma" msgid "Same as top" @@ -12699,24 +15080,25 @@ msgstr "Ugyanaz, mint a felső" msgid "Top interface spacing" msgstr "Felső érintkező felület térköze" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Az érintkező réteg vonalai közötti távolság. A nulla szilárd kitöltést jelent" msgid "Bottom interface spacing" msgstr "Alső érintkező réteg térköz" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Az érintkező réteg vonalai közötti távolság. A nulla szilárd kitöltést jelent" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Támasz érintkező felületek sebessége" msgid "Base pattern" msgstr "Alap mintázata" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "A támasz mintázata." msgid "Rectilinear grid" @@ -12731,28 +15113,28 @@ msgstr "Érintkező felület mintázata" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "A támasz érintkezési felületének vonalmintája. A nem oldható támaszfelület " "alapértelmezett mintázata egyenes vonalú, míg az oldható támaszfelület " "alapértelmezett mintázata koncentrikus" msgid "Rectilinear Interlaced" -msgstr "Rectilinear Interlaced" +msgstr "" msgid "Base pattern spacing" msgstr "Alap mintázatának térköze" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "A támasz vonalai közötti távolság" msgid "Normal Support expansion" msgstr "Normál támasz kibővítése" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Megnöveli (+) vagy összehúzza (-) a normál támaszt vízszintes irányban" -msgid "Speed of support" +msgid "Speed of support." msgstr "Támaszok sebessége" msgid "" @@ -12765,9 +15147,15 @@ msgid "" "overhangs." msgstr "" +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" msgstr "Szoros" +msgid "Organic" +msgstr "" + msgid "Tree Slim" msgstr "Karcsú fa" @@ -12777,20 +15165,14 @@ msgstr "Erős fa" msgid "Tree Hybrid" msgstr "Hibrid fa" -msgid "Organic" -msgstr "" - msgid "Independent support layer height" msgstr "Független támasz rétegmagassága" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " -"when the prime tower is enabled." msgid "Threshold angle" msgstr "Dőlésszög küszöbértéke" @@ -12802,12 +15184,21 @@ msgstr "" "Az olyan túlnyúlásoknál, amelynek dőlésszöge ez alatt az érték alatt van, " "támasz fog generálódni." +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "Fa típusú támasz ágainak szöge" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Ez a beállítás határozza meg, hogy a fa típusú támasz ágai milyen maximális " @@ -12845,26 +15236,18 @@ msgid "" "needed." msgstr "" -msgid "Adaptive layer height" -msgstr "Adaptív rétegmagasság" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - msgid "Auto brim width" msgstr "" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" msgid "Tree support brim width" -msgstr "Tree support brim width" +msgstr "" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" msgid "Tip Diameter" @@ -12892,61 +15275,89 @@ msgid "" "support." msgstr "" -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" - msgid "Support wall loops" msgstr "Támaszfalak száma" -msgid "This setting specify the count of walls around support" -msgstr "A támasz körüli falak száma" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" msgid "Tree support with infill" msgstr "Fa támasz kitöltéssel" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Ez a beállítás határozza meg, hogy a fa támasz nagyobb üregeiben legyen-e " "kitöltés." +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" msgid "Chamber temperature" msgstr "Kamra hőmérséklete" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on. At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials, the actual chamber temperature should not " -"be high to avoid clogs, so 0 (turned off) is highly recommended." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Fúvóka hőmérséklete az első réteg után" msgid "Detect thin wall" @@ -12954,19 +15365,19 @@ msgstr "Vékony fal felismerése" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Felismeri a vékony falat, amit nem lehet két vonalnyi szélességgel " "nyomtatni, és egyetlen vonallal nyomtatja" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Ez a G-kód kerül beillesztésre, amikor a filament csere történik, beleértve " "a szerszámváltást indító T parancsokat is." -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" msgid "" @@ -12974,7 +15385,7 @@ msgid "" "the nozzle diameter." msgstr "" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "A felső felületi kitöltés sebessége, amely szilárd" msgid "Top shell layers" @@ -12983,7 +15394,7 @@ msgstr "Felső héj rétegek" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Ez a felső héj szilárd rétegeinek száma, beleértve a felső felület réteget. " "Ha az ezzel az értékkel számított vastagság vékonyabb, mint a felső héj " @@ -12999,8 +15410,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "A felső szilárd rétegek száma szeleteléskor megnő, ha a felső héjrétegekből " "számított vastagság kisebb ennél az értéknél. Ezzel elkerülhető, hogy túl " @@ -13008,15 +15419,36 @@ msgstr "" "beállítás ki van kapcsolva, és a felső héj vastagságát egyszerűen a felső " "héjrétegek száma határozza meg." -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Mozgási sebesség, amikor nem történik extrudálás" msgid "Wipe while retracting" msgstr "Törlés visszahúzás közben" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Ez visszahúzáskor a fúvókát az utolsó extrudálási útvonal mentén mozgatja, " "hogy a fúvókából szivárgott anyagot eltávolítsa. Ez minimálisra csökkentheti " @@ -13027,12 +15459,11 @@ msgid "Wipe Distance" msgstr "Törlési távolság" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -13047,6 +15478,12 @@ msgstr "" "the chamber pressure inside the nozzle in order to avoid appearance defects " "when printing objects." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Tisztítási mennyiségek" @@ -13066,15 +15503,20 @@ msgstr "Tisztítási mennyiség" msgid "The volume of material to prime extruder on tower." msgstr "Ez az az anyagmennyiség, amelyet az extruder a toronyban ürít." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Ez a törlő torony szélessége." msgid "Wipe tower rotation angle" msgstr "Törlőtorony forgatási szöge" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Törlőtorony forgatási szöge az x-tengelyhez képest." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "" @@ -13083,12 +15525,6 @@ msgid "" "Larger angle means wider base." msgstr "" -msgid "Wipe tower purge lines spacing" -msgstr "" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "" - msgid "Maximum wipe tower print speed" msgstr "" @@ -13106,7 +15542,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13114,7 +15550,37 @@ msgid "" "regardless of this setting." msgstr "" -msgid "Wipe tower extruder" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." msgstr "" msgid "" @@ -13131,6 +15597,18 @@ msgid "" "volumes below." msgstr "" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -13153,8 +15631,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Ez az objektum lesz használva a fúvóka tisztítására filamentcsere után, a " "nyomtatási idő csökkentése és némi filament megtakarításának érdekében. Az " @@ -13167,13 +15645,39 @@ msgstr "Maximális áthidalási távolság" msgid "Maximal distance between supports on sparse infill sections." msgstr "A támaszok közötti maximális távolság a ritkás kitöltésű részeken." +msgid "Wipe tower purge lines spacing" +msgstr "" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "" + +msgid "Extra flow for purging" +msgstr "" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" + +msgid "Idle temperature" +msgstr "" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" + msgid "X-Y hole compensation" msgstr "X-Y furatkompenzáció" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "A tárgy furatai az XY síkban a beállított értékkel nőnek vagy zsugorodnak. " "Pozitív érték esetén a furatok nagyobbak lesznek, míg a negatív értéktől " @@ -13184,11 +15688,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "X-Y körvonal kompenzáció" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Az objektum körvonala az XY síkban a beállított értékkel növekszik vagy " "zsugorodik. Pozitív érték esetén a kontúr nagyobb lesz, negatív érték esetén " @@ -13212,7 +15717,7 @@ msgstr "" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13236,31 +15741,28 @@ msgstr "" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" msgid "Use relative E distances" msgstr "Relatív E távolságok használata" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "A klasszikus falgenerátor állandó szélességű falakat generál, és a nagyon " "vékony területeknél hézagkitöltést használ. Az Arachne engine változó " "szélességű falakat generál." -msgid "Classic" -msgstr "Klasszikus" - msgid "Arachne" msgstr "Arachne" @@ -13270,7 +15772,7 @@ msgstr "Falátmenet hossza" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "A különböző vastagságú falak közötti átmenetkor, ahogy a tárgy vékonyabbá " "válik, egy bizonyos terület elkülönítésre kerül a falszegmensek " @@ -13287,7 +15789,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Megakadályozza az oda-vissza átmenetet egy extra és eggyel kevesebb fal " "között. Ez a toleranciaérték megnöveli a soron következő extrudálás " @@ -13305,7 +15807,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Mikor legyen átmenetet a páros és páratlan számú falak között. Az ennél " "nagyobb szögű ék formánál nem lesz átmenet és nem kerül közé anyag, hogy " @@ -13317,7 +15819,7 @@ msgstr "Falak elosztása" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "A falak száma, a középponttól számítva, amelyek között a falakat el kell " "osztani. Az alacsonyabb érték azt jelenti, hogy a külső falak szélessége nem " @@ -13328,13 +15830,10 @@ msgstr "Minimális méret" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"A vékony elemek minimális vastagsága. Az ennél vékonyabb modellelemek nem " -"lesznek kinyomtatva, míg a minimum méretnél nagyobb elemek a minimális " -"falszélességre szélesednek. A fúvóka átmérőjének százalékában van kifejezve" msgid "Minimum wall length" msgstr "" @@ -13344,9 +15843,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" @@ -13366,7 +15865,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "A fal szélessége, amely lecseréli a modell vékony részeit (a Minimális " "méretben megadott érték szerint). Ha a minimális falszélesség vékonyabb, " @@ -13377,9 +15876,9 @@ msgid "Detect narrow internal solid infill" msgstr "Keskeny belső szilárd kitöltés felismerése" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési " "területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében ezen a " @@ -13387,36 +15886,158 @@ msgstr "" "alapértelmezés szerint az egyenes vonalú mintát használja." msgid "invalid value " -msgstr "invalid value " +msgstr "" msgid "Invalid value when spiral vase mode is enabled: " -msgstr "Invalid value when spiral vase mode is enabled: " +msgstr "" msgid "too large line width " -msgstr "too large line width " +msgstr "" msgid " not in range " -msgstr " not in range " +msgstr "" + +msgid "Export 3MF" +msgstr "3MF exportálása" + +msgid "Export project as 3MF." +msgstr "Projekt exportálása 3MF formátumban." + +msgid "Export slicing data" +msgstr "Szeletelési adatok exportálása" + +msgid "Export slicing data to a folder." +msgstr "Szeletelési adatok exportálása egy mappába" + +msgid "Load slicing data" +msgstr "Szeletelési adatok betöltése" + +msgid "Load cached slicing data from directory." +msgstr "Gyorsítótárazott szeletelési adatok betöltése mappából" + +msgid "Export STL" +msgstr "STL exportálása" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "Szeletelés" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Tálcák szeletelése: 0 - összes tálca, i - i tálca, egyéb - érvénytelen" + +msgid "Show command help." +msgstr "Parancs súgó megjelenítése." + +msgid "UpToDate" +msgstr "Naprakész" + +msgid "Update the config values of 3MF to latest." +msgstr "Frissítsd a 3MF konfigurációs értékeit a legújabbra." + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "Alapértelmezett filamentek betöltése" + +msgid "Load first filament as default for those not loaded." +msgstr "" +"Első filament betöltése alapértelmezettként a nem betöltött filamenteknél" msgid "Minimum save" msgstr "" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." +msgstr "" + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "" + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." msgstr "" msgid "No check" -msgstr "No check" +msgstr "" -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "Do not run any validity checks, such as G-code path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" + +msgid "Normative check" +msgstr "" + +msgid "Check the normative items." +msgstr "" + +msgid "Output Model Info" +msgstr "Kimeneti modell információ" + +msgid "Output the model's information." +msgstr "Kimeneti modell információ." + +msgid "Export Settings" +msgstr "Beállítások exportálása" + +msgid "Export settings to a file." +msgstr "Beállítások exportálása egy fájlba." + +msgid "Send progress to pipe" +msgstr "Folyamat elküldése" + +msgid "Send progress to pipe." +msgstr "Folyamat elküldése." + +msgid "Arrange Options" +msgstr "Elrendezési lehetőségek" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Elrendezési lehetőségek: 0-letiltás, 1-engedélyezés, egyéb-auto" + +msgid "Repetition count" +msgstr "Ismétlésszám" + +msgid "Repetition count of the whole model." +msgstr "A teljes modell ismétlésszáma" msgid "Ensure on bed" msgstr "Ágyra igazítás" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"A megadott modellek elredezése és egyetlen modellé való összevonása a " +"tárgyasztalon, hogy egyszerre lehessen végrehajtani a műveleteket." + +msgid "Convert Unit" +msgstr "Mértékegység átváltása" + +msgid "Convert the units of model." +msgstr "Modell mértékegységének átváltása" + msgid "Orient Options" msgstr "" @@ -13426,12 +16047,80 @@ msgstr "" msgid "Rotation angle around the Z axis in degrees." msgstr "Az Z tengely körüli forgatási szög fokban." +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "Forgatás Y körül" msgid "Rotation angle around the Y axis in degrees." msgstr "Az Y tengely körüli forgatási szög fokban." +msgid "Scale the model by a float factor." +msgstr "A modell méretezése egy lebegő tényezővel" + +msgid "Load General Settings" +msgstr "Általános beállítások betöltése" + +msgid "Load process/machine settings from the specified file." +msgstr "Folyamat/gépbeállítások betöltése a megadott fájlból" + +msgid "Load Filament Settings" +msgstr "Filamentbeállítások betöltése" + +msgid "Load filament settings from the specified file list." +msgstr "Filamentbeállítások betöltése a megadott fájllistából" + +msgid "Skip Objects" +msgstr "" + +msgid "Skip some objects in this print." +msgstr "" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "Adatkönyvtár" @@ -13444,34 +16133,126 @@ msgstr "" "különböző profilok karbantartásához vagy a hálózaton tárolt konfigurációk " "beviteléhez." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Kimeneti mappa" + +msgid "Output directory for the exported files." +msgstr "Az exportált fájlok kimeneti mappája." + +msgid "Debug level" +msgstr "Hibakeresés szintje" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" +"info, 4:debug, 5:trace\n" + +msgid "Enable timelapse for print" msgstr "" -msgid "Load custom gcode from json" +msgid "If enabled, this slicing will be considered using timelapse." msgstr "" -msgid "Current z-hop" +msgid "Load custom G-code" msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Load custom G-code from json." +msgstr "" + +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" +msgstr "" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "" + +msgid "Absolute E position" +msgstr "" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" msgid "Current extruder" @@ -13513,7 +16294,14 @@ msgstr "" msgid "Is extruder used?" msgstr "" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "" + +msgid "Has single extruder MM priming" +msgstr "" + +msgid "Are the extra multi-material priming regions used in this print?" msgstr "" msgid "Volume per extruder" @@ -13522,10 +16310,10 @@ msgstr "" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "" msgid "Total volume" @@ -13575,7 +16363,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -13585,11 +16373,11 @@ msgid "Source filename of the first object, without extension." msgstr "" msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" @@ -13634,6 +16422,9 @@ msgstr "" msgid "Minute" msgstr "" +msgid "Second" +msgstr "Másodperc" + msgid "Print preset name" msgstr "" @@ -13660,13 +16451,21 @@ msgstr "" msgid "Name of the physical printer used for slicing." msgstr "" +msgid "Number of extruders" +msgstr "" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" + msgid "Layer number" msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -13674,7 +16473,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -13701,28 +16500,26 @@ msgstr "Kitöltési szerszámút generálás" msgid "Detect overhangs for auto-lift" msgstr "Túlnyúlások észlelése az automatikus emeléshez" -msgid "Generating support" -msgstr "Támaszok generálása" - msgid "Checking support necessity" msgstr "Támasz szükségességének ellenőrzése" msgid "floating regions" -msgstr "floating regions" +msgstr "" msgid "floating cantilever" -msgstr "floating cantilever" +msgstr "" msgid "large overhangs" -msgstr "large overhangs" +msgstr "" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"It seems object %s has %s. Please re-orient the object or enable support " -"generation." + +msgid "Generating support" +msgstr "Támaszok generálása" msgid "Optimizing toolpath" msgstr "Szerszámút optimalizálása" @@ -13734,84 +16531,58 @@ msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"No layers were detected. You might want to repair your STL file(s) or check " -"their size or thickness and retry.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"An object's XY size compensation will not be used because it is also color-" -"painted.\n" -"XY Size compensation can not be combined with color-painting." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Támasz: szerszámút generálása %d. réteg" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Támasz: túlnyúlások észlelése" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Támasz: érintkezési pontok generálása" -msgid "Support: propagate branches" -msgstr "Támasz: ágak kiterjesztése" +msgid "Loading of a model file failed." +msgstr "" -msgid "Support: draw polygons" -msgstr "Támasz: poligonok rajzolása" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Támasz: szerszámút generálása" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Támogatás: poligonok generálása %d. réteg" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Támasz: lyukak javítása %d. réteg" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Támasz: ágak kiterjesztése %d. réteg" +msgid "The supplied file couldn't be read because it's empty" +msgstr "" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unknown file format: input file must have .stl, .obj, or .amf(.xml) " -"extension." - -msgid "Loading of a model file failed." -msgstr "Loading of model file failed." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "The supplied file couldn't be read because it's empty." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "Unknown file format: input file must have .3mf or .zip.amf extension." - -msgid "Canceled" -msgstr "Canceled" +msgstr "" msgid "load_obj: failed to parse" -msgstr "load_obj: failed to parse" +msgstr "" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "" msgid "The file contains polygons with more than 4 vertices." -msgstr "The file contains polygons with more than 4 vertices." +msgstr "" msgid "The file contains polygons with less than 2 vertices." -msgstr "The file contains polygons with less than 2 vertices." +msgstr "" msgid "The file contains invalid vertex index." -msgstr "The file contains invalid vertex index." +msgstr "" msgid "This OBJ file couldn't be read because it's empty." -msgstr "This OBJ file couldn't be read because it's empty." +msgstr "" msgid "Flow Rate Calibration" msgstr "Anyagáramlás kalibrálása" @@ -13884,7 +16655,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Kérjük, érvényes értékeket adj meg:\n" "Kezdő érték: >= %.1f\n" @@ -13896,7 +16667,7 @@ msgid "The name cannot be empty." msgstr "A név nem lehet üres." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "A kiválasztott beállítás: %s nem található." msgid "The name cannot be the same as the system preset name." @@ -13908,11 +16679,17 @@ msgstr "A név megegyezik egy másik meglévő beállítás nevével" msgid "create new preset failed." msgstr "Új beállítás létrehozása sikertelen." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Are you sure you want to cancel the current calibration and return to the " -"home page?" msgid "No Printer Connected!" msgstr "Nincs nyomtató csatlakoztatva!" @@ -13930,23 +16707,15 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" -msgid "Connecting to printer..." -msgstr "Csatlakozás a nyomtatóhoz..." - -msgid "The failed test result has been dropped." -msgstr "A sikertelen teszteredményt eltávolítottuk." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Az áramlásdinamikai kalibráció eredményeit elmentette a nyomtató" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13958,13 +16727,27 @@ msgstr "" "azonos nevű eredményt lehet elmenteni. Biztos, hogy felül akarod írni a " "korábbi eredményeket?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." + +msgid "Connecting to printer..." +msgstr "Csatlakozás a nyomtatóhoz..." + +msgid "The failed test result has been dropped." +msgstr "A sikertelen teszteredményt eltávolítottuk." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Az áramlásdinamikai kalibráció eredményeit elmentette a nyomtató" msgid "Internal Error" msgstr "Belső hiba" @@ -13972,10 +16755,10 @@ msgstr "Belső hiba" msgid "Please select at least one filament for calibration" msgstr "Kérjük, válassz ki legalább egy filamentet a kalibráláshoz." -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "Az anyagáramlás kalibrálásának eredményeit elmentettük a beállításokba" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "A maximális volumetrikus sebesség kalibrálásának eredményét elmentettük a " "beállításokban" @@ -13989,18 +16772,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Mostantól elérhető a különböző filamentek automatikus kalibrálása, amely " -"teljesen automatizált, és az eredményt a nyomtató elmenti. A kalibrálást " -"csak a következő esetekben kell elvégezned:\n" -"1. Ha új, különböző márkájú filamenteket töltesz be, vagy a filament " -"nedves.\n" -"2. Ha a fúvóka elhasználódott vagy kicserélted egy újra.\n" -"3. Ha a maximális volumetrikus sebesség vagy a nyomtatási hőmérséklet " -"megváltozott a filamentbeállításokban." msgid "About this calibration" msgstr "Információ a kalibrálásról" @@ -14032,22 +16807,13 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -14092,22 +16858,6 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not " -"be suitable for this calibration and can produce less-than-desirable " -"results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before performing it." msgid "When you need Max Volumetric Speed Calibration" msgstr "Mikor van szükség a max. volumetrikus sebesség kalibrálására" @@ -14144,22 +16894,12 @@ msgstr "" "* Javasoljuk, hogy a névhez add hozzá a márkát, az anyagot, a típust, " "illetve a páratartalmat is" -msgid "Failed" -msgstr "Sikertelen" - msgid "Please enter the name you want to save to printer." msgstr "Kérjük, add meg a nevet." msgid "The name cannot exceed 40 characters." msgstr "A név nem haladhatja meg a 40 karaktert." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Az azonos nevű eredmények közül csak az egyik kerül elmentésre. Biztos, hogy " -"felül akarod írni a többi eredményt?" - msgid "Please find the best line on your plate" msgstr "Keresd meg a legjobb vonalat a tálcán" @@ -14172,11 +16912,8 @@ msgstr "Bemeneti érték" msgid "Save to Filament Preset" msgstr "Mentés a filamentbeállításokba" -msgid "Preset" -msgstr "Beállítás" - msgid "Record Factor" -msgstr "Record Factor" +msgstr "" msgid "We found the best flow ratio for you" msgstr "Megtaláltuk a legjobb anyagáramlást" @@ -14209,9 +16946,6 @@ msgstr "Kalibrálás 2 kihagyása" msgid "flow ratio : %s " msgstr "anyagáramlás: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Kérjük, válaszd a legsimább felülettel rendelkező blokkot" - msgid "Please choose a block with smoothest top surface." msgstr "Kérjük, válaszd ki a legsimább felülettel rendelkező blokkot." @@ -14241,22 +16975,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Nyomtatási paraméterek" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" -msgstr "Plate Type" +msgstr "" msgid "filament position" msgstr "filamentpozíció" -msgid "External Spool" -msgstr "Külső tekercs" - msgid "Filament For Calibration" msgstr "Filament a kalibráláshoz" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Tippek a kalibrációs anyaghoz:\n" "- Anyagok megegyező asztalhőmérséklettel\n" @@ -14276,9 +17025,23 @@ msgstr "%s nem kompatibilis ezzel: %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "Nem használhatsz TPU-t az áramlásdinamika kalibrálásához." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Csatlakozás a nyomtatóhoz" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "K értéktől" @@ -14297,11 +17060,14 @@ msgstr "Ettől a volumetrikus sebességtől" msgid "To Volumetric Speed" msgstr "Eddig a volumetrikus sebességig" +msgid "Are you sure you want to cancel this print?" +msgstr "Biztosan megszakítod ezt a nyomtatást?" + msgid "Flow Dynamics Calibration Result" msgstr "Áramlásdinamikai kalibrációs eredmény" msgid "New" -msgstr "New" +msgstr "" msgid "No History Result" msgstr "Nincs előzmény" @@ -14317,25 +17083,38 @@ msgstr "Művelet" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Áramlásdinamikai kalibráció szerkesztése" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "" msgid "Ok" msgstr "Ok" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "" + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" msgstr "Hálózati keresés" msgid "Address" -msgstr "Address" +msgstr "" msgid "Hostname" msgstr "Host név:" @@ -14364,13 +17143,10 @@ msgstr "" msgid "PA Calibration" msgstr "PA kalibrálás" -msgid "DDE" +msgid "Extruder type" msgstr "" -msgid "Bowden" -msgstr "Bowden" - -msgid "Extruder type" +msgid "DDE" msgstr "" msgid "PA Tower" @@ -14391,14 +17167,32 @@ msgstr "Befejező PA:" msgid "PA step: " msgstr "PA lépcső: " +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" + msgid "Print numbers" msgstr "Számok nyomtatása" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Kérjük, adj meg érvényes értékeket:\n" "Kezdő PA: >= 0.0\n" @@ -14408,6 +17202,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Hőmérséklet kalibrálás" +msgid "Filament type" +msgstr "Filament típusa" + msgid "PLA" msgstr "PLA" @@ -14429,9 +17226,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filament típusa" - msgid "Start temp: " msgstr "Kezdőhőmérséklet: " @@ -14441,11 +17235,14 @@ msgstr "Befejező hőmérséklet: " msgid "Temp step: " msgstr "Hőmérséklet lépcső: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" @@ -14457,14 +17254,14 @@ msgstr "Kezdő volumetrikus sebesség: " msgid "End volumetric speed: " msgstr "Befejező volumetrikus sebesség: " -msgid "step: " -msgstr "lépcső: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "VFA test" @@ -14476,11 +17273,14 @@ msgstr "Kezdősebesség: " msgid "End speed: " msgstr "Befejező sebesség: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "Start retraction length: " @@ -14489,10 +17289,131 @@ msgstr "Kezdő visszahúzás hossza: " msgid "End retraction length: " msgstr "Befejező visszahúzási hossz:" -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "G-kód küldése a nyomtató gazdagépének" msgid "Upload to Printer Host with the following filename:" @@ -14539,23 +17460,40 @@ msgstr "Kiválasztott törlése" msgid "Show error message" msgstr "Hibaüzenet megjelenítése" -msgid "Enqueued" +msgid "Queued" msgstr "Sorban áll" msgid "Uploading" msgstr "Feltöltés" -msgid "Cancelling" +msgid "Canceling" msgstr "Megszakítás" msgid "Error uploading to print host" msgstr "" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + msgid "Unable to perform boolean operation on selected parts" msgstr "Nem lehet logikai műveletet végrehajtani a kiválasztott tárgyakon" msgid "Mesh Boolean" -msgstr "Mesh Boolean" +msgstr "Modellháló logikai műveletek" msgid "Union" msgstr "Egyesítés" @@ -14611,13 +17549,13 @@ msgstr "Rendszerverzió:" msgid "DNS Server:" msgstr "DNS kiszolgáló:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "Bing.com tesztelése" msgid "Test bing.com:" @@ -14681,7 +17619,7 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "Custom vendor missing; please input custom vendor." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "A „Bambu” vagy „Generic” nem használható gyártóként egyedi filamentek " "esetében." @@ -14689,7 +17627,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "A filament típusa nem lett kiválasztva, kérjük, válaszd ki a típust." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "Filament serial missing; please input serial." msgid "" @@ -14702,8 +17640,8 @@ msgstr "" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "Az egyedi gyártó vagy sorozat értéke üres. Kérjük, írd be újra." -msgid "The vendor can not be a number. Please re-enter." -msgstr "The vendor can not be a number; please re-enter." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "" msgid "" "You have not selected a printer or preset yet. Please select at least one." @@ -14713,7 +17651,7 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" @@ -14732,8 +17670,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" @@ -14757,21 +17695,27 @@ msgstr "Beállítás importálása" msgid "Create Type" msgstr "Típus létrehozása" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "The model was not found; please reselect vendor." -msgid "Select Model" -msgstr "Válassz modellt" - msgid "Select Printer" msgstr "Válassz nyomtatót" +msgid "Select Model" +msgstr "Válassz modellt" + msgid "Input Custom Model" msgstr "Egyedi modell megadása" msgid "Can't find my printer model" msgstr "Nem találom a nyomtató modelljét" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Négyzet" @@ -14781,15 +17725,9 @@ msgstr "Nyomtatási terület" msgid "Hot Bed STL" msgstr "Tárgyasztal STL" -msgid "Load stl" -msgstr "STL betöltése" - msgid "Hot Bed SVG" msgstr "Tárgyasztal SVG" -msgid "Load svg" -msgstr "SVG betöltése" - msgid "Max Print Height" msgstr "Maximális nyomtatási magasság" @@ -14803,16 +17741,16 @@ msgstr "" "Kivétel történt a fájlméret megállapításakor, kérjük ismételd meg az " "importálást." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Útvonal nem található. Kérjük, válaszd ki újra a gyártót." msgid "The printer model was not found, please reselect." msgstr "A nyomtató modellje nem található, kérjük, válaszd ki újra." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "The nozzle diameter was not found; please reselect." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "The printer preset was not found; please reselect." msgid "Printer Preset" @@ -14827,9 +17765,6 @@ msgstr "Kijelölés megszüntetése" msgid "Process Preset Template" msgstr "Folyamatbeállítás sablon" -msgid "Back Page 1" -msgstr "Vissza az 1. oldalra" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -14844,9 +17779,6 @@ msgstr "" "Tiltott karakter került be az első oldalon a nyomtatási terület részbe. " "Kérjük, csak számokat használj." -msgid "The custom printer or model is not inputed, place input." -msgstr "The custom printer or model missing; please input." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -14876,14 +17808,14 @@ msgstr "A következő filamentbeállítások létrehozása nem sikerült:\n" msgid "Create process presets failed. As follows:\n" msgstr "A következő folyamatbeállítások létrehozása nem sikerült:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Gyártó nem található. Kérjük, válaszd ki újból." msgid "Current vendor has no models, please reselect." msgstr "A kiválasztott gyártónak nincsenek modelljei. Kérjük, válassz másikat." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "Nem választottad ki a gyártót és modellt, vagy nem adtál meg egy egyedi " @@ -14908,10 +17840,18 @@ msgid "" msgstr "" "Nem választottál nyomtatót a fúvókacseréhez. Kérjük, válassz egy nyomtatót." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Nyomtató sikeresen létrehozva" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Filament Created Successfully" msgid "Printer Created" @@ -14939,7 +17879,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" @@ -14991,13 +17931,20 @@ msgstr "" "If not, a time suffix will be added, and you can modify the name after " "creation." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "Felhasználói filamentbeállítások.\n" @@ -15045,7 +17992,7 @@ msgid "Please select a type you want to export" msgstr "Válaszd ki az exportálandó beállítás típusát" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" msgid "Edit Filament" msgstr "Filament szerkesztése" @@ -15060,7 +18007,7 @@ msgstr "" "Megjegyzés: Ha a filamenthez tartozó utolsó beállítás is törlődik, akkor a " "filament szintén törlésre kerül a párbeszédablak bezárása után." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "A más beállítások által örökölt beállítások nem törölhetők" msgid "The following presets inherits this preset." @@ -15071,6 +18018,15 @@ msgstr[1] "" msgid "Delete Preset" msgstr "Beállítás törlése" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Biztosan törlöd a kiválasztott beállítást?\n" +"Ha ez a filament jelenleg használatban van a nyomtatón, kérjük, töröld az " +"adott férőhelyen a filamentadatokat." + msgid "Are you sure to delete the selected preset?" msgstr "Biztosan törlöd a kiválasztott beállítást?" @@ -15080,15 +18036,12 @@ msgstr "Beállítás törlése" msgid "+ Add Preset" msgstr "+ Beállítás hozzáadása" -msgid "Delete Filament" -msgstr "Filament törlése" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"A filamenthez tartozó összes beállítás törölve lesz. \n" +"A filamenthez tartozó összes beállítás törölve lesz.\n" "Ha ez a filament jelenleg használatban van a nyomtatón, kérjük, töröld az " "adott férőhelyen a filamentadatokat." @@ -15123,19 +18076,34 @@ msgid "Daily Tips" msgstr "Napi tippek" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "eltárolt fúvóka: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Your nozzle diameter in preset is not consistent with the saved nozzle " -"diameter. Have you changed your nozzle?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "* %s anyag nyomtatása ezzel: %s a fúvóka eltömődéséhez vezethet" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Ki kell választanod a nyomtatót" @@ -15143,6 +18111,35 @@ msgstr "Ki kell választanod a nyomtatót" msgid "The start, end or step is not valid value." msgstr "A kezdő-, vég- vagy lépésérték nem érvényes." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15165,9 +18162,6 @@ msgstr "Sikerült!" msgid "Are you sure to log out?" msgstr "" -msgid "Refresh Printers" -msgstr "Nyomtatók frissítése" - msgid "View print host webui in Device tab" msgstr "" @@ -15214,22 +18208,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "A nyomtatóállomás típusa nem egyezik: %s" -msgid "Connection to AstroBox works correctly." -msgstr "Connection to AstroBox is working correctly." +msgid "Connection to AstroBox is working correctly." +msgstr "" msgid "Could not connect to AstroBox" msgstr "Nem sikerült csatlakozni az AstroBoxhoz" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Note: AstroBox version 1.1.0 or higher is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet is working correctly." +msgid "Connection to Duet is working correctly." +msgstr "" msgid "Could not connect to Duet" msgstr "Nem sikerült csatlakozni a Duethez" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Ismeretlen hiba történt" msgid "Wrong password" @@ -15241,8 +18235,8 @@ msgstr "Nem sikerült erőforrásokat szerezni új kapcsolat létrehozásához" msgid "Upload not enabled on FlashAir card." msgstr "A feltöltés nincs engedélyezve a FlashAir kártyán." -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "Connection to FlashAir is working correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "" msgid "Could not connect to FlashAir" msgstr "Nem sikerült csatlakozni a FlashAirhez" @@ -15254,29 +18248,29 @@ msgstr "" "Megjegyzés: FlashAir 2.00.02 vagy újabb firmware és bekapcsolt feltöltési " "funkció szükséges." -msgid "Connection to MKS works correctly." -msgstr "Connection to MKS is working correctly." +msgid "Connection to MKS is working correctly." +msgstr "" msgid "Could not connect to MKS" msgstr "Nem sikerült csatlakozni az MKS-hez" -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint is working correctly." +msgid "Connection to OctoPrint is working correctly." +msgstr "" msgid "Could not connect to OctoPrint" msgstr "Nem sikerült csatlakozni az OctoPrinthez" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version 1.1.0 or higher is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Connection to Prusa SL1 / SL1S is working correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "" msgid "Could not connect to Prusa SLA" msgstr "Nem sikerült csatlakozni a Prusa SLA-hoz" -msgid "Connection to PrusaLink works correctly." -msgstr "Connection to PrusaLink is working correctly." +msgid "Connection to PrusaLink is working correctly." +msgstr "" msgid "Could not connect to PrusaLink" msgstr "Nem sikerült csatlakozni a PrusaLinkhez" @@ -15299,20 +18293,20 @@ msgstr "" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "" msgid "Could not connect to Prusa Connect" msgstr "" -msgid "Connection to Repetier works correctly." -msgstr "Connection to Repetier is working correctly." +msgid "Connection to Repetier is working correctly." +msgstr "" msgid "Could not connect to Repetier" msgstr "Nem sikerült csatlakozni a Repetierhez" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Note: Repetier version 0.90.0 or higher is required." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "" #, boost-format msgid "" @@ -15343,255 +18337,477 @@ msgstr "" "Hiba: „%2%”" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "Asztalszintezés" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "" + +msgid "Sent Time" +msgstr "" + +msgid "There are no tasks to be sent!" +msgstr "" + +msgid "No historical tasks!" +msgstr "" + +msgid "Upgrading" +msgstr "" + +msgid "syncing" +msgstr "" + +msgid "Printing Finish" +msgstr "" + +msgid "Printing Failed" +msgstr "" + +msgid "Printing Pause" +msgstr "" + +msgid "Pending" +msgstr "" + +msgid "Sending" +msgstr "Küldés" + +msgid "Sending Finish" +msgstr "" + +msgid "Sending Cancel" +msgstr "" + +msgid "Sending Failed" +msgstr "" + +msgid "Print Success" +msgstr "" + +msgid "Print Failed" +msgstr "" + +msgid "Removed" +msgstr "" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" msgstr "" @@ -15614,10 +18830,10 @@ msgstr "" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." @@ -15629,7 +18845,110 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" -msgid "User cancelled." +msgid "User canceled." +msgstr "" + +msgid "Head diameter" +msgstr "Fej átmérő" + +msgid "Max angle" +msgstr "" + +msgid "Detection radius" +msgstr "" + +msgid "Remove selected points" +msgstr "Kijelölt pontok eltávolítása" + +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "Pontok automatikus generálása" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " érvénytelen karimás fülek" + +msgid "Brim Ears" +msgstr "Karimás Fülek" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15689,7 +19008,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" #: resources/data/hints.ini: [hint:Reverse on odd] @@ -15730,7 +19049,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatikus elrendezés\n" "Tudtad, hogy automatikusan elrendezheted a projekt összes objektumát?" @@ -15739,7 +19058,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Automatikus orientáció\n" "Tudtad, hogy az objektumokat egy kattintással elforgathatod a nyomtatáshoz " @@ -15903,7 +19222,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Perem a jobb tapadás érdekében\n" @@ -15914,7 +19233,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Paraméterek beállítása több objektumhoz\n" "Tudtad, hogy egyszerre is beállíthatod a szeletelési paramétereket az összes " @@ -15932,8 +19251,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Öblítés támaszokba/objektumokba/kitöltésbe\n" "Tudtad, hogy csökkentheted a felhasznált filament mennyiségét, ha a " @@ -15949,13 +19268,14 @@ msgstr "" "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a " "modell szilárdságát?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Mikor nyomtass nyitott ajtóval\n" "Tudtad, hogy a nyomtató ajtajának kinyitásával csökkentheted az extruder/" @@ -15967,21 +19287,890 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Vetemedés elkerülése\n" "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a " "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?" +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptív rétegmagasság" + +#~ msgid "AMS not connected" +#~ msgstr "Az AMS nincs csatlakoztatva" + +#~ msgid "Ext Spool" +#~ msgstr "Kül. tekercs" + +#~ msgid "Guide" +#~ msgstr "Útmutató" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS kalibrálása..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "A kalibráció során probléma merült fel. Kattintson a megoldás " +#~ "megtekintéséhez." + +#~ msgid "Calibrate again" +#~ msgstr "Kalibrálja újra" + +#~ msgid "Cancel calibration" +#~ msgstr "Kalibrálás megszakítása" + +#~ msgid "Feed Filament" +#~ msgstr "Filament betöltése" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "" +#~ "A nyomtatóra való küldés előtt be kell helyezned egy MicroSD-kártyát." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Megjegyzés: Csak az ugyanazzal az anyagtípussal feltöltött AMS helyek " +#~ "választhatók ki." + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "Az AMS képes megbecsülni, hogy mennyi filament maradt egy Bambu filament " +#~ "tekercsen, a filament információinak frissítése során. Nyomtatás közben a " +#~ "maradék mennyiség automatikusan frissül." + +#, fuzzy +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Az ajánlott minimum hőmérséklet kevesebb, mint 190 fok, vagy az ajánlott " +#~ "maximális hőmérséklet nagyobb, mint 300 fok.\n" + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "XY mechanika ellenőrzése" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Megállítva, mert kifogyott a filament" + +#~ msgid "Heating hotend" +#~ msgstr "Hotend fűtése" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Extrudálás kalibrálása" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Nyomtatás szüneteltetve a felhasználó által" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Szünet az előlap leesése miatt" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Anyagáramlás kalibrálása" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Szüneteltetve a fúvóka hőmérsékletének rendellenessége miatt" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Szüneteltetve a tárgyasztal hőmérsékletének rendellenessége miatt" + +#~ msgid "Skip step pause" +#~ msgstr "Lépésvesztés miatti szünet" + +#~ msgid "Motor noise calibration" +#~ msgstr "Motorzaj-kalibrálás" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Szüneteltetve az AMS elvesztése miatt" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Szüneteltetve a heat break ventilátor alacsony fordulatszáma miatt" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Szüneteltetve a kamra hőmérséklet-szabályzó hibája miatt" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Szüneteltetve a felhasználó által beillesztett G-kód miatt" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Szüneteltetve a fúvókára került filament miatt" + +#~ msgid "Cutter error pause" +#~ msgstr "Szüneteltetve a filamentvágó meghibásodása miatt" + +#~ msgid "First layer error pause" +#~ msgstr "Szüneteltetve a kezdőrétegen található hiba miatt" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Szüneteltetve a fúvóka eltömődése miatt" + +#~ msgid "Fatal" +#~ msgstr "Súlyos" + +#~ msgid "Serious" +#~ msgstr "Komoly" + +#~ msgid "Common" +#~ msgstr "Gyakori" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "A Bambu PET-CF/PA6-CF filament nem használható az AMS-sel." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Egy objektum a tálca határvonalán túlra került, vagy túllépi a magassági " +#~ "határt.\n" +#~ "Kérjük, orvosold a problémát azzal, hogy teljesen a lemezre helyezed és " +#~ "győződj meg, hogy a magassága belefér a nyomtatótérbe." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Ezt a \"Beállítások > Hálózat > Csatlakozási kód\" menüpontban\n" +#~ "találod a nyomtatón, ahogy az ábrán látható:" + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Kérjük, ellenőrizd az SD-kártyát a nyomtatóban.\n" +#~ "Ha továbbra sem olvasható, próbáld meg formázni az SD-kártyát." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "A tárhely nem elérhető; kérjük helyezz be egy MicroSD-kártyát." + +#~ msgid "Cham" +#~ msgstr "Cham" + +#~ msgid "Still unload" +#~ msgstr "Még kitöltődik" + +#~ msgid "Still load" +#~ msgstr "Még töltődik" + +#~ msgid "Can't start this without SD card." +#~ msgstr "MicroSD kártya nélkül nem indítható." + +#~ msgid "Update" +#~ msgstr "Frissítés" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Szüneteltetés érzékenysége" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Nem található AMS-filament. Kérjük, válassz egy nyomtatót az „Nyomtató” " +#~ "oldalon az AMS információk betöltéséhez." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Ha szinkronizálod a filamenteket az AMS-sel, akkor az összes jelenleg " +#~ "kiválasztott filamentbeállítás és szín felülírásra kerül. Folytatod?" + +#~ msgid "Sync" +#~ msgstr "Sync" + +#~ msgid "Resync" +#~ msgstr "Resync" + +#~ msgid "General Settings" +#~ msgstr "Általános beállítások" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "A nap tippje értesítés megjelenítése indítás után" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Ha engedélyezve van, hasznos tippek jelennek meg indításkor." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Öblítési mennyiség: Automatikus kiszámításra kerül minden színcserekor." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Ha engedélyezve van, automatikusan kiszámításra kerül minden színcsere " +#~ "alkalmával." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Flushing volumes: Auto-calculate every time the filament is changed." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "If enabled, auto-calculate every time filament is changed" + +#~ msgid "User Sync" +#~ msgstr "Felhasználó szinkronizálás" + +#~ msgid "Downloads" +#~ msgstr "Letöltések" + +#~ msgid "Dark Mode" +#~ msgstr "Sötét mód" + +#~ msgid "Home page and daily tips" +#~ msgstr "Kezdőoldal és napi tippek" + +#~ msgid "Show home page on startup" +#~ msgstr "Kezdőlap megjelenítése indításkor" + +#~ msgid "Send print job to" +#~ msgstr "Nyomtatási feladat küldése" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "%s filament nem fér el a rendelkezésre álló AMS-férőhelyben. Kérjük, " +#~ "frissítsd a nyomtató szoftverét az AMS-kiosztás támogatásához." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "A filament nem fér el a rendelkezésre álló AMS-férőhelyben. Kérjük, " +#~ "frissítsd a nyomtató szoftverét az AMS-kiosztás támogatásához." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Megtörtént a filamentek AMS férőhelyekhez való kiosztása. Kattints egy " +#~ "fenti filamentre az AMS kiosztás megváltoztatásához" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Kérjük, a nyomtatás megkezdése előtt kattints a fenti filamentekre, hogy " +#~ "megadd a hozzájuk tartozó AMS férőhelyet" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "A nyomtató firmware-je csak a szekvenciális filamentkiosztást támogatja = " +#~ "> AMS férőhely" + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Nyomtatás előtt be kell helyezned egy microSD kártyát." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "A timelapse rögzítéséhez egy microSD kártyára van szükség." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "eltárolt fúvóka: %.1f %s" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Csatlakozás a nyomtatóhoz. A csatlakozási folyamatot nem lehetett " +#~ "megszakítani." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Figyelem! A „Textured PEI“ tálcán való áramláskalibrálás a durva felület " +#~ "miatt hamis eredményeket adhat." + +#~ msgid "Send to Printer SD card" +#~ msgstr "Küldés a nyomtatóban lévő MicroSD kártyára" + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "A nyomtató nem támogatja a MicroSD kártyára küldést." + +#~ msgid "Auto-Calc" +#~ msgstr "Automatikus számítás" + +#~ msgid "unloaded" +#~ msgstr "unloaded" + +#~ msgid "loaded" +#~ msgstr "betöltve" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Ettől:" + +#~ msgid "To" +#~ msgstr "Eddig:" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ "túl közel van más tárgyakhoz, a nyomtatás során előfordulhatnak ütközések." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Nem nyomtathatsz több, nagy hőmérséklet-különbséggel rendelkező " +#~ "filamentet egyidőben. Ellenkező esetben az extruder és a fúvóka " +#~ "eltömődhet vagy megsérülhet nyomtatás közben" + +#~ msgid "Remove small overhangs" +#~ msgstr "Kis túlnyúlások eltávolítása" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Eltávolítja a kis túlnyúlásokat, amelyek esetleg nem igényelnek " +#~ "alátámasztást." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Az azonos nevű eredmények közül csak az egyik kerül elmentésre. Biztos, " +#~ "hogy felül akarod írni a többi eredményt?" + +#~ msgid "External Spool" +#~ msgstr "Külső tekercs" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "The custom printer or model missing; please input." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "fúvóka a beállításban: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Your nozzle diameter in preset is not consistent with the saved nozzle " +#~ "diameter. Have you changed your nozzle?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "* %s anyag nyomtatása ezzel: %s a fúvóka eltömődéséhez vezethet" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Egérgörgő" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Egérgörgő" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + bal egérgomb" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Left mouse button:" +#~ msgstr "Bal egérgomb:" + +#~ msgid "Right mouse button:" +#~ msgstr "Jobb egérgomb:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + bal egérgomb" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + jobb egérgomb:" + +#~ msgid "Recent projects" +#~ msgstr "Legutóbbi projektek" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Bármilyen nyíl gomb" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Bal egérgomb" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Bal egérgomb" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Bármelyik nyílgomb" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+bal egérgomb" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Bal egérgomb" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Bal egérgomb" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+Bármelyik nyílgomb" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Egérgörgő" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Egérgörgő" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Egérgörgő" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Egérgörgő" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+Egérgörgő" + +#~ msgid "Set Position" +#~ msgstr "Pozíció beállítása" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Kattints jobb gombbal az ikonra a modell objektum javításához" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "A kijelölt objektum csak egy tárgyat tartalmaz, ezért nem lehet tovább " +#~ "bontani." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Színséma" + +#~ msgid "Percent" +#~ msgstr "Százalék" + +#~ msgid "Used filament" +#~ msgstr "Használt filament" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Több..." + +#~ msgid "More calibrations" +#~ msgstr "További kalibrációk" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "MicroSD kártya" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Nincs MicroSD kártya" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Hibás MicroSD kártya" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "A(z) %s(%s) eszköz kiadása nem sikerült." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "Érvénytelen szám" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "eltárolt fúvóka: %.2f %s" + +#~ msgid "Ramming settings" +#~ msgstr "Tömörítési beállítások" + +#~ msgid "Profile dependencies" +#~ msgstr "Profilfüggőségek" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "A konfigurációs csomag nem kompatibilis a Snapmaker Orca jelenlegi " +#~ "verziójával." + +#~ msgid "Total ramming time" +#~ msgstr "Teljes tömörítési idő" + +#~ msgid "s" +#~ msgstr "mp" + +#~ msgid "Total rammed volume" +#~ msgstr "Teljes tömörített térfogat" + +#~ msgid "Ramming line width" +#~ msgstr "Tömörítési vonal szélessége" + +#~ msgid "Ramming line spacing" +#~ msgstr "Tömörítési vonal térköze" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Compatible machine" +#~ msgstr "Kompatibilis gép" + +#~ msgid "Compatible machine condition" +#~ msgstr "Kompatibilis gépállapot" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Kompatibilis folyamatprofil állapot" + +#~ msgid "Default filament color" +#~ msgstr "Alapértelmezett filament szín" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Az extruder által nyomtatható legnagyobb rétegmagasság: ez a maximális " +#~ "rétegmagasság korlátozására szolgál, ha az adaptív rétegmagasság " +#~ "engedélyezve van." + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Az extruder által nyomtatható legkisebb rétegmagasság: ez a minimum " +#~ "rétegmagasság korlátozására szolgál, ha az adaptív rétegmagasság " +#~ "engedélyezve van." + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Az extruderben lévő anyag egy része visszahúzásra kerül, ezáltal " +#~ "elkerülve a hosszabb mozgás során történő szivárgást. A visszahúzás " +#~ "kikapcsolásához állítsd nullára" + +#~ msgid "Speed of retractions." +#~ msgstr "Visszahúzások sebessége" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "A filament extruderbe történő visszatöltésének sebessége. A nulla azonos " +#~ "sebességet jelent a visszahúzással" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Az érintkező réteg vonalai közötti távolság. A nulla szilárd kitöltést " +#~ "jelent" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "A vékony elemek minimális vastagsága. Az ennél vékonyabb modellelemek nem " +#~ "lesznek kinyomtatva, míg a minimum méretnél nagyobb elemek a minimális " +#~ "falszélességre szélesednek. A fúvóka átmérőjének százalékában van " +#~ "kifejezve" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Mostantól elérhető a különböző filamentek automatikus kalibrálása, amely " +#~ "teljesen automatizált, és az eredményt a nyomtató elmenti. A kalibrálást " +#~ "csak a következő esetekben kell elvégezned:\n" +#~ "1. Ha új, különböző márkájú filamenteket töltesz be, vagy a filament " +#~ "nedves.\n" +#~ "2. Ha a fúvóka elhasználódott vagy kicserélted egy újra.\n" +#~ "3. Ha a maximális volumetrikus sebesség vagy a nyomtatási hőmérséklet " +#~ "megváltozott a filamentbeállításokban." + +#~ msgid "step: " +#~ msgstr "lépcső: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "STL betöltése" + +#~ msgid "Load svg" +#~ msgstr "SVG betöltése" + +#~ msgid "Back Page 1" +#~ msgstr "Vissza az 1. oldalra" + +#~ msgid "Delete Filament" +#~ msgstr "Filament törlése" + +#~ msgid "Refresh Printers" +#~ msgstr "Nyomtatók frissítése" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Kísérleti jelleggel hozzáadtunk egy \"Tree Slim\" nevű támaszt, amely " +#~ "kevesebb anyagot igényel, de emiatt gyengébb szilárdságú.\n" +#~ "Használatát a következőkkel javasoljuk: 0 érintkezőréteg, 0 felső " +#~ "távolság, 2 fal." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Az „Erős fa” és a „Hibrid fa” támaszok esetében a következő beállításokat " +#~ "javasoljuk: legalább 2 érintkező réteg, legalább 0,1 mm felső Z-távolság " +#~ "vagy támaszanyag használata." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "A támasz körüli falak száma" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Támasz: szerszámút generálása %d. réteg" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Támasz: túlnyúlások észlelése" + +#~ msgid "Support: propagate branches" +#~ msgstr "Támasz: ágak kiterjesztése" + +#~ msgid "Support: draw polygons" +#~ msgstr "Támasz: poligonok rajzolása" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Támasz: szerszámút generálása" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Támogatás: poligonok generálása %d. réteg" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Támasz: lyukak javítása %d. réteg" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Támasz: ágak kiterjesztése %d. réteg" + +#~ msgid "Stopped." +#~ msgstr "Megállítva." + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Initialization failed (Device connection not ready)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Sikertelen inicializálás (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN kapcsolódás sikertelen (nyomtatási fájl küldése)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "1. lépés: Ellenőrizd, hogy a Snapmaker Orca és a nyomtató ugyanazon a helyi " +#~ "hálózaton van." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2. lépés: Ha az alábbi IP és hozzáférési kód eltér a nyomtatón " +#~ "láthatótól, kérjük, javítsd ki őket." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "3. lépés: Pingeld meg az IP-címet a csomagveszteség és késleltetés " +#~ "ellenőrzéséhez." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Hűtés kényszerítése túlnyúlásoknál és áthidalásoknál" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Engedélyezd ezt az opciót a tárgyhűtő ventilátor fordulatszámának " +#~ "optimalizálásához a jobb hűtés érdekében túlnyúlásoknál és áthidalásoknál" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Ventilátor fordulatszám túlnyúlásnál" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "A nagy túlnyúlású áthidalások vagy túlnyúló falak nyomtatásakor a " +#~ "tárgyhűtő ventilátor kényszerítve lesz, hogy ezt a fordulatszámot " +#~ "használja. A túlnyúlások és áthidalások hűtésének kikényszerítésével jobb " +#~ "minőség érhető el ezeken a részeken." + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Túlnyúlás hűtésének küszöbértéke" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Kényszeríti a hűtőventilátort, hogy egy adott fordulatszámot használjon, " +#~ "ha a túlnyúlás mértéke meghaladja ezt az értéket. Százalékban van " +#~ "kifejezve, ami azt jelzi, hogy a nyomtatott vonal hány százaléka maradhat " +#~ "az alsóbb rétegek alátámasztása nélkül. A 0%%-os érték bekapcsolja a " +#~ "hűtést a külső fal teljes szélességén, függetlenül a túlnyúlás mértékétől." + +#~ msgid "Thick bridges" +#~ msgstr "Vastag áthidalások" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Átméretezés" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-tengely emelés visszahúzáskor" + +#~ msgid "Limited" +#~ msgstr "Korlátozott" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Csökkentsd kicsit ezt az értéket (például 0,9-re), hogy ezzel csökkentsd " +#~ "az áthidaláshoz használt anyag mennyiségét, és a megereszkedést" + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Ez a beállítás a felső szilárd kitöltésnél használt anyag mennyiségét " +#~ "befolyásolja. Kis mértékben csökkentve simább felület érhető el vele." + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Az áthidalások és a teljesen túlnyúló falak nyomtatási sebessége" + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Az új filament betöltésének ideje filament váltáskor, csak statisztikai " +#~ "célokra van használva." + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "A régi filament kitöltésének ideje filament váltáskor, csak statisztikai " +#~ "célokra van használva." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " +#~ "2.0) új filamentet tölt be a szerszámcsere során (a T kód " +#~ "végrehajtásakor). Ezt az időt a G-kód időbecslő hozzáadja a teljes " +#~ "nyomtatási időhöz." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " +#~ "2.0) az előző Filamenet kiüríti a szerszámcsere során (a T kód " +#~ "végrehajtásakor). Ezt az időt a G-kód időbecslő hozzáadja a teljes " +#~ "nyomtatási időhöz." + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Nem használhatsz különböző fúvókaátmérőt és filamentátmérőt, ha a " +#~ "törlőtorony engedélyezve van." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "A szivárgás elleni védelem nem működik, ha a törlőtorony engedélyezve van." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Szegmentált régió összekapcsolódási mélysége. A 0 érték letiltja ezt a " +#~ "funkciót." + #~ msgid "Please input a valid value (K in 0~0.3)" #~ msgstr "Kérjük, adj meg egy érvényes értéket (K 0-0,3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Kérjük, adj meg egy érvényes értéket (K 0-0,3; N 0,6-2,0)" -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "Printer local connection failed; please try again." - #~ msgid "" #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" #~ "\n" @@ -16042,12 +20231,6 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Keresd meg a tökéletesen extrudált sarkot" -#~ msgid "V" -#~ msgstr "V" - -#~ msgid "Export &Configs" -#~ msgstr "Export &Configs" - #~ msgid "Infill direction" #~ msgstr "Kitöltés iránya" @@ -16069,28 +20252,6 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Filament kitöltése" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Válassz egy AMS rekeszt, majd nyomd meg a \"Load\" vagy \"Unload\" gombot " -#~ "a filament automatikus be- vagy kitöltéséhez." - -#~ msgid "MC" -#~ msgstr "MC" - -#~ msgid "MainBoard" -#~ msgstr "MainBoard" - -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - #~ msgid "active" #~ msgstr "aktív" @@ -16131,7 +20292,7 @@ msgstr "" #~ "hogy a visszajelző nem a pontos értéket mutatja." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Megjegyzés: ha az új tekercs nyomtatás során kerül behelyezésre, az AMS " @@ -16147,8 +20308,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Sikertelen inicializálás (nem található kamera)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "A nyomtató a letöltéssel van elfoglalva; kérjük, várd meg, amíg a " #~ "letöltés befejeződik." @@ -16167,23 +20327,9 @@ msgstr "" #~ msgid "Load failed [%d]!" #~ msgstr "A betöltés sikertelen [%d]!" -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "Load failed [%d]" - -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Failed to fetch model infomation from printer." - -#~ msgid "Failed to parse model infomations." -#~ msgstr "Failed to parse model infomation" - #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16192,7 +20338,7 @@ msgstr "" #~ "másik beállításra való váltás után?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16209,7 +20355,7 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Konfigurációs csomag frissítve a következőre " -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "A konfiguráció nem tölthető be." #~ msgid "Movement:" @@ -16221,64 +20367,15 @@ msgstr "" #~ msgid "Auto Segment" #~ msgstr "Automatikus szegmentálás" -#~ msgid "Depth ratio" -#~ msgstr "Depth ratio" - #~ msgid "Prizm" #~ msgstr "Prizm" -#~ msgid "connector is out of cut contour" -#~ msgstr "connector is out of cut contour" - -#~ msgid "connectors are out of cut contour" -#~ msgstr "connectors are out of cut contour" - -#~ msgid "connector is out of object" -#~ msgstr "connector is out of object" - -#~ msgid "connectors is out of object" -#~ msgstr "Connectors must be on object surface." - -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "Invalid state. \n" -#~ "No one part is selected to keep after cut" - -#~ msgid "Edit Text" -#~ msgstr "Edit Text" - #~ msgid "Error! Unable to create thread!" #~ msgstr "Hiba. Nem sikerült létrehozni a szálat." #~ msgid "Exception" #~ msgstr "Kivétel" -#~ msgid "Choose SLA archive:" -#~ msgstr "Choose SLA archive:" - -#~ msgid "Import file" -#~ msgstr "Import file" - -#~ msgid "Import model and profile" -#~ msgstr "Import model and profile" - -#~ msgid "Import profile only" -#~ msgstr "Import profile only" - -#~ msgid "Import model only" -#~ msgstr "Import model only" - -#~ msgid "Accurate" -#~ msgstr "Accurate" - -#~ msgid "Balanced" -#~ msgstr "Balanced" - -#~ msgid "Quick" -#~ msgstr "Quick" - #~ msgid "" #~ "Discribe how long the nozzle will move along the last path when retracting" #~ msgstr "" @@ -16297,9 +20394,6 @@ msgstr "" #~ "egyszerűsítése lehetőséget. További információ a dokumentációban " #~ "található." -#~ msgid "Filling bed " -#~ msgstr "Filling bed" - #, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." #~ msgstr "%1% kitöltési mintázat nem támogatja a 100%%-os kitöltés." @@ -16313,9 +20407,6 @@ msgstr "" #~ "Igen - Váltás a vonalak mintázatra\n" #~ "Nem - Sűrűség visszaállítása az alapértelmezett, nem 100%-os értékre" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "A filament betöltése előtt melegítsd fel a fúvókát 170 fok fölé." - #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" #~ msgstr "" @@ -16328,22 +20419,12 @@ msgstr "" #~ msgid "This setting specify the count of walls around tree support" #~ msgstr "Ez a beállítás határozza meg a falak számát a fa támasz körül." -#, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " doesn't work at 100%% density " - -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Eszköz-Felületre fektetés" #~ msgid "Export as STL" #~ msgstr "Exportálás STL-ként" -#~ msgid "Check cloud service status" -#~ msgstr "Check cloud service status" - #~ msgid "Please input a valid value (K in 0~0.5)" #~ msgstr "Adj meg egy érvényes értéket (K 0-0,5 között)" @@ -16353,8 +20434,8 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Összes objektum exportálása STL-ként" -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "A 3mf nem kompatibilis, csak geometriai adatok kerülnek betöltésre!" +#~ msgid "The 3MF is not compatible, load geometry data only!" +#~ msgstr "A 3MF nem kompatibilis, csak geometriai adatok kerülnek betöltésre!" #~ msgid "Incompatible 3mf" #~ msgstr "Nem kompatibilis 3mf" @@ -16362,10 +20443,6 @@ msgstr "" #~ msgid "Add/Remove printers" #~ msgstr "Nyomtatók hozzáadása/eltávolítása" -#, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s is not supported by the AMS." - #~ msgid "Don't remind me of this version again" #~ msgstr "Ne emlékeztessen újra erre a verzióra." @@ -16393,125 +20470,6 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "belső-külső-belső/kitöltés" -#~ msgid "Export 3MF" -#~ msgstr "3MF exportálása" - -#~ msgid "Export project as 3MF." -#~ msgstr "Projekt exportálása 3MF formátumban." - -#~ msgid "Export slicing data" -#~ msgstr "Szeletelési adatok exportálása" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Szeletelési adatok exportálása egy mappába" - -#~ msgid "Load slicing data" -#~ msgstr "Szeletelési adatok betöltése" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Gyorsítótárazott szeletelési adatok betöltése mappából" - -#~ msgid "Slice" -#~ msgstr "Szeletelés" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "" -#~ "Tálcák szeletelése: 0 - összes tálca, i - i tálca, egyéb - érvénytelen" - -#~ msgid "Show command help." -#~ msgstr "Parancs súgó megjelenítése." - -#~ msgid "UpToDate" -#~ msgstr "Naprakész" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Frissítsd a 3mf konfigurációs értékeit a legújabbra." - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max triangle count per plate for slicing" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "max slicing time per plate in seconds" - -#~ msgid "Normative check" -#~ msgstr "Normative check" - -#~ msgid "Check the normative items." -#~ msgstr "Check the normative items." - -#~ msgid "Output Model Info" -#~ msgstr "Kimeneti modell információ" - -#~ msgid "Output the model's information." -#~ msgstr "Kimeneti modell információ." - -#~ msgid "Export Settings" -#~ msgstr "Beállítások exportálása" - -#~ msgid "Export settings to a file." -#~ msgstr "Beállítások exportálása egy fájlba." - -#~ msgid "Send progress to pipe" -#~ msgstr "Folyamat elküldése" - -#~ msgid "Send progress to pipe." -#~ msgstr "Folyamat elküldése." - -#~ msgid "Arrange Options" -#~ msgstr "Elrendezési lehetőségek" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Elrendezési lehetőségek: 0-letiltás, 1-engedélyezés, egyéb-auto" - -#~ msgid "Convert Unit" -#~ msgstr "Mértékegység átváltása" - -#~ msgid "Convert the units of model" -#~ msgstr "Modell mértékegységének átváltása" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "A modell méretezése egy lebegő tényezővel" - -#~ msgid "Load General Settings" -#~ msgstr "Általános beállítások betöltése" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Folyamat/gépbeállítások betöltése a megadott fájlból" - -#~ msgid "Load Filament Settings" -#~ msgstr "Filamentbeállítások betöltése" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Filamentbeállítások betöltése a megadott fájllistából" - -#~ msgid "Skip Objects" -#~ msgstr "Skip Objects" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Skip some objects in this print" - -#~ msgid "Output directory" -#~ msgstr "Kimeneti mappa" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Az exportált fájlok kimeneti mappája." - -#~ msgid "Debug level" -#~ msgstr "Hibakeresés szintje" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" - #~ msgid "" #~ "3D Scene Operations\n" #~ "Did you know how to control view and object/part selection with mouse and " @@ -16521,24 +20479,6 @@ msgstr "" #~ "Tudod, hogyan változtathatod meg a nézetet és hogyan választhatod ki az " #~ "objektumot/tárgyat egérrel és érintőképernyővel a 3D-jelenetben?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Modell javítása\n" -#~ "Tudtad, hogy a sérült 3D-modelleket megjavíthatod, amivel elkerülhetsz " -#~ "sok szeletelési problémát?" - -#~ msgid "Embeded" -#~ msgstr "Embedded" - -#~ msgid "Online Models" -#~ msgstr "Online Models" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Show online staff-picked models on the home page" - #~ msgid "The minimum printing speed when slow down for cooling" #~ msgstr "A minimum nyomtatási sebesség hűtés miatti lassításkor." @@ -16586,14 +20526,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "Extrudálás kalibrálása" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Push new filament into the extruder" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "A többi réteg asztalhőmérséklete több mint %d Celsius-fokkal alacsonyabb, " #~ "mint a kezdőréteg hőmérséklete.\n" @@ -16611,36 +20548,18 @@ msgstr "" #~ "Kérjük, hogy a nyomtatás során tartsd nyitva a nyomtatót, vagy csökkentsd " #~ "az asztalhőmérsékletet." -#~ msgid "Total Time Estimation" -#~ msgstr "Total Time Estimation" - #~ msgid "Resonance frequency identification" #~ msgstr "Rezonanciafrekvencia meghatározása" -#~ msgid "Immediately score" -#~ msgstr "Immediately score" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Please give a score for your favorite Bambu Market model." - -#~ msgid "Score" -#~ msgstr "Score" - -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "Bambu High Temperature Plate" - #~ msgid "Can't connect to the printer" #~ msgstr "Nem lehet csatlakozni a nyomtatóhoz" #~ msgid "Recommended temperature range" #~ msgstr "Ajánlott hőmérséklet-tartomány" -#~ msgid "High Temp Plate" -#~ msgstr "High Temp Plate" - #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Asztalhőmérséklet a magas hőmérsékletű tálca használatával. A 0 érték azt " #~ "jelenti, hogy a filament nem támogatja a High Temp Plate-re történő " @@ -16680,4 +20599,4 @@ msgstr "" #~ "leválik az asztalról nyomtatás közben" #~ msgid "Orient the model" -#~ msgstr "Modell orientációja" +#~ msgstr "Modell orientációja" \ No newline at end of file diff --git a/localization/i18n/it/Snapmaker_Orca_it.po b/localization/i18n/it/Snapmaker_Orca_it.po index 241f7c8c96..7488bd7677 100644 --- a/localization/i18n/it/Snapmaker_Orca_it.po +++ b/localization/i18n/it/Snapmaker_Orca_it.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -12,13 +12,123 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" -"X-Generator: Poedit 3.4.2\n" +"X-Generator: Poedit 3.5\n" -msgid "Supports Painting" -msgstr "Pittura Supporti" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + Rotella del mouse" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "Il TPU non è supportato dall'AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Il PVA umido diventerà flessibile e rimarrà bloccato all'interno dell'AMS, " +"si prega di fare attenzione ad asciugarlo prima dell'uso." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"I filamenti CF/GF sono duri e fragili. È facile romperli o creare " +"inceppamenti nell'AMS. Si prega di utilizzarli con cautela." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Umidità AMS attuale" + +msgid "Humidity" +msgstr "Umidità" + +msgid "Temperature" +msgstr "Temperatura" + +msgid "Left Time" +msgstr "Tempo rimanente" + +msgid "Drying" +msgstr "Asciugatura" + +msgid "Idle" +msgstr "Inattivo" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Seriale:" + +msgid "Version:" +msgstr "Versione:" + +msgid "Latest version" +msgstr "Ultima versione" + +msgid "Support Painting" +msgstr "Dipingi supporti" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Maiusc+" + +msgid "Mouse wheel" +msgstr "Rotellina del mouse" msgid "Section view" msgstr "Vista in sezione" @@ -26,9 +136,6 @@ msgstr "Vista in sezione" msgid "Reset direction" msgstr "Ripristina direzione" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Rotella del mouse" - msgid "Pen size" msgstr "Dimensione penna" @@ -36,7 +143,7 @@ msgid "Left mouse button" msgstr "Tasto sinistro mouse" msgid "Enforce supports" -msgstr "Rinforzi supporti" +msgstr "Supporti di rinforzo" msgid "Right mouse button" msgstr "Tasto destro mouse" @@ -44,32 +151,29 @@ msgstr "Tasto destro mouse" msgid "Block supports" msgstr "Blocca supporti" -msgid "Shift + Left mouse button" -msgstr "Shift + Tasto sinistro mouse" - msgid "Erase" msgstr "Elimina" msgid "Erase all painting" -msgstr "Cancellare tutta la pittura" +msgstr "Cancella tutto" msgid "Highlight overhang areas" msgstr "Evidenziare le sporgenze" msgid "Gap fill" -msgstr "Riempimento gap" +msgstr "Riempi spazio vuoto" msgid "Perform" -msgstr "Eseguire" +msgstr "Esegui" msgid "Gap area" -msgstr "Area Gap" +msgstr "Area spazio vuoto" msgid "Tool type" msgstr "Tipo di strumento" msgid "Smart fill angle" -msgstr "Angolo riempimento intelligente" +msgstr "Angolo di riempimento intelligente" msgid "On overhangs only" msgstr "Solo sulle sporgenze" @@ -87,11 +191,11 @@ msgid "Fill" msgstr "Riempi" msgid "Gap Fill" -msgstr "Riempimento gap" +msgstr "Riempi spazio vuoto" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Consente di pitturare solo sulle sfaccettature selezionate da: \"%1%\"" +msgstr "Consente di dipingere solo sulle facce selezionate da: \"%1%\"" msgid "Highlight faces according to overhang angle." msgstr "Evidenziare le facce in base all'angolo di sporgenza." @@ -103,14 +207,14 @@ msgid "Support Generated" msgstr "Supporto generato" msgid "Gizmo-Place on Face" -msgstr "Gizmo-Posiziona su faccia" +msgstr "Strumento selezione faccia come base" msgid "Lay on face" msgstr "Posiziona su faccia" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Il numero di filamenti supera il numero massimo supportato dallo strumento " @@ -148,19 +252,28 @@ msgid "Smart fill" msgstr "Riempimento intelligente" msgid "Bucket fill" -msgstr "Riempimento Secchio" +msgstr "Riempimento colore" msgid "Height range" msgstr "Intervallo altezza" -msgid "Alt + Shift + Enter" -msgstr "Alt + Maiusc + Invio" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" -msgstr "Attiva Wireframe" +msgstr "Attiva/disattiva modello reticolato" + +msgid "Remap filaments" +msgstr "Rimappa filamenti" + +msgid "Remap" +msgstr "Rimappa" + +msgid "Cancel" +msgstr "Annulla" msgid "Shortcut Key " -msgstr "Shortcut Key " +msgstr "Tasto di scelta rapida " msgid "Triangle" msgstr "Triangolo" @@ -179,19 +292,43 @@ msgstr "Rimuovi colore dipinto" #, boost-format msgid "Painted using: Filament %1%" -msgstr "Pitturato utilizzando: Filamento %1%" +msgstr "Dipinto utilizzando: Filamento %1%" + +msgid "Filament remapping finished." +msgstr "Rimappatura filamenti completata." + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Misura del pennello" + +msgid "Brush shape" +msgstr "Forma del pennello" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" msgid "Move" msgstr "Sposta" +msgid "Please select at least one object." +msgstr "Si prega di selezionare almeno un oggetto." + msgid "Gizmo-Move" -msgstr "Gizmo-Sposta" +msgstr "Strumento di spostamento" msgid "Rotate" msgstr "Ruota" msgid "Gizmo-Rotate" -msgstr "Gizmo-Ruota" +msgstr "Strumento di rotazione" msgid "Optimize orientation" msgstr "Ottimizza orientamento" @@ -203,7 +340,7 @@ msgid "Scale" msgstr "Ridimensiona" msgid "Gizmo-Scale" -msgstr "Gizmo-Ridimensiona" +msgstr "Strumento di ridimensionamento" msgid "Error: Please close all toolbar menus first" msgstr "Errore: chiudi prima tutti i menu della barra degli strumenti" @@ -214,14 +351,20 @@ msgstr "in" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "Selezione parte" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "Ridimensionamento su un solo lato" + msgid "Position" msgstr "Posizione" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotazione" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Rapporti di scala" @@ -233,14 +376,11 @@ msgid "Volume Operations" msgstr "Operazioni volume" msgid "Translate" -msgstr "Traduci" +msgstr "Trasla" msgid "Group Operations" msgstr "Operazioni Gruppo" -msgid "Set Position" -msgstr "Imposta posizione" - msgid "Set Orientation" msgstr "Imposta orientamento" @@ -253,24 +393,33 @@ msgstr "Ripristina posizione" msgid "Reset Rotation" msgstr "Reimposta rotazione" -msgid "World coordinates" -msgstr "Coordinate reali" - msgid "Object coordinates" msgstr "Coordinate oggetto" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Coordinate reali" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Reimposta la rotazione corrente al valore di apertura dello strumento." + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Dimensioni" -msgid "%" -msgstr "%" - msgid "uniform scale" -msgstr "Scala uniforme" +msgstr "scala uniforme" msgid "Planar" msgstr "Planare" @@ -291,7 +440,7 @@ msgid "Dowel" msgstr "Tassello" msgid "Snap" -msgstr "Snap" +msgstr "Istantanea" msgid "Prism" msgstr "Prisma" @@ -332,6 +481,12 @@ msgstr "Forma" msgid "Depth" msgstr "Profondità" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotazione" + msgid "Groove" msgstr "Scanalatura" @@ -386,7 +541,7 @@ msgid "Draw cut line" msgstr "Disegna linea di taglio" msgid "Left click" -msgstr "Click sinistro" +msgstr "Clic sinistro" msgid "Add connector" msgstr "Aggiungi connettore" @@ -433,9 +588,6 @@ msgstr "Proporzione di spazio in relazione al raggio" msgid "Confirm connectors" msgstr "Conferma connettori" -msgid "Cancel" -msgstr "Annulla" - msgid "Build Volume" msgstr "Volume di stampa" @@ -486,7 +638,7 @@ msgid "After cut" msgstr "Dopo il taglio" msgid "Cut to parts" -msgstr "Taglia le parti" +msgstr "Taglia in parti" msgid "Perform cut" msgstr "Effettua taglio" @@ -529,7 +681,7 @@ msgstr "Taglio per piano" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"Gli spigoli non-manifold sono causati dallo strumento Taglia, vuoi risolvere " +"lo strumento Taglia ha generato geometrie con spessore zero, vuoi risolvere " "il problema ora?" msgid "Repairing model object" @@ -542,7 +694,7 @@ msgid "Delete connector" msgstr "Cancella connettore" msgid "Mesh name" -msgstr "Nome mesh" +msgstr "Nome maglia poligonale" msgid "Detail level" msgstr "Livello di dettaglio" @@ -555,8 +707,8 @@ msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to simplify the model." msgstr "" -"Lo slicing del modello \"%1%\" con più di 1 milione di triangoli potrebbe " -"essere lento. Si consiglia di semplificare il modello." +"L'elaborazione di un modello \"%1%\" con più di 1 milione di triangoli " +"potrebbe essere lento. Si consiglia di semplificare il modello." msgid "Simplify model" msgstr "Semplifica modello" @@ -592,69 +744,61 @@ msgid "%d triangles" msgstr "%d triangoli" msgid "Show wireframe" -msgstr "Mostra wireframe" +msgstr "Mostra modello reticolato" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Non si può applicare durante la creazione dell'anteprima." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operazione già annullata. Si prega di attendere qualche secondo." msgid "Face recognition" -msgstr "Riconoscimento facciale" +msgstr "Riconoscimento faccia" msgid "Perform Recognition" msgstr "Esegui riconoscimento" -msgid "Brush size" -msgstr "Misura del pennello" - -msgid "Brush shape" -msgstr "Forma del pennello" - msgid "Enforce seam" -msgstr "Forza la giunzione" +msgstr "Rinforza cucitura" msgid "Block seam" -msgstr "Blocca giunzione" +msgstr "Blocca cucitura" msgid "Seam painting" -msgstr "Pittura giunzione" +msgstr "Dipingi cucitura" msgid "Remove selection" msgstr "Rimuovi selezione" msgid "Entering Seam painting" -msgstr "Apertura Pittura Giunzione" +msgstr "Apertura dello strumento Dipingi cucitura" msgid "Leaving Seam painting" -msgstr "Chiusura Pittura Giunzione" +msgstr "Chiusura dello strumento Dipingi cucitura" msgid "Paint-on seam editing" -msgstr "Modifica Pittura Giunzione" +msgstr "Modifica cuciture dipinte" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" -msgstr "Font" +msgstr "Carattere" msgid "Thickness" msgstr "Spessore" msgid "Text Gap" -msgstr "Gap testo" +msgstr "Spaziatura" msgid "Angle" msgstr "Angolo" msgid "" -"Embeded\n" +"Embedded\n" "depth" -msgstr "Profondità integrata" +msgstr "" +"Profondità\n" +"integrata" msgid "Input text" msgstr "Inserisci testo" @@ -665,8 +809,8 @@ msgstr "Superficie" msgid "Horizontal text" msgstr "Testo orizzontale" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Sposta il mouse verso l'alto o il basso" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Ruota testo" @@ -680,7 +824,7 @@ msgstr "Ruota testo" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "Spostamento del testo" +msgstr "Spostamento testo" msgid "Set Mirror" msgstr "Imposta specchio" @@ -689,10 +833,10 @@ msgid "Embossed text" msgstr "Testo in rilievo" msgid "Enter emboss gizmo" -msgstr "Apri gizmo rilievo" +msgstr "Apri lo strumento rilievo" msgid "Leave emboss gizmo" -msgstr "Chiudi gizmo rilievo" +msgstr "Chiudi lo strumento rilievo" msgid "Embossing actions" msgstr "Azioni di rilievo" @@ -716,10 +860,10 @@ msgid "MODERN" msgstr "MODERNO" msgid "First font" -msgstr "Primo font" +msgstr "Primo carattere" msgid "Default font" -msgstr "Font predefinito" +msgstr "Carattere predefinito" msgid "Advanced" msgstr "Avanzate" @@ -728,16 +872,15 @@ msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." msgstr "" -"Il testo non può essere scritto con il font selezionato. Provare a scegliere " -"un altro font." +"Il testo non può essere scritto con il tipo di carattere selezionato. " +"Provare a scegliere un altro font." msgid "Embossed text cannot contain only white spaces." msgstr "Il testo in rilievo non può contenere solo spazi vuoti." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "" -"Il testo contiene un glifo di carattere (rappresentato da '?') sconosciuto " -"dal font." +"Il testo contiene un glifo di carattere (rappresentato da '?') sconosciuto." msgid "Text input doesn't show font skew." msgstr "L'immissione di testo non mostra l'inclinazione dei caratteri." @@ -750,12 +893,12 @@ msgstr "L'inserimento del testo non mostra lo spazio tra le righe." msgid "Too tall, diminished font height inside text input." msgstr "" -"Altezza del carattere troppo alta e ridotta all'interno dell'input di testo." +"Carattere troppo alto. Riduzione altezza all'interno dell'area di immissione." msgid "Too small, enlarged font height inside text input." msgstr "" -"Altezza del carattere troppo piccola e ingrandita all'interno dell'input di " -"testo." +"Carattere troppo piccolo. Aumento altezza all'interno dell'area di " +"immissione." msgid "Text doesn't show current horizontal alignment." msgstr "Il testo non mostra l'allineamento orizzontale corrente." @@ -765,7 +908,7 @@ msgstr "Ripristina modifiche al carattere." #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "Il font \"%1%\" non può essere selezionato." +msgstr "Il carattere \"%1%\" non può essere selezionato." msgid "Operation" msgstr "Operazione" @@ -797,8 +940,8 @@ msgid "Change Text Type" msgstr "Cambia tipo di testo" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "Rinomina lo stile(%1%) per il testo in rilievo:" +msgid "Rename style (%1%) for embossing text" +msgstr "Rinominare stile(%1%) per il testo in rilievo" msgid "Name can't be empty." msgstr "Il nome non può essere vuoto." @@ -835,7 +978,7 @@ msgid "Save as new style" msgstr "Salva come nuovo stile" msgid "Only valid font can be added to style." -msgstr "Solo i font validi possono essere aggiunti allo stile." +msgstr "Solo i tipo di caratteri validi possono essere aggiunti allo stile." msgid "Add style to my list." msgstr "Aggiungi lo stile alla mia lista." @@ -879,8 +1022,8 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" -"Se si cambia lo stile in \"%1%\", la modifica dello stile attuale verrà " -"eliminata.\n" +"Cambiando lo stile in \"%1%\", la modifica dello stile attuale verrà " +"ignorata.\n" "\n" "Vuoi continuare comunque?" @@ -892,13 +1035,13 @@ msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "Lo stile \"%1%\" non può essere usato e sarà rimosso dall'elenco." msgid "Unset italic" -msgstr "Corsivo non impostato" +msgstr "Rimuovi corsivo" msgid "Set italic" msgstr "Imposta corsivo" msgid "Unset bold" -msgstr "Grassetto non impostato" +msgstr "Rimuovi grassetto" msgid "Set bold" msgstr "Imposta grassetto" @@ -913,14 +1056,15 @@ msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" -"Le opzioni avanzate non possono essere modificate per il font selezionato.\n" -"Selezionare un altro font." +"Le opzioni avanzate non possono essere modificate per il tipo di carattere " +"selezionato.\n" +"Selezionare un altro tipo di carattere." msgid "Revert using of model surface." msgstr "Ripristina usando la superficie del modello." msgid "Revert Transformation per glyph." -msgstr "Invertire la trasformazione per glifo." +msgstr "Ripristina Trasformazione per glifo." msgid "Set global orientation for whole text." msgstr "Imposta l'orientamento globale per tutto il testo." @@ -953,46 +1097,46 @@ msgid "Bottom" msgstr "Inferiore" msgid "Revert alignment." -msgstr "Ripristinare l'allineamento." +msgstr "Reimposta l'allineamento." #. TRN EmbossGizmo: font units msgid "points" msgstr "punti" msgid "Revert gap between characters" -msgstr "Ripristina distanza tra i caratteri" +msgstr "Reimposta distanza tra i caratteri" msgid "Distance between characters" msgstr "Distanza tra i caratteri" msgid "Revert gap between lines" -msgstr "Ripristina distanza tra le linee" +msgstr "Reimposta distanza tra le linee" msgid "Distance between lines" msgstr "Distanza tra le linee" msgid "Undo boldness" -msgstr "Annulla grassetto" +msgstr "Reimposta spessore" msgid "Tiny / Wide glyphs" msgstr "Glifi piccoli / larghi" msgid "Undo letter's skew" -msgstr "Annulla l'inclinazione della lettera" +msgstr "Reimposta l'inclinazione della lettera" msgid "Italic strength ratio" msgstr "Fattore intensità corsivo" msgid "Undo translation" -msgstr "Annulla traduzione" +msgstr "Reimposta traslazione" msgid "Distance of the center of the text to the model surface." msgstr "Distanza del centro del testo dalla superficie del modello." msgid "Undo rotation" -msgstr "Annulla rotazione" +msgstr "Reimposta rotazione" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Ruota il testo in senso orario." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1015,13 +1159,19 @@ msgid "Orient the text towards the camera." msgstr "Orienta il testo verso di te." #, boost-format -msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +msgid "Font \"%1%\" can't be used. Please select another." msgstr "" -"Non è possibile caricare esattamente lo stesso font(\"%1%\"). L'applicazione " -"ne ha selezionato uno simile(\"%2%\"). È necessario specificare il font per " -"abilitare la modifica del testo." +"Il tipo di carattere \"%1%\" non può essere utilizzato. Si prega di " +"selezionarne un altro." + +#, boost-format +msgid "" +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." +msgstr "" +"Non è possibile caricare esattamente lo stesso tipo di carattere(\"%1%\"). " +"L'applicazione ne ha selezionato uno simile(\"%2%\"). È necessario " +"specificare il tipo di carattere per abilitare la modifica del testo." msgid "No symbol" msgstr "Nessun simbolo" @@ -1099,10 +1249,10 @@ msgid "SVG move" msgstr "Muovi SVG" msgid "Enter SVG gizmo" -msgstr "Apri gizmo SVG" +msgstr "Apri strumento SVG" msgid "Leave SVG gizmo" -msgstr "Chiudi gizmo SVG" +msgstr "Chiudi strumento SVG" msgid "SVG actions" msgstr "Azioni SVG" @@ -1133,13 +1283,13 @@ msgstr "Apri il percorso compilato" msgid "Undefined stroke type" msgstr "Tipo di tratto non definito" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" "Il percorso non può essere risolto con l'auto-intersezione e i punti " "multipli." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "La forma finale contiene un'auto-intersezione o più punti con le stesse " @@ -1149,7 +1299,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "La forma è segnata come invisibile (%1%)" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1183,7 +1333,8 @@ msgstr "Ricarica il file SVG dal disco." msgid "Change file" msgstr "Cambia file" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Passa a un altro file .svg" msgid "Forget the file path" @@ -1194,7 +1345,7 @@ msgid "" "Also disables 'reload from disk' option." msgstr "" "NON salvare il percorso locale del file 3MF.\n" -"Disattiva anche l'opzione \"ricarica da disco\"." +"Disabilita anche l'opzione 'ricarica da disco'." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" @@ -1210,7 +1361,7 @@ msgstr "Salva come" msgid "Save SVG file" msgstr "Salva file SVG" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "Salva come file '.svg" msgid "Size in emboss direction." @@ -1280,7 +1431,10 @@ msgstr "Il parser Nano SVG non può essere caricato dal file (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "Il file SVG NON contiene un percorso singolo da incidere (%1%)." +msgstr "Il file SVG NON ​​contiene alcun percorso per il rilievo (%1%)." + +msgid "No feature" +msgstr "Nessun elemento" msgid "Vertex" msgstr "Vertice" @@ -1306,11 +1460,8 @@ msgstr "Centro del bordo" msgid "Center of circle" msgstr "Centro della circonferenza" -msgid "ShiftLeft mouse button" -msgstr "MaiuscTasto sinistro del mouse" - msgid "Select feature" -msgstr "Seleziona caratteristica" +msgstr "Seleziona elemento" msgid "Select point" msgstr "Seleziona punto" @@ -1324,18 +1475,24 @@ msgstr "Riavvio della selezione" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Deseleziona" +msgid "Cancel a feature until exit" +msgstr "Annulla un elemento fino all'uscita" msgid "Measure" msgstr "Misura" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Si prega di confermare il rapporto di esplosione = 1 e di selezionare almeno " +"un oggetto." + msgid "Edit to scale" msgstr "Modifica in scala" msgctxt "Verb" -msgid "Scale" -msgstr "Ridimensiona" +msgid "Scale all" +msgstr "Scala tutto" msgid "None" msgstr "Nessuno" @@ -1349,6 +1506,48 @@ msgstr "Lunghezza" msgid "Selection" msgstr "Selezione" +msgid " (Moving)" +msgstr " (In movimento)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Seleziona 2 facce sugli oggetti e \n" +" fai combaciare gli oggetti." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Seleziona 2 punti o cerchi sugli oggetti e \n" +" specifica la distanza tra loro." + +msgid "Face" +msgstr "Faccia" + +msgid " (Fixed)" +msgstr " (Risolto)" + +msgid "Point" +msgstr "Punto" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"L'elemento 1 è stato ripristinato, \n" +"l'elemento 2 è stato l'elemento 1" + +msgid "Warning: please select Plane's feature." +msgstr "Attenzione: selezionare l'elemento del Piano." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Attenzione: selezionare l'elemento del Punto o del Cerchio." + +msgid "Warning: please select two different meshes." +msgstr "Attenzione: selezionare due maglie poligonali diverse." + msgid "Copy to clipboard" msgstr "Copia negli appunti" @@ -1364,8 +1563,26 @@ msgstr "Distanza diretta" msgid "Distance XYZ" msgstr "Distanza XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Parallelo" + +msgid "Center coincidence" +msgstr "Coincidenza centrale" + +msgid "Feature 1" +msgstr "Funzione 1" + +msgid "Reverse rotation" +msgstr "Rotazione inversa" + +msgid "Rotate around center:" +msgstr "Ruota attorno al centro:" + +msgid "Parallel distance:" +msgstr "Distanza parallela:" + +msgid "Flip by Face 2" +msgstr "Capovolgi da Faccia 2" msgid "Notice" msgstr "Avvertenza" @@ -1406,12 +1623,15 @@ msgstr "" "Il file di configurazione \"%1%\" è stato caricato, ma alcuni valori non " "sono stati riconosciuti." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Basato su PrusaSlicer e BambuStudio" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" -"Snapmaker Orca ha esaurito la memoria e verrà chiuso. Questo potrebbe essere \n" -"un bug. Segnala questo errore al supporto tecnico." +"Snapmaker Orca ha esaurito la memoria e verrà chiuso. Questo potrebbe essere un " +"bug. Si prega di segnalare questo errore al supporto tecnico." msgid "Fatal error" msgstr "Errore irreversibile" @@ -1420,7 +1640,8 @@ msgid "" "Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" -"Si è verificato un errore nella localizzazione e Snapmaker Orca verrà chiuso." +"Si è verificato un errore nella localizzazione e Snapmaker Orca verrà chiuso. Si " +"prega di segnalare questo errore al supporto tecnico." msgid "Critical error" msgstr "Errore critico" @@ -1433,10 +1654,11 @@ msgid "Untitled" msgstr "Senza titolo" msgid "Downloading Bambu Network Plug-in" -msgstr "Scaricando il plug-in Bambu Network" +msgstr "Scaricamento del modulo Bambu Network" msgid "Login information expired. Please login again." -msgstr "Le informazioni di login sono scadute. Effettua nuovamente il login." +msgstr "" +"Le informazioni di accesso sono scadute. Effettua nuovamente l'accesso." msgid "Incorrect password" msgstr "Password errata" @@ -1457,6 +1679,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1482,7 +1708,7 @@ msgid "This is the newest version." msgstr "Hai la versione più recente." msgid "Info" -msgstr "Info" +msgstr "Informazioni" msgid "" "The Snapmaker Orca configuration file may be corrupted and cannot be parsed.\n" @@ -1505,63 +1731,64 @@ msgstr "Caricamento dei preset correnti" msgid "Loading a mode view" msgstr "Caricamento di una modalità di visualizzazione" -msgid "Choose one file (3mf):" -msgstr "Scegli file (3mf):" +msgid "Choose one file (3MF):" +msgstr "Scegli file (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Scegli uno o più file (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Scegli uno o più file (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Scegli uno o più file (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Scegli uno o più file (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Seleziona il file ZIP" -msgid "Choose one file (gcode/3mf):" -msgstr "Scegli file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Scegli file (GCODE/3MF):" msgid "Some presets are modified." msgstr "Alcuni preset vengono modificati." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"È possibile conservare i preset modificati per il nuovo progetto, eliminarli " -"o salvare le modifiche come nuovi preset." +"È possibile conservare i profili modificati per il nuovo progetto, scartarli " +"o salvare le modifiche come nuovi profili." msgid "User logged out" msgstr "Utente disconnesso" msgid "new or open project file is not allowed during the slicing process!" -msgstr "non è consentito aprire un nuovo file progetto durante lo slicing!" +msgstr "" +"non è consentito creare o aprire un file di progetto durante il processo di " +"elaborazione!" msgid "Open Project" msgstr "Apri Progetto" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" -"La versione Snapmaker Orca è obsoleta, devi aggiornarla all'ultima versione \n" -"prima di poterla utilizzare normalmente" +"La versione di Snapmaker Orca è obsoleta. Devi aggiornarla all'ultima versione " +"prima di poter utilizzare normalmente il programma." msgid "Privacy Policy Update" -msgstr "Aggiornamento dell'informativa sulla privacy" +msgstr "Aggiornamento dell'informativa sulla riservatezza" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"Il numero di impostazioni utente memorizzate nella cache cloud ha superato " -"il limite massimo. Le nuove impostazioni utente create possono essere " -"utilizzate solo in locale." +"Il numero di profili utente memorizzati nel cloud ha superato il limite " +"massimo. I nuovi profili utente possono essere utilizzati solo in locale." msgid "Sync user presets" -msgstr "Sincronizzare le preset dell'utente" +msgstr "Sincronizza profili utente" msgid "Loading user preset" -msgstr "Caricamento del preset utente" +msgstr "Caricamento profili utente" msgid "Switching application language" msgstr "Cambio lingua applicazione" @@ -1579,13 +1806,13 @@ msgid "The uploads are still ongoing" msgstr "I caricamenti sono ancora in corso" msgid "Stop them and continue anyway?" -msgstr "Ferma e continua comunque?" +msgstr "Fermarli e continuare comunque?" msgid "Ongoing uploads" msgstr "Caricamenti in corso" msgid "Select a G-code file:" -msgstr "Seleziona file G-code:" +msgstr "Seleziona un file G-code:" msgid "" "Could not start URL download. Destination folder is not set. Please choose " @@ -1614,7 +1841,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Inizializzazione della GUI di Snapmaker Orca non riuscita" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Errore irreversibile, eccezione: %1%" msgid "Quality" @@ -1644,17 +1871,23 @@ msgstr "Strati solidi superiori" msgid "Top Minimum Shell Thickness" msgstr "Spessore minimo del guscio superiore" +msgid "Top Surface Density" +msgstr "Densità superficie superiore" + msgid "Bottom Solid Layers" -msgstr "Layer solidi inferiori" +msgstr "Strati solidi inferiori" msgid "Bottom Minimum Shell Thickness" msgstr "Spessore minimo del guscio inferiore" +msgid "Bottom Surface Density" +msgstr "Densità superficie inferiore" + msgid "Ironing" msgstr "Stiratura" msgid "Fuzzy Skin" -msgstr "Superficie Crespa" +msgstr "Superficie ruvida" msgid "Extruders" msgstr "Estrusori" @@ -1663,10 +1896,10 @@ msgid "Extrusion Width" msgstr "Larghezza Estrusione" msgid "Wipe options" -msgstr "Opzioni pulitura" +msgstr "Opzioni spurgo" msgid "Bed adhesion" -msgstr "Adesione al piano" +msgstr "Adesione al piatto" msgid "Add part" msgstr "Aggiungi parte" @@ -1678,10 +1911,10 @@ msgid "Add modifier" msgstr "Aggiungi modificatore" msgid "Add support blocker" -msgstr "Aggiungi blocco supporto" +msgstr "Aggiungi divieto di supporto" msgid "Add support enforcer" -msgstr "Aggiungi rinforzo supporto" +msgstr "Aggiungi supporto di rinforzo" msgid "Add text" msgstr "Aggiungi testo" @@ -1711,11 +1944,14 @@ msgid "Show" msgstr "Mostra" msgid "Del" -msgstr "Del" +msgstr "Elimina" msgid "Delete the selected object" msgstr "Elimina l'oggetto selezionato" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Caricamento..." @@ -1735,26 +1971,29 @@ msgid "Torus" msgstr "Toroide" msgid "Orca Cube" -msgstr "Orca Cube" +msgstr "Cubo di Orca" + +msgid "Orca Tolerance Test" +msgstr "Test di tolleranza di Snapmaker Orca" msgid "3DBenchy" msgstr "3DBenchy" msgid "Autodesk FDM Test" -msgstr "Autodesk FDM Test" +msgstr "Prova FDM di Autodesk" msgid "Voron Cube" -msgstr "Voron Cube" +msgstr "Cubo di Voron" msgid "Stanford Bunny" msgstr "Coniglietto di Stanford" msgid "Orca String Hell" -msgstr "Orca String Hell" +msgstr "Prova del filo Orca String Hell" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1797,10 +2036,10 @@ msgid "Fix model" msgstr "Correggi il modello" msgid "Export as one STL" -msgstr "Esporta come un unico STL" +msgstr "Esporta come STL unico" msgid "Export as STLs" -msgstr "Esportazione come STL" +msgstr "Esporta come STL multipli" msgid "Reload from disk" msgstr "Ricarica da disco" @@ -1814,6 +2053,12 @@ msgstr "Sostituisci con STL" msgid "Replace the selected part with new STL" msgstr "Sostituisci la parte selezionata con un nuovo STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Cambia filamento" @@ -1828,7 +2073,7 @@ msgid "Filament %d" msgstr "Filamento %d" msgid "current" -msgstr "Attuale" +msgstr "attuale" msgid "Scale to build volume" msgstr "Scala per creare volume" @@ -1840,7 +2085,7 @@ msgid "Flush Options" msgstr "Opzioni spurgo" msgid "Flush into objects' infill" -msgstr "Spurga nel riempimento oggetto" +msgstr "Spurga nel riempimento dell'oggetto" msgid "Flush into this object" msgstr "Spurga in questo oggetto" @@ -1851,16 +2096,16 @@ msgstr "Spurga nei supporti dell'oggetto" msgid "Edit in Parameter Table" msgstr "Modifica nella tabella dei parametri" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Converti da pollici" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Ripristina in pollici" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Converti da metri" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Ripristina in metri" msgid "Assemble" @@ -1873,19 +2118,20 @@ msgid "Assemble the selected objects to an object with single part" msgstr "Assembla gli oggetti selezionati in un oggetto con una singola parte" msgid "Mesh boolean" -msgstr "Mesh booleana" +msgstr "Operazioni booleane maglie" msgid "Mesh boolean operations including union and subtraction" -msgstr "Operazioni booleane di mesh, tra cui l'unione e la sottrazione" +msgstr "" +"Operazioni booleane di maglie poligonali, tra cui l'unione e la sottrazione" msgid "Along X axis" -msgstr "Lungo asse X" +msgstr "Lungo l'asse X" msgid "Mirror along the X axis" msgstr "Specchia lungo l'asse X" msgid "Along Y axis" -msgstr "Lungo asse Y" +msgstr "Lungo l'asse Y" msgid "Mirror along the Y axis" msgstr "Specchia lungo l'asse Y" @@ -1915,10 +2161,10 @@ msgid "Invalidate cut info" msgstr "Annulla informazioni di taglio" msgid "Add Primitive" -msgstr "Aggiungi primitiva" +msgstr "Aggiungi Primitiva" msgid "Add Handy models" -msgstr "Aggiungi modelli Handy" +msgstr "Aggiungi modelli utili" msgid "Add Models" msgstr "Aggiungi modelli" @@ -1947,38 +2193,47 @@ msgstr "Dividi l'oggetto selezionato" msgid "Auto orientation" msgstr "Orientamento automatico" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Orienta automaticamente l'oggetto per migliorare la qualità di stampa." +msgid "Edit" +msgstr "Modifica" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Seleziona tutto" msgid "select all objects on current plate" -msgstr "Seleziona tutti gli oggetti sul piatto corrente" +msgstr "seleziona tutti gli oggetti sul piatto corrente" msgid "Delete All" msgstr "Elimina tutto" msgid "delete all objects on current plate" -msgstr "Elimina tutti gli oggetti sul piatto corrente" +msgstr "elimina tutti gli oggetti sul piatto corrente" msgid "Arrange" msgstr "Disponi" msgid "arrange current plate" -msgstr "Disponi sul piatto corrente" +msgstr "disponi sul piatto corrente" msgid "Reload All" -msgstr "" +msgstr "Ricarica tutto" msgid "reload all from disk" -msgstr "" +msgstr "ricarica tutto dal disco" msgid "Auto Rotate" msgstr "Rotazione automatica" msgid "auto rotate current plate" -msgstr "Rotazione automatica piatto corrente" +msgstr "rotazione automatica piatto corrente" msgid "Delete Plate" msgstr "Elimina piatto" @@ -1986,6 +2241,30 @@ msgstr "Elimina piatto" msgid "Remove the selected plate" msgstr "Rimuovi il piatto selezionato" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Clona" @@ -1995,9 +2274,18 @@ msgstr "Semplifica Modello" msgid "Center" msgstr "Centro" +msgid "Drop" +msgstr "Lascia" + msgid "Edit Process Settings" msgstr "Modifica le impostazioni del processo" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Modifica i parametri di stampa per singolo oggetto" @@ -2014,7 +2302,7 @@ msgid "Lock" msgstr "Blocca" msgid "Edit Plate Name" -msgstr "Modifica nome Piatto" +msgstr "Modifica nome piatto" msgid "Name" msgstr "Nome" @@ -2025,14 +2313,14 @@ msgstr "Fila." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" -msgstr[0] "%1$d Errore riparato" -msgstr[1] "%1$d errors repaired" +msgstr[0] "%1$d errore riparato" +msgstr[1] "%1$d errori riparati" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "Errore: %1$d spigolo non-manifold." -msgstr[1] "Errore: %1$d spigoli non-manifold." +msgstr[0] "Errore: %1$d geometria con spessore zero." +msgstr[1] "Errore: %1$d geometrie con spessore zero." msgid "Remaining errors" msgstr "Errori rimanenti" @@ -2040,13 +2328,11 @@ msgstr "Errori rimanenti" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d spigolo non-manifold" -msgstr[1] "%1$d spigoli non-manifold" +msgstr[0] "%1$d geometria con spessore zero" +msgstr[1] "%1$d geometrie con spessore zero" -msgid "Right click the icon to fix model object" -msgstr "" -"Fai clic con il pulsante destro del mouse sull'icona per correggere " -"l'oggetto del modello" +msgid "Click the icon to repair model object" +msgstr "Clicca sull'icona per riparare l'oggetto" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2059,7 +2345,7 @@ msgstr "Clicca sull'icona per ripristinare tutte le impostazioni dell'oggetto" msgid "Right button click the icon to drop the object printable property" msgstr "" "Fai clic con pulsante destro del mouse sull'icona per eliminare le proprietà " -"stampa dell'oggetto" +"di stampa dell'oggetto" msgid "Click the icon to toggle printable property of the object" msgstr "" @@ -2073,7 +2359,7 @@ msgid "Click the icon to edit color painting of the object" msgstr "Clicca sull'icona per modificare i colori dell'oggetto" msgid "Click the icon to shift this object to the bed" -msgstr "Fare clic sull'icona per spostare l'oggetto sul piano" +msgstr "Fare clic sull'icona per spostare l'oggetto sul piatto" msgid "Loading file" msgstr "Caricamento file" @@ -2102,6 +2388,9 @@ msgstr "" "Passa alla modalità di impostazione oggetto per modificare le impostazioni " "di processo degli oggetti selezionati." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Elimina il connettore dall'oggetto che fa parte del taglio" @@ -2120,10 +2409,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Questa azione interromperà una corrispondenza di taglio.\n" "In seguito, la coerenza del modello non può essere garantita.\n" @@ -2137,9 +2426,9 @@ msgstr "Elimina tutti i connettori" msgid "Deleting the last solid part is not allowed." msgstr "Non è consentita l'eliminazione dell'ultima parte solida." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "" -"L'oggetto di destinazione contiene solo una parte e non può essere diviso." +"L'oggetto di destinazione contiene solo una parte e non può essere suddiviso." msgid "Assembly" msgstr "Assemblaggio" @@ -2160,7 +2449,7 @@ msgid "Part Settings to modify" msgstr "Imposta parti da modificare" msgid "Layer range Settings to modify" -msgstr "Impostazioni range layer da modificare" +msgstr "Impostazioni intervallo strati da modificare" msgid "Part manipulation" msgstr "Manipola parti" @@ -2175,20 +2464,20 @@ msgid "Settings for height range" msgstr "Impostazioni intervallo altezza" msgid "Layer" -msgstr "Layer" +msgstr "Strato" msgid "Selection conflicts" msgstr "Conflitti di selezione" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Se il primo elemento selezionato è un oggetto, anche il secondo deve essere " "un oggetto." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Se il primo elemento selezionato è una parte, il secondo deve far parte " "dello stesso oggetto." @@ -2204,7 +2493,7 @@ msgid "Support Blocker" msgstr "Blocco Supporto" msgid "Support Enforcer" -msgstr "Rinforzo Supporto" +msgstr "Supporto di rinforzo" msgid "Type:" msgstr "Tipo:" @@ -2220,19 +2509,19 @@ msgstr "Rinomina" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "Il seguente oggetto del modello è stato riparato" -msgstr[1] "I seguenti oggetti del modello sono stati riparati" +msgstr[0] "Il seguente modello di oggetto è stato riparato" +msgstr[1] "I seguenti modelli di oggetti sono stati riparati" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "Impossibile riparare il seguente oggetto modello" -msgstr[1] "Impossibile riparare i seguenti oggetti modello" +msgstr[0] "Impossibile riparare il seguente modello di oggetto" +msgstr[1] "Impossibile riparare i seguenti modelli di oggetti" msgid "Repairing was canceled" msgstr "La riparazione è stata annullata" msgid "Additional process preset" -msgstr "Preset processo aggiuntivo" +msgstr "Profilo processo aggiuntivo" msgid "Remove parameter" msgstr "Rimuovi parametro" @@ -2251,40 +2540,43 @@ msgstr "Numero non valido." msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" -"Una cella può essere copiata solo in una o più celle della stessa colonna." +"una cella può essere copiata solo in una o più celle della stessa colonna" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "Copia di celle multiple non supportata." msgid "Outside" msgstr "Esterno" msgid "Layer height" -msgstr "Altezza layer" +msgstr "Altezza strato" msgid "Wall loops" -msgstr "Loop pareti" +msgstr "Perimetri di stampa" msgid "Infill density(%)" msgstr "Densità riempimento (%)" msgid "Auto Brim" -msgstr "Auto Brim" +msgstr "Tesa automatica" msgid "Mouse ear" msgstr "Orecchio di topo" +msgid "Painted" +msgstr "Dipinto" + msgid "Outer brim only" -msgstr "Solo brim esterno" +msgstr "Solo tesa esterna" msgid "Inner brim only" -msgstr "Solo brim interno" +msgstr "Solo tesa interna" msgid "Outer and inner brim" -msgstr "Brim interno e esterno" +msgstr "Tesa interna ed esterna" msgid "No-brim" -msgstr "No-brim" +msgstr "Senza tesa" msgid "Outer wall speed" msgstr "Velocità parete esterna" @@ -2293,7 +2585,7 @@ msgid "Plate" msgstr "Piatto" msgid "Brim" -msgstr "Brim" +msgstr "Tesa" msgid "Object/Part Setting" msgstr "Impostazione oggetto/parte" @@ -2335,7 +2627,7 @@ msgid "Pause:" msgstr "Pausa:" msgid "Custom Template:" -msgstr "Template personalizzato:" +msgstr "Modello personalizzato:" msgid "Custom G-code:" msgstr "G-code personalizzato:" @@ -2344,44 +2636,44 @@ msgid "Custom G-code" msgstr "G-code personalizzato" msgid "Enter Custom G-code used on current layer:" -msgstr "Inserisci G-code personalizzato utilizzato nel layer corrente:" +msgstr "Inserisci G-code personalizzato utilizzato nello strato corrente:" msgid "Jump to Layer" -msgstr "Vai al layer" +msgstr "Vai allo strato" msgid "Please enter the layer number" -msgstr "Inserisci numero del layer" +msgstr "Inserisci numero dello strato" msgid "Add Pause" msgstr "Aggiungi pausa" msgid "Insert a pause command at the beginning of this layer." -msgstr "Inserisci un comando di pausa all'inizio di questo layer." +msgstr "Inserisci un comando di pausa all'inizio di questo strato." msgid "Add Custom G-code" msgstr "Aggiungi G-code personalizzato" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Inserisci G-code personalizzato all'inizio di questo layer." +msgstr "Inserisci G-code personalizzato all'inizio di questo strato." msgid "Add Custom Template" -msgstr "Aggiungi template personalizzato" +msgstr "Aggiungi modello personalizzato" msgid "Insert template custom G-code at the beginning of this layer." msgstr "" -"Inserisci un template G-code personalizzato all'inizio di questo layer." +"Inserisci un modello G-code personalizzato all'inizio di questo strato." msgid "Filament " msgstr "Filamento " msgid "Change filament at the beginning of this layer." -msgstr "Cambia filamento all'inizio di questo layer." +msgstr "Cambia filamento all'inizio di questo strato." msgid "Delete Pause" msgstr "Elimina pausa" msgid "Delete Custom Template" -msgstr "Elimina Template Personalizzato" +msgstr "Elimina modello personalizzato" msgid "Edit Custom G-code" msgstr "Modifica G-code personalizzato" @@ -2405,106 +2697,37 @@ msgid "Check the status of current system services" msgstr "Verifica lo stato attuale dei servizi di sistema" msgid "code" -msgstr "Codice" +msgstr "codice" msgid "Failed to connect to cloud service" msgstr "Connessione al servizio cloud non riuscita" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Fai clic sul link in alto per visualizzare lo stato del servizio cloud" +msgstr "" +"Fai clic sul collegamento in alto per visualizzare lo stato del servizio " +"cloud" msgid "Failed to connect to the printer" msgstr "Impossibile connettersi alla stampante" msgid "Connection to printer failed" -msgstr "Connessione stampante fallita" +msgstr "Connessione stampante non riuscita" msgid "Please check the network connection of the printer and Orca." -msgstr "Controlla la connessione di rete della stampante e di Studio." +msgstr "Controlla la connessione di rete della stampante e di Snapmaker Orca." msgid "Connecting..." msgstr "Connessione..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Vuoto" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Ricarica automatica" - -msgid "AMS not connected" -msgstr "AMS non collegato" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "Carica" msgid "Unload" msgstr "Scarica" -msgid "Ext Spool" -msgstr "Bobina esterna" - -msgid "Tips" -msgstr "Suggerimenti" - -msgid "Guide" -msgstr "Guida" - -msgid "Retry" -msgstr "Riprova" - -msgid "Calibrating AMS..." -msgstr "Calibrazione AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "" -"Si è verificato un problema durante la calibrazione. Clicca per visualizzare " -"la soluzione." - -msgid "Calibrate again" -msgstr "Calibra di nuovo" - -msgid "Cancel calibration" -msgstr "Annulla calibrazione" - -msgid "Idling..." -msgstr "Minimo..." - -msgid "Heat the nozzle" -msgstr "Riscaldo nozzle" - -msgid "Cut filament" -msgstr "Taglio il filamento" - -msgid "Pull back current filament" -msgstr "Ritiro il filamento corrente" - -msgid "Push new filament into extruder" -msgstr "Inserisco il nuovo filamento nell'estrusore" - -msgid "Purge old filament" -msgstr "Spurgo filamento precedente" - -msgid "Feed Filament" -msgstr "Alimentazione Filamento" - -msgid "Confirm extruded" -msgstr "Conferma estrusione" - -msgid "Check filament location" -msgstr "Controllare la posizione del filamento" - -msgid "Grab new filament" -msgstr "Prendo un nuovo filamento" - msgid "" "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " "load or unload filaments." @@ -2512,28 +2735,170 @@ msgstr "" "Scegliere uno slot AMS, quindi premi il pulsante \"Carica\" o \"Scarica\" " "per caricare o scaricare automaticamente il filamento." -msgid "Edit" -msgstr "Modifica" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtra" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Raffreddamento" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Dall'alto" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Ausiliario" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "In attesa..." + +msgid "Heat the nozzle" +msgstr "Riscaldare l'ugello" + +msgid "Cut filament" +msgstr "Tagliare il filamento" + +msgid "Pull back current filament" +msgstr "Ritirare il filamento corrente" + +msgid "Push new filament into extruder" +msgstr "Inserire il nuovo filamento nell'estrusore" + +msgid "Grab new filament" +msgstr "Prendere un nuovo filamento" + +msgid "Purge old filament" +msgstr "Spurgare il filamento precedente" + +msgid "Confirm extruded" +msgstr "Confermare l'estrusione" + +msgid "Check filament location" +msgstr "Controllare la posizione del filamento" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Tutti gli oggetti selezionati si trovano su una piatto bloccato.\n" "Non è possibile disporre automaticamente questi oggetti." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Non sono stati selezionati oggetti ordinabili." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Il piatto è bloccato.\n" "Non è possibile eseguire la disposizione automatica su questo piatto." msgid "Arranging..." -msgstr "Disponendo..." +msgstr "Disposizione..." msgid "Arranging" msgstr "Disposizione" @@ -2554,7 +2919,7 @@ msgid "" "Arrange failed. Found some exceptions when processing object geometries." msgstr "" "Disposizione fallita. Riscontrate eccezioni durante l'elaborazione delle " -"geometrie degli oggetti" +"geometrie degli oggetti." #, c-format, boost-format msgid "" @@ -2563,19 +2928,19 @@ msgid "" "%s" msgstr "" "La disposizione ha ignorato i seguenti oggetti che non possono entrare in un " -"singolo piano:\n" +"singolo piatto:\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Tutti gli oggetti selezionati si trovano su un piatto bloccato,\n" "Non è possibile orientare automaticamente questi oggetti." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Il piatto è bloccato.\n" "Non puoi orientare automaticamente questo piatto." @@ -2593,10 +2958,10 @@ msgid "Filling" msgstr "Riempimento" msgid "Bed filling canceled." -msgstr "Riempimento del piano annullato." +msgstr "Riempimento del piatto annullato." msgid "Bed filling done." -msgstr "Riempimento del piano completato." +msgstr "Riempimento del piatto completato." msgid "Searching for optimal orientation" msgstr "Ricerca orientamento ottimale" @@ -2611,10 +2976,10 @@ msgid "Logging in" msgstr "Accesso in corso" msgid "Login failed" -msgstr "Login non riuscito" +msgstr "Accesso non riuscito" msgid "Please check the printer network connection." -msgstr "Controlla la connessione rete della stampante." +msgstr "Controlla la connessione di rete della stampante." msgid "Abnormal print file data. Please slice again." msgstr "Dati anomali del file di stampa. Eseguire nuovamente l'elaborazione." @@ -2623,23 +2988,24 @@ msgid "Task canceled." msgstr "Attività annullata." msgid "Upload task timed out. Please check the network status and try again." -msgstr "Attività di Upload scaduto. Controlla lo stato della rete e riprova." +msgstr "" +"Attività di Caricamento scaduta. Controlla lo stato della rete e riprova." msgid "Cloud service connection failed. Please try again." msgstr "Connessione al servizio cloud non riuscita. Riprovare." -msgid "Print file not found. please slice again." -msgstr "File di stampa non trovato; si prega di eseguire nuovamente lo slice." +msgid "Print file not found. Please slice again." +msgstr "File di stampa non trovato; eseguire nuovamente l'elaborazione." msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"Il file di stampa supera la dimensione massima consentita (1 GB). Semplifica " -"il modello ed effettua di nuovo lo slice." +"Il file di stampa supera la dimensione massima consentita (1 GB). Si prega " +"di semplificare il modello ed effettuare di nuovo l'elaborazione." msgid "Failed to send the print job. Please try again." -msgstr "Impossibile inviare il lavoro di stampa. Riprova." +msgstr "Impossibile inviare l'attività di stampa. Riprova." msgid "Failed to upload file to ftp. Please try again." msgstr "Caricamento del file in ftp non riuscito. Riprova." @@ -2647,7 +3013,8 @@ msgstr "Caricamento del file in ftp non riuscito. Riprova." msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Controlla lo stato attuale del server Bambu Lab cliccando sul link qui sopra." +"Controlla lo stato attuale del server Bambu cliccando sul collegamento qui " +"sopra." msgid "" "The size of the print file is too large. Please adjust the file size and try " @@ -2656,9 +3023,10 @@ msgstr "" "La dimensione del file di stampa è troppo grande. Modifica la dimensione del " "file e riprova." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" -"File di stampa non trovato; elabora nuovamente il file e invia per la stampa." +"File di stampa non trovato; elabora nuovamente il file e invialo per la " +"stampa." msgid "" "Failed to upload print file to FTP. Please check the network status and try " @@ -2674,7 +3042,7 @@ msgid "Sending print job through cloud service" msgstr "Invia stampa tramite servizio cloud" msgid "Print task sending times out." -msgstr "Timeout dell'invio dell'attività di stampa." +msgstr "Invio dell'attività di stampa fallita." msgid "Service Unavailable" msgstr "Servizio non disponibile" @@ -2688,30 +3056,66 @@ msgstr "Invia configurazione di stampa" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "" -"Inviato con successo. Salta automaticamente alla pagina del dispositivo in %s" +"Inviato con successo. Passaggio automatico alla pagina del dispositivo in %s " +"s" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -"Inviato con successo. Salterà automaticamente alla pagina successiva in %ss" +"Inviato con successo. Passaggio automatico alla pagina successiva in %s s" -msgid "An SD card needs to be inserted before printing via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" msgstr "" -"È necessario inserire una scheda microSD prima di stampare tramite LAN." -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "Invio file G-code tramite LAN" -msgid "Sending gcode file to sdcard" -msgstr "Invia file G-code a scheda microSD" +msgid "Sending G-code file to SD card" +msgstr "Invio file G-code a scheda SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" -msgstr "Inviato con successo. Chiudi la pagina corrente in %s s" +msgstr "Inviato con successo. Chiusura della pagina corrente in %s s" -msgid "An SD card needs to be inserted before sending to printer." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." msgstr "" -"È necessario inserire una scheda microSD prima di inviarla alla stampante." msgid "Importing SLA archive" msgstr "Importa archivio SLA" @@ -2720,8 +3124,8 @@ msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"L'archivio SLA non contiene preset. Attivare alcuni preset di stampanti SLA " -"prima di importare l'archivio SLA." +"L'archivio SLA non contiene profili. Attivare alcuni profili di stampanti " +"SLA prima di importare l'archivio SLA." msgid "Importing canceled." msgstr "Importazione annullata." @@ -2733,7 +3137,7 @@ msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"L'archivio SLA importato non contiene alcun preset. Gli attuali preset SLA " +"L'archivio SLA importato non contiene alcun profilo. Gli attuali profili SLA " "sono stati utilizzati come recupero." msgid "You cannot load SLA project with a multi-part object on the bed" @@ -2742,22 +3146,22 @@ msgstr "" "parti sul piano" msgid "Please check your object list before preset changing." -msgstr "Controlla l'elenco oggetto prima di modificare il preset." +msgstr "Controlla l'elenco degli oggetti prima di modificare il profilo." msgid "Attention!" msgstr "Attenzione!" msgid "Downloading" -msgstr "Downloading" +msgstr "Scaricamento" msgid "Download failed" -msgstr "Download non riuscito" +msgstr "Scaricamento non riuscito" -msgid "Cancelled" +msgid "Canceled" msgstr "Annullato" -msgid "Install successfully." -msgstr "Installato con successo." +msgid "Installed successfully" +msgstr "Installato con successo" msgid "Installing" msgstr "Installazione" @@ -2766,10 +3170,10 @@ msgid "Install failed" msgstr "Installazione non riuscita" msgid "Portions copyright" -msgstr "Porzioni di copyright" +msgstr "Porzioni di diritto d'autore" msgid "Copyright" -msgstr "Copyright" +msgstr "Diritto d'autore" msgid "License" msgstr "Licenza" @@ -2780,8 +3184,8 @@ msgstr "Snapmaker Orca è concesso in licenza con " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, versione 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca è basato su PrusaSlicer e BambuStudio" msgid "Libraries" msgstr "Librerie" @@ -2790,16 +3194,13 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Questo software utilizza componenti open source il cui copyright e altri " -"diritti di proprietà appartengono ai rispettivi proprietari" +"Questo software utilizza componenti open source il cui diritto d'autore e " +"altri diritti di proprietà appartengono ai rispettivi proprietari" #, c-format, boost-format msgid "About %s" msgstr "Informazioni su %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca è basato su BambuStudio, PrusaSlicer e SuperSlicer." @@ -2828,15 +3229,12 @@ msgstr "Conferma" msgid "Close" msgstr "Chiudi" -msgid "Colour" -msgstr "Colore" - msgid "" "Nozzle\n" "Temperature" msgstr "" -"Temperatura\n" -"Nozzle" +"Ugello\n" +"Temperatura" msgid "max" msgstr "max" @@ -2846,21 +3244,16 @@ msgstr "min" #, boost-format msgid "The input value should be greater than %1% and less than %2%" -msgstr "Il valore di input deve essere maggiore di %1% e minore di %2%" +msgstr "Il valore immesso deve essere maggiore di %1% e minore di %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"L'impostazione informazioni sullo slot AMS in fase di stampa non è " -"supportata." - msgid "Factors of Flow Dynamics Calibration" msgstr "Fattori di calibrazione della dinamica del flusso" msgid "PA Profile" -msgstr "Profilo PA" +msgstr "Profilo AP" msgid "Factor K" msgstr "Fattore K" @@ -2868,10 +3261,15 @@ msgstr "Fattore K" msgid "Factor N" msgstr "Fattore N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"L'impostazione delle informazioni sullo slot AMS durante la stampa non è " +"supportata" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" -"Non è supportata l’impostazione informazioni dello Slot Virtuale durante la " -"stampa." +"L'impostazione delle informazioni sullo slot virtuale durante la stampa non " +"è supportata" msgid "Are you sure you want to clear the filament information?" msgstr "Sei sicuro di voler cancellare le informazioni del filamento?" @@ -2881,11 +3279,21 @@ msgstr "Devi prima selezionare il tipo e il colore del materiale." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "" +msgstr "Si prega di immettere un valore valido (K in %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +"Si prega di immettere un valore valido (K in %.1f~%.1f, N in %.1f~%.1f)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" msgid "Other Color" msgstr "Altro colore" @@ -2901,37 +3309,31 @@ msgid "" "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"La temperatura del nozzle e la velocità volumetrica massima influiranno sui " -"risultati della calibrazione. Inserisci gli stessi valori della stampa " -"effettiva. Possono essere riempiti automaticamente selezionando un filamento " -"dal preset." +"La temperatura dell'ugello e la velocità volumetrica massima influiranno sui " +"risultati della calibrazione. Si prega di inserire gli stessi valori usati " +"nella stampa. I valori possono essere inseriti automaticamente selezionando " +"un profilo di filamento." msgid "Nozzle Diameter" -msgstr "Diametro Nozzle" +msgstr "Diametro ugello" msgid "Bed Type" -msgstr "Tipo di piano" +msgstr "Tipo di piatto" msgid "Nozzle temperature" -msgstr "Temperatura Nozzle" +msgstr "Temperatura ugello" msgid "Bed Temperature" -msgstr "Temperatura piano" +msgstr "Temperatura Piatto" msgid "Max volumetric speed" -msgstr "Massima velocità volumetrica" - -msgid "℃" -msgstr "°C" +msgstr "Velocità volumetrica massima" msgid "Bed temperature" -msgstr "Temperatura piano" - -msgid "mm³" -msgstr "mm³" +msgstr "Temperatura piatto" msgid "Start calibration" -msgstr "Calibra" +msgstr "Avvia calibrazione" msgid "Next" msgstr "Avanti" @@ -2949,7 +3351,7 @@ msgid "Save" msgstr "Salva" msgid "Last Step" -msgstr "Indietro" +msgstr "Ultimo passo" msgid "Example" msgstr "Esempio" @@ -2969,16 +3371,81 @@ msgid "Dynamic flow Calibration" msgstr "Calibrazione dinamica del flusso" msgid "Step" -msgstr "Step" +msgstr "Passo" + +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" msgid "AMS Slots" msgstr "Slot AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Esterno" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Ugello" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Nota: sono selezionabili solo gli slot AMS caricati con lo stesso tipo di " -"materiale." msgid "Enable AMS" msgstr "Abilita AMS" @@ -2992,24 +3459,22 @@ msgstr "Disabilita AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Stampa filamento con bobina esterna" -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" +"Si prega di cambiare l'essiccante quando è troppo umido. L'indicatore " +"potrebbe non essere accurato nei seguenti casi: quando il coperchio è aperto " +"o si sostituisce la confezione dell'essiccante. Ci vogliono alcune ore " +"perché l'umidità venga assorbita. Le basse temperature rallentano il " +"processo." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" -"Configura lo slot AMS da usare per un filamento utilizzato nel lavoro di " +"Configura lo slot AMS da usare per un filamento utilizzato nell'attività di " "stampa." msgid "Filament used in this print job" @@ -3025,14 +3490,23 @@ msgid "Do not Enable AMS" msgstr "AMS non abilitato" msgid "Print using materials mounted on the back of the case" -msgstr "Stampa filamento con bobina esterna." +msgstr "Stampa filamento con bobina esterna" -msgid "Print with filaments in ams" -msgstr "Stampa con filamento AMS" +msgid "Print with filaments in AMS" +msgstr "Stampa con filamento nell'AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Stampa filamento con bobina esterna" +msgid "Auto Refill" +msgstr "Riempimento automatico" + +msgid "Left" +msgstr "Da sinistra" + +msgid "Right" +msgstr "Da Destra" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3040,34 +3514,37 @@ msgstr "" "Quando si esaurisce il materiale corrente, la stampante continuerà a " "stampare nel seguente ordine." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Gruppo" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Attualmente la stampante non supporta la ricarica automatica." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"Il backup del filamento AMS non è abilitato, è necessario abilitarlo nelle " -"impostazioni AMS." +"La sostituzione automatica del filamento AMS non è abilitata. È necessario " +"abilitarla nelle impostazioni AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Se ci sono due filamenti identici in AMS, il backup del filamento AMS sarà " -"abilitato.\n" -"(Attualmente supporta la fornitura automatica di materiali di consumo con lo " -"stesso marchio, tipo di materiale e colore)" msgid "DRY" -msgstr "DRY" +msgstr "ASCIUTTO" msgid "WET" -msgstr "WET" +msgstr "UMIDO" msgid "AMS Settings" msgstr "Impostazioni AMS" @@ -3079,12 +3556,12 @@ msgid "" "The AMS will automatically read the filament information when inserting a " "new Bambu Lab filament. This takes about 20 seconds." msgstr "" -"L'AMS leggerà automaticamente le informazioni sul filamento quando inserisce " -"una nuova bobina di filamento Bambu Lab. Questa operazione richiede circa 20 " -"secondi." +"L'AMS leggerà automaticamente le informazioni sul filamento quando si " +"inserisce una nuova bobina di filamento Bambu Lab. Questa operazione " +"richiede circa 20 secondi." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Nota: se durante la stampa viene inserito un nuovo filamento, l'AMS non " @@ -3102,8 +3579,8 @@ msgstr "Aggiorna all'avvio" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "L'AMS leggerà automaticamente le informazioni sul filamento inserito " "all'avvio. Ci vorrà circa 1 minuto. Il processo di lettura farà ruotare le " @@ -3122,33 +3599,29 @@ msgid "Update remaining capacity" msgstr "Aggiorna capacità residua" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"L'AMS stimerà la capacità residua del filamento Bambu dopo l'aggiornamento " -"delle informazioni. Durante la stampa, la capacità residua verrà aggiornata " -"automaticamente." msgid "AMS filament backup" -msgstr "Backup filamento AMS" +msgstr "Sostituzione automatica del filamento AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" -"L'AMS passerà automaticamente a un altro filamento con stesse proprietà " -"quando il filamento corrente si esaurisce" +"Quando il filamento corrente sarà esaurito, l'AMS passerà automaticamente a " +"un'altra bobina contenente un filamento con le stesse proprietà." msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "Rilevamento della stampa ad aria" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." +"Rileva gli intasamenti e l'usura del filamento, interrompendo immediatamente " +"la stampa per risparmiare tempo e filamento." msgid "File" msgstr "File" @@ -3160,29 +3633,29 @@ msgid "" "Failed to download the plug-in. Please check your firewall settings and vpn " "software, check and retry." msgstr "" -"Impossibile scaricare il plug-in. Controlla le impostazioni del firewall e " +"Impossibile scaricare il modulo. Controlla le impostazioni del firewall e " "VPN poi riprova." msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " "by anti-virus software." msgstr "" -"Impossibile installare il plug-in. Verificare se è bloccato o se è stato " +"Impossibile installare il modulo. Verificare se è bloccato o se è stato " "eliminato dall'antivirus." msgid "click here to see more info" msgstr "clicca per ulteriori informazioni" msgid "Please home all axes (click " -msgstr "Prego fai l'home degli assi (clicca " +msgstr "Porta gli assi al punto di origine (clicca " msgid "" ") to locate the toolhead's position. This prevents device moving beyond the " "printable boundary and causing equipment wear." msgstr "" -") per individuare la posizione della testa dell'utensile. In questo modo si " -"evita che il dispositivo si sposti oltre il limite stampabile, causando " -"l'usura dell'apparecchiatura." +") per individuare la posizione del gruppo testina. In questo modo si evita " +"che il dispositivo si sposti oltre il limite stampabile, causando l'usura " +"dell'apparecchiatura." msgid "Go Home" msgstr "Vai all'origine" @@ -3192,16 +3665,20 @@ msgid "" "program" msgstr "" "Si è verificato un errore. È possibile che la memoria del sistema sia " -"esaurita o che si sia verificato un bug." +"esaurita o che si sia verificato un bug" -msgid "Please save project and restart the program. " -msgstr "Salva il progetto e riavvia l'applicazione. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Si è verificato un errore irreversibile: \"%1%\"" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Salva il progetto e riavvia l'applicazione." + +msgid "Processing G-code from Previous file..." msgstr "Elaborazione G-Code dal file precedente..." msgid "Slicing complete" -msgstr "Slicing completato" +msgstr "Elaborazione completata" msgid "Access violation" msgstr "Violazione di accesso" @@ -3213,24 +3690,24 @@ msgid "Divide by zero" msgstr "Dividi per zero" msgid "Overflow" -msgstr "Sovra-estrusione" +msgstr "Sovraestrusione" msgid "Underflow" msgstr "Sotto-estrusione" msgid "Floating reserved operand" -msgstr "Floating reserved operand" +msgstr "Operando riservato decimale" msgid "Stack overflow" -msgstr "Stack overflow" +msgstr "Sovraestrusione pila" msgid "Running post-processing scripts" msgstr "Esecuzione script di post-elaborazione" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "Script di post-elaborazione eseguito correttamente" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "" "Si è verificato un errore sconosciuto durante l'esportazione del G-code." @@ -3241,7 +3718,7 @@ msgid "" "Error message: %1%" msgstr "" "Copia del G-code temporaneo sul G-code di uscita non riuscita. Forse la " -"scheda SD è bloccata in scrittura?\n" +"scheda SD è protetta da scrittura?\n" "Messaggio di errore: %1%" #, boost-format @@ -3250,10 +3727,9 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" -"Copia del G-code temporaneo nel G-code di output non riuscita. Potrebbe " -"esserci un problema nel dispositivo di destinazione, prova una nuova " -"esportazione con un dispositivo diverso. Il file G-code corrotto è su %1%." -"tmp." +"Copia del G-code temporaneo nel G-code di uscita non riuscita. Potrebbe " +"esserci un problema nel dispositivo di destinazione. Prova ad esportare di " +"nuovo o usa un dispositivo diverso. Il file G-code corrotto è su %1%.tmp." #, boost-format msgid "" @@ -3261,7 +3737,7 @@ msgid "" "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" "Non è stato possibile rinominare il G-code dopo la copia nella cartella di " -"destinazione selezionata. Il percorso corrente è %1%.tmp. Prova a esportare " +"destinazione selezionata. Il percorso corrente è %1%.tmp. Prova ad esportare " "di nuovo." #, boost-format @@ -3269,9 +3745,9 @@ msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"Copia del G-code temporaneo completata ma non è stato possibile aprire il " -"codice originale su %1% durante il controllo copia. Il G-code di output è su " -"%2%.tmp." +"Copia del G-code temporaneo completata ma non è stato possibile aprire il " +"codice originale su %1% durante la verifica della copia. Il G-code di uscita " +"è su %2%.tmp." #, boost-format msgid "" @@ -3279,253 +3755,34 @@ msgid "" "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" "Copia del G-code temporaneo completata ma non è stato possibile aprire il " -"codice esportato durante il controllo copia. Il G-code di output è su %1%." -"tmp." +"codice esportato durante la verifica della copia. Il G-code di uscita è su " +"%1%.tmp." #, boost-format msgid "G-code file exported to %1%" msgstr "G-code esportato in %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Errore sconosciuto nell'esportazione del G-code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"Impossibile salvare il file del G-code.\n" +"Impossibile salvare il file G-code.\n" "Messaggio di errore: %1%.\n" "File sorgente %2%." msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Copia del G-code temporaneo nel G-code di output non riuscita." +msgstr "Copia del G-code temporaneo nel G-code di uscita non riuscita" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" -"Programmazione del caricamento su `%1%`. Vedere finestra -> Coda di " -"caricamento Host di Stampa" - -msgid "Device" -msgstr "Dispositivo" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "Vista" - -msgid "N/A" -msgstr "N/D" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Aggiungi" - -msgid "Idle" -msgstr "Inattivo" - -msgid "Printing" -msgstr "Stampa" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Non compatibile" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Prepara" - -msgid "Slicing" -msgstr "Slicing" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Invio…" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Continua" - -msgid "Stop" -msgstr "Ferma" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Caricamento…" - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Preparazione lavoro di stampa" - -msgid "Abnormal print file data. Please slice again" -msgstr "Dati file di stampa anormali. Eseguire nuovamente l'elaborazione" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Livellamento piano" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Invia" - -msgid "Name is invalid;" -msgstr "Nome non valido;" - -msgid "illegal characters:" -msgstr "Caratteri illegali:" - -msgid "illegal suffix:" -msgstr "Suffisso illegale:" - -msgid "The name is not allowed to be empty." -msgstr "Il campo nome non può essere vuoto." - -msgid "The name is not allowed to start with space character." -msgstr "Il nome non può iniziare con uno spazio." - -msgid "The name is not allowed to end with space character." -msgstr "Il nome non può terminare con uno spazio." - -msgid "The name length exceeds the limit." -msgstr "La lunghezza del nome supera il limite." +"Programmazione del caricamento su `%1%`. Vedi Finestra -> Coda caricamento " +"host di stampa" msgid "Origin" msgstr "Origine" @@ -3537,7 +3794,7 @@ msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" -"Distanza della coordinata 0,0 del G-code dall'angolo frontale sinistro del " +"Distanza della coordinata 0,0 del G-code dall'angolo anteriore sinistro del " "rettangolo." msgid "" @@ -3560,7 +3817,7 @@ msgid "Settings" msgstr "Impostazioni" msgid "Texture" -msgstr "Texture" +msgstr "Trama" msgid "Remove" msgstr "Rimuovi" @@ -3572,7 +3829,7 @@ msgid "Model" msgstr "Modello" msgid "Choose an STL file to import bed shape from:" -msgstr "Scegli un file STL da cui importare la forma del piano:" +msgstr "Scegli un file STL da cui importare la forma del piano di stampa:" msgid "Invalid file format." msgstr "Formato file non valido." @@ -3590,27 +3847,28 @@ msgstr "" msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" -"Seleziona un file da cui importare la forma del piano di stampa (PNG/SVG):" +"Seleziona un file da cui importare la trama del piano di stampa (PNG/SVG):" msgid "Choose an STL file to import bed model from:" -msgstr "Scegli un file STL da cui importare il modello del piano:" +msgstr "Scegli un file STL da cui importare il modello del piano di stampa:" msgid "Bed Shape" msgstr "Forma Piano" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"La temperatura minima consigliata è inferiore a 190 gradi o la temperatura " -"massima consigliata è superiore a 300 gradi.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" +"La temperatura minima consigliata non può essere superiore alla temperatura " +"massima consigliata.\n" msgid "Please check.\n" msgstr "Controlla.\n" @@ -3620,48 +3878,48 @@ msgid "" "Please make sure whether to use the temperature to print.\n" "\n" msgstr "" -"Il Nozzle potrebbe intasarsi quando la temperatura non rientra " +"L'ugello potrebbe intasarsi quando la temperatura non rientra " "nell'intervallo consigliato.\n" "Assicurarsi di utilizzare questa temperatura per la stampa.\n" "\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"La temperatura del nozzle consigliata per questo filamento è [%d, %d] gradi " -"centigradi" +"La temperatura dell'ugello consigliata per questo filamento è [%d, %d] gradi " +"Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Velocità volumetrica massima troppo bassa.\n" "Il valore è stato ripristinato a 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "L'attuale temperatura della camera è superiore alla temperatura di sicurezza " -"del materiale, può causare l'ammorbidimento e l'intasamento del materiale. " -"La temperatura massima di sicurezza per il materiale è %d" +"del materiale. Potrebbe causare l'ammorbidimento e l'intasamento del " +"materiale. La temperatura massima di sicurezza per il materiale è %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" -"Altezza del layer troppo piccola\n" +"Altezza delo strato troppo piccola.\n" "È stata ripristinata a 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" -"Spaziatura stiratura troppo piccola\n" +"Spaziatura di stiratura troppo piccola.\n" "È stata ripristinata a 0,1" msgid "" @@ -3669,9 +3927,9 @@ msgid "" "\n" "The first layer height will be reset to 0.2." msgstr "" -"L'altezza zero primo layer non è valida.\n" +"Un'altezza pari a 0 sul primo strato non è valida.\n" "\n" -"L'altezza primo layer verrà ripristinata a 0,2." +"L'altezza del primo strato verrà ripristinata a 0,2." msgid "" "This setting is only used for model size tunning with small value in some " @@ -3681,13 +3939,13 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"Questa viene utilizzata solo per regolare le dimensioni del modello in " -"piccole quantità.\n" +"Questa impostazione viene utilizzata solo per regolare le dimensioni del " +"modello con valori esigui.\n" "Ad esempio, quando le dimensioni del modello presentano piccoli errori o " "quando le tolleranze non sono corrette. Per regolazioni di grandi " "dimensioni, si prega di utilizzare la funzione di scala del modello.\n" "\n" -"Il valore verrà reimpostato su 0." +"Il valore verrà reimpostato a 0." msgid "" "Too large elephant foot compensation is unreasonable.\n" @@ -3696,30 +3954,30 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"Il valore di compensazione del piede di elefante è troppo grande.\n" -"Se i problemi zampa d'elefante sono significativi, controllare altre " +"Il valore di compensazione della zampa d'elefante è troppo grande.\n" +"Se i problemi di zampa d'elefante sono significativi, controllare altre " "impostazioni.\n" -"Ad esempio, la temperatura del piano potrebbe essere troppo alta.\n" +"Ad esempio, la temperatura del piatto potrebbe essere troppo alta.\n" "\n" -"Il valore viene riportato a 0." +"Il valore verrà reimpostato a 0." msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"Parete Aggiuntiva Alternativa on funziona bene quando Garantisci spessore " -"verticale del guscio è impostato su Tutto. " +"Parete aggiuntiva alternativa non funziona bene quando \"Garantisci spessore " +"verticale del guscio\" è impostato su Tutto." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" -"Modificare automaticamente queste impostazioni? \n" -"Sì - Modifica Garantisci spessore verticale del guscio a Moderato e abilita " -"Parete Aggiuntiva Alternativa\n" -"No - Non utilizzare Parete Aggiuntiva Alternativa" +"Modificare automaticamente queste impostazioni?\n" +"Sì - Modifica \"Garantisci spessore verticale del guscio\" a Moderato e " +"abilita Parete aggiuntiva alternativa\n" +"No - Non utilizzare Parete aggiuntiva alternativa" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3728,11 +3986,12 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"Prime tower non funziona quando layer Adattativo o Altezza supporto Layer " -"indipendente sono attivati.\n" +"La torre di spurgo non funziona quando Altezza strato adattiva o Altezza " +"strato di supporto indipendente sono attivati.\n" "Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni layer Adattativo e Altezza supporto Layer indipendente" +"SÌ - Mantieni torre di spurgo\n" +"NO - Mantieni Altezza strato adattiva e Altezza strato di supporto " +"indipendente" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3740,10 +3999,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"Prime tower non funziona quando layer adattativo è attivo.\n" +"La torre di spurgo non funziona quando Altezza strato adattiva è attivo.\n" "Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni l'ayer adattativo" +"SÌ - Mantieni torre di spurgo\n" +"NO - Mantieni Altezza strato adattiva" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" @@ -3751,53 +4010,67 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"Prime tower non funziona quando Altezza Supporto Layer indipendente è " -"attiva.\n" +"La torre di spurgo non funziona quando Altezza strato di supporto " +"indipendente è attiva.\n" "Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni Altezza Supporto Layer indipendente" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Durante la stampa per oggetto, il Nozzle potrebbe urtare lo skirt.\n" -"Quindi, ripristina il layer skirt su 1 per evitare collisioni." +"SÌ - Mantieni torre di spurgo\n" +"NO - Mantieni Altezza strato di supporto indipendente" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" -"seam_slope_start_height deve essere inferiore a layer_heightReimpostare a 0." +"seam_slope_start_height deve essere inferiore a layer_height.\n" +"È stato ripristinato a 0." + +#, c-format, boost-format +msgid "" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"La modalità spirale funziona solo quando il valore loop parete è 1, il " -"supporto è disabilitato, i il valore dei layer superiori del guscio è 0, la " -"densità riempimento è 0 e il tipo di timelapse è tradizionale." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Ma le macchine con la struttura I3 non genereranno video timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Modificare queste impostazioni automaticamente? \n" -"Si - Modifica queste impostazioni ed abilita la modalità spirale/vaso\n" +"Modificare queste impostazioni automaticamente?\n" +"Sì - Modifica queste impostazioni ed abilita la modalità spirale " +"automaticamente\n" "No - Annulla l'attivazione della modalità a spirale" +msgid "Printing" +msgstr "Stampa" + msgid "Auto bed leveling" -msgstr "Livellamento automatico piano" +msgstr "Livellamento automatico piatto" msgid "Heatbed preheating" -msgstr "Preriscaldamento del piano" +msgstr "Preriscaldamento del piatto" -msgid "Sweeping XY mech mode" -msgstr "Modalità Sweeping XY mech" +msgid "Vibration compensation" +msgstr "Compensazione delle vibrazioni" msgid "Changing filament" msgstr "Cambio filamento" @@ -3805,20 +4078,20 @@ msgstr "Cambio filamento" msgid "M400 pause" msgstr "M400 pausa" -msgid "Paused due to filament runout" -msgstr "Pausa per filamento esaurito" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Riscaldamento hotend" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Calibrazione estrusione" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Scansione superfice piatto" msgid "Inspecting first layer" -msgstr "Ispezione del primo layer" +msgstr "Ispezione del primo strato" msgid "Identifying build plate type" msgstr "Identificazione tipo piatto di stampa" @@ -3827,91 +4100,151 @@ msgid "Calibrating Micro Lidar" msgstr "Calibrazione Micro Lidar" msgid "Homing toolhead" -msgstr "Homing testa di stampa" +msgstr "Riposizionamento gruppo testina" msgid "Cleaning nozzle tip" -msgstr "Pulizia nozzle" +msgstr "Pulizia ugello" msgid "Checking extruder temperature" msgstr "Controllo temperatura dell'estrusore" -msgid "Printing was paused by the user" -msgstr "Stampa messa in pausa dall'utente" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pausa caduta cover anteriore" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" -msgstr "Calibrazione micro lidar" +msgid "Calibrating the micro lidar" +msgstr "Calibrazione Micro Lidar" -msgid "Calibrating extrusion flow" -msgstr "Calibrazione flusso estrusore" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pausa per malfunzionamento temperatura nozzle" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pausa per malfunzionamento della temperatura piano termico" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Scarico del filamento" -msgid "Skip step pause" -msgstr "Salta la pausa del passaggio" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Caricamento del filamento" -msgid "Motor noise calibration" -msgstr "Calibrazione del rumore del motore" +msgid "Motor noise cancellation" +msgstr "Cancellazione del rumore del motore" -msgid "Paused due to AMS lost" -msgstr "Sospeso a causa della perdita di AMS" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Pausa dovuta alla bassa velocità della ventola del termocontrollo" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Pausa a causa di un errore di controllo della temperatura della camera" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Raffreddamento della camera" -msgid "Paused by the Gcode inserted by user" -msgstr "Messo in pausa dal Gcode inserito dall'utente" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" -msgstr "Evidente rumorosità del rumore" +msgstr "Evidente rumorosità del motore" -msgid "Nozzle filament covered detected pause" -msgstr "Pausa quando viene rilevato un nozzle coperto di filamenti" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pausa in caso di errore di taglio" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Pausa in caso di errore nel primo layer" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pausa in caso di intasamento del nozzle" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Sconosciuto" -msgid "Fatal" -msgstr "Irreversibile" - -msgid "Serious" -msgstr "Serio" - -msgid "Common" -msgstr "Comune" - msgid "Update successful." msgstr "Aggiornamento riuscito." msgid "Downloading failed." -msgstr "Download fallito." +msgstr "Scaricamento fallito." msgid "Verification failed." msgstr "Verifica fallita." @@ -3919,73 +4252,142 @@ msgstr "Verifica fallita." msgid "Update failed." msgstr "Aggiornamento fallito." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"La temperatura attuale della camera o la temperatura target della camera " -"supera i 45℃. Per evitare l'intasamento dell'estrusore, non è consentito " -"caricare filamenti a bassa temperatura (PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Nell'estrusore viene caricato un filamento a bassa temperatura (PLA/PETG/" -"TPU). Per evitare l'intasamento dell'estrusore, non è consentito impostare " -"una temperatura della camera superiore a 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Quando si imposta la temperatura della camera al di sotto di 40°C, il " "controllo della temperatura della camera non verrà attivato. La temperatura " -"target della camera sarà automaticamente impostata su 0℃." +"obiettivo della camera sarà automaticamente impostata su 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Impossibile avviare il processo di stampa" msgid "" "This calibration does not support the currently selected nozzle diameter" msgstr "" -"Questa calibrazione non supporta il diametro del nozzle attualmente " +"Questa calibrazione non supporta il diametro dell'ugello attualmente " "selezionato" msgid "Current flowrate cali param is invalid" -msgstr "Il parametro cali della portata corrente non è valido" +msgstr "Il parametro di calibrazione del flusso corrente non è valido" msgid "Selected diameter and machine diameter do not match" msgstr "Il diametro selezionato e il diametro della macchina non corrispondono" -msgid "Failed to generate cali gcode" -msgstr "Impossibile generare cali gcode" +msgid "Failed to generate cali G-code" +msgstr "Impossibile generare G-code di calibrazione" msgid "Calibration error" msgstr "Errore di calibrazione" -msgid "TPU is not supported by AMS." -msgstr "Il TPU non è supportato da AMS." +msgid "Resume Printing" +msgstr "Riprendi Stampa" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF non è supportato da AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Damp PVA diventerà flessibile e rimarrà bloccato all'interno di AMS, si " -"prega di fare attenzione ad asciugarlo prima dell'uso." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Interrompi Stampa" + +msgid "Check Assistant" +msgstr "Assistente di controllo" + +msgid "Filament Extruded, Continue" +msgstr "Filamento estruso, Continua" + +msgid "Not Extruded Yet, Retry" +msgstr "Non ancora estruso, Riprova" + +msgid "Finished, Continue" +msgstr "Completato, Continua" + +msgid "Load Filament" +msgstr "Carica Filamento" + +msgid "Filament Loaded, Resume" +msgstr "Filamento caricato, Riprendi" + +msgid "View Liveview" +msgstr "Visualizza video in diretta" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Fatto" + +msgid "Retry" +msgstr "Riprova" + +msgid "Resume" +msgstr "Continua" + +msgid "Unknown error." msgstr "" -"I filamenti CF / GF sono duri e fragili, è facile rompersi o rimanere " -"bloccati in AMS, si prega di usare con cautela." msgid "default" msgstr "predefinito" @@ -3996,35 +4398,34 @@ msgstr "Modifica G-code personalizzato (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -"Placeholder incorporati (fai doppio clic sull'elemento per aggiungerlo al G-" -"code)" +"Segnaposto integrati (fai doppio clic sull'elemento per aggiungerlo al G-code" -msgid "Search gcode placeholders" -msgstr "" +msgid "Search G-code placeholders" +msgstr "Cerca segnaposto G-code" msgid "Add selected placeholder to G-code" -msgstr "Aggiungi il placeholder selezionato al G-code" +msgstr "Aggiungi il segnaposto selezionato al G-code" msgid "Select placeholder" -msgstr "Seleziona placeholder" +msgstr "Seleziona segnaposto" msgid "[Global] Slicing State" -msgstr "" +msgstr "Stato di elaborazione [Globale]" msgid "Read Only" -msgstr "" +msgstr "Sola lettura" msgid "Read Write" -msgstr "" +msgstr "Lettura Scrittura" msgid "Slicing State" -msgstr "" +msgstr "Stato di elaborazione" msgid "Print Statistics" msgstr "Statistiche di Stampa" msgid "Objects Info" -msgstr "" +msgstr "Informazioni Oggetti" msgid "Dimensions" msgstr "Dimensioni" @@ -4033,14 +4434,14 @@ msgid "Temperatures" msgstr "Temperature" msgid "Timestamps" -msgstr "Timestamp" +msgstr "Marca temporale" #, boost-format msgid "Specific for %1%" msgstr "Specifico per %1%" msgid "Presets" -msgstr "Preset" +msgstr "Profili" msgid "Print settings" msgstr "Impostazioni di stampa" @@ -4058,7 +4459,7 @@ msgid "parameter name" msgstr "nome parametro" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s non può essere una percentuale" #, c-format, boost-format @@ -4070,7 +4471,7 @@ msgstr "Validazione parametri" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "Il valore %s è fuori intervallo. L'intervallo valido è da %d a %d." msgid "Value is out of range." msgstr "Valore fuori intervallo." @@ -4081,30 +4482,47 @@ msgid "" "YES for %s%%, \n" "NO for %s %s." msgstr "" -"Is it %s%% or %s %s?\n" -"YES for %s%%, \n" -"NO for %s %s." +"È %s%% o %s %s?\n" +"Sì per %s%%, \n" +"NO per %s %s." #, boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" -"Formato di input non valido. Vettore di dimensioni previsto nel seguente " -"formato: \"%1%\"" +"Formato di immissione non valido. Vettore di dimensioni previsto nel " +"seguente formato: \"%1%\"" msgid "Input value is out of range" -msgstr "Valore input fuori portata" +msgstr "Valore immesso fuori portata" msgid "Some extension in the input is invalid" msgstr "Alcune estensioni nell'input non sono valide" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Formato non valido. Formato vettoriale previsto: \"%1%\"" +msgid "N/A" +msgstr "N/D" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" -msgstr "Altezza layer" +msgstr "Altezza strato" msgid "Line Width" msgstr "Larghezza linea" @@ -4112,9 +4530,6 @@ msgstr "Larghezza linea" msgid "Fan Speed" msgstr "Velocità ventola" -msgid "Temperature" -msgstr "Temperatura" - msgid "Flow" msgstr "Flusso" @@ -4122,10 +4537,10 @@ msgid "Tool" msgstr "Strumento" msgid "Layer Time" -msgstr "Tempo layer" +msgstr "Durata strato" msgid "Layer Time (log)" -msgstr "Tempo layer (log)" +msgstr "Durata strato (log)" msgid "Height: " msgstr "Altezza: " @@ -4140,7 +4555,7 @@ msgid "Flow: " msgstr "Flusso: " msgid "Layer Time: " -msgstr "Tempo layer: " +msgstr "Durata strato: " msgid "Fan: " msgstr "Velocità ventola: " @@ -4148,7 +4563,7 @@ msgstr "Velocità ventola: " msgid "Temperature: " msgstr "Temperatura: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Caricamento del G-code" msgid "Generating geometry vertex data" @@ -4161,7 +4576,7 @@ msgid "Statistics of All Plates" msgstr "Statistiche di tutti i piatti" msgid "Display" -msgstr "Display" +msgstr "Mostra" msgid "Flushed" msgstr "Spurgo" @@ -4181,6 +4596,72 @@ msgstr "Tempo totale" msgid "Total cost" msgstr "Costo totale" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Suggerimenti:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Suggerimenti" + msgid "up to" msgstr "fino a" @@ -4190,20 +4671,14 @@ msgstr "sopra" msgid "from" msgstr "da" -msgid "Color Scheme" -msgstr "Schema Colore" - msgid "Time" msgstr "Tempo" -msgid "Percent" -msgstr "Percentuale" - -msgid "Used filament" -msgstr "Filamento usato" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" -msgstr "Altezza layer (mm)" +msgstr "Altezza strato (mm)" msgid "Line Width (mm)" msgstr "Larghezza linea (mm)" @@ -4218,7 +4693,7 @@ msgid "Temperature (°C)" msgstr "Temperatura (°C)" msgid "Volumetric flow rate (mm³/s)" -msgstr "Flusso volumetrico (mm³/s)" +msgstr "Portata volumetrica (mm³/s)" msgid "Travel" msgstr "Spostamento" @@ -4236,23 +4711,23 @@ msgid "Filament Changes" msgstr "Cambi filamento" msgid "Wipe" -msgstr "Pulitura" +msgstr "Spurgo" msgid "Options" msgstr "Opzioni" msgid "travel" -msgstr "Spostamento" +msgstr "spostamento" msgid "Extruder" msgstr "Estrusore" -msgid "Filament change times" -msgstr "Tempi cambio filamento" - msgid "Cost" msgstr "Costo" +msgid "Filament change times" +msgstr "Tempi cambio filamento" + msgid "Color change" msgstr "Cambio colore" @@ -4262,11 +4737,8 @@ msgstr "Stampa" msgid "Printer" msgstr "Stampante" -msgid "Custom g-code" -msgstr "G-code personalizzato" - -msgid "ToolChange" -msgstr "Cambio utensile" +msgid "Tool Change" +msgstr "Cambio testina" msgid "Time Estimation" msgstr "Tempo stimato" @@ -4275,10 +4747,10 @@ msgid "Normal mode" msgstr "Modalità normale" msgid "Total Filament" -msgstr "Total Filament" +msgstr "Filamento totale" msgid "Model Filament" -msgstr "Model Filament" +msgstr "Filamento modello" msgid "Prepare time" msgstr "Tempo preparazione" @@ -4292,8 +4764,21 @@ msgstr "Passa a modalità silenziosa" msgid "Switch to normal mode" msgstr "Passa a modalità normale" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" -msgstr "Altezza layer adattativo" +msgstr "Altezza strato adattiva" msgid "Adaptive" msgstr "Adattiva" @@ -4308,34 +4793,22 @@ msgid "Radius" msgstr "Raggio" msgid "Keep min" -msgstr "Mantieni min" - -msgid "Left mouse button:" -msgstr "Tasto sinistro del mouse:" +msgstr "Mantieni al minimo" msgid "Add detail" msgstr "Aggiungi dettaglio" -msgid "Right mouse button:" -msgstr "Tasto destro mouse:" - msgid "Remove detail" -msgstr "Rimuovi dettagli" - -msgid "Shift + Left mouse button:" -msgstr "Shift + Tasto sinistro mouse:" +msgstr "Rimuovi dettaglio" msgid "Reset to base" msgstr "Ripristina alla base" -msgid "Shift + Right mouse button:" -msgstr "Shift + Tasto destro mouse:" - msgid "Smoothing" -msgstr "Lisciatura" +msgstr "Levigatura" msgid "Mouse wheel:" -msgstr "Rotella del mouse:" +msgstr "Rotellina del mouse:" msgid "Increase/decrease edit area" msgstr "Aumenta/diminuisci l'area di modifica" @@ -4343,11 +4816,60 @@ msgstr "Aumenta/diminuisci l'area di modifica" msgid "Sequence" msgstr "Sequenza" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Specchia Oggetto" msgid "Tool Move" -msgstr "Sposta strumento" +msgstr "Strumento Sposta" msgid "Tool Rotate" msgstr "Strumento Ruota" @@ -4374,7 +4896,7 @@ msgid "Spacing" msgstr "Spaziatura" msgid "0 means auto spacing." -msgstr "0 means auto spacing." +msgstr "0 significa spaziatura automatica." msgid "Auto rotate for arrangement" msgstr "Ruota automaticamente per disporre" @@ -4388,11 +4910,25 @@ msgstr "Evitare la regione di calibrazione dell'estrusione" msgid "Align to Y axis" msgstr "Allinea all'asse Y" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Aggiungi" + msgid "Add plate" msgstr "Aggiungi piatto" -msgid "Auto orient" -msgstr "Orientamento automatico" +msgid "Auto orient all/selected objects" +msgstr "Orientamento automatico tutti/selezionati oggetti" + +msgid "Auto orient all objects on current plate" +msgstr "Orientamento automatico tutti gli oggetti sul piatto corrente" msgid "Arrange all objects" msgstr "Disponi tutti gli oggetti" @@ -4407,17 +4943,35 @@ msgid "Split to parts" msgstr "Dividi in parti" msgid "Assembly View" -msgstr "Vista montaggio" +msgstr "Vista di montaggio" msgid "Select Plate" -msgstr "Seleziona piatto" +msgstr "Seleziona Piatto" + +msgid "Slicing" +msgstr "Elaborazione" + +msgid "Slice all" +msgstr "Elabora tutto" + +msgid "Failed" +msgstr "Fallito" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" msgid "Assembly Return" msgstr "Ritorna al montaggio" -msgid "return" +msgid "Return" msgstr "Indietro" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "Barra strumenti di pittura" @@ -4425,13 +4979,16 @@ msgid "Explosion Ratio" msgstr "Rapporto di esplosione" msgid "Section View" -msgstr "Vista in sezione" +msgstr "Vista della sezione" msgid "Assemble Control" msgstr "Controllo assemblaggio" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" -msgstr "Total Volume:" +msgstr "Volume totale:" msgid "Assembly Info" msgstr "Informazioni sul montaggio" @@ -4444,51 +5001,86 @@ msgstr "Dimensione:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Sono stati trovati conflitti di percorsi nel gcode sul layer %d, z = %.2lf " -"mm. Si prega di separare gli oggetti in conflitto (%s <-> %s)." +"Sono stati trovati conflitti di percorsi nel G-code sullo strato %d, Z = " +"%.2lfmm. Si prega di separare gli oggetti in conflitto (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Un oggetto è posizionato oltre il bordo del piatto." msgid "A G-code path goes beyond the max print height." -msgstr "Un percorso del G-code va oltre l'altezza di stampa massima." +msgstr "Un percorso del G-code supera l'altezza massima di stampa." -msgid "A G-code path goes beyond the boundary of plate." -msgstr "A G-code path goes beyond plate boundaries." +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Un percorso del G-code supera il limite del piatto." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "È visibile solo l'oggetto da modificare." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Un oggetto è posizionato oltre il limite del piatto o supera il limite di " -"altezza.\n" -"Risolvi il problema spostando l'oggetto completamente dentro o fuori il " -"piatto verificando che l'altezza rientri nel volume di costruzione." msgid "Calibration step selection" msgstr "Seleziona calibrazione" msgid "Micro lidar calibration" -msgstr "Calibrazione micro lidar" +msgstr "Calibrazione Micro Lidar" msgid "Bed leveling" -msgstr "Livellamento del piano" +msgstr "Livellamento del piatto" -msgid "Vibration compensation" -msgstr "Compensazione delle vibrazioni" - -msgid "Motor noise cancellation" -msgstr "Cancellazione del rumore del motore" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" -msgstr "Programma calibrazione" +msgstr "Programma di calibrazione" msgid "" "The calibration program detects the status of your device automatically to " @@ -4503,25 +5095,25 @@ msgid "Calibration Flow" msgstr "Calibrazione flusso" msgid "Start Calibration" -msgstr "Start Calibration" +msgstr "Avvia Calibrazione" msgid "Completed" msgstr "Completato" msgid "Calibrating" -msgstr "Calibrazione" +msgstr "Calibrazione in corso" msgid "No step selected" -msgstr "Nessun Step selezionato" +msgstr "Nessun passaggio selezionato" msgid "Auto-record Monitoring" -msgstr "Monitora registrazione automatica" +msgstr "Monitoraggio registrazione automatica" msgid "Go Live" msgstr "Vai in diretta" msgid "Liveview Retry" -msgstr "Riprova Liveview" +msgstr "Riprova video in diretta" msgid "Resolution" msgstr "Risoluzione" @@ -4533,32 +5125,29 @@ msgid "Hostname or IP" msgstr "Nome Host o IP" msgid "Custom camera source" -msgstr "Sorgente fotocamera personalizzata" +msgstr "Sorgente telecamera personalizzata" msgid "Show \"Live Video\" guide page." msgstr "Mostra pagina della guida \"Diretta Video\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Connetti la stampante (LAN)" msgid "Please input the printer access code:" msgstr "Inserisci il codice di accesso alla stampante:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Si trova in \"Impostazioni > Rete > Codice di accesso\".\n" -"sulla stampante, come mostrato nella figura:" msgid "Invalid input." -msgstr "Input non valido." +msgstr "Immissione non valido." msgid "New Window" msgstr "Nuova finestra" @@ -4567,25 +5156,31 @@ msgid "Open a new window" msgstr "Apri una nuova finestra" msgid "Application is closing" -msgstr "Closing application" +msgstr "L'applicazione si sta chiudendo" msgid "Closing Application while some presets are modified." -msgstr "Chiusura dell'applicazione durante la modifica di alcuni preset." +msgstr "Chiusura dell'applicazione durante la modifica di alcuni profili." msgid "Logging" msgstr "Accesso" +msgid "Prepare" +msgstr "Prepara" + msgid "Preview" msgstr "Anteprima" +msgid "Device" +msgstr "Dispositivo" + msgid "Multi-device" -msgstr "Multi-device" +msgstr "Multi-dispositivo" msgid "Project" msgstr "Progetto" msgid "Yes" -msgstr "Si" +msgstr "Sì" msgid "No" msgstr "No" @@ -4594,17 +5189,17 @@ msgid "will be closed before creating a new model. Do you want to continue?" msgstr "verrà chiuso prima di creare un nuovo modello. Vuoi continuare?" msgid "Slice plate" -msgstr "Slice piatto" +msgstr "Elabora piatto" msgid "Print plate" -msgstr "Stampa piatto" - -msgid "Slice all" -msgstr "Slice tutto" +msgstr "Piatto di stampa" msgid "Export G-code file" msgstr "Esporta file G-code" +msgid "Send" +msgstr "Invia" + msgid "Export plate sliced file" msgstr "Esporta il file del piatto elaborato" @@ -4617,14 +5212,17 @@ msgstr "Stampa tutto" msgid "Send all" msgstr "Invia tutto" +msgid "Send to Multi-device" +msgstr "Invia a più dispositivi" + msgid "Keyboard Shortcuts" -msgstr "Scorciatoie Tastiera" +msgstr "Scorciatoie da tastiera" msgid "Show the list of the keyboard shortcuts" -msgstr "Mostra l'elenco delle scorciatoie di tastiera" +msgstr "Mostra l'elenco delle scorciatoie da tastiera" msgid "Setup Wizard" -msgstr "Setup Wizard" +msgstr "Configurazione Guidata" msgid "Show Configuration Folder" msgstr "Mostra cartella di configurazione" @@ -4651,43 +5249,33 @@ msgstr "Scarica Modelli" msgid "Default View" msgstr "Vista predefinita" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Superiore" - msgid "Top View" -msgstr "Vista superiore" +msgstr "Vista dall'alto" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" -msgstr "Inferiore" +msgstr "Dal basso" msgid "Bottom View" -msgstr "Vista inferiore" +msgstr "Vista dal basso" msgid "Front" -msgstr "Frontale" +msgstr "Di fronte" msgid "Front View" -msgstr "Vista anteriore" +msgstr "Vista di fronte" msgid "Rear" -msgstr "Posteriore" +msgstr "Da dietro" msgid "Rear View" -msgstr "Vista posteriore" - -msgid "Left" -msgstr "Sinistra" +msgstr "Vista da dietro" msgid "Left View" -msgstr "Vista sinistra" - -msgid "Right" -msgstr "Destra" +msgstr "Vista da sinistra" msgid "Right View" -msgstr "Vista destra" +msgstr "Vista da destra" msgid "Start a new window" msgstr "Inizia in una nuova finestra" @@ -4701,8 +5289,8 @@ msgstr "Inizia un nuovo progetto" msgid "Open a project file" msgstr "Apri un file progetto" -msgid "Recent projects" -msgstr "Progetti recenti" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Salva Progetto" @@ -4713,9 +5301,6 @@ msgstr "Salva progetto corrente su file" msgid "Save Project as" msgstr "Salva Progetto come" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Salva Progetto corrente come" @@ -4726,10 +5311,10 @@ msgid "Load a model" msgstr "Carica modello" msgid "Import Zip Archive" -msgstr "" +msgstr "Importa archivio Zip" msgid "Load models contained within a zip archive" -msgstr "" +msgstr "Carica i modelli contenuti in un archivio zip" msgid "Import Configs" msgstr "Importa configurazioni" @@ -4744,13 +5329,13 @@ msgid "Export all objects as one STL" msgstr "Esporta tutti gli oggetti come un unico STL" msgid "Export all objects as STLs" -msgstr "Esporta tutti gli oggetti come AWL" +msgstr "Esporta tutti gli oggetti come STL multipli" msgid "Export Generic 3MF" -msgstr "Esporta 3mf generico" +msgstr "Esporta 3MF generico" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Esporta file 3mf senza usare alcune estensioni 3mf" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Esporta file 3MF senza usare le estensioni." msgid "Export current sliced file" msgstr "Esporta il file elaborato corrente" @@ -4764,11 +5349,14 @@ msgstr "Esporta G-code" msgid "Export current plate as G-code" msgstr "Esporta piatto corrente come G-code" +msgid "Export toolpaths as OBJ" +msgstr "Esporta percorso strumento come OBJ" + msgid "Export Preset Bundle" -msgstr "" +msgstr "Esporta pacchetto profili" msgid "Export current configuration to files" -msgstr "Esporta la configurazione corrente in file" +msgstr "Esporta la configurazione corrente in un file" msgid "Export" msgstr "Esporta" @@ -4810,10 +5398,16 @@ msgid "Deletes all objects" msgstr "Elimina tutti gli oggetti" msgid "Clone selected" -msgstr "Clone selezionato" +msgstr "Clona selezionato" msgid "Clone copies of selections" -msgstr "Clonare copie delle selezioni" +msgstr "Clona copie delle selezioni" + +msgid "Duplicate Current Plate" +msgstr "Duplica piatto corrente" + +msgid "Duplicate the current plate" +msgstr "Duplica il piatto corrente" msgid "Select all" msgstr "Seleziona tutto" @@ -4833,39 +5427,58 @@ msgstr "Usa vista prospettica" msgid "Use Orthogonal View" msgstr "Usa vista ortogonale" -msgid "Show &G-code Window" -msgstr "Mostra la finestra del G-code" +msgid "Auto Perspective" +msgstr "Vista prospettica automatica" -msgid "Show g-code window in Previce scene" -msgstr "Mostra finestra G-code nella scena di anteprima" +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Passa automaticamente dalla vista ortogonale a quella prospettica quando si " +"selezionano le viste dall'alto/dal basso/da destra/da sinistra." + +msgid "Show &G-code Window" +msgstr "Mostra finestra del G-code" + +msgid "Show G-code window in Preview scene." +msgstr "Mostra finestra G-code nella scena di anteprima." msgid "Show 3D Navigator" msgstr "Mostra navigatore 3D" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Mostra navigatore 3D nella scena Prepara e visualizza anteprima" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Mostra navigatore 3D nella sezione Prepara e Anteprima." msgid "Reset Window Layout" -msgstr "Ripristina layout finestra" +msgstr "Ripristina disposizione finestra" msgid "Reset to default window layout" -msgstr "Ripristina il layout predefinito della finestra" +msgstr "Ripristina la disposizione predefinita della finestra" msgid "Show &Labels" -msgstr "Mostra &Etichette" +msgstr "Mostra Etichette" -msgid "Show object labels in 3D scene" -msgstr "Mostra etichette oggetti nella scena 3D" +msgid "Show object labels in 3D scene." +msgstr "Mostra etichette oggetti nella scena 3D." msgid "Show &Overhang" -msgstr "Mostra sporgenze" +msgstr "Mostra Sporgenze" -msgid "Show object overhang highlight in 3D scene" -msgstr "Mostra la sporgenza dell'oggetto evidenziata nella scena 3D" +msgid "Show object overhang highlight in 3D scene." +msgstr "Mostra la sporgenza dell'oggetto evidenziata nella scena 3D." + +msgid "Show Selected Outline (beta)" +msgstr "Mostra contorno selezionato (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Mostra il contorno attorno all'oggetto selezionato nella scena 3D." msgid "Preferences" msgstr "Preferenze" +msgid "View" +msgstr "Vista" + msgid "Help" msgstr "Aiuto" @@ -4876,44 +5489,62 @@ msgid "Pass 1" msgstr "Passaggio 1" msgid "Flow rate test - Pass 1" -msgstr "Test di portata - Pass 1" +msgstr "Test flusso di stampa - Passaggio 1" msgid "Pass 2" msgstr "Passaggio 2" msgid "Flow rate test - Pass 2" -msgstr "Test di portata - Pass 2" +msgstr "Test flusso di stampa - Passaggio 2" + +msgid "YOLO (Recommended)" +msgstr "YOLO (Consigliato)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Calibrazione del flusso di stampa Orca YOLO, incrementi di 0,01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (versione per perfezionisti)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Calibrazione del flusso di stampa Orca YOLO, incrementi di 0,005" msgid "Flow rate" -msgstr "Flusso" +msgstr "Flusso di stampa" msgid "Pressure advance" msgstr "Anticipo di pressione" msgid "Retraction test" -msgstr "Prova di retrazione" - -msgid "Orca Tolerance Test" -msgstr "Test di tolleranza dell'orca" +msgstr "Test di retrazione" msgid "Max flowrate" msgstr "Portata massima" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Altro..." - msgid "Tutorial" msgstr "Tutorial" msgid "Calibration help" msgstr "Aiuto per la calibrazione" -msgid "More calibrations" -msgstr "Più calibrazioni" - msgid "&Open G-code" msgstr "Apri G-code" @@ -4921,17 +5552,14 @@ msgid "Open a G-code file" msgstr "Apri un file G-code" msgid "Re&load from Disk" -msgstr "Ricaricare da disco" +msgstr "Ricarica dal disco" msgid "Reload the plater from disk" -msgstr "Ricarica piano da disco" +msgstr "Ricarica piatto dal disco" msgid "Export &Toolpaths as OBJ" msgstr "Esporta percorso strumen&to come OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Esporta percorso strumento come OBJ" - msgid "Open &Slicer" msgstr "Aprire &Studio" @@ -4955,16 +5583,19 @@ msgid "&Help" msgstr "&Aiuto" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "Esiste un file con lo stesso nome: %s. Vuoi sovrascriverlo?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "Esiste una configurazione con lo stesso nome: %s. Vuoi sovrascriverla?" msgid "Overwrite file" msgstr "Sovrascrivi file" +msgid "Overwrite config" +msgstr "Sovrascrivi configurazione" + msgid "Yes to All" msgstr "Sì a tutto" @@ -5021,7 +5652,7 @@ msgid "Filament Settings" msgstr "Impostazioni Filamento" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -5029,9 +5660,9 @@ msgid "" msgstr "" "Vuoi sincronizzare i tuoi dati personali da Bambu Cloud?\n" "Contiene le seguenti informazioni:\n" -"1. I presets del processo\n" -"2. I presets del filamento\n" -"3. I presets della stampante" +"1. I profili del processo\n" +"2. I profili del filamento\n" +"3. I profili della stampante" msgid "Synchronization" msgstr "Sincronizzazione" @@ -5043,10 +5674,11 @@ msgstr "" msgid "Player is malfunctioning. Please reinstall the system player." msgstr "" -"Lettore non funzionante correttamente. Reinstallare il lettore di sistema." +"Il lettore non funziona correttamente. Reinstallare il lettore di sistema." msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "Player non caricato; fai clic sul pulsante «play» per riprovare." +msgstr "" +"Lettore non caricato; fai clic sul pulsante \"Riproduci\" per riprovare." msgid "Please confirm if the printer is connected." msgstr "Verifica che la stampante sia collegata." @@ -5054,30 +5686,32 @@ msgstr "Verifica che la stampante sia collegata." msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." -msgstr "La stampante è in fase di download. Attendi il completamento." +msgstr "La stampante sta scaricando. Attendi il completamento e riprova." msgid "Printer camera is malfunctioning." -msgstr "La fotocamera della stampante non funziona correttamente." +msgstr "La telecamera della stampante non funziona correttamente." -msgid "Problem occured. Please update the printer firmware and try again." -msgstr "Si è verificato un problema. Aggiorna il firmware stampante e riprova." +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "" +"Si è verificato un problema. Aggiorna il firmware della stampante e riprova." msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." +"Il video in diretta tramite LAN è disabilitato. Si prega di abilitare il " +"video in diretta sullo schermo della stampante." msgid "Please enter the IP of printer to connect." -msgstr "Inserisci l'IP stampante da connettere." +msgstr "Inserisci l'IP della stampante da connettere." msgid "Initializing..." -msgstr "Inizializzazione ..." +msgstr "Inizializzazione..." msgid "Connection Failed. Please check the network and try again" msgstr "Connessione fallita. Controlla la rete e riprova" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Controlla la rete e riprova. Se il problema persiste prova ad aggiornare o " @@ -5086,21 +5720,21 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "La stampante è stata disconnessa e non può connettersi." -msgid "Stopped." -msgstr "Interrotto." +msgid "Video Stopped." +msgstr "Video Interrotto." msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "Connessione LAN non riuscita (impossibile avviare liveview)" +msgstr "Connessione LAN non riuscita (impossibile avviare il video in diretta)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" -"Per questa operazione è necessario Virtual Camera Tools!\n" +"Per questa operazione è necessario scaricare Strumenti Telecamera Virtuale!\n" "Vuoi installarli?" msgid "Downloading Virtual Camera Tools" -msgstr "Scaricare strumenti telecamera virtuale" +msgstr "Scaricamento Strumenti Telecamera Virtuale" msgid "" "Another virtual camera is running.\n" @@ -5113,7 +5747,7 @@ msgstr "" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" -msgstr "Inizializzazione Virtual Camera fallita (%s)!" +msgstr "Inizializzazione telecamera virtuale non riuscita (%s)!" msgid "Network unreachable" msgstr "Rete non raggiungibile" @@ -5122,7 +5756,10 @@ msgid "Information" msgstr "Informazione" msgid "Playing..." -msgstr "Riproduzione..." +msgstr "In riproduzione..." + +msgid "Loading..." +msgstr "Caricamento..." msgid "Year" msgstr "Anno" @@ -5142,6 +5779,9 @@ msgstr "Raggruppa i file per mese, prima i recenti." msgid "Show all files, recent first." msgstr "Mostra tutti i file, prima i recenti." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Passa ai file timelapse." @@ -5151,14 +5791,14 @@ msgstr "Video" msgid "Switch to video files." msgstr "Passare ai file video." -msgid "Switch to 3mf model files." -msgstr "Passa ai file modello 3mf." +msgid "Switch to 3MF model files." +msgstr "Passa ai file modello 3MF." msgid "Delete selected files from printer." msgstr "Elimina i file selezionati dalla stampante." msgid "Download" -msgstr "Download" +msgstr "Scarica" msgid "Download selected files from printer." msgstr "Scarica i file selezionati dalla stampante." @@ -5167,21 +5807,17 @@ msgid "Select" msgstr "Seleziona" msgid "Batch manage files." -msgstr "Gestione batch dei file." +msgstr "Gestione file in gruppi." msgid "Refresh" msgstr "Aggiorna" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "Ricarica l'elenco dei file dalla stampante." msgid "No printers." msgstr "Nessuna stampante." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Connessione non riuscita [%d]!" - msgid "Loading file list..." msgstr "Caricamento elenco file..." @@ -5189,31 +5825,18 @@ msgid "No files" msgstr "Nessun file" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "" -"Inizializzazione fallita (la connessione del dispositivo non è pronta)!" +msgstr "Caricamento non riuscito" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "Connessione LAN non riuscita (Impossibile visualizzare la scheda SD)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inizializzazione fallita (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5222,7 +5845,7 @@ msgid_plural "" msgstr[0] "" "Stai per eliminare %u file dalla stampante. Sei sicuro di continuare?" msgstr[1] "" -"Stai per eliminare %u i file dalla stampante. Sei sicuro di continuare?" +"Stai per eliminare %u file dalla stampante. Sei sicuro di continuare?" msgid "Delete files" msgstr "Elimina i file" @@ -5234,25 +5857,25 @@ msgstr "Vuoi eliminare il file '%s' dalla stampante?" msgid "Delete file" msgstr "Elimina file" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Recupero informazioni del modello..." msgid "Failed to fetch model information from printer." msgstr "Impossibile recuperare le informazioni del modello dalla stampante." msgid "Failed to parse model information." -msgstr "Impossibile analizzare le informazioni del modello" +msgstr "Impossibile analizzare le informazioni del modello." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -"Il file .gcode.3mf non contiene dati G-code. Taglialo con Snapmaker Orca ed " +"Il file .gcode.3mf non contiene dati G-code. Elaboralo con Snapmaker Orca ed " "esporta un nuovo file .gcode.3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." -msgstr "Il file \"%s\" è stato perso! Si prega di scaricarlo di nuovo." +msgstr "Il file '%s' è stato perso! Si prega di scaricarlo di nuovo." #, c-format, boost-format msgid "" @@ -5260,33 +5883,39 @@ msgid "" "Title: %s\n" msgstr "" "File: %s\n" -"Title: %s\n" +"Titolo: %s\n" msgid "Download waiting..." -msgstr "Download in attesa..." +msgstr "Scaricamento in attesa..." msgid "Play" -msgstr "Play" +msgstr "Riproduci" msgid "Open Folder" msgstr "Apri cartella" msgid "Download finished" -msgstr "Download completato" +msgstr "Scaricamento completato" #, c-format, boost-format msgid "Downloading %d%%..." msgstr "Scaricamento %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." +"Ricollegamento della stampante, l'operazione non può essere completata " +"immediatamente, riprovare più tardi." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." -msgstr "Il file non esiste" +msgstr "Il file non esiste." msgid "File checksum error. Please retry." msgstr "Errore di checksum del file. Si prega di riprovare." @@ -5294,13 +5923,47 @@ msgstr "Errore di checksum del file. Si prega di riprovare." msgid "Not supported on the current printer version." msgstr "Non supportato nella versione corrente della stampante." -msgid "Storage unavailable, insert SD card." -msgstr "Memoria non disponibile, inserire la scheda SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Codice errore: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Velocità:" @@ -5335,19 +5998,92 @@ msgid "Invert Yaw axis" msgstr "Inverti asse di imbardata" msgid "Invert Pitch axis" -msgstr "Inverti asse passo" +msgstr "Inverti asse di beccheggio" msgid "Invert Roll axis" msgstr "Inverti asse di rollio" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Cerca" + +msgid "My Device" +msgstr "Il mio dispositivo" + +msgid "Other Device" +msgstr "Altro dispositivo" + +msgid "Online" +msgstr "In Linea" + +msgid "Input access code" +msgstr "Inserisci codice di accesso" + +msgid "Can't find my devices?" +msgstr "Non riesci a trovare i dispositivi?" + +msgid "Log out successful." +msgstr "Disconnessione riuscita." + +msgid "Offline" +msgstr "Non in linea" + +msgid "Busy" +msgstr "Occupato" + +msgid "Modifying the device name" +msgstr "Modifica nome del dispositivo" + +msgid "Name is invalid;" +msgstr "Nome non valido;" + +msgid "illegal characters:" +msgstr "caratteri illegali:" + +msgid "illegal suffix:" +msgstr "suffisso illegale:" + +msgid "The name is not allowed to be empty." +msgstr "Il campo nome non può essere vuoto." + +msgid "The name is not allowed to start with space character." +msgstr "Il nome non può iniziare con uno spazio." + +msgid "The name is not allowed to end with space character." +msgstr "Il nome non può terminare con uno spazio." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Associa con codice PIN" + +msgid "Bind with Access Code" +msgstr "Associa con il codice di accesso" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Avanzamento della stampa" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Ferma" msgid "Layer: N/A" -msgstr "Layer: N/D" +msgstr "Strato: N/D" msgid "Clear" msgstr "Cancella" @@ -5374,13 +6110,13 @@ msgid "Rate" msgstr "Vota" msgid "Camera" -msgstr "Camera" +msgstr "Telecamera" -msgid "SD Card" -msgstr "MicroSD" +msgid "Storage" +msgstr "" msgid "Camera Setting" -msgstr "Impostazioni camera" +msgstr "Impostazioni Telecamera" msgid "Switch Camera View" msgstr "Cambia inquadratura" @@ -5389,99 +6125,114 @@ msgid "Control" msgstr "Controllo" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "Parti Stampante" msgid "Print Options" -msgstr "Opzioni stampa" - -msgid "100%" -msgstr "100%" +msgstr "Opzioni Stampa" msgid "Lamp" msgstr "Lamp" -msgid "Aux" -msgstr "Ausiliario" - -msgid "Cham" -msgstr "Camera" - msgid "Bed" -msgstr "Piano" +msgstr "Piatto" msgid "Debug Info" msgstr "Informazioni di debug" -msgid "No SD Card" -msgstr "Nessuna scheda microSD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "microSD anomala" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Annulla la stampa" -msgid "Are you sure you want to cancel this print?" -msgstr "Sei sicuro di voler annullare la stampa?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "La stampante è occupata con altra attività di stampa." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." -msgstr "Downloading..." +msgstr "Scaricamento..." msgid "Cloud Slicing..." -msgstr "Slicing in cloud..." +msgstr "Elaborazone nel cloud..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "Ci sono %s attività davanti nella coda di slicing del cloud." +msgstr "Ci sono %s attività davanti nella coda di elaborazione del cloud." #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "Strato: %s" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "Strato: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Si prega di riscaldare l'ugello a oltre 170 gradi prima di caricare o " -"scaricare il filamento." +"Si prega di riscaldare l'ugello a oltre 170°C prima di caricare o scaricare " +"il filamento." -msgid "Still unload" -msgstr "Scarica ancora" - -msgid "Still load" -msgstr "Carica ancora" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" -msgstr "Seleziona uno slot AMS prima di calibrare." +msgstr "Seleziona uno slot AMS prima di calibrare" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " "unload the filament and try again." msgstr "" "Impossibile leggere le informazioni sul filamento: il filamento è caricato " -"nella testa di stampa. Scaricare il filamento e riprovare." +"nella testina. Scaricare il filamento e riprovare." msgid "This only takes effect during printing" msgstr "Questo ha effetto solo in fase di stampa" msgid "Silent" -msgstr "Silent" +msgstr "Silenzioso" msgid "Standard" msgstr "Standard" msgid "Sport" -msgstr "Sport" +msgstr "Sportivo" msgid "Ludicrous" -msgstr "Ludicrous" +msgstr "Ridicolmente veloce" -msgid "Can't start this without SD card." -msgstr "Impossibile iniziare senza scheda MicroSD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Valutare il profilo di stampa" @@ -5504,13 +6255,10 @@ msgstr "Invia" msgid "Please click on the star first." msgstr "Fare clic prima sulla stella." -msgid "InFo" -msgstr "Info" - msgid "Get oss config failed." -msgstr "Ottenere la configurazione di oss non riuscita." +msgstr "Impossibile ottenere la configurazione oss." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Carica foto" msgid "Number of images successfully uploaded" @@ -5520,12 +6268,12 @@ msgid " upload failed" msgstr " Caricamento non riuscito" msgid " upload config prase failed\n" -msgstr " Caricamento della configurazione prase non riuscita\n" +msgstr " Caricamento della configurazione non riuscita\n" msgid " No corresponding storage bucket\n" msgstr " Nessun secchio di stoccaggio corrispondente\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " non può essere aperto\n" msgid "" @@ -5538,27 +6286,26 @@ msgstr "" "\n" msgid "info" -msgstr "info" +msgstr "informazioni" msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "" -"Sincronizzazione dei risultati di stampa. Riprova qualche secondo dopo." +msgstr "Sincronizzazione dei risultati di stampa. Riprova tra qualche secondo." msgid "Upload failed\n" msgstr "Caricamento non riuscito\n" msgid "obtaining instance_id failed\n" -msgstr "ottenere instance_id non è riuscito\n" +msgstr "ottenimento di instance_id non riuscito\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" -"Il risultato del tuo commento non può essere caricato per alcuni motivi. " -"Come segue:\n" +"Il risultato del tuo commento non può essere caricato per i seguenti " +"motivi:\n" "\n" -"Codice di errore: " +" Codice di errore: " msgid "error message: " msgstr "messaggio d'errore: " @@ -5566,38 +6313,49 @@ msgstr "messaggio d'errore: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" -"Vuoi reindirizzare alla pagina web per la valutazione?" +"\n" +"Vuoi essere reindirizzato alla pagina web per la valutazione?" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" -"Alcune delle tue immagini non sono state caricate. Vuoi reindirizzare alla " -"pagina web per la valutazione?" +"Alcune delle tue immagini non sono state caricate. Vuoi essere reindirizzato " +"alla pagina web per la valutazione?" msgid "You can select up to 16 images." msgstr "È possibile selezionare fino a 16 immagini." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" -"È necessario almeno un record di stampa riuscito di questo profilo di " -"stampa \n" +"Per questo profilo di stampa è richiesto almeno un registro di stampa " +"riuscito \n" "per dare una valutazione positiva (4 o 5 stelle)." msgid "Status" msgstr "Stato" +msgctxt "Firmware" msgid "Update" -msgstr "Aggiorna" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Non mostrare più" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "errore %s" @@ -5616,7 +6374,7 @@ msgstr "%s ha un avviso" #, c-format, boost-format msgid "%s info" -msgstr "Informazioni %s " +msgstr "Informazioni %s" #, c-format, boost-format msgid "%s information" @@ -5625,34 +6383,65 @@ msgstr "%s informazioni" msgid "Skip" msgstr "Salta" -msgid "Newer 3mf version" -msgstr "Versione 3mf più recente" +msgid "Newer 3MF version" +msgstr "Versione 3MF più recente" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" +"La versione del file 3MF è in Beta ed è più recente della versione corrente " +"di Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "" +msgstr "Se vuoi provare Snapmaker Orca Beta, puoi cliccare su" msgid "Download Beta Version" -msgstr "Scarica la versione beta" +msgstr "Scarica la versione Beta" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" +"La versione del file 3MF è più recente della versione corrente di Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" +"Aggiornando Snapmaker Orca potresti abilitare tutte le funzionalità nel file 3MF." msgid "Current Version: " -msgstr "Versione corrente:" +msgstr "Versione corrente: " msgid "Latest Version: " msgstr "Ultima versione: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" -msgstr "Not for now" +msgstr "Non per adesso" + +msgid "Server Exception" +msgstr "Eccezione del server" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Il server non è in grado di rispondere. Clicca sul collegamento sottostante " +"per controllare lo stato del server." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Se il server è malfunzionante, è possibile utilizzare temporaneamente la " +"stampa non in linea o tramite rete locale." + +msgid "How to use LAN only mode" +msgstr "Come utilizzare la modalità Solo LAN" + +msgid "Don't show this dialog again" +msgstr "Non mostrare più questa finestra di dialogo" msgid "3D Mouse disconnected." msgstr "Mouse 3D disconnesso." @@ -5667,13 +6456,13 @@ msgid "Integration was successful." msgstr "L'integrazione è avvenuta con successo." msgid "Integration failed." -msgstr "Integrazione fallita." +msgstr "Integrazione non riuscita." msgid "Undo integration was successful." msgstr "Annullamento integrazione riuscita." msgid "New network plug-in available." -msgstr "Nuovo plug-in di network disponibile." +msgstr "Nuovo modulo di rete disponibile." msgid "Details" msgstr "Dettagli" @@ -5706,19 +6495,25 @@ msgstr "Rimuovi l'hardware in modo sicuro." msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d L'oggetto ha supporti personalizzati." -msgstr[1] "%1$d Objects have custom supports." +msgstr[1] "%1$d Gli oggetti hanno supporti personalizzati." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d L'oggetto ha una pittura a colori." -msgstr[1] "%1$d Objects have color painting." +msgstr[0] "%1$d L'oggetto ha una pittura di colore." +msgstr[1] "%1$d Gli oggetti hanno una pittura di colore." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d oggetto è stato caricato come parte di un oggetto tagliato." -msgstr[1] "%1$d oggetti sono stati caricati come parti di un oggetto tagliato" +msgstr[1] "%1$d oggetti sono stati caricati come parti di un oggetto tagliato." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" msgid "ERROR" msgstr "ERRORE" @@ -5739,16 +6534,16 @@ msgid "Error:" msgstr "Errore:" msgid "Warning:" -msgstr "Attenzione:" +msgstr "Avviso:" -msgid "Export successfully." -msgstr "Esportazione riuscita." +msgid "Exported successfully" +msgstr "Esportazione riuscita" msgid "Model file downloaded." msgstr "File del modello scaricato." msgid "Serious warning:" -msgstr "Avvertimento serio:" +msgstr "Avviso serio:" msgid " (Repair)" msgstr " (Ripara)" @@ -5757,16 +6552,16 @@ msgid " Click here to install it." msgstr " Clicca per installarlo." msgid "WARNING:" -msgstr "ATTENZIONE:" +msgstr "AVVISO:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Il modello necessita di supporti! Abilita i materiali di supporto." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Sovrapposizione del percorso G-code" msgid "Support painting" -msgstr "Pittura Supporti" +msgstr "Dipingi supporti" msgid "Color painting" msgstr "Pittura a colori" @@ -5775,7 +6570,7 @@ msgid "Cut connectors" msgstr "Taglia connettori" msgid "Layers" -msgstr "Layer" +msgstr "Strati" msgid "Range" msgstr "Intervallo" @@ -5784,8 +6579,8 @@ msgid "" "The application cannot run normally because OpenGL version is lower than " "2.0.\n" msgstr "" -"L'applicazione non può essere eseguita normalmente perché la versione OpenGL " -"è precedente alla 2.0.\n" +"L'applicazione non può essere eseguita normalmente perché la versione di " +"OpenGL è precedente alla 2.0.\n" msgid "Please upgrade your graphics card driver." msgstr "Aggiorna i driver della scheda grafica." @@ -5812,12 +6607,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferiore" -msgid "Enable AI monitoring of printing" -msgstr "Abilita monitoraggio AI della stampa" - -msgid "Sensitivity of pausing is" -msgstr "La sensibilità pausa è" - msgid "Enable detection of build plate position" msgstr "Abilita rilevamento posizione del piatto" @@ -5825,39 +6614,111 @@ msgid "" "The localization tag of build plate is detected, and printing is paused if " "the tag is not in predefined range." msgstr "" -"Il tag di localizzazione del piatto verrà rilevato e la stampa verrà messa " -"in pausa se il tag non rientra nell'intervallo predefinito." +"L'etichetta di localizzazione del piatto è stato rilevata e la stampa verrà " +"messa in pausa, se l'etichetta non rientra nell'intervallo predefinito." -msgid "First Layer Inspection" -msgstr "Ispezione del primo layer" +msgid "Build Plate Detection" +msgstr "" -msgid "Auto-recovery from step loss" -msgstr "Recupero automatico perdita passi" +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" -msgid "Allow Prompt Sound" -msgstr "Consenti suono di richiesta" +msgid "AI Detections" +msgstr "" -msgid "Filament Tangle Detect" -msgstr "Rilevamento del groviglio del filamento" +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Abilita monitoraggio IA della stampa" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "Rilevamento ostruzione ugello" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + +msgid "First Layer Inspection" +msgstr "Ispezione del primo strato" + +msgid "Auto-recovery from step loss" +msgstr "Recupero automatico perdita passaggi" + +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + +msgid "Allow Prompt Sound" +msgstr "Consenti suono di avviso" + +msgid "Filament Tangle Detect" +msgstr "Rilevamento groviglio filamento" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" +"Controllare se l'ugello è ostruito da filamenti o altri corpi estranei." msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Tipo di ugello" -msgid "Stainless Steel" -msgstr "Acciaio inox" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Acciaio temprato" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Acciaio inossidabile" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Globale" @@ -5869,47 +6730,75 @@ msgid "Advance" msgstr "Avanzato" msgid "Compare presets" -msgstr "Confronta i preset" +msgstr "Confronta i profili" msgid "View all object's settings" -msgstr "Visualizza tutte le impostazioni oggetto" +msgstr "Visualizza tutte le impostazioni dell'oggetto" msgid "Material settings" -msgstr "" +msgstr "Impostazioni materiale" msgid "Remove current plate (if not last one)" -msgstr "Rimuovere la piastra corrente (se non l'ultima)" +msgstr "Rimuovi il piatto corrente (se non è l'ultimo)" msgid "Auto orient objects on current plate" -msgstr "Orienta automaticamente gli oggetti sulla piastra corrente" +msgstr "Orienta automaticamente gli oggetti sul piatto corrente" msgid "Arrange objects on current plate" -msgstr "Disporre gli oggetti sulla piastra corrente" +msgstr "Disponi gli oggetti sul piatto corrente" msgid "Unlock current plate" -msgstr "Sblocca la piastra corrente" +msgstr "Sblocca il piatto corrente" msgid "Lock current plate" -msgstr "Piastra corrente di blocco" +msgstr "Blocca il piatto corrente" -msgid "Edit current plate name" -msgstr "Modificare il nome del piatto corrente" - -msgid "Move plate to the front" +msgid "Filament grouping" msgstr "" +msgid "Edit current plate name" +msgstr "Modifica il nome del piatto corrente" + +msgid "Move plate to the front" +msgstr "Sposta il piatto in avanti" + msgid "Customize current plate" -msgstr "Personalizza la piastra corrente" +msgstr "Personalizza il piatto corrente" + +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" #, boost-format msgid " plate %1%:" -msgstr " Piatto %1%:" +msgstr " piatto %1%:" msgid "Invalid name, the following characters are not allowed:" msgstr "Nome non valido, i seguenti caratteri non sono consentiti:" msgid "Sliced Info" -msgstr "Informazioni processo" +msgstr "Informazioni elaborazioni" msgid "Used Filament (m)" msgstr "Filamento usato (m)" @@ -5924,82 +6813,116 @@ msgid "Used Materials" msgstr "Materiali usati" msgid "Estimated time" -msgstr "Estimated time" +msgstr "Tempo stimato" msgid "Filament changes" msgstr "Cambi filamento" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" -msgstr "Clicca per modificare il preset" +msgstr "Clicca per modificare il profilo" msgid "Connection" msgstr "Connessione" -msgid "Bed type" -msgstr "Tipo di piatto" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Volumi di spurgo" msgid "Add one filament" -msgstr "Aggiungere un filamento" +msgstr "Aggiungi un filamento" msgid "Remove last filament" msgstr "Rimuovi ultimo filamento" msgid "Synchronize filament list from AMS" -msgstr "Sincronizza l'elenco filamenti da AMS" +msgstr "Sincronizza l'elenco filamenti dall'AMS" msgid "Set filaments to use" msgstr "Imposta filamenti da usare" msgid "Search plate, object and part." -msgstr "Cerca piastra, oggetto e parte." +msgstr "Cerca piatto, oggetto e parte." msgid "Pellets" +msgstr "Granuli" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "" -"Nessun filamento AMS. Selezionare una stampante nella pagina 'Dispositivo' " -"per caricare le informazioni AMS." +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Filamenti non compatibili, la sincronizzazione non è stata eseguita." msgid "Sync filaments with AMS" msgstr "Sincronizza filamenti con AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"La sincronizzazione filamenti con AMS eliminerà tutti i preset e i colori " -"dei filamenti attualmente selezionati. Vuoi continuare?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"È già stata effettuata una sincronizzazione; si desidera sincronizzare solo " -"le modifiche o tutto?" - -msgid "Sync" -msgstr "Sincronizza" - -msgid "Resync" -msgstr "Risincronizza" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "" -"Non ci sono filamenti compatibili, la sincronizzazione non viene eseguita." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Ci sono alcuni filamenti sconosciuti mappati su un preset generico. Aggiorna " -"Snapmaker Orca o riavvia Snapmaker Orca per verificare se è presente un " -"aggiornamento delle impostazioni di sistema." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6007,15 +6930,15 @@ msgstr "Vuoi salvare le modifiche a \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Smontato con successo. Il dispositivo %s (%s) può ora essere rimosso dal " "computer in sicurezza." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Espulsione del dispositivo %s (%s) non riuscita." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "" @@ -6029,27 +6952,30 @@ msgid "" "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"L'attuale temperatura del piano riscaldato è relativamente alta. L'ugello " -"potrebbe essere ostruito quando si stampa questo filamento in un involucro " -"chiuso. Si prega di aprire lo sportello anteriore e/o rimuovere il vetro " -"superiore." +"L'attuale temperatura del piano riscaldato è relativamente alta. Se si " +"stampa questo filamento in uno spazio chiuso, l'ugello potrebbe ostruirsi. " +"Si prega di aprire lo sportello anteriore e/o rimuovere il vetro superiore." msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"La durezza del nozzle richiesta dal filamento è superiore a quella del " -"nozzle predefinito della stampante. Si prega di sostituire il nozzle " -"hardened o il filamento, altrimenti il nozzle si rovinerà o potrebbe " -"danneggiarsi." +"La resistenza dell'ugello richiesta dal filamento è superiore a quella " +"dell'ugello predefinito della stampante. Si prega di sostituire l'ugello o " +"il filamento, altrimenti l'ugello potrebbe logorarsi e danneggiarsi." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " "It is recommended to change to smooth mode." msgstr "" "L'attivazione della fotografia timelapse tradizionale può causare " -"imperfezioni della superficie. Si consiglia di passare alla modalità smooth." +"imperfezioni sulla superficie. Si consiglia di passare alla modalità fluida." + +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" msgid "Expand sidebar" msgstr "Espandi barra laterale" @@ -6057,22 +6983,39 @@ msgstr "Espandi barra laterale" msgid "Collapse sidebar" msgstr "Riduci barra laterale" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Caricamento file: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "Il 3mf non proviene da Snapmaker Orca, carica solo dati geometrici." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "" +"Il 3MF non è supportato da Snapmaker Orca. Saranno caricati solo i dati " +"geometrici." -msgid "Load 3mf" -msgstr "Carica 3mf" +msgid "Load 3MF" +msgstr "Carica 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"Versione del 3mf %s è più recente %s della versione %s, trovate le seguenti " +"Il 3MF versione %s è più recente di %s versione %s. Trovate le seguenti " "chiavi non riconosciute:" msgid "You'd better upgrade your software.\n" @@ -6080,51 +7023,59 @@ msgstr "Devi aggiornare il software.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Versione del 3mf %s è più recente della versione %s di %s, si consiglia di " +"Il 3MF versione %s è più recente di %s versione %s. Si consiglia di " "aggiornare il software." -msgid "Invalid values found in the 3mf:" -msgstr "Valori non validi trovati in 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"Il 3MF è stato generato da una vecchia versione di Snapmaker Orca, " +"caricando solo i dati geometrici." + + +msgid "Invalid values found in the 3MF:" +msgstr "Valori non validi trovati nell'3MF:" msgid "Please correct them in the param tabs" -msgstr "Si prega di correggerli nella scheda dei Parametri" +msgstr "Si prega di correggerli nella scheda dei parametri" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"Il 3mf ha i seguenti codici G modificati nei preset del filamento o della " +"Il 3MF ha i seguenti G-code modificati nei profili del filamento o della " "stampante:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Si prega di confermare che questi G-code modificati sono sicuri per evitare " "danni alla macchina!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "G-code Modificati" -msgid "The 3mf has following customized filament or printer presets:" -msgstr "" -"Il 3mf ha i seguenti filamenti personalizzati o preimpostazioni della " -"stampante:" +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "Il 3MF ha i seguenti profili personalizzati per filamenti o stampanti:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Si prega di confermare che i G-code all'interno di queste preimpostazioni " -"sono sicuri per evitare danni alla macchina!" +"Si prega di confermare che i G-code all'interno di questi profili sono " +"sicuri per evitare danni alla macchina!" msgid "Customized Preset" -msgstr "Preset personalizzato" +msgstr "Profilo personalizzato" -msgid "Name of components inside step file is not UTF8 format!" +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "" -"Il nome/i del componente all'interno del file step non è in formato UTF8!" +"Il nome dei componenti all'interno del file STEP non è in formato UTF8!" msgid "The name may show garbage characters!" msgstr "" @@ -6174,15 +7125,25 @@ msgstr "Caricare questi file come un singolo oggetto con più parti?\n" msgid "Object with multiple parts was detected" msgstr "È stato rilevato un oggetto con più parti" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Il file non contiene dati geometrici." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "L'oggetto sembra troppo grande. Vuoi ridimensionarlo per adattarlo " -"automaticamente al piatto di stampa?" +"automaticamente al piano di stampa?" msgid "Object too large" msgstr "Oggetto troppo grande" @@ -6194,7 +7155,7 @@ msgid "Export AMF file:" msgstr "Esporta file AMF:" msgid "Save file as:" -msgstr "Salva come:" +msgstr "Salva con nome:" msgid "Export OBJ file:" msgstr "Esporta file OBJ:" @@ -6208,7 +7169,7 @@ msgstr "" "Vuoi sostituirlo?" msgid "Confirm Save As" -msgstr "Confirm Salva con nome" +msgstr "Conferma Salva con nome" msgid "Delete object which is a part of cut object" msgstr "Elimina l'oggetto che fa parte dell'oggetto tagliato" @@ -6243,6 +7204,34 @@ msgstr "Seleziona nuovo file" msgid "File for the replace wasn't selected" msgstr "Il file per la sostituzione non è stato selezionato" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Seleziona file" @@ -6259,43 +7248,54 @@ msgid "Unable to reload:" msgstr "Impossibile ricaricare:" msgid "Error during reload" -msgstr "Errore durante il ri-caricamento" +msgstr "Errore durante il ricaricamento" msgid "There are warnings after slicing models:" msgstr "Ci sono avvisi dopo aver elaborato i modelli:" msgid "warnings" -msgstr "Avvisi" +msgstr "avvisi" msgid "Invalid data" msgstr "Dati non validi" msgid "Slicing Canceled" -msgstr "Slicing Annullato" +msgstr "Elaborazone Annullata" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Slicing Piatto %d" +msgstr "Elaborazone Piatto %d" msgid "Please resolve the slicing errors and publish again." -msgstr "Risolvi gli errori di slicing e pubblica nuovamente." +msgstr "Risolvi gli errori di elaborazone e pubblica nuovamente." msgid "" "Network Plug-in is not detected. Network related features are unavailable." msgstr "" -"Il plug-in di rete non è stato rilevato. Le funzioni di rete non sono " +"Il modulo di rete non è stato rilevato. Le funzioni di rete non sono " "disponibili." msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Modalità solo anteprima:\n" -"Il file caricato contiene solo G-code, non può accedere alla pagina Prepara" +"Il file caricato contiene solo G-code, non può accedere alla pagina Prepara." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "" -"È possibile conservare i preset modificati per il nuovo progetto o eliminarli" +"È possibile conservare i profili modificati per il nuovo progetto o scartarli" msgid "Creating a new project" msgstr "Creazione nuovo progetto" @@ -6318,17 +7318,17 @@ msgstr "Salva progetto" msgid "Importing Model" msgstr "Importazione del modello" -msgid "prepare 3mf file..." -msgstr "preparazione file 3mf..." +msgid "prepare 3MF file..." +msgstr "preparazione file 3MF..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "Scaricamento non riuscito; formato file sconosciuto." -msgid "downloading project ..." -msgstr "Download progetto..." +msgid "downloading project..." +msgstr "scaricamento progetto..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "Scaricamento non riuscito; errore dimensione file." #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6338,8 +7338,22 @@ msgid "" "Importing to Snapmaker Orca failed. Please download the file and manually " "import it." msgstr "" -"L'importazione di Snapmaker Orca non è riuscita. Si prega di scaricare il file " -"e importarlo manualmente." +"L'importazione in Snapmaker Orca non è riuscita. Si prega di scaricare il file e " +"importarlo manualmente." + +msgid "INFO:" +msgstr "INFORMAZIONI:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Nessun valore di accelerazione fornito per la calibrazione. Verrà utilizzato " +"il valore di accelerazione predefinito " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Nessun valore di velocità fornito per la calibrazione. Verrà utilizzato il " +"valore di velocità ottimale predefinito " msgid "Import SLA archive" msgstr "Importa archivio SLA" @@ -6347,16 +7361,16 @@ msgstr "Importa archivio SLA" msgid "The selected file" msgstr "Il file selezionato" -msgid "does not contain valid gcode." -msgstr "non contiene un g-code valido." +msgid "does not contain valid G-code." +msgstr "non contiene un G-code valido." msgid "Error occurs while loading G-code file" -msgstr "Si è verificato un errore durante il caricamento del file G-code." +msgstr "Si è verificato un errore durante il caricamento del file G-code" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "Il caricamento di un archivio zip sul percorso %1% non è riuscito." +msgstr "Il caricamento di un archivio ZIP sul percorso %1% non è riuscito." #. TRN: First argument = path to file, second argument = error description #, boost-format @@ -6387,10 +7401,10 @@ msgstr "È possibile aprire un solo file G-code alla volta." msgid "G-code loading" msgstr "Caricamento G-code" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "I file e i modelli G-code non possono essere caricati insieme!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Impossibile aggiungere modelli in modalità anteprima!" msgid "All objects will be removed, continue?" @@ -6408,10 +7422,10 @@ msgid "Copies of the selected object" msgstr "Copie dell'oggetto selezionato" msgid "Save G-code file as:" -msgstr "Salva il file G-code come:" +msgstr "Salva il file G-code con nome:" msgid "Save SLA file as:" -msgstr "Salva il file SLA come:" +msgstr "Salva il file SLA con nome:" msgid "The provided file name is not valid." msgstr "Il nome del file fornito non è valido." @@ -6420,65 +7434,63 @@ msgid "The following characters are not allowed by a FAT file system:" msgstr "I seguenti caratteri non sono permessi da un file system FAT:" msgid "Save Sliced file as:" -msgstr "Salva file elaborato come:" +msgstr "Salva file elaborato con nome:" #, c-format, boost-format msgid "" "The file %s has been sent to the printer's storage space and can be viewed " "on the printer." msgstr "" -"Il file %s è stato inviato allo spazio di memoria della stampante e può " -"essere visualizzato sulla stampante." +"Il file %s è stato inviato alla memoria della stampante e può essere " +"visualizzato da lì." + +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." +"Impossibile eseguire un'operazione booleana sulle maglie del modello. " +"Saranno mantenute solo le parti positive. Puoi correggere le maglie " +"poligonali e riprovare." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "Motivo: la parte \"%1%\" è vuota." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "Motivo: la parte \"%1%\" non delimita un volume." #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "Motivo: la parte \"%1%\" si autointerseca." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "Motivo: \"%1%\" e un'altra parte non ha intersezioni." msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Impossibile eseguire operazioni booleane sulle mesh del modello. Verranno " +"Impossibile eseguire operazioni booleane sulle maglie del modello. Verranno " "esportate solo le parti positive." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Sei sicuro di voler memorizzare gli SVG originali con i loro percorsi locali " -"nel file 3MF?\n" -"Se premi \"NO\", tutti gli SVG del progetto non saranno più modificabili." - -msgid "Private protection" -msgstr "Protezione privata" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" -"La stampante è pronta? La piastra di stampa è in posizione, vuota e pulita?" +"La stampante è pronta? Il piano di stampa è in posizione, vuoto e pulito?" msgid "Upload and Print" msgstr "Carica e Stampa" +msgid "Abnormal print file data. Please slice again" +msgstr "Dati file di stampa anormali. Eseguire nuovamente l'elaborazione" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6491,7 +7503,7 @@ msgid "Send G-code" msgstr "Invia G-code" msgid "Send to printer" -msgstr "Manda alla stampante" +msgstr "Invia alla stampante" msgid "Custom supports and color painting were removed before repairing." msgstr "" @@ -6501,15 +7513,40 @@ msgstr "" msgid "Optimize Rotation" msgstr "Ottimizza rotazione" -msgid "Invalid number" -msgstr "Numero non valido" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Impostazioni Piatto" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Numero attuale di parti selezionate: %1%\n" +msgstr "Numero attuale di parti selezionate: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" @@ -6543,9 +7580,6 @@ msgstr "Volume: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Triangoli: %1%\n" -msgid "Tips:" -msgstr "Suggerimenti:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6555,16 +7589,42 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"Piatto %d: %s non è consigliato per l’utilizzo del filamento %s (%s). Se " +"desideri continuare, imposta la temperatura del piatto per questo filamento " +"su un numero diverso da zero." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Piatto% d: %s non è consigliato per l’utilizzo del filamento %s (%s). Se " -"desideri continuare, imposta la temperatura del piano di questo filamento su " -"un numero diverso da zero." msgid "Switching the language requires application restart.\n" -msgstr "Il cambio lingua richiede il riavvio dell'applicazione.\n" +msgstr "Il cambio della lingua richiede il riavvio dell'applicazione.\n" msgid "Do you want to continue?" msgstr "Vuoi continuare?" @@ -6573,75 +7633,76 @@ msgid "Language selection" msgstr "Selezione lingua" msgid "Switching application language while some presets are modified." -msgstr "Cambio lingua applicazione durante la modifica di alcuni preset." +msgstr "Cambio lingua applicazione durante la modifica di alcuni profili." msgid "Changing application language" msgstr "Modifica lingua applicazione" +msgid "Asia-Pacific" +msgstr "Asia-Pacifico" + +msgid "China" +msgstr "Cina" + +msgid "Europe" +msgstr "Europa" + +msgid "North America" +msgstr "Nord America" + +msgid "Others" +msgstr "Altro" + msgid "Changing the region will log out your account.\n" -msgstr "La modifica della regione ti disconnetterà dal tuo account.\n" +msgstr "La modifica della regione ti disconnetterà dal tuo proflo utente.\n" msgid "Region selection" -msgstr "Selezione Paese" +msgstr "Selezione Regione" -msgid "Second" -msgstr "Secondo" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Periodo di backup in secondi." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "Sfoglia" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "Scegliere la directory di download" msgid "Associate" -msgstr "" +msgstr "Associa" msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" +msgstr "con Snapmaker Orca in modo che possa aprire i modelli da" msgid "Current Association: " -msgstr "" +msgstr "Associazione attuale: " msgid "Current Instance" -msgstr "" +msgstr "Istanza attuale" msgid "Current Instance Path: " -msgstr "" +msgstr "Percorso istanza attuale: " -msgid "General Settings" -msgstr "Impostazioni generali" - -msgid "Asia-Pacific" -msgstr "Asia-Pacific" - -msgid "China" -msgstr "China" - -msgid "Europe" -msgstr "Europe" - -msgid "North America" -msgstr "North America" - -msgid "Others" -msgstr "Altro" - -msgid "Login Region" -msgstr "Regione di accesso" - -msgid "Stealth Mode" -msgstr "Modalità invisibile" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" - -msgid "Enable network plugin" -msgstr "Abilita plugin di rete" - -msgid "Check for stable updates only" -msgstr "Verifica solo la disponibilità di aggiornamenti stabili" +msgid "General" +msgstr "Generale" msgid "Metric" msgstr "Metrico" @@ -6652,8 +7713,20 @@ msgstr "Imperiale" msgid "Units" msgstr "Unità" +msgid "Home" +msgstr "Pagina iniziale" + +msgid "Default page" +msgstr "Pagina predefinita" + +msgid "Set the page opened on startup." +msgstr "Imposta la pagina aperta all'avvio." + +msgid "Enable dark mode" +msgstr "Attiva modalità Scura" + msgid "Allow only one Snapmaker Orca instance" -msgstr "" +msgstr "Consenti solo un'istanza di Snapmaker Orca" msgid "" "On OSX there is always only one instance of app running by default. However " @@ -6670,30 +7743,140 @@ msgid "" "same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" +"Se questa opzione è abilitata, quando si avvia Snapmaker Orca e un'altra istanza " +"di Snapmaker Orca è già in esecuzione, verrà riattivata tale istanza." -msgid "Home" -msgstr "Home" +msgid "Show splash screen" +msgstr "Mostra schermata iniziale" -msgid "Default Page" -msgstr "Pagina predefinita" +msgid "Show the splash screen during startup." +msgstr "Mostra la schermata iniziale durante l'avvio." -msgid "Set the page opened on startup." -msgstr "Imposta la pagina aperta all'avvio." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Carica tutto" + +msgid "Ask When Relevant" +msgstr "Chiedi quando pertinente" + +msgid "Always Ask" +msgstr "Chiedi sempre" + +msgid "Load Geometry Only" +msgstr "Carica solo la geometria" + +msgid "Load behaviour" +msgstr "Comportamento di caricamento" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"Quando si apre un file 3MF, è necessario caricare le impostazioni della " +"stampante/filamento/processo?" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Nessun avviso durante il caricamento di 3MF con G-code modificati" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Backup automatico" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Esegui periodicamente una copia di sicurezza del tuo progetto per " +"facilitarne il ripristino dopo un arresto anomalo." + +msgid "Preset" +msgstr "Profilo" + +msgid "Remember printer configuration" +msgstr "Ricorda la configurazione della stampante" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Se abilitato, Orca ricorderà e cambierà automaticamente la configurazione " +"del filamento/processo per ciascuna stampante." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Gestione multi-dispositivo" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Abilitando questa opzione, puoi inviare un'attività a più dispositivi " +"contemporaneamente e gestire più dispositivi." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Tutto" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Disposizione automatica del piatto dopo la clonazione" msgid "Touchpad" -msgstr "" +msgstr "Pannello tattile" msgid "Camera style" -msgstr "" +msgstr "Stile fotocamera" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +"Seleziona lo stile di navigazione della visuale.\n" +"Predefinito: Tasto sinistro del mouse+movimento per la rotazione, tasto " +"destro o centrale del mouse+movimento per la panoramica.\n" +"Pannello tattile: Alt+movimento per ruotare, Maiusc+movimento per scorrere." + +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" msgid "Zoom to mouse position" -msgstr "Zoom posizione del mouse" +msgstr "Ingrandisci sulla posizione del mouse" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " @@ -6703,173 +7886,181 @@ msgstr "" "anziché verso il centro della finestra 2D." msgid "Use free camera" -msgstr "Usa l'inquadratura libera" +msgstr "Usa la visuale libera" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" -"Se attivo, usa la visuale libera. Se non attivo, usa la visuale vincolata." +"Se abilitato, usa la visuale libera. Altrimenti, usa la visuale vincolata." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Scambia i pulsanti del mouse per ruotare e spostare" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Se abilitato, inverte le funzioni di panoramica e rotazione dei pulsanti " +"sinistro e destro del mouse." msgid "Reverse mouse zoom" -msgstr "" +msgstr "Inverti zoom del mouse" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" +"Se abilitato, inverte la direzione dell'ingrandimento con la rotellina del " +"mouse." -msgid "Show splash screen" -msgstr "Mostra splash screen" - -msgid "Show the splash screen during startup." -msgstr "Mostra la schermata iniziale durante l'avvio." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Mostra \"Suggerimento del giorno\" dopo l'avvio" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Se abilitato, all'avvio vengono visualizzati suggerimenti utili." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "" -"Volumi di Spurgo: Calcola automaticamente ogni volta che il colore cambia." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Se abilitato, calcola automaticamente ogni volta che il colore cambia." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" +msgid "Clear my choice on..." msgstr "" -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +msgid "Unsaved projects" msgstr "" -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" -msgstr "Rete" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Sincronizzazione automatica preset utente (stampante/filamento/processo)" - -msgid "User Sync" -msgstr "User Sync" - -msgid "Update built-in Presets automatically." -msgstr "Aggiorna automaticamente i preset." - -msgid "System Sync" -msgstr "Sincronizzazione sistema" - -msgid "Clear my choice on the unsaved presets." -msgstr "Cancella la mia scelta sui preset non salvati." - -msgid "Associate files to Snapmaker Orca" -msgstr "Associate files to Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Associare file .3mf a Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .3mf." - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Associate .stl files to Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .stl." - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Associate .step/.stp files to Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .step." - -msgid "Associate web links to Snapmaker Orca" -msgstr "" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "Numero massimo di progetti recenti" - -msgid "Maximum count of recent projects" -msgstr "Numero massimo di progetti recenti" - msgid "Clear my choice on the unsaved projects." msgstr "Cancella la mia scelta sui progetti non salvati." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Nessun avviso durante il caricamento di 3MF con codici G modificati" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "Backup automatico" +msgid "Clear my choice on the unsaved presets." +msgstr "Cancella la mia scelta sui profili non salvati." + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Esegui periodicamente il backup del tuo progetto per facilitare il " -"ripristino dopo un crash occasionale." -msgid "every" -msgstr "Ogni" +msgid "Login region" +msgstr "Regione di accesso" -msgid "The peroid of backup in seconds." -msgstr "Periodo di backup in secondi." +msgid "Stealth mode" +msgstr "Modalità invisibile" -msgid "Downloads" -msgstr "Scaricati" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Questo interrompe la trasmissione dei dati ai servizi cloud di Bambu. Gli " +"utenti che non utilizzano macchine BBL o che utilizzano la modalità Solo LAN " +"possono attivare questa funzione in tutta sicurezza." -msgid "Dark Mode" -msgstr "Modalità Scura" +msgid "Network test" +msgstr "Test di rete" -msgid "Enable Dark mode" -msgstr "Attiva modalità Scura" +msgid "Test" +msgstr "Prova" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Verifica solo la disponibilità di aggiornamenti stabili" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Sincronizzazione automatica profili utente (stampante/filamento/processo)" + +msgid "Update built-in Presets automatically." +msgstr "Aggiorna automaticamente i profili." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Abilita modulo di rete" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + +msgid "Associate files to Snapmaker Orca" +msgstr "Associa i file ad Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Associa i file 3MF ad Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "" +"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire i " +"file 3MF." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Associa i file STL ad Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "" +"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire i " +"file STL." + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Associa i file STEP ad Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "" +"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire i " +"file STEP." + +msgid "Associate web links to Snapmaker Orca" +msgstr "Associa i collegamenti web ad Snapmaker Orca" + +msgid "Developer" +msgstr "" msgid "Develop mode" msgstr "Modalità sviluppatore" msgid "Skip AMS blacklist check" -msgstr "Salta check Blacklist AMS" +msgstr "Salta il controllo della lista nera dell'AMS" -msgid "Home page and daily tips" -msgstr "Home page e suggerimenti quotidiani" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Mostra pagina iniziale all'avvio" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Livello registro" + +msgid "fatal" +msgstr "fatale" + +msgid "error" +msgstr "errore" + +msgid "warning" +msgstr "avviso" + +msgid "debug" +msgstr "debug" + +msgid "trace" +msgstr "traccia" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Impostazioni sincronizzazione" msgid "User sync" -msgstr "User sync" +msgstr "Sincronizzazione utente" msgid "Preset sync" -msgstr "Sincronizzazione preset" +msgstr "Sincronizzazione profili" msgid "Preferences sync" msgstr "Sincronizzazione preferenze" @@ -6881,16 +8072,16 @@ msgid "Rotate of view" msgstr "Ruota vista" msgid "Move of view" -msgstr "Vista panoramica" +msgstr "Movimento vista" msgid "Zoom of view" -msgstr "Vista Zoom" +msgstr "Ingrandimento vista" msgid "Other" msgstr "Altro" msgid "Mouse wheel reverses when zooming" -msgstr "Reverse scroll direction while zooming" +msgstr "Lo zoom tramitie rotellina del mouse è invertito" msgid "Enable SSL(MQTT)" msgstr "Abilita SSL (MQTT)" @@ -6901,24 +8092,6 @@ msgstr "Abilita SSL (FTP)" msgid "Internal developer mode" msgstr "Modalità sviluppatore interno" -msgid "Log Level" -msgstr "Livello log" - -msgid "fatal" -msgstr "fatale" - -msgid "error" -msgstr "Errore" - -msgid "warning" -msgstr "attenzione" - -msgid "debug" -msgstr "debug" - -msgid "trace" -msgstr "Traccia" - msgid "Host Setting" msgstr "Impostazione host" @@ -6935,43 +8108,58 @@ msgid "Product host" msgstr "Host del prodotto" msgid "debug save button" -msgstr "Pulsante salvataggio debug" +msgstr "pulsante salvataggio debug" msgid "save debug settings" msgstr "salva impostazioni debug" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "Le impostazioni di debug sono state salvate correttamente!" -msgid "Switch cloud environment, Please login again!" -msgstr "Cambia ambiente cloud; Effettua nuovamente il login!" +msgid "Cloud environment switched, please login again!" +msgstr "Cambia ambiente cloud; Effettua nuovamente l'accesso!" msgid "System presets" -msgstr "Preset di sistema" +msgstr "Profili di sistema" msgid "User presets" -msgstr "Preset utente" +msgstr "Profili utente" msgid "Incompatible presets" -msgstr "Preset incompatibili" +msgstr "Profili incompatibili" + +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" msgid "AMS filaments" msgstr "Filamento AMS" -msgid "Click to pick filament color" +msgid "Right filaments" +msgstr "" + +msgid "Click to select filament color" msgstr "Fai click per selezionare il colore del filamento" -msgid "Please choose the filament colour" -msgstr "Si prega di scegliere il colore del filamento" - msgid "Add/Remove presets" -msgstr "Aggiungi/Rimuovi preset" +msgstr "Aggiungi/Rimuovi profilo" msgid "Edit preset" -msgstr "Modifica preset" +msgstr "Modifica profilo" msgid "Project-inside presets" -msgstr "Preset interno al progetto" +msgstr "Profilo interno al progetto" + +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" msgid "Add/Remove filaments" msgstr "Aggiungi/rimuovi filamento" @@ -6979,56 +8167,65 @@ msgstr "Aggiungi/rimuovi filamento" msgid "Add/Remove materials" msgstr "Aggiungi/rimuovi materiali" -msgid "Select/Remove printers(system presets)" -msgstr "Seleziona/Rimuovi stampanti (preimpostazioni di sistema)" +msgid "Select/Remove printers (system presets)" +msgstr "Seleziona/Rimuovi stampanti (profili di sistema)" msgid "Create printer" -msgstr "Creare una stampante" +msgstr "Crea una stampante" + +msgid "Empty" +msgstr "Vuoto" + +msgid "Incompatible" +msgstr "Non compatibile" msgid "The selected preset is null!" -msgstr "Il preset selezionato è nullo!" +msgstr "Il profilo selezionato è nullo!" msgid "End" -msgstr "End" +msgstr "Fine" msgid "Customize" msgstr "Personalizza" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "Sequenza filamenti di altri strati" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "Inserisci il valore dello strato (>= 2)." msgid "Plate name" msgstr "Nome Piatto" +msgid "Same as Global Plate Type" +msgstr "Equivalente a Tipo di Piatto Globale" + +msgid "Bed type" +msgstr "Tipo di piatto" + msgid "Same as Global Print Sequence" -msgstr "Uguale a Sequenza stampa globale" +msgstr "Equivalente a Sequenza Stampa Globale" msgid "Print sequence" msgstr "Sequenza di stampa" msgid "Same as Global" -msgstr "Same as Global" +msgstr "Equivalente a Globale" msgid "Disable" -msgstr "Disable" +msgstr "Disabilita" msgid "Spiral vase" msgstr "Vaso a spirale" msgid "First layer filament sequence" -msgstr "Sequenza di filamenti di primo Layer" - -msgid "Same as Global Plate Type" -msgstr "Uguale al tipo di piano globale" +msgstr "Sequenza filamenti primo strato" msgid "Same as Global Bed Type" -msgstr "Uguale al tipo di piano globale" +msgstr "Equivalente a Tipo di Piatto Globale" msgid "By Layer" -msgstr "Per layer" +msgstr "Per strato" msgid "By Object" msgstr "Per oggetto" @@ -7037,21 +8234,21 @@ msgid "Accept" msgstr "Accetta" msgid "Log Out" -msgstr "Log Out" +msgstr "Disconnetti" msgid "Slice all plate to obtain time and filament estimation" -msgstr "Slice di tutti i piatti per ottenere una stima del tempo e filamento" +msgstr "Elabora di tutti i piatti per ottenere una stima di tempo e filamento" -msgid "Packing project data into 3mf file" -msgstr "Packing dati progetto in 3mf file" +msgid "Packing project data into 3MF file" +msgstr "Archiviazione dei dati del progetto nel file 3mf" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Caricamento 3mf" msgid "Jump to model publish web page" msgstr "Vai alla pagina web di pubblicazione del modello" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Nota: la preparazione può richiedere alcuni minuti. Si prega di avere " "pazienza." @@ -7059,51 +8256,53 @@ msgstr "" msgid "Publish" msgstr "Pubblica" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "La pubblicazione è stata annullata" msgid "Slicing Plate 1" -msgstr "Slicing Piatto 1" +msgstr "Elaborazione Piatto 1" -msgid "Packing data to 3mf" -msgstr "Packing data to 3mf" +msgid "Packing data to 3MF" +msgstr "Archiviazione dati su 3mf" msgid "Jump to webpage" msgstr "Vai alla pagina web" #, c-format, boost-format msgid "Save %s as" -msgstr "Salva %s come" +msgstr "Salva %s con nome" msgid "User Preset" -msgstr "Preset utente" +msgstr "Profilo utente" msgid "Preset Inside Project" -msgstr "Preset interno al Progetto" +msgstr "Profilo interno al progetto" msgid "Name is unavailable." msgstr "Nome non disponibile." -msgid "Overwrite a system profile is not allowed" -msgstr "Non è consentito sovrascrivere un profilo di sistema" +msgid "Overwriting a system profile is not allowed." +msgstr "Non è consentito sovrascrivere un profilo di sistema." #, boost-format msgid "Preset \"%1%\" already exists." -msgstr "Preset \"%1%\" esiste già." +msgstr "Il profilo \"%1%\" esiste già." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" -"Preset \"%1%\" esiste già ma è incompatibile con la stampante corrente." +"Il profilo \"%1%\" esiste già ma è incompatibile con la stampante corrente." -msgid "Please note that saving action will replace this preset" -msgstr "Tieni presente che il salvataggio sovrascriverà il preset corrente" +msgid "Please note that saving will overwrite this preset." +msgstr "" +"Si prega di notare che il salvataggio sovrascriverà Il profilo corrente." msgid "The name cannot be the same as a preset alias name." -msgstr "Il nome non può essere uguale a quello di un preset." +msgstr "Il nome non può essere uguale a quello di un profilo." msgid "Save preset" -msgstr "Salva preset" +msgstr "Salva profilo" msgctxt "PresetName" msgid "Copy" @@ -7111,141 +8310,108 @@ msgstr "Copia" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "La stampante \"%1%\" è selezionata con il preset \"%2%\"" +msgstr "La stampante \"%1%\" è stata selezionata con il profilo \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Scegli un'azione con \"%1%\" preimpostata dopo il salvataggio." +msgstr "Dopo aver salvato, seleziona un'azione con il profilo \"%1%\"." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "Per \"%1%\", cambia \"%2%\" con \"%3%\". " +msgstr "Per \"%1%\", modifica \"%2%\" con \"%3%\". " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "Per \"%1%\", aggiungere \"%2%\" come nuovo preset" +msgstr "Per \"%1%\", aggiungere \"%2%\" come nuovo profilo" #, boost-format msgid "Simply switch to \"%1%\"" -msgstr "Basta passare a \"%1%\"" +msgstr "Passa semplicemente a \"%1%\"" msgid "Task canceled" msgstr "Attività annullata" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Cerca" - -msgid "My Device" -msgstr "Mio dispositivo" - -msgid "Other Device" -msgstr "Altro dispositivo" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Inserisci codice di accesso" - -msgid "Can't find my devices?" -msgstr "Non riesci a trovare i dispositivi?" - -msgid "Log out successful." -msgstr "Log out riuscito." - -msgid "Busy" -msgstr "Occupato" - msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate" +msgstr "Piatto a bassa temperatura Bambu" msgid "PLA Plate" -msgstr "Piastra PLA" +msgstr "Piatto PLA" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "Piatto ingegneristico Bambu" msgid "Bambu Smooth PEI Plate" -msgstr "Piastra Bambu Smooth PEI" +msgstr "Piatto PEI liscio Bambu" msgid "High temperature Plate" -msgstr "High Temperature Plate" +msgstr "Piatto ad alta temperatura" msgid "Bambu Textured PEI Plate" -msgstr "Piastra PEI testurizzata Bambu" +msgstr "Piatto PEI ruvido Bambu" -msgid "Send print job to" -msgstr "Invia stampa a" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "Calibrazione della dinamica del flusso" +msgstr "Calibrazione dinamica flusso" -msgid "Click here if you can't connect to the printer" -msgstr "Clicca qui se non puoi connetterti alla stampante" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" -msgstr "Invio completo" +msgstr "invio completato" msgid "Error code" msgstr "Codice di errore" -msgid "No login account, only printers in LAN mode are displayed" +msgid "High Flow" msgstr "" -"Nessun account di login, vengono visualizzate solo le stampanti in modalità " -"LAN" - -msgid "Connecting to server" -msgstr "Connessione in corso al server" - -msgid "Synchronizing device information" -msgstr "Sincronizzazione informazioni dispositivo" - -msgid "Synchronizing device information time out" -msgstr "La sincronizzazione informazioni dispositivo è scaduta" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"Impossibile inviare un lavoro di stampa mentre la stampante sta aggiornando " -"il firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "La stampante sta eseguendo le istruzioni. Riavvia la stampa al termine" - -msgid "The printer is busy on other print job" -msgstr "La stampante è occupata con altro lavoro di stampa" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Il filamento %s supera il numero di slot AMS. Aggiorna il firmware della " -"stampante per supportare l'assegnazione degli slot AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Il filamento supera il numero di slot AMS. Aggiorna il firmware della " -"stampante per supportare l'assegnazione degli slot AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Fai clic su ciascun filamento in alto per specificare lo slot AMS di " -"mappatura prima di inviare il lavoro di stampa" #, c-format, boost-format msgid "" @@ -7262,39 +8428,12 @@ msgstr "" "Il filamento non corrisponde al filamento nello slot AMS. Aggiorna il " "firmware della stampante per supportare l'assegnazione degli slot AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Il firmware della stampante supporta solo la mappatura sequenziale del " -"filamento => slot AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "È necessario inserire una scheda microSD prima di stampare." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "È necessario inserire una scheda microSD per registrare un timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Impossibile inviare il lavoro di stampa a una stampante il cui firmware deve " -"essere aggiornato." - -msgid "Cannot send the print job for empty plate" -msgstr "Impossibile inviare il lavoro di stampa per un piatto vuoto" - -msgid "This printer does not support printing all plates" -msgstr "Questa stampante non supporta la stampa di piatti multipla" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7304,25 +8443,31 @@ msgstr "" "non genereranno video timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse non è supportato perché la sequenza di stampa è impostata su \"Per " -"oggetto\"." msgid "Errors" msgstr "Errori" -msgid "Please check the following:" -msgstr "Controllare quanto segue:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" "Il tipo di stampante selezionato durante la generazione del G-Code non è " "coerente con la stampante attualmente selezionata. Si consiglia di " -"utilizzare lo stesso tipo di stampante per lo slicing." +"utilizzare lo stesso tipo di stampante per l'elaborazione del piatto." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " @@ -7330,36 +8475,16 @@ msgid "" "start printing." msgstr "" "Ci sono alcuni filamenti sconosciuti nelle mappature AMS. Si prega di " -"verificare se sono i filamenti necessari. Se sono a posto, fai clic su " -"«Conferma» per iniziare a stampare." +"verificare se sono i filamenti richiesti. Se sono a posto, fai clic su " +"\"Conferma\" per iniziare a stampare." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "Ugello in preset: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "ugello memorizzato: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" +msgstr "Controllare quanto segue:" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" +"Si prega di correggere l'errore sopra, altrimenti la stampa non potrà " +"proseguire." msgid "" "Please click the confirm button if you still want to proceed with printing." @@ -7367,29 +8492,210 @@ msgstr "" "Fai clic sul pulsante di conferma se desideri continuare con la stampa." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Collegamento alla stampante. Impossibile annullare durante il processo di " -"connessione." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Precauzioni per l'uso! La calibrazione del flusso sulla piastra PEI " -"testurizzata può fallire a causa della superficie irregolare." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Calibrazione automatica del flusso tramite Micro Lidar" +msgid "Preparing print job" +msgstr "Preparazione della stampa" -msgid "Modifying the device name" -msgstr "Modifica nome del dispositivo" +msgid "The name length exceeds the limit." +msgstr "La lunghezza del nome supera il limite." -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Invia a microSD stampante" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Clicca qui se non puoi connetterti alla stampante" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Nessun profilo di accesso, vengono visualizzate solo le stampanti in " +"modalità LAN." + +msgid "Connecting to server..." +msgstr "Connessione in corso al server" + +msgid "Synchronizing device information..." +msgstr "Sincronizzazione informazioni dispositivo" + +msgid "Synchronizing device information timed out." +msgstr "La sincronizzazione delle informazioni del dispositivo è scaduta." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Impossibile inviare un'attività di stampa mentre la stampante sta " +"aggiornando il firmware." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"La stampante sta eseguendo le istruzioni. Riavvia la stampa al termine." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Impossibile inviare l'attività di stampa a una stampante il cui firmware " +"deve essere aggiornato." + +msgid "Cannot send a print job for an empty plate." +msgstr "Impossibile inviare l'attività di stampa se il piatto è vuoto" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Questa stampante non supporta la stampa di piatti multipli." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7397,21 +8703,20 @@ msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" -"La stampante selezionata è incompatibile con i preset della stampante scelti." +"La stampante selezionata non è compatibile con i profili della stampante " +"scelti." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"È necessario inserire una scheda MicroSD prima di inviare alla scheda SD " -"della stampante." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "La stampante deve essere sulla stessa LAN di Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "La stampante non supporta l'invio alla scheda microSD della stampante." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." -msgstr "Slice completo." +msgstr "Elaborazione completa." msgid "View all Daily tips" msgstr "Visualizza tutti i consigli giornalieri" @@ -7423,22 +8728,22 @@ msgid "Failed to connect socket" msgstr "Connessione del socket non riuscita" msgid "Failed to publish login request" -msgstr "Non è stato possibile pubblicare la richiesta di login" +msgstr "Non è stato possibile validare la richiesta di accesso" msgid "Get ticket from device timeout" -msgstr "Timeout durante il recupero del Ticket dal dispositivo" +msgstr "Tempo esaurito per il recupero del Ticket dal dispositivo" msgid "Get ticket from server timeout" -msgstr "Timeout durante il recupero del Ticket dal server" +msgstr "Tempo esaurito per il recupero del Ticket dal server" msgid "Failed to post ticket to server" -msgstr "Inserimento del ticket sul server non riuscito" +msgstr "Invio del ticket sul server non riuscito" msgid "Failed to parse login report reason" -msgstr "Non è stato possibile analizzare la causa del rapporto di login" +msgstr "Non è stato possibile analizzare la causa del rapporto di accesso" msgid "Receive login report timeout" -msgstr "Timeout ricezione del rapporto di login" +msgstr "Tempo esaurito per la ricezione del rapporto di accesso" msgid "Unknown Failure" msgstr "Fallimento sconosciuto" @@ -7447,29 +8752,29 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." +"Trova il codice PIN nella pagina Account sulla stampante,\n" +" e digita il codice PIN qui sotto." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "Non riesci a trovare il codice PIN?" msgid "Pin Code" -msgstr "Pin Code" +msgstr "Codice PIN" msgid "Binding..." -msgstr "Binding..." +msgstr "Associazione..." msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "Conferma sullo schermo della stampante" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "Accesso non riuscito. Controlla il codice PIN." msgid "Log in printer" -msgstr "Log in stampante" +msgstr "Accesso stampante" -msgid "Would you like to log in this printer with current account?" -msgstr "Vuoi accedere alla stampante con l'account corrente?" +msgid "Would you like to log in to this printer with the current account?" +msgstr "Vuoi accedere alla stampante con il profilo utente corrente?" msgid "Check the reason" msgstr "Verifica la causa" @@ -7481,25 +8786,25 @@ msgid "Terms and Conditions" msgstr "Termini e condizioni" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Grazie per aver acquistato un dispositivo Bambu Lab. Prima di utilizzare il " "dispositivo Bambu Lab, si prega di leggere i termini e le condizioni. " "Facendo clic per accettare di utilizzare il tuo dispositivo Bambu Lab, " -"accetti di rispettare l'Informativa sulla privacy e le Condizioni d'uso " +"accetti di rispettare l'Informativa sulla Riservatezza e le Condizioni d'Uso " "(collettivamente, i \"Termini\"). Se non rispetti o non accetti " -"l'Informativa sulla privacy di Bambu Lab, ti preghiamo di non utilizzare i " -"dispositivi e i servizi di Bambu Lab." +"l'Informativa sulla Riservatezza di Bambu Lab, ti preghiamo di non " +"utilizzare i dispositivi e i servizi di Bambu Lab." msgid "and" msgstr "e" msgid "Privacy Policy" -msgstr "Informativa Privacy" +msgstr "Informativa Riservatezza" msgid "We ask for your help to improve everyone's printer" msgstr "Chiediamo il tuo aiuto per migliorare tutte le stampanti" @@ -7515,43 +8820,45 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "Nella comunità della stampa 3D, impariamo dai successi e dagli insuccessi " -"degli altri per adattare i nostri parametri e impostazioni di slicing. %s " -"segue lo stesso principio e utilizza l'apprendimento automatico per " +"degli altri per adattare i nostri parametri e impostazioni di elaborazione. " +"%s segue lo stesso principio e utilizza l'apprendimento automatico per " "migliorare le sue prestazioni basandosi sui successi e sugli insuccessi di " "un vasto numero di stampe effettuate dai nostri utenti. Stiamo addestrando " "%s affinché diventi più intelligente alimentandolo con dati reali. Se sei " "d'accordo, questo servizio accederà alle informazioni dai tuoi registri " "degli errori e dai registri di utilizzo, che possono includere informazioni " -"descritte nell'Informativa sulla privacy. Non raccoglieremo alcun Dato " +"descritte nell'Informativa sulla Riservatezza. Non raccoglieremo alcun Dato " "Personale con il quale un individuo possa essere identificato direttamente o " "indirettamente, incluso, a titolo esemplificativo, nomi, indirizzi, " "informazioni di pagamento o numeri di telefono. Abilitando questo servizio, " -"accetti questi termini e la dichiarazione sull'Informativa sulla privacy." +"accetti questi termini e la dichiarazione sull'Informativa sulla " +"Riservatezza." msgid "Statement on User Experience Improvement Plan" msgstr "Dichiarazione del piano miglioramento dell'esperienza utente" msgid "Log in successful." -msgstr "Log in effettuato con successo." +msgstr "Accesso effettuato con successo." msgid "Log out printer" -msgstr "Log out dalla stampante" +msgstr "Disconnessione dalla stampante" msgid "Would you like to log out the printer?" msgstr "Vuoi disconnettere la stampante?" msgid "Please log in first." -msgstr "Prima effettua il login." +msgstr "Prima effettua l'accesso." msgid "There was a problem connecting to the printer. Please try again." -msgstr "Si è verificato un problema di connessione alla stampante. Riprovare." +msgstr "" +"Si è verificato un problema di connessione con la stampante. Riprovare." msgid "Failed to log out." msgstr "Disconnessione non riuscita." @@ -7562,72 +8869,82 @@ msgid "Save current %s" msgstr "Salva le %s attuali" msgid "Delete this preset" -msgstr "Elimina questo preset" +msgstr "Elimina questo profilo" msgid "Search in preset" -msgstr "Cerca nel preset" +msgstr "Cerca nel profilo" msgid "Click to reset all settings to the last saved preset." msgstr "" -"Clicca per ripristinare tutte le impostazioni dell'ultimo preset salvato." +"Clicca per ripristinare tutte le impostazioni dell'ultimo profilo salvato." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"È necessaria una Prime Tower per la modalità timeplase fluida. Potrebbero " -"esserci difetti sul modello senza una Prime Tower. Sei sicuro di voler " -"disabilitare la Prime Tower?" +"È necessaria una torre di spurgo per la modalità timeplase fluida. " +"Potrebbero esserci difetti sul modello senza una torre di spurgo. Sei sicuro " +"di voler disabilitare la torre di spurgo?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"È necessaria una Prime Tower per una modalità timelapse fluida. Potrebbero " -"esserci dei difetti sul modello senza Prime Tower. Vuoi abilitare la Prime " -"Tower?" +"È necessaria una torre di spurgo per una modalità timelapse fluida. " +"Potrebbero esserci dei difetti sul modello senza una torre di spurgo. Vuoi " +"abilitare la torre di spurgo?" msgid "Still print by object?" msgstr "Stampare ancora per oggetto?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Abbiamo aggiunto uno stile sperimentale \"Albero Slim\" che presenta un " -"volume di supporto più piccolo ma una resistenza più debole.\n" -"Si consiglia di utilizzarlo con: 0 layer interfaccia, 0 distanza dall'alto, " -"2 pareti." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Quando si utilizza il materiale di supporto per l'interfaccia di " +"supporto, si consigliano le seguenti impostazioni:\n" +"0 distanza Z superiore, 0 spaziatura interfaccia, motivo Rettilineo " +"Interlacciato e disabilita altezza strato di supporto indipendente." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Modificare queste impostazioni automaticamente? \n" +"Modificare queste impostazioni automaticamente?\n" "Si - Modifica queste impostazioni automaticamente.\n" -"No - Non modificare queste impostatzioni per me" +"No - Non modificare queste impostatzioni" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Per gli stili \"Albero Strong\" e \"Albero ibrido\", si consigliano le " -"seguenti impostazioni: almeno 2 layer interfaccia, distanza z superiore di " -"almeno 0,1 mm o utilizzo di materiali di supporto sull'interfaccia." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Quando si utilizza il materiale di supporto per l'interfaccia di supporto, " -"si consigliano le seguenti impostazioni:\n" -"0 distanza z superiore , 0 spaziatura interfaccia, trama concentrico e " -"disabilita altezza layer di supporto indipendente" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7642,6 +8959,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Sei sicuro di voler abilitare questa opzione?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7651,42 +8976,43 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "L'altezza dello strato supera il limite in Impostazioni stampante -> " -"Estrusore -> Limiti di altezza dello strato, ciò potrebbe causare problemi " -"di qualità di stampa." +"Estrusore -> Limiti Altezza Strato. Ciò potrebbe causare problemi di qualità " +"di stampa." -msgid "Adjust to the set range automatically? \n" -msgstr "Regolare automaticamente l'intervallo impostato? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Regolare automaticamente l'intervallo impostato?\n" msgid "Adjust" -msgstr "Rettifica" +msgstr "Regola" msgid "Ignore" msgstr "Ignora" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" +"Funzionalità sperimentale: ritrazione e taglio del filamento a una distanza " +"maggiore durante i cambi di filamento per ridurre al minimo lo spurgo. " +"Sebbene possa ridurre notevolmente lo spurgo, può anche aumentare il rischio " +"di intasamento degli ugelli o di altre complicazioni di stampa." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" +"Funzionalità sperimentale: ritrazione e taglio del filamento a una distanza " +"maggiore durante i cambi di filamento per ridurre al minimo lo spurgo. " +"Sebbene possa ridurre notevolmente lo spurgo, può anche aumentare il rischio " +"di intasamento degli ugelli o altre complicazioni di stampa. Utilizzare con " +"il firmware della stampante più recente." msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7694,10 +9020,87 @@ msgid "" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"Quando si registra un timelapse senza testa di stampa, si consiglia di " -"aggiungere un \"Timelapse Torre di pulizia\"\n" -"facendo clic con il pulsante destro del mouse sulla posizione vuota del " -"piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia\"»." +"Quando si registra un timelapse senza il gruppo testina, si consiglia di " +"aggiungere un \"Timelapse Torre di spurgo\"\n" +"facendo clic con il pulsante destro del mouse su una posizione vuota del " +"piatto e scegliendo \"Aggiungi primitiva\" ->\"Timelapse Torre di spurgo\"." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Verrà creata una copia del profilo di sistema attuale, che sarà separata dal " +"profilo di sistema." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Il profilo personalizzato attuale sarà separato dal profilo del sistema " +"padre." + +msgid "Modifications to the current profile will be saved." +msgstr "Le modifiche al profilo attuale verranno salvate." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Questa azione non è reversibile.\n" +"Vuoi procedere?" + +msgid "Detach preset" +msgstr "Separa profio" + +msgid "This is a default preset." +msgstr "Questo è un profilo predefinito." + +msgid "This is a system preset." +msgstr "Questo è un profilo di sistema." + +msgid "Current preset is inherited from the default preset." +msgstr "Il profiilo attuale è stato ereditato dal profilo predefinito." + +msgid "Current preset is inherited from" +msgstr "Il profilo corrente è ereditato da" + +msgid "It can't be deleted or modified." +msgstr "Non può essere eliminato o modificato." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Qualunque modifica deve essere salvata come un nuovo profilo ereditato da " +"questo." + +msgid "To do that please specify a new name for the preset." +msgstr "Specificaun nuovo nome per il profilo per effettuare l'operazione." + +msgid "Additional information:" +msgstr "Informazioni aggiuntive:" + +msgid "vendor" +msgstr "produttore" + +msgid "printer model" +msgstr "modello stampante" + +msgid "default print profile" +msgstr "profilo di stampa predefinito" + +msgid "default filament profile" +msgstr "profilo filamento predefinito" + +msgid "default SLA material profile" +msgstr "profilo materiale SLA predefinito" + +msgid "default SLA print profile" +msgstr "profilo di stampa SLA predefinito" + +msgid "full profile name" +msgstr "nome completo profilo" + +msgid "symbolic profile name" +msgstr "nome simbolico profilo" msgid "Line width" msgstr "Larghezza linea" @@ -7715,7 +9118,7 @@ msgid "Walls and surfaces" msgstr "Pareti e superfici" msgid "Bridging" -msgstr "Bridging" +msgstr "Ponti" msgid "Overhangs" msgstr "Sporgenze" @@ -7727,13 +9130,13 @@ msgid "Top/bottom shells" msgstr "Gusci superiori/inferiori" msgid "Initial layer speed" -msgstr "Velocità primo layer" +msgstr "Velocità primo strato" msgid "Other layers speed" -msgstr "Velocità altri layer" +msgstr "Velocità altri strati" msgid "Overhang speed" -msgstr "Velocità di sbalzo" +msgstr "Velocità sulle sporgenze" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " @@ -7743,37 +9146,49 @@ msgstr "" "Indica la velocità per vari gradi di sporgenza. I gradi di sporgenza sono " "espressi come percentuale della larghezza della linea. Velocità 0 significa " "che non c'è rallentamento per l'intervallo di gradi di sporgenza e viene " -"utilizzata la velocità della parete." +"utilizzata la velocità della parete" msgid "Bridge" msgstr "Ponte" msgid "Set speed for external and internal bridges" -msgstr "Impostare la velocità per ponti esterni e interni" +msgstr "Imposta la velocità per ponti esterni e interni" msgid "Travel speed" -msgstr "Velocità spostamento" +msgstr "Velocità di spostamento" msgid "Acceleration" msgstr "Accelerazione" msgid "Jerk(XY)" -msgstr "Jerk(XY)" +msgstr "Scatto(XY)" msgid "Raft" -msgstr "Raft" +msgstr "Zattera" msgid "Support filament" msgstr "Filamento per supporti" +msgid "Support ironing" +msgstr "Stiratura supporti" + msgid "Tree supports" msgstr "Supporti ad albero" -msgid "Skirt" -msgstr "Skirt" +msgid "Multimaterial" +msgstr "Multimateriale" msgid "Prime tower" -msgstr "Prime tower" +msgstr "Torre di spurgo" + +msgid "Filament for Features" +msgstr "Filamento per elementi" + +msgid "Ooze prevention" +msgstr "Prevenzione trasudo materiale" + +msgid "Skirt" +msgstr "Gonna" msgid "Special mode" msgstr "Modalità speciale" @@ -7782,7 +9197,7 @@ msgid "G-code output" msgstr "Uscita G-code" msgid "Post-processing Scripts" -msgstr "Script post-elaborazione" +msgstr "Script di post-elaborazione" msgid "Notes" msgstr "Note" @@ -7800,13 +9215,13 @@ msgid_plural "" "Please remove them, or will beat G-code visualization and printing time " "estimation." msgstr[0] "" -"La riga seguente %s contiene parole chiave riservata.\n" -"Rimuovilo, altrimenti la visualizzazione G-code e la stima del tempo di " -"stampa verranno interrotte." +"La riga seguente %s contiene parole chiave riservate.\n" +"Si prega di rimuoverla, altrimenti inciderà sulla visualizzazione del G-Code " +"e sulla stima del tempo di stampa." msgstr[1] "" -"Following lines %s contain reserved keywords.\n" -"Please remove them, or G-code visualization and print time estimation will " -"be broken." +"Le righe seguenti %s contengono parole chiave riservate.\n" +"Si prega di rimuoverle, altrimenti inciderà sulla visualizzazione del G-Code " +"e sulla stima del tempo di stampa." msgid "Reserved keywords found" msgstr "Parole chiave riservate trovate" @@ -7818,89 +9233,101 @@ msgid "Retraction" msgstr "Retrazione" msgid "Basic information" -msgstr "Informazioni di Base" +msgstr "Informazioni di base" msgid "Recommended nozzle temperature" -msgstr "Temperatura nozzle consigliata" +msgstr "Temperatura ugello consigliata" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" -"Intervallo di temperatura del nozzle consigliato per questo filamento. 0 " +"Intervallo di temperatura dell'ugello consigliato per questo filamento. 0 " "significa non impostato" +msgid "Flow ratio and Pressure Advance" +msgstr "Flusso di stampa e Anticipo di pressione" + msgid "Print chamber temperature" msgstr "Temperatura della camera di stampa" msgid "Print temperature" msgstr "Temperatura stampa" -msgid "Nozzle" -msgstr "Ugello" - msgid "Nozzle temperature when printing" -msgstr "Temperatura del nozzle durante la stampa" +msgstr "Temperatura dell'ugello durante la stampa" -msgid "Cool plate" -msgstr "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Piatto SuperTack a bassa temperatura" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Temperatura del piano quando è installato il piatto Cool Plate. Il valore 0 " -"significa che il filamento non supporta la stampa su piatto Cool Plate." -msgid "Textured Cool plate" -msgstr "" +msgid "Cool Plate" +msgstr "Piatto a bassa temperatura" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" +"Indica la temperatura del piano di stampa quando è installato il Piatto a " +"bassa temperatura. Un valore pari a 0 indica che il filamento non è " +"compatibile con la stampa sul Piatto a bassa temperatura." -msgid "Engineering plate" -msgstr "Engineering plate" +msgid "Textured Cool Plate" +msgstr "Piatto ruvido a bassa temperatura" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"Temperatura del piano quando è installato il piatto Engineering. Il valore 0 " -"significa che il filamento non supporta la stampa su piatto Engineering." +"Indica la temperatura del piano di stampa quando è installato il Piatto " +"ruvido a bassa temperatura. Un valore pari a 0 indica che il filamento non è " +"compatibile con la stampa sul Piatto ruvido a bassa temperatura." + +msgid "Engineering Plate" +msgstr "Piatto ingegneristico" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "" +"Indica la temperatura del piano di stampa quando è installato il Piatto " +"ingegneristico. Un valore pari a 0 indica che il filamento non è compatibile " +"con la stampa sul Piatto ingegneristico." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Piastra PEI liscia / piastra ad alta temperatura" +msgstr "Piatto PEI liscio / Piatto ad alta temperatura" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Temperatura del letto quando è installata la piastra PEI liscia/piastra ad " -"alta temperatura. Il valore 0 indica che il filamento non supporta la stampa " -"sulla piastra PEI liscia/piastra ad alta temperatura" +"Indica la temperatura del piano di stampa quando è installato il Piatto PEI " +"liscio/Piatto ad alta temperatura. Un valore pari a 0 indica che il " +"filamento non è compatibile con la stampa sul Piatto PEI liscio/Piatto ad " +"alta temperatura." msgid "Textured PEI Plate" -msgstr "Textured PEI Plate" +msgstr "Piatto PEI ruvido" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Temperatura del piano quando è installato il piatto Textured PEI. Il valore " -"0 significa che il filamento non è supportato sul piatto Textured PEI" +"Indica la temperatura del piano di stampa quando è installato il Piatto PEI " +"ruvido. Un valore pari a 0 indica che il filamento non è compatibile con la " +"stampa sul Piatto PEI ruvido." msgid "Volumetric speed limitation" msgstr "Limitazione velocità volumetrica" -msgid "Cooling" -msgstr "Raffreddamento" - msgid "Cooling for specific layer" -msgstr "Raffreddamento per specifico layer" +msgstr "Raffreddamento per strato specifico" msgid "Part cooling fan" -msgstr "Ventola di raffreddamento oggetto" +msgstr "Ventola di raffreddamento" msgid "Min fan speed threshold" msgstr "Soglia minima velocità della ventola" @@ -7911,11 +9338,11 @@ msgid "" "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"La ventola di raffreddamento della parte funzionerà alla velocità minima " -"della ventola quando la durata stimata del layer è superiore al valore di " -"soglia. Quando il tempo del layer è inferiore alla soglia, la velocità della " -"ventola verrà interpolata tra la velocità minima e massima della ventola in " -"base al tempo di stampa a layer." +"La ventola di raffreddamento partirà a velocità minima quando la durata " +"stimata dello strato non è superiore all'impostazione di durata dello " +"strato. Quando la durata di stampa dello strato è inferiore alla soglia, la " +"velocità della ventola varierà tra minimo e massimo in base alla durata di " +"stampa dello strato" msgid "Max fan speed threshold" msgstr "Soglia massima velocità della ventola" @@ -7924,14 +9351,15 @@ msgid "" "Part cooling fan speed will be max when the estimated layer time is shorter " "than the setting value" msgstr "" -"La ventola di raffreddamento funzionerà alla massima velocità quando il " -"tempo layer stimato è inferiore al valore di soglia." +"La ventola di raffreddamento funzionerà alla massima velocità quando la " +"durata stimata d stampa dello strato è inferiore all'impostazione di durata " +"dello strato" msgid "Auxiliary part cooling fan" -msgstr "Ventola di raffreddamento della parte ausiliaria" +msgstr "Ventola di raffreddamento ausiliaria" msgid "Exhaust fan" -msgstr "Aspiratore" +msgstr "Ventola di estrazione" msgid "During print" msgstr "Durante la stampa" @@ -7940,36 +9368,45 @@ msgid "Complete print" msgstr "Stampa completa" msgid "Filament start G-code" -msgstr "G-code Iniziale Filamento" +msgstr "G-code iniziale filamento" msgid "Filament end G-code" -msgstr "G-code Finale Filamento" - -msgid "Multimaterial" -msgstr "Multimateriale" +msgstr "G-code finale filamento" msgid "Wipe tower parameters" -msgstr "Parametri torre di pulitura" +msgstr "Parametri torre di spurgo" -msgid "Toolchange parameters with single extruder MM printers" -msgstr "Parametri di cambio strumento per stampanti MM con estrusore singolo" +msgid "Multi Filament" +msgstr "" -msgid "Ramming settings" -msgstr "Impostazioni del ramming" +msgid "Tool change parameters with single extruder MM printers" +msgstr "Parametri cambio filamenti per stampanti MM con estrusore singolo" -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "Parametri di cambio strumento con stampanti MM multiestrusore" +msgid "Set" +msgstr "Imposta" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "Parametri cambio filamenti per stampanti MM con più estrusori" + +msgid "Dependencies" +msgstr "Dipendenze" + +msgid "Compatible printers" +msgstr "Stampanti compatibili" + +msgid "Compatible process profiles" +msgstr "Profili di processo compatibili" msgid "Printable space" msgstr "Spazio di stampa" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Valore non valido fornito per il parametro %1%: %2%" msgid "G-code flavor is switched" -msgstr "La variante del G-Code è stata commutata" +msgstr "La variante del G-Code è stata modificata" msgid "Cooling Fan" msgstr "Velocità minima ventola di raffreddamento" @@ -7978,46 +9415,49 @@ msgid "Fan speed-up time" msgstr "Tempo di accelerazione della ventola" msgid "Extruder Clearance" -msgstr "Ingombro estrusore" +msgstr "Spazio libero estrusore" msgid "Adaptive bed mesh" -msgstr "Rete del letto adattiva" +msgstr "Matrice del piatto adattiva" msgid "Accessory" msgstr "Accessori" -msgid "Machine gcode" -msgstr "Macchina G-code" +msgid "Machine G-code" +msgstr "G-code macchina" msgid "Machine start G-code" -msgstr "G-code avvio della macchina" +msgstr "G-code iniziale macchina" msgid "Machine end G-code" -msgstr "Fine G-code" +msgstr "G-code finale macchina" msgid "Printing by object G-code" -msgstr "Stampa per oggetto G-code" +msgstr "G-code stampa per oggetto" msgid "Before layer change G-code" -msgstr "G-code prima del cambio layer" +msgstr "G-code prima del cambio strato" msgid "Layer change G-code" -msgstr "G-code cambio layer" +msgstr "G-code cambio strato" -msgid "Time lapse G-code" -msgstr "Time lapse G-code" +msgid "Timelapse G-code" +msgstr "G-code timelapse" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" msgstr "G-code cambio filamento" msgid "Change extrusion role G-code" -msgstr "Modificare il codice G del ruolo di estrusione" +msgstr "G-code cambio ruolo di estrusione" msgid "Pause G-code" -msgstr "G-code Pausa" +msgstr "G-code pausa" msgid "Template Custom G-code" -msgstr "Modello G-code personalizzato" +msgstr "G-code modello personalizzato" msgid "Motion ability" msgstr "Capacità di movimento" @@ -8025,29 +9465,59 @@ msgstr "Capacità di movimento" msgid "Normal" msgstr "Normale" +msgid "Resonance Avoidance" +msgstr "Evita risonanza" + +msgid "Resonance Avoidance Speed" +msgstr "Velocità evita risonanza" + msgid "Speed limitation" msgstr "Limitazione velocità" msgid "Acceleration limitation" -msgstr "Limita Accelerazione" +msgstr "Limitazione accelerazione" msgid "Jerk limitation" -msgstr "Limitazione jerk" +msgstr "Limitazione scatto" -msgid "Single extruder multimaterial setup" -msgstr "Configurazione multimateriale estrusore singolo" +msgid "Single extruder multi-material setup" +msgstr "Configurazione estrusore singolo multimateriale" + +msgid "Number of extruders of the printer." +msgstr "Numero di estrusori della stampante." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Estrusore singolo multimateriale selezionato,\n" +"tutti gli estrusori devono avere lo stesso diametro.\n" +"Vuoi modificare il diametro per tutti gli estrusori al valore del diametro " +"dell'ugello del primo estrusore?" + +msgid "Nozzle diameter" +msgstr "Diametro ugello" msgid "Wipe tower" -msgstr "Torre di pulitura" +msgstr "Torre di spurgo" -msgid "Single extruder multimaterial parameters" -msgstr "Parametri estrusore singolo materiale multiplo" +msgid "Single extruder multi-material parameters" +msgstr "Parametri estrusore singolo multimateriale" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Questa è una stampante multimateriale a singolo estrusore. I diametri di " +"tutti gli estrusori saranno impostati sul nuovo valore. Vuoi procedere?" msgid "Layer height limits" -msgstr "Limiti altezza layer" +msgstr "Limiti altezza strati" -msgid "Lift Z Enforcement" -msgstr "Applicazione dell'ascensore Z" +msgid "Z-Hop" +msgstr "Sollevamento Z" msgid "Retraction when switching material" msgstr "Retrazione quando si cambia materiale" @@ -8057,66 +9527,66 @@ msgid "" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"La funzione Pulitura non è disponibile quando si usa la modalità Retrazione " -"Firmware.\n" +"La funzione di Spurgo non è disponibile quando si usa la modalità Retrazione " +"del Firmware.\n" "\n" -"Devo disattivarla per poter abilitare la Retrazione Firmware?" +"Devo disattivarla per poter abilitare la modalità Retrazione del Firmware?" msgid "Firmware Retraction" -msgstr "Retrazione Firmware" +msgstr "Modalità Retrazione del Firmware" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" -msgstr "Distaccato" +msgstr "Separato" #, c-format, boost-format msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Preimpostazione filamento (Filament Preset) e %d Process Preset ( Process " -"Preset sono collegate a questa stampante. Tali impostazioni predefinite " -"verranno eliminate se la stampante viene eliminata." +"%d Profilo Filamento e %d Profilo Processo sono collegati a questa " +"stampante. Questi profili verranno eliminati se la stampante viene eliminata." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "I preset ereditati da altri preset non possono essere eliminati!" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "I profili ereditati da altri profili non possono essere eliminati!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "I seguenti predefiniti ereditano questo predefinito." -msgstr[1] "I seguenti predefiniti ereditano questo predefinito." +msgstr[0] "Il seguente profilo eredita questo profilo." +msgstr[1] "I seguentii profili ereditano questi profili." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Preset" +msgstr "%1% Profilo" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." -msgstr[0] "Verrà eliminato anche il seguente preset:" -msgstr[1] "The following presets will be deleted too:" - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Sei sicuro di voler eliminare il preset selezionato? \n" -"Se la preimpostazione corrisponde a un filamento attualmente in uso sulla " -"stampante, reimpostare le informazioni sul filamento per tale slot." +msgstr[0] "Verrà eliminato anche il seguente profilo." +msgstr[1] "Verranno eliminati anche i seguenti profili." #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Sei sicuro di voler %1% il preset selezionato?" -msgid "All" -msgstr "Tutto" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Imposta" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" -"Fare clic per ripristinare il valore corrente e associarlo al valore globale." +"Fai clic per ripristinare il valore corrente e associarlo al valore globale." msgid "Click to drop current modify and reset to saved value." msgstr "" @@ -8148,17 +9618,17 @@ msgid "Don't save" msgstr "Non salvare" msgid "Discard" -msgstr "Cancella" +msgstr "Scarta" msgid "Click the right mouse button to display the full text." msgstr "" "Clicca il pulsante destro del mouse per visualizzare il testo completo." msgid "All changes will not be saved" -msgstr "Nessuna modifica verrà salvata." +msgstr "Nessuna modifica verrà salvata" msgid "All changes will be discarded." -msgstr "Tutte le modifiche verranno eliminate." +msgstr "Tutte le modifiche verranno ignorate." msgid "Save the selected options." msgstr "Salvare le opzioni selezionate." @@ -8167,14 +9637,14 @@ msgid "Keep the selected options." msgstr "Mantieni le opzioni selezionate." msgid "Transfer the selected options to the newly selected preset." -msgstr "Trasferisci le opzioni selezionate nel preset appena selezionato." +msgstr "Trasferisci le opzioni selezionate nel profilo appena selezionato." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" -"Salva le opzioni selezionate in un preset \n" +"Salva le opzioni selezionate in un profilo \n" "\"%1%\"." #, boost-format @@ -8182,19 +9652,19 @@ msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"Trasferisci le opzioni selezionate nel preset appena selezionato \n" +"Trasferisci le opzioni selezionate nel profilo appena selezionato \n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "Preset \"%1%\" contiene modifiche non salvate:" +msgstr "Il profilo \"%1%\" contiene modifiche non salvate:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" non compatibile con il nuovo profilo della stampante e " +"Profilo \"%1%\" non compatibile con il nuovo profilo della stampante e " "contiene modifiche non salvate:" #, boost-format @@ -8202,54 +9672,57 @@ msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" non compatibile con il nuovo profilo di processo e contiene " +"Profilo \"%1%\" non compatibile con il nuovo profilo di processo e contiene " "modifiche non salvate:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Hai modificato alcune impostazioni del profilo \"%1%\"." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" -"You can save or discard the preset values you have modified." +"È possibile salvare o scartare i valori del profilo che hai modificato." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to " "transfer the values you have modified to the new preset." msgstr "" +"\n" +"È possibile salvare o scartare i valori del profilo che hai modificato, " +"oppure scegliere di trasferire i valori modificati ad un nuovo profilo." msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "Hai già modificato le impostazioni." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer " "the modified values to the new project" msgstr "" +"\n" +"È possibile scartare i valori del profilo che hai modificato, oppure " +"scegliere di trasferire i valori modificati ad un nuovo progetto" msgid "Extruders count" msgstr "Conteggio estrusori" -msgid "General" -msgstr "Generale" - msgid "Capabilities" msgstr "Caratteristiche" msgid "Show all presets (including incompatible)" -msgstr "Mostra tutti i preset (compresi non compatibili)" +msgstr "Mostra tutti i profili (compresi quelli non compatibili)" msgid "Select presets to compare" -msgstr "Seleziona i preset da confrontare" +msgstr "Seleziona i profili da confrontare" msgid "" "You can only transfer to current active profile because it has been modified." msgstr "" -"È possibile trasferire al profilo attivo corrente solo perché è stato " +"È possibile trasferire solo al profilo attivo attuale perché è stato " "modificato." msgid "" @@ -8257,10 +9730,10 @@ msgid "" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" -"Trasferisce le opzioni selezionate dal preset di sinistra a quello di " +"Trasferisce le opzioni selezionate dal profilo di sinistra a quello di " "destra.\n" -"Nota: i nuovi preset modificati saranno selezionati nelle schede delle " -"impostazioni dopo la chiusura di questa finestra." +"Nota: Dopo aver chiuso questa finestra di dialogo, i nuovi profili " +"modificati verranno selezionati nelle schede delle impostazioni." msgid "Transfer values from left to right" msgstr "Trasferimento dei valori da sinistra a destra" @@ -8270,23 +9743,23 @@ msgid "" "to right preset." msgstr "" "Se abilitata, questa finestra può essere utilizzata per trasferire i valori " -"selezionati dal preset di sinistra a quello di destra." +"selezionati dal profilo di sinistra a quello di destra." msgid "Add File" msgstr "Aggiungi file" msgid "Set as cover" -msgstr "Impostare come copertina" +msgstr "Imposta come copertina" msgid "Cover" -msgstr "Cover" +msgstr "Copertina" #, boost-format msgid "The name \"%1%\" already exists." -msgstr "Il nome \"%1%\" già esiste." +msgstr "Il nome \"%1%\" esiste già." msgid "Basic Info" -msgstr "Info di base" +msgstr "Informazioni di base" msgid "Pictures" msgstr "Immagini" @@ -8303,49 +9776,45 @@ msgstr "Autore" msgid "Model Name" msgstr "Nome modello" -#, c-format, boost-format -msgid "%s Update" -msgstr "%s Update" - -msgid "A new version is available" -msgstr "Una nuova versione è disponibile." - -msgid "Configuration update" -msgstr "Aggiornamento di configurazione" - -msgid "A new configuration package available, Do you want to install it?" -msgstr "È disponibile un nuovo pacchetto di configurazione. Vuoi installarlo?" - msgid "Description:" msgstr "Descrizione:" -msgid "Configuration incompatible" -msgstr "Configuration incompatible" +#, c-format, boost-format +msgid "%s Update" +msgstr "%s Aggiornamento" -msgid "the configuration package is incompatible with current application." +msgid "A new version is available" +msgstr "È disponibile una nuova versione" + +msgid "Configuration update" +msgstr "Aggiornamento configurazione" + +msgid "A new configuration package is available. Do you want to install it?" +msgstr "È disponibile un nuovo pacchetto di configurazione. Vuoi installarlo?" + +msgid "Configuration incompatible" +msgstr "Configurazione incompatibile" + +msgid "the configuration package is incompatible with the current application." msgstr "" "il pacchetto di configurazione non è compatibile con l'applicazione corrente." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" -"Pacchetto configurazione non compatibile con l'applicazione corrente.\n" -"%s aggiornerà il pacchetto configurazione per consentire l'avvio " +"Il pacchetto di configurazione non è compatibile con l'applicazione " +"corrente.\n" +"%s aggiornerà il pacchetto di configurazione per consentire l'avvio " "dell'applicazione." #, c-format, boost-format msgid "Exit %s" msgstr "Chiudi %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"Il pacchetto di configurazione non è compatibile con la versione corrente di " -"Snapmaker Orca." - msgid "Configuration updates" -msgstr "Aggiornamenti di configurazione" +msgstr "Aggiornamenti configurazione" msgid "No updates available." msgstr "Nessun aggiornamento disponibile." @@ -8353,62 +9822,223 @@ msgstr "Nessun aggiornamento disponibile." msgid "The configuration is up to date." msgstr "Configurazione aggiornata." -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Importazione colore file Obj" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "Specificare il numero di colori:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "Consigliato " -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "Corrispondenza colori" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "Corrispondenza approssimativa dei colori." msgid "Append" -msgstr "Append" +msgstr "Aggiungi" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "Reimposta estrusori assegnati." -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Utilizza AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"La stampante selezionata (%s) non è compatibile con il profilo della " +"stampante scelto nel programma (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse non è supportato perché la sequenza di stampa è impostata su \"Per " +"oggetto\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" -msgstr "Personalizzazione del ramming" +msgstr "Personalizzazione modellazione del filamento" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" @@ -8421,50 +10051,39 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"Per Ramming si intende l'estrusione rapida appena prima di un cambio " -"strumento in una stampante MM con estrusore singolo. Il suo scopo è quello " -"di dare una forma corretta all'estremità del filamento scaricato, in modo " -"che non impedisca l'inserimento del nuovo filamento e possa essere " -"reinserito successivamente. Questa fase è importante e i diversi materiali " -"possono richiedere velocità di estrusione diverse per ottenere una buona " -"forma. Per questo motivo, le velocità di estrusione nella fase di ramming " -"sono regolabili.\n" +"Per modellazione del filamento (o Ramming) si intende l'operazione di " +"estrusione effettuata appena prima di un cambio di filamento in una " +"stampante MM con estrusore singolo. Il suo scopo è quello di dare una forma " +"corretta all'estremità del filamento scaricato, in modo che non impedisca " +"l'inserimento del nuovo filamento e possa essere reinserito successivamente. " +"Questa fase è importante e i diversi materiali possono richiedere velocità " +"di estrusione diverse per ottenere una buona forma. Per questo motivo, le " +"velocità di estrusione nella fase di modellazione del filamento sono " +"regolabili.\n" "\n" "Si tratta di un'impostazione per esperti: una regolazione errata potrebbe " "causare inceppamenti, la macinazione del filamento da parte dell'ingranaggio " "dell'estrusore e così via." -msgid "Total ramming time" -msgstr "Durata totale di ramming" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" +"Per ottenere un avanzamento costante, tieni premuto %1% mentre trascini." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Volume totale di ramming" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Larghezza della linea di Ramming" - -msgid "Ramming line spacing" -msgstr "Spaziatura tra linee di ramming" - -msgid "Auto-Calc" -msgstr "Calcolo automatico" - -msgid "Re-calculate" -msgstr "Ricalcolo" - -msgid "Flushing volumes for filament change" -msgstr "Volumi di spurgo per il cambio filamento" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca ricalcolava i volumi di spurgo ogni volta che il colore dei filamenti " -"cambiava. È possibile disabilitare il calcolo automatico nelle preferenze > " -"di Snapmaker Orca" msgid "Flushing volume (mm³) for each filament pair." msgstr "Volume di spurgo (mm³) per ogni coppia di filamento." @@ -8477,162 +10096,142 @@ msgstr "Suggerimento: Volume di spurgo nell'intervallo [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Il moltiplicatore deve essere compreso nell'intervallo [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Ricalcola" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Moltiplicatore" -msgid "unloaded" -msgstr "scaricato" +msgid "Flushing volumes for filament change" +msgstr "Volumi di spurgo per cambio filamento" -msgid "loaded" -msgstr "caricato" - -msgid "Filament #" -msgstr "Filamento #" - -msgid "From" -msgstr "Da" - -msgid "To" -msgstr "A" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"Per questa operazione è necessario Windows Media Player! Desideri abilitare " +"'Windows Media Player' sul il tuo sistema operativo?" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" msgstr "" +"BambuSource non è stato registrato correttamente per la riproduzione " +"multimediale! Fare clic su Sì per effettuare nuovamente la registrazione. " +"Sarai promosso due volte" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" +"Componente BambuSource per la riproduzione multimediale mancante! " +"Reinstallare BambuStudio o cercare assistenza post-vendita." msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" +"È in uso una versione di BambuSource da un'installazione diversa. La " +"riproduzione video potrebbe non funzionare correttamente! Fare clic su Sì " +"per risolvere il problema." msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"Nel tuo sistema mancano i codec H.264 per GStreamer, necessari per " +"riprodurre i video. (Provare a installare i pacchetti gstreamer1.0-plugins-" +"bad o gstreamer1.0-libav e riavviare Snapmaker Orca?)" msgid "Bambu Network plug-in not detected." -msgstr "Plug-in di rete Bambu non rilevato." +msgstr "Modulo di rete Bambu non rilevato." msgid "Click here to download it." msgstr "Clicca qui per scaricarlo." msgid "Login" -msgstr "Login" +msgstr "Accedi" msgid "The configuration package is changed in previous Config Guide" msgstr "" -"Il pacchetto di configurazione è stato modificato nella precedente Guida " -"alla configurazione" +"Il pacchetto di configurazione è stato modificato nella precedente Guida di " +"configurazione" msgid "Configuration package changed" msgstr "Pacchetto di configurazione modificato" msgid "Toolbar" -msgstr "Toolbar" +msgstr "Barra degli strumenti" msgid "Objects list" msgstr "Elenco oggetti" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Importa geometrie da file STL/STEP/3MF/OBJ/AMF." - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "Importa geometrie da file STL/STEP/3MF/OBJ/AMF" msgid "Paste from clipboard" msgstr "Incolla dagli appunti" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" -"Mostra/nascondi la finestra di dialogo impostazioni dei dispositivi " +"Mostra/nascondi la finestra di dialogo delle impostazioni dei dispositivi " "3Dconnexion" msgid "Switch table page" msgstr "Cambia pagina tabella" msgid "Show keyboard shortcuts list" -msgstr "Mostra elenco scorciatoie di tastiera" +msgstr "Mostra elenco scorciatoie da tastiera" msgid "Global shortcuts" msgstr "Scorciatoie globali" -msgid "Rotate View" -msgstr "Ruota vista" - msgid "Pan View" msgstr "Vista panoramica" -msgid "Mouse wheel" -msgstr "Rotella del mouse" +msgid "Rotate View" +msgstr "Ruota vista" msgid "Zoom View" -msgstr "Vista Zoom" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "Ingrandimento vista" msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Questo orienta automaticamente gli oggetti selezionati o tutti gli oggetti. " "Se ci sono oggetti selezionati, orienta solo quelli selezionati. Altrimenti, " -"orienterà tutti gli oggetti nel piatto corrente." +"orienterà tutti gli elementi nel progetto corrente." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Questo orienta tutti gli oggetti nel piatto corrente." msgid "Collapse/Expand the sidebar" msgstr "Riduci/Espandi barra laterale" -msgid "⌘+Any arrow" -msgstr "⌘+Freccia qualsiasi" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" -msgstr "Movimento nello spazio della camera" - -msgid "⌥+Left mouse button" -msgstr "⌥+Tasto sinistro mouse" +msgstr "Movimento nello spazio della telecamera" msgid "Select a part" msgstr "Seleziona parte" -msgid "⌘+Left mouse button" -msgstr "⌘+Tasto sinistro del mouse" - msgid "Select multiple objects" msgstr "Seleziona più oggetti" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+qualsiasi freccia" - -msgid "Alt+Left mouse button" -msgstr "Alt+tasto sinistro del mouse" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Tasto sinistro del mouse" - -msgid "Shift+Left mouse button" -msgstr "Shift+tasto sinistro mouse" - msgid "Select objects by rectangle" msgstr "Seleziona oggetti per rettangolo" @@ -8640,49 +10239,46 @@ msgid "Arrow Up" msgstr "Freccia Su" msgid "Move selection 10 mm in positive Y direction" -msgstr "Sposta selezione 10 mm in direzione Y positiva" +msgstr "Sposta selezione di 10 mm in direzione Y positiva" msgid "Arrow Down" msgstr "Freccia Giù" msgid "Move selection 10 mm in negative Y direction" -msgstr "Sposta selezione 10 mm in direzione Y negativa" +msgstr "Sposta selezione di 10 mm in direzione Y negativa" msgid "Arrow Left" msgstr "Freccia Sinistra" msgid "Move selection 10 mm in negative X direction" -msgstr "Sposta selezione 10 mm in direzione X negativa" +msgstr "Sposta selezione di 10 mm in direzione X negativa" msgid "Arrow Right" msgstr "Freccia Destra" msgid "Move selection 10 mm in positive X direction" -msgstr "Sposta selezione 10 mm in direzione X positiva" - -msgid "Shift+Any arrow" -msgstr "Shift+freccia qualsiasi" +msgstr "Sposta selezione di 10 mm in direzione X positiva" msgid "Movement step set to 1 mm" msgstr "Passo movimento impostato a 1 mm" msgid "keyboard 1-9: set filament for object/part" -msgstr "Tastiera 1-9: imposta il filamento per l'oggetto/la parte" +msgstr "tastiera 1-9: imposta il filamento per l'oggetto/parte" msgid "Camera view - Default" -msgstr "Vista telecamera - Default" +msgstr "Vista telecamera - Predefinito" msgid "Camera view - Top" msgstr "Vista telecamera - In Alto" msgid "Camera view - Bottom" -msgstr "Vista telecamera - Basso" +msgstr "Vista telecamera - In Basso" msgid "Camera view - Front" -msgstr "Vista telecamera - Fronte" +msgstr "Vista telecamera - Anteriore" msgid "Camera view - Behind" -msgstr "Vista telecamera - Dietro" +msgstr "Vista telecamera - Posteriore" msgid "Camera Angle - Left side" msgstr "Angolo della camera - Lato sinistro" @@ -8694,74 +10290,77 @@ msgid "Select all objects" msgstr "Seleziona tutti gli oggetti" msgid "Gizmo move" -msgstr "Muovi Gizmo" - -msgid "Gizmo scale" -msgstr "Scala Gizmo" +msgstr "Strumento Muovi" msgid "Gizmo rotate" -msgstr "Ruota Gizmo" +msgstr "Strumento Ruota" + +msgid "Gizmo scale" +msgstr "Strumento Scala" + +msgid "Gizmo place face on bed" +msgstr "Strumento posiziona faccia sul piatto" msgid "Gizmo cut" -msgstr "Taglia Gizmo" +msgstr "Strumento Taglia" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Posiziona faccia sul piano" +msgid "Gizmo mesh boolean" +msgstr "Gizmo maglia booleana" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "Punti di supporto SLA Gizmo" +msgstr "Strumento Punti di supporto SLA" msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM pittura giunzione" +msgstr "Strumento Dipingi cucitura FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Testo in rilievo / incisione" +msgid "Gizmo text emboss/engrave" +msgstr "Strumento testo in rilievo/incisione" + +msgid "Gizmo measure" +msgstr "Gizmo misura" + +msgid "Gizmo assemble" +msgstr "Gizmo assemblaggio" + +msgid "Gizmo brim ears" +msgstr "Gizmo tese ad orecchio" msgid "Zoom in" -msgstr "Zoom in" +msgstr "Ingrandisci" msgid "Zoom out" -msgstr "Zoom out" +msgstr "Rimpicciolisci" msgid "Switch between Prepare/Preview" -msgstr "Swtich tra Prepare/Prewview" +msgstr "Passa tra Prepara e Anteprima" msgid "Plater" -msgstr "Piano" +msgstr "Piatto" msgid "Move: press to snap by 1mm" msgstr "Sposta: premi per muovere di 1 mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Rotella mouse" - msgid "Support/Color Painting: adjust pen radius" -msgstr "Supporto/Pittura a colori: regolare il raggio della penna" - -msgid "⌥+Mouse wheel" -msgstr "⌥+Rotella mouse" +msgstr "Supporto/Pittura a colori: regola il raggio della penna" msgid "Support/Color Painting: adjust section position" -msgstr "Supporto/Pittura a colori: regolare la posizione della sezione" - -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Rotellina del mouse" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Rotella del mouse" +msgstr "Supporto/Pittura a colori: regola la posizione della sezione" msgid "Gizmo" -msgstr "Gizmo" +msgstr "Strumento" msgid "Set extruder number for the objects and parts" -msgstr "Imposta il numero estrusore per gli oggetti e le parti" +msgstr "Imposta il numero dell'estrusore per gli oggetti e le parti" -msgid "Delete objects, parts, modifiers " -msgstr "Eliminare oggetti, parti, modificatori " +msgid "Delete objects, parts, modifiers" +msgstr "Elimina oggetti, parti, modificatori" msgid "Select the object/part and press space to change the name" msgstr "" -"Seleziona l'oggetto/la parte e premi la barra spaziatrice per cambiare il " +"Seleziona l'oggetto/la parte e premi la barra spaziatrice per modificare il " "nome" msgid "Mouse click" @@ -8788,42 +10387,40 @@ msgid "Horizontal slider - Move active thumb Right" msgstr "Cursore di scorrimento orizzontale - Sposta a destra il cursore attivo" msgid "On/Off one layer mode of the vertical slider" -msgstr "On/Off modalità un layer del cursore di scorrimento verticale" +msgstr "" +"Attiva/Disattiva modalità singolo strato del cursore di scorrimento verticale" -msgid "On/Off g-code window" -msgstr "Attivazione/disattivazione della finestra g-code" +msgid "On/Off G-code window" +msgstr "Attiva/Disattiva finestra G-code" msgid "Move slider 5x faster" msgstr "Sposta il cursore 5 volte più velocemente" -msgid "Shift+Mouse wheel" -msgstr "Shift+Rotella mouse" - msgid "Horizontal slider - Move to start position" -msgstr "" +msgstr "Cursore di scorrimento orizzontale - Sposta alla posizione iniziale" msgid "Horizontal slider - Move to last position" -msgstr "" +msgstr "Cursore di scorrimento orizzontale - Sposta alla posizione finale" msgid "Release Note" -msgstr "Note di aggiornamento" +msgstr "Note di rilascio" #, c-format, boost-format -msgid "version %s update information :" -msgstr "Versione %s informazioni aggiornate:" +msgid "version %s update information:" +msgstr "versione %s informazioni aggiornate:" msgid "Network plug-in update" -msgstr "Aggiornamento del plug-in di rete" +msgstr "Aggiornamento del modulo di rete" msgid "" "Click OK to update the Network plug-in when Snapmaker Orca launches next time." msgstr "" -"Clicca su OK per aggiornare il plug-in di rete al prossimo avvio di Bambu " -"Studio." +"Clicca su OK per aggiornare il modulo di rete al prossimo avvio di " +"Snapmaker Orca." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "Disponibile nuovo plug-in di rete (%s). Vuoi installarlo?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Disponibile nuovo modulo di rete (%s). Vuoi installarlo?" msgid "New version of Snapmaker Orca" msgstr "Nuova versione di Snapmaker Orca" @@ -8831,62 +10428,29 @@ msgstr "Nuova versione di Snapmaker Orca" msgid "Skip this Version" msgstr "Salta questa versione" -msgid "Done" -msgstr "Fine" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Carica" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" - msgid "Confirm and Update Nozzle" msgstr "Conferma e aggiorna l'ugello" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Connessione LAN fallita (invio del file di stampa)" +msgid "Connect the printer using IP and access code" +msgstr "Collega la stampante tramite IP e codice di accesso" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Step 1, conferma che Snapmaker Orca e la tua stampante siano sulla stessa LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Step 2, se l'IP e il codice di accesso riportati di seguito sono diversi dai " -"valori effettivi sulla stampante, correggili." msgid "IP" msgstr "IP" @@ -8894,20 +10458,45 @@ msgstr "IP" msgid "Access Code" msgstr "Codice di accesso" +msgid "Printer model" +msgstr "Modello stampante" + +msgid "Printer name" +msgstr "Nome stampante" + msgid "Where to find your printer's IP and Access Code?" msgstr "Dove trovo l'IP e il codice accesso della stampante?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Passaggio 3: eseguire il ping dell'indirizzo IP per verificare la perdita di " -"pacchetti e la latenza." +msgid "Connect" +msgstr "Connetti" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Configurazione Manuale" msgid "IP and Access Code Verified! You may close the window" msgstr "IP e codice di accesso verificati! È possibile chiudere la finestra" +msgid "connecting..." +msgstr "connessione..." + +msgid "Failed to connect to printer." +msgstr "Impossibile connettersi alla stampante." + +msgid "Failed to publish login request." +msgstr "Impossibile validare la richiesta di accesso." + +msgid "The printer has already been bound." +msgstr "La stampante è già stata collegata." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" +"La modalità della stampante non è corretta. Passare alla modalità Solo LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "" +"Connessione alla stampante... La finestra di dialogo si chiuderà " +"automaticamente" + msgid "Connection failed, please double check IP and Access Code" msgstr "Connessione non riuscita, ricontrolla l'IP e il codice di accesso" @@ -8918,31 +10507,51 @@ msgstr "" "Connessione non riuscita! Se l'IP e il codice di accesso sono corretti, \n" "Passare al passaggio 3 per la risoluzione dei problemi di rete" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Modello:" -msgid "Serial:" -msgstr "Seriale:" - -msgid "Version:" -msgstr "Versione:" - msgid "Update firmware" msgstr "Aggiorna firmware" msgid "Beta version" msgstr "Versione beta" -msgid "Latest version" -msgstr "Ultima versione" - msgid "Updating" msgstr "Aggiornamento in corso" -msgid "Updating failed" +msgid "Update failed" msgstr "Aggiornamento fallito" -msgid "Updating successful" +msgid "Update successful" msgstr "Aggiornamento riuscito" msgid "" @@ -8967,16 +10576,16 @@ msgid "" "printing. Do you want to update now? You can also update later on printer or " "update next time starting Orca." msgstr "" -"La versione firmware è anomala. Prima di stampare, è necessario eseguire la " -"riparazione e l'aggiornamento. Si desidera aggiornare ora? È possibile " -"eseguire l'aggiornamento anche in un secondo momento sulla stampante o al " +"La versione del firmware è anomala. Prima di stampare, è necessario eseguire " +"la riparazione e l'aggiornamento. Si desidera aggiornare ora? È possibile " +"eseguire l'aggiornamento della stampante anche in un secondo momento o al " "prossimo avvio di Snapmaker Orca." msgid "Extension Board" msgstr "Scheda di estensione" -msgid "Saving objects into the 3mf failed." -msgstr "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." +msgstr "Salvataggio degli oggetti nel file 3MF non riuscito." msgid "Only Windows 10 is supported." msgstr "È supportato solo Windows 10." @@ -8994,31 +10603,31 @@ msgid "Repairing object by Windows service" msgstr "Riparazione oggetto da parte del servizio Windows" msgid "Repair failed." -msgstr "Riparazione fallita." +msgstr "Riparazione non riuscita." msgid "Loading repaired objects" msgstr "Caricamento oggetti riparati" -msgid "Exporting 3mf file failed" -msgstr "Esportazione del file 3mf non riuscita" +msgid "Exporting 3MF file failed" +msgstr "Esportazione del file 3MF non riuscita" -msgid "Import 3mf file failed" -msgstr "Importazione del file 3mf non riuscita" +msgid "Import 3MF file failed" +msgstr "Importazione del file 3MF non riuscita" -msgid "Repaired 3mf file does not contain any object" -msgstr "Il file 3mf riparato non contiene alcun oggetto." +msgid "Repaired 3MF file does not contain any object" +msgstr "Il file 3MF riparato non contiene alcun oggetto" -msgid "Repaired 3mf file contains more than one object" -msgstr "Il file 3mf riparato contiene più di un oggetto." +msgid "Repaired 3MF file contains more than one object" +msgstr "Il file 3MF riparato contiene più di un oggetto" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Il file 3mf riparato non contiene alcun volume." +msgid "Repaired 3MF file does not contain any volume" +msgstr "Il file 3MF riparato non contiene alcun volume" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Il file 3mf riparato contiene più di un volume." +msgid "Repaired 3MF file contains more than one volume" +msgstr "Il file 3MF riparato contiene più di un volume" msgid "Repair finished" -msgstr "Riparazione finita" +msgstr "Riparazione completata" msgid "Repair canceled" msgstr "Riparazione annullata" @@ -9044,13 +10653,14 @@ msgid "" "One object has empty initial layer and can't be printed. Please Cut the " "bottom or enable supports." msgstr "" -"Un oggetto ha un livello iniziale vuoto e non può essere stampato. Taglia il " +"Un oggetto ha lo strato iniziale vuoto e non può essere stampato. Taglia il " "fondo o abilita i supporti." #, boost-format msgid "Object can't be printed for empty layer between %1% and %2%." msgstr "" -"L'oggetto ha layer vuoti compresi tra %1% e %2% e non può essere stampato." +"L'oggetto ha degli strati vuoti compresi tra %1% e %2% e non può essere " +"stampato." #, boost-format msgid "Object: %1%" @@ -9061,17 +10671,24 @@ msgid "" "faulty mesh" msgstr "" "Le parti dell'oggetto a queste altezze potrebbero essere troppo sottili o " -"l'oggetto potrebbe avere una mesh difettosa." +"l'oggetto potrebbe avere una maglia poligonale difettosa" msgid "No object can be printed. Maybe too small" -msgstr "" -"Non è possibile stampare alcun oggetto. Potrebbe essere troppo piccolo." +msgstr "Non è possibile stampare alcun oggetto. Potrebbe essere troppo piccolo" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"La stampa è molto vicina alle aree di preparazione. Assicurati che non vi " +"siano collisioni." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"Impossibile generare il G-code per G-code personalizzato non valido.\n" +"Impossibile generare il G-code a causa di un G-Code personalizzato non " +"valido.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." @@ -9081,7 +10698,16 @@ msgstr "" #, boost-format msgid "Generating G-code: layer %1%" -msgstr "Genera G-code: layer %1%" +msgstr "Generazione G-code: strato %1%" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" msgid "Inner wall" msgstr "Parete interna" @@ -9090,10 +10716,10 @@ msgid "Outer wall" msgstr "Parete esterna" msgid "Overhang wall" -msgstr "Parete a sbalzo" +msgstr "Parete sporgente" msgid "Sparse infill" -msgstr "Riempimento" +msgstr "Riempimento sparso" msgid "Internal solid infill" msgstr "Riempimento solido interno" @@ -9108,19 +10734,19 @@ msgid "Internal Bridge" msgstr "Ponte interno" msgid "Gap infill" -msgstr "Riempimento gap" +msgstr "Riempimento spazi vuoti" msgid "Support interface" -msgstr "Interfaccia supporto" +msgstr "Interfaccia di supporto" msgid "Support transition" -msgstr "Supporto alla transizione" +msgstr "Transizione di supporto" msgid "Multiple" msgstr "Multiplo" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Impossibile calcolare la larghezza della linea di %1%. Impossibile ottenere " "il valore \"%2%\" " @@ -9129,11 +10755,11 @@ msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " "and extrusion width" msgstr "" -"Spaziatura non valida fornita a Flow::with_spacing (), controlla l'altezza " -"del livello e la larghezza di estrusione" +"Spaziatura non valida fornita a Flow::with_spacing(), controlla l'altezza " +"dello strato e la larghezza di estrusione" msgid "undefined error" -msgstr "errore non definito" +msgstr "errore indefinito" msgid "too many files" msgstr "troppi file" @@ -9145,28 +10771,28 @@ msgid "unsupported method" msgstr "metodo non supportato" msgid "unsupported encryption" -msgstr "criptaggio non supportato" +msgstr "crittografia non supportata" msgid "unsupported feature" -msgstr "caratteristica non supportata" +msgstr "funzionalità non supportata" msgid "failed finding central directory" msgstr "directory centrale non trovata" msgid "not a ZIP archive" -msgstr "non un archivio ZIP" +msgstr "non è un archivio ZIP" msgid "invalid header or corrupted" msgstr "intestazione non valida o danneggiata" msgid "unsupported multidisk" -msgstr "Il salvataggio su RAID non supportato." +msgstr "salvataggio su RAID non supportato" msgid "decompression failed" -msgstr "decompressione fallita" +msgstr "decompressione non riuscita" msgid "compression failed" -msgstr "Compressione non riuscita" +msgstr "compressione non riuscita" msgid "unexpected decompressed size" msgstr "dimensione decompressa imprevista" @@ -9178,28 +10804,28 @@ msgid "unsupported central directory size" msgstr "dimensione della directory centrale non supportata" msgid "allocation failed" -msgstr "allocazione fallita" +msgstr "allocazione non riuscita" msgid "file open failed" -msgstr "apertura file non riuscita" +msgstr "apertura del file non riuscita" msgid "file create failed" msgstr "generazione del file non riuscita" msgid "file write failed" -msgstr "scrittura file fallita" +msgstr "scrittura del file non riuscita" msgid "file read failed" msgstr "lettura del file non riuscita" msgid "file close failed" -msgstr "chiusura del file fallita" +msgstr "chiusura del file non riuscita" msgid "file seek failed" -msgstr "ricerca file fallita" +msgstr "ricerca del file non riuscita" msgid "file stat failed" -msgstr "statistica file non riuscita" +msgstr "statistica del file non riuscita" msgid "invalid parameter" msgstr "parametro non valido" @@ -9217,19 +10843,19 @@ msgid "file not found" msgstr "file non trovato" msgid "archive too large" -msgstr "Archivio troppo grande" +msgstr "archivio troppo grande" msgid "validation failed" msgstr "convalida non riuscita" msgid "write callback failed" -msgstr "scrittura callback fallita" +msgstr "ripristino della scrittura non riuscita" #, boost-format msgid "" "%1% is too close to exclusion area, there may be collisions when printing." msgstr "" -"%1% è troppo vicino all'area di esclusione, potrebbero verificarsi " +"%1% è troppo vicino all'area di esclusione e potrebbero verificarsi " "collisioni durante la stampa." #, boost-format @@ -9240,34 +10866,55 @@ msgstr "%1% è troppo vicino ad altri oggetti e potrebbe causare collisioni." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% è troppo alto e si verificheranno collisioni." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" è troppo vicino agli altri; potrebbero verificarsi delle collisioni durante " -"la stampa." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" -" è troppo vicino all'area di esclusione, potrebbero verificarsi collisioni " +" è troppo vicino all'area di esclusione e potrebbero verificarsi collisioni " "durante la stampa." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" -msgstr "Prime Tower" +msgstr "Torre di spurgo" msgid " is too close to others, and collisions may be caused.\n" msgstr " è troppo vicino agli altri e possono verificarsi collisioni.\n" msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "" -" è troppo vicino a un'area di esclusione e si verificheranno collisioni.\n" +" è troppo vicino all'area di esclusione e si verificheranno collisioni.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Non è possibile stampare insieme più filamenti con grandi differenze di " -"temperatura. In caso contrario, l'estrusore e il nozzle potrebbero bloccarsi " -"o danneggiarsi durante la stampa." msgid "No extrusions under current settings." msgstr "Nessuna estrusione con le impostazioni attuali." @@ -9277,7 +10924,16 @@ msgid "" "enabled." msgstr "" "La modalità fluida del timelapse non è supportata quando è abilitata la " -"sequenza \"per oggetto\"." +"sequenza \"Per oggetto\"." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " @@ -9290,9 +10946,18 @@ msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." msgstr "" -"La modalità Spirale (vaso) non funziona quando un oggetto contiene più di un " +"La modalità Vaso a spirale non funziona quando un oggetto contiene più di un " "materiale." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Sebbene l'oggetto %1% rientri nel volume di stampa, esso supera l'altezza " +"massima del volume di stampa a causa della compensazione del restringimento " +"del materiale." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "L'oggetto %1% supera l'altezza massima del volume di stampa." @@ -9302,8 +10967,8 @@ msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." msgstr "" -"Sebbene l'oggetto %1% rientri nel volume di stampa, il suo ultimo layer " -"supera l'altezza massima." +"Sebbene l'oggetto %1% rientri nel volume di stampa, il suo ultimo strato " +"supera l'altezza massima del volume di stampa." msgid "" "You might want to reduce the size of your model or change current print " @@ -9313,75 +10978,93 @@ msgstr "" "di stampa correnti e riprovare." msgid "Variable layer height is not supported with Organic supports." -msgstr "Layer ad altezza variabile non è compatibile con i Supporti Organici." +msgstr "Altezza strato adattiva non è compatibile con i Supporti organici." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Diametri degli ugelli diversi e diametri di filamento diversi non sono " -"consentiti quando la torre Prime è abilitata." +"Ugelli e filamenti di diverso diametro potrebbero non funzionare " +"correttamente quando è abilitata la torre di spurgo. Questa funzione è " +"sperimentale, quindi procedere con cautela." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"Attualmente la Torre di pulitura è supportata solo con l'indirizzamento " -"relativo dell'estrusore (use_relative_e_distances = 1)." +"Attualmente la torre di spurgo è supportata solo con l'indirizzamento " +"relativo dell'estrusore (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"La prevenzione delle perdite (ooze prevention) attualmente non è supportata " -"quando è abilitata la torre di priming." +"La prevenzione trasudo del materiale è compatibile con la torre di spurgo " +"solo quando 'single_extruder_multi_material' è disattivato." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"La torre di spurgo è attualmente supportata solo per le versioni Marlin, " -"RepRap/Sprinter, RepRapFirmware e Repetier G-code." +"La torre di spurgo è attualmente supportata solo per le varianti G-code " +"Marlin, RepRap/Sprinter, RepRapFirmware e Repetier." msgid "The prime tower is not supported in \"By object\" print." -msgstr "La Prime Tower non è supportata nella stampa \"Per oggetto\"." +msgstr "La torre di spurgo non è supportata nella stampa \"Per oggetto\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"La Prime Tower non è supportata quando è attivo Layer adattativi. Richiede " -"che tutti gli oggetti abbiano la stessa altezza layer." +"La torre di spurgo non è supportata quando Altezza strato adattiva è " +"abilitato. Richiede che tutti gli oggetti abbiano gli strati della stessa " +"altezza." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"La Prime Tower richiede che il \"gap supporto\" sia un multiplo dell'altezza " -"del layer." +"La torre di spurgo richiede che lo \"spazio supporto\" sia un multiplo " +"dell'altezza dello strato." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" -"La Prime Tower richiede che tutti gli oggetti abbiano la stessa altezza " -"layer." +"La torre di spurgo richiede che tutti gli oggetti abbiano gli strati della " +"stessa altezza." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" -"La Prime Tower richiede che tutti gli oggetti siano stampati sullo stesso " -"numero di layers del raft." +"La torre di spurgo richiede che tutti gli oggetti siano stampati su un " +"zattera (o base di stampa) con lo stesso numero di strati." + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"La torre di spurgo è supportata per oggetti multipli solo se questi vengono " +"stampati con la stessa 'Distanza Z superiore' (support_top_z_distance)" msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"La Prime Tower richiede che tutti gli oggetti siano elaborati con la stessa " -"altezza layer." +"La torre di spurgo richiede che tutti gli oggetti siano elaborati con strati " +"della stessa altezza." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" -"La Prime Tower è supportata solo se tutti gli oggetti hanno la stessa " -"altezza layer adattativi." +"La torre di spurgo è supportata solo se tutti gli oggetti hanno la stessa " +"Altezza strato adattiva." + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"A uno o più oggetti è stato assegnato un estrusore di cui la stampante non è " +"dotata." msgid "Too small line width" msgstr "Larghezza linea troppo piccola" @@ -9389,41 +11072,52 @@ msgstr "Larghezza linea troppo piccola" msgid "Too large line width" msgstr "Larghezza linea troppo grande" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Stampa con più estrusori con diametri di ugello diversi. Se il supporto deve " +"essere stampato con il filamento corrente (support_filament == 0 o " +"support_interface_filament == 0), tutti gli ugelli devono avere lo stesso " +"diametro." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"La Prime Tower richiede che il supporto abbia la stessa altezza layer " -"dell'oggetto." +"La torre di spurgo richiede che i supporti abbiano gli strati della stessa " +"altezza dell'oggetto." msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." msgstr "" -"Il diametro della punta del supporto organico non deve essere inferiore alla " -"larghezza dell'estrusione del materiale di supporto." +"Il diametro della punta del supporto organico ad albero non deve essere " +"inferiore alla larghezza dell'estrusione del materiale di supporto." msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" -"Il diametro della ramificazione del supporto organico non deve essere minore " -"di 2 volte rispetto alla larghezza dell'estrusione del materiale di supporto." +"Il diametro della ramificazione del supporto organico non deve essere " +"inferiore a 2 volte la larghezza di estrusione del materiale di supporto." msgid "" "Organic support branch diameter must not be smaller than support tree tip " "diameter." msgstr "" -"Il diametro della ramificazione organica non deve essere inferiore al " -"diametro della punta del supporto ad albero." +"Il diametro della ramificazione del supporto organico non deve essere " +"inferiore al diametro della punta del supporto ad albero." msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -"Utilizzati supporti forzati ma i supporti non sono abilitati. Abilitare i " +"Supporti forzati in uso ma i supporti non sono abilitati. Abilitare i " "supporti." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "L'altezza del layer non può superare il diametro del nozzle." +msgid "Layer height cannot exceed nozzle diameter." +msgstr "L'altezza dello strato non può superare il diametro dell'ugello." msgid "" "Relative extruder addressing requires resetting the extruder position at " @@ -9455,8 +11149,8 @@ msgstr "Piatto %d: %s non supporta il filamento %s" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" -"L'impostazione della velocità di jerk troppo bassa potrebbe causare " -"artefatti sulle superfici curve" +"Impostare la velocità di scatto una velocità troppo bassa potrebbe causare " +"artefattisulle superfici curve" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" @@ -9466,12 +11160,21 @@ msgid "" "You can adjust the maximum jerk setting in your printer's configuration to " "get higher speeds." msgstr "" -"L'impostazione del jerk supera quella massima prevista dalla stampante. " -"(machine_max_jerk_x/machine_max_jerk_y).\n" -"Orca limiterà automaticamente la velocità del jerk per garantire che non " +"L'impostazione della velocità di scatto supera quella massima prevista dalla " +"stampante. (machine_max_jerk_x/machine_max_jerk_y).\n" +"Orca limiterà automaticamente la velocità di scatto per garantire che non " "superi le capacità della stampante.\n" -"È possibile regolare l'impostazione di jerk massimo nella configurazione " -"della stampante per ottenere velocità più elevate." +"Per ottenere velocità più elevate, è possibile regolare la velocità massima " +"di scatto nelle impostazioni della stampante." + +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" msgid "" "The acceleration setting exceeds the printer's maximum acceleration " @@ -9485,8 +11188,8 @@ msgstr "" "stampante. (machine_max_acceleration_extruding).\n" "Orca limiterà automaticamente la velocità di accelerazione per garantire che " "non superi le capacità della stampante.\n" -"È possibile regolare il valore machine_max_acceleration_extruding nella " -"configurazione della stampante per ottenere velocità più elevate." +"Per ottenere velocità più elevate, è possibile regolare il valore " +"machine_max_acceleration_extruding nelle impostazioni della stampante." msgid "" "The travel acceleration setting exceeds the printer's maximum travel " @@ -9496,15 +11199,28 @@ msgid "" "You can adjust the machine_max_acceleration_travel value in your printer's " "configuration to get higher speeds." msgstr "" -"The travel acceleration setting exceeds the printer's maximum travel " -"acceleration (machine_max_acceleration_travel).\n" -"Orca will automatically cap the travel acceleration speed to ensure it " -"doesn't surpass the printer's capabilities.\n" -"You can adjust the machine_max_acceleration_travel value in your printer's " -"configuration to get higher speeds." +"L'impostazione di accelerazione dello spostamento supera quella massima " +"prevista dalla stampante.(machine_max_acceleration_travel).\n" +"Orca limiterà automaticamente la velocità di accelerazione dello spostamento " +"per garantire che non superi le capacità della stampante.\n" +"Per ottenere velocità più elevate, è possibile regolare il valore " +"machine_max_acceleration_travel nelle impostazioni della stampante." + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"La compensazione del restringimento del materiale non verrà utilizzata " +"perché il fenomeno di restringimento nei filamenti utilizzati varia in modo " +"significativo." msgid "Generating skirt & brim" -msgstr "Generazione skirt & brim" +msgstr "Generazione gonna e tesa" msgid "Exporting G-code" msgstr "Esportazione G-code" @@ -9513,13 +11229,19 @@ msgid "Generating G-code" msgstr "Generazione G-code" msgid "Failed processing of the filename_format template." -msgstr "Processing of the filename_format template failed." +msgstr "Elaborazione del modello filename_format non riuscita." + +msgid "Printer technology" +msgstr "Tecnologia stampante" msgid "Printable area" msgstr "Area di stampa" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" -msgstr "Zona piano esclusa" +msgstr "Zona piatto esclusa" msgid "" "Unprintable area in XY plane. For example, X1 Series printers use the front " @@ -9528,11 +11250,11 @@ msgid "" msgstr "" "Area non stampabile nel piano XY. Ad esempio, le stampanti della serie X1 " "utilizzano l'angolo anteriore sinistro per tagliare il filamento durante il " -"cambio filamento. L'area è espressa come poligono di punti nel seguente " +"cambio del filamento. L'area è espressa come punti di poligono nel seguente " "formato: \"XxY, XxY, ...\"" msgid "Bed custom texture" -msgstr "Texture piano personalizzata" +msgstr "Superficie piano personalizzata" msgid "Bed custom model" msgstr "Modello piano personalizzato" @@ -9541,14 +11263,14 @@ msgid "Elephant foot compensation" msgstr "Compensazione zampa d'elefante" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"Questo parametro restringe il primo layer sul piatto di stampa per " +"Questo parametro restringe il primo strato sul piano di stampa per " "compensare l'effetto zampa d'elefante." msgid "Elephant foot compensation layers" -msgstr "Layer di compensazione del piede elefante" +msgstr "Strato di compensazione zampa d'elefante" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9556,50 +11278,58 @@ msgid "" "the next layers will be linearly shrunk less, up to the layer indicated by " "this value." msgstr "" -"Il numero di strati su cui sarà attivo la compensazione del piede degli " -"elefanti. Il primo strato verrà ridotto dal valore di compensazione del " -"piede degli elefanti, quindi gli strati successivi saranno ridotti in modo " -"linearmente ridotto, fino allo strato indicato da questo valore." +"Il numero di strati su cui sarà attiva la compensazione della zampa " +"d'elefante. Il primo strato verrà ridotto in base al valore della " +"compensazione della zampa d'elefante, mentre gli strati successivi saranno " +"ridotti in modo lineare, fino allo strato indicato da questo parametro." msgid "layers" -msgstr "layer" +msgstr "strati" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" -"Indical'altezza di ogni layer. Un'altezza minore del layer implica una " -"maggiore precisione a fronte di un tempo di stampa più lungo." +"Indica l'altezza di ogni strato. Un'altezza minore implica una maggiore " +"precisione a fronte di un tempo di stampa maggiore." msgid "Printable height" msgstr "Altezza di stampa" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "" +"Indica l'altezza massima di stampa, limitata dalle caratteristiche della " +"stampante." + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." msgstr "" -"Indica l'altezza massima stampabile, limitata dall'altezza dell'area di " -"stampa." msgid "Preferred orientation" msgstr "Orientamento preferito" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" -"Orienta automaticamente gli stl sull'asse Z al momento dell'importazione " -"iniziale" +"Orienta automaticamente gli STL sull'asse Z al momento dell'importazione " +"iniziale." msgid "Printer preset names" -msgstr "Nomi dei preset della stampante" +msgstr "Nomi dei profili della stampante" msgid "Use 3rd-party print host" -msgstr "Utilizzare un host di stampa di terze parti" +msgstr "Usa un host di stampa di terze parti" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" -"Consentire il controllo della stampante di BambuLab attraverso host di " -"stampa di terze parti" +"Consente il controllo della stampante di BambuLab attraverso host di stampa " +"di terze parti." msgid "Hostname, IP or URL" -msgstr "Nome host, IP o URL" +msgstr "Nome servizio, IP o URL" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " @@ -9608,20 +11338,21 @@ msgid "" "user name and password into the URL in the following format: https://" "username:password@your-octopi-address/" msgstr "" -"Snapmaker Orca può caricare file di G-code su un host di stampa. Questo campo " +"Snapmaker Orca può caricare i file G-code su un host di stampa. Questo campo " "deve contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza " -"dell'host di stampa. L'host di stampa dietro HAProxy con l'autenticazione di " -"base abilitata è accessibile inserendo il nome utente e la password nell'URL " -"nel seguente formato: https://username:password@your-octopi-address/" +"dell'host di stampa. È possibile accedere ad un servizio di stampaHAProxy " +"con autenticazione di base abilitata, inserendo come URL nome utente e la " +"password nel seguente formato: https://nomeutente:password@iltuo-indirizzo-" +"octopi/" msgid "Device UI" msgstr "Interfaccia utente del dispositivo" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Specificare l'URL dell'interfaccia utente del dispositivo se non corrisponde " -"a print_host" +"a print_host." msgid "API Key / Password" msgstr "Chiave API / Password" @@ -9630,11 +11361,11 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orca può caricare file G-code su un host di stampa. Questo campo deve " -"contenere la chiave API o la password richiesta per l'autenticazione." +"Snapmaker Orca può caricare i file G-code su un host di stampa. Questo campo " +"deve contenere la chiave API o la password richiesta per l'autenticazione." -msgid "Name of the printer" -msgstr "Nome della stampante" +msgid "Name of the printer." +msgstr "Nome della stampante." msgid "HTTPS CA File" msgstr "File CA HTTPS" @@ -9645,8 +11376,9 @@ msgid "" "is used." msgstr "" "È possibile specificare un file di certificato CA personalizzato per le " -"connessioni HTTPS di OctoPrint, in formato crt/pem. Se lasciato vuoto, viene " -"utilizzato l'archivio di certificati CA predefinito del sistema operativo." +"connessioni HTTPS di OctoPrint, nel formato crt/pem. Se lasciato vuoto, " +"verrà utilizzato l'archivio di certificati CA predefinito del sistema " +"operativo." msgid "User" msgstr "Utente" @@ -9663,11 +11395,11 @@ msgid "" "certificates if connection fails." msgstr "" "Ignora i controlli di revoca dei certificati HTTPS in caso di punti di " -"distribuzione mancanti o offline. Si potrebbe voler abilitare questa opzione " -"per i certificati autofirmati se la connessione fallisce." +"distribuzione mancanti o non in linea. Se la connessione per i certificati " +"autofirmati fallisce, dovresti abilitare questa opzione." -msgid "Names of presets related to the physical printer" -msgstr "Nomi dei preset relativi alla stampante" +msgid "Names of presets related to the physical printer." +msgstr "Nomi dei profili relativi alla stampante." msgid "Authorization Type" msgstr "Tipo di autorizzazione" @@ -9676,26 +11408,27 @@ msgid "API key" msgstr "Chiave API" msgid "HTTP digest" -msgstr "HTTP digest" +msgstr "Autenticazione sicura HTTP" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Evita di attraversare le pareti" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -"Devia ed evita di attraversare la parete che potrebbe causare la formazione " -"di blob sulla superficie." +"Devia ed evita di attraversare le pareti per impedire la formazione di grumi " +"sulla superficie." -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Evitare di attraversare le pareti - Lunghezza massima della deviazione" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Distanza massima di deviazione per evitare di attraversare la parete: la " +"Distanza massima di deviazione per evitare di attraversare le pareti. La " "stampante non eseguirà alcuna deviazione se la distanza di deviazione è " "maggiore di questo valore. La lunghezza della deviazione può essere " "specificata come valore assoluto o come percentuale (ad esempio 50%) di uno " @@ -9705,303 +11438,558 @@ msgid "mm or %" msgstr "mm o %" msgid "Other layers" -msgstr "Altri layer" +msgstr "Altri strati" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Cool Plate." - -msgid "°C" -msgstr "°C" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Engineering." +"Indica la temperatura del piatto per tutti gli strati eccetto il primo. Un " +"valore pari a 0 indica che il filamento non supporta la stampa su Piatto a " +"bassa temperatura." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto High Temp." +"Indica la temperatura del piatto per tutti gli strati eccetto il primo. Un " +"valore pari a 0 indica che il filamento non supporta la stampa su Piatto " +"ruvido a bassa temperatura." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Textured PEI." +"Indica la temperatura del piatto per tutti gli strati eccetto il primo. Un " +"valore pari a 0 indica che il filamento non supporta la stampa su Piatto " +"ingegneristico." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Indica la temperatura del piatto per tutti gli strati eccetto il primo. Un " +"valore pari a 0 indica che il filamento non supporta la stampa su Piatto ad " +"alta temperatura." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Indica la temperatura del piatto per tutti gli strati eccetto il primo. Un " +"valore pari a 0 indica che il filamento non supporta la stampa su Piatto PEI " +"ruvido." msgid "Initial layer" -msgstr "Primo layer" +msgstr "Primo strato" msgid "Initial layer bed temperature" -msgstr "Temperatura del piano per il primo layer" +msgstr "Temperatura piatto primo strato" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto Cool Plate." +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto SuperTack a bassa " +"temperatura." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto a bassa temperatura." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto Engineering." +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto ruvido a bassa " +"temperatura." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto High Temp." +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto ingegneristico." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Il valore 0 indica che il " -"filamento non è supportato sul piatto Textured PEI." +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto ad alta temperatura." -msgid "Bed types supported by the printer" -msgstr "Tipi di piatti supportati dalla stampante" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Indica la temperatura del piatto per il primo strato. Un valore pari a 0 " +"indica che il filamento non supporta la stampa su Piatto PEI ruvido." + +msgid "Bed types supported by the printer." +msgstr "Tipi di piatti supportati dalla stampante." msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Engineering Plate" +msgstr "Piatto liscio a bassa temperatura" msgid "Smooth High Temp Plate" +msgstr "Piatto liscio ad alta temperatura" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" msgstr "Sequenza di stampa del primo strato" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "Sequenza di stampa degli altri strati" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "Numero sequenza di stampa degli altri strati" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "Sequenza di filamento degli altri strati" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" -"Questo G-code viene inserito ad ogni cambio layer prima del sollevamento z." +"Questo G-code viene inserito ad ogni nuovo strato prima del sollevamento " +"sull'asse Z." msgid "Bottom shell layers" -msgstr "Layer guscio inferiore" +msgstr "Strati guscio inferiore" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" -"Rappresenta il numero di layer solidi del guscio inferiore, incluso quello " -"della superficie inferiore. Se lo spessore calcolato da questo valore è più " -"sottile dello spessore del guscio inferiore, i layer del guscio inferiore " -"verranno aumentati." +"Indica il numero di strati solidi del guscio inferiore, incluso lo strato " +"della superficie inferiore. Se lo spessore calcolato con questo valore è più " +"sottile dello spessore del guscio inferiore, il numero degli strati del " +"guscio inferiore sarà aumentato." msgid "Bottom shell thickness" -msgstr "Spessore del guscio inferiore" +msgstr "Spessore guscio inferiore" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" -"Il numero di layers solidi inferiori aumenta durante l'elaborazione se lo " -"spessore calcolato dei layers del guscio inferiore è più sottile di questo " -"valore. Questo può evitare di avere un guscio troppo sottile quando " -"l'altezza layer è ridotta. 0 significa che questa impostazione è " -"disabilitata e lo spessore del guscio inferiore è determinato semplicemente " -"dal numero di layers del guscio inferiore." +"Se lo spessore calcolato dal numero di strati del guscio inferiore è più " +"sottile di questo valore, il numero di strati solidi inferiori sarà " +"aumentato durante l'elaborazione. In questo modo si evita di avere un guscio " +"troppo sottile quando l'altezza dello strato è fine. Un valore pari a 0 " +"indica che questa impostazione è disabilitata e che lo spessore del guscio " +"inferiore è determinato dal numero di strati del guscio inferiore." msgid "Apply gap fill" -msgstr "Applicare il riempimento degli spazi vuoti" +msgstr "Applica riempimento spazi vuoti" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Abilita il riempimento degli spazi vuoti per le superfici selezionate. La " -"lunghezza minima degli spazi vuoti che verranno riempiti può essere " -"controllata dall'opzione Filtra piccoli spazi vuoti di seguito.\n" +"Abilita il riempimento degli spazi vuoti per le superfici solide " +"selezionate. La lunghezza minima da riempire può essere regolata " +"dall'opzione 'Filtra piccoli spazi vuoti' qui sotto.\n" "\n" "Opzioni:\n" "1. Ovunque: applica il riempimento degli spazi vuoti alle superfici solide " -"superiori, inferiori e interne\n" +"superiori, inferiori e interne per la massima resistenza\n" "2. Superfici superiore e inferiore: applica il riempimento degli spazi vuoti " -"solo alle superfici superiore e inferiore\n" -"3. Da nessuna parte: disabilita il riempimento degli spazi vuoti\n" +"solo alle superfici superiore e inferiore, bilanciando la velocità di " +"stampa, riducendo la possiblià di sovraestrusione nel riempimento solido e " +"assicurandosi che le superfici superiore e inferiore non presentino fori\n" +"3. Da nessuna parte: disabilita il riempimento degli spazi vuoti per tutte " +"le aree di riempimento solido.\n" +"\n" +"Da notare che se si utilizza il generatore di perimetri classico, è " +"possibile generare anche il riempimento degli spazi tra i perimetri, nel " +"caso in cui non sia possibile inserire una linea a larghezza intera tra di " +"essi. Quel tipo di riempimento non è controllato da questa impostazione.\n" +"\n" +"Se si desidera rimuovere tutti i riempimenti degli spazi vuoti, incluso " +"quello del generatore di perimetri classico, impostare il valore di 'Filtra " +"piccoli spazi vuoti' su un numero elevato, ad esempio 999999.\n" +"\n" +"Tuttavia, questa soluzione non è consigliata, poiché il riempimento degli " +"spazi vuoti tra i perimetri contribuisce alla robustezza del modello. Per i " +"modelli in cui viene generato un riempimento eccessivo degli spazi tra i " +"perimetri, un'alternativa sarebbe quella di utilizzare il generatore di " +"pareti Arachne e controllare la finitura delle superfici superiore e " +"inferiore con questa opzione." msgid "Everywhere" msgstr "Ovunque" msgid "Top and bottom surfaces" -msgstr "Superfici superiore e inferiore" +msgstr "Superfici superiori e inferiori" msgid "Nowhere" msgstr "Da nessuna parte" -msgid "Force cooling for overhang and bridge" -msgstr "Forzare il raffreddamento per sbalzi e ponti" +msgid "Force cooling for overhangs and bridges" +msgstr "Forza raffreddamento per sporgenze e ponti" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Abilita questa opzione per ottimizzare la velocità della ventola di " -"raffreddamento degli oggetti per sporgenze e ponti per ottenere un " -"raffreddamento migliore." +"Abilita questa opzione per consentire la regolazione della velocità della " +"ventola di raffreddamento per sporgenze, ponti interni ed esterni. Regolare " +"la velocità della ventola in modo specifico per questi elementi, può " +"migliorare la qualità complessiva della stampa e ridurre le deformazioni." -msgid "Fan speed for overhang" -msgstr "Velocità della ventola per le sporgenze" +msgid "Overhangs and external bridges fan speed" +msgstr "Velocità ventola per sporgenze e ponti esterni" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Force part cooling fan to be this speed when printing bridges or overhang " -"walls which have a large overhang degree. Forcing cooling for overhangs and " -"bridges can achieve better quality for these parts." +"Utilizza questa velocità della ventola di raffreddamento quando si stampano " +"ponti o pareti sporgenti con una soglia di sporgenza che supera il valore " +"impostato nel parametro in alto 'Soglia raffreddamento sporgenze'. Aumentare " +"il raffreddamento in modo specfico per sporgenze e ponti può migliorare la " +"qualità complessiva di questi elementi.\n" +"\n" +"Si prega di notare che questa velocità è limitata dalla soglia minima di " +"velocità della ventola impostata sopra. Può essere inoltre incrementata fino " +"alla soglia massima di velocità della ventola quando la soglia minima di " +"durata di stampa dello strato non viene raggiunta." -msgid "Cooling overhang threshold" -msgstr "Soglia di sbalzo per il raffreddamento" +msgid "Overhang cooling activation threshold" +msgstr "Soglia di attivazione raffreddamento sporgenze" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Forza la ventola di raffreddamento a una velocità specifica quando il grado " -"di sporgenza della parte stampata supera questo valore. Questo valore è " -"espresso in percentuale e indica la larghezza della linea senza il supporto " -"dei layer. 0%% significa forzare il raffreddamento per tutta la parete " -"esterna, indipendentemente dal grado di sporgenza." +"Quando una sporgenza supera questa soglia, forza la ventola di " +"raffreddamento a funzionare alla velocità impostata in 'Velocità ventola " +"sporgenze'. Questa soglia è espressa in percentuale, indicando la porzione " +"della larghezza di ogni linea che non è supportata dallo strato sottostante. " +"Impostando questo valore su 0%, forza la ventola di raffreddamento a " +"funzionare per tutte le pareti esterne, indipendentemente dal grado di " +"sporgenza." -msgid "Bridge infill direction" -msgstr "Direzione di riempimento del ponte" +msgid "External bridge infill direction" +msgstr "Angolo riempimento ponti esterni" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -"Sovrascrivere l'angolo del Bridge. Il valore 0 significa che l'angolo di " -"collegamento verrà calcolato automaticamente. Altrimenti l'angolo fornito " -"verrà utilizzato per i Bridge esterni. Usa 180° per un angolo zero." +"Sovrascrive l'angolo di riempimento dei ponti. Un valore pari a 0 indica che " +"l'angolo di riempimento verrà calcolato automaticamente. Il valore fornito " +"verrà utilizzato per i ponti esterni. Utilizzare 180° per l'angolo zero." -msgid "Bridge density" -msgstr "Densità del bridge" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" -"Densità di ponti esterni. 100% significa solido ponte. L'impostazione " -"predefinita è al 100%." - -msgid "Bridge flow ratio" -msgstr "Flusso del Bridge" +msgid "Internal bridge infill direction" +msgstr "Angolo riempimento ponti interni" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Diminuire leggermente questo valore (ad esempio 0.9) per ridurre la quantità " -"di materiale per il ponte e migliorare l'abbassamento dello stesso" +"Sovrascrive l'angolo di riempimento dei ponti interni. Se lasciato a zero, " +"l'angolo di riempimento verrà calcolato automaticamente. Il valore fornito " +"verrà utilizzato per i ponti interni. Utilizzare 180° per l'angolo zero.\n" +"\n" +"Si consiglia di lasciare questo valore a 0, a meno che il modello non lo " +"richieda." + +msgid "External bridge density" +msgstr "Densità ponti esterni" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Controlla la densità (spaziatura) delle linee dei ponti esterni. 100% indica " +"un ponte solido. Il valore predefinito è 100%.\n" +"\n" +"I ponti esterni a densità inferiore possono contribuire a migliorare " +"l'affidabilità poiché c'è più spazio per far circolare l'aria attorno al " +"ponte estruso, migliorandone la velocità di raffreddamento." + +msgid "Internal bridge density" +msgstr "Densità ponti interni" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Controlla la densità (spaziatura) delle linee dei ponti interni. 100% indica " +"un ponte solido. Il valore predefinito è 100%.\n" +"\n" +"I ponti interni a densità inferiore possono contribuire a ridurre le lacune " +"o fori della superficie superiore e a migliorare l'affidabilità, poiché c'è " +"più spazio per far circolare l'aria attorno al ponte estruso, migliorandone " +"la velocità di raffreddamento.\n" +"\n" +"Questa opzione funziona particolarmente bene se combinata con la seconda " +"opzione di riempimento dei ponti interni, migliorando ulteriormente la " +"struttura interna dei ponti prima che il riempimento solido venga estruso." + +msgid "Bridge flow ratio" +msgstr "Flusso di stampa ponti" + +msgid "" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Diminuisci leggermente questo valore (ad esempio 0,9) per ridurre la " +"quantità di filamento estruso per i ponti e tendere il materiale.\n" +"\n" +"Il flusso effettivo utilizzato nei ponti viene calcolato moltiplicando " +"questo valore con il flusso di stampa del filamento e, se impostato, con il " +"flusso di stampa dell'oggetto." msgid "Internal bridge flow ratio" -msgstr "Rapporto Flusso del bridge interno" +msgstr "Flusso di stampa ponti interni" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"Questo valore governa lo spessore dello strato del bridge interno. Questo è " -"il primo strato sopra il riempimento. Riduci leggermente questo valore (ad " -"esempio 0.9) per migliorare la qualità della superficie sopra il riempimento." +"Questo valore regola lo spessore dello strato dei ponti interni. È il primo " +"strato sopra il riempimento sparso. Ridurre leggermente questo valore (ad " +"esempio 0,9) per migliorare la qualità della superficie sopra i riempimenti " +"radi.\n" +"Il flusso effettivo utilizzato nei ponti interni viene calcolato " +"moltiplicando questo valore con il flusso di stampa dei ponti, flusso di " +"stampa del filamento e, se impostato, con il flusso di stampa dell'oggetto." msgid "Top surface flow ratio" -msgstr "Rapporto di portata superficiale superiore" +msgstr "Flusso di stampa superficie superiore" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Questo fattore influisce sulla quantità di materiale per il riempimento " -"solido superiore. Puoi diminuirlo leggermente per avere una finitura " -"superficiale liscia" +"Questo valore influenza la quantità di materiale utilizzata per il " +"riempimento solido della superficie superiore. Puoi diminuirlo leggermente " +"per avere una finitura liscia sulla superficie.\n" +"\n" +"Il flusso di stampa effettivo utilizzato nelle superfici superiori viene " +"calcolato moltiplicando questo valore con il flusso di stampa del filamento " +"e, se impostato, con il flusso di stampa dell'oggetto." msgid "Bottom surface flow ratio" -msgstr "Rapporto di flusso della superficie inferiore" +msgstr "Flusso di stampa superficie inferiore" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Questo valore influenza la quantità di materiale utilizzata per il " +"riempimento solido della superficie inferiore.\n" +"\n" +"Il flusso di stampa effettivo utilizzato nelle superfici inferiori viene " +"calcolato moltiplicando questo valore con il flusso di stampa del filamento " +"e, se impostato, con il flusso di stampa dell'oggetto." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Questo fattore influisce sulla quantità di materiale per il riempimento " -"solido inferiore" msgid "Precise wall" msgstr "Parete precisa" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Migliora la precisione del guscio regolando lo spaziamento della parete " -"esterna. Ciò migliora anche la coerenza dello strato.\n" -"Nota: Questa impostazione avrà effetto solo se la sequenza della parete è " -"configurata su Interno-Esterno." msgid "Only one wall on top surfaces" -msgstr "Solo una parete sulle superfici superiori" +msgstr "Solo una parete su superfici superiori" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" -"Usa solo una parete su superfici piane, per dare più spazio alla trama " -"riempimento superiore" +"Utilizza una sola parete su superfici superiori piane, per dare più spazio " +"al motivo di riempimento superiore." msgid "One wall threshold" -msgstr "Soglia a una parete" +msgstr "Soglia singola parete" #, no-c-format, no-boost-format msgid "" @@ -10014,62 +12002,62 @@ msgid "" "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" -"Se una superficie superiore deve essere stampata ed è parzialmente coperta " -"da un altro strato, non verrà considerata in un livello superiore in cui la " -"sua larghezza è inferiore a questo valore. Questo può essere utile per non " -"lasciare che il \"un perimetro in cima\" si attivi su una superficie che " -"dovrebbe essere coperta solo da perimetri. Questo valore può essere un mm o " -"un % of della larghezza di estrusione del perimetro.\n" -"Attenzione: se abilitato, è possibile creare artefatti se si hanno alcune " -"caratteristiche sottili sul livello successivo, come le lettere. Impostare " -"questa impostazione su 0 per rimuovere questi artefatti." +"Se una superficie superiore che deve essere stampata è parzialmente coperta " +"da un altro strato, non verrà considerata in uno strato superiore in cui la " +"sua larghezza è inferiore a questo valore. Può essere utile per non lasciare " +"che si attivi l'opzione 'Solo una parete su superfici superiori. Questo " +"valore può essere espresso in mm o una % della larghezza di estrusione del " +"perimetro.\n" +"Attenzione: se abilitato, potrebbe creare artefatti se nello strato " +"successivo si hanno elementi sottili, come le lettere. Impostare questa " +"opzione su 0 per rimuovere questi artefatti." msgid "Only one wall on first layer" -msgstr "Solo un perimetro sul primo layer" +msgstr "Solo una parete sul primo strato" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" -"Utilizzare un solo muro sul primo strato, per dare più spazio al modello di " -"riempimento inferiore" +"Utilizza una sola parete sul primo strato, per dare più spazio al motivo di " +"riempimento inferiore." msgid "Extra perimeters on overhangs" -msgstr "Perimetri aggiuntivi sulle sporgenze (sperimentale)" +msgstr "Pareti aggiuntive su sporgenze" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Creare percorsi perimetrali aggiuntivi su strapiombi ripidi e aree in cui i " -"ponti non possono essere ancorati. " +"Crea pareti aggiuntive su sporgenze ripide e aree in cui i ponti non possono " +"essere ancorati." -msgid "Reverse on odd" -msgstr "Retromarcia su dispari" +msgid "Reverse on even" +msgstr "Inverti su strati pari" msgid "Overhang reversal" -msgstr "Inversione di sbalzo" +msgstr "Inverti sporgenze" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Estrudere i perimetri che hanno una parte su una sporgenza in direzione " -"inversa su layer dispari. Questo schema alternato può migliorare " -"drasticamente gli strapiombi ripidi.\n" +"Estrude le pareti che hanno una parte sopra una sporgenza nella direzione " +"inversa su strati pari. Questo schema alternato può migliorare drasticamente " +"le sporgenze ripide.\n" "\n" -"Questa impostazione può anche contribuire a ridurre la deformazione della " -"parte grazie alla riduzione delle sollecitazioni nelle pareti della parte." +"Questa impostazione può anche contribuire a ridurre la deformazione delle " +"parti grazie alla riduzione delle sollecitazioni nelle pareti." msgid "Reverse only internal perimeters" -msgstr "Inversione solo perimetri interni" +msgstr "Inverti solo pareti interne" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10078,44 +12066,43 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Applicare la logica dei perimetri inversi solo ai perimetri interni. \n" +"Applica l'inversione solo alle pareti interne.\n" "\n" "Questa impostazione riduce notevolmente le sollecitazioni delle parti poiché " -"ora sono distribuite in direzioni alternate. Ciò dovrebbe ridurre la " -"deformazione delle parti mantenendo al contempo la qualità delle pareti " -"esterne. Questa caratteristica può essere molto utile per materiali soggetti " -"a deformazione, come ABS/ASA, e anche per filamenti elastici, come TPU e " -"Silk PLA. Può anche aiutare a ridurre la deformazione sulle regioni " -"fluttuanti sui supporti.\n" +"vengono distribuite in direzioni alternate. Ciò dovrebbe ridurre la " +"deformazione mantenendo la qualità della parete esterna. Questa funzione può " +"essere molto utile per materiali inclini alla deformazione, come ABS/ASA, ma " +"anche per filamenti elastici come TPU e Silk PLA. Può anche aiutare a " +"ridurre la deformazione su regioni sospese sopra i supporti.\n" "\n" -"Affinché questa impostazione sia la più efficace, si consiglia di impostare " -"la soglia inversa su 0 in modo che tutte le pareti interne vengano stampate " -"in direzioni alternate sugli strati dispari, indipendentemente dal loro " -"grado di sporgenza." +"Per ottenere la massima efficacia da questa impostazione, si consiglia di " +"immettere una Soglia di inversione pari a 0, in modo che tutte le pareti " +"interne vengano stampate in direzioni alternate su strati pari, " +"indipendentemente dal grado di sporgenza." msgid "Bridge counterbore holes" -msgstr "Fori per controbolo del ponte" +msgstr "Ponti fori svasati" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" -"Questa opzione consente di creare ponti per i fori di lamatura, " -"consentendone la stampa senza supporto. Le modalità disponibili includono:\n" -"1. Nessuno: non viene creato alcun bridge.\n" +"Questa opzione consente di creare ponti per i fori svasati, consentendone la " +"stampa senza supporto. Le modalità disponibili sono:\n" +"1. Nessuno: non viene creato alcun ponte\n" "2. Parzialmente collegato: solo una parte dell'area non supportata verrà " -"colmata.\n" -"3. Strato sacrificale: viene creato un livello ponte sacrificale completo." +"collegata\n" +"3. Strato sacrificale: viene creato uno strato-ponte sacrificale completo" msgid "Partially bridged" -msgstr "Parzialmente ponticellato" +msgstr "Parzialmente collegato" msgid "Sacrificial layer" msgstr "Strato sacrificale" @@ -10124,201 +12111,251 @@ msgid "Reverse threshold" msgstr "Soglia inversa" msgid "Overhang reversal threshold" -msgstr "Soglia di inversione a sbalzo" +msgstr "Soglia di inversione sporgenze" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Numero di mm di sbalzo necessario affinché l'inversione sia considerata " -"utile. Può essere un % o della larghezza del perimetro.\n" -"Il valore 0 abilita l'inversione su tutti i livelli dispari a prescindere." - -msgid "Classic mode" -msgstr "Modalità classica" - -msgid "Enable this option to use classic mode" -msgstr "Abilita questa opzione per utilizzare la modalità classica" +"Numero di millimetri di cui deve essere la sporgenza affinché l'inversione " +"sia considerata utile. Può essere una % della larghezza della parete.\n" +"Il valore 0 permette di abilitare l'inversione su tutti gli strati pari.\n" +"Se 'Rileva sporgenza' non è abilitata, questa opzione viene ignorata e " +"l'inversione avviene indipendentemente su tutti gli strati pari." msgid "Slow down for overhang" msgstr "Rallenta in caso di sporgenze" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" -"Abilita questa opzione per rallentare quando la stampa presenta sporgenze. " -"Le velocità per le diverse percentuali di sporgenza sono indicate di seguito." +"Abilita questa opzione per rallentare la stampa in base ai diversi gradi di " +"sporgenza." msgid "Slow down for curled perimeters" -msgstr "Rallenta per perimetri arricciati" +msgstr "Rallenta per pareti incurvate" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Attivare questa opzione per rallentare la stampa nelle aree in cui possono " -"esistere potenziali perimetri arricciati" +"Abilita questa opzione per rallentare la stampa nelle aree in cui potrebbero " +"potenzialmente formarsi deformazioni delle pareti verso l'alto. Ad esempio, " +"la velocità sarà ridotta ulteriormente durante la stampa di sporgenze su " +"angoli stretti, come la prua dello scafo della Benchy, riducendo la " +"deformazione che può accumularsi su più strati.\n" +"\n" +"In genere si consiglia di attivare questa opzione a meno che il " +"raffreddamento della stampante non sia sufficientemente potente o la " +"velocità di stampa sufficientemente lenta da impedire la deformazione delle " +"pareti. Se si stampano le pareti esterne con un'elevata velocità, questo " +"parametro potrebbe introdurre lievi artefatti durante il rallentamento a " +"causa della grande variazione nella velocità di stampa. Se si notano " +"artefatti, assicurarsi che l'anticipo di pressione sia regolato " +"correttamente.\n" +"\n" +"Nota: quando questa opzione è abilitata, le pareti sporgenti vengono " +"trattati come sporgenze, il che significa che la velocità utilizzata per le " +"sporgenze viene applicata anche se la parete sporgente fa parte di un ponte. " +"Ad esempio, quando le pareti sono sporgenti al 100%, senza alcun muro che li " +"supporti dal basso, verrà applicata la velocità per le sporgente al 100%." msgid "mm/s or %" msgstr "mm/s o %" -msgid "External" -msgstr "Esterno" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Indica la velocità per i bridge e le pareti completamente a sbalzo." - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Velocità di estrusione dei ponti visibili esternamente.\n" +"\n" +"Inoltre, se 'Rallenta per pareti incurvate' è disabilitato o è abilitata la " +"modalità Sporgenza classica, la velocità di stampa delle pareti sporgenti " +"supportate sarà inferiore al 13%, indipendentemente dal fatto che facciano " +"parte di un ponte o di una sporgenza." msgid "Internal" msgstr "Interno" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Velocità del ponte interno. Se il valore è espresso in percentuale, verrà " -"calcolato in base al bridge_speed. Il valore predefinito è 150%." +"Velocità dei ponti interni. Se il valore è espresso in percentuale, verrà " +"calcolato in base a bridge_speed. Il valore predefinito è 150%." msgid "Brim width" -msgstr "Larghezza brim" +msgstr "Larghezza tesa" -msgid "Distance from model to the outermost brim line" -msgstr "Questa è la distanza tra il modello e la linea del brim più esterno." +msgid "Distance from model to the outermost brim line." +msgstr "Questa è la distanza tra il modello e la linea più esterna della tesa." msgid "Brim type" -msgstr "Tipo di brim" +msgstr "Tipo di tesa" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"Questo controlla la generazione del brim esterno e/o interno dei modelli. " -"Auto significa che la larghezza del brim viene analizzata e calcolata " +"Controlla la generazione della tesa esterna e/o interna dei modelli. Se " +"impostato ad Auto, la larghezza della tesa viene analizzata e calcolata " "automaticamente." msgid "Brim-object gap" -msgstr "Distanza Brim-Oggetto " +msgstr "Spazio tesa-oggetto" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"Questo crea un gap tra la linea interna del brim e l'oggetto per rendere il " -"brim più facile da rimuovere" +"Crea uno spazio tra la linea più interna della tesa e l'oggetto per rendere " +"più facile la rimozione della tesa." msgid "Brim ears" -msgstr "Brim a Orecchie" +msgstr "Tesa ad orecchio" msgid "Only draw brim over the sharp edges of the model." -msgstr "Disegna il brim solo sugli spigoli vivi del modello." +msgstr "Disegna la tesa solo sugli spigoli vivi del modello." msgid "Brim ear max angle" -msgstr "Angolo massimo del Brim a Orecchie" +msgstr "Angolo massimo della tesa ad orecchio" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Angolo massimo per far apparire un Brim a orecchie \n" -"Se impostato su 0, non verrà creato alcun Brim. \n" -"Se impostato su ~180, il brim verrà creato su tutto tranne che sulle sezioni " +"Angolo massimo per far apparire una tesa ad orecchio \n" +"Se impostato su 0, non verrà creata alcuna tesa.\n" +"Se impostato su ~180, la tesa verrà creata su tutto tranne che sulle sezioni " "diritte." msgid "Brim ear detection radius" -msgstr "Raggio di rilevamento del Brim a Orecchie" +msgstr "Raggio di rilevamento tesa ad orecchio" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -"La geometria verrà decimata prima di rilevare gli angoli acuti. Questo " +"La geometria verrà decimata prima di rilevare gli spigoli vivi. Questo " "parametro indica la lunghezza minima dello scostamento per la decimazione.\n" -"0 per disattivare" +"0 per disattivare." -msgid "Compatible machine" -msgstr "Macchina compatibile" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "macchina compatibile con versioni successive" -msgid "Compatible machine condition" -msgstr "Condizione della macchina compatibile" - -msgid "Compatible process profiles" -msgstr "Profili di processo compatibili" - -msgid "Compatible process profiles condition" -msgstr "Condizione dei profili di processo compatibili" - -msgid "Print sequence, layer by layer or object by object" +msgid "Condition" msgstr "" -"Questo determina la sequenza di stampa, che consente di stampare layer per " -"layer o oggetto per oggetto." + +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Un'espressione booleana che usa i valori di configurazione di un profilo " +"stampante attivo. Se questa espressione produce un risultato vero, questo " +"profilo si considera compatibile con il profilo stampante attivo." + +msgid "Select profiles" +msgstr "" + +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Un'espressione booleana che usa i valori di configurazione di un profilo di " +"stampa attivo. Se questa espressione produce un risultato vero, questo " +"profilo si considera compatibile con il profilo di stampa attivo." + +msgid "Print sequence, layer by layer or object by object." +msgstr "" +"Determina la sequenza di stampa, che consente di stampare strato per strato " +"o oggetto per oggetto." msgid "By layer" -msgstr "Per layer" +msgstr "Per strato" msgid "By object" msgstr "Per oggetto" msgid "Intra-layer order" -msgstr "Ordine intra-layer" +msgstr "Ordine intra-strato" -msgid "Print order within a single layer" -msgstr "Ordine di stampa all'interno di un singolo livello" +msgid "Print order within a single layer." +msgstr "Ordine di stampa all'interno di un singolo strato." msgid "As object list" msgstr "Come elenco di oggetti" msgid "Slow printing down for better layer cooling" -msgstr "Rallenta stampa per un migliore raffreddamento layers" +msgstr "Rallenta stampa per miglior raffreddamento degli strati" msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" -"Abilita questa opzione per rallentare la velocità di stampa in modo che il " -"tempo finale del layer non sia inferiore alla soglia di tempo nel valore " -"\"Soglia di velocità massima della ventola\", in modo che il layer possa " -"essere raffreddato più a lungo.\n" -"Ciò può migliorare la qualità per i piccoli dettagli" +"Abilita questa opzione per rallentare la velocità di stampa in modo che la " +"durata di stampa finale dello strato non sia inferiore alla soglia di durata " +"di stampa dello strato in \"Soglia velocità massima della ventola\", in modo " +"che lo strato possa essere raffreddato più a lungo.\n" +"Ciò può migliorare la qualità per i piccoli dettagli." msgid "Normal printing" msgstr "Stampa normale" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" -"Indica l'accelerazione predefinita sia per la stampa normale che per la " -"corsa dopo il primo layer." - -msgid "mm/s²" -msgstr "mm/s²" +"Accelerazione predefinita sia per la stampa normale che per gli spostamenti, " +"eccetto lo strato iniziale." msgid "Default filament profile" msgstr "Profilo filamento predefinito" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" -"Profilo filamento predefinito quando si passa a questo profilo macchina" +"Profilo filamento predefinito quando si passa a questo profilo macchina." msgid "Default process profile" msgstr "Profilo di processo predefinito" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "" -"Profilo di processo predefinito quando si passa a questo profilo macchina" +"Profilo di processo predefinito quando si passa a questo profilo macchina." msgid "Activate air filtration" -msgstr "Attivare la filtrazione dell'aria" +msgstr "Attivare filtrazione dell'aria" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" @@ -10329,161 +12366,227 @@ msgid "Fan speed" msgstr "Velocità ventola" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -"Velocità della ventola di scarico durante la stampa. Questa velocità " -"sovrascriverà la velocità nel gcode personalizzato del filamento" +"Velocità della ventola di estrazione durante la stampa. Questo parametro " +"sovrascriverà il valore della velocità nel G-code personalizzato del " +"filamento." -msgid "Speed of exhaust fan after printing completes" -msgstr "Velocità della ventola di estrazione al termine della stampa" +msgid "Speed of exhaust fan after printing completes." +msgstr "Velocità ventola di estrazione al termine della stampa." msgid "No cooling for the first" -msgstr "Nessun raffreddamento per il primo" +msgstr "Nessun raffreddamento per primi strati" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"Spegnere tutte le ventole di raffreddamento per i primi layer. Questo può " -"servire a migliorare l'adesione del piatto di stampa." +"Spegne tutte le ventole di raffreddamento per i primi strati. Può servire a " +"migliorare l'adesione del piano di stampa." msgid "Don't support bridges" -msgstr "Non supportare i bridge" +msgstr "Non supportare i ponti" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" -"This disables supporting bridges, which decreases the amount of support " -"required. Bridges can usually be printed directly without support over a " -"reasonable distance." +"Evita di creare i supporti lungo tutta l'area del ponte. I ponti possono " +"essere solitamente stampati senza supporti nel caso non siano troppo lunghi." -msgid "Thick bridges" -msgstr "Bridge spessi" +msgid "Thick external bridges" +msgstr "Ponti esterni spessi" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" -"Se abilitato, i bridge sono più affidabili e possono colmare distanze " -"maggiori, ma potrebbero avere un aspetto peggiore. Se disattivato, avrannoun " -"aspetto migliore ma sono affidabili solo per le distanze ridotte." +"Se abilitato, i ponti sono più affidabili e possono colmare distanze " +"maggiori, ma potrebbero avere un aspetto peggiore. Se disattivato, avranno " +"un aspetto migliore ma sono affidabili solo per distanze ridotte." msgid "Thick internal bridges" -msgstr "Bridge interni spessi" +msgstr "Ponti interni spessi" msgid "" "If enabled, thick internal bridges will be used. It's usually recommended to " "have this feature turned on. However, consider turning it off if you are " "using large nozzles." msgstr "" -"Se abilitato, verranno utilizzati bridge interni spessi. Di solito si " +"Se abilitato, verranno utilizzati ponti interni spessi. Di solito si " "consiglia di attivare questa funzione. Tuttavia, considera di disattivarlo " "se stai utilizzando ugelli di grandi dimensioni." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Non filtrare i piccoli ponti interni (beta)" +msgid "Extra bridge layers (beta)" +msgstr "Strati ponte aggiuntivi (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Questa opzione può contribuire a ridurre l'effetto 'pillowing' sulle " -"superfici superiori nei modelli fortemente inclinati o curvi.\n" +"Questa opzione consente la generazione di un ulteriore strato di ponti " +"interni e/o esterni.\n" "\n" +"Gli strati di ponte aggiuntivi aiutano a migliorare l'aspetto e " +"l'affidabilità del ponte, poiché il riempimento solido è sostenuto in " +"maniera migliore. Ciò è particolarmente utile nelle stampanti veloci, in cui " +"le velocità di estrusione dei ponti e del riempimento solido variano " +"notevolmente. Gli strati di ponte aggiuntivi determinano una riduzione delle " +"lacune o fori sulle superfici superiori, nonché una ridotta separazione " +"dello strato dei ponti esterni dalle pareti circostanti.\n" "\n" -"Per impostazione predefinita, i piccoli bridge interni vengono filtrati e il " -"riempimento solido interno viene stampato direttamente sul riempimento." -"Questo metodo funziona bene nella maggior parte dei casi, velocizzando la " -"stampa senza compromettere troppo la qualità della superficie superiore.\n" +"In genere si consiglia di impostare almeno su 'Solo ponti esterni', a meno " +"che non vengano riscontrati problemi specifici con il modello elaborato.\n" "\n" -"Tuttavia, in modelli fortemente inclinati o curvi, soprattutto se si " -"utilizza una densità di riempimento troppo bassa, potrebbe comportare " -"l'arricciamento del riempimento solido non supportato, causando il " -"pillowing.\n" -"\n" -"Abilitando questa opzione, lo strato del bridge interno verrà stampato su un " -"riempimento solido interno leggermente non supportato. Le opzioni " -"sottostanti controllano la quantità di filtraggio, ovvero la quantità di " -"bridge interni creati.\n" -"\n" -"Disabilitato - Disabilita questa opzione. Indica il comportamento " -"predefinito e funziona bene nella maggior parte dei casi.\n" -"\n" -"Filtro limitato - Crea bridge interni su superfici fortemente inclinate, " -"evitando di creare bridge interni non necessari. Funziona bene per la " -"maggior parte dei modelli difficili.\n" -"\n" -"Nessun filtraggio - Crea bridge interni su ogni potenziale sporgenza " -"interna. Questa opzione è utile per i modelli con superficie superiore " -"fortemente inclinata. Tuttavia, nella maggior parte dei casi crea troppi " -"bridge non necessari." +"Opzioni:\n" +"1. Disabilitato: non genera secondi strati di ponti. Questa è l'impostazione " +"predefinita ed è impostata\n" +"per scopi di compatibilità.\n" +"2. Solo ponti esterni: genera secondi strati di ponti solo per ponti " +"esterni. Da notare che i ponti più corti o più stretti del numero di " +"perimetri impostato verranno ignorati in quanto non trarrebbero vantaggio da " +"un secondo strato di ponte. Se generato, il secondo strato di ponte verrà " +"estruso parallelamente al primo strato per aumentare la resistenza del " +"ponte.\n" +"3. Solo ponti interni: genera secondi strati di ponti solo per ponti interni " +"su riempimento sparso. Da notare che i ponti interni vengono considerati per " +"il conteggio degli strati del guscio superiore del modello. Il secondo " +"strato di ponte interno verrà estruso il più perpendicolarmente possibile " +"rispetto al primo. Se nella stessa isola sono presenti più regioni con " +"angoli di ponte variabili, l'ultima regione di quell'isola verrà selezionata " +"come riferimento angolare.\n" +"4. Applica a tutti: genera secondi strati di ponti sia per i ponti interni " +"che esterni\n" msgid "Disabled" msgstr "Disabilitato" +msgid "External bridge only" +msgstr "Solo ponti esterni" + +msgid "Internal bridge only" +msgstr "Solo ponti interni" + +msgid "Apply to all" +msgstr "Applica a tutti" + +msgid "Filter out small internal bridges" +msgstr "Filtra piccoli ponti interni" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Questa opzione può aiutare a ridurre le lacune o fori sulle superfici " +"superiori nei modelli molto inclinati o curvi.\n" +"Per impostazione predefinita, i ponti piccoli interni vengono filtrati e il " +"riempimento solido interno viene estruso direttamente sul riempimento " +"sparso. Ciò funziona bene nella maggior parte dei casi, velocizzando la " +"stampa senza compromettere troppo la qualità della superficie superiore.\n" +"Tuttavia, nei modelli molto inclinati o curvi, in particolare quando viene " +"utilizzata una densità di riempimento rado troppo bassa, ciò potrebbe " +"causare deformazioni nel riempimento solido senza supporto e lacune o fori.\n" +"Abilitando 'Filtraggio limitato' o 'Nessun filtraggio' farà in modo che lo " +"strato di ponti interni sia stampato sul riempimento solido interno con " +"pochi supporti. Le opzioni sottostanti controllano la sensibilità del " +"filtraggio, ovvero controllano dove vengono creati i ponti interni.\n" +"1. Filtra: abilita questa opzione. Questo è il comportamento predefinito e " +"funziona bene nella maggior parte dei casi\n" +"2. Filtraggio limitato: crea ponti interni su superfici fortemente inclinate " +"evitando ponti non necessari. Funziona bene per la maggior parte dei modelli " +"complessi\n" +"3. Nessun filtraggio: crea ponti interni su ogni potenziale sporgenza " +"interna. Questa opzione è utile per modelli di superficie superiore " +"fortemente inclinati; tuttavia, nella maggior parte dei casi, crea troppi " +"ponti non necessari" + msgid "Limited filtering" -msgstr "Filtro limitato" +msgstr "Filtraggio limitato" msgid "No filtering" msgstr "Nessun filtraggio" msgid "Max bridge length" -msgstr "Lunghezza massima Bridge" +msgstr "Lunghezza massima ponti" msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"Questa è la lunghezza massima dei ponti che non necessitano di supporto. " -"Impostalo su 0 se desideri che tutti i bridge siano supportati e impostalo " -"su un valore molto grande se non vuoi che nessun bridge sia supportato." +"Questa è la lunghezza massima dei ponti che non necessitano di supporti. " +"Impostalo su 0 se desideri che tutti i ponti abbiano supporti o su un valore " +"molto grande se non vuoi che i ponti abbiano supporti." msgid "End G-code" msgstr "G-code finale" -msgid "End G-code when finish the whole printing" -msgstr "Aggiungi G-code quando si termina l'intera stampa." +msgid "End G-code when finishing the entire print." +msgstr "G-code finale quando si termina la stampa." -msgid "Between Object Gcode" -msgstr "Tra Gcode oggetto" +msgid "Between Object G-code" +msgstr "G-code tra oggetti" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"Inserire Gcode tra gli oggetti. Questo parametro avrà effetto solo quando si " -"stampano i modelli oggetto per oggetto" +"Inserisce il G-code tra gli oggetti. Questo parametro avrà effetto solo " +"quando si stampano i modelli 'per oggetto'." -msgid "End G-code when finish the printing of this filament" -msgstr "Aggiungi G-code quando si termina la stampa di questo filamento." +msgid "End G-code when finishing the printing of this filament." +msgstr "G-code finale quando si termina la stampa di questo filamento." msgid "Ensure vertical shell thickness" msgstr "Garantisci spessore verticale del guscio" @@ -10499,12 +12602,12 @@ msgid "" "Default value is All." msgstr "" "Aggiunge un riempimento solido in prossimità di superfici inclinate per " -"garantire lo spessore verticale del guscio (layers solidi superiori e " +"garantire lo spessore verticale del guscio (strati solidi superiori e " "inferiori)\n" "Nessuno: Non viene aggiunto alcun riempimento solido. Attenzione: utilizzare " "questa opzione con precauzione se il modello presenta superfici inclinate\n" -"Solo Critico: Evitare l'aggiunta di riempimenti solidi per le pareti\n" -"Moderato: Aggiungere il riempimento solido solo per le superfici fortemente " +"Solo Critico: Evita l'aggiunta di riempimenti solidi per le pareti\n" +"Moderato: Aggiunge il riempimento solido solo per le superfici fortemente " "inclinate.\n" "Tutto: aggiunge un riempimento solido per tutte le superfici inclinate " "idonee\n" @@ -10517,17 +12620,10 @@ msgid "Moderate" msgstr "Moderato" msgid "Top surface pattern" -msgstr "Trama superfice superiore" +msgstr "Motivo superfice superiore" -msgid "Line pattern of top surface infill" -msgstr "" -"Questo è la Trama lineare per il riempimento della superficie superiore." - -msgid "Concentric" -msgstr "Concentrico" - -msgid "Rectilinear" -msgstr "Rettilineo" +msgid "Line pattern of top surface infill." +msgstr "Motivo per il riempimento della superficie superiore." msgid "Monotonic" msgstr "Monotonico" @@ -10535,9 +12631,15 @@ msgstr "Monotonico" msgid "Monotonic line" msgstr "Linea monotonica" +msgid "Rectilinear" +msgstr "Rettilineo" + msgid "Aligned Rectilinear" msgstr "Rettilineo allineato" +msgid "Concentric" +msgstr "Concentrico" + msgid "Hilbert Curve" msgstr "Curva di Hilbert" @@ -10545,33 +12647,33 @@ msgid "Archimedean Chords" msgstr "Corde di Archimede" msgid "Octagram Spiral" -msgstr "Spirale a Ottogramma" +msgstr "Spirale a ottogramma" msgid "Bottom surface pattern" -msgstr "Trama superficie inferiore" +msgstr "Motivo superficie inferiore" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" -"Questo è la trama lineare del riempimento della superficie inferiore, " -"escluso il riempimento del ponte." +"Motivo per il riempimento della superficie inferiore, escluso il riempimento " +"dei ponti." msgid "Internal solid infill pattern" -msgstr "Schema di riempimento solido interno" +msgstr "Motivo riempimento solido interno" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " "infill be enabled, the concentric pattern will be used for the small area." msgstr "" -"Modello di linea del riempimento solido interno. Se l'opzione Rileva " -"riempimento solido interno Nattow è abilitata, il motivo concentrico verrà " -"utilizzato per l'area piccola." +"Motivo per il riempimento solido interno. Se l'opzione 'Rileva riempimento " +"solido interno stretto' è abilitata, il motivo Concentrico verrà utilizzato " +"per le aree più piccole." msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea della parete esterna. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Larghezza della linea della parete esterna. Se espresso come una %, verrà " +"calcolato sul diametro dell'ugello." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " @@ -10590,28 +12692,28 @@ msgid "" "example: 80%) it will be calculated on the outer wall speed setting above. " "Set to zero for auto." msgstr "" -"Questa impostazione separata influenzerà la velocità dei perimetri con " +"Questa impostazione influenzerà la velocità di stampa dei perimetri con " "raggio <= small_perimeter_threshold (di solito fori). Se espresso in " "percentuale (ad esempio: 80%) verrà calcolato sull'impostazione della " -"velocità della parete esterna di cui sopra. Impostare su zero per auto." +"velocità delle pareti esterne di cui sopra. Impostare su zero per auto." msgid "Small perimeters threshold" -msgstr "Soglia perimetrale ridotta" +msgstr "Soglia perimetri piccoli" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" -"In questo modo viene impostata la soglia per la lunghezza del perimetro " -"ridotta. La soglia predefinita è 0 mm" +"Imposta la soglia per la lunghezza dei perimetri piccoli. La soglia " +"predefinita è 0 mm." msgid "Walls printing order" -msgstr "Ordine Stampa Pareti" +msgstr "Ordine stampa pareti" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10621,40 +12723,37 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Sequenza di stampa delle pareti interne (interne) ed esterne (esterne). \n" +"Sequenza di stampa delle pareti interne ed esterne.\n" "\n" -"Utilizzare Interno/Esterno per le migliori sporgenze. Questo perché le " -"pareti sporgenti possono aderire a un perimetro vicino durante la stampa. " -"Tuttavia, questa opzione comporta una qualità della superficie leggermente " -"ridotta poiché il perimetro esterno viene deformato dall'essere schiacciato " -"sul perimetro interno.\n" +"Utilizzare Interno/Esterno per sporgenze migliori. Questo perché le pareti " +"sporgenti possono aderire a un perimetro vicino durante la stampa. Tuttavia, " +"questa opzione comporta una qualità della superficie leggermente ridotta " +"poiché il perimetro esterno viene deformato dalla pressione sul perimetro " +"interno.\n" "\n" "Utilizzare Interno/Esterno/Interno per ottenere la migliore finitura " -"superficiale esterna e precisione dimensionale poiché la parete esterna " -"viene stampata indisturbata da un perimetro interno. Tuttavia, le " -"prestazioni di sporgenza si ridurranno in quanto non c'è un perimetro " -"interno contro cui stampare la parete esterna. Questa opzione richiede un " -"minimo di 3 pareti per essere efficace in quanto stampa prima le pareti " -"interne dal 3° perimetro in poi, poi il perimetro esterno e, infine, il " -"primo perimetro interno. Nella maggior parte dei casi, questa opzione è " -"consigliata rispetto all'opzione Esterno/Interno. \n" +"superficiale esterna e la migliore precisione dimensionale, poiché la parete " +"esterna viene stampata senza essere disturbata dal perimetro interno. " +"Tuttavia, la qualità delle sporgenze si ridurrà poiché non si dispone di un " +"perimetro interno contro cui stampare la parete esterna. Questa opzione " +"richiede un minimo di 3 pareti per essere efficace, in quanto stampa prima " +"le pareti interne dal 3° perimetro in poi, poi il perimetro esterno e, " +"infine, il primo perimetro interno. Nella maggior parte dei casi, questa è " +"l'opzione consigliata rispetto a Esterno/Interno.\n" "\n" "Utilizzare Esterno/Interno per ottenere la stessa qualità della parete " "esterna e gli stessi vantaggi di precisione dimensionale dell'opzione " -"Interno/Esterno/Interno. Tuttavia, le giunzioni z appariranno meno coerenti " -"quando la prima estrusione di un nuovo livello inizia su una superficie " -"visibile.\n" -" " +"Interno/Esterno/Interno. Tuttavia, le cuciture Z appariranno meno coerenti " +"quando la prima estrusione di un nuovo strato inizia su una superficie " +"visibile." msgid "Inner/Outer" msgstr "Interna/Esterna" @@ -10673,40 +12772,50 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" +"Ordine di stampa della parete/riempimento. Quando la casella non è " +"selezionata, le pareti vengono stampate per prime, il che funziona meglio " +"nella maggior parte dei casi.\n" +"\n" +"Stampare prima il riempimento può aiutare con sporgenze estreme, poiché le " +"pareti hanno il riempimento adiacente a cui aderire. Tuttavia, il " +"riempimento farà pressione sulle pareti stampate nel punto di unione, " +"causando una finitura superficiale esterna peggiore. Può anche far " +"trasparire il riempimento attraverso le superfici esterne del modello." msgid "Wall loop direction" -msgstr "Direzione del loop del muro" +msgstr "Direzione perimetri di stampa" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"La direzione in cui vengono estrusi i loop del muro quando si guarda verso " -"il basso dall'alto.\n" +"Direzione in cui vengono estrusi i perimetri di stampa quando si guarda " +"dall'alto verso il basso.\n" "\n" -"Per impostazione predefinita, tutti i muri vengono estrusi in senso " -"antiorario, a meno che non sia abilitata l'opzione Inverti su dispari. " -"Impostando questa opzione su qualsiasi opzione diversa da Auto si forzerà la " -"direzione del muro indipendentemente dall'inversione su dispari.\n" +"Per impostazione predefinita, tutte le pareti vengono estruse in senso " +"antiorario, a meno che non sia abilitata l'opzione 'Inverti su strati pari'. " +"Impostandolo su un'opzione diversa da Auto, la direzione di stampa dei " +"perimetri verrà forzata indipendentemente dall'opzione 'Inverti su strati " +"pari'.\n" "\n" -"Questa opzione sarà disabilitata se è abilitata la modalità vaso sprial." +"Questa opzione verrà disabilitata se è abilitata la modalità vaso a spirale." msgid "Counter clockwise" -msgstr "Antiorario" +msgstr "Senso antiorario" msgid "Clockwise" -msgstr "In senso orario" +msgstr "Senso orario" msgid "Height to rod" msgstr "Altezza asta" @@ -10715,34 +12824,34 @@ msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"Distanza dalla punta del nozzle all'asta inferiore. Utilizzato per evitare " -"le collisioni nella stampa di oggetto per oggetto." +"Distanza dalla punta dell'ugello all'asta inferiore. Utilizzato per evitare " +"le collisioni nella stampa Per oggetto." msgid "Height to lid" -msgstr "Altezza dal coperchio" +msgstr "Altezza coperchio" msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." msgstr "" -"Distanza dalla punta del nozzle al coperchio. Utilizzato per evitare le " -"collisioni nella stampa oggetto per oggetto." +"Distanza dalla punta dell'ugello al coperchio. Utilizzato per evitare le " +"collisioni nella stampa Per oggetto." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." msgstr "" "Raggio di sicurezza attorno all'estrusore: utilizzato per evitare collisioni " -"nella stampa per oggetto." +"nella stampa Per oggetto." msgid "Nozzle height" -msgstr "Altezza nozzle" +msgstr "Altezza ugello" msgid "The height of nozzle tip." -msgstr "L'altezza punta del nozzle." +msgstr "L'altezza della punta dell'ugello." msgid "Bed mesh min" -msgstr "Maglia del letto min" +msgstr "Punto minimo matrice piatto" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10754,19 +12863,19 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Questa opzione imposta il punto minimo per l'area della mesh del letto " -"consentita. A causa dell'offset XY della sonda, la maggior parte delle " -"stampanti non è in grado di sondare l'intero letto. Per garantire che il " -"punto della sonda non esca dall'area del letto, i punti minimo e massimo " -"della rete del letto devono essere impostati in modo appropriato. Snapmaker Orca " -"garantisce che i valori adaptive_bed_mesh_min/adaptive_bed_mesh_max non " -"superino questi punti min/max. Queste informazioni possono in genere essere " -"ottenute dal produttore della stampante. L'impostazione predefinita è " -"(-99999, -99999), il che significa che non ci sono limiti, consentendo così " -"il rilevamento su tutto il letto." +"Questa opzione imposta il punto minimo per l'area consentita della matrice " +"del piatto. A causa della compensazione XY della sonda, la maggior parte " +"delle stampanti non è in grado di sondare l'intero piatto. Per garantire che " +"il punto della sonda non esca dall'area del piatto, i punti minimo e massimo " +"della matrice del piatto devono essere impostati in modo appropriato. " +"Snapmaker Orca garantisce che i valori adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max non superino questi punti min/max. In genere queste " +"informazioni possono essere ottenute dal produttore della stampante. " +"L'impostazione predefinita è (-99999, -99999), il che significa che non ci " +"sono limiti, consentendo così di sondare l'intero piatto." msgid "Bed mesh max" -msgstr "Maglia letto max" +msgstr "Punto massimo matrice piatto" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10778,130 +12887,303 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Questa opzione imposta il punto massimo per l'area della mesh del letto " -"consentita. A causa dell'offset XY della sonda, la maggior parte delle " -"stampanti non è in grado di sondare l'intero letto. Per garantire che il " -"punto della sonda non esca dall'area del letto, i punti minimo e massimo " -"della rete del letto devono essere impostati in modo appropriato. Snapmaker Orca " -"garantisce che i valori adaptive_bed_mesh_min/adaptive_bed_mesh_max non " -"superino questi punti min/max. Queste informazioni possono in genere essere " -"ottenute dal produttore della stampante. L'impostazione predefinita è " -"(99999, 99999), il che significa che non ci sono limiti, consentendo così di " -"sondare l'intero letto." +"Questa opzione imposta il punto massimo per l'area consentita della matrice " +"del piatto. A causa della compensazione XY della sonda, la maggior parte " +"delle stampanti non è in grado di sondare l'intero piatto. Per garantire che " +"il punto della sonda non esca dall'area del piatto, i punti minimo e massimo " +"della matrice del piatto devono essere impostati in modo appropriato. " +"Snapmaker Orca garantisce che i valori adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max non superino questi punti min/max. In genere queste " +"informazioni possono essere ottenute dal produttore della stampante. " +"L'impostazione predefinita è (99999, 99999), il che significa che non ci " +"sono limiti, consentendo così di sondare l'intero piatto." msgid "Probe point distance" -msgstr "Distanza del punto della sonda" +msgstr "Distanza punti sonda" msgid "" "This option sets the preferred distance between probe points (grid size) for " "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" "Questa opzione imposta la distanza preferita tra i punti della sonda " -"(dimensione della griglia) per le direzioni X e Y, con il valore di default " +"(dimensione della griglia) per le direzioni X e Y, con il valore predefinito " "di 50 mm sia per X che per Y." msgid "Mesh margin" -msgstr "Margine mesh" +msgstr "Margine matrice" msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." msgstr "" "Questa opzione determina la distanza aggiuntiva in base alla quale l'area " -"della mesh del letto adattivo deve essere espansa nelle direzioni XY." +"della matrice del piatto adattiva deve essere espansa nelle direzioni XY." + +msgid "Grab length" +msgstr "" msgid "Extruder Color" msgstr "Colore estrusore" -msgid "Only used as a visual help on UI" -msgstr "Utilizzato solo come aiuto visivo per l'interfaccia utente" +msgid "Only used as a visual help on UI." +msgstr "Utilizzato solo come aiuto visivo per l'interfaccia utente." msgid "Extruder offset" -msgstr "Offset estrusore" +msgstr "Compensazione estrusore" msgid "Flow ratio" -msgstr "Rapporto di flusso" +msgstr "Flusso di stampa" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Il materiale può subire variazioni volumetriche dopo il passaggio dallo " "stato fuso a quello cristallino. Questa impostazione modifica in modo " -"proporzionale tutti i flussi di estrusione di questo filamento in G-code. " -"L'intervallo di valori raccomandato è compreso tra 0,95 e 1,05. È possibile " -"regolare questo valore per ottenere una superficie piatta se si verifica una " -"leggera sovra-estrusione o sotto-estrusione." - -msgid "Enable pressure advance" -msgstr "Abilita l'avanzamento della pressione" +"proporzionale tutti i flussi di estrusione di questo filamento nel G-code. " +"L'intervallo di valori raccomandato è compreso tra 0,95 e 1,05. Se si " +"verifica una leggera sovraestrusione o sottoestrusione, è possibile regolare " +"questo valore per ottenere una superficie piatta." msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Il materiale può subire variazioni volumetriche dopo il passaggio dallo " +"stato fuso a quello cristallino. Questa impostazione modifica in modo " +"proporzionale tutti i flussi di estrusione di questo filamento nel G-code. " +"L'intervallo di valori raccomandato è compreso tra 0,95 e 1,05. Se si " +"verifica una leggera sovraestrusione o sottoestrusione, è possibile regolare " +"questo valore per ottenere una superficie piatta.\n" +"\n" +"Il flusso di estrusione finale dell'oggetto è questo valore moltiplicato per " +"il flusso di stampa del filamento." + +msgid "Enable pressure advance" +msgstr "Abilita anticipo di pressione" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Abilita l'avanzamento della pressione, il risultato della calibrazione " -"automatica verrà sovrascritto una volta abilitato." +"Abilita l'anticipo di pressione. Il risultato della calibrazione automatica " +"verrà sovrascritto una volta abilitata." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Anticipo di pressione (Klipper) AKA Fattore di avanzamento lineare (Marlin)" +"Anticipo di pressione (Klipper), anche conosciuto come Fattore di " +"avanzamento lineare (Marlin)" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Abilita anticipo di pressione adattiva (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Con l'aumento delle velocità di stampa (e quindi della portata volumetrica " +"attraverso l'ugello) e delle accelerazioni, è stato osservato che il valore " +"AP effettivo in genere diminuisce. Ciò significa che un singolo valore AP " +"non è sempre ottimale al 100% per tutti gli elementi e di solito viene " +"utilizzato un valore di compromesso che non causi troppi rigonfiamenti sugli " +"elementi stampati con velocità di flusso e accelerazioni più basse e, al " +"tempo stesso, non causi buchi su quelli stampati più velocemente.\n" +"\n" +"Questa funzione mira a risolvere questa limitazione, modellando la risposta " +"del sistema di estrusione della stampante in base alla portata volumetrica e " +"all'accelerazione a cui sta stampando. Internamente, genera un modello " +"adattato che può estrapolare l'anticipo di pressione necessaria per " +"qualsiasi portata volumetrica e accelerazione, valore che verrà poi emesso " +"alla stampante in base alle condizioni di stampa correnti.\n" +"\n" +"Se abilitato, il valore di anticipo di pressione sopra riportato viene " +"sovrascritto. Tuttavia, si consiglia vivamente un valore predefinito " +"ragionevole che possa fungere da ripiego e per quando si effettua il cambio " +"di testina.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Misurazioni anticipo di pressione adattiva (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Aggiungi i valori di anticipo di pressione (AP), portata volumetrica e " +"accelerazione secondo le prove effettuate, separati da una virgola. Digita " +"un gruppo di valori per riga. Ad esempio\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Come calibrare:\n" +"1. Esegui il test dell'anticipo di pressione per almeno 3 velocità per ogni " +"valore di accelerazione. Si consiglia di eseguire il test almeno per la " +"velocità delle pareti esterne, la velocità delle pareti interne e la " +"velocità di stampa più rapida nel tuo profilo (solitamente è il riempimento " +"sparso o solido), quindi eseguire i test con queste velocità per ogni valore " +"di accelerazione, dal più lento al più veloce. Non superare l'accelerazione " +"massima consigliata fornita dal firmware Klipper\n" +"2. Prendi nota del valore AP ottimale per ogni portata volumetrica e " +"accelerazione. Puoi trovare il numero relativo alla portata volumetrica dal " +"menu a discesa dello schema di colori e spostando il cursore orizzontale " +"sulle linee del modello AP. Il numero dovrebbe essere visibile nella parte " +"inferiore della pagina. Il valore AP ideale dovrebbe decrescere " +"all'aumentare della portata volumetrica. In caso contrario, verifica che " +"l'estrusore funzioni correttamente. Più lentamente e con meno accelerazione " +"stampi, più ampio è l'intervallo di valori AP accettabili. Se non è visibile " +"alcuna differenza, usa il valore AP dal test più veloce\n" +"3. Inserisci le triplette dei valori di anticipo di pressione, portata e " +"accelerazione nella casella di testo qui e salva il tuo profilo di filamento" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Abilita anticipo di pressione adattiva per sporgenze (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Abilita l'anticipo di pressione adattiva per le sporgenze e per quando il " +"flusso varia all'interno dello stesso elemento. Questa è un'opzione " +"sperimentale, poiché se il profilo AP non è impostato in modo accurato, " +"causerà problemi di uniformità sulle superfici esterne prima e dopo le " +"sporgenze.\n" + +msgid "Pressure advance for bridges" +msgstr "Anticipo di pressione per ponti" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Valore di anticipo di pressione per i ponti. Impostare su 0 per " +"disabilitare.\n" +"\n" +"Un valore AP più basso durante la stampa di ponti aiuta a ridurre la " +"comparsa di una leggera sottoestrusione subito dopo l'estrusione dei ponti. " +"Ciò è causato dalla caduta di pressione nell'ugello durante la stampa in " +"aria e un anticipo di pressione più basso aiuta a contrastarla." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." msgstr "" "Larghezza di linea predefinita se le altre larghezze di linea sono impostate " -"su 0. Se espresso come %, verrà calcolato sul diametro del nozzle." +"su 0. Se espresso come una %, verrà calcolato sul diametro del ugello." msgid "Keep fan always on" msgstr "Mantieni la ventola sempre accesa" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Se si attiva questa impostazione, la ventola di raffreddamento non si " "arresterà mai del tutto, ma funzionerà almeno alla velocità minima per " "ridurre la frequenza di avvio e arresto." msgid "Don't slow down outer walls" -msgstr "" +msgstr "Non rallentare su pareti esterne" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"Se abilitata, questa impostazione garantirà che le pareti esterne non " +"vengano stampate a velocità minore per soddisfare la durata di stampa minima " +"dello strato. Ciò è particolarmente utile negli scenari seguenti:\n" +"1. Per evitare cambiamenti di brillantezza durante la stampa di filamenti " +"lucidi\n" +"2. Per evitare cambiamenti di velocità nella stampa delle pareti esterne che " +"potrebbero creare lievi artefatti sulle pareti (bande asse Z)\n" +"3. Per evitare di stampare a velocità che causano VFA (artefatti fini) sulle " +"pareti esterne" msgid "Layer time" -msgstr "Layer time" +msgstr "Durata strato" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" -"La ventola di raffreddamento parziale verrà attivata per i layer in cui il " -"tempo stimato è inferiore a questo valore. La velocità della ventola viene " -"interpolata tra la velocità minima e massima della ventola in base al tempo " -"di stampa a layer." +"La ventola di raffreddamento verrà attivata per gli strati in cui il tempo " +"stimato è inferiore a questo valore. La velocità della ventola varierà tra " +"la velocità minima e massima in base alla durata stimata di stampa dello " +"strato." msgid "Default color" msgstr "Colore predefinito" -msgid "Default filament color" -msgstr "Colore predefinito del filamento" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Note filamento" @@ -10910,56 +13192,120 @@ msgid "You can put your notes regarding the filament here." msgstr "È possibile inserire qui le note riguardanti il filamento." msgid "Required nozzle HRC" -msgstr "Necessita nozzle HRC" +msgstr "HRC ugello richiesta" msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"HRC minimo del nozzle richiesto per stampare il filamento. Un valore pari a " -"0 significa che non viene controllato l'HRC del nozzle." +"Durezza minima (secondo la scala di Rockwell) dell'ugello richiesta per " +"stampare il filamento. Un valore pari a 0 vuol dire che la durezza " +"dell'ugello non verrà controllata." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" -"Questa indica il volume del filamento che può essere fuso ed estruso al " -"secondo. La velocità di stampa è limitata dalla velocità volumetrica " -"massima, in caso di impostazione della velocità troppo alta e irragionevole. " +"Questa impostazione indica il volume del filamento che può essere fuso ed " +"estruso al secondo. Nel caso la velocità di stampa impostata sia troppo " +"alta, questa viene limitata in base alla velocità volumetrica massima. " "Questo valore non può essere zero." -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Durata caricamento filamento" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tempo di caricamento del nuovo filamento quando si cambia filamento, solo a " -"fini statistici." +"Durata di caricamento del nuovo filamento. Di solito è applicabile per " +"macchine multimateriale a singolo estrusore. Per le macchine con cambio di " +"testina o multitestina, di solito è 0. Solo a fini statistici." msgid "Filament unload time" msgstr "Durata scaricamento filamento" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tempo di scarico vecchio filamento quando si cambia filamento, solo a fini " -"statistici." +"Durata di scaricamento del vecchio filamento. Di solito è applicabile per " +"macchine multimateriale a singolo estrusore. Per le macchine con cambio di " +"testina o multitestina, di solito è 0. Solo a fini statistici." + +msgid "Tool change time" +msgstr "Durata cambio testina" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Tempo impiegato per cambiare testina. Di solito è applicabile per le " +"macchine con cambio di testina o multitestina. Per le macchine " +"multimateriale a estrusore singolo, è in genere 0. Solo a fini statistici." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Il diametro del filamento viene utilizzato per calcolare le variabili di " "estrusione nel G-code, quindi è importante che sia accurato e preciso." msgid "Pellet flow coefficient" -msgstr "" +msgstr "Coefficiente di flusso granuli" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10967,30 +13313,68 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"Il coefficiente di flusso dei materiali a granuli è ricavato empiricamente e " +"consente il calcolo del volume per le stampanti a granuli.\n" +"\n" +"Internamente viene convertito in filament_diameter. Tutti gli altri calcoli " +"del volume rimangono gli stessi.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" -msgstr "Restringimento" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Restringimento (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" "Inserisci la percentuale di restringimento che il filamento otterrà dopo il " -"raffreddamento (94% if misuri 94 mm invece di 100 mm). La parte verrà " -"scalata in xy per compensare. Viene preso in considerazione solo il " +"raffreddamento (94% se misuri 94 mm invece di 100 mm). La parte verrà " +"scalata in XY per compensazione. Viene preso in considerazione solo il " "filamento utilizzato per il perimetro.\n" "Assicurarsi di lasciare uno spazio sufficiente tra gli oggetti, poiché " "questa compensazione viene eseguita dopo i controlli." +msgid "Shrinkage (Z)" +msgstr "Restringimento (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Inserisci la percentuale di restringimento che il filamento otterrà dopo il " +"raffreddamento (94% se misuri 94 mm invece di 100 mm). La parte verrà " +"scalata in Z per compensazione." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Velocità di caricamento" msgid "Speed used for loading the filament on the wipe tower." -msgstr "Velocità utilizzata per caricare il filamento sulla torre di pulitura." +msgstr "Velocità utilizzata per caricare il filamento sulla torre di spurgo." msgid "Loading speed at the start" msgstr "Velocità iniziale di caricamento" @@ -11002,11 +13386,12 @@ msgid "Unloading speed" msgstr "Velocità di scaricamento" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"Velocità usata per scaricare il filamento sulla torre di pulitura (non " -"influisce sulla parte iniziale dello scaricamento dopo il ramming)." +"Velocità usata per scaricare il filamento sulla torre di spurgo (non " +"influisce sulla parte iniziale dello scaricamento dopo l'operazione di " +"modellazione della punta del filamento)." msgid "Unloading speed at the start" msgstr "Velocità iniziale di scaricamento" @@ -11015,22 +13400,22 @@ msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" "Velocità utilizzata per scaricare la punta del filamento immediatamente dopo " -"il ramming." +"l'operazione di modellazione della punta del filamento." msgid "Delay after unloading" msgstr "Ritardo dopo lo scarico" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Tempo di attesa dopo lo scarico del filamento. Può aiutare ad ottenere cambi " -"affidabili con materiali flessibili che potrebbero richiedere più tempo per " -"tornare alle dimensioni originali." +"di testina affidabili con materiali flessibili che potrebbero richiedere più " +"tempo per tornare alle dimensioni originali." msgid "Number of cooling moves" -msgstr "Numero di movimenti di raffreddamento" +msgstr "Numero movimenti di raffreddamento" msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " @@ -11039,6 +13424,25 @@ msgstr "" "Il filamento è raffreddato venendo spostato avanti e indietro nei tubi di " "raffreddamento. Specificare il numero desiderato di questi movimenti." +msgid "Stamping loading speed" +msgstr "Velocità di caricamento timbratura" + +msgid "Speed used for stamping." +msgstr "Velocità utilizzata per la timbratura." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Distanza di timbratura misurata dal centro del tubo di raffreddamento" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Se impostato su un valore diverso da zero, il filamento viene spostato verso " +"l'ugello tra i singoli movimenti nei tubi di raffreddamento (\"timbratura" +"\"). Questa opzione configura la durata di questo movimento prima che il " +"filamento venga nuovamente retratto." + msgid "Speed of the first cooling move" msgstr "Velocità del primo movimento di raffreddamento" @@ -11048,7 +13452,7 @@ msgstr "" "velocità." msgid "Minimal purge on wipe tower" -msgstr "Spurgo minimo sulla torre di pulitura" +msgstr "Estrusione minima su torre di spurgo" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -11057,12 +13461,12 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Dopo un cambio di strumento, l'esatta posizione del filamento appena " -"caricato dentro l'ugello potrebbe essere sconosciuta, e la pressione del " -"filamento probabilmente non è ancora stabile. Prima di spurgare la testina " -"di stampa nel riempimento o in un oggetto sacrificale, Snapmaker Orca " -"posizionerà questo materiale in una torre di pulitura al fine di ottenere " -"una successiva estrusione affidabile su oggetto sacrificale o riempimento." +"Dopo un cambio di testina, l'esatta posizione del filamento appena caricato " +"dentro l'ugello potrebbe essere sconosciuta, e la pressione del filamento " +"potrebbe non essere stabile. Prima di estrudere materiale su un riempimento " +"o un oggetto sacrificale, Snapmaker Orca posizionerà questo materiale in una " +"torre di spurgo al fine di ottenere una successiva estrusione affidabile su " +"oggetti sacrificali o riempimenti." msgid "Speed of the last cooling move" msgstr "Velocità dell'ultimo movimento di raffreddamento" @@ -11071,202 +13475,268 @@ msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" "I movimenti di raffreddamento accelerano gradualmente verso questa velocità." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) per " -"il caricamento del nuovo filamento durante il cambio strumento (quando viene " -"eseguito il T code). Questa durata viene aggiunta alla stima del tempo " -"totale di stampa del G-code." - msgid "Ramming parameters" -msgstr "Parametri del ramming" +msgstr "Parametri modellazione filamento" msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" -"Questa stringa viene controllata da RammingDialog e contiene parametri " -"specifici del ramming." +"Questa stringa è stata modifcata da RammingDialog e contiene parametri " +"specifici per l'operazione di modellazione della punta del filamento." + +msgid "Enable ramming for multi-tool setups" +msgstr "Abilita modellazione filamento per configurazioni multitestina" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -"Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) per " -"lo scaricamento del nuovo filamento durante il cambio strumento (quando " -"viene eseguito il T code). Questa durata viene aggiunta alla stima del tempo " -"totale di stampa del G-code." +"Esegue l'operazione di modellazione della punta del filamento quando si usa " +"una stampante multitestina (Ad esempio, quando l'opzione 'Estrusore singolo " +"multimateriale' nelle impostazioni della stampante è deselezionata.). Se " +"abilitato, una piccola quantità di filamento viene estrusa rapidamente sulla " +"torre di spurgo appena prima del cambio di testina. Questa opzione viene " +"utilizzata solo quando la torre di spurgo è abilitata." -msgid "Enable ramming for multitool setups" -msgstr "Abilita ramming per configurazioni multitool" +msgid "Multi-tool ramming volume" +msgstr "Volume modellazione filamento multitestina" -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +msgid "The volume to be rammed before the tool change." +msgstr "Volume di filamento da modellare prima del cambio di testina." + +msgid "Multi-tool ramming flow" +msgstr "Flusso modellazione filamento multitestina" + +msgid "Flow used for ramming the filament before the tool change." msgstr "" -"Esegue il ramming quando si usa una stampante multitool (Ad esempio, quando " -"l'opzione \"Multimateriale a estrusore singolo\" nelle impostazioni della " -"stampante è deselezionata.). Quando è selezionata, una piccola quantità di " -"filamento viene estrusa rapidamente sulla torre di pulitura appena prima del " -"cambio strumento. Questa opzione viene utilizzata solo quando la torre di " -"pulitura è abilitata." - -msgid "Multitool ramming volume" -msgstr "Volume ramming multitool" - -msgid "The volume to be rammed before the toolchange." -msgstr "Il volume di ramming prima del cambio strumento." - -msgid "Multitool ramming flow" -msgstr "Flusso ramming multitool" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "Flusso usato per il ramming del filamento prima del cambio strumento." +"Flusso usato per l'operazione di modellazione della punta del filamento " +"prima del cambio di testina." msgid "Density" msgstr "Densità" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Densità filamento, solo a fini statistici." -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" -msgstr "Tipo di filamento" +msgid "The material type of filament." +msgstr "Tipo di materiale del filamento." msgid "Soluble material" msgstr "Materiale solubile" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" +"Il materiale solubile viene comunemente utilizzato per stampare supporti e " +"interfacce di supporto." + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." msgstr "" -"Il materiale solubile viene comunemente utilizzato per stampare il supporto " -"e l'interfaccia di supporto" msgid "Support material" msgstr "Materiale di supporto" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"Il materiale di supporto viene comunemente utilizzato per stampare supporti " +"e interfacce di supporto." + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" -"Il materiale di supporto viene comunemente utilizzato per stampare il " -"supporto e le interfacce di supporto." msgid "Softening temperature" msgstr "Temperatura di ammorbidimento" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Il materiale si ammorbidisce a questa temperatura, quindi quando la " -"temperatura del letto è uguale o superiore ad essa, si consiglia vivamente " -"di aprire la porta d'ingresso e/o rimuovere il vetro superiore per evitare " +"temperatura del piatto è uguale o superiore ad essa, si consiglia vivamente " +"di aprire la porta anteriore e/o rimuovere il vetro superiore per evitare " "ostruzioni." msgid "Price" msgstr "Prezzo" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Prezzo del filamento, solo a fini statistici." msgid "money/kg" msgstr "soldi/kg" msgid "Vendor" -msgstr "Venditore" +msgstr "Produttore" -msgid "Vendor of filament. For show only" -msgstr "Venditore di filamenti. Solo per lo spettacolo" +msgid "Vendor of filament. For show only." +msgstr "Produttore del filamento. Solo per dettagli." msgid "(Undefined)" msgstr "(Indefinito)" msgid "Sparse infill direction" -msgstr "" +msgstr "Direzione riempimento sparso" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Questo è l'angolo della trama di riempimento che controlla l'inizio o la " +"Angolo per il motivo del riempimento sparso, che controlla l'inizio o la " "direzione principale delle linee." msgid "Solid infill direction" -msgstr "" +msgstr "Direzione riempimento solido" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" +"Angolo per il motivo del riempimento solido, che controlla l'inizio o la " +"direzione principale delle linee." msgid "Sparse infill density" -msgstr "Densità riempimento" +msgstr "Densità riempimento sparso" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" +"Densità del riempimento sparso interno. 100% trasforma il riempimento sparso " +"in riempimento solido e verrà utilizzato il motivo del riempimento solido " +"interno." + +msgid "Align infill direction to model" +msgstr "Allinea direzione riempimento al modello" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "Riempimento multilinea" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" -"Densità del riempimento sparso interno, 100% turns verrà utilizzato tutto il " -"riempimento sparso nel riempimento solido e il modello di riempimento solido " -"interno" msgid "Sparse infill pattern" -msgstr "Trama riempimento" +msgstr "Motivo riempimento sparso" -msgid "Line pattern for internal sparse infill" -msgstr "Questo è la trama lineare per il riempimento interno." +msgid "Line pattern for internal sparse infill." +msgstr "Motivo delle linee per il riempimento sparso interno." -msgid "Grid" -msgstr "Griglia" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Linea" -msgid "Cubic" -msgstr "Cubico" +msgid "Grid" +msgstr "Griglia" msgid "Tri-hexagon" msgstr "Tri-esagono" -msgid "Gyroid" -msgstr "Giroide" - -msgid "Honeycomb" -msgstr "Nido d'ape" +msgid "Cubic" +msgstr "Cubico" msgid "Adaptive Cubic" -msgstr "Adattivo Cubico" +msgstr "Cubico adattivo" -msgid "3D Honeycomb" -msgstr "Nido d'ape 3D" +msgid "Quarter Cubic" +msgstr "Quarto cubico" msgid "Support Cubic" msgstr "Supporto cubico" msgid "Lightning" -msgstr "Lightning" +msgstr "Fulmine" + +msgid "Honeycomb" +msgstr "Nido d'ape" + +msgid "3D Honeycomb" +msgstr "Nido d'ape 3D" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "Reticolo 2D" msgid "Cross Hatch" -msgstr "Cross Hatch" +msgstr "Trama incrociata" + +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Giroide" + +msgid "Lateral lattice angle 1" +msgstr "Angolo reticolo 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"L'angolo della prima serie di elementi reticolari 2D nell'asse Z. Zero è " +"verticale." + +msgid "Lateral lattice angle 2" +msgstr "Angolo reticolo 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"L'angolo della seconda serie di elementi reticolari 2D nell'asse Z. Zero è " +"verticale." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" msgid "Sparse infill anchor length" -msgstr "Lunghezza dell'ancora di riempimento sparsa" +msgstr "Lunghezza ancoraggio riempimento sparso" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11276,24 +13746,23 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" -"Collegare una linea di riempimento a un perimetro interno con un breve " -"segmento di un perimetro aggiuntivo. Se espresso in percentuale (esempio: " -"15%) viene calcolato sulla larghezza di estrusione del riempimento. Orca " -"Slicer tenta di collegare due linee di riempimento ravvicinate a un breve " -"segmento perimetrale. Se non viene trovato alcun segmento perimetrale più " -"corto di infill_anchor_max, la linea di riempimento viene collegata a un " -"segmento perimetrale su un solo lato e la lunghezza del segmento perimetrale " -"preso è limitata a questo parametro, ma non più lunga di " -"anchor_length_max. \n" +"Collega una linea di riempimento ad una parete interna con un breve segmento " +"di perimetro aggiuntivo. Se espresso in percentuale (esempio: 15%) viene " +"calcolato sulla larghezza di estrusione del riempimento. Snapmaker Orca tenta di " +"collegare due linee di riempimento vicine ad un breve segmento di perimetro. " +"Se non viene trovato alcun segmento di perimetro più corto di " +"infill_anchor_max, la linea di riempimento viene collegata a un segmento di " +"perimetro su un solo lato e la lunghezza del segmento è limitata da questo " +"parametro, ma non superiore a anchor_length_max.\n" "Impostare questo parametro su zero per disabilitare i perimetri di " "ancoraggio collegati a una singola linea di riempimento." msgid "0 (no open anchors)" -msgstr "0 (senza ancore aperte)" +msgstr "0 (senza ancoraggi aperti)" msgid "1000 (unlimited)" msgstr "1000 (senza limiti)" @@ -11309,42 +13778,41 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" -"Collegare una linea di riempimento a un perimetro interno con un breve " -"segmento di un perimetro aggiuntivo. Se espresso in percentuale (esempio: " -"15%) viene calcolato sulla larghezza di estrusione del riempimento. Orca " -"Slicer tenta di collegare due linee di riempimento ravvicinate a un breve " -"segmento perimetrale. Se non viene trovato alcun segmento perimetrale più " -"corto di questo parametro, la linea di riempimento viene collegata a un " -"segmento perimetrale su un solo lato e la lunghezza del segmento perimetrale " -"preso è limitata a infill_anchor, ma non più lunga di questo parametro. \n" +"Collega una linea di riempimento ad una parete interna con un breve segmento " +"di un perimetro aggiuntivo. Se espresso in percentuale (esempio: 15%) viene " +"calcolato sulla larghezza di estrusione del riempimento. Snapmaker Orca tenta di " +"collegare due linee di riempimento vicine a un breve segmento di perimetro. " +"Se non viene trovato alcun segmento di perimetro più corto di questo " +"parametro, la linea di riempimento viene collegata a un segmento di " +"perimetro su un solo lato e la lunghezza del segmento è limitata da " +"infill_anchor, ma non superiore a questo parametro.\n" "Se impostato a 0, verrà utilizzato il vecchio algoritmo per la connessione " -"di riempimento, che dovrebbe creare lo stesso risultato di 1000 e 0." +"del riempimento, che dovrebbe creare lo stesso risultato di 1000 e 0." msgid "0 (Simple connect)" msgstr "0 (Connessione semplice)" -msgid "Acceleration of outer walls" -msgstr "Accelerazione delle pareti esterne" +msgid "Acceleration of outer walls." +msgstr "Accelerazione delle pareti esterne." -msgid "Acceleration of inner walls" -msgstr "Accelerazione delle pareti interne" +msgid "Acceleration of inner walls." +msgstr "Accelerazione delle pareti interne." -msgid "Acceleration of travel moves" -msgstr "Accelerazione massima per gli spostamenti" +msgid "Acceleration of travel moves." +msgstr "Accelerazione per gli spostamenti." msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" -"Questa è l'accelerazione del riempimento della superficie superiore. " -"L'utilizzo di un valore inferiore può migliorare la qualità della superficie " -"superiore." +"Accelerazione del riempimento della superficie superiore. L'utilizzo di un " +"valore inferiore può migliorare la qualità della superficie superiore." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Accelerazione della parete esterna: l'utilizzo di un valore inferiore può " "migliorare la qualità." @@ -11353,7 +13821,7 @@ msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." msgstr "" -"Accelerazione dei ponti. Se il valore è espresso in percentuale (ad es. " +"Accelerazione dei ponti. Se il valore è espresso in percentuale (ad esempio " "50%), verrà calcolato in base all'accelerazione della parete esterna." msgid "mm/s² or %" @@ -11363,7 +13831,7 @@ msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Accelerazione del riempimento rado. Se il valore è espresso in percentuale " +"Accelerazione del riempimento sparso. Se il valore è espresso in percentuale " "(ad esempio 100%), verrà calcolato in base all'accelerazione predefinita." msgid "" @@ -11377,80 +13845,94 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" -"Questa è l'accelerazione di stampa per il primo layer. L'uso di \n" -"un'accelerazione limitata può migliorare l'adesione sul piatto di stampa" +"Accelerazione di stampa per il primo strato. Utilizzando un valore " +"inferiore, è possibile migliorare l'adesione sul piano di stampa." msgid "Enable accel_to_decel" msgstr "Abilita accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "La max_accel_to_decel di Klipper verrà regolata automaticamente" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "" +"Il valore max_accel_to_decel di Klipper verrà regolato automaticamente." msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -"La max_accel_to_decel di Klipper sarà adattata a questo %% di accelerazione" +"Il valore max_accel_to_decel di Klipper verrà regolato su questa %% di " +"accelerazione." -msgid "Jerk of outer walls" -msgstr "Jerk delle pareti esterne" +msgid "Default jerk." +msgstr "" -msgid "Jerk of inner walls" -msgstr "Jerk delle pareti interne" +msgid "Junction Deviation" +msgstr "" -msgid "Jerk for top surface" -msgstr "Jerk per la superficie superiore" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" -msgid "Jerk for infill" -msgstr "Jerk per riempimento" +msgid "Jerk of outer walls." +msgstr "Scatto pareti esterne." -msgid "Jerk for initial layer" -msgstr "Jerk per lo strato iniziale" +msgid "Jerk of inner walls." +msgstr "Scatto pareti interne." -msgid "Jerk for travel" -msgstr "Jerk per spostamento" +msgid "Jerk for top surface." +msgstr "Scatto per superficie superiore." + +msgid "Jerk for infill." +msgstr "Scatto per riempimento." + +msgid "Jerk for initial layer." +msgstr "Scatto per strato iniziale." + +msgid "Jerk for travel." +msgstr "Scatto per spostamento." msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Larghezza della linea del livello iniziale. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Larghezza della linea del primo strato. Se espresso come una %, verrà " +"calcolato sul diametro dell'ugello." msgid "Initial layer height" -msgstr "Altezza primo layer" +msgstr "Altezza primo strato" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" -"Questa è l'altezza layer iniziale. L'aumento dell'altezza del primo layer " -"può migliorare l'adesione al piatto di stampa" +"Altezza del primo strato. L'aumento dell'altezza del primo strato può " +"migliorare l'adesione al piano di stampa." -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "" -"Indica la velocità per il primo layer, tranne che per le sezioni di " +"Indica la velocità per il primo strato, tranne che per le sezioni di " "riempimento solido." msgid "Initial layer infill" -msgstr "Riempimento primo layer" +msgstr "Riempimento primo strato" -msgid "Speed of solid infill part of initial layer" -msgstr "Indica la velocità per le parti di riempimento solido del primo layer." +msgid "Speed of solid infill part of initial layer." +msgstr "" +"Indica la velocità per le parti di riempimento solido del primo strato." msgid "Initial layer travel speed" -msgstr "Velocità di spostamento del primo strato" +msgstr "Velocità spostamento primo strato" -msgid "Travel speed of initial layer" -msgstr "Velocità di traslazione dello strato iniziale" +msgid "Travel speed of initial layer." +msgstr "Velocità di spostamento del primo strato." msgid "Number of slow layers" -msgstr "Numero di livelli lenti" +msgstr "Numero di strati lenti" msgid "" "The first few layers are printed slower than normal. The speed is gradually " @@ -11461,14 +13943,14 @@ msgstr "" "specificato." msgid "Initial layer nozzle temperature" -msgstr "Temperatura nozzle primo layer" +msgstr "Temperatura ugello primo strato" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" -"Temperatura del nozzle per la stampa del primo layer con questo filamento" +"Temperatura dell'ugello per la stampa del primo strato con questo filamento." msgid "Full fan speed at layer" -msgstr "Massima velocità della ventola al layer" +msgstr "Velocità massima della ventola su strato" msgid "" "Fan speed will be ramped up linearly from zero at layer " @@ -11477,37 +13959,71 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"La velocità della ventola aumenterà linearmente da zero al livello " -"\"close_fan_the_first_x_layers\" al massimo al livello \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" verrà ignorato se inferiore a " -"\"close_fan_the_first_x_layers\", nel qual caso la ventola funzionerà alla " -"massima velocità consentita al livello \"close_fan_the_first_x_layers\" + 1." +"La velocità della ventola aumenterà in modo lineare da zero nello strato " +"\"close_fan_the_first_x_layers\" al massimo nello strato " +"\"full_fan_speed_layer\". Se inferiore a \"close_fan_the_first_x_layers\", " +"\"full_fan_speed_layer\" verrà ignorato. in tal caso la ventola funzionerà " +"alla massima velocità consentita nello strato \"close_fan_the_first_x_layers" +"\" + 1." msgid "layer" -msgstr "" +msgstr "strato" msgid "Support interface fan speed" -msgstr "Supporta la velocità della ventola dell'interfaccia" +msgstr "Velocità ventola interfaccia di supporto" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"Velocità della ventola di raffreddamento utilizzata quando si stampano le " +"interfacce di supporto. Impostare questo parametro su una velocità superiore " +"a quella normale riduce la forza di legame dello strato tra i supporti e la " +"parte supportata, rendendoli più facili da separare.\n" +"Impostalo su -1 per disattivarlo.\n" +"Questa impostazione è sovrascritta da disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Velocità ventola ponti interni" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Velocità della ventola di raffreddamento utilizzata per tutti i ponti " +"interni. Impostalo su -1 per utilizzare invece le impostazioni di velocità " +"della ventola per le sporgenze.\n" +"\n" +"La riduzione della velocità della ventola durante la stampa dei ponti " +"interni, può aiutare ridurre la deformazione di alcune parti dovuta al " +"raffreddamento eccessivo applicato su una superficie ampia per un periodo di " +"tempo prolungato." + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"Questa velocità della ventola viene applicata durante tutte le interfacce di " -"supporto, per essere in grado di indebolire il loro legame con un'elevata " -"velocità della ventola.\n" -"Impostare su -1 per disabilitare questa sostituzione.\n" -"Può essere sovrascritto solo da disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"Questa impostazione fa vibrare casualmente la testa di stampa durante la " -"stampa su pareti, in modo che la superficie abbia un aspetto ruvido. Questa " -"impostazione controlla la posizione fuzzy Skin." +"Fa vibrare casualmente la testina durante la stampa di pareti, in modo che " +"la superficie abbia un aspetto ruvido. Con questa impostazione è possibile " +"controllare le zone in cui si vuole avere una superficie ruvida e irregolare." msgid "Contour" msgstr "Contorno" @@ -11519,99 +14035,220 @@ msgid "All walls" msgstr "Tutte le pareti" msgid "Fuzzy skin thickness" -msgstr "Spessore superficie crespa" +msgstr "Spessore superficie ruvida" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"Ampiezza del tremolio: si consiglia di mantenerla inferiore alla larghezza " -"della linea della parete esterna." +"Ampiezza e la profondità delle oscillazioni dell’ugello. Si consiglia di " +"mantenerla inferiore alla larghezza della linee delle pareti esterne." msgid "Fuzzy skin point distance" -msgstr "Distanza punti superficie crespa" +msgstr "Distanza punti superficie ruvida" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" -"La distanza media tra i punti casuali introdotti su ogni segmento di linea" +"Distanza media tra i punti casuali introdotti su ogni segmento di linea." msgid "Apply fuzzy skin to first layer" -msgstr "Applicare la pelle sfocata sul primo strato" +msgstr "Applica la superficie ruvida sul primo strato" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Se applicare la Superficie Crespa ( fuzzy skin) sul primo strato" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Se applicare la superficie ruvida sul primo strato." + +msgid "Fuzzy skin generator mode" +msgstr "Modalità generatore superficie ruvida" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Combinata" + +msgid "Fuzzy skin noise type" +msgstr "Tipo di rumore superficie ruvida" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Tipo di rumore da utilizzare per la generazione della superficie ruvida.\n" +"Classico: rumore casuale uniforme classico.\n" +"Perlin: rumore Perlin, che conferisce una trama più uniforme.\n" +"Ondulato: Simile al rumore Perlin, ma più granuloso.\n" +"Multifrattale increspato: rumore increspato con superfici nette e " +"frastagliate. Crea trame simili al marmo.\n" +"Voronoi: divide la superficie in tassellazioni di Voronoi e ne sposta " +"ciascuna di una quantità casuale. Crea una trama a mosaico." + +msgid "Classic" +msgstr "Classico" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Ondulato" + +msgid "Ridged Multifractal" +msgstr "Multifrattale increspato" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Dimensione struttura superficie ruvida" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Dimensione di base delle strutture di rumore che generano la superficie " +"ruvida, in mm. Valori più alti daranno luogo a strutture più grandi." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Ottave rumore superficie ruvida" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Il numero di ottave di rumore da utilizzare. Valori più alti aumentano il " +"dettaglio del rumore, ma aumentano anche il tempo di calcolo." + +msgid "Fuzzy skin noise persistence" +msgstr "Persistenza rumore superficie ruvida" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Tasso di decadimento per le ottave più alte del rumore. Valori più bassi " +"daranno luogo a un rumore più uniforme." msgid "Filter out tiny gaps" -msgstr "Filtra i piccoli spazi vuoti" +msgstr "Filtra piccoli spazi vuoti" msgid "Layers and Perimeters" -msgstr "Layer e Perimetri" +msgstr "Strati e Perimetri" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtra gli spazi più piccoli della soglia specificata" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Non stampa il riempimento sugli spazi vuoti con una lunghezza inferiore alla " +"soglia specificata (in mm). Questa impostazione si applica al riempimento " +"superiore, inferiore e solido e, se si utilizza il generatore di perimetri " +"classico, al riempimento degli spazi vuoti delle pareti." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" -"Indica la velocità per il riempimento del gap. I gap hanno solitamente una " -"larghezza linea irregolare e devono essere stampate più lentamente." +"Indica la velocità per il riempimento degli spazi vuoti. Gli spazi vuoti " +"hanno solitamente linee di larghezza irregolare e devono essere stampate più " +"lentamente." msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "Altezza Z precisa" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." +"Abilita questa opzione per ottenere l'altezza Z precisa dell'oggetto dopo " +"l'elaborazione del piatto. Questa sarà ottenuta regolando con precisione le " +"altezze degli ultimi strati. Nota che questo è un parametro sperimentale." msgid "Arc fitting" -msgstr "Arc fitting" +msgstr "Adattamento ad arco" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" +"Abilita questa opzione per ottenere un file G-code con movimenti G2 e G3. " +"l'opzione 'Risoluzione' regola la tolleranza di adattamento.\n" +"\n" +"Nota: per le macchine con firmware Klipper, si consiglia di disabilitare " +"questa opzione. Klipper non trae vantaggio dai comandi 'arco', poiché questi " +"vengono nuovamente suddivisi in segmenti di linea dal firmware. Ciò comporta " +"una riduzione della qualità della superficie poiché i segmenti di linea " +"vengono convertiti in archi durante l'elaborazione del piatto e poi di nuovo " +"in segmenti di linea dal firmware." msgid "Add line number" msgstr "Aggiungi numero di riga" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Abilita questa opzione per aggiungere il numero di riga (Nx) all'inizio di " -"ogni riga del G-code" +"ogni riga del G-code." msgid "Scan first layer" -msgstr "Scansiona Primo layer" +msgstr "Scansiona primo strato" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" -"Attivare questa opzione per consentire alla fotocamera della stampante di " -"verificare la qualità del primo layer." +"Abilita questa opzione per consentire alla telecamera della stampante di " +"verificare la qualità del primo strato." msgid "Nozzle type" -msgstr "Tipo di nozzle" +msgstr "Tipo di ugello" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" -"Il materiale metallico del nozzle: determina la resistenza all'abrasione del " -"nozzle e il tipo di filamento che può essere stampato." +"Materiale metallico dell'ugello. Determina la resistenza all'abrasione " +"dell'ugello e il tipo di filamento che può essere stampato." msgid "Undefine" msgstr "Indefinito" @@ -11622,18 +14259,21 @@ msgstr "Acciaio temprato" msgid "Stainless steel" msgstr "Acciaio inox" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Ottone" msgid "Nozzle HRC" -msgstr "Nozzle HRC" +msgstr "HRC ugello" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " "slicing." msgstr "" -"Durezza nozzle. Zero significa che non è necessario controllarla durante lo " -"slicing." +"Durezza ugello. Un valore pari a 0 indica che non è necessario controllarla " +"durante l'elaborazione." msgid "HRC" msgstr "HRC" @@ -11641,8 +14281,8 @@ msgstr "HRC" msgid "Printer structure" msgstr "Struttura della stampante" -msgid "The physical arrangement and components of a printing device" -msgstr "La disposizione fisica e i componenti di un dispositivo di stampa" +msgid "The physical arrangement and components of a printing device." +msgstr "Disposizione fisica e i componenti di un dispositivo di stampa." msgid "CoreXY" msgstr "CoreXY" @@ -11661,36 +14301,37 @@ msgstr "Migliore posizione dell'oggetto" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "" -"Migliore posizione di disposizione automatica nell'intervallo [0,1] w.r.t. " -"forma del letto." +"Miglior posizionamento automatico degli oggetti nell'intervallo [0,1] " +"rispetto alla forma del piatto." msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" -"Abilitare questa opzione se la macchina è dotata di ventola di " -"raffreddamento della parte ausiliaria. Comando G-code: M106 P2 S(0-255)." +"Abilita questa opzione se la macchina è dotata di ventola di raffreddamento " +"ausiliaria. Comando G-code: M106 P2 S(0-255)." msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"Avviare la ventola questo numero di secondi prima dell'ora di inizio " -"prevista (è possibile utilizzare i secondi frazionari). Si presume " -"un'accelerazione infinita per questa stima del tempo e si terrà conto solo " -"dei movimenti G1 e G0 (l'adattamento dell'arco non è supportato).\n" -"Non sposterà i comandi dei fan dai gcode personalizzati (agiscono come una " -"sorta di \"barriera\").\n" -"Non sposterà i comandi delle ventole nel gcode di avvio se è attivato " -"l'opzione \"solo gcode di avvio personalizzato\".\n" -"Utilizzare 0 per disattivare." +"Avvia la ventola con questo numero di secondi di anticipo rispetto " +"all'orario di avvio previsto (è possibile utilizzare frazioni di secondo). " +"Per questa stima temporale si presuppone un'accelerazione infinita, e si " +"terranno in considerazione solo i movimenti G1 e G0 (l'adattamento ad arco " +"non è supportato).\n" +"Non sposterà i comandi della ventola dai G-code personalizzati (agiscono " +"come una sorta di 'barriera').\n" +"Non sposterà i comandi della ventola nel G-code di avvio se è attivata " +"l'opzione 'solo G-code di avvio personalizzato'.\n" +"Impostare su 0 per disattivare." msgid "Only overhangs" msgstr "Solo sporgenze" @@ -11708,85 +14349,88 @@ msgid "" "fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" -"Emettere un comando di velocità massima della ventola per questo numero di " -"secondi prima di ridurre la velocità target per avviare la ventola di " -"raffreddamento.\n" -"Ciò è utile per le ventole in cui un PWM/potenza bassa potrebbe essere " -"insufficiente per far partire la ventola da fermo o per far sì che la " -"ventola raggiunga la velocità più velocemente.\n" +"Per avviare la ventola di raffreddamento, verrà inviato un comando di " +"velocità massima alla ventola per questo numero di secondi prima di " +"rallentarla alla velocità obiettivo.\n" +"Questa funzione è utile per le ventole in cui un basso valore PWM/potenza " +"potrebbe non essere sufficiente per far ripartire la ventola da ferma, o per " +"fargli raggiungere la velocità necessaria più rapidamente.\n" "Impostare su 0 per disattivare." msgid "Time cost" msgstr "Costo orario" -msgid "The printer cost per hour" -msgstr "Il costo orario della stampante" +msgid "The printer cost per hour." +msgstr "Costo orario della stampante." msgid "money/h" msgstr "soldi/h" msgid "Support control chamber temperature" -msgstr "Supporta la temperatura della camera di controllo" +msgstr "Supporto controllo temperatura camera di stampa" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" "Questa opzione è abilitata se la macchina supporta il controllo della " -"temperatura della camera\n" +"temperatura della camera di stampa\n" "Comando G-code: M141 S(0-255)" msgid "Support air filtration" -msgstr "Supporta la filtrazione dell'aria" +msgstr "Supporto filtrazione aria" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" -"Abilitare questa opzione se la stampante supporta il filtraggio dell'aria\n" +"Abilita questa opzione se la stampante supporta il filtrazione dell'aria\n" "Comando G-code: M106 P3 S(0-255)" msgid "G-code flavor" msgstr "Formato G-code" -msgid "What kind of gcode the printer is compatible with" -msgstr "Con che tipo di G-code è compatibile la stampante." +msgid "What kind of G-code the printer is compatible with." +msgstr "Con quale tipo di G-code la stampante è compatibile." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "Stampante modificata per granuli" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" +"Abilita questa opzione se la tua stampante utilizza materiale a granuli " +"invece di filamenti." msgid "Support multi bed types" -msgstr "Supporta i tipi di letti multipli" +msgstr "Supporto tipi di piatti multipli" -msgid "Enable this option if you want to use multiple bed types" -msgstr "Abilitare questa opzione se si desidera utilizzare più tipi di letto" +msgid "Enable this option if you want to use multiple bed types." +msgstr "Abilita questa opzione se si desidera utilizzare più tipi di piatto." msgid "Label objects" msgstr "Etichetta oggetti" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Attivalo per aggiungere commenti nel G-Code etichettando i movimenti di " -"stampa secondo l'appartenenza, utile per il plugin Octoprint CancelObject. " -"Questa impostazione NON è compatibile con una configurazione Multi Material " -"ad estrusore singolo e con Pulitura nell'oggetto / Pulitura nel riempimento." +"Abilita questa opzione per aggiungere commenti nel G-Code, contrassegnando i " +"movimenti di stampa con l'oggetto a cui appartengono, il che è utile per il " +"modulo CancelObject di Octoprint. Questa impostazione NON è compatibile con " +"una configurazione multimateriale ad estrusore singolo e con Spurgo " +"nell'oggetto / Spurgo nel riempimento." msgid "Exclude objects" msgstr "Escludi oggetti" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" -"Abilita questa opzione per aggiungere il comando EXCLUDE OBJECT nel g-code" +"Abilita questa opzione per aggiungere il comando EXCLUDE OBJECT nel G-code." msgid "Verbose G-code" msgstr "G-code verboso" @@ -11796,9 +14440,9 @@ msgid "" "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" -"Abilita per ottenere un file G-code commentato, con un testo descrittivo per " -"ciascuna linea. Se stampi da memoria SD, il peso aggiuntivo del file " -"potrebbe rallentare il firmware." +"Abilita questa opzione per ottenere un file G-code con commenti, cioè con un " +"testo descrittivo per ciascuna riga. Se si stampa dalla scheda SD, il peso " +"aggiuntivo del file potrebbe rallentare il firmware." msgid "Infill combination" msgstr "Combinazione riempimento" @@ -11807,18 +14451,154 @@ msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"Automatically combine sparse infill of several layers to print together in " -"order to reduce time. Walls are still printed with original layer height." +"Combina automaticamente il riempimento sparso di più strati per per ridurre " +"i tempi di stampa. La parete viene comunque stampata secondo l'altezza " +"originale dello strato." + +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Rotazione del riempimento solido" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "Densità del riempimento scheletrico" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Combinazione riempimento - Altezza massima strato" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Altezza massima dello strato per il riempimento sparso combinato.\n" +"\n" +"Impostalo su 0 o 100% per utilizzare il diametro dell'ugello (per la massima " +"riduzione del tempo di stampa) o su un valore di circa l'80% per " +"massimizzare la resistenza del riempimento sparso.\n" +"\n" +"Il numero di strati su cui viene combinato il riempimento si ottiene " +"dividendo questo valore per l'altezza dello strato e arrotondandolo per " +"difetto al numero decimale più vicino.\n" +"\n" +"Utilizza valori assoluti in mm (ad esempio 0,32 mm per un ugello da 0,4 mm) " +"o valori percentuali (ad esempio 80%). Questo valore non deve essere " +"maggiore del diametro dell'ugello." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" msgid "Filament to print internal sparse infill." -msgstr "Questo è il filamento per la stampa del riempimento interno." +msgstr "Filamento per la stampa del riempimento sparso interno." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Larghezza della linea del riempimento interno sparso. Se espresso come %, " -"verrà calcolato sul diametro del nozzle." +"Larghezza della linea del riempimento sparso interno. Se espresso come una " +"%, verrà calcolato sul diametro dell'ugello." msgid "Infill/Wall overlap" msgstr "Sovrapposizione riempimento/parete" @@ -11830,21 +14610,38 @@ msgid "" "value to ~10-15% to minimize potential over extrusion and accumulation of " "material resulting in rough top surfaces." msgstr "" +"L'area di riempimento viene leggermente allargata per sovrapporsi alla " +"parete e garantire una migliore adesione. Il valore percentuale è relativo " +"alla larghezza della linea del riempimento sparso. Imposta questo valore a " +"circa il 10-15% per ridurre al minimo la potenziale sovraestrusione e " +"l'accumulo di materiale, che causerebbero superfici superiori ruvide." msgid "Top/Bottom solid infill/wall overlap" -msgstr "" +msgstr "Sovrapposizione riempimento solido superiore/inferiore e parete" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" +"L'area di riempimento solido superiore/inferiore viene leggermente allargata " +"per sovrapporsi alla parete, garantendo una migliore adesione e riducendo al " +"minimo la comparsa di fori nei punti in cui il riempimento superiore/" +"inferiore incontra le pareti. Un valore del 25-30% è un buon punto di " +"partenza, riducendo al minimo la comparsa di fori. Il valore percentuale è " +"relativo alla larghezza della linea del riempimento sparso." -msgid "Speed of internal sparse infill" -msgstr "Indica la velocità del riempimento interno." +msgid "Speed of internal sparse infill." +msgstr "Velocità del riempimento sparso interno." + +msgid "Inherits profile" +msgstr "Eredita profilo" + +msgid "Name of parent profile." +msgstr "Nome del profilo padre." msgid "Interface shells" msgstr "Pareti interfaccia" @@ -11852,72 +14649,89 @@ msgstr "Pareti interfaccia" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Forza la generazione di perimetri solidi tra volumi o materiali adiacenti. " -"Utile per stampe multi estrusore con materiali traslucidi o supporti " -"solubili manuali" +"Utile per stampe multiestrusore con materiali traslucidi o supporti con " +"materiali solubili." msgid "Maximum width of a segmented region" -msgstr "Larghezza massima di una regione segmentata" +msgstr "Larghezza massima regione segmentata" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Larghezza massima di una regione segmentata. Il valore zero disattiva questa " -"caratteristica." +"Larghezza massima di una regione segmentata. Il valore zero disabilita " +"questa funzione." msgid "Interlocking depth of a segmented region" -msgstr "Profondità di incastro di una regione segmentata" +msgstr "Profondità di incastro regione segmentata" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Profondità di incastro di una regione segmentata. Zero disabilita questa " +"Profondità di incastro di una regione segmentata. Sarà ignorata se " +"\"mmu_segmented_region_max_width\" è impostato a zero o se " +"\"mmu_segmented_region_interlocking_depth\" è maggiore di " +"\"mmu_segmented_region_max_width\". Il valore zero disabilita questa " "funzione." msgid "Use beam interlocking" -msgstr "" +msgstr "Usa trave ad incastro" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Genera una struttura di travi ad incastro nei punti in cui i diversi " +"filamenti si toccano. Ciò migliora l'adesione tra i filamenti, in " +"particolare nei modelli stampati in materiali diversi." msgid "Interlocking beam width" -msgstr "" +msgstr "Larghezza trave ad incastro" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "Larghezza delle travi della struttura ad incastro." msgid "Interlocking direction" -msgstr "" +msgstr "Direzione incastro" msgid "Orientation of interlock beams." -msgstr "" +msgstr "Orientamento travi ad incastro." msgid "Interlocking beam layers" -msgstr "" +msgstr "Strati travi ad incastro" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"L'altezza delle travi della struttura ad incastro, misurata in numero di " +"strati. Meno strati sono più resistenti, ma più inclini a difetti." msgid "Interlocking depth" -msgstr "" +msgstr "Profondità incastro" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"Distanza dal confine tra i filamenti per generare una struttura ad incastro, " +"misurata in celle. Un numero troppo esiguo di celle determinerà una scarsa " +"adesione." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Evita confini con incastri" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"Distanza dall'esterno di un modello in cui non verranno generate strutture " +"ad incastro, misurata in celle." msgid "Ironing Type" msgstr "Tipo di stiratura" @@ -11927,103 +14741,119 @@ msgid "" "flat surface more smooth. This setting controls which layer being ironed" msgstr "" "La stiratura utilizza un flusso ridotto per stampare alla stessa altezza di " -"una superficie per rendere le superfici piane più lisce. Questa impostazione " -"controlla quali layer vengono stirati." +"una superficie, per rendere le superfici piane più lisce. Questa " +"impostazione controlla quali strati vengono stirati" msgid "No ironing" msgstr "Non stirare" msgid "Top surfaces" -msgstr "Tutte le superfici superiori" +msgstr "Superfici superiori" msgid "Topmost surface" msgstr "Superficie superiore più alta" msgid "All solid layer" -msgstr "Tutti i layers solidi" +msgstr "Tutti gli strati solidi" msgid "Ironing Pattern" -msgstr "Trama stiratura" +msgstr "Motivo stiratura" -msgid "The pattern that will be used when ironing" -msgstr "Il modello che verrà utilizzato durante la stiratura" +msgid "The pattern that will be used when ironing." +msgstr "Motivo che verrà utilizzata durante la stiratura." msgid "Ironing flow" msgstr "Flusso stiratura" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Indica la quantità di materiale da estrudere durante la stiratura. È " -"relativo al flusso dell'altezza normale del layer. Un valore troppo alto " -"provoca una sovraestrusione sulla superficie." +"relativo al flusso dell'altezza normale degli strati. Un valore troppo alto " +"può provocare una sovraestrusione sulla superficie." msgid "Ironing line spacing" msgstr "Spaziatura linee di stiratura" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Indica la distanza tra le linee utilizzate per la stiratura." +msgid "Ironing inset" +msgstr "Distanza stiratura dai bordi" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Distanza da mantenere dai bordi. Un valore pari a 0 imposta questo valore a " +"metà del diametro dell'ugello." + msgid "Ironing speed" msgstr "Velocità stiratura" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Indica la velocità di stampa per le linee di stiratura." -msgid "Ironing angle" -msgstr "Angolo di stiratura" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"La stiratura angolare viene eseguita a. Un numero negativo disabilita questa " -"funzione e utilizza il metodo predefinito." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "" +"Questo G-code viene inserito a ogni nuovo strato dopo il sollevamento " +"sull'asse Z." + +msgid "Clumping detection G-code" msgstr "" -"Questo G-code viene inserito a ogni cambio di layer dopo l'elevazione z." msgid "Supports silent mode" -msgstr "Modalità silenziosa" +msgstr "Supporto modalità silenziosa" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" -"Se la macchina supporta la modalità silenziosa, in cui la macchina utilizza " -"un'accelerazione inferiore per stampare in modo più silenzioso" +"Indica se la macchina supporta la modalità silenziosa, ovvero utilizza " +"un'accelerazione inferiore per stampare." msgid "Emit limits to G-code" -msgstr "Limiti di emissione al codice G" +msgstr "Emetti limiti al G-code" msgid "Machine limits" msgstr "Limiti macchina" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Se abilitato, i limiti della macchina verranno emessi nel file G-code.\n" -"Questa opzione verrà ignorata se il sapore del codice g è impostato su " +"Questa opzione verrà ignorata se il formato del G-code è impostato su " "Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" -"Questo G-code verrà utilizzato come codice pausa stampa. Gli utenti possono " -"inserire il G-code di pausa nel visualizzatore G-code." +"Questo G-code verrà utilizzato come codice per la pausa di stampa. Gli " +"utenti possono inserire il G-code di pausa nel visualizzatore G-code." -msgid "This G-code will be used as a custom code" -msgstr "Questo G-code verrà utilizzato come codice personalizzato" +msgid "This G-code will be used as a custom code." +msgstr "Questo G-code verrà utilizzato come codice personalizzato." msgid "Small area flow compensation (beta)" msgstr "Compensazione del flusso su piccola area (beta)" -msgid "Enable flow compensation for small infill areas" -msgstr "Abilita la compensazione del flusso per piccole aree di riempimento" +msgid "Enable flow compensation for small infill areas." +msgstr "Abilita la compensazione del flusso per piccole aree di riempimento." msgid "Flow Compensation Model" msgstr "Modello di compensazione del flusso" @@ -12031,13 +14861,9 @@ msgstr "Modello di compensazione del flusso" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Modello di compensazione del flusso, utilizzato per regolare il flusso per " -"piccole aree di riempimento. Il modello è espresso come una coppia di valori " -"separati da virgole per la lunghezza di estrusione e i fattori di correzione " -"del flusso, uno per riga, nel seguente formato: \"1.234,5.678\"" msgid "Maximum speed X" msgstr "Velocità massima X" @@ -12088,28 +14914,37 @@ msgid "Maximum acceleration of the E axis" msgstr "Accelerazione massima dell'asse E" msgid "Maximum jerk X" -msgstr "Jerk massimo X" +msgstr "Scatto massimo X" msgid "Maximum jerk Y" -msgstr "Jerk massimo Y" +msgstr "Scatto massimo Y" msgid "Maximum jerk Z" -msgstr "Jerk massimo Z" +msgstr "Scatto massimo Z" msgid "Maximum jerk E" -msgstr "Jerk massimo E" +msgstr "Scatto massimo E" msgid "Maximum jerk of the X axis" -msgstr "Jerk massimo dell'asse X" +msgstr "Scatto massimo dell'asse X" msgid "Maximum jerk of the Y axis" -msgstr "Jerk massimo dell'asse Y" +msgstr "Scatto massimo dell'asse Y" msgid "Maximum jerk of the Z axis" -msgstr "Jerk massimo dell'asse Z" +msgstr "Scatto massimo dell'asse Z" msgid "Maximum jerk of the E axis" -msgstr "Jerk massimo dell'asse E" +msgstr "Scatto massimo dell'asse E" + +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" msgstr "Velocità minima di estrusione" @@ -12118,10 +14953,10 @@ msgid "Minimum speed for extruding (M205 S)" msgstr "Velocità minima di estrusione (M205 S)" msgid "Minimum travel speed" -msgstr "Velocità di spostamento minima" +msgstr "Velocità minima di spostamento" msgid "Minimum travel speed (M205 T)" -msgstr "Velocità di spostamento minima (M205 T)" +msgstr "Velocità minima di spostamento (M205 T)" msgid "Maximum acceleration for extruding" msgstr "Accelerazione massima per l'estrusione" @@ -12138,30 +14973,47 @@ msgstr "Accelerazione massima per retrazione (M204 R)" msgid "Maximum acceleration for travel" msgstr "Accelerazione massima per spostamenti" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" +"Accelerazione massima per spostamenti (M204 T), si applica solo al formato " +"Marlin 2." + +msgid "Resonance avoidance" msgstr "" -"Accelerazione massima per la corsa (M204 T), si applica solo al Marlin 2" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Minimo" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"La velocità della ventola di raffreddamento può essere aumentata quando è " -"abilitato il raffreddamento automatico. Questa è la limitazione massima " -"della velocità della ventola di raffreddamento parziale" msgid "Max" msgstr "Massimo" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"La velocità della ventola di raffreddamento potrebbe aumentare quando è " +"abilitato il raffreddamento automatico. Questa è la velocità massima della " +"ventola di raffreddamento." + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"L'altezza massima del layer stampabile per l'estrusore: viene utilizzata per " -"limitare l'altezza massima del layer quando è abilitato il layer adattativo." msgid "Extrusion rate smoothing" -msgstr "Lisciatura del tasso di estrusione" +msgstr "Livellamento velocità di estrusione" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " @@ -12169,23 +15021,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12194,63 +15046,74 @@ msgstr "" "Questo parametro attenua le variazioni improvvise della velocità di " "estrusione che si verificano quando la stampante passa dalla stampa di " "un'estrusione ad alto flusso (alta velocità/larghezza maggiore) a " -"un'estrusione a flusso inferiore (velocità inferiore/larghezza inferiore) e " +"un'estrusione a basso flusso (bassa velocità/larghezza inferiore) e " "viceversa.\n" "\n" -"Definisce la velocità massima con cui la portata volumetrica estrusa in mm3/" -"sec può variare nel tempo. Valori più alti significano che sono consentite " +"Definisce la velocità massima con cui la portata volumetrica estrusa in mm³/" +"s può variare nel tempo. Valori più alti significano che sono consentite " "variazioni più elevate della velocità di estrusione, con conseguenti " "transizioni di velocità più rapide.\n" "\n" -"Il valore 0 disabilita la funzionalità. \n" +"Il valore 0 disabilita questa funzione.\n" "\n" -"Per una stampante ad azionamento diretto ad alta velocità e ad alto flusso " -"(come Bambu lab o Voron) questo valore di solito non è necessario. Tuttavia, " -"può fornire alcuni vantaggi marginali in alcuni casi in cui le velocità " -"delle funzionalità variano notevolmente. Ad esempio, quando ci sono " -"rallentamenti aggressivi dovuti a strapiombi. In questi casi si consiglia un " -"valore elevato di circa 300-350 mm3/s2 in quanto ciò consente una levigatura " -"sufficiente per aiutare l'avanzamento della pressione a ottenere una " -"transizione di flusso più fluida.\n" +"Per le stampanti con estrusore diretto ad alta velocità e ad alto flusso " +"(come Bambu lab o Voron) questo valore di solito non è necessario. Tuttavia " +"può fornire alcuni vantaggi marginali in alcuni casi in cui le velocità di " +"stampa di alcuni elementi variano notevolmente, ad esempio quando ci sono " +"rallentamenti aggressivi dovuti a sporgenze. In questi casi si consiglia un " +"valore elevato di circa 300-350 mm³/s² in quanto ciò consente un " +"livellamento sufficiente per aiutare l'anticipo di pressione a ottenere una " +"transizione di flusso più graduale.\n" "\n" -"Per le stampanti più lente senza anticipo di pressione, il valore deve " -"essere impostato su un valore molto più basso. Un valore di 10-15 mm3/s2 è " +"Per le stampanti più lente senza anticipo di pressione, l'opzione deve " +"essere impostata su un valore molto più basso. Un valore di 10-15 mm³/s² è " "un buon punto di partenza per gli estrusori a trasmissione diretta e di 5-10 " -"mm3/s2 per lo stile Bowden. \n" +"mm³/s² per quelli Bowden.\n" "\n" -"Questa funzione è nota come equalizzatore di pressione in Prusa slicer.\n" +"Questa funzione è nota come Equalizzatore di Pressione in Prusa slicer.\n" "\n" -"Nota: questo parametro disabilita l'adattamento dell'arco." - -msgid "mm³/s²" -msgstr "mm³/s²" +"Nota: questo parametro disabilita l'adattamento ad arco." msgid "Smoothing segment length" -msgstr "Levigatura della lunghezza del segmento" +msgstr "Lunghezza del segmento di livellamento" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Un valore più basso si traduce in transizioni più fluide della velocità di " -"estrusione. Tuttavia, ciò si traduce in un file gcode significativamente più " -"grande e in un maggior numero di istruzioni per l'elaborazione da parte " -"della stampante. \n" +"Un valore più basso determina transizioni più graduali della velocità di " +"estrusione. Tuttavia, ciò determina un file G-code significativamente più " +"grande e più istruzioni da elaborare per la stampante.\n" "\n" "Il valore predefinito 3 funziona bene per la maggior parte dei casi. Se la " -"stampante balbetta, aumentare questo valore per ridurre il numero di " -"regolazioni effettuate\n" +"stampante scatta, aumenta questo valore per ridurre il numero di regolazioni " +"effettuate.\n" "\n" -"Valori consentiti: 1-5" +"Valori consentiti: 0,5-5" -msgid "Minimum speed for part cooling fan" -msgstr "Velocità minima ventola di raffreddamento" +msgid "Apply only on external features" +msgstr "Applica solo su elementi esterni" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Applica il livellamento della velocità di estrusione solo sulle pareti " +"esterne e sulle sporgenze. Ciò può aiutare a ridurre gli artefatti dovuti a " +"brusche transizioni di velocità sulle sporgenze visibili esternamente, senza " +"influire sulla velocità di stampa di elementi del modello che non saranno " +"visibili all'utente." + +msgid "Minimum speed for part cooling fan." +msgstr "Velocità minima ventola di raffreddamento." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " @@ -12259,39 +15122,31 @@ msgid "" "Please enable auxiliary_fan in printer settings to use this feature. G-code " "command: M106 P2 S(0-255)" msgstr "" -"Velocità della ventola di raffreddamento della parte ausiliaria. La ventola " -"ausiliaria funzionerà a questa velocità durante la stampa, ad eccezione dei " -"primi strati, che sono definiti dall'assenza di strati di raffreddamento.\n" -"Abilitare auxiliary_fan nelle impostazioni della stampante per utilizzare " -"questa funzione. Comando G-code: M106 P2 S(0-255)" - -msgid "Min" -msgstr "Minimo" +"Velocità della ventola di raffreddamento ausiliaria. La ventola ausiliaria " +"funzionerà a questa velocità durante la stampa, ad eccezione dei primi " +"strati definiti nell'opzione 'Nessun raffreddamento per primi strati'.\n" +"Si prega di abilitare auxiliary_fan nelle impostazioni della stampante per " +"utilizzare questa funzione. Comando G-code: M106 P2 S(0-255)" msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"L'altezza minima del layer stampabile per l'estrusore. Viene utilizzata per " -"limitare l'altezza minima del layer quando è abilito il layer adattativo." msgid "Min print speed" msgstr "Velocità minima di stampa" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"La velocità di stampa minima a cui la stampante rallenterà per tentare di " -"mantenere il tempo minimo dello strato sopra, quando è abilitato il " -"rallentamento per un migliore raffreddamento dello strato." +"Velocità di stampa minima che la stampante raggiunge, per mantenere la " +"durata minima stimata dello strato definito sopra, quando è abilitata " +"l'opzione 'Rallenta stampa per miglior raffreddamento degli strati'." -msgid "Nozzle diameter" -msgstr "Diametro Nozzle" - -msgid "Diameter of nozzle" -msgstr "Diametro del nozzle" +msgid "The diameter of nozzle." +msgstr "Diametro ugello" msgid "Configuration notes" msgstr "Note di configurazione" @@ -12304,7 +15159,7 @@ msgstr "" "commenti iniziali del G-code." msgid "Host Type" -msgstr "Tipo host" +msgstr "Tipo di host" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " @@ -12314,20 +15169,21 @@ msgstr "" "contenere il tipo di host." msgid "Nozzle volume" -msgstr "Volume del nozzle" +msgstr "Volume ugello" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Volume del nozzle tra taglierina ed estremità nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Volume dell'ugello tra l'area di taglio ed l'estremità dell'ugello." msgid "Cooling tube position" msgstr "Posizione tubo di raffreddamento" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" -"Distanza del centro del tubo di raffreddamento dalla punta dell'estrusore." +"Distanza tra il punto centrale del tubo di raffreddamento e la punta " +"dell'estrusore." msgid "Cooling tube length" -msgstr "Lunghezza del tubo di raffreddamento" +msgstr "Lunghezza tubo di raffreddamento" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" @@ -12335,27 +15191,27 @@ msgstr "" "di raffreddamento al suo interno." msgid "High extruder current on filament swap" -msgstr "Alta corrente estrusore al cambio filamento" +msgstr "Aumenta corrente estrusore al cambio filamento" msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Potrebbe essere utile aumentare la corrente del motore estrusore durante la " -"sequenza di cambio filamento per permettere un avanzamento rapido del " -"ramming e per superare la resistenza durante il caricamento di un filamento " -"con una punta deformata." +"Potrebbe essere utile aumentare la corrente del motore dell'estrusore " +"durante la sequenza di cambio del filamento per permettere un'operazione di " +"modellazione della punta del filamento più rapida e per superare la " +"resistenza durante il caricamento di un filamento con una punta deformata." msgid "Filament parking position" -msgstr "Posizione di parcheggio del filamento" +msgstr "Posizione parcheggio del filamento" msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Distanza della punta dell'estrusore dalla posizione dove il filamento viene " -"posto mentre viene scaricato. Dovrebbe essere uguale al valore nel firmware " +"Distanza tra la punta dell'estrusore e la posizione dove il filamento viene " +"posto quando viene scaricato. Dovrebbe corrispondere al valore nel firmware " "della stampante." msgid "Extra loading distance" @@ -12364,124 +15220,132 @@ msgstr "Distanza di caricamento aggiuntiva" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" -"Quando impostato a zero, la distanza percorsa dal filamento in posizione di " -"parcheggio durante il caricamento è esattamente uguale a quella contraria " -"durante lo scaricamento. Quando il valore è positivo, viene caricato " -"maggiormente, se il valore è negativo il movimento di caricamento è più " -"corto dello scaricamento." +"Se impostato su zero, la distanza per cui il filamento viene spostato dalla " +"posizione di parcheggio durante il caricamento è esattamente la stessa di " +"quella per cui è stato spostato indietro durante lo scaricamento. Se il " +"valore è positivo, viene caricato ulteriormente, se è negativo, lo " +"spostamento di caricamento è più breve dello scaricamento." msgid "Start end points" -msgstr "Punti iniziali e finali" +msgstr "Punti di inizio e fine" msgid "The start and end points which is from cutter area to garbage can." msgstr "" -"I punti di partenza e arrivo che si trovano dall'area del taglio allo " -"scarico." +"I punti di inizio e fine che si trovano dall'area di taglio allo scarico." msgid "Reduce infill retraction" -msgstr "Riduci la retrazione nel riempimento" +msgstr "Evita retrazione nel riempimento" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" -"Non ritrarre quando gli spostamenti si trovano interamente ad un'area di " -"riempimento. Ciò significa che il gocciolamento non verrà visto. Questo può " -"ridurre i tempi di ritrazione per i modelli complessi e far risparmiare " -"tempo di stampa, ma rende lo slicing e la generazione del G-code più lento." +"Non ritrarre quando gli spostamenti si trovano interamente in un'area di " +"riempimento. Ciò significa che il trasudo del materiale non è visibile. " +"Questo può ridurre i tempi di retrazione per i modelli complessi e far " +"risparmiare tempo di stampa, ma rende più lento l'elaborazione e la " +"generazione del G-code." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Questa opzione abbasserà la temperatura degli estrusori inattivi per evitare " +"il trasudo del materiale." msgid "Filename format" msgstr "Formato nome file" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" "Gli utenti possono decidere i nomi dei file progetto nell'esportazione." msgid "Make overhangs printable" -msgstr "Rendi stampabile la sporgenza" +msgstr "Rendi sporgenze stampabili" msgid "Modify the geometry to print overhangs without support material." msgstr "" -"Modificare la geometria per stampare sporgenze senza materiale di supporto." +"Modifica la geometria per stampare sporgenze senza materiale di supporto." msgid "Make overhangs printable - Maximum angle" -msgstr "Rendi la sporgenza stampabile angolo massimo" +msgstr "Rendi sporgenze stampabili - Angolo massimo" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"Angolo massimo delle sporgenze da consentire dopo aver reso stampabili " -"sporgenze più ripide.90° non cambierà affatto il modello e consentirà alcuna " -"sporgenza, mentre 0 sostituirà tutte le sporgenze con materiale conico." +"Angolo di sporgenza massimo consento dopo aver reso stampabili le sporgenze " +"più ripide. 90° non apporterà alcuna modifica al modello e saranno mantenute " +"tutte le sporgenze, mentre 0 sostituirà tutte le sporgenze con una forma " +"conica." msgid "Make overhangs printable - Hole area" -msgstr "Rendere stampabile l'area del foro sporgente" +msgstr "Rendi sporgenze stampabili - Area foro" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -"Area massima di un foro nella base del modello prima che venga riempito da " -"materiale conico. Un valore pari a 0 riempirà tutti i fori nella base del " +"Area massima di un foro nella base del modello prima che venga riempito con " +"una forma conica. Un valore pari a 0 riempirà tutti i fori nella base del " "modello." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" -msgstr "Rileva parete a sbalzo" +msgstr "Rileva parete sporgente" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Rileva la percentuale di sporgenza rispetto alla larghezza della linea e " -"utilizza velocità diverse per stampare. Per una sporgenza di 100%%, viene " -"utilizzata la velocità del ponte." +"Rileva la percentuale di sporgenza rispetto alla larghezza della parete e " +"utilizza un velocità di stampa differente. Per una sporgenza del 100%%, " +"viene utilizzata la velocità dei ponti." + +msgid "Filament to print walls." +msgstr "Filamento per stampa pareti" msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea della parete interna. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Larghezza della linea della parete interna. Se espresso come una %, verrà " +"calcolato sul diametro dell'ugello." -msgid "Speed of inner wall" -msgstr "Indica la velocità per le pareti interne." +msgid "Speed of inner wall." +msgstr "Velocità per pareti interne." -msgid "Number of walls of every layer" -msgstr "Questo è il numero di pareti per layer." +msgid "Number of walls of every layer." +msgstr "Numero di pareti per ogni strato." msgid "Alternate extra wall" -msgstr "Parete Aggiuntiva Alternativa" +msgstr "Parete aggiuntiva alternativa" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" -"Questa impostazione aggiunge un muro extra a ogni altro livello. In questo " -"modo il riempimento si incastra verticalmente tra le pareti, ottenendo " -"stampe più resistenti. \n" +"Questa impostazione aggiunge una parete extra ad ogni altro strato. In " +"questo modo il riempimento si incastra verticalmente tra le pareti, " +"ottenendo stampe più resistenti.\n" "\n" -"Quando questa opzione è abilitata, l'opzione Garantisci spessore verticale " -"del guscio deve essere disabilitata. \n" +"Quando questa opzione è abilitata, l'opzione 'Garantisci spessore verticale " +"del guscio' deve essere disabilitata.\n" "\n" -"L'utilizzo del riempimento fulmineo insieme a questa opzione non è " -"raccomandato in quanto il riempimento è limitato a cui ancorare i perimetri " -"extra." +"Si sconsiglia l'utilizzo del riempimento a fulmine insieme a questa opzione, " +"poiché la quantità di riempimento a cui ancorare le pareti aggiuntive è " +"limitata." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -12492,9 +15356,15 @@ msgid "" msgstr "" "Se vuoi processare il G-code in uscita con script personalizzati, basta " "elencare qui il loro percorso assoluto. Separa i diversi script con un punto " -"e virgola. Gli script passeranno il percorso assoluto nel G-code come primo " -"argomento, e potranno accedere alle impostazioni di configurazione di Orca " -"Slicer leggendo le variabili di ambiente." +"e virgola. Gli script passeranno il percorso assoluto nel G-code come primo " +"argomento, e potranno accedere alle impostazioni di configurazione di " +"Snapmaker Orca leggendo le variabili di ambiente." + +msgid "Printer type" +msgstr "Tipo stampante" + +msgid "Type of the printer." +msgstr "Tipo di stampante" msgid "Printer notes" msgstr "Note stampante" @@ -12502,150 +15372,159 @@ msgstr "Note stampante" msgid "You can put your notes regarding the printer here." msgstr "È possibile inserire qui le note riguardanti la stampante." -msgid "Raft contact Z distance" -msgstr "Distanza di contatto Z Raft" +msgid "Printer variant" +msgstr "Variante stampante" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Raft contact Z distance" +msgstr "Distanza Z di contatto zattera" + +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" -"Indica lo spazio Z tra oggetto e raft. Viene ignorato per le interfacce " -"solubili." +"Indica lo spazio Z tra oggetto e zattera. Viene ignorato per le interfacce " +"di supporto solubili." msgid "Raft expansion" -msgstr "Espansione del raft" +msgstr "Espansione della zattera" -msgid "Expand all raft layers in XY plane" -msgstr "Questo espande tutti i layer del raft nel piano XY." +msgid "Expand all raft layers in XY plane." +msgstr "Espande tutti gli strati della zattera nel piano XY." msgid "Initial layer density" -msgstr "Densità primo layer" +msgstr "Densità primo strato" -msgid "Density of the first raft or support layer" -msgstr "Questa è la densità del raft o del layer di supporto." +msgid "Density of the first raft or support layer." +msgstr "Densità del primo strato della zattera o del supporto." msgid "Initial layer expansion" -msgstr "Espansione primo layer" +msgstr "Espansione primo strato" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" -"Questo espande il primo raft o layer di supporto per migliorare l'adesione " -"al piatto." +"Espande il primo strato della zattera o del supporto per migliorare " +"l'adesione al piatto." msgid "Raft layers" -msgstr "Layer raft" +msgstr "Strati zattera" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"L'oggetto verrà sollevato da questo numero di layer di supporto. Utilizzare " -"questa funzione per evitare deformazioni durante la stampa di ABS." +"L'oggetto verrà sollevato per questo numero di strati di supporto. " +"Utilizzare questa funzione per evitare deformazioni durante la stampa di ABS." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Il percorso del G-code viene generato dopo aver semplificato il contorno del " -"modello per evitare molti punti e linee nel file G-code.\n" -"Un valore più piccolo significa una risoluzione più elevata e un tempo " -"maggiore per l'elaborazione" +"modello, per evitare troppi punti e linee nel file G-code. Un valore più " +"piccolo significa una risoluzione più elevata e un tempo maggiore per " +"l'elaborazione." msgid "Travel distance threshold" msgstr "Soglia distanza di spostamento" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "L'attivazione della retrazione avviene solo quando la distanza percorsa è " "superiore a questa soglia." msgid "Retract amount before wipe" -msgstr "Retrai la quantità prima di pulire" +msgstr "Quantità di retrazione prima di spurgo" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"Indica la lunghezza della retrazione rapida prima di una pulizia, rispetto " +"Indica la lunghezza della retrazione veloce prima di uno spurgo, rispetto " "alla lunghezza di retrazione." msgid "Retract when change layer" -msgstr "Ritrai al cambio layer" +msgstr "Ritrai al cambio di strato" -msgid "Force a retraction when changes layer" -msgstr "Questo forza una retrazione nei cambi layer." +msgid "Force a retraction when changes layer." +msgstr "Forza una retrazione quando si passa ad un nuovo strato." msgid "Retraction Length" -msgstr "Lunghezza Retrazione" +msgstr "Lunghezza retrazione" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Indica la quantità filamento nell'estrusore che viene ritirata per evitare " -"la trasudazione durante le lunghe distanze. Imposta su 0 per disattivare la " -"retrazione." -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Retrazione lunga durante il taglio (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." +"Funzionalità sperimentale: Durante i cambi di filamento, quest'ultimo viene " +"ritratto e tagliato a una distanza maggiore per ridurre al minimo lo spurgo. " +"Sebbene ciò riduca significativamente lo spurgo, potrebbe anche aumentare il " +"rischio di intasamento degli ugelli o altri problemi di stampa." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "Distanza di retrazione durante il taglio" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" +"Funzionalità sperimentale: Lunghezza di retrazione prima del taglio durante " +"il cambio del filamento." -msgid "Z hop when retract" -msgstr "Z hop in fase retrazione" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Altezza sollevamento Z" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Ogni volta che si verifica una retrazione, il nozzle viene sollevato " -"leggermente per creare spazio tra nozzle e stampa. Ciò impedisce al nozzle " -"di colpire la stampa quando si viaggia di più. L'uso di linee a spirale per " -"sollevare z può evitare che si stringano." +"Ogni volta che si verifica una retrazione, l'ugello viene sollevato " +"leggermente per creare spazio tra ugello e stampa. Ciò impedisce all'ugello " +"di colpire la stampa negli spostamenti. L'uso di linee a spirale per il " +"sollevamento sull'asse Z può evitare gli sfilacciamenti sulla stampa." -msgid "Z hop lower boundary" -msgstr "Limite inferiore dell'hop Z" +msgid "Z-hop lower boundary" +msgstr "Limite inferiore sollevamento Z" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"L'hop Z avrà effetto solo quando Z è al di sopra di questo valore e si trova " -"al di sotto del parametro: \"Limite superiore dell'hop Z\"" +"Il sollevamento Z avrà effetto solo quando Z è al di sopra di questo valore " +"e si trova al di sotto del parametro: \"Limite superiore sollevamento Z\"." -msgid "Z hop upper boundary" -msgstr "Limite superiore dell'hop Z" +msgid "Z-hop upper boundary" +msgstr "Limite superiore sollevamento Z" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Se questo valore è positivo, l'hop Z avrà effetto solo quando Z si trova al " -"di sopra del parametro: \"Z hop lower boundary\" ed è al di sotto di questo " -"valore" +"Se questo valore è positivo, il sollevamento Z avrà effetto solo quando Z si " +"trova al di sopra del parametro: \"Limite inferiore sollevamento Z\" ed è al " +"di sotto di questo valore." -msgid "Z hop type" -msgstr "Tipo Z Hop" +msgid "Z-hop type" +msgstr "Tipo sollevamento Z" + +msgid "Type of Z-hop." +msgstr "" msgid "Slope" msgstr "Inclinato" @@ -12654,15 +15533,17 @@ msgid "Spiral" msgstr "Spirale" msgid "Traveling angle" -msgstr "" +msgstr "Angolo di spostamento" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Angolo di spostamento per i tipi di sollevamento Z 'Inclinato' e 'Spirale'. " +"Impostandolo a 90°, si ottiene il sollevamento 'Normale'." msgid "Only lift Z above" -msgstr "Solleva Z solo al di sopra" +msgstr "Solleva Z solo al di sopra" msgid "" "If you set this to a positive value, Z lift will only take place above the " @@ -12672,70 +15553,80 @@ msgstr "" "verificherà solo al di sopra dello Z assoluto specificato." msgid "Only lift Z below" -msgstr "Solleva Z solo al di sotto" +msgstr "Solleva Z solo al di sotto" msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z." msgstr "" -"Se si imposta questo valore su un valore positivo, l'aumento Z si " -"verificherà solo al di sotto dello Z assoluto specificato." +"Se si imposta questo valore su un valore positivo, il sollevamento sull'asse " +"Z si verificherà solo al di sotto dello Z assoluto specificato." msgid "On surfaces" -msgstr "Tutte le superfici superiori" +msgstr "Sulle superfici" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"Applicare il comportamento Z Hop. Questa impostazione è influenzata dalle " -"impostazioni di cui sopra (solo sollevare Z sopra/sotto)." +"Forza il comportamento del sollevamento Z. Questa impostazione è influenzata " +"dalle impostazioni di cui sopra (Solleva Z solo al di sopra/sotto)." msgid "All Surfaces" -msgstr "Tutte le Superfici" +msgstr "Tutte le superfici" msgid "Top Only" -msgstr "Solo sopra" +msgstr "Solo superiore" msgid "Bottom Only" -msgstr "Solo sotto" +msgstr "Solo inferiore" msgid "Top and Bottom" -msgstr "Sopra e Sotto" +msgstr "Superiore e inferiore" + +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" msgid "Extra length on restart" -msgstr "Lunghezza extra in ripresa" +msgstr "Lunghezza aggiuntiva in ripresa" msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Quando la retrazione è compensata dopo un movimento di spostamento, " -"l'estrusore spingerà questa quantità addizionale di filamento. Questa " -"impostazione è raramente necessaria." +"Quando la retrazione è compensata dopo uno spostamento, l'estrusore espelle " +"questa quantità aggiuntiva di filamento. Questa impostazione è raramente " +"necessaria." msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" -"Quando la retrazione è compensata dopo un cambio strumento, l'estrusore " -"spingerà questa quantità addizionale di filamento." +"Quando la retrazione è compensata dopo un cambio di testina, l'estrusore " +"espelle questa quantità aggiuntiva di filamento." msgid "Retraction Speed" msgstr "Velocità di retrazione" -msgid "Speed of retractions" -msgstr "Indica la velocità di retrazione." +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" -msgstr "Velocità di deretrazione" +msgid "De-retraction Speed" +msgstr "Velocità di de-retrazione" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"La velocità di ricarica filamento nell'estrusore dopo una retrazione; " -"impostando 0, la velocità sarà la stessa della retrazione." msgid "Use firmware retraction" msgstr "Usa retrazione firmware" @@ -12745,23 +15636,25 @@ msgid "" "handle the retraction. This is only supported in recent Marlin." msgstr "" "Questa impostazione sperimentale utilizza i comandi G10 e G11 per fare in " -"modo che il firmware gestisca la ritrazione. Questo è supportato solo nel " -"recente Marlin." +"modo che il firmware gestisca la retrazione. Questo è supportato solo nella " +"versione recente di Marlin." msgid "Show auto-calibration marks" msgstr "Mostra segni di autocalibrazione" msgid "Disable set remaining print time" -msgstr "Disabilita il tempo di stampa rimanente impostato" +msgstr "Disabilita tempo di stampa rimanente impostato" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" +"Disabilita la generazione di M73: imposta il tempo di stampa rimanente nel G-" +"code finale." msgid "Seam position" -msgstr "Posizione della cucitura" +msgstr "Posizione cucitura" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Indica la posizione di partenza per ogni parte della parete esterna." msgid "Nearest" @@ -12770,6 +15663,9 @@ msgstr "Più vicino" msgid "Aligned" msgstr "Allineato" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Indietro" @@ -12777,17 +15673,17 @@ msgid "Random" msgstr "Casuale" msgid "Staggered inner seams" -msgstr "Giunzioni interne sfalsate" +msgstr "Cuciture interne sfalsate" msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" -"Questa opzione fa sì che le giunzioni interne vengano spostate all'indietro " +"Questa opzione fa sì che le cuciture interne vengano spostate all'indietro " "in base alla loro profondità, formando un motivo a zig-zag." msgid "Seam gap" -msgstr "Gap di cucitura" +msgstr "Spazio di cucitura" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -12806,22 +15702,22 @@ msgstr "Cucitura a sciarpa (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Utilizzare il giunto a sciarpa per ridurre al minimo la visibilità della " -"cucitura e aumentare la resistenza della cucitura." +"Utilizza il giunto a sciarpa per ridurre al minimo la visibilità della " +"cucitura e aumentarne la resistenza." msgid "Conditional scarf joint" -msgstr "Cucitura a Sciarpa Condizionata" +msgstr "Cucitura a sciarpa condizionale" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Applicare le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture " +"Applica le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture " "tradizionali non riescono a nascondere efficacemente quelle in " "corrispondenza degli angoli vivi." msgid "Conditional angle threshold" -msgstr "Soglia dell'angolo Condizionale" +msgstr "Soglia angolo condizionale" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12831,13 +15727,13 @@ msgid "" "The default value is 155°." msgstr "" "Questa opzione imposta la soglia dell'angolo per l'applicazione di una " -"cucitura condizionale.\n" +"cucitura a sciarpa condizionale.\n" "Se l'angolo massimo all'interno dell'anello perimetrale supera questo valore " "(che indica l'assenza di spigoli vivi), si utilizzerà una cucitura a " "sciarpa. Il valore predefinito è 155°." msgid "Conditional overhang threshold" -msgstr "" +msgstr "Soglia di sporgenza condizionale" #, no-c-format, no-boost-format msgid "" @@ -12847,41 +15743,46 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" +"Questa opzione determina la soglia di sporgenza per l'applicazione di " +"cuciture a sciarpa. Se la porzione non supportata del perimetro è inferiore " +"a questa soglia, verranno applicate cuciture a sciarpa. La soglia " +"predefinita è impostata al 40% della larghezza della parete esterna. Per " +"motivi di prestazioni, il grado di sporgenza viene stimato." msgid "Scarf joint speed" -msgstr "Velocità Cucitura a Sciarpa" +msgstr "Velocità cucitura a sciarpa" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" -"Questa opzione imposta la velocità di stampa per le cuciture a sciarpa. È " -"consigliabile stampare le cuciture a sciarpa a una velocità bassa (inferiore " -"a 100 mm/s). È anche opportuno attivare l'opzione 'Lisciatura del tasso di " -"estrusione' se la velocità impostata varia in modo significativo rispetto " -"alla velocità delle pareti esterne o interne.Se la velocità specificata qui " -"è superiore alla velocità delle pareti esterne o interne, la stampante si " -"regolerà di default sulla velocità più bassa delle due. Se specificata come " -"percentuale (ad esempio, 80%), la velocità viene calcolata in base alla " -"velocità della parete esterna o interna. Il valore predefinito è impostato " -"su 100%" +"Questa opzione imposta la velocità di stampa per le cuciture a sciarpa. È " +"consigliabile stampare le cuciture a a sciarpa a una velocità bassa " +"(inferiore a 100 mm/s). È anche opportuno attivare l'opzione 'Livellamento " +"velocità di estrusione' se la velocità impostata varia in modo significativo " +"rispetto alla velocità delle pareti esterne o interne. Se la velocità " +"specificata qui è superiore alla velocità delle pareti esterne o interne, la " +"stampante utilizzerà per impostazione predefinita la velocità più lenta " +"delle due. Se specificata come percentuale (ad esempio 80%), la velocità " +"viene calcolata in base alla velocità della parete esterna o interna. Il " +"valore predefinito è impostato su 100%." msgid "Scarf joint flow ratio" -msgstr "Rapporto di Flusso Cucitura a Sciarpa" +msgstr "Flusso di stampa cucitura a sciarpa" msgid "This factor affects the amount of material for scarf joints." msgstr "" -"Questo fattore influisce sulla quantità di materiale per le Cuciture a " -"Sciarpa" +"Questo fattore influisce sulla quantità di materiale utilizzata per le " +"cucitura a sciarpa." msgid "Scarf start height" -msgstr "Altezza di partenza della sciarpa" +msgstr "Altezza iniziale sciarpa" msgid "" "Start height of the scarf.\n" @@ -12890,14 +15791,14 @@ msgid "" msgstr "" "Altezza iniziale della sciarpa.\n" "Questa quantità può essere specificata in millimetri o come percentuale " -"dell'altezza del layer corrente. Il valore predefinito per questo parametro " -"è 0." +"dell'altezza dello strato corrente. Il valore predefinito per questo " +"parametro è 0." msgid "Scarf around entire wall" -msgstr "Sciarpa intorno a tutta la parete" +msgstr "Sciarpa attorno all'intera parete" msgid "The scarf extends to the entire length of the wall." -msgstr "La sciarpa si estende per tutta la lunghezza del muro." +msgstr "La sciarpa si estende per tutta la lunghezza della parete." msgid "Scarf length" msgstr "Lunghezza sciarpa" @@ -12922,20 +15823,21 @@ msgid "Use scarf joint for inner walls as well." msgstr "Utilizzare la cucitura a sciarpa anche per le pareti interne." msgid "Role base wipe speed" -msgstr "Wipe Speed" +msgstr "Velocità di spurgo basata su ruolo" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"La velocità di pulizia è determinata dalla velocità del ruolo di estrusione " -"corrente, ad es. Se un'azione di pulizia viene eseguita immediatamente dopo " -"un'estrusione della parete esterna, la velocità di estrusione della parete " -"esterna verrà utilizzata per l'azione di pulizia." +"La velocità di spurgo è determinata dalla velocità del ruolo di estrusione " +"corrente, ad esempio: se un'azione di spurgo viene eseguita immediatamente " +"dopo un'estrusione della parete esterna, la velocità di estrusione della " +"parete esterna verrà utilizzata per l'azione di spurgo." msgid "Wipe on loops" -msgstr "Pulisci sui loop" +msgstr "Spurgo sui perimetri di stampa" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " @@ -12943,167 +15845,254 @@ msgid "" msgstr "" "Per ridurre al minimo la visibilità della cucitura in un'estrusione ad " "anello chiuso, viene eseguito un piccolo movimento verso l'interno prima che " -"l'estrusore lasci l'anello." +"l'estrusore lasci il perimetro." msgid "Wipe before external loop" -msgstr "Pulire prima del loop esterno" +msgstr "Spurgo prima del perimetro esterno" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Per ridurre al minimo la visibilità di una potenziale sovraestrusione " -"all'inizio di un perimetro esterno quando si stampa con l'ordine di stampa " -"Esterno/Interno o Interno/Esterno/Interno/Parete interna, la deretrazione " -"viene eseguita leggermente all'interno dall'inizio del perimetro esterno. In " +"all'inizio di un perimetro esterno quando si stampa con l'ordine Esterno/" +"Interno o Interno/Esterno/Interno, la de-retrazione viene eseguita " +"leggermente verso l'interno, a partire dall'inizio del perimetro esterno. In " "questo modo qualsiasi potenziale sovraestrusione viene nascosta dalla " -"superficie esterna. \n" +"superficie esterna.\n" "\n" -"Ciò è utile quando si stampa con l'ordine di stampa Esterno/Interno o " -"Interno/Esterno/Interno parete, poiché in queste modalità è più probabile " -"che venga stampato un perimetro esterno immediatamente dopo un movimento di " -"retrazione." +"Ciò è utile quando si stampa con l'ordine Esterno/Interno o Interno/Esterno/" +"Interno, poiché in queste modalità è più probabile che venga stampato un " +"perimetro esterno immediatamente dopo un movimento di de-retrazione." msgid "Wipe speed" -msgstr "Velocità di pulizia" +msgstr "Velocità di spurgo" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"La velocità di pulizia è determinata dall'impostazione della velocità " -"specificata in questa configurazione. Se il valore è espresso in percentuale " -"(ad es. 80%), verrà calcolato in base all'impostazione della velocità di " -"traslazione di cui sopra. Il valore predefinito per questo parametro è 80%" +"La velocità di spurgo è determinata dall'impostazione della velocità " +"specificata in questa opzione. Se il valore è espresso in percentuale (ad " +"es. 80%), verrà calcolato in base all'impostazione della 'Velocità di " +"spostamento' di cui sopra. Il valore predefinito per questo parametro è 80%." msgid "Skirt distance" -msgstr "Distanza Skirt" +msgstr "Distanza gonna" -msgid "Distance from skirt to brim or object" -msgstr "Questa è la distanza dallo skirt al brim o all'oggetto." +msgid "The distance from the skirt to the brim or the object." +msgstr "Distanza dalla gonna alla tesa o all'oggetto" + +msgid "Skirt start point" +msgstr "Punto di inizio gonna" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Angolo dal centro dell'oggetto al punto di inizio della gonna. Zero è la " +"posizione più giusta. In senso antiorario è un angolo positivo." msgid "Skirt height" -msgstr "Altezza skirt" +msgstr "Altezza gonna" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Numero di layer skirt: solitamente uno" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Numero di strati della gonna. Di solito solo uno." + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" -msgstr "Scudo di protezione" +msgstr "Scudo protettivo" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" - -msgid "Limited" -msgstr "Limitato" +"Uno scudo protettivo è utile per proteggere una stampa in ABS o ASA da " +"deformazioni e distacchi dal piano di stampa dovuti a correnti d'aria. Di " +"solito è necessario solo nelle stampanti con struttura aperta, ovvero senza " +"un involucro.\n" +"\n" +"Abilitato = la gonna è alta quanto l'oggetto stampato più alto, altrimenti " +"viene utilizzato il valore di 'Altezza gonna'.\n" +"Nota: con lo scudo protettivo abilitato, la distanza tra la gonna e " +"l'oggetto è stabilita dall'opzione 'Distanza gonna'. Pertanto se le tese " +"sono attive, potrebbe intersecarsi con esse. Per evitare ciò, aumentare il " +"valore della distanza gonna.\n" msgid "Enabled" msgstr "Abilitato" -msgid "Skirt loops" -msgstr "Anelli skirt" +msgid "Skirt type" +msgstr "Tipo di gonna" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." msgstr "" -"Questo è il numero di loop per lo skirt. 0 indica che lo skirt è disattivata." +"Combinata - gonna singola per tutti gli oggetti, Per oggetto - gonna per " +"singolo oggetto." + +msgid "Per object" +msgstr "Per oggetto" + +msgid "Skirt loops" +msgstr "Perimetri gonna" + +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "" +"Numero di perimetri per la gonna. 0 indica che la gonna è disabilitata." msgid "Skirt speed" -msgstr "Velocità Skirt" +msgstr "Velocità gonna" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "" -"Velocità del gonna, in mm/s. Zero significa utilizzare la velocità di " -"estrusione dello strato predefinita." +"Velocità della gonna, in mm/s. Zero indica l'utilizzo della velocità di " +"estrusione predefinita dello strato." msgid "Skirt minimum extrusion length" -msgstr "" +msgstr "Lunghezza minima di estrusione gonna" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" +"Lunghezza minima di estrusione del filamento (in millimetri) durante la " +"stampa della gonna. 0 indica che questa funzione è disabilitata.\n" +"\n" +"L'utilizzo di un valore diverso da zero è utile se la stampante è " +"configurata per stampare senza una linea iniziale.\n" +"Il numero finale di perimetri non viene preso in considerazione durante la " +"disposizione o la convalida della distanza degli oggetti. In tal caso, " +"aumentare il numero di perimetri." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" -"La velocità di stampa nel G-code esportato verrà rallentata quando il tempo " -"stimato del layer è inferiore a questo valore per ottenere un migliore " -"raffreddamento per questi layers." +"La velocità di stampa nel G-code esportato verrà ridotta quando la durata " +"stimata di stampa dello strato è inferiore a questo valore, per ottenere un " +"migliore raffreddamento per questi strati." msgid "Minimum sparse infill threshold" -msgstr "Soglia minima riempimento" +msgstr "Soglia minima riempimento sparso" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"L'area riempimento che è inferiore al valore di soglia viene sostituita da " -"un riempimento solido interno." +"L'area del riempimento sparso che è inferiore al valore di soglia, viene " +"sostituita da un riempimento solido interno." + +msgid "Solid infill" +msgstr "Riempimento solido" + +msgid "Filament to print solid infill." +msgstr "Filamento utilizzato per stampare il riempimento solido" msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Larghezza della linea del riempimento solido interno. Se espresso come %, " -"verrà calcolato sul diametro del nozzle." +"Larghezza della linea del riempimento solido interno. Se espresso come una " +"%, verrà calcolato sul diametro dell'ugello." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Indica la velocità del riempimento solido interno, esclusa la superficie " "superiore o inferiore." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Consente la stampa a spirale, che attenua i movimenti Z del contorno esterno " -"e trasforma un modello solido in una stampa a parete singola con layers " -"inferiori solidi. Il modello finale generato non presenta alcuna giunzione." +"e trasforma un modello solido in una stampa a parete singola con strati " +"inferiori solidi. Il modello finale generato non presenta alcuna cucitura." msgid "Smooth Spiral" msgstr "Spirale liscia" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral leviga anche i movimenti X e Y, senza alcuna cucitura " -"visibile, anche nelle direzioni XY su pareti che non sono verticali" +"Spirale Liscia attenua i movimenti X e Y, con il risultato che non sarà " +"visibile alcuna cucitura, nemmeno nelle direzioni XY su pareti che non sono " +"verticali." msgid "Max XY Smoothing" -msgstr "Levigatura Max XY" +msgstr "Levigatura XY massima" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" -"Distanza massima per spostare i punti in XY per cercare di ottenere una " -"spirale uniformeSe espressa come %, verrà calcolata sul diametro del nozzle" +"Distanza massima di spostamento tra i punti in XY nel tentativo di ottenere " +"una spirale uniforme. Se espressa come una %, verrà calcolata sul diametro " +"dell'ugello." + +msgid "Spiral starting flow ratio" +msgstr "Flusso iniziale spirale" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Imposta il flusso di stampa iniziale durante la transizione dall'ultimo " +"strato inferiore alla spirale. Normalmente nella transizione alla spirale, " +"il flusso di stampa viene scalato dallo 0% al 100% durante l'estrusione del " +"primo perimetro, il che può in alcuni casi portare a una sottoestrusione " +"all'inizio della spirale." + +msgid "Spiral finishing flow ratio" +msgstr "Flusso finale spirale" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Imposta il flusso di stampa finale mentre termina la spirale. Normalmente " +"nella transizione alla spirale, il flusso di stampa viene scalato dal 100% " +"allo 0% durante l'estrusione dell'ultimo perimetro, il che può in alcuni " +"casi portare a una sottoestrusione alla fine della spirale." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13115,14 +16104,14 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"Se si seleziona la modalità \"Smooth\" o \"Tradizionale\", per ogni stampa " -"viene generato un video in timelapse. Dopo la stampa di ogni layer, viene " -"scattata una foto.Tutte queste foto verranno unite per creare un video " -"timelapse al termine della stampa. Se si seleziona \"Smooth\", la testa di " -"stampa si sposta sullo scivolo di spurgo posteriore dopo la stampa di ogni " -"layer e poi scatta una foto. Poiché il filamento può fuoriuscire dal nozzle " -"durante il processo di acquisizione della foto, la modalità \"Smooth\" ha " -"bisogno che venga utilizzata la prime tower per pulire il nozzle." +"Se si seleziona la modalità fluida o tradizionale, per ogni stampa verrà " +"generato un video in timelapse. Dopo la stampa di ogni strato, viene " +"scattata una foto. Tutte queste foto verranno unite per creare un video " +"timelapse al termine della stampa. Se si seleziona la modalità fluida, la " +"testina si sposterà sullo scivolo di spurgo posteriore dopo la stampa di " +"ogni strato e verrà poi scattata una foto. Poiché il filamento fuso potrebbe " +"fuoriuscire dall'ugello durante il processo di acquisizione della foto, la " +"modalità fluida ha bisogno di una torre di spurgo per pulire l'ugello." msgid "Traditional" msgstr "Tradizionale" @@ -13130,20 +16119,55 @@ msgstr "Tradizionale" msgid "Temperature variation" msgstr "Variazione di temperatura" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Differenza di temperatura da applicare quando un estrusore non è attivo. Il " +"valore non viene utilizzato quando 'idle_temperature' nelle impostazioni del " +"filamento è impostato su un valore diverso da zero." + +msgid "Preheat time" +msgstr "Tempo di preriscaldamento" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Per ridurre il tempo di attesa dopo il cambio di testina, Orca può " +"preriscaldare la testina successiva mentre quella corrente è ancora in uso. " +"Questa impostazione specifica il tempo in secondi per preriscaldare la " +"testina successiva. Orca inserirà un comando M104 per preriscaldare la " +"testina in anticipo." + +msgid "Preheat steps" +msgstr "Fasi preriscaldamento" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Inserisci più comandi di preriscaldamento (ad esempio M104.1). Utile solo " +"per Prusa XL. Per altre stampanti, impostalo su 1." + msgid "Start G-code" msgstr "G-code iniziale" -msgid "Start G-code when start the whole printing" -msgstr "G-code aggiunto all'avvio di una stampa" +msgid "Start G-code when starting the entire print." +msgstr "G-code aggiunto all'avvio di una stampa." -msgid "Start G-code when start the printing of this filament" -msgstr "G-code aggiunto quando la stampante utilizza questo filamento" +msgid "Start G-code when starting the printing of this filament." +msgstr "G-code aggiunto quando la stampante utilizza questo filamento." msgid "Single Extruder Multi Material" -msgstr "Estrusore singolo Multi Material" +msgstr "Estrusore singolo multimateriale" -msgid "Use single nozzle to print multi filament" -msgstr "Usa un ugello singolo per stampare più filamenti" +msgid "Use single nozzle to print multi filament." +msgstr "Usa un ugello singolo per stampare più filamenti." msgid "Manual Filament Change" msgstr "Cambio manuale del filamento" @@ -13155,34 +16179,34 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"Abilita questa opzione per omettere il codice G Cambia filamento " -"personalizzato solo all'inizio della stampa. Il comando di cambio utensile " -"(ad es. T0) verrà saltato durante l'intera stampa. Ciò è utile per la stampa " -"manuale multi-materiale, in cui utilizziamo M600/PAUSE per attivare l'azione " -"di cambio filamento manuale." +"Abilita questa opzione per omettere il G-code personalizzato di cambio del " +"filamento solo all'inizio della stampa. Il comando di cambio testina (ad es. " +"T0) verrà saltato durante l'intera stampa. Ciò è utile per la stampa manuale " +"multimateriale, in cui viene utilizzato il comando M600/PAUSE per attivare " +"l'azione di cambio filamento manuale." msgid "Purge in prime tower" -msgstr "Spurga nella Prime tower" +msgstr "Usa torre di spurgo" -msgid "Purge remaining filament into prime tower" -msgstr "Spurgare il filamento rimanente nella torre di prim'ordine" +msgid "Purge remaining filament into prime tower." +msgstr "Spurga il filamento rimanente nella torre di spurgo." msgid "Enable filament ramming" -msgstr "Abilita lo speronamento del filamento" +msgstr "" msgid "No sparse layers (beta)" -msgstr "Nessun strato sparso (beta)" +msgstr "Nessuno strato sparso (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Se attiva, la torre di pulitura non verrà stampata sui layer senza cambio " -"strumento. Sui layer con un cambio strumento, l'estrusore si sposterà verso " -"il basso per stampare la torre di pulitura. L'utente dovrà accertarsi che " -"non avvengano collisioni con la stampa." +"Se abilitata, la torre di spurgo non verrà stampata sugli strati in cui non " +"viene effettuato alcun cambio di testina. Sui strati con un cambio di " +"testina, l'estrusore si sposterà verso il basso per stampare la torre di " +"spurgo. L'utente dovrà accertarsi che non avvengano collisioni con la stampa." msgid "Prime all printing extruders" msgstr "Prepara tutti gli estrusori di stampa" @@ -13191,25 +16215,24 @@ msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Se attivata, tutti gli estrusori di stampa verranno preparati nel bordo " +"Se abilitata, tutti gli estrusori di stampa verranno preparati nel bordo " "frontale del piano di stampa all'inizio della stampa." msgid "Slice gap closing radius" -msgstr "Raggio chiusura del gap" +msgstr "Raggio di chiusura spazi vuoti" msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Le fessure più piccole di 2X del gap vengono riempite durante lo slicing " -"della mesh del triangolo.\n" -"L'operazione di chiusura della fessura può ridurre la risoluzione di stampa " -"finale.\n" -"Si consiglia di mantenere un valore ragionevolmente basso." +"Le fessure più piccole di 2 volte il raggio di chiusura degli spazi vuoti, " +"vengono riempite durante l'elaborazione della maglia triangolare. Questa " +"operazione può ridurre la risoluzione di stampa finale, pertanto si " +"consiglia di mantenere un valore ragionevolmente basso." msgid "Slicing Mode" -msgstr "Modalità slicing" +msgstr "Modalità elaborazione" msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " @@ -13228,7 +16251,7 @@ msgid "Close holes" msgstr "Chiudi fori" msgid "Z offset" -msgstr "Offset Z" +msgstr "Compensazione Z" msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -13237,9 +16260,9 @@ msgid "" "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "Questo valore sarà aggiunto (o sottratto) da tutte le coordinate Z nel G-" -"code di output. Viene utilizzato per compensare una posizione di finecorsa Z " +"code di uscita. Viene utilizzato per compensare una posizione di finecorsa Z " "errata: per esempio, se la posizione minima del finecorsa rimane in realtà " -"0.3mm lontano dal piano, imposta questo valore a -0.3 (o sistema il " +"0.3 mm lontano dal piano, imposta questo valore a -0.3 (o sistema il " "finecorsa)." msgid "Enable support" @@ -13249,44 +16272,51 @@ msgid "Enable support generation." msgstr "Abilita la generazione dei supporti." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normale(auto) e albero(auto) sono usati per generare automaticamente i " -"supporti. Se si seleziona normale(manuale) o albero(manuale), vengono " -"generati solo gli esecutori del supporto." +"Le opzioni Normale (auto) e Ad albero (auto) vengono utilizzate per generare " +"i supporti automaticamente. Selezionando invece Normale (manuale) o Ad " +"albero (manuale), verranno generati solo gli esecutori di supporto." -msgid "normal(auto)" -msgstr "normal(auto)" +msgid "Normal (auto)" +msgstr "Normale (auto)" -msgid "tree(auto)" -msgstr "albero(auto)" +msgid "Tree (auto)" +msgstr "Ad albero (auto)" -msgid "normal(manual)" -msgstr "normale(manuale)" +msgid "Normal (manual)" +msgstr "Normale (manuale)" -msgid "tree(manual)" -msgstr "albero(manuale)" +msgid "Tree (manual)" +msgstr "Ad Albero (manuale)" -msgid "Support/object xy distance" -msgstr "Distanza xy supporto/oggetto" +msgid "Support/object XY distance" +msgstr "Distanza XY supporto/oggetto" -msgid "XY separation between an object and its support" -msgstr "Separazione XY tra un oggetto e il suo supporto" +msgid "XY separation between an object and its support." +msgstr "Separazione XY tra un oggetto e il suo supporto." + +msgid "Support/object first layer gap" +msgstr "Spazio supporto/oggetto primo strato" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Separazione XY tra un oggetto e il suo supporto nel primo strato." msgid "Pattern angle" -msgstr "Angolo trama" +msgstr "Angolo motivo" msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "Usa questo per ruotare sul piano orizzontale la trama del supporto." +msgstr "" +"Usa questa impostazione per ruotare sul piano orizzontale il motivo del " +"supporto." msgid "On build plate only" -msgstr "Solo dal piatto" +msgstr "Solo sul piatto" -msgid "Don't create support on model surface, only on build plate" -msgstr "" -"Questa impostazione genera solo i supporti che poggiano sul piatto di stampa." +msgid "Don't create support on model surface, only on build plate." +msgstr "Genera supporti che poggiano solo sul piano di stampa." msgid "Support critical regions only" msgstr "Supporta solo aree critiche" @@ -13295,87 +16325,87 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Creare il supporto solo per le regioni critiche, tra cui una estremità " -"tagliente, sbalzo, ecc." +"Genera supporti solo per le aree critiche, tra cui estremità taglienti, " +"sbalzi, ecc." -msgid "Remove small overhangs" -msgstr "Rimuovere piccole sporgenze" - -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs" +msgstr "" + +msgid "Ignore small overhangs that possibly don't require support." msgstr "" -"Rimuovere le piccole sporgenze che eventualmente non necessitano di supporti." msgid "Top Z distance" msgstr "Distanza Z superiore" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" -"Determina lo spazio Z gap tra le interfacce supporto superiori e gli oggetti." +"Determina lo spazio Z tra l'interfaccia di supporto superiore e l'oggetto." msgid "Bottom Z distance" msgstr "Distanza Z inferiore" -msgid "The z gap between the bottom support interface and object" -msgstr "Lo spazio z gap tra l'interfaccia supporto inferiore e l'oggetto" +msgid "The Z gap between the bottom support interface and object." +msgstr "" +"Determina lo spazio Z tra l'interfaccia di supporto inferiore e l'oggetto." msgid "Support/raft base" -msgstr "Base supporto/raft" +msgstr "Base supporto/zattera" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Filamento per stampare basi di supporto e raft. \"Predefinito\" indica che " -"non viene utilizzato alcun filamento specifico per il supporto e viene " -"utilizzato il filamento corrente" +"Filamento per stampare basi di supporto e zattere. \"Predefinito\" indica " +"che non verrà utilizzato alcun filamento specifico per il supporto e che " +"sarà utilizzato il filamento corrente." msgid "Avoid interface filament for base" -msgstr "Evitare di usare filamento di interfaccia per la base" +msgstr "Evita filamento interfaccia per base" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Se possibile, evitare di utilizzare il filamento dell'interfaccia di " -"supporto per stampare la base dello stesso. " +"Se possibile, evita di utilizzare il filamento dell'interfaccia di supporto " +"per stampare la base del supporto." msgid "" "Line width of support. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea di supporto. Se espresso come %, verrà calcolato sul " -"diametro del nozzle." +"Larghezza della linea del supporto. Se espresso come una %, verrà calcolato " +"sul diametro dell'ugello." msgid "Interface use loop pattern" -msgstr "Loop pattern interface" +msgstr "Usa motivo ad anello per interfaccie" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Copre con anelli il layer superiore del supporto a contatto. Disattivato per " -"impostazione predefinita." +"Copre con anelli lo strato di contatto superiore dei supporti. Disabilitato " +"per impostazione predefinita." msgid "Support/raft interface" -msgstr "Interfaccia supporto/raft" +msgstr "Interfaccia supporto/zattera" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"Filamento per la stampa delle interfacce di supporto. \"Predefinito\" " -"significa che non esiste un filamento specifico per l'interfaccia di " -"supporto e che verrà utilizzato il filamento corrente." +"Filamento per la stampa delle interfacce di supporto. \"Predefinito\" indica " +"che non verrà utilizzato alcun filamento specifico per l'interfaccia di " +"supporto e che sarà utilizzato il filamento corrente." msgid "Top interface layers" -msgstr "Layer superiori di interfaccia " +msgstr "Strati interfaccia superiore" -msgid "Number of top interface layers" -msgstr "Indica il numero di layer di interfaccia superiore." +msgid "Number of top interface layers." +msgstr "Numero di strati dell'interfaccia superiore." msgid "Bottom interface layers" -msgstr "Layer inferiori di interfaccia " +msgstr "Strati interfaccia inferiore" -msgid "Number of bottom interface layers" -msgstr "Numero di livelli di interfaccia inferiori" +msgid "Number of bottom interface layers." +msgstr "Numero di strati dell'interfaccia inferiore." msgid "Same as top" msgstr "Come quello superiore" @@ -13383,60 +16413,64 @@ msgstr "Come quello superiore" msgid "Top interface spacing" msgstr "Spaziatura interfaccia superiore" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Spaziatura linee interfaccia. 0 significa interfaccia solida" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "Spaziatura interfaccia inferiore" -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "Spaziatura linee interfaccia di fondo. 0 significa interfaccia solida" +msgid "Spacing of bottom interface lines. Zero means solid interface." +msgstr "" +"Spaziatura delle linee dell'interfaccia inferiore. 0 equivale ad " +"un'interfaccia solida." -msgid "Speed of support interface" -msgstr "Indica la velocità per le interfacce di supporto." +msgid "Speed of support interface." +msgstr "Velocità per le interfacce di supporto." msgid "Base pattern" -msgstr "Trama base" +msgstr "Motivo base" -msgid "Line pattern of support" -msgstr "Questo è la trama lineare del supporto." +msgid "Line pattern of support." +msgstr "Motivo delle linee utilizzate nei supporti." msgid "Rectilinear grid" msgstr "Griglia rettilinea" msgid "Hollow" -msgstr "Svuota" +msgstr "Vuoto" msgid "Interface pattern" -msgstr "Trama interfaccia" +msgstr "Motivo interfaccia" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" -"Questo è la Trama lineare per le interfacce di supporto. Il modello " -"predefinito per le interfacce di supporto non solubili è rettilineo mentre " -"il modello predefinito per le interfacce di supporto solubili è concentrico." +"Motivo delle linee per le interfacce di supporto. Il motivo predefinito per " +"le interfacce di supporto non solubili è Rettilineo mentre quello per le " +"interfacce di supporto solubili è Concentrico." msgid "Rectilinear Interlaced" msgstr "Rettilineo Interlacciato" msgid "Base pattern spacing" -msgstr "Spazio trama base" +msgstr "Spaziatura motivo base" -msgid "Spacing between support lines" -msgstr "Questo determina la spaziatura tra le linee di supporto." +msgid "Spacing between support lines." +msgstr "Spaziatura tra le linee di supporto." msgid "Normal Support expansion" -msgstr "Espansione normale dei supporti" +msgstr "Espansione supporti normali" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" -"Espandere (+) o restringere (-) la portata orizzontale del supporto normale" +"Espande (+) o restringe (-) l'estensione orizzontale del supporto normale." -msgid "Speed of support" -msgstr "Indica la velocità del supporto." +msgid "Speed of support." +msgstr "Velocità dei supporti." msgid "" "Style and shape of the support. For normal support, projecting the supports " @@ -13447,42 +16481,45 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" -"Stile e forma del supporto. Per il supporto normale, proiettare i supporti " -"in una griglia regolare creerà supporti più stabili (impostazione " -"predefinita), mentre le torri di supporto aderenti risparmieranno materiale " +"Stile e forma del supporto. Per i supporti normali, questi vengono " +"proiettati in una griglia regolare che creerà supporti più stabili " +"(predefinito), mentre le torri di supporto aderenti risparmieranno materiale " "e ridurranno le cicatrici degli oggetti.\n" -"Per il supporto dell'albero, lo stile sottile e organico fonderà i rami in " -"modo più aggressivo e risparmierà molto materiale (organico predefinito), " -"mentre lo stile ibrido creerà una struttura simile al supporto normale sotto " -"grandi sporgenze piatte." +"Per i supporti ad albero, gli stili sottile e organico fonderanno i rami in " +"modo più aggressivo e permettendo di risparmiare molto materiale " +"(predefinito organico), mentre lo stile ibrido creerà una struttura simile " +"al supporto normale sotto grandi sporgenze piatte." + +msgid "Default (Grid/Organic)" +msgstr "Predefinito (Griglia/Organico)" msgid "Snug" -msgstr "Aderenti" - -msgid "Tree Slim" -msgstr "Albero Slim" - -msgid "Tree Strong" -msgstr "Albero Forte" - -msgid "Tree Hybrid" -msgstr "Albero ibrido" +msgstr "Aderente" msgid "Organic" msgstr "Organico" +msgid "Tree Slim" +msgstr "Albero sottile" + +msgid "Tree Strong" +msgstr "Albero spesso" + +msgid "Tree Hybrid" +msgstr "Albero ibrido" + msgid "Independent support layer height" -msgstr "Altezza layer di supporto indipendente" +msgstr "Altezza strato supporto indipendente" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Il layer di supporto utilizza l'altezza layer indipendentemente dal layer " -"dell'oggetto. Questo serve a supportare la personalizzazione di z-gap e " -"ridurre il tempo di stampa. Questa opzione non puó essere utilizzata quando " -"la Prime Tower è abilitata." +"Gli strati dei supporti utilizzano un'altezza di strato indipendente " +"rispetto agli strati dell'oggetto. Ciò consente di personalizzare lo spazio " +"Z e ridurre il tempo di stampa. Questa opzione non puó essere utilizzata " +"quando la torre di spurgo è abilitata." msgid "Threshold angle" msgstr "Angolo di soglia" @@ -13491,24 +16528,37 @@ msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." msgstr "" -"Il supporto sarà generato per le sporgenze il cui angolo di inclinazione è " -"inferiore alla soglia." +"I supporti verranno generati per le sporgenze il cui angolo di inclinazione " +"è inferiore a questa soglia." -msgid "Tree support branch angle" -msgstr "Angolo ramo supporti ad albero" +msgid "Threshold overlap" +msgstr "Soglia sovrapposizione" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Se l'angolo di soglia è zero, i supporti verranno generati per le sporgenze " +"la cui sovrapposizione è al di sotto della soglia. Quanto più piccolo è " +"questo valore, tanto più ripida sarà la sporgenza che può essere stampata " +"senza supporto." + +msgid "Tree support branch angle" +msgstr "Angolo rami supporti ad albero" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"Questa determina l'angolo massimo di sporgenza che i rami del supporto ad " -"albero possono raggiungere. Se l'angolo viene aumentato, i rami possono " -"essere stampati più orizzontalmente, permettendo loro di arrivare più " -"lontano." +"Questa impostazione determina l'angolo massimo di sporgenza che i rami del " +"supporto ad albero possono raggiungere. Se l'angolo viene aumentato, i rami " +"possono essere stampati più orizzontalmente, permettendo loro di arrivare " +"più lontano." msgid "Preferred Branch Angle" -msgstr "Angolo di diramazione preferito" +msgstr "Angolo rami preferito" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "" @@ -13516,21 +16566,22 @@ msgid "" "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle for branches to merge faster." msgstr "" -"L'angolo di inclinazione preferito delle ramificazioni, quando non devono " -"evitare il modello. Utilizzare un angolo più basso per renderli più " -"verticali e più stabili. Utilizzare un angolo più alto per far sì che le " -"ramificazioni si uniscano più velocemente." +"L'angolo di inclinazione preferito dei rami, quando non devono evitare il " +"modello. Utilizzare un'angolazione più bassa per renderli più verticali e " +"più stabili. Utilizzare un'angolazione più alta in modo che i rami si " +"uniscano più velocemente." msgid "Tree support branch distance" -msgstr "Distanza ramo supporti ad albero" +msgstr "Distanza rami supporti ad albero" msgid "" "This setting determines the distance between neighboring tree support nodes." msgstr "" -"Questa determina la distanza tra i nodi di supporto dell'albero vicini." +"Questa impostazione determina la distanza tra i nodi di supporto ad albero " +"vicini." msgid "Branch Density" -msgstr "Densità Ramificazioni" +msgstr "Densità Rami" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "" @@ -13541,54 +16592,44 @@ msgid "" "needed." msgstr "" "Regola la densità della struttura di supporto utilizzata per generare le " -"punte delle ramificazioni. Un valore più alto produce sporgenze migliori, ma " -"i supporti sono più difficili da rimuovere; si consiglia quindi di abilitare " +"punte dei rami. Un valore più altoproduce sporgenze migliori, ma i supporti " +"sono più difficili da rimuovere; si consiglia quindi di abilitare " "l'interfaccia di supporto superiore invece di impostare un valore elevato di " -"densità delle ramificazioni, se sono necessarie interfacce dense." - -msgid "Adaptive layer height" -msgstr "Altezza del livello adattivo" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"L'attivazione di questa opzione significa che l'altezza del layer di " -"supporto dell'albero, ad eccezione del primo, verrà calcolata " -"automaticamente " +"densità dei rami, se sono necessarie interfacce dense." msgid "Auto brim width" -msgstr "Larghezza automatica del bordo" +msgstr "Larghezza tesa automatica" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" -"Abilitando questa opzione, la larghezza del brim per il supporto dell'albero " -"verrà calcolata automaticamente" +"Abilitando questa opzione, la larghezza della tesa per i supporti ad albero " +"verrà calcolata automaticamente." msgid "Tree support brim width" -msgstr "Larghezza brim supporto ad albero" +msgstr "Larghezza tesa supporto ad albero" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Distanza dal ramo dell'albero alla linea di bordo più esterna" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Distanza dal ramo dell'albero alla linea più esterna della tesa." msgid "Tip Diameter" msgstr "Diametro della punta" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." -msgstr "Diametro della punta delle ramificazioni per i supporti organici." +msgstr "Diametro della punta dei rami per i supporti organici." msgid "Tree support branch diameter" -msgstr "Diametro ramo supporti ad albero" +msgstr "Diametro rami supporti ad albero" msgid "This setting determines the initial diameter of support nodes." -msgstr "Questa determina il diametro iniziale dei nodi di supporto." +msgstr "" +"Questa impostazione determina il diametro iniziale dei nodi di supporto." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" -msgstr "Angolo del diametro della diramazione" +msgstr "Angolo diametro dei rami" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "" @@ -13597,123 +16638,174 @@ msgid "" "over their length. A bit of an angle can increase stability of the organic " "support." msgstr "" -"L'angolo del diametro delle ramificazioni che diventano gradualmente più " -"spesse verso il basso. Un angolo pari a 0 fa sì che le ramificazioni abbiano " -"uno spessore uniforme per tutta la loro lunghezza. Un angolo un po' più " -"ampio può aumentare la stabilità del supporto organico." - -msgid "Branch Diameter with double walls" -msgstr "Diametro diramazioni con pareti doppie" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Le ramificazioni con un'area superiore all'area di un cerchio di questo " -"diametro verranno stampate con pareti doppie per garantire la stabilità. " -"Imposta questo valore a zero per non avere pareti doppie." +"L'angolo del diametro dei rami, che diventano gradualmente più spessi verso " +"il basso. Un angolo pari a 0 fa sì che i rami abbiano uno spessore uniforme " +"per tutta la loro lunghezza. Un angolo un po' più ampio può aumentare la " +"stabilità del supporto organico." msgid "Support wall loops" -msgstr "Loop parete supporto" +msgstr "Perimetri supporto" -msgid "This setting specify the count of walls around support" -msgstr "Questa impostazione specifica il numero di pareti intorno al supporto" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Questa impostazione specifica il numero di pareti del supporto " +"nell'intervallo [0,2]. Se impostato a 0, è automatico." msgid "Tree support with infill" msgstr "Riempimento supporti ad albero" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Questa impostazione specifica se aggiungere il riempimento all'interno di " -"grandi cavità del supporto dell'albero" +"grandi cavità del supporto dell'albero." + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "Trama stiratura supporto" + +msgid "Support Ironing flow" +msgstr "Flusso stiratura supporto" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "Spaziatura linee stiratura supporto" msgid "Activate temperature control" -msgstr "Attiva il controllo della temperatura" +msgstr "Attiva controllo della temperatura" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Abilitare questa opzione per il controllo della temperatura della camera. Un " -"comando M191 verrà aggiunto prima di \"machine_start_gcode\"\n" -"Comandi G-code: M141/M191 S(0-255)" +"Abilita questa opzione per il controllo automatico della temperatura della " +"camera. Questa opzione attiva l'emissione di un comando M191 prima di " +"\"machine_start_gcode\"\n" +" che imposta la temperatura della camera e attende che venga raggiunta. " +"Inoltre se presente, emette un comando M141 alla fine della stampa per " +"spegnere il riscaldatore della camera.\n" +"\n" +"Questa opzione richiede che il firmware supporti i comandi M191 e M141 " +"tramite macro o in modo nativo, e viene solitamente utilizzata quando non è " +"presente un sistema di riscaldamento della camera." msgid "Chamber temperature" -msgstr "Temperatura della camera di stampa" +msgstr "Temperatura della camera" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Una temperatura della camera più elevata può aiutare a sopprimere o ridurre " -"la deformazione e potenzialmente portare a una maggiore forza di adesione " -"tra gli strati per materiali ad alta temperatura come ABS, ASA, PC, PA e " -"così via. Allo stesso tempo, la filtrazione dell'aria di ABS e ASA " -"peggiorerà. Mentre per PLA, PETG, TPU, PVA e altri materiali a bassa " -"temperatura, la temperatura effettiva della camera non dovrebbe essere " -"elevata per evitare intasamenti, quindi 0 che sta per spegnimento è " -"altamente raccomandato" +"Per materiali ad alta temperatura come ABS, ASA, PC e PA, una temperatura " +"della camera più alta può aiutare a sopprimere o ridurre le deformazioni e " +"potenzialmente portare a una maggiore resistenza di legame tra i vari " +"strati. Tuttavia, allo stesso tempo, una temperatura della camera più alta " +"ridurrà l'efficienza della filtrazione dell'aria per ABS e ASA.\n" +"\n" +"Per PLA, PETG, TPU, PVA e altri materiali a bassa temperatura, questa " +"opzione dovrebbe essere disattivata (impostata su 0), poiché la temperatura " +"della camera dovrebbe essere bassa per evitare l'intasamento dell'estrusore " +"causato dall'ammorbidimento del materiale sul tubo termoregolatore.\n" +"\n" +"Se abilitato, questo parametro imposta anche una variabile G-code denominata " +"chamber_temperature, che può essere utilizzata per passare la temperatura " +"desiderata della camera nella macro di inizio stampa o in una macro di " +"preriscaldamento in questo modo: PRINT_START (altre variabili) " +"CHAMBER_TEMP=[chamber_temperature]. Questo può essere utile se la stampante " +"non supporta i comandi M141/M191 o, se non è presente un sistema di " +"riscaldamento della camera, si desidera gestire il preriscaldamento nella " +"macro di inizio stampa." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Temperatura del nozzle dopo il primo layer" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Temperatura dell'ugello per gli strati successivi a quello iniziale." msgid "Detect thin wall" msgstr "Rileva pareti sottili" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" -"Questo rileva pareti sottili che non possono contenere due righe e utilizza " -"una sola riga per la stampa. Potrebbe non essere stampato altrettanto bene " -"perché non è un circuito chiuso." +"Rileva le pareti sottili che non possono contenere due linee di larghezza, " +"utilizzandone quindi una sola per la stampa. Potrebbe non essere stampato " +"bene poiché non è un perimetro chiuso." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -"Questo G-code viene inserito al cambio filamento, compresi i comandi T per " -"attivare il cambio utensile." +"Questo G-code viene inserito al cambio di filamento, compresi i comandi T " +"per attivare il cambio della testina." -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" -"Questo gcode viene inserito quando viene modificato il ruolo di estrusione" +"Questo gcode viene inserito quando viene modificato il ruolo di estrusione." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Larghezza della linea per le superfici superiori. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Larghezza delle linee per le superfici superiori. Se espresso come una %, " +"verrà calcolato sul diametro dell'ugello." -msgid "Speed of top surface infill which is solid" -msgstr "Indica la velocità per il riempimento superficie superiore solida." +msgid "Speed of top surface infill which is solid." +msgstr "Velocità per il riempimento delle superfici solide superiori." msgid "Top shell layers" -msgstr "Layer guscio superiore" +msgstr "Strati guscio superiore" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" -"Indica il numero di layer solidi del guscio superiore, compreso il layer " -"superficiale superiore. Se lo spessore calcolato con questo valore è più " -"sottile dello spessore del guscio superiore, i layer del guscio superiore " +"Indica il numero di strati solidi del guscio superiore, compreso lo strato " +"della superficie superiore. Se lo spessore calcolato con questo valore è più " +"sottile dello spessore del guscio superiore, gli strati del guscio superiore " "verranno aumentati." msgid "Top solid layers" -msgstr "Layer solidi superiori" +msgstr "Strati solidi superiori" msgid "Top shell thickness" msgstr "Spessore guscio superiore" @@ -13722,65 +16814,90 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"Il numero di layer solidi superiori viene aumentato durante lo slicing se lo " -"spessore calcolato dai layer del guscio superiore è più sottile di questo " -"valore. In questo modo si può evitare di avere un guscio troppo sottile " -"quando l'altezza del layer è piccola. Il valore 0 indica che questa " +"Il numero di strati solidi superiori viene aumentato durante l'elaborazione " +"se lo spessore calcolato dagli strati del guscio superiore è più sottile di " +"questo valore. In questo modo si evita di avere un guscio troppo sottile " +"quando l'altezza degli strati è piccola. Il valore 0 indica che questa " "impostazione è disattivata e che lo spessore del guscio superiore è " -"determinato in modo assoluto dai layer del guscio superiore." +"determinato in modo assoluto dagli strati del guscio superiore." -msgid "Speed of travel which is faster and without extrusion" -msgstr "Indica la Velocità di spostamento più rapida e senza estrusione" - -msgid "Wipe while retracting" -msgstr "Pulisci durante la retrazione" +msgid "Top surface density" +msgstr "Densità superficie superiore" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." msgstr "" -"Questo sposta il nozzle lungo l'ultimo percorso di estrusione quando si " -"ritrae per pulire il materiale fuoriuscito dal nozzle. In questo modo è " -"possibile ridurre al minimo i blob quando si stampa una nuova parte dopo lo " + +msgid "Bottom surface density" +msgstr "Densità superficie inferiore" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Indica la velocità di spostamento più rapida e senza estrusione." + +msgid "Wipe while retracting" +msgstr "Spurga durante retrazione" + +msgid "" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." +msgstr "" +"Sposta l'ugello lungo l'ultimo percorso di estrusione durante la retrazione " +"per rimuovere il materiale fuoriuscito dall'ugello. In questo modo è " +"possibile ridurre al minimo i grumi quando si stampa una nuova parte dopo lo " "spostamento." msgid "Wipe Distance" -msgstr "Distanza pulizia" +msgstr "Distanza spurgo" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" -"Scrivi per quanto tempo l'ugello si sposterà lungo l'ultimo percorso quando " -"si ritrae. \n" +"Descrive per quanto tempo l'ugello si sposterà lungo l'ultimo percorso " +"durante la retrazione.\n" "\n" -"A seconda della durata dell'operazione di pulizia, della velocità e della " -"durata delle impostazioni di retrazione dell'estrusore/filamento, potrebbe " -"essere necessario un movimento di retrazione per ritrarre il filamento " -"rimanente. \n" +"A seconda della durata dell'operazione di spurgo, della velocità e della " +"durata della retrazione dell'estrusore/filamento, potrebbe essere necessario " +"un movimento di retrazione per ritrarre il filamento rimanente.\n" "\n" -"L'impostazione di un valore nella quantità di retrazione prima della " -"cancellazione di seguito eseguirà qualsiasi retrazione in eccesso prima " -"della cancellazione, altrimenti verrà eseguita dopo." +"Impostando un valore di quantità di retrazione prima dell'impostazione di " +"spurgo di seguito, verra eseguita qualsiasi retrazione in eccesso prima " +"dello spurgo. Altrimenti verrà eseguita dopo." msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"La torre di pulizia può essere utilizzata per pulire i residui sul nozzle e " -"stabilizzare la pressione della camera all'interno del nozzle al fine di " -"evitare difetti estetici durante la stampa." +"La torre di spurgo può essere utilizzata per pulire i residui presenti " +"sull'ugello e stabilizzare la pressione della camera all'interno " +"dell'ugello, al fine di evitare difetti estetici durante la stampa." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "Volumi di spurgo" @@ -13796,38 +16913,37 @@ msgstr "" "moltiplicato per i volumi di spurgo indicati nella tabella." msgid "Prime volume" -msgstr "Volume primario" +msgstr "Volume torre di spurgo" msgid "The volume of material to prime extruder on tower." -msgstr "Indica il volume materiale da usare per la Prime Tower." +msgstr "Volume materiale da usare per la torre di spurgo." -msgid "Width of prime tower" -msgstr "Indica la larghezza della Prime Tower." +msgid "Width of the prime tower." +msgstr "Larghezza della torre di spurgo." msgid "Wipe tower rotation angle" -msgstr "Angolo di rotazione della torre di pulitura" +msgstr "Angolo di rotazione della torre di spurgo" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Angolo di rotazione della torre di pulitura rispetto all'asse X." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Angolo di rotazione della torre di spurgo rispetto all'asse X." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" msgid "Stabilization cone apex angle" -msgstr "Angolo del cono di stabilizzazione" +msgstr "Angolo apice cono di stabilizzazione" msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Angolo all'apice del cono utilizzato per stabilizzare la torre di pulitura. " -"Un angolo maggiore significa una base più ampia." - -msgid "Wipe tower purge lines spacing" -msgstr "Spaziatura delle linee di spurgo della torre di pulitura" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Spaziatura delle linee di spurgo sulla torre di pulitura." +"Angolo all'apice del cono utilizzato per stabilizzare la torre di spurgo. Un " +"angolo maggiore significa una base più ampia." msgid "Maximum wipe tower print speed" -msgstr "" +msgstr "Velocità massima di stampa della torre di spurgo" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " @@ -13843,24 +16959,74 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" +"Velocità massima di stampa durante lo spurgo nella torre di spurgo e nella " +"stampa degli strati sparsi della torre. Durante lo spurgo, se la velocità " +"del riempimento sparso o quella calcolata in base alla velocità volumetrica " +"massima del filamento è inferiore, verrà utilizzata quella inferiore.\n" +"\n" +"Durante la stampa di strati sparsi, se la velocità delle pareti interne o " +"quella calcolata in base alla velocità volumetrica massima del filamento è " +"inferiore, verrà utilizzata quella inferiore.\n" +"\n" +"Aumentare questa velocità può compromettere la stabilità della torre e " +"aumentare la forza con cui l'ugello entra in collisione con eventuali grumi " +"che si sono formati sulla torre di spurgo.\n" +"\n" +"Prima di aumentare questo parametro oltre il valore predefinito di 90 mm/s, " +"accertati che la stampante sia in grado di gestire in modo affidabile le " +"maggiori velocità, e che il trasudo del materiale durante il cambio di " +"testina sia ben controllato.\n" +"\n" +"Per i perimetri esterni della torre di spurgo viene utilizzata la velocità " +"dei perimetri interni, indipendentemente da questa impostazione." -msgid "Wipe tower extruder" -msgstr "Estrusore torre di pulitura" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"L'estrusore da utilizzare per la stampa del perimetro della torre di " -"pulitura. Impostare su 0 per utilizzare quello attualmente disponibile " -"(sarebbe preferibile quello non solubile)." +"Estrusore da utilizzare per la stampa del perimetro della torre di spurgo. " +"Impostalo a 0 per utilizzare quello attualmente disponibile (sarebbe " +"preferibile un materiale non solubile)." msgid "Purging volumes - load/unload volumes" msgstr "Volumi di spurgo - volumi di carico/scarico" @@ -13870,9 +17036,21 @@ msgid "" "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" -"Questo vettore salva il volume necessario per cambiare da/a ogni strumento " -"usato per la torre di pulitura. Questi valori vengono usati per semplificare " -"la creazione dei volumi di spurgo completi." +"Questo vettore salva i volumi necessari per il passaggio da/a ogni filamento " +"usato per la torre di spurgo. Questi valori vengono utilizzati per " +"semplificare la creazione dei volumi di spurgo completi riportati di seguito." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13881,10 +17059,10 @@ msgid "" "outside. It will not take effect, unless the prime tower is enabled." msgstr "" "Lo spurgo dopo il cambio del filamento verrà eseguito all'interno dei " -"riempimenti degli oggetti. Ciò può ridurre la quantità di rifiuti e ridurre " -"il tempo di stampa. Se le pareti sono stampate con filamenti trasparenti, il " -"riempimento a colori misti sarà visibile. Non avrà effetto a meno che la " -"Prime Tower non sia abilitata." +"riempimenti degli oggetti. Ciò può ridurre la quantità di rifiuti e il tempo " +"di stampa. Se le pareti sono stampate con filamenti trasparenti, il " +"riempimento a colori misti sarà visibile. Non avrà effetto, a meno che la " +"torre di spurgo non sia abilitata." msgid "" "Purging after filament change will be done inside objects' support. This may " @@ -13892,37 +17070,68 @@ msgid "" "effect, unless the prime tower is enabled." msgstr "" "Lo spurgo dopo il cambio del filamento verrà eseguito all'interno del " -"supporto degli oggetti. Ciò può ridurre la quantità di rifiuti e ridurre il " -"tempo di stampa. Non avrà effetto a meno che non sia abilitata la Prime " -"Tower." +"supporto degli oggetti. Ciò può ridurre la quantità di rifiuti e il tempo di " +"stampa. Non avrà effetto, a meno che la torre di spurgo non sia abilitata." msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"Questo oggetto viene utilizzato per spurgare il nozzle dopo un cambio " -"filamento per risparmiare filamento e ridurre il tempo di stampa. I colori " -"degli oggetti saranno mescolati. Non avrà effetto se non è abilitata la " -"Prime Tower." +"Questo oggetto viene utilizzato per spurgare l'ugello dopo un cambio di " +"filamento, per risparmiare filamento e ridurre il tempo di stampa. I colori " +"degli oggetti saranno mescolati. Non avrà effetto, a meno che la torre di " +"spurgo non sia abilitata." msgid "Maximal bridging distance" -msgstr "Distanza massima bridging" +msgstr "Distanza massima di collegamento" msgid "Maximal distance between supports on sparse infill sections." msgstr "Distanza massima tra supporti in sezioni a riempimento sparso." -msgid "X-Y hole compensation" -msgstr "Compensazione foro X-Y" +msgid "Wipe tower purge lines spacing" +msgstr "Spaziatura linee torre di spurgo" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Spaziatura tra le linee della torre di spurgo." + +msgid "Extra flow for purging" +msgstr "Flusso aggiuntivo per spurgo" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." msgstr "" -"I fori negli oggetti vengono ingranditi o rimpiccioliti nel piano XY in base " -"al valore impostato. Un valore positivo ingrandisce i fori mentre un valore " -"negativo rimpicciolisce i fori. Questa funzione viene utilizzata per " +"Flusso aggiuntivo utilizzato per le linee sulla torre di spurgo. Ciò rende " +"le linee di spurgo più spesse o più sottili di quanto sarebbero normalmente. " +"La spaziatura viene regolata automaticamente." + +msgid "Idle temperature" +msgstr "Temperatura di inattività" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Temperatura dell'ugello quando l'estrusore non è attualmente utilizzato in " +"configurazioni multitestina. Viene utilizzato solo quando 'Prevenzione " +"trasudo materiale' è attivo nelle Impostazioni di stampa. Impostalo su 0 per " +"disabilitare questa opzione." + +msgid "X-Y hole compensation" +msgstr "Compensazione fori X-Y" + +msgid "" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." +msgstr "" +"I fori negli oggetti verranno ingranditi o rimpiccioliti sul piano XY in " +"base al valore impostato. I valori positivi ingrandiscono i fori mentre " +"quelli negativi li rimpiccioliscono. Questa funzione viene utilizzata per " "regolare leggermente le dimensioni quando gli oggetti presentano problemi di " "assemblaggio." @@ -13930,19 +17139,19 @@ msgid "X-Y contour compensation" msgstr "Compensazione contorni X-Y" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Il contorno degli oggetti viene ingrandito o rimpicciolito nel piano XY in " -"base al valore impostato. I valori positivi ingrandiscono i contorni e " +"base al valore impostato. I valori positivi ingrandiscono i contorni mentre " "quelli negativi li rimpiccioliscono. Questa funzione viene utilizzata per " "regolare leggermente le dimensioni quando gli oggetti presentano problemi di " "assemblaggio." msgid "Convert holes to polyholes" -msgstr "Conversione di fori in polifori" +msgstr "Converti fori in polifori" msgid "" "Search for almost-circular holes that span more than one layer and convert " @@ -13950,9 +17159,9 @@ msgid "" "compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" -"Cercare fori quasi circolari che si estendono su più di un layer e " -"convertire la geometria in polifori. Utilizzare la dimensione del nozzle e " -"il diametro (più grande) per calcolare il poliforo.\n" +"Cerca fori quasi circolari che si estendono su più di uno strato e converte " +"la geometria in polifori. Utilizza la dimensione dell'ugello e il diametro " +"(più grande) per calcolare il poliforo.\n" "Vedi http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" @@ -13962,7 +17171,7 @@ msgstr "Margine di rilevamento poliforo" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13970,13 +17179,13 @@ msgstr "" "Poiché i cilindri vengono spesso esportati come triangoli di dimensioni " "variabili, i punti potrebbero non trovarsi sulla circonferenza del cerchio. " "Questa impostazione consente di ampliare il rilevamento.\n" -"In mm o in % of il raggio." +"In mm o in % del raggio." msgid "Polyhole twist" msgstr "Torsione poliforo" msgid "Rotate the polyhole every layer." -msgstr "Ruotare il poliforo in ogni strato." +msgstr "Ruota il poliforo in ogni strato." msgid "G-code thumbnails" msgstr "Miniature G-code" @@ -13985,47 +17194,44 @@ msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Dimensioni delle immagini da memorizzare in file .gcode e .sl1 / .sl1s, nel " -"seguente formato: \"XxY, XxY, ...\"" +"Dimensioni delle immagini da memorizzare in un file .gcode e .sl1 / .sl1s, " +"nel seguente formato: \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" -msgstr "Formato miniature del G-code" +msgstr "Formato miniature G-code" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Formato delle miniature del G-code: PNG per la migliore qualità, JPG per la " -"dimensione più piccola, QOI per il firmware con poca memoria" +"dimensione più piccola, QOI per i firmware con poca memoria." msgid "Use relative E distances" msgstr "Usa distanze E relative" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "L'estrusione relativa è consigliata quando si utilizza l'opzione " "\"label_objects\". Alcuni estrusori funzionano meglio con questa opzione " -"unckecked (modalità di estrusione assoluta). La torre di pulizia è " +"disattivata (modalità di estrusione assoluta). La torre di spurgo è " "compatibile solo con la modalità relativa. È consigliato sulla maggior parte " -"delle stampanti. Il valore predefinito è selezionato" +"delle stampanti. Il valore predefinito è 'attivato'." msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" -"La classica generazione di pareti produce pareti con larghezza di estrusione " -"costante e per aree molto sottili viene utilizzato il riempimento degli " +"La generazione di pareti classica produce pareti con larghezza di estrusione " +"costante e, per aree molto sottili, viene utilizzato il riempimento degli " "spazi vuoti. Il motore Arachne produce pareti con larghezza di estrusione " "variabile." -msgid "Classic" -msgstr "Classico" - msgid "Arachne" msgstr "Arachne" @@ -14035,12 +17241,12 @@ msgstr "Lunghezza transizione parete" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Quando si passa da un numero di pareti diverso all'altro, man mano che il " -"pezzo diviene più sottile, viene assegnata una certa quantità di spazio per " -"dividere o unire i segmenti di parete. Viene espressa in percentuale " -"rispetto al diametro del nozzle." +"pezzo diventa più sottile, viene assegnata una certa quantità di spazio per " +"dividere o unire i segmenti di parete. Questo valore è espresso come " +"percentuale rispetto al diametro dell'ugello." msgid "Wall transitioning filter margin" msgstr "Margine filtro transizione parete" @@ -14052,16 +17258,16 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Evita la transizione avanti e indietro tra una parete extra e una in meno. " -"Questo margine estende l'intervallo di estrusione che segue a [Larghezza " -"minima parete - margine, 2 * Larghezza minima parete + margine]. L'aumento " -"di questo margine riduce il numero di transizioni, il che riduce il numero " -"di avvii/arresti dell'estrusione e il tempo di viaggio. Tuttavia, una grande " -"variazione della larghezza di estrusione può portare a problemi di sotto-" -"estrusione o sovra-estrusione. È espresso in percentuale rispetto al " -"diametro delnozzle" +"Evita la transizione avanti e indietro tra una parete aggiuntiva e una in " +"meno. Questo margine estende l'intervallo larghezza di estrusione che segue " +"a [Larghezza minima parete - margine, 2 * Larghezza minima parete + " +"margine]. L'aumento di questo margine riduce il numero di transizioni, il " +"che riduce il numero di avvii/arresti dell'estrusione e il tempo di " +"spostamento. Tuttavia, una grande variazione della larghezza di estrusione " +"può portare a problemi di sottoestrusione o sovraestrusione. Questo valore è " +"espresso come percentuale rispetto al diametro dell'ugello." msgid "Wall transitioning threshold angle" msgstr "Angolo soglia transizione parete" @@ -14071,66 +17277,62 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"Quando si creano transizioni tra pareti in numero pari e dispari. Una forma " -"a cuneo con un angolo superiore a questa impostazione non avrà transizioni e " -"non verranno stampate pareti al centro per riempire lo spazio rimanente. " -"Riducendo questa impostazione, si riduce il numero e la lunghezza delle " -"pareti centrali, ma si possono lasciare spazi vuoti o sovraestrusi" +"Quando creare transizioni tra numeri pari e dispari di pareti. Una forma a " +"cuneo con un angolo maggiore di questa impostazione, non presenterà " +"transizioni e non verranno stampate pareti al centro per riempire lo spazio " +"rimanente. Riducendo questa impostazione, si riduce il numero e la lunghezza " +"delle pareti centrali, ma si possono lasciare spazi vuoti o sovraestrusi." msgid "Wall distribution count" msgstr "Conteggio distribuzione parete" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" -"Il numero di pareti, contati a partire dal centro, sui quali deve essere " +"Numero di pareti, contati a partire dal centro, sui quali deve essere " "distribuita la variazione. Valori più bassi indicano che le pareti esterne " -"non cambiano in larghezza" +"non cambiano in larghezza." msgid "Minimum feature size" -msgstr "Dimensione minima caratteristica" +msgstr "Dimensione minima elementi" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Spessore minimo elementi sottili. Gli elementi del modello più sottili di " -"questo valore non verranno stampati, mentre le più spesse della dimensione " -"minima verranno ampliate fino alla larghezza minima della parete. È " -"espresso in percentuale rispetto al diametro del nozzle" msgid "Minimum wall length" -msgstr "Lunghezza minima della parete" +msgstr "Lunghezza minima parete" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" -"Regolare questo valore per evitare la stampa di pareti corte e non chiuse, " -"che potrebbero aumentare il tempo di stampa. Valori più alti rimuovono muri " -"più numerosi e più lunghi.\n" +"Regola questo valore per evitare che vengano stampate pareti corte e non " +"chiuse, le quali potrebbero aumentare il tempo di stampa. Valori più alti " +"rimuovono un numero maggiore di pareti e di maggior lunghezza.\n" "\n" -"NOTA: le superfici inferiore e superiore non saranno influenzate da questo " -"valore per evitare spazi visivi sul lato esterno del modello. Regola " -"\"Soglia di una parete\" nelle impostazioni avanzate di seguito per regolare " -"la sensibilità di ciò che è considerato una superficie superiore. 'Una " -"soglia muro' è visibile solo se questa impostazione è impostata al di sopra " -"del valore predefinito di 0,5 o se è abilitata l'opzione Superfici superiori " -"a parete singola." +"NOTA: le superfici inferiori e superiori non saranno influenzate da questo " +"valore, per evitare spazi visibili all'esterno del modello. Usa 'Soglia " +"singola parete' nelle impostazioni avanzate qui sotto, per regolare la " +"sensibilità di ciò che è considerato una superficie superiore. 'Soglia " +"singola parete' è visibile solo se questa impostazione è impostata sopra il " +"valore predefinito di 0,5 o se sono abilitate superfici superiori a parete " +"singola." msgid "First layer minimum wall width" -msgstr "Larghezza minima della parete del primo strato" +msgstr "Larghezza minima parete del primo strato" msgid "" "The minimum wall width that should be used for the first layer is " @@ -14138,8 +17340,8 @@ msgid "" "expected to enhance adhesion." msgstr "" "Si consiglia di impostare la larghezza minima della parete da utilizzare per " -"il primo strato alla stessa dimensione del nozzle. Si prevede che questo " -"aggiustamento migliorerà l'adesione." +"il primo strato alla stessa dimensione dell'ugello. Si prevede che questa " +"regolazione migliorerà l'adesione." msgid "Minimum wall width" msgstr "Larghezza minima parete" @@ -14148,29 +17350,29 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Larghezza della parete che sostituirà gli elementi sottili (in base alla " -"dimensione minima dell'elemento) del modello. Se la larghezza minima della " +"dimensione minima degli elementi) del modello. Se la larghezza minima della " "parete è più sottile dello spessore dell'elemento, la parete diventerà " -"spessa quanto l'elemento stesso. È espresso in percentuale rispetto al " -"diametro del nozzle" +"spessa quanto l'elemento stesso. Questo valore è espresso come percentuale " +"rispetto al diametro dell'ugello." msgid "Detect narrow internal solid infill" msgstr "Rileva riempimento solido interno stretto" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"Questa rileva automaticamente le aree interne strette di riempimento solido. " -"Se abilitato, la trama concentrica verrà utilizzato per l'area per " -"velocizzare la stampa. Altrimenti, la trama rettilinea verrà utilizzata per " -"impostazione predefinita." +"Questa opzione rileva automaticamente le aree interne strette di riempimento " +"solido. Se abilitato, per queste aree, verrà utilizzato il motivo " +"Concentrico per velocizzare la stampa. Altrimenti, per impostazione " +"predefinita, verrà utilizzato il motivo Rettilineo." msgid "invalid value " -msgstr "Valore non valido " +msgstr "valore non valido " msgid "Invalid value when spiral vase mode is enabled: " msgstr "Valore non valido quando la modalità vaso a spirale è abilitata: " @@ -14181,28 +17383,152 @@ msgstr "larghezza della linea troppo grande " msgid " not in range " msgstr " fuori portata " +msgid "Export 3MF" +msgstr "Esporta 3MF" + +msgid "Export project as 3MF." +msgstr "Esporta il progetto come file 3MF." + +msgid "Export slicing data" +msgstr "Esporta dati elaborati" + +msgid "Export slicing data to a folder." +msgstr "Esporta dati elaborati in una cartella." + +msgid "Load slicing data" +msgstr "Carica dati elaborati" + +msgid "Load cached slicing data from directory." +msgstr "Carica i dati di elaborazione memorizzati nella cache dalla directory." + +msgid "Export STL" +msgstr "Esporta STL" + +msgid "Export the objects as single STL." +msgstr "Esporta gli oggetti in un singolo STL." + +msgid "Export multiple STLs" +msgstr "Esporta STL multipli" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Esporta gli oggetti come STL multipli nella directory." + +msgid "Slice" +msgstr "Elabora" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "" +"Elaborazione dei piatti: 0-tutti i piatti, i-piatto i, altri-non valido" + +msgid "Show command help." +msgstr "Mostra la guida ai comandi." + +msgid "UpToDate" +msgstr "Aggiorna" + +msgid "Update the config values of 3MF to latest." +msgstr "Aggiorna i valori di configurazione dei file 3MF ai più recenti." + +msgid "downward machines check" +msgstr "verifica macchine" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"verifica se la macchina corrente è compatibile con le macchine presenti " +"nell'elenco." + +msgid "Load default filaments" +msgstr "Carica filamenti predefiniti" + +msgid "Load first filament as default for those not loaded." +msgstr "Carica il primo filamento come predefinito per quelli non caricati." + msgid "Minimum save" msgstr "Salvataggio minimo" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "Esporta 3MF con dimensione minima." +msgid "mtcpp" +msgstr "nmtpp" + +msgid "max triangle count per plate for slicing." +msgstr "numero massimo di triangoli per piatto da elaborare." + +msgid "mstpp" +msgstr "tmepp" + +msgid "max slicing time per plate in seconds." +msgstr "tempo massimo di elaborazione per piatto in secondi." + msgid "No check" msgstr "Nessun controllo" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Non eseguire alcun controllo di validità, come il controllo dei conflitti di " "percorso del G-code." +msgid "Normative check" +msgstr "Controllo normativo" + +msgid "Check the normative items." +msgstr "Controlla gli elementi normativi." + +msgid "Output Model Info" +msgstr "Informazioni modello di output" + +msgid "Output the model's information." +msgstr "Fornisce le informazioni del modello." + +msgid "Export Settings" +msgstr "Esporta impostazioni" + +msgid "Export settings to a file." +msgstr "Esporta le impostazioni in un file." + +msgid "Send progress to pipe" +msgstr "Invia l'avanzamento al pipe" + +msgid "Send progress to pipe." +msgstr "Invia l'avanzamento al pipe." + +msgid "Arrange Options" +msgstr "Opzioni disposizione" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Opzioni di disposizione: 0-disabilita, 1-abilita, altro-auto" + +msgid "Repetition count" +msgstr "Conteggio delle ripetizioni" + +msgid "Repetition count of the whole model." +msgstr "Numero di ripetizioni dell'intero modello." + msgid "Ensure on bed" msgstr "Accerta che sia sul piano" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" -"Sollevare l'oggetto sopra il letto quando è parzialmente sotto. Disabilitato " -"per impostazione predefinita" +"Solleva l'oggetto sopra il piatto quando è parzialmente sotto. Disabilitato " +"per impostazione predefinita." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Disponi i modelli su un piano e uniscili in un singolo modello al fine di " +"effettuare le operazioni una singola volta." + +msgid "Convert Unit" +msgstr "Converti unità" + +msgid "Convert the units of model." +msgstr "Converti le unità del modello." msgid "Orient Options" msgstr "Opzioni di orientamento" @@ -14213,14 +17539,89 @@ msgstr "Opzioni di orientamento: 0-disabilita, 1-abilita, altri-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Angolo di rotazione attorno all'asse Z in gradi." +msgid "Rotate around X" +msgstr "Ruota attorno ad X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Angolo di rotazione attorno all'asse X in gradi." + msgid "Rotate around Y" msgstr "Ruota attorno ad Y" msgid "Rotation angle around the Y axis in degrees." -msgstr "Angolo di rotazione sull'asse Y in gradi." +msgstr "Angolo di rotazione attorno all'asse Y in gradi." + +msgid "Scale the model by a float factor." +msgstr "Ridimensiona il modello in base a un fattore decimale." + +msgid "Load General Settings" +msgstr "Carica impostazioni generali" + +msgid "Load process/machine settings from the specified file." +msgstr "Carica le impostazioni di processo/macchina dal file specificato." + +msgid "Load Filament Settings" +msgstr "Carica impostazioni filamento" + +msgid "Load filament settings from the specified file list." +msgstr "Carica le impostazioni del filamento dall'elenco di file specificato." + +msgid "Skip Objects" +msgstr "Salta Oggetti" + +msgid "Skip some objects in this print." +msgstr "Salta alcuni oggetti in questa stampa." + +msgid "Clone Objects" +msgstr "Clona Oggetti" + +msgid "Clone objects in the load list." +msgstr "Clona gli oggetti nell'elenco di caricamento." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Carica le impostazioni di processo/macchina aggiornate dal file specificato " +"quando si utilizza Aggiorna." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Carica le impostazioni aggiornate del filamento dal file specificato quando " +"si utilizza Aggiorna." + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Se abilitato, controlla se la macchina corrente è compatibile con le " +"macchine presenti nell'elenco." + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "L'elenco delle impostazioni delle macchine deve essere controllato." + +msgid "Load assemble list" +msgstr "Carica elenco di assemblaggio" + +msgid "Load assemble object list from config file." +msgstr "" +"Carica l'elenco degli oggetti di assemblaggio dal file di configurazione." msgid "Data directory" -msgstr "Directory dati" +msgstr "Cartella dati" msgid "" "Load and store settings at the given directory. This is useful for " @@ -14228,48 +17629,151 @@ msgid "" "storage." msgstr "" "Carica e archivia le impostazione in una data cartella. Questo è utile per " -"mantenere diversi profili o aggiungere configurazioni da un archivio di rete." +"mantenere diversi profili o aggiungere configurazioni da un'unità di rete." -msgid "Load custom gcode" -msgstr "Carica gcode personalizzato" +msgid "Output directory" +msgstr "Cartella di destinazione" -msgid "Load custom gcode from json" -msgstr "Carica gcode personalizzato da json" +msgid "Output directory for the exported files." +msgstr "Questa è la cartella di destinazione per i file esportati." -msgid "Current z-hop" -msgstr "Z-hop corrente" +msgid "Debug level" +msgstr "Livello di debug" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" msgstr "" -"Contiene gli z-hop presenti all'inizio del blocco di G-code personalizzato." +"Imposta livello di debug. 0:fatale, 1:errore, 2:avviso, 3:info, 4:debug, 5:" +"traccia\n" + +msgid "Enable timelapse for print" +msgstr "Abilita timelapse per la stampa" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" +"Se abilitato, verrà utilizzato il timelapse durante l'elaborazione del " +"piatto." + +msgid "Load custom G-code" +msgstr "Carica G-code personalizzato" + +msgid "Load custom G-code from json." +msgstr "Carica G-code personalizzato da json." + +msgid "Load filament IDs" +msgstr "Carica ID dei filamenti" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "Consenti più colori sul piatto" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "Se abilitato, la funzione Disponi consentirà più colori sul piatto." + +msgid "Allow rotation when arranging" +msgstr "Consenti rotazioni quando si dispone" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Se abilitato, la funzione Disponi consentirà la rotazione quando si " +"posiziona l'oggetto." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Evita regione calibrazione estrusione quando si dispone" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Se abilitato, la funzione Disponi eviterà la regione di calibrazione " +"dell'estrusione quando si posiziona l'oggetto." + +msgid "Skip modified G-code in 3MF" +msgstr "Salta G-code modificati nel 3mf" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Salta i G-code modificati nel 3MF dai profili della stampante o del " +"filamento." + +msgid "MakerLab name" +msgstr "Nome MakerLab" + +msgid "MakerLab name to generate this 3MF." +msgstr "Nome MakerLab per generare questo 3MF." + +msgid "MakerLab version" +msgstr "Versione MakerLab" + +msgid "MakerLab version to generate this 3MF." +msgstr "Versione MakerLab per generare questo 3MF." + +msgid "Metadata name list" +msgstr "Elenco nomi metadati" + +msgid "Metadata name list added into 3MF." +msgstr "Elenco dei nomi dei metadati aggiunti nel 3MF." + +msgid "Metadata value list" +msgstr "Elenco valori metadati" + +msgid "Metadata value list added into 3MF." +msgstr "Elenco dei valori dei metadati aggiunti nel 3MF." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Consenti l'elaborazione del file 3MF con la versione più recente" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Consenti l'elaborazione del file 3MF con la versione più recente." + +msgid "Current Z-hop" +msgstr "Sollevamento Z corrente" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "" +"Contiene i sollevamenti Z presenti all'inizio del blocco di G-code " +"personalizzato." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Posizione dell'estrusore all'inizio del blocco di G-code personalizzato. Se " -"il G-code personalizzato si sposta da un'altra parte, dovrebbe scrivere in " -"questa variabile in modo che PrusaSlicer sappia da dove proviene quando " -"riprende il controllo." +"il G-code personalizzato si sposta altrove, dovrebbe scrivere in questa " +"variabile in modo che Snapmaker Orca sappia da dove proviene quando riprende il " +"controllo." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Stato di retrazione all'inizio del blocco di G-code personalizzato. Se il G-" -"code personalizzato sposta l'asse dell'estrusore, deve scrivere su questa " -"variabile in modo che PrusaSlicer effettui correttamente la deretrazione " -"quando riprende il controllo." +"code personalizzato sposta l'asse dell'estrusore, dovrebbe scrivere su " +"questa variabile in modo che Snapmaker Orca effettui correttamente la de-" +"retrazione quando riprende il controllo." -msgid "Extra deretraction" -msgstr "Deretrazione aggiuntiva" +msgid "Extra de-retraction" +msgstr "De-retrazione aggiuntiva" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" -"Attualmente è previsto un priming aggiuntivo dell'estrusore dopo la " -"deretrazione." +"Attualmente è previsto un'ulteriore spurgo dell'estrusore dopo la de-" +"retrazione." + +msgid "Absolute E position" +msgstr "Posizione E assoluta" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Posizione attuale dell'asse dell'estrusore. Utilizzato solo con " +"indirizzamento assoluto dell'estrusore." msgid "Current extruder" msgstr "Estrusore attuale" @@ -14288,10 +17792,10 @@ msgstr "" "attualmente stampato." msgid "Has wipe tower" -msgstr "Ha una torre di pulitura" +msgstr "Ha una torre di spurgo" msgid "Whether or not wipe tower is being generated in the print." -msgstr "Se la torre di pulitura viene generata o meno nella stampa." +msgstr "Indica se la torre di spurgo viene generata o meno nella stampa." msgid "Initial extruder" msgstr "Estrusore iniziale" @@ -14300,39 +17804,49 @@ msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_tool." msgstr "" -"Indice a base zero del primo estrusore utilizzato nella stampa. Come " -"initial_tool." +"Indice a base zero del primo estrusore utilizzato nella stampa. Equivalente " +"a initial_tool." msgid "Initial tool" -msgstr "Strumento iniziale" +msgstr "Testina iniziale" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_extruder." msgstr "" -"Indice a base zero del primo estrusore utilizzato nella stampa. Come " -"initial_extruder." +"Indice a base zero del primo estrusore utilizzato nella stampa. Equivalente " +"a initial_extruder." msgid "Is extruder used?" msgstr "Viene usato l'estrusore?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" -"Vettore di booleani che indica se un determinato estrusore viene utilizzato " -"nella stampa." +"Vettore di valori booleani che indicano se un determinato estrusore viene " +"utilizzato nella stampa." + +msgid "Has single extruder MM priming" +msgstr "Ha spurgo estrusore singolo MM" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"In questa stampa vengono utilizzate regioni di spurgo multimateriale " +"aggiuntive?" msgid "Volume per extruder" msgstr "Volume per estrusore" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -"Volume totale di filamento estruso per estrusore durante l'intera stampa." +"Volume totale di filamento estruso per ogni estrusore durante l'intera " +"stampa." -msgid "Total toolchanges" -msgstr "Totale cambi utensile" +msgid "Total tool changes" +msgstr "Totale cambi di testina" -msgid "Number of toolchanges during the print." -msgstr "Numero di cambi strumenti durante la stampa." +msgid "Number of tool changes during the print." +msgstr "Numero di cambi di testina durante la stampa." msgid "Total volume" msgstr "Volume totale" @@ -14347,8 +17861,8 @@ msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." msgstr "" -"Peso per estrusore estruso durante l'intera stampa. Calcolato dal valore " -"filament_density in Impostazioni filamento." +"Peso del materiale estruso da ogni estrusore durante l'intera stampa. " +"Calcolato dal valore filament_density in Impostazioni filamento." msgid "Total weight" msgstr "Peso totale" @@ -14361,10 +17875,10 @@ msgstr "" "Impostazioni filamento." msgid "Total layer count" -msgstr "Numero totale di layer" +msgstr "Numero totale di strati" msgid "Number of layers in the entire print." -msgstr "Numero di layer dell'intera stampa." +msgstr "Numero di strati dell'intera stampa." msgid "Number of objects" msgstr "Numero di oggetti" @@ -14387,12 +17901,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Contiene una stringa con le informazioni sul ridimensionamento applicato ai " "singoli oggetti. L'indicizzazione degli oggetti è a base zero (il primo " "oggetto ha indice 0).\n" -"Esempio: 'x:100% y:50% z:100'." +"Esempio: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Nome del file di input senza estensione" @@ -14401,16 +17915,16 @@ msgid "Source filename of the first object, without extension." msgstr "Nome del file sorgente del primo oggetto, senza estensione." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" -"Il vettore ha due elementi: le coordinate x e y del punto. Valori in mm." +"Il vettore ha due elementi: le coordinate X e Y del punto. Valori in mm." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" -"Il vettore ha due elementi: le dimensioni x e y della bounding box. Valori " -"in mm." +"Il vettore ha due elementi: le dimensioni X e Y del riquadro di " +"delimitazione. Valori in mm." msgid "First layer convex hull" msgstr "Inviluppo convesso del primo strato" @@ -14419,32 +17933,35 @@ msgid "" "Vector of points of the first layer convex hull. Each element has the " "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" -"Vettore di punti dell'inviluppo convesso del primo layer. Ogni elemento ha " +"Vettore di punti dell'inviluppo convesso del primo strato. Ogni elemento ha " "il seguente formato: '[x, y]' (x e y sono numeri in virgola mobile in mm)." msgid "Bottom-left corner of first layer bounding box" -msgstr "Angolo inferiore sinistro della bounding box del primo layer" +msgstr "" +"Angolo inferiore sinistro del riquadro di delimitazione del primo strato" msgid "Top-right corner of first layer bounding box" -msgstr "Angolo superiore destro della bounding box del primo layer" +msgstr "Angolo superiore destro del riquadro di delimitazione del primo strato" msgid "Size of the first layer bounding box" -msgstr "Dimensione della bounding box del primo layer" +msgstr "Dimensione del riquadro di delimitazione del primo strato" msgid "Bottom-left corner of print bed bounding box" -msgstr "Angolo in basso a sinistra della bounding box del piano di stampa" +msgstr "" +"Angolo in basso a sinistra del riquadro di delimitazione del piano di stampa" msgid "Top-right corner of print bed bounding box" -msgstr "Angolo superiore destro della bounding box del piano di stampa" +msgstr "" +"Angolo superiore destro del riquadro di delimitazione del piano di stampa" msgid "Size of the print bed bounding box" -msgstr "Dimensione della bounding box del piano di stampa" +msgstr "Dimensione del riquadro di delimitazione del piano di stampa" msgid "Timestamp" -msgstr "Timestamp" +msgstr "Marca temporale" msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "Stringa contenente l'ora corrente nel formato yyyyMMdd-hhmmss." +msgstr "Stringa contenente l'ora corrente nel formato aaaaMMgg-hhmmss." msgid "Day" msgstr "Giorno" @@ -14455,63 +17972,76 @@ msgstr "Ora" msgid "Minute" msgstr "Minuto" +msgid "Second" +msgstr "Secondo" + msgid "Print preset name" -msgstr "Nome del preset di stampa" +msgstr "Nome del profilo di stampa" msgid "Name of the print preset used for slicing." -msgstr "Nome del preset di stampa utilizzato per lo slicing." +msgstr "Nome del profilo di stampa utilizzato per l'elaborazione." msgid "Filament preset name" -msgstr "Nome del preset del filamento" +msgstr "Nome del profilo del filamento" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Nomi dei preset di filamento utilizzati per lo slicing. La variabile è un " -"vettore contenente un nome per ogni estrusore." +"Nomi dei profili di filamento utilizzati per l'elaborazione. La variabile è " +"un vettore contenente un nome per ogni estrusore." msgid "Printer preset name" -msgstr "Nome del preset della stampante" +msgstr "Nome del profilo della stampante" msgid "Name of the printer preset used for slicing." -msgstr "Nome del preset della stampante utilizzato per lo slicing." +msgstr "Nome del profilo della stampante utilizzato per l'elaborazione." msgid "Physical printer name" msgstr "Nome della stampante fisica" msgid "Name of the physical printer used for slicing." -msgstr "Nome della stampante fisica utilizzata per lo slicing." +msgstr "Nome della stampante fisica utilizzata per l'elaborazione." + +msgid "Number of extruders" +msgstr "Numero di estrusori" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Numero totale di estrusori, indipendentemente dal fatto che siano utilizzati " +"nella stampa corrente." msgid "Layer number" -msgstr "Numero del layer" +msgstr "Numero dello strato" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -"Indice del layer corrente. Basato su uno (cioè il primo livello è il numero " -"1)." +"Indice dello strato attuale. Basato su uno (cioè il primo livello è il " +"numero 1)." -msgid "Layer z" -msgstr "Layer Z" +msgid "Layer Z" +msgstr "Strato Z" msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." msgstr "" -"Altezza del layer attuale sopra il piano di stampa, misurata fino alla parte " -"superiore del layer." +"Altezza dello strato attuale sopra il piano di stampa, misurata fino alla " +"parte superiore dello strato." -msgid "Maximal layer z" -msgstr "Layer massimo z" +msgid "Maximal layer Z" +msgstr "Massimale strato Z" msgid "Height of the last layer above the print bed." -msgstr "Altezza dell'ultimo layer sopra il piano di stampa." +msgstr "Altezza dell'ultimo strato sopra il piano di stampa." msgid "Filament extruder ID" msgstr "ID estrusore di filamento" msgid "The current extruder ID. The same as current_extruder." -msgstr "L'ID dell'estrusore corrente. Come current_extruder." +msgstr "L'ID dell'estrusore attuale. Equivalente a current_extruder." msgid "Error in zip archive" msgstr "Errore nell'archivio zip" @@ -14526,22 +18056,19 @@ msgid "Generating infill toolpath" msgstr "Generazione percorso utensile di riempimento" msgid "Detect overhangs for auto-lift" -msgstr "Rilevare le sporgenze per il sollevamento automatico" - -msgid "Generating support" -msgstr "Generazione supporto" +msgstr "Rilevamento sporgenze per il sollevamento automatico" msgid "Checking support necessity" -msgstr "Verifica necessità di supporto" +msgstr "Verifica necessità di supporti" msgid "floating regions" -msgstr "regioni galleggianti" +msgstr "regioni fluttuanti" msgid "floating cantilever" -msgstr "cantilever galleggiante" +msgstr "sbalzo fluttuante" msgid "large overhangs" -msgstr "ampie sporgenze" +msgstr "sporgenze ampie" #, c-format, boost-format msgid "" @@ -14551,85 +18078,69 @@ msgstr "" "Sembra che l'oggetto %s ha %s. Orienta nuovamente l'oggetto o abilita la " "generazione dei supporti." +msgid "Generating support" +msgstr "Generazione supporti" + msgid "Optimizing toolpath" msgstr "Ottimizzazione del percorso utensile" msgid "Slicing mesh" -msgstr "Slicing mesh" +msgstr "Elaborazione maglia" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"Non sono stati rilevati layers. Ripara il file STL o controlla le dimensioni " +"Non sono stati rilevati strati. Ripara il file STL o controlla le dimensioni " "o lo spessore e riprova.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "La compensazione delle dimensioni XY di un oggetto non verrà utilizzata " -"perché è anche dipinta a colori.\n" +"perché è anche dipinto a colori.\n" "La compensazione delle dimensioni XY non può essere combinata con la " "colorazione." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Supporto: generazione percorso utensile al layer %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Supporto: rilevamento sporgenze" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Supporto: generazione punti di contatto" -msgid "Support: propagate branches" -msgstr "Supporto: propagazione rami" +msgid "Loading of a model file failed." +msgstr "Caricamento file del modello non riuscito." -msgid "Support: draw polygons" -msgstr "Supporto: disegno poligoni" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Supporto: generazione percorso utensile" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Supporto: generazione poligoni al layer %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Supporto: correzione dei buchi nel layer %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Supporto: propagazione rami al layer %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Impossibile leggere il file fornito perché è vuoto" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .stl, .obj " -"o .amf(.xml)." - -msgid "Loading of a model file failed." -msgstr "Caricamento file del modello non riuscito." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Impossibile leggere il file fornito perché è vuoto." +"Formato file sconosciuto: il file di input deve avere un'estensione .stl, ." +"obj o .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." -"amf." - -msgid "Canceled" -msgstr "Annullato" +"Formato file sconosciuto: il file di input deve avere un'estensione .3mf o ." +"zip.amf." msgid "load_obj: failed to parse" -msgstr "load_obj: analisi non riuscita" +msgstr "load_obj: impossibile analizzare" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "carica mtl in obj: impossibile analizzare" msgid "The file contains polygons with more than 4 vertices." msgstr "Il file contiene poligoni con più di 4 vertici." @@ -14697,7 +18208,7 @@ msgid "Calibration not supported" msgstr "Calibrazione non supportata" msgid "Error desc" -msgstr "Errore desc" +msgstr "Descrizione errore" msgid "Extra info" msgstr "Ulteriori informazioni" @@ -14706,7 +18217,7 @@ msgid "Flow Dynamics" msgstr "Dinamica del flusso" msgid "Flow Rate" -msgstr "Flusso" +msgstr "Flusso di stampa" msgid "Max Volumetric Speed" msgstr "Massima velocità volumetrica" @@ -14717,38 +18228,46 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Immettere valori validi:\n" "Valore iniziale: >= %.1f\n" "Valore finale: <= %.1f\n" "Valore finale: > Valore iniziale\n" -"Passo valore: >= %.3f)" +"Incremento valore: >= %.3f" msgid "The name cannot be empty." msgstr "Il nome non può essere vuoto." #, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "Il preset selezionato: %s non è stato trovato." +msgid "The selected preset: %s was not found." +msgstr "Il profilo selezionato: %s non è stato trovato." msgid "The name cannot be the same as the system preset name." -msgstr "" -"Il nome non può essere uguale al nome della preimpostazione di sistema." +msgstr "Il nome non può essere uguale al nome del profilo di sistema." msgid "The name is the same as another existing preset name" -msgstr "Il nome è lo stesso di un altro nome predefinito esistente" +msgstr "Il nome è lo stesso di un altro nome profilo esistente" msgid "create new preset failed." -msgstr "La creazione di un nuovo preset è fallita." +msgstr "creazione nuovo profilo non riuscita." + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Sei sicuro di annullare la calibrazione corrente e tornare alla home page?" +"Sei sicuro di annullare la calibrazione corrente e tornare alla pagina " +"iniziale?" msgid "No Printer Connected!" -msgstr "Nessuna stampante collegata!" +msgstr "Nessuna stampante connessa!" msgid "Printer is not connected yet." msgstr "La stampante non è ancora connessa." @@ -14757,31 +18276,26 @@ msgid "Please select filament to calibrate." msgstr "Selezionare il filamento da calibrare." msgid "The input value size must be 3." -msgstr "La dimensione del valore di input deve essere 3." +msgstr "La dimensione del valore immesso deve essere 3." msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" +"Questo tipo di macchina può contenere solo 16 risultati per ugello. Puoi " +"eliminare i risultati precedenti esistenti e quindi avviare la calibrazione, " +"oppure puoi continuare la calibrazione ma non puoi creare nuovi risultati di " +"calibrazione.\n" +"Vuoi comunque continuare la calibrazione?" -msgid "Connecting to printer..." -msgstr "Collegamento alla stampante..." - -msgid "The failed test result has been dropped." -msgstr "Il risultato del test non riuscito è stato eliminato." - -msgid "Flow Dynamics Calibration result has been saved to the printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" msgstr "" -"Il risultato della calibrazione di Flow Dynamics è stato salvato nella " -"stampante" #, c-format, boost-format msgid "" @@ -14793,13 +18307,31 @@ msgstr "" "può essere salvato solo uno. Sei sicuro di voler sovrascrivere il risultato " "precedente?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." +"Questo tipo di macchina può contenere solo %d risultati per ogni ugello. " +"Questo risultato non verrà salvato." + +msgid "Connecting to printer..." +msgstr "Connessione alla stampante..." + +msgid "The failed test result has been dropped." +msgstr "Il risultato del test non riuscito è stato eliminato." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" +"Il risultato della calibrazione della dinamica del flusso è stato salvato " +"sulla stampante." msgid "Internal Error" msgstr "Errore interno" @@ -14807,15 +18339,14 @@ msgstr "Errore interno" msgid "Please select at least one filament for calibration" msgstr "Si prega di selezionare almeno un filamento per la calibrazione" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" -"Il risultato della calibrazione della portata è stato salvato nella " -"preimpostazione" +"Il risultato della calibrazione della portata è stato salvato nel profilo." -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "Il risultato della calibrazione della velocità volumetrica massima è stato " -"salvato in un valore preimpostato" +"salvato nel profilo." msgid "When do you need Flow Dynamics Calibration" msgstr "Quando è necessaria la calibrazione della dinamica del flusso" @@ -14826,19 +18357,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Ora abbiamo aggiunto la calibrazione automatica per diversi filamenti, che è " -"completamente automatizzata e il risultato verrà salvato nella stampante per " -"un uso futuro. È necessario eseguire la calibrazione solo nei seguenti casi " -"limitati:\n" -"1. Se si introduce un nuovo filamento di marche/modelli diversi o il " -"filamento è umido;\n" -"2. se l'ugello è usurato o sostituito con uno nuovo;\n" -"3. Se la velocità volumetrica massima o la temperatura di stampa vengono " -"modificate nell'impostazione del filamento." msgid "About this calibration" msgstr "Informazioni su questa calibrazione" @@ -14862,6 +18384,27 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"Per maggiori dettagli sulla calibrazione della dinamica del flusso, consulta " +"il nostro Wiki.\n" +"\n" +"Di solito la calibrazione non è necessaria. Quando si avvia una stampa " +"monocolore/materiale, con l'opzione \"Calibrazione dinamica flusso\" " +"selezionata nel menu di avvio della stampa, la stampante seguirà il vecchio " +"metodo, ovvero calibrerà il filamento prima della stampa; quando si avvia " +"una stampa multicolore/materiale, la stampante utilizzerà il parametro di " +"compensazione predefinito per il filamento durante ogni cambio di filamento, " +"il che darà buoni risultati nella maggior parte dei casi.\n" +"\n" +"Si prega di notare che ci sono alcuni casi che possono rendere inaffidabili " +"i risultati della calibrazione, come un'adesione insufficiente sul piano di " +"stampa. È possibile migliorare l'adesione lavando il piatto o applicando " +"della colla. Per maggiori informazioni su questo argomento, fare riferimento " +"al nostro Wiki.\n" +"\n" +"Secondo le nostre prove, i risultati della calibrazione hanno una " +"fluttuazione di circa il 10 percento, il che potrebbe causare un risultato " +"non esattamente uguale in ogni calibrazione. Stiamo ancora indagando sulla " +"causa principale per apportare miglioramenti con nuovi aggiornamenti." msgid "When to use Flow Rate Calibration" msgstr "Quando utilizzare la calibrazione della portata" @@ -14870,25 +18413,24 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"Dopo aver utilizzato la calibrazione di Flow Dynamics, potrebbero esserci " -"ancora alcuni problemi di estrusione, ad esempio:\n" +"Dopo aver utilizzato la calibrazione della dinamica del flusso, potrebbero " +"esserci ancora alcuni problemi di estrusione, ad esempio:\n" "1. Sovraestrusione: materiale in eccesso sull'oggetto stampato, formazione " -"di bolle o brufoli o strati che sembrano più spessi del previsto e non " -"uniformi.\n" -"2. Sottoestrusione: strati molto sottili, resistenza al riempimento debole o " -"spazi vuoti nello strato superiore del modello, anche quando si stampa " -"lentamente.\n" +"di grumi o strati che sembrano più spessi del previsto e non uniformi\n" +"2. Sottoestrusione: strati molto sottili, resistenza del riempimento debole " +"o spazi vuoti nello strato superiore del modello, anche quando si stampa " +"lentamente\n" "3. Scarsa qualità della superficie: la superficie delle stampe sembra ruvida " -"o irregolare.\n" +"o irregolare\n" "4. Integrità strutturale debole: le stampe si rompono facilmente o non " -"sembrano robuste come dovrebbero essere." +"sembrano robuste come dovrebbero essere" msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -14914,7 +18456,7 @@ msgstr "" "calibrati e messi a punto. Per un filamento normale, di solito non è " "necessario eseguire una calibrazione della portata, a meno che non si vedano " "ancora i difetti elencati dopo aver eseguito altre calibrazioni. Per " -"maggiori dettagli, consulta l'articolo wiki." +"maggiori dettagli, consulta l'articolo Wiki." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -14946,8 +18488,8 @@ msgstr "" "o del filamento. Stiamo ancora migliorando l'accuratezza e la compatibilità " "di questa calibrazione attraverso aggiornamenti del firmware nel tempo.\n" "\n" -"Attenzione: La taratura della portata è un processo avanzato, che può essere " -"tentato solo da coloro che ne comprendono appieno lo scopo e le " +"Attenzione: la calibrazione della portata è un processo avanzato, che può " +"essere tentato solo da coloro che ne comprendono appieno lo scopo e le " "implicazioni. Un uso errato può causare stampe scadenti o danni alla " "stampante. Assicurati di leggere attentamente e comprendere il processo " "prima di farlo." @@ -14977,61 +18519,48 @@ msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." msgstr "" -"Parte della calibrazione non è riuscita! È possibile pulire la piastra e " +"Parte della calibrazione non è riuscita! È possibile pulire il piatto e " "riprovare. Il risultato del test non riuscito verrebbe eliminato." msgid "" "*We recommend you to add brand, materia, type, and even humidity level in " "the Name" msgstr "" -"*Ti consigliamo di aggiungere marca, materia, tipo e persino livello di " +"*Ti consigliamo di aggiungere marca, materiale, tipo e persino livello di " "umidità nel Nome" -msgid "Failed" -msgstr "Fallito" - msgid "Please enter the name you want to save to printer." msgstr "Immettere il nome che si desidera salvare nella stampante." msgid "The name cannot exceed 40 characters." msgstr "Il nome non può superare i 40 caratteri." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Verrà salvato solo uno dei risultati con lo stesso nome. Sei sicuro di voler " -"sostituire gli altri risultati?" - msgid "Please find the best line on your plate" msgstr "Trova la linea migliore nel tuo piatto" msgid "Please find the corner with perfect degree of extrusion" -msgstr "Prego Individua l'angolo con il grado di estrusione ideale" +msgstr "Individua l'angolo con il grado di estrusione ideale" msgid "Input Value" msgstr "Valore di input" msgid "Save to Filament Preset" -msgstr "Salva nel preset del filamento" - -msgid "Preset" -msgstr "Preselezionato" +msgstr "Salva nel profilo del filamento" msgid "Record Factor" -msgstr "Fattore record" +msgstr "Registra fattore" msgid "We found the best flow ratio for you" -msgstr "Abbiamo trovato il miglior rapporto di flusso per te" +msgstr "Abbiamo trovato il miglior flusso di stampa per te" msgid "Flow Ratio" -msgstr "Rapporto di flusso" +msgstr "Flusso di stampa" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "Immettere un valore valido (rapporto di flusso 0,0 < < 2,0)" +msgstr "Si prega di immettere un valore valido (0.0 < flusso di stampa < 2.0)" msgid "Please enter the name of the preset you want to save." -msgstr "Immettere il nome del preset che si desidera salvare." +msgstr "Immettere il nome del profilo che si desidera salvare." msgid "Calibration1" msgstr "Calibrazione1" @@ -15051,17 +18580,16 @@ msgstr "Salta calibrazione2" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "Rapporto di flusso : %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "Si prega di scegliere un blocco con la superficie superiore più liscia" +msgstr "flusso di stampa : %s " msgid "Please choose a block with smoothest top surface." msgstr "" "Si prega di scegliere un blocco con la superficie superiore più liscia." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "Inserire un valore valido (0 <= Velocità volumetrica massima <= 60)" +msgstr "" +"Si prega di inserire un valore valido (0 <= Velocità volumetrica massima <= " +"60)" msgid "Calibration Type" msgstr "Tipo di calibrazione" @@ -15070,7 +18598,7 @@ msgid "Complete Calibration" msgstr "Calibrazione completa" msgid "Fine Calibration based on flow ratio" -msgstr "Calibrazione fine in base al rapporto di flusso" +msgstr "Calibrazione fine basata sul flusso di stampa" msgid "Title" msgstr "Titolo" @@ -15079,28 +18607,43 @@ msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"Verrà stampato un modello di prova. Si prega di pulire il piatto di stampa e " +"Verrà stampato un modello di prova. Si prega di pulire il piatto e " "riposizionarlo sul piano riscaldato prima della calibrazione." msgid "Printing Parameters" msgstr "Parametri di stampa" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Tipo di piatto" msgid "filament position" -msgstr "Posizione del filamento" - -msgid "External Spool" -msgstr "Bobina esterna" +msgstr "posizione del filamento" msgid "Filament For Calibration" -msgstr "Calibrazione per Filamento" +msgstr "Calibrazione per filamento" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Suggerimenti per la calibrazione dei materiali: \n" "- Materiali che possono condividere la stessa temperatura del piano " @@ -15109,7 +18652,7 @@ msgstr "" "Matte)" msgid "Pattern" -msgstr "Trama" +msgstr "Modello" msgid "Method" msgstr "Metodo" @@ -15120,67 +18663,101 @@ msgstr "%s non è compatibile con %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" -"Il TPU non è supportato per la calibrazione automatica di Flow Dynamics." +"Il TPU non è supportato per la calibrazione automatica della dinamica del " +"flusso." + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" msgid "Connecting to printer" -msgstr "Collegamento alla stampante" +msgstr "Connessione alla stampante" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" msgid "From k Value" -msgstr "Da k Valore" +msgstr "Dal valore k" msgid "To k Value" msgstr "Al valore k" msgid "Step value" -msgstr "Valore del passaggio" +msgstr "Valore incremento" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "" -"Il diametro del nozzle è stato sincronizzato dalle impostazioni della " +"Il diametro dell'ugello è stato sincronizzato dalle impostazioni della " "stampante" msgid "From Volumetric Speed" msgstr "Dalla velocità volumetrica" msgid "To Volumetric Speed" -msgstr "Velocità volumetrica" +msgstr "Alla velocità volumetrica" + +msgid "Are you sure you want to cancel this print?" +msgstr "Sei sicuro di voler annullare la stampa?" msgid "Flow Dynamics Calibration Result" msgstr "Risultato della calibrazione della dinamica del flusso" msgid "New" -msgstr "New" +msgstr "Nuovo" msgid "No History Result" msgstr "Nessun risultato della cronologia" msgid "Success to get history result" -msgstr "Successo per ottenere il risultato della cronologia" +msgstr "Risultato della cronologia ottenuto con successo" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "Aggiornamento dei record storici di calibrazione di Flow Dynamics" +msgstr "" +"Aggiornamento della cronologia dei dati di calibrazione della dinamica del " +"flusso" msgid "Action" msgstr "Azione" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" +"Questo tipo di macchina può contenere solo %d risultati per ogni ugello." msgid "Edit Flow Dynamics Calibration" -msgstr "Modifica calibrazione dinamica flusso (Edit Flow Dynamics)" +msgstr "Modifica calibrazione dinamica flusso" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "Nuova calibrazione dinamica flusso" msgid "Ok" msgstr "Ok" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "Il filamento deve essere selezionato." + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" -msgstr "Ricerca network" +msgstr "Ricerca di rete" msgid "Address" msgstr "Indirizzo" @@ -15212,52 +18789,70 @@ msgstr "" "Selezionare quello da utilizzare." msgid "PA Calibration" -msgstr "Calibrazione PA" - -msgid "DDE" -msgstr "Estrusore Diretto" - -msgid "Bowden" -msgstr "Bowden" +msgstr "Calibrazione AP" msgid "Extruder type" msgstr "Tipo di estrusore" +msgid "DDE" +msgstr "Estrusore Diretto" + msgid "PA Tower" -msgstr "Torre PA" +msgstr "Torre AP" msgid "PA Line" -msgstr "Linea PA" +msgstr "Linea AP" msgid "PA Pattern" -msgstr "Modello PA" +msgstr "Modello AP" msgid "Start PA: " -msgstr "Avvia PA: " +msgstr "Inizio AP: " msgid "End PA: " -msgstr "Fine PA: " +msgstr "Fine AP: " msgid "PA step: " -msgstr "Incremento PA: " +msgstr "Incremento AP: " + +msgid "Accelerations: " +msgstr "Accelerazioni: " + +msgid "Speeds: " +msgstr "Velocità: " msgid "Print numbers" msgstr "Stampa numeri" +msgid "Comma-separated list of printing accelerations" +msgstr "Elenco separato da virgole delle accelerazioni di stampa" + +msgid "Comma-separated list of printing speeds" +msgstr "Elenco separato da virgole delle velocità di stampa" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Immettere valori validi:\n" -"Avvia PA: >= 0.0\n" -"Fine PA: > Avvia PA\n" -"Passo PA: >= 0,001)" +"Inizio AP: >= 0.0\n" +"Fine AP: > Inizio AP\n" +"Incremento AP: >= 0,001" msgid "Temperature calibration" msgstr "Calibrazione della temperatura" +msgid "Filament type" +msgstr "Tipo filamento" + msgid "PLA" msgstr "PLA" @@ -15268,10 +18863,10 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" -msgstr "TPU (TPU)" +msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" @@ -15279,9 +18874,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Tipo filamento" - msgid "Start temp: " msgstr "Temperatura Iniziale: " @@ -15291,16 +18883,15 @@ msgstr "Temperatura finale: " msgid "Temp step: " msgstr "Incremento di temperatura: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Immettere valori validi:\n" -"Temperatura iniziale: <= 350\n" -"Temperatura finale: >= 170\n" -"Temperatura di inizio > Temperatura di fine + 5)" msgid "Max volumetric speed test" msgstr "Test di velocità volumetrica massima" @@ -15311,39 +18902,42 @@ msgstr "Velocità volumetrica iniziale: " msgid "End volumetric speed: " msgstr "Velocità volumetrica finale: " -msgid "step: " -msgstr "Incrementi: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Immettere valori validi:\n" "inizio > 0 \n" -"passo >= 0\n" -"fine > inizio + passo)" +"incremento >= 0\n" +"fine > inizio + incremento" msgid "VFA test" msgstr "Prova VFA" msgid "Start speed: " -msgstr "Velocità di avvio: " +msgstr "Velocità iniziale: " msgid "End speed: " msgstr "Velocità finale: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Immettere valori validi:\n" "Inizio > 10 \n" -"passo >= 0\n" -"fine > inizio + passo)" +"incremento >= 0\n" +"fine > inizio + incremento" msgid "Start retraction length: " msgstr "Lunghezza di retrazione iniziale: " @@ -15351,14 +18945,135 @@ msgstr "Lunghezza di retrazione iniziale: " msgid "End retraction length: " msgstr "Lunghezza di retrazione finale: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" -msgstr "Invia G-code all’host stampante" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" +msgstr "Invia G-code all'host di stampa" msgid "Upload to Printer Host with the following filename:" -msgstr "Carica all'Host di stampa con il seguente nome file:" +msgstr "Carica all'host di stampa con il seguente nome file:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "Usa la barra ( / ) come separatore di cartella se necessario." @@ -15367,7 +19082,7 @@ msgid "Upload to storage" msgstr "Carica nello spazio di archiviazione" msgid "Switch to Device tab after upload." -msgstr "" +msgstr "Dopo il caricamento, passa alla scheda Dispositivo." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" @@ -15377,7 +19092,7 @@ msgid "Upload" msgstr "Carica" msgid "Print host upload queue" -msgstr "Coda di caricamento Host di stampa" +msgstr "Coda caricamento host di stampa" msgid "ID" msgstr "ID" @@ -15396,28 +19111,47 @@ msgid "Filename" msgstr "Nome file" msgid "Cancel selected" -msgstr "Cancella selezione" +msgstr "Annulla selezione" msgid "Show error message" msgstr "Mostra messaggio d'errore" -msgid "Enqueued" +msgid "Queued" msgstr "Messo in coda" msgid "Uploading" msgstr "Caricamento" -msgid "Cancelling" +msgid "Canceling" msgstr "Annullamento" msgid "Error uploading to print host" -msgstr "Errore durante il caricamento dell'host di stampa" +msgstr "Errore durante il caricamento all'host di stampa" + +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Il tipo di piatto selezionato non corrisponde al file. Si prega di " +"confermare prima di avviare la stampa." + +msgid "Time-lapse" +msgstr "Timelapse" + +msgid "Heated Bed Leveling" +msgstr "Livellamento del piano riscaldato" + +msgid "Textured Build Plate (Side A)" +msgstr "Piano di stampa ruvido (Lato A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Piano di stampa liscio (Lato B)" msgid "Unable to perform boolean operation on selected parts" msgstr "Impossibile eseguire un'operazione booleana sulle parti selezionate" msgid "Mesh Boolean" -msgstr "Mesh booleano" +msgstr "Maglia booleana" msgid "Union" msgstr "Unione" @@ -15432,28 +19166,28 @@ msgid "Source Volume" msgstr "Volume sorgente" msgid "Tool Volume" -msgstr "Volume dell'utensile" +msgstr "Volume estrusore" msgid "Subtract from" msgstr "Sottrai da" msgid "Subtract with" -msgstr "Sottrai" +msgstr "Sottrai con" msgid "selected" msgstr "selezionato" msgid "Part 1" -msgstr "Partita #1" +msgstr "Parte 1" msgid "Part 2" -msgstr "Partita #2" +msgstr "Parte 2" msgid "Delete input" -msgstr "Eliminare l'input" +msgstr "Elimina input" msgid "Network Test" -msgstr "网络测试" +msgstr "Test di rete" msgid "Start Test Multi-Thread" msgstr "Avvia test multi-thread" @@ -15462,10 +19196,10 @@ msgid "Start Test Single-Thread" msgstr "Avvia test a thread singolo" msgid "Export Log" -msgstr "Esporta Log" +msgstr "Esporta registro" msgid "Snapmaker Orca Version:" -msgstr "" +msgstr "Versione di Snapmaker Orca:" msgid "System Version:" msgstr "Versione del sistema:" @@ -15473,123 +19207,128 @@ msgstr "Versione del sistema:" msgid "DNS Server:" msgstr "Server DNS:" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Prova Snapmaker Orca(GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Prova Snapmaker Orca(GitHub):" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "Prova bing.com" msgid "Test bing.com:" -msgstr "Test bing.com:" +msgstr "Prova bing.com:" msgid "Log Info" msgstr "Informazioni sul registro" msgid "Select filament preset" -msgstr "Seleziona il preset del filamento" +msgstr "Seleziona il profilo del filamento" msgid "Create Filament" msgstr "Crea filamento" msgid "Create Based on Current Filament" -msgstr "Crea in base al filamento corrente" +msgstr "Crea in base al filamento attuale" msgid "Copy Current Filament Preset " -msgstr "Copia il preset del filamento corrente " +msgstr "Copia il profilo del filamento attuale " msgid "Basic Information" msgstr "Informazioni di base" msgid "Add Filament Preset under this filament" -msgstr "Aggiungi il preset del filamento sotto questo filamento" +msgstr "Aggiungi il profilo del filamento sotto questo filamento" msgid "We could create the filament presets for your following printer:" -msgstr "Potremmo creare i preset di filamento per la tua seguente stampante:" +msgstr "Potremmo creare i profili di filamento per la tua seguente stampante:" msgid "Select Vendor" -msgstr "Selezionare Fornitore" +msgstr "Seleziona produttore" msgid "Input Custom Vendor" -msgstr "Inserisci fornitore personalizzato" +msgstr "Inserisci produttore personalizzato" msgid "Can't find vendor I want" -msgstr "Non riesco a trovare il fornitore che voglio" +msgstr "Non riesco a trovare il produttore che voglio" msgid "Select Type" -msgstr "Selezionare il Tipo" +msgstr "Seleziona il tipo" msgid "Select Filament Preset" -msgstr "Seleziona il preset del filamento" +msgstr "Seleziona il profilo del filamento" msgid "Serial" msgstr "Seriale" msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "ad es. Base, Opaco, Seta, Marmo" +msgstr "ad esempio Base, Opaco, Seta, Marmo" msgid "Filament Preset" -msgstr "Preset di filamento" +msgstr "Profilo filamento" msgid "Create" msgstr "Crea" msgid "Vendor is not selected, please reselect vendor." -msgstr "Il fornitore non è selezionato, riseleziona il fornitore." +msgstr "" +"Il produttore non è stato selezionato, si prega di selezionare nuovamente il " +"produttore." msgid "Custom vendor is not input, please input custom vendor." msgstr "" -"Il fornitore personalizzato non viene inserito, si prega di inserire il " +"Il produttore personalizzato non è stato inserito, si prega di inserire il " "fornitore personalizzato." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" -"\"Bambu\" o \"Generico\" non possono essere utilizzati come Fornitore per " +"\"Bambu\" o \"Generico\" non possono essere utilizzati come produttore per " "filamenti personalizzati." msgid "Filament type is not selected, please reselect type." msgstr "Il tipo di filamento non è selezionato, riselezionare il tipo." -msgid "Filament serial is not inputed, please input serial." -msgstr "Il seriale del filamento non è inserito, inserire il seriale." +msgid "Filament serial is not entered, please enter serial." +msgstr "" +"Il seriale del filamento non è stato inserito, si prega di inserire il " +"seriale." msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." msgstr "" -"Potrebbero essere presenti caratteri da evitare nel fornitore o nell'input " -"seriale del filamento. Si prega di eliminare e inserire nuovamente." +"Potrebbero essere presenti caratteri speciali nei valori immessi di " +"produttore o seriale del filamento. Si prega di eliminare e inserire " +"nuovamente." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -"Tutti gli input nel fornitore personalizzato o nel numero di serie sono " -"spazi. Si prega di inserire di nuovo." +"Tutti i valori immessi di produttore personalizzato o seriale sono spazi. Si " +"prega di inserire di nuovo." -msgid "The vendor can not be a number. Please re-enter." -msgstr "Il venditore non può essere un numero. Si prega di inserire di nuovo." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "Il produttore non può essere un numero. Si prega di inserire di nuovo." msgid "" "You have not selected a printer or preset yet. Please select at least one." msgstr "" -"Non è stata ancora selezionata una stampante o un Preset. Si prega di " +"Non hai ancora selezionato una stampante o un profilo. Si prega di " "selezionarne almeno uno." #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Il nome del filamento %s che hai creato esiste già. \n" -"Se continui nella creazione, il preset creato verrà visualizzato con il suo " +"Il nome del filamento %s che hai creato esiste già.\n" +"Se continui nella creazione, il profilo creato verrà visualizzato con il suo " "nome completo. Vuoi continuare?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "" -"Non è stato possibile creare alcuni preset esistenti, come indicato di " +"Non è stato possibile creare alcuni profili esistenti, come indicato di " "seguito:\n" msgid "" @@ -15601,12 +19340,12 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" -"Rinomineremo le preimpostazioni come \"Tipo di fornitore seriale @printer " -"selezionato\". \n" -"Per aggiungere il preset per più stampanti, vai alla selezione della " +"Rinomineremo i profili come \"Produttore Tipo Seriale @stampante selezionata" +"\".\n" +"Per aggiungere il profilo per più stampanti, vai alla selezione della " "stampante" msgid "Create Printer/Nozzle" @@ -15616,7 +19355,7 @@ msgid "Create Printer" msgstr "Crea stampante" msgid "Create Nozzle for Existing Printer" -msgstr "Creazione di un ugello per la stampante esistente" +msgstr "Crea ugello per stampante esistente" msgid "Create from Template" msgstr "Crea da modello" @@ -15625,28 +19364,34 @@ msgid "Create Based on Current Printer" msgstr "Crea in base alla stampante corrente" msgid "Import Preset" -msgstr "Importa Preset" +msgstr "Importa Profilo" msgid "Create Type" msgstr "Crea tipo" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "" -"La modello non è stato trovato. Si prega di selezionare nuovamente il " -"fornitore." - -msgid "Select Model" -msgstr "Seleziona modello" +"Il modello non è stato trovato. Si prega di selezionare nuovamente il " +"produttore." msgid "Select Printer" msgstr "Seleziona Stampante" +msgid "Select Model" +msgstr "Seleziona modello" + msgid "Input Custom Model" msgstr "Inserisci modello personalizzato" msgid "Can't find my printer model" msgstr "Non riesco a trovare il modello della mia stampante" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Rettangolo" @@ -15654,16 +19399,10 @@ msgid "Printable Space" msgstr "Spazio di stampa" msgid "Hot Bed STL" -msgstr "STL del Piano Riscaldato" - -msgid "Load stl" -msgstr "Carica stl" +msgstr "STL del piano riscaldato" msgid "Hot Bed SVG" -msgstr "SVG del Piano Riscaldato" - -msgid "Load svg" -msgstr "Carica svg" +msgstr "SVG del piano riscaldato" msgid "Max Print Height" msgstr "Altezza massima di stampa" @@ -15677,43 +19416,39 @@ msgstr "" "Eccezione nell'ottenere la dimensione del file, si prega di importare di " "nuovo." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" -"Il percorso preimpostato non viene trovato, riselezionare il fornitore." +"Percorso del profilo non trovato, selezionare nuovamente il produttore." msgid "The printer model was not found, please reselect." msgstr "Il modello della stampante non è stato trovato, riselezionare." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Il diametro del nozzle non trovato, riselezionare." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "" -"La configurazione predefinita della stampante non è stata trovata. Per " -"favore, seleziona nuovamente." +"La configurazione predefinita della stampante non è stata trovata. Si prega " +"di selezionare nuovamente." msgid "Printer Preset" -msgstr "Preimpostazione stampante" +msgstr "Profilo stampante" msgid "Filament Preset Template" -msgstr "Modello di preset di filamento" +msgstr "Modello profilo di filamento" msgid "Deselect All" msgstr "Deseleziona tutto" msgid "Process Preset Template" -msgstr "Modello di Impostazioni Predefinite del Processo" - -msgid "Back Page 1" -msgstr "Indietro Pagina 1" +msgstr "Modello profilo di processo" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Non avete ancora scelto l'impostazione predefinita della stampante in base " -"alla quale creare. Si prega di scegliere il fornitore e il modello della " -"stampante" +"Non hai ancora scelto il profilo della stampante di base sul quale creare. " +"Si prega di scegliere il produttore e il modello della stampante" msgid "" "You have entered an illegal input in the printable area section on the first " @@ -15722,10 +19457,6 @@ msgstr "" "Hai inserito un input non valido nella sezione dell'area stampabile nella " "prima pagina. Controlla prima di crearlo." -msgid "The custom printer or model is not inputed, place input." -msgstr "" -"La stampante o il modello personalizzato non viene immesso, inserire l'input." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15735,74 +19466,84 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" -"La configurazione predefinita della stampante che hai creato ha già una " -"configurazione predefinita con lo stesso nome. Vuoi sovrascriverla?\n" -"\tSì: Sovrascrivi la configurazione predefinita della stampante con lo " -"stesso nome, e le configurazioni predefinite del filamento e del processo " -"con lo stesso nome saranno ricreate,\n" -" mentre quelle senza lo stesso nome saranno conservate.\n" -" \tAnnulla: Non creare una configurazione predefinita, torna all'interfaccia " -"di creazione." +"Il nome del profilo della stampante che hai creato esiste già. Vuoi " +"sovrascriverlo?\n" +"\tSì: Sovrascrivi il profilo della stampante con lo stesso nome, e i profili " +"del filamento e del processo con lo stesso nome saranno ricreati,\n" +"mentre gli altri saranno conservati.\n" +"\tAnnulla: Non creare un profilo, torna alla pagina di creazione." msgid "You need to select at least one filament preset." -msgstr "È necessario selezionare almeno un preset filamento." +msgstr "È necessario selezionare almeno un profilo di filamento." msgid "You need to select at least one process preset." -msgstr "È necessario selezionare almeno un preset di processo." +msgstr "È necessario selezionare almeno un profilo di processo." msgid "Create filament presets failed. As follows:\n" -msgstr "La creazione dei preset di filamento non è riuscita. Come segue:\n" +msgstr "" +"Creazione dei profili di filamento non riuscita. Come indicato di seguito:\n" msgid "Create process presets failed. As follows:\n" -msgstr "La creazione dei predefiniti di processo non è riuscita. Come segue:\n" +msgstr "" +"Creazione dei profili di processo non riuscita. Come indicato di seguito:\n" -msgid "Vendor is not find, please reselect." -msgstr "Il fornitore non è stato trovato, si prega di riselezionare." +msgid "Vendor was not found, please reselect." +msgstr "Il produttore non è stato trovato, si prega di selezionare di nuovo." msgid "Current vendor has no models, please reselect." -msgstr "Il fornitore attuale non ha modelli, si prega di riselezionare." +msgstr "" +"Il produttore attuale non ha modelli, si prega di selezionare di nuovo." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"Non sono stati selezionati il fornitore e il modello o non sono stati " -"immessi il fornitore e il modello personalizzati." +"Il produttore e il modello non sono stati selezionati o non sono stati " +"immessi il produttore e il modello personalizzati." msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." msgstr "" -"Potrebbero essere presenti caratteri da evitare nel fornitore o nel modello " -"di stampante personalizzata. Si prega di eliminare e inserire nuovamente." +"Potrebbero essere presenti caratteri speciali nei valori immessi di " +"produttore o modello di stampante personalizzata. Si prega di eliminarli e " +"inserirli nuovamente." msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"Tutti gli input nel fornitore o nel modello di stampante personalizzata sono " -"spazi. Si prega di inserire di nuovo." +"Tutti i valori immessi di produttore o modello di stampante personalizzata " +"sono spazi. Si prega di inserirli di nuovo." msgid "Please check bed printable shape and origin input." msgstr "" -"Si prega di controllare la forma stampabile del letto e l'input dell'origine." +"Si prega di controllare la forma del piano stampabile e l'input dell'origine." msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -"Non hai ancora selezionato la stampante per sostituire l'ugello, scegli." +"Non hai ancora selezionato la stampante su cui sostituire l'ugello, " +"selezionala." -msgid "Create Printer Successful" -msgstr "Creazione di una stampante riuscita" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" -msgid "Create Filament Successful" -msgstr "Crea un filamento di successo" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "Creazione stampante riuscita" + +msgid "Filament Created Successfully" +msgstr "Creazione filamento riuscita" msgid "Printer Created" msgstr "Stampante creata" msgid "Please go to printer settings to edit your presets" -msgstr "" -"Vai alle impostazioni della stampante per modificare le tue preimpostazioni" +msgstr "Vai alle impostazioni della stampante per modificare i tuoi profili" msgid "Filament Created" msgstr "Filamento creato" @@ -15813,52 +19554,59 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Se necessario, vai alle impostazioni filamento per modificare i preset.\n" -"Tieni presente che la temperatura del nozzle, la temperatura del piano e la " -"massima velocità volumetrica hanno ciascuna un impatto significativo sulla " -"qualità di stampa. Impostali con attenzione." +"Se necessario, vai alle impostazioni filamento per modificare i profili.\n" +"Tieni presente che la temperatura dell'ugello, la temperatura del piatto e " +"la massima velocità volumetrica hanno ciascuna un impatto significativo " +"sulla qualità della stampa. Impostali con attenzione." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" +"\n" +"\n" +"Snapmaker Orca ha rilevato che la funzione di sincronizzazione dei profili " +"utente non è abilitata, il che potrebbe causare problemi per le impostazioni " +"del filamento nella pagina Dispositivo.\n" +"Fare clic su \"Sincronizza profili utente\" per abilitare la funzione di " +"sincronizzazione." msgid "Printer Setting" -msgstr "Impostazione della stampante" +msgstr "Impostazioni della stampante" msgid "Printer config bundle(.orca_printer)" -msgstr "Bundle di configurazione della stampante (.orca_printer)" +msgstr "Pacchetto di configurazione della stampante (.orca_printer)" msgid "Filament bundle(.orca_filament)" -msgstr "Bundle filamenti (.orca_filament)" +msgstr "Pacchetto di filamenti (.orca_filament)" msgid "Printer presets(.zip)" -msgstr "Preimpostazioni della stampante (.zip)" +msgstr "Profili stampante (.zip)" msgid "Filament presets(.zip)" -msgstr "Preimpostazioni del filamento (.zip)" +msgstr "Profili filamento (.zip)" msgid "Process presets(.zip)" -msgstr "Preimpostazioni di processo (.zip)" +msgstr "Profili di processo (.zip)" msgid "initialize fail" -msgstr "Inizializzazione non riuscita" +msgstr "inizializzazione non riuscita" msgid "add file fail" -msgstr "L'aggiunta del file non è riuscita" +msgstr "impossibile aggiungere il file" msgid "add bundle structure file fail" -msgstr "L'aggiunta del file della struttura del bundle non è riuscita" +msgstr "impossibile aggiungere il file di struttura del pacchetto" msgid "finalize fail" -msgstr "Finalizzazione non riuscita" +msgstr "finalizzazione non riuscita" msgid "open zip written fail" -msgstr "apri zip scritto non riuscito" +msgstr "impossibile aprire file zip" msgid "Export successful" msgstr "Esportazione riuscita" @@ -15872,63 +19620,63 @@ msgid "" msgstr "" "La cartella '%s' esiste già nella directory corrente. Vuoi cancellarla e " "ricostruirla.\n" -"In caso contrario, verrà aggiunto un suffisso temporale e sarà possibile " -"modificare il nome dopo la creazione." +"In caso contrario, verrà aggiunto un suffisso temporale e potrai modificare " +"il nome dopo la creazione." + +#, c-format, boost-format +msgid "" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"Stampante e tutte le preimpostazioni di filamento e processo che " -"appartengono alla stampante. \n" +"Stampante e tutti profili di filamento e processo che appartengono alla " +"stampante.\n" "Può essere condiviso con altri." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Set di preimpostazioni di riempimento dell'utente. \n" +"Serie di profili di filamento dell'utente.\n" "Può essere condiviso con altri." msgid "" "Only display printer names with changes to printer, filament, and process " "presets." msgstr "" -"Mostrare solo i nomi delle stampanti con modifiche alle impostazioni " -"predefinite della stampante, del filamento e del processo." +"Nomi delle stampanti con modifiche ai profili di stampante, filamento e " +"processo." msgid "Only display the filament names with changes to filament presets." -msgstr "" -"Mostrare solo i nomi dei filamenti con modifiche alle impostazioni " -"predefinite del filamento." +msgstr "Nomi dei filamenti con modifiche ai profili di filamento." msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi delle stampanti con le preimpostazioni " -"della stampante dell'utente e ogni preimpostazione scelta verrà esportata " -"come zip." +"Nomi delle stampanti con profili creati dell'utente.\n" +"Tutti i profili selezionati saranno esportati come file zip." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi dei filamenti con le preimpostazioni dei " -"filamenti dell'utente, \n" -"E tutte le preimpostazioni del filamento utente in ogni nome di filamento " -"selezionato verranno esportate come ZIP." +"Nomi dei filamenti con profili creati dell'utente.\n" +"Tutti i profili selezionati saranno esportati come file zip." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi delle stampanti con le impostazioni " -"predefinite del processo modificate,\n" -" e tutte le impostazioni predefinite del processo dell'utente in ogni nome " -"della stampante selezionato saranno esportate come un file zip." +"Nomi delle stampanti con profili di processo modificati.\n" +"Tutti i profili selezionati saranno esportati come file zip." msgid "Please select at least one printer or filament." msgstr "Seleziona almeno una stampante o un filamento." @@ -15937,51 +19685,59 @@ msgid "Please select a type you want to export" msgstr "Seleziona il tipo che desideri esportare" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" +"Impossibile creare la cartella temporanea. Si prega di provare ad esportare " +"la configurazione di nuovo." msgid "Edit Filament" msgstr "Modifica filamento" msgid "Filament presets under this filament" -msgstr "Filamento preimpostato sotto questo filamento" +msgstr "Profli filamento basati su questo filamento" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Nota: Se l'unico preset sotto questo filamento viene eliminato, il filamento " -"verrà cancellato dopo aver chiuso la finestra di dialogo." +"Nota: Se viene eliminato l'unico profilo basato su questo filamento, il " +"filamento verrà eliminato dopo l'uscita dalla finestra di dialogo." -msgid "Presets inherited by other presets can not be deleted" -msgstr "I preset ereditati da altri preset non possono essere eliminati" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "I profili ereditati da altri profili non possono essere eliminati" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "I seguenti preset ereditano questo preset." -msgstr[1] "I seguenti preset ereditano questo preset." +msgstr[0] "Il seguente profilo eredita questo profilo." +msgstr[1] "I seguenti profili ereditano questo profilo." msgid "Delete Preset" -msgstr "Elimina Predefinito" - -msgid "Are you sure to delete the selected preset?" -msgstr "Sei sicuro di voler eliminare il preset selezionato?" - -msgid "Delete preset" -msgstr "Cancella preset" - -msgid "+ Add Preset" -msgstr "+ Aggiungi preset" - -msgid "Delete Filament" -msgstr "Elimina filamento" +msgstr "Elimina profilo" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Sei sicuro di voler eliminare il profilo selezionato?\n" +"Se la profilo corrisponde a un filamento attualmente in uso sulla stampante, " +"reimpostare le informazioni sul filamento per tale slot." + +msgid "Are you sure to delete the selected preset?" +msgstr "Sei sicuro di voler eliminare il profilo selezionato?" + +msgid "Delete preset" +msgstr "Elimina profilo" + +msgid "+ Add Preset" +msgstr "+ Aggiungi profilo" + +msgid "" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Tutti i preset di filamento appartenenti a questo filamento verranno " -"eliminati. \n" +"Tutti i profili di filamento appartenenti a questo filamento verranno " +"eliminati.\n" "Se stai utilizzando questo filamento sulla tua stampante, reimposta le " "informazioni sul filamento per quello slot." @@ -15989,27 +19745,25 @@ msgid "Delete filament" msgstr "Elimina filamento" msgid "Add Preset" -msgstr "Aggiungi preset" +msgstr "Aggiungi profilo" msgid "Add preset for new printer" -msgstr "Aggiungi preimpostazione per la nuova stampante" +msgstr "Aggiungi profilo per la nuova stampante" msgid "Copy preset from filament" -msgstr "Copia preset dal filamento" +msgstr "Copia profilo dal filamento" msgid "The filament choice not find filament preset, please reselect it" -msgstr "" -"La scelta del filamento non trova il preset del filamento, si prega di " -"riselezionarlo" +msgstr "Profilo del filamento non trovato, si prega di selezionarne un'altro" msgid "[Delete Required]" -msgstr "[Elimina obbligatorio]" +msgstr "[Eliminazione necessaria]" msgid "Edit Preset" -msgstr "Modifica preset" +msgstr "Modifica profilo" msgid "For more information, please check out Wiki" -msgstr "Per ulteriori informazioni, consulta Wiki" +msgstr "Per ulteriori informazioni, consulta il Wiki" msgid "Collapse" msgstr "Riduci" @@ -16018,66 +19772,111 @@ msgid "Daily Tips" msgstr "Consigli giornalieri" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "nozzle memorizzato: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Il diametro del nozzle preimpostato non è coerente con il diametro di quello " -"memorizzato. Hai cambiato l'ugello ultimamente?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*La stampa del materiale %s con %s può causare danni al nozzle." +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Hai bisogno di selezionare la stampante" msgid "The start, end or step is not valid value." -msgstr "L'inizio, la fine o il passo non sono valori validi." +msgstr "L'inizio, la fine o l'incremento non sono valori validi." + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" "Impossibile calibrare: forse perché l'intervallo di valori di calibrazione " -"impostato è troppo ampio o il passo è troppo piccolo" +"impostato è troppo ampio o l'incremento è troppo piccolo" msgid "Physical Printer" -msgstr "Stampante Fisica" +msgstr "Stampante fisica" msgid "Print Host upload" -msgstr "Caricamento Host di stampa" +msgstr "Caricamento host di stampa" msgid "Could not get a valid Printer Host reference" -msgstr "Impossibile ottenere un riferimento Host Stampante valido" +msgstr "Impossibile ottenere un riferimento host di stampa valido" msgid "Success!" msgstr "Successo!" msgid "Are you sure to log out?" -msgstr "Sei sicuro di voler effettuare il logout?" - -msgid "Refresh Printers" -msgstr "Aggiorna Stampanti" +msgstr "Sei sicuro di volerti disconnettere?" msgid "View print host webui in Device tab" msgstr "" +"Visualizza l'interfaccia utente Web dell'host di stampa nella scheda " +"Dispositivo" msgid "Replace the BambuLab's device tab with print host webui" msgstr "" +"Sostituisci la scheda Dispositivo di BambuLab con l'interfaccia web " +"dell'host di stampa" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"File HTTPS CA opzionale. È necessario solo se si intende usare un HTTPS con " +"File HTTPS CA opzionale. È necessario solo se si utilizza HTTPS con " "certificato autofirmato." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "File di certificato (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "File di certificato (*.crt, *.pem)|*.crt;*.pem|Tutti i file|*.*" msgid "Open CA certificate file" msgstr "Apri file di certificato CA" @@ -16087,57 +19886,58 @@ msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"Su questo sistema, %s utilizza certificati HTTPS provenienti dal sistema " -"Certificate Store o da Keychain." +"Su questo sistema, %s utilizza certificati HTTPS provenienti dell'archivio " +"dei certificati di sistema o da portachiavi." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"Per utilizzare un file CA personalizzato, importa il tuo file CA sul " -"Certificate Store / Keychain." +"Per utilizzare un file CA personalizzato, importa il tuo file CA " +"sull'archivio dei certificati di sistema / portachiavi." msgid "Login/Test" -msgstr "" +msgstr "Accesso/Test" msgid "Connection to printers connected via the print host failed." msgstr "" -"Collegamento alle stampanti collegate tramite l'host di stampa fallito." +"Connessione alle stampanti collegate tramite l'host di stampa non riuscita." #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "Tipo di Host di stampa non corrispondente: %s" +msgstr "Tipo di host di stampa non corrispondente: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "La connessione ad AstroBox funziona correttamente." msgid "Could not connect to AstroBox" -msgstr "Impossibile connettere ad AstroBox" +msgstr "Impossibile connettersi ad AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Nota: è richiesta una versione di AstroBox 1.1.0 o successiva." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "La connessione a Duet funziona correttamente." msgid "Could not connect to Duet" -msgstr "Connessione a Duet fallita" +msgstr "Impossibile connettersi a Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Si è verificato un errore sconosciuto" msgid "Wrong password" msgstr "Password errata" msgid "Could not get resources to create a new connection" -msgstr "Non sono state trovate le risorse per stabilire una nuova connessione" +msgstr "Impossibile trovare le risorse per stabilire una nuova connessione" msgid "Upload not enabled on FlashAir card." msgstr "Caricamento non attivato sulla scheda FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" -"Connessione a FlashAir correttamente funzionante e caricamento abilitato." +"La connessione a FlashAir funziona correttamente e il caricamento è " +"abilitato." msgid "Could not connect to FlashAir" msgstr "Impossibile connettersi a FlashAir" @@ -16146,32 +19946,32 @@ msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Nota: è necessaria FlashAir con firmware 2.00.02 o successivo e funzione di " +"Nota: è necessario FlashAir con firmware 2.00.02 o successivo e funzione di " "caricamento attiva." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "La connessione a MKS funziona correttamente." msgid "Could not connect to MKS" -msgstr "Non è stato possibile connettersi a MKS" +msgstr "Impossibile connettersi a MKS" -msgid "Connection to OctoPrint works correctly." -msgstr "Connessione con OctoPrint funzionante." +msgid "Connection to OctoPrint is working correctly." +msgstr "La connessione con OctoPrint funziona correttamente." msgid "Could not connect to OctoPrint" msgstr "Impossibile connettersi ad OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Nota: è richiesta una versione di OctoPrint 1.1.0 o successiva." -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Collegamento a Prusa SL1 / SL1S correttamente funzionante." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "La connessione a Prusa SL1 / SL1S funziona correttamente." msgid "Could not connect to Prusa SLA" -msgstr "Connessione a Prusa SLA fallita" +msgstr "Impossibile connettersi a Prusa SLA" -msgid "Connection to PrusaLink works correctly." -msgstr "Il collegamento a PrusaLink funziona correttamente." +msgid "Connection to PrusaLink is working correctly." +msgstr "La connessione a PrusaLink funziona correttamente." msgid "Could not connect to PrusaLink" msgstr "Impossibile connettersi a PrusaLink" @@ -16196,20 +19996,20 @@ msgstr "" "Caricamento non riuscito. Non è stato trovato uno spazio di archiviazione " "adatto su %1%." -msgid "Connection to Prusa Connect works correctly." -msgstr "Il collegamento a Prusa Connect funziona correttamente." +msgid "Connection to Prusa Connect is working correctly." +msgstr "La connessione a Prusa Connect funziona correttamente." msgid "Could not connect to Prusa Connect" msgstr "Impossibile connettersi a Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "La connessione a Repetier funziona correttamente." msgid "Could not connect to Repetier" msgstr "Impossibile connettersi a Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Nota: è richiesta la versione di Repetier almeno 0.90.0." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "Nota: è richiesta la versione di Repetier 0.90.0 o successiva." #, boost-format msgid "" @@ -16225,7 +20025,7 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"L'analisi della risposta dell'host non è riuscita.\n" +"Analisi della risposta dell'host non riuscita.\n" "Corpo del messaggio: \"%1%\"\n" "Errore: \"%2%\"" @@ -16235,298 +20035,713 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"L'enumerazione delle stampanti host non è riuscita.\n" +"Enumerazione delle stampanti host non riuscita.\n" "Corpo messaggio: \"%1%\"\n" "Errore: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." +"Presenta un'altezza dello strato minore, che si traduce in linee di strato " +"quasi impercettibili e un'elevata qualità di stampa. È adatto alla maggior " +"parte dei casi di stampa." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta velocità e " +"accelerazione inferiori e il motivo di riempimento sparso è Giroide. Ciò si " +"traduce in una qualità di stampa molto più elevata, ma un tempo di stampa " +"molto più lungo." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta un'altezza " +"dello strato leggermente più grande, che si traduce in linee di strato quasi " +"impercettibili e tempi di stampa leggermente più brevi." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta un'altezza " +"dello strato maggiore, che si traduce in linee di strato leggermente " +"visibili, ma tempi di stampa più brevi." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." +"Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta linee di " +"strato più sottili, velocità e accelerazione inferiori e il motivo di " +"riempimento sparso è Giroide. Ciò si traduce in linee di strato quasi " +"invisibili e una qualità di stampa molto più elevata, ma tempi di stampa " +"molto più lunghi." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta linee di " +"strato più sottili, velocità e accelerazione inferiori e il motivo di " +"riempimento sparso è Giroide. Ciò si traduce in linee di strato sottili e " +"una qualità di stampa molto più elevata, ma tempi di stampa molto più lunghi." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" +"Presenta un'altezza dello strato normale, che si traduce in linee di strato " +"e qualità di stampa normali. Adatto alla maggior parte dei casi di stampa." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta più " +"perimetri di stampa e una densità di riempimento sparso più elevata. Ciò si " +"traduce in stampe più resistenti ma, allo stesso tempo, un maggiore consumo " +"di filamento e tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato maggiore, che si traduce in linee di strato più visibili e una " +"qualità di stampa inferiore, ma tempi di stampa leggermente più brevi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato maggiore, che si traduce in linee di strato più visibili e una " +"qualità di stampa inferiore, ma tempi di stampa più brevi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato minore, che si traduce in linee di strato meno visibili e una " +"migliore qualità di stampa, ma tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato minore, velocità e accelerazione inferiori e il motivo di " +"riempimento sparso è Giroide. Ciò si traduce in linee di strato meno visibii " +"e una qualità di stampa molto più elevata, ma tempi di stampa molto più " +"lunghi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato minore, che si traduce in linee di strato quasi impercettibili " +"e una qualità di stampa più elevata, ma tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato minore, velocità e accelerazione inferiori e il motivo di " +"riempimento sparso è Giroide. Ciò si traduce in in linee di strato quasi " +"impercettibili e una qualità di stampa molto più elevata, ma tempi di stampa " +"molto più lunghi." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,4 mm, presenta un'altezza " +"dello strato minore, che si traduce in linee di strato quasi impercettibili " +"e tempi di stampa più lunghi." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"Presenta un'altezza dello strato maggiore, che si traduce in linee di strato " +"visibili e qualità e tempo di stampa nella media." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,6 mm, presenta più " +"perimetri di stampa e una densità di riempimento sparso più elevata. Ciò si " +"traduce in stampe più resistenti ma, allo stesso tempo, un maggiore consumo " +"di filamento e tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,6 mm, presenta un'altezza " +"dello strato maggiore, che si traduce in linee di strato più visibili e una " +"qualità di stampa inferiore, ma in alcuni casi, tempi di stampa più brevi." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,6 mm, presenta un'altezza " +"dello strato maggiore, che si traduce in linee di strato molto più visibili " +"e una qualità di stampa molto più bassa, ma in alcuni casi, tempi di stampa " +"più brevi." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,6 mm, presenta un'altezza " +"dello strato minore, che si traduce in linee di strato meno visibili e una " +"qualità di stampa leggermente superiore, ma tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,6 mm, presenta un'altezza " +"dello strato minore, che si traduce in linee di stampa meno visibili e una " +"migliore qualità di stampa, ma tempi di stampa più lunghi." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" +"Rispetto al profilo predefinito di un ugello da 0,8 mm, presenta un'altezza " +"dello strato leggermente inferiore, che si traduce in linee di strato " +"leggermente più sottili ma comunque visibili e una qualità di stampa " +"leggermente superiore ma, in alcuni casi, tempi di stampa più lunghi." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Senza AMS" + +msgid "There is no device available to send printing." +msgstr "Non è disponibile alcun dispositivo per inviare la stampa." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" +"Il numero di stampanti usate contemporaneamente non può essere uguale a 0." + +msgid "Use External Spool" +msgstr "Utilizza bobina esterna" + +msgid "Select Printers" +msgstr "Seleziona stampanti" + +msgid "Device Name" +msgstr "Nome Dispositivo" + +msgid "Device Status" +msgstr "Stato Dispositivo" + +msgid "AMS Status" +msgstr "Stato AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Seleziona i dispositivi che desideri gestire qui (fino a 6 dispositivi)" + +msgid "Printing Options" +msgstr "Opzioni di stampa" + +msgid "Bed Leveling" +msgstr "Livellamento piatto" + +msgid "Flow Dynamic Calibration" +msgstr "Calibrazione dinamica del flusso" + +msgid "Send Options" +msgstr "Opzioni di invio" + +msgid "Send to" +msgstr "Invia a" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"stampanti in contemporanea. (Dipende da quanti dispositivi possono essere " +"riscaldati contemporaneamente.)" + +msgid "Wait" +msgstr "Attendi" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minuto per sessione. (Dipende quanto tempo impiega il riscaldamento " +"completo.)" + +msgid "Task Sending" +msgstr "Invio Attività" + +msgid "Task Sent" +msgstr "Attività Inviata" + +msgid "Edit multiple printers" +msgstr "Modifica più stampanti" + +msgid "Select connected printers (0/6)" +msgstr "Seleziona stampanti connesse (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Selezionare le stampanti collegate (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Il numero massimo di stampanti che possono essere selezionate è %d" + +msgid "No task" +msgstr "Nessuna attività" + +msgid "Edit Printers" +msgstr "Modifica Stampanti" + +msgid "Task Name" +msgstr "Nome Attività" + +msgid "Actions" +msgstr "Azioni" + +msgid "Task Status" +msgstr "Stato Attività" + +msgid "Sent Time" +msgstr "Tempo di invio" + +msgid "There are no tasks to be sent!" +msgstr "Non ci sono attività da inviare!" + +msgid "No historical tasks!" +msgstr "Nessuna cronologia delle attività!" + +msgid "Upgrading" +msgstr "Aggiornamento" + +msgid "syncing" +msgstr "sincronizzazione" + +msgid "Printing Finish" +msgstr "Stampa completata" + +msgid "Printing Failed" +msgstr "Stampa non riuscita" + +msgid "Printing Pause" +msgstr "Stampa in pausa" + +msgid "Pending" +msgstr "In attesa" + +msgid "Sending" +msgstr "Invio in corso" + +msgid "Sending Finish" +msgstr "Invio completato" + +msgid "Sending Cancel" +msgstr "Invio annullato" + +msgid "Sending Failed" +msgstr "Invio non riuscito" + +msgid "Print Success" +msgstr "Stampa completata con successo" + +msgid "Print Failed" +msgstr "Stampa non riuscita" + +msgid "Removed" +msgstr "Rimosso" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" -msgstr "" +msgstr "Connessione a Obico eseguita con successo!" msgid "Could not connect to Obico" -msgstr "" +msgstr "Impossibile connettersi a Obico" msgid "Connected to SimplyPrint successfully!" -msgstr "" +msgstr "Connessione a SimplyPrint eseguita con successo!" msgid "Could not connect to SimplyPrint" -msgstr "" +msgstr "Impossibile connettersi a SimplyPrint" msgid "Internal error" -msgstr "" +msgstr "Errore interno" msgid "Unknown error" -msgstr "" +msgstr "Errore sconosciuto" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" +"Profilo SimplyPrint non collegato. Vai alle opzioni di connessione per " +"configurarlo." -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." -msgstr "" +msgstr "Lo stato fornito non è corretto." msgid "Please give the required permissions when authorizing this application." msgstr "" +"Si prega di fornire i permessi necessari quando si autorizza questa " +"applicazione." msgid "Something unexpected happened when trying to log in, please try again." msgstr "" +"Si è verificato un problema imprevisto durante il tentativo di accesso. " +"Riprova." -msgid "User cancelled." +msgid "User canceled." +msgstr "Utente rimosso." + +msgid "Head diameter" +msgstr "Diametro testa" + +msgid "Max angle" +msgstr "Angolo massimo" + +msgid "Detection radius" +msgstr "Raggio di rilevamento" + +msgid "Remove selected points" +msgstr "Rimuovi punti selezionati" + +msgid "Remove all" +msgstr "Rimuovi tutto" + +msgid "Auto-generate points" +msgstr "Genera punti automaticamente" + +msgid "Add a brim ear" +msgstr "Aggiungi tesa ad orecchio" + +msgid "Delete a brim ear" +msgstr "Rimuovi tesa ad orecchio" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "Regola la vista della sezione" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Attenzione: il tipo di tesa non è impostato su \"Dipinto\", le tese ad " +"orecchio non avranno effetto!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " tese ad orecchio non valide" + +msgid "Brim Ears" +msgstr "Tese ad orecchio" + +msgid "Please select single object." +msgstr "Seleziona un singolo oggetto." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -16536,7 +20751,7 @@ msgid "" "consistency?" msgstr "" "Parete precisa\n" -"Sapevi che l'accensione precisa della parete può migliorare la precisione e " +"Sapevi che abilitare parete precisa può migliorare la precisione e " "l'uniformità degli strati?" #: resources/data/hints.ini: [hint:Sandwich mode] @@ -16546,10 +20761,10 @@ msgid "" "precision and layer consistency if your model doesn't have very steep " "overhangs?" msgstr "" -"Modalità sandwich\n" -"Sapevi che puoi utilizzare la modalità sandwich (interno-esterno-interno) " -"per migliorare la precisione e l'uniformità degli strati se il tuo modello " -"non presenta sporgenze molto ripide?" +"Modalità panino\n" +"Sapevi che puoi utilizzare la modalità panino (interno-esterno-interno) per " +"migliorare la precisione e l'uniformità degli strati se il tuo modello non " +"presenta sporgenze molto ripide?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" @@ -16557,7 +20772,8 @@ msgid "" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" "Temperatura della camera\n" -"Sapevi che Snapmaker Orca supporta la temperatura della camera?" +"Sapevi che Snapmaker Orca supporta la funzione di controllo della temperatura " +"della camera?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -16565,7 +20781,7 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" -"Taratura\n" +"Calibrazione\n" "Sapevi che calibrare la tua stampante può fare miracoli? Dai un'occhiata " "alla nostra amata soluzione di calibrazione in Snapmaker Orca." @@ -16574,17 +20790,17 @@ msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" -"Ventilatore ausiliario\n" -"Sapevi che Snapmaker Orca supporta la ventola di raffreddamento delle parti " -"ausiliarie?" +"Ventola ausiliaria\n" +"Sapevi che Snapmaker Orca supporta la ventola di raffreddamento ausiliaria?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" -"Filtrazione dell'aria/ventilatore di scarico\n" -"Sapevi che Snapmaker Orca può supportare la filtrazione dell'aria/Exhaust Fan?" +"Filtrazione dell'aria/Ventola di estrazione\n" +"Sapevi che Snapmaker Orca può supportare la filtrazione dell'aria/ventola di " +"estrazione?" #: resources/data/hints.ini: [hint:G-code window] msgid "" @@ -16592,7 +20808,7 @@ msgid "" "You can turn on/off the G-code window by pressing the C key." msgstr "" "Finestra G-code\n" -"È possibile attivare/disattivare la finestra del codice G premendo il tasto " +"È possibile attivare/disattivare la finestra del G-code premendo il tasto " "C ." #: resources/data/hints.ini: [hint:Switch workspaces] @@ -16601,19 +20817,19 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" -"Passare da un'area di lavoro all'altra\n" -"È possibile passare dall'area di lavoro Prepara a quella " -"Anteprima e viceversa premendo il tasto TAB ." +"Cambia spazio di lavoro\n" +"È possibile passare dall'area di lavoro Prepara ad Anteprima e " +"viceversa premendo il tasto TAB ." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Come utilizzare le scorciatoie da tastiera\n" "Sapevi che Snapmaker Orca offre un'ampia gamma di scorciatoie da tastiera e " -"operazioni di scena 3D." +"operazioni di scena 3D?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16621,9 +20837,9 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" -"Retromarcia su dispari\n" -"Sapevi che la retromarcia su elementi dispari può migliorare " -"significativamente la qualità della superficie delle tue sporgenze?" +"Inverti su strati dispari\n" +"Sapevi che la funzione Inverti su strati dispari può migliorare " +"significativamente la qualità delle superfici delle tue sporgenze?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16631,9 +20847,9 @@ msgid "" "Did you know that you can cut a model at any angle and position with the " "cutting tool?" msgstr "" -"Strumento di taglio\n" -"Sapevate che è possibile tagliare un modello in qualsiasi angolazione e " -"posizione con l'utensile di taglio?" +"Strumento Taglia\n" +"Sapevi che è possibile tagliare un modello in qualsiasi angolazione e " +"posizione con lo Strumento Taglia?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" @@ -16643,7 +20859,7 @@ msgid "" msgstr "" "Correggi modello\n" "Sapevi che puoi riparare un modello 3D danneggiato per evitare molti " -"problemi di slicing sul sistema Windows?" +"problemi di elaborazione su Windows?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -16656,7 +20872,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Disposizione automatica\n" "Sapevi che puoi disporre automaticamente tutti gli oggetti del tuo progetto?" @@ -16665,7 +20881,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Orientamento automatico\n" "Sapevi che puoi orientare gli oggetti in modo ottimale per la stampa con un " @@ -16679,8 +20895,8 @@ msgid "" "F key." msgstr "" "Posiziona su faccia\n" -"Sapevate che è possibile orientare rapidamente un modello in modo che una " -"delle sue facce si trovi sul piatto di stampa? Selezionare la funzione " +"Sapevi che è possibile orientare rapidamente un modello in modo che una " +"delle sue facce si trovi sul piano di stampa? Selezionare la funzione " "\"Posiziona su faccia\" o premere il tasto F ." #: resources/data/hints.ini: [hint:Object List] @@ -16690,7 +20906,7 @@ msgid "" "settings for each object/part?" msgstr "" "Elenco oggetti\n" -"Sapevate che è possibile visualizzare tutti gli oggetti/parti in un elenco e " +"Sapevi che è possibile visualizzare tutti gli oggetti/parti in un elenco e " "modificare le impostazioni per ciascun oggetto/parte?" #: resources/data/hints.ini: [hint:Search Functionality] @@ -16710,8 +20926,8 @@ msgid "" "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "Semplifica modello\n" -"Sapevi che puoi ridurre il numero di triangoli in una mesh utilizzando la " -"funzione Semplifica mesh? Fare clic con il pulsante destro del mouse sul " +"Sapevi che puoi ridurre il numero di triangoli in una maglia utilizzando la " +"funzione Semplifica maglia? Fare clic con il pulsante destro del mouse sul " "modello e selezionare Semplifica modello." #: resources/data/hints.ini: [hint:Slicing Parameter Table] @@ -16720,9 +20936,9 @@ msgid "" "Did you know that you can view all objects/parts on a table and change " "settings for each object/part?" msgstr "" -"Tabella Parametri Slicing\n" -"Sapevate che è possibile visualizzare tutti gli oggetti/parti di una tabella " -"e modificare le impostazioni di ciascun oggetto/parte?" +"Tabella parametri di elaborazione\n" +"Sapevi che è possibile visualizzare tutti gli oggetti/parti di una tabella e " +"modificare le impostazioni di ciascun oggetto/parte?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" @@ -16741,10 +20957,10 @@ msgid "" "part modifier? That way you can, for example, create easily resizable holes " "directly in Snapmaker Orca." msgstr "" -"Sottrazione di una parte\n" -"Sapevi che puoi sottrarre una mesh da un'altra usando il modificatore Parte " -"negativa? In questo modo è possibile, ad esempio, creare fori facilmente " -"ridimensionabili direttamente in Snapmaker Orca." +"Sottrai una parte\n" +"Sapevi che puoi sottrarre una maglia da un'altra usando il modificatore " +"Parte negativa? In questo modo è possibile, ad esempio, creare fori " +"facilmente ridimensionabili direttamente in Snapmaker Orca." #: resources/data/hints.ini: [hint:STEP] msgid "" @@ -16754,10 +20970,10 @@ msgid "" "Snapmaker Orca supports slicing STEP files, providing smoother results than a " "lower resolution STL. Give it a try!" msgstr "" -"PASSO\n" -"Sapevi che puoi migliorare la tua qualità di stampa tagliando un file STEP " +"STEP\n" +"Sapevi che puoi migliorare la tua qualità di stampa elaborando un file STEP " "invece di un STL?\n" -"Snapmaker Orca supporta il sezionamento dei file STEP, fornendo risultati più " +"Snapmaker Orca supporta l'elaborazione dei file STEP, fornendo risultati più " "uniformi rispetto a un STL a risoluzione inferiore. Provateci!" #: resources/data/hints.ini: [hint:Z seam location] @@ -16767,8 +20983,8 @@ msgid "" "paint it on your print, to have it in a less visible location? This improves " "the overall look of your model. Check it out!" msgstr "" -"Posizione giunzione Z\n" -"Sapevi che puoi personalizzare la posizione della giunzione Z e persino " +"Posizione cucitura Z\n" +"Sapevi che puoi personalizzare la posizione della cucitura Z e persino " "dipingerla sulla stampa, per averla in una posizione meno visibile? Ciò " "migliora l'aspetto generale del modello. Dai un'occhiata!" @@ -16779,10 +20995,10 @@ msgid "" "prints? Depending on the material, you can improve the overall finish of the " "printed model by doing some fine-tuning." msgstr "" -"Regolazione precisa del flusso\n" -"Sapevi che la velocità del flusso può essere regolata con precisione per " -"stampe ancora più belle? A seconda del materiale, è possibile migliorare la " -"finitura complessiva del modello stampato effettuando regolazioni precise." +"Regolazione precisa del flusso di stampa\n" +"Sapevi che la portata può essere regolata con precisione per stampe ancora " +"più belle? A seconda del materiale, è possibile migliorare la finitura " +"complessiva del modello stampato effettuando regolazioni precise." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" @@ -16793,7 +21009,7 @@ msgid "" msgstr "" "Dividi le stampe in piatti\n" "Sapevi che puoi dividere un modello con molte parti in singoli piatti pronti " -"per la stampa? Ciò semplificherà il processo di elaborazione di tutte le " +"per la stampa? Ciò semplificherà il processo di monitoraggio di tutte le " "parti." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer @@ -16803,9 +21019,9 @@ msgid "" "Did you know that you can print a model even faster, by using the Adaptive " "Layer Height option? Check it out!" msgstr "" -"Accelera la stampa con l'opzione Layer Adattativo\n" +"Accelera la stampa con Altezza strato adattiva\n" "Sapevi che puoi stampare un modello ancora più velocemente utilizzando " -"l'opzione Layer Adattativo? Scoprilo!" +"l'opzione Altezza strato adattiva? Scoprilo!" #: resources/data/hints.ini: [hint:Support painting] msgid "" @@ -16814,8 +21030,8 @@ msgid "" "makes it easy to place the support material only on the sections of the " "model that actually need it." msgstr "" -"Pitturare supporti\n" -"Sapevi che è possibile pitturare la posizione dei supporti? Questa funzione " +"Dipingi i supporti\n" +"Sapevi che è possibile dipingere la posizione dei supporti? Questa funzione " "consente di posizionare facilmente il materiale di supporto solo sulle " "sezioni del modello che ne hanno effettivamente bisogno." @@ -16826,8 +21042,8 @@ msgid "" "supports work great for organic models, while saving filament and improving " "print speed. Check them out!" msgstr "" -"Diversi tipi di supporto\n" -"Sapevate che potete scegliere tra diversi tipi di supporto? I supporti ad " +"Diversi tipi di supporti\n" +"Sapevi che è possibile scegliere tra diversi tipi di supporti? I supporti ad " "albero funzionano benissimo per i modelli organici, risparmiando filamento e " "migliorando la velocità di stampa. Scopriteli!" @@ -16838,28 +21054,28 @@ msgid "" "successfully? Higher temperature and lower speed are always recommended for " "the best results." msgstr "" -"Stampa di filamento Silk (seta)\n" -"Sapevi che il filamento seta richiede un'attenzione speciale per stampare " -"con successo? Una temperatura più alta e una velocità inferiore sono sempre " -"consigliate per ottenere i migliori risultati." +"Stampa con filamento effetto seta \n" +"Sapevi che il filamento con effetto seta richiede particolari accorgimenti " +"per essere stampato con successo? Una temperatura più alta e una velocità " +"inferiore sono sempre consigliate per ottenere i migliori risultati." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" -"Brim per una migliore adesione\n" -"Sapevate che quando i modelli stampati hanno una piccola interfaccia di " -"contatto con la superficie di stampa, si consiglia di utilizzare un brim?" +"Tesa per una migliore adesione\n" +"Sapevi che quando i modelli stampati hanno una piccola interfaccia di " +"contatto con il piano di stampa, si consiglia di utilizzare una tesa?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" -"Impostare i parametri per più oggetti\n" +"Imposta i parametri per più oggetti\n" "Sapevi che puoi impostare i parametri di elaborazione per tutti gli oggetti " "selezionati contemporaneamente?" @@ -16869,13 +21085,13 @@ msgid "" "Did you know that you can stack objects as a whole one?" msgstr "" "Impila oggetti\n" -"Sapevi che puoi impilare oggetti interi?" +"Sapevi che è possibile impilare gli oggetti come se fossero un tutt'uno?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Spurga nei supporti/oggetti/riempimenti\n" "Sapevi che puoi ridurre lo spreco di filamento spurgandolo nei supporti/" @@ -16888,21 +21104,22 @@ msgid "" "density to improve the strength of the model?" msgstr "" "Migliorare la resistenza\n" -"Sapevate che è possibile utilizzare un maggior numero di anelli a parete e " -"una maggiore densità riempimento per migliorare la resistenza del modello?" +"Sapevi che è possibile utilizzare un maggior numero di perimetri di stampa e " +"una maggiore densità di riempimento sparso per migliorare la resistenza del " +"modello?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"Quando è necessario stampare con lo sportello della stampante aperto\n" -"Sapevi che l'apertura dello sportello della stampante può ridurre la " -"probabilità di intasamento dell'estrusore/hotend quando si stampa filamento " -"a temperatura inferiore con una temperatura dell'involucro più elevata. " +"Quando è necessario stampare con lo sportello della stampante aperto?\n" +"Sapevi che aprendo lo sportello della stampante puoi ridurre la probabilità " +"di intasamento dell'estrusore/camera di estrusione quando si stampa un " +"filamento a bassa temperatura con una temperatura dell'involucro più elevata?" "Maggiori informazioni su questo nel Wiki." #: resources/data/hints.ini: [hint:Avoid warping] @@ -16910,12 +21127,1622 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" -"Evita la deformazione\n" +"Evita le deformazioni\n" "Sapevi che quando si stampano materiali soggetti a deformazioni come l'ABS, " "aumentare in modo appropriato la temperatura del piano riscaldato può " -"ridurre la probabilità di deformazione." +"ridurre la probabilità di deformazione?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Altezza strato adattiva" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Abilitando questa opzione, l'altezza degli strati dei supporti ad albero, " +#~ "eccetto il primo, verrà calcolata automaticamente." + +#~ msgid "AMS not connected" +#~ msgstr "AMS non collegato" + +#~ msgid "Ext Spool" +#~ msgstr "Bobina esterna" + +#~ msgid "Guide" +#~ msgstr "Guida" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Calibrazione AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Si è verificato un problema durante la calibrazione. Clicca per " +#~ "visualizzare la soluzione." + +#~ msgid "Calibrate again" +#~ msgstr "Calibra di nuovo" + +#~ msgid "Cancel calibration" +#~ msgstr "Annulla calibrazione" + +#~ msgid "Feed Filament" +#~ msgstr "Caricare il filamento" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "È necessario inserire una scheda SD prima di stampare tramite LAN." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "" +#~ "È necessario inserire una scheda SD prima di inviare il G-code alla " +#~ "stampante." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Nota: sono selezionabili solo gli slot AMS caricati con lo stesso tipo di " +#~ "materiale." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Se ci sono due filamenti identici nell'AMS, la sostituzione automatica " +#~ "del filamento AMS sarà abilitata.\n" +#~ "(Attualmente supporta la sostituzione automatica dei materiali di consumo " +#~ "con la stessa marca, tipo di materiale e colore)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "L'AMS stimerà la capacità residua del filamento Bambu dopo " +#~ "l'aggiornamento delle informazioni. Durante la stampa, la capacità " +#~ "residua verrà aggiornata automaticamente." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "La temperatura minima consigliata è inferiore a 190°C o la temperatura " +#~ "massima consigliata è superiore a 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "La modalità spirale funziona solo quando il valore dei perimetri di " +#~ "stampa è 1, i supporti sono disabilitati, il valore degli strati del " +#~ "guscio superiore è 0, la densità di riempimento sparso è 0 e il tipo di " +#~ "timelapse è tradizionale." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Modalità calibrazione XY" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausa per filamento esaurito" + +#~ msgid "Heating hotend" +#~ msgstr "Riscaldamento della camera di estrusione" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Calibrazione estrusione" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Stampa messa in pausa dall'utente" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pausa smontaggio della copertura frontale" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Calibrazione flusso estrusore" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "In pausa per malfunzionamento temperatura ugello" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "In pausa per malfunzionamento della temperatura del piatto" + +#~ msgid "Skip step pause" +#~ msgstr "Salta la pausa del passaggio" + +#~ msgid "Motor noise calibration" +#~ msgstr "Calibrazione del rumore del motore" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "In pausa a causa della perdita dell'AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "In pausa a causa della bassa velocità della ventola di raffreddamento" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "" +#~ "In pausa a causa di un errore di controllo della temperatura della camera" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Messo in pausa dal G-code inserito dall'utente" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pausa dovuta al rilevamento dell'accumulo di filamento nell'ugello" + +#~ msgid "Cutter error pause" +#~ msgstr "Pausa dovuta a errore di taglio" + +#~ msgid "First layer error pause" +#~ msgstr "Pausa dovuta a errore nel primo strato" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pausa dovuta a intasamento dell'ugello" + +#~ msgid "Fatal" +#~ msgstr "Irreversibile" + +#~ msgid "Serious" +#~ msgstr "Serio" + +#~ msgid "Common" +#~ msgstr "Comune" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "La temperatura attuale della camera o la temperatura obiettivo della " +#~ "camera supera i 45℃. Per evitare l'intasamento dell'estrusore, non è " +#~ "consentito caricare filamenti a bassa temperatura (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "È stato caricato un filamento a bassa temperatura (PLA/PETG/TPU) " +#~ "nell'estrusore. Per evitare l'intasamento dell'estrusore, non è " +#~ "consentito impostare una temperatura della camera superiore a 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF non è supportato dall'AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Un oggetto è posizionato oltre il limite del piatto o supera il limite di " +#~ "altezza.\n" +#~ "Risolvi il problema spostando l'oggetto completamente dentro o fuori il " +#~ "piatto, verificando che l'altezza rientri nel volume di costruzione." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Si trova in \"Impostazioni > Rete > Codice di accesso\".\n" +#~ "sulla stampante, come mostrato nella figura:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "La navigazione dei file sulla scheda SD non è supportata nel firmware " +#~ "attuale. Aggiornare il firmware della stampante." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Verifica se la scheda SD è inserita nella stampante.\n" +#~ "Se il problema di lettura persiste, prova a formattare la scheda SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "La navigazione dei file sulla scheda SD non è supportata in modalità Solo " +#~ "LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Memoria non disponibile, inserire la scheda SD." + +#~ msgid "Cham" +#~ msgstr "Camera" + +#~ msgid "Still unload" +#~ msgstr "Scarica ancora" + +#~ msgid "Still load" +#~ msgstr "Carica ancora" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Impossibile iniziare senza scheda SD." + +#~ msgid "Update" +#~ msgstr "Aggiorna" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "La sensibilità della pausa è" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Nessun filamento AMS. Selezionare una stampante nella pagina " +#~ "'Dispositivo' per caricare le informazioni AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "La sincronizzazione filamenti con AMS eliminerà tutti i profili e i " +#~ "colori dei filamenti attualmente selezionati. Vuoi continuare?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "È già stata effettuata una sincronizzazione; si desidera sincronizzare " +#~ "solo le modifiche o tutto?" + +#~ msgid "Sync" +#~ msgstr "Sincronizza" + +#~ msgid "Resync" +#~ msgstr "Risincronizza" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Ci sono alcuni filamenti sconosciuti mappati su un profilo generico. " +#~ "Aggiorna Snapmaker Orca o riavvia Snapmaker Orca per verificare se è presente un " +#~ "aggiornamento dei profili di sistema." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Sei sicuro di voler memorizzare gli SVG originali con i loro percorsi " +#~ "locali nel file 3MF?\n" +#~ "Se premi \"NO\", tutti gli SVG del progetto non saranno più modificabili." + +#~ msgid "Private protection" +#~ msgstr "Protezione privata" + +#~ msgid "General Settings" +#~ msgstr "Impostazioni generali" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Mostra \"Suggerimento del giorno\" dopo l'avvio" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Se abilitato, all'avvio vengono visualizzati suggerimenti utili." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Volumi di Spurgo: Calcola automaticamente ogni volta che il colore cambia." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Se abilitato, calcola automaticamente ogni volta che il colore cambia." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Volumi di Spurgo: calcola automaticamente ogni volta che il filamento " +#~ "cambia." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Se abilitato, calcola automaticamente ogni volta che il filamento cambia" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Disposizione automatica del piatto dopo la clonazione dell'oggetto" + +#~ msgid "Network" +#~ msgstr "Rete" + +#~ msgid "User Sync" +#~ msgstr "Sincronizzazione utente" + +#~ msgid "System Sync" +#~ msgstr "Sincronizzazione sistema" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Associa gli URL ad Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "ogni" + +#~ msgid "Downloads" +#~ msgstr "Scaricati" + +#~ msgid "Dark Mode" +#~ msgstr "Modalità scura" + +#~ msgid "Home page and daily tips" +#~ msgstr "Pagina iniziale e suggerimenti quotidiani" + +#~ msgid "Show home page on startup" +#~ msgstr "Mostra pagina iniziale all'avvio" + +#~ msgid "Please choose the filament color" +#~ msgstr "Si prega di scegliere il colore del filamento" + +#~ msgid "Send print job to" +#~ msgstr "Invia stampa a" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Il filamento %s supera il numero di slot AMS. Aggiorna il firmware della " +#~ "stampante per supportare l'assegnazione degli slot AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Il filamento supera il numero di slot AMS. Aggiorna il firmware della " +#~ "stampante per supportare l'assegnazione degli slot AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Sono stati assegnati i filamenti negli slot AMS. Puoi cliccare su un " +#~ "filamento qui sopra per cambiare la sua assegnazione nello slot AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Fai clic su ciascun filamento in alto per specificare lo slot di " +#~ "assegnazione AMS prima di inviare l'attività di stampa" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Il firmware della stampante supporta solo l'assegnazione sequenziale del " +#~ "filamento => slot AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "È necessario inserire una scheda SD prima di stampare." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "È necessario inserire una scheda SD per registrare un timelapse." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "ugello memorizzato: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Il diametro dell'ugello nel file di elaborazione non è coerente con " +#~ "l'ugello savato. Se di recente hai sostituito l'ugello, vai su " +#~ "Dispositivo > Parti Stampante per modificare le impostazioni." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "La stampa di materiale ad alta temperatura (materiale %s) con %s può " +#~ "causare danni all'ugello" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Collegamento alla stampante. Impossibile annullare durante il processo di " +#~ "connessione." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Precauzioni per l'uso! La calibrazione del flusso sul piatto PEI con " +#~ "superficie ruvida Bambu può fallire a causa della superficie irregolare." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Calibrazione automatica del flusso tramite Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Invia a scheda SD stampante" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "È necessario inserire una scheda SD prima di inviare il G-code alla " +#~ "scheda SD della stampante." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "" +#~ "La stampante non supporta l'invio del G-code alla scheda SD della " +#~ "stampante." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Il conteggio dei colori dovrebbe essere nell'intervallo [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Colori filamento attuale:" + +#~ msgid "Quick set:" +#~ msgstr "Configurazione rapida:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Aggiungi un estrusore consumabile dopo gli estrusori esistenti." + +#~ msgid "Cluster colors" +#~ msgstr "Gruppo colori" + +#~ msgid "Map Filament" +#~ msgstr "Assegna Filamento" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Nota: il colore è stato selezionato, puoi scegliere OK \n" +#~ "per continuare o regolarlo manualmente." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Attenzione: il numero di estrusori nuovi \n" +#~ "e attuali supera 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Calcolo automatico" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca ricalcolerà i volumi di spurgo ogni volta che viene cambiato il " +#~ "colore del filamento. È possibile disabilitare il calcolo automatico in " +#~ "Snapmaker Orca > Preferenze" + +#~ msgid "unloaded" +#~ msgstr "scaricato" + +#~ msgid "loaded" +#~ msgstr "caricato" + +#~ msgid "Filament #" +#~ msgstr "Filamento #" + +#~ msgid "From" +#~ msgstr "Da" + +#~ msgid "To" +#~ msgstr "A" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Riprendi Stampa (difetti accettabili)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Riprendi Stampa (problema risolto)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Passaggio 1. Verifica che Snapmaker Orca e la stampante siano nella stessa " +#~ "LAN." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Passaggio 2. Se l'IP e il codice di accesso indicati di seguito sono " +#~ "diversi dai valori effettivi sulla stampante, correggerli." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Passaggio 3. Ottenere il numero di serie della stampante; solitamente si " +#~ "trova nelleinformazioni del dispositivo sullo schermo della stampante." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " è troppo vicino agli altri; potrebbero verificarsi delle collisioni " +#~ "durante la stampa." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Non è possibile stampare insieme più filamenti con grandi differenze di " +#~ "temperatura, altrimenti l'estrusore e l'ugello potrebbero bloccarsi o " +#~ "danneggiarsi durante la stampa." + +#~ msgid "Ironing angle" +#~ msgstr "Angolo di stiratura" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Indica l'angolo a cui viene eseguita la stiratura. Un numero negativo " +#~ "disabilita questa funzione e utilizza il metodo predefinito." + +#~ msgid "Remove small overhangs" +#~ msgstr "Rimuovi piccole sporgenze" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Rimuove le piccole sporgenze che eventualmente non necessitano di " +#~ "supporti." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Verrà salvato solo uno dei risultati con lo stesso nome. Sei sicuro di " +#~ "voler sostituire gli altri risultati?" + +#~ msgid "External Spool" +#~ msgstr "Bobina esterna" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Immettere valori validi:\n" +#~ "Temperatura iniziale: <= 350\n" +#~ "Temperatura finale: >= 170\n" +#~ "Temperatura iniziale > Temperatura finale + 5" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "La stampante o il modello personalizzato non è stato immesso, Si prega di " +#~ "inserirli." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "profilo ugello: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Il diametro dell'ugello nel profilo non è coerente con il diametro di " +#~ "quello memorizzato. Hai cambiato l'ugello ultimamente?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*La stampa del materiale %s con %s può causare danni all'ugello" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Migliora la precisione del guscio regolando la spaziatura delle pareti " +#~ "esterne. Questo migliora anche l'uniformità degli strati." + +#~ msgid "Enable filament ramming." +#~ msgstr "Abilita modellazione della punta del filamento." + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Rotellina del mouse" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Rotellina del mouse" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Maiusc + Tasto sinistro del mouse" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Maiusc + Invio" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Maiusc + Sposta il mouse verso l'alto o il basso" + +#~ msgid "Left mouse button:" +#~ msgstr "Tasto sinistro del mouse:" + +#~ msgid "Right mouse button:" +#~ msgstr "Tasto destro del mouse:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Maiusc + Tasto sinistro del mouse:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Maiusc + Tasto destro del mouse:" + +#~ msgid "Recent projects" +#~ msgstr "Progetti recenti" + +#~ msgid "Maximum recent projects" +#~ msgstr "Numero massimo di progetti recenti" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Numero massimo di progetti recenti" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Maiusc+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Maiusc+G" + +#~ msgid "Shift+A" +#~ msgstr "Maiusc+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Maiusc+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Freccia qualsiasi" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Tasto sinistro del mouse" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Tasto sinistro del mouse" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+qualsiasi freccia" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+tasto sinistro del mouse" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Tasto sinistro del mouse" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Maiusc+tasto sinistro mouse" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Maiusc+freccia qualsiasi" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Rotellina del mouse" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Rotellina del mouse" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Rotellina del mouse" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Rotellina del mouse" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Maiusc+Rotellina del mouse" + +#~ msgid "Set Position" +#~ msgstr "Imposta posizione" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "" +#~ "Fai clic con il pulsante destro del mouse sull'icona per correggere " +#~ "l'oggetto del modello" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "L'oggetto di destinazione contiene solo una parte e non può essere diviso." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Schema colore" + +#~ msgid "Percent" +#~ msgstr "Percentuale" + +#~ msgid "Used filament" +#~ msgstr "Filamento usato" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Altro..." + +#~ msgid "More calibrations" +#~ msgstr "Più calibrazioni" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Scheda SD" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Nessuna Scheda SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Scheda SD anomala" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Espulsione del dispositivo %s(%s) non riuscita." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Questa opzione può essere modificata in seguito nelle preferenze, in " +#~ "'Comportamento di caricamento'." + +#~ msgid "Invalid number" +#~ msgstr "Numero non valido" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "ugello memorizzato: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Indica la temperatura del piano di stampa quando è installato il Piatto " +#~ "SuperTack a bassa temperatura. Un valore pari a 0 indica che il filamento " +#~ "non è compatibile con la stampa sul Piatto SuperTack a bassa temperatura." + +#~ msgid "Textured Cool plate" +#~ msgstr "Piatto ruvido a bassa temperatura" + +#~ msgid "Ramming settings" +#~ msgstr "Impostazioni modellazione del filamento" + +#~ msgid "Profile dependencies" +#~ msgstr "Dipendenze profilo" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "il pacchetto di configurazione non è compatibile con l'applicazione " +#~ "corrente." + +#~ msgid "Total ramming time" +#~ msgstr "Durata totale modellazione del filamento" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Volume totale di modellazione del filamento" + +#~ msgid "Ramming line width" +#~ msgstr "Larghezza linea di modellazione del filamento" + +#~ msgid "Ramming line spacing" +#~ msgstr "Spaziatura tra linee di modellazione del filamento" + +#~ msgid "Shift+R" +#~ msgstr "Maiusc+R" + +#~ msgid "resume" +#~ msgstr "riprendi" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Modalità classica" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Abilita questa opzione per utilizzare la modalità classica." + +#~ msgid "Compatible machine" +#~ msgstr "Macchina compatibile" + +#~ msgid "Compatible machine condition" +#~ msgstr "Condizione macchina compatibile" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Condizione profili di processo compatibili" + +#~ msgid "Default filament color" +#~ msgstr "Colore predefinito del filamento" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Ruota direzione riempimento solido" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Ruota la direzione del riempimento solido di 90° per ogni strato." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Modello di compensazione del flusso, utilizzato per regolare il flusso " +#~ "per piccole aree di riempimento. Il modello è espresso come una coppia di " +#~ "valori, per riga, separati da una virgola, cioè la lunghezza di " +#~ "estrusione e i fattori di correzione del flusso, nel seguente formato: " +#~ "\"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "L'altezza massima degli strati stampabile per l'estrusore. Viene " +#~ "utilizzata per limitare l'altezza massima degli strati quando è abilitato " +#~ "Altezza strato adattiva." + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "L'altezza minima degli strati stampabile per l'estrusore. Viene " +#~ "utilizzata per limitare l'altezza minima degli strati quando è abilitato " +#~ "Altezza strato adattiva." + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Ritrai su strato superiore" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Forza una retrazione sullo strato superiore. La disattivazione di questa " +#~ "opzione potrebbe impedire l'intasamento dell'ugello su modelli molto " +#~ "lenti con piccoli movimenti, come la curva di Hilbert." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Indica la quantità di filamento nell'estrusore che viene ritirata per " +#~ "evitare la colatura del materiale durante lunghi spostamenti. Impostalo " +#~ "su 0 per disattivare la retrazione" + +#~ msgid "Speed of retractions." +#~ msgstr "Indica la velocità di retrazione." + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Velocità di ricarica del filamento nell'estrusore dopo una retrazione. " +#~ "Impostando 0, la velocità sarà la stessa della retrazione." + +#~ msgid "Single loop draft shield" +#~ msgstr "Perimetro singolo per scudo protettivo" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Dopo il primo strato, limita i perimetri dello scudo protettivo a una " +#~ "sola parete. Questo è utile a volte per ridurre l'utilizzo del filamento, " +#~ "ma può causare la deformazione/crepa dello scudo protettivo." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Spaziatura delle linee dell'interfaccia. 0 equivale ad un'interfaccia " +#~ "solida." + +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Spessore minimo degli elementi sottili. Gli elementi del modello più " +#~ "sottili di questo valore non verranno stampati, mentre quelli più spessi " +#~ "della dimensione minima verranno ampliati fino alla larghezza minima " +#~ "della parete. Questo valore è espresso come percentuale rispetto al " +#~ "diametro dell'ugello." + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "Carica le impostazioni di processo/macchina aggiornate quando si utilizza " +#~ "Aggiorna." + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "" +#~ "Carica le impostazioni del filamento aggiornate quando si utilizza " +#~ "Aggiorna." + +#~ msgid "Downward machines settings" +#~ msgstr "Impostazioni macchine" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Carica gli ID dei filamenti per ogni oggetto" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "È stata aggiunta la calibrazione automatica per diversi filamenti, " +#~ "completamente automatizzata, e il cui risultato verrà salvato nella " +#~ "stampante per usi futuri. È necessario eseguire la calibrazione solo nei " +#~ "seguenti casi:\n" +#~ "1. Se si introduce un nuovo filamento di marche/modelli diversi o il " +#~ "filamento è umido\n" +#~ "2. Se l'ugello è usurato o è stato sostituito con uno nuovo\n" +#~ "3. Se la velocità volumetrica massima o la temperatura di stampa è stata " +#~ "modificata nell'impostazione del filamento" + +#~ msgid "step: " +#~ msgstr "incrementi: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Carica STL" + +#~ msgid "Load svg" +#~ msgstr "Carica svg" + +#~ msgid "Back Page 1" +#~ msgstr "Ritorna alla pagina 1" + +#~ msgid "Delete Filament" +#~ msgstr "Elimina filamento" + +#~ msgid "Refresh Printers" +#~ msgstr "Aggiorna Stampanti" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta " +#~ "un'altezza dello strato minore, che si traduce in linee di strato quasi " +#~ "invisibili e una qualità di stampa più elevata, ma tempi di stampa più " +#~ "brevi." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "Rispetto al profilo predefinito di un ugello da 0,2 mm, presenta " +#~ "un'altezza dello strato minore, che si traduce in linee di strato sottili " +#~ "e una qualità di stampa più elevata, ma tempi di stampa più brevi." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Presenta un'altezza dello strato elevata, che si traduce in linee di " +#~ "strato molto visibili, scarsa qualità di stampa e tempi di stampa normali." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "Rispetto al profilo predefinito di un ugello da 0,8 mm, presenta " +#~ "un'altezza dello strato maggiore, che si traduce in linee di strato molto " +#~ "visibili e una qualità di stampa molto inferiore, ma in alcuni casi, " +#~ "tempi di stampa più brevi." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "Rispetto al profilo predefinito di un ugello da 0,8 mm, presenta " +#~ "un'altezza dello strato molto maggiore, che si traduce in linee di strato " +#~ "estremamente visibili e una qualità di stampa molto inferiore, ma in " +#~ "alcuni casi, tempi di stampa molto più brevi." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "Rispetto al profilo predefinito di un ugello da 0,8 mm, presenta " +#~ "un'altezza dello strato minore, che si traduce in linee di strato più " +#~ "sottili, ma comunque evidenti, e una qualità di stampa leggermente " +#~ "superiore ma, in alcuni casi, tempi di stampa più lunghi." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "La connessione a Flashforge funziona correttamente." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Impossibile connettersi a Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Imposta il tipo di tesa su \"Dipinto\"" + +#~ msgid "" +#~ "Snapmaker Orca will terminate because of running out of memory. It may be a " +#~ "bug. It will be appreciated if you report the issue to our team." +#~ msgstr "" +#~ "Snapmaker Orca ha esaurito la memoria e verrà chiuso. Questo potrebbe essere " +#~ "un bug. Si prega di segnalare questo errore al supporto tecnico." + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Abbiamo aggiunto uno stile sperimentale \"Albero Sottile\" che presenta " +#~ "un volume di supporto più piccolo ma una resistenza più debole.\n" +#~ "Si consiglia di utilizzarlo con: 0 strati di interfaccia, 0 distanza " +#~ "superiore, 2 pareti." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Per gli stili \"Albero spesso\" e \"Albero ibrido\", si consigliano le " +#~ "seguenti impostazioni: almeno 2 strati di interfaccia, distanza z " +#~ "superiore di almeno 0,1 mm o utilizzo di materiali di supporto " +#~ "sull'interfaccia." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Diametro diramazioni con pareti doppie" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Le ramificazioni con un'area superiore all'area di un cerchio di questo " +#~ "diametro verranno stampate con pareti doppie per garantire la stabilità. " +#~ "Imposta questo valore a zero per non avere pareti doppie." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "" +#~ "Questa impostazione specifica il numero di pareti intorno al supporto" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Supporto: generazione percorso utensile allo strato %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Supporto: rilevamento sporgenze" + +#~ msgid "Support: propagate branches" +#~ msgstr "Supporto: propagazione rami" + +#~ msgid "Support: draw polygons" +#~ msgstr "Supporto: disegno poligoni" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Supporto: generazione percorso utensile" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Supporto: generazione poligoni allo strato %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Supporto: correzione dei buchi allo strato %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Supporto: propagazione rami allo strato %d" + +#~ msgid "Stopped." +#~ msgstr "Interrotto." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Connessione non riuscita [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "" +#~ "Inizializzazione fallita (la connessione del dispositivo non è pronta)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Inizializzazione fallita (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Connessione LAN fallita (invio del file di stampa)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Step 1, conferma che Snapmaker Orca e la tua stampante siano sulla stessa " +#~ "LAN." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Step 2, se l'IP e il codice di accesso riportati di seguito sono diversi " +#~ "dai valori effettivi sulla stampante, correggili." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Passaggio 3: eseguire il ping dell'indirizzo IP per verificare la perdita " +#~ "di pacchetti e la latenza." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Forzare il raffreddamento per sbalzi e ponti" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Abilita questa opzione per ottimizzare la velocità della ventola di " +#~ "raffreddamento degli oggetti per sporgenze e ponti per ottenere un " +#~ "raffreddamento migliore." + +#~ msgid "Fan speed for overhang" +#~ msgstr "Velocità della ventola per le sporgenze" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Force part cooling fan to be this speed when printing bridges or overhang " +#~ "walls which have a large overhang degree. Forcing cooling for overhangs " +#~ "and bridges can achieve better quality for these parts." + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Soglia di sbalzo per il raffreddamento" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Forza la ventola di raffreddamento a una velocità specifica quando il " +#~ "grado di sporgenza della parte stampata supera questo valore. Questo " +#~ "valore è espresso in percentuale e indica la larghezza della linea senza " +#~ "il supporto dei layer. 0%% significa forzare il raffreddamento per tutta " +#~ "la parete esterna, indipendentemente dal grado di sporgenza." + +#~ msgid "Bridge infill direction" +#~ msgstr "Direzione di riempimento del ponte" + +#~ msgid "Bridge density" +#~ msgstr "Densità del bridge" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Densità di ponti esterni. 100% significa solido ponte. L'impostazione " +#~ "predefinita è al 100%." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Migliora la precisione del guscio regolando lo spaziamento della parete " +#~ "esterna. Ciò migliora anche la coerenza dello strato.\n" +#~ "Nota: Questa impostazione avrà effetto solo se la sequenza della parete è " +#~ "configurata su Interno-Esterno." + +#~ msgid "Thick bridges" +#~ msgstr "Bridge spessi" + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Questa velocità della ventola viene applicata durante tutte le interfacce " +#~ "di supporto, per essere in grado di indebolire il loro legame con " +#~ "un'elevata velocità della ventola.\n" +#~ "Impostare su -1 per disabilitare questa sostituzione.\n" +#~ "Può essere sovrascritto solo da disable_fan_first_layers." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "La velocità di stampa minima a cui la stampante rallenterà per tentare di " +#~ "mantenere il tempo minimo dello strato sopra, quando è abilitato il " +#~ "rallentamento per un migliore raffreddamento dello strato." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "MaiuscTasto sinistro del mouse" + +#~ msgid "Unselect" +#~ msgstr "Deseleziona" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Ridimensiona" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Applicazione dell'ascensore Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-hop in fase retrazione" + +#~ msgid "Reverse on odd" +#~ msgstr "Retromarcia su dispari" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Estrudere i perimetri che hanno una parte su una sporgenza in direzione " +#~ "inversa su layer dispari. Questo schema alternato può migliorare " +#~ "drasticamente gli strapiombi ripidi.\n" +#~ "\n" +#~ "Questa impostazione può anche contribuire a ridurre la deformazione della " +#~ "parte grazie alla riduzione delle sollecitazioni nelle pareti della parte." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Applicare la logica dei perimetri inversi solo ai perimetri interni.\n" +#~ "\n" +#~ "Questa impostazione riduce notevolmente le sollecitazioni delle parti " +#~ "poiché ora sono distribuite in direzioni alternate. Ciò dovrebbe ridurre " +#~ "la deformazione delle parti mantenendo al contempo la qualità delle " +#~ "pareti esterne. Questa caratteristica può essere molto utile per " +#~ "materiali soggetti a deformazione, come ABS/ASA, e anche per filamenti " +#~ "elastici, come TPU e Silk PLA. Può anche aiutare a ridurre la " +#~ "deformazione sulle regioni fluttuanti sui supporti.\n" +#~ "\n" +#~ "Affinché questa impostazione sia la più efficace, si consiglia di " +#~ "impostare la soglia inversa su 0 in modo che tutte le pareti interne " +#~ "vengano stampate in direzioni alternate sugli strati dispari, " +#~ "indipendentemente dal loro grado di sporgenza." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Numero di mm di sbalzo necessario affinché l'inversione sia considerata " +#~ "utile. Può essere un % o della larghezza del perimetro.\n" +#~ "Il valore 0 abilita l'inversione su tutti i livelli dispari a prescindere." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "La direzione in cui vengono estrusi i loop del muro quando si guarda " +#~ "verso il basso dall'alto.\n" +#~ "\n" +#~ "Per impostazione predefinita, tutti i muri vengono estrusi in senso " +#~ "antiorario, a meno che non sia abilitata l'opzione Inverti su dispari. " +#~ "Impostando questa opzione su qualsiasi opzione diversa da Auto si forzerà " +#~ "la direzione del muro indipendentemente dall'inversione su dispari.\n" +#~ "\n" +#~ "Questa opzione sarà disabilitata se è abilitata la modalità vaso spiral." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Durante la stampa per oggetto, il Nozzle potrebbe urtare lo skirt.\n" +#~ "Quindi, ripristina il layer skirt su 1 per evitare collisioni." + +#~ msgid "Limited" +#~ msgstr "Limitato" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Regolare questo valore per evitare la stampa di pareti corte e non " +#~ "chiuse, che potrebbero aumentare il tempo di stampa. Valori più alti " +#~ "rimuovono muri più numerosi e più lunghi.\n" +#~ "\n" +#~ "NOTA: le superfici inferiore e superiore non saranno influenzate da " +#~ "questo valore per evitare spazi visivi sul lato esterno del modello. " +#~ "Regola \"Soglia di una parete\" nelle impostazioni avanzate di seguito " +#~ "per regolare la sensibilità di ciò che è considerato una superficie " +#~ "superiore. 'Una soglia muro' è visibile solo se questa impostazione è " +#~ "impostata al di sopra del valore predefinito di 0,5 o se è abilitata " +#~ "l'opzione Superfici superiori a parete singola." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "Non filtrare i piccoli ponti interni (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Questa opzione può contribuire a ridurre l'effetto 'pillowing' sulle " +#~ "superfici superiori nei modelli fortemente inclinati o curvi.\n" +#~ "\n" +#~ "\n" +#~ "Per impostazione predefinita, i piccoli bridge interni vengono filtrati e " +#~ "il riempimento solido interno viene stampato direttamente sul riempimento." +#~ "Questo metodo funziona bene nella maggior parte dei casi, velocizzando la " +#~ "stampa senza compromettere troppo la qualità della superficie superiore.\n" +#~ "\n" +#~ "Tuttavia, in modelli fortemente inclinati o curvi, soprattutto se si " +#~ "utilizza una densità di riempimento troppo bassa, potrebbe comportare " +#~ "l'arricciamento del riempimento solido non supportato, causando il " +#~ "pillowing.\n" +#~ "\n" +#~ "Abilitando questa opzione, lo strato del bridge interno verrà stampato su " +#~ "un riempimento solido interno leggermente non supportato. Le opzioni " +#~ "sottostanti controllano la quantità di filtraggio, ovvero la quantità di " +#~ "bridge interni creati.\n" +#~ "\n" +#~ "Disabilitato - Disabilita questa opzione. Indica il comportamento " +#~ "predefinito e funziona bene nella maggior parte dei casi.\n" +#~ "\n" +#~ "Filtro limitato - Crea bridge interni su superfici fortemente inclinate, " +#~ "evitando di creare bridge interni non necessari. Funziona bene per la " +#~ "maggior parte dei modelli difficili.\n" +#~ "\n" +#~ "Nessun filtraggio - Crea bridge interni su ogni potenziale sporgenza " +#~ "interna. Questa opzione è utile per i modelli con superficie superiore " +#~ "fortemente inclinata. Tuttavia, nella maggior parte dei casi crea troppi " +#~ "bridge non necessari." + +#~ msgid "Shrinkage" +#~ msgstr "Restringimento" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Abilita il riempimento degli spazi vuoti per le superfici selezionate. La " +#~ "lunghezza minima degli spazi vuoti che verranno riempiti può essere " +#~ "controllata dall'opzione Filtra piccoli spazi vuoti di seguito.\n" +#~ "\n" +#~ "Opzioni:\n" +#~ "1. Ovunque: applica il riempimento degli spazi vuoti alle superfici " +#~ "solide superiori, inferiori e interne\n" +#~ "2. Superfici superiore e inferiore: applica il riempimento degli spazi " +#~ "vuoti solo alle superfici superiore e inferiore\n" +#~ "3. Da nessuna parte: disabilita il riempimento degli spazi vuoti\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Diminuire leggermente questo valore (ad esempio 0.9) per ridurre la " +#~ "quantità di materiale per il ponte e migliorare l'abbassamento dello " +#~ "stesso" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Questo valore governa lo spessore dello strato del bridge interno. Questo " +#~ "è il primo strato sopra il riempimento. Riduci leggermente questo valore " +#~ "(ad esempio 0.9) per migliorare la qualità della superficie sopra il " +#~ "riempimento." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Questo fattore influisce sulla quantità di materiale per il riempimento " +#~ "solido superiore. Puoi diminuirlo leggermente per avere una finitura " +#~ "superficiale liscia" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Questo fattore influisce sulla quantità di materiale per il riempimento " +#~ "solido inferiore" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Attivare questa opzione per rallentare la stampa nelle aree in cui " +#~ "possono esistere potenziali perimetri arricciati" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Indica la velocità per i bridge e le pareti completamente a sbalzo." + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Velocità del ponte interno. Se il valore è espresso in percentuale, verrà " +#~ "calcolato in base al bridge_speed. Il valore predefinito è 150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tempo di caricamento del nuovo filamento quando si cambia filamento, solo " +#~ "a fini statistici." + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tempo di scarico vecchio filamento quando si cambia filamento, solo a " +#~ "fini statistici." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) " +#~ "per il caricamento del nuovo filamento durante il cambio strumento " +#~ "(quando viene eseguito il T code). Questa durata viene aggiunta alla " +#~ "stima del tempo totale di stampa del G-code." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) " +#~ "per lo scaricamento del nuovo filamento durante il cambio strumento " +#~ "(quando viene eseguito il T code). Questa durata viene aggiunta alla " +#~ "stima del tempo totale di stampa del G-code." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtra gli spazi più piccoli della soglia specificata" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Abilitare questa opzione per il controllo della temperatura della camera. " +#~ "Un comando M191 verrà aggiunto prima di \"machine_start_gcode\"\n" +#~ "Comandi G-code: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Una temperatura della camera più elevata può aiutare a sopprimere o " +#~ "ridurre la deformazione e potenzialmente portare a una maggiore forza di " +#~ "adesione tra gli strati per materiali ad alta temperatura come ABS, ASA, " +#~ "PC, PA e così via. Allo stesso tempo, la filtrazione dell'aria di ABS e " +#~ "ASA peggiorerà. Mentre per PLA, PETG, TPU, PVA e altri materiali a bassa " +#~ "temperatura, la temperatura effettiva della camera non dovrebbe essere " +#~ "elevata per evitare intasamenti, quindi 0 che sta per spegnimento è " +#~ "altamente raccomandato" + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Diametri degli ugelli diversi e diametri di filamento diversi non sono " +#~ "consentiti quando la torre Prime è abilitata." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "La prevenzione delle perdite (ooze prevention) attualmente non è " +#~ "supportata quando è abilitata la torre di priming." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Profondità di incastro di una regione segmentata. Zero disabilita questa " +#~ "funzione." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Estrusore torre di pulitura" #~ msgid "Please input a valid value (K in 0~0.3)" #~ msgstr "Immettere un valore valido (K in 0~0.3)" @@ -16988,18 +22815,12 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Si prega di trovare il cornor con il perfetto grado di estrusione" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " #~ "first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " #~ "push out the printed walls where it is attached to them, resulting in a " #~ "worse external surface finish. It can also cause the infill to shine " #~ "through the external surfaces of the part." @@ -17015,16 +22836,13 @@ msgstr "" #~ "anche far brillare il riempimento attraverso le superfici esterne della " #~ "parte." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca è basato su BambuStudio di Bambulab, che è di PrusaSlicer di " -#~ "Prusa Research. PrusaSlicer è di Slic3r di Alessandro Ranellucci e della " +#~ "Prusa Research. PrusaSlicer è di Slic3r di Alessandro Ranellucci e della " #~ "comunità RepRap" #~ msgid "Export &Configs" @@ -17055,37 +22873,6 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Scarica Filamento" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Seleziona uno slot AMS, premi \"Carica\" o \"Scarica\" per caricare o " -#~ "scaricare automaticamente il filamento." - -#~ msgid "MC" -#~ msgstr "MC" - -#~ msgid "MainBoard" -#~ msgstr "MainBoard" - -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- °C" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "active" #~ msgstr "attivo" @@ -17127,7 +22914,7 @@ msgstr "" #~ "precisione." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Nota: se durante la stampa viene inserito un nuovo filamento, l'AMS non " @@ -17143,8 +22930,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Inizializzazione fallita (Nessun dispositivo fotocamera)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Stampante in fase di caricamento; attendi il completamento del " #~ "caricamento." @@ -17169,18 +22955,14 @@ msgstr "" #~ msgid "Load failed [%d]!" #~ msgstr "Caricamento non riuscito [%d]!" -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - #, c-format, boost-format #~ msgid "Load failed [%d]" #~ msgstr "Caricamento non riuscito [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "Impossibile recuperare le informazioni del modello dalla stampante." -#~ msgid "Failed to parse model infomations." +#~ msgid "Failed to parse model informations." #~ msgstr "Impossibile analizzare le informazioni del modello." #~ msgid "Connection lost. Please retry." @@ -17191,24 +22973,21 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Sono state modificate alcune impostazioni del preset \"%1%\". \n" +#~ "Sono state modificate alcune impostazioni del preset \"%1%\".\n" #~ "Vuoi mantenere le impostazioni (nuovo valore) dopo aver cambiato i preset?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Sono stati modificati alcuni preset preimpostati. \n" +#~ "Sono stati modificati alcuni preset preimpostati.\n" #~ "Vuoi mantenere le impostazioni (nuovo valore) dopo aver cambiato i preset?" -#~ msgid " ℃" -#~ msgstr " °C" - #~ msgid "" #~ "Please go to filament setting to edit your presets if you need.\n" #~ "Please note that nozzle temperature, hot bed temperature, and maximum " @@ -17216,7 +22995,7 @@ msgstr "" #~ "set them carefully." #~ msgstr "" #~ "Vai alle impostazioni del filamento per modificare le tue impostazioni " -#~ "predefinite se necessario. \n" +#~ "predefinite se necessario.\n" #~ "Nota che la temperatura della ugello, la temperatura del piano riscaldato " #~ "e la velocità volumetrica massima hanno un impatto significativo sulla " #~ "qualità di stampa. Impostale con attenzione." @@ -17224,15 +23003,6 @@ msgstr "" #~ msgid "Studio Version:" #~ msgstr "Versione Studio:" -#~ msgid "Test BambuLab" -#~ msgstr "Test BambuLab" - -#~ msgid "Test BambuLab:" -#~ msgstr "Test BambuLab:" - -#~ msgid "Test HTTP" -#~ msgstr "Test HTTP" - #~ msgid "Test HTTP Service:" #~ msgstr "Test servizio HTTP:" @@ -17254,12 +23024,6 @@ msgstr "" #~ msgid "Test Storage Download:" #~ msgstr "Test Download dell'archiviazione:" -#~ msgid "Test plugin download" -#~ msgstr "Test plugin download" - -#~ msgid "Test Plugin Download:" -#~ msgstr "Test Plugin Download:" - #~ msgid "Test Storage Upload" #~ msgstr "Test Caricamento dell'archiviazione" @@ -17271,12 +23035,12 @@ msgstr "" #~ "disattivazione dell'opzione Garantisci spessore verticale del guscio" #~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " #~ "wall\n" -#~ "No - Dont use alternate extra wall" +#~ "No - Don't use alternate extra wall" #~ msgstr "" -#~ "Modificare automaticamente queste impostazioni? \n" +#~ "Modificare automaticamente queste impostazioni?\n" #~ "Sì - Disabilita Garantisci spessore verticale del guscio e abilita Parete " #~ "Aggiuntiva Alternativa\n" #~ "No - Non utilizzare una Parete Aggiuntiva Alternativa" @@ -17309,9 +23073,6 @@ msgstr "" #~ "genererebbe uno strato superiore troppo sottile e dovrebbe essere " #~ "disabilitata." -#~ msgid " " -#~ msgstr " " - #~ msgid "Text-Rotate" #~ msgstr "Ruota testo" @@ -17324,13 +23085,6 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Pacchetto di configurazione aggiornato a " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "Migliora la precisione del guscio regolando la spaziatura delle pareti " -#~ "esterne. Questo migliora anche la consistenza degli strati." - #~ msgid "" #~ "The minimum printing speed for the filament when slow down for better " #~ "layer cooling is enabled, when printing overhangs and when feature speeds " @@ -17341,38 +23095,14 @@ msgstr "" #~ "sporgenze di stampa e quando le velocità delle caratteristiche non sono " #~ "specificate esplicitamente." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Nessun layer sparso (SPERIMENTALE)" - -#~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" -#~ msgstr "" -#~ "Rinomineremo le impostazioni predefinite come \"Tipo di fornitore seriale " -#~ "@printer selezionato\". \n" -#~ " Per aggiungere impostazioni predefinite per altre stampanti, vai alla " -#~ "selezione della stampante." - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "La configurazione non può essere caricata." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "Il 3mf è stato generato da una vecchia versione di Snapmaker Orca, " -#~ "caricando \n" -#~ "solo i dati geometrici." - -#~ msgid "wiki" -#~ msgstr "" -#~ "Darò i comandi per far funzionare EPEL su RHEL 8, ma se sei su RHEL 6 o " -#~ "RHEL 7 puoi trovare quelle istruzioni sul wiki." - #~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " +#~ "Relative extrusion is recommended when using \"label_objects\" option. " +#~ "Some extruders work better with this option unchecked (absolute extrusion " #~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" +#~ "enabled on BambuLab printers. Default is checked." #~ msgstr "" #~ "L'estrusione relativa è consigliata quando si utilizza l'opzione " #~ "\"label_objects\". Alcuni estrusori funzionano meglio con questa opzione " @@ -17380,9 +23110,6 @@ msgstr "" #~ "compatibile solo con la modalità relativa. È sempre abilitato sulle " #~ "stampanti BambuLab. Il valore predefinito è selezionato" -#~ msgid "Movement:" -#~ msgstr "Movement:" - #~ msgid "Movement" #~ msgstr "Movimento" @@ -17392,9 +23119,6 @@ msgstr "" #~ msgid "Depth ratio" #~ msgstr "Rapporto di profondità" -#~ msgid "Prizm" -#~ msgstr "Prizm" - #~ msgid "connector is out of cut contour" #~ msgstr "Connettore fuori dal contorno" @@ -17408,7 +23132,7 @@ msgstr "" #~ msgstr "I connettori devono trovarsi sulla superficie dell'oggetto." #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" #~ "Stato non valido.\n" @@ -17418,7 +23142,7 @@ msgstr "" #~ msgstr "Ricalcola" #~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " +#~ "Orca recalculates your flushing volumes every time the filament colors " #~ "change. You can change this behavior in Preferences." #~ msgstr "" #~ "Orca ricalcola i volumi di risciacquo ogni volta che i colori del " @@ -17433,7 +23157,7 @@ msgstr "" #~ "stampa. Controlla se la rete funziona correttamente e invia nuovamente la " #~ "stampa." -#~ msgid "The beginning of the vendor can not be a number. Please re-enter." +#~ msgid "The beginning of the vendor cannot be a number. Please re-enter." #~ msgstr "" #~ "L'inizio del fornitore non può essere un numero. Si prega di inserire di " #~ "nuovo." @@ -17442,7 +23166,7 @@ msgstr "" #~ msgstr "Modifica testo" #~ msgid "Error! Unable to create thread!" -#~ msgstr "Errore. Impossibile creare il processo." +#~ msgstr "Errore! Impossibile creare il processo!" #~ msgid "Exception" #~ msgstr "Eccezione" @@ -17483,7 +23207,7 @@ msgstr "" #~ "Discribe how long the nozzle will move along the last path when retracting" #~ msgstr "" #~ "Descrive per quanto tempo il nozzle si muoverà lungo l'ultimo percorso " -#~ "mentre si ritrae." +#~ "durante la retrazione." #~ msgid "" #~ "Simplify Model\n" @@ -17525,16 +23249,16 @@ msgstr "" #~ "Sì - passa automaticamente alla trama rettilinea\n" #~ "No - ripristina automaticamente la densità al valore predefinito non 100%" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "" -#~ "Riscaldare il nozzle a una temperatura superiore a 170 gradi prima di " +#~ "Riscaldare il nozzle a una temperatura superiore a 170°C prima di " #~ "caricare il filamento." -#~ msgid "Show g-code window" -#~ msgstr "Mostra la finestra del codice g" +#~ msgid "Show G-code window" +#~ msgstr "Mostra la finestra del G-code" -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "Se abilitato, verrà visualizzata la finestra del codice g." +#~ msgid "If enabled, G-code window will be displayed." +#~ msgstr "Se abilitato, verrà visualizzata la finestra del G-code." #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" @@ -17573,11 +23297,8 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Esporta tutti gli oggetti come STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "Il 3mf non è compatibile, carica solo i dati della geometria!" - -#~ msgid "Incompatible 3mf" -#~ msgstr "Incompatible 3mf" +#~ msgid "The 3MF is not compatible, load geometry data only!" +#~ msgstr "Il 3MF non è compatibile, carica solo i dati della geometria!" #~ msgid "Add/Remove printers" #~ msgstr "Aggiungi/Rimuovi stampanti" @@ -17631,167 +23352,11 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "interno-esterno-interno/riempimento" -#, c-format, boost-format -#~ msgid "%%" -#~ msgstr "%%" - -#~ msgid "Export 3MF" -#~ msgstr "Esporta 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Questo esporta il progetto come file 3mf." - -#~ msgid "Export slicing data" -#~ msgstr "Esporta dati elaborati" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Esporta dati elaborati in una cartella" - -#~ msgid "Load slicing data" -#~ msgstr "Carica dati di slicing" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Carica i dati di slicing nella cache dalla directory" - -#~ msgid "Export STL" -#~ msgstr "Esporta STL" - #~ msgid "Export the objects as multiple STL." -#~ msgstr "Esportare gli oggetti come STL multipli." - -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Slicing dei piatti: 0-tutti i piatti, i-piatto i, altri-invalidi" - -#~ msgid "Show command help." -#~ msgstr "Mostra la guida ai comandi." - -#~ msgid "UpToDate" -#~ msgstr "Aggiornato" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Aggiorna valori di configurazione dei 3mf ai più recenti." - -#~ msgid "Load default filaments" -#~ msgstr "Carica filamenti predefiniti" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Carica il primo filamento come predefinito per quelli non caricati" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "numero massimo di triangoli per piatto da elaborare" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "Tempo massimo di slicing per piatto in secondi" - -#~ msgid "Normative check" -#~ msgstr "Controllo normativo" - -#~ msgid "Check the normative items." -#~ msgstr "Controlla gli articoli normativi." - -#~ msgid "Output Model Info" -#~ msgstr "Info Modello di output" - -#~ msgid "Output the model's information." -#~ msgstr "Questo produce le informazioni del modello." - -#~ msgid "Export Settings" -#~ msgstr "Esporta impostazioni" - -#~ msgid "Export settings to a file." -#~ msgstr "Questo esporta le impostazioni in un file." - -#~ msgid "Send progress to pipe" -#~ msgstr "Inviare l'avanzamento al pipe" - -#~ msgid "Send progress to pipe." -#~ msgstr "Inviare l'avanzamento al pipe" - -#~ msgid "Arrange Options" -#~ msgstr "Opzioni disposizione" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Opzioni di disposizione: 0-disabilita, 1-abilita, altro-auto" - -#~ msgid "Repetions count" -#~ msgstr "Conteggio delle ripetizioni" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Numero di ripetizioni dell'intero modello" - -#~ msgid "Convert Unit" -#~ msgstr "Converti unità" - -#~ msgid "Convert the units of model" -#~ msgstr "Converti le unità del modello" - -#~ msgid "Rotate around X" -#~ msgstr "Ruota attorno ad X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "Angolo di rotazione attorno all'asse X in gradi." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Ridimensiona il modello in base a un fattore float" - -#~ msgid "Load General Settings" -#~ msgstr "Carica impostazioni generali" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Carica le impostazioni di processo/macchina dal file specificato" - -#~ msgid "Load Filament Settings" -#~ msgstr "Carica impostazioni filamento" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "" -#~ "Carica le impostazioni del filamento dall'elenco di file specificato" - -#~ msgid "Skip Objects" -#~ msgstr "Salta oggetti" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Salta alcuni oggetti in questa stampa" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "" -#~ "Caricare le impostazioni di processo/macchina aggiornate quando si " -#~ "utilizza UptoDate" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "Caricare le impostazioni di processo/macchina aggiornate dal file " -#~ "specificato quando si utilizza UptoDate" - -#~ msgid "Output directory" -#~ msgstr "Output directory" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Questa è la cartella di destinazione per i file esportati." - -#~ msgid "Debug level" -#~ msgstr "Livello di debug" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ msgstr "Esporta gli oggetti come STL multipli." #, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "Il preset selezionato: %1% non è stato trovato." #~ msgid "" @@ -17808,34 +23373,19 @@ msgstr "" #~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " #~ "slicing problems?" #~ msgstr "" -#~ "Correggi Modello\n" -#~ "Sapevi che puoi correggere un modello 3D danneggiato per evitare molti " +#~ "Ripara Modello\n" +#~ "Sapevi che puoi riparare un modello 3D danneggiato per evitare molti " #~ "problemi di slicing?" -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "Quando è necessario stampare con lo sportello della stampante aperto\n" -#~ "L'apertura dello sportello della stampante può ridurre la probabilità di " -#~ "intasamento dell'estrusore/hotend quando si stampa un filamento a " -#~ "temperatura inferiore con una temperatura dell'involucro più elevata. " -#~ "Maggiori informazioni su questo nel Wiki." - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Integrato" #~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Mostra i modelli online selezionati dallo staff nella home page" +#~ msgstr "Mostra i modelli online selezionati dallo staff nella home page" #~ msgid "Online Models" #~ msgstr "Modelli Online" -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "The minimum printing speed when slowing down for cooling." - #~ msgid "" #~ "The bed temperature exceeds filament's vitrification temperature. Please " #~ "open the front door of printer before printing to avoid nozzle clog." @@ -17844,31 +23394,6 @@ msgstr "" #~ "filamento. Aprire lo sportello anteriore della stampante prima di " #~ "stampare per evitare l'intasamento del nozzle." -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "Temperature of vitrification" - -#~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" -#~ msgstr "" -#~ "Material becomes soft at this temperature. Thus, the heat bed cannot be " -#~ "hotter than this temperature." - -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "Enable this option if the machine has an auxiliary part cooling fan" - -#~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" -#~ msgstr "" -#~ "This is the speed of auxiliary part cooling fan. The auxiliary fan will " -#~ "run at this speed during printing except for during the first several " -#~ "layers which may be set to have no part cooling." - -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "Empty layers around bottom are replaced by nearest normal layers." - #~ msgid "The model has too many empty layers." #~ msgstr "Il modello ha troppi layers vuoti." @@ -17879,16 +23404,16 @@ msgstr "" #~ msgstr "Calibrazione estrusione" #~ msgid "Push new filament into the extruder" -#~ msgstr "Inserisco il nuovo filamento nell'estrusore" +#~ msgstr "Inserisci il nuovo filamento nell'estrusore" #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "The bed temperature of other layers is lower than the bed temperature of " -#~ "the first layer by more than %d degrees centigrade.\n" +#~ "the first layer by more than %d degrees Celsius.\n" #~ "This may cause models to break free from the build plate during printing." #~ msgid "" @@ -17919,21 +23444,12 @@ msgstr "" #~ msgid "Score" #~ msgstr "Punteggio" -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "Bambu High Temperature Plate" - #~ msgid "Can't connect to the printer" #~ msgstr "Impossibile connettersi alla stampante" -#~ msgid "Recommended temperature range" -#~ msgstr "Recommended temperature range" - -#~ msgid "High Temp Plate" -#~ msgstr "High Temp Plate" - #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "This is the bed temperature when the high temperature plate is installed. " #~ "A value of 0 means the filament does not support printing on the High " @@ -17959,9 +23475,6 @@ msgstr "" #~ "mentre lo stile ibrido creerà una struttura simile a quella dei sostegni " #~ "normali sotto grandi sporgenze piatte." -#~ msgid "Bed temperature difference" -#~ msgstr "Bed temperature difference" - #~ msgid "" #~ "Do not recommend bed temperature of other layer to be lower than initial " #~ "layer for more than this threshold. Too low bed temperature of other " @@ -17970,7 +23483,4 @@ msgstr "" #~ "Non è consigliabile che la temperatura del piano degli altri layer sia " #~ "inferiore a quella del primo layer di oltre questa soglia. Una " #~ "temperatura del piano troppo bassa degli altri layer può causare il " -#~ "distacco dell'oggetto dal piatto." - -#~ msgid "Orient the model" -#~ msgstr "Orient the model" +#~ "distacco dell'oggetto dal piatto." \ No newline at end of file diff --git a/localization/i18n/ja/Snapmaker_Orca_ja.po b/localization/i18n/ja/Snapmaker_Orca_ja.po index 2e6f408ab6..c7b9f83a1a 100644 --- a/localization/i18n/ja/Snapmaker_Orca_ja.po +++ b/localization/i18n/ja/Snapmaker_Orca_ja.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -14,11 +14,117 @@ msgstr "" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 3.2.2\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "" + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "温度" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "待機中" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "シリアル番号" + +msgid "Version:" +msgstr "バージョン" + +msgid "Latest version" +msgstr "最新バージョン" + +msgid "Support Painting" msgstr "サポートペイント" -msgid "Alt + Mouse wheel" -msgstr "Alt + マウスホイール" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "マウスホイール" msgid "Section view" msgstr "断面" @@ -26,9 +132,6 @@ msgstr "断面" msgid "Reset direction" msgstr "方向をリセット" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + スクロール" - msgid "Pen size" msgstr "ペンサイズ" @@ -44,9 +147,6 @@ msgstr "右マウスボタン" msgid "Block supports" msgstr "サポートをブロックする" -msgid "Shift + Left mouse button" -msgstr "Shift + マウスの左ボタン" - msgid "Erase" msgstr "消去" @@ -110,7 +210,7 @@ msgstr "底面選択" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "使用するフィラメント数は多いです。最初%1%個のフィラメントを使用できます" @@ -151,12 +251,21 @@ msgstr "塗りつぶしバッチ処理" msgid "Height range" msgstr "高さ範囲" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "ワイヤフレームの表示/非表示" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "取消し" + msgid "Shortcut Key " msgstr "ショートカット" @@ -167,10 +276,10 @@ msgid "Height Range" msgstr "高さ範囲" msgid "Vertical" -msgstr "Vertical" +msgstr "" msgid "Horizontal" -msgstr "Horizontal" +msgstr "" msgid "Remove painted color" msgstr "塗った色を消去" @@ -179,9 +288,33 @@ msgstr "塗った色を消去" msgid "Painted using: Filament %1%" msgstr "フィラメント %1%でペイントします" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "サイズ" + +msgid "Brush shape" +msgstr "ブラシタイプ" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "移動" +msgid "Please select at least one object." +msgstr "最低１つのオブジェクトを選択してください。" + msgid "Gizmo-Move" msgstr "ギズモ-移動" @@ -212,14 +345,20 @@ msgstr "に" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "位置" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "回転" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "倍率" @@ -236,9 +375,6 @@ msgstr "移動" msgid "Group Operations" msgstr "グループ操作" -msgid "Set Position" -msgstr "位置を設定" - msgid "Set Orientation" msgstr "向きを設定" @@ -251,30 +387,39 @@ msgstr "位置をリセット" msgid "Reset Rotation" msgstr "回転をリセット" -msgid "World coordinates" -msgstr "空間座標" - msgid "Object coordinates" msgstr "オブジェクト座標" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "空間座標" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "サイズ" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "スケール" msgid "Planar" -msgstr "Planar" +msgstr "" msgid "Dovetail" -msgstr "Dovetail" +msgstr "" msgid "Auto" msgstr "自動" @@ -283,37 +428,37 @@ msgid "Manual" msgstr "手動" msgid "Plug" -msgstr "Plug" +msgstr "" msgid "Dowel" -msgstr "Dowel" +msgstr "" msgid "Snap" -msgstr "Snap" +msgstr "スナップ" msgid "Prism" msgstr "プリズム" msgid "Frustum" -msgstr "Frustum" +msgstr "" msgid "Square" -msgstr "四角形" +msgstr "" msgid "Hexagon" -msgstr "六角形" +msgstr "" msgid "Keep orientation" -msgstr "パーツの向きを維持" +msgstr "" msgid "Place on cut" -msgstr "Place on cut" +msgstr "" msgid "Flip upside down" msgstr "上下反転" msgid "Connectors" -msgstr "Connectors" +msgstr "" msgid "Type" msgstr "タイプ" @@ -328,19 +473,25 @@ msgstr "形状" #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" -msgstr "深さ" +msgstr "" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "回転" msgid "Groove" -msgstr "Groove" +msgstr "" msgid "Width" msgstr "幅" msgid "Flap Angle" -msgstr "Flap Angle" +msgstr "" msgid "Groove Angle" -msgstr "Groove Angle" +msgstr "" msgid "Part" msgstr "パーツ" @@ -368,43 +519,43 @@ msgid "Move cut plane" msgstr "カット面の移動" msgid "Mode" -msgstr "モード" +msgstr "" msgid "Change cut mode" msgstr "カットモード変更" msgid "Tolerance" -msgstr "隙間の間隔" +msgstr "公差" msgid "Drag" -msgstr "Drag" +msgstr "" msgid "Draw cut line" -msgstr "カットラインを描く" +msgstr "" msgid "Left click" msgstr "左クリック" msgid "Add connector" -msgstr "Add connector" +msgstr "" msgid "Right click" -msgstr "Right click" +msgstr "右クリック" msgid "Remove connector" -msgstr "継ぎ手を削除" +msgstr "" msgid "Move connector" -msgstr "継ぎ手を移動" +msgstr "" msgid "Add connector to selection" -msgstr "継ぎ手を選択リストに追加" +msgstr "" msgid "Remove connector from selection" -msgstr "継ぎ手を選択リストから削除" +msgstr "" msgid "Select all connectors" -msgstr "すべての継ぎ手を選択" +msgstr "" msgid "Cut" msgstr "カット" @@ -413,10 +564,10 @@ msgid "Rotate cut plane" msgstr "カット面の回転" msgid "Remove connectors" -msgstr "Remove connectors" +msgstr "" msgid "Bulge" -msgstr "Bulge" +msgstr "" msgid "Bulge proportion related to radius" msgstr "バルジの比率と半径の関係" @@ -428,10 +579,7 @@ msgid "Space proportion related to radius" msgstr "半径に関係する空間の割合" msgid "Confirm connectors" -msgstr "Confirm connectors" - -msgid "Cancel" -msgstr "取消し" +msgstr "" msgid "Build Volume" msgstr "ビルドボリューム" @@ -456,10 +604,10 @@ msgid "Reset cutting plane" msgstr "カット面をリセット" msgid "Edit connectors" -msgstr "継ぎ手を編集" +msgstr "" msgid "Add connectors" -msgstr "継ぎ手を追加" +msgstr "" msgid "Reset cut" msgstr "カットをリセット" @@ -468,19 +616,19 @@ msgid "Reset cutting plane and remove connectors" msgstr "カット面をリセットし、コネクターを削除" msgid "Upper part" -msgstr "上側の部品" +msgstr "上部パーツ" msgid "Lower part" -msgstr "下側の部品" +msgstr "下部パーツ" msgid "Keep" -msgstr "維持" +msgstr "残す" msgid "Flip" -msgstr "ひっくり返す" +msgstr "" msgid "After cut" -msgstr "カット後" +msgstr "" msgid "Cut to parts" msgstr "パーツに割り切る" @@ -492,7 +640,7 @@ msgid "Warning" msgstr "警告" msgid "Invalid connectors detected" -msgstr "無効な継ぎ手が見つかりました" +msgstr "" #, c-format, boost-format msgid "%1$d connector is out of cut contour" @@ -505,7 +653,7 @@ msgid_plural "%1$d connectors are out of object" msgstr[0] "" msgid "Some connectors are overlapped" -msgstr "Some connectors are overlapped" +msgstr "" msgid "Select at least one object to keep after cutting." msgstr "カットした後に残すものを1つ以上選んでください。" @@ -517,7 +665,7 @@ msgid "Cut plane with groove is invalid" msgstr "溝のあるカット面は無効" msgid "Connector" -msgstr "Connector" +msgstr "" msgid "Cut by Plane" msgstr "面でカット" @@ -585,14 +733,10 @@ msgstr "%d 個の三角形" msgid "Show wireframe" msgstr "ワイヤフレームを表示" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "プレビュー処理中は適用できません" -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "操作を取り消し中、少々お待ちください。" msgid "Face recognition" @@ -601,12 +745,6 @@ msgstr "外観認識" msgid "Perform Recognition" msgstr "認識を実行" -msgid "Brush size" -msgstr "サイズ" - -msgid "Brush shape" -msgstr "ブラシタイプ" - msgid "Enforce seam" msgstr "強制継ぎ目" @@ -637,30 +775,30 @@ msgid "Thickness" msgstr "太さ" msgid "Text Gap" -msgstr "Text Gap" +msgstr "" msgid "Angle" -msgstr "角度" +msgstr "" msgid "" -"Embeded\n" +"Embedded\n" "depth" -msgstr "Embedded depth" +msgstr "" msgid "Input text" msgstr "テキスト" msgid "Surface" -msgstr "Surface" +msgstr "" msgid "Horizontal text" -msgstr "Horizontal text" +msgstr "" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mouse move up or down" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" -msgstr "文字を回転" +msgstr "" msgid "Text shape" msgstr "文字形状" @@ -782,7 +920,7 @@ msgid "Change Text Type" msgstr "テキストタイプ変更" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "エンボステキスト用のスタイル(%1%) をリネームする" msgid "Name can't be empty." @@ -976,7 +1114,7 @@ msgstr "テキストの中心からモデル表面までの距離。" msgid "Undo rotation" msgstr "回転を取り消す" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "テキストを時計回りに回転。" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -998,10 +1136,14 @@ msgstr "テキストをカメラに向ける" msgid "Orient the text towards the camera." msgstr "テキストの向きをカメラ側にする。" +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "全く同じフォント(\"%1%\")を読み込むことができません。アプリケーションは似たよ" "うなもの(\"%2%\")を選択しました。編集テキストを有効にするには、フォントを指定" @@ -1117,11 +1259,11 @@ msgstr "塗りつぶしパスを開く" msgid "Undefined stroke type" msgstr "未定義のストロークタイプ" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "自己交差および複数のポイントからパスを修復できません。" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "最終的な形状には、同じ座標を持つ複数の点の自己交差が含まれています。" @@ -1129,7 +1271,7 @@ msgstr "最終的な形状には、同じ座標を持つ複数の点の自己交 msgid "Shape is marked as invisible (%1%)." msgstr "図形は非表示としてマークされています (%1%)" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1161,7 +1303,8 @@ msgstr "ディスクからSVGファイルを再読込みします。" msgid "Change file" msgstr "ファイル変更" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "別の .svg ファイルに変更します" msgid "Forget the file path" @@ -1188,7 +1331,8 @@ msgstr "別名で保存" msgid "Save SVG file" msgstr "SVGファイルの保存" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "'.svg' ファイルとして保存" msgid "Size in emboss direction." @@ -1256,60 +1400,64 @@ msgstr "Nano SVG パーサーはファイル(%1%)からロードできません msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG ファイルには、エンボスされる単一のパス(%1%)が含まれていません。" -msgid "Vertex" -msgstr "Vertex" - -msgid "Edge" -msgstr "Edge" - -msgid "Plane" -msgstr "Plane" - -msgid "Point on edge" -msgstr "Point on edge" - -msgid "Point on circle" -msgstr "Point on circle" - -msgid "Point on plane" -msgstr "Point on plane" - -msgid "Center of edge" -msgstr "Center of edge" - -msgid "Center of circle" -msgstr "Center of circle" - -msgid "ShiftLeft mouse button" +msgid "No feature" msgstr "" +msgid "Vertex" +msgstr "" + +msgid "Edge" +msgstr "" + +msgid "Plane" +msgstr "" + +msgid "Point on edge" +msgstr "" + +msgid "Point on circle" +msgstr "" + +msgid "Point on plane" +msgstr "" + +msgid "Center of edge" +msgstr "" + +msgid "Center of circle" +msgstr "円の中心" + msgid "Select feature" -msgstr "Select feature" +msgstr "" msgid "Select point" -msgstr "Select point" +msgstr "" msgid "Delete" msgstr "削除" msgid "Restart selection" -msgstr "Restart selection" +msgstr "" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "選択解除" +msgid "Cancel a feature until exit" +msgstr "" msgid "Measure" -msgstr "Measure" +msgstr "" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" msgid "Edit to scale" -msgstr "Edit to scale" +msgstr "" msgctxt "Verb" -msgid "Scale" -msgstr "スケール" +msgid "Scale all" +msgstr "全て拡縮" msgid "None" msgstr "無し" @@ -1321,25 +1469,81 @@ msgid "Length" msgstr "長さ" msgid "Selection" -msgstr "Selection" +msgstr "" + +msgid " (Moving)" +msgstr " (移動中)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "オブジェクト上の2面を選択し結合する。" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"オブジェクト上の2点または円を選択し、\n" +"その間の距離を特定する。" + +msgid "Face" +msgstr "" + +msgid " (Fixed)" +msgstr "（固定）" + +msgid "Point" +msgstr "点" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" + +msgid "Warning: please select Plane's feature." +msgstr "" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" + +msgid "Warning: please select two different meshes." +msgstr "" msgid "Copy to clipboard" msgstr "コピー" msgid "Perpendicular distance" -msgstr "Perpendicular distance" +msgstr "" msgid "Distance" -msgstr "Distance" +msgstr "" msgid "Direct distance" -msgstr "Direct distance" +msgstr "" msgid "Distance XYZ" -msgstr "Distance XYZ" +msgstr "" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "平行" + +msgid "Center coincidence" +msgstr "" + +msgid "Feature 1" +msgstr "フィーチャー1" + +msgid "Reverse rotation" +msgstr "回転方向を反転" + +msgid "Rotate around center:" +msgstr "中心付近で回転" + +msgid "Parallel distance:" +msgstr "" + +msgid "Flip by Face 2" +msgstr "" msgid "Notice" msgstr "通知" @@ -1374,8 +1578,11 @@ msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "構成ファイル %1% がロードされましたが、一部の値が認識できませんでした" +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" @@ -1419,6 +1626,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1462,26 +1673,27 @@ msgstr "プリセットを読込む" msgid "Loading a mode view" msgstr "モードビューをロード" -msgid "Choose one file (3mf):" -msgstr "ファイルを選択 (3mf):" +msgid "Choose one file (3MF):" +msgstr "ファイルを選択 (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "" +"1つ以上のファイルを選択してください (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "ファイルを選択 (3mf/step/stl/svg/obj/amf)" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "ファイルを選択 (3MF/STEP/STL/SVG/OBJ/AMF)" msgid "Choose ZIP file" msgstr "ZIPファイルの選択" -msgid "Choose one file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" msgstr "" msgid "Some presets are modified." msgstr "プリセットが変更されました。" msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "変更したプリセットをデフォルトとして保存できます" @@ -1496,23 +1708,21 @@ msgstr "プロジェクトを開く" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "現在のSnapmaker Orcaはバージョンが古いため使用できません、アップデートしてくださ" "い。" msgid "Privacy Policy Update" -msgstr "Privacy Policy Update" +msgstr "" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"The number of user presets cached in the cloud has exceeded the upper limit, " -"newly created user presets can only be used locally." msgid "Sync user presets" -msgstr "Sync user presets" +msgstr "" msgid "Loading user preset" msgstr "ユーザープリセットを読込み中" @@ -1549,13 +1759,13 @@ msgstr "" "設定ウィザードで保存先フォルダーを選択してください。" msgid "Import File" -msgstr "Import File" +msgstr "ファイルインポート" msgid "Choose files" msgstr "ファイルを選択" msgid "New Folder" -msgstr "New Folder" +msgstr "" msgid "Open" msgstr "開く" @@ -1567,7 +1777,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "GUI初期化に失敗した" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "重大なエラー: %1%" msgid "Quality" @@ -1597,12 +1807,18 @@ msgstr "トップソリッド層" msgid "Top Minimum Shell Thickness" msgstr "トップ面最小厚み" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "底面ソリッド層" msgid "Bottom Minimum Shell Thickness" msgstr "底面最小厚さ" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "アイロン" @@ -1669,6 +1885,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "選択したオブジェクトを削除" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "ファイルを読込む" @@ -1690,6 +1909,9 @@ msgstr "Torus" msgid "Orca Cube" msgstr "" +msgid "Orca Tolerance Test" +msgstr "" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1707,7 +1929,7 @@ msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1717,7 +1939,7 @@ msgid "Text" msgstr "テキスト" msgid "Height range Modifier" -msgstr "Height Range Modifier" +msgstr "" msgid "Add settings" msgstr "設定を追加" @@ -1732,10 +1954,10 @@ msgid "Set as individual objects" msgstr "個別オブジェクトとして設定" msgid "Fill bed with copies" -msgstr "Fill bed with copies" +msgstr "コピーでビルドプレートを埋める" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "Fill the remaining area of bed with copies of the selected object" +msgstr "選択したオブジェクトのコピーでビルドプレートの残りの領域を埋める" msgid "Printable" msgstr "造形可能" @@ -1744,10 +1966,10 @@ msgid "Fix model" msgstr "モデルを修復" msgid "Export as one STL" -msgstr "Export as one STL" +msgstr "1つのSTLとしてエクスポート" msgid "Export as STLs" -msgstr "Export as STLs" +msgstr "" msgid "Reload from disk" msgstr "ディスクから再読込み" @@ -1761,6 +1983,12 @@ msgstr "STLに置き換え" msgid "Replace the selected part with new STL" msgstr "選択したパーツを新しいSTLに置換え" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "フィラメントを変更" @@ -1798,16 +2026,16 @@ msgstr "サポートにフラッシュ" msgid "Edit in Parameter Table" msgstr "パラメータテーブルで編集" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "インチから変換" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "インチ単位に復元" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "メートルから変換" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "メータル単位に復元" msgid "Assemble" @@ -1820,10 +2048,10 @@ msgid "Assemble the selected objects to an object with single part" msgstr "選択したオブジェクトを一つオブジェクトに組み立てます（単パーツ）" msgid "Mesh boolean" -msgstr "Mesh boolean" +msgstr "メッシュブール" msgid "Mesh boolean operations including union and subtraction" -msgstr "Mesh boolean operations including union and subtraction" +msgstr "結合や減算などのメッシュのブール演算" msgid "Along X axis" msgstr "X軸方向" @@ -1859,7 +2087,7 @@ msgid "Change SVG source file, projection, size, ..." msgstr "SVG ソース ファイル、プロジェクション、サイズなどを変更します。" msgid "Invalidate cut info" -msgstr "Invalidate cut info" +msgstr "" msgid "Add Primitive" msgstr "プリミティブを追加" @@ -1894,9 +2122,18 @@ msgstr "選択したオブジェクトを分割" msgid "Auto orientation" msgstr "自動向き調整" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "オブジェクトの向きを自動的に調整する" +msgid "Edit" +msgstr "編集" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "全てを選択" @@ -1916,10 +2153,10 @@ msgid "arrange current plate" msgstr "現在のプレートをレイアウト" msgid "Reload All" -msgstr "" +msgstr "全て再読み込み" msgid "reload all from disk" -msgstr "" +msgstr "全てディスクから再読み込み" msgid "Auto Rotate" msgstr "自動回転" @@ -1928,11 +2165,35 @@ msgid "auto rotate current plate" msgstr "現在のプレートを自動回転させる" msgid "Delete Plate" -msgstr "Delete Plate" +msgstr "" msgid "Remove the selected plate" msgstr "選択したプレートを削除" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "複製" @@ -1942,9 +2203,18 @@ msgstr "モデルを簡略化" msgid "Center" msgstr "センター" +msgid "Drop" +msgstr "" + msgid "Edit Process Settings" msgstr "プロセス設定を編集" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "一つのオブジェクトのパラメータを編集" @@ -1961,13 +2231,13 @@ msgid "Lock" msgstr "ロック" msgid "Edit Plate Name" -msgstr "Edit Plate Name" +msgstr "" msgid "Name" msgstr "名称" msgid "Fila." -msgstr "Fila." +msgstr "" #, c-format, boost-format msgid "%1$d error repaired" @@ -1987,8 +2257,8 @@ msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$dの非多様体エッジがあります" -msgid "Right click the icon to fix model object" -msgstr "右クリックしオブジェクトを修復します" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "右クリックしオブジェクト設定を開きます" @@ -1997,7 +2267,7 @@ msgid "Click the icon to reset all settings of the object" msgstr "オブジェクトへの編集をリセットします" msgid "Right button click the icon to drop the object printable property" -msgstr "Right click the icon to drop the object printable property" +msgstr "" msgid "Click the icon to toggle printable property of the object" msgstr "オブジェクトの造形属性を切り替えます" @@ -2009,7 +2279,7 @@ msgid "Click the icon to edit color painting of the object" msgstr "オブジェクトに色塗りをします" msgid "Click the icon to shift this object to the bed" -msgstr "Click the icon to shift this object to the bed" +msgstr "" msgid "Loading file" msgstr "ファイルを読み込み中" @@ -2018,7 +2288,7 @@ msgid "Error!" msgstr "エラー！" msgid "Failed to get the model data in the current file." -msgstr "Failed to get the model data in the current file." +msgstr "" msgid "Generic" msgstr "一般" @@ -2035,76 +2305,72 @@ msgid "" "objects." msgstr "オブジェクト設定で、各オブジェクトの造形設定を指定できます。" +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" -msgstr "Delete connector from object which is a part of cut" +msgstr "" msgid "Delete solid part from object which is a part of cut" -msgstr "Delete solid part from object which is a part of cut" +msgstr "" msgid "Delete negative volume from object which is a part of cut" -msgstr "Delete negative volume from object which is a part of cut" +msgstr "" msgid "" "To save cut correspondence you can delete all connectors from all related " "objects." msgstr "" -"To save cut correspondence you can delete all connectors from all related " -"objects." msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." -msgstr "" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " "cut information first." +msgstr "" msgid "Delete all connectors" -msgstr "Delete all connectors" +msgstr "全てのコネクターを削除" msgid "Deleting the last solid part is not allowed." msgstr "最後のソリッドパーツは削除できません。" -msgid "The target object contains only one part and can not be splited." -msgstr "オブジェクトは一つだけのパーツが入っており、分割できません。" +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" msgstr "アセンブリ" msgid "Cut Connectors information" -msgstr "Cut Connectors information" +msgstr "" msgid "Object manipulation" -msgstr "Object manipulation" +msgstr "" msgid "Group manipulation" -msgstr "Group manipulation" +msgstr "" msgid "Object Settings to modify" -msgstr "Object Settings to Modify" +msgstr "" msgid "Part Settings to modify" -msgstr "Part Settings to Modify" +msgstr "" msgid "Layer range Settings to modify" -msgstr "Layer Range Settings to Modify" +msgstr "" msgid "Part manipulation" -msgstr "Part manipulation" +msgstr "" msgid "Instance manipulation" -msgstr "Instance manipulation" +msgstr "" msgid "Height ranges" -msgstr "Height ranges" +msgstr "" msgid "Settings for height range" -msgstr "Settings for height range" +msgstr "" msgid "Layer" msgstr "積層" @@ -2113,14 +2379,14 @@ msgid "Selection conflicts" msgstr "選択の競合" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "最初に選択したのがオブジェクトの場合、次に選択できるのがオブジェクトのみで" "す。" msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "最初に選択したがパーツの場合、次に選択できるのが同じオブジェクトのパーツ" @@ -2169,10 +2435,10 @@ msgid "to" msgstr "→" msgid "Remove height range" -msgstr "Remove height range" +msgstr "" msgid "Add height range" -msgstr "Add height range" +msgstr "" msgid "Invalid numeric." msgstr "無効な数値" @@ -2180,7 +2446,7 @@ msgstr "無効な数値" msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "一つのセルは、同じ列のセルにしかコピーできません" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "複数のセルのコピーには対応していません。" msgid "Outside" @@ -2201,14 +2467,17 @@ msgstr "オートブリム" msgid "Mouse ear" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" -msgstr "Outer brim only" +msgstr "外側ブリムのみ" msgid "Inner brim only" -msgstr "Inner brim only" +msgstr "内側ブリムのみ" msgid "Outer and inner brim" -msgstr "Outer and inner brim" +msgstr "外側および内側ブリム" msgid "No-brim" msgstr "ブリム無し" @@ -2253,19 +2522,19 @@ msgid "Pause" msgstr "一時停止" msgid "Template" -msgstr "Template" +msgstr "" msgid "Custom" msgstr "カスタム" msgid "Pause:" -msgstr "Pause:" +msgstr "" msgid "Custom Template:" -msgstr "Custom Template:" +msgstr "" msgid "Custom G-code:" -msgstr "Custom G-code:" +msgstr "" msgid "Custom G-code" msgstr "カスタム G-code" @@ -2283,40 +2552,40 @@ msgid "Add Pause" msgstr "一時停止を追加" msgid "Insert a pause command at the beginning of this layer." -msgstr "Insert a pause command at the beginning of this layer." +msgstr "このレイヤーの先頭にポーズコマンドを挿入" msgid "Add Custom G-code" msgstr "カスタムG-codeを追加" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Insert custom G-code at the beginning of this layer." +msgstr "" msgid "Add Custom Template" msgstr "カスタムテンプレートを追加" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "Insert template custom G-code at the beginning of this layer." +msgstr "このレイヤーの先頭にテンプレートカスタムGコードを挿入" msgid "Filament " msgstr "フィラメント" msgid "Change filament at the beginning of this layer." -msgstr "Change filament at the beginning of this layer." +msgstr "このレイヤーの先頭でフィラメントを交換" msgid "Delete Pause" -msgstr "Delete Pause" +msgstr "" msgid "Delete Custom Template" -msgstr "Delete Custom Template" +msgstr "" msgid "Edit Custom G-code" -msgstr "Edit Custom G-code" +msgstr "" msgid "Delete Custom G-code" -msgstr "Delete Custom G-code" +msgstr "" msgid "Delete Filament Change" -msgstr "Delete Filament Change" +msgstr "" msgid "No printer" msgstr "プリンタ無し" @@ -2328,81 +2597,159 @@ msgid "Failed to connect to the server" msgstr "サーバーに接続できませんでした" msgid "Check the status of current system services" -msgstr "Check the status of current system services" +msgstr "" msgid "code" msgstr "code" msgid "Failed to connect to cloud service" -msgstr "Failed to connect to cloud service" +msgstr "クラウドサービスへの接続に失敗しました。" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Please click on the hyperlink above to view the cloud service status" +msgstr "" +"クラウドサービスのステータスを確認するには、上記のハイパーリンクをクリックし" +"てください。" msgid "Failed to connect to the printer" msgstr "プリンターへ接続できませんでした" msgid "Connection to printer failed" -msgstr "Connection to printer failed" +msgstr "プリンターへの接続に失敗しました。" msgid "Please check the network connection of the printer and Orca." -msgstr "Please check the network connection of the printer and Orca." +msgstr "プリンターとOrcaのネットワーク接続を確認してください。" msgid "Connecting..." msgstr "接続中…" -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "空" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Refill" - -msgid "AMS not connected" -msgstr "AMS が接続されていません" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "" msgid "Unload" msgstr "ｱﾝﾛｰﾄﾞ" -msgid "Ext Spool" -msgstr "外部スプールホルダー" - -msgid "Tips" -msgstr "ヒント" - -msgid "Guide" -msgstr "ガイド" - -msgid "Retry" -msgstr "再試行" - -msgid "Calibrating AMS..." -msgstr "AMS キャリブレーション" - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"キャリブレーション中に問題が発生しました。クリックして解決策をご確認くださ" -"い。" -msgid "Calibrate again" -msgstr "再度キャリブレーションを行う" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "キャリブレーションを取消し" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "フィルター" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "冷却" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "トップ" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "補助" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." -msgstr "Idling..." +msgstr "" msgid "Heat the nozzle" msgstr "ノズルを加熱" @@ -2416,44 +2763,37 @@ msgstr "フィラメントを引き戻す" msgid "Push new filament into extruder" msgstr "フィラメントを押出機に押入れる" +msgid "Grab new filament" +msgstr "" + msgid "Purge old filament" msgstr "古いフィラメントを排出" -msgid "Feed Filament" -msgstr "Feed Filament" - msgid "Confirm extruded" -msgstr "Confirm that filament has been extruded" +msgstr "" msgid "Check filament location" -msgstr "Check filament location" - -msgid "Grab new filament" -msgstr "Grab new filament" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." msgstr "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filament." -msgid "Edit" -msgstr "編集" +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "選択したオブジェクトはロックされたプレートにあるため、自動レイアウトできませ" "ん" -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "選択したオブジェクトがレイアウト不可です" msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "現在のプレートがロックされたため自動レイアウトできません" msgid "Arranging..." @@ -2488,15 +2828,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "選択したオブジェクトはロックされたプレートにあるため、自動向き調整できませ" "ん。" msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "プレートがロックされています。\n" "自動向き調整ができません。" @@ -2511,13 +2851,13 @@ msgid "Orienting canceled." msgstr "" msgid "Filling" -msgstr "Filling" +msgstr "" msgid "Bed filling canceled." -msgstr "Bed filling canceled." +msgstr "" msgid "Bed filling done." -msgstr "Bed filling done." +msgstr "" msgid "Searching for optimal orientation" msgstr "最適方向を探す" @@ -2538,55 +2878,47 @@ msgid "Please check the printer network connection." msgstr "プリンターとのネットワーク接続をご確認ください" msgid "Abnormal print file data. Please slice again." -msgstr "Abnormal print file data: please slice again." +msgstr "" msgid "Task canceled." -msgstr "Task canceled." +msgstr "" msgid "Upload task timed out. Please check the network status and try again." -msgstr "Upload task timed out. Please check the network status and try again." +msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "クラウドサービス接続できませんでした、もう一度お試しください" -msgid "Print file not found. please slice again." -msgstr "Print file not found; please slice again." +msgid "Print file not found. Please slice again." +msgstr "" msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." msgid "Failed to send the print job. Please try again." msgstr "造形タスクを送信できませんでした、もう一度お試しください。" msgid "Failed to upload file to ftp. Please try again." -msgstr "Failed to upload file to ftp. Please try again." +msgstr "" msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Check the current status of the Bambu Lab server by clicking on the link " -"above." msgid "" "The size of the print file is too large. Please adjust the file size and try " "again." msgstr "" -"The size of the print file is too large. Please adjust the file size and try " -"again." -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "Print file not found; please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." +msgstr "" msgid "" "Failed to upload print file to FTP. Please check the network status and try " "again." msgstr "" -"Failed to upload print file via FTP. Please check the network status and try " -"again." msgid "Sending print job over LAN" msgstr "LAN経由で造形タスクを送信" @@ -2595,7 +2927,7 @@ msgid "Sending print job through cloud service" msgstr "クラウド経由で造形タスクを送信" msgid "Print task sending times out." -msgstr "Print task sending times out." +msgstr "" msgid "Service Unavailable" msgstr "サービスは利用できません" @@ -2612,52 +2944,85 @@ msgstr "送信しました、%s秒後デバイスページへ移動します" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" -msgstr "Successfully sent. Automatically jumping to the next page in %ss" +msgstr "" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "SDカードが必要です" +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "LANでG-codeファイルを送信" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "G-codeファイルをSDカードに送信" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "送信しました、%s秒後自動閉じます。" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "SDカードが必要です" +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" -msgstr "Importing SLA archive" +msgstr "" msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer presets first before importing that SLA archive." msgid "Importing canceled." -msgstr "Importing canceled." +msgstr "" msgid "Importing done." -msgstr "Importing done." +msgstr "" msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "You cannot load an SLA project with a multi-part object on the bed" +msgstr "" msgid "Please check your object list before preset changing." -msgstr "Please check your object list before preset changing." +msgstr "" msgid "Attention!" msgstr "注意！" @@ -2668,10 +3033,10 @@ msgstr "ダウンロード中" msgid "Download failed" msgstr "ダウンロード失敗" -msgid "Cancelled" +msgid "Canceled" msgstr "取消し済" -msgid "Install successfully." +msgid "Installed successfully" msgstr "インストール完了" msgid "Installing" @@ -2693,9 +3058,9 @@ msgid "Snapmaker Orca is licensed under " msgstr "Snapmaker Orcaのライセンス" msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, version 3" +msgstr "" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2712,9 +3077,6 @@ msgstr "" msgid "About %s" msgstr "%s について" -msgid "Snapmaker Orca " -msgstr "" - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" @@ -2729,8 +3091,6 @@ msgid "" "Slic3r was created by Alessandro Ranellucci with the help of many other " "contributors." msgstr "" -"Slic3r was created by Alessandro Ranellucci with the help of many other " -"contributors." msgid "Version" msgstr "バージョン" @@ -2744,9 +3104,6 @@ msgstr "確認" msgid "Close" msgstr "閉じる" -msgid "Colour" -msgstr "色" - msgid "" "Nozzle\n" "Temperature" @@ -2765,14 +3122,11 @@ msgstr "入力値範囲は %1% ～ %2%" msgid "SN" msgstr "シリアル番号" -msgid "Setting AMS slot information while printing is not supported" -msgstr "造形中に、AMSスロットを設定できません。" - msgid "Factors of Flow Dynamics Calibration" -msgstr "Factors of Flow Dynamics Calibration" +msgstr "" msgid "PA Profile" -msgstr "PA Profile" +msgstr "" msgid "Factor K" msgstr "係数K" @@ -2780,14 +3134,17 @@ msgstr "係数K" msgid "Factor N" msgstr "係数N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "造形中に、AMSスロットを設定できません。" + msgid "Setting Virtual slot information while printing is not supported" -msgstr "Setting Virtual slot information while printing is not supported" +msgstr "" msgid "Are you sure you want to clear the filament information?" -msgstr "Are you sure you want to clear the filament information?" +msgstr "" msgid "You need to select the material type and color first." -msgstr "You need to select the material type and color first." +msgstr "" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" @@ -2797,11 +3154,20 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" -msgstr "Other Color" +msgstr "" msgid "Custom Color" -msgstr "Custom Color" +msgstr "" msgid "Dynamic flow calibration" msgstr "流量キャリブレーション" @@ -2827,15 +3193,9 @@ msgstr "ベッド温度" msgid "Max volumetric speed" msgstr "最大体積速度" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "ベッド温度" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "開始" @@ -2876,12 +3236,79 @@ msgstr "流量キャリブレーション" msgid "Step" msgstr "手順" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMSスロット" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "ノズル" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "注: 同じ素材がロードされた AMS スロットのみが選択できます。" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" msgstr "AMSを有効" @@ -2895,22 +3322,15 @@ msgstr "AMSを無効" msgid "Print with the filament mounted on the back of chassis" msgstr "外部スプールホルダーのフィラメントで造形します" -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "造形用のフィラメントに対するAMSスロットを設定" msgid "Filament used in this print job" @@ -2928,40 +3348,49 @@ msgstr "AMSを有効にしない" msgid "Print using materials mounted on the back of the case" msgstr "外部スプールホルダーのフィラメントで造形します" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "AMSのフィラメントで造形します" msgid "Print with filaments mounted on the back of the chassis" msgstr "外部スプールホルダーのフィラメントで造形します" +msgid "Auto Refill" +msgstr "" + +msgid "Left" +msgstr "左面" + +msgid "Right" +msgstr "右面" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "" -"When the current material runs out, the printer will continue to print " -"materials in the following order." + +msgid "Identical filament: same brand, type and color" +msgstr "" msgid "Group" -msgstr "Group" +msgstr "" + +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" msgid "The printer does not currently support auto refill." -msgstr "The printer does not currently support auto refill." +msgstr "" msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -2983,11 +3412,9 @@ msgstr "" "秒ほどかかります）" msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" -"Note: if a new filament is inserted during printing, the AMS will not " -"automatically read any information until printing is completed." msgid "" "When inserting a new filament, the AMS will not automatically read its " @@ -2999,8 +3426,8 @@ msgstr "起動時に自動更新" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "起動時、フィラメント情報を自動的に読込みます（60秒ほどかかります）　注意：読" "込み時に、スプールが回転します。" @@ -3015,30 +3442,25 @@ msgid "Update remaining capacity" msgstr "残量を更新" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"BambuLab純正フィラメントの場合、残量の推定を行います。造形時に、残量自動的に" -"更新します。" msgid "AMS filament backup" -msgstr "AMS filament backup" +msgstr "" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "使用中のフィラメントが切れた時に、同じ属性のフィラメントに切り替えます" msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." msgid "File" msgstr "ファイル" @@ -3079,10 +3501,14 @@ msgstr "" "エラーが発生しました。システムのメモリ不足か、不具合が発生した可能性がありま" "す。" -msgid "Please save project and restart the program. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" + +msgid "Please save project and restart the program." msgstr "プロジェクトを保存して、アプリケーションを再起動してください。" -msgid "Processing G-Code from Previous file..." +msgid "Processing G-code from Previous file..." msgstr "G-codeを処理中" msgid "Slicing complete" @@ -3104,18 +3530,18 @@ msgid "Underflow" msgstr "アンダーフロー" msgid "Floating reserved operand" -msgstr "Floating reserved operand" +msgstr "" msgid "Stack overflow" -msgstr "Stack Overflow" +msgstr "" msgid "Running post-processing scripts" msgstr "後処理スクリプトを実行" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Gコードのエクスポート中に不明なエラーが発生しました。" #, boost-format @@ -3166,12 +3592,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Gコードファイルを%1%にエクスポートしました" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "不明なエラー: G-codeエクスポート" #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3188,225 +3614,6 @@ msgstr "" "%1%にタスクをスケジューリングしました、詳細は「ウインドウ→タスクキュー」にて" "ご確認ください。" -msgid "Device" -msgstr "デバイス" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "オフライン" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "表示" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "追加" - -msgid "Idle" -msgstr "待機中" - -msgid "Printing" -msgstr "造形中" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "準備" - -msgid "Slicing" -msgstr "スライス中" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "送信中" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "再開" - -msgid "Stop" -msgstr "中止" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "読込み中" - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "造形タスクを準備" - -msgid "Abnormal print file data. Please slice again" -msgstr "ファイルに異常があります、もう一度スライスしてください" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "ベッドレベリング" - -msgid "Timelapse" -msgstr "タイムラプス" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "送信" - -msgid "Name is invalid;" -msgstr "名称が無効です" - -msgid "illegal characters:" -msgstr "無効な文字:" - -msgid "illegal suffix:" -msgstr "無効なサフィックス" - -msgid "The name is not allowed to be empty." -msgstr "「名前」が空です" - -msgid "The name is not allowed to start with space character." -msgstr "名前の先頭にスペースを入れないでください" - -msgid "The name is not allowed to end with space character." -msgstr "名前の最後にスペースを入れないでください" - -msgid "The name length exceeds the limit." -msgstr "The name length exceeds the limit." - msgid "Origin" msgstr "原点" @@ -3472,22 +3679,21 @@ msgstr "STLファイル（ベッドモデル）をインポート" msgid "Bed Shape" msgstr "ベッド形状" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" msgid "Please check.\n" -msgstr "Please check.\n" +msgstr "" msgid "" "Nozzle may be blocked when the temperature is out of recommended range.\n" @@ -3499,33 +3705,30 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "このフィラメントで推奨ノズル温度は %d ~ %d ℃です。" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"Current chamber temperature is higher than the material's safe temperature; " -"this may result in material softening and nozzle clogs.The maximum safe " -"temperature for the material is %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "積層ピッチが小さすぎます、0.2にリセットされました" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "値が小さいです、0.1にリセットします" msgid "" @@ -3562,14 +3765,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3607,30 +3810,40 @@ msgstr "" "はい - プライムタワーを有効にする\n" "いいえ - 「独立サポート積層ピッチ」を有効にする" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"While printing by object, the extruder may collide with a skirt.\n" -"Thus, reset the skirt layer to 1 to avoid collisions." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." msgid " But machines with I3 structure will not generate timelapse videos." -msgstr " But machines with I3 structure will not generate timelapse videos." +msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" @@ -3638,14 +3851,17 @@ msgstr "" "はい - 変更して、スパイラルモードを有効にします\n" "いいえ - 変更せず、スパイラルモードを有効しません" +msgid "Printing" +msgstr "造形中" + msgid "Auto bed leveling" msgstr "自動ベッドレベリング" msgid "Heatbed preheating" msgstr "ベッド予熱" -msgid "Sweeping XY mech mode" -msgstr "XY軸特性を測定" +msgid "Vibration compensation" +msgstr "" msgid "Changing filament" msgstr "フィラメントを交換" @@ -3653,14 +3869,14 @@ msgstr "フィラメントを交換" msgid "M400 pause" msgstr "M400一時停止" -msgid "Paused due to filament runout" -msgstr "フィラメント切れにより一時停止" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "ヘッドを加熱" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "押出キャリブレーション" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "ベッド表面を検査" @@ -3683,78 +3899,138 @@ msgstr "ノズル先端をクリーニング" msgid "Checking extruder temperature" msgstr "押出機温度を確認" -msgid "Printing was paused by the user" -msgstr "ユーザにより一時停止" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "フロントカバーの脱落により一時停止" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "ライダー キャリブレーション" -msgid "Calibrating extrusion flow" -msgstr "押出流量キャリブレーション" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "ノズル温度異常により一時停止" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "ベッド温度異常により一時停止" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" -msgstr "Filament unloading" +msgstr "" -msgid "Skip step pause" -msgstr "Skip step pause" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" -msgstr "Filament loading" +msgstr "" -msgid "Motor noise calibration" -msgstr "Motor noise calibration" +msgid "Motor noise cancellation" +msgstr "" -msgid "Paused due to AMS lost" -msgstr "Paused due to AMS lost" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Paused due to low speed of the heat break fan" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Paused due to chamber temperature control error" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" -msgstr "Cooling chamber" +msgstr "" -msgid "Paused by the Gcode inserted by user" -msgstr "Paused by the Gcode inserted by user" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" -msgstr "Motor noise showoff" +msgstr "" -msgid "Nozzle filament covered detected pause" -msgstr "Nozzle filament covered detected pause" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Cutter error pause" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "First layer error pause" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Nozzle clog pause" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "不明" -msgid "Fatal" -msgstr "重大的" - -msgid "Serious" -msgstr "重大な" - -msgid "Common" -msgstr "共通" - msgid "Update successful." msgstr "更新は完了しました。" @@ -3767,72 +4043,137 @@ msgstr "認証失敗" msgid "Update failed." msgstr "更新が失敗しました。" -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/" -"TPU) is not allowed to be loaded." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." msgstr "" -"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order " -"to avoid extruder clogging, it is not allowed to set the chamber temperature " -"above 45℃." msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" + +msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " "control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." +msgstr "" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "造形タスクを開始できませんでした" msgid "" "This calibration does not support the currently selected nozzle diameter" msgstr "" -"This calibration does not support the currently selected nozzle diameter" msgid "Current flowrate cali param is invalid" -msgstr "Current flowrate cali param is invalid" +msgstr "" msgid "Selected diameter and machine diameter do not match" -msgstr "Selected diameter and machine diameter do not match" +msgstr "" -msgid "Failed to generate cali gcode" -msgstr "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" +msgstr "" msgid "Calibration error" -msgstr "Calibration error" - -msgid "TPU is not supported by AMS." -msgstr "TPU is not supported by the AMS." - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF is not supported by the AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." msgstr "" -"Damp PVA will become flexible and get stuck inside the AMS; please take care " -"to dry it well before use." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume Printing" +msgstr "" + +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "ロード" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "" + +msgid "Retry" +msgstr "再試行" + +msgid "Resume" +msgstr "再開" + +msgid "Unknown error." msgstr "" -"CF/GF filaments are hard and brittle, so they can easily break or get stuck " -"in an AMS; please use with caution." msgid "default" msgstr "デフォルト" @@ -3844,7 +4185,7 @@ msgstr "カスタムG-コードの編集(%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "組込みプレースホルダー (アイテムをダブルクリックして G コードに追加)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3885,7 +4226,7 @@ msgid "Specific for %1%" msgstr "%1%に固有" msgid "Presets" -msgstr "Presets" +msgstr "" msgid "Print settings" msgstr "造形設定" @@ -3903,7 +4244,7 @@ msgid "parameter name" msgstr "パラメータ名" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s をパーセンテージにすることはできません" #, c-format, boost-format @@ -3915,7 +4256,7 @@ msgstr "パラメータ検証" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "" msgid "Value is out of range." msgstr "値が範囲外です。" @@ -3941,10 +4282,27 @@ msgstr "入力値が範囲を超えています" msgid "Some extension in the input is invalid" msgstr "入力の一部の拡張子が無効" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "無効なフォーマット、%1%であるはずです。" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "積層ピッチ" @@ -3954,9 +4312,6 @@ msgstr "押出線幅" msgid "Fan Speed" msgstr "ファン回転速度" -msgid "Temperature" -msgstr "温度" - msgid "Flow" msgstr "流量" @@ -3990,7 +4345,7 @@ msgstr "ファン回転速度" msgid "Temperature: " msgstr "温度" -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "G-codeを読み込み" msgid "Generating geometry vertex data" @@ -4000,7 +4355,7 @@ msgid "Generating geometry index data" msgstr "ジオメトリ・インデックス・データを生成" msgid "Statistics of All Plates" -msgstr "Statistics of All Plates" +msgstr "" msgid "Display" msgstr "表示" @@ -4009,7 +4364,7 @@ msgid "Flushed" msgstr "フラッシュ" msgid "Tower" -msgstr "Tower" +msgstr "" msgid "Total" msgstr "合計" @@ -4021,7 +4376,73 @@ msgid "Total time" msgstr "総時間" msgid "Total cost" -msgstr "Total cost" +msgstr "" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "ヒント" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "ヒント" msgid "up to" msgstr "最大" @@ -4030,19 +4451,13 @@ msgid "above" msgstr "以上" msgid "from" -msgstr "from" - -msgid "Color Scheme" -msgstr "配色スキーム" +msgstr "" msgid "Time" msgstr "時間" -msgid "Percent" -msgstr "％" - -msgid "Used filament" -msgstr "フィラメント使用量" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "積層ピッチ(mm)" @@ -4089,12 +4504,12 @@ msgstr "移動" msgid "Extruder" msgstr "押出機" -msgid "Filament change times" -msgstr "フィラメント交換回数" - msgid "Cost" msgstr "コスト" +msgid "Filament change times" +msgstr "フィラメント交換回数" + msgid "Color change" msgstr "色変更" @@ -4104,10 +4519,7 @@ msgstr "造形する" msgid "Printer" msgstr "プリンター" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -4117,10 +4529,10 @@ msgid "Normal mode" msgstr "通常モード" msgid "Total Filament" -msgstr "Total Filament" +msgstr "" msgid "Model Filament" -msgstr "Model Filament" +msgstr "" msgid "Prepare time" msgstr "準備時間" @@ -4134,6 +4546,19 @@ msgstr "サイレントモードに切り替える" msgid "Switch to normal mode" msgstr "通常モードに切り替え" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "可変積層ピッチ" @@ -4152,27 +4577,15 @@ msgstr "半径" msgid "Keep min" msgstr "最小限に抑える" -msgid "Left mouse button:" -msgstr "マウス左ボタン" - msgid "Add detail" msgstr "詳細を追加" -msgid "Right mouse button:" -msgstr "マウス右ボタン" - msgid "Remove detail" msgstr "詳細を削除" -msgid "Shift + Left mouse button:" -msgstr "Shift + マウス左ボタン" - msgid "Reset to base" msgstr "ベースにリセット" -msgid "Shift + Right mouse button:" -msgstr "Shift + マウス右ボタン" - msgid "Smoothing" msgstr "スムージング" @@ -4185,6 +4598,55 @@ msgstr "編集領域を拡大/縮小" msgid "Sequence" msgstr "順番" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "オブジェクトを反転" @@ -4192,7 +4654,7 @@ msgid "Tool Move" msgstr "ツール 移動" msgid "Tool Rotate" -msgstr "Tool Rotate" +msgstr "" msgid "Move Object" msgstr "オブジェクトを移動" @@ -4216,7 +4678,7 @@ msgid "Spacing" msgstr "間隔" msgid "0 means auto spacing." -msgstr "0 means auto spacing." +msgstr "" msgid "Auto rotate for arrangement" msgstr "自動回転" @@ -4228,13 +4690,27 @@ msgid "Avoid extrusion calibration region" msgstr "押出しキャリブレーション領域を避ける" msgid "Align to Y axis" -msgstr "Align to Y axis" +msgstr "" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "追加" msgid "Add plate" msgstr "プレートを追加" -msgid "Auto orient" -msgstr "自動向き調整" +msgid "Auto orient all/selected objects" +msgstr "すべてのオブジェクト/選択したオブジェクトの方向を自動設定する" + +msgid "Auto orient all objects on current plate" +msgstr "現在のプレート上のすべてのオブジェクトを自動で方向付ける" msgid "Arrange all objects" msgstr "全てをレイアウト" @@ -4254,12 +4730,30 @@ msgstr "組立て" msgid "Select Plate" msgstr "プレートを選択" +msgid "Slicing" +msgstr "スライス中" + +msgid "Slice all" +msgstr "スライス (全プレート)" + +msgid "Failed" +msgstr "失敗" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "戻る" -msgid "return" +msgid "Return" msgstr "戻る" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "ペイント ツールバー" @@ -4272,6 +4766,9 @@ msgstr "断面" msgid "Assemble Control" msgstr "組立て" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "消費量" @@ -4286,29 +4783,69 @@ msgstr "サイズ:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "プレートの境界を超えるオブジェクトがあります" msgid "A G-code path goes beyond the max print height." -msgstr "A G-code path goes beyond the max print height." +msgstr "" -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "G-codeはプレートの境界を超えています。" -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "編集中のオブジェクトのみ表示されます" -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"プレートの境界を越えるか、高さ制限を超えるオブジェクトがあります、ご確認くだ" -"さい" msgid "Calibration step selection" msgstr "キャリブレーション項目を選択" @@ -4319,11 +4856,8 @@ msgstr "ライダー キャリブレーション" msgid "Bed leveling" msgstr "ベッドレベリング" -msgid "Vibration compensation" -msgstr "Vibration compensation" - -msgid "Motor noise cancellation" -msgstr "Motor noise cancellation" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "キャリブレーション項目" @@ -4349,7 +4883,7 @@ msgid "Calibrating" msgstr "キャリブレーション中" msgid "No step selected" -msgstr "No step selected" +msgstr "" msgid "Auto-record Monitoring" msgstr "自動録画モニタリング" @@ -4358,7 +4892,7 @@ msgid "Go Live" msgstr "公開" msgid "Liveview Retry" -msgstr "Liveview Retry" +msgstr "" msgid "Resolution" msgstr "分解能" @@ -4375,23 +4909,21 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "「ライブビュー」ガイドを表示" -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "プリンターとの接続（LAN）" msgid "Please input the printer access code:" msgstr "アクセスコードを入力してください" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"下記の図面の様に、プリンターの設定→ネットワーク→アクセスコードで確認できます" msgid "Invalid input." msgstr "無効な入力" @@ -4411,9 +4943,15 @@ msgstr "プリセットが変更されたが終了します" msgid "Logging" msgstr "ログ" +msgid "Prepare" +msgstr "準備" + msgid "Preview" msgstr "プレビュー" +msgid "Device" +msgstr "デバイス" + msgid "Multi-device" msgstr "Multi-device" @@ -4427,7 +4965,7 @@ msgid "No" msgstr "いいえ" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "will be closed before creating a new model. Do you want to continue?" +msgstr "" msgid "Slice plate" msgstr "スライス" @@ -4435,12 +4973,12 @@ msgstr "スライス" msgid "Print plate" msgstr "造形開始" -msgid "Slice all" -msgstr "スライス (全プレート)" - msgid "Export G-code file" msgstr "G-codeをエクスポート" +msgid "Send" +msgstr "送信" + msgid "Export plate sliced file" msgstr "エクスポート" @@ -4453,6 +4991,9 @@ msgstr "造形開始 (全プレート)" msgid "Send all" msgstr "送信 (全プレート)" +msgid "Send to Multi-device" +msgstr "" + msgid "Keyboard Shortcuts" msgstr "ショートカット" @@ -4487,10 +5028,6 @@ msgstr "モデルをダウンロード" msgid "Default View" msgstr "デフォルトビュー" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "トップ" - msgid "Top View" msgstr "トップ" @@ -4513,15 +5050,9 @@ msgstr "背面" msgid "Rear View" msgstr "背面" -msgid "Left" -msgstr "左面" - msgid "Left View" msgstr "左面" -msgid "Right" -msgstr "右面" - msgid "Right View" msgstr "右面" @@ -4537,8 +5068,8 @@ msgstr "新しいプロジェクトで始める" msgid "Open a project file" msgstr "プロジェクトファイルを開く" -msgid "Recent projects" -msgstr "最近のプロジェクト" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "プロジェクトを保存" @@ -4549,9 +5080,6 @@ msgstr "現在のプロジェクトを保存" msgid "Save Project as" msgstr "プロジェクトを名前を付けて保存" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "プロジェクトを名前を付けて保存" @@ -4577,15 +5105,15 @@ msgid "Import" msgstr "インポート" msgid "Export all objects as one STL" -msgstr "Export all objects as one STL" +msgstr "" msgid "Export all objects as STLs" -msgstr "Export all objects as STLs" +msgstr "" msgid "Export Generic 3MF" msgstr "汎用3MF" -msgid "Export 3mf file without using some 3mf-extensions" +msgid "Export 3MF file without using some 3mf-extensions" msgstr "3mfファイルをエクスポート（一部3mf機能を無効）" msgid "Export current sliced file" @@ -4600,9 +5128,12 @@ msgstr "G-codeをエクスポート" msgid "Export current plate as G-code" msgstr "現在のプレートをG-codeでエクスポート" -msgid "Export Preset Bundle" +msgid "Export toolpaths as OBJ" msgstr "" +msgid "Export Preset Bundle" +msgstr "プリセットバンドルをエクスポート" + msgid "Export current configuration to files" msgstr "現在の構成をエクスポート" @@ -4651,6 +5182,12 @@ msgstr "選択したオブジェクトを複製" msgid "Clone copies of selections" msgstr "選択したオブジェクトを複製" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "全てを選択" @@ -4669,16 +5206,24 @@ msgstr "パースペクティブを使用" msgid "Use Orthogonal View" msgstr "直交投影を使用" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4690,65 +5235,92 @@ msgstr "" msgid "Show &Labels" msgstr "ラベルを表示" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "3Dシーンにラベルを表示" msgid "Show &Overhang" -msgstr "Show &Overhang" +msgstr "" -msgid "Show object overhang highlight in 3D scene" -msgstr "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." +msgstr "" + +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." +msgstr "" msgid "Preferences" msgstr "設定" +msgid "View" +msgstr "表示" + msgid "Help" msgstr "ヘルプ" msgid "Temperature Calibration" -msgstr "Temperature Calibration" +msgstr "" msgid "Pass 1" -msgstr "Pass 1" +msgstr "" msgid "Flow rate test - Pass 1" -msgstr "Flow rate test - Pass 1" +msgstr "" msgid "Pass 2" -msgstr "Pass 2" +msgstr "" msgid "Flow rate test - Pass 2" -msgstr "Flow rate test - Pass 2" +msgstr "" + +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" msgid "Flow rate" -msgstr "Flow rate" +msgstr "" msgid "Pressure advance" -msgstr "Pressure advance" +msgstr "" msgid "Retraction test" -msgstr "Retraction test" - -msgid "Orca Tolerance Test" -msgstr "Orca Tolerance Test" +msgstr "" msgid "Max flowrate" -msgstr "Max flowrate" +msgstr "" + +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" msgid "VFA" -msgstr "VFA" - -msgid "More..." -msgstr "More..." +msgstr "" msgid "Tutorial" -msgstr "Tutorial" +msgstr "" msgid "Calibration help" -msgstr "Calibration help" - -msgid "More calibrations" -msgstr "More calibrations" +msgstr "" msgid "&Open G-code" msgstr "G-codeを開く" @@ -4763,10 +5335,7 @@ msgid "Reload the plater from disk" msgstr "プレートを再読込み" msgid "Export &Toolpaths as OBJ" -msgstr "Export &Toolpaths as OBJ" - -msgid "Export toolpaths as OBJ" -msgstr "Export toolpaths as OBJ" +msgstr "" msgid "Open &Slicer" msgstr "Studioを開く" @@ -4791,16 +5360,19 @@ msgid "&Help" msgstr "ヘルプ" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "A file exists with the same name: %s. Do you want to override it?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "A config exists with the same name: %s. Do you want to override it?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "" msgid "Overwrite file" msgstr "ファイルを上書き" +msgid "Overwrite config" +msgstr "" + msgid "Yes to All" msgstr "全ては[はい]" @@ -4846,7 +5418,7 @@ msgid "Filament Settings" msgstr "フィラメント設定" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4861,56 +5433,51 @@ msgid "Synchronization" msgstr "同期" msgid "The device cannot handle more conversations. Please retry later." -msgstr "The device cannot handle more conversations. Please retry later." +msgstr "" msgid "Player is malfunctioning. Please reinstall the system player." -msgstr "Player is malfunctioning. Please reinstall the system player." +msgstr "" msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "The player is not loaded; please click the \"play\" button to retry." +msgstr "" msgid "Please confirm if the printer is connected." -msgstr "Please confirm if the printer is connected." +msgstr "" msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." msgstr "" -"The printer is currently busy downloading. Please try again after it " -"finishes." msgid "Printer camera is malfunctioning." -msgstr "Printer camera is malfunctioning." +msgstr "" -msgid "Problem occured. Please update the printer firmware and try again." -msgstr "A problem occurred. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "" msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." msgid "Please enter the IP of printer to connect." -msgstr "Please enter the IP of the printer to connect." +msgstr "" msgid "Initializing..." msgstr "初期化中..." msgid "Connection Failed. Please check the network and try again" -msgstr "Connection Failed. Please check the network and try again" +msgstr "" msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "" "Please check the network and try again. You can restart or update the " "printer if the issue persists." +msgstr "" msgid "The printer has been logged out and cannot connect." -msgstr "The printer has been logged out and cannot connect." +msgstr "" -msgid "Stopped." -msgstr "中止しました" +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN接続失敗 (ライブビュー開始失敗)" @@ -4944,6 +5511,9 @@ msgstr "情報" msgid "Playing..." msgstr "再生中..." +msgid "Loading..." +msgstr "読込み中" + msgid "Year" msgstr "年" @@ -4962,6 +5532,9 @@ msgstr "月でグループ化、新しい順で並べ替え" msgid "Show all files, recent first." msgstr "全てのファイルを表示" +msgid "Timelapse" +msgstr "タイムラプス" + msgid "Switch to timelapse files." msgstr "タイムラプスに切替え" @@ -4971,8 +5544,8 @@ msgstr "ビデオ" msgid "Switch to video files." msgstr "ビデオファイルに切替え" -msgid "Switch to 3mf model files." -msgstr "Switch to 3mf model files." +msgid "Switch to 3MF model files." +msgstr "" msgid "Delete selected files from printer." msgstr "プリンターから選択したファイルを削除" @@ -4993,15 +5566,11 @@ msgid "Refresh" msgstr "再読込" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "" msgid "No printers." msgstr "プリンタなし" -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "接続に失敗しました (%d)" - msgid "Loading file list..." msgstr "ファイルリストを読込み中" @@ -5009,30 +5578,18 @@ msgid "No files" msgstr "ファイル無し" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "Initialization failed (Device connection not ready)!" +msgstr "" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "初期化失敗 (%s)" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5041,27 +5598,27 @@ msgid_plural "" msgstr[0] "" msgid "Delete files" -msgstr "Delete files" +msgstr "" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Do you want to delete the file '%s' from printer?" +msgstr "" msgid "Delete file" -msgstr "Delete file" +msgstr "" -msgid "Fetching model infomations ..." -msgstr "Fetching model information..." +msgid "Fetching model information..." +msgstr "" msgid "Failed to fetch model information from printer." -msgstr "Failed to fetch model information from printer." +msgstr "" msgid "Failed to parse model information." -msgstr "Failed to parse model information." +msgstr "" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" #, c-format, boost-format @@ -5073,8 +5630,6 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" msgid "Download waiting..." msgstr "ダウンロード待ち" @@ -5092,28 +5647,66 @@ msgstr "ダウンロード完了" msgid "Downloading %d%%..." msgstr "ダウンロード中 %d%%" +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." -msgstr "File does not exist." +msgstr "" msgid "File checksum error. Please retry." -msgstr "File checksum error. Please retry." +msgstr "" msgid "Not supported on the current printer version." -msgstr "Not supported on the current printer version." +msgstr "" -msgid "Storage unavailable, insert SD card." -msgstr "Storage unavailable; please insert MicroSD card." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" -msgstr "Error code: %d" +msgstr "" + +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" msgid "Speed:" msgstr "速度" @@ -5154,14 +5747,87 @@ msgstr "" msgid "Invert Roll axis" msgstr "" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "" + +msgid "My Device" +msgstr "私のデバイス" + +msgid "Other Device" +msgstr "その他のデバイス" + +msgid "Online" +msgstr "オンライン" + +msgid "Input access code" +msgstr "アクセスコードを入力" + +msgid "Can't find my devices?" +msgstr "デバイスが見つからない？" + +msgid "Log out successful." +msgstr "サインアウトしました" + +msgid "Offline" +msgstr "オフライン" + +msgid "Busy" +msgstr "ビジー状態" + +msgid "Modifying the device name" +msgstr "デバイス名を変更" + +msgid "Name is invalid;" +msgstr "名称が無効です" + +msgid "illegal characters:" +msgstr "無効な文字:" + +msgid "illegal suffix:" +msgstr "無効なサフィックス" + +msgid "The name is not allowed to be empty." +msgstr "「名前」が空です" + +msgid "The name is not allowed to start with space character." +msgstr "名前の先頭にスペースを入れないでください" + +msgid "The name is not allowed to end with space character." +msgstr "名前の最後にスペースを入れないでください" + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "" + +msgid "Bind with Access Code" +msgstr "アクセスコードと紐付け" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "進捗" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "中止" msgid "Layer: N/A" -msgstr "Layer: N/A" +msgstr "" msgid "Clear" msgstr "クリア" @@ -5170,27 +5836,23 @@ msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"You have completed printing the mall model, \n" -"but synchronizing rating information has failed." msgid "How do you like this printing file?" -msgstr "How do you like this printing file?" +msgstr "" msgid "" "(The model has already been rated. Your rating will overwrite the previous " "rating.)" msgstr "" -"(The model has already been rated. Your rating will overwrite the previous " -"rating.)" msgid "Rate" -msgstr "Rate" +msgstr "" msgid "Camera" msgstr "カメラ" -msgid "SD Card" -msgstr "SDカード" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "カメラ設定" @@ -5202,40 +5864,46 @@ msgid "Control" msgstr "コントロール" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "" msgid "Print Options" msgstr "造型オプション" -msgid "100%" -msgstr "100％" - msgid "Lamp" msgstr "照明" -msgid "Aux" -msgstr "補助" - -msgid "Cham" -msgstr "筐体" - msgid "Bed" msgstr "ベッド" msgid "Debug Info" msgstr "デバッグ情報" -msgid "No SD Card" -msgstr "SDカードなし" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SDカードに異常があります。" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "造形を取消し" -msgid "Are you sure you want to cancel this print?" -msgstr "現在の造形をキャンセルしても宜しいでしょうか？" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "プリンターはビジーです。" + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "ダウンロード中" @@ -5245,28 +5913,24 @@ msgstr "クラウドにてスライス中" #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "In Cloud Slicing Queue, there are %s tasks ahead of you." +msgstr "" #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." -msgid "Still unload" -msgstr "アンロード" - -msgid "Still load" -msgstr "ロード" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "キャリブレーション前に、AMSスロットを選択してください" @@ -5293,122 +5957,127 @@ msgstr "スポーツ" msgid "Ludicrous" msgstr "超高速" -msgid "Can't start this without SD card." -msgstr "起動するのにSDカードが必要です。" +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" -msgstr "Rate the Print Profile" +msgstr "" msgid "Comment" -msgstr "Comment" +msgstr "" msgid "Rate this print" -msgstr "Rate this print" +msgstr "" msgid "Add Photo" -msgstr "Add Photo" +msgstr "" msgid "Delete Photo" -msgstr "Delete Photo" +msgstr "" msgid "Submit" -msgstr "Submit" +msgstr "" msgid "Please click on the star first." -msgstr "Please click on the star first." - -msgid "InFo" -msgstr "Info" +msgstr "" msgid "Get oss config failed." -msgstr "Get oss config failed." +msgstr "" -msgid "Upload Pictrues" -msgstr "Upload Pictures" +msgid "Upload Pictures" +msgstr "" msgid "Number of images successfully uploaded" -msgstr "Number of images successfully uploaded" +msgstr "" msgid " upload failed" -msgstr " upload failed" +msgstr "" msgid " upload config prase failed\n" -msgstr " upload config prase failed\n" +msgstr "" msgid " No corresponding storage bucket\n" -msgstr " No corresponding storage bucket\n" +msgstr "" -msgid " can not be opened\n" -msgstr " cannot be opened\n" +msgid " cannot be opened\n" +msgstr "" msgid "" "The following issues occurred during the process of uploading images. Do you " "want to ignore them?\n" "\n" msgstr "" -"The following issues occurred during the process of uploading images. Do you " -"want to ignore them?\n" -"\n" msgid "info" msgstr "情報" msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "Synchronizing the printing results. Please retry a few seconds later." +msgstr "" msgid "Upload failed\n" -msgstr "Upload failed\n" +msgstr "" msgid "obtaining instance_id failed\n" -msgstr "obtaining instance_id failed\n" +msgstr "" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " +msgstr "" msgid "error message: " -msgstr "error message: " +msgstr "" msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" "Would you like to redirect to the webpage to give a rating?" +msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" -"Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" msgid "You can select up to 16 images." -msgstr "You can select up to 16 images." +msgstr "" msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." -msgstr "" -"At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." +msgstr "" msgid "Status" msgstr "デバイス状態" +msgctxt "Firmware" msgid "Update" -msgstr "更新" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "次回から表示しない" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s エラー" @@ -5436,11 +6105,12 @@ msgstr "%s 情報" msgid "Skip" msgstr "スキップ" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "新3mfバージョン" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5448,22 +6118,45 @@ msgid "If you would like to try Snapmaker Orca Beta, you may click to" msgstr "" msgid "Download Beta Version" -msgstr "Download Beta Version" - -msgid "The 3mf file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "" + +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " -msgstr "Current Version: " +msgstr "" msgid "Latest Version: " -msgstr "Latest Version: " +msgstr "" + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" -msgstr "Not for now" +msgstr "" + +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" msgid "3D Mouse disconnected." msgstr "3D Mouseが切断されました。" @@ -5490,7 +6183,7 @@ msgid "Details" msgstr "詳細" msgid "New printer config available." -msgstr "New printer config available." +msgstr "" msgid "Wiki" msgstr "Wiki" @@ -5511,7 +6204,7 @@ msgid "Open Folder." msgstr "フォルダを開く" msgid "Safely remove hardware." -msgstr "Safely remove hardware." +msgstr "" #, c-format, boost-format msgid "%1$d Object has custom supports." @@ -5525,7 +6218,12 @@ msgstr[0] "%1$dのオブジェクトは色が付いています" #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgid "ERROR" @@ -5549,14 +6247,14 @@ msgstr "エラー:" msgid "Warning:" msgstr "警告" -msgid "Export successfully." +msgid "Exported successfully" msgstr "エクスポートが成功しました。" msgid "Model file downloaded." -msgstr "Model file downloaded." +msgstr "" msgid "Serious warning:" -msgstr "Serious warning:" +msgstr "" msgid " (Repair)" msgstr " (修復)" @@ -5567,11 +6265,11 @@ msgstr "こちらでインストールします。" msgid "WARNING:" msgstr "警告" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "このモデルを造形するにはサポートが必要です、サポートを有効にしてください" -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "G-codeにパスのオーバーラップがあります" msgid "Support painting" @@ -5581,7 +6279,7 @@ msgid "Color painting" msgstr "色塗り" msgid "Cut connectors" -msgstr "Cut connectors" +msgstr "" msgid "Layers" msgstr "積層" @@ -5619,12 +6317,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "底面" -msgid "Enable AI monitoring of printing" -msgstr "AI モニタリングを有効" - -msgid "Sensitivity of pausing is" -msgstr "感度" - msgid "Enable detection of build plate position" msgstr "プレート位置検出を有効" @@ -5633,36 +6325,107 @@ msgid "" "the tag is not in predefined range." msgstr "タグが検出されない場合、造形を停止する場合があります。" +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "AI モニタリングを有効" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "1層目検査" msgid "Auto-recovery from step loss" msgstr "自動回復" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" -msgstr "Allow Prompt Sound" +msgstr "" msgid "Filament Tangle Detect" -msgstr "Filament Tangle Detection" - -msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "ノズルタイプ" -msgid "Stainless Steel" -msgstr "Stainless Steel" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" -msgstr "Hardened Steel" +msgstr "" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "全般" @@ -5697,6 +6460,9 @@ msgstr "" msgid "Lock current plate" msgstr "" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5706,6 +6472,31 @@ msgstr "" msgid "Customize current plate" msgstr "" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr "プレート%1%:" @@ -5734,14 +6525,67 @@ msgstr "予測時間" msgid "Filament changes" msgstr "フィラメント交換" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "プリセットを編集" msgid "Connection" msgstr "接続" -msgid "Bed type" -msgstr "プレート" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "フラッシュ量" @@ -5759,47 +6603,33 @@ msgid "Set filaments to use" msgstr "フィラメントを選択" msgid "Search plate, object and part." -msgstr "Search plate, object and part." +msgstr "" msgid "Pellets" msgstr "" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"AMSにフィラメントがありません、「デバイス」ページでプリンターを選択し、AMS情" -"報をロードしてください。" + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "適用できるフィラメントがありません、同期を行えません" msgid "Sync filaments with AMS" msgstr "AMSと同期" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"AMSと同期する場合、現在のフィラメント設定が上書きされます。続行しますか？" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Already did a synchronization; do you want to sync only changes or resync " -"all?" - -msgid "Sync" -msgstr "Sync" - -msgid "Resync" -msgstr "Resync" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "適用できるフィラメントがありません、同期を行えません" - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "不明なフィラメントがあります、Snapmaker Orcaを更新してください。" #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -5807,13 +6637,13 @@ msgstr "変更を\"%1%\"に保存しますか？" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "デバイス %s(%s)をお取出しできます" #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "デバイス %s(%s) の取出しが失敗しました" +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "過去に保存されていない項目が検出されました。復元しますか？" @@ -5826,9 +6656,6 @@ msgid "" "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"The current heatbed temperature is relatively high. The nozzle may clog when " -"printing this filament in a closed environment. Please open the front door " -"and/or remove the upper glass." msgid "" "The nozzle hardness required by the filament is higher than the default " @@ -5842,8 +6669,11 @@ msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " "It is recommended to change to smooth mode." msgstr "" -"Enabling traditional timelapse photography may cause surface imperfections. " -"It is recommended to change to smooth mode." + +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" msgid "Expand sidebar" msgstr "サイドバーを展開" @@ -5851,21 +6681,37 @@ msgstr "サイドバーを展開" msgid "Collapse sidebar" msgstr "サイドバーを折りたたむ" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "ファイルを読込む: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" "この3mfファイルと互換性がありません、ジオメトリーデータのみ読込みます。" -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "3mfを読込み" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" "3mfのバージョン %s は %sのバージョン %sより新しい為、下記のキーを認識できませ" "ん" @@ -5873,53 +6719,60 @@ msgstr "" msgid "You'd better upgrade your software.\n" msgstr "ソフトウェアをアップデートする必要があります。\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" "3mfのバージョン%sは%sの%sより新しい為、ソフトウェアを更新してください。" -msgid "Invalid values found in the 3mf:" -msgstr "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"3mfは古いバージョンのSnapmaker Orcaで作成されています、ジオメトリーデータのみ" +"読込みます。" + + +msgid "Invalid values found in the 3MF:" +msgstr "" msgid "Please correct them in the param tabs" -msgstr "Please correct them in the Param tabs" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "The 3mf has following modified G-code in filament or printer presets:" +msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" - -msgid "Modified G-codes" -msgstr "Modified G-code" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "The 3mf has following customized filament or printer presets:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "" + +msgid "Modified G-code" +msgstr "" + +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "" + +msgid "" +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Please confirm that the G-codes within these presets are safe to prevent any " -"damage to the machine!" msgid "Customized Preset" -msgstr "Customized Preset" +msgstr "" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "ファイルのエンコーディング方式はUTF8形式ではありません" msgid "The name may show garbage characters!" msgstr "文字化けがあるようです、ご確認ください" msgid "Remember my choice." -msgstr "Remember my choice." +msgstr "" #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." @@ -5960,12 +6813,22 @@ msgstr "これらのファイルを一つのオブジェクトとしてロード msgid "Object with multiple parts was detected" msgstr "複数のパーツを含むオブジェクトが検出されました" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "このファイルにはジオメトリデータが含まれていません。" msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "オブジェクトが大きすぎのようです、ベッドに合わせてスケールしますか？" msgid "Object too large" @@ -5975,36 +6838,31 @@ msgid "Export STL file:" msgstr "STLファイルをエクスポート:" msgid "Export AMF file:" -msgstr "Export AMF file:" +msgstr "" msgid "Save file as:" msgstr "名前を付けて保存" msgid "Export OBJ file:" -msgstr "Export OBJ file:" +msgstr "" #, c-format, boost-format msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" -"The file %s already exists.\n" -"Do you want to replace it?" msgid "Confirm Save As" -msgstr "Confirm Save As" +msgstr "" msgid "Delete object which is a part of cut object" -msgstr "Delete object which is a part of cut object" +msgstr "" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"You are trying to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed." msgid "The selected object couldn't be split." msgstr "選択したオブジェクトを分割できませんでした。" @@ -6013,13 +6871,13 @@ msgid "Another export job is running." msgstr "エクスポート中です" msgid "Unable to replace with more than one volume" -msgstr "Unable to replace with more than one volume" +msgstr "" msgid "Error during replace" msgstr "交換時のエラー" msgid "Replace from:" -msgstr "Replace from:" +msgstr "" msgid "Select a new file" msgstr "ファイルを選択" @@ -6027,23 +6885,51 @@ msgstr "ファイルを選択" msgid "File for the replace wasn't selected" msgstr "交換用のファイルが選択されていません" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "ファイルを選択してください" msgid "Do you want to replace it" -msgstr "Do you want to replace it?" +msgstr "" msgid "Message" -msgstr "Message" +msgstr "" msgid "Reload from:" -msgstr "Reload from:" +msgstr "" msgid "Unable to reload:" -msgstr "Unable to reload:" +msgstr "" msgid "Error during reload" -msgstr "Error during reload" +msgstr "" msgid "There are warnings after slicing models:" msgstr "スライスの警告:" @@ -6072,11 +6958,22 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "プレビュー専用モード\n" "このファイルにはG-codeのみが入っており、「準備」ページで表示できません" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "変更したプリセットをプロジェクト内に保存するか、破棄もできます" @@ -6100,17 +6997,17 @@ msgstr "プロジェクトを保存" msgid "Importing Model" msgstr "モデルをインポート" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "3mfファイルを準備" msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "プロジェクトをダウンロード中" msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "" #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6121,13 +7018,23 @@ msgid "" "import it." msgstr "" +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "SLAアーカイブをインポート" msgid "The selected file" msgstr "選択したファイル" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "有効なG-codeが含まれていません。" msgid "Error occurs while loading G-code file" @@ -6166,10 +7073,10 @@ msgstr "G-codeファイルは一度一つしか開きません" msgid "G-code loading" msgstr "G-code読込み中" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G-codeファイルとモデルを一緒にロードできません" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "プレビューモードではモデルを追加できません" msgid "All objects will be removed, continue?" @@ -6189,13 +7096,13 @@ msgid "Save G-code file as:" msgstr "名前を付けて保存" msgid "Save SLA file as:" -msgstr "Save SLA file as:" +msgstr "" msgid "The provided file name is not valid." -msgstr "The provided file name is not valid." +msgstr "" msgid "The following characters are not allowed by a FAT file system:" -msgstr "The following characters are not allowed by a FAT file system:" +msgstr "" msgid "Save Sliced file as:" msgstr "名前を付けて保存:" @@ -6206,47 +7113,37 @@ msgid "" "on the printer." msgstr "%sを送信しました、プリンターにて確認できます" +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"オリジナルの SVG をローカル パスとともに 3MF ファイルに保存してもよろしいです" -"か?\n" -"「いいえ」を押すと、プロジェクト内のすべての SVG は編集できなくなります。" - -msgid "Private protection" -msgstr "プライベートプロテクション" msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6256,6 +7153,9 @@ msgstr "" msgid "Upload and Print" msgstr "アップロードとプリント" +msgid "Abnormal print file data. Please slice again" +msgstr "ファイルに異常があります、もう一度スライスしてください" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6274,21 +7174,46 @@ msgstr "" "モデルを変更すると、ペイントデータ（サポートや色など）がリセットされます" msgid "Optimize Rotation" +msgstr "回転の最適化" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." msgstr "" -msgid "Invalid number" -msgstr "無効な数字" +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" -msgstr "Plate Settings" +msgstr "" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Number of currently selected parts: %1%\n" +msgstr "" #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "Number of currently selected objects: %1%\n" +msgstr "" #, boost-format msgid "Part name: %1%\n" @@ -6318,9 +7243,6 @@ msgstr "ボリューム: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "三角形: %1% 個\n" -msgid "Tips:" -msgstr "ヒント" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6330,13 +7252,36 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Plate% d: %s is not suggested for use printing filament %s(%s). If you still " -"want to do this print job, please set this filament's bed temperature to a " -"number that is not zero." msgid "Switching the language requires application restart.\n" msgstr "言語を切り替えるには、再起動が必要です。\n" @@ -6353,18 +7298,51 @@ msgstr "アプリケーション言語を切り替える時に、プリセット msgid "Changing application language" msgstr "言語を変更" +msgid "Asia-Pacific" +msgstr "アジア太平洋地域" + +msgid "China" +msgstr "中国" + +msgid "Europe" +msgstr "ヨーロッパ地域" + +msgid "North America" +msgstr "北米" + +msgid "Others" +msgstr "その他" + msgid "Changing the region will log out your account.\n" msgstr "地域を変更すると、サインアウトする必要があります。\n" msgid "Region selection" msgstr "地域選択" -msgid "Second" -msgstr "秒" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "" + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "閲覧" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "ダウンロードフォルドを選択" @@ -6383,40 +7361,8 @@ msgstr "" msgid "Current Instance Path: " msgstr "" -msgid "General Settings" -msgstr "一般設定" - -msgid "Asia-Pacific" -msgstr "アジア太平洋地域" - -msgid "China" -msgstr "中国" - -msgid "Europe" -msgstr "ヨーロッパ地域" - -msgid "North America" -msgstr "北米" - -msgid "Others" -msgstr "その他" - -msgid "Login Region" -msgstr "地域" - -msgid "Stealth Mode" -msgstr "" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" - -msgid "Enable network plugin" -msgstr "" - -msgid "Check for stable updates only" -msgstr "" +msgid "General" +msgstr "一般" msgid "Metric" msgstr "メートル" @@ -6427,6 +7373,18 @@ msgstr "インチ" msgid "Units" msgstr "単位" +msgid "Home" +msgstr "ホーム" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Enable dark mode" +msgstr "ダークモードを有効" + msgid "Allow only one Snapmaker Orca instance" msgstr "" @@ -6435,9 +7393,6 @@ msgid "" "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"On OSX there is always only one instance of app running by default. However " -"it is allowed to run multiple instances of same app from the command line. " -"In such case this setting will allow only one instance." msgid "" "If this is enabled, when starting Snapmaker Orca and another instance of the " @@ -6445,13 +7400,103 @@ msgid "" "instead." msgstr "" -msgid "Home" -msgstr "ホーム" +msgid "Show splash screen" +msgstr "スプラッシュ画面を表示する" -msgid "Default Page" +msgid "Show the splash screen during startup." msgstr "" -msgid "Set the page opened on startup." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "自動バックアップ" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" + +msgid "Preset" +msgstr "" + +msgid "Remember printer configuration" +msgstr "" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "すべて" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" msgstr "" msgid "Touchpad" @@ -6466,15 +7511,19 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" -msgstr "Zoom to mouse position" +msgstr "" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." msgid "Use free camera" msgstr "フリーカメラを使用" @@ -6484,147 +7533,159 @@ msgstr "" "チェックすると、フリーカメラが使用されます。 そうでない場合は、拘束カメラを使" "用します。" -msgid "Reverse mouse zoom" +msgid "Swap pan and rotate mouse buttons" +msgstr "パンと回転のマウスボタンを入れ替える" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." msgstr "" +"有効にすると、マウスの左ボタンと右ボタンのパン機能と回転機能が入れ替わりま" +"す。" + +msgid "Reverse mouse zoom" +msgstr "マウスの逆ズーム" msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "有効にすると、マウス ホイールによるズームの方向が反転します。" + +msgid "Clear my choice on..." msgstr "" -msgid "Show splash screen" -msgstr "スプラッシュ画面を表示する" - -msgid "Show the splash screen during startup." +msgid "Unsaved projects" msgstr "" -msgid "Show \"Tip of the day\" notification after start" -msgstr "起動後「毎日のヒント」を表示" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "有効になる場合、起動時にヒントを表示されます。" - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Flushing volumes: Auto-calculate everytime the color changed." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "If enabled, auto-calculate every time the color changes." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" +msgid "Clear my choice on the unsaved projects." msgstr "" -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +msgid "Unsaved presets" msgstr "" -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" -msgstr "ネットワーク (&N)" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "ユーザープリセットの自動同期 (プリンター/フィラメント/プロセス)" - -msgid "User Sync" -msgstr "ユーザー同期" - -msgid "Update built-in Presets automatically." -msgstr "Update built-in presets automatically." - -msgid "System Sync" -msgstr "System Sync" - msgid "Clear my choice on the unsaved presets." -msgstr "Clear my choice on the unsaved presets." +msgstr "" + +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "地域" + +msgid "Stealth mode" +msgstr "" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" + +msgid "Network test" +msgstr "" + +msgid "Test" +msgstr "テスト" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "ユーザープリセットの自動同期 (プリンター/フィラメント/プロセス)" + +msgid "Update built-in Presets automatically." +msgstr "" + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" msgid "Associate files to Snapmaker Orca" msgstr "ファイルをSnapmaker Orcaに関連付ける" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr ".3mfファイルをSnapmaker Orcaに関連付けます。" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "デフォルトで.3mfファイルをSnapmaker Orcaで開く" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr ".stlファイルをSnapmaker Orcaに関連付けます。" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "デフォルトで.stlファイルをSnapmaker Orcaで開く" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr ".step/.stpファイルをSnapmaker Orcaに関連付けます。" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "デフォルトで.step/.stpファイルをSnapmaker Orcaで開く" msgid "Associate web links to Snapmaker Orca" msgstr "" -msgid "Associate URLs to Snapmaker Orca" +msgid "Developer" msgstr "" -msgid "Maximum recent projects" -msgstr "Maximum recent projects" - -msgid "Maximum count of recent projects" -msgstr "Maximum count of recent projects" - -msgid "Clear my choice on the unsaved projects." -msgstr "Clear my choice on the unsaved projects." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No warnings when loading 3MF with modified G-code" - -msgid "Auto-Backup" -msgstr "自動バックアップ" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Backup your project periodically to help with restoring from an occasional " -"crash." - -msgid "every" -msgstr "every" - -msgid "The peroid of backup in seconds." -msgstr "The period of backup in seconds." - -msgid "Downloads" -msgstr "ダウンロード" - -msgid "Dark Mode" -msgstr "ダークモード" - -msgid "Enable Dark mode" -msgstr "ダークモードを有効" - msgid "Develop mode" msgstr "開発者モード" msgid "Skip AMS blacklist check" -msgstr "Skip AMS blacklist check" +msgstr "" -msgid "Home page and daily tips" -msgstr "ホームページとヒント" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "起動時にホームページを表示" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "" + +msgid "fatal" +msgstr "重大的" + +msgid "error" +msgstr "エラー" + +msgid "warning" +msgstr "警告" + +msgid "debug" +msgstr "デバッグ" + +msgid "trace" +msgstr "トレース" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "同期設定" @@ -6657,31 +7718,13 @@ msgid "Mouse wheel reverses when zooming" msgstr "ズーム中にスクロール方向を反転させる" msgid "Enable SSL(MQTT)" -msgstr "Enable SSL(MQTT)" +msgstr "" msgid "Enable SSL(FTP)" -msgstr "Enable SSL(FTP)" +msgstr "" msgid "Internal developer mode" -msgstr "Internal developer mode" - -msgid "Log Level" -msgstr "Log Level" - -msgid "fatal" -msgstr "重大的" - -msgid "error" -msgstr "エラー" - -msgid "warning" -msgstr "警告" - -msgid "debug" -msgstr "デバッグ" - -msgid "trace" -msgstr "トレース" +msgstr "" msgid "Host Setting" msgstr "ホスト設定" @@ -6704,10 +7747,10 @@ msgstr "保存" msgid "save debug settings" msgstr "デバッグ設定を保存" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "デバッグ設定" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "クラウド環境を切り替えました、再度サインインしてください。" msgid "System presets" @@ -6719,14 +7762,20 @@ msgstr "ユーザープリセット" msgid "Incompatible presets" msgstr "互換性の無い プリセット" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMSフィラメント" -msgid "Click to pick filament color" -msgstr "フィラメントの色を選択" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Please choose the filament color" +msgid "Click to select filament color" +msgstr "フィラメントの色を選択" msgid "Add/Remove presets" msgstr "プリセットの追加/削除" @@ -6737,97 +7786,115 @@ msgstr "プリセットを編集" msgid "Project-inside presets" msgstr "プロジェクト プリセット" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "フィラメントを追加/削除" msgid "Add/Remove materials" msgstr "素材を追加/削除" -msgid "Select/Remove printers(system presets)" -msgstr "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" +msgstr "" msgid "Create printer" -msgstr "Create printer" +msgstr "" + +msgid "Empty" +msgstr "空" + +msgid "Incompatible" +msgstr "" msgid "The selected preset is null!" -msgstr "The selected preset is null!" +msgstr "" msgid "End" -msgstr "End" +msgstr "" msgid "Customize" -msgstr "Customize" +msgstr "" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "" msgid "Plate name" -msgstr "Plate name" +msgstr "" + +msgid "Same as Global Plate Type" +msgstr "" + +msgid "Bed type" +msgstr "プレート" msgid "Same as Global Print Sequence" -msgstr "Same as Global Print Sequence" +msgstr "" msgid "Print sequence" msgstr "造形シーケンス" msgid "Same as Global" -msgstr "Same as Global" +msgstr "" msgid "Disable" -msgstr "Disable" +msgstr "" msgid "Spiral vase" msgstr "スパイラル" msgid "First layer filament sequence" -msgstr "First layer filament sequence" - -msgid "Same as Global Plate Type" -msgstr "Same as Global Plate Type" +msgstr "" msgid "Same as Global Bed Type" msgstr "全般設定の「ベッドタイプ」と同様" msgid "By Layer" -msgstr "By Layer" +msgstr "" msgid "By Object" -msgstr "By Object" +msgstr "" msgid "Accept" -msgstr "Accept" +msgstr "" msgid "Log Out" -msgstr "Log Out" +msgstr "" msgid "Slice all plate to obtain time and filament estimation" msgstr "全プレートをスライスし、造形時間を推測します" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "プロジェクトデータを3MFファイルに書き込む" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "3mfをアップロード中" msgid "Jump to model publish web page" msgstr "モデル公開ページに移動" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "注意: 準備するには数分かかる場合があります、暫くお待ち下さい。" msgid "Publish" msgstr "公開する" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "公開は取り消しました" msgid "Slicing Plate 1" msgstr "プレート1をスライス" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "データを構成中" msgid "Jump to webpage" @@ -6846,7 +7913,7 @@ msgstr "プロジェクト プリセット" msgid "Name is unavailable." msgstr "名称は使用できません" -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "システムプロファイルの上書きはできません" #, boost-format @@ -6854,10 +7921,12 @@ msgid "Preset \"%1%\" already exists." msgstr "プリセット \"%1%\" は既に存在します。" #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "プリセット\"%1%\"は既に存在し、また互換性がありません。" -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "注意：現在のプリセットを上書きされます。" msgid "The name cannot be the same as a preset alias name." @@ -6893,38 +7962,11 @@ msgstr "\"%1%\"に切り替え" msgid "Task canceled" msgstr "タスクを取消しました" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Search" - -msgid "My Device" -msgstr "私のデバイス" - -msgid "Other Device" -msgstr "その他のデバイス" - -msgid "Online" -msgstr "オンライン" - -msgid "Input access code" -msgstr "アクセスコードを入力" - -msgid "Can't find my devices?" -msgstr "デバイスが見つからない？" - -msgid "Log out successful." -msgstr "サインアウトしました" - -msgid "Busy" -msgstr "ビジー状態" - msgid "Bambu Cool Plate" msgstr "Bambu 常温プレート" msgid "PLA Plate" -msgstr "PLA Plate" +msgstr "" msgid "Bambu Engineering Plate" msgstr "Bambu エンジニアリングプレート" @@ -6933,69 +7975,74 @@ msgid "Bambu Smooth PEI Plate" msgstr "" msgid "High temperature Plate" -msgstr "High temperature Plate" +msgstr "" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" -msgstr "造形タスクを送信" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "Flow Dynamics Calibration" +msgstr "" -msgid "Click here if you can't connect to the printer" -msgstr "Click here if you can't connect to the printer" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "送信完了" msgid "Error code" -msgstr "Error code" +msgstr "" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "アカウント無し、ローカルモードのプリンターのみが表示されます" - -msgid "Connecting to server" -msgstr "サーバーへ接続中" - -msgid "Synchronizing device information" -msgstr "デバイス情報を同期" - -msgid "Synchronizing device information time out" -msgstr "デバイス情報同期はタイムアウトしました" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "ファームウェアが更新中の為、造形タスクを送信できません" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "プリンターが指令を実行中です。実行終了してから造形を再開してください。" - -msgid "The printer is busy on other print job" -msgstr "プリンターはビジーです。" +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "フィラメント %s がAMSスロットの数を超えています。" - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "フィラメントがAMSスロットの数を超えています。" - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"フィラメントとAMSスロットをマッピングしました。マッピング関係を変更できます" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "フィラメントとAMSのスロットのマッピング関係を指定できます。" #, c-format, boost-format msgid "" @@ -7008,62 +8055,41 @@ msgid "" "firmware to support AMS slot assignment." msgstr "フィラメントがAMSスロットのフィラメントと一致していません。" -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "このプリンターはAMSスロットマッピングをサポートしません" - -msgid "An SD card needs to be inserted before printing." -msgstr "SDカードが必要です" - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "SDカードが必要です" - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "ファームウェアを更新する必要がある為、造形タスクを送信できません" - -msgid "Cannot send the print job for empty plate" -msgstr "空プレートがある為、送信できません" - -msgid "This printer does not support printing all plates" -msgstr "プリンターが全てのプレートを造形することができません" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"When spiral vase mode is enabled, machines with I3 structure will not " -"generate timelapse videos." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse is not supported because Print sequence is set to \"By object\"." msgid "Errors" msgstr "エラー" -msgid "Please check the following:" -msgstr "Please check the following:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " @@ -7073,109 +8099,260 @@ msgstr "" "不明なフィラメントがあります、造形に必要かどうかご確認ください。引き続き造形" "する場合は、「確認」を押してください。" -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "nozzle in preset: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "nozzle memorized: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." +msgid "Please check the following:" msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Please click the confirm button if you still want to proceed with printing." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Connecting to the printer. Unable to cancel during the connection process." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Caution! Flow calibration on Textured PEI Plates may fail due to the " -"scattered surface." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatic flow calibration using the Micro Lidar" +msgid "Preparing print job" +msgstr "造形タスクを準備" -msgid "Modifying the device name" -msgstr "デバイス名を変更" +msgid "The name length exceeds the limit." +msgstr "" -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "プリンターのSDカードに送信" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "アカウント無し、ローカルモードのプリンターのみが表示されます" + +msgid "Connecting to server..." +msgstr "サーバーへ接続中" + +msgid "Synchronizing device information..." +msgstr "デバイス情報を同期" + +msgid "Synchronizing device information timed out." +msgstr "デバイス情報同期はタイムアウトしました" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "ファームウェアが更新中の為、造形タスクを送信できません" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "プリンターが指令を実行中です。実行終了してから造形を再開してください。" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "ファームウェアを更新する必要がある為、造形タスクを送信できません" + +msgid "Cannot send a print job for an empty plate." +msgstr "空プレートがある為、送信できません" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "プリンターが全てのプレートを造形することができません" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "アップデート中では造形タスクを送信できません" msgid "The selected printer is incompatible with the chosen printer presets." -msgstr "The selected printer is incompatible with the chosen printer presets." - -msgid "An SD card needs to be inserted before send to printer SD card." msgstr "" -"A MicroSD card needs to be inserted before sending to the printer SD card." + +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" "このプリンターを使用するには、Snapmaker Orcaを同一のLANで使用してください。" -msgid "The printer does not support sending to printer SD card." -msgstr "このプリンターはSDカードに送信することができません" +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "スライス完了" msgid "View all Daily tips" -msgstr "View all Daily tips" +msgstr "" msgid "Failed to create socket" -msgstr "Failed to create socket" +msgstr "" msgid "Failed to connect socket" -msgstr "Failed to connect socket" +msgstr "" msgid "Failed to publish login request" -msgstr "Failed to publish login request" +msgstr "" msgid "Get ticket from device timeout" -msgstr "Timeout getting ticket from device" +msgstr "" msgid "Get ticket from server timeout" -msgstr "Timeout getting ticket from server" +msgstr "" msgid "Failed to post ticket to server" -msgstr "Failed to post ticket to server" +msgstr "" msgid "Failed to parse login report reason" -msgstr "Failed to parse login report reason" +msgstr "" msgid "Receive login report timeout" -msgstr "Receive login report timeout" +msgstr "" msgid "Unknown Failure" msgstr "不明な失敗" @@ -7184,63 +8361,56 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "" msgid "Pin Code" -msgstr "Pin Code" +msgstr "" msgid "Binding..." -msgstr "Binding..." +msgstr "" msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "" msgid "Log in printer" msgstr "プリンターを登録" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "現在のアカウントでプリンターをサインインしますか？" msgid "Check the reason" -msgstr "Check the reason" +msgstr "" msgid "Read and accept" -msgstr "Read and accept" +msgstr "" msgid "Terms and Conditions" -msgstr "Terms and Conditions" +msgstr "" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " "device, please read the terms and conditions. By clicking to agree to use " "your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " "Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" msgid "and" -msgstr "and" +msgstr "" msgid "Privacy Policy" -msgstr "Privacy Policy" +msgstr "" msgid "We ask for your help to improve everyone's printer" -msgstr "We ask for your help to improve everyone's printer" +msgstr "" msgid "Statement about User Experience Improvement Program" -msgstr "Statement about User Experience Improvement Program" +msgstr "" #, c-format, boost-format msgid "" @@ -7250,26 +8420,15 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." msgid "Statement on User Experience Improvement Plan" -msgstr "Statement on User Experience Improvement Plan" +msgstr "" msgid "Log in successful." msgstr "登録成功" @@ -7304,55 +8463,65 @@ msgid "Click to reset all settings to the last saved preset." msgstr "全ての変更をリセットします" msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "スムーズタイムラプスビデオを作成するにはプライムタワーが必要です。プライムタ" "ワーを有効にしますか？" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "スムーズタイムラプスビデオを作成するにはプライムタワーが必要です。プライムタ" "ワーを有効にしますか？" msgid "Still print by object?" -msgstr "Still print by object?" +msgstr "" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." -msgstr "ツリースリムはサポートの強度を弱めてフィラメントの消費量を減らします。" +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" +msgstr "" msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"これらの設定を自動的に変更しますか? \n" +"これらの設定を自動的に変更しますか?\n" "はい - 自動的に変更します\n" "いいえ - 変更しません" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"「ツリーストラング」と「ツリーハイブリッド」の場合、下記の設定をお勧めしま" -"す：接触層数を２、トップ面とのZ間隔を0.1mm。" - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"When using support material for the support interface, we recommend the " -"following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7363,6 +8532,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7370,41 +8547,31 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" -"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." -msgid "Adjust to the set range automatically? \n" -msgstr "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "" msgid "Adjust" -msgstr "Adjust" +msgstr "" msgid "Ignore" -msgstr "Ignore" +msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7416,6 +8583,80 @@ msgstr "" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" "ラプスプライムタワー」で追加できます。" +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"現在のシステムプリセットからコピーを作成し、システムプリセットから切り離しま" +"す。" + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "現在のカスタムプリセットは、親システムプリセットから切り離されます。" + +msgid "Modifications to the current profile will be saved." +msgstr "現在のプロファイルの編集が保存されます。" + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"このアクションは元に戻せません。\n" +"続行しますか？" + +msgid "Detach preset" +msgstr "プリセットを切り離す" + +msgid "This is a default preset." +msgstr "これはデフォルトのプリセットです。" + +msgid "This is a system preset." +msgstr "これはシステムプリセットです。" + +msgid "Current preset is inherited from the default preset." +msgstr "現在の設定はデフォルト設定から継承されます。" + +msgid "Current preset is inherited from" +msgstr "現在のプリセット継承元" + +msgid "It can't be deleted or modified." +msgstr "削除もしくは変更ができません。" + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"修正したら、これから継承された新しいプリセットとして保存する必要があります。" + +msgid "To do that please specify a new name for the preset." +msgstr "これを行うには、プリセットの新しい名前を指定してください。" + +msgid "Additional information:" +msgstr "追加情報:" + +msgid "vendor" +msgstr "メーカー" + +msgid "printer model" +msgstr "プリンターモデル" + +msgid "default print profile" +msgstr "デフォルトプリントプロファイル" + +msgid "default filament profile" +msgstr "デフォルトフィラメントプロファイル" + +msgid "default SLA material profile" +msgstr "デフォルトのSLA材料プロファイル" + +msgid "default SLA print profile" +msgstr "デフォルトのSLAプリントプロファイル" + +msgid "full profile name" +msgstr "完全なプロファイル名" + +msgid "symbolic profile name" +msgstr "シンボリック・プロファイル名" + msgid "Line width" msgstr "押出線幅" @@ -7473,7 +8714,7 @@ msgid "Acceleration" msgstr "加速度" msgid "Jerk(XY)" -msgstr "Jerk(XY)" +msgstr "" msgid "Raft" msgstr "ラフト" @@ -7481,15 +8722,27 @@ msgstr "ラフト" msgid "Support filament" msgstr "サポート用フィラメント" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "" -msgid "Skirt" -msgstr "スカート" +msgid "Multimaterial" +msgstr "" msgid "Prime tower" msgstr "プライムタワー" +msgid "Filament for Features" +msgstr "" + +msgid "Ooze prevention" +msgstr "垂れ出し抑止" + +msgid "Skirt" +msgstr "スカート" + msgid "Special mode" msgstr "特別モード" @@ -7497,10 +8750,10 @@ msgid "G-code output" msgstr "G-code出力" msgid "Post-processing Scripts" -msgstr "Post-processing Scripts" +msgstr "" msgid "Notes" -msgstr "Notes" +msgstr "" msgid "Frequent" msgstr "よく使う" @@ -7536,64 +8789,69 @@ msgstr "推奨ノズル温度" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "フィラメントの推奨ノズル温度、0は未設定との意味です" +msgid "Flow ratio and Pressure Advance" +msgstr "" + msgid "Print chamber temperature" msgstr "" msgid "Print temperature" msgstr "造形温度" -msgid "Nozzle" -msgstr "ノズル" - msgid "Nozzle temperature when printing" msgstr "ノズル温度" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "常温プレート" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "常温プレートが装着時のベッド温度です。値が0の場合、フィラメントが常温プレート" "に使用できない意味です。" -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "エンジニアリングプレート" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "エンジニアリングプレートが装着時のベッド温度です。値が0の場合、フィラメントが" "エンジニアリングプレートに使用できない意味です。" msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Smooth PEI Plate / High Temp Plate" +msgstr "" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" msgid "Textured PEI Plate" msgstr "PEIプレート" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "PEIプレートを使用時のベッド温度。値が0の場合、フィラメントがPEIプレートをサ" "ポートしない意味です。" @@ -7601,9 +8859,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "体積速度制限" -msgid "Cooling" -msgstr "冷却" - msgid "Cooling for specific layer" msgstr "特定層の冷却" @@ -7636,13 +8891,13 @@ msgid "Auxiliary part cooling fan" msgstr "パーツ補助冷却ファン" msgid "Exhaust fan" -msgstr "Exhaust fan" +msgstr "" msgid "During print" -msgstr "During print" +msgstr "" msgid "Complete print" -msgstr "Complete print" +msgstr "" msgid "Filament start G-code" msgstr "フィラメント開始G-code" @@ -7650,25 +8905,34 @@ msgstr "フィラメント開始G-code" msgid "Filament end G-code" msgstr "フィラメント終了G-code" -msgid "Multimaterial" -msgstr "" - msgid "Wipe tower parameters" msgstr "ワイプタワーのパラメータ" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "単一エクストルーダーMMプリンターのツールチェンジパラメーター" -msgid "Ramming settings" -msgstr "ラミング設定" +msgid "Set" +msgstr "設定" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "マルチエクストルーダーMMプリンターのツールチェンジパラメータ" +msgid "Dependencies" +msgstr "依存関係" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "互換性のあるプロセスプロファイル" + msgid "Printable space" msgstr "造形可能領域" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "パラメータ %1% に無効な値が指定されました: %2%" @@ -7691,7 +8955,7 @@ msgstr "" msgid "Accessory" msgstr "アクセサリー" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "プリンタG-code" msgid "Machine start G-code" @@ -7701,7 +8965,7 @@ msgid "Machine end G-code" msgstr "プリンター終了G-code" msgid "Printing by object G-code" -msgstr "Printing by object G-code" +msgstr "" msgid "Before layer change G-code" msgstr "積層変更前のG-code" @@ -7709,8 +8973,11 @@ msgstr "積層変更前のG-code" msgid "Layer change G-code" msgstr "積層変更時のG-code" -msgid "Time lapse G-code" -msgstr "Time lapse G-code" +msgid "Timelapse G-code" +msgstr "" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" msgstr "フィラメント変更G-code" @@ -7730,6 +8997,12 @@ msgstr "移動能力" msgid "Normal" msgstr "普通" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "速度制限" @@ -7739,19 +9012,40 @@ msgstr "加速制限" msgid "Jerk limitation" msgstr "振動特性" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "" +msgid "Number of extruders of the printer." +msgstr "プリンターのエクストルーダー数。" + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"1つのエクストルーダーのマルチマテリアルプリンターが選択されているため、すべて" +"のエクストルーダーの直径が同じでなければなりません。最初のエクストルーダーの" +"直径で、すべてのエクストルーダーノズルの直径を設定しますか？" + +msgid "Nozzle diameter" +msgstr "ノズル直径" + msgid "Wipe tower" msgstr "ワイプタワー" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "単一エクストルーダーのマルチマテリアルパラメーター" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" + msgid "Layer height limits" msgstr "積層ピッチの制限" -msgid "Lift Z Enforcement" +msgid "Z-Hop" msgstr "" msgid "Retraction when switching material" @@ -7762,12 +9056,17 @@ msgid "" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Disable it in order to enable Firmware Retraction?" msgid "Firmware Retraction" -msgstr "Firmware Retraction" +msgstr "" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" msgstr "分離的" @@ -7777,11 +9076,9 @@ msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Filament Preset and %d Process Preset is attached to this printer. Those " -"presets would be deleted if the printer is deleted." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." @@ -7796,24 +9093,17 @@ msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "以下のプリセットも削除されます: " -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "選択したプリセットを %1% しますか?" -msgid "All" -msgstr "すべて" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "設定" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "現在値をデフォルト値に戻します" @@ -7899,15 +9189,13 @@ msgstr "" "存の変更があります" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "" msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" -"\n" -"You can save or discard the preset values you have modified." msgid "" "\n" @@ -7916,7 +9204,7 @@ msgid "" msgstr "" msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "" msgid "" "\n" @@ -7927,9 +9215,6 @@ msgstr "" msgid "Extruders count" msgstr "押出機台数" -msgid "General" -msgstr "一般" - msgid "Capabilities" msgstr "能力" @@ -7937,7 +9222,7 @@ msgid "Show all presets (including incompatible)" msgstr "全てのプリセットを表示" msgid "Select presets to compare" -msgstr "Select presets to compare" +msgstr "" msgid "" "You can only transfer to current active profile because it has been modified." @@ -7990,6 +9275,9 @@ msgstr "作成者" msgid "Model Name" msgstr "モデル名" +msgid "Description:" +msgstr "詳細:" + #, c-format, boost-format msgid "%s Update" msgstr "%s 更新" @@ -8000,22 +9288,19 @@ msgstr "新しいバージョンが利用可能です" msgid "Configuration update" msgstr "構成の更新" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "新しい構成パッケージが利用できます。インストールしますか？" -msgid "Description:" -msgstr "詳細:" - msgid "Configuration incompatible" msgstr "構成ファイルは互換性がありません" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "構成パッケージが現在のアプリケーションと互換性がありません" #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "構成パッケージは現在のバージョンと互換性ありません。\n" "%sで構成パッケージを更新しアプリケーションを再起動します" @@ -8024,9 +9309,6 @@ msgstr "" msgid "Exit %s" msgstr "%s を終了" -msgid "the Configuration package is incompatible with current APP." -msgstr "構成パッケージは、このバージョンのSnapmaker Orcaに適用できません" - msgid "Configuration updates" msgstr "構成の更新" @@ -8036,59 +9318,216 @@ msgstr "利用可能なアップデートはありません" msgid "The configuration is up to date." msgstr "構成データが最新です" -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "" -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "" msgid "Append" -msgstr "Append" +msgstr "" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "" -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" msgstr "ラミングのカスタマイズ" @@ -8114,33 +9553,23 @@ msgstr "" "これはエキスパートレベルの設定です。不適切な調整は、ジャムや、ドライブギアが" "フィラメントを削ったりする可能性があります。" -msgid "Total ramming time" -msgstr "トータルラミング時間" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "流量を一定にするには、%1% を押したままドラッグします。" -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "合計ラミング容積" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "ラミング線幅" - -msgid "Ramming line spacing" -msgstr "ラミング線間距離" - -msgid "Auto-Calc" -msgstr "自動計算" - -msgid "Re-calculate" -msgstr "Re-calculate" - -msgid "Flushing volumes for filament change" -msgstr "フィラメントを入替える為のフラッシュ量" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -8154,23 +9583,23 @@ msgstr "推奨フラッシュ量範囲 [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "マルチプライヤーの有効範囲は [%.2f, %.2f] です。" +msgid "Re-calculate" +msgstr "" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "マルチプライヤ" -msgid "unloaded" -msgstr "アンロードしました" +msgid "Flushing volumes for filament change" +msgstr "フィラメントを入替える為のフラッシュ量" -msgid "loaded" -msgstr "ロード済み" - -msgid "Filament #" -msgstr "フィラメント#" - -msgid "From" -msgstr "From" - -msgid "To" -msgstr "→" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8184,7 +9613,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -8194,15 +9623,15 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" msgid "Bambu Network plug-in not detected." -msgstr "Bambu Network plug-in not detected." +msgstr "" msgid "Click here to download it." -msgstr "Click here to download it." +msgstr "" msgid "Login" msgstr "サインイン" @@ -8220,13 +9649,7 @@ msgid "Objects list" msgstr "オブジェクト一覧" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files" - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "" msgid "Paste from clipboard" msgstr "貼り付け" @@ -8235,7 +9658,7 @@ msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "3Dconnexion設定を表示/非表示" msgid "Switch table page" -msgstr "Switch table page" +msgstr "" msgid "Show keyboard shortcuts list" msgstr "ショートカット一覧を表示" @@ -8243,66 +9666,41 @@ msgstr "ショートカット一覧を表示" msgid "Global shortcuts" msgstr "ショートカット" -msgid "Rotate View" -msgstr "回転" - msgid "Pan View" msgstr "移動" -msgid "Mouse wheel" -msgstr "マウスホイール" +msgid "Rotate View" +msgstr "回転" msgid "Zoom View" msgstr "ズーム" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." -msgstr "選択した或いは全てのオブジェクトの向きを自動調整します。" +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." +msgstr "" +"選択したオブジェクトまたはプロジェクト内のすべてのオブジェクトの方向を自動的" +"に設定します。" -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "現在のプレート上のすべてのオブジェクトの方向を自動的に設定します。" msgid "Collapse/Expand the sidebar" msgstr "サイドバーを展開/隠す" -msgid "⌘+Any arrow" -msgstr "⌘+↑↓←→" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "オブジェクト移動" -msgid "⌥+Left mouse button" -msgstr "⌥+マウス左ボタン" - msgid "Select a part" msgstr "パーツを選択" -msgid "⌘+Left mouse button" -msgstr "⌘+マウス左ボタン" - msgid "Select multiple objects" msgstr "複数のオブジェクトを選択" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+↑↓←→" - -msgid "Alt+Left mouse button" -msgstr "Alt+マウス左ボタン" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+マウス左ボタン" - -msgid "Shift+Left mouse button" -msgstr "Shift + マウス左ボタン" - msgid "Select objects by rectangle" msgstr "矩形でオブジェクトを選択" @@ -8330,9 +9728,6 @@ msgstr "→" msgid "Move selection 10 mm in positive X direction" msgstr "X方向 10mm" -msgid "Shift+Any arrow" -msgstr "Shift + ↑↓←→" - msgid "Movement step set to 1 mm" msgstr "移動ステップを1mmに設定" @@ -8366,17 +9761,23 @@ msgstr "すべてのオブジェクトを選択" msgid "Gizmo move" msgstr "移動" +msgid "Gizmo rotate" +msgstr "回転" + msgid "Gizmo scale" msgstr "スケール" -msgid "Gizmo rotate" -msgstr "回転" +msgid "Gizmo place face on bed" +msgstr "底面選択" msgid "Gizmo cut" msgstr "カット" -msgid "Gizmo Place face on bed" -msgstr "底面選択" +msgid "Gizmo mesh boolean" +msgstr "メッシュブール" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "SLAサポートポイント" @@ -8384,9 +9785,18 @@ msgstr "SLAサポートポイント" msgid "Gizmo FDM paint-on seam" msgstr "継ぎ目ペイント" -msgid "Gizmo Text emboss / engrave" +msgid "Gizmo text emboss/engrave" msgstr "ギズモ・テキストのエンボス/エングレーブ" +msgid "Gizmo measure" +msgstr "測る" + +msgid "Gizmo assemble" +msgstr "組立てる" + +msgid "Gizmo brim ears" +msgstr "ブリム" + msgid "Zoom in" msgstr "ズームイン" @@ -8402,31 +9812,19 @@ msgstr "準備" msgid "Move: press to snap by 1mm" msgstr "1mm単位で移動" -msgid "⌘+Mouse wheel" -msgstr "⌘+マウスホイール" - msgid "Support/Color Painting: adjust pen radius" msgstr "サポート/色塗り: 半径のサイズ" -msgid "⌥+Mouse wheel" -msgstr "⌥+マウスホイール" - msgid "Support/Color Painting: adjust section position" msgstr "サポート/色塗り: 断面の位置" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+マウスホイール" - -msgid "Alt+Mouse wheel" -msgstr "Alt+マウスホイール" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "オブジェクトとパーツ造形用の押出機番号を設定" -msgid "Delete objects, parts, modifiers " +msgid "Delete objects, parts, modifiers" msgstr "オブジェクト、パーツ、モディファイヤを削除" msgid "Select the object/part and press space to change the name" @@ -8454,17 +9852,14 @@ msgid "Horizontal slider - Move active thumb Right" msgstr "水平スライダー (右)" msgid "On/Off one layer mode of the vertical slider" -msgstr "On/Off one layer mode of the vertical slider" +msgstr "" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "" msgid "Move slider 5x faster" msgstr "5x" -msgid "Shift+Mouse wheel" -msgstr "Shift + マウスホイール" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8475,7 +9870,7 @@ msgid "Release Note" msgstr "リリースノート" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "バージョン %s 更新内容" msgid "Network plug-in update" @@ -8488,68 +9883,38 @@ msgstr "" "が更新されます。" #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "新しいプラグイン (%s) が発見しました、インストールしますか？" msgid "New version of Snapmaker Orca" msgstr "新バージョン" msgid "Skip this Version" -msgstr "Skip this Version" - -msgid "Done" -msgstr "Done" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "印刷停止" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "まだ押し出されていません、再試行" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "ロード" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" +msgstr "" msgid "Confirm and Update Nozzle" -msgstr "Confirm and Update Nozzle" +msgstr "" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN接続失敗 (造形ファイル送信)" +msgid "Connect the printer using IP and access code" +msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." -msgstr "１Snapmaker Orcaとプリンターが同一のLANに繋いでいること確認してください。" +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." -msgstr "２下記IPアドレスやアクセスコードが一致していない場合修正してください。" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." +msgstr "" msgid "IP" msgstr "IP" @@ -8557,53 +9922,95 @@ msgstr "IP" msgid "Access Code" msgstr "アクセスコード" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "どこでプリンターのIPアドレスとアクセスコードを確認できますか？" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" +msgstr "" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" -msgstr "IP and Access Code Verified! You may close the window" +msgstr "IPとアクセスコードが確認されました！ウィンドウを閉じてください" + +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" msgid "Connection failed, please double check IP and Access Code" -msgstr "Connection failed, please double check IP and Access Code" +msgstr "" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" -"Connection failed! If your IP and Access Code is correct, \n" -"please move to step 3 for troubleshooting network issues" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" msgstr "モデル" -msgid "Serial:" -msgstr "シリアル番号" - -msgid "Version:" -msgstr "バージョン" - msgid "Update firmware" msgstr "ファームウェアを更新" msgid "Beta version" msgstr "Beta version" -msgid "Latest version" -msgstr "最新バージョン" - msgid "Updating" msgstr "更新中" -msgid "Updating failed" +msgid "Update failed" msgstr "更新は失敗しました" -msgid "Updating successful" +msgid "Update successful" msgstr "更新は成功しました" msgid "" @@ -8632,7 +10039,7 @@ msgstr "" msgid "Extension Board" msgstr "拡張ボード" -msgid "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." msgstr "3mfへの保存は失敗しました。" msgid "Only Windows 10 is supported." @@ -8656,22 +10063,22 @@ msgstr "修復が失敗しました" msgid "Loading repaired objects" msgstr "修復されたオブジェクトをロード" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "3mfのエクスポートが失敗しました" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "3mf ファイルをインポート失敗" -msgid "Repaired 3mf file does not contain any object" +msgid "Repaired 3MF file does not contain any object" msgstr "修復した3mfファイルにはオブジェクトがありません" -msgid "Repaired 3mf file contains more than one object" +msgid "Repaired 3MF file contains more than one object" msgstr "修復した3mfファイルには複数のオブジェクトが含まれています。" -msgid "Repaired 3mf file does not contain any volume" +msgid "Repaired 3MF file does not contain any volume" msgstr "修復された3mfファイルにはパーツがありません" -msgid "Repaired 3mf file contains more than one volume" +msgid "Repaired 3MF file contains more than one volume" msgstr "修復した3mfファイルには複数のパーツが含まれています。" msgid "Repair finished" @@ -8721,7 +10128,14 @@ msgid "No object can be printed. Maybe too small" msgstr "造形できるオブジェクトがありません。" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"プリントはプライミング領域に非常に近いです。 衝突がないことを確認してくださ" +"い。" + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "G-codeを生成できませんでした\n" @@ -8732,6 +10146,15 @@ msgstr "カスタムG-codeを確認するか、デフォルトを使用してく msgid "Generating G-code: layer %1%" msgstr "G-codeを生成：レイヤー %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "内壁" @@ -8769,7 +10192,7 @@ msgid "Multiple" msgstr "複数" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "線幅 %1% を算出できませんでした。%2%の値を取得できません。" msgid "" @@ -8826,25 +10249,25 @@ msgid "allocation failed" msgstr "メモリ割り当て失敗" msgid "file open failed" -msgstr "file open failed" +msgstr "" msgid "file create failed" -msgstr "file create failed" +msgstr "ファイルの作成に失敗しました" msgid "file write failed" -msgstr "file write failed" +msgstr "ファイルの書き込みに失敗しました" msgid "file read failed" -msgstr "file read failed" +msgstr "ファイルの読み込みに失敗しました" msgid "file close failed" -msgstr "file close failed" +msgstr "" msgid "file seek failed" -msgstr "file seek failed" +msgstr "" msgid "file stat failed" -msgstr "file stat failed" +msgstr "" msgid "invalid parameter" msgstr "無効なパラメータ" @@ -8883,12 +10306,14 @@ msgstr "%1% は他のオブジェクトと近すぎるため、衝突の可能 msgid "%1% is too tall, and collisions will be caused." msgstr "%1% は高すぎます、衝突の可能性があります。" -msgid " is too close to others, there may be collisions when printing." -msgstr "他のオブジェクトと近すぎます。オブジェクトと衝突の可能性があります。" - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "が除外領域に近すぎます。衝突の可能性があります。" +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "プライムタワー" @@ -8899,12 +10324,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "除外領域 に近すぎるので、衝突の可能性があります。\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"温度差が大きいフィラメントを一緒に造形することができません。ノズル詰まりや損" -"傷する可能性があります" msgid "No extrusions under current settings." msgstr "現在の設定では造形しません" @@ -8914,6 +10361,15 @@ msgid "" "enabled." msgstr "オブジェクト順で造形するでは、この機能を使用できません。" +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -8925,6 +10381,14 @@ msgid "" "materials." msgstr "複数の素材の場合、スパイラルモードを使用できません" +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"オブジェクト %1% 自体はビルドボリュームに適合していますが、材料の収縮補正のた" +"め、ビルドボリュームの最大の高さを超えています。" + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "オブジェクト %1% がビルドボリュームの最大高さを超えています。" @@ -8945,33 +10409,32 @@ msgstr "" "い。" msgid "Variable layer height is not supported with Organic supports." -msgstr "Variable layer height is not supported with Organic supports." +msgstr "" msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Ooze prevention is currently not supported with the prime tower enabled." +"オーズ防止は、'single_extruder_multi_material'がオフの場合にのみ、 ワイプタ" +"ワーと併用してサポートされます。" msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " -"RepRapFirmware and Repetier G-code flavors." +"プライムタワーは現在、Marlin、RepRap/Sprinter、RepRapFirmware、およびRepetier" +"のGコード形式のみサポートされています。" msgid "The prime tower is not supported in \"By object\" print." msgstr "オブジェクト順で造形する場合、プライムタワーを利用できません" @@ -8981,23 +10444,29 @@ msgid "" "requires that all objects have the same layer height." msgstr "[アダプティブ積層ピッチ]を使用する時に、プライムタワーを利用できません" -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "プライムタワーを使用するにはサポートとのギャップを積層ピッチの整数倍である必" "要があります" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "プライムタワーを使用するには、全てのオブジェクトが同じ積層ピッチを使う必要が" "あります" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "プライムタワーを使用するには、全てのオブジェクトが同じラフト層数を使う必要が" "あります" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9007,17 +10476,28 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "プライムタワーを使用するには、全てのオブジェクトが同じ積層ピッチを持つ必要が" "あります" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "線幅が小さすぎます" msgid "Too large line width" msgstr "線幅が広すぎます" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9051,7 +10531,7 @@ msgstr "" "サポート増強器を有効しましたが、サポート自体は有効されていません。有効にして" "ください。" -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "積層ピッチはノズルの直径を超える為設定できません" msgid "" @@ -9094,6 +10574,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9112,6 +10601,18 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"使用するフィラメントの収縮率が大きく異なるため、フィラメント収縮率は使用しま" +"せん。" + msgid "Generating skirt & brim" msgstr "スカートとブリムを生成" @@ -9124,9 +10625,15 @@ msgstr "G-codeを生成" msgid "Failed processing of the filename_format template." msgstr "filename_formatテンプレートを処理できませんでした" +msgid "Printer technology" +msgstr "プリント方式" + msgid "Printable area" msgstr "造形可能領域" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "除外領域" @@ -9146,8 +10653,8 @@ msgid "Elephant foot compensation" msgstr "コーナーはみ出し補正" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "1層目を縮小して、コーナーのはみ出しを軽減します。" msgid "Elephant foot compensation layers" @@ -9165,20 +10672,28 @@ msgstr "積層" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "積層の高さです。小さい値では仕上がりがと良くなりますが、造形時間が伸びます。" msgid "Printable height" msgstr "造形可能高さ" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "造形可能の最大高さです。" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -9187,7 +10702,7 @@ msgstr "プリセット名" msgid "Use 3rd-party print host" msgstr "" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" msgid "Hostname, IP or URL" @@ -9204,13 +10719,11 @@ msgstr "" "下記形式を参照してください https://username:password@your-octopi-address/" msgid "Device UI" -msgstr "Device UI" +msgstr "" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" -"Specify the URL of your device user interface if it's not the same as " -"print_host" msgid "API Key / Password" msgstr "APIキー/パスワード" @@ -9220,7 +10733,7 @@ msgid "" "contain the API Key or the password required for authentication." msgstr "APIキーとパスワードを入力してください。" -msgid "Name of the printer" +msgid "Name of the printer." msgstr "プリンター名" msgid "HTTPS CA File" @@ -9247,7 +10760,7 @@ msgid "" "certificates if connection fails." msgstr "HTTPS証書の失効チェックを省略します。" -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "プリンターに関連するプリセット名" msgid "Authorization Type" @@ -9259,20 +10772,21 @@ msgstr "APIキー" msgid "HTTP digest" msgstr "HTTP digest" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "壁上の移動を迂回" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "移動する時に、壁面を迂回します。表面の仕上がりが良くなります。" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "最大迂回距離" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "迂回距離上限: 移動距離がこの値以上になる場合迂回しません。値が0の場合無効にな" "ります。" @@ -9284,37 +10798,39 @@ msgid "Other layers" msgstr "他の層" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "ベッドの温度です（1層目以外）。値が0の場合、フィラメントが常温プレートで使用" "できないという意味です。" -msgid "°C" -msgstr "°C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "ベッドの温度です（1層目以外）。値が0の場合、フィラメントがエンジニアリング プ" "レートで使用できないという意味です。" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "ベッドの温度です（1層目以外）。値が0の場合、フィラメントが高温プレートで使用" "できないという意味です。" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "1層目以外のベッド温度。値が0の場合、フィラメントがPEIプレートをサポートしない" "意味をします。" @@ -9326,66 +10842,72 @@ msgid "Initial layer bed temperature" msgstr "1層目ベッド温度" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "1層目のベッド温度です。値が0の場合、フィラメントが常温プレートに使用できない" "意味です。" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "1層目のベッド温度です。値が0の場合、フィラメントがエンジニアリング プレートに" "使用できない意味です。" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "1層目のベッド温度です。値が0の場合、フィラメントが高温プレートに使用できない" "意味です。" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "1層目のベッド温度。値が0の場合は、フィラメントがPEIプレートをサポートしない意" "味です。" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "適応ベッド種類" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "エンジニアリングプレート" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" -msgstr "First layer print sequence" +msgstr "" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "積層が変わる直前に実行するG-codeです。" msgid "Bottom shell layers" @@ -9394,7 +10916,7 @@ msgstr "底面層数" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "底面に使用するソリッド層数です。この値が底面の厚みより小さい場合、層数を増や" "して厚みに合わせます。" @@ -9406,8 +10928,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "底面の厚さです、底面層数で決まった厚みがこの値より小さい場合、層数を増やしま" "す。この値が0にする場合、この設定が無効となり、設定した層数で造形します。" @@ -9416,14 +10938,31 @@ msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -9433,70 +10972,107 @@ msgid "Top and bottom surfaces" msgstr "" msgid "Nowhere" -msgstr "" +msgstr "なし" -msgid "Force cooling for overhang and bridge" -msgstr "ｵｰﾊﾞｰﾊﾝｸﾞとﾌﾞﾘｯｼﾞの冷却" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"この設定により、パーツ冷却ファンの回転速度を最適化を行います。オーバーハング" -"やブリッジの冷却に有効的です。" -msgid "Fan speed for overhang" -msgstr "オーバーハングの回転速度" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"大きなオーバーハングやブリッジを造形する時にファンの回転速度。仕上がりが向上" -"させる効果があります。" -msgid "Cooling overhang threshold" -msgstr "オーバーハングの冷却閾値" +msgid "Overhang cooling activation threshold" +msgstr "" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" -msgstr "" -"Force cooling fan to be a specific speed when overhang degree of printed " -"part exceeds this value. This is expressed as a percentage which indicates " -"how much width of the line without support from lower layer. 0% means " -"forcing cooling for all outer wall no matter the overhang degree." - -msgid "Bridge infill direction" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" +msgid "External bridge infill direction" +msgstr "" + +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "ブリッジ角度。値が0の場合は自動計算となります。0°を使用したい場合は180を入力" "していください。" -msgid "Bridge density" +msgid "Internal bridge infill direction" msgstr "" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" msgid "Bridge flow ratio" msgstr "ブリッジ流量" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"この値を少し (例えば 0.9) 小さくし、ブリッジ用に押出し量を減らし、たるみを防" -"ぎます。" msgid "Internal bridge flow ratio" msgstr "" @@ -9504,23 +11080,129 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" -msgstr "Top surface flow ratio" +msgstr "" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have a smooth surface finish." msgid "Bottom surface flow ratio" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" @@ -9528,17 +11210,16 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "トップ面に1層" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "トップ面に1層だけ造形します、インフィルを多い空間を与えます。" msgid "One wall threshold" @@ -9557,11 +11238,11 @@ msgid "" msgstr "" msgid "Only one wall on first layer" -msgstr "Only one wall on first layer" +msgstr "" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" msgid "Extra perimeters on overhangs" @@ -9569,10 +11250,10 @@ msgstr "" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "" msgid "Overhang reversal" @@ -9580,7 +11261,7 @@ msgstr "" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9591,7 +11272,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9600,9 +11281,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9611,9 +11292,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9632,19 +11313,15 @@ msgstr "" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" msgid "Slow down for overhang" msgstr "オーバーハング減速" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "オーバーハングを造形時に速度を下げます。各角度のオーバーハングに対して、下記" "の減速パラメータを設定してください。" @@ -9652,35 +11329,51 @@ msgstr "" msgid "Slow down for curled perimeters" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" msgid "mm/s or %" -msgstr "mm/s or %" +msgstr "mm/s 或は %" -msgid "External" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" -msgid "Speed of bridge and completely overhang wall" -msgstr "ブリッジを造形する時に速度です。" - -msgid "mm/s" -msgstr "mm/s" - msgid "Internal" msgstr "" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" msgid "Brim width" msgstr "ブリム幅" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "一番外側のブリム線がモデルと距離です。" msgid "Brim type" @@ -9688,17 +11381,15 @@ msgstr "ブリムタイプ" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." -msgstr "" -"This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgstr "" msgid "Brim-object gap" msgstr "ブリムとオブジェクトの間隔" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "ブリムを取り外しやすくする為、一番内側のブリムラインをモデルと少し距離を設け" "ます。" @@ -9713,8 +11404,8 @@ msgid "Brim ear max angle" msgstr "" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" @@ -9722,27 +11413,42 @@ msgid "Brim ear detection radius" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -msgid "Compatible machine" -msgstr "対応機種" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "互換性のあるデバイス" -msgid "Compatible machine condition" -msgstr "対応機種条件" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "互換性のあるプロセスプロファイル" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"アクティブなプリンタープロファイルの構成値を使った論理式です。 この論理式が真" +"の場合、このプロファイルはアクティブなプリンタープロファイルと互換性があると" +"見なされます。" -msgid "Compatible process profiles condition" -msgstr "互換性のあるプロセスプロファイル条件" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"アクティブなプリントプロファイルの構成値を使用する論理式。 この式の結果がtrue" +"の場合、このプロファイルはアクティブなプリントプロファイルと互換性があるとみ" +"なされます。" + +msgid "Print sequence, layer by layer or object by object." msgstr "造形の順番を設定します、積層順かオブジェクト順にしてください" msgid "By layer" @@ -9754,7 +11460,7 @@ msgstr "オブジェクト順" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -9767,7 +11473,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "この設定を有効にする場合、最終層の造形で速度を下げます。よって、最終層の冷却" "時間を延長されますので、細部の品質を改善に繋がります。" @@ -9777,26 +11483,23 @@ msgstr "通常造形" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "造形と移動時のデフォルト加速度です。" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "デフォルト フィラメント プロファイル" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "デバイスを切替える時のデフォルト フィラメント プロファイル" msgid "Default process profile" msgstr "デフォルト プロセスプロファイル" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "デバイスを切替える時のデフォルト プロセス プロファイル" msgid "Activate air filtration" -msgstr "Activate air filtration" +msgstr "" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" @@ -9805,21 +11508,19 @@ msgid "Fan speed" msgstr "回転速度" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -"Speed of exhaust fan during printing.This speed will override the speed in " -"filament custom g-code" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "" msgid "No cooling for the first" msgstr "冷却しない最初層数" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "1層目をプリント時に全てのファンをオフにします。ベッドとの接着性を高めます" @@ -9827,14 +11528,14 @@ msgid "Don't support bridges" msgstr "ブリッジにサポートしない" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "ブリッジが長くない場合は、サポートが無くても造形できます。フィラメントの消費" "量を減らします。" -msgid "Thick bridges" -msgstr "厚いブリッジ" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -9853,41 +11554,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "無効" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -9909,20 +11651,18 @@ msgstr "" msgid "End G-code" msgstr "終了G-code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "造形完了時のG-codeを追加" -msgid "Between Object Gcode" -msgstr "Between Object Gcode" +msgid "Between Object G-code" +msgstr "" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" -msgstr "" "Insert G-code between objects. This parameter will only come into effect " "when you print your models object by object." +msgstr "" -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "このフィラメントを使用終わった時のG-codeを追加" msgid "Ensure vertical shell thickness" @@ -9948,24 +11688,24 @@ msgstr "" msgid "Top surface pattern" msgstr "トップ面パターン" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "トップ面のインフィルのパターンです。" -msgid "Concentric" -msgstr "同心" - -msgid "Rectilinear" -msgstr "直線" - msgid "Monotonic" msgstr "単調" msgid "Monotonic line" msgstr "単調線" +msgid "Rectilinear" +msgstr "直線" + msgid "Aligned Rectilinear" msgstr "整列直線" +msgid "Concentric" +msgstr "同心" + msgid "Hilbert Curve" msgstr "ヒルベルト曲線" @@ -9978,11 +11718,11 @@ msgstr "オクタグラムスパイラル" msgid "Bottom surface pattern" msgstr "底面パターン" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "底面のインフィル パターンです、ブリッジインフィルが含まれていません。" msgid "Internal solid infill pattern" -msgstr "Internal solid infill pattern" +msgstr "" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " @@ -10001,7 +11741,7 @@ msgstr "" "外壁の造形速度です。普段は内壁より遅い速度を指定し、仕上がりが良くなります。" msgid "Small perimeters" -msgstr "Small perimeters" +msgstr "" msgid "" "This separate setting will affect the speed of perimeters having radius <= " @@ -10014,18 +11754,17 @@ msgid "Small perimeters threshold" msgstr "" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10035,15 +11774,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -10056,14 +11793,14 @@ msgid "Inner/Outer/Inner" msgstr "" msgid "Print infill first" -msgstr "Print infill first" +msgstr "" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed " "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10077,10 +11814,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -10116,10 +11853,10 @@ msgstr "" "ブジェクトの間隔を計算します。" msgid "Nozzle height" -msgstr "Nozzle height" +msgstr "" msgid "The height of nozzle tip." -msgstr "The height of nozzle tip." +msgstr "" msgid "Bed mesh min" msgstr "" @@ -10165,10 +11902,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "押出機の色" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "ビジュアル情報として使用される" msgid "Extruder offset" @@ -10178,24 +11918,115 @@ msgid "Flow ratio" msgstr "流量比" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "フィラメントは温度により体積が変わります。この設定で押出流量を比例的に調整し" "ます。 0.95 ～ 1.05の間で設定していください。" +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" + msgid "Enable pressure advance" -msgstr "Enable pressure advance" +msgstr "" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" msgid "" @@ -10207,8 +12038,9 @@ msgid "Keep fan always on" msgstr "ファン常時ON" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "この設定により、パーツ冷却ファンを停止しなく、最低速度で回転します。頻繁に回" "転・停止の頻度を減らします。" @@ -10220,13 +12052,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -10235,20 +12065,22 @@ msgstr "積層時間" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "パーツ冷却ファンは、積層造形時間がこの値より短い時に作動します。" msgid "Default color" msgstr "デフォルト色" -msgid "Default filament color" -msgstr "フィラメントのデフォルト色" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" -msgstr "Filament notes" +msgstr "" msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." +msgstr "" msgid "Required nozzle HRC" msgstr "ノズルHRC" @@ -10260,36 +12092,90 @@ msgstr "" "フィラメントを使用するのに最低限のノズルHRCです。値が0の場合、ノズルのNRCを" "チェックしない意味です。" +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "この設定は、単位時間で押出できるフィラメントの体積を示します。造形速度はこの" "パラメータにも制限されています。0に設定できません。" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "フィラメントロード時間" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"フィラメントを入れ替える時に、フィラメントをロードする時間です、統計目的に使" -"用されています。" msgid "Filament unload time" msgstr "フィラメントアンロード時間" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" -"フィラメントを入れ替える時に、フィラメントをアンロードする時間です、統計目的" -"に使用されています。" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "押出制御に使用されるパラメータなので、精確なフィラメント直径を入力してくださ" "い" @@ -10298,7 +12184,7 @@ msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10307,17 +12193,50 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +"フィラメントが冷却後に収縮する率を入力します（100mm→94mmならば94%）。この収縮" +"により、パーツはxy方向でスケーリングされて補償されます。補償は、パーツの周囲" +"部分に使用されるフィラメントのみが考慮されます。\n" +"この補償はチェック後に行われます。オブジェクト間に十分なスペースを確保してく" +"ださい。" + +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" msgstr "ローディング速度" @@ -10335,7 +12254,7 @@ msgid "Unloading speed" msgstr "アップロードスピード" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "ワイプタワー上でアンロードするときのスピード（ラミング直後のアンロードスピー" @@ -10352,8 +12271,8 @@ msgid "Delay after unloading" msgstr "アンロードした後の待ち時間" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "フィラメントがアンロードされた後に停止する時間。 軟らかい材料などで元の寸法に" @@ -10370,6 +12289,24 @@ msgstr "" "フィラメントは、冷却チューブ内で上下に移動することにより冷却されます。 これら" "の上下移動の必要な回数を指定します。" +msgid "Stamping loading speed" +msgstr "スタンピングのローディング速度" + +msgid "Speed used for stamping." +msgstr "スタンピング時の速度。" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "冷却チューブの中心から測定したスタンピング距離" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"ゼロ以外の値に設定すると、個々の冷却動作 (”スタンピング”) の間にフィラメント" +"がノズルに向かって移動します。 このオプションは、フィラメントが再びリトラクト" +"するまでのこの移動の時間を設定します。" + msgid "Speed of the first cooling move" msgstr "冷却移動の最初の速度" @@ -10393,15 +12330,6 @@ msgstr "最後の冷却移動の速度" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "冷却動作は、この速度に向かって徐々に加速しています。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"ツールの変更中（Tコードの実行時）にプリンターファームウェア（またはMulti " -"Material Unit 2.0）が新しいフィラメントをロードする時間。 この時間は、Gコード" -"時間推定プログラムによって合計プリント時間に追加されます。" - msgid "Ramming parameters" msgstr "ラミングパラメーター" @@ -10412,23 +12340,14 @@ msgstr "" "この文字列はラミングダイアログで編集され、ラミング固有のパラメーターが含まれ" "ています。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"ツールチェンジ中（Tコードの実行時）にプリンターファームウェア（またはMulti " -"Material Unit 2.0）がフィラメントをアンロードする時間。 この時間は、Gコード時" -"間予測プログラムによって合計プリント予測時間に追加されます。" - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "マルチツールのセットアップでラミングを有効にする" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "マルチツールプリンターを使用しているとき（つまり、プリンター設定の「シングル" "エクストルーダーマルチマテリアル」のチェックが外れているとき）に、ラミングを" @@ -10436,70 +12355,78 @@ msgstr "" "ワー上で急速に押し出されます。このオプションは、ワイプタワーが有効な場合にの" "み使用されます。" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "マルチツールラミング量" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "ツールチェンジ前にラミングで使用する量" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "マルチツールラミングフロー" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "ツールチェンジ前のフィラメントのラミングに使うフロー。" msgid "Density" msgstr "密度" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "フィラメント密度" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "フィラメント素材タイプ" msgid "Soluble material" msgstr "可溶性材料" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "可溶性材料は、サポート又はサポート接触面の造形によく使われます" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "サポート材料" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "サポート素材は、サポート又はサポート接触面の造形によく使われます。" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" -msgstr "Softening temperature" +msgstr "" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" -"The material softens at this temperature, so when the bed temperature is " "equal to or greater than this, it's highly recommended to open the front " -"door and/or remove the upper glass to avoid clogs." +"door and/or remove the upper glass to avoid clogging." +msgstr "" msgid "Price" msgstr "価格" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "フィラメント単価" msgid "money/kg" msgstr "USD/kg" msgid "Vendor" -msgstr "Vendor" +msgstr "" -msgid "Vendor of filament. For show only" -msgstr "Filament Vendor (Only for show)" +msgid "Vendor of filament. For show only." +msgstr "" msgid "(Undefined)" msgstr "(未定義)" @@ -10509,7 +12436,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "スパース インフィル パターンの角度です" msgid "Solid infill direction" @@ -10517,13 +12444,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10532,38 +12453,67 @@ msgstr "充填密度" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "充填パターン" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "スパース インフィルのパターンです。" -msgid "Grid" -msgstr "グリッド" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "直線" -msgid "Cubic" -msgstr "キュービック" +msgid "Grid" +msgstr "グリッド" msgid "Tri-hexagon" msgstr "六角形" -msgid "Gyroid" -msgstr "ジャイロイド" - -msgid "Honeycomb" -msgstr "ハニカム" +msgid "Cubic" +msgstr "キュービック" msgid "Adaptive Cubic" msgstr "アダプティブ キュービック" -msgid "3D Honeycomb" -msgstr "3D ハニカム" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "キュービックサポート" @@ -10571,9 +12521,53 @@ msgstr "キュービックサポート" msgid "Lightning" msgstr "ライトニング" +msgid "Honeycomb" +msgstr "ハニカム" + +msgid "3D Honeycomb" +msgstr "3D ハニカム" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "Cross Hatch" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "ジャイロイド" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "" @@ -10585,16 +12579,16 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" msgid "0 (no open anchors)" -msgstr "0 (no open anchors)" +msgstr "" msgid "1000 (unlimited)" -msgstr "1000 (unlimited)" +msgstr "" msgid "Maximum length of the infill anchor" msgstr "最長インフィルアンカー" @@ -10607,7 +12601,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10615,23 +12609,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "トップ面のインフィル加速度です。遅くすると表面の仕上がりが向上させることがで" "きます" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "外壁の加速度：低い値では品質を向上させることができます。" msgid "" @@ -10640,14 +12634,12 @@ msgid "" msgstr "" msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² 或は %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." msgid "" "Acceleration of internal solid infill. If the value is expressed as a " @@ -10657,40 +12649,51 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "1層目の造形加速度です。遅くするとプレートとの接着を向上させることができます" msgid "Enable accel_to_decel" -msgstr "Enable accel_to_decel" +msgstr "" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "" msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -msgid "Jerk of outer walls" -msgstr "Jerk of outer walls" - -msgid "Jerk of inner walls" -msgstr "Jerk of inner walls" - -msgid "Jerk for top surface" +msgid "Default jerk." msgstr "" -msgid "Jerk for infill" +msgid "Junction Deviation" msgstr "" -msgid "Jerk for initial layer" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." msgstr "" -msgid "Jerk for travel" +msgid "Jerk of outer walls." +msgstr "" + +msgid "Jerk of inner walls." +msgstr "" + +msgid "Jerk for top surface." +msgstr "" + +msgid "Jerk for infill." +msgstr "" + +msgid "Jerk for initial layer." +msgstr "" + +msgid "Jerk for travel." msgstr "" msgid "" @@ -10703,22 +12706,22 @@ msgstr "1層目の高さ" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "1層目の高さです。高さを大きくすればプレートとの接着性が良くなります。" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "1層目を造形時に、ソリッド インフィル以外の部分の造形速度です。" msgid "Initial layer infill" msgstr "1層目インフィル" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "1層目のソリッド インフィルの造形速度です。" msgid "Initial layer travel speed" msgstr "" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "" msgid "Number of slow layers" @@ -10732,7 +12735,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "1層目のノズル温度" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "1層目でのノズル温度" msgid "Full fan speed at layer" @@ -10753,24 +12756,48 @@ msgid "Support interface fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "この設定により、壁面を造形時にノズルがランダムで軽微な振動を加えます。これに" "より、表面にザラザラ感が出来上がります。" msgid "Contour" -msgstr "Contour" +msgstr "" msgid "Contour and hole" -msgstr "Contour and hole" +msgstr "" msgid "All walls" msgstr "すべての壁" @@ -10779,60 +12806,149 @@ msgid "Fuzzy skin thickness" msgstr "厚さ" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "ジッターの幅：外壁の線幅より小さくするのをお勧めします。" msgid "Fuzzy skin point distance" msgstr "ポイント距離" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "ポイント間の平均距離" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "クラシック" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" -msgstr "Filter out tiny gaps" +msgstr "" msgid "Layers and Perimeters" msgstr "積層と境界" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "ギャップを充填時の速度です。ギャップの幅が不規則なので、遅くするのが推奨で" "す。" msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." msgid "Arc fitting" msgstr "曲線フィッティング" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -10842,7 +12958,8 @@ msgstr "" msgid "Add line number" msgstr "行番号を追加" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "各G-codeラインの先頭に行番号 (Nx)を追加します" msgid "Scan first layer" @@ -10850,7 +12967,7 @@ msgstr "1層目を検査" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "カメラで1層目検査を有効にします" msgid "Nozzle type" @@ -10858,7 +12975,7 @@ msgstr "ノズルタイプ" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "ノズル材料：これにより、ノズルの耐摩耗性と使用できるフィラメントが決まりま" "す。" @@ -10872,6 +12989,9 @@ msgstr "焼入れスチール" msgid "Stainless steel" msgstr "ステンレススチール" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "真鍮" @@ -10887,10 +13007,10 @@ msgid "HRC" msgstr "HRC" msgid "Printer structure" -msgstr "Printer structure" +msgstr "" -msgid "The physical arrangement and components of a printing device" -msgstr "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." +msgstr "" msgid "CoreXY" msgstr "" @@ -10905,10 +13025,10 @@ msgid "Delta" msgstr "" msgid "Best object position" -msgstr "Best object position" +msgstr "" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "Best auto arranging position in range [0,1] w.r.t. bed shape." +msgstr "" msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " @@ -10920,10 +13040,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" @@ -10947,14 +13067,14 @@ msgstr "" msgid "Time cost" msgstr "" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "" msgid "money/h" msgstr "" msgid "Support control chamber temperature" -msgstr "Support controlling chamber temperature" +msgstr "" msgid "" "This option is enabled if machine support controlling chamber temperature\n" @@ -10962,7 +13082,7 @@ msgid "" msgstr "" msgid "Support air filtration" -msgstr "Support air filtration" +msgstr "" msgid "" "Enable this if printer support air filtration\n" @@ -10972,7 +13092,7 @@ msgstr "" msgid "G-code flavor" msgstr "G-codeスタイル" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "プリンターが対応するG-code" msgid "Klipper" @@ -10981,29 +13101,34 @@ msgstr "" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "オブジェクトにラベルを付ける" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" +"このオプションを有効にすると、Gコードのプリント移動コマンドに、どのオブジェク" +"トに属するものかがわかるようにラベルコメントが追加されます。これはOctoprintの" +"CancelObjectプラグインに役立ちます。 この設定は、単一エクストルーダーのマルチ" +"マテリアル構成およびオブジェクト内ワイプのノズルクリーニング機能と互換性があ" +"りません。" msgid "Exclude objects" -msgstr "Exclude objects" +msgstr "" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" msgid "Verbose G-code" @@ -11028,6 +13153,128 @@ msgstr "" "複数層のスパース インフィルをまとめて造形し、時間短縮に効きます。壁面はこの設" "定に影響されません" +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "スパース インフィルを造形時使用するフィラメントです。" @@ -11054,83 +13301,102 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "スパース インフィルの造形速度です。" +msgid "Inherits profile" +msgstr "プロファイルを継承" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" -msgstr "Interface shells" +msgstr "" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" msgid "Maximum width of a segmented region" -msgstr "Maximum width of a segmented region" +msgstr "" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Maximum width of a segmented region. A value of 0 disables this feature." msgid "Interlocking depth of a segmented region" -msgstr "Interlocking depth of a segmented region" +msgstr "" -msgid "Interlocking depth of a segmented region. Zero disables this feature." -msgstr "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." +msgstr "" +"セグメント化された領域の連動深さ。mmu_segmented_region_max_width \"が0" +"か、\"mmu_segmented_region_interlocking_depth \"が " +"\"mmu_segmented_region_max_width \"より大きい場合は無視される。ゼロはこの機能" +"を無効にする。" msgid "Use beam interlocking" -msgstr "" +msgstr "インターロックビームを使用する" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"異なるフィラメントが接触する場所にインターロックのためのビーム構造を生成しま" +"す。これにより、特に異なる素材でプリントされたモデルのフィラメント間の接着性" +"が向上します。" msgid "Interlocking beam width" -msgstr "" +msgstr "インターロックビームの幅" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "インターロック構造のビームの幅。" msgid "Interlocking direction" -msgstr "" +msgstr "インターロックの方向" msgid "Orientation of interlock beams." msgstr "" msgid "Interlocking beam layers" -msgstr "" +msgstr "インターロックビームの層" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"インターロック構造のビームの高さを用いて、レイヤー数を測ります。レイヤー数が" +"少ないほど強度は高いですが、欠陥が生じやすくなります。" msgid "Interlocking depth" -msgstr "" +msgstr "インターロックの深さ" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"フィラメント間の境界からインターロック構造を形成するまでの距離で、セル単位で" +"測定されます。セル数が少なすぎると接着力が低下します。" msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "インターロックの境界回避" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"インターロック構造が生成されないモデルの外側からの距離をセル単位で指定しま" +"す。" msgid "Ironing Type" msgstr "アイロン面" @@ -11155,9 +13421,9 @@ msgid "All solid layer" msgstr "全てのソリッド積層" msgid "Ironing Pattern" -msgstr "Ironing Pattern" +msgstr "" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "" msgid "Ironing flow" @@ -11165,38 +13431,53 @@ msgstr "アイロン時の流量比率" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "アイロン時の押出量です。通常流量の比率で決まります。" msgid "Ironing line spacing" msgstr "アイロン時にライン間隔" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "アイロン時の線間隔です。" +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "アイロン時の移動速度" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "アイロン時の造形速度です。" -msgid "Ironing angle" +msgid "Ironing angle offset" msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "The angle of ironing lines offset from the top surface." msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "積層が変わる直後に実行するG-codeです。" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "サイレントモード" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "サイレントモード有無" msgid "Emit limits to G-code" @@ -11207,23 +13488,23 @@ msgstr "プリンター制限" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "このG-codeは造形を一時停止用です。ユーザがこれをG-codeに入れて造形を一時停止" "できます。" -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "このG-codeがカスタム用です。" msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -11232,8 +13513,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -11308,6 +13589,15 @@ msgstr "最大振動 Z" msgid "Maximum jerk of the E axis" msgstr "最大振動 E" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "押出最低速度" @@ -11335,23 +13625,39 @@ msgstr "リトラクション最大加速度 (M204 R)" msgid "Maximum acceleration for travel" msgstr "移動最大加速度" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" + +msgid "Resonance avoidance" msgstr "" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" -msgstr "自動冷却時に、パーツ冷却ファンの最大回転速度。" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "最小" + +msgid "Minimum speed of resonance avoidance." +msgstr "" msgid "Max" msgstr "最大" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "自動冷却時に、パーツ冷却ファンの最大回転速度。" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"最大積層ピッチ：この値は「アダプティブ積層ピッチ」が有効時に積層ピッチの最大" -"値です" msgid "Extrusion rate smoothing" msgstr "" @@ -11362,47 +13668,54 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "パーツ冷却ファンの最低回転数" msgid "" @@ -11413,29 +13726,21 @@ msgid "" "command: M106 P2 S(0-255)" msgstr "" -msgid "Min" -msgstr "最小" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"最小積層ピッチ：この値は「アダプティブ積層ピッチ」が有効時に積層ピッチの最小" -"値です" msgid "Min print speed" msgstr "最小造形速度" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Nozzle diameter" -msgstr "ノズル直径" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "ノズル直径" msgid "Configuration notes" @@ -11459,7 +13764,7 @@ msgstr "ホストタイプを入力してください。" msgid "Nozzle volume" msgstr "内腔容積" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "ノズル先端とフィラメントカッターの間の体積" msgid "Cooling tube position" @@ -11504,7 +13809,7 @@ msgstr "追加ローディング長さ" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "ゼロに設定すると、ロード中にフィラメントがパーキング位置から押し出される距離" @@ -11523,14 +13828,21 @@ msgstr "ｲﾝﾌｨﾙのﾘﾄﾗｸｼｮﾝ低減" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "インフィル領域内の移動はリトラクションしません。造形時間を節約できます。" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"このオプションは、非アクティブなエクストルーダーの温度を下げて、樹脂ダレを防" +"止するものです。" + msgid "Filename format" msgstr "ファイル名形式" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "エクスポート時ファイル名を設定できます" msgid "Make overhangs printable" @@ -11553,12 +13865,9 @@ msgstr "" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "オーバーハングを検出" @@ -11570,15 +13879,18 @@ msgstr "" "この設定により、線幅に対するオーバーハングの割合を検出し、異なる速度で造形し" "ます。100%%のオーバーハングの場合、ブリッジの速度が使用されます。" +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "内壁の造形速度です。" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "壁面の層数です。" msgid "Alternate extra wall" @@ -11586,10 +13898,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11603,16 +13915,25 @@ msgid "" "environment variables." msgstr "" +msgid "Printer type" +msgstr "プリンタータイプ" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" -msgstr "Printer notes" +msgstr "" msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." +msgstr "" + +msgid "Printer variant" +msgstr "プリンターバリエーション" msgid "Raft contact Z distance" msgstr "ラフト接触面Z間隔" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "ラフトとオブジェクトのZ方向の間隔。可溶性材料を使用する場合この設定が無効で" "す。" @@ -11620,19 +13941,19 @@ msgstr "" msgid "Raft expansion" msgstr "ラフト拡張" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "この設定により、ラフトのXYサイズを拡大します。" msgid "Initial layer density" msgstr "1層目の密度" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "ラフト或はサポートの1層目の密度です。" msgid "Initial layer expansion" msgstr "1層目拡張" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "この設定により、ラフト或はサポートの1層目を拡大します。ベッドとの接着性が良く" "なります。" @@ -11642,15 +13963,15 @@ msgstr "ラフト" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "指定したサポート層数で上げて造形します。ABSなど反りやすい材料に対して有効的で" "す。" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "モデルを簡略化してG-codeのデータ量を減らせます。値が小さく設定するほど、分解" "能が高くなり、スライス時間も長くなります。" @@ -11660,21 +13981,21 @@ msgstr "移動距離閾値" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "移動距離が閾値以上の場合のみ、リトラクションを作動します。" msgid "Retract amount before wipe" msgstr "拭き上げ前のリトラクション量" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "拭き上げ前のリトラクション量です、通常のリトラクション量の比率で指定します。" msgid "Retract when change layer" msgstr "積層変更時のリトラクション" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "この設定により、積層を変更時にリトラクションを実行します。" msgid "Retraction Length" @@ -11682,67 +14003,64 @@ msgstr "リトラクション長さ" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"ノズルが長い距離で移動する時に、リトラクションの量です。値が0の場合、リトラク" -"ションが無効になります。" -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" -msgid "Z hop when retract" -msgstr "リトラクト時にZ方向調整" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "リトラクション時に、ノズルを少し上げてから移動します。この動作でモデルとの衝" "突を回避できます。" -msgid "Z hop lower boundary" -msgstr "Z hop lower boundary" +msgid "Z-hop lower boundary" +msgstr "" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" -msgid "Z hop upper boundary" -msgstr "Z hop upper boundary" +msgid "Z-hop upper boundary" +msgstr "" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" -msgid "Z hop type" +msgid "Z-hop type" +msgstr "" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" @@ -11755,8 +14073,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -11779,7 +14097,7 @@ msgid "On surfaces" msgstr "" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" @@ -11795,8 +14113,20 @@ msgstr "" msgid "Top and Bottom" msgstr "" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "ボーデン" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" -msgstr "Extra length on restart" +msgstr "" msgid "" "When the retraction is compensated after the travel move, the extruder will " @@ -11815,26 +14145,27 @@ msgstr "" msgid "Retraction Speed" msgstr "リトラクション速度" -msgid "Speed of retractions" -msgstr "リトラクションの速度です。" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "復帰速度" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"リトラクション後フィラメントをロードする時の速度です、値が0の場合、リトラク" -"ションの速度と同じくなります。" msgid "Use firmware retraction" -msgstr "Use firmware retraction" +msgstr "" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" +"この試用的な設定で、G10およびG11コマンドを使用して、ファームウェア吸込み(リト" +"ラクション)を行うことができます。 これは最近のMarlinでのみサポートされていま" +"す。" msgid "Show auto-calibration marks" msgstr "" @@ -11843,13 +14174,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "継ぎ目位置" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "各パーツに対して、外壁を造形時の開始位置です。" msgid "Nearest" @@ -11858,6 +14189,9 @@ msgstr "最寄り" msgid "Aligned" msgstr "整列" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "背面" @@ -11875,7 +14209,7 @@ msgstr "" "成するものです。" msgid "Seam gap" -msgstr "Seam gap" +msgstr "" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -11889,20 +14223,17 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use scarf joint to minimize seam visibility and increase seam strength." msgid "Conditional scarf joint" -msgstr "Conditional scarf joint" +msgstr "" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Apply scarf joints only to smooth perimeters where traditional seams do not " -"conceal the seams at sharp corners effectively." msgid "Conditional angle threshold" -msgstr "Conditional angle threshold" +msgstr "" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -11929,13 +14260,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -11945,52 +14276,48 @@ msgid "This factor affects the amount of material for scarf joints." msgstr "" msgid "Scarf start height" -msgstr "Scarf start height" +msgstr "" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." msgid "Scarf around entire wall" -msgstr "Scarf around entire wall" +msgstr "" msgid "The scarf extends to the entire length of the wall." -msgstr "The scarf extends to the entire length of the wall." +msgstr "" msgid "Scarf length" -msgstr "Scarf length" +msgstr "" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." msgid "Scarf steps" -msgstr "Scarf steps" +msgstr "" msgid "Minimum number of segments of each scarf." -msgstr "Minimum number of segments of each scarf." +msgstr "" msgid "Scarf joint for inner walls" -msgstr "Scarf joint for inner walls" +msgstr "" msgid "Use scarf joint for inner walls as well." -msgstr "Use scarf joint for inner walls as well." +msgstr "" msgid "Role base wipe speed" msgstr "" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" msgid "Wipe on loops" @@ -12005,42 +14332,55 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" -msgstr "Wipe speed" +msgstr "" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" -msgstr "" -"The wipe speed is determined by the speed setting specified in this " "configuration. If the value is expressed as a percentage (e.g. 80%), it will " "be calculated based on the travel speed setting above. The default value for " "this parameter is 80%." +msgstr "" msgid "Skirt distance" msgstr "スカート距離" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "スカートからブリム或はオブジェクトまでの距離です。" -msgid "Skirt height" -msgstr "Skirt height" +msgid "Skirt start point" +msgstr "" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Number of skirt layers: usually only one" +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" + +msgid "Skirt height" +msgstr "" + +msgid "How many layers of skirt. Usually only one layer." +msgstr "" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "保護シールド" @@ -12048,27 +14388,33 @@ msgstr "保護シールド" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" -msgstr "限定" - msgid "Enabled" msgstr "有効" +msgid "Skirt type" +msgstr "" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" + +msgid "Per object" +msgstr "" + msgid "Skirt loops" msgstr "スカートのループ数" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "スカートのループ数です、値が0の場合、スカートが無効になります。" msgid "Skirt speed" @@ -12084,13 +14430,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "積層造形時間がこの値より短い時に、より良い冷却を図るため速度を落とします。" @@ -12099,46 +14448,70 @@ msgstr "スパース インフィルの下閾値" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "スパース インフィルの面積がこの値以下の場合、ソリッド インフィルに変換されま" "す" +msgid "Solid infill" +msgstr "ソリッドインフィル" + +msgid "Filament to print solid infill." +msgstr "" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "ソリッド インフィルの造形速度です。" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "スパイラルモードでは、輪郭面を一筆書きで造形します。Z方向の移動に段差がないの" "で、シームはありません。" msgid "Smooth Spiral" -msgstr "Smooth Spiral" +msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" msgid "Max XY Smoothing" -msgstr "Max XY Smoothing" - -msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" msgstr "" + +#, no-c-format, no-boost-format +msgid "" "Maximum distance to move points in XY to try to achieve a smooth spiral. If " -"expressed as a %, it will be computed over nozzle diameter" +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12161,19 +14534,44 @@ msgstr "通常" msgid "Temperature variation" msgstr "軟化温度" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "スタートG-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "造形開始時のG-code" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "このフィラメントを使用開始時のG-code" msgid "Single Extruder Multi Material" msgstr "シングルエクストルーダー・マルチマテリアル" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" msgid "Manual Filament Change" @@ -12190,7 +14588,7 @@ msgstr "" msgid "Purge in prime tower" msgstr "" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "" msgid "Enable filament ramming" @@ -12200,8 +14598,8 @@ msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12229,9 +14627,6 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." msgid "Slicing Mode" msgstr "スライシングモード" @@ -12240,14 +14635,12 @@ msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " -"close all holes in the model." msgid "Regular" msgstr "レギュラー" msgid "Even-odd" -msgstr "Even-odd" +msgstr "" msgid "Close holes" msgstr "穴を閉じる" @@ -12273,29 +14666,35 @@ msgid "Enable support generation." msgstr "この設定によりサポート生成を有効になります。" msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" -msgstr "通常 (自動) と ツリー (自動) では自動でサポートを作成します。" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." +msgstr "" -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "通常 (自動)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "ツリー (自動)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "通常 (手動)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "ツリー (手動)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "水平間隔" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "オブジェクトとサポートのXY距離です。" +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "パターン角度" @@ -12305,7 +14704,7 @@ msgstr "この設定でサポートのパターンを回転させます。" msgid "On build plate only" msgstr "ビルドプレートのみ" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "この設定により、プレートから生成するサポートのみを造形します。" msgid "Support critical regions only" @@ -12316,41 +14715,40 @@ msgid "" "etc." msgstr "造形しにくい部分だけサポートを生成します、例えば細長いしっぽ、ハリなど" -msgid "Remove small overhangs" -msgstr "Remove small overhangs" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "This removes small overhangs that may need no support." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "トップ面とのZ間隔" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "サポート接触面とオブジェクトのZ方向の間隔" msgid "Bottom Z distance" msgstr "底面とのZ間隔" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "サポート底面とオブジェクトのZ方向間隔" msgid "Support/raft base" -msgstr "Support/raft base" +msgstr "" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "サポートとラフトを造形用のフィラメント。「デフォルト」では当時のフィラメント" "を使用する意味です。" msgid "Avoid interface filament for base" -msgstr "Avoid interface filament for base" +msgstr "" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Avoid using support interface filament to print support base if possible." msgid "" "Line width of support. If expressed as a %, it will be computed over the " @@ -12367,11 +14765,11 @@ msgstr "" "なっています。" msgid "Support/raft interface" -msgstr "Support/raft interface" +msgstr "" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "サポートの接触面用のフィラメントです。「デフォルト」では指定しなく、当時の" "フィラメントを使用する意味です。" @@ -12379,37 +14777,39 @@ msgstr "" msgid "Top interface layers" msgstr "トップ接触面の層数" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "トップ接触面の層数" msgid "Bottom interface layers" msgstr "底部接触面層数" -msgid "Number of bottom interface layers" -msgstr "Number of bottom interface layers" +msgid "Number of bottom interface layers." +msgstr "" msgid "Same as top" -msgstr "Same as top" +msgstr "" msgid "Top interface spacing" msgstr "トップ接触面間隔" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "接触面を造形時に線の距離です。0はソリッド接触面です。" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "底部接触面間隔" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "底部接触面を造形時に線の距離です。0はソリッド接触面です。" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "サポート接触面の造形速度です。" msgid "Base pattern" msgstr "基本パターン" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "サポートのサターンです。" msgid "Rectilinear grid" @@ -12424,27 +14824,27 @@ msgstr "接触面パターン" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "サポート接触面のパターンです。非可溶性材を使用する場合はRectilinear、可溶性材" "を使用する場合同心です。" msgid "Rectilinear Interlaced" -msgstr "Rectilinear Interlaced" +msgstr "" msgid "Base pattern spacing" msgstr "基本パターン間隔" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "サポートの線の間隔です" msgid "Normal Support expansion" msgstr "通常サポート拡大" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "+/-でサポートの水平サイズを調整します" -msgid "Speed of support" +msgid "Speed of support." msgstr "サポートの造形速度です。" msgid "" @@ -12457,8 +14857,14 @@ msgid "" "overhangs." msgstr "" +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" -msgstr "Snug" +msgstr "" + +msgid "Organic" +msgstr "オーガニック" msgid "Tree Slim" msgstr "ツリースリム" @@ -12469,20 +14875,14 @@ msgstr "ツリーストロング" msgid "Tree Hybrid" msgstr "ツリーハイブリッド" -msgid "Organic" -msgstr "オーガニック" - msgid "Independent support layer height" msgstr "独立サポート層ピッチ" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " -"when the prime tower is enabled." msgid "Threshold angle" msgstr "閾値角度" @@ -12492,12 +14892,21 @@ msgid "" "threshold." msgstr "オーバーハングの角度がこの閾値以下になる場合、サポートを生成します" +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "ツリーサポート枝アングル" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "ツリータイプのサポートを造形する時の最大オーバーハング最大角度です。この値が" @@ -12538,26 +14947,18 @@ msgstr "" "の高いインターフェースが必要な場合は、枝密度を高めるのではなく、トップサポー" "トのインターフェースを有効にすることをお勧めします。" -msgid "Adaptive layer height" -msgstr "アダプティブ積層ピッチ" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - msgid "Auto brim width" -msgstr "" +msgstr "オートブリム幅" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" msgid "Tree support brim width" -msgstr "Tree support brim width" +msgstr "ツリーサポートブリム幅" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" msgid "Tip Diameter" @@ -12588,63 +14989,88 @@ msgstr "" "太さが一定になります。少し角度をつけると、オーガニックサポートの安定性が増し" "ます。" -msgid "Branch Diameter with double walls" -msgstr "二重ウォール枝径" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"この直径の円の面積よりも大きな面積を持つ枝は、安定性向上のためために二重" -"ウォールでプリントされます。 二重ウォールにしないときは、この値をゼロに設定し" -"ます。" - msgid "Support wall loops" -msgstr "Support wall loops" +msgstr "サポートのウォール数" -msgid "This setting specify the count of walls around support" -msgstr "This setting specify the count of walls around support" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "サポートの壁面（ウォール）層数を0から2の範囲で指定します。0は自動。" msgid "Tree support with infill" msgstr "ツリーサポートインフィル使用" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "この設定により、大きいツリーサポートを造形する時に、インフィルを追加します。" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" msgid "Chamber temperature" -msgstr "Chamber temperature" +msgstr "庫内温度" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on. At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials, the actual chamber temperature should not " -"be high to avoid clogs, so 0 (turned off) is highly recommended." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "1層目後のノズル温度" msgid "Detect thin wall" @@ -12652,17 +15078,17 @@ msgstr "薄い壁を検出" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "2ラインの入らない薄い壁面を検出し、1ラインで造形します。仕上がりが悪くなり可" "能性があります。" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "フィラメントを切り替える直後に実行するG-codeです。" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" msgid "" @@ -12670,7 +15096,7 @@ msgid "" "the nozzle diameter." msgstr "" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "トップ面のインフィルの造形速度です。" msgid "Top shell layers" @@ -12679,7 +15105,7 @@ msgstr "トップ面層数" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "トップ面に使用するソリッド層数です。この値がトップ面の厚みより小さい場合、層" "数を増やして厚みに合わせます。" @@ -12694,22 +15120,43 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "トップ面の厚さです、トップ面層数で決まった厚みがこの値より小さい場合、層数を" "増やします。この値が0にする場合、この設定が無効となり、設定した層数で造形しま" "す。" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "移動完了時の速度です。" msgid "Wipe while retracting" msgstr "リトラクション時に拭き上げ" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "リトラクション時に、ノズルを最後のパスに沿って移動します。この設定によって、" "たるみにより壁面のブロブを抑えることができます。" @@ -12718,12 +15165,11 @@ msgid "Wipe Distance" msgstr "拭き上げ距離" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -12738,6 +15184,12 @@ msgstr "" "the chamber pressure inside the nozzle in order to avoid appearance defects " "when printing objects." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "フラッシュ体積" @@ -12755,15 +15207,20 @@ msgstr "プライム量" msgid "The volume of material to prime extruder on tower." msgstr "フィラメントのフラッシュ量です。" -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "プライムタワーの幅です。" msgid "Wipe tower rotation angle" msgstr "ワイプタワーの回転角" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "x軸に対するワイプタワーの回転角度。" +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "スタビライザーコーンの頂角" @@ -12774,12 +15231,6 @@ msgstr "" "ワイプタワーを安定させるために使用される円錐の頂点の角度。角度が大きいと底面" "が広くなります。" -msgid "Wipe tower purge lines spacing" -msgstr "ワイプタワーのパージラインの間隔" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "ワイプタワーのパージラインの間隔。" - msgid "Maximum wipe tower print speed" msgstr "" @@ -12797,7 +15248,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -12805,8 +15256,38 @@ msgid "" "regardless of this setting." msgstr "" -msgid "Wipe tower extruder" -msgstr "ワイプタワーエクストルーダー" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -12827,6 +15308,18 @@ msgstr "" "必要なボリュームが保存されます。 これらの値は、以下の完全なパージボリュームの" "作成を簡素化するために使用されます。" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -12847,8 +15340,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "このオブジェクトは廃料で造形されます。時間とフィラメントの節約として有効的で" "すが、色の指定ができなくなります。プライムタワーが有効になる場合、この設定が" @@ -12860,13 +15353,41 @@ msgstr "ブリッジ最大距離" msgid "Maximal distance between supports on sparse infill sections." msgstr "中抜きインフィルレイヤーの間隔の最大値。" +msgid "Wipe tower purge lines spacing" +msgstr "ワイプタワーのパージラインの間隔" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "ワイプタワーのパージラインの間隔。" + +msgid "Extra flow for purging" +msgstr "パージ用の余分の量" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"ワイプタワーのパージラインで使用される余分の量。 これによって、パージラインが" +"通常よりも太くなったり、細くなったりします。 間隔は自動的に調整されます。" + +msgid "Idle temperature" +msgstr "アイドリング温度" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" + msgid "X-Y hole compensation" msgstr "ホール補正 X-Y" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "オブジェクトの穴の大きさの調整値。正数は穴を大きくし、負数は穴を小さくしま" "す。この機能はパーツを組立てる為に、はめあいの微調査です。" @@ -12874,11 +15395,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "輪郭補正 X-Y" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "オブジェクトの輪郭の大きさの調整値です。正数は大きくし、負数は小さくします。" "これがパーツを組み立てる為にはめあいの微調整です。" @@ -12900,7 +15422,7 @@ msgstr "" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -12918,38 +15440,37 @@ msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" +"次の形式で.gcodeおよび.sl1 / .sl1sファイルに保存される画像サイズ：\"XxY, " +"XxY, ...\"" msgid "Format of G-code thumbnails" msgstr "Gコードサムネイルのフォーマット" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Gコードサムネイルのフォーマット。PNGは最高の品質、JPGは最小のサイズ、QOIは低" "メモリのファームウェアのため" msgid "Use relative E distances" -msgstr "Use relative E distances" +msgstr "" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "クラシックでは従来通りの壁面を生成しますが、Arachneでは押出線幅が可変になりま" "す。" -msgid "Classic" -msgstr "クラシック" - msgid "Arachne" msgstr "Arachne" @@ -12959,11 +15480,8 @@ msgstr "壁面遷移長さ" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" -"When transitioning between different numbers of walls as the part becomes " -"thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" msgid "Wall transitioning filter margin" msgstr "フィルタマージン" @@ -12975,15 +15493,8 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Prevent transitioning back and forth between one extra wall and one less. " -"This margin extends the range of extrusion widths which follow to [Minimum " -"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " -"margin reduces the number of transitions, which reduces the number of " -"extrusion starts/stops and travel time. However, large extrusion width " -"variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" msgid "Wall transitioning threshold angle" msgstr "角度閾値" @@ -12993,20 +15504,15 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"When to create transitions between even and odd numbers of walls. A wedge " -"shape with an angle greater than this setting will not have transitions and " -"no walls will be printed in the center to fill the remaining space. Reducing " -"this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" msgid "Wall distribution count" msgstr "壁面分布カウント" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "壁の層数" msgid "Minimum feature size" @@ -13014,10 +15520,10 @@ msgstr "最小サイズ" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" -msgstr "小部分の厚さ下限。モデルに厚さがこの値以下になる部分を造形しません。" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." +msgstr "" msgid "Minimum wall length" msgstr "" @@ -13027,9 +15533,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" @@ -13049,56 +15555,173 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" -"Width of the wall that will replace thin features (according to the Minimum " -"feature size) of the model. If the Minimum wall width is thinner than the " -"thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" msgid "Detect narrow internal solid infill" msgstr "薄いソリッド インフィル検出" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする場" "合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用しま" "す。" msgid "invalid value " -msgstr "invalid value " +msgstr "" msgid "Invalid value when spiral vase mode is enabled: " -msgstr "Invalid value when spiral vase mode is enabled: " +msgstr "" msgid "too large line width " -msgstr "too large line width " +msgstr "" msgid " not in range " -msgstr " not in range " +msgstr "" + +msgid "Export 3MF" +msgstr "3mf をエクスポート" + +msgid "Export project as 3MF." +msgstr "プロジェクトを3MF式で出力" + +msgid "Export slicing data" +msgstr "スライスデータをエクスポート" + +msgid "Export slicing data to a folder." +msgstr "スライスデータをエクスポート" + +msgid "Load slicing data" +msgstr "スライスデータを読込み" + +msgid "Load cached slicing data from directory." +msgstr "スライスデータを読込み" + +msgid "Export STL" +msgstr "" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "スライス" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "プレートをスライス: 0: 全て, i:プレートi, その他: 無効" + +msgid "Show command help." +msgstr "ヘルプを表示します。" + +msgid "UpToDate" +msgstr "最新の状態です。" + +msgid "Update the config values of 3MF to latest." +msgstr "3mfの構成値を更新" + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "" + +msgid "Load first filament as default for those not loaded." +msgstr "" msgid "Minimum save" msgstr "" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." +msgstr "" + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "" + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." msgstr "" msgid "No check" -msgstr "No check" +msgstr "" -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "Do not run any validity checks, such as G-code path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" + +msgid "Normative check" +msgstr "" + +msgid "Check the normative items." +msgstr "" + +msgid "Output Model Info" +msgstr "出力モデル情報" + +msgid "Output the model's information." +msgstr "出力するモデル情報です。" + +msgid "Export Settings" +msgstr "エクスポート設定" + +msgid "Export settings to a file." +msgstr "設定をファイルにエクスポートします。" + +msgid "Send progress to pipe" +msgstr "パイプに進捗を送信" + +msgid "Send progress to pipe." +msgstr "パイプに進捗を送信" + +msgid "Arrange Options" +msgstr "レイアウト設定" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "レイアウト設定: 0: 無効　1: 有効　その他: 自動" + +msgid "Repetition count" +msgstr "" + +msgid "Repetition count of the whole model." +msgstr "" msgid "Ensure on bed" msgstr "ベッド上で確認" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"モデルをプリントパッド上に配置し、それらを1つのモデルにマージして、一度で実行" +"できるようにします。" + +msgid "Convert Unit" +msgstr "単位変換" + +msgid "Convert the units of model." +msgstr "モデルの単位を変換" + msgid "Orient Options" msgstr "" @@ -13108,12 +15731,80 @@ msgstr "" msgid "Rotation angle around the Z axis in degrees." msgstr "Z軸周りの回転角度(度)。" +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "Y軸周りの回転" msgid "Rotation angle around the Y axis in degrees." msgstr "Y軸を中心とした回転角（度単位）。" +msgid "Scale the model by a float factor." +msgstr "指定した比率で伸縮する" + +msgid "Load General Settings" +msgstr "一般設定を読込む" + +msgid "Load process/machine settings from the specified file." +msgstr "指定ファイルから設定値を読込む" + +msgid "Load Filament Settings" +msgstr "フィラメント設定を読込む" + +msgid "Load filament settings from the specified file list." +msgstr "指定したファイルリストからフィラメント設定を読込む" + +msgid "Skip Objects" +msgstr "オブジェクトスキップ" + +msgid "Skip some objects in this print." +msgstr "" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "データディレクトリー" @@ -13125,22 +15816,106 @@ msgstr "" "指定されたディレクトリで設定を読込み/保存します。 これは、異なるプロファイル" "を維持したり、ネットワークストレージからの構成を含めたりするのに役立ちます。" -msgid "Load custom gcode" +msgid "Output directory" +msgstr "出力先フォルダ" + +msgid "Output directory for the exported files." +msgstr "エクスポートの出力先フォルダです。" + +msgid "Debug level" +msgstr "デバッグ レベル" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、4:" +"debug、5:trace。\n" + +msgid "Enable timelapse for print" msgstr "" -msgid "Load custom gcode from json" +msgid "If enabled, this slicing will be considered using timelapse." msgstr "" -msgid "Current z-hop" +msgid "Load custom G-code" +msgstr "" + +msgid "Load custom G-code from json." +msgstr "" + +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" msgstr "現在のz-hop" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "カスタムGコードブロックの先頭に存在するz-hopを含む。" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "カスタム G コード ブロックの先頭のエクストルーダーのモーターの位置。 カスタ" "ム G コードで動かしたとき、PrusaSlicer が制御を取り戻したときにどこから移動し" @@ -13149,20 +15924,30 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "カスタム G コード ブロックの先頭のリトラクション状態。 カスタム G コードがエ" "クストルーダー軸を動かすとき、PrusaSlicer が制御を取り戻したときに正しく撤回" "できるように、この変数に書き込む必要があります。" -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "追加リトラクションからの復帰" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" "現在、リトラクションからの復帰時のエクストルーダーの追加プライミングが計画さ" "れています。" +msgid "Absolute E position" +msgstr "絶対Eポジション" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"エクストルーダー軸の現在のポジション。 絶対エクストルーダーアドレス指定でのみ" +"使用されます。" + msgid "Current extruder" msgstr "現在のエクストルーダー" @@ -13208,8 +15993,18 @@ msgstr "" msgid "Is extruder used?" msgstr "エクストルーダーは使用されましたか？" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" +"指定されたエクストルーダーがプリントで使用されるかどうかを示すブール値のベク" +"トル。" + +msgid "Has single extruder MM priming" +msgstr "シングルエクストルーダーのMMプライミングあり" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"このプリントでは追加のマルチマテリアルプライミング領域が使用されていますか?" msgid "Volume per extruder" msgstr "エクストルーダーあたりの体積" @@ -13217,10 +16012,10 @@ msgstr "エクストルーダーあたりの体積" msgid "Total filament volume extruded per extruder during the entire print." msgstr "プリント全体でエクストルーダーごとに押し出されたフィラメントの総量。" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "プリント中のツール交換の数。" msgid "Total volume" @@ -13271,7 +16066,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -13280,14 +16075,16 @@ msgstr "拡張子を除いたファイル名を入力。" msgid "Source filename of the first object, without extension." msgstr "最初のオブジェクトのソース ファイル名（拡張子を除く）。" +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "ベクトルには、点の x 座標と y 座標という 2 つの要素があります。 値は mm 単位" "です。" +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "ベクトルには、境界ボックスの x 次元と y 次元という 2 つの要素があります。 値" @@ -13334,6 +16131,9 @@ msgstr "時" msgid "Minute" msgstr "分" +msgid "Second" +msgstr "秒" + msgid "Print preset name" msgstr "プリセット名をプリント" @@ -13362,13 +16162,22 @@ msgstr "物理プリンター名" msgid "Name of the physical printer used for slicing." msgstr "スライスに使用される物理プリンターの名前。" +msgid "Number of extruders" +msgstr "エクストルーダー数" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"現在のプリントで使用されているかどうかに関係ない、エクストルーダーの合計数。" + msgid "Layer number" msgstr "レイヤーナンバー" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -13376,7 +16185,7 @@ msgid "" "layer." msgstr "プリント ベッド上の現在のレイヤーの高さ (レイヤーの最上部までの計測)。" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -13403,28 +16212,26 @@ msgstr "インフィルパスを生成" msgid "Detect overhangs for auto-lift" msgstr "オーバーハング自動検出" -msgid "Generating support" -msgstr "サポートを生成" - msgid "Checking support necessity" msgstr "サポートの必要性を確認" msgid "floating regions" -msgstr "floating regions" +msgstr "" msgid "floating cantilever" -msgstr "floating cantilever" +msgstr "" msgid "large overhangs" -msgstr "large overhangs" +msgstr "" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"It seems object %s has %s. Please re-orient the object or enable support " -"generation." + +msgid "Generating support" +msgstr "サポートを生成" msgid "Optimizing toolpath" msgstr "ツールパスを最適化" @@ -13436,150 +16243,121 @@ msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"No layers were detected. You might want to repair your STL file(s) or check " -"their size or thickness and retry.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"An object's XY size compensation will not be used because it is also color-" -"painted.\n" -"XY Size compensation can not be combined with color-painting." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "サポート: 積層%dのツールパスを生成" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "サポート: オーバーハングを検出" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "サポート: 接触点を生成" -msgid "Support: propagate branches" -msgstr "サポート: ブランチを生成" +msgid "Loading of a model file failed." +msgstr "" -msgid "Support: draw polygons" -msgstr "サポート: ポリゴンを作成" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "サポート: ツールパスを生成" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "サポート: 積層%dのポリゴンを生成" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "サポート: 積層%dの穴を修正" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "サポート: 積層%dのブランチを生成" +msgid "The supplied file couldn't be read because it's empty" +msgstr "" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unknown file format: input file must have .stl, .obj, or .amf(.xml) " -"extension." - -msgid "Loading of a model file failed." -msgstr "Loading of model file failed." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "The supplied file couldn't be read because it's empty." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "Unknown file format: input file must have .3mf or .zip.amf extension." - -msgid "Canceled" -msgstr "Canceled" +msgstr "" msgid "load_obj: failed to parse" -msgstr "load_obj: failed to parse" +msgstr "" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "" msgid "The file contains polygons with more than 4 vertices." -msgstr "The file contains polygons with more than 4 vertices." +msgstr "" msgid "The file contains polygons with less than 2 vertices." -msgstr "The file contains polygons with less than 2 vertices." +msgstr "" msgid "The file contains invalid vertex index." -msgstr "The file contains invalid vertex index." +msgstr "" msgid "This OBJ file couldn't be read because it's empty." -msgstr "This OBJ file couldn't be read because it's empty." +msgstr "" msgid "Flow Rate Calibration" -msgstr "Flow Rate Calibration" +msgstr "" msgid "Max Volumetric Speed Calibration" -msgstr "Max Volumetric Speed Calibration" +msgstr "" msgid "Manage Result" -msgstr "Manage Results" +msgstr "" msgid "Manual Calibration" -msgstr "Manual Calibration" +msgstr "" msgid "Result can be read by human eyes." -msgstr "Results can be easily seen and understood." +msgstr "" msgid "Auto-Calibration" -msgstr "Auto-Calibration" +msgstr "" msgid "We would use Lidar to read the calibration result" -msgstr "We would use Lidar to read the calibration result." +msgstr "" msgid "Prev" -msgstr "Prev" +msgstr "" msgid "Recalibration" -msgstr "Recalibration" +msgstr "" msgid "Calibrate" -msgstr "Calibrate" +msgstr "" msgid "Finish" msgstr "完了" msgid "How to use calibration result?" -msgstr "How can I use calibration results?" +msgstr "" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" -"You can change the Flow Dynamics Calibration Factor in material editing" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" -"The current firmware version of the printer does not support calibration.\n" -"Please update the printer firmware." msgid "Calibration not supported" -msgstr "Calibration not supported" +msgstr "" msgid "Error desc" -msgstr "Error desc" +msgstr "" msgid "Extra info" -msgstr "Extra info" +msgstr "" msgid "Flow Dynamics" -msgstr "Flow Dynamics" +msgstr "" msgid "Flow Rate" -msgstr "Flow Rate" +msgstr "" msgid "Max Volumetric Speed" -msgstr "Max Volumetric Speed" +msgstr "" #, c-format, boost-format msgid "" @@ -13587,69 +16365,62 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" -"Please input valid values:\n" -"Start value: >= %.1f\n" -"End value: <= %.1f\n" -"End value: > Start value\n" -"Value step: >= %.3f)" msgid "The name cannot be empty." -msgstr "The name cannot be empty." +msgstr "" + +#, c-format, boost-format +msgid "The selected preset: %s was not found." +msgstr "" + +msgid "The name cannot be the same as the system preset name." +msgstr "" + +msgid "The name is the same as another existing preset name" +msgstr "" + +msgid "create new preset failed." +msgstr "" #, c-format, boost-format msgid "The selected preset: %s is not found." -msgstr "The selected preset: %s is not found." +msgstr "" -msgid "The name cannot be the same as the system preset name." -msgstr "The name cannot be the same as the system preset name." - -msgid "The name is the same as another existing preset name" -msgstr "The name is the same as another existing preset name." - -msgid "create new preset failed." -msgstr "Creating new preset failed." +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Are you sure you want to cancel the current calibration and return to the " -"home page?" msgid "No Printer Connected!" -msgstr "No Printer Connected!" +msgstr "" msgid "Printer is not connected yet." -msgstr "A printer is not connected yet." +msgstr "" msgid "Please select filament to calibrate." -msgstr "Please select filament to calibrate." +msgstr "" msgid "The input value size must be 3." -msgstr "The input value size must be 3." +msgstr "" msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" -msgid "Connecting to printer..." -msgstr "Connecting to printer..." - -msgid "The failed test result has been dropped." -msgstr "The failed test result has been removed." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Flow Dynamics Calibration results have been saved to the printer." +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13657,32 +16428,43 @@ msgid "" "Only one of the results with the same name is saved. Are you sure you want " "to override the historical result?" msgstr "" -"There is already a previous calibration result with the same name: %s. Only " -"one result with a name is saved. Are you sure you want to overwrite the " -"previous result?" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." + +msgid "Connecting to printer..." +msgstr "" + +msgid "The failed test result has been dropped." +msgstr "" + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" msgid "Internal Error" -msgstr "Internal Error" +msgstr "" msgid "Please select at least one filament for calibration" -msgstr "Please select at least one filament for calibration" +msgstr "" -msgid "Flow rate calibration result has been saved to preset" -msgstr "Flow rate calibration results have been saved to preset." +msgid "Flow rate calibration result has been saved to preset." +msgstr "" -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "" msgid "When do you need Flow Dynamics Calibration" -msgstr "When do you need Flow Dynamics Calibration?" +msgstr "" msgid "" "We now have added the auto-calibration for different filaments, which is " @@ -13690,21 +16472,13 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" -"3. If the max volumetric speed or print temperature is changed in the " -"filament setting." -msgstr "" -"We now have added auto-calibration for different filaments, which is fully " -"automated and the result will be saved to the printer for future use. You " -"only need to do the calibration in the following limited cases:\n" -"1. If you introduce a new filament of different brands/models or the " -"filament is damp\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." +msgstr "" msgid "About this calibration" -msgstr "About this calibration" +msgstr "" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" @@ -13725,39 +16499,44 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"フローダイナミクスキャリブレーションの詳細については、当社のWikiをご覧くださ" +"い。\n" +"通常、キャリブレーションは不要です。単一の色や材料で印刷を開始する際に、「フ" +"ローダイナミクスキャリブレーション」オプションが印刷開始メニューでチェックさ" +"れていると、プリンターは従来の方法に従い、印刷前にフィラメントをキャリブレー" +"ションします。複数の色や材料で印刷を開始する場合、プリンターはフィラメントが" +"切り替わるたびにデフォルトの補正パラメーターを使用し、ほとんどの場合良好な結" +"果が得られます。\n" +"\n" +"注意点として、キャリブレーション結果が信頼できない原因となる場合がいくつかあ" +"ります。例えば、ビルドプレートの接着が不十分な場合です。接着力を向上させるに" +"は、ビルドプレートを洗浄したり、糊を塗布することが有効です。このトピックに関" +"する詳細については、当社のWikiを参照してください。\n" +"\n" +"我々の検証によるとキャリブレーション結果には約10％のジッターがあり、各キャリ" +"ブレーションで結果が完全に一致しない場合があります。現在、その根本原因を調査" +"しており、新しいアップデートで改善を行う予定です。" msgid "When to use Flow Rate Calibration" -msgstr "When to use Flow Rate Calibration" +msgstr "" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" "PLA used in RC planes. These materials expand greatly when heated, and " "calibration provides a useful reference flow rate." msgstr "" -"In addition, Flow Rate Calibration is crucial for foaming materials like LW-" -"PLA used in RC planes. These materials expand greatly when heated, and " -"calibration provides a useful reference flow rate." msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " @@ -13767,12 +16546,6 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"Flow Rate Calibration measures the ratio of expected to actual extrusion " -"volumes. The default setting works well with Bambu Lab printers and official " -"filaments as they were pre-calibrated and fine-tuned. For a regular " -"filament, you usually won't need to perform a Flow Rate Calibration unless " -"you still see the listed defects after you have done other calibrations. For " -"more details, please check out our wiki article." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -13792,100 +16565,67 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not " -"be suitable for this calibration and can produce less-than-desirable " -"results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before performing it." msgid "When you need Max Volumetric Speed Calibration" -msgstr "When you need Max Volumetric Speed Calibration" +msgstr "" msgid "Over-extrusion or under extrusion" -msgstr "Over-extrusion or under extrusion" +msgstr "" msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "Max Volumetric Speed Calibration is recommended when you print with:" +msgstr "" msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "material with significant thermal shrinkage/expansion, such as..." +msgstr "" msgid "materials with inaccurate filament diameter" -msgstr "materials with inaccurate filament diameter" +msgstr "" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "We found the best Flow Dynamics Calibration Factor." +msgstr "" msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." msgstr "" -"Part of the calibration failed! It may help to clean the plate and retry. " -"The failed test result will be deleted." msgid "" "*We recommend you to add brand, materia, type, and even humidity level in " "the Name" msgstr "" -"*We recommend that you add brand, material, type, and even humidity level to " -"the name" - -msgid "Failed" -msgstr "失敗" msgid "Please enter the name you want to save to printer." -msgstr "Please enter the name you want to save to printer." +msgstr "" msgid "The name cannot exceed 40 characters." -msgstr "The name cannot exceed 40 characters." - -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" msgstr "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to replace the other results?" msgid "Please find the best line on your plate" -msgstr "Please find the best line on your plate." +msgstr "" msgid "Please find the corner with perfect degree of extrusion" -msgstr "Please find the corner with the perfect degree of extrusion" +msgstr "" msgid "Input Value" -msgstr "Input Value" +msgstr "" msgid "Save to Filament Preset" -msgstr "Save to Filament Presets" - -msgid "Preset" -msgstr "Preset" +msgstr "" msgid "Record Factor" -msgstr "Record Factor" +msgstr "" msgid "We found the best flow ratio for you" -msgstr "We found the best flow ratio for you." +msgstr "" msgid "Flow Ratio" -msgstr "Flow Ratio" +msgstr "" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "Please input a valid value (0.0 < flow ratio < 2.0)" +msgstr "" msgid "Please enter the name of the preset you want to save." -msgstr "Please enter the name of the preset you want to save." +msgstr "" msgid "Calibration1" msgstr "Calibration1" @@ -13894,156 +16634,192 @@ msgid "Calibration2" msgstr "Calibration2" msgid "Please find the best object on your plate" -msgstr "Please find the best object on your plate." +msgstr "" msgid "Fill in the value above the block with smoothest top surface" -msgstr "Fill in the value from the block with smoothest top surface" +msgstr "" msgid "Skip Calibration2" -msgstr "Skip Calibration 2" +msgstr "" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "flow ratio: %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "Please choose the block with the smoothest top surface." +msgstr "" msgid "Please choose a block with smoothest top surface." -msgstr "Please choose the block with the smoothest top surface." +msgstr "" msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)" +msgstr "" msgid "Calibration Type" -msgstr "Calibration Type" +msgstr "" msgid "Complete Calibration" -msgstr "Complete Calibration" +msgstr "" msgid "Fine Calibration based on flow ratio" -msgstr "Fine Calibration based on flow ratio" +msgstr "" msgid "Title" -msgstr "Title" +msgstr "" msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"A test model will be printed. Please clear the build plate and place it back " -"on the heatbed before calibration." msgid "Printing Parameters" -msgstr "Printing Parameters" +msgstr "" + +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" msgid "Plate Type" -msgstr "Plate Type" +msgstr "" msgid "filament position" -msgstr "filament position" - -msgid "External Spool" -msgstr "External Spool" +msgstr "" msgid "Filament For Calibration" -msgstr "Filament For Calibration" +msgstr "" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" -"Tips for calibration material: \n" -"- Materials that can share same hot bed temperature\n" -"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte, " -"etc.)" msgid "Pattern" -msgstr "Pattern" +msgstr "" msgid "Method" -msgstr "Method" +msgstr "" #, c-format, boost-format msgid "%s is not compatible with %s" -msgstr "%s is not compatible with %s" +msgstr "" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "TPU is not supported by Flow Dynamics Auto-Calibration." +msgstr "" + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" msgid "Connecting to printer" -msgstr "Connecting to printer" +msgstr "" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" msgid "From k Value" -msgstr "From k Value" +msgstr "" msgid "To k Value" -msgstr "To k Value" +msgstr "" msgid "Step value" msgstr "" msgid "The nozzle diameter has been synchronized from the printer Settings" -msgstr "The nozzle diameter has been synchronized from the printer settings." +msgstr "" msgid "From Volumetric Speed" -msgstr "From Volumetric Speed" +msgstr "" msgid "To Volumetric Speed" -msgstr "To Volumetric Speed" +msgstr "" + +msgid "Are you sure you want to cancel this print?" +msgstr "現在の造形をキャンセルしても宜しいでしょうか？" msgid "Flow Dynamics Calibration Result" -msgstr "Flow Dynamics Calibration Result" +msgstr "" msgid "New" -msgstr "New" +msgstr "" msgid "No History Result" -msgstr "No History Result" +msgstr "" msgid "Success to get history result" -msgstr "Success to get history result" +msgstr "" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "Refreshing the previous Flow Dynamics Calibration records" +msgstr "" msgid "Action" -msgstr "Action" +msgstr "" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" msgid "Edit Flow Dynamics Calibration" -msgstr "Edit Flow Dynamics Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "" msgid "Ok" -msgstr "Ok" +msgstr "" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "" + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" -msgstr "Network lookup" +msgstr "" msgid "Address" -msgstr "Address" +msgstr "" msgid "Hostname" -msgstr "Hostname" +msgstr "" msgid "Service name" -msgstr "Service name" +msgstr "" msgid "OctoPrint version" -msgstr "OctoPrint version" +msgstr "" msgid "Searching for devices" -msgstr "Searching for devices" +msgstr "" msgid "Finished" msgstr "完了" @@ -14060,51 +16836,65 @@ msgstr "" "使用するIPアドレスを1つ選んでください。" msgid "PA Calibration" -msgstr "PA Calibration" - -msgid "DDE" -msgstr "" - -msgid "Bowden" -msgstr "Bowden" +msgstr "PAキャリブレーション" msgid "Extruder type" -msgstr "" +msgstr "押出機タイプ" + +msgid "DDE" +msgstr "ダイレクトドライブ" msgid "PA Tower" -msgstr "PA Tower" +msgstr "" msgid "PA Line" -msgstr "PA Line" +msgstr "" msgid "PA Pattern" -msgstr "PA Pattern" +msgstr "" msgid "Start PA: " -msgstr "Start PA:" +msgstr "開始PA:" msgid "End PA: " -msgstr "End PA: " +msgstr "終了PA: " msgid "PA step: " -msgstr "PA step:" +msgstr "" + +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" msgid "Print numbers" -msgstr "Print numbers" +msgstr "" + +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" -"Please input valid values:\n" -"Start PA: >= 0.0\n" -"End PA: > Start PA\n" -"PA step: >= 0.001)" msgid "Temperature calibration" -msgstr "Temperature calibration" +msgstr "" + +msgid "Filament type" +msgstr "" msgid "PLA" msgstr "PLA" @@ -14127,419 +16917,541 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filament type" - msgid "Start temp: " -msgstr "Start temp:" +msgstr "" msgid "End temp: " -msgstr "End temp:" +msgstr "" msgid "Temp step: " -msgstr "Temp step:" +msgstr "" + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" -msgstr "Max volumetric speed test" +msgstr "" msgid "Start volumetric speed: " -msgstr "Start volumetric speed:" +msgstr "" msgid "End volumetric speed: " -msgstr "End volumetric speed:" +msgstr "" -msgid "step: " -msgstr "step:" +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "VFA test" -msgstr "VFA test" +msgstr "" msgid "Start speed: " -msgstr "Start speed:" +msgstr "" msgid "End speed: " -msgstr "End speed:" +msgstr "" + +msgid "Wiki Guide: VFA" +msgstr "" msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "Start retraction length: " -msgstr "Start retraction length:" +msgstr "" msgid "End retraction length: " -msgstr "End retraction length: " +msgstr "" -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "プリンターサーバーにGコードを送信" msgid "Upload to Printer Host with the following filename:" -msgstr "Upload to Printer Host with the following filename:" +msgstr "" msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Use forward slashes ( / ) as a directory separator if needed." +msgstr "" msgid "Upload to storage" msgstr "ストレージへのアップロード" msgid "Switch to Device tab after upload." -msgstr "" +msgstr "アップロード後、デバイスタブに切り替える。" #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "Filename to upload doesn't end with \"%s\". Do you want to continue?" +msgstr "" msgid "Upload" -msgstr "Upload" +msgstr "アップロード" msgid "Print host upload queue" -msgstr "Print host upload queue" +msgstr "" msgid "ID" msgstr "ID" msgid "Progress" -msgstr "Progress" +msgstr "" msgid "Host" -msgstr "Host" +msgstr "ホスト" msgctxt "OfFile" msgid "Size" -msgstr "Size of file" +msgstr "ファイルサイズ" msgid "Filename" -msgstr "Filename" +msgstr "ファイル名" msgid "Cancel selected" -msgstr "Cancel selected" +msgstr "" msgid "Show error message" -msgstr "Show error message" +msgstr "" -msgid "Enqueued" -msgstr "Queued" +msgid "Queued" +msgstr "" msgid "Uploading" msgstr "アップロード中" -msgid "Cancelling" -msgstr "Canceling" +msgid "Canceling" +msgstr "キャンセル中" msgid "Error uploading to print host" msgstr "プリントホストへのアップロードに失敗" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + msgid "Unable to perform boolean operation on selected parts" -msgstr "Unable to perform boolean operation on selected parts" +msgstr "" msgid "Mesh Boolean" -msgstr "Mesh Boolean" +msgstr "メッシュブール" msgid "Union" -msgstr "Union" +msgstr "" msgid "Difference" -msgstr "Difference" +msgstr "" msgid "Intersection" -msgstr "Intersection" +msgstr "" msgid "Source Volume" -msgstr "Source Volume" +msgstr "" msgid "Tool Volume" -msgstr "Tool Volume" +msgstr "" msgid "Subtract from" -msgstr "Subtract from" +msgstr "" msgid "Subtract with" -msgstr "Subtract with" +msgstr "" msgid "selected" -msgstr "selected" +msgstr "" msgid "Part 1" -msgstr "Part 1" +msgstr "" msgid "Part 2" -msgstr "Part 2" +msgstr "" msgid "Delete input" -msgstr "Delete input" +msgstr "" msgid "Network Test" -msgstr "Network Test" +msgstr "" msgid "Start Test Multi-Thread" -msgstr "Start Test Multi-Thread" +msgstr "" msgid "Start Test Single-Thread" -msgstr "Start Test Single-Thread" +msgstr "" msgid "Export Log" -msgstr "Export Log" +msgstr "" msgid "Snapmaker Orca Version:" msgstr "" msgid "System Version:" -msgstr "System Version:" +msgstr "" msgid "DNS Server:" -msgstr "DNS Server:" - -msgid "Test Snapmaker Orca(GitHub)" msgstr "" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "" + +msgid "Test bing.com" +msgstr "" msgid "Test bing.com:" -msgstr "Test bing.com:" +msgstr "" msgid "Log Info" -msgstr "Log Info" +msgstr "" msgid "Select filament preset" -msgstr "Select filament preset" +msgstr "" msgid "Create Filament" -msgstr "Create Filament" +msgstr "フィラメントを作成" msgid "Create Based on Current Filament" -msgstr "Create Based on Current Filament" +msgstr "現在のフィラメントを元に作成" msgid "Copy Current Filament Preset " -msgstr "Copy Current Filament Preset " +msgstr "" msgid "Basic Information" -msgstr "Basic Information" +msgstr "" msgid "Add Filament Preset under this filament" -msgstr "Add Filament Preset under this filament" +msgstr "" msgid "We could create the filament presets for your following printer:" -msgstr "We could create the filament presets for your following printer:" +msgstr "" msgid "Select Vendor" -msgstr "Select Vendor" +msgstr "" msgid "Input Custom Vendor" -msgstr "Input Custom Vendor" +msgstr "" msgid "Can't find vendor I want" -msgstr "Can't find vendor I want" +msgstr "" msgid "Select Type" -msgstr "Select Type" +msgstr "" msgid "Select Filament Preset" -msgstr "Select Filament Preset" +msgstr "" msgid "Serial" -msgstr "Serial" +msgstr "" msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "e.g. Basic, Matte, Silk, Marble" +msgstr "" msgid "Filament Preset" -msgstr "Filament Preset" +msgstr "" msgid "Create" -msgstr "Create" +msgstr "" msgid "Vendor is not selected, please reselect vendor." -msgstr "Vendor is not selected; please reselect vendor." +msgstr "" msgid "Custom vendor is not input, please input custom vendor." -msgstr "Custom vendor missing; please input custom vendor." +msgstr "" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." msgid "Filament type is not selected, please reselect type." -msgstr "Filament type is not selected, please reselect type." +msgstr "" -msgid "Filament serial is not inputed, please input serial." -msgstr "Filament serial missing; please input serial." +msgid "Filament serial is not entered, please enter serial." +msgstr "" msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." msgstr "" -"There may be disallowed characters in the vendor or serial input of the " -"filament. Please delete and re-enter." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." -msgstr "All inputs in the custom vendor or serial are spaces. Please re-enter." +msgstr "" -msgid "The vendor can not be a number. Please re-enter." -msgstr "The vendor can not be a number; please re-enter." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "" msgid "" "You have not selected a printer or preset yet. Please select at least one." msgstr "" -"You have not selected a printer or preset yet. Please select at least one." #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"The Filament name %s you created already exists. \n" -"If you continue, the preset created will be displayed with its full name. Do " -"you want to continue?" msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "Some existing presets have failed to be created, as follows:\n" +msgstr "" msgid "" "\n" "Do you want to rewrite it?" msgstr "" -"\n" -"Do you want to rewrite it?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" -msgstr "Create Printer/Nozzle" +msgstr "" msgid "Create Printer" -msgstr "Create Printer" +msgstr "プリンターを作成" msgid "Create Nozzle for Existing Printer" -msgstr "Create Nozzle for Existing Printer" +msgstr "既存のプリンターに別サイズのノズル径を作成" msgid "Create from Template" -msgstr "Create from Template" +msgstr "" msgid "Create Based on Current Printer" -msgstr "Create Based on Current Printer" +msgstr "" msgid "Import Preset" -msgstr "Import Preset" +msgstr "" msgid "Create Type" -msgstr "Create Type" +msgstr "" -msgid "The model is not found, place reselect vendor." -msgstr "The model was not found; please reselect vendor." - -msgid "Select Model" -msgstr "Select Model" +msgid "The model was not found, please reselect vendor." +msgstr "" msgid "Select Printer" -msgstr "Select Printer" +msgstr "" + +msgid "Select Model" +msgstr "" msgid "Input Custom Model" -msgstr "Input Custom Model" +msgstr "" msgid "Can't find my printer model" -msgstr "Can't find my printer model" +msgstr "" + +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" msgid "Rectangle" -msgstr "Rectangle" +msgstr "" msgid "Printable Space" -msgstr "Printable Space" +msgstr "" msgid "Hot Bed STL" -msgstr "Hot Bed STL" - -msgid "Load stl" -msgstr "Load stl" +msgstr "" msgid "Hot Bed SVG" -msgstr "Hot Bed SVG" - -msgid "Load svg" -msgstr "Load svg" +msgstr "" msgid "Max Print Height" -msgstr "Max Print Height" +msgstr "" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." -msgstr "The file exceeds %d MB, please import again." +msgstr "" msgid "Exception in obtaining file size, please import again." -msgstr "Exception in obtaining file size, please import again." +msgstr "" -msgid "Preset path is not find, please reselect vendor." -msgstr "Preset path was not found; please reselect vendor." +msgid "Preset path was not found, please reselect vendor." +msgstr "" msgid "The printer model was not found, please reselect." -msgstr "The printer model was not found, please reselect." +msgstr "" -msgid "The nozzle diameter is not found, place reselect." -msgstr "The nozzle diameter was not found; please reselect." +msgid "The nozzle diameter was not found, please reselect." +msgstr "" -msgid "The printer preset is not found, place reselect." -msgstr "The printer preset was not found; please reselect." +msgid "The printer preset was not found, please reselect." +msgstr "" msgid "Printer Preset" -msgstr "Printer Preset" +msgstr "" msgid "Filament Preset Template" -msgstr "Filament Preset Template" +msgstr "" msgid "Deselect All" -msgstr "Deselect All" +msgstr "" msgid "Process Preset Template" -msgstr "Process Preset Template" - -msgid "Back Page 1" -msgstr "Back Page 1" +msgstr "" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"You have not yet chosen which printer preset to create based on. Please " -"choose the vendor and model of the printer" msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." msgstr "" -"You have entered a disallowed character in the printable area section on the " -"first page. Please use only numbers." - -msgid "The custom printer or model is not inputed, place input." -msgstr "The custom printer or model missing; please input." msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -14550,74 +17462,68 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" -"The printer preset you created already has a preset with the same name. Do " -"you want to overwrite it?\n" -"\tYes: Overwrite the printer preset with the same name, and filament and " -"process presets with the same preset name will be recreated \n" -"and filament and process presets without the same preset name will be " -"reserved.\n" -"\tCancel: Do not create a preset; return to the creation interface." msgid "You need to select at least one filament preset." -msgstr "You need to select at least one filament preset." +msgstr "" msgid "You need to select at least one process preset." -msgstr "You need to select at least one process preset." +msgstr "" msgid "Create filament presets failed. As follows:\n" -msgstr "Create filament presets failed. As follows:\n" +msgstr "" msgid "Create process presets failed. As follows:\n" -msgstr "Create process presets failed. As follows:\n" +msgstr "" -msgid "Vendor is not find, please reselect." -msgstr "Vendor was not found; please reselect." +msgid "Vendor was not found, please reselect." +msgstr "" msgid "Current vendor has no models, please reselect." -msgstr "Current vendor has no models, please reselect." +msgstr "" msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"You have not selected the vendor and model or input the custom vendor and " -"model." msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." msgstr "" -"There may be escape characters in the custom printer vendor or model. Please " -"delete and re-enter." msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"All inputs in the custom printer vendor or model are spaces. Please re-enter." msgid "Please check bed printable shape and origin input." -msgstr "Please check bed printable shape and origin input." +msgstr "" msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -"You have not yet selected the printer to replace the nozzle for; please " -"choose a printer." -msgid "Create Printer Successful" -msgstr "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" -msgid "Create Filament Successful" -msgstr "Filament Created Successfully" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "" + +msgid "Filament Created Successfully" +msgstr "" msgid "Printer Created" -msgstr "Printer Created" +msgstr "" msgid "Please go to printer settings to edit your presets" -msgstr "Please go to printer settings to edit your presets" +msgstr "" msgid "Filament Created" -msgstr "Filament Created" +msgstr "" msgid "" "Please go to filament setting to edit your presets if you need.\n" @@ -14625,22 +17531,18 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Please go to filament settings to edit your presets if you need to.\n" -"Please note that nozzle temperature, hot bed temperature, and maximum " -"volumetric speed each have a significant impact on printing quality. Please " -"set them carefully." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" msgid "Printer Setting" -msgstr "Printer Setting" +msgstr "" msgid "Printer config bundle(.orca_printer)" msgstr "" @@ -14649,31 +17551,31 @@ msgid "Filament bundle(.orca_filament)" msgstr "" msgid "Printer presets(.zip)" -msgstr "Printer presets(.zip)" +msgstr "" msgid "Filament presets(.zip)" -msgstr "Filament presets(.zip)" +msgstr "" msgid "Process presets(.zip)" -msgstr "Process presets(.zip)" +msgstr "" msgid "initialize fail" -msgstr "initialize fail" +msgstr "" msgid "add file fail" -msgstr "add file fail" +msgstr "" msgid "add bundle structure file fail" -msgstr "add bundle structure file fail" +msgstr "" msgid "finalize fail" -msgstr "finalize fail" +msgstr "" msgid "open zip written fail" -msgstr "open zip written fail" +msgstr "" msgid "Export successful" -msgstr "Export successful" +msgstr "" #, c-format, boost-format msgid "" @@ -14682,186 +17584,214 @@ msgid "" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" -"The '%s' folder already exists in the current directory. Do you want to " -"clear it and rebuild it?\n" -"If not, a time suffix will be added, and you can modify the name after " -"creation." + +#, c-format, boost-format +msgid "" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"User's fillment preset set. \n" -"Can be shared with others." msgid "" "Only display printer names with changes to printer, filament, and process " "presets." msgstr "" -"Only display printers with changes to printer, filament, and process presets " -"are displayed." msgid "Only display the filament names with changes to filament presets." -msgstr "Only display the filament names with changes to filament presets." +msgstr "" msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Only printer names with user printer presets will be displayed, and each " -"preset you choose will be exported as a zip." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" -"Only the filament names with user filament presets will be displayed, \n" -"and all user filament presets in each filament name you select will be " -"exported as a zip." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" -"Only printer names with changed process presets will be displayed, \n" -"and all user process presets in each printer name you select will be " -"exported as a zip." msgid "Please select at least one printer or filament." -msgstr "Please select at least one printer or filament." +msgstr "" msgid "Please select a type you want to export" -msgstr "Please select a preset type you want to export" +msgstr "" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" msgid "Edit Filament" -msgstr "Edit Filament" +msgstr "フィラメントを編集" msgid "Filament presets under this filament" -msgstr "Filament presets under this filament" +msgstr "" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Note: If the only preset under this filament is deleted, the filament will " -"be deleted after exiting the dialog." -msgid "Presets inherited by other presets can not be deleted" -msgstr "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "" msgid "Delete Preset" -msgstr "Delete Preset" +msgstr "" + +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" msgid "Are you sure to delete the selected preset?" -msgstr "Are you sure to delete the selected preset?" +msgstr "" msgid "Delete preset" -msgstr "Delete preset" +msgstr "" msgid "+ Add Preset" -msgstr "+ Add Preset" - -msgid "Delete Filament" -msgstr "Delete Filament" +msgstr "" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"All the filament presets belong to this filament would be deleted. \n" -"If you are using this filament on your printer, please reset the filament " -"information for that slot." msgid "Delete filament" -msgstr "Delete filament" +msgstr "フィラメントを削除" msgid "Add Preset" -msgstr "Add Preset" +msgstr "" msgid "Add preset for new printer" -msgstr "Add preset for new printer" +msgstr "" msgid "Copy preset from filament" -msgstr "Copy preset from filament" +msgstr "" msgid "The filament choice not find filament preset, please reselect it" -msgstr "The filament choice not find filament preset, please reselect it" +msgstr "" msgid "[Delete Required]" -msgstr "[Delete Required]" +msgstr "" msgid "Edit Preset" -msgstr "Edit Preset" +msgstr "プリセットを編集" msgid "For more information, please check out Wiki" -msgstr "For more information, please check out our Wiki" +msgstr "" msgid "Collapse" -msgstr "Collapse" +msgstr "" msgid "Daily Tips" -msgstr "Daily Tips" +msgstr "今日のヒント" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "nozzle memorized: %.1f %s" +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"Your nozzle diameter in preset is not consistent with the saved nozzle " -"diameter. Have you changed your nozzle?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" -msgstr "Need select printer" +msgstr "プリンターを選ぶ必要があります" msgid "The start, end or step is not valid value." -msgstr "The start, end or step is not valid value." +msgstr "" + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" -"Unable to calibrate: maybe because the set calibration value range is too " -"large, or the step is too small" msgid "Physical Printer" -msgstr "Physical Printer" - -msgid "Print Host upload" -msgstr "Print Host upload" - -msgid "Could not get a valid Printer Host reference" -msgstr "Could not get a valid Printer Host reference" - -msgid "Success!" -msgstr "Success!" - -msgid "Are you sure to log out?" msgstr "" -msgid "Refresh Printers" -msgstr "Refresh Printers" +msgid "Print Host upload" +msgstr "" + +msgid "Could not get a valid Printer Host reference" +msgstr "有効なプリンタホスト参照を取得できませんでした" + +msgid "Success!" +msgstr "成功!" + +msgid "Are you sure to log out?" +msgstr "本当にログアウトしますか？" msgid "View print host webui in Device tab" msgstr "" @@ -14873,106 +17803,98 @@ msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "" msgid "Open CA certificate file" -msgstr "Open CA certificate file" +msgstr "" #, c-format, boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"On this system, %s uses HTTPS certificates from the system Certificate Store " -"or Keychain." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"To use a custom CA file, please import your CA file into Certificate Store / " -"Keychain." msgid "Login/Test" msgstr "" msgid "Connection to printers connected via the print host failed." -msgstr "Connection to printers connected via the print host failed." +msgstr "" #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "Mismatched type of print host: %s" +msgstr "" -msgid "Connection to AstroBox works correctly." -msgstr "Connection to AstroBox is working correctly." +msgid "Connection to AstroBox is working correctly." +msgstr "" msgid "Could not connect to AstroBox" -msgstr "Could not connect to AstroBox" +msgstr "" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Note: AstroBox version 1.1.0 or higher is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet is working correctly." +msgid "Connection to Duet is working correctly." +msgstr "" msgid "Could not connect to Duet" -msgstr "Could not connect to Duet" +msgstr "" -msgid "Unknown error occured" -msgstr "Unknown error occured" +msgid "Unknown error occurred" +msgstr "" msgid "Wrong password" -msgstr "Wrong password" +msgstr "" msgid "Could not get resources to create a new connection" -msgstr "Could not get resources to create a new connection" +msgstr "" msgid "Upload not enabled on FlashAir card." -msgstr "Upload not enabled on FlashAir card." +msgstr "" -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "Connection to FlashAir is working correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "" msgid "Could not connect to FlashAir" -msgstr "Could not connect to FlashAir" +msgstr "" msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " -"is required." -msgid "Connection to MKS works correctly." -msgstr "Connection to MKS is working correctly." +msgid "Connection to MKS is working correctly." +msgstr "" msgid "Could not connect to MKS" -msgstr "Could not connect to MKS" +msgstr "" -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint is working correctly." +msgid "Connection to OctoPrint is working correctly." +msgstr "" msgid "Could not connect to OctoPrint" -msgstr "Could not connect to OctoPrint" +msgstr "" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version 1.1.0 or higher is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Connection to Prusa SL1 / SL1S is working correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "" msgid "Could not connect to Prusa SLA" -msgstr "Could not connect to Prusa SLA" +msgstr "" -msgid "Connection to PrusaLink works correctly." -msgstr "Connection to PrusaLink is working correctly." +msgid "Connection to PrusaLink is working correctly." +msgstr "" msgid "Could not connect to PrusaLink" -msgstr "Could not connect to PrusaLink" +msgstr "" msgid "Storages found" msgstr "ストレージが見つかりました" @@ -14993,28 +17915,26 @@ msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" "アップロードに失敗しました。%1%に適切なストレージが見つかりませんでした。" -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Prusa コネクトに接続しました。" msgid "Could not connect to Prusa Connect" msgstr "Prusaコネクトに接続できませんでした" -msgid "Connection to Repetier works correctly." -msgstr "Connection to Repetier is working correctly." +msgid "Connection to Repetier is working correctly." +msgstr "Repetierへの接続は正常に動作しています" msgid "Could not connect to Repetier" -msgstr "Could not connect to Repetier" +msgstr "Repetierに接続できませんでした。" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Note: Repetier version 0.90.0 or higher is required." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "" #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" #, boost-format msgid "" @@ -15022,9 +17942,6 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Parsing of host response failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" #, boost-format msgid "" @@ -15032,260 +17949,482 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Enumeration of host printers failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" +"0.2 mmノズルのデフォルトプロファイルと比較すると、レイヤー高さが大きくなって" +"います。そのため、レイヤーラインがわずかに見えますが、印刷時間は短縮されま" +"す。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "ベッドレベリング" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "" + +msgid "Sent Time" +msgstr "" + +msgid "There are no tasks to be sent!" +msgstr "" + +msgid "No historical tasks!" +msgstr "" + +msgid "Upgrading" +msgstr "" + +msgid "syncing" +msgstr "" + +msgid "Printing Finish" +msgstr "" + +msgid "Printing Failed" +msgstr "" + +msgid "Printing Pause" +msgstr "" + +msgid "Pending" +msgstr "" + +msgid "Sending" +msgstr "送信中" + +msgid "Sending Finish" +msgstr "" + +msgid "Sending Cancel" +msgstr "" + +msgid "Sending Failed" +msgstr "" + +msgid "Print Success" +msgstr "" + +msgid "Print Failed" +msgstr "" + +msgid "Removed" +msgstr "" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" msgstr "" @@ -15308,10 +18447,10 @@ msgstr "" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." @@ -15323,7 +18462,111 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" -msgid "User cancelled." +msgid "User canceled." +msgstr "" + +msgid "Head diameter" +msgstr "直径" + +msgid "Max angle" +msgstr "最大角度" + +msgid "Detection radius" +msgstr "検知半径" + +msgid "Remove selected points" +msgstr "選択したポイントを削除" + +msgid "Remove all" +msgstr "全て削除" + +msgid "Auto-generate points" +msgstr "自動ポイント生成" + +msgid "Add a brim ear" +msgstr "ブリムを追加" + +msgid "Delete a brim ear" +msgstr "ブリムを削除" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "断面を調整" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"警告: ブリムタイプが「ペイント」に設定されていないため、効果を持ちません。" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr "不適切なブリム" + +msgid "Brim Ears" +msgstr "ブリム" + +msgid "Please select single object." +msgstr "単一のオブジェクトを選択してください" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15353,18 +18596,25 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" +"キャリブレーション\n" +"プリンターを校正することで、素晴らしい効果が得られることをご存知ですか？オル" +"カスライサーの校正（キャリブレーション）ソリューションをご覧ください。" #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" +"補助部品冷却ファン\n" +"Snapmaker Orcaが補助部品冷却ファンをサポートしていることをご存知ですか？" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" +"空気ろ過/排気ファン\n" +"Snapmaker Orcaが空気ろ過/排気ファンに対応していることをご存知ですか？" #: resources/data/hints.ini: [hint:G-code window] msgid "" @@ -15383,7 +18633,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" #: resources/data/hints.ini: [hint:Reverse on odd] @@ -15408,9 +18658,6 @@ msgid "" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " "problems on the Windows system?" msgstr "" -"Fix Model\n" -"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " -"problems on the Windows system?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -15424,7 +18671,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "自動レイアウト\n" "自動レイアウトでプレートを最大限利用できます。" @@ -15433,7 +18680,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "自動向き調整\n" "自動向き調整で最適な向きをワンクリックで実現できます。" @@ -15580,7 +18827,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "接着力を高めるには？\n" @@ -15590,7 +18837,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "オブジェクトのパラメータを設定\n" "複数のオブジェクトを一回で設定できます" @@ -15606,8 +18853,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "サポート/オブジェクト/インフィルにフラッシュ\n" "サポート、オブジェクトやインフィルどちらにもフラッシュでき、廃料の節約や、造" @@ -15622,101 +18869,719 @@ msgstr "" "強度の向上\n" "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" -"Did you know that opening the printer door can reduce the probability of " -"extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." -msgstr "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature? There is more info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." +msgstr "" +"プリンターのドアを開けたまま印刷する必要があるのはどんなときですか？\n" +"エンクロージャーの温度が高い状態で低温のフィラメントをプリントする場合、プリ" +"ンターのドアを開けると、エクストルーダーやホットエンドが詰まる確率が下がるこ" +"とをご存知ですか？これについてはWikiに詳しい情報があります。" #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." -msgstr "" -"Avoid warping\n" -"Did you know that when printing materials that are prone to warping such as " -"ABS, appropriately increasing the heatbed temperature can reduce the " "probability of warping?" +msgstr "" +"反りを避ける\n" +"ABSのような反りやすい素材を印刷する場合、ヒートベッドの温度を適切に上げること" +"で、反りが発生する確率を下げることができることをご存知ですか？" -#~ msgid "Please input a valid value (K in 0~0.3)" -#~ msgstr "Please input a valid value (K in 0~0.3)" +#~ msgid "Adaptive layer height" +#~ msgstr "アダプティブ積層ピッチ" -#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" +#~ msgid "AMS not connected" +#~ msgstr "AMS が接続されていません" -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "Printer local connection failed; please try again." +#~ msgid "Ext Spool" +#~ msgstr "外部スプールホルダー" + +#~ msgid "Guide" +#~ msgstr "ガイド" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS キャリブレーション" + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "キャリブレーション中に問題が発生しました。クリックして解決策をご確認くださ" +#~ "い。" + +#~ msgid "Calibrate again" +#~ msgstr "再度キャリブレーションを行う" + +#~ msgid "Cancel calibration" +#~ msgstr "キャリブレーションを取消し" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "SDカードが必要です" + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "SDカードが必要です" #~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." -#~ msgstr "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will calibrate the filament before the " -#~ "print; When you start a multi color/material print, the printer will use " -#~ "the default compensation parameter for the filament during every filament " -#~ "switch which will have a good result in most cases.\n" -#~ "\n" -#~ "Please note there are a few cases that may make the calibration result " -#~ "unreliable: using a texture plate to do the calibration; using a build " -#~ "plate with poor adhesion. (please wash the build plate or apply " -#~ "gluestick!) You can find more on our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent variation in our test, " -#~ "which may cause the results to not be identical for each calibration. We " -#~ "are still investigating the root cause to further improve this " -#~ "calibration in future updates." +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "注: 同じ素材がロードされた AMS スロットのみが選択できます。" #~ msgid "" -#~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." #~ msgstr "" -#~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to override the other results?" +#~ "BambuLab純正フィラメントの場合、残量の推定を行います。造形時に、残量自動的" +#~ "に更新します。" + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "XY軸特性を測定" + +#~ msgid "Paused due to filament runout" +#~ msgstr "フィラメント切れにより一時停止" + +#~ msgid "Heating hotend" +#~ msgstr "ヘッドを加熱" + +#~ msgid "Calibrating extrusion" +#~ msgstr "押出キャリブレーション" + +#~ msgid "Printing was paused by the user" +#~ msgstr "ユーザにより一時停止" + +#~ msgid "Pause of front cover falling" +#~ msgstr "フロントカバーの脱落により一時停止" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "押出流量キャリブレーション" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "ノズル温度異常により一時停止" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "ベッド温度異常により一時停止" + +#~ msgid "Fatal" +#~ msgstr "重大的" + +#~ msgid "Serious" +#~ msgstr "重大な" + +#~ msgid "Common" +#~ msgstr "共通" + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "プレートの境界を越えるか、高さ制限を超えるオブジェクトがあります、ご確認く" +#~ "ださい" + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "下記の図面の様に、プリンターの設定→ネットワーク→アクセスコードで確認できま" +#~ "す" + +#~ msgid "Cham" +#~ msgstr "筐体" + +#~ msgid "Still unload" +#~ msgstr "アンロード" + +#~ msgid "Still load" +#~ msgstr "ロード" + +#~ msgid "Can't start this without SD card." +#~ msgstr "起動するのにSDカードが必要です。" + +#~ msgid "Update" +#~ msgstr "更新" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "感度" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "AMSにフィラメントがありません、「デバイス」ページでプリンターを選択し、AMS" +#~ "情報をロードしてください。" + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "AMSと同期する場合、現在のフィラメント設定が上書きされます。続行しますか？" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "不明なフィラメントがあります、Snapmaker Orcaを更新してください。" + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "オリジナルの SVG をローカル パスとともに 3MF ファイルに保存してもよろしい" +#~ "ですか?\n" +#~ "「いいえ」を押すと、プロジェクト内のすべての SVG は編集できなくなります。" + +#~ msgid "Private protection" +#~ msgstr "プライベートプロテクション" + +#~ msgid "General Settings" +#~ msgstr "一般設定" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "起動後「毎日のヒント」を表示" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "有効になる場合、起動時にヒントを表示されます。" + +#~ msgid "Network" +#~ msgstr "ネットワーク (&N)" + +#~ msgid "User Sync" +#~ msgstr "ユーザー同期" + +#~ msgid "Downloads" +#~ msgstr "ダウンロード" + +#~ msgid "Dark Mode" +#~ msgstr "ダークモード" + +#~ msgid "Home page and daily tips" +#~ msgstr "ホームページとヒント" + +#~ msgid "Show home page on startup" +#~ msgstr "起動時にホームページを表示" + +#~ msgid "Send print job to" +#~ msgstr "造形タスクを送信" #, c-format, boost-format #~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "フィラメント %s がAMSスロットの数を超えています。" + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "フィラメントがAMSスロットの数を超えています。" + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" #~ msgstr "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one set of results with the same name is saved. Are you sure you " -#~ "want to override the previous results?" +#~ "フィラメントとAMSスロットをマッピングしました。マッピング関係を変更できま" +#~ "す" -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "Please find the corner with the perfect degree of extrusion" +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "フィラメントとAMSのスロットのマッピング関係を指定できます。" -#~ msgid "V" -#~ msgstr "V" +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "このプリンターはAMSスロットマッピングをサポートしません" + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "SDカードが必要です" + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "SDカードが必要です" + +#~ msgid "Send to Printer SD card" +#~ msgstr "プリンターのSDカードに送信" + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "このプリンターはSDカードに送信することができません" + +#~ msgid "Auto-Calc" +#~ msgstr "自動計算" + +#~ msgid "unloaded" +#~ msgstr "アンロードしました" + +#~ msgid "loaded" +#~ msgstr "ロード済み" + +#~ msgid "Filament #" +#~ msgstr "フィラメント#" + +#~ msgid "From" +#~ msgstr "From" + +#~ msgid "To" +#~ msgstr "→" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ "他のオブジェクトと近すぎます。オブジェクトと衝突の可能性があります。" + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "温度差が大きいフィラメントを一緒に造形することができません。ノズル詰まりや" +#~ "損傷する可能性があります" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + マウスホイール" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + スクロール" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + マウスの左ボタン" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Left mouse button:" +#~ msgstr "マウス左ボタン" + +#~ msgid "Right mouse button:" +#~ msgstr "マウス右ボタン" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + マウス左ボタン" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + マウス右ボタン" + +#~ msgid "Recent projects" +#~ msgstr "最近のプロジェクト" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+↑↓←→" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+マウス左ボタン" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+マウス左ボタン" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+↑↓←→" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+マウス左ボタン" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+マウス左ボタン" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift + マウス左ボタン" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift + ↑↓←→" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+マウスホイール" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+マウスホイール" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+マウスホイール" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+マウスホイール" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift + マウスホイール" + +#~ msgid "Set Position" +#~ msgstr "位置を設定" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "右クリックしオブジェクトを修復します" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "オブジェクトは一つだけのパーツが入っており、分割できません。" + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "配色スキーム" + +#~ msgid "Percent" +#~ msgstr "％" + +#~ msgid "Used filament" +#~ msgstr "フィラメント使用量" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SDカード" + +#~ msgid "100%" +#~ msgstr "100％" + +#~ msgid "No SD Card" +#~ msgstr "SDカードなし" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SDカードに異常があります。" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "デバイス %s(%s) の取出しが失敗しました" + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "無効な数字" + +#~ msgid "Ramming settings" +#~ msgstr "ラミング設定" + +#~ msgid "Profile dependencies" +#~ msgstr "プロファイルの依存関係" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "構成パッケージは、このバージョンのSnapmaker Orcaに適用できません" + +#~ msgid "Total ramming time" +#~ msgstr "トータルラミング時間" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "合計ラミング容積" + +#~ msgid "Ramming line width" +#~ msgstr "ラミング線幅" + +#~ msgid "Ramming line spacing" +#~ msgstr "ラミング線間距離" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Compatible machine" +#~ msgstr "対応機種" + +#~ msgid "Compatible machine condition" +#~ msgstr "対応機種条件" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "互換性のあるプロセスプロファイル条件" + +#~ msgid "Default filament color" +#~ msgstr "フィラメントのデフォルト色" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "最大積層ピッチ：この値は「アダプティブ積層ピッチ」が有効時に積層ピッチの最" +#~ "大値です" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "最小積層ピッチ：この値は「アダプティブ積層ピッチ」が有効時に積層ピッチの最" +#~ "小値です" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "ノズルが長い距離で移動する時に、リトラクションの量です。値が0の場合、リト" +#~ "ラクションが無効になります。" + +#~ msgid "Speed of retractions." +#~ msgstr "リトラクションの速度です。" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "リトラクション後フィラメントをロードする時の速度です、値が0の場合、リトラ" +#~ "クションの速度と同じくなります。" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "接触面を造形時に線の距離です。0はソリッド接触面です。" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "小部分の厚さ下限。モデルに厚さがこの値以下になる部分を造形しません。" + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Delete Filament" +#~ msgstr "フィラメントを削除" + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "0.8mmノズルのデフォルト・プロファイルと比較すると、レイヤーの高さが大きく" +#~ "なっています。その結果、レイヤーラインが非常に目立ち、印刷品質が大幅に低下" +#~ "しますが、場合によっては印刷時間が短縮されます。" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "ブリムタイプを「ペイント」に設定" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "ツリースリムはサポートの強度を弱めてフィラメントの消費量を減らします。" + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "「ツリーストラング」と「ツリーハイブリッド」の場合、下記の設定をお勧めしま" +#~ "す：接触層数を２、トップ面とのZ間隔を0.1mm。" + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "二重ウォール枝径" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "この直径の円の面積よりも大きな面積を持つ枝は、安定性向上のためために二重" +#~ "ウォールでプリントされます。 二重ウォールにしないときは、この値をゼロに設" +#~ "定します。" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "サポート: 積層%dのツールパスを生成" + +#~ msgid "Support: detect overhangs" +#~ msgstr "サポート: オーバーハングを検出" + +#~ msgid "Support: propagate branches" +#~ msgstr "サポート: ブランチを生成" + +#~ msgid "Support: draw polygons" +#~ msgstr "サポート: ポリゴンを作成" + +#~ msgid "Support: generate toolpath" +#~ msgstr "サポート: ツールパスを生成" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "サポート: 積層%dのポリゴンを生成" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "サポート: 積層%dの穴を修正" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "サポート: 積層%dのブランチを生成" + +#~ msgid "Current Cabin humidity" +#~ msgstr "現在の庫内湿度" + +#~ msgid "Stopped." +#~ msgstr "中止しました" + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "接続に失敗しました (%d)" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "初期化に失敗しました（デバイス接続の準備ができていません)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "初期化失敗 (%s)" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN接続失敗 (造形ファイル送信)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "１Snapmaker Orcaとプリンターが同一のLANに繋いでいること確認してください。" + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "２下記IPアドレスやアクセスコードが一致していない場合修正してください。" + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "ステップ3: パケットロスとレイテンシを確認するために、IPアドレスに対して" +#~ "pingを実行します。" + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "ｵｰﾊﾞｰﾊﾝｸﾞとﾌﾞﾘｯｼﾞの冷却" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "この設定により、パーツ冷却ファンの回転速度を最適化を行います。オーバーハン" +#~ "グやブリッジの冷却に有効的です。" + +#~ msgid "Fan speed for overhang" +#~ msgstr "オーバーハングの回転速度" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "大きなオーバーハングやブリッジを造形する時にファンの回転速度。仕上がりが向" +#~ "上させる効果があります。" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "オーバーハングの冷却閾値" + +#~ msgid "Thick bridges" +#~ msgstr "厚いブリッジ" + +#~ msgid "" +#~ "normal(auto) and tree(auto) are used to generate support automatically. " +#~ "If normal(manual) or tree(manual) is selected, only support enforcers are " +#~ "generated." +#~ msgstr "通常 (自動) と ツリー (自動) では自動でサポートを作成します。" + +#~ msgid "Unselect" +#~ msgstr "選択解除" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "スケール" + +#~ msgid "Z-hop when retract" +#~ msgstr "リトラクト時にZ方向調整" + +#~ msgid "Limited" +#~ msgstr "限定" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "この値を少し (例えば 0.9) 小さくし、ブリッジ用に押出し量を減らし、たるみを" +#~ "防ぎます。" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "ブリッジを造形する時に速度です。" + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "フィラメントを入れ替える時に、フィラメントをロードする時間です、統計目的に" +#~ "使用されています。" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "フィラメントを入れ替える時に、フィラメントをアンロードする時間です、統計目" +#~ "的に使用されています。" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "ツールの変更中（Tコードの実行時）にプリンターファームウェア（またはMulti " +#~ "Material Unit 2.0）が新しいフィラメントをロードする時間。 この時間は、G" +#~ "コード時間推定プログラムによって合計プリント時間に追加されます。" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "ツールチェンジ中（Tコードの実行時）にプリンターファームウェア（または" +#~ "Multi Material Unit 2.0）がフィラメントをアンロードする時間。 この時間は、" +#~ "Gコード時間予測プログラムによって合計プリント予測時間に追加されます。" + +#~ msgid "Wipe tower extruder" +#~ msgstr "ワイプタワーエクストルーダー" + +#~ msgid "Please input a valid value (K in 0~0.3)" +#~ msgstr "有効な値を入力してください (K in 0~0.3)" + +#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" +#~ msgstr "有効な値を入力してください (K in 0~0.3, N in 0.6~2.0)" #~ msgid "Export &Configs" #~ msgstr "構成データ" @@ -15739,28 +19604,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "アンロード" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "AMS スロットを選択し、[ロード] または [アンロード] をタップすると、フィラ" -#~ "メントが自動的にロードまたはアンロードされます。" - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "メインボード" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - #~ msgid "active" #~ msgstr "アクティブ" @@ -15797,7 +19643,7 @@ msgstr "" #~ "す。" #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "注意：造形時に入れる場合、造形が完成したから読込みます。" @@ -15811,8 +19657,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "初期化失敗 (カメラ無し)" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "プリンターがダウンロード中、完了までお待ちください" #~ msgid "Initialize failed (Not accessible in LAN-only mode)!" @@ -15829,23 +19674,13 @@ msgstr "" #~ msgid "Load failed [%d]!" #~ msgstr "ロード失敗 [%d]!" -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - #, c-format, boost-format #~ msgid "Load failed [%d]" -#~ msgstr "Load failed [%d]" - -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Failed to fetch model infomation from printer." - -#~ msgid "Failed to parse model infomations." -#~ msgstr "Failed to parse model infomation" +#~ msgstr "ロード失敗 [%d]" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -15853,7 +19688,7 @@ msgstr "" #~ "それらの変更を選択したプリセットに引き継ぎますか？" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "プリセットに変更がありあす。これらの変更を流用しますか？" @@ -15866,14 +19701,9 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "構成パッケージがアップデートされました" -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "構成を読込めませんでした" -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "3mfは古いバージョンのSnapmaker Orcaで作成されています、ジオメトリーデータのみ" -#~ "読込みます。" - #~ msgid "Movement:" #~ msgstr "移動" @@ -15883,33 +19713,8 @@ msgstr "" #~ msgid "Auto Segment" #~ msgstr "自動分割" -#~ msgid "Depth ratio" -#~ msgstr "Depth ratio" - -#~ msgid "Prizm" -#~ msgstr "Prizm" - -#~ msgid "connector is out of cut contour" -#~ msgstr "connector is out of cut contour" - -#~ msgid "connectors are out of cut contour" -#~ msgstr "connectors are out of cut contour" - -#~ msgid "connector is out of object" -#~ msgstr "connector is out of object" - -#~ msgid "connectors is out of object" -#~ msgstr "Connectors must be on object surface." - -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "Invalid state. \n" -#~ "No one part is selected to keep after cut" - #~ msgid "Edit Text" -#~ msgstr "Edit Text" +#~ msgstr "テキストを編集" #~ msgid "Error! Unable to create thread!" #~ msgstr "エラー：スレッドを作成できません" @@ -15917,29 +19722,23 @@ msgstr "" #~ msgid "Exception" #~ msgstr "異常" -#~ msgid "Choose SLA archive:" -#~ msgstr "Choose SLA archive:" - -#~ msgid "Import file" -#~ msgstr "Import file" - #~ msgid "Import model and profile" -#~ msgstr "Import model and profile" +#~ msgstr "モデルとプロファイルを取り込む" #~ msgid "Import profile only" -#~ msgstr "Import profile only" +#~ msgstr "プロファイルのみ取り込む" #~ msgid "Import model only" -#~ msgstr "Import model only" +#~ msgstr "モデルのみ取り込む" #~ msgid "Accurate" -#~ msgstr "Accurate" +#~ msgstr "緻密" #~ msgid "Balanced" -#~ msgstr "Balanced" +#~ msgstr "バランス" #~ msgid "Quick" -#~ msgstr "Quick" +#~ msgstr "高速" #~ msgid "" #~ "Discribe how long the nozzle will move along the last path when retracting" @@ -15956,7 +19755,7 @@ msgstr "" #~ "右クリックし、メニューで選択できます。" #~ msgid "Filling bed " -#~ msgstr "Filling bed" +#~ msgstr "ベッドをこのオブジェクトで満たす" #, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." @@ -15971,7 +19770,7 @@ msgstr "" #~ "はい - 直線パターンに切り替えます\n" #~ "いいえ - 充填密度をリセットします" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "" #~ "フィラメントをロードする前に、ノズル温度を170℃以上に加熱してください" @@ -15988,10 +19787,7 @@ msgstr "" #, c-format, boost-format #~ msgid " doesn't work at 100%% density " -#~ msgstr " doesn't work at 100%% density " - -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" +#~ msgstr "100%% の密度では使用できません" #~ msgid "Tool-Lay on Face" #~ msgstr "ツール 底面選択" @@ -15999,9 +19795,6 @@ msgstr "" #~ msgid "Export as STL" #~ msgstr "STL形式でエクスポート" -#~ msgid "Check cloud service status" -#~ msgstr "Check cloud service status" - #~ msgid "Please input a valid value (K in 0~0.5)" #~ msgstr "有効な値を入力してください (0 ~ 0.5)" @@ -16011,7 +19804,7 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "全てのオブジェクト (STL)" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "" #~ "この3mfファイルと互換性がありません、ジオメトリーデータのみ読込みます。" @@ -16021,10 +19814,6 @@ msgstr "" #~ msgid "Add/Remove printers" #~ msgstr "プリンターを追加/削除" -#, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s is not supported by the AMS." - #~ msgid "Don't remind me of this version again" #~ msgstr "今後このバージョンの通知をしません" @@ -16052,124 +19841,6 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "内壁-外壁-内壁/インフィル" -#~ msgid "Export 3MF" -#~ msgstr "3mf をエクスポート" - -#~ msgid "Export project as 3MF." -#~ msgstr "プロジェクトを3MF式で出力" - -#~ msgid "Export slicing data" -#~ msgstr "スライスデータをエクスポート" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "スライスデータをエクスポート" - -#~ msgid "Load slicing data" -#~ msgstr "スライスデータを読込み" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "スライスデータを読込み" - -#~ msgid "Slice" -#~ msgstr "スライス" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "プレートをスライス: 0: 全て, i:プレートi, その他: 無効" - -#~ msgid "Show command help." -#~ msgstr "ヘルプを表示します。" - -#~ msgid "UpToDate" -#~ msgstr "最新の状態です。" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "3mfの構成値を更新" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max triangle count per plate for slicing" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "max slicing time per plate in seconds" - -#~ msgid "Normative check" -#~ msgstr "Normative check" - -#~ msgid "Check the normative items." -#~ msgstr "Check the normative items." - -#~ msgid "Output Model Info" -#~ msgstr "出力モデル情報" - -#~ msgid "Output the model's information." -#~ msgstr "出力するモデル情報です。" - -#~ msgid "Export Settings" -#~ msgstr "エクスポート設定" - -#~ msgid "Export settings to a file." -#~ msgstr "設定をファイルにエクスポートします。" - -#~ msgid "Send progress to pipe" -#~ msgstr "パイプに進捗を送信" - -#~ msgid "Send progress to pipe." -#~ msgstr "パイプに進捗を送信" - -#~ msgid "Arrange Options" -#~ msgstr "レイアウト設定" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "レイアウト設定: 0: 無効　1: 有効　その他: 自動" - -#~ msgid "Convert Unit" -#~ msgstr "単位変換" - -#~ msgid "Convert the units of model" -#~ msgstr "モデルの単位を変換" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "指定した比率で伸縮する" - -#~ msgid "Load General Settings" -#~ msgstr "一般設定を読込む" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "指定ファイルから設定値を読込む" - -#~ msgid "Load Filament Settings" -#~ msgstr "フィラメント設定を読込む" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "指定したファイルリストからフィラメント設定を読込む" - -#~ msgid "Skip Objects" -#~ msgstr "Skip Objects" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Skip some objects in this print" - -#~ msgid "Output directory" -#~ msgstr "出力先フォルダ" - -#~ msgid "Output directory for the exported files." -#~ msgstr "エクスポートの出力先フォルダです。" - -#~ msgid "Debug level" -#~ msgstr "デバッグ レベル" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" -#~ "4:debug、5:trace。\n" - #~ msgid "" #~ "3D Scene Operations\n" #~ "Did you know how to control view and object/part selection with mouse and " @@ -16186,14 +19857,8 @@ msgstr "" #~ "モデル修復\n" #~ "破損したモデルでも修復してスライスできます。" -#~ msgid "Embeded" -#~ msgstr "Embedded" - #~ msgid "Online Models" -#~ msgstr "Online Models" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Show online staff-picked models on the home page" +#~ msgstr "オンラインモデル" #~ msgid "The minimum printing speed when slow down for cooling" #~ msgstr "冷却のために速度を落とした時の最低造形速度。" @@ -16228,7 +19893,7 @@ msgstr "" #~ msgstr "底面との隙間があります、レイヤーを入れ替えました" #~ msgid "The model has too many empty layers." -#~ msgstr "このモデルには空層があります。" +#~ msgstr "このモデルには空の層があります。" #~ msgid "Cali" #~ msgstr "標定" @@ -16236,14 +19901,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "押出のキャリブレーション" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Push new filament into the extruder" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "ベッド温度が1層目温度より %d ℃以上低いです。造形中プレートより離脱する可能" #~ "性があります" @@ -16260,20 +19922,11 @@ msgstr "" #~ "ドアを開いて換気を良くするか、ベッド温度を下げてください。" #~ msgid "Total Time Estimation" -#~ msgstr "Total Time Estimation" +#~ msgstr "予想合計時間" #~ msgid "Resonance frequency identification" #~ msgstr "共振特性測定" -#~ msgid "Immediately score" -#~ msgstr "Immediately score" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Please give a score for your favorite Bambu Market model." - -#~ msgid "Score" -#~ msgstr "Score" - #~ msgid "Bambu High Temperature Plate" #~ msgstr "Bambu 高温プレート" @@ -16287,8 +19940,8 @@ msgstr "" #~ msgstr "高温プレート" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "高温プレートが装着時のベッド温度です。値が0の場合、フィラメントが高温プ" #~ "レートに使用できない意味です。" @@ -16320,4 +19973,4 @@ msgstr "" #~ "ると、造形失敗する可能性があります。" #~ msgid "Orient the model" -#~ msgstr "モデルの向きを調整" +#~ msgstr "モデルの向きを調整" \ No newline at end of file diff --git a/localization/i18n/ko/Snapmaker_Orca_ko.po b/localization/i18n/ko/Snapmaker_Orca_ko.po index b972afc6d4..f81cb23760 100644 --- a/localization/i18n/ko/Snapmaker_Orca_ko.po +++ b/localization/i18n/ko/Snapmaker_Orca_ko.po @@ -7,23 +7,132 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-07-30 10:20+0900\n" -"PO-Revision-Date: 2024-05-31 23:33+0900\n" -"Last-Translator: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github." -"com>\n" -"Language-Team: crwusiz@gmail.com\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-06-02 17:12+0900\n" +"Last-Translator: crwusiz \n" +"Language-Team: \n" "Language: ko_KR\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 3.5\n" +"X-Generator: Poedit 3.6\n" -msgid "Supports Painting" -msgstr "지지대 칠하기" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + 마우스 휠" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU는 AMS에서 지원되지 않습니다." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"습한 PVA는 유연해져서 AMS 내부에 달라붙게 됩니다. 사용하기 전에 건조시키십시" +"오." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"CF/GF 필라멘트는 단단하고 부서지기 쉽습니다. AMS에 걸리거나 부러지기 쉬우므" +"로 주의하여 사용하세요." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "현재 AMS 습도" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "온도" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "대기 중" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "시리얼:" + +msgid "Version:" +msgstr "버전:" + +msgid "Latest version" +msgstr "최신 버전" + +msgid "Support Painting" +msgstr "서포트 칠하기" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "마우스 휠" msgid "Section view" msgstr "단면도" @@ -31,9 +140,6 @@ msgstr "단면도" msgid "Reset direction" msgstr "방향 초기화" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + 마우스 휠" - msgid "Pen size" msgstr "펜 크기" @@ -41,16 +147,13 @@ msgid "Left mouse button" msgstr "마우스 왼쪽 버튼" msgid "Enforce supports" -msgstr "지지대 강제" +msgstr "서포트 강제" msgid "Right mouse button" msgstr "마우스 오른쪽 버튼" msgid "Block supports" -msgstr "지지대 차단" - -msgid "Shift + Left mouse button" -msgstr "Shift + 마우스 왼쪽 버튼" +msgstr "서포트 차단" msgid "Erase" msgstr "지우기" @@ -59,7 +162,7 @@ msgid "Erase all painting" msgstr "모든 페인팅 삭제" msgid "Highlight overhang areas" -msgstr "돌출부 영역 강조" +msgstr "오버행 영역 강조" msgid "Gap fill" msgstr "간격 채우기" @@ -77,7 +180,10 @@ msgid "Smart fill angle" msgstr "스마트 채우기 각도" msgid "On overhangs only" -msgstr "돌출부에만 칠하기" +msgstr "오버행에만 칠하기" + +msgid "Auto support threshold angle: " +msgstr "자동 서포트 임계값 각도: " msgid "Circle" msgstr "원" @@ -96,26 +202,23 @@ msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "\"%1%\"에서 선택한 영역에만 칠하기 허용" msgid "Highlight faces according to overhang angle." -msgstr "돌출부 각도에 따라 면을 강조 표시합니다." - -msgid "Auto support threshold angle: " -msgstr "자동 지지대 임계값 각도: " +msgstr "오버행 각도에 따라 면을 강조 표시합니다." msgid "No auto support" -msgstr "자동 지지대 비활성" +msgstr "자동 서포트 비활성" msgid "Support Generated" -msgstr "지지대 생성됨" +msgstr "서포트 생성됨" msgid "Gizmo-Place on Face" -msgstr "Gizmo-면에 배치" +msgstr "변형도구 - 면에 배치" msgid "Lay on face" msgstr "바닥면 선택" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "필라멘트 수가 페인팅 도구가 지원하는 최대 수를 초과합니다. 첫 번째 %1% 필라멘" @@ -157,12 +260,21 @@ msgstr "버킷 채우기" msgid "Height range" msgstr "높이 범위" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "와이어프레임 전환" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "취소" + msgid "Shortcut Key " msgstr "단축키 " @@ -185,17 +297,41 @@ msgstr "칠한 색 제거" msgid "Painted using: Filament %1%" msgstr "칠하기에 사용한 필라멘트 %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "붓 크기" + +msgid "Brush shape" +msgstr "붓 모양" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "이동" +msgid "Please select at least one object." +msgstr "객체를 하나 이상 선택하세요." + msgid "Gizmo-Move" -msgstr "Gizmo-이동" +msgstr "변형도구 - 이동" msgid "Rotate" msgstr "회전" msgid "Gizmo-Rotate" -msgstr "Gizmo-회전" +msgstr "변형도구 - 회전" msgid "Optimize orientation" msgstr "방향 최적화" @@ -207,7 +343,7 @@ msgid "Scale" msgstr "배율" msgid "Gizmo-Scale" -msgstr "Gizmo-배율" +msgstr "변형도구 - 배율" msgid "Error: Please close all toolbar menus first" msgstr "오류: 먼저 모든 도구 모음 메뉴를 닫으십시오." @@ -216,22 +352,28 @@ msgid "in" msgstr "인치" msgid "mm" -msgstr "밀리미터" +msgstr "mm" + +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" msgid "Position" msgstr "위치" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "회전" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "배율비" msgid "Object Operations" -msgstr "개체 작업" +msgstr "객체 작업" msgid "Volume Operations" msgstr "용량 작업" @@ -242,9 +384,6 @@ msgstr "번역" msgid "Group Operations" msgstr "그룹 작업" -msgid "Set Position" -msgstr "위치 설정" - msgid "Set Orientation" msgstr "방향 설정" @@ -257,22 +396,31 @@ msgstr "위치 초기화" msgid "Reset Rotation" msgstr "회전 초기화" +msgid "Object coordinates" +msgstr "객체 좌표" + msgid "World coordinates" msgstr "영역 좌표" -msgid "Object coordinates" -msgstr "개체 좌표" +msgid "Translate(Relative)" +msgstr "" -msgid "°" -msgstr "°" +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "크기" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "균일 배율" @@ -280,7 +428,7 @@ msgid "Planar" msgstr "평면" msgid "Dovetail" -msgstr "도브테이" +msgstr "도브테일" msgid "Auto" msgstr "자동" @@ -292,7 +440,7 @@ msgid "Plug" msgstr "플러그" msgid "Dowel" -msgstr "맞춤핀" +msgstr "도웰" msgid "Snap" msgstr "스냅" @@ -301,7 +449,7 @@ msgid "Prism" msgstr "프리즘" msgid "Frustum" -msgstr "원뿔" +msgstr "원뿔대" msgid "Square" msgstr "사각형" @@ -336,6 +484,12 @@ msgstr "형태" msgid "Depth" msgstr "깊이" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "회전" + msgid "Groove" msgstr "그루브" @@ -352,7 +506,7 @@ msgid "Part" msgstr "부품" msgid "Object" -msgstr "개체" +msgstr "객체" msgid "" "Click to flip the cut plane\n" @@ -436,9 +590,6 @@ msgstr "반경과 관련된 공간 비율" msgid "Confirm connectors" msgstr "커넥터 승인" -msgid "Cancel" -msgstr "취소" - msgid "Build Volume" msgstr "빌드 볼륨" @@ -514,10 +665,10 @@ msgid "Some connectors are overlapped" msgstr "일부 커넥터가 겹칩니다" msgid "Select at least one object to keep after cutting." -msgstr "잘라낸 후 보관할 개체를 하나 이상 선택합니다." +msgstr "잘라낸 후 보관할 객체를 하나 이상 선택합니다." msgid "Cut plane is placed out of object" -msgstr "절단면이 개체 밖으로 배치됨" +msgstr "절단면이 객체 밖으로 배치됨" msgid "Cut plane with groove is invalid" msgstr "홈이 있는 절단면은 유효하지 않습니다" @@ -533,7 +684,7 @@ msgstr "" "절단 도구로 인해 메인폴드가 아닌 가장자리가 발생했는데 지금 수정하시겠습니까?" msgid "Repairing model object" -msgstr "모델 개체 수리 중" +msgstr "모델 객체 수리 중" msgid "Cut by line" msgstr "라인별로 자르기" @@ -542,13 +693,13 @@ msgid "Delete connector" msgstr "커넥터 삭제" msgid "Mesh name" -msgstr "메쉬 이름" +msgstr "메시 이름" msgid "Detail level" msgstr "세부 레벨" msgid "Decimate ratio" -msgstr "데시메이트 비율" +msgstr "감소 비율" #, boost-format msgid "" @@ -592,14 +743,10 @@ msgstr "%d 삼각형" msgid "Show wireframe" msgstr "와이어프레임 보기" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "미리 보기 진행 시 적용할 수 없습니다." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "작업이 이미 취소중입니다. 몇 초만 기다려 주십시오." msgid "Face recognition" @@ -608,32 +755,26 @@ msgstr "바닥면 인식" msgid "Perform Recognition" msgstr "인식 수행" -msgid "Brush size" -msgstr "붓 크기" - -msgid "Brush shape" -msgstr "붓 모양" - msgid "Enforce seam" -msgstr "솔기 적용" +msgstr "재봉선 적용" msgid "Block seam" -msgstr "솔기 차단" +msgstr "재봉선 차단" msgid "Seam painting" -msgstr "솔기 칠하기" +msgstr "재봉선 칠하기" msgid "Remove selection" msgstr "선택 삭제" msgid "Entering Seam painting" -msgstr "솔기 칠하기 입력" +msgstr "재봉선 칠하기 입력" msgid "Leaving Seam painting" -msgstr "솔기 칠하기 떠나기" +msgstr "재봉선 칠하기 떠나기" msgid "Paint-on seam editing" -msgstr "페인트칠 솔기 편집" +msgstr "페인트칠 재봉선 편집" #. TRN - Input label. Be short as possible #. Select look of letter shape @@ -650,7 +791,7 @@ msgid "Angle" msgstr "각도" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "내장\n" @@ -665,8 +806,8 @@ msgstr "표면" msgid "Horizontal text" msgstr "가로 텍스트" -msgid "Shift + Mouse move up or down" -msgstr "Shift + 마우스 위 or 아래" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "텍스트 회전" @@ -689,10 +830,10 @@ msgid "Embossed text" msgstr "텍스트 양각" msgid "Enter emboss gizmo" -msgstr "양각 기즈모 입력" +msgstr "변형도구 - 양각 입력" msgid "Leave emboss gizmo" -msgstr "양각 기즈모 남기기" +msgstr "변형도구 - 양각 나가기" msgid "Embossing actions" msgstr "양각 작업" @@ -759,7 +900,7 @@ msgstr "글꼴 변경 사항을 되돌립니다." #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "글꼴 \"%1%\"을(를) 선택할 수 없습니다." +msgstr "글꼴 \"%1%\"를 선택할 수 없습니다." msgid "Operation" msgstr "작업" @@ -768,10 +909,10 @@ msgid "Join" msgstr "접합부" msgid "Click to change text into object part." -msgstr "텍스트를 개체 부분으로 변경하려면 클릭하세요." +msgstr "텍스트를 객체 부분으로 변경하려면 클릭하세요." msgid "You can't change a type of the last solid part of the object." -msgstr "개체의 마지막 솔리드 부분 유형은 변경할 수 없습니다." +msgstr "객체의 마지막 솔리드 부분 유형은 변경할 수 없습니다." msgctxt "EmbossOperation" msgid "Cut" @@ -790,7 +931,7 @@ msgid "Change Text Type" msgstr "텍스트 유형 변경" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "양각 텍스트의 스타일 이름 바꾸기(%1%)" msgid "Name can't be empty." @@ -872,7 +1013,7 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" -"스타일을 \"%1%\"(으)로 변경하면 현재 스타일 수정 사항이 삭제됩니다.\n" +"스타일을 \"%1%\"으로 변경하면 현재 스타일 수정 사항이 삭제됩니다.\n" "\n" "그래도 계속하시겠습니까?" @@ -881,7 +1022,7 @@ msgstr "유효한 스타일이 아닙니다." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "스타일 \"%1%\"은(는) 사용할 수 없으며 목록에서 제거됩니다." +msgstr "스타일 \"%1%\"는 사용할 수 없으며 목록에서 제거됩니다." msgid "Unset italic" msgstr "이탤릭체 설정해제" @@ -984,14 +1125,14 @@ msgstr "텍스트 중심에서 모델 표면까지의 거리입니다." msgid "Undo rotation" msgstr "회전 실행 취소" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "텍스트를 시계 방향으로 회전합니다." msgid "Unlock the text's rotation when moving text along the object's surface." -msgstr "개체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠금 해제합니다." +msgstr "객체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠금 해제합니다." msgid "Lock the text's rotation when moving text along the object's surface." -msgstr "개체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠급니다." +msgstr "객체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠급니다." msgid "Select from True Type Collection." msgstr "트루타입 컬렉션에서 선택하세요." @@ -1002,10 +1143,14 @@ msgstr "카메라를 향하도록 텍스트 설정" msgid "Orient the text towards the camera." msgstr "텍스트 방향을 카메라 쪽으로 향하게 합니다." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "글꼴 “%1%”를 사용할 수 없습니다. 다른 글꼴을 선택하세요." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "정확히 동일한 글꼴(\"%1%\")을 로드할 수 없습니다. 응용 프로그램이 유사한 항목" "(\"%2%\")을 선택했습니다. 텍스트 편집을 활성화하려면 글꼴을 지정해야 합니다." @@ -1086,10 +1231,10 @@ msgid "SVG move" msgstr "SVG 이동" msgid "Enter SVG gizmo" -msgstr "SVG 기즈모 입력" +msgstr "변형도구 - SVG 입력" msgid "Leave SVG gizmo" -msgstr "SVG 기즈모 나가기" +msgstr "변형도구 - SVG 나가기" msgid "SVG actions" msgstr "SVG 작업" @@ -1112,7 +1257,7 @@ msgid "Linear gradient" msgstr "선형 그래디언트" msgid "Radial gradient" -msgstr "방사형 그래디언트" +msgstr "방사형 그라데이션" msgid "Open filled path" msgstr "채워진 경로 열기" @@ -1120,11 +1265,11 @@ msgstr "채워진 경로 열기" msgid "Undefined stroke type" msgstr "정의되지 않은 스트로크 유형" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "자체 교차 및 여러 지점에서는 경로를 복구할 수 없습니다." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "최종 모양에는 자체 교차점이나 동일한 좌표를 가진 여러 점이 포함되어 있습니다." @@ -1133,7 +1278,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "모양이 보이지 않음(%1%)으로 표시되었습니다." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "도형 채우기(%1%)에는 지원되지 않는 %2%가 포함되어 있습니다." @@ -1163,7 +1308,8 @@ msgstr "디스크에서 SVG 파일을 다시 로드합니다." msgid "Change file" msgstr "파일 변경" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "다른 .svg 파일로 변경" msgid "Forget the file path" @@ -1190,7 +1336,8 @@ msgstr "다른 이름으로 저장" msgid "Save SVG file" msgstr "SVG 파일 저장" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "'.svg' 파일로 저장" msgid "Size in emboss direction." @@ -1199,7 +1346,7 @@ msgstr "양각 방향의 크기입니다." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" -msgstr "규모도 곡선 샘플의 양을 변경합니다(%1%)." +msgstr "규모도 곡선 샘플의 양을 변경합니다 (%1%)" msgid "Width of SVG." msgstr "SVG의 너비." @@ -1248,7 +1395,7 @@ msgstr "파일이 존재하지 않습니다(%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" -msgstr "파일 이름은 \".svg\"로 끝나야 하지만 %1%을(를) 선택했습니다" +msgstr "파일 이름은 \".svg\"로 끝나야 하지만 %1%를 선택했습니다" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." @@ -1258,6 +1405,9 @@ msgstr "나노 SVG 파서는 파일(%1%)에서 로드할 수 없습니다." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG 파일에는 양각할 단일 경로(%1%)가 포함되어 있지 않습니다." +msgid "No feature" +msgstr "기능 없음" + msgid "Vertex" msgstr "꼭지점" @@ -1282,9 +1432,6 @@ msgstr "가장자리 중심" msgid "Center of circle" msgstr "원의 중심" -msgid "ShiftLeft mouse button" -msgstr "Shift + 왼쪽 마우스 버튼" - msgid "Select feature" msgstr "기능 선택" @@ -1300,18 +1447,22 @@ msgstr "다시 선택" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "선택 취소" +msgid "Cancel a feature until exit" +msgstr "종료할 때까지 기능 취소" msgid "Measure" msgstr "측정" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "폭발 비율 = 1인지 확인하고 하나 이상의 객채를 선택하십시오" + msgid "Edit to scale" msgstr "규모에 맞게 편집" msgctxt "Verb" -msgid "Scale" -msgstr "규모" +msgid "Scale all" +msgstr "모두 확장" msgid "None" msgstr "없음" @@ -1325,6 +1476,48 @@ msgstr "길이" msgid "Selection" msgstr "선택" +msgid " (Moving)" +msgstr " (움직이는)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"객체에서 2개의 면을 선택하고\n" +" 객체를 함께 조립합니다." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"객체 위의 점이나 원 2개를 선택하고\n" +" 그들 사이의 거리를 지정하십시오." + +msgid "Face" +msgstr "얼굴" + +msgid " (Fixed)" +msgstr " (고정된)" + +msgid "Point" +msgstr "가리키다" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"기능 1이 재설정되었습니다.\n" +"기능 2는 기능 1이 되었습니다" + +msgid "Warning: please select Plane's feature." +msgstr "경고: 평면의 기능을 선택하세요." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "경고: 점 또는 원의 특징을 선택하십시오." + +msgid "Warning: please select two different meshes." +msgstr "경고: 서로 다른 두 개의 메시를 선택하십시오." + msgid "Copy to clipboard" msgstr "클립보드로 복사" @@ -1340,8 +1533,26 @@ msgstr "직접적인 거리" msgid "Distance XYZ" msgstr "XYZ 거리" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "평행한" + +msgid "Center coincidence" +msgstr "중심 일치" + +msgid "Feature 1" +msgstr "특징 1" + +msgid "Reverse rotation" +msgstr "역회전" + +msgid "Rotate around center:" +msgstr "중심을 중심으로 회전:" + +msgid "Parallel distance:" +msgstr "평행 거리:" + +msgid "Flip by Face 2" +msgstr "면 2로 뒤집기" msgid "Notice" msgstr "공지사항" @@ -1374,10 +1585,13 @@ msgstr "구성 패키지가 로드되었지만, 일부 값이 인식되지 않 #, boost-format msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." -msgstr "구성 파일 \"%1%\"이(가) 로드되었지만 일부 값이 인식되지 않았습니다." +msgstr "구성 파일 \"%1%\"가 로드되었지만 일부 값이 인식되지 않았습니다." + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "메모리 부족으로 Snapmaker Orca가 종료됩니다. 버그일 수 있습니다. 저희 팀에 문제" @@ -1428,6 +1642,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 런타임" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1474,26 +1692,26 @@ msgstr "현재 사전 설정 로드 중" msgid "Loading a mode view" msgstr "모드 보기 로드 중" -msgid "Choose one file (3mf):" -msgstr "하나의 파일을 선택 (3mf):" +msgid "Choose one file (3MF):" +msgstr "하나의 파일을 선택 (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "하나 이상의 파일 선택 (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "하나 이상의 파일 선택 (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "하나 이상의 파일 선택 (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "하나 이상의 파일 선택 (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "ZIP 파일 선택" -msgid "Choose one file (gcode/3mf):" -msgstr "하나의 파일 선택 (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "하나의 파일 선택 (GCODE/3MF):" msgid "Some presets are modified." msgstr "일부 사전 설정이 수정 되었습니다." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "수정된 사전 설정을 새 프로젝트에 유지하거나, 변경 내용을 삭제 또는 새 사전 설" @@ -1510,7 +1728,7 @@ msgstr "프로젝트 열기" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Snapmaker Orca의 버전이 너무 낮아 최신 버전으로 업데이트해야 정상적으로 사용 가" "능합니다" @@ -1553,7 +1771,7 @@ msgid "Ongoing uploads" msgstr "진행 중인 업로드" msgid "Select a G-code file:" -msgstr "G코드 파일 선택:" +msgstr "Gcode 파일 선택:" msgid "" "Could not start URL download. Destination folder is not set. Please choose " @@ -1581,7 +1799,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Snapmaker Orca GUI 초기화 실패" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "치명적 오류, 예외 발견: %1%" msgid "Quality" @@ -1594,7 +1812,7 @@ msgid "Infill" msgstr "채우기" msgid "Support" -msgstr "지지대" +msgstr "서포트" msgid "Flush options" msgstr "버리기 옵션" @@ -1611,12 +1829,18 @@ msgstr "상부 꽉찬 레이어" msgid "Top Minimum Shell Thickness" msgstr "상단 최소 쉘 두께" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "하단 꽉찬 레이어" msgid "Bottom Minimum Shell Thickness" msgstr "하단 최소 쉘 두께" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "다림질" @@ -1630,7 +1854,7 @@ msgid "Extrusion Width" msgstr "압출 너비" msgid "Wipe options" -msgstr "닦기 옵션" +msgstr "노즐 청소 옵션" msgid "Bed adhesion" msgstr "베드 안착" @@ -1645,10 +1869,10 @@ msgid "Add modifier" msgstr "수정자 추가" msgid "Add support blocker" -msgstr "지지대 차단기 추가" +msgstr "서포트 차단기 추가" msgid "Add support enforcer" -msgstr "지지대 강제기 추가" +msgstr "서포트 강제기 추가" msgid "Add text" msgstr "텍스트 추가" @@ -1682,7 +1906,10 @@ msgid "Del" msgstr "Del" msgid "Delete the selected object" -msgstr "선택된 개체 삭제" +msgstr "선택된 객체 삭제" + +msgid "Backspace" +msgstr "" msgid "Load..." msgstr "불러오기..." @@ -1705,6 +1932,9 @@ msgstr "토러스" msgid "Orca Cube" msgstr "Orca 큐브" +msgid "Orca Tolerance Test" +msgstr "Orca 공차 테스트" + msgid "3DBenchy" msgstr "3D 벤치" @@ -1722,7 +1952,7 @@ msgstr "Orca 스트링 지옥" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1746,16 +1976,16 @@ msgid "Change type" msgstr "유형 변경" msgid "Set as an individual object" -msgstr "개별 개체로 설정" +msgstr "개별 객체로 설정" msgid "Set as individual objects" -msgstr "개별 개체로 설정" +msgstr "개별 객체로 설정" msgid "Fill bed with copies" msgstr "베드에 복사본으로 채우기" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "베드의 나머지 영역을 선택한 개체의 복사본으로 채웁니다" +msgstr "베드의 나머지 영역을 선택한 객체의 복사본으로 채웁니다" msgid "Printable" msgstr "출력 가능" @@ -1781,6 +2011,12 @@ msgstr "STL 파일로 교체" msgid "Replace the selected part with new STL" msgstr "선택한 부품을 새 STL 파일로 교체" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "필라멘트 변경" @@ -1801,49 +2037,49 @@ msgid "Scale to build volume" msgstr "출력 가능 영역에 맞게 확장" msgid "Scale an object to fit the build volume" -msgstr "출력 가능 영역에 맞게 개체 크기 조정" +msgstr "출력 가능 영역에 맞게 객체 크기 조정" msgid "Flush Options" msgstr "버리기 옵션" msgid "Flush into objects' infill" -msgstr "개체의 채우기에서 버리기" +msgstr "객체의 채우기에서 버리기" msgid "Flush into this object" -msgstr "개체에서 버리기" +msgstr "객체에서 버리기" msgid "Flush into objects' support" -msgstr "개체의 지지대에서 버리기" +msgstr "객체의 서포트에서 버리기" msgid "Edit in Parameter Table" -msgstr "개체/부품 설정에서 편집" +msgstr "객체/부품 설정에서 편집" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "인치에서 변환" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "인치로 복원" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "미터에서 변환" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "미터로 복원" msgid "Assemble" msgstr "병합" msgid "Assemble the selected objects to an object with multiple parts" -msgstr "선택한 개체를 여러 부품이 있는 개체로 조립" +msgstr "선택한 객체를 여러 부품이 있는 객체로 조립" msgid "Assemble the selected objects to an object with single part" -msgstr "선택한 개체를 단일 부품이 있는 개체로 조립" +msgstr "선택한 객체를 단일 부품이 있는 객체로 조립" msgid "Mesh boolean" -msgstr "메쉬 부울" +msgstr "메시 합집합/차집합/교집합" msgid "Mesh boolean operations including union and subtraction" -msgstr "합집합과 차집합을 포함한 메쉬 부울 연산" +msgstr "합집합과 차집합을 포함한 메시 부울 연산" msgid "Along X axis" msgstr "X축" @@ -1864,7 +2100,7 @@ msgid "Mirror along the Z axis" msgstr "Z축을 따라 반전" msgid "Mirror object" -msgstr "개체 반전" +msgstr "객체 반전" msgid "Edit text" msgstr "텍스트 편집" @@ -1894,40 +2130,49 @@ msgid "Show Labels" msgstr "이름표 보기" msgid "To objects" -msgstr "개체로" +msgstr "객체로" msgid "Split the selected object into multiple objects" -msgstr "선택한 개체를 여러 개체로 분할" +msgstr "선택한 객체를 여러 객체로 분할" msgid "To parts" msgstr "부품으로" msgid "Split the selected object into multiple parts" -msgstr "선택한 개체를 여러 부품으로 분할" +msgstr "선택한 객체를 여러 부품으로 분할" msgid "Split" msgstr "분할" msgid "Split the selected object" -msgstr "선택한 개체 분할" +msgstr "선택한 객체 분할" msgid "Auto orientation" msgstr "자동 방향 지정" -msgid "Auto orient the object to improve print quality." -msgstr "개체의 방향을 자동으로 지정하여 출력 품질을 향상시킵니다." +msgid "Auto orient the object to improve print quality" +msgstr "객체의 방향을 자동으로 지정하여 출력 품질을 향상시킵니다." + +msgid "Edit" +msgstr "편집" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" msgid "Select All" msgstr "모두 선택" msgid "select all objects on current plate" -msgstr "현재 플레이트의 모든 개체 선택" +msgstr "현재 플레이트의 모든 객체 선택" msgid "Delete All" msgstr "모두 삭제" msgid "delete all objects on current plate" -msgstr "현재 플레이트의 모든 개체 삭제" +msgstr "현재 플레이트의 모든 객체 삭제" msgid "Arrange" msgstr "정렬" @@ -1953,6 +2198,30 @@ msgstr "플레이트 삭제" msgid "Remove the selected plate" msgstr "선택된 플레이트 삭제" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "복제" @@ -1962,11 +2231,20 @@ msgstr "모델 단순화" msgid "Center" msgstr "중앙" +msgid "Drop" +msgstr "내리기" + msgid "Edit Process Settings" msgstr "프로세스 설정에서 편집" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" -msgstr "단일 개체에 대한 출력 매개변수 편집" +msgstr "단일 객체에 대한 출력 매개변수 편집" msgid "Change Filament" msgstr "필라멘트 변경" @@ -2007,29 +2285,29 @@ msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d 비다양체 가장자리" -msgid "Right click the icon to fix model object" -msgstr "아이콘을 마우스 우클릭하여 모델 개체를 고칩니다" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" -msgstr "아이콘을 마우스 우클릭하여 개체 설정을 드롭합니다" +msgstr "아이콘을 마우스 우클릭하여 객체 설정을 드롭합니다" msgid "Click the icon to reset all settings of the object" -msgstr "아이콘을 클릭하여 개체의 모든 설정을 초기화합니다" +msgstr "아이콘을 클릭하여 객체의 모든 설정을 초기화합니다" msgid "Right button click the icon to drop the object printable property" -msgstr "아이콘을 마우스 우클릭하여 개체 출력 가능 속성을 드롭합니다" +msgstr "아이콘을 마우스 우클릭하여 객체 출력 가능 속성을 드롭합니다" msgid "Click the icon to toggle printable property of the object" -msgstr "아이콘을 쿨릭하여 개체의 출력 가능한 속성을 전환합니다" +msgstr "아이콘을 쿨릭하여 객체의 출력 가능한 속성을 전환합니다" msgid "Click the icon to edit support painting of the object" -msgstr "아이콘을 클릭하여 개체의 지지대 칠하기를 편집합니다" +msgstr "아이콘을 클릭하여 객체의 서포트 칠하기를 편집합니다" msgid "Click the icon to edit color painting of the object" -msgstr "아이콘을 클릭하여 개체의 색상 칠하기를 편집합니다" +msgstr "아이콘을 클릭하여 객체의 색상 칠하기를 편집합니다" msgid "Click the icon to shift this object to the bed" -msgstr "아이콘을 클릭하여 이 개체를 베드로 옮깁니다" +msgstr "아이콘을 클릭하여 이 객체를 베드로 옮깁니다" msgid "Loading file" msgstr "파일 로딩 중" @@ -2047,35 +2325,38 @@ msgid "Add Modifier" msgstr "수정자 추가" msgid "Switch to per-object setting mode to edit modifier settings." -msgstr "개체별 설정 모드로 전환하여 수정자 설정을 편집합니다." +msgstr "객체별 설정 모드로 전환하여 수정자 설정을 편집합니다." msgid "" "Switch to per-object setting mode to edit process settings of selected " "objects." -msgstr "개체별 설정 모드로 전환하여 선택한 개체의 프로세스 설정을 편집합니다." +msgstr "객체별 설정 모드로 전환하여 선택한 객체의 프로세스 설정을 편집합니다." + +msgid "Remove paint-on fuzzy skin" +msgstr "" msgid "Delete connector from object which is a part of cut" -msgstr "잘라내기의 일부인 개체에서 커넥터 삭제" +msgstr "잘라내기의 일부인 객체에서 커넥터 삭제" msgid "Delete solid part from object which is a part of cut" -msgstr "잘라내기의 일부인 개체에서 꽉찬 부품 삭제" +msgstr "잘라내기의 일부인 객체에서 꽉찬 부품 삭제" msgid "Delete negative volume from object which is a part of cut" -msgstr "잘라내기의 일부인 개체에서 음수 비우기 용량 삭제" +msgstr "잘라내기의 일부인 객체에서 음수 비우기 용량 삭제" msgid "" "To save cut correspondence you can delete all connectors from all related " "objects." msgstr "" -"잘라내기 연결을 저장하기 위해 모든 관련 개체에서 모든 커넥터를 삭제할 수 있습" +"잘라내기 연결을 저장하기 위해 모든 관련 객체에서 모든 커넥터를 삭제할 수 있습" "니다." msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "이 조치는 잘라내기 연결을 끊습니다.\n" "그 이후에는 모델 일관성을 보장할 수 없습니다.\n" @@ -2089,8 +2370,8 @@ msgstr "모든 커넥터 삭제" msgid "Deleting the last solid part is not allowed." msgstr "마지막 꽉찬 부품을 삭제할 수 없습니다." -msgid "The target object contains only one part and can not be splited." -msgstr "대상 개체는 한 부품만 포함하고 있어 분할할 수 없습니다." +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" msgstr "조립" @@ -2099,13 +2380,13 @@ msgid "Cut Connectors information" msgstr "잘라내기 커넥터 정보" msgid "Object manipulation" -msgstr "개체 조작" +msgstr "객체 조작" msgid "Group manipulation" msgstr "그룹 조작" msgid "Object Settings to modify" -msgstr "수정할 개체 설정" +msgstr "수정할 객체 설정" msgid "Part Settings to modify" msgstr "수정할 부품 설정" @@ -2132,27 +2413,27 @@ msgid "Selection conflicts" msgstr "선택 출돌함" msgid "" -"If first selected item is an object, the second one should also be object." -msgstr "첫 번째로 선택한 항목이 개체이면 두 번째 항목도 개체여야 합니다." +"If the first selected item is an object, the second should also be an object." +msgstr "첫 번째로 선택한 항목이 객체이면 두 번째 항목도 객체여야 합니다." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" -"첫 번째로 선택한 항목이 부품이면 두 번째 항목은 동일한 개체의 부품이어야 합니" +"첫 번째로 선택한 항목이 부품이면 두 번째 항목은 동일한 객체의 부품이어야 합니" "다." msgid "The type of the last solid object part is not to be changed." -msgstr "마지막 꽉찬 개체 부품의 유형은 변경되지 않습니다." +msgstr "마지막 꽉찬 객체 부품의 유형은 변경되지 않습니다." msgid "Negative Part" msgstr "비우기 부품" msgid "Support Blocker" -msgstr "지지대 차단기" +msgstr "서포트 차단기" msgid "Support Enforcer" -msgstr "지지대 강제기" +msgstr "서포트 강제기" msgid "Type:" msgstr "유형:" @@ -2168,11 +2449,11 @@ msgstr "이름 변경 중" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "다음 모델 개체가 수리되었습니다" +msgstr[0] "다음 모델 객체가 수리되었습니다" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "다음 모델 개체 교정을 실패하였습니다" +msgstr[0] "다음 모델 객체 교정을 실패하였습니다" msgid "Repairing was canceled" msgstr "수리가 취소되었습니다" @@ -2198,7 +2479,7 @@ msgstr "잘못된 숫자입니다." msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "하나의 셀은 동일한 열에 있는 하나 이상의 셀에만 복사할 수 있습니다" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "다중 셀 복사는 지원되지 않습니다" msgid "Outside" @@ -2219,6 +2500,9 @@ msgstr "자동 브림" msgid "Mouse ear" msgstr "생쥐 귀" +msgid "Painted" +msgstr "칠해짐" + msgid "Outer brim only" msgstr "외부 브림만" @@ -2241,7 +2525,7 @@ msgid "Brim" msgstr "브림" msgid "Object/Part Setting" -msgstr "개체/부품 설정" +msgstr "객체/부품 설정" msgid "Reset parameter" msgstr "매개변수 초기화" @@ -2283,13 +2567,13 @@ msgid "Custom Template:" msgstr "사용자 정의 템플릿:" msgid "Custom G-code:" -msgstr "사용자 정의 G코드:" +msgstr "사용자 정의 Gcode:" msgid "Custom G-code" -msgstr "사용자 정의 G코드" +msgstr "사용자 정의 Gcode" msgid "Enter Custom G-code used on current layer:" -msgstr "현재 레이어에 사용될 사용자 정의 G코드 입력:" +msgstr "현재 레이어에 사용될 사용자 정의 Gcode 입력:" msgid "Jump to Layer" msgstr "다음 레이어로 이동" @@ -2304,16 +2588,16 @@ msgid "Insert a pause command at the beginning of this layer." msgstr "이 레이어의 시작 부분에 일시 정지 명령을 삽입합니다." msgid "Add Custom G-code" -msgstr "사용자 정의 G코드 추가" +msgstr "사용자 정의 Gcode 추가" msgid "Insert custom G-code at the beginning of this layer." -msgstr "이 레이어의 시작 부분에 사용자 정의 G코드를 삽입합니다." +msgstr "이 레이어의 시작 부분에 사용자 정의 Gcode를 삽입합니다." msgid "Add Custom Template" msgstr "사용자 정의 템플릿 추가" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "이 레이어의 시작 부분에 사용자 정의 템플릿 G코드를 삽입합니다." +msgstr "이 레이어의 시작 부분에 사용자 정의 템플릿 Gcode를 삽입합니다." msgid "Filament " msgstr "필라멘트 " @@ -2328,10 +2612,10 @@ msgid "Delete Custom Template" msgstr "사용자 정의 템플릿 삭제" msgid "Edit Custom G-code" -msgstr "사용자 정의 G코드 편집" +msgstr "사용자 정의 Gcode 편집" msgid "Delete Custom G-code" -msgstr "사용자 정의 G코드 삭제" +msgstr "사용자 정의 Gcode 삭제" msgid "Delete Filament Change" msgstr "필라멘트 변경 삭제" @@ -2369,23 +2653,8 @@ msgstr "프린터와 Snapmaker Orca의 네트워크 연결을 확인하세요." msgid "Connecting..." msgstr "연결 중..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "비어 있음" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "자동 리필" - -msgid "AMS not connected" -msgstr "AMS가 연결되지 않음" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "불러오기" @@ -2393,29 +2662,124 @@ msgstr "불러오기" msgid "Unload" msgstr "언로드" -msgid "Ext Spool" -msgstr "외부 스풀" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "" +"AMS 슬롯을 선택한 다음 '로드' 또는 '언로드' 버튼을 누르면 필라멘트를 자동으" +"로 로드하거나 언로드할 수 있습니다." -msgid "Tips" -msgstr "팁" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Guide" -msgstr "가이드" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" -msgid "Retry" -msgstr "재시도" +msgid "Change Anyway" +msgstr "" -msgid "Calibrating AMS..." -msgstr "AMS 교정 중..." +msgid "Off" +msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "교정하는 동안 문제가 발생했습니다. 솔루션을 보려면 클릭하세요." +msgid "Filter" +msgstr "필터" -msgid "Calibrate again" -msgstr "재교정" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" -msgid "Cancel calibration" -msgstr "교정 취소" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "냉각" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "위" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "보조" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "대기 중..." @@ -2432,44 +2796,37 @@ msgstr "현재 필라멘트를 뒤로 당깁니다" msgid "Push new filament into extruder" msgstr "새로운 필라멘트를 압출기에 밀어 넣습니다" +msgid "Grab new filament" +msgstr "새 필라멘트 가져오기" + msgid "Purge old filament" msgstr "오래된 필라멘트 제거" -msgid "Feed Filament" -msgstr "필라멘트 공급" - msgid "Confirm extruded" msgstr "압출 확인" msgid "Check filament location" msgstr "필라멘트 위치 확인" -msgid "Grab new filament" -msgstr "새 필라멘트 가져오기" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"AMS 슬롯을 선택한 다음 '로드' 또는 '언로드' 버튼을 누르면 필라멘트를 자동으" -"로 로드하거나 언로드할 수 있습니다." -msgid "Edit" -msgstr "편집" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "선택한 모든 물체는 잠긴 플레이트에 있습니다,\n" -"이러한 개체에 대해 자동 정렬을 수행할 수 없습니다." +"이러한 객체에 대해 자동 정렬을 수행할 수 없습니다." -msgid "No arrangable objects are selected." -msgstr "정렬 가능한 개체를 선택하지 않았습니다." +msgid "No arrangeable objects are selected." +msgstr "정렬 가능한 객체를 선택하지 않았습니다." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "이 플레이트는 잠겨 있습니다,\n" "이 플레이트에서 자동 정렬을 할 수 없습니다." @@ -2494,7 +2851,7 @@ msgstr "정렬 완료." msgid "" "Arrange failed. Found some exceptions when processing object geometries." -msgstr "정렬에 실패했습니다. 개체 형상을 처리할 때 일부 예외를 발견했습니다." +msgstr "정렬에 실패했습니다. 객체 형상을 처리할 때 일부 예외를 발견했습니다." #, c-format, boost-format msgid "" @@ -2502,19 +2859,19 @@ msgid "" "bed:\n" "%s" msgstr "" -"정렬이 단일 플레이트에 들어갈 수 없는 다음 개체를 무시했습니다:\n" +"정렬이 단일 플레이트에 들어갈 수 없는 다음 객체를 무시했습니다:\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "선택한 모든 물체는 잠긴 플레이트에 있습니다,\n" -"이러한 개체에 대해 자동 방향 지정을 수행할 수 없습니다." +"이러한 객체에 대해 자동 방향 지정을 수행할 수 없습니다." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "이 플레이트는 잠겨 있습니다,\n" "이 플레이트에서 자동 방향 지정을 할 수 없습니다." @@ -2568,7 +2925,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "클라우드 서비스 연결에 실패했습니다. 다시 시도하세요." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "출력파일을 찾을 수 없습니다. 다시 슬라이스하세요." msgid "" @@ -2593,7 +2950,7 @@ msgid "" "again." msgstr "출력 파일의 크기가 너무 큽니다. 파일 크기를 조정한 후 다시 시도하세요." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "출력 파일을 찾을 수 없습니다. 다시 슬라이스하여 출력전송하세요." msgid "" @@ -2629,21 +2986,58 @@ msgstr "성공적으로 보냈습니다. %s에서 자동으로 장치 페이지 msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "성공적으로 전송되었습니다. %ss의 다음 페이지로 자동으로 이동합니다" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "LAN을 통해 출력하기 전에 SD 카드를 삽입해야 합니다." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" -msgstr "LAN을 통해 G코드 파일 전송 중" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "SD 카드로 G코드 파일 전송 중" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "LAN을 통해 Gcode 파일 전송 중" + +msgid "Sending G-code file to SD card" +msgstr "SD 카드로 Gcode 파일 전송 중" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "성공적으로 보냈습니다. %s초 내에 현재 페이지가 닫힙니다" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "프린터로 전송 전에 SD 카드를 삽입해야 합니다." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "SLA 압축파일 가져오는 중" @@ -2669,10 +3063,10 @@ msgstr "" "되었습니다." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "베드에 다중 부품 개체가 있는 SLA 프로젝트를 로드할 수 없습니다" +msgstr "베드에 다중 부품 객체가 있는 SLA 프로젝트를 로드할 수 없습니다" msgid "Please check your object list before preset changing." -msgstr "사전 설정을 변경하기 전에 개체 목록을 확인하세요." +msgstr "사전 설정을 변경하기 전에 객체 목록을 확인하세요." msgid "Attention!" msgstr "주목!" @@ -2683,10 +3077,10 @@ msgstr "다운로드 중" msgid "Download failed" msgstr "다운로드 실패" -msgid "Cancelled" +msgid "Canceled" msgstr "취소됨" -msgid "Install successfully." +msgid "Installed successfully" msgstr "성공적으로 설치하였습니다." msgid "Installing" @@ -2705,13 +3099,13 @@ msgid "License" msgstr "라이센스" msgid "Snapmaker Orca is licensed under " -msgstr "Snapmaker Orca is licensed under " +msgstr "Snapmaker Orca의 라이선스는 다음과 같습니다 " msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, version 3" +msgstr "GNU Affero 일반 공용 라이선스, 버전 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca는 PrusaSlicer와 BambuStudio를 기반으로 합니다" msgid "Libraries" msgstr "라이브러리" @@ -2727,9 +3121,6 @@ msgstr "" msgid "About %s" msgstr "%s 정보" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" "Snapmaker Orca는 BambuStudio, PrusaSlicer 및 SuperSlicer를 기반으로 합니다." @@ -2759,9 +3150,6 @@ msgstr "확인" msgid "Close" msgstr "닫기" -msgid "Colour" -msgstr "색상" - msgid "" "Nozzle\n" "Temperature" @@ -2782,11 +3170,8 @@ msgstr "입력 값은 %1%보다 크고 %2%보다 작아야 합니다" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "출력 중에는 AMS 슬롯 정보 설정이 지원되지 않습니다" - msgid "Factors of Flow Dynamics Calibration" -msgstr "동적 유량 교정 계수" +msgstr "동적 압출량 교정 계수" msgid "PA Profile" msgstr "PA 사전설정" @@ -2797,6 +3182,9 @@ msgstr "K 계수" msgid "Factor N" msgstr "N 계수" +msgid "Setting AMS slot information while printing is not supported" +msgstr "출력 중에는 AMS 슬롯 정보 설정이 지원되지 않습니다" + msgid "Setting Virtual slot information while printing is not supported" msgstr "출력 중에는 가상 슬롯 정보 설정이 지원되지 않습니다" @@ -2814,6 +3202,15 @@ msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K)" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K, %.1f~%.1f 사이의 N)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "기타 색상" @@ -2821,14 +3218,14 @@ msgid "Custom Color" msgstr "사용자 정의 색상" msgid "Dynamic flow calibration" -msgstr "동적 유량 교정" +msgstr "동적 압출량 교정" msgid "" "The nozzle temp and max volumetric speed will affect the calibration " "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"노즐 온도와 최대 체적 속도는 교정 결과에 영향을 미칩니다. 실제 출력과 동일한 " +"노즐 온도와 최대 압출 속도는 교정 결과에 영향을 미칩니다. 실제 출력과 동일한 " "값을 입력하세요. 필라멘트 사전 설정을 선택하여 자동으로 입력할 수 있습니다." msgid "Nozzle Diameter" @@ -2844,17 +3241,11 @@ msgid "Bed Temperature" msgstr "베드 온도" msgid "Max volumetric speed" -msgstr "최대 체적 속도" - -msgid "℃" -msgstr "℃" +msgstr "최대 압출 속도" msgid "Bed temperature" msgstr "베드 온도" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "교정 시작" @@ -2890,17 +3281,84 @@ msgid "%s does not support %s" msgstr "%s 은(는) %s 을(를) 지원하지 않습니다" msgid "Dynamic flow Calibration" -msgstr "동적 유량 교정" +msgstr "동적 압출량 교정" msgid "Step" msgstr "단계" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS 슬롯" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "외부" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "노즐" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "참고: 동일한 재료 유형으로 장착된 AMS 슬롯만 선택할 수 있습니다." +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" msgstr "AMS 사용" @@ -2914,13 +3372,10 @@ msgstr "AMS 미사용" msgid "Print with the filament mounted on the back of chassis" msgstr "섀시 뒷면에 필라멘트를 장착한 상태에서 출력" -msgid "Current Cabin humidity" -msgstr "현재 기내 습도" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "건조제가 너무 젖으면 교체하세요. 뚜껑이 열려 있거나 건조제 팩을 교체한 경우, " @@ -2928,7 +3383,7 @@ msgstr "" "우 등에는 표시기가 정확하게 표시되지 않을 수 있습니다." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "출력 작업에 사용되는 필라멘트에 사용할 AMS 슬롯 구성" msgid "Filament used in this print job" @@ -2946,20 +3401,37 @@ msgstr "AMS 비활성" msgid "Print using materials mounted on the back of the case" msgstr "케이스 뒷면에 장착된 재료를 사용하여 출력" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "AMS의 필라멘트로 출력" msgid "Print with filaments mounted on the back of the chassis" msgstr "섀시 뒷면에 필라멘트를 장착하여 출력" +msgid "Auto Refill" +msgstr "자동 리필" + +msgid "Left" +msgstr "왼쪽" + +msgid "Right" +msgstr "오른쪽" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "현재 재료가 소진되면 프린터는 다음 순서로 계속 출력합니다." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "그룹" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "프린터는 현재 자동 리필을 지원하지 않습니다." @@ -2968,14 +3440,10 @@ msgid "" msgstr "AMS 필라멘트 백업이 활성화되지 않았습니다. AMS 설정에서 활성화하세요." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"AMS에 두 개의 동일한 필라멘트가 있는 경우 AMS 필라멘트 백업이 활성화됩니" -"다. \n" -"(현재 동일한 브랜드, 재질, 색상의 소모품 자동 공급 지원)" msgid "DRY" msgstr "건조함" @@ -2997,7 +3465,7 @@ msgstr "" "업은 약 20초 정도 걸립니다." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "참고: 출력 중에 새 필라멘트를 삽입하면 출력가 완료될 때까지 AMS가 자동으로 정" @@ -3015,8 +3483,8 @@ msgstr "업데이트 전원 유지" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS는 시동 시 삽입된 필라멘트의 정보를 자동으로 읽습니다. 1분 정도 걸립니다. " "판독 프로세스는 필라멘트 스풀을 롤링합니다." @@ -3033,25 +3501,22 @@ msgid "Update remaining capacity" msgstr "남은 용량 업데이트" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS는 필라멘트 정보가 업데이트된 후 뱀부 필라멘트의 잔여 용량을 추정할 것입니" -"다. 출력하는 동안 남은 용량이 자동으로 업데이트됩니다." msgid "AMS filament backup" msgstr "AMS 필라멘트 백업" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS는 현재 필라멘트가 소진되면 동일한 필라멘트 특성을 가진 다른 스풀로 자동으" "로 이동합니다" msgid "Air Printing Detection" -msgstr "에어 프린팅 감지" +msgstr "허공 출력 감지" msgid "" "Detects clogging and filament grinding, halting printing immediately to " @@ -3102,11 +3567,15 @@ msgid "" msgstr "" "오류가 발생했습니다. 시스템 메모리가 부족하거나 프로그램의 버그일 수 있습니다" -msgid "Please save project and restart the program. " -msgstr "프로젝트를 저장하고 프로그램을 다시 시작하세요. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "치명적인 오류가 발생했습니다: “%1%”" -msgid "Processing G-Code from Previous file..." -msgstr "이전 파일의 G코드를 처리하는 중..." +msgid "Please save project and restart the program." +msgstr "프로젝트를 저장하고 프로그램을 다시 시작하세요." + +msgid "Processing G-code from Previous file..." +msgstr "이전 파일의 Gcode를 처리하는 중..." msgid "Slicing complete" msgstr "슬라이싱 완료" @@ -3133,13 +3602,13 @@ msgid "Stack overflow" msgstr "스택 오버플로" msgid "Running post-processing scripts" -msgstr "사후 처리 스크립트 실행중" +msgstr "후처리 스크립트 실행중" msgid "Successfully executed post-processing script" msgstr "성공적으로 실행된 후처리 스크립트" -msgid "Unknown error occured during exporting G-code." -msgstr "G코드를 내보내는 동안 알 수 없는 오류가 발생했습니다." +msgid "Unknown error occurred during exporting G-code." +msgstr "Gcode를 내보내는 동안 알 수 없는 오류가 발생했습니다." #, boost-format msgid "" @@ -3147,7 +3616,7 @@ msgid "" "card is write locked?\n" "Error message: %1%" msgstr "" -"임시 G코드를 출력 G코드로 복사하지 못했습니다. SD 카드가 쓰기 잠겨 있나요?\n" +"임시 Gcode를 출력 Gcode로 복사하지 못했습니다. SD 카드가 쓰기 잠겨 있나요?\n" "오류 메시지입니다: %1%" #, boost-format @@ -3156,8 +3625,8 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" -"임시 G코드를 출력 G코드로 복사하지 못했습니다. 대상 장치에 문제가 있을 수 있" -"으니 다시 내보내거나 다른 장치를 사용해 보세요. 손상된 출력 G코드는 %1%.tmp" +"임시 Gcode를 출력 Gcode로 복사하지 못했습니다. 대상 장치에 문제가 있을 수 있" +"으니 다시 내보내거나 다른 장치를 사용해 보세요. 손상된 출력 Gcode는 %1%.tmp" "에 있습니다." #, boost-format @@ -3165,7 +3634,7 @@ msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" -"선택한 대상 폴더로 복사한 후 G코드의 이름을 바꾸지 못했습니다. 현재 경로는 " +"선택한 대상 폴더로 복사한 후 Gcode의 이름을 바꾸지 못했습니다. 현재 경로는 " "%1%.tmp입니다. 내보내기를 다시 시도하세요." #, boost-format @@ -3173,7 +3642,7 @@ msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"임시 G코드의 복사가 완료되었지만 복사 확인 중에 %1%의 원본 코드를 열 수 없습" +"임시 Gcode의 복사가 완료되었지만 복사 확인 중에 %1%의 원본 코드를 열 수 없습" "니다. 출력 G-코드는 %2%.tmp에 있습니다." #, boost-format @@ -3181,252 +3650,33 @@ msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"임시 G코드 복사가 완료되었지만 복사 확인 중에 내보낸 코드를 열 수 없습니다. " +"임시 Gcode 복사가 완료되었지만 복사 확인 중에 내보낸 코드를 열 수 없습니다. " "출력 G-코드는 %1%.tmp에 있습니다." #, boost-format msgid "G-code file exported to %1%" -msgstr "%1%로 내보낸 G코드 파일" +msgstr "%1%로 내보낸 Gcode 파일" -msgid "Unknown error when export G-code." -msgstr "G코드를 내보낼 때 알 수 없는 오류가 발생했습니다." +msgid "Unknown error when exporting G-code." +msgstr "Gcode를 내보낼 때 알 수 없는 오류가 발생했습니다." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"G코드 파일을 저장하지 못했습니다.\n" +"Gcode 파일을 저장하지 못했습니다.\n" "오류 메시지: %1%.\n" "원본 파일 %2%." msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "출력 G코드에 임시 G코드를 복사하지 못했습니다" +msgstr "출력 Gcode에 임시 Gcode를 복사하지 못했습니다" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "%1%로 업로드 예약 중. 윈도우 -> 호스트 업로드 출력 대기열 참조" -msgid "Device" -msgstr "장치" - -msgid "Task Sending" -msgstr "작업 전송중" - -msgid "Task Sent" -msgstr "작업 전송됨" - -msgid "Edit multiple printers" -msgstr "여러 프린터 편집" - -msgid "Select connected printers (0/6)" -msgstr "연결된 프린터 선택 (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "연결된 프린터 선택 (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "선택할 수 있는 최대 프린터 수는 %d입니다" - -msgid "Offline" -msgstr "오프라인" - -msgid "No task" -msgstr "작업 없음" - -msgid "View" -msgstr "시점" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "프린터 편집" - -msgid "Device Name" -msgstr "장치 이름" - -msgid "Task Name" -msgstr "작업 이름" - -msgid "Device Status" -msgstr "장치 상태" - -msgid "Actions" -msgstr "동작" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "여기에서 관리할 장치를 선택하세요 (최대 6개 장치)" - -msgid "Add" -msgstr "추가" - -msgid "Idle" -msgstr "대기 중" - -msgid "Printing" -msgstr "출력 중" - -msgid "Upgrading" -msgstr "업그레이드 하기" - -msgid "Incompatible" -msgstr "호환되지 않음" - -msgid "syncing" -msgstr "동기화" - -msgid "Printing Finish" -msgstr "인쇄 완료" - -msgid "Printing Failed" -msgstr "인쇄 실패" - -msgid "Printing Pause" -msgstr "인쇄 일시중지" - -msgid "Prepare" -msgstr "준비 하기" - -msgid "Slicing" -msgstr "슬라이싱" - -msgid "Pending" -msgstr "대기중" - -msgid "Sending" -msgstr "전송중" - -msgid "Sending Finish" -msgstr "보내기 완료" - -msgid "Sending Cancel" -msgstr "보내기 취소" - -msgid "Sending Failed" -msgstr "전송 실패" - -msgid "Print Success" -msgstr "인쇄 성공" - -msgid "Print Failed" -msgstr "인쇄 실패" - -msgid "Removed" -msgstr "삭제됨" - -msgid "Resume" -msgstr "계속" - -msgid "Stop" -msgstr "정지" - -msgid "Task Status" -msgstr "작업 상태" - -msgid "Sent Time" -msgstr "전송한 시간" - -msgid "There are no tasks to be sent!" -msgstr "전송할 작업이 없습니다!" - -msgid "No historical tasks!" -msgstr "작업 내역이 없습니다!" - -msgid "Loading..." -msgstr "로딩 중..." - -msgid "No AMS" -msgstr "AMS 없음" - -msgid "Send to Multi-device" -msgstr "여러 장치로 보내기" - -msgid "Preparing print job" -msgstr "출력 작업 준비 중" - -msgid "Abnormal print file data. Please slice again" -msgstr "비정상적인 출력 파일 데이터입니다. 다시 슬라이스하세요" - -msgid "There is no device available to send printing." -msgstr "인쇄를 전송할 수 있는 장치가 없습니다." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "동시에 사용 중인 프린터의 수는 0과 같을 수 없습니다." - -msgid "Use External Spool" -msgstr "외부 스풀 사용" - -msgid "Use AMS" -msgstr "AMS 사용" - -msgid "Select Printers" -msgstr "프린터 선택" - -msgid "Ams Status" -msgstr "AMS 상태" - -msgid "Printing Options" -msgstr "인쇄 옵션" - -msgid "Bed Leveling" -msgstr "베드 레벨링" - -msgid "Timelapse" -msgstr "타임랩스" - -msgid "Flow Dynamic Calibration" -msgstr "유량 동적 보정" - -msgid "Send Options" -msgstr "전송 옵션" - -msgid "Send to" -msgstr "받는사람" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "전송" - -msgid "Name is invalid;" -msgstr "이름이 잘못되었습니다;" - -msgid "illegal characters:" -msgstr "잘못된 문자:" - -msgid "illegal suffix:" -msgstr "잘못된 접미사:" - -msgid "The name is not allowed to be empty." -msgstr "이름은 비워 둘 수 없습니다." - -msgid "The name is not allowed to start with space character." -msgstr "이름은 공백으로 시작할 수 없습니다." - -msgid "The name is not allowed to end with space character." -msgstr "이름은 공백으로 끝날 수 없습니다." - -msgid "The name length exceeds the limit." -msgstr "이름 길이가 제한을 초과합니다." - msgid "Origin" msgstr "원점" @@ -3436,7 +3686,7 @@ msgstr "직사각형 플레이트의 X 및 Y 크기." msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." -msgstr "직사각형의 전면 왼쪽 모서리에서 G코드 좌표 0,0 까지의 거리입니다." +msgstr "직사각형의 전면 왼쪽 모서리에서 Gcode 좌표 0,0 까지의 거리입니다." msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " @@ -3492,10 +3742,13 @@ msgstr "베드 모델을 가져올 STL 파일 선택:" msgid "Bed Shape" msgstr "베드 모양" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" -msgstr "권장 최저 온도는 190도 미만 또는 권장 최고 온도는 300도 이상입니다.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" +msgstr "" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3516,21 +3769,21 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "이 필라멘트 유형의 권장 노즐 온도는 [%d, %d]°C입니다" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" -"최대 체적 속도가 너무 작습니다.\n" +"최대 압출 속도가 너무 작습니다.\n" "0.5로 재설정" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높으므로 재료가 부드러워지고 막힐 수 있" @@ -3538,14 +3791,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "레이어 높이가 너무 작습니다.\n" "0.2로 재설정" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "다림질 간격이 너무 작습니다.\n" "0.1로 재설정" @@ -3588,15 +3841,15 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"세로 셸 두께가 모두로 설정된 경우 대체 여분의 벽이 제대로 작동하지 않습니다. " +"세로 쉘 두께가 모두로 설정된 경우 대체 여분의 벽이 제대로 작동하지 않습니다." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "이 설정을 자동으로 변경하시겠습니까?\n" "예 - 수직 셸 두께 보장을 보통으로 변경하고 대체 추가 벽을 활성화합니다\n" @@ -3609,11 +3862,11 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"적응형 레이어 높이 또는 독립적 지지대 레이어 높이가 켜져 있으면 프라임 타워" +"적응형 레이어 높이 또는 독립적 서포트 레이어 높이가 켜져 있으면 프라임 타워" "가 작동하지 않습니다.\n" "어떤 것을 유지하시겠습니까?\n" "예 - 프라임 타워 유지\n" -"아니요 - 적응형 레이어 높이 및 독립적 지지대 레이어 높이 유지" +"아니요 - 적응형 레이어 높이 및 독립적 서포트 레이어 높이 유지" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3632,17 +3885,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"독립적 지지대 레이어 높이가 켜져 있으면 프라임 타워가 작동하지 않습니다.\n" +"독립적 서포트 레이어 높이가 켜져 있으면 프라임 타워가 작동하지 않습니다.\n" "어떤 것을 유지하시겠습니까?\n" "예 - 프라임 타워 유지\n" -"아니요 - 독립적 지지대 레이어 높이 유지" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"개체별 출력시 압출기가 스커트와 충돌할 수 있습니다.\n" -"스커트 레이어를 1로 재설정하여 이를 방지합니다." +"아니요 - 독립적 서포트 레이어 높이 유지" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" @@ -3651,18 +3897,35 @@ msgstr "" "심_경사_시작_높이는 레이어_높이보다 작아야 합니다.\n" "0으로 재설정합니다." +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"나선형 모드는 벽 루프 1, 지지대 비활성화, 상단 셸 레이어 0, 드문 채우기 밀도 " -"0, 타임랩스 유형이 기존인 경우에만 작동합니다." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " 그러나 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" @@ -3670,14 +3933,17 @@ msgstr "" "예 - 이 설정을 변경하고 나선 모드를 자동으로 활성화합니다\n" "아니오 - 이번에는 나선 모드 사용을 포기합니다" +msgid "Printing" +msgstr "출력 중" + msgid "Auto bed leveling" msgstr "자동 베드 레벨링" msgid "Heatbed preheating" msgstr "베드 예열" -msgid "Sweeping XY mech mode" -msgstr "스위핑 XY 기계 모드" +msgid "Vibration compensation" +msgstr "진동 보정" msgid "Changing filament" msgstr "필라멘트 변경 중" @@ -3685,14 +3951,14 @@ msgstr "필라멘트 변경 중" msgid "M400 pause" msgstr "M400 일시 정지" -msgid "Paused due to filament runout" -msgstr "필라멘트 소진으로 일시 정지됨" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "핫엔드 가열 중" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "압출 교정 중" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "베드 표면 스캔 중" @@ -3715,78 +3981,138 @@ msgstr "노즐 팁 청소 중" msgid "Checking extruder temperature" msgstr "압출기 온도 확인 중" -msgid "Printing was paused by the user" -msgstr "사용자가 출력을 일시 정지했습니다" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "전면 커버 분리로 일시 정지됨" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "마이크로 라이다 교정" -msgid "Calibrating extrusion flow" -msgstr "압출 유량 교정" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "노즐 온도 오작동으로 일시 정지됨" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "히트 베드 온도 오작동으로 일시 정지됨" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "필라멘트 빼는 중" -msgid "Skip step pause" -msgstr "단계 건너뛰기 일시중지" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "필라멘트 넣는 중" -msgid "Motor noise calibration" -msgstr "모터 소음 교정" +msgid "Motor noise cancellation" +msgstr "모터 소음 제거" -msgid "Paused due to AMS lost" -msgstr "AMS 정보 손실로 인해 일시중지됨" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "느린 방열팬 속도로 일시중지됨" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "챔버 온도 제어 오류로 인해 일시 중지됨" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "챔버 냉각" -msgid "Paused by the Gcode inserted by user" -msgstr "사용자가 삽입한 G코드로 인해 일시중지됨" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "모터 소음 표시" -msgid "Nozzle filament covered detected pause" -msgstr "노즐 필라멘트가 덮여있는게 감지되어 일시중지" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "커터 오류 일시중지" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "첫번째 레이어 오류 일시중지" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "노즐 막힘 일시 중지" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "알 수 없는" -msgid "Fatal" -msgstr "치명적" - -msgid "Serious" -msgstr "심각한" - -msgid "Common" -msgstr "일반적" - msgid "Update successful." msgstr "업데이트에 성공했습니다." @@ -3799,31 +4125,56 @@ msgstr "확인에 실패했습니다." msgid "Update failed." msgstr "업데이트에 실패했습니다." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"현재 챔버 온도 또는 목표 챔버 온도가 45℃를 초과합니다. 압출기 막힘을 방지하" -"기 위해 저온 필라멘트(PLA/PETG/TPU)를 로드할 수 없습니다." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"압출기에 저온 필라멘트(PLA/PETG/TPU)가 장착되어 있습니다. 압출기 막힘을 방지" -"하기 위해 챔버 온도를 45℃ 이상으로 설정할 수 없습니다." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "챔버 온도를 40℃ 이하로 설정하면 챔버 온도 제어가 활성화되지 않습니다. 그리고 " "목표 챔버 온도는 자동으로 0℃ 로 설정됩니다." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "출력 작업을 시작하지 못했습니다" msgid "" @@ -3831,52 +4182,99 @@ msgid "" msgstr "이 교정은 현재 선택된 노즐 직경을 지원하지 않습니다" msgid "Current flowrate cali param is invalid" -msgstr "현재 유량 교정 매개변수가 잘못되었습니다" +msgstr "현재 압출량 교정 매개변수가 잘못되었습니다" msgid "Selected diameter and machine diameter do not match" msgstr "선택한 직경과 장치의 직경이 일치하지 않습니다" -msgid "Failed to generate cali gcode" -msgstr "교정 G코드를 생성하지 못했습니다" +msgid "Failed to generate cali G-code" +msgstr "교정 Gcode를 생성하지 못했습니다" msgid "Calibration error" msgstr "교정 오류" -msgid "TPU is not supported by AMS." -msgstr "TPU는 AMS에서 지원되지 않습니다." +msgid "Resume Printing" +msgstr "출력 재개" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "뱀부 PET-CF/PA6-CF는 AMS에서 지원되지 않습니다." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"습한 PVA는 유연해져서 AMS 내부에 달라붙게 됩니다. 사용하기 전에 건조시키십시" -"오." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "출력 중지" + +msgid "Check Assistant" +msgstr "어시스턴트 확인" + +msgid "Filament Extruded, Continue" +msgstr "필라멘트 압출, 계속" + +msgid "Not Extruded Yet, Retry" +msgstr "아직 압출되지 않았습니다. 다시 시도하세요" + +msgid "Finished, Continue" +msgstr "완료, 계속" + +msgid "Load Filament" +msgstr "필라멘트 넣기" + +msgid "Filament Loaded, Resume" +msgstr "필라멘트 로드됨, 재개" + +msgid "View Liveview" +msgstr "실시간 보기" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "완료" + +msgid "Retry" +msgstr "재시도" + +msgid "Resume" +msgstr "계속" + +msgid "Unknown error." msgstr "" -"CF/GF 필라멘트는 단단하고 부서지기 쉽습니다. AMS에 걸리거나 부러지기 쉬우므" -"로 주의하여 사용하세요." msgid "default" msgstr "기본값" #, boost-format msgid "Edit Custom G-code (%1%)" -msgstr "사용자 지정 G코드 편집 (%1%)" +msgstr "사용자 지정 Gcode 편집 (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" -msgstr "기본 제공 플레이스홀더 (항목을 두 번 클릭하여 G코드에 추가)" +msgstr "기본 제공 플레이스홀더 (항목을 두 번 클릭하여 Gcode에 추가)" -msgid "Search gcode placeholders" -msgstr "G코드 자리 표시자 검색" +#, fuzzy +msgid "Search G-code placeholders" +msgstr "Gcode 자리 표시자 검색" msgid "Add selected placeholder to G-code" -msgstr "선택한 플레이스홀더를 G코드에 추가" +msgstr "선택한 플레이스홀더를 Gcode에 추가" msgid "Select placeholder" msgstr "자리 표시자 선택" @@ -3897,7 +4295,7 @@ msgid "Print Statistics" msgstr "통계 출력" msgid "Objects Info" -msgstr "개체 정보" +msgstr "객체 정보" msgid "Dimensions" msgstr "치수" @@ -3931,7 +4329,7 @@ msgid "parameter name" msgstr "매개변수 이름" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s 는 백분율일 수 없습니다" #, c-format, boost-format @@ -3970,10 +4368,27 @@ msgstr "입력된 값이 범위를 벗어납니다" msgid "Some extension in the input is invalid" msgstr "입력의 일부 확장자가 유효하지 않습니다" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "잘못된 형식입니다. 필요한 벡터 형식: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "레이어 높이" @@ -3983,11 +4398,8 @@ msgstr "선 너비" msgid "Fan Speed" msgstr "팬 속도" -msgid "Temperature" -msgstr "온도" - msgid "Flow" -msgstr "유량" +msgstr "압출량" msgid "Tool" msgstr "툴" @@ -4008,7 +4420,7 @@ msgid "Speed: " msgstr "속도: " msgid "Flow: " -msgstr "유량: " +msgstr "압출량: " msgid "Layer Time: " msgstr "레이어 시간: " @@ -4019,8 +4431,8 @@ msgstr "팬: " msgid "Temperature: " msgstr "온도: " -msgid "Loading G-codes" -msgstr "G코드 불러오는 중" +msgid "Loading G-code" +msgstr "Gcode 불러오는 중" msgid "Generating geometry vertex data" msgstr "기하학 정점 데이터 생성" @@ -4052,17 +4464,86 @@ msgstr "시간 합계" msgid "Total cost" msgstr "총 비용" -msgid "Color Scheme" -msgstr "색 구성표" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "팁:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "팁" + +msgid "up to" +msgstr "까지" + +msgid "above" +msgstr "위에" + +msgid "from" +msgstr "부터" msgid "Time" msgstr "시간" -msgid "Percent" -msgstr "퍼센트" - -msgid "Used filament" -msgstr "사용된 필라멘트" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "레이어 높이(mm)" @@ -4080,13 +4561,13 @@ msgid "Temperature (°C)" msgstr "온도 (°C)" msgid "Volumetric flow rate (mm³/s)" -msgstr "체적 유량 (mm³/s)" +msgstr "압출 압출량 (mm³/s)" msgid "Travel" msgstr "이동" msgid "Seams" -msgstr "솔기" +msgstr "재봉선" msgid "Retract" msgstr "후퇴" @@ -4098,7 +4579,7 @@ msgid "Filament Changes" msgstr "필라멘트 변경" msgid "Wipe" -msgstr "닦기" +msgstr "노즐 청소" msgid "Options" msgstr "옵션" @@ -4109,25 +4590,22 @@ msgstr "이동" msgid "Extruder" msgstr "압출기" -msgid "Filament change times" -msgstr "필라멘트 변경 시간" - msgid "Cost" msgstr "비용" -msgid "Print" -msgstr "출력" +msgid "Filament change times" +msgstr "필라멘트 변경 시간" msgid "Color change" msgstr "색 변경" +msgid "Print" +msgstr "출력" + msgid "Printer" msgstr "프린터" -msgid "Custom g-code" -msgstr "사용자 정의 G코드" - -msgid "ToolChange" +msgid "Tool Change" msgstr "툴체인지" msgid "Time Estimation" @@ -4154,6 +4632,19 @@ msgstr "무음 모드로 전환" msgid "Switch to normal mode" msgstr "일반 모드로 전환" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "레이어 높이 가변" @@ -4172,27 +4663,15 @@ msgstr "반경" msgid "Keep min" msgstr "최소로 유지" -msgid "Left mouse button:" -msgstr "마우스 왼쪽 버튼:" - msgid "Add detail" msgstr "세부정보 추가" -msgid "Right mouse button:" -msgstr "마우스 오른쪽 버튼:" - msgid "Remove detail" msgstr "세부정보 삭제" -msgid "Shift + Left mouse button:" -msgstr "Shift + 마우스 왼쪽 버튼:" - msgid "Reset to base" msgstr "기본으로 초기화" -msgid "Shift + Right mouse button:" -msgstr "Shift + 마우스 오른쪽 버튼:" - msgid "Smoothing" msgstr "스무딩" @@ -4205,8 +4684,57 @@ msgstr "편집 영역 증가/감소" msgid "Sequence" msgstr "순서" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" -msgstr "개체 반전" +msgstr "객체 반전" msgid "Tool Move" msgstr "툴 이동" @@ -4215,7 +4743,7 @@ msgid "Tool Rotate" msgstr "툴 회전" msgid "Move Object" -msgstr "개체 이동" +msgstr "객체 이동" msgid "Auto Orientation options" msgstr "자동 방향 지정 옵션" @@ -4224,7 +4752,7 @@ msgid "Enable rotation" msgstr "회전 활성화" msgid "Optimize support interface area" -msgstr "지지대 접점 영역 최적화" +msgstr "서포트 접점 영역 최적화" msgid "Orient" msgstr "방향" @@ -4250,20 +4778,34 @@ msgstr "압출 교정 영역을 피하세요" msgid "Align to Y axis" msgstr "Y축에 정렬" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "추가" + msgid "Add plate" msgstr "플레이트 추가" -msgid "Auto orient" -msgstr "자동 방향 지정" +msgid "Auto orient all/selected objects" +msgstr "모든/선택한 객체 자동 방향 지정" + +msgid "Auto orient all objects on current plate" +msgstr "현재 플레이트의 모든 객체를 자동으로 방향 지정" msgid "Arrange all objects" -msgstr "모든 개체 정렬" +msgstr "모든 객체 정렬" msgid "Arrange objects on selected plates" -msgstr "선택한 플레이트의 개체 정렬" +msgstr "선택한 플레이트의 객체 정렬" msgid "Split to objects" -msgstr "개체로 분할" +msgstr "객체로 분할" msgid "Split to parts" msgstr "부품으로 분할" @@ -4274,12 +4816,30 @@ msgstr "조립 보기" msgid "Select Plate" msgstr "플레이트 선택" +msgid "Slicing" +msgstr "슬라이싱" + +msgid "Slice all" +msgstr "모두 슬라이스" + +msgid "Failed" +msgstr "실패" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "조립 되돌리기" -msgid "return" +msgid "Return" msgstr "돌아가기" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "칠하기 도구 모음" @@ -4292,6 +4852,9 @@ msgstr "단면도" msgid "Assemble Control" msgstr "조립 제어" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "총 용량:" @@ -4306,47 +4869,83 @@ msgstr "크기:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"레이어 %d, z = %.2lf mm에서 G코드 경로 충돌이 발견되었습니다. 충돌하는 개체" +"레이어 %d, Z = %.2lf mm에서 Gcode 경로 충돌이 발견되었습니다. 충돌하는 객체" "를 더 멀리 분리하세요 (%s <-> %s)." -msgid "An object is layed over the boundary of plate." -msgstr "개체가 플레이트 경계 위에 놓여 있습니다." +msgid "An object is laid over the plate boundaries." +msgstr "객체가 플레이트 경계 위에 놓여 있습니다." msgid "A G-code path goes beyond the max print height." -msgstr "G코드 경로가 출력 최대 높이를 넘어갑니다." +msgstr "Gcode 경로가 출력 최대 높이를 넘어갑니다." -msgid "A G-code path goes beyond the boundary of plate." -msgstr "G코드 경로가 플레이트 경계를 넘어갑니다." +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Gcode 경로가 플레이트 경계를 넘어갑니다." -msgid "Only the object being edit is visible." -msgstr "편집 중인 개체만 표시됩니다." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "편집 중인 객체만 표시됩니다." + +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"개체가 플레이트 경계를 넘었거나 높이 제한을 초과했습니다.\n" -"플레이트 위 또는 밖으로 완전히 이동시키고 높이가 빌드 출력 가능 영역 내에 있" -"는지 확인하여 문제를 해결하세요." msgid "Calibration step selection" msgstr "교정 단계 선택" msgid "Micro lidar calibration" -msgstr "마이크로 레이더 교정" +msgstr "마이크로 라이다 교정" msgid "Bed leveling" msgstr "베드 레벨링" -msgid "Vibration compensation" -msgstr "진동 보정" - -msgid "Motor noise cancellation" -msgstr "모터 소음 제거" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "교정 프로그램" @@ -4360,7 +4959,7 @@ msgstr "" "이를 통해 장치가 최적의 성능을 유지하도록 합니다." msgid "Calibration Flow" -msgstr "유량 교정" +msgstr "압출량 교정" msgid "Start Calibration" msgstr "교정 시작" @@ -4381,7 +4980,7 @@ msgid "Go Live" msgstr "실시간" msgid "Liveview Retry" -msgstr "라이브뷰 재시도" +msgstr "실시간 화면보기 재시도" msgid "Resolution" msgstr "해상도" @@ -4398,24 +4997,21 @@ msgstr "커스텀 카메라 소스" msgid "Show \"Live Video\" guide page." msgstr "라이브 비디오 가이드 페이지를 표시합니다." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "프린터 연결(LAN)" msgid "Please input the printer access code:" msgstr "프린터 액세스 코드를 입력:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"\"설정 > 네트워크 > 연결코드\"에서 확인하실 수 있습니다\n" -"또는 그림에 표시된 것처럼 프린터에 표시됩니다:" msgid "Invalid input." msgstr "잘못된 입력입니다." @@ -4435,9 +5031,15 @@ msgstr "일부 사전 설정을 수정하는 동안 응용 프로그램을 닫 msgid "Logging" msgstr "로깅" +msgid "Prepare" +msgstr "준비 하기" + msgid "Preview" msgstr "미리 보기" +msgid "Device" +msgstr "장치" + msgid "Multi-device" msgstr "멀티 디바이스" @@ -4459,11 +5061,11 @@ msgstr "플레이트 슬라이스" msgid "Print plate" msgstr "플레이트 출력" -msgid "Slice all" -msgstr "모두 슬라이스" - msgid "Export G-code file" -msgstr "G코드 파일 내보내기" +msgstr "Gcode 파일 내보내기" + +msgid "Send" +msgstr "전송" msgid "Export plate sliced file" msgstr "플레이트 슬라이스 파일 내보내기" @@ -4477,6 +5079,9 @@ msgstr "모두 출력" msgid "Send all" msgstr "모두 전송" +msgid "Send to Multi-device" +msgstr "여러 장치로 보내기" + msgid "Keyboard Shortcuts" msgstr "키보드 단축키" @@ -4511,10 +5116,6 @@ msgstr "모델 다운로드" msgid "Default View" msgstr "기본 보기" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "위" - msgid "Top View" msgstr "위에서 보기" @@ -4537,15 +5138,9 @@ msgstr "뒤" msgid "Rear View" msgstr "뒤에서 보기" -msgid "Left" -msgstr "왼쪽" - msgid "Left View" msgstr "왼쪽에서 보기" -msgid "Right" -msgstr "오른쪽" - msgid "Right View" msgstr "오른쪽에서 보기" @@ -4561,8 +5156,8 @@ msgstr "새 프로젝트 시작" msgid "Open a project file" msgstr "프로젝트 파일 열기" -msgid "Recent projects" -msgstr "최근 프로젝트" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "프로젝트 저장" @@ -4573,9 +5168,6 @@ msgstr "현재 프로젝트를 파일로 저장" msgid "Save Project as" msgstr "프로젝트 다른 이름으로 저장" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "현재 프로젝트 다른 이름으로 저장" @@ -4601,16 +5193,16 @@ msgid "Import" msgstr "가져오기" msgid "Export all objects as one STL" -msgstr "모든 개체를 하나의 STL로 내보내기" +msgstr "모든 객체를 하나의 STL로 내보내기" msgid "Export all objects as STLs" -msgstr "모든 개체를 여러 STL로 내보내기" +msgstr "모든 객체를 여러 STL로 내보내기" msgid "Export Generic 3MF" msgstr "일반 3MF 내보내기" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "일부 3mf 확장자를 사용하지 않고 3mf 파일 내보내기" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "일부 3MF 확장자를 사용하지 않고 3MF 파일 내보내기" msgid "Export current sliced file" msgstr "현재 슬라이스 파일 내보내기" @@ -4619,10 +5211,13 @@ msgid "Export all plate sliced file" msgstr "모든 플레이트의 슬라이스 파일 내보내기" msgid "Export G-code" -msgstr "G코드 내보내기" +msgstr "Gcode 내보내기" msgid "Export current plate as G-code" -msgstr "현재 플레이트를 G코드로 내보내기" +msgstr "현재 플레이트를 Gcode로 내보내기" + +msgid "Export toolpaths as OBJ" +msgstr "툴 경로를 OBJ로 내보내기" msgid "Export Preset Bundle" msgstr "프리셋 번들 내보내기" @@ -4667,25 +5262,31 @@ msgid "Delete all" msgstr "모두 삭제" msgid "Deletes all objects" -msgstr "모든 개체 삭제" +msgstr "모든 객체 삭제" msgid "Clone selected" -msgstr "선택된 개체 복제" +msgstr "선택된 객체 복제" msgid "Clone copies of selections" -msgstr "선택된 개체의 복사본 복제" +msgstr "선택된 객체의 복사본 복제" + +msgid "Duplicate Current Plate" +msgstr "현재 플레이트 복제" + +msgid "Duplicate the current plate" +msgstr "현재 플레이트 복제" msgid "Select all" msgstr "모두 선택" msgid "Selects all objects" -msgstr "모든 개체 선택" +msgstr "모든 객체 선택" msgid "Deselect all" msgstr "모든 선택 취소" msgid "Deselects all objects" -msgstr "모든 개체 선택 취소" +msgstr "모든 객체 선택 취소" msgid "Use Perspective View" msgstr "원근법 보기 사용" @@ -4693,16 +5294,25 @@ msgstr "원근법 보기 사용" msgid "Use Orthogonal View" msgstr "평행 투영 보기 사용" -msgid "Show &G-code Window" -msgstr "G코드 창 표시 (&G)" +msgid "Auto Perspective" +msgstr "자동 시점" -msgid "Show g-code window in Previce scene" -msgstr "예측 장면에 G코드 창 표시" +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"상단/하단/측면 보기에서 변경할 때 직교와 투시 사이를 자동으로 전환합니다." + +msgid "Show &G-code Window" +msgstr "Gcode 창 표시 (&G)" + +msgid "Show G-code window in Preview scene." +msgstr "예측 장면에 Gcode 창 표시" msgid "Show 3D Navigator" msgstr "3D 내비게이터 표시" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "준비 및 미리보기 장면에서 3D 내비게이터 표시" msgid "Reset Window Layout" @@ -4714,18 +5324,27 @@ msgstr "기본 창 레이아웃으로 재설정" msgid "Show &Labels" msgstr "이름표 보기 (&L)" -msgid "Show object labels in 3D scene" -msgstr "3D 화면에 개체 이름표 표시" +msgid "Show object labels in 3D scene." +msgstr "3D 화면에 객체 이름표 표시" msgid "Show &Overhang" -msgstr "돌출부 보기 (&O)" +msgstr "오버행 보기 (&O)" -msgid "Show object overhang highlight in 3D scene" -msgstr "3D 장면에서 개체 오버행 하이라이트 표시" +msgid "Show object overhang highlight in 3D scene." +msgstr "3D 장면에서 객체 오버행 하이라이트 표시" + +msgid "Show Selected Outline (beta)" +msgstr "선택된 개요 표시(실험적)" + +msgid "Show outline around selected object in 3D scene." +msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시" msgid "Preferences" msgstr "기본 설정" +msgid "View" +msgstr "시점" + msgid "Help" msgstr "도움말" @@ -4736,16 +5355,28 @@ msgid "Pass 1" msgstr "1차 테스트" msgid "Flow rate test - Pass 1" -msgstr "유량 테스트 - 1차" +msgstr "압출량 테스트 - 1차" msgid "Pass 2" msgstr "2차 테스트" msgid "Flow rate test - Pass 2" -msgstr "유량 테스트 - 2차" +msgstr "압출량 테스트 - 2차" + +msgid "YOLO (Recommended)" +msgstr "YOLO (권장)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO 압출량 보정, 0.01 단계" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (완벽주의자 버전)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO 압출량 보정, 0.005 단계" msgid "Flow rate" -msgstr "유량" +msgstr "압출량" msgid "Pressure advance" msgstr "프레셔 어드밴스" @@ -4753,32 +5384,38 @@ msgstr "프레셔 어드밴스" msgid "Retraction test" msgstr "후퇴 테스트" -msgid "Orca Tolerance Test" -msgstr "Orca 공차 테스트" - msgid "Max flowrate" -msgstr "최대 유량" +msgstr "최대 압출량" + +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "더보기..." - msgid "Tutorial" msgstr "설명서" msgid "Calibration help" msgstr "교정 도움말" -msgid "More calibrations" -msgstr "추가 교정" - msgid "&Open G-code" -msgstr "G코드 열기 (&O)" +msgstr "Gcode 열기 (&O)" msgid "Open a G-code file" -msgstr "G코드 파일 열기" +msgstr "Gcode 파일 열기" msgid "Re&load from Disk" msgstr "디스크에서 다시 불러오기 (&l)" @@ -4789,9 +5426,6 @@ msgstr "디스크에서 플레이트 다시 로드" msgid "Export &Toolpaths as OBJ" msgstr "툴 경로를 OBJ로 내보내기 (&T)" -msgid "Export toolpaths as OBJ" -msgstr "툴 경로를 OBJ로 내보내기" - msgid "Open &Slicer" msgstr "&Slicer 열기 (&O)" @@ -4815,16 +5449,19 @@ msgid "&Help" msgstr "도움말 (&H)" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "같은 이름을 가진 파일이 존재합니다: %s, 덮어 쓰겠습니까." +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "같은 이름을 가진 파일이 존재합니다: %s, 덮어 쓰시겠습니까?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "같은 이름을 가진 설정이 존재합니다: %s, 덮어 쓰겠습니까." +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "같은 이름을 가진 설정이 존재합니다: %s, 덮어 쓰시겠습니까?" msgid "Overwrite file" msgstr "파일 덮어쓰기" +msgid "Overwrite config" +msgstr "구성 덮어쓰기" + msgid "Yes to All" msgstr "모두 예" @@ -4872,7 +5509,7 @@ msgid "Filament Settings" msgstr "필라멘트 설정" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4882,7 +5519,7 @@ msgstr "" "다음과 같은 정보가 포함되어 있습니다:\n" "1. 프로세스 사전 설정\n" "2. 필라멘트 사전 설정\n" -"3. 프린터가 사전 설정" +"3. 프린터 사전 설정" msgid "Synchronization" msgstr "동기화" @@ -4908,7 +5545,7 @@ msgstr "프린터가 현재 다운로드 중입니다. 다운로드가 완료된 msgid "Printer camera is malfunctioning." msgstr "프린터 카메라가 오작동합니다." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "문제가 발생했습니다. 프린터 펌웨어를 업데이트하고 다시 시도하세요." msgid "" @@ -4926,7 +5563,7 @@ msgid "Connection Failed. Please check the network and try again" msgstr "연결에 실패했습니다. 네트워크를 확인한 후 다시 시도하세요" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "네트워크를 확인하고 다시 시도해 보세요. 문제가 지속되면 프린터를 다시 시작하" @@ -4935,8 +5572,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "프린터가 로그아웃되어 연결할 수 없습니다." -msgid "Stopped." -msgstr "중지됨." +msgid "Video Stopped." +msgstr "비디오가 중지되었습니다." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN 연결 실패(라이브뷰 시작 실패)" @@ -4973,6 +5610,9 @@ msgstr "정보" msgid "Playing..." msgstr "재생중...." +msgid "Loading..." +msgstr "로딩 중..." + msgid "Year" msgstr "년" @@ -4991,6 +5631,9 @@ msgstr "월별 그룹 파일, 최근 파일 순." msgid "Show all files, recent first." msgstr "모든 파일 표시, 최근 파일 순." +msgid "Timelapse" +msgstr "타임랩스" + msgid "Switch to timelapse files." msgstr "타임랩스 파일로 전환합니다." @@ -5000,7 +5643,8 @@ msgstr "비디오" msgid "Switch to video files." msgstr "비디오 파일로 전환합니다." -msgid "Switch to 3mf model files." +#, fuzzy +msgid "Switch to 3MF model files." msgstr "3mf 모델 파일로 전환." msgid "Delete selected files from printer." @@ -5027,10 +5671,6 @@ msgstr "프린터에서 파일 목록을 다시 로드합니다." msgid "No printers." msgstr "프린터 없음." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "[%d] 연결 실패!" - msgid "Loading file list..." msgstr "파일 목록 로드 중..." @@ -5040,29 +5680,16 @@ msgstr "파일 없음" msgid "Load failed" msgstr "로드 실패" -msgid "Initialize failed (Device connection not ready)!" -msgstr "초기화 실패 (장치 연결 준비 안 됨)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"현재 펌웨어에서는 SD 카드의 파일 검색이 지원되지 않습니다. 프린터 펌웨어를 업" -"데이트하세요." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"초기화에 실패했습니다(저장소를 사용할 수 없습니다. SD 카드를 삽입하세요.)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "LAN 연결 실패 (sdcard를 볼 수 없음)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "LAN 전용 모드에서는 SD 카드의 파일 탐색이 지원되지 않습니다." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "(%s) 초기화 실패!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5080,7 +5707,7 @@ msgstr "프린터에서 '%s' 파일을 삭제하시겠습니까?" msgid "Delete file" msgstr "파일 삭제" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "모델 정보 가져오는 중..." msgid "Failed to fetch model information from printer." @@ -5090,10 +5717,10 @@ msgid "Failed to parse model information." msgstr "모델 정보를 구문 분석하지 못했습니다." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G코드 데이터가 없습니다. Snapmaker Orca에서 슬라이스하고 새 ." +".gcode.3mf 파일에는 Gcode 데이터가 없습니다. Snapmaker Orca에서 슬라이스하고 새 ." "gcode.3mf 파일을 내보내십시오." #, c-format, boost-format @@ -5124,6 +5751,9 @@ msgstr "다운로드 완료" msgid "Downloading %d%%..." msgstr "다운로드 중 %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5131,6 +5761,9 @@ msgstr "" "프린터를 다시 연결하는 중입니다. 작업을 즉시 완료할 수 없습니다. 나중에 다시 " "시도해 주세요." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "파일이 없습니다." @@ -5140,13 +5773,47 @@ msgstr "파일 체크섬 오류입니다. 다시 시도해 주세요." msgid "Not supported on the current printer version." msgstr "현재 프린터 버전에서는 지원되지 않습니다." -msgid "Storage unavailable, insert SD card." -msgstr "저장소를 사용할 수 없습니다. SD 카드를 삽입하세요." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "오류 코드: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "속도:" @@ -5186,11 +5853,84 @@ msgstr "횡축을 중심으로 반전" msgid "Invert Roll axis" msgstr "종축을 중심으로 반전" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "검색" + +msgid "My Device" +msgstr "내 장치" + +msgid "Other Device" +msgstr "다른 장치" + +msgid "Online" +msgstr "온라인" + +msgid "Input access code" +msgstr "액세스 코드 입력" + +msgid "Can't find my devices?" +msgstr "내 장치를 찾을 수 없습니까?" + +msgid "Log out successful." +msgstr "로그아웃에 성공했습니다." + +msgid "Offline" +msgstr "오프라인" + +msgid "Busy" +msgstr "사용중" + +msgid "Modifying the device name" +msgstr "장치 이름 수정" + +msgid "Name is invalid;" +msgstr "이름이 잘못되었습니다;" + +msgid "illegal characters:" +msgstr "잘못된 문자:" + +msgid "illegal suffix:" +msgstr "잘못된 접미사:" + +msgid "The name is not allowed to be empty." +msgstr "이름은 비워 둘 수 없습니다." + +msgid "The name is not allowed to start with space character." +msgstr "이름은 공백으로 시작할 수 없습니다." + +msgid "The name is not allowed to end with space character." +msgstr "이름은 공백으로 끝날 수 없습니다." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "핀 코드로 바인딩" + +msgid "Bind with Access Code" +msgstr "액세스 코드로 바인딩" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "출력 진행률" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "정지" msgid "Layer: N/A" msgstr "레이어: N/A" @@ -5220,8 +5960,8 @@ msgstr "평가" msgid "Camera" msgstr "카메라" -msgid "SD Card" -msgstr "SD 카드" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "카메라 설정" @@ -5238,35 +5978,41 @@ msgstr "프린터 부품" msgid "Print Options" msgstr "출력 옵션" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "조명" -msgid "Aux" -msgstr "보조" - -msgid "Cham" -msgstr "챔버" - msgid "Bed" msgstr "베드" msgid "Debug Info" msgstr "디버그 정보" -msgid "No SD Card" -msgstr "SD 카드 없음" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD 카드 이상" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "출력 취소" -msgid "Are you sure you want to cancel this print?" -msgstr "이 출력을 취소하겠습니까?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "프린터가 다른 출력 작업을 수행 중입니다" + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "다운로드 중..." @@ -5286,17 +6032,16 @@ msgstr "레이어: %s" msgid "Layer: %d/%d" msgstr "레이어: %d/%d" +#, fuzzy msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" "필라멘트를 로드하거나 언로드하기 전에 노즐을 170도 이상으로 가열하세요." -msgid "Still unload" -msgstr "언로드중" - -msgid "Still load" -msgstr "로드중" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "교정하기 전에 AMS 슬롯을 선택하세요" @@ -5323,8 +6068,19 @@ msgstr "스포츠" msgid "Ludicrous" msgstr "루디크러스" -msgid "Can't start this without SD card." -msgstr "SD 카드가 없으면 시작할 수 없습니다." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "출력 사전설정 평가" @@ -5347,13 +6103,10 @@ msgstr "제출" msgid "Please click on the star first." msgstr "먼저 별점을 클릭해주세요." -msgid "InFo" -msgstr "정보" - msgid "Get oss config failed." msgstr "OSS 구성 가져오기에 실패했습니다." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "사진 업로드" msgid "Number of images successfully uploaded" @@ -5368,7 +6121,7 @@ msgstr " 구성 업로드 실패\n" msgid " No corresponding storage bucket\n" msgstr " 해당 스토리지 버킷이 없습니다.\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " 열 수 없습니다\n" msgid "" @@ -5392,7 +6145,7 @@ msgid "obtaining instance_id failed\n" msgstr "instance_id를 가져오지 못했습니다.\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5406,7 +6159,7 @@ msgstr "에러 메시지: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5414,7 +6167,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "일부 이미지를 업로드하지 못했습니다. 평가를 위해 웹페이지로 리디렉션하시겠습" "니까?" @@ -5424,7 +6177,7 @@ msgstr "최대 16개의 이미지를 선택할 수 있습니다." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "긍정적인 평가(별4개 또는 5개)를 제공하려면\n" "이 출력 사전 설정의 성공적인 출력 기록이 하나 이상 필요합니다." @@ -5432,12 +6185,22 @@ msgstr "" msgid "Status" msgstr "상태" +msgctxt "Firmware" msgid "Update" -msgstr "업데이트" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "다시 표시하지 않음" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s 에러" @@ -5465,11 +6228,13 @@ msgstr "%s 정보" msgid "Skip" msgstr "건너뛰기" -msgid "Newer 3mf version" -msgstr "최신 3mf 버전" +#, fuzzy +msgid "Newer 3MF version" +msgstr "최신 3MF 버전" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" "3mf 파일 버전은 베타 버전이며 현재 Snapmaker Orca 버전보다 최신 버전입니다." @@ -5480,12 +6245,14 @@ msgstr "Snapmaker Orca Beta를 사용해 보려면 다음을 클릭하세요" msgid "Download Beta Version" msgstr "베타 버전 다운로드" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "3mf 파일 버전은 현재 Snapmaker Orca 버전보다 최신 버전입니다." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Snapmaker Orca를 업데이트하면 3mf 파일의 모든 기능을 활성화할 수 있습니다." +"Snapmaker Orca를 업데이트하면 3MF 파일의 모든 기능을 활성화할 수 있습니다." msgid "Current Version: " msgstr "현재 버전: " @@ -5493,9 +6260,35 @@ msgstr "현재 버전: " msgid "Latest Version: " msgstr "최신 버전: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "건너뛰기" +msgid "Server Exception" +msgstr "서버 예외" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"서버가 응답할 수 없습니다. 아래 링크를 클릭하여 서버 상태를 확인하세요." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"서버가 장애 상태인 경우 오프라인 출력 또는 로컬 네트워크 출력를 일시적으로 사" +"용할 수 있습니다." + +msgid "How to use LAN only mode" +msgstr "LAN 전용 모드 사용 방법" + +msgid "Don't show this dialog again" +msgstr "이 대화 상자를 다시 표시하지 마세요." + msgid "3D Mouse disconnected." msgstr "3D 마우스가 분리됨." @@ -5547,17 +6340,22 @@ msgstr "하드웨어를 안전하게 제거합니다." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." -msgstr[0] "%1$d 개체에 사용자 정의 지지대가 있습니다." +msgstr[0] "%1$d 객체에 사용자 정의 서포트가 있습니다." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d 개체에 컬러 페인팅이 있습니다." +msgstr[0] "%1$d 객체에 컬러 페인팅이 있습니다." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "%1$d 개체가 잘라낸 개체의 부품으로 로드되었습니다." +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d 객체가 잘라낸 객체의 부품으로 로드되었습니다." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" msgid "ERROR" msgstr "오류" @@ -5580,7 +6378,7 @@ msgstr "오류:" msgid "Warning:" msgstr "경고:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "내보내기 성공." msgid "Model file downloaded." @@ -5598,14 +6396,14 @@ msgstr " 설치하려면 여기를 클릭하세요." msgid "WARNING:" msgstr "경고:" -msgid "Your model needs support ! Please make support material enable." -msgstr "모델에 지지대가 필요합니다! 지지대를 활성화하세요." +msgid "Your model needs support! Please enable support material." +msgstr "모델에 서포트가 필요합니다! 서포트를 활성화하세요." -msgid "Gcode path overlap" -msgstr "G코드 경로 겹침" +msgid "G-code path overlap" +msgstr "Gcode 경로 겹침" msgid "Support painting" -msgstr "지지대 칠하기" +msgstr "서포트 칠하기" msgid "Color painting" msgstr "색 칠하기" @@ -5651,12 +6449,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "하부" -msgid "Enable AI monitoring of printing" -msgstr "출력 AI 모니터링 활성화" - -msgid "Sensitivity of pausing is" -msgstr "일시 정지 감도" - msgid "Enable detection of build plate position" msgstr "빌드 플레이트 위치 감지 활성화" @@ -5667,42 +6459,113 @@ msgstr "" "빌드 플레이트의 현지화 태그가 감지되고 태그가 사전 설정된 범위를 벗어나면 출" "력이 일시 정지됩니다." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "출력 AI 모니터링 활성화" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "노즐 응집 감지" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "첫 레이어 검사" msgid "Auto-recovery from step loss" msgstr "손실 단계부터 자동 복구" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "프롬프트 소리 허용" msgid "Filament Tangle Detect" msgstr "필라멘트 엉킴 감지" -msgid "Nozzle Clumping Detection" -msgstr "노즐 응집 감지" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "노즐에 필라멘트나 기타 이물질이 뭉쳐져 있는지 확인하세요." msgid "Nozzle Type" msgstr "노즐 유형" -msgid "Stainless Steel" -msgstr "스테인레스 스틸" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "경화강" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "스테인레스 스틸" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "전역" msgid "Objects" -msgstr "개체" +msgstr "객체" msgid "Advance" msgstr "전문가 모드" @@ -5711,7 +6574,7 @@ msgid "Compare presets" msgstr "사전 설정 비교" msgid "View all object's settings" -msgstr "모든 개체 설정 보기" +msgstr "모든 객체 설정 보기" msgid "Material settings" msgstr "재료 설정" @@ -5720,10 +6583,10 @@ msgid "Remove current plate (if not last one)" msgstr "현재 플레이트 제거(마지막 플레이트가 아닌 경우)" msgid "Auto orient objects on current plate" -msgstr "현재 플레이트의 개체 자동 방향 지정" +msgstr "현재 플레이트의 객체 자동 방향 지정" msgid "Arrange objects on current plate" -msgstr "현재 플레이트의 개체 정렬" +msgstr "현재 플레이트의 객체 정렬" msgid "Unlock current plate" msgstr "현재 플레이트 잠금 해제" @@ -5731,6 +6594,9 @@ msgstr "현재 플레이트 잠금 해제" msgid "Lock current plate" msgstr "현재 플레이트 잠금" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "현재 번호판 이름 수정" @@ -5740,6 +6606,31 @@ msgstr "플레이트를 앞쪽으로 이동" msgid "Customize current plate" msgstr "사용자 정의 플레이트" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " 플레이트 %1%:" @@ -5768,14 +6659,67 @@ msgstr "추정 시간" msgid "Filament changes" msgstr "필라멘트 변경" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "클릭하여 사전 설정 편집" msgid "Connection" msgstr "연결" -msgid "Bed type" -msgstr "베드 유형" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "버리기 볼륨" @@ -5793,51 +6737,33 @@ msgid "Set filaments to use" msgstr "사용할 필라멘트 설정" msgid "Search plate, object and part." -msgstr "플레이트, 개체 및 부품을 검색합니다." +msgstr "플레이트, 객체 및 부품을 검색합니다." msgid "Pellets" msgstr "펠릿" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"AMS 필라멘트가 없습니다. AMS 정보를 불러오려면 '장치' 페이지에서 프린터를 선" -"택하세요." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "호환되는 필라멘트가 없으며 동기화가 수행되지 않습니다." msgid "Sync filaments with AMS" msgstr "AMS와 필라멘트 동기화" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"AMS와 동기화된 필라멘트는 현재 선택된 모든 필라멘트 사전 설정 및 색상을 삭제" -"합니다. 계속하시겠습니까?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"이미 동기화를 수행했습니다. 변경 사항만 동기화하시겠습니까? 아니면 다시 동기" -"화하시겠습니까?" - -msgid "Sync" -msgstr "동기화" - -msgid "Resync" -msgstr "재 동기화" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "호환되는 필라멘트가 없으며 동기화가 수행되지 않습니다." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"일반 사전 설정에 매핑된 알 수 없는 필라멘트가 있습니다. Snapmaker Orca를 업데이" -"트하거나 Snapmaker Orca를 다시 시작하여 시스템 사전 설정에 대한 업데이트가 있는" -"지 확인하세요." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -5845,15 +6771,15 @@ msgstr "변경 사항을 \"%1%\"에 저장하시겠습니까?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" -"성공적으로 마운트 해제되었습니다. 이제 %s(%s) 장치를 컴퓨터에서 안전하게 제거" -"할 수 있습니다." +"성공적으로 마운트 해제되었습니다. 이제 %s (%s) 장치를 컴퓨터에서 안전하게 제" +"거할 수 있습니다." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "%s(%s) 장치를 꺼내지 못했습니다." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "저장되지 않은 이전 프로젝트가 감지되었습니다. 복원하시겠습니까?" @@ -5885,72 +6811,102 @@ msgstr "" "기존 타임랩스 사진을 사용하면 표면 결함이 발생할 수 있습니다. 유연 모드로 변" "경하는 것이 좋습니다." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "사이드바 확장" msgid "Collapse sidebar" msgstr "사이드바 접기" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "파일 로드 중: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "이 3mf는 Snapmaker Orca에서 지원되지 않습니다. 형상 데이터만 불러옵니다." -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "3mf 불러오기" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" "3mf의 버전 %s이(가) %s의 버전 %s보다 높습니다. 다음 키를 인식할 수 없습니다:" msgid "You'd better upgrade your software.\n" msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" "3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십시" "오." -msgid "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "이 3mf는 이전 Snapmaker Orca에서 생성되었으며, 형상 데이터만 로드합니다." + + +msgid "Invalid values found in the 3MF:" msgstr "3mf에서 잘못된 값이 발견됨:" msgid "Please correct them in the param tabs" msgstr "매개변수 탭에서 수정하세요" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"3mf에는 필라멘트 또는 프린터 사전 설정에 다음과 같은 수정된 G코드가 있습니다:" +"3mf에는 필라멘트 또는 프린터 사전 설정에 다음과 같은 수정된 Gcode가 있습니다:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" -msgstr "이 수정된 G코드가 손상을 방지하기 위해 안전한지 확인하세요.장치!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "이 수정된 Gcode가 손상을 방지하기 위해 안전한지 확인하세요.장치!" -msgid "Modified G-codes" -msgstr "수정된 G코드" +msgid "Modified G-code" +msgstr "수정된 Gcode" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "3mf에는 다음과 같은 맞춤형 필라멘트 또는 프린터 사전 설정이 있습니다:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"이러한 사전 설정 내의 G코드가 기계 손상을 방지할 수 있도록 안전한지 확인하세" +"이러한 사전 설정 내의 Gcode가 기계 손상을 방지할 수 있도록 안전한지 확인하세" "요!" msgid "Customized Preset" msgstr "사용자 정의 프리셋" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "단계 파일 내의 구성 요소 이름이 UTF8 형식이 아닙니다!" msgid "The name may show garbage characters!" @@ -5961,10 +6917,10 @@ msgstr "선택 기억하기." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "파일 \"%1%\"을(를) 로드하지 못했습니다. 잘못된 구성이 발견되었습니다." +msgstr "파일 \"%1%\"를 로드하지 못했습니다. 잘못된 구성이 발견되었습니다." msgid "Objects with zero volume removed" -msgstr "부피가 0인 개체가 제거됨" +msgstr "부피가 0인 객체가 제거됨" msgid "The volume of the object is zero" msgstr "물체의 부피는 0입니다" @@ -5974,45 +6930,50 @@ msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" -"%s 파일의 개체가 너무 작습니다. 단위가 미터나 인치일 수 있습니다.\n" -" 밀리미터 단위로 확장하시겠습니까?" +"%s 파일의 객체가 너무 작습니다. 단위가 미터나 인치일 수 있습니다.\n" +" mm 단위로 확장하시겠습니까?" msgid "Object too small" -msgstr "개체가 너무 작음" +msgstr "객체가 너무 작음" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" -"이 파일에는 여러 높이에 배치된 여러 개체가 포함되어 있습니다.\n" -"여러 개체로 간주하는 대신\n" -"파일을 여러 부품이 있는 단일 개체로 로드하시겠습니까?" +"이 파일에는 여러 높이에 배치된 여러 객체가 포함되어 있습니다.\n" +"여러 객체로 간주하는 대신\n" +"파일을 여러 부품이 있는 단일 객체로 로드하시겠습니까?" msgid "Multi-part object detected" -msgstr "여러 부품으로 구성된 개체 감지됨" +msgstr "여러 부품으로 구성된 객체 감지됨" msgid "Load these files as a single object with multiple parts?\n" -msgstr "이 파일을 여러 부품이 있는 단일 개체로 로드하시겠습니까?\n" +msgstr "이 파일을 여러 부품이 있는 단일 객체로 로드하시겠습니까?\n" msgid "Object with multiple parts was detected" -msgstr "여러 부품으로 구성된 개체가 감지되었습니다" +msgstr "여러 부품으로 구성된 객체가 감지되었습니다" + +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" msgid "The file does not contain any geometry data." msgstr "파일에 형상 데이터가 포함되어 있지 않습니다." msgid "" -"Your object appears to be too large. It will be scaled down to fit the heat " -"bed automatically." -msgstr "" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" +msgstr "객체가 너무 큽니다. 자동으로 고온 베드에 맞게 크기를 줄이시겠습니까?" msgid "Object too large" -msgstr "개체가 너무 큼" - -msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" -msgstr "개체가 너무 큽니다. 자동으로 고온 베드에 맞게 크기를 줄이시겠습니까?" +msgstr "객체가 너무 큼" msgid "Export STL file:" msgstr "STL 파일 내보내기:" @@ -6031,26 +6992,26 @@ msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" -"파일 %s이(가) 이미 존재합니다.\n" +"파일 %s가 이미 존재합니다.\n" "파일을 바꾸시겠습니까?" msgid "Confirm Save As" msgstr "다른 이름으로 저장 확인" msgid "Delete object which is a part of cut object" -msgstr "잘라낸 개체의 일부인 개체 삭제" +msgstr "잘라낸 객체의 일부인 객체 삭제" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"잘라낸 개체의 일부인 개체를 삭제하려고 합니다.\n" -"이 작업을 수행하면 잘라낸 개체간 연결이 끊어집니다.\n" +"잘라낸 객체의 일부인 객체를 삭제하려고 합니다.\n" +"이 작업을 수행하면 잘라낸 객체간 연결이 끊어집니다.\n" "그 이후 모델의 일관성은 보장되지 않습니다." msgid "The selected object couldn't be split." -msgstr "선택한 개체를 분할할 수 없습니다." +msgstr "선택한 객체를 분할할 수 없습니다." msgid "Another export job is running." msgstr "다른 내보내기 작업이 실행 중입니다." @@ -6070,6 +7031,34 @@ msgstr "새 파일 선택" msgid "File for the replace wasn't selected" msgstr "대체할 파일이 선택되지 않았습니다" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "파일을 선택하세요" @@ -6115,10 +7104,21 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "미리 보기 전용 모드:\n" -"불러온 파일에 G코드만 포함되어 있습니다. 준비 페이지에 들어갈 수 없습니다" +"불러온 파일에 Gcode만 포함되어 있습니다. 준비 페이지에 들어갈 수 없습니다." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "수정된 사전 설정을 새 프로젝트에 유지하거나 삭제할 수 있습니다" @@ -6144,13 +7144,13 @@ msgstr "프로젝트 저장" msgid "Importing Model" msgstr "모델 가져오는 중" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "3mf 파일 준비..." msgid "Download failed, unknown file format." msgstr "다운로드에 실패했습니다. 파일 형식을 알 수 없습니다." -msgid "downloading project ..." +msgid "downloading project..." msgstr "프로젝트 다운로드 중 ..." msgid "Download failed, File size exception." @@ -6167,17 +7167,27 @@ msgstr "" "Snapmaker Orca로 가져오는 데 실패했습니다. 파일을 다운로드하여 수동으로 가져오세" "요." +msgid "INFO:" +msgstr "정보:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "보정을 위해 가속도가 제공되지 않습니다. 기본 가속도 값 사용 " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "보정을 위한 속도가 제공되지 않습니다. 기본 최적 속도 사용 " + msgid "Import SLA archive" msgstr "SLA 압축파일 가져오기" msgid "The selected file" msgstr "선택한 파일" -msgid "does not contain valid gcode." -msgstr "유효한 G코드를 포함하지 않습니다." +msgid "does not contain valid G-code." +msgstr "유효한 Gcode를 포함하지 않습니다." msgid "Error occurs while loading G-code file" -msgstr "G코드 파일을 로드하는 중 오류가 발생했습니다" +msgstr "Gcode 파일을 로드하는 중 오류가 발생했습니다" #. TRN %1% is archive path #, boost-format @@ -6207,19 +7217,19 @@ msgid "Import geometry only" msgstr "형상만 가져오기" msgid "Only one G-code file can be opened at the same time." -msgstr "동시에 하나의 G코드 파일만 열 수 있습니다." +msgstr "동시에 하나의 Gcode 파일만 열 수 있습니다." msgid "G-code loading" -msgstr "G코드 불러오는 중" +msgstr "Gcode 불러오는 중" -msgid "G-code files can not be loaded with models together!" -msgstr "G코드 파일은 모델과 함께 로드할 수 없습니다!" +msgid "G-code files cannot be loaded with models together!" +msgstr "Gcode 파일은 모델과 함께 로드할 수 없습니다!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "미리보기 모드에서는 모델을 추가할 수 없습니다!" msgid "All objects will be removed, continue?" -msgstr "모든 개체가 제거됩니다. 계속하시겠습니까?" +msgstr "모든 객체가 제거됩니다. 계속하시겠습니까?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" @@ -6230,10 +7240,10 @@ msgid "Number of copies:" msgstr "복제본 수:" msgid "Copies of the selected object" -msgstr "선택한 개체의 복제본" +msgstr "선택한 객체의 복제본" msgid "Save G-code file as:" -msgstr "G코드 파일을 다음으로 저장:" +msgstr "Gcode 파일을 다음으로 저장:" msgid "Save SLA file as:" msgstr "SLA 파일을 다음으로 저장:" @@ -6254,12 +7264,18 @@ msgid "" msgstr "" "%s 파일이 프린터의 저장 공간으로 전송되었으며 프린터에서 볼 수 있습니다." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"모델 메쉬에 대해 부울 연산을 수행할 수 없습니다. 긍정적인 부분만 유지됩니다. " -"메쉬를 수정하고 재시도해 볼 수 있습니다." +"모델 메시에 대해 부울 연산을 수행할 수 없습니다. 긍정적인 부분만 유지됩니다. " +"메시를 수정하고 재시도해 볼 수 있습니다." #, boost-format msgid "Reason: part \"%1%\" is empty." @@ -6281,18 +7297,7 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"모델 메쉬에 부울 연산을 수행할 수 없습니다. 오직 양수 부품만 내보내집니다." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"로컬 경로가 있는 원본 SVG를 3MF 파일에 저장하시겠습니까?\n" -"'아니요'를 누르면 프로젝트의 모든 SVG를 더 이상 편집할 수 없습니다." - -msgid "Private protection" -msgstr "개인정보 보호" +"모델 메시에 부울 연산을 수행할 수 없습니다. 오직 양수 부품만 내보내집니다." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "프린터가 준비됐나요? 출력 시트가 제자리에 있고 비어 있고 깨끗합니까?" @@ -6300,27 +7305,55 @@ msgstr "프린터가 준비됐나요? 출력 시트가 제자리에 있고 비 msgid "Upload and Print" msgstr "업로드 및 출력" +msgid "Abnormal print file data. Please slice again" +msgstr "비정상적인 출력 파일 데이터입니다. 다시 슬라이스하세요" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" -"개체별 출력:\n" +"객체별 출력:\n" "출력 시 충돌을 방지하기 위해 자동 정렬을 사용할 것을 제안합니다." msgid "Send G-code" -msgstr "G코드 전송" +msgstr "Gcode 전송" msgid "Send to printer" msgstr "프린터로 전송" msgid "Custom supports and color painting were removed before repairing." -msgstr "수리 전 사용자 정의 지지대와 컬러 페인트가 제거되었습니다." +msgstr "수리 전 사용자 정의 서포트와 컬러 페인트가 제거되었습니다." msgid "Optimize Rotation" msgstr "회전 최적화" -msgid "Invalid number" -msgstr "잘못된 번호" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "플레이트 설정" @@ -6331,7 +7364,7 @@ msgstr "현재 선택된 부품 수: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "현재 선택된 개체 수: %1%\n" +msgstr "현재 선택된 객체 수: %1%\n" #, boost-format msgid "Part name: %1%\n" @@ -6339,7 +7372,7 @@ msgstr "부품 이름: %1%\n" #, boost-format msgid "Object name: %1%\n" -msgstr "개체 이름: %1%\n" +msgstr "객체 이름: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" @@ -6361,9 +7394,6 @@ msgstr "부피: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "삼각형: %1%\n" -msgid "Tips:" -msgstr "팁:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6373,12 +7403,38 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"%d: %s플레이트는 %s(%s)필라멘트를 출력하는데 사용하지 않는 것이 좋습니다. 이 " +"출력을 계속하려면 이 필라멘트의 베드 온도를 0이 아닌 값으로 설정하세요." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"% d: %s플레이트는 %s(%s)필라멘트를 출력하는데 사용하지 않는 것이 좋습니다. " -"이 출력을 계속하려면 이 필라멘트의 베드 온도를 0이 아닌 값으로 설정하세요." msgid "Switching the language requires application restart.\n" msgstr "언어를 전환하려면 애플리케이션을 다시 시작해야 합니다.\n" @@ -6389,21 +7445,57 @@ msgstr "계속하시겠습니까?" msgid "Language selection" msgstr "언어 선택" +msgid "Switching application language while some presets are modified." +msgstr "일부 사전 설정이 수정되는 동안 응용 프로그램 언어를 전환합니다." + msgid "Changing application language" msgstr "응용 프로그램 언어 변경" +msgid "Asia-Pacific" +msgstr "아시아 태평양" + +msgid "China" +msgstr "중국" + +msgid "Europe" +msgstr "유럽" + +msgid "North America" +msgstr "북아메리카" + +msgid "Others" +msgstr "기타" + msgid "Changing the region will log out your account.\n" msgstr "지역을 변경하면 계정에서 로그아웃됩니다.\n" msgid "Region selection" msgstr "지역 선택" -msgid "Second" -msgstr "초" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "백업 기간(초)입니다." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "탐색" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "다운로드 폴더 선택" @@ -6422,42 +7514,8 @@ msgstr "현재 인스턴스" msgid "Current Instance Path: " msgstr "현재 인스턴스 경로: " -msgid "General Settings" -msgstr "일반 설정" - -msgid "Asia-Pacific" -msgstr "아시아 태평양" - -msgid "China" -msgstr "중국" - -msgid "Europe" -msgstr "유럽" - -msgid "North America" -msgstr "북아메리카" - -msgid "Others" -msgstr "기타" - -msgid "Login Region" -msgstr "로그인 지역" - -msgid "Stealth Mode" -msgstr "스텔스 모드" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" -"이 기능은 뱀부의 클라우드 서비스로의 데이터 전송을 중지합니다. BBL 머신을 사" -"용하지 않거나 LAN 모드만 사용하는 사용자는 이 기능을 안전하게 켤 수 있습니다." - -msgid "Enable network plugin" -msgstr "네트워크 플러그인 사용" - -msgid "Check for stable updates only" -msgstr "안정적인 업데이트만 확인" +msgid "General" +msgstr "일반" msgid "Metric" msgstr "미터법" @@ -6468,6 +7526,18 @@ msgstr "야드파운드법" msgid "Units" msgstr "단위" +msgid "Home" +msgstr "홈" + +msgid "Default page" +msgstr "기본 페이지" + +msgid "Set the page opened on startup." +msgstr "시작 시 열리는 페이지를 설정합니다." + +msgid "Enable dark mode" +msgstr "다크 모드 사용" + msgid "Allow only one Snapmaker Orca instance" msgstr "Snapmaker Orca 인스턴스를 하나만 허용" @@ -6488,14 +7558,107 @@ msgstr "" "이 기능을 활성화하면 Snapmaker Orca를 시작하고 동일한 Snapmaker Orca의 다른 인스턴스" "가 이미 실행 중일 때 해당 인스턴스가 대신 다시 활성화됩니다." -msgid "Home" -msgstr "홈" +msgid "Show splash screen" +msgstr "시작 화면 표시" -msgid "Default Page" -msgstr "기본 페이지" +msgid "Show the splash screen during startup." +msgstr "시작 화면을 표시합니다." -msgid "Set the page opened on startup." -msgstr "시작 시 열리는 페이지를 설정합니다." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "모두 로드" + +msgid "Ask When Relevant" +msgstr "관련성 있는 경우 질문" + +msgid "Always Ask" +msgstr "항상 물어보세요" + +msgid "Load Geometry Only" +msgstr "형상만 로드" + +msgid "Load behaviour" +msgstr "행동 로드" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr ".3mf를 열 때 프린터/필라멘트/프로세스 설정이 로드되어야 합니까?" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "수정된 Gcode로 3MF를 로드할 때 경고 없음" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "자동 백업" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "간헐적인 충돌로부터 복원하기 위해 주기적으로 프로젝트를 백업하세요." + +msgid "Preset" +msgstr "사전 설정" + +msgid "Remember printer configuration" +msgstr "프린터 구성 기억" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"활성화하면 Orca는 각 프린터의 필라멘트/프로세스 구성을 자동으로 기억하고 전환" +"합니다." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "다중 장치 관리" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"활성화하면 여러 장치에 동시에 작업을 보내고 여러 장치를 관리할 수 있습니다." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "모두" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "복제 후 플레이트 자동 정렬" msgid "Touchpad" msgstr "터치패드" @@ -6512,6 +7675,12 @@ msgstr "" "기본값: 회전의 경우 LMB+이동, 패닝의 경우 RMB/MMB+이동.\n" "터치패드: 회전하려면 Alt+이동, 패닝하려면 Shift+이동." +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" msgstr "마우스 위치로 확대" @@ -6528,101 +7697,113 @@ msgstr "" "활성화된 경우 자유로운 카메라 앵글을 사용합니다. 활성화되지 않은 경우 제한된 " "카메라 앵글을 사용합니다." +msgid "Swap pan and rotate mouse buttons" +msgstr "팬 및 회전 마우스 버튼 바꾸기" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"이 기능을 활성화하면 왼쪽 마우스 버튼과 오른쪽 마우스 버튼의 팬 및 회전 기능" +"이 바뀝니다." + msgid "Reverse mouse zoom" msgstr "역방향 마우스 줌" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "활성화되면 마우스 휠을 사용하여 확대/축소 방향을 반대로 바꿉니다." -msgid "Show splash screen" -msgstr "스플래시 화면 표시" - -msgid "Show the splash screen during startup." -msgstr "시작하는 동안 스플래시 화면을 표시합니다." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "시작 후 \"오늘의 팁\" 알림 표시" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "활성화하면 시작 시 유용한 힌트가 표시됩니다." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "플러시 볼륨: 색상이 변경될 때마다 자동 계산됩니다." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "활성화하면 색상이 변경될 때마다 자동 계산됩니다." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "플러싱량: 필라멘트가 교체될 때마다 자동 계산됩니다." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "활성화하면 필라멘트가 교체될 때마다 자동 계산됩니다" - -msgid "Remember printer configuration" -msgstr "프린터 구성 기억" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +msgid "Clear my choice on..." msgstr "" -"활성화하면 Orca는 각 프린터의 필라멘트/프로세스 구성을 자동으로 기억하고 전환" -"합니다." -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "다중 장치 관리 (Orca를 다시 시작한 후 적용됨)." - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." +msgid "Unsaved projects" msgstr "" -"활성화하면 여러 장치에 동시에 작업을 보내고 여러 장치를 관리할 수 있습니다." -msgid "Auto arrange plate after cloning" -msgstr "복제 후 플레이트 자동 정렬" +msgid "Clear my choice on the unsaved projects." +msgstr "저장되지 않은 프로젝트에서 내 선택을 지웁니다." -msgid "Auto arrange plate after object cloning" -msgstr "개체를 복제한 후 플레이트를 자동으로 정렬합니다" - -msgid "Network" -msgstr "네트워크" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "사용자 사전 설정 자동 동기화(프린터/필라멘트/프로세스)" - -msgid "User Sync" -msgstr "사용자 동기화" - -msgid "Update built-in Presets automatically." -msgstr "기본 제공 사전 설정을 자동으로 업데이트합니다." - -msgid "System Sync" -msgstr "시스템 동기화" +msgid "Unsaved presets" +msgstr "" msgid "Clear my choice on the unsaved presets." msgstr "저장되지 않은 사전 설정에서 선택을 취소합니다." +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "로그인 지역" + +msgid "Stealth mode" +msgstr "스텔스 모드" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"이 기능은 뱀부의 클라우드 서비스로의 데이터 전송을 중지합니다. BBL 머신을 사" +"용하지 않거나 LAN 모드만 사용하는 사용자는 이 기능을 안전하게 켤 수 있습니다." + +msgid "Network test" +msgstr "네트워크 테스트" + +msgid "Test" +msgstr "테스트" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "안정적인 업데이트만 확인" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "사용자 사전 설정 자동 동기화(프린터/필라멘트/프로세스)" + +msgid "Update built-in Presets automatically." +msgstr "기본 제공 사전 설정을 자동으로 업데이트합니다." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "네트워크 플러그인 사용" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + msgid "Associate files to Snapmaker Orca" msgstr "파일을 Snapmaker Orca에 연결" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr ".3mf 파일을 Snapmaker Orca에 연결" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "활성화된 경우 Snapmaker Orca를 기본 응용 프로그램으로 설정하여 .3mf 파일을 엽니다" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr ".stl 파일을 Snapmaker Orca에 연결" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "활성화된 경우 Snapmaker Orca를 기본 응용 프로그램으로 설정하여 .stl 파일을 엽니다" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr ".step/.stp 파일을 Snapmaker Orca에 연결" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "활성화된 경우 Snapmaker Orca를 기본 응용 프로그램으로 설정하여 .step 파일을 엽니" "다" @@ -6630,42 +7811,8 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "Snapmaker Orca에 웹 링크 연결" -msgid "Associate URLs to Snapmaker Orca" -msgstr "Snapmaker Orca에 URL 연결" - -msgid "Maximum recent projects" -msgstr "최근 프로젝트 최대 표시" - -msgid "Maximum count of recent projects" -msgstr "최근 프로젝트의 최대 표시 수" - -msgid "Clear my choice on the unsaved projects." -msgstr "저장되지 않은 프로젝트에서 내 선택을 지웁니다." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "수정된 G코드로 3MF를 로드할 때 경고 없음" - -msgid "Auto-Backup" -msgstr "자동 백업" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "간헐적인 충돌로부터 복원하기 위해 주기적으로 프로젝트를 백업하세요." - -msgid "every" -msgstr "매" - -msgid "The peroid of backup in seconds." -msgstr "백업 기간(초)입니다." - -msgid "Downloads" -msgstr "다운로드" - -msgid "Dark Mode" -msgstr "다크 모드" - -msgid "Enable Dark mode" -msgstr "다크 모드 사용" +msgid "Developer" +msgstr "" msgid "Develop mode" msgstr "개발자 모드" @@ -6673,11 +7820,42 @@ msgstr "개발자 모드" msgid "Skip AMS blacklist check" msgstr "AMS 블랙리스트 확인 건너뛰기" -msgid "Home page and daily tips" -msgstr "홈페이지 및 데일리 팁" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "시작 시 홈페이지 표시" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "로그 수준" + +msgid "fatal" +msgstr "치명적" + +msgid "error" +msgstr "오류" + +msgid "warning" +msgstr "경고" + +msgid "debug" +msgstr "디버그" + +msgid "trace" +msgstr "추적" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "동기화 설정" @@ -6718,24 +7896,6 @@ msgstr "SSL(FTP) 활성화" msgid "Internal developer mode" msgstr "내부 개발자 모드" -msgid "Log Level" -msgstr "로그 수준" - -msgid "fatal" -msgstr "치명적" - -msgid "error" -msgstr "오류" - -msgid "warning" -msgstr "경고" - -msgid "debug" -msgstr "디버그" - -msgid "trace" -msgstr "추적" - msgid "Host Setting" msgstr "호스트 설정" @@ -6755,12 +7915,12 @@ msgid "debug save button" msgstr "디버그 저장 버튼" msgid "save debug settings" -msgstr "디버그 세팅 저장" +msgstr "디버그 설정 저장" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "디버그 설정이 성공적으로 저장되었습니다!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "클라우드 환경 전환, 다시 로그인해주세요!" msgid "System presets" @@ -6772,14 +7932,20 @@ msgstr "사용자 사전 설정" msgid "Incompatible presets" msgstr "호환되지 않는 사전 설정" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS 필라멘트" -msgid "Click to pick filament color" -msgstr "필라멘트 색상 선택" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "필라멘트 색상을 선택해 주세요" +msgid "Click to select filament color" +msgstr "필라멘트 색상 선택" msgid "Add/Remove presets" msgstr "사전 설정 추가/제거" @@ -6790,20 +7956,35 @@ msgstr "사전 설정 편집" msgid "Project-inside presets" msgstr "프로젝트 내부 사전 설정" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "필라멘트 추가/제거" msgid "Add/Remove materials" msgstr "재료 추가/제거" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "프린터 선택/제거(시스템 사전 설정)" msgid "Create printer" msgstr "프린터 생성" +msgid "Empty" +msgstr "비어 있음" + +msgid "Incompatible" +msgstr "호환되지 않음" + msgid "The selected preset is null!" -msgstr "선택한 사전 설정의 값이 존재하지 않습니다!(null)" +msgstr "선택한 사전 설정의 값이 존재하지 않습니다!" msgid "End" msgstr "끝" @@ -6820,6 +8001,12 @@ msgstr "레이어 값(>= 2)을 입력하세요." msgid "Plate name" msgstr "플레이트 이름" +msgid "Same as Global Plate Type" +msgstr "글로벌 플레이트 타입과 동일" + +msgid "Bed type" +msgstr "베드 유형" + msgid "Same as Global Print Sequence" msgstr "전역 출력 순서와 동일" @@ -6838,9 +8025,6 @@ msgstr "나선형 꽃병 모드" msgid "First layer filament sequence" msgstr "첫 번째 레이어 필라멘트 순서" -msgid "Same as Global Plate Type" -msgstr "글로벌 플레이트 타입과 동일" - msgid "Same as Global Bed Type" msgstr "글로벌 베드유형과 동일" @@ -6848,7 +8032,7 @@ msgid "By Layer" msgstr "레이어별" msgid "By Object" -msgstr "개체별" +msgstr "객체별" msgid "Accept" msgstr "수락" @@ -6859,28 +8043,28 @@ msgstr "로그 아웃" msgid "Slice all plate to obtain time and filament estimation" msgstr "시간 및 필라멘트 추정치를 얻기 위해 모든 플레이트를 슬라이스합니다" -msgid "Packing project data into 3mf file" -msgstr "프로젝트 데이터를 3mf 파일로 압축" +msgid "Packing project data into 3MF file" +msgstr "프로젝트 데이터를 3MF 파일로 압축" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "3mf 업로드 중" msgid "Jump to model publish web page" msgstr "모델 게시 웹 페이지로 이동" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "참고: 준비하는 데 몇 분 정도 걸릴 수 있습니다. 조금만 기다려 주십시오." msgid "Publish" msgstr "게시" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "게시가 취소되었습니다" msgid "Slicing Plate 1" msgstr "플레이트 1 슬라이싱" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "데이터를 3mf로 압축 중" msgid "Jump to webpage" @@ -6899,7 +8083,7 @@ msgstr "프로젝트 내부 사전 설정" msgid "Name is unavailable." msgstr "이름을 사용할 수 없습니다." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "시스템 사전 설정은 덮어쓸 수 없습니다" #, boost-format @@ -6907,10 +8091,12 @@ msgid "Preset \"%1%\" already exists." msgstr "%1% 사전 설정이 이미 있습니다." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "%1% 사전 설정이 이미 있으며 현재 프린터와 호환되지 않습니다." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "저장 작업이 이 사전 설정을 대체합니다" msgid "The name cannot be the same as a preset alias name." @@ -6946,33 +8132,6 @@ msgstr "\"%1%\"로 단순 전환" msgid "Task canceled" msgstr "작업이 취소됨" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "검색" - -msgid "My Device" -msgstr "내 장치" - -msgid "Other Device" -msgstr "다른 장치" - -msgid "Online" -msgstr "온라인" - -msgid "Input access code" -msgstr "액세스 코드 입력" - -msgid "Can't find my devices?" -msgstr "내 장치를 찾을 수 없습니까?" - -msgid "Log out successful." -msgstr "로그아웃에 성공했습니다." - -msgid "Busy" -msgstr "사용중" - msgid "Bambu Cool Plate" msgstr "뱀부 쿨 플레이트" @@ -6991,14 +8150,53 @@ msgstr "고온 플레이트" msgid "Bambu Textured PEI Plate" msgstr "뱀부 텍스처 PEI 플레이트" -msgid "Send print job to" -msgstr "출력 작업 보내기" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "동적 유량 교정" +msgstr "동적 압출량 교정" -msgid "Click here if you can't connect to the printer" -msgstr "프린터에 연결할 수 없는 경우 여기를 클릭하세요" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "전송 완료" @@ -7006,56 +8204,15 @@ msgstr "전송 완료" msgid "Error code" msgstr "오류 코드" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "로그인 계정이 없으며 LAN 모드의 프린터만 표시됩니다" - -msgid "Connecting to server" -msgstr "서버에 연결 중" - -msgid "Synchronizing device information" -msgstr "장치 정보 동기화 중" - -msgid "Synchronizing device information time out" -msgstr "장치 정보 동기화 시간 초과" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "프린터가 펌웨어를 업데이트하는 동안 출력 작업을 보낼 수 없습니다" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "프린터가 명령을 실행하고 있습니다. 종료 후 출력을 다시 시작하세요" - -msgid "The printer is busy on other print job" -msgstr "프린터가 다른 출력 작업을 수행 중입니다" +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"필라멘트 %s이(가) AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린" -"터 펌웨어를 업데이트하세요." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"필라멘트가 AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린터 펌웨어" -"를 업데이트하세요." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"AMS 슬롯 매핑에 대한 필라멘트가 설정되었습니다. 위의 필라멘트를 클릭하여 매" -"핑 AMS 슬롯을 변경할 수 있습니다" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"출력 작업을 보내기 전에 위의 각 필라멘트를 클릭하여 매핑 AMS 슬롯을 지정하세" -"요" #, c-format, boost-format msgid "" @@ -7072,35 +8229,12 @@ msgstr "" "필라멘트가 AMS 슬롯의 필라멘트와 일치하지 않습니다. AMS 슬롯 할당을 지원하려" "면 프린터 펌웨어를 업데이트하세요." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "프린터 펌웨어는 필라멘트 => AMS 슬롯의 순차 매핑만 지원합니다." - -msgid "An SD card needs to be inserted before printing." -msgstr "출력하기 전에 SD 카드를 삽입해야 합니다." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"선택한 프린터(%s)는 슬라이서(%s)에서 선택한 프린터 프로필과 호환되지 않습니" -"다." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "타임랩스를 녹화하려면 SD 카드를 삽입해야 합니다." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "펌웨어를 업데이트해야 하는 프린터로 출력 작업을 보낼 수 없습니다." - -msgid "Cannot send the print job for empty plate" -msgstr "빈 플레이트에 대한 출력 작업을 보낼 수 없습니다" - -msgid "This printer does not support printing all plates" -msgstr "이 프린터는 모든 플레이트 출력을 지원하지 않습니다" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7110,22 +8244,29 @@ msgstr "" "습니다." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"출력 순서가 \"개체별\"로 설정되어 있으므로 시간 경과는 지원되지 않습니다." msgid "Errors" msgstr "오류" -msgid "Please check the following:" -msgstr "다음을 확인하세요:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"G코드를 생성할 때 선택한 프린터 유형이 현재 선택한 프린터와 일치하지 않습니" +"Gcode를 생성할 때 선택한 프린터 유형이 현재 선택한 프린터와 일치하지 않습니" "다. 슬라이싱에 동일한 프린터 유형을 사용하는 것이 좋습니다." msgid "" @@ -7136,27 +8277,8 @@ msgstr "" "AMS 매핑에 알 수 없는 필라멘트가 있습니다. 필요한 필라멘트인지 확인해주세요. " "정상이면 \"확인\"을 눌러 출력을 시작하세요." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "미리 설정된 노즐: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "기억된 노즐: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"슬라이스 파일의 노즐 직경이 기억된 노즐과 일치하지 않습니다. 최근에 노즐을 변" -"경한 경우 장치 > 프린터 부품으로 이동하여 설정을 변경하세요." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "고온 재료(%s 재료)를 %s로 출력하면 노즐이 손상될 수 있습니다" +msgid "Please check the following:" +msgstr "다음을 확인하세요:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "위의 오류를 수정하십시오. 그렇지 않으면 출력를 계속할 수 없습니다." @@ -7166,27 +8288,203 @@ msgid "" msgstr "그래도 출력을 계속하려면 확인 버튼을 클릭하세요." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "프린터에 연결 중입니다. 연결 진행 중에는 취소할 수 없습니다." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"사용상의 주의! 텍스처 PEI 플레이트의 유량 교정은 표면이 분산되어 실패할 수 있" -"습니다." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "마이크로 라이다를 사용한 자동 유량 교정" +msgid "Preparing print job" +msgstr "출력 작업 준비 중" -msgid "Modifying the device name" -msgstr "장치 이름 수정" +msgid "The name length exceeds the limit." +msgstr "이름 길이가 제한을 초과합니다." -msgid "Bind with Pin Code" -msgstr "핀 코드로 바인딩" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "프린터 SD 카드로 보내기" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "프린터에 연결할 수 없는 경우 여기를 클릭하세요" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "로그인 계정이 없으며 LAN 모드의 프린터만 표시됩니다" + +msgid "Connecting to server..." +msgstr "서버에 연결 중" + +msgid "Synchronizing device information..." +msgstr "장치 정보 동기화 중" + +msgid "Synchronizing device information timed out." +msgstr "장치 정보 동기화 시간 초과" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "프린터가 펌웨어를 업데이트하는 동안 출력 작업을 보낼 수 없습니다" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "프린터가 명령을 실행하고 있습니다. 종료 후 출력을 다시 시작하세요" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "펌웨어를 업데이트해야 하는 프린터로 출력 작업을 보낼 수 없습니다." + +msgid "Cannot send a print job for an empty plate." +msgstr "빈 플레이트에 대한 출력 작업을 보낼 수 없습니다" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "이 프린터는 모든 플레이트 출력을 지원하지 않습니다" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "업그레이드가 진행 중일 때 출력 작업을 보낼 수 없습니다" @@ -7194,14 +8492,14 @@ msgstr "업그레이드가 진행 중일 때 출력 작업을 보낼 수 없습 msgid "The selected printer is incompatible with the chosen printer presets." msgstr "선택한 프린터가 선택한 프린터 사전 설정과 호환되지 않습니다." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "프린터 SD 카드로 보내기 전에 SD 카드를 삽입해야 합니다." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "프린터는 Snapmaker Orca와 동일한 네트워크에 있어야 합니다." -msgid "The printer does not support sending to printer SD card." -msgstr "프린터는 프린터 SD 카드로의 전송을 지원하지 않습니다." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "슬라이스 완료." @@ -7222,7 +8520,7 @@ msgid "Get ticket from device timeout" msgstr "기기에서 티켓 가져오는데 시간 초과" msgid "Get ticket from server timeout" -msgstr "서버에서 티켓 가져오는데 시간 초과" +msgstr "서버에서 티켓 가져오기 시간 초과" msgid "Failed to post ticket to server" msgstr "서버에 티켓게시 실패" @@ -7261,23 +8559,23 @@ msgstr "로그인 실패. 핀 코드를 확인해주세요." msgid "Log in printer" msgstr "프린터 로그인" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "현재 계정으로 이 프린터에 로그인하시겠습니까?" msgid "Check the reason" msgstr "이유 확인" msgid "Read and accept" -msgstr "읽고 수락" +msgstr "읽고 동의하기" msgid "Terms and Conditions" msgstr "이용약관" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "뱀부랩 기기를 구매해 주셔서 감사합니다. 뱀부랩 기기를 사용하기 전에 이용약관" @@ -7306,11 +8604,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "3D 프린팅 커뮤니티에서는 서로의 성공과 실패로 부터 학습하여 각자의 슬라이싱 " "매개변수와 설정을 조정합니다. %s는 이와 동일한 원칙을 따르며 머신 러닝을 사용" @@ -7357,7 +8655,7 @@ msgid "Click to reset all settings to the last saved preset." msgstr "모든 설정을 마지막으로 저장한 사전 설정으로 되돌립니다." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "유연모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모" @@ -7365,7 +8663,22 @@ msgstr "" "까?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "유연모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모" @@ -7373,19 +8686,26 @@ msgstr "" "까?" msgid "Still print by object?" -msgstr "아직도 개체별로 출력하시나요?" +msgstr "아직도 객체별로 출력하시나요?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"지지대 부피는 작지만 강도는 약한 것이 특징인 실험적 모양 \"얇은 나무\"를 추가" -"했습니다.\n" -"접점 레이어 0, 상단 Z 거리 0, 벽 루프 2 와 함께 사용하는 것이 좋습니다." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"지원 인터페이스에 대한 지원 자료를 사용할 때 다음 설정을 권장합니다.\n" +"0 상단 z 거리, 0 인터페이스 간격, 인터레이스된 직선 패턴 및 독립 지지 레이" +"어 높이 비활성화" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7394,21 +8714,12 @@ msgstr "" "아니요 - 이 설정을 변경하지 않습니다" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"\"강한 나무\" 및 \"혼합 나무\" 모양의 경우 최소 접점 레이어 2, 상단 Z 거리 " -"0.1 또는 접점에서 지지대 재료를 사용하는 설정을 권장합니다." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"지지대 접점에 지지대 재료를 사용하는 경우 다음 설정을 권장합니다:\n" -"상단 Z 거리 0, 접점 간격 0, 접점 패턴 동심원 및 독립적 지지대 높이 비활성화" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7422,6 +8733,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "이 옵션을 사용하시겠습니까?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7431,13 +8750,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "레이어 높이가 프린터 설정 -> 압출기 -> 레이어의 제한을 초과합니다.높이 제한으" "로 인해 출력 품질 문제가 발생할 수 있습니다." -msgid "Adjust to the set range automatically? \n" -msgstr "설정 범위에 자동으로 맞춰지나요? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "설정 범위에 자동으로 맞춰지나요?\n" msgid "Adjust" msgstr "조정" @@ -7447,9 +8766,9 @@ msgstr "무시" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "실험적 기능: 플러시를 최소화하기 위해 필라멘트 교체 중에 더 먼 거리에서 필라" "멘트를 집어넣고 절단합니다. 플러시를 눈에 띄게 줄일 수 있지만 노즐 막힘이나 " @@ -7457,9 +8776,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "실험적 기능: 플러시를 최소화하기 위해 필라멘트 교체 중에 더 먼 거리에서 필라" "멘트를 집어넣고 절단합니다. 플러시를 크게 줄일 수 있지만 노즐 막힘이나 기타 " @@ -7472,16 +8791,89 @@ msgid "" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 닦기 타워\"를 추가하는 것이 좋" -"습니다\n" +"툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 프라임 타워\"를 추가하는 것이 " +"좋습니다\n" "빌드 플레이트의 빈 위치를 마우스 오른쪽 버튼으로 클릭하고 \"기본 모델 추가\"-" -"> \"타임랩스 닦기 타워\"를 선택합니다." +"> \"타임랩스 프라임 타워\"를 선택합니다." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"현재 시스템 프리셋의 복사본이 생성되며, 이 복사본은 시스템 프리셋에서 분리됩" +"니다." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "현재 사용자 지정 프리셋이 상위 시스템 프리셋에서 분리됩니다." + +msgid "Modifications to the current profile will be saved." +msgstr "현재 프로필에 대한 수정 사항이 저장됩니다." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"이 작업은 되돌릴 수 없습니다.\n" +"계속 진행하시겠습니까?" + +msgid "Detach preset" +msgstr "프리셋 분리" + +msgid "This is a default preset." +msgstr "기본 프리셋 입니다." + +msgid "This is a system preset." +msgstr "시스템 프리셋 입니다." + +msgid "Current preset is inherited from the default preset." +msgstr "현재 프리셋은 기본 프리셋에서 상속됩니다." + +msgid "Current preset is inherited from" +msgstr "현재 프리셋은 다음에서 상속됩니다" + +msgid "It can't be deleted or modified." +msgstr "삭제하거나 수정할 수 없습니다." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "모든 수정 사항은 이 프리셋에서 상속된 새 프리셋으로 저장해야 합니다." + +msgid "To do that please specify a new name for the preset." +msgstr "이렇게 하려면 프리셋의 새 이름을 지정하세요." + +msgid "Additional information:" +msgstr "추가 정보:" + +msgid "vendor" +msgstr "공급업체" + +msgid "printer model" +msgstr "프린터 모델" + +msgid "default print profile" +msgstr "기본 출력 프로필" + +msgid "default filament profile" +msgstr "기본 필라멘트 프로필" + +msgid "default SLA material profile" +msgstr "기본 SLA 재료 프로필" + +msgid "default SLA print profile" +msgstr "기본 SLA 출력 프로필" + +msgid "full profile name" +msgstr "전체 프로필 이름" + +msgid "symbolic profile name" +msgstr "기호 프로필 이름" msgid "Line width" msgstr "선 너비" msgid "Seam" -msgstr "솔기" +msgstr "재봉선" msgid "Precision" msgstr "정밀도" @@ -7496,7 +8888,7 @@ msgid "Bridging" msgstr "브릿지" msgid "Overhangs" -msgstr "돌출부" +msgstr "오버행" msgid "Walls" msgstr "벽" @@ -7511,15 +8903,15 @@ msgid "Other layers speed" msgstr "다른 레이어 속도" msgid "Overhang speed" -msgstr "돌출부 속도" +msgstr "오버행 속도" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"다양한 돌출부 각도에 대한 속도입니다. 돌출부 정도는 선 너비의 백분율로 표시됩" -"니다. 0 속도는 돌출부 정도에 대한 감속이 없음을 의미하며 벽 속도가 사용됩니다" +"다양한 오버행 각도에 대한 속도입니다. 오버행 정도는 선 너비의 백분율로 표시됩" +"니다. 0 속도는 오버행 정도에 대한 감속이 없음을 의미하며 벽 속도가 사용됩니다" msgid "Bridge" msgstr "브릿지" @@ -7540,10 +8932,13 @@ msgid "Raft" msgstr "라프트" msgid "Support filament" -msgstr "지지대 필라멘트" +msgstr "서포트 필라멘트" + +msgid "Support ironing" +msgstr "" msgid "Tree supports" -msgstr "나무 지지대" +msgstr "트리 서포트" msgid "Multimaterial" msgstr "다중 재료" @@ -7555,7 +8950,7 @@ msgid "Filament for Features" msgstr "기능용 필라멘트" msgid "Ooze prevention" -msgstr "유출 방지" +msgstr "흘러내림 방지" msgid "Skirt" msgstr "스커트" @@ -7564,10 +8959,10 @@ msgid "Special mode" msgstr "특수 모드" msgid "G-code output" -msgstr "G코드 출력" +msgstr "Gcode 출력" msgid "Post-processing Scripts" -msgstr "사후 처리 스크립트" +msgstr "후처리 스크립트" msgid "Notes" msgstr "메모" @@ -7586,7 +8981,7 @@ msgid_plural "" "estimation." msgstr[0] "" "다음 줄 %s에는 예약어가 포함되어 있습니다.\n" -"제거해 주십시오. 그렇지 않으면 G코드 시각화 및 출력 시간 추정치를 능가할 것입" +"제거해 주십시오. 그렇지 않으면 Gcode 시각화 및 출력 시간 추정치를 능가할 것입" "니다." msgid "Reserved keywords found" @@ -7608,7 +9003,7 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "이 필라멘트의 권장 노즐 온도 범위. 0은 설정하지 않음을 의미합니다" msgid "Flow ratio and Pressure Advance" -msgstr "유량 비율 및 압력 사전" +msgstr "압출량 비율 및 PA" msgid "Print chamber temperature" msgstr "출력 챔버 온도" @@ -7616,38 +9011,43 @@ msgstr "출력 챔버 온도" msgid "Print temperature" msgstr "출력 온도" -msgid "Nozzle" -msgstr "노즐" - msgid "Nozzle temperature when printing" msgstr "출력 시 노즐 온도" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "쿨 플레이트(슈퍼택)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "쿨 플레이트" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "쿨 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트에 출력하는 것을 " -"지원하지 않음을 의미합니다" +"지원하지 않음을 의미합니다." -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "텍스처 쿨 플레이트" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" "쿨 플레이트가 설치되었을 때의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 " -"플레이트에서 인쇄를 지원하지 않음을 의미합니다" +"플레이트에서 출력를 지원하지 않음을 의미합니다." -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "엔지니어링 플레이트" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "엔지니어링 플레이트가 설치 시 베드 온도. 값 0은 필라멘트가 엔지니어링 플레이" "트에 출력하는 것을 지원하지 않음을 의미합니다" @@ -7656,28 +9056,25 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "부드러운 PEI 플레이트 / 고온 플레이트" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "부드러운 PEI 플레이트/고온 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 부드" -"러운 PEI 플레이트/고온 플레이트 출력을 지원하지 않음을 의미합니다" +"러운 PEI 플레이트/고온 플레이트 출력을 지원하지 않음을 의미합니다." msgid "Textured PEI Plate" msgstr "텍스처 PEI 플레이트" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "텍스처 PEI 플레이트가 설치된 경우 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플" -"레이트에 출력하는 것을 지원하지 않음을 의미합니다" +"레이트에 출력하는 것을 지원하지 않음을 의미합니다." msgid "Volumetric speed limitation" -msgstr "체적 속도 제한" - -msgid "Cooling" -msgstr "냉각" +msgstr "압출 속도 제한" msgid "Cooling for specific layer" msgstr "특정 레이어 냉각" @@ -7711,7 +9108,7 @@ msgid "Auxiliary part cooling fan" msgstr "보조 출력물 냉각 팬" msgid "Exhaust fan" -msgstr "환기 팬" +msgstr "공기 여과 팬" msgid "During print" msgstr "출력 중" @@ -7720,33 +9117,45 @@ msgid "Complete print" msgstr "출력 완료" msgid "Filament start G-code" -msgstr "필라멘트 시작 G코드" +msgstr "필라멘트 시작 Gcode" msgid "Filament end G-code" -msgstr "필라멘트 종료 G코드" +msgstr "필라멘트 종료 Gcode" msgid "Wipe tower parameters" -msgstr "닦기 타워 매개변수" +msgstr "프라임 타워 매개변수" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "다중 재료 프린터의 단일 압출기 툴 체인지 매개변수" -msgid "Ramming settings" -msgstr "래밍 설정" +msgid "Set" +msgstr "설정" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "다중 재료 프린터의 다중 압출기 툴 체인지 매개변수" +msgid "Dependencies" +msgstr "종속성" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "호환 프로세스 사전설정" + msgid "Printable space" msgstr "출력 가능 공간" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "%1% 매개변수에 잘못된 값이 입력됨: %2%" msgid "G-code flavor is switched" -msgstr "G코드 유형이 변경됨" +msgstr "Gcode 유형이 변경됨" msgid "Cooling Fan" msgstr "냉각 팬" @@ -7758,43 +9167,46 @@ msgid "Extruder Clearance" msgstr "압출기 회피" msgid "Adaptive bed mesh" -msgstr "적응형 베드 메쉬" +msgstr "적응형 베드 메시" msgid "Accessory" msgstr "악세서리" -msgid "Machine gcode" -msgstr "장치 G코드" +msgid "Machine G-code" +msgstr "장치 Gcode" msgid "Machine start G-code" -msgstr "장치 시작 G코드" +msgstr "장치 시작 Gcode" msgid "Machine end G-code" -msgstr "장치 종료 G코드" +msgstr "장치 종료 Gcode" msgid "Printing by object G-code" -msgstr "개체 G코드로 출력" +msgstr "객체 Gcode로 출력" msgid "Before layer change G-code" -msgstr "레이어 변경 전 G코드" +msgstr "레이어 변경 전 Gcode" msgid "Layer change G-code" -msgstr "레이어 변경 G코드" +msgstr "레이어 변경 Gcode" -msgid "Time lapse G-code" -msgstr "타임랩스 G코드" +msgid "Timelapse G-code" +msgstr "타임랩스 Gcode" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" -msgstr "필라멘트 교체 G코드" +msgstr "필라멘트 교체 Gcode" msgid "Change extrusion role G-code" -msgstr "압출 역할 G코드 변경" +msgstr "압출 역할 Gcode 변경" msgid "Pause G-code" -msgstr "일시 정지 G코드" +msgstr "일시 정지 Gcode" msgid "Template Custom G-code" -msgstr "템플릿 사용자 정의 G코드" +msgstr "템플릿 사용자 정의 Gcode" msgid "Motion ability" msgstr "동작 능력" @@ -7802,6 +9214,12 @@ msgstr "동작 능력" msgid "Normal" msgstr "일반" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "속도 제한" @@ -7811,14 +9229,14 @@ msgstr "가속도 제한" msgid "Jerk limitation" msgstr "저크 제한" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "단일 압출기 다중 재료 설정" msgid "Number of extruders of the printer." msgstr "프린터 익스트루더 수." msgid "" -"Single Extruder Multi Material is selected, \n" +"Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" @@ -7831,13 +9249,13 @@ msgid "Nozzle diameter" msgstr "노즐 직경" msgid "Wipe tower" -msgstr "닦기 타워" +msgstr "프라임 타워" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "단일 압출기 다중 재료 매개변수" msgid "" -"This is a single extruder multimaterial printer, diameters of all extruders " +"This is a single extruder multi-material printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" "이것은 단일 압출기 다중 재료 프린터이며 모든 압출기의 직경이 새 값으로 설정됩" @@ -7846,8 +9264,8 @@ msgstr "" msgid "Layer height limits" msgstr "레이어 높이 한도" -msgid "Lift Z Enforcement" -msgstr "강제 Z 올리기" +msgid "Z-Hop" +msgstr "Z올리기" msgid "Retraction when switching material" msgstr "재료 전환 시 후퇴" @@ -7857,12 +9275,20 @@ msgid "" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"닦기 옵션은 펌웨어 후퇴 모드를 사용하는 경우에는 사용할 수 없습니다.\n" +"노즐 청소 옵션은 펌웨어 후퇴 모드를 사용하는 경우에는 사용할 수 없습니다.\n" "\n" "펌웨어 후퇴를 활성화하기 위해 비활성화하겠습니까?" msgid "Firmware Retraction" -msgstr "펌웨어 후퇴" +msgstr "펌웨어 리트렉션" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" msgstr "분리됨" @@ -7875,7 +9301,7 @@ msgstr "" "%d개의 필라멘트 사전 설정과 %d개의 프로세스 사전 설정이 이 프린터에 연결되어 " "있습니다.프린터를 삭제하면 사전 설정도 삭제됩니다." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "다른 프리셋에 상속된 프리셋은 삭제할 수 없습니다!" msgid "The following presets inherit this preset." @@ -7891,24 +9317,17 @@ msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "다음 사전 설정도 삭제됩니다." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"선택한 사전 설정을 삭제하시겠습니까? \n" -"프리셋이 현재 프린터에서 사용 중인 필라멘트와 일치하는 경우,해당 슬롯의 필라" -"멘트 정보를 재설정해 주세요." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "선택한 사전 설정을 %1%로 설정하시겠습니까?" -msgid "All" -msgstr "모두" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "설정" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "현재 값을 재설정하고 전역 값에 연결하려면 클릭합니다." @@ -7998,8 +9417,8 @@ msgstr "" "않은 변경 사항을 포함:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "사전 설정 \"%1%\"의 일부 설정을 변경했습니다. " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "사전 설정 \"%1%\"의 일부 설정을 변경했습니다." msgid "" "\n" @@ -8032,9 +9451,6 @@ msgstr "" msgid "Extruders count" msgstr "압출기 수" -msgid "General" -msgstr "일반" - msgid "Capabilities" msgstr "성능" @@ -8098,6 +9514,9 @@ msgstr "원작자" msgid "Model Name" msgstr "모델명" +msgid "Description:" +msgstr "설명:" + #, c-format, boost-format msgid "%s Update" msgstr "%s 업데이트" @@ -8108,22 +9527,19 @@ msgstr "새 버전을 사용할 수 있습니다" msgid "Configuration update" msgstr "구성 업데이트" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "새 구성 패키지를 사용할 수 있습니다. 설치하시겠습니까?" -msgid "Description:" -msgstr "설명:" - msgid "Configuration incompatible" msgstr "호환되지 않는 구성" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "구성 패키지가 현재 응용 프로그램과 호환되지 않습니다." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "구성 패키지가 현재 애플리케이션과 호환되지 않습니다.\n" "%s는 구성 패키지를 업데이트합니다. 그렇지 않으면 시작할 수 없습니다" @@ -8132,9 +9548,6 @@ msgstr "" msgid "Exit %s" msgstr "%s 종료" -msgid "the Configuration package is incompatible with current APP." -msgstr "구성 패키지가 현재 애플리케이션과 호환되지 않습니다." - msgid "Configuration updates" msgstr "구성 업데이트" @@ -8144,24 +9557,41 @@ msgstr "사용 가능한 업데이트가 없습니다." msgid "The configuration is up to date." msgstr "구성이 최신 상태입니다." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Obj 파일 가져오기 색상" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "색상 수 지정:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "색상 개수는 [%d, %d] 범위 내에 있어야 합니다." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "추천 " -msgid "Current filament colors:" -msgstr "현재 필라멘트 색상:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "빠른 설정:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "색상 일치" @@ -8172,34 +9602,177 @@ msgstr "대략적인 색상 일치." msgid "Append" msgstr "추가" -msgid "Add consumable extruder after existing extruders." -msgstr "기존 압출기 뒤에 소모성 압출기를 추가합니다." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "매핑된 압출기를 재설정합니다." -msgid "Cluster colors" -msgstr "클러스터 색상" - -msgid "Map Filament" -msgstr "지도 필라멘트" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"참고: 색상이 선택되었습니다. 확인을 누르시면\n" -" 계속하거나 수동으로 조정할수 있습니다." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "AMS 사용" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"선택한 프린터(%s)는 슬라이서(%s)에서 선택한 프린터 프로필과 호환되지 않습니" +"다." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"출력 순서가 \"객체별\"로 설정되어 있으므로 시간 경과는 지원되지 않습니다." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"경고: 새로 추가된 개수와\n" -" 현재 압출기는 16개를 초과합니다." msgid "Ramming customization" -msgstr "래밍 사용자 정의" +msgstr "채워넣기 사용자 정의" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" @@ -8212,45 +9785,33 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"래밍은 단일 압출기 다중 재료 프린터에서 툴 체인지 직전의 급속 압출을 의미합니" -"다. 필라멘트를 뺄때 끝 모양을 적절하게 형성하여 새 필라멘트의 삽입을 방해하" -"지 않고 나중에 다시 삽입할 수 있도록 하는 것입니다. 이 단계는 중요하며, 좋은 " -"모양을 얻으려면 재료마다 다른 압출 속도가 필요할 수 있습니다. 이러한 이유로 " -"래밍 중 압출 속도는 조정 가능합니다.\n" +"채워넣기는 단일 압출기 다중 재료 프린터에서 툴 체인지 직전의 급속 압출을 의미" +"합니다. 필라멘트를 뺄때 끝 모양을 적절하게 형성하여 새 필라멘트의 삽입을 방해" +"하지 않고 나중에 다시 삽입할 수 있도록 하는 것입니다. 이 단계는 중요하며, 좋" +"은 모양을 얻으려면 재료마다 다른 압출 속도가 필요할 수 있습니다. 이러한 이유" +"로 채우기 중 압출 속도는 조정 가능합니다.\n" "\n" "이는 전문가 수준 설정이므로 잘못 조정하면 막힘, 필라멘트 갈림 등이 발생할 수 " "있습니다." -msgid "Total ramming time" -msgstr "총 래밍 시간" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" -msgid "s" -msgstr "초" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "총 래밍 부피" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "래밍 선 너비" - -msgid "Ramming line spacing" -msgstr "래밍 선 간격" - -msgid "Auto-Calc" -msgstr "자동 계산" - -msgid "Re-calculate" -msgstr "다시 계산" - -msgid "Flushing volumes for filament change" -msgstr "필라멘트 교체를 위한 버리기 볼륨" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca는 필라멘트 색상이 변경될 때마다 버리기 볼륨을 다시 계산합니다. Orca " -"Slicer > 기본 설정에서 자동 계산을 비활성화할 수 있습니다" msgid "Flushing volume (mm³) for each filament pair." msgstr "각 필라멘트 쌍에 대한 버리기 볼륨(mm³)." @@ -8263,23 +9824,23 @@ msgstr "제안: [%d, %d] 범위의 버리기 볼륨" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "승수는 [%.2f, %.2f] 범위에 있어야 합니다." +msgid "Re-calculate" +msgstr "다시 계산" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "승수" -msgid "unloaded" -msgstr "언로드됨" +msgid "Flushing volumes for filament change" +msgstr "필라멘트 교체를 위한 버리기 볼륨" -msgid "loaded" -msgstr "로드됨" - -msgid "Filament #" -msgstr "필라멘트 #" - -msgid "From" -msgstr "에서" - -msgid "To" -msgstr "으로" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8297,7 +9858,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "미디어 재생을 위해 등록된 뱀부소스 컴포넌트가 누락되었습니다! 뱀부스튜디오를 " "다시 설치하거나 판매 후 도움을 받으세요." @@ -8311,7 +9872,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "시스템에 동영상 재생을 위해 필요한 GStreamer용 H.264 코덱이 존재하지 않습니" @@ -8334,17 +9895,14 @@ msgid "Configuration package changed" msgstr "구성 패키지가 변경됨" msgid "Toolbar" -msgstr "도구 상자" +msgstr "도구 모음" msgid "Objects list" -msgstr "개체 목록" +msgstr "객체 목록" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "STL/STEP/3MF/OBJ/AMF 파일에서 형상 데이터 가져오기" -msgid "Shift+G" -msgstr "" - msgid "Paste from clipboard" msgstr "클립보드에서 붙여넣기" @@ -8360,35 +9918,26 @@ msgstr "키보드 단축키 목록 보기" msgid "Global shortcuts" msgstr "전역 단축키" -msgid "Rotate View" -msgstr "시점 회전" - msgid "Pan View" msgstr "시점 이동" -msgid "Mouse wheel" -msgstr "마우스 휠" +msgid "Rotate View" +msgstr "시점 회전" msgid "Zoom View" msgstr "시점 확대/축소" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"선택한 개체 또는 모든 개체의 방향을 자동으로 지정합니다.선택한 개체가 있는 경" -"우 선택한 개체의 방향만 지정합니다.그렇지 않으면 현재 디스크에 있는 모든 개체" -"의 방향이 지정됩니다." +"선택한 객체 또는 모든 객체의 방향을 자동으로 조정합니다. 선택한 객체가 있는 " +"경우 선택한 객체만 조정되고, 그렇지 않은 경우 프로젝트의 모든 객체가 조정됩니" +"다." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "현재 플레이트에 있는 모든 객체의 방향을 자동으로 지정합니다." msgid "Collapse/Expand the sidebar" msgstr "사이드바 접기/펼치기" @@ -8403,13 +9952,10 @@ msgid "Select a part" msgstr "부품 선택" msgid "Select multiple objects" -msgstr "여러 개체 선택" - -msgid "Shift+Left mouse button" -msgstr "Shift+마우스 왼쪽 버튼" +msgstr "여러 객체 선택" msgid "Select objects by rectangle" -msgstr "사각형으로 개체 선택" +msgstr "사각형으로 객체 선택" msgid "Arrow Up" msgstr "화살표 위로" @@ -8435,14 +9981,11 @@ msgstr "화살표 오른쪽으로" msgid "Move selection 10 mm in positive X direction" msgstr "선택 항목을 +X 방향으로 10mm 이동" -msgid "Shift+Any arrow" -msgstr "Shift+화살표" - msgid "Movement step set to 1 mm" msgstr "1mm로 이동" msgid "keyboard 1-9: set filament for object/part" -msgstr "키보드 1-9: 개체/부품에 필라멘트 할당" +msgstr "키보드 1-9: 객체/부품에 필라멘트 할당" msgid "Camera view - Default" msgstr "카메라 시점 - 기본" @@ -8466,31 +10009,46 @@ msgid "Camera Angle - Right side" msgstr "카메라 각도 - 우측" msgid "Select all objects" -msgstr "모든 개체 선택" +msgstr "모든 객체 선택" msgid "Gizmo move" -msgstr "도구 상자 이동" - -msgid "Gizmo scale" -msgstr "도구 상자 배율" +msgstr "변형도구 이동" msgid "Gizmo rotate" -msgstr "도구 상자 회전" +msgstr "변형도구 회전" + +msgid "Gizmo scale" +msgstr "변형도구 배율" + +msgid "Gizmo place face on bed" +msgstr "변형도구 바닥면 선택" msgid "Gizmo cut" -msgstr "도구 상자 잘라내기" +msgstr "변형도구 잘라내기" -msgid "Gizmo Place face on bed" -msgstr "도구 상자 바닥면 선택" +msgid "Gizmo mesh boolean" +msgstr "변형도구 합집합/차집합/교집합" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "도구 상자 지지대 칠하기" +msgstr "변형도구 서포트 칠하기" msgid "Gizmo FDM paint-on seam" -msgstr "도구 상자 솔기 칠하기" +msgstr "변형도구 재봉선 칠하기" -msgid "Gizmo Text emboss / engrave" -msgstr "기즈모 텍스트 엠보싱/인그레이빙" +msgid "Gizmo text emboss/engrave" +msgstr "변형도구 - 텍스트 엠보싱/인그레이빙" + +msgid "Gizmo measure" +msgstr "변형도구 측정" + +msgid "Gizmo assemble" +msgstr "변형도구 병합" + +msgid "Gizmo brim ears" +msgstr "변형도구 브림 귀" msgid "Zoom in" msgstr "확대" @@ -8508,31 +10066,31 @@ msgid "Move: press to snap by 1mm" msgstr "이동: 눌러서 1mm씩 이동" msgid "Support/Color Painting: adjust pen radius" -msgstr "지지대/색상 칠하기: 펜 반경 조정" +msgstr "서포트/색상 칠하기: 펜 반경 조정" msgid "Support/Color Painting: adjust section position" -msgstr "지지대/색상 칠하기: 단면 위치 조정" +msgstr "서포트/색상 칠하기: 단면 위치 조정" msgid "Gizmo" -msgstr "도구 상자" +msgstr "변형도구" msgid "Set extruder number for the objects and parts" -msgstr "개체 및 부품에 대한 압출기 번호 설정" +msgstr "객체 및 부품에 대한 압출기 번호 설정" -msgid "Delete objects, parts, modifiers " -msgstr "개체, 부품, 수정자 삭제 " +msgid "Delete objects, parts, modifiers" +msgstr "객체, 부품, 수정자 삭제" msgid "Select the object/part and press space to change the name" -msgstr "개체/부품을 선택하고 스페이스바를 눌러 이름을 변경합니다" +msgstr "객체/부품을 선택하고 스페이스바를 눌러 이름을 변경합니다" msgid "Mouse click" msgstr "마우스 클릭" msgid "Select the object/part and mouse click to change the name" -msgstr "개체/부품을 선택하고 마우스를 클릭하여 이름을 변경합니다" +msgstr "객체/부품을 선택하고 마우스를 클릭하여 이름을 변경합니다" msgid "Objects List" -msgstr "개체 목록" +msgstr "객체 목록" msgid "Vertical slider - Move active thumb Up" msgstr "수직 슬라이더 - 활성 레이어 위로 이동" @@ -8549,15 +10107,12 @@ msgstr "수평 슬라이더 - 활성 라인 오른쪽으로 이동" msgid "On/Off one layer mode of the vertical slider" msgstr "수직 슬라이더의 한 레이어 모드 켜기/끄기" -msgid "On/Off g-code window" -msgstr "G코드 창 켜기/끄기" +msgid "On/Off G-code window" +msgstr "Gcode 창 켜기/끄기" msgid "Move slider 5x faster" msgstr "슬라이더를 5배 빠르게 이동" -msgid "Shift+Mouse wheel" -msgstr "Shift+마우스 휠" - msgid "Horizontal slider - Move to start position" msgstr "수평 슬라이더 - 시작 위치로 이동" @@ -8568,7 +10123,7 @@ msgid "Release Note" msgstr "릴리스 노트" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "버전 %s 업데이트 정보 :" msgid "Network plug-in update" @@ -8581,7 +10136,7 @@ msgstr "" "니다." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "새 네트워크 플러그인(%s)을 사용할 수 있습니다. 설치하시겠습니까?" msgid "New version of Snapmaker Orca" @@ -8590,61 +10145,29 @@ msgstr "Snapmaker Orca의 새 버전" msgid "Skip this Version" msgstr "이 버전 건너뛰기" -msgid "Done" -msgstr "완료" - -msgid "resume" -msgstr "재개" - -msgid "Resume Printing" -msgstr "출력 재개" - -msgid "Resume Printing(defects acceptable)" -msgstr "출력 재개(결함 허용)" - -msgid "Resume Printing(problem solved)" -msgstr "출력 재개(문제 해결)" - -msgid "Stop Printing" -msgstr "출력 중지" - -msgid "Check Assistant" -msgstr "어시스턴트 확인" - -msgid "Filament Extruded, Continue" -msgstr "필라멘트 압출, 계속" - -msgid "Not Extruded Yet, Retry" -msgstr "아직 압출되지 않았습니다. 다시 시도하세요" - -msgid "Finished, Continue" -msgstr "완료, 계속" - -msgid "Load Filament" -msgstr "필라멘트 넣기" - -msgid "Filament Loaded, Resume" -msgstr "필라멘트 로드됨, 재개" - -msgid "View Liveview" -msgstr "실시간 보기" - msgid "Confirm and Update Nozzle" msgstr "노즐 확인 및 업데이트" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN 연결 실패(출력 파일 전송 중)" +msgid "Connect the printer using IP and access code" +msgstr "IP 및 액세스 코드를 사용하여 프린터 연결" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"1단계, Snapmaker Orca와 프린터가 동일한 네트워크에 연결되어 있는지 확인하세요." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"2단계, 아래의 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 수정하세요." msgid "IP" msgstr "IP" @@ -8652,18 +10175,42 @@ msgstr "IP" msgid "Access Code" msgstr "액세스 코드" +msgid "Printer model" +msgstr "프린터 모델" + +msgid "Printer name" +msgstr "프린터 이름" + msgid "Where to find your printer's IP and Access Code?" msgstr "프린터의 IP 및 액세스 코드는 어디에서 찾을 수 있습니까?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "3단계: IP 주소를 ping하여 패킷 손실 및 대기 시간을 확인합니다." +msgid "Connect" +msgstr "연결" -msgid "Test" -msgstr "테스트" +msgid "Manual Setup" +msgstr "수동 설정" msgid "IP and Access Code Verified! You may close the window" msgstr "IP 및 액세스 코드가 확인되었습니다. 창을 닫아도 됩니다" +msgid "connecting..." +msgstr "연결중..." + +msgid "Failed to connect to printer." +msgstr "프린터에 연결하지 못했습니다." + +msgid "Failed to publish login request." +msgstr "로그인 요청을 게시하지 못했습니다." + +msgid "The printer has already been bound." +msgstr "프린터가 이미 바인딩되었습니다." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "프린터 모드가 올바르지 않습니다. LAN 전용으로 전환하세요." + +msgid "Connecting to printer... The dialog will close later" +msgstr "프린터에 연결 중... 대화 상자가 나중에 닫힙니다." + msgid "Connection failed, please double check IP and Access Code" msgstr "연결에 실패했습니다. IP와 액세스 코드를 다시 확인하세요" @@ -8674,31 +10221,51 @@ msgstr "" "연결에 실패했습니다. IP와 액세스 코드가 올바른 경우 \n" "네트워크 문제를 해결하려면 3단계로 이동하세요" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "모델:" -msgid "Serial:" -msgstr "시리얼:" - -msgid "Version:" -msgstr "버전:" - msgid "Update firmware" msgstr "펌웨어 업데이트" msgid "Beta version" msgstr "베타 버전" -msgid "Latest version" -msgstr "최신 버전" - msgid "Updating" msgstr "업데이트 중" -msgid "Updating failed" +msgid "Update failed" msgstr "업데이트 실패" -msgid "Updating successful" +msgid "Update successful" msgstr "업데이트 성공" msgid "" @@ -8729,8 +10296,8 @@ msgstr "" msgid "Extension Board" msgstr "확장 보드" -msgid "Saving objects into the 3mf failed." -msgstr "개체를 3mf에 저장하지 못했습니다." +msgid "Saving objects into the 3MF failed." +msgstr "객체를 3mf에 저장하지 못했습니다." msgid "Only Windows 10 is supported." msgstr "윈도우 10만 지원합니다." @@ -8739,37 +10306,37 @@ msgid "Failed to initialize the WinRT library." msgstr "WinRT 라이브러리를 초기화하지 못했습니다." msgid "Exporting objects" -msgstr "개체 내보내는 중" +msgstr "객체 내보내는 중" msgid "Failed loading objects." -msgstr "개체를 로드하지 못했습니다." +msgstr "객체를 로드하지 못했습니다." msgid "Repairing object by Windows service" -msgstr "Windows 서비스로 개체 수리 중" +msgstr "Windows 서비스로 객체 수리 중" msgid "Repair failed." msgstr "수리에 실패하였습니다." msgid "Loading repaired objects" -msgstr "수리된 개체 로드" +msgstr "수리된 객체 로드" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "3mf 파일 내보내기 실패" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "3mf 파일 가져오기 실패" -msgid "Repaired 3mf file does not contain any object" -msgstr "수리된 3mf 파일에 개체가 없습니다" +msgid "Repaired 3MF file does not contain any object" +msgstr "수리된 3MF 파일에 객체가 없습니다" -msgid "Repaired 3mf file contains more than one object" -msgstr "수리된 3mf 파일에 둘 이상의 개체가 포함되어 있습니다" +msgid "Repaired 3MF file contains more than one object" +msgstr "수리된 3MF 파일에 둘 이상의 객체가 포함되어 있습니다" -msgid "Repaired 3mf file does not contain any volume" -msgstr "수리된 3mf 파일에 부피가 없습니다" +msgid "Repaired 3MF file does not contain any volume" +msgstr "수리된 3MF 파일에 부피가 없습니다" -msgid "Repaired 3mf file contains more than one volume" -msgstr "수리된 3mf 파일에 둘 이상의 부피가 포함되어 있습니다" +msgid "Repaired 3MF file contains more than one volume" +msgstr "수리된 3MF 파일에 둘 이상의 부피가 포함되어 있습니다" msgid "Repair finished" msgstr "수리 완료" @@ -8779,7 +10346,7 @@ msgstr "수리 취소됨" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" -msgstr "파일 %1%을(를) %2%(으)로 복사 실패: %3%" +msgstr "파일 %1%를 %2%으로 복사 실패: %3%" msgid "Need to check the unsaved changes before configuration updates." msgstr "구성 업데이트 전에 저장되지 않은 변경 사항을 확인해야 합니다." @@ -8791,51 +10358,60 @@ msgid " updated to " msgstr " 로 업데이트되었습니다 " msgid "Open G-code file:" -msgstr "G코드 파일 열기:" +msgstr "Gcode 파일 열기:" msgid "" "One object has empty initial layer and can't be printed. Please Cut the " "bottom or enable supports." msgstr "" -"개체 하나에 초기 레이어가 비어 있어 출력할 수 없습니다. 바닥을 자르거나 지지" -"대를 활성화하세요." +"객체 하나에 초기 레이어가 비어 있어 출력할 수 없습니다. 바닥을 자르거나 서포" +"트를 활성화하세요." #, boost-format msgid "Object can't be printed for empty layer between %1% and %2%." -msgstr "%1%에서 %2% 사이의 빈 레이어에 대해 개체를 출력할 수 없습니다." +msgstr "%1%에서 %2% 사이의 빈 레이어에 대해 객체를 출력할 수 없습니다." #, boost-format msgid "Object: %1%" -msgstr "개체: %1%" +msgstr "객체: %1%" msgid "" "Maybe parts of the object at these height are too thin, or the object has " "faulty mesh" msgstr "" -"이 높이에 있는 개체의 일부가 너무 얇거나 개체에 결함이 있는 메쉬가 있을 수 있" +"이 높이에 있는 객체의 일부가 너무 얇거나 객체에 결함이 있는 메시가 있을 수 있" "습니다" msgid "No object can be printed. Maybe too small" -msgstr "개체를 출력할 수 없습니다. 너무 작을 수 있습니다" +msgstr "객체를 출력할 수 없습니다. 너무 작을 수 있습니다" msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." -msgstr "인쇄물이 프라이밍 영역에 매우 가깝습니다. 충돌이 없는지 확인합니다." +msgstr "출력물이 프라이밍 영역에 매우 가깝습니다. 충돌이 없는지 확인합니다." msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"잘못된 사용자 정의 G코드로 인해 gcode를 생성하지 못했습니다.\n" +"잘못된 사용자 정의 Gcode로 인해 gcode를 생성하지 못했습니다.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." -msgstr "사용자 정의 G코드를 확인하거나 기본 사용자 정의 G코드를 사용하세요." +msgstr "사용자 정의 Gcode를 확인하거나 기본 사용자 정의 Gcode를 사용하세요." #, boost-format msgid "Generating G-code: layer %1%" -msgstr "G코드 생성 중: 레이어 %1%" +msgstr "Gcode 생성 중: 레이어 %1%" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" msgid "Inner wall" msgstr "내벽" @@ -8844,7 +10420,7 @@ msgid "Outer wall" msgstr "외벽" msgid "Overhang wall" -msgstr "돌출부 벽" +msgstr "오버행 벽" msgid "Sparse infill" msgstr "드문 채우기" @@ -8865,16 +10441,16 @@ msgid "Gap infill" msgstr "간격 채우기" msgid "Support interface" -msgstr "지지대 접점" +msgstr "서포트 접점" msgid "Support transition" -msgstr "지지대 전환" +msgstr "서포트 전환" msgid "Multiple" msgstr "다수" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "%1%의 선 너비를 계산하지 못했습니다. \"%2%\"의 값을 가져올 수 없습니다 " @@ -8895,7 +10471,7 @@ msgid "file too large" msgstr "파일이 너무 큽니다" msgid "unsupported method" -msgstr "지지대 재료 없는 방식" +msgstr "지원되지 않는 방법" msgid "unsupported encryption" msgstr "지원되지 않는 암호화" @@ -8986,36 +10562,60 @@ msgstr "" #, boost-format msgid "%1% is too close to others, and collisions may be caused." -msgstr "%1% 이(가) 다른 개체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." +msgstr "%1% 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." #, boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "%1% 이(가) 너무 높아서 충돌이 출력 시 발생할 수 있습니다." -msgid " is too close to others, there may be collisions when printing." -msgstr " 이(가) 다른 개체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "프라임 타워" msgid " is too close to others, and collisions may be caused.\n" -msgstr " 이(가) 다른 개체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다.\n" +msgstr " 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다.\n" msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "" " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"온도 차이가 큰 필라멘트를 여러 개 함께 출력할 수 없습니다. 그렇지 않으면 출" -"력 중에 압출기와 노즐이 막히거나 손상될 수 있습니다" msgid "No extrusions under current settings." msgstr "현재 설정에 압출기가 없습니다." @@ -9024,31 +10624,48 @@ msgid "" "Smooth mode of timelapse is not supported when \"by object\" sequence is " "enabled." msgstr "" -"타임랩스의 유연 모드는 \"개체별\" 출력순서가 활성화된 경우 지원되지 않습니다." +"타임랩스의 유연 모드는 \"객체별\" 출력순서가 활성화된 경우 지원되지 않습니다." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"나선형 꽃병 모드에서 여러 개체를 출력하려면 \"개체별\" 출력 순서를 선택하세" +"나선형 꽃병 모드에서 여러 객체를 출력하려면 \"객체별\" 출력 순서를 선택하세" "요." msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." msgstr "" -"개체에 둘 이상의 재료가 포함된 경우 나선형 꽃병 모드가 작동하지 않습니다." +"객체에 둘 이상의 재료가 포함된 경우 나선형 꽃병 모드가 작동하지 않습니다." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"객체 %1% 자체는 빌드 볼륨에 맞지만, 머티리얼 수축 보정 때문에 최대 빌드 볼륨 " +"높이를 초과합니다." #, boost-format msgid "The object %1% exceeds the maximum build volume height." -msgstr "%1% 개체가 최대 빌드 부피 높이를 초과합니다." +msgstr "%1% 객체가 최대 빌드 부피 높이를 초과합니다." #, boost-format msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." msgstr "" -"%1% 개체 자체가 빌드 부피에 맞지만 마지막 레이어가 최대 빌드 부피 높이를 초과" +"%1% 객체 자체가 빌드 부피에 맞지만 마지막 레이어가 최대 빌드 부피 높이를 초과" "합니다." msgid "" @@ -9058,7 +10675,7 @@ msgstr "" "모델 크기를 줄이거나 현재 출력 설정을 변경하고 다시 시도할 수 있습니다." msgid "Variable layer height is not supported with Organic supports." -msgstr "유기체 지지대에서는 가변 레이어 높이가 지원되지 않습니다." +msgstr "유기체 서포트에서는 가변 레이어 높이가 지원되지 않습니다." msgid "" "Different nozzle diameters and different filament diameters may not work " @@ -9072,55 +10689,67 @@ msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"닦기 타워는 현재 관련 압출기에서만 지원됩니다.주소 지정" +"프라임 타워는 현재 관련 압출기에서만 지원됩니다.주소 지정" "(use_relative_e_distances=1)." msgid "" "Ooze prevention is only supported with the wipe tower when " "'single_extruder_multi_material' is off." msgstr "" -"오수 방지는 'single_extruder_multi_material'이 꺼져 있을 때만 와이프 타워에" -"서 지원됩니다." +"흘러내림 방지는 'single_extruder_multi_material'이 꺼져 있을 때만 와이프 타워" +"에서 지원됩니다." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"프라임 타워는 현재 Marlin, RepRap/Sprinter, RepRapFirmware 및 Repetier G코드 " +"프라임 타워는 현재 Marlin, RepRap/Sprinter, RepRapFirmware 및 Repetier Gcode " "유형에서만 지원됩니다." msgid "The prime tower is not supported in \"By object\" print." -msgstr "프라임 타워는 \"개체별\" 출력에서 지원되지 않습니다." +msgstr "프라임 타워는 \"객체별\" 출력에서 지원되지 않습니다." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"적응형 레이어 높이가 켜져 있으면 프라임 타워가 지원되지 않습니다. 모든 개체" +"적응형 레이어 높이가 켜져 있으면 프라임 타워가 지원되지 않습니다. 모든 객체" "의 레이어 높이가 동일해야 합니다." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "프라임 타워는 \"지지대 간격\"이 레이어 높이의 배수여야 합니다" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." +msgstr "프라임 타워는 \"서포트 간격\"이 레이어 높이의 배수여야 합니다" -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "프라임 타워는 모든 개체의 레이어 높이가 동일해야 합니다" +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "프라임 타워는 모든 객체의 레이어 높이가 동일해야 합니다" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" -"프라임 타워는 모든 개체가 동일한 수의 라프트 레이어 위에 출력되어야 합니다" +"프라임 타워는 모든 객체가 동일한 수의 라프트 레이어 위에 출력되어야 합니다" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"프라임 타워는 여러 오브젝트가 동일한 support_top_z_distance로 출력된 경우에" +"만 지원됩니다" msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." -msgstr "프라임 타워는 모든 개체가 동일한 레이어 높이로 슬라이스되어야 합니다." +msgstr "프라임 타워는 모든 객체가 동일한 레이어 높이로 슬라이스되어야 합니다." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" -"프라임 타워는 모든 개체의 가변 레이어 높이가 동일한 경우에만 지원됩니다" +"프라임 타워는 모든 객체의 가변 레이어 높이가 동일한 경우에만 지원됩니다" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "하나 이상의 객체에 프린터에 없는 압출기가 할당되었습니다." msgid "Too small line width" msgstr "선 너비가 너무 작습니다" @@ -9128,34 +10757,44 @@ msgstr "선 너비가 너무 작습니다" msgid "Too large line width" msgstr "선 너비가 너무 큽니다" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"노즐 직경이 다른 여러 개의 압출기로 출력. 현재 필라멘트를 사용하여 서포트를 " +"출하려면(support_filament == 0 또는 support_interface_ilament == 0) 모든 노즐" +"의 직경이 같아야 합니다." + msgid "" "The prime tower requires that support has the same layer height with object." -msgstr "프라임 타워는 지지대가 개체와 동일한 레이어 높이를 갖도록 요구합니다." +msgstr "프라임 타워는 서포트가 객체와 동일한 레이어 높이를 갖도록 요구합니다." msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." msgstr "" -"유기체 지지대 나무 끝 직경은 지지대 재료 압출 너비보다 작아서는 안 됩니다." +"유기체 서포트 트리 끝 직경은 서포트 재료 압출 너비보다 작아서는 안 됩니다." msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" -"유기체 지지대 가지 직경은 지지대 재료 압출 너비의 2배보다 작아서는 안 됩니다." +"유기체 서포트 가지 직경은 서포트 재료 압출 너비의 2배보다 작아서는 안 됩니다." msgid "" "Organic support branch diameter must not be smaller than support tree tip " "diameter." -msgstr "유기체 지지대 가지 직경은 지지대 나무 끝 직경보다 작을 수 없습니다." +msgstr "유기체 서포트 가지 직경은 서포트 트리 끝 직경보다 작을 수 없습니다." msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -"지지대 강제기가 사용되지만 지지대가 활성화되지 않습니다. 지지대를 활성화하세" +"서포트 강제기가 사용되지만 서포트가 활성화되지 않습니다. 서포트를 활성화하세" "요." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "레이어 높이는 노즐 직경을 초과할 수 없습니다" msgid "" @@ -9200,6 +10839,15 @@ msgstr "" "Orca는 저크 속도를 자동으로 제한하여 프린터 성능을 초과하지 않도록 합니다.\n" "더 빠른 속도를 얻으려면 프린터 구성에서 최대 저크 설정을 조정할 수 있습니다." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9229,21 +10877,39 @@ msgstr "" "더 빠른 속도를 얻으려면 프린터 구성에서 machine_max_acceleration_travel 값을 " "조정할 수 있습니다." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"사용된 필라멘트의 필라멘트 수축이 크게 다르기 때문에 필라멘트 수축은 사용되" +"지 않습니다." + msgid "Generating skirt & brim" msgstr "스커트 & 브림 생성 중" msgid "Exporting G-code" -msgstr "G코드 내보내는 중" +msgstr "Gcode 내보내는 중" msgid "Generating G-code" -msgstr "G코드 생성 중" +msgstr "Gcode 생성 중" msgid "Failed processing of the filename_format template." msgstr "파일 이름 형식 템플릿 처리에 실패했습니다." +msgid "Printer technology" +msgstr "프린터 기술" + msgid "Printable area" msgstr "출력 가능 영역" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "베드 제외 구역" @@ -9266,8 +10932,8 @@ msgid "Elephant foot compensation" msgstr "코끼리 발 보정" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "코끼리 발 효과를 보정하기 위해 빌드 플레이트에 닿는 첫 레이어를 축소합니다" @@ -9289,7 +10955,7 @@ msgstr "레이어" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "각 레이어에 대한 슬라이스 높이입니다. 레이어 높이가 작다는 것은 더 정확하고 " "더 많은 출력 시간을 의미합니다" @@ -9297,13 +10963,21 @@ msgstr "" msgid "Printable height" msgstr "출력 가능 높이" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "프린터 기계장치에 의해 제한되는 출력 가능한 최대 높이" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "선호하는 방향" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "최초 임포트 시 Z축에서 자동으로 스톨 방향 지정" msgid "Printer preset names" @@ -9312,7 +10986,7 @@ msgstr "프린터 사전 설정 이름" msgid "Use 3rd-party print host" msgstr "타사 출력 호스트 사용" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "타사 프린트 호스트를 통해 뱀부랩의 프린터 제어 허용" msgid "Hostname, IP or URL" @@ -9325,7 +10999,7 @@ msgid "" "user name and password into the URL in the following format: https://" "username:password@your-octopi-address/" msgstr "" -"Snapmaker Orca은 G코드 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 " +"Snapmaker Orca은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 " "프린터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다. " "기본 인증이 활성화된 HAProxy 뒤의 출력 호스트는 https://username:" "password@your-octopi-address/ 형식의 URL에 사용자 이름과 암호를 입력하여 액세" @@ -9335,7 +11009,7 @@ msgid "Device UI" msgstr "장치 UI" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Print_host와 동일하지 않은 경우 장치 사용자 인터페이스의 URL을 지정하세요" @@ -9346,10 +11020,10 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orca은 G코드 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 " +"Snapmaker Orca은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 " "인증에 필요한 API 키 또는 비밀번호가 포함되어야 합니다." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "프린터 이름" msgid "HTTPS CA File" @@ -9380,7 +11054,7 @@ msgstr "" "배포 지점이 없거나 오프라인인 경우 HTTPS 인증서 해지 검사를 무시합니다. 연결" "이 실패할 경우 자체 서명된 인증서에 대해 이 옵션을 사용할 수 있습니다." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "물리적 프린터 관련 사전 설정 이름" msgid "Authorization Type" @@ -9392,20 +11066,21 @@ msgstr "API 키" msgid "HTTP digest" msgstr "HTTP 다이제스트" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "벽 가로지름 방지" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "벽을 가로질러 이동하지 않고 우회하여 표면에 방울 발생을 방지합니다" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "벽 가로지름 방지 - 최대 우회 길이" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "벽 가로지름 방지를 위한 최대 우회 거리. 우회 거리가 이 값보다 크면 우회하지 " "않습니다. 우회 길이는 절대값 또는 직접 이동 경로의 백분율(예: 50%)로 지정할 " @@ -9418,42 +11093,44 @@ msgid "Other layers" msgstr "다른 레이어" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력" -"을 지원하지 않음을 의미합니다" - -msgid "°C" -msgstr "°C" +"을 지원하지 않음을 의미합니다." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "초기 레이어를 제외한 레이어의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 " -"플레이트에서 인쇄를 지원하지 않음을 의미합니다" +"플레이트에서 출력를 지원하지 않음을 의미합니다." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 엔지니어링 플레이" -"트 출력을 지원하지 않음을 의미합니다" +"트 출력을 지원하지 않음을 의미합니다." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 고온 플레이트 출력" -"을 지원하지 않음을 의미합니다" +"을 지원하지 않음을 의미합니다." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플레이" -"트 출력을 지원하지 않음을 의미합니다" +"트 출력을 지원하지 않음을 의미합니다." msgid "Initial layer" msgstr "초기 레이어" @@ -9462,54 +11139,62 @@ msgid "Initial layer bed temperature" msgstr "초기 레이어 베드 온도" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 쿨 플레이트(슈퍼택)에 출력" +"할 수 없음을 의미합니다." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "초기 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음" -"을 의미합니다" +"을 의미합니다." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 플레이트에 인쇄" -"할 수 없음을 의미합니다" +"초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 플레이트에 출력" +"할 수 없음을 의미합니다." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "초기 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음" -"을 의미합니다" +"을 의미합니다." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 고온 플레이트 출력을 지원하" -"지 않음을 의미합니다" +"지 않음을 의미합니다." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "초기 레이어의 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플레이트 출력을 지원하" -"지 않음을 의미합니다" +"지 않음을 의미합니다." -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "프린터가 지원하는 베드 유형" msgid "Smooth Cool Plate" msgstr "부드러운 쿨 플레이트" -msgid "Engineering Plate" -msgstr "엔지니어링 플레이트" - msgid "Smooth High Temp Plate" msgstr "부드러운 고온 플레이트" -msgid "Textured Cool Plate" -msgstr "텍스처 쿨 플레이트" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "" msgid "First layer print sequence" msgstr "첫 레이어 출력 순서" @@ -9523,8 +11208,8 @@ msgstr "다른 레이어 수 출력 순서" msgid "Other layers filament sequence" msgstr "다른 층 필라멘트 순서" -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "이 G코드는 Z좌표를 올리기 전 모든 레이어 변경에 삽입됩니다" +msgid "This G-code is inserted at every layer change before the Z lift." +msgstr "이 Gcode는 Z좌표를 올리기 전 모든 레이어 변경에 삽입됩니다" msgid "Bottom shell layers" msgstr "하단 쉘 레이어" @@ -9532,7 +11217,7 @@ msgstr "하단 쉘 레이어" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "하단 표면을 포함한 하단 쉘의 꽉찬 레이어 수입니다. 이 값으로 계산한 두께가 하" "단 쉘 두께보다 얇으면 하단 쉘 레이어가 증가합니다" @@ -9544,8 +11229,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "하단 쉘 레이어로 계산된 두께가 이 값보다 얇은 경우 슬라이싱할 때 하단 꽉찬 레" "이어의 수가 증가합니다. 이렇게 하면 레이어 높이가 작을 때 쉘이 너무 얇아지는 " @@ -9556,22 +11241,54 @@ msgid "Apply gap fill" msgstr "간격 채우기 적용" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"선택한 표면에 대해 간격 채우기를 활성화합니다. 채워질 최소 간격 길이는 아래" +"선택한 솔리드 서페이스에 갭 채우기를 활성화합니다. 채울 최소 간격 길이는 아래" "의 작은 간격 필터링 옵션에서 제어할 수 있습니다.\n" "\n" "옵션:\n" -"1. 어디에서나: 상단, 하단 및 내부 솔리드 표면에 간격 채우기를 적용합니다.\n" -"2. 상단 및 하단 표면: 상단 및 하단 표면에만 간격 채우기를 적용합니다.\n" -"3. 아무데도: 간격 채우기를 비활성화합니다.\n" +"1. 모든곳: 최대 강도를 위해 상단, 하단 및 내부 솔리드 표면에 갭 채우기를 적용" +"합니다\n" +"2. 상단 및 하단 표면: 상단 및 하단 표면에만 갭 채우기를 적용하여 프린트 속도 " +"균형을 맞추고, 솔리드 인필의 돌출 가능성을 줄이며, 상단 및 하단 표면에 핀홀 " +"틈이 없도록 합니다\n" +"3. 미사용: 모든 솔리드 인필 영역에 대해 갭 채우기를 사용하지않습니다.\n" +"\n" +"기존 경계 생성기를 사용하는 경우 경계 사이에 전체 너비 선이 맞지 않는 경우 경" +"계 사이에 갭 채우기가 생성될 수도 있습니다. 해당 경계선 간격 채우기는 이 설정" +"으로 제어되지 않습니다.\n" +"\n" +"기존 경계선 생성기를 포함한 모든 간격 채우기를 제거하려면 필터에서 작은 간격 " +"값을 999999와 같이 큰 숫자로 설정하세요.\n" +"\n" +"그러나 경계선 사이의 간격 채우기는 모델의 강도에 영향을 미치므로 권장되지 않" +"습니다. 경계선 사이에 과도한 갭 채우기가 생성되는 모델의 경우 아라크네 벽 생" +"성기로 전환하고 이 옵션을 사용하여 미려한 상단 및 하단 표면 갭 채우기 생성 여" +"부를 제어하는 것이 더 나은 옵션이 될 수 있습니다" msgid "Everywhere" msgstr "모든곳" @@ -9580,118 +11297,309 @@ msgid "Top and bottom surfaces" msgstr "상단 및 하단 표면" msgid "Nowhere" -msgstr "아무데도" +msgstr "미사용" -msgid "Force cooling for overhang and bridge" -msgstr "돌출부 및 브릿지 강제 냉각" +msgid "Force cooling for overhangs and bridges" +msgstr "오버행 및 브릿지에 대한 강제 냉각" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"냉각 향상을 위해 돌출부 및 브릿지에 대한 출력물 냉각 팬 속도를 최적화하려면 " -"이 옵션을 활성화합니다" +"이 옵션을 활성화하면 오버행, 내부 및 외부 브릿지에 대한 부품 냉각 팬 속도를 " +"조정할 수 있습니다. 이러한 기능에 맞게 팬 속도를 설정하면 전반적인 출력 품질" +"을 개선하고 뒤틀림을 줄일 수 있습니다." -msgid "Fan speed for overhang" -msgstr "돌출부 팬 속도" +msgid "Overhangs and external bridges fan speed" +msgstr "오버행 및 외부 브릿지 팬 속도" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"돌출부 정도가 큰 브릿지나 돌출부 벽을 출력할 때 출력물 냉각 팬을 이 속도로 강" -"제합니다. 돌출부와 브릿지를 강제 냉각하면 이러한 부품의 품질이 향상될 수 있습" -"니다" +"오버행 임계값이 위의 '오버행 냉각 임계값' 파라미터에 설정된 값을 초과하는 브" +"릿지 또는 오버행 벽을 출력할 때 이 부품 냉각 팬 속도를 사용합니다. 오버행 및 " +"브릿지에 대한 냉각을 강화하면 이러한 기능의 전반적인 출력 품질이 향상될 수 있" +"습니다.\n" +"\n" +"이 팬 속도는 위에 설정된 최소 팬 속도 임계값에 의해 하단에 고정된다는 점에 유" +"의하세요. 또한 최소 레이어 시간 임계값이 충족되지 않으면 최대 팬 속도 임계값" +"까지 상향 조정됩니다." -msgid "Cooling overhang threshold" -msgstr "돌출부 냉각 임계값" +msgid "Overhang cooling activation threshold" +msgstr "오버행 냉각 활성화 임계값" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"출력물의 돌출부 정도가 이 값을 초과하면 냉각 팬이 특정 속도가 되도록 강제합니" -"다. 지지대가 없는 하단 레이어 선 너비의 백분율로 표시됩니다. 0은 돌출부 정도" -"에 관계없이 모든 외벽을 강제 냉각한다는 의미입니다" +"오버행이 지정된 임계값을 초과하면 아래에 설정된 '오버행 팬 속도'로 냉각 팬이 " +"강제로 작동합니다. 이 임계값은 백분율로 표시되며, 각 선 너비에서 그 아래 레이" +"어가 지원하지 않는 부분을 나타냅니다. 이 값을 0%로 설정하면 돌출 정도에 관계" +"없이 모든 외벽에 대해 냉각 팬이 강제로 작동합니다." -msgid "Bridge infill direction" -msgstr "브릿지 채우기 방향" +msgid "External bridge infill direction" +msgstr "외부 브릿지 채우기 방향" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "브릿지 출력 각도 재정의. 0°으로 두면 브릿지 출력 각도가 자동으로 계산됩니다. " "그렇지 않으면 제공된 각도가 외부 브릿지 출력에 사용됩니다. 0도에는 180°를 사" "용합니다." -msgid "Bridge density" -msgstr "브릿지 밀도" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" -"외부 브릿지의 밀도. 100%는 단단한 브릿지를 의미합니다. 기본값은 100%입니다." - -msgid "Bridge flow ratio" -msgstr "브릿지 유량 비율" +msgid "Internal bridge infill direction" +msgstr "내부 브릿지 채우기 방향" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" -msgstr "이 값을 약간(예: 0.9) 줄여 브릿지의 압출량을 줄여 처짐을 개선합니다" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" +"내부 브릿지 각도 오버라이드. 0으로 두면 브릿지 각도가 자동으로 계산됩니다. 그" +"렇지 않으면 제공된 각도가 내부 브릿지에 사용됩니다. 0 각도는 180°를 사용합니" +"다.\n" +"\n" +"특정 모델이 필요하지 않는 한 0으로 두는 것이 좋습니다." + +msgid "External bridge density" +msgstr "외부 브릿지 밀도" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"외부 브릿지 라인의 밀도(간격)를 제어합니다. 100%는 솔리드 브릿지를 의미합니" +"다. 기본값은 100%입니다.\n" +"\n" +"밀도가 낮은 외부 브릿지는 돌출된 브릿지 주변에 공기가 순환할 수 있는 공간이 " +"더 많아져 냉각 속도가 향상되므로 안정성을 개선하는 데 도움이 될 수 있습니다." + +msgid "Internal bridge density" +msgstr "내부 브릿지 밀도" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"내부 브릿지 라인의 밀도(간격)를 제어합니다. 100%는 솔리드 브릿지를 의미합니" +"다. 기본값은 100%입니다.\n" +"\n" +" 내부 브릿지의 밀도가 낮으면 돌출된 브릿지 주변에 공기가 순환할 수 있는 공간" +"이 더 많아져 냉각 속도가 향상되므로 상단 표면 필링을 줄이고 내부 브릿지 안정" +"성을 개선하는 데 도움이 됩니다.\n" +"\n" +"이 옵션은 특히 두 번째 내부 브릿지 오버 인필 옵션과 함께 사용하면 솔리드 인필" +"이 압출되기 전에 내부 브릿지 구조를 더욱 개선할 수 있습니다." + +msgid "Bridge flow ratio" +msgstr "브릿지 압출량 비율" + +msgid "" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"이 값을 약간 낮추면(예: 0.9) 브릿지의 재질 양을 줄여 처짐을 개선할 수 있습니" +"다.\n" +"\n" +"실제 사용되는 브릿지 압출량은 이 값에 필라멘트 압출량 비율을 곱하여 계산되" +"며, 설정된 경우 객체의 압출량 비율을 곱합니다." msgid "Internal bridge flow ratio" -msgstr "내부 브릿지 유량 비율" +msgstr "내부 브릿지 압출량 비율" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"이 값은 내부 브릿지 레이어의 두께를 결정합니다. 이것은 드문 채우기 위의 첫 번" -"째 레이어입니다. 드문 채우기보다 표면 품질을 향상시키려면 이 값을 약간(예: " -"0.9) 줄입니다." +"이 값은 내부 브릿지 레이어의 두께를 결정합니다. 이 레이어는 스파스 인필 위에 " +"있는 첫 번째 레이어입니다. 이 값을 약간 낮추면(예: 0.9) 스파스 인필에 대한 표" +"면 품질을 향상시킬 수 있습니다.\n" +"\n" +"사용되는 실제 내부 브릿지 흐름은 이 값에 브릿지 흐름 비율, 필라멘트 흐름 비" +"율, 설정된 경우 객체의 흐름 비율을 곱하여 계산됩니다." msgid "Top surface flow ratio" -msgstr "상단 표면 유량 비율" +msgstr "상단 표면 압출량 비율" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"이 값은 상단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다. 부드러운 표면 마" -"감을 위해 약간 줄여도 됩니다" +"이 요소는 상단 솔리드 인필의 재료 양에 영향을 줍니다. 표면 마감을 매끄럽게 하" +"려면 이 값을 약간 낮출 수 있습니다.\n" +"\n" +"사용되는 실제 상단 표면 압출량은 이 값에 필라멘트 압출량 비율을 곱하여 계산되" +"며, 설정된 경우 객체의 압출량 비율을 곱합니다." msgid "Bottom surface flow ratio" -msgstr "하단 표면 유량 비율" +msgstr "하단 표면 압출량 비율" -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "이 값은 하단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"이 요소는 바닥 솔리드 인필의 재료 양에 영향을 줍니다.\n" +"\n" +"사용되는 실제 바닥 솔리드 인필 압출량은 이 값에 필라멘트 압출량 비율을 곱하" +"여 계산되며, 설정된 경우 객체의 압출량 비율을 곱합니다." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Precise wall" msgstr "정밀한 벽" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 향상" -"시킵니다.\n" -"참고: 이 설정은 벽 시퀀스가 내부-외부로 구성된 경우에만 적용됩니다" msgid "Only one wall on top surfaces" msgstr "상단 표면에 단일 벽 생성" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "평평한 상단 표면에 하나의 벽만 사용하여 상단 표면 패턴에 더 많은 공간을 제공" "합니다" @@ -9713,7 +11621,7 @@ msgstr "" "상단 표면을 출력해야 하고 부분적으로 다른 레이어로 덮여 있는 경우 너비가 이 " "값 미만인 상단 레이어에서는 고려되지 않습니다. 이는 둘레로만 덮여야 하는 표면" "에서 '상단 둘레 하나'가 발동되지 않도록 하는 데 유용할 수 있습니다. 이 값은 " -"압출 너비의 mm 또는 % o로 설정됩니다.\n" +"압출 너비의 mm 또는 %로 설정됩니다.\n" "경고: 활성화된 경우, 의도치 않은 형상이 생성되는건 다음 레이어에 문자와 같은 " "일부 얇은 형상이 있기 때문입니다. 이러한 형상을 제거하려면 이 값을 0으로 설정" "하세요." @@ -9723,44 +11631,44 @@ msgstr "하단 표면에 단일 벽 생성" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "첫 레이어에 하나의 벽만 사용하여 하단 표면 패턴에 더 많은 공간을 제공합니다" msgid "Extra perimeters on overhangs" -msgstr "돌출부 추가 둘레" +msgstr "오버행 추가 둘레" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"가파른 돌출부와 브릿지를 고정할 수 없는 지역 위에 추가 둘레 경로를 만듭니다. " +"가파른 오버행와 브릿지를 고정할 수 없는 지역 위에 추가 둘레 경로를 만듭니다." -msgid "Reverse on odd" -msgstr "홀수에 반전" +msgid "Reverse on even" +msgstr "짝수에 반전" msgid "Overhang reversal" -msgstr "돌출부 반전" +msgstr "오버행 반전" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"역방향 돌출부 위에 부분이 있는 돌출 둘레홀수 레이어의 방향입니다. 이 교대 패" -"턴은 크게 향상될 수 있습니다.가파른 돌출부.\n" +"짝수 레이어에서 반대 방향으로 오버행 위에 부분이 있는 둘레를 돌출시킵니다. 이" +"러한 교대 패턴은 가파른 오버행을 대폭 개선할 수 있습니다.\n" "\n" -"이 설정은 또한 감소로 인한 부품 뒤틀림을 줄이는 데 도움이 될 수 있습니다.부" -"분 벽의 응력." +"이 설정은 부품 벽의 응력 감소로 인한 부품 뒤틀림을 줄이는 데도 도움이 될 수 " +"있습니다." msgid "Reverse only internal perimeters" msgstr "내부 둘레만 반전" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9769,21 +11677,20 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"내부 경계에만 역방향 경계 논리를 적용합니다. \n" +"내부 경계에만 역방향 경계 논리를 적용합니다.\n" "\n" -"이 설정은 부품 응력이 이제 분산되어 있으므로 부품 응력을 크게 줄여줍니다.교" -"대 방향. 이렇게 하면 부품 뒤틀림도 줄어들고 동시에 외벽 품질 유지. 이 기능은 " -"워프에 매우 유용할 수 있습니다.ABS/ASA와 같은 취약한 소재와 TPU 및 탄성 필라" -"멘트에도 사용 가능실크 PLA. 또한 부동 영역의 뒤틀림을 줄이는 데 도움이 될 수 " -"있습니다.지원합니다.\n" +"이 설정을 사용하면 부품 응력이 이제 교대로 분산되므로 부품 응력이 크게 줄어듭" +"니다. 이렇게 하면 부품 뒤틀림이 줄어들면서 외부 벽 품질도 유지됩니다. 이 기능" +"은 ABS/ASA와 같이 뒤틀리기 쉬운 소재와 TPU 및 Silk PLA와 같은 탄성 필라멘트" +"에 매우 유용할 수 있습니다. 또한 서포트 위에 떠 있는 영역의 뒤틀림을 줄이는 " +"데 도움이 될 수 있습니다.\n" "\n" -"이 설정을 가장 효과적으로 사용하려면 다음을 설정하는 것이 좋습니다.모든 내부 " -"벽이 교대로 출력되도록 임계값을 0으로 역방향오버행 정도에 관계없이 홀수 레이" -"어의 방향입니다." +"이 설정이 가장 효과적이려면 모든 내부 벽이 돌출 정도에 관계없이 균일한 레이어" +"에서 교대로 출력되도록 역방향 임계값을 0으로 설정하는 것이 좋습니다." msgid "Bridge counterbore holes" msgstr "브릿지 카운터보어 구멍" @@ -9791,18 +11698,18 @@ msgstr "브릿지 카운터보어 구멍" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" -"이 옵션은 카운터보어 구멍에 대한 브릿지를 생성하여 지지대 없이 출력할 수 있도" +"이 옵션은 카운터보어 구멍에 대한 브릿지를 생성하여 서포트 없이 출력할 수 있도" "록 합니다. 사용 가능한 모드는 다음과 같습니다.\n" "1. 없음: 브릿지가 생성되지 않습니다.\n" -"2. 부분적으로 브릿지됨: 지원되지 않는 영역의 일부만 브릿지됩니다.\n" -"3. 희생 레이어: 전체 희생 브릿지 레이어가 생성됩니다." +"2. 부분적 브릿지: 지원되지 않는 영역의 일부만 브릿지됩니다.\n" +"3. 희생층: 전체 희생 브릿지 레이어가 생성됩니다." msgid "Partially bridged" -msgstr "부분적으로 브릿지" +msgstr "부분적 브릿지" msgid "Sacrificial layer" msgstr "희생층" @@ -9811,66 +11718,83 @@ msgid "Reverse threshold" msgstr "반전 임계값" msgid "Overhang reversal threshold" -msgstr "돌출부 반전 임계값" +msgstr "오버행 반전 임계값" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"반전이 유용한 것으로 간주되기 위해 필요한 오버행의 수(mm)입니다. 둘레 너비의 " -"%일 수 있습니다.\n" -"값 0은 관계없이 모든 홀수 레이어에서 반전을 활성화합니다." - -msgid "Classic mode" -msgstr "클래식 모드" - -msgid "Enable this option to use classic mode" -msgstr "클래식 모드를 사용하려면 이 옵션을 활성화합니다" +"반전이 유용한 것으로 간주되려면 오버행이 몇 mm가 되어야 합니다. 둘레 폭을 % o" +"으로 설정할 수 있습니다.\n" +"값이 0이면 모든 짝수 레이어에 관계없이 반전이 활성화됩니다.\n" +"돌출 벽 감지가 활성화되지 않은 경우 이 옵션은 무시되고 모든 짝수 레이어에서 " +"반전이 수행됩니다." msgid "Slow down for overhang" -msgstr "돌출부에서 감속" +msgstr "오버행에서 감속" -msgid "Enable this option to slow printing down for different overhang degree" -msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다" +msgid "Enable this option to slow printing down for different overhang degree." +msgstr "오버행 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다" msgid "Slow down for curled perimeters" -msgstr "꺾여 있는 둘레에서 감속" +msgstr "구부러진 둘레에서 감속" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"꺾여 있는 둘레가 있을 수 있는 영역에서 출력 속도를 낮추려면 이 옵션을 활성화" -"하세요" msgid "mm/s or %" msgstr "mm/s 또는 %" -msgid "External" -msgstr "외부" - -msgid "Speed of bridge and completely overhang wall" -msgstr "브릿지와 돌출부 벽의 속도" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"외부에서 볼 수 있는 브릿지 돌출 속도입니다.\n" +"\n" +"또한, 구부러진 둘레에 대한 속도 저하가 비활성화되거나 클래식 오버행 모드가 활" +"성화된 경우 브릿지의 일부이든 오버행이든 상관없이 오버행 벽의 출력 속도는 " +"13% 미만으로 지원됩니다." msgid "Internal" msgstr "내부" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"내부 브릿지 속도. 값을 백분율로 표시하면 외부 브릿지 속도를 기준으로 계산됩니" +"내부 브릿지의 속도. 값을 백분율로 표현하면 bridge_speed를 기준으로 계산됩니" "다. 기본값은 150%입니다." msgid "Brim width" msgstr "브림 너비" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "모델과 가장 바깥쪽 브림 선까지의 거리" msgid "Brim type" @@ -9878,19 +11802,19 @@ msgstr "브림 유형" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "모델의 외부 그리고/또는 내부에서 브림의 생성을 제어합니다. 자동은 브림너비가 " "자동으로 분석 및 계산됨을 의미합니다." msgid "Brim-object gap" -msgstr "브림-개체 간격" +msgstr "브림-객체 간격" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"가장 안쪽 브림 라인과 개체 사이에 간격을 주어 쉽게 브림을 제거 할 수 있게 합" +"가장 안쪽 브림 라인과 객체 사이에 간격을 주어 쉽게 브림을 제거 할 수 있게 합" "니다" msgid "Brim ears" @@ -9903,8 +11827,8 @@ msgid "Brim ear max angle" msgstr "브림 귀 최대 각도" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "브림 귀가 나타날 수 있는 최대 각도.\n" @@ -9915,46 +11839,59 @@ msgid "Brim ear detection radius" msgstr "브림 귀 감지 반경" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "날카로운 각도를 감지하기 전에 형상이 무시됩니다. 이 매개변수는 무시하는 형상" "의 최소 길이를 나타냅니다.\n" "0으로 비활성화합니다" -msgid "Compatible machine" -msgstr "호환 장치" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "상향 호환 장치" -msgid "Compatible machine condition" -msgstr "호환 장치 상태" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "호환 프로세스 사전설정" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"활성 프린터 프로필의 구성 값을 사용하는 불리언 표현식입니다. 이 표현식이 true" +"로 평가되면 이 프로필은 활성 프린터 프로필과 호환되는 것으로 간주됩니다." -msgid "Compatible process profiles condition" -msgstr "호환 프로세스 사전설정 상태" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" -msgstr "출력순서, 레이어별 또는 개체별" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"활성 출력 프로필의 구성 값을 사용하는 불리언 표현식입니다. 이 표현식이 true" +"로 평가되면 이 프로필은 활성 출력 프로필과 호환되는 것으로 간주됩니다." + +msgid "Print sequence, layer by layer or object by object." +msgstr "출력순서, 레이어별 또는 객체별" msgid "By layer" msgstr "레이어별" msgid "By object" -msgstr "개체별" +msgstr "객체별" msgid "Intra-layer order" msgstr "레이어 내 순서" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "단일 레이어 내의 출력 순서" msgid "As object list" -msgstr "개체 목록으로" +msgstr "객체 목록으로" msgid "Slow printing down for better layer cooling" msgstr "레이어 냉각 향상을 위한 감속" @@ -9963,7 +11900,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "이 옵션을 활성화하여 최종 레이어 시간이 \"최대 팬 속도 임계값\" 의 \"레이어 " "시간\" 임계값보다 짧지 않도록 출력 속도를 낮추어 레이어를 더 오랫동안 냉각할 " @@ -9974,65 +11911,62 @@ msgstr "일반 출력" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "초기 레이어를 제외한 모든 일반 출력 및 이동의 기본 가속" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "기본 필라멘트 사전설정" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "이 장치 사전설정으로 전환할 때의 기본 필라멘트 사전설정" msgid "Default process profile" msgstr "기본 프로세스 사전설정" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "이 장치 사전설정으로 전환할 때의 기본 프로세스 사전설정" msgid "Activate air filtration" msgstr "공기 여과 활성화" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" -msgstr "더 나은 공기 여과를 위해 활성화하세요. G코드 명령: M106 P3 S(0-255)" +msgstr "더 나은 공기 여과를 위해 활성화하세요. Gcode 명령: M106 P3 S(0-255)" msgid "Fan speed" msgstr "팬 속도" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -"출력 중 배기 팬 속도. 이 속도는 필라멘트 사용자 정의 G코드의 속도를 덮어씁니" +"출력 중 배기 팬 속도. 이 속도는 필라멘트 사용자 정의 Gcode의 속도를 덮어씁니" "다" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "출력 완료 후 배기 팬 속도" msgid "No cooling for the first" msgstr "처음에는 냉각이 적용되지 않습니다" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "빌드 플레이트의 접착력 향상을 위해 첫 레이어부터 특정 레이어까지의 모든 냉각 " "팬을 정지합니다" msgid "Don't support bridges" -msgstr "브릿지에서 지지대 사용안함" +msgstr "브릿지에서 서포트 사용안함" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" -"지지대를 크게 만드는 전체 브릿지 영역에 지지대를 사용하지 않습니다. 브릿지는 " -"일반적으로 매우 길지 않은 경우 지지대 없이 직접 출력할 수 있습니다" +"서포트를 크게 만드는 전체 브릿지 영역에 서포트를 사용하지 않습니다. 브릿지는 " +"일반적으로 매우 길지 않은 경우 서포트 없이 직접 출력할 수 있습니다." -msgid "Thick bridges" -msgstr "두꺼운 브릿지" +msgid "Thick external bridges" +msgstr "두꺼운 외부 브릿지" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10055,63 +11989,129 @@ msgstr "" "기능을 켜두세요. 하지만 다음과 같은 경우에는 끄는 것을 고려해 보세요.큰 노즐" "을 사용합니다." -msgid "Don't filter out small internal bridges (beta)" -msgstr "작은 내부 브릿지를 필터링하지 마세요(베타)" +msgid "Extra bridge layers (beta)" +msgstr "추가 브릿지 레이어(베타)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" +"이 옵션을 사용하면 내부 및/또는 외부 브릿지 위에 추가 브릿지 레이어를 생성할 " +"수 있습니다.\n" +"\n" +"추가 브릿지 레이어는 솔리드 인필이 더 잘 지원되므로 브릿지 모양과 안정성을 개" +"선하는 데 도움이 됩니다. 이 옵션은 브릿지와 솔리드 인필 속도가 크게 달라지는 " +"고속 프린터에서 특히 유용합니다. 브릿지 레이어가 추가되면 상단 표면의 필로우" +"가 줄어들고 외부 브릿지 레이어가 주변 경계와 분리되는 현상이 줄어듭니다.\n" +"\n" +"일반적으로 슬라이스 모델에 특별한 문제가 발견되지 않는 한 최소한 '외부 브릿" +"지 전용'으로 설정하는 것이 좋습니다.\n" +"\n" +"옵션\n" +"1. 비활성화 - 두 번째 브릿지 레이어를 생성하지 않습니다. 기본값이며 호환성을 " +"위해 설정됩니다.\n" +"2. 외부 브릿지만 - 외부를 향한 브릿지에 대해서만 두 번째 브릿지 레이어를 생성" +"합니다. 설정된 둘레 수보다 짧거나 좁은 작은 다리는 두 번째 브릿지 레이어의 이" +"점이 없으므로 건너뛰게 됩니다. 두 번째 브릿지 레이어가 생성되면 첫 번째 브릿" +"지 레이어와 평행하게 돌출되어 브릿지 강도를 강화합니다.\n" +"3. 내부 브릿지 전용 - 스파스 인필 위에 있는 내부 브릿지에 대해서만 두 번째 브" +"릿지 레이어를 생성합니다. 내부 브릿지는 모델의 최상위 셸 레이어 수에 포함된다" +"는 점에 유의하세요. 두 번째 내부 브릿지 레이어는 가능한 한 첫 번째 브릿지 레" +"이어에 수직에 가깝게 돌출됩니다. 동일한 섬에 다양한 다리 각도를 가진 여러 영" +"역이 있는 경우 해당 섬의 마지막 영역이 각도 참조로 선택됩니다.\n" +"4. 모두 적용 - 내부 및 외부를 향한 브릿지 모두에 대한 두 번째 브릿지 레이어" +"를 생성합니다.\n" + +msgid "Disabled" +msgstr "비활성" + +msgid "External bridge only" +msgstr "외부 브릿지 전용" + +msgid "Internal bridge only" +msgstr "내부 브릿지 전용" + +msgid "Apply to all" +msgstr "모두 적용" + +msgid "Filter out small internal bridges" +msgstr "작은 내부 브릿지 필터링" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" "By default, small internal bridges are filtered out and the internal solid " "infill is printed directly over the sparse infill. This works well in most " "cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" -"이 옵션은 심하게 기울어지거나 곡선이 있는 모델의 상단 표면이 눌리는 현상을 줄" -"이는 데 도움이 될 수 있습니다.\n" +"이 옵션을 사용하면 심하게 기울어지거나 구부러진 모델에서 상단 표면의 필링을 " +"줄일 수 있습니다.\n" "\n" -"기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 채우기는 희박한 채우기 " -"위에 직접 출력됩니다. 이는 대부분의 경우에 잘 작동하여 상단 표면 품질을 크게 " -"저하시키지 않고 출력 속도를 높입니다.\n" +"기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 인필은 스파스 인필 위에 " +"직접 출력됩니다. 이 방법은 대부분의 경우 잘 작동하여 표면 품질을 크게 저하시" +"키지 않으면서 출력 속도를 높일 수 있습니다.\n" "\n" -"그러나 특히 너무 낮은 희박 채우기 밀도가 사용되는 심하게 기울어지거나 곡선 모" -"델에서는 지지되지 않는 고체 채우기가 말려 베개 현상이 발생할 수 있습니다.\n" +"그러나 경사가 심하거나 곡선형 모델, 특히 너무 낮은 스파스 인필 밀도를 사용하" +"는 경우 지원되지 않는 솔리드 인필이 말려서 필로우가 발생할 수 있습니다.\n" "\n" -"이 옵션을 활성화하면 약간 지원되지 않는 내부 솔리드 채우기 위에 내부 브릿지 " -"레이어가 출력됩니다. 아래 옵션은 필터링 양, 즉 생성된 내부 브릿지 양을 제어합" -"니다.\n" +"필터링을 제한하거나 필터링을 사용하지 않도록 설정하면 약간 지원되지 않는 내" +"부 솔리드 인필 위에 내부 브릿지 레이어가 출력됩니다. 아래 옵션은 필터링의 민" +"감도, 즉 내부 브릿지가 생성되는 위치를 제어합니다.\n" "\n" -"비활성화됨 - 이 옵션을 비활성화합니다. 이는 기본 동작이며 대부분의 경우 잘 작" -"동합니다.\n" +"1. 필터 - 이 옵션을 활성화합니다. 기본 동작이며 대부분의 경우 잘 작동합니" +"다.\n" "\n" -"제한된 필터링 - 불필요한 내부 브릿지 생성을 피하면서 크게 기울어진 표면에 내" -"부 브릿지를 생성합니다. 이는 가장 어려운 모델에 적합합니다.\n" +"2. 제한된 필터링 - 불필요한 브릿지를 피하면서 심하게 기울어진 표면에 내부 브" +"릿지를 만듭니다. 이 옵션은 대부분의 어려운 모델에 적합합니다.\n" "\n" -"필터링 없음 - 잠재적인 모든 내부 돌출부에 내부 브릿지를 생성합니다. 이 옵션" -"은 심하게 기울어진 상단 표면 모델에 유용합니다. 그러나 대부분의 경우 불필요" -"한 브릿지가 너무 많이 생성됩니다." - -msgid "Disabled" -msgstr "비활성됨" +"3. 필터링 없음 - 모든 잠재적인 내부 오버행에 내부 브릿지를 생성합니다. 이 옵" +"션은 경사가 심한 윗면 모델에 유용하지만, 대부분의 경우 불필요한 브릿지가 너" +"무 많이 생성됩니다." msgid "Limited filtering" msgstr "제한된 필터링" @@ -10127,27 +12127,27 @@ msgid "" "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"지지대가 필요하지 않은 브릿지의 최대 길이. 모든 브릿지에 지지대를 생성하려면 " -"0으로 설정하고 브릿지에 지지대를 생성하지 않으려면 매우 큰 값으로 설정합니다." +"서포트가 필요하지 않은 브릿지의 최대 길이. 모든 브릿지에 서포트를 생성하려면 " +"0으로 설정하고 브릿지에 서포트를 생성하지 않으려면 매우 큰 값으로 설정합니다." msgid "End G-code" -msgstr "종료 G코드" +msgstr "종료 Gcode" -msgid "End G-code when finish the whole printing" -msgstr "전체 출력이 끝날때의 종료 G코드" +msgid "End G-code when finishing the entire print." +msgstr "출력이 종료될 때의 Gcode" -msgid "Between Object Gcode" -msgstr "개체 사이의 G코드" +msgid "Between Object G-code" +msgstr "객체 사이의 Gcode" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"개체 사이에 G코드를 삽입하세요. 이 매개변수는 개체별 출력을 사용할 때만 적용" +"객체 사이에 Gcode를 삽입하세요. 이 매개변수는 객체별 출력을 사용할 때만 적용" "됩니다" -msgid "End G-code when finish the printing of this filament" -msgstr "이 필라멘트의 출력이 끝날때의 종료 G코드" +msgid "End G-code when finishing the printing of this filament." +msgstr "이 필라멘트의 출력이 끝날때의 종료 Gcode" msgid "Ensure vertical shell thickness" msgstr "수직 쉘 두께 확보" @@ -10166,7 +12166,7 @@ msgstr "" "어)를 보장합니다.\n" "없음: 솔리드 채우기가 어디에도 추가되지 않습니다. 주의: 모델에 경사면이 있는 " "경우 이 옵션을 주의해서 사용하십시오.\n" -"중요 사항: 벽에 견고한 채우기를 추가하지 마십시오.\n" +"중요한 것만: 벽에 견고한 채우기를 추가하지 마십시오.\n" "보통: 경사가 심한 표면에만 견고한 채우기를 추가합니다.\n" "모두: 적합한 모든 경사면에 대해 솔리드 채우기를 추가합니다.\n" "기본값은 모두입니다." @@ -10180,24 +12180,24 @@ msgstr "보통" msgid "Top surface pattern" msgstr "상단 표면 패턴" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "상단 표면 채우기의 선 패턴" -msgid "Concentric" -msgstr "동심" - -msgid "Rectilinear" -msgstr "직선" - msgid "Monotonic" msgstr "단조" msgid "Monotonic line" msgstr "단조선" +msgid "Rectilinear" +msgstr "직선" + msgid "Aligned Rectilinear" msgstr "정렬된 직선" +msgid "Concentric" +msgstr "동심" + msgid "Hilbert Curve" msgstr "힐베르트 곡선" @@ -10210,7 +12210,7 @@ msgstr "팔각 나선형" msgid "Bottom surface pattern" msgstr "하단 표면 패턴" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "브릿지 채우기가 아닌 바닥면 채우기의 선 패턴" msgid "Internal solid infill pattern" @@ -10252,17 +12252,17 @@ msgid "Small perimeters threshold" msgstr "작은 둘레 임계값" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "작은 둘레 길이에 대한 임계값을 설정합니다. 기본 임계값은 0mm입니다" msgid "Walls printing order" msgstr "벽 출력 순서" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10272,19 +12272,17 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"내부(내벽) 및 외부(외벽)의 출력 순서를 지정합니다.\n" +"내벽 및 외벽의 출력 순서를 지정합니다.\n" "\n" -"돌출부를 가장 잘 출력하려면 내부/외부를 사용합니다. 이는 돌출된 벽이 출력하" +"오버행을 가장 잘 출력하려면 내부/외부를 사용합니다. 이는 돌출된 벽이 출력하" "는 동안 인접한 경계에 부착될 수 있기 때문입니다. 그러나 이 옵션을 사용하면 외" "부 경계가 내부 경계에 눌려 변형되므로 표면 품질이 약간 저하됩니다.\n" "\n" @@ -10297,9 +12295,7 @@ msgstr "" "\n" "내부/외부/내부 옵션과 동일한 외벽 품질 및 치수 정확도 이점을 얻으려면 외부/내" "부를 사용하세요. 그러나 새 레이어의 첫 번째 돌출이 보이는 표면에서 시작되므" -"로 Z 심이 덜 일관되게 나타납니다.\n" -"\n" -" " +"로 Z 심이 덜 일관되게 나타납니다." msgid "Inner/Outer" msgstr "내벽/외벽" @@ -10318,16 +12314,16 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" -"벽/채우기 순서. 확인란을 선택 취소하면 벽이 먼저 인쇄되며 이는 대부분의 경우 " +"벽/채우기 순서. 확인란을 선택 취소하면 벽이 먼저 출력되며 이는 대부분의 경우 " "가장 잘 작동합니다.\n" "\n" -"충전재를 먼저 인쇄하면 벽에 접착할 인접 충전재가 있으므로 돌출부가 심한 경우 " -"도움이 될 수 있습니다. 그러나 충전재는 인쇄된 벽이 부착된 부분을 약간 밀어내" +"충전재를 먼저 출력하면 벽에 접착할 인접 충전재가 있으므로 오버행이 심한 경우 " +"도움이 될 수 있습니다. 그러나 충전재는 출력된 벽이 부착된 부분을 약간 밀어내" "어 외부 표면 마감이 더 나빠집니다. 또한 충전재가 부품의 외부 표면을 통해 빛" "날 수도 있습니다." @@ -10339,16 +12335,16 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" "위에서 아래를 내려다볼 때 벽 루프가 돌출되는 방향입니다.\n" "\n" -"홀수에 반전 설정이 활성화되지 않은 경우 기본적으로 모든 벽은 시계 반대 방향으" -"로 출력됩니다. 이것을 Auto 이외의 옵션으로 설정하면 홀수에 반전 설정과 관계없" -"이 벽 방향이 강제됩니다.\n" +"기본적으로 짝수에 반전이 활성화되지 않은 한 모든 벽은 시계 반대 방향으로 돌출" +"됩니다. Auto 이외의 옵션으로 설정하면 짝수에 반전 관계없이 벽 방향이 강제됩니" +"다.\n" "\n" "나선형 꽃병 모드가 활성화된 경우 이 옵션은 비활성화됩니다." @@ -10365,7 +12361,7 @@ msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"노즐 끝에서 하부 레일까지의 거리. 개체별 출력에서 충돌 방지에 사용됩니다." +"노즐 끝에서 하부 레일까지의 거리. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "Height to lid" msgstr "덮개까지의 높이" @@ -10373,12 +12369,12 @@ msgstr "덮개까지의 높이" msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." -msgstr "노즐 끝에서 덮개까지의 거리. 개체별 출력에서 충돌 방지에 사용됩니다." +msgstr "노즐 끝에서 덮개까지의 거리. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." -msgstr "압출기 주변의 회피 반경. 개체별 출력에서 충돌 방지에 사용됩니다." +msgstr "압출기 주변의 회피 반경. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "Nozzle height" msgstr "노즐 높이" @@ -10387,7 +12383,7 @@ msgid "The height of nozzle tip." msgstr "노즐 팁의 높이." msgid "Bed mesh min" -msgstr "배드 메쉬 최소" +msgstr "베드 메시 최소" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10399,9 +12395,9 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"이 옵션은 허용되는 배드 메쉬 영역의 최소 지점을 설정합니다. 프로브의 XY 옵셋" +"이 옵션은 허용되는 베드 메시 영역의 최소 지점을 설정합니다. 프로브의 XY 옵셋" "으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트" -"가 베드 영역 밖으로 나가지 않도록 하려면 베드 메쉬의 최소 및 최대 지점을 적절" +"가 베드 영역 밖으로 나가지 않도록 하려면 베드 메시의 최소 및 최대 지점을 적절" "하게 설정해야 합니다. Snapmaker Orca는 adaptive_bed_mesh_min/" "adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니" "다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 " @@ -10409,7 +12405,7 @@ msgstr "" "을 의미합니다." msgid "Bed mesh max" -msgstr "배드 메쉬 최대" +msgstr "베드 메시 최대" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10421,9 +12417,9 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"이 옵션은 허용되는 침대 메쉬 영역의 최대 지점을 설정합니다. 프로브의 XY 옵셋" +"이 옵션은 허용되는 침대 메시 영역의 최대 지점을 설정합니다. 프로브의 XY 옵셋" "으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트" -"가 베드 영역 밖으로 나가지 않도록 하려면 베드 메쉬의 최소 및 최대 지점을 적절" +"가 베드 영역 밖으로 나가지 않도록 하려면 베드 메시의 최소 및 최대 지점을 적절" "하게 설정해야 합니다. Snapmaker Orca는 adaptive_bed_mesh_min/" "adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니" "다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 " @@ -10441,53 +12437,72 @@ msgstr "" "며 X와 Y 모두에 대한 기본값은 50mm입니다." msgid "Mesh margin" -msgstr "메쉬 공간" +msgstr "메시 공간" msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." msgstr "" -"이 옵션은 적응형 배드 메시 영역이 XY 방향으로 확장되어야 하는 추가 거리를 결" +"이 옵션은 적응형 베드 메시 영역이 XY 방향으로 확장되어야 하는 추가 거리를 결" "정합니다." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "압출기 색상" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "UI의 시각적 도움말로만 사용됨" msgid "Extruder offset" msgstr "압출기 옵셋" msgid "Flow ratio" -msgstr "유량 비율" +msgstr "압출량 비율" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "재료는 용융 상태와 결정 상태 사이를 전환한 후 부피 변화가 있을 수 있습니다. " -"이 설정은 이 필라멘트 코드의 모든 압출 유량을 비례적으로 변경합니다. 권장 값 " -"범위는 0.95와 1.05 사이입니다. 약간의 과대압출 또는 과소압출이 있을 때 이 값" -"을 조정하여 평평한 표면을 얻을 수 있습니다" - -msgid "Enable pressure advance" -msgstr "프레셔 어드밴스 활성화" +"이 설정은 이 필라멘트 코드의 모든 압출 압출량을 비례적으로 변경합니다. 권장 " +"값 범위는 0.95와 1.05 사이입니다. 약간의 과대압출 또는 과소압출이 있을 때 이 " +"값을 조정하여 평평한 표면을 얻을 수 있습니다" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " -"enabled." +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." msgstr "" -"프레셔 어드밴스를 활성화합니다. 활성화되면 자동 보정 결과를 덮어씁니다." +"재료는 용융 상태와 결정 상태 사이를 전환한 후 부피 변화가 있을 수 있습니다. " +"이 설정은 Gcode에서 이 필라멘트의 모든 압출 흐름을 비례적으로 변경합니다. 권" +"장 값 범위는 0.95에서 1.05 사이입니다. 약간의 오버플로 또는 언더플로가 있는 " +"경우 이 값을 조정하여 멋진 평면을 얻을 수 있습니다.\n" +"\n" +"최종 객체 흐름 비율은 이 값에 필라멘트 흐름 비율을 곱한 값입니다." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" -msgstr "프레셔 어드밴스(Klipper)/리니어 어드밴스(Marlin)" +msgid "Enable pressure advance" +msgstr "PA 활성화" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " +"enabled." +msgstr "PA를 활성화합니다. 활성화되면 자동 보정 결과를 덮어씁니다." + +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "프레셔 어드밴스(Klipper) / 리니어 어드밴스(Marlin)" msgid "Enable adaptive pressure advance (beta)" -msgstr "적응형 압력 진행 활성화(베타)" +msgstr "적응형 PA 활성화(베타)" #, no-c-format, no-boost-format msgid "" @@ -10502,32 +12517,32 @@ msgid "" "your printer's extrusion system depending on the volumetric flow speed and " "acceleration it is printing at. Internally, it generates a fitted model that " "can extrapolate the needed pressure advance for any given volumetric flow " -"speed and acceleration, which is then emmited to the printer depending on " +"speed and acceleration, which is then emitted to the printer depending on " "the current print conditions.\n" "\n" -"When enabled, the pressure advance value above is overriden. However, a " -"reasonable default value above is strongly recomended to act as a fallback " +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " "and for when tool changing.\n" "\n" msgstr "" -"인쇄 속도가 증가하고(노즐을 통한 체적 흐름이 증가함) 가속도가 증가함에 따라 " +"출력 속도가 증가하고(노즐을 통한 압출 흐름이 증가함) 가속도가 증가함에 따라 " "일반적으로 유효 PA 값이 감소하는 것으로 관찰되었습니다. 이는 단일 PA 값이 모" "든 기능에 대해 항상 100% 최적인 것은 아니며 일반적으로 유속과 가속도가 낮은 " "기능에 너무 많은 돌출을 일으키지 않고 더 빠른 기능에 간격을 유발하지 않는 절" "충 값이 사용된다는 것을 의미합니다.\n" "\n" -"이 기능은 인쇄 중인 체적 흐름 속도와 가속도에 따라 프린터 압출 시스템의 반응" +"이 기능은 출력 중인 압출 흐름 속도와 가속도에 따라 프린터 압출 시스템의 반응" "을 모델링하여 이러한 제한 사항을 해결하는 것을 목표로 합니다. 내부적으로는 주" -"어진 체적 흐름 속도 및 가속도에 대해 필요한 압력 전진을 추정할 수 있는 적합 " -"모델을 생성하며, 이는 현재 인쇄 조건에 따라 프린터로 방출됩니다.\n" +"어진 압출 흐름 속도 및 가속도에 대해 필요한 PA를 추정할 수 있는 적합 모델을 " +"생성하며, 이는 현재 출력 조건에 따라 프린터로 방출됩니다.\n" "\n" -"활성화되면 위의 압력 전진 값이 무시됩니다. 그러나 대체 수단으로 사용하거나 도" -"구를 변경할 때 위의 합리적인 기본값을 사용하는 것이 좋습니다.\n" +"활성화되면 위의 PA 값이 무시됩니다. 그러나 대체 수단으로 사용하거나 도구를 변" +"경할 때 위의 합리적인 기본값을 사용하는 것이 좋습니다.\n" msgid "Adaptive pressure advance measurements (beta)" -msgstr "적응형 압력 사전 측정(베타)" +msgstr "적응형 PA 측정(베타)" -#, no-c-format, no-boost-format +#, fuzzy, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and " "accelerations they were measured at, separated by a comma. One set of values " @@ -10543,44 +12558,44 @@ msgid "" "external perimeters, the speed of the internal perimeters and the fastest " "feature print speed in your profile (usually its the sparse or solid " "infill). Then run them for the same speeds for the slowest and fastest print " -"accelerations,and no faster than the recommended maximum acceleration as " -"given by the klipper input shaper.\n" +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and " "acceleration. You can find the flow number by selecting flow from the color " "scheme drop down and move the horizontal slider over the PA pattern lines. " "The number should be visible at the bottom of the page. The ideal PA value " "should be decreasing the higher the volumetric flow is. If it is not, " -"confirm that your extruder is functioning correctly.The slower and with less " -"acceleration you print, the larger the range of acceptable PA values. If no " -"difference is visible, use the PA value from the faster test.3. Enter the " -"triplets of PA values, Flow and Accelerations in the text box here and save " -"your filament profile\n" -"\n" +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" msgstr "" -"압력 전진(PA) 값 세트, 측정된 체적 유량 속도 및 가속도를 쉼표로 구분하여 추가" -"합니다. 한 줄에 하나의 값 세트가 있습니다. 예를 들어\n" +"PA 값 세트, 측정된 압출 압출량 속도 및 가속도를 쉼표로 구분하여 추가합니다. " +"한 줄에 하나의 값 세트가 있습니다. 예를 들어\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "교정 방법:\n" -"1. 가속도 값당 최소 3개 속도에 대해 압력 전진 테스트를 실행합니다. 최소한 외" -"부 둘레의 속도, 내부 둘레의 속도 및 프로필의 가장 빠른 기능 인쇄 속도(일반적" -"으로 희박하거나 단단한 충전재)에 대해 테스트를 실행하는 것이 좋습니다. 그런 " -"다음 가장 느리고 가장 빠른 인쇄 가속을 위해 동일한 속도로 실행하고 Klipper 입" -"력 셰이퍼에서 제공하는 권장 최대 가속보다 빠르지 않게 실행하십시오.\n" -"2. 각 체적 유속 및 가속도에 대한 최적의 PA 값을 기록해 두십시오. 색상 구성표 " +"1. 가속도 값당 최소 3개 속도에 대해 PA 테스트를 실행합니다. 최소한 외부 둘레" +"의 속도, 내부 둘레의 속도 및 프로필의 가장 빠른 기능 출력 속도(일반적으로 희" +"박하거나 단단한 충전재)에 대해 테스트를 실행하는 것이 좋습니다. 그런 다음 가" +"장 느리고 가장 빠른 출력 가속을 위해 동일한 속도로 실행하고 Klipper 입력 셰이" +"퍼에서 제공하는 권장 최대 가속보다 빠르지 않게 실행하십시오.\n" +"2. 각 압출 유속 및 가속도에 대한 최적의 PA 값을 기록해 두십시오. 색상 구성표 " "드롭다운에서 흐름을 선택하고 PA 패턴 라인 위로 수평 슬라이더를 이동하여 흐름 " "번호를 찾을 수 있습니다. 페이지 하단에 번호가 표시되어야 합니다. 이상적인 PA " -"값은 체적 유량이 높을수록 감소해야 합니다. 그렇지 않은 경우 압출기가 올바르" -"게 작동하는지 확인하십시오. 인쇄 속도가 느리고 가속도가 낮을수록 허용되는 PA " +"값은 압출 압출량이 높을수록 감소해야 합니다. 그렇지 않은 경우 압출기가 올바르" +"게 작동하는지 확인하십시오. 출력 속도가 느리고 가속도가 낮을수록 허용되는 PA " "값의 범위는 더 커집니다. 차이가 보이지 않으면 더 빠른 테스트의 PA 값을 사용하" -"십시오.3. 여기 텍스트 상자에 PA 값, 흐름 및 가속도의 세 가지 값을 입력하고 필" -"라멘트 프로필을 저장하세요.\n" +"십시오.\n" +"3. 여기 텍스트 상자에 PA 값, 흐름 및 가속도의 세 가지 값을 입력하고 필라멘트 " +"프로필을 저장하세요." msgid "Enable adaptive pressure advance for overhangs (beta)" -msgstr "오버행에 대한 적응형 압력 전진 활성화(베타)" +msgstr "오버행에 대한 적응형 PA 활성화(베타)" msgid "" "Enable adaptive PA for overhangs as well as when flow changes within the " @@ -10588,25 +12603,25 @@ msgid "" "set accurately, it will cause uniformity issues on the external surfaces " "before and after overhangs.\n" msgstr "" -"돌출부뿐만 아니라 동일한 기능 내에서 흐름이 변경되는 경우 적응형 PA를 활성화" +"오버행뿐만 아니라 동일한 기능 내에서 흐름이 변경되는 경우 적응형 PA를 활성화" "합니다. 이는 실험적인 옵션입니다. PA 프로파일이 정확하게 설정되지 않으면 오버" "행 전후의 외부 표면에 균일성 문제가 발생할 수 있습니다.\n" msgid "Pressure advance for bridges" -msgstr "브릿지를 위한 압력 전진" +msgstr "브릿지를 위한 PA" msgid "" -"Pressure advance value for bridges. Set to 0 to disable. \n" +"Pressure advance value for bridges. Set to 0 to disable.\n" "\n" -" A lower PA value when printing bridges helps reduce the appearance of " -"slight under extrusion immediately after bridges. This is caused by the " -"pressure drop in the nozzle when printing in the air and a lower PA helps " -"counteract this." +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" -"브릿지의 압력 전진 값입니다. 비활성화하려면 0으로 설정합니다. \n" +"브릿지의 PA 값입니다. 비활성화하려면 0으로 설정합니다.\n" "\n" " 브릿지를 프린팅할 때 PA 값이 낮으면 브릿지 직후에 약간의 언더 압출이 나타나" -"는 것을 줄이는 데 도움이 됩니다. 이는 공중에서 인쇄할 때 노즐의 압력 강하로 " +"는 것을 줄이는 데 도움이 됩니다. 이는 공중에서 출력할 때 노즐의 압력 강하로 " "인해 발생하며 PA가 낮을수록 이를 방지하는 데 도움이 됩니다." msgid "" @@ -10620,35 +12635,32 @@ msgid "Keep fan always on" msgstr "팬 상시 가동" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "이 설정을 활성화하면 출력물 냉각 팬이 정지되지 않으며 팬을 최소 속도로 가동하" "여 시동 및 정지 빈도를 줄입니다" msgid "Don't slow down outer walls" -msgstr "외벽 감속하지 않기" +msgstr "외벽에서 감속하지 않기" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "활성화되면 최소 레이어 시간을 충족하기 위한 외벽의 출력 속도 감속을 적용하지 " "않습니다. 이 기능은 아래의 경우에 도움이 될 수 있습니다:\n" -"\n" -"1. 유광 필라멘트로 인쇄할 때 일정한 광택을 유지하기 위한 경우 \n" +"1. 유광 필라멘트로 출력할 때 일정한 광택을 유지하기 위한 경우\n" "2. 외벽 출력 속도의 변화로 인한 외벽의 Z밴딩처럼 보이는 형상이 생성되는 것을 " -"방지하기 위한 경우 \n" -"3. 외벽을 VFA를 발생시키는 속도로 출력하는 것을 방지하기 위한 경우\n" -"\n" +"방지하기 위한 경우\n" +"3. 외벽을 VFA를 발생시키는 속도로 출력하는 것을 방지하기 위한 경우" msgid "Layer time" msgstr "레이어 시간" @@ -10656,7 +12668,7 @@ msgstr "레이어 시간" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "예상 시간이 이 값보다 짧은 레이어에 대해 출력물 냉각 팬이 활성화됩니다. 팬 속" "도는 레이어 출력 시간에 따라 최소 및 최대 팬 속도 사이에서 보간됩니다" @@ -10664,8 +12676,10 @@ msgstr "" msgid "Default color" msgstr "기본 색상" -msgid "Default filament color" -msgstr "기본 필라멘트 색상" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "필라멘트 메모" @@ -10674,52 +12688,118 @@ msgid "You can put your notes regarding the filament here." msgstr "여기에 필라멘트에 관한 메모를 할 수 있습니다." msgid "Required nozzle HRC" -msgstr "필수 노즐 록웰 경도" +msgstr "필수 노즐 HRC" msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"필라멘트 출력에 필요한 노즐의 최소 록웰 경도. 0은 노즐의 록웰 경도를 확인하" -"지 않음을 의미합니다." +"필라멘트 출력에 필요한 노즐의 최소 HRC. 0은 노즐의 록웰 경도를 확인하지 않음" +"을 의미합니다." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "이 설정은 초당 얼마나 많은 양의 필라멘트를 녹이고 압출할 수 있는지를 나타냅니" -"다. 너무 높고 부적절한 속도 설정의 경우 출력 속도는 최대 체적 속도에 의해 제" +"다. 너무 높고 부적절한 속도 설정의 경우 출력 속도는 최대 압출 속도에 의해 제" "한됩니다. 0이 될 수 없습니다" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "필라멘트 넣기 시간" -msgid "Time to load new filament when switch filament. For statistics only" -msgstr "필라멘트 교체 시 새 필라멘트를 넣는 시간입니다. 통계에만 사용됩니다" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"필라멘트를 교체할 때 새 필라멘트를 로드하는 시간입니다. 일반적으로 단일 압출" +"기 다중 재료 기계에 적용 가능합니다. 공구 교환기 또는 다중 공구 기계의 경우 " +"일반적으로 0입니다. 통계용으로만 사용됩니다" msgid "Filament unload time" msgstr "필라멘트 빼기 시간" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"필라멘트를 교체할 때 기존 필라멘트를 빼는 시간입니다. 통계에만 사용됩니다" +"필라멘트를 교체할 때 오래된 필라멘트를 언로드하는 시간입니다. 일반적으로 단" +"일 압출기 다중 재료 기계에 적용 가능합니다. 공구 교환기 또는 다중 공구 기계" +"의 경우 일반적으로 0입니다. 통계용으로만 사용됩니다" + +msgid "Tool change time" +msgstr "툴 체인지 시간" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." msgstr "" -"필라멘트 직경은 G코드에서 압출량을 계산하는데 사용되므로 중요하며 정확해야 합" -"니다" +"툴 체인지를 전환하는 데 소요되는 시간입니다. 일반적으로 공구 교환기 또는 다" +"중 공구 기계에 적용 가능합니다. 단일 압출기 다중 재료 기계의 경우 일반적으로 " +"0입니다. 통계용으로만 사용됩니다" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"필라멘트 직경은 Gcode에서 압출량을 계산하는데 사용되므로 중요하며 정확해야 합" +"니다." msgid "Pellet flow coefficient" -msgstr "펠릿 유량 계수" +msgstr "펠릿 압출량 계수" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10727,7 +12807,7 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -"펠릿 유량 계수는 경험적으로 추산되며 펠릿 프린터에서의 부피 계산에 사용됩니" +"펠릿 압출량 계수는 경험적으로 추산되며 펠릿 프린터에서의 부피 계산에 사용됩니" "다.\n" "\n" "내부적으로 이 값은 filament_diameter로 변환됩니다. 다른 부피 계산은 영향을 받" @@ -10735,13 +12815,25 @@ msgstr "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" -msgstr "수축" +msgid "Adaptive volumetric speed" +msgstr "" -#, no-c-format, no-boost-format +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "수축(XY)" + +#, fuzzy, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -10749,13 +12841,31 @@ msgstr "" "냉각 후 필라멘트가 얻게 될 수축률을 입력합니다(100mm 대신 94mm를 측정하는 경" "우 94%). 출력물은 xy 방향으로 보정됩니다. 외벽에 사용되는 필라멘트에만 적용됩" "니다.\n" -"이 보정은 확인 후 수행되므로 개체 사이에 충분한 공간을 허용해야 합니다." +"이 보정은 확인 후 수행되므로 객체 사이에 충분한 공간을 허용해야 합니다." + +msgid "Shrinkage (Z)" +msgstr "수축(Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"냉각 후 필라멘트가 얻게 될 수축률을 입력합니다(100mm 대신 94mm를 측정하는 경" +"우 94%). 보상을 위해 부품의 크기가 Z로 조정됩니다." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" msgstr "압출 속도" msgid "Speed used for loading the filament on the wipe tower." -msgstr "닦기 타워에 필라멘트를 압출하는 데 사용되는 속도입니다." +msgstr "프라임 타워에 필라멘트를 압출하는 데 사용되는 속도입니다." msgid "Loading speed at the start" msgstr "시작 시 압출 속도" @@ -10767,25 +12877,25 @@ msgid "Unloading speed" msgstr "언로드 속도" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"닦기 타워에 필라멘트를 빼는 데 사용되는 속도(래밍 직후 빼기 초기 부분에는 영" -"향을 미치지 않음)" +"프라임 타워에 필라멘트를 빼는 데 사용되는 속도(채워넣기 직후 빼기 초기 부분에" +"는 영향을 미치지 않음)" msgid "Unloading speed at the start" msgstr "시작시 언로드 속도" msgid "" "Speed used for unloading the tip of the filament immediately after ramming." -msgstr "래밍 직후 필라멘트 끝을 빼는 데 사용되는 속도입니다." +msgstr "채워넣기 직후 필라멘트 끝을 빼는 데 사용되는 속도입니다." msgid "Delay after unloading" -msgstr "빼기 후 지연" +msgstr "언로드 후 지연" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "필라멘트를 뺀 후 기다리는 시간입니다. 원래 치수로 축소되는 데 더 많은 시간이 " @@ -10812,7 +12922,7 @@ msgid "Stamping distance measured from the center of the cooling tube" msgstr "냉각 튜브 중심에서 측정한 스탬핑 거리" msgid "" -"If set to nonzero value, filament is moved toward the nozzle between the " +"If set to non-zero value, filament is moved toward the nozzle between the " "individual cooling moves (\"stamping\"). This option configures how long " "this movement should be before the filament is retracted again." msgstr "" @@ -10827,7 +12937,7 @@ msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "이 속도부터 냉각 동작이 점차 가속됩니다." msgid "Minimal purge on wipe tower" -msgstr "닦기 타워의 최소 청소" +msgstr "프라임 타워의 최소 청소" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -10836,10 +12946,10 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"툴 교환 후 노즐 내부에 새로 로드된 필라멘트의 정확한 위치를 알 수 없으며 필라" -"멘트 압력이 아직 안정적이지 않을 수 있습니다. 프린트 헤드를 채우기 또는 희생 " -"개체로 청소하기 전에 Snapmaker Orca은 항상 이 양의 재료를 닦기 타워로 프라이밍하" -"여 연속적인 채우기 또는 희생 물체 압출을 안정적으로 생성합니다." +"툴 체인지 후 노즐 내부에 새로 로드된 필라멘트의 정확한 위치를 알 수 없으며 필" +"라멘트 압력이 아직 안정적이지 않을 수 있습니다. 프린트 헤드를 채우기 또는 희" +"생 객체로 청소하기 전에 Snapmaker Orca은 항상 이 양의 재료를 프라임 타워로 프라" +"이밍하여 연속적인 채우기 또는 희생 물체 압출을 안정적으로 생성합니다." msgid "Speed of the last cooling move" msgstr "마지막 냉각 이동 속도" @@ -10847,94 +12957,88 @@ msgstr "마지막 냉각 이동 속도" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "냉각 동작은 이 속도를 향해 점진적으로 감속됩니다." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 새 " -"필라멘트를 넣는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 시간" -"에 추가됩니다." - msgid "Ramming parameters" -msgstr "래밍 매개변수" +msgstr "채워넣기 매개변수" msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" -"이 문자열은 RammingDialog에 의해 편집되며 래밍 관련 매개변수를 포함합니다." +"이 문자열은 채워넣기 다이얼로그에 의해 편집되며 채워넣기 관련 매개변수를 포함" +"합니다." + +msgid "Enable ramming for multi-tool setups" +msgstr "다중 압출기 설정을 위한 채워넣기 활성화" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -"툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 필라" -"멘트를 빼는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 시간에 추" -"가됩니다." +"다중 압출기 프린터를 사용할 때 채워넣기를 수행합니다(예: 프린터 설정에서 '단" +"일 압출기 다중 재료'가 선택 취소된 경우). 활성화하면 툴 체인지 직전 프라임 타" +"워에 소량의 필라멘트가 빠르게 압출됩니다. 이 옵션은 프라임 타워가 활성화된 경" +"우에만 사용됩니다." -msgid "Enable ramming for multitool setups" -msgstr "다중 압출기 설정을 위한 래밍 활성화" +msgid "Multi-tool ramming volume" +msgstr "다중 압출기 채워넣기 부피" -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." -msgstr "" -"다중 압출기 프린터를 사용할 때 래밍을 수행합니다(예: 프린터 설정에서 '단일 압" -"출기 다중 재료'가 선택 취소된 경우). 활성화하면 툴 체인지 직전 닦기 타워에 소" -"량의 필라멘트가 빠르게 압출됩니다. 이 옵션은 닦기 타워가 활성화된 경우에만 사" -"용됩니다." +msgid "The volume to be rammed before the tool change." +msgstr "툴 체인지 전에 채워넣을 양 입니다." -msgid "Multitool ramming volume" -msgstr "다중 압출기 래밍 부피" +msgid "Multi-tool ramming flow" +msgstr "다중 압출기 채워넣기 압출량" -msgid "The volume to be rammed before the toolchange." -msgstr "툴 체인지 전에 래밍 할 볼륨입니다." - -msgid "Multitool ramming flow" -msgstr "다중 압출기 래밍 유량" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "툴 체인지 전에 필라멘트를 래밍하는 데 사용되는 유량입니다." +msgid "Flow used for ramming the filament before the tool change." +msgstr "툴 체인지 전에 필라멘트를 채워넣기에 사용되는 압출량입니다." msgid "Density" msgstr "밀도" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "필라멘트 밀도. 통계 전용" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "필라멘트의 재료 유형" msgid "Soluble material" msgstr "가용성 재료" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" -"가용성 재료는 일반적으로 지지대 및 지지대 접점을 출력하는 데 사용됩니다" +"가용성 재료는 일반적으로 서포트 및 서포트 접점을 출력하는 데 사용됩니다" -msgid "Support material" -msgstr "지지대 재료" +msgid "Filament ramming length" +msgstr "" msgid "" -"Support material is commonly used to print support and support interface" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + +msgid "Support material" +msgstr "서포트 재료" + +msgid "" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"서포트 재료는 일반적으로 서포트 및 서포트 접점을 출력하는 데 사용됩니다" + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" -"지지대 재료는 일반적으로 지지대 및 지지대 접점을 출력하는 데 사용됩니다" msgid "Softening temperature" msgstr "연화 온도" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "이 온도에서는 재료가 부드러워지므로 베드 온도가 이 온도 이상일 경우 막힘을 방" "지하기 위해 전면 도어를 열거나 상단 유리를 제거하는 것이 좋습니다." @@ -10942,7 +13046,7 @@ msgstr "" msgid "Price" msgstr "가격" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "필라멘트 가격. 통계 전용" msgid "money/kg" @@ -10951,7 +13055,7 @@ msgstr "가격/kg" msgid "Vendor" msgstr "제조사" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "필라멘트 제조사" msgid "(Undefined)" @@ -10962,7 +13066,7 @@ msgstr "드문 채우기 방향" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "선의 시작 또는 주 방향을 제어하는 드문 채우기 패턴에 대한 각도" msgid "Solid infill direction" @@ -10970,14 +13074,8 @@ msgstr "꽉찬 채우기 방향" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "선의 시작 또는 기본 방향을 제어하는 ​​솔리드 채우기 패턴의 각도" - -msgid "Rotate solid infill direction" -msgstr "솔리드 채우기 방향 회전" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "각 레이어에 대해 솔리드 채우기 방향을 90° 회전합니다." +"of line." +msgstr "선의 시작 또는 기본 방향을 제어하는 솔리드 채우기 패턴의 각도" msgid "Sparse infill density" msgstr "드문 채우기 밀도" @@ -10985,50 +13083,123 @@ msgstr "드문 채우기 밀도" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" "내부 드문 채우기의 밀도, 100%는 모든 드문 채우기를 꽉찬 내부 채우기로 변경하" "고 채우기에는 패턴이 사용됩니다" +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" + msgid "Sparse infill pattern" msgstr "드문 채우기 패턴" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "드문 내부 채우기의 선 패턴" -msgid "Grid" -msgstr "격자" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "선" -msgid "Cubic" -msgstr "정육면체" +msgid "Grid" +msgstr "격자" msgid "Tri-hexagon" msgstr "삼각-육각형" -msgid "Gyroid" -msgstr "자이로이드" - -msgid "Honeycomb" -msgstr "벌집" +msgid "Cubic" +msgstr "정육면체" msgid "Adaptive Cubic" msgstr "적응형 정육면체" -msgid "3D Honeycomb" -msgstr "3D 벌집" +msgid "Quarter Cubic" +msgstr "쿼터 큐빅" msgid "Support Cubic" -msgstr "정육면체 지지대" +msgstr "정육면체 서포트" msgid "Lightning" msgstr "번개" +msgid "Honeycomb" +msgstr "벌집" + +msgid "3D Honeycomb" +msgstr "3D 벌집" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "2D 격자" + msgid "Cross Hatch" msgstr "크로스 해치" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "자이로이드" + +msgid "Lateral lattice angle 1" +msgstr "격자 각도 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Z 방향의 첫 번째 2D 격자 요소 집합의 각도입니다. 0은 수직입니다." + +msgid "Lateral lattice angle 2" +msgstr "격자 각도 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Z 방향에서 두 번째 2D 격자 요소 세트의 각도입니다. 0은 수직입니다." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "드문 채우기 고정점 길이" @@ -11040,7 +13211,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11071,7 +13242,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11087,22 +13258,22 @@ msgstr "" msgid "0 (Simple connect)" msgstr "0 (단순 연결)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "외벽의 가속도" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "내벽의 가속도" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "이동 가속도" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "상단 표면 가속도. 낮은 값을 사용하면 상단 표면 품질이 향상될 수 있습니다" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "외벽의 가속도. 낮은 값을 사용하면 품질이 향상 될 수 있습니다" msgid "" @@ -11132,7 +13303,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "초기 레이어 가속도. 낮은 값을 사용하면 빌드 플레이트 안착률을 높일 수 있습니" "다" @@ -11140,7 +13311,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "가속/감속 활성화" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper의 max_accel_to_decel은 자동으로 조정됩니다" msgid "accel_to_decel" @@ -11148,25 +13319,36 @@ msgstr "가속/감속" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper의 max_accel_to_decel은 가속도의 %%로 조정됩니다" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "외벽 저크" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "내벽 저크" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "상단 표면 저크" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "채우기 저크" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "초기 레이어 저크" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "이동 저크" msgid "" @@ -11179,24 +13361,24 @@ msgstr "초기 레이어 높이" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "초기 레이어의 높이입니다. 초기 레이어 높이를 약간 두껍게 하면 빌드 플레이트 " "접착력을 향상시킬 수 있습니다" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "꽉찬 채우기 부분을 제외한 초기 레이어 속도" msgid "Initial layer infill" msgstr "초기 레이어 채우기" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "초기 레이어의 꽉찬 채우기 속도" msgid "Initial layer travel speed" msgstr "초기 레이어 이동 속도" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "초기 레이어 이동 속도" msgid "Number of slow layers" @@ -11212,7 +13394,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "초기 레이어 노즐 온도" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "이 필라멘트를 사용할 때 초기 레이어를 출력하기 위한 노즐 온도" msgid "Full fan speed at layer" @@ -11234,22 +13416,52 @@ msgid "layer" msgstr "레이어" msgid "Support interface fan speed" -msgstr "지지대 접점 팬 속도" +msgstr "서포트 접점 팬 속도" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"이 파트 냉각 팬 속도는 서포트 인터페이스를 출력할 때 적용됩니다. 이 파라미터" +"를 일반 속도보다 높게 설정하면 서포트와 서포트 파트 사이의 레이어 결합 강도" +"가 감소하여 쉽게 분리할 수 있습니다.\n" +"비활성화하려면 -1로 설정합니다.\n" +"이 설정은 disable_fan_first_layers로 재정의됩니다." + +msgid "Internal bridges fan speed" +msgstr "내부 브릿지 팬 속도" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"모든 내부 브릿지에 사용되는 부품 냉각 팬 속도입니다. 오버행 팬 속도 설정을 대" +"신 사용하려면 -1로 설정합니다.\n" +"\n" +"내부 브릿지 팬 속도를 일반 팬 속도보다 낮추면 넓은 표면에 장시간 과도한 냉각" +"이 가해져 파트가 뒤틀리는 현상을 줄일 수 있습니다." + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"이 설정값은 높은 팬 속도로 접점의 결합을 약화시킬 수 있도록 모든 지지대 접점" -"(Support interface)에 적용됩니다.\n" -"사용하지 않으려면 -1로 설정합니다.\n" -"disable_fan_first_layers로만 재정의할 수 있습니다." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "벽을 출력하는 동안 무작위로 지터가 발생하여 표면이 거칠게 보입니다. 이 설정" "은 퍼지 위치를 제어합니다" @@ -11267,36 +13479,144 @@ msgid "Fuzzy skin thickness" msgstr "퍼지 스킨 두께" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "임의로 움직일 너비입니다. 외벽 선 너비 보다 얇게 하는 것이 좋습니다" msgid "Fuzzy skin point distance" msgstr "퍼지 스킨 지점 거리" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "각 선의 분절에 도입된 임의의 지점간 평균 거리" msgid "Apply fuzzy skin to first layer" msgstr "첫 번째 레이어에 퍼지 스킨 적용" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." msgstr "첫 번째 레이어에 퍼지 스킨을 적용할지 여부" +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "결합" + +msgid "Fuzzy skin noise type" +msgstr "퍼지 스킨 노이즈 유형" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"흐릿한 피부 생성에 사용할 노이즈 유형입니다.\n" +"클래식: 클래식 균일 랜덤 노이즈.\n" +"펄린: 펄린 노이즈: 보다 일관된 텍스처를 제공하는 펄린 노이즈입니다.\n" +"빌로우: 펄린 노이즈와 비슷하지만 더 뭉툭합니다.\n" +"리지드 멀티프랙탈: 날카롭고 들쭉날쭉한 특징을 가진 리지드 노이즈입니다. 대리" +"석과 같은 텍스처를 만듭니다.\n" +"보로노이: 보로노이: 표면을 보로노이 셀로 나누고 각 셀을 임의의 양만큼 이동시" +"킵니다. 패치워크 텍스처를 만듭니다." + +msgid "Classic" +msgstr "클래식" + +msgid "Perlin" +msgstr "펄린" + +msgid "Billow" +msgstr "빌로우" + +msgid "Ridged Multifractal" +msgstr "리지드 멀티프랙탈" + +msgid "Voronoi" +msgstr "보로노이" + +msgid "Fuzzy skin feature size" +msgstr "퍼지 스킨 피처 크기" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"코히어런트 노이즈 피처의 기본 크기(mm)입니다. 값이 클수록 피처가 커집니다." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "퍼지 스킨 노이즈 옥타브" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"사용할 일관된 노이즈의 옥타브 수입니다. 값이 클수록 노이즈의 디테일이 증가하" +"지만 계산 시간도 늘어납니다." + +msgid "Fuzzy skin noise persistence" +msgstr "퍼지 스킨 노이즈 지속성" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"코히어런트 노이즈의 높은 옥타브에 대한 감쇠율입니다. 값이 낮을수록 노이즈가 " +"더 부드러워집니다." + msgid "Filter out tiny gaps" msgstr "작은 간격 필터링" msgid "Layers and Perimeters" msgstr "레이어와 윤곽선" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "지정된 임계값보다 작은 간격을 필터링합니다" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"지정된 임계값(mm 단위)보다 길이가 작은 간격 채우기를 출력하지 마십시오. 이 설" +"정은 상단, 하단 및 솔리드 채우기에 적용되며, 클래식 주변 생성기를 사용하는 경" +"우 벽 간격 채우기에 적용됩니다." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "간격 채우기 속도. 간격은 일반적으로 선 너비가 불규칙하므로 더 천천히 출력해" "야 합니다" @@ -11305,12 +13625,12 @@ msgid "Precise Z height" msgstr "정확한 Z 높이" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" "슬라이싱 후 객체의 정확한 z 높이를 얻으려면 이 옵션을 활성화하세요. 마지막 " -"몇 레이어의 레이어 높이를 미세 조정하여 정확한 개체 높이를 얻습니다. 이는 실" +"몇 레이어의 레이어 높이를 미세 조정하여 정확한 객체 높이를 얻습니다. 이는 실" "험적인 매개변수입니다." msgid "Arc fitting" @@ -11318,16 +13638,16 @@ msgstr "원호 맞춤" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" -"G2 및 G3 이동이 있는 G코드 파일을 얻으려면 이 옵션을 활성화하십시오. 피팅 공" -"차는 분해능과 동일합니다. \n" +"G2 및 G3 이동이 있는 Gcode 파일을 얻으려면 이 옵션을 활성화하십시오. 피팅 공" +"차는 분해능과 동일합니다.\n" "\n" "참고: Klipper 기계의 경우 이 옵션을 비활성화하는 것이 좋습니다. Klipper는 " "arc 명령이 펌웨어에 의해 라인 세그먼트로 다시 분할되므로 이점을 얻지 못합니" @@ -11337,16 +13657,17 @@ msgstr "" msgid "Add line number" msgstr "라인 번호 추가" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" -"각 G코드 라인의 시작 부분에 라인 번호(Nx)를 추가하려면 이 기능을 활성화하세요" +"각 Gcode 라인의 시작 부분에 라인 번호(Nx)를 추가하려면 이 기능을 활성화하세요" msgid "Scan first layer" msgstr "첫 레이어 스캔" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "프린터의 카메라가 첫 레이어의 품질을 확인할 수 있도록 하려면 이 옵션을 활성화" "하세요" @@ -11356,7 +13677,7 @@ msgstr "노즐 유형" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "노즐의 금속 재질. 노즐의 내마모성을 결정하고 어떤 종류의 필라멘트를 출력할 " "수 있는지를 결정합니다" @@ -11365,16 +13686,19 @@ msgid "Undefine" msgstr "알 수 없음" msgid "Hardened steel" -msgstr "경화강 노즐" +msgstr "경화강" msgid "Stainless steel" -msgstr "스테인레스강 노즐" +msgstr "스테인레스 스틸" + +msgid "Tungsten carbide" +msgstr "" msgid "Brass" -msgstr "황동 노즐" +msgstr "황동" msgid "Nozzle HRC" -msgstr "노즐 록웰 경도" +msgstr "노즐 HRC" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " @@ -11383,12 +13707,12 @@ msgstr "" "노즐의 경도. 0은 슬라이스하는 동안 노즐의 경도를 확인하지 않음을 의미합니다." msgid "HRC" -msgstr "록웰 경도" +msgstr "HRC" msgid "Printer structure" msgstr "프린터 구조" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "출력 장치의 물리적 배열 및 구성 요소" msgid "CoreXY" @@ -11404,7 +13728,7 @@ msgid "Delta" msgstr "델타" msgid "Best object position" -msgstr "가장 좋은 개체 위치" +msgstr "가장 좋은 객체 위치" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "베드 모양 w.r.t. 범위 [0,1] 내에서 가장 좋은 자동 정렬 위치입니다." @@ -11413,7 +13737,7 @@ msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" -"장치에 보조 출력물 냉각팬이 있는 경우 이 옵션을 활성화합니다. G코드 명령: " +"장치에 보조 출력물 냉각팬이 있는 경우 이 옵션을 활성화합니다. Gcode 명령: " "M106 P2 S(0-255)." msgid "" @@ -11421,25 +13745,25 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "목표한 시작 시간보다 이 시간(소수 초를 사용할 수 있음) 일찍 팬을 시작합니다. " "이 시간 추정을 위해 무한 가속을 가정하고 G1 및 G0 이동만 고려합니다(원호 맞춤" "은 지원되지 않음).\n" -"사용자 정의 G코드에서 팬 명령을 이동하지 않습니다(일종의 '장벽' 역할을 함).\n" -"'사용자 정의 시작 G코드만'이 활성화된 경우 팬 명령을 시작 G코드로 이동하지 않" +"사용자 정의 Gcode에서 팬 명령을 이동하지 않습니다(일종의 '장벽' 역할을 함).\n" +"'사용자 정의 시작 Gcode만'이 활성화된 경우 팬 명령을 시작 Gcode로 이동하지 않" "습니다.\n" "비활성화하려면 0을 사용하세요." msgid "Only overhangs" -msgstr "돌출부 만" +msgstr "오버행 만" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "돌출부 냉각 지연만 고려합니다." +msgstr "오버행 냉각 지연만 고려합니다." msgid "Fan kick-start time" msgstr "팬 시동 시간" @@ -11460,7 +13784,7 @@ msgstr "" msgid "Time cost" msgstr "시간비용" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "시간당 프린터 비용" msgid "money/h" @@ -11474,7 +13798,7 @@ msgid "" "G-code command: M141 S(0-255)" msgstr "" "이 옵션은 기계가 챔버 온도 제어를 지원하는 경우 활성화됩니다.\n" -"G코드 명령: M141 S(0-255)" +"Gcode 명령: M141 S(0-255)" msgid "Support air filtration" msgstr "공기 여과 지원" @@ -11484,13 +13808,13 @@ msgid "" "G-code command: M106 P3 S(0-255)" msgstr "" "프린터가 공기 여과를 지원하는 경우 활성화하세요.\n" -"G코드 명령: M106 P3 S(0-255)" +"Gcode 명령: M106 P3 S(0-255)" msgid "G-code flavor" -msgstr "G코드 유형" +msgstr "Gcode 유형" -msgid "What kind of gcode the printer is compatible with" -msgstr "프린터와 호환되는 G코드 종류" +msgid "What kind of G-code the printer is compatible with." +msgstr "프린터와 호환되는 Gcode 종류" msgid "Klipper" msgstr "Klipper" @@ -11498,45 +13822,45 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "펠릿 프린터" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "프린터가 필라멘트 대신 펠릿을 사용할 경우 활성화하세요" msgid "Support multi bed types" -msgstr "멀티 배드 유형 지원" +msgstr "멀티 베드 유형 지원" -msgid "Enable this option if you want to use multiple bed types" -msgstr "여러 배드 유형을 사용하려면 이 옵션을 활성화하세요" +msgid "Enable this option if you want to use multiple bed types." +msgstr "여러 베드 유형을 사용하려면 이 옵션을 활성화하세요" msgid "Label objects" -msgstr "개체 이름표" +msgstr "객체 이름표" # Wipe into this object;s infill/Wipe into this object msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"이 옵션을 선택하면 G코드 출력시 이동에 설명을 추가할 수 있습니다. 이는 " -"Octoprint CancelObject 플러그인에 유용합니다. \n" -"이 설정은 단일 압출기 다중 재료 설정 및 개체에서 닦기 / 채우기에서 닦기와 호" -"환되지 않습니다." +"이 옵션을 선택하면 Gcode 출력시 이동에 설명을 추가할 수 있습니다. 이는 " +"Octoprint CancelObject 플러그인에 유용합니다.\n" +"이 설정은 단일 압출기 다중 재료 설정 및 객체에서 노즐 청소 / 채우기에서 노즐 " +"청소와 호환되지 않습니다." msgid "Exclude objects" -msgstr "개체 제외" +msgstr "객체 제외" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "G코드에 개체 제외 명령을 추가하려면 이 옵션을 활성화하세요" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Gcode에 객체 제외 명령을 추가하려면 이 옵션을 활성화하세요." msgid "Verbose G-code" -msgstr "상세한 G코드" +msgstr "상세한 Gcode" msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" -"주석이 달린 G코드 파일을 가져오려면 이 기능을 활성화하세요. 각 라인은 설명 텍" +"주석이 달린 Gcode 파일을 가져오려면 이 기능을 활성화하세요. 각 라인은 설명 텍" "스트로 설명됩니다. SD 카드에서 출력하는 경우 파일의 추가 크기로 인해 펌웨어 " "속도가 느려질 수 있습니다." @@ -11550,6 +13874,138 @@ msgstr "" "여러 레이어의 드문 채우기를 자동으로 결합 후 함께 출력하여 시간을 단축합니" "다. 벽은 여전히 설정된 레이어 높이로 출력됩니다." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "채우기 조합 - 최대 레이어 높이" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"결합된 희소 채우기의 최대 레이어 높이입니다.\n" +"\n" +"노즐 직경(출력 시간을 최대로 줄이기 위해)을 사용하려면 0 또는 100%로 설정하" +"고 희박한 채우기 강도를 최대화하려면 ~80% 값으로 설정합니다.\n" +"\n" +"채우기가 결합되는 레이어 수는 이 값을 레이어 높이로 나누고 가장 가까운 소수" +"점 이하 자릿수로 반내림하여 파생됩니다.\n" +"\n" +"절대 mm 값(예: 0.4mm 노즐의 경우 0.32mm) 또는 % 값(예: 80%)을 사용합니다. 이 " +"값은 노즐 직경보다 커서는 안 됩니다." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "내부 드문 채우기를 출력할 필라멘트." @@ -11574,34 +14030,40 @@ msgstr "" "압출 및 축적 가능성을 최소화하려면 이 값을 ~10-15%로 설정하십시오." msgid "Top/Bottom solid infill/wall overlap" -msgstr "상단/하단 솔리드 채우기/벽 겹침" +msgstr "상하단 솔리드 채우기/벽 겹침" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "상단 솔리드 채우기 영역은 더 나은 접착을 위해 벽과 겹치도록 약간 확대되고 상" "단 채우기가 벽과 만나는 핀홀의 모양을 최소화합니다. 25-30%의 값은 핀홀의 모양" "을 최소화하는 좋은 출발점입니다. 백분율 값은 희박한 채우기의 선 너비를 기준으" "로 합니다" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "내부 드문 채우기 속도" +msgid "Inherits profile" +msgstr "프로필 상속" + +msgid "Name of parent profile." +msgstr "부모 프로필 이름" + msgid "Interface shells" msgstr "접점 쉘" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"인접한 재료/체적 사이에 꽉찬 쉘을 강제로 생성합니다. 투명한 재료 또는 용해성 " -"지지대 재료를 사용하는 다중 압출기 출력에 유용합니다" +"인접한 재료/압출 사이에 꽉찬 쉘을 강제로 생성합니다. 투명한 재료 또는 용해성 " +"서포트 재료를 사용하는 다중 압출기 출력에 유용합니다" msgid "Maximum width of a segmented region" msgstr "분할된 영역의 최대 너비" @@ -11615,7 +14077,7 @@ msgstr "분할된 영역의 연동 깊이" msgid "" "Interlocking depth of a segmented region. It will be ignored if " "\"mmu_segmented_region_max_width\" is zero or if " -"\"mmu_segmented_region_interlocking_depth\"is bigger then " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " "\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" "분할된 영역의 연동 깊이. \"mmu_segmented_region_max_width\"가 0이거나 " @@ -11631,9 +14093,9 @@ msgid "" "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" -"서로 다른 필라멘트가 접촉하는 곳에 맞물리는 구조의 (인터로킹) 빔을 생성합니" -"다. 이 기능은 필라멘트 간의 결합력을 향상시키며, 서로 다른 재료로 출력한 모델" -"에 특히 유용합니다." +"서로 다른 필라멘트가 접촉하는 곳에 맞물리는 구조의 인터로킹 빔을 생성합니다. " +"이 기능은 필라멘트 간의 결합력을 향상시키며, 서로 다른 재료로 출력한 모델에 " +"특히 유용합니다." msgid "Interlocking beam width" msgstr "인터로킹 빔 너비" @@ -11700,93 +14162,104 @@ msgstr "모든 꽉찬 레이어" msgid "Ironing Pattern" msgstr "다림질 패턴" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "다림질할 때 사용할 패턴" msgid "Ironing flow" -msgstr "다림질 유량" +msgstr "다림질 압출량" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" -"다림질 중에 압출할 재료의 양입니다. 정상 레이어 높이의 유량에 상대적입니다. " -"값이 너무 높으면 표면에 과다 압출이 발생합니다" +"다림질 중에 압출할 재료의 양입니다. 정상 레이어 높이의 압출량에 상대적입니" +"다. 값이 너무 높으면 표면에 과다 압출이 발생합니다" msgid "Ironing line spacing" msgstr "다림질 선 간격" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "다림질 선 간격" +msgid "Ironing inset" +msgstr "다림질 삽입" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"가장자리로부터 유지할 거리입니다. 값이 0이면 노즐 직경의 절반으로 설정됩니다." + msgid "Ironing speed" msgstr "다림질 속도" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "다림질 선의 출력 속도" -msgid "Ironing angle" -msgstr "다림질 각도" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"다림질이 해당 각도에서 실행됩니다. 음수는 이 기능을 비활성화하고 기본값을 사" -"용합니다." -msgid "This gcode part is inserted at every layer change after lift z" -msgstr "이 G코드는 Z올리기 이후 모든 레이어 변경에 삽입됩니다" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "이 Gcode는 Z올리기 이후 모든 레이어 변경에 삽입됩니다" + +msgid "Clumping detection G-code" +msgstr "" msgid "Supports silent mode" msgstr "무음 모드 지원" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "기기가 낮은 가속도를 사용하여 출력하는 무음 모드 지원 여부" msgid "Emit limits to G-code" -msgstr "G코드에 대한 방출 제한" +msgstr "Gcode에 대한 방출 제한" msgid "Machine limits" msgstr "장치 한계" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" -"활성화되면 기계의 한계가 G코드 파일로 내보내집니다.\n" -"G코드 유형이 Klipper로 설정된 경우 이 옵션은 무시됩니다." +"활성화되면 기계의 한계가 Gcode 파일로 내보내집니다.\n" +"Gcode 유형이 Klipper로 설정된 경우 이 옵션은 무시됩니다." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" -"이 G코드는 출력 일시 정지를 위한 코드로 사용됩니다. 사용자는 G코드 뷰어에서 " -"일시 정지 G코드를 삽입할 수 있습니다" +"이 Gcode는 출력 일시 정지를 위한 코드로 사용됩니다. 사용자는 Gcode 뷰어에서 " +"일시 정지 Gcode를 삽입할 수 있습니다" -msgid "This G-code will be used as a custom code" -msgstr "이 G코드는 사용자 정의 코드로 사용됩니다" +msgid "This G-code will be used as a custom code." +msgstr "이 Gcode는 사용자 정의 코드로 사용됩니다" msgid "Small area flow compensation (beta)" -msgstr "작은 영역 유량 보상 (베타)" +msgstr "작은 영역 압출량 보상 (베타)" -msgid "Enable flow compensation for small infill areas" -msgstr "작은 채우기 영역에 대한 유량 보상 활성화" +msgid "Enable flow compensation for small infill areas." +msgstr "작은 채우기 영역에 대한 압출량 보상 활성화" msgid "Flow Compensation Model" -msgstr "유량 보상 모델" +msgstr "압출량 보상 모델" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"작은 채우기 영역의 유량을 조정하는 데 사용되는 유량 보상 모델. 모델은 " -"\"1.234,5.678\" 형식으로 한 줄에 하나씩 압출 길이 및 유량 수정 계수에 대한 쉼" -"표로 구분된 값 쌍으로 표현됩니다." msgid "Maximum speed X" msgstr "X축 최대 속도" @@ -11860,6 +14333,15 @@ msgstr "Z축 최대 저크" msgid "Maximum jerk of the E axis" msgstr "E축 최대 저크" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "압출 중 최대 속도" @@ -11887,108 +14369,135 @@ msgstr "후퇴 중 최대 가속도 (M204 R)" msgid "Maximum acceleration for travel" msgstr "이동 최대 가속도" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "이동 시 최대 가속도(M204 T)는 Marlin 2에만 적용됩니다" -msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "최소" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"자동 냉각이 활성화되면 출력물 냉각 팬 속도가 증가할 수 있습니다. 이는 출력물 " -"냉각 팬의 최대 속도 제한입니다" msgid "Max" msgstr "최대" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"자동 냉각이 활성화되면 출력물 냉각 팬 속도가 증가할 수 있습니다. 이는 출력물 " +"냉각 팬의 최대 속도 제한입니다" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"압출기의 출력 가능한 최대 레이어 높이입니다. 사용된 값은 적응형 레이어 높이" -"를 활성화할 때 최대 레이어 높이를 제한합니다" msgid "Extrusion rate smoothing" -msgstr "유연한 압출 유량" +msgstr "유연한 압출량" +#, fuzzy msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " "the printer transitions from printing a high flow (high speed/larger width) " "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -"이 매개변수는 프린터가 높은 유량(고속/더 큰 너비) 압출에서 낮은 유량(낮은 속" -"도/더 작은 너비) 압출로 또는 그 반대로 출력할 때 발생하는 급격한 압출 속도 변" -"화를 완화합니다.\n" +"이 매개변수는 프린터가 높은 압출량(고속/더 큰 너비) 압출에서 낮은 압출량(낮" +"은 속도/더 작은 너비) 압출로 또는 그 반대로 출력할 때 발생하는 급격한 압출 속" +"도 변화를 완화합니다.\n" "\n" -"이는 압출된 체적 유량(mm3/초)이 시간에 따라 변할 수 있는 최대 속도를 정의합니" -"다. 값이 높을수록 더 높은 압출 속도 변경이 허용되어 속도 전환이 더 빨라진다" +"이는 압출된 압출 압출량(mm³/초)이 시간에 따라 변할 수 있는 최대 속도를 정의합" +"니다. 값이 높을수록 더 높은 압출 속도 변경이 허용되어 속도 전환이 더 빨라진다" "는 의미입니다.\n" "\n" "값이 0이면 기능이 비활성화됩니다.\n" "\n" -"고속, 고유량 직접 구동 프린터(예: 뱀부랩 또는 보론)의 경우 일반적으로 이 값" +"고속, 고압출량 직접 구동 프린터(예: 뱀부랩 또는 보론)의 경우 일반적으로 이 값" "이 필요하지 않습니다. 그러나 기능 속도가 크게 달라지는 특정 경우에는 약간의 " -"이점을 제공할 수 있습니다. 예를 들어 돌출부로 인해 급격하게 감속이 발생하는 " -"경우입니다. 이러한 경우 약 300-350mm3/s2의 높은 값이 권장됩니다. 이렇게 하면 " -"프레셔 어드밴스가 더 부드러운 유량 전환을 달성하는 데 도움이 될 만큼 충분히 " -"매끄러워질 수 있기 때문입니다.\n" +"이점을 제공할 수 있습니다. 예를 들어 오버행로 인해 급격하게 감속이 발생하는 " +"경우입니다. 이러한 경우 약 300-350 mm³/s²의 높은 값이 권장됩니다. 이렇게 하" +"면 프레셔 어드밴스가 더 부드러운 압출량 전환을 달성하는 데 도움이 될 만큼 충" +"분히 매끄러워질 수 있기 때문입니다.\n" "\n" "프레셔 어드밴스 기능이 없는 느린 프린터의 경우 값을 훨씬 낮게 설정해야 합니" -"다. 10-15mm3/s2 값은 직접 구동 압출기의 좋은 시작점이고 보우덴 스타일의 경우 " -"5-10mm3/s2입니다.\n" +"다. 10-15 mm³/s² 값은 직접 구동 압출기의 좋은 시작점이고 보우덴 스타일의 경" +"우 5-10 mm³/s²입니다.\n" "\n" "이 기능은 Prusa 슬라이서에서는 프레셔 이퀄라이저(Pressure Equalizer)로 알려" "져 있습니다.\n" "\n" "참고: 이 매개변수는 원호 피팅(Arc fitting)을 비활성화합니다." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "유연 분할 길이" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"값이 낮을수록 압출 속도 전환이 더 유연해집니다. 하지만 G코드 파일이 상당히 커" -"지고 프린터가 처리해야 할 연산이 더 많아집니다.\n" +"값이 낮을수록 압출 속도 전환이 더 부드러워집니다. 그러나 이 경우 g코드 파일" +"이 상당히 커지고 프린터가 처리해야 할 지침이 더 많아집니다.\n" "\n" -"기본값인 3은 대부분의 경우에 적합합니다. 프린터가 끊기는 경우 이 값을 늘려 조" +"기본값인 3이 대부분의 경우에 적합합니다. 프린터가 끊기는 경우 이 값을 늘려 조" "정 횟수를 줄이십시오.\n" "\n" -"허용되는 값: 1-5" +"허용된 값: 0.5-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "외부 기능에만 적용" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"외부 경계와 오버행에만 돌출 속도 평활화를 적용합니다. 이렇게 하면 사용자에게 " +"보이지 않는 피처의 출력 속도에는 영향을 주지 않으면서 외부에 보이는 오버행의 " +"급격한 속도 전환으로 인한 아티팩트를 줄일 수 있습니다." + +msgid "Minimum speed for part cooling fan." msgstr "출력물 냉각 팬의 최소 속도" msgid "" @@ -12000,31 +14509,26 @@ msgid "" msgstr "" "보조 출력물 냉각팬의 속도. 냉각 레이어가 없는 것으로 정의된 처음 여러 레이어" "를 제외하고 출력 중에 보조 팬이 이 속도로 작동합니다.\n" -"이 기능을 사용하려면 프린터 설정에서 보조 팬을 활성화하세요. G코드 명령: " +"이 기능을 사용하려면 프린터 설정에서 보조 팬을 활성화하세요. Gcode 명령: " "M106 P2 S(0-255)" -msgid "Min" -msgstr "최소" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"압출기의 출력 가능한 최저 레이어 높이입니다. 사용된 값은 적응형 레이어 높이" -"를 활성화할 때 최소 레이어 높이를 제한합니다" msgid "Min print speed" msgstr "최소 출력 속도" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"더 나은 레이어 냉각을 위해 속도를 낮추는 경우 위의 최소 레이어 시간을 유지하" -"기 위해 프린터가 느려지는 최소 출력 속도입니다." +"레이어 냉각을 위한 감속이 활성화된 경우 위에 정의된 최소 레이어 시간을 유지하" +"기 위해 프린터가 감속하는 최소 출력 속도입니다." -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "노즐 직경" msgid "Configuration notes" @@ -12034,7 +14538,7 @@ msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" -"여기에 개인 메모를 넣을 수 있습니다. 이 텍스트는 G코드 헤더 설명에 추가됩니" +"여기에 개인 메모를 넣을 수 있습니다. 이 텍스트는 Gcode 헤더 설명에 추가됩니" "다." msgid "Host Type" @@ -12044,13 +14548,13 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." msgstr "" -"Snapmaker Orca은 G코드 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드는 호" +"Snapmaker Orca은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드는 호" "스트의 종류를 포함해야 합니다." msgid "Nozzle volume" msgstr "노즐 부피" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "커터와 노즐 끝단 사이의 노즐 부피" msgid "Cooling tube position" @@ -12073,9 +14577,9 @@ msgid "" "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"필라멘트 교체 순서 중에 압출기 모터 전류를 증가시켜 빠른 래밍 공급 속도를 허" -"용하고 보기 흉한 모양의 팁이 있는 필라멘트를 로드할 때 저항을 극복하는 데 이" -"점이 있습니다." +"필라멘트 교체 순서 중에 압출기 모터 전류를 증가시켜 빠른 채워넣기 공급 속도" +"를 허용하고 보기 흉한 모양의 팁이 있는 필라멘트를 로드할 때 저항을 극복하는 " +"데 이점이 있습니다." msgid "Filament parking position" msgstr "필라멘트 주차 위치" @@ -12084,8 +14588,8 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"빼기 시 필라멘트가 고정되는 위치에서 압출기 끝까지의 거리입니다. 이는 프린터 " -"펌웨어의 값과 일치해야 합니다." +"언로드시 필라멘트가 고정되는 위치에서 압출기 끝까지의 거리입니다. 이는 프린" +"터 펌웨어의 값과 일치해야 합니다." msgid "Extra loading distance" msgstr "추가 압출 거리" @@ -12093,12 +14597,12 @@ msgstr "추가 압출 거리" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" -"0으로 설정하면 압출 중에 필라멘트가 주차 위치에서 이동한 거리는 빼기 중에 다" -"시 이동한 거리와 정확히 동일합니다. 양수이면 더 많이 압출되고, 음수이면 압출 " -"이동이 빼기 이동보다 짧습니다." +"0으로 설정하면 압출 중에 필라멘트가 파킹 위치에서 이동한 거리는 언로드 중에 " +"다시 이동한 거리와 정확히 동일합니다. 양수이면 더 많이 압출되고, 음수이면 압" +"출 이동이 언로드 이동보다 짧습니다." msgid "Start end points" msgstr "시작점과 끝점" @@ -12112,11 +14616,11 @@ msgstr "채우기 후퇴 감소" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "이동 구간이 채우기 영역에 있을 때 수축하지 마십시오. 즉, 스며드는 것을 볼 수 " "없습니다. 이는 복잡한 모델의 후퇴 시간을 줄이고 출력 시간을 절약할 수 있지만 " -"슬라이싱 및 G코드 생성 속도를 느리게 만듭니다" +"슬라이싱 및 Gcode 생성 속도를 느리게 만듭니다" msgid "" "This option will drop the temperature of the inactive extruders to prevent " @@ -12126,60 +14630,60 @@ msgstr "이 옵션은 비활성 압출기의 온도를 낮추어 스며드는 msgid "Filename format" msgstr "파일 이름 형식" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "사용자가 내보낼 파일 이름을 자체 정의할 수 있습니다" msgid "Make overhangs printable" -msgstr "돌출부 형상 변경" +msgstr "오버행 형상 변경" msgid "Modify the geometry to print overhangs without support material." -msgstr "지지대 없이 돌출부를 출력하도록 형상을 수정합니다." +msgstr "서포트 없이 오버행를 출력하도록 형상을 수정합니다." msgid "Make overhangs printable - Maximum angle" -msgstr "돌출부 형상 변경 최대 각도" +msgstr "오버행 형상 변경 최대 각도" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"더 가파른 돌출부를 출력할 수 있게 허용되는 돌출부의 최대 각도. 90°는 형상을 " -"전혀 변경하지 않고 돌출부를 허용하는 반면, 0은 모든 돌출부를 원뿔형 재료로 대" +"더 가파른 오버행를 출력할 수 있게 허용되는 오버행의 최대 각도. 90°는 형상을 " +"전혀 변경하지 않고 오버행를 허용하는 반면, 0은 모든 오버행를 원뿔형 재료로 대" "체합니다." msgid "Make overhangs printable - Hole area" -msgstr "돌출부 형상 변경 구멍 영역" +msgstr "오버행 형상 변경 구멍 영역" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "원뿔형 재료로 채워지기 전에 모델 베이스에 있는 구멍의 최대 면적입니다. 값이 0" "이면 모델 베이스의 모든 구멍이 채워집니다." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" -msgstr "돌출부 벽 감지" +msgstr "오버행 벽 감지" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"선 너비에 비례하여 돌출부 백분율을 감지하고 다른 속도를 사용하여 출력합니다. " -"100%% 돌출부의 경우 브릿지 속도가 사용됩니다." +"선 너비에 비례하여 오버행 백분율을 감지하고 다른 속도를 사용하여 출력합니다. " +"100%% 오버행의 경우 브릿지 속도가 사용됩니다." + +msgid "Filament to print walls." +msgstr "벽을 출력하는 필라멘트" msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "내벽의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "내벽 속도" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "모든 레이어의 벽 수" msgid "Alternate extra wall" @@ -12187,10 +14691,10 @@ msgstr "대체 추가 벽" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -12210,82 +14714,91 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" -"사용자 정의 스크립트를 통해 출력 G코드를 처리하려면 여기에 절대 경로를 나열하" -"세요. 여러 스크립트는 세미콜론(;)으로 구분합니다. 스크립트는 G코드 파일의 절" +"사용자 정의 스크립트를 통해 출력 Gcode를 처리하려면 여기에 절대 경로를 나열하" +"세요. 여러 스크립트는 세미콜론(;)으로 구분합니다. 스크립트는 Gcode 파일의 절" "대 경로를 첫 번째 값으로 전달하며 환경 변수를 읽어 Snapmaker Orca 구성 설정에 접" "근할 수 있습니다." +msgid "Printer type" +msgstr "프린터 유형" + +msgid "Type of the printer." +msgstr "프린터 유형" + msgid "Printer notes" msgstr "프린터 메모" msgid "You can put your notes regarding the printer here." msgstr "여기에 프린터에 관한 메모를 넣을 수 있습니다." +msgid "Printer variant" +msgstr "프린터 변형" + msgid "Raft contact Z distance" msgstr "라프트 접점 Z 거리" -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "개체와 라프트 사이의 Z 거리. 가용성 재료의 접점은 무시됨" +msgid "Z gap between object and raft. Ignored for soluble interface." +msgstr "객체와 라프트 사이의 Z 거리. 가용성 재료의 접점은 무시됨" msgid "Raft expansion" msgstr "라프트 확장" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "XY 평면에서 모든 라프트 레이어 확장" msgid "Initial layer density" msgstr "초기 레이어 밀도" -msgid "Density of the first raft or support layer" -msgstr "첫 번째 라프트 또는 지지대의 밀도" +msgid "Density of the first raft or support layer." +msgstr "첫 번째 라프트 또는 서포트의 밀도" msgid "Initial layer expansion" msgstr "초기 레이어 확장" -msgid "Expand the first raft or support layer to improve bed plate adhesion" -msgstr "베드 플레이트 안착을 향상시키기 위해 첫 번째 라프트 또는 지지대 확장" +msgid "Expand the first raft or support layer to improve bed plate adhesion." +msgstr "베드 플레이트 안착을 향상시키기 위해 첫 번째 라프트 또는 서포트 확장" msgid "Raft layers" msgstr "라프트 레이어" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"개체를 이 레이어 수 많큼 들어올립니다. 이 기능을 사용하여 ABS 출력 시 뒤틀림" +"객체를 이 레이어 수 많큼 들어올립니다. 이 기능을 사용하여 ABS 출력 시 뒤틀림" "(워핑)을 방지합니다" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" -"G코드 경로는 G코드 파일에서 너무 많은 점과 G코드 라인을 방지하기 위해 모델의 " -"윤곽을 단순화한 후 생성됩니다. 작은 값은 높은 해상도와 많은 슬라이스 시간을 " -"의미합니다" +"Gcode 경로는 너무 많은 점과 Gcode 선을 피하기 위해 모델의 윤곽을 단순화한 후 " +"생성됩니다. 값이 작을수록 해상도가 높아지고 슬라이스에 더 많은 시간이 소요됩" +"니다." msgid "Travel distance threshold" msgstr "이동 거리 임계값" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "이동 거리가 이 임계값보다 긴 경우에만 후퇴를 실행합니다" msgid "Retract amount before wipe" -msgstr "닦기 전 후퇴량" +msgstr "노즐 청소 전 후퇴량" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"후퇴 길이에 비례한 닦기 전 후퇴량(닦기를 시작하기 전에 일부 필라멘트를 후퇴시" -"키면 노즐 끝에 녹아있는 소량의 필라멘트만 남게되어 추가 누수 위험이 줄어들 " -"수 있습니다)" +"후퇴 길이에 비례한 노즐 청소 전 후퇴량(노즐 청소를 시작하기 전에 일부 필라멘" +"트를 후퇴시키면 노즐 끝에 녹아있는 소량의 필라멘트만 남게되어 추가 누수 위험" +"이 줄어들 수 있습니다)" msgid "Retract when change layer" msgstr "레이어 변경 시 후퇴" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "레이어 변경 시 강제로 후퇴를 실행합니다" msgid "Retraction Length" @@ -12293,17 +14806,15 @@ msgstr "후퇴 길이" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"긴 이동 중에 필라멘트가 흘러나오는 것을 방지하기 위해 압출기의 일정량의 재료" -"를 뒤로 당깁니다. 후퇴를 비활성화하려면 0을 설정하세요" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "절단 시 긴 후퇴(실험적)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" @@ -12315,44 +14826,53 @@ msgid "Retraction distance when cut" msgstr "절단 시 후퇴 거리" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" -msgstr "실험적 특징.필라멘트 교환시 절단 전 후퇴길이" +"Experimental feature: Retraction length before cutting off during filament " +"change." +msgstr "실험적 기능. 필라멘트 교체 시 절단 전 후퇴 길이." -msgid "Z hop when retract" -msgstr "후퇴 시 Z 올리기" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Z올리기 높이" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "후퇴가 완료될 때마다 노즐이 약간 올라가서 노즐과 출력물 사이에 간격이 생깁니" "다. 이동 시 노즐이 출력물에 닿는 것을 방지합니다. 나선형 선을 사용하여 z를 들" "어 올리면 스트링 현상을 방지할 수 있습니다" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Z 올리기 하한 경계" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Z 올리기는 Z가 이 값보다 크고 \"Z 올리기 상한 경계\" 매개변수 아래인 경우에" "만 적용됩니다." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Z 올리기 상한 경계" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "이 값이 양수인 경우 Z 올리기는 Z가 매개변수 \"Z 올리기 하한 경계\"보다 높고 " "이 값보다 낮을 때만 적용됩니다" -msgid "Z hop type" -msgstr "Z 올리기 유형" +msgid "Z-hop type" +msgstr "Z올리기 유형" + +msgid "Type of Z-hop." +msgstr "" msgid "Slope" msgstr "경사" @@ -12364,11 +14884,11 @@ msgid "Traveling angle" msgstr "이동 각도" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" "경사나 나선형 Z 올리기 유형에 사용할 이동 각도입니다. 90°로 설정할 경우 일반" -"적인 Z 올리기가 적용됩니다" +"적인 Z 올리기가 적용됩니다." msgid "Only lift Z above" msgstr "Z값 위에서만 올리기" @@ -12394,7 +14914,7 @@ msgid "On surfaces" msgstr "표면에서" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Z 올리기 동작을 수행합니다. 이 설정은 위의 설정의 영향을 받습니다 (위에서/아" @@ -12412,6 +14932,18 @@ msgstr "하단 표면만" msgid "Top and Bottom" msgstr "상단 및 하단 표면" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "보우덴" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "재 시작 시 추가 길이" @@ -12431,21 +14963,19 @@ msgstr "" msgid "Retraction Speed" msgstr "후퇴 속도" -msgid "Speed of retractions" -msgstr "후퇴 속도" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "후퇴 복귀 속도" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"필라멘트를 압출기에 다시 로드하는 속도입니다. 0은 후퇴와 동일한 속도를 의미합" -"니다" msgid "Use firmware retraction" -msgstr "펌웨어 후퇴 사용" +msgstr "펌웨어 리트렉션 사용" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " @@ -12461,13 +14991,13 @@ msgid "Disable set remaining print time" msgstr "설정된 남은 출력 시간 비활성화" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" -msgstr "M73 생성 비활성화: 최종 G코드에 남은 출력 시간 설정" +"Disable generating of the M73: Set remaining print time in the final G-code." +msgstr "M73 생성 비활성화: 최종 Gcode에 남은 출력 시간을 설정합니다." msgid "Seam position" -msgstr "솔기 위치" +msgstr "재봉선 위치" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "외벽 각 부분의 출력 시작 위치" msgid "Nearest" @@ -12476,6 +15006,9 @@ msgstr "근접" msgid "Aligned" msgstr "정렬" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "뒷면" @@ -12483,17 +15016,17 @@ msgid "Random" msgstr "무작위" msgid "Staggered inner seams" -msgstr "엇갈린 내부 솔기" +msgstr "엇갈린 내부 재봉선" msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" -"이 옵션을 사용하면 내부 솔기가 깊이에 따라 뒤로 이동하여 지그재그 패턴을 형성" -"합니다." +"이 옵션을 사용하면 내부 재봉선의 깊이에 따라 뒤로 이동하여 지그재그 패턴을 형" +"성합니다." msgid "Seam gap" -msgstr "솔기 간격" +msgstr "재봉선 간격" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -12501,17 +15034,18 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current extruder diameter. The default value for this parameter is 10%." msgstr "" -"폐쇄 루프 압출에서 솔기의 가시성을 줄이기 위해 루프가 중단되고 지정된 양만큼 " -"짧아집니다.\n" -"이 양은 밀리미터로 지정하거나 현재 압출기 직경의 백분율로 지정할 수 있습니" -"다. 이 매개 변수의 기본값은 10%입니다." +"폐쇄 루프 압출에서 재봉선의 가시성을 줄이기 위해 루프가 중단되고 지정된 양만" +"큼 짧아집니다.\n" +"이 양은 mm로 지정하거나 현재 압출기 직경의 백분율로 지정할 수 있습니다. 이 매" +"개 변수의 기본값은 10%입니다." msgid "Scarf joint seam (beta)" -msgstr "스카프 조인트 솔기(베타)" +msgstr "스카프 조인트 재봉선(베타)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"솔기 가시성을 최소화하고 솔기 강도를 높이려면 스카프 조인트를 사용하십시오." +"재봉선 가시성을 최소화하고 재봉선 강도를 높이려면 스카프 조인트를 사용하십시" +"오." msgid "Conditional scarf joint" msgstr "조건부 스카프 조인트" @@ -12520,8 +15054,8 @@ msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"전통적인 솔기가 날카로운 모서리의 솔기를 효과적으로 숨기지 않는 매끄러운 둘레" -"에만 스카프 조인트를 적용하십시오." +"전통적인 재봉선가 날카로운 모서리의 재봉선를 효과적으로 숨기지 않는 매끄러운 " +"둘레에만 스카프 조인트를 적용하십시오." msgid "Conditional angle threshold" msgstr "조건부 각도 임계값" @@ -12533,9 +15067,10 @@ msgid "" "(indicating the absence of sharp corners), a scarf joint seam will be used. " "The default value is 155°." msgstr "" -"이 옵션은 조건부 스카프 접합 솔기를 적용하기 위한 임계값 각도를 설정합니다.\n" +"이 옵션은 조건부 스카프 접합 재봉선를 적용하기 위한 임계값 각도를 설정합니" +"다.\n" "주변 루프 내의 최대 각도가 이 값을 초과하는 경우(뾰족한 모서리가 없음을 나타" -"냄) 스카프 조인트 솔기가 사용됩니다. 기본값은 155°입니다." +"냄) 스카프 조인트 재봉선가 사용됩니다. 기본값은 155°입니다." msgid "Conditional overhang threshold" msgstr "조건부 오버행 임계값" @@ -12558,13 +15093,13 @@ msgstr "스카프 조인트 속도" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "이 옵션은 스카프 조인트의 출력 속도를 설정합니다. 스카프 조인트를 느린 속도" "(100mm/s 미만)로 출력하는 것이 좋습니다. 또한 설정 속도가 외벽 또는 내벽의 속" @@ -12575,7 +15110,7 @@ msgstr "" "습니다." msgid "Scarf joint flow ratio" -msgstr "스카프 조인트 유량 비율" +msgstr "스카프 조인트 압출량 비율" msgid "This factor affects the amount of material for scarf joints." msgstr "이 요소는 스카프 조인트의 재료 양에 영향을 미칩니다." @@ -12589,8 +15124,8 @@ msgid "" "current layer height. The default value for this parameter is 0." msgstr "" "스카프의 시작 높이.\n" -"이 양은 밀리미터 또는 현재 레이어 높이의 백분율로 지정할 수 있습니다. 이 매개" -"변수의 기본값은 0입니다." +"이 양은 mm 또는 현재 레이어 높이의 백분율로 지정할 수 있습니다. 이 매개변수" +"의 기본값은 0입니다." msgid "Scarf around entire wall" msgstr "전체 벽 주위에 스카프" @@ -12621,39 +15156,40 @@ msgid "Use scarf joint for inner walls as well." msgstr "내벽에도 스카프 조인트를 사용하십시오." msgid "Role base wipe speed" -msgstr "역할 기반 닦기 속도" +msgstr "역할 기반 노즐 청소 속도" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"닦기 속도는 현재 압출기의 속도에 따라 결정됩니다. ex)외벽 압출 직후에 닦기 동" -"작을 실행하면 외벽 압출 속도가 닦기에 사용됩니다." +"노즐 청소 속도는 현재 압출기의 속도에 따라 결정됩니다. 예)외벽 압출 직후에 노" +"즐 청소 동작을 실행하면 외벽 압출 속도가 노즐 청소에 사용됩니다." msgid "Wipe on loops" -msgstr "루프에서 닦기" +msgstr "루프에서 노즐 청소" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " "inward movement is executed before the extruder leaves the loop." msgstr "" -"폐쇄 루프 압출에서 솔기의 가시성을 최소화하기 위해 압출기가 루프를 떠나기 전" -"에 안쪽으로의 작은 이동이 실행됩니다." +"폐쇄 루프 압출에서 재봉선의 가시성을 최소화하기 위해 압출기가 루프를 떠나기 " +"전에 안쪽으로의 작은 이동이 실행됩니다." msgid "Wipe before external loop" msgstr "외부 루프 전 닦아내기" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "외부/내부 또는 내부/외부/내부 벽 출력 순서로 출력할 때 외부 둘레 시작 부분에" "서 잠재적인 과잉 압출의 가시성을 최소화하기 위해 외부 둘레 시작 부분에서 내부" @@ -12664,70 +15200,93 @@ msgstr "" "드에서는 후퇴 이동 직후 외부 둘레가 출력될 가능성이 더 높기 때문입니다." msgid "Wipe speed" -msgstr "닦기 속도" +msgstr "노즐 청소 속도" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"닦기 속도는 이 구성에 지정된 속도 설정에 따라 결정됩니다. 값이 백분율(예: " -"80%)로 표시되면 이동 속도 설정을 기준으로 계산됩니다. 이 매개 변수의 기본값" -"은 80%입니다" +"노즐 청소 속도는 이 구성에 지정된 속도 설정에 따라 결정됩니다. 값이 백분율" +"(예: 80%)로 표시되면 이동 속도 설정을 기준으로 계산됩니다. 이 매개 변수의 기" +"본값은 80%입니다." msgid "Skirt distance" msgstr "스커트 거리" -msgid "Distance from skirt to brim or object" -msgstr "스커트와 브림 또는 개체와의 거리" +msgid "The distance from the skirt to the brim or the object." +msgstr "스커트와 브림 또는 객체와의 거리" + +msgid "Skirt start point" +msgstr "스커트 시작점" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"객체 중심에서 스커트 시작점까지의 각도입니다. 0은 가장 올바른 위치이고 시계 " +"반대 방향은 양의 각도입니다." msgid "Skirt height" msgstr "스커트 높이" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "" "얼마나 많은 스커트 레이어를 생성할지 결정합니다. 일반적으로 한개의 레이어를 " "사용합니다" +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" + msgid "Draft shield" -msgstr "드래프트 쉴드" +msgstr "드래프트 실드" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"드래프트 쉴드는 바람으로 인해 ABS 또는 ASA 인쇄물이 뒤틀리거나 인쇄 베드에서 " +"드래프트 실드는 바람으로 인해 ABS 또는 ASA 출력물이 뒤틀리거나 출력 베드에서 " "분리되는 것을 방지하는 데 유용합니다. 일반적으로 오픈 프레임 프린터, 즉 인클" -"로저가 없는 경우에만 필요합니다. \n" +"로저가 없는 경우에만 필요합니다.\n" "\n" -"옵션:\n" -"활성화됨 = 스커트가 가장 높은 인쇄물의 높이와 같습니다.\n" -"제한됨 = 스커트가 스커트 높이에 지정된 높이만큼 높습니다.\n" -"\n" -"참고: 드래프트 쉴드가 활성화되면 스커트는 개체로부터 스커트 거리에 인쇄됩니" +"활성화 = 스커트가 가장 높은 출력물의 높이와 같습니다. 그렇지 않으면 '스커트 " +"높이'가 사용됩니다.\n" +"참고: 드래프트 실드가 활성화되면 스커트는 객체로부터 스커트 거리에 출력됩니" "다. 따라서 챙이 활성화된 경우 챙과 교차할 수 있습니다. 이를 방지하려면 스커" "트 거리 값을 늘리십시오.\n" -msgid "Limited" -msgstr "제한됨" - msgid "Enabled" msgstr "활성화" +msgid "Skirt type" +msgstr "스커트 유형" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "결합 - 모든 객체에 대한 단일 스커트, 객체별 - 개별 객체 스커트." + +msgid "Per object" +msgstr "객체당" + msgid "Skirt loops" msgstr "스커트 루프" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "스커트의 루프 수입니다. 0은 스커트 비활성화를 의미합니다" msgid "Skirt speed" @@ -12743,53 +15302,64 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"스커트를 인쇄할 때 최소 필라멘트 압출 길이(mm)입니다. 0은 이 기능이 비활성화" +"스커트를 출력할 때 최소 필라멘트 압출 길이(mm)입니다. 0은 이 기능이 비활성화" "되었음을 의미합니다.\n" "\n" -"프린터가 프라임 라인 없이 인쇄하도록 설정된 경우 0이 아닌 값을 사용하는 것이 " -"유용합니다." +"프린터가 프라임 라인 없이 출력하도록 설정된 경우 0이 아닌 값을 사용하는 것이 " +"유용합니다.\n" +"루프의 최종 수는 객체 거리를 정렬하거나 검증하는 동안 고려되지 않습니다. 그러" +"한 경우에는 루프 수를 늘리십시오." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" -"G코드의 출력 속도는 예상 레이어 시간이 이 값보다 짧은 경우 레이어의 냉각을 개" -"선하기 위해 느려집니다" +"Gcode의 출력 속도는 예상 레이어 시간이 이 값보다 짧은 경우 레이어의 냉각을 개" +"선하기 위해 느려집니다." msgid "Minimum sparse infill threshold" msgstr "최소 드문 채우기 임계값" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "임계값보다 작은 드문 채우기 영역은 꽉찬 내부 채우기로 대체됩니다" +msgid "Solid infill" +msgstr "솔리드 채우기" + +msgid "Filament to print solid infill." +msgstr "솔리드 인필을 출력하는 필라멘트" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" "꽉찬 내부 채우기 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "상단 및 하단 표면을 제외한 꽉찬 내부 채우기 속도" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"나선형은 외부 윤곽선의 z 이동을 부드럽게 합니다. 그리고 개체를 꽉찬 하단 레이" -"어가 있는 단일 벽으로 출력합니다. 최종 생성된 출력물에는 솔기가 없습니다" +"나선형은 외부 윤곽선의 z 이동을 부드럽게 합니다. 그리고 객체를 꽉찬 하단 레이" +"어가 있는 단일 벽으로 출력합니다. 최종 생성된 출력물에는 재봉선가 없습니다" msgid "Smooth Spiral" msgstr "부드러운 나선형" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "부드러운 나선형은 X와 Y의 움직임을 매끄럽게 처리하여 수직이 아닌 벽의 XY 방향" "에서도 이음새가 전혀 보이지 않습니다" @@ -12797,13 +15367,41 @@ msgstr "" msgid "Max XY Smoothing" msgstr "최대 XY 스무딩" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "부드러운 나선형을 얻기 위해 점을 XY로 이동하는 최대 거리 %로 표시할 경우 노" "즐 직경에 대해 계산됩니다" +msgid "Spiral starting flow ratio" +msgstr "나선형 시작 유량비" + +#, fuzzy, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"마지막 하단 레이어에서 나선형으로 전환하는 동안 시작 압출량 비율을 설정합니" +"다. 일반적으로 나선형 전환은 첫 번째 루프 동안 압출량 비율을 0% 에서 100% 로 " +"스케일링하므로 경우에 따라 나선형 시작 시 압출이 미달될 수 있습니다." + +msgid "Spiral finishing flow ratio" +msgstr "나선형 종료 유량비" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"나선형을 끝내는 동안 마무리 압출량을 설정합니다. 일반적으로 나선형 전환은 마" +"지막 루프 동안 압출량 비율을 100% 에서 0% 로 스케일링하므로 경우에 따라 나선" +"형 끝에서 압출이 미달될 수 있습니다." + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " @@ -12830,7 +15428,7 @@ msgstr "온도 가변" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "" "Temperature difference to be applied when an extruder is not active. The " -"value is not used when 'idle_temperature' in filament settings is set to non " +"value is not used when 'idle_temperature' in filament settings is set to non-" "zero value." msgstr "" "압출기가 작동하지 않을 때 적용되는 온도차입니다. 필라멘트 설정의 " @@ -12853,25 +15451,25 @@ msgid "Preheat steps" msgstr "예열 단계" msgid "" -"Insert multiple preheat commands(e.g. M104.1). Only useful for Prusa XL. For " -"other printers, please set it to 1." +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." msgstr "" "여러 예열 명령(예: M104.1)을 삽입하세요. Prusa XL에만 유용합니다. 다른 프린터" "의 경우 1로 설정하세요." msgid "Start G-code" -msgstr "시작 G코드" +msgstr "시작 Gcode" -msgid "Start G-code when start the whole printing" -msgstr "전체 출력을 시작할 때의 시작 G코드" +msgid "Start G-code when starting the entire print." +msgstr "출력을 시작할 때의 Gcode" -msgid "Start G-code when start the printing of this filament" -msgstr "이 필라멘트의 출력을 시작할 때의 시작 G코드" +msgid "Start G-code when starting the printing of this filament." +msgstr "이 필라멘트의 출력을 시작할 때의 시작 Gcode" msgid "Single Extruder Multi Material" msgstr "단일 압출기 다중 재료" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "단일 노즐을 사용하여 다중 필라멘트 출력" msgid "Manual Filament Change" @@ -12884,7 +15482,7 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"출력 시작 시에만 사용자 정의 필라멘트 변경 G코드를 생략하려면 이 옵션을 활성" +"출력 시작 시에만 사용자 정의 필라멘트 변경 Gcode를 생략하려면 이 옵션을 활성" "화합니다. 툴 변경 명령(예: T0)은 전체 출력 과정에서 건너뜁니다. 이는 M600/" "PAUSE를 사용하여 수동 필라멘트 교체 작업을 실행하는 수동 다중 재료 출력에 유" "용합니다." @@ -12892,24 +15490,24 @@ msgstr "" msgid "Purge in prime tower" msgstr "프라임 타워에서 청소" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "남은 필라멘트를 프라임 타워에서 제거" msgid "Enable filament ramming" -msgstr "필라멘트 래밍 활성화" +msgstr "" msgid "No sparse layers (beta)" msgstr "희소 레이어 없음(베타)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"활성화되면 툴 체인지 없이 레이어에 닦기 타워가 출력되지 않습니다. 툴 체인지" -"가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 닦기 타워를 출력합니다. 출" -"력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다." +"활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지" +"가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. " +"출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다." msgid "Prime all printing extruders" msgstr "모든 활성화된 압출기 프라이밍" @@ -12929,7 +15527,7 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"간격 폐쇄 반경의 2배보다 작은 균열은 삼각형 메쉬 슬라이싱 중에 채워집니다. 간" +"간격 폐쇄 반경의 2배보다 작은 균열은 삼각형 메시 슬라이싱 중에 채워집니다. 간" "격 채우기 작업은 최종 출력 해상도를 감소시킬 수 있으므로 값을 합리적으로 낮" "게 유지하는 것이 좋습니다." @@ -12961,54 +15559,60 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"이 값은 출력 G코드의 모든 Z 좌표에 더해지거나 뺍니다. 이는 잘못된 Z 엔드스톱 " +"이 값은 출력 Gcode의 모든 Z 좌표에 더해지거나 뺍니다. 이는 잘못된 Z 엔드스톱 " "위치를 보정하는 데 사용됩니다. 예를 들어 엔드스톱 제로가 실제로 출력 베드에" "서 노즐을 0.3mm 멀리 벗어나는 경우 이 값을 -0.3으로 설정합니다 (또는 엔드스톱" "을 직접 수정하세요)." msgid "Enable support" -msgstr "지지대 사용" +msgstr "서포트 사용" msgid "Enable support generation." -msgstr "지지대 생성을 활성화 합니다." +msgstr "서포트 생성을 활성화 합니다." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"일반(자동) 및 나무(자동)은 지지대를 자동으로 생성합니다. 일반(수동) 또는 나무" -"(수동) 선택시에는 강제된 지지대만 생성됩니다" +"일반(자동) 및 트리(자동)는 서포트를 자동으로 생성하는 데 사용됩니다. 일반(수" +"동) 또는 트리(수동)를 선택하면 서포트 시행자만 생성됩니다." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "일반(자동)" -msgid "tree(auto)" -msgstr "나무(자동)" +msgid "Tree (auto)" +msgstr "트리(자동)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "일반(수동)" -msgid "tree(manual)" -msgstr "나무(수동)" +msgid "Tree (manual)" +msgstr "트리(수동)" -msgid "Support/object xy distance" -msgstr "지지대/개체 XY 거리" +msgid "Support/object XY distance" +msgstr "서포트/객체 XY 거리" -msgid "XY separation between an object and its support" -msgstr "개체와 지지대를 분리하는 XY 간격" +msgid "XY separation between an object and its support." +msgstr "객체와 서포트를 분리하는 XY 간격" + +msgid "Support/object first layer gap" +msgstr "서포트/객체 첫 번째 레이어 간격" + +msgid "XY separation between an object and its support at the first layer." +msgstr "첫 번째 레이어에서 객체와 서포트 사이의 XY 분리." msgid "Pattern angle" msgstr "패턴 각도" msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "이 설정을 사용하여 수평면에서 지지대 패턴을 회전합니다." +msgstr "이 설정을 사용하여 수평면에서 서포트 패턴을 회전합니다." msgid "On build plate only" msgstr "빌드 플레이트에만 생성" -msgid "Don't create support on model surface, only on build plate" -msgstr "모델 표면에 지지대를 생성하지 않고 빌드 플레이트에만 생성합니다" +msgid "Don't create support on model surface, only on build plate." +msgstr "모델 표면에 서포트를 생성하지 않고 빌드 플레이트에만 생성합니다" msgid "Support critical regions only" msgstr "위험한 지역에만 생성" @@ -13018,34 +15622,34 @@ msgid "" "etc." msgstr "" "날카로운 꼬리, 외팔보(항공기 날개처럼 튀어나온 구조 by MMT) 등과 같이 위험한 " -"부위에 대해서만 지지대를 생성합니다." +"부위에 대해서만 서포트를 생성합니다." -msgid "Remove small overhangs" -msgstr "작은 돌출부 지지대 제거" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "지지대가 필요하지 않은 작은 돌출부에서 지지대를 제거합니다." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "상단 Z 거리" -msgid "The z gap between the top support interface and object" -msgstr "지지대 상단과 개체 접점의 간격" +msgid "The Z gap between the top support interface and object." +msgstr "서포트 상단과 객체 접점의 간격" msgid "Bottom Z distance" msgstr "하단 Z 거리" -msgid "The z gap between the bottom support interface and object" -msgstr "지지대 하단과 개체 접점의 간격" +msgid "The Z gap between the bottom support interface and object." +msgstr "서포트 하단과 객체 접점의 간격" msgid "Support/raft base" -msgstr "지지대/라프트 기본" +msgstr "서포트/라프트 기본" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"기본 지지대 및 라프트를 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특" +"기본 서포트 및 라프트를 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특" "정 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다" msgid "Avoid interface filament for base" @@ -13054,12 +15658,12 @@ msgstr "베이스용 인터페이스 필라멘트 줄이기" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"지지대 베이스를 프린트하기 위해 지지대 인터페이스 필라멘트를 사용하지 마세요." +"서포트 베이스를 프린트하기 위해 서포트 인터페이스 필라멘트를 사용하지 마세요." msgid "" "Line width of support. If expressed as a %, it will be computed over the " "nozzle diameter." -msgstr "지지대의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." +msgstr "서포트의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "Interface use loop pattern" msgstr "접점에서 루프 패턴 사용" @@ -13067,28 +15671,28 @@ msgstr "접점에서 루프 패턴 사용" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"지지대 상단 접촉 레이어를 루프로 덮습니다. 기본적으로 비활성화되어 있습니다." +"서포트 상단 접촉 레이어를 루프로 덮습니다. 기본적으로 비활성화되어 있습니다." msgid "Support/raft interface" -msgstr "지지대/라프트 접점" +msgstr "서포트/라프트 접점" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"지지대 및 라프트 접점을 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특" +"서포트 및 라프트 접점을 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특" "정 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다" msgid "Top interface layers" msgstr "상단 접점 레이어" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "상단 접점 레이어 수" msgid "Bottom interface layers" msgstr "하단 접점 레이어" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "하단 인터페이스 레이어 수" msgid "Same as top" @@ -13097,23 +15701,25 @@ msgstr "위와 동일" msgid "Top interface spacing" msgstr "상단 접점 선 간격" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "상단 접점 선의 간격. 0은 꽉찬 접점을 의미합니다" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "하단 접점 선 간격" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "하단 접점 선의 간격. 0은 꽉찬 접점을 의미합니다" -msgid "Speed of support interface" -msgstr "지지대 접점 속도" +msgid "Speed of support interface." +msgstr "서포트 접점 속도" msgid "Base pattern" msgstr "기본 패턴" -msgid "Line pattern of support" -msgstr "지지대 기본 패턴" +msgid "Line pattern of support." +msgstr "서포트 기본 패턴" msgid "Rectilinear grid" msgstr "직선 격자" @@ -13127,10 +15733,10 @@ msgstr "접점 패턴" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" -"지지대 접점의 선 패턴. 비가용성 지지대 접점의 기본 패턴은 직선인 반면 가용성 " -"지지대 접점의 기본 패턴은 동심입니다" +"서포트 접점의 선 패턴. 비가용성 서포트 접점의 기본 패턴은 직선인 반면 가용성 " +"서포트 접점의 기본 패턴은 동심입니다" msgid "Rectilinear Interlaced" msgstr "엇갈린 직선" @@ -13138,17 +15744,17 @@ msgstr "엇갈린 직선" msgid "Base pattern spacing" msgstr "기본 패턴 간격" -msgid "Spacing between support lines" -msgstr "지지대 선 사이의 간격" +msgid "Spacing between support lines." +msgstr "서포트 선 사이의 간격" msgid "Normal Support expansion" -msgstr "일반 지지대 확장" +msgstr "일반 서포트 확장" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "일반 지지대의 수평 범위를 확대(+) 또는 축소(-)합니다" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." +msgstr "일반 서포트의 수평 범위를 확대(+) 또는 축소(-)합니다" -msgid "Speed of support" -msgstr "지지대 속도" +msgid "Speed of support." +msgstr "서포트 속도" msgid "" "Style and shape of the support. For normal support, projecting the supports " @@ -13159,36 +15765,39 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" -"지지대의 스타일과 모양. 일반 지지대의 경우, 격자는 보다 안정적인 지지대(기본" -"값)가 생성되는 반면, 맞춤 지지대는 재료를 절약하고 지지대 자국을 줄입니다.\n" -"나무 지지대의 경우, 얇은 및 유기체 모양은 가지를 보다 적극적으로 병합하고 많" -"은 재료를 절약합니다(기본값 유기체). 반면 혼합 모양은 크고 평평한 돌출부 아래" -"에 일반 지지대와 유사한 구조를 만듭니다." +"서포트의 스타일과 모양. 일반 서포트의 경우, 격자는 보다 안정적인 서포트(기본" +"값)가 생성되는 반면, 맞춤 서포트는 재료를 절약하고 서포트 자국을 줄입니다.\n" +"트리 서포트의 경우, 얇은 및 유기체 모양은 가지를 보다 적극적으로 병합하고 많" +"은 재료를 절약합니다(기본값 유기체). 반면 혼합 모양은 크고 평평한 오버행 아래" +"에 일반 서포트와 유사한 구조를 만듭니다." + +msgid "Default (Grid/Organic)" +msgstr "기본값(그리드/오가닉)" msgid "Snug" msgstr "맞춤" -msgid "Tree Slim" -msgstr "얇은 나무" - -msgid "Tree Strong" -msgstr "강한 나무" - -msgid "Tree Hybrid" -msgstr "혼합 나무" - msgid "Organic" msgstr "유기체" +msgid "Tree Slim" +msgstr "얇은 트리" + +msgid "Tree Strong" +msgstr "강한 트리" + +msgid "Tree Hybrid" +msgstr "혼합 트리" + msgid "Independent support layer height" -msgstr "독립적 지지대 레이어 높이" +msgstr "독립적 서포트 레이어 높이" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"지지대 레이어는 개체 레이어와 독립적인 레이어 높이를 사용합니다. 이것은 Z 거" +"서포트 레이어는 객체 레이어와 독립적인 레이어 높이를 사용합니다. 이것은 Z 거" "리 사용자 정의를 지원하고 출력 시간을 절약하기 위한 것입니다. 프라임 타워가 " "활성화되면 이 옵션은 유효하지 않습니다." @@ -13198,22 +15807,33 @@ msgstr "임계값 각도" msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." -msgstr "경사각이 임계값 미만인 돌출부에 지지대가 생성됩니다." +msgstr "경사각이 임계값 미만인 오버행에 서포트가 생성됩니다." -msgid "Tree support branch angle" -msgstr "나무 지지대 가지 각도" +msgid "Threshold overlap" +msgstr "임계값 중복" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"임계각이 0이면 오버행이 임계값 미만인 오버행에 대한 서포트가 생성됩니다. 이 " +"값이 작을수록 서포트 없이 출력할 수 있는 오버행이 가파르게 됩니다." + +msgid "Tree support branch angle" +msgstr "트리 서포트 가지 각도" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"이 설정은 나무 지지대의 가지가 만들 수 있는 돌출부의 최대 각도를 결정합니다. " +"이 설정은 트리 서포트의 가지가 만들 수 있는 오버행의 최대 각도를 결정합니다. " "각도가 증가하면 가지가 멀리까지 닿을 수 있도록 더 수평으로 출력될 수 있습니" "다." msgid "Preferred Branch Angle" -msgstr "선호 가지 각도" +msgstr "선호하는 가지 각도" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "" @@ -13226,11 +15846,11 @@ msgstr "" "를 사용하세요." msgid "Tree support branch distance" -msgstr "나무 지지대 가지 거리" +msgstr "트리 서포트 가지 거리" msgid "" "This setting determines the distance between neighboring tree support nodes." -msgstr "이 설정은 인접한 나무 지지대 지점 간의 거리를 결정합니다." +msgstr "이 설정은 인접한 트리 서포트 지점 간의 거리를 결정합니다." msgid "Branch Density" msgstr "가지 밀도" @@ -13243,44 +15863,34 @@ msgid "" "interfaces instead of a high branch density value if dense interfaces are " "needed." msgstr "" -"가지 끝을 생성하는 데 사용되는 지지대의 밀도를 조정합니다. 값이 높을수록 돌출" -"부가 더 좋아지지만 지지대를 제거하기가 더 어렵습니다. 따라서 조밀한 인터페이" +"가지 끝을 생성하는 데 사용되는 서포트의 밀도를 조정합니다. 값이 높을수록 오버" +"행가 더 좋아지지만 서포트를 제거하기가 더 어렵습니다. 따라서 조밀한 인터페이" "스가 필요한 경우 높은 가지 밀도 값 대신 상단 지지 인터페이스를 활성화하는 것" "이 좋습니다." -msgid "Adaptive layer height" -msgstr "적응형 레이어 높이" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"이 옵션을 활성화하면 첫 번째 레이어를 제외한 나무 지지대의 레이어 높이가 자동" -"으로 계산됩니다 " - msgid "Auto brim width" -msgstr "나무 지지대 자동 브림 너비" +msgstr "트리 서포트 자동 브림 너비" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" -msgstr "옵션을 활성화하면 나무 지지대의 브림 너비가 자동으로 계산됩니다" +"automatically calculated." +msgstr "옵션을 활성화하면 트리 서포트의 브림 너비가 자동으로 계산됩니다" msgid "Tree support brim width" -msgstr "나무 지지대 브림 너비" +msgstr "트리 서포트 브림 너비" -msgid "Distance from tree branch to the outermost brim line" -msgstr "나무 지지대 가지에서 가장 바깥쪽 브림까지의 거리" +msgid "Distance from tree branch to the outermost brim line." +msgstr "트리 서포트 가지에서 가장 바깥쪽 브림까지의 거리" msgid "Tip Diameter" -msgstr "끝 직경" +msgstr "노즐 직경" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." msgstr "유기 지지체의 가지 끝 직경." msgid "Tree support branch diameter" -msgstr "나무 지지대 가지 직경" +msgstr "트리 서포트 가지 직경" msgid "This setting determines the initial diameter of support nodes." msgstr "이 설정은 지지 노드의 초기 직경을 결정합니다." @@ -13297,67 +15907,113 @@ msgid "" "support." msgstr "" "아래로 갈수록 가지의 직경이 점차 굵어지는 각도. 각도가 0이면 가지가 균일한 두" -"께를 가지는 가지가 됩니다. 약간의 각도는 유기체 지지대의 안정성을 증가시킬 " +"께를 가지는 가지가 됩니다. 약간의 각도는 유기체 서포트의 안정성을 증가시킬 " "수 있습니다." -msgid "Branch Diameter with double walls" -msgstr "이중 벽이 있는 가지 직경" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"이 직경의 원 면적보다 더 큰 면적을 가진 가지는 안정성을 위해 이중벽으로 출력" -"됩니다. 이중벽을 허용하지 않으려면 이 값을 0으로 설정합니다." - msgid "Support wall loops" -msgstr "지지대 벽 루프" +msgstr "서포트 벽 루프" -msgid "This setting specify the count of walls around support" -msgstr "이 설정은 지지대 주변의 벽 수를 지정합니다" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"이 설정은 [0,2] 범위에서 지지벽의 개수를 지정합니다. 0은 자동을 의미합니다." msgid "Tree support with infill" -msgstr "채우기가 있는 나무 지지대" +msgstr "채우기가 있는 트리 서포트" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." +msgstr "" +"이 설정은 트리 서포트의 큰 공동 내부에 채우기를 추가할지 여부를 지정합니다" + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" msgstr "" -"이 설정은 나무 지지대의 큰 공동 내부에 채우기를 추가할지 여부를 지정합니다" msgid "Activate temperature control" msgstr "온도 제어 활성화" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"챔버 온도 제어를 위해 이 옵션을 활성화합니다. M191 명령이 " -"\"machine_start_gcode\" 앞에 추가됩니다.\n" -"G코드 명령: M141/M191 S(0-255)" +"자동화된 챔버 온도 제어를 위해 이 옵션을 활성화합니다. 이 옵션은 " +"\"machine_start_gcode\" 이전에 M191 명령 내보내기를 활성화합니다.\n" +" 챔버 온도를 설정하고 온도에 도달할 때까지 기다립니다. 또한 출력가 끝나면 챔" +"버 히터를 끄는 M141 명령을 내보냅니다(있는 경우).\n" +"\n" +"이 옵션은 매크로를 통해 또는 기본적으로 M191 및 M141 명령을 지원하는 펌웨어" +"에 의존하며 일반적으로 활성 챔버 히터가 설치된 경우 사용됩니다." msgid "Chamber temperature" msgstr "챔버 온도" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"챔버 온도가 높을수록 뒤틀림을 억제하거나 줄이는 데 도움이 될 수 있으며 잠재적" -"으로 ABS, ASA, PC, PA 등과 같은 고온 재료의 층간 결합 강도가 높아질 수 있습니" -"다. 동시에 ABS 및 ASA의 공기 여과는 더욱 악화됩니다. PLA, PETG, TPU, PVA 및 " -"기타 저온 재료의 경우 막힘을 방지하려면 실제 챔버 온도가 높지 않아야 하므로 " -"꺼짐을 의미하는 0을 적극 권장합니다" +"ABS, ASA, PC 및 PA와 같은 고온 재료의 경우 챔버 온도가 높을수록 뒤틀림을 억제" +"하거나 줄이는 데 도움이 될 수 있으며 잠재적으로 층간 결합 강도가 높아질 수 있" +"습니다. 그러나 동시에 챔버 온도가 높을수록 ABS 및 ASA의 공기 여과 효율성이 감" +"소합니다.\n" +"\n" +"PLA, PETG, TPU, PVA 및 기타 저온 재료의 경우 열 차단 시 재료 연화로 인한 압출" +"기 막힘을 방지하기 위해 챔버 온도가 낮아야 하므로 이 옵션을 비활성화(0으로 설" +"정)해야 합니다.\n" +"\n" +"활성화된 경우 이 매개변수는 원하는 챔버 온도를 출력 시작 매크로 또는 " +"PRINT_START(기타 변수) CHAMBER_TEMP=[chamber_temp]와 같은 열 흡수 매크로에 전" +"달하는 데 사용할 수 있는 Chamber_temp라는 Gcode 변수도 설정합니다. 이는 프린" +"터가 M141/M191 명령을 지원하지 않거나 활성 챔버 히터가 설치되지 않은 경우 출" +"력 시작 매크로에서 열 흡수를 처리하려는 경우 유용할 수 있습니다." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "초기 레이어 이후의 노즐 온도" msgid "Detect thin wall" @@ -13365,27 +16021,27 @@ msgstr "얇은 벽 감지" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "두개의 선 너비를 포함할 수 없는 얇은 벽을 감지합니다. 그리고 한 선으로 출력합" "니다. 폐쇄 루프가 아니기 때문에 출력이 잘 되지 않을 수 있습니다" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -"이 G코드는 툴 체인지을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩" +"이 Gcode는 툴 체인지을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩" "니다" -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "이 G코드는 압출 역할이 변경될 때 삽입됩니다" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "이 Gcode는 압출 역할이 변경될 때 삽입됩니다" msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "상단 표면의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "꽉찬 상단 표면 채우기 속도" msgid "Top shell layers" @@ -13394,7 +16050,7 @@ msgstr "상단 쉘 레이어" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "상단 표면을 포함한 상단 쉘의 꽉찬 레이어 수입니다. 이 값으로 계산한 두께가 상" "단 쉘 두께보다 얇으면 상단 쉘 레이어가 증가합니다" @@ -13409,37 +16065,57 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "상단 쉘 레이어로 계산된 두께가 이 값보다 얇은 경우 슬라이싱할 때 상단 꽉찬 레" "이어의 수가 증가합니다. 이렇게 하면 레이어 높이가 작을 때 쉘이 너무 얇아지는 " "것을 방지할 수 있습니다. 0은 이 설정이 비활성화되고 상단 쉘의 두께가 절대적으" "로 상단 쉘 레이어에 의해 결정됨을 의미합니다" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "압출이 없을 때의 이동 속도" msgid "Wipe while retracting" -msgstr "후퇴 시 닦기" +msgstr "후퇴 시 노즐 청소" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"노즐에서 누출된 재료를 청소하기 위해 후퇴할 때 마지막 압출 경로를 따라 노즐" -"을 이동합니다. 이동 후 출력을 시작할 때 방울(blob)을 최소화할 수 있습니다" +"노즐에서 흘러내린된 재료를 청소하기 위해 후퇴할 때 마지막 압출 경로를 따라 노" +"즐을 이동합니다. 이동 후 출력을 시작할 때 방울을 최소화할 수 있습니다." msgid "Wipe Distance" -msgstr "닦기 거리" +msgstr "노즐 청소 거리" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -13457,8 +16133,14 @@ msgid "" "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"닦기 타워는 개체를 출력할 때 외관 결함을 방지하기 위해 노즐의 잔류물을 청소하" -"고 노즐 내부의 압력을 안정화하는 데 사용할 수 있습니다." +"프라임 타워는 객체를 출력할 때 외관 결함을 방지하기 위해 노즐의 잔류물을 청소" +"하고 노즐 내부의 압력을 안정화하는 데 사용할 수 있습니다." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "버리기 볼륨" @@ -13473,19 +16155,24 @@ msgstr "" "실제 버리기 볼륨은 버리기 승수에 테이블의 버리기 볼륨을 곱한 것과 같습니다." msgid "Prime volume" -msgstr "프라임 부피" +msgstr "프라임양" msgid "The volume of material to prime extruder on tower." msgstr "탑에서 압출을 실행할 재료의 부피." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "프라임 타워의 너비" msgid "Wipe tower rotation angle" -msgstr "닦기 타워 회전 각도" +msgstr "프라임 타워 회전 각도" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "X축 기준의 닦기 타워 회전 각도." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "X축 기준의 프라임 타워 회전 각도." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" msgid "Stabilization cone apex angle" msgstr "안정화 원뿔 정점 각도" @@ -13494,11 +16181,11 @@ msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"닦기 타워를 안정화하는 데 사용되는 원뿔 꼭대기의 각도입니다. 각도가 클수록 베" -"이스가 넓어집니다." +"프라임 타워를 안정화하는 데 사용되는 원뿔 꼭대기의 각도입니다. 각도가 클수록 " +"베이스가 넓어집니다." msgid "Maximum wipe tower print speed" -msgstr "최대 와이프 타워 인쇄 속도" +msgstr "프라임 타워 최대 속도" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " @@ -13514,18 +16201,18 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" -"와이프 타워에서 퍼징하고 와이프 타워 희박 레이어를 인쇄할 때 최대 인쇄 속도입" -"니다. 퍼징 시 희소 충전 속도 또는 필라멘트 최대 체적 속도에서 계산된 속도가 " -"더 낮은 경우 가장 낮은 속도가 대신 사용됩니다.\n" +"와이프 타워에서 버리기하고 와이프 타워 희박 레이어를 출력할 때 최대 출력 속도" +"입니다. 버리기 시 희소 충전 속도 또는 필라멘트 최대 압출 속도에서 계산된 속도" +"가 더 낮은 경우 가장 낮은 속도가 대신 사용됩니다.\n" "\n" -"희소 레이어를 인쇄할 때 내부 주변 속도 또는 필라멘트 최대 체적 속도에서 계산" +"희소 레이어를 출력할 때 내부 주변 속도 또는 필라멘트 최대 압출 속도에서 계산" "된 속도가 더 낮은 경우 가장 낮은 속도가 대신 사용됩니다.\n" "\n" "이 속도를 높이면 타워의 안정성에 영향을 줄 수 있을 뿐만 아니라 노즐이 와이프 " @@ -13537,31 +16224,76 @@ msgstr "" "\n" "와이프 타워 외부 경계의 경우 이 설정에 관계없이 내부 경계 속도가 사용됩니다." +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" + msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"닦기 타워의 둘레를 출력할 때 사용하는 압출기입니다. 사용 가능한 압출기를 사용" -"하려면 0으로 설정하세요(비가용성 재료가 적절함)." +"프라임 타워의 둘레를 출력할 때 사용하는 압출기입니다. 사용 가능한 압출기를 사" +"용하려면 0으로 설정하세요 (비가용성 재료가 적절합니다)." msgid "Purging volumes - load/unload volumes" -msgstr "제거 부피 - 넣기/빼기 부피" +msgstr "버리기량 - 로드/언로드량" msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" -"이 벡터는 닦기 타워에서 사용되는 각 툴을 교체하는 데 필요한 부피을 저장합니" +"이 벡터는 프라임 타워에서 사용되는 각 툴을 교체하는 데 필요한 부피을 저장합니" "다. 이러한 값은 아래의 전체 청소 부피 생성을 단순화하는 데 사용됩니다." +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " "printed with transparent filament, the mixed color infill will be seen " "outside. It will not take effect, unless the prime tower is enabled." msgstr "" -"필라멘트 교체 후 버리기는 개체의 채우기 내부에서 수행됩니다. 이렇게 하면 낭비" +"필라멘트 교체 후 버리기는 객체의 채우기 내부에서 수행됩니다. 이렇게 하면 낭비" "되는 양이 줄어들고 출력 시간이 단축될 수 있습니다. 벽이 투명 필라멘트로 출력" "된 경우 혼합 색상 충전재가 외부에 보입니다. 프라임 타워가 활성화되지 않으면 " "적용되지 않습니다." @@ -13571,30 +16303,30 @@ msgid "" "lower the amount of waste and decrease the print time. It will not take " "effect, unless the prime tower is enabled." msgstr "" -"필라멘트 변경 후 버리기는 개체의 지지대 내부에서 수행됩니다. 이렇게 하면 낭비" +"필라멘트 변경 후 버리기는 객체의 서포트 내부에서 수행됩니다. 이렇게 하면 낭비" "되는 양이 줄어들고 출력 시간이 단축될 수 있습니다. 프라임 타워가 활성화되지 " "않으면 적용되지 않습니다." msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"이 개체는 필라멘트를 절약하고 출력 시간을 줄이기 위해 필라멘트 변경 후 노즐" -"에 남은 잔류물을 제거하는 데 사용됩니다. 결과적으로 개체의 색상이 혼합됩니" +"이 객체는 필라멘트를 절약하고 출력 시간을 줄이기 위해 필라멘트 변경 후 노즐" +"에 남은 잔류물을 제거하는 데 사용됩니다. 결과적으로 객체의 색상이 혼합됩니" "다. 기본 타워가 활성화되지 않으면 적용되지 않습니다." msgid "Maximal bridging distance" msgstr "최대 브릿지 거리" msgid "Maximal distance between supports on sparse infill sections." -msgstr "드문 채우기 부분의 지지대 사이의 최대 거리." +msgstr "드문 채우기 부분의 서포트 사이의 최대 거리." msgid "Wipe tower purge lines spacing" -msgstr "닦기 타워 청소 선 간격" +msgstr "프라임 타워 청소 선 간격" msgid "Spacing of purge lines on the wipe tower." -msgstr "닦기 타워의 청소 선 간격입니다." +msgstr "프라임 타워의 청소 선 간격입니다." msgid "Extra flow for purging" msgstr "퍼지를 위한 추가 흐름" @@ -13611,37 +16343,40 @@ msgid "Idle temperature" msgstr "공회전 온도" msgid "" -"Nozzle temperature when the tool is currently not used in multi-tool setups." +"Nozzle temperature when the tool is currently not used in multi-tool setups. " "This is only used when 'Ooze prevention' is active in Print Settings. Set to " "0 to disable." msgstr "" -"도구가 현재 다중 도구 설정에서 사용되지 않을 때의 노즐 온도. 이는 인쇄 설정에" -"서 '얼룩 방지'가 활성화된 경우에만 사용됩니다. 비활성화하려면 0으로 설정합니" -"다." +"도구가 현재 다중 도구 설정에서 사용되지 않을 때의 노즐 온도. 이는 출력 설정에" +"서 '흘러내림 방지'가 활성화된 경우에만 사용됩니다. 비활성화하려면 0으로 설정" +"합니다." msgid "X-Y hole compensation" msgstr "X-Y 구멍 보정" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"개체의 구멍(Holes)은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 " -"값은 구멍을 더 크게 만듭니다. 음수 값은 구멍을 더 작게 만듭니다. 이 기능은 개" -"체의 조립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다" +"객체의 구멍은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 값은 구" +"멍을 더 크게 만듭니다. 음수 값은 구멍을 더 작게 만듭니다. 이 기능은 개체의 조" +"립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다" msgid "X-Y contour compensation" msgstr "X-Y 윤곽 보상" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"개체의 윤곽은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 값은 윤" -"곽선을 더 크게 만듭니다. 음수 값은 윤곽선을 더 작게 만듭니다. 이 기능은 개체" +"객체의 윤곽은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 값은 윤" +"곽선을 더 크게 만듭니다. 음수 값은 윤곽선을 더 작게 만듭니다. 이 기능은 객체" "의 조립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다" msgid "Convert holes to polyholes" @@ -13666,7 +16401,7 @@ msgstr "폴리홀 감지 마진" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13683,7 +16418,7 @@ msgid "Rotate the polyhole every layer." msgstr "레이어마다 폴리홀을 회전시킵니다." msgid "G-code thumbnails" -msgstr "G코드 미리보기" +msgstr "Gcode 미리보기" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " @@ -13693,22 +16428,22 @@ msgstr "" "기" msgid "Format of G-code thumbnails" -msgstr "G코드 미리보기 형식" +msgstr "Gcode 미리보기 형식" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" -"G코드 미리보기 포맷: 최고 품질은 PNG, 최소 크기는 JPG, 저메모리 펌웨어는 QOI" +"Gcode 미리보기 포맷: 최고 품질은 PNG, 최소 크기는 JPG, 저메모리 펌웨어는 QOI" msgid "Use relative E distances" msgstr "상대적 E 거리 사용" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "\"label_objects\" 옵션을 사용할 때는 상대 압출을 권장합니다. 일부 압출기는 " "이 옵션을 선택하지 않은 경우(절대 압출 모드) 더 잘 작동합니다. 와이프 타워는 " @@ -13718,14 +16453,11 @@ msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "클래식 벽 생성기는 돌출 폭이 일정한 벽을 생성하며 매우 얇은 영역에는 간격 채" "움이 사용됩니다. 아라크네 엔진은 압출 폭이 가변적인 벽을 생성합니다." -msgid "Classic" -msgstr "클래식" - msgid "Arachne" msgstr "아라크네" @@ -13735,7 +16467,7 @@ msgstr "벽 변환 길이" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "부품이 얇아짐에 따라 벽의 수가 변화하는 경우, 벽 구간을 분할하거나 결합하기 " "위해 일정한 공간이 할당됩니다. 이는 노즐 지름을 기준으로 한 백분율로 표현됩니" @@ -13751,13 +16483,8 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"출력물의 벽 두께를 한 번 두껍게 한 다음 다시 한 번 더 얇게 하는 것을 방지합니" -"다. 이 마진은 다음의 범위로 압출 너비를 확장합니다: [최소 벽 너비 - 마진, 2 " -"* 최소 벽 너비 + 마진]. 이 마진이 증가하면 변환 횟수가 줄어들어 압출 시작/중" -"지 횟수와 이동 시간이 줄어듭니다. 그러나, 큰 압출 너비 변동은 압출 과다 또는 " -"압출 과소 문제를 일으킬 수 있습니다. 노즐 직경을 기준으로 백분율로 표시됩니다" msgid "Wall transitioning threshold angle" msgstr "벽 변환 임계값" @@ -13767,7 +16494,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "벽의 짝수와 홀수 사이에 변환을 만드는 시기. 이 설정보다 큰 각도의 쐐기 모양" "은 변환되지 않으며 나머지 공간 채우기를 위해 중앙에 벽이 출력되지 않습니다. " @@ -13779,7 +16506,7 @@ msgstr "벽 분포 수" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "변환을 분산해야 하는 벽의 개수(중심에서 카운트)입니다. 값이 낮으면 외벽의 너" "비가 변경되지 않습니다" @@ -13789,13 +16516,10 @@ msgstr "최소 형상 크기" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"얇은 형상의 최소 두께. 이 값보다 얇은 모델 형상은 출력되지 않으며, 최소 형상 " -"크기보다 두꺼운 형상은 최소 벽 너비로 확대됩니다. 노즐 직경에 대한 백분율로 " -"표시됩니다" msgid "Minimum wall length" msgstr "최소 벽 길이" @@ -13805,9 +16529,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "짧고 닫히지 않은 벽이 출력되는 것을 방지하려면 이 값을 조정하십시오. 이로 인" @@ -13838,7 +16562,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "모델의 얇은 형상(최소 형상 크기에 따름)을 대체할 벽의 너비입니다. 최소 벽 너" "비가 형상의 두께보다 얇은 경우 벽은 형상 자체만큼 두꺼워집니다. 노즐 직경에 " @@ -13848,9 +16572,9 @@ msgid "Detect narrow internal solid infill" msgstr "좁은 꽉찬 내부 채우기 감지" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "이 옵션은 좁은 꽉찬 내부 채우기 영역을 자동으로 감지합니다. 활성화하면 출력 " "속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 기본적으" @@ -13868,27 +16592,148 @@ msgstr "너무 넓은 선 너비 " msgid " not in range " msgstr " 범위를 벗어남 " +msgid "Export 3MF" +msgstr "3MF 내보내기" + +msgid "Export project as 3MF." +msgstr "프로젝트를 3MF로 내보내기." + +msgid "Export slicing data" +msgstr "슬라이싱 데이터 내보내기" + +msgid "Export slicing data to a folder." +msgstr "슬라이싱 데이터 폴더로 내보내기." + +msgid "Load slicing data" +msgstr "슬라이싱 데이터 로드" + +msgid "Load cached slicing data from directory." +msgstr "디렉토리에 캐시된 슬라이싱 데이터 로드" + +msgid "Export STL" +msgstr "STL 내보내기" + +msgid "Export the objects as single STL." +msgstr "객체를 단일 STL로 내보냅니다." + +msgid "Export multiple STLs" +msgstr "여러 STL을 내보내기" + +msgid "Export the objects as multiple STLs to directory." +msgstr "객체를 여러 STL로 경로에 내보내기" + +msgid "Slice" +msgstr "슬라이스" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "플레이트 슬라이스: 0-모든 플레이트, i-플레이트 i, 기타-잘못됨" + +msgid "Show command help." +msgstr "명령 도움말을 표시합니다." + +msgid "UpToDate" +msgstr "최신 정보" + +msgid "Update the config values of 3MF to latest." +msgstr "3mf의 구성 값을 최신으로 업데이트합니다." + +msgid "downward machines check" +msgstr "하향 머신 점검" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "현재 머신이 목록에 있는 머신과 하위 호환되는지 확인합니다." + +msgid "Load default filaments" +msgstr "기본 필라멘트 로드" + +msgid "Load first filament as default for those not loaded." +msgstr "로드되지 않은 경우 기본값으로 첫 번째 필라멘트 로드" + msgid "Minimum save" msgstr "최소 크기로 저장" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "최소 크기로 3mf를 내보냅니다." +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "슬라이싱을 위한 플레이트당 최대 삼각형 개수." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "플레이트당 최대 슬라이싱 시간(초)" + msgid "No check" msgstr "확인 안 함" -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "G코드 경로 충돌 검사와 같은 유효성 검사를 실행하지 마십시오." +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "Gcode 경로 충돌 검사와 같은 유효성 검사를 실행하지 마십시오." + +msgid "Normative check" +msgstr "표준 검사" + +msgid "Check the normative items." +msgstr "표준 항목을 확인합니다." + +msgid "Output Model Info" +msgstr "모델 정보 출력" + +msgid "Output the model's information." +msgstr "모델 정보를 출력합니다." + +msgid "Export Settings" +msgstr "설정 내보내기" + +msgid "Export settings to a file." +msgstr "설정을 파일로 내보내기." + +msgid "Send progress to pipe" +msgstr "진행 상황을 파이프로 보내기" + +msgid "Send progress to pipe." +msgstr "진행 상황을 파이프로 보내기." + +msgid "Arrange Options" +msgstr "정렬 옵션" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "정렬 옵션: 0-사용 안 함, 1-사용, 기타-자동" + +msgid "Repetition count" +msgstr "반복 횟수" + +msgid "Repetition count of the whole model." +msgstr "전체 모델의 반복 횟수" msgid "Ensure on bed" msgstr "베드에서 확인" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" -"개체의 일부가 베드 아래에 있을 때 베드 위로 개체를 들어올립니다. 기본적으로 " +"객체의 일부가 베드 아래에 있을 때 베드 위로 객체를 들어올립니다. 기본적으로 " "비활성화됩니다" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"제공된 모델을 플레이트에 배열하고 단일 모델로 병합하여 작업을 한 번 수행합니" +"다." + +msgid "Convert Unit" +msgstr "단위 변환" + +msgid "Convert the units of model." +msgstr "모델의 단위를 변환" + msgid "Orient Options" msgstr "방향 최적화 옵션" @@ -13898,12 +16743,84 @@ msgstr "방향 최적화 옵션: 0-비활성화, 1-활성화, 기타-자동" msgid "Rotation angle around the Z axis in degrees." msgstr "Z축을 중심으로 한 회전 각도입니다." +msgid "Rotate around X" +msgstr "X를 중심으로 회전" + +msgid "Rotation angle around the X axis in degrees." +msgstr "X축을 중심으로 한 회전 각도입니다." + msgid "Rotate around Y" msgstr "Y를 중심으로 회전" msgid "Rotation angle around the Y axis in degrees." msgstr "Y축을 중심으로 한 회전 각도입니다." +msgid "Scale the model by a float factor." +msgstr "부동 소수점 계수로 모델 크기 조정" + +msgid "Load General Settings" +msgstr "일반 설정 로드" + +msgid "Load process/machine settings from the specified file." +msgstr "지정된 파일에서 프로세스/장치 설정 로드" + +msgid "Load Filament Settings" +msgstr "필라멘트 설정 로드" + +msgid "Load filament settings from the specified file list." +msgstr "지정된 파일 목록에서 필라멘트 설정 불러오기" + +msgid "Skip Objects" +msgstr "객체 건너뛰기" + +msgid "Skip some objects in this print." +msgstr "이 출력에서 일부 객체를 건너뜁니다" + +msgid "Clone Objects" +msgstr "객체 복제" + +msgid "Clone objects in the load list." +msgstr "로드 목록에서 객체 복제" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"uptodate를 사용할 때 지정된 파일에서 최신 프로세스/프린터 설정을 로드합니다" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"최신 필라멘트 설정을 사용할 때 지정된 파일에서 최신 필라멘트 설정을 로드합니" +"다." + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"활성화된 경우 현재 컴퓨터가 목록에 있는 컴퓨터와 하위 호환되는지 확인합니다." + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "머신 설정 목록에서 아래쪽을 확인해야 합니다" + +msgid "Load assemble list" +msgstr "조립 목록 로드" + +msgid "Load assemble object list from config file." +msgstr "구성 파일에서 조립 객체 목록 로드" + msgid "Data directory" msgstr "데이터 디렉토리" @@ -13915,41 +16832,132 @@ msgstr "" "지정된 디렉토리에 설정을 로드하고 저장합니다. 이 기능은 서로 다른 사전설정을 " "유지하거나 네트워크 스토리지의 구성을 포함하는 데 유용합니다." -msgid "Load custom gcode" -msgstr "사용자 정의 G코드 불러오기" +msgid "Output directory" +msgstr "출력 디렉토리" -msgid "Load custom gcode from json" -msgstr "사용자 정의 G코드를 json에서 불러오기" +msgid "Output directory for the exported files." +msgstr "내보내기 파일의 출력 디렉토리입니다." -msgid "Current z-hop" +msgid "Debug level" +msgstr "디버그 수준" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"디버그 로깅 수준을 설정합니다. 0:치명적, 1:오류, 2:경고, 3:정보, 4:디버그, 5:" +"추적\n" + +msgid "Enable timelapse for print" +msgstr "출력에 타임랩스 활성화" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "활성화하면 타임랩스를 사용하여 이 슬라이싱을 고려합니다" + +#, fuzzy +msgid "Load custom G-code" +msgstr "사용자 정의 Gcode 불러오기" + +msgid "Load custom G-code from json." +msgstr "사용자 정의 Gcode를 json에서 불러오기." + +msgid "Load filament IDs" +msgstr "필라멘트 ID 불러오기" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "한 플레이트에서 여러 색상 허용" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "활성화하면 하나의 플레이트에 여러 색상을 허용합니다" + +msgid "Allow rotation when arranging" +msgstr "정렬할 때 회전 허용" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "활성화하면 객체를 배치할 때 배열이 회전을 허용합니다" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "정렬 시 돌출 보정 영역을 피하십시오." + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "활성화하면 객체를 배치할 때 돌출 보정 영역을 피합니다" + +#, fuzzy +msgid "Skip modified G-code in 3MF" +msgstr "3mf에서 수정된 Gcode 건너뛰기" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "프린터 또는 필라멘트 사전 설정에서 3mf의 수정된 Gcode 건너뛰기" + +msgid "MakerLab name" +msgstr "메이커 랩 이름" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "이 3mf를 생성하는 메이커랩 이름" + +msgid "MakerLab version" +msgstr "메이커 랩 버전" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "이 3mf를 생성하기 위한 메이커랩 버전" + +msgid "Metadata name list" +msgstr "메타데이터 이름 목록" + +#, fuzzy +msgid "Metadata name list added into 3MF." +msgstr "3mf에 메타데이터 이름 목록 추가됨" + +msgid "Metadata value list" +msgstr "메타데이터 값 목록" + +msgid "Metadata value list added into 3MF." +msgstr "메타데이터 값 목록이 3MF에 추가됨" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced." +msgstr "최신 버전의 3mf를 슬라이스하도록 허용" + +msgid "Current Z-hop" msgstr "현재 Z올리기" -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "사용자 정의 G코드 블록의 시작 부분에 있는 Z올리기를 포함합니다." +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "사용자 정의 Gcode 블록의 시작 부분에 있는 Z올리기를 포함합니다." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" -"사용자 정의 G코드 블록 시작 부분의 압출기 위치입니다. 사용자 정의 G코드가 다" +"사용자 정의 Gcode 블록 시작 부분의 압출기 위치입니다. 사용자 정의 Gcode가 다" "른 곳으로 이동하는 경우 PrusaSlicer가 제어권을 다시 얻을 때 이동 위치를 알 " "수 있도록 이 변수에 기록해야 합니다." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -"사용자 정의 G코드 블록 시작 부분의 후퇴 상태입니다. 사용자 정의 G코드가 압출" +"사용자 정의 Gcode 블록 시작 부분의 후퇴 상태입니다. 사용자 정의 Gcode가 압출" "기 축을 이동하는 경우 PrusaSlicer가 다시 제어권을 얻었을 때 올바르게 후퇴할 " "수 있도록 이 변수에 기록해야 합니다." -msgid "Extra deretraction" -msgstr "추가 철회" +msgid "Extra de-retraction" +msgstr "추가 후퇴" -msgid "Currently planned extra extruder priming after deretraction." -msgstr "현재 철회 후 추가 압출기 프라이밍이 계획되어 있습니다." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "현재 후퇴 후 추가 압출기 프라이밍이 계획되어 있습니다." msgid "Absolute E position" msgstr "절대 E 위치" @@ -13966,12 +16974,12 @@ msgid "Zero-based index of currently used extruder." msgstr "현재 사용되는 압출기의 0 기반 인덱스입니다." msgid "Current object index" -msgstr "현재 개체 인덱스" +msgstr "현재 객체 인덱스" msgid "" "Specific for sequential printing. Zero-based index of currently printed " "object." -msgstr "순차 출력에만 해당됩니다. 현재 출력된 개체의 0 기반 인덱스입니다." +msgstr "순차 출력에만 해당됩니다. 현재 출력된 객체의 0 기반 인덱스입니다." msgid "Has wipe tower" msgstr "와이프 타워 있음" @@ -14000,14 +17008,15 @@ msgstr "" msgid "Is extruder used?" msgstr "압출기를 사용하나요?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "특정 압출기가 출력에 사용되는지 여부를 나타내는 값 입니다." msgid "Has single extruder MM priming" msgstr "단일 압출기 MM 프라이밍 있음" msgid "Are the extra multi-material priming regions used in this print?" -msgstr "이 인쇄물에 추가 다중 재료 프라이밍 영역이 사용됩니까?" +msgstr "이 출력물에 추가 다중 재료 프라이밍 영역이 사용됩니까?" msgid "Volume per extruder" msgstr "압출기당 부피" @@ -14015,10 +17024,10 @@ msgstr "압출기당 부피" msgid "Total filament volume extruded per extruder during the entire print." msgstr "전체 프린트 동안 압출기당 압출된 총 필라멘트 양입니다." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "총 툴 체인지" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "출력 중 도구 교환 횟수." msgid "Total volume" @@ -14053,42 +17062,44 @@ msgid "Number of layers in the entire print." msgstr "전체 출력의 레이어 수입니다." msgid "Number of objects" -msgstr "개체 수" +msgstr "객체 수" msgid "Total number of objects in the print." -msgstr "출력물의 총 개체 수입니다." +msgstr "출력물의 총 객체 수입니다." msgid "Number of instances" msgstr "인스턴스 수" msgid "Total number of object instances in the print, summed over all objects." -msgstr "모든 개체에 대해 합산된 출력물의 총 개체 인스턴스 수입니다." +msgstr "모든 객체에 대해 합산된 출력물의 총 객체 인스턴스 수입니다." msgid "Scale per object" -msgstr "개체당 크기 조정" +msgstr "객체당 크기 조정" msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" -"개별 개체에 어떤 크기 조정이 적용되었는지에 대한 정보가 포함된 문자열을 포함" -"합니다. 개체의 인덱싱은 0부터 시작합니다(첫 번째 개체의 인덱스는 0입니다).\n" -"예: 'x:100% y:50% z:100'." +"개별 객체에 어떤 크기 조정이 적용되었는지에 대한 정보가 포함된 문자열을 포함" +"합니다. 객체의 인덱싱은 0부터 시작합니다(첫 번째 객체의 인덱스는 0입니다).\n" +"예: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "확장자가 없는 입력 파일 이름" msgid "Source filename of the first object, without extension." -msgstr "확장자가 없는 첫 번째 개체의 소스 파일 이름입니다." +msgstr "확장자가 없는 첫 번째 객체의 소스 파일 이름입니다." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "벡터에는 점의 x 및 y 좌표라는 두 가지 요소가 있습니다. 값(mm)" +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "벡터에는 경계 상자의 x 및 y 차원이라는 두 가지 요소가 있습니다. 값(mm)" @@ -14135,6 +17146,9 @@ msgstr "시간" msgid "Minute" msgstr "분" +msgid "Second" +msgstr "초" + msgid "Print preset name" msgstr "사전 설정 이름 출력" @@ -14177,7 +17191,7 @@ msgstr "레이어 번호" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "현재 레이어의 인덱스입니다. 1 기반(즉, 첫 번째 레이어가 1번입니다)." -msgid "Layer z" +msgid "Layer Z" msgstr "레이어 z" msgid "" @@ -14185,7 +17199,7 @@ msgid "" "layer." msgstr "레이어 상단까지 측정된 출력 베드 위의 현재 레이어 높이입니다." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "최대 레이어 z" msgid "Height of the last layer above the print bed." @@ -14210,13 +17224,10 @@ msgid "Generating infill toolpath" msgstr "채우기 툴 경로 생성 중" msgid "Detect overhangs for auto-lift" -msgstr "Z 올리기를 위한 돌출부 감지" - -msgid "Generating support" -msgstr "지지대 생성 중" +msgstr "Z 올리기를 위한 오버행 감지" msgid "Checking support necessity" -msgstr "지지대 필요성 확인" +msgstr "서포트 필요성 확인" msgid "floating regions" msgstr "떠있는 영역" @@ -14225,21 +17236,24 @@ msgid "floating cantilever" msgstr "떠있는 외팔보" msgid "large overhangs" -msgstr "큰 돌출부" +msgstr "큰 오버행" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"개체 %s에 %s이(가) 있는 것 같습니다. 물체의 방향을 바꾸거나 지지대 생성을 활" -"성화하세요." +"객체 %s에 %s가 있는 것 같습니다. 물체의 방향을 바꾸거나 서포트 생성을 활성화" +"하세요." + +msgid "Generating support" +msgstr "서포트 생성 중" msgid "Optimizing toolpath" msgstr "툴 경로 최적화" msgid "Slicing mesh" -msgstr "슬라이싱 메쉬" +msgstr "슬라이싱 메시" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " @@ -14251,41 +17265,31 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"개체의 XY 크기 보정은 색으로 칠해져 있기 때문에 사용되지 않습니다.\n" +"객체의 XY 크기 보정은 색으로 칠해져 있기 때문에 사용되지 않습니다.\n" "XY 크기 보정은 컬러 페인팅과 결합할 수 없습니다." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "지지대: 레이어 %d에서 툴 경로 생성" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "지지대: 오버행 감지" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" -msgstr "지지대: 접점 생성" +msgstr "서포트: 접점 생성" -msgid "Support: propagate branches" -msgstr "지지대: 가지 증식" +msgid "Loading of a model file failed." +msgstr "모델 파일 로드에 실패했습니다." -msgid "Support: draw polygons" -msgstr "지지대: 폴리곤 그리기" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "지지대: 툴 경로 생성" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "지지대: 레이어 %d에서 폴리곤 생성" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "지지대: 레이어 %d의 구멍 수정" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "지지대: 레이어 %d에서 가지 증식" +msgid "The supplied file couldn't be read because it's empty" +msgstr "제공된 파일이 비어 있어 읽을 수 없습니다" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14293,19 +17297,10 @@ msgstr "" "알 수 없는 파일 형식: 입력 파일의 확장자는 .stl, .obj 또는 .amf(.xml)여야 합" "니다." -msgid "Loading of a model file failed." -msgstr "모델 파일 로드에 실패했습니다." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "제공된 파일이 비어 있어 읽을 수 없습니다" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "알 수 없는 파일 형식: 입력 파일의 확장자는.3mf 또는.zip.amf여야 합니다." -msgid "Canceled" -msgstr "취소됨" - msgid "load_obj: failed to parse" msgstr "load_obj: 구문 분석에 실패" @@ -14325,10 +17320,10 @@ msgid "This OBJ file couldn't be read because it's empty." msgstr "이 OBJ 파일은 비어 있어서 읽을 수 없습니다." msgid "Flow Rate Calibration" -msgstr "유량 교정" +msgstr "압출량 교정" msgid "Max Volumetric Speed Calibration" -msgstr "최대 체적 속도 교정" +msgstr "최대 압출 속도 교정" msgid "Manage Result" msgstr "결과 관리" @@ -14362,7 +17357,7 @@ msgstr "교정 결과를 어떻게 사용하나요?" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "재료 편집에서 동적 유량 교정 계수를 변경할 수 있습니다" +msgstr "재료 편집에서 동적 압출량 교정 계수를 변경할 수 있습니다" msgid "" "The current firmware version of the printer does not support calibration.\n" @@ -14381,13 +17376,13 @@ msgid "Extra info" msgstr "추가 정보" msgid "Flow Dynamics" -msgstr "동적 유량" +msgstr "동적 압출량" msgid "Flow Rate" -msgstr "유량" +msgstr "압출량" msgid "Max Volumetric Speed" -msgstr "최대 체적 속도" +msgstr "최대 압출 속도" #, c-format, boost-format msgid "" @@ -14395,7 +17390,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "유효한 값을 입력하세요:\n" "시작 값: >= %.1f\n" @@ -14407,8 +17402,8 @@ msgid "The name cannot be empty." msgstr "이름은 비워둘 수 없습니다." #, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "선택한 사전 설정: %s을(를) 찾을 수 없습니다." +msgid "The selected preset: %s was not found." +msgstr "선택한 사전 설정: %s을 찾을 수 없습니다." msgid "The name cannot be the same as the system preset name." msgstr "이름은 시스템 사전 설정 이름과 동일할 수 없습니다." @@ -14419,6 +17414,14 @@ msgstr "이름이 기존의 다른 사전 설정 이름과 동일합니다" msgid "create new preset failed." msgstr "새 사전 설정을 생성하지 못했습니다." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "현재 교정을 취소하고 홈 페이지로 돌아가시겠습니까?" @@ -14439,7 +17442,7 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "이 기계 유형은 노즐당 16개의 기록 결과만 보유할 수 있습니다. 기존 기록 결과" @@ -14447,14 +17450,11 @@ msgstr "" "교정 기록 결과를 생성할 수는 없습니다.\n" "그래도 교정을 계속하시겠습니까?" -msgid "Connecting to printer..." -msgstr "프린터에 연결하는 중..." - -msgid "The failed test result has been dropped." -msgstr "실패한 테스트 결과가 삭제되었습니다." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "동적 유량 교정 결과가 프린터에 저장되었습니다" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -14465,6 +17465,13 @@ msgstr "" "동일한 이름을 가진 기록 교정 결과가 이미 있습니다: %s. 동일한 이름의 결과 중 " "하나만 저장됩니다. 과거 결과를 재정의하시겠습니까?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14473,20 +17480,29 @@ msgstr "" "이 기계 유형은 노즐당 %d개의 기록 결과만 보유할 수 있습니다. 이 결과는 저장되" "지 않습니다." +msgid "Connecting to printer..." +msgstr "프린터에 연결하는 중..." + +msgid "The failed test result has been dropped." +msgstr "실패한 테스트 결과가 삭제되었습니다." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "동적 압출량 교정 결과가 프린터에 저장되었습니다" + msgid "Internal Error" msgstr "내부 오류" msgid "Please select at least one filament for calibration" msgstr "교정을 위해 하나 이상의 필라멘트를 선택하세요" -msgid "Flow rate calibration result has been saved to preset" -msgstr "유량 교정 결과가 사전 설정에 저장되었습니다" +msgid "Flow rate calibration result has been saved to preset." +msgstr "압출량 교정 결과가 사전 설정에 저장되었습니다" -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "최대 체적 속도 교정 결과가 사전 설정에 저장되었습니다" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "최대 압출 속도 교정 결과가 사전 설정에 저장되었습니다" msgid "When do you need Flow Dynamics Calibration" -msgstr "동적 유량 교정이 필요한 경우" +msgstr "동적 압출량 교정이 필요한 경우" msgid "" "We now have added the auto-calibration for different filaments, which is " @@ -14494,17 +17510,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"이제 다양한 필라멘트에 대한 자동 교정 기능이 추가되었습니다. 이 기능은 완전" -"히 자동화되었으며 결과는 나중에 사용할 수 있도록 프린터에 저장됩니다. 다음과 " -"같은 제한된 경우에만 보정을 수행해야 합니다.\n" -"1. 다른 브랜드/모델의 새로운 필라멘트를 도입하거나 필라멘트가 습기에 노출된 " -"경우;\n" -"2. 노즐이 낡았거나 새것으로 교체한 경우\n" -"3. 필라멘트 설정에서 최대 체적 속도나 출력 온도가 변경된 경우." msgid "About this calibration" msgstr "교정 정보" @@ -14528,13 +17537,13 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" -"우리 위키에서 동적 유량 교정에 대한 자세한 내용을 찾아보세요.\n" +"우리 위키에서 동적 압출량 교정에 대한 자세한 내용을 찾아보세요.\n" "\n" -"일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 유량 교정\" 옵" -"션을 선택한 상태에서 단일 색상/재료 출력을 시작하면 프린터는 이전 방식을 따르" -"며 출력 전에 필라멘트를 교정합니다. 다중 색상/재료 출력을 시작하면 프린터는 " -"모든 필라멘트 전환 중에 필라멘트에 대한 기본 보상 매개변수를 사용하므로 대부" -"분의 경우 좋은 결과를 얻을 수 있습니다.\n" +"일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 압출량 교정\" " +"옵션을 선택한 상태에서 단일 색상/재료 출력을 시작하면 프린터는 이전 방식을 따" +"르며 출력 전에 필라멘트를 교정합니다. 다중 색상/재료 출력을 시작하면 프린터" +"는 모든 필라멘트 전환 중에 필라멘트에 대한 기본 보상 매개변수를 사용하므로 대" +"부분의 경우 좋은 결과를 얻을 수 있습니다.\n" "\n" "교정 결과를 신뢰할 수 없게 만드는 몇 가지 경우가 있습니다. 텍스처 플레이트를 " "사용하여 보정을 수행합니다. 빌드 플레이트의 접착력이 좋지 않습니다. (빌드 플" @@ -14546,22 +17555,22 @@ msgstr "" "인을 계속 조사하고 있습니다." msgid "When to use Flow Rate Calibration" -msgstr "유량 교정을 사용해야 하는 경우" +msgstr "압출량 교정을 사용해야 하는 경우" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"동적 유량 교정을 사용한 후에도 다음과 같은 압출 문제가 여전히 발생할 수 있습" -"니다.\n" -"1. 과다 압출: 출력된 개체에 재료가 너무 많아 얼룩이나 잡티가 형성되거나 레이" +"동적 압출량 교정을 사용한 후에도 다음과 같은 압출 문제가 여전히 발생할 수 있" +"습니다.\n" +"1. 과다 압출: 출력된 객체에 재료가 너무 많아 얼룩이나 잡티가 형성되거나 레이" "어가 예상보다 두껍고 균일하지 않은 것처럼 보입니다.\n" "2. 과소 압출: 레이어가 매우 얇거나 충전 강도가 약하거나 천천히 출력할 때에도 " "모델 상단 레이어에 틈이 있습니다.\n" @@ -14574,8 +17583,8 @@ msgid "" "PLA used in RC planes. These materials expand greatly when heated, and " "calibration provides a useful reference flow rate." msgstr "" -"또한 RC 비행기에 사용되는 LW-PLA와 같은 발포 재료에는 유량 교정이 중요합니" -"다. 이러한 물질은 가열되면 크게 팽창하며 교정은 유용한 기준 유량을 제공합니" +"또한 RC 비행기에 사용되는 LW-PLA와 같은 발포 재료에는 압출량 교정이 중요합니" +"다. 이러한 물질은 가열되면 크게 팽창하며 교정은 유용한 기준 압출량을 제공합니" "다." msgid "" @@ -14586,11 +17595,11 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"유량 교정은 예상되는 압출량과 실제 압출량의 비율을 측정합니다. 기본 설정은 사" -"전 보정되고 미세 조정된 뱀부랩 프린터 및 공식 필라멘트에서 잘 작동합니다. 일" -"반 필라멘트의 경우 일반적으로 다른 교정을 수행한 후에도 나열된 결함이 표시되" -"지 않는 한 유량 교정을 수행할 필요가 없습니다. 자세한 내용은 위키를 확인하시" -"기 바랍니다." +"압출량 교정은 예상되는 압출량과 실제 압출량의 비율을 측정합니다. 기본 설정은 " +"사전 보정되고 미세 조정된 뱀부랩 프린터 및 공식 필라멘트에서 잘 작동합니다. " +"일반 필라멘트의 경우 일반적으로 다른 교정을 수행한 후에도 나열된 결함이 표시" +"되지 않는 한 압출량 교정을 수행할 필요가 없습니다. 자세한 내용은 위키를 확인" +"하시기 바랍니다." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -14610,28 +17619,28 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"자동 유량 교정은 뱀부랩의 마이크로 라이다 기술을 활용하여 교정 패턴을 직접 측" -"정합니다. 그러나 특정 유형의 재료를 사용하면 이 방법의 효율성과 정확성이 저하" -"될 수 있다는 점에 유의하시기 바랍니다. 특히, 투명 또는 반투명, 반짝이는 입자 " -"또는 고반사 마감 처리된 필라멘트는 이 교정에 적합하지 않을 수 있으며 바람직하" -"지 않은 결과를 생성할 수 있습니다.\n" +"자동 압출량 교정은 뱀부랩의 마이크로 라이다 기술을 활용하여 교정 패턴을 직접 " +"측정합니다. 그러나 특정 유형의 재료를 사용하면 이 방법의 효율성과 정확성이 저" +"하될 수 있다는 점에 유의하시기 바랍니다. 특히, 투명 또는 반투명, 반짝이는 입" +"자 또는 고반사 마감 처리된 필라멘트는 이 교정에 적합하지 않을 수 있으며 바람" +"직하지 않은 결과를 생성할 수 있습니다.\n" "\n" "교정 결과는 각 교정 또는 필라멘트마다 다를 수 있습니다. 우리는 시간이 지남에 " "따라 펌웨어 업데이트를 통해 이 교정의 정확성과 호환성을 계속 개선하고 있습니" "다.\n" "\n" -"주의: 유량 교정은 목적과 의미를 완전히 이해하는 사람만이 시도할 수 있는 고급 " -"프로세스입니다. 잘못 사용하면 수준 이하의 출력이나 프린터 손상이 발생할 수 있" -"습니다. 반드시 절차를 주의 깊게 읽고 이해하신 후 진행하시기 바랍니다." +"주의: 압출량 교정은 목적과 의미를 완전히 이해하는 사람만이 시도할 수 있는 고" +"급 프로세스입니다. 잘못 사용하면 수준 이하의 출력이나 프린터 손상이 발생할 " +"수 있습니다. 반드시 절차를 주의 깊게 읽고 이해하신 후 진행하시기 바랍니다." msgid "When you need Max Volumetric Speed Calibration" -msgstr "최대 체적 속도 교정이 필요한 경우" +msgstr "최대 압출 속도 교정이 필요한 경우" msgid "Over-extrusion or under extrusion" msgstr "과다 압출 또는 과소 압출" msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "다음을 사용하여 출력할 때 최대 체적 속도 교정을 권장합니다:" +msgstr "다음을 사용하여 출력할 때 최대 압출 속도 교정을 권장합니다:" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "열 수축/팽창이 심한 재료, 다음과 같은..." @@ -14640,7 +17649,7 @@ msgid "materials with inaccurate filament diameter" msgstr "필라멘트 직경이 부정확한 재료" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "최고의 동적 유량 교정 계수를 찾았습니다" +msgstr "최고의 동적 압출량 교정 계수를 찾았습니다" msgid "" "Part of the calibration failed! You may clean the plate and retry. The " @@ -14654,27 +17663,17 @@ msgid "" "the Name" msgstr "*이름에 브랜드, 재질, 유형, 습도까지 추가하는 것이 좋습니다" -msgid "Failed" -msgstr "실패" - msgid "Please enter the name you want to save to printer." msgstr "프린터에 저장할 이름을 입력하세요." msgid "The name cannot exceed 40 characters." msgstr "이름은 40자를 초과할 수 없습니다." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"단 하나의 결과만을 같은 이름으로 저장할 수 있습니다. 다른 결과들을 덮어쓸까" -"요?" - msgid "Please find the best line on your plate" msgstr "당신의 플레이트에서 가장 좋은 선을 찾아보세요" msgid "Please find the corner with perfect degree of extrusion" -msgstr "사출 품질이 제일 좋은 모서리를 찾아보세요" +msgstr "완벽한 돌출 정도를 가진 코너를 찾아주세요." msgid "Input Value" msgstr "입력값" @@ -14682,20 +17681,17 @@ msgstr "입력값" msgid "Save to Filament Preset" msgstr "필라멘트 사전 설정에 저장" -msgid "Preset" -msgstr "사전 설정" - msgid "Record Factor" msgstr "계수 기록" msgid "We found the best flow ratio for you" -msgstr "당신에게 가장 적합한 유량 비율을 찾았습니다" +msgstr "당신에게 가장 적합한 압출량 비율을 찾았습니다" msgid "Flow Ratio" -msgstr "유량 비율" +msgstr "압출량 비율" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "유효한 값을 입력하세요(0.0 < 유량비율 < 2.0)" +msgstr "유효한 값을 입력하세요(0.0 < 압출량비율 < 2.0)" msgid "Please enter the name of the preset you want to save." msgstr "저장하고 싶은 사전 설정의 이름을 입력해주세요." @@ -14707,7 +17703,7 @@ msgid "Calibration2" msgstr "교정2" msgid "Please find the best object on your plate" -msgstr "당신의 플레이트에서 가장 좋은 개체를 찾아보세요" +msgstr "당신의 플레이트에서 가장 좋은 객체를 찾아보세요" msgid "Fill in the value above the block with smoothest top surface" msgstr "가장 매끄러운 윗면을 가진 블록 위의 값을 입력하세요" @@ -14717,16 +17713,13 @@ msgstr "교정2 건너뛰기" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "유량 비율 : %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "상단 표면이 가장 매끄러운 블록을 선택하세요" +msgstr "압출량 비율 : %s " msgid "Please choose a block with smoothest top surface." msgstr "상단 표면이 가장 매끄러운 블록을 선택하세요." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "유효한 값을 입력하세요(0 <= 최대 체적 속도 <= 60)" +msgstr "유효한 값을 입력하세요(0 <= 최대 압출 속도 <= 60)" msgid "Calibration Type" msgstr "교정 유형" @@ -14735,7 +17728,7 @@ msgid "Complete Calibration" msgstr "교정 완료" msgid "Fine Calibration based on flow ratio" -msgstr "유량비율에 따른 미세 교정" +msgstr "압출량비율에 따른 미세 교정" msgid "Title" msgstr "제목" @@ -14750,22 +17743,37 @@ msgstr "" msgid "Printing Parameters" msgstr "출력 매개변수" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "플레이트 타입" msgid "filament position" msgstr "필라멘트 위치" -msgid "External Spool" -msgstr "외부 스풀" - msgid "Filament For Calibration" msgstr "교정할 필라멘트" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "교정 재료에 대한 팁:\n" "- 동일한 히트베드 온도를 공유할 수 있는 소재\n" @@ -14782,11 +17790,25 @@ msgid "%s is not compatible with %s" msgstr "%s은(는) %s과(와) 호환되지 않습니다" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "TPU는 동적 유량 자동 교정에서 지원되지 않습니다." +msgstr "TPU는 동적 압출량 자동 교정에서 지원되지 않습니다." + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" msgid "Connecting to printer" msgstr "프린터에 연결 중" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "K 값에서" @@ -14800,13 +17822,16 @@ msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "노즐 직경이 프린터 설정에서 동기화되었습니다" msgid "From Volumetric Speed" -msgstr "체적 속도에서" +msgstr "압출 속도에서" msgid "To Volumetric Speed" -msgstr "체적 속도로" +msgstr "압출 속도로" + +msgid "Are you sure you want to cancel this print?" +msgstr "이 출력을 취소하겠습니까?" msgid "Flow Dynamics Calibration Result" -msgstr "동적 유량 교정 결과" +msgstr "동적 압출량 교정 결과" msgid "New" msgstr "새로운" @@ -14818,7 +17843,7 @@ msgid "Success to get history result" msgstr "기록 결과 가져오기 성공" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "과거 동적 유량 교정 기록 새로 고침" +msgstr "과거 동적 압출량 교정 기록 새로 고침" msgid "Action" msgstr "실행" @@ -14828,10 +17853,17 @@ msgid "This machine type can only hold %d history results per nozzle." msgstr "이 기계 유형은 노즐당 %d개의 기록 결과만 보유할 수 있습니다." msgid "Edit Flow Dynamics Calibration" -msgstr "동적 유량 교정 편집" +msgstr "동적 압출량 교정 편집" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "새로운 유량 동적 교정" +msgstr "새로운 압출량 동적 교정" msgid "Ok" msgstr "확인" @@ -14839,6 +17871,12 @@ msgstr "확인" msgid "The filament must be selected." msgstr "필라멘트를 선택해야 합니다." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "네트워크 검색" @@ -14868,21 +17906,18 @@ msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" -"호스트 이름 %1%(으)로 확인되는 IP 주소가 여러 개 있습니다.\n" +"호스트 이름 %1%으로 확인되는 IP 주소가 여러 개 있습니다.\n" "사용 할 IP를 선택해 주세요." msgid "PA Calibration" msgstr "PA 교정" -msgid "DDE" -msgstr "다이렉트" - -msgid "Bowden" -msgstr "보우덴" - msgid "Extruder type" msgstr "압출기 타입" +msgid "DDE" +msgstr "다이렉트" + msgid "PA Tower" msgstr "PA 타워" @@ -14901,14 +17936,32 @@ msgstr "종료 PA: " msgid "PA step: " msgstr "PA 단계: " +msgid "Accelerations: " +msgstr "가속: " + +msgid "Speeds: " +msgstr "속도: " + msgid "Print numbers" msgstr "출력 수" +msgid "Comma-separated list of printing accelerations" +msgstr "쉼표로 구분된 출력 가속 목록" + +msgid "Comma-separated list of printing speeds" +msgstr "쉼표로 구분된 출력 속도 목록" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "유효한 값을 입력하세요:\n" "PA 시작: >= 0.0\n" @@ -14918,6 +17971,9 @@ msgstr "" msgid "Temperature calibration" msgstr "온도 교정" +msgid "Filament type" +msgstr "필라멘트 유형" + msgid "PLA" msgstr "PLA" @@ -14939,9 +17995,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "필라멘트 유형" - msgid "Start temp: " msgstr "시작 온도: " @@ -14951,34 +18004,33 @@ msgstr "종료 온도: " msgid "Temp step: " msgstr "온도 단계: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"유효한 값을 입력하세요:\n" -"시작 온도: <= 350\n" -"종료 온도: >= 170\n" -"시작온도 > 종료온도 + 5)" msgid "Max volumetric speed test" -msgstr "최대 체적 속도 테스트" +msgstr "최대 압출 속도 테스트" msgid "Start volumetric speed: " -msgstr "시작 체적 속도: " +msgstr "시작 압출 속도: " msgid "End volumetric speed: " -msgstr "종료 체적 속도: " +msgstr "종료 압출 속도: " -msgid "step: " -msgstr "단계: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "유효한 값을 입력하세요:\n" "시작 > 0\n" @@ -14994,11 +18046,14 @@ msgstr "시작 속도: " msgid "End speed: " msgstr "종료 속도: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "유효한 값을 입력하세요:\n" "시작 > 10\n" @@ -15011,11 +18066,132 @@ msgstr "후퇴 시작 길이: " msgid "End retraction length: " msgstr "후퇴 종료 길이: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" -msgstr "G코드를 프린터 호스트로 보내기" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" +msgstr "Gcode를 프린터 호스트로 보내기" msgid "Upload to Printer Host with the following filename:" msgstr "다음 파일 이름으로 프린터 호스트에 업로드:" @@ -15043,7 +18219,7 @@ msgid "ID" msgstr "아이디" msgid "Progress" -msgstr "진행률" +msgstr "진행 상황" msgid "Host" msgstr "호스트" @@ -15061,23 +18237,42 @@ msgstr "선택 취소" msgid "Show error message" msgstr "오류 메시지 표시" -msgid "Enqueued" +msgid "Queued" msgstr "대기 중" msgid "Uploading" msgstr "업로드 중" -msgid "Cancelling" +msgid "Canceling" msgstr "취소 중" msgid "Error uploading to print host" msgstr "출력 호스트에 업로드하는 중 오류가 발생했습니다" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"선택한 베드 유형이 파일과 일치하지 않습니다. 출력을 시작하기 전에 확인해 주세" +"요." + +msgid "Time-lapse" +msgstr "타임랩스" + +msgid "Heated Bed Leveling" +msgstr "히트 베드 레벨링" + +msgid "Textured Build Plate (Side A)" +msgstr "텍스처 빌드 플레이트(A면)" + +msgid "Smooth Build Plate (Side B)" +msgstr "매끄러운 빌드 플레이트(B면)" + msgid "Unable to perform boolean operation on selected parts" msgstr "선택한 부품에서 부울 연산을 수행할 수 없습니다" msgid "Mesh Boolean" -msgstr "메쉬 부울" +msgstr "메시 합집합/차집합/교집합" msgid "Union" msgstr "합집합" @@ -15110,7 +18305,7 @@ msgid "Part 2" msgstr "부품 2" msgid "Delete input" -msgstr "입력개체 삭제" +msgstr "입력객체 삭제" msgid "Network Test" msgstr "네트워크 테스트" @@ -15133,13 +18328,13 @@ msgstr "시스템 버전:" msgid "DNS Server:" msgstr "DNS 서버:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Snapmaker Orca 테스트(깃허브)" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Snapmaker Orca 테스트(깃허브):" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "테스트 Bing.com" msgid "Test bing.com:" @@ -15205,14 +18400,14 @@ msgstr "" "세요." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"뱀부\" 또는 \"일반적인\"은 맞춤형 필라멘트 공급업체로 사용할 수 없습니다." msgid "Filament type is not selected, please reselect type." msgstr "필라멘트 유형이 선택되지 않았습니다. 유형을 다시 선택하세요." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "필라멘트 시리얼이 입력되지 않았습니다. 시리얼을 입력해 주세요." msgid "" @@ -15227,7 +18422,7 @@ msgstr "" "사용자 정의 공급업체 또는 일련번호의 모든 입력은 공백입니다. 다시 입력해 주세" "요." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "공급업체는 숫자가 될 수 없습니다. 다시 입력하세요." msgid "" @@ -15236,7 +18431,7 @@ msgstr "아직 프린터나 사전 설정을 선택하지 않았습니다. 하 #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" @@ -15256,11 +18451,9 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" -"사전 설정의 이름을 \"선택한 공급업체 유형 직렬 @프린터\"로 변경합니다.\n" -"더 많은 프린터에 대한 사전 설정을 추가하려면 프린터 선택으로 이동하세요" msgid "Create Printer/Nozzle" msgstr "프린터/노즐 생성" @@ -15283,21 +18476,27 @@ msgstr "사전 설정 가져오기" msgid "Create Type" msgstr "유형 생성" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "모델을 찾을 수 없습니다. 공급업체를 다시 선택하세요." -msgid "Select Model" -msgstr "모델 선택" - msgid "Select Printer" msgstr "프린터 선택" +msgid "Select Model" +msgstr "모델 선택" + msgid "Input Custom Model" msgstr "커스텀 모델 입력" msgid "Can't find my printer model" msgstr "내 프린터 모델을 찾을 수 없습니다" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "직사각형" @@ -15307,15 +18506,9 @@ msgstr "출력 가능 공간" msgid "Hot Bed STL" msgstr "베드 STL" -msgid "Load stl" -msgstr "STL 불러오기" - msgid "Hot Bed SVG" msgstr "베드 SVG" -msgid "Load svg" -msgstr "SVG 불러오기" - msgid "Max Print Height" msgstr "최대 출력 높이" @@ -15326,16 +18519,16 @@ msgstr "파일이 %d MB를 초과합니다. 다시 가져오십시오." msgid "Exception in obtaining file size, please import again." msgstr "파일 크기를 가져오는 중 예외가 발생했습니다. 다시 가져오세요." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "사전 설정 경로를 찾을 수 없습니다. 공급업체를 다시 선택하세요." msgid "The printer model was not found, please reselect." msgstr "프린터 모델을 찾을 수 없습니다. 다시 선택하세요." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "노즐 직경이 마음에 들지 않으면 다시 선택하세요." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "프린터 사전 설정이 마음에 들지 않습니다. 다시 선택하세요." msgid "Printer Preset" @@ -15350,9 +18543,6 @@ msgstr "모두 선택 해제" msgid "Process Preset Template" msgstr "프로세스 사전 설정 템플릿" -msgid "Back Page 1" -msgstr "뒤 페이지 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -15367,9 +18557,6 @@ msgstr "" "첫 번째 페이지의 출력 가능 영역 섹션에 잘못된 입력을 입력했습니다. 작성 전 " "꼭 확인해주세요." -msgid "The custom printer or model is not inputed, place input." -msgstr "사용자 정의 프린터 또는 모델이 입력되지 않았습니다. 입력하세요." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15398,14 +18585,14 @@ msgstr "필라멘트 사전 설정 생성에 실패했습니다. 다음과 같 msgid "Create process presets failed. As follows:\n" msgstr "프로세스 사전 설정 생성에 실패했습니다. 다음과 같이:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "공급업체를 찾을 수 없습니다. 다시 선택하세요." msgid "Current vendor has no models, please reselect." msgstr "현재 공급업체에는 모델이 없습니다. 다시 선택하세요." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "공급업체 및 모델을 선택하지 않았거나 맞춤 공급업체 및 모델을 입력하지 않았습" @@ -15431,10 +18618,18 @@ msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "노즐을 교체할 프린터를 아직 선택하지 않으셨습니다. 선택해 주세요." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "프린터 생성 성공" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "필라멘트 생성 성공" msgid "Printer Created" @@ -15453,7 +18648,7 @@ msgid "" "them carefully." msgstr "" "필요한 경우 필라멘트 설정으로 이동하여 사전 설정을 편집하세요.\n" -"노즐 온도, 핫베드 온도 및 최대 체적 속도는 출력 품질에 큰 영향을 미칩니다. 신" +"노즐 온도, 핫베드 온도 및 최대 압출 속도는 출력 품질에 큰 영향을 미칩니다. 신" "중하게 설정해 주세요." msgid "" @@ -15461,7 +18656,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" @@ -15516,15 +18711,22 @@ msgstr "" "현재 디렉터리에 '%s' 폴더가 이미 존재합니다. 지우고 다시 작성하시겠습니까?\n" "그렇지 않은 경우 시간 접미사가 추가되며 생성 후 이름을 수정할 수 있습니다." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "프린터와 프린터에 속한 모든 필라멘트 및 프로세스 사전 설정.\n" "다른 사람과 공유할 수 있습니다." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "사용자의 필라멘트 사전 설정입니다.\n" @@ -15587,7 +18789,7 @@ msgstr "" "참고: 이 필라멘트 아래의 유일한 사전 설정이 삭제되면 대화 상자를 종료한 후 필" "라멘트가 삭제됩니다." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "다른 사전 설정에 상속된 사전 설정은 삭제할 수 없습니다" msgid "The following presets inherits this preset." @@ -15597,6 +18799,15 @@ msgstr[0] "다음 사전 설정은 이 사전 설정을 상속합니다." msgid "Delete Preset" msgstr "사전 설정 삭제" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"선택한 사전 설정을 삭제하시겠습니까?\n" +"프리셋이 현재 프린터에서 사용 중인 필라멘트와 일치하는 경우,해당 슬롯의 필라" +"멘트 정보를 재설정해 주세요." + msgid "Are you sure to delete the selected preset?" msgstr "선택한 사전 설정을 삭제하시겠습니까?" @@ -15606,11 +18817,8 @@ msgstr "사전 설정 삭제" msgid "+ Add Preset" msgstr "+ 사전 설정 추가" -msgid "Delete Filament" -msgstr "필라멘트 삭제" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" @@ -15649,19 +18857,34 @@ msgid "Daily Tips" msgstr "일일 팁" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "기억된 노즐: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"미리 설정된 노즐 직경이 기억된 노즐 직경과 일치하지 않습니다.직경. 최근에 노" -"즐을 바꾸셨나요?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*%s 재료를 %s로 출력하면 노즐이 손상될 수 있습니다" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "프린터 선택 필요" @@ -15669,6 +18892,35 @@ msgstr "프린터 선택 필요" msgid "The start, end or step is not valid value." msgstr "시작, 끝 또는 단계가 유효한 값이 아닙니다." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15691,9 +18943,6 @@ msgstr "성공!" msgid "Are you sure to log out?" msgstr "정말 로그아웃하시겠습니까?" -msgid "Refresh Printers" -msgstr "프린터 새로 고침" - msgid "View print host webui in Device tab" msgstr "기기 탭에서 출력 호스트의 웹UI 표시" @@ -15737,22 +18986,22 @@ msgstr "출력 호스트를 통해 연결된 프린터에 연결하지 못했습 msgid "Mismatched type of print host: %s" msgstr "일치하지 않는 출력 호스트 유형: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "AstroBox 연결이 올바르게 작동합니다." msgid "Could not connect to AstroBox" msgstr "AstroBox에 연결할 수 없습니다" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "참고: AstroBox 버전 1.1.0 이상이 필요합니다." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Duet 연결이 제대로 작동합니다." msgid "Could not connect to Duet" msgstr "Duet에 연결할 수 없습니다" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "알 수 없는 오류가 발생했습니다" msgid "Wrong password" @@ -15764,7 +19013,7 @@ msgstr "새 연결을 생성하기 위한 리소스를 얻을 수 없습니다" msgid "Upload not enabled on FlashAir card." msgstr "FlashAir 카드에서는 업로드가 활성화되지 않았습니다." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "FlashAir 연결이 올바르게 작동하고 업로드가 활성화되었습니다." msgid "Could not connect to FlashAir" @@ -15777,28 +19026,28 @@ msgstr "" "참고: 펌웨어 2.00.02 또는 이후 버전을 사용중이며 업로드 기능이 활성화된 " "FlashAir가 필요합니다." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "MKS에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to MKS" msgstr "MKS에 연결할 수 없습니다" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "OctoPrint에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to OctoPrint" msgstr "OctoPrint에 연결할 수 없습니다" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "참고: OctoPrint 버전 1.1.0 이상이 필요합니다." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Prusa SL1 / SL1S에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Prusa SLA" msgstr "Prusa SLA에 연결할 수 없습니다" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "PrusaLink에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to PrusaLink" @@ -15822,19 +19071,19 @@ msgstr "%1%: 여유 공간이 없습니다" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "업로드에 실패했습니다. %1%에 적합한 저장소가 없습니다." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Prusa Connect에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Prusa Connect" msgstr "Prusa Connect에 연결할 수 없습니다" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Repetier에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Repetier" msgstr "Repetier에 연결할 수 없습니다" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "참고: 최소 0.90.0 이상의 반복 버전이 필요합니다." #, boost-format @@ -15866,16 +19115,16 @@ msgstr "" "오류: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "레이어 높이가 작기 때문에 레이어 라인이 거의 무시할 수 있고 출력 품질이 높습" "니다. 대부분의 일반적인 출력 케이스에 적합합니다." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "0.2mm 노즐의 기본 프로파일과 비교하면 속도와 가속도가 낮고 성긴 채우기 패턴" "은 자이로이드입니다. 따라서 출력 품질은 훨씬 높아지지만 출력 시간은 훨씬 길어" @@ -15883,67 +19132,62 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 약간 더 크고 레이어 라인" "이 거의 무시할 수 있으며 출력 시간이 약간 짧아집니다." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 선이 약간 " "눈에 띄지만 출력 시간은 더 짧아집니다." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인이 " -"거의 보이지 않고 출력 품질이 높아지지만 출력 시간은 단축됩니다." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 라인이 더 작고 속도와 가속도가 " "낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 선이 거의 보이지 않" "고 출력 품질이 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인이 " -"최소화되고 출력 품질이 높아지지만 출력 시간은 단축됩니다." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 라인이 더 작고 속도와 가속도가 " "낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 라인이 최소화되고 " "출력 품질이 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "이는 일반적인 레이어 높이를 가지며 일반적인 레이어 선과 출력 품질을 가져옵니" "다. 대부분의 일반적인 출력 케이스에 적합합니다." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하여 더 많은 벽 루프와 더 높은 성긴 채우기 " "밀도를 갖습니다. 따라서 출력 강도는 높아지지만 필라멘트 소비가 늘어나고 출력 " @@ -15951,24 +19195,24 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 " "뚜렷해지고 출력 품질이 낮아지지만 출력 시간은 약간 짧아집니다." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 " "뚜렷해지고 출력 품질이 낮아지지만 출력 시간은 짧아집니다." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 " "뚜렷하고 출력 품질이 높아지지만 출력 시간은 길어집니다." @@ -15976,8 +19220,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작고 속도와 가속도가 " "낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 선이 덜 뚜렷해지고 " @@ -15985,8 +19229,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아 레이어 라인이 거" "의 무시할 수 있고 출력 품질이 높아지지만 출력 시간은 길어집니다." @@ -15994,8 +19238,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작고 속도와 가속도가 " "낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 라인은 거의 무시할 " @@ -16003,23 +19247,22 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인을 " "거의 무시할 수 있고 출력 시간이 길어집니다." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "레이어 높이가 커서 레이어 선이 뚜렷이 보이고 출력 품질과 출력 시간이 보통입니" "다." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "0.6mm 노즐의 기본 프로파일과 비교하여 더 많은 벽 루프와 더 높은 성긴 채우기 " "밀도를 갖습니다. 따라서 출력 강도는 높아지지만 필라멘트 소비가 늘어나고 출력 " @@ -16027,16 +19270,16 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 " "뚜렷해지고 출력 품질이 낮아지지만 일부 출력의 경우 출력 시간이 짧아집니다." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 훨" "씬 더 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 짧" @@ -16044,50 +19287,41 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 " "뚜렷해지고 출력 품질이 약간 높아지지만 출력 시간은 길어집니다." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 " "뚜렷하고 출력 품질이 높아지지만 출력 시간이 길어집니다." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"레이어 높이가 매우 커서 레이어 선이 매우 뚜렷하고 출력 품질이 낮으며 일반적" -"인 출력 시간이 소요됩니다." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 매" -"우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 짧아집" -"니다." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 훨씬 더 크고 레이어 라인" -"이 매우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 " -"훨씬 짧아집니다." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 약간 더 작아서 약간 적지" "만 여전히 뚜렷한 레이어 라인이 나타나고 출력 품질이 약간 높아지지만 일부 출력" @@ -16095,12 +19329,319 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "AMS 없음" + +msgid "There is no device available to send printing." +msgstr "출력을 전송할 수 있는 장치가 없습니다." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "동시에 사용 중인 프린터의 수는 0과 같을 수 없습니다." + +msgid "Use External Spool" +msgstr "외부 스풀 사용" + +msgid "Select Printers" +msgstr "프린터 선택" + +msgid "Device Name" +msgstr "장치 이름" + +msgid "Device Status" +msgstr "장치 상태" + +msgid "AMS Status" +msgstr "AMS 상태" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "여기에서 관리할 장치를 선택하세요 (최대 6개 장치)" + +msgid "Printing Options" +msgstr "출력 옵션" + +msgid "Bed Leveling" +msgstr "베드 레벨링" + +msgid "Flow Dynamic Calibration" +msgstr "압출량 동적 보정" + +msgid "Send Options" +msgstr "전송 옵션" + +msgid "Send to" +msgstr "받는사람" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"프린터를 동시에 사용할 수 있습니다. (동시에 가열할 수 있는 장치 수에 따라 다" +"릅니다.)" + +msgid "Wait" +msgstr "대기" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"분 단위로 배치합니다. (가열을 완료하는 데 걸리는 시간에 따라 다릅니다.)" + +msgid "Task Sending" +msgstr "작업 전송중" + +msgid "Task Sent" +msgstr "작업 전송됨" + +msgid "Edit multiple printers" +msgstr "여러 프린터 편집" + +msgid "Select connected printers (0/6)" +msgstr "연결된 프린터 선택 (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "연결된 프린터 선택 (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "선택할 수 있는 최대 프린터 수는 %d입니다" + +msgid "No task" +msgstr "작업 없음" + +msgid "Edit Printers" +msgstr "프린터 편집" + +msgid "Task Name" +msgstr "작업 이름" + +msgid "Actions" +msgstr "동작" + +msgid "Task Status" +msgstr "작업 상태" + +msgid "Sent Time" +msgstr "전송한 시간" + +msgid "There are no tasks to be sent!" +msgstr "전송할 작업이 없습니다!" + +msgid "No historical tasks!" +msgstr "작업 내역이 없습니다!" + +msgid "Upgrading" +msgstr "업그레이드 하기" + +msgid "syncing" +msgstr "동기화" + +msgid "Printing Finish" +msgstr "출력 완료" + +msgid "Printing Failed" +msgstr "출력 실패" + +msgid "Printing Pause" +msgstr "출력 일시중지" + +msgid "Pending" +msgstr "대기중" + +msgid "Sending" +msgstr "전송중" + +msgid "Sending Finish" +msgstr "보내기 완료" + +msgid "Sending Cancel" +msgstr "보내기 취소" + +msgid "Sending Failed" +msgstr "전송 실패" + +msgid "Print Success" +msgstr "출력 성공" + +msgid "Print Failed" +msgstr "출력 실패" + +msgid "Removed" +msgstr "삭제됨" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선은 적" -"지만 여전히 뚜렷하고 출력 품질은 약간 높지만 일부 출력의 경우 출력 시간이 길" -"어집니다." msgid "Connected to Obico successfully!" msgstr "Obico에 성공적으로 연결되었습니다!" @@ -16124,11 +19665,11 @@ msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" "SimplyPrint 계정이 연결되지 않았습니다. 연결 옵션으로 이동하여 설정합니다." -msgid "Connection to Flashforge works correctly." -msgstr "플래시포지 연결이 정상적으로 작동합니다." +msgid "Serial connection to Flashforge is working correctly." +msgstr "" -msgid "Could not connect to Flashforge" -msgstr "플래시포지 연결할 수 없음" +msgid "Could not connect to Flashforge via serial" +msgstr "" msgid "The provided state is not correct." msgstr "제공된 상태가 올바르지 않습니다." @@ -16140,9 +19681,114 @@ msgid "Something unexpected happened when trying to log in, please try again." msgstr "" "로그인을 시도하는 동안 예기치 않은 문제가 발생했습니다. 다시 시도해 주세요." -msgid "User cancelled." +msgid "User canceled." msgstr "사용자가 취소했습니다." +msgid "Head diameter" +msgstr "헤드 직경" + +msgid "Max angle" +msgstr "최대 각도" + +msgid "Detection radius" +msgstr "감지 반경" + +msgid "Remove selected points" +msgstr "선택한 지점 제거" + +msgid "Remove all" +msgstr "모두 제거" + +msgid "Auto-generate points" +msgstr "포인트 자동 생성" + +msgid "Add a brim ear" +msgstr "브림 귀 추가" + +msgid "Delete a brim ear" +msgstr "브림 귀 삭제" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "섹션 보기 조정" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"경고: 브림 유형이 “페인트”로 설정되어 있지 않으면 브림 귀가 적용되지 않습니" +"다!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " 유효하지 않은 브림 귀" + +msgid "Brim Ears" +msgstr "브림 귀" + +msgid "Please select single object." +msgstr "단일 객체를 선택하세요." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16161,7 +19807,7 @@ msgid "" "overhangs?" msgstr "" "샌드위치 모드\n" -"모델에 가파른 돌출부가 없는 경우 샌드위치 모드(내부-외부-내부)를 사용하여 정" +"모델에 가파른 오버행이 없는 경우 샌드위치 모드(내부-외부-내부)를 사용하여 정" "밀도와 레이어 일관성을 향상시킬 수 있다는 것을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Chamber temperature] @@ -16203,8 +19849,8 @@ msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" -"G코드 창\n" -"C 키를 눌러 G코드 창을 켜거나 끌 수 있습니다." +"Gcode 창\n" +"C 키를 눌러 Gcode 창을 켜거나 끌 수 있습니다." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -16220,7 +19866,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "키보드 단축키를 사용하는 방법\n" "Snapmaker Orca는 다양한 키보드 단축키와 3D 장면 작업을 제공합니다." @@ -16266,19 +19912,19 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "자동 정렬\n" -"프로젝트의 모든 개체를 자동 정렬할 수 있다는 것을 알고 계섰나요?" +"프로젝트의 모든 객체를 자동 정렬할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "자동 방향 지정\n" -"간단한 클릭만으로 개체를 최적의 출력 방향으로 회전할 수 있다는 것을 알고 계셨" +"간단한 클릭만으로 객체를 최적의 출력 방향으로 회전할 수 있다는 것을 알고 계셨" "나요?" #: resources/data/hints.ini: [hint:Lay on Face] @@ -16298,8 +19944,8 @@ msgid "" "Did you know that you can view all objects/parts in a list and change " "settings for each object/part?" msgstr "" -"개체 목록\n" -"목록의 모든 개체/부품을 보고 각 개체/부품에 대한 설정을 변경할 수 있다는 것" +"객체 목록\n" +"목록의 모든 객체/부품을 보고 각 객체/부품에 대한 설정을 변경할 수 있다는 것" "을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Search Functionality] @@ -16319,7 +19965,7 @@ msgid "" "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "모델 단순화\n" -"메쉬 단순화 기능을 사용하여 메쉬의 삼각형 수를 줄일 수 있다는 것을 알고 계셨" +"메시 단순화 기능을 사용하여 메시의 삼각형 수를 줄일 수 있다는 것을 알고 계셨" "나요? 모델을 마우스 오른쪽 버튼으로 클릭하고 모델 단순화를 선택하세요." #: resources/data/hints.ini: [hint:Slicing Parameter Table] @@ -16329,7 +19975,7 @@ msgid "" "settings for each object/part?" msgstr "" "슬라이싱 매개변수 테이블\n" -"테이블의 모든 개체/부품을 보고 각 개체/부품에 대한 설정을 변경할 수 있다는 것" +"테이블의 모든 객체/부품을 보고 각 객체/부품에 대한 설정을 변경할 수 있다는 것" "을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] @@ -16338,8 +19984,8 @@ msgid "" "Did you know that you can split a big object into small ones for easy " "colorizing or printing?" msgstr "" -"개체/부품으로 분할\n" -"쉽게 색칠하거나 출력하기 위해 큰 개체를 작은 개체로 나눌 수 있다는 것을 알고 " +"객체/부품으로 분할\n" +"쉽게 색칠하거나 출력하기 위해 큰 객체를 작은 객체로 나눌 수 있다는 것을 알고 " "계섰나요?" #: resources/data/hints.ini: [hint:Subtract a Part] @@ -16375,10 +20021,10 @@ msgid "" "paint it on your print, to have it in a less visible location? This improves " "the overall look of your model. Check it out!" msgstr "" -"Z 솔기 위치\n" -"Z 솔기의 위치를 사용자 정의하고 출력물에 칠하여 잘 보이지 않는 위치에 배치할 " -"수 있다는 사실을 알고 계섰나요? 이렇게 하면 모델의 전반적인 모양이 향상됩니" -"다. 확인해 보세요!" +"Z 재봉선 위치\n" +"Z 재봉선의 위치를 사용자 정의하고 출력물에 칠하여 잘 보이지 않는 위치에 배치" +"할 수 있다는 사실을 알고 계섰나요? 이렇게 하면 모델의 전반적인 모양이 향상됩" +"니다. 확인해 보세요!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" @@ -16387,8 +20033,8 @@ msgid "" "prints? Depending on the material, you can improve the overall finish of the " "printed model by doing some fine-tuning." msgstr "" -"유량 미세 조정\n" -"더 보기 좋은 출력물을 위해 유량을 미세 조정할 수 있다는 사실을 알고 계셨나" +"압출량 미세 조정\n" +"더 보기 좋은 출력물을 위해 압출량을 미세 조정할 수 있다는 사실을 알고 계셨나" "요? 재료에 따라 약간의 미세 조정을 통해 출력된 모델의 전체적인 마감을 개선할 " "수 있습니다." @@ -16421,9 +20067,9 @@ msgid "" "makes it easy to place the support material only on the sections of the " "model that actually need it." msgstr "" -"지지대 칠하기\n" -"지지대의 위치를 칠할 수 있다는 것을 알고 계섰나요? 이 기능을 사용하면 실제로 " -"필요한 모델 부위에만 지지대 재료를 쉽게 배치할 수 있습니다." +"서포트 칠하기\n" +"서포트의 위치를 칠할 수 있다는 것을 알고 계섰나요? 이 기능을 사용하면 실제로 " +"필요한 모델 부위에만 서포트 재료를 쉽게 배치할 수 있습니다." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" @@ -16432,8 +20078,8 @@ msgid "" "supports work great for organic models, while saving filament and improving " "print speed. Check them out!" msgstr "" -"다양한 유형의 지지대\n" -"여러 유형의 지지대 중에서 선택할 수 있다는 것을 알고 계섰나요? 나무 지지대는 " +"다양한 유형의 서포트\n" +"여러 유형의 서포트 중에서 선택할 수 있다는 것을 알고 계섰나요? 트리 서포트는 " "필라멘트를 절약하고 출력 속도를 향상시키면서 유기 모델에 적합합니다. 확인해 " "보세요!" @@ -16451,7 +20097,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "접착력이 더 좋아지는 브림\n" @@ -16462,10 +20108,10 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" -"여러 개체에 대한 매개변수 설정\n" -"선택한 모든 개체에 대한 슬라이싱 매개변수를 한 번에 설정할 수 있다는 사실을 " +"여러 객체에 대한 매개변수 설정\n" +"선택한 모든 객체에 대한 슬라이싱 매개변수를 한 번에 설정할 수 있다는 사실을 " "알고 계섰나요?" #: resources/data/hints.ini: [hint:Stack objects] @@ -16473,17 +20119,17 @@ msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" -"개체 쌓기\n" +"객체 쌓기\n" "물건을 통째로 쌓을 수 있다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" -"지지대/개체/채우기에 내보내기\n" -"필라멘트를 교체하는 동안 낭비되는 필라멘트를 지지대/개체/채우기 출력에 활용" +"서포트/객체/채우기에 내보내기\n" +"필라멘트를 교체하는 동안 낭비되는 필라멘트를 서포트/객체/채우기 출력에 활용" "할 수 있다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Improve strength] @@ -16496,13 +20142,14 @@ msgstr "" "더 많은 외벽과 더 높은 드문 채우기 밀도를 사용하여 모델의 강도를 높일 수 있다" "는 사실을 알고 계섰나요?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "프린터 도어를 연 상태로 출력해야 하는 경우\n" "더 높은 프린터 내부 온도로 낮은 온도의 필라멘트를 출력할 때 프린터 도어를 열" @@ -16514,23 +20161,613 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "뒤틀림 방지\n" "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 " "높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?" -#~ msgid "up to" -#~ msgstr "까지" +#~ msgid "Adaptive layer height" +#~ msgstr "적응형 레이어 높이" -#~ msgid "above" -#~ msgstr "위에" +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "이 옵션을 활성화하면 첫 번째 레이어를 제외한 트리 서포트의 레이어 높이가 " +#~ "자동으로 계산됩니다 " -#~ msgid "from" -#~ msgstr "부터" +#~ msgid "AMS not connected" +#~ msgstr "AMS가 연결되지 않음" -#~ msgid "Switching application language while some presets are modified." -#~ msgstr "일부 사전 설정이 수정되는 동안 응용 프로그램 언어를 전환합니다." +#~ msgid "Ext Spool" +#~ msgstr "외부 스풀" + +#~ msgid "Guide" +#~ msgstr "가이드" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS 교정 중..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "교정하는 동안 문제가 발생했습니다. 솔루션을 보려면 클릭하세요." + +#~ msgid "Calibrate again" +#~ msgstr "재교정" + +#~ msgid "Cancel calibration" +#~ msgstr "교정 취소" + +#~ msgid "Feed Filament" +#~ msgstr "필라멘트 공급" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "LAN을 통해 출력하기 전에 SD 카드를 삽입해야 합니다." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "프린터로 전송 전에 SD 카드를 삽입해야 합니다." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "참고: 동일한 재료 유형으로 장착된 AMS 슬롯만 선택할 수 있습니다." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "AMS에 두 개의 동일한 필라멘트가 있는 경우 AMS 필라멘트 백업이 활성화됩니" +#~ "다.\n" +#~ "(현재 동일한 브랜드, 재질, 색상의 소모품 자동 공급 지원)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS는 필라멘트 정보가 업데이트된 후 뱀부 필라멘트의 잔여 용량을 추정할 것" +#~ "입니다. 출력하는 동안 남은 용량이 자동으로 업데이트됩니다." + +#, fuzzy +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "권장 최저 온도는 190도 미만 또는 권장 최고 온도는 300도 이상입니다.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "나선형 모드는 벽 루프 1, 서포트 비활성화, 상단 셸 레이어 0, 드문 채우기 밀" +#~ "도 0, 타임랩스 유형이 기존인 경우에만 작동합니다." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "스위핑 XY 기계 모드" + +#~ msgid "Paused due to filament runout" +#~ msgstr "필라멘트 소진으로 일시 정지됨" + +#~ msgid "Heating hotend" +#~ msgstr "핫엔드 가열 중" + +#~ msgid "Calibrating extrusion" +#~ msgstr "압출 교정 중" + +#~ msgid "Printing was paused by the user" +#~ msgstr "사용자가 출력을 일시 정지했습니다" + +#~ msgid "Pause of front cover falling" +#~ msgstr "전면 커버 분리로 일시 정지됨" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "압출 압출량 교정" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "노즐 온도 오작동으로 일시 정지됨" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "히트 베드 온도 오작동으로 일시 정지됨" + +#~ msgid "Skip step pause" +#~ msgstr "단계 건너뛰기 일시중지" + +#~ msgid "Motor noise calibration" +#~ msgstr "모터 소음 교정" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "AMS 정보 손실로 인해 일시중지됨" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "느린 방열팬 속도로 일시중지됨" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "챔버 온도 제어 오류로 인해 일시 중지됨" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "사용자가 삽입한 Gcode로 인해 일시중지됨" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "노즐 필라멘트가 덮여있는게 감지되어 일시중지" + +#~ msgid "Cutter error pause" +#~ msgstr "커터 오류 일시중지" + +#~ msgid "First layer error pause" +#~ msgstr "첫번째 레이어 오류 일시중지" + +#~ msgid "Nozzle clog pause" +#~ msgstr "노즐 막힘 일시 중지" + +#~ msgid "Fatal" +#~ msgstr "치명적" + +#~ msgid "Serious" +#~ msgstr "심각한" + +#~ msgid "Common" +#~ msgstr "일반적" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "현재 챔버 온도 또는 목표 챔버 온도가 45℃를 초과합니다. 압출기 막힘을 방지" +#~ "하기 위해 저온 필라멘트(PLA/PETG/TPU)를 로드할 수 없습니다." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "압출기에 저온 필라멘트(PLA/PETG/TPU)가 장착되어 있습니다. 압출기 막힘을 방" +#~ "지하기 위해 챔버 온도를 45℃ 이상으로 설정할 수 없습니다." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "뱀부 PET-CF/PA6-CF는 AMS에서 지원되지 않습니다." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "객체가 플레이트 경계를 넘었거나 높이 제한을 초과했습니다.\n" +#~ "플레이트 위 또는 밖으로 완전히 이동시키고 높이가 빌드 출력 가능 영역 내에 " +#~ "있는지 확인하여 문제를 해결하세요." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "\"설정 > 네트워크 > 연결코드\"에서 확인하실 수 있습니다\n" +#~ "또는 그림에 표시된 것처럼 프린터에 표시됩니다:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "현재 펌웨어에서는 SD 카드의 파일 검색이 지원되지 않습니다. 프린터 펌웨어" +#~ "를 업데이트하세요." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "프린터에 Micro SD 카드가 삽입되어 있는지 확인하세요.\n" +#~ "그래도 읽을 수 없으면 카드를 포맷해 보세요." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "LAN 전용 모드에서는 SD 카드의 파일 탐색이 지원되지 않습니다." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "저장소를 사용할 수 없습니다. SD 카드를 삽입하세요." + +#~ msgid "Cham" +#~ msgstr "챔버" + +#~ msgid "Still unload" +#~ msgstr "언로드중" + +#~ msgid "Still load" +#~ msgstr "로드중" + +#~ msgid "Can't start this without SD card." +#~ msgstr "SD 카드가 없으면 시작할 수 없습니다." + +#~ msgid "Update" +#~ msgstr "업데이트" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "일시 정지 감도" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "AMS 필라멘트가 없습니다. AMS 정보를 불러오려면 '장치' 페이지에서 프린터를 " +#~ "선택하세요." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "AMS와 동기화된 필라멘트는 현재 선택된 모든 필라멘트 사전 설정 및 색상을 삭" +#~ "제합니다. 계속하시겠습니까?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "이미 동기화를 수행했습니다. 변경 사항만 동기화하시겠습니까? 아니면 다시 동" +#~ "기화하시겠습니까?" + +#~ msgid "Sync" +#~ msgstr "동기화" + +#~ msgid "Resync" +#~ msgstr "재 동기화" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "일반 사전 설정에 매핑된 알 수 없는 필라멘트가 있습니다. Snapmaker Orca를 업데" +#~ "이트하거나 Snapmaker Orca를 다시 시작하여 시스템 사전 설정에 대한 업데이트가 " +#~ "있는지 확인하세요." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "로컬 경로가 있는 원본 SVG를 3MF 파일에 저장하시겠습니까?\n" +#~ "'아니요'를 누르면 프로젝트의 모든 SVG를 더 이상 편집할 수 없습니다." + +#~ msgid "Private protection" +#~ msgstr "개인정보 보호" + +#~ msgid "General Settings" +#~ msgstr "일반 설정" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "시작 후 \"오늘의 팁\" 알림 표시" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "활성화하면 시작 시 유용한 힌트가 표시됩니다." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "플러시 볼륨: 색상이 변경될 때마다 자동 계산됩니다." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "활성화하면 색상이 변경될 때마다 자동 계산됩니다." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "플러싱량: 필라멘트가 교체될 때마다 자동 계산됩니다." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "활성화하면 필라멘트가 교체될 때마다 자동 계산됩니다" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "객체를 복제한 후 플레이트를 자동으로 정렬합니다" + +#~ msgid "Network" +#~ msgstr "네트워크" + +#~ msgid "User Sync" +#~ msgstr "사용자 동기화" + +#~ msgid "System Sync" +#~ msgstr "시스템 동기화" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Snapmaker Orca에 URL 연결" + +#~ msgid "every" +#~ msgstr "매번" + +#~ msgid "Downloads" +#~ msgstr "다운로드" + +#~ msgid "Dark Mode" +#~ msgstr "다크 모드" + +#~ msgid "Home page and daily tips" +#~ msgstr "홈페이지 및 데일리 팁" + +#~ msgid "Show home page on startup" +#~ msgstr "시작 시 홈페이지 표시" + +#~ msgid "Please choose the filament color" +#~ msgstr "필라멘트 색상을 선택해 주세요" + +#~ msgid "Send print job to" +#~ msgstr "출력 작업 보내기" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "필라멘트 %s가 AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린터 " +#~ "펌웨어를 업데이트하세요." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "필라멘트가 AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린터 펌" +#~ "웨어를 업데이트하세요." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "AMS 슬롯 매핑에 대한 필라멘트가 설정되었습니다. 위의 필라멘트를 클릭하여 " +#~ "매핑 AMS 슬롯을 변경할 수 있습니다" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "출력 작업을 보내기 전에 위의 각 필라멘트를 클릭하여 매핑 AMS 슬롯을 지정하" +#~ "세요" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "프린터 펌웨어는 필라멘트 => AMS 슬롯의 순차 매핑만 지원합니다." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "출력하기 전에 SD 카드를 삽입해야 합니다." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "타임랩스를 녹화하려면 SD 카드를 삽입해야 합니다." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "기억된 노즐: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "슬라이스 파일의 노즐 직경이 기억된 노즐과 일치하지 않습니다. 최근에 노즐" +#~ "을 변경한 경우 장치 > 프린터 부품으로 이동하여 설정을 변경하세요." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "고온 재료(%s 재료)를 %s로 출력하면 노즐이 손상될 수 있습니다" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "프린터에 연결 중입니다. 연결 진행 중에는 취소할 수 없습니다." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "사용상의 주의! 텍스처 PEI 플레이트의 압출량 교정은 표면이 분산되어 실패할 " +#~ "수 있습니다." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "마이크로 라이다를 사용한 자동 압출량 교정" + +#~ msgid "Send to Printer SD card" +#~ msgstr "프린터 SD 카드로 보내기" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "프린터 SD 카드로 보내기 전에 SD 카드를 삽입해야 합니다." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "프린터는 프린터 SD 카드로의 전송을 지원하지 않습니다." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "색상 개수는 [%d, %d] 범위 내에 있어야 합니다." + +#~ msgid "Current filament colors:" +#~ msgstr "현재 필라멘트 색상:" + +#~ msgid "Quick set:" +#~ msgstr "빠른 설정:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "기존 압출기 뒤에 소모성 압출기를 추가합니다." + +#~ msgid "Cluster colors" +#~ msgstr "클러스터 색상" + +#~ msgid "Map Filament" +#~ msgstr "지도 필라멘트" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "참고: 색상이 선택되었습니다. 확인을 누르시면\n" +#~ "계속하거나 수동으로 조정할수 있습니다." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "경고: 새로 추가된 개수와\n" +#~ "현재 압출기는 16개를 초과합니다." + +#~ msgid "Auto-Calc" +#~ msgstr "자동 계산" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca는 필라멘트 색상이 변경될 때마다 버리기 볼륨을 다시 계산합니다. Orca " +#~ "Slicer > 기본 설정에서 자동 계산을 비활성화할 수 있습니다" + +#~ msgid "unloaded" +#~ msgstr "언로드됨" + +#~ msgid "loaded" +#~ msgstr "로드됨" + +#~ msgid "Filament #" +#~ msgstr "필라멘트 #" + +#~ msgid "From" +#~ msgstr "에서" + +#~ msgid "To" +#~ msgstr "으로" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "출력 재개(결함 허용)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "출력 재개(문제 해결)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "1단계. 오르카 슬라이서와 프린터가 동일한 LAN에 있는지 확인하세요." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2단계. 아래 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 이를 수정하세" +#~ "요." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "3단계. 프린터 측에서 장치 SN을 받으세요. 일반적으로 프린터 화면의 장치 정" +#~ "보에서 찾을 수 있습니다." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "온도 차이가 큰 필라멘트를 여러 개 함께 출력할 수 없습니다. 그렇지 않으면 " +#~ "출력 중에 압출기와 노즐이 막히거나 손상될 수 있습니다" + +#~ msgid "Ironing angle" +#~ msgstr "다림질 각도" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "다림질이 해당 각도에서 실행됩니다. 음수는 이 기능을 비활성화하고 기본값을 " +#~ "사용합니다." + +#~ msgid "Remove small overhangs" +#~ msgstr "작은 오버행 서포트 제거" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "서포트가 필요하지 않은 작은 오버행에서 서포트를 제거합니다." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "단 하나의 결과만을 같은 이름으로 저장할 수 있습니다. 다른 결과들을 덮어쓸" +#~ "까요?" + +#~ msgid "External Spool" +#~ msgstr "외부 스풀" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "유효한 값을 입력하세요:\n" +#~ "시작 온도: <= 350\n" +#~ "종료 온도: >= 170\n" +#~ "시작온도 > 종료온도 + 5)" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "사용자 정의 프린터 또는 모델이 입력되지 않았습니다. 입력하세요." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "미리 설정된 노즐: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "미리 설정된 노즐 직경이 기억된 노즐 직경과 일치하지 않습니다.직경. 최근에 " +#~ "노즐을 바꾸셨나요?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*%s 재료를 %s로 출력하면 노즐이 손상될 수 있습니다" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 " +#~ "향상시킵니다." + +#~ msgid "Enable filament ramming." +#~ msgstr "필라멘트 채워넣기 활성화" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + 마우스 휠" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + 마우스 휠" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + 마우스 왼쪽 버튼" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + 마우스 위 or 아래" + +#~ msgid "Left mouse button:" +#~ msgstr "마우스 왼쪽 버튼:" + +#~ msgid "Right mouse button:" +#~ msgstr "마우스 오른쪽 버튼:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + 마우스 왼쪽 버튼:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + 마우스 오른쪽 버튼:" + +#~ msgid "Recent projects" +#~ msgstr "최근 프로젝트" + +#~ msgid "Maximum recent projects" +#~ msgstr "최근 프로젝트 최대 표시" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "최근 프로젝트의 최대 표시 수" #~ msgid "⌘+Shift+G" #~ msgstr "⌘+Shift+G" @@ -16538,6 +20775,12 @@ msgstr "" #~ msgid "Ctrl+Shift+G" #~ msgstr "Ctrl+Shift+G" +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + #~ msgid "⌘+Any arrow" #~ msgstr "⌘+아무 화살표" @@ -16556,6 +20799,12 @@ msgstr "" #~ msgid "Ctrl+Left mouse button" #~ msgstr "Ctrl+마우스 왼쪽 버튼" +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+마우스 왼쪽 버튼" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+화살표" + #~ msgid "⌘+Mouse wheel" #~ msgstr "⌘+마우스 휠" @@ -16568,6 +20817,981 @@ msgstr "" #~ msgid "Alt+Mouse wheel" #~ msgstr "Alt+마우스 휠" +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+마우스 휠" + +#~ msgid "Set Position" +#~ msgstr "위치 설정" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "아이콘을 마우스 우클릭하여 모델 객체를 고칩니다" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "대상 객체는 한 부품만 포함하고 있어 분할할 수 없습니다." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "색 구성표" + +#~ msgid "Percent" +#~ msgstr "퍼센트" + +#~ msgid "Used filament" +#~ msgstr "사용된 필라멘트" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "더보기..." + +#~ msgid "More calibrations" +#~ msgstr "추가 교정" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SD 카드" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "SD 카드 없음" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD 카드 이상" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "%s(%s) 장치를 꺼내지 못했습니다." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "이 옵션은 나중에 환경설정에서 '로드 동작'에서 변경할 수 있습니다." + +#~ msgid "Invalid number" +#~ msgstr "잘못된 번호" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "기억된 노즐: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "냉각판 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트(슈퍼택)에 출력할 " +#~ "수 없음을 의미합니다." + +#~ msgid "Ramming settings" +#~ msgstr "채워넣기 설정" + +#~ msgid "Profile dependencies" +#~ msgstr "프로필 종속성" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "구성 패키지가 현재 애플리케이션과 호환되지 않습니다." + +#~ msgid "Total ramming time" +#~ msgstr "총 채워넣기 시간" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "총 채워넣은 부피" + +#~ msgid "Ramming line width" +#~ msgstr "채워넣기 선 너비" + +#~ msgid "Ramming line spacing" +#~ msgstr "채워넣기 선 간격" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "재개" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "클래식 모드" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "클래식 모드를 사용하려면 이 옵션을 활성화합니다" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Enable this option to slow down printing in areas where perimeters may " +#~ "have curled upwards.For example, additional slowdown will be applied when " +#~ "printing overhangs on sharp corners like the front of the Benchy hull, " +#~ "reducing curling which compounds over multiple layers.\n" +#~ "\n" +#~ "It is generally recommended to have this option switched on unless your " +#~ "printer cooling is powerful enough or the print speed slow enough that " +#~ "perimeter curling does not happen. If printing with a high external " +#~ "perimeter speed, this parameter may introduce slight artifacts when " +#~ "slowing down due to the large variance in print speeds. If you notice " +#~ "artifacts, ensure your pressure advance is tuned correctly.\n" +#~ "\n" +#~ "Note: When this option is enabled, overhang perimeters are treated like " +#~ "overhangs, meaning the overhang speed is applied even if the overhanging " +#~ "perimeter is part of a bridge. For example, when the perimeters are 100% " +#~ "overhanging, with no wall supporting them from underneath, the 100% " +#~ "overhang speed will be applied." +#~ msgstr "" +#~ "주변이 위쪽으로 말릴 수 있는 영역에서 출력 속도를 늦추려면 이 옵션을 활성" +#~ "화합니다. 예를 들어 벤치 선체 전면과 같이 날카로운 모서리에 오버행를 출력" +#~ "할 때 추가 속도 저하가 적용되어 여러 레이어에 걸쳐 합성되는 말림을 줄입니" +#~ "다.\n" +#~ "\n" +#~ " 프린터 냉각 성능이 충분히 강력하거나 출력 속도가 느려 주변 말림이 발생하" +#~ "지 않는 한 일반적으로 이 옵션을 켜는 것이 좋습니다. 높은 외부 주변 속도로 " +#~ "출력하는 경우 이 매개변수는 출력 속도의 큰 차이로 인해 속도가 느려질 때 약" +#~ "간의 아티팩트가 발생할 수 있습니다. 아티팩트가 발견되면 압력 진행이 올바르" +#~ "게 조정되었는지 확인하십시오.\n" +#~ "\n" +#~ "참고: 이 옵션을 활성화하면 오버행 둘레가 오버행처럼 처리됩니다. 즉, 오버" +#~ "행 둘레가 교량의 일부인 경우에도 오버행 속도가 적용됩니다. 예를 들어, 둘레" +#~ "가 100% 돌출되어 있고 아래에서 이를 지지하는 벽이 없으면 100% 돌출 속도가 " +#~ "적용됩니다." + +#~ msgid "Compatible machine" +#~ msgstr "호환 장치" + +#~ msgid "Compatible machine condition" +#~ msgstr "호환 장치 상태" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "호환 프로세스 사전설정 상태" + +#~ msgid "Default filament color" +#~ msgstr "기본 필라멘트 색상" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "솔리드 채우기 방향 회전" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "각 레이어에 대해 솔리드 채우기 방향을 90° 회전합니다." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "작은 채우기 영역의 압출량을 조정하는 데 사용되는 압출량 보상 모델. 모델은 " +#~ "\"1.234,5.678\" 형식으로 한 줄에 하나씩 압출 길이 및 압출량 수정 계수에 대" +#~ "한 쉼표로 구분된 값 쌍으로 표현됩니다." + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "압출기의 출력 가능한 최대 레이어 높이입니다. 사용된 값은 적응형 레이어 높" +#~ "이를 활성화할 때 최대 레이어 높이를 제한합니다" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "압출기의 출력 가능한 최저 레이어 높이입니다. 사용된 값은 적응형 레이어 높" +#~ "이를 활성화할 때 최소 레이어 높이를 제한합니다" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "상단 레이어에서 후퇴" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "상단 레이어에 강제 후퇴를 적용합니다. 비활성화하면 힐버트 곡선과 같이 작" +#~ "은 움직임이 있는 매우 느린 패턴에서 막힘을 방지할 수 있습니다." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "긴 이동 중에 필라멘트가 흘러나오는 것을 방지하기 위해 압출기의 일정량의 재" +#~ "료를 뒤로 당깁니다. 후퇴를 비활성화하려면 0을 설정하세요" + +#~ msgid "Speed of retractions." +#~ msgstr "후퇴 속도" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "필라멘트를 압출기에 다시 로드하는 속도입니다. 0은 후퇴와 동일한 속도를 의" +#~ "미합니다" + +#~ msgid "Single loop draft shield" +#~ msgstr "단일 루프 드래프트 실드" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "드래프트 실드 루프를 첫 번째 레이어 뒤의 한 벽으로 제한합니다. 이 방법은 " +#~ "필라멘트를 보존하는 데 유용하지만 드래프트 실드가 휘어지거나 갈라질 수 있" +#~ "습니다." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "상단 접점 선의 간격. 0은 꽉찬 접점을 의미합니다" + +#~ msgid "" +#~ "Prevent transitioning back and forth between one extra wall and one less. " +#~ "This margin extends the range of extrusion widths which follow to " +#~ "[Minimum wall width - margin, 2 * Minimum wall width + margin]. " +#~ "Increasing this margin reduces the number of transitions, which reduces " +#~ "the number of extrusion starts/stops and travel time. However, large " +#~ "extrusion width variation can lead to under- or overextrusion problems. " +#~ "It's expressed as a percentage over nozzle diameter" +#~ msgstr "" +#~ "출력물의 벽 두께를 한 번 두껍게 한 다음 다시 한 번 더 얇게 하는 것을 방지" +#~ "합니다. 이 마진은 다음의 범위로 압출 너비를 확장합니다: [최소 벽 너비 - 마" +#~ "진, 2 * 최소 벽 너비 + 마진]. 이 마진이 증가하면 변환 횟수가 줄어들어 압" +#~ "출 시작/중지 횟수와 이동 시간이 줄어듭니다. 그러나, 큰 압출 너비 변동은 압" +#~ "출 과다 또는 압출 과소 문제를 일으킬 수 있습니다. 노즐 직경을 기준으로 백" +#~ "분율로 표시됩니다" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "얇은 형상의 최소 두께. 이 값보다 얇은 모델 형상은 출력되지 않으며, 최소 형" +#~ "상 크기보다 두꺼운 형상은 최소 벽 너비로 확대됩니다. 노즐 직경에 대한 백분" +#~ "율로 표시됩니다" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "uptodate 사용 시 최신 프로세스/프린터 설정 로드" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "최신 필라멘트 설정 사용 시 최신 필라멘트 설정 로드" + +#~ msgid "Downward machines settings" +#~ msgstr "하향 머신 설정" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "각 객체에 대한 필라멘트 ID 로드" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp;\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "이제 다양한 필라멘트에 대한 자동 교정 기능이 추가되었습니다. 이 기능은 완" +#~ "전히 자동화되었으며 결과는 나중에 사용할 수 있도록 프린터에 저장됩니다. 다" +#~ "음과 같은 제한된 경우에만 보정을 수행해야 합니다.\n" +#~ "1. 다른 브랜드/모델의 새로운 필라멘트를 도입하거나 필라멘트가 습기에 노출" +#~ "된 경우;\n" +#~ "2. 노즐이 낡았거나 새것으로 교체한 경우\n" +#~ "3. 필라멘트 설정에서 최대 압출 속도나 출력 온도가 변경된 경우." + +#~ msgid "step: " +#~ msgstr "단계: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "" +#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" +#~ "\".\n" +#~ "To add preset for more printers, Please go to printer selection" +#~ msgstr "" +#~ "사전 설정의 이름을 \"선택한 공급업체 유형 직렬 @프린터\"로 변경합니다.\n" +#~ "더 많은 프린터에 대한 사전 설정을 추가하려면 프린터 선택으로 이동하세요" + +#~ msgid "Load STL" +#~ msgstr "STL 불러오기" + +#~ msgid "Load svg" +#~ msgstr "SVG 불러오기" + +#~ msgid "Back Page 1" +#~ msgstr "뒤 페이지 1" + +#~ msgid "Delete Filament" +#~ msgstr "필라멘트 삭제" + +#~ msgid "Refresh Printers" +#~ msgstr "프린터 새로 고침" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인" +#~ "이 거의 보이지 않고 출력 품질이 높아지지만 출력 시간은 단축됩니다." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인" +#~ "이 최소화되고 출력 품질이 높아지지만 출력 시간은 단축됩니다." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "레이어 높이가 매우 커서 레이어 선이 매우 뚜렷하고 출력 품질이 낮으며 일반" +#~ "적인 출력 시간이 소요됩니다." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 " +#~ "매우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 " +#~ "짧아집니다." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 훨씬 더 크고 레이어 라" +#~ "인이 매우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시" +#~ "간이 훨씬 짧아집니다." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선은 " +#~ "적지만 여전히 뚜렷하고 출력 품질은 약간 높지만 일부 출력의 경우 출력 시간" +#~ "이 길어집니다." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "플래시포지 연결이 정상적으로 작동합니다." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "플래시포지 연결할 수 없음" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "브림 유형을 “페인트”로 설정합니다." + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "서포트 부피는 작지만 강도는 약한 것이 특징인 실험적 모양 \"얇은 트리\"를 " +#~ "추가했습니다.\n" +#~ "접점 레이어 0, 상단 Z 거리 0, 벽 루프 2 와 함께 사용하는 것이 좋습니다." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "\"강한 트리\" 및 \"혼합 트리\" 모양의 경우 최소 접점 레이어 2, 상단 Z 거" +#~ "리 0.1 또는 접점에서 서포트 재료를 사용하는 설정을 권장합니다." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "이중 벽이 있는 가지 직경" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "이 직경의 원 면적보다 더 큰 면적을 가진 가지는 안정성을 위해 이중벽으로 출" +#~ "력됩니다. 이중벽을 허용하지 않으려면 이 값을 0으로 설정합니다." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "이 설정은 서포트 주변의 벽 수를 지정합니다" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "서포트: 레이어 %d에서 툴 경로 생성" + +#~ msgid "Support: detect overhangs" +#~ msgstr "서포트: 돌출부 감지" + +#~ msgid "Support: propagate branches" +#~ msgstr "서포트: 가지 증식" + +#~ msgid "Support: draw polygons" +#~ msgstr "서포트: 폴리곤 그리기" + +#~ msgid "Support: generate toolpath" +#~ msgstr "서포트: 툴 경로 생성" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "서포트: 레이어 %d에서 폴리곤 생성" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "서포트: 레이어 %d의 구멍 수정" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "서포트: 레이어 %d에서 가지 증식" + +#~ msgid "Current Cabin humidity" +#~ msgstr "현재 기내 습도" + +#~ msgid "Stopped." +#~ msgstr "중지됨." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "[%d] 연결 실패!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "초기화 실패 (장치 연결 준비 안 됨)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "초기화에 실패했습니다(저장소를 사용할 수 없습니다. SD 카드를 삽입하세요.)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "(%s) 초기화 실패!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN 연결 실패(출력 파일 전송 중)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "1단계, Snapmaker Orca와 프린터가 동일한 네트워크에 연결되어 있는지 확인하세" +#~ "요." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2단계, 아래의 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 수정하세요." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "3단계: IP 주소를 ping하여 패킷 손실 및 대기 시간을 확인합니다." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "돌출부 및 브릿지 강제 냉각" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "냉각 향상을 위해 돌출부 및 브릿지에 대한 출력물 냉각 팬 속도를 최적화하려" +#~ "면 이 옵션을 활성화합니다" + +#~ msgid "Fan speed for overhang" +#~ msgstr "돌출부 팬 속도" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "돌출부 정도가 큰 브릿지나 돌출부 벽을 출력할 때 출력물 냉각 팬을 이 속도" +#~ "로 강제합니다. 돌출부와 브릿지를 강제 냉각하면 이러한 부품의 품질이 향상" +#~ "될 수 있습니다" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "돌출부 냉각 임계값" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "출력물의 돌출부 정도가 이 값을 초과하면 냉각 팬이 특정 속도가 되도록 강제" +#~ "합니다. 서포트가 없는 하단 레이어 선 너비의 백분율로 표시됩니다. 0은 돌출" +#~ "부 정도에 관계없이 모든 외벽을 강제 냉각한다는 의미입니다" + +#~ msgid "Bridge infill direction" +#~ msgstr "브릿지 채우기 방향" + +#~ msgid "Bridge density" +#~ msgstr "브릿지 밀도" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "외부 브릿지의 밀도. 100%는 단단한 브릿지를 의미합니다. 기본값은 100%입니" +#~ "다." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 " +#~ "향상시킵니다.\n" +#~ "참고: 이 설정은 벽 시퀀스가 내부-외부로 구성된 경우에만 적용됩니다" + +#~ msgid "Thick bridges" +#~ msgstr "두꺼운 브릿지" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "작은 내부 브릿지 필터링(베타)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "이 옵션은 심하게 기울어지거나 곡선이 있는 모델의 상단 표면이 눌리는 현상" +#~ "을 줄이는 데 도움이 될 수 있습니다.\n" +#~ "\n" +#~ "기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 채우기는 희박한 채우" +#~ "기 위에 직접 출력됩니다. 이는 대부분의 경우에 잘 작동하여 상단 표면 품질" +#~ "을 크게 저하시키지 않고 출력 속도를 높입니다.\n" +#~ "\n" +#~ "그러나 특히 너무 낮은 희박 채우기 밀도가 사용되는 심하게 기울어지거나 곡" +#~ "선 모델에서는 지지되지 않는 고체 채우기가 말려 베개 현상이 발생할 수 있습" +#~ "니다.\n" +#~ "\n" +#~ "이 옵션을 비활성화하면 약간 지원되지 않는 내부 솔리드 채우기 위에 내부 브" +#~ "릿지 레이어가 출력됩니다. 아래 옵션은 필터링 양, 즉 생성된 내부 브릿지 양" +#~ "을 제어합니다.\n" +#~ "\n" +#~ "필터 - 이 옵션을 활성화합니다. 이는 기본 동작이며 대부분의 경우 잘 작동합" +#~ "니다.\n" +#~ "\n" +#~ "제한된 필터링 - 불필요한 내부 브릿지 생성을 방지하면서 심하게 기울어진 표" +#~ "면에 내부 브릿지를 생성합니다. 이는 대부분의 어려운 모델에 적합합니다.\n" +#~ "\n" +#~ "필터링 없음 - 잠재적인 모든 내부 돌출부에 내부 브릿지를 생성합니다. 이 옵" +#~ "션은 심하게 기울어진 상단 표면 모델에 유용합니다. 그러나 대부분의 경우 불" +#~ "필요한 브릿지가 너무 많이 생성됩니다." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "이 설정값은 높은 팬 속도로 접점의 결합을 약화시킬 수 있도록 모든 서포트 접" +#~ "점(Support interface)에 적용됩니다.\n" +#~ "사용하지 않으려면 -1로 설정합니다.\n" +#~ "disable_fan_first_layers로만 재정의할 수 있습니다." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "더 나은 레이어 냉각을 위해 속도를 낮추는 경우 위의 최소 레이어 시간을 유지" +#~ "하기 위해 프린터가 느려지는 최소 출력 속도입니다." + +#~ msgid "" +#~ "normal(auto) and tree(auto) is used to generate support automatically. If " +#~ "normal(manual) or tree(manual) is selected, only support enforcers are " +#~ "generated." +#~ msgstr "" +#~ "일반(자동) 및 트리(자동)은 서포트를 자동으로 생성합니다. 일반(수동) 또는 " +#~ "트리(수동) 선택시에는 강제된 서포트만 생성됩니다" + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Shift + 왼쪽 마우스 버튼" + +#~ msgid "Unselect" +#~ msgstr "선택 취소" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "규모" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "강제 Z 올리기" + +#~ msgid "Z-hop when retract" +#~ msgstr "후퇴 시 Z 올리기" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "반전이 유용한 것으로 간주되기 위해 필요한 오버행의 수(mm)입니다. 둘레 너비" +#~ "의 %일 수 있습니다.\n" +#~ "값 0은 관계없이 모든 짝수 레이어에서 반전을 활성화합니다." + +#~ msgid "Reverse on odd" +#~ msgstr "홀수에 반전" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "역방향 돌출부 위에 부분이 있는 돌출 둘레홀수 레이어의 방향입니다. 이 교대 " +#~ "패턴은 크게 향상될 수 있습니다.가파른 돌출부.\n" +#~ "\n" +#~ "이 설정은 또한 감소로 인한 부품 뒤틀림을 줄이는 데 도움이 될 수 있습니다." +#~ "부분 벽의 응력." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "내부 경계에만 역방향 경계 논리를 적용합니다.\n" +#~ "\n" +#~ "이 설정은 부품 응력이 이제 분산되어 있으므로 부품 응력을 크게 줄여줍니다." +#~ "교대 방향. 이렇게 하면 부품 뒤틀림도 줄어들고 동시에 외벽 품질 유지. 이 기" +#~ "능은 워프에 매우 유용할 수 있습니다.ABS/ASA와 같은 취약한 소재와 TPU 및 탄" +#~ "성 필라멘트에도 사용 가능실크 PLA. 또한 부동 영역의 뒤틀림을 줄이는 데 도" +#~ "움이 될 수 있습니다.지원합니다.\n" +#~ "\n" +#~ "이 설정을 가장 효과적으로 사용하려면 다음을 설정하는 것이 좋습니다.모든 내" +#~ "부 벽이 교대로 출력되도록 임계값을 0으로 역방향오버행 정도에 관계없이 홀" +#~ "수 레이어의 방향입니다." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "반전이 유용한 것으로 간주되기 위해 필요한 오버행의 수(mm)입니다. 둘레 너비" +#~ "의 %일 수 있습니다.\n" +#~ "값 0은 관계없이 모든 홀수 레이어에서 반전을 활성화합니다." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "위에서 아래를 내려다볼 때 벽 루프가 돌출되는 방향입니다.\n" +#~ "\n" +#~ "홀수에 반전 설정이 활성화되지 않은 경우 기본적으로 모든 벽은 시계 반대 방" +#~ "향으로 출력됩니다. 이것을 Auto 이외의 옵션으로 설정하면 홀수에 반전 설정" +#~ "과 관계없이 벽 방향이 강제됩니다.\n" +#~ "\n" +#~ "나선형 꽃병 모드가 활성화된 경우 이 옵션은 비활성화됩니다." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "객체별 출력시 압출기가 스커트와 충돌할 수 있습니다.\n" +#~ "스커트 레이어를 1로 재설정하여 이를 방지합니다." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "드래프트 쉴드는 바람으로 인해 ABS 또는 ASA 인쇄물이 뒤틀리거나 인쇄 베드에" +#~ "서 분리되는 것을 방지하는 데 유용합니다. 일반적으로 오픈 프레임 프린터, " +#~ "즉 인클로저가 없는 경우에만 필요합니다.\n" +#~ "\n" +#~ "옵션:\n" +#~ "활성화됨 = 스커트가 가장 높은 인쇄물의 높이와 같습니다.\n" +#~ "제한됨 = 스커트가 스커트 높이에 지정된 높이만큼 높습니다.\n" +#~ "\n" +#~ "참고: 드래프트 쉴드가 활성화되면 스커트는 객체로부터 스커트 거리에 인쇄됩" +#~ "니다. 따라서 챙이 활성화된 경우 챙과 교차할 수 있습니다. 이를 방지하려면 " +#~ "스커트 거리 값을 늘리십시오.\n" + +#~ msgid "Limited" +#~ msgstr "제한됨" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "짧고 닫히지 않은 벽이 출력되는 것을 방지하려면 이 값을 조정하십시오. 이로 " +#~ "인해 출력 시간이 늘어날 수 있습니다. 값이 높을수록 더 많은 벽과 긴 벽이 제" +#~ "거됩니다.\n" +#~ "\n" +#~ "참고: 모델 외부의 시각적 틈을 방지하기 위해 하단 및 상단 표면은 이 값의 영" +#~ "향을 받지 않습니다. 상단 표면으로 간주되는 항목의 감도를 조정하려면 아래 " +#~ "고급 설정에서 '벽 하나의 임계값'을 조정하세요. '하나의 벽 임계값'은 이 설" +#~ "정이 기본값인 0.5보다 높게 설정되거나 단일 벽 상단 표면이 활성화된 경우에" +#~ "만 표시됩니다." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "작은 내부 브릿지를 필터링하지 마세요(베타)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "이 옵션은 심하게 기울어지거나 곡선이 있는 모델의 상단 표면이 눌리는 현상" +#~ "을 줄이는 데 도움이 될 수 있습니다.\n" +#~ "\n" +#~ "기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 채우기는 희박한 채우" +#~ "기 위에 직접 출력됩니다. 이는 대부분의 경우에 잘 작동하여 상단 표면 품질" +#~ "을 크게 저하시키지 않고 출력 속도를 높입니다.\n" +#~ "\n" +#~ "그러나 특히 너무 낮은 희박 채우기 밀도가 사용되는 심하게 기울어지거나 곡" +#~ "선 모델에서는 지지되지 않는 고체 채우기가 말려 베개 현상이 발생할 수 있습" +#~ "니다.\n" +#~ "\n" +#~ "이 옵션을 활성화하면 약간 지원되지 않는 내부 솔리드 채우기 위에 내부 브릿" +#~ "지 레이어가 출력됩니다. 아래 옵션은 필터링 양, 즉 생성된 내부 브릿지 양을 " +#~ "제어합니다.\n" +#~ "\n" +#~ "비활성화됨 - 이 옵션을 비활성화합니다. 이는 기본 동작이며 대부분의 경우 " +#~ "잘 작동합니다.\n" +#~ "\n" +#~ "제한된 필터링 - 불필요한 내부 브릿지 생성을 피하면서 크게 기울어진 표면에 " +#~ "내부 브릿지를 생성합니다. 이는 가장 어려운 모델에 적합합니다.\n" +#~ "\n" +#~ "필터링 없음 - 잠재적인 모든 내부 돌출부에 내부 브릿지를 생성합니다. 이 옵" +#~ "션은 심하게 기울어진 상단 표면 모델에 유용합니다. 그러나 대부분의 경우 불" +#~ "필요한 브릿지가 너무 많이 생성됩니다." + +#~ msgid "Shrinkage" +#~ msgstr "수축" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "선택한 표면에 대해 간격 채우기를 활성화합니다. 채워질 최소 간격 길이는 아" +#~ "래의 작은 간격 필터링 옵션에서 제어할 수 있습니다.\n" +#~ "\n" +#~ "옵션:\n" +#~ "1. 어디에서나: 상단, 하단 및 내부 솔리드 표면에 간격 채우기를 적용합니" +#~ "다.\n" +#~ "2. 상단 및 하단 표면: 상단 및 하단 표면에만 간격 채우기를 적용합니다.\n" +#~ "3. 아무데도: 간격 채우기를 비활성화합니다.\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "이 값을 약간(예: 0.9) 줄여 브릿지의 압출량을 줄여 처짐을 개선합니다" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "이 값은 내부 브릿지 레이어의 두께를 결정합니다. 이것은 드문 채우기 위의 " +#~ "첫 번째 레이어입니다. 드문 채우기보다 표면 품질을 향상시키려면 이 값을 약" +#~ "간(예: 0.9) 줄입니다." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "이 값은 상단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다. 부드러운 표" +#~ "면 마감을 위해 약간 줄여도 됩니다" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "이 값은 하단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "꺾여 있는 둘레가 있을 수 있는 영역에서 출력 속도를 낮추려면 이 옵션을 활성" +#~ "화하세요" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "브릿지와 돌출부 벽의 속도" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "내부 브릿지 속도. 값을 백분율로 표시하면 외부 브릿지 속도를 기준으로 계산" +#~ "됩니다. 기본값은 150%입니다." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "필라멘트 교체 시 새 필라멘트를 넣는 시간입니다. 통계에만 사용됩니다" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only" +#~ msgstr "" +#~ "필라멘트를 교체할 때 기존 필라멘트를 빼는 시간입니다. 통계에만 사용됩니다" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 " +#~ "새 필라멘트를 넣는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 " +#~ "시간에 추가됩니다." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 " +#~ "필라멘트를 빼는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 시" +#~ "간에 추가됩니다." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "지정된 임계값보다 작은 간격을 필터링합니다" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "챔버 온도 제어를 위해 이 옵션을 활성화합니다. M191 명령이 " +#~ "\"machine_start_gcode\" 앞에 추가됩니다.\n" +#~ "G코드 명령: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "챔버 온도가 높을수록 뒤틀림을 억제하거나 줄이는 데 도움이 될 수 있으며 잠" +#~ "재적으로 ABS, ASA, PC, PA 등과 같은 고온 재료의 층간 결합 강도가 높아질 " +#~ "수 있습니다. 동시에 ABS 및 ASA의 공기 여과는 더욱 악화됩니다. PLA, PETG, " +#~ "TPU, PVA 및 기타 저온 재료의 경우 막힘을 방지하려면 실제 챔버 온도가 높지 " +#~ "않아야 하므로 꺼짐을 의미하는 0을 적극 권장합니다" + #~ msgid "" #~ "Different nozzle diameters and different filament diameters is not " #~ "allowed when prime tower is enabled." @@ -16600,13 +21824,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "유효한 값을 입력하세요(K는 0~0.3, N은 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "연결된 프린터 선택(0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "연결된 프린터 (%d/6)를 선택합니다" - #~ msgid "PrintingPause" #~ msgstr "인쇄 일시 중지" @@ -16633,9 +21850,9 @@ msgstr "" #~ "may cause the result not exactly the same in each calibration. We are " #~ "still investigating the root cause to do improvements with new updates." #~ msgstr "" -#~ "우리 위키에서 동적 유량 교정에 대한 자세한 내용을 찾아보세요.\n" +#~ "우리 위키에서 동적 압출량 교정에 대한 자세한 내용을 찾아보세요.\n" #~ "\n" -#~ "일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 유량 교정" +#~ "일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 압출량 교정" #~ "\" 옵션을 선택한 상태에서 단일 색상/재료 출력을 시작하면 프린터는 이전 방" #~ "식을 따르며 출력 전에 필라멘트를 교정합니다. 다중 색상/재료 출력을 시작하" #~ "면 프린터는 모든 필라멘트 전환 중에 필라멘트에 대한 기본 보상 매개변수를 " @@ -16668,18 +21885,12 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "완벽한 압출각도를 가진 모서리를 찾아주세요" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " #~ "first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " #~ "push out the printed walls where it is attached to them, resulting in a " #~ "worse external surface finish. It can also cause the infill to shine " #~ "through the external surfaces of the part." @@ -16692,16 +21903,13 @@ msgstr "" #~ "어 외부 표면 마감이 더 나빠집니다. 또한 충전재가 부품의 외부 표면을 통해 " #~ "빛날 수도 있습니다." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca는 Prusa Research의 PrusaSlicer에서 나온 뱀부랩의 BambuStudio" -#~ "를 기반으로 합니다. PrusaSlicer는 Alessandro Ranellucci와 RepRap 커뮤니티" +#~ "를 기반으로 합니다. PrusaSlicer는 Alessandro Ranellucci와 RepRap 커뮤니티" #~ "의 Slic3r에서 제작되었습니다" #~ msgid "Export &Configs" @@ -16737,37 +21945,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "필라멘트 언로드" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "AMS 슬롯을 선택한 후 \"넣기\" 또는 \"빼기\" 버튼을 눌러 필라멘트를 자동으" -#~ "로 넣거나 뺍니다." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "메인보드" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- ℃" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "active" #~ msgstr "활성화" @@ -16805,7 +21985,7 @@ msgstr "" #~ "이 시간 동안 표시기가 챔버를 정확하게 나타내지 못할 수 있습니다." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "참고: 출력 중에 새 필라멘트를 삽입하면 출력이 완료될 때까지 AMS가 자동으" @@ -16850,12 +22030,9 @@ msgstr "" #~ msgid "Load failed [%d]" #~ msgstr "로드 실패 [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "프린터에서 모델 정보를 가져오지 못했습니다." -#~ msgid "Failed to parse model infomations." -#~ msgstr "모델 정보를 해석하지 못했습니다." - #~ msgid "Connection lost. Please retry." #~ msgstr "연결이 끊어졌습니다. 다시 시도해 주세요." @@ -16864,7 +22041,7 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16872,7 +22049,7 @@ msgstr "" #~ "사전 설정 전환 후 변경된 설정(새 값)을 유지하시겠습니까?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16955,10 +22132,10 @@ msgstr "" #~ "대체 추가 벽은 수직 쉘 두께 보장을 비활성화한 상태에서만 작동합니다. " #~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " #~ "wall\n" -#~ "No - Dont use alternate extra wall" +#~ "No - Don't use alternate extra wall" #~ msgstr "" #~ "이 설정을 자동으로 변경하시겠습니까?\n" #~ "예 - 수직 쉘 두께 확인을 비활성화하고 대체 추가 벽을 활성화합니다.\n" @@ -16971,9 +22148,6 @@ msgstr "" #~ "경사진 표면 근처에 꽉찬 내부 채우기를 추가하여 수직 쉘 두께를 보장합니다 " #~ "(상단+하단 꽉찬 레이어)" -#~ msgid " " -#~ msgstr " " - #~ msgid "Text-Rotate" #~ msgstr "텍스트 회전" @@ -16986,13 +22160,6 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "다음으로 업데이트된 구성 패키지 " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 " -#~ "향상시킵니다." - #~ msgid "" #~ "The minimum printing speed for the filament when slow down for better " #~ "layer cooling is enabled, when printing overhangs and when feature speeds " @@ -17001,37 +22168,20 @@ msgstr "" #~ "보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으" #~ "로 지정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "드문 레이어 없음(실험적)" - #~ msgid "" #~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" +#~ "\".\n" #~ "To add preset for more prinetrs, Please go to printer selection" #~ msgstr "" #~ "사전 설정의 이름을 \"선택한 공급업체 유형 직렬 @프린터\"로 변경합니다.\n" #~ "더 많은 프린터에 대한 사전 설정을 추가하려면 프린터 선택으로 이동하세요" -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "구성을 로드할 수 없습니다." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "이 3mf는 이전 Snapmaker Orca에서 생성되었으며, 형상 데이터만 로드합니다." - #~ msgid "wiki" #~ msgstr "위키" -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "상대적 압출은 \"label_objects\" 옵션(기타; 개체 이름표)을 사용할 때 권장됩" -#~ "니다. 일부 압출기는 이 옵션을 해제하면 더 잘 작동합니다(절대 압출 모드). " -#~ "닦기 타워는 상대 모드에서만 호환됩니다" - #~ msgid "Movement:" #~ msgstr "이동:" @@ -17054,13 +22204,13 @@ msgstr "" #~ msgstr "커넥터가 잘라내기 윤곽을 벗어났습니다" #~ msgid "connector is out of object" -#~ msgstr "커넥터가 개체에서 벗어났습니다" +#~ msgstr "커넥터가 객체에서 벗어났습니다" #~ msgid "connectors is out of object" -#~ msgstr "커넥터가 개체에서 벗어났습니다" +#~ msgstr "커넥터가 객체에서 벗어났습니다" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" #~ "잘못된 상태입니다.\n" @@ -17070,7 +22220,7 @@ msgstr "" #~ msgstr "다시계산" #~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " +#~ "Orca recalculates your flushing volumes every time the filament colors " #~ "change. You can change this behavior in Preferences." #~ msgstr "" #~ "Snapmaker Orca는 필라멘트 색상이 바뀔 때마다 플러싱 볼륨을 다시 계산합니다. " @@ -17083,7 +22233,7 @@ msgstr "" #~ "프린터가 인쇄 작업을 수신하는 동안 시간이 초과되었습니다.네트워크가 제대" #~ "로 작동하는지 확인하고 인쇄를 다시 보내십시오." -#~ msgid "The beginning of the vendor can not be a number. Please re-enter." +#~ msgid "The beginning of the vendor cannot be a number. Please re-enter." #~ msgstr "공급업체의 시작 부분은 숫자일 수 없습니다. 다시 입력해 주세요." #~ msgid "Edit Text" @@ -17098,9 +22248,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "SLA 압축파일 선택:" -#~ msgid "Import file" -#~ msgstr "파일 가져오기" - #~ msgid "Import model and profile" #~ msgstr "모델과 파일 가져오기" @@ -17168,13 +22315,13 @@ msgstr "" #~ "예 - 자동으로 직선 패턴으로 전환합니다\n" #~ "아니요 - 밀도를 기본값(100%가 아닌 값)으로 자동 재설정합니다" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "필라멘트를 로드하기 전에 노즐을 170도 이상으로 가열하십시오." -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "G코드 창 표시" -#~ msgid "If enabled, g-code window will be displayed." +#~ msgid "If enabled, G-code window will be displayed." #~ msgstr "활성화된 경우 G코드 창이 표시됩니다." #, c-format @@ -17183,18 +22330,15 @@ msgstr "" #~ "내부 드문 내부 채우기 밀도, 100은 전체가 꽉찬 내부 채우기임을 의미합니다" #~ msgid "Tree support wall loops" -#~ msgstr "나무 지지대 벽 루프" +#~ msgstr "트리 서포트 벽 루프" #~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "이 설정은 나무 지지대의 벽 수를 지정합니다" +#~ msgstr "이 설정은 트리 서포트의 벽 수를 지정합니다" #, c-format, boost-format #~ msgid " doesn't work at 100%% density " #~ msgstr " 100%% 밀도에서 작동하지 않음 " -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "바닥면 선택 도구" @@ -17211,9 +22355,9 @@ msgstr "" #~ msgstr "올바른 값을 입력하십시오 (K: 0~0.5, N: 0.6~2.0)" #~ msgid "Export all objects as STL" -#~ msgstr "모든 개체를 STL로 내보내기" +#~ msgstr "모든 객체를 STL로 내보내기" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "이 3mf는 호환되지 않습니다. 형상 데이터만 로드합니다!" #~ msgid "Incompatible 3mf" @@ -17226,7 +22370,7 @@ msgstr "" #~ "When print by object, machines with I3 structure will not generate " #~ "timelapse videos." #~ msgstr "" -#~ "개체별로 출력할 때 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." +#~ "객체별로 출력할 때 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." #, c-format, boost-format #~ msgid "%s is not supported by AMS." @@ -17271,160 +22415,11 @@ msgstr "" #~ msgid "%%" #~ msgstr "%%" -#~ msgid "Export 3MF" -#~ msgstr "3MF 내보내기" - -#~ msgid "Export project as 3MF." -#~ msgstr "프로젝트를 3MF로 내보내기." - -#~ msgid "Export slicing data" -#~ msgstr "슬라이싱 데이터 내보내기" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "슬라이싱 데이터 폴더로 내보내기." - -#~ msgid "Load slicing data" -#~ msgstr "슬라이싱 데이터 로드" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "디렉토리에 캐시된 슬라이싱 데이터 로드" - -#~ msgid "Export STL" -#~ msgstr "STL 내보내기" - #~ msgid "Export the objects as multiple STL." -#~ msgstr "개체를 여러개의 STL로 내보내기." - -#~ msgid "Slice" -#~ msgstr "슬라이스" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "플레이트 슬라이스: 0-모든 플레이트, i-플레이트 i, 기타-잘못됨" - -#~ msgid "Show command help." -#~ msgstr "명령 도움말을 표시합니다." - -#~ msgid "UpToDate" -#~ msgstr "최신 정보" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "3mf의 구성 값을 최신으로 업데이트합니다." - -#~ msgid "Load default filaments" -#~ msgstr "기본 필라멘트 로드" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "로드되지 않은 경우 기본값으로 첫 번째 필라멘트 로드" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "슬라이싱을 위한 플레이트당 최대 삼각형 개수." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "플레이트당 최대 슬라이싱 시간(초)" - -#~ msgid "Normative check" -#~ msgstr "표준 검사" - -#~ msgid "Check the normative items." -#~ msgstr "표준 항목을 확인합니다." - -#~ msgid "Output Model Info" -#~ msgstr "모델 정보 출력" - -#~ msgid "Output the model's information." -#~ msgstr "모델 정보를 출력합니다." - -#~ msgid "Export Settings" -#~ msgstr "설정 내보내기" - -#~ msgid "Export settings to a file." -#~ msgstr "설정을 파일로 내보내기." - -#~ msgid "Send progress to pipe" -#~ msgstr "진행 상황을 파이프로 보내기" - -#~ msgid "Send progress to pipe." -#~ msgstr "진행 상황을 파이프로 보내기." - -#~ msgid "Arrange Options" -#~ msgstr "정렬 옵션" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "정렬 옵션: 0-사용 안 함, 1-사용, 기타-자동" - -#~ msgid "Repetions count" -#~ msgstr "반복 횟수" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "전체 모델의 반복 횟수" - -#~ msgid "Convert Unit" -#~ msgstr "단위 변환" - -#~ msgid "Convert the units of model" -#~ msgstr "모델의 단위를 변환" - -#~ msgid "Rotate around X" -#~ msgstr "X를 중심으로 회전" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "X축을 중심으로 한 회전 각도입니다." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "부동 소수점 계수로 모델 크기 조정" - -#~ msgid "Load General Settings" -#~ msgstr "일반 설정 로드" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "지정된 파일에서 프로세스/기계 설정 로드" - -#~ msgid "Load Filament Settings" -#~ msgstr "필라멘트 설정 로드" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "지정된 파일 목록에서 필라멘트 설정 불러오기" - -#~ msgid "Skip Objects" -#~ msgstr "개체 건너뛰기" - -#~ msgid "Skip some objects in this print" -#~ msgstr "이 출력에서 일부 개체를 건너뜁니다" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "uptodate 사용 시 최신 프로세스/프린터 설정 로드" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "uptodate를 사용할 때 지정된 파일에서 최신 프로세스/프린터 설정을 로드합니" -#~ "다" - -#~ msgid "Output directory" -#~ msgstr "출력 디렉토리" - -#~ msgid "Output directory for the exported files." -#~ msgstr "내보내기 파일의 출력 디렉토리입니다." - -#~ msgid "Debug level" -#~ msgstr "디버그 수준" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "디버그 로깅 수준을 설정합니다. 0:치명적, 1:오류, 2:경고, 3:정보, 4:디버" -#~ "그, 5:추적\n" +#~ msgstr "객체를 여러개의 STL로 내보내기." #, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "선택한 사전 설정: %1%을(를) 찾을 수 없습니다." #~ msgid "" @@ -17433,35 +22428,15 @@ msgstr "" #~ "touchpanel in the 3D scene?" #~ msgstr "" #~ "3D 화면 작업\n" -#~ "3D 화면에서 마우스와 터치패널로 보기 및 개체/부품 선택을 제어하는 방법을 " +#~ "3D 화면에서 마우스와 터치패널로 보기 및 객체/부품 선택을 제어하는 방법을 " #~ "알고 있습니까?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "모델 수리\n" -#~ "많은 슬라이싱 문제를 피하기 위해 손상된 3D 모델을 수리할 수 있다는 것을 알" -#~ "고 있습니까?" - -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "프린터 도어를 열어 놓은 상태로 출력해야 하는 경우\n" -#~ "더 높은 내부 온도로 낮은 온도의 필라멘트를 출력할 때 프린터 도어를 열면 압" -#~ "출기/핫엔드가 막힐 가능성을 줄일 수 있습니다. 이에 대한 자세한 내용은 Wiki" -#~ "에서 확인하세요." - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "매입" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "Snapmaker Orca 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 " #~ "다시 시도하십시오." @@ -17477,7 +22452,7 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" +#~ "automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same " #~ "brand, material type, and color)" #~ msgstr "" @@ -17545,14 +22520,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "압출 교정" -#~ msgid "Push new filament into the extruder" -#~ msgstr "새 필라멘트를 압출기에 밀어 넣으세요" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "다른 레이어의 베드 온도가 초기 레이어의 베드 온도보다 %d°C 이상 낮습니" #~ "다.\n" @@ -17598,32 +22570,27 @@ msgstr "" #~ msgstr "고온 플레이트" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "고온 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 고온 플레이트에 출력하" #~ "는 것을 지원하지 않음을 의미합니다" #~ msgid "Internal bridge support thickness" -#~ msgstr "내부 다리 지지대 두께" +#~ msgstr "내부 다리 서포트 두께" #~ msgid "" #~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " +#~ "internal bridges. These support loops could prevent internal bridges from " #~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" +#~ "when the sparse infill density is low. This value determines the " +#~ "thickness of the support loops. 0 means disable this feature" #~ msgstr "" -#~ "활성화된 경우 내부 다리의 윤곽선 아래에 지지대 루프를 생성합니다. 이러한 " -#~ "지지대 루프는 내부 다리를 공중에서 압출하는 것을 방지하고, 특히 드문 채우" -#~ "기 밀도가 낮을 때 상단 표면 품질을 향상시킬 수 있습니다. 이 값은 지지대 루" +#~ "활성화된 경우 내부 다리의 윤곽선 아래에 서포트 루프를 생성합니다. 이러한 " +#~ "서포트 루프는 내부 다리를 공중에서 압출하는 것을 방지하고, 특히 드문 채우" +#~ "기 밀도가 낮을 때 상단 표면 품질을 향상시킬 수 있습니다. 이 값은 서포트 루" #~ "프의 두께를 결정하며 0은 이 기능을 사용하지 않음을 의미합니다" -#, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "Klipper의 max_accel_to_decel이 이 가속도 % o로 조정됩니다" - #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " #~ "supports into a regular grid will create more stable supports (default), " @@ -17632,9 +22599,9 @@ msgstr "" #~ "save a lot of material (default), while hybrid style will create similar " #~ "structure to normal support under large flat overhangs." #~ msgstr "" -#~ "지지대의 모양. 일반 지지대의 경우, 격자는 보다 안정적인 지지대(기본값)가 " -#~ "생성되는 반면 맞춤 지지대는 재료를 절약하고 개체 자국을 줄입니다.\n" -#~ "나무 지지대의 경우 얇은 모양은 가지를 더 적극적으로 병합하고 많은 재료를 " +#~ "서포트의 모양. 일반 서포트의 경우, 격자는 보다 안정적인 서포트(기본값)가 " +#~ "생성되는 반면 맞춤 서포트는 재료를 절약하고 객체 자국을 줄입니다.\n" +#~ "트리 서포트의 경우 얇은 모양은 가지를 더 적극적으로 병합하고 많은 재료를 " #~ "절약합니다(기본값). 반면 혼합 스타일은 크고 평평한 오버행 아래에 일반 지지" #~ "대와 유사한 구조를 만듭니다." @@ -17659,7 +22626,7 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "유효한 값을 입력하십시오:\n" #~ "시작 > 0 단계 >= 0\n" @@ -17668,8 +22635,8 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "유효한 값을 입력하십시오:\n" #~ "시작 > 10 단계 >= 0\n" -#~ "끝 > 시작 + 단계)" +#~ "끝 > 시작 + 단계)" \ No newline at end of file diff --git a/localization/i18n/lt/Snapmaker_Orca_It.po b/localization/i18n/lt/Snapmaker_Orca_It.po index 241f7c8c96..905c386ebb 100644 --- a/localization/i18n/lt/Snapmaker_Orca_It.po +++ b/localization/i18n/lt/Snapmaker_Orca_It.po @@ -1,877 +1,1018 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. # +#, fuzzy msgid "" msgstr "" -"Project-Id-Version: Snapmaker Orca\n" +"Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: \n" -"Last-Translator: \n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-10-25 23:01+0300\n" +"Last-Translator: Gintaras Kučinskas \n" "Language-Team: \n" -"Language: it\n" +"Language: lt_LT\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" -"X-Generator: Poedit 3.4.2\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && (n%100<11 || n%100>19) ? 0 : n" +"%10>=2 && n%10<=9 && (n%100<11 || n%100>19) ? 1 : 2);\n" +"X-Generator: Poedit 3.6\n" -msgid "Supports Painting" -msgstr "Pittura Supporti" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + Rotella del mouse" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "AMS nepalaiko TPU." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Drėgnas PVA taps lankstus ir gali įstrigti AMS. Prieš naudojimą būtinai jį " +"išdžiovinkite." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Pastaba: CF/GF gijos yra kietos ir trapios. Jas lengva nulaužti arba jos " +"gali įstrigti AMS. Naudokite atsargiai." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Dabartinė AMS drėgmė" + +msgid "Humidity" +msgstr "Drėgmė" + +msgid "Temperature" +msgstr "Temperatūra" + +msgid "Left Time" +msgstr "Likęs laikas" + +msgid "Drying" +msgstr "Džiovinimas" + +msgid "Idle" +msgstr "Tuščias" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Serijinis:" + +msgid "Version:" +msgstr "Versija:" + +msgid "Latest version" +msgstr "Paskutinė versija" + +msgid "Support Painting" +msgstr "Palaiko piešimą" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Pelės ratukas" msgid "Section view" -msgstr "Vista in sezione" +msgstr "Sekcijų peržiūra" msgid "Reset direction" -msgstr "Ripristina direzione" - -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Rotella del mouse" +msgstr "Atstatyti kryptį" msgid "Pen size" -msgstr "Dimensione penna" +msgstr "Pieštuko dydis" msgid "Left mouse button" -msgstr "Tasto sinistro mouse" +msgstr "Kairys pelės mygtukas" msgid "Enforce supports" -msgstr "Rinforzi supporti" +msgstr "Priverstinės atramos" msgid "Right mouse button" -msgstr "Tasto destro mouse" +msgstr "Dešinys pelės mygtukas" msgid "Block supports" -msgstr "Blocca supporti" - -msgid "Shift + Left mouse button" -msgstr "Shift + Tasto sinistro mouse" +msgstr "Blokuoti atramas" msgid "Erase" -msgstr "Elimina" +msgstr "Ištrinti" msgid "Erase all painting" -msgstr "Cancellare tutta la pittura" +msgstr "Ištrinti visą piešinį" msgid "Highlight overhang areas" -msgstr "Evidenziare le sporgenze" +msgstr "Paryškinti kabančias vietas" msgid "Gap fill" -msgstr "Riempimento gap" +msgstr "Plyšių užpildymas" msgid "Perform" -msgstr "Eseguire" +msgstr "Atlikti" msgid "Gap area" -msgstr "Area Gap" +msgstr "Plyšio vieta" msgid "Tool type" -msgstr "Tipo di strumento" +msgstr "Įrankio tipas" msgid "Smart fill angle" -msgstr "Angolo riempimento intelligente" +msgstr "Išmanaus užpildymo kampas" msgid "On overhangs only" -msgstr "Solo sulle sporgenze" +msgstr "Tik kabantiems" msgid "Auto support threshold angle: " -msgstr "Angolo di soglia per supporto automatico: " +msgstr "Automatinių atramų generavimo kampas: " msgid "Circle" -msgstr "Cerchio" +msgstr "Apskritimas" msgid "Sphere" msgstr "Sfera" msgid "Fill" -msgstr "Riempi" +msgstr "Užpildymas" msgid "Gap Fill" -msgstr "Riempimento gap" +msgstr "Plyšių užpildymas" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Consente di pitturare solo sulle sfaccettature selezionate da: \"%1%\"" +msgstr "Leidžia piešti tik tuos aspektus, kuriuos pasirinko: „%1%“" msgid "Highlight faces according to overhang angle." -msgstr "Evidenziare le facce in base all'angolo di sporgenza." +msgstr "Paryškinti paviršius pagal iškyšos kampą." msgid "No auto support" -msgstr "Nessun supporto automatico" +msgstr "Nenaudoti automatinių atramų" msgid "Support Generated" -msgstr "Supporto generato" +msgstr "Atramos sugeneruotos" msgid "Gizmo-Place on Face" -msgstr "Gizmo-Posiziona su faccia" +msgstr "Gizmo-Patalpinti ant paviršiaus" msgid "Lay on face" -msgstr "Posiziona su faccia" +msgstr "Paguldyti ant paviršiaus" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" -"Il numero di filamenti supera il numero massimo supportato dallo strumento " -"di pittura. Solo il primo %1% dei filamenti sarà disponibile nello strumento " -"di pittura." +"Gijų skaičius viršija didžiausią palaikomą piešimo įrankio. Piešimo įrankyje " +"bus pasiekiami tik pirmosios %1% gijos." msgid "Color Painting" -msgstr "Pittura a colori" +msgstr "Spalvotas piešimas" msgid "Pen shape" -msgstr "Forma penna" +msgstr "Rašiklio forma" msgid "Paint" -msgstr "Pittura" +msgstr "Piešti" msgid "Key 1~9" -msgstr "Tasto 1~9" +msgstr "Klavišai 1~9" msgid "Choose filament" -msgstr "Scegli filamento" +msgstr "Pasirinkite giją" msgid "Edge detection" -msgstr "Rilevamento dei bordi" +msgstr "Briaunų aptikimas" msgid "Triangles" -msgstr "Triangoli" +msgstr "Trikampiai" msgid "Filaments" -msgstr "Filamenti" +msgstr "Gijos" msgid "Brush" -msgstr "Pennello" +msgstr "Teptukas" msgid "Smart fill" -msgstr "Riempimento intelligente" +msgstr "Išmanus užpildymas" msgid "Bucket fill" -msgstr "Riempimento Secchio" +msgstr "Kibiro užpildymas" msgid "Height range" -msgstr "Intervallo altezza" +msgstr "Aukščio diapazonas" -msgid "Alt + Shift + Enter" -msgstr "Alt + Maiusc + Invio" +msgid "Enter" +msgstr "Įvesti" msgid "Toggle Wireframe" -msgstr "Attiva Wireframe" +msgstr "Perjungti \"vielinį\" vaizdą" + +msgid "Remap filaments" +msgstr "Perplanuoti gijas" + +msgid "Remap" +msgstr "Perplanuoti" + +msgid "Cancel" +msgstr "Atšaukti" msgid "Shortcut Key " -msgstr "Shortcut Key " +msgstr "Spartusis klavišas " msgid "Triangle" -msgstr "Triangolo" +msgstr "Trikampis" msgid "Height Range" -msgstr "Interv. altezza" +msgstr "Aukščio diapazonas" msgid "Vertical" -msgstr "Verticale" +msgstr "Vertikaliai" msgid "Horizontal" -msgstr "Orizzontale" +msgstr "Horizontaliai" msgid "Remove painted color" -msgstr "Rimuovi colore dipinto" +msgstr "Pašalinti dažytą spalvą" #, boost-format msgid "Painted using: Filament %1%" -msgstr "Pitturato utilizzando: Filamento %1%" +msgstr "Piešta naudojant: Gija %1%" + +msgid "Filament remapping finished." +msgstr "Gijų perplanavimas baigtas." + +msgid "Paint-on fuzzy skin" +msgstr "Piešti grublėtą paviršių" + +msgid "Brush size" +msgstr "Teptuko dydis" + +msgid "Brush shape" +msgstr "Teptuko forma" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" msgid "Move" -msgstr "Sposta" +msgstr "Perkelti" + +msgid "Please select at least one object." +msgstr "Pasirinkite bent vieną objektą." msgid "Gizmo-Move" -msgstr "Gizmo-Sposta" +msgstr "Gizmo-Judėjimas" msgid "Rotate" -msgstr "Ruota" +msgstr "Pasukti" msgid "Gizmo-Rotate" -msgstr "Gizmo-Ruota" +msgstr "Gizmo-Pasukimas" msgid "Optimize orientation" -msgstr "Ottimizza orientamento" +msgstr "Optimizuoti orientaciją" msgid "Apply" -msgstr "Applica" +msgstr "Taikyti" msgid "Scale" -msgstr "Ridimensiona" +msgstr "Mastelis" msgid "Gizmo-Scale" -msgstr "Gizmo-Ridimensiona" +msgstr "Gizmo-Skalė" msgid "Error: Please close all toolbar menus first" -msgstr "Errore: chiudi prima tutti i menu della barra degli strumenti" +msgstr "Klaida: Prašome pirmiau uždaryti visus įrankių juostos meniu" msgid "in" -msgstr "in" +msgstr "" msgid "mm" msgstr "mm" -msgid "Position" -msgstr "Posizione" +msgid "Part selection" +msgstr "Detalių pasirinkimas" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotazione" +msgid "Fixed step drag" +msgstr "Vilkimas fiksuotu žingsniu" + +msgid "Single sided scaling" +msgstr "Vienpusis mastelio keitimas" + +msgid "Position" +msgstr "Padėtis" + +msgid "Rotate (relative)" +msgstr "Pasukti (santykinai)" msgid "Scale ratios" -msgstr "Rapporti di scala" +msgstr "Mastelis" msgid "Object Operations" -msgstr "Operazioni sugli oggetti" +msgstr "Objekto veiksmai" msgid "Volume Operations" -msgstr "Operazioni volume" +msgstr "Tūrio veiksmai" msgid "Translate" -msgstr "Traduci" +msgstr "Išversti" msgid "Group Operations" -msgstr "Operazioni Gruppo" - -msgid "Set Position" -msgstr "Imposta posizione" +msgstr "Grupės veiksmai" msgid "Set Orientation" -msgstr "Imposta orientamento" +msgstr "Nustatyti orientaciją" msgid "Set Scale" -msgstr "Imposta scala" +msgstr "Nustatyti mastelį" msgid "Reset Position" -msgstr "Ripristina posizione" +msgstr "Atstatyti padėtį" msgid "Reset Rotation" -msgstr "Reimposta rotazione" - -msgid "World coordinates" -msgstr "Coordinate reali" +msgstr "Iš naujo nustatyti pasukimą" msgid "Object coordinates" -msgstr "Coordinate oggetto" +msgstr "Objekto koordinatės" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Pasaulio koordinatės" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" +"Atkurti dabartinį pasukimą iki vertės, buvusios atidarius pasukimo įrankį." + +msgid "Rotate (absolute)" +msgstr "Pasukti (absoliučiai)" + +msgid "Reset current rotation to real zeros." +msgstr "Atstatyti dabartinį sukimąsi į tikrąsias nulines vertes." + +msgid "Part coordinates" +msgstr "Detalės koordinatės" #. TRN - Input label. Be short as possible msgid "Size" -msgstr "Dimensioni" - -msgid "%" -msgstr "%" +msgstr "Dydis" msgid "uniform scale" -msgstr "Scala uniforme" +msgstr "vienoda skalė" msgid "Planar" -msgstr "Planare" +msgstr "Planarinis" msgid "Dovetail" -msgstr "A coda di rondine" +msgstr "Šakinis sujungimas" msgid "Auto" -msgstr "Auto" +msgstr "Automatiškai" msgid "Manual" -msgstr "Manuale" +msgstr "Rankiniu būdu" msgid "Plug" -msgstr "Connettore" +msgstr "Kištukas" msgid "Dowel" -msgstr "Tassello" +msgstr "Kaištis" msgid "Snap" -msgstr "Snap" +msgstr "Snapelis" msgid "Prism" -msgstr "Prisma" +msgstr "Prizmė" msgid "Frustum" -msgstr "Tronco" +msgstr "Nukirsta piramidė" msgid "Square" -msgstr "Quadrato" +msgstr "Kvadratas" msgid "Hexagon" -msgstr "Esagono" +msgstr "Šešiakampis" msgid "Keep orientation" -msgstr "Mantieni orientamento" +msgstr "Išlaikyti padėtį" msgid "Place on cut" -msgstr "Posiziona sul taglio" +msgstr "Padėti ant pjūvio" msgid "Flip upside down" -msgstr "Capovolgi" +msgstr "Apversti aukštyn kojom" msgid "Connectors" -msgstr "Connettori" +msgstr "Jungtys" msgid "Type" -msgstr "Tipo" +msgstr "Tipas" msgid "Style" -msgstr "Stile" +msgstr "Stilius" msgid "Shape" -msgstr "Forma" +msgstr "Figūra" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" -msgstr "Profondità" +msgstr "Gyliai" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Pasukimas" msgid "Groove" -msgstr "Scanalatura" +msgstr "Griovelis" msgid "Width" -msgstr "Larghezza" +msgstr "Plotis" msgid "Flap Angle" -msgstr "Inverti Angolo" +msgstr "Atvertimo kampas" msgid "Groove Angle" -msgstr "Angolo Scanalatura" +msgstr "Griovelio kampas" msgid "Part" -msgstr "Parte" +msgstr "Dalis" msgid "Object" -msgstr "Oggetto" +msgstr "Objektas" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" -"Clicca per capovolgere il piano di taglio\n" -"Trascina per spostare il piano di taglio" +"Paspauskite, norėdami apversti pjūvio plokštumą\n" +"Vilkite, norėdami perkelti pjūvio plokštumą" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" -"Clicca per capovolgere il piano di taglio\n" -"Trascina per spostare il piano di taglio\n" -"Clicca con il tasto destro del mouse su una parte per assegnarla all'altro " -"lato" +"Paspauskite, norėdami apversti pjūvio plokštumą\n" +"Vilkite, norėdami perkelti pjūvio plokštumą\n" +"Dešiniuoju pelės mygtuku spustelėkite dalį, kad ją priskirtumėte kitai pusei" msgid "Move cut plane" -msgstr "Sposta il piano di taglio" +msgstr "Perkelti pjūvio plokštumą" msgid "Mode" -msgstr "Modalità" +msgstr "Režimas" msgid "Change cut mode" -msgstr "Cambia la modalità di taglio" +msgstr "Keisti pjūvio režimą" msgid "Tolerance" -msgstr "Tolleranza" +msgstr "Paklaidos" msgid "Drag" -msgstr "Trascina" +msgstr "Vilkti" msgid "Draw cut line" -msgstr "Disegna linea di taglio" +msgstr "Brėžti pjūvio liniją" msgid "Left click" -msgstr "Click sinistro" +msgstr "Kairysis spustelėjimas" msgid "Add connector" -msgstr "Aggiungi connettore" +msgstr "Įtraukti jungtį" msgid "Right click" -msgstr "Clic destro" +msgstr "Spustelėti dešinįjį pelės mygtuką" msgid "Remove connector" -msgstr "Rimuovi connettore" +msgstr "Pašalinti jungtį" msgid "Move connector" -msgstr "Sposta connettore" +msgstr "Perkelti jungtį" msgid "Add connector to selection" -msgstr "Aggiungi connettore alla selezione" +msgstr "Įtraukti jungtį į pasirinktą" msgid "Remove connector from selection" -msgstr "Rimuovi connettore dalla selezione" +msgstr "Pašalinti jungtį iš pasirinkto" msgid "Select all connectors" -msgstr "Seleziona tutti i connettori" +msgstr "Pasirinkti visas jungtis" msgid "Cut" -msgstr "Taglia" +msgstr "Pjauti" msgid "Rotate cut plane" -msgstr "Ruota il piano di taglio" +msgstr "Sukti pjovimo plokštumą" msgid "Remove connectors" -msgstr "Rimuovi connettori" +msgstr "Pašalinti jungtis" msgid "Bulge" -msgstr "Rigonfiamento" +msgstr "Iškilimas" msgid "Bulge proportion related to radius" -msgstr "Proporzione del rigonfiamento in relazione al raggio" +msgstr "Iškilimo proporcija spindulio atžvilgiu" msgid "Space" -msgstr "Spazio" +msgstr "Tarpas" msgid "Space proportion related to radius" -msgstr "Proporzione di spazio in relazione al raggio" +msgstr "Tarpo proporcija spindulio atžvilgiu" msgid "Confirm connectors" -msgstr "Conferma connettori" - -msgid "Cancel" -msgstr "Annulla" +msgstr "Patvirtinti jungtis" msgid "Build Volume" -msgstr "Volume di stampa" +msgstr "Spausdinimo tūris" msgid "Flip cut plane" -msgstr "Capovolgi piano di taglio" +msgstr "Apversti pjovimo plokštumą" msgid "Groove change" -msgstr "Cambio di scanalatura" +msgstr "Griovelio kaita" msgid "Reset" -msgstr "Reimposta" +msgstr "Nustatyti iš naujo" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" -msgstr "Modificato" +msgstr "Taisyta" msgid "Cut position" -msgstr "Posizione taglio" +msgstr "Pjovimo vieta" msgid "Reset cutting plane" -msgstr "Ripristina piano di taglio" +msgstr "Atstatyti pjovimo plokštumą" msgid "Edit connectors" -msgstr "Modifica connettori" +msgstr "Taisyti jungtis" msgid "Add connectors" -msgstr "Aggiungi connettori" +msgstr "Įtraukti jungtis" msgid "Reset cut" -msgstr "Ripristina taglio" +msgstr "Atstatyti pjovimą" msgid "Reset cutting plane and remove connectors" -msgstr "Ripristina il piano di taglio e rimuovi i connettori" +msgstr "Atstatyti pjovimo plokštumą ir pašalinti jungtis" msgid "Upper part" -msgstr "Parte superiore" +msgstr "Viršutinė dalis" msgid "Lower part" -msgstr "Parte inferiore" +msgstr "Apatinė dalis" msgid "Keep" -msgstr "Mantieni" +msgstr "Laikyti" msgid "Flip" -msgstr "Ribalta" +msgstr "Apversti" msgid "After cut" -msgstr "Dopo il taglio" +msgstr "Po pjovimo" msgid "Cut to parts" -msgstr "Taglia le parti" +msgstr "Supjaustyti į dalis" msgid "Perform cut" -msgstr "Effettua taglio" +msgstr "Atlikti pjūvį" msgid "Warning" -msgstr "Attenzione" +msgstr "Įspėjimas" msgid "Invalid connectors detected" -msgstr "Rilevati connettori non validi" +msgstr "Nustatytos netinkamos jungtys" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "%1$d connettore è fuori dal profilo di taglio" -msgstr[1] "%1$d connettori sono fuori dal profilo di taglio" +msgstr[0] "%1$d jungtis išeina už pjovimo kontūro" +msgstr[1] "%1$d jungtys išeina už pjovimo kontūro" +msgstr[2] "%1$d jungčių išeina už pjovimo kontūro" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" -msgstr[0] "%1$d connettore è fuori dall'oggetto" -msgstr[1] "%1$d connettori sono fuori dall'oggetto" +msgstr[0] "%1$d jungtis yra už objekto ribų" +msgstr[1] "%1$d jungtys yra už objekto ribų" +msgstr[2] "%1$d jungčių yra už objekto ribų" msgid "Some connectors are overlapped" -msgstr "Alcuni connettori si sovrappongono" +msgstr "Kai kurios jungtys persidengia" msgid "Select at least one object to keep after cutting." -msgstr "Selezionare almeno un oggetto da conservare dopo il taglio." +msgstr "Pasirinkite bent vieną objektą, kurį norite išlaikyti po pjūvio." msgid "Cut plane is placed out of object" -msgstr "Il piano di taglio è posizionato fuori dall'oggetto" +msgstr "Pjovimo plokštuma nesiekia objekto" msgid "Cut plane with groove is invalid" -msgstr "Il piano di taglio con scanalatura non è valido" +msgstr "Neteisinga pjovimo plokštuma su grioveliu" msgid "Connector" -msgstr "Connettore" +msgstr "Jungtis" msgid "Cut by Plane" -msgstr "Taglio per piano" +msgstr "Iškirpti su plokštuma" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"Gli spigoli non-manifold sono causati dallo strumento Taglia, vuoi risolvere " -"il problema ora?" +"netinkami kraštai atsirado dėl pjovimo įrankio. Ar norite sutvarkyti dabar?" msgid "Repairing model object" -msgstr "Riparazione oggetto" +msgstr "Taisomas modelio objektas" msgid "Cut by line" -msgstr "Taglia sulla linea" +msgstr "Pjovimas pagal liniją" msgid "Delete connector" -msgstr "Cancella connettore" +msgstr "Ištrinti jungtį" msgid "Mesh name" -msgstr "Nome mesh" +msgstr "Figūros pavadinimas" msgid "Detail level" -msgstr "Livello di dettaglio" +msgstr "Detalių lygis" msgid "Decimate ratio" -msgstr "Rapporto di decimazione" +msgstr "Dešimtainis santykis" #, boost-format msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to simplify the model." msgstr "" -"Lo slicing del modello \"%1%\" con più di 1 milione di triangoli potrebbe " -"essere lento. Si consiglia di semplificare il modello." +"Modelio „%1%“ apdorojimas su daugiau nei 1 milijonu trikampių gali būti " +"lėtas. Labai rekomenduojama supaprastinti modelį." msgid "Simplify model" -msgstr "Semplifica modello" +msgstr "Supaprastinti modelį" msgid "Simplify" -msgstr "Semplifica" +msgstr "Supaprastinti" msgid "Simplification is currently only allowed when a single part is selected" msgstr "" -"La semplificazione è attualmente consentita solo quando è selezionata una " -"singola parte" +"Šiuo metu supaprastinimas leidžiamas tik tada, kai pasirenkama viena dalis" msgid "Error" -msgstr "Errore" +msgstr "Klaida" msgid "Extra high" -msgstr "Molto alto" +msgstr "Papildomas aukštis" msgid "High" -msgstr "Alto" +msgstr "Aukštas" msgid "Medium" -msgstr "Medio" +msgstr "Vidutinis" msgid "Low" -msgstr "Basso" +msgstr "Žemas" msgid "Extra low" -msgstr "Molto basso" +msgstr "Itin žemas" #, c-format, boost-format msgid "%d triangles" -msgstr "%d triangoli" +msgstr "%d trikampiai" msgid "Show wireframe" -msgstr "Mostra wireframe" +msgstr "Rodyti vielinį rėmą" -#, boost-format -msgid "%1%" -msgstr "%1%" +msgid "Can't apply when processing preview." +msgstr "Negalima taikyti, kai atliekama proceso peržiūra." -msgid "Can't apply when process preview." -msgstr "Non si può applicare durante la creazione dell'anteprima." - -msgid "Operation already cancelling. Please wait few seconds." -msgstr "Operazione già annullata. Si prega di attendere qualche secondo." +msgid "Operation already cancelling. Please wait a few seconds." +msgstr "Operacija jau atšaukiama. Palaukite kelias sekundes." msgid "Face recognition" -msgstr "Riconoscimento facciale" +msgstr "Paviršių atpažinimas" msgid "Perform Recognition" -msgstr "Esegui riconoscimento" - -msgid "Brush size" -msgstr "Misura del pennello" - -msgid "Brush shape" -msgstr "Forma del pennello" +msgstr "Atlikti atpažinimą" msgid "Enforce seam" -msgstr "Forza la giunzione" +msgstr "Priverstinė siūlė" msgid "Block seam" -msgstr "Blocca giunzione" +msgstr "Blokuoti siūlę" msgid "Seam painting" -msgstr "Pittura giunzione" +msgstr "Siūlių piešimas" msgid "Remove selection" -msgstr "Rimuovi selezione" +msgstr "Pašalinti pasirinkimą" msgid "Entering Seam painting" -msgstr "Apertura Pittura Giunzione" +msgstr "Įjungiamas siūlių piešimas" msgid "Leaving Seam painting" -msgstr "Chiusura Pittura Giunzione" +msgstr "Išjungiamas siūlių piešimas" msgid "Paint-on seam editing" -msgstr "Modifica Pittura Giunzione" +msgstr "Taisomos pieštos siūlės" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" -msgstr "Font" +msgstr "Šriftas" msgid "Thickness" -msgstr "Spessore" +msgstr "Storis" msgid "Text Gap" -msgstr "Gap testo" +msgstr "Teksto plyšiai" msgid "Angle" -msgstr "Angolo" +msgstr "Kampas" msgid "" -"Embeded\n" +"Embedded\n" "depth" -msgstr "Profondità integrata" +msgstr "" +"Įspaudimo\n" +"gylis" msgid "Input text" -msgstr "Inserisci testo" +msgstr "Įveskite tekstą" msgid "Surface" -msgstr "Superficie" +msgstr "Paviršius" msgid "Horizontal text" -msgstr "Testo orizzontale" +msgstr "Horizontalus tekstas" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Sposta il mouse verso l'alto o il basso" +msgid "Mouse move up or down" +msgstr "Pele judėkite aukštyn arba žemyn" msgid "Rotate text" -msgstr "Ruota testo" +msgstr "Sukti tekstą" msgid "Text shape" -msgstr "Formato testo" +msgstr "Formuoti tekstą" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" -msgstr "Ruota testo" +msgstr "Sukti tekstą" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "Spostamento del testo" +msgstr "Perkelti tekstą" msgid "Set Mirror" -msgstr "Imposta specchio" +msgstr "Nustatyti veidrodį" msgid "Embossed text" -msgstr "Testo in rilievo" +msgstr "Iškilus tekstas" msgid "Enter emboss gizmo" -msgstr "Apri gizmo rilievo" +msgstr "Įjungti iškilimo įrankį" msgid "Leave emboss gizmo" -msgstr "Chiudi gizmo rilievo" +msgstr "Palikti reljefinio rašto įrankį" msgid "Embossing actions" -msgstr "Azioni di rilievo" +msgstr "Reljefiniai veiksmai" msgid "Emboss" -msgstr "Rilievo" +msgstr "Iškelti" msgid "NORMAL" -msgstr "NORMALE" +msgstr "ĮPRASTAS" msgid "SMALL" -msgstr "PICCOLO" +msgstr "MAŽAS" msgid "ITALIC" -msgstr "CORSIVO" +msgstr "KURSYVAS" msgid "SWISS" -msgstr "SVIZZERO" +msgstr "KLASIKINIS" msgid "MODERN" -msgstr "MODERNO" +msgstr "MODERNUS" msgid "First font" -msgstr "Primo font" +msgstr "Pirmas šriftas" msgid "Default font" -msgstr "Font predefinito" +msgstr "Numatytasis šriftas" msgid "Advanced" -msgstr "Avanzate" +msgstr "Plačiau" msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." -msgstr "" -"Il testo non può essere scritto con il font selezionato. Provare a scegliere " -"un altro font." +msgstr "Pasirinktu šriftu negalima rašyti teksto. Pasirinkite kitą šriftą." msgid "Embossed text cannot contain only white spaces." -msgstr "Il testo in rilievo non può contenere solo spazi vuoti." +msgstr "Reljefinis tekstas negali būti sudarytas vien iš tarpų." msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "" -"Il testo contiene un glifo di carattere (rappresentato da '?') sconosciuto " -"dal font." +msgstr "Texte yra simbolių (žymimi '?' ), kurių šriftas neatpažįsta." msgid "Text input doesn't show font skew." -msgstr "L'immissione di testo non mostra l'inclinazione dei caratteri." +msgstr "Teksto įvestis nerodo šrifto pasvirimo." msgid "Text input doesn't show font boldness." -msgstr "L'immissione di testo non mostra il grassetto dei caratteri." +msgstr "Teksto įvestis nerodo šrifto paryškinimo." msgid "Text input doesn't show gap between lines." -msgstr "L'inserimento del testo non mostra lo spazio tra le righe." +msgstr "Teksto įvestis nerodo tarpelio tarp eilučių." msgid "Too tall, diminished font height inside text input." -msgstr "" -"Altezza del carattere troppo alta e ridotta all'interno dell'input di testo." +msgstr "Per aukštas, - sumažintas šrifto aukštis teksto įvedimo laukelyje." msgid "Too small, enlarged font height inside text input." -msgstr "" -"Altezza del carattere troppo piccola e ingrandita all'interno dell'input di " -"testo." +msgstr "Per mažas, - padidintas šrifto aukštis teksto įvedimo laukelyje." msgid "Text doesn't show current horizontal alignment." -msgstr "Il testo non mostra l'allineamento orizzontale corrente." +msgstr "Tekstas nerodo dabartinio horizontalaus išlyginimo." msgid "Revert font changes." -msgstr "Ripristina modifiche al carattere." +msgstr "Grąžinti šriftą į pradinę būseną." #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "Il font \"%1%\" non può essere selezionato." +msgstr "Nepavyksta pasirinkti \"%1%\" šrifto ." msgid "Operation" -msgstr "Operazione" +msgstr "Operacija" msgid "Join" -msgstr "Unisci" +msgstr "Sulieti" msgid "Click to change text into object part." -msgstr "Fare clic per trasformare il testo in una parte dell'oggetto." +msgstr "Spustelėkite, kad tekstas taptų objekto dalimi." msgid "You can't change a type of the last solid part of the object." -msgstr "" -"Non è possibile modificare il tipo dell'ultima parte solida dell'oggetto." +msgstr "Negalite pakeisti paskutinės vientisos objekto dalies tipo." msgctxt "EmbossOperation" msgid "Cut" -msgstr "Taglia" +msgstr "Pjauti" msgid "Click to change part type into negative volume." -msgstr "Fare clic per cambiare il tipo di parte in volume negativo." +msgstr "Spustelėkite, kad dalies tipą pakeistumėte į neigiamą tūrį (ertmę)." msgid "Modifier" -msgstr "Modificatore" +msgstr "Modifikatorius" msgid "Click to change part type into modifier." -msgstr "Fare clic per cambiare il tipo di parte in modificatore." +msgstr "Spustelėkite, kad dalies tipą pakeistumėte į modifikatorių." msgid "Change Text Type" -msgstr "Cambia tipo di testo" +msgstr "Pakeisti teksto tipą" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "Rinomina lo stile(%1%) per il testo in rilievo:" +msgid "Rename style (%1%) for embossing text" +msgstr "Pervadinkite (%1%) stilių reljefiniam tekstui" msgid "Name can't be empty." -msgstr "Il nome non può essere vuoto." +msgstr "Pavadinimas negali būti tuščias." msgid "Name has to be unique." -msgstr "Il nome deve essere univoco." +msgstr "Pavadinimas privalo būti unikalus." msgid "OK" -msgstr "OK" +msgstr "Gerai" msgid "Rename style" -msgstr "Rinomina lo stile" +msgstr "Pervardinti stilių" msgid "Rename current style." -msgstr "Rinomina lo stile corrente." +msgstr "Pervardinti dabartinį stilių." msgid "Can't rename temporary style." -msgstr "Non è possibile rinominare lo stile temporaneo." +msgstr "Negalima pervardinti laikino stiliaus." msgid "First Add style to list." -msgstr "Prima Aggiungi lo stile all'elenco." +msgstr "Pirmiausia įtraukite stilių į sąrašą." #, boost-format msgid "Save %1% style" -msgstr "Salva lo stile %1%" +msgstr "Išsaugoti %1% stilių" msgid "No changes to save." -msgstr "Nessuna modifica da salvare." +msgstr "Nėra jokių pakeitimų." msgid "New name of style" -msgstr "Nuovo nome dello stile" +msgstr "Naujas stiliaus pavadinimas" msgid "Save as new style" -msgstr "Salva come nuovo stile" +msgstr "Išsaugoti kaip naują stilių" msgid "Only valid font can be added to style." -msgstr "Solo i font validi possono essere aggiunti allo stile." +msgstr "Į stilių gali būti įtrauktas tik tinkamas šriftas." msgid "Add style to my list." -msgstr "Aggiungi lo stile alla mia lista." +msgstr "Įtraukti stilių į mano sąrašą." msgid "Save as new style." -msgstr "Salva come nuovo stile." +msgstr "Išsaugoti kaip naują stilių." msgid "Remove style" -msgstr "Rimuovi stile" +msgstr "Pašalinti stilių" msgid "Can't remove the last existing style." -msgstr "Non è possibile rimuovere l'ultimo stile esistente." +msgstr "Negalima pašalinti paskutinio stiliaus." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "Sei sicuro di voler rimuovere definitivamente lo stile \"%1%\"?" +msgstr "Ar tikrai norite visiškai pašalinti \"%1%\" stilių?" #, boost-format msgid "Delete \"%1%\" style." -msgstr "Cancella lo stile \"%1%\"." +msgstr "Ištrinti \"%1%\" stilių." #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "Non è possibile eliminare \"%1%\". È l'ultimo stile." +msgstr "Negalima ištrinti \"%1%\" stiliaus, nes jis yra paskutinis." #, boost-format msgid "Can't delete temporary style \"%1%\"." -msgstr "Non è possibile eliminare lo stile temporaneo \"%1%\"." +msgstr "Negalima pašalinti laikino \"%1%\" stiliaus." #, boost-format msgid "Modified style \"%1%\"" -msgstr "Modificato lo stile \"%1%\"" +msgstr "Pakeistas \"%1%\" stilius" #, boost-format msgid "Current style is \"%1%\"" -msgstr "Lo stile corrente è \"%1%\"" +msgstr "Dabartinis stilius yra \"%1%\"" #, boost-format msgid "" @@ -879,197 +1020,198 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" -"Se si cambia lo stile in \"%1%\", la modifica dello stile attuale verrà " -"eliminata.\n" +"Stilius bus pakeistas į \"%1%“. Dėl to bus panaikinti visi dabartinio " +"stiliaus pakeitimai.\n" "\n" -"Vuoi continuare comunque?" +"Ar vis tiek norite tęsti?" msgid "Not valid style." -msgstr "Stile non valido." +msgstr "Netinkamas stilius." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "Lo stile \"%1%\" non può essere usato e sarà rimosso dall'elenco." +msgstr "" +"\"%1%\" stilius negali būti naudojimas, todėl bus pašalintas iš sąrašo." msgid "Unset italic" -msgstr "Corsivo non impostato" +msgstr "Išjungti kursyvą" msgid "Set italic" -msgstr "Imposta corsivo" +msgstr "Įjungti kursyvą" msgid "Unset bold" -msgstr "Grassetto non impostato" +msgstr "Išjungti paryškinimą" msgid "Set bold" -msgstr "Imposta grassetto" +msgstr "Įjungti paryškinimą" msgid "Revert text size." -msgstr "Ripristina dimensione testo." +msgstr "Atstatyti teksto dydį." msgid "Revert embossed depth." -msgstr "Ripristina spessore rilievo." +msgstr "Atstatyti reljefo gylį." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" -"Le opzioni avanzate non possono essere modificate per il font selezionato.\n" -"Selezionare un altro font." +"Pasirinktam šriftui negalima keisti išplėstinių parinkčių.\n" +"Pasirinkite kitą šriftą." msgid "Revert using of model surface." -msgstr "Ripristina usando la superficie del modello." +msgstr "Atstatyti modelio paviršiaus naudojimą." msgid "Revert Transformation per glyph." -msgstr "Invertire la trasformazione per glifo." +msgstr "Atstatyti simbolio pakeitimus." msgid "Set global orientation for whole text." -msgstr "Imposta l'orientamento globale per tutto il testo." +msgstr "Nustatyti viso teksto bendrą orientaciją." msgid "Set position and orientation per glyph." -msgstr "Imposta la posizione e l'orientamento per glifo." +msgstr "Nustatyti kiekvieno simbolio atskirą poziciją ir orientaciją." msgctxt "Alignment" msgid "Left" -msgstr "Sinistra" +msgstr "Kairė" msgctxt "Alignment" msgid "Center" -msgstr "Centro" +msgstr "Centras" msgctxt "Alignment" msgid "Right" -msgstr "Destra" +msgstr "Dešinė" msgctxt "Alignment" msgid "Top" -msgstr "Superiore" +msgstr "Viršutinis" msgctxt "Alignment" msgid "Middle" -msgstr "Mediano" +msgstr "Vidurys" msgctxt "Alignment" msgid "Bottom" -msgstr "Inferiore" +msgstr "Apatinis" msgid "Revert alignment." -msgstr "Ripristinare l'allineamento." +msgstr "Atstatyti lygiavimą." #. TRN EmbossGizmo: font units msgid "points" -msgstr "punti" +msgstr "taškai" msgid "Revert gap between characters" -msgstr "Ripristina distanza tra i caratteri" +msgstr "Atstatyti tarpus tarp raidžių" msgid "Distance between characters" -msgstr "Distanza tra i caratteri" +msgstr "Atstumas tarp simbolių" msgid "Revert gap between lines" -msgstr "Ripristina distanza tra le linee" +msgstr "Atstatyti tarpus tarp eilučių" msgid "Distance between lines" -msgstr "Distanza tra le linee" +msgstr "Atstumas tarp eilučių" msgid "Undo boldness" -msgstr "Annulla grassetto" +msgstr "Panaikinti paryškinimą" msgid "Tiny / Wide glyphs" -msgstr "Glifi piccoli / larghi" +msgstr "Siauri / platūs simboliai" msgid "Undo letter's skew" -msgstr "Annulla l'inclinazione della lettera" +msgstr "Panaikinti raidės pasvirimą" msgid "Italic strength ratio" -msgstr "Fattore intensità corsivo" +msgstr "Kursyvo pasvirimo kampas" msgid "Undo translation" -msgstr "Annulla traduzione" +msgstr "Panaikinti vertimą" msgid "Distance of the center of the text to the model surface." -msgstr "Distanza del centro del testo dalla superficie del modello." +msgstr "Atstumas nuo teksto centro iki modelio paviršiaus." msgid "Undo rotation" -msgstr "Annulla rotazione" +msgstr "Panaikinti pasukimą" -msgid "Rotate text Clock-wise." -msgstr "Ruota il testo in senso orario." +msgid "Rotate text Clockwise." +msgstr "Sukti tekstą pagal laikrodžio rodyklę." msgid "Unlock the text's rotation when moving text along the object's surface." -msgstr "" -"Sblocca la rotazione del testo quando lo sposti lungo la superficie " -"dell'oggetto." +msgstr "Leisti tekstui laisvai suktis jį stumdant objekto paviršiumi." msgid "Lock the text's rotation when moving text along the object's surface." -msgstr "" -"Blocca la rotazione del testo quando lo si sposta lungo la superficie " -"dell'oggetto." +msgstr "Neleisti tekstui laisvai suktis jį stumdant objekto paviršiumi." msgid "Select from True Type Collection." -msgstr "Seleziona dalla Raccolta True Type." +msgstr "Pasirinkti iš TrueType rinkinio." msgid "Set text to face camera" -msgstr "Imposta il testo in modo che sia rivolto verso la propria vista" +msgstr "Pasukti tekstą taip, kad jis žiūrėtų į kamerą" msgid "Orient the text towards the camera." -msgstr "Orienta il testo verso di te." +msgstr "Pasukti tekstą į kameros pusę." + +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "Šrifto „%1%“ negalima naudoti. Pasirinkite kitą." #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" -"Non è possibile caricare esattamente lo stesso font(\"%1%\"). L'applicazione " -"ne ha selezionato uno simile(\"%2%\"). È necessario specificare il font per " -"abilitare la modifica del testo." +"Negalima įkelti lygiai tokio paties šrifto (\"%1%\"). Programa pasirinko " +"panašų šriftą(\"%2%\"). Turite nurodyti šriftą, kad būtų galima redaguoti " +"tekstą." msgid "No symbol" -msgstr "Nessun simbolo" +msgstr "Nėra simbolio" msgid "Loading" -msgstr "Caricamento" +msgstr "Įkeliama" msgid "In queue" -msgstr "In coda" +msgstr "Eilėje" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" -msgstr "Altezza" +msgstr "Aukštis" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" -msgstr "Usa superficie" +msgstr "Naudoti paviršių" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" -msgstr "Per glifo" +msgstr "Kiekvienam simboliui" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" -msgstr "Allineamento" +msgstr "Lygiavimas" #. TRN - Input label. Be short as possible msgid "Char gap" -msgstr "Distanza tra i caratteri" +msgstr "Tarpas tarp simbolių" #. TRN - Input label. Be short as possible msgid "Line gap" -msgstr "Spazio tra le linee" +msgstr "Tarpas tarp eilučių" #. TRN - Input label. Be short as possible msgid "Boldness" -msgstr "Spessore" +msgstr "Pastorintas" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" -msgstr "Fattore Inclinazione" +msgstr "Pasvirimas" #. TRN - Input label. Be short as possible #. Distance from model surface to be able @@ -1077,385 +1219,449 @@ msgstr "Fattore Inclinazione" #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" -msgstr "Dalla superficie" +msgstr "Nuo paviršiaus" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" -msgstr "Mantieni l'alto" +msgstr "Laikyti viršun" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" -msgstr "Raccolta" +msgstr "Rinkinys" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" -msgstr "Ruota SVG" +msgstr "SVG sukimas" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" -msgstr "Muovi SVG" +msgstr "SVG perkėlimas" msgid "Enter SVG gizmo" -msgstr "Apri gizmo SVG" +msgstr "Pasirinkti SVG įrankį" msgid "Leave SVG gizmo" -msgstr "Chiudi gizmo SVG" +msgstr "Išeiti iš SVG įrankio" msgid "SVG actions" -msgstr "Azioni SVG" +msgstr "SVG veiksmai" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" -msgstr "Opacità (%1%)" +msgstr "Permatomumas (%1%)" #, boost-format msgid "Color gradient (%1%)" -msgstr "Gradiente di colore (%1%)" +msgstr "Spalvos gradientas (%1%)" msgid "Undefined fill type" -msgstr "Tipo di riempimento non definito" +msgstr "Nenustatytas užpildymo tipas" msgid "Linear gradient" -msgstr "Gradiente lineare" +msgstr "Linijinis gradientas" msgid "Radial gradient" -msgstr "Gradiente radiale" +msgstr "Centrinis gradientas" msgid "Open filled path" -msgstr "Apri il percorso compilato" +msgstr "Atidaryti uždarą kontūrą" msgid "Undefined stroke type" -msgstr "Tipo di tratto non definito" +msgstr "Nenustatytas brūkšnio stilius" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" -"Il percorso non può essere risolto con l'auto-intersezione e i punti " -"multipli." +"Kelias negali būti sutvarkytas dėl savaiminio susikirtimo ir kelių taškų." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" -"La forma finale contiene un'auto-intersezione o più punti con le stesse " -"coordinate." +"Galutinėje formoje yra savaiminė sankirta arba keli taškai su tomis pačiomis " +"koordinatėmis." #, boost-format msgid "Shape is marked as invisible (%1%)." -msgstr "La forma è segnata come invisibile (%1%)" +msgstr "Figūra pažymėta kaip nematoma (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "" -"Il riempimento della forma (%1%) contiene un'informazione non supportata: " -"%2%." +msgstr "Figūros %1% užpildas turi nepalaikomą %2%." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." -msgstr "" -"Il tratto della forma (%1%) è troppo sottile (la larghezza minima è di %2% " -"mm)" +msgstr "Figūros (%1%) brūkšnys per plonas (minimalus plotis - %2% mm)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "Il tratto della forma (%1%) contiene un'immagine non supportata: %2%." +msgstr "Figūros (%1%) brūkšnys turi nepalaikomą %2%." msgid "Face the camera" -msgstr "Rivolgi verso di te" +msgstr "Pasukti į kamerą" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" -msgstr "Nome file sconosciuto" +msgstr "Nežinomas failo pavadinimas" #, boost-format msgid "SVG file path is \"%1%\"" -msgstr "Il percorso del file SVG è \"%1%\"." +msgstr "SVG failo kelias yra \"%1%\"" msgid "Reload SVG file from disk." -msgstr "Ricarica il file SVG dal disco." +msgstr "Pakartotinai įkelti SVG failą iš disko." msgid "Change file" -msgstr "Cambia file" +msgstr "Pakeisti failą" -msgid "Change to another .svg file" -msgstr "Passa a un altro file .svg" +#, fuzzy +msgid "Change to another SVG file." +msgstr "Pakeisti į kitą .svg failą" msgid "Forget the file path" -msgstr "Dimentica il percorso del file" +msgstr "Pamiršti failo kelią" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" -"NON salvare il percorso locale del file 3MF.\n" -"Disattiva anche l'opzione \"ricarica da disco\"." +"NEsaugoti vietinio failo kelio į 3MF failą.\n" +"Taip pat išjungiama parinktis „pakartotinai įkelti iš disko“." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" -msgstr "Integra" +msgstr "Perkelti detales" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "Integra nel modello come parte non modificabile" +msgstr "Perkelti į modelį kaip netaisomas dalis" msgid "Save as" -msgstr "Salva come" +msgstr "Išsaugoti kaip" msgid "Save SVG file" -msgstr "Salva file SVG" +msgstr "Išsaugoti SVG failą" -msgid "Save as '.svg' file" -msgstr "Salva come file '.svg" +msgid "Save as SVG file." +msgstr "Išsaugoti kaip \".svg\" failą" msgid "Size in emboss direction." -msgstr "Dimensioni in direzione del rilievo." +msgstr "Išspaudimo aukštis." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" -msgstr "" -"La dimensione della scala cambia anche la quantità di campioni della curva " -"(%1%)" +msgstr "Mastelis taip pat keičia kreivės taškų skaičių (%1%)" msgid "Width of SVG." -msgstr "Larghezza dell'SVG." +msgstr "SVG plotis." msgid "Height of SVG." -msgstr "Altezza dell'SVG." +msgstr "SVG aukštis." msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "Blocca/sblocca le proporzioni dell'SVG." +msgstr "Įjungti / Išjungti SVG proporcijų laikymąsi." msgid "Reset scale" -msgstr "Reimposta scala" +msgstr "Iš naujo nustatyti skalę" msgid "Distance of the center of the SVG to the model surface." -msgstr "Distanza del centro dell'SVG dalla superficie del modello." +msgstr "Atstumas nuo SVG centro iki modelio paviršiaus." msgid "Reset distance" -msgstr "Ripristina distanza" +msgstr "Atstatyti atstumą į numatytąjį" msgid "Reset rotation" -msgstr "Reimposta rotazione" +msgstr "Iš naujo nustatyti sukimąsi" msgid "Lock/unlock rotation angle when dragging above the surface." -msgstr "" -"Blocca/sblocca l'angolo di rotazione quando si trascina sopra la superficie." +msgstr "Įjungti / išjungti sukimosi kampą tempiant paviršiumi." msgid "Mirror vertically" -msgstr "Specchia verticalmente" +msgstr "Atspindėti vertikaliai" msgid "Mirror horizontally" -msgstr "Specchia orizzontalmente" +msgstr "Atspindėti horizontaliai" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" -msgstr "Cambia il tipo di SVG" +msgstr "Keisti SVG tipą" #. TRN - Input label. Be short as possible msgid "Mirror" -msgstr "Specchia" +msgstr "Atspindys" msgid "Choose SVG file for emboss:" -msgstr "Scegli il file SVG per il rilievo:" +msgstr "Pasirinkti SVG failą išspaudimui:" #, boost-format msgid "File does NOT exist (%1%)." -msgstr "Il file NON esiste (%1%)." +msgstr "Failas neegzistuoja (%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" -msgstr "" -"Il nome del file deve terminare con \".svg\" ma è stato selezionato %1%" +msgstr "Failo pavadinimas turi turėti plėtinį \".svg\", o jūs pasirinkote %1%" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." -msgstr "Il parser Nano SVG non può essere caricato dal file (%1%)." +msgstr "„NanoSVG“ analizatorius negali įkelti failo (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "Il file SVG NON contiene un percorso singolo da incidere (%1%)." +msgstr "SVG failas NETURI nė vieno kontūro, tinkamo išspaudimui (%1%)." + +msgid "No feature" +msgstr "Nėra funkcijos" msgid "Vertex" -msgstr "Vertice" +msgstr "Viršūnė" msgid "Edge" -msgstr "Bordo" +msgstr "Briauna" msgid "Plane" -msgstr "Piano" +msgstr "Plokštuma" msgid "Point on edge" -msgstr "Punto sul bordo" +msgstr "Taškas ant briaunos" msgid "Point on circle" -msgstr "Punto sulla circonferenza" +msgstr "Taškas ant apskritimo" msgid "Point on plane" -msgstr "Punto sul piano" +msgstr "Taškas ant plokštumos" msgid "Center of edge" -msgstr "Centro del bordo" +msgstr "Briaunos centras" msgid "Center of circle" -msgstr "Centro della circonferenza" - -msgid "ShiftLeft mouse button" -msgstr "MaiuscTasto sinistro del mouse" +msgstr "Apskritimo centras" msgid "Select feature" -msgstr "Seleziona caratteristica" +msgstr "Pasirinkti elementą" msgid "Select point" -msgstr "Seleziona punto" +msgstr "Pasirinkti tašką" msgid "Delete" -msgstr "Elimina" +msgstr "Ištrinti" msgid "Restart selection" -msgstr "Riavvio della selezione" +msgstr "Pasirinkti iš naujo" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Deseleziona" +msgid "Cancel a feature until exit" +msgstr "Atšaukti funkciją, kol išeisite" msgid "Measure" -msgstr "Misura" +msgstr "Matuoti" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Patvirtinkite išplėtimo koeficientą = 1 ir pasirinkite bent vieną objektą." msgid "Edit to scale" -msgstr "Modifica in scala" +msgstr "Taisyti masteliui" msgctxt "Verb" -msgid "Scale" -msgstr "Ridimensiona" +msgid "Scale all" +msgstr "Bendras mastelis" msgid "None" -msgstr "Nessuno" +msgstr "Nieko" msgid "Diameter" -msgstr "Diametro" +msgstr "Skersmuo" msgid "Length" -msgstr "Lunghezza" +msgstr "Ilgis" msgid "Selection" -msgstr "Selezione" +msgstr "Pasirinkimas" + +msgid " (Moving)" +msgstr " (Perkėlimas)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Pasirinkite 2 objektų paviršius ir \n" +" leiskite objektams susijungti." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Pasirinkite 2 taškus arba apskritimus ant \n" +"objektų ir nurodykite atstumą tarp jų." + +msgid "Face" +msgstr "Paviršius" + +msgid " (Fixed)" +msgstr " (Pataisyta)" + +msgid "Point" +msgstr "Taškas" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"1 funkcija buvo iš naujo nustatyta, \n" +"2 funkcija buvo 1 funkcija" + +msgid "Warning: please select Plane's feature." +msgstr "Įspėjimas: pasirinkite Plokštumos funkciją." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Įspėjimas: pasirinkite Taško arba Apskritimo funkciją." + +msgid "Warning: please select two different meshes." +msgstr "Įspėjimas: pasirinkite dvi skirtingas figūras." msgid "Copy to clipboard" -msgstr "Copia negli appunti" +msgstr "Nukopijuoti į iškarpinę" msgid "Perpendicular distance" -msgstr "Distanza perpendicolare" +msgstr "Statmenas atstumas" msgid "Distance" -msgstr "Distanza" +msgstr "Atstumas" msgid "Direct distance" -msgstr "Distanza diretta" +msgstr "Tiesioginis atstumas" msgid "Distance XYZ" -msgstr "Distanza XYZ" +msgstr "Atstumas XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Lygiagrečiai" + +msgid "Center coincidence" +msgstr "Centro sutapimas" + +msgid "Feature 1" +msgstr "Funkcija 1" + +msgid "Reverse rotation" +msgstr "Apsukti sukimąsi" + +msgid "Rotate around center:" +msgstr "Pasukti aplink centrą:" + +msgid "Parallel distance:" +msgstr "Lygiagretus atstumas:" + +msgid "Flip by Face 2" +msgstr "Apversti pagal paviršių 2" msgid "Notice" -msgstr "Avvertenza" +msgstr "Įspėjimas" msgid "Undefined" -msgstr "Indefinito" +msgstr "Neapibrėžtas" #, boost-format msgid "%1% was replaced with %2%" -msgstr "%1% è stato sostituito con %2%" +msgstr "%1% buvo pakeistas į %2%" msgid "The configuration may be generated by a newer version of Snapmaker Orca." -msgstr "" -"La configurazione potrebbe essere generata da una versione più recente di " -"Snapmaker Orca." +msgstr "Konfigūracija gali būti sukurta naujesnėje Snapmaker Orca versijoje." msgid "Some values have been replaced. Please check them:" -msgstr "Alcuni valori sono stati sostituiti. Per favore controllali:" +msgstr "Kai kurios vertės buvo pakeistos. Prašome jas patikrinti:" msgid "Process" -msgstr "Processo" +msgstr "Vykdyti" msgid "Filament" -msgstr "Filamento" +msgstr "Gija" msgid "Machine" -msgstr "Macchina" +msgstr "Įrenginys" msgid "Configuration package was loaded, but some values were not recognized." msgstr "" -"Il pacchetto di configurazione è stato caricato, ma alcuni valori non sono " -"stati riconosciuti." +"Konfigūracijos paketas buvo įkeltas, tačiau kai kurios reikšmės nebuvo " +"atpažintos." #, boost-format msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" -"Il file di configurazione \"%1%\" è stato caricato, ma alcuni valori non " -"sono stati riconosciuti." +"Konfigūracijos failas „%1%“ buvo įkeltas, tačiau kai kurios reikšmės nebuvo " +"atpažintos." + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Remiantis „PrusaSlicer“ ir „BambuStudio“" msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" -"Snapmaker Orca ha esaurito la memoria e verrà chiuso. Questo potrebbe essere \n" -"un bug. Segnala questo errore al supporto tecnico." +"Snapmaker Orca nenumatytai užsidarys, nes pritrūko atminties. Tai gali būti " +"programinės įrangos klaida. Jei galite, praneškite apie šią problemą mūsų " +"komandai." msgid "Fatal error" -msgstr "Errore irreversibile" +msgstr "Lemtinga klaida" msgid "" "Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" -"Si è verificato un errore nella localizzazione e Snapmaker Orca verrà chiuso." +"Snapmaker Orca užsidarys dėl vertimo klaidos. Būtume dėkingi, jei praneštumėte " +"apie konkrečią situaciją, kai kilo ši problema." msgid "Critical error" -msgstr "Errore critico" +msgstr "Kritinė klaida" #, boost-format msgid "Snapmaker Orca got an unhandled exception: %1%" -msgstr "Snapmaker Orca ha ricevuto un'eccezione non gestita: %1%" +msgstr "Snapmaker Orca susidūrė su neapdorota klaida: %1%" msgid "Untitled" -msgstr "Senza titolo" +msgstr "Be pavadinimo" msgid "Downloading Bambu Network Plug-in" -msgstr "Scaricando il plug-in Bambu Network" +msgstr "Siunčiamas Bambu tinklo papildinys" msgid "Login information expired. Please login again." -msgstr "Le informazioni di login sono scadute. Effettua nuovamente il login." +msgstr "Prisijungimo seansas pasibaigė. Prašome prisijungti iš naujo." msgid "Incorrect password" -msgstr "Password errata" +msgstr "Neteisingas slaptažodis" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" -msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" +msgstr "Nepavyko %s prisijungimas! [SN:%s, kodas=%s]" msgid "" "Snapmaker Orca requires the Microsoft WebView2 Runtime to operate certain " "features.\n" "Click Yes to install it now." msgstr "" -"Snapmaker Orca richiede Microsoft WebView2 Runtime per utilizzare alcune " -"funzionalità.\n" -"Fai clic su Sì per installarlo ora." +"Norint naudoti kai kurias „Snapmaker Orca“ funkcijas, reikalinga „Microsoft " +"WebView2 Runtime“.\n" +"Spustelėkite „Taip“, kad ją įdiegtumėte dabar." msgid "WebView2 Runtime" -msgstr "WebView2 Runtime" +msgstr "\"WebView2\" paleidimo terpė" + +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Išteklių kelias neegzistuoja arba nėra katalogas: %s" #, c-format, boost-format msgid "" @@ -1463,23 +1669,24 @@ msgid "" "Do you want to continue?" msgstr "" "%s\n" -"Vuoi continuare?" +"Ar norite tęsti?" msgid "Remember my choice" -msgstr "Ricorda la mia scelta" +msgstr "Prisiminti mano pasirinkimą" msgid "Loading configuration" -msgstr "Caricamento configurazione" +msgstr "Įkeliama konfigūracija" #, c-format, boost-format msgid "Click to download new version in default browser: %s" -msgstr "Fai clic per scaricare la nuova versione nel browser predefinito: %s" +msgstr "" +"Spustelėkite, kad atsisiųstumėte naują versiją numatytoje naršyklėje: %s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "Snapmaker Orca necessita di aggiornamento" +msgstr "Snapmaker Orca reikia atnaujinti" msgid "This is the newest version." -msgstr "Hai la versione più recente." +msgstr "Čia yra naujausia versija." msgid "Info" msgstr "Info" @@ -1490,1071 +1697,1210 @@ msgid "" "Please note, application settings will be lost, but printer profiles will " "not be affected." msgstr "" -"Il file di configurazione di Snapmaker Orca potrebbe essere danneggiato e non " -"può essere analizzato.\n" -"Snapmaker Orca ha tentato di ricreare il file di configurazione.\n" -"Si noti che le impostazioni dell'applicazione andranno perse, ma i profili " -"della stampante non saranno interessati." +"Snapmaker Orca konfigūracijos failas gali būti sugadintas ir jo negalima " +"apdoroti.\n" +"Snapmaker Orca bandė iš naujo sukurti konfigūracijos failą.\n" +"Atkreipkite dėmesį, kad programos nustatymai bus prarasti, tačiau " +"spausdintuvo profiliai neturėtų būti paveikti." msgid "Rebuild" -msgstr "Ricrea" +msgstr "Perkurti" msgid "Loading current presets" -msgstr "Caricamento dei preset correnti" +msgstr "Įkeliami dabartiniai nustatymai" msgid "Loading a mode view" -msgstr "Caricamento di una modalità di visualizzazione" +msgstr "Įkeliamas režimo rodinys" -msgid "Choose one file (3mf):" -msgstr "Scegli file (3mf):" +msgid "Choose one file (3MF):" +msgstr "Pasirinkite vieną failą (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Scegli uno o più file (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "" +"Pasirinkite vieną ar kelis failus (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Scegli uno o più file (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Pasirinkite vieną ar kelis failus (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" -msgstr "Seleziona il file ZIP" +msgstr "Pasirinkite ZIP failą" -msgid "Choose one file (gcode/3mf):" -msgstr "Scegli file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Pasirinkite vieną failą (GCODE/3MF):" msgid "Some presets are modified." -msgstr "Alcuni preset vengono modificati." +msgstr "Kai kurie nustatymai pakeisti." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"È possibile conservare i preset modificati per il nuovo progetto, eliminarli " -"o salvare le modifiche come nuovi preset." +"Pakeistus išankstinius nustatymus galite išsaugoti naujame projekte, išmesti " +"arba išsaugoti pakeitimus kaip naujus išankstinius nustatymus." msgid "User logged out" -msgstr "Utente disconnesso" +msgstr "Naudotojas atsijungė" msgid "new or open project file is not allowed during the slicing process!" -msgstr "non è consentito aprire un nuovo file progetto durante lo slicing!" +msgstr "" +"negalima kurti ar atidaryti naujo projekto failo, kai vyksta sluoksniavimo " +"procesas!" msgid "Open Project" -msgstr "Apri Progetto" +msgstr "Atidaryti projektą" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" -"La versione Snapmaker Orca è obsoleta, devi aggiornarla all'ultima versione \n" -"prima di poterla utilizzare normalmente" +"Snapmaker Orca versija yra pasenusi. Norint naudotis, reikia ją atnaujinti į " +"naujausią versiją." msgid "Privacy Policy Update" -msgstr "Aggiornamento dell'informativa sulla privacy" +msgstr "Privatumo politikos atnaujinimas" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"Il numero di impostazioni utente memorizzate nella cache cloud ha superato " -"il limite massimo. Le nuove impostazioni utente create possono essere " -"utilizzate solo in locale." +"Pasiektas debesyje saugomų naudotojo nustatymų limitas. Naujai sukurti " +"naudotojo nustatymai bus prieinami tik šiame įrenginyje." msgid "Sync user presets" -msgstr "Sincronizzare le preset dell'utente" +msgstr "Sinchronizuoti naudotojo nustatymus" msgid "Loading user preset" -msgstr "Caricamento del preset utente" +msgstr "Įkeliami naudotojo nustatymai" msgid "Switching application language" -msgstr "Cambio lingua applicazione" +msgstr "Perjungiama programoskalba" msgid "Select the language" -msgstr "Seleziona la lingua" +msgstr "Pasirinkite kalbą" msgid "Language" -msgstr "Lingua" +msgstr "Kalba" msgid "*" msgstr "*" msgid "The uploads are still ongoing" -msgstr "I caricamenti sono ancora in corso" +msgstr "Įkėlimai vis dar vyksta" msgid "Stop them and continue anyway?" -msgstr "Ferma e continua comunque?" +msgstr "Sustabdyti juos ir vis tiek tęsti?" msgid "Ongoing uploads" -msgstr "Caricamenti in corso" +msgstr "Vykdomi įkėlimai" msgid "Select a G-code file:" -msgstr "Seleziona file G-code:" +msgstr "Pasirinkite G-kodo failą:" msgid "" "Could not start URL download. Destination folder is not set. Please choose " "destination folder in Configuration Wizard." msgstr "" -"Impossibile avviare il download dell'URL. La cartella di destinazione non è " -"impostata. Scegliere la cartella di destinazione nella Configurazione " -"guidata." +"Nepavyko pradėti atsisiuntimo iš interneto adreso. Nėra nurodytas paskirties " +"aplankas. Pasirinkite paskirties aplanką konfigūracijos vedlyje." msgid "Import File" -msgstr "Importa File" +msgstr "Importuoti failą" msgid "Choose files" -msgstr "Scegli file" +msgstr "Pasirinkite failus" msgid "New Folder" -msgstr "Nuova cartella" +msgstr "Naujas katalogas" msgid "Open" -msgstr "Aperto" +msgstr "Atverti" msgid "Rename" -msgstr "Rinomina" +msgstr "Pervardyti" msgid "Snapmaker Orca GUI initialization failed" -msgstr "Inizializzazione della GUI di Snapmaker Orca non riuscita" +msgstr "Snapmaker Orca grafinės vartotojo sąsajos inicijavimas nepavyko" #, boost-format -msgid "Fatal error, exception catched: %1%" -msgstr "Errore irreversibile, eccezione: %1%" +msgid "Fatal error, exception caught: %1%" +msgstr "Fatališka klaida, užfiksuota išimtis: %1%" msgid "Quality" -msgstr "Qualità" +msgstr "Kokybė" msgid "Shell" -msgstr "Guscio" +msgstr "Apvalkalas" msgid "Infill" -msgstr "Riempimento" +msgstr "Užpildymas" msgid "Support" -msgstr "Supporto" +msgstr "Atramos" msgid "Flush options" -msgstr "Opzioni spurgo" +msgstr "Gijos išleidimo nustatymai" msgid "Speed" -msgstr "Velocità" +msgstr "Greitis" msgid "Strength" -msgstr "Resistenza" +msgstr "Stiprumas" msgid "Top Solid Layers" -msgstr "Strati solidi superiori" +msgstr "Viršutiniai ištisiniai sluoksniai" msgid "Top Minimum Shell Thickness" -msgstr "Spessore minimo del guscio superiore" +msgstr "Mažiausias viršutinio apvalkalo storis" + +msgid "Top Surface Density" +msgstr "Viršutinio paviršiaus tankis" msgid "Bottom Solid Layers" -msgstr "Layer solidi inferiori" +msgstr "Apatiniai ištisiniai sluoksniai" msgid "Bottom Minimum Shell Thickness" -msgstr "Spessore minimo del guscio inferiore" +msgstr "Mažiausias apatinio apvalkalo storis" + +msgid "Bottom Surface Density" +msgstr "Apatinio paviršiaus tankis" msgid "Ironing" -msgstr "Stiratura" +msgstr "Lyginimas" msgid "Fuzzy Skin" -msgstr "Superficie Crespa" +msgstr "Grublėtas paviršius" msgid "Extruders" -msgstr "Estrusori" +msgstr "Ekstruderiai" msgid "Extrusion Width" -msgstr "Larghezza Estrusione" +msgstr "Išspaudimo plotis" msgid "Wipe options" -msgstr "Opzioni pulitura" +msgstr "Valymo parinktys" msgid "Bed adhesion" -msgstr "Adesione al piano" +msgstr "Sukibimas su pagrindu" msgid "Add part" -msgstr "Aggiungi parte" +msgstr "Pridėti dalį" msgid "Add negative part" -msgstr "Aggiungi parte negativa" +msgstr "Pridėti neigiamą elementą" msgid "Add modifier" -msgstr "Aggiungi modificatore" +msgstr "Pridėti modifikatorių" msgid "Add support blocker" -msgstr "Aggiungi blocco supporto" +msgstr "Pridėti atramų blokatorių" msgid "Add support enforcer" -msgstr "Aggiungi rinforzo supporto" +msgstr "Pridėti priverstines atramas" msgid "Add text" -msgstr "Aggiungi testo" +msgstr "Pridėti tekstą" msgid "Add negative text" -msgstr "Aggiungi testo negativo" +msgstr "Pridėti neigiamą tekstą" msgid "Add text modifier" -msgstr "Aggiungi modificatore di testo" +msgstr "Pridėti teksto modifikatorių" msgid "Add SVG part" -msgstr "Aggiungi parte SVG" +msgstr "Pridėti SVG dalį" msgid "Add negative SVG" -msgstr "Aggiungi SVG negativo" +msgstr "Pridėti neigiamą SVG" msgid "Add SVG modifier" -msgstr "Aggiungi modificatore SVG" +msgstr "Pridėti SVG modifikatorių" msgid "Select settings" -msgstr "Seleziona impostazioni" +msgstr "Pasirinkti nustatymus" msgid "Hide" -msgstr "Nascondi" +msgstr "Paslėpti" msgid "Show" -msgstr "Mostra" +msgstr "Rodyti" msgid "Del" msgstr "Del" msgid "Delete the selected object" -msgstr "Elimina l'oggetto selezionato" +msgstr "Ištrinti pasirinktą objektą" + +msgid "Backspace" +msgstr "Backspace" msgid "Load..." -msgstr "Caricamento..." +msgstr "Įkelti..." msgid "Cube" -msgstr "Cubo" +msgstr "Kubas" msgid "Cylinder" -msgstr "Cilindro" +msgstr "Cilindras" msgid "Cone" -msgstr "Cono" +msgstr "Konusas" msgid "Disc" -msgstr "Disco" +msgstr "Diskas" msgid "Torus" -msgstr "Toroide" +msgstr "Toras" msgid "Orca Cube" -msgstr "Orca Cube" +msgstr "Orca kubas" + +msgid "Orca Tolerance Test" +msgstr "Orca tolerancijos testas" msgid "3DBenchy" msgstr "3DBenchy" msgid "Autodesk FDM Test" -msgstr "Autodesk FDM Test" +msgstr "Autodesk FDM testas" msgid "Voron Cube" -msgstr "Voron Cube" +msgstr "Vorono kubas" msgid "Stanford Bunny" -msgstr "Coniglietto di Stanford" +msgstr "Stanfordo triušis" msgid "Orca String Hell" -msgstr "Orca String Hell" +msgstr "Orca stygų testas" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Questo modello presenta una goffratura del testo sulla superficie superiore. " -"Per ottenere risultati ottimali, si consiglia di impostare la 'Soglia di una " -"parete(min_width_top_surface)' su 0 affinché la 'Soglia di una sola parete " -"sulle superfici superiori' funzioni al meglio.\n" -"Sì - Modificare automaticamente queste impostazioni\n" -"No - Non modificare queste impostazioni per me" +"Šiame modelyje viršutinio paviršiaus tekstas yra išgaubtas. Norint pasiekti " +"optimalų rezultatą, rekomenduojama nustatyti „Vienos sienelės slenkstį " +"(minimalus viršutinio paviršiaus plotis)“ į 0, kad funkcija „Tik viena " +"sienelė viršutiniuose paviršiuose“ veiktų geriausiai.\n" +"\n" +"Taip - Pakeisti šiuos nustatymus automatiškai\n" +"Ne - Nekeisti šių nustatymų" msgid "Text" -msgstr "Testo" +msgstr "Teskstas" msgid "Height range Modifier" -msgstr "Modifica intervallo di altezza" +msgstr "Aukščio diapazono modifikatorius" msgid "Add settings" -msgstr "Aggiungi impostazioni" +msgstr "Pridėti nustatymus" msgid "Change type" -msgstr "Cambia tipo" +msgstr "Keisti tipą" msgid "Set as an individual object" -msgstr "Imposta come singolo oggetto" +msgstr "Nustatyti kaip atskirą objektą" msgid "Set as individual objects" -msgstr "Imposta come singoli oggetti" +msgstr "Nustatyti kaip atskirus objektus" msgid "Fill bed with copies" -msgstr "Riempi il piano di copie" +msgstr "Užpildyti pagrindą kopijomis" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "Riempi l'area rimanente del piano con copie dell'oggetto selezionato" +msgstr "Užpildyti likusią pagrindo vietą pasirinkto objekto kopijomis" msgid "Printable" -msgstr "Stampabile" +msgstr "Galima spausdinti" msgid "Fix model" -msgstr "Correggi il modello" +msgstr "Sutaisyti objektą" msgid "Export as one STL" -msgstr "Esporta come un unico STL" +msgstr "Eksportuoti kaip vieną STL" msgid "Export as STLs" -msgstr "Esportazione come STL" +msgstr "Eksportuoti kaip kelis STL" msgid "Reload from disk" -msgstr "Ricarica da disco" +msgstr "Iš naujo įkelti iš disko" msgid "Reload the selected parts from disk" -msgstr "Ricarica le parti selezionate da disco" +msgstr "Iš naujo įkelti pasirinktas dalis iš disko" msgid "Replace with STL" -msgstr "Sostituisci con STL" +msgstr "Pakeisti STL" msgid "Replace the selected part with new STL" -msgstr "Sostituisci la parte selezionata con un nuovo STL" +msgstr "Pakeisti pasirinktą dalį į naują STL" + +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" msgid "Change filament" -msgstr "Cambia filamento" +msgstr "Pakeisti giją" msgid "Set filament for selected items" -msgstr "Imposta filamento per gli elementi selezionati" +msgstr "Nustatyti giją pasirinktiems elementams" msgid "Default" -msgstr "Predefinito" +msgstr "Numatytas" #, c-format, boost-format msgid "Filament %d" -msgstr "Filamento %d" +msgstr "Gija %d" msgid "current" -msgstr "Attuale" +msgstr "dabartinė" msgid "Scale to build volume" -msgstr "Scala per creare volume" +msgstr "Mastelis pagal spausdinimo plotą" msgid "Scale an object to fit the build volume" -msgstr "Ridimensiona un oggetto per adattarlo al volume di costruzione" +msgstr "Pritaikyti objekto dydį spausdintuvui" msgid "Flush Options" -msgstr "Opzioni spurgo" +msgstr "Gijos išleidimo nustatymai" msgid "Flush into objects' infill" -msgstr "Spurga nel riempimento oggetto" +msgstr "Nuvalyti į objektų užpildą" msgid "Flush into this object" -msgstr "Spurga in questo oggetto" +msgstr "Nuvalyti į šį objektą" msgid "Flush into objects' support" -msgstr "Spurga nei supporti dell'oggetto" +msgstr "Nuvalyti į objekto atramas" msgid "Edit in Parameter Table" -msgstr "Modifica nella tabella dei parametri" +msgstr "Taisyti Parametrų lentelėje" -msgid "Convert from inch" -msgstr "Converti da pollici" +msgid "Convert from inches" +msgstr "Konvertuoti iš colių" -msgid "Restore to inch" -msgstr "Ripristina in pollici" +msgid "Restore to inches" +msgstr "Grąžinti į colius" -msgid "Convert from meter" -msgstr "Converti da metri" +msgid "Convert from meters" +msgstr "Konvertuoti iš metrų" -msgid "Restore to meter" -msgstr "Ripristina in metri" +msgid "Restore to meters" +msgstr "Grąžinti į metrus" msgid "Assemble" -msgstr "Assembla" +msgstr "Surinkti" msgid "Assemble the selected objects to an object with multiple parts" -msgstr "Assembla gli oggetti selezionati in un oggetto con più parti" +msgstr "Sujungti pasirinktus objektus į daugiadalį objektą" msgid "Assemble the selected objects to an object with single part" -msgstr "Assembla gli oggetti selezionati in un oggetto con una singola parte" +msgstr "Sujungti pasirinktus objektus į vienadalį objektą" msgid "Mesh boolean" -msgstr "Mesh booleana" +msgstr "Objektų jungimo / atėmimo / susikirtimo įrankiai" msgid "Mesh boolean operations including union and subtraction" -msgstr "Operazioni booleane di mesh, tra cui l'unione e la sottrazione" +msgstr "Įrankiai modeliams sujungti ir iškirpti" msgid "Along X axis" -msgstr "Lungo asse X" +msgstr "Išilgai X ašies" msgid "Mirror along the X axis" -msgstr "Specchia lungo l'asse X" +msgstr "Atspindėti pagal X ašį" msgid "Along Y axis" -msgstr "Lungo asse Y" +msgstr "Išilgai Y ašies" msgid "Mirror along the Y axis" -msgstr "Specchia lungo l'asse Y" +msgstr "Atspindėti pagal Y ašį" msgid "Along Z axis" -msgstr "Lungo l'asse Z" +msgstr "Išilgai Z ašies" msgid "Mirror along the Z axis" -msgstr "Specchia lungo l'asse Z" +msgstr "Atspindėti pagal Z ašį" msgid "Mirror object" -msgstr "Specchia Oggetto" +msgstr "Atspindėti objektą" msgid "Edit text" -msgstr "Modifica testo" +msgstr "Teksto taisymas" msgid "Ability to change text, font, size, ..." -msgstr "Possibilità di modificare il testo, il carattere, la dimensione, ..." +msgstr "Galimybė keisti tekstą, šriftą, dydį..." msgid "Edit SVG" -msgstr "Modifica SVG" +msgstr "Taisyti SVG" msgid "Change SVG source file, projection, size, ..." -msgstr "Cambia il file sorgente SVG, la proiezione, le dimensioni, ..." +msgstr "Keičiamas SVG šaltinis, projekcija, dydis..." msgid "Invalidate cut info" -msgstr "Annulla informazioni di taglio" +msgstr "Atnaujinti pjovimo informaciją" msgid "Add Primitive" -msgstr "Aggiungi primitiva" +msgstr "Pridėti paprastą figūrą" msgid "Add Handy models" -msgstr "Aggiungi modelli Handy" +msgstr "Pridėti patogius modelius" msgid "Add Models" -msgstr "Aggiungi modelli" +msgstr "Pridėti modelius" msgid "Show Labels" -msgstr "Mostra Etichette" +msgstr "Rodyti etiketes" msgid "To objects" -msgstr "In oggetti" +msgstr "Į objektus" msgid "Split the selected object into multiple objects" -msgstr "Dividi l'oggetto selezionato in più oggetti" +msgstr "Suskaidyti pasirinktą objektą į kelis objektus" msgid "To parts" -msgstr "In parti" +msgstr "Į dalis" msgid "Split the selected object into multiple parts" -msgstr "Dividi l'oggetto selezionato in più parti" +msgstr "Suskaidyti pasirinktą objektą į kelias dalis" msgid "Split" -msgstr "Dividi" +msgstr "Padalinti" msgid "Split the selected object" -msgstr "Dividi l'oggetto selezionato" +msgstr "Padalinti pasirinktą objektą" msgid "Auto orientation" -msgstr "Orientamento automatico" +msgstr "Automatinė padėtis" -msgid "Auto orient the object to improve print quality." -msgstr "Orienta automaticamente l'oggetto per migliorare la qualità di stampa." +msgid "Auto orient the object to improve print quality" +msgstr "Automatiškai nustatoma padėtis spausdinimo kokybės pagerinimui." + +msgid "Edit" +msgstr "Redaguoti" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" msgid "Select All" -msgstr "Seleziona tutto" +msgstr "Pasirinkti viską" msgid "select all objects on current plate" -msgstr "Seleziona tutti gli oggetti sul piatto corrente" +msgstr "pasirinkti visus objektus pasirinktoje plokštėje" msgid "Delete All" -msgstr "Elimina tutto" +msgstr "Ištrinti visus" msgid "delete all objects on current plate" -msgstr "Elimina tutti gli oggetti sul piatto corrente" +msgstr "ištrinti visus objektus pasirinktoje plokštėje" msgid "Arrange" -msgstr "Disponi" +msgstr "Išdėstyti" msgid "arrange current plate" -msgstr "Disponi sul piatto corrente" +msgstr "išdėstyti dabartinės plokštės objektus" msgid "Reload All" -msgstr "" +msgstr "Pakartotinai užkrauti viską" msgid "reload all from disk" -msgstr "" +msgstr "dar kartą užkrauti viską iš disko" msgid "Auto Rotate" -msgstr "Rotazione automatica" +msgstr "Automatinis pasukimas" msgid "auto rotate current plate" -msgstr "Rotazione automatica piatto corrente" +msgstr "utomatiškai pasukti dabartinę plokštę" msgid "Delete Plate" -msgstr "Elimina piatto" +msgstr "Ištrinti plokštę" msgid "Remove the selected plate" -msgstr "Rimuovi il piatto selezionato" +msgstr "Pašalinti pasirinktą plokštę" + +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" msgid "Clone" -msgstr "Clona" +msgstr "Klonuoti" msgid "Simplify Model" -msgstr "Semplifica Modello" +msgstr "Supaprastinti modelį" msgid "Center" -msgstr "Centro" +msgstr "Centras" + +msgid "Drop" +msgstr "Pamiršti" msgid "Edit Process Settings" -msgstr "Modifica le impostazioni del processo" +msgstr "Taisyti proceso nustatymus" + +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" msgid "Edit print parameters for a single object" -msgstr "Modifica i parametri di stampa per singolo oggetto" +msgstr "Taisyti atskiro objekto spausdinimo parametrus" msgid "Change Filament" -msgstr "Cambia filamento" +msgstr "Keisti giją" msgid "Set Filament for selected items" -msgstr "Imposta filamento per gli elementi selezionati" +msgstr "Nsutatyti giją pasirinktiems objektams" msgid "Unlock" -msgstr "Sblocca" +msgstr "Atrakinti" msgid "Lock" -msgstr "Blocca" +msgstr "Užrakinti" msgid "Edit Plate Name" -msgstr "Modifica nome Piatto" +msgstr "Taisyti plokštės pavadinimą" msgid "Name" -msgstr "Nome" +msgstr "Pavadinimas" msgid "Fila." -msgstr "Fila." +msgstr "Gija." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" -msgstr[0] "%1$d Errore riparato" -msgstr[1] "%1$d errors repaired" +msgstr[0] "Ištaisyta %1$d klaida" +msgstr[1] "Ištaisytos %1$d klaidos" +msgstr[2] "Ištaisyta %1$d klaidų" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "Errore: %1$d spigolo non-manifold." -msgstr[1] "Errore: %1$d spigoli non-manifold." +msgstr[0] "Klaida: %1$d neuždara briauna." +msgstr[1] "Klaida: %1$d neuždaros briaunos." +msgstr[2] "Klaida: %1$d neuždarų briaunų." msgid "Remaining errors" -msgstr "Errori rimanenti" +msgstr "Likusios klaidos" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d spigolo non-manifold" -msgstr[1] "%1$d spigoli non-manifold" +msgstr[0] "%1$d neuždara briauna" +msgstr[1] "%1$d neuždaros briaunos" +msgstr[2] "%1$d neuždarų briaunų" -msgid "Right click the icon to fix model object" -msgstr "" -"Fai clic con il pulsante destro del mouse sull'icona per correggere " -"l'oggetto del modello" +msgid "Click the icon to repair model object" +msgstr "Spustelėkite piktogramą, kad pataisytumėte modelio objektą" msgid "Right button click the icon to drop the object settings" msgstr "" -"Fai clic con pulsante destro del mouse sull'icona per eliminare le " -"impostazioni dell'oggetto" +"Dešiniuoju pelės mygtuku spustelėkite piktogramą, kad išskleistumėte objekto " +"nustatymus" msgid "Click the icon to reset all settings of the object" -msgstr "Clicca sull'icona per ripristinare tutte le impostazioni dell'oggetto" +msgstr "Spustelėkite piktogramą, kad atstatytumėte visus objekto nustatymus" msgid "Right button click the icon to drop the object printable property" msgstr "" -"Fai clic con pulsante destro del mouse sull'icona per eliminare le proprietà " -"stampa dell'oggetto" +"Dešiniuoju pelės mygtuku spustelėkite piktogramą, kad išskleistumėte objekto " +"spausdinimo savybių meniu" msgid "Click the icon to toggle printable property of the object" msgstr "" -"Clicca sull'icona per attivare o disattivare le proprietà stampabili " -"dell'oggetto" +"Spustelėkite piktogramą, kad įjungtumėte / išjungtumėte objekto spausdinimo " +"galimybę" msgid "Click the icon to edit support painting of the object" -msgstr "Clicca sull'icona per modificare la pittura del supporto dell'oggetto" +msgstr "Spustelėkite piktogramą, kad redaguotumėte objekto atramų piešimą" msgid "Click the icon to edit color painting of the object" -msgstr "Clicca sull'icona per modificare i colori dell'oggetto" +msgstr "Spustelėkite piktogramą, kad redaguotumėte objekto spalvinimą" msgid "Click the icon to shift this object to the bed" -msgstr "Fare clic sull'icona per spostare l'oggetto sul piano" +msgstr "Spustelėkite piktogramą, kad perkeltumėte šį objektą ant pagrindo" msgid "Loading file" -msgstr "Caricamento file" +msgstr "Įkeliamas failas" msgid "Error!" -msgstr "Errore!" +msgstr "Klaida!" msgid "Failed to get the model data in the current file." -msgstr "Impossibile ottenere i dati del modello nel file corrente." +msgstr "Nepavyko gauti modelio duomenų iš dabartinio failo." msgid "Generic" -msgstr "Generico" +msgstr "Bendras" msgid "Add Modifier" -msgstr "Aggiungi modificatore" +msgstr "Pridėti modifikatorių" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "" -"Passa alla modalità di impostazione oggetto per modificare le impostazioni " -"del modificatore." +"Norėdami redaguoti modifikatoriaus nustatymus, persijunkite į objektų " +"atskirų nustatymų režimą." msgid "" "Switch to per-object setting mode to edit process settings of selected " "objects." msgstr "" -"Passa alla modalità di impostazione oggetto per modificare le impostazioni " -"di processo degli oggetti selezionati." +"Norėdami redaguoti pasirinktų objektų spausdinimo parametrus, persijunkite į " +"objektų atskirų nustatymų režimą." + +msgid "Remove paint-on fuzzy skin" +msgstr "Pašalinti pieštą grublėtą paviršių" msgid "Delete connector from object which is a part of cut" -msgstr "Elimina il connettore dall'oggetto che fa parte del taglio" +msgstr "Pašalinkite jungtį nuo objekto, kuris yra pjūvio dalis" msgid "Delete solid part from object which is a part of cut" -msgstr "Elimina la parte solida dall'oggetto che fa parte del taglio" +msgstr "Ištrinti vientisą objekto dalį, kuri yra pjūvio dalis" msgid "Delete negative volume from object which is a part of cut" -msgstr "Elimina il volume negativo dall'oggetto che fa parte del taglio" +msgstr "Pašalinkite neigiamą tūrį iš pjūvyje esančio objekto" msgid "" "To save cut correspondence you can delete all connectors from all related " "objects." msgstr "" -"Per salvare il taglio corrispondente puoi eliminare tutte le connessioni tra " -"gli oggetti correlati." +"Norėdami nutraukti ryšius, galite ištrinti visus jungtis iš visų susijusių " +"objektų." msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" -"Questa azione interromperà una corrispondenza di taglio.\n" -"In seguito, la coerenza del modello non può essere garantita.\n" +"Šis veiksmas nutrauks sluoksniavimo atitikmenį.\n" +"Po to modelio nuoseklumas negali būti užtikrintas.\n" "\n" -"Per manipolare parti solide o volumi negativi è necessario invalidare prima " -"le informazioni di taglio." +"Norėdami manipuliuoti su vientisomis dalimis arba neigiamais tūriais, " +"pirmiausia turite panaikinti pjūvio informaciją." msgid "Delete all connectors" -msgstr "Elimina tutti i connettori" +msgstr "Ištrinti visas jungtis" msgid "Deleting the last solid part is not allowed." -msgstr "Non è consentita l'eliminazione dell'ultima parte solida." +msgstr "Neleidžiama ištrinti paskutinės ištisinės dalies." -msgid "The target object contains only one part and can not be splited." -msgstr "" -"L'oggetto di destinazione contiene solo una parte e non può essere diviso." +msgid "The target object contains only one part and can not be split." +msgstr "Objektas turi tik vieną dalį ir negali būti padalintas." msgid "Assembly" -msgstr "Assemblaggio" +msgstr "Surinkimas" msgid "Cut Connectors information" -msgstr "Informazioni sui connettori di taglio" +msgstr "Pjovimo jungčių informacija" msgid "Object manipulation" -msgstr "Manipola oggetti" +msgstr "Manipuliavimas objektu" msgid "Group manipulation" -msgstr "Manipola il gruppo" +msgstr "Manipuliavimas grupe" msgid "Object Settings to modify" -msgstr "Impostazioni oggetto da modificare" +msgstr "Keičiami objekto parametrai" msgid "Part Settings to modify" -msgstr "Imposta parti da modificare" +msgstr "Dalies nustatymai keitimui" msgid "Layer range Settings to modify" -msgstr "Impostazioni range layer da modificare" +msgstr "Keičiami sluoksnių ribų nustatymai" msgid "Part manipulation" -msgstr "Manipola parti" +msgstr "Manipuliavimas detale" msgid "Instance manipulation" -msgstr "Manipola istanze" +msgstr "Manipuliavimas egzemplioriumi" msgid "Height ranges" -msgstr "Intervalli di altezza" +msgstr "Aukščio diapazonai" msgid "Settings for height range" -msgstr "Impostazioni intervallo altezza" +msgstr "Aukščio diapazono nustatymai" msgid "Layer" -msgstr "Layer" +msgstr "Sluoksnis" msgid "Selection conflicts" -msgstr "Conflitti di selezione" +msgstr "Pasirinkimo konfliktai" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" -"Se il primo elemento selezionato è un oggetto, anche il secondo deve essere " -"un oggetto." +"Jei pirmasis pasirinktas elementas yra objektas, tuomet ir antrasis privalo " +"būti objektas." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" -"Se il primo elemento selezionato è una parte, il secondo deve far parte " -"dello stesso oggetto." +"Jei pirmasis pasirinktas elementas ira dalis, tuomet antrasis taip pat " +"privalo būti to paties objekto dalis." msgid "The type of the last solid object part is not to be changed." -msgstr "" -"Il tipo dell'ultima parte dell'oggetto solido non può essere modificato." +msgstr "Paskutinės vientiso objekto dalies tipas negali būti keičiamas." msgid "Negative Part" -msgstr "Parte negativa" +msgstr "Neigiama dalis" msgid "Support Blocker" -msgstr "Blocco Supporto" +msgstr "Atramų blokatorius" msgid "Support Enforcer" -msgstr "Rinforzo Supporto" +msgstr "Priverstinės atramos" msgid "Type:" -msgstr "Tipo:" +msgstr "Tipas:" msgid "Choose part type" -msgstr "Scegli tipo di parte" +msgstr "Pasirinkite dalies tipą" msgid "Enter new name" -msgstr "Inserisci un nuovo nome" +msgstr "Įvesti naują pavadinimą" msgid "Renaming" -msgstr "Rinomina" +msgstr "Pervadinama" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "Il seguente oggetto del modello è stato riparato" -msgstr[1] "I seguenti oggetti del modello sono stati riparati" +msgstr[0] "Šis modelio objektas buvo sutaisytas" +msgstr[1] "Šie modelio objektai buvo sutaisyti" +msgstr[2] "Šių modelio objektų buvo sutaisyta" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "Impossibile riparare il seguente oggetto modello" -msgstr[1] "Impossibile riparare i seguenti oggetti modello" +msgstr[0] "Nepavyko pataisyti šio modelio objekto" +msgstr[1] "Nepavyko pataisyti šio modelio objektų" +msgstr[2] "Nepavyko pataisyti šio modelio objektų" msgid "Repairing was canceled" -msgstr "La riparazione è stata annullata" +msgstr "Taisymas buvo atšauktas" msgid "Additional process preset" -msgstr "Preset processo aggiuntivo" +msgstr "Papildomas apdorojimo nustatymas" msgid "Remove parameter" -msgstr "Rimuovi parametro" +msgstr "Pašalinti parametrą" msgid "to" -msgstr "a" +msgstr "į" msgid "Remove height range" -msgstr "Rimuovi intervallo altezza" +msgstr "Pašalinti aukščio ribas" msgid "Add height range" -msgstr "Aggiungi intervallo di altezza" +msgstr "Pridėti aukščio ribas" msgid "Invalid numeric." -msgstr "Numero non valido." +msgstr "Netinkamas skaičius." msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" -"Una cella può essere copiata solo in una o più celle della stessa colonna." +"vieną langelį galima nukopijuoti tik į vieną ar daugiau to paties stulpelio " +"langelių" -msgid "multiple cells copy is not supported" -msgstr "Copia di celle multiple non supportata." +msgid "Copying multiple cells is not supported." +msgstr "Kelių langelių kopijavimas nepalaikomas." msgid "Outside" -msgstr "Esterno" +msgstr "Išorėje" msgid "Layer height" -msgstr "Altezza layer" +msgstr "Sluoksnio aukštis" msgid "Wall loops" -msgstr "Loop pareti" +msgstr "Sienelės linijos" msgid "Infill density(%)" -msgstr "Densità riempimento (%)" +msgstr "Užpildo tankis (%)" msgid "Auto Brim" -msgstr "Auto Brim" +msgstr "Automatinis pagrindo sluoksnis" msgid "Mouse ear" -msgstr "Orecchio di topo" +msgstr "Pelės ausis" + +msgid "Painted" +msgstr "Piešta" msgid "Outer brim only" -msgstr "Solo brim esterno" +msgstr "Tik išorinis kraštas" msgid "Inner brim only" -msgstr "Solo brim interno" +msgstr "Tik vidinis kraštas" msgid "Outer and inner brim" -msgstr "Brim interno e esterno" +msgstr "Išorinis ir vidinis kraštai" msgid "No-brim" -msgstr "No-brim" +msgstr "Nėra pagrindo sluoksnio" msgid "Outer wall speed" -msgstr "Velocità parete esterna" +msgstr "Išorinių sienų greitis" msgid "Plate" -msgstr "Piatto" +msgstr "Plokštė" msgid "Brim" -msgstr "Brim" +msgstr "Kraštas" msgid "Object/Part Setting" -msgstr "Impostazione oggetto/parte" +msgstr "Objekto / Dalies nustatymai" msgid "Reset parameter" -msgstr "Ripristina parametro" +msgstr "Grąžinti į pradinį" msgid "Multicolor Print" -msgstr "Stampa multicolore" +msgstr "Spalvotas spausdinimas" msgid "Line Type" -msgstr "Tipo linea" +msgstr "Linijos tipas" msgid "More" -msgstr "Altro" +msgstr "Daugiau" msgid "Open Preferences." -msgstr "Apri Preferenze." +msgstr "Atidaryti nuostatas." msgid "Open next tip." -msgstr "Apri suggerimento successivo." +msgstr "Kitas patarimas." msgid "Open Documentation in web browser." -msgstr "Aprire la documentazione nel browser web." +msgstr "Atidaryti dokumentaciją žiniatinklio naršyklėje." msgid "Color" -msgstr "Colore" +msgstr "Spalva" msgid "Pause" -msgstr "Pausa" +msgstr "Pristabdyti" msgid "Template" -msgstr "Modello" +msgstr "Šablonas" msgid "Custom" -msgstr "Personalizzato" +msgstr "Pasirinktinis" msgid "Pause:" -msgstr "Pausa:" +msgstr "Pauzė:" msgid "Custom Template:" -msgstr "Template personalizzato:" +msgstr "Pasirinktinis šablonas:" msgid "Custom G-code:" -msgstr "G-code personalizzato:" +msgstr "Pasirinktinis G-kodas:" msgid "Custom G-code" -msgstr "G-code personalizzato" +msgstr "Pasirinktinis G-kodas" msgid "Enter Custom G-code used on current layer:" -msgstr "Inserisci G-code personalizzato utilizzato nel layer corrente:" +msgstr "Įveskite pasirinktinį kodą dabartiniam sluoksniui:" msgid "Jump to Layer" -msgstr "Vai al layer" +msgstr "Peršokti į sluoksnį" msgid "Please enter the layer number" -msgstr "Inserisci numero del layer" +msgstr "Įveskite sluoksnio numerį" msgid "Add Pause" -msgstr "Aggiungi pausa" +msgstr "Pridėti pauzę" msgid "Insert a pause command at the beginning of this layer." -msgstr "Inserisci un comando di pausa all'inizio di questo layer." +msgstr "Įterpti pauzės komandą šio sluoksnio pradžioje." msgid "Add Custom G-code" -msgstr "Aggiungi G-code personalizzato" +msgstr "Pridėti pasirinktinį G-kodą" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Inserisci G-code personalizzato all'inizio di questo layer." +msgstr "Įterpti pasirinktinį G-kodą šio sluoksnio pradžioje." msgid "Add Custom Template" -msgstr "Aggiungi template personalizzato" +msgstr "Pridėti pasirinktinį šabloną" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "" -"Inserisci un template G-code personalizzato all'inizio di questo layer." +msgstr "Įterpti šablono pasirinktinį G-kodą šio sluoksnio pradžioje." msgid "Filament " -msgstr "Filamento " +msgstr "Gija " msgid "Change filament at the beginning of this layer." -msgstr "Cambia filamento all'inizio di questo layer." +msgstr "Pakeisti giją šio sluoksnio pradžioje." msgid "Delete Pause" -msgstr "Elimina pausa" +msgstr "Pašalinti pauzę" msgid "Delete Custom Template" -msgstr "Elimina Template Personalizzato" +msgstr "Pašalinti pasirinktinį šabloną" msgid "Edit Custom G-code" -msgstr "Modifica G-code personalizzato" +msgstr "Taisyti pasirinktinį G-kodą" msgid "Delete Custom G-code" -msgstr "Elimina G-code personalizzato" +msgstr "Ištrinti pasirinktinį G-kodą" msgid "Delete Filament Change" -msgstr "Elimina cambio filamento" +msgstr "Ištrinti gijos keitimą" msgid "No printer" -msgstr "Nessuna stampante" +msgstr "Nepasirinktas spausdintuvas" msgid "..." msgstr "..." msgid "Failed to connect to the server" -msgstr "Connessione al server non riuscita" +msgstr "Nepavyko prisijungti prie serverio" msgid "Check the status of current system services" -msgstr "Verifica lo stato attuale dei servizi di sistema" +msgstr "Patikrinti dabartinių sistemos paslaugų būseną" msgid "code" -msgstr "Codice" +msgstr "kodas" msgid "Failed to connect to cloud service" -msgstr "Connessione al servizio cloud non riuscita" +msgstr "Nepavyko prisijungti prie debesies paslaugos" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Fai clic sul link in alto per visualizzare lo stato del servizio cloud" +msgstr "" +"Spustelėkite nuorodą viršuje, kad pamatytumėte debesies paslaugos būseną" msgid "Failed to connect to the printer" -msgstr "Impossibile connettersi alla stampante" +msgstr "Nepavyko prisijungti prie spausdintuvo" msgid "Connection to printer failed" -msgstr "Connessione stampante fallita" +msgstr "Nepavyko prisijungti prie spausdintuvo" msgid "Please check the network connection of the printer and Orca." -msgstr "Controlla la connessione di rete della stampante e di Studio." +msgstr "Prašome patikrinti spausdintuvo ir Snapmaker Orca ryšį su tinklu." msgid "Connecting..." -msgstr "Connessione..." +msgstr "Jungiamasi..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Vuoto" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Ricarica automatica" - -msgid "AMS not connected" -msgstr "AMS non collegato" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "Įkelti" msgid "Unload" -msgstr "Scarica" - -msgid "Ext Spool" -msgstr "Bobina esterna" - -msgid "Tips" -msgstr "Suggerimenti" - -msgid "Guide" -msgstr "Guida" - -msgid "Retry" -msgstr "Riprova" - -msgid "Calibrating AMS..." -msgstr "Calibrazione AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "" -"Si è verificato un problema durante la calibrazione. Clicca per visualizzare " -"la soluzione." - -msgid "Calibrate again" -msgstr "Calibra di nuovo" - -msgid "Cancel calibration" -msgstr "Annulla calibrazione" - -msgid "Idling..." -msgstr "Minimo..." - -msgid "Heat the nozzle" -msgstr "Riscaldo nozzle" - -msgid "Cut filament" -msgstr "Taglio il filamento" - -msgid "Pull back current filament" -msgstr "Ritiro il filamento corrente" - -msgid "Push new filament into extruder" -msgstr "Inserisco il nuovo filamento nell'estrusore" - -msgid "Purge old filament" -msgstr "Spurgo filamento precedente" - -msgid "Feed Filament" -msgstr "Alimentazione Filamento" - -msgid "Confirm extruded" -msgstr "Conferma estrusione" - -msgid "Check filament location" -msgstr "Controllare la posizione del filamento" - -msgid "Grab new filament" -msgstr "Prendo un nuovo filamento" +msgstr "Išleisti" msgid "" "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " "load or unload filaments." msgstr "" -"Scegliere uno slot AMS, quindi premi il pulsante \"Carica\" o \"Scarica\" " -"per caricare o scaricare automaticamente il filamento." - -msgid "Edit" -msgstr "Modifica" +"Pasirinkite AMS angą, tada paspauskite \"Įkelti\" arba \"išstumti\" mygtuką, " +"kad automatiškai įkeltumėte arba išstumtumėte gijas." msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." msgstr "" -"Tutti gli oggetti selezionati si trovano su una piatto bloccato.\n" -"Non è possibile disporre automaticamente questi oggetti." - -msgid "No arrangable objects are selected." -msgstr "Non sono stati selezionati oggetti ordinabili." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"Changing fan speed during printing may affect print quality, please choose " +"carefully." msgstr "" -"Il piatto è bloccato.\n" -"Non è possibile eseguire la disposizione automatica su questo piatto." + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtras" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Aušinimas" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Viršutinis" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Papild" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "Laisvinama..." + +msgid "Heat the nozzle" +msgstr "Įkaitinti purkštuką" + +msgid "Cut filament" +msgstr "Nukirpti giją" + +msgid "Pull back current filament" +msgstr "Išstumti atgal dabartinę giją" + +msgid "Push new filament into extruder" +msgstr "Įstumti naują giją į ekstruderį" + +msgid "Grab new filament" +msgstr "Pasirinkti naują giją" + +msgid "Purge old filament" +msgstr "Išmesti seną giją" + +msgid "Confirm extruded" +msgstr "Patvirtinti, kad išspausta" + +msgid "Check filament location" +msgstr "Patikrinti gijos padėtį" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." +msgstr "" +"Visi pažymėti objektai yra ant užrakintos plokštės.\n" +"Automatinio išdėstymo šiems objektams atlikti negalima." + +msgid "No arrangeable objects are selected." +msgstr "Nėra pasirinkta jokių tvarkytinų objektų." + +msgid "" +"This plate is locked.\n" +"Cannot auto-arrange on this plate." +msgstr "" +"Ši plokštė užrakinta.\n" +"Automatinio objektų išdėstymo šioje plokštėje atlikti negalima." msgid "Arranging..." -msgstr "Disponendo..." +msgstr "Išdėstoma..." msgid "Arranging" -msgstr "Disposizione" +msgstr "Išdėstymas" msgid "Arranging canceled." -msgstr "Disposizione annullata." +msgstr "Išdėstymas atšauktas." msgid "" "Arranging is done but there are unpacked items. Reduce spacing and try again." msgstr "" -"Disposizione completata, ma non è stato possibile disporre alcuni oggetti. " -"Ridurre lo spazio e riprovare." +"Išdėstymas atliktas, tačiau liko neapdorotų objektų. Sumažinkite tarpus ir " +"pabandykite dar kartą." msgid "Arranging done." -msgstr "Disposizione completata." +msgstr "Išdėstymas atliktas." msgid "" "Arrange failed. Found some exceptions when processing object geometries." -msgstr "" -"Disposizione fallita. Riscontrate eccezioni durante l'elaborazione delle " -"geometrie degli oggetti" +msgstr "Išdėstymas nepavyko. Apdorojant objektų geometriją aptiktos išimtys." #, c-format, boost-format msgid "" @@ -2562,677 +2908,775 @@ msgid "" "bed:\n" "%s" msgstr "" -"La disposizione ha ignorato i seguenti oggetti che non possono entrare in un " -"singolo piano:\n" +"Išdėstymas nepaisė šių objektų, kurie netelpa į vieną pagrindą:\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" -"Tutti gli oggetti selezionati si trovano su un piatto bloccato,\n" -"Non è possibile orientare automaticamente questi oggetti." +"Visi pažymėti objektai yra ant užrakintos plokštės.\n" +"Automatinio objektų suorientavimo šiems objektams atlikti negalima." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" -"Il piatto è bloccato.\n" -"Non puoi orientare automaticamente questo piatto." +"Ši plokštė užrakinta.\n" +"Automatinio objektų orientavimo šioje plokštėje atlikti negalima." msgid "Orienting..." -msgstr "Orientamento..." +msgstr "Orientuojama..." msgid "Orienting" -msgstr "Orientamento" +msgstr "Orientuojama" msgid "Orienting canceled." -msgstr "Orientamento annullato." +msgstr "Orientavimas atšauktas." msgid "Filling" -msgstr "Riempimento" +msgstr "Užpildoma" msgid "Bed filling canceled." -msgstr "Riempimento del piano annullato." +msgstr "Pagrindo užpildymas atšauktas." msgid "Bed filling done." -msgstr "Riempimento del piano completato." +msgstr "Pagrindo užpildymas atliktas." msgid "Searching for optimal orientation" -msgstr "Ricerca orientamento ottimale" +msgstr "Optimalios orientacijos paieška" msgid "Orientation search canceled." -msgstr "Ricerca orientamento annullata." +msgstr "Orientacijos paieška atšaukta." msgid "Orientation found." -msgstr "Trovato orientamento." +msgstr "Orientacija rasta." msgid "Logging in" -msgstr "Accesso in corso" +msgstr "Jungiamasi" msgid "Login failed" -msgstr "Login non riuscito" +msgstr "Prisijungti nepavyko" msgid "Please check the printer network connection." -msgstr "Controlla la connessione rete della stampante." +msgstr "Prašome patikrinti spausdintuvo kompiuterinio tinklo jungtį." msgid "Abnormal print file data. Please slice again." -msgstr "Dati anomali del file di stampa. Eseguire nuovamente l'elaborazione." +msgstr "" +"Nenormalūs spausdinimo failo duomenys. Prašome susluoksniuoti dar kartą." msgid "Task canceled." -msgstr "Attività annullata." +msgstr "Užduotis atšaukta." msgid "Upload task timed out. Please check the network status and try again." -msgstr "Attività di Upload scaduto. Controlla lo stato della rete e riprova." +msgstr "" +"Įkėlimo užduotis viršijo laukimo laiką. Prašome patikrinti tinklo būseną ir " +"bandyti iš naujo." msgid "Cloud service connection failed. Please try again." -msgstr "Connessione al servizio cloud non riuscita. Riprovare." +msgstr "" +"Nepavyko prisijungti prie debesies paslaugos. Prašome bandyti iš naujo." -msgid "Print file not found. please slice again." -msgstr "File di stampa non trovato; si prega di eseguire nuovamente lo slice." +msgid "Print file not found. Please slice again." +msgstr "Nerastas spausdinimo failas. Prašome išsluoksniuoti iš naujo." msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"Il file di stampa supera la dimensione massima consentita (1 GB). Semplifica " -"il modello ed effettua di nuovo lo slice." +"Spausdinimo failas viršija didžiausią leistiną dydį (1GB). Prašome " +"supaprastinti modelį ir išsluoksniuoti iš naujo." msgid "Failed to send the print job. Please try again." -msgstr "Impossibile inviare il lavoro di stampa. Riprova." +msgstr "Nepavyko išsiųsti spausdinimo užduoties. Prašome bandyti iš naujo." msgid "Failed to upload file to ftp. Please try again." -msgstr "Caricamento del file in ftp non riuscito. Riprova." +msgstr "Nepavyko failo įkelti į ftp serverį. Prašome pabandyti iš naujo." msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Controlla lo stato attuale del server Bambu Lab cliccando sul link qui sopra." +"Paspaudę nuorodą viršuje, galite patikrinti aktualią Bambu serverio būseną." msgid "" "The size of the print file is too large. Please adjust the file size and try " "again." msgstr "" -"La dimensione del file di stampa è troppo grande. Modifica la dimensione del " -"file e riprova." +"Spausdinimo failo dydis per didelis. Prašome pakoreguoti dydį ir bandyti " +"pakartotinai." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" -"File di stampa non trovato; elabora nuovamente il file e invia per la stampa." +"Nerastas spausdinimo failas. Prašome dar kartą išsluoksniuoti ir išsiųsti " +"spausdinimui." msgid "" "Failed to upload print file to FTP. Please check the network status and try " "again." msgstr "" -"Impossibile caricare il file di stampa tramite FTP. Controlla lo stato della " -"rete e riprova." +"Nepavyko spausdinimo failo įkelti į FTP serverį. Patikrinkite tinklo būseną " +"ir bandykite dar kartą." msgid "Sending print job over LAN" -msgstr "Invia stampa tramite LAN" +msgstr "Spausdinimo užduotis siunčiama vietiniu tinklu" msgid "Sending print job through cloud service" -msgstr "Invia stampa tramite servizio cloud" +msgstr "Spausdinimo užduotis siunčiama debesies paslauga" msgid "Print task sending times out." -msgstr "Timeout dell'invio dell'attività di stampa." +msgstr "Spausdinimo užduoties siuntimas viršijo nustatytą laiką." msgid "Service Unavailable" -msgstr "Servizio non disponibile" +msgstr "Paslauga negalima" msgid "Unknown Error." -msgstr "Errore sconosciuto." +msgstr "Nežinoma klaida." msgid "Sending print configuration" -msgstr "Invia configurazione di stampa" +msgstr "Siunčiama spausdinimo konfigūracija" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "" -"Inviato con successo. Salta automaticamente alla pagina del dispositivo in %s" +"Sėkmingai išsiųsta. Automatiškai per %s sek. bus pereita į įrenginio puslapį" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -"Inviato con successo. Salterà automaticamente alla pagina successiva in %ss" +"Sėkmingai išsiųsta. Automatiškai per %s sek. bus pereita į kitą puslapį" -msgid "An SD card needs to be inserted before printing via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Prieigos kodas: %s IP adresas: %s" + +msgid "A Storage needs to be inserted before printing via LAN." msgstr "" -"È necessario inserire una scheda microSD prima di stampare tramite LAN." -msgid "Sending gcode file over LAN" -msgstr "Invio file G-code tramite LAN" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "Invia file G-code a scheda microSD" +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "Vietiniu tinklu siunčiamas G-kodo failas" + +msgid "Sending G-code file to SD card" +msgstr "Į SD kortelę siunčiamas G-kodo failas" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" -msgstr "Inviato con successo. Chiudi la pagina corrente in %s s" +msgstr "Sėkmingai išsiųsta. Dabartinis puslapis užsivers po %s sek" -msgid "An SD card needs to be inserted before sending to printer." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." msgstr "" -"È necessario inserire una scheda microSD prima di inviarla alla stampante." msgid "Importing SLA archive" -msgstr "Importa archivio SLA" +msgstr "Importuojamas SLA archyvas" msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"L'archivio SLA non contiene preset. Attivare alcuni preset di stampanti SLA " -"prima di importare l'archivio SLA." +"SLA archyve nėra jokių išankstinių nustatymų. Prieš importuodami SLA " +"archyvą, pirmiausia suaktyvinkite SLA spausdintuvo nustatymą." msgid "Importing canceled." -msgstr "Importazione annullata." +msgstr "Importavimas atšauktas." msgid "Importing done." -msgstr "Importazione eseguita." +msgstr "Importavimas atliktas." msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"L'archivio SLA importato non contiene alcun preset. Gli attuali preset SLA " -"sono stati utilizzati come recupero." +"Importuotame SLA archyve nebuvo jokių išankstinių nustatymų. Dabartiniai SLA " +"nustatymai buvo naudojami kaip atsarginiai." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "" -"Non è possibile caricare un progetto SLA con un oggetto composto da più " -"parti sul piano" +msgstr "Negalite įkelti SLA projekto su kelių dalių objektu ant pagrindo" msgid "Please check your object list before preset changing." -msgstr "Controlla l'elenco oggetto prima di modificare il preset." +msgstr "Prieš keisdami išankstinius nustatymus, patikrinkite objektų sąrašą." msgid "Attention!" -msgstr "Attenzione!" +msgstr "Dėmesio!" msgid "Downloading" -msgstr "Downloading" +msgstr "Atsisiunčiama" msgid "Download failed" -msgstr "Download non riuscito" +msgstr "Atsisiuntimas nepavyko" -msgid "Cancelled" -msgstr "Annullato" +msgid "Canceled" +msgstr "Atšaukta" -msgid "Install successfully." -msgstr "Installato con successo." +msgid "Installed successfully" +msgstr "Sėkmingai įdiegta" msgid "Installing" -msgstr "Installazione" +msgstr "Diegiama" msgid "Install failed" -msgstr "Installazione non riuscita" +msgstr "Diegimas nepavyko" msgid "Portions copyright" -msgstr "Porzioni di copyright" +msgstr "Dalys saugomos autorių teisių" msgid "Copyright" -msgstr "Copyright" +msgstr "Autorių teisės" msgid "License" -msgstr "Licenza" +msgstr "Licencija" msgid "Snapmaker Orca is licensed under " -msgstr "Snapmaker Orca è concesso in licenza con " +msgstr "Snapmaker Orca yra licencijuojama pagal " msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, versione 3" +msgstr "GNU Affero bendroji viešoji licencija, 3 versija" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca sukurtas remiantis PrusaSlicer ir BambuStudio" msgid "Libraries" -msgstr "Librerie" +msgstr "Bibliotekos" msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Questo software utilizza componenti open source il cui copyright e altri " -"diritti di proprietà appartengono ai rispettivi proprietari" +"Ši programinė įranga naudoja atvirojo kodo komponentus, kurių autorių teisės " +"ir kitos nuosavybės teisės priklauso atitinkamiems savininkams" #, c-format, boost-format msgid "About %s" -msgstr "Informazioni su %s" - -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " +msgstr "Apie %s" msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "Snapmaker Orca è basato su BambuStudio, PrusaSlicer e SuperSlicer." +msgstr "Snapmaker Orca sukurtas remiantis BambuStudio, PrusaSlicer ir SuperSlicer." msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "BambuStudio è originariamente basato su PrusaSlicer di PrusaResearch." +msgstr "" +"Pradinė BambuStudio programos kūrimo bazė buvo PrusaSlicer iš PrusaResearch." msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." -msgstr "PrusaSlicer originariamente basato su Slic3r di Alessandro Ranellucci." +msgstr "" +"Pradinė PrusaSlicer programos kūrimo bazė buvo Slic3r, kurį sukūrė " +"Alessandro Ranellucci." msgid "" "Slic3r was created by Alessandro Ranellucci with the help of many other " "contributors." -msgstr "" -"Slic3r è stato creato da Alessandro Ranellucci con l'aiuto di molti altri " -"collaboratori." +msgstr "Slic3r sukūrė Alessandro Ranellucci su daugelio kitų kūrėjų pagalba." msgid "Version" -msgstr "Versione" +msgstr "Versija" msgid "AMS Materials Setting" -msgstr "Impostazione materiali AMS" +msgstr "AMS medžiagų nuostatos" msgid "Confirm" -msgstr "Conferma" +msgstr "Patvirtinti" msgid "Close" -msgstr "Chiudi" - -msgid "Colour" -msgstr "Colore" +msgstr "Uždaryti" msgid "" "Nozzle\n" "Temperature" msgstr "" -"Temperatura\n" -"Nozzle" +"Purkštuko\n" +"temperatūra" msgid "max" -msgstr "max" +msgstr "maks" msgid "min" msgstr "min" #, boost-format msgid "The input value should be greater than %1% and less than %2%" -msgstr "Il valore di input deve essere maggiore di %1% e minore di %2%" +msgstr "Įvesties reikšmė turi būti didesnė nei %1% ir mažesnė nei %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"L'impostazione informazioni sullo slot AMS in fase di stampa non è " -"supportata." - msgid "Factors of Flow Dynamics Calibration" -msgstr "Fattori di calibrazione della dinamica del flusso" +msgstr "Dinaminio srauto kalibravimo veiksniai" msgid "PA Profile" -msgstr "Profilo PA" +msgstr "PA sąranka" msgid "Factor K" -msgstr "Fattore K" +msgstr "Faktorius K" msgid "Factor N" -msgstr "Fattore N" +msgstr "Faktorius N" + +msgid "Setting AMS slot information while printing is not supported" +msgstr "Negalima pakeisti AMS angos informacijos kol vyksta spausdinimas" msgid "Setting Virtual slot information while printing is not supported" msgstr "" -"Non è supportata l’impostazione informazioni dello Slot Virtuale durante la " -"stampa." +"Negalima pakeisti virtualios angos informacijos kol vyksta spausdinimas" msgid "Are you sure you want to clear the filament information?" -msgstr "Sei sicuro di voler cancellare le informazioni del filamento?" +msgstr "Ar jūs tikrai norite išvalyti gijos informaciją?" msgid "You need to select the material type and color first." -msgstr "Devi prima selezionare il tipo e il colore del materiale." +msgstr "Pradžioje jums reikia pasirinkti medžiagos tipą ir spalvą." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "" +msgstr "Įveskite tinkamą reikšmę (K %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" +msgstr "Įveskite tinkamą reikšmę (K %.1f~%.1f, N %.1f~%.1f)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" msgstr "" +msgid "AMS" +msgstr "AMS" + msgid "Other Color" -msgstr "Altro colore" +msgstr "Kita spalva" msgid "Custom Color" -msgstr "Colore personalizzato" +msgstr "Pasirinktinė spalva" msgid "Dynamic flow calibration" -msgstr "Calibrazione dinamica del flusso" +msgstr "Dinaminis srauto kalibravimas" msgid "" "The nozzle temp and max volumetric speed will affect the calibration " "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"La temperatura del nozzle e la velocità volumetrica massima influiranno sui " -"risultati della calibrazione. Inserisci gli stessi valori della stampa " -"effettiva. Possono essere riempiti automaticamente selezionando un filamento " -"dal preset." +"Purkštuko temperatūra ir didžiausias tūrinis greitis įtakoja kalibravimo " +"rezultatus. Prašome įvesti tokias pat reikšmes, kaip ir įprastam " +"spausdinime. Jas galima automatiškai užpildyti pasirinkus gijų parametrų " +"sąranką." msgid "Nozzle Diameter" -msgstr "Diametro Nozzle" +msgstr "Purkštuko diametras" msgid "Bed Type" -msgstr "Tipo di piano" +msgstr "Pagrindo tipas" msgid "Nozzle temperature" -msgstr "Temperatura Nozzle" +msgstr "Purkštuko temperatūra" msgid "Bed Temperature" -msgstr "Temperatura piano" +msgstr "Pagrindo temperatūra" msgid "Max volumetric speed" -msgstr "Massima velocità volumetrica" - -msgid "℃" -msgstr "°C" +msgstr "Maksimalus tūrinis greitis" msgid "Bed temperature" -msgstr "Temperatura piano" - -msgid "mm³" -msgstr "mm³" +msgstr "Pagrindo temperatūra" msgid "Start calibration" -msgstr "Calibra" +msgstr "Pradėti kalibravimą" msgid "Next" -msgstr "Avanti" +msgstr "Kitas" msgid "" "Calibration completed. Please find the most uniform extrusion line on your " "hot bed like the picture below, and fill the value on its left side into the " "factor K input box." msgstr "" -"Calibrazione completata. Trova la linea di estrusione più uniforme sul tuo " -"piatto come nell'immagine sotto e inserisci il valore sul lato sinistro " -"nella casella di immissione del fattore K." +"Kalibravimas baigtas. Raskite tolydžiausiai išspausdintą liniją ant " +"kaitinamo pagrindo, (tokią kaip paveikslėlyje žemiau) ir įveskite kairėje " +"pusėje esančią reikšmę į faktoriaus K įvesties laukelį." msgid "Save" -msgstr "Salva" +msgstr "Išsaugoti" msgid "Last Step" -msgstr "Indietro" +msgstr "Paskutinis žingsnis" msgid "Example" -msgstr "Esempio" +msgstr "Pavyzdys" #, c-format, boost-format msgid "Calibrating... %d%%" -msgstr "Calibrazione in corso... %d%%" +msgstr "Kalibruojama... %d%%" msgid "Calibration completed" -msgstr "Calibrazione completata" +msgstr "Kalibravimas baigtas" #, c-format, boost-format msgid "%s does not support %s" -msgstr "%s non supporta %s" +msgstr "%s nepalaiko %s" msgid "Dynamic flow Calibration" -msgstr "Calibrazione dinamica del flusso" +msgstr "Dinaminio srauto kalibravimas" msgid "Step" -msgstr "Step" +msgstr "Žingsnis" + +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" msgid "AMS Slots" -msgstr "Slot AMS" +msgstr "AMS angos" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "Kairysis AMS" + +msgid "External" +msgstr "Išorinis" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "Dešinysis AMS" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Purkštukas" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Nota: sono selezionabili solo gli slot AMS caricati con lo stesso tipo di " -"materiale." msgid "Enable AMS" -msgstr "Abilita AMS" +msgstr "Įjungti AMS" msgid "Print with filaments in the AMS" -msgstr "Stampa con filamento in AMS" +msgstr "Spausdinti su gijomis iš AMS" msgid "Disable AMS" -msgstr "Disabilita AMS" +msgstr "Išjungti AMS" msgid "Print with the filament mounted on the back of chassis" -msgstr "Stampa filamento con bobina esterna" - -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" +msgstr "Spausdinti su ant dėžės sumontuota gija" msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" +"Pasikeiskite drėgmės sugėriklį, kai jis sudrėgsta. Indikatorius gali veikti " +"netiksliai šiais atvejais: kai atidarytas dangtelis, arba pakeistas drėgmės " +"sugėriklio pakelis. Drėgmės sugėrimui reikia keleto valandų. Žema " +"temperatūra taip pat sulėtina šį procesą." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" -"Configura lo slot AMS da usare per un filamento utilizzato nel lavoro di " -"stampa." +"Sukonfigūruokite, kuris AMS lizdas turėtų būti naudojamas spausdinimo " +"užduotyje naudojamai gijai." msgid "Filament used in this print job" -msgstr "Filamento utilizzato in questa stampa" +msgstr "Šiame spausdinime naudojama gija" msgid "AMS slot used for this filament" -msgstr "Slot AMS utilizzato per questo filamento" +msgstr "Šiam spausdinimui naudojamas AMS lizdas" msgid "Click to select AMS slot manually" -msgstr "Fai clic per selezionare manualmente lo slot AMS" +msgstr "Paspauskite, norėdami rankiniu būdu pasirinkti AMS lizdą" msgid "Do not Enable AMS" -msgstr "AMS non abilitato" +msgstr "Nejungti AMS" msgid "Print using materials mounted on the back of the case" -msgstr "Stampa filamento con bobina esterna." +msgstr "Spausdinkite naudodami išorinėje ritėje esančią giją" -msgid "Print with filaments in ams" -msgstr "Stampa con filamento AMS" +msgid "Print with filaments in AMS" +msgstr "Spausdinti AMS gijomis" msgid "Print with filaments mounted on the back of the chassis" -msgstr "Stampa filamento con bobina esterna" +msgstr "Spausdinti gijomis, sumontuotomis ant dėžės" + +msgid "Auto Refill" +msgstr "Automatinis papildymas" + +msgid "Left" +msgstr "Kairė" + +msgid "Right" +msgstr "Dešinė" msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "" -"Quando si esaurisce il materiale corrente, la stampante continuerà a " -"stampare nel seguente ordine." +"Pasibaigus esamai medžiagai, spausdintuvas toliau spausdins šia tvarka." + +msgid "Identical filament: same brand, type and color" +msgstr "" msgid "Group" -msgstr "Gruppo" +msgstr "Grupė" + +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" msgid "The printer does not currently support auto refill." -msgstr "Attualmente la stampante non supporta la ricarica automatica." +msgstr "Šiuo metu spausdintuvas nepalaiko automatinio papildymo." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." -msgstr "" -"Il backup del filamento AMS non è abilitato, è necessario abilitarlo nelle " -"impostazioni AMS." +msgstr "AMS atsarginė gija neįjungta, įjunkite ją AMS nustatymuose." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Se ci sono due filamenti identici in AMS, il backup del filamento AMS sarà " -"abilitato.\n" -"(Attualmente supporta la fornitura automatica di materiali di consumo con lo " -"stesso marchio, tipo di materiale e colore)" msgid "DRY" -msgstr "DRY" +msgstr "SAUSA" msgid "WET" -msgstr "WET" +msgstr "DRĖGNA" msgid "AMS Settings" -msgstr "Impostazioni AMS" +msgstr "AMS nustatymai" msgid "Insertion update" -msgstr "Aggiornamento dell'inserimento" +msgstr "Įdėklo atnaujinimas" msgid "" "The AMS will automatically read the filament information when inserting a " "new Bambu Lab filament. This takes about 20 seconds." msgstr "" -"L'AMS leggerà automaticamente le informazioni sul filamento quando inserisce " -"una nuova bobina di filamento Bambu Lab. Questa operazione richiede circa 20 " -"secondi." +"Įdėjus naują Bambu Lab giją, AMS automatiškai nuskaitys jos informaciją. Tai " +"trunka apie 20 sekundžių." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" -"Nota: se durante la stampa viene inserito un nuovo filamento, l'AMS non " -"leggerà automaticamente alcuna informazione fino al termine della stampa." +"Pastaba: jei spausdinimo metu įdedama nauja gija, AMS automatiškai " +"nenuskaitys jokios informacijos, kol spausdinimas nebus baigtas." msgid "" "When inserting a new filament, the AMS will not automatically read its " "information, leaving it blank for you to enter manually." msgstr "" -"Quando si inserisce un nuovo filamento, l'AMS non legge automaticamente le " -"sue informazioni, lasciandole vuote per l'inserimento manuale." +"Įdėjus naują giją, AMS automatiškai nenuskaitys jos informacijos, todėl ją " +"reikės įvesti rankiniu būdu." msgid "Power on update" -msgstr "Aggiorna all'avvio" +msgstr "Įjungimo metu atnaujinimas" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" -"L'AMS leggerà automaticamente le informazioni sul filamento inserito " -"all'avvio. Ci vorrà circa 1 minuto. Il processo di lettura farà ruotare le " -"bobine del filamento." +"AMS paleidimo metu automatiškai nuskaitys įdėts gijos informaciją. Tai " +"užtruks apie 1 minutę. Nuskaitymo procesas sukels gijos ritės sukimąsi." msgid "" "The AMS will not automatically read information from inserted filament " "during startup and will continue to use the information recorded before the " "last shutdown." msgstr "" -"L'AMS non leggerà automaticamente le informazioni dal filamento inserito " -"durante l'avvio e continuerà a utilizzare le informazioni registrate prima " -"dell'ultimo spegnimento." +"Paleidimo metu AMS automatiškai nenuskaitys įdėtos gijos informacijos ir " +"toliau naudosis prieš paskutinį išjungimą įrašyta informacija." msgid "Update remaining capacity" -msgstr "Aggiorna capacità residua" +msgstr "Atnaujinti likusį gijos kiekį" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"L'AMS stimerà la capacità residua del filamento Bambu dopo l'aggiornamento " -"delle informazioni. Durante la stampa, la capacità residua verrà aggiornata " -"automaticamente." msgid "AMS filament backup" -msgstr "Backup filamento AMS" +msgstr "AMS atsarginė gija" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" -"L'AMS passerà automaticamente a un altro filamento con stesse proprietà " -"quando il filamento corrente si esaurisce" +"Kai baigsis dabartinė gija, AMS automatiškai tęs darbą kitoje ritėje su " +"tokiomis pačiomis gijos savybėmis." msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "Filamento išspaudimo nebuvimo aptikimas" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." +"Aptikusi užsikimšimą arba gijos gremžimą, taupant laiką ir giją, sistema iš " +"karto sustabdo spausdinimą." msgid "File" -msgstr "File" +msgstr "Failas" msgid "Calibration" -msgstr "Calibrazione" +msgstr "Kalibravimas" msgid "" "Failed to download the plug-in. Please check your firewall settings and vpn " "software, check and retry." msgstr "" -"Impossibile scaricare il plug-in. Controlla le impostazioni del firewall e " -"VPN poi riprova." +"Nepavyko atsisiųsti papildinio. Patikrinkite savo užkardos nustatymus ir VPN " +"programinę įrangą, ir bandykite dar kartą." msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " "by anti-virus software." msgstr "" -"Impossibile installare il plug-in. Verificare se è bloccato o se è stato " -"eliminato dall'antivirus." +"Nepavyko įdiegti papildinio. Patikrinkite, ar jo neblokuoja arba neištrina " +"antivirusinė programinė įranga." msgid "click here to see more info" -msgstr "clicca per ulteriori informazioni" +msgstr "spustelėkite norėdami gauti daugiau informacijos" msgid "Please home all axes (click " -msgstr "Prego fai l'home degli assi (clicca " +msgstr "Prašome sugrąžinti visas ašis į pradinę padėtį (spauskite " msgid "" ") to locate the toolhead's position. This prevents device moving beyond the " "printable boundary and causing equipment wear." msgstr "" -") per individuare la posizione della testa dell'utensile. In questo modo si " -"evita che il dispositivo si sposti oltre il limite stampabile, causando " -"l'usura dell'apparecchiatura." +") norėdami nustatyti spausdinimo galvutės padėtį. Taip išvengiama, kad " +"įrenginys judėtų už spausdinimo srities ir dėvėtųsi." msgid "Go Home" -msgstr "Vai all'origine" +msgstr "Grįžti į pradinę padėtį" msgid "" "A error occurred. Maybe memory of system is not enough or it's a bug of the " "program" msgstr "" -"Si è verificato un errore. È possibile che la memoria del sistema sia " -"esaurita o che si sia verificato un bug." +"Įvyko klaida. Sistemoje galėjo pritrūkti atminties arba įvyko programos " +"klaida" -msgid "Please save project and restart the program. " -msgstr "Salva il progetto e riavvia l'applicazione. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Įvyko lemtinga klaida: „%1%“" -msgid "Processing G-Code from Previous file..." -msgstr "Elaborazione G-Code dal file precedente..." +msgid "Please save project and restart the program." +msgstr "Išsaugokite projektą ir iš naujo paleiskite programą." + +msgid "Processing G-code from Previous file..." +msgstr "Vykdomas G-kodas iš prieš tai buvusio failo..." msgid "Slicing complete" -msgstr "Slicing completato" +msgstr "Sluoksniavimas baigtas" msgid "Access violation" -msgstr "Violazione di accesso" +msgstr "Prieigos pažeidimas" msgid "Illegal instruction" -msgstr "Istruzione illegale" +msgstr "Netinkama komanda" msgid "Divide by zero" -msgstr "Dividi per zero" +msgstr "Dalyba iš nulio" msgid "Overflow" -msgstr "Sovra-estrusione" +msgstr "Perpildymas" msgid "Underflow" -msgstr "Sotto-estrusione" +msgstr "Perteklius" msgid "Floating reserved operand" -msgstr "Floating reserved operand" +msgstr "Slankusis rezervuotas operandas" msgid "Stack overflow" -msgstr "Stack overflow" +msgstr "Steko perpildymas" msgid "Running post-processing scripts" -msgstr "Esecuzione script di post-elaborazione" +msgstr "Vykdomi papildomo apdorojimo scenarijai" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "Sėkmingai vykdytas papildomas apdorojimo scenarijus" -msgid "Unknown error occured during exporting G-code." -msgstr "" -"Si è verificato un errore sconosciuto durante l'esportazione del G-code." +msgid "Unknown error occurred during exporting G-code." +msgstr "Eksportuojant G kodą įvyko nežinoma klaida." #, boost-format msgid "" @@ -3240,9 +3684,9 @@ msgid "" "card is write locked?\n" "Error message: %1%" msgstr "" -"Copia del G-code temporaneo sul G-code di uscita non riuscita. Forse la " -"scheda SD è bloccata in scrittura?\n" -"Messaggio di errore: %1%" +"Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gal draudžiama " +"įrašinėti į SD kortelę?\n" +"Klaidos pranešimas: %1%" #, boost-format msgid "" @@ -3250,428 +3694,204 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" -"Copia del G-code temporaneo nel G-code di output non riuscita. Potrebbe " -"esserci un problema nel dispositivo di destinazione, prova una nuova " -"esportazione con un dispositivo diverso. Il file G-code corrotto è su %1%." -"tmp." +"Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gali kilti " +"problemų dėl tikslinio įrenginio. Bandykite eksportuoti dar kartą arba " +"naudokite kitą įrenginį. Sugadintas išvesties G-kodas yra %1%.tmp." #, boost-format msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" -"Non è stato possibile rinominare il G-code dopo la copia nella cartella di " -"destinazione selezionata. Il percorso corrente è %1%.tmp. Prova a esportare " -"di nuovo." +"Nepavyko pervardyti G-kodo nukopijavus į pasirinktą aplanką. Dabartinis " +"kelias yra %1%.tmp. Bandykite eksportuoti dar kartą." #, boost-format msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"Copia del G-code temporaneo completata ma non è stato possibile aprire il " -"codice originale su %1% durante il controllo copia. Il G-code di output è su " -"%2%.tmp." +"Laikinojo G-kodo kopijavimas baigtas, bet pradinio kodo, esančio %1%, " +"nepavyko atidaryti tikrinant kopiją. Išvesties G-kodas yra %2%.tmp." #, boost-format msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"Copia del G-code temporaneo completata ma non è stato possibile aprire il " -"codice esportato durante il controllo copia. Il G-code di output è su %1%." -"tmp." +"Laikinojo G-kodo kopijavimas baigtas, bet eksportuoto kodo nepavyko " +"atidaryti tikrinant kopiją. Išvesties G-kodas yra %1%.tmp." #, boost-format msgid "G-code file exported to %1%" -msgstr "G-code esportato in %1%" +msgstr "G-kodo failas eksportuotas į %1%" -msgid "Unknown error when export G-code." -msgstr "Errore sconosciuto nell'esportazione del G-code." +msgid "Unknown error when exporting G-code." +msgstr "Nežinoma G kodo eksporto klaida." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"Impossibile salvare il file del G-code.\n" -"Messaggio di errore: %1%.\n" -"File sorgente %2%." +"Nepavyko išsaugoti G-kodo failo.\n" +"Klaidos pranešimas: %1%.\n" +"Šaltinio failas: %2%." msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Copia del G-code temporaneo nel G-code di output non riuscita." +msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" -"Programmazione del caricamento su `%1%`. Vedere finestra -> Coda di " -"caricamento Host di Stampa" - -msgid "Device" -msgstr "Dispositivo" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "Vista" - -msgid "N/A" -msgstr "N/D" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Aggiungi" - -msgid "Idle" -msgstr "Inattivo" - -msgid "Printing" -msgstr "Stampa" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Non compatibile" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Prepara" - -msgid "Slicing" -msgstr "Slicing" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Invio…" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Continua" - -msgid "Stop" -msgstr "Ferma" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Caricamento…" - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Preparazione lavoro di stampa" - -msgid "Abnormal print file data. Please slice again" -msgstr "Dati file di stampa anormali. Eseguire nuovamente l'elaborazione" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Livellamento piano" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Invia" - -msgid "Name is invalid;" -msgstr "Nome non valido;" - -msgid "illegal characters:" -msgstr "Caratteri illegali:" - -msgid "illegal suffix:" -msgstr "Suffisso illegale:" - -msgid "The name is not allowed to be empty." -msgstr "Il campo nome non può essere vuoto." - -msgid "The name is not allowed to start with space character." -msgstr "Il nome non può iniziare con uno spazio." - -msgid "The name is not allowed to end with space character." -msgstr "Il nome non può terminare con uno spazio." - -msgid "The name length exceeds the limit." -msgstr "La lunghezza del nome supera il limite." +"Planuojamas įkėlimas į „%1%“. Žr. Langas -> Tinklinio spausdinimo įkėlimo " +"eilė" msgid "Origin" -msgstr "Origine" +msgstr "Pradžia" msgid "Size in X and Y of the rectangular plate." -msgstr "Dimensioni X e Y del piano rettangolare." +msgstr "Stačiakampės plokštės dydis X ir Y." msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" -"Distanza della coordinata 0,0 del G-code dall'angolo frontale sinistro del " -"rettangolo." +"0,0 G-kodo koordinatės atstumas nuo priekinio kairiojo stačiakampio kampo." msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" -"Diametro del piano di stampa. Si presume che l'origine (0,0) si trovi al " -"centro." +"Spausdinimo pagrindo skersmuo. Daroma prielaida, kad pradžia (0,0) yra " +"centre." msgid "Rectangular" -msgstr "Rettangolare" +msgstr "Stačiakampis" msgid "Circular" -msgstr "Circolare" +msgstr "Apvalus" msgid "Load shape from STL..." -msgstr "Carica forma da STL..." +msgstr "Įkelti formą iš STL..." msgid "Settings" -msgstr "Impostazioni" +msgstr "Nustatymai" msgid "Texture" -msgstr "Texture" +msgstr "Tekstūra" msgid "Remove" -msgstr "Rimuovi" +msgstr "Pašalinti" msgid "Not found:" -msgstr "Non trovato:" +msgstr "Nerasta:" msgid "Model" -msgstr "Modello" +msgstr "Modelis" msgid "Choose an STL file to import bed shape from:" -msgstr "Scegli un file STL da cui importare la forma del piano:" +msgstr "Pasirinkite STL failą, iš kurio norite importuoti pagrindo formą:" msgid "Invalid file format." -msgstr "Formato file non valido." +msgstr "Netinkamas failo formatas." msgid "Error! Invalid model" -msgstr "Errore! Modello non valido" +msgstr "Klaida! Netinkamas modelis" msgid "The selected file contains no geometry." -msgstr "Il file selezionato non contiene geometrie." +msgstr "Pasirinktame faile nėra geometrijos." msgid "" "The selected file contains several disjoint areas. This is not supported." -msgstr "" -"Il file selezionato contiene molteplici aree disgiunte. Non è supportato." +msgstr "Pasirinktame faile yra keletas nesusijusių sričių. Tai nepalaikoma." msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" -"Seleziona un file da cui importare la forma del piano di stampa (PNG/SVG):" +"Pasirinti failą, iš kurio norite importuoti pagrindo tekstūrą (PNG / SVG):" msgid "Choose an STL file to import bed model from:" -msgstr "Scegli un file STL da cui importare il modello del piano:" +msgstr "Pasirinkite STL failą, iš kurio norite importuoti pagrindo modelį:" msgid "Bed Shape" -msgstr "Forma Piano" +msgstr "Pagrindo forma" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"La temperatura minima consigliata è inferiore a 190 gradi o la temperatura " -"massima consigliata è superiore a 300 gradi.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" +"Rekomenduojama minimali temperatūra negali būti aukštesnė už rekomenduojamą " +"maksimalią temperatūrą.\n" msgid "Please check.\n" -msgstr "Controlla.\n" +msgstr "Prašome patikrinti.\n" msgid "" "Nozzle may be blocked when the temperature is out of recommended range.\n" "Please make sure whether to use the temperature to print.\n" "\n" msgstr "" -"Il Nozzle potrebbe intasarsi quando la temperatura non rientra " -"nell'intervallo consigliato.\n" -"Assicurarsi di utilizzare questa temperatura per la stampa.\n" +"Spausdinimo galvutė gali užsikimšti, jei temperatūra nėra rekomenduojamose " +"ribose.\n" +"Pasitikrinkite, ar tikrai norite spausdinti šia temperatūra.\n" "\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"La temperatura del nozzle consigliata per questo filamento è [%d, %d] gradi " -"centigradi" +"Rekomenduojama šio tipo gijos spausdinimo temperatūra yra nuo %d iki %d " +"laipsnių Celsijaus." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" -"Velocità volumetrica massima troppo bassa.\n" -"Il valore è stato ripristinato a 0,5" +"Per mažas maksimalus tūrinis greitis.\n" +"Atstatyta į 0,5." #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"L'attuale temperatura della camera è superiore alla temperatura di sicurezza " -"del materiale, può causare l'ammorbidimento e l'intasamento del materiale. " -"La temperatura massima di sicurezza per il materiale è %d" +"Dabartinė kameros temperatūra yra aukštesnė už saugią medžiagos temperatūrą, " +"dėl to medžiaga gali suminkštėti ir užkimšti spausdinimo galvutę. Maksimali " +"saugi medžiagos temperatūra yra %d laipsnių Celsijaus" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" -"Altezza del layer troppo piccola\n" -"È stata ripristinata a 0,2" +"Per mažas sluoksnio aukštis.\n" +"Atstatyta į 0,2." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" -"Spaziatura stiratura troppo piccola\n" -"È stata ripristinata a 0,1" +"Per mažas lyginimo tarpas.\n" +"Atstatyta į 0,1." msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" -"L'altezza zero primo layer non è valida.\n" +"Netinkamas pradinio sluoksnio aukštis.\n" "\n" -"L'altezza primo layer verrà ripristinata a 0,2." +"Pirmojo sluoksnio aukštis bus atstatytas į 0,2." msgid "" "This setting is only used for model size tunning with small value in some " @@ -3681,13 +3901,12 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"Questa viene utilizzata solo per regolare le dimensioni del modello in " -"piccole quantità.\n" -"Ad esempio, quando le dimensioni del modello presentano piccoli errori o " -"quando le tolleranze non sono corrette. Per regolazioni di grandi " -"dimensioni, si prega di utilizzare la funzione di scala del modello.\n" +"Šis nustatymas naudojamas tik nedideliu mastu koreguoti modelio dydį tam " +"tikrais atvejais.\n" +"Pavyzdžiui, kai modelio dydis turi nedidelę paklaidą ir jį sunku surinkti.\n" +"Didelio dydžio koregavimui naudokite modelio mastelio keitimo funkciją.\n" "\n" -"Il valore verrà reimpostato su 0." +"Ši vertė bus atstatyta į 0." msgid "" "Too large elephant foot compensation is unreasonable.\n" @@ -3696,30 +3915,30 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"Il valore di compensazione del piede di elefante è troppo grande.\n" -"Se i problemi zampa d'elefante sono significativi, controllare altre " -"impostazioni.\n" -"Ad esempio, la temperatura del piano potrebbe essere troppo alta.\n" +"Per didelė dramblio pėdos kompensacija yra nepagrįsta.\n" +"Jei iš tikrųjų pasireiškia rimtas dramblio pėdos efektas, patikrinkite kitus " +"nustatymus.\n" +"Pavyzdžiui, ar pagrindo temperatūra nėra per aukšta.\n" "\n" -"Il valore viene riportato a 0." +"Reikšmė bus atstatyta į 0." msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"Parete Aggiuntiva Alternativa on funziona bene quando Garantisci spessore " -"verticale del guscio è impostato su Tutto. " +"Papildoma alternatyvi sienelė neveikia gerai, kai vertikalaus apvalkalo " +"storis nustatytas į Visi." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" -"Modificare automaticamente queste impostazioni? \n" -"Sì - Modifica Garantisci spessore verticale del guscio a Moderato e abilita " -"Parete Aggiuntiva Alternativa\n" -"No - Non utilizzare Parete Aggiuntiva Alternativa" +"Automatiškai pakeisti šiuos nustatymus?\n" +"Taip - pakeiskite vertikalaus apvalkalo storį į vidutinį ir įjunkite " +"pakaitinę papildomą sienelę\n" +"Ne - nenaudoti alternatyvios papildomos sienelės" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3728,11 +3947,12 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"Prime tower non funziona quando layer Adattativo o Altezza supporto Layer " -"indipendente sono attivati.\n" -"Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni layer Adattativo e Altezza supporto Layer indipendente" +"Valymo bokštas neveikia, kai įjungtas \"Adaptyvus sluoksnio aukštis\" arba " +"\"Nepriklausomas atramų sluoksnio aukštis\".\n" +"Ką norite išlaikyti?\n" +"TAIP - Išlaikyti valymo bokštą\n" +"NE - Išlaikyti \"Adaptyvų sluoksnio aukštį\" ir \"Nepriklausomą atramų " +"sluoksnio aukštį\"" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3740,10 +3960,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"Prime tower non funziona quando layer adattativo è attivo.\n" -"Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni l'ayer adattativo" +"Valymo bokštas neveikia, kai įjungtas \"Adaptyvus sluoksnio aukštis\".\n" +"Ką norite išlaikyti?\n" +"TAIP - Išlaikyti valymo bokštą\n" +"NE - Išlaikyti \"Adaptyvų sluoksnio aukštį\"" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" @@ -3751,329 +3971,484 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"Prime tower non funziona quando Altezza Supporto Layer indipendente è " -"attiva.\n" -"Quale vuoi tenere?\n" -"SÌ - Mantieni Prime Tower\n" -"NO - Mantieni Altezza Supporto Layer indipendente" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Durante la stampa per oggetto, il Nozzle potrebbe urtare lo skirt.\n" -"Quindi, ripristina il layer skirt su 1 per evitare collisioni." +"Valymo bokštas neveikia, kai įjungtas \"Nepriklausomas atramų sluoksnio " +"aukštis\".\n" +"Ką norite išlaikyti?\n" +"TAIP - Išlaikyti valymo bokštą\n" +"NE - Išlaikyti \"Nepriklausomą atramų sluoksnio aukštį\"" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" -"seam_slope_start_height deve essere inferiore a layer_heightReimpostare a 0." +"seam_slope_start_height turi būti mažesnis nei layer_height.\n" +"Atstatoma į 0." + +#, fuzzy, c-format, boost-format +msgid "" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"Fiksavimo gylis turėtų būti mažesnis už paviršiaus gylį.\n" +"Atstatykite iki 50 % paviršiaus gylio." msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Abu „Grublėto paviršiaus“ režimai – „Išspaudimas“ ir „kombinuotasis“ – " +"reikalauja, kad būtų įjungtas „Arachnės Sienų Generatorius“." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Automatiškai pakeisti šiuos nustatymus?\n" +"Taip – įjungti „Arachnės Sienų Generatorių“\n" +"Ne – išjungti „Arachnės Sienų Generatorių“ ir nustatyti „Grublėtas " +"paviršius“ [Perkėlimas] režimą" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"La modalità spirale funziona solo quando il valore loop parete è 1, il " -"supporto è disabilitato, i il valore dei layer superiori del guscio è 0, la " -"densità riempimento è 0 e il tipo di timelapse è tradizionale." msgid " But machines with I3 structure will not generate timelapse videos." -msgstr " Ma le macchine con la struttura I3 non genereranno video timelapse." +msgstr "" +" Tačiau spausdintuvai su I3 konstrukcija negeneruos pakadrinių vaizdo įrašų." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Modificare queste impostazioni automaticamente? \n" -"Si - Modifica queste impostazioni ed abilita la modalità spirale/vaso\n" -"No - Annulla l'attivazione della modalità a spirale" +"Ar pakeisti šiuos nustatymus automatiškai?\n" +"Taip - Pakeisti nurodytus parametrus ir automatiškai įjungti spiralės " +"režimą.\n" +"Ne - Šį kartą nenaudoti spiralės režimo" + +msgid "Printing" +msgstr "Spausdinimas" msgid "Auto bed leveling" -msgstr "Livellamento automatico piano" +msgstr "Automatinis spausdinimo pagrindo lyginimas" msgid "Heatbed preheating" -msgstr "Preriscaldamento del piano" +msgstr "Spausdinimo pagrindo pašildymas iš anksto" -msgid "Sweeping XY mech mode" -msgstr "Modalità Sweeping XY mech" +msgid "Vibration compensation" +msgstr "Vibracijos kompensacija" msgid "Changing filament" -msgstr "Cambio filamento" +msgstr "Gijos keitimas" msgid "M400 pause" -msgstr "M400 pausa" +msgstr "M400 pauzė" -msgid "Paused due to filament runout" -msgstr "Pausa per filamento esaurito" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Riscaldamento hotend" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Calibrazione estrusione" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" -msgstr "Scansione superfice piatto" +msgstr "Skenuojamas pagrindo paviršius" msgid "Inspecting first layer" -msgstr "Ispezione del primo layer" +msgstr "Tikrinamas pirmasis sluoksnis" msgid "Identifying build plate type" -msgstr "Identificazione tipo piatto di stampa" +msgstr "Identifikuojamas plokštės tipas" msgid "Calibrating Micro Lidar" -msgstr "Calibrazione Micro Lidar" +msgstr "Kalibruojamas mikro lidaras" msgid "Homing toolhead" -msgstr "Homing testa di stampa" +msgstr "Galvutės grąžinimas į pradinę padėtį" msgid "Cleaning nozzle tip" -msgstr "Pulizia nozzle" +msgstr "Purkštuko galiuko valymas" msgid "Checking extruder temperature" -msgstr "Controllo temperatura dell'estrusore" +msgstr "Tikrinama ekstruderio temperatūra" -msgid "Printing was paused by the user" -msgstr "Stampa messa in pausa dall'utente" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pausa caduta cover anteriore" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" -msgstr "Calibrazione micro lidar" +msgid "Calibrating the micro lidar" +msgstr "Mikro lidaro kalibravimas" -msgid "Calibrating extrusion flow" -msgstr "Calibrazione flusso estrusore" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pausa per malfunzionamento temperatura nozzle" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pausa per malfunzionamento della temperatura piano termico" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" -msgstr "Scarico del filamento" +msgstr "Gija išstumiama" -msgid "Skip step pause" -msgstr "Salta la pausa del passaggio" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" -msgstr "Caricamento del filamento" +msgstr "Gija įtraukiama" -msgid "Motor noise calibration" -msgstr "Calibrazione del rumore del motore" +msgid "Motor noise cancellation" +msgstr "Variklių garso sumažinimas" -msgid "Paused due to AMS lost" -msgstr "Sospeso a causa della perdita di AMS" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Pausa dovuta alla bassa velocità della ventola del termocontrollo" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Pausa a causa di un errore di controllo della temperatura della camera" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" -msgstr "Raffreddamento della camera" +msgstr "Aušinama kamera" -msgid "Paused by the Gcode inserted by user" -msgstr "Messo in pausa dal Gcode inserito dall'utente" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" -msgstr "Evidente rumorosità del rumore" +msgstr "Variklio triukšmo demonstravimas" -msgid "Nozzle filament covered detected pause" -msgstr "Pausa quando viene rilevato un nozzle coperto di filamenti" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pausa in caso di errore di taglio" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Pausa in caso di errore nel primo layer" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pausa in caso di intasamento del nozzle" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" -msgstr "Sconosciuto" - -msgid "Fatal" -msgstr "Irreversibile" - -msgid "Serious" -msgstr "Serio" - -msgid "Common" -msgstr "Comune" +msgstr "Nežinomas" msgid "Update successful." -msgstr "Aggiornamento riuscito." +msgstr "Atnaujinimas sėkmingas." msgid "Downloading failed." -msgstr "Download fallito." +msgstr "Parsisuntimas nepavyko." msgid "Verification failed." -msgstr "Verifica fallita." +msgstr "Patikrinimas nepavyko." msgid "Update failed." -msgstr "Aggiornamento fallito." +msgstr "Atnaujinimas nepavyko." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +#, fuzzy msgid "" "The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" "TPU) is not allowed to be loaded." msgstr "" -"La temperatura attuale della camera o la temperatura target della camera " -"supera i 45℃. Per evitare l'intasamento dell'estrusore, non è consentito " -"caricare filamenti a bassa temperatura (PLA/PETG/TPU)." +"Dabartinė kameros temperatūra arba tikslinė kameros temperatūra viršija " +"45 ℃. Norint išvengti ekstruderio užsikimšimo, negalima įkelti žemos " +"temperatūros gijų (PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Nell'estrusore viene caricato un filamento a bassa temperatura (PLA/PETG/" -"TPU). Per evitare l'intasamento dell'estrusore, non è consentito impostare " -"una temperatura della camera superiore a 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" -"Quando si imposta la temperatura della camera al di sotto di 40°C, il " -"controllo della temperatura della camera non verrà attivato. La temperatura " -"target della camera sarà automaticamente impostata su 0℃." +"Nustačius kameros temperatūrą žemesnę nei 40 ℃, kameros temperatūros " +"valdymas nebus aktyvuotas. Automatiniu būdu tikslinė kameros temperatūra bus " +"nustatyta į 0 ℃." -msgid "Failed to start printing job" -msgstr "Impossibile avviare il processo di stampa" +msgid "Failed to start print job" +msgstr "Nepavyko pradėti spausdinimo" msgid "" "This calibration does not support the currently selected nozzle diameter" msgstr "" -"Questa calibrazione non supporta il diametro del nozzle attualmente " -"selezionato" +"Ši kalibravimo procedūra nepalaiko šiuo metu pasirinkto purkštuko skersmens" msgid "Current flowrate cali param is invalid" -msgstr "Il parametro cali della portata corrente non è valido" +msgstr "Dabartinis ekstruzijos srauto kalibravimo parametras yra neteisingas" msgid "Selected diameter and machine diameter do not match" -msgstr "Il diametro selezionato e il diametro della macchina non corrispondono" +msgstr "Pasirinktas diametras ir įrenginio diametras nesutampa" -msgid "Failed to generate cali gcode" -msgstr "Impossibile generare cali gcode" +msgid "Failed to generate cali G-code" +msgstr "Nepavyko sugeneruoti kalibravimo G-kodo" msgid "Calibration error" -msgstr "Errore di calibrazione" +msgstr "Kalibravimo klaida" -msgid "TPU is not supported by AMS." -msgstr "Il TPU non è supportato da AMS." +msgid "Resume Printing" +msgstr "Tęsti spausdinimą" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF non è supportato da AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Damp PVA diventerà flessibile e rimarrà bloccato all'interno di AMS, si " -"prega di fare attenzione ad asciugarlo prima dell'uso." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Nutraukti spausdinimą" + +msgid "Check Assistant" +msgstr "Patikrinimo asistentas" + +msgid "Filament Extruded, Continue" +msgstr "Gijos išspaustos, tęsti" + +msgid "Not Extruded Yet, Retry" +msgstr "Dar neišspausta, bandykite dar kartą" + +msgid "Finished, Continue" +msgstr "Baigta, Tęsti" + +msgid "Load Filament" +msgstr "Įdėti giją" + +msgid "Filament Loaded, Resume" +msgstr "Įdėta gija, tęsti" + +msgid "View Liveview" +msgstr "Peržiūrėti tiesioginį vaizdą" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Atlikta" + +msgid "Retry" +msgstr "Kartoti" + +msgid "Resume" +msgstr "Pratęsti" + +msgid "Unknown error." msgstr "" -"I filamenti CF / GF sono duri e fragili, è facile rompersi o rimanere " -"bloccati in AMS, si prega di usare con cautela." msgid "default" -msgstr "predefinito" +msgstr "numatytas" #, boost-format msgid "Edit Custom G-code (%1%)" -msgstr "Modifica G-code personalizzato (%1%)" +msgstr "Redaguoti pasirinktinį G-kodą (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -"Placeholder incorporati (fai doppio clic sull'elemento per aggiungerlo al G-" -"code)" +"Integruoti G-kodo fragmentai (dukart spustelėkite elementą, kad įterptumėte " +"į G-kodą)" -msgid "Search gcode placeholders" -msgstr "" +msgid "Search G-code placeholders" +msgstr "Ieškoti G-kodo elementų" msgid "Add selected placeholder to G-code" -msgstr "Aggiungi il placeholder selezionato al G-code" +msgstr "Įtraukti pasirinktą elementą į G-kodą" msgid "Select placeholder" -msgstr "Seleziona placeholder" +msgstr "Pasirinkti elementą" msgid "[Global] Slicing State" -msgstr "" +msgstr "[Globali] Sluoksniavimo būsena" msgid "Read Only" -msgstr "" +msgstr "Tik skaitoma" msgid "Read Write" -msgstr "" +msgstr "Skaityti ir rašyti" msgid "Slicing State" -msgstr "" +msgstr "Sluoksniavimo būsena" msgid "Print Statistics" -msgstr "Statistiche di Stampa" +msgstr "Spausdinimo statistika" msgid "Objects Info" -msgstr "" +msgstr "Objekto informacija" msgid "Dimensions" -msgstr "Dimensioni" +msgstr "Išmatavimai" msgid "Temperatures" -msgstr "Temperature" +msgstr "Temperatūros" msgid "Timestamps" -msgstr "Timestamp" +msgstr "Laiko žymės" #, boost-format msgid "Specific for %1%" -msgstr "Specifico per %1%" +msgstr "Būdingas %1%" msgid "Presets" -msgstr "Preset" +msgstr "Profiliai" msgid "Print settings" -msgstr "Impostazioni di stampa" +msgstr "Spausdinimo nustatymai" msgid "Filament settings" -msgstr "Impostazioni Filamento" +msgstr "Gijos parametrai" msgid "SLA Materials settings" -msgstr "Impostazioni Materiali SLA" +msgstr "SLA medžiagų parametrai" msgid "Printer settings" -msgstr "Impostazioni stampante" +msgstr "Spausdintuvo nustatymai" msgid "parameter name" -msgstr "nome parametro" +msgstr "parametro pavadinimas" #, c-format, boost-format -msgid "%s can't be percentage" -msgstr "%s non può essere una percentuale" +msgid "%s can't be a percentage" +msgstr "%s negali būti procentai" #, c-format, boost-format msgid "Value %s is out of range, continue?" -msgstr "Il valore %s non rientra nell'intervallo, continuare?" +msgstr "Dydis %s netelpa į ribas. Tęsti?" msgid "Parameter validation" -msgstr "Validazione parametri" +msgstr "Parametrų patvirtinimas" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "Dydis %s netelpa į ribas. Tinkami dydžiai yra nuo %d iki %d." msgid "Value is out of range." -msgstr "Valore fuori intervallo." +msgstr "Dydis netelpa į ribas." #, c-format, boost-format msgid "" @@ -4081,923 +4456,1158 @@ msgid "" "YES for %s%%, \n" "NO for %s %s." msgstr "" -"Is it %s%% or %s %s?\n" -"YES for %s%%, \n" -"NO for %s %s." +"Ar tai %s%% ar %s %s?\n" +"TAIP %s%%, \n" +"NE %s %s." #, boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" -"Formato di input non valido. Vettore di dimensioni previsto nel seguente " -"formato: \"%1%\"" +"Netinkamas įvesties formatas. Numatytas matmenų vektorius tokiu formatu: " +"\"%1%\"" msgid "Input value is out of range" -msgstr "Valore input fuori portata" +msgstr "Įvesties vertė viršija ribas" msgid "Some extension in the input is invalid" -msgstr "Alcune estensioni nell'input non sono valide" +msgstr "Kai kurie įvesties plėtiniai yra netinkami" + +msgid "This parameter expects a valid template." +msgstr "Šis parametras reikalauja galiojančio šablono." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" +"Neteisingas šablonas. Naudokite N, N#K arba kableliais atskirtą sąrašą su " +"pasirinktiniu #K kiekvienam įrašui. Pavyzdžiai: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "Formato non valido. Formato vettoriale previsto: \"%1%\"" +msgstr "Netinkamas formatas. Tinkamas vektorinis formatas: \"%1%\"" + +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "Pasirinkite" + +msgid "Summary" +msgstr "" msgid "Layer Height" -msgstr "Altezza layer" +msgstr "Sluoksnio aukštis" msgid "Line Width" -msgstr "Larghezza linea" +msgstr "Linijos plotis" msgid "Fan Speed" -msgstr "Velocità ventola" - -msgid "Temperature" -msgstr "Temperatura" +msgstr "Ventiliatoriaus greitis" msgid "Flow" -msgstr "Flusso" +msgstr "Srautas" msgid "Tool" -msgstr "Strumento" +msgstr "Įrankis" msgid "Layer Time" -msgstr "Tempo layer" +msgstr "Sluoksnio laikas" msgid "Layer Time (log)" -msgstr "Tempo layer (log)" +msgstr "Sluoksnio laikas (log)" msgid "Height: " -msgstr "Altezza: " +msgstr "Aukštis: " msgid "Width: " -msgstr "Larghezza: " +msgstr "Plotis: " msgid "Speed: " -msgstr "Velocità: " +msgstr "Greitis: " msgid "Flow: " -msgstr "Flusso: " +msgstr "Srautas: " msgid "Layer Time: " -msgstr "Tempo layer: " +msgstr "Sluoksnio laikas: " msgid "Fan: " -msgstr "Velocità ventola: " +msgstr "Ventiliatorius: " msgid "Temperature: " -msgstr "Temperatura: " +msgstr "Temperatūra: " -msgid "Loading G-codes" -msgstr "Caricamento del G-code" +msgid "Loading G-code" +msgstr "Įkeliami G-kodai" msgid "Generating geometry vertex data" -msgstr "Generazione dati vertici geometria" +msgstr "Geometrijos viršūnių duomenų generavimas" msgid "Generating geometry index data" -msgstr "Generazione dati di indice geometrico" +msgstr "Geometrijos indeksų duomenų generavimas" msgid "Statistics of All Plates" -msgstr "Statistiche di tutti i piatti" +msgstr "Visų plokščių statistika" msgid "Display" -msgstr "Display" +msgstr "Rodyti" msgid "Flushed" -msgstr "Spurgo" +msgstr "Pašalinta" msgid "Tower" -msgstr "Torre" +msgstr "Bokštas" msgid "Total" -msgstr "Totale" +msgstr "Iš viso" msgid "Total Estimation" -msgstr "Stima totale" +msgstr "Bendra sąmata" msgid "Total time" -msgstr "Tempo totale" +msgstr "Bendras laikas" msgid "Total cost" -msgstr "Costo totale" +msgstr "Bendra kaina" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Patarimai:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Patarimai" msgid "up to" -msgstr "fino a" +msgstr "iki" msgid "above" -msgstr "sopra" +msgstr "aukščiau" msgid "from" -msgstr "da" - -msgid "Color Scheme" -msgstr "Schema Colore" +msgstr "nuo" msgid "Time" -msgstr "Tempo" +msgstr "Laikas" -msgid "Percent" -msgstr "Percentuale" - -msgid "Used filament" -msgstr "Filamento usato" +msgid "Usage" +msgstr "Naudojimas" msgid "Layer Height (mm)" -msgstr "Altezza layer (mm)" +msgstr "Sluoksnio aukštis (mm)" msgid "Line Width (mm)" -msgstr "Larghezza linea (mm)" +msgstr "Linijos plotis (mm)" msgid "Speed (mm/s)" -msgstr "Velocità (mm/s)" +msgstr "Greitis (mm/s)" msgid "Fan Speed (%)" -msgstr "Velocità ventola (%)" +msgstr "Ventiliatoriaus greitis (%)" msgid "Temperature (°C)" -msgstr "Temperatura (°C)" +msgstr "Temperatūra (°C)" msgid "Volumetric flow rate (mm³/s)" -msgstr "Flusso volumetrico (mm³/s)" +msgstr "Tūrinis srautas (mm³/s)" msgid "Travel" -msgstr "Spostamento" +msgstr "Judėjimas" msgid "Seams" -msgstr "Cuciture" +msgstr "Siūlės" msgid "Retract" -msgstr "Retrazione" +msgstr "Įtraukti" msgid "Unretract" -msgstr "De-retrazione" +msgstr "Išleisti" msgid "Filament Changes" -msgstr "Cambi filamento" +msgstr "Gijų keitimai" msgid "Wipe" -msgstr "Pulitura" +msgstr "Valymas" msgid "Options" -msgstr "Opzioni" +msgstr "Parinktys" msgid "travel" -msgstr "Spostamento" +msgstr "judėjimas" msgid "Extruder" -msgstr "Estrusore" - -msgid "Filament change times" -msgstr "Tempi cambio filamento" +msgstr "Ekstruderis" msgid "Cost" -msgstr "Costo" +msgstr "Kaina" + +msgid "Filament change times" +msgstr "Gijų keitimo laikai" msgid "Color change" -msgstr "Cambio colore" +msgstr "Spalvos pakeitimas" msgid "Print" -msgstr "Stampa" +msgstr "Spausdinti" msgid "Printer" -msgstr "Stampante" +msgstr "Spausdintuvas" -msgid "Custom g-code" -msgstr "G-code personalizzato" - -msgid "ToolChange" -msgstr "Cambio utensile" +msgid "Tool Change" +msgstr "Įrankių keitimas" msgid "Time Estimation" -msgstr "Tempo stimato" +msgstr "Lako sąnaudos" msgid "Normal mode" -msgstr "Modalità normale" +msgstr "Normalus režimas" msgid "Total Filament" -msgstr "Total Filament" +msgstr "Iš viso gijos" msgid "Model Filament" -msgstr "Model Filament" +msgstr "Gijos modeliams" msgid "Prepare time" -msgstr "Tempo preparazione" +msgstr "Paruošimo laikas" msgid "Model printing time" -msgstr "Tempo stampa del modello" +msgstr "Modelio spausdinimo laikas" msgid "Switch to silent mode" -msgstr "Passa a modalità silenziosa" +msgstr "Persijungti į tylųjį režimą" msgid "Switch to normal mode" -msgstr "Passa a modalità normale" +msgstr "Persijungti į normalų režimą" -msgid "Variable layer height" -msgstr "Altezza layer adattativo" - -msgid "Adaptive" -msgstr "Adattiva" - -msgid "Quality / Speed" -msgstr "Qualità / Velocità" - -msgid "Smooth" -msgstr "Leviga" - -msgid "Radius" -msgstr "Raggio" - -msgid "Keep min" -msgstr "Mantieni min" - -msgid "Left mouse button:" -msgstr "Tasto sinistro del mouse:" - -msgid "Add detail" -msgstr "Aggiungi dettaglio" - -msgid "Right mouse button:" -msgstr "Tasto destro mouse:" - -msgid "Remove detail" -msgstr "Rimuovi dettagli" - -msgid "Shift + Left mouse button:" -msgstr "Shift + Tasto sinistro mouse:" - -msgid "Reset to base" -msgstr "Ripristina alla base" - -msgid "Shift + Right mouse button:" -msgstr "Shift + Tasto destro mouse:" - -msgid "Smoothing" -msgstr "Lisciatura" - -msgid "Mouse wheel:" -msgstr "Rotella del mouse:" - -msgid "Increase/decrease edit area" -msgstr "Aumenta/diminuisci l'area di modifica" - -msgid "Sequence" -msgstr "Sequenza" - -msgid "Mirror Object" -msgstr "Specchia Oggetto" - -msgid "Tool Move" -msgstr "Sposta strumento" - -msgid "Tool Rotate" -msgstr "Strumento Ruota" - -msgid "Move Object" -msgstr "Sposta oggetto" - -msgid "Auto Orientation options" -msgstr "Opzioni orientamento automatico" - -msgid "Enable rotation" -msgstr "Abilita rotazione" - -msgid "Optimize support interface area" -msgstr "Ottimizza l'area dell'interfaccia di supporto" - -msgid "Orient" -msgstr "Orienta" - -msgid "Arrange options" -msgstr "Opzioni di disposizione" - -msgid "Spacing" -msgstr "Spaziatura" - -msgid "0 means auto spacing." -msgstr "0 means auto spacing." - -msgid "Auto rotate for arrangement" -msgstr "Ruota automaticamente per disporre" - -msgid "Allow multiple materials on same plate" -msgstr "Consenti più materiali sullo stesso piatto" - -msgid "Avoid extrusion calibration region" -msgstr "Evitare la regione di calibrazione dell'estrusione" - -msgid "Align to Y axis" -msgstr "Allinea all'asse Y" - -msgid "Add plate" -msgstr "Aggiungi piatto" - -msgid "Auto orient" -msgstr "Orientamento automatico" - -msgid "Arrange all objects" -msgstr "Disponi tutti gli oggetti" - -msgid "Arrange objects on selected plates" -msgstr "Disponi gli oggetti sui piatti selezionati" - -msgid "Split to objects" -msgstr "Dividi in oggetti" - -msgid "Split to parts" -msgstr "Dividi in parti" - -msgid "Assembly View" -msgstr "Vista montaggio" - -msgid "Select Plate" -msgstr "Seleziona piatto" - -msgid "Assembly Return" -msgstr "Ritorna al montaggio" - -msgid "return" -msgstr "Indietro" - -msgid "Paint Toolbar" -msgstr "Barra strumenti di pittura" - -msgid "Explosion Ratio" -msgstr "Rapporto di esplosione" - -msgid "Section View" -msgstr "Vista in sezione" - -msgid "Assemble Control" -msgstr "Controllo assemblaggio" - -msgid "Total Volume:" -msgstr "Total Volume:" - -msgid "Assembly Info" -msgstr "Informazioni sul montaggio" - -msgid "Volume:" -msgstr "Volume:" - -msgid "Size:" -msgstr "Dimensione:" - -#, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " -"separate the conflicted objects farther (%s <-> %s)." +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." msgstr "" -"Sono stati trovati conflitti di percorsi nel gcode sul layer %d, z = %.2lf " -"mm. Si prega di separare gli oggetti in conflitto (%s <-> %s)." - -msgid "An object is layed over the boundary of plate." -msgstr "Un oggetto è posizionato oltre il bordo del piatto." - -msgid "A G-code path goes beyond the max print height." -msgstr "Un percorso del G-code va oltre l'altezza di stampa massima." - -msgid "A G-code path goes beyond the boundary of plate." -msgstr "A G-code path goes beyond plate boundaries." - -msgid "Only the object being edit is visible." -msgstr "È visibile solo l'oggetto da modificare." msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and " "confirming that the height is within the build volume." msgstr "" -"Un oggetto è posizionato oltre il limite del piatto o supera il limite di " -"altezza.\n" -"Risolvi il problema spostando l'oggetto completamente dentro o fuori il " -"piatto verificando che l'altezza rientri nel volume di costruzione." +"Objektas yra padėtas ant plokštės ribos arba viršija aukščio ribą.\n" +"Išspręskite problemą, visiškai perkeldami jį ant plokštės arba nuimdami nuo " +"jos ir patikrinkite, ar aukštis neviršija spausdintuvo tūrio." + +msgid "Variable layer height" +msgstr "Kintamas sluoksnio aukštis" + +msgid "Adaptive" +msgstr "Prisitaikantis" + +msgid "Quality / Speed" +msgstr "Kokybė / Greitis" + +msgid "Smooth" +msgstr "Glotniai" + +msgid "Radius" +msgstr "Spindulys" + +msgid "Keep min" +msgstr "Laikyti min" + +msgid "Add detail" +msgstr "Pridėti elementą" + +msgid "Remove detail" +msgstr "Pašalinti elementą" + +msgid "Reset to base" +msgstr "Iš naujo nustatyti į pagrindinį" + +msgid "Smoothing" +msgstr "Glotninimas" + +msgid "Mouse wheel:" +msgstr "Pelės ratukas:" + +msgid "Increase/decrease edit area" +msgstr "Padidinti / sumažinti redagavimo sritį" + +msgid "Sequence" +msgstr "Seka" + +msgid "object selection" +msgstr "objekto pasirinkimas" + +msgid "part selection" +msgstr "detalės pasirinkimas" + +msgid "number keys" +msgstr "skaičių klavišai" + +msgid "number keys can quickly change the color of objects" +msgstr "skaičių klavišais galima greitai pakeisti objektų spalvą" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + +msgid "Mirror Object" +msgstr "Atspindėti objektą" + +msgid "Tool Move" +msgstr "Įrankio judėjimas" + +msgid "Tool Rotate" +msgstr "Įrankio sukimas" + +msgid "Move Object" +msgstr "Perkelti objektą" + +msgid "Auto Orientation options" +msgstr "Automatinio orientavimo parametrai" + +msgid "Enable rotation" +msgstr "Leisti sukimąsi" + +msgid "Optimize support interface area" +msgstr "Optimizuoti atramų sąlyčio plotą" + +msgid "Orient" +msgstr "Orientuoti" + +msgid "Arrange options" +msgstr "Išdėstymo parinktys" + +msgid "Spacing" +msgstr "Tarpai" + +msgid "0 means auto spacing." +msgstr "0 reiškia automatinius tarpus." + +msgid "Auto rotate for arrangement" +msgstr "Automatiškai pasukti išdėstymui" + +msgid "Allow multiple materials on same plate" +msgstr "Leisti skirtingas medžiagas ant tos pačios plokštės" + +msgid "Avoid extrusion calibration region" +msgstr "Vengti išspaudimo kalibravimo ploto" + +msgid "Align to Y axis" +msgstr "Išlygiuoti pagal Y ašį" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Įtraukti" + +msgid "Add plate" +msgstr "Įtraukti plokštę" + +msgid "Auto orient all/selected objects" +msgstr "Automatiškai orientuoti visi/pasirinkti objektai" + +msgid "Auto orient all objects on current plate" +msgstr "Automatiškai orientuoti visus objektus pasirinktoje plokštėje" + +msgid "Arrange all objects" +msgstr "Išdėstyti visus objektus" + +msgid "Arrange objects on selected plates" +msgstr "Išdėstyti objektus pasirinktose plokštėse" + +msgid "Split to objects" +msgstr "Padalinti į objektus" + +msgid "Split to parts" +msgstr "Padalinti į dalis" + +msgid "Assembly View" +msgstr "Surinkimo vaizdas" + +msgid "Select Plate" +msgstr "Pasirinkti plokštę" + +msgid "Slicing" +msgstr "Sluoksniuojama" + +msgid "Slice all" +msgstr "Sluoksniuoti viską" + +msgid "Failed" +msgstr "Nepavyko" + +msgid "All Plates" +msgstr "Visos plokštės" + +msgid "Stats" +msgstr "Statistika" + +msgid "Assembly Return" +msgstr "Sugrąžinti surinkimą" + +msgid "Return" +msgstr "Grąžinti" + +msgid "Toggle Axis" +msgstr "" + +msgid "Paint Toolbar" +msgstr "Piešimo įrankių juosta" + +msgid "Explosion Ratio" +msgstr "Plėtimosi santykis" + +msgid "Section View" +msgstr "Sekcijos peržiūra" + +msgid "Assemble Control" +msgstr "Surinkimo valdymas" + +msgid "Selection Mode" +msgstr "Pasirinkimo režimas" + +msgid "Total Volume:" +msgstr "Visas tūris:" + +msgid "Assembly Info" +msgstr "Surinkimo informacija" + +msgid "Volume:" +msgstr "Tūris:" + +msgid "Size:" +msgstr "Dydis:" + +#, c-format, boost-format +msgid "" +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " +"separate the conflicted objects farther (%s <-> %s)." +msgstr "" +"Rasta G-kode judėjimo kelių konfliktų %d sluoksnyje, Z = %.2lfmm. Prašome " +"labiau atskirti konfliktinius objektus (%s <-> %s)." + +msgid "An object is laid over the plate boundaries." +msgstr "Objektas yra už spausdinimo pagrindo ribų." + +msgid "A G-code path goes beyond the max print height." +msgstr "G-kode judėjimo maršrutas viršija maksimalų spausdinimo aukštį." + +msgid "A G-code path goes beyond the plate boundaries." +msgstr "G-kode judėjimo maršrutas išeina už spausdinimo plokštės ribų." + +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "Matomas tik redaguojamas objektas." + +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" +msgstr "" msgid "Calibration step selection" -msgstr "Seleziona calibrazione" +msgstr "Kalibravimo žingsnio pasirinkimas" msgid "Micro lidar calibration" -msgstr "Calibrazione micro lidar" +msgstr "Mikro lidaro kalibravimas" msgid "Bed leveling" -msgstr "Livellamento del piano" +msgstr "Spausdinimo pagrindo išlyginimas" -msgid "Vibration compensation" -msgstr "Compensazione delle vibrazioni" - -msgid "Motor noise cancellation" -msgstr "Cancellazione del rumore del motore" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" -msgstr "Programma calibrazione" +msgstr "Kalibravimo programa" msgid "" "The calibration program detects the status of your device automatically to " "minimize deviation.\n" "It keeps the device performing optimally." msgstr "" -"Il programma di calibrazione rileva automaticamente lo stato del dispositivo " -"per ridurre al minimo le deviazioni.\n" -"Questa funzione aiuta il dispositivo a mantenere prestazioni ottimali." +"Kalibravimo programa automatiškai nustato jūsų įrenginio būseną, kad " +"minimaliai nukryptų nuo parametrų.\n" +"Taip ji užtikrina optimalų įrenginio veikimą." msgid "Calibration Flow" -msgstr "Calibrazione flusso" +msgstr "Kalibravimo eiga" msgid "Start Calibration" -msgstr "Start Calibration" +msgstr "Pradėti kalibravimą" msgid "Completed" -msgstr "Completato" +msgstr "Užbaigta" msgid "Calibrating" -msgstr "Calibrazione" +msgstr "Kalibruojama" msgid "No step selected" -msgstr "Nessun Step selezionato" +msgstr "Nepasirinktas žingsnis" msgid "Auto-record Monitoring" -msgstr "Monitora registrazione automatica" +msgstr "Automatinio įrašymo stebėjimas" msgid "Go Live" -msgstr "Vai in diretta" +msgstr "Įjungti spausdinimo stebėjimą" msgid "Liveview Retry" -msgstr "Riprova Liveview" +msgstr "Pakartoti stebėjimą realiu laiku" msgid "Resolution" -msgstr "Risoluzione" +msgstr "Skiriamoji geba" msgid "Enable" -msgstr "Abilita" +msgstr "Įgalinti" msgid "Hostname or IP" -msgstr "Nome Host o IP" +msgstr "Hosto vardas arba IP" msgid "Custom camera source" -msgstr "Sorgente fotocamera personalizzata" +msgstr "Pasirinktinės kameros šaltinis" msgid "Show \"Live Video\" guide page." -msgstr "Mostra pagina della guida \"Diretta Video\"." +msgstr "Rodyti tiesioginio vaizdo vadovo puslapį." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" -msgstr "Connetti la stampante (LAN)" +msgid "Connect Printer (LAN)" +msgstr "Prijungti spausdintuvą (LAN)" msgid "Please input the printer access code:" -msgstr "Inserisci il codice di accesso alla stampante:" +msgstr "Prašome įvesti spausdintuvo prieigos kodą:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Si trova in \"Impostazioni > Rete > Codice di accesso\".\n" -"sulla stampante, come mostrato nella figura:" msgid "Invalid input." -msgstr "Input non valido." +msgstr "Netinkama įvestis." msgid "New Window" -msgstr "Nuova finestra" +msgstr "Naujas langas" msgid "Open a new window" -msgstr "Apri una nuova finestra" +msgstr "Atidaryti naują langą" msgid "Application is closing" -msgstr "Closing application" +msgstr "Programa uždaroma" msgid "Closing Application while some presets are modified." -msgstr "Chiusura dell'applicazione durante la modifica di alcuni preset." +msgstr "Programa bus uždaryta, nors kai kurie nustatymai neįrašyti." msgid "Logging" -msgstr "Accesso" +msgstr "Registravimas" + +msgid "Prepare" +msgstr "Paruošimas" msgid "Preview" -msgstr "Anteprima" +msgstr "Peržiūra" + +msgid "Device" +msgstr "Įrenginys" msgid "Multi-device" -msgstr "Multi-device" +msgstr "Multiįrenginys" msgid "Project" -msgstr "Progetto" +msgstr "Projektas" msgid "Yes" -msgstr "Si" +msgstr "Taip" msgid "No" -msgstr "No" +msgstr "Ne" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "verrà chiuso prima di creare un nuovo modello. Vuoi continuare?" +msgstr "bus uždaryta prieš sukuriant modelį. Ar norite tęsti?" msgid "Slice plate" -msgstr "Slice piatto" +msgstr "Sluoksniuoti plokštę" msgid "Print plate" -msgstr "Stampa piatto" - -msgid "Slice all" -msgstr "Slice tutto" +msgstr "Spausdinti plokštę" msgid "Export G-code file" -msgstr "Esporta file G-code" +msgstr "Eksportuoti G-kodo failą" + +msgid "Send" +msgstr "Siųsti" msgid "Export plate sliced file" -msgstr "Esporta il file del piatto elaborato" +msgstr "Eksportuoti sluoksniuotos plokštės failą" msgid "Export all sliced file" -msgstr "Esporta tutti i file elaborati" +msgstr "Eksportuoti visko sluoksniuoto failą" msgid "Print all" -msgstr "Stampa tutto" +msgstr "Spausdinti viską" msgid "Send all" -msgstr "Invia tutto" +msgstr "Siųsti viską" + +msgid "Send to Multi-device" +msgstr "Siųsti į multiįrenginį" msgid "Keyboard Shortcuts" -msgstr "Scorciatoie Tastiera" +msgstr "Klaviatūros nuorodos" msgid "Show the list of the keyboard shortcuts" -msgstr "Mostra l'elenco delle scorciatoie di tastiera" +msgstr "Rodyti sparčiųjų klavišų sąrašą" msgid "Setup Wizard" -msgstr "Setup Wizard" +msgstr "Nustatymų vedlys" msgid "Show Configuration Folder" -msgstr "Mostra cartella di configurazione" +msgstr "Rodyti konfigūravimo katalogą" msgid "Show Tip of the Day" -msgstr "Suggerimento del giorno" +msgstr "Rodyti dienos patarimą" msgid "Check for Update" -msgstr "Verifica aggiornamenti" +msgstr "Patikrinti ar nėra atnaujinimų" msgid "Open Network Test" -msgstr "Apri test di rete" +msgstr "Atidaryti tinklo testą" #, c-format, boost-format msgid "&About %s" -msgstr "Inform&azioni su %s" +msgstr "&Apie %s" msgid "Upload Models" -msgstr "Carica modelli" +msgstr "Įkelti modelius" msgid "Download Models" -msgstr "Scarica Modelli" +msgstr "Parsisiųsti modelius" msgid "Default View" -msgstr "Vista predefinita" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Superiore" +msgstr "Numatytas vaizdas" msgid "Top View" -msgstr "Vista superiore" +msgstr "Vaizdas iš viršaus" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" -msgstr "Inferiore" +msgstr "Apatinis" msgid "Bottom View" -msgstr "Vista inferiore" +msgstr "Vaizdas iš apačios" msgid "Front" -msgstr "Frontale" +msgstr "Priekis" msgid "Front View" -msgstr "Vista anteriore" +msgstr "Vaizdas iš priekio" msgid "Rear" -msgstr "Posteriore" +msgstr "Galas" msgid "Rear View" -msgstr "Vista posteriore" - -msgid "Left" -msgstr "Sinistra" +msgstr "Vaizdas iš galo" msgid "Left View" -msgstr "Vista sinistra" - -msgid "Right" -msgstr "Destra" +msgstr "Vaizdas iš kairės" msgid "Right View" -msgstr "Vista destra" +msgstr "Vaizdas iš dešinės" msgid "Start a new window" -msgstr "Inizia in una nuova finestra" +msgstr "Pradėti naują langą" msgid "New Project" -msgstr "Nuovo progetto" +msgstr "Naujas projektas" msgid "Start a new project" -msgstr "Inizia un nuovo progetto" +msgstr "Pradėti naują projektą" msgid "Open a project file" -msgstr "Apri un file progetto" +msgstr "Atidaryti projekto failą" -msgid "Recent projects" -msgstr "Progetti recenti" +msgid "Recent files" +msgstr "Naujausi failai" msgid "Save Project" -msgstr "Salva Progetto" +msgstr "Išsaugoti projektą" msgid "Save current project to file" -msgstr "Salva progetto corrente su file" +msgstr "Išsaugoti dabartinį projektą į failą" msgid "Save Project as" -msgstr "Salva Progetto come" - -msgid "Shift+" -msgstr "Shift+" +msgstr "Išsaugoti projektą kaip" msgid "Save current project as" -msgstr "Salva Progetto corrente come" +msgstr "Išsaugoti dabartinį projektą kaip" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" -msgstr "Importa 3MF/STL/STEP/SVG/OBJ/AMF" +msgstr "Importuoti 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" -msgstr "Carica modello" +msgstr "Įkelti modelį" msgid "Import Zip Archive" -msgstr "" +msgstr "Importuoti Zip archyvą" msgid "Load models contained within a zip archive" -msgstr "" +msgstr "Įkelti modelius iš ZIP archyvo" msgid "Import Configs" -msgstr "Importa configurazioni" +msgstr "Importuoti konfigūracijas" msgid "Load configs" -msgstr "Carica configurazioni" +msgstr "Užkrauti konfigūracijas" msgid "Import" -msgstr "Importa" +msgstr "Importuoti" msgid "Export all objects as one STL" -msgstr "Esporta tutti gli oggetti come un unico STL" +msgstr "Eksportuoti visus objektus kaip vieną STL" msgid "Export all objects as STLs" -msgstr "Esporta tutti gli oggetti come AWL" +msgstr "Eksportuoti visus objektus kaip STL" msgid "Export Generic 3MF" -msgstr "Esporta 3mf generico" +msgstr "Eksportuoti pagrindinį 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Esporta file 3mf senza usare alcune estensioni 3mf" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Eksportuoti 3MF failą nenaudojant kai kurių 3MF plėtinių" msgid "Export current sliced file" -msgstr "Esporta il file elaborato corrente" +msgstr "Eksportuoti dabartinį sluoksniuotą failą" msgid "Export all plate sliced file" -msgstr "Esporta tutti i piatti elaborati" +msgstr "Eksportuoti visų sluoksniuotų plokščių failą" msgid "Export G-code" -msgstr "Esporta G-code" +msgstr "Eksportuoti G-kodą" msgid "Export current plate as G-code" -msgstr "Esporta piatto corrente come G-code" +msgstr "Eksportuoti dabartinę plokštę kaip G-kodą" + +msgid "Export toolpaths as OBJ" +msgstr "Eksportuoti įrankių trajektorijas OBJ formatu" msgid "Export Preset Bundle" -msgstr "" +msgstr "Eksportuoti parametrų rinkinį" msgid "Export current configuration to files" -msgstr "Esporta la configurazione corrente in file" +msgstr "Eksportuoti dabartinę konfigūraciją į failus" msgid "Export" -msgstr "Esporta" +msgstr "Eksportuoti" msgid "Quit" -msgstr "Esci" +msgstr "Išeiti" msgid "Undo" -msgstr "Annulla" +msgstr "Anuliuoti" msgid "Redo" -msgstr "Ripeti" +msgstr "Perdaryti" msgid "Cut selection to clipboard" -msgstr "Taglia la selezione negli appunti" +msgstr "Iškirpti pasirinktą į iškarpinę" msgid "Copy" -msgstr "Copia" +msgstr "Kopijuoti" msgid "Copy selection to clipboard" -msgstr "Copia selezione negli appunti" +msgstr "Nukopijuoti pasirinkimą į mainų sritį" msgid "Paste" -msgstr "Incolla" +msgstr "Įklijuoti" msgid "Paste clipboard" -msgstr "Incolla appunti" +msgstr "Įklijuoti iškarpinės turinį" msgid "Delete selected" -msgstr "Elimina selezionato" +msgstr "Ištrinti pasirinktus" msgid "Deletes the current selection" -msgstr "Elimina la selezione corrente" +msgstr "Ištrina pasirinktus" msgid "Delete all" -msgstr "Elimina tutto" +msgstr "Ištrinti viską" msgid "Deletes all objects" -msgstr "Elimina tutti gli oggetti" +msgstr "Ištrina visus objektus" msgid "Clone selected" -msgstr "Clone selezionato" +msgstr "Klonuoti pasirinktą" msgid "Clone copies of selections" -msgstr "Clonare copie delle selezioni" +msgstr "Klonuoti pasirinktų kopijas" + +msgid "Duplicate Current Plate" +msgstr "Dubliuoti dabartinę plokštę" + +msgid "Duplicate the current plate" +msgstr "Dubliuoti dabartinę plokštelę" msgid "Select all" -msgstr "Seleziona tutto" +msgstr "Pasirinkti viską" msgid "Selects all objects" -msgstr "Seleziona tutti gli oggetti" +msgstr "Parenka visus objektus" msgid "Deselect all" -msgstr "Deseleziona tutto" +msgstr "Atžymėti visus pasirinkimus" msgid "Deselects all objects" -msgstr "Deseleziona tutti gli oggetti" +msgstr "Panaikina visų objektų pasirinkimą" msgid "Use Perspective View" -msgstr "Usa vista prospettica" +msgstr "Naudoti perspektyvinį vaizdą" msgid "Use Orthogonal View" -msgstr "Usa vista ortogonale" +msgstr "Naudoti ortogonalų vaizdą" + +msgid "Auto Perspective" +msgstr "Automatinė perspektyva" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Automatiškai perjungti ortografinį ir perspektyvinį vaizdą, kai perjungiamas " +"vaizdas iš viršaus / apačios / šono." msgid "Show &G-code Window" -msgstr "Mostra la finestra del G-code" +msgstr "Rodyti &G-kodo langą" -msgid "Show g-code window in Previce scene" -msgstr "Mostra finestra G-code nella scena di anteprima" +msgid "Show G-code window in Preview scene." +msgstr "Rodyti g-kodo langą peržiūros vaizde." msgid "Show 3D Navigator" -msgstr "Mostra navigatore 3D" +msgstr "Rodyti 3D navigatorių" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Mostra navigatore 3D nella scena Prepara e visualizza anteprima" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Rodyti 3D navigatorių paruošimo ir peržiūros scenose." msgid "Reset Window Layout" -msgstr "Ripristina layout finestra" +msgstr "Atstatyti lango išdėstymą" msgid "Reset to default window layout" -msgstr "Ripristina il layout predefinito della finestra" +msgstr "Atstatyti į pradinį lango išdėstymą" msgid "Show &Labels" -msgstr "Mostra &Etichette" +msgstr "Rodyti etiketes" -msgid "Show object labels in 3D scene" -msgstr "Mostra etichette oggetti nella scena 3D" +msgid "Show object labels in 3D scene." +msgstr "3D scenoje rodyti objektų etiketes." msgid "Show &Overhang" -msgstr "Mostra sporgenze" +msgstr "Rodyti iškyšas" -msgid "Show object overhang highlight in 3D scene" -msgstr "Mostra la sporgenza dell'oggetto evidenziata nella scena 3D" +msgid "Show object overhang highlight in 3D scene." +msgstr "3D scenoje paryškinti iškyšas." + +msgid "Show Selected Outline (beta)" +msgstr "Rodyti pasirinktą kontūrą (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje." msgid "Preferences" -msgstr "Preferenze" +msgstr "Parinktys" + +msgid "View" +msgstr "Vaizdas" msgid "Help" -msgstr "Aiuto" +msgstr "Pagalba" msgid "Temperature Calibration" -msgstr "Calibrazione della temperatura" +msgstr "Temperatūros kalibravimas" msgid "Pass 1" -msgstr "Passaggio 1" +msgstr "1 fazė" msgid "Flow rate test - Pass 1" -msgstr "Test di portata - Pass 1" +msgstr "Srauto testas - 1 fazė" msgid "Pass 2" -msgstr "Passaggio 2" +msgstr "2 fazė" msgid "Flow rate test - Pass 2" -msgstr "Test di portata - Pass 2" +msgstr "Srauto testas - 2 fazė" + +msgid "YOLO (Recommended)" +msgstr "YOLO (rekomenduojama)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "„Orca YOLO“ srauto kalibravimas, 0,01 žingsnis" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (perfekcionistinė versija)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "„Orca YOLO“ srauto kalibravimas, 0,005 žingsnis" msgid "Flow rate" -msgstr "Flusso" +msgstr "Srauto greitis" msgid "Pressure advance" -msgstr "Anticipo di pressione" +msgstr "Filamento tiekimas posūkio metu" msgid "Retraction test" -msgstr "Prova di retrazione" - -msgid "Orca Tolerance Test" -msgstr "Test di tolleranza dell'orca" +msgstr "Įtraukimo testas" msgid "Max flowrate" -msgstr "Portata massima" +msgstr "Maks srautas" + +msgid "Cornering" +msgstr "Posūkiai" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "Įvesties formavimo dažnis" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Įvesties formavimo Slopinimas/zeta koeficientas" + +msgid "Input Shaping" +msgstr "Įvesties formavimas" msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Altro..." - msgid "Tutorial" -msgstr "Tutorial" +msgstr "Pamokos" msgid "Calibration help" -msgstr "Aiuto per la calibrazione" - -msgid "More calibrations" -msgstr "Più calibrazioni" +msgstr "Kalibravimo pagalba" msgid "&Open G-code" -msgstr "Apri G-code" +msgstr "Atidaryti G-kodą" msgid "Open a G-code file" -msgstr "Apri un file G-code" +msgstr "Atidaryti G-kodo failą" msgid "Re&load from Disk" -msgstr "Ricaricare da disco" +msgstr "Iš naujo įke<i iš disko" msgid "Reload the plater from disk" -msgstr "Ricarica piano da disco" +msgstr "Iš naujo įkelkite plokštę iš disko" msgid "Export &Toolpaths as OBJ" -msgstr "Esporta percorso strumen&to come OBJ" - -msgid "Export toolpaths as OBJ" -msgstr "Esporta percorso strumento come OBJ" +msgstr "Eksportas ir įrankių trajektorijos kaip OBJ" msgid "Open &Slicer" -msgstr "Aprire &Studio" +msgstr "Atidaryti &sluoksniuotoją" msgid "Open Slicer" -msgstr "Apri Studio" +msgstr "Atidaryti sluoksniuotoją" msgid "&Quit" -msgstr "&Esci" +msgstr "Išeiti" #, c-format, boost-format msgid "Quit %s" -msgstr "Chiudi %s" +msgstr "Išeiti iš %s" msgid "&File" -msgstr "&File" +msgstr "&Failas" msgid "&View" -msgstr "&Vista" +msgstr "&Vaizdas" msgid "&Help" -msgstr "&Aiuto" +msgstr "Pagalba" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Esiste un file con lo stesso nome: %s. Vuoi sovrascriverlo?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Failas tokiu pavadinimu jau egzistuoja: %s. Ar norite jį pakeisti?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Esiste una configurazione con lo stesso nome: %s. Vuoi sovrascriverla?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "" +"Konfigūracija tokiu pavadinimu jau egzistuoja: %s. Ar norite ją pakeisti?" msgid "Overwrite file" -msgstr "Sovrascrivi file" +msgstr "Perrašyti failą" + +msgid "Overwrite config" +msgstr "Perrašyti konfigūraciją" msgid "Yes to All" -msgstr "Sì a tutto" +msgstr "Taip viskam" msgid "No to All" -msgstr "No a tutto" +msgstr "Ne viskam" msgid "Choose a directory" -msgstr "Scegliere una directory" +msgstr "Pasirinkite katalogą" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" -msgstr[0] "" -"Viene esportata %d configurazione. (Solo configurazioni non di sistema)" -msgstr[1] "" -"Vengono esportate %d configurazioni. (Solo configurazioni non di sistema)" +msgstr[0] "Eksportuota %d konfigūracija. (tik nesisteminė konfigūracija)" +msgstr[1] "Eksportuotos %d konfigūracijos. (tik nesisteminės konfigūracijos)" +msgstr[2] "Eksportuota %d konfigūracijų. (tik nesisteminės konfigūracijos)" msgid "Export result" -msgstr "Risultato Esportazione" +msgstr "Eksportuoti rezultatą" msgid "Select profile to load:" -msgstr "Seleziona profilo da caricare:" +msgstr "Pasirinkite profilį įkėlimui:" #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "" "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "" -"È stata importata %d configurazione. (Solo configurazioni non di sistema e " -"compatibili)" +"Įkelta %d konfigūracija. (Tik nesisteminė ir suderinama konfigūracija)" msgstr[1] "" -"Sono state importate %d configurazioni. (Solo configurazioni non di sistema " -"e compatibili)" +"Įkeltos %d konfigūracijos. (Tik nesisteminės ir suderinamos konfigūracijos)" +msgstr[2] "" +"Įkelta %d konfigūracijų. (Tik nesisteminės ir suderinamos konfigūracijos)" msgid "" "\n" @@ -5005,536 +5615,654 @@ msgid "" "the configs." msgstr "" "\n" -"Suggerimento: assicurati di aver aggiunto la stampante corrispondente prima " -"di importare le configurazioni." +"Pastaba: Prieš įkeliant konfigūracijas įsitikinkite, kad pridėjote " +"atitinkamą spausdintuvą." msgid "Import result" -msgstr "Risultato dell'importazione" +msgstr "Importuoti rezultatą" msgid "File is missing" -msgstr "File mancante" +msgstr "Trūksta failo" msgid "The project is no longer available." -msgstr "Il progetto non è più disponibile." +msgstr "Projektas nebepasiekiamas." msgid "Filament Settings" -msgstr "Impostazioni Filamento" +msgstr "Gijos nustatymai" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Vuoi sincronizzare i tuoi dati personali da Bambu Cloud?\n" -"Contiene le seguenti informazioni:\n" -"1. I presets del processo\n" -"2. I presets del filamento\n" -"3. I presets della stampante" +"Ar norite sinchronizuoti asmeninius duomenis iš Bambu Cloud?\n" +"Juose yra ši informacija:\n" +"1. Procesų išankstiniai nustatymai\n" +"2. Filamento išankstiniai nustatymai\n" +"3. Spausdintuvo išankstiniai nustatymai" msgid "Synchronization" -msgstr "Sincronizzazione" +msgstr "Sinchronizacija" msgid "The device cannot handle more conversations. Please retry later." msgstr "" -"Il dispositivo non è in grado di gestire più conversazioni. Riprova più " -"tardi." +"Įrenginys, su kuriuo bandote bendrauti, šiuo metu yra perkrautas ir negali " +"palaikyti daugiau pokalbių. Pabandykite vėliau." msgid "Player is malfunctioning. Please reinstall the system player." -msgstr "" -"Lettore non funzionante correttamente. Reinstallare il lettore di sistema." +msgstr "Grotuvas neveikia tinkamai. Prašome iš naujo įdiegti sistemos grotuvą." msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "Player non caricato; fai clic sul pulsante «play» per riprovare." +msgstr "" +"Grotuvas neįkeltas. Spustelėkite \"paleisti\" mygtuką, kad bandytumėte iš " +"naujo." msgid "Please confirm if the printer is connected." -msgstr "Verifica che la stampante sia collegata." +msgstr "Prašome patvirtinti, kas spausdintuvas prijungtas." msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." -msgstr "La stampante è in fase di download. Attendi il completamento." +msgstr "" +"Spausdintuvas šiuo metu siunčiasi naujinį. Pabandykite dar kartą, kai " +"atsisiuntimas bus baigtas." msgid "Printer camera is malfunctioning." -msgstr "La fotocamera della stampante non funziona correttamente." +msgstr "Spausdintuvo kamera neveikia tinkamai." -msgid "Problem occured. Please update the printer firmware and try again." -msgstr "Si è verificato un problema. Aggiorna il firmware stampante e riprova." +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "" +"Iškilo problema. Atnaujinkite spausdintuvo programinę įrangą ir bandykite " +"dar kartą." msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." +"LAN tiesioginė peržiūra („Liveview“) išjungta. Įjunkite tiesioginę peržiūrą " +"spausdintuvo ekrane." msgid "Please enter the IP of printer to connect." -msgstr "Inserisci l'IP stampante da connettere." +msgstr "Prašome įvesti norimo prijungti spausdintuvo IP adresą." msgid "Initializing..." -msgstr "Inizializzazione ..." +msgstr "Inicializuojama..." msgid "Connection Failed. Please check the network and try again" -msgstr "Connessione fallita. Controlla la rete e riprova" +msgstr "Ryšio klaida. Patikrinkite tinklą ir bandykite dar kartą" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" -"Controlla la rete e riprova. Se il problema persiste prova ad aggiornare o " -"riavviare la stampante." +"Ryšio klaida. Patikrinkite tinklą ir bandykite dar kartą. Jei problema " +"neišnyksta, galite pabandyti iš naujo paleisti arba atnaujinti spausdintuvą." msgid "The printer has been logged out and cannot connect." -msgstr "La stampante è stata disconnessa e non può connettersi." +msgstr "Spausdintuvas atsijungė ir nebegali prisijungti." -msgid "Stopped." -msgstr "Interrotto." +msgid "Video Stopped." +msgstr "Vaizdo įrašas sustabdytas." msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "Connessione LAN non riuscita (impossibile avviare liveview)" +msgstr "LAN prisijungimo klaida (Nepavyko paleisti tiesioginės peržiūros)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" -"Per questa operazione è necessario Virtual Camera Tools!\n" -"Vuoi installarli?" +"Šiai užduočiai reikia Virtualios kameros įrankių!\n" +"Ar norite juos instaliuoti?" msgid "Downloading Virtual Camera Tools" -msgstr "Scaricare strumenti telecamera virtuale" +msgstr "Atsisiunčiami virtualios kameros įrankiai" msgid "" "Another virtual camera is running.\n" "Snapmaker Orca supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" -"È in funzione un'altra telecamera virtuale.\n" -"Snapmaker Orca supporta solo una singola telecamera virtuale.\n" -"Si desidera interrompere questa telecamera virtuale?" +"Veikia kita virtuali kamera.\n" +"Snapmaker Orca palaiko tik vieną virtualią kamerą.\n" +"Ar norite sustabdyti šią virtualią kamerą?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" -msgstr "Inizializzazione Virtual Camera fallita (%s)!" +msgstr "Nepavyko inicijuoti virtualios kameros (%s)!" msgid "Network unreachable" -msgstr "Rete non raggiungibile" +msgstr "Tinklas nepasiekiamas" msgid "Information" -msgstr "Informazione" +msgstr "Informacija" msgid "Playing..." -msgstr "Riproduzione..." +msgstr "Leidžiama..." + +msgid "Loading..." +msgstr "Įkeliama..." msgid "Year" -msgstr "Anno" +msgstr "Metai" msgid "Month" -msgstr "Mese" +msgstr "Mėnuo" msgid "All Files" -msgstr "Tutti i file" +msgstr "Visi failai" msgid "Group files by year, recent first." -msgstr "Raggruppa i file per anno, prima i recenti." +msgstr "Grupuoti failus pagal metus, naujausi pirmiausia." msgid "Group files by month, recent first." -msgstr "Raggruppa i file per mese, prima i recenti." +msgstr "Grupuoti failus pagal mėnesį, naujausi pirmiausia." msgid "Show all files, recent first." -msgstr "Mostra tutti i file, prima i recenti." +msgstr "Rodyti visus failus, naujausi pradžioje." + +msgid "Timelapse" +msgstr "Greitintas vaizdo įrašas" msgid "Switch to timelapse files." -msgstr "Passa ai file timelapse." +msgstr "Perjungti į pakadrinio video failus." msgid "Video" msgstr "Video" msgid "Switch to video files." -msgstr "Passare ai file video." +msgstr "Perjungti į video failus." -msgid "Switch to 3mf model files." -msgstr "Passa ai file modello 3mf." +msgid "Switch to 3MF model files." +msgstr "Perjungti į 3MF modelių failus." msgid "Delete selected files from printer." -msgstr "Elimina i file selezionati dalla stampante." +msgstr "Ištrinti pasirinktus failus iš spausdintuvo." msgid "Download" -msgstr "Download" +msgstr "Parsisiųsti" msgid "Download selected files from printer." -msgstr "Scarica i file selezionati dalla stampante." +msgstr "Atsisiųsti pasirinktus failus iš spausdintuvo." msgid "Select" -msgstr "Seleziona" +msgstr "Pasirinkti" msgid "Batch manage files." -msgstr "Gestione batch dei file." +msgstr "Valdyti fails rinkinyje." msgid "Refresh" -msgstr "Aggiorna" +msgstr "Atnaujinti" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "Iš naujo iš spausdintuvo įkelti failų sąrašą." msgid "No printers." -msgstr "Nessuna stampante." - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Connessione non riuscita [%d]!" +msgstr "Bėra spausdintuvų." msgid "Loading file list..." -msgstr "Caricamento elenco file..." +msgstr "Įkeliamas failų sąrašas..." msgid "No files" -msgstr "Nessun file" +msgstr "Nėra failų" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "" -"Inizializzazione fallita (la connessione del dispositivo non è pronta)!" +msgstr "Įkėlimas nepavyko" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "LAN ryšio klaida (Nepavyko pasiekti SD kortelės)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inizializzazione fallita (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" "You are going to delete %u files from printer. Are you sure to continue?" -msgstr[0] "" -"Stai per eliminare %u file dalla stampante. Sei sicuro di continuare?" -msgstr[1] "" -"Stai per eliminare %u i file dalla stampante. Sei sicuro di continuare?" +msgstr[0] "Ketinate ištrinti %u failą iš spausdintuvo. Ar norite tęsti?" +msgstr[1] "Ketinate ištrinti %u failus iš spausdintuvo. Ar norite tęsti?" +msgstr[2] "Ketinate ištrinti %u failų iš spausdintuvo. Ar norite tęsti?" msgid "Delete files" -msgstr "Elimina i file" +msgstr "Ištrinti failus" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Vuoi eliminare il file '%s' dalla stampante?" +msgstr "Ar norite ištrinti failą \"%s\" iš spausdintuvo?" msgid "Delete file" -msgstr "Elimina file" +msgstr "Ištrinti failą" -msgid "Fetching model infomations ..." -msgstr "Recupero informazioni del modello..." +msgid "Fetching model information..." +msgstr "Modelio informacijos rinkimas..." msgid "Failed to fetch model information from printer." -msgstr "Impossibile recuperare le informazioni del modello dalla stampante." +msgstr "Nepavyko iš spausdintuvo gauti modelio informacijos." msgid "Failed to parse model information." -msgstr "Impossibile analizzare le informazioni del modello" +msgstr "Nepavyko apdoroti modelio informacijos." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -"Il file .gcode.3mf non contiene dati G-code. Taglialo con Snapmaker Orca ed " -"esporta un nuovo file .gcode.3mf." +".gcode.3mf faile nėra G-kodo duomenų. Susluoksniuokite failą su Snapmaker Orca " +"ir eksportuokite naują .gcode.3mf failą." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." -msgstr "Il file \"%s\" è stato perso! Si prega di scaricarlo di nuovo." +msgstr "Failas '%s' prarastas! Prašome parsisiųsti jį dar kartą." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" +"Failas: %s\n" +"Pavadinimas: %s\n" msgid "Download waiting..." -msgstr "Download in attesa..." +msgstr "Laikia atsisiuntimas..." msgid "Play" -msgstr "Play" +msgstr "Leisti" msgid "Open Folder" -msgstr "Apri cartella" +msgstr "Atverti katalogą" msgid "Download finished" -msgstr "Download completato" +msgstr "Atsisiuntimas baigtas" #, c-format, boost-format msgid "Downloading %d%%..." -msgstr "Scaricamento %d%%..." +msgstr "Atsisiunčiama %d%%..." + +msgid "Air Condition" +msgstr "" msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." +"Bandant prisijungti prie spausdintuvo, operacija negali būti atlikta iš " +"karto. Pabandykite dar kartą vėliau." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." -msgstr "Il file non esiste" +msgstr "Failas neegzistuoja." msgid "File checksum error. Please retry." -msgstr "Errore di checksum del file. Si prega di riprovare." +msgstr "Failo kontrolinės sumos klaida. Prašome pakartoti." msgid "Not supported on the current printer version." -msgstr "Non supportato nella versione corrente della stampante." +msgstr "Nepalaikoma dabartinio spausdintuvo versijos." -msgid "Storage unavailable, insert SD card." -msgstr "Memoria non disponibile, inserire la scheda SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" -msgstr "Codice errore: %d" +msgstr "Klaidos kodas: %d" + +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" msgid "Speed:" -msgstr "Velocità:" +msgstr "Greitis:" msgid "Deadzone:" -msgstr "Zona morta:" +msgstr "Akla zona:" msgid "Options:" -msgstr "Opzioni:" +msgstr "Pasirinkimai:" msgid "Zoom" -msgstr "Zoom" +msgstr "Padidinti" msgid "Translation/Zoom" -msgstr "Traslazione/Zoom" +msgstr "Konvertavimas/Mastelio keitimas" msgid "3Dconnexion settings" -msgstr "Impostazioni 3Dconnexion" +msgstr "3Dconnexion nustatymai" msgid "Swap Y/Z axes" -msgstr "Inverti assi Y/Z" +msgstr "Sukeisti Y/Z ašis" msgid "Invert X axis" -msgstr "Inverti asse X" +msgstr "Apsukti X ašį" msgid "Invert Y axis" -msgstr "Inverti asse Y" +msgstr "Apsukti Y ašį" msgid "Invert Z axis" -msgstr "Inverti asse Z" +msgstr "Apsukti Z ašį" msgid "Invert Yaw axis" -msgstr "Inverti asse di imbardata" +msgstr "Apsukti posūkio aplink ašį" msgid "Invert Pitch axis" -msgstr "Inverti asse passo" +msgstr "Apsukti polinkio ašį" msgid "Invert Roll axis" -msgstr "Inverti asse di rollio" +msgstr "Apsukti ritinio ašį" + +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Paieška" + +msgid "My Device" +msgstr "Mano įrenginys" + +msgid "Other Device" +msgstr "Kitas įrenginys" + +msgid "Online" +msgstr "Pasiekiamas" + +msgid "Input access code" +msgstr "Įvesti prieigos kodą" + +msgid "Can't find my devices?" +msgstr "Negalite rasti jūsų įrenginių?" + +msgid "Log out successful." +msgstr "Atsijungimas sėkmingas." + +msgid "Offline" +msgstr "Neprisijungus" + +msgid "Busy" +msgstr "Užimtas" + +msgid "Modifying the device name" +msgstr "Modifikuojamas įrenginio pavadinimas" + +msgid "Name is invalid;" +msgstr "Pavadinimas netinkamas;" + +msgid "illegal characters:" +msgstr "neleidžiami simboliai:" + +msgid "illegal suffix:" +msgstr "neleidžiamas plėtinys:" + +msgid "The name is not allowed to be empty." +msgstr "Neleidžiama, kad pavadinimas būtų tuščias." + +msgid "The name is not allowed to start with space character." +msgstr "Neleidžiama, kad pavadinimas prasidėtų tarpo simboliu." + +msgid "The name is not allowed to end with space character." +msgstr "Neleidžiama, kad pavadinimas baigtųsi tarpo simboliu." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Susieti su PIN kodu" + +msgid "Bind with Access Code" +msgstr "Susieti su prieigos kodu" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" msgid "Printing Progress" -msgstr "Avanzamento della stampa" +msgstr "Spausdinimo eiga" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Sustabdyti" msgid "Layer: N/A" -msgstr "Layer: N/D" +msgstr "Sluoksnis: N/A" msgid "Clear" -msgstr "Cancella" +msgstr "Išvalyti" msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"La stampa del modello è stata completata, \n" -"tuttavia la sincronizzazione delle informazioni di valutazione non è " -"riuscita." +"Sėkmingai išspausdinote mažą modelį, tačiau \n" +"įvertinimo informacijos sinchronizavimas nepavyko." msgid "How do you like this printing file?" -msgstr "Che cosa ne pensi di questo file di stampa?" +msgstr "Kaip jums patiko šis spausdinimo failas?" msgid "" "(The model has already been rated. Your rating will overwrite the previous " "rating.)" msgstr "" -"(Il modello è già stato valutato. La tua valutazione sovrascriverà la " -"valutazione precedente.)" +"(Modelis jau buvo įvertintas. Jūsų įvertinimas perrašys ankstesnį " +"įvertinimą.)" msgid "Rate" -msgstr "Vota" +msgstr "Įvertinti" msgid "Camera" -msgstr "Camera" +msgstr "Kamera" -msgid "SD Card" -msgstr "MicroSD" +msgid "Storage" +msgstr "Saugykla" msgid "Camera Setting" -msgstr "Impostazioni camera" +msgstr "Kameros nustatymai" msgid "Switch Camera View" -msgstr "Cambia inquadratura" +msgstr "Perjungti kameros vaizdą" msgid "Control" -msgstr "Controllo" +msgstr "Valdyti" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "Spasdintuvo dalys" msgid "Print Options" -msgstr "Opzioni stampa" - -msgid "100%" -msgstr "100%" +msgstr "Spausdinimo parametrai" msgid "Lamp" -msgstr "Lamp" - -msgid "Aux" -msgstr "Ausiliario" - -msgid "Cham" -msgstr "Camera" +msgstr "Apšvietimas" msgid "Bed" -msgstr "Piano" +msgstr "Pagrindas" msgid "Debug Info" -msgstr "Informazioni di debug" +msgstr "Derinimo informacija" -msgid "No SD Card" -msgstr "Nessuna scheda microSD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "microSD anomala" +msgid "No Storage" +msgstr "Nėra saugyklos" + +msgid "Storage Abnormal" +msgstr "Netinkama saugykla" msgid "Cancel print" -msgstr "Annulla la stampa" +msgstr "Atšaukti spausdinimą" -msgid "Are you sure you want to cancel this print?" -msgstr "Sei sicuro di voler annullare la stampa?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Spausdintuvas užimtas kitu spausdinimo darbu." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." -msgstr "Downloading..." +msgstr "Atsisunčiama..." msgid "Cloud Slicing..." -msgstr "Slicing in cloud..." +msgstr "Sluoksniavimas debesyje..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "Ci sono %s attività davanti nella coda di slicing del cloud." +msgstr "Debesies sluoksniavimo eilėje yra dar %s užduotys priekyje." #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "Sluoksnis: %s" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "Sluoksnis: %d/%d" + +#, fuzzy +msgid "" +"Please heat the nozzle to above 170°C before loading or unloading filament." +msgstr "" +"Prašome prieš įtraukiant ar išstumiant giją įkaitinti purkštuką virš 170 " +"laipsnių." msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." msgstr "" -"Si prega di riscaldare l'ugello a oltre 170 gradi prima di caricare o " -"scaricare il filamento." - -msgid "Still unload" -msgstr "Scarica ancora" - -msgid "Still load" -msgstr "Carica ancora" msgid "Please select an AMS slot before calibration" -msgstr "Seleziona uno slot AMS prima di calibrare." +msgstr "Prieš kalibruodami pasirinkite AMS lizdą" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " "unload the filament and try again." msgstr "" -"Impossibile leggere le informazioni sul filamento: il filamento è caricato " -"nella testa di stampa. Scaricare il filamento e riprovare." +"Negaliu nuskaityti gijos informacijos: gija įdėta į įrankio galvutę, " +"išimkite giją ir bandykite dar kartą." msgid "This only takes effect during printing" -msgstr "Questo ha effetto solo in fase di stampa" +msgstr "Tai turi įtakos tik spausdinimo metu" msgid "Silent" -msgstr "Silent" +msgstr "Tyliai" msgid "Standard" -msgstr "Standard" +msgstr "Standartinis" msgid "Sport" -msgstr "Sport" +msgstr "Sportiškai" msgid "Ludicrous" -msgstr "Ludicrous" +msgstr "Žaibiškai" -msgid "Can't start this without SD card." -msgstr "Impossibile iniziare senza scheda MicroSD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" -msgstr "Valutare il profilo di stampa" +msgstr "Įvertinkite spausdinimo profilį" msgid "Comment" -msgstr "Commento" +msgstr "Kometarai" msgid "Rate this print" -msgstr "Vota questa stampa" +msgstr "Įvertinkite šį spausdinį" msgid "Add Photo" -msgstr "Aggiungi foto" +msgstr "Įtraukti nuotrauką" msgid "Delete Photo" -msgstr "Elimina foto" +msgstr "Ištrinti nuotrauką" msgid "Submit" -msgstr "Invia" +msgstr "Viskas tinka" msgid "Please click on the star first." -msgstr "Fare clic prima sulla stella." - -msgid "InFo" -msgstr "Info" +msgstr "Pirmiausia paspauskite žvaigždutę." msgid "Get oss config failed." -msgstr "Ottenere la configurazione di oss non riuscita." +msgstr "Nepavyko gauti OSS konfigūracijos." -msgid "Upload Pictrues" -msgstr "Carica foto" +msgid "Upload Pictures" +msgstr "Įkelti paveikslėlius" msgid "Number of images successfully uploaded" -msgstr "Numero di immagini caricate con successo" +msgstr "Paveiksliukų skaičius sėkmingai įkeltas" msgid " upload failed" -msgstr " Caricamento non riuscito" +msgstr " įkėlimas nepavyko" msgid " upload config prase failed\n" -msgstr " Caricamento della configurazione prase non riuscita\n" +msgstr " nepavyko apdoroti konfigūracijos įkėlimo\n" msgid " No corresponding storage bucket\n" -msgstr " Nessun secchio di stoccaggio corrispondente\n" +msgstr " Nėra atitinkamo saugojimo talpyklos\n" -msgid " can not be opened\n" -msgstr " non può essere aperto\n" +msgid " cannot be opened\n" +msgstr " negalima atverti\n" msgid "" "The following issues occurred during the process of uploading images. Do you " "want to ignore them?\n" "\n" msgstr "" -"Durante il processo di caricamento delle immagini si sono verificati i " -"seguenti problemi. Vuoi ignorarli?\n" +"Įkeliant vaizdus kilo šios problemos. Ar norite jas ignoruoti?\n" "\n" msgid "info" @@ -5542,1970 +6270,2530 @@ msgstr "info" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "" -"Sincronizzazione dei risultati di stampa. Riprova qualche secondo dopo." +"Sinchronizuojami spausdinimo rezultatai. Pabandykite dar kartą po kelių " +"akimirkų." msgid "Upload failed\n" -msgstr "Caricamento non riuscito\n" +msgstr "Įkėlimas nepavyko\n" msgid "obtaining instance_id failed\n" -msgstr "ottenere instance_id non è riuscito\n" +msgstr "nepavyko gauti instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" -"Il risultato del tuo commento non può essere caricato per alcuni motivi. " -"Come segue:\n" +"Jūsų komentaro rezultato nepavyko įkelti dėl kelių priežasčių. Apie jas " +"pranešama toliau:\n" "\n" -"Codice di errore: " +" klaidos kodas: " msgid "error message: " -msgstr "messaggio d'errore: " +msgstr "klaidos pranešimas: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" -"Vuoi reindirizzare alla pagina web per la valutazione?" +"\n" +"Norite būti nukreipti į puslapį, kuriame galima įvertinti?" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" -"Alcune delle tue immagini non sono state caricate. Vuoi reindirizzare alla " -"pagina web per la valutazione?" +"Nepavyko įkelti kai kurių jūsų vaizdų. Norite būti nukreipti į puslapį, " +"kuriame galite įvertinti?" msgid "You can select up to 16 images." -msgstr "È possibile selezionare fino a 16 immagini." +msgstr "Jūs galite pasirinkti iki 16 paveikslėlių." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" -"È necessario almeno un record di stampa riuscito di questo profilo di " -"stampa \n" -"per dare una valutazione positiva (4 o 5 stelle)." +"Norint palikti teigiamą įvertinimą (4 arba 5 žvaigždutės), būtinas \n" +"bent vienas sėkmingas spausdinimo rezultatas su šiuo spausdinimo profiliu." msgid "Status" -msgstr "Stato" +msgstr "Būsena" +msgctxt "Firmware" msgid "Update" -msgstr "Aggiorna" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" -msgstr "Non mostrare più" +msgstr "Daugiau nerodyti" + +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" #, c-format, boost-format msgid "%s error" -msgstr "errore %s" +msgstr "%s klaida" #, c-format, boost-format msgid "%s has encountered an error" -msgstr "%s ha riscontrato un errore" +msgstr "%s įvyko klaida" #, c-format, boost-format msgid "%s warning" -msgstr "Avviso %s" +msgstr "%s įspėjimas" #, c-format, boost-format msgid "%s has a warning" -msgstr "%s ha un avviso" +msgstr "%s turi įspėjimą" #, c-format, boost-format msgid "%s info" -msgstr "Informazioni %s " +msgstr "%s info" #, c-format, boost-format msgid "%s information" -msgstr "%s informazioni" +msgstr "%s informacija" msgid "Skip" -msgstr "Salta" +msgstr "Praleisti" -msgid "Newer 3mf version" -msgstr "Versione 3mf più recente" +#, fuzzy +msgid "Newer 3MF version" +msgstr "Naujesnė 3MF versija" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" +"3MF failo versija yra Beta versijos, t.y. naujesnė, negu dabartinė Orca " +"Slicer versija." msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "" +msgstr "Jei norite pabandyti Snapmaker Orca Beta, turėtumėte spustelėti" msgid "Download Beta Version" -msgstr "Scarica la versione beta" +msgstr "Atsisiųsti Beta versiją" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." -msgstr "" +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "3MF versija yra naujesnė, negu dabar naudojama Snapmaker Orca versija." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" +"Atnaujinus Snapmaker Orca programinę įrangą galėsite naudoti visas 3MF failo " +"funkcijas." msgid "Current Version: " -msgstr "Versione corrente:" +msgstr "Dabartinė versija: " msgid "Latest Version: " -msgstr "Ultima versione: " +msgstr "Paskutinė versija: " + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" -msgstr "Not for now" +msgstr "Dabar ne" + +msgid "Server Exception" +msgstr "Serverio išimtis" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Serveris negali atsakyti. Norėdami patikrinti serverio būseną, spustelėkite " +"toliau pateiktą nuorodą." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Jei serveris yra sugedęs, galite laikinai naudoti spausdinimą neprisijungus " +"arba spausdinimą vietiniame tinkle." + +msgid "How to use LAN only mode" +msgstr "Kaip naudoti tik LAN režimą" + +msgid "Don't show this dialog again" +msgstr "Daugiau nerodyti šio dialogo lango" msgid "3D Mouse disconnected." -msgstr "Mouse 3D disconnesso." +msgstr "3D pelė atjungta." msgid "Configuration can update now." -msgstr "La configurazione può ora essere aggiornata." +msgstr "Yra nauja konfigūracija. Atnaujinti dabar?" msgid "Detail." -msgstr "Dettagli." +msgstr "Daugiau." msgid "Integration was successful." -msgstr "L'integrazione è avvenuta con successo." +msgstr "Integracija sėkminga." msgid "Integration failed." -msgstr "Integrazione fallita." +msgstr "Integracija nepavyko." msgid "Undo integration was successful." -msgstr "Annullamento integrazione riuscita." +msgstr "Integracijos atšaukimas sėkmingas." msgid "New network plug-in available." -msgstr "Nuovo plug-in di network disponibile." +msgstr "Galimas naujas tinklo papildinys." msgid "Details" -msgstr "Dettagli" +msgstr "Smulkiau" msgid "New printer config available." -msgstr "È disponibile una nuova configurazione della stampante." +msgstr "Pasiekiama nauja spausdintuvo konfigūracija." msgid "Wiki" msgstr "Wiki" msgid "Undo integration failed." -msgstr "Annullamento integrazione non riuscito." +msgstr "Integracijos atšaukimas nepavyko." msgid "Exporting." -msgstr "Esportazione." +msgstr "Eksportuojama." msgid "Software has New version." -msgstr "Il software ha una nuova versione." +msgstr "Yra atnaujinimas!" msgid "Goto download page." -msgstr "Vai alla pagina di download." +msgstr "Eikite į atsisiuntimo puslapį." msgid "Open Folder." -msgstr "Apri Cartella." +msgstr "Atverti katalogą." msgid "Safely remove hardware." -msgstr "Rimuovi l'hardware in modo sicuro." +msgstr "Saugiai atjunkite įrangą." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." -msgstr[0] "%1$d L'oggetto ha supporti personalizzati." -msgstr[1] "%1$d Objects have custom supports." +msgstr[0] "%1$d objektas turi pasirinktines atramas." +msgstr[1] "%1$d objektai turi pasirinktines atramas." +msgstr[2] "%1$d objektų turi pasirinktines atramas." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d L'oggetto ha una pittura a colori." -msgstr[1] "%1$d Objects have color painting." +msgstr[0] "%1$d objektas yra spalvotas." +msgstr[1] "%1$d objektai yra spalvoti." +msgstr[2] "%1$d objektų yra spalvoti." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "%1$d oggetto è stato caricato come parte di un oggetto tagliato." -msgstr[1] "%1$d oggetti sono stati caricati come parti di un oggetto tagliato" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d objektas įkeltas kaip sluoksniuojamo objekto dalis." +msgstr[1] "%1$d objektai įkelti kaip sluoksniuojamo objekto dalys." +msgstr[2] "%1$d objektų įkelta kaip sluoksniuojamo objekto dalis." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d objektas buvo įkeltas su užpieštu grublėtu paviršiumi." +msgstr[1] "%1$d objektai buvo įkelti su užpieštu grublėtu paviršiumi." +msgstr[2] "%1$d objektų buvo įkelta su užpieštu grublėtu paviršiumi." msgid "ERROR" -msgstr "ERRORE" +msgstr "KLAIDA" msgid "COMPLETED" -msgstr "COMPLETATO" +msgstr "UŽBAIGTA" msgid "CANCELED" -msgstr "ANNULLATO" +msgstr "ATŠAUKTA" msgid "Cancel upload" -msgstr "Annulla caricamento" +msgstr "Atšaukti įkėlimą" msgid "Jump to" -msgstr "Vai a" +msgstr "Peršokti į" msgid "Error:" -msgstr "Errore:" +msgstr "Klaida:" msgid "Warning:" -msgstr "Attenzione:" +msgstr "Dėmesio:" -msgid "Export successfully." -msgstr "Esportazione riuscita." +msgid "Exported successfully" +msgstr "Sėkmingai eksportuota" msgid "Model file downloaded." -msgstr "File del modello scaricato." +msgstr "Modelio failas parsiųstas." msgid "Serious warning:" -msgstr "Avvertimento serio:" +msgstr "Svarbus įspėjimas:" msgid " (Repair)" -msgstr " (Ripara)" +msgstr " (Taisyti)" msgid " Click here to install it." -msgstr " Clicca per installarlo." +msgstr " Spustelkite čia įdiegimui." msgid "WARNING:" -msgstr "ATTENZIONE:" +msgstr "ĮSPĖJIMAS:" -msgid "Your model needs support ! Please make support material enable." -msgstr "Il modello necessita di supporti! Abilita i materiali di supporto." +msgid "Your model needs support! Please enable support material." +msgstr "Jūsų modeliui reikalingos atramos! Įjunkite atraminę medžiagą." -msgid "Gcode path overlap" -msgstr "Sovrapposizione del percorso G-code" +msgid "G-code path overlap" +msgstr "G-kodo kelių persidengimas" msgid "Support painting" -msgstr "Pittura Supporti" +msgstr "Atramų piešimas" msgid "Color painting" -msgstr "Pittura a colori" +msgstr "Spalvų piešimas" msgid "Cut connectors" -msgstr "Taglia connettori" +msgstr "Pjūvių jungtys" msgid "Layers" -msgstr "Layer" +msgstr "Sluoksniai" msgid "Range" -msgstr "Intervallo" +msgstr "Diapazonas" msgid "" "The application cannot run normally because OpenGL version is lower than " "2.0.\n" msgstr "" -"L'applicazione non può essere eseguita normalmente perché la versione OpenGL " -"è precedente alla 2.0.\n" +"Programa negali normaliai veikti, nes OpenGL versija yra žemesnė nei 2.0.\n" msgid "Please upgrade your graphics card driver." -msgstr "Aggiorna i driver della scheda grafica." +msgstr "Prašome atnaujinti jūsų grafinės plokštės programinę įrangą." msgid "Unsupported OpenGL version" -msgstr "Versione OpenGL non supportata" +msgstr "Nepalaikoma OpenGL versija" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" -"Impossibile caricare gli shader:\n" +"Neįmanoma įkelti šeiderių:\n" "%s" msgid "Error loading shaders" -msgstr "Errore caricamento shader" +msgstr "Įkeliant šeiderius įvyko klaida" msgctxt "Layers" msgid "Top" -msgstr "Superiore" +msgstr "Viršutinis" msgctxt "Layers" msgid "Bottom" -msgstr "Inferiore" - -msgid "Enable AI monitoring of printing" -msgstr "Abilita monitoraggio AI della stampa" - -msgid "Sensitivity of pausing is" -msgstr "La sensibilità pausa è" +msgstr "Apatinis" msgid "Enable detection of build plate position" -msgstr "Abilita rilevamento posizione del piatto" +msgstr "Įjungti spausdinimo pagrindo pozicijos atpažinimą" msgid "" "The localization tag of build plate is detected, and printing is paused if " "the tag is not in predefined range." msgstr "" -"Il tag di localizzazione del piatto verrà rilevato e la stampa verrà messa " -"in pausa se il tag non rientra nell'intervallo predefinito." +"Spausdinimo pagrindo lokalizavimo žymė įjungta. Spausdinimas bus " +"pristabdytas, jei žymė išeis už nustatytų ribų." -msgid "First Layer Inspection" -msgstr "Ispezione del primo layer" +msgid "Build Plate Detection" +msgstr "" -msgid "Auto-recovery from step loss" -msgstr "Recupero automatico perdita passi" +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" -msgid "Allow Prompt Sound" -msgstr "Consenti suono di richiesta" +msgid "AI Detections" +msgstr "" -msgid "Filament Tangle Detect" -msgstr "Rilevamento del groviglio del filamento" +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Įjungti DI spausdinimo stebėjimą" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "Antgalio užsikimšimo aptikimas" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + +msgid "First Layer Inspection" +msgstr "Pirmojo sluoksnio apžiūra" + +msgid "Auto-recovery from step loss" +msgstr "Atstatymas po žingsnių praleidimo" + +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + +msgid "Allow Prompt Sound" +msgstr "Leisti garsus" + +msgid "Filament Tangle Detect" +msgstr "Aptikti gijos susipainiojimus" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "Patikrinti, ar purkštukas neužsikimšo dėl gijos ar pašalinių objektų." msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Purkštuko tipas" -msgid "Stainless Steel" -msgstr "Acciaio inox" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" -msgstr "Acciaio temprato" +msgstr "Grūdintas plienas" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Nerūdijantis plienas" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" -msgstr "Globale" +msgstr "Bendras" msgid "Objects" -msgstr "Oggetti" +msgstr "Objektai" msgid "Advance" -msgstr "Avanzato" +msgstr "Detaliau" msgid "Compare presets" -msgstr "Confronta i preset" +msgstr "Palyginti išankstinius nustatymus" msgid "View all object's settings" -msgstr "Visualizza tutte le impostazioni oggetto" +msgstr "Matyti visus objekto nustatymus" msgid "Material settings" -msgstr "" +msgstr "Medžiagos nustatymai" msgid "Remove current plate (if not last one)" -msgstr "Rimuovere la piastra corrente (se non l'ultima)" +msgstr "Pašalinti dabartinę plokštę (jei ji ne paskutinė)" msgid "Auto orient objects on current plate" -msgstr "Orienta automaticamente gli oggetti sulla piastra corrente" +msgstr "Automatiškai suorientuoti objektus dabartinėje plokštėje" msgid "Arrange objects on current plate" -msgstr "Disporre gli oggetti sulla piastra corrente" +msgstr "Išdėstyti objektus dabartinėje plokštėje" msgid "Unlock current plate" -msgstr "Sblocca la piastra corrente" +msgstr "Atrakinti dabartinę plokštę" msgid "Lock current plate" -msgstr "Piastra corrente di blocco" +msgstr "Užrakinti dabartinę plokštę" -msgid "Edit current plate name" -msgstr "Modificare il nome del piatto corrente" - -msgid "Move plate to the front" +msgid "Filament grouping" msgstr "" +msgid "Edit current plate name" +msgstr "Taisyti dabartinės plokštės pavadinimą" + +msgid "Move plate to the front" +msgstr "Perkelti plokštę į priekį" + msgid "Customize current plate" -msgstr "Personalizza la piastra corrente" +msgstr "Individualizuoti esamą plokštę" + +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" #, boost-format msgid " plate %1%:" -msgstr " Piatto %1%:" +msgstr " plokštė %1%:" msgid "Invalid name, the following characters are not allowed:" -msgstr "Nome non valido, i seguenti caratteri non sono consentiti:" +msgstr "Netinkamas pavadinimas. Neleidžiami simboliai:" msgid "Sliced Info" -msgstr "Informazioni processo" +msgstr "Sluoksniavimo informacija" msgid "Used Filament (m)" -msgstr "Filamento usato (m)" +msgstr "Naudota gija (m)" msgid "Used Filament (mm³)" -msgstr "Filamento usato (mm³)" +msgstr "Naudota gija (mm³)" msgid "Used Filament (g)" -msgstr "Filamento usato (g)" +msgstr "Naudota gija (g)" msgid "Used Materials" -msgstr "Materiali usati" +msgstr "Sunaudota medžiagų" msgid "Estimated time" -msgstr "Estimated time" +msgstr "Numatomas laikas" msgid "Filament changes" -msgstr "Cambi filamento" +msgstr "Gijos keitimai" + +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" msgid "Click to edit preset" -msgstr "Clicca per modificare il preset" +msgstr "Spustelėkite norėdami redaguoti išankstinį nustatymą" msgid "Connection" -msgstr "Connessione" +msgstr "Ryšys" -msgid "Bed type" -msgstr "Tipo di piatto" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" -msgstr "Volumi di spurgo" +msgstr "Valymo tūriai" msgid "Add one filament" -msgstr "Aggiungere un filamento" +msgstr "Pridėti vieną giją" msgid "Remove last filament" -msgstr "Rimuovi ultimo filamento" +msgstr "Pašalinti paskutinę giją" msgid "Synchronize filament list from AMS" -msgstr "Sincronizza l'elenco filamenti da AMS" +msgstr "Sinchronizuoti gijų sąrašą iš AMS" msgid "Set filaments to use" -msgstr "Imposta filamenti da usare" +msgstr "Nustatyti gijas naudojimui" msgid "Search plate, object and part." -msgstr "Cerca piastra, oggetto e parte." +msgstr "Plokštės, objekto ir dalies paieška." msgid "Pellets" -msgstr "" +msgstr "Granulės" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Nessun filamento AMS. Selezionare una stampante nella pagina 'Dispositivo' " -"per caricare le informazioni AMS." - -msgid "Sync filaments with AMS" -msgstr "Sincronizza filamenti con AMS" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"La sincronizzazione filamenti con AMS eliminerà tutti i preset e i colori " -"dei filamenti attualmente selezionati. Vuoi continuare?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"È già stata effettuata una sincronizzazione; si desidera sincronizzare solo " -"le modifiche o tutto?" - -msgid "Sync" -msgstr "Sincronizza" - -msgid "Resync" -msgstr "Risincronizza" msgid "There are no compatible filaments, and sync is not performed." -msgstr "" -"Non ci sono filamenti compatibili, la sincronizzazione non viene eseguita." +msgstr "Čia nėra suderinamų gijų, sinchronizacija nebuvo atlikta." + +msgid "Sync filaments with AMS" +msgstr "Sinchronizuoti gijas su AMS" msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Ci sono alcuni filamenti sconosciuti mappati su un preset generico. Aggiorna " -"Snapmaker Orca o riavvia Snapmaker Orca per verificare se è presente un " -"aggiornamento delle impostazioni di sistema." #, boost-format msgid "Do you want to save changes to \"%1%\"?" -msgstr "Vuoi salvare le modifiche a \"%1%\"?" +msgstr "Ar norite išsaugoti \"%1%\" pakeitimus?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" -"Smontato con successo. Il dispositivo %s (%s) può ora essere rimosso dal " -"computer in sicurezza." +"Sėkmingai atjungtas. Įrenginį %s(%s) dabar galima saugiai išimti iš " +"kompiuterio." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Espulsione del dispositivo %s (%s) non riuscita." +msgid "Ejecting of device %s (%s) has failed." +msgstr "Nepavyko išimti įrenginio %s (%s)." msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "" -"Sono stati rilevati elementi precedentemente non salvati. Vuoi ripristinarli?" +msgstr "Aptiktas ankstesnis neišsaugotas projektas. Ar norite jį atkurti?" msgid "Restore" -msgstr "Ripristina" +msgstr "Atkurti" msgid "" "The current hot bed temperature is relatively high. The nozzle may be " "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"L'attuale temperatura del piano riscaldato è relativamente alta. L'ugello " -"potrebbe essere ostruito quando si stampa questo filamento in un involucro " -"chiuso. Si prega di aprire lo sportello anteriore e/o rimuovere il vetro " -"superiore." +"Kaitinamo pagrindo temperatūra yra gana aukšta. Spausdinant šią giją " +"uždaroje kameroje, antgalis gali užsikimšti. Prašome atidaryti priekines " +"duris ir (arba) nuimti viršutinį stiklą." msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"La durezza del nozzle richiesta dal filamento è superiore a quella del " -"nozzle predefinito della stampante. Si prega di sostituire il nozzle " -"hardened o il filamento, altrimenti il nozzle si rovinerà o potrebbe " -"danneggiarsi." +"Gijai reikalingas kietesnis negu standartinis šio spausdintuvo antgalis. " +"Norint išvengti antgalio dilimo ar pažeidimo, rekomenduojama pakeisti esamą " +"antgalį į kietesnį, arba naudoti kitą giją, kuriai tinka standartinis " +"antgalis." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " "It is recommended to change to smooth mode." msgstr "" -"L'attivazione della fotografia timelapse tradizionale può causare " -"imperfezioni della superficie. Si consiglia di passare alla modalità smooth." +"Įjungus standartinę pakadrinę fotografiją galimi paviršiaus nelygumai. " +"Rekomenduojama perjungti į glotnų režimą." + +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" msgid "Expand sidebar" -msgstr "Espandi barra laterale" +msgstr "Išskleisti šoninę juostą" msgid "Collapse sidebar" -msgstr "Riduci barra laterale" +msgstr "Sutraukti šoninę juostą" + +msgid "Tab" +msgstr "Tab" #, c-format, boost-format msgid "Loading file: %s" -msgstr "Caricamento file: %s" +msgstr "Įkeliamas failas: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "Il 3mf non proviene da Snapmaker Orca, carica solo dati geometrici." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "3MF nepalaikomas Snapmaker Orca. Įkeliami tik geometrijos duomenys." -msgid "Load 3mf" -msgstr "Carica 3mf" +msgid "Load 3MF" +msgstr "Įkelti 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" +"Šis projektas buvo sukurtas naudojant „Snapmaker Orca 2.3.1-alpha“ ir jame " +"naudojami užpildymo rotacijos šablono nustatymai, kurie gali neveikti " +"tinkamai su jūsų dabartiniu užpildymo modeliu. Dėl to gali atsirasti silpnos " +"atramos arba spausdinimo kokybės problemos." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Ar norėtumėte, kad „Snapmaker Orca“ automatiškai ištaisytų šią problemą, " +"išvalydamas sukimosi šablono nustatymus?" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" -msgstr "" -"Versione del 3mf %s è più recente %s della versione %s, trovate le seguenti " -"chiavi non riconosciute:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "3mf versija %s yra naujesnė už %s versiją %s, rasta nepažįstamų raktų:" msgid "You'd better upgrade your software.\n" -msgstr "Devi aggiornare il software.\n" +msgstr "Geriau jau atnaujinkite savo programinę įrangą\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Versione del 3mf %s è più recente della versione %s di %s, si consiglia di " -"aggiornare il software." +"3MF failo versija %s yra naujesnė nei %s versija %s. Siūloma atnaujinti jūsų " +"programinę įrangą." -msgid "Invalid values found in the 3mf:" -msgstr "Valori non validi trovati in 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "3MF rasti netinkami duomenys:" msgid "Please correct them in the param tabs" -msgstr "Si prega di correggerli nella scheda dei Parametri" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "" -"Il 3mf ha i seguenti codici G modificati nei preset del filamento o della " -"stampante:" +msgstr "Prašome juos ištaisyti parametrų skirtukuose" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"Si prega di confermare che questi G-code modificati sono sicuri per evitare " -"danni alla macchina!" - -msgid "Modified G-codes" -msgstr "G-code Modificati" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "" -"Il 3mf ha i seguenti filamenti personalizzati o preimpostazioni della " -"stampante:" +"3MF faile yra šie modifikuoti G-kodai gijos ar spausdintuvo iš anksto " +"nustatytuose parametruose:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "" +"Prašome patvirtinti, kad šie modifikuoti G-kodai yra saugūs ir nesugadins " +"jūsų įrangos!" + +msgid "Modified G-code" +msgstr "Modifikuotas G-kodas" + +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "3MF faile yra pakeistų gijos ar spausdinimo nustatymų:" + +msgid "" +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Si prega di confermare che i G-code all'interno di queste preimpostazioni " -"sono sicuri per evitare danni alla macchina!" +"Prašome patvirtinti, kad šiuose nustatymuose esantys G-kodai yra saugūs ir " +"nesugadins jūsų įrangos!" msgid "Customized Preset" -msgstr "Preset personalizzato" +msgstr "Pakeisti nustatymai" -msgid "Name of components inside step file is not UTF8 format!" -msgstr "" -"Il nome/i del componente all'interno del file step non è in formato UTF8!" +msgid "Name of components inside STEP file is not UTF8 format!" +msgstr "Komponentų pavadinimai STEP faile nėra UTF-8 formato!" msgid "The name may show garbage characters!" -msgstr "" -"A causa di una codifica del testo non supportata, potrebbero apparire " -"caratteri inutili!" +msgstr "Pavadinimas gali rodyti neskaitomus simbolius!" msgid "Remember my choice." -msgstr "Ricorda la mia scelta." +msgstr "Prisiminti pasirinkimus." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "" -"Caricamento del file \"%1%\" non riuscito. Trovata configurazione non valida." +msgstr "Nepavyko įkelti \"%1%\" failo. Aptikta netinkama konfigūracija." msgid "Objects with zero volume removed" -msgstr "Oggetti con volume zero rimossi" +msgstr "Nulinio tūrio objektai pašalinti" msgid "The volume of the object is zero" -msgstr "Il volume dell'oggetto è zero" +msgstr "Objekto tūris nulinis" #, c-format, boost-format msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" -"L'oggetto del file %s è troppo piccolo e può essere in metri o pollici.\n" -" Si desidera scalare in millimetri?" +"Objektas iš failo „%s“ yra per mažas ir galimai nurodytas metrais arba " +"coliais.\n" +"Ar norite mastelį pakeisti į milimetrus?" msgid "Object too small" -msgstr "Oggetto troppo piccolo" +msgstr "Objektas per mažas" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" -"Il file contiene oggetti posizionati ad altezze diverse.\n" -"Invece di considerarli come oggetti multipli, è necessario\n" -"considerarlo come singolo oggetto con più parti?" +"Šiame faile yra keli objektai, išdėstyti keliuose aukščiuose.\n" +"Ar užuot laikius juos atskirais objektais, reikėtų\n" +"įkelti failą kaip vieną objektą, turintį kelias dalis?" msgid "Multi-part object detected" -msgstr "Rilevato oggetto in più parti" +msgstr "Aptiktas kelių dalių objektas" msgid "Load these files as a single object with multiple parts?\n" -msgstr "Caricare questi file come un singolo oggetto con più parti?\n" +msgstr "Ar įkelti šiuos failus kaip vieną objektą su keliomis detalėmis?\n" msgid "Object with multiple parts was detected" -msgstr "È stato rilevato un oggetto con più parti" +msgstr "Aptiktas objektas su keliomis detalėmis" -msgid "The file does not contain any geometry data." -msgstr "Il file non contiene dati geometrici." +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" -"L'oggetto sembra troppo grande. Vuoi ridimensionarlo per adattarlo " -"automaticamente al piatto di stampa?" + +msgid "The file does not contain any geometry data." +msgstr "Faile nėra jokių geometrinių duomenų." + +msgid "" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" +msgstr "" +"Jūsų objektas per didelis. Ar norite jį sumažinti automatiškai, kad tilptų " +"ant spausdinimo plokštės?" msgid "Object too large" -msgstr "Oggetto troppo grande" +msgstr "Objektas per didelis" msgid "Export STL file:" -msgstr "Esporta file STL:" +msgstr "Eksportuoti STL failą:" msgid "Export AMF file:" -msgstr "Esporta file AMF:" +msgstr "Eksportuoti AMF failą:" msgid "Save file as:" -msgstr "Salva come:" +msgstr "Išsaugoti failą kaip:" msgid "Export OBJ file:" -msgstr "Esporta file OBJ:" +msgstr "Eksportuoti OBJ failą:" #, c-format, boost-format msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" -"Il file %s esiste già\n" -"Vuoi sostituirlo?" +"Failas %s jau yra\n" +"Ar norite jį perrašyti?" msgid "Confirm Save As" -msgstr "Confirm Salva con nome" +msgstr "Patvirtinti Išsaugoti kaip" msgid "Delete object which is a part of cut object" -msgstr "Elimina l'oggetto che fa parte dell'oggetto tagliato" +msgstr "Pašalinti objektą su dalimi perpjauto objekto" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"Stai cercando di eliminare un oggetto che fa parte di un oggetto tagliato.\n" -"Questa azione interromperà la corrispondenza tra gli oggetti tagliati.\n" -"In seguito, la coerenza del modello non può essere garantita." +"Bandote ištrinti objektą, kuris yra supjaustyto objekto dalis.\n" +"Šis veiksmas sugadins pjovimo atitikimą.\n" +"Po šio veiksmo modelio vientisumas negali būti garantuotas." msgid "The selected object couldn't be split." -msgstr "L'oggetto selezionato non può essere diviso." +msgstr "Pasirinkto objekto negalima suskaidyti." msgid "Another export job is running." -msgstr "È in esecuzione un altro processo di esportazione." +msgstr "Vyksta kitas eksportavimo procesas." msgid "Unable to replace with more than one volume" -msgstr "Impossibile sostituire con più di un volume" +msgstr "Nepavyko pakeisti daugiau nei vienu tomu" msgid "Error during replace" -msgstr "Errore durante la sostituzione" +msgstr "Klaida keičiant" msgid "Replace from:" -msgstr "Sostituisci da:" +msgstr "Pakeisti iš:" msgid "Select a new file" -msgstr "Seleziona nuovo file" +msgstr "Pasirinkite naują failą" msgid "File for the replace wasn't selected" -msgstr "Il file per la sostituzione non è stato selezionato" +msgstr "Nepasirinktas keičiamas failas" + +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" msgid "Please select a file" -msgstr "Seleziona file" +msgstr "Prašome pasirinkti failą" msgid "Do you want to replace it" -msgstr "Vuoi sostituirlo" +msgstr "Ar norite jį pakeisti?" msgid "Message" -msgstr "Messaggio" +msgstr "Pranešimas" msgid "Reload from:" -msgstr "Ricarica da:" +msgstr "Įkelti iš naujo iš:" msgid "Unable to reload:" -msgstr "Impossibile ricaricare:" +msgstr "Nepavyko įkelti iš naujo:" msgid "Error during reload" -msgstr "Errore durante il ri-caricamento" +msgstr "Klaida įkeliant iš naujo" msgid "There are warnings after slicing models:" -msgstr "Ci sono avvisi dopo aver elaborato i modelli:" +msgstr "Po sluoksniavimo yra įspėjimų:" msgid "warnings" -msgstr "Avvisi" +msgstr "įspėjimai" msgid "Invalid data" -msgstr "Dati non validi" +msgstr "Netinkami duomenys" msgid "Slicing Canceled" -msgstr "Slicing Annullato" +msgstr "Sluoksniavimas atšauktas" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Slicing Piatto %d" +msgstr "Sluoksniuojama plokštė %d" msgid "Please resolve the slicing errors and publish again." -msgstr "Risolvi gli errori di slicing e pubblica nuovamente." +msgstr "Prašome sutvarkyti sluoksniavimo klaidas ir publikuoti dar kartą." msgid "" "Network Plug-in is not detected. Network related features are unavailable." msgstr "" -"Il plug-in di rete non è stato rilevato. Le funzioni di rete non sono " -"disponibili." +"Neaptiktas tinklo įskiepis. Nebus pasiekiamos su tinklu susijusios galimybės." msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." +msgstr "" +"Tik peržiūros režimas:\n" +"Įkeltas failas turi tik G-kodą. Negalima pereiti į Paruošimo režimą." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" msgstr "" -"Modalità solo anteprima:\n" -"Il file caricato contiene solo G-code, non può accedere alla pagina Prepara" msgid "You can keep the modified presets to the new project or discard them" msgstr "" -"È possibile conservare i preset modificati per il nuovo progetto o eliminarli" +"Jūs galite išsaugoti pakeistus nustatymus naujam projektui arba juos ištrinti" msgid "Creating a new project" -msgstr "Creazione nuovo progetto" +msgstr "Naujo projekto kūrimas" msgid "Load project" -msgstr "Carica progetto" +msgstr "Įkelti projektą" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs open the " "project file." msgstr "" -"Non è stato possibile salvare il progetto.\n" -"Verificare se online la cartella esiste o se altri programmi hanno aperto il " -"file del progetto." +"Nepavyko išsaugoti projekto.\n" +"Prašome patikrinti, ar nurodytas katalogas egzistuoja tinkle ir ar kitos " +"programos nenaudoja projekto failo." msgid "Save project" -msgstr "Salva progetto" +msgstr "Išsaugoti projektą" msgid "Importing Model" -msgstr "Importazione del modello" +msgstr "Importuojamas modelis" -msgid "prepare 3mf file..." -msgstr "preparazione file 3mf..." +msgid "prepare 3MF file..." +msgstr "paruošti 3MF failą..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "Atsisuntimas nepavyko, nežinomas failo tipas." -msgid "downloading project ..." -msgstr "Download progetto..." +msgid "downloading project..." +msgstr "projektas atsisiunčiamas..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "Atsisiųsti nepavyko. Failo dydžio išimtis." #, c-format, boost-format msgid "Project downloaded %d%%" -msgstr "Progetto scaricato %d%%" +msgstr "Projektas atsisiųstas %d%%" msgid "" "Importing to Snapmaker Orca failed. Please download the file and manually " "import it." msgstr "" -"L'importazione di Snapmaker Orca non è riuscita. Si prega di scaricare il file " -"e importarlo manualmente." +"Nepavyko importuoti į Snapmaker Orca. Prašome atsisiųsti failą ir rankiniu būdu " +"jį importuoti." + +msgid "INFO:" +msgstr "INFO:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Kalibravimui nepateikti jokie pagreičiai. Naudokite numatytąją pagreičio " +"vertę " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "Kalibravimo greičiai nenumatyti. Naudokite numatytąjį optimalų greitį " msgid "Import SLA archive" -msgstr "Importa archivio SLA" +msgstr "Importuoti SLA archyvą" msgid "The selected file" -msgstr "Il file selezionato" +msgstr "Pasirinktame faile" -msgid "does not contain valid gcode." -msgstr "non contiene un g-code valido." +msgid "does not contain valid G-code." +msgstr "nėra galiojančio G-kodo." msgid "Error occurs while loading G-code file" -msgstr "Si è verificato un errore durante il caricamento del file G-code." +msgstr "Įkeliant G-kodo failą įvyko klaida" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "Il caricamento di un archivio zip sul percorso %1% non è riuscito." +msgstr "Nepavyko įkelti %1% esančio ZIP archyvo." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" -msgstr "Impossibile decomprimere il file su %1%: %2%" +msgstr "Nepavyko išskleisti zip failo į %1%: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." -msgstr "" -"Impossibile trovare il file decompresso su %1%. La decompressione del file " -"non è riuscita." +msgstr "Nepavyko %1% rasti išskleisto zip failo. Nepavyko išskleisti failo." msgid "Drop project file" -msgstr "Elimina il file di progetto" +msgstr "Užmeskite projekto failą" msgid "Please select an action" -msgstr "Seleziona un'azione" +msgstr "Prašome pasirinkti veiksmą" msgid "Open as project" -msgstr "Apri come progetto" +msgstr "Atidaryti kaip projektą" msgid "Import geometry only" -msgstr "Importa solo la geometria" +msgstr "Importuoti tik geometriją" msgid "Only one G-code file can be opened at the same time." -msgstr "È possibile aprire un solo file G-code alla volta." +msgstr "Vienu metu gali būti atidarytas tik vienas G-kodo failas." msgid "G-code loading" -msgstr "Caricamento G-code" +msgstr "Įkeliamas G-kodas" -msgid "G-code files can not be loaded with models together!" -msgstr "I file e i modelli G-code non possono essere caricati insieme!" +msgid "G-code files cannot be loaded with models together!" +msgstr "G-kodas negali būti įkeltas kartu su modeliais!" -msgid "Can not add models when in preview mode!" -msgstr "Impossibile aggiungere modelli in modalità anteprima!" +msgid "Cannot add models when in preview mode!" +msgstr "Negalima pridėti modelių peržiūros režime!" msgid "All objects will be removed, continue?" -msgstr "Saranno rimossi tutti gli oggetti, continuare?" +msgstr "Visi objektai bus pašalinti, ar tęsti?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" -"Il progetto corrente ha modifiche non salvate. Desideri salvarle prima di " -"continuare?" +"Dabartiniame projekte yra neišsaugotų pakeitimų. Ar išsaugoti prieš tęsiant?" msgid "Number of copies:" -msgstr "Numero di copie:" +msgstr "Kopijų skaičius:" msgid "Copies of the selected object" -msgstr "Copie dell'oggetto selezionato" +msgstr "Pasirinkto objekto kopijos" msgid "Save G-code file as:" -msgstr "Salva il file G-code come:" +msgstr "Išsaugoti G-kodo failą kaip:" msgid "Save SLA file as:" -msgstr "Salva il file SLA come:" +msgstr "Išsaugoti SLA failą kaip:" msgid "The provided file name is not valid." -msgstr "Il nome del file fornito non è valido." +msgstr "Pateiktas failo pavadinimas netinkamas." msgid "The following characters are not allowed by a FAT file system:" -msgstr "I seguenti caratteri non sono permessi da un file system FAT:" +msgstr "FAT failų sistemoje neleidžiami šie simboliai:" msgid "Save Sliced file as:" -msgstr "Salva file elaborato come:" +msgstr "Išsaugoti susluoksniuotą failą kaip:" #, c-format, boost-format msgid "" "The file %s has been sent to the printer's storage space and can be viewed " "on the printer." msgstr "" -"Il file %s è stato inviato allo spazio di memoria della stampante e può " -"essere visualizzato sulla stampante." +"Failas %s išsiųstas į spausdintuvo saugyklą ir gali būti peržiūrimas " +"spausdintuve." + +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." +"Nepavyksta atlikti loginės operacijos su modelio tinkleliais. Bus išsaugotos " +"tik teigiamos dalys. Galite pataisyti tinklelius ir bandyti dar kartą." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "Priežastis: tuščia \"%1%\" detalė." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "\"Priežastis: dalis \"%1%\" neapibrėžia tūrio." #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "Priežastis: dalis \"%1%\" kertasi su savimi." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "Priežastis: \"%1%\" ir kita dalis nesikerta." msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Impossibile eseguire operazioni booleane sulle mesh del modello. Verranno " -"esportate solo le parti positive." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Sei sicuro di voler memorizzare gli SVG originali con i loro percorsi locali " -"nel file 3MF?\n" -"Se premi \"NO\", tutti gli SVG del progetto non saranno più modificabili." - -msgid "Private protection" -msgstr "Protezione privata" +"Nepavyksta atlikti loginės operacijos su modelio figūromis. Eksportuojamos " +"tik teigiamos dalys." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" -"La stampante è pronta? La piastra di stampa è in posizione, vuota e pulita?" +"Ar spausdintuvas pasiruošęs? Ar spausdinimo plokštuma yra vietoje, tuščia ir " +"švari?" msgid "Upload and Print" -msgstr "Carica e Stampa" +msgstr "Įkelti ir spausdinti" + +msgid "Abnormal print file data. Please slice again" +msgstr "" +"Nenormalūs spausdinimo failo duomenys. Atlikite sluoksniavimą dar kartą" msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" -"Stampa per oggetto: \n" -"Ti consigliamo di utilizzare la disposizione automatica per evitare " -"collisioni durante la stampa." +"Spausdinimas pagal objektus:\n" +"Siekiant spausdinant išvengti susidūrimų, patariama naudoti automatinį " +"išdėstymą." msgid "Send G-code" -msgstr "Invia G-code" +msgstr "Siųsti G-kodą" msgid "Send to printer" -msgstr "Manda alla stampante" +msgstr "Siųsti į spausdintuvą" msgid "Custom supports and color painting were removed before repairing." -msgstr "" -"I supporti personalizzati e la pittura a colori sono stati rimossi prima " -"della riparazione." +msgstr "Prieš taisymą pašalintos pasirinktinės aramos ir dažymas spalvomis." msgid "Optimize Rotation" -msgstr "Ottimizza rotazione" +msgstr "Optimizuoti sukimąsi" -msgid "Invalid number" -msgstr "Numero non valido" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" -msgstr "Impostazioni Piatto" +msgstr "Plokštės parametrai" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Numero attuale di parti selezionate: %1%\n" +msgstr "Dabar pasirinktų detalių skaičius: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "Numero di oggetti attualmente selezionati: %1%\n" +msgstr "Dabar pasirinktų objektų skaičius: %1%\n" #, boost-format msgid "Part name: %1%\n" -msgstr "Nome parte: %1%\n" +msgstr "Detalės pavadinimas: %1%\n" #, boost-format msgid "Object name: %1%\n" -msgstr "Nome oggetto: %1%\n" +msgstr "Objekto pavadinimas: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" -msgstr "Dimensioni: %1% x %2% x %3% in\n" +msgstr "Dydis: %1% x %2% x %3% col\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" -msgstr "Dimensioni: %1% x %2% x %3% mm\n" +msgstr "Dydis: %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" -msgstr "Volume: %1% in³\n" +msgstr "Tūris: %1% col³\n" #, boost-format msgid "Volume: %1% mm³\n" -msgstr "Volume: %1% mm³\n" +msgstr "Tūris: %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" -msgstr "Triangoli: %1%\n" - -msgid "Tips:" -msgstr "Suggerimenti:" +msgstr "Trikampių: %1%\n" msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" -"La funzione \"Correggi modello\" è attualmente disponibile solo su Windows. " -"Si prega di riparare il modello su Snapmaker Orca (Windows) o software CAD." +"Funkcija „Pataisyti modelį“ šiuo metu pasiekiama tik „Windows“. Pataisykite " +"modelį „Snapmaker Orca“ („Windows“) arba CAD programinėje įrangoje." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Piatto% d: %s non è consigliato per l’utilizzo del filamento %s (%s). Se " -"desideri continuare, imposta la temperatura del piano di questo filamento su " -"un numero diverso da zero." - -msgid "Switching the language requires application restart.\n" -msgstr "Il cambio lingua richiede il riavvio dell'applicazione.\n" - -msgid "Do you want to continue?" -msgstr "Vuoi continuare?" - -msgid "Language selection" -msgstr "Selezione lingua" - -msgid "Switching application language while some presets are modified." -msgstr "Cambio lingua applicazione durante la modifica di alcuni preset." - -msgid "Changing application language" -msgstr "Modifica lingua applicazione" - -msgid "Changing the region will log out your account.\n" -msgstr "La modifica della regione ti disconnetterà dal tuo account.\n" - -msgid "Region selection" -msgstr "Selezione Paese" - -msgid "Second" -msgstr "Secondo" - -msgid "Browse" -msgstr "Sfoglia" - -msgid "Choose Download Directory" -msgstr "Scegliere la directory di download" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "Impostazioni generali" - -msgid "Asia-Pacific" -msgstr "Asia-Pacific" - -msgid "China" -msgstr "China" - -msgid "Europe" -msgstr "Europe" - -msgid "North America" -msgstr "North America" - -msgid "Others" -msgstr "Altro" - -msgid "Login Region" -msgstr "Regione di accesso" - -msgid "Stealth Mode" -msgstr "Modalità invisibile" +"Plokštė %d: %s nesiūloma naudoti spausdinant gijomis %s(%s). Jei vis tiek " +"norite spausdinti, nustatykite nenulinę pagrindo šiai gijai temperatūrą." msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." msgstr "" -msgid "Enable network plugin" -msgstr "Abilita plugin di rete" +msgid "Not available" +msgstr "" -msgid "Check for stable updates only" -msgstr "Verifica solo la disponibilità di aggiornamenti stabili" +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + +msgid "Switching the language requires application restart.\n" +msgstr "Kalbos keitimas reikalauja programos paleidimo iš naujo.\n" + +msgid "Do you want to continue?" +msgstr "Ar norite tęsti?" + +msgid "Language selection" +msgstr "Kalbos pasirinkimas" + +msgid "Switching application language while some presets are modified." +msgstr "Keičiama programos kalba esant kai kurių nustatymų pakeitimams." + +msgid "Changing application language" +msgstr "Keičiama programos kalba" + +msgid "Asia-Pacific" +msgstr "Azija-Ramusis vandenynas" + +msgid "China" +msgstr "Kinija" + +msgid "Europe" +msgstr "Europa" + +msgid "North America" +msgstr "Šiaurės Amerika" + +msgid "Others" +msgstr "Kita" + +msgid "Changing the region will log out your account.\n" +msgstr "Keičiant regioną bus atjungta jūsų paskyra.\n" + +msgid "Region selection" +msgstr "Regiono pasirinkimas" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Atsarginės kopijos kūrimo laikotarpis sekundėmis." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" + +msgid "Browse" +msgstr "Naršyti" + +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Pasirinkite parsisiuntimo katalogą" + +msgid "Associate" +msgstr "Susietas" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "su \"Snapmaker Orca\", kad \"Orca\" galėtų atverti modelius iš" + +msgid "Current Association: " +msgstr "Dabartinis susiejimas: " + +msgid "Current Instance" +msgstr "Dabartinė versija" + +msgid "Current Instance Path: " +msgstr "Dabartinės versijos kelias: " + +msgid "General" +msgstr "Bendras" msgid "Metric" -msgstr "Metrico" +msgstr "Metrinė" msgid "Imperial" -msgstr "Imperiale" +msgstr "Imperinė" msgid "Units" -msgstr "Unità" +msgstr "Vienetai" + +msgid "Home" +msgstr "Pradžia" + +msgid "Default page" +msgstr "Numatytas puslapis" + +msgid "Set the page opened on startup." +msgstr "Nustatyti, kuris puslapis atsidarys paleidus programą." + +msgid "Enable dark mode" +msgstr "Įjungti tamsųjį režimą" msgid "Allow only one Snapmaker Orca instance" -msgstr "" +msgstr "Leisti tik vieną Snapmaker Orca egzempliorių" msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"Su OSX per impostazione predefinita c'è sempre una sola istanza dell'app in " -"esecuzione. Tuttavia è consentito eseguire più istanze della stessa app da " -"riga di comando. In tal caso, questa impostazione consentirà una sola " -"istanza." +"OSX visada veikia tik vienas programos egzempliorius pagal numatytuosius " +"nustatymus. Tačiau komandinėje eilutėje leidžiama paleisti kelis tos pačios " +"programos egzempliorius. Šiuo atveju nustatymai leis tik vieną egzempliorių." msgid "" "If this is enabled, when starting Snapmaker Orca and another instance of the " "same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" +"Jei įjungta, paleidus „Snapmaker Orca“ kai kitas tos pačios „Snapmaker Orca“ " +"programos egzempliorius jau veikia, bus suaktyvintas tas jau veikiantis " +"egzempliorius, o ne paleistas naujas." -msgid "Home" -msgstr "Home" +msgid "Show splash screen" +msgstr "Rodyti paleidimo ekraną" -msgid "Default Page" -msgstr "Pagina predefinita" +msgid "Show the splash screen during startup." +msgstr "Paleidžiant programą rodyti informacinį ekramą." -msgid "Set the page opened on startup." -msgstr "Imposta la pagina aperta all'avvio." +msgid "Downloads folder" +msgstr "Atsisiuntimų aplankas" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Įkelti viską" + +msgid "Ask When Relevant" +msgstr "Klausti, kai aktualu" + +msgid "Always Ask" +msgstr "Visada klausti" + +msgid "Load Geometry Only" +msgstr "Įkelti tik geometriją" + +msgid "Load behaviour" +msgstr "Įkelti elgseną" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"Ar atidarant .3mf failą reikia įkelti spausdintuvo / gijų / proceso " +"nustatymus?" + +msgid "Maximum recent files" +msgstr "Maksimalus naujausių failų skaičius" + +msgid "Maximum count of recent files" +msgstr "Maksimalus naujausių failų skaičius" + +msgid "Add STL/STEP files to recent files list" +msgstr "Pridėti STL/STEP failus į naujausių failų sąrašą" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Nerodyti perspėjimų įkeliant 3MF su modifikuotais G-kodais" + +msgid "Show options when importing STEP file" +msgstr "Rodyti parinktis importuojant STEP failą" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Jei įjungta, STEP failo importavimo metu atsiras parametrų nustatymų " +"dialogas." + +msgid "Auto backup" +msgstr "Automatinis atsarginis kopijavimas" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Periodiškai saugoti jūsų projekto atsargines kopijas kad programos gedimo " +"atveju jį būtų galima atkurti." + +msgid "Preset" +msgstr "Profilis" + +msgid "Remember printer configuration" +msgstr "Atsiminti spausdintuvo konfigūraciją" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Jei įjungta, Snapmaker Orca automatiškai prisimins ir perjungs gijos ir proceso " +"konfigūracijas kiekvienams spausdintuvui." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Kelių įrenginių valdymas" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Kai įjungta ši funkcija, jūs galite siųsti užduotį keliems įrenginiams vienu " +"metu, taip apt kontroliuoti keletą įrenginių." + +msgid "(Requires restart)" +msgstr "(Reikia paleisti iš naujo)" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "Elgsena" + +msgid "All" +msgstr "Visi" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Automatinis plokštės sutvarkymas po klonavimo" msgid "Touchpad" -msgstr "" +msgstr "Jutiklinis kilimėlis" msgid "Camera style" -msgstr "" +msgstr "Kameros stilius" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +"Pasirinkite kameros valdymo stilių.\n" +"Numatytasis: Kairysis pelės mygtukas + judinti - sukimui, dešinys pelės " +"mygtukas / vidurinis pelės mygtukas + judinti - perkėlimui.\n" +"Jutiklinis kilimėlis: Alt + judinti - sukimui, Shift + judinti - perkėlimui." + +msgid "Orbit speed multiplier" +msgstr "Orbitos greičio daugiklis" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" +"Padidina orbitos greitį, kad kameros judesiai būtų tikslesni arba grubesni." msgid "Zoom to mouse position" -msgstr "Zoom posizione del mouse" +msgstr "Išdidinti iki pelės vietos" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Ingrandisci verso la posizione del puntatore del mouse nella vista 3D, " -"anziché verso il centro della finestra 2D." +"\"Priartinti prie pelės rodiklio padėties 3D vaizde, o ne prie 2D lango " +"centro." msgid "Use free camera" -msgstr "Usa l'inquadratura libera" +msgstr "Naudoti laisvą kamerą" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" -"Se attivo, usa la visuale libera. Se non attivo, usa la visuale vincolata." +"Jei įjungta, naudoti laisvą kamerą. Jei neįjungta, naudoti stacionarią " +"kamerą." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Sukeisti judėjimą ir sukimąsi pelės mygtuko" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Jei įjungta, sukeičia kairiojo ir dešiniojo pelės mygtukų panoraminio ir " +"pasukimo funkcijas." msgid "Reverse mouse zoom" -msgstr "" +msgstr "Apversti pelės didinimą" msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "Jei įjungta, apverčia didinimo ar mažinimo kryptį pelės ratuku." + +msgid "Clear my choice on..." msgstr "" -msgid "Show splash screen" -msgstr "Mostra splash screen" - -msgid "Show the splash screen during startup." -msgstr "Mostra la schermata iniziale durante l'avvio." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Mostra \"Suggerimento del giorno\" dopo l'avvio" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Se abilitato, all'avvio vengono visualizzati suggerimenti utili." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Unsaved projects" msgstr "" -"Volumi di Spurgo: Calcola automaticamente ogni volta che il colore cambia." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Se abilitato, calcola automaticamente ogni volta che il colore cambia." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" -msgstr "" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" -msgstr "Rete" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Sincronizzazione automatica preset utente (stampante/filamento/processo)" - -msgid "User Sync" -msgstr "User Sync" - -msgid "Update built-in Presets automatically." -msgstr "Aggiorna automaticamente i preset." - -msgid "System Sync" -msgstr "Sincronizzazione sistema" - -msgid "Clear my choice on the unsaved presets." -msgstr "Cancella la mia scelta sui preset non salvati." - -msgid "Associate files to Snapmaker Orca" -msgstr "Associate files to Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Associare file .3mf a Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .3mf." - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Associate .stl files to Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .stl." - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Associate .step/.stp files to Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "" -"Se abilitata, imposta Snapmaker Orca come applicazione predefinita per aprire " -"\"\n" -"\"i file .step." - -msgid "Associate web links to Snapmaker Orca" -msgstr "" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "Numero massimo di progetti recenti" - -msgid "Maximum count of recent projects" -msgstr "Numero massimo di progetti recenti" msgid "Clear my choice on the unsaved projects." -msgstr "Cancella la mia scelta sui progetti non salvati." +msgstr "Išvalyti mano pasirinkimus neišsaugotuose projektuose." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Nessun avviso durante il caricamento di 3MF con codici G modificati" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "Backup automatico" +msgid "Clear my choice on the unsaved presets." +msgstr "Išvalyti mano pasirinkimą neišsaugotuose nustatymuose." + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Esegui periodicamente il backup del tuo progetto per facilitare il " -"ripristino dopo un crash occasionale." -msgid "every" -msgstr "Ogni" +msgid "Login region" +msgstr "Prisijungimo regionas" -msgid "The peroid of backup in seconds." -msgstr "Periodo di backup in secondi." +msgid "Stealth mode" +msgstr "Slaptas režimas" -msgid "Downloads" -msgstr "Scaricati" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Įjungus šią funkciją, sustabdomas duomenų perdavimas į „Bambu“ debesijos " +"paslaugas. Šią funkciją gali drąsiai įjungti naudotojai, kurie nesinaudoja " +"„BBL“ įrenginiais arba naudoja tik LAN režimą." -msgid "Dark Mode" -msgstr "Modalità Scura" +msgid "Network test" +msgstr "Tinklo testas" -msgid "Enable Dark mode" -msgstr "Attiva modalità Scura" +msgid "Test" +msgstr "Testas" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Tikrinti tik stabilius atnaujinimus" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Automatiškai sinchronizuoti naudotojo nustatymus (spausdintuvas/gija/" +"procesas)" + +msgid "Update built-in Presets automatically." +msgstr "Automatinis įmontuotų nustatymų atnaujinimas." + +msgid "Network plugin" +msgstr "Tinklo įskiepis" + +msgid "Enable network plugin" +msgstr "Įjungti tinklo papildinį" + +msgid "Use legacy network plugin" +msgstr "Naudoti senąjį tinklo įskiepį" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" +"Išjunkite, kad galėtumėte naudoti naujausią tinklo įskiepį, kuris palaiko " +"naujas „BambuLab“ programinės įrangos versijas." + +msgid "Associate files to Snapmaker Orca" +msgstr "Susieti failus su Snapmaker Orca" + +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Susieti .3mf failus su Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "" +"Jei įjungta, \"Snapmaker Orca\" nustatoma kaip numatytasis .3mf failų atidarymo " +"įrankis" + +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" +msgstr "Susieti .stl failus su Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "" +"Jei įjungta, \"Snapmaker Orca\" nustatoma kaip numatytoji programa .stl failams " +"atverti" + +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Susieti .step/.stp failus su Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "" +"Jei įjungta, \"Snapmaker Orca\" nustatoma kaip numatytoji programa .step " +"failams atverti" + +msgid "Associate web links to Snapmaker Orca" +msgstr "Susieti interneto nuorodas su Snapmaker Orca" + +msgid "Developer" +msgstr "" msgid "Develop mode" -msgstr "Modalità sviluppatore" +msgstr "Kūrėjo režimas" msgid "Skip AMS blacklist check" -msgstr "Salta check Blacklist AMS" +msgstr "Praleisti AMS draudžiamo sąrašo tikrinimą" -msgid "Home page and daily tips" -msgstr "Home page e suggerimenti quotidiani" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Mostra pagina iniziale all'avvio" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" -msgid "Sync settings" -msgstr "Impostazioni sincronizzazione" +msgid "Allow Abnormal Storage" +msgstr "" -msgid "User sync" -msgstr "User sync" - -msgid "Preset sync" -msgstr "Sincronizzazione preset" - -msgid "Preferences sync" -msgstr "Sincronizzazione preferenze" - -msgid "View control settings" -msgstr "Visualizza impostazioni di controllo" - -msgid "Rotate of view" -msgstr "Ruota vista" - -msgid "Move of view" -msgstr "Vista panoramica" - -msgid "Zoom of view" -msgstr "Vista Zoom" - -msgid "Other" -msgstr "Altro" - -msgid "Mouse wheel reverses when zooming" -msgstr "Reverse scroll direction while zooming" - -msgid "Enable SSL(MQTT)" -msgstr "Abilita SSL (MQTT)" - -msgid "Enable SSL(FTP)" -msgstr "Abilita SSL (FTP)" - -msgid "Internal developer mode" -msgstr "Modalità sviluppatore interno" +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" msgid "Log Level" -msgstr "Livello log" +msgstr "Žurnalų lygmuo" msgid "fatal" -msgstr "fatale" +msgstr "kritinė" msgid "error" -msgstr "Errore" +msgstr "klaida" msgid "warning" -msgstr "attenzione" +msgstr "perspėjimas" msgid "debug" -msgstr "debug" +msgstr "testavimas" msgid "trace" -msgstr "Traccia" +msgstr "sekimas" + +msgid "Debug" +msgstr "" + +msgid "Sync settings" +msgstr "Sinchronizavimo nustatymai" + +msgid "User sync" +msgstr "Naudotojo sinchronizavimas" + +msgid "Preset sync" +msgstr "Nustatymų sinchronizavimas" + +msgid "Preferences sync" +msgstr "Pasirinkimų sinchronizavimas" + +msgid "View control settings" +msgstr "Peržiūrėti valdymo nustatymus" + +msgid "Rotate of view" +msgstr "Vaizdo sukimas" + +msgid "Move of view" +msgstr "Vaizdo perkėlimas" + +msgid "Zoom of view" +msgstr "Vaizdo didinimas" + +msgid "Other" +msgstr "Kita" + +msgid "Mouse wheel reverses when zooming" +msgstr "Apversta pelės ratuko didinimo kryptis" + +msgid "Enable SSL(MQTT)" +msgstr "Įjungti SSL (MQTT)" + +msgid "Enable SSL(FTP)" +msgstr "Įjungti SSL (FTP)" + +msgid "Internal developer mode" +msgstr "Vidinio kūrėjo režimas" msgid "Host Setting" -msgstr "Impostazione host" +msgstr "Hosto nustatymai" msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "DEV host: api-dev.bambu-lab.com/v1" +msgstr "DEV hostas: api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "QA host: api-qa.bambu-lab.com/v1" +msgstr "QA hostas: api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "PRE host: api-pre.bambu-lab.com/v1" +msgstr "PRE hostas: api-pre.bambu-lab.com/v1" msgid "Product host" -msgstr "Host del prodotto" +msgstr "Produkto hostas" msgid "debug save button" -msgstr "Pulsante salvataggio debug" +msgstr "derinimo išsaugojimo mygtukas" msgid "save debug settings" -msgstr "salva impostazioni debug" +msgstr "išsaugoti testavimo nuostatas" -msgid "DEBUG settings have saved successfully!" -msgstr "Le impostazioni di debug sono state salvate correttamente!" +msgid "DEBUG settings have been saved successfully!" +msgstr "TESTAVIMO nuostatos sėkmingai išsaugotos!" -msgid "Switch cloud environment, Please login again!" -msgstr "Cambia ambiente cloud; Effettua nuovamente il login!" +msgid "Cloud environment switched, please login again!" +msgstr "Pakeista debesų aplinka, prašome prisijungti iš naujo!" msgid "System presets" -msgstr "Preset di sistema" +msgstr "Sistemos išankstiniai nustatymai" msgid "User presets" -msgstr "Preset utente" +msgstr "Naudotojo išankstiniai nustatymai" msgid "Incompatible presets" -msgstr "Preset incompatibili" +msgstr "Nesuderinami išankstiniai nustatymai" + +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" msgid "AMS filaments" -msgstr "Filamento AMS" +msgstr "AMS gijos" -msgid "Click to pick filament color" -msgstr "Fai click per selezionare il colore del filamento" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Si prega di scegliere il colore del filamento" +msgid "Click to select filament color" +msgstr "Paspauskite gijos spalvos pasirinkimui" msgid "Add/Remove presets" -msgstr "Aggiungi/Rimuovi preset" +msgstr "Pridėti / pašalinti išankstinius nustatymus" msgid "Edit preset" -msgstr "Modifica preset" +msgstr "Redaguoti išankstinį nustatymą" msgid "Project-inside presets" -msgstr "Preset interno al progetto" +msgstr "Projekto vidiniai nustatymai" + +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" msgid "Add/Remove filaments" -msgstr "Aggiungi/rimuovi filamento" +msgstr "Pridėti / pašalinkite gijas" msgid "Add/Remove materials" -msgstr "Aggiungi/rimuovi materiali" +msgstr "Pridėti / pašalinti medžiagas" -msgid "Select/Remove printers(system presets)" -msgstr "Seleziona/Rimuovi stampanti (preimpostazioni di sistema)" +msgid "Select/Remove printers (system presets)" +msgstr "Pasirinkti / Pašalinti spausdintuvus (sistemos nustatymai)" msgid "Create printer" -msgstr "Creare una stampante" +msgstr "Sukurti spausdintuvą" + +msgid "Empty" +msgstr "Tuščias" + +msgid "Incompatible" +msgstr "Nesuderinama" msgid "The selected preset is null!" -msgstr "Il preset selezionato è nullo!" +msgstr "Pasirinktas šablonas yra tuščias!" msgid "End" -msgstr "End" +msgstr "Pabaiga" msgid "Customize" -msgstr "Personalizza" +msgstr "Pritaikyti" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "Kita sluoksnio gijos seka" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "Prašome įvesti sluoksnių skaičių (>=2)." msgid "Plate name" -msgstr "Nome Piatto" - -msgid "Same as Global Print Sequence" -msgstr "Uguale a Sequenza stampa globale" - -msgid "Print sequence" -msgstr "Sequenza di stampa" - -msgid "Same as Global" -msgstr "Same as Global" - -msgid "Disable" -msgstr "Disable" - -msgid "Spiral vase" -msgstr "Vaso a spirale" - -msgid "First layer filament sequence" -msgstr "Sequenza di filamenti di primo Layer" +msgstr "Plokštės pavadinimas" msgid "Same as Global Plate Type" -msgstr "Uguale al tipo di piano globale" +msgstr "Toks pats, kaip ir bendras plokštės tipas" + +msgid "Bed type" +msgstr "Pagrindo tipas" + +msgid "Same as Global Print Sequence" +msgstr "Tokia pati, kaip ir bendra spausdinimo eiga" + +msgid "Print sequence" +msgstr "Spausdinimo eiga" + +msgid "Same as Global" +msgstr "Kaip ir bendra" + +msgid "Disable" +msgstr "Išjungti" + +msgid "Spiral vase" +msgstr "Spiralinė vaza" + +msgid "First layer filament sequence" +msgstr "Pirmojo sluoksnio gijos eiga" msgid "Same as Global Bed Type" -msgstr "Uguale al tipo di piano globale" +msgstr "Toks pats, kaip ir bendras pagrindo tipas" msgid "By Layer" -msgstr "Per layer" +msgstr "Pagal sluoksnį" msgid "By Object" -msgstr "Per oggetto" +msgstr "Pagal objektą" msgid "Accept" -msgstr "Accetta" +msgstr "Priimti" msgid "Log Out" -msgstr "Log Out" +msgstr "Atsijungti" msgid "Slice all plate to obtain time and filament estimation" -msgstr "Slice di tutti i piatti per ottenere una stima del tempo e filamento" +msgstr "Laiko ir gijos sąnaudoms sužinoti susluoksniuokite visą plokštę" -msgid "Packing project data into 3mf file" -msgstr "Packing dati progetto in 3mf file" +msgid "Packing project data into 3MF file" +msgstr "Projekto duomenys pakuojami į .3mf failą" -msgid "Uploading 3mf" -msgstr "Caricamento 3mf" +msgid "Uploading 3MF" +msgstr "Įkeliamas 3mf" msgid "Jump to model publish web page" -msgstr "Vai alla pagina web di pubblicazione del modello" +msgstr "Pereiti į modelio talpinimo interneto puslapį" -msgid "Note: The preparation may takes several minutes. Please be patiant." -msgstr "" -"Nota: la preparazione può richiedere alcuni minuti. Si prega di avere " -"pazienza." +msgid "Note: The preparation may take several minutes. Please be patient." +msgstr "Pastaba: paruošimas gali užtrukti kelias minutes. Būkite kantrūs." msgid "Publish" -msgstr "Pubblica" +msgstr "Talpinti" -msgid "Publish was cancelled" -msgstr "La pubblicazione è stata annullata" +msgid "Publish was canceled" +msgstr "Publikavimas buvo atšauktas" msgid "Slicing Plate 1" -msgstr "Slicing Piatto 1" +msgstr "Sluoksniuojama plokštė 1" -msgid "Packing data to 3mf" -msgstr "Packing data to 3mf" +msgid "Packing data to 3MF" +msgstr "Duomenys pakuojami į 3mf" msgid "Jump to webpage" -msgstr "Vai alla pagina web" +msgstr "Pereiti į interneto puslapį" #, c-format, boost-format msgid "Save %s as" -msgstr "Salva %s come" +msgstr "Išsaugoti %s kaip" msgid "User Preset" -msgstr "Preset utente" +msgstr "Naudotojo nustatymai" msgid "Preset Inside Project" -msgstr "Preset interno al Progetto" +msgstr "Nustatymai projekto viduje" msgid "Name is unavailable." -msgstr "Nome non disponibile." +msgstr "Nėra pavadinimo." -msgid "Overwrite a system profile is not allowed" -msgstr "Non è consentito sovrascrivere un profilo di sistema" +msgid "Overwriting a system profile is not allowed." +msgstr "Sistemos profilio perrašyti neleidžiama." #, boost-format msgid "Preset \"%1%\" already exists." -msgstr "Preset \"%1%\" esiste già." +msgstr "Nustatymai \"%1%\" jau yra." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" -"Preset \"%1%\" esiste già ma è incompatibile con la stampante corrente." +"Nustatymai \"%1%\" jau yra, tačiau jie nesuderinami su dabartiniu " +"spausdintuvu." -msgid "Please note that saving action will replace this preset" -msgstr "Tieni presente che il salvataggio sovrascriverà il preset corrente" +msgid "Please note that saving will overwrite this preset." +msgstr "" +"Atkreipkite dėmesį, kad išsaugojus bus perrašytas dabartinis išankstinis " +"nustatymas." msgid "The name cannot be the same as a preset alias name." -msgstr "Il nome non può essere uguale a quello di un preset." +msgstr "Pavadinimas negali būti toks pat kaip iš anksto nustatytasis." msgid "Save preset" -msgstr "Salva preset" +msgstr "Išsaugoti išankstinį nustatymą" msgctxt "PresetName" msgid "Copy" -msgstr "Copia" +msgstr "Kopijuoti" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "La stampante \"%1%\" è selezionata con il preset \"%2%\"" +msgstr "Spausdintuvas \"%1%\" pasirinktas su nustatymais \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Scegli un'azione con \"%1%\" preimpostata dopo il salvataggio." +msgstr "Prašome pasirinkti veiksmą su \"%1%\" nustatymais po išsaugojimo." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "Per \"%1%\", cambia \"%2%\" con \"%3%\". " +msgstr "\"%1%\", keičiamas \"%2%\" į \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "Per \"%1%\", aggiungere \"%2%\" come nuovo preset" +msgstr "\"%1%\", pridedama \"%2%\" kaip nauji nustatymai" #, boost-format msgid "Simply switch to \"%1%\"" -msgstr "Basta passare a \"%1%\"" +msgstr "Paprasčiausiai persijunkite į \"%1%\"" msgid "Task canceled" -msgstr "Attività annullata" - -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Cerca" - -msgid "My Device" -msgstr "Mio dispositivo" - -msgid "Other Device" -msgstr "Altro dispositivo" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Inserisci codice di accesso" - -msgid "Can't find my devices?" -msgstr "Non riesci a trovare i dispositivi?" - -msgid "Log out successful." -msgstr "Log out riuscito." - -msgid "Busy" -msgstr "Occupato" +msgstr "Užduotis atšaukta" msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate" +msgstr "Bambu Cool plokštė" msgid "PLA Plate" -msgstr "Piastra PLA" +msgstr "PLA plokštė" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "Bambu inžinerinė plokštė" msgid "Bambu Smooth PEI Plate" -msgstr "Piastra Bambu Smooth PEI" +msgstr "Bambu smulkaus PEI plokštė" msgid "High temperature Plate" -msgstr "High Temperature Plate" +msgstr "Aukštos temperatūros plokštė" msgid "Bambu Textured PEI Plate" -msgstr "Piastra PEI testurizzata Bambu" +msgstr "Bambu stabaus PEI plokštė" -msgid "Send print job to" -msgstr "Invia stampa a" - -msgid "Flow Dynamics Calibration" -msgstr "Calibrazione della dinamica del flusso" - -msgid "Click here if you can't connect to the printer" -msgstr "Clicca qui se non puoi connetterti alla stampante" - -msgid "send completed" -msgstr "Invio completo" - -msgid "Error code" -msgstr "Codice di errore" - -msgid "No login account, only printers in LAN mode are displayed" +msgid "Bambu Cool Plate SuperTack" msgstr "" -"Nessun account di login, vengono visualizzate solo le stampanti in modalità " -"LAN" -msgid "Connecting to server" -msgstr "Connessione in corso al server" - -msgid "Synchronizing device information" -msgstr "Sincronizzazione informazioni dispositivo" - -msgid "Synchronizing device information time out" -msgstr "La sincronizzazione informazioni dispositivo è scaduta" - -msgid "Cannot send the print job when the printer is updating firmware" +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" msgstr "" -"Impossibile inviare un lavoro di stampa mentre la stampante sta aggiornando " -"il firmware" msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "La stampante sta eseguendo le istruzioni. Riavvia la stampa al termine" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" -msgid "The printer is busy on other print job" -msgstr "La stampante è occupata con altro lavoro di stampa" +msgid "Flow Dynamics Calibration" +msgstr "Gijos srauto kalibravimas" + +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" + +msgid "send completed" +msgstr "siuntimas baigtas" + +msgid "Error code" +msgstr "Klaidos kodas" + +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Il filamento %s supera il numero di slot AMS. Aggiorna il firmware della " -"stampante per supportare l'assegnazione degli slot AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Il filamento supera il numero di slot AMS. Aggiorna il firmware della " -"stampante per supportare l'assegnazione degli slot AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Fai clic su ciascun filamento in alto per specificare lo slot AMS di " -"mappatura prima di inviare il lavoro di stampa" #, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" -"Il filamento %s non corrisponde al filamento nello slot AMS %s. Aggiorna il " -"firmware della stampante per supportare l'assegnazione degli slot AMS." +"Naudojama gija %s nesutampa su gija AMS lizde %s. Atnaujinkite spausdintuvo " +"programinę įrangą, kad galėtumėte priskirti lizdus AMS." msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" -"Il filamento non corrisponde al filamento nello slot AMS. Aggiorna il " -"firmware della stampante per supportare l'assegnazione degli slot AMS." - -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Il firmware della stampante supporta solo la mappatura sequenziale del " -"filamento => slot AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "È necessario inserire una scheda microSD prima di stampare." +"Naudojama gija nesutampa su gija AMS lizde. Atnaujinkite spausdintuvo " +"programinę įrangą, kad galėtumėte priskirti lizdus AMS." #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "È necessario inserire una scheda microSD per registrare un timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Impossibile inviare il lavoro di stampa a una stampante il cui firmware deve " -"essere aggiornato." - -msgid "Cannot send the print job for empty plate" -msgstr "Impossibile inviare il lavoro di stampa per un piatto vuoto" - -msgid "This printer does not support printing all plates" -msgstr "Questa stampante non supporta la stampa di piatti multipla" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"Quando si abilita la modalità vaso a spirale, le macchine con struttura I3 " -"non genereranno video timelapse." +"Įjungus spiralės vazos režimą, I3 struktūros spausdintuvai negeneruos " +"pakadrinių vaizdo įrašų." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse non è supportato perché la sequenza di stampa è impostata su \"Per " -"oggetto\"." msgid "Errors" -msgstr "Errori" - -msgid "Please check the following:" -msgstr "Controllare quanto segue:" +msgstr "Klaidos" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" + +msgid "" +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"Il tipo di stampante selezionato durante la generazione del G-Code non è " -"coerente con la stampante attualmente selezionata. Si consiglia di " -"utilizzare lo stesso tipo di stampante per lo slicing." +"G-kodo generavimo metu pasirinktas spausdintuvo tipas neatitinka šiuo metu " +"pasirinkto spausdintuvo. Rekomenduojame sluoksniavimui naudoti tą patį " +"spausdintuvo tipą." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " "they are the required filaments. If they are okay, press \"Confirm\" to " "start printing." msgstr "" -"Ci sono alcuni filamenti sconosciuti nelle mappature AMS. Si prega di " -"verificare se sono i filamenti necessari. Se sono a posto, fai clic su " -"«Conferma» per iniziare a stampare." +"AMS sistemoje yra nežinomų gijų. Prašome patikrinti, ar tai yra reikalingos " +"gijos. Jei viskas tvarkoje, spausdinimą galite pradėti paspaudę " +"„Patvirtinti“." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "Ugello in preset: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "ugello memorizzato: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" +msgstr "Prašome patikrinti:" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" +"Prašome ištaisyti aukščiau pateiktą klaidą, priešingu atveju nebus galima " +"pradėti spausdinimo." msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Fai clic sul pulsante di conferma se desideri continuare con la stampa." +"Jei jūs vis dar norite tęsti spausdinimą, paspauskite patvirtinimo mygtuką." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Collegamento alla stampante. Impossibile annullare durante il processo di " -"connessione." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Precauzioni per l'uso! La calibrazione del flusso sulla piastra PEI " -"testurizzata può fallire a causa della superficie irregolare." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Calibrazione automatica del flusso tramite Micro Lidar" +msgid "Preparing print job" +msgstr "Spausdinimo užduoties rengimas" -msgid "Modifying the device name" -msgstr "Modifica nome del dispositivo" +msgid "The name length exceeds the limit." +msgstr "Pavadinimas viršijo leistiną dydį." -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Invia a microSD stampante" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Jei negalite prijungti spausdintuvo, spauskite čia" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Nėra prisijungimo paskyros, rodomi tik vietiniame tinkle esantys " +"spausdintuvai" + +msgid "Connecting to server..." +msgstr "Jungiamasi prie serverio" + +msgid "Synchronizing device information..." +msgstr "Sinchronizuojama įrenginio informacija" + +msgid "Synchronizing device information timed out." +msgstr "Baigėsi įrenginio informacijos sinchronizavimo laikas" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Spausdinimo užduoties negalima išsiųsti, kai spausdintuvo programinė įranga " +"atnaujinama" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Spausdintuvas vykdo instrukcijas. Kai jis baigs, prašome paleisti " +"spausdinimą iš naujo" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Neįmanoma išsiųsti spausdinimo užduoties spausdintuvui, kurio programinę " +"įrangą reikia atnaujinti." + +msgid "Cannot send a print job for an empty plate." +msgstr "Negalima siųsti spausdinimo užduoties tuščiai plokštei" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Spausdintuvas nepalaiko visų plokščių spausdinimo" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" -"Impossibile inviare attività di stampa quando è in corso un aggiornamento" +"Negalima nusiųsti spausdinimo užduočių programinės įrangos atnaujinimo metu" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" -"La stampante selezionata è incompatibile con i preset della stampante scelti." +"Pasirinktas spausdintuvas nesuderinamas su išrinktais spausdintuvų " +"nustatymais." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"È necessario inserire una scheda MicroSD prima di inviare alla scheda SD " -"della stampante." msgid "The printer is required to be in the same LAN as Snapmaker Orca." -msgstr "La stampante deve essere sulla stessa LAN di Snapmaker Orca." +msgstr "Spausdintuvas privalo būti tame pačiame tinkle kaip ir Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "La stampante non supporta l'invio alla scheda microSD della stampante." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." -msgstr "Slice completo." +msgstr "Sluoksniavimas baigtas." msgid "View all Daily tips" -msgstr "Visualizza tutti i consigli giornalieri" +msgstr "Peržiūrėti visus dienos patarimus" msgid "Failed to create socket" -msgstr "Impossibile creare il socket" +msgstr "Nepavyko sukurti soketo" msgid "Failed to connect socket" -msgstr "Connessione del socket non riuscita" +msgstr "Nepavyko prisijungti prie soketo" msgid "Failed to publish login request" -msgstr "Non è stato possibile pubblicare la richiesta di login" +msgstr "Nepavyko paskelbti prisijungimo užklausos" msgid "Get ticket from device timeout" -msgstr "Timeout durante il recupero del Ticket dal dispositivo" +msgstr "Įrenginio bilieto laukimo laikas baigėsi" msgid "Get ticket from server timeout" -msgstr "Timeout durante il recupero del Ticket dal server" +msgstr "Serverio bilieto laukimo laikas baigėsi" msgid "Failed to post ticket to server" -msgstr "Inserimento del ticket sul server non riuscito" +msgstr "Nepavyko paskelbti bilieto serveryje" msgid "Failed to parse login report reason" -msgstr "Non è stato possibile analizzare la causa del rapporto di login" +msgstr "Nepavyko išanalizuoti prisijungimo ataskaitos priežasties" msgid "Receive login report timeout" -msgstr "Timeout ricezione del rapporto di login" +msgstr "Prisijungimo ataskaitos gavimo laikas baigėsi" msgid "Unknown Failure" -msgstr "Fallimento sconosciuto" +msgstr "Nežinomas gedimas" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." +"Prašome rasti PIN kodą spausdintuvo ekrano paskyros puslapyje\n" +"ir įveskite jį žemiau esančiame PIN kodo lauke." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "Nerandate PIN kodo?" msgid "Pin Code" -msgstr "Pin Code" +msgstr "PIN kodas" msgid "Binding..." -msgstr "Binding..." +msgstr "Siejama..." msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "Prašome patvirtinti spausdintuvo ekrane" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "Prisijungti nepavyko. Prašome patikrinti PIN kodą." msgid "Log in printer" -msgstr "Log in stampante" +msgstr "Prijungti spausdintuvą" -msgid "Would you like to log in this printer with current account?" -msgstr "Vuoi accedere alla stampante con l'account corrente?" +msgid "Would you like to log in to this printer with the current account?" +msgstr "Ar norite prisijungti prie šio spausdintuvo su šia paskyra?" msgid "Check the reason" -msgstr "Verifica la causa" +msgstr "Patikrinti priežastį" msgid "Read and accept" -msgstr "Leggi e accetta" +msgstr "Perskaičiau ir sutinku" msgid "Terms and Conditions" -msgstr "Termini e condizioni" +msgstr "Naudojimo sąlygos" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" -"Grazie per aver acquistato un dispositivo Bambu Lab. Prima di utilizzare il " -"dispositivo Bambu Lab, si prega di leggere i termini e le condizioni. " -"Facendo clic per accettare di utilizzare il tuo dispositivo Bambu Lab, " -"accetti di rispettare l'Informativa sulla privacy e le Condizioni d'uso " -"(collettivamente, i \"Termini\"). Se non rispetti o non accetti " -"l'Informativa sulla privacy di Bambu Lab, ti preghiamo di non utilizzare i " -"dispositivi e i servizi di Bambu Lab." +"Dėkojame, kad įsigijote „Bambu Lab“ prietaisą. Prieš naudodamiesi „Bambu " +"Lab“ prietaisu, perskaitykite taisykles ir sąlygas. Paspaudę sutikti naudoti " +"„Bambu Lab“ įrenginį, sutinkate laikytis privatumo politikos ir naudojimo " +"sąlygų (toliau kartu - sąlygos). Jei nesilaikote „Bambu Lab“ privatumo " +"politikos arba nesutinkate su ja, nesinaudokite „Bambu Lab“ įranga ir " +"paslaugomis." msgid "and" -msgstr "e" +msgstr "ir" msgid "Privacy Policy" -msgstr "Informativa Privacy" +msgstr "Privatumo politika" msgid "We ask for your help to improve everyone's printer" -msgstr "Chiediamo il tuo aiuto per migliorare tutte le stampanti" +msgstr "Mes prašome jūsų pagalbos tobulinant kiekvieno spausdintuvą" msgid "Statement about User Experience Improvement Program" -msgstr "Dichiarazione del programma miglioramento dell'esperienza utente" +msgstr "Informacija apie vartotojo patirties tobulinimo programą" #, c-format, boost-format msgid "" @@ -7515,178 +8803,203 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"Nella comunità della stampa 3D, impariamo dai successi e dagli insuccessi " -"degli altri per adattare i nostri parametri e impostazioni di slicing. %s " -"segue lo stesso principio e utilizza l'apprendimento automatico per " -"migliorare le sue prestazioni basandosi sui successi e sugli insuccessi di " -"un vasto numero di stampe effettuate dai nostri utenti. Stiamo addestrando " -"%s affinché diventi più intelligente alimentandolo con dati reali. Se sei " -"d'accordo, questo servizio accederà alle informazioni dai tuoi registri " -"degli errori e dai registri di utilizzo, che possono includere informazioni " -"descritte nell'Informativa sulla privacy. Non raccoglieremo alcun Dato " -"Personale con il quale un individuo possa essere identificato direttamente o " -"indirettamente, incluso, a titolo esemplificativo, nomi, indirizzi, " -"informazioni di pagamento o numeri di telefono. Abilitando questo servizio, " -"accetti questi termini e la dichiarazione sull'Informativa sulla privacy." +"3D spausdinimo bendruomenėje mokomės vieni iš kitų sėkmių ir nesėkmių, kad " +"galėtume koreguoti savo sluoksniavimo parametrus ir nustatymus. %s veikia " +"tuo pačiu principu ir naudoja mašininį mokymąsi, kad pagerintų savo veikimą " +"remdamasi didžiule mūsų vartotojų spausdinimo sėkmėmis ir nesėkmėmis. Mes " +"mokome %s tapti protingesniu įrankiu, pateikdami jam realaus pasaulio " +"duomenis. Jei sutinkate, ši paslauga pasieks informaciją iš jūsų klaidų ir " +"naudojimo žurnalų, kurie gali apimti informaciją, aprašytą Privatumo " +"politikoje. Mes nerenkame jokių asmens duomenų, kuriais galima tiesiogiai ar " +"netiesiogiai identifikuoti asmenį, įskaitant, bet neapsiribojant, vardus, " +"pavardes, adresus, mokėjimo informacija ar telefono numerius. Įgalindami šią " +"paslaugą, jūs sutinkate su šiomis sąlygomis ir Privatumo politikos " +"nuostatais." msgid "Statement on User Experience Improvement Plan" -msgstr "Dichiarazione del piano miglioramento dell'esperienza utente" +msgstr "Informacija apie vartotojo patirties tobulinimo planą" msgid "Log in successful." -msgstr "Log in effettuato con successo." +msgstr "Prisijungta sėkmingai." msgid "Log out printer" -msgstr "Log out dalla stampante" +msgstr "Atjungti spausdintuvą" msgid "Would you like to log out the printer?" -msgstr "Vuoi disconnettere la stampante?" +msgstr "Ar norite atjungti spausdintuvą?" msgid "Please log in first." -msgstr "Prima effettua il login." +msgstr "Prašome pirmiau prisijungti." msgid "There was a problem connecting to the printer. Please try again." -msgstr "Si è verificato un problema di connessione alla stampante. Riprovare." +msgstr "Nepavyko prijungti spausdintuvo. Prašome pabandyti vėliau." msgid "Failed to log out." -msgstr "Disconnessione non riuscita." +msgstr "Nepavyko atsijungti." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" -msgstr "Salva le %s attuali" +msgstr "Išsaugoti dabartinį %s" msgid "Delete this preset" -msgstr "Elimina questo preset" +msgstr "Ištrinti šį išankstinį nustatymą" msgid "Search in preset" -msgstr "Cerca nel preset" +msgstr "Ieškoti nustatymuose" msgid "Click to reset all settings to the last saved preset." msgstr "" -"Clicca per ripristinare tutte le impostazioni dell'ultimo preset salvato." +"Paspauskite, norėdami atkurti visus nustatymus pagal paskutinį išsaugotą " +"profilį." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"È necessaria una Prime Tower per la modalità timeplase fluida. Potrebbero " -"esserci difetti sul modello senza una Prime Tower. Sei sicuro di voler " -"disabilitare la Prime Tower?" +"Norint sklandžiai filmuoti laiko intervalais, reikia valymo bokšto. Be " +"valymo bokšto modelyje gali būti trūkumų. Ar tikrai norite išjungti valymo " +"bokštą?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Įjungus tikslaus Z aukščio ir pagrindinio bokšto funkcijas, pagrindinio " +"bokšto dydis gali padidėti. Ar vis tiek norite įjungti?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"È necessaria una Prime Tower per una modalità timelapse fluida. Potrebbero " -"esserci dei difetti sul modello senza Prime Tower. Vuoi abilitare la Prime " -"Tower?" +"Pakadriniam tolygiam video reikia Prime bokšto. Spausdinant be Prime " +"bokštelio modelis gali turėti trūkumų. Ar tikrai norite išjungti Prime " +"bokštą?" msgid "Still print by object?" -msgstr "Stampare ancora per oggetto?" +msgstr "Vis dar spausdinti pagal objektą?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Abbiamo aggiunto uno stile sperimentale \"Albero Slim\" che presenta un " -"volume di supporto più piccolo ma una resistenza più debole.\n" -"Si consiglia di utilizzarlo con: 0 layer interfaccia, 0 distanza dall'alto, " -"2 pareti." msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Naudojant atraminę medžiagą atraminei sąsajai, rekomenduojame šiuos " +"nustatymus:\n" +"0 viršutinis Z atstumas, 0 sąsajos tarpas, susipynęs tiesinis modelis ir " +"išjungtas nepriklausomas atraminio sluoksnio aukštis." + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Modificare queste impostazioni automaticamente? \n" -"Si - Modifica queste impostazioni automaticamente.\n" -"No - Non modificare queste impostatzioni per me" +"Automatiškai pakeisti šiuos nustatymus?\n" +"Taip - Pakeiskite šiuos nustatymus automatiškai.\n" +"Ne - Nekeiskite šių nustatymų už mane" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Per gli stili \"Albero Strong\" e \"Albero ibrido\", si consigliano le " -"seguenti impostazioni: almeno 2 layer interfaccia, distanza z superiore di " -"almeno 0,1 mm o utilizzo di materiali di supporto sull'interfaccia." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Quando si utilizza il materiale di supporto per l'interfaccia di supporto, " -"si consigliano le seguenti impostazioni:\n" -"0 distanza z superiore , 0 spaziatura interfaccia, trama concentrico e " -"disabilita altezza layer di supporto indipendente" msgid "" "Enabling this option will modify the model's shape. If your print requires " "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" -"L'attivazione di questa opzione modificherà la forma del modello. Se la " -"stampa richiede dimensioni precise o fa parte di un assieme, è importante " -"ricontrollare se questa modifica della geometria influisce sulla " -"funzionalità della stampa." +"Įjungus šią parinktį, pasikeis modelio forma. Jei jūsų spaudinys turi " +"atitikti tikslius matmenis arba yra dalis didesnio mazgo, svarbu papildomai " +"patikrinti, ar šis geometrijos pasikeitimas neturi įtakos jūsų spaudinio " +"funkcionalumui." msgid "Are you sure you want to enable this option?" -msgstr "Sei sicuro di voler abilitare questa opzione?" +msgstr "Ar norite įjungti šią galimybę?" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Užpildymo modeliai paprastai yra suprojektuoti taip, kad automatiškai " +"tvarkytų sukimąsi, siekiant užtikrinti tinkamą spausdinimą ir pasiekti " +"numatytus efektus (pvz., Gyroid, Cubic). Sukant esamą retą užpildymo modelį, " +"gali atsirasti nepakankamas atraminis paviršius. Prašome elgtis atsargiai ir " +"atidžiai patikrinti, ar nėra galimų spausdinimo problemų. Ar tikrai norite " +"įjungti šią parinktį?" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" -"L'altezza dello strato è troppo piccola.\n" -"Sarà impostato su min_layer_height\n" +"Per mažas sluoksnio aukštis.\n" +"Jis bus nustatytas į min_layer_height\n" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" -"L'altezza dello strato supera il limite in Impostazioni stampante -> " -"Estrusore -> Limiti di altezza dello strato, ciò potrebbe causare problemi " -"di qualità di stampa." +"Sluoksnio aukštis netilpo į ribas Spausdintuvo nustatymai -> Ekstruderis -> " +"Sluoksnio aukščio ribos, tai gali turėti įtakos spausdinio kokybei.." -msgid "Adjust to the set range automatically? \n" -msgstr "Regolare automaticamente l'intervallo impostato? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Nustatyti ribų priskyrimą automatiškai?\n" msgid "Adjust" -msgstr "Rettifica" +msgstr "Sureguliuoti" msgid "Ignore" -msgstr "Ignora" +msgstr "Nekreipti dėmesio" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" +"Eksperimentinė funkcija: Gijos įtraukimas ir nukirpimas didesniu atstumu " +"keičiant giją, siekiant sumažinti išspaudžiamos liekanos kiekį. Ši funkcija " +"gali ženkliai sumažinti išspaudžiamos liekanos kiekį, tačiau taip pat gali " +"padidėti ekstruderio užsikimšimo ar kitų spausdinimo problemų tikimybė." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" +"Eksperimentinė funkcija: Gijos įtraukimas ir nukirpimas didesniu atstumu " +"keičiant giją, siekiant sumažinti išspaudžiamos liekanos kiekį.\n" +"Ši funkcija gali ženkliai sumažinti išspaudžiamos ankstesnės spalvos gijos " +"liekanos kiekį, tačiau taip pat gali padidėti ekstruderio užsikimšimo ar " +"kitų spausdinimo problemų tikimybė." msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7694,101 +9007,194 @@ msgid "" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"Quando si registra un timelapse senza testa di stampa, si consiglia di " -"aggiungere un \"Timelapse Torre di pulizia\"\n" -"facendo clic con il pulsante destro del mouse sulla posizione vuota del " -"piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia\"»." +"Įrašant pakadrinį vaizdo įrašą be spausdinimo galvutės judesių, " +"rekomenduojama naudoti „Pakadrinio valymo bokštą“.\n" +"Norėdami jį pridėti, dešiniuoju pelės mygtuku spustelėkite tuščią " +"spausdinimo plokštės vietą.\n" +"Tada pasirinkite „Pridėti primityvą“ -> „pakadrinis valymo bokštas“." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Bus sukurta dabartinės sistemos išankstinės nuostatos kopija, kuri bus " +"atskirta nuo sistemos išankstinės nuostatos." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Dabartinis pasirinktinis išankstinis nustatymas bus atskirtas nuo " +"pagrindinio sistemos išankstinio nustatymo." + +msgid "Modifications to the current profile will be saved." +msgstr "Dabartinio profilio pakeitimai bus išsaugoti." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Šis veiksmas yra negrįžtamas.\n" +"Ar norite tęsti?" + +msgid "Detach preset" +msgstr "Atjungti išankstinį nustatymą" + +msgid "This is a default preset." +msgstr "Tai numatytasis išankstinis nustatymas." + +msgid "This is a system preset." +msgstr "Tai iš anksto nustatytas sistemos nustatymas." + +msgid "Current preset is inherited from the default preset." +msgstr "" +"Dabartinis išankstinis nustatymas paveldėtas iš numatytojo išankstinio " +"nustatymo." + +msgid "Current preset is inherited from" +msgstr "Dabartinis išankstinis nustatymas paveldėtas iš" + +msgid "It can't be deleted or modified." +msgstr "Jo negalima ištrinti ar keisti." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Bet kokius pakeitimus reikėtų išsaugoti kaip naują iš anksto nustatytą " +"nustatymą, paveldėtą iš šio." + +msgid "To do that please specify a new name for the preset." +msgstr "" +"Norėdami tai padaryti, nurodykite naują išankstinio nustatymo pavadinimą." + +msgid "Additional information:" +msgstr "Papildoma informacija:" + +msgid "vendor" +msgstr "gamintojas" + +msgid "printer model" +msgstr "spausdintuvo modelis" + +msgid "default print profile" +msgstr "numatytasis spausdinimo profilis" + +msgid "default filament profile" +msgstr "numatytasis gijų profilis" + +msgid "default SLA material profile" +msgstr "numatytasis SLA medžiagos profilis" + +msgid "default SLA print profile" +msgstr "numatytasis SLA spausdinimo profilis" + +msgid "full profile name" +msgstr "pilnas profilio pavadinimas" + +msgid "symbolic profile name" +msgstr "simbolinis profilio pavadinimas" msgid "Line width" -msgstr "Larghezza linea" +msgstr "Linijos plotis" msgid "Seam" -msgstr "Cucitura" +msgstr "Siūlė" msgid "Precision" -msgstr "Precisione" +msgstr "Tikslumas" msgid "Wall generator" -msgstr "Generatore parete" +msgstr "Sienų generatorius" msgid "Walls and surfaces" -msgstr "Pareti e superfici" +msgstr "Sienos ir paviršiai" msgid "Bridging" -msgstr "Bridging" +msgstr "Tiltai" msgid "Overhangs" -msgstr "Sporgenze" +msgstr "Iškyšos" msgid "Walls" -msgstr "Pareti" +msgstr "Sienos" msgid "Top/bottom shells" -msgstr "Gusci superiori/inferiori" +msgstr "Viršutiniai/apatiniai paviršiai" msgid "Initial layer speed" -msgstr "Velocità primo layer" +msgstr "Pradinio sluoksnio greitis" msgid "Other layers speed" -msgstr "Velocità altri layer" +msgstr "Kitų sluoksnių greitis" msgid "Overhang speed" -msgstr "Velocità di sbalzo" +msgstr "Iškyšų greitis" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"Indica la velocità per vari gradi di sporgenza. I gradi di sporgenza sono " -"espressi come percentuale della larghezza della linea. Velocità 0 significa " -"che non c'è rallentamento per l'intervallo di gradi di sporgenza e viene " -"utilizzata la velocità della parete." +"Šiame nustatyme nurodomas spausdinimo greitis skirtingiems iškyšos " +"laipsniams. Iškyšos laipsnis pateikiamas linijos pločio procentine išraiška. " +"0 greitis reiškia, kad nepristabdoma nė vienam iškyšos laipsniui ir " +"naudojamas sienelės spausdinimo greitis" msgid "Bridge" -msgstr "Ponte" +msgstr "Tiltas" msgid "Set speed for external and internal bridges" -msgstr "Impostare la velocità per ponti esterni e interni" +msgstr "Vidinių ir išorinių tiltų greitis" msgid "Travel speed" -msgstr "Velocità spostamento" +msgstr "Judėjimo greitis" msgid "Acceleration" -msgstr "Accelerazione" +msgstr "Pagreitis" msgid "Jerk(XY)" -msgstr "Jerk(XY)" +msgstr "Pagreitis (XY)" msgid "Raft" -msgstr "Raft" +msgstr "Platforma" msgid "Support filament" -msgstr "Filamento per supporti" +msgstr "Atramų gija" + +msgid "Support ironing" +msgstr "Atramų lyginimas" msgid "Tree supports" -msgstr "Supporti ad albero" +msgstr "Medžio tipo atramos" -msgid "Skirt" -msgstr "Skirt" +msgid "Multimaterial" +msgstr "Kelios medžiagos" msgid "Prime tower" -msgstr "Prime tower" +msgstr "Valymo bokštas" + +msgid "Filament for Features" +msgstr "Gija funkcijoms" + +msgid "Ooze prevention" +msgstr "Ištekėjimo prevencija" + +msgid "Skirt" +msgstr "Apvadas" msgid "Special mode" -msgstr "Modalità speciale" +msgstr "Specialus režimas" msgid "G-code output" -msgstr "Uscita G-code" +msgstr "G-kodo išvestis" msgid "Post-processing Scripts" -msgstr "Script post-elaborazione" +msgstr "Scenarijai po apdorojimo" msgid "Notes" -msgstr "Note" +msgstr "Pastabos" msgid "Frequent" -msgstr "Frequente" +msgstr "Dažnai" #, c-format, boost-format msgid "" @@ -7800,110 +9206,123 @@ msgid_plural "" "Please remove them, or will beat G-code visualization and printing time " "estimation." msgstr[0] "" -"La riga seguente %s contiene parole chiave riservata.\n" -"Rimuovilo, altrimenti la visualizzazione G-code e la stima del tempo di " -"stampa verranno interrotte." +"Tolesnėje eilutėje %s yra rezervuotų raktinių žodžių.\n" +"Pašalinkite juos, nes kitaip bus pažeistas G kodo vizualizavimas ir " +"spausdinimo laiko įvertinimas." msgstr[1] "" -"Following lines %s contain reserved keywords.\n" -"Please remove them, or G-code visualization and print time estimation will " -"be broken." +"Tolesnėse eilutėse %s yra rezervuotų raktinių žodžių.\n" +"Pašalinkite juos, nes kitaip bus pažeistas G kodo vizualizavimas ir " +"spausdinimo laiko įvertinimas." +msgstr[2] "" +"Tolesnėse eilutėse %s yra rezervuotų raktinių žodžių.\n" +"Pašalinkite juos, nes kitaip bus pažeistas G kodo vizualizavimas ir " +"spausdinimo laiko įvertinimas." msgid "Reserved keywords found" -msgstr "Parole chiave riservate trovate" +msgstr "Rasti rezervuoti raktažodžiai" msgid "Setting Overrides" -msgstr "Sovrascrivi impostazioni" +msgstr "Apribojimų nustatymas" msgid "Retraction" -msgstr "Retrazione" +msgstr "Įtraukimas" msgid "Basic information" -msgstr "Informazioni di Base" +msgstr "Pagrindinė informacija" msgid "Recommended nozzle temperature" -msgstr "Temperatura nozzle consigliata" +msgstr "Rekomenduojama purkštuko temperatūra" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" -"Intervallo di temperatura del nozzle consigliato per questo filamento. 0 " -"significa non impostato" +"Rekomenduojamas šios gijos purkštuko temperatūros diapazonas. 0 reiškia, kad " +"nenustatyta" + +msgid "Flow ratio and Pressure Advance" +msgstr "Srauto santykis ir slėgis" msgid "Print chamber temperature" -msgstr "Temperatura della camera di stampa" +msgstr "Spausdinimo kameros temperatūra" msgid "Print temperature" -msgstr "Temperatura stampa" - -msgid "Nozzle" -msgstr "Ugello" +msgstr "Spausdinimo temperatūra" msgid "Nozzle temperature when printing" -msgstr "Temperatura del nozzle durante la stampa" +msgstr "Purkštuko temperatūra spausdinant" -msgid "Cool plate" -msgstr "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Šalta plokštė (SuperTack)" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Temperatura del piano quando è installato il piatto Cool Plate. Il valore 0 " -"significa che il filamento non supporta la stampa su piatto Cool Plate." +"Pagrindo temperatūra, kai įdiegtas „Cool Plate SuperTack“. Vertė 0 reiškia, " +"kad gija nepalaiko spausdinimo ant „Cool Plate SuperTack“." -msgid "Textured Cool plate" -msgstr "" +msgid "Cool Plate" +msgstr "Šalta plokštė" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" +"Pagrindo temperatūra, kai sumontuota šalta plokštė. Reikšmė 0 reiškia, kad " +"gija nepalaiko spausdinimo ant šaltos plokštės." -msgid "Engineering plate" -msgstr "Engineering plate" +msgid "Textured Cool Plate" +msgstr "Tekstūruota vėsi plokštė" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"Temperatura del piano quando è installato il piatto Engineering. Il valore 0 " -"significa che il filamento non supporta la stampa su piatto Engineering." +"Pagrindo temperatūra, kai sumontuota šalta plokštė. Reikšmė 0 reiškia, kad " +"gija negalima spausdinti ant tekstūrinės šaltos plokštės." + +msgid "Engineering Plate" +msgstr "Inžinerinė plokštė" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "" +"Pagrindo temperatūra, kai sumontuota inžinerinė plokštė. Reikšmė 0 reiškia, " +"kad gija nepalaiko spausdinimo ant inžinerinės plokštės." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Piastra PEI liscia / piastra ad alta temperatura" +msgstr "Lygi PEI plokštė / aukštos temperatūros plokštė" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Temperatura del letto quando è installata la piastra PEI liscia/piastra ad " -"alta temperatura. Il valore 0 indica che il filamento non supporta la stampa " -"sulla piastra PEI liscia/piastra ad alta temperatura" +"Pagrindo temperatūra, kai įdiegta lygi PEI plokštė/aukštos temperatūros " +"plokštė. Vertė 0 reiškia, kad gija nepalaiko spausdinimo ant lygi PEI " +"plokštės/aukštos temperatūros plokštės." msgid "Textured PEI Plate" -msgstr "Textured PEI Plate" +msgstr "Tekstūruota PEI plokštė" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Temperatura del piano quando è installato il piatto Textured PEI. Il valore " -"0 significa che il filamento non è supportato sul piatto Textured PEI" +"Pagrindo temperatūra, kai sumontuota tekstūruota PEI plokštė. Reikšmė 0 " +"reiškia, kad gija nepalaiko spausdinimo ant tekstūruotos PEI plokštės." msgid "Volumetric speed limitation" -msgstr "Limitazione velocità volumetrica" - -msgid "Cooling" -msgstr "Raffreddamento" +msgstr "Tūrinio greičio ribojimas" msgid "Cooling for specific layer" -msgstr "Raffreddamento per specifico layer" +msgstr "Konkretaus sluoksnio aušinimas" msgid "Part cooling fan" -msgstr "Ventola di raffreddamento oggetto" +msgstr "Dalies aušinimo ventiliatorius" msgid "Min fan speed threshold" -msgstr "Soglia minima velocità della ventola" +msgstr "Min. ventiliatoriaus greičio riba" msgid "" "Part cooling fan speed will start to run at min speed when the estimated " @@ -7911,270 +9330,316 @@ msgid "" "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"La ventola di raffreddamento della parte funzionerà alla velocità minima " -"della ventola quando la durata stimata del layer è superiore al valore di " -"soglia. Quando il tempo del layer è inferiore alla soglia, la velocità della " -"ventola verrà interpolata tra la velocità minima e massima della ventola in " -"base al tempo di stampa a layer." +"Detalių aušinimo ventiliatorius veiks mažiausiu ventiliatoriaus greičiu, kai " +"numatoma sluoksnio trukmė bus ilgesnė už ribinę vertę. Kai sluoksnio trukmė " +"trumpesnė už ribinę vertę, ventiliatoriaus greitis bus apskaičiuojamas tarp " +"mažiausio ir didžiausio ventiliatoriaus greičio, atsižvelgiant į sluoksnio " +"spausdinimo trukmę" msgid "Max fan speed threshold" -msgstr "Soglia massima velocità della ventola" +msgstr "Maks ventiliatoriaus greičio riba" msgid "" "Part cooling fan speed will be max when the estimated layer time is shorter " "than the setting value" msgstr "" -"La ventola di raffreddamento funzionerà alla massima velocità quando il " -"tempo layer stimato è inferiore al valore di soglia." +"Detalių aušinimo ventiliatorius veiks didžiausiu greičiu, kai numatoma " +"sluoksnio trukmė bus trumpesnė už ribinę vertę" msgid "Auxiliary part cooling fan" -msgstr "Ventola di raffreddamento della parte ausiliaria" +msgstr "Pagalbinis dalies aušinimo ventiliatorius" msgid "Exhaust fan" -msgstr "Aspiratore" +msgstr "Ištraukimo ventiliatorius" msgid "During print" -msgstr "Durante la stampa" +msgstr "Spausdinant" msgid "Complete print" -msgstr "Stampa completa" +msgstr "Baigus spausdinti" msgid "Filament start G-code" -msgstr "G-code Iniziale Filamento" +msgstr "Gijos pradžios G-kodas" msgid "Filament end G-code" -msgstr "G-code Finale Filamento" - -msgid "Multimaterial" -msgstr "Multimateriale" +msgstr "Gijos pabaigos G-kodas" msgid "Wipe tower parameters" -msgstr "Parametri torre di pulitura" +msgstr "Valymo bokšto parametrai" -msgid "Toolchange parameters with single extruder MM printers" -msgstr "Parametri di cambio strumento per stampanti MM con estrusore singolo" +msgid "Multi Filament" +msgstr "" -msgid "Ramming settings" -msgstr "Impostazioni del ramming" +msgid "Tool change parameters with single extruder MM printers" +msgstr "" +"Įrankių keitimo parametrai naudojant vieno ekstruderio MM spausdintuvus" -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "Parametri di cambio strumento con stampanti MM multiestrusore" +msgid "Set" +msgstr "Nustatyti" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "Įrankių keitimo parametrai su kelių ekstruderių MM spausdintuvais" + +msgid "Dependencies" +msgstr "Priklausomybės" + +msgid "Compatible printers" +msgstr "Suderinami spausdintuvai" + +msgid "Compatible process profiles" +msgstr "Suderinamų procesų profiliai" msgid "Printable space" -msgstr "Spazio di stampa" +msgstr "Erdvė spausdinimui" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" -msgstr "Valore non valido fornito per il parametro %1%: %2%" +msgstr "Neteisinga parametro %1% reikšmė: %2%" msgid "G-code flavor is switched" -msgstr "La variante del G-Code è stata commutata" +msgstr "Perjungiamas G kodo tipas" msgid "Cooling Fan" -msgstr "Velocità minima ventola di raffreddamento" +msgstr "Aušinimo ventiliatorius" msgid "Fan speed-up time" -msgstr "Tempo di accelerazione della ventola" +msgstr "Ventiliatoriaus įsibėgėjimo laikas" msgid "Extruder Clearance" -msgstr "Ingombro estrusore" +msgstr "Ekstruderio laisvoji erdvė" msgid "Adaptive bed mesh" -msgstr "Rete del letto adattiva" +msgstr "Prisitaikanti pagrindo forma" msgid "Accessory" -msgstr "Accessori" +msgstr "Priedai" -msgid "Machine gcode" -msgstr "Macchina G-code" +msgid "Machine G-code" +msgstr "Įrenginio gkodas" msgid "Machine start G-code" -msgstr "G-code avvio della macchina" +msgstr "Įrangos paleidimo G-kodas" msgid "Machine end G-code" -msgstr "Fine G-code" +msgstr "Įrangos pabaigos G-kodas" msgid "Printing by object G-code" -msgstr "Stampa per oggetto G-code" +msgstr "Spausdinimas pagal objektą G-kodas" msgid "Before layer change G-code" -msgstr "G-code prima del cambio layer" +msgstr "G-kodas prieš keičiant sluoksnį" msgid "Layer change G-code" -msgstr "G-code cambio layer" +msgstr "Sluoksnio keitimas G-kodas" -msgid "Time lapse G-code" -msgstr "Time lapse G-code" +msgid "Timelapse G-code" +msgstr "Pakadrinio filmavimo G-kodas" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" -msgstr "G-code cambio filamento" +msgstr "Gijos keitimo G-kodas" msgid "Change extrusion role G-code" -msgstr "Modificare il codice G del ruolo di estrusione" +msgstr "Keisti išspaudimo vaidmenį G-kodas" msgid "Pause G-code" -msgstr "G-code Pausa" +msgstr "Pauzė G-kodas" msgid "Template Custom G-code" -msgstr "Modello G-code personalizzato" +msgstr "Pasirinktinis G-kodo šablonas" msgid "Motion ability" -msgstr "Capacità di movimento" +msgstr "Judėjimo parinktys" msgid "Normal" -msgstr "Normale" +msgstr "Normalus" + +msgid "Resonance Avoidance" +msgstr "Rezonanso vengimas" + +msgid "Resonance Avoidance Speed" +msgstr "Rezonanso išvengimo greitis" msgid "Speed limitation" -msgstr "Limitazione velocità" +msgstr "Greičio ribojimas" msgid "Acceleration limitation" -msgstr "Limita Accelerazione" +msgstr "Pagreičio ribojimas" msgid "Jerk limitation" -msgstr "Limitazione jerk" +msgstr "Trūkčiojimo ribojimai" -msgid "Single extruder multimaterial setup" -msgstr "Configurazione multimateriale estrusore singolo" +msgid "Single extruder multi-material setup" +msgstr "Vieno ekstruderio kelių medžiagų sąranka" + +msgid "Number of extruders of the printer." +msgstr "Spausdintuvo ekstruderių skaičius." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Pasirinkta vieno ekstruderio daugialypė medžiaga,\n" +"ir visi ekstruderiai turi būti vienodo skersmens.\n" +"Ar norite pakeisti visų ekstruderių skersmenį į pirmojo ekstruderio antgalio " +"skersmens vertę?" + +msgid "Nozzle diameter" +msgstr "Purkštuko skersmuo" msgid "Wipe tower" -msgstr "Torre di pulitura" +msgstr "Valymo bokštas" -msgid "Single extruder multimaterial parameters" -msgstr "Parametri estrusore singolo materiale multiplo" +msgid "Single extruder multi-material parameters" +msgstr "Vieno ekstruderio kelių medžiagų parametrai" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Tai yra vieno ekstruderio ir kelių medžiagų spausdintuvas, todėl visų " +"ekstruderių skersmenys bus nustatyti pagal naują vertę. Ar norite tęsti?" msgid "Layer height limits" -msgstr "Limiti altezza layer" +msgstr "Sluoksnio aukščio ribos" -msgid "Lift Z Enforcement" -msgstr "Applicazione dell'ascensore Z" +msgid "Z-Hop" +msgstr "Z šuolis" msgid "Retraction when switching material" -msgstr "Retrazione quando si cambia materiale" +msgstr "Įtraukimas keičiant medžiagą" msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"La funzione Pulitura non è disponibile quando si usa la modalità Retrazione " -"Firmware.\n" +"Parinktis \"Išvalyti\" negalima, kai naudojamas Firmware įtraukimo režimas.\n" "\n" -"Devo disattivarla per poter abilitare la Retrazione Firmware?" +"Ar turėčiau jį išjungti, kad įjungčiau Programinės įrangos įtraukimą?" msgid "Firmware Retraction" -msgstr "Retrazione Firmware" +msgstr "Programinės aparatinės įrangos ištraukimas" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" -msgstr "Distaccato" +msgstr "Atjungta" #, c-format, boost-format msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Preimpostazione filamento (Filament Preset) e %d Process Preset ( Process " -"Preset sono collegate a questa stampante. Tali impostazioni predefinite " -"verranno eliminate se la stampante viene eliminata." +"Šiam spausdintuvui yra prijungtas %d iš anksto nustatytas gijų rinkinys ir " +"%d iš anksto nustatytas procesas. Jei spausdintuvas bus ištrintas, šie " +"išankstiniai nustatymai bus ištrinti." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "I preset ereditati da altri preset non possono essere eliminati!" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "Paveldėtų iš anksto nustatytų nustatymų negalima ištrinti!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "I seguenti predefiniti ereditano questo predefinito." -msgstr[1] "I seguenti predefiniti ereditano questo predefinito." +msgstr[0] "Šį nustatymą paveldi šis išankstinis nustatymas." +msgstr[1] "Šiuos nustatymus paveldi šie išankstiniai nustatymai." +msgstr[2] "Šiuos nustatymus paveldi šie išankstiniai nustatymai." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Preset" +msgstr "%1% iš anksto nustatytas" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." -msgstr[0] "Verrà eliminato anche il seguente preset:" -msgstr[1] "The following presets will be deleted too:" - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Sei sicuro di voler eliminare il preset selezionato? \n" -"Se la preimpostazione corrisponde a un filamento attualmente in uso sulla " -"stampante, reimpostare le informazioni sul filamento per tale slot." +msgstr[0] "Bus ištrintas ir šis išankstinis nustatymas." +msgstr[1] "Bus ištrinti ir šie išankstiniai nustatymai." +msgstr[2] "Bus ištrinti ir šie išankstiniai nustatymai." #, boost-format msgid "Are you sure to %1% the selected preset?" -msgstr "Sei sicuro di voler %1% il preset selezionato?" +msgstr "Ar tikrai naudojate %1% pasirinktą išankstinį nustatymą?" -msgid "All" -msgstr "Tutto" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Imposta" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" -"Fare clic per ripristinare il valore corrente e associarlo al valore globale." +"Spustelėkite , jei norite iš naujo nustatyti dabartinę reikšmę ir prijungti " +"ją prie bendros reikšmės." msgid "Click to drop current modify and reset to saved value." msgstr "" -"Fai clic per eliminare le modifiche correnti e ripristinare il valore " -"salvato." +"Spustelėkite , jei norite atsisakyti dabartinio pakeitimo ir atstatyti " +"išsaugotą reikšmę." msgid "Process Settings" -msgstr "Impostazioni processo" +msgstr "Proceso nustatymai" msgid "Undef" -msgstr "Indefinito" +msgstr "Neapib" msgid "Unsaved Changes" -msgstr "Modifiche non salvate" +msgstr "Neišsaugoti pakeitimai" msgid "Transfer or discard changes" -msgstr "Scarta o mantieni le modifiche" +msgstr "Pakeitimų perkėlimas arba atmetimas" msgid "Old Value" -msgstr "Valore precedente" +msgstr "Sena vertė" msgid "New Value" -msgstr "Nuovo valore" +msgstr "Nauja vertė" msgid "Transfer" -msgstr "Trasferisci" +msgstr "Perkėlimas" msgid "Don't save" -msgstr "Non salvare" +msgstr "Neišsaugoti" msgid "Discard" -msgstr "Cancella" +msgstr "Atsisakyti" msgid "Click the right mouse button to display the full text." -msgstr "" -"Clicca il pulsante destro del mouse per visualizzare il testo completo." +msgstr "Spustelėkite dešinįjį pelės klavišą, kad būtų rodomas visas tekstas." msgid "All changes will not be saved" -msgstr "Nessuna modifica verrà salvata." +msgstr "Pakeitimai nebus išsaugoti" msgid "All changes will be discarded." -msgstr "Tutte le modifiche verranno eliminate." +msgstr "Visi pakeitimai bus atmesti." msgid "Save the selected options." -msgstr "Salvare le opzioni selezionate." +msgstr "Išsaugoti pasirinktas parinktis." msgid "Keep the selected options." -msgstr "Mantieni le opzioni selezionate." +msgstr "Išlaikykite pasirinktas parinktis." msgid "Transfer the selected options to the newly selected preset." -msgstr "Trasferisci le opzioni selezionate nel preset appena selezionato." +msgstr "" +"Perkelkite pasirinktas parinktis į naujai pasirinktą išankstinį nustatymą." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" -"Salva le opzioni selezionate in un preset \n" +"Pasirinktų parinkčių išsaugojimas profilyje\n" "\"%1%\"." #, boost-format @@ -8182,233 +9647,389 @@ msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"Trasferisci le opzioni selezionate nel preset appena selezionato \n" +"Pasirinktų parinkčių perkėlimas į naujai pasirinktą profilį\n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "Preset \"%1%\" contiene modifiche non salvate:" +msgstr "\"%1%\" profilyje yra šie neišsaugoti pakeitimai:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" non compatibile con il nuovo profilo della stampante e " -"contiene modifiche non salvate:" +"\"%1%\" profilis nesuderinamas su naujuoju spausdintuvo profiliu ir jame yra " +"šie neišsaugoti pakeitimai:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" msgstr "" -"Preset \"%1%\" non compatibile con il nuovo profilo di processo e contiene " -"modifiche non salvate:" +"\"%1%\" profilis nesuderinamas su naujuoju proceso profiliu ir jame yra šie " +"neišsaugoti pakeitimai:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Pakeitėte kai kuriuos išankstinio nustatymo \"%1%\" parametrus." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" -"You can save or discard the preset values you have modified." +"Pakeistas profilio reikšmes galite išsaugoti arba atmesti." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to " "transfer the values you have modified to the new preset." msgstr "" +"\n" +"Pakeistas profilio reikšmes galite išsaugoti arba atmesti, arba pasirinkti " +"perkelti pakeistas vertes į naują profilį." msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "Anksčiau pakeitėte savo nustatymus." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer " "the modified values to the new project" msgstr "" +"\n" +"Galite atsisakyti pakeistų iš anksto nustatytų reikšmių arba nuspręsti " +"perkelti pakeistas reikšmes į naują projektą" msgid "Extruders count" -msgstr "Conteggio estrusori" - -msgid "General" -msgstr "Generale" +msgstr "Ekstruderių kiekis" msgid "Capabilities" -msgstr "Caratteristiche" +msgstr "Galimybės" msgid "Show all presets (including incompatible)" -msgstr "Mostra tutti i preset (compresi non compatibili)" +msgstr "Rodyti visus išankstinius nustatymus (įskaitant nesuderinamus)" msgid "Select presets to compare" -msgstr "Seleziona i preset da confrontare" +msgstr "Pasirinkite išankstinius nustatymus, kuriuos norite palyginti" msgid "" "You can only transfer to current active profile because it has been modified." msgstr "" -"È possibile trasferire al profilo attivo corrente solo perché è stato " -"modificato." +"Galite perkelti tik į dabartinį aktyvų profilį, nes jis buvo pakeistas." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" -"Trasferisce le opzioni selezionate dal preset di sinistra a quello di " -"destra.\n" -"Nota: i nuovi preset modificati saranno selezionati nelle schede delle " -"impostazioni dopo la chiusura di questa finestra." +"Perkelkite pasirinktas parinktis iš kairiojo išankstinio nustatymo į " +"dešinįjį.\n" +"Pastaba: Uždarius šį dialogo langą, naujai pakeistos išankstinės nuostatos " +"bus pasirinktos nustatymų skirtukuose." msgid "Transfer values from left to right" -msgstr "Trasferimento dei valori da sinistra a destra" +msgstr "Reikšmių perkėlimas iš kairės į dešinę" msgid "" "If enabled, this dialog can be used for transfer selected values from left " "to right preset." msgstr "" -"Se abilitata, questa finestra può essere utilizzata per trasferire i valori " -"selezionati dal preset di sinistra a quello di destra." +"Jei įjungta, šis dialogo langas gali būti naudojamas pasirinktoms reikšmėms " +"perkelti iš kairiojo į dešinįjį išankstinį nustatymą." msgid "Add File" -msgstr "Aggiungi file" +msgstr "Pridėti failą" msgid "Set as cover" -msgstr "Impostare come copertina" +msgstr "Nustatyti kaip dangtelį" msgid "Cover" -msgstr "Cover" +msgstr "Dangtelis" #, boost-format msgid "The name \"%1%\" already exists." -msgstr "Il nome \"%1%\" già esiste." +msgstr "Pavadinimas \"%1%\" jau egzistuoja." msgid "Basic Info" -msgstr "Info di base" +msgstr "Pagrindinė informacija" msgid "Pictures" -msgstr "Immagini" +msgstr "Paveikslėliai" msgid "Bill of Materials" -msgstr "Lista materiali" +msgstr "Medžiagų sąmata" msgid "Assembly Guide" -msgstr "Guida al montaggio" +msgstr "Surinkimo vadovas" msgid "Author" -msgstr "Autore" +msgstr "Autorius" msgid "Model Name" -msgstr "Nome modello" +msgstr "Modelio pavadinimas" + +msgid "Description:" +msgstr "Aprašymas:" #, c-format, boost-format msgid "%s Update" -msgstr "%s Update" +msgstr "%s Atnaujinimas" msgid "A new version is available" -msgstr "Una nuova versione è disponibile." +msgstr "Yra nauja versija" msgid "Configuration update" -msgstr "Aggiornamento di configurazione" +msgstr "Konfigūracijos atnaujinimas" -msgid "A new configuration package available, Do you want to install it?" -msgstr "È disponibile un nuovo pacchetto di configurazione. Vuoi installarlo?" - -msgid "Description:" -msgstr "Descrizione:" +msgid "A new configuration package is available. Do you want to install it?" +msgstr "Yra naujas konfigūracijos paketas, Ar norite jį įdiegti?" msgid "Configuration incompatible" -msgstr "Configuration incompatible" +msgstr "Nesuderinama konfigūracija" -msgid "the configuration package is incompatible with current application." -msgstr "" -"il pacchetto di configurazione non è compatibile con l'applicazione corrente." +msgid "the configuration package is incompatible with the current application." +msgstr "konfigūracijos paketas nesuderinamas su dabartine programa." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" -"Pacchetto configurazione non compatibile con l'applicazione corrente.\n" -"%s aggiornerà il pacchetto configurazione per consentire l'avvio " -"dell'applicazione." +"Konfigūracijos paketas nesuderinamas su dabartine programa.\n" +"%s atnaujins konfigūracijos paketą, kad būtų galima paleisti programą." #, c-format, boost-format msgid "Exit %s" -msgstr "Chiudi %s" - -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"Il pacchetto di configurazione non è compatibile con la versione corrente di " -"Snapmaker Orca." +msgstr "Išeiti iš %s" msgid "Configuration updates" -msgstr "Aggiornamenti di configurazione" +msgstr "Konfigūracijos atnaujinimai" msgid "No updates available." -msgstr "Nessun aggiornamento disponibile." +msgstr "Atnaujinimų nėra." msgid "The configuration is up to date." -msgstr "Configurazione aggiornata." +msgstr "Konfigūracija yra naujausia." -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Obj failo importavimo spalva" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "Nurodykite spalvų kiekį:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "Rekomenduojama " -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "Spalvų atitikimas" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "Apytikslis spalvų atitikimas." msgid "Append" -msgstr "Append" +msgstr "Pridėti" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "Iš naujo nustatykite pažymėtus ekstruderius." -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Naudoti AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Pasirinktas spausdintuvas (%s) nesuderinamas su pasirinktu spausdintuvo " +"profiliu programoje (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Pakadrinis įrašymas nepalaikomas, nes pasirinkta spausdinimo eiga \"Pagal " +"objektą\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" -msgstr "Personalizzazione del ramming" +msgstr "Spasdinimo galvutės stūmimo pritaikymas" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" @@ -8421,1042 +10042,1079 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"Per Ramming si intende l'estrusione rapida appena prima di un cambio " -"strumento in una stampante MM con estrusore singolo. Il suo scopo è quello " -"di dare una forma corretta all'estremità del filamento scaricato, in modo " -"che non impedisca l'inserimento del nuovo filamento e possa essere " -"reinserito successivamente. Questa fase è importante e i diversi materiali " -"possono richiedere velocità di estrusione diverse per ottenere una buona " -"forma. Per questo motivo, le velocità di estrusione nella fase di ramming " -"sono regolabili.\n" +"Ramingas reiškia greitą ekstruziją prieš pat įrankio pakeitimą vieno " +"ekstruderio MM spausdintuve. Jo paskirtis – tinkamai suformuoti neapkrautos " +"gijos galą, kad jis netrukdytų įkišti naujai gijai ir vėliau ją būtų galima " +"įkišti iš naujo. Šis etapas yra svarbus, skirtingoms medžiagoms gali " +"prireikti skirtingo ekstruzijos greičio, kad būtų gauta gera forma. Dėl šios " +"priežasties ekstruzijos greitis štampavimo metu yra reguliuojamas.\n" "\n" -"Si tratta di un'impostazione per esperti: una regolazione errata potrebbe " -"causare inceppamenti, la macinazione del filamento da parte dell'ingranaggio " -"dell'estrusore e così via." +"Tai yra eksperto lygio nustatymas, neteisingas sureguliavimas gali sukelti " +"strigčių, ekstruderio rato gijos šlifavimą ir pan." -msgid "Total ramming time" -msgstr "Durata totale di ramming" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" +"Norėdami išlaikyti pastovų srauto greitį, vilkdami laikykite nuspaudę %1%." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "Bendras rammingas" -msgid "Total rammed volume" -msgstr "Volume totale di ramming" +msgid "Volume" +msgstr "Tūris" -msgid "Ramming line width" -msgstr "Larghezza della linea di Ramming" - -msgid "Ramming line spacing" -msgstr "Spaziatura tra linee di ramming" - -msgid "Auto-Calc" -msgstr "Calcolo automatico" - -msgid "Re-calculate" -msgstr "Ricalcolo" - -msgid "Flushing volumes for filament change" -msgstr "Volumi di spurgo per il cambio filamento" +msgid "Ramming line" +msgstr "Ramming linija" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca ricalcolava i volumi di spurgo ogni volta che il colore dei filamenti " -"cambiava. È possibile disabilitare il calcolo automatico nelle preferenze > " -"di Snapmaker Orca" msgid "Flushing volume (mm³) for each filament pair." -msgstr "Volume di spurgo (mm³) per ogni coppia di filamento." +msgstr "Kiekvienos gijų poros išmetimo tūris (mm³)." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "Suggerimento: Volume di spurgo nell'intervallo [%d, %d]" +msgstr "Pasiūlymas: Išmetimo tūris [%d, %d] ribose" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." -msgstr "Il moltiplicatore deve essere compreso nell'intervallo [%.2f, %.2f]." +msgstr "Daugiklis turėtų būti iš intervalo [%.2f, %.2f]." + +msgid "Re-calculate" +msgstr "Perskaičiuoti" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" msgid "Multiplier" -msgstr "Moltiplicatore" +msgstr "Daugiklis" -msgid "unloaded" -msgstr "scaricato" +msgid "Flushing volumes for filament change" +msgstr "Išmetimo tūris keičiant gijas" -msgid "loaded" -msgstr "caricato" - -msgid "Filament #" -msgstr "Filamento #" - -msgid "From" -msgstr "Da" - -msgid "To" -msgstr "A" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"Šiai užduočiai atlikti reikalingas \"Windows Media Player\"! Ar norite " +"įjungti \"Windows Media Player\" savo operacinėje sistemoje?" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" msgstr "" +"\"BambuSource\" neteisingai užregistruotas medijos atkūrimui! Paspauskite " +"Yes (taip), kad jį perregistruotumėte. Jums bus priminta du kartus" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" +"Trūksta „BambuSource“ komponento, registruoto medijos atkūrimui! Iš naujo " +"įdiekite „BambuStudio“ arba kreipkitės į pagalbą po pardavimo." msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" +"Naudojant \"BambuSource\" iš kito diegimo šaltinio, vaizdo įrašų atkūrimas " +"gali būti neteisingas! Paspauskite Taip, kad tai ištaisytumėte." msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"Jūsų sistemoje nėra \"GStreamer\" H.264 kodekų, reikalingų vaizdo įrašams " +"atkurti. (Pabandykite įdiegti gstreamer1.0-plugins-bad arba gstreamer1.0-" +"libav paketus, tada iš naujo paleiskite \"Snapmaker Orca\")" msgid "Bambu Network plug-in not detected." -msgstr "Plug-in di rete Bambu non rilevato." +msgstr "\"Bambu\" tinklo papildinys neaptiktas." msgid "Click here to download it." -msgstr "Clicca qui per scaricarlo." +msgstr "Spustelėkite čia, jei norite jį atsisiųsti." msgid "Login" -msgstr "Login" +msgstr "Prisijungti" msgid "The configuration package is changed in previous Config Guide" -msgstr "" -"Il pacchetto di configurazione è stato modificato nella precedente Guida " -"alla configurazione" +msgstr "Konfigūracijos paketas pakeistas ankstesniame Config Guide" msgid "Configuration package changed" -msgstr "Pacchetto di configurazione modificato" +msgstr "Pakeistas konfigūracijos paketas" msgid "Toolbar" -msgstr "Toolbar" +msgstr "Įrankių juosta" msgid "Objects list" -msgstr "Elenco oggetti" +msgstr "Objektų sąrašas" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Importa geometrie da file STL/STEP/3MF/OBJ/AMF." - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "Importuoti geometrijos duomenis iš STL/STEP/3MF/OBJ/AMF failų" msgid "Paste from clipboard" -msgstr "Incolla dagli appunti" +msgstr "Įklijuoti iš mainų srities" msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "" -"Mostra/nascondi la finestra di dialogo impostazioni dei dispositivi " -"3Dconnexion" +msgstr "Rodyti/slėpti 3DConnexion įrenginių nustatymų dialogo langą" msgid "Switch table page" -msgstr "Cambia pagina tabella" +msgstr "Perjungti lentelės puslapį" msgid "Show keyboard shortcuts list" -msgstr "Mostra elenco scorciatoie di tastiera" +msgstr "Rodyti sparčiųjų klavišų sąrašą" msgid "Global shortcuts" -msgstr "Scorciatoie globali" - -msgid "Rotate View" -msgstr "Ruota vista" +msgstr "Bendrieji spartieji klavišai" msgid "Pan View" -msgstr "Vista panoramica" +msgstr "Judinti vaizdą" -msgid "Mouse wheel" -msgstr "Rotella del mouse" +msgid "Rotate View" +msgstr "Pasukti vaizdą" msgid "Zoom View" -msgstr "Vista Zoom" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "Padidinti vaizdą" msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"Questo orienta automaticamente gli oggetti selezionati o tutti gli oggetti. " -"Se ci sono oggetti selezionati, orienta solo quelli selezionati. Altrimenti, " -"orienterà tutti gli oggetti nel piatto corrente." +"Automatiškai orientuoja pasirinktus objektus arba visus objektus. Jei yra " +"pasirinkti objektai, orientuoja tik pasirinktus. Kitais atvejais orientuoja " +"visus esamo projekto objektus." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Automatiškai orientuoja visus objektus aktyvioje plokštelėje." msgid "Collapse/Expand the sidebar" -msgstr "Riduci/Espandi barra laterale" +msgstr "Sutraukti / išskleisti šoninę juostą" -msgid "⌘+Any arrow" -msgstr "⌘+Freccia qualsiasi" +msgid "Any arrow" +msgstr "Bet kuri rodyklė" msgid "Movement in camera space" -msgstr "Movimento nello spazio della camera" - -msgid "⌥+Left mouse button" -msgstr "⌥+Tasto sinistro mouse" +msgstr "Judėjimas kameros erdvėje" msgid "Select a part" -msgstr "Seleziona parte" - -msgid "⌘+Left mouse button" -msgstr "⌘+Tasto sinistro del mouse" +msgstr "Pasirinkite detalę" msgid "Select multiple objects" -msgstr "Seleziona più oggetti" - -msgid "Ctrl+Any arrow" -msgstr "Ctrl+qualsiasi freccia" - -msgid "Alt+Left mouse button" -msgstr "Alt+tasto sinistro del mouse" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Tasto sinistro del mouse" - -msgid "Shift+Left mouse button" -msgstr "Shift+tasto sinistro mouse" +msgstr "Pasirinkite kelis objektus" msgid "Select objects by rectangle" -msgstr "Seleziona oggetti per rettangolo" +msgstr "Objektų pasirinkimas pagal stačiakampį" msgid "Arrow Up" -msgstr "Freccia Su" +msgstr "Rodyklė aukštyn" msgid "Move selection 10 mm in positive Y direction" -msgstr "Sposta selezione 10 mm in direzione Y positiva" +msgstr "Perkelti pasirinktą 10 mm teigiama Y kryptimi" msgid "Arrow Down" -msgstr "Freccia Giù" +msgstr "Rodyklė žemyn" msgid "Move selection 10 mm in negative Y direction" -msgstr "Sposta selezione 10 mm in direzione Y negativa" +msgstr "Perkelti pasirinktą10 mm neigiama Y kryptimi" msgid "Arrow Left" -msgstr "Freccia Sinistra" +msgstr "Rodyklė Kairėn" msgid "Move selection 10 mm in negative X direction" -msgstr "Sposta selezione 10 mm in direzione X negativa" +msgstr "Perkelti pasirinktą10 mm neigiama X kryptimi" msgid "Arrow Right" -msgstr "Freccia Destra" +msgstr "Rodyklė dešinėn" msgid "Move selection 10 mm in positive X direction" -msgstr "Sposta selezione 10 mm in direzione X positiva" - -msgid "Shift+Any arrow" -msgstr "Shift+freccia qualsiasi" +msgstr "Perkelti pasirinktą10 mm teigiama X kryptimi" msgid "Movement step set to 1 mm" -msgstr "Passo movimento impostato a 1 mm" +msgstr "Judėjimo žingsnis nustatytas į 1 mm" msgid "keyboard 1-9: set filament for object/part" -msgstr "Tastiera 1-9: imposta il filamento per l'oggetto/la parte" +msgstr "klaviatūra 1-9: nustatyti objekto/dalies giją" msgid "Camera view - Default" -msgstr "Vista telecamera - Default" +msgstr "Kameros vaizdas - Numatytasis" msgid "Camera view - Top" -msgstr "Vista telecamera - In Alto" +msgstr "Kameros vaizdas - Viršus" msgid "Camera view - Bottom" -msgstr "Vista telecamera - Basso" +msgstr "Kameros vaizdas - Apačia" msgid "Camera view - Front" -msgstr "Vista telecamera - Fronte" +msgstr "Kameros vaizdas - Priekis" msgid "Camera view - Behind" -msgstr "Vista telecamera - Dietro" +msgstr "Kameros vaizdas - Galas" msgid "Camera Angle - Left side" -msgstr "Angolo della camera - Lato sinistro" +msgstr "Kameros vaizdas - Kairė" msgid "Camera Angle - Right side" -msgstr "Angolo della camera - Lato destro" +msgstr "Kameros vaizdas - Dešnė" msgid "Select all objects" -msgstr "Seleziona tutti gli oggetti" +msgstr "Pasirinkti visus objektus" msgid "Gizmo move" -msgstr "Muovi Gizmo" - -msgid "Gizmo scale" -msgstr "Scala Gizmo" +msgstr "Gizmo perkėlimui" msgid "Gizmo rotate" -msgstr "Ruota Gizmo" +msgstr "Gizmo pasukimas" + +msgid "Gizmo scale" +msgstr "Gizmo dydžio keitimui" + +msgid "Gizmo place face on bed" +msgstr "Gizmo padėti paviršių ant pagrindo" msgid "Gizmo cut" -msgstr "Taglia Gizmo" +msgstr "Gizmo pjaustymui" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Posiziona faccia sul piano" +msgid "Gizmo mesh boolean" +msgstr "Gizmo objektų jungimo/atėmimo/susikirtimo įrankiai" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM dažomas grublėtas paviršius" msgid "Gizmo SLA support points" -msgstr "Punti di supporto SLA Gizmo" +msgstr "Gizmo SLA atramų taškai" msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM pittura giunzione" +msgstr "Gizmo FDM siūlių piešimui" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Testo in rilievo / incisione" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo teksto įspaudimas/graviravimas" + +msgid "Gizmo measure" +msgstr "Gizmo matuoti" + +msgid "Gizmo assemble" +msgstr "Gizmo surinkimo" + +msgid "Gizmo brim ears" +msgstr "Gizmo krašto \"ausys\"" msgid "Zoom in" -msgstr "Zoom in" +msgstr "Padidinti" msgid "Zoom out" -msgstr "Zoom out" +msgstr "Nutolinti" msgid "Switch between Prepare/Preview" -msgstr "Swtich tra Prepare/Prewview" +msgstr "Perjungimas tarp Paruošti / Peržiūrėti" msgid "Plater" -msgstr "Piano" +msgstr "Plokštė" msgid "Move: press to snap by 1mm" -msgstr "Sposta: premi per muovere di 1 mm" - -msgid "⌘+Mouse wheel" -msgstr "⌘+Rotella mouse" +msgstr "Perkėlimas: paspauskite, jei norite paslinkti 1 mm" msgid "Support/Color Painting: adjust pen radius" -msgstr "Supporto/Pittura a colori: regolare il raggio della penna" - -msgid "⌥+Mouse wheel" -msgstr "⌥+Rotella mouse" +msgstr "Atramų / Spalvų piešimas: sureguliuoti rašiklio spindulį" msgid "Support/Color Painting: adjust section position" -msgstr "Supporto/Pittura a colori: regolare la posizione della sezione" - -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Rotellina del mouse" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Rotella del mouse" +msgstr "Atramų / spalvų piešimas: koreguoti sekcijos padėtį" msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" -msgstr "Imposta il numero estrusore per gli oggetti e le parti" +msgstr "Nustatykite ekstruderio numerį objektams ir dalims" -msgid "Delete objects, parts, modifiers " -msgstr "Eliminare oggetti, parti, modificatori " +msgid "Delete objects, parts, modifiers" +msgstr "Ištrinti objektus, dalis, modifikatorius" msgid "Select the object/part and press space to change the name" msgstr "" -"Seleziona l'oggetto/la parte e premi la barra spaziatrice per cambiare il " -"nome" +"Pasirinkite objektą ir (arba) dalį ir paspauskite tarpo klavišą, kad " +"pakeistumėte pavadinimą" msgid "Mouse click" -msgstr "Clic del mouse" +msgstr "Pelės paspaudimas" msgid "Select the object/part and mouse click to change the name" msgstr "" -"Seleziona l'oggetto/la parte e fai clic con il mouse per modificare il nome" +"Pasirinkite objektą/dalį ir spustelėkite pele, kad pakeistumėte pavadinimą" msgid "Objects List" -msgstr "Elenco oggetti" +msgstr "Objektų sąrašas" msgid "Vertical slider - Move active thumb Up" -msgstr "Cursore di scorrimento verticale - Solleva cursore attivo" +msgstr "Vertikalus slankiklis – perkelti aktyvųjį slankiklį aukštyn" msgid "Vertical slider - Move active thumb Down" -msgstr "Cursore di scorrimento verticale - Abbassa cursore attivo" +msgstr "Vertikalus slankiklis – perkelti aktyvųjį slankiklį žemyn" msgid "Horizontal slider - Move active thumb Left" -msgstr "" -"Cursore di scorrimento orizzontale - Sposta a sinistra il cursore attivo" +msgstr "Horizontalus slankiklis – perkelti aktyvų slankiklį į kairę" msgid "Horizontal slider - Move active thumb Right" -msgstr "Cursore di scorrimento orizzontale - Sposta a destra il cursore attivo" +msgstr "Horizontalus slankiklis – perkelti aktyvų slankiklį į dešinę" msgid "On/Off one layer mode of the vertical slider" -msgstr "On/Off modalità un layer del cursore di scorrimento verticale" +msgstr "Vertikalaus slankiklio vieno sluoksnio režimas įjungimas / išjungimas" -msgid "On/Off g-code window" -msgstr "Attivazione/disattivazione della finestra g-code" +msgid "On/Off G-code window" +msgstr "G-kodo lango įjungimas / išjungimas" msgid "Move slider 5x faster" -msgstr "Sposta il cursore 5 volte più velocemente" - -msgid "Shift+Mouse wheel" -msgstr "Shift+Rotella mouse" +msgstr "Judinkite slankiklį 5 kartus greičiau" msgid "Horizontal slider - Move to start position" -msgstr "" +msgstr "Horizontalus šliaužiklis - Perkelti į pradinę padėtį" msgid "Horizontal slider - Move to last position" -msgstr "" +msgstr "Horizontalusis slankiklis - Perkelti į paskutinę padėtį" msgid "Release Note" -msgstr "Note di aggiornamento" +msgstr "Leidimo pastaba" #, c-format, boost-format -msgid "version %s update information :" -msgstr "Versione %s informazioni aggiornate:" +msgid "version %s update information:" +msgstr "versijos %s atnaujinimo informacija:" msgid "Network plug-in update" -msgstr "Aggiornamento del plug-in di rete" +msgstr "Tinklo papildinio atnaujinimas" msgid "" "Click OK to update the Network plug-in when Snapmaker Orca launches next time." msgstr "" -"Clicca su OK per aggiornare il plug-in di rete al prossimo avvio di Bambu " -"Studio." +"Spustelėkite OK, kad kitą kartą paleidus \"Snapmaker Orca\" būtų atnaujintas " +"tinklo papildinys." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "Disponibile nuovo plug-in di rete (%s). Vuoi installarlo?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Yra naujas tinklo papildinys(%s), ar norite jį įdiegti?" msgid "New version of Snapmaker Orca" -msgstr "Nuova versione di Snapmaker Orca" +msgstr "Nauja \"Snapmaker Orca\" versija" msgid "Skip this Version" -msgstr "Salta questa versione" - -msgid "Done" -msgstr "Fine" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Carica" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" +msgstr "Praleisti šią versiją" msgid "Confirm and Update Nozzle" -msgstr "Conferma e aggiorna l'ugello" +msgstr "Patvirtinti ir atnaujinti purkštuką" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Connessione LAN fallita (invio del file di stampa)" +msgid "Connect the printer using IP and access code" +msgstr "Prijunkite spausdintuvą naudodami IP ir prieigos kodą" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Step 1, conferma che Snapmaker Orca e la tua stampante siano sulla stessa LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Step 2, se l'IP e il codice di accesso riportati di seguito sono diversi dai " -"valori effettivi sulla stampante, correggili." msgid "IP" msgstr "IP" msgid "Access Code" -msgstr "Codice di accesso" +msgstr "Prieigos kodas" + +msgid "Printer model" +msgstr "Spausdintuvo modelis" + +msgid "Printer name" +msgstr "Spausdintuvo pavadinimas" msgid "Where to find your printer's IP and Access Code?" -msgstr "Dove trovo l'IP e il codice accesso della stampante?" +msgstr "Kur rasti spausdintuvo IP ir prieigos kodą?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Passaggio 3: eseguire il ping dell'indirizzo IP per verificare la perdita di " -"pacchetti e la latenza." +msgid "Connect" +msgstr "Jungtis" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Rankinė sąranka" msgid "IP and Access Code Verified! You may close the window" -msgstr "IP e codice di accesso verificati! È possibile chiudere la finestra" +msgstr "Patikrintas IP ir prieigos kodas! Galite uždaryti langą" + +msgid "connecting..." +msgstr "jungiamasi..." + +msgid "Failed to connect to printer." +msgstr "Nepavyko prisijungti prie spausdintuvo." + +msgid "Failed to publish login request." +msgstr "Nepavyko paskelbti prisijungimo užklausos." + +msgid "The printer has already been bound." +msgstr "Spausdintuvas jau surištas." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "Spausdintuvo režimas yra neteisingas, perjunkite į tik vietinį tinklą." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Jungimasis prie spausdintuvo... Dialogo langas užsidarys vėliau" msgid "Connection failed, please double check IP and Access Code" -msgstr "Connessione non riuscita, ricontrolla l'IP e il codice di accesso" +msgstr "Ryšys nepavyko, dar kartą patikrinkite IP ir prieigos kodą" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" -"Connessione non riuscita! Se l'IP e il codice di accesso sono corretti, \n" -"Passare al passaggio 3 per la risoluzione dei problemi di rete" +"Ryšys nepavyko! Jei jūsų IP ir prieigos kodas yra teisingi, \n" +"pereikite prie 3 žingsnio, skirto tinklo problemoms šalinti" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "Oro siurblys" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "Pjovimo modulis" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" -msgstr "Modello:" - -msgid "Serial:" -msgstr "Seriale:" - -msgid "Version:" -msgstr "Versione:" +msgstr "Modelis:" msgid "Update firmware" -msgstr "Aggiorna firmware" +msgstr "Atnaujinti programinę įrangą" msgid "Beta version" -msgstr "Versione beta" - -msgid "Latest version" -msgstr "Ultima versione" +msgstr "Beta versija" msgid "Updating" -msgstr "Aggiornamento in corso" +msgstr "Atnaujinama" -msgid "Updating failed" -msgstr "Aggiornamento fallito" +msgid "Update failed" +msgstr "Atnaujinti nepavyko" -msgid "Updating successful" -msgstr "Aggiornamento riuscito" +msgid "Update successful" +msgstr "Sėkmingas atnaujinimas" msgid "" "Are you sure you want to update? This will take about 10 minutes. Do not " "turn off the power while the printer is updating." msgstr "" -"Sei sicuro di voler aggiornare? Ci vorranno circa 10 minuti. Non spegnere " -"l'alimentazione durante l'aggiornamento della stampante." +"Ar tikrai norite atnaujinti? Tai užtruks apie 10 minučių. Neišjunkite " +"maitinimo, kol spausdintuvas atnaujinamas." msgid "" "An important update was detected and needs to be run before printing can " "continue. Do you want to update now? You can also update later from 'Upgrade " "firmware'." msgstr "" -"È stato rilevato un aggiornamento importante che deve essere eseguito prima " -"che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" -"\"." +"Buvo aptiktas svarbus atnaujinimas, kurį reikia paleisti, kad spausdinimas " +"būtų tęsiamas. Ar norite atnaujinti dabar? Taip pat galite atnaujinti " +"vėliau, naudodami \"Atnaujinti programinę įrangą\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " "printing. Do you want to update now? You can also update later on printer or " "update next time starting Orca." msgstr "" -"La versione firmware è anomala. Prima di stampare, è necessario eseguire la " -"riparazione e l'aggiornamento. Si desidera aggiornare ora? È possibile " -"eseguire l'aggiornamento anche in un secondo momento sulla stampante o al " -"prossimo avvio di Snapmaker Orca." +"Įterptinės programinės įrangos versija yra nenormali. Prieš spausdinant " +"reikia pataisyti ir atnaujinti. Ar norite atnaujinti dabar? Taip pat galite " +"atnaujinti vėliau spausdintuve arba atnaujinti kitą kartą paleisdami \"Orca" +"\"." msgid "Extension Board" -msgstr "Scheda di estensione" +msgstr "Išplėtimo plokštė" -msgid "Saving objects into the 3mf failed." -msgstr "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." +msgstr "Saving objects into the 3MF failed.Nepavyko įrašyti objektų į 3MF." msgid "Only Windows 10 is supported." -msgstr "È supportato solo Windows 10." +msgstr "Palaikoma tik \"Windows 10\"." msgid "Failed to initialize the WinRT library." -msgstr "Impossibile inizializzare la libreria WinRT." +msgstr "Nepavyko inicializuoti \"WinRT\" bibliotekos." msgid "Exporting objects" -msgstr "Esportazione oggetti" +msgstr "Objektų eksportavimas" msgid "Failed loading objects." -msgstr "Caricamento oggetti fallito." +msgstr "Nepavyko įkelti objektų." msgid "Repairing object by Windows service" -msgstr "Riparazione oggetto da parte del servizio Windows" +msgstr "Objekto taisymas \"Windows\" paslauga" msgid "Repair failed." -msgstr "Riparazione fallita." +msgstr "Taisymas nepavyko." msgid "Loading repaired objects" -msgstr "Caricamento oggetti riparati" +msgstr "Pataisytų objektų įkėlimas" -msgid "Exporting 3mf file failed" -msgstr "Esportazione del file 3mf non riuscita" +msgid "Exporting 3MF file failed" +msgstr "Nepavyko eksportuoti 3MF failo" -msgid "Import 3mf file failed" -msgstr "Importazione del file 3mf non riuscita" +msgid "Import 3MF file failed" +msgstr "Nepavyko importuoti 3MF failo" -msgid "Repaired 3mf file does not contain any object" -msgstr "Il file 3mf riparato non contiene alcun oggetto." +msgid "Repaired 3MF file does not contain any object" +msgstr "Pataisytame 3MF faile nėra jokių objektų" -msgid "Repaired 3mf file contains more than one object" -msgstr "Il file 3mf riparato contiene più di un oggetto." +msgid "Repaired 3MF file contains more than one object" +msgstr "Pataisytame 3MF faile yra daugiau nei vienas objektas" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Il file 3mf riparato non contiene alcun volume." +msgid "Repaired 3MF file does not contain any volume" +msgstr "Pataisytame 3MF faile nėra jokio tūrio" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Il file 3mf riparato contiene più di un volume." +msgid "Repaired 3MF file contains more than one volume" +msgstr "Pataisytame 3MF faile yra daugiau nei vienas tomas" msgid "Repair finished" -msgstr "Riparazione finita" +msgstr "Taisymas baigtas" msgid "Repair canceled" -msgstr "Riparazione annullata" +msgstr "Taisymas atšauktas" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" -msgstr "Copia del file %1% su %2% non riuscita: %3%" +msgstr "Failo %1% kopijavimas į %2% nepavyko: %3%" msgid "Need to check the unsaved changes before configuration updates." msgstr "" -"Controllare le modifiche non salvate prima di aggiornare la configurazione." +"Prieš atnaujinant konfigūraciją reikia patikrinti neišsaugotus pakeitimus." msgid "Configuration package: " -msgstr "Pacchetto di configurazione: " +msgstr "Konfigūracijos paketas: " msgid " updated to " -msgstr " aggiornato a " +msgstr " atnaujintas į " msgid "Open G-code file:" -msgstr "Apri un file G-code:" +msgstr "Atidaryti G-kodo failą:" msgid "" "One object has empty initial layer and can't be printed. Please Cut the " "bottom or enable supports." msgstr "" -"Un oggetto ha un livello iniziale vuoto e non può essere stampato. Taglia il " -"fondo o abilita i supporti." +"Vienas objektas turi tuščią pradinį sluoksnį ir jo negalima spausdinti. " +"Iškirpkite apačią arba įjunkite atramas." #, boost-format msgid "Object can't be printed for empty layer between %1% and %2%." -msgstr "" -"L'oggetto ha layer vuoti compresi tra %1% e %2% e non può essere stampato." +msgstr "Objekto negalima spausdinti dėl tuščio sluoksnio tarp %1% ir %2%." #, boost-format msgid "Object: %1%" -msgstr "Oggetto: %1%" +msgstr "Objektas: %1%" msgid "" "Maybe parts of the object at these height are too thin, or the object has " "faulty mesh" msgstr "" -"Le parti dell'oggetto a queste altezze potrebbero essere troppo sottili o " -"l'oggetto potrebbe avere una mesh difettosa." +"Objekto dalys šiuose aukščiuose gali būti per plonos arba gali būti pažeista " +"objekto 3D figūra" msgid "No object can be printed. Maybe too small" -msgstr "" -"Non è possibile stampare alcun oggetto. Potrebbe essere troppo piccolo." +msgstr "Negalima spausdinti jokio objekto. Jis gali būti per mažas" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Jūsų spaudinys yra labai arti gruntavimo sričių. Įsitikinkite, kad nėra " +"susidūrimo." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"Impossibile generare il G-code per G-code personalizzato non valido.\n" +"Nepavyko sugeneruoti G kodo dėl neteisingo pasirinktinio G kodo.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "" -"Controlla il G-code personalizzato o utilizza il G-code personalizzato " -"predefinito." +"Patikrinkite pasirinktinį G-kodą arba naudokite numatytąjį pasirinktinį G-" +"kodą." #, boost-format msgid "Generating G-code: layer %1%" -msgstr "Genera G-code: layer %1%" +msgstr "G-kodo generavimas: sluoksnis %1%" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" msgid "Inner wall" -msgstr "Parete interna" +msgstr "Vidinė siena" msgid "Outer wall" -msgstr "Parete esterna" +msgstr "Išorinė siena" msgid "Overhang wall" -msgstr "Parete a sbalzo" +msgstr "Išsikišusi siena" msgid "Sparse infill" -msgstr "Riempimento" +msgstr "Retas užpildymas" msgid "Internal solid infill" -msgstr "Riempimento solido interno" +msgstr "Vidinis vientisas užpildas" msgid "Top surface" -msgstr "Superficie superiore" +msgstr "Viršutinis paviršius" msgid "Bottom surface" -msgstr "Superficie inferiore" +msgstr "Apatinis paviršius" msgid "Internal Bridge" -msgstr "Ponte interno" +msgstr "Vidinis tiltas" msgid "Gap infill" -msgstr "Riempimento gap" +msgstr "Tarpų užpildymas" msgid "Support interface" -msgstr "Interfaccia supporto" +msgstr "Atramų sąsaja" msgid "Support transition" -msgstr "Supporto alla transizione" +msgstr "Atramų perėjimas" msgid "Multiple" -msgstr "Multiplo" +msgstr "Keli" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" -"Impossibile calcolare la larghezza della linea di %1%. Impossibile ottenere " -"il valore \"%2%\" " +"Nepavyko apskaičiuoti linijos pločio %1%. Negalima gauti \"%2%\" reikšmės. " msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " "and extrusion width" msgstr "" -"Spaziatura non valida fornita a Flow::with_spacing (), controlla l'altezza " -"del livello e la larghezza di estrusione" +"Srautui Flow::with_spacing() pateiktas neteisingas tarpas, patikrinkite " +"sluoksnio aukštį ir išspaudimo plotį" msgid "undefined error" -msgstr "errore non definito" +msgstr "neapibrėžta klaida" msgid "too many files" -msgstr "troppi file" +msgstr "per daug failų" msgid "file too large" -msgstr "file troppo grande" +msgstr "per didelis failas" msgid "unsupported method" -msgstr "metodo non supportato" +msgstr "nepalaikomas metodas" msgid "unsupported encryption" -msgstr "criptaggio non supportato" +msgstr "nepalaikomas šifravimas" msgid "unsupported feature" -msgstr "caratteristica non supportata" +msgstr "nepalaikoma funkcija" msgid "failed finding central directory" -msgstr "directory centrale non trovata" +msgstr "nepavyko rasti centrinio katalogo" msgid "not a ZIP archive" -msgstr "non un archivio ZIP" +msgstr "ne ZIP archyvas" msgid "invalid header or corrupted" -msgstr "intestazione non valida o danneggiata" +msgstr "negaliojanti arba sugadinta antraštė" msgid "unsupported multidisk" -msgstr "Il salvataggio su RAID non supportato." +msgstr "įrašymas į RAID nepalaikomas" msgid "decompression failed" -msgstr "decompressione fallita" +msgstr "dekompresija nepavyko" msgid "compression failed" -msgstr "Compressione non riuscita" +msgstr "suspaudimas nepavyko" msgid "unexpected decompressed size" -msgstr "dimensione decompressa imprevista" +msgstr "netikėtas iškompresuotas dydis" msgid "CRC check failed" -msgstr "Controllo CRC non riuscito" +msgstr "CRC patikra nepavyko" msgid "unsupported central directory size" -msgstr "dimensione della directory centrale non supportata" +msgstr "nepalaikomas centrinio katalogo dydis" msgid "allocation failed" -msgstr "allocazione fallita" +msgstr "paskirstymas nepavyko" msgid "file open failed" -msgstr "apertura file non riuscita" +msgstr "nepavyko atverti failo" msgid "file create failed" -msgstr "generazione del file non riuscita" +msgstr "nepavyko sukurti failo" msgid "file write failed" -msgstr "scrittura file fallita" +msgstr "nepavyko įrašyti failo" msgid "file read failed" -msgstr "lettura del file non riuscita" +msgstr "nepavyko nuskaityti failo" msgid "file close failed" -msgstr "chiusura del file fallita" +msgstr "nepavyko uždaryti failo" msgid "file seek failed" -msgstr "ricerca file fallita" +msgstr "failo paieška nepavyko" msgid "file stat failed" -msgstr "statistica file non riuscita" +msgstr "failo statistika nepavyko" msgid "invalid parameter" -msgstr "parametro non valido" +msgstr "neteisingas parametras" msgid "invalid filename" -msgstr "nome file non valido" +msgstr "neteisingas failo pavadinimas" msgid "buffer too small" -msgstr "buffer troppo piccolo" +msgstr "per mažas buferis" msgid "internal error" -msgstr "errore interno" +msgstr "vidinė klaida" msgid "file not found" -msgstr "file non trovato" +msgstr "failas nerastas" msgid "archive too large" -msgstr "Archivio troppo grande" +msgstr "per didelis archyvas" msgid "validation failed" -msgstr "convalida non riuscita" +msgstr "patvirtinimas nepavyko" msgid "write callback failed" -msgstr "scrittura callback fallita" +msgstr "nepavyko įrašyti grįžtamojo ryšio" #, boost-format msgid "" "%1% is too close to exclusion area, there may be collisions when printing." msgstr "" -"%1% è troppo vicino all'area di esclusione, potrebbero verificarsi " -"collisioni durante la stampa." +"%1% yra per arti uždraustos srities, spausdinant gali įvykti susidūrimų." #, boost-format msgid "%1% is too close to others, and collisions may be caused." -msgstr "%1% è troppo vicino ad altri oggetti e potrebbe causare collisioni." +msgstr "%1% yra per arti kitų, todėl gali įvykti susidūrimas." #, boost-format msgid "%1% is too tall, and collisions will be caused." -msgstr "%1% è troppo alto e si verificheranno collisioni." - -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" è troppo vicino agli altri; potrebbero verificarsi delle collisioni durante " -"la stampa." +msgstr "%1% yra per aukštas, todėl įvyks susidūrimai." msgid " is too close to exclusion area, there may be collisions when printing." -msgstr "" -" è troppo vicino all'area di esclusione, potrebbero verificarsi collisioni " -"durante la stampa." - -msgid "Prime Tower" -msgstr "Prime Tower" - -msgid " is too close to others, and collisions may be caused.\n" -msgstr " è troppo vicino agli altri e possono verificarsi collisioni.\n" - -msgid " is too close to exclusion area, and collisions will be caused.\n" -msgstr "" -" è troppo vicino a un'area di esclusione e si verificheranno collisioni.\n" +msgstr " yra per arti uždraustosios zonos, spausdinant gali įvykti susidūrimų." msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + +msgid "Prime Tower" +msgstr "Pirminis bokštas" + +msgid " is too close to others, and collisions may be caused.\n" +msgstr " yra per arti kitų, todėl gali įvykti susidūrimai.\n" + +msgid " is too close to exclusion area, and collisions will be caused.\n" +msgstr " yra per arti uždraustosios zonos, todėl įvyks susidūrimai.\n" + +msgid "" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Non è possibile stampare insieme più filamenti con grandi differenze di " -"temperatura. In caso contrario, l'estrusore e il nozzle potrebbero bloccarsi " -"o danneggiarsi durante la stampa." msgid "No extrusions under current settings." -msgstr "Nessuna estrusione con le impostazioni attuali." +msgstr "Pagal dabartinius nustatymus nėra išspaudimų." msgid "" "Smooth mode of timelapse is not supported when \"by object\" sequence is " "enabled." msgstr "" -"La modalità fluida del timelapse non è supportata quando è abilitata la " -"sequenza \"per oggetto\"." +"Kai įjungta seka \"pagal objektą\", sklandus pakadrinio filmavimo režimas " +"nepalaikomas." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Seleziona la sequenza di stampa \"Per oggetto\" per stampare più oggetti in " -"modalità vaso a spirale." +"Pasirinkite spausdinimo seką \"Pagal objektą\", jei norite spausdinti kelis " +"objektus spiralinės vazos režimu." msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." msgstr "" -"La modalità Spirale (vaso) non funziona quando un oggetto contiene più di un " -"materiale." +"Spiralinės vazos režimas neveikia, kai objekte yra daugiau nei viena " +"medžiaga." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Nors pats objektas %1% telpa į surinkimo tūrį, jis viršija maksimalų " +"surinkimo tūrio aukštį dėl medžiagos susitraukimo kompensavimo." #, boost-format msgid "The object %1% exceeds the maximum build volume height." -msgstr "L'oggetto %1% supera l'altezza massima del volume di stampa." +msgstr "Objektas %1% viršija maksimalų galimą spausdinimo tūrio aukštį." #, boost-format msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." msgstr "" -"Sebbene l'oggetto %1% rientri nel volume di stampa, il suo ultimo layer " -"supera l'altezza massima." +"Nors pats objektas %1% telpa į spausdinimo tūrį, jo paskutinis sluoksnis " +"viršija didžiausią spausdinimo tūrio aukštį." msgid "" "You might want to reduce the size of your model or change current print " "settings and retry." msgstr "" -"È possibile ridurre le dimensioni del modello o modificare le impostazioni " -"di stampa correnti e riprovare." +"Galbūt norėsite sumažinti modelio dydį arba pakeisti esamus spausdinimo " +"nustatymus ir bandyti dar kartą." msgid "Variable layer height is not supported with Organic supports." -msgstr "Layer ad altezza variabile non è compatibile con i Supporti Organici." +msgstr "Kintamas sluoksnio aukštis nepalaikomas su \" Organinėmis atramomis\"." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Diametri degli ugelli diversi e diametri di filamento diversi non sono " -"consentiti quando la torre Prime è abilitata." +"Skirtingo skersmens purkštukai ir skirtingo skersmens gijos gali neveikti " +"gerai, kai įjungtas valymo bokštas. Tai labai eksperimentinė priemonė, todėl " +"elkitės atsargiai." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"Attualmente la Torre di pulitura è supportata solo con l'indirizzamento " -"relativo dell'estrusore (use_relative_e_distances = 1)." +"Valymo bokštas šiuo metu palaikomas tik naudojant santykinį ekstruderio " +"adresą (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"La prevenzione delle perdite (ooze prevention) attualmente non è supportata " -"quando è abilitata la torre di priming." +"Dumblo susidarymo prevencija palaikoma tik naudojant nuvalymo bokštą, kai " +"'single_extruder_multi_material' yra išjungta." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"La torre di spurgo è attualmente supportata solo per le versioni Marlin, " -"RepRap/Sprinter, RepRapFirmware e Repetier G-code." +"Pagrindinis bokštas šiuo metu palaikomas tik \"Marlin\", \"RepRap/Sprinter" +"\", \"RepRapFirmware\" ir \"Repetier\" G-kodo tipuose." msgid "The prime tower is not supported in \"By object\" print." -msgstr "La Prime Tower non è supportata nella stampa \"Per oggetto\"." +msgstr "Pirminis bokštas nepalaikomas spausdinant \"Pagal objektą\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"La Prime Tower non è supportata quando è attivo Layer adattativi. Richiede " -"che tutti gli oggetti abbiano la stessa altezza layer." +"Pagrindinis bokštas nepalaikomas, kai įjungtas prisitaikantis sluoksnio " +"aukštis. Reikalaujama, kad visi objektai turėtų vienodą sluoksnio aukštį." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"La Prime Tower richiede che il \"gap supporto\" sia un multiplo dell'altezza " -"del layer." +"Valymo bokštui reikia, kad bet koks \"atraminis tarpas\" būtų sluoksnio " +"aukščio kartotinis." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" -"La Prime Tower richiede che tutti gli oggetti abbiano la stessa altezza " -"layer." +"Valymo bokštui reikia, kad visų objektų sluoksnio aukštis būtų vienodas." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" -"La Prime Tower richiede che tutti gli oggetti siano stampati sullo stesso " -"numero di layers del raft." +"Valymo bokštui reikia, kad visi objektai būtų spausdinami ant vienodo " +"skaičiaus platformos sluoksnių." + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Pirminis bokštas palaikomas keliems objektams tik tuo atveju, jei jie " +"spausdinami tuo pačiu atramų z aukščio atstumu." msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"La Prime Tower richiede che tutti gli oggetti siano elaborati con la stessa " -"altezza layer." +"Pirminis bokštas reikalauja, kad visi objektai būtų susluoksniuoti vienodo " +"aukščio sluoksniais." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" -"La Prime Tower è supportata solo se tutti gli oggetti hanno la stessa " -"altezza layer adattativi." +"Pagrindinis bokštas palaikomas tik tuo atveju, jei visi objektai turi tą " +"patį kintamą sluoksnio aukštį." + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Vienas ar daugiau objektų buvo priskirti ekstruderiui, kurio spausdintuvas " +"neturi." msgid "Too small line width" -msgstr "Larghezza linea troppo piccola" +msgstr "Per mažas linijos plotis" msgid "Too large line width" -msgstr "Larghezza linea troppo grande" +msgstr "Per didelis linijos plotis" + +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Spausdinti su keliais skirtingo skersmens purkštukais. Jei atrama turi būti " +"spausdinama su dabartine gija (support_filament == 0 arba " +"support_interface_filament == 0), visi purkštukai turi būti vienodo " +"skersmens." msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"La Prime Tower richiede che il supporto abbia la stessa altezza layer " -"dell'oggetto." +"Pagrindinis bokštas reikalauja, kad atramos ir objekto sluoksnio aukštis " +"būtų toks pat." msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." msgstr "" -"Il diametro della punta del supporto organico non deve essere inferiore alla " -"larghezza dell'estrusione del materiale di supporto." +"Organinio atraminio medžio viršūnės skersmuo turi būti ne mažesnis už " +"atraminės medžiagos ekstruzijos plotį." msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" -"Il diametro della ramificazione del supporto organico non deve essere minore " -"di 2 volte rispetto alla larghezza dell'estrusione del materiale di supporto." +"Organinės atraminės šakos skersmuo turi būti ne mažesnis kaip 2 kartus " +"mažesnis už atraminės medžiagos ekstruzijos plotį." msgid "" "Organic support branch diameter must not be smaller than support tree tip " "diameter." msgstr "" -"Il diametro della ramificazione organica non deve essere inferiore al " -"diametro della punta del supporto ad albero." +"Organinės atraminės šakos skersmuo neturi būti mažesnis už atraminio medžio " +"viršūnės skersmenį." msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "" -"Utilizzati supporti forzati ma i supporti non sono abilitati. Abilitare i " -"supporti." +"Naudojamos priverstinės atramos, tačiau atramų funkcija išjungta. Įjunkite " +"atramas." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "L'altezza del layer non può superare il diametro del nozzle." +msgid "Layer height cannot exceed nozzle diameter." +msgstr "Sluoksnio aukštis negali viršyti purkštuko skersmens." msgid "" "Relative extruder addressing requires resetting the extruder position at " "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" -"L'indirizzamento relativo dell'estrusore richiede la reimpostazione della " -"posizione dell'estrusore ad ogni strato per evitare la perdita di precisione " -"in virgola mobile. Aggiungi \"G92 E0\" a layer_gcode." +"Tam, kad neprarastų slankiojo kablelio tikslumo, santykinis ekstruderio " +"adresavimas reikalauja kiekviename sluoksnyje iš naujo nustatyti ekstruderio " +"padėtį. Pridėkite „G92 E0“ prie layer_gcode." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -"\"G92 E0\" trovato in before_layer_gcode, che è incompatibile con " -"l'indirizzamento assoluto dell'estrusore." +"„G92 E0“ buvo rastas before_layer_gcode, kuris nesuderinamas su absoliučiu " +"ekstruderio adresavimu." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" -"\"G92 E0\" trovato in layer_gcode, che è incompatibile con l'indirizzamento " -"assoluto dell'estrusore." +"layer_gcode buvo rastas „G92 E0“, - tai nesuderinama su absoliučiu " +"ekstruderio adresavimu." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "Piatto %d: %s non supporta il filamento %s" +msgstr "Plokštė %d: %s nepalaiko %s gijos" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" -"L'impostazione della velocità di jerk troppo bassa potrebbe causare " -"artefatti sulle superfici curve" +"Nustačius per mažą trūkčiojimo greitį, lenktuose paviršiuose gali atsirasti " +"artefaktų" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" @@ -9466,12 +11124,27 @@ msgid "" "You can adjust the maximum jerk setting in your printer's configuration to " "get higher speeds." msgstr "" -"L'impostazione del jerk supera quella massima prevista dalla stampante. " +"Nustatytas trūkčiojimas viršija didžiausią spausdintuvo trūkčiojimą " "(machine_max_jerk_x/machine_max_jerk_y).\n" -"Orca limiterà automaticamente la velocità del jerk per garantire che non " -"superi le capacità della stampante.\n" -"È possibile regolare l'impostazione di jerk massimo nella configurazione " -"della stampante per ottenere velocità più elevate." +"Orca automatiškai apribos trūkčiojimo greitį, kad jis neviršytų spausdintuvo " +"galimybių.\n" +"Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite " +"pakoreguoti didžiausio trūkčiojimo nustatymą." + +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"Sąsajos nuokrypis viršija spausdintuvo maksimalią vertę " +"(machine_max_junction_deviation).\n" +"Orca automatiškai apribos sąsajos nuokrypį, kad jis neviršytų spausdintuvo " +"galimybių.\n" +"Galite koreguoti machine_max_junction_deviation vertę spausdintuvo " +"konfigūracijoje, kad gautumėte didesnes ribas." msgid "" "The acceleration setting exceeds the printer's maximum acceleration " @@ -9481,12 +11154,12 @@ msgid "" "You can adjust the machine_max_acceleration_extruding value in your " "printer's configuration to get higher speeds." msgstr "" -"L'impostazione di accelerazione supera quella massima prevista dalla " -"stampante. (machine_max_acceleration_extruding).\n" -"Orca limiterà automaticamente la velocità di accelerazione per garantire che " -"non superi le capacità della stampante.\n" -"È possibile regolare il valore machine_max_acceleration_extruding nella " -"configurazione della stampante per ottenere velocità più elevate." +"Nustatytas pagreitis viršija maksimalų spausdintuvo pagreitį " +"(machine_max_acceleration_extruding).\n" +"Orca automatiškai apribos pagreitį, kad jis neviršytų spausdintuvo " +"galimybių.\n" +"Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite " +"pakoreguoti machine_max_acceleration_extruding reikšmę." msgid "" "The travel acceleration setting exceeds the printer's maximum travel " @@ -9496,59 +11169,78 @@ msgid "" "You can adjust the machine_max_acceleration_travel value in your printer's " "configuration to get higher speeds." msgstr "" -"The travel acceleration setting exceeds the printer's maximum travel " -"acceleration (machine_max_acceleration_travel).\n" -"Orca will automatically cap the travel acceleration speed to ensure it " -"doesn't surpass the printer's capabilities.\n" -"You can adjust the machine_max_acceleration_travel value in your printer's " -"configuration to get higher speeds." +"Judėjimo pagreičio nustatymas viršija didžiausią spausdintuvo judėjimo " +"pagreitį (machine_max_acceleration_travel).\n" +"Orca automatiškai apribos judėjimo pagreitį, kad jis neviršytų spausdintuvo " +"galimybių.\n" +"Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite " +"pakoreguoti machine_max_acceleration_travel reikšmę." + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"Tiksli sienos parinktis bus ignoruojama išorinės-vidinės arba vidinės-" +"išorinės-vidinės sienų sekose." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Gijų susitraukimas nenaudojamas, nes naudojamų gijų susitraukimas labai " +"skiriasi." msgid "Generating skirt & brim" -msgstr "Generazione skirt & brim" +msgstr "Generuojamas apvadas ir kraštas" msgid "Exporting G-code" -msgstr "Esportazione G-code" +msgstr "Eksportuojamas G-kodas" msgid "Generating G-code" -msgstr "Generazione G-code" +msgstr "Generuojamas G-kodas" msgid "Failed processing of the filename_format template." -msgstr "Processing of the filename_format template failed." +msgstr "Nepavyko apdoroti šablono filename_format." + +msgid "Printer technology" +msgstr "Spausdintuvo technologija" msgid "Printable area" -msgstr "Area di stampa" +msgstr "Spausdinama sritis" + +msgid "Extruder printable area" +msgstr "" msgid "Bed exclude area" -msgstr "Zona piano esclusa" +msgstr "Nespausdinama pagrindo sritis" msgid "" "Unprintable area in XY plane. For example, X1 Series printers use the front " "left corner to cut filament during filament change. The area is expressed as " "polygon by points in following format: \"XxY, XxY, ...\"" msgstr "" -"Area non stampabile nel piano XY. Ad esempio, le stampanti della serie X1 " -"utilizzano l'angolo anteriore sinistro per tagliare il filamento durante il " -"cambio filamento. L'area è espressa come poligono di punti nel seguente " -"formato: \"XxY, XxY, ...\"" +"Nespausdinama sritis XY plokštumoje. Pavyzdžiui, X1 serijos spausdintuvuose " +"priekinis kairysis kampas naudojamas gijai nupjauti keičiant giją. Plotas " +"išreiškiamas taškų daugiakampiu toliau nurodytu formatu: \"XxY, XxY, ...\"" msgid "Bed custom texture" -msgstr "Texture piano personalizzata" +msgstr "Pasirinktinė pagrindo tekstūra" msgid "Bed custom model" -msgstr "Modello piano personalizzato" +msgstr "Pasirinktinis pagrindo modelis" msgid "Elephant foot compensation" -msgstr "Compensazione zampa d'elefante" +msgstr "Dramblio pėdos kompensacija" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"Questo parametro restringe il primo layer sul piatto di stampa per " -"compensare l'effetto zampa d'elefante." +"Taip sutraukiamas pirmasis spausdinio sluoksnis, kad būtų kompensuotas " +"dramblio pėdos efektas." msgid "Elephant foot compensation layers" -msgstr "Layer di compensazione del piede elefante" +msgstr "Dramblio pėdos kompensavimo sluoksniai" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9556,50 +11248,54 @@ msgid "" "the next layers will be linearly shrunk less, up to the layer indicated by " "this value." msgstr "" -"Il numero di strati su cui sarà attivo la compensazione del piede degli " -"elefanti. Il primo strato verrà ridotto dal valore di compensazione del " -"piede degli elefanti, quindi gli strati successivi saranno ridotti in modo " -"linearmente ridotto, fino allo strato indicato da questo valore." +"Sluoksnių, kuriuose veiks dramblio pėdos kompensavimas, skaičius. Pirmasis " +"sluoksnis bus sumažintas pagal dramblio pėdos kompensavimo vertę, tada kiti " +"sluoksniai bus tiesiškai mažinami mažiau, iki šia verte nurodyto sluoksnio." msgid "layers" -msgstr "layer" +msgstr "sluoksniai" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" -"Indical'altezza di ogni layer. Un'altezza minore del layer implica una " -"maggiore precisione a fronte di un tempo di stampa più lungo." +"Tai kiekvieno sluoksnio aukštis. Mažesni sluoksnių aukščiai užtikrina " +"didesnį tikslumą, bet ilgesnį spausdinimo laiką." msgid "Printable height" -msgstr "Altezza di stampa" +msgstr "Spausdinamas aukštis" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "" +"Tai didžiausias spausdinamas aukštis, kurį riboja spausdinimo zonos aukštis." + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." msgstr "" -"Indica l'altezza massima stampabile, limitata dall'altezza dell'area di " -"stampa." msgid "Preferred orientation" -msgstr "Orientamento preferito" +msgstr "Pageidautina orientacija" -msgid "Automatically orient stls on the Z-axis upon initial import" -msgstr "" -"Orienta automaticamente gli stl sull'asse Z al momento dell'importazione " -"iniziale" +msgid "Automatically orient STL files on the Z axis upon initial import." +msgstr "Automatiškai orientuoti STL failus pagal Z ašį pradinio importo metu." msgid "Printer preset names" -msgstr "Nomi dei preset della stampante" +msgstr "Spausdintuvo nustatymų pavadinimai" msgid "Use 3rd-party print host" -msgstr "Utilizzare un host di stampa di terze parti" +msgstr "Naudokite trečiosios šalies spausdinimo prieglobą" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" -"Consentire il controllo della stampante di BambuLab attraverso host di " -"stampa di terze parti" +"Leidimas valdyti \"BambuLab\" spausdintuvą per trečiosios šalies spausdinimo " +"prieglobą." msgid "Hostname, IP or URL" -msgstr "Nome host, IP o URL" +msgstr "Hosto pavadinimas, IP arba URL" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " @@ -9608,400 +11304,646 @@ msgid "" "user name and password into the URL in the following format: https://" "username:password@your-octopi-address/" msgstr "" -"Snapmaker Orca può caricare file di G-code su un host di stampa. Questo campo " -"deve contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza " -"dell'host di stampa. L'host di stampa dietro HAProxy con l'autenticazione di " -"base abilitata è accessibile inserendo il nome utente e la password nell'URL " -"nel seguente formato: https://username:password@your-octopi-address/" +"\"Snapmaker Orca\" gali įkelti G-kodo failus į spausdintuvo prieglobą. Šiame " +"lauke turi būti nurodytas spausdintuvo prieglobos egzemplioriaus prieglobos " +"vardas, IP adresas arba URL. Spausdintuvo prieglobą už HAProxy su įjungta " +"pagrindine autorizacija galima pasiekti į URL įrašant naudotojo vardą ir " +"slaptažodį tokiu formatu: https://username:password@your-octopi-address/" msgid "Device UI" -msgstr "Interfaccia utente del dispositivo" +msgstr "Įrenginio sąsaja" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" -"Specificare l'URL dell'interfaccia utente del dispositivo se non corrisponde " -"a print_host" +"Nurodykite savo įrenginio naudotojo sąsajos URL, jei jis nesutampa su " +"print_host." msgid "API Key / Password" -msgstr "Chiave API / Password" +msgstr "API raktas / slaptažodis" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orca può caricare file G-code su un host di stampa. Questo campo deve " -"contenere la chiave API o la password richiesta per l'autenticazione." +"\"Snapmaker Orca\" gali įkelti G-kodo failus į spausdintuvą. Šiame lauke turėtų " +"būti nurodytas API raktas arba autentifikavimui reikalingas slaptažodis." -msgid "Name of the printer" -msgstr "Nome della stampante" +msgid "Name of the printer." +msgstr "Spausdintuvo pavadinimas." msgid "HTTPS CA File" -msgstr "File CA HTTPS" +msgstr "HTTPS CA failas" msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" -"È possibile specificare un file di certificato CA personalizzato per le " -"connessioni HTTPS di OctoPrint, in formato crt/pem. Se lasciato vuoto, viene " -"utilizzato l'archivio di certificati CA predefinito del sistema operativo." +"Pasirinktinis CA sertifikato failas gali būti nurodytas HTTPS OctoPrint " +"ryšiams crt/pem formatu. Jei paliekama tuščia, naudojama numatytoji OS CA " +"sertifikatų saugykla." msgid "User" -msgstr "Utente" +msgstr "Naudotojas" msgid "Password" -msgstr "Password" +msgstr "Slaptažodis" msgid "Ignore HTTPS certificate revocation checks" -msgstr "Ignora i controlli di revoca dei certificati HTTPS" +msgstr "Nepaisyti HTTPS sertifikato atšaukimo patikrų" msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" -"Ignora i controlli di revoca dei certificati HTTPS in caso di punti di " -"distribuzione mancanti o offline. Si potrebbe voler abilitare questa opzione " -"per i certificati autofirmati se la connessione fallisce." +"Nepaisyti HTTPS sertifikato atšaukimo patikrų, jei paskirstymo taškų trūksta " +"arba jie neprisijungę. Jei nepavyksta prisijungti, galite įjungti šią " +"parinktį savarankiškai pasirašytiems sertifikatams." -msgid "Names of presets related to the physical printer" -msgstr "Nomi dei preset relativi alla stampante" +msgid "Names of presets related to the physical printer." +msgstr "Su fiziniu spausdintuvu susijusių išankstinių nustatymų pavadinimai." msgid "Authorization Type" -msgstr "Tipo di autorizzazione" +msgstr "Autorizacijos tipas" msgid "API key" -msgstr "Chiave API" +msgstr "API raktas" msgid "HTTP digest" -msgstr "HTTP digest" +msgstr "HTTP santrauka" -msgid "Avoid crossing wall" -msgstr "Evita di attraversare le pareti" +msgid "Avoid crossing walls" +msgstr "Vengti kirsti sieną" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -"Devia ed evita di attraversare la parete che potrebbe causare la formazione " -"di blob sulla superficie." +"Apvažiuoti ir vengti važiuoti per sieną, nes dėl to ant paviršiaus gali " +"atsirasti žymė." -msgid "Avoid crossing wall - Max detour length" -msgstr "Evitare di attraversare le pareti - Lunghezza massima della deviazione" +msgid "Avoid crossing walls - Max detour length" +msgstr "Vengti kirsti sieną - Didžiausias apylankos ilgis" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Distanza massima di deviazione per evitare di attraversare la parete: la " -"stampante non eseguirà alcuna deviazione se la distanza di deviazione è " -"maggiore di questo valore. La lunghezza della deviazione può essere " -"specificata come valore assoluto o come percentuale (ad esempio 50%) di uno " -"spostamento. Un valore pari a 0 lo disabiliterà." +"Didžiausias apylankos atstumas, kad būtų išvengta sienos kirtimo: " +"Spausdintuvas neaplenks sienos, jei aplenkimo atstumas yra didesnis nei ši " +"vertė. Apylankos ilgis gali būti nurodomas kaip absoliuti vertė arba kaip " +"procentinė dalis (pvz., 50 %) nuo tiesioginio judėjimo kelio. Nustačius 0 " +"reikšmę, ši funkcija bus išjungta." msgid "mm or %" -msgstr "mm o %" +msgstr "mm arba %" msgid "Other layers" -msgstr "Altri layer" +msgstr "Kiti sluoksniai" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Cool Plate." - -msgid "°C" -msgstr "°C" +"Pagrindo temperatūra sluoksniams, išskyrus pradinį. Vertė 0 reiškia, kad " +"gija nepalaiko spausdinimo ant „Cool Plate SuperTack“." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" +"Pagrindo temperatūra po pirmojo sluoksnio. 0 reiškia, kad gija nepalaiko " +"spausdinimo ant šaltos plokštės." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Engineering." +"Sluoksnių, išskyrus pradinį, pagrindo temperatūra. Reikšmė 0 reiškia, kad " +"gija nepalaiko spausdinimo ant tekstūrinės šaltos plokštės." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto High Temp." +"Pagrindo temperatūra po pirmojo sluoksnio. 0 reiškia, kad gija nepalaiko " +"spausdinimo ant inžinerinės plokštės." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" -"Indica la temperatura del piano dopo il primo layer. Il valore 0 significa " -"che il filamento non supporta la stampa su piatto Textured PEI." +"Pagrindo temperatūra po pirmojo sluoksnio. 0 reiškia, kad gija nepalaiko " +"spausdinimo ant aukštos temperatūros plokštės." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Pagrindo temperatūra po pirmojo sluoksnio. 0 reiškia, kad gija nepalaiko " +"spausdinimo ant tekstūruotos PEI plokštės." msgid "Initial layer" -msgstr "Primo layer" +msgstr "Pradinis sluoksnis" msgid "Initial layer bed temperature" -msgstr "Temperatura del piano per il primo layer" +msgstr "Pradinė sluoksnio pagrindo temperatūra" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto Cool Plate." +"Pradinio sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad gija " +"nepalaiko spausdinimo ant šaltos plokštės „SuperTack“." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" +"Pirmojo sluoksnio temperatūra. 0 reiškia, kad gija nepalaiko spausdinimo ant " +"šaltos plokštės." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto Engineering." +"Pradinio sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad gija " +"nepalaiko spausdinimo ant tekstūruotos šaltos plokštės." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Un valore pari a 0 indica " -"che il filamento non supporta la stampa sul piatto High Temp." +"Pirmojo sluoksnio temperatūra. 0 reiškia, kad gija nepalaiko spausdinimo ant " +"inžinerinės plokštės." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -"Indica la temperatura del piano del primo layer. Il valore 0 indica che il " -"filamento non è supportato sul piatto Textured PEI." +"Pirmojo sluoksnio temperatūra. 0 reiškia, kad gija nepalaiko spausdinimo ant " +"aukštos temperatūros plokštės." -msgid "Bed types supported by the printer" -msgstr "Tipi di piatti supportati dalla stampante" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Pirmojo sluoksnio temperatūra. 0 reiškia, kad gija nepalaiko spausdinimo ant " +"tekstūruotos PEI plokštės." + +msgid "Bed types supported by the printer." +msgstr "Spausdintuvo palaikomi pagrindo tipai." msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Engineering Plate" +msgstr "Glotni vėsi plokštė" msgid "Smooth High Temp Plate" -msgstr "" +msgstr "Lygi aukštos temperatūros plokštė" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "Numatytasis pagrindo tipas" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" +"Numatytasis spausdintuvo pagrindo tipas (palaiko tiek skaitmenų, tiek " +"simbolių formatą)." msgid "First layer print sequence" -msgstr "Sequenza di stampa del primo strato" +msgstr "Pirmojo sluoksnio spausdinimo seka" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "Kitų sluoksnių spausdinimo seka" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "Sluoksnių skaičiaus spausdinimo seka" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "Kitų sluoksnių gijų seka" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" -"Questo G-code viene inserito ad ogni cambio layer prima del sollevamento z." +"Šis G-kodas įterpiamas kiekvieną kartą keičiant sluoksnį prieš pakeliant z." msgid "Bottom shell layers" -msgstr "Layer guscio inferiore" +msgstr "Apatiniai sluoksniai" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" -"Rappresenta il numero di layer solidi del guscio inferiore, incluso quello " -"della superficie inferiore. Se lo spessore calcolato da questo valore è più " -"sottile dello spessore del guscio inferiore, i layer del guscio inferiore " -"verranno aumentati." +"Tai yra apatinio korpuso vientisų sluoksnių skaičius, įskaitant apatinį " +"paviršiaus sluoksnį. Kai pagal šią reikšmę apskaičiuotas storis yra " +"plonesnis už apatinio apvalkalo storį, apatinio apvalkalo sluoksniai bus " +"padidinti." msgid "Bottom shell thickness" -msgstr "Spessore del guscio inferiore" +msgstr "Apatinio apvalkalo storis" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" -"Il numero di layers solidi inferiori aumenta durante l'elaborazione se lo " -"spessore calcolato dei layers del guscio inferiore è più sottile di questo " -"valore. Questo può evitare di avere un guscio troppo sottile quando " -"l'altezza layer è ridotta. 0 significa che questa impostazione è " -"disabilitata e lo spessore del guscio inferiore è determinato semplicemente " -"dal numero di layers del guscio inferiore." +"Pjaustant didinamas apatinių vientisų sluoksnių skaičius, jei pagal " +"apatinius apvalkalo sluoksnius apskaičiuotas storis yra plonesnis už šią " +"vertę. Taip galima išvengti per plono apvalkalo, kai sluoksnių aukštis yra " +"mažas. 0 reiškia, kad šis nustatymas išjungtas ir apatinio apvalkalo storis " +"visiškai nustatomas pagal apatinio apvalkalo sluoksnius." msgid "Apply gap fill" -msgstr "Applicare il riempimento degli spazi vuoti" +msgstr "Taikyti tarpų užpildymą" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" -msgstr "" -"Abilita il riempimento degli spazi vuoti per le superfici selezionate. La " -"lunghezza minima degli spazi vuoti che verranno riempiti può essere " -"controllata dall'opzione Filtra piccoli spazi vuoti di seguito.\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" -"Opzioni:\n" -"1. Ovunque: applica il riempimento degli spazi vuoti alle superfici solide " -"superiori, inferiori e interne\n" -"2. Superfici superiore e inferiore: applica il riempimento degli spazi vuoti " -"solo alle superfici superiore e inferiore\n" -"3. Da nessuna parte: disabilita il riempimento degli spazi vuoti\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." +msgstr "" +"Įjungiamas pasirinktų vientisų paviršių tarpų užpildymas. Mažiausias " +"užpildomo tarpo ilgis gali būti kontroliuojamas naudojant toliau esančią " +"mažų tarpų filtravimo parinktį.\n" +"\n" +"Parinktys:\n" +"1. Visur: Taikomas tarpo užpildymas viršutiniam, apatiniam ir vidiniam " +"vientisam paviršiui, kad jis būtų maksimaliai tvirtas.\n" +"2. Viršutinis ir apatinis paviršiai: Užpildomi tik viršutiniai ir apatiniai " +"paviršiai, taip subalansuojant spausdinimo greitį, sumažinant galimą " +"vientisų užpildų perteklinį išspaudimą ir užtikrinant, kad viršutiniuose ir " +"apatiniuose paviršiuose nebūtų skylučių tarpų.\n" +"3. Niekur: Išjungiamas tarpų užpildymas visuose vientiso užpildo plotuose.\n" +"\n" +"Atkreipkite dėmesį, kad jei naudojamas klasikinis perimetro generatorius, " +"tarpų užpildymas gali būti generuojamas ir tarp perimetrų, jei tarp jų " +"netelpa viso pločio linija. Šis nustatymas tokio perimetro tarpo užpildymo " +"nekontroliuoja.\n" +"\n" +"Jei norite, kad visi tarpų užpildymai, įskaitant klasikinio perimetro " +"generuojamą tarpą, būtų pašalinti, nustatykite mažų tarpų filtravimo reikšmę " +"dideliu skaičiumi, pavyzdžiui, 999999.\n" +"\n" +"Tačiau to daryti nerekomenduojama, nes tarpų tarp perimetrų užpildymas " +"prisideda prie modelio tvirtumo. Modeliuose, kuriuose tarp perimetrų " +"generuojamas per didelis tarpų užpildas, geresnis variantas būtų pereiti " +"prie arachnės sienų generatoriaus ir šia parinktimi valdyti, ar generuojamas " +"kosmetinis viršutinio ir apatinio paviršiaus tarpų užpildas." msgid "Everywhere" -msgstr "Ovunque" +msgstr "Visur" msgid "Top and bottom surfaces" -msgstr "Superfici superiore e inferiore" +msgstr "Viršutinis ir apatinis paviršiai" msgid "Nowhere" -msgstr "Da nessuna parte" +msgstr "Niekur" -msgid "Force cooling for overhang and bridge" -msgstr "Forzare il raffreddamento per sbalzi e ponti" +msgid "Force cooling for overhangs and bridges" +msgstr "Iškyšų ir tiltų priverstinis aušinimas" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Abilita questa opzione per ottimizzare la velocità della ventola di " -"raffreddamento degli oggetti per sporgenze e ponti per ottenere un " -"raffreddamento migliore." +"Įjunkite šią parinktį, kad būtų galima reguliuoti detalės aušinimo " +"ventiliatoriaus greitį specialiai iškyšoms, vidiniams ir išoriniams " +"tilteliams. Nustatant ventiliatoriaus greitį specialiai šiems elementams, " +"galima pagerinti bendrą spausdinimo kokybę ir sumažinti deformacijas." -msgid "Fan speed for overhang" -msgstr "Velocità della ventola per le sporgenze" +msgid "Overhangs and external bridges fan speed" +msgstr "Ventiliatoriaus greitis iškyšose ir išoriniuose tiltuose" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Force part cooling fan to be this speed when printing bridges or overhang " -"walls which have a large overhang degree. Forcing cooling for overhangs and " -"bridges can achieve better quality for these parts." +"Šį dalies aušinimo ventiliatoriaus greitį naudokite spausdindami tiltus arba " +"iškyšas, kurių iškyšų slenkstis viršija pirmiau nustatyto parametro „Iškyšų " +"aušinimo slenkstis“ vertę. Padidinus specialiai iškyšoms ir tilteliams " +"skirtą aušinimą, gali pagerėti bendra šių elementų spausdinimo kokybė.\n" +"\n" +"Atkreipkite dėmesį, kad šis ventiliatoriaus greitis yra ribojamas apatinėje " +"dalyje pagal pirmiau nustatytą mažiausią ventiliatoriaus greičio ribą. Jis " +"taip pat reguliuojamas aukštyn iki didžiausios ventiliatoriaus greičio " +"ribos, kai nepasiekiama minimali sluoksnio trukmės riba." -msgid "Cooling overhang threshold" -msgstr "Soglia di sbalzo per il raffreddamento" +msgid "Overhang cooling activation threshold" +msgstr "Iškyšos vėsinimo aktyvavimo riba" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Forza la ventola di raffreddamento a una velocità specifica quando il grado " -"di sporgenza della parte stampata supera questo valore. Questo valore è " -"espresso in percentuale e indica la larghezza della linea senza il supporto " -"dei layer. 0%% significa forzare il raffreddamento per tutta la parete " -"esterna, indipendentemente dal grado di sporgenza." +"Kai iškyša viršija šią nustatytą ribą, priverskite aušinimo ventiliatorių " +"veikti toliau nustatytu „Iškyšos ventiliatoriaus greičiu“. Ši riba " +"išreiškiama procentais, nurodant kiekvienos linijos pločio dalį, kurios " +"nepalaiko po ja esantis sluoksnis. Nustačius šią reikšmę 0 %, aušinimo " +"ventiliatorius priverstas veikti visoms išorinėms sienoms, nepriklausomai " +"nuo iškyšos laipsnio." -msgid "Bridge infill direction" -msgstr "Direzione di riempimento del ponte" +msgid "External bridge infill direction" +msgstr "Išorinio tilto užpildymo kryptis" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -"Sovrascrivere l'angolo del Bridge. Il valore 0 significa che l'angolo di " -"collegamento verrà calcolato automaticamente. Altrimenti l'angolo fornito " -"verrà utilizzato per i Bridge esterni. Usa 180° per un angolo zero." +"Tilto kampo panaikinimas. Jei paliekama nulinė reikšmė, tilto kampas " +"apskaičiuojamas automatiškai. Priešingu atveju išoriniams tilteliams bus " +"naudojamas pateiktas kampas. Nuliniam kampui naudokite 180°." -msgid "Bridge density" -msgstr "Densità del bridge" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" -"Densità di ponti esterni. 100% significa solido ponte. L'impostazione " -"predefinita è al 100%." - -msgid "Bridge flow ratio" -msgstr "Flusso del Bridge" +msgid "Internal bridge infill direction" +msgstr "Vidinio tilto užpildymo kryptis" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Diminuire leggermente questo valore (ad esempio 0.9) per ridurre la quantità " -"di materiale per il ponte e migliorare l'abbassamento dello stesso" +"Vidinio pertvaros kampo panaikinimas. Jei paliekama nulinė reikšmė, tilto " +"kampas apskaičiuojamas automatiškai. Priešingu atveju vidiniams tiltams bus " +"naudojamas nurodytas kampas. Naudokite 180°, kad kampas būtų lygus nuliui.\n" +"\n" +"Rekomenduojama palikti 0, nebent yra konkretus modelio poreikis to nedaryti." + +msgid "External bridge density" +msgstr "Išorinio tilto tankis" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Valdo išorinių tiltelių linijų tankį (atstumus). 100 % reiškia vientisą " +"tiltą. Numatytoji reikšmė yra 100 %.\n" +"\n" +"Mažesnio tankio išoriniai tilteliai gali padėti padidinti patikimumą, nes " +"aplink išspaustą tiltelį cirkuliuoja daugiau vietos orui, todėl pagerėja jo " +"aušinimo greitis." + +msgid "Internal bridge density" +msgstr "Vidinių tiltų tankis" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Valdo vidinių tiltelių linijų tankį (atstumus). 100 % reiškia vientisą " +"tiltą. Numatytoji reikšmė yra 100 %.\n" +"\n" +" Mažesnio tankio vidiniai tilteliai gali padėti sumažinti viršutinio " +"paviršiaus iškilimą ir padidinti vidinio tiltelio patikimumą, nes aplink " +"išspaustą tiltelį cirkuliuoja daugiau erdvės orui, todėl pagerėja jo " +"aušinimo greitis.\n" +"\n" +"Ši parinktis ypač gerai veikia kartu su antrojo vidinio tiltelio virš " +"užpildo parinktimi, dar labiau pagerinančia vidinio tiltelio struktūrą prieš " +"išspaudžiant kietąjį užpildą." + +msgid "Bridge flow ratio" +msgstr "Tilto srauto santykis" + +msgid "" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Šiek tiek sumažinkite šią reikšmę (pvz., 0,9), kad sumažintumėte tilto " +"medžiagos kiekį ir pagerintumėte įlinkį.\n" +"\n" +"Faktinis tiltelio srautas apskaičiuojamas padauginus šią reikšmę iš gijos " +"srauto santykio ir, jei nustatyta, objekto srauto santykio." msgid "Internal bridge flow ratio" -msgstr "Rapporto Flusso del bridge interno" +msgstr "Vidinio tilto srauto koeficientas" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"Questo valore governa lo spessore dello strato del bridge interno. Questo è " -"il primo strato sopra il riempimento. Riduci leggermente questo valore (ad " -"esempio 0.9) per migliorare la qualità della superficie sopra il riempimento." +"Ši vertė lemia vidinio tilto sluoksnio storį. Tai yra pirmasis sluoksnis " +"virš reto užpildo. Šiek tiek sumažinkite šią reikšmę (pavyzdžiui, 0,9), kad " +"pagerintumėte paviršiaus kokybę virš reto užpildo.\n" +"\n" +"Faktinis naudojamas vidinio tiltelio srautas apskaičiuojamas padauginus šią " +"vertę iš tiltelio srauto santykio, gijų srauto santykio ir, jei nustatyta, " +"objekto srauto santykio." msgid "Top surface flow ratio" -msgstr "Rapporto di portata superficiale superiore" +msgstr "Viršutinio paviršiaus srauto koeficientas" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Questo fattore influisce sulla quantità di materiale per il riempimento " -"solido superiore. Puoi diminuirlo leggermente per avere una finitura " -"superficiale liscia" +"Šis veiksnys turi įtakos viršutinio vientiso užpildo medžiagos kiekiui. " +"Galite jį šiek tiek sumažinti, kad paviršius būtų lygus.\n" +"\n" +"Faktinis naudojamas viršutinio paviršiaus srautas apskaičiuojamas padauginus " +"šią reikšmę iš gijų srauto koeficiento ir, jei nustatyta, iš objekto srauto " +"koeficiento." msgid "Bottom surface flow ratio" -msgstr "Rapporto di flusso della superficie inferiore" +msgstr "Dugno paviršiaus srauto koeficientas" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Šis veiksnys turi įtakos medžiagos vientiso dugno užpildo kiekiui.\n" +"\n" +"Faktinis apatinio vientiso užpildo srautas apskaičiuojamas padauginus šią " +"vertę iš gijų srauto koeficiento ir, jei nustatyta, iš objekto srauto " +"koeficiento." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Questo fattore influisce sulla quantità di materiale per il riempimento " -"solido inferiore" msgid "Precise wall" -msgstr "Parete precisa" +msgstr "Tiksli siena" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Migliora la precisione del guscio regolando lo spaziamento della parete " -"esterna. Ciò migliora anche la coerenza dello strato.\n" -"Nota: Questa impostazione avrà effetto solo se la sequenza della parete è " -"configurata su Interno-Esterno." +"Pagerinkite apvalkalo tikslumą, reguliuodami išorinės sienos tarpą. Tai taip " +"pat pagerina sluoksnių nuoseklumą. PASTABA: Ši parinktis bus ignoruojama " +"išorinės-vidinės arba vidinės-išorinės-vidinės sienos sekose." msgid "Only one wall on top surfaces" -msgstr "Solo una parete sulle superfici superiori" +msgstr "Tik viena viršutinių paviršių siena" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" -"Usa solo una parete su superfici piane, per dare più spazio alla trama " -"riempimento superiore" +"Ant lygaus viršutinio paviršiaus naudokite tik vieną sienelę, kad būtų " +"daugiau vietos viršutiniam užpildymo raštui." msgid "One wall threshold" -msgstr "Soglia a una parete" +msgstr "Vienos sienos riba" #, no-c-format, no-boost-format msgid "" @@ -10014,62 +11956,61 @@ msgid "" "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" -"Se una superficie superiore deve essere stampata ed è parzialmente coperta " -"da un altro strato, non verrà considerata in un livello superiore in cui la " -"sua larghezza è inferiore a questo valore. Questo può essere utile per non " -"lasciare che il \"un perimetro in cima\" si attivi su una superficie che " -"dovrebbe essere coperta solo da perimetri. Questo valore può essere un mm o " -"un % of della larghezza di estrusione del perimetro.\n" -"Attenzione: se abilitato, è possibile creare artefatti se si hanno alcune " -"caratteristiche sottili sul livello successivo, come le lettere. Impostare " -"questa impostazione su 0 per rimuovere questi artefatti." +"Jei viršutinį paviršių reikia atspausdinti ir jį iš dalies dengia kitas " +"sluoksnis, jis nebus laikomas viršutiniu sluoksniu, jei jo plotis yra " +"mažesnis už šią reikšmę. Tai gali būti naudinga norint, kad nebūtų įjungta " +"funkcija \"vienas perimetras viršuje\" ant paviršiaus, kurį turėtų dengti " +"tik perimetrai. Ši vertė gali būti mm arba % perimetro išspaudimo pločio.\n" +"Įspėjimas: Jei ši funkcija įjungta, gali atsirasti artefaktų, jei kitame " +"sluoksnyje yra plonų elementų, pavyzdžiui, raidžių. Nustatykite šią nuostatą " +"į 0, kad šie artefaktai būtų pašalinti." msgid "Only one wall on first layer" -msgstr "Solo un perimetro sul primo layer" +msgstr "Tik viena pirmojo sluoksnio siena" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" -"Utilizzare un solo muro sul primo strato, per dare più spazio al modello di " -"riempimento inferiore" +"Pirmajame sluoksnyje naudokite tik vieną sienelę, kad būtų daugiau vietos " +"apatiniam užpildymo raštui." msgid "Extra perimeters on overhangs" -msgstr "Perimetri aggiuntivi sulle sporgenze (sperimentale)" +msgstr "Papildomi iškyšų perimetrai" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Creare percorsi perimetrali aggiuntivi su strapiombi ripidi e aree in cui i " -"ponti non possono essere ancorati. " +"Sukurti papildomus perimetrinius takus per stačias iškyšas ir vietas, " +"kuriose negalima įtvirtinti tiltų." -msgid "Reverse on odd" -msgstr "Retromarcia su dispari" +msgid "Reverse on even" +msgstr "Atvirkštinis judėjimas lyginis" msgid "Overhang reversal" -msgstr "Inversione di sbalzo" +msgstr "Iškyšos apvertimas" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Estrudere i perimetri che hanno una parte su una sporgenza in direzione " -"inversa su layer dispari. Questo schema alternato può migliorare " -"drasticamente gli strapiombi ripidi.\n" +"Perimetrus, kurių dalis yra virš iškyšos, ekstruzijuokite atvirkštine " +"kryptimi lygiuose sluoksniuose. Šis kaitaliojamasis modelis gali smarkiai " +"pagerinti stačias iškyšas.\n" "\n" -"Questa impostazione può anche contribuire a ridurre la deformazione della " -"parte grazie alla riduzione delle sollecitazioni nelle pareti della parte." +"Šis nustatymas taip pat gali padėti sumažinti detalės deformaciją dėl " +"sumažėjusių įtempių detalės sienelėse." msgid "Reverse only internal perimeters" -msgstr "Inversione solo perimetri interni" +msgstr "Atvirkštinis tik vidinis perimetras" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10078,415 +12019,521 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Applicare la logica dei perimetri inversi solo ai perimetri interni. \n" +"Atvirkštinių perimetrų logiką taikykite tik vidiniams perimetrams.\n" "\n" -"Questa impostazione riduce notevolmente le sollecitazioni delle parti poiché " -"ora sono distribuite in direzioni alternate. Ciò dovrebbe ridurre la " -"deformazione delle parti mantenendo al contempo la qualità delle pareti " -"esterne. Questa caratteristica può essere molto utile per materiali soggetti " -"a deformazione, come ABS/ASA, e anche per filamenti elastici, come TPU e " -"Silk PLA. Può anche aiutare a ridurre la deformazione sulle regioni " -"fluttuanti sui supporti.\n" +"Šis nustatymas labai sumažina detalių įtempius, nes dabar jie pasiskirsto " +"pakaitinėmis kryptimis. Tai turėtų sumažinti detalės deformacijas, kartu " +"išlaikant išorinių sienelių kokybę. Ši funkcija gali būti labai naudinga į " +"deformacijas linkusioms medžiagoms, pavyzdžiui, ABS/ASA, taip pat " +"elastingoms gijoms, pavyzdžiui, TPU ir šilko PLA. Ji taip pat gali padėti " +"sumažinti plūduriuojančių sričių virš atramų deformacijas.\n" "\n" -"Affinché questa impostazione sia la più efficace, si consiglia di impostare " -"la soglia inversa su 0 in modo che tutte le pareti interne vengano stampate " -"in direzioni alternate sugli strati dispari, indipendentemente dal loro " -"grado di sporgenza." +"Kad šis nustatymas būtų veiksmingiausias, rekomenduojama nustatyti " +"atvirkštinio slenksčio reikšmę 0, kad visos vidinės sienelės būtų " +"spausdinamos pakaitinėmis kryptimis lygiuose sluoksniuose, neatsižvelgiant į " +"jų išsikišimo laipsnį." msgid "Bridge counterbore holes" -msgstr "Fori per controbolo del ponte" +msgstr "Tilto priešpriešinės skylės" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" -"Questa opzione consente di creare ponti per i fori di lamatura, " -"consentendone la stampa senza supporto. Le modalità disponibili includono:\n" -"1. Nessuno: non viene creato alcun bridge.\n" -"2. Parzialmente collegato: solo una parte dell'area non supportata verrà " -"colmata.\n" -"3. Strato sacrificale: viene creato un livello ponte sacrificale completo." +"Šia parinktimi sukuriami tilteliai priešpriešinėms skylėms, todėl jas galima " +"spausdinti be atramos. Galimi šie režimai:\n" +"1. Nėra: Nesukuriamas joks tiltelis.\n" +"2. Iš dalies sujungtas tiltas: Tik dalis nepalaikomos srities bus sujungta " +"tiltu.\n" +"3. Apsauginis sluoksnis: Sukuriamas visas paviršinis tilto sluoksnis" msgid "Partially bridged" -msgstr "Parzialmente ponticellato" +msgstr "Iš dalies sujungtas tiltu" msgid "Sacrificial layer" -msgstr "Strato sacrificale" +msgstr "Apsauginis sluoksnis" msgid "Reverse threshold" -msgstr "Soglia inversa" +msgstr "Atvirkštinis slenkstis" msgid "Overhang reversal threshold" -msgstr "Soglia di inversione a sbalzo" +msgstr "Iškyšos apvertimo slenkstis" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Numero di mm di sbalzo necessario affinché l'inversione sia considerata " -"utile. Può essere un % o della larghezza del perimetro.\n" -"Il valore 0 abilita l'inversione su tutti i livelli dispari a prescindere." - -msgid "Classic mode" -msgstr "Modalità classica" - -msgid "Enable this option to use classic mode" -msgstr "Abilita questa opzione per utilizzare la modalità classica" +"Kiek mm turi būti iškyša, kad būtų galima laikyti, jog apvertimas yra " +"naudingas. Gali būti perimetro pločio %.\n" +"Reikšmė 0 įjungia apvertimą kiekviename lyginiame sluoksnyje " +"nepriklausomai.\n" +"Kai aptikti iškyšos sienelę neįjungta, ši parinktis ignoruojama ir " +"apvertimas atliekamas nepriklausomai nuo kiekvieno lyginio sluoksnio." msgid "Slow down for overhang" -msgstr "Rallenta in caso di sporgenze" +msgstr "Sulėtinti greitį dėl iškyšų" -msgid "Enable this option to slow printing down for different overhang degree" -msgstr "" -"Abilita questa opzione per rallentare quando la stampa presenta sporgenze. " -"Le velocità per le diverse percentuali di sporgenza sono indicate di seguito." +msgid "Enable this option to slow printing down for different overhang degree." +msgstr "Įjunkite šią parinktį, kad spausdinant iškyšas sulėtėtų spausdinimas." msgid "Slow down for curled perimeters" -msgstr "Rallenta per perimetri arricciati" +msgstr "Sulėtinti greitį, jei perimetras yra vingiuotas" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Attivare questa opzione per rallentare la stampa nelle aree in cui possono " -"esistere potenziali perimetri arricciati" +"Įjunkite šią parinktį, kad sulėtintumėte spausdinimą tose srityse, kuriose " +"perimetras gali būti išlinkęs į viršų. Pavyzdžiui, papildomas sulėtinimas " +"bus taikomas spausdinant iškyšas ant aštrių kampų, pavyzdžiui, „Benchy“ " +"korpuso priekyje, sumažinant susisukimą, kuris susidaro per kelis " +"sluoksnius.\n" +"\n" +" Paprastai rekomenduojama įjungti šią parinktį, nebent jūsų spausdintuvo " +"aušinimas yra pakankamai galingas arba spausdinimo greitis pakankamai lėtas, " +"kad perimetro susisukimas neįvyktų. Jei spausdinama dideliu išoriniu " +"perimetro greičiu, šis parametras gali sukelti nedidelius artefaktus, kai " +"sulėtėja dėl didelio spausdinimo greičio skirtumo. Jei pastebėsite " +"artefaktus, įsitikinkite, kad išankstinis slėgis sureguliuotas teisingai.\n" +"\n" +"Pastaba: Kai ši parinktis įjungta, iškyšos perimetras traktuojamas kaip " +"iškyša, t. y. iškyšos greitis taikomas net jei iškyšos perimetras yra tilto " +"dalis. Pavyzdžiui, kai perimetrai yra 100 % išsikišę, o iš apačios jų " +"nepalaiko jokia siena, bus taikomas 100 % išsikišimo greitis." msgid "mm/s or %" -msgstr "mm/s o %" - -msgid "External" -msgstr "Esterno" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Indica la velocità per i bridge e le pareti completamente a sbalzo." - -msgid "mm/s" -msgstr "mm/s" - -msgid "Internal" -msgstr "Interno" +msgstr "mm/s arba %" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" -"Velocità del ponte interno. Se il valore è espresso in percentuale, verrà " -"calcolato in base al bridge_speed. Il valore predefinito è 150%." +"Išoriškai matomų tilto išspaudų greitis.\n" +"\n" +"Be to, jei išjungta funkcija Lėtinimas lenktiems perimetrams arba įjungtas " +"klasikinis iškyšų režimas, tai bus spausdinimo greitis iškyšų sienelėms, " +"kurių atramos yra mažesnės nei 13 %, nepriklausomai nuo to, ar jos yra " +"tilto, ar iškyšos dalis." + +msgid "Internal" +msgstr "Vidinis" + +msgid "" +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." +msgstr "" +"Vidinių tiltų greitis. Jei reikšmė išreiškiama procentais, ji bus " +"apskaičiuojama pagal bridge_speed. Numatytoji vertė yra 150 %." msgid "Brim width" -msgstr "Larghezza brim" +msgstr "Krašto plotis" -msgid "Distance from model to the outermost brim line" -msgstr "Questa è la distanza tra il modello e la linea del brim più esterno." +msgid "Distance from model to the outermost brim line." +msgstr "Atstumas nuo modelio iki išorinės krašto linijos." msgid "Brim type" -msgstr "Tipo di brim" +msgstr "Krašto tipas" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"Questo controlla la generazione del brim esterno e/o interno dei modelli. " -"Auto significa che la larghezza del brim viene analizzata e calcolata " -"automaticamente." +"Taip reguliuojamas modelių išorinės ir (arba) vidinės pusės krašto " +"formavimas. Automatinis reiškia, kad apvado plotis analizuojamas ir " +"apskaičiuojamas automatiškai." msgid "Brim-object gap" -msgstr "Distanza Brim-Oggetto " +msgstr "Tarpas tarp krašto ir objekto" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"Questo crea un gap tra la linea interna del brim e l'oggetto per rendere il " -"brim più facile da rimuovere" +"Sukuriamas tarpas tarp vidinės krašto linijos ir objekto, todėl galima " +"lengviau jį atskirti." msgid "Brim ears" -msgstr "Brim a Orecchie" +msgstr "Krašto \"ausys\"" msgid "Only draw brim over the sharp edges of the model." -msgstr "Disegna il brim solo sugli spigoli vivi del modello." +msgstr "Generuoti kraštą tik aplink aštrius modelio kraštus." msgid "Brim ear max angle" -msgstr "Angolo massimo del Brim a Orecchie" +msgstr "Maksimalus krašto \"ausies \" kampas" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Angolo massimo per far apparire un Brim a orecchie \n" -"Se impostato su 0, non verrà creato alcun Brim. \n" -"Se impostato su ~180, il brim verrà creato su tutto tranne che sulle sezioni " -"diritte." +"Didžiausias kampas, kad atsirastų ausies kraštas.\n" +"Jei nustatyta 0, kraštas nebus sukurtas.\n" +"Jei nustatyta ~ 180, apvadas bus kuriamas visuose, išskyrus tiesias atkarpas." msgid "Brim ear detection radius" -msgstr "Raggio di rilevamento del Brim a Orecchie" +msgstr "Kraštų ausies aptikimo spindulys" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -"La geometria verrà decimata prima di rilevare gli angoli acuti. Questo " -"parametro indica la lunghezza minima dello scostamento per la decimazione.\n" -"0 per disattivare" +"Prieš aptikdami aštrius kampus, geometrija bus išskaidyta. Šis parametras " +"nurodo mažiausią nuokrypio ilgį decimavimui.\n" +"0 - išjungti." -msgid "Compatible machine" -msgstr "Macchina compatibile" +msgid "Select printers" +msgstr "Pasirinkite spausdintuvus" msgid "upward compatible machine" -msgstr "macchina compatibile con versioni successive" +msgstr "į viršų suderinamas įrenginys" -msgid "Compatible machine condition" -msgstr "Condizione della macchina compatibile" +msgid "Condition" +msgstr "Sąlyga" -msgid "Compatible process profiles" -msgstr "Profili di processo compatibili" - -msgid "Compatible process profiles condition" -msgstr "Condizione dei profili di processo compatibili" - -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." msgstr "" -"Questo determina la sequenza di stampa, che consente di stampare layer per " -"layer o oggetto per oggetto." +"Loginė išraiška, kurioje naudojamos aktyvaus spausdintuvo profilio " +"konfigūracijos vertės. Jei ši išraiška yra \"tiesa\", šis profilis laikomas " +"suderinamu su aktyviu spausdintuvo profiliu." + +msgid "Select profiles" +msgstr "Pasirinkite profilius" + +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Loginė išraiška, kurioje naudojamos aktyvaus spausdinimo profilio " +"konfigūracijos reikšmės. Jei ši išraiška lygi „tiesa“, šis profilis laikomas " +"suderinamu su aktyviuoju spausdinimo profiliu." + +msgid "Print sequence, layer by layer or object by object." +msgstr "" +"Spausdinimo seka, leidžianti spausdinti sluoksnį po sluoksnio arba objektą " +"po objekto." msgid "By layer" -msgstr "Per layer" +msgstr "Pagal sluoksnį" msgid "By object" -msgstr "Per oggetto" +msgstr "Pagal objektą" msgid "Intra-layer order" -msgstr "Ordine intra-layer" +msgstr "Vidinė sluoksnių tvarka" -msgid "Print order within a single layer" -msgstr "Ordine di stampa all'interno di un singolo livello" +msgid "Print order within a single layer." +msgstr "Spausdinimo eiliškumas viename sluoksnyje." msgid "As object list" -msgstr "Come elenco di oggetti" +msgstr "Kaip objektų sąrašas" msgid "Slow printing down for better layer cooling" -msgstr "Rallenta stampa per un migliore raffreddamento layers" +msgstr "Sulėtinti spausdinimą, kad geriau būtų aušinami sluoksniai" msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" -"Abilita questa opzione per rallentare la velocità di stampa in modo che il " -"tempo finale del layer non sia inferiore alla soglia di tempo nel valore " -"\"Soglia di velocità massima della ventola\", in modo che il layer possa " -"essere raffreddato più a lungo.\n" -"Ciò può migliorare la qualità per i piccoli dettagli" +"Įjunkite šią parinktį, jei norite sulėtinti spausdinimo greitį, kad galutinė " +"sluoksnio trukmė nebūtų trumpesnė už maksimalaus ventiliatoriaus greičio " +"slenkstičio nustatytą sluoksnio trukmės ribą, kad sluoksnį būtų galima " +"aušinti ilgiau. Tai gali pagerinti smulkių detalių kokybę." msgid "Normal printing" -msgstr "Stampa normale" +msgstr "Įprastas spausdinimas" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" -"Indica l'accelerazione predefinita sia per la stampa normale che per la " -"corsa dopo il primo layer." - -msgid "mm/s²" -msgstr "mm/s²" +"Tai numatytasis pagreitis tiek įprastam spausdinimui, tiek judėjimui po " +"pirmojo sluoksnio." msgid "Default filament profile" -msgstr "Profilo filamento predefinito" +msgstr "Numatytasis gijų profilis" -msgid "Default filament profile when switch to this machine profile" -msgstr "" -"Profilo filamento predefinito quando si passa a questo profilo macchina" +msgid "Default filament profile when switching to this machine profile." +msgstr "Numatytasis gijos profilis, kai pereinama prie šio įrenginio profilio." msgid "Default process profile" -msgstr "Profilo di processo predefinito" +msgstr "Numatytasis proceso profilis" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "" -"Profilo di processo predefinito quando si passa a questo profilo macchina" +"Numatytasis proceso profilis, kai pereinama prie šio įrenginio profilio." msgid "Activate air filtration" -msgstr "Attivare la filtrazione dell'aria" +msgstr "Įjungti oro filtravimą" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" -"Attivare per una migliore filtrazione dell'aria. Comando G-code: M106 P3 " -"S(0-255)" +"Suaktyvinkite, kad geriau filtruotumėte orą. G-kodo komanda: M106 P3 S(0-255)" msgid "Fan speed" -msgstr "Velocità ventola" +msgstr "Ventiliatoriaus greitis" +#, fuzzy msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" -"Velocità della ventola di scarico durante la stampa. Questa velocità " -"sovrascriverà la velocità nel gcode personalizzato del filamento" +"Ištraukimo ventiliatoriaus greitis spausdinimo metu. Šis greitis bus " +"viršesnis už greitį, nurodytą gijos pasirinktiniame G-kodo." -msgid "Speed of exhaust fan after printing completes" -msgstr "Velocità della ventola di estrazione al termine della stampa" +msgid "Speed of exhaust fan after printing completes." +msgstr "Ištraukimo ventiliatoriaus greitis baigus spausdinti." msgid "No cooling for the first" -msgstr "Nessun raffreddamento per il primo" +msgstr "Nėra aušinimo pirmiesiems" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"Spegnere tutte le ventole di raffreddamento per i primi layer. Questo può " -"servire a migliorare l'adesione del piatto di stampa." +"Pirmiesiems sluoksniams išjungti visus aušinimo ventiliatorius. Tai gali " +"būti naudojama siekiant pagerinti sluoksnio sukibimą." msgid "Don't support bridges" -msgstr "Non supportare i bridge" +msgstr "Nekurti atramų tiltams" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" -"This disables supporting bridges, which decreases the amount of support " -"required. Bridges can usually be printed directly without support over a " -"reasonable distance." +"Taip išjungiami atraminiai tilteliai, todėl sumažėja reikalingų atramų " +"kiekis. Tiltus paprastai galima spausdinti tiesiogiai be atramų priimtinu " +"atstumu." -msgid "Thick bridges" -msgstr "Bridge spessi" +msgid "Thick external bridges" +msgstr "Stori vidiniai tiltai" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" -"Se abilitato, i bridge sono più affidabili e possono colmare distanze " -"maggiori, ma potrebbero avere un aspetto peggiore. Se disattivato, avrannoun " -"aspetto migliore ma sono affidabili solo per le distanze ridotte." +"Jei įjungta, tiltai yra patikimesni, gali įveikti didesnius atstumus, tačiau " +"gali atrodyti blogiau. Jei išjungta, tiltai atrodo geriau, bet yra patikimi " +"tik trumpesniems atstumams." msgid "Thick internal bridges" -msgstr "Bridge interni spessi" +msgstr "Stori vidiniai tiltai" msgid "" "If enabled, thick internal bridges will be used. It's usually recommended to " "have this feature turned on. However, consider turning it off if you are " "using large nozzles." msgstr "" -"Se abilitato, verranno utilizzati bridge interni spessi. Di solito si " -"consiglia di attivare questa funzione. Tuttavia, considera di disattivarlo " -"se stai utilizzando ugelli di grandi dimensioni." +"Jei įjungta, bus naudojami stori vidiniai tiltai. Paprastai rekomenduojama " +"šią funkciją įjungti. Tačiau jei naudojate didelius antgalius, apsvarstykite " +"galimybę ją išjungti." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Non filtrare i piccoli ponti interni (beta)" +msgid "Extra bridge layers (beta)" +msgstr "Papildomi tilto sluoksniai (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" +"Ši parinktis leidžia sukurti papildomą tilto sluoksnį virš vidinių ir (arba) " +"išorinių tiltų.\n" +"\n" +"Papildomi tiltų sluoksniai padeda pagerinti tiltų išvaizdą ir patikimumą, " +"nes kietasis užpildas geriau atremiamas. Tai ypač naudinga greituosiuose " +"spausdintuvuose, kuriuose tilto ir kietojo užpildo greitis labai skiriasi. " +"Dėl papildomo tiltelio sluoksnio sumažėja viršutinių paviršių pagalvėlių, " +"taip pat sumažėja išorinio tiltelio sluoksnio atsiskyrimas nuo jį supančių " +"perimetrų.\n" +"\n" +"Paprastai rekomenduojama nustatyti bent jau „External bridge only“ (tik " +"išorinis tiltelis), nebent būtų nustatyta specifinių problemų, susijusių su " +"supjaustytu modeliu.\n" +"\n" +"Parinktys:\n" +"1. Išjungta - negeneruojami antrojo tilto sluoksniai. Tai numatytasis " +"nustatymas, kuris nustatytas suderinamumo tikslais.\n" +"2. Tik išorinis tiltas - generuoja antrojo tilto sluoksnius tik į išorę " +"orientuotiems tiltams. Atkreipkite dėmesį, kad maži tiltai, kurie yra " +"trumpesni arba siauresni už nustatytą perimetrų skaičių, bus praleisti, nes " +"jiems antrasis tilto sluoksnis nebus naudingas. Jei sugeneruojamas, antrasis " +"tilto sluoksnis bus išspaustas lygiagrečiai pirmajam tilto sluoksniui, kad " +"būtų sustiprintas tilto tvirtumas.\n" +"3. Tik vidinis tiltas - generuojami antrieji tilto sluoksniai, skirti tik " +"vidiniams tiltams virš reto užpildo. Atkreipkite dėmesį, kad vidiniai tiltai " +"įskaičiuojami į modelio viršutinio apvalkalo sluoksnių skaičių. Antrasis " +"vidinio tilto sluoksnis bus išspaustas kuo arčiau statmenai pirmajam. Jei " +"toje pačioje saloje yra keli regionai su skirtingais tiltelių kampais, kaip " +"atskaitos kampas bus pasirinktas paskutinis tos salos regionas.\n" +"4. Taikyti visiems - sukuriami antrieji tiltų sluoksniai, skirti tiek į " +"vidiniams, tiek į išoriniams tiltams.\n" + +msgid "Disabled" +msgstr "Išjungta" + +msgid "External bridge only" +msgstr "Tik išorinis tiltas" + +msgid "Internal bridge only" +msgstr "Tik vidinis tiltas" + +msgid "Apply to all" +msgstr "Taikyti visiems" + +msgid "Filter out small internal bridges" +msgstr "Filtruoti mažus vidinius tiltus" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" "By default, small internal bridges are filtered out and the internal solid " "infill is printed directly over the sparse infill. This works well in most " "cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" -"Questa opzione può contribuire a ridurre l'effetto 'pillowing' sulle " -"superfici superiori nei modelli fortemente inclinati o curvi.\n" -"\n" -"\n" -"Per impostazione predefinita, i piccoli bridge interni vengono filtrati e il " -"riempimento solido interno viene stampato direttamente sul riempimento." -"Questo metodo funziona bene nella maggior parte dei casi, velocizzando la " -"stampa senza compromettere troppo la qualità della superficie superiore.\n" -"\n" -"Tuttavia, in modelli fortemente inclinati o curvi, soprattutto se si " -"utilizza una densità di riempimento troppo bassa, potrebbe comportare " -"l'arricciamento del riempimento solido non supportato, causando il " -"pillowing.\n" -"\n" -"Abilitando questa opzione, lo strato del bridge interno verrà stampato su un " -"riempimento solido interno leggermente non supportato. Le opzioni " -"sottostanti controllano la quantità di filtraggio, ovvero la quantità di " -"bridge interni creati.\n" -"\n" -"Disabilitato - Disabilita questa opzione. Indica il comportamento " -"predefinito e funziona bene nella maggior parte dei casi.\n" -"\n" -"Filtro limitato - Crea bridge interni su superfici fortemente inclinate, " -"evitando di creare bridge interni non necessari. Funziona bene per la " -"maggior parte dei modelli difficili.\n" -"\n" -"Nessun filtraggio - Crea bridge interni su ogni potenziale sporgenza " -"interna. Questa opzione è utile per i modelli con superficie superiore " -"fortemente inclinata. Tuttavia, nella maggior parte dei casi crea troppi " -"bridge non necessari." - -msgid "Disabled" -msgstr "Disabilitato" +"Ši parinktis gali padėti sumažinti viršutinių paviršių, esančių smarkiai " +"nuožulniuose ar išlenktuose modeliuose, iškilimą.\n" +"Pagal numatytuosius nustatymus nedideli vidiniai tiltai filtruojami, o " +"vidinis vientisas užpildas spausdinamas tiesiai ant reto užpildo. Daugeliu " +"atvejų tai gerai veikia, nes pagreitina spausdinimą per daug nepakenkiant " +"viršutinio paviršiaus kokybei.\n" +"Tačiau smarkiai pasvirusiuose ar išlenktuose modeliuose, ypač jei naudojamas " +"per mažas reto užpildo tankis, gali susiraukšlėti nepalaikomas vientisas " +"užpildas, todėl gali atsirasti iškilimų.\n" +"Įjungus ribotą filtravimą arba jo neįjungus, vidinis tilto sluoksnis bus " +"spausdinamas ant šiek tiek nepalaikomo vidinio vientiso užpildo. Toliau " +"pateiktomis parinktimis valdomas filtravimo jautrumas, t. y. jomis " +"nustatoma, kurioje vietoje sukuriami vidiniai tiltai.\n" +"1. Filtruoti - įjungiama ši parinktis. Tai numatytoji elgsena, kuri daugeliu " +"atvejų veikia gerai.\n" +"2. Ribotas filtravimas - sukuriami vidiniai tiltai smarkiai nuožulniuose " +"paviršiuose, išvengiant nereikalingų tiltų. Tai gerai veikia daugumai " +"sudėtingų modelių.\n" +"3. Be filtravimo - sukuria vidinius tiltus kiekvienoje potencialioje " +"vidinėje iškyšoje. Ši parinktis naudinga stipriai nuožulnių viršutinių " +"paviršių modeliams, tačiau daugeliu atvejų ji sukuria per daug nereikalingų " +"tiltų" msgid "Limited filtering" -msgstr "Filtro limitato" +msgstr "Ribotas filtravimas" msgid "No filtering" -msgstr "Nessun filtraggio" +msgstr "Išjungta" msgid "Max bridge length" -msgstr "Lunghezza massima Bridge" +msgstr "Maksimalus tilto ilgis" msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"Questa è la lunghezza massima dei ponti che non necessitano di supporto. " -"Impostalo su 0 se desideri che tutti i bridge siano supportati e impostalo " -"su un valore molto grande se non vuoi che nessun bridge sia supportato." +"Maksimalus tiltų, kuriems nereikia atramos, ilgis. Nustatykite 0, jei " +"norite, kad būtų remiami visi tiltai, ir labai didelę reikšmę, jei nenorite, " +"kad būtų remiami jokie tiltai." msgid "End G-code" -msgstr "G-code finale" +msgstr "Pabaigos G-kodas" -msgid "End G-code when finish the whole printing" -msgstr "Aggiungi G-code quando si termina l'intera stampa." +msgid "End G-code when finishing the entire print." +msgstr "Pridėti pabaigos G-kodą, kai bus baigtas visas spausdinimas." -msgid "Between Object Gcode" -msgstr "Tra Gcode oggetto" +msgid "Between Object G-code" +msgstr "Tarp objektų G-kodas" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"Inserire Gcode tra gli oggetti. Questo parametro avrà effetto solo quando si " -"stampano i modelli oggetto per oggetto" +"Įterpti G kodą tarp objektų. Šis parametras bus taikomas tik tada, kai " +"spausdinsite modelius po vieną objektą." -msgid "End G-code when finish the printing of this filament" -msgstr "Aggiungi G-code quando si termina la stampa di questo filamento." +msgid "End G-code when finishing the printing of this filament." +msgstr "Pridėti pabaigos G-kodą, kai bus baigta spausdinti ši gija." msgid "Ensure vertical shell thickness" -msgstr "Garantisci spessore verticale del guscio" +msgstr "Užtikrinti vertikalaus apvalkalo storį" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " @@ -10498,91 +12545,84 @@ msgid "" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" -"Aggiunge un riempimento solido in prossimità di superfici inclinate per " -"garantire lo spessore verticale del guscio (layers solidi superiori e " -"inferiori)\n" -"Nessuno: Non viene aggiunto alcun riempimento solido. Attenzione: utilizzare " -"questa opzione con precauzione se il modello presenta superfici inclinate\n" -"Solo Critico: Evitare l'aggiunta di riempimenti solidi per le pareti\n" -"Moderato: Aggiungere il riempimento solido solo per le superfici fortemente " -"inclinate.\n" -"Tutto: aggiunge un riempimento solido per tutte le superfici inclinate " -"idonee\n" -"Il valore predefinito è Tutto." +"Prie nuožulnių paviršių pridėti kietąjį užpildą, kad būtų užtikrintas " +"vertikalus apvalkalo storis (viršutinis ir apatinis vientisi sluoksniai).\n" +"Nėra: Vientisas užpildas niekur nepridedamas. Dėmesio: Jei jūsų modelyje yra " +"nuožulnių paviršių, naudokite šią parinktį atsargiai.\n" +"Tik kritiniai: Venkite pridėti vientisą sienų užpildą\n" +"Vidutiniai: Pridėti vientisą užpildą tik smarkiai nuožulniems paviršiams\n" +"Visi: pridėkite vientisą užpildą visiems tinkamiems nuožulniems paviršiams\n" +"Numatytoji reikšmė yra Visi." msgid "Critical Only" -msgstr "Solo Critico" +msgstr "Tik kritiniai" msgid "Moderate" -msgstr "Moderato" +msgstr "Vidutiniai" msgid "Top surface pattern" -msgstr "Trama superfice superiore" +msgstr "Viršutinio paviršiaus raštas" -msgid "Line pattern of top surface infill" -msgstr "" -"Questo è la Trama lineare per il riempimento della superficie superiore." - -msgid "Concentric" -msgstr "Concentrico" - -msgid "Rectilinear" -msgstr "Rettilineo" +msgid "Line pattern of top surface infill." +msgstr "Tai viršutinio paviršiaus užpildymo linijomis modelis." msgid "Monotonic" -msgstr "Monotonico" +msgstr "Monotoniškas" msgid "Monotonic line" -msgstr "Linea monotonica" +msgstr "Monotoniška linija" + +msgid "Rectilinear" +msgstr "Tiesia linija" msgid "Aligned Rectilinear" -msgstr "Rettilineo allineato" +msgstr "Tiesiai sulygiuota" + +msgid "Concentric" +msgstr "Koncentrinis" msgid "Hilbert Curve" -msgstr "Curva di Hilbert" +msgstr "Hilberto kreivė" msgid "Archimedean Chords" -msgstr "Corde di Archimede" +msgstr "Archimedo akordai" msgid "Octagram Spiral" -msgstr "Spirale a Ottogramma" +msgstr "Oktagramos spiralė" msgid "Bottom surface pattern" -msgstr "Trama superficie inferiore" +msgstr "Apatinio paviršiaus užpildo linijų raštas" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" -"Questo è la trama lineare del riempimento della superficie inferiore, " -"escluso il riempimento del ponte." +"Tai apatinio paviršiaus užpildymo linijioms raštas, išskyrus tiltų užpildymą." msgid "Internal solid infill pattern" -msgstr "Schema di riempimento solido interno" +msgstr "Vidinis vientiso užpildo raštas" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " "infill be enabled, the concentric pattern will be used for the small area." msgstr "" -"Modello di linea del riempimento solido interno. Se l'opzione Rileva " -"riempimento solido interno Nattow è abilitata, il motivo concentrico verrà " -"utilizzato per l'area piccola." +"Vidinio vientiso užpildo linijų raštas. Jei įjungta funkcija aptikti siaurą " +"vidinį vientisą užpildą, mažam plotui bus naudojamas koncentrinis raštas." msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea della parete esterna. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Išorinės sienos linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas " +"pagal purkštuko skersmenį." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"Indica la velocità di stampa per le pareti esterne dei pezzi. Queste vengono " -"generalmente stampate più lentamente delle pareti interne per ottenere una " -"qualità superiore." +"Išorinės sienos, kuri yra išorinė ir matoma, greitis. Naudojamas lėtesnis " +"nei vidinės sienelės greitis, kad būtų pasiekta geresnė kokybė." msgid "Small perimeters" -msgstr "Perimetri piccoli" +msgstr "Maži perimetrai" msgid "" "This separate setting will affect the speed of perimeters having radius <= " @@ -10590,28 +12630,27 @@ msgid "" "example: 80%) it will be calculated on the outer wall speed setting above. " "Set to zero for auto." msgstr "" -"Questa impostazione separata influenzerà la velocità dei perimetri con " -"raggio <= small_perimeter_threshold (di solito fori). Se espresso in " -"percentuale (ad esempio: 80%) verrà calcolato sull'impostazione della " -"velocità della parete esterna di cui sopra. Impostare su zero per auto." +"Šis atskiras nustatymas turės įtakos perimetrų, kurių spindulys <= " +"small_perimeter_threshold (paprastai skylės), greičiui. Jei jis išreikštas " +"procentais (pvz., 80 %), jis bus apskaičiuojamas pagal pirmiau nurodytą " +"išorinės sienos greičio nustatymą. Nustatykite nulį, jei norite, kad greitis " +"būtų automatinis." msgid "Small perimeters threshold" -msgstr "Soglia perimetrale ridotta" +msgstr "Mažo perimetro ribos" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" -msgstr "" -"In questo modo viene impostata la soglia per la lunghezza del perimetro " -"ridotta. La soglia predefinita è 0 mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." +msgstr "Nustatoma mažo perimetro ilgio riba. Numatytoji riba yra 0 mm." msgid "Walls printing order" -msgstr "Ordine Stampa Pareti" +msgstr "Sienų spausdinimo eiliškumas" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10621,128 +12660,130 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Sequenza di stampa delle pareti interne (interne) ed esterne (esterne). \n" +"Vidinių (vidinių) ir išorinių (išorinių) sienų spausdinimo seka.\n" "\n" -"Utilizzare Interno/Esterno per le migliori sporgenze. Questo perché le " -"pareti sporgenti possono aderire a un perimetro vicino durante la stampa. " -"Tuttavia, questa opzione comporta una qualità della superficie leggermente " -"ridotta poiché il perimetro esterno viene deformato dall'essere schiacciato " -"sul perimetro interno.\n" +"Naudokite Vidinės / Išorinės, jei norite, kad iškyšos būtų geriausios. Taip " +"yra todėl, kad spausdinant išsikišusios sienos gali prilipti prie kaimyninio " +"perimetro. Tačiau dėl šios parinkties šiek tiek suprastėja paviršiaus " +"kokybė, nes išorinis perimetras deformuojamas prispaudžiant jį prie vidinio " +"perimetro.\n" "\n" -"Utilizzare Interno/Esterno/Interno per ottenere la migliore finitura " -"superficiale esterna e precisione dimensionale poiché la parete esterna " -"viene stampata indisturbata da un perimetro interno. Tuttavia, le " -"prestazioni di sporgenza si ridurranno in quanto non c'è un perimetro " -"interno contro cui stampare la parete esterna. Questa opzione richiede un " -"minimo di 3 pareti per essere efficace in quanto stampa prima le pareti " -"interne dal 3° perimetro in poi, poi il perimetro esterno e, infine, il " -"primo perimetro interno. Nella maggior parte dei casi, questa opzione è " -"consigliata rispetto all'opzione Esterno/Interno. \n" +"Naudokite Vidinis / išorinis / vidinis, jei norite gauti geriausią išorinio " +"paviršiaus apdailą ir matmenų tikslumą, nes išorinė siena spausdinama " +"nepažeista vidinio perimetro. Tačiau iškyšų kokybė sumažėja, nes nėra " +"vidinio perimetro, prie kurio būtų galima atspausdinti išorinę sienelę. Kad " +"ši parinktis būtų veiksminga, reikia mažiausiai 3 sienų, nes pirmiausia " +"atspausdinamos vidinės sienos nuo trečiojo perimetro, tada išorinis " +"perimetras ir galiausiai pirmasis vidinis perimetras. Šią parinktį daugeliu " +"atvejų rekomenduojama rinktis ne kaip išorinę / vidinę parinktį.\n" "\n" -"Utilizzare Esterno/Interno per ottenere la stessa qualità della parete " -"esterna e gli stessi vantaggi di precisione dimensionale dell'opzione " -"Interno/Esterno/Interno. Tuttavia, le giunzioni z appariranno meno coerenti " -"quando la prima estrusione di un nuovo livello inizia su una superficie " -"visibile.\n" -" " +"Naudokite Išorinė / vidinė, kad išorinių sienų kokybė ir matmenų tikslumas " +"būtų tokie patys, kaip ir pasirinkus Vidinė / išorinė / vidinė parinktį. " +"Tačiau z siūlės atrodys ne tokios nuoseklios, nes pirmasis naujo sluoksnio " +"išspaudimas prasideda matomame paviršiuje." msgid "Inner/Outer" -msgstr "Interna/Esterna" +msgstr "Vidinės/Išorinės" msgid "Outer/Inner" -msgstr "Esterna/Interna" +msgstr "Išorinės/Vidinės" msgid "Inner/Outer/Inner" -msgstr "Interna/Esterna/Interna" +msgstr "Vidinės/Išorinės/Vidinės" msgid "Print infill first" -msgstr "Stampa prima il riempimento" +msgstr "Pirmiausia spausdinti užpildą" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed " "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" +"Sienų ir (arba) užpildymo tvarka. Kai žymės langelis nepažymėtas, sienos " +"spausdinamos pirmosios, o tai daugeliu atvejų veikia geriausiai.\n" +"\n" +"Spausdinti užpildą pirmiausia gali būti lengviau, kai yra labai dideli " +"iškyšuliai, nes sienos turi laikytis gretimo užpildo. Tačiau užpildas šiek " +"tiek išstumia atspausdintas sienas ten, kur jis prie jų pritvirtintas, todėl " +"išorinio paviršiaus apdaila būna prastesnė. Dėl to užpildas taip pat gali " +"persišviesti per išorinius detalės paviršius." msgid "Wall loop direction" -msgstr "Direzione del loop del muro" +msgstr "Sienos kontūro kryptis" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"La direzione in cui vengono estrusi i loop del muro quando si guarda verso " -"il basso dall'alto.\n" +"Sienų kontūrų išspaudimo kryptis žiūrint iš viršaus žemyn.\n" "\n" -"Per impostazione predefinita, tutti i muri vengono estrusi in senso " -"antiorario, a meno che non sia abilitata l'opzione Inverti su dispari. " -"Impostando questa opzione su qualsiasi opzione diversa da Auto si forzerà la " -"direzione del muro indipendentemente dall'inversione su dispari.\n" +"Pagal numatytuosius nustatymus visos sienos išspaudžiamos prieš laikrodžio " +"rodyklę, nebent įjungta galimybė „ Apsukti lyginius“. Nustačius bet kurią " +"kitą parinktį, išskyrus Auto (automatinis), sienos kryptis bus priverstinė, " +"neatsižvelgiant į įjungtą funkciją Apsukti lyginius.\n" "\n" -"Questa opzione sarà disabilitata se è abilitata la modalità vaso sprial." +"Ši parinktis bus išjungta, jei įjungtas spiralinės vazos režimas." msgid "Counter clockwise" -msgstr "Antiorario" +msgstr "Prieš laikrodžio rodyklę" msgid "Clockwise" -msgstr "In senso orario" +msgstr "Pagal laikrodžio rodyklę" msgid "Height to rod" -msgstr "Altezza asta" +msgstr "Aukštis iki strypo" msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"Distanza dalla punta del nozzle all'asta inferiore. Utilizzato per evitare " -"le collisioni nella stampa di oggetto per oggetto." +"Atstumas nuo purkštuko galo iki apatinio strypo. Naudojamas siekiant " +"išvengti susidūrimų spausdinant pagal objektus." msgid "Height to lid" -msgstr "Altezza dal coperchio" +msgstr "Aukštis iki dangtelio" msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." msgstr "" -"Distanza dalla punta del nozzle al coperchio. Utilizzato per evitare le " -"collisioni nella stampa oggetto per oggetto." +"Atstumas nuo antgalio galo iki dangtelio. Naudojamas siekiant išvengti " +"susidūrimų spausdinant pagal objektus." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." msgstr "" -"Raggio di sicurezza attorno all'estrusore: utilizzato per evitare collisioni " -"nella stampa per oggetto." +"Tarpas aplink ekstruderį. Naudojamas siekiant išvengti susidūrimų " +"spausdinant pagal objektus." msgid "Nozzle height" -msgstr "Altezza nozzle" +msgstr "Purkštuko aukštis" msgid "The height of nozzle tip." -msgstr "L'altezza punta del nozzle." +msgstr "Purkštuko antgalio aukštis." msgid "Bed mesh min" -msgstr "Maglia del letto min" +msgstr "Pagrindo figūros min" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10754,19 +12795,17 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Questa opzione imposta il punto minimo per l'area della mesh del letto " -"consentita. A causa dell'offset XY della sonda, la maggior parte delle " -"stampanti non è in grado di sondare l'intero letto. Per garantire che il " -"punto della sonda non esca dall'area del letto, i punti minimo e massimo " -"della rete del letto devono essere impostati in modo appropriato. Snapmaker Orca " -"garantisce che i valori adaptive_bed_mesh_min/adaptive_bed_mesh_max non " -"superino questi punti min/max. Queste informazioni possono in genere essere " -"ottenute dal produttore della stampante. L'impostazione predefinita è " -"(-99999, -99999), il che significa che non ci sono limiti, consentendo così " -"il rilevamento su tutto il letto." +"Šia parinktimi nustatomas mažiausias leistinas pagrindo ploto taškas. Dėl " +"zondo XY poslinkio dauguma spausdintuvų negali zonduoti viso pagrindo. " +"Siekiant užtikrinti, kad zondo taškas neišeitų už pagrindo ploto ribų, " +"reikia tinkamai nustatyti minimalų ir maksimalų pagrindo figūros taškus. " +"Snapmaker Orca užtikrina, kad adaptive_bed_mesh_min/adaptive_bed_mesh_max vertės " +"neviršytų šių min. ir maks. taškų. Šią informaciją paprastai galima gauti iš " +"spausdintuvo gamintojo. Numatytoji nuostata yra (-99999, -99999), t. y. nėra " +"jokių apribojimų, todėl galima zonduoti visą pagrindą." msgid "Bed mesh max" -msgstr "Maglia letto max" +msgstr "Pagrindo figūros maks" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10778,188 +12817,415 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Questa opzione imposta il punto massimo per l'area della mesh del letto " -"consentita. A causa dell'offset XY della sonda, la maggior parte delle " -"stampanti non è in grado di sondare l'intero letto. Per garantire che il " -"punto della sonda non esca dall'area del letto, i punti minimo e massimo " -"della rete del letto devono essere impostati in modo appropriato. Snapmaker Orca " -"garantisce che i valori adaptive_bed_mesh_min/adaptive_bed_mesh_max non " -"superino questi punti min/max. Queste informazioni possono in genere essere " -"ottenute dal produttore della stampante. L'impostazione predefinita è " -"(99999, 99999), il che significa che non ci sono limiti, consentendo così di " -"sondare l'intero letto." +"Šia parinktimi nustatomas didžiausias leistinas pagrindo ploto taškas. Dėl " +"zondo XY poslinkio dauguma spausdintuvų negali zonduoti viso pagrindo. " +"Siekiant užtikrinti, kad zondo taškas neišeitų už pagrindo ploto ribų, " +"reikia tinkamai nustatyti minimalų ir maksimalų pagrindo figūros taškus. " +"Snapmaker Orca užtikrina, kad adaptive_bed_mesh_min/adaptive_bed_mesh_max vertės " +"neviršytų šių min. ir maks. taškų. Šią informaciją paprastai galima gauti iš " +"spausdintuvo gamintojo. Numatytoji nuostata yra (99999, 99999), t. y. nėra " +"jokių apribojimų, todėl galima zonduoti visą pagrindą." msgid "Probe point distance" -msgstr "Distanza del punto della sonda" +msgstr "Atstumas iki zondo taško" msgid "" "This option sets the preferred distance between probe points (grid size) for " "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" -"Questa opzione imposta la distanza preferita tra i punti della sonda " -"(dimensione della griglia) per le direzioni X e Y, con il valore di default " -"di 50 mm sia per X che per Y." +"Šia parinktimi nustatomas pageidaujamas atstumas tarp zondo taškų (tinklelio " +"dydis) X ir Y kryptimis; pagal numatytuosius nustatymus tiek X, tiek Y " +"kryptimis nustatomas 50 mm atstumas." msgid "Mesh margin" -msgstr "Margine mesh" +msgstr "Figūros riba" msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." msgstr "" -"Questa opzione determina la distanza aggiuntiva in base alla quale l'area " -"della mesh del letto adattivo deve essere espansa nelle direzioni XY." +"Šia parinktimi nustatomas papildomas atstumas, kuriuo XY kryptimis turėtų " +"būti išplėsta adaptyviojo pagrindo figūros sritis." + +msgid "Grab length" +msgstr "" msgid "Extruder Color" -msgstr "Colore estrusore" +msgstr "Ekstruderio spalva" -msgid "Only used as a visual help on UI" -msgstr "Utilizzato solo come aiuto visivo per l'interfaccia utente" +msgid "Only used as a visual help on UI." +msgstr "Naudojama tik kaip vaizdinė pagalba vartotojo sąsajai." msgid "Extruder offset" -msgstr "Offset estrusore" +msgstr "Ekstruderio poslinkis" msgid "Flow ratio" -msgstr "Rapporto di flusso" +msgstr "Srauto santykis" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" -"Il materiale può subire variazioni volumetriche dopo il passaggio dallo " -"stato fuso a quello cristallino. Questa impostazione modifica in modo " -"proporzionale tutti i flussi di estrusione di questo filamento in G-code. " -"L'intervallo di valori raccomandato è compreso tra 0,95 e 1,05. È possibile " -"regolare questo valore per ottenere una superficie piatta se si verifica una " -"leggera sovra-estrusione o sotto-estrusione." +"Medžiaga gali keisti tūrį, kai pereina iš lydyto į kristalinį būvį. Šis " +"nustatymas proporcingai keičia visą šios gijos ekstruzijos srautą G kodu. " +"Rekomenduojamas vertės diapazonas yra nuo 0,95 iki 1,05. Jei yra nedidelis " +"perteklius arba trūkumas, galite sureguliuoti šią vertę, kad gautumėte gražų " +"lygų paviršių." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Medžiaga gali keisti tūrį, pereidama iš lydyto į kristalinį būvį. Šis " +"nustatymas proporcingai keičia visą šios gijos ekstruzijos srautą G kodu. " +"Rekomenduojamas vertės diapazonas yra nuo 0,95 iki 1,05. Jei yra nedidelis " +"perteklius arba trūkumas, galite sureguliuoti šią vertę, kad gautumėte gražų " +"lygų paviršių.\n" +"\n" +"Galutinis objekto srauto santykis yra ši vertė, padauginta iš gijos srauto " +"santykio." msgid "Enable pressure advance" -msgstr "Abilita l'avanzamento della pressione" +msgstr "Įjungti išankstinį slėgio didinimą" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Abilita l'avanzamento della pressione, il risultato della calibrazione " -"automatica verrà sovrascritto una volta abilitato." +"Įjunkite išankstinį slėgį, įjungus automatinio kalibravimo rezultatą, jis " +"bus perrašytas." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Anticipo di pressione (Klipper) AKA Fattore di avanzamento lineare (Marlin)" +"Išankstinis slėgis (Klipper) arba linijinis išankstinis veiksnys (Marlin)" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Įjungti prisitaikantį išankstinį slėgį (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Pastebėta, kad didėjant spausdinimo greičiui (taigi ir tūriniam srautui per " +"purkštuką) ir didėjant pagreičiui, efektyvioji IS vertė paprastai mažėja. " +"Tai reiškia, kad viena IS reikšmė ne visada yra 100 % optimali visiems " +"elementams ir paprastai naudojama kompromisinė reikšmė, kuri nesukelia per " +"didelio išgaubimo elementams, kurių srauto greitis ir pagreičiai yra " +"mažesni, ir kartu nesukelia spragų greitesniems elementams.\n" +"\n" +"Šia funkcija siekiama išspręsti šį apribojimą modeliuojant spausdintuvo " +"išspaudimo sistemos reakciją priklausomai nuo tūrinio srauto greičio ir " +"pagreičio, kuriuo spausdinama. Viduje sukuriamas pritaikytas modelis, pagal " +"kurį galima ekstrapoliuoti reikiamą slėgio padidėjimą bet kokiam tūrio " +"srauto greičiui ir pagreičiui, kuris tada siunčiamas spausdintuvui, " +"atsižvelgiant į esamas spausdinimo sąlygas.\n" +"\n" +"Kai ši funkcija įjungta, pirmiau nurodyta išankstinio slėgio vertė " +"pakeičiama. Tačiau rekomenduojama nustatyti pagrįstą numatytąją pirmiau " +"nurodytą vertę, kad ji veiktų kaip atsarginis variantas ir būtų naudojama " +"keičiant įrankį.\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Adaptyvūs išankstinio slėgio matavimai (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Pridėkite išankstinio slėgio (IS) verčių rinkinius, tūrinius srauto greičius " +"ir pagreičius, kuriems esant jie buvo išmatuoti, atskirti kableliu. Vienoje " +"eilutėje pateikite po vieną verčių rinkinį. Pavyzdžiui\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Kaip kalibruoti:\n" +"1. Atlikite slėgio avanso bandymą bent 3 greičiams pagal kiekvieną pagreičio " +"reikšmę. Rekomenduojama testą atlikti bent išorinių perimetrų greičiui, " +"vidinių perimetrų greičiui ir greičiausiam jūsų profilio funkcijos " +"spausdinimo greičiui (paprastai tai būna retas arba vientisas užpildas). " +"Tada paleiskite juos tokiems pat greičiams, kai spausdinama lėčiausiu ir " +"sparčiausiu greičiu, ir ne didesniu nei rekomenduojamas didžiausias " +"pagreitis, nurodytas „Klipper“ įvesties formuotuve.\n" +"2. Atkreipkite dėmesį į optimalią IS vertę kiekvienam tūrinio srauto " +"greičiui ir pagreičiui. Srauto skaičių galite rasti pasirinkę srautą iš " +"spalvų schemos išskleidžiamojo sąrašo ir perkeldami horizontalųjį slankiklį " +"virš IS modelio linijų. Skaičius turėtų būti matomas puslapio apačioje. " +"Ideali IS vertė turėtų mažėti, kuo didesnis tūrinis srautas. Jei taip nėra, " +"įsitikinkite, kad jūsų ekstruderis veikia tinkamai. kuo lėčiau ir su " +"mažesniu pagreičiu spausdinate, tuo didesnis priimtinų IS verčių diapazonas. " +"Jei jokio skirtumo nematyti, naudokite IS vertę, gautą atliekant greitesnį " +"bandymą.\n" +"3. Čia esančiame teksto laukelyje įveskite IS verčių, srauto ir pagreičio " +"reikšmes ir išsaugokite gijos profilį" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Įjungti prisitaikantį išankstinį slėgį iškyšoms (beta versija)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Įjunkite prisitaikantį IS iškyšoms, taip pat kai srautas keičiasi toje " +"pačioje vietoje. Tai eksperimentinė parinktis, nes jei IS profilis " +"nustatomas netiksliai, gali kilti išorinių paviršių vienodumo problemų prieš " +"ir už iškyšų.\n" + +msgid "Pressure advance for bridges" +msgstr "Tiltų išankstinis slėgis" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Išankstinio slėgio vertė tiltams. Nustatykite 0, kad išjungtumėte.\n" +"\n" +" Mažesnė IS vertė spausdinant tiltus padeda sumažinti nedidelį nepakankamą " +"išspaudimą iškart po tiltų. Taip atsitinka dėl slėgio kritimo purkštuke, kai " +"spausdinama ore, o mažesnė IS vertė padeda tai neutralizuoti." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." msgstr "" -"Larghezza di linea predefinita se le altre larghezze di linea sono impostate " -"su 0. Se espresso come %, verrà calcolato sul diametro del nozzle." +"Numatytasis linijos plotis, jei kitų linijų plotis lygus 0. Jei išreiškiamas " +"%, apskaičiuojamas pagal purkštuko skersmenį." msgid "Keep fan always on" -msgstr "Mantieni la ventola sempre accesa" +msgstr "Visada laikyti ventiliatorių įjungtą" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" -"Se si attiva questa impostazione, la ventola di raffreddamento non si " -"arresterà mai del tutto, ma funzionerà almeno alla velocità minima per " -"ridurre la frequenza di avvio e arresto." +"Jei įjungsite šį nustatymą, aušinimo ventiliatorius niekada nebus " +"sustabdytas ir veiks bent minimaliu greičiu, kad sumažėtų įjungimo ir " +"išjungimo dažnis." msgid "Don't slow down outer walls" -msgstr "" +msgstr "Nelėtinti išorinių sienų" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"Jei šis nustatymas įjungtas, bus užtikrinta, kad išoriniai perimetrai nebūtų " +"sulėtinti, kad būtų pasiektas minimalus sluoksnio laikas. Tai ypač naudinga " +"toliau nurodytais scenarijais:\n" +"1. Norint išvengti blizgesio pokyčių spausdinant blizgius siūlus\n" +"2. Norint išvengti išorinių sienelių greičio pokyčių, dėl kurių gali " +"atsirasti nedidelių sienelių artefaktų, kurie atrodo kaip z juostos.\n" +"3. Kad būtų išvengta spausdinimo greičio, dėl kurio ant išorinių sienelių " +"atsiranda VFA (smulkūs artefaktai)" msgid "Layer time" -msgstr "Layer time" +msgstr "Sluoksnio laikas" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" -"La ventola di raffreddamento parziale verrà attivata per i layer in cui il " -"tempo stimato è inferiore a questo valore. La velocità della ventola viene " -"interpolata tra la velocità minima e massima della ventola in base al tempo " -"di stampa a layer." +"Dalių aušinimo ventiliatorius bus įjungtas sluoksniams, kurių numatomas " +"laikas yra trumpesnis už šią vertę. Ventiliatoriaus greitis nustatomas tarp " +"mažiausio ir didžiausio ventiliatoriaus greičio pagal sluoksnio spausdinimo " +"laiką." msgid "Default color" -msgstr "Colore predefinito" +msgstr "Numatytoji spalva" -msgid "Default filament color" -msgstr "Colore predefinito del filamento" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Numatytoji gijos spalva.\n" +"Dešiniuoju pelės mygtuku spustelėkite, kad nustatytumėte sistemos numatytąją " +"vertę." msgid "Filament notes" -msgstr "Note filamento" +msgstr "Gijos pastabos" msgid "You can put your notes regarding the filament here." -msgstr "È possibile inserire qui le note riguardanti il filamento." +msgstr "Čia galite įdėti pastabas apie giją." msgid "Required nozzle HRC" -msgstr "Necessita nozzle HRC" +msgstr "Būtinas antgalis HRC" msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"HRC minimo del nozzle richiesto per stampare il filamento. Un valore pari a " -"0 significa che non viene controllato l'HRC del nozzle." +"Mažiausia antgalio HRC, kurios reikia norint spausdinti gijomis. Nulis " +"reiškia, kad antgalio HRC netikrinama." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" -"Questa indica il volume del filamento che può essere fuso ed estruso al " -"secondo. La velocità di stampa è limitata dalla velocità volumetrica " -"massima, in caso di impostazione della velocità troppo alta e irragionevole. " -"Questo valore non può essere zero." - -msgid "mm³/s" -msgstr "mm³/s" +"Gijos tūris, kurį galima išlydyti ir išspausti per sekundę. Jei nustatytas " +"per didelis ir nepagrįstas greitis, spausdinimo greitį riboja maksimalus " +"tūrinis greitis. Ši reikšmė negali būti lygi nuliui." msgid "Filament load time" -msgstr "Durata caricamento filamento" +msgstr "Gijos įkrovimo laikas" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tempo di caricamento del nuovo filamento quando si cambia filamento, solo a " -"fini statistici." +"Naujos gijos įkrovimo laikas, kai perjungiama gija. Tai paprastai taikoma " +"vieno ekstruderio daugialypės terpės mašinoms. Įrankių keitimo arba " +"daugiafunkcinėms mašinoms paprastai taikomas 0. Tik statistiniams duomenims." msgid "Filament unload time" -msgstr "Durata scaricamento filamento" - -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "" -"Tempo di scarico vecchio filamento quando si cambia filamento, solo a fini " -"statistici." +msgstr "Gijos iškrovimo laikas" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Il diametro del filamento viene utilizzato per calcolare le variabili di " -"estrusione nel G-code, quindi è importante che sia accurato e preciso." +"Laikas senos gijos iškrovimui, kai keičiama gija. Tai paprastai taikoma " +"vieno ekstruderio kelių medžiagų mašinoms. Įrankių keitimo arba " +"daugiafunkcinėms mašinoms paprastai taikomas 0. Tik statistiniams duomenims." + +msgid "Tool change time" +msgstr "Įrankių keitimo laikas" + +msgid "" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Įrankių keitimo laikas. Jis paprastai taikomas įrankių keitimo įrenginiams " +"arba daugiafunkcinėms staklėms. Vieno ekstruderio kelių medžiagų mašinoms " +"jis paprastai lygus 0. Tik statistiniams duomenims." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"G-kodo ekstruzijos apskaičiavimui naudojamas gijos skersmuo, todėl jis yra " +"svarbus ir turi būti tikslus." msgid "Pellet flow coefficient" -msgstr "" +msgstr "Granulių srauto koeficientas" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10967,88 +13233,140 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"Granulių srauto koeficientas nustatomas empiriškai ir leidžia apskaičiuoti " +"granulių spausdintuvų tūrį.\n" +"\n" +"Viduje jis konvertuojamas į filament_diameter. Visi kiti tūrio skaičiavimai " +"išlieka tokie patys.\n" +"\n" +"filament_diameter = sqrt( (4 * granulių srauto koeficientas) / PI )" -msgid "Shrinkage" -msgstr "Restringimento" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Susitraukimas (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" -"Inserisci la percentuale di restringimento che il filamento otterrà dopo il " -"raffreddamento (94% if misuri 94 mm invece di 100 mm). La parte verrà " -"scalata in xy per compensare. Viene preso in considerazione solo il " -"filamento utilizzato per il perimetro.\n" -"Assicurarsi di lasciare uno spazio sufficiente tra gli oggetti, poiché " -"questa compensazione viene eseguita dopo i controlli." +"Įveskite susitraukimo procentą, kurį gija gaus po aušinimo (94%, jei " +"matuojate 94 mm, o ne 100 mm). Dalis bus keičiama XY masteliu, kad būtų " +"kompensuota. Atsižvelgiama tik į perimetrui naudojamą giją.\n" +"Būtinai palikite pakankamai vietos tarp objektų, nes ši kompensacija " +"atliekama po patikrinimų." + +msgid "Shrinkage (Z)" +msgstr "Susitraukimas (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Įveskite susitraukimo procentą, kurį gija gaus po aušinimo (94 %, jei " +"matuojate 94 mm, o ne 100 mm). Dalis bus keičiama Z masteliu, kad tai būtų " +"kompensuota." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" -msgstr "Velocità di caricamento" +msgstr "Pakrovimo greitis" msgid "Speed used for loading the filament on the wipe tower." -msgstr "Velocità utilizzata per caricare il filamento sulla torre di pulitura." +msgstr "" +"Greitis, naudojamas kaitinamojo siūlelio uždėjimui ant šluostymo bokštelio." msgid "Loading speed at the start" -msgstr "Velocità iniziale di caricamento" +msgstr "Pakrovimo greitis pradžioje" msgid "Speed used at the very beginning of loading phase." -msgstr "Velocità utilizzata all'inizio della fase di caricamento." +msgstr "Greitis, naudojamas pačioje pakrovimo fazės pradžioje." msgid "Unloading speed" -msgstr "Velocità di scaricamento" +msgstr "Iškrovimo greitis" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"Velocità usata per scaricare il filamento sulla torre di pulitura (non " -"influisce sulla parte iniziale dello scaricamento dopo il ramming)." +"Greitis, naudojamas gijos išleidimui ant valymo bokštelio (neturi įtakos " +"pradinei išleidimo daliai iškart po lyginimo)." msgid "Unloading speed at the start" -msgstr "Velocità iniziale di scaricamento" +msgstr "Iškrovimo greitis pradžioje" msgid "" "Speed used for unloading the tip of the filament immediately after ramming." -msgstr "" -"Velocità utilizzata per scaricare la punta del filamento immediatamente dopo " -"il ramming." +msgstr "Greitis, naudojamas gijos galiuko iškrovimui iš karto po ramingo." msgid "Delay after unloading" -msgstr "Ritardo dopo lo scarico" +msgstr "Vėlavimas po išleidimo" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" -"Tempo di attesa dopo lo scarico del filamento. Può aiutare ad ottenere cambi " -"affidabili con materiali flessibili che potrebbero richiedere più tempo per " -"tornare alle dimensioni originali." +"Laukimo laikas po to, kai gija išleista. Gali padėti naudojant lanksčias " +"medžiagas, kurioms gali prireikti daugiau laiko susitraukti iki pradinių " +"matmenų." msgid "Number of cooling moves" -msgstr "Numero di movimenti di raffreddamento" +msgstr "Aušinimo judesių skaičius" msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"Il filamento è raffreddato venendo spostato avanti e indietro nei tubi di " -"raffreddamento. Specificare il numero desiderato di questi movimenti." +"Gija aušinama judant pirmyn ir atgal aušinimo vamzdeliuose. Nurodykite " +"pageidaujamą šių judesių skaičių." + +msgid "Stamping loading speed" +msgstr "Antspaudų užkrovimo greitis" + +msgid "Speed used for stamping." +msgstr "Greitis, naudojamas štampavimui." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Štampavimo atstumas, matuojamas nuo aušinimo vamzdelio centro" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Jei nustatyta nenulinė reikšmė, gija tarp atskirų aušinimo judesių judinama " +"link purkštuko („štampavimas“). Šia parinktimi nustatoma, kiek laiko turi " +"trukti šis judėjimas, kol gija vėl įtraukiama." msgid "Speed of the first cooling move" -msgstr "Velocità del primo movimento di raffreddamento" +msgstr "Pirmojo aušinimo judesio greitis" msgid "Cooling moves are gradually accelerating beginning at this speed." -msgstr "" -"I movimenti di raffreddamento accelerano gradualmente partendo da questa " -"velocità." +msgstr "Aušinimo judesiai palaipsniui greitėja, pradedant tokiu greičiu." msgid "Minimal purge on wipe tower" -msgstr "Spurgo minimo sulla torre di pulitura" +msgstr "Minimalus valymas ant šluostymo bokštelio" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -11057,216 +13375,286 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Dopo un cambio di strumento, l'esatta posizione del filamento appena " -"caricato dentro l'ugello potrebbe essere sconosciuta, e la pressione del " -"filamento probabilmente non è ancora stabile. Prima di spurgare la testina " -"di stampa nel riempimento o in un oggetto sacrificale, Snapmaker Orca " -"posizionerà questo materiale in una torre di pulitura al fine di ottenere " -"una successiva estrusione affidabile su oggetto sacrificale o riempimento." +"Pakeitus įrankį, gali būti nežinoma tiksli naujai įdėtos gijos padėtis " +"purkštuke, o gijos slėgis greičiausiai dar nėra stabilus. Prieš spausdinimo " +"galvutei prapučiant užpildą arba apsauginį objektą, \"Snapmaker Orca\" visuomet " +"paruoš tokį medžiagos kiekį į valymo bokštą, kad būtų patikimai gaminami " +"vienas po kito einantys užpildų arba apsauginių objektų išspaudimai." msgid "Speed of the last cooling move" -msgstr "Velocità dell'ultimo movimento di raffreddamento" +msgstr "Paskutinio aušinimo judesio greitis" msgid "Cooling moves are gradually accelerating towards this speed." -msgstr "" -"I movimenti di raffreddamento accelerano gradualmente verso questa velocità." - -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) per " -"il caricamento del nuovo filamento durante il cambio strumento (quando viene " -"eseguito il T code). Questa durata viene aggiunta alla stima del tempo " -"totale di stampa del G-code." +msgstr "Aušinimo judesiai palaipsniui greitėja link šio greičio." msgid "Ramming parameters" -msgstr "Parametri del ramming" +msgstr "Įspaudimo parametrai" msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" -"Questa stringa viene controllata da RammingDialog e contiene parametri " -"specifici del ramming." +"Šią eilutę redaguoja RammingDialog ir joje yra specifiniai įspaudimo " +"parametrai." + +msgid "Enable ramming for multi-tool setups" +msgstr "Įgalinti daugiafunkcinių įrankių nustatymų tankinimą" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -"Tempo per il firmware della stampante (o per l'unità Multi Material 2.0) per " -"lo scaricamento del nuovo filamento durante il cambio strumento (quando " -"viene eseguito il T code). Questa durata viene aggiunta alla stima del tempo " -"totale di stampa del G-code." +"Atlikti tankinimą, kai naudojamas daugiafunkcinis spausdintuvas (t. y. kai " +"spausdintuvo nustatymuose nepažymėta parinktis „Vienas išspaudiklis, " +"įvairios medžiagos“). Kai ši parinktis pažymėta, nedidelis gijos kiekis " +"greitai išspaudžiamas ant valymo bokšto prieš pat įrankio keitimą. Ši " +"parinktis naudojama tik tada, kai įjungtas valymo bokštas." -msgid "Enable ramming for multitool setups" -msgstr "Abilita ramming per configurazioni multitool" +msgid "Multi-tool ramming volume" +msgstr "Daugiafunkcinių įrankių tankinimo tūris" -msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." -msgstr "" -"Esegue il ramming quando si usa una stampante multitool (Ad esempio, quando " -"l'opzione \"Multimateriale a estrusore singolo\" nelle impostazioni della " -"stampante è deselezionata.). Quando è selezionata, una piccola quantità di " -"filamento viene estrusa rapidamente sulla torre di pulitura appena prima del " -"cambio strumento. Questa opzione viene utilizzata solo quando la torre di " -"pulitura è abilitata." +msgid "The volume to be rammed before the tool change." +msgstr "Tūris, kuris turi būti įspaustas prieš keičiant įrankį." -msgid "Multitool ramming volume" -msgstr "Volume ramming multitool" +msgid "Multi-tool ramming flow" +msgstr "Daugiafunkcinių įrankių tankinimo srautas" -msgid "The volume to be rammed before the toolchange." -msgstr "Il volume di ramming prima del cambio strumento." - -msgid "Multitool ramming flow" -msgstr "Flusso ramming multitool" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "Flusso usato per il ramming del filamento prima del cambio strumento." +msgid "Flow used for ramming the filament before the tool change." +msgstr "Srautas, naudojamas gijai įspausti prieš keičiant įrankį." msgid "Density" -msgstr "Densità" +msgstr "Tankis" -msgid "Filament density. For statistics only" -msgstr "Densità filamento, solo a fini statistici." +msgid "Filament density. For statistics only." +msgstr "Gijų tankis, tik statistikai." -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" -msgstr "Tipo di filamento" +msgid "The material type of filament." +msgstr "Gijos medžiagos tipas." msgid "Soluble material" -msgstr "Materiale solubile" +msgstr "Tirpi medžiaga" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" +"Tirpi medžiaga paprastai naudojama spausdinant atramą ir atramos sąsają." + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." msgstr "" -"Il materiale solubile viene comunemente utilizzato per stampare il supporto " -"e l'interfaccia di supporto" msgid "Support material" -msgstr "Materiale di supporto" +msgstr "Atramų medžiaga" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"Pagalbinė medžiaga paprastai naudojama pagalbinėms ir atraminėms sąsajoms " +"spausdinti." + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." msgstr "" -"Il materiale di supporto viene comunemente utilizzato per stampare il " -"supporto e le interfacce di supporto." msgid "Softening temperature" -msgstr "Temperatura di ammorbidimento" +msgstr "Minkštėjimo temperatūra" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" -"Il materiale si ammorbidisce a questa temperatura, quindi quando la " -"temperatura del letto è uguale o superiore ad essa, si consiglia vivamente " -"di aprire la porta d'ingresso e/o rimuovere il vetro superiore per evitare " -"ostruzioni." +"Esant tokiai temperatūrai medžiaga suminkštėja, todėl, kai pagrindo " +"temperatūra yra lygi arba didesnė už ją, labai rekomenduojama atidaryti " +"priekines dureles ir (arba) nuimti viršutinį stiklą, kad būtų išvengta " +"užsikimšimo." msgid "Price" -msgstr "Prezzo" +msgstr "Kaina" -msgid "Filament price. For statistics only" -msgstr "Prezzo del filamento, solo a fini statistici." +msgid "Filament price. For statistics only." +msgstr "Gijos kaina, tik statistikai." msgid "money/kg" -msgstr "soldi/kg" +msgstr "pinigų/kg" msgid "Vendor" -msgstr "Venditore" +msgstr "Pardavėjas" -msgid "Vendor of filament. For show only" -msgstr "Venditore di filamenti. Solo per lo spettacolo" +msgid "Vendor of filament. For show only." +msgstr "Gijos pardavėjas. Tik parodymui." msgid "(Undefined)" -msgstr "(Indefinito)" +msgstr "(Nenurodyta)" msgid "Sparse infill direction" -msgstr "" +msgstr "Reto užpildymo kryptis" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Questo è l'angolo della trama di riempimento che controlla l'inizio o la " -"direzione principale delle linee." +"Reto užpildymo rašto kampas, kuriuo nustatoma linijų pradžios arba " +"pagrindinė kryptis." msgid "Solid infill direction" -msgstr "" +msgstr "Vientiso užpildo kryptis" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" +"Vientiso užpildo rašto kampas, kuriuo nustatoma linijos pradžios arba " +"pagrindinė kryptis." msgid "Sparse infill density" -msgstr "Densità riempimento" +msgstr "Reto užpildymo tankis" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" -"Densità del riempimento sparso interno, 100% turns verrà utilizzato tutto il " -"riempimento sparso nel riempimento solido e il modello di riempimento solido " -"interno" +"Vidinio reto užpildymo tankis, 100% paverčia visą retą užpildymą vientisu " +"užpildymu, tuomet bus naudojamas vidinis vientiso užpildymo raštas." + +msgid "Align infill direction to model" +msgstr "Suderinti užpildymo kryptį su modeliu" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Suderina užpildymo ir paviršiaus užpildymo kryptis, kad jos atitiktų modelio " +"orientaciją ant spausdinimo plokštės. Kai ši funkcija įjungta, užpildymo " +"kryptys pasisuka kartu su modeliu, kad būtų išlaikytos optimalios stiprumo " +"charakteristikos." + +msgid "Insert solid layers" +msgstr "Įterpti vientisus sluoksnius" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Įterpkite vientisą užpildą tam tikruose sluoksniuose. Naudokite N, kad " +"įterptumėte kas N-tą sluoksnį, N#K, kad įterptumėte K iš eilės einančius " +"vientisus sluoksnius kas N sluoksnius (K yra neprivalomas, pvz., „5#“ yra " +"lygus „5#1“), arba kableliais atskirtą sąrašą (pvz., 1,7,9), kad įterptumėte " +"aiškiai nurodytuose sluoksniuose. Sluoksniai yra numeruojami nuo 1." + +msgid "Fill Multiline" +msgstr "Užpildyti kelias eilutes" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" +"Naudoti kelias linijas užpildymo šablonui, jei tai palaiko užpildymo " +"šablonas." msgid "Sparse infill pattern" -msgstr "Trama riempimento" +msgstr "Reto užpildymo raštas" -msgid "Line pattern for internal sparse infill" -msgstr "Questo è la trama lineare per il riempimento interno." +msgid "Line pattern for internal sparse infill." +msgstr "Vidinio reto užpildymo linijomis modelis." -msgid "Grid" -msgstr "Griglia" +msgid "Zig Zag" +msgstr "Zigzagas" + +msgid "Cross Zag" +msgstr "Sukryžiuotas zigzagas" + +msgid "Locked Zag" +msgstr "Surakintas zigzagas" msgid "Line" -msgstr "Linea" +msgstr "Linija" -msgid "Cubic" -msgstr "Cubico" +msgid "Grid" +msgstr "Tinklelis" msgid "Tri-hexagon" -msgstr "Tri-esagono" +msgstr "Trijų šešiakampių sistema" -msgid "Gyroid" -msgstr "Giroide" - -msgid "Honeycomb" -msgstr "Nido d'ape" +msgid "Cubic" +msgstr "Kubinis" msgid "Adaptive Cubic" -msgstr "Adattivo Cubico" +msgstr "Prisitaikantis kubinis" -msgid "3D Honeycomb" -msgstr "Nido d'ape 3D" +msgid "Quarter Cubic" +msgstr "Ketvirtis kubo" msgid "Support Cubic" -msgstr "Supporto cubico" +msgstr "Atrama kubinė" msgid "Lightning" -msgstr "Lightning" +msgstr "Apšvietimas" + +msgid "Honeycomb" +msgstr "Korys" + +msgid "3D Honeycomb" +msgstr "3D korys" + +msgid "Lateral Honeycomb" +msgstr "Šoninis korys" + +msgid "Lateral Lattice" +msgstr "2D grotelės" msgid "Cross Hatch" -msgstr "Cross Hatch" +msgstr "Kryžminis skliautas" + +msgid "TPMS-D" +msgstr "TPMS-D" + +msgid "TPMS-FK" +msgstr "TPMS-FK" + +msgid "Gyroid" +msgstr "Giroidas" + +msgid "Lateral lattice angle 1" +msgstr "Rašto kampas 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Pirmojo 2D grotelių elementų rinkinio kampas Z kryptimi. Nulis yra " +"vertikalus." + +msgid "Lateral lattice angle 2" +msgstr "Rašto kampas 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Antrojo 2D grotelių elementų rinkinio kampas Z kryptimi. Nulis yra " +"vertikalus." + +msgid "Infill overhang angle" +msgstr "Užpildymo iškyšos kampas" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "Užpildymo kampuoto linijų kampas. 60° kampas sukurs gryną korį." msgid "Sparse infill anchor length" -msgstr "Lunghezza dell'ancora di riempimento sparsa" +msgstr "Reto užpildo tvirtinimo ilgis" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11276,30 +13664,29 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" -"Collegare una linea di riempimento a un perimetro interno con un breve " -"segmento di un perimetro aggiuntivo. Se espresso in percentuale (esempio: " -"15%) viene calcolato sulla larghezza di estrusione del riempimento. Orca " -"Slicer tenta di collegare due linee di riempimento ravvicinate a un breve " -"segmento perimetrale. Se non viene trovato alcun segmento perimetrale più " -"corto di infill_anchor_max, la linea di riempimento viene collegata a un " -"segmento perimetrale su un solo lato e la lunghezza del segmento perimetrale " -"preso è limitata a questo parametro, ma non più lunga di " -"anchor_length_max. \n" -"Impostare questo parametro su zero per disabilitare i perimetri di " -"ancoraggio collegati a una singola linea di riempimento." +"Sujunkite užpildymo liniją su vidiniu perimetru trumpa papildomo perimetro " +"atkarpa. Jei išreiškiama procentais (pvz., 15 %), ji apskaičiuojama per " +"užpildymo ekstruzijos plotį. Programa \"Snapmaker Orca\" bando sujungti dvi " +"artimas užpildymo linijas su trumpu perimetro segmentu. Jei tokio perimetro " +"segmento, trumpesnio už infill_anchor_max, nerandama, užpildo linija " +"sujungiama su perimetro segmentu tik vienoje pusėje, o paimto perimetro " +"segmento ilgis apribojamas šiuo parametru, bet ne ilgesnis už " +"anchor_length_max.\n" +"Nustatykite šį parametrą lygų nuliui, jei norite išjungti perimetro, " +"sujungto su viena užpildo linija, įtvirtinimą." msgid "0 (no open anchors)" -msgstr "0 (senza ancore aperte)" +msgstr "0 (nėra atvirų tvirtinimų)" msgid "1000 (unlimited)" -msgstr "1000 (senza limiti)" +msgstr "1000 (neribota)" msgid "Maximum length of the infill anchor" -msgstr "Lunghezza massima dell'ancoraggio del riempimento" +msgstr "Maksimalus užpildymo tvirtinimų ilgis" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11309,166 +13696,172 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" -"Collegare una linea di riempimento a un perimetro interno con un breve " -"segmento di un perimetro aggiuntivo. Se espresso in percentuale (esempio: " -"15%) viene calcolato sulla larghezza di estrusione del riempimento. Orca " -"Slicer tenta di collegare due linee di riempimento ravvicinate a un breve " -"segmento perimetrale. Se non viene trovato alcun segmento perimetrale più " -"corto di questo parametro, la linea di riempimento viene collegata a un " -"segmento perimetrale su un solo lato e la lunghezza del segmento perimetrale " -"preso è limitata a infill_anchor, ma non più lunga di questo parametro. \n" -"Se impostato a 0, verrà utilizzato il vecchio algoritmo per la connessione " -"di riempimento, che dovrebbe creare lo stesso risultato di 1000 e 0." +"Sujunkite užpildymo liniją su vidiniu perimetru trumpa papildomo perimetro " +"atkarpa. Jei išreiškiama procentais (pvz., 15 %), ji apskaičiuojama per " +"užpildymo ekstruzijos plotį. Programa \"Snapmaker Orca\" bando sujungti dvi " +"artimas užpildymo linijas su trumpu perimetro segmentu. Jei tokio trumpesnio " +"už šį parametrą perimetro segmento nerandama, užpildo linija prijungiama " +"prie perimetro segmento tik vienoje pusėje, o paimto perimetro segmento " +"ilgis apribojamas iki infill_anchor, bet ne ilgesnis už šį parametrą.\n" +"Jei nustatyta 0, bus naudojamas senasis užpildymo sujungimo algoritmas, jis " +"turėtų sukurti tokį patį rezultatą kaip ir naudojant 1000 & 0." msgid "0 (Simple connect)" -msgstr "0 (Connessione semplice)" +msgstr "0 (paprastas prijungimas)" -msgid "Acceleration of outer walls" -msgstr "Accelerazione delle pareti esterne" +msgid "Acceleration of outer walls." +msgstr "Išorinių sienų pagreitis." -msgid "Acceleration of inner walls" -msgstr "Accelerazione delle pareti interne" +msgid "Acceleration of inner walls." +msgstr "Vidinių sienų pagreitis." -msgid "Acceleration of travel moves" -msgstr "Accelerazione massima per gli spostamenti" +msgid "Acceleration of travel moves." +msgstr "Judėjimo judesių pagreitis." msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" -"Questa è l'accelerazione del riempimento della superficie superiore. " -"L'utilizzo di un valore inferiore può migliorare la qualità della superficie " -"superiore." +"Viršutinio paviršiaus užpildymo pagreitis. Naudojant mažesnę vertę gali " +"pagerėti viršutinio paviršiaus kokybė." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" -"Accelerazione della parete esterna: l'utilizzo di un valore inferiore può " -"migliorare la qualità." +"Išorinės sienos pagreitis: naudojant mažesnę vertę galima pagerinti kokybę." msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." msgstr "" -"Accelerazione dei ponti. Se il valore è espresso in percentuale (ad es. " -"50%), verrà calcolato in base all'accelerazione della parete esterna." +"Tiltų pagreitis. Jei reikšmė išreikšta procentais (pvz., 50 %), ji bus " +"apskaičiuota pagal išorinės sienos pagreitį." msgid "mm/s² or %" -msgstr "mm/s o %" +msgstr "mm/s² arba %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Accelerazione del riempimento rado. Se il valore è espresso in percentuale " -"(ad esempio 100%), verrà calcolato in base all'accelerazione predefinita." +"Retų užpildų pagreitis. Jei reikšmė išreikšta procentais (pvz., 100 %), ji " +"bus apskaičiuota pagal numatytąjį pagreitį." msgid "" "Acceleration of internal solid infill. If the value is expressed as a " "percentage (e.g. 100%), it will be calculated based on the default " "acceleration." msgstr "" -"Accelerazione del riempimento solido interno. Se il valore è espresso in " -"percentuale (ad esempio 100%), verrà calcolato in base all'accelerazione " -"predefinita." +"Vidinio vientiso užpildo pagreitis. Jei reikšmė išreikšta procentais (pvz., " +"100 %), ji bus apskaičiuota pagal numatytąjį pagreitį." msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" -"Questa è l'accelerazione di stampa per il primo layer. L'uso di \n" -"un'accelerazione limitata può migliorare l'adesione sul piatto di stampa" +"Tai pirmojo sluoksnio spausdinimo pagreitis. Naudojant ribotą pagreitį " +"galima pagerinti sukibimą su pagrindu." msgid "Enable accel_to_decel" -msgstr "Abilita accel_to_decel" +msgstr "Įjungti accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "La max_accel_to_decel di Klipper verrà regolata automaticamente" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "\"Klipper\" max_accel_to_decel bus nustatytas automatiškai." msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." +msgstr "\"Klipper\" max_accel_to_decel bus pakoreguotas pagal šį pagreičio %%." + +msgid "Default jerk." +msgstr "Numatytasis trūkčiojimas." + +msgid "Junction Deviation" +msgstr "Sujungimo nuokrypis" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." msgstr "" -"La max_accel_to_decel di Klipper sarà adattata a questo %% di accelerazione" +"Marlin Firmware jungties nuokrypis (pakeičia tradicinį XY trūkčiojimo " +"nustatymą)." -msgid "Jerk of outer walls" -msgstr "Jerk delle pareti esterne" +msgid "Jerk of outer walls." +msgstr "Išorinių sienų trūkčiojimas." -msgid "Jerk of inner walls" -msgstr "Jerk delle pareti interne" +msgid "Jerk of inner walls." +msgstr "Vidinių sienų trūkčiojimas." -msgid "Jerk for top surface" -msgstr "Jerk per la superficie superiore" +msgid "Jerk for top surface." +msgstr "Viršutinio paviršiaus trūkčiojimas." -msgid "Jerk for infill" -msgstr "Jerk per riempimento" +msgid "Jerk for infill." +msgstr "Užpildymo trūkčiojimas." -msgid "Jerk for initial layer" -msgstr "Jerk per lo strato iniziale" +msgid "Jerk for initial layer." +msgstr "Pradinio sluoksnio trūkčiojimas." -msgid "Jerk for travel" -msgstr "Jerk per spostamento" +msgid "Jerk for travel." +msgstr "Judėjimo trūkčiojimas." msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Larghezza della linea del livello iniziale. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Pradinio sluoksnio linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas " +"pagal purkštuko skersmenį." msgid "Initial layer height" -msgstr "Altezza primo layer" +msgstr "Pradinio sluoksnio aukštis" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" -"Questa è l'altezza layer iniziale. L'aumento dell'altezza del primo layer " -"può migliorare l'adesione al piatto di stampa" +"Pradinio sluoksnio aukštis. Šiek tiek padidinus pradinio sluoksnio aukštį " +"galima pagerinti pagrindo plokštės sukibimą." -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "" -"Indica la velocità per il primo layer, tranne che per le sezioni di " -"riempimento solido." +"Greitis taikomas pirmajam sluoksniui, išskyrus vientiso užpildo ruožus." msgid "Initial layer infill" -msgstr "Riempimento primo layer" +msgstr "Pradinio sluoksnio užpildymas" -msgid "Speed of solid infill part of initial layer" -msgstr "Indica la velocità per le parti di riempimento solido del primo layer." +msgid "Speed of solid infill part of initial layer." +msgstr "Pirmojo sluoksnio vientiso užpildo dalių greitis." msgid "Initial layer travel speed" -msgstr "Velocità di spostamento del primo strato" +msgstr "Pradinio sluoksnio judėjimo greitis" -msgid "Travel speed of initial layer" -msgstr "Velocità di traslazione dello strato iniziale" +msgid "Travel speed of initial layer." +msgstr "Pradinio sluoksnio judėjimo greitis." msgid "Number of slow layers" -msgstr "Numero di livelli lenti" +msgstr "Viršutinių sąsajos sluoksnių skaičius" msgid "" "The first few layers are printed slower than normal. The speed is gradually " "increased in a linear fashion over the specified number of layers." msgstr "" -"I primi strati vengono stampati più lentamente del normale. La velocità " -"viene gradualmente aumentata in modo lineare sul numero di strati " -"specificato." +"Keli pirmieji sluoksniai spausdinami lėčiau nei įprastai. Greitis " +"palaipsniui linijiniu būdu didinamas per nurodytą sluoksnių skaičių." msgid "Initial layer nozzle temperature" -msgstr "Temperatura nozzle primo layer" +msgstr "Pradinė sluoksnio purkštuko temperatūra" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" -"Temperatura del nozzle per la stampa del primo layer con questo filamento" +"Purkštuko temperatūra pradiniam sluoksniui spausdinti, kai naudojama ši gija." msgid "Full fan speed at layer" -msgstr "Massima velocità della ventola al layer" +msgstr "Visas ventiliatoriaus greitis sluoksnyje" msgid "" "Fan speed will be ramped up linearly from zero at layer " @@ -11477,172 +13870,353 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"La velocità della ventola aumenterà linearmente da zero al livello " -"\"close_fan_the_first_x_layers\" al massimo al livello \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" verrà ignorato se inferiore a " -"\"close_fan_the_first_x_layers\", nel qual caso la ventola funzionerà alla " -"massima velocità consentita al livello \"close_fan_the_first_x_layers\" + 1." +"Ventiliatoriaus greitis bus didinamas tiesiškai nuo nulio sluoksnyje " +"\"close_fan_the_first_x_layers\" iki maksimalaus sluoksnyje " +"\"full_fan_speed_layer\". Į \"full_fan_speed_layer\" bus neatsižvelgiama, " +"jei jis bus mažesnis už \"close_fan_the_first_x_layers\"; tokiu atveju " +"ventiliatorius veiks didžiausiu leistinu greičiu sluoksnyje " +"\"close_fan_the_first_x_layers\" + 1." msgid "layer" -msgstr "" +msgstr "sluoksnis" msgid "Support interface fan speed" -msgstr "Supporta la velocità della ventola dell'interfaccia" +msgstr "Atramų sąsajos ventiliatoriaus greitis" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." msgstr "" -"Questa velocità della ventola viene applicata durante tutte le interfacce di " -"supporto, per essere in grado di indebolire il loro legame con un'elevata " -"velocità della ventola.\n" -"Impostare su -1 per disabilitare questa sostituzione.\n" -"Può essere sovrascritto solo da disable_fan_first_layers." +"Šis dalies aušinimo ventiliatoriaus greitis taikomas spausdinant atramines " +"sąsajas. Nustačius šį parametrą didesniu nei įprastai greičiu, sumažėja " +"sluoksnių surišimo stiprumas tarp atramų ir remiamos dalies, todėl jas " +"lengviau atskirti.\n" +"Nustatykite -1, kad išjungtumėte šį parametrą.\n" +"Šis parametras pakeičiamas parametru \"Išjungti pirmųjų sluoksnių aušinimą\"." + +msgid "Internal bridges fan speed" +msgstr "Vidinių tiltų ventiliatoriaus greitis" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Dalies aušinimo ventiliatoriaus greitis, naudojamas visiems vidiniams " +"tilteliams. Nustatykite į -1, kad vietoj to būtų naudojami iškyšos " +"ventiliatoriaus greičio nustatymai.\n" +"\n" +"Sumažinus vidinių tiltelių ventiliatoriaus greitį, palyginti su įprastu " +"ventiliatoriaus greičiu, galima sumažinti detalės deformaciją dėl per " +"didelio aušinimo, ilgą laiką taikomo dideliam paviršiui." + +msgid "Ironing fan speed" +msgstr "Lyginimo ventiliatoriaus greitis" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Šis dalies aušinimo ventiliatoriaus greitis taikomas lyginant. Nustačius šį " +"parametrą mažesniu nei įprastas greitis, sumažėja galimas purkštuko " +"užsikimšimas dėl mažo tūrinio srauto, todėl sąsaja tampa sklandesnė.\n" +"Norėdami išjungti, nustatykite -1." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"Questa impostazione fa vibrare casualmente la testa di stampa durante la " -"stampa su pareti, in modo che la superficie abbia un aspetto ruvido. Questa " -"impostazione controlla la posizione fuzzy Skin." +"Dėl šio nustatymo spausdinant sienas įrankio galvutė atsitiktinai trūkčioja, " +"todėl paviršius atrodo grublėtas. Šiuo nustatymu kontroliuojama grublėtumo " +"padėtis." msgid "Contour" -msgstr "Contorno" +msgstr "Kontūras" msgid "Contour and hole" -msgstr "Contorno e foro" +msgstr "Kontūras ir skylė" msgid "All walls" -msgstr "Tutte le pareti" +msgstr "Visos sienos" msgid "Fuzzy skin thickness" -msgstr "Spessore superficie crespa" +msgstr "Grublėto paviršiaus storis" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"Ampiezza del tremolio: si consiglia di mantenerla inferiore alla larghezza " -"della linea della parete esterna." +"Plotis, kurio ribose turi būti drebėjimas. Rekomenduojama, kad jis būtų " +"mažesnis už išorinės sienos linijos plotį." msgid "Fuzzy skin point distance" -msgstr "Distanza punti superficie crespa" +msgstr "Grublėto paviršiaus taško atstumas" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" -"La distanza media tra i punti casuali introdotti su ogni segmento di linea" +"Vidutinis atstumas tarp atsitiktinių taškų, įvestų kiekvienoje linijos " +"atkarpoje." msgid "Apply fuzzy skin to first layer" -msgstr "Applicare la pelle sfocata sul primo strato" +msgstr "Taikyti grublėtą paviršių pirmajam sluoksniui" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Se applicare la Superficie Crespa ( fuzzy skin) sul primo strato" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Ar taikyti grublėtą paviršių pirmajame sluoksnyje." + +msgid "Fuzzy skin generator mode" +msgstr "Grublėto paviršiaus generatoriaus režimas" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Grublėto paviršiaus generavimo režimas. Veikia tik su Arachne!\n" +"Perkėlimas: Klasikinis režimas, kai raštas formuojamas šoniniu purkštuvo " +"poslinkiu nuo pradinio kelio.\n" +"Ekstruzija: režimas, kai raštas formuojamas ekstruzuojamo plastiko kiekiu. " +"Tai greitas ir tiesus algoritmas be nereikalingo purkštuvo judėjimo, kuris " +"suteikia lygų raštą. Tačiau jis yra naudingesnis formuojant laisvas sienas " +"visame jų masyve.\n" +"Kombinuotas: jungtinis režimas [Perkėlimas] + [Ekstruzija]. Sienų išvaizda " +"yra panaši į [Perkėlimo] režimą, tačiau tarp perimetrų nelieka porų.\n" +"\n" +"Dėmesio! [Ekstruzijos] ir [Kombinuoto] režimai veikia tik tada, kai " +"parametras fuzzy_skin_thickness yra ne didesnis už spausdintos kilpos storį. " +"Tuo pačiu metu ekstruzijos plotis tam tikram sluoksniui taip pat neturėtų " +"būti mažesnis už tam tikrą lygį. Paprastai jis yra lygus 15–25%% sluoksnio " +"aukščio. Todėl maksimalus grublėto paviršiaus storis, kai perimetro plotis " +"yra 0,4 mm, o sluoksnio aukštis – 0,2 mm, bus 0,4-(0,2*0,25)=±0,35 mm! Jei " +"įvesite didesnį parametrą, bus rodomas klaidos pranešimas Flow::spacing(), o " +"modelis nebus supjaustytas. Galite parinkinėti šį skaičių, kol šios klaidos " +"neliks." + +msgid "Displacement" +msgstr "Perkėlimas" + +msgid "Extrusion" +msgstr "Ekstruzija" + +msgid "Combined" +msgstr "Kombinuotas" + +msgid "Fuzzy skin noise type" +msgstr "Grublėto paviršiaus nelygumų tipas" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Nelygumų tipas, kurį naudoti generuojant grublėtą paviršių.\n" +"Klasikinis: Klasikinis vienodas atsitiktinis triukšmas.\n" +"Perlin: Perlino triukšmas, kuris suteikia nuoseklesnę tekstūrą.\n" +"Billow: Panašus į Perlino triukšmą, bet gremėzdiškesnis.\n" +"Ridged Multifractal: Tai - rifliuotas triukšmas su aštriomis, dantytomis " +"savybėmis. Sukuria marmurines tekstūras.\n" +"Voronoi: Paviršius padalijamas į Voronoi ląsteles ir kiekviena iš jų " +"pasislenka atsitiktiniu dydžiu. Sukuriama mozaikinė tekstūra." + +msgid "Classic" +msgstr "Klasikinis" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Ridged Multifractal" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Grublėto paviršiaus elementų dydis" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Koherentinio triukšmo elementų bazinis dydis, mm. Didesnės reikšmės reiškia " +"didesnius elementus." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Grublėto paviršiaus nelygumų oktavos" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Koherentinio triukšmo oktavų skaičius, kuris bus naudojamas. Didesnės " +"reikšmės padidina triukšmo detalumą, tačiau taip pat pailgina skaičiavimo " +"laiką." + +msgid "Fuzzy skin noise persistence" +msgstr "Grublėto paviršiaus nelygumų patvarumas" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Aukštesnių oktavų koherentinio triukšmo silpnėjimo greitis. Dėl mažesnių " +"verčių triukšmas bus lygesnis." msgid "Filter out tiny gaps" -msgstr "Filtra i piccoli spazi vuoti" +msgstr "Filtruoti mažus tarpus" msgid "Layers and Perimeters" -msgstr "Layer e Perimetri" +msgstr "Sluoksniai ir perimetrai" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtra gli spazi più piccoli della soglia specificata" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Nespausdinti tarpo užpildymo, kurio ilgis yra mažesnis už nurodytą ribą " +"(mm). Šis nustatymas taikomas viršutiniam, apatiniam ir vientisam užpildui, " +"o jei naudojamas klasikinis perimetro generatorius - ir sienos tarpo " +"užpildymui." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" -"Indica la velocità per il riempimento del gap. I gap hanno solitamente una " -"larghezza linea irregolare e devono essere stampate più lentamente." +"Tarpų užpildymo greitis. Tarpai paprastai būna netaisyklingo pločio, todėl " +"juos reikia spausdinti lėčiau." msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "Tikslus Z aukštis" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." +"Įjunkite šią funkciją, jei norite gauti tikslų objekto z aukštį po " +"sluoksniavimo. Tikslus objekto aukštis bus gautas tiksliai nustatant kelių " +"paskutinių sluoksnių aukštį. Atkreipkite dėmesį, kad tai eksperimentinis " +"parametras." msgid "Arc fitting" -msgstr "Arc fitting" +msgstr "Lanko talpinimas" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" +"Įgalinkite šią funkciją, kad gautumėte G-kodo failą su G2 ir G3 judesiais. " +"Montavimo tolerancija yra tokia pati kaip skiriamoji geba.\n" +"\n" +"Pastaba: „Klipper“ mašinoms šią parinktį rekomenduojama išjungti. Klipper " +"neturi naudos iš lanko komandų, nes jas programinė įranga vėl suskaido į " +"linijų segmentus. Dėl to suprastėja paviršiaus kokybė, nes linijiniai " +"segmentai pjaustytuve paverčiami lankais, o programinėje įrangoje vėl " +"paverčiami linijiniais segmentais." msgid "Add line number" -msgstr "Aggiungi numero di riga" +msgstr "Pridėti eilutės numerį" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" -"Abilita questa opzione per aggiungere il numero di riga (Nx) all'inizio di " -"ogni riga del G-code" +"Įjunkite šią funkciją, kad kiekvienos G kodo eilutės pradžioje būtų įterptas " +"eilutės numeris (Nx)." msgid "Scan first layer" -msgstr "Scansiona Primo layer" +msgstr "Nuskaityti pirmąjį sluoksnį" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" -"Attivare questa opzione per consentire alla fotocamera della stampante di " -"verificare la qualità del primo layer." +"Įjunkite šią funkciją, kad spausdintuvo kamera būtų galima patikrinti " +"pirmojo sluoksnio kokybę." msgid "Nozzle type" -msgstr "Tipo di nozzle" +msgstr "Purkštuko tipas" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" -"Il materiale metallico del nozzle: determina la resistenza all'abrasione del " -"nozzle e il tipo di filamento che può essere stampato." +"Nuo purkštuko medžiagos priklauso antgalio atsparumas abrazyvui ir tai, " +"kokią giją galima spausdinti." msgid "Undefine" -msgstr "Indefinito" +msgstr "Neapibrėžti" msgid "Hardened steel" -msgstr "Acciaio temprato" +msgstr "Kietintas plienas" msgid "Stainless steel" -msgstr "Acciaio inox" +msgstr "Nerūdijantis plienas" + +msgid "Tungsten carbide" +msgstr "" msgid "Brass" -msgstr "Ottone" +msgstr "Žalvaris" msgid "Nozzle HRC" -msgstr "Nozzle HRC" +msgstr "Purkštuko HRC" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " "slicing." msgstr "" -"Durezza nozzle. Zero significa che non è necessario controllarla durante lo " -"slicing." +"Antgalio kietumas. Nulis reiškia, kad sluoksniavimo antgalio kietumas " +"netikrinamas." msgid "HRC" msgstr "HRC" msgid "Printer structure" -msgstr "Struttura della stampante" +msgstr "Spausdintuvo konstrukcija" -msgid "The physical arrangement and components of a printing device" -msgstr "La disposizione fisica e i componenti di un dispositivo di stampa" +msgid "The physical arrangement and components of a printing device." +msgstr "Spausdinimo įrenginio fizinis išdėstymas ir sudedamosios dalys." msgid "CoreXY" msgstr "CoreXY" @@ -11657,49 +14231,48 @@ msgid "Delta" msgstr "Delta" msgid "Best object position" -msgstr "Migliore posizione dell'oggetto" +msgstr "Geriausia objekto padėtis" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "" -"Migliore posizione di disposizione automatica nell'intervallo [0,1] w.r.t. " -"forma del letto." +"Geriausia automatinio išdėstymo padėtis intervale [0,1] pagal pagrindo formą." msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" -"Abilitare questa opzione se la macchina è dotata di ventola di " -"raffreddamento della parte ausiliaria. Comando G-code: M106 P2 S(0-255)." +"Įjunkite šią parinktį, jei mašinoje yra papildomas dalių aušinimo " +"ventiliatorius. G-kodo komanda: M106 P2 S(0-255)." msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"Avviare la ventola questo numero di secondi prima dell'ora di inizio " -"prevista (è possibile utilizzare i secondi frazionari). Si presume " -"un'accelerazione infinita per questa stima del tempo e si terrà conto solo " -"dei movimenti G1 e G0 (l'adattamento dell'arco non è supportato).\n" -"Non sposterà i comandi dei fan dai gcode personalizzati (agiscono come una " -"sorta di \"barriera\").\n" -"Non sposterà i comandi delle ventole nel gcode di avvio se è attivato " -"l'opzione \"solo gcode di avvio personalizzato\".\n" -"Utilizzare 0 per disattivare." +"Įjunkite ventiliatorių šiuo sekundžių skaičiumi anksčiau už jo tikslinį " +"paleidimo laiką (galite naudoti sekundžių dalis). Įvertinant šį laiką daroma " +"prielaida, kad pagreitis yra begalinis, ir atsižvelgiama tik į G1 ir G0 " +"judesius (lanko pritaikymas nepalaikomas).\n" +"Jis neperkelia ventiliatoriaus komandų iš pasirinktinių G-kodą (jie veikia " +"kaip tam tikras „barjeras“).\n" +"Jis neperkelia ventiliatoriaus komandų į pradžios G-kodą, jei įjungta " +"parinktis „tik pasirinktinis pradžios gkodas“.\n" +"Jei norite išjungti, naudokite 0." msgid "Only overhangs" -msgstr "Solo sporgenze" +msgstr "Tik iškyšos" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "Terrà conto solo del ritardo per il raffreddamento delle sporgenze." +msgstr "Atsižvelgs tik į iškyšų aušinimo vėlavimą." msgid "Fan kick-start time" -msgstr "Tempo di avvio della ventola" +msgstr "Ventiliatoriaus paleidimo laikas" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to " @@ -11708,120 +14281,283 @@ msgid "" "fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" -"Emettere un comando di velocità massima della ventola per questo numero di " -"secondi prima di ridurre la velocità target per avviare la ventola di " -"raffreddamento.\n" -"Ciò è utile per le ventole in cui un PWM/potenza bassa potrebbe essere " -"insufficiente per far partire la ventola da fermo o per far sì che la " -"ventola raggiunga la velocità più velocemente.\n" -"Impostare su 0 per disattivare." +"Šį kiekį sekundžių siunčia maksimalaus ventiliatoriaus greičio komandą, o po " +"to sumažina greitį, kad aušinimo ventiliatorius pradėtų veikti.\n" +"Tai naudinga ventiliatoriams, kai mažos PWM / galios gali nepakakti, kad " +"ventiliatorius pradėtų suktis nuo sustojimo, arba kad ventiliatorius " +"greičiau įsibėgėtų.\n" +"Nustatykite 0, kad išjungtumėte." msgid "Time cost" -msgstr "Costo orario" +msgstr "Laiko kaina" -msgid "The printer cost per hour" -msgstr "Il costo orario della stampante" +msgid "The printer cost per hour." +msgstr "Spausdintuvo valandos kaina." msgid "money/h" -msgstr "soldi/h" +msgstr "pinigai/h" msgid "Support control chamber temperature" -msgstr "Supporta la temperatura della camera di controllo" +msgstr "Kameros temperatūros kontrolės palaikymas" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" -"Questa opzione è abilitata se la macchina supporta il controllo della " -"temperatura della camera\n" -"Comando G-code: M141 S(0-255)" +"Ši parinktis įjungiama, jei mašina palaiko kameros temperatūros kontrolę.\n" +"G-kodo komanda: M141 S(0-255)" msgid "Support air filtration" -msgstr "Supporta la filtrazione dell'aria" +msgstr "Oro filtravimo palaikymas" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" -"Abilitare questa opzione se la stampante supporta il filtraggio dell'aria\n" -"Comando G-code: M106 P3 S(0-255)" +"Įjunkite šią funkciją, jei spausdintuvas palaiko oro filtravimą\n" +"G-kodo komanda: M106 P3 S(0-255)" msgid "G-code flavor" -msgstr "Formato G-code" +msgstr "G-kodo tipas" -msgid "What kind of gcode the printer is compatible with" -msgstr "Con che tipo di G-code è compatibile la stampante." +msgid "What kind of G-code the printer is compatible with." +msgstr "Su kokiu G kodu suderinamas spausdintuvas." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "Modifikuotas granulių spausdintuvas" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" +"Įjunkite šią parinktį, jei spausdintuve vietoj gijų naudojamos granulės." msgid "Support multi bed types" -msgstr "Supporta i tipi di letti multipli" +msgstr "Kelių tipų pagrindų palaikymas" -msgid "Enable this option if you want to use multiple bed types" -msgstr "Abilitare questa opzione se si desidera utilizzare più tipi di letto" +msgid "Enable this option if you want to use multiple bed types." +msgstr "Įjunkite šią parinktį, jei norite naudoti kelių tipų pagrindus." msgid "Label objects" -msgstr "Etichetta oggetti" +msgstr "Objektų žymėjimas" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Attivalo per aggiungere commenti nel G-Code etichettando i movimenti di " -"stampa secondo l'appartenenza, utile per il plugin Octoprint CancelObject. " -"Questa impostazione NON è compatibile con una configurazione Multi Material " -"ad estrusore singolo e con Pulitura nell'oggetto / Pulitura nel riempimento." +"Įgalinkite šią funkciją, jei norite pridėti komentarų prie G-kodo žymėjimo " +"spausdinimo judesių su objektu, kuriam jie priklauso. Tai naudinga " +"„Octoprint CancelObject“ papildiniui. Šie nustatymai NĖRA suderinami su " +"Vieno Ekstruderio Kelių Medžiagų sąranka ir Valyti Objekte / Valyti " +"Užpildyme." msgid "Exclude objects" -msgstr "Escludi oggetti" +msgstr "Išskirti objektus" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "" -"Abilita questa opzione per aggiungere il comando EXCLUDE OBJECT nel g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Įjunkite šią parinktį, kad G-kode būtų pridėta komanda EXCLUDE OBJECT." msgid "Verbose G-code" -msgstr "G-code verboso" +msgstr "Išsamus G-kodas" msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" -"Abilita per ottenere un file G-code commentato, con un testo descrittivo per " -"ciascuna linea. Se stampi da memoria SD, il peso aggiuntivo del file " -"potrebbe rallentare il firmware." +"Įjunkite tai, kad gautumėte komentuojamą G-kodo failą su kiekviena eilute " +"paaiškinta aprašomuoju tekstu. Jei spausdinate iš SD kortelės, dėl papildomo " +"failo dydžio gali sulėtėti veikimas." msgid "Infill combination" -msgstr "Combinazione riempimento" +msgstr "Užpildymo derinys" msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"Automatically combine sparse infill of several layers to print together in " -"order to reduce time. Walls are still printed with original layer height." +"Automatiškai sujungti kelių sluoksnių retą užpildą, kad būtų spausdinama " +"kartu ir sutrumpėtų laikas. Siena vis tiek spausdinama su pradiniu sluoksnio " +"aukščiu." + +msgid "Infill shift step" +msgstr "Užpildymo poslinkio žingsnis" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Šis parametras prideda nedidelį poslinkį kiekvienam užpildo sluoksniui, kad " +"būtų sukurta kryžminė tekstūra." + +msgid "Sparse infill rotation template" +msgstr "Retas užpildymo rotacijos šablonas" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Pasukite retą užpildymo kryptį pagal sluoksnį naudodami kampų šabloną. " +"Įveskite kableliais atskirtus laipsnius (pvz., „0,30,60,90“). Kampai taikomi " +"pagal sluoksnį ir kartojami, kai sąrašas baigiasi. Palaikoma išplėstinė " +"sintaksė: „+5“ pasuka +5° kiekviename sluoksnyje; „+5#5“ pasuka +5° kas 5 " +"sluoksnius. Daugiau informacijos rasite Wiki. Kai nustatytas šablonas, " +"standartinis užpildymo krypties nustatymas ignoruojamas. Pastaba: kai kurie " +"užpildymo modeliai (pvz., Gyroid) patys kontroliuoja pasukimą; naudokite " +"atsargiai." + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Vientiso užpildo pasukimo šablonas" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Šis parametras prideda kiekvienam sluoksniui vientiso užpildo krypties " +"pasukimą pagal nurodytą šabloną. Šablonas yra kableliais atskirtas kampų " +"laipsnių sąrašas, pvz., „0,90“. Pirmasis kampas taikomas pirmajam " +"sluoksniui, antrasis kampas – antrajam sluoksniui ir t. t. Jei sluoksnių yra " +"daugiau nei kampų, kampai bus kartojami. Atkreipkite dėmesį, kad ne visi " +"vientiso užpildo modeliai palaiko pasukimą." + +msgid "Skeleton infill density" +msgstr "Karkaso užpildymo tankis" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"Modelio kontūro dalis, likusi po tam tikro gylio pašalinimo nuo paviršiaus, " +"vadinama skeletu. Šis parametras naudojamas šio skirsnio tankiui reguliuoti. " +"Kai dvi sritys turi tuos pačius retų užpildų nustatymus, bet skirtingą " +"skeleto tankį, jų karkaso sritys susidurs su persidengiančiais skirsniais. " +"Numatytasis nustatymas yra toks pat kaip užpildų tankis." + +msgid "Skin infill density" +msgstr "Paviršiaus užpildymo tankis" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"Modelio išorinio paviršiaus dalis tam tikrame gylio intervale vadinama " +"paviršiumi. Šis parametras naudojamas šio skirsnio tankiui reguliuoti. Kai " +"dvi sritys turi tuos pačius retų užpildų nustatymus, bet skirtingą " +"paviršiaus tankį, ši sritis nebus padalyta į dvi atskiras sritis. " +"Numatytasis nustatymas yra toks pat kaip užpildų tankis." + +msgid "Skin infill depth" +msgstr "Paviršiaus užpildymo gylis" + +msgid "The parameter sets the depth of skin." +msgstr "Parametras nustato paviršiaus gylį." + +msgid "Infill lock depth" +msgstr "Užpildymo fiksavimo gylis" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "Šis parametras nustato vidaus ir išorės sluoksnių persidengimo gylį." + +msgid "Skin line width" +msgstr "Paviršiaus linijos plotis" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Nustatykite pasirinktų paviršiaus kontūrų linijų plotį." + +msgid "Skeleton line width" +msgstr "Karkaso linijos plotis" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Nustatykite pasirinktų karkaso kontūrų linijų plotį." + +msgid "Symmetric infill Y axis" +msgstr "Simetriškas užpildymas Y ašies" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Jei modelis turi dvi dalis, kurios yra simetriškos Y ašies atžvilgiu, ir " +"norite, kad šios dalys turėtų simetriškas tekstūras, spustelėkite šią " +"parinktį vienoje iš dalių." + +msgid "Infill combination - Max layer height" +msgstr "Užpildų derinys - Maksimalus sluoksnio aukštis" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Didžiausias kombinuoto reto užpildo sluoksnio aukštis.\n" +"\n" +"Nustatykite 0 arba 100 %, jei norite naudoti purkštuko skersmenį (kad " +"maksimaliai sutrumpėtų spausdinimo laikas), arba ~80 %, jei norite " +"maksimaliai padidinti reto užpildo stiprumą.\n" +"\n" +"Sluoksnių, per kuriuos derinamas užpildas, skaičius gaunamas dalijant šią " +"vertę iš sluoksnio aukščio ir suapvalinant žemyn iki artimiausio dešimtainio " +"skaičiaus.\n" +"\n" +"Naudokite absoliučias mm vertes (pvz., 0,32 mm 0,4 mm antgaliui) arba % " +"vertes (pvz., 80 %). Ši vertė neturi būti didesnė už purkštuko skersmenį." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" msgid "Filament to print internal sparse infill." -msgstr "Questo è il filamento per la stampa del riempimento interno." +msgstr "Gija, skirta spausdinti vidinį retą užpildą." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Larghezza della linea del riempimento interno sparso. Se espresso come %, " -"verrà calcolato sul diametro del nozzle." +"Vidinio reto užpildo linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas " +"pagal purkštuko skersmenį." msgid "Infill/Wall overlap" -msgstr "Sovrapposizione riempimento/parete" +msgstr "Užpildo ir sienos persidengimas" #, no-c-format, no-boost-format msgid "" @@ -11830,338 +14566,410 @@ msgid "" "value to ~10-15% to minimize potential over extrusion and accumulation of " "material resulting in rough top surfaces." msgstr "" +"Užpildo plotas šiek tiek padidintas, kad persidengtų su siena ir geriau " +"sukibtų. Procentinė vertė yra santykinė su reto užpildo linijos pločiu. " +"Nustatykite šią vertę ~10-15 %, kad sumažintumėte galimą perteklinį " +"išspaudimą ir medžiagos sankaupas, dėl kurių susidaro šiurkštus viršutinis " +"paviršius." msgid "Top/Bottom solid infill/wall overlap" -msgstr "" +msgstr "Viršutinio ir apatinio vientiso užpildo ir sienos persidengimas" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" +"Viršutinė vientiso užpildo sritis šiek tiek padidinta, kad geriau sutaptų su " +"siena ir kad viršutinio užpildo vietoje, kur jis jungiasi su sienomis, " +"atsirastų kuo mažiau skylučių. 25-30 % vertė yra geras pradinis taškas, " +"sumažinantis skylučių atsiradimą. Procentinė vertė yra santykinė su reto " +"užpildo linijos pločiu." -msgid "Speed of internal sparse infill" -msgstr "Indica la velocità del riempimento interno." +msgid "Speed of internal sparse infill." +msgstr "Vidinio reto užpildymo greitis." + +msgid "Inherits profile" +msgstr "Paveldi profilį" + +msgid "Name of parent profile." +msgstr "Pirminio profilio pavadinimas." msgid "Interface shells" -msgstr "Pareti interfaccia" +msgstr "Sąsajos apvalkalai" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Forza la generazione di perimetri solidi tra volumi o materiali adiacenti. " -"Utile per stampe multi estrusore con materiali traslucidi o supporti " -"solubili manuali" +"Priverstinai sukuriami vientisi apvalkalai tarp gretimų medžiagų ir (arba) " +"tūrių. Naudinga spausdinant daugiasluoksniais ekstruderiais su permatomomis " +"medžiagomis arba rankiniu būdu tirpiomis pagalbinėmis medžiagomis." msgid "Maximum width of a segmented region" -msgstr "Larghezza massima di una regione segmentata" +msgstr "Didžiausias segmentuotos srities plotis" msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "" -"Larghezza massima di una regione segmentata. Il valore zero disattiva questa " -"caratteristica." +msgstr "Didžiausias segmentuotos srities plotis. Nulis išjungia šią funkciją." msgid "Interlocking depth of a segmented region" -msgstr "Profondità di incastro di una regione segmentata" +msgstr "Segmentuotos srities susikirtimo gylis" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Profondità di incastro di una regione segmentata. Zero disabilita questa " -"funzione." +"Segmentuoto regiono susikirtimo gylis. Jis bus ignoruojamas, jei " +"„mmu_segmented_region_max_width“ yra nulis arba jei " +"„mmu_segmented_region_interlocking_depth“ yra didesnis už " +"„mmu_segmented_region_max_width“. Nulis išjungia šią funkciją." msgid "Use beam interlocking" -msgstr "" +msgstr "Naudoti pluošto blokavimą" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Vietose, kuriose liečiasi skirtingos gijos, sukurkite susisiekiančių sijų " +"struktūrą. Tai pagerina sukibimą tarp gijų, ypač modelių, atspausdintų iš " +"skirtingų medžiagų." msgid "Interlocking beam width" -msgstr "" +msgstr "Blokavimo sijų plotis" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "Susikertančių konstrukcijos sijų plotis." msgid "Interlocking direction" -msgstr "" +msgstr "Susiejimo kryptis" msgid "Orientation of interlock beams." -msgstr "" +msgstr "Blokavimo sijų kryptis." msgid "Interlocking beam layers" -msgstr "" +msgstr "Tarpusavyje besijungiantys sijų sluoksniai" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"Sujungtos konstrukcijos sijų aukštis, matuojamas sluoksnių skaičiumi. " +"Mažesnis sluoksnių skaičius yra tvirtesnis, bet labiau linkęs į defektus." msgid "Interlocking depth" -msgstr "" +msgstr "Blokavimo gylis" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"Atstumas nuo ribos tarp gijų iki susikertančios struktūros, matuojamas " +"ląstelėmis. Dėl per mažo ląstelių skaičiaus sukibimas bus silpnas." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Blokuotų ribų vengimas" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"Atstumas nuo modelio išorės, kai nesukuriamos susikertančios struktūros, " +"matuojamas ląstelėmis." msgid "Ironing Type" -msgstr "Tipo di stiratura" +msgstr "Lyginimo tipas" msgid "" "Ironing is using small flow to print on same height of surface again to make " "flat surface more smooth. This setting controls which layer being ironed" msgstr "" -"La stiratura utilizza un flusso ridotto per stampare alla stessa altezza di " -"una superficie per rendere le superfici piane più lisce. Questa impostazione " -"controlla quali layer vengono stirati." +"Lyginant naudojamas nedidelis srautas, kuris spausdina tame pačiame " +"paviršiaus aukštyje, kad plokšti paviršiai būtų lygesni. Šis nustatymas " +"kontroliuoja, kurie sluoksniai lyginami" msgid "No ironing" -msgstr "Non stirare" +msgstr "Nėra lyginimo" msgid "Top surfaces" -msgstr "Tutte le superfici superiori" +msgstr "Viršutiniai paviršiai" msgid "Topmost surface" -msgstr "Superficie superiore più alta" +msgstr "Aukščiausias paviršius" msgid "All solid layer" -msgstr "Tutti i layers solidi" +msgstr "Visas vientisas sluoksnis" msgid "Ironing Pattern" -msgstr "Trama stiratura" +msgstr "Lyginimo raštas" -msgid "The pattern that will be used when ironing" -msgstr "Il modello che verrà utilizzato durante la stiratura" +msgid "The pattern that will be used when ironing." +msgstr "Raštas, kuris bus naudojamas lyginant." msgid "Ironing flow" -msgstr "Flusso stiratura" +msgstr "Lyginimo srautas" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" -"Indica la quantità di materiale da estrudere durante la stiratura. È " -"relativo al flusso dell'altezza normale del layer. Un valore troppo alto " -"provoca una sovraestrusione sulla superficie." +"Medžiagos kiekis, kuris turi būti išspaustas lyginimo metu. Jis yra susijęs " +"su įprasto sluoksnio aukščio srautu. Dėl per didelės vertės paviršiuje " +"atsiras perteklinis išspaudimas." msgid "Ironing line spacing" -msgstr "Spaziatura linee di stiratura" +msgstr "Tarpai tarp lyginimo linijų" -msgid "The distance between the lines of ironing" -msgstr "Indica la distanza tra le linee utilizzate per la stiratura." +msgid "The distance between the lines of ironing." +msgstr "Atstumas tarp lyginimui naudojamų linijų." -msgid "Ironing speed" -msgstr "Velocità stiratura" - -msgid "Print speed of ironing lines" -msgstr "Indica la velocità di stampa per le linee di stiratura." - -msgid "Ironing angle" -msgstr "Angolo di stiratura" +msgid "Ironing inset" +msgstr "Lyginimo intarpas" msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." msgstr "" -"La stiratura angolare viene eseguita a. Un numero negativo disabilita questa " -"funzione e utilizza il metodo predefinito." +"Atstumas, kurį reikia išlaikyti nuo kraštų. Jei reikšmė 0, nustatoma pusė " +"purkštuko skersmens." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Ironing speed" +msgstr "Lyginimo greitis" + +msgid "Print speed of ironing lines." +msgstr "Lyginimo linijų spausdinimo greitis." + +msgid "Ironing angle offset" +msgstr "" + +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "Šis G kodas įterpiamas po kiekvieno sluoksnio keitimo po Z pakėlimo." + +msgid "Clumping detection G-code" msgstr "" -"Questo G-code viene inserito a ogni cambio di layer dopo l'elevazione z." msgid "Supports silent mode" -msgstr "Modalità silenziosa" +msgstr "Palaikomas tylusis režimas" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" -"Se la macchina supporta la modalità silenziosa, in cui la macchina utilizza " -"un'accelerazione inferiore per stampare in modo più silenzioso" +"Ar įrenginys palaiko tylųjį režimą, kai spausdindamas naudoja mažesnį " +"pagreitį." msgid "Emit limits to G-code" -msgstr "Limiti di emissione al codice G" +msgstr "Išsiųsti apribojimus į G-kodą" msgid "Machine limits" -msgstr "Limiti macchina" +msgstr "Mašinos ribos" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" -"Se abilitato, i limiti della macchina verranno emessi nel file G-code.\n" -"Questa opzione verrà ignorata se il sapore del codice g è impostato su " -"Klipper." +"Jei įjungta, įrenginio apribojimai bus perduodami į G-kodo failą.\n" +"Ši parinktis bus ignoruojama, jei g-kodo tipas nustatytas kaip Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" -"Questo G-code verrà utilizzato come codice pausa stampa. Gli utenti possono " -"inserire il G-code di pausa nel visualizzatore G-code." +"Šis G kodas bus naudojamas kaip pauzės spausdinimo kodas. Vartotojai gali " +"įterpti pauzės G kodą G kodo peržiūroje." -msgid "This G-code will be used as a custom code" -msgstr "Questo G-code verrà utilizzato come codice personalizzato" +msgid "This G-code will be used as a custom code." +msgstr "Šis G-kodas bus naudojamas kaip pasirinktinis kodas." msgid "Small area flow compensation (beta)" -msgstr "Compensazione del flusso su piccola area (beta)" +msgstr "Mažo ploto srauto kompensavimas (beta)" -msgid "Enable flow compensation for small infill areas" -msgstr "Abilita la compensazione del flusso per piccole aree di riempimento" +msgid "Enable flow compensation for small infill areas." +msgstr "Įgalinti srauto kompensavimą mažuose užpildymo plotuose." msgid "Flow Compensation Model" -msgstr "Modello di compensazione del flusso" +msgstr "Srauto kompensavimo modelis" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Modello di compensazione del flusso, utilizzato per regolare il flusso per " -"piccole aree di riempimento. Il modello è espresso come una coppia di valori " -"separati da virgole per la lunghezza di estrusione e i fattori di correzione " -"del flusso, uno per riga, nel seguente formato: \"1.234,5.678\"" +"Srauto kompensavimo modelis, naudojamas srautui mažose užpildymo srityse " +"reguliuoti. Modelis išreiškiamas kaip kableliu atskirtos ekstruzijos ilgio " +"ir srauto korekcijos koeficiento poros. Kiekviena pora yra atskiroje " +"eilutėje, po kurios eina kabliataškis, tokio formato: „1,234, 5,678;“." msgid "Maximum speed X" -msgstr "Velocità massima X" +msgstr "Didžiausias greitis X" msgid "Maximum speed Y" -msgstr "Velocità massima Y" +msgstr "Didžiausias greitis Y" msgid "Maximum speed Z" -msgstr "Velocità massima Z" +msgstr "Didžiausias greitis Z" msgid "Maximum speed E" -msgstr "Velocità massima E" +msgstr "Didžiausias greitis E" msgid "Maximum X speed" -msgstr "Velocità massima X" +msgstr "Didžiausias X greitis" msgid "Maximum Y speed" -msgstr "Velocità massima Y" +msgstr "Didžiausias Y greitis" msgid "Maximum Z speed" -msgstr "Velocità massima Z" +msgstr "Didžiausias Z greitis" msgid "Maximum E speed" -msgstr "Velocità massima E" +msgstr "Didžiausias E greitis" msgid "Maximum acceleration X" -msgstr "Accelerazione massima X" +msgstr "Didžiausias pagreitis X" msgid "Maximum acceleration Y" -msgstr "Accelerazione massima Y" +msgstr "Didžiausias pagreitis Y" msgid "Maximum acceleration Z" -msgstr "Accelerazione massima Z" +msgstr "Didžiausias pagreitis Z" msgid "Maximum acceleration E" -msgstr "Accelerazione massima E" +msgstr "Didžiausias pagreitis E" msgid "Maximum acceleration of the X axis" -msgstr "Accelerazione massima dell'asse X" +msgstr "Didžiausias X ašies pagreitis" msgid "Maximum acceleration of the Y axis" -msgstr "Accelerazione massima dell'asse Y" +msgstr "Didžiausias Y ašies pagreitis" msgid "Maximum acceleration of the Z axis" -msgstr "Accelerazione massima dell'asse Z" +msgstr "Didžiausias Z ašies pagreitis" msgid "Maximum acceleration of the E axis" -msgstr "Accelerazione massima dell'asse E" +msgstr "Didžiausias E ašies pagreitis" msgid "Maximum jerk X" -msgstr "Jerk massimo X" +msgstr "Didžiausias trūkčiojimas X" msgid "Maximum jerk Y" -msgstr "Jerk massimo Y" +msgstr "Didžiausias trūkčiojimas Y" msgid "Maximum jerk Z" -msgstr "Jerk massimo Z" +msgstr "Didžiausias trūkčiojimas Z" msgid "Maximum jerk E" -msgstr "Jerk massimo E" +msgstr "Didžiausias trūkčiojimas E" msgid "Maximum jerk of the X axis" -msgstr "Jerk massimo dell'asse X" +msgstr "Didžiausias X ašies trūkčiojimas" msgid "Maximum jerk of the Y axis" -msgstr "Jerk massimo dell'asse Y" +msgstr "Didžiausias Y ašies trūkčiojimas" msgid "Maximum jerk of the Z axis" -msgstr "Jerk massimo dell'asse Z" +msgstr "Didžiausias Z ašies trūkčiojimas" msgid "Maximum jerk of the E axis" -msgstr "Jerk massimo dell'asse E" +msgstr "Didžiausias E ašies trūkčiojimas" + +msgid "Maximum Junction Deviation" +msgstr "Maksimalus jungties nuokrypis" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" -msgstr "Velocità minima di estrusione" +msgstr "Mažiausias ekstruzijos greitis" msgid "Minimum speed for extruding (M205 S)" -msgstr "Velocità minima di estrusione (M205 S)" +msgstr "Minimum speed for extruding (M205 S)" msgid "Minimum travel speed" -msgstr "Velocità di spostamento minima" +msgstr "Mažiausias judėjimo greitis" msgid "Minimum travel speed (M205 T)" -msgstr "Velocità di spostamento minima (M205 T)" +msgstr "Mažiausias judėjimo greitis (M205 T)" msgid "Maximum acceleration for extruding" -msgstr "Accelerazione massima per l'estrusione" +msgstr "Didžiausias ekstruzijos pagreitis" msgid "Maximum acceleration for extruding (M204 P)" -msgstr "Accelerazione massima per l'estrusione (M204 P)" +msgstr "Didžiausias ekstruzijos pagreitis (M204 P)" msgid "Maximum acceleration for retracting" -msgstr "Accelerazione massima per la retrazione" +msgstr "Didžiausias įtraukimo pagreitis" msgid "Maximum acceleration for retracting (M204 R)" -msgstr "Accelerazione massima per retrazione (M204 R)" +msgstr "Didžiausias įtraukimo pagreitis (M204 R)" msgid "Maximum acceleration for travel" -msgstr "Accelerazione massima per spostamenti" +msgstr "Didžiausias judėjimo pagreitis" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" -"Accelerazione massima per la corsa (M204 T), si applica solo al Marlin 2" +"Didžiausias judėjimo pagreitis (M204 T), jis taikomas tik \"Marlin 2\"." + +msgid "Resonance avoidance" +msgstr "Rezonanso vengimas" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" +"Sumažinus išorinės sienos greitį, kad būtų išvengta spausdintuvo rezonanso " +"zonos, išvengiama modelio paviršiaus bangavimo.\n" +"Prašome išjungti šią parinktį, kai bandote bangavimą." + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." +msgstr "Minimalus greitis, leidžiantis išvengti rezonanso." + +msgid "Max" +msgstr "Maks" + +msgid "Maximum speed of resonance avoidance." +msgstr "Maksimalus greitis, leidžiantis išvengti rezonanso." msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" -"La velocità della ventola di raffreddamento può essere aumentata quando è " -"abilitato il raffreddamento automatico. Questa è la limitazione massima " -"della velocità della ventola di raffreddamento parziale" - -msgid "Max" -msgstr "Massimo" +"Kai įjungtas automatinis aušinimas, dalių ventiliatoriaus greitis gali būti " +"padidintas. Tai didžiausias dalių aušinimo ventiliatoriaus greitis." msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"L'altezza massima del layer stampabile per l'estrusore: viene utilizzata per " -"limitare l'altezza massima del layer quando è abilitato il layer adattativo." +"Didžiausias spausdinimo sluoksnio aukštis ekstruderiui. Naudojamas norint " +"apriboti maksimalų sluoksnio aukštį, kai įjungtas prisitaikantis sluoksnio " +"aukštis." msgid "Extrusion rate smoothing" -msgstr "Lisciatura del tasso di estrusione" +msgstr "Ekstruzijos greičio išlyginimas" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " @@ -12169,88 +14977,95 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -"Questo parametro attenua le variazioni improvvise della velocità di " -"estrusione che si verificano quando la stampante passa dalla stampa di " -"un'estrusione ad alto flusso (alta velocità/larghezza maggiore) a " -"un'estrusione a flusso inferiore (velocità inferiore/larghezza inferiore) e " -"viceversa.\n" +"Šis parametras išlygina staigius išspaudimo greičio pokyčius, kurie įvyksta " +"spausdintuvui pereinant nuo didelio srauto (didelio greičio / didesnio " +"pločio) išspaudimo prie mažesnio srauto (mažesnio greičio / mažesnio pločio) " +"išspaudimo ir atvirkščiai.\n" "\n" -"Definisce la velocità massima con cui la portata volumetrica estrusa in mm3/" -"sec può variare nel tempo. Valori più alti significano che sono consentite " -"variazioni più elevate della velocità di estrusione, con conseguenti " -"transizioni di velocità più rapide.\n" +"Jis apibrėžia didžiausią greitį, kuriuo gali kisti išspaustas tūrinis " +"srautas mm³/s. Didesnės vertės reiškia, kad leidžiami didesni ekstruzijos " +"greičio pokyčiai, todėl greitis pereina greičiau.\n" "\n" -"Il valore 0 disabilita la funzionalità. \n" +"Reikšmė 0 išjungia šią funkciją.\n" "\n" -"Per una stampante ad azionamento diretto ad alta velocità e ad alto flusso " -"(come Bambu lab o Voron) questo valore di solito non è necessario. Tuttavia, " -"può fornire alcuni vantaggi marginali in alcuni casi in cui le velocità " -"delle funzionalità variano notevolmente. Ad esempio, quando ci sono " -"rallentamenti aggressivi dovuti a strapiombi. In questi casi si consiglia un " -"valore elevato di circa 300-350 mm3/s2 in quanto ciò consente una levigatura " -"sufficiente per aiutare l'avanzamento della pressione a ottenere una " -"transizione di flusso più fluida.\n" +"Didelio greičio ir didelio srauto tiesioginės pavaros spausdintuvams (pvz., " +"\"Bambu lab\" arba \"Voron\") ši vertė paprastai nereikalinga. Tačiau tam " +"tikrais atvejais, kai funkcijos greičiai labai skiriasi, ji gali duoti " +"nedidelę naudą. Pavyzdžiui, kai yra agresyvių sulėtėjimų dėl iškyšų. Tokiais " +"atvejais rekomenduojama didelė vertė, maždaug 300-350 mm³/s² , nes tai " +"leidžia pakankamai išlyginti, kad padedant slėgio avansui būtų pasiektas " +"sklandesnis srauto perėjimas.\n" "\n" -"Per le stampanti più lente senza anticipo di pressione, il valore deve " -"essere impostato su un valore molto più basso. Un valore di 10-15 mm3/s2 è " -"un buon punto di partenza per gli estrusori a trasmissione diretta e di 5-10 " -"mm3/s2 per lo stile Bowden. \n" +"Lėtesniems spausdintuvams, kuriuose nėra slėgio didinimo, vertė turėtų būti " +"nustatyta daug mažesnė. Tiesioginės pavaros ekstruderiams gera pradinė vertė " +"yra 10-15 mm³/s², o Bowdeno tipo ekstruderiams - 5-10 mm³/s².\n" "\n" -"Questa funzione è nota come equalizzatore di pressione in Prusa slicer.\n" +"Ši funkcija \"Prusa\" programoje \"Prusa slicer\" vadinama slėgio išlyginimo " +"funkcija.\n" "\n" -"Nota: questo parametro disabilita l'adattamento dell'arco." - -msgid "mm³/s²" -msgstr "mm³/s²" +"Pastaba: šis parametras išjungia lanko tvirtinimą." msgid "Smoothing segment length" -msgstr "Levigatura della lunghezza del segmento" +msgstr "Išlyginamojo segmento ilgis" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Un valore più basso si traduce in transizioni più fluide della velocità di " -"estrusione. Tuttavia, ciò si traduce in un file gcode significativamente più " -"grande e in un maggior numero di istruzioni per l'elaborazione da parte " -"della stampante. \n" +"Mažesnė vertė užtikrina sklandesnius ekstruzijos greičio pokyčius. Tačiau " +"dėl to G kodo failas tampa žymiai didesnis, o spausdintuvas turi apdoroti " +"daugiau instrukcijų.\n" "\n" -"Il valore predefinito 3 funziona bene per la maggior parte dei casi. Se la " -"stampante balbetta, aumentare questo valore per ridurre il numero di " -"regolazioni effettuate\n" +"Daugeliu atvejų gerai tinka numatytoji vertė 3. Jei spausdintuvas " +"striginėja, padidinkite šią vertę, kad sumažintumėte atliekamų koregavimų " +"skaičių.\n" "\n" -"Valori consentiti: 1-5" +"Leidžiamos vertės: 0,5–5" -msgid "Minimum speed for part cooling fan" -msgstr "Velocità minima ventola di raffreddamento" +msgid "Apply only on external features" +msgstr "Taikyti tik išoriniams elementams" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Išspaudimo greičio išlyginimas taikomas tik išoriniams perimetrams ir " +"iškyšoms. Tai gali padėti sumažinti artefaktus, atsirandančius dėl staigių " +"greičio perėjimų išorėje matomose iškyšuose, nedarant poveikio elementų, " +"kurie nebus matomi naudotojui, spausdinimo greičiui." + +msgid "Minimum speed for part cooling fan." +msgstr "Mažiausias dalies aušinimo ventiliatoriaus greitis." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " @@ -12259,229 +15074,223 @@ msgid "" "Please enable auxiliary_fan in printer settings to use this feature. G-code " "command: M106 P2 S(0-255)" msgstr "" -"Velocità della ventola di raffreddamento della parte ausiliaria. La ventola " -"ausiliaria funzionerà a questa velocità durante la stampa, ad eccezione dei " -"primi strati, che sono definiti dall'assenza di strati di raffreddamento.\n" -"Abilitare auxiliary_fan nelle impostazioni della stampante per utilizzare " -"questa funzione. Comando G-code: M106 P2 S(0-255)" - -msgid "Min" -msgstr "Minimo" +"Pagalbinės dalies aušinimo ventiliatoriaus greitis. Pagalbinis " +"ventiliatorius veiks šiuo greičiu spausdinimo metu, išskyrus pirmuosius " +"kelis sluoksnius, kuriems netaikomas sluoksnių aušinimas.\n" +"Norėdami naudotis šia funkcija, spausdintuvo nustatymuose įjunkite " +"auxiliary_fan. G-kodo komanda: M106 P2 S(0-255)" msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"L'altezza minima del layer stampabile per l'estrusore. Viene utilizzata per " -"limitare l'altezza minima del layer quando è abilito il layer adattativo." +"Mažiausias spausdinimo sluoksnio aukštis ekstruderiui. Naudojamas norint " +"apriboti minimalų sluoksnio aukštį, kai įjungtas prisitaikantis sluoksnio " +"aukštis." msgid "Min print speed" -msgstr "Velocità minima di stampa" +msgstr "Minimalus spausdinimo greitis" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"La velocità di stampa minima a cui la stampante rallenterà per tentare di " -"mantenere il tempo minimo dello strato sopra, quando è abilitato il " -"rallentamento per un migliore raffreddamento dello strato." +"Mažiausias spausdinimo greitis, iki kurio spausdintuvas sulėtėja, kad " +"išlaikytų pirmiau apibrėžtą minimalų sluoksnio laiką, kai įjungtas " +"sulėtinimas dėl geresnio sluoksnių aušinimo." -msgid "Nozzle diameter" -msgstr "Diametro Nozzle" - -msgid "Diameter of nozzle" -msgstr "Diametro del nozzle" +msgid "The diameter of nozzle." +msgstr "Purkštuvo skersmuo." msgid "Configuration notes" -msgstr "Note di configurazione" +msgstr "Konfigūracijos pastabos" msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" -"Qui è possibile inserire le note personali. Questo testo verrà aggiunto nei " -"commenti iniziali del G-code." +"Čia galite įdėti savo asmeninius užrašus. Šis tekstas bus pridėtas prie G " +"kodo antraštės komentarų." msgid "Host Type" -msgstr "Tipo host" +msgstr "Hosto tipas" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." msgstr "" -"Snapmaker Orca può caricare file G-code su un host di stampa. Questo campo deve " -"contenere il tipo di host." +"\"Snapmaker Orca\" gali įkelti G-kodo failus į spausdintuvą. Šiame lauke turi " +"būti įrašyta įrenginio rūšis." msgid "Nozzle volume" -msgstr "Volume del nozzle" +msgstr "Purkštuko tūris" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Volume del nozzle tra taglierina ed estremità nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Purkštuko tūris tarp pjaustytuvo ir purkštuko galo." msgid "Cooling tube position" -msgstr "Posizione tubo di raffreddamento" +msgstr "Aušinimo vamzdžio padėtis" msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "" -"Distanza del centro del tubo di raffreddamento dalla punta dell'estrusore." +msgstr "Aušinimo vamzdžio centro taško atstumas nuo ekstruderio antgalio." msgid "Cooling tube length" -msgstr "Lunghezza del tubo di raffreddamento" +msgstr "Aušinimo vamzdžio ilgis" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" -"Lunghezza del tubo di raffreddamento per limitare lo spazio per i movimenti " -"di raffreddamento al suo interno." +"Aušinimo vamzdžio ilgis, kad būtų apribota erdvė aušinimo judesiams viduje." msgid "High extruder current on filament swap" -msgstr "Alta corrente estrusore al cambio filamento" +msgstr "Didelė ekstruderio srovė keičiant giją" msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Potrebbe essere utile aumentare la corrente del motore estrusore durante la " -"sequenza di cambio filamento per permettere un avanzamento rapido del " -"ramming e per superare la resistenza durante il caricamento di un filamento " -"con una punta deformata." +"Gali būti naudinga padidinti ekstruderio variklio srovę vykstant gijos " +"keitimo sekai, kad būtų užtikrintas greitas tiekimo greitis ir įveiktų " +"pasipriešinimą apkraunant giją su netipinės formos antgaliu." msgid "Filament parking position" -msgstr "Posizione di parcheggio del filamento" +msgstr "Gijos stovėjimo padėtis" msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Distanza della punta dell'estrusore dalla posizione dove il filamento viene " -"posto mentre viene scaricato. Dovrebbe essere uguale al valore nel firmware " -"della stampante." +"Ekstruderio antgalio atstumas nuo padėties, kurioje gija yra pastatyta, kai " +"ji išimama. Tai turėtų atitikti spausdintuvo programinės įrangos reikšmę." msgid "Extra loading distance" -msgstr "Distanza di caricamento aggiuntiva" +msgstr "Papildomas pakrovimo atstumas" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" -"Quando impostato a zero, la distanza percorsa dal filamento in posizione di " -"parcheggio durante il caricamento è esattamente uguale a quella contraria " -"durante lo scaricamento. Quando il valore è positivo, viene caricato " -"maggiormente, se il valore è negativo il movimento di caricamento è più " -"corto dello scaricamento." +"Nustačius nulį, atstumas, kuriuo gija išleidžiama iš stovėjimo padėties " +"įdėjimo metu, yra lygiai toks pat, koks buvo perkeltas atgal išėmimo metu. " +"Jei parametras teigiamas, įdėjimo atstumas didesnis, jei neigiamas, - " +"įdėjimo atstumas yra mažesnis nei išėmimo." msgid "Start end points" -msgstr "Punti iniziali e finali" +msgstr "Pradžios ir pabaigos taškai" msgid "The start and end points which is from cutter area to garbage can." msgstr "" -"I punti di partenza e arrivo che si trovano dall'area del taglio allo " -"scarico." +"Pradžios ir pabaigos taškai, t. y. nuo pjaustymo zonos iki šiukšliadėžės." msgid "Reduce infill retraction" -msgstr "Riduci la retrazione nel riempimento" +msgstr "Sumažinti užpildų įtraukimą" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" -"Non ritrarre quando gli spostamenti si trovano interamente ad un'area di " -"riempimento. Ciò significa che il gocciolamento non verrà visto. Questo può " -"ridurre i tempi di ritrazione per i modelli complessi e far risparmiare " -"tempo di stampa, ma rende lo slicing e la generazione del G-code più lento." +"Neįtraukti, kai judėjimas vyksta tik užpildytoje zonoje. Tai reiškia, kad " +"ištekėjimo nematyti. Tai gali sutrumpinti įtraukimo laiką sudėtingam " +"modeliui ir sutaupyti laiką spausdinimui, tačiau sluoksniavimas ir G kodo " +"generavimas bus lėtesni." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Pasirinkus šią parinktį sumažės neaktyvių ekstruderių temperatūra, kad būtų " +"išvengta išsiliejimo." msgid "Filename format" -msgstr "Formato nome file" +msgstr "Failų pavadinimų formatas" -msgid "User can self-define the project file name when export" -msgstr "" -"Gli utenti possono decidere i nomi dei file progetto nell'esportazione." +msgid "Users can define the project file name when exporting." +msgstr "Eksportuodami vartotojai gali pasirinkti projekto failų pavadinimus." msgid "Make overhangs printable" -msgstr "Rendi stampabile la sporgenza" +msgstr "Padaryti iškyšas spausdinamas" msgid "Modify the geometry to print overhangs without support material." msgstr "" -"Modificare la geometria per stampare sporgenze senza materiale di supporto." +"Pakeisti geometriją, kad būtų galima spausdinti iškyšas be atraminės " +"medžiagos." msgid "Make overhangs printable - Maximum angle" -msgstr "Rendi la sporgenza stampabile angolo massimo" +msgstr "Spausdintinos iškyšos - Didžiausias kampas" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"Angolo massimo delle sporgenze da consentire dopo aver reso stampabili " -"sporgenze più ripide.90° non cambierà affatto il modello e consentirà alcuna " -"sporgenza, mentre 0 sostituirà tutte le sporgenze con materiale conico." +"Didžiausias leistinas iškyšų kampas, kurį galima spausdinti padarius " +"statesnes iškyšas. 90° visiškai nepakeis modelio ir leis bet kokią iškyšą, o " +"0 - visas iškyšas pakeis kūgio formos medžiaga." msgid "Make overhangs printable - Hole area" -msgstr "Rendere stampabile l'area del foro sporgente" +msgstr "Spausdintinos iškyšos - Skylės plotas" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -"Area massima di un foro nella base del modello prima che venga riempito da " -"materiale conico. Un valore pari a 0 riempirà tutti i fori nella base del " -"modello." - -msgid "mm²" -msgstr "mm²" +"Didžiausias modelio pagrindo skylės plotas prieš ją užpildant kūgine " +"medžiaga. 0 reikšmė užpildys visas modelio pagrindo skyles." msgid "Detect overhang wall" -msgstr "Rileva parete a sbalzo" +msgstr "Aptikti išsikišusią sieną" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Rileva la percentuale di sporgenza rispetto alla larghezza della linea e " -"utilizza velocità diverse per stampare. Per una sporgenza di 100%%, viene " -"utilizzata la velocità del ponte." +"Nustatykite iškyšos procentinę dalį, palyginti su linijos pločiu, ir " +"naudokite skirtingą spausdinimo greitį. Jei iškyša 100%%, naudojamas tilto " +"greitis." + +msgid "Filament to print walls." +msgstr "Gijos sienoms spausdinti." msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea della parete interna. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Vidinės sienos linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas pagal " +"purkštuko skersmenį." -msgid "Speed of inner wall" -msgstr "Indica la velocità per le pareti interne." +msgid "Speed of inner wall." +msgstr "Tai vidinių sienų greitis." -msgid "Number of walls of every layer" -msgstr "Questo è il numero di pareti per layer." +msgid "Number of walls of every layer." +msgstr "Vieno sluoksnio sienų skaičius." msgid "Alternate extra wall" -msgstr "Parete Aggiuntiva Alternativa" +msgstr "Alternatyvi papildoma siena" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" -"Questa impostazione aggiunge un muro extra a ogni altro livello. In questo " -"modo il riempimento si incastra verticalmente tra le pareti, ottenendo " -"stampe più resistenti. \n" +"Šis nustatymas prie kiekvieno kito sluoksnio prideda papildomą sienelę. Taip " +"užpildas vertikaliai įsiterpia tarp sienelių, todėl atspaudai tampa " +"tvirtesni.\n" "\n" -"Quando questa opzione è abilitata, l'opzione Garantisci spessore verticale " -"del guscio deve essere disabilitata. \n" +"Kai ši parinktis įjungta, reikia išjungti parinktį Užtikrinti vertikalų " +"apvalkalo storį.\n" "\n" -"L'utilizzo del riempimento fulmineo insieme a questa opzione non è " -"raccomandato in quanto il riempimento è limitato a cui ancorare i perimetri " -"extra." +"Naudoti žaibo užpildą kartu su šia parinktimi nerekomenduojama, nes yra " +"nedaug užpildo, prie kurio būtų galima pritvirtinti papildomą perimetrą." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -12490,304 +15299,333 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" -"Se vuoi processare il G-code in uscita con script personalizzati, basta " -"elencare qui il loro percorso assoluto. Separa i diversi script con un punto " -"e virgola. Gli script passeranno il percorso assoluto nel G-code come primo " -"argomento, e potranno accedere alle impostazioni di configurazione di Orca " -"Slicer leggendo le variabili di ambiente." +"Jei norite apdoroti išvesties G-kodą naudodami pasirinktinius scenarijus, " +"tiesiog nurodykite jų absoliučius kelius. Keletą scenarijų atskirkite " +"kabliataškiu. Skriptams kaip pirmasis argumentas bus perduotas absoliutus " +"kelias iki G-kodo failo ir jie galės pasiekti \"Snapmaker Orca\" konfigūracijos " +"nustatymus skaitydami aplinkos kintamuosius." + +msgid "Printer type" +msgstr "Spausdintuvo tipas" + +msgid "Type of the printer." +msgstr "Spausdintuvo tipas." msgid "Printer notes" -msgstr "Note stampante" +msgstr "Spausdintuvo užrašai" msgid "You can put your notes regarding the printer here." -msgstr "È possibile inserire qui le note riguardanti la stampante." +msgstr "Čia galite pridėti pastabas apie spausdintuvą." + +msgid "Printer variant" +msgstr "Spausdintuvo variantas" msgid "Raft contact Z distance" -msgstr "Distanza di contatto Z Raft" +msgstr "Platformos kontakto Z atstumas" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" -"Indica lo spazio Z tra oggetto e raft. Viene ignorato per le interfacce " -"solubili." +"Z tarpas tarp objekto ir platformos. Į jį neatsižvelgiama tirpių sąsajų " +"atveju." msgid "Raft expansion" -msgstr "Espansione del raft" +msgstr "Platformos išplėtimas" -msgid "Expand all raft layers in XY plane" -msgstr "Questo espande tutti i layer del raft nel piano XY." +msgid "Expand all raft layers in XY plane." +msgstr "Tai išplečia visus platformos sluoksnius XY plokštumoje." msgid "Initial layer density" -msgstr "Densità primo layer" +msgstr "Pradinio sluoksnio tankis" -msgid "Density of the first raft or support layer" -msgstr "Questa è la densità del raft o del layer di supporto." +msgid "Density of the first raft or support layer." +msgstr "Pirmojo platformos arba atraminio sluoksnio tankis." msgid "Initial layer expansion" -msgstr "Espansione primo layer" +msgstr "Pradinio sluoksnio išplėtimas" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" -"Questo espande il primo raft o layer di supporto per migliorare l'adesione " -"al piatto." +"Kad pagerėtų sukibimas su pagrindu, išplečiamas pirmasis platformos arba " +"atraminis sluoksnis." msgid "Raft layers" -msgstr "Layer raft" +msgstr "Platformos sluoksniai" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"L'oggetto verrà sollevato da questo numero di layer di supporto. Utilizzare " -"questa funzione per evitare deformazioni durante la stampa di ABS." +"Objektas bus padidintas šiuo atraminių sluoksnių skaičiumi. Šią funkciją " +"naudokite norėdami išvengti deformacijų spausdinant ABS." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" -"Il percorso del G-code viene generato dopo aver semplificato il contorno del " -"modello per evitare molti punti e linee nel file G-code.\n" -"Un valore più piccolo significa una risoluzione più elevata e un tempo " -"maggiore per l'elaborazione" +"G kodo kelias generuojamas supaprastinus modelių kontūrus, kad būtų išvengta " +"pernelyg didelio taškų ir G kodo linijų skaičiaus. Mažesnė vertė reiškia " +"didesnę skiriamąją gebą ir ilgesnį sluoksniavimo laiką." msgid "Travel distance threshold" -msgstr "Soglia distanza di spostamento" +msgstr "Judėjimo atstumo riba" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" -"L'attivazione della retrazione avviene solo quando la distanza percorsa è " -"superiore a questa soglia." +"Įtraukimas įjungiamas tik tada, kai judėjimo atstumas yra ilgesnis už šią " +"ribą." msgid "Retract amount before wipe" -msgstr "Retrai la quantità prima di pulire" +msgstr "Įtraukiamas kiekis prieš nuvalymą" msgid "" -"The length of fast retraction before wipe, relative to retraction length" -msgstr "" -"Indica la lunghezza della retrazione rapida prima di una pulizia, rispetto " -"alla lunghezza di retrazione." +"The length of fast retraction before wipe, relative to retraction length." +msgstr "Greito įtraukimo prieš nuvalymą ilgis, palyginti su įtraukimo ilgiu." msgid "Retract when change layer" -msgstr "Ritrai al cambio layer" +msgstr "Įtraukti, kai keičiamas sluoksnis" -msgid "Force a retraction when changes layer" -msgstr "Questo forza una retrazione nei cambi layer." +msgid "Force a retraction when changes layer." +msgstr "Priverstinis įtraukimas, kai keičiasi sluoksnis." msgid "Retraction Length" -msgstr "Lunghezza Retrazione" +msgstr "Įtraukimo ilgis" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Indica la quantità filamento nell'estrusore che viene ritirata per evitare " -"la trasudazione durante le lunghe distanze. Imposta su 0 per disattivare la " -"retrazione." +"Tam tikras kiekis medžiagos ekstruderyje yra įtraukiamas atgal, kad ilgos " +"kelionės metu nesusidarytų išsiliejimas. Nustatykite nulį, kad išjungtumėte " +"įtraukimą." -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Ilgas įtraukimas, kai pjaunama (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." +"Eksperimentinė funkcija: Pakeitimų metu gija įtraukiama ir nukerpama " +"didesniu atstumu, kad būtų sumažintas išleidimas. Nors tai gerokai sumažina " +"išleidimą, taip pat gali padidėti purkštukų užsikimšimo ar kitų spausdinimo " +"problemų rizika." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "Įtraukimo atstumas, kai kerpama" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" -msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." +msgstr "Eksperimentinė savybė: Įtraukimo ilgis prieš nupjaunant keičiant giją." -msgid "Z hop when retract" -msgstr "Z hop in fase retrazione" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Z šuolio aukštis" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Ogni volta che si verifica una retrazione, il nozzle viene sollevato " -"leggermente per creare spazio tra nozzle e stampa. Ciò impedisce al nozzle " -"di colpire la stampa quando si viaggia di più. L'uso di linee a spirale per " -"sollevare z può evitare che si stringano." +"Kiekvieną kartą, kai gija įtraukiama, purkštukas šiek tiek pakeliamas, kad " +"tarp purkštuko ir spaudinio atsirastų tarpas. Taip purkštukas, judėdamas " +"daugiau, neužkliudo spaudinio. Naudojant spiralines linijas z pakėlimui, " +"galima išvengti stygų susidarymo." -msgid "Z hop lower boundary" -msgstr "Limite inferiore dell'hop Z" +msgid "Z-hop lower boundary" +msgstr "Z šuolio apatinė riba" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"L'hop Z avrà effetto solo quando Z è al di sopra di questo valore e si trova " -"al di sotto del parametro: \"Limite superiore dell'hop Z\"" +"Z šuolis pradės veikti tik tada, kai Z bus didesnis už šią vertę ir mažesnis " +"už parametrą: \"Z šuolio viršutinė riba\"." -msgid "Z hop upper boundary" -msgstr "Limite superiore dell'hop Z" +msgid "Z-hop upper boundary" +msgstr "Z šuolio viršutinė riba" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Se questo valore è positivo, l'hop Z avrà effetto solo quando Z si trova al " -"di sopra del parametro: \"Z hop lower boundary\" ed è al di sotto di questo " -"valore" +"Jei ši vertė yra teigiama, Z-šuolis įsigalios tik tada, kai Z yra virš " +"parametro „Z-šuolio apatinė riba“ ir yra žemiau šios vertės." -msgid "Z hop type" -msgstr "Tipo Z Hop" +msgid "Z-hop type" +msgstr "Z šuolio tipas" + +msgid "Type of Z-hop." +msgstr "Z-šuolio tipas." msgid "Slope" -msgstr "Inclinato" +msgstr "Nuolydis" msgid "Spiral" -msgstr "Spirale" +msgstr "Spiralė" msgid "Traveling angle" -msgstr "" +msgstr "Judėjimo kampas" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Šlaito ir spiralės Z-šuolio tipo judėjimo kampas. Nustačius jį į 90°, " +"gaunamas normalus pakėlimas." msgid "Only lift Z above" -msgstr "Solleva Z solo al di sopra" +msgstr "Pakelti tik Z aukščiau" msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z." msgstr "" -"Se si imposta questo valore su un valore positivo, l'aumento Z si " -"verificherà solo al di sopra dello Z assoluto specificato." +"Jei nustatysite teigiamą reikšmę, Z kėlimas bus vykdomas tik virš nurodytos " +"absoliučiosios Z reikšmės." msgid "Only lift Z below" -msgstr "Solleva Z solo al di sotto" +msgstr "Pakelti tik Z žemiau" msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z." msgstr "" -"Se si imposta questo valore su un valore positivo, l'aumento Z si " -"verificherà solo al di sotto dello Z assoluto specificato." +"Jei nustatysite teigiamą reikšmę, Z kėlimas bus vykdomas tik žemiau " +"nurodytos absoliučiosios Z reikšmės." msgid "On surfaces" -msgstr "Tutte le superfici superiori" +msgstr "Ant paviršių" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"Applicare il comportamento Z Hop. Questa impostazione è influenzata dalle " -"impostazioni di cui sopra (solo sollevare Z sopra/sotto)." +"Užtikrinkite \"Z šuolio\" elgesį. Šiam nustatymui įtakos turi pirmiau " +"nurodyti nustatymai (tik pakelti Z virš/žemiau)." msgid "All Surfaces" -msgstr "Tutte le Superfici" +msgstr "Visi paviršiai" msgid "Top Only" -msgstr "Solo sopra" +msgstr "Tik viršus" msgid "Bottom Only" -msgstr "Solo sotto" +msgstr "Tik apačia" msgid "Top and Bottom" -msgstr "Sopra e Sotto" +msgstr "Viršus ir apačia" + +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" msgid "Extra length on restart" -msgstr "Lunghezza extra in ripresa" +msgstr "Papildomas ilgis paleidus iš naujo" msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Quando la retrazione è compensata dopo un movimento di spostamento, " -"l'estrusore spingerà questa quantità addizionale di filamento. Questa " -"impostazione è raramente necessaria." +"Kai įtraukimas kompensuojamas po judesio, ekstruderis išstums šį papildomą " +"gijos kiekį. Šis nustatymas reikalingas retai." msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" -"Quando la retrazione è compensata dopo un cambio strumento, l'estrusore " -"spingerà questa quantità addizionale di filamento." +"Kai atitraukimas kompensuojamas pakeitus įrankį, ekstruderis išstums šį " +"papildomą gijos kiekį." msgid "Retraction Speed" -msgstr "Velocità di retrazione" +msgstr "Įtraukimo greitis" -msgid "Speed of retractions" -msgstr "Indica la velocità di retrazione." +msgid "Speed for retracting filament from the nozzle." +msgstr "Gijos įtraukimo į purkštuką greitis." -msgid "Deretraction Speed" -msgstr "Velocità di deretrazione" +msgid "De-retraction Speed" +msgstr "Atitraukimo greitis" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"La velocità di ricarica filamento nell'estrusore dopo una retrazione; " -"impostando 0, la velocità sarà la stessa della retrazione." +"Gijos įtraukimo į purkštuką greitis. Nulis reiškia tokį patį ištraukimo " +"greitį." msgid "Use firmware retraction" -msgstr "Usa retrazione firmware" +msgstr "Naudoti nustatytąjį įtraukimą" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" -"Questa impostazione sperimentale utilizza i comandi G10 e G11 per fare in " -"modo che il firmware gestisca la ritrazione. Questo è supportato solo nel " -"recente Marlin." +"Šis eksperimentinis nustatymas naudoja G10 ir G11 komandas, kad programinė " +"įranga valdytų įtraukimą. Tai palaikoma tik naujausioje „Marlin“." msgid "Show auto-calibration marks" -msgstr "Mostra segni di autocalibrazione" +msgstr "Rodyti automatinio kalibravimo ženklus" msgid "Disable set remaining print time" -msgstr "Disabilita il tempo di stampa rimanente impostato" +msgstr "Išjungti nustatytą likusį spausdinimo laiką" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" +"Išjungti M73 generavimą: Nustatyti likusį spausdinimo laiką galutiniame G " +"kode." msgid "Seam position" -msgstr "Posizione della cucitura" +msgstr "Siūlės padėtis" -msgid "The start position to print each part of outer wall" -msgstr "Indica la posizione di partenza per ogni parte della parete esterna." +msgid "The start position to print each part of outer wall." +msgstr "Kiekvienos išorinės sienos dalies pradinė padėtis." msgid "Nearest" -msgstr "Più vicino" +msgstr "Artimiausia" msgid "Aligned" -msgstr "Allineato" +msgstr "Sulygiuota" + +msgid "Aligned back" +msgstr "Sulygiuotos galinės dalys" msgid "Back" -msgstr "Indietro" +msgstr "Gale" msgid "Random" -msgstr "Casuale" +msgstr "Atsitiktinė" msgid "Staggered inner seams" -msgstr "Giunzioni interne sfalsate" +msgstr "Vientisos vidinės siūlės" msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" -"Questa opzione fa sì che le giunzioni interne vengano spostate all'indietro " -"in base alla loro profondità, formando un motivo a zig-zag." +"Vientisos vidinės siūlės Dėl šios parinkties vidinės siūlės bus paslinktos " +"atgal pagal jų gylį, suformuojant zigzago raštą." msgid "Seam gap" -msgstr "Gap di cucitura" +msgstr "Siūlės tarpas" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -12795,33 +15633,31 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current extruder diameter. The default value for this parameter is 10%." msgstr "" -"Per ridurre la visibilità della cucitura in un'estrusione ad anello chiuso, " -"l'anello viene interrotto e accorciato di una quantità specificata.\n" -"Questa quantità può essere specificata in millimetri o come percentuale del " -"diametro corrente dell'estrusore. Il valore predefinito per questo parametro " -"è 10%." +"Siekiant sumažinti uždaros kilpos ekstruzijos siūlės matomumą, kilpa " +"pertraukiama ir sutrumpinama tam tikru dydžiu.\n" +"Šį kiekį galima nurodyti milimetrais arba procentais nuo esamo ekstruderio " +"skersmens. Numatytoji šio parametro vertė yra 10 %." msgid "Scarf joint seam (beta)" -msgstr "Cucitura a sciarpa (beta)" +msgstr "Juostos jungiamoji siūlė (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Utilizzare il giunto a sciarpa per ridurre al minimo la visibilità della " -"cucitura e aumentare la resistenza della cucitura." +"Naudokite juostos jungtį, kad siūlės būtų kuo mažiau matomos ir padidėtų " +"siūlės tvirtumas." msgid "Conditional scarf joint" -msgstr "Cucitura a Sciarpa Condizionata" +msgstr "Sąlyginė juostinė jungtis" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Applicare le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture " -"tradizionali non riescono a nascondere efficacemente quelle in " -"corrispondenza degli angoli vivi." +"Skersines siūles naudokite tik ties lygiais perimetrais, kai įprastinės " +"siūlės efektyviai nepaslepia aštrių kampų siūlių." msgid "Conditional angle threshold" -msgstr "Soglia dell'angolo Condizionale" +msgstr "Sąlyginė kampo riba" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12830,14 +15666,13 @@ msgid "" "(indicating the absence of sharp corners), a scarf joint seam will be used. " "The default value is 155°." msgstr "" -"Questa opzione imposta la soglia dell'angolo per l'applicazione di una " -"cucitura condizionale.\n" -"Se l'angolo massimo all'interno dell'anello perimetrale supera questo valore " -"(che indica l'assenza di spigoli vivi), si utilizzerà una cucitura a " -"sciarpa. Il valore predefinito è 155°." +"Šia parinktimi nustatomas ribinis kampas, kuriuo taikoma sąlyginė juostinė " +"siūlė.\n" +"Jei didžiausias kampas perimetro kilpoje viršija šią vertę (tai rodo, kad " +"nėra aštrių kampų), bus naudojama juostinė siūlė. Numatytoji vertė yra 155°." msgid "Conditional overhang threshold" -msgstr "" +msgstr "Sąlyginė iškyšos riba" #, no-c-format, no-boost-format msgid "" @@ -12847,263 +15682,346 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" +"Šia parinktimi nustatoma iškyšos riba, kurią pasiekus taikomos juostinės " +"siūlės. Jei perimetro neatraminė dalis yra mažesnė už šią ribą, bus taikomos " +"jungiamosios siūlės. Pagal numatytuosius nustatymus ši riba yra 40 % " +"išorinės sienos pločio. Dėl eksploatacinių sumetimų įvertinamas iškyšos " +"laipsnis." msgid "Scarf joint speed" -msgstr "Velocità Cucitura a Sciarpa" +msgstr "Juostos jungties greitis" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" -"Questa opzione imposta la velocità di stampa per le cuciture a sciarpa. È " -"consigliabile stampare le cuciture a sciarpa a una velocità bassa (inferiore " -"a 100 mm/s). È anche opportuno attivare l'opzione 'Lisciatura del tasso di " -"estrusione' se la velocità impostata varia in modo significativo rispetto " -"alla velocità delle pareti esterne o interne.Se la velocità specificata qui " -"è superiore alla velocità delle pareti esterne o interne, la stampante si " -"regolerà di default sulla velocità più bassa delle due. Se specificata come " -"percentuale (ad esempio, 80%), la velocità viene calcolata in base alla " -"velocità della parete esterna o interna. Il valore predefinito è impostato " -"su 100%" +"Šia parinktimi nustatomas juostinių jungčių spausdinimo greitis. " +"Rekomenduojama juostines jungtis spausdinti nedideliu greičiu (mažesniu nei " +"100 mm/s). Taip pat patartina įjungti funkciją \"Spausdinimo greičio " +"išlyginimas\", jei nustatytas greitis labai skiriasi nuo išorinių arba " +"vidinių sienų greičio. Jei čia nustatytas greitis yra didesnis už išorinių " +"arba vidinių sienų greitį, spausdintuvas pagal numatytuosius nustatymus " +"pasirinks lėtesnį iš šių dviejų greičių. Kai nurodyta procentais (pvz., 80 " +"%), greitis apskaičiuojamas pagal atitinkamą išorinių arba vidinių sienų " +"greitį. Numatytoji vertė yra 100 %." msgid "Scarf joint flow ratio" -msgstr "Rapporto di Flusso Cucitura a Sciarpa" +msgstr "Juostinės jungties srauto koeficientas" msgid "This factor affects the amount of material for scarf joints." msgstr "" -"Questo fattore influisce sulla quantità di materiale per le Cuciture a " -"Sciarpa" +"Šis veiksnys turi įtakos medžiagos kiekiui, reikalingam juostinėms siūlėms." msgid "Scarf start height" -msgstr "Altezza di partenza della sciarpa" +msgstr "Juostos pradžios aukštis" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Altezza iniziale della sciarpa.\n" -"Questa quantità può essere specificata in millimetri o come percentuale " -"dell'altezza del layer corrente. Il valore predefinito per questo parametro " -"è 0." +"Pradinis juostos aukštis.\n" +"Šį dydį galima nurodyti milimetrais arba kaip dabartinio sluoksnio aukščio " +"procentinę dalį. Numatytoji šio parametro reikšmė yra 0." msgid "Scarf around entire wall" -msgstr "Sciarpa intorno a tutta la parete" +msgstr "Juosta aplink visą sieną" msgid "The scarf extends to the entire length of the wall." -msgstr "La sciarpa si estende per tutta la lunghezza del muro." +msgstr "Juosta tęsiasi per visą sienos ilgį." msgid "Scarf length" -msgstr "Lunghezza sciarpa" +msgstr "Juostos ilgis" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." -msgstr "" -"Lunghezza della sciarpa. Impostando questo parametro su zero, la sciarpa " -"viene effettivamente disabilitata." +msgstr "Juostos ilgis. Nustačius šį parametrą lygų nuliui, juosta išjungiama." msgid "Scarf steps" -msgstr "Incrementi sciarpa" +msgstr "Jostos žingsniai" msgid "Minimum number of segments of each scarf." -msgstr "Numero minimo di segmenti di ogni sciarpa." +msgstr "Mažiausias kiekvienos juostos segmentų skaičius." msgid "Scarf joint for inner walls" -msgstr "Cucitura a sciarpa per pareti interne" +msgstr "Vidinių sienų juostos jungtis" msgid "Use scarf joint for inner walls as well." -msgstr "Utilizzare la cucitura a sciarpa anche per le pareti interne." +msgstr "Vidinėms sienoms taip pat naudoti juostos jungtį." msgid "Role base wipe speed" -msgstr "Wipe Speed" +msgstr "Vaidmens pagrindo nuvalymo greitis" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"La velocità di pulizia è determinata dalla velocità del ruolo di estrusione " -"corrente, ad es. Se un'azione di pulizia viene eseguita immediatamente dopo " -"un'estrusione della parete esterna, la velocità di estrusione della parete " -"esterna verrà utilizzata per l'azione di pulizia." +"Jei nuvalymo veiksmas atliekamas iš karto po išorinės sienelės išspaudimo, " +"nuvalymo veiksmui bus naudojamas išorinės sienelės išspaudimo greitis." msgid "Wipe on loops" -msgstr "Pulisci sui loop" +msgstr "Nuvalyti kilpas" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " "inward movement is executed before the extruder leaves the loop." msgstr "" -"Per ridurre al minimo la visibilità della cucitura in un'estrusione ad " -"anello chiuso, viene eseguito un piccolo movimento verso l'interno prima che " -"l'estrusore lasci l'anello." +"Siekiant sumažinti siūlės matomumą uždaroje ekstruzijos kilpoje, prieš " +"ekstruderiui išeinant iš kilpos atliekamas nedidelis judesys į vidų." msgid "Wipe before external loop" -msgstr "Pulire prima del loop esterno" +msgstr "Nuvalyti prieš išorinę kilpą" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" -"Per ridurre al minimo la visibilità di una potenziale sovraestrusione " -"all'inizio di un perimetro esterno quando si stampa con l'ordine di stampa " -"Esterno/Interno o Interno/Esterno/Interno/Parete interna, la deretrazione " -"viene eseguita leggermente all'interno dall'inizio del perimetro esterno. In " -"questo modo qualsiasi potenziale sovraestrusione viene nascosta dalla " -"superficie esterna. \n" +"Siekiant sumažinti galimo perteklinio išspaudimo matomumą išorinio perimetro " +"pradžioje, kai spausdinama išorinės / vidinės arba vidinės / išorinės / " +"išorinės / vidinės sienos spausdinimo tvarka, ištraukimas atliekamas šiek " +"tiek į vidų nuo išorinio perimetro pradžios. Taip bet koks galimas " +"perteklinis išspaudimas paslepiamas nuo išorinio paviršiaus.\n" "\n" -"Ciò è utile quando si stampa con l'ordine di stampa Esterno/Interno o " -"Interno/Esterno/Interno parete, poiché in queste modalità è più probabile " -"che venga stampato un perimetro esterno immediatamente dopo un movimento di " -"retrazione." +"Tai naudinga, kai spausdinama naudojant išorinės / vidinės arba vidinės / " +"išorinės / išorinės / vidinės sienos spausdinimo tvarką, nes šiuose " +"režimuose didesnė tikimybė, kad išorinis perimetras bus išspausdintas iš " +"karto po ištraukimo pašalinimo judesio." msgid "Wipe speed" -msgstr "Velocità di pulizia" +msgstr "Valymo greitis" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"La velocità di pulizia è determinata dall'impostazione della velocità " -"specificata in questa configurazione. Se il valore è espresso in percentuale " -"(ad es. 80%), verrà calcolato in base all'impostazione della velocità di " -"traslazione di cui sopra. Il valore predefinito per questo parametro è 80%" +"Valymo greitis nustatomas pagal šioje konfigūracijoje nurodytą greičio " +"nustatymą.Jei vertė išreikšta procentais (pvz., 80 %), ji bus apskaičiuota " +"pagal pirmiau nurodytą judėjimo greičio nustatymą. Numatytoji šio parametro " +"vertė yra 80%." msgid "Skirt distance" -msgstr "Distanza Skirt" +msgstr "Apvado atstumas" -msgid "Distance from skirt to brim or object" -msgstr "Questa è la distanza dallo skirt al brim o all'oggetto." +msgid "The distance from the skirt to the brim or the object." +msgstr "Tai atstumas nuo apvado iki krašto arba objekto." + +msgid "Skirt start point" +msgstr "Apvado pradžios taškas" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Kampas nuo objekto centro iki apvado pradžios taško. Nulis yra labiausiai į " +"dešinę nukreipta padėtis, prieš laikrodžio rodyklę - teigiamas kampas." msgid "Skirt height" -msgstr "Altezza skirt" +msgstr "Apvado aukštis" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Numero di layer skirt: solitamente uno" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Kiek sluoksnių apvado. Paprastai tik vienas sluoksnis." + +msgid "Single loop after first layer" +msgstr "Viengubas kontūras po pirmojo sluoksnio" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Apriboja apvado/apsauginio skydo kontūrus iki vienos sienos po pirmojo " +"sluoksnio. Tai kartais yra naudinga, norint sutaupyti giją, tačiau gali " +"sukelti apsauginio skydo/apvado deformaciją/įtrūkimus." msgid "Draft shield" -msgstr "Scudo di protezione" +msgstr "Apsauginis kokonas" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" - -msgid "Limited" -msgstr "Limitato" +"Apsauginis skydas yra naudingas siekiant apsaugoti ABS arba ASA spaudinį nuo " +"išlinkimo ir atsiskyrimo nuo spausdinimo pagrindo dėl skersvėjo. Jo " +"paprastai reikia tik atviruose rėminiuose spausdintuvuose, t. y. be gaubto.\n" +"\n" +"Įjungta = apvadas yra tokio aukščio kaip aukščiausias spausdinamas objektas. " +"Priešingu atveju naudojamas „apvado aukštis“.\n" +"Pastaba: Kai įjungtas apsauginis skydas, apvadas bus spausdinamas apvado " +"atstumu nuo objekto. Todėl, jei aktyvuoti apvadai, jis gali su jais " +"susikirsti. Norėdami to išvengti, padidinkite apvado atstumo reikšmę.\n" msgid "Enabled" -msgstr "Abilitato" +msgstr "Įjungta" + +msgid "Skirt type" +msgstr "Apvado tipas" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Kombinuota - vienas apvadas visiems objektams, Objektui - atskiras objekto " +"apvadas." + +msgid "Per object" +msgstr "Objektui" msgid "Skirt loops" -msgstr "Anelli skirt" +msgstr "Apvado kontūrai" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "" -"Questo è il numero di loop per lo skirt. 0 indica che lo skirt è disattivata." +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Tai yra apvado kontūrų skaičius. 0 reiškia, kad apvadas išjungtas." msgid "Skirt speed" -msgstr "Velocità Skirt" +msgstr "Apvado greitis" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "" -"Velocità del gonna, in mm/s. Zero significa utilizzare la velocità di " -"estrusione dello strato predefinita." +"Apvado greitis, mm/s. Nulis reiškia, kad naudojamas numatytasis sluoksnio " +"išspaudimo greitis." msgid "Skirt minimum extrusion length" -msgstr "" +msgstr "Minimalus apvado išspaudimo ilgis" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" +"Mažiausias gijos išspaudimo ilgis mm, kai spausdinamas apvadas. Nulis " +"reiškia, kad ši funkcija išjungta.\n" +"\n" +"Naudoti nenulinę vertę naudinga, jei spausdintuvas nustatytas spausdinti be " +"pirminės linijos.\n" +"Į galutinį kontūrų skaičių neatsižvelgiama, kai organizuojamas arba " +"patvirtinamas objektų atstumas. Tokiu atveju padidinkite kontūrų skaičių." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" -"La velocità di stampa nel G-code esportato verrà rallentata quando il tempo " -"stimato del layer è inferiore a questo valore per ottenere un migliore " -"raffreddamento per questi layers." +"Spausdinimo greitis eksportuotame G-kode bus sulėtintas, kai numatomas " +"sluoksnio laikas bus trumpesnis už šią vertę, siekiant užtikrinti geresnį " +"šių sluoksnių aušinimą." msgid "Minimum sparse infill threshold" -msgstr "Soglia minima riempimento" +msgstr "Minimali reto užpildymo riba" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"L'area riempimento che è inferiore al valore di soglia viene sostituita da " -"un riempimento solido interno." +"Reto užpildymo sritys, kurios yra mažesnės už šią ribinę vertę, pakeičiamos " +"vidiniu vientisu užpildymu." + +msgid "Solid infill" +msgstr "Vientisas užpildas" + +msgid "Filament to print solid infill." +msgstr "Filamentas vientisam užpildui spausdinti." msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Larghezza della linea del riempimento solido interno. Se espresso come %, " -"verrà calcolato sul diametro del nozzle." +"Vidinio vientiso užpildo linijos plotis. Jei išreiškiamas %, jis " +"apskaičiuojamas pagal purkštuko skersmenį." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" -"Indica la velocità del riempimento solido interno, esclusa la superficie " -"superiore o inferiore." +"Tai vidinio vientiso užpildo greitis, neįskaitant viršutinio ar apatinio " +"paviršiaus." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"Consente la stampa a spirale, che attenua i movimenti Z del contorno esterno " -"e trasforma un modello solido in una stampa a parete singola con layers " -"inferiori solidi. Il modello finale generato non presenta alcuna giunzione." +"Tai leidžia atlikti spiralinį išlyginimą, kuris išlygina išorinio kontūro Z " +"judesius ir paverčia vientisą modelį į vienos sienelės atspaudą su " +"vientisais apatiniais sluoksniais. Galutiniame sudarytame modelyje nėra " +"siūlės." msgid "Smooth Spiral" -msgstr "Spirale liscia" +msgstr "Lygi spiralė" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral leviga anche i movimenti X e Y, senza alcuna cucitura " -"visibile, anche nelle direzioni XY su pareti che non sono verticali" +"Sklandi spiralė išlygina X ir Y judesius, todėl XY kryptimis ant ne " +"vertikalių sienų visiškai nesimato siūlių." msgid "Max XY Smoothing" -msgstr "Levigatura Max XY" +msgstr "Didžiausias XY išlyginimas" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" -"Distanza massima per spostare i punti in XY per cercare di ottenere una " -"spirale uniformeSe espressa come %, verrà calcolata sul diametro del nozzle" +"Didžiausias atstumas, kuriuo galima perkelti taškus XY kryptimi, kad būtų " +"pasiekta tolygi spiralė. Jei išreiškiamas %, jis bus apskaičiuojamas pagal " +"purkštuko skersmenį." + +msgid "Spiral starting flow ratio" +msgstr "Pradinis srauto santykis spiralėje" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Nustato pradinį srauto santykį pereinant iš paskutinio apatinio sluoksnio į " +"spiralę. Įprastai perėjimo į spiralę metu srauto santykis pirmojo ciklo metu " +"keičiamas nuo 0 % iki 100 %, todėl kai kuriais atvejais spiralės pradžioje " +"gali būti nepakankamas išspaudimas." + +msgid "Spiral finishing flow ratio" +msgstr "Galinis srauto santykis spiralėje" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Nustato baigiamojo srauto santykį, kai baigiama spiralė. Paprastai spiralės " +"perėjimo metu srauto santykis keičiamas nuo 100 % iki 0 % paskutinio ciklo " +"metu, todėl kai kuriais atvejais spiralės pabaigoje gali būti nepakankamas " +"išspaudimas." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13115,38 +16033,73 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"Se si seleziona la modalità \"Smooth\" o \"Tradizionale\", per ogni stampa " -"viene generato un video in timelapse. Dopo la stampa di ogni layer, viene " -"scattata una foto.Tutte queste foto verranno unite per creare un video " -"timelapse al termine della stampa. Se si seleziona \"Smooth\", la testa di " -"stampa si sposta sullo scivolo di spurgo posteriore dopo la stampa di ogni " -"layer e poi scatta una foto. Poiché il filamento può fuoriuscire dal nozzle " -"durante il processo di acquisizione della foto, la modalità \"Smooth\" ha " -"bisogno che venga utilizzata la prime tower per pulire il nozzle." +"Jei pasirinktas lygus arba tradicinis režimas, kiekvienam spaudiniui bus " +"sukurtas pakadrinis vaizdo įrašas. Atspausdinus kiekvieną sluoksnį, kameros " +"fotoaparatu padaroma momentinė nuotrauka. Baigus spausdinti, visos šios " +"momentinės nuotraukos sudedamos į laike rodomą vaizdo įrašą. Jei pasirinktas " +"sklandus režimas, po kiekvieno sluoksnio atspausdinimo įrankio galvutė " +"persikels į perteklinį lataką ir tada padarys momentinę nuotrauką. Kadangi " +"darant momentinę nuotrauką iš purkštuko gali ištekėti lydalo gija, norint " +"nuvalyti purkštuką, naudojant sklandųjį režimą reikalingas pirminis " +"bokštelis." msgid "Traditional" -msgstr "Tradizionale" +msgstr "Tradicinis" msgid "Temperature variation" -msgstr "Variazione di temperatura" +msgstr "Temperatūros kitimas" + +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Temperatūros skirtumas, taikomas, kai ekstruderis nėra aktyvus. Ši vertė " +"nenaudojama, kai „idle_temperature“ gijų nustatymuose nustatyta ne nulinė " +"vertė." + +msgid "Preheat time" +msgstr "Įkaitinimo laikas" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Kad sutrumpėtų laukimo laikas pakeitus įrankį, Orca gali iš anksto įkaitinti " +"kitą įrankį, kol dabartinis įrankis dar naudojamas. Šis nustatymas nurodo " +"kito įrankio įkaitinimo laiką sekundėmis. Orca įterps komandą M104, kad " +"įrankis būtų įkaitintas iš anksto." + +msgid "Preheat steps" +msgstr "Įkaitinimo etapai" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Įterpkite kelias įkaitinimo komandas (pvz., M104.1). Naudinga tik „Prusa " +"XL“. Kitiems spausdintuvams nustatykite 1." msgid "Start G-code" -msgstr "G-code iniziale" +msgstr "Pradžios G-kodas" -msgid "Start G-code when start the whole printing" -msgstr "G-code aggiunto all'avvio di una stampa" +msgid "Start G-code when starting the entire print." +msgstr "G kodo paleidimas, kai pradedamas visas spausdinimas." -msgid "Start G-code when start the printing of this filament" -msgstr "G-code aggiunto quando la stampante utilizza questo filamento" +msgid "Start G-code when starting the printing of this filament." +msgstr "Paleisti G-kodą, kai pradedama spausdinti šia gija." msgid "Single Extruder Multi Material" -msgstr "Estrusore singolo Multi Material" +msgstr "Vieno ekstruderio daugialypė medžiaga" -msgid "Use single nozzle to print multi filament" -msgstr "Usa un ugello singolo per stampare più filamenti" +msgid "Use single nozzle to print multi filament." +msgstr "Naudoti vieną antgalį spausdinti keliomis gijomis." msgid "Manual Filament Change" -msgstr "Cambio manuale del filamento" +msgstr "Rankinis gijų keitimas" msgid "" "Enable this option to omit the custom Change filament G-code only at the " @@ -13155,80 +16108,79 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"Abilita questa opzione per omettere il codice G Cambia filamento " -"personalizzato solo all'inizio della stampa. Il comando di cambio utensile " -"(ad es. T0) verrà saltato durante l'intera stampa. Ciò è utile per la stampa " -"manuale multi-materiale, in cui utilizziamo M600/PAUSE per attivare l'azione " -"di cambio filamento manuale." +"Įjunkite šią parinktį, kad pasirinktinis Keisti gijos G-kodas būtų " +"praleistas tik spausdinimo pradžioje. Įrankio keitimo komanda (pvz., T0) bus " +"praleista viso spausdinimo metu. Tai naudinga spausdinant keliomis " +"medžiagomis rankiniu būdu, kai rankinio gijos keitimo veiksmui įjungti " +"naudojame M600/PAUSE." msgid "Purge in prime tower" -msgstr "Spurga nella Prime tower" +msgstr "Valymas pagrindiniame bokšte" -msgid "Purge remaining filament into prime tower" -msgstr "Spurgare il filamento rimanente nella torre di prim'ordine" +msgid "Purge remaining filament into prime tower." +msgstr "Išstumti likusias gijas į pirminio valymo bokštą." msgid "Enable filament ramming" -msgstr "Abilita lo speronamento del filamento" +msgstr "Įjungti gijos ramingą" msgid "No sparse layers (beta)" -msgstr "Nessun strato sparso (beta)" +msgstr "Nėra retų sluoksnių (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Se attiva, la torre di pulitura non verrà stampata sui layer senza cambio " -"strumento. Sui layer con un cambio strumento, l'estrusore si sposterà verso " -"il basso per stampare la torre di pulitura. L'utente dovrà accertarsi che " -"non avvengano collisioni con la stampa." +"Jei įjungta, valymo bokštas nebus spausdinamas ant sluoksnių, nepakeitus " +"įrankio. Sluoksniuose, kuriuose keičiamas įrankis, ekstruderis judės žemyn, " +"kad atspausdintų valymo bokštą. Vartotojas yra atsakingas už tai, kad nebūtų " +"susidūrimo su spaudiniu." msgid "Prime all printing extruders" -msgstr "Prepara tutti gli estrusori di stampa" +msgstr "Pripildyti visus spausdinimo ekstruderius" msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Se attivata, tutti gli estrusori di stampa verranno preparati nel bordo " -"frontale del piano di stampa all'inizio della stampa." +"Jei įjungta, visi spausdinimo ekstruderiai bus užpildyti priekiniame " +"spausdinimo pagrindo krašte spausdinimo pradžioje." msgid "Slice gap closing radius" -msgstr "Raggio chiusura del gap" +msgstr "Sluoksniavimo tarpo uždarymo spindulys" msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Le fessure più piccole di 2X del gap vengono riempite durante lo slicing " -"della mesh del triangolo.\n" -"L'operazione di chiusura della fessura può ridurre la risoluzione di stampa " -"finale.\n" -"Si consiglia di mantenere un valore ragionevolmente basso." +"Plyšiai, mažesni nei 2x tarpo uždarymo spindulys, užpildomi trikampio " +"figūros sluoksniavimo metu. Tarpo uždarymo operacija gali sumažinti galutinę " +"spausdinimo skiriamąją gebą, todėl patartina išlaikyti pakankamai žemą " +"reikšmę." msgid "Slicing Mode" -msgstr "Modalità slicing" +msgstr "Sluoksniavimo režimas" msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" -"Usa \"Pari-dispari\" per modelli di aeroplano 3DLabPrint. Utilizza \"Chiudi " -"fori\" per chiudere tutti i fori del modello." +"3DLabPrint lėktuvų modeliams naudokite „Lyginis-Nelyginis“. Naudokite " +"„Uždaryti skyles“, kad uždarytumėte visas modelio skyles." msgid "Regular" -msgstr "Regolare" +msgstr "Įprastas" msgid "Even-odd" -msgstr "Pari-dispari" +msgstr "Lyginis-nelyginis" msgid "Close holes" -msgstr "Chiudi fori" +msgstr "Uždaryti skyles" msgid "Z offset" -msgstr "Offset Z" +msgstr "Z poslinkis" msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -13236,207 +16188,216 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"Questo valore sarà aggiunto (o sottratto) da tutte le coordinate Z nel G-" -"code di output. Viene utilizzato per compensare una posizione di finecorsa Z " -"errata: per esempio, se la posizione minima del finecorsa rimane in realtà " -"0.3mm lontano dal piano, imposta questo valore a -0.3 (o sistema il " -"finecorsa)." +"Ši vertė bus pridėta (arba atimta) prie visų išvesties G kodo Z koordinačių. " +"Ji naudojama blogai Z galinio ribotuvo padėčiai kompensuoti: pavyzdžiui, jei " +"jūsų nulinis ribotuvas iš tikrųjų palieka purkštuką 0,3 mm atstumu nuo " +"spausdinimo pagrindo, nustatykite šią reikšmę -0,3 (arba pataisykite galinį " +"ribotuvą)." msgid "Enable support" -msgstr "Abilita supporti" +msgstr "Įgalinti atramas" msgid "Enable support generation." -msgstr "Abilita la generazione dei supporti." +msgstr "Įgalinti atramų generavimą." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normale(auto) e albero(auto) sono usati per generare automaticamente i " -"supporti. Se si seleziona normale(manuale) o albero(manuale), vengono " -"generati solo gli esecutori del supporto." +"Normalus (automatinis) ir Medis (automatinis) naudojamas automatiškai " +"generuoti atramas. Pasirinkus Normalus (rankinis) arba Medis (rankinis), " +"generuojamos tik atramos." -msgid "normal(auto)" -msgstr "normal(auto)" +msgid "Normal (auto)" +msgstr "Įprastas (auto)" -msgid "tree(auto)" -msgstr "albero(auto)" +msgid "Tree (auto)" +msgstr "Medis (auto)" -msgid "normal(manual)" -msgstr "normale(manuale)" +msgid "Normal (manual)" +msgstr "Įprastas (rankinis)" -msgid "tree(manual)" -msgstr "albero(manuale)" +msgid "Tree (manual)" +msgstr "Medis (rankinis)" -msgid "Support/object xy distance" -msgstr "Distanza xy supporto/oggetto" +msgid "Support/object XY distance" +msgstr "Atramos/objekto XY atstumas" -msgid "XY separation between an object and its support" -msgstr "Separazione XY tra un oggetto e il suo supporto" +msgid "XY separation between an object and its support." +msgstr "Šiuo parametru nustatomas objekto ir atramos XY atstumas." + +msgid "Support/object first layer gap" +msgstr "Atramos ir objekto pirmojo sluoksnio tarpas" + +msgid "XY separation between an object and its support at the first layer." +msgstr "XY atstumas tarp objekto ir jo atramos pirmajame sluoksnyje." msgid "Pattern angle" -msgstr "Angolo trama" +msgstr "Rašto kampas" msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "Usa questo per ruotare sul piano orizzontale la trama del supporto." +msgstr "" +"Šį nustatymą naudokite norėdami pasukti atraminį modelį horizontalioje " +"plokštumoje." msgid "On build plate only" -msgstr "Solo dal piatto" +msgstr "Tik ant pagrindo plokštės" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "" -"Questa impostazione genera solo i supporti che poggiano sul piatto di stampa." +"Šis nustatymas generuoja tik tas atramas, kurios prasideda ant spausdinimo " +"plokštės." msgid "Support critical regions only" -msgstr "Supporta solo aree critiche" +msgstr "Paremti tik kritines sritis" msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Creare il supporto solo per le regioni critiche, tra cui una estremità " -"tagliente, sbalzo, ecc." +"Atramas kurkite tik kritinėse srityse, įskaitant aštrų galą, konsolę ir pan." -msgid "Remove small overhangs" -msgstr "Rimuovere piccole sporgenze" - -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs" +msgstr "" + +msgid "Ignore small overhangs that possibly don't require support." msgstr "" -"Rimuovere le piccole sporgenze che eventualmente non necessitano di supporti." msgid "Top Z distance" -msgstr "Distanza Z superiore" +msgstr "Viršutinis Z atstumas" -msgid "The z gap between the top support interface and object" -msgstr "" -"Determina lo spazio Z gap tra le interfacce supporto superiori e gli oggetti." +msgid "The Z gap between the top support interface and object." +msgstr "Taip nustatomas Z tarpas tarp viršutinių atramų sąsajų ir objektų." msgid "Bottom Z distance" -msgstr "Distanza Z inferiore" +msgstr "Apatinis Z atstumas" -msgid "The z gap between the bottom support interface and object" -msgstr "Lo spazio z gap tra l'interfaccia supporto inferiore e l'oggetto" +msgid "The Z gap between the bottom support interface and object." +msgstr "Z tarpas tarp apatinės atramos sąsajos ir objekto." msgid "Support/raft base" -msgstr "Base supporto/raft" +msgstr "Atraminis ir (arba) platformos pagrindas" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Filamento per stampare basi di supporto e raft. \"Predefinito\" indica che " -"non viene utilizzato alcun filamento specifico per il supporto e viene " -"utilizzato il filamento corrente" +"Gija, skirta spausdinti atraminį pagrindą ir platformą. \"Numatytoji\" " +"reiškia, kad nėra konkrečios gijos atramai ir naudojama dabartinė gija." msgid "Avoid interface filament for base" -msgstr "Evitare di usare filamento di interfaccia per la base" +msgstr "Venkite pagrindo sąsajos gijų" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Se possibile, evitare di utilizzare il filamento dell'interfaccia di " -"supporto per stampare la base dello stesso. " +"Jei įmanoma, vengti naudoti atraminės sąsajos giją atraminiam pagrindui " +"spausdinti." msgid "" "Line width of support. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Larghezza della linea di supporto. Se espresso come %, verrà calcolato sul " -"diametro del nozzle." +"Atramos linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas pagal " +"purkštuko skersmenį." msgid "Interface use loop pattern" -msgstr "Loop pattern interface" +msgstr "Sąsaja naudoja kontūro raštą" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Copre con anelli il layer superiore del supporto a contatto. Disattivato per " -"impostazione predefinita." +"Viršutinį kontaktinį atramų sluoksnį uždenkite kilpomis. Išjungta pagal " +"numatytuosius nustatymus." msgid "Support/raft interface" -msgstr "Interfaccia supporto/raft" +msgstr "Atramų ir (arba) platformos sąsaja" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"Filamento per la stampa delle interfacce di supporto. \"Predefinito\" " -"significa che non esiste un filamento specifico per l'interfaccia di " -"supporto e che verrà utilizzato il filamento corrente." +"Gija skirta spausdinti atramos sąsają. \"Numatytoji\" reiškia, kad atramos " +"sąsajai nėra konkrečios gijos ir naudojama dabartinė gija." msgid "Top interface layers" -msgstr "Layer superiori di interfaccia " +msgstr "Viršutiniai sąsajos sluoksniai" -msgid "Number of top interface layers" -msgstr "Indica il numero di layer di interfaccia superiore." +msgid "Number of top interface layers." +msgstr "Viršutinių sąsajos sluoksnių skaičius." msgid "Bottom interface layers" -msgstr "Layer inferiori di interfaccia " +msgstr "Apatiniai sąsajos sluoksniai" -msgid "Number of bottom interface layers" -msgstr "Numero di livelli di interfaccia inferiori" +msgid "Number of bottom interface layers." +msgstr "Apatinių sąsajos sluoksnių skaičius." msgid "Same as top" -msgstr "Come quello superiore" +msgstr "Tas pats kaip ir viršuje" msgid "Top interface spacing" -msgstr "Spaziatura interfaccia superiore" +msgstr "Viršutinės sąsajos tarpas" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Spaziatura linee interfaccia. 0 significa interfaccia solida" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" +"Sąsajos linijų tarpas. Nulis reiškia vientisą sąsają. \n" +"Naudokite vientisą sąsają, kai įjungta atramų lyginimo funkcija." msgid "Bottom interface spacing" -msgstr "Spaziatura interfaccia inferiore" +msgstr "Apatinės sąsajos tarpas" -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "Spaziatura linee interfaccia di fondo. 0 significa interfaccia solida" +msgid "Spacing of bottom interface lines. Zero means solid interface." +msgstr "Atstumas tarp apatinių sąsajos linijų. 0 reiškia vientisą sąsają." -msgid "Speed of support interface" -msgstr "Indica la velocità per le interfacce di supporto." +msgid "Speed of support interface." +msgstr "Atramų sąsajų greitis." msgid "Base pattern" -msgstr "Trama base" +msgstr "Pagrindinis raštas" -msgid "Line pattern of support" -msgstr "Questo è la trama lineare del supporto." +msgid "Line pattern of support." +msgstr "Linijinis atramų raštas." msgid "Rectilinear grid" -msgstr "Griglia rettilinea" +msgstr "Tiesus tinklelis" msgid "Hollow" -msgstr "Svuota" +msgstr "Tuščiaviduris" msgid "Interface pattern" -msgstr "Trama interfaccia" +msgstr "Sąsajos raštas" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" -"Questo è la Trama lineare per le interfacce di supporto. Il modello " -"predefinito per le interfacce di supporto non solubili è rettilineo mentre " -"il modello predefinito per le interfacce di supporto solubili è concentrico." +"Linijinis atraminės sąsajos raštas. Numatytasis netirpios atraminės sąsajos " +"raštas yra tiesiaeigis, o tirpios atraminės sąsajos numatytasis raštas yra " +"koncentrinis." msgid "Rectilinear Interlaced" -msgstr "Rettilineo Interlacciato" +msgstr "Tiesiaeigis, persipynęs" msgid "Base pattern spacing" -msgstr "Spazio trama base" +msgstr "Pagrindinio rašto tarpai" -msgid "Spacing between support lines" -msgstr "Questo determina la spaziatura tra le linee di supporto." +msgid "Spacing between support lines." +msgstr "Atstumai tarp atraminių linijų." msgid "Normal Support expansion" -msgstr "Espansione normale dei supporti" +msgstr "Įprastų atramų išplėtimas" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" -"Espandere (+) o restringere (-) la portata orizzontale del supporto normale" +"Padidinkite (+) arba sumažinkite (-) įprastinės atramos horizontalųjį " +"atstumą." -msgid "Speed of support" -msgstr "Indica la velocità del supporto." +msgid "Speed of support." +msgstr "Atramų greitis." msgid "" "Style and shape of the support. For normal support, projecting the supports " @@ -13447,68 +16408,79 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" -"Stile e forma del supporto. Per il supporto normale, proiettare i supporti " -"in una griglia regolare creerà supporti più stabili (impostazione " -"predefinita), mentre le torri di supporto aderenti risparmieranno materiale " -"e ridurranno le cicatrici degli oggetti.\n" -"Per il supporto dell'albero, lo stile sottile e organico fonderà i rami in " -"modo più aggressivo e risparmierà molto materiale (organico predefinito), " -"mentre lo stile ibrido creerà una struttura simile al supporto normale sotto " -"grandi sporgenze piatte." +"Atramos stilius ir forma. Įprastoms atramoms projektuojant atramas į " +"taisyklingą tinklelį, bus sukurtos stabilesnės atramos (numatytasis " +"nustatymas), o prigludę atramų bokšteliai leis sutaupyti medžiagos ir " +"sumažinti objekto nubrozdinimus.\n" +"Medžių atramoms siauras ir organinis stilius agresyviau sujungs šakas ir " +"sutaupys daug medžiagos (numatytasis organinis), o hibridinis stilius sukurs " +"panašią struktūrą kaip įprastos atramos po didelėmis plokščiomis iškyšomis." + +msgid "Default (Grid/Organic)" +msgstr "Numatytoji reikšmė (Tinklelis/organinis)" msgid "Snug" -msgstr "Aderenti" - -msgid "Tree Slim" -msgstr "Albero Slim" - -msgid "Tree Strong" -msgstr "Albero Forte" - -msgid "Tree Hybrid" -msgstr "Albero ibrido" +msgstr "Aptemti" msgid "Organic" -msgstr "Organico" +msgstr "Organiškas" + +msgid "Tree Slim" +msgstr "Medis plonas" + +msgid "Tree Strong" +msgstr "Tvirtas medis" + +msgid "Tree Hybrid" +msgstr "Hibridinis medis" msgid "Independent support layer height" -msgstr "Altezza layer di supporto indipendente" +msgstr "Nepriklausomas atraminio sluoksnio aukštis" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Il layer di supporto utilizza l'altezza layer indipendentemente dal layer " -"dell'oggetto. Questo serve a supportare la personalizzazione di z-gap e " -"ridurre il tempo di stampa. Questa opzione non puó essere utilizzata quando " -"la Prime Tower è abilitata." +"Atraminis sluoksnis naudoja sluoksnio aukštį, nepriklausomą nuo objekto " +"sluoksnio. Taip palaikomas z tarpo pritaikymas ir taupomas spausdinimo " +"laikas.Ši parinktis negalioja, kai įjungtas pagrindinis bokštas." msgid "Threshold angle" -msgstr "Angolo di soglia" +msgstr "Ribinis kampas" msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." msgstr "" -"Il supporto sarà generato per le sporgenze il cui angolo di inclinazione è " -"inferiore alla soglia." +"Iškyšoms, kurių nuolydžio kampas yra mažesnis už ribą, bus sukurta atrama." -msgid "Tree support branch angle" -msgstr "Angolo ramo supporti ad albero" +msgid "Threshold overlap" +msgstr "Slenksčio persidengimas" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Jei slenkstinis kampas lygus nuliui, atrama bus sukurta iškyšoms, kurių " +"persidengimas yra mažesnis už slenkstį. Kuo mažesnė ši vertė, tuo statesnė " +"iškyša, kurią galima spausdinti be atramos." + +msgid "Tree support branch angle" +msgstr "Atraminio medžio šakos kampas" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"Questa determina l'angolo massimo di sporgenza che i rami del supporto ad " -"albero possono raggiungere. Se l'angolo viene aumentato, i rami possono " -"essere stampati più orizzontalmente, permettendo loro di arrivare più " -"lontano." +"Šis nustatymas nustato didžiausią iškyšos kampą, kurį gali sudaryti medžio " +"atramos šakos. Padidinus kampą, šakos gali būti atspausdintos horizontaliau, " +"todėl jos gali siekti toliau." msgid "Preferred Branch Angle" -msgstr "Angolo di diramazione preferito" +msgstr "Pageidaujamas šakos kampas" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "" @@ -13516,21 +16488,19 @@ msgid "" "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle for branches to merge faster." msgstr "" -"L'angolo di inclinazione preferito delle ramificazioni, quando non devono " -"evitare il modello. Utilizzare un angolo più basso per renderli più " -"verticali e più stabili. Utilizzare un angolo più alto per far sì che le " -"ramificazioni si uniscano più velocemente." +"Pageidaujamas šakų kampas, kai joms nereikia vengti modelio. Naudokite " +"mažesnį kampą, kad jos būtų vertikalesnės ir stabilesnės. Naudokite didesnį " +"kampą, kad šakos greičiau susijungtų." msgid "Tree support branch distance" -msgstr "Distanza ramo supporti ad albero" +msgstr "Atstumas tarp atraminio medžio šakų" msgid "" "This setting determines the distance between neighboring tree support nodes." -msgstr "" -"Questa determina la distanza tra i nodi di supporto dell'albero vicini." +msgstr "Šis nustatymas nustato atstumą tarp kaimyninių medžio atraminių mazgų." msgid "Branch Density" -msgstr "Densità Ramificazioni" +msgstr "Šakų tankis" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "" @@ -13540,55 +16510,43 @@ msgid "" "interfaces instead of a high branch density value if dense interfaces are " "needed." msgstr "" -"Regola la densità della struttura di supporto utilizzata per generare le " -"punte delle ramificazioni. Un valore più alto produce sporgenze migliori, ma " -"i supporti sono più difficili da rimuovere; si consiglia quindi di abilitare " -"l'interfaccia di supporto superiore invece di impostare un valore elevato di " -"densità delle ramificazioni, se sono necessarie interfacce dense." - -msgid "Adaptive layer height" -msgstr "Altezza del livello adattivo" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"L'attivazione di questa opzione significa che l'altezza del layer di " -"supporto dell'albero, ad eccezione del primo, verrà calcolata " -"automaticamente " +"Reguliuoja atraminės struktūros, naudojamos šakų viršūnėms formuoti, tankį. " +"Pasirinkus didesnę reikšmę, gaunamos geresnės iškyšos, tačiau atramas " +"sunkiau pašalinti, todėl, jei reikia tankios atramos, rekomenduojama įjungti " +"viršutinių atramų sąsajas, o ne didelę šakų tankio reikšmę." msgid "Auto brim width" -msgstr "Larghezza automatica del bordo" +msgstr "Automatinis kraštų plotis" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" -"Abilitando questa opzione, la larghezza del brim per il supporto dell'albero " -"verrà calcolata automaticamente" +"Įjungus šią parinktį, medžio atramos krašto plotis apskaičiuojamas " +"automatiškai." msgid "Tree support brim width" -msgstr "Larghezza brim supporto ad albero" +msgstr "Atraminio medžio krašto plotis" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Distanza dal ramo dell'albero alla linea di bordo più esterna" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Atstumas nuo medžio šakos iki išorinės krašto linijos." msgid "Tip Diameter" -msgstr "Diametro della punta" +msgstr "Galo skersmuo" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." -msgstr "Diametro della punta delle ramificazioni per i supporti organici." +msgstr "Organinių atramų šakos galo skersmuo." msgid "Tree support branch diameter" -msgstr "Diametro ramo supporti ad albero" +msgstr "Atraminio medžio šakų skersmuo" msgid "This setting determines the initial diameter of support nodes." -msgstr "Questa determina il diametro iniziale dei nodi di supporto." +msgstr "Šiuo nustatymu nustatomas pradinis atraminių mazgų skersmuo." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" -msgstr "Angolo del diametro della diramazione" +msgstr "Šakų skersmens kampas" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "" @@ -13597,237 +16555,323 @@ msgid "" "over their length. A bit of an angle can increase stability of the organic " "support." msgstr "" -"L'angolo del diametro delle ramificazioni che diventano gradualmente più " -"spesse verso il basso. Un angolo pari a 0 fa sì che le ramificazioni abbiano " -"uno spessore uniforme per tutta la loro lunghezza. Un angolo un po' più " -"ampio può aumentare la stabilità del supporto organico." - -msgid "Branch Diameter with double walls" -msgstr "Diametro diramazioni con pareti doppie" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Le ramificazioni con un'area superiore all'area di un cerchio di questo " -"diametro verranno stampate con pareti doppie per garantire la stabilità. " -"Imposta questo valore a zero per non avere pareti doppie." +"Šakų skersmens kampas, joms palaipsniui storėjant link apačios. Jei kampas " +"lygus 0, šakos bus vienodo storio per visą ilgį. Šiek tiek didesnis kampas " +"gali padidinti organinės atramos stabilumą." msgid "Support wall loops" -msgstr "Loop parete supporto" +msgstr "Atramų sienų kontūrai" -msgid "This setting specify the count of walls around support" -msgstr "Questa impostazione specifica il numero di pareti intorno al supporto" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Šis nustatymas nurodo atramų sienų storį intervale [0,2]. 0 reiškia " +"automatinis." msgid "Tree support with infill" -msgstr "Riempimento supporti ad albero" +msgstr "Medžių atramos su užpildymu" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" -"Questa impostazione specifica se aggiungere il riempimento all'interno di " -"grandi cavità del supporto dell'albero" +"Šis nustatymas nurodo, ar į dideles medžio atramos ertmes dėti užpildą." + +msgid "Ironing Support Interface" +msgstr "Atramų lyginimo sąsaja" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"Lyginimas – tai mažo srauto naudojimas, kad būtų galima vėl spausdinti ant " +"tos pačios aukščio atramos sąsajos, kad ji taptų lygesnė. Šis nustatymas " +"kontroliuoja, ar atramos sąsaja bus lyginama. Kai šis nustatymas įjungtas, " +"atramos sąsaja taip pat bus išspaudžiama kaip vientisa." + +msgid "Support Ironing Pattern" +msgstr "Atramų lyginimo raštas" + +msgid "Support Ironing flow" +msgstr "Atramų lyginimo srautas" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"Išspaudžiamo medžiagos kiekis lyginimo metu. Santykinis normalaus atraminio " +"sąsajos sluoksnio aukščio srautas. Per didelė vertė sukelia per didelį " +"išspaudimą ant paviršiaus." + +msgid "Support Ironing line spacing" +msgstr "Atramų lyginimo linijų tarpai" msgid "Activate temperature control" -msgstr "Attiva il controllo della temperatura" +msgstr "Suaktyvinti temperatūros reguliavimą" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Abilitare questa opzione per il controllo della temperatura della camera. Un " -"comando M191 verrà aggiunto prima di \"machine_start_gcode\"\n" -"Comandi G-code: M141/M191 S(0-255)" +"Įjunkite šią parinktį, kad būtų galima automatizuotai valdyti kameros " +"temperatūrą. Ši parinktis įjungia M191 komandos transliavimą prieš " +"„machine_start_gcode“\n" +" kuri nustato kameros temperatūrą ir laukia, kol ji bus pasiekta. Be to, " +"spausdinimo pabaigoje ji išspinduliuoja komandą M141, kad būtų išjungtas " +"kameros šildytuvas, jei toks yra.\n" +"\n" +"Ši parinktis priklauso nuo to, ar programinė įranga palaiko komandas M191 ir " +"M141 per makrokomandas, ar gimtąja kalba, ir paprastai naudojama, kai " +"įrengtas aktyvus kameros šildytuvas." msgid "Chamber temperature" -msgstr "Temperatura della camera di stampa" +msgstr "Kameros temperatūra" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Una temperatura della camera più elevata può aiutare a sopprimere o ridurre " -"la deformazione e potenzialmente portare a una maggiore forza di adesione " -"tra gli strati per materiali ad alta temperatura come ABS, ASA, PC, PA e " -"così via. Allo stesso tempo, la filtrazione dell'aria di ABS e ASA " -"peggiorerà. Mentre per PLA, PETG, TPU, PVA e altri materiali a bassa " -"temperatura, la temperatura effettiva della camera non dovrebbe essere " -"elevata per evitare intasamenti, quindi 0 che sta per spegnimento è " -"altamente raccomandato" +"Aukštos temperatūros medžiagoms, tokioms kaip ABS, ASA, PC ir PA, aukštesnė " +"temperatūra kameroje gali padėti sumažinti arba sumažinti deformacijas ir " +"padidinti tarpsluoksninio sukibimo stiprumą. Tačiau tuo pat metu aukštesnė " +"kameros temperatūra sumažina ABS ir ASA oro filtravimo efektyvumą.\n" +"\n" +"PLA, PETG, TPU, PVA ir kitoms žemos temperatūros medžiagoms ši parinktis " +"turėtų būti išjungta (nustatyta į 0), nes kameros temperatūra turėtų būti " +"žema, kad būtų išvengta ekstruderio užsikimšimo dėl medžiagos suminkštėjimo " +"šilumos slenkstyje.\n" +"\n" +"Jei įjungtas, šis parametras taip pat nustato gkodo kintamąjį " +"chamber_temperature, kuris gali būti naudojamas norimai kameros temperatūrai " +"perduoti spausdinimo pradžios makrokomandai arba tokiai šiluminio įšilimo " +"makrokomandai: (kiti kintamieji) CHAMBER_TEMP=[chamber_temperature]. Tai " +"gali būti naudinga, jei jūsų spausdintuvas nepalaiko M141/M191 komandų arba " +"jei norite, kad spausdinimo pradžios makrokomandoje būtų tvarkomas šilumos " +"įšildymas, jei nėra aktyvaus kameros šildytuvo." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Temperatura del nozzle dopo il primo layer" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Po pradinio sluoksnio esančių sluoksnių purkštuko temperatūra." msgid "Detect thin wall" -msgstr "Rileva pareti sottili" +msgstr "Aptikti plonas sieneles" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" -"Questo rileva pareti sottili che non possono contenere due righe e utilizza " -"una sola riga per la stampa. Potrebbe non essere stampato altrettanto bene " -"perché non è un circuito chiuso." +"Aptikti ploną sienelę, kurioje negali būti dviejų eilučių pločio. " +"Spausdinimui naudoti vieną liniją. Gali būti, kad nebus išspausdinta labai " +"gerai, nes tai nėra uždaras kontūras." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -"Questo G-code viene inserito al cambio filamento, compresi i comandi T per " -"attivare il cambio utensile." +"Šis G kodas įterpiamas keičiant giją, įskaitant T komandas, skirtas įrankio " +"keitimui suaktyvinti." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "" -"Questo gcode viene inserito quando viene modificato il ruolo di estrusione" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Šis G kodas įterpiamas, kai keičiamas išspaudimo vaidmuo." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Larghezza della linea per le superfici superiori. Se espresso come %, verrà " -"calcolato sul diametro del nozzle." +"Viršutinių paviršių linijos plotis. Jei išreiškiamas %, jis bus " +"apskaičiuojamas pagal purkštuko skersmenį." -msgid "Speed of top surface infill which is solid" -msgstr "Indica la velocità per il riempimento superficie superiore solida." +msgid "Speed of top surface infill which is solid." +msgstr "Viršutinio vientiso paviršiaus užpildo greitis." msgid "Top shell layers" -msgstr "Layer guscio superiore" +msgstr "Viršutiniai apvalkalo sluoksniai" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" -"Indica il numero di layer solidi del guscio superiore, compreso il layer " -"superficiale superiore. Se lo spessore calcolato con questo valore è più " -"sottile dello spessore del guscio superiore, i layer del guscio superiore " -"verranno aumentati." +"Tai viršutinio apvalkalo vientisų sluoksnių skaičius, įskaitant viršutinį " +"paviršiaus sluoksnį. Kai pagal šią reikšmę apskaičiuotas storis yra " +"plonesnis už viršutinio apvalkalo storį, viršutinio apvalkalo sluoksnių " +"skaičius bus padidintas." msgid "Top solid layers" -msgstr "Layer solidi superiori" +msgstr "Viršutiniai vientisi sluoksniai" msgid "Top shell thickness" -msgstr "Spessore guscio superiore" +msgstr "Viršutinio apvalkalo storis" msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"Il numero di layer solidi superiori viene aumentato durante lo slicing se lo " -"spessore calcolato dai layer del guscio superiore è più sottile di questo " -"valore. In questo modo si può evitare di avere un guscio troppo sottile " -"quando l'altezza del layer è piccola. Il valore 0 indica che questa " -"impostazione è disattivata e che lo spessore del guscio superiore è " -"determinato in modo assoluto dai layer del guscio superiore." +"Sluoksniuojant didinamas viršutinių vientisų sluoksnių skaičius, jei pagal " +"viršutinius apvalkalo sluoksnius apskaičiuotas storis yra plonesnis už šią " +"vertę. Taip galima išvengti per plono apvalkalo, kai sluoksnių aukštis yra " +"mažas. 0 reiškia, kad šis nustatymas išjungtas ir viršutinio apvalkalo " +"storis visiškai nustatomas pagal viršutinio apvalkalo sluoksnius." -msgid "Speed of travel which is faster and without extrusion" -msgstr "Indica la Velocità di spostamento più rapida e senza estrusione" +msgid "Top surface density" +msgstr "Viršutinio paviršiaus tankis" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Viršutinio paviršiaus sluoksnio tankis. 100 % vertė sukuria visiškai " +"vientisą, lygų viršutinį sluoksnį. Sumažinus šią vertę, viršutinis paviršius " +"tampa tekstūruotas, atsižvelgiant į pasirinktą viršutinio paviršiaus raštą. " +"0 % vertė reiškia, kad bus sukurti tik ant viršutinio sluoksnio sienos. " +"Skirta estetiniais ar funkciniais tikslais, ne tam, kad išspręstų tokias " +"problemas kaip per didelis ekstruzijos kiekis." + +msgid "Bottom surface density" +msgstr "Apatinio paviršiaus tankis" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Apatinio paviršiaus sluoksnio tankis. Skirtas estetinėms arba funkcinėms " +"reikmėms, ne tam, kad išspręstų tokias problemas kaip per didelis " +"ekstruzijos kiekis. \n" +"ĮSPĖJIMAS: Šio parametro sumažinimas gali neigiamai paveikti sluoksnio " +"sukibimą su pagrindu." + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Judėjimo greitis, kuris yra greitesnis ir be ekstruzijos." msgid "Wipe while retracting" -msgstr "Pulisci durante la retrazione" +msgstr "Nuvalyti įtraukiant" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"Questo sposta il nozzle lungo l'ultimo percorso di estrusione quando si " -"ritrae per pulire il materiale fuoriuscito dal nozzle. In questo modo è " -"possibile ridurre al minimo i blob quando si stampa una nuova parte dopo lo " -"spostamento." +"Įtraukiant antgalį judinti išilgai paskutinio išspaudimo kelio, kad būtų " +"išvalyta ant antgalio nutekėjusi medžiaga. Tai gali sumažinti artefaktų " +"kiekį, kai po judėjimo spausdinama nauja dalis." msgid "Wipe Distance" -msgstr "Distanza pulizia" +msgstr "Valymo atstumas" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" -"Scrivi per quanto tempo l'ugello si sposterà lungo l'ultimo percorso quando " -"si ritrae. \n" +"Apibūdinkite, kiek laiko antgalis judės paskutiniu keliu, kai bus " +"įtraukiamas.\n" "\n" -"A seconda della durata dell'operazione di pulizia, della velocità e della " -"durata delle impostazioni di retrazione dell'estrusore/filamento, potrebbe " -"essere necessario un movimento di retrazione per ritrarre il filamento " -"rimanente. \n" +"Priklausomai nuo to, kiek laiko trunka valymo operacija, kokie greiti ir " +"ilgi yra ekstruderio / gijų įtraukimo nustatymai, gali prireikti įtraukimo " +"judesio, kad būtų įtraukta likusi gija.\n" "\n" -"L'impostazione di un valore nella quantità di retrazione prima della " -"cancellazione di seguito eseguirà qualsiasi retrazione in eccesso prima " -"della cancellazione, altrimenti verrà eseguita dopo." +"Nustačius toliau esančio įvilkimo kiekio prieš valymą nustatymo reikšmę, bet " +"koks perteklinis įvilkimas bus atliktas prieš valymą, priešingu atveju jis " +"bus atliktas po jo." msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"La torre di pulizia può essere utilizzata per pulire i residui sul nozzle e " -"stabilizzare la pressione della camera all'interno del nozzle al fine di " -"evitare difetti estetici durante la stampa." +"Valymo bokštas gali būti naudojamas likučiams ant purkštuko išvalyti ir " +"kameros slėgiui purkštuko viduje stabilizuoti, kad spausdinant objektus būtų " +"išvengta paviršiaus defektų." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" -msgstr "Volumi di spurgo" +msgstr "Valymo tūriai" msgid "Flush multiplier" -msgstr "Moltiplicatore spurgo" +msgstr "Išleidimo daugiklis" msgid "" "The actual flushing volumes is equal to the flush multiplier multiplied by " "the flushing volumes in the table." msgstr "" -"I volumi di spurgo effettivi sono pari al moltiplicatore di spurgo " -"moltiplicato per i volumi di spurgo indicati nella tabella." +"Faktinis išleidimo kiekis yra lygus išleidimo daugikliui, padaugintam iš " +"lentelėje nurodytų išleidimo kiekių." msgid "Prime volume" -msgstr "Volume primario" +msgstr "Pagrindinis tūris" msgid "The volume of material to prime extruder on tower." -msgstr "Indica il volume materiale da usare per la Prime Tower." +msgstr "Medžiagos kiekis, skirtas ekstruderiui užpildyti ant bokšto." -msgid "Width of prime tower" -msgstr "Indica la larghezza della Prime Tower." +msgid "Width of the prime tower." +msgstr "Pagrindinio bokšto plotis." msgid "Wipe tower rotation angle" -msgstr "Angolo di rotazione della torre di pulitura" +msgstr "Valymo bokšto sukimosi kampas" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Angolo di rotazione della torre di pulitura rispetto all'asse X." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Valymo bokšto sukimosi kampas x ašies atžvilgiu." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" msgid "Stabilization cone apex angle" -msgstr "Angolo del cono di stabilizzazione" +msgstr "Stabilizavimo kūgio viršūnės kampas" msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Angolo all'apice del cono utilizzato per stabilizzare la torre di pulitura. " -"Un angolo maggiore significa una base più ampia." - -msgid "Wipe tower purge lines spacing" -msgstr "Spaziatura delle linee di spurgo della torre di pulitura" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Spaziatura delle linee di spurgo sulla torre di pulitura." +"Kūgio viršūnės kampas, naudojamas valymo bokštui stabilizuoti. Didesnis " +"kampas reiškia platesnį pagrindą." msgid "Maximum wipe tower print speed" -msgstr "" +msgstr "Didžiausias valymo bokšto spausdinimo greitis" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " @@ -13843,36 +16887,107 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" +"Didžiausias spausdinimo greitis, kai atliekamas valymas valymo bokšte ir " +"spausdinami reti valymo bokšto sluoksniai. Jei valant reto sluoksnio " +"užpildymo greitis arba apskaičiuotas greitis pagal gijos maksimalų tūrinį " +"greitį yra mažesnis, vietoj jo bus naudojamas mažiausias.\n" +"\n" +"Spausdinant retus sluoksnius, jei vidinio perimetro greitis arba " +"apskaičiuotas greitis pagal gijos maksimalų tūrinį greitį yra mažesnis, " +"vietoj jo bus naudojamas mažiausias.\n" +"\n" +"Padidinus šį greitį, gali nukentėti bokšto stabilumas, taip pat padidėti " +"jėga, su kuria purkštuvas susiduria su bet kokiais nelygumais, kurie gali " +"susidaryti ant valymo bokšto.\n" +"\n" +"Prieš didindami šį parametrą daugiau nei numatytasis 90 mm/s, įsitikinkite, " +"kad jūsų spausdintuvas gali patikimai nutiesti tiltą didesniu greičiu ir kad " +"gijos pratekėjimas keičiant įrankį yra gerai kontroliuojamas.\n" +"\n" +"Valymo bokšto išoriniam perimetrui, nepriklausomai nuo šio parametro, " +"naudojamas vidinio perimetro greitis." -msgid "Wipe tower extruder" -msgstr "Estrusore torre di pulitura" +msgid "Wall type" +msgstr "Sienos tipas" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Nuvalymo bokšto išorinės sienos tipas. \n" +"1. Stačiakampis: numatytasis sienos tipas, stačiakampis su fiksuotu pločiu " +"ir aukščiu. \n" +"2. Kūgis: kūgis su apatine išgaubta dalimi, padedančia stabilizuoti nuvalymo " +"bokštą. \n" +"3. Briauna: bokšto sienai pridedamos keturios briaunos, padedančios " +"padidinti stabilumą." + +msgid "Extra rib length" +msgstr "Papildomas briaunų ilgis" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Teigiami dydžiai gali padidinti šoninės briaunos sienelės dydį, o neigiami " +"dydžiai – sumažinti. Tačiau šoninės briaunos sienelės dydis negali būti " +"mažesnis už nustatytą valymo tūrį." + +msgid "Rib width" +msgstr "Briaunų plotis" + +msgid "Rib width." +msgstr "Briaunų plotis." + +msgid "Fillet wall" +msgstr "Užapvalinta siena" + +msgid "The wall of prime tower will fillet." +msgstr "Pagrindinio bokšto siena bus suapvalinta." msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"L'estrusore da utilizzare per la stampa del perimetro della torre di " -"pulitura. Impostare su 0 per utilizzare quello attualmente disponibile " -"(sarebbe preferibile quello non solubile)." +"Ekstruderis, naudojamas spausdinant valymo bokšto perimetrą. Nustatykite į " +"0, kad būtų naudojamas turimas ekstruderis (pageidautina, kad būtų " +"naudojamas netirpus)." msgid "Purging volumes - load/unload volumes" -msgstr "Volumi di spurgo - volumi di carico/scarico" +msgstr "Išleidimo tūriai – pakrovimo/iškrovimo tūriai" msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" -"Questo vettore salva il volume necessario per cambiare da/a ogni strumento " -"usato per la torre di pulitura. Questi valori vengono usati per semplificare " -"la creazione dei volumi di spurgo completi." +"Šis vektorius išsaugo reikiamus tūrius, kad būtų galima pakeisti/į kiekvieną " +"įrankį, naudojamą valymo bokštelyje. Šios vertės naudojamos siekiant " +"supaprastinti toliau pateiktų išvalymo tūrių kūrimą." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13880,69 +16995,95 @@ msgid "" "printed with transparent filament, the mixed color infill will be seen " "outside. It will not take effect, unless the prime tower is enabled." msgstr "" -"Lo spurgo dopo il cambio del filamento verrà eseguito all'interno dei " -"riempimenti degli oggetti. Ciò può ridurre la quantità di rifiuti e ridurre " -"il tempo di stampa. Se le pareti sono stampate con filamenti trasparenti, il " -"riempimento a colori misti sarà visibile. Non avrà effetto a meno che la " -"Prime Tower non sia abilitata." +"Pakeitus giją, valymas bus atliekamas objektų užpildų viduje. Tai gali " +"sumažinti atliekų kiekį ir sutrumpinti spausdinimo laiką. Jei sienos " +"atspausdintos iš skaidraus filamento, mišrios spalvos užpildas bus matomas " +"išorėje. Jis nebus taikomas, nebent įjungtas pirminis bokštas." msgid "" "Purging after filament change will be done inside objects' support. This may " "lower the amount of waste and decrease the print time. It will not take " "effect, unless the prime tower is enabled." msgstr "" -"Lo spurgo dopo il cambio del filamento verrà eseguito all'interno del " -"supporto degli oggetti. Ciò può ridurre la quantità di rifiuti e ridurre il " -"tempo di stampa. Non avrà effetto a meno che non sia abilitata la Prime " -"Tower." +"Pakeitus giją, valymas bus atliekamas objektų atramos viduje. Tai gali " +"sumažinti atliekų kiekį ir sutrumpinti spausdinimo laiką. Tai nebus " +"veiksminga, jei nebus įjungtas pirminis bokštas." msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"Questo oggetto viene utilizzato per spurgare il nozzle dopo un cambio " -"filamento per risparmiare filamento e ridurre il tempo di stampa. I colori " -"degli oggetti saranno mescolati. Non avrà effetto se non è abilitata la " -"Prime Tower." +"Šis objektas bus naudojamas purkštuko valymui po filamento keitimo, siekiant " +"sutaupyti filamento ir sutrumpinti spausdinimo laiką. Dėl to objektų spalvos " +"bus sumaišytos. Tai neveiks, jei nebus įjungtas pagrindinis bokštas." msgid "Maximal bridging distance" -msgstr "Distanza massima bridging" +msgstr "Maksimalus tiltelio atstumas" msgid "Maximal distance between supports on sparse infill sections." -msgstr "Distanza massima tra supporti in sezioni a riempimento sparso." +msgstr "Maksimalus atstumas tarp atramų retose užpildymo dalyse." + +msgid "Wipe tower purge lines spacing" +msgstr "Atstumai tarp valymo bokšto valymo linijų" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Valymo bokšto valymo linijų atstumai." + +msgid "Extra flow for purging" +msgstr "Papildomas srautas valymui" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Papildomas srautas, naudojamas valymo bokšto išleidimo linijoms. Dėl to " +"išleidimo linijos tampa storesnės arba siauresnės nei įprastai. Atstumai " +"reguliuojami automatiškai." + +msgid "Idle temperature" +msgstr "Tuščiosios eigos temperatūra" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Purkštuko temperatūra, kai įrankis šiuo metu nenaudojamas kelių įrankių " +"nustatymuose.Tai naudojama tik tada, kai spausdinimo nustatymuose įjungta " +"Išleidimo prevencija. Nustatykite 0, kad išjungtumėte." msgid "X-Y hole compensation" -msgstr "Compensazione foro X-Y" +msgstr "X-Y angų kompensavimas" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"I fori negli oggetti vengono ingranditi o rimpiccioliti nel piano XY in base " -"al valore impostato. Un valore positivo ingrandisce i fori mentre un valore " -"negativo rimpicciolisce i fori. Questa funzione viene utilizzata per " -"regolare leggermente le dimensioni quando gli oggetti presentano problemi di " -"assemblaggio." +"Objekto angos XY plokštumoje bus padidintos arba sumažintos pagal nustatytą " +"vertę. Teigiama reikšmė didina skyles. Neigiama reikšmė skyles sumažina. Ši " +"funkcija naudojama šiek tiek pakoreguoti dydį, kai objektas turi surinkimo " +"problemų." msgid "X-Y contour compensation" -msgstr "Compensazione contorni X-Y" +msgstr "X-Y kontūro kompensavimas" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"Il contorno degli oggetti viene ingrandito o rimpicciolito nel piano XY in " -"base al valore impostato. I valori positivi ingrandiscono i contorni e " -"quelli negativi li rimpiccioliscono. Questa funzione viene utilizzata per " -"regolare leggermente le dimensioni quando gli oggetti presentano problemi di " -"assemblaggio." +"Objekto kontūras XY plokštumoje bus padidintas arba sumažintas pagal " +"nustatytą vertę. Teigiama reikšmė didina kontūrą. Neigiama reikšmė kontūrą " +"sumažina. Ši funkcija naudojama šiek tiek pakoreguoti dydį, kai objektas yra " +"surenkamas." msgid "Convert holes to polyholes" -msgstr "Conversione di fori in polifori" +msgstr "Konvertuoti skyles į daugiakampes" msgid "" "Search for almost-circular holes that span more than one layer and convert " @@ -13950,100 +17091,95 @@ msgid "" "compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" -"Cercare fori quasi circolari che si estendono su più di un layer e " -"convertire la geometria in polifori. Utilizzare la dimensione del nozzle e " -"il diametro (più grande) per calcolare il poliforo.\n" -"Vedi http://hydraraptor.blogspot.com/2011/02/polyholes.html" +"Ieškokite beveik apskritų skylių, apimančių daugiau nei vieną sluoksnį, ir " +"paverskite geometriją į daugiasluoksnes skyles. Norėdami apskaičiuoti " +"daugialypę skylę, naudokite purkštuko dydį ir (didžiausią) skersmenį.\n" +"Žr. http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" -msgstr "Margine di rilevamento poliforo" +msgstr "Daugiašakių aptikimo riba" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" -"Defezione massima di un punto rispetto al raggio stimato del cerchio.\n" -"Poiché i cilindri vengono spesso esportati come triangoli di dimensioni " -"variabili, i punti potrebbero non trovarsi sulla circonferenza del cerchio. " -"Questa impostazione consente di ampliare il rilevamento.\n" -"In mm o in % of il raggio." +"Didžiausias taško nuokrypis nuo apskaičiuoto apskritimo spindulio.\n" +"Kadangi cilindrai dažnai eksportuojami kaip įvairaus dydžio trikampiai, " +"taškai gali būti ne apskritimo perimetre. Šis nustatymas suteikia tam tikrą " +"laisvę išplėsti aptikimą.\n" +"mm arba % spindulio." msgid "Polyhole twist" -msgstr "Torsione poliforo" +msgstr "Daugiašakės sukimas" msgid "Rotate the polyhole every layer." -msgstr "Ruotare il poliforo in ogni strato." +msgstr "Pasukite daugialypę skylę kiekviename sluoksnyje." msgid "G-code thumbnails" -msgstr "Miniature G-code" +msgstr "G-kodo miniatiūros" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Dimensioni delle immagini da memorizzare in file .gcode e .sl1 / .sl1s, nel " -"seguente formato: \"XxY, XxY, ...\"" +"Nuotraukų dydžiai, saugomi .gcode ir .sl1 / .sl1s failuose tokiu formatu: " +"\"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" -msgstr "Formato miniature del G-code" +msgstr "G-kodo miniatiūrų formatas" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" -"Formato delle miniature del G-code: PNG per la migliore qualità, JPG per la " -"dimensione più piccola, QOI per il firmware con poca memoria" +"G-kodo miniatiūrų formatas: PNG – geriausia kokybė, JPG – mažiausio dydžio, " +"QOI – mažos atminties programinei įrangai." msgid "Use relative E distances" -msgstr "Usa distanze E relative" +msgstr "Naudoti santykinius E atstumus" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" -"L'estrusione relativa è consigliata quando si utilizza l'opzione " -"\"label_objects\". Alcuni estrusori funzionano meglio con questa opzione " -"unckecked (modalità di estrusione assoluta). La torre di pulizia è " -"compatibile solo con la modalità relativa. È consigliato sulla maggior parte " -"delle stampanti. Il valore predefinito è selezionato" +"Naudojant parinktį „label_objects“ rekomenduojama naudoti santykinį " +"išspaudimą. Kai kurie ekstruzijos įrenginiai veikia geriau, jei ši parinktis " +"nepažymėta (absoliučiosios ekstruzijos režimas). Valymo bokštas suderinamas " +"tik su santykiniu režimu. Jį rekomenduojama naudoti daugumoje spausdintuvų. " +"Pagal numatytuosius nustatymus pažymėta." msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" -"La classica generazione di pareti produce pareti con larghezza di estrusione " -"costante e per aree molto sottili viene utilizzato il riempimento degli " -"spazi vuoti. Il motore Arachne produce pareti con larghezza di estrusione " -"variabile." - -msgid "Classic" -msgstr "Classico" +"Klasikinis sienų generatorius sukuria pastovaus pločio sieneles, o labai " +"plonoms sritims užpildyti naudojamas tarpų užpildymas. \"Arachnės\" variklis " +"gamina kintamo išspaudimo pločio sienas." msgid "Arachne" -msgstr "Arachne" +msgstr "Arachnė" msgid "Wall transition length" -msgstr "Lunghezza transizione parete" +msgstr "Sienų perėjimo ilgis" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" -"Quando si passa da un numero di pareti diverso all'altro, man mano che il " -"pezzo diviene più sottile, viene assegnata una certa quantità di spazio per " -"dividere o unire i segmenti di parete. Viene espressa in percentuale " -"rispetto al diametro del nozzle." +"Pereinant nuo vieno sienelių skaičiaus prie kito, kai detalė tampa plonesnė, " +"sienelių segmentams padalyti arba sujungti skiriama tam tikra erdvė. Jis " +"išreiškiamas procentais nuo purkštuko skersmens." msgid "Wall transitioning filter margin" -msgstr "Margine filtro transizione parete" +msgstr "Sienos perėjimo filtro riba" msgid "" "Prevent transitioning back and forth between one extra wall and one less. " @@ -14052,664 +17188,952 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Evita la transizione avanti e indietro tra una parete extra e una in meno. " -"Questo margine estende l'intervallo di estrusione che segue a [Larghezza " -"minima parete - margine, 2 * Larghezza minima parete + margine]. L'aumento " -"di questo margine riduce il numero di transizioni, il che riduce il numero " -"di avvii/arresti dell'estrusione e il tempo di viaggio. Tuttavia, una grande " -"variazione della larghezza di estrusione può portare a problemi di sotto-" -"estrusione o sovra-estrusione. È espresso in percentuale rispetto al " -"diametro delnozzle" +"Neleidžia pereiti iš vienos papildomos sienos į kitą. Ši riba išplečia " +"sekančio išspaudimo pločio diapazoną iki [minimalus sienelės plotis - riba, " +"2 * minimalus sienelės plotis + riba]. Padidinus šią ribą, sumažėja perėjimų " +"skaičius, todėl sumažėja ekstruzijos paleidimų / stabdymų skaičius ir " +"judėjimo laikas. Tačiau dėl didelio ekstruzijos pločio skirtumo gali kilti " +"nepakankamo arba per didelio ekstruzijos pločio problemų. Jis išreiškiamas " +"procentais nuo purkštuko skersmens." msgid "Wall transitioning threshold angle" -msgstr "Angolo soglia transizione parete" +msgstr "Sienų perėjimo slenksčio kampas" msgid "" "When to create transitions between even and odd numbers of walls. A wedge " "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"Quando si creano transizioni tra pareti in numero pari e dispari. Una forma " -"a cuneo con un angolo superiore a questa impostazione non avrà transizioni e " -"non verranno stampate pareti al centro per riempire lo spazio rimanente. " -"Riducendo questa impostazione, si riduce il numero e la lunghezza delle " -"pareti centrali, ma si possono lasciare spazi vuoti o sovraestrusi" +"Kai reikia sukurti perėjimus tarp lyginio ir nelyginio sienų skaičiaus. " +"Pleišto formos, kurios kampas didesnis už šį nustatymą, perėjimų nebus, o " +"centre nebus atspausdintos sienos, kad būtų užpildyta likusi erdvė. " +"Sumažinus šį nustatymą, sumažėja šių centrinių sienelių skaičius ir ilgis, " +"tačiau gali likti tarpų arba jos gali būti per daug išsikišusios." msgid "Wall distribution count" -msgstr "Conteggio distribuzione parete" +msgstr "Sienų pasiskirstymo skaičius" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" -"Il numero di pareti, contati a partire dal centro, sui quali deve essere " -"distribuita la variazione. Valori più bassi indicano che le pareti esterne " -"non cambiano in larghezza" +"Sienų skaičius, skaičiuojant nuo centro, ant kurių reikia paskirstyti " +"pokytį. Mažesnės reikšmės reiškia, kad išorinių sienų plotis nesikeičia." msgid "Minimum feature size" -msgstr "Dimensione minima caratteristica" +msgstr "Minimalus elemento dydis" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Spessore minimo elementi sottili. Gli elementi del modello più sottili di " -"questo valore non verranno stampati, mentre le più spesse della dimensione " -"minima verranno ampliate fino alla larghezza minima della parete. È " -"espresso in percentuale rispetto al diametro del nozzle" +"Mažiausias plonų elementų storis. Modelio elementai, kurie yra plonesni už " +"šią vertę, nebus spausdinami, o elementai, kurie yra storesni už šią vertę, " +"bus praplatinti iki minimalaus sienelės storio. Išreiškiama procentais nuo " +"purkštuko skersmens." msgid "Minimum wall length" -msgstr "Lunghezza minima della parete" +msgstr "Mažiausias sienos ilgis" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" -"Regolare questo valore per evitare la stampa di pareti corte e non chiuse, " -"che potrebbero aumentare il tempo di stampa. Valori più alti rimuovono muri " -"più numerosi e più lunghi.\n" +"Nustatykite šią reikšmę, kad nebūtų spausdinamos trumpos, neuždarytos " +"sienos, dėl kurių gali pailgėti spausdinimo laikas. Didesnės reikšmės " +"pašalina daugiau ir ilgesnių sienelių.\n" "\n" -"NOTA: le superfici inferiore e superiore non saranno influenzate da questo " -"valore per evitare spazi visivi sul lato esterno del modello. Regola " -"\"Soglia di una parete\" nelle impostazioni avanzate di seguito per regolare " -"la sensibilità di ciò che è considerato una superficie superiore. 'Una " -"soglia muro' è visibile solo se questa impostazione è impostata al di sopra " -"del valore predefinito di 0,5 o se è abilitata l'opzione Superfici superiori " -"a parete singola." +"PASTABA: Apatiniams ir viršutiniams paviršiams ši reikšmė įtakos neturės, " +"kad modelio išorėje nesusidarytų vizualūs tarpai. Toliau esančiuose " +"išplėstiniuose nustatymuose sureguliuokite Vienos sienelės slenkstis, kad " +"nustatytumėte jautrumą, kas laikoma viršutiniu paviršiumi. Vienos sienelės " +"slenkstis matomas tik tada, jei šis nustatymas nustatytas didesnis už " +"numatytąją vertę 0,5 arba jei įjungta vienos sienelės viršutinių paviršių " +"funkcija." msgid "First layer minimum wall width" -msgstr "Larghezza minima della parete del primo strato" +msgstr "Pirmojo sluoksnio mažiausias sienos plotis" msgid "" "The minimum wall width that should be used for the first layer is " "recommended to be set to the same size as the nozzle. This adjustment is " "expected to enhance adhesion." msgstr "" -"Si consiglia di impostare la larghezza minima della parete da utilizzare per " -"il primo strato alla stessa dimensione del nozzle. Si prevede che questo " -"aggiustamento migliorerà l'adesione." +"Mažiausią sienos plotį, kuris turėtų būti naudojamas pirmajam sluoksniui, " +"rekomenduojama nustatyti tokio pat dydžio, kaip ir purkštukas. Manoma, kad " +"šis nustatymas pagerins sukibimą." msgid "Minimum wall width" -msgstr "Larghezza minima parete" +msgstr "Mažiausias sienos plotis" msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" -"Larghezza della parete che sostituirà gli elementi sottili (in base alla " -"dimensione minima dell'elemento) del modello. Se la larghezza minima della " -"parete è più sottile dello spessore dell'elemento, la parete diventerà " -"spessa quanto l'elemento stesso. È espresso in percentuale rispetto al " -"diametro del nozzle" +"Sienos, kuri pakeis plonus modelio elementus, plotis (pagal minimalų " +"elemento dydį). Jei Minimalus sienos plotis yra plonesnis už elemento storį, " +"siena taps tokio pat storio kaip ir pats elementas. Jis išreiškiamas " +"procentais nuo purkštuko skersmens." msgid "Detect narrow internal solid infill" -msgstr "Rileva riempimento solido interno stretto" +msgstr "Aptikti siaurą vidinį vientisą užpildą" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"Questa rileva automaticamente le aree interne strette di riempimento solido. " -"Se abilitato, la trama concentrica verrà utilizzato per l'area per " -"velocizzare la stampa. Altrimenti, la trama rettilinea verrà utilizzata per " -"impostazione predefinita." +"Ši parinktis automatiškai nustato siaurą vidinę vientiso užpildo sritį. Jei " +"ši parinktis įjungta, šiai sričiai bus naudojamas koncentrinis raštas, kad " +"būtų pagreitintas spausdinimas. Priešingu atveju pagal numatytuosius " +"nustatymus naudojamas tiesiaeigis raštas." msgid "invalid value " -msgstr "Valore non valido " +msgstr "netinkama reikšmė " msgid "Invalid value when spiral vase mode is enabled: " -msgstr "Valore non valido quando la modalità vaso a spirale è abilitata: " +msgstr "Netinkama reikšmė, kai įjungtas spiralinės vazos režimas: " msgid "too large line width " -msgstr "larghezza della linea troppo grande " +msgstr "per didelis linijos plotis " msgid " not in range " -msgstr " fuori portata " +msgstr " nepatenka į intervalą " -msgid "Minimum save" -msgstr "Salvataggio minimo" +msgid "Export 3MF" +msgstr "Eksportuoti 3MF" -msgid "export 3mf with minimum size." -msgstr "Esporta 3MF con dimensione minima." +msgid "Export project as 3MF." +msgstr "Eksportuokite projektą kaip 3MF." -msgid "No check" -msgstr "Nessun controllo" +msgid "Export slicing data" +msgstr "Eksportuoti sluoksniavimo duomenis" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Export slicing data to a folder." +msgstr "Eksportuoti sluoksniavimo duomenis į katalogą." + +msgid "Load slicing data" +msgstr "Įkelti sluoksniavimo duomenis" + +msgid "Load cached slicing data from directory." +msgstr "Įkelti į talpyklą įrašytus pjaustymo duomenis iš katalogo." + +msgid "Export STL" +msgstr "Eksportuoti STL" + +msgid "Export the objects as single STL." +msgstr "Eksportuoti visus objektus kaip vieną STL." + +msgid "Export multiple STLs" +msgstr "Eksportuoti kaip kelis STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Eksportuokite objektus kaip kelis STL į katalogą." + +msgid "Slice" +msgstr "Sluoksniuoti" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" msgstr "" -"Non eseguire alcun controllo di validità, come il controllo dei conflitti di " -"percorso del G-code." +"Sluoksniuoja plokštes: 0-visos plokštės, i-plokštė i, kitos-negaliojančios" -msgid "Ensure on bed" -msgstr "Accerta che sia sul piano" +msgid "Show command help." +msgstr "Rodoma komandos pagalba." + +msgid "UpToDate" +msgstr "Atnaujinta" + +msgid "Update the config values of 3MF to latest." +msgstr "Atnaujinti 3MF konfigūracijos reikšmes į naujausias." + +msgid "downward machines check" +msgstr "tikrinti mažėjančias mašinas" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"check whether current machine downward compatible with the machines in the " +"list." msgstr "" -"Sollevare l'oggetto sopra il letto quando è parzialmente sotto. Disabilitato " -"per impostazione predefinita" +"patikrinti, ar dabartinė mašina yra suderinama su sąraše esančiomis " +"mašinomis." + +msgid "Load default filaments" +msgstr "Įkelti numatytąsias gijas" + +msgid "Load first filament as default for those not loaded." +msgstr "Įkelti pirmąją giją kaip numatytąją neįkeltoms gijoms." + +msgid "Minimum save" +msgstr "Minimalus išsaugojimas" + +msgid "Export 3MF with minimum size." +msgstr "eksportuoti mažiausio dydžio 3MF." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "maksimalus trikampių skaičius plokštelėje sluoksniavimui." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "maksimalus vienos plokštės sluoksniavimo laikas sekundėmis." + +msgid "No check" +msgstr "Netikrinama" + +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" +"Nevykdyti jokių galiojimo patikrinimų, pvz., gkodo kelio konfliktų " +"patikrinimo." + +msgid "Normative check" +msgstr "Normatyvinė patikra" + +msgid "Check the normative items." +msgstr "Patikrinti norminius elementus." + +msgid "Output Model Info" +msgstr "Išvesti modelio informaciją" + +msgid "Output the model's information." +msgstr "Išvedama modelio informacija." + +msgid "Export Settings" +msgstr "Eksportavimo nustatymai" + +msgid "Export settings to a file." +msgstr "Nustatymai eksportuojami į failą." + +msgid "Send progress to pipe" +msgstr "Siųsti pažangą į kanalą" + +msgid "Send progress to pipe." +msgstr "Siųsti pažangą į kanalą." + +msgid "Arrange Options" +msgstr "Išdėstymo parinktys" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Išdėstymo parinktys: 0-išjungti, 1-įjungti, kiti-automatiniai" + +msgid "Repetition count" +msgstr "Pakartojimų skaičius" + +msgid "Repetition count of the whole model." +msgstr "Viso modelio pasikartojimų skaičius." + +msgid "Ensure on bed" +msgstr "Užtikrinti ant pagrindo" + +msgid "" +"Lift the object above the bed when it is partially below. Disabled by " +"default." +msgstr "" +"Pakelti daiktą virš pagrindo, kai jis iš dalies yra žemiau. Pagal " +"numatytuosius nustatymus išjungta." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Pateiktus modelius išdėstyti ant pagrindo ir sujungti į vieną modelį, kad " +"vieną kartą atliktumėte veiksmus." + +msgid "Convert Unit" +msgstr "Konvertuoti vienetus" + +msgid "Convert the units of model." +msgstr "Konvertuoti modelio matavimo vienetus." msgid "Orient Options" -msgstr "Opzioni di orientamento" +msgstr "Orientacijos parinktys" msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "Opzioni di orientamento: 0-disabilita, 1-abilita, altri-auto" +msgstr "Orientacijos parinktys: 0-išjungti, 1-įjungti, kiti-automatiniai" msgid "Rotation angle around the Z axis in degrees." -msgstr "Angolo di rotazione attorno all'asse Z in gradi." +msgstr "Sukimosi kampas aplink Z ašį laipsniais." + +msgid "Rotate around X" +msgstr "Pasukti aplink X ašį" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Pasukimo kampas aplink X ašį laipsniais." msgid "Rotate around Y" -msgstr "Ruota attorno ad Y" +msgstr "Pasukti aplink Y" msgid "Rotation angle around the Y axis in degrees." -msgstr "Angolo di rotazione sull'asse Y in gradi." +msgstr "Sukimosi kampas aplink Y ašį laipsniais." + +msgid "Scale the model by a float factor." +msgstr "Modelio mastelio keitimas pagal kintamąjį koeficientą." + +msgid "Load General Settings" +msgstr "Įkelti bendruosius nustatymus" + +msgid "Load process/machine settings from the specified file." +msgstr "Įkelti proceso / mašinos nustatymus iš nurodyto failo." + +msgid "Load Filament Settings" +msgstr "Įkelti gijų nustatymus" + +msgid "Load filament settings from the specified file list." +msgstr "Įkelti gijų nustatymus iš nurodyto failų sąrašo." + +msgid "Skip Objects" +msgstr "Praleisti objektus" + +msgid "Skip some objects in this print." +msgstr "Praleisti kai kuriuos šio spausdinimo objektus." + +msgid "Clone Objects" +msgstr "Klonuoti objektus" + +msgid "Clone objects in the load list." +msgstr "Įkrovos sąraše esančių objektų klonavimas." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "Naudojant „Naujausius“, įkelkite naujausius proceso/mašinos nustatymus" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Įkelti \"naujausio\" proceso/įrenginio nustatymus iš nurodyto failo, kai " +"naudojamas \"naujausias\"." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "Naudojant „naujausius“, įkelkite naujausius gijos nustatymus" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Naudojant „naujausius“, įkelti naujausius gijų nustatymus iš nurodyto failo." + +msgid "Downward machines check" +msgstr "Tolimesnių sąraše esančių mašinų patikra" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Jei įjungta, patikrinkite, ar dabartinė mašina yra suderinama su sąraše " +"esančiomis mašinomis." + +msgid "downward machines settings" +msgstr "tolimesnių mašinų nustatymas" + +msgid "The machine settings list needs to do downward checking." +msgstr "Mašinos nustatymų sąraše reikia atlikti žemyn einantį tikrinimą." + +msgid "Load assemble list" +msgstr "Įkelti surinkimo sąrašą" + +msgid "Load assemble object list from config file." +msgstr "Surinkimo objektų sąrašo įkėlimas iš konfigūracijos failo." msgid "Data directory" -msgstr "Directory dati" +msgstr "Duomenų katalogas" msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" -"Carica e archivia le impostazione in una data cartella. Questo è utile per " -"mantenere diversi profili o aggiungere configurazioni da un archivio di rete." +"Įkelkite ir išsaugokite nustatymus nurodytame kataloge. Tai naudinga norint " +"išlaikyti skirtingus profilius arba įtraukti konfigūracijas iš tinklo " +"saugyklos." -msgid "Load custom gcode" -msgstr "Carica gcode personalizzato" +msgid "Output directory" +msgstr "Išvesties katalogas" -msgid "Load custom gcode from json" -msgstr "Carica gcode personalizzato da json" +msgid "Output directory for the exported files." +msgstr "Eksportuojamų failų išvesties katalogas." -msgid "Current z-hop" -msgstr "Z-hop corrente" +msgid "Debug level" +msgstr "Derinimo lygis" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" msgstr "" -"Contiene gli z-hop presenti all'inizio del blocco di G-code personalizzato." +"Nustato derinimo žurnalizavimo lygį. 0: mirtinas, 1: klaida, 2: įspėjimas, " +"3: informacija, 4: derinimas, 5: sekimas\n" + +msgid "Enable timelapse for print" +msgstr "Laiko intervalų spausdinimui įjungimas" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" +"Jei įjungta, šis sluoksniavimas bus atliekamas naudojant laiko intervalą." + +msgid "Load custom G-code" +msgstr "Įkelti pasirinktinį G-kodą" + +msgid "Load custom G-code from json." +msgstr "Įkelti pasirinktinį G kodą iš json." + +msgid "Load filament IDs" +msgstr "Įkelti gijų ID" + +msgid "Load filament IDs for each object." +msgstr "Įkelkite kiekvieno objekto gijų identifikatorius." + +msgid "Allow multiple colors on one plate" +msgstr "Leisti skirtingas spalvas ant tos pačios plokštės" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "Jei įjungta, išdėstymas leis kelias spalvas ant vienos plokštės." + +msgid "Allow rotation when arranging" +msgstr "Išdėstant leisti pasukti" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "Jei įjungta, išdėstant objektus bus leidžiami pasukimai." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Išdėstant vengti išspaudimo kalibravimo ploto" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Jei įjungta, išdėstant objektus bus vengiama išspaudimo kalibravimo srities." + +msgid "Skip modified G-code in 3MF" +msgstr "Praleisti modifikuotus gkodus 3MF" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Praleiskite modifikuotą G kodą 3MF iš spausdintuvo arba gijos nustatymų." + +msgid "MakerLab name" +msgstr "MakerLab pavadinimas" + +msgid "MakerLab name to generate this 3MF." +msgstr "„MakerLab“ pavadinimas šiam 3MF generuoti." + +msgid "MakerLab version" +msgstr "„MakerLab“ versija" + +msgid "MakerLab version to generate this 3MF." +msgstr "„MakerLab“ versija šiam 3MF generuoti." + +msgid "Metadata name list" +msgstr "Metaduomenų pavadinimų sąrašas" + +msgid "metadata name list added into 3MF." +msgstr "metaduomenų pavadinimų sąrašas įtrauktas į 3MF." + +msgid "Metadata value list" +msgstr "Metaduomenų reikšmių sąrašas" + +msgid "metadata value list added into 3MF." +msgstr "į 3MF įtrauktas metaduomenų reikšmių sąrašas." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Leisti 3MF su naujesne versija sluoksniuoti" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Leisti sluoksniuoti 3MF su naujesne versija." + +msgid "Current Z-hop" +msgstr "Dabartinis Z-šuolis" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "Turi Z-šuolį, esantį pasirinktinio G-kodo bloko pradžioje." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" -"Posizione dell'estrusore all'inizio del blocco di G-code personalizzato. Se " -"il G-code personalizzato si sposta da un'altra parte, dovrebbe scrivere in " -"questa variabile in modo che PrusaSlicer sappia da dove proviene quando " -"riprende il controllo." +"Ekstruderio padėtis pasirinktinio G-kodo bloko pradžioje. Jei pasirinktinis " +"G-kodas juda kur nors kitur, jis turėtų būti įrašytas į šį kintamąjį, kad " +"Snapmaker Orca žinotų, iš kur jis juda, kai atgauna valdymą." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -"Stato di retrazione all'inizio del blocco di G-code personalizzato. Se il G-" -"code personalizzato sposta l'asse dell'estrusore, deve scrivere su questa " -"variabile in modo che PrusaSlicer effettui correttamente la deretrazione " -"quando riprende il controllo." +"Įtraukimo būsena pasirinktinio G-kodo bloko pradžioje. Jei pasirinktinis G-" +"kodas judina ekstruderio ašį, jis turėtų įrašyti į šį kintamąjį, kad " +"Snapmaker Orca teisingai atšauktų įtraukimą, kai atgaus valdymą." -msgid "Extra deretraction" -msgstr "Deretrazione aggiuntiva" +msgid "Extra de-retraction" +msgstr "Papildomas ištraukimas" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "Šiuo metu planuojamas papildomas ekstruderio užpildymas po ištraukimo." + +msgid "Absolute E position" +msgstr "Absoliuti E padėtis" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" -"Attualmente è previsto un priming aggiuntivo dell'estrusore dopo la " -"deretrazione." +"Dabartinė ekstruderio ašies padėtis. Naudojama tik su absoliučiu ekstruderio " +"adresavimu." msgid "Current extruder" -msgstr "Estrusore attuale" +msgstr "Dabartinis ekstruderis" msgid "Zero-based index of currently used extruder." -msgstr "Indice a base zero dell'estrusore attualmente utilizzato." +msgstr "Zero-based index of currently used extruder." msgid "Current object index" -msgstr "Indice dell'oggetto corrente" +msgstr "Dabartinio objekto indeksas" msgid "" "Specific for sequential printing. Zero-based index of currently printed " "object." msgstr "" -"Specifico per la stampa sequenziale. Indice a base zero dell'oggetto " -"attualmente stampato." +"Specifinis nuoseklaus spausdinimo būdas. Šiuo metu spausdinamo objekto " +"indeksas (pradedant nuliu)." msgid "Has wipe tower" -msgstr "Ha una torre di pulitura" +msgstr "Turi valymo bokštą" msgid "Whether or not wipe tower is being generated in the print." -msgstr "Se la torre di pulitura viene generata o meno nella stampa." +msgstr "Ar spausdinant generuojamas nuvalymo bokštas." msgid "Initial extruder" -msgstr "Estrusore iniziale" +msgstr "Pradinis ekstruderis" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_tool." msgstr "" -"Indice a base zero del primo estrusore utilizzato nella stampa. Come " -"initial_tool." +"Pirmojo spausdinimui naudojamo ekstruderio indeksas (pradedant nuliu). Toks " +"pat kaip initial_tool." msgid "Initial tool" -msgstr "Strumento iniziale" +msgstr "Pradinis įrankis" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_extruder." msgstr "" -"Indice a base zero del primo estrusore utilizzato nella stampa. Come " -"initial_extruder." +"Pirmojo spausdinimui naudojamo ekstruderio indeksas pagal nulį. Toks pat " +"kaip initial_extruder." msgid "Is extruder used?" -msgstr "Viene usato l'estrusore?" +msgstr "Ar naudojamas ekstruderis?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" -"Vettore di booleani che indica se un determinato estrusore viene utilizzato " -"nella stampa." +"Loginių reikšmių vektorius, nurodantis, ar spausdinant naudojamas tam tikras " +"ekstruderis." + +msgid "Has single extruder MM priming" +msgstr "Turi vieną ekstruderį MM užpildymui" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Ar šiame spaudinyje naudojami papildomi kelių medžiagų pagrindo regionai?" msgid "Volume per extruder" -msgstr "Volume per estrusore" +msgstr "Vieno ekstruderio tūris" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -"Volume totale di filamento estruso per estrusore durante l'intera stampa." +"Bendras gijų tūris, išspaustas iš vieno ekstruderio per visą spausdinimo " +"procesą." -msgid "Total toolchanges" -msgstr "Totale cambi utensile" +msgid "Total tool changes" +msgstr "Bendras įrankių keitimų skaičius" -msgid "Number of toolchanges during the print." -msgstr "Numero di cambi strumenti durante la stampa." +msgid "Number of tool changes during the print." +msgstr "Spausdinimo metu atliktų įrankių pakeitimų skaičius." msgid "Total volume" -msgstr "Volume totale" +msgstr "Bendras tūris" msgid "Total volume of filament used during the entire print." -msgstr "Volume totale di filamento utilizzato durante l'intera stampa." +msgstr "Bendras viso spausdinimo metu sunaudotas gijų tūris." msgid "Weight per extruder" -msgstr "Peso per estrusore" +msgstr "Svoris vienam ekstruderiui" msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." msgstr "" -"Peso per estrusore estruso durante l'intera stampa. Calcolato dal valore " -"filament_density in Impostazioni filamento." +"Vieno ekstruderio išspaustas gijų svoris per visą spausdinimo procesą. " +"Apskaičiuojama pagal filament_density vertę Gijų nustatymuose." msgid "Total weight" -msgstr "Peso totale" +msgstr "Bendras svoris" msgid "" "Total weight of the print. Calculated from filament_density value in " "Filament Settings." msgstr "" -"Peso totale della stampa. Calcolato dal valore filament_density in " -"Impostazioni filamento." +"Bendras spaudinio svoris. Apskaičiuojama pagal filament_density vertę Gijos " +"nustatymuose." msgid "Total layer count" -msgstr "Numero totale di layer" +msgstr "Bendras sluoksnių skaičius" msgid "Number of layers in the entire print." -msgstr "Numero di layer dell'intera stampa." +msgstr "Viso spaudinio sluoksnių skaičius." msgid "Number of objects" -msgstr "Numero di oggetti" +msgstr "Objektų skaičius" msgid "Total number of objects in the print." -msgstr "Numero totale di oggetti nella stampa." +msgstr "Bendras atspausdintų objektų skaičius." msgid "Number of instances" -msgstr "Numero di istanze" +msgstr "Egzempliorių skaičius" msgid "Total number of object instances in the print, summed over all objects." msgstr "" -"Numero totale di istanze di oggetti nella stampa, sommato a tutti gli " -"oggetti." +"Bendras atspausdintų objektų egzempliorių skaičius, sumuojamas visiems " +"objektams." msgid "Scale per object" -msgstr "Scala per oggetto" +msgstr "Mastelis pagal objektą" msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" -"Contiene una stringa con le informazioni sul ridimensionamento applicato ai " -"singoli oggetti. L'indicizzazione degli oggetti è a base zero (il primo " -"oggetto ha indice 0).\n" -"Esempio: 'x:100% y:50% z:100'." +"Pateikiama eilutė su informacija apie tai, koks mastelio keitimas buvo " +"pritaikytas atskiriems objektams. Objektai indeksuojami nuo nulio (pirmasis " +"objektas turi indeksą 0).\n" +"Pavyzdys: \"x:100% y:50% z:100%\"." msgid "Input filename without extension" -msgstr "Nome del file di input senza estensione" +msgstr "Įvesties failo pavadinimas be plėtinio" msgid "Source filename of the first object, without extension." -msgstr "Nome del file sorgente del primo oggetto, senza estensione." +msgstr "Pirmojo objekto šaltinio failo pavadinimas be plėtinio." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "" -"Il vettore ha due elementi: le coordinate x e y del punto. Valori in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." +msgstr "Vektorių sudaro du elementai: taško x ir y koordinatės. Vertės mm." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" -"Il vettore ha due elementi: le dimensioni x e y della bounding box. Valori " -"in mm." +"Vektorių sudaro du elementai: x ir y ribojančio bloko matmenys. Reikšmės mm." msgid "First layer convex hull" -msgstr "Inviluppo convesso del primo strato" +msgstr "Pirmojo sluoksnio išgaubtasis korpusas" msgid "" "Vector of points of the first layer convex hull. Each element has the " "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" -"Vettore di punti dell'inviluppo convesso del primo layer. Ogni elemento ha " -"il seguente formato: '[x, y]' (x e y sono numeri in virgola mobile in mm)." +"Pirmojo sluoksnio išgaubtojo korpuso taškų vektorius. Kiekvienas elementas " +"yra tokio formato: \"[x, y]\" (x ir y yra slankiojo kablelio skaičiai mm)." msgid "Bottom-left corner of first layer bounding box" -msgstr "Angolo inferiore sinistro della bounding box del primo layer" +msgstr "Pirmojo sluoksnio ribų lango apatinis kairysis kampas" msgid "Top-right corner of first layer bounding box" -msgstr "Angolo superiore destro della bounding box del primo layer" +msgstr "Pirmojo sluoksnio ribų lango viršutinis dešinysis kampas" msgid "Size of the first layer bounding box" -msgstr "Dimensione della bounding box del primo layer" +msgstr "Pirmojo sluoksnio ribų lango dydis" msgid "Bottom-left corner of print bed bounding box" -msgstr "Angolo in basso a sinistra della bounding box del piano di stampa" +msgstr "Spausdinimo pagrindo ribų lango apatinis kairysis kampas" msgid "Top-right corner of print bed bounding box" -msgstr "Angolo superiore destro della bounding box del piano di stampa" +msgstr "Viršutinis dešinysis spausdinimo pagrindo ribų lango kampas" msgid "Size of the print bed bounding box" -msgstr "Dimensione della bounding box del piano di stampa" +msgstr "Spausdinimo pagrindo ribojančio lango dydis" msgid "Timestamp" -msgstr "Timestamp" +msgstr "Laiko žyma" msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "Stringa contenente l'ora corrente nel formato yyyyMMdd-hhmmss." +msgstr "Eilutė, kurioje nurodomas dabartinis laikas formatu yyyyMMdd-hhmmss." msgid "Day" -msgstr "Giorno" +msgstr "Diena" msgid "Hour" -msgstr "Ora" +msgstr "Valanda" msgid "Minute" -msgstr "Minuto" +msgstr "Minutės" + +msgid "Second" +msgstr "Antrasis" msgid "Print preset name" -msgstr "Nome del preset di stampa" +msgstr "Spausdinimo nustatymų pavadinimas" msgid "Name of the print preset used for slicing." -msgstr "Nome del preset di stampa utilizzato per lo slicing." +msgstr "Spausdinimo nustatymų, naudojamų sluoksniavimui, pavadinimas." msgid "Filament preset name" -msgstr "Nome del preset del filamento" +msgstr "Gijos nustatymų pavadinimas" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Nomi dei preset di filamento utilizzati per lo slicing. La variabile è un " -"vettore contenente un nome per ogni estrusore." +"Sluoksniavimui naudojamų gijų nustatymų pavadinimai. Kintamasis yra " +"vektorius, kuriame yra po vieną kiekvieno ekstruderio pavadinimą." msgid "Printer preset name" -msgstr "Nome del preset della stampante" +msgstr "Spausdintuvo nustatymų pavadinimas" msgid "Name of the printer preset used for slicing." -msgstr "Nome del preset della stampante utilizzato per lo slicing." +msgstr "Sluoksniavimui naudojamo spausdintuvo nustatymų pavadinimas." msgid "Physical printer name" -msgstr "Nome della stampante fisica" +msgstr "Fizinio spausdintuvo pavadinimas" msgid "Name of the physical printer used for slicing." -msgstr "Nome della stampante fisica utilizzata per lo slicing." +msgstr "Fizinio spausdintuvo, naudojamo sluoksniavimui, pavadinimas." + +msgid "Number of extruders" +msgstr "Ekstruderių skaičius" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Bendras ekstruderių skaičius, neatsižvelgiant į tai, ar jie naudojami " +"dabartiniame spausdinime." msgid "Layer number" -msgstr "Numero del layer" +msgstr "Sluoksnio numeris" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." -msgstr "" -"Indice del layer corrente. Basato su uno (cioè il primo livello è il numero " -"1)." +msgstr "Dabartinio sluoksnio indeksas (pirmasis sluoksnis turi numerį 1)." -msgid "Layer z" -msgstr "Layer Z" +msgid "Layer Z" +msgstr "Sluoksnis z" msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." msgstr "" -"Altezza del layer attuale sopra il piano di stampa, misurata fino alla parte " -"superiore del layer." +"Dabartinio sluoksnio aukštis virš spausdinimo pagrindo, matuojamas iki " +"sluoksnio viršaus." -msgid "Maximal layer z" -msgstr "Layer massimo z" +msgid "Maximal layer Z" +msgstr "Maksimalusis sluoksnis z" msgid "Height of the last layer above the print bed." -msgstr "Altezza dell'ultimo layer sopra il piano di stampa." +msgstr "Paskutinio sluoksnio aukštis virš spausdinimo pagrindo." msgid "Filament extruder ID" -msgstr "ID estrusore di filamento" +msgstr "Gijų ekstruderio ID" msgid "The current extruder ID. The same as current_extruder." -msgstr "L'ID dell'estrusore corrente. Come current_extruder." +msgstr "Dabartinis ekstruderio ID. Toks pat kaip current_extruder." msgid "Error in zip archive" -msgstr "Errore nell'archivio zip" +msgstr "Klaida zip archyve" msgid "Generating walls" -msgstr "Generazione pareti" +msgstr "Sienų generavimas" msgid "Generating infill regions" -msgstr "Generazione regioni di riempimento" +msgstr "Užpildomų regionų kūrimas" msgid "Generating infill toolpath" -msgstr "Generazione percorso utensile di riempimento" +msgstr "Užpildymo įrankių trajektorijų generavimas" msgid "Detect overhangs for auto-lift" -msgstr "Rilevare le sporgenze per il sollevamento automatico" - -msgid "Generating support" -msgstr "Generazione supporto" +msgstr "Aptikti iškyšas automatiniam pakėlimui" msgid "Checking support necessity" -msgstr "Verifica necessità di supporto" +msgstr "Atramų reikalingumo tikrinimas" msgid "floating regions" -msgstr "regioni galleggianti" +msgstr "ore kabančių sektoriių" msgid "floating cantilever" -msgstr "cantilever galleggiante" +msgstr "ore kabančią konstrukciją" msgid "large overhangs" -msgstr "ampie sporgenze" +msgstr "didelių iškyšų" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"Sembra che l'oggetto %s ha %s. Orienta nuovamente l'oggetto o abilita la " -"generazione dei supporti." +"Atrodo, kad objektas %s turi %s. Prašome perorientuoti objektą arba įjungti " +"atramų generavimą." + +msgid "Generating support" +msgstr "Atramų generavimas" msgid "Optimizing toolpath" -msgstr "Ottimizzazione del percorso utensile" +msgstr "Įrankių trajektorijų optimizavimas" msgid "Slicing mesh" -msgstr "Slicing mesh" +msgstr "Figūros sluoksniavimas" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"Non sono stati rilevati layers. Ripara il file STL o controlla le dimensioni " -"o lo spessore e riprova.\n" +"Sluoksnių neaptikta. Galbūt reikėtų pataisyti STL failą (-us) arba " +"patikrinti jų dydį ar storį ir bandyti dar kartą.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"La compensazione delle dimensioni XY di un oggetto non verrà utilizzata " -"perché è anche dipinta a colori.\n" -"La compensazione delle dimensioni XY non può essere combinata con la " -"colorazione." +"Objekto XY dydžio kompensavimas nebus naudojamas, nes objektas taip pat yra " +"spalvotas.\n" +"XY dydžio kompensavimas negali būti derinamas su spalviniu dažymu." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Supporto: generazione percorso utensile al layer %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Objektui įjungtas XY dydžio kompensavimas, kuris nebus naudojamas, nes jis " +"taip pat naudoja grublėtą paviršių.\n" +"XY dydžio kompensavimas negali būti derinamas su nelygiu paviršiumi." -msgid "Support: detect overhangs" -msgstr "Supporto: rilevamento sporgenze" +msgid "Object name" +msgstr "Objekto pavadinimas" msgid "Support: generate contact points" -msgstr "Supporto: generazione punti di contatto" +msgstr "Atramos: generuoti kontaktinius taškus" -msgid "Support: propagate branches" -msgstr "Supporto: propagazione rami" +msgid "Loading of a model file failed." +msgstr "Nepavyko įkelti modelio failo." -msgid "Support: draw polygons" -msgstr "Supporto: disegno poligoni" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Supporto: generazione percorso utensile" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Supporto: generazione poligoni al layer %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Supporto: correzione dei buchi nel layer %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Supporto: propagazione rami al layer %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Pateikto failo nepavyko perskaityti, nes jis tuščias" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .stl, .obj " -"o .amf(.xml)." - -msgid "Loading of a model file failed." -msgstr "Caricamento file del modello non riuscito." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Impossibile leggere il file fornito perché è vuoto." +"Nežinomas failo formatas. Įvesties failo plėtinys turi būti .stl, .obj, ." +"amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." +"Nežinomas failo formatas. Įvesties failo plėtinys turi būti .3mf arba .zip." "amf." -msgid "Canceled" -msgstr "Annullato" - msgid "load_obj: failed to parse" -msgstr "load_obj: analisi non riuscita" +msgstr "load_obj: nepavyko apdoroti" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "įkelti mtl į obj: nepavyko apdoroti" msgid "The file contains polygons with more than 4 vertices." -msgstr "Il file contiene poligoni con più di 4 vertici." +msgstr "Faile yra daugiakampių, turinčių daugiau nei 4 viršūnes." msgid "The file contains polygons with less than 2 vertices." -msgstr "Il file contiene poligoni con meno di 2 vertici." +msgstr "Faile yra daugiakampių, turinčių mažiau nei 2 viršūnes." msgid "The file contains invalid vertex index." -msgstr "Il file contiene un indice dei vertici non valido." +msgstr "Faile yra neteisingas viršūnių indeksas." msgid "This OBJ file couldn't be read because it's empty." -msgstr "Impossibile leggere il file OBJ perché è vuoto." +msgstr "Šio OBJ failo nepavyko perskaityti, nes jis tuščias." msgid "Flow Rate Calibration" -msgstr "Calibrazione della portata" +msgstr "Srauto kalibravimas" msgid "Max Volumetric Speed Calibration" -msgstr "Calibrazione della velocità volumetrica massima" +msgstr "Didžiausio tūrio greičio kalibravimas" msgid "Manage Result" -msgstr "Gestisci risultato" +msgstr "Tvarkyti rezultatus" msgid "Manual Calibration" -msgstr "Calibrazione manuale" +msgstr "Rankinis kalibravimas" msgid "Result can be read by human eyes." -msgstr "Il risultato può essere letto da occhi umani." +msgstr "Rezultatą galima nustatyti žmogaus akimis." msgid "Auto-Calibration" -msgstr "Calibrazione automatica" +msgstr "Automatinis kalibravimas" msgid "We would use Lidar to read the calibration result" -msgstr "Utilizzeremmo il Lidar per leggere il risultato della calibrazione" +msgstr "Kalibravimo rezultatams nuskaityti naudotume lidarą" msgid "Prev" -msgstr "Precedente" +msgstr "Prieš" msgid "Recalibration" -msgstr "Ricalibrazione" +msgstr "Perkalibruoti" msgid "Calibrate" -msgstr "Calibra" +msgstr "Kalibruoti" msgid "Finish" -msgstr "Fine" +msgstr "Baigti" msgid "How to use calibration result?" -msgstr "Come utilizzare il risultato della calibrazione?" +msgstr "Kaip naudoti kalibravimo rezultatus?" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" -"È possibile modificare il fattore di calibrazione della dinamica del flusso " -"nella modifica del materiale" +"Srauto dinamikos kalibravimo koeficientą galite pakeisti redaguodami medžiagą" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" -"La versione corrente del firmware della stampante non supporta la " -"calibrazione.\n" -"Aggiornare il firmware della stampante." +"Dabartinė spausdintuvo programinės įrangos versija nepalaiko kalibravimo.\n" +"Atnaujinkite spausdintuvo programinę įrangą." msgid "Calibration not supported" -msgstr "Calibrazione non supportata" +msgstr "Kalibravimas nepalaikomas" msgid "Error desc" -msgstr "Errore desc" +msgstr "Klaidų aprašas" msgid "Extra info" -msgstr "Ulteriori informazioni" +msgstr "Papildoma informacija" msgid "Flow Dynamics" -msgstr "Dinamica del flusso" +msgstr "Srauto dinamika" msgid "Flow Rate" -msgstr "Flusso" +msgstr "Srautas" msgid "Max Volumetric Speed" -msgstr "Massima velocità volumetrica" +msgstr "Didžiausias tūrinis greitis" #, c-format, boost-format msgid "" @@ -14717,71 +18141,74 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" -"Immettere valori validi:\n" -"Valore iniziale: >= %.1f\n" -"Valore finale: <= %.1f\n" -"Valore finale: > Valore iniziale\n" -"Passo valore: >= %.3f)" +"Įveskite tinkamas reikšmes:\n" +"Pradinė reikšmė: >= %.1f\n" +"Galutinė reikšmė: <= %.1f\n" +"Galutinė reikšmė: > Pradinė reikšmė\n" +"Reikšmės žingsnis: >= %.3f)" msgid "The name cannot be empty." -msgstr "Il nome non può essere vuoto." +msgstr "Pavadinimas negali būti tuščias." + +#, c-format, boost-format +msgid "The selected preset: %s was not found." +msgstr "Pasirinktas profilis: %s nerastas." + +msgid "The name cannot be the same as the system preset name." +msgstr "Pavadinimas negali sutapti su nustatytu sistemos pavadinimu." + +msgid "The name is the same as another existing preset name" +msgstr "Pavadinimas sutampa su kito nustatymo pavadinimu" + +msgid "create new preset failed." +msgstr "sukurti naują profilį nepavyko." #, c-format, boost-format msgid "The selected preset: %s is not found." -msgstr "Il preset selezionato: %s non è stato trovato." - -msgid "The name cannot be the same as the system preset name." msgstr "" -"Il nome non può essere uguale al nome della preimpostazione di sistema." -msgid "The name is the same as another existing preset name" -msgstr "Il nome è lo stesso di un altro nome predefinito esistente" - -msgid "create new preset failed." -msgstr "La creazione di un nuovo preset è fallita." +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Sei sicuro di annullare la calibrazione corrente e tornare alla home page?" +"Ar tikrai norite atšaukti dabartinį kalibravimą ir grįžti į pagrindinį " +"puslapį?" msgid "No Printer Connected!" -msgstr "Nessuna stampante collegata!" +msgstr "Nėra prijungto spausdintuvo!" msgid "Printer is not connected yet." -msgstr "La stampante non è ancora connessa." +msgstr "Spausdintuvas dar neprijungtas." msgid "Please select filament to calibrate." -msgstr "Selezionare il filamento da calibrare." +msgstr "Pasirinkite giją, kurią norite kalibruoti." msgid "The input value size must be 3." -msgstr "La dimensione del valore di input deve essere 3." +msgstr "Įvesties reikšmės dydis turi būti 3." msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" +"Šio tipo mašinoje galima laikyti tik 16 istorijos rezultatų iš vieno " +"purkštuko. Galite ištrinti turimus ankstesnius rezultatus ir tada pradėti " +"kalibravimą. Arba galite tęsti kalibravimą, tačiau negalite sukurti naujų " +"kalibravimo istorijos rezultatų.\n" +"Ar vis dar norite tęsti kalibravimą?" -msgid "Connecting to printer..." -msgstr "Collegamento alla stampante..." - -msgid "The failed test result has been dropped." -msgstr "Il risultato del test non riuscito è stato eliminato." - -msgid "Flow Dynamics Calibration result has been saved to the printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" msgstr "" -"Il risultato della calibrazione di Flow Dynamics è stato salvato nella " -"stampante" #, c-format, boost-format msgid "" @@ -14789,36 +18216,48 @@ msgid "" "Only one of the results with the same name is saved. Are you sure you want " "to override the historical result?" msgstr "" -"C'è già un risultato di calibrazione precedente con lo stesso nome: %s. Ne " -"può essere salvato solo uno. Sei sicuro di voler sovrascrivere il risultato " -"precedente?" +"Jau yra ankstesnio kalibravimo rezultatas tokiu pačiu pavadinimu: %s. " +"Išsaugomas tik vienas iš to paties pavadinimo rezultatų. Ar tikrai norite " +"pakeisti ankstesnį rezultatą?" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." +"Šis įrenginio tipas gali talpinti tik %d istorijos rezultatų iš vieno " +"purkštuko. Šis rezultatas nebus išsaugotas." + +msgid "Connecting to printer..." +msgstr "Jungiamasi prie spausdintuvo..." + +msgid "The failed test result has been dropped." +msgstr "Nepavykusio testo rezultatas buvo panaikintas." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Srauto dinamikos kalibravimo rezultatas išsaugotas spausdintuve." msgid "Internal Error" -msgstr "Errore interno" +msgstr "Vidinė klaida" msgid "Please select at least one filament for calibration" -msgstr "Si prega di selezionare almeno un filamento per la calibrazione" +msgstr "Kalibravimui pasirinkite bent vieną giją" -msgid "Flow rate calibration result has been saved to preset" -msgstr "" -"Il risultato della calibrazione della portata è stato salvato nella " -"preimpostazione" +msgid "Flow rate calibration result has been saved to preset." +msgstr "Srauto kalibravimo rezultatas įrašytas į profilį." -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "" -"Il risultato della calibrazione della velocità volumetrica massima è stato " -"salvato in un valore preimpostato" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "Maksimalaus tūrio greičio kalibravimo rezultatas įrašytas į profilį." msgid "When do you need Flow Dynamics Calibration" -msgstr "Quando è necessaria la calibrazione della dinamica del flusso" +msgstr "Kada jums reikia srauto dinamikos kalibravimo" msgid "" "We now have added the auto-calibration for different filaments, which is " @@ -14826,22 +18265,20 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Ora abbiamo aggiunto la calibrazione automatica per diversi filamenti, che è " -"completamente automatizzata e il risultato verrà salvato nella stampante per " -"un uso futuro. È necessario eseguire la calibrazione solo nei seguenti casi " -"limitati:\n" -"1. Se si introduce un nuovo filamento di marche/modelli diversi o il " -"filamento è umido;\n" -"2. se l'ugello è usurato o sostituito con uno nuovo;\n" -"3. Se la velocità volumetrica massima o la temperatura di stampa vengono " -"modificate nell'impostazione del filamento." +"Dabar pridėjome automatinį kalibravimą skirtingoms gijoms, kuris yra " +"visiškai automatizuotas, o rezultatas bus išsaugotas spausdintuve ateities " +"naudojimui. Kalibravimą reikia atlikti tik šiais ribotais atvejais:\n" +"1. Jei naudojate naują skirtingos markės/modelio giją arba gija yra drėgna;\n" +"2. Jei purkštukas yra susidėvėjęs arba pakeistas nauju;\n" +"3. Jei gijos nustatymuose pakeistas maksimalus tūrinis greitis arba " +"spausdinimo temperatūra." msgid "About this calibration" -msgstr "Informazioni su questa calibrazione" +msgstr "Apie šį kalibravimą" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" @@ -14862,43 +18299,62 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"Išsamią informaciją apie srauto dinamikos kalibravimą rasite mūsų wiki.\n" +"\n" +"Paprastai kalibravimas nebūtinas. Kai pradedate spausdinti vienos spalvos / " +"medžiagos spaudinį, spausdinimo pradžios meniu pažymėjus parinktį \"Srauto " +"dinamikos kalibravimas\", spausdintuvas vadovausis senuoju būdu ir prieš " +"spausdinimą sukalibruos giją; kai pradedate spausdinti kelių spalvų / " +"medžiagos spaudinį, spausdintuvas kiekvieno gijos perjungimo metu naudos " +"numatytąjį gijos kompensavimo parametrą, kuris daugeliu atvejų duos gerą " +"rezultatą.\n" +"\n" +"Atkreipkite dėmesį, kad yra keletas atvejų, dėl kurių kalibravimo rezultatai " +"gali būti nepatikimi, pavyzdžiui, nepakankamas sukibimas su pagrindo " +"plokšte. Pagerinti sukibimą galima nuplaunant pagrindo plokštę arba užtepant " +"klijų. Daugiau informacijos šia tema rasite mūsų \"Wiki\".\n" +"\n" +"Mūsų bandyme kalibravimo rezultatai turi apie 10 proc. svyravimų, todėl " +"kiekvieno kalibravimo rezultatai gali būti ne visiškai vienodi. Mes vis dar " +"tiriame pagrindinę priežastį, kad galėtume atlikti patobulinimus su naujais " +"atnaujinimais." msgid "When to use Flow Rate Calibration" -msgstr "Quando utilizzare la calibrazione della portata" +msgstr "Kada naudoti srauto greičio kalibravimą" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"Dopo aver utilizzato la calibrazione di Flow Dynamics, potrebbero esserci " -"ancora alcuni problemi di estrusione, ad esempio:\n" -"1. Sovraestrusione: materiale in eccesso sull'oggetto stampato, formazione " -"di bolle o brufoli o strati che sembrano più spessi del previsto e non " -"uniformi.\n" -"2. Sottoestrusione: strati molto sottili, resistenza al riempimento debole o " -"spazi vuoti nello strato superiore del modello, anche quando si stampa " -"lentamente.\n" -"3. Scarsa qualità della superficie: la superficie delle stampe sembra ruvida " -"o irregolare.\n" -"4. Integrità strutturale debole: le stampe si rompono facilmente o non " -"sembrano robuste come dovrebbero essere." +"Panaudojus srauto dinamikos kalibravimą, vis dar gali kilti problemų dėl " +"ekstruzijos, pvz:\n" +"1. Per didelis išspaudimas: ant spausdinamo objekto atsiranda medžiagos " +"perteklius, susidaro dėmės ar taškeliai arba sluoksniai atrodo storesni nei " +"tikėtasi ir netolygūs.\n" +"2. Nepakankamas išspaudimas: Labai ploni sluoksniai, silpnas užpildo " +"stiprumas arba viršutiniame modelio sluoksnyje esantys tarpai, net kai " +"spausdinama lėtai.\n" +"3. Prasta paviršiaus kokybė: Spausdinių paviršius atrodo šiurkštus arba " +"nelygus.\n" +"4. Silpnas struktūrinis vientisumas: Spaudiniai lengvai lūžta arba neatrodo " +"tokie tvirti, kokie turėtų būti" msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" "PLA used in RC planes. These materials expand greatly when heated, and " "calibration provides a useful reference flow rate." msgstr "" -"Inoltre, la calibrazione della portata è fondamentale per i materiali " -"schiumogeni come l'LW-PLA utilizzato negli aerei RC. Questi materiali si " -"espandono notevolmente quando vengono riscaldati e la calibrazione fornisce " -"un'utile portata di riferimento." +"Be to, srauto greičio kalibravimas labai svarbus putojančioms medžiagoms, " +"pavyzdžiui, LW-PLA, naudojamoms RC lėktuvų gamyboje. Šios medžiagos labai " +"išsiplečia, kai yra kaitinamos, o kalibravimas suteikia naudingą etaloninį " +"srauto greitį." msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " @@ -14908,13 +18364,12 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"La calibrazione della portata misura il rapporto tra i volumi di estrusione " -"previsti e quelli effettivi. L'impostazione predefinita funziona bene nelle " -"stampanti Bambu Lab e nei filamenti ufficiali in quanto sono stati pre-" -"calibrati e messi a punto. Per un filamento normale, di solito non è " -"necessario eseguire una calibrazione della portata, a meno che non si vedano " -"ancora i difetti elencati dopo aver eseguito altre calibrazioni. Per " -"maggiori dettagli, consulta l'articolo wiki." +"Srauto greičio kalibravimas matuoja numatyto ir faktinio išspaudimo tūrio " +"santykį. Numatytasis nustatymas gerai veikia \"Bambu Lab\" spausdintuvuose " +"ir su oficialiomis gijomis, nes jos iš anksto sukalibruotos ir tiksliai " +"sureguliuotos. Įprastai naudojamoms gijoms paprastai nereikia atlikti srauto " +"greičio kalibravimo, nebent atlikus kitus kalibravimus vis dar matote " +"išvardytus defektus. Išsamesnės informacijos rasite wiki straipsnyje." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -14934,329 +18389,373 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"La calibrazione automatica della portata utilizza la tecnologia Micro-Lidar " -"di Bambu Lab, misurando direttamente i modelli di calibrazione. Tuttavia, si " -"prega di notare che l'efficacia e l'accuratezza di questo metodo possono " -"essere compromesse con tipi specifici di materiali. In particolare, i " -"filamenti trasparenti o semitrasparenti, con particelle scintillanti o con " -"una finitura altamente riflettente potrebbero non essere adatti a questa " -"calibrazione e possono produrre risultati tutt'altro che desiderabili.\n" +"Automatinis srauto greičio kalibravimas naudoja \"Bambu Lab\" mikrolidarų " +"technologiją, tiesiogiai matuojančią kalibravimo modelius. Tačiau " +"atkreipkite dėmesį, kad šio metodo veiksmingumas ir tikslumas gali sumažėti " +"naudojant tam tikrų tipų medžiagas. Ypač skaidrios ar pusiau skaidrios, " +"blizgančios arba turinčios labai atspindinčią apdailą gijos gali būti " +"netinkamos šiam kalibravimui ir gali duoti prastesnius nei pageidaujami " +"rezultatus.\n" "\n" -"I risultati della calibrazione possono variare a seconda della calibrazione " -"o del filamento. Stiamo ancora migliorando l'accuratezza e la compatibilità " -"di questa calibrazione attraverso aggiornamenti del firmware nel tempo.\n" +"Kalibravimo rezultatai gali skirtis priklausomai nuo kalibravimo ar gijų. " +"Vykdydami programinės aparatinės įrangos atnaujinimus laikui bėgant vis dar " +"tobuliname šio kalibravimo tikslumą ir suderinamumą.\n" "\n" -"Attenzione: La taratura della portata è un processo avanzato, che può essere " -"tentato solo da coloro che ne comprendono appieno lo scopo e le " -"implicazioni. Un uso errato può causare stampe scadenti o danni alla " -"stampante. Assicurati di leggere attentamente e comprendere il processo " -"prima di farlo." +"Įspėjimas: Srauto greičio kalibravimas yra sudėtingas procesas, kurį gali " +"atlikti tik tie, kurie visiškai supranta jo paskirtį ir pasekmes. " +"Neteisingas naudojimas gali lemti nekokybiškus spaudinius arba spausdintuvo " +"sugadinimą. Prieš atlikdami šį procesą būtinai atidžiai susipažinkite ir " +"supraskite jo eigą." msgid "When you need Max Volumetric Speed Calibration" -msgstr "Quando è necessaria la calibrazione della velocità volumetrica massima" +msgstr "Kada reikia maksimalaus tūrio greičio kalibravimo" msgid "Over-extrusion or under extrusion" -msgstr "Sovraestrusione o sottoestrusione" +msgstr "Per didelis arba per mažas išspaudimas" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "" -"La calibrazione della velocità volumetrica massima è consigliata quando si " -"stampa con:" +"Maksimalaus tūrio greičio kalibravimas rekomenduojamas, kai spausdinate su:" msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "materiale con notevole ritiro/dilatazione termica, come..." +msgstr "medžiaga, kuri smarkiai susitraukia ir (arba) plečiasi, pvz.,..." msgid "materials with inaccurate filament diameter" -msgstr "materiali con diametro del filamento impreciso" +msgstr "medžiagos su netiksliu gijų skersmeniu" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "" -"Abbiamo trovato il miglior fattore di calibrazione della dinamica del flusso" +msgstr "Radome geriausią srauto dinamikos kalibravimo koeficientą" msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." msgstr "" -"Parte della calibrazione non è riuscita! È possibile pulire la piastra e " -"riprovare. Il risultato del test non riuscito verrebbe eliminato." +"Dalis kalibravimo nepavyko! Galite nuvalyti pagrindą ir bandyti dar kartą. " +"Nepavykusio bandymo rezultatas bus panaikintas." msgid "" "*We recommend you to add brand, materia, type, and even humidity level in " "the Name" msgstr "" -"*Ti consigliamo di aggiungere marca, materia, tipo e persino livello di " -"umidità nel Nome" - -msgid "Failed" -msgstr "Fallito" +"*Į pavadinimą rekomenduojame įrašyti prekės ženklą, medžiagą, tipą ir net " +"drėgmės lygį" msgid "Please enter the name you want to save to printer." -msgstr "Immettere il nome che si desidera salvare nella stampante." +msgstr "Įveskite pavadinimą, kurį norite įrašyti į spausdintuvą." msgid "The name cannot exceed 40 characters." -msgstr "Il nome non può superare i 40 caratteri." - -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Verrà salvato solo uno dei risultati con lo stesso nome. Sei sicuro di voler " -"sostituire gli altri risultati?" +msgstr "Pavadinimas negali būti ilgesnis nei 40 simbolių." msgid "Please find the best line on your plate" -msgstr "Trova la linea migliore nel tuo piatto" +msgstr "Raskite geriausią liniją ant pagrindo" msgid "Please find the corner with perfect degree of extrusion" -msgstr "Prego Individua l'angolo con il grado di estrusione ideale" +msgstr "Raskite kampą su tobulu išspaudimo laipsniu" msgid "Input Value" -msgstr "Valore di input" +msgstr "Įvesties reikšmė" msgid "Save to Filament Preset" -msgstr "Salva nel preset del filamento" - -msgid "Preset" -msgstr "Preselezionato" +msgstr "Išsaugiti gijos profilyje" msgid "Record Factor" -msgstr "Fattore record" +msgstr "Įrašo veiksnys" msgid "We found the best flow ratio for you" -msgstr "Abbiamo trovato il miglior rapporto di flusso per te" +msgstr "Radome jums geriausią srauto santykį" msgid "Flow Ratio" -msgstr "Rapporto di flusso" +msgstr "Srautas" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "Immettere un valore valido (rapporto di flusso 0,0 < < 2,0)" +msgstr "Įveskite galiojančią reikšmę (0,0 < srauto santykis < 2,0)" msgid "Please enter the name of the preset you want to save." -msgstr "Immettere il nome del preset che si desidera salvare." +msgstr "Įveskite norimo išsaugoti profilio pavadinimą." msgid "Calibration1" -msgstr "Calibrazione1" +msgstr "Kalibravimas1" msgid "Calibration2" -msgstr "Calibrazione2" +msgstr "Kalibravimas2" msgid "Please find the best object on your plate" -msgstr "Trova l'oggetto migliore nel tuo piatto" +msgstr "Raskite geriausią objektą ant pagrindo" msgid "Fill in the value above the block with smoothest top surface" msgstr "" -"Riempi il valore sopra il blocco con la superficie superiore più liscia" +"Užpildykite reikšmę virš bloko, kurio viršutinis paviršius yra lygiausias" msgid "Skip Calibration2" -msgstr "Salta calibrazione2" +msgstr "Praleisti kalibravimą2" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "Rapporto di flusso : %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "Si prega di scegliere un blocco con la superficie superiore più liscia" +msgstr "srauto santykis : %s " msgid "Please choose a block with smoothest top surface." -msgstr "" -"Si prega di scegliere un blocco con la superficie superiore più liscia." +msgstr "Pasirinkite bloką, kurio viršutinis paviršius lygiausias." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "Inserire un valore valido (0 <= Velocità volumetrica massima <= 60)" +msgstr "Įveskite tinkamą reikšmę (0 <= Maksimalus tūrinis greitis <= 60)" msgid "Calibration Type" -msgstr "Tipo di calibrazione" +msgstr "Kalibravimo tipas" msgid "Complete Calibration" -msgstr "Calibrazione completa" +msgstr "Pilnas kalibravimas" msgid "Fine Calibration based on flow ratio" -msgstr "Calibrazione fine in base al rapporto di flusso" +msgstr "Tikslusis kalibravimas pagal srauto santykį" msgid "Title" -msgstr "Titolo" +msgstr "Pavadinimas" msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"Verrà stampato un modello di prova. Si prega di pulire il piatto di stampa e " -"riposizionarlo sul piano riscaldato prima della calibrazione." +"Bus atspausdintas bandomasis modelis. Prieš kalibruodami nuvalykite pagrindą " +"ir padėkite ją atgal į kaitinimo vietą." msgid "Printing Parameters" -msgstr "Parametri di stampa" +msgstr "Spausdinimo parametrai" + +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" msgid "Plate Type" -msgstr "Tipo di piatto" +msgstr "Plokštės tipas" msgid "filament position" -msgstr "Posizione del filamento" - -msgid "External Spool" -msgstr "Bobina esterna" +msgstr "gijos padėtis" msgid "Filament For Calibration" -msgstr "Calibrazione per Filamento" +msgstr "Gija kalibravimui" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" -"Suggerimenti per la calibrazione dei materiali: \n" -"- Materiali che possono condividere la stessa temperatura del piano " -"riscaldato\n" -"- Diverse marche e famiglie di filamenti (Marca = Bambu, Famiglia = Basic, " -"Matte)" +"Patarimai dėl kalibravimo medžiagos: \n" +" - Medžiagos, kurios gali turėti tą pačią karšto pagrindo temperatūrą\n" +" - Skirtingas gijų prekės ženklas ir šeima (prekės ženklas = Bambu, šeima = " +"Basic, Matte)" msgid "Pattern" -msgstr "Trama" +msgstr "Raštas" msgid "Method" -msgstr "Metodo" +msgstr "Metodas" #, c-format, boost-format msgid "%s is not compatible with %s" -msgstr "%s non è compatibile con %s" +msgstr "%s nesuderinama su %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." +msgstr "TPU nepalaiko srauto dinamikos automatinio kalibravimo." + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Negalima spausdinti kelių skirtingos temperatūros gijų kartu. Priešingu " +"atveju, spausdinimo metu gali užsikimšti purkštukas arba sugesti ekstruderiai" + +msgid "Sync AMS and nozzle information" msgstr "" -"Il TPU non è supportato per la calibrazione automatica di Flow Dynamics." msgid "Connecting to printer" -msgstr "Collegamento alla stampante" +msgstr "Jungiamasi prie spausdintuvo" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" msgid "From k Value" -msgstr "Da k Valore" +msgstr "Nuo k reikšmės" msgid "To k Value" -msgstr "Al valore k" +msgstr "Iki k reikšmės" msgid "Step value" -msgstr "Valore del passaggio" +msgstr "Žingsnio dydis" msgid "The nozzle diameter has been synchronized from the printer Settings" -msgstr "" -"Il diametro del nozzle è stato sincronizzato dalle impostazioni della " -"stampante" +msgstr "Purkštuko skersmuo buvo sinchronizuotas su spausdintuvo nustatymais" msgid "From Volumetric Speed" -msgstr "Dalla velocità volumetrica" +msgstr "Nuo tūrinio greičio" msgid "To Volumetric Speed" -msgstr "Velocità volumetrica" +msgstr "Iki tūrinio greičio" + +msgid "Are you sure you want to cancel this print?" +msgstr "Ar tikrai norite sustabdyti šį spausdinimą?" msgid "Flow Dynamics Calibration Result" -msgstr "Risultato della calibrazione della dinamica del flusso" +msgstr "Srauto dinamikos kalibravimo rezultatai" msgid "New" -msgstr "New" +msgstr "Naujas" msgid "No History Result" -msgstr "Nessun risultato della cronologia" +msgstr "Nėra ankstesnių rezultatų" msgid "Success to get history result" -msgstr "Successo per ottenere il risultato della cronologia" +msgstr "Sėkmingai gauti senesnį rezultatą" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "Aggiornamento dei record storici di calibrazione di Flow Dynamics" +msgstr "Senesnių srauto dinamikos kalibravimo įrašų atnaujinimas" msgid "Action" -msgstr "Azione" +msgstr "Veiksmas" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" +"Šis įrenginio tipas gali talpinti tik %d ankstesnių rezultatų iš vieno " +"purkštuko." msgid "Edit Flow Dynamics Calibration" -msgstr "Modifica calibrazione dinamica flusso (Edit Flow Dynamics)" +msgstr "Redaguoti srauto dinamikos kalibravimą" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "Naujas srauto dinaminis kalibravimas" msgid "Ok" -msgstr "Ok" +msgstr "Gerai" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "Turi būti pasirinkta gija." + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" -msgstr "Ricerca network" +msgstr "Tinklo paieška" msgid "Address" -msgstr "Indirizzo" +msgstr "Adresas" msgid "Hostname" -msgstr "Nome Host" +msgstr "Hosto pavadinimas" msgid "Service name" -msgstr "Nome servizio" +msgstr "Paslaugos pavadinimas" msgid "OctoPrint version" -msgstr "Versione OctoPrint" +msgstr "OctoPrint versija" msgid "Searching for devices" -msgstr "Ricerca dispositivi" +msgstr "Ieškoma įrenginių" msgid "Finished" -msgstr "Finito" +msgstr "Baigta" msgid "Multiple resolved IP addresses" -msgstr "Indirizzi IP multipli risolti" +msgstr "Keletas atrastų IP adresų" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" -"Esistono diversi indirizzi IP che risolvono il nome host %1%.\n" -"Selezionare quello da utilizzare." +"Yra keli IP adresai, kuriais galima nustatyti prievado vardą %1%.\n" +" Pasirinkite vieną, kuris turėtų būti naudojamas." msgid "PA Calibration" -msgstr "Calibrazione PA" - -msgid "DDE" -msgstr "Estrusore Diretto" - -msgid "Bowden" -msgstr "Bowden" +msgstr "PA kalibravimas" msgid "Extruder type" -msgstr "Tipo di estrusore" +msgstr "Ekstruderio tipas" + +msgid "DDE" +msgstr "DDE" msgid "PA Tower" -msgstr "Torre PA" +msgstr "PA bokštas" msgid "PA Line" -msgstr "Linea PA" +msgstr "PA linija" msgid "PA Pattern" -msgstr "Modello PA" +msgstr "PA raštas" msgid "Start PA: " -msgstr "Avvia PA: " +msgstr "Pradėti PA: " msgid "End PA: " -msgstr "Fine PA: " +msgstr "Baigti PA: " msgid "PA step: " -msgstr "Incremento PA: " +msgstr "PA žingsnis: " + +msgid "Accelerations: " +msgstr "Pagreičiai: " + +msgid "Speeds: " +msgstr "Greičiai: " msgid "Print numbers" -msgstr "Stampa numeri" +msgstr "Spausdinti numerius" + +msgid "Comma-separated list of printing accelerations" +msgstr "Kableliais atskirtas spausdinimo pagreičių sąrašas" + +msgid "Comma-separated list of printing speeds" +msgstr "Kableliais atskirtas spausdinimo greičių sąrašas" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" -"Immettere valori validi:\n" -"Avvia PA: >= 0.0\n" -"Fine PA: > Avvia PA\n" -"Passo PA: >= 0,001)" +"Įveskite galiojančias reikšmes:\n" +"Pradžios PA: >= 0,0\n" +"Pabaigos PA: > Pradžios PA\n" +"PA žingsnis: >= 0.001)" msgid "Temperature calibration" -msgstr "Calibrazione della temperatura" +msgstr "Temperatūros kalibravimas" + +msgid "Filament type" +msgstr "Gijos tipas" msgid "PLA" msgstr "PLA" @@ -15268,10 +18767,10 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" -msgstr "TPU (TPU)" +msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" @@ -15279,452 +18778,580 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Tipo filamento" - msgid "Start temp: " -msgstr "Temperatura Iniziale: " +msgstr "Pradžios temp: " msgid "End temp: " -msgstr "Temperatura finale: " +msgstr "Galutinė temp: " msgid "Temp step: " -msgstr "Incremento di temperatura: " +msgstr "Temp žingsnis: " + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Immettere valori validi:\n" -"Temperatura iniziale: <= 350\n" -"Temperatura finale: >= 170\n" -"Temperatura di inizio > Temperatura di fine + 5)" msgid "Max volumetric speed test" -msgstr "Test di velocità volumetrica massima" +msgstr "Didžiausio tūrio greičio bandymas" msgid "Start volumetric speed: " -msgstr "Velocità volumetrica iniziale: " +msgstr "Pradinis tūrinis greitis: " msgid "End volumetric speed: " -msgstr "Velocità volumetrica finale: " +msgstr "Galinis tūrinis greitis: " -msgid "step: " -msgstr "Incrementi: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" -"Immettere valori validi:\n" -"inizio > 0 \n" -"passo >= 0\n" -"fine > inizio + passo)" +"Įveskite tinkamas reikšmes:\n" +"pradinis > 0\n" +"žingsnis >= 0\n" +"galinis > pradinis + žingsnis)" msgid "VFA test" -msgstr "Prova VFA" +msgstr "VFA testas" msgid "Start speed: " -msgstr "Velocità di avvio: " +msgstr "Pradinis greitis: " msgid "End speed: " -msgstr "Velocità finale: " +msgstr "Galinis greitis: " + +msgid "Wiki Guide: VFA" +msgstr "" msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" -"Immettere valori validi:\n" -"Inizio > 10 \n" -"passo >= 0\n" -"fine > inizio + passo)" +"Įveskite tinkamas reikšmes:\n" +"pradinis > 10\n" +"žingsnis >= 0\n" +"galinis > pradinis + žingsnis)" msgid "Start retraction length: " -msgstr "Lunghezza di retrazione iniziale: " +msgstr "Pradinis įtraukimo ilgis: " msgid "End retraction length: " -msgstr "Lunghezza di retrazione finale: " +msgstr "Galinis įtraukimo ilgis: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" -msgstr "Invia G-code all’host stampante" +msgid "Input shaping Frequency test" +msgstr "Įvesties formavimo dažnio testas" -msgid "Upload to Printer Host with the following filename:" -msgstr "Carica all'Host di stampa con il seguente nome file:" +msgid "Test model" +msgstr "Bandomasis modelis" -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Usa la barra ( / ) come separatore di cartella se necessario." +msgid "Ringing Tower" +msgstr "Bangavimo bokštas" -msgid "Upload to storage" -msgstr "Carica nello spazio di archiviazione" +msgid "Fast Tower" +msgstr "Greitasis bokštas" -msgid "Switch to Device tab after upload." +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "Pradžia / Pabaiga" + +msgid "Frequency settings" +msgstr "Dažnio nustatymai" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "Slopinimas: " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Įveskite tinkamas reikšmes:\n" +"(0 < FreqStart < FreqEnd < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" +"Įveskite tinkamą slopinimo koeficientą (0 < slopinimas/zeta koeficientas <= " +"1)" + +msgid "Input shaping Damp test" +msgstr "Įvesties formavimas slopinimo bandymas" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "Dažnis" + +msgid "Damp" +msgstr "Slopinimas" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "Pastaba: Naudokite anksčiau apskaičiuotus dažnius." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Įveskite tinkamas reikšmes:\n" +"(0 < Freq < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Įveskite galiojantį slopinimo koeficientą (0 <= Slopinimo pradžia < " +"Slopinimo pabaiga <= 1)" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" msgstr "" +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" +msgstr "Siųsti G-kodą tinkliniam spausdintuvui" + +msgid "Upload to Printer Host with the following filename:" +msgstr "Įkelti į tinklinį spausdintuvą tokiu failo pavadinimu:" + +msgid "Use forward slashes ( / ) as a directory separator if needed." +msgstr "" +"Jei reikia, naudoti pasviruosius brūkšnius ( / ) kaip katalogų skyriklį." + +msgid "Upload to storage" +msgstr "Įkelti į saugyklą" + +msgid "Switch to Device tab after upload." +msgstr "Po įkėlimo pereikite į skirtuką Įrenginys." + #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "Il nome del file caricato non finisce con \"%s\". Vuoi continuare?" +msgstr "Įkėlimo failo pavadinimas nesibaigia „%s“. Ar norite tęsti?" msgid "Upload" -msgstr "Carica" +msgstr "Įkelti" msgid "Print host upload queue" -msgstr "Coda di caricamento Host di stampa" +msgstr "Įkėlimo spausdinimui tinkle eilė" msgid "ID" msgstr "ID" msgid "Progress" -msgstr "Progresso" +msgstr "Progresas" msgid "Host" -msgstr "Host" +msgstr "Hostas" msgctxt "OfFile" msgid "Size" -msgstr "Dimensione" +msgstr "Dydis" msgid "Filename" -msgstr "Nome file" +msgstr "Failo pavadinimas" msgid "Cancel selected" -msgstr "Cancella selezione" +msgstr "Atšaukti pasirinktą" msgid "Show error message" -msgstr "Mostra messaggio d'errore" +msgstr "Rodyti klaidos pranešimą" -msgid "Enqueued" -msgstr "Messo in coda" +msgid "Queued" +msgstr "Eilėje" msgid "Uploading" -msgstr "Caricamento" +msgstr "Įkeliama" -msgid "Cancelling" -msgstr "Annullamento" +msgid "Canceling" +msgstr "Atšaukiama" msgid "Error uploading to print host" -msgstr "Errore durante il caricamento dell'host di stampa" - -msgid "Unable to perform boolean operation on selected parts" -msgstr "Impossibile eseguire un'operazione booleana sulle parti selezionate" - -msgid "Mesh Boolean" -msgstr "Mesh booleano" - -msgid "Union" -msgstr "Unione" - -msgid "Difference" -msgstr "Differenza" - -msgid "Intersection" -msgstr "Intersezione" - -msgid "Source Volume" -msgstr "Volume sorgente" - -msgid "Tool Volume" -msgstr "Volume dell'utensile" - -msgid "Subtract from" -msgstr "Sottrai da" - -msgid "Subtract with" -msgstr "Sottrai" - -msgid "selected" -msgstr "selezionato" - -msgid "Part 1" -msgstr "Partita #1" - -msgid "Part 2" -msgstr "Partita #2" - -msgid "Delete input" -msgstr "Eliminare l'input" - -msgid "Network Test" -msgstr "网络测试" - -msgid "Start Test Multi-Thread" -msgstr "Avvia test multi-thread" - -msgid "Start Test Single-Thread" -msgstr "Avvia test a thread singolo" - -msgid "Export Log" -msgstr "Esporta Log" - -msgid "Snapmaker Orca Version:" -msgstr "" - -msgid "System Version:" -msgstr "Versione del sistema:" - -msgid "DNS Server:" -msgstr "Server DNS:" - -msgid "Test Snapmaker Orca(GitHub)" -msgstr "" - -msgid "Test Snapmaker Orca(GitHub):" -msgstr "" - -msgid "Test Bing.com" -msgstr "Test Bing.com" - -msgid "Test bing.com:" -msgstr "Test bing.com:" - -msgid "Log Info" -msgstr "Informazioni sul registro" - -msgid "Select filament preset" -msgstr "Seleziona il preset del filamento" - -msgid "Create Filament" -msgstr "Crea filamento" - -msgid "Create Based on Current Filament" -msgstr "Crea in base al filamento corrente" - -msgid "Copy Current Filament Preset " -msgstr "Copia il preset del filamento corrente " - -msgid "Basic Information" -msgstr "Informazioni di base" - -msgid "Add Filament Preset under this filament" -msgstr "Aggiungi il preset del filamento sotto questo filamento" - -msgid "We could create the filament presets for your following printer:" -msgstr "Potremmo creare i preset di filamento per la tua seguente stampante:" - -msgid "Select Vendor" -msgstr "Selezionare Fornitore" - -msgid "Input Custom Vendor" -msgstr "Inserisci fornitore personalizzato" - -msgid "Can't find vendor I want" -msgstr "Non riesco a trovare il fornitore che voglio" - -msgid "Select Type" -msgstr "Selezionare il Tipo" - -msgid "Select Filament Preset" -msgstr "Seleziona il preset del filamento" - -msgid "Serial" -msgstr "Seriale" - -msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "ad es. Base, Opaco, Seta, Marmo" - -msgid "Filament Preset" -msgstr "Preset di filamento" - -msgid "Create" -msgstr "Crea" - -msgid "Vendor is not selected, please reselect vendor." -msgstr "Il fornitore non è selezionato, riseleziona il fornitore." - -msgid "Custom vendor is not input, please input custom vendor." -msgstr "" -"Il fornitore personalizzato non viene inserito, si prega di inserire il " -"fornitore personalizzato." +msgstr "Klaida siunčiant į spausdintuvą" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"The selected bed type does not match the file. Please confirm before " +"starting the print." msgstr "" -"\"Bambu\" o \"Generico\" non possono essere utilizzati come Fornitore per " -"filamenti personalizzati." +"Pasirinktas pagrindo tipas neatitinka failo. Prieš pradėdami spausdinti, " +"patvirtinkite." + +msgid "Time-lapse" +msgstr "Laiko intervalai" + +msgid "Heated Bed Leveling" +msgstr "Šildomo pagrindo išlyginimas" + +msgid "Textured Build Plate (Side A)" +msgstr "Tekstūruota pagrindo plokštė (A pusė)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Lygi pagrindo plokštė (B pusė)" + +msgid "Unable to perform boolean operation on selected parts" +msgstr "Nepavyksta atlikti loginės operacijos su pasirinktomis dalimis" + +msgid "Mesh Boolean" +msgstr "Objektų jungimo / atėmimo / susikirtimo įrankiai" + +msgid "Union" +msgstr "Sąjunga" + +msgid "Difference" +msgstr "Skirtumas" + +msgid "Intersection" +msgstr "Susikirtimas" + +msgid "Source Volume" +msgstr "Išteklių tūris" + +msgid "Tool Volume" +msgstr "Įrankių tūris" + +msgid "Subtract from" +msgstr "Atimti iš" + +msgid "Subtract with" +msgstr "Atimti su" + +msgid "selected" +msgstr "pasirinkta" + +msgid "Part 1" +msgstr "1 dalis" + +msgid "Part 2" +msgstr "2 dalis" + +msgid "Delete input" +msgstr "Ištrinti įvestį" + +msgid "Network Test" +msgstr "Tinklo testas" + +msgid "Start Test Multi-Thread" +msgstr "Pradėti bandymą su keliais srautais" + +msgid "Start Test Single-Thread" +msgstr "Pradėti bandymą vienu srautu" + +msgid "Export Log" +msgstr "Eksportuoti žurnalą" + +msgid "Snapmaker Orca Version:" +msgstr "\"Snapmaker Orca\" versija:" + +msgid "System Version:" +msgstr "Sistemos versija:" + +msgid "DNS Server:" +msgstr "DNS serveris:" + +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Išbandyti Snapmaker Orca(GitHub)" + +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Išbandyti Snapmaker Orca(GitHub):" + +msgid "Test bing.com" +msgstr "Išbandyti Bing.com" + +msgid "Test bing.com:" +msgstr "Išbandyti Bing.com:" + +msgid "Log Info" +msgstr "Žurnalo informacija" + +msgid "Select filament preset" +msgstr "Pasirinkite gijos išankstinį nustatymą" + +msgid "Create Filament" +msgstr "Sukurti giją" + +msgid "Create Based on Current Filament" +msgstr "Sukurti pagal dabartinę giją" + +msgid "Copy Current Filament Preset " +msgstr "Nukopijuoti dabartinės gijos išankstinę nuostatą " + +msgid "Basic Information" +msgstr "Pagrindinė informacija" + +msgid "Add Filament Preset under this filament" +msgstr "Pridėti gijos nustatymą pagal šią giją" + +msgid "We could create the filament presets for your following printer:" +msgstr "Galime sukurti jūsų spausdintuvui skirtus gijų nustatymus:" + +msgid "Select Vendor" +msgstr "Pasirinkite pardavėją" + +msgid "Input Custom Vendor" +msgstr "Pasirinktinio pardavėjo įvedimas" + +msgid "Can't find vendor I want" +msgstr "Negaliu rasti norimo pardavėjo" + +msgid "Select Type" +msgstr "Pasirinkite tipą" + +msgid "Select Filament Preset" +msgstr "Pasirinkite išankstinį gijų nustatymą" + +msgid "Serial" +msgstr "Serijinis" + +msgid "e.g. Basic, Matte, Silk, Marble" +msgstr "pvz., pagrindinis, matinis, šilkinis, marmurinis" + +msgid "Filament Preset" +msgstr "Gijos išankstinis nustatymas" + +msgid "Create" +msgstr "Sukurti" + +msgid "Vendor is not selected, please reselect vendor." +msgstr "Pardavėjas nepasirinktas, pasirinkite pardavėją iš naujo." + +msgid "Custom vendor is not input, please input custom vendor." +msgstr "Pasirinktinis pardavėjas neįvestas, įveskite pasirinktinį pardavėją." + +msgid "" +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." +msgstr "" +"\"Bambu\" arba \"Generic\" negalima naudoti kaip pasirinktinių gijų " +"pardavėjo." msgid "Filament type is not selected, please reselect type." -msgstr "Il tipo di filamento non è selezionato, riselezionare il tipo." +msgstr "Nepasirinktas gijos tipas, pasirinkite tipą iš naujo." -msgid "Filament serial is not inputed, please input serial." -msgstr "Il seriale del filamento non è inserito, inserire il seriale." +msgid "Filament serial is not entered, please enter serial." +msgstr "Gijos serijinis numeris neįvestas, įveskite serijinį numerį." msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." msgstr "" -"Potrebbero essere presenti caratteri da evitare nel fornitore o nell'input " -"seriale del filamento. Si prega di eliminare e inserire nuovamente." +"Gijų pardavėjo arba serijos numerio įvesties laukelyje gali būti " +"praleidžiamųjų simbolių. Ištrinkite ir įveskite iš naujo." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -"Tutti gli input nel fornitore personalizzato o nel numero di serie sono " -"spazi. Si prega di inserire di nuovo." +"Visi pasirinktinio pardavėjo ar serijos numerio įvesties duomenys yra " +"tarpai. Įveskite iš naujo." -msgid "The vendor can not be a number. Please re-enter." -msgstr "Il venditore non può essere un numero. Si prega di inserire di nuovo." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "Pardavėjas negali būti skaičius. Prašome įvesti iš naujo." msgid "" "You have not selected a printer or preset yet. Please select at least one." msgstr "" -"Non è stata ancora selezionata una stampante o un Preset. Si prega di " -"selezionarne almeno uno." +"Dar nepasirinkote spausdintuvo arba išankstinio nustatymo. Pasirinkite bent " +"vieną." #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Il nome del filamento %s che hai creato esiste già. \n" -"Se continui nella creazione, il preset creato verrà visualizzato con il suo " -"nome completo. Vuoi continuare?" +"Sukurtas gijos pavadinimas %s jau egzistuoja.\n" +"Jei toliau kursite, bus rodomas visas sukurto išankstinio nustatymo " +"pavadinimas. Ar norite tęsti?" msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "" -"Non è stato possibile creare alcuni preset esistenti, come indicato di " -"seguito:\n" +msgstr "Kai kurių esamų nustatymų nepavyko sukurti, pvz.:\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" -"Vuoi riscriverlo?" +"Ar norite jį perrašyti?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" -"Rinomineremo le preimpostazioni come \"Tipo di fornitore seriale @printer " -"selezionato\". \n" -"Per aggiungere il preset per più stampanti, vai alla selezione della " -"stampante" +"Būtų galima pervadinti iš anksto nustatytus nustatymus į \"Pardavėjo tipo " +"serijinis @printeris, kurį pasirinkote\".\n" +"Norėdami pridėti daugiau spausdintuvų, eikite į spausdintuvo pasirinkimą" msgid "Create Printer/Nozzle" -msgstr "Crea stampante/ugello" +msgstr "Sukurti spausdintuvą / purkštuką" msgid "Create Printer" -msgstr "Crea stampante" +msgstr "Sukurti spausdintuvą" msgid "Create Nozzle for Existing Printer" -msgstr "Creazione di un ugello per la stampante esistente" +msgstr "Sukurti esamo spausdintuvo purkštuką" msgid "Create from Template" -msgstr "Crea da modello" +msgstr "Sukurti pagal šabloną" msgid "Create Based on Current Printer" -msgstr "Crea in base alla stampante corrente" +msgstr "Kurti pagal esamą spausdintuvą" msgid "Import Preset" -msgstr "Importa Preset" +msgstr "Importuoti nustatymus" msgid "Create Type" -msgstr "Crea tipo" +msgstr "Sukurti tipą" -msgid "The model is not found, place reselect vendor." -msgstr "" -"La modello non è stato trovato. Si prega di selezionare nuovamente il " -"fornitore." - -msgid "Select Model" -msgstr "Seleziona modello" +msgid "The model was not found, please reselect vendor." +msgstr "Modelis nerastas, iš naujo pasirinkite pardavėją." msgid "Select Printer" -msgstr "Seleziona Stampante" +msgstr "Pasirinkite spausdintuvą" + +msgid "Select Model" +msgstr "Pasirinkite modelį" msgid "Input Custom Model" -msgstr "Inserisci modello personalizzato" +msgstr "Įvesti pasirinktinį modelį" msgid "Can't find my printer model" -msgstr "Non riesco a trovare il modello della mia stampante" +msgstr "Negaliu rasti savo spausdintuvo modelio" + +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" msgid "Rectangle" -msgstr "Rettangolo" +msgstr "Stačiakampis" msgid "Printable Space" -msgstr "Spazio di stampa" +msgstr "Spausdintina erdvė" msgid "Hot Bed STL" -msgstr "STL del Piano Riscaldato" - -msgid "Load stl" -msgstr "Carica stl" +msgstr "Šildomas pagrindas STL" msgid "Hot Bed SVG" -msgstr "SVG del Piano Riscaldato" - -msgid "Load svg" -msgstr "Carica svg" +msgstr "Šildomas pagrindas SVG" msgid "Max Print Height" -msgstr "Altezza massima di stampa" +msgstr "Maksimalus spausdinimo aukštis" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." -msgstr "Il file supera i %d MB, si prega di importarlo di nuovo." +msgstr "Failas viršija %d MB, importuokite dar kartą." msgid "Exception in obtaining file size, please import again." -msgstr "" -"Eccezione nell'ottenere la dimensione del file, si prega di importare di " -"nuovo." +msgstr "Išimtis gaunant failo dydį, importuokite dar kartą." -msgid "Preset path is not find, please reselect vendor." -msgstr "" -"Il percorso preimpostato non viene trovato, riselezionare il fornitore." +msgid "Preset path was not found, please reselect vendor." +msgstr "Nerastas nustatymų kelias, iš naujo pasirinkite pardavėją." msgid "The printer model was not found, please reselect." -msgstr "Il modello della stampante non è stato trovato, riselezionare." +msgstr "Spausdintuvo modelis nerastas, pasirinkite iš naujo." -msgid "The nozzle diameter is not found, place reselect." -msgstr "Il diametro del nozzle non trovato, riselezionare." +msgid "The nozzle diameter was not found, please reselect." +msgstr "Purkštuko skersmuo nerastas, pasirinkite iš naujo." -msgid "The printer preset is not found, place reselect." -msgstr "" -"La configurazione predefinita della stampante non è stata trovata. Per " -"favore, seleziona nuovamente." +msgid "The printer preset was not found, please reselect." +msgstr "Spausdintuvo išankstinis nustatymas nerastas, pasirinkite iš naujo." msgid "Printer Preset" -msgstr "Preimpostazione stampante" +msgstr "Spausdintuvo nustatymai" msgid "Filament Preset Template" -msgstr "Modello di preset di filamento" +msgstr "Gijos nustatymų šablonas" msgid "Deselect All" -msgstr "Deseleziona tutto" +msgstr "Atšaukti visus" msgid "Process Preset Template" -msgstr "Modello di Impostazioni Predefinite del Processo" - -msgid "Back Page 1" -msgstr "Indietro Pagina 1" +msgstr "Proceso nustatymų šablonas" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Non avete ancora scelto l'impostazione predefinita della stampante in base " -"alla quale creare. Si prega di scegliere il fornitore e il modello della " -"stampante" +"Dar nepasirinkote, pagal kurį spausdintuvo išankstinį nustatymą kurti. " +"Pasirinkite spausdintuvo gamintoją ir modelį" msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." msgstr "" -"Hai inserito un input non valido nella sezione dell'area stampabile nella " -"prima pagina. Controlla prima di crearlo." - -msgid "The custom printer or model is not inputed, place input." -msgstr "" -"La stampante o il modello personalizzato non viene immesso, inserire l'input." +"Pirmojo puslapio spausdintinos srities skiltyje įvedėte neleistiną reikšmę. " +"Prieš jį kurdami patikrinkite." msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -15735,77 +19362,86 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" -"La configurazione predefinita della stampante che hai creato ha già una " -"configurazione predefinita con lo stesso nome. Vuoi sovrascriverla?\n" -"\tSì: Sovrascrivi la configurazione predefinita della stampante con lo " -"stesso nome, e le configurazioni predefinite del filamento e del processo " -"con lo stesso nome saranno ricreate,\n" -" mentre quelle senza lo stesso nome saranno conservate.\n" -" \tAnnulla: Non creare una configurazione predefinita, torna all'interfaccia " -"di creazione." +"Jūsų sukurtame spausdintuvo išankstiniame nustatyme jau yra to paties " +"pavadinimo išankstinis nustatymas. Ar norite jį perrašyti\n" +"\tTaip: perrašyti spausdintuvo nustatymus su tuo pačiu pavadinimu, ir " +"atkurti gijų ir procesų nustatymus su tais pačiais nustatymų \n" +"pavadinimais, o gijų ir procesų nustatymai be to paties pavadinimo bus " +"rezervuoti.\n" +"\tAtšaukti: Nesukurti išankstinio nustatymo, grįžti į kūrimo sąsają." msgid "You need to select at least one filament preset." -msgstr "È necessario selezionare almeno un preset filamento." +msgstr "Reikia pasirinkti bent vieną gijų nustatymą." msgid "You need to select at least one process preset." -msgstr "È necessario selezionare almeno un preset di processo." +msgstr "Reikia pasirinkti bent vieną proceso nustatymą." msgid "Create filament presets failed. As follows:\n" -msgstr "La creazione dei preset di filamento non è riuscita. Come segue:\n" +msgstr "Nepavyko sukurti gijų nustatymų. Taip:\n" msgid "Create process presets failed. As follows:\n" -msgstr "La creazione dei predefiniti di processo non è riuscita. Come segue:\n" +msgstr "" +"Nepavyko sukurti proceso nustatymų. Taip:\n" +"\n" -msgid "Vendor is not find, please reselect." -msgstr "Il fornitore non è stato trovato, si prega di riselezionare." +msgid "Vendor was not found, please reselect." +msgstr "Pardavėjas nerastas, pasirinkite iš naujo." msgid "Current vendor has no models, please reselect." -msgstr "Il fornitore attuale non ha modelli, si prega di riselezionare." +msgstr "Dabartinis pardavėjas neturi modelių, pasirinkite iš naujo." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"Non sono stati selezionati il fornitore e il modello o non sono stati " -"immessi il fornitore e il modello personalizzati." +"Nepasirinkote pardavėjo ir modelio arba neįvedėte pasirinktinio pardavėjo ir " +"modelio." msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." msgstr "" -"Potrebbero essere presenti caratteri da evitare nel fornitore o nel modello " -"di stampante personalizzata. Si prega di eliminare e inserire nuovamente." +"Pasirinktiniame spausdintuvo pardavėjo arba modelio pavadinime gali būti " +"praleidžiamų simbolių. Ištrinkite ir įveskite iš naujo." msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"Tutti gli input nel fornitore o nel modello di stampante personalizzata sono " -"spazi. Si prega di inserire di nuovo." +"Visi pasirinktinio spausdintuvo tiekėjo arba modelio įvesties duomenys yra " +"tarpai. Įveskite iš naujo." msgid "Please check bed printable shape and origin input." -msgstr "" -"Si prega di controllare la forma stampabile del letto e l'input dell'origine." +msgstr "Patikrinkite pagrindo spausdinimo formą ir pradžią." msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -"Non hai ancora selezionato la stampante per sostituire l'ugello, scegli." +"Dar nepasirinkote spausdintuvo, kuriuo norite pakeisti antgalį, pasirinkite." -msgid "Create Printer Successful" -msgstr "Creazione di una stampante riuscita" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" -msgid "Create Filament Successful" -msgstr "Crea un filamento di successo" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "Sėkmingai sukurtas spausdintuvas" + +msgid "Filament Created Successfully" +msgstr "Sėkmingai sukurta gija" msgid "Printer Created" -msgstr "Stampante creata" +msgstr "Sukurtas spausdintuvas" msgid "Please go to printer settings to edit your presets" msgstr "" -"Vai alle impostazioni della stampante per modificare le tue preimpostazioni" +"Eikite į spausdintuvo nustatymus, kad galėtumėte redaguoti išankstinius " +"nustatymus" msgid "Filament Created" -msgstr "Filamento creato" +msgstr "Sukurta gija" msgid "" "Please go to filament setting to edit your presets if you need.\n" @@ -15813,55 +19449,63 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Se necessario, vai alle impostazioni filamento per modificare i preset.\n" -"Tieni presente che la temperatura del nozzle, la temperatura del piano e la " -"massima velocità volumetrica hanno ciascuna un impatto significativo sulla " -"qualità di stampa. Impostali con attenzione." +"Jei reikia, eikite į gijos nustatymus ir redaguokite savo išankstinius " +"nustatymus.\n" +"Atkreipkite dėmesį, kad purkštuko temperatūra, karšto pagrindo temperatūra " +"ir didžiausias tūrinis greitis turi didelę įtaką spausdinimo kokybei. " +"Prašome atidžiai juos nustatyti." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" +"\n" +"\n" +"\"Orca\" nustatė, kad jūsų naudotojo nustatymų sinchronizavimo funkcija " +"neįjungta, todėl įrenginio puslapyje gali nepavykti nustatyti gijų " +"nustatymų.\n" +"Spustelėkite \" Sinchronizuoti naudotojo nustatymus\", kad įjungtumėte " +"sinchronizavimo funkciją." msgid "Printer Setting" -msgstr "Impostazione della stampante" +msgstr "Spausdintuvo nustatymai" msgid "Printer config bundle(.orca_printer)" -msgstr "Bundle di configurazione della stampante (.orca_printer)" +msgstr "Spausdintuvo konfigūracijos paketas(.orca_printer)" msgid "Filament bundle(.orca_filament)" -msgstr "Bundle filamenti (.orca_filament)" +msgstr "Gijų paketas(.orca_filament)" msgid "Printer presets(.zip)" -msgstr "Preimpostazioni della stampante (.zip)" +msgstr "Spausdintuvo nustatymai(.zip)" msgid "Filament presets(.zip)" -msgstr "Preimpostazioni del filamento (.zip)" +msgstr "Gijų nustatymai(.zip)" msgid "Process presets(.zip)" -msgstr "Preimpostazioni di processo (.zip)" +msgstr "Proceso nustatymai(.zip)" msgid "initialize fail" -msgstr "Inizializzazione non riuscita" +msgstr "inicializuoti nepavyksta" msgid "add file fail" -msgstr "L'aggiunta del file non è riuscita" +msgstr "pridėti failą nepavyksta" msgid "add bundle structure file fail" -msgstr "L'aggiunta del file della struttura del bundle non è riuscita" +msgstr "pridėti paketų struktūros failą nepavyksta" msgid "finalize fail" -msgstr "Finalizzazione non riuscita" +msgstr "baigti nepavyksta" msgid "open zip written fail" -msgstr "apri zip scritto non riuscito" +msgstr "atidaryti zip raštu nepavyksta" msgid "Export successful" -msgstr "Esportazione riuscita" +msgstr "Sėkmingai eksportuota" #, c-format, boost-format msgid "" @@ -15870,354 +19514,408 @@ msgid "" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" -"La cartella '%s' esiste già nella directory corrente. Vuoi cancellarla e " -"ricostruirla.\n" -"In caso contrario, verrà aggiunto un suffisso temporale e sarà possibile " -"modificare il nome dopo la creazione." +"Dabartiniame kataloge jau yra aplankas '%s'. Ar norite jį ištrinti ir " +"atkurti.\n" +"Jei ne, bus pridėta laiko priesaga, o pavadinimą galėsite keisti po sukūrimo." + +#, c-format, boost-format +msgid "" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" +"Failas: %s\n" +"gali būti atidarytas kitoje programoje.\n" +"Uždarykite jį ir bandykite dar kartą." msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"Stampante e tutte le preimpostazioni di filamento e processo che " -"appartengono alla stampante. \n" -"Può essere condiviso con altri." +"Spausdintuvo ir visų spausdintuvui priklausančių gijų ir procesų išankstinės " +"nuostatos.\n" +"Galima dalytis su kitais." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Set di preimpostazioni di riempimento dell'utente. \n" -"Può essere condiviso con altri." +"Vartotojo iš anksto nustatytas gijų rinkinys.\n" +"Galima bendrinti su kitais." msgid "" "Only display printer names with changes to printer, filament, and process " "presets." msgstr "" -"Mostrare solo i nomi delle stampanti con modifiche alle impostazioni " -"predefinite della stampante, del filamento e del processo." +"Spausdintuvų pavadinimai rodomi tik tada, kai pakeistos spausdintuvo, gijų " +"ir proceso išankstinės nuostatos." msgid "Only display the filament names with changes to filament presets." msgstr "" -"Mostrare solo i nomi dei filamenti con modifiche alle impostazioni " -"predefinite del filamento." +"Rodykite tik gijų pavadinimus su gijų išankstinių nustatymų pakeitimais." msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi delle stampanti con le preimpostazioni " -"della stampante dell'utente e ogni preimpostazione scelta verrà esportata " -"come zip." +"Bus rodomi tik spausdintuvų pavadinimai su naudotojo spausdintuvo " +"išankstiniais nustatymais, o kiekvienas pasirinktas išankstinis nustatymas " +"bus eksportuojamas kaip ZIP failas." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi dei filamenti con le preimpostazioni dei " -"filamenti dell'utente, \n" -"E tutte le preimpostazioni del filamento utente in ogni nome di filamento " -"selezionato verranno esportate come ZIP." +"Bus rodomi tik gijų pavadinimai su naudotojo gijų išankstinėmis " +"nuostatomis, \n" +"o visi naudotojo gijų išankstiniai nustatymai kiekviename pasirinktame gijos " +"pavadinime bus eksportuojami kaip zip." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" -"Verranno visualizzati solo i nomi delle stampanti con le impostazioni " -"predefinite del processo modificate,\n" -" e tutte le impostazioni predefinite del processo dell'utente in ogni nome " -"della stampante selezionato saranno esportate come un file zip." +"Bus rodomi tik spausdintuvų pavadinimai su pakeistomis proceso išankstinėmis " +"nuostatomis, \n" +"o visi naudotojo proceso nustatymai kiekviename pasirinktame spausdintuvo " +"pavadinime bus eksportuoti kaip zip." msgid "Please select at least one printer or filament." -msgstr "Seleziona almeno una stampante o un filamento." +msgstr "Pasirinkite bent vieną spausdintuvą arba giją." msgid "Please select a type you want to export" -msgstr "Seleziona il tipo che desideri esportare" +msgstr "Pasirinkite tipą, kurį norite eksportuoti" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" +"Nepavyko sukurti laikinojo aplanko, bandykite dar kartą eksportuoti " +"konfigūracijas." msgid "Edit Filament" -msgstr "Modifica filamento" +msgstr "Redaguoti giją" msgid "Filament presets under this filament" -msgstr "Filamento preimpostato sotto questo filamento" +msgstr "Gijos nustatymai pagal šią giją" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Nota: Se l'unico preset sotto questo filamento viene eliminato, il filamento " -"verrà cancellato dopo aver chiuso la finestra di dialogo." +"Pastaba: Jei ištrintas vienintelis šios gijos išankstinis nustatymas, gija " +"bus ištrinta išėjus iš dialogo lango." -msgid "Presets inherited by other presets can not be deleted" -msgstr "I preset ereditati da altri preset non possono essere eliminati" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" +"Iš anksto nustatytų nustatymų, kuriuos paveldėjo kiti iš anksto nustatyti " +"nustatymai, negalima ištrinti" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "I seguenti preset ereditano questo preset." -msgstr[1] "I seguenti preset ereditano questo preset." +msgstr[0] "Šį išankstinį nustatymą paveldi šis išankstinis nustatymas." +msgstr[1] "Šiuos išankstinius nustatymus paveldi šie išankstiniai nustatymai." +msgstr[2] "Šiuos išankstinius nustatymus paveldi šie išankstiniai nustatymai." msgid "Delete Preset" -msgstr "Elimina Predefinito" - -msgid "Are you sure to delete the selected preset?" -msgstr "Sei sicuro di voler eliminare il preset selezionato?" - -msgid "Delete preset" -msgstr "Cancella preset" - -msgid "+ Add Preset" -msgstr "+ Aggiungi preset" - -msgid "Delete Filament" -msgstr "Elimina filamento" +msgstr "Ištrinti nustatymą" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Ar tikrai norite ištrinti pasirinktą išankstinį nustatymą?\n" +"Jei išankstinis nustatymas atitinka šiuo metu spausdintuve naudojamą giją, " +"iš naujo nustatykite tos angos gijos informaciją." + +msgid "Are you sure to delete the selected preset?" +msgstr "Ar tikrai norite ištrinti pasirinktą nustatymą?" + +msgid "Delete preset" +msgstr "Ištrinti nustatymą" + +msgid "+ Add Preset" +msgstr "+ Pridėti nustatymą" + +msgid "" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Tutti i preset di filamento appartenenti a questo filamento verranno " -"eliminati. \n" -"Se stai utilizzando questo filamento sulla tua stampante, reimposta le " -"informazioni sul filamento per quello slot." +"Visi šiai gijai priklausantys išankstiniai nustatymai bus ištrinti.\n" +"Jei spausdintuve naudojate šią giją, iš naujo nustatykite tos angos gijos " +"informaciją." msgid "Delete filament" -msgstr "Elimina filamento" +msgstr "Ištrinti giją" msgid "Add Preset" -msgstr "Aggiungi preset" +msgstr "Pridėti nustatymą" msgid "Add preset for new printer" -msgstr "Aggiungi preimpostazione per la nuova stampante" +msgstr "Pridėti iš naujo spausdintuvo nustatymą" msgid "Copy preset from filament" -msgstr "Copia preset dal filamento" +msgstr "Nukopijuoti nustatymą iš gijos" msgid "The filament choice not find filament preset, please reselect it" msgstr "" -"La scelta del filamento non trova il preset del filamento, si prega di " -"riselezionarlo" +"Gijos pasirinkimas nerandamas iš anksto nustatytas, pasirinkite jį iš naujo" msgid "[Delete Required]" -msgstr "[Elimina obbligatorio]" +msgstr "[Reikia ištrinti]" msgid "Edit Preset" -msgstr "Modifica preset" +msgstr "Redaguoti nustatymą" msgid "For more information, please check out Wiki" -msgstr "Per ulteriori informazioni, consulta Wiki" +msgstr "Daugiau informacijos rasite Wiki" msgid "Collapse" -msgstr "Riduci" +msgstr "Sutraukti" msgid "Daily Tips" -msgstr "Consigli giornalieri" +msgstr "Dienos patarimai" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "nozzle memorizzato: %.1f %s" +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"Il diametro del nozzle preimpostato non è coerente con il diametro di quello " -"memorizzato. Hai cambiato l'ugello ultimamente?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*La stampa del materiale %s con %s può causare danni al nozzle." +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" -msgstr "Hai bisogno di selezionare la stampante" +msgstr "Reikia pasirinkti spausdintuvą" msgid "The start, end or step is not valid value." -msgstr "L'inizio, la fine o il passo non sono valori validi." +msgstr "Pradžios, pabaigos arba žingsnio reikšmė netinkama." + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" -"Impossibile calibrare: forse perché l'intervallo di valori di calibrazione " -"impostato è troppo ampio o il passo è troppo piccolo" +"Nepavyksta sukalibruoti: galbūt dėl to, kad nustatytas kalibravimo vertės " +"intervalas yra per didelis arba žingsnis yra per mažas" msgid "Physical Printer" -msgstr "Stampante Fisica" +msgstr "Fizinis spausdintuvas" msgid "Print Host upload" -msgstr "Caricamento Host di stampa" +msgstr "Įkėlimas spausdinimui tinkle" msgid "Could not get a valid Printer Host reference" -msgstr "Impossibile ottenere un riferimento Host Stampante valido" +msgstr "Nepavyko gauti galiojančios tinklinio spausdintuvo nuorodos" msgid "Success!" -msgstr "Successo!" +msgstr "Pavyko!" msgid "Are you sure to log out?" -msgstr "Sei sicuro di voler effettuare il logout?" - -msgid "Refresh Printers" -msgstr "Aggiorna Stampanti" +msgstr "Ar tikrai norite atsijungti?" msgid "View print host webui in Device tab" -msgstr "" +msgstr "Spausdintuvo sąsajos peržiūra skirtuke Įrenginys" msgid "Replace the BambuLab's device tab with print host webui" -msgstr "" +msgstr "Pakeiskite \"BambuLab\" įrenginio skirtuką spausdintuvo sąsaja" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"File HTTPS CA opzionale. È necessario solo se si intende usare un HTTPS con " -"certificato autofirmato." +"HTTPS CA failas yra neprivalomas. Jis reikalingas tik tuo atveju, jei " +"naudojate HTTPS su savarankiškai pasirašytu sertifikatu." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "File di certificato (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "Sertifikato failai (*.crt, *.pem)|*.crt;*.pem|Visi failai|*.*" msgid "Open CA certificate file" -msgstr "Apri file di certificato CA" +msgstr "Atidaryti CA sertifikato failą" #, c-format, boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"Su questo sistema, %s utilizza certificati HTTPS provenienti dal sistema " -"Certificate Store o da Keychain." +"Šioje sistemoje %s naudoja HTTPS sertifikatus iš sistemos Certificate Store " +"arba Keychain." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"Per utilizzare un file CA personalizzato, importa il tuo file CA sul " -"Certificate Store / Keychain." +"Norėdami naudoti pasirinktinį CA failą, importuokite CA failą į sertifikatų " +"saugyklą / raktų pakabuką." msgid "Login/Test" -msgstr "" +msgstr "Prisijungimas / bandymas" msgid "Connection to printers connected via the print host failed." -msgstr "" -"Collegamento alle stampanti collegate tramite l'host di stampa fallito." +msgstr "Nepavyko prisijungti prie spausdintuvų, prijungtų per tinklą." #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "Tipo di Host di stampa non corrispondente: %s" +msgstr "Neatitinka tinklinio spausdintuvo tipas: %s" -msgid "Connection to AstroBox works correctly." -msgstr "La connessione ad AstroBox funziona correttamente." +msgid "Connection to AstroBox is working correctly." +msgstr "Prisijungimas prie AstroBox veikia tinkamai." msgid "Could not connect to AstroBox" -msgstr "Impossibile connettere ad AstroBox" +msgstr "Nepavyko prisijungti prie AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Nota: è richiesta una versione di AstroBox 1.1.0 o successiva." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "Pastaba: reikalinga bent 1.1.0 AstroBox versija." -msgid "Connection to Duet works correctly." -msgstr "La connessione a Duet funziona correttamente." +msgid "Connection to Duet is working correctly." +msgstr "Ryšys su Duet veikia tinkamai." msgid "Could not connect to Duet" -msgstr "Connessione a Duet fallita" +msgstr "Nepavyko prisijungti prie Duet" -msgid "Unknown error occured" -msgstr "Si è verificato un errore sconosciuto" +msgid "Unknown error occurred" +msgstr "Įvyko nežinoma klaida" msgid "Wrong password" -msgstr "Password errata" +msgstr "Neteisingas slaptažodis" msgid "Could not get resources to create a new connection" -msgstr "Non sono state trovate le risorse per stabilire una nuova connessione" +msgstr "Nepavyko gauti išteklių naujam ryšiui sukurti" msgid "Upload not enabled on FlashAir card." -msgstr "Caricamento non attivato sulla scheda FlashAir." +msgstr "Įkėlimas neįjungtas FlashAir kortelėje." -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "" -"Connessione a FlashAir correttamente funzionante e caricamento abilitato." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "Prisijungimas prie FlashAir veikia tinkamai ir įkėlimas įjungtas." msgid "Could not connect to FlashAir" -msgstr "Impossibile connettersi a FlashAir" +msgstr "Nepavyko prisijungti prie „FlashAir“" msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Nota: è necessaria FlashAir con firmware 2.00.02 o successivo e funzione di " -"caricamento attiva." +"Pastaba: reikalinga „FlashAir“ su 2.00.02 ar naujesne programine įranga ir " +"aktyvuota įkėlimo funkcija." -msgid "Connection to MKS works correctly." -msgstr "La connessione a MKS funziona correttamente." +msgid "Connection to MKS is working correctly." +msgstr "Ryšys su MKS veikia tinkamai." msgid "Could not connect to MKS" -msgstr "Non è stato possibile connettersi a MKS" +msgstr "Nepavyko prisijungti prie MKS" -msgid "Connection to OctoPrint works correctly." -msgstr "Connessione con OctoPrint funzionante." +msgid "Connection to OctoPrint is working correctly." +msgstr "Prisijungimas prie OctoPrint veikia tinkamai." msgid "Could not connect to OctoPrint" -msgstr "Impossibile connettersi ad OctoPrint" +msgstr "Nepavyko prisijungti prie „OctoPrint“" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Nota: è richiesta una versione di OctoPrint 1.1.0 o successiva." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "Pastaba: reikalinga bent 1.1.0 OctoPrint versija." -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Collegamento a Prusa SL1 / SL1S correttamente funzionante." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "Ryšys su Prusa SL1 / SL1S veikia tinkamai." msgid "Could not connect to Prusa SLA" -msgstr "Connessione a Prusa SLA fallita" +msgstr "Nepavyko prisijungti prie Prusa SLA" -msgid "Connection to PrusaLink works correctly." -msgstr "Il collegamento a PrusaLink funziona correttamente." +msgid "Connection to PrusaLink is working correctly." +msgstr "Ryšys su PrusaLink veikia tinkamai." msgid "Could not connect to PrusaLink" -msgstr "Impossibile connettersi a PrusaLink" +msgstr "Nepavyko prisijungti prie „PrusaLink“" msgid "Storages found" -msgstr "Trovato spazio di archiviazione" +msgstr "Rastos saugyklos" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" -msgstr "%1% : sola lettura" +msgstr "%1% : tik skaitymui" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" -msgstr "%1% : non c'è spazio libero" +msgstr "%1% : nėra laisvos vietos" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "" -"Caricamento non riuscito. Non è stato trovato uno spazio di archiviazione " -"adatto su %1%." +msgstr "Įkelti nepavyko. %1% tinkamos saugyklos nerasta." -msgid "Connection to Prusa Connect works correctly." -msgstr "Il collegamento a Prusa Connect funziona correttamente." +msgid "Connection to Prusa Connect is working correctly." +msgstr "Ryšys su \"Prusa Connect\" veikia tinkamai." msgid "Could not connect to Prusa Connect" -msgstr "Impossibile connettersi a Prusa Connect" +msgstr "Nepavyko prisijungti prie \"Prusa Connect\"" -msgid "Connection to Repetier works correctly." -msgstr "La connessione a Repetier funziona correttamente." +msgid "Connection to Repetier is working correctly." +msgstr "Ryšys su REpieter veikia tinkamai." msgid "Could not connect to Repetier" -msgstr "Impossibile connettersi a Repetier" +msgstr "Nepavyko prisijungti prie Repieter" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Nota: è richiesta la versione di Repetier almeno 0.90.0." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "Pastaba: reikalinga bent 0.90.0 Repetier versija." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" -"Stato HTTP: %1%\n" -"Corpo messaggio: \"%2%\"" +"HTTP būsena: %1%\n" +"Pranešimo tekstas: \"%2%\"" #, boost-format msgid "" @@ -16225,9 +19923,9 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"L'analisi della risposta dell'host non è riuscita.\n" -"Corpo del messaggio: \"%1%\"\n" -"Errore: \"%2%\"" +"Nepavyko apdoroti tinklo įrenginio atsakymo.\n" +"Pranešimo tekstas: „%1%“\n" +"Klaida: „%2%“" #, boost-format msgid "" @@ -16235,298 +19933,724 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"L'enumerazione delle stampanti host non è riuscita.\n" -"Corpo messaggio: \"%1%\"\n" -"Errore: \"%2%\"" +"Nepavyko suskaičiuoti tinklinių spausdintuvų.\n" +"Pranešimo tekstas: „%1%“\n" +"Klaida: „%2%“" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." +"Dėl mažo sluoksnio aukščio sluoksnio linijos yra beveik nereikšmingos, o " +"spausdinimo kokybė - aukšta. Tinka daugeliui bendrųjų spausdinimo atvejų." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo greitis ir pagreitis " +"yra mažesni, o retas užpildymo raštas yra \"Gyroid\". Taigi, dėl jo " +"pasiekiama daug geresnė spausdinimo kokybė, tačiau daug ilgesnis spausdinimo " +"laikas." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"šiek tiek didesnis, todėl sluoksnio linijos yra beveik nepastebimos, o " +"spausdinimo laikas šiek tiek trumpesnis." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"didesnis, todėl šiek tiek matomos sluoksnio linijos, tačiau trumpesnis " +"spausdinimo laikas." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"mažesnis. Dėl to sluoksnių linijos yra beveik nematomos, o spausdinimo " +"kokybė yra geresnė, tačiau spausdinimo laikas yra ilgesnis." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jis turi mažesnes " +"sluoksnių linijas, mažesnį greitį ir pagreitį, o reto užpildymo raštas yra " +"Gyroid. Dėl to sluoksnių linijos yra beveik nematomos, o spausdinimo kokybė " +"yra daug geresnė, tačiau spausdinimo laikas yra daug ilgesnis." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"mažesnis. Dėl to sluoksnių linijos yra minimalios, o spausdinimo kokybė " +"geresnė, tačiau spausdinimo laikas ilgesnis." + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" +"Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jame yra mažesnės " +"sluoksnio linijos, mažesnis greitis ir pagreitis, o retas užpildymo raštas " +"yra \"Gyroid\". Taigi, dėl jo gaunamos minimalios sluoksnių linijos ir daug " +"geresnė spausdinimo kokybė, tačiau daug ilgesnė spausdinimo trukmė." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" +"Jo sluoksnio aukštis yra normalus. Dėl to gaunamos vidutinės sluoksnio " +"linijos ir spausdinimo kokybė. Jis tinka daugumai spausdinimo atvejų." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jame yra daugiau " +"sienelių kontūrų ir didesnis reto užpildo tankis. Taigi, dėl to spaudiniai " +"būna tvirtesni, tačiau sunaudojama daugiau gijų ir ilgiau trunka " +"spausdinimas." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"didesnis, todėl matomos ryškesnės sluoksnio linijos ir prastesnė spausdinimo " +"kokybė, tačiau šiek tiek trumpesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"didesnis, todėl matomos ryškesnės sluoksnio linijos ir prastesnė spausdinimo " +"kokybė, tačiau trumpesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"mažesnis, todėl mažiau matomos sluoksnio linijos ir geresnė spausdinimo " +"kokybė, tačiau ilgesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis " +"mažesnis, greitis ir pagreitis mažesni, o retas užpildymo raštas yra \"Gyroid" +"\". Taigi, dėl jo mažiau matomų sluoksnio linijų ir daug geresnė spausdinimo " +"kokybė, tačiau daug ilgesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra " +"mažesnis, todėl sluoksnio linijos beveik nežymios, spausdinimo kokybė " +"geresnė, tačiau spausdinimo laikas ilgesnis." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuvo profiliu, jo sluoksnio aukštis yra " +"mažesnis, greitis ir pagreitis mažesni, o reto užpildymo raštas yra Gyroid. " +"Dėl to sluoksnių linijos yra beveik nepastebimos, o spausdinimo kokybė yra " +"daug geresnė, tačiau spausdinimo laikas yra daug ilgesnis." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" +"Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jis turi mažesnį " +"sluoksnio aukštį, todėl sluoksnio linijos yra beveik nežymios, o spausdinimo " +"laikas ilgesnis." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"Jis pasižymi dideliu sluoksnio aukščiu, todėl matomos sluoksnio linijos ir " +"įprasta spausdinimo kokybė bei spausdinimo laikas." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" +"Palyginti su numatytuoju 0,6 mm antgalio profiliu, jame yra daugiau sienų " +"kontūrų ir didesnis reto užpildo tankis. Taigi, dėl to spaudiniai būna " +"tvirtesni, tačiau sunaudojama daugiau gijų ir ilgiau trunka spausdinimas." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,6 mm antgalio profiliu, jo sluoksnio aukštis yra " +"didesnis, dėl to ryškesnės sluoksnio linijos ir prastesnė spausdinimo " +"kokybė, tačiau kai kuriais spausdinimo atvejais sutrumpėja spausdinimo " +"laikas." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,6 mm antgalio profiliu, jo sluoksnio aukštis yra " +"didesnis, todėl sluoksnio linijos yra daug akivaizdesnės, o spausdinimo " +"kokybė daug prastesnė, tačiau kai kuriais spausdinimo atvejais sutrumpėja " +"spausdinimo laikas." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" +"Palyginti su numatytuoju 0,6 mm antgalio profiliu, jo sluoksnio aukštis yra " +"mažesnis, todėl mažiau matomos sluoksnio linijos ir šiek tiek geresnė " +"spausdinimo kokybė, tačiau ilgesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" +"Palyginti su numatytuoju 0,6 mm antgalio profiliu, jo sluoksnio aukštis yra " +"mažesnis, todėl mažiau matomos sluoksnio linijos ir geresnė spausdinimo " +"kokybė, tačiau ilgesnis spausdinimo laikas." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." +"Jo sluoksnio aukštis yra labai didelis. Dėl to sluoksnių linijos yra labai " +"ryškios, spausdinimo kokybė prasta, o spausdinimo laikas trumpesnis." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,8 mm purkštuvo profiliu, jo sluoksnio aukštis yra " +"didesnis. Dėl to sluoksnių linijos yra labai aiškios, o spausdinimo kokybė " +"žymiai prastesnė, tačiau kai kuriais atvejais spausdinimo laikas yra " +"trumpesnis." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,8 mm purkštuvo profiliu, jo sluoksnio aukštis yra " +"daug didesnis. Dėl to sluoksnių linijos tampa labai ryškios, o spausdinimo " +"kokybė – žymiai prastesnė, tačiau kai kuriais atvejais spausdinimo laikas " +"sutrumpėja." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,8 mm antgalio profiliu, jo sluoksnio aukštis yra " +"šiek tiek mažesnis, todėl gaunama šiek tiek mažiau, bet vis tiek matomų " +"sluoksnio linijų ir šiek tiek geresnė spausdinimo kokybė, tačiau kai kuriais " +"spausdinimo atvejais ilgesnis spausdinimo laikas." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" +"Palyginti su numatytuoju 0,8 mm purkštuvo profiliu, jo sluoksnio aukštis yra " +"mažesnis. Dėl to sluoksnių linijos yra mažesnės, bet vis dar matomos, o " +"spausdinimo kokybė yra šiek tiek geresnė, tačiau kai kuriais atvejais " +"spausdinimo laikas yra ilgesnis." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Be AMS" + +msgid "There is no device available to send printing." +msgstr "Nėra įrenginio, kuriam būtų galima siųsti spausdinti." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "Vienu metu naudojamų spausdintuvų skaičius negali būti lygus 0." + +msgid "Use External Spool" +msgstr "Naudoti išorinę ritę" + +msgid "Select Printers" +msgstr "Pasirinkite spausdintuvus" + +msgid "Device Name" +msgstr "Įrenginio pavadinimas" + +msgid "Device Status" +msgstr "Įrenginio būsena" + +msgid "AMS Status" +msgstr "AMS būsena" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Prašome pasirinkti įrenginius, kurios norėsite čia valdyti (iki 6 įrenginių)" + +msgid "Printing Options" +msgstr "Spausdinimo parinktys" + +msgid "Bed Leveling" +msgstr "Lyginimas pagal spausdinimo pagrindą" + +msgid "Flow Dynamic Calibration" +msgstr "Dinaminis srauto kalibravimas" + +msgid "Send Options" +msgstr "Siuntimo parinktys" + +msgid "Send to" +msgstr "Siųsti į" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"spausdintuvus vienu metu. (Priklauso nuo to, kiek įrenginių gali būti " +"kaitinami vienu metu.)" + +msgid "Wait" +msgstr "Laukti" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minutę kiekvienai partijai. (Priklauso nuo to, kiek laiko trunka " +"įkaitinimas.)" + +msgid "Task Sending" +msgstr "Užduotis siunčiama" + +msgid "Task Sent" +msgstr "Užduotis nusiųsta" + +msgid "Edit multiple printers" +msgstr "Taisyti kelis spausdintuvus" + +msgid "Select connected printers (0/6)" +msgstr "Pasirinkite prijungtus spausdintuvus (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Pasirinkite prijungtus spausdintuvus (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Didžiausias pasirenkamų spausdintuvų skaičius yra %d" + +msgid "No task" +msgstr "Nėra užduočių" + +msgid "Edit Printers" +msgstr "Taisyti spausdintuvus" + +msgid "Task Name" +msgstr "Užduoties pavadinimas" + +msgid "Actions" +msgstr "Veiksmai" + +msgid "Task Status" +msgstr "Užduoties būsena" + +msgid "Sent Time" +msgstr "Siuntimo laikas" + +msgid "There are no tasks to be sent!" +msgstr "Čia nėra galimų siųsti užduočių!" + +msgid "No historical tasks!" +msgstr "Be istorinių užduočių!" + +msgid "Upgrading" +msgstr "Atnaujinama" + +msgid "syncing" +msgstr "sinchronizuojama" + +msgid "Printing Finish" +msgstr "Spausdinimas baigtas" + +msgid "Printing Failed" +msgstr "Spausdinimas nepavyko" + +msgid "Printing Pause" +msgstr "Spausdinimo pauzė" + +msgid "Pending" +msgstr "Laukiama" + +msgid "Sending" +msgstr "Siunčiama" + +msgid "Sending Finish" +msgstr "Siuntimas baigtas" + +msgid "Sending Cancel" +msgstr "Siuntimas atšauktas" + +msgid "Sending Failed" +msgstr "Siuntimas nepavyko" + +msgid "Print Success" +msgstr "Sėkmingai atspausdinta" + +msgid "Print Failed" +msgstr "Spausdinimas nepavyko" + +msgid "Removed" +msgstr "Pašalinta" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" -msgstr "" +msgstr "Sėkmingai prisijungta prie \"Obico\"!" msgid "Could not connect to Obico" -msgstr "" +msgstr "Nepavyko prisijungti prie \"Obico" msgid "Connected to SimplyPrint successfully!" -msgstr "" +msgstr "Sėkmingai prisijungta prie \"SimplyPrint\"!" msgid "Could not connect to SimplyPrint" -msgstr "" +msgstr "Nepavyko prisijungti prie \"SimplyPrint" msgid "Internal error" -msgstr "" +msgstr "Vidinė klaida" msgid "Unknown error" -msgstr "" +msgstr "Nežinoma klaida" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" +"\"SimplyPrint\" paskyra nesusieta. Eikite į Prisijungimo parinktis ir ją " +"nustatykite." -msgid "Connection to Flashforge works correctly." -msgstr "" +msgid "Serial connection to Flashforge is working correctly." +msgstr "Nuoseklusis ryšys su „Flashforge“ veikia tinkamai." -msgid "Could not connect to Flashforge" -msgstr "" +msgid "Could not connect to Flashforge via serial" +msgstr "Nepavyko prisijungti prie „Flashforge“ per nuoseklųjį prievadą" msgid "The provided state is not correct." -msgstr "" +msgstr "Pateikta būsena neteisinga." msgid "Please give the required permissions when authorizing this application." -msgstr "" +msgstr "Įgaliodami šią programą suteikite reikiamus leidimus." msgid "Something unexpected happened when trying to log in, please try again." +msgstr "Bandant prisijungti įvyko kažkas netikėto. Bandykite dar kartą." + +msgid "User canceled." +msgstr "Vartotojas atšaukė." + +msgid "Head diameter" +msgstr "Galvutės skersmuo" + +msgid "Max angle" +msgstr "Maksimalus kampas" + +msgid "Detection radius" +msgstr "Aptikimo spindulys" + +msgid "Remove selected points" +msgstr "Pašalinti pasirinktus taškus" + +msgid "Remove all" +msgstr "Pašalinti viską" + +msgid "Auto-generate points" +msgstr "Automatiškai generuoti taškus" + +msgid "Add a brim ear" +msgstr "Krašto \"ausys\"" + +msgid "Delete a brim ear" +msgstr "Ištrinti krašto \"ausį\"" + +msgid "Adjust head diameter" +msgstr "Nustatykite galvutės skersmenį" + +msgid "Adjust section view" +msgstr "Pritaikyti sekcijos vaizdą" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Įspėjimas: Jei krašto tipas nenustatytas kaip „pieštas“, krašto \"ausys\" " +"nebus įjungtos!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Nustatykite šio objekto krašto tipą kaip „pieštas“" + +msgid " invalid brim ears" +msgstr " netinkamos krašto \"ausys\"" + +msgid "Brim Ears" +msgstr "Krašto \"ausys\"" + +msgid "Please select single object." +msgstr "Pasirinkite vieną objektą." + +msgid "Zoom Out" msgstr "" -msgid "User cancelled." +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -16535,9 +20659,9 @@ msgid "" "Did you know that turning on precise wall can improve precision and layer " "consistency?" msgstr "" -"Parete precisa\n" -"Sapevi che l'accensione precisa della parete può migliorare la precisione e " -"l'uniformità degli strati?" +"Tiksli siena\n" +"Ar žinojote, kad įjungus tikslią sienelę galima pagerinti tikslumą ir " +"sluoksnių nuoseklumą?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" @@ -16546,18 +20670,18 @@ msgid "" "precision and layer consistency if your model doesn't have very steep " "overhangs?" msgstr "" -"Modalità sandwich\n" -"Sapevi che puoi utilizzare la modalità sandwich (interno-esterno-interno) " -"per migliorare la precisione e l'uniformità degli strati se il tuo modello " -"non presenta sporgenze molto ripide?" +"Sumuštinio režimas\n" +"Ar žinojote, kad galite naudoti daugiasluoksnį režimą (vidinis-išorinis-" +"vidinis), kad padidintumėte tikslumą ir sluoksnių nuoseklumą, jei jūsų " +"modelyje nėra labai stačių iškyšų?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" -"Temperatura della camera\n" -"Sapevi che Snapmaker Orca supporta la temperatura della camera?" +"Kameros temperatūra\n" +"Ar žinojote, kad \"Snapmaker Orca\" palaiko kameros temperatūrą?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -16565,35 +20689,35 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" -"Taratura\n" -"Sapevi che calibrare la tua stampante può fare miracoli? Dai un'occhiata " -"alla nostra amata soluzione di calibrazione in Snapmaker Orca." +"Kalibravimas\n" +"Ar žinojote, kad spausdintuvo kalibravimas gali padaryti stebuklus? " +"Išbandykite mūsų mėgstamą kalibravimo sprendimą \"Snapmaker Orca\"." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" -"Ventilatore ausiliario\n" -"Sapevi che Snapmaker Orca supporta la ventola di raffreddamento delle parti " -"ausiliarie?" +"Pagalbinis ventiliatorius\n" +"Ar žinojote, kad \"Snapmaker Orca\" palaiko pagalbinį dalių aušinimo " +"ventiliatorių?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" -"Filtrazione dell'aria/ventilatore di scarico\n" -"Sapevi che Snapmaker Orca può supportare la filtrazione dell'aria/Exhaust Fan?" +"Oro filtravimas / išmetimo ventiliatorius\n" +"Ar žinojote, kad \"Snapmaker Orca\" gali palaikyti oro filtravimo / išmetimo " +"ventiliatorių?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" -"Finestra G-code\n" -"È possibile attivare/disattivare la finestra del codice G premendo il tasto " -"C ." +"G-kodo langas\n" +"G-kodo langą galite įjungti arba išjungti paspausdami klavišą C." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -16601,19 +20725,19 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" -"Passare da un'area di lavoro all'altra\n" -"È possibile passare dall'area di lavoro Prepara a quella " -"Anteprima e viceversa premendo il tasto TAB ." +"Perjungti darbines erdves\n" +"Paspaudę Tab klavišą, galite perjungti Paruošti ir " +"Peržiūrėti darbines erdves." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" -"Come utilizzare le scorciatoie da tastiera\n" -"Sapevi che Snapmaker Orca offre un'ampia gamma di scorciatoie da tastiera e " -"operazioni di scena 3D." +"Kaip naudoti klavišų kombinacijas\n" +"Ar žinojote, kad „Snapmaker Orca“ siūlo platų klavišų kombinacijų ir 3D scenos " +"operacijų pasirinkimą?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16621,9 +20745,9 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" -"Retromarcia su dispari\n" -"Sapevi che la retromarcia su elementi dispari può migliorare " -"significativamente la qualità della superficie delle tue sporgenze?" +"Atvirkštinis ant nelyginio paviršiaus\n" +"Ar žinojote, kad atvirkštinio ant nelyginio paviršiaus funkcija gali " +"gerokai pagerinti jūsų iškyšų paviršiaus kokybę?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16631,9 +20755,9 @@ msgid "" "Did you know that you can cut a model at any angle and position with the " "cutting tool?" msgstr "" -"Strumento di taglio\n" -"Sapevate che è possibile tagliare un modello in qualsiasi angolazione e " -"posizione con l'utensile di taglio?" +"Pjovimo įrankis\n" +"Ar žinojote, kad pjovimo įrankiu galite pjauti modelį bet kokiu kampu ir bet " +"kokioje padėtyje?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" @@ -16641,35 +20765,36 @@ msgid "" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " "problems on the Windows system?" msgstr "" -"Correggi modello\n" -"Sapevi che puoi riparare un modello 3D danneggiato per evitare molti " -"problemi di slicing sul sistema Windows?" +"Fiksuoti modelį\n" +"Ar žinojote, kad galite ištaisyti sugadintą 3D modelį ir išvengti daugybės " +"sluoksniavimo problemų \"Windows\" sistemoje?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" -"Timelapse\n" -"Sapevi che puoi generare un video timelapse durante ogni stampa?" +"Laiko intervalas\n" +"Ar žinojote, kad kiekvieno spausdinimo metu galite sukurti laiko intervalų " +"vaizdo įrašą?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" -"Disposizione automatica\n" -"Sapevi che puoi disporre automaticamente tutti gli oggetti del tuo progetto?" +"Automatinis išdėstymas\n" +"Ar žinojote, kad galite automatiškai išdėstyti visus savo projekto objektus?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" -"Orientamento automatico\n" -"Sapevi che puoi orientare gli oggetti in modo ottimale per la stampa con un " -"semplice clic?" +"Automatinis orientavimas\n" +"Ar žinojote, kad vienu paspaudimu galite pasukti objektus į optimalų " +"orientavimą spausdinimui?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" @@ -16678,10 +20803,10 @@ msgid "" "sits on the print bed? Select the \"Place on face\" function or press the " "F key." msgstr "" -"Posiziona su faccia\n" -"Sapevate che è possibile orientare rapidamente un modello in modo che una " -"delle sue facce si trovi sul piatto di stampa? Selezionare la funzione " -"\"Posiziona su faccia\" o premere il tasto F ." +"Padėti ant plokštumos\n" +"Ar žinojote, kad galite greitai suorientuoti modelį taip, kad viena jo " +"plokštuma būtų ant spausdinimo plokštės? Pasirinkite funkciją \"Padėti ant " +"plokštumos\" arba paspauskite klavišą F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -16689,9 +20814,9 @@ msgid "" "Did you know that you can view all objects/parts in a list and change " "settings for each object/part?" msgstr "" -"Elenco oggetti\n" -"Sapevate che è possibile visualizzare tutti gli oggetti/parti in un elenco e " -"modificare le impostazioni per ciascun oggetto/parte?" +"Objektų sąrašas\n" +"Ar žinojote, kad visus objektus/dalis galite peržiūrėti sąraše ir keisti " +"kiekvieno objekto/dalies nustatymus?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" @@ -16699,9 +20824,9 @@ msgid "" "Did you know that you use the Search tool to quickly find a specific Orca " "Slicer setting?" msgstr "" -"Funzionalità di ricerca\n" -"Sapevi che puoi usare lo strumento di ricerca per trovare rapidamente " -"un'impostazione specifica di Snapmaker Orca?" +"Paieškos funkcijos\n" +"Ar žinojote, kad naudodami paieškos įrankį galite greitai rasti konkretų " +"\"Snapmaker Orca\" nustatymą?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -16709,10 +20834,10 @@ msgid "" "Did you know that you can reduce the number of triangles in a mesh using the " "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" -"Semplifica modello\n" -"Sapevi che puoi ridurre il numero di triangoli in una mesh utilizzando la " -"funzione Semplifica mesh? Fare clic con il pulsante destro del mouse sul " -"modello e selezionare Semplifica modello." +"Supaprastinti modelį\n" +"Ar žinojote, kad galite sumažinti trikampių skaičių figūroje naudodami " +"funkciją \"Supaprastinti modelį\"? Dešiniuoju pelės klavišu spustelėkite " +"modelį ir pasirinkite Supaprastinti modelį." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" @@ -16720,9 +20845,9 @@ msgid "" "Did you know that you can view all objects/parts on a table and change " "settings for each object/part?" msgstr "" -"Tabella Parametri Slicing\n" -"Sapevate che è possibile visualizzare tutti gli oggetti/parti di una tabella " -"e modificare le impostazioni di ciascun oggetto/parte?" +"Sluoksniavimo parametrų lentelė\n" +"Ar žinojote, kad lentelėje galite peržiūrėti visus objektus/dalis ir keisti " +"kiekvieno objekto/dalies nustatymus?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" @@ -16730,9 +20855,9 @@ msgid "" "Did you know that you can split a big object into small ones for easy " "colorizing or printing?" msgstr "" -"Dividi in oggetti/parti\n" -"Sapevi che è possibile dividere un oggetto grande in piccoli oggetti per " -"facilitare la colorazione o la stampa?" +"Skirstymas į objektus/dalis\n" +"Ar žinojote, kad didelį objektą galite suskaidyti į mažesnius, kad būtų " +"lengviau jį nuspalvinti ar spausdinti?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" @@ -16741,10 +20866,10 @@ msgid "" "part modifier? That way you can, for example, create easily resizable holes " "directly in Snapmaker Orca." msgstr "" -"Sottrazione di una parte\n" -"Sapevi che puoi sottrarre una mesh da un'altra usando il modificatore Parte " -"negativa? In questo modo è possibile, ad esempio, creare fori facilmente " -"ridimensionabili direttamente in Snapmaker Orca." +"Atimti dalį\n" +"Ar žinojote, kad galite atimti vieną figūrą iš kitos naudodami modifikatorių " +"\"Negatyvioji dalis\"? Taip galite, pavyzdžiui, tiesiogiai \"Snapmaker Orca\" " +"programoje kurti lengvai keičiamo dydžio skyles." #: resources/data/hints.ini: [hint:STEP] msgid "" @@ -16754,11 +20879,11 @@ msgid "" "Snapmaker Orca supports slicing STEP files, providing smoother results than a " "lower resolution STL. Give it a try!" msgstr "" -"PASSO\n" -"Sapevi che puoi migliorare la tua qualità di stampa tagliando un file STEP " -"invece di un STL?\n" -"Snapmaker Orca supporta il sezionamento dei file STEP, fornendo risultati più " -"uniformi rispetto a un STL a risoluzione inferiore. Provateci!" +"STEP\n" +"Ar žinojote, kad spausdinimo kokybę galite pagerinti sluoksniuodami ne STL, " +"o STEP failą?\n" +"\"Snapmaker Orca\" palaiko STEP failų sluoksniavimą ir užtikrina sklandesnį " +"rezultatą nei mažesnės raiškos STL. Išbandykite!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -16767,10 +20892,10 @@ msgid "" "paint it on your print, to have it in a less visible location? This improves " "the overall look of your model. Check it out!" msgstr "" -"Posizione giunzione Z\n" -"Sapevi che puoi personalizzare la posizione della giunzione Z e persino " -"dipingerla sulla stampa, per averla in una posizione meno visibile? Ciò " -"migliora l'aspetto generale del modello. Dai un'occhiata!" +"Z siūlės vieta\n" +"Ar žinojote, kad galite keisti Z siūlės vietą ir net nupiešti ją ant " +"spaudinio, kad ji būtų mažiau matomoje vietoje? Tai pagerina bendrą modelio " +"išvaizdą. Patikrinkite!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" @@ -16779,10 +20904,10 @@ msgid "" "prints? Depending on the material, you can improve the overall finish of the " "printed model by doing some fine-tuning." msgstr "" -"Regolazione precisa del flusso\n" -"Sapevi che la velocità del flusso può essere regolata con precisione per " -"stampe ancora più belle? A seconda del materiale, è possibile migliorare la " -"finitura complessiva del modello stampato effettuando regolazioni precise." +"Tikslus srauto greičio reguliavimas\n" +"Ar žinojote, kad srauto greitį galima tiksliai sureguliuoti, kad spaudiniai " +"atrodytų dar geriau? Priklausomai nuo medžiagos, atlikdami smulkų " +"reguliavimą galite pagerinti bendrą atspausdinto modelio apdailą." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" @@ -16791,10 +20916,9 @@ msgid "" "individual plates ready to print? This will simplify the process of keeping " "track of all the parts." msgstr "" -"Dividi le stampe in piatti\n" -"Sapevi che puoi dividere un modello con molte parti in singoli piatti pronti " -"per la stampa? Ciò semplificherà il processo di elaborazione di tutte le " -"parti." +"Suskirstykite atspaudus į plokštes\n" +"Ar žinojote, kad daug dalių turintį modelį galite padalyti į atskiras " +"spausdinti paruoštas plokštes? Tai supaprastins visų dalių apskaitos procesą." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] @@ -16803,9 +20927,9 @@ msgid "" "Did you know that you can print a model even faster, by using the Adaptive " "Layer Height option? Check it out!" msgstr "" -"Accelera la stampa con l'opzione Layer Adattativo\n" -"Sapevi che puoi stampare un modello ancora più velocemente utilizzando " -"l'opzione Layer Adattativo? Scoprilo!" +"Spartinkite spausdinimą naudodami prisitaikantį sluoksnio aukštį\n" +"Ar žinojote, kad naudodami parinktį Prisitaikantis sluoksnio aukštis galite " +"spausdinti modelį dar greičiau? Patikrinkite!" #: resources/data/hints.ini: [hint:Support painting] msgid "" @@ -16814,10 +20938,10 @@ msgid "" "makes it easy to place the support material only on the sections of the " "model that actually need it." msgstr "" -"Pitturare supporti\n" -"Sapevi che è possibile pitturare la posizione dei supporti? Questa funzione " -"consente di posizionare facilmente il materiale di supporto solo sulle " -"sezioni del modello che ne hanno effettivamente bisogno." +"Atramų piešimas\n" +"Ar žinojote, kad galite nupiešti savo atramų vietą? Ši funkcija leidžia " +"lengvai naudoti atraminę medžiagą tik tose modelio dalyse, kuriose jos iš " +"tikrųjų reikia." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" @@ -16826,10 +20950,10 @@ msgid "" "supports work great for organic models, while saving filament and improving " "print speed. Check them out!" msgstr "" -"Diversi tipi di supporto\n" -"Sapevate che potete scegliere tra diversi tipi di supporto? I supporti ad " -"albero funzionano benissimo per i modelli organici, risparmiando filamento e " -"migliorando la velocità di stampa. Scopriteli!" +"Įvairių tipų atramos\n" +"Ar žinojote, kad galite rinktis iš kelių tipų atramų? Medžio formos atramos " +"puikiai tinka organiniams modeliams, taupo gijas ir padidina spausdinimo " +"greitį. Išbandykite jas!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" @@ -16838,48 +20962,48 @@ msgid "" "successfully? Higher temperature and lower speed are always recommended for " "the best results." msgstr "" -"Stampa di filamento Silk (seta)\n" -"Sapevi che il filamento seta richiede un'attenzione speciale per stampare " -"con successo? Una temperatura più alta e una velocità inferiore sono sempre " -"consigliate per ottenere i migliori risultati." +"Spausdinimas šilko gija\n" +"Ar žinojote, kad norint sėkmingai atspausdinti šilko giją reikia ypatingo " +"dėmesio? Siekiant geriausių rezultatų, visada rekomenduojama aukštesnė " +"temperatūra ir mažesnis greitis." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" -"Brim per una migliore adesione\n" -"Sapevate che quando i modelli stampati hanno una piccola interfaccia di " -"contatto con la superficie di stampa, si consiglia di utilizzare un brim?" +"Kraštas geresniam sukibimui\n" +"Ar žinojote, kad kai spausdinimo modeliai turi nedidelę sąlyčio sąsają su " +"spausdinimo paviršiumi, rekomenduojama naudoti kraštą?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" -"Impostare i parametri per più oggetti\n" -"Sapevi che puoi impostare i parametri di elaborazione per tutti gli oggetti " -"selezionati contemporaneamente?" +"Nustatyti parametrus keliems objektams\n" +"Ar žinojote, kad galite nustatyti sluoksniavimo parametrus visiems " +"pasirinktiems objektams iš karto?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" -"Impila oggetti\n" -"Sapevi che puoi impilare oggetti interi?" +"Daiktų krūva\n" +"Ar žinojote, kad objektus galima sudėti į krūvą kaip vieną?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" -"Spurga nei supporti/oggetti/riempimenti\n" -"Sapevi che puoi ridurre lo spreco di filamento spurgandolo nei supporti/" -"oggetti/riempimenti durante la sostituzione del filamento?" +"Išspausti į atramą/objektus/užpildą \n" +"Ar žinojote, kad galite sutaupyti eikvojamą giją, išspaudžiant ją į atramą/" +"objektus/užpildą keičiant giją?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" @@ -16887,1090 +21011,1532 @@ msgid "" "Did you know that you can use more wall loops and higher sparse infill " "density to improve the strength of the model?" msgstr "" -"Migliorare la resistenza\n" -"Sapevate che è possibile utilizzare un maggior numero di anelli a parete e " -"una maggiore densità riempimento per migliorare la resistenza del modello?" +"Padidinkite stiprumą\n" +"Ar žinojote, kad modelio tvirtumui padidinti galite naudoti daugiau sienų " +"kontūrų ir didesnį reto užpildo tankį?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"Quando è necessario stampare con lo sportello della stampante aperto\n" -"Sapevi che l'apertura dello sportello della stampante può ridurre la " -"probabilità di intasamento dell'estrusore/hotend quando si stampa filamento " -"a temperatura inferiore con una temperatura dell'involucro più elevata. " -"Maggiori informazioni su questo nel Wiki." +"Kai reikia spausdinti atidarius spausdintuvo dureles\n" +"Ar žinojote, kad atidarius spausdintuvo dureles gali sumažėti ekstruderio ir " +"(arba) karštosios jungties užsikimšimo tikimybė, kai spausdinate žemesnės " +"temperatūros filamentą su aukštesne korpuso temperatūra. Daugiau " +"informacijos apie tai rasite \"Wiki\"." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" -"Evita la deformazione\n" -"Sapevi che quando si stampano materiali soggetti a deformazioni come l'ABS, " -"aumentare in modo appropriato la temperatura del piano riscaldato può " -"ridurre la probabilità di deformazione." +"Išvengti deformacijos\n" +"Ar žinojote, kad spausdinant medžiagas, kurios linkusios deformuotis, " +"pavyzdžiui, ABS, tinkamai padidinus kaitinimo pagrindo temperatūrą galima " +"sumažinti deformavimosi tikimybę." -#~ msgid "Please input a valid value (K in 0~0.3)" -#~ msgstr "Immettere un valore valido (K in 0~0.3)" +#~ msgid "Junction Deviation calibration" +#~ msgstr "Jungties nuokrypio kalibravimas" -#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Immettere un valore valido (K in 0~0.3, N in 0.6~2.0)" - -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "Connessione locale della stampante fallita; Si prega di riprovare." +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Ekstruderis %d" #~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" #~ msgstr "" -#~ "I dettagli della calibrazione dinamica del flusso sono disponibili nel " -#~ "nostro wiki.\n" -#~ "\n" -#~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a " -#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso" -#~ "\" selezionata nel menu di avvio della stampa, la stampante seguirà il " -#~ "vecchio modo, calibrando il filamento prima della stampa; Quando si avvia " -#~ "una stampa multicolore/materiale, la stampante utilizzerà il parametro di " -#~ "compensazione predefinito per il filamento durante ogni cambio di " -#~ "filamento, che avrà un buon risultato nella maggior parte dei casi.\n" -#~ "\n" -#~ "Si prega di notare che ci sono alcuni casi che renderanno il risultato " -#~ "della calibrazione non affidabile: utilizzo di una piastra di texture per " -#~ "eseguire la calibrazione; Il piano di stampa non ha una buona adesione (è " -#~ "consigliato lavarlo o applicare della colla stick!) ... Puoi trovare di " -#~ "più dal nostro wiki.\n" -#~ "\n" -#~ "I risultati della calibrazione hanno un jitter di circa il 10% nel nostro " -#~ "test, il che potrebbe causare un risultato non esattamente lo stesso in " -#~ "ogni calibrazione. Stiamo ancora indagando sulla causa principale per " -#~ "apportare miglioramenti con i nuovi aggiornamenti." +#~ "Maksimalus jungties nuokrypis (M205 J, taikoma tik jei JD > 0 Marlin " +#~ "Firmware)" + +#~ msgid "Adaptive layer height" +#~ msgstr "Prisitaikantis sluoksnio aukštis" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Įjungus šią parinktį, medžio atraminio sluoksnio, išskyrus pirmąjį, " +#~ "aukštis bus apskaičiuojamas automatiškai." + +#~ msgid "Junction Deviation test" +#~ msgstr "Jungties nuokrypio bandymas" + +#~ msgid "Start junction deviation: " +#~ msgstr "Pradinis jungties nuokrypis: " + +#~ msgid "End junction deviation: " +#~ msgstr "Galinis jungties nuokrypis: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Jungties nuokrypio nustatymai" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "Pastaba: mažesnės vertės = aštresni kampai, bet mažesnis greitis" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" +#~ msgstr "" +#~ "Įveskite tinkamas reikšmes:\n" +#~ "(0 <= Jungties nuokrypis < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "PASTABA: Didelės vertės gali sukelti sluoksnio poslinkį" + +#~ msgid "AMS not connected" +#~ msgstr "AMS neprijungta" + +#~ msgid "Ext Spool" +#~ msgstr "Išor ritė" + +#~ msgid "Guide" +#~ msgstr "Instrukcija" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Kalibruojama AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Kalibruojant aptikta problema. Paspauskite kad pamatytumėte sprendimą." + +#~ msgid "Calibrate again" +#~ msgstr "Kalibruoti dar kartą" + +#~ msgid "Cancel calibration" +#~ msgstr "Atšaukti kalibravimą" + +#~ msgid "Feed Filament" +#~ msgstr "Paduoti giją" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Prieš spausdinant per vietinį tinklą, reikia įdėti SD kortelę." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Prieš siunčiant į spausdintuvą reikia įdėti SD kortelę." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Pastaba: Galima pasirinkti tik tuos AMS lizdus, kuriose yra tos pačios " +#~ "rūšies medžiaga." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Jei AMS yra dvi identiškos gijos, tuomet bus įjungta AMS atsarginė " +#~ "gija. \n" +#~ "(Šiuo metu palaikomas automatinis to paties prekės ženklo, medžiagos tipo " +#~ "ir spalvos eksploatacinių medžiagų padavimas)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "Atnaujinus gijų informaciją, AMS įvertins likusį Bambu gijų kiekį. " +#~ "Spausdinimo metu likęs kiekis bus atnaujinamas automatiškai." + +#, fuzzy +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Rekomenduojama minimali temperatūra yra žemesnė nei 190 laipsnių arba " +#~ "maksimali temperatūra aukštesnė nei 300 laipsnių.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Spiralės režimas veikia tik tada, kai sienelės sluoksnių skaičius yra 1, " +#~ "atramos yra išjungtos, viršutinių sluoksnių skaičius yra 0, Retas " +#~ "užpildas yra 0% ir pakadrinis įrašymas tipas yra tradicinis." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Kalibravimo judesiai X ir Y ašyse" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pristabdyta dėl gijos pasibaigimo" + +#~ msgid "Heating hotend" +#~ msgstr "Kaitinama galvutė" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Kalibruojamas išspaudimas" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Spausdinimas pristabdytas naudotojo" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pristabdymas dėl priekinio dangtelio gedimo" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Gijos išspaudimo srauto kalibravimas" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pristabdyta dėl purkštuko temperatūros gedimo" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pristabdyta dėl pagrindo temperatūros gedimo" + +#~ msgid "Skip step pause" +#~ msgstr "Praleisti žingsnio pauzę" + +#~ msgid "Motor noise calibration" +#~ msgstr "Variklių triukšmo kalibravimas" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pristabdyta dėl AMS praradimo" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Pristabdyta dėl per mažo šilumos slenksčio ventiliatoriaus greičio" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pristabdyta dėl kameros temperatūros valdymo klaidos" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pristabdyta dėl naudotojo įterpto G-kodo" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pristabdyta - aptikta užspausta gija antgalyje" + +#~ msgid "Cutter error pause" +#~ msgstr "Pristabdyta dėl pjovimo klaidos" + +#~ msgid "First layer error pause" +#~ msgstr "Pristabdyta dėl pirmojo sluoksnio klaidos" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pristabdyta dėl galvutės užsikimšimo" + +#~ msgid "Fatal" +#~ msgstr "Kritinė" + +#~ msgid "Serious" +#~ msgstr "Svarbi" + +#~ msgid "Common" +#~ msgstr "Pasikartojanti" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "AMS nepalaiko Bambu PET-CF/PA6-CF." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Objektas yra už spausdinimo plokštės ribų arba viršija aukščio limitą.\n" +#~ "Norėdami išspręsti problemą, perkelkite objektą visiškai ant plokštės " +#~ "arba nuo jos ir įsitikinkite, kad aukštis yra leidžiamame spausdinimo " +#~ "tūryje." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Galite jį rasti spausdintuvo nustatymuose, skiltyje \"Tinklas\" > \n" +#~ "\"Prisijungimo kodas\", kaip parodyta paveikslėlyje:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Failų naršymas SD kortelėje nepalaikomas naudojant dabartinę programinę " +#~ "įrangą (firmware). Atnaujinkite spausdintuvo programinę įrangą." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Patikrinkite, ar SD kortelė įdėta į spausdintuvą.\n" +#~ "Jei jos vis tiek nepavyksta nuskaityti, galite pabandyti suformatuoti SD " +#~ "kortelę." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "Failų naršymas SD kortelėje nepalaikomas LAN Only režime." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Saugykla nepasiekiama, įdėkite SD kortelę." + +#~ msgid "Cham" +#~ msgstr "Kam" + +#~ msgid "Still unload" +#~ msgstr "Vis dar išstumiama" + +#~ msgid "Still load" +#~ msgstr "Vis dar įtraukiama" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Negalima šito pradėti be SD kortelės." + +#~ msgid "Update" +#~ msgstr "Atnaujinti" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Pristabdymo jautrumas yra" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Nėra AMS gijų. Kad būtų galima įkelti AMS informaciją, pasirinkite " +#~ "spausdintuvą \"Įrenginių\" puslapyje." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Sinchronizuojant gijas su AMS bus prarasti visi dabartiniai gijų " +#~ "parametrai ir spalvos. Ar norite tęsti?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Sinchronizavimas jau atliktas. Ar norite sinchronizuoti tik pakeitimus, " +#~ "ar iš naujo sinchronizuoti viską?" + +#~ msgid "Sync" +#~ msgstr "Sinchronizuoti" + +#~ msgid "Resync" +#~ msgstr "Viską" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Yra keletas nežinomų gijų, priskirtų bendram išankstiniam nustatymui. " +#~ "Atnaujinkite Snapmaker Orca arba paleiskite Snapmaker Orca iš naujo, kad " +#~ "patikrintų, ar yra sistemos išankstinių nustatymų atnaujinimas." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Ar tikrai norite saugoti originalius SVG failus su jų lokaliais keliais " +#~ "3MF faile?\n" +#~ "Jei pasirinksite „NE“, visi projekto SVG failai daugiau nebus redaguojami." + +#~ msgid "Private protection" +#~ msgstr "Privatumo apsauga" + +#~ msgid "General Settings" +#~ msgstr "Bendri nustatymai" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Pradėjus rodyti pranešimą „Dienos patarimas“" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Jei įjungta, paleidžiant rodomi naudingi patarimai." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Išmetimo apimtys: Automatinis skaičiavimas kaskart, kai pasikeičia spalva." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Jei įjungta, automatinis skaičiavimas atliekamas kaskart, kai pasikeičia " +#~ "spalva." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Valymo erdvės: Automatiškai perskaičiuoti kiekvieną kartą pasikeitus " +#~ "gijai." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Jei įjungtas, kiekvieną kartą pasikeitus gijai automatiškai perskaičiuoja" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Automatinis plokštės išdėstymas po objekto klonavimo" + +#~ msgid "Network" +#~ msgstr "Tinklas" + +#~ msgid "User Sync" +#~ msgstr "Naudotojo sinchronizavimas" + +#~ msgid "System Sync" +#~ msgstr "Sistemos sinchronizavimas" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Susieti URL su Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "kiekvienas" + +#~ msgid "Downloads" +#~ msgstr "Atsisuntimai" + +#~ msgid "Dark Mode" +#~ msgstr "Tamsusis režimas" + +#~ msgid "Home page and daily tips" +#~ msgstr "Pagrindinis puslapis ir dienos patarimai" + +#~ msgid "Show home page on startup" +#~ msgstr "Startuojant rodyti pagrindinį puslapį" + +#~ msgid "Please choose the filament color" +#~ msgstr "Prašome pasirinkti gijos spalvą" + +#~ msgid "Send print job to" +#~ msgstr "Siųsti spausdinti į" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Gija %s viršija gijų rūšių skaičių, lyginant su AMS lizdų skaičiumi. " +#~ "Atnaujinkite spausdintuvo programinę įrangą, kad galėtumėte priskirti " +#~ "lizdus AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Įdėta daugiau gijų rūšių, nei turite AMS lizdų. Atnaujinkite spausdintuvo " +#~ "programinę įrangą, kad galėtumėte priskirti lizdus AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Gijų priskyrimas AMS lizdams atliktas. Norėdami pakeisti AMS lizdą, " +#~ "spustelėkite giją viršuje" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Prieš siųsdami spausdinimo užduotį, spustelėkite kiekvieną giją viršuje, " +#~ "kad nurodytumėte jos priskyrimą AMS lizdui" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Spausdintuvo programinė įranga palaiko tik nuoseklų gijų ir AMS lizdų " +#~ "susiejimą." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Prieš spausdinant reikia įdėti SD kortelę." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Norint įrašinėti pakadrinius video, reikia įdėti SD kortelę." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "purkštukas nustatytas: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "įsimintas purkštukas: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Purkštuko skersmuo susluoksniuotame faile neatitinka išsaugoto purkštuko " +#~ "skersmens. Jei pastaruoju metu pakeitėte purkštuką, eikite į Įrenginys > " +#~ "Spausdintuvo dalys ir pakeiskite nustatymus." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Spausdinant aukštos temperatūros medžiagą (%s medžiaga) su %s, gali būti " +#~ "sugadintas purkštukas" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "Jungiamasi prie spausdintuvo. Negalima atšaukti jungimosi metu." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Dėmesio! Srauto kalibravimas ant tekstūruotos PEI gali nepavykti dėl " +#~ "nelygaus paviršiaus." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Automatinis srauto kalibravimas naudojant mikrolidarą" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Siųsti į spausdintuvo SD kortelę" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Prieš siunčiant į spausdintuvo SD kortelę, reikia įdėti SD kortelę." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Spausdintuvas nepalaiko siuntimo į spausdintuvo SD kortelę." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Spalvų skaičius turėtų būti tarp [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Dabartinės gijų spalvos:" + +#~ msgid "Quick set:" +#~ msgstr "Greitas nustatymas:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Po esamų ekstruderių pridėti eksploatacinių medžiagų ekstruderį." + +#~ msgid "Cluster colors" +#~ msgstr "Klasterio spalvos" + +#~ msgid "Map Filament" +#~ msgstr "Ženklinti giją" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Pastaba: spalva buvo pasirinkta, galite pasirinkti Gerai \n" +#~ "tęsti arba ją koreguoti rankiniu būdu." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Dėmesio: Naujai pridėtų ir \n" +#~ "esamų ekstruderių skaičius viršija 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Automatinis skaičiavimas" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca iš naujo apskaičiuos išspaudimo kiekį kaskart, kai pasikeis siūlų " +#~ "spalva. Automatinį skaičiavimą galite išjungti Snapmaker Orca > Nustatymai" + +#~ msgid "unloaded" +#~ msgstr "išimtas" + +#~ msgid "loaded" +#~ msgstr "įkeltas" + +#~ msgid "Filament #" +#~ msgstr "Gijos #" + +#~ msgid "From" +#~ msgstr "Nuo" + +#~ msgid "To" +#~ msgstr "Į" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Tęsti spausdinimą (priimtini defektai)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Tęsti spausdinimą (problema išspręsta)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "1 žingsnis. Patikrinkite, ar „Snapmaker Orca“ ir spausdintuvas yra tame " +#~ "pačiame tinkle." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2 žingsnis. Jei toliau nurodyti IP ir prieigos kodai skiriasi nuo tikrųjų " +#~ "spausdintuvo verčių, pataisykite juos." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "3 veiksmas. Iš spausdintuvo pusės gaukite įrenginio SN; paprastai jį " +#~ "rasite spausdintuvo ekrane esančioje įrenginio informacijoje." + +#~ msgid "Laser 10 W" +#~ msgstr "Lazeris 10 W" + +#~ msgid "Laser 40 W" +#~ msgstr "Lazeris 40 W" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " yra per arti kitų, spausdinant gali įvykti susidūrimų." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Negalima kartu spausdinti kelių gijų, kurių temperatūrų skirtumai yra " +#~ "dideli. Priešingu atveju spausdinant gali užsikimšti purkštukas arba " +#~ "sugesti ekstruderis." + +#~ msgid "Ironing angle" +#~ msgstr "Lyginimo kampas" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Atliekamas kampinis lyginimas. Neigiamas skaičius išjungia šią funkciją " +#~ "ir naudojamas numatytasis metodas." + +#~ msgid "Remove small overhangs" +#~ msgstr "Pašalinti nedideles iškyšas" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Pašalinti nedideles iškyšas, kurioms galbūt nereikia atramų." + +#~ msgid "Width of the brim." +#~ msgstr "Krašto plotis." #~ msgid "" #~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" +#~ "you want to overwrite the other results?" #~ msgstr "" -#~ "Verrà salvato solo uno dei risultati con lo stesso nome. Si è sicuri di " -#~ "voler sovrascrivere gli altri risultati?" +#~ "Bus išsaugotas tik vienas iš to paties pavadinimo rezultatų. Ar tikrai " +#~ "norite pakeisti kitus rezultatus?" + +#~ msgid "External Spool" +#~ msgstr "Išorinė ritė" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Įveskite tinkamas reikšmes:\n" +#~ "Pradžios temp: <= 350\n" +#~ "Galutinė temp: >= 170\n" +#~ "Pradžios temp > Galutinė temp + 5)" + +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Rekomenduojama: nustatykite „“Slopinimas“ į 0.\n" +#~ "Tai leis naudoti spausdintuvo numatytąją arba paskutinę išsaugotą vertę." + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "Pasirinktinis spausdintuvas arba modelis neįvestas, įveskite jį." + +#~ msgid "BigTraffic" +#~ msgstr "Didelis srautas" #, c-format, boost-format -#~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" -#~ msgstr "" -#~ "Esiste già un risultato di calibrazione storico con lo stesso nome: %s. " -#~ "Viene salvato solo uno dei risultati con lo stesso nome. Si è sicuri di " -#~ "voler eseguire l'override del risultato cronologico?" - -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "Si prega di trovare il cornor con il perfetto grado di estrusione" - -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "purkštukas parametre: %s %s" #~ msgid "" -#~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " -#~ "first, which works best in most cases.\n" -#~ "\n" -#~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " -#~ "push out the printed walls where it is attached to them, resulting in a " -#~ "worse external surface finish. It can also cause the infill to shine " -#~ "through the external surfaces of the part." +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" #~ msgstr "" -#~ "Ordine di parete/tamponamento. Quando la casella di controllo è " -#~ "deselezionata, i muri vengono stampati per primi, il che funziona meglio " -#~ "nella maggior parte dei casi.\n" -#~ "\n" -#~ "La stampa delle pareti può aiutare con sporgenze estreme poiché le pareti " -#~ "hanno il riempimento vicino a cui aderire. Tuttavia, il riempimento " -#~ "spingerà leggermente fuori le pareti stampate dove è attaccato ad esse, " -#~ "con conseguente peggioramento della finitura superficiale esterna. Può " -#~ "anche far brillare il riempimento attraverso le superfici esterne della " -#~ "parte." - -#~ msgid "V" -#~ msgstr "V" - -#~ msgid "" -#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " -#~ "Ranellucci and the RepRap community" -#~ msgstr "" -#~ "Snapmaker Orca è basato su BambuStudio di Bambulab, che è di PrusaSlicer di " -#~ "Prusa Research. PrusaSlicer è di Slic3r di Alessandro Ranellucci e della " -#~ "comunità RepRap" - -#~ msgid "Export &Configs" -#~ msgstr "Esporta &Configurazioni" - -#~ msgid "Infill direction" -#~ msgstr "Direzione riempimento" - -#~ msgid "" -#~ "Enable this to get a G-code file which has G2 and G3 moves. And the " -#~ "fitting tolerance is same with resolution" -#~ msgstr "" -#~ "Abilita questa funzione per ottenere un file G-code con gli spostamenti " -#~ "circolari in G2 e G3. La tolleranza di adattamento è la stessa della " -#~ "risoluzione" - -#~ msgid "" -#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " -#~ "The percentage value is relative to line width of sparse infill" -#~ msgstr "" -#~ "Ciò consente di allargare leggermente l'area di riempimento per " -#~ "sovrapporla alle pareti per una migliore adesione. Il valore percentuale " -#~ "è relativo alla larghezza della linea del riempimento." - -#~ msgid "Export Configs" -#~ msgstr "Esporta &Configurazioni" - -#~ msgid "Unload Filament" -#~ msgstr "Scarica Filamento" - -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Seleziona uno slot AMS, premi \"Carica\" o \"Scarica\" per caricare o " -#~ "scaricare automaticamente il filamento." - -#~ msgid "MC" -#~ msgstr "MC" - -#~ msgid "MainBoard" -#~ msgstr "MainBoard" - -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- °C" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - -#~ msgid "active" -#~ msgstr "attivo" - -#~ msgid "Jump to layer" -#~ msgstr "Vai al layer" - -#~ msgid "Cabin humidity" -#~ msgstr "Umidità della cabina" - -#~ msgid "" -#~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" -#~ msgstr "" -#~ "Il verde indica che l'umidità dell'AMS è normale, l'arancione che " -#~ "l'umidità è elevata, il rosso rappresenta un'umidità troppo elevata " -#~ "(igrometro: più basso è, meglio è)." - -#~ msgid "Desiccant status" -#~ msgstr "Stato dell'essiccante" - -#~ msgid "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" -#~ msgstr "" -#~ "Uno stato dell'essiccante inferiore a due barre indica che l'essiccante " -#~ "potrebbe essere inattivo. Si prega di sostituire l'essiccante. (Le barre: " -#~ "più sono alte, meglio è)." - -#~ msgid "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." -#~ msgstr "" -#~ "Nota: quando il coperchio è aperto o la confezione di essiccante viene " -#~ "cambiata, possono essere necessarie ore o una notte per assorbire " -#~ "l'umidità. Anche le basse temperature rallentano il processo. Durante " -#~ "questo periodo, l'indicatore potrebbe non rappresentare la camera con " -#~ "precisione." - -#~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing is completed." -#~ msgstr "" -#~ "Nota: se durante la stampa viene inserito un nuovo filamento, l'AMS non " -#~ "leggerà automaticamente alcuna informazione fino al termine della stampa." - -#, boost-format -#~ msgid "Succeed to export G-code to %1%" -#~ msgstr "Successo! G-code esportato in %1%" - -#~ msgid "Initialize failed (No Device)!" -#~ msgstr "Inizializzazione fallita (nessun dispositivo)!" - -#~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "Inizializzazione fallita (Nessun dispositivo fotocamera)!" - -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." -#~ msgstr "" -#~ "Stampante in fase di caricamento; attendi il completamento del " -#~ "caricamento." - -#~ msgid "Initialize failed (Not supported on the current printer version)!" -#~ msgstr "" -#~ "Inizializzazione non riuscita (non supportata nella versione corrente " -#~ "della stampante)!" - -#~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "Inizializzazione fallita (non accessibile in modalità solo LAN)!" - -#~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "" -#~ "Inizializzazione fallita (indirizzo IP LAN della stampante mancante)!" +#~ "Jūsų purkštuko skersmuo nustatytame režime neatitinka įsiminto purkštuko " +#~ "skersmens. Ar neseniai keitėte purkštuką?" #, c-format, boost-format -#~ msgid "Stopped [%d]!" -#~ msgstr "Interrotto [%d]!" - -#, c-format, boost-format -#~ msgid "Load failed [%d]!" -#~ msgstr "Caricamento non riuscito [%d]!" - -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "Caricamento non riuscito [%d]" - -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Impossibile recuperare le informazioni del modello dalla stampante." - -#~ msgid "Failed to parse model infomations." -#~ msgstr "Impossibile analizzare le informazioni del modello." - -#~ msgid "Connection lost. Please retry." -#~ msgstr "Connessione persa. Si prega di riprovare." - -#~ msgid "File not exists." -#~ msgstr "Il file non esiste." - -#, boost-format -#~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "" -#~ "Sono state modificate alcune impostazioni del preset \"%1%\". \n" -#~ "Vuoi mantenere le impostazioni (nuovo valore) dopo aver cambiato i preset?" - -#~ msgid "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "" -#~ "Sono stati modificati alcuni preset preimpostati. \n" -#~ "Vuoi mantenere le impostazioni (nuovo valore) dopo aver cambiato i preset?" - -#~ msgid " ℃" -#~ msgstr " °C" - -#~ msgid "" -#~ "Please go to filament setting to edit your presets if you need.\n" -#~ "Please note that nozzle temperature, hot bed temperature, and maximum " -#~ "volumetric speed have a significant impact on printing quality. Please " -#~ "set them carefully." -#~ msgstr "" -#~ "Vai alle impostazioni del filamento per modificare le tue impostazioni " -#~ "predefinite se necessario. \n" -#~ "Nota che la temperatura della ugello, la temperatura del piano riscaldato " -#~ "e la velocità volumetrica massima hanno un impatto significativo sulla " -#~ "qualità di stampa. Impostale con attenzione." - -#~ msgid "Studio Version:" -#~ msgstr "Versione Studio:" - -#~ msgid "Test BambuLab" -#~ msgstr "Test BambuLab" - -#~ msgid "Test BambuLab:" -#~ msgstr "Test BambuLab:" - -#~ msgid "Test HTTP" -#~ msgstr "Test HTTP" - -#~ msgid "Test HTTP Service:" -#~ msgstr "Test servizio HTTP:" - -#~ msgid "Test storage" -#~ msgstr "Test Archiviazione" - -#~ msgid "Test Storage Upload:" -#~ msgstr "Test Caricamento dell'archiviazione:" - -#~ msgid "Test storage upgrade" -#~ msgstr "Test l'aggiornamento dell'archiviazione" - -#~ msgid "Test Storage Upgrade:" -#~ msgstr "Test l'aggiornamento dell'archiviazione:" - -#~ msgid "Test storage download" -#~ msgstr "Test Download dell'archiviazione " - -#~ msgid "Test Storage Download:" -#~ msgstr "Test Download dell'archiviazione:" - -#~ msgid "Test plugin download" -#~ msgstr "Test plugin download" - -#~ msgid "Test Plugin Download:" -#~ msgstr "Test Plugin Download:" - -#~ msgid "Test Storage Upload" -#~ msgstr "Test Caricamento dell'archiviazione" - -#~ msgid "" -#~ "Alternate extra wall only works with ensure vertical shell thickness " -#~ "disabled. " -#~ msgstr "" -#~ "L'opzione Parete Aggiuntiva Alternativa funziona solo con la " -#~ "disattivazione dell'opzione Garantisci spessore verticale del guscio" - -#~ msgid "" -#~ "Change these settings automatically? \n" -#~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " -#~ "wall\n" -#~ "No - Dont use alternate extra wall" -#~ msgstr "" -#~ "Modificare automaticamente queste impostazioni? \n" -#~ "Sì - Disabilita Garantisci spessore verticale del guscio e abilita Parete " -#~ "Aggiuntiva Alternativa\n" -#~ "No - Non utilizzare una Parete Aggiuntiva Alternativa" - -#~ msgid "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)" -#~ msgstr "" -#~ "Aggiunge un riempimento solido in prossimità delle superfici inclinate " -#~ "per garantire lo spessore verticale del guscio (layers solidi superiori e " -#~ "inferiori)." - -#~ msgid "Further reduce solid infill on walls (beta)" -#~ msgstr "Ridurre ulteriormente il riempimento solido sulle pareti (beta)" - -#~ msgid "" -#~ "Further reduces any solid infill applied to walls. As there will be very " -#~ "limited infill supporting solid surfaces, make sure that you are using " -#~ "adequate number of walls to support the part on sloping surfaces.\n" -#~ "\n" -#~ "For heavily sloped surfaces this option is not suitable as it will " -#~ "generate too thin of a top layer and should be disabled." -#~ msgstr "" -#~ "Riduce ulteriormente qualsiasi riempimento solido applicato alle pareti. " -#~ "Poiché le superfici solide di supporto del riempimento saranno molto " -#~ "limitate, assicurarsi di utilizzare un numero adeguato di pareti per " -#~ "sostenere la parte su superfici inclinate.\n" -#~ "\n" -#~ "Per superfici fortemente inclinate, questa opzione non è adatta in quanto " -#~ "genererebbe uno strato superiore troppo sottile e dovrebbe essere " -#~ "disabilitata." - -#~ msgid " " -#~ msgstr " " - -#~ msgid "Text-Rotate" -#~ msgstr "Ruota testo" - -#~ msgid "SVG-Rotate" -#~ msgstr "Ruota SVG" - -#~ msgid "Resize" -#~ msgstr "Ridimensiona" - -#~ msgid "Configuration package updated to " -#~ msgstr "Pacchetto di configurazione aggiornato a " +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*Spausdinant %s medžiagą su %s gali būti pažeistas purkštukas" #~ msgid "" #~ "Improve shell precision by adjusting outer wall spacing. This also " #~ "improves layer consistency." #~ msgstr "" -#~ "Migliora la precisione del guscio regolando la spaziatura delle pareti " -#~ "esterne. Questo migliora anche la consistenza degli strati." +#~ "Pagerinti korpuso tikslumą reguliuojant atstumus tarp išorinių sienelių. " +#~ "Tai taip pat pagerina sluoksnių nuoseklumą." -#~ msgid "" -#~ "The minimum printing speed for the filament when slow down for better " -#~ "layer cooling is enabled, when printing overhangs and when feature speeds " -#~ "are not specified explicitly." -#~ msgstr "" -#~ "La velocità di stampa minima per il filamento quando è abilitato il " -#~ "rallentamento per un migliore raffreddamento dello strato, quando le " -#~ "sporgenze di stampa e quando le velocità delle caratteristiche non sono " -#~ "specificate esplicitamente." +#~ msgid "Enable filament ramming." +#~ msgstr "Įjungti gijų įspaudimą" -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Nessun layer sparso (SPERIMENTALE)" +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + pelės ratukas" -#~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" -#~ msgstr "" -#~ "Rinomineremo le impostazioni predefinite come \"Tipo di fornitore seriale " -#~ "@printer selezionato\". \n" -#~ " Per aggiungere impostazioni predefinite per altre stampanti, vai alla " -#~ "selezione della stampante." +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + pelės ratukas" -#~ msgid "The Config can not be loaded." -#~ msgstr "La configurazione non può essere caricata." +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + kairys pelės mygtukas" -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "Il 3mf è stato generato da una vecchia versione di Snapmaker Orca, " -#~ "caricando \n" -#~ "solo i dati geometrici." +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" -#~ msgid "wiki" -#~ msgstr "" -#~ "Darò i comandi per far funzionare EPEL su RHEL 8, ma se sei su RHEL 6 o " -#~ "RHEL 7 puoi trovare quelle istruzioni sul wiki." +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + pelės judėjimas aukštyn arba žemyn" -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "L'estrusione relativa è consigliata quando si utilizza l'opzione " -#~ "\"label_objects\". Alcuni estrusori funzionano meglio con questa opzione " -#~ "unckecked (modalità di estrusione assoluta). La torre di pulizia è " -#~ "compatibile solo con la modalità relativa. È sempre abilitato sulle " -#~ "stampanti BambuLab. Il valore predefinito è selezionato" +#~ msgid "Left mouse button:" +#~ msgstr "Kairysis pelės mygtukas:" -#~ msgid "Movement:" -#~ msgstr "Movement:" +#~ msgid "Right mouse button:" +#~ msgstr "Dešinysis pelės mygtukas:" -#~ msgid "Movement" -#~ msgstr "Movimento" +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + kairysis pelės mygtukas:" -#~ msgid "Auto Segment" -#~ msgstr "Segmento automatico" +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + dešinysis pelės mygtukas:" -#~ msgid "Depth ratio" -#~ msgstr "Rapporto di profondità" +#~ msgid "Recent projects" +#~ msgstr "Naujausi projektai" -#~ msgid "Prizm" -#~ msgstr "Prizm" +#~ msgid "Maximum recent projects" +#~ msgstr "Daugiausia buvusių projektų" -#~ msgid "connector is out of cut contour" -#~ msgstr "Connettore fuori dal contorno" +#~ msgid "Maximum count of recent projects" +#~ msgstr "Didžiausias skaičius buvusių projektų" -#~ msgid "connectors are out of cut contour" -#~ msgstr "Connettori fuori dal contorno" +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" -#~ msgid "connector is out of object" -#~ msgstr "Connettore fuori dall'oggetto" +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" -#~ msgid "connectors is out of object" -#~ msgstr "I connettori devono trovarsi sulla superficie dell'oggetto." +#~ msgid "Shift+A" +#~ msgstr "Shift+A" -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "Stato non valido.\n" -#~ "Non è stata selezionata alcuna parte da conservare dopo il taglio" +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" -#~ msgid "Recalculate" -#~ msgstr "Ricalcola" +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Bet kokia rodyklė" -#~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " -#~ "change. You can change this behavior in Preferences." -#~ msgstr "" -#~ "Orca ricalcola i volumi di risciacquo ogni volta che i colori del " -#~ "filamento cambiano. È possibile modificare questo comportamento in " -#~ "Preferenze." +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+ kairysis pelės mygtukas" -#~ msgid "" -#~ "The printer timed out while receiving a print job. Please check if the " -#~ "network is functioning properly and send the print again." -#~ msgstr "" -#~ "La stampante ha raggiunto il timeout durante la ricezione di un lavoro di " -#~ "stampa. Controlla se la rete funziona correttamente e invia nuovamente la " -#~ "stampa." +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+ kairysis pelės mygtukas" -#~ msgid "The beginning of the vendor can not be a number. Please re-enter." -#~ msgstr "" -#~ "L'inizio del fornitore non può essere un numero. Si prega di inserire di " -#~ "nuovo." +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl + bet kokia rodyklė" -#~ msgid "Edit Text" -#~ msgstr "Modifica testo" +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt + kairysis pelės mygtukas" -#~ msgid "Error! Unable to create thread!" -#~ msgstr "Errore. Impossibile creare il processo." +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl + kairysis pelės mygtukas" -#~ msgid "Exception" -#~ msgstr "Eccezione" +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift + kairysis pelės mygtukas" -#~ msgid "Choose SLA archive:" -#~ msgstr "Seleziona l'archivio SLA:" +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift + bet kuri rodyklė" -#~ msgid "Import file" -#~ msgstr "Importa file" +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Pelės ratukas" -#~ msgid "Import model and profile" -#~ msgstr "Importa modello e profilo" +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Pelės ratukas" -#~ msgid "Import profile only" -#~ msgstr "Importa solo profilo" +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl + pelės ratukas" -#~ msgid "Import model only" -#~ msgstr "Importa solo modello" +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt + pelės ratukas" -#~ msgid "Accurate" -#~ msgstr "Accurato" +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift + pelės ratukas" -#~ msgid "Balanced" -#~ msgstr "Bilanciato" +#~ msgid "Set Position" +#~ msgstr "Nustatyti padėtį" -#~ msgid "Quick" -#~ msgstr "Rapido" - -#~ msgid "Print sequence of inner wall and outer wall. " -#~ msgstr "Stampa la sequenza della parete interna e della parete esterna. " - -#~ msgid "Order of wall/infill. false means print wall first. " -#~ msgstr "" -#~ "L'ordine tra parete (wall) e riempimento (infill). \"False\" significa " -#~ "stampare prima la parete." - -#~ msgid "" -#~ "Discribe how long the nozzle will move along the last path when retracting" -#~ msgstr "" -#~ "Descrive per quanto tempo il nozzle si muoverà lungo l'ultimo percorso " -#~ "mentre si ritrae." - -#~ msgid "" -#~ "Simplify Model\n" -#~ "Did you know that you can reduce the number of triangles in a mesh using " -#~ "the Simplify mesh feature? Right-click the model and select Simplify " -#~ "model. Read more in the documentation." -#~ msgstr "" -#~ "Semplifica Modello\n" -#~ "Sapevate che è possibile ridurre il numero di triangoli in una mesh " -#~ "utilizzando la funzione Semplifica mesh? Fare clic con il tasto destro " -#~ "del mouse sul modello e selezionare Semplifica modello. Per saperne di " -#~ "più, consultare la documentazione." - -#~ msgid "" -#~ "Subtract a Part\n" -#~ "Did you know that you can subtract one mesh from another using the " -#~ "Negative part modifier? That way you can, for example, create easily " -#~ "resizable holes directly in Snapmaker Orca. Read more in the documentation." -#~ msgstr "" -#~ "Sottrazione di una parte\n" -#~ "Sapevi che puoi sottrarre una mesh da un'altra usando il modificatore " -#~ "Parte negativa? In questo modo è possibile, ad esempio, creare fori " -#~ "facilmente ridimensionabili direttamente in Snapmaker Orca. Per ulteriori " -#~ "informazioni, consulta la documentazione." - -#~ msgid "Filling bed " -#~ msgstr "Riempi piano" +#~ msgid "%" +#~ msgstr "%" #, boost-format -#~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "La trama riempimento %1% non supporta il 100%% di densità." +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Warning: please select two different mesh." +#~ msgstr "Įspėjimas: pasirinkite dvi skirtingas figūras." + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Paspauskite dešnįjį pelės mygtuką modelio objekto taisymui" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "Tikslinį objektą sudaro tik viena dalis, todėl jo skaidyti negalima." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" #~ msgid "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - switch to rectilinear pattern automaticlly\n" -#~ "No - reset density to default non 100% value automaticlly" +#~ "The AMS will automatically read the information of inserted filament on " +#~ "start-up. It will take about 1 minute. The reading process will roll " +#~ "filament spools." #~ msgstr "" -#~ "Passare alla trama rettilinea?\n" -#~ "Sì - passa automaticamente alla trama rettilinea\n" -#~ "No - ripristina automaticamente la densità al valore predefinito non 100%" +#~ "Paleidimo metu AMS automatiškai nuskaitys įdėtos gijos informaciją. Tai " +#~ "truks apie 1 minutę. Skaitymo proceso metu AMS sukios gijų rites." -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." #~ msgstr "" -#~ "Riscaldare il nozzle a una temperatura superiore a 170 gradi prima di " -#~ "caricare il filamento." +#~ "Į ekstruderį įkelta žemai temperatūrai skirta gija (PLA/PETG/TPU). Norint " +#~ "išvengti ekstruderio užsikimšimo, kameros temperatūros negalima nustatyti " +#~ "aukštesnės nei 45 ℃." -#~ msgid "Show g-code window" -#~ msgstr "Mostra la finestra del codice g" +#~ msgid "Color Scheme" +#~ msgstr "Spalvų schema" -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "Se abilitato, verrà visualizzata la finestra del codice g." +#~ msgid "Percent" +#~ msgstr "Procentai" + +#~ msgid "Used filament" +#~ msgstr "Naudota gija" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Daugiau..." + +#~ msgid "More calibrations" +#~ msgstr "Daugiau kalibravimų" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SD kortelė" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Nėra SD kortelės" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD kortelė netinkama" + +#~ msgid "" +#~ "Cannot read filament info: the filament is loaded to the tool head, " +#~ "please unload the filament and try again." +#~ msgstr "" +#~ "Neįmanoma nuskaityti gijos informacijos: gija įtraukta į galvutę. Prašome " +#~ "išstumti giją ir pabandyti dar kartą." + +#~ msgid "InFo" +#~ msgstr "Informacija" + +#~ msgid "Your model needs support! Please make support material enable." +#~ msgstr "Jūsų modeliui reikia atramų! Prašome įjungti atramų medžiagą." + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Nepavyko išstumti įrenginio %s(%s)." + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Šią parinktį galima pakeisti vėliau nustatymuose, skiltyje „Įkelti " +#~ "elgseną“." + +#~ msgid "Invalid number" +#~ msgstr "Netinkamas skaičius" + +#~ msgid "Switch cloud environment, please login again!" +#~ msgstr "Perjungiama debesies aplinka, prašome prisijungti iš naujo!" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "purkštukas įsimintas: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Pagrindo temperatūra, kai sumontuota šalta plokštė. Reikšmė 0 reiškia, " +#~ "kad gija nepalaiko spausdinimo ant šaltos plokštės" + +#~ msgid "" +#~ "Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +#~ "installed. A value of 0 means the filament does not support printing on " +#~ "the Smooth PEI Plate/High Temp Plate.High Temp Plate" +#~ msgstr "" +#~ "Pagrindo temperatūra, kai sumontuota lygi PEI plokštė / aukštos " +#~ "temperatūros plokštė. Reikšmė 0 reiškia, kad gija nepalaiko spausdinimo " +#~ "ant lygios PEI plokštės / aukštos temperatūros plokštės" + +#~ msgid "Ramming settings" +#~ msgstr "Spausdinimo galvutės stūmimo nustatymai" + +#~ msgid "Profile dependencies" +#~ msgstr "Profilio priklausomybės" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "Konfigūracijos paketas nesuderinamas su dabartine programos versija." + +#~ msgid "Total ramming time" +#~ msgstr "Bendras įspaudimo laikas" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Bendras įspaudimo tūris" + +#~ msgid "Ramming line width" +#~ msgstr "Įspaudimo linijos plotis" + +#~ msgid "Ramming line spacing" +#~ msgstr "Įspaudimo tarpai tarp linijų" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "tęsti" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Klasikinis režimas" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Įjunkite šią parinktį, jei norite naudoti klasikinį režimą" + +#~ msgid "Compatible machine" +#~ msgstr "Suderinamas įrenginys" + +#~ msgid "Compatible machine condition" +#~ msgstr "Suderinamo įrenginio būklė" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Suderinamų procesų profilių būklė" + +#~ msgid "" +#~ "Insert G-code between objects. This parameter will only come into effect " +#~ "when you print your models object by object" +#~ msgstr "" +#~ "G-kodas įterpiamas tarp objektų. Šis parametras bus taikomas tik tada, " +#~ "kai spausdinsite modelius objektas po objekto" + +#~ msgid "" +#~ "The material may have volumetric change after switching between molten " +#~ "state and crystalline state. This setting changes all extrusion flow of " +#~ "this filament in G-code proportionally. Recommended value range is " +#~ "between 0.95 and 1.05. Maybe you can tune this value to get nice flat " +#~ "surface when there has slight overflow or underflow" +#~ msgstr "" +#~ "Medžiagos tūris gali pasikeisti perėjus iš išlydytos į kristalinę būseną. " +#~ "Šis nustatymas proporcingai pakeičia visą šios gijos ekstruzijos srautą G " +#~ "kode. Rekomenduojamas verčių intervalas yra nuo 0,95 iki 1,05. Jei yra " +#~ "nedidelis perteklius arba nepakankamas srautas, šią reikšmę galite " +#~ "sureguliuoti, kad gautumėte gražų plokščią paviršių" + +#~ msgid "" +#~ "The material may have volumetric change after switching between molten " +#~ "state and crystalline state. This setting changes all extrusion flow of " +#~ "this filament in G-code proportionally. Recommended value range is " +#~ "between 0.95 and 1.05. Maybe you can tune this value to get nice flat " +#~ "surface when there has slight overflow or underflow.\n" +#~ "\n" +#~ "The final object flow ratio is this value multiplied by the filament flow " +#~ "ratio." +#~ msgstr "" +#~ "Perėjus iš išlydytos būsenos į kristalinę, medžiagos tūris gali " +#~ "pasikeisti. Šis nustatymas proporcingai pakeičia visą šios gijos " +#~ "ekstruzijos srautą gkode. Rekomenduojamas verčių intervalas yra nuo 0,95 " +#~ "iki 1,05. Galbūt galite sureguliuoti šią vertę, kad gautumėte gražų " +#~ "plokščią paviršių, kai yra nedidelis perteklius arba nepakankamas " +#~ "perteklius.\n" +#~ "\n" +#~ "Galutinis objekto srauto santykis yra ši vertė padauginta iš gijos srauto " +#~ "santykio." + +#~ msgid "Default filament color" +#~ msgstr "Numatytoji gijos spalva" + +#~ msgid "" +#~ "Filament diameter is used to calculate extrusion in G-code, so it's " +#~ "important and should be accurate" +#~ msgstr "" +#~ "Gijos skersmuo naudojamas ekstruzijos kintamiesiems G-kodo apskaičiuoti, " +#~ "todėl svarbu, kad jis būtų tikslus" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Pasukti vientiso užpildo kryptį" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Pasukti vientiso užpildo kryptį 90° kampu kiekvienam sluoksniui." + +#~ msgid "" +#~ "Enable this to add line number(Nx) at the beginning of each G-code line" +#~ msgstr "" +#~ "Įjunkite šią funkciją, kad kiekvienos G-kodo eilutės pradžioje būtų " +#~ "pridėtas eilutės numeris (Nx)" + +#~ msgid "What kind of G-code the printer is compatible with" +#~ msgstr "Su kokiu gkodu suderinamas spausdintuvas" + +#~ msgid "Enable this option to add EXCLUDE OBJECT command in G-code" +#~ msgstr "" +#~ "Įjunkite šią parinktį, jei norite į G-kodą įtraukti komandą EXCLUDE OBJECT" + +#~ msgid "This G-code part is inserted at every layer change after lift z" +#~ msgstr "" +#~ "Šis G-kodas įterpiamas kiekvieną kartą keičiant sluoksnį po z pakėlimo" + +#~ msgid "" +#~ "This G-code will be used as a code for the pause print. User can insert " +#~ "pause G-code in G-code viewer" +#~ msgstr "" +#~ "Šis G-kodas bus naudojamas kaip pauzės spausdinimo kodas. Vartotojai gali " +#~ "įterpti pauzės G-kodą G-kodo peržiūros programoje" + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Srauto kompensavimo modelis, naudojamas srautui sureguliuoti mažuose " +#~ "užpildymo plotuose. Modelis išreiškiamas kaip kableliais atskirta " +#~ "ekstruzijos ilgio ir srauto korekcijos koeficientų verčių pora, po vieną " +#~ "kiekvienoje eilutėje, tokiu formatu: \"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Didžiausias ekstruderio spausdinamo sluoksnio aukštis: jis naudojamas " +#~ "didžiausiam sluoksnio aukščiui apriboti, kai įjungtas prisitaikantis " +#~ "sluoksnio aukštis" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "A lower value results in smoother extrusion rate transitions. However, " +#~ "this results in a significantly larger G-code file and more instructions " +#~ "for the printer to process.\n" +#~ "\n" +#~ "Default value of 3 works well for most cases. If your printer is " +#~ "stuttering, increase this value to reduce the number of adjustments made\n" +#~ "\n" +#~ "Allowed values: 0.5-5" +#~ msgstr "" +#~ "Esant mažesnei vertei, išspaudimo greičio pokyčiai būna sklandesni. " +#~ "Tačiau dėl to gaunamas gerokai didesnis gkodo failas ir spausdintuvui " +#~ "tenka apdoroti daugiau instrukcijų.\n" +#~ "\n" +#~ "Numatytoji reikšmė 3 tinka daugeliu atvejų. Jei spausdintuvas stringa, " +#~ "padidinkite šią vertę, kad sumažintumėte atliekamų koregavimų skaičių.\n" +#~ "\n" +#~ "Leidžiamos reikšmės: 0.5-5" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Mažiausias ekstruderio spausdinamo sluoksnio aukštis. Jis naudojamas " +#~ "mažiausiam sluoksnio aukščiui apriboti, kai įjungtas prisitaikantis " +#~ "sluoksnio aukštis" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "G-code path is generated after simplifying the contour of model to avoid " +#~ "too much points and G-code lines in G-code file. Smaller value means " +#~ "higher resolution and more time to slice" +#~ msgstr "" +#~ "G-kodo kelias generuojamas supaprastinus modelio kontūrą, kad gkodo faile " +#~ "nebūtų per daug taškų ir gkodo linijų. Mažesnė reikšmė reiškia didesnę " +#~ "skiriamąją gebą ir ilgesnį sluoksniavimo laiką" + +#~ msgid "Retract on top layer" +#~ msgstr "Įtraukti viršutiniame sluoksnyje" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Naudoti priverstinį įtraukimą viršutiname sluoksnyje. Išjungimas gali " +#~ "padėti išvengti užsikimšimo labai lėtuose modeliuose su mažais judesiais, " +#~ "pvz., Hilberto kreivėje." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Tai gijos kiekis, kuris yra įtraukiamas į ekstruderį, kad būtų išvengta " +#~ "išsiliejimo per ilgą judėjimo atstumą. Nustatykite 0, kad įtraukimas būtų " +#~ "išjungtas" + +#~ msgid "" +#~ "Z-hop will only come into effect when Z is above this value and is below " +#~ "the parameter: \"Z-hop upper boundary\"" +#~ msgstr "" +#~ "Z šuolis pradės veikti tik tada, kai Z bus didesnis už šią vertę ir " +#~ "mažesnis už parametrą: \"Z šuolio viršutinė riba\"" + +#~ msgid "" +#~ "If this value is positive, Z-hop will only come into effect when Z is " +#~ "above the parameter: \"Z-hop lower boundary\" and is below this value" +#~ msgstr "" +#~ "Jei ši reikšmė yra teigiama, Z apyvarta pradės veikti tik tada, kai Z bus " +#~ "didesnė už parametrą: \"Z šuolio apatinė riba\" ir yra mažesnė už šią " +#~ "reikšmę" + +#~ msgid "" +#~ "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° " +#~ "results in Normal Lift" +#~ msgstr "" +#~ "Šlaito ir spiralinio Z šuolio tipo judėjimo kampas. Nustačius 90°, " +#~ "naudojamas normalus pakėlimas" + +#~ msgid "Speed of retractions." +#~ msgstr "Įtraukimo greitis" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Gijos įkėlimo į ekstruderį greitis po įtraukimo; nustačius 0, greitis bus " +#~ "toks pat kaip ir įtraukimo" + +#~ msgid "" +#~ "Disable generating of the M73: Set remaining print time in the final G-" +#~ "code" +#~ msgstr "" +#~ "Išjungti M73 generavimą: Nustatyti likusį spausdinimo laiką galutiniame " +#~ "gkode" + +#~ msgid "Single loop draft shield" +#~ msgstr "Vieno sluoksnio apsauginis kokonas" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Apriboja apsauginio ekrano kontūrą viena siena po pirmojo sluoksnio. " +#~ "Kartais tai naudinga siekiant taupyti giją, tačiau dėl to apsauginis " +#~ "ekranas gali deformuotis / įtrūkti." + +#~ msgid "" +#~ "The printing speed in exported G-code will be slowed down, when the " +#~ "estimated layer time is shorter than this value, to get better cooling " +#~ "for these layers" +#~ msgstr "" +#~ "Spausdinimo greitis eksportuotame G-kode bus sulėtintas, kai numatomas " +#~ "sluoksnio laikas bus trumpesnis už šią vertę, tam, kad šie sluoksniai " +#~ "būtų geriau aušinami" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Atstumas tarp sąsajos linijų. 0 reiškia vientisą sąsają" + +#~ msgid "" +#~ "This G-code is inserted when change filament, including T command to " +#~ "trigger tool change" +#~ msgstr "" +#~ "Šis gkodas įterpiamas, kai keičiama gija, įskaitant komandą T įrankiui " +#~ "pakeisti" + +#~ msgid "This G-code is inserted when the extrusion role is changed" +#~ msgstr "Šis gkodas įterpiamas, kai pakeičiamas išspaudimo vaidmuo" + +#~ msgid "" +#~ "This object will be used to purge the nozzle after a filament change to " +#~ "save filament and decrease the print time. Colors of the objects will be " +#~ "mixed as a result. It will not take effect, unless the prime tower is " +#~ "enabled." +#~ msgstr "" +#~ "Šis objektas bus naudojamas purkštukui išvalyti po gijos pakeitimo, kad " +#~ "būtų sutaupyta gija ir sutrumpintas spausdinimo laikas. Dėl to objektų " +#~ "spalvos bus sumaišytos. Jis neveiks, jei nebus įjungtas pirminis bokštas." + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Mažiausias plonų elementų storis. Modelio elementai, kurie yra plonesni " +#~ "už šią vertę, nebus spausdinami, o elementai, kurie yra storesni už " +#~ "minimalų elemento dydį, bus praplatinti iki minimalaus sienelės pločio. " +#~ "Jis išreiškiamas procentais nuo purkštuko skersmens" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "įkelti \"naujausio\" proceso / mašinos nustatymus naudojant \"naujausia\"" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "įkelti naujausius gijų nustatymus, kai naudojate \"naujausius“" + +#~ msgid "Downward machines settings" +#~ msgstr "mašinų nustatymai žemyn" + +#~ msgid "Load custom G-code from json" +#~ msgstr "Įkelti pasirinktinį G-kodą iš json" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Įkelti kiekvieno objekto gijų ID" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Dabar pridėjome automatinį kalibravimą skirtingoms gijoms, kuris yra " +#~ "visiškai automatizuotas, o rezultatas bus išsaugotas spausdintuve ir " +#~ "naudojamas ateityje. Kalibravimą reikia atlikti tik šiais ribotais " +#~ "atvejais:\n" +#~ "1. Jei įdedate naują skirtingų gamintojų ir (arba) modelių giją arba gija " +#~ "yra drėgna;\n" +#~ "2. Jei antgalis nusidėvi arba pakeičiamas nauju;\n" +#~ "3. Jei gijos nustatymuose keičiamas didžiausias tūrinis greitis arba " +#~ "spausdinimo temperatūra." + +#~ msgid "step: " +#~ msgstr "žingsnis " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Įkelti STL" + +#~ msgid "Load svg" +#~ msgstr "Įkelti scg" + +#~ msgid "Back Page 1" +#~ msgstr "Atgal Puslapis 1" + +#~ msgid "Delete Filament" +#~ msgstr "Ištrinti giją" + +#~ msgid "Refresh Printers" +#~ msgstr "Atnaujinti spausdintuvus" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis " +#~ "yra mažesnis, todėl beveik nematomos sluoksnio linijos, aukštesnė " +#~ "spausdinimo kokybė ir trumpesnis spausdinimo laikas." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer lines, lower speeds and acceleration, and the sparse infill pattern " +#~ "is Gyroid. This results in almost invisible layer lines and much higher " +#~ "printing quality, but much longer print time." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jame yra mažesnės " +#~ "sluoksnio linijos, mažesnis greitis ir pagreitis, o retas užpildymo " +#~ "raštas yra \"Gyroid\". Taigi, dėl to beveik nematomos sluoksnių linijos " +#~ "ir daug geresnė spausdinimo kokybė, tačiau daug ilgesnis spausdinimo " +#~ "laikas." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jis turi mažesnį " +#~ "sluoksnio aukštį, todėl yra minimalios sluoksnio linijos ir aukštesnė " +#~ "spausdinimo kokybė, tačiau trumpesnis spausdinimo laikas." + +#~ msgid "" +#~ "It has a normal layer height. This results in average layer lines and " +#~ "printing quality. It is suitable for most general printing cases." +#~ msgstr "" +#~ "Jis turi įprastą sluoksnio aukštį ir lemia įprastas sluoksnio linijas bei " +#~ "spausdinimo kokybę. Jis tinka daugeliui bendrųjų spausdinimo atvejų." + +#~ msgid "" +#~ "Compared with the default profile of a 0.4 mm nozzle, it has a smaller " +#~ "layer height, lower speeds and acceleration, and the sparse infill " +#~ "pattern is Gyroid. This results in almost negligible layer lines and much " +#~ "higher printing quality, but much longer print time." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis " +#~ "mažesnis, greitis ir pagreitis mažesni, o retas užpildymo raštas yra " +#~ "\"Gyroid\". Taigi, dėl jo gaunamos beveik nereikšmingos sluoksnių linijos " +#~ "ir daug geresnė spausdinimo kokybė, tačiau daug ilgesnė spausdinimo " +#~ "trukmė." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low printing quality and general printing time." +#~ msgstr "" +#~ "Jis turi labai didelį sluoksnio aukštį, todėl labai matomos sluoksnio " +#~ "linijos, prasta spausdinimo kokybė ir įprasta spausdinimo trukmė." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,8 mm antgalio profiliu, jo sluoksnio aukštis " +#~ "yra didesnis, todėl sluoksnio linijos yra labai ryškios, o spausdinimo " +#~ "kokybė daug prastesnė, tačiau kai kuriais spausdinimo atvejais sutrumpėja " +#~ "spausdinimo laikas." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower printing quality, but much shorter printing time in some cases." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,8 mm antgalio profiliu, jo sluoksnio aukštis " +#~ "yra daug didesnis, todėl sluoksnio linijos yra labai ryškios, o " +#~ "spausdinimo kokybė daug prastesnė, tačiau kai kuriais spausdinimo " +#~ "atvejais spausdinimas trunka daug trumpiau." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "Palyginti su numatytuoju 0,8 mm antgalio profiliu, jo sluoksnio aukštis " +#~ "yra mažesnis, todėl gaunama mažiau, bet vis tiek matomų sluoksnio linijų " +#~ "ir šiek tiek geresnė spausdinimo kokybė, tačiau kai kuriais spausdinimo " +#~ "atvejais ilgesnis spausdinimo laikas." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Ryšys su \"Flashforge\" veikia tinkamai." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Nepavyko prisijungti prie \"Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Nustatykite krašto tipą „pieštas“" + +#~ msgid "" +#~ "How to use keyboard shortcuts\n" +#~ "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts " +#~ "and 3D scene operations." +#~ msgstr "" +#~ "Kaip naudoti sparčiuosius klavišus\n" +#~ "Ar žinojote, kad \"Snapmaker Orca\" siūlo daugybę klaviatūros sparčiųjų " +#~ "klavišų ir 3D scenos operacijų." + +#~ msgid "" +#~ "Auto-Arrange\n" +#~ "Did you know that you can auto-arrange all objects in your project?" +#~ msgstr "" +#~ "Automatinis išdėstymas\n" +#~ "Ar žinojote, kad galite automatiškai išdėstyti visus projekto objektus?" + +#~ msgid "" +#~ "Auto-Orient\n" +#~ "Did you know that you can rotate objects to an optimal orientation for " +#~ "printing by a simple click?" +#~ msgstr "" +#~ "Automatinis orientavimas\n" +#~ "Ar žinojote, kad objektus galima pasukti į optimalią spausdinimo " +#~ "orientaciją vienu spustelėjimu?" + +#~ msgid "" +#~ "Set parameters for multiple objects\n" +#~ "Did you know that you can set slicing parameters for all selected objects " +#~ "at one time?" +#~ msgstr "" +#~ "Kelių objektų parametrų nustatymas\n" +#~ "Ar žinojote, kad sluoksniavimo parametrus vienu metu galite nustatyti " +#~ "visiems pasirinktiems objektams?" + +#~ msgid "" +#~ "Flush into support/objects/infill\n" +#~ "Did you know that you can save the wasted filament by flushing them into " +#~ "support/objects/infill during filament change?" +#~ msgstr "" +#~ "Išleisti į atramas/objektus/užpildymą\n" +#~ "Ar žinojote, kad keičiant gijas galima sutaupyti išeikvotų gijų, jas " +#~ "nuleidžiant į atramas/objektus/užpildymą?" + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Shift + kairys pelės mygtukas" + +#~ msgid "Unselect" +#~ msgstr "Išjungti pasirinkimą" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Mastelis" + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Prisijungti nepavyko [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Inicijavimas nepavyko (Įrenginio ryšys neparuoštas)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "Inicijavimas nepavyko (Saugykla neprieinama, įdėkite SD kortelę!)" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Inicijavimas nepavyko (%s)!" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Pridėjome eksperimentinį atraminės struktūros stilių pavadinimu \"Tree " +#~ "Slim\". Šis stilius pasižymi mažesniu atraminio taškelio tūriu, tačiau " +#~ "turi mažesnį tvirtumą.\n" +#~ "Rekomenduojame jį naudoti su šiais parametrais: 0 sąsajos sluoksnių, 0 " +#~ "viršutinio atstumo, 2 sienelės." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Rekomenduojami nustatymai \"Tree Strong\" ir \"Tree Hybrid\" atraminėms " +#~ "struktūroms: Mažiausiai 2 sąsajos sluoksniai, mažiausiai 0,1 mm " +#~ "viršutinis z atstumas arba naudojamos atraminės medžiagos sąsajoje." + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Priverstinis Z pakėlimas" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN ryšys nepavyko (spausdinimo failo siuntimas)" + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "3 veiksmas: Ping IP adresą, kad patikrintumėte paketų praradimą ir " +#~ "vėlavimą." + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Įjunkite šią parinktį, kad optimizuotumėte dalies aušinimo " +#~ "ventiliatoriaus greitį iškyšai ir tilteliui ir užtikrintumėte geresnį " +#~ "aušinimą" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Ventiliatoriaus greitis dėl iškyšos" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Spausdindami tiltus arba iškyšas, kurių iškyšos laipsnis didelis, " +#~ "priverstinai nustatykite tokį aušinimo ventiliatoriaus greitį. " +#~ "Priverstinai aušinant iškyšas ir tiltus galima užtikrinti geresnę šių " +#~ "dalių kokybę" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Iškyšos aušinimo riba" #, c-format -#~ msgid "Density of internal sparse infill, 100% means solid throughout" +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" #~ msgstr "" -#~ "Questa è la densità del riempimento interno. 100%% significa che " -#~ "l'oggetto sarà in ogni sua parte." +#~ "Priversti aušinimo ventiliatorių veikti tam tikru greičiu, kai " +#~ "atspausdintos dalies iškyšos laipsnis viršija šią vertę. Išreiškiama " +#~ "procentais, kurie rodo, kokio pločio linija be apatinio sluoksnio " +#~ "atramos. 0% reiškia, kad aušinti priverčiama visą išorinę sienelę, " +#~ "nesvarbu, koks yra iškyšos laipsnis." -#~ msgid "Tree support wall loops" -#~ msgstr "Loop parete supporto ad albero" +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Išorinių tiltų tankis. 100 % reiškia vientisą tiltą. Numatytoji reikšmė " +#~ "yra 100 %." -#~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "Questa specifica il numero di pareti attorno al supporto ad albero." +#~ msgid "Thick bridges" +#~ msgstr "Stori tiltai" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z šuolis, kai įtraukiama" + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Šakos skersmuo su dvigubomis sienelėmis" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Šakos, kurių plotas didesnis nei šio skersmens apskritimo plotas, bus " +#~ "atspausdintos su dvigubomis sienelėmis dėl stabilumo. Nustatykite šią " +#~ "vertę lygią nuliui, kad nebūtų dvigubų sienelių." #, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " Non funziona con una densità del 100%%" +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Atramos: generuoti įrankių trajektoriją sluoksnyje %d" -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Invio" +#~ msgid "Support: detect overhangs" +#~ msgstr "Atramos: aptikti iškyšas" -#~ msgid "Tool-Lay on Face" -#~ msgstr "Strumento-Faccia sul piatto" +#~ msgid "Support: propagate branches" +#~ msgstr "Atramos: skleisti šakas" -#~ msgid "Export as STL" -#~ msgstr "Esporta come STL" +#~ msgid "Support: draw polygons" +#~ msgstr "Atramos: piešti daugiakampius" -#~ msgid "Check cloud service status" -#~ msgstr "Verifica lo stato del servizio cloud" - -#~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "Inserisci un valore valido (K in 0~0.5)" - -#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" -#~ msgstr "Inserisci un valore valido (K in 0~0.5, N in 0.6~2.0)" - -#~ msgid "Export all objects as STL" -#~ msgstr "Esporta tutti gli oggetti come STL" - -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "Il 3mf non è compatibile, carica solo i dati della geometria!" - -#~ msgid "Incompatible 3mf" -#~ msgstr "Incompatible 3mf" - -#~ msgid "Add/Remove printers" -#~ msgstr "Aggiungi/Rimuovi stampanti" - -#~ msgid "" -#~ "When print by object, machines with I3 structure will not generate " -#~ "timelapse videos." -#~ msgstr "" -#~ "Quando si stampa per oggetto, le macchine con struttura I3 non " -#~ "genereranno video timelapse." +#~ msgid "Support: generate toolpath" +#~ msgstr "Atramos: generuoti įrankių trajektoriją" #, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s non è supportato da AMS." - -#~ msgid "Don't remind me of this version again" -#~ msgstr "Non ricordarmi più questa versione." - -#~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "Errore: l'IP o il codice di accesso non sono corretti" - -#~ msgid "" -#~ "Extrude perimeters that have a part over an overhang in the reverse " -#~ "direction on odd layers. This alternating pattern can drastically improve " -#~ "steep overhang." -#~ msgstr "" -#~ "Estrudere i perimetri che hanno una parte su una sporgenza nella " -#~ "direzione inversa su layer dispari. Questo schema alternato può " -#~ "migliorare drasticamente lo strapiombo ripido." - -#~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "Ordine di parete interna/esterna/riempimento" - -#~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "" -#~ "È la sequenza di stampa di pareti interne, pareti esterne e dei " -#~ "riempimenti." - -#~ msgid "inner/outer/infill" -#~ msgstr "interno/esterno/riempimento" - -#~ msgid "outer/inner/infill" -#~ msgstr "esterno/interno/riempimento" - -#~ msgid "infill/inner/outer" -#~ msgstr "riempimento/interno/esterno" - -#~ msgid "infill/outer/inner" -#~ msgstr "riempimento/esterno/interno" - -#~ msgid "inner-outer-inner/infill" -#~ msgstr "interno-esterno-interno/riempimento" +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Atramos: generuoti daugiakampius sluoksnyje %d" #, c-format, boost-format -#~ msgid "%%" -#~ msgstr "%%" - -#~ msgid "Export 3MF" -#~ msgstr "Esporta 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Questo esporta il progetto come file 3mf." - -#~ msgid "Export slicing data" -#~ msgstr "Esporta dati elaborati" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Esporta dati elaborati in una cartella" - -#~ msgid "Load slicing data" -#~ msgstr "Carica dati di slicing" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Carica i dati di slicing nella cache dalla directory" - -#~ msgid "Export STL" -#~ msgstr "Esporta STL" - -#~ msgid "Export the objects as multiple STL." -#~ msgstr "Esportare gli oggetti come STL multipli." - -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Slicing dei piatti: 0-tutti i piatti, i-piatto i, altri-invalidi" - -#~ msgid "Show command help." -#~ msgstr "Mostra la guida ai comandi." - -#~ msgid "UpToDate" -#~ msgstr "Aggiornato" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Aggiorna valori di configurazione dei 3mf ai più recenti." - -#~ msgid "Load default filaments" -#~ msgstr "Carica filamenti predefiniti" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Carica il primo filamento come predefinito per quelli non caricati" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "numero massimo di triangoli per piatto da elaborare" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "Tempo massimo di slicing per piatto in secondi" - -#~ msgid "Normative check" -#~ msgstr "Controllo normativo" - -#~ msgid "Check the normative items." -#~ msgstr "Controlla gli articoli normativi." - -#~ msgid "Output Model Info" -#~ msgstr "Info Modello di output" - -#~ msgid "Output the model's information." -#~ msgstr "Questo produce le informazioni del modello." - -#~ msgid "Export Settings" -#~ msgstr "Esporta impostazioni" - -#~ msgid "Export settings to a file." -#~ msgstr "Questo esporta le impostazioni in un file." - -#~ msgid "Send progress to pipe" -#~ msgstr "Inviare l'avanzamento al pipe" - -#~ msgid "Send progress to pipe." -#~ msgstr "Inviare l'avanzamento al pipe" - -#~ msgid "Arrange Options" -#~ msgstr "Opzioni disposizione" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Opzioni di disposizione: 0-disabilita, 1-abilita, altro-auto" - -#~ msgid "Repetions count" -#~ msgstr "Conteggio delle ripetizioni" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Numero di ripetizioni dell'intero modello" - -#~ msgid "Convert Unit" -#~ msgstr "Converti unità" - -#~ msgid "Convert the units of model" -#~ msgstr "Converti le unità del modello" - -#~ msgid "Rotate around X" -#~ msgstr "Ruota attorno ad X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "Angolo di rotazione attorno all'asse X in gradi." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Ridimensiona il modello in base a un fattore float" - -#~ msgid "Load General Settings" -#~ msgstr "Carica impostazioni generali" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Carica le impostazioni di processo/macchina dal file specificato" - -#~ msgid "Load Filament Settings" -#~ msgstr "Carica impostazioni filamento" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "" -#~ "Carica le impostazioni del filamento dall'elenco di file specificato" - -#~ msgid "Skip Objects" -#~ msgstr "Salta oggetti" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Salta alcuni oggetti in questa stampa" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "" -#~ "Caricare le impostazioni di processo/macchina aggiornate quando si " -#~ "utilizza UptoDate" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "Caricare le impostazioni di processo/macchina aggiornate dal file " -#~ "specificato quando si utilizza UptoDate" - -#~ msgid "Output directory" -#~ msgstr "Output directory" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Questa è la cartella di destinazione per i file esportati." - -#~ msgid "Debug level" -#~ msgstr "Livello di debug" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" - -#, boost-format -#~ msgid "The selected preset: %1% is not found." -#~ msgstr "Il preset selezionato: %1% non è stato trovato." - -#~ msgid "" -#~ "3D Scene Operations\n" -#~ "Did you know how to control view and object/part selection with mouse and " -#~ "touchpanel in the 3D scene?" -#~ msgstr "" -#~ "Operazioni sulla scena 3D\n" -#~ "Sapete come controllare la vista e la selezione di oggetti/parti con il " -#~ "mouse e il touch panel nella scena 3D?" - -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Correggi Modello\n" -#~ "Sapevi che puoi correggere un modello 3D danneggiato per evitare molti " -#~ "problemi di slicing?" - -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "Quando è necessario stampare con lo sportello della stampante aperto\n" -#~ "L'apertura dello sportello della stampante può ridurre la probabilità di " -#~ "intasamento dell'estrusore/hotend quando si stampa un filamento a " -#~ "temperatura inferiore con una temperatura dell'involucro più elevata. " -#~ "Maggiori informazioni su questo nel Wiki." - -#~ msgid "Embeded" -#~ msgstr "Integrato" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Mostra i modelli online selezionati dallo staff nella home page" - -#~ msgid "Online Models" -#~ msgstr "Modelli Online" - -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "The minimum printing speed when slowing down for cooling." - -#~ msgid "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clog." -#~ msgstr "" -#~ "La temperatura del piano supera la temperatura di vetrificazione del " -#~ "filamento. Aprire lo sportello anteriore della stampante prima di " -#~ "stampare per evitare l'intasamento del nozzle." - -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "Temperature of vitrification" - -#~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" -#~ msgstr "" -#~ "Material becomes soft at this temperature. Thus, the heat bed cannot be " -#~ "hotter than this temperature." - -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "Enable this option if the machine has an auxiliary part cooling fan" - -#~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" -#~ msgstr "" -#~ "This is the speed of auxiliary part cooling fan. The auxiliary fan will " -#~ "run at this speed during printing except for during the first several " -#~ "layers which may be set to have no part cooling." - -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "Empty layers around bottom are replaced by nearest normal layers." - -#~ msgid "The model has too many empty layers." -#~ msgstr "Il modello ha troppi layers vuoti." - -#~ msgid "Cali" -#~ msgstr "Calib." - -#~ msgid "Calibration of extrusion" -#~ msgstr "Calibrazione estrusione" - -#~ msgid "Push new filament into the extruder" -#~ msgstr "Inserisco il nuovo filamento nell'estrusore" +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Atramos: ištaisyti skyles sluoksnyje %d" #, c-format, boost-format -#~ msgid "" -#~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" -#~ msgstr "" -#~ "The bed temperature of other layers is lower than the bed temperature of " -#~ "the first layer by more than %d degrees centigrade.\n" -#~ "This may cause models to break free from the build plate during printing." - -#~ msgid "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blocked and printing failure\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed" -#~ msgstr "" -#~ "La temperatura del piano è superiore alla temperatura di vetrificazione " -#~ "di questo filamento.\n" -#~ "Ciò può causare il blocco del nozzle e il fallimento della stampa.\n" -#~ "Si prega di tenere la stampante aperta durante il processo di stampa per " -#~ "garantire la circolazione dell'aria o ridurre la temperatura del piano." - -#~ msgid "Total Time Estimation" -#~ msgstr "Stima del tempo totale" - -#~ msgid "Resonance frequency identification" -#~ msgstr "Identificazione frequenza di risonanza" - -#~ msgid "Immediately score" -#~ msgstr "Punteggio immediato" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Assegna un punteggio per il tuo modello Bambu Market preferito." - -#~ msgid "Score" -#~ msgstr "Punteggio" - -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "Bambu High Temperature Plate" - -#~ msgid "Can't connect to the printer" -#~ msgstr "Impossibile connettersi alla stampante" - -#~ msgid "Recommended temperature range" -#~ msgstr "Recommended temperature range" - -#~ msgid "High Temp Plate" -#~ msgstr "High Temp Plate" - -#~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" -#~ msgstr "" -#~ "This is the bed temperature when the high temperature plate is installed. " -#~ "A value of 0 means the filament does not support printing on the High " -#~ "Temp Plate." - -#~ msgid "Internal bridge support thickness" -#~ msgstr "Spessore supporto interno del ponte" - -#~ msgid "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." -#~ msgstr "" -#~ "Stile e forma del supporto. Per supporti normali, la proiezione dei " -#~ "supporti in una griglia regolare creerà supporti più stabili " -#~ "(impostazione predefinita), mentre le torri di supporto aderenti faranno " -#~ "risparmiare materiale e ridurranno le giunzioni oggetto.\n" -#~ "Per i supporti ad albero, lo stile slim unirà i rami in modo più " -#~ "aggressivo e risparmierà molto materiale (impostazione predefinita), " -#~ "mentre lo stile ibrido creerà una struttura simile a quella dei sostegni " -#~ "normali sotto grandi sporgenze piatte." - -#~ msgid "Bed temperature difference" -#~ msgstr "Bed temperature difference" - -#~ msgid "" -#~ "Do not recommend bed temperature of other layer to be lower than initial " -#~ "layer for more than this threshold. Too low bed temperature of other " -#~ "layer may cause the model broken free from build plate" -#~ msgstr "" -#~ "Non è consigliabile che la temperatura del piano degli altri layer sia " -#~ "inferiore a quella del primo layer di oltre questa soglia. Una " -#~ "temperatura del piano troppo bassa degli altri layer può causare il " -#~ "distacco dell'oggetto dal piatto." - -#~ msgid "Orient the model" -#~ msgstr "Orient the model" +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Atramos: skleisti šakas sluoksnyje %d" \ No newline at end of file diff --git a/localization/i18n/nl/Snapmaker_Orca_nl.po b/localization/i18n/nl/Snapmaker_Orca_nl.po index 0836a3f2ce..a5c3a6dc44 100644 --- a/localization/i18n/nl/Snapmaker_Orca_nl.po +++ b/localization/i18n/nl/Snapmaker_Orca_nl.po @@ -3,19 +3,132 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: \n" +"Last-Translator: \n" +"Language-Team: \n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" -"X-Generator: Localazy (https://localazy.com)\n" +"X-Generator: Poedit 3.4.4\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU wordt niet ondersteund door AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Vochtige PVA zal flexibel worden en vast komen te zitten in de AMS, zorg er " +"dus voor dat je het droogt voor gebruik." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"CF/GF-filamenten zijn hard en bros. Ze kunnen gemakkelijk breken of vast " +"komen te zitten in AMS." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Temperatuur" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Inactief" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Serienummer:" + +msgid "Version:" +msgstr "Versie:" + +msgid "Latest version" +msgstr "Nieuwste versie" + +msgid "Support Painting" msgstr "Ondersteuning (Support) tekenen" -msgid "Alt + Mouse wheel" -msgstr "Alt + muiswiel" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Muiswiel" msgid "Section view" msgstr "Doorsnede" @@ -23,9 +136,6 @@ msgstr "Doorsnede" msgid "Reset direction" msgstr "Richting terugzetten" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + muiswiel" - msgid "Pen size" msgstr "Pengrootte" @@ -41,9 +151,6 @@ msgstr "Rechter muisknop" msgid "Block supports" msgstr "Ondersteuning blokkeren" -msgid "Shift + Left mouse button" -msgstr "Shift + linker muisknop" - msgid "Erase" msgstr "Wissen" @@ -103,11 +210,11 @@ msgid "Gizmo-Place on Face" msgstr "Plaats op vlak" msgid "Lay on face" -msgstr "Op deze zijde neerleggen." +msgstr "Op zijde leggen" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Het aantal filamenten overschrijdt het maximale aantal dat het " @@ -150,12 +257,21 @@ msgstr "Emmer vullen" msgid "Height range" msgstr "Hoogtebereik" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "Schakel draadmodel in of uit" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Annuleren" + msgid "Shortcut Key " msgstr "Sneltoest " @@ -178,9 +294,33 @@ msgstr "Geschilderd kleur verwijderen" msgid "Painted using: Filament %1%" msgstr "Geschilderd met filament %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Penseelgrootte" + +msgid "Brush shape" +msgstr "Penseelvorm" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Verplaats" +msgid "Please select at least one object." +msgstr "Selecteer ten minste één object." + msgid "Gizmo-Move" msgstr "Verplaatsen" @@ -211,14 +351,20 @@ msgstr "in" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Positie" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotatie" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Schaalverhoudingen" @@ -235,9 +381,6 @@ msgstr "Vertalen" msgid "Group Operations" msgstr "Groepsbewerkingen" -msgid "Set Position" -msgstr "Positie instellen" - msgid "Set Orientation" msgstr "Oriëntatie instellen" @@ -250,24 +393,33 @@ msgstr "Positie herstellen" msgid "Reset Rotation" msgstr "Rotatie herstellen" +msgid "Object coordinates" +msgstr "Objectcoördinaten" + msgid "World coordinates" msgstr "Wereldcoördinaten" -msgid "Object coordinates" +msgid "Translate(Relative)" msgstr "" -msgid "°" -msgstr "°" +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Maat" -msgid "%" -msgstr "%" - msgid "uniform scale" -msgstr "Uniform schalen" +msgstr "uniform schalen" msgid "Planar" msgstr "Planair" @@ -291,7 +443,7 @@ msgid "Snap" msgstr "Snap" msgid "Prism" -msgstr "" +msgstr "Prisma" msgid "Frustum" msgstr "Frustum" @@ -309,7 +461,7 @@ msgid "Place on cut" msgstr "Op kniplijn plaatsen" msgid "Flip upside down" -msgstr "" +msgstr "Draai ondersteboven" msgid "Connectors" msgstr "Verbindingen" @@ -329,6 +481,12 @@ msgstr "Vorm" msgid "Depth" msgstr "Diepte" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotatie" + msgid "Groove" msgstr "Groef" @@ -424,9 +582,6 @@ msgstr "" msgid "Confirm connectors" msgstr "Verbindingen bevestigen" -msgid "Cancel" -msgstr "Annuleren" - msgid "Build Volume" msgstr "" @@ -520,7 +675,7 @@ msgstr "Snij met behulp van vlak" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"Niet-gevormde randen worden veroorzaakt door snijgereedschap: wil je dit nu " +"hiet-gevormde randen worden veroorzaakt door snijgereedschap: wil je dit nu " "herstellen?" msgid "Repairing model object" @@ -585,14 +740,10 @@ msgstr "%d driehoeken" msgid "Show wireframe" msgstr "Draadmodel tonen" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Kan niet toepassen bij een voorvertoning." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "De toepassing wordt al geannuleerd. Wacht even alstublieft." msgid "Face recognition" @@ -601,12 +752,6 @@ msgstr "Gezichtsherkenning" msgid "Perform Recognition" msgstr "Herkenning uitvoeren" -msgid "Brush size" -msgstr "Penseelgrootte" - -msgid "Brush shape" -msgstr "Penseelvorm" - msgid "Enforce seam" msgstr "Naad versterken" @@ -644,7 +789,7 @@ msgid "Angle" msgstr "Hoek" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "Embedded depth" @@ -657,8 +802,8 @@ msgstr "Oppervlak" msgid "Horizontal text" msgstr "Horizontale tekst" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Muis op of neer" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Draai tekst" @@ -668,11 +813,11 @@ msgstr "Tekstvorm" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" -msgstr "" +msgstr "Text draaien" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "" +msgstr "Text verplaatsen" msgid "Set Mirror" msgstr "Stel spiegeling in" @@ -750,16 +895,16 @@ msgstr "" #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "" +msgstr "Lettertype \"%1%\" kan niet worden geselecteerd." msgid "Operation" msgstr "" msgid "Join" -msgstr "" +msgstr "Samenvoegen" msgid "Click to change text into object part." -msgstr "" +msgstr "Klik om tekst in objectgedeelte te veranderen." msgid "You can't change a type of the last solid part of the object." msgstr "" @@ -770,7 +915,7 @@ msgid "Cut" msgstr "Knippen" msgid "Click to change part type into negative volume." -msgstr "" +msgstr "Klik om het onderdeeltype te wijzigen naar een negatief volume." msgid "Modifier" msgstr "Aanpasser" @@ -782,81 +927,81 @@ msgid "Change Text Type" msgstr "" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "" +msgid "Rename style (%1%) for embossing text" +msgstr "Stijl(%1%) hernoemen voor reliëftekst" msgid "Name can't be empty." -msgstr "" +msgstr "Naam mag niet leeg zijn." msgid "Name has to be unique." -msgstr "" +msgstr "Naam moet uniek zijn." msgid "OK" -msgstr "Offline" +msgstr "OK" msgid "Rename style" -msgstr "" +msgstr "Stijl hernoemen" msgid "Rename current style." -msgstr "" +msgstr "Huidige stijl hernoemen." msgid "Can't rename temporary style." -msgstr "" +msgstr "Kan tijdelijke stijl niet hernoemen." msgid "First Add style to list." -msgstr "" +msgstr "Voeg eerst een stijl toe aan de lijst." #, boost-format msgid "Save %1% style" -msgstr "" +msgstr "Bewaar %1% stijl" msgid "No changes to save." -msgstr "" +msgstr "Geen wijzigingen om op te slaan." msgid "New name of style" -msgstr "" +msgstr "Nieuwe naam van stijl" msgid "Save as new style" -msgstr "" +msgstr "Opslaan als nieuwe stijl" msgid "Only valid font can be added to style." -msgstr "" +msgstr "Alleen geldige lettertypen kunnen aan de stijl worden toegevoegd." msgid "Add style to my list." -msgstr "" +msgstr "Voeg stijl toe aan mijn lijst." msgid "Save as new style." -msgstr "" +msgstr "Opslaan als nieuwe stijl." msgid "Remove style" -msgstr "" +msgstr "Stijl verwijderen" msgid "Can't remove the last existing style." -msgstr "" +msgstr "Kan de laatst bestaande stijl niet verwijderen." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "" +msgstr "Weet u zeker dat u de stijl \"%1%\" permanent wilt verwijderen?" #, boost-format msgid "Delete \"%1%\" style." -msgstr "" +msgstr "Stijl \"%1%\" verwijderen." #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "" +msgstr "Kan \"%1%\" niet verwijderen. Het is de laatste stijl." #, boost-format msgid "Can't delete temporary style \"%1%\"." -msgstr "" +msgstr "Kan tijdelijke stijl \"%1%\" niet verwijderen." #, boost-format msgid "Modified style \"%1%\"" -msgstr "" +msgstr "Gewijzigde stijl \"%1%\"" #, boost-format msgid "Current style is \"%1%\"" -msgstr "" +msgstr "Huidige stijl is \"%1%\"" #, boost-format msgid "" @@ -864,13 +1009,17 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" +"Stijl wijzigen naar \"%1%\" zal de huidige stijlwijziging ongedaan maken.\n" +"\n" +"Wilt u toch doorgaan?" msgid "Not valid style." -msgstr "" +msgstr "Ongeldige stijl." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "" +"Stijl \"%1%\" kan niet worden gebruikt en wordt uit de lijst verwijderd." msgid "Unset italic" msgstr "" @@ -925,18 +1074,18 @@ msgstr "Bovenste" msgctxt "Alignment" msgid "Middle" -msgstr "" +msgstr "Midden" msgctxt "Alignment" msgid "Bottom" msgstr "Onderste" msgid "Revert alignment." -msgstr "" +msgstr "Uitlijning terugdraaien." #. TRN EmbossGizmo: font units msgid "points" -msgstr "" +msgstr "punten" msgid "Revert gap between characters" msgstr "" @@ -971,7 +1120,7 @@ msgstr "" msgid "Undo rotation" msgstr "" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -990,11 +1139,18 @@ msgid "Orient the text towards the camera." msgstr "" #, boost-format -msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +msgid "Font \"%1%\" can't be used. Please select another." msgstr "" +#, boost-format +msgid "" +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." +msgstr "" +"Kan niet exact hetzelfde lettertype laden(\"%1%\"). Er is een vergelijkbaar " +"lettertype(\"%2%\") geselecteerd. U moet een lettertype opgeven om tekst te " +"kunnen bewerken." + msgid "No symbol" msgstr "" @@ -1002,7 +1158,7 @@ msgid "Loading" msgstr "Laden" msgid "In queue" -msgstr "" +msgstr "In wachtrij" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent @@ -1077,7 +1233,7 @@ msgid "Leave SVG gizmo" msgstr "" msgid "SVG actions" -msgstr "" +msgstr "SVG acties" msgid "SVG" msgstr "SVG" @@ -1105,11 +1261,11 @@ msgstr "" msgid "Undefined stroke type" msgstr "" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" @@ -1117,7 +1273,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1147,7 +1303,7 @@ msgstr "" msgid "Change file" msgstr "" -msgid "Change to another .svg file" +msgid "Change to another SVG file." msgstr "" msgid "Forget the file path" @@ -1172,7 +1328,7 @@ msgstr "Opslaan Als" msgid "Save SVG file" msgstr "" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "" msgid "Size in emboss direction." @@ -1240,6 +1396,9 @@ msgstr "" msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "" +msgid "No feature" +msgstr "" + msgid "Vertex" msgstr "Vertex" @@ -1264,9 +1423,6 @@ msgstr "Midden van rand" msgid "Center of circle" msgstr "Middelpunt van cirkel" -msgid "ShiftLeft mouse button" -msgstr "" - msgid "Select feature" msgstr "Functie selecteren" @@ -1282,18 +1438,22 @@ msgstr "Selectie herstarten" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "" +msgid "Cancel a feature until exit" +msgstr "Een functie annuleren tot afsluiten" msgid "Measure" msgstr "Maatregel" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "Bevestig explosieverhouding = 1 en selecteer ten minste één object" + msgid "Edit to scale" msgstr "Op schaal bewerken" msgctxt "Verb" -msgid "Scale" -msgstr "Schalen" +msgid "Scale all" +msgstr "Alle schalen" msgid "None" msgstr "Geen" @@ -1307,23 +1467,79 @@ msgstr "Lengte" msgid "Selection" msgstr "Selectie" +msgid " (Moving)" +msgstr " (Bewegen)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Selecteer 2 vlakken op objecten en \n" +" objecten samenvoegen." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" + +msgid "Face" +msgstr "Face" + +msgid " (Fixed)" +msgstr " (Fixed)" + +msgid "Point" +msgstr "Point" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" + +msgid "Warning: please select Plane's feature." +msgstr "" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" + +msgid "Warning: please select two different meshes." +msgstr "" + msgid "Copy to clipboard" msgstr "Kopieer naar klembord" msgid "Perpendicular distance" -msgstr "Perpendicular distance" +msgstr "" msgid "Distance" -msgstr "Distance" +msgstr "" msgid "Direct distance" -msgstr "Direct distance" +msgstr "" msgid "Distance XYZ" -msgstr "Distance XYZ" +msgstr "" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "" + +msgid "Center coincidence" +msgstr "" + +msgid "Feature 1" +msgstr "Feature 1" + +msgid "Reverse rotation" +msgstr "" + +msgid "Rotate around center:" +msgstr "" + +msgid "Parallel distance:" +msgstr "" + +msgid "Flip by Face 2" +msgstr "" msgid "Notice" msgstr "Let op" @@ -1362,8 +1578,11 @@ msgstr "" "Configuratiebestand “%1%” werd geladen, maar sommige waarden werden niet " "herkend." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca zal sluiten, omdat het geen geheugen meer heeft. Dit kan een bug " @@ -1414,6 +1633,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1458,26 +1681,26 @@ msgstr "De huidige voorinstellingen worden geladen" msgid "Loading a mode view" msgstr "Een modusweergave laden" -msgid "Choose one file (3mf):" -msgstr "Kies één bestand (3mf):" +msgid "Choose one file (3MF):" +msgstr "Kies één bestand (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Kies één of meer bestanden (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Kies één of meer bestanden (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Kies één of meer bestanden (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Kies één of meer bestanden (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" -msgstr "" +msgstr "Kies ZIP bestand" -msgid "Choose one file (gcode/3mf):" -msgstr "Kies één bestand (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Kies één bestand (GCODE/3MF):" msgid "Some presets are modified." msgstr "Sommige voorinstellingen zijn aangepast." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project ze " @@ -1490,17 +1713,17 @@ msgid "new or open project file is not allowed during the slicing process!" msgstr "nieuw of geopend projectbestand is niet toegestaan tijdens het slicen!" msgid "Open Project" -msgstr "Open project" +msgstr "" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "De versie van Snapmaker Orca is te oud en dient te worden bijgewerkt naar de " "nieuwste versie voordat deze normaal kan worden gebruikt" msgid "Privacy Policy Update" -msgstr "Privacy Policy Update" +msgstr "" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " @@ -1514,7 +1737,7 @@ msgid "Sync user presets" msgstr "Synchroniseer gebruikersvoorinstellingen" msgid "Loading user preset" -msgstr "Voorinstelling voor gebruiker laden" +msgstr "Gebruikersvoorinstelling laden" msgid "Switching application language" msgstr "De taal van de applicatie wordt aangepast" @@ -1564,7 +1787,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Initialisatie van Snapmaker Orca GUI is mislukt" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Fatale fout, uitzondering tegengehouden: %1%" msgid "Quality" @@ -1594,12 +1817,18 @@ msgstr "Aantal solide bovenste lagen" msgid "Top Minimum Shell Thickness" msgstr "Minimale dikte van de bovenste laag" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "Aantal gesloten bodemlagen" msgid "Bottom Minimum Shell Thickness" msgstr "Minimale bodemdikte" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Strijken" @@ -1666,6 +1895,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "Verwijder het geselecteerde object" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Laden..." @@ -1687,6 +1919,9 @@ msgstr "Torus" msgid "Orca Cube" msgstr "Orca-kubus" +msgid "Orca Tolerance Test" +msgstr "" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1704,7 +1939,7 @@ msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1758,6 +1993,12 @@ msgstr "Vervangen door STL" msgid "Replace the selected part with new STL" msgstr "Vervang het geselecteerde onderdeel door een nieuwe STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Verander filament" @@ -1772,7 +2013,7 @@ msgid "Filament %d" msgstr "Filament %d" msgid "current" -msgstr "Huidige" +msgstr "huidige" msgid "Scale to build volume" msgstr "Schalen naar bruikbaar volume" @@ -1795,16 +2036,16 @@ msgstr "Uitspoelen in de ondersteuning van objecten" msgid "Edit in Parameter Table" msgstr "Bewerken in de parametertabel" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Omzetten vanuit inch" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Terugzetten naar inch" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Omzetten vanuit meter" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Terugzetten naar meter" msgid "Assemble" @@ -1893,10 +2134,19 @@ msgstr "Splits het geleselcteerde object op" msgid "Auto orientation" msgstr "Automatisch oriënteren" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "" "Automatisch oriënteren van het object om de printkwaliteit te verbeteren." +msgid "Edit" +msgstr "Bewerken" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Alles selecteren" @@ -1933,6 +2183,30 @@ msgstr "Verwijder printbed" msgid "Remove the selected plate" msgstr "Verwijder het huidige printbed" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Dupliceren" @@ -1942,9 +2216,18 @@ msgstr "Model vereenvoudigen" msgid "Center" msgstr "Centreren" +msgid "Drop" +msgstr "" + msgid "Edit Process Settings" msgstr "Procesinstellingen bewerken" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Pas de printinstellingen aan voor een enkel object" @@ -1990,9 +2273,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d non-manifold edges@%1$d non-manifold edges" msgstr[1] "%1$d non-manifold edges@%1$d non-manifold edges" -msgid "Right click the icon to fix model object" +msgid "Click the icon to repair model object" msgstr "" -"Klik met de rechter muisknop op het pictogram om het modelobject te repareren" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2047,6 +2329,9 @@ msgstr "" "Schakel over naar de instellingsmodus per object om procesinstellingen van " "geselecteerde objecten te bewerken." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Verwijder verbinding van object dat deel is van een knipbewerking" @@ -2065,16 +2350,11 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." -msgstr "" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " "cut information first." +msgstr "" msgid "Delete all connectors" msgstr "Verwijder alle vberbindingen" @@ -2082,16 +2362,14 @@ msgstr "Verwijder alle vberbindingen" msgid "Deleting the last solid part is not allowed." msgstr "Het is niet toegestaand om het laaste vaste deel te verwijderen." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "" -"Het doelbestand bevat slechts 1 onderdeel en kan daarom niet worden " -"opgesplitst." msgid "Assembly" msgstr "Montage" msgid "Cut Connectors information" -msgstr "Cut Connectors information" +msgstr "" msgid "Object manipulation" msgstr "Objectmanipulatie" @@ -2127,14 +2405,14 @@ msgid "Selection conflicts" msgstr "Selectieconflicten" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Als het eerste geselecteerde item een object is, dient het tweede item ook " "een object te zijn." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Als het eerst geselecteerde item een onderdeel is, moet het tweede een " "onderdeel van hetzelfde object zijn." @@ -2191,10 +2469,10 @@ msgid "to" msgstr "naar" msgid "Remove height range" -msgstr "Remove height range" +msgstr "" msgid "Add height range" -msgstr "Add height range" +msgstr "" msgid "Invalid numeric." msgstr "Onjuist getal." @@ -2204,7 +2482,7 @@ msgstr "" "één cel kan alleen naar één of meerdere cellen in dezelfde kolom worden " "gekopieerd" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "Het kopiëren van meerdere cellen wordt niet ondersteund." msgid "Outside" @@ -2225,14 +2503,17 @@ msgstr "Brim automatisch instellen" msgid "Mouse ear" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" -msgstr "Outer brim only" +msgstr "" msgid "Inner brim only" -msgstr "Inner brim only" +msgstr "" msgid "Outer and inner brim" -msgstr "Outer and inner brim" +msgstr "" msgid "No-brim" msgstr "Geen extra rand (brim)" @@ -2262,13 +2543,13 @@ msgid "More" msgstr "Meer" msgid "Open Preferences." -msgstr "Voorkeuren openen" +msgstr "Voorkeuren openen." msgid "Open next tip." -msgstr "Volgende tip openen" +msgstr "Volgende tip openen." msgid "Open Documentation in web browser." -msgstr "Documentatie openen in een webbrowser" +msgstr "Documentatie openen in een webbrowser." msgid "Color" msgstr "Kleur" @@ -2283,13 +2564,13 @@ msgid "Custom" msgstr "Aangepast" msgid "Pause:" -msgstr "Pause:" +msgstr "" msgid "Custom Template:" -msgstr "Custom Template:" +msgstr "" msgid "Custom G-code:" -msgstr "Custom G-code:" +msgstr "" msgid "Custom G-code" msgstr "Aangepaste G-code" @@ -2301,46 +2582,46 @@ msgid "Jump to Layer" msgstr "Spring naar laag" msgid "Please enter the layer number" -msgstr "Voer het laagnummer in." +msgstr "Voer het laagnummer in" msgid "Add Pause" msgstr "Pauze toevoegen" msgid "Insert a pause command at the beginning of this layer." -msgstr "Insert a pause command at the beginning of this layer." +msgstr "" msgid "Add Custom G-code" msgstr "Aangepaste G-code toevoegen" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Insert custom G-code at the beginning of this layer." +msgstr "" msgid "Add Custom Template" -msgstr "Aangepaste sjabloon toevoegen" +msgstr "" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "Insert template custom G-code at the beginning of this layer." +msgstr "" msgid "Filament " -msgstr "Filament" +msgstr "Filament " msgid "Change filament at the beginning of this layer." -msgstr "Change filament at the beginning of this layer." +msgstr "" msgid "Delete Pause" msgstr "Pauze verwijderen" msgid "Delete Custom Template" -msgstr "Delete Custom Template" +msgstr "" msgid "Edit Custom G-code" -msgstr "Edit Custom G-code" +msgstr "" msgid "Delete Custom G-code" -msgstr "Delete Custom G-code" +msgstr "" msgid "Delete Filament Change" -msgstr "Delete Filament Change" +msgstr "" msgid "No printer" msgstr "Geen printer" @@ -2352,109 +2633,38 @@ msgid "Failed to connect to the server" msgstr "Verbinding maken met de server is mislukt" msgid "Check the status of current system services" -msgstr "Check the status of current system services" +msgstr "" msgid "code" -msgstr "code" +msgstr "" msgid "Failed to connect to cloud service" -msgstr "Failed to connect to cloud service" +msgstr "" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "Please click on the hyperlink above to view the cloud service status" +msgstr "" msgid "Failed to connect to the printer" msgstr "Verbinding maken met de printer is mislukt" msgid "Connection to printer failed" -msgstr "Connection to printer failed" +msgstr "" msgid "Please check the network connection of the printer and Orca." -msgstr "Please check the network connection of the printer and Orca." +msgstr "" msgid "Connecting..." msgstr "Verbinden..." -msgid "?" -msgstr " ?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Leeg" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Refill" - -msgid "AMS not connected" -msgstr "AMS niet aangesloten" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "" msgid "Unload" msgstr "Lossen" -msgid "Ext Spool" -msgstr "Ext Spool" - -msgid "Tips" -msgstr "Tips" - -msgid "Guide" -msgstr "Handleiding" - -msgid "Retry" -msgstr "Opnieuw proberen" - -msgid "Calibrating AMS..." -msgstr "AMS kalibreren..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "" -"Er is een probleem opgetreden tijdens de kalibratie. Klik om de oplossing te " -"bekijken." - -msgid "Calibrate again" -msgstr "Opnieuw kalibreren" - -msgid "Cancel calibration" -msgstr "Kalibreren afbreken" - -msgid "Idling..." -msgstr "Inactief..." - -msgid "Heat the nozzle" -msgstr "Verwarm de nozzle" - -msgid "Cut filament" -msgstr "Filament afsnijden" - -msgid "Pull back current filament" -msgstr "huidig filament terugtrekken" - -msgid "Push new filament into extruder" -msgstr "Nieuw filament in de extruder laden" - -msgid "Purge old filament" -msgstr "Oud filament verwijderen" - -msgid "Feed Filament" -msgstr "Voer filament in" - -msgid "Confirm extruded" -msgstr "Bevestig geëxtrudeerd" - -msgid "Check filament location" -msgstr "Controleer de positie van het filament" - -msgid "Grab new filament" -msgstr "Grab new filament" - msgid "" "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " "load or unload filaments." @@ -2462,22 +2672,164 @@ msgstr "" "Kies een AMS-sleuf en druk op de knop \"Laden\" of \"Lossen\" om automatisch " "filament te laden of te ontladen." -msgid "Edit" -msgstr "Bewerken" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filter" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Koeling" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Bovenste" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "Inactief..." + +msgid "Heat the nozzle" +msgstr "Verwarm het mondstuk" + +msgid "Cut filament" +msgstr "Filament afsnijden" + +msgid "Pull back current filament" +msgstr "Huidig filament terugtrekken" + +msgid "Push new filament into extruder" +msgstr "Nieuw filament in de extruder laden" + +msgid "Grab new filament" +msgstr "" + +msgid "Purge old filament" +msgstr "Oud filament verwijderen" + +msgid "Confirm extruded" +msgstr "Bevestig geëxtrudeerd" + +msgid "Check filament location" +msgstr "Controleer de positie van het filament" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "De geselecteerde objecten bevinden zich op een vergrendeld printbed.\n" "Deze objecten kunnen niet automatisch worden gerangschikt." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Er zijn geen objecten geselecteerd die geschikt kunnen worden." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Dit printbed is vergrendeld,\n" "Het is niet mogelijk om automatisch te rangschikken op dit printbed." @@ -2486,7 +2838,7 @@ msgid "Arranging..." msgstr "Rangschikken..." msgid "Arranging" -msgstr "Rangschikken..." +msgstr "Rangschikken" msgid "Arranging canceled." msgstr "Rangschikken geannuleerd." @@ -2517,24 +2869,24 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "De geselecteerde objecten bevinden zich op een vergrendeld printbed.\n" "Deze objecten kunnen niet automatisch worden georiënteerd." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Dit printbed is vergrendeld,\n" "Het is niet mogelijk om automatisch te orienteren op dit printbed." msgid "Orienting..." -msgstr "Oriënteren " +msgstr "Oriënteren..." msgid "Orienting" -msgstr "Oriënteren " +msgstr "Oriënteren" msgid "Orienting canceled." msgstr "" @@ -2543,10 +2895,10 @@ msgid "Filling" msgstr "Vullen" msgid "Bed filling canceled." -msgstr "Bed filling canceled." +msgstr "" msgid "Bed filling done." -msgstr "Bed filling done." +msgstr "" msgid "Searching for optimal orientation" msgstr "Zoeken naar optimale oriëntatie" @@ -2570,52 +2922,44 @@ msgid "Abnormal print file data. Please slice again." msgstr "Abnormal print file data: please slice again." msgid "Task canceled." -msgstr "Task canceled." +msgstr "" msgid "Upload task timed out. Please check the network status and try again." -msgstr "Upload task timed out. Please check the network status and try again." +msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Verbinding met cloudservice is mislukt. Probeer het nog eens." -msgid "Print file not found. please slice again." -msgstr "Print file not found; please slice again." +msgid "Print file not found. Please slice again." +msgstr "" msgid "" "The print file exceeds the maximum allowable size (1GB). Please simplify the " "model and slice again." msgstr "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." msgid "Failed to send the print job. Please try again." msgstr "Het verzenden van de printopdracht is mislukt. Probeer het opnieuw." msgid "Failed to upload file to ftp. Please try again." -msgstr "Failed to upload file to ftp. Please try again." +msgstr "" msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "" -"Check the current status of the Bambu Lab server by clicking on the link " -"above." msgid "" "The size of the print file is too large. Please adjust the file size and try " "again." msgstr "" -"The size of the print file is too large. Please adjust the file size and try " -"again." -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "Print file not found; please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." +msgstr "" msgid "" "Failed to upload print file to FTP. Please check the network status and try " "again." msgstr "" -"Failed to upload print file via FTP. Please check the network status and try " -"again." msgid "Sending print job over LAN" msgstr "Printopdracht verzenden via LAN" @@ -2644,54 +2988,83 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Succesvol verzonden. Springt automatisch naar de volgende pagina in %ss" -msgid "An SD card needs to be inserted before printing via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" msgstr "" -"Er moet een MicroSD-kaart worden geplaatst voordat er via LAN kan worden " -"afgedrukt." -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "G-codebestand verzenden via LAN" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "G-codebestand naar microSD-kaart verzenden" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Succesvol verzonden. Sluit de huidige pagina in %s s" -msgid "An SD card needs to be inserted before sending to printer." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." msgstr "" -"Een MicroSD-kaart moet worden geplaatst voordat er iets naar de printer " -"wordt gestuurd." msgid "Importing SLA archive" -msgstr "Importing SLA archive" +msgstr "" msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer presets first before importing that SLA archive." msgid "Importing canceled." -msgstr "Importing canceled." +msgstr "" msgid "Importing done." -msgstr "Importing done." +msgstr "" msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "You cannot load an SLA project with a multi-part object on the bed" +msgstr "" msgid "Please check your object list before preset changing." -msgstr "Please check your object list before preset changing." +msgstr "" msgid "Attention!" msgstr "Let op!" @@ -2702,11 +3075,11 @@ msgstr "Downloaden" msgid "Download failed" msgstr "Downloaden mislukt" -msgid "Cancelled" +msgid "Canceled" msgstr "Geannuleerd" -msgid "Install successfully." -msgstr "Succesvol geïnstalleerd" +msgid "Installed successfully" +msgstr "Succesvol geïnstalleerd." msgid "Installing" msgstr "Installeren" @@ -2729,7 +3102,7 @@ msgstr "Snapmaker Orca is gelicentieerd onder " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero Algemene Openbare Licentie, versie 3" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2747,9 +3120,6 @@ msgstr "" msgid "About %s" msgstr "Over %s" -msgid "Snapmaker Orca " -msgstr "" - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" @@ -2779,14 +3149,11 @@ msgstr "Bevestigen" msgid "Close" msgstr "Sluiten" -msgid "Colour" -msgstr "Kleur" - msgid "" "Nozzle\n" "Temperature" msgstr "" -"Nozzle\n" +"Mondstuk\n" "temperatuur" msgid "max" @@ -2802,11 +3169,6 @@ msgstr "De invoerwaarde moet groter zijn dan %1% en kleiner dan %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"Het instellen van AMS slot informatie tijdens het printen wordt niet " -"ondersteund." - msgid "Factors of Flow Dynamics Calibration" msgstr "Factoren van Flow Dynamics Calibration" @@ -2819,14 +3181,19 @@ msgstr "Factor K" msgid "Factor N" msgstr "Factor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"Het instellen van AMS slot informatie tijdens het printen wordt niet " +"ondersteund." + msgid "Setting Virtual slot information while printing is not supported" -msgstr "Setting Virtual slot information while printing is not supported" +msgstr "" msgid "Are you sure you want to clear the filament information?" -msgstr "Are you sure you want to clear the filament information?" +msgstr "" msgid "You need to select the material type and color first." -msgstr "You need to select the material type and color first." +msgstr "" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" @@ -2836,33 +3203,42 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" -msgstr "Other Color" +msgstr "" msgid "Custom Color" -msgstr "Custom Color" +msgstr "" msgid "Dynamic flow calibration" -msgstr "Dynamic flow calibration" +msgstr "Dynamische flow kalibratie" msgid "" "The nozzle temp and max volumetric speed will affect the calibration " "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"De temperatuur van de nozzle en de maximale volumetrische snelheid zijn van " -"invloed op de kalibratieresultaten. Voer dezelfde waarden in als bij de " +"De temperatuur van het mondstuk en de maximale volumetrische snelheid zijn " +"van invloed op de kalibratieresultaten. Voer dezelfde waarden in als bij de " "daadwerkelijke afdruk. Ze kunnen automatisch worden gevuld door een " "voorinstelling voor filamenten te selecteren." msgid "Nozzle Diameter" -msgstr "Diameter van de nozzle" +msgstr "Mondstukdiameter" msgid "Bed Type" msgstr "Bed type" msgid "Nozzle temperature" -msgstr "Nozzle temperatuur" +msgstr "Mondstuk temperatuur" msgid "Bed Temperature" msgstr "Bed Temperatuur" @@ -2870,15 +3246,9 @@ msgstr "Bed Temperatuur" msgid "Max volumetric speed" msgstr "Maximale volumetrische snelheid" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "Printbed temperatuur" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Start" @@ -2920,14 +3290,79 @@ msgstr "Dynamische flow kalibratie" msgid "Step" msgstr "Stap" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS Slots" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Mondstuk" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Opmerking: Alleen de AMS-slots die met hetzelfde materiaaltype zijn geladen, " -"kunnen worden geselecteerd." msgid "Enable AMS" msgstr "AMS inschakelen" @@ -2941,22 +3376,15 @@ msgstr "AMS uitschakelen" msgid "Print with the filament mounted on the back of chassis" msgstr "Print met filament op een externe spoel" -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Configureer welke AMS-sleuf moet worden gebruikt voor een filament dat voor " "de printopdracht wordt gebruikt." @@ -2976,12 +3404,21 @@ msgstr "AMS niet inschakelen" msgid "Print using materials mounted on the back of the case" msgstr "Print met filament op een externe spoel." -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Printen met filament in AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Print met filament op een externe spoel" +msgid "Auto Refill" +msgstr "" + +msgid "Left" +msgstr "Links" + +msgid "Right" +msgstr "Rechts" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -2989,27 +3426,29 @@ msgstr "" "Als het huidige materiaal op is, gaat de printer verder met afdrukken in de " "volgende volgorde." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Group" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "De printer ondersteunt automatisch bijvullen momenteel niet." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3031,7 +3470,7 @@ msgstr "" "nieuw Bambu Lab filament. Dit duurt ongeveer 20 seconden." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Opmerking: als er tijdens het printen een nieuw filament wordt geplaatst, " @@ -3049,8 +3488,8 @@ msgstr "Update gegevens bij aanzetten" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "De AMS leest automatisch de informatie van het ingevoegde filament bij het " "opstarten. Dit duurt ongeveer 1 minuut. Tijdens het leesproces zullen de " @@ -3069,33 +3508,27 @@ msgid "Update remaining capacity" msgstr "Resterende capaciteit bijwerken" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"De AMS zal een schatting maken van de resterende capaciteit van het Bambu-" -"filament nadat de filamentinformatie is bijgewerkt. Tijdens het afdrukken " -"wordt de resterende capaciteit automatisch bijgewerkt." msgid "AMS filament backup" -msgstr "AMS filament backup" +msgstr "" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS gaat automatisch verder met een andere spoel met dezelfde filament " "eigenschappen wanneer het huidige filament op is." msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." msgid "File" msgstr "Bestand" @@ -3140,10 +3573,14 @@ msgstr "" "Er is een probleem opgetreden. Er is geen vrij geheugen of er een is een bug " "opgetreden" -msgid "Please save project and restart the program. " -msgstr "Sla uw project alstublieft op en herstart het programma. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Sla uw project alstublieft op en herstart het programma." + +msgid "Processing G-code from Previous file..." msgstr "De G-code van het vorige bestand wordt verwerkt..." msgid "Slicing complete" @@ -3162,21 +3599,21 @@ msgid "Overflow" msgstr "Overloop" msgid "Underflow" -msgstr "Underflow" +msgstr "Onderflow" msgid "Floating reserved operand" msgstr "Zwevende gereserveerde operand" msgid "Stack overflow" -msgstr "Stack overflow" +msgstr "" msgid "Running post-processing scripts" msgstr "Het uitvoeren van post-processing scripts" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Onbekende fout opgetreden tijdens exporteren van de G-code." #, boost-format @@ -3227,16 +3664,16 @@ msgstr "" msgid "G-code file exported to %1%" msgstr ".gcode-bestand geëxporteerd naar %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Onbekende fout tijdens het exporteren van de G-code" #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"Het is niet gelukt het gcode bestand op te slaan.\n" +"Het is niet gelukt het G-code bestand op te slaan.\n" "Foutmelding: %1%.\n" "Bronbestand %2%." @@ -3248,225 +3685,6 @@ msgstr "" msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "Upload inplannen in `%1%`. Zie Venster -> Print Host Upload Queue" -msgid "Device" -msgstr "Apparaat" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "Weergave" - -msgid "N/A" -msgstr "N/B" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Toevoegen" - -msgid "Idle" -msgstr "Inactief" - -msgid "Printing" -msgstr "Printen" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Incompatible" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Voorbereiden" - -msgid "Slicing" -msgstr "Slicen" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Verzenden" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Hervatten" - -msgid "Stop" -msgstr "Stop" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Laden..." - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Print opdracht voorbereiden" - -msgid "Abnormal print file data. Please slice again" -msgstr "Abnormale printbestand. Slice opnieuw" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Bed leveling" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Versturen" - -msgid "Name is invalid;" -msgstr "Naam is ongeldig;" - -msgid "illegal characters:" -msgstr "Niet toegestande karakters:" - -msgid "illegal suffix:" -msgstr "Ongeldig achtervoegsel:" - -msgid "The name is not allowed to be empty." -msgstr "Het is niet toegestaand om de naam leeg te laten." - -msgid "The name is not allowed to start with space character." -msgstr "Het is niet toegestaan om een naam met een spatie te laten beginnen." - -msgid "The name is not allowed to end with space character." -msgstr "Het is niet toegestaan om een naam met een spatie te laten eindigen." - -msgid "The name length exceeds the limit." -msgstr "The name length exceeds the limit." - msgid "Origin" msgstr "Begin" @@ -3494,7 +3712,7 @@ msgid "Circular" msgstr "Rond" msgid "Load shape from STL..." -msgstr "Vorm laden vanuit het stl. bestand..." +msgstr "Vorm laden vanuit het STL. bestand..." msgid "Settings" msgstr "Instellingen" @@ -3540,19 +3758,18 @@ msgstr "Kies een STL bestand waaruit het printbed model geladen kan worden:" msgid "Bed Shape" msgstr "Printbed vorm" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"De aanbevolen minimumtemperatuur is lager dan 190 graden of de aanbevolen " -"maximumtemperatuur is hoger dan 300 graden.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" msgid "Please check.\n" msgstr "Controleer het.\n" @@ -3562,46 +3779,46 @@ msgid "" "Please make sure whether to use the temperature to print.\n" "\n" msgstr "" -"Het kan zijn dat de nozzle verstopt raakt indien er geprint wordt met een " +"Het kan zijn dat het mondstuk verstopt raakt indien er geprint wordt met een " "temperatuur buiten de voorgestelde range.\n" "Controleer en bevestig de temperatuur voordat u verder gaat met printen.\n" "\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"De geadviseerde nozzle temperatuur voor dit type filament is [%d, %d] graden " -"Celcius" +"De aanbevolen mondstuk temperatuur voor dit type filament is [%d, %d] graden " +"Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Te kleine maximale volumetrische snelheid.\n" "De waarde is teruggezet naar 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"Current chamber temperature is higher than the material's safe temperature; " -"this may result in material softening and nozzle clogs.The maximum safe " -"temperature for the material is %d" +"De huidige kamertemperatuur is hoger dan de veilige temperatuur van het " +"materiaal; dit kan leiden tot verzachting van het materiaal en verstoppingen " +"van het mondstuk. De maximale veilige temperatuur voor het materiaal is %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Laaghoogte is te klein\n" "Teruggezet naar 0.2mm" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "De ruimte voor het strijken is te klein\n" "Teruggezet naar 0.1" @@ -3647,14 +3864,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3693,45 +3910,58 @@ msgstr "" "JA - laat de prime-tower aan staan\n" "NO - laat onafhankelijke support-laag-hoogte ingeschakeld" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"While printing by object, the extruder may collide with a skirt.\n" -"Thus, reset the skirt layer to 1 to avoid collisions." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Maar machines met een I3-structuur genereren geen timelapsevideo's." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Wilt u de voorgestelde instellingen automatisch aanpassen? \n" +"Wilt u de voorgestelde instellingen automatisch aanpassen?\n" "Ja - Pas de instellingen aan en zet de vaas modus automatisch aan\n" "Nee - Pas de vaas modus deze keer niet toe" +msgid "Printing" +msgstr "Printen" + msgid "Auto bed leveling" msgstr "Automatisch bed levellen" msgid "Heatbed preheating" msgstr "Printbed opwarmen" -msgid "Sweeping XY mech mode" -msgstr "Sweeping XY mech mode" +msgid "Vibration compensation" +msgstr "Trillingscompensatie" msgid "Changing filament" msgstr "Filament wordt gewisseld" @@ -3739,14 +3969,14 @@ msgstr "Filament wordt gewisseld" msgid "M400 pause" msgstr "M400-pauze" -msgid "Paused due to filament runout" -msgstr "De printtaak is gepauzeerd omdat het filament op is" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Hotend opwarmen" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Extrusie wordt gecalibreerd" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Het printbed oppervlak wordt gescand" @@ -3764,84 +3994,143 @@ msgid "Homing toolhead" msgstr "Printkop naar beginpositie" msgid "Cleaning nozzle tip" -msgstr "Nozzle wordt schoongemaakt" +msgstr "Mondstuk wordt schoongemaakt" msgid "Checking extruder temperature" msgstr "Extruder temperatuur wordt gecontroleerd" -msgid "Printing was paused by the user" -msgstr "Printen is onderbroken door de gebruiker" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pauze cover printkop los" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Micro Lidar wordt gecalibreerd" -msgid "Calibrating extrusion flow" -msgstr "De extrusieflow kalibreren" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Onderbroken vanwege storing in de nozzle temperatuur" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Onderbroken vanwege storing in de temperatuur van het printbed" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Lossen van filament" -msgid "Skip step pause" -msgstr "Stappauze overslaan" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Filament bezig met laden" -msgid "Motor noise calibration" -msgstr "Kalibratie van motorgeluid" +msgid "Motor noise cancellation" +msgstr "Motorruisonderdrukking" -msgid "Paused due to AMS lost" -msgstr "Gepauzeerd wegens verlies van AMS" - -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (AMS offline)" msgstr "" -"Gepauzeerd vanwege lage snelheid van de ventilator voor warmteonderbreking" -msgid "Paused due to chamber temperature control error" -msgstr "Gepauzeerd vanwege een fout in de temperatuurregeling van de kamer" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" + +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Koelkamer" -msgid "Paused by the Gcode inserted by user" -msgstr "Gepauzeerd door de Gcode ingevoegd door gebruiker" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Motorgeluid showoff" -msgid "Nozzle filament covered detected pause" -msgstr "Nozzle filament bedekt gedetecteerde pauze" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pauze bij snijfout" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Eerste laag foutpauze" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pauze bij verstopping van het mondstuk" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Onbekend" -msgid "Fatal" -msgstr "Fatale" - -msgid "Serious" -msgstr "Serieuze" - -msgid "Common" -msgstr "Standaard" - msgid "Update successful." msgstr "Update gelukt." @@ -3854,34 +4143,54 @@ msgstr "Verificatie mislukt." msgid "Update failed." msgstr "Updaten mislukt." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/" -"TPU) is not allowed to be loaded." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." msgstr "" -"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order " -"to avoid extruder clogging, it is not allowed to set the chamber temperature " -"above 45℃." msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" + +msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " "control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." +msgstr "" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Het starten van de printopdracht is mislukt" msgid "" @@ -3895,31 +4204,77 @@ msgstr "Huidige stroomsnelheid cali param is ongeldig" msgid "Selected diameter and machine diameter do not match" msgstr "Geselecteerde diameter en machinediameter komen niet overeen" -msgid "Failed to generate cali gcode" -msgstr "Cali gcode niet gegenereerd" +msgid "Failed to generate cali G-code" +msgstr "Cali G-code niet gegenereerd" msgid "Calibration error" msgstr "Kalibratiefout" -msgid "TPU is not supported by AMS." -msgstr "TPU wordt niet ondersteund door AMS." - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF wordt niet ondersteund door AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume Printing" msgstr "" -"Vochtige PVA zal flexibel worden en vast komen te zitten in de AMS, zorg er " -"dus voor dat je het droogt voor gebruik." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "Filament laden" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "" + +msgid "Retry" +msgstr "Opnieuw proberen" + +msgid "Resume" +msgstr "Hervatten" + +msgid "Unknown error." msgstr "" -"CF/GF-filamenten zijn hard en bros. Ze kunnen gemakkelijk breken of vast " -"komen te zitten in AMS." msgid "default" msgstr "Standaard" @@ -3931,7 +4286,7 @@ msgstr "" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3972,7 +4327,7 @@ msgid "Specific for %1%" msgstr "" msgid "Presets" -msgstr "Presets" +msgstr "" msgid "Print settings" msgstr "Print instellingen" @@ -3990,7 +4345,7 @@ msgid "parameter name" msgstr "parameternaam" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s kan geen percentage zijn" #, c-format, boost-format @@ -4002,7 +4357,7 @@ msgstr "Parametervalidatie" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "" msgid "Value is out of range." msgstr "Waarde is buiten het bereik." @@ -4030,10 +4385,27 @@ msgstr "Ingevoerde waarde valt buiten het bereik" msgid "Some extension in the input is invalid" msgstr "" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Onjuist formaat. Het Vector formaat wordt verwacht: \"%1%\"" +msgid "N/A" +msgstr "N/B" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Laaghoogte" @@ -4043,9 +4415,6 @@ msgstr "Lijn dikte" msgid "Fan Speed" msgstr "Ventilator snelheid" -msgid "Temperature" -msgstr "Temperatuur" - msgid "Flow" msgstr "Flow" @@ -4059,13 +4428,13 @@ msgid "Layer Time (log)" msgstr "Laagtijd (logboek)" msgid "Height: " -msgstr "Hoogte:" +msgstr "Hoogte: " msgid "Width: " -msgstr "Breedte:" +msgstr "Breedte: " msgid "Speed: " -msgstr "Snelheid:" +msgstr "Snelheid: " msgid "Flow: " msgstr "Flow: " @@ -4079,7 +4448,7 @@ msgstr "Ventilatorsnelheid:" msgid "Temperature: " msgstr "Temperatuur:" -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "G-codes worden geladen" msgid "Generating geometry vertex data" @@ -4089,7 +4458,7 @@ msgid "Generating geometry index data" msgstr "Geometrie-indexgegevens genereren" msgid "Statistics of All Plates" -msgstr "Statistics of All Plates" +msgstr "" msgid "Display" msgstr "Tonen" @@ -4110,7 +4479,73 @@ msgid "Total time" msgstr "Totale tijd" msgid "Total cost" -msgstr "Total cost" +msgstr "" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Tips:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Tips" msgid "up to" msgstr "tot" @@ -4121,17 +4556,11 @@ msgstr "Boven" msgid "from" msgstr "Van" -msgid "Color Scheme" -msgstr "Kleurschema" - msgid "Time" msgstr "Tijd" -msgid "Percent" -msgstr "Procent" - -msgid "Used filament" -msgstr "Verbruikt filament" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Laaghoogte (mm)" @@ -4178,12 +4607,12 @@ msgstr "verplaatsen" msgid "Extruder" msgstr "Extruder" -msgid "Filament change times" -msgstr "Filamentwisseltijden" - msgid "Cost" msgstr "Kosten" +msgid "Filament change times" +msgstr "Filamentwisseltijden" + msgid "Color change" msgstr "Kleur veranderen" @@ -4193,10 +4622,7 @@ msgstr "Print" msgid "Printer" msgstr "Printer" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -4206,10 +4632,10 @@ msgid "Normal mode" msgstr "Normale modus" msgid "Total Filament" -msgstr "Total Filament" +msgstr "" msgid "Model Filament" -msgstr "Model Filament" +msgstr "" msgid "Prepare time" msgstr "Voorbereidingstijd" @@ -4223,6 +4649,19 @@ msgstr "Omzetten naar stille modus" msgid "Switch to normal mode" msgstr "Omzetten naar normale modus" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Variabele laaghoogte" @@ -4241,27 +4680,15 @@ msgstr "Straal" msgid "Keep min" msgstr "Houd min" -msgid "Left mouse button:" -msgstr "Linker muisknop" - msgid "Add detail" msgstr "Detail toevoegen" -msgid "Right mouse button:" -msgstr "Rechter muisknop:" - msgid "Remove detail" msgstr "Detail verwijderen" -msgid "Shift + Left mouse button:" -msgstr "Shift + linker muisknop:" - msgid "Reset to base" msgstr "Terugzetten naar basis" -msgid "Shift + Right mouse button:" -msgstr "Shift + rechter muisknop:" - msgid "Smoothing" msgstr "Gladmaken" @@ -4274,6 +4701,55 @@ msgstr "Bewerkingsgebied vergroten/verkleinen" msgid "Sequence" msgstr "Reeks" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Object spiegelen" @@ -4281,7 +4757,7 @@ msgid "Tool Move" msgstr "Beweeg tool" msgid "Tool Rotate" -msgstr "Tool Rotate" +msgstr "" msgid "Move Object" msgstr "Beweeg object" @@ -4305,7 +4781,7 @@ msgid "Spacing" msgstr "Uitlijning" msgid "0 means auto spacing." -msgstr "0 means auto spacing." +msgstr "" msgid "Auto rotate for arrangement" msgstr "Automatisch roteren voor rankschikking" @@ -4319,11 +4795,25 @@ msgstr "Vermijd het extrusie kalibratie gebied" msgid "Align to Y axis" msgstr "Uitlijnen op Y-as" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Toevoegen" + msgid "Add plate" msgstr "Printbed toevoegen" -msgid "Auto orient" -msgstr "Automatisch oriënteren" +msgid "Auto orient all/selected objects" +msgstr "Automatisch oriënteren alle/geselecteerde objecten" + +msgid "Auto orient all objects on current plate" +msgstr "Automatisch oriënteren alle objecten op het huidige printbed" msgid "Arrange all objects" msgstr "Alle objecten rangschikken" @@ -4343,12 +4833,30 @@ msgstr "Montageweergave" msgid "Select Plate" msgstr "Printbed selecteren" +msgid "Slicing" +msgstr "Slicen" + +msgid "Slice all" +msgstr "Alles slicen" + +msgid "Failed" +msgstr "Mislukt" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "Montage terug" -msgid "return" +msgid "Return" msgstr "Terug" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "Kleur instellingen" @@ -4361,6 +4869,9 @@ msgstr "Sectie weergave" msgid "Assemble Control" msgstr "Assemblage controle" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Totaal Volume:" @@ -4375,31 +4886,69 @@ msgstr "Maat:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Er bevind zich een object buiten de grenzen van de printplaat." msgid "A G-code path goes beyond the max print height." msgstr "Een G-codepad gaat verder dan de maximale printhoogte." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Een G-code pad treedt buiten de grenzen van de printplaat." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Alleen het object waaraan gewerkt wordt is zichtbaar." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Een object is over de grens van de plaat geplaatst of overschrijdt de " -"hoogtelimiet.\n" -"Los het probleem op door het geheel op of van de plaat te verplaatsen, en " -"controleer of de hoogte binnen het bouwvolume valt." msgid "Calibration step selection" msgstr "Kalibratiestap selectie" @@ -4408,13 +4957,10 @@ msgid "Micro lidar calibration" msgstr "Micro Lidar Kalibratie" msgid "Bed leveling" -msgstr "Bed leveling" +msgstr "" -msgid "Vibration compensation" -msgstr "Trillingscompensatie" - -msgid "Motor noise cancellation" -msgstr "Motorruisonderdrukking" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Kalibratie programma" @@ -4467,24 +5013,21 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "Toon \"Live Video\" gids pagina." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Printer aansluiten (LAN)" msgid "Please input the printer access code:" msgstr "Voer de toegangscode van de printer in:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"U vindt deze in \"Instellingen > Netwerk > Verbindingscode\"\n" -"op de printer, zoals aangegeven in de afbeelding:" msgid "Invalid input." msgstr "Ongeldige invoer" @@ -4504,9 +5047,15 @@ msgstr "Applicatie sluiten terwijl sommige voorinstellingen zijn gewijzigd." msgid "Logging" msgstr "Vastleggen" +msgid "Prepare" +msgstr "Voorbereiden" + msgid "Preview" msgstr "Voorvertoning" +msgid "Device" +msgstr "Apparaat" + msgid "Multi-device" msgstr "Multi-device" @@ -4520,7 +5069,7 @@ msgid "No" msgstr "Nee" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "will be closed before creating a new model. Do you want to continue?" +msgstr "" msgid "Slice plate" msgstr "Slice printbed" @@ -4528,12 +5077,12 @@ msgstr "Slice printbed" msgid "Print plate" msgstr "Printplaat" -msgid "Slice all" -msgstr "Alles slicen" - msgid "Export G-code file" msgstr "G-codebestand exporteren" +msgid "Send" +msgstr "Versturen" + msgid "Export plate sliced file" msgstr "Exporteer plate sliced bestand" @@ -4546,6 +5095,9 @@ msgstr "Print alles" msgid "Send all" msgstr "Alles verzenden" +msgid "Send to Multi-device" +msgstr "" + msgid "Keyboard Shortcuts" msgstr "Sneltoesten" @@ -4580,10 +5132,6 @@ msgstr "Modellen downloaden" msgid "Default View" msgstr "Standaard weergave" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Bovenste" - msgid "Top View" msgstr "Bovenaanzicht" @@ -4606,15 +5154,9 @@ msgstr "Achterkant" msgid "Rear View" msgstr "Achteraanzicht" -msgid "Left" -msgstr "Links" - msgid "Left View" msgstr "Linker zicht" -msgid "Right" -msgstr "Rechts" - msgid "Right View" msgstr "Rechterzijde bekijken" @@ -4630,8 +5172,8 @@ msgstr "Start een nieuw project" msgid "Open a project file" msgstr "Op een project bestand" -msgid "Recent projects" -msgstr "Recente Projecten" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Bewaar project" @@ -4642,9 +5184,6 @@ msgstr "Bewaar huidig project als" msgid "Save Project as" msgstr "Bewaar project als" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Bewaar huidig project als" @@ -4678,7 +5217,7 @@ msgstr "Alle objecten exporteren als STL's" msgid "Export Generic 3MF" msgstr "Generiek 3MF exporteren" -msgid "Export 3mf file without using some 3mf-extensions" +msgid "Export 3MF file without using some 3mf-extensions" msgstr "3mf-bestand exporteren zonder enkele 3mf-toevoegingen te gebruiken" msgid "Export current sliced file" @@ -4693,6 +5232,9 @@ msgstr "Exporteer G-code" msgid "Export current plate as G-code" msgstr "Exporteer de huidige plaat als G-code" +msgid "Export toolpaths as OBJ" +msgstr "Toolpaths exporteren als OBJ" + msgid "Export Preset Bundle" msgstr "" @@ -4744,6 +5286,12 @@ msgstr "Duplicaat geselecteerd" msgid "Clone copies of selections" msgstr "Duplicaten van selecties maken" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "Alles selecteren" @@ -4762,16 +5310,24 @@ msgstr "Perspectiefweergave gebruiken" msgid "Use Orthogonal View" msgstr "Orthogonale weergave gebruiken" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4783,20 +5339,29 @@ msgstr "" msgid "Show &Labels" msgstr "Toon &Labels" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Toon objectlabels in 3D-scène" msgid "Show &Overhang" -msgstr "Show &Overhang" +msgstr "" -msgid "Show object overhang highlight in 3D scene" -msgstr "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." +msgstr "" + +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." +msgstr "" msgid "Preferences" msgstr "Voorkeuren" +msgid "View" +msgstr "Weergave" + msgid "Help" -msgstr "Help" +msgstr "Hulp" msgid "Temperature Calibration" msgstr "Temperatuurkalibratie" @@ -4813,6 +5378,18 @@ msgstr "Fase 2" msgid "Flow rate test - Pass 2" msgstr "Stroomsnelheidstest - Fase 2" +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" + msgid "Flow rate" msgstr "Flowrate" @@ -4822,27 +5399,33 @@ msgstr "Drukverhoging" msgid "Retraction test" msgstr "Retractietest" -msgid "Orca Tolerance Test" -msgstr "Orca Tolerance Test" - msgid "Max flowrate" msgstr "Max flowrate" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Meer..." - msgid "Tutorial" msgstr "Tutorial" msgid "Calibration help" msgstr "Hulp bij kalibratie" -msgid "More calibrations" -msgstr "Meer kalibraties" - msgid "&Open G-code" msgstr "&Open G-code" @@ -4858,9 +5441,6 @@ msgstr "Herlaad vanaf opslagmedium" msgid "Export &Toolpaths as OBJ" msgstr "Exporteer &Toolpaths als OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Toolpaths exporteren als OBJ" - msgid "Open &Slicer" msgstr "Open & Studio" @@ -4881,19 +5461,22 @@ msgid "&View" msgstr "&Bekijken" msgid "&Help" -msgstr "&Help" +msgstr "&Hulp" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "A file exists with the same name: %s. Do you want to override it?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "A config exists with the same name: %s. Do you want to override it?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "" msgid "Overwrite file" msgstr "Bestand overschrijven" +msgid "Overwrite config" +msgstr "" + msgid "Yes to All" msgstr "Ja op alles" @@ -4910,7 +5493,7 @@ msgstr[0] "" msgstr[1] "" msgid "Export result" -msgstr "Export resultaat" +msgstr "Exporteer resultaat" msgid "Select profile to load:" msgstr "Selecteer het te laden profiel:" @@ -4941,13 +5524,13 @@ msgid "Filament Settings" msgstr "Filament instellingen" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Wil je je persoonlijke gegevens van Bambu Cloud synchroniseren? \n" +"Wil je je persoonlijke gegevens van Bambu Cloud synchroniseren?\n" "Het bevat de volgende informatie:\n" "1. Voorinstellingen verwerken\n" "2. Voorinstellingen voor filament\n" @@ -4980,7 +5563,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "De printercamera werkt niet goed." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Er heeft zich een probleem voorgedaan. Werk de printerfirmware bij en " "probeer het opnieuw." @@ -4988,7 +5571,6 @@ msgstr "" msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." msgid "Please enter the IP of printer to connect." msgstr "Voer het IP-adres in van de printer waarmee u verbinding wilt maken." @@ -5000,7 +5582,7 @@ msgid "Connection Failed. Please check the network and try again" msgstr "Verbinding mislukt. Controleer het netwerk en probeer het opnieuw" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Controleer het netwerk en probeer het opnieuw. U kunt de printer opnieuw " @@ -5009,8 +5591,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "De printer is afgemeld en kan geen verbinding maken." -msgid "Stopped." -msgstr "Gestopt." +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN-verbinding mislukt (liveview niet gestart)" @@ -5047,6 +5629,9 @@ msgstr "Informatie" msgid "Playing..." msgstr "Afspelen..." +msgid "Loading..." +msgstr "Laden..." + msgid "Year" msgstr "Jaar" @@ -5065,6 +5650,9 @@ msgstr "Groepeer bestanden per maand, recent eerst." msgid "Show all files, recent first." msgstr "Toon alle bestanden, recentste eerst." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Schakel over naar timelapse bestanden." @@ -5074,8 +5662,8 @@ msgstr "Video" msgid "Switch to video files." msgstr "Schakel over naar videobestanden." -msgid "Switch to 3mf model files." -msgstr "Switch to 3mf model files." +msgid "Switch to 3MF model files." +msgstr "" msgid "Delete selected files from printer." msgstr "Verwijder geselecteerde bestanden van de printer." @@ -5096,14 +5684,10 @@ msgid "Refresh" msgstr "Vernieuwen" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "" msgid "No printers." -msgstr "Geen printers" - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Verbinding mislukt [%d]!" +msgstr "Geen printers." msgid "Loading file list..." msgstr "Bestandslijst laden..." @@ -5112,30 +5696,18 @@ msgid "No files" msgstr "Geen bestanden" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "Initialization failed (Device connection not ready)!" +msgstr "" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Initialisatie is mislukt (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5145,17 +5717,17 @@ msgstr[0] "" msgstr[1] "" msgid "Delete files" -msgstr "Delete files" +msgstr "" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Do you want to delete the file '%s' from printer?" +msgstr "" msgid "Delete file" -msgstr "Delete file" +msgstr "" -msgid "Fetching model infomations ..." -msgstr "Fetching model information..." +msgid "Fetching model information..." +msgstr "" msgid "Failed to fetch model information from printer." msgstr "Mislukt bij het ophalen van modelgegevens van de printer." @@ -5164,8 +5736,8 @@ msgid "Failed to parse model information." msgstr "Mislukt bij het parsen van modelinformatie." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" #, c-format, boost-format @@ -5177,8 +5749,6 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" msgid "Download waiting..." msgstr "Download wacht..." @@ -5196,12 +5766,16 @@ msgstr "Download voltooid" msgid "Downloading %d%%..." msgstr "%d%% downloaden..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." msgstr "Bestand bestaat niet." @@ -5212,15 +5786,49 @@ msgstr "Fout in bestandscontrolesom. Probeer opnieuw." msgid "Not supported on the current printer version." msgstr "Niet ondersteund op de huidige printerversie." -msgid "Storage unavailable, insert SD card." -msgstr "Opslagruimte niet beschikbaar, Micro SD-kaart plaatsen." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Foutcode: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" -msgstr "Snelheid" +msgstr "Snelheid:" msgid "Deadzone:" msgstr "Deadzone:" @@ -5258,14 +5866,87 @@ msgstr "" msgid "Invert Roll axis" msgstr "" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Zoeken" + +msgid "My Device" +msgstr "Mijn apparaat" + +msgid "Other Device" +msgstr "Ander apparaat" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Toegangscode invoeren" + +msgid "Can't find my devices?" +msgstr "Kun je geen apparaten vinden?" + +msgid "Log out successful." +msgstr "Uitloggen gelukt." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Bezet" + +msgid "Modifying the device name" +msgstr "De naam van het apparaat wijzigen" + +msgid "Name is invalid;" +msgstr "Naam is ongeldig;" + +msgid "illegal characters:" +msgstr "niet toegestane karakters:" + +msgid "illegal suffix:" +msgstr "ongeldig achtervoegsel:" + +msgid "The name is not allowed to be empty." +msgstr "Het is niet toegestaand om de naam leeg te laten." + +msgid "The name is not allowed to start with space character." +msgstr "Het is niet toegestaan om een naam met een spatie te laten beginnen." + +msgid "The name is not allowed to end with space character." +msgstr "Het is niet toegestaan om een naam met een spatie te laten eindigen." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Koppelen met pincode" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Print voortgang" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "" msgid "Layer: N/A" -msgstr "Layer: N/A" +msgstr "" msgid "Clear" msgstr "Wissen" @@ -5274,8 +5955,6 @@ msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"You have completed printing the mall model, \n" -"but synchronizing rating information has failed." msgid "How do you like this printing file?" msgstr "Wat vind je van dit afdrukbestand?" @@ -5293,8 +5972,8 @@ msgstr "Tarief" msgid "Camera" msgstr "Camera" -msgid "SD Card" -msgstr "MicroSD-kaart" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Camera-instelling" @@ -5306,74 +5985,77 @@ msgid "Control" msgstr "Besturing" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "" msgid "Print Options" msgstr "Print Opties" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Licht" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Kamer" - msgid "Bed" msgstr "Printbed" msgid "Debug Info" msgstr "Informatie over Debuggen" -msgid "No SD Card" -msgstr "Geen microSD-kaart" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "MicroSD Kaart Abnormaal" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Print annuleren" -msgid "Are you sure you want to cancel this print?" -msgstr "Weet je zeker dat je deze print wilt annuleren?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "De printer is bezig met een andere printtaak." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Downloaden..." msgid "Cloud Slicing..." -msgstr "Cloud Slicing..." +msgstr "" #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "In Cloud Slicing Queue, there are %s tasks ahead of you." +msgstr "" #, c-format, boost-format msgid "Layer: %s" -msgstr "Layer: %s" +msgstr "" #, c-format, boost-format msgid "Layer: %d/%d" -msgstr "Layer: %d/%d" +msgstr "" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Verwarm het mondstuk tot boven de 170 graden voordat u filament laadt of " -"lost." +"Verwarm het mondstuk tot boven de 170°C voordat u filament laadt of lost." -msgid "Still unload" -msgstr "Nog steeds aan het ontladen" - -msgid "Still load" -msgstr "Laad nog steeds" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" -msgstr "Selecteer een AMS-slot voor de kalibratie." +msgstr "Selecteer een AMS-slot voor de kalibratie" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " @@ -5395,10 +6077,21 @@ msgid "Sport" msgstr "Sport" msgid "Ludicrous" -msgstr "Ludicrous" +msgstr "" -msgid "Can't start this without SD card." -msgstr "Kan niet starten zonder microSD-kaart." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Beoordeel het printprofiel" @@ -5421,14 +6114,11 @@ msgstr "Indienen" msgid "Please click on the star first." msgstr "Klik eerst op de ster." -msgid "InFo" -msgstr "Informatie" - msgid "Get oss config failed." msgstr "Het ophalen van de oss-configuratie is mislukt." -msgid "Upload Pictrues" -msgstr "Upload Pictures" +msgid "Upload Pictures" +msgstr "" msgid "Number of images successfully uploaded" msgstr "Aantal afbeeldingen succesvol geüpload" @@ -5442,8 +6132,8 @@ msgstr " upload config prase mislukt\n" msgid " No corresponding storage bucket\n" msgstr " Geen bijbehorende opslag bucket\n" -msgid " can not be opened\n" -msgstr " cannot be opened\n" +msgid " cannot be opened\n" +msgstr "" msgid "" "The following issues occurred during the process of uploading images. Do you " @@ -5469,13 +6159,10 @@ msgid "obtaining instance_id failed\n" msgstr "het verkrijgen van instance_id is mislukt\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " +msgstr "" msgid "error message: " msgstr "foutmelding: " @@ -5483,15 +6170,12 @@ msgstr "foutmelding: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" "Would you like to redirect to the webpage to give a rating?" +msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Sommige afbeeldingen zijn niet geüpload. Wilt u doorverwijzen naar de " "webpagina voor beoordeling?" @@ -5501,7 +6185,7 @@ msgstr "Je kunt tot 16 afbeeldingen selecteren." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." @@ -5509,12 +6193,22 @@ msgstr "" msgid "Status" msgstr "Status" +msgctxt "Firmware" msgid "Update" -msgstr "Updaten" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Niet nogmaals tonen" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s fout" @@ -5542,11 +6236,12 @@ msgstr "%s informatie" msgid "Skip" msgstr "Overslaan" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "Nieuwere versie 3mf" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5556,20 +6251,43 @@ msgstr "" msgid "Download Beta Version" msgstr "Beta-versie downloaden" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " -msgstr "Huidige versie:" +msgstr "Huidige versie: " msgid "Latest Version: " -msgstr "Laatste versie:" +msgstr "Laatste versie: " + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" -msgstr "Not for now" +msgstr "" + +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" msgid "3D Mouse disconnected." msgstr "3D-muis losgekoppeld." @@ -5590,7 +6308,7 @@ msgid "Undo integration was successful." msgstr "Het ongedaan maken van de integratie is gelukt." msgid "New network plug-in available." -msgstr "Nieuwe netwerk plug-in beschikbaar" +msgstr "Nieuwe netwerk plug-in beschikbaar." msgid "Details" msgstr "Détails" @@ -5605,10 +6323,10 @@ msgid "Undo integration failed." msgstr "Het ongedaan maken van de integratie is mislukt." msgid "Exporting." -msgstr "Exporteren" +msgstr "Exporteren." msgid "Software has New version." -msgstr "Er is een update beschikbaar!" +msgstr "Er is een update beschikbaar." msgid "Goto download page." msgstr "Ga naar de download pagina." @@ -5617,7 +6335,7 @@ msgid "Open Folder." msgstr "Open bestandsmap." msgid "Safely remove hardware." -msgstr "Safely remove hardware." +msgstr "" #, c-format, boost-format msgid "%1$d Object has custom supports." @@ -5641,7 +6359,13 @@ msgstr[1] "" #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "" +msgstr[1] "" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgstr[1] "" @@ -5666,7 +6390,7 @@ msgstr "Fout:" msgid "Warning:" msgstr "Waarschuwing:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Succesvol geëxporteerd" msgid "Model file downloaded." @@ -5684,10 +6408,10 @@ msgstr " Klik hier om het te installeren." msgid "WARNING:" msgstr "WAARSCHUWING:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Er zijn delen van het model die support nodig hebben. Zet support aan." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "G-code pad overlap" msgid "Support painting" @@ -5697,7 +6421,7 @@ msgid "Color painting" msgstr "Kleur aanbrengen" msgid "Cut connectors" -msgstr "Cut connectors" +msgstr "" msgid "Layers" msgstr "Lagen" @@ -5737,12 +6461,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Onderste" -msgid "Enable AI monitoring of printing" -msgstr "AI-monitoring van het printen inschakelen" - -msgid "Sensitivity of pausing is" -msgstr "De gevoeligheid van het pauzeren is" - msgid "Enable detection of build plate position" msgstr "Detectie van de positie van de printplaat inschakelen" @@ -5754,36 +6472,109 @@ msgstr "" "gepauzeerd als de tag zich niet binnen het vooraf gedefinieerde bereik " "bevindt." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "AI-monitoring van het printen inschakelen" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Detectie van klontvorming in mondstuk" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Inspectie van de eerste laag" msgid "Auto-recovery from step loss" msgstr "Automatisch herstel na stapverlies" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Promptgeluid toestaan" msgid "Filament Tangle Detect" -msgstr "Filament Tangle Detection" - -msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" +"Controleer of er klonten in het mondstuk zitten door filament of andere " +"vreemde voorwerpen." msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Mondstuk Type" -msgid "Stainless Steel" -msgstr "Roestvrij staal" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Gehard staal" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Roestvrij staal" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Globale" @@ -5818,6 +6609,9 @@ msgstr "" msgid "Lock current plate" msgstr "" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5827,6 +6621,31 @@ msgstr "" msgid "Customize current plate" msgstr "" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " printbed %1%:" @@ -5855,14 +6674,67 @@ msgstr "Geschatte tijd" msgid "Filament changes" msgstr "Filament wisselingen" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Klik om de instelling te veranderen" msgid "Connection" msgstr "Verbinding" -msgid "Bed type" -msgstr "Printbed type" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Volumes schoonmaken" @@ -5885,44 +6757,29 @@ msgstr "Zoek plaat, object en onderdeel." msgid "Pellets" msgstr "" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Geen AMS filamenten. Selecteer een printer in 'Apparaat' pagina om AMS info " -"te laden." - -msgid "Sync filaments with AMS" -msgstr "Synchroniseer filamenten met AMS" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"Door filamenten te synchroniseren met de AMS zullen alle huidige " -"geselecteerde filament presets en kleuren wegvallen. Wilt u doorgaan?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Already did a synchronization; do you want to sync only changes or resync " -"all?" - -msgid "Sync" -msgstr "Sync" - -msgid "Resync" -msgstr "Resync" msgid "There are no compatible filaments, and sync is not performed." msgstr "" "Er zijn geen compatibele filamenten en er wordt geen synchronisatie " "uitgevoerd." +msgid "Sync filaments with AMS" +msgstr "Synchroniseer filamenten met AMS" + msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -5931,15 +6788,15 @@ msgstr "Wilt u de wijzigingen opslaan in \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Succesvol ontkoppeld. Het apparaat %s(%s) kan nu veilig van de computer " "worden verwijderd." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Het uitwerpen van apparaat %s(%s) is mislukt." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "" @@ -5953,18 +6810,18 @@ msgid "" "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"The current heatbed temperature is relatively high. The nozzle may clog when " -"printing this filament in a closed environment. Please open the front door " -"and/or remove the upper glass." +"De huidige warmtebedtemperatuur is relatief hoog. Het mondstuk kan verstopt " +"raken bij het printen van dit filament in een gesloten omgeving. Open de " +"voordeur en/of verwijder het bovenste glas." msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"De door het filament vereiste hardheid van de nozzle is hoger dan de " -"standaard hardheid van de nozzle van de printer. Vervang de geharde nozzle " -"of het filament, anders raakt de nozzle versleten of beschadigd." +"De door het filament vereiste hardheid van het mondstuk is hoger dan de " +"standaard hardheid van het mondstuk van de printer. Vervang het geharde " +"mondstuk of het filament, anders raakt het mondstuk versleten of beschadigd." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " @@ -5974,29 +6831,49 @@ msgstr "" "het oppervlak veroorzaken. Het wordt aanbevolen om over te schakelen naar de " "vloeiende modus." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Zijbalk uitklappen" msgid "Collapse sidebar" msgstr "Zijbalk inklappen" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Bestand laden: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -"De 3mf is niet van Snapmaker Orca, er worden alleen geometriegegevens geladen." +"De 3MF is niet van Snapmaker Orca, er worden alleen geometriegegevens geladen." -msgid "Load 3mf" -msgstr "Laad 3mf" +msgid "Load 3MF" +msgstr "Laad 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"Versie %s van de 3mf is nieuwer dan versie %s van %s. De volgende sleutels " +"Versie %s van de 3MF is nieuwer dan versie %s van %s. De volgende sleutels " "worden niet herkend:" msgid "You'd better upgrade your software.\n" @@ -6004,38 +6881,44 @@ msgstr "U dient de software te upgraden.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Versie %s van de 3mf is nieuwer dan versie %s van %s. Wij stellen voor om uw " +"Versie %s van de 3MF is nieuwer dan versie %s van %s. Wij stellen voor om uw " "software te upgraden." -msgid "Invalid values found in the 3mf:" -msgstr "Invalid values found in the 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "" msgid "Please correct them in the param tabs" -msgstr "Please correct them in the Param tabs" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "The 3mf has following modified G-code in filament or printer presets:" +msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "" + +msgid "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Controleer of deze aangepaste G-codes veilig zijn om schade aan de machine " "te voorkomen!" -msgid "Modified G-codes" -msgstr "Modified G-code" - -msgid "The 3mf has following customized filament or printer presets:" +msgid "Modified G-code" msgstr "" -"De 3mf heeft de volgende aangepaste voorinstellingen voor filament of " + +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "" +"De 3MF heeft de volgende aangepaste voorinstellingen voor filament of " "printer:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Controleer of de G-codes in deze presets veilig zijn om schade aan de " @@ -6044,7 +6927,8 @@ msgstr "" msgid "Customized Preset" msgstr "Aangepaste voorinstelling" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Naam van componenten in step-bestand is niet UTF8-formaat!" msgid "The name may show garbage characters!" @@ -6053,7 +6937,7 @@ msgstr "" "verschijnen!" msgid "Remember my choice." -msgstr "Remember my choice." +msgstr "" #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." @@ -6072,7 +6956,7 @@ msgid "" " Do you want to scale to millimeters?" msgstr "" "Het object uit bestand %s is erg klein, en misschien in meters of inches.\n" -" Wil je schalen naar millimeters?" +" Wil je schalen naar millimeters?" msgid "Object too small" msgstr "He tobject is te klein" @@ -6098,12 +6982,22 @@ msgstr "" msgid "Object with multiple parts was detected" msgstr "Er is een object met meerdere onderdelen gedetecteerd" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Het bestand bevat geen geometriegegevens." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Uw object lijkt te groot. Wilt u het verkleinen zodat het automatisch op het " "printbed past?" @@ -6128,23 +7022,18 @@ msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" -"The file %s already exists.\n" -"Do you want to replace it?" msgid "Confirm Save As" msgstr "Opslaan als bevestigen" msgid "Delete object which is a part of cut object" -msgstr "Delete object which is a part of cut object" +msgstr "" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"You are trying to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that, model consistency can't be guaranteed." msgid "The selected object couldn't be split." msgstr "Het geselecteerde object kan niet opgesplitst worden." @@ -6167,11 +7056,39 @@ msgstr "Selecteer een nieuw bestand" msgid "File for the replace wasn't selected" msgstr "Het bestand voor de vervanging is niet geselecteerd" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Selecteer een bestand" msgid "Do you want to replace it" -msgstr "Do you want to replace it?" +msgstr "Wilt u deze vervangen?" msgid "Message" msgstr "Bericht" @@ -6212,12 +7129,23 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Voorvertoning modus:\n" "Het geladen bestand bevat alleen G-code, hierdoor is het niet mogelijk om " "naar de pagina Voorbereiden schakelen." +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project of ze " @@ -6244,17 +7172,17 @@ msgstr "Project opslaan" msgid "Importing Model" msgstr "Model importeren" -msgid "prepare 3mf file..." -msgstr "voorbereiden van 3mf bestand..." +msgid "prepare 3MF file..." +msgstr "voorbereiden van 3MF bestand..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "project downloaden..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "" #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6265,14 +7193,24 @@ msgid "" "import it." msgstr "" +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "Importeer SLA-archief" msgid "The selected file" msgstr "Het geselecteerde bestand" -msgid "does not contain valid gcode." -msgstr "Bevat geen geldige Gcode" +msgid "does not contain valid G-code." +msgstr "Bevat geen geldige G-code" msgid "Error occurs while loading G-code file" msgstr "Er is een fout opgetreden tijdens het laden van het G-codebestand." @@ -6280,16 +7218,18 @@ msgstr "Er is een fout opgetreden tijdens het laden van het G-codebestand." #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "" +msgstr "Het laden van een ZIP-archief op pad %1% is mislukt." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" -msgstr "" +msgstr "Kan het bestand niet uitpakken naar %1%: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "" +"Kan het uitgepakte bestand op %1% niet vinden. Het uitpakken van het bestand " +"is mislukt." msgid "Drop project file" msgstr "Projectbestand neerzetten" @@ -6309,10 +7249,10 @@ msgstr "Er kan slechts 1 G-code bestand tegelijkertijd geopend worden." msgid "G-code loading" msgstr "G-Code wordt geladen" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G-Code bestanden en modellen kunnen niet tegelijk geladen worden!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Modellen kunnen niet worden toegevoegd in voorbeeldmodus" msgid "All objects will be removed, continue?" @@ -6352,44 +7292,37 @@ msgstr "" "Het bestand %s is naar de opslagruimte van de printer gestuurd en kan op de " "printer worden bekeken." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6397,6 +7330,9 @@ msgstr "" msgid "Upload and Print" msgstr "Upload en print" +msgid "Abnormal print file data. Please slice again" +msgstr "Abnormale printbestand. Slice opnieuw" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6416,17 +7352,42 @@ msgstr "" "Handmatig aangebrachte support en kleuren zijn verwijderd voor het repareren." msgid "Optimize Rotation" +msgstr "Optimaliseer rotatie" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." msgstr "" -msgid "Invalid number" -msgstr "Ongeldig nummer" +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" -msgstr "Plate Settings" +msgstr "" #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "Number of currently selected parts: %1%\n" +msgstr "" #, boost-format msgid "Number of currently selected objects: %1%\n" @@ -6460,23 +7421,45 @@ msgstr "Volume: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Driehoeken: %1%\n" -msgid "Tips:" -msgstr "Tips:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" +"De functie \"Model repareren\" is momenteel alleen beschikbaar op Windows. " +"Repareer het model met Snapmaker Orca (Windows) of andere CAD-software." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Plate% d: %s is not suggested for use printing filament %s(%s). If you still " -"want to do this print job, please set this filament's bed temperature to a " -"number that is not zero." msgid "Switching the language requires application restart.\n" msgstr "" @@ -6496,39 +7479,6 @@ msgstr "" msgid "Changing application language" msgstr "Taal van de applicatie wijzigen" -msgid "Changing the region will log out your account.\n" -msgstr "Als u de regio wijzigt, wordt u afgemeld bij uw account.\n" - -msgid "Region selection" -msgstr "Regio selectie" - -msgid "Second" -msgstr "Seconde" - -msgid "Browse" -msgstr "Browsen" - -msgid "Choose Download Directory" -msgstr "Kies Downloadmap" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "Algemene instellingen" - msgid "Asia-Pacific" msgstr "Azië-Pacific" @@ -6544,25 +7494,59 @@ msgstr "Noord-Amerika" msgid "Others" msgstr "Andere" -msgid "Login Region" -msgstr "Inlogregio" +msgid "Changing the region will log out your account.\n" +msgstr "Als u de regio wijzigt, wordt u afgemeld bij uw account.\n" -msgid "Stealth Mode" +msgid "Region selection" +msgstr "Regio selectie" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "De periode van de back-up in seconden." + +msgid "Bed Temperature Difference Warning" msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -msgid "Enable network plugin" +msgid "Browse" +msgstr "Browsen" + +msgid "Choose folder for downloaded items" msgstr "" -msgid "Check for stable updates only" -msgstr "" +msgid "Choose Download Directory" +msgstr "Kies Downloadmap" + +msgid "Associate" +msgstr "Associeer" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "met Snapmaker Orca zodat Orca modellen kan openen van" + +msgid "Current Association: " +msgstr "Huidige associatie: " + +msgid "Current Instance" +msgstr "Huidige instantie" + +msgid "Current Instance Path: " +msgstr "Huidig instancepad: " + +msgid "General" +msgstr "Algemeen" msgid "Metric" -msgstr "Metriek" +msgstr "Metrisch" msgid "Imperial" msgstr "Imperiaal" @@ -6570,15 +7554,27 @@ msgstr "Imperiaal" msgid "Units" msgstr "Eenheden" +msgid "Home" +msgstr "Thuis" + +msgid "Default page" +msgstr "Startpagina" + +msgid "Set the page opened on startup." +msgstr "Stel de pagina in die wordt geopend bij het opstarten." + +msgid "Enable dark mode" +msgstr "Donkere modus inschakelen" + msgid "Allow only one Snapmaker Orca instance" -msgstr "" +msgstr "Sta slechts één Snapmaker Orca-instantie toe" msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"Op OSX is er standaard altijd maar één instantie van een app actief. Het is " +"In OSX is er standaard altijd maar één instantie van een app actief. Het is " "echter toegestaan om meerdere instanties van dezelfde app uit te voeren " "vanaf de opdrachtregel. In dat geval staat deze instelling slechts één " "instantie toe." @@ -6588,37 +7584,142 @@ msgid "" "same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" +"Als deze optie is ingeschakeld, wordt Snapmaker Orca opnieuw geactiveerd wanneer " +"er al een ander exemplaar van Snapmaker Orca is gestart." -msgid "Home" -msgstr "Thuis" +msgid "Show splash screen" +msgstr "Toon startscherm" -msgid "Default Page" +msgid "Show the splash screen during startup." +msgstr "Toon het opstartscherm tijdens het opstarten." + +msgid "Downloads folder" msgstr "" -msgid "Set the page opened on startup." +msgid "Target folder for downloaded items" msgstr "" +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Geen waarschuwingen bij het laden van 3MF met aangepaste G-codes" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Automatisch een back-up maken" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Maak regelmatig een back-up van uw project, zodat u het kunt herstellen na " +"een incidentele crash." + +msgid "Preset" +msgstr "Voorinstelling" + +msgid "Remember printer configuration" +msgstr "Printerconfiguratie onthouden" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Als dit is ingeschakeld, onthoudt Orca automatisch de filament-/" +"procesconfiguratie voor elke printer en schakelt deze automatisch om." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Beheer van meerdere apparaten" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Alles" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Plaat automatisch rangschikken na het klonen" + msgid "Touchpad" -msgstr "" +msgstr "Touchpad" msgid "Camera style" -msgstr "" +msgstr "Camera stijl" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +"Selecteer cameranavigatiestijl.\n" +"Standaard: LMB+bewegen voor rotatie, RMB/MMB+bewegen voor pannen.\n" +"Touchpad: Alt+bewegen voor rotatie, Shift+bewegen voor pannen." + +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" msgid "Zoom to mouse position" -msgstr "Zoom to mouse position" +msgstr "Zoomen naar muispositie" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." +"Zoom in op de positie van de muisaanwijzer in de 3D-weergave, in plaats van " +"op het midden van het venster." msgid "Use free camera" msgstr "Gebruik vrij beweegbare camera" @@ -6628,159 +7729,172 @@ msgstr "" "Als dit is ingeschakeld wordt de vrij beweegbare camera gebruikt, anders een " "vaste camera." -msgid "Reverse mouse zoom" +msgid "Swap pan and rotate mouse buttons" +msgstr "Wissel de pan- en rotatiemuisknoppen om" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." msgstr "" +"Als deze optie is ingeschakeld, worden de pan- en rotatiefuncties van de " +"linker- en rechtermuisknop omgedraaid." + +msgid "Reverse mouse zoom" +msgstr "Omgekeerde muiszoom" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" +"Als deze optie is ingeschakeld, wordt de zoomrichting met het muiswiel " +"omgedraaid." -msgid "Show splash screen" -msgstr "Toon startscherm" - -msgid "Show the splash screen during startup." +msgid "Clear my choice on..." msgstr "" -msgid "Show \"Tip of the day\" notification after start" -msgstr "Toon de melding 'Tip van de dag' na het starten" - -msgid "If enabled, useful hints are displayed at startup." +msgid "Unsaved projects" msgstr "" -"Indien ingeschakeld, worden bij het opstarten nuttige tips weergegeven." -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Clear my choice on the unsaved projects." +msgstr "Wis keuze voor niet-opgeslagen projecten." + +msgid "Unsaved presets" msgstr "" -"Spoelvolumes: Automatisch berekenen telkens wanneer de kleur verandert." -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "" -"Als deze optie is ingeschakeld, wordt elke keer dat de kleur verandert " -"automatisch berekend." +msgid "Clear my choice on the unsaved presets." +msgstr "Wis keuze voor niet-opgeslagen presets." -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" +msgid "Synchronizing printer preset" msgstr "" msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" +msgid "Login region" +msgstr "Inlogregio" + +msgid "Stealth mode" +msgstr "Stealth modus" msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." +"Hiermee wordt het versturen van gegevens naar Bambu's cloudservices gestopt. " +"Gebruikers die geen BambuLab-machines gebruiken of alleen de LAN-modus " +"gebruiken, kunnen deze functie veilig inschakelen." -msgid "Network" -msgstr "Netwerk" +msgid "Network test" +msgstr "Netwerktest" -msgid "Auto sync user presets(Printer/Filament/Process)" +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Alleen op stabiele updates controleren" + +msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "" "Gebruikersvoorinstellingen automatisch synchroniseren (printer/filament/" "proces)" -msgid "User Sync" -msgstr "Gebruiker synchroniseren" - msgid "Update built-in Presets automatically." -msgstr "Update built-in presets automatically." +msgstr "Ingebouwde voorinstellingen automatisch bijwerken." -msgid "System Sync" -msgstr "System Sync" +msgid "Network plugin" +msgstr "" -msgid "Clear my choice on the unsaved presets." -msgstr "Clear my choice on the unsaved presets." +msgid "Enable network plugin" +msgstr "Netwerkplug-in inschakelen" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" msgid "Associate files to Snapmaker Orca" msgstr "Koppel bestanden aan Snapmaker Orca" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Koppel .3mf-bestanden aan Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Indien ingeschakeld, wordt Snapmaker Orca ingesteld als de standaardtoepassing " "om .3mf-bestanden te openen" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Koppel .stl-bestanden aan Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Indien ingeschakeld, wordt Snapmaker Orca ingesteld als de standaardtoepassing " "om .stl-bestanden te openen" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Koppel .step/.stp bestanden aan Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Indien ingeschakeld, wordt Snapmaker Orca ingesteld als de standaardtoepassing " "om .step-bestanden te openen" msgid "Associate web links to Snapmaker Orca" +msgstr "Koppel weblinks aan Snapmaker Orca" + +msgid "Developer" msgstr "" -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "Maximum recent projects" - -msgid "Maximum count of recent projects" -msgstr "Maximum count of recent projects" - -msgid "Clear my choice on the unsaved projects." -msgstr "Clear my choice on the unsaved projects." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No warnings when loading 3MF with modified G-code" - -msgid "Auto-Backup" -msgstr "Automatisch backup maken" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Backup your project periodically to help with restoring from an occasional " -"crash." - -msgid "every" -msgstr "every" - -msgid "The peroid of backup in seconds." -msgstr "The period of backup in seconds." - -msgid "Downloads" -msgstr "Downloads" - -msgid "Dark Mode" -msgstr "Donkere modus" - -msgid "Enable Dark mode" -msgstr "Donkere modus inschakelen" - msgid "Develop mode" msgstr "Ontwikkelmodus" msgid "Skip AMS blacklist check" -msgstr "Skip AMS blacklist check" +msgstr "AMS-zwartelijstcontrole overslaan" -msgid "Home page and daily tips" -msgstr "Startpagina en dagelijkse tips" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Toon startpagina bij opstanden" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "" + +msgid "fatal" +msgstr "fataal" + +msgid "error" +msgstr "fout" + +msgid "warning" +msgstr "waarschuwing" + +msgid "debug" +msgstr "debug" + +msgid "trace" +msgstr "trace" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Synchroniseer instellingen" @@ -6813,31 +7927,13 @@ msgid "Mouse wheel reverses when zooming" msgstr "Omgekeerde scrollrichting tijdens het zoomen" msgid "Enable SSL(MQTT)" -msgstr "Enable SSL(MQTT)" +msgstr "" msgid "Enable SSL(FTP)" -msgstr "Enable SSL(FTP)" +msgstr "" msgid "Internal developer mode" -msgstr "Internal developer mode" - -msgid "Log Level" -msgstr "Log level" - -msgid "fatal" -msgstr "Fataal" - -msgid "error" -msgstr "Fout" - -msgid "warning" -msgstr "waarschuwing" - -msgid "debug" -msgstr "Debuggen" - -msgid "trace" -msgstr "Traceren" +msgstr "" msgid "Host Setting" msgstr "Host-instelling" @@ -6855,15 +7951,15 @@ msgid "Product host" msgstr "Producthost" msgid "debug save button" -msgstr "Debuggen opslaan knop" +msgstr "debug opslaan knop" msgid "save debug settings" -msgstr "Bewaar debug instellingen" +msgstr "bewaar debug instellingen" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "De debug instellingen zijn succesvol opgeslagen!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Cloudomgeving geschakeld; log alsjeblieft nogmaals in!" msgid "System presets" @@ -6875,14 +7971,20 @@ msgstr "Gebruikersvoorinstellingen" msgid "Incompatible presets" msgstr "Onbruikbare voorinstellingen" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS-filament" -msgid "Click to pick filament color" -msgstr "Klik om de filament kleur te kiezen" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Please choose the filament color" +msgid "Click to select filament color" +msgstr "Klik om de filament kleur te kiezen" msgid "Add/Remove presets" msgstr "Voorinstellingen toevoegen/verwijderen" @@ -6893,47 +7995,68 @@ msgstr "Voorinstelling bewerken" msgid "Project-inside presets" msgstr "Voorinstellingen binnen project" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Filament toevoegen/verwijderen" msgid "Add/Remove materials" msgstr "Materialen toevoegen/verwijderen" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Printers selecteren/verwijderen (systeemvoorinstellingen)" msgid "Create printer" msgstr "Printer maken" +msgid "Empty" +msgstr "Leeg" + +msgid "Incompatible" +msgstr "" + msgid "The selected preset is null!" msgstr "De geselecteerde preset is nul!" msgid "End" -msgstr "End" +msgstr "" msgid "Customize" msgstr "Aanpassen" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "Filamentvolgorde van andere lagen" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "Voer de laagwaarde in (>= 2)." msgid "Plate name" -msgstr "Plate name" +msgstr "Plaat naam" + +msgid "Same as Global Plate Type" +msgstr "" + +msgid "Bed type" +msgstr "Printbed type" msgid "Same as Global Print Sequence" -msgstr "Same as Global Print Sequence" +msgstr "" msgid "Print sequence" msgstr "Afdrukvolgorde" msgid "Same as Global" -msgstr "Same as Global" +msgstr "Hetzelfde als globaal" msgid "Disable" -msgstr "Disable" +msgstr "Uitschakelen" msgid "Spiral vase" msgstr "Spiraalvaas" @@ -6941,52 +8064,49 @@ msgstr "Spiraalvaas" msgid "First layer filament sequence" msgstr "Eerste laag filamentvolgorde" -msgid "Same as Global Plate Type" -msgstr "Same as Global Plate Type" - msgid "Same as Global Bed Type" msgstr "Hetzelfde als Global Bed Type" msgid "By Layer" -msgstr "By Layer" +msgstr "Op laag" msgid "By Object" -msgstr "By Object" +msgstr "Op object" msgid "Accept" -msgstr "Accept" +msgstr "Accepteer" msgid "Log Out" -msgstr "Log Out" +msgstr "Uitloggen" msgid "Slice all plate to obtain time and filament estimation" msgstr "" "Slice alle printbedden om een inschatting te krijgen van de printtijd en het " "filamentverbruik" -msgid "Packing project data into 3mf file" -msgstr "De projectdata wordt opgelslagen in een 3mf bestand" +msgid "Packing project data into 3MF file" +msgstr "De projectdata wordt opgelslagen in een 3MF bestand" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "3mf bestand uploaden" msgid "Jump to model publish web page" msgstr "Ga naar de website om het model te publiceren" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Notitie: het voorbereiden kan enkele minuten duren. Even geduld alstublieft." msgid "Publish" msgstr "Publiceren" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Het publiceren is geannuleerd" msgid "Slicing Plate 1" msgstr "Slicing printbed 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "De data wordt opgeslagen in een 3mf" msgid "Jump to webpage" @@ -7000,25 +8120,27 @@ msgid "User Preset" msgstr "Gebruikersvoorinstelling" msgid "Preset Inside Project" -msgstr "Voorinstelling Project Inside" +msgstr "Voorinstelling binnen project" msgid "Name is unavailable." msgstr "Naam is niet beschikbaar." -msgid "Overwrite a system profile is not allowed" -msgstr "Het overschrijven van een systeem profiel is niet toegestaand" +msgid "Overwriting a system profile is not allowed." +msgstr "Het overschrijven van een systeem profiel is niet toegestaan" #, boost-format msgid "Preset \"%1%\" already exists." msgstr "Voorinstelling \"%1%\" bestaat al." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" "Voorinstelling \"%1%\" bestaat al en is niet compatibel met de huidige " "printer." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "Let er aub op dat opslaan de voorinstelling zal overschrijven" msgid "The name cannot be the same as a preset alias name." @@ -7031,7 +8153,7 @@ msgstr "Bewaar voorinstelling" msgctxt "PresetName" msgid "Copy" -msgstr "Kopie" +msgstr "Kopiëren" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" @@ -7057,120 +8179,87 @@ msgstr "Schakel eenvoudig over naar \"%1%\"" msgid "Task canceled" msgstr "Taak geannuleerd" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Zoeken" - -msgid "My Device" -msgstr "Mijn apparaat" - -msgid "Other Device" -msgstr "Ander apparaat" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Toegangscode invoeren" - -msgid "Can't find my devices?" -msgstr "Kun je geen apparaten vinden?" - -msgid "Log out successful." -msgstr "Uitloggen gelukt." - -msgid "Busy" -msgstr "Bezet" - msgid "Bambu Cool Plate" -msgstr "Bambu Cool (koude) Plate" +msgstr "Bambu koelplaat" msgid "PLA Plate" -msgstr "PLA Plate" +msgstr "PLA plaat" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering (technische) plate" +msgstr "Bambu Engineering plaat" msgid "Bambu Smooth PEI Plate" -msgstr "" +msgstr "Bambu gladde PEI-plaat" msgid "High temperature Plate" -msgstr "Plaat op hoge temperatuur" +msgstr "Hoge temperatuur plaat" msgid "Bambu Textured PEI Plate" +msgstr "Bambu getextureerde PEI-plaat" + +msgid "Bambu Cool Plate SuperTack" msgstr "" -msgid "Send print job to" -msgstr "Stuur de printtaak naar" +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Kalibratie van Flow Dynamics" -msgid "Click here if you can't connect to the printer" -msgstr "Klik hier als je geen verbinding kunt maken met de printer" - -msgid "send completed" -msgstr "Versturen gelukt" - -msgid "Error code" -msgstr "Error code" - -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Geen login-account, alleen printers in LAN-modus worden weergegeven" - -msgid "Connecting to server" -msgstr "Verbinding maken met server" - -msgid "Synchronizing device information" -msgstr "Informatie over het apparaat synchroniseren" - -msgid "Synchronizing device information time out" -msgstr "Time-out tijdens synchronisatie van apparaatinformatie" - -msgid "Cannot send the print job when the printer is updating firmware" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" msgstr "" -"Kan geen printopdracht verzenden terwijl de printer bezig is met het updaten " -"van de firmware" msgid "" -"The printer is executing instructions. Please restart printing after it ends" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" -"De printer is instructies aan het uitvoeren. Begin opnieuw met printen nadat " -"dit is voltooid" -msgid "The printer is busy on other print job" -msgstr "De printer is bezig met een andere printtaak." +msgid "send completed" +msgstr "versturen gelukt" + +msgid "Error code" +msgstr "" + +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s overschrijdt het aantal AMS-sleuven. Update de firmware van de " -"printer om de toewijzing van AMS-sleuven te ondersteunen." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Het filament overschrijdt het aantal AMS-sleuven. Update de firmware van de " -"printer om de toewijzing van AMS-sleuven te ondersteunen." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"De toewijzingen van filamenten aan AMS-slots zijn vastgesteld. U kunt op een " -"filament hierboven klikken om de toewijzing van het AMS slot te wijzigen" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Klik op elk filament hierboven om de bijbehorende AMS-sleuf op te geven " -"voordat u de printopdracht verzendt" #, c-format, boost-format msgid "" @@ -7187,69 +8276,41 @@ msgstr "" "Het filament komt niet overeen met het filament in de AMS-sleuf. Update de " "firmware van de printer om de toewijzing van AMS-sleuven te ondersteunen." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"De firmware van de printer ondersteunt alleen sequentiële toewijzing van " -"filament => AMS-sleuf." - -msgid "An SD card needs to be inserted before printing." -msgstr "Er moet een MicroSD-kaart worden geplaatst voordat u kunt afdrukken." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "" -"Er moet een MicroSD-kaart worden geplaatst om een timelapse op te nemen." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Kan de printopdracht niet naar een printer sturen waarvan de firmware moet " -"worden bijgewerkt." - -msgid "Cannot send the print job for empty plate" -msgstr "Kan geen afdruktaak verzenden voor een lege plaat." - -msgid "This printer does not support printing all plates" -msgstr "" -"Deze printer biedt geen ondersteuning voor het afdrukken van alle platen" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"When spiral vase mode is enabled, machines with I3 structure will not " -"generate timelapse videos." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse wordt niet ondersteund omdat Afdruksequentie is ingesteld op \"Per " -"object\"." msgid "Errors" msgstr "Fouten" -msgid "Please check the following:" -msgstr "Please check the following:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " @@ -7260,62 +8321,221 @@ msgstr "" "vereiste filamenten zijn. Als ze in orde zijn, klikt u op \"Bevestigen\" om " "het afdrukken te starten." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "mondstuk in voorinstelling: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "mondstuk onthouden: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" +msgstr "Controleer het volgende:" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "" -"Please click the confirm button if you still want to proceed with printing." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Aansluiten op de printer. Kan niet annuleren tijdens het verbindingsproces." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Let op bij gebruik! Flowkalibratie op de PEI-plaat met structuur kan " -"mislukken vanwege het verstrooide oppervlak." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatic flow calibration using the Micro Lidar" +msgid "Preparing print job" +msgstr "Print opdracht voorbereiden" -msgid "Modifying the device name" -msgstr "De naam van het apparaat wijzigen" +msgid "The name length exceeds the limit." +msgstr "" -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Verzenden naar de MicroSD-kaart in de printer" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Klik hier als je geen verbinding kunt maken met de printer" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Geen login-account, alleen printers in LAN-modus worden weergegeven" + +msgid "Connecting to server..." +msgstr "Verbinding maken met server" + +msgid "Synchronizing device information..." +msgstr "Informatie over het apparaat synchroniseren" + +msgid "Synchronizing device information timed out." +msgstr "Time-out tijdens synchronisatie van apparaatinformatie" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Kan geen printopdracht verzenden terwijl de printer bezig is met het updaten " +"van de firmware" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"De printer is instructies aan het uitvoeren. Begin opnieuw met printen nadat " +"dit is voltooid" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Kan de printopdracht niet naar een printer sturen waarvan de firmware moet " +"worden bijgewerkt." + +msgid "Cannot send a print job for an empty plate." +msgstr "Kan geen afdruktaak verzenden voor een lege plaat" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "" +"Deze printer biedt geen ondersteuning voor het afdrukken van alle platen" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Kan de printtaak niet verzenden wanneer de upgrade wordt uitgevoerd" @@ -7325,47 +8545,44 @@ msgstr "" "De geselecteerde printer is niet compatibel met de gekozen " "printervoorinstellingen." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"A MicroSD card needs to be inserted before sending to the printer SD card." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "De printer moet zich in hetzelfde LAN bevinden als Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." +msgid "The printer does not support sending to printer storage." msgstr "" -"De printer biedt geen ondersteuning voor het verzenden naar de microSD-kaart " -"van de printer." msgid "Slice ok." -msgstr "Slice gelukt" +msgstr "Slice gelukt." msgid "View all Daily tips" msgstr "Bekijk alle dagelijkse tips" msgid "Failed to create socket" -msgstr "Failed to create socket" +msgstr "Kan socket niet maken" msgid "Failed to connect socket" -msgstr "Failed to connect socket" +msgstr "Kan niet verbinden met socket" msgid "Failed to publish login request" -msgstr "Failed to publish login request" +msgstr "Kan loginverzoek niet publiceren" msgid "Get ticket from device timeout" -msgstr "Timeout getting ticket from device" +msgstr "Time-out bij het ophalen van ticket van apparaat" msgid "Get ticket from server timeout" -msgstr "Timeout getting ticket from server" +msgstr "Time-out bij het ophalen van ticket van server" msgid "Failed to post ticket to server" -msgstr "Failed to post ticket to server" +msgstr "Het is niet gelukt om het ticket naar de server te plaatsen" msgid "Failed to parse login report reason" -msgstr "Failed to parse login report reason" +msgstr "Kan de reden van het loginrapport niet parseren" msgid "Receive login report timeout" -msgstr "Receive login report timeout" +msgstr "Time-out voor loginrapport ontvangen" msgid "Unknown Failure" msgstr "Onbekende fout" @@ -7374,63 +8591,58 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." +"Zoek de pincode op de accountpagina op het printerscherm,\n" +" en typ hieronder de pincode." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "Pincode niet gevonden?" msgid "Pin Code" -msgstr "Pin Code" +msgstr "Pincode" msgid "Binding..." -msgstr "Binding..." +msgstr "" msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "Bevestig dit op het printerscherm" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "Inloggen mislukt. Controleer de pincode." msgid "Log in printer" msgstr "Inloggen op printer" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Wil je met het huidige account inloggen op de printer?" msgid "Check the reason" -msgstr "Check the reason" +msgstr "Controleer de reden" msgid "Read and accept" -msgstr "Read and accept" +msgstr "Lezen en accepteren" msgid "Terms and Conditions" -msgstr "Terms and Conditions" +msgstr "Algemene voorwaarden" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " "device, please read the terms and conditions. By clicking to agree to use " "your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " "Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" msgid "and" -msgstr "and" +msgstr "en" msgid "Privacy Policy" -msgstr "Privacy Policy" +msgstr "Privacybeleid" msgid "We ask for your help to improve everyone's printer" -msgstr "We ask for your help to improve everyone's printer" +msgstr "" msgid "Statement about User Experience Improvement Program" -msgstr "Statement about User Experience Improvement Program" +msgstr "" #, c-format, boost-format msgid "" @@ -7440,26 +8652,15 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." msgid "Statement on User Experience Improvement Plan" -msgstr "Statement on User Experience Improvement Plan" +msgstr "" msgid "Log in successful." msgstr "Inloggen gelukt." @@ -7498,7 +8699,7 @@ msgstr "" "voorinstelling." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Een Prime-toren is vereist voor een vloeiende timeplase-modus. Er kunnen " @@ -7506,7 +8707,22 @@ msgstr "" "prime-toren wilt uitschakelen?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "Een prime-toren is vereist voor een vloeiende timelapse-modus. Er kunnen " @@ -7517,67 +8733,71 @@ msgid "Still print by object?" msgstr "Print je nog steeds per object?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"We hebben een experimentele stijl toegevoegd, „Tree Slim”, met een kleiner " -"ondersteuningsvolume maar een zwakkere sterkte.\n" -"We raden aan om het te gebruiken met: 0 interfacelagen, 0 bovenafstand, 2 " -"muren." msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Deze instellingen automatisch wijzigen? \n" -"Ja - Wijzig deze instellingen automatisch.\n" -"Nee - Wijzig deze instellingen niet voor mij." +"Deze instellingen automatisch wijzigen?\n" +"Ja - Wijzig deze instellingen automatisch\n" +"Nee - Wijzig deze instellingen niet voor mij" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Voor de stijlen „Tree Strong” en „Tree Hybrid” raden we de volgende " -"instellingen aan: ten minste 2 interfacelagen, ten minste 0,1 mm op z " -"afstand of gebruik support materiaal op de interface." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"When using support material for the support interface, we recommend the " -"following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" msgid "" "Enabling this option will modify the model's shape. If your print requires " "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" +"Als u deze optie inschakelt, wordt de vorm van het model aangepast. Als uw " +"afdruk precieze afmetingen vereist of deel uitmaakt van een samenstelling, " +"is het belangrijk om te controleren of deze geometrie verandering van " +"invloed is op de functionaliteit van uw afdruk." msgid "Are you sure you want to enable this option?" +msgstr "Weet u zeker dat u deze optie wilt inschakelen?" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" msgstr "" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" +"Laaghoogte is te klein.\n" +"Het zal worden ingesteld op min_layer_height\n" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "De laaghoogte overschrijdt de limiet in Printerinstellingen -> Extruder -> " "Laaghoogtelimieten, dit kan problemen met de afdrukkwaliteit veroorzaken." -msgid "Adjust to the set range automatically? \n" -msgstr "Automatisch aanpassen aan het ingestelde bereik? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Automatisch aanpassen aan het ingestelde bereik?\n" msgid "Adjust" msgstr "Aanpassen" @@ -7587,25 +8807,26 @@ msgstr "Negeer" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" +"Experimentele functie: Het filament op grotere afstand terugtrekken en " +"afsnijden tijdens filamentwisselingen om flush te minimaliseren. Hoewel het " +"het doorspoelen aanzienlijk kan verminderen, kan het ook het risico op een " +"verstopt mondstuk of andere printcomplicaties vergroten." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" +"Experimentele functie: Het filament op grotere afstand terugtrekken en " +"afsnijden tijdens filamentwisselingen om flush te minimaliseren. Hoewel het " +"het doorspoelen aanzienlijk kan verminderen, kan het ook het risico op een " +"verstopt mondstuk of andere printcomplicaties vergroten. Gebruik dit met de " +"nieuwste printerfirmware." msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7618,6 +8839,81 @@ msgstr "" "door met de rechtermuisknop op de lege positie van de bouwplaat te klikken " "en „Add Primitive” ->\"Timelapse Wipe Tower” te kiezen." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Een kopie van de huidige systeempreset wordt aangemaakt. Deze wordt " +"ontkoppeld van het origineel." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "De huidige custom preset wordt ontkoppeld van de originele preset." + +msgid "Modifications to the current profile will be saved." +msgstr "Aanpassingen aan het huidige profiel worden opgeslagen." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Deze actie is niet terug te draaien.\n" +"Wilt u doorgaan?" + +msgid "Detach preset" +msgstr "Ontkoppel preset" + +msgid "This is a default preset." +msgstr "Dit is een standaard preset." + +msgid "This is a system preset." +msgstr "Dit is een systeempreset." + +msgid "Current preset is inherited from the default preset." +msgstr "Huidige preset is gebaseerd op de standaard preset." + +msgid "Current preset is inherited from" +msgstr "Huidige preset is afgeleid van" + +msgid "It can't be deleted or modified." +msgstr "Kan niet verwijderd of aangepast worden." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Eventuele wijzigingen moet worden opgeslagen als een nieuwe preset die is " +"gebaseerd op de huidige." + +msgid "To do that please specify a new name for the preset." +msgstr "Geef daarvoor een nieuwe naam aan de preset." + +msgid "Additional information:" +msgstr "Overige informatie:" + +msgid "vendor" +msgstr "leverancier" + +msgid "printer model" +msgstr "printermodel" + +msgid "default print profile" +msgstr "standaard printprofiel" + +msgid "default filament profile" +msgstr "standaard filamentprofiel" + +msgid "default SLA material profile" +msgstr "standaard SLA-materiaalprofiel" + +msgid "default SLA print profile" +msgstr "standaard SLA-printprofiel" + +msgid "full profile name" +msgstr "volledige profielnaam" + +msgid "symbolic profile name" +msgstr "symbolische profielnaam" + msgid "Line width" msgstr "Lijn dikte" @@ -7631,13 +8927,13 @@ msgid "Wall generator" msgstr "Wandgenerator" msgid "Walls and surfaces" -msgstr "" +msgstr "Wanden en oppervlakten" msgid "Bridging" -msgstr "" +msgstr "Overbruggen" msgid "Overhangs" -msgstr "" +msgstr "Overhangen" msgid "Walls" msgstr "Wanden" @@ -7662,13 +8958,13 @@ msgstr "" "Dit is de snelheid voor diverse overhanggraden. Overhanggraden worden " "uitgedrukt als een percentage van de laag breedte. 0 betekend dat er niet " "afgeremd wordt voor overhanggraden en dat dezelfde snelheid als voor wanden " -"gebruikt wordt." +"gebruikt wordt" msgid "Bridge" msgstr "Brug" msgid "Set speed for external and internal bridges" -msgstr "" +msgstr "Snelheid instellen voor externe en interne bruggen" msgid "Travel speed" msgstr "Verplaatsing-sneleheid" @@ -7685,15 +8981,27 @@ msgstr "Vlot" msgid "Support filament" msgstr "Support filament" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "" -msgid "Skirt" -msgstr "Skirt" +msgid "Multimaterial" +msgstr "Multimateriaal" msgid "Prime tower" msgstr "Prime toren" +msgid "Filament for Features" +msgstr "" + +msgid "Ooze prevention" +msgstr "Druippreventie" + +msgid "Skirt" +msgstr "Skirt" + msgid "Special mode" msgstr "Speciale modus" @@ -7704,7 +9012,7 @@ msgid "Post-processing Scripts" msgstr "Post-processing Scripts" msgid "Notes" -msgstr "Notes" +msgstr "Opmerkingen" msgid "Frequent" msgstr "Veelgebruikt" @@ -7721,11 +9029,11 @@ msgid_plural "" msgstr[0] "" "De volgende regel %s bevat gereserveerde trefwoorden.\n" "Verwijder deze woorden alstublieft, anders overschrijven deze de G-code-" -"visualisatie en de schatting van de afdruktijd.@" +"visualisatie en de schatting van de afdruktijd." msgstr[1] "" "De volgende regel %s bevat gereserveerde trefwoorden.\n" "Verwijder deze woorden alstublieft, anders overschrijven deze de G-code-" -"visualisatie en de schatting van de afdruktijd.@" +"visualisatie en de schatting van de afdruktijd." msgid "Reserved keywords found" msgstr "Gereserveerde zoekworden gevonden" @@ -7737,15 +9045,18 @@ msgid "Retraction" msgstr "Terugtrekken (retraction)" msgid "Basic information" -msgstr "Basis informatie" +msgstr "Basisinformatie" msgid "Recommended nozzle temperature" -msgstr "Aanbevolen nozzle temperatuur" +msgstr "Aanbevolen mondstuk temperatuur" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" -"De geadviseerde nozzle temperatuur voor dit filament. 0 betekend dat er geen " -"voorgestelde waarde is " +"De geadviseerde mondstuk temperatuur voor dit filament. 0 betekend dat er " +"geen waarde is" + +msgid "Flow ratio and Pressure Advance" +msgstr "" msgid "Print chamber temperature" msgstr "" @@ -7753,59 +9064,64 @@ msgstr "" msgid "Print temperature" msgstr "Print temperatuur" -msgid "Nozzle" -msgstr "Nozzle" - msgid "Nozzle temperature when printing" -msgstr "Nozzle temperatuur tijdens printen" +msgstr "Mondstuk temperatuur tijdens printen" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "Cool (koud) printbed" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Dit is de bedtemperatuur wanneer de koelplaat is geïnstalleerd. Een waarde " "van 0 betekent dat het filament printen op de Cool Plate niet ondersteunt." -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "Engineering plate (technisch printbed)" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Dit is de bedtemperatuur wanneer de technische plaat is geïnstalleerd. Een " "waarde van 0 betekent dat het filament afdrukken op de Engineering Plate " "niet ondersteunt." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Gladde PEI Plaat / Hoge Temp Plaat" +msgstr "Gladde PEI-plaat / Hoge temperatuurplaat" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Bedtemperatuur wanneer gladde PEI-plaat/hoge temperatuurplaat is " "geïnstalleerd. Waarde 0 betekent dat het filament niet geschikt is voor " "afdrukken op de gladde PEI-plaat/hoge temperatuurplaat." msgid "Textured PEI Plate" -msgstr "PEI plaat met structuur" +msgstr "Getextureerde PEI-plaat" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Bedtemperatuur wanneer een getextureerde PEI-plaat is geïnstalleerd. 0 " "betekent dat het filament niet wordt ondersteund op de getextureerde PEI-" @@ -7814,9 +9130,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Volumetrische snelheidsbeperking" -msgid "Cooling" -msgstr "Koeling" - msgid "Cooling for specific layer" msgstr "Koeling voor specifieke laag" @@ -7866,25 +9179,34 @@ msgstr "Filament start G-code" msgid "Filament end G-code" msgstr "Filament einde G-code" -msgid "Multimaterial" -msgstr "" - msgid "Wipe tower parameters" msgstr "Afveegblokparameters" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Toolwisselparameter voor multi-materialprinters met één extruder" -msgid "Ramming settings" -msgstr "Ramming-instellingen" +msgid "Set" +msgstr "Instellen" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "" +msgid "Dependencies" +msgstr "Afhankelijkheden" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Geschikte proces profielen" + msgid "Printable space" msgstr "Ruimte waarbinnen geprint kan worden" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "" @@ -7907,8 +9229,8 @@ msgstr "" msgid "Accessory" msgstr "Accessoire" -msgid "Machine gcode" -msgstr "Machine G-code" +msgid "Machine G-code" +msgstr "" msgid "Machine start G-code" msgstr "Machine start G-code" @@ -7925,9 +9247,12 @@ msgstr "G-Code voor de laag wijziging" msgid "Layer change G-code" msgstr "G-code laag wijzigen" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "Time-lapse G-code" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "Filament G-code aanpassen" @@ -7946,6 +9271,12 @@ msgstr "Bewegingsvermogen" msgid "Normal" msgstr "Normaal" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Snelheids limiet" @@ -7955,19 +9286,41 @@ msgstr "Versnellingsbeperking" msgid "Jerk limitation" msgstr "Jerk beperking" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "" +msgid "Number of extruders of the printer." +msgstr "Aantal extruders van de printer." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Multi-material met één extruder is geselecteerd.\n" +"Alle extruders moeten daarvoor dezelfde diameter hebben.\n" +"Wilt u de diameters voor alle extruders aanpassen gelijk aan die van de " +"eerste extruder?" + +msgid "Nozzle diameter" +msgstr "Mondstuk diameter" + msgid "Wipe tower" msgstr "Afveegblok" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Parameter voor multi-material met één extruder" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" + msgid "Layer height limits" msgstr "Limieten voor laaghoogte" -msgid "Lift Z Enforcement" +msgid "Z-Hop" msgstr "" msgid "Retraction when switching material" @@ -7985,6 +9338,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Firmware intrekken" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Losgemaakt" @@ -7996,7 +9357,7 @@ msgstr "" "%d Filament Preset en %d Process Preset zijn gekoppeld aan deze printer. " "Deze voorinstellingen worden verwijderd als de printer wordt verwijderd." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "" "Presets die door andere presets worden geërfd, kunnen niet worden verwijderd!" @@ -8015,24 +9376,17 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "De volgende voorinstelling zal ook verwijderd worden@" msgstr[1] "De volgende voorinstelling zal ook verwijderd worden@" -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Weet je zeker dat je de geselecteerde preset wilt verwijderen? \n" -"Als de voorinstelling overeenkomt met een filament dat momenteel in gebruik " -"is op je printer, reset dan de filamentinformatie voor die sleuf." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Weet u zeker dat u de geselecteerde preset wilt %1%?" -msgid "All" -msgstr "Alles" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Instellen" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8129,15 +9483,13 @@ msgstr "" "bevat de navolgende nog niet opgeslagen aanpassingen:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "" msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" -"\n" -"You can save or discard the preset values you have modified." msgid "" "\n" @@ -8146,7 +9498,7 @@ msgid "" msgstr "" msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "" msgid "" "\n" @@ -8157,9 +9509,6 @@ msgstr "" msgid "Extruders count" msgstr "Extruder aantal" -msgid "General" -msgstr "Algemeen" - msgid "Capabilities" msgstr "Mogelijkheden" @@ -8167,7 +9516,7 @@ msgid "Show all presets (including incompatible)" msgstr "Toon alle presets (inclusief incompatibele)" msgid "Select presets to compare" -msgstr "Select presets to compare" +msgstr "" msgid "" "You can only transfer to current active profile because it has been modified." @@ -8218,6 +9567,9 @@ msgstr "Auteur" msgid "Model Name" msgstr "Model naam" +msgid "Description:" +msgstr "Omschrijving:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Bijwerken" @@ -8228,24 +9580,21 @@ msgstr "Er is een nieuwe versie beschikbaar" msgid "Configuration update" msgstr "Configuratie update" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "" "Er is een installatiebestand met een nieuwe configuratie. Wilt u deze " "installeren?" -msgid "Description:" -msgstr "Omschrijving:" - msgid "Configuration incompatible" msgstr "De configuratie is niet geschikt" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "Het configuratie bestand is niet compatibel met de huidige toepassing." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Het configuratiepakket is niet compatibel met de huidige toepassing.\n" "%s zal het configuratiepakket bijwerken. Anders kan het niet starten." @@ -8254,73 +9603,227 @@ msgstr "" msgid "Exit %s" msgstr "Exit %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"Het configuratie bestand is niet compatibel met de huidige versie van Bambu " -"Studio." - msgid "Configuration updates" -msgstr "Configuratie updates" +msgstr "" msgid "No updates available." -msgstr "Geen updates beschikbaar." +msgstr "" msgid "The configuration is up to date." -msgstr "De configuratie is up to date." +msgstr "" -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "" -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "" msgid "Append" -msgstr "Append" +msgstr "" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "" -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse wordt niet ondersteund omdat Afdruksequentie is ingesteld op \"Per " +"object\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" msgstr "Ramming aanpassen" @@ -8347,33 +9850,23 @@ msgstr "" "Dit is een expert-level instelling. Onjuiste aanpassingen kunnen zorgen voor " "verstoppingen en andere problemen." -msgid "Total ramming time" -msgstr "Totale ramming-tijd" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Totaal ramming-volume" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Lijnbreedte voor ramming" - -msgid "Ramming line spacing" -msgstr "Lijnafstand voor ramming" - -msgid "Auto-Calc" -msgstr "Automatisch berekenen" - -msgid "Re-calculate" -msgstr "Herbereken" - -msgid "Flushing volumes for filament change" -msgstr "Volumes reinigen voor filament wijziging" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -8388,23 +9881,23 @@ msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "" "De vermenigvuldigingsfactor moet in het bereik liggen van [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Herbereken" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Vermenigvuldiger" -msgid "unloaded" -msgstr "uitgeladen" +msgid "Flushing volumes for filament change" +msgstr "Volumes reinigen voor filament wijziging" -msgid "loaded" -msgstr "Geladen" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Van" - -msgid "To" -msgstr "Naar" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8418,7 +9911,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -8428,7 +9921,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" @@ -8454,13 +9947,7 @@ msgid "Objects list" msgstr "Object lijst" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files" - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" +msgstr "" msgid "Paste from clipboard" msgstr "Plakken vanuit klembord" @@ -8479,69 +9966,42 @@ msgstr "Toon lijst met sneltoetsen" msgid "Global shortcuts" msgstr "Globale snelkoppelingen" -msgid "Rotate View" -msgstr "Rotate View" - msgid "Pan View" -msgstr "Pan View" +msgstr "" -msgid "Mouse wheel" -msgstr "Muiswiel" +msgid "Rotate View" +msgstr "" msgid "Zoom View" -msgstr "Zoom View" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "" msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Oriënteert automatisch geselecteerde objecten of alle objecten. Als er " "geselecteerde objecten zijn, oriënteert het alleen de geselecteerde " -"objecten. Anders oriënteert het alle objecten op de disk." +"objecten. Anders worden alle objecten van het project georiënteerd." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "" msgid "Collapse/Expand the sidebar" msgstr "De menubalk in-/uitschuiven" -msgid "⌘+Any arrow" -msgstr "⌘+willekeurige pijl" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Beweging in cameragebied" -msgid "⌥+Left mouse button" -msgstr "⌥+Linker muisknop" - msgid "Select a part" msgstr "Selecteer een onderdeel" -msgid "⌘+Left mouse button" -msgstr "⌘+Linker muisknop" - msgid "Select multiple objects" msgstr "Selecteer meerdere objecten" -msgid "Ctrl+Any arrow" -msgstr "CTRL+willekeurige pijl" - -msgid "Alt+Left mouse button" -msgstr "Alt+Linker muisknop" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Linker muisknop" - -msgid "Shift+Left mouse button" -msgstr "Shift+Linker muisknop" - msgid "Select objects by rectangle" msgstr "Objecten selecteren door rechthoek" @@ -8569,9 +10029,6 @@ msgstr "Pijl naar rechts" msgid "Move selection 10 mm in positive X direction" msgstr "Verplaats de selectie 10mm in een positieve X richting" -msgid "Shift+Any arrow" -msgstr "Shift+willekeurige pijl" - msgid "Movement step set to 1 mm" msgstr "Bewegingsinterval ingesteld op 1mm" @@ -8605,17 +10062,23 @@ msgstr "Selecteer alle objecten" msgid "Gizmo move" msgstr "Gizmo bewegen" +msgid "Gizmo rotate" +msgstr "Gizmo roteren" + msgid "Gizmo scale" msgstr "Gizmo schalen" -msgid "Gizmo rotate" -msgstr "Gizmo roteren" +msgid "Gizmo place face on bed" +msgstr "Gizmo plaats gebied op het bed" msgid "Gizmo cut" msgstr "Gizmo snijden" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Plaats gebied op het bed" +msgid "Gizmo mesh boolean" +msgstr "Gizmo mesh booleaan" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "Gizmo SLA-ondersteuningspunten" @@ -8623,8 +10086,17 @@ msgstr "Gizmo SLA-ondersteuningspunten" msgid "Gizmo FDM paint-on seam" msgstr "Gizmo FDM seam schilderen" -msgid "Gizmo Text emboss / engrave" -msgstr "" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo tekst reliëf/graveren" + +msgid "Gizmo measure" +msgstr "Gizmo maatregel" + +msgid "Gizmo assemble" +msgstr "Gizmo monteren" + +msgid "Gizmo brim ears" +msgstr "Gizmo rand oren" msgid "Zoom in" msgstr "Zoom in" @@ -8641,32 +10113,20 @@ msgstr "Plaat" msgid "Move: press to snap by 1mm" msgstr "Verplaatsen: druk om 1 mm te verplaatsen" -msgid "⌘+Mouse wheel" -msgstr "⌘+muiswiel" - msgid "Support/Color Painting: adjust pen radius" msgstr "Support/kleur intekenen: pas de pen diameter aan" -msgid "⌥+Mouse wheel" -msgstr "⌥+Muiswiel" - msgid "Support/Color Painting: adjust section position" msgstr "Support/kleur intekenen: pas de sectie positie aan" -msgid "Ctrl+Mouse wheel" -msgstr "CTRL+muiswiel" - -msgid "Alt+Mouse wheel" -msgstr "Alt+muiswiel" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Stel het extrudernnumer in voor de objecten en onderdelen" -msgid "Delete objects, parts, modifiers " -msgstr "Verwijder objecten, onderdelen, aanpassingen " +msgid "Delete objects, parts, modifiers" +msgstr "Verwijder objecten, onderdelen, aanpassingen" msgid "Select the object/part and press space to change the name" msgstr "" @@ -8698,15 +10158,12 @@ msgstr "Horizontale schuifbalk - Beweeg actieve duim naar rechts" msgid "On/Off one layer mode of the vertical slider" msgstr "Aan/uit één laagmodus van de verticale schuifregelaar" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "" msgid "Move slider 5x faster" msgstr "Schuifregelaar 5x sneller verplaatsen" -msgid "Shift+Mouse wheel" -msgstr "Shift+Muiswiel" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8717,7 +10174,7 @@ msgid "Release Note" msgstr "Release-opmerkingen" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "versie %s update informatie:" msgid "Network plug-in update" @@ -8730,7 +10187,7 @@ msgstr "" "volgende keer wordt gestart." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "" "Een nieuwe netwerk plug-in (%s) is beschikbaar. Wilt je deze installeren?" @@ -8740,63 +10197,29 @@ msgstr "Nieuwe versie van Snapmaker Orca" msgid "Skip this Version" msgstr "Deze versie overslaan" -msgid "Done" -msgstr "Done" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Filament laden" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" - msgid "Confirm and Update Nozzle" msgstr "Bevestig en update het mondstuk" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN-verbinding mislukt (verzenden afdrukbestand)" +msgid "Connect the printer using IP and access code" +msgstr "" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Stap 1, bevestig dat Snapmaker Orca en uw printer zich in hetzelfde LAN " -"bevinden." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Stap 2, als het IP-adres en de toegangscode hieronder afwijken van de " -"werkelijke waarden op uw printer, corrigeer ze dan." msgid "IP" msgstr "IP" @@ -8804,19 +10227,42 @@ msgstr "IP" msgid "Access Code" msgstr "Toegangscode" +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "Waar vind je het IP-adres en de toegangscode van je printer?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." +msgid "Connect" msgstr "" -"Stap 3: Ping het IP-adres om te controleren op pakketverlies en latentie." -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "IP en toegangscode geverifieerd! U kunt het venster sluiten" +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" + msgid "Connection failed, please double check IP and Access Code" msgstr "Verbinding mislukt, controleer IP en toegangscode opnieuw" @@ -8827,31 +10273,51 @@ msgstr "" "Verbinding mislukt! Als uw IP-adres en toegangscode correct zijn, \n" "ga dan naar stap 3 voor het oplossen van netwerkproblemen" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Model:" -msgid "Serial:" -msgstr "Serienummer:" - -msgid "Version:" -msgstr "Versie" - msgid "Update firmware" msgstr "Firmware bijwerken" msgid "Beta version" msgstr "Beta versie" -msgid "Latest version" -msgstr "Nieuwste versie" - msgid "Updating" -msgstr "Bijwerken…" +msgstr "Bijwerken" -msgid "Updating failed" +msgid "Update failed" msgstr "Bijwerken mislukt" -msgid "Updating successful" +msgid "Update successful" msgstr "Update geslaagd" msgid "" @@ -8882,8 +10348,8 @@ msgstr "" msgid "Extension Board" msgstr "Extension Board" -msgid "Saving objects into the 3mf failed." -msgstr "Het opslaan van de objecten naar het 3mf bestand is mislukt." +msgid "Saving objects into the 3MF failed." +msgstr "Het opslaan van de objecten naar het 3MF bestand is mislukt." msgid "Only Windows 10 is supported." msgstr "Alleen Windos 10 wordt ondersteund." @@ -8906,23 +10372,23 @@ msgstr "Repareren mislukt." msgid "Loading repaired objects" msgstr "Gerepareerde objecten worden geladen" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "Het exporteren van het 3MF bestand is mislukt" -msgid "Import 3mf file failed" -msgstr "Het importen van het 3mf bestand is mislukt" +msgid "Import 3MF file failed" +msgstr "Het importen van het 3MF bestand is mislukt" -msgid "Repaired 3mf file does not contain any object" -msgstr "Het gereparereerde 3mf bestand bevat geen object" +msgid "Repaired 3MF file does not contain any object" +msgstr "Het gereparereerde 3MF bestand bevat geen object" -msgid "Repaired 3mf file contains more than one object" -msgstr "Het gereparereerde 3mf bestand bevat meer dan 1 object" +msgid "Repaired 3MF file contains more than one object" +msgstr "Het gereparereerde 3MF bestand bevat meer dan 1 object" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Het gereparereerde 3mf bestand bevat geen volume." +msgid "Repaired 3MF file does not contain any volume" +msgstr "Het gereparereerde 3MF bestand bevat geen volume." -msgid "Repaired 3mf file contains more than one volume" -msgstr "Het gereparereerde 3mf bestand bevat meer dan 1 volume" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Het gereparereerde 3MF bestand bevat meer dan 1 volume" msgid "Repair finished" msgstr "Reperaren afgerond" @@ -8976,10 +10442,17 @@ msgstr "" "Er kunnen geen objecten geprint worden. Het kan zijn dat ze te klein zijn." msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Uw print is dichtbij de afveeggebieden. Let op dat dit geen botsingen " +"veroorzaakt." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"Kan gcode niet genereren voor ongeldige handmatige G-code.\n" +"Kan G-code niet genereren voor ongeldige handmatige G-code.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." @@ -8989,6 +10462,15 @@ msgstr "Controleer de aangepaste G-code of gebruik de standaard G-code." msgid "Generating G-code: layer %1%" msgstr "Genereren G-code: laag %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Binnenste wand" @@ -9026,7 +10508,7 @@ msgid "Multiple" msgstr "Meerdere" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Kan de lijndikte van %1% niet berekenen omdat de waarde van \"%2%\" niet " "opgehaald kan worden" @@ -9144,16 +10626,16 @@ msgstr "%1% staat te dicht bij anderen en er kunnen botsingen ontstaan." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% is te hoog en er kunnen botsingen ontstaan." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -"staat te dicht bij anderen; er kunnen botsingen optreden tijdens het " -"afdrukken." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" "is te dicht bij het uitsluitingsgebied, er botsingen optreden tijdens het " "printen." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Prime toren" @@ -9168,13 +10650,34 @@ msgstr "" "worden veroorzaakt.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Het is niet mogelijk om met meerdere filamenten te printen die een groot " -"temperatuurverschil hebben. Anders kunnen de extruder en de nozzle tijdens " -"het afdrukken worden geblokkeerd of beschadigd" msgid "No extrusions under current settings." msgstr "Geen extrusion onder de huidige instellingen" @@ -9186,6 +10689,15 @@ msgstr "" "Vloeiende modus van timelapse wordt niet ondersteund wanneer \"per object\" " "sequentie is ingeschakeld." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9199,6 +10711,12 @@ msgid "" msgstr "" "Spiraal (vaas) modus werkt niet als een object meer dan 1 filament bevalt." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "" @@ -9218,11 +10736,10 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Variabele laaghoogte wordt niet ondersteund met organische steunen." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Verschillende mondstukdiameters en verschillende filamentdiameters zijn niet " -"toegestaan als de prime-toren is ingeschakeld." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9232,10 +10749,9 @@ msgstr "" "extruderadressering (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Ooze-preventie wordt momenteel niet ondersteund als de prime tower is " -"ingeschakeld." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9255,21 +10771,27 @@ msgstr "" "laaghoogte. Voor het werken met een prime toren is het van belang dat alle " "lagen dezelfde laaghoogte hebben." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "Een prime toren vereist dat elke \"support opening\" een veelvoud van de " "laaghoogte is." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "Een prime toren vereist dat alle objecten dezelfde laaghoogte hebben." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Een prime-toren vereist dat alle objecten op hetzelfde aantal raftlagen " "worden afgedrukt." +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9279,17 +10801,28 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "De prime toren wordt alleen ondersteund als alle objecten dezelfde variabele " "laaghoogte hebben" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "Te kleine lijnbreedte" msgid "Too large line width" msgstr "Te groote lijnbreedte" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9316,8 +10849,8 @@ msgstr "" "Er zijn support handhavers ingesteld, maar support staat uit. Schakel " "support in." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "De laaghoogte kan niet groter zijn dan de diameter van de nozzle" +msgid "Layer height cannot exceed nozzle diameter." +msgstr "De laaghoogte kan niet groter zijn dan de diameter van het mondstuk" msgid "" "Relative extruder addressing requires resetting the extruder position at " @@ -9359,6 +10892,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9377,6 +10919,16 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" + msgid "Generating skirt & brim" msgstr "Skirt en brim worden gegenereerd" @@ -9389,9 +10941,15 @@ msgstr "Genereer G-code" msgid "Failed processing of the filename_format template." msgstr "Verwerking van het sjabloon \"bestandsnaam_formaat\" is mislukt." +msgid "Printer technology" +msgstr "Printtechnologie" + msgid "Printable area" msgstr "Gebeid waarbinnen geprint kan worden" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Uitgesloten printbed gebied" @@ -9415,14 +10973,14 @@ msgid "Elephant foot compensation" msgstr "\"Elephant foot\" compensatie" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Hierdoor krimpt de eerste laag op de bouwplaat om het \"elephant foot\" " "effect te compenseren." msgid "Elephant foot compensation layers" -msgstr "" +msgstr "\"Elephant foot\" compensatielagen" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9430,13 +10988,17 @@ msgid "" "the next layers will be linearly shrunk less, up to the layer indicated by " "this value." msgstr "" +"Het aantal lagen waarop de \"elephant foot\" compensatie actief zal zijn. De " +"eerste laag zal worden verkleind met de \"elephant foot\" compensatiewaarde, " +"daarna zullen de volgende lagen lineair minder worden verkleind, tot aan de " +"laag die wordt aangegeven door deze waarde." msgid "layers" msgstr "Lagen" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Dit is de hoogte voor iedere laag. Kleinere laaghoogtes geven een grotere " "nauwkeurigheid maar een langere printtijd." @@ -9444,25 +11006,33 @@ msgstr "" msgid "Printable height" msgstr "Hoogte waarbinnen geprint kan worden" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "" "Dit is de maximale printbare hoogte gelimiteerd door de constructie van de " "printer" -msgid "Preferred orientation" +msgid "Extruder printable height" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + +msgid "Preferred orientation" +msgstr "Voorkeursoriëntatie" + +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" msgstr "Namen van printer voorinstellingen" msgid "Use 3rd-party print host" -msgstr "" +msgstr "Gebruik een printhost van derden" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" -msgstr "" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." +msgstr "Toestaan om een BambuLab printer te besturen via printhosts van derden" msgid "Hostname, IP or URL" msgstr "Hostnaam, IP of URL" @@ -9485,7 +11055,7 @@ msgid "Device UI" msgstr "UI van het apparaat" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Geef de URL op van de gebruikersinterface van uw apparaat als deze niet " "hetzelfde is als print_host" @@ -9500,7 +11070,7 @@ msgstr "" "Snapmaker Orca kan G-codebestanden uploaden naar een printerhost. Dit veld moet " "de API-sleutel of het wachtwoord bevatten dat nodig is voor authenticatie." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Naam van de printer" msgid "HTTPS CA File" @@ -9533,7 +11103,7 @@ msgstr "" "offline distributiepunten. Men kan deze optie inschakelen voor " "zelfondertekende certificaten als de verbinding mislukt." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Namen van voorinstellingen gerelateerd aan de fysieke printer" msgid "Authorization Type" @@ -9545,22 +11115,23 @@ msgstr "API sleutel" msgid "HTTP digest" msgstr "HTTP samenvatting" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Vermijd het oversteken van walls" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Omweg om te voorkomen dat de printkop over wanden verplaatst, dit zou " "namelijk klodders op het oppervlak kunnen veroorzaken" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Walls vermijden - Maximale omleidingslengte" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Maximale omleidingsafstand om te voorkomen dat een muur wordt overgestoken: " "De printer zal geen omweg maken als de omleidingsafstand groter is dan deze " @@ -9575,38 +11146,40 @@ msgid "Other layers" msgstr "Andere lagen" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Dit is de bedtemperatuur voor alle lagen behalve de eerste. Een waarde van 0 " "betekent dat het filament het afdrukken op de Cool Plate niet ondersteunt." -msgid "°C" -msgstr "°C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Dit is de bedtemperatuur voor lagen, behalve voor de eerste. Een waarde van " "0 betekent dat het filament afdrukken op de Engineering Plate niet " "ondersteunt." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Dit is de bedtemperatuur voor lagen, behalve voor de eerste. Een waarde van " "0 betekent dat het filament printen op de High Temp Plate niet ondersteunt." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Bedtemperatuur na de eerste laag. 0 betekent dat het filament niet wordt " "ondersteund op de getextureerde PEI-plaat." @@ -9618,66 +11191,72 @@ msgid "Initial layer bed temperature" msgstr "Printbed temperatuur voor de eerste laag" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het " "filament printen op de Cool Plate niet ondersteunt." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het " "filament afdrukken op de Engineering Plate niet ondersteunt." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het " "filament printen op de High Temp Plate niet ondersteunt." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "De bedtemperatuur van de eerste laag 0 betekent dat het filament niet wordt " "ondersteund op de getextureerde PEI-plaat." -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Printbedden ondersteund door de printer" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "Engineering plate (technisch printbed)" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" msgstr "Afdrukvolgorde van de eerste laag" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" "De G-code wordt bij iedere laagwisseling toegevoegd voor het optillen van Z" @@ -9687,7 +11266,7 @@ msgstr "Aantal bodemlagen" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Dit is het aantal vaste lagen van de onderkant inclusief de onderste " "oppervlaktelaag. Wanneer de door deze waarde berekende dikte dunner is dan " @@ -9700,8 +11279,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Het aantal onderste solide lagen wordt verhoogd tijdens het slicen als de " "totale dikte van de onderste lagen lager is dan deze waarde. Dit zorgt " @@ -9713,91 +11292,142 @@ msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" msgstr "Overal" msgid "Top and bottom surfaces" -msgstr "" +msgstr "Boven- en onderoppervlakken" msgid "Nowhere" -msgstr "" +msgstr "Nergens" -msgid "Force cooling for overhang and bridge" -msgstr "Forceer koeling voor overhangende delen en bruggen (bridge)" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Schakel deze optie in om de snelheid van de koelventilator van de printkop " -"te optimaliseren voor overhang en bruggen" -msgid "Fan speed for overhang" -msgstr "Ventilator snelheid voor overhangende delen" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Forceer de koelventilator van de printkop om deze snelheid te hebben bij het " -"afdrukken van een brug of overhangende muur met een grote overhanggraad. Het " -"forceren van koeling voor overhang en brug kan een resulteren in een betere " -"kwaliteit voor dit onderdeel" -msgid "Cooling overhang threshold" -msgstr "Drempel voor overhang koeling" +msgid "Overhang cooling activation threshold" +msgstr "" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" -msgstr "" -"Dwingt de koelventilator tot een bepaalde snelheid wanneer de overhanggraad " -"van het geprinte deel deze waarde overschrijdt. Dit wordt uitgedrukt als een " -"percentage dat aangeeft hoe breed de lijn is zonder steun van de onderste " -"laag. 0%% betekent koeling afdwingen voor de hele buitenwand, ongeacht de " -"overhanggraad." - -msgid "Bridge infill direction" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" +msgid "External bridge infill direction" +msgstr "" + +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Overbrugingshoek overschrijven. 0 betekent dat de overbruggingshoek " "automatisch wordt berekend. Anders wordt de opgegeven hoek gebruikt voor " "externe bruggen. Gebruik 180° voor een hoek van nul." -msgid "Bridge density" +msgid "Internal bridge infill direction" msgstr "" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" msgid "Bridge flow ratio" msgstr "Brugflow" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Verlaag deze waarde iets (bijvoorbeeld 0,9) om de hoeveelheid materiaal voor " -"bruggen te verminderen, dit om doorzakken te voorkomen." msgid "Internal bridge flow ratio" msgstr "" @@ -9805,7 +11435,11 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9813,15 +11447,117 @@ msgstr "Flowratio bovenoppervlak" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Deze factor beïnvloedt de hoeveelheid materiaal voor de bovenste vaste " -"vulling. Je kunt het iets verminderen om een glad oppervlak te krijgen." msgid "Bottom surface flow ratio" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" @@ -9829,17 +11565,16 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "Slechts één wand op de bovenste oppervlakken" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Gebruik slechts één wand op het vlakke bovenvlak, om meer ruimte te geven " "aan het bovenste invulpatroon" @@ -9860,11 +11595,11 @@ msgid "" msgstr "" msgid "Only one wall on first layer" -msgstr "Only one wall on first layer" +msgstr "" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" msgid "Extra perimeters on overhangs" @@ -9872,10 +11607,10 @@ msgstr "" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "" msgid "Overhang reversal" @@ -9883,7 +11618,7 @@ msgstr "" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9894,7 +11629,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9903,9 +11638,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9914,9 +11649,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9935,19 +11670,15 @@ msgstr "" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" msgid "Slow down for overhang" msgstr "Afremmen voor overhangende delen" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Schakel deze optie in om de snelheid omlaag te brengen voor verschillende " "overhangende hoeken" @@ -9955,35 +11686,51 @@ msgstr "" msgid "Slow down for curled perimeters" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" msgid "mm/s or %" msgstr "mm/s of %" -msgid "External" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" -msgid "Speed of bridge and completely overhang wall" -msgstr "Dit is de snelheid voor bruggen en 100% overhangende wanden." - -msgid "mm/s" -msgstr "mm/s" - msgid "Internal" msgstr "" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" msgid "Brim width" msgstr "Rand breedte" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Dit is de afstand van het model tot de buitenste randlijn." msgid "Brim type" @@ -9991,23 +11738,21 @@ msgstr "Rand type" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." -msgstr "" -"This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgstr "" msgid "Brim-object gap" msgstr "Ruimte tussen rand en object" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Dit creëert ruimte tussen de binnenste brimlijn en het object en zorgt " "ervoor dat het object eenvoudiger van het printbed kan worden verwijderd." msgid "Brim ears" -msgstr "" +msgstr "Rand oren" msgid "Only draw brim over the sharp edges of the model." msgstr "" @@ -10016,8 +11761,8 @@ msgid "Brim ear max angle" msgstr "" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" @@ -10025,27 +11770,42 @@ msgid "Brim ear detection radius" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -msgid "Compatible machine" -msgstr "Geschikte machine" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "opwaarts compatibele machine" -msgid "Compatible machine condition" -msgstr "Conditie van geschikte machine" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Geschikte proces profielen" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van " +"een actief printerprofiel. Als deze aanduiding op waar staat, wordt dit " +"profiel beschouwd als geschikt voor het actieve printerprofiel." -msgid "Compatible process profiles condition" -msgstr "Conditie van -geschikte proces profielen" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van " +"een actief printprofiel. Als deze aanduiding op waar staat, wordt dit " +"profiel beschouwd als geschikt voor het actieve printprofiel." + +msgid "Print sequence, layer by layer or object by object." msgstr "" "Hiermee wordt de afdrukvolgorde bepaald, zodat u kunt kiezen tussen laag " "voor laag of object voor object printen." @@ -10059,7 +11819,7 @@ msgstr "Op basis van object" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -10072,7 +11832,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Schakel deze optie in om de afdruksnelheid te verlagen om de laatste laag " "printtijd niet korter te maken dan de laagtijddrempel in \"Maximale " @@ -10084,29 +11844,26 @@ msgstr "Normaal printen" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Dit is de standaard versnelling voor zowel normaal printen en verplaatsen " "behalve voor de eerste laag" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Standaard filament profiel" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" "Standaard filamentprofiel bij het overschakelen naar dit machineprofiel" msgid "Default process profile" msgstr "Standaard proces profiel" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Standaard procesprofiel bij het overschakelen naar dit machineprofiel" msgid "Activate air filtration" -msgstr "Activate air filtration" +msgstr "" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" @@ -10115,39 +11872,36 @@ msgid "Fan speed" msgstr "Ventilator snelheid" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Snelheid van de afzuigventilator tijdens het printen. Deze snelheid " -"overschrijft de snelheid in de aangepaste g-code van het filament." +"overschrijft de snelheid in de aangepaste G-code van het filament." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "" msgid "No cooling for the first" msgstr "Geen koeling voor de eerste" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"Schakel alle ventilatoren uit voor de eerste lagen. Het wordt geadviseerd om " -"de koel ventilator voor de eerste laag uit te schakelen om een betere " -"hechting met het printbed te krijgen" msgid "Don't support bridges" msgstr "Geen support bij bruggen toepassen" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Dit schakelt de ondersteuning (support) voor bruggebieden uit, waardoor de " "ondersteuning (support) erg groot kan worden. Bruggen kunnen meestal direct " "zonder ondersteuning (support) worden afgedrukt als ze niet erg lang zijn." -msgid "Thick bridges" -msgstr "Dikke bruggen" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10168,41 +11922,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "Uit" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -10224,20 +12019,20 @@ msgstr "" msgid "End G-code" msgstr "Einde G-code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Voeg een eind G-code toe bij het afwerken van de hele print." -msgid "Between Object Gcode" -msgstr "Tussen object Gcode" +msgid "Between Object G-code" +msgstr "Tussen object G-code" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" -"Gcode invoegen tussen objecten. Deze parameter wordt alleen actief wanneer u " -"uw modellen object voor object afdrukt." +"G-code invoegen tussen objecten. Deze parameter wordt alleen actief wanneer " +"u uw modellen object voor object afdrukt." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "" "Voeg een eind G-code toe bij het afronden van het printen van dit filament." @@ -10264,25 +12059,25 @@ msgstr "" msgid "Top surface pattern" msgstr "Patroon bovenvlak" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "" "Dit is het lijnenpatroon voor de vulling (infill) van het bovenoppervlak." -msgid "Concentric" -msgstr "Concentrisch" - -msgid "Rectilinear" -msgstr "Rechtlijning" - msgid "Monotonic" msgstr "Monotoon" msgid "Monotonic line" msgstr "Monotone lijn" +msgid "Rectilinear" +msgstr "Rechtlijning" + msgid "Aligned Rectilinear" msgstr "Uitgelijnd Rechtlijnig" +msgid "Concentric" +msgstr "Concentrisch" + msgid "Hilbert Curve" msgstr "Hilbert Curve" @@ -10295,7 +12090,7 @@ msgstr "Octagram Spiraal" msgid "Bottom surface pattern" msgstr "Bodem oppvlakte patroon" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" "Dit is het lijnenpatroon van de vulling (infill) van het bodemoppervlak, " "maar niet van de vulling van de brug." @@ -10334,7 +12129,7 @@ msgid "Small perimeters threshold" msgstr "" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Dit stelt de drempel voor kleine omtreklengte in. De standaarddrempel is 0 mm" @@ -10342,10 +12137,10 @@ msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10355,15 +12150,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -10383,7 +12176,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10397,10 +12190,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -10416,8 +12209,8 @@ msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"Afstand van de punt van de nozzle tot de onderste stang. Wordt gebruikt om " -"botsingen te voorkomen bij het afdrukken op basis van objecten." +"Afstand van de punt van het mondstuk tot de onderste stang. Wordt gebruikt " +"om botsingen te voorkomen bij het afdrukken op basis van objecten." msgid "Height to lid" msgstr "Hoogte tot deksel" @@ -10426,7 +12219,7 @@ msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." msgstr "" -"Afstand van de punt van de nozzle tot het deksel. Wordt gebruikt om " +"Afstand van de punt van het mondstuk tot het deksel. Wordt gebruikt om " "botsingen te voorkomen bij het afdrukken op basis van objecten." msgid "" @@ -10486,10 +12279,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Extruder kleur" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Wordt alleen gebruikt als een visuele weergave op de UI" msgid "Extruder offset" @@ -10499,11 +12295,11 @@ msgid "Flow ratio" msgstr "Flow verhouding" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Het materiaal kan een volumetrische verandering hebben na het wisselen " "tussen gesmolten en gekristaliseerde toestand. Deze instelling verandert " @@ -10512,15 +12308,106 @@ msgstr "" "mogelijk optimaliseren om een mooi vlak oppervlak te krijgen als er een " "lichte over- of onderflow is." +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" + msgid "Enable pressure advance" msgstr "Pressure advance inschakelen" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" msgid "" @@ -10532,8 +12419,9 @@ msgid "Keep fan always on" msgstr "Laat de ventilator aan staan" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Als deze instelling is ingeschakeld, zal de printkop ventilator altijd aan " "staan op een minimale snelheid om het aantal start en stop momenten te " @@ -10546,13 +12434,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -10561,7 +12447,7 @@ msgstr "Laag tijd" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "De printkop ventilator wordt ingeschakeld voor lagen waarvan de geschatte " "printtijd korter is dan deze waarde. Ventilatorsnelheid wordt geïnterpoleerd " @@ -10571,66 +12457,122 @@ msgstr "" msgid "Default color" msgstr "Standaardkleur" -msgid "Default filament color" -msgstr "Standaard filamentkleur" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" -msgstr "Filament notes" +msgstr "" msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." +msgstr "" msgid "Required nozzle HRC" -msgstr "Vereiste nozzle HRC" +msgstr "Vereiste mondstuk HRC" msgid "" "Minimum HRC of nozzle required to print the filament. Zero means no checking " "of nozzle's HRC." msgstr "" -"Minimale HRC van de nozzle die nodig is om het filament te printen. Een " -"waarde van 0 betekent geen controle van de HRC van de spuitdop." +"Minimale HRC van het mondstuk die nodig is om het filament te printen. Een " +"waarde van 0 betekent geen controle van de HRC van het mondstuk." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Deze instelling is het volume filament dat per seconde kan worden gesmolten " "en geëxtrudeerd. De afdruksnelheid wordt beperkt door de maximale " "volumetrische snelheid, in geval van een te hoge en onredelijke " "snelheidsinstelling. Deze waarde kan niet nul zijn." -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Filament laadt tijd" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tijd welke nodig is om nieuw filament te laden tijdens het wisselen. Enkel " -"voor statistieken." msgid "Filament unload time" msgstr "Tijd die nodig is om filament te ontladen" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" -"Tijd welke nodig is om oud filament te lossen tijdens het wisselen. Enkel " -"voor statistieken." msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Filamentdiameter wordt gebruikt om de extrusie in de G-code te berekenen, " -"het is dus belangrijk dat deze nauwkeurig wordt ingegeven" +"het is dus belangrijk dat deze nauwkeurig wordt ingegeven." msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10639,18 +12581,46 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Laadsnelheid" @@ -10667,7 +12637,7 @@ msgid "Unloading speed" msgstr "Ontlaadsnelheid" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Snelheid die gebruikt wordt voor het ontladen van het afveegblok (heeft geen " @@ -10686,8 +12656,8 @@ msgid "Delay after unloading" msgstr "Vertraging na het ontladen" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Wachttijd voor het ontladen van het filament. Dit kan helpen om betrouwbare " @@ -10704,6 +12674,21 @@ msgstr "" "Het filament wordt gekoeld tijdens het terug en voorwaarts bewegen in de " "koelbuis. Specificeer het benodigd aantal bewegingen." +msgid "Stamping loading speed" +msgstr "" + +msgid "Speed used for stamping." +msgstr "" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" + msgid "Speed of the first cooling move" msgstr "Snelheid voor de eerste koelbeweging" @@ -10728,15 +12713,6 @@ msgstr "Snelheid voor de laatste koelbeweging" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Koelbewegingen versnellen gelijkmatig tot aan deze snelheid." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tijd voor de printerfirmware (of de MMU 2.0) om nieuw filament te laden " -"tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd " -"wordt toegevoegd aan de totale printtijd in de tijdsschatting." - msgid "Ramming parameters" msgstr "Rammingparameters" @@ -10747,83 +12723,82 @@ msgstr "" "Deze frase is bewerkt door het Rammingdialoog en bevat parameters voor de " "ramming." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tijd voor de printerfirmware (of de MMU 2.0) om filament te ontladen tijdens " -"een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd wordt " -"toegevoegd aan de totale printtijd in de tijdsschatting." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" msgid "Density" msgstr "Dichtheid" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Filamentdichtheid, alleen voor statistische doeleinden." -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Filament materiaal." msgid "Soluble material" msgstr "Oplosbaar materiaal" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Oplosbaar materiaal wordt doorgaans gebruikt om odnersteuning (support) en " "support interface te printen " +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Support materiaal" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Support materiaal wordt vaak gebruikt om support en support interfaces af te " "drukken." +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Verzachtingstemperatuur" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" -"The material softens at this temperature, so when the bed temperature is " "equal to or greater than this, it's highly recommended to open the front " -"door and/or remove the upper glass to avoid clogs." +"door and/or remove the upper glass to avoid clogging." +msgstr "" msgid "Price" msgstr "Prijs" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Filament prijs. Alleen voor statistieken" msgid "money/kg" @@ -10832,7 +12807,7 @@ msgstr "Prijs per KG" msgid "Vendor" msgstr "Leverancier" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Verkoper van filament. Alleen voor show" msgid "(Undefined)" @@ -10843,7 +12818,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Dit is de hoek voor een dun opvulpatroon, dat het begin of de hoofdrichting " "van de lijnen bepaalt." @@ -10853,13 +12828,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10868,38 +12837,67 @@ msgstr "Vulling percentage" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "Vulpatroon" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Dit is het lijnpatroon voor dunne interne vulling (infill)" -msgid "Grid" -msgstr "Rooster" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Lijn" -msgid "Cubic" -msgstr "Kubusvormig" +msgid "Grid" +msgstr "Rooster" msgid "Tri-hexagon" msgstr "Driehoek" -msgid "Gyroid" -msgstr "Gyroide" - -msgid "Honeycomb" -msgstr "Honinggraad" +msgid "Cubic" +msgstr "Kubusvormig" msgid "Adaptive Cubic" msgstr "Adaptief kubiek" -msgid "3D Honeycomb" -msgstr "3D Honingraat" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "Ondersteuning Cubic" @@ -10907,9 +12905,53 @@ msgstr "Ondersteuning Cubic" msgid "Lightning" msgstr "Lightning" +msgid "Honeycomb" +msgstr "Honinggraad" + +msgid "3D Honeycomb" +msgstr "3D Honingraat" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "Cross Hatch" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroide" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "" @@ -10921,16 +12963,16 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" msgid "0 (no open anchors)" -msgstr "0 (no open anchors)" +msgstr "" msgid "1000 (unlimited)" -msgstr "1000 (unlimited)" +msgstr "" msgid "Maximum length of the infill anchor" msgstr "Maximale lengte van de vullingsbevestiging" @@ -10943,7 +12985,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10951,23 +12993,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Versnelling van de topoppervlakte-invulling. Gebruik van een lagere waarde " "kan de kwaliteit van de bovenlaag verbeteren." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Versnelling van de buitenwand: een lagere waarde kan de kwaliteit verbeteren." @@ -10977,7 +13019,7 @@ msgid "" msgstr "" msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² of %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." @@ -10995,7 +13037,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Dit is de afdrukversnelling voor de eerste laag. Een beperkte versnelling " "kan de hechting van de bouwplaat verbeteren." @@ -11003,7 +13045,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Accel_to_decel inschakelen" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "De max_accel_to_decel van Klipper wordt automatisch aangepast" msgid "accel_to_decel" @@ -11011,25 +13053,36 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk van de buitenwand" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk van de binnenwand" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "" msgid "" @@ -11042,26 +13095,26 @@ msgstr "Laaghoogte van de eerste laag" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Dit is de hoogte van de eerste laag. Door de hoogte van de eerste laag hoger " "te maken, kan de hechting op het printbed worden verbeterd." -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "" "Dit is de snelheid voor de eerste laag behalve solide vulling (infill) delen" msgid "Initial layer infill" msgstr "Vulling (infill) van de eerste laag" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "" "Dit is de snelheid voor de solide vulling (infill) delen van de eerste laag." msgid "Initial layer travel speed" msgstr "" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "" msgid "Number of slow layers" @@ -11073,11 +13126,11 @@ msgid "" msgstr "" msgid "Initial layer nozzle temperature" -msgstr "Nozzle temperatuur voor de eerste laag" +msgstr "Mondstuk temperatuur voor de eerste laag" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" -"Nozzle temperatuur om de eerste laag mee te printen bij gebruik van dit " +"Mondstuk temperatuur om de eerste laag mee te printen bij gebruik van dit " "filament" msgid "Full fan speed at layer" @@ -11098,25 +13151,49 @@ msgid "Support interface fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Deze instelling zorgt ervoor dat de toolhead willekeurig schudt tijdens het " "printen van muren, zodat het oppervlak er ruw uitziet. Deze instelling " "regelt de \"fuzzy\" positie." msgid "Contour" -msgstr "Contour" +msgstr "" msgid "Contour and hole" -msgstr "Contour and hole" +msgstr "" msgid "All walls" msgstr "Alle wanden" @@ -11125,8 +13202,8 @@ msgid "Fuzzy skin thickness" msgstr "Fuzzy skin dikte" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "De breedte van jittering: het is aan te raden deze lager te houden dan de " "lijndikte van de buitenste wand." @@ -11135,8 +13212,8 @@ msgid "Fuzzy skin point distance" msgstr "Fuzzy skin punt afstand" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "De gemiddelde afstand tussen de willekeurige punten die op ieder lijnsegment " "zijn geïntroduceerd" @@ -11144,7 +13221,96 @@ msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "Klassiek" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" @@ -11153,36 +13319,36 @@ msgstr "Kleine openingen wegfilteren" msgid "Layers and Perimeters" msgstr "Lagen en perimeters" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Dit is de snelheid voor het opvullen van gaten. Tussenruimtes hebben meestal " "een onregelmatige lijndikte en moeten daarom langzamer worden afgedrukt." msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." msgid "Arc fitting" msgstr "Boog montage" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11192,7 +13358,8 @@ msgstr "" msgid "Add line number" msgstr "Lijn hoogte toevoegen" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Schakel dit in om regelnummer (Nx) toe te voegen aan het begin van elke G-" "coderegel." @@ -11202,20 +13369,20 @@ msgstr "Eerste laag scannen" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Schakel dit in zodat de camera in de printer de kwaliteit van de eerste laag " "kan controleren." msgid "Nozzle type" -msgstr "Nozzle type" +msgstr "Mondstuk type" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" -"Het type metaal van de nozzle. Dit bepaalt de slijtvastheid van de nozzle en " -"wat voor soort filament kan worden geprint" +"Het type metaal van het mondstuk. Dit bepaalt de slijtvastheid van het " +"mondstuk en wat voor soort filament kan worden geprint" msgid "Undefine" msgstr "Undefined" @@ -11226,18 +13393,21 @@ msgstr "Gehard staal" msgid "Stainless steel" msgstr "Roestvrij staal" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Messing" msgid "Nozzle HRC" -msgstr "Nozzle HRC" +msgstr "Mondstuk HRC" msgid "" "The nozzle's hardness. Zero means no checking for nozzle's hardness during " "slicing." msgstr "" -"De hardheid van de nozzle. Nul betekent geen controle op de hardheid van het " -"mondstuk tijdens het slicen." +"De hardheid van het mondstuk. Nul betekent geen controle op de hardheid van " +"het mondstuk tijdens het slicen." msgid "HRC" msgstr "HRC" @@ -11245,7 +13415,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Printerstructuur" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "De fysieke opstelling en onderdelen van een afdrukapparaat" msgid "CoreXY" @@ -11278,10 +13448,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" @@ -11305,7 +13475,7 @@ msgstr "" msgid "Time cost" msgstr "" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "" msgid "money/h" @@ -11330,8 +13500,8 @@ msgstr "" msgid "G-code flavor" msgstr "G-code type" -msgid "What kind of gcode the printer is compatible with" -msgstr "Het type G-code waarmee de printer compatibel is" +msgid "What kind of G-code the printer is compatible with." +msgstr "Het type G-code waarmee de printer compatibel is." msgid "Klipper" msgstr "" @@ -11339,29 +13509,33 @@ msgstr "" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "Label objecten" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" +"Schakel dit in om opmerkingen in de G-code toe te voegen voor bewegingen die " +"behoren tot een object. Dit is handig voor de OctoPrint CancelObject-plugin. " +"Deze instelling is NIET geschikt voor een multi-materialsetup met één " +"extruder en 'Afvegen in object' en 'Afvegen in vulling'." msgid "Exclude objects" msgstr "Objecten uitsluiten" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" msgid "Verbose G-code" @@ -11386,6 +13560,128 @@ msgstr "" "Combineer het printen van meerdere lagen vulling om te printtijd te " "verlagen. De wanden worden geprint in de originele laaghoogte." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "" "Dit is het filament voor het printen van interne dunne vulling (infill)" @@ -11413,39 +13709,44 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Dit is de snelheid voor de dunne vulling (infill)" +msgid "Inherits profile" +msgstr "Afgeleid profiel" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" -msgstr "Interface shells" +msgstr "" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" msgid "Maximum width of a segmented region" msgstr "Maximale breedte van een gesegmenteerd gebied" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Maximum width of a segmented region. A value of 0 disables this feature." msgid "Interlocking depth of a segmented region" msgstr "Insluitdiepte van een gesegmenteerde regio" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Insluitdiepte van een gesegmenteerd gebied. Nul schakelt deze functie uit." msgid "Use beam interlocking" msgstr "" @@ -11516,9 +13817,9 @@ msgid "All solid layer" msgstr "Alle vaste lagen" msgid "Ironing Pattern" -msgstr "Ironing Pattern" +msgstr "" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "" msgid "Ironing flow" @@ -11526,7 +13827,7 @@ msgstr "Flow tijdens strijken" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Dit is de hoeveelheid materiaal die dient te worden geëxtrudeerd tijdens het " "strijken. Het is relatief ten opzichte van de flow van normale laaghoogte. " @@ -11535,34 +13836,49 @@ msgstr "" msgid "Ironing line spacing" msgstr "Afstand tussen de strijklijnen" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "" "Dit is de afstand voor de lijnen die gebruikt worden voor het strijken." +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "Snelheid tijdens het strijken" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Dit is de print snelheid van de strijk lijnen" -msgid "Ironing angle" +msgid "Ironing angle offset" msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "The angle of ironing lines offset from the top surface." msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "De G-code wordt bij iedere laagwisseling toegevoegd na het optillen van Z" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Stille modus" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Dit geeft aan of de machine de stille modus ondersteunt waarin de machine " "een lagere versnelling gebruikt om te printen" @@ -11575,23 +13891,23 @@ msgstr "Machine limieten" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Deze G-code wordt gebruikt als code voor de pauze. Gebruikers kunnen een " "pauze-G-code invoegen in de G-code-viewer." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Deze G-code wordt gebruikt als een aangepaste code" msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -11600,8 +13916,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -11676,6 +13992,15 @@ msgstr "Maximale jerk voor de Z as" msgid "Maximum jerk of the E axis" msgstr "Maximale jerk voor de E as" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Minimale snelheid voor extruden" @@ -11703,26 +14028,42 @@ msgstr "Maximale versnelling voor terugtrekken (retraction) (M204 R)" msgid "Maximum acceleration for travel" msgstr "Maximale versnelling voor verplaatsen" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" + +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Minimaal" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Maximum" + +msgid "Maximum speed of resonance avoidance." msgstr "" msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "De snelheid van de ventilator op de printkop kan verhoogd worden als " "automatisch koelen is ingeschakeld. Dit is de maximale snelheidslimiet van " "de printkop ventilator" -msgid "Max" -msgstr "Maximum" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"De hoogste printbare laaghoogte voor de extruder: dit wordt gebruikt om de " -"maximale laaghoogte te beperken wanneer adaptieve laaghoogte is ingeschakeld." msgid "Extrusion rate smoothing" msgstr "" @@ -11733,47 +14074,54 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "Minimale snelheid voor de printkop ventilator" msgid "" @@ -11784,30 +14132,22 @@ msgid "" "command: M106 P2 S(0-255)" msgstr "" -msgid "Min" -msgstr "Minimaal" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"De laagste printbare laaghoogte voor de extruder: dit wordt gebruikt om de " -"minimale laaghoogte te beperken wanneer adaptieve laaghoogte is ingeschakeld." msgid "Min print speed" msgstr "Minimale print snelheid" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Nozzle diameter" -msgstr "Nozzle diameter" - -msgid "Diameter of nozzle" -msgstr "Diameter van de nozzle" +msgid "The diameter of nozzle." +msgstr "Diameter van het mondstuk" msgid "Configuration notes" msgstr "Configuratie-opmerkingen" @@ -11830,17 +14170,18 @@ msgstr "" "het type host bevatten." msgid "Nozzle volume" -msgstr "Nozzle volume" +msgstr "Mondstuk volume" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "" -"Volume van de nozzle tussen de filamentsnijder en het uiteinde van de nozzle" +"Volume van het mondstuk tussen de filamentsnijder en het uiteinde van het " +"mondstuk" msgid "Cooling tube position" msgstr "Koelbuispositie" msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "Afstand vanaf de nozzle tot het middelpunt van de koelbuis." +msgstr "Afstand vanaf het mondstuk tot het middelpunt van de koelbuis." msgid "Cooling tube length" msgstr "Koelbuislengte" @@ -11869,9 +14210,9 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Afstand van de nozzlepunt tot de positie waar het filament wordt geparkeerd " -"wanneer dat niet geladen is. Deze moet overeenkomen met de waarde in de " -"firmware." +"Afstand van de punt van het mondstuk tot de positie waar het filament wordt " +"geparkeerd wanneer dat niet geladen is. Deze moet overeenkomen met de waarde " +"in de firmware." msgid "Extra loading distance" msgstr "Extra laadafstand" @@ -11879,7 +14220,7 @@ msgstr "Extra laadafstand" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Als dit ingesteld is op 0, zal de afstand die het filament tijdens het laden " @@ -11888,7 +14229,7 @@ msgstr "" "worden. Als het negatief is, is de laadafstand dus korter." msgid "Start end points" -msgstr "Start end points" +msgstr "" msgid "The start and end points which is from cutter area to garbage can." msgstr "" @@ -11901,17 +14242,22 @@ msgstr "Reduceer terugtrekken (retraction) bij vulling (infill)" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Trek niet terug als de beweging zich volledig in een opvulgebied bevindt. " "Dat betekent dat het sijpelen niet zichtbaar is. Dit kan de retraction times " "voor complexe modellen verkorten en printtijd besparen, maar het segmenteren " "en het genereren van G-codes langzamer maken." +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" + msgid "Filename format" msgstr "Bestandsnaam formaat" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" "Gebruikers kunnen zelf de project bestandsnaam kiezen tijdens het exporteren" @@ -11935,12 +14281,9 @@ msgstr "" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Overhange wand detecteren" @@ -11953,15 +14296,18 @@ msgstr "" "lijnbreedte te detecteren en gebruikt verschillende snelheden om af te " "drukken. Voor 100%% overhang wordt de brugsnelheid gebruikt." +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Dit is de snelheid voor de binnenste wanden" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Dit is het aantal wanden per laag." msgid "Alternate extra wall" @@ -11969,10 +14315,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11986,16 +14332,25 @@ msgid "" "environment variables." msgstr "" +msgid "Printer type" +msgstr "Printertype" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" -msgstr "Printer notes" +msgstr "" msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." +msgstr "" + +msgid "Printer variant" +msgstr "Printervariant" msgid "Raft contact Z distance" msgstr "Vlot (raft) contact Z afstand:" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Dit is de Z-afstand tussen een object en een raft. Het wordt genegeerd voor " "oplosbare materialen." @@ -12003,19 +14358,19 @@ msgstr "" msgid "Raft expansion" msgstr "Vlot (raft) expansie" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Dit vergroot alle raft lagen in het XY vlak." msgid "Initial layer density" msgstr "Dichtheid van de eerste laag" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Dit is de dichtheid van de eerste raft- of support laag." msgid "Initial layer expansion" msgstr "Vergroten van de eerste laag" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Dit zet de eerste raft- of steun (support) laag uit om de hechting van het " "bed te verbeteren." @@ -12025,15 +14380,15 @@ msgstr "Vlot (raft) lagen" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Het object wordt verhoogd met dit aantal support lagen. Gebruik deze functie " "om kromtrekken te voorkomen bij het afdrukken met ABS." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Het G-codepad wordt gegenereerd na het vereenvoudigen van de contouren van " "modellen om teveel punten en G-codelijnen te vermijden. Kleinere waarden " @@ -12045,7 +14400,7 @@ msgstr "Drempel voor verplaatsingsafstand" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Activeer het terugtrekken (retraction) alleen als de verplaatsingsafstand " "groter is dan deze drempel." @@ -12054,7 +14409,7 @@ msgid "Retract amount before wipe" msgstr "Terugtrek (retract) hoeveelheid voor schoonvegen" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "Dit is de lengte van snel intrekken (retraction) vóór een wipe, in " "verhouding tot de retraction lengte." @@ -12062,7 +14417,7 @@ msgstr "" msgid "Retract when change layer" msgstr "Terugtrekken (retract) bij wisselen van laag" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "" "Dit forceert retraction (terugtrekken van filament) als er gewisseld wordt " "van laag" @@ -12072,70 +14427,74 @@ msgstr "Terugtrek (retraction) lengte" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Een deel van het materiaal in de extruder wordt teruggetrokken om sijpelen " -"tijdens verplaatsingen over lange afstand te voorkomen. Stel in op 0 om " -"terugtrekken (retraction) uit te schakelen." -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." +"Experimentele functie: Het filament wordt tijdens het wisselen over een " +"grotere afstand teruggetrokken en afgesneden om de spoeling tot een minimum " +"te beperken. Dit vermindert de spoeling aanzienlijk, maar vergroot mogelijk " +"ook het risico op verstoppingen in het mondstuk of andere printproblemen." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" -msgid "Z hop when retract" -msgstr "Z hop tijdens terugtrekken (retraction)" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Wanneer er een terugtrekking (retracction) is, wordt de nozzle een beetje " -"opgetild om ruimte te creëren tussen de nozzle en de print. Dit voorkomt dat " -"de nozzle de print raakt bij veplaatsen. Het gebruik van spiraallijnen om Z " -"op te tillen kan stringing voorkomen." +"Wanneer er een terugtrekking (retraction) is, wordt het mondstuk een beetje " +"opgetild om ruimte te creëren tussen het mondstuk en de print. Dit voorkomt " +"dat het mondstuk de print raakt bij verplaatsen. Het gebruik van " +"spiraallijnen om Z op te tillen kan stringing voorkomen." -msgid "Z hop lower boundary" -msgstr "Z hop ondergrens" +msgid "Z-hop lower boundary" +msgstr "Z-hop ondergrens" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Z hop treedt alleen in werking wanneer Z boven deze waarde ligt en onder de " -"parameter: \"Z hop bovengrens\"." +"Z-hop treedt alleen in werking wanneer Z boven deze waarde ligt en onder de " +"parameter: \"Z-hop bovengrens\"." -msgid "Z hop upper boundary" -msgstr "Z hop bovengrens" +msgid "Z-hop upper boundary" +msgstr "Z-hop bovengrens" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Als deze waarde positief is, treedt Z hop alleen in werking als Z boven de " -"parameter ligt: \"Z hop ondergrens\" en onder deze waarde ligt" +"Als deze waarde positief is, treedt Z-hop alleen in werking als Z boven de " +"parameter ligt: \"Z-hop ondergrens\" en onder deze waarde ligt" -msgid "Z hop type" +msgid "Z-hop type" +msgstr "" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" @@ -12148,8 +14507,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -12172,7 +14531,7 @@ msgid "On surfaces" msgstr "" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" @@ -12188,6 +14547,18 @@ msgstr "" msgid "Top and Bottom" msgstr "" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Extra lengte bij herstart" @@ -12208,19 +14579,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Terugtrek (retraction) snelheid" -msgid "Speed of retractions" -msgstr "Dit is de snelheid voor terugtrekken (retraction)" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Snelheid van terugtrekken (deretraction)" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"De snelheid voor het herladen van filament in de extruder na een " -"terugtrekking (retraction); als u dit op 0 zet, betekent dit dat het " -"dezelfde snelheid heeft als het intrekken (retraction)." msgid "Use firmware retraction" msgstr "Gebruik firmware retractie" @@ -12229,6 +14597,9 @@ msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" +"Deze experimentele instelling gebruikt G10 en G11 commando's voor het " +"retracten in de firmware. Dit wordt alleen ondersteunt bij de recente Marlin-" +"variant." msgid "Show auto-calibration marks" msgstr "" @@ -12237,13 +14608,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "Naad positie" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Dit is de startpositie voor ieder deel van de buitenste wand." msgid "Nearest" @@ -12252,6 +14623,9 @@ msgstr "Dichtstbijzijnde" msgid "Aligned" msgstr "Uitgelijnd" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Achterzijde" @@ -12281,20 +14655,17 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use scarf joint to minimize seam visibility and increase seam strength." msgid "Conditional scarf joint" -msgstr "Conditional scarf joint" +msgstr "" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Apply scarf joints only to smooth perimeters where traditional seams do not " -"conceal the seams at sharp corners effectively." msgid "Conditional angle threshold" -msgstr "Conditional angle threshold" +msgstr "" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12321,13 +14692,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -12337,52 +14708,48 @@ msgid "This factor affects the amount of material for scarf joints." msgstr "" msgid "Scarf start height" -msgstr "Scarf start height" +msgstr "" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." msgid "Scarf around entire wall" -msgstr "Scarf around entire wall" +msgstr "" msgid "The scarf extends to the entire length of the wall." -msgstr "The scarf extends to the entire length of the wall." +msgstr "" msgid "Scarf length" -msgstr "Scarf length" +msgstr "" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." msgid "Scarf steps" -msgstr "Scarf steps" +msgstr "" msgid "Minimum number of segments of each scarf." -msgstr "Minimum number of segments of each scarf." +msgstr "" msgid "Scarf joint for inner walls" -msgstr "Scarf joint for inner walls" +msgstr "" msgid "Use scarf joint for inner walls as well." -msgstr "Use scarf joint for inner walls as well." +msgstr "" msgid "Role base wipe speed" msgstr "" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" msgid "Wipe on loops" @@ -12397,15 +14764,15 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" @@ -12413,26 +14780,43 @@ msgstr "Veegsnelheid" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "De veegsnelheid wordt bepaald door de snelheidsinstelling die in deze " -"configuratie is opgegeven.Als de waarde wordt uitgedrukt als percentage " +"configuratie is opgegeven. Als de waarde wordt uitgedrukt als percentage " "(bijv. 80%), wordt deze berekend op basis van de bovenstaande instelling van " -"de rijsnelheid.De standaardwaarde voor deze parameter is 80%." +"de rijsnelheid. De standaardwaarde voor deze parameter is 80%." msgid "Skirt distance" msgstr "Rand (skirt) afstand" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Dit is de afstand van de skirt tot de rand van het object." -msgid "Skirt height" -msgstr "Skirt height" +msgid "Skirt start point" +msgstr "" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Number of skirt layers: usually only one" +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" + +msgid "Skirt height" +msgstr "" + +msgid "How many layers of skirt. Usually only one layer." +msgstr "" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "Tochtscherm" @@ -12440,27 +14824,33 @@ msgstr "Tochtscherm" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" -msgstr "Gelimiteerd" - msgid "Enabled" msgstr "Aan" +msgid "Skirt type" +msgstr "" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" + +msgid "Per object" +msgstr "" + msgid "Skirt loops" msgstr "Rand (skirt) lussen" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "" "Dit is het aantal lussen voor de skirt. 0 betekent dat de skirt is " "uitgeschakeld." @@ -12478,13 +14868,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "De printnelheid in geëxporteerde G-code wordt vertraagd wanneer de geschatte " "laagtijd korter is dan deze waarde om een betere koeling voor deze lagen te " @@ -12495,49 +14888,76 @@ msgstr "Minimale drempel voor dunne opvulling (infill)" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Dunne opvullingen (infill) die kleiner zijn dan deze drempelwaarde worden " "vervangen door solide interne vulling (infill)." +msgid "Solid infill" +msgstr "Dichte vulling" + +msgid "Filament to print solid infill." +msgstr "" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Dit is de snelheid voor de interne solide vulling (infill), bodem en " "bovenste oppervlakte zijn hiervan uitgezonderd" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Dit maakt spiralen mogelijk, waardoor de Z-bewegingen van de buitencontour " "worden afgevlakt en een solide model wordt omgezet in een enkelwandige print " "met solide onderlagen. Het uiteindelijke gegenereerde model heeft geen naad." msgid "Smooth Spiral" -msgstr "Smooth Spiral" +msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" msgid "Max XY Smoothing" -msgstr "Max XY Smoothing" - -msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" msgstr "" + +#, no-c-format, no-boost-format +msgid "" "Maximum distance to move points in XY to try to achieve a smooth spiral. If " -"expressed as a %, it will be computed over nozzle diameter" +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" +"Maximale afstand om punten in XY te verplaatsen om te proberen een gladde " +"spiraal te bereiken. Als het wordt uitgedrukt als een %, wordt het berekend " +"over de diameter van het mondstuk" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12555,9 +14975,9 @@ msgstr "" "samengevoegd tot een timelapse-video wanneer het afdrukken is voltooid. Als " "de vloeiende modus is geselecteerd, beweegt de gereedschapskop naar de " "afvoer chute nadat iedere laag is afgedrukt en maakt vervolgens een " -"momentopname. Aangezien het gesmolten filament uit de nozzle kan lekken " +"momentopname. Aangezien het gesmolten filament uit het mondstuk kan lekken " "tijdens het maken van een momentopname, is voor de soepele modus een " -"primetoren nodig om de nozzle schoon te vegen." +"primetoren nodig om het mondstuk schoon te vegen." msgid "Traditional" msgstr "Traditioneel" @@ -12565,19 +14985,44 @@ msgstr "Traditioneel" msgid "Temperature variation" msgstr "Temperatuur variatie" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "Start G-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Start G-code bij het starten van een print" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Start G-code wanneer het printen van dit filament begint" msgid "Single Extruder Multi Material" msgstr "Multi-material met één extruder" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" msgid "Manual Filament Change" @@ -12594,7 +15039,7 @@ msgstr "" msgid "Purge in prime tower" msgstr "" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "" msgid "Enable filament ramming" @@ -12604,8 +15049,8 @@ msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12665,10 +15110,11 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"Deze waarde wordt toegevoegd (of afgetrokken) van alle Z-coördinaten in de G-" -"code. Het wordt gebruikt voor een slechte Z-eindstop positie. Als de Z-" -"eindstop bijvoorbeeld een waarde gebruikt die 0.3mm van het printbed is, kan " -"dit ingesteld worden op -0.3mm." +"Deze waarde wordt toegevoegd (of afgetrokken) van alle Z-coördinaten in de " +"uitvoer-G-code. Het wordt gebruikt om een ​​slechte Z-eindstoppositie te " +"compenseren. Bijvoorbeeld, als de eindstopnul eigenlijk 0,3 mm overlaat " +"tussen het mondstuk en het printbed, stelt u dit in op -0,3 (of maak uw " +"eindstop goed vast)." msgid "Enable support" msgstr "Support inschakelen" @@ -12676,33 +15122,40 @@ msgstr "Support inschakelen" msgid "Enable support generation." msgstr "Dit maakt het genereren van support mogelijk." +#, fuzzy msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normal(auto) en tree(auto) worden gebruikt om automatisch steun te " -"genereren. Als normaal(handmatig) of tree(handmatig) is geselecteerd, worden " -"alleen ondersteuningen handhavers gegenereerd." +"normal (auto) en tree (auto) worden gebruikt om automatisch steun te " +"genereren. Als normaal (handmatig) of tree (handmatig) is geselecteerd, " +"worden alleen ondersteuningen handhavers gegenereerd." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "Normaal (automatisch)" -msgid "tree(auto)" -msgstr "tree(auto)" +msgid "Tree (auto)" +msgstr "Tree (auto)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "normaal (handmatig)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "tree (handmatig)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Support/object XY afstand" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Dit regelt de XY-afstand tussen een object en zijn support." +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "Patroon hoek" @@ -12714,7 +15167,7 @@ msgstr "" msgid "On build plate only" msgstr "Alleen op het printbed" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Deze instelling genereert alleen support die begint op het printbed." msgid "Support critical regions only" @@ -12727,23 +15180,23 @@ msgstr "" "Creëer alleen ondersteuning voor kritieke gebieden, waaronder sharp tail, " "cantilever, etc." -msgid "Remove small overhangs" -msgstr "Kleine uitsteeksels verwijderen" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Verwijder kleine overstekken die mogelijk geen steun nodig hebben." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Top Z afstand" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" "Dit bepaald de Z-afstand tussen de bovenste support interfaces en het object." msgid "Bottom Z distance" msgstr "Onderste Z-afstand" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "De z-opening tussen de onderste ondersteuningsinterface en het object" msgid "Support/raft base" @@ -12751,7 +15204,7 @@ msgstr "Support/raft base" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filament voor het printen van ondersteuning (support) en raft. \"Standaard\" " "betekent geen specifiek filament voor ondersteuning (support) en het " @@ -12785,7 +15238,7 @@ msgstr "Support/raft interface" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament om ondersteuning (support) te printen. \"Standaard\" betekent geen " "specifiek filament voor ondersteuning (support), en het huidige filament " @@ -12794,13 +15247,13 @@ msgstr "" msgid "Top interface layers" msgstr "Bovenste interface lagen" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Dit is het aantal bovenste interfacelagen." msgid "Bottom interface layers" msgstr "Onderste interfacelagen" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Aantal onderste interfacelagen" msgid "Same as top" @@ -12809,25 +15262,26 @@ msgstr "Hetzelfde als boven" msgid "Top interface spacing" msgstr "Bovenste interface-afstand" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Dit is de afstand tussen de interfacelijnen. 0 betekent solide interface." msgid "Bottom interface spacing" msgstr "Onderste interface-afstand" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Dit is de afstand tussen de onderste interfacelijnen. 0 betekent solide " "interface." -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Dit is de snelheid voor het printen van de support interfaces." msgid "Base pattern" msgstr "Basis patroon" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Dit is het lijnpatroon voor support." msgid "Rectilinear grid" @@ -12842,30 +15296,30 @@ msgstr "Interfacepatroon" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Dit is het lijnpatroon voor support interfaces. Het standaardpatroon voor " "niet-oplosbare support interfaces is Rechtlijnig, terwijl het " "standaardpatroon voor oplosbare support interfaces Concentrisch is." msgid "Rectilinear Interlaced" -msgstr "Rectilinear Interlaced" +msgstr "" msgid "Base pattern spacing" msgstr "Basis patroon afstand" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Dit bepaald de ruimte tussen de support lijnen." msgid "Normal Support expansion" msgstr "Normale uitbreiding van de ondersteuning" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" "Vergroot (+) of verklein (-) het horizontale bereik van de normale " "ondersteuning" -msgid "Speed of support" +msgid "Speed of support." msgstr "Dit is de snelheid voor het printen van support." msgid "" @@ -12878,9 +15332,15 @@ msgid "" "overhangs." msgstr "" +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" msgstr "Nauwsluitend" +msgid "Organic" +msgstr "" + msgid "Tree Slim" msgstr "Tree Slim" @@ -12890,20 +15350,14 @@ msgstr "Tree Strong" msgid "Tree Hybrid" msgstr "Tree Hybrid" -msgid "Organic" -msgstr "" - msgid "Independent support layer height" msgstr "Onafhankelijke support laaghoogte" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " -"when the prime tower is enabled." msgid "Threshold angle" msgstr "Drempel hoek" @@ -12915,12 +15369,21 @@ msgstr "" "Er zal ondersteuning support gegenereerd worden voor overhangende hoeken " "waarvan de hellingshoek lager is dan deze drempel." +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "Tree support vertakkingshoek" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Deze instelling bepaalt de maximale overhanghoek die de uitloop van de tree " @@ -12958,26 +15421,18 @@ msgid "" "needed." msgstr "" -msgid "Adaptive layer height" -msgstr "Adaptieve laaghoogte" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - msgid "Auto brim width" msgstr "" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" msgid "Tree support brim width" msgstr "Tree support brim width" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" msgid "Tip Diameter" @@ -13005,82 +15460,110 @@ msgid "" "support." msgstr "" -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" - msgid "Support wall loops" msgstr "Steunmuurlussen" -msgid "This setting specify the count of walls around support" -msgstr "Deze instelling specificeert het aantal muren rond de ondersteuning" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" msgid "Tree support with infill" msgstr "Tree support met vulling" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Deze instelling geeft aan of er opvulling moet worden toegevoegd in grote " "holtes van de tree support." -msgid "Activate temperature control" +msgid "Ironing Support Interface" msgstr "" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + +msgid "Activate temperature control" +msgstr "Temperatuurregeling activeren" + +msgid "" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" msgid "Chamber temperature" msgstr "Kamertemperatuur" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on. At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials, the actual chamber temperature should not " -"be high to avoid clogs, so 0 (turned off) is highly recommended." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Nozzle temperatuur voor de lagen na de eerstse laag" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Mondstuk temperatuur voor de lagen na de eerste laag" msgid "Detect thin wall" msgstr "Detecteer dunne wanden" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Dit detecteert dunne wanden die geen twee lijnen kunnen bevatten en gebruikt " "een enkele lijn tijdens het printen. Het kan zijn dat de kwaliteit minder " "goed is, omdat er geen gesloten lus is" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Deze G-code wordt ingevoegd wanneer filament wordt vervangen, inclusief T-" "commando's om gereedschapswissel te activeren." -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" msgid "" @@ -13088,7 +15571,7 @@ msgid "" "the nozzle diameter." msgstr "" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "" "Dit is de snelheid voor de solide vulling (infill) van de bovenste laag" @@ -13098,7 +15581,7 @@ msgstr "Aantal lagen bovenkant" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Dit is het aantal solide lagen van de bovenkant, inclusief de bovenste " "oppervlaktelaag. Wanneer de door deze waarde berekende dikte dunner is dan " @@ -13114,8 +15597,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Het aantal bovenste solide lagen wordt verhoogd tijdens het slicen als de " "totale dikte van de bovenste lagen lager is dan deze waarde. Dit zorgt " @@ -13123,31 +15606,51 @@ msgstr "" "deze instelling niet actief is en dat de dikte van de bovenkant bepaald " "wordt door het aantal bodem lagen." -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Dit is de snelheid waarmee verplaatsingen zullen worden gedaan." msgid "Wipe while retracting" msgstr "Vegen tijdens intrekken (retracting)" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"Dit beweegt de nozzle langs het laatste extrusiepad bij het terugtrekken " +"Dit beweegt het mondstuk langs het laatste extrusiepad bij het terugtrekken " "(retraction) om eventueel gelekt materiaal op het mondstuk te reinigen. Dit " "kan \"blobs\" minimaliseren bij het printen van een nieuw onderdeel na het " -"verplaatsen." +"verplaatsen" msgid "Wipe Distance" msgstr "Veeg afstand" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -13158,9 +15661,15 @@ msgid "" "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"The wiping tower can be used to clean up residue on the nozzle and stabilize " -"the chamber pressure inside the nozzle in order to avoid appearance defects " -"when printing objects." +"De veegtoren kan worden gebruikt om resten op het mondstuk te verwijderen en " +"de druk in het mondstuk te stabiliseren om uiterlijke gebreken bij het " +"printen van objecten te voorkomen." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "Volumes opschonen" @@ -13183,15 +15692,20 @@ msgstr "" "Dit is het volume van het materiaal dat de extruder op de prime toren " "uitwerpt." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Dit is de breedte van de prime toren." msgid "Wipe tower rotation angle" msgstr "Rotatie van het afveegblok" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Rotatie van het afveegblok ten opzichte van de X-as." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "" @@ -13200,12 +15714,6 @@ msgid "" "Larger angle means wider base." msgstr "" -msgid "Wipe tower purge lines spacing" -msgstr "" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "" - msgid "Maximum wipe tower print speed" msgstr "" @@ -13223,7 +15731,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13231,7 +15739,37 @@ msgid "" "regardless of this setting." msgstr "" -msgid "Wipe tower extruder" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." msgstr "" msgid "" @@ -13240,13 +15778,29 @@ msgid "" msgstr "" msgid "Purging volumes - load/unload volumes" -msgstr "" +msgstr "Afveegvolume - laad/ontlaad volumes" msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" +"Deze vector bespaart de benodigde volumes om van/naar elke extruder dat op " +"het afveegblok wordt gebruikt te wisselen. Deze waarden worden gebruikt om " +"het creëren van de onderstaande volledige reinigingsvolumes te " +"vereenvoudigen." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13272,13 +15826,13 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"Dit object wordt gebruikt om de nozzle te reinigen nadat het filament is " +"Dit object wordt gebruikt om het mondstuk te reinigen nadat het filament is " "vervangen om filament te besparen en de printtijd te verkorten. Als " "resultaat worden de kleuren van de objecten gemengd. Het wordt niet van " -"kracht tenzij de prime tower is ingeschakeld." +"kracht tenzij de prime toren is ingeschakeld." msgid "Maximal bridging distance" msgstr "Maximale brugafstand" @@ -13286,13 +15840,39 @@ msgstr "Maximale brugafstand" msgid "Maximal distance between supports on sparse infill sections." msgstr "Maximale afstand tussen support op dunne vullingsdelen." +msgid "Wipe tower purge lines spacing" +msgstr "" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "" + +msgid "Extra flow for purging" +msgstr "" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" + +msgid "Idle temperature" +msgstr "" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" + msgid "X-Y hole compensation" msgstr "X-Y-gaten compensatie" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Gaten in objecten worden met de ingestelde waarde groter of kleiner in het " "XY-vlak. Positieve waarden maken de gaten groter en negatieve waarden maken " @@ -13302,11 +15882,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "X-Y contourcompensatie" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "De contouren van objecten worden met de ingestelde waarde in het XY-vlak " "groter of kleiner gemaakt. Positieve waarden maken contouren groter en " @@ -13330,7 +15911,7 @@ msgstr "" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13348,13 +15929,15 @@ msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" +"Afbeeldingsgrootte wordt opgeslagen in de .gcode en .sl1 / .sl1s bestanden " +"in het formaat: \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" msgstr "Bestandstype van G-code-voorbeelden" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Bestandstype van G-code-voorbeelden: PNG voor de beste kwaliteit, JPG voor " "kleinste bestand, QOI voor firmware met weinig geheugen" @@ -13363,24 +15946,25 @@ msgid "Use relative E distances" msgstr "Relatieve E-afstanden gebruiken" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" +"Relatieve extrusie wordt aanbevolen bij gebruik van de optie \"label_objects" +"\". Sommige extruders werken beter als deze optie niet is aangevinkt " +"(absolute extrusiemodus). Wipe tower is alleen compatibel met relatieve " +"modus. Het wordt aanbevolen op de meeste printers. Standaard is aangevinkt" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "De klassieke wandgenerator produceert wanden met constante extrusiebreedte " "en voor zeer dunne gebieden wordt gap-fill gebruikt. De Arachne generator " "produceert wanden met variabele extrusiebreedte." -msgid "Classic" -msgstr "Klassiek" - msgid "Arachne" msgstr "Arachne" @@ -13390,12 +15974,12 @@ msgstr "Lengte wandovergang" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Bij de overgang tussen verschillende aantallen muren naarmate het onderdeel " "dunner wordt, wordt een bepaalde hoeveelheid ruimte toegewezen om de " "wandsegmenten te splitsen of samen te voegen. Dit wordt uitgedrukt als een " -"percentage ten opzichte van de diameter van de nozzle." +"percentage ten opzichte van de diameter van het mondstuk." msgid "Wall transitioning filter margin" msgstr "Marge van het filter voor wandovergang" @@ -13407,7 +15991,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Voorkom heen en weer schakelen tussen een extra wand en een wand minder. " "Deze marge breidt het bereik van extrusiebreedten uit dat volgt op [Minimum " @@ -13415,7 +15999,7 @@ msgstr "" "vergroten, wordt het aantal overgangen verminderd, waardoor het aantal " "extrusie-starts/-stops en travel tijd wordt verminderd. Grote variaties in " "de extrusiebreedte kunnen echter leiden tot onder- of overextrusieproblemen. " -"Het wordt uitgedrukt als een percentage over de diameter van de nozzle" +"Het wordt uitgedrukt als een percentage over de diameter van het mondstuk" msgid "Wall transitioning threshold angle" msgstr "Drempelhoek voor wandovergang" @@ -13425,7 +16009,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Wanneer moet u overgangen maken tussen even en oneven aantallen muren? Een " "wigvorm met een hoek groter dan deze instelling heeft geen overgangen en er " @@ -13438,7 +16022,7 @@ msgstr "Aantal wandverdelingen" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Het aantal wanden, geteld vanuit het midden, waarover de variatie moet " "worden verdeeld. Lagere waarden betekenen dat de buitenwanden niet in " @@ -13449,38 +16033,36 @@ msgstr "Minimale kenmerkgrootte" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minimale dikte van dunne onderdelen. Modelkenmerken die dunner zijn dan deze " -"waarde worden niet afgedrukt, terwijl functies die dikker zijn dan de " -"minimale afmeting van het object, worden verbreed tot de minimale " -"wandbreedte. Dit wordt uitgedrukt als een percentage ten opzichte van de " -"diameter van het mondstuk" msgid "Minimum wall length" -msgstr "" +msgstr "Minimale wandlengte" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" msgid "First layer minimum wall width" -msgstr "" +msgstr "Eerste laag minimale wandbreedte" msgid "" "The minimum wall width that should be used for the first layer is " "recommended to be set to the same size as the nozzle. This adjustment is " "expected to enhance adhesion." msgstr "" +"De minimale wandbreedte die voor de eerste laag moet worden gebruikt, wordt " +"aanbevolen om op dezelfde grootte als het mondstuk te worden ingesteld. Deze " +"aanpassing zal naar verwachting de hechting verbeteren." msgid "Minimum wall width" msgstr "Minimale wandbreedte" @@ -13489,20 +16071,20 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Breedte van de muur die dunne delen (volgens de minimale functiegrootte) van " "het model zal vervangen. Als de minimale wandbreedte dunner is dan de dikte " "van het element, wordt de muur net zo dik als het object zelf. Dit wordt " -"uitgedrukt als een percentage ten opzichte van de diameter van de nozzle" +"uitgedrukt als een percentage ten opzichte van de diameter van het mondstuk" msgid "Detect narrow internal solid infill" msgstr "Detecteer dichte interne solide vulling (infill)" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Deze optie detecteert automatisch smalle interne solide opvul (infill) " "gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt voor " @@ -13510,51 +16092,242 @@ msgstr "" "rechtlijnige patroon gebruikt." msgid "invalid value " -msgstr "invalid value " +msgstr "" msgid "Invalid value when spiral vase mode is enabled: " -msgstr "Invalid value when spiral vase mode is enabled: " +msgstr "" msgid "too large line width " -msgstr "too large line width " +msgstr "" msgid " not in range " -msgstr " not in range " +msgstr "" + +msgid "Export 3MF" +msgstr "Exporteer 3mf" + +msgid "Export project as 3MF." +msgstr "Dit exporteert het project als 3MF." + +msgid "Export slicing data" +msgstr "Exporteer slicinggegevens" + +msgid "Export slicing data to a folder." +msgstr "Exporteer slicinggegevens naar een map" + +msgid "Load slicing data" +msgstr "Laad slicinggegevens" + +msgid "Load cached slicing data from directory." +msgstr "Laad slicinggegevens in de cache uit de directory" + +msgid "Export STL" +msgstr "STL exporteren" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "Slice" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Slice de printbedden: 0-alle printbedden, i-printbed i, andere-onjuist" + +msgid "Show command help." +msgstr "Dit toont de command hulp." + +msgid "UpToDate" +msgstr "UpToDate" + +msgid "Update the config values of 3MF to latest." +msgstr "Update de configuratiewaarden van 3MF naar de nieuwste versie." + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "Standaard filamenten laden" + +msgid "Load first filament as default for those not loaded." +msgstr "Laad standaard het eerste filament voor degenen die niet zijn geladen" msgid "Minimum save" msgstr "" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." +msgstr "" + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "" + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." msgstr "" msgid "No check" -msgstr "No check" +msgstr "Geen controle" -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "Do not run any validity checks, such as G-code path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" + +msgid "Normative check" +msgstr "" + +msgid "Check the normative items." +msgstr "" + +msgid "Output Model Info" +msgstr "Model informatie weergeven" + +msgid "Output the model's information." +msgstr "Dit geeft de informatie van het model weer." + +msgid "Export Settings" +msgstr "Exporteer instellingen" + +msgid "Export settings to a file." +msgstr "Exporteer instellingen naar een bestand" + +msgid "Send progress to pipe" +msgstr "Stuur voortgang naar pipe" + +msgid "Send progress to pipe." +msgstr "Stuur voortgang naar pipe" + +msgid "Arrange Options" +msgstr "Rangschik opties" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Rangschik opties: 0-uitzetten, 1-aanzetten, anders-automatisch" + +msgid "Repetition count" +msgstr "Aantal herhalingen" + +msgid "Repetition count of the whole model." +msgstr "Aantal herhalingen van het hele model" msgid "Ensure on bed" msgstr "Plaats op bed" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Schik de toegevoegde modellen en combineer ze tot één model om eenmalig " +"acties uit te voeren." + +msgid "Convert Unit" +msgstr "Eenheid converteren" + +msgid "Convert the units of model." +msgstr "Converteer de eenheden van het model" + msgid "Orient Options" -msgstr "" +msgstr "Oriëntatieopties" msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "" +msgstr "Oriëntatieopties: 0-uitschakelen, 1-inschakelen, andere-automatisch" msgid "Rotation angle around the Z axis in degrees." msgstr "Rotatiehoek rond de Z-as in graden." +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "Draai over de Y-as" msgid "Rotation angle around the Y axis in degrees." msgstr "Rotatiehoek rond de Y-as in graden." +msgid "Scale the model by a float factor." +msgstr "Schaal het model met een float-factor" + +msgid "Load General Settings" +msgstr "Standaard instellingen laden" + +msgid "Load process/machine settings from the specified file." +msgstr "Proces/machine instellingen laden vanuit een gekozen bestand" + +msgid "Load Filament Settings" +msgstr "Filament instellingen laden" + +msgid "Load filament settings from the specified file list." +msgstr "Filament instellingen laden vanuit een bestandslijst" + +msgid "Skip Objects" +msgstr "" + +msgid "Skip some objects in this print." +msgstr "" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"laad actuele proces-/machine-instellingen uit het opgegeven bestand bij " +"gebruik van up-to-date" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "Bestandslocatie voor de data" @@ -13567,34 +16340,124 @@ msgstr "" "verschillende profielen of het opnemen van configuraties van een " "netwerkopslag." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Uitvoermap" + +msgid "Output directory for the exported files." +msgstr "Dit is de map waarin de geëxporteerde bestanden worden opgeslagen" + +msgid "Debug level" +msgstr "Debuggen level" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" msgstr "" -msgid "Load custom gcode from json" +msgid "Enable timelapse for print" msgstr "" -msgid "Current z-hop" +msgid "If enabled, this slicing will be considered using timelapse." msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Load custom G-code" +msgstr "Laad aangepaste G-code" + +msgid "Load custom G-code from json." +msgstr "Laad aangepaste G-code vanuit json." + +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" +msgstr "Huidige z-hop" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "" + +msgid "Absolute E position" +msgstr "" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" msgid "Current extruder" @@ -13636,7 +16499,14 @@ msgstr "" msgid "Is extruder used?" msgstr "" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "" + +msgid "Has single extruder MM priming" +msgstr "" + +msgid "Are the extra multi-material priming regions used in this print?" msgstr "" msgid "Volume per extruder" @@ -13645,10 +16515,10 @@ msgstr "" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "" msgid "Total volume" @@ -13698,7 +16568,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -13708,11 +16578,11 @@ msgid "Source filename of the first object, without extension." msgstr "" msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" @@ -13743,19 +16613,22 @@ msgid "Size of the print bed bounding box" msgstr "" msgid "Timestamp" -msgstr "" +msgstr "Tijdstempel" msgid "String containing current time in yyyyMMdd-hhmmss format." msgstr "" msgid "Day" -msgstr "" +msgstr "Dag" msgid "Hour" -msgstr "" +msgstr "Uur" msgid "Minute" -msgstr "" +msgstr "Minuut" + +msgid "Second" +msgstr "seconde(n)" msgid "Print preset name" msgstr "" @@ -13783,13 +16656,21 @@ msgstr "" msgid "Name of the physical printer used for slicing." msgstr "" +msgid "Number of extruders" +msgstr "" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" + msgid "Layer number" msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -13797,7 +16678,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -13822,119 +16703,91 @@ msgid "Generating infill toolpath" msgstr "Infill toolpath genereren" msgid "Detect overhangs for auto-lift" -msgstr "Detect overhangs for auto-lift" - -msgid "Generating support" -msgstr "Support genereren" +msgstr "" msgid "Checking support necessity" msgstr "Controleren of support is noodzakelijk" msgid "floating regions" -msgstr "floating regions" +msgstr "" msgid "floating cantilever" -msgstr "floating cantilever" +msgstr "" msgid "large overhangs" -msgstr "large overhangs" +msgstr "" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"It seems object %s has %s. Please re-orient the object or enable support " -"generation." + +msgid "Generating support" +msgstr "Support genereren" msgid "Optimizing toolpath" msgstr "Optimaliseren van het pad" msgid "Slicing mesh" -msgstr "Slicing mesh" +msgstr "" msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"No layers were detected. You might want to repair your STL file(s) or check " -"their size or thickness and retry.\n" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" -"An object's XY size compensation will not be used because it is also color-" -"painted.\n" -"XY Size compensation can not be combined with color-painting." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Support: toolpad genereren op laag %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Support: detecteren van overhangende wanden" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Support: contactpunten genereren" -msgid "Support: propagate branches" -msgstr "Support: vertakkingen verspreiden" +msgid "Loading of a model file failed." +msgstr "" -msgid "Support: draw polygons" -msgstr "Support: polygonen tekenen" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Support: toolpath genereren" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Support: genereer polygonen op laag %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Support: repareer gaten op laag %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Support: verspreid takken op laag %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unknown file format: input file must have .stl, .obj, or .amf(.xml) " -"extension." - -msgid "Loading of a model file failed." -msgstr "Loading of model file failed." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "The supplied file couldn't be read because it's empty." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "Unknown file format: input file must have .3mf or .zip.amf extension." - -msgid "Canceled" -msgstr "Canceled" +msgstr "" msgid "load_obj: failed to parse" -msgstr "load_obj: failed to parse" +msgstr "" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "" msgid "The file contains polygons with more than 4 vertices." -msgstr "The file contains polygons with more than 4 vertices." +msgstr "" msgid "The file contains polygons with less than 2 vertices." -msgstr "The file contains polygons with less than 2 vertices." +msgstr "" msgid "The file contains invalid vertex index." -msgstr "The file contains invalid vertex index." +msgstr "" msgid "This OBJ file couldn't be read because it's empty." -msgstr "This OBJ file couldn't be read because it's empty." +msgstr "" msgid "Flow Rate Calibration" msgstr "Flow Rate kalibratie" @@ -13952,7 +16805,7 @@ msgid "Result can be read by human eyes." msgstr "Het resultaat kan door mensenogen worden gelezen." msgid "Auto-Calibration" -msgstr "Auto-Calibration" +msgstr "" msgid "We would use Lidar to read the calibration result" msgstr "We zouden Lidar gebruiken om het kalibratieresultaat af te lezen" @@ -14009,7 +16862,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Voer geldige waarden in:\n" "Startwaarde: >= %.1f\n" @@ -14021,7 +16874,7 @@ msgid "The name cannot be empty." msgstr "De naam mag niet leeg zijn." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "De geselecteerde preset: %s is niet gevonden." msgid "The name cannot be the same as the system preset name." @@ -14034,11 +16887,17 @@ msgstr "De naam is hetzelfde als een andere bestaande presetnaam" msgid "create new preset failed." msgstr "nieuwe voorinstelling maken mislukt." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Are you sure you want to cancel the current calibration and return to the " -"home page?" msgid "No Printer Connected!" msgstr "Geen printer aangesloten!" @@ -14056,23 +16915,20 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" +"Dit type machine kan slechts 16 historische resultaten per mondstuk " +"bevatten. U kunt de bestaande historische resultaten verwijderen en " +"vervolgens de kalibratie starten. Of u kunt doorgaan met de kalibratie, maar " +"u kunt geen nieuwe historische kalibratieresultaten maken.\n" +"Wilt u de kalibratie nog steeds voortzetten?" -msgid "Connecting to printer..." -msgstr "Aansluiten op de printer..." - -msgid "The failed test result has been dropped." -msgstr "Het mislukte testresultaat is verwijderd." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Flow Dynamics kalibratieresultaat is opgeslagen in de printer" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -14084,13 +16940,29 @@ msgstr "" "één resultaat met een naam opgeslagen. Weet je zeker dat je het vorige " "resultaat wilt overschrijven?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." +"Dit type machine kan slechts %d historische resultaten per mondstuk " +"bevatten. Dit resultaat wordt niet opgeslagen." + +msgid "Connecting to printer..." +msgstr "Aansluiten op de printer..." + +msgid "The failed test result has been dropped." +msgstr "Het mislukte testresultaat is verwijderd." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Flow Dynamics kalibratieresultaat is opgeslagen in de printer" msgid "Internal Error" msgstr "Interne fout" @@ -14098,12 +16970,12 @@ msgstr "Interne fout" msgid "Please select at least one filament for calibration" msgstr "Selecteer ten minste één filament voor kalibratie" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" "Het resultaat van de debietkalibratie is opgeslagen in een " "voorkeursinstelling." -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "Het kalibratieresultaat van de maximale volumetrische snelheid is opgeslagen " "in de vooraf ingestelde waarde" @@ -14117,19 +16989,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"We hebben nu de automatische kalibratie voor verschillende filamenten " -"toegevoegd. Deze is volledig geautomatiseerd en het resultaat wordt " -"opgeslagen in de printer voor toekomstig gebruik. Je hoeft de kalibratie " -"alleen uit te voeren in de volgende beperkte gevallen:\n" -"1. Als je een nieuw filament van een ander merk/model introduceert of als " -"het filament vochtig is;\n" -"2. Als de spuitmond versleten is of vervangen is door een nieuwe;\n" -"3. Als de maximale volumetrische snelheid of printtemperatuur is gewijzigd " -"in de filamentinstelling." msgid "About this calibration" msgstr "Over deze kalibratie" @@ -14161,22 +17024,13 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -14221,22 +17075,6 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not " -"be suitable for this calibration and can produce less-than-desirable " -"results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before performing it." msgid "When you need Max Volumetric Speed Calibration" msgstr "Wanneer u maximale volumetrische snelheidskalibratie nodig hebt" @@ -14272,22 +17110,12 @@ msgstr "" "*We raden je aan om merk, materiaal, type en zelfs vochtigheidsgraad toe te " "voegen in de Naam." -msgid "Failed" -msgstr "Mislukt" - msgid "Please enter the name you want to save to printer." msgstr "Voer de naam in die u op de printer wilt opslaan." msgid "The name cannot exceed 40 characters." msgstr "De naam mag niet langer zijn dan 40 tekens." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Slechts één van de resultaten met dezelfde naam wordt opgeslagen. Weet je " -"zeker dat je de andere resultaten wilt overschrijven?" - msgid "Please find the best line on your plate" msgstr "Zoek de beste regel op je bord" @@ -14300,9 +17128,6 @@ msgstr "Invoerwaarde" msgid "Save to Filament Preset" msgstr "Opslaan in filamentvoorinstellingen" -msgid "Preset" -msgstr "Voorinstelling" - msgid "Record Factor" msgstr "Recordfactor" @@ -14337,9 +17162,6 @@ msgstr "Kalibratie overslaan2" msgid "flow ratio : %s " msgstr "Stroomverhouding : %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Kies een blok met de gladste bovenkant" - msgid "Please choose a block with smoothest top surface." msgstr "Kies een blok met de gladste bovenkant." @@ -14369,22 +17191,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Afdrukparameters" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" -msgstr "Plate Type" +msgstr "" msgid "filament position" msgstr "filament positie" -msgid "External Spool" -msgstr "Externe spoel" - msgid "Filament For Calibration" msgstr "Filament voor kalibratie" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Tips voor kalibratiemateriaal: \n" "- Materialen die dezelfde warmbedtemperatuur kunnen delen\n" @@ -14404,9 +17241,23 @@ msgstr "%s is niet compatibel met %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU wordt niet ondersteund voor automatische Flow Dynamics-kalibratie." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Verbinding maken met printer" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Van k Waarde" @@ -14414,7 +17265,7 @@ msgid "To k Value" msgstr "Naar k Waarde" msgid "Step value" -msgstr "" +msgstr "Stap waarde" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "" @@ -14426,11 +17277,14 @@ msgstr "Van Volumetric Speed" msgid "To Volumetric Speed" msgstr "Naar volumetrische snelheid" +msgid "Are you sure you want to cancel this print?" +msgstr "Weet je zeker dat je deze print wilt annuleren?" + msgid "Flow Dynamics Calibration Result" msgstr "Kalibratieresultaat van Flow Dynamics" msgid "New" -msgstr "New" +msgstr "" msgid "No History Result" msgstr "Geen geschiedenisresultaat" @@ -14446,25 +17300,39 @@ msgstr "Actie" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" +"Dit type machine kan slechts %d historische resultaten per mondstuk bevatten." msgid "Edit Flow Dynamics Calibration" msgstr "Flow Dynamics-kalibratie bewerken" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "" msgid "Ok" msgstr "Ok" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "" + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" msgstr "Netwerk opzoeken" msgid "Address" -msgstr "Address" +msgstr "" msgid "Hostname" msgstr "Hostnaam" @@ -14482,25 +17350,24 @@ msgid "Finished" msgstr "Voltooid" msgid "Multiple resolved IP addresses" -msgstr "" +msgstr "Meerdere vastgestelde IP-adressen" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" +"Er zijn meerdere IP-adressen die verwijzen naar hostname %1%.\n" +"Selecteer er een die gebruikt moet worden." msgid "PA Calibration" msgstr "PA-kalibratie" -msgid "DDE" -msgstr "" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" -msgstr "" +msgstr "Extrudertype" + +msgid "DDE" +msgstr "DDE" msgid "PA Tower" msgstr "PA-toren" @@ -14520,14 +17387,32 @@ msgstr "PA beëindigen: " msgid "PA step: " msgstr "PA-stap:" +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" + msgid "Print numbers" msgstr "Cijfers afdrukken" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Voer geldige waarden in:\n" "PA starten: >= 0,0\n" @@ -14537,6 +17422,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Temperatuurkalibratie" +msgid "Filament type" +msgstr "Filamenttype" + msgid "PLA" msgstr "PLA" @@ -14547,7 +17435,7 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" msgstr "TPU" @@ -14558,9 +17446,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filamenttype" - msgid "Start temp: " msgstr "Starttemp:" @@ -14570,11 +17455,14 @@ msgstr "Eindtemp:" msgid "Temp step: " msgstr "Temp stap:" +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" @@ -14586,14 +17474,14 @@ msgstr "Volumetrische snelheid starten:" msgid "End volumetric speed: " msgstr "Volumetrische eindsnelheid:" -msgid "step: " -msgstr "stap:" +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "VFA test" @@ -14605,11 +17493,14 @@ msgstr "Startsnelheid:" msgid "End speed: " msgstr "Eindsnelheid:" +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "Start retraction length: " @@ -14618,10 +17509,131 @@ msgstr "Begin terugtreklengte:" msgid "End retraction length: " msgstr "Beëindig terugtreklengte: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Stuur G-code naar printerhost" msgid "Upload to Printer Host with the following filename:" @@ -14632,10 +17644,10 @@ msgstr "" "Gebruik indien nodig schuine strepen (/) als scheidingsteken voor mappen." msgid "Upload to storage" -msgstr "" +msgstr "Uploaden naar opslag" msgid "Switch to Device tab after upload." -msgstr "" +msgstr "Na het uploaden naar het tabblad Apparaat gaan." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" @@ -14658,7 +17670,7 @@ msgstr "Host" msgctxt "OfFile" msgid "Size" -msgstr "Maat" +msgstr "Grootte" msgid "Filename" msgstr "Bestandsnaam" @@ -14669,16 +17681,33 @@ msgstr "Annuleer geselecteerde" msgid "Show error message" msgstr "Foutmelding tonen" -msgid "Enqueued" +msgid "Queued" msgstr "In de wachtrij" msgid "Uploading" msgstr "Uploaden" -msgid "Cancelling" +msgid "Canceling" msgstr "Annuleren" msgid "Error uploading to print host" +msgstr "Fout bij uploaden naar printhost" + +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" msgstr "" msgid "Unable to perform boolean operation on selected parts" @@ -14733,7 +17762,7 @@ msgid "Export Log" msgstr "Logboek exporteren" msgid "Snapmaker Orca Version:" -msgstr "" +msgstr "Snapmaker Orca-versie:" msgid "System Version:" msgstr "Systeemversie:" @@ -14741,17 +17770,17 @@ msgstr "Systeemversie:" msgid "DNS Server:" msgstr "DNS-server:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "" msgid "Test bing.com:" -msgstr "Test bing.com:" +msgstr "" msgid "Log Info" msgstr "Log-informatie" @@ -14811,7 +17840,7 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "Custom vendor missing; please input custom vendor." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" of \"Generic\" kan niet worden gebruikt als leverancier voor " "aangepaste filamenten." @@ -14819,7 +17848,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "Het type draad is niet geselecteerd, selecteer het type opnieuw." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "Filament serial missing; please input serial." msgid "" @@ -14834,8 +17863,8 @@ msgstr "" "Alle ingangen in de aangepaste verkoper of serie zijn spaties. Voer opnieuw " "in." -msgid "The vendor can not be a number. Please re-enter." -msgstr "The vendor can not be a number; please re-enter." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "" msgid "" "You have not selected a printer or preset yet. Please select at least one." @@ -14844,11 +17873,11 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"De filamentnaam %s die je hebt gemaakt, bestaat al. \n" +"De filamentnaam %s die je hebt gemaakt, bestaat al.\n" "Als u doorgaat, wordt de gemaakte voorinstelling weergegeven met de " "volledige naam. Wilt u doorgaan?" @@ -14864,8 +17893,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" @@ -14889,21 +17918,27 @@ msgstr "Preset importeren" msgid "Create Type" msgstr "Type maken" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "The model was not found; please reselect vendor." -msgid "Select Model" -msgstr "Model kiezen" - msgid "Select Printer" msgstr "Selecteer printer" +msgid "Select Model" +msgstr "Model kiezen" + msgid "Input Custom Model" msgstr "Invoer aangepast model" msgid "Can't find my printer model" msgstr "Kan mijn printermodel niet vinden" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Rechthoek" @@ -14913,15 +17948,9 @@ msgstr "Printbare ruimte" msgid "Hot Bed STL" msgstr "Warm bed STL" -msgid "Load stl" -msgstr "Stl laden" - msgid "Hot Bed SVG" msgstr "Warm bed SVG" -msgid "Load svg" -msgstr "svg laden" - msgid "Max Print Height" msgstr "Max. afdrukhoogte" @@ -14932,16 +17961,16 @@ msgstr "Het bestand is groter dan %d MB, importeer opnieuw." msgid "Exception in obtaining file size, please import again." msgstr "Uitzondering in het verkrijgen van bestandsgrootte, importeer opnieuw." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Preset-pad niet gevonden; selecteer leverancier opnieuw." msgid "The printer model was not found, please reselect." msgstr "Het printermodel is niet gevonden, selecteer opnieuw." -msgid "The nozzle diameter is not found, place reselect." -msgstr "The nozzle diameter was not found; please reselect." +msgid "The nozzle diameter was not found, please reselect." +msgstr "De diameter van het mondstuk is niet gevonden. Selecteer opnieuw." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "The printer preset was not found; please reselect." msgid "Printer Preset" @@ -14956,9 +17985,6 @@ msgstr "Alles deselecteren" msgid "Process Preset Template" msgstr "Vooraf ingesteld proces sjabloon" -msgid "Back Page 1" -msgstr "Terug Pagina 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -14973,9 +17999,6 @@ msgstr "" "U hebt een niet toegestaan teken ingevoerd in het gedeelte van het " "afdrukbare gebied op de eerste pagina. Gebruik alleen cijfers." -msgid "The custom printer or model is not inputed, place input." -msgstr "The custom printer or model missing; please input." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15005,14 +18028,14 @@ msgstr "Voorinstellingen voor filament maken mislukt. Als volgt:\n" msgid "Create process presets failed. As follows:\n" msgstr "Procesvoorinstellingen maken mislukt. Als volgt:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Leverancier is niet gevonden; selecteer opnieuw." msgid "Current vendor has no models, please reselect." msgstr "De huidige leverancier heeft geen modellen. Selecteer opnieuw." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "U hebt de verkoper en het model niet geselecteerd of de aangepaste verkoper " @@ -15040,11 +18063,19 @@ msgstr "" "Je hebt de printer waarvoor je het mondstuk wilt vervangen nog niet " "geselecteerd; kies een printer." -msgid "Create Printer Successful" -msgstr "Printer succesvol maken" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" -msgid "Create Filament Successful" -msgstr "Filament Created Successfully" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "Printer succesvol gemaakt" + +msgid "Filament Created Successfully" +msgstr "Filament succesvol gemaakt" msgid "Printer Created" msgstr "Printer gemaakt" @@ -15072,9 +18103,16 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" +"\n" +"\n" +"Orca heeft gedetecteerd dat de synchronisatiefunctie voor uw " +"gebruikersinstellingen niet is ingeschakeld, wat kan resulteren in mislukte " +"Filament-instellingen op de pagina Apparaat.\n" +"Klik op \"Gebruikersinstellingen synchroniseren\" om de " +"synchronisatiefunctie in te schakelen." msgid "Printer Setting" msgstr "Printerinstelling" @@ -15110,7 +18148,7 @@ msgid "open zip written fail" msgstr "open zip geschreven mislukt" msgid "Export successful" -msgstr "Export succesvol" +msgstr "Exporteren is gelukt" #, c-format, boost-format msgid "" @@ -15124,13 +18162,20 @@ msgstr "" "If not, a time suffix will be added, and you can modify the name after " "creation." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "Ingestelde preset vullingsset van de gebruiker.\n" @@ -15178,13 +18223,13 @@ msgid "Please select a type you want to export" msgstr "Selecteer het type preset dat je wilt exporteren" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" msgid "Edit Filament" msgstr "Bewerk filament" msgid "Filament presets under this filament" -msgstr "Presets onder deze gloeidraad" +msgstr "Voorinstellingen voor filament onder dit filament" msgid "" "Note: If the only preset under this filament is deleted, the filament will " @@ -15193,18 +18238,27 @@ msgstr "" "Opmerking: Als de enige preset onder deze gloeidraad wordt verwijderd, wordt " "de gloeidraad verwijderd na het verlaten van het dialoogvenster." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "" "Presets die door andere presets worden geërfd, kunnen niet worden verwijderd" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "" -msgstr[1] "" +msgstr[0] "De volgende voorinstellingen nemen deze voorinstelling over." +msgstr[1] "De volgende voorinstelling neemt deze voorinstelling over." msgid "Delete Preset" msgstr "Preset verwijderen" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Weet je zeker dat je de geselecteerde preset wilt verwijderen?\n" +"Als de voorinstelling overeenkomt met een filament dat momenteel in gebruik " +"is op je printer, reset dan de filamentinformatie voor die sleuf." + msgid "Are you sure to delete the selected preset?" msgstr "Weet je zeker dat je de geselecteerde preset wilt verwijderen?" @@ -15214,16 +18268,13 @@ msgstr "Preset verwijderen" msgid "+ Add Preset" msgstr "+ Preset toevoegen" -msgid "Delete Filament" -msgstr "Draad verwijderen" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Alle presets van het filament die bij dit filament horen, worden " -"verwijderd. \n" +"verwijderd.\n" "Als u dit filament gebruikt in uw printer, reset dan de filamentinformatie " "voor die sleuf." @@ -15252,25 +18303,40 @@ msgid "For more information, please check out Wiki" msgstr "For more information, please check out our Wiki" msgid "Collapse" -msgstr "Instorten" +msgstr "Inklappen" msgid "Daily Tips" msgstr "Dagelijkse tips" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "mondstuk onthouden: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Your nozzle diameter in preset is not consistent with the saved nozzle " -"diameter. Have you changed your nozzle?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Afdrukken%s materiaal mee%s kan schade aan het mondstuk veroorzaken" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Printer selecteren" @@ -15278,6 +18344,35 @@ msgstr "Printer selecteren" msgid "The start, end or step is not valid value." msgstr "Het begin, einde of stap is geen geldige waarde." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15298,16 +18393,13 @@ msgid "Success!" msgstr "Succes!" msgid "Are you sure to log out?" -msgstr "" - -msgid "Refresh Printers" -msgstr "Printers vernieuwen" +msgstr "Weet u zeker dat u wilt uitloggen?" msgid "View print host webui in Device tab" -msgstr "" +msgstr "Bekijk de printhost webui op het tabblad Apparaat" msgid "Replace the BambuLab's device tab with print host webui" -msgstr "" +msgstr "Vervang het apparaattabblad van BambuLab door de printhost webui" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" @@ -15338,7 +18430,7 @@ msgstr "" "Certificate Store / Keychain." msgid "Login/Test" -msgstr "" +msgstr "Inloggen/Test" msgid "Connection to printers connected via the print host failed." msgstr "Verbinding met printers aangesloten via de printhost mislukt." @@ -15347,22 +18439,22 @@ msgstr "Verbinding met printers aangesloten via de printhost mislukt." msgid "Mismatched type of print host: %s" msgstr "Verkeerd type afdrukhost: %s" -msgid "Connection to AstroBox works correctly." -msgstr "Connection to AstroBox is working correctly." +msgid "Connection to AstroBox is working correctly." +msgstr "" msgid "Could not connect to AstroBox" msgstr "Kan geen verbinding maken met AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Note: AstroBox version 1.1.0 or higher is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet is working correctly." +msgid "Connection to Duet is working correctly." +msgstr "" msgid "Could not connect to Duet" msgstr "Kan geen verbinding maken met Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Onbekende fout opgetreden" msgid "Wrong password" @@ -15374,8 +18466,8 @@ msgstr "Kan geen bronnen krijgen om een nieuwe verbinding te maken" msgid "Upload not enabled on FlashAir card." msgstr "Uploaden niet ingeschakeld op FlashAir-kaart." -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "Connection to FlashAir is working correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "" msgid "Could not connect to FlashAir" msgstr "Kan geen verbinding maken met FlashAir" @@ -15387,65 +18479,65 @@ msgstr "" "Opmerking: FlashAir met firmware 2.00.02 of nieuwer en geactiveerde " "uploadfunctie is vereist." -msgid "Connection to MKS works correctly." -msgstr "Connection to MKS is working correctly." +msgid "Connection to MKS is working correctly." +msgstr "" msgid "Could not connect to MKS" msgstr "Kan geen verbinding maken met MKS" -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint is working correctly." +msgid "Connection to OctoPrint is working correctly." +msgstr "" msgid "Could not connect to OctoPrint" msgstr "Kan geen verbinding maken met OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version 1.1.0 or higher is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Connection to Prusa SL1 / SL1S is working correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "" msgid "Could not connect to Prusa SLA" msgstr "Kan geen verbinding maken met Prusa SLA" -msgid "Connection to PrusaLink works correctly." -msgstr "Connection to PrusaLink is working correctly." +msgid "Connection to PrusaLink is working correctly." +msgstr "" msgid "Could not connect to PrusaLink" msgstr "Kan geen verbinding maken met PrusaLink" msgid "Storages found" -msgstr "" +msgstr "Gevonden opslagplaatsen" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" -msgstr "" +msgstr "%1% : alleen lezen" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" -msgstr "" +msgstr "%1% : geen vrije ruimte" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "" +msgstr "Upload is mislukt. Er is geen geschikte opslag gevonden op %1%." -msgid "Connection to Prusa Connect works correctly." -msgstr "" +msgid "Connection to Prusa Connect is working correctly." +msgstr "De verbinding met Prusa Connect werkt goed." msgid "Could not connect to Prusa Connect" -msgstr "" +msgstr "Kon geen verbinding maken met Prusa Connect" -msgid "Connection to Repetier works correctly." -msgstr "Connection to Repetier is working correctly." +msgid "Connection to Repetier is working correctly." +msgstr "De verbinding met Repetier werkt goed." msgid "Could not connect to Repetier" msgstr "Kan geen verbinding maken met Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Note: Repetier version 0.90.0 or higher is required." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "" #, boost-format msgid "" @@ -15476,255 +18568,488 @@ msgstr "" "Fout: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." +"Het heeft een kleine laaghoogte en resulteert in bijna verwaarloosbare " +"laaglijnen en een hoge afdrukkwaliteit. Het is geschikt voor de meeste " +"algemene afdrukgevallen." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" +"Vergeleken met het standaardprofiel van een 0,2 mm mondstuk, heeft het " +"lagere snelheden en acceleratie, en het spaarzame infill patroon is Gyroid. " +"Dit resulteert in een veel hogere printkwaliteit maar ook een veel langere " +"printtijd." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" +"Het heeft een normale laaghoogte en resulteert in gemiddelde laaglijnen en " +"afdrukkwaliteit. Het is geschikt voor de meeste afdrukgevallen." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"De laagdikte is groot, wat resulteert in zichtbare laaglijnen en een normale " +"afdrukkwaliteit en afdruktijd." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "No task" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "" + +msgid "Sent Time" +msgstr "" + +msgid "There are no tasks to be sent!" +msgstr "" + +msgid "No historical tasks!" +msgstr "" + +msgid "Upgrading" +msgstr "" + +msgid "syncing" +msgstr "" + +msgid "Printing Finish" +msgstr "" + +msgid "Printing Failed" +msgstr "" + +msgid "Printing Pause" +msgstr "" + +msgid "Pending" +msgstr "" + +msgid "Sending" +msgstr "Verzenden" + +msgid "Sending Finish" +msgstr "" + +msgid "Sending Cancel" +msgstr "" + +msgid "Sending Failed" +msgstr "" + +msgid "Print Success" +msgstr "" + +msgid "Print Failed" +msgstr "" + +msgid "Removed" +msgstr "" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" msgstr "" @@ -15739,30 +19064,133 @@ msgid "Could not connect to SimplyPrint" msgstr "" msgid "Internal error" -msgstr "" +msgstr "Interne fout" msgid "Unknown error" -msgstr "" +msgstr "Onbekende fout" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." msgstr "" msgid "Please give the required permissions when authorizing this application." -msgstr "" +msgstr "Geef de vereiste machtigingen wanneer u deze toepassing autoriseert." msgid "Something unexpected happened when trying to log in, please try again." +msgstr "Er is iets onverwachts gebeurd bij het inloggen. Probeer het opnieuw." + +msgid "User canceled." +msgstr "Gebruiker geannuleerd." + +msgid "Head diameter" +msgstr "Kopdiameter" + +msgid "Max angle" msgstr "" -msgid "User cancelled." +msgid "Detection radius" +msgstr "" + +msgid "Remove selected points" +msgstr "Verwijder geselecteerde punten" + +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "Genereer automatisch punten" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " ongeldige rand oren" + +msgid "Brim Ears" +msgstr "Rand Oren" + +msgid "Please select single object." +msgstr "Selecteer een enkel object." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15771,6 +19199,9 @@ msgid "" "Did you know that turning on precise wall can improve precision and layer " "consistency?" msgstr "" +"Precieze muur\n" +"Wist u dat het inschakelen van de precieze muur de precisie en consistentie " +"van de laag kan verbeteren?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" @@ -15779,12 +19210,18 @@ msgid "" "precision and layer consistency if your model doesn't have very steep " "overhangs?" msgstr "" +"Sandwichmodus\n" +"Wist u dat u de sandwichmodus (binnen-buiten-binnen) kunt gebruiken om de " +"precisie en consistentie van de laag te verbeteren als uw model geen erg " +"steile overhangen heeft?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" +"Kamertemperatuur\n" +"Wist je dat Snapmaker Orca kamertemperatuur ondersteunt?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -15792,24 +19229,34 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" +"Kalibratie\n" +"Wist u dat het kalibreren van uw printer wonderen kan doen? Bekijk onze " +"geliefde kalibratieoplossing in Snapmaker Orca." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" +"Hulpventilator\n" +"Wist u dat Snapmaker Orca eventuele extra onderdeel koelventilator ondersteunt?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" +"Luchtfiltratie/Afzuigventilator\n" +"Wist u dat Snapmaker Orca eventuele luchtfiltratie/afzuigventilator ondersteunt?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" +"G-codevenster\n" +"U kunt het G-codevenster in- of uitschakelen door op de C-toets te " +"drukken." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -15817,13 +19264,19 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" +"Werkruimten wisselen\n" +"U kunt schakelen tussen de werkruimten Voorbereiden en " +"Voorvertoning door op de Tab-toets te drukken." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" +"Hoe sneltoetsen te gebruiken\n" +"Wist u dat Snapmaker Orca een breed scala aan sneltoetsen en 3D-" +"scènebewerkingen biedt?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -15831,6 +19284,9 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" +"Achteruit op oneven\n" +"Wist u dat de functie Achteruit op oneven de oppervlaktekwaliteit van " +"uw overhangen aanzienlijk kan verbeteren?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -15863,7 +19319,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatisch rangschikken\n" "Wist je dat je alle objecten in je project automatisch kunt rangschikken?" @@ -15872,7 +19328,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Automatische oriëntatie\n" "Wist je dat je met een simpele klik objecten kunt roteren naar een optimale " @@ -15906,6 +19362,9 @@ msgid "" "Did you know that you use the Search tool to quickly find a specific Orca " "Slicer setting?" msgstr "" +"Zoekfunctionaliteit\n" +"Wist u dat u de zoekfunctie gebruikt om snel een specifieke Snapmaker Orca-" +"instelling te vinden?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -15913,6 +19372,10 @@ msgid "" "Did you know that you can reduce the number of triangles in a mesh using the " "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" +"Model vereenvoudigen\n" +"Wist u dat u het aantal driehoeken in een mesh kunt verminderen met de mesh " +"functie Vereenvoudigen? Klik met de rechtermuisknop op het model en " +"selecteer Model vereenvoudigen." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" @@ -15941,6 +19404,10 @@ msgid "" "part modifier? That way you can, for example, create easily resizable holes " "directly in Snapmaker Orca." msgstr "" +"Een deel aftrekken\n" +"Wist u dat u een mesh van een andere kunt aftrekken met de Negatief deel " +"aanpasser? Zo kunt u bijvoorbeeld gemakkelijk aanpasbare gaten rechtstreeks " +"in Snapmaker Orca maken." #: resources/data/hints.ini: [hint:STEP] msgid "" @@ -15950,6 +19417,11 @@ msgid "" "Snapmaker Orca supports slicing STEP files, providing smoother results than a " "lower resolution STL. Give it a try!" msgstr "" +"STEP\n" +"Wist u dat u uw afdrukkwaliteit kunt verbeteren door een STEP-bestand te " +"slicen in plaats van een STL?\n" +"Snapmaker Orca ondersteunt het slicen van STEP-bestanden, wat vloeiendere " +"resultaten oplevert dan een STL met een lagere resolutie. Probeer het eens!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -16037,7 +19509,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Brim voor betere hechting\n" @@ -16048,7 +19520,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Parameters instellen voor meerdere objecten\n" "Wist u dat u slicing parameters kunt instellen voor alle geselecteerde " @@ -16065,8 +19537,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Flush in support/voorwerpen/infill\n" "Wist u dat u minder filament verspilt door het tijdens het verwisselen van " @@ -16082,13 +19554,13 @@ msgstr "" "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt " "gebruiken om de sterkte van het model te verbeteren?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Wanneer moet u printen met de printerdeur open?\n" "Wist je dat het openen van de printerdeur de kans op verstopping van de " @@ -16101,22 +19573,1006 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Kromtrekken voorkomen\n" "Wist je dat bij het printen van materialen die gevoelig zijn voor " "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het " "warmtebed de kans op kromtrekken kan verkleinen?" +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptieve laaghoogte" + +#~ msgid "AMS not connected" +#~ msgstr "AMS niet aangesloten" + +#~ msgid "Ext Spool" +#~ msgstr "Ext Spool" + +#~ msgid "Guide" +#~ msgstr "Handleiding" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS kalibreren..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Er is een probleem opgetreden tijdens de kalibratie. Klik om de oplossing " +#~ "te bekijken." + +#~ msgid "Calibrate again" +#~ msgstr "Opnieuw kalibreren" + +#~ msgid "Cancel calibration" +#~ msgstr "Kalibreren afbreken" + +#~ msgid "Feed Filament" +#~ msgstr "Voer filament in" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "" +#~ "Er moet een MicroSD-kaart worden geplaatst voordat er via LAN kan worden " +#~ "afgedrukt." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "" +#~ "Een MicroSD-kaart moet worden geplaatst voordat er iets naar de printer " +#~ "wordt gestuurd." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Opmerking: Alleen de AMS-slots die met hetzelfde materiaaltype zijn " +#~ "geladen, kunnen worden geselecteerd." + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "De AMS zal een schatting maken van de resterende capaciteit van het Bambu-" +#~ "filament nadat de filamentinformatie is bijgewerkt. Tijdens het afdrukken " +#~ "wordt de resterende capaciteit automatisch bijgewerkt." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "De aanbevolen minimumtemperatuur is lager dan 190°C of de aanbevolen " +#~ "maximumtemperatuur is hoger dan 300°C.\n" + +#~ msgid "Paused due to filament runout" +#~ msgstr "De printtaak is gepauzeerd omdat het filament op is" + +#~ msgid "Heating hotend" +#~ msgstr "Hotend opwarmen" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Extrusie wordt gecalibreerd" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Printen is onderbroken door de gebruiker" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pauze cover printkop los" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "De extrusieflow kalibreren" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Onderbroken vanwege storing in de temperatuur van het mondstuk" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Onderbroken vanwege storing in de temperatuur van het printbed" + +#~ msgid "Skip step pause" +#~ msgstr "Stappauze overslaan" + +#~ msgid "Motor noise calibration" +#~ msgstr "Kalibratie van motorgeluid" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Gepauzeerd wegens verlies van AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Gepauzeerd vanwege lage snelheid van de ventilator voor warmteonderbreking" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Gepauzeerd vanwege een fout in de temperatuurregeling van de kamer" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Gepauzeerd door de G-code ingevoegd door gebruiker" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Mondstuk filament bedekt gedetecteerde pauze" + +#~ msgid "Cutter error pause" +#~ msgstr "Pauze bij snijfout" + +#~ msgid "First layer error pause" +#~ msgstr "Eerste laag foutpauze" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pauze bij verstopping van het mondstuk" + +#~ msgid "Fatal" +#~ msgstr "Fatale" + +#~ msgid "Serious" +#~ msgstr "Serieuze" + +#~ msgid "Common" +#~ msgstr "Standaard" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF wordt niet ondersteund door AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Een object is over de grens van de plaat geplaatst of overschrijdt de " +#~ "hoogtelimiet.\n" +#~ "Los het probleem op door het geheel op of van de plaat te verplaatsen, en " +#~ "controleer of de hoogte binnen het bouwvolume valt." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "U vindt deze in \"Instellingen > Netwerk > Verbindingscode\"\n" +#~ "op de printer, zoals aangegeven in de afbeelding:" + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Controleer of de Micro SD-kaart in de printer is geplaatst.\n" +#~ "Als de kaart nog steeds niet kan worden gelezen, kunt u proberen de kaart " +#~ "te formatteren." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Opslagruimte niet beschikbaar, Micro SD-kaart plaatsen." + +#~ msgid "Cham" +#~ msgstr "Kamer" + +#~ msgid "Still unload" +#~ msgstr "Nog steeds aan het ontladen" + +#~ msgid "Still load" +#~ msgstr "Laad nog steeds" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Kan niet starten zonder microSD-kaart." + +#~ msgid "Update" +#~ msgstr "Updaten" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "De gevoeligheid van het pauzeren is" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Geen AMS filamenten. Selecteer een printer in 'Apparaat' pagina om AMS " +#~ "info te laden." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Door filamenten te synchroniseren met de AMS zullen alle huidige " +#~ "geselecteerde filament presets en kleuren wegvallen. Wilt u doorgaan?" + +#~ msgid "Sync" +#~ msgstr "Sync" + +#~ msgid "Resync" +#~ msgstr "Resync" + +#~ msgid "General Settings" +#~ msgstr "Algemene instellingen" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Toon de melding 'Tip van de dag' na het starten" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "" +#~ "Indien ingeschakeld, worden bij het opstarten nuttige tips weergegeven." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Spoelvolumes: Automatisch berekenen telkens wanneer de kleur verandert." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Als deze optie is ingeschakeld, wordt elke keer dat de kleur verandert " +#~ "automatisch berekend." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Spoelvolumes: Automatisch berekenen telkens wanneer het filament wordt " +#~ "vervangen." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Als dit is ingeschakeld, wordt er automatisch berekend telkens wanneer " +#~ "het filament wordt verwisseld" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "" +#~ "Automatische rangschikking van de plaat na het klonen van een object" + +#~ msgid "Network" +#~ msgstr "Netwerk" + +#~ msgid "User Sync" +#~ msgstr "Gebruiker synchroniseren" + +#~ msgid "System Sync" +#~ msgstr "Systeemsync" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Koppel URL's aan Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "elke" + +#~ msgid "Dark Mode" +#~ msgstr "Donkere modus" + +#~ msgid "Home page and daily tips" +#~ msgstr "Startpagina en dagelijkse tips" + +#~ msgid "Show home page on startup" +#~ msgstr "Toon startpagina bij opstanden" + +#~ msgid "Send print job to" +#~ msgstr "Stuur de printtaak naar" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s overschrijdt het aantal AMS-sleuven. Update de firmware van " +#~ "de printer om de toewijzing van AMS-sleuven te ondersteunen." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Het filament overschrijdt het aantal AMS-sleuven. Update de firmware van " +#~ "de printer om de toewijzing van AMS-sleuven te ondersteunen." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "De toewijzingen van filamenten aan AMS-slots zijn vastgesteld. U kunt op " +#~ "een filament hierboven klikken om de toewijzing van het AMS slot te " +#~ "wijzigen" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Klik op elk filament hierboven om de bijbehorende AMS-sleuf op te geven " +#~ "voordat u de printopdracht verzendt" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "De firmware van de printer ondersteunt alleen sequentiële toewijzing van " +#~ "filament => AMS-sleuf." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "" +#~ "Er moet een MicroSD-kaart worden geplaatst voordat u kunt afdrukken." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "" +#~ "Er moet een MicroSD-kaart worden geplaatst om een timelapse op te nemen." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "mondstuk onthouden: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "De dieameter van het mondstuk in het bestand komt niet overeen met het " +#~ "opgeslagen mondstuk. Als u uw mondstuk onlangs hebt gewijzigd, ga dan " +#~ "naar Apparaat > Printeronderdelen om de instellingen te wijzigen." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Het printen van materiaal met een hoge temperatuur (%s materiaal) met %s " +#~ "kan schade aan het mondstuk veroorzaken" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Aansluiten op de printer. Kan niet annuleren tijdens het " +#~ "verbindingsproces." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Let op bij gebruik! Flowkalibratie op de PEI-plaat met structuur kan " +#~ "mislukken vanwege het verstrooide oppervlak." + +#~ msgid "Send to Printer SD card" +#~ msgstr "Verzenden naar de MicroSD-kaart in de printer" + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "" +#~ "De printer biedt geen ondersteuning voor het verzenden naar de microSD-" +#~ "kaart van de printer." + +#~ msgid "Auto-Calc" +#~ msgstr "Automatisch berekenen" + +#~ msgid "unloaded" +#~ msgstr "uitgeladen" + +#~ msgid "loaded" +#~ msgstr "Geladen" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Van" + +#~ msgid "To" +#~ msgstr "Naar" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ "staat te dicht bij anderen; er kunnen botsingen optreden tijdens het " +#~ "afdrukken." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Het is niet mogelijk om met meerdere filamenten te printen die een groot " +#~ "temperatuurverschil hebben. Anders kunnen de extruder en het mondstuk " +#~ "tijdens het afdrukken worden geblokkeerd of beschadigd" + +#~ msgid "Remove small overhangs" +#~ msgstr "Kleine uitsteeksels verwijderen" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Verwijder kleine overstekken die mogelijk geen steun nodig hebben." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Slechts één van de resultaten met dezelfde naam wordt opgeslagen. Weet je " +#~ "zeker dat je de andere resultaten wilt overschrijven?" + +#~ msgid "External Spool" +#~ msgstr "Externe spoel" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "The custom printer or model missing; please input." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "mondstuk in voorinstelling: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Uw mondstuk diameter in preset komt niet overeen met de opgeslagen " +#~ "mondstuk diameter. Heeft u uw mondstuk veranderd?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "" +#~ "*Het afdrukken van %s materiaal met %s kan schade aan het mondstuk " +#~ "veroorzaken" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + muiswiel" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + muiswiel" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + linker muisknop" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Muis op of neer" + +#~ msgid "Left mouse button:" +#~ msgstr "Linker muisknop" + +#~ msgid "Right mouse button:" +#~ msgstr "Rechter muisknop:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + linker muisknop:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + rechter muisknop:" + +#~ msgid "Recent projects" +#~ msgstr "Recente Projecten" + +#~ msgid "Maximum recent projects" +#~ msgstr "Maximale recente projecten" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Maximaal aantal recente projecten" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+willekeurige pijl" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Linker muisknop" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Linker muisknop" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "CTRL+willekeurige pijl" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Linker muisknop" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Linker muisknop" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Linker muisknop" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+willekeurige pijl" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+muiswiel" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Muiswiel" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "CTRL+muiswiel" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+muiswiel" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+Muiswiel" + +#~ msgid "Set Position" +#~ msgstr "Positie instellen" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "" +#~ "Klik met de rechter muisknop op het pictogram om het modelobject te " +#~ "repareren" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "Het doelbestand bevat slechts 1 onderdeel en kan daarom niet worden " +#~ "opgesplitst." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Kleurschema" + +#~ msgid "Percent" +#~ msgstr "Procent" + +#~ msgid "Used filament" +#~ msgstr "Verbruikt filament" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Meer..." + +#~ msgid "More calibrations" +#~ msgstr "Meer kalibraties" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "MicroSD-kaart" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Geen microSD-kaart" + +#~ msgid "SD Card Abnormal" +#~ msgstr "MicroSD Kaart Abnormaal" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Het uitwerpen van apparaat %s(%s) is mislukt." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "Ongeldig nummer" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "mondstuk onthouden: %.2f %s" + +#~ msgid "Ramming settings" +#~ msgstr "Ramming-instellingen" + +#~ msgid "Profile dependencies" +#~ msgstr "Profielafhankelijkheden" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "Het configuratie bestand is niet compatibel met de huidige versie van " +#~ "Bambu Studio." + +#~ msgid "Total ramming time" +#~ msgstr "Totale ramming-tijd" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Totaal ramming-volume" + +#~ msgid "Ramming line width" +#~ msgstr "Lijnbreedte voor ramming" + +#~ msgid "Ramming line spacing" +#~ msgstr "Lijnafstand voor ramming" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Compatible machine" +#~ msgstr "Geschikte machine" + +#~ msgid "Compatible machine condition" +#~ msgstr "Conditie van geschikte machine" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Conditie van -geschikte proces profielen" + +#~ msgid "Default filament color" +#~ msgstr "Standaard filamentkleur" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "De hoogste printbare laaghoogte voor de extruder: dit wordt gebruikt om " +#~ "de maximale laaghoogte te beperken wanneer adaptieve laaghoogte is " +#~ "ingeschakeld." + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "De laagste printbare laaghoogte voor de extruder: dit wordt gebruikt om " +#~ "de minimale laaghoogte te beperken wanneer adaptieve laaghoogte is " +#~ "ingeschakeld." + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Een deel van het materiaal in de extruder wordt teruggetrokken om " +#~ "sijpelen tijdens verplaatsingen over lange afstand te voorkomen. Stel in " +#~ "op 0 om terugtrekken (retraction) uit te schakelen." + +#~ msgid "Speed of retractions." +#~ msgstr "Dit is de snelheid voor terugtrekken (retraction)" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "De snelheid voor het herladen van filament in de extruder na een " +#~ "terugtrekking (retraction); als u dit op 0 zet, betekent dit dat het " +#~ "dezelfde snelheid heeft als het intrekken (retraction)." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Dit is de afstand tussen de interfacelijnen. 0 betekent solide interface." + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Minimale dikte van dunne onderdelen. Modelkenmerken die dunner zijn dan " +#~ "deze waarde worden niet afgedrukt, terwijl functies die dikker zijn dan " +#~ "de minimale afmeting van het object, worden verbreed tot de minimale " +#~ "wandbreedte. Dit wordt uitgedrukt als een percentage ten opzichte van de " +#~ "diameter van het mondstuk" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "laad actuele proces-/machine-instellingen bij gebruik van up-to-date" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "We hebben nu de automatische kalibratie voor verschillende filamenten " +#~ "toegevoegd. Deze is volledig geautomatiseerd en het resultaat wordt " +#~ "opgeslagen in de printer voor toekomstig gebruik. Je hoeft de kalibratie " +#~ "alleen uit te voeren in de volgende beperkte gevallen:\n" +#~ "1. Als je een nieuw filament van een ander merk/model introduceert of als " +#~ "het filament vochtig is;\n" +#~ "2. Als het mondstuk versleten is of vervangen is door een nieuwe;\n" +#~ "3. Als de maximale volumetrische snelheid of printtemperatuur is " +#~ "gewijzigd in de filamentinstelling." + +#~ msgid "step: " +#~ msgstr "stap:" + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "STL laden" + +#~ msgid "Load svg" +#~ msgstr "svg laden" + +#~ msgid "Back Page 1" +#~ msgstr "Terug Pagina 1" + +#~ msgid "Delete Filament" +#~ msgstr "Draad verwijderen" + +#~ msgid "Refresh Printers" +#~ msgstr "Printers vernieuwen" + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "De laagdikte is erg groot, wat resulteert in duidelijke lijnen, een lage " +#~ "afdrukkwaliteit en een kortere afdruktijd." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "Vergeleken met het standaardprofiel van een 0,8 mm mondstuk, heeft het " +#~ "een kleinere laaghoogte. Dit resulteert in minder maar nog steeds " +#~ "zichtbare laaglijnen en een iets hogere printkwaliteit, maar in sommige " +#~ "gevallen een langere printtijd." + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "We hebben een experimentele stijl toegevoegd, „Tree Slim”, met een " +#~ "kleiner ondersteuningsvolume maar een zwakkere sterkte.\n" +#~ "We raden aan om het te gebruiken met: 0 interfacelagen, 0 bovenafstand, 2 " +#~ "muren." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Voor de stijlen „Tree Strong” en „Tree Hybrid” raden we de volgende " +#~ "instellingen aan: ten minste 2 interfacelagen, ten minste 0,1 mm op z " +#~ "afstand of gebruik support materiaal op de interface." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "Deze instelling specificeert het aantal muren rond de ondersteuning" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Support: toolpad genereren op laag %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Support: detecteren van overhangende wanden" + +#~ msgid "Support: propagate branches" +#~ msgstr "Support: vertakkingen verspreiden" + +#~ msgid "Support: draw polygons" +#~ msgstr "Support: polygonen tekenen" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Support: toolpath genereren" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Support: genereer polygonen op laag %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Support: repareer gaten op laag %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Support: verspreid takken op laag %d" + +#~ msgid "Stopped." +#~ msgstr "Gestopt." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Verbinding mislukt [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Initialization failed (Device connection not ready)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Initialisatie is mislukt (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN-verbinding mislukt (verzenden afdrukbestand)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Stap 1, bevestig dat Snapmaker Orca en uw printer zich in hetzelfde LAN " +#~ "bevinden." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Stap 2, als het IP-adres en de toegangscode hieronder afwijken van de " +#~ "werkelijke waarden op uw printer, corrigeer ze dan." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Stap 3: Ping het IP-adres om te controleren op pakketverlies en latentie." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Forceer koeling voor overhangende delen en bruggen (bridge)" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Schakel deze optie in om de snelheid van de koelventilator van de " +#~ "printkop te optimaliseren voor overhang en bruggen" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Ventilator snelheid voor overhangende delen" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Forceer de koelventilator van de printkop om deze snelheid te hebben bij " +#~ "het afdrukken van een brug of overhangende muur met een grote " +#~ "overhanggraad. Het forceren van koeling voor overhang en brug kan een " +#~ "resulteren in een betere kwaliteit voor dit onderdeel" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Drempel voor overhang koeling" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Dwingt de koelventilator tot een bepaalde snelheid wanneer de " +#~ "overhanggraad van het geprinte deel deze waarde overschrijdt. Dit wordt " +#~ "uitgedrukt als een percentage dat aangeeft hoe breed de lijn is zonder " +#~ "steun van de onderste laag. 0%% betekent koeling afdwingen voor de hele " +#~ "buitenwand, ongeacht de overhanggraad." + +#~ msgid "Bridge infill direction" +#~ msgstr "Bruginvulling richting" + +#~ msgid "Bridge density" +#~ msgstr "Brugdichtheid" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Dichtheid van externe bruggen. 100% betekent massieve brug. Standaard is " +#~ "100%." + +#~ msgid "Thick bridges" +#~ msgstr "Dikke bruggen" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Schalen" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-hop tijdens terugtrekken (retraction)" + +#~ msgid "Reverse on odd" +#~ msgstr "Overhang omkering" + +#~ msgid "Limited" +#~ msgstr "Gelimiteerd" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Pas deze waarde aan om te voorkomen dat korte, niet-gesloten wanden " +#~ "worden geprint, wat de printtijd kan verlengen. Hogere waarden " +#~ "verwijderen meer en langere wanden.\n" +#~ "\n" +#~ "OPMERKING: Onder- en bovenoppervlakken worden niet beïnvloed door deze " +#~ "waarde om visuele gaten aan de buitenkant van het model te voorkomen. Pas " +#~ "'One wall threshold' aan in de geavanceerde instellingen hieronder om de " +#~ "gevoeligheid van wat als een bovenoppervlak wordt beschouwd aan te " +#~ "passen. 'One wall threshold' is alleen zichtbaar als deze instelling " +#~ "boven de standaardwaarde van 0,5 is ingesteld of als enkelwandige " +#~ "bovenoppervlakken zijn ingeschakeld." + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Verlaag deze waarde iets (bijvoorbeeld 0,9) om de hoeveelheid materiaal " +#~ "voor bruggen te verminderen, dit om doorzakken te voorkomen." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Deze factor beïnvloedt de hoeveelheid materiaal voor de bovenste vaste " +#~ "vulling. Je kunt het iets verminderen om een glad oppervlak te krijgen." + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Dit is de snelheid voor bruggen en 100% overhangende wanden." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tijd welke nodig is om nieuw filament te laden tijdens het wisselen. " +#~ "Enkel voor statistieken." + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tijd welke nodig is om oud filament te lossen tijdens het wisselen. Enkel " +#~ "voor statistieken." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tijd voor de printerfirmware (of de MMU 2.0) om nieuw filament te laden " +#~ "tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd " +#~ "wordt toegevoegd aan de totale printtijd in de tijdsschatting." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tijd voor de printerfirmware (of de MMU 2.0) om filament te ontladen " +#~ "tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd " +#~ "wordt toegevoegd aan de totale printtijd in de tijdsschatting." + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Verschillende mondstukdiameters en verschillende filamentdiameters zijn " +#~ "niet toegestaan als de prime-toren is ingeschakeld." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "Ooze-preventie wordt momenteel niet ondersteund als de prime tower is " +#~ "ingeschakeld." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Insluitdiepte van een gesegmenteerd gebied. Nul schakelt deze functie uit." + #~ msgid "Please input a valid value (K in 0~0.3)" #~ msgstr "Voer een geldige waarde in (K in 0~0.3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Voer een geldige waarde in (K in 0~0,3, N in 0,6~2,0)" -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "Printer local connection failed; please try again." - #~ msgid "" #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" #~ "\n" @@ -16178,12 +20634,6 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Zoek de hoek met de perfecte extrusiegraad" -#~ msgid "V" -#~ msgstr "V" - -#~ msgid "Export &Configs" -#~ msgstr "Export &Configs" - #~ msgid "Infill direction" #~ msgstr "Vulling (infill) richting" @@ -16205,34 +20655,15 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Lossen" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Kies een AMS sleuf en druk op de \"Laden\" of \"Verwijderen\" knop om het " -#~ "filament automatisch te laden of te verwijderen." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Moederbord" #~ msgid "TH" #~ msgstr "th" -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - #~ msgid "active" #~ msgstr "Actief" -#~ msgid "Jump to layer" -#~ msgstr "Jump to layer" - #~ msgid "Cabin humidity" #~ msgstr "Vochtigheid in de cabine" @@ -16267,7 +20698,7 @@ msgstr "" #~ "tijd geeft de indicator de vochtigheid mogelijk niet nauwkeurig weer." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Opmerking: als er tijdens het afdrukken nieuw filament wordt geplaatst, " @@ -16284,8 +20715,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Initialisatie is mislukt (geen camera-apparaat)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "De printer is bezig met downloaden. Wacht tot het downloaden is voltooid." @@ -16303,23 +20733,9 @@ msgstr "" #~ msgid "Load failed [%d]!" #~ msgstr "Laden mislukt [%d]!" -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "No files [%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "Load failed [%d]" - -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "Failed to fetch model infomation from printer." - -#~ msgid "Failed to parse model infomations." -#~ msgstr "Failed to parse model infomation" - #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16328,11 +20744,11 @@ msgstr "" #~ "wisselen van preset?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Je hebt een aantal vooraf ingestelde instellingen gewijzigd. \n" +#~ "Je hebt een aantal vooraf ingestelde instellingen gewijzigd.\n" #~ "Wilt u deze gewijzigde instellingen (nieuwe waarde) behouden na het " #~ "wisselen van presets?" @@ -16346,7 +20762,7 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Het configuratiebestand is bijgewerkt naar " -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "De configuratie kan niet worden geladen." #~ msgid "Movement:" @@ -16378,10 +20794,10 @@ msgstr "" #~ msgstr "Connectors must be on object surface." #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Foutieve staat. \n" +#~ "Foutieve staat.\n" #~ "Geen onderdelen geselecteerd om te behouden na knippen" #~ msgid "Edit Text" @@ -16393,30 +20809,6 @@ msgstr "" #~ msgid "Exception" #~ msgstr "Uitzondering" -#~ msgid "Choose SLA archive:" -#~ msgstr "Choose SLA archive:" - -#~ msgid "Import file" -#~ msgstr "Import file" - -#~ msgid "Import model and profile" -#~ msgstr "Import model and profile" - -#~ msgid "Import profile only" -#~ msgstr "Import profile only" - -#~ msgid "Import model only" -#~ msgstr "Import model only" - -#~ msgid "Accurate" -#~ msgstr "Accurate" - -#~ msgid "Balanced" -#~ msgstr "Balanced" - -#~ msgid "Quick" -#~ msgstr "Quick" - #~ msgid "" #~ "Discribe how long the nozzle will move along the last path when retracting" #~ msgstr "" @@ -16434,9 +20826,6 @@ msgstr "" #~ "functie Simplify mesh? Klik met de rechtermuisknop op het model en " #~ "selecteer Model vereenvoudigen. Lees meer in de documentatie." -#~ msgid "Filling bed " -#~ msgstr "Filling bed" - #, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." #~ msgstr "%1% het gekozen vulling patroon ondersteund geen 100%% dichtheid." @@ -16451,10 +20840,6 @@ msgstr "" #~ "Nee - Zet de dichtheid automatisch terug naar de standaard niet 100% " #~ "waarde" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "" -#~ "Verwarm de nozzle tot meer dan 170 graden voordat je het filament laadt." - #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" #~ msgstr "" @@ -16468,22 +20853,12 @@ msgstr "" #~ msgstr "" #~ "Deze instelling specificeert het aantal wanden rond de tree support." -#, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " doesn't work at 100%% density " - -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Hulpmiddel op zijde plaatsen" #~ msgid "Export as STL" #~ msgstr "Exporteer als STL-bestand" -#~ msgid "Check cloud service status" -#~ msgstr "Check cloud service status" - #~ msgid "Please input a valid value (K in 0~0.5)" #~ msgstr "Voer een geldige waarde in (K in 0 ~ 0,5)" @@ -16493,21 +20868,17 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Exporteer alle objecten als STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "" -#~ "Het 3mf bestand is niet compatibel, enkel de geometrische data wordt " +#~ "Het 3MF bestand is niet compatibel, enkel de geometrische data wordt " #~ "geladen!" #~ msgid "Incompatible 3mf" -#~ msgstr "Onbruikbaar 3mf bestand" +#~ msgstr "Onbruikbaar 3MF bestand" #~ msgid "Add/Remove printers" #~ msgstr "Printers toevoegen/verwijderen" -#, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s is not supported by the AMS." - #~ msgid "Don't remind me of this version again" #~ msgstr "Herinner me niet meer aan deze versie." @@ -16537,125 +20908,6 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "binnen-buiten-binnen/infill" -#~ msgid "Export 3MF" -#~ msgstr "Exporteer 3mf" - -#~ msgid "Export project as 3MF." -#~ msgstr "Dit exporteert het project als 3MF." - -#~ msgid "Export slicing data" -#~ msgstr "Exporteer slicinggegevens" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Exporteer slicinggegevens naar een map" - -#~ msgid "Load slicing data" -#~ msgstr "Laad slicinggegevens" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Laad slicinggegevens in de cache uit de directory" - -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "" -#~ "Slice de printbedden: 0-alle printbedden, i-printbed i, andere-onjuist" - -#~ msgid "Show command help." -#~ msgstr "Dit toont de command hulp." - -#~ msgid "UpToDate" -#~ msgstr "UpToDate" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Update de configuratiewaarden van 3mf naar de nieuwste versie." - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max triangle count per plate for slicing" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "max slicing time per plate in seconds" - -#~ msgid "Normative check" -#~ msgstr "Normative check" - -#~ msgid "Check the normative items." -#~ msgstr "Check the normative items." - -#~ msgid "Output Model Info" -#~ msgstr "Model informatie weergeven" - -#~ msgid "Output the model's information." -#~ msgstr "Dit geeft de informatie van het model weer." - -#~ msgid "Export Settings" -#~ msgstr "Exporteer instellingen" - -#~ msgid "Export settings to a file." -#~ msgstr "Exporteer instellingen naar een bestand" - -#~ msgid "Send progress to pipe" -#~ msgstr "Stuur voortgang naar pipe" - -#~ msgid "Send progress to pipe." -#~ msgstr "Stuur voortgang naar pipe" - -#~ msgid "Arrange Options" -#~ msgstr "Rangschik opties" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Rangschik opties: 0-uitzetten, 1-aanzetten, anders-automatisch" - -#~ msgid "Convert Unit" -#~ msgstr "Eenheid converteren" - -#~ msgid "Convert the units of model" -#~ msgstr "Converteer de eenheden van het model" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Schaal het model met een float-factor" - -#~ msgid "Load General Settings" -#~ msgstr "Standaard instellingen laden" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Proces/machine instellingen laden vanuit een gekozen bestand" - -#~ msgid "Load Filament Settings" -#~ msgstr "Filament instellingen laden" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Filament instellingen laden vanuit een bestandslijst" - -#~ msgid "Skip Objects" -#~ msgstr "Skip Objects" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Skip some objects in this print" - -#~ msgid "Output directory" -#~ msgstr "Uitvoermap" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Dit is de map waarin de geëxporteerde bestanden worden opgeslagen" - -#~ msgid "Debug level" -#~ msgstr "Debuggen level" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" -#~ "debug, 5:trace\n" - #~ msgid "" #~ "3D Scene Operations\n" #~ "Did you know how to control view and object/part selection with mouse and " @@ -16665,31 +20917,12 @@ msgstr "" #~ "Weet u hoe u de weergave en selectie van objecten/onderdelen met de muis " #~ "en het aanraakscherm in de 3D-scène kunt bedienen?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Model repareren\n" -#~ "Wist u dat u een beschadigd 3D-model kunt repareren om veel snijproblemen " -#~ "te voorkomen?" - -# Source and destination string both English but don't match! -#~ msgid "Embeded" -#~ msgstr "Embedded" - #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "Snapmaker Orca configuratiebestand is mogelijks corrupt, en kan niet verwerkt " -#~ "worden.Verwijder het configuratiebestand en probeer het opnieuw." - -#~ msgid "Online Models" -#~ msgstr "Online Models" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "Show online staff-picked models on the home page" +#~ "worden. Verwijder het configuratiebestand en probeer het opnieuw." #~ msgid "The minimum printing speed when slow down for cooling" #~ msgstr "De minimale printsnelheid indien er afgeremd wordt om af te koelen" @@ -16734,22 +20967,16 @@ msgstr "" #~ msgid "The model has too many empty layers." #~ msgstr "Het model heeft te veel lege lagen." -#~ msgid "Cali" -#~ msgstr "Cali" - #~ msgid "Calibration of extrusion" #~ msgstr "Kalibratie van de extrusie" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Push new filament into the extruder" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" -#~ "De printbed temperatuur voor de overige lagen is %d graden celcius lager " +#~ "De printbed temperatuur voor de overige lagen is %d graden Celcius lager " #~ "dan de temperatuur voor de eerste laag.\n" #~ "Hierdoor kan de print loskomen van het printbed gedurende de printtaak" @@ -16766,21 +20993,9 @@ msgstr "" #~ "Houd de printer open tijdens het printproces om te zorgen voor " #~ "luchtcirculatie, of om de temperatuur van het warmwaterbed te verlagen." -#~ msgid "Total Time Estimation" -#~ msgstr "Total Time Estimation" - #~ msgid "Resonance frequency identification" #~ msgstr "Identificatie van de resonantiefrequentie" -#~ msgid "Immediately score" -#~ msgstr "Immediately score" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "Please give a score for your favorite Bambu Market model." - -#~ msgid "Score" -#~ msgstr "Score" - #~ msgid "Bambu High Temperature Plate" #~ msgstr "Bambu High Temperature (hoge temperatuur) Plate" @@ -16794,8 +21009,8 @@ msgstr "" #~ msgstr "High Temp Plate (hoge temperatuur printbed)" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Dit is de bedtemperatuur wanneer de hogetemperatuurplaat is " #~ "geïnstalleerd. Een waarde van 0 betekent dat het filament printen op de " @@ -16834,4 +21049,4 @@ msgstr "" #~ "van de bouwplaat." #~ msgid "Orient the model" -#~ msgstr "Oriënteer het model" +#~ msgstr "Oriënteer het model" \ No newline at end of file diff --git a/localization/i18n/pl/Snapmaker_Orca_pl.po b/localization/i18n/pl/Snapmaker_Orca_pl.po index 213c80b0cc..96d381bed4 100644 --- a/localization/i18n/pl/Snapmaker_Orca_pl.po +++ b/localization/i18n/pl/Snapmaker_Orca_pl.po @@ -1,11 +1,11 @@ # msgid "" msgstr "" -"Project-Id-Version: Snapmaker Orca 2.1\n" +"Project-Id-Version: Snapmaker Orca 2.3.0-rc\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: \n" -"Last-Translator: Krzysztof Morga \n" +"Last-Translator: Krzysztof Morga <>\n" "Language-Team: \n" "Language: pl_PL\n" "MIME-Version: 1.0\n" @@ -13,22 +13,130 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 " "|| n%100>14) ? 1 : 2);\n" -"X-Generator: Poedit 3.5\n" +"First-Translator: Krzysztof Morga \n" +"X-Generator: Poedit 3.6\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU nie jest obsługiwane przez AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Wilgotne PVA staje się elastyczne i może utknąć wewnątrz AMS, proszę " +"pamiętać o wysuszeniu go przed użyciem." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Filamenty CF/GF są twarde i kruche, łatwo je złamać i zaklinować w AMS, " +"proszę używać ostrożnie." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Aktualna wilgotność AMS" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Temperatura" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Bezczynny" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Seria:" + +msgid "Version:" +msgstr "Wersja:" + +msgid "Latest version" +msgstr "Najnowsza wersja" + +msgid "Support Painting" msgstr "Malowanie podpór" -msgid "Alt + Mouse wheel" -msgstr "Alt + Kółko myszy" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Kółko myszy" msgid "Section view" msgstr "Widok przekroju" msgid "Reset direction" -msgstr "Resetuj kierunek" - -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Kółko myszy" +msgstr "Przywróć kierunek" msgid "Pen size" msgstr "Rozmiar pióra" @@ -45,9 +153,6 @@ msgstr "Prawy przycisk myszy" msgid "Block supports" msgstr "Zablokuj podpory" -msgid "Shift + Left mouse button" -msgstr "Shift + Lewy przycisk myszy" - msgid "Erase" msgstr "Wymaż" @@ -92,7 +197,7 @@ msgstr "Wypełnienie szczelin" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Pozwala malować tylko na wybranych powierzchniach za pomocą: \"%1%\"" +msgstr "Pozwala malować tylko na wybranych powierzchniach za pomocą: „%1%”" msgid "Highlight faces according to overhang angle." msgstr "Podświetl ściany zgodnie z kątem nawisu." @@ -111,7 +216,7 @@ msgstr "Połóż na powierzchni" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Liczba filamentów przekracza maksymalną ilość obsługiwaną przez narzędzie " @@ -153,12 +258,21 @@ msgstr "Wypełnienie kubełkowe" msgid "Height range" msgstr "Zakres wysokości" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "Przełącz rysunek techniczny" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Anuluj" + msgid "Shortcut Key " msgstr "Skrót klawiszowy " @@ -182,9 +296,33 @@ msgstr "Usuń pomalowany kolor" msgid "Painted using: Filament %1%" msgstr "Pomalowane za pomocą: Filament %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Rozmiar pędzla" + +msgid "Brush shape" +msgstr "Kształt pędzla" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Przesuń" +msgid "Please select at least one object." +msgstr "Proszę wybrać przynajmniej jeden obiekt." + msgid "Gizmo-Move" msgstr "Uchwyt-Przesuń" @@ -215,14 +353,20 @@ msgstr "cal" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Pozycja" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Obrót" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Współczynniki skali" @@ -239,9 +383,6 @@ msgstr "Konwersja" msgid "Group Operations" msgstr "Operacje grupowe" -msgid "Set Position" -msgstr "Ustaw pozycję" - msgid "Set Orientation" msgstr "Ustaw orientację" @@ -254,22 +395,31 @@ msgstr "Zresetuj pozycję" msgid "Reset Rotation" msgstr "Zresetuj obrót" -msgid "World coordinates" -msgstr "Współrzędne" - msgid "Object coordinates" msgstr "Koordynaty obiektu" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Współrzędne" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Rozmiar" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "równomierne skalowanie" @@ -319,7 +469,7 @@ msgid "Connectors" msgstr "Łączniki" msgid "Type" -msgstr "Typ" +msgstr "Rodzaj" msgid "Style" msgstr "Styl" @@ -333,6 +483,12 @@ msgstr "Kształt" msgid "Depth" msgstr "Głębokość" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Obrót" + msgid "Groove" msgstr "Rowek" @@ -346,7 +502,7 @@ msgid "Groove Angle" msgstr "Kąt rowka" msgid "Part" -msgstr "Wydruk" +msgstr "Część" msgid "Object" msgstr "Obiekt" @@ -411,7 +567,7 @@ msgid "Select all connectors" msgstr "Zaznacz wszystkie łączniki" msgid "Cut" -msgstr "Przeciąć" +msgstr "Wytnij" msgid "Rotate cut plane" msgstr "Obróć przekrój" @@ -434,9 +590,6 @@ msgstr "Proporcja przestrzeni do promienia" msgid "Confirm connectors" msgstr "Potwierdź łączniki" -msgid "Cancel" -msgstr "Anuluj" - msgid "Build Volume" msgstr "Wymiary robocze" @@ -558,7 +711,7 @@ msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to simplify the model." msgstr "" -"Przetwarzanie modelu '%1%' z więcej niż 1 mln trójkątów może być wolne. " +"Przetwarzanie modelu „%1%” z więcej niż 1 mln trójkątów może być wolne. " "Zaleca się zastosowanie uproszczenia modelu." msgid "Simplify model" @@ -596,14 +749,10 @@ msgstr "%d trójkątów" msgid "Show wireframe" msgstr "Pokaż siatkę" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Nie można zastosować w czasie podglądu procesu." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operacja jest już anulowana. Proszę poczekać kilka sekund." msgid "Face recognition" @@ -612,12 +761,6 @@ msgstr "Rozpoznawanie twarzy" msgid "Perform Recognition" msgstr "Wykonaj rozpoznawanie" -msgid "Brush size" -msgstr "Rozmiar pędzla" - -msgid "Brush shape" -msgstr "Kształt pędzla" - msgid "Enforce seam" msgstr "Wymuś szew" @@ -654,7 +797,7 @@ msgid "Angle" msgstr "Kąt" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Wbudowana\n" @@ -669,8 +812,8 @@ msgstr "Powierzchnia" msgid "Horizontal text" msgstr "Tekst poziomy" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Przesuń myszką w górę lub w dół" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Obróć tekst" @@ -739,8 +882,7 @@ msgid "Embossed text cannot contain only white spaces." msgstr "Pole do wprowadzania tekstu nie może być puste." msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "" -"Tekst zawiera znak znaków (reprezentowany przez '?') nieznany dla czcionki." +msgstr "Tekst zawiera glif znaku (reprezentowany przez „?”) nieznany czcionce." msgid "Text input doesn't show font skew." msgstr "Wprowadzanie tekstu nie pokazuje nachylenia czcionki." @@ -767,7 +909,7 @@ msgstr "Przywróć zmiany czcionki." #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "Nie można wybrać czcionki \"%1%\"." +msgstr "Nie można wybrać czcionki „%1%”." msgid "Operation" msgstr "Operacja" @@ -795,10 +937,10 @@ msgid "Click to change part type into modifier." msgstr "Kliknij, aby zmienic typ tekstu na modyfikator." msgid "Change Text Type" -msgstr "Zmień typ tekstu" +msgstr "Zmień rodzaj tekstu" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Zmien nazwe stylu (%1%) dla wytłaczanego tekstu" msgid "Name can't be empty." @@ -845,34 +987,34 @@ msgid "Save as new style." msgstr "Zapisz jako nowy styl." msgid "Remove style" -msgstr "Usun styl" +msgstr "Usuń styl" msgid "Can't remove the last existing style." msgstr "Nie mozna usunac ostatniego istniejącego stylu." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "Czy na pewno chcesz trwale usunac styl \"%1%\"?" +msgstr "Czy na pewno trwale usunąć styl „%1%”?" #, boost-format msgid "Delete \"%1%\" style." -msgstr "Usun styl \"%1%\"." +msgstr "Usuń styl „%1%”." #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "Nie mozna usunac \"%1%\". To ostatni styl." +msgstr "Nie można usunąć „%1%”. To ostatni styl." #, boost-format msgid "Can't delete temporary style \"%1%\"." -msgstr "Nie mozna usunac tymczasowego stylu \"%1%\"." +msgstr "Nie można usunąć tymczasowego stylu „%1%”." #, boost-format msgid "Modified style \"%1%\"" -msgstr "Zmodyfikowany styl \"%1%\"" +msgstr "Zmodyfikowany styl „%1%”" #, boost-format msgid "Current style is \"%1%\"" -msgstr "Biezacy styl to \"%1%\"" +msgstr "Bieżący styl to „%1%”" #, boost-format msgid "" @@ -880,16 +1022,16 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" -"Zmiana stylu na \"%1%\" spowoduje utratę bieżącej modyfikacji stylu.\n" +"Zmiana stylu na „%1%” spowoduje utratę bieżącej modyfikacji stylu.\n" "\n" -"Czy mimo to chcesz kontynuować?" +"Czy kontynuować mimo to?" msgid "Not valid style." msgstr "Nieprawidłowy styl." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "Styl \"%1%\" nie może być używany i zostanie usunięty z listy." +msgstr "Styl „%1%” nie może być używany i zostanie usunięty z listy." msgid "Unset italic" msgstr "Wylacz kursywe" @@ -992,7 +1134,7 @@ msgstr "Odległość środka tekstu od powierzchni modelu." msgid "Undo rotation" msgstr "Cofnij obrót" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Obróć tekst zgodnie z ruchem wskazówek zegara." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1012,14 +1154,17 @@ msgstr "Skieruj tekst w moją stronę" msgid "Orient the text towards the camera." msgstr "Orientuj tekst w moim kierunku." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "Czcionka „%1%” nie może być użyta. Wybierz inną." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" -"Nie można załadować dokładnie tej samej czcionki (\"%1%\"). Aplikacja " -"wybrała podobną (\"%2%\"). Musisz określić czcionkę, aby umożliwić edycję " -"tekstu." +"Nie można wczytać dokładnie tej samej czcionki („%1%”). Aplikacja wybrała " +"podobną („%2%”). Należy określić czcionkę, aby umożliwić edycję tekstu." msgid "No symbol" msgstr "Brak symbolu" @@ -1131,11 +1276,11 @@ msgstr "Otwórz wypełnioną ścieżkę" msgid "Undefined stroke type" msgstr "Nie zdefiniowano rodzaju obrysu" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "Ścieżki nie można uleczyć z samoprzecięć i wielu punktów." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "Ostateczny kształt zawiera samoprzecięcia lub wielokrotne punkty o tej samej " @@ -1145,7 +1290,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "Kształt jest oznaczony jako niewidoczny (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Wypełnienie kształtu (%1%) zawiera nieobsługiwane: %2%." @@ -1167,7 +1312,7 @@ msgstr "Nieznana nazwa pliku" #, boost-format msgid "SVG file path is \"%1%\"" -msgstr "Ścieżka do pliku SVG to \"%1%\"" +msgstr "Ścieżka do pliku SVG to „%1%”" msgid "Reload SVG file from disk." msgstr "Przeładuj plik SVG z dysku." @@ -1175,7 +1320,8 @@ msgstr "Przeładuj plik SVG z dysku." msgid "Change file" msgstr "Zmień plik" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Zmień na inny plik .svg" msgid "Forget the file path" @@ -1186,7 +1332,7 @@ msgid "" "Also disables 'reload from disk' option." msgstr "" "Nie zapisuj lokalnej ścieżki do pliku 3MF.\n" -"Uniemożliwia również opcję 'przeładuj z dysku'." +"Uniemożliwia również opcję \"przeładuj z dysku\"." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" @@ -1202,8 +1348,8 @@ msgstr "Zapisz jako" msgid "Save SVG file" msgstr "Zapisz plik SVG" -msgid "Save as '.svg' file" -msgstr "Zapisz jako plik '.svg'" +msgid "Save as SVG file." +msgstr "Zapisz jako plik \".svg\"" msgid "Size in emboss direction." msgstr "Rozmiar w kierunku wytłaczania." @@ -1270,6 +1416,9 @@ msgstr "Analizator Nano SVG nie może załadować z pliku (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "Plik SVG nie zawiera jednej ścieżki do wytłaczania (%1%)." +msgid "No feature" +msgstr "Brak funkcji" + msgid "Vertex" msgstr "Wierzchołek" @@ -1294,9 +1443,6 @@ msgstr "Środek krawędzi" msgid "Center of circle" msgstr "Środek okręgu" -msgid "ShiftLeft mouse button" -msgstr "Shift + Lewy przycisk myszy" - msgid "Select feature" msgstr "Wybierz funkcję" @@ -1312,18 +1458,24 @@ msgstr "Restartuj wybór" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Odznacz" +msgid "Cancel a feature until exit" +msgstr "Anuluj funkcję przed wyjściem" msgid "Measure" msgstr "Zmierz" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Proszę potwierdzić współczynnik eksplozji = 1 i wybrać przynajmniej jeden " +"obiekt" + msgid "Edit to scale" msgstr "Edytuj do skali" msgctxt "Verb" -msgid "Scale" -msgstr "Skala" +msgid "Scale all" +msgstr "Skaluj wszystko" msgid "None" msgstr "Brak" @@ -1337,6 +1489,48 @@ msgstr "Długość" msgid "Selection" msgstr "Wybór" +msgid " (Moving)" +msgstr " (Przesuwanie)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Wybierz 2 powierzchnie na obiektach \n" +"i połącz je razem." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Wybierz 2 punkty lub koła na obiektach \n" +"i określ odległość między nimi." + +msgid "Face" +msgstr "Powierzchnia" + +msgid " (Fixed)" +msgstr " (Stały)" + +msgid "Point" +msgstr "Punkt" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Funkcja 1 została zresetowana,\n" +"funkcja 2 została funkcją 1" + +msgid "Warning: please select Plane's feature." +msgstr "Uwaga: proszę wybrać funkcję płaszczyzny." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Uwaga: wybierz funkcję Punkt lub Okrąg." + +msgid "Warning: please select two different meshes." +msgstr "Uwaga: proszę wybrać dwie różne siatki." + msgid "Copy to clipboard" msgstr "Kopiuj do schowka" @@ -1352,8 +1546,26 @@ msgstr "Bezpośrednia odległość" msgid "Distance XYZ" msgstr "Odległość XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Równolegle" + +msgid "Center coincidence" +msgstr "Koincydencja centralna" + +msgid "Feature 1" +msgstr "Funkcja 1" + +msgid "Reverse rotation" +msgstr "Rotacja wsteczna" + +msgid "Rotate around center:" +msgstr "Obrót względem środka:" + +msgid "Parallel distance:" +msgstr "Odległość między równoległymi krawędziami:" + +msgid "Flip by Face 2" +msgstr "Obróć względem 2 powierzchni" msgid "Notice" msgstr "Uwaga" @@ -1389,11 +1601,14 @@ msgstr "" msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" -"Plik konfiguracyjny \"%1%\" został załadowany, ale niektóre wartości nie " -"zostały rozpoznane." +"Plik konfiguracyjny „%1%” został wczytany, ale niektóre wartości nie zostały " +"rozpoznane." + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca zakończy działanie z powodu braku pamięci. To może być błąd. " @@ -1444,13 +1659,17 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" "%s\n" -"Czy chcesz kontynuować?" +"Czy kontynuować?" msgid "Remember my choice" msgstr "Zapamiętaj moją decyzję" @@ -1463,10 +1682,10 @@ msgid "Click to download new version in default browser: %s" msgstr "Kliknij, aby pobrać nową wersję w domyślnej przeglądarce: %s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "Snapmaker Orca wymaga aktualizacji" +msgstr "Snapmaker Orca wymaga uaktualnienia" msgid "This is the newest version." -msgstr "To najnowsza wersja." +msgstr "To jest najnowsza wersja." msgid "Info" msgstr "Informacja" @@ -1487,32 +1706,32 @@ msgid "Rebuild" msgstr "Przebudowywuje" msgid "Loading current presets" -msgstr "Ładowanie obecnych ustawień" +msgstr "Wczytywanie obecnych ustawień" msgid "Loading a mode view" -msgstr "Ładowanie widoku trybu" +msgstr "Wczytywanie widoku trybu" -msgid "Choose one file (3mf):" -msgstr "Wybierz jeden plik (3mf):" +msgid "Choose one file (3MF):" +msgstr "Wybierz jeden plik (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Wybierz jeden lub więcej plików (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Wybierz jeden lub więcej plików (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Wybierz jeden lub więcej plików (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Wybierz jeden lub więcej plików (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Wybierz plik ZIP" -msgid "Choose one file (gcode/3mf):" -msgstr "Wybierz jeden plik (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Wybierz jeden plik (GCODE/3MF):" msgid "Some presets are modified." msgstr "Niektóre ustawienia zostały zmodyfikowane." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Możesz zachować zmodyfikowane ustawienia w nowym projekcie, odrzucić je lub " @@ -1530,9 +1749,9 @@ msgstr "Otwórz projekt" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" -"Wersja Snapmaker Orca jest przestarzała i musi zostać zaktualizowana do " +"Wersja Snapmaker Orca jest przestarzała i musi zostać uaktualniona do " "najnowszej wersji, aby działać normalnie" msgid "Privacy Policy Update" @@ -1564,13 +1783,13 @@ msgid "*" msgstr "*" msgid "The uploads are still ongoing" -msgstr "Wgrywanie trwa nadal" +msgstr "Wysyłanie trwa nadal" msgid "Stop them and continue anyway?" msgstr "Zatrzymać je i kontynuować mimo to?" msgid "Ongoing uploads" -msgstr "Trwające wgrywanie" +msgstr "Trwające wysyłanie" msgid "Select a G-code file:" msgstr "Wybierz plik G-code:" @@ -1598,10 +1817,10 @@ msgid "Rename" msgstr "Zmień nazwę" msgid "Snapmaker Orca GUI initialization failed" -msgstr "Inicjalizacja interfejsu graficznego Snapmaker Orca nie powiodła się" +msgstr "Nie udało się zainicjować interfejsu graficznego Snapmaker Orca" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Krytyczny błąd, przechwycono wyjątek: %1%" msgid "Quality" @@ -1626,22 +1845,28 @@ msgid "Strength" msgstr "Struktura" msgid "Top Solid Layers" -msgstr "Pełne Warstwy Górne" +msgstr "Pełne warstwy górne" msgid "Top Minimum Shell Thickness" msgstr "Minimalna grubość górnej powłoki" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "Pełne warstwy dolne" msgid "Bottom Minimum Shell Thickness" msgstr "Minimalna grubość dolnej powłoki" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Prasowanie" msgid "Fuzzy Skin" -msgstr "Skóra Fuzzy" +msgstr "Skóra fuzzy" msgid "Extruders" msgstr "Extrudery" @@ -1650,7 +1875,7 @@ msgid "Extrusion Width" msgstr "Szerokość ekstruzji" msgid "Wipe options" -msgstr "Opcje czyszczenia" +msgstr "Opcje wycierania" msgid "Bed adhesion" msgstr "Przyczepność do podłoża" @@ -1703,6 +1928,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "Usuń wybrany obiekt" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Wczytaj..." @@ -1722,7 +1950,10 @@ msgid "Torus" msgstr "Torus" msgid "Orca Cube" -msgstr "Sześcian Orca Design" +msgstr "Sześcian Orca" + +msgid "Orca Tolerance Test" +msgstr "Test tolerancji Orca" msgid "3DBenchy" msgstr "3DBenchy" @@ -1731,7 +1962,7 @@ msgid "Autodesk FDM Test" msgstr "Test FDM Autodesk" msgid "Voron Cube" -msgstr "Sześcian Voron Design" +msgstr "Sześcian Voron" msgid "Stanford Bunny" msgstr "Królik Stanforda" @@ -1741,14 +1972,14 @@ msgstr "Orca String Hell" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "Ten model posiada wytłoczenia tekstu na górnej powierzchni. Dla optymalnych " -"wyników zaleca się ustawienie 'Próg jednej ściany (min_width_top_surface)' " -"na 0, aby opcja 'Tylko jedna ściana na górnych powierzchniach' działała " +"wyników zaleca się ustawienie „Próg jednej ściany (min_width_top_surface)” " +"na 0, aby opcja „Tylko jedna ściana na górnych powierzchniach” działała " "najlepiej.\n" "Tak - Zmień te ustawienia automatycznie\n" "Nie - Nie zmieniaj tych ustawień" @@ -1801,6 +2032,12 @@ msgstr "Zamień na STL" msgid "Replace the selected part with new STL" msgstr "Zamień wybraną część na nowy plik STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Zmień filament" @@ -1838,16 +2075,16 @@ msgstr "Płucz do podpory obiektów" msgid "Edit in Parameter Table" msgstr "Edytuj w tabeli parametrów" -msgid "Convert from inch" -msgstr "Konwertuj z cala" +msgid "Convert from inches" +msgstr "Konwertuj z cali" -msgid "Restore to inch" -msgstr "Przywróć do cala" +msgid "Restore to inches" +msgstr "Przywróć do cali" -msgid "Convert from meter" -msgstr "Konwertuj z mm" +msgid "Convert from meters" +msgstr "Konwertuj z metra" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Przywróć do metra" msgid "Assemble" @@ -1934,9 +2171,18 @@ msgstr "Podziel wybrany obiekt" msgid "Auto orientation" msgstr "Automatyczna orientacja" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Automatyczna orientacja obiektu w celu poprawy jakości druku." +msgid "Edit" +msgstr "Edytuj" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Zaznacz wszystko" @@ -1956,13 +2202,13 @@ msgid "arrange current plate" msgstr "ustaw bieżącą płytę" msgid "Reload All" -msgstr "Przeładuj wszystko" +msgstr "Wczytaj wszystko ponownie" msgid "reload all from disk" msgstr "Przeładuj wszystko z dysku" msgid "Auto Rotate" -msgstr "Automatyczna rotacja" +msgstr "Obróć automatycznie" msgid "auto rotate current plate" msgstr "automatyczna rotacja obiektów na bieżącej płycie" @@ -1973,8 +2219,32 @@ msgstr "Usuń płytę" msgid "Remove the selected plate" msgstr "Usuń wybraną płytę" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" -msgstr "Klonuj" +msgstr "Powiel" msgid "Simplify Model" msgstr "Uprość model" @@ -1982,9 +2252,18 @@ msgstr "Uprość model" msgid "Center" msgstr "Wyśrodkuj" +msgid "Drop" +msgstr "Upuść" + msgid "Edit Process Settings" msgstr "Edytuj ustawienia procesu" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Edytuj parametry druku dla pojedynczego obiektu" @@ -2033,8 +2312,8 @@ msgstr[0] "%1$d niezamknięta krawędz" msgstr[1] "%1$d niezamknięte krawędzie" msgstr[2] "%1$d niezamkniętych krawędzi" -msgid "Right click the icon to fix model object" -msgstr "Kliknij prawym przyciskiem myszy ikonę, aby naprawić obiekt modelu" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "Kliknij prawym przyciskiem myszy ikonę, aby zmienić ustawienia obiektu" @@ -2060,7 +2339,7 @@ msgid "Click the icon to shift this object to the bed" msgstr "Kliknij ikonę, aby przenieść ten obiekt na stół" msgid "Loading file" -msgstr "Ładowanie pliku" +msgstr "Wczytywanie pliku" msgid "Error!" msgstr "Błąd!" @@ -2086,6 +2365,9 @@ msgstr "" "Przełącz się w tryb edycji ustawień druku dla każdego obiektu, aby edytować " "ustawienia procesu dla wybranych obiektów." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Usuń łącznik z obiektu będącego częścią przecięcia" @@ -2104,10 +2386,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "To działanie przerwie korespondencję cięcia.\n" "Po tym nie można zagwarantować spójności modelu.\n" @@ -2121,12 +2403,11 @@ msgstr "Usuń wszystkie łączniki" msgid "Deleting the last solid part is not allowed." msgstr "Usunięcie ostatniej części bryły jest niedozwolone." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "" -"Obiekt docelowy zawiera tylko jedną część i nie może zostać podzielony." msgid "Assembly" -msgstr "Zestawienie" +msgstr "Złożenie" msgid "Cut Connectors information" msgstr "Usuń informacje o łącznikach" @@ -2165,14 +2446,14 @@ msgid "Selection conflicts" msgstr "Konflikty wyboru" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Jeśli pierwszy zaznaczony element to obiekt, to drugi powinien również być " "obiektem." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Jeśli pierwszy zaznaczony element to część, to drugi powinien być częścią " "tego samego obiektu." @@ -2190,7 +2471,7 @@ msgid "Support Enforcer" msgstr "Wzmocnienie podpory" msgid "Type:" -msgstr "Typ:" +msgstr "Rodzaj:" msgid "Choose part type" msgstr "Wybierz rodzaj części" @@ -2239,7 +2520,7 @@ msgstr "" "jedna komórka może być skopiowana do jednej lub wielu komórek w tej samej " "kolumnie" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "kopiowanie wielu komórek nie jest obsługiwane" msgid "Outside" @@ -2249,25 +2530,28 @@ msgid "Layer height" msgstr "Wysokość warstwy" msgid "Wall loops" -msgstr "Ilość obwodów ściany" +msgstr "Liczba pętli ściany" msgid "Infill density(%)" msgstr "Gęstość wypełnienia (%)" msgid "Auto Brim" -msgstr "Automatyczny Brim" +msgstr "Automatyczny brim" msgid "Mouse ear" -msgstr "Ucho Myszy" +msgstr "Ucho myszy" + +msgid "Painted" +msgstr "Malowane" msgid "Outer brim only" -msgstr "Tylko zewn. Brim" +msgstr "Tylko zewnętrzny brim" msgid "Inner brim only" -msgstr "Tylko wewn. Brim" +msgstr "Tylko wewnętrzny brim" msgid "Outer and inner brim" -msgstr "Zewn. i wewn. Brim" +msgstr "Zewnętrzny i wewnętrzny brim" msgid "No-brim" msgstr "Bez brimu" @@ -2276,7 +2560,7 @@ msgid "Outer wall speed" msgstr "Prędkość zewnętrznej ściany" msgid "Plate" -msgstr "Stół" +msgstr "Płyta" msgid "Brim" msgstr "Brim" @@ -2291,7 +2575,7 @@ msgid "Multicolor Print" msgstr "Druk wielobarwny" msgid "Line Type" -msgstr "Typ linii" +msgstr "Rodzaj linii" msgid "More" msgstr "Więcej" @@ -2411,23 +2695,8 @@ msgstr "Proszę sprawdzić połączenie sieciowe drukarki i Orca." msgid "Connecting..." msgstr "Łączenie..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Puste" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto. uzupełnienie" - -msgid "AMS not connected" -msgstr "AMS niepodłączony" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Ładuj" @@ -2435,30 +2704,124 @@ msgstr "Ładuj" msgid "Unload" msgstr "Rozładuj" -msgid "Ext Spool" -msgstr "zew.szpula" - -msgid "Tips" -msgstr "Wskazówki" - -msgid "Guide" -msgstr "Instr." - -msgid "Retry" -msgstr "Ponów" - -msgid "Calibrating AMS..." -msgstr "Kalibracja AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"Wystąpił problem podczas kalibracji. Kliknij, aby zobaczyć rozwiązanie." +"Wybierz gniazdo AMS, a następnie naciśnij przycisk „Ładuj” lub „Rozładuj”, " +"aby automatycznie załadować lub wyładować filamenty." -msgid "Calibrate again" -msgstr "Kalibruj ponownie" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "Anuluj kalibrację" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtr" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Chłodzenie" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Góra" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Pomocn." + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "Bezczynność..." @@ -2473,50 +2836,41 @@ msgid "Pull back current filament" msgstr "Wycofuje obecny filament" msgid "Push new filament into extruder" +msgstr "Załaduj nowy filament do extrudera" + +msgid "Grab new filament" msgstr "" "Załaduj nowy\n" -"filament do extrudera" +"filament" msgid "Purge old filament" msgstr "Oczyść dyszę" -msgid "Feed Filament" -msgstr "Podaj filament" - msgid "Confirm extruded" msgstr "Potwierdź wytłaczanie" msgid "Check filament location" msgstr "Sprawdź lokalizację filamentu" -msgid "Grab new filament" +msgid "The maximum temperature cannot exceed " msgstr "" -"Załaduj nowy\n" -"filament" + +msgid "The minmum temperature should not be less than " +msgstr "Minimalna temperatura nie powinna być mniejsza niż " msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." -msgstr "" -"Wybierz gniazdo AMS, a następnie naciśnij przycisk \"Ładuj\" lub \"Rozładuj" -"\" ,aby automatycznie załadować lub wyładować filamenty." - -msgid "Edit" -msgstr "Edytuj" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Wszystkie wybrane obiekty są na zablokowanej płycie,\n" "Nie można zastosować automatycznego układu tych obiektów." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Nie wybrano obiektów do układania." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Ta płyta jest zablokowana,\n" "Nie można zastosować automatycznego układu na tej płycie." @@ -2556,15 +2910,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Wszystkie wybrane obiekty są na zablokowanej płycie,\n" "Nie można zastosować automatycznej orientacji na tych obiektach." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Ta płyta jest zablokowana,\n" "Nie można zastosować automatycznej orientacji na tej płycie." @@ -2600,7 +2954,7 @@ msgid "Logging in" msgstr "Logowanie" msgid "Login failed" -msgstr "Logowanie nie powiodło się" +msgstr "Nie udało się zalogować" msgid "Please check the printer network connection." msgstr "Proszę sprawdzić połączenie sieciowe drukarki." @@ -2618,7 +2972,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Nie udało się połączyć z usługą w chmurze. Spróbuj ponownie." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Plik druku nie znaleziony. Proszę powtórzyć cięcie." msgid "" @@ -2647,7 +3001,7 @@ msgstr "" "Rozmiar pliku drukowania jest zbyt duży. Proszę dostosować rozmiar pliku i " "spróbować ponownie." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Nie znaleziono pliku drukowania; proszę ponownie pociąć i wysłać do druku." @@ -2684,21 +3038,58 @@ msgstr "Pomyślnie wysłano. Automatyczne przejście do strony urządzenia za %s msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Pomyślnie wysłano. Automatyczne przejście do następnej strony za %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Przed drukowaniem przez LAN należy włożyć kartę SD." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "Wysyłanie pliku G-code przez LAN" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Wysyłanie pliku G-code na kartę SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Pomyślnie wysłano. Zamknięcie bieżącej strony za %ss" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Przed wysłaniem do drukarki należy włożyć kartę SD." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Importowanie archiwum SLA" @@ -2736,12 +3127,12 @@ msgid "Downloading" msgstr "Pobieranie" msgid "Download failed" -msgstr "Pobieranie nie powiodło się" +msgstr "Nie udało się pobrać" -msgid "Cancelled" -msgstr "Anulowane" +msgid "Canceled" +msgstr "Anulowano" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Instalacja zakończona pomyślnie." msgid "Installing" @@ -2765,8 +3156,8 @@ msgstr "Snapmaker Orca jest licencjonowany na zasadach " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, wersja 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca opiera się na projektach PrusaSlicer i BambuStudio" msgid "Libraries" msgstr "Biblioteki" @@ -2782,18 +3173,14 @@ msgstr "" msgid "About %s" msgstr "O %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "" -"Snapmaker Orca opiera się na projektach BambuStudio, PrusaSlicer i SuperSlicer." +msgstr "Snapmaker Orca jest oparty na BambuStudio, PrusaSlicer i SuperSlicer." msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "BambuStudio bazuje na PrusaSlicer od PrusaResearch." +msgstr "BambuStudio jest oparty na PrusaSlicer od PrusaResearch." msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." -msgstr "PrusaSlicer początkowo opiera się na Slic3r od Alessandro Ranellucci." +msgstr "PrusaSlicer początkowo oparty na Slic3r od Alessandro Ranellucci." msgid "" "Slic3r was created by Alessandro Ranellucci with the help of many other " @@ -2816,14 +3203,11 @@ msgstr "Potwierdź" msgid "Close" msgstr "Zamknij" -msgid "Colour" -msgstr "Kolor" - msgid "" "Nozzle\n" "Temperature" msgstr "" -"Temp.\n" +"Temperatura\n" "dyszy" msgid "max" @@ -2839,10 +3223,6 @@ msgstr "Wartość wejściowa powinna być większa niż %1% i mniejsza niż %2%" msgid "SN" msgstr "Numer seryjny" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"Ustawianie informacji o gnieździe AMS podczas druku nie jest obsługiwane" - msgid "Factors of Flow Dynamics Calibration" msgstr "współczynnik kalibracji dynamiki przepływu" @@ -2855,15 +3235,19 @@ msgstr "Factor K" msgid "Factor N" msgstr "Współczynnik N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"Ustawianie informacji o gnieździe AMS podczas druku nie jest obsługiwane" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "Ustawianie informacji o wirtualnym slocie podczas druku nie jest obsługiwane" msgid "Are you sure you want to clear the filament information?" -msgstr "Czy na pewno chcesz usunąć informacje o filamentach?" +msgstr "Czy na pewno usunąć informacje o filamentach?" msgid "You need to select the material type and color first." -msgstr "Najpierw musisz wybrać typ i kolor filamentu." +msgstr "Najpierw należy wybrać rodzaj i kolor filamentu." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" @@ -2874,6 +3258,15 @@ msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" "Proszę podać prawidłową wartość (K w zakresie %.1f~%.1f, N in %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Inny kolor" @@ -2896,7 +3289,7 @@ msgid "Nozzle Diameter" msgstr "Średnica dyszy" msgid "Bed Type" -msgstr "Typ Płyty" +msgstr "Typ płyty" msgid "Nozzle temperature" msgstr "Temperatura dyszy" @@ -2907,15 +3300,9 @@ msgstr "Temperatura stołu" msgid "Max volumetric speed" msgstr "Maksymalna prędkość przepływu" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Temperatura stołu" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Rozpocznij kalibrację" @@ -2957,14 +3344,79 @@ msgstr "Kalibracja Dynamiki Przepływu" msgid "Step" msgstr "Krok" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "Gniazda AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Zewnętrzny" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Dysza" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Uwaga: można wybierać tylko sloty AMS załadowane tym samym rodzajem " -"filamentu." msgid "Enable AMS" msgstr "Włącz AMS" @@ -2978,13 +3430,10 @@ msgstr "Wyłącz AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Drukukowanie filamentem zamontowanym na tylnej części obudowy" -msgid "Current Cabin humidity" -msgstr "Aktualna wilgotność w komorze" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Pamiętaj o wymianie pakietu pochłaniacza wilgoci gdy stanie się on zbyt " @@ -2994,7 +3443,7 @@ msgstr "" "również spowolnią ten proces." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Konfiguruj, które gniazdo AMS powinno być używane dla filamentu w trakcie " "zadania drukowania" @@ -3015,13 +3464,22 @@ msgid "Print using materials mounted on the back of the case" msgstr "" "Drukowanie przy użyciu materiałów zamontowanych na tylnej części obudowy" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Drukowanie filamentem z AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "" "Drukowanie przy użyciu materiałów zamontowanych na tylnej części obudowy" +msgid "Auto Refill" +msgstr "Auto. uzupełnienie" + +msgid "Left" +msgstr "Lewo" + +msgid "Right" +msgstr "Prawo" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3029,9 +3487,17 @@ msgstr "" "Gdy obecny filament się skończy, drukarka będzie kontynuować druk w " "następującej kolejności." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Grupa" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Obecnie drukarka nie obsługuje automatycznego uzupełniania." @@ -3042,15 +3508,10 @@ msgstr "" "ustawieniach AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"W przypadku, gdy podczas drukowania w systemie AMS zużyje się jeden z " -"filamentów, system automatycznie przełączy na drugi identyczny filament.\n" -"(System obecnie wspiera automatyczne przełączanie na materiały " -"eksploatacyjne tej samej marki, rodzaju i koloru)" msgid "DRY" msgstr "SUCHY" @@ -3062,7 +3523,7 @@ msgid "AMS Settings" msgstr "Ustawienia AMS" msgid "Insertion update" -msgstr "Aktualizacja wymiany" +msgstr "Aktualizacja przy wstawieniu" msgid "" "The AMS will automatically read the filament information when inserting a " @@ -3072,7 +3533,7 @@ msgstr "" "włożeniu. To zajmie około 20 sekund." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Uwaga: jeśli podczas drukowania zostanie włożony nowy filament, system AMS " @@ -3091,8 +3552,8 @@ msgstr "Aktualizacja po włączeniu zasilania" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS automatycznie odczyta informacje o włożonym filamencie podczas " "uruchamiania. To zajmie około 1 minuty. Proces odczytu sprawi, że rolki " @@ -3111,20 +3572,16 @@ msgid "Update remaining capacity" msgstr "Aktualizuj pozostałą ilość" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS oszacuje pozostałą ilość filamentu Bambu po aktualizacji informacji o " -"filamencie. Podczas drukowania, pozostała ilość na szpuli będzie " -"aktualizowana automatycznie." msgid "AMS filament backup" msgstr "Automatyczne przełączenie filamentu AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS automatycznie przełączy się na inną szpule z tym samym rodzajem " "filamentu, gdy obecny filament się skończy" @@ -3160,7 +3617,7 @@ msgstr "" "usunięta przez oprogramowanie antywirusowe." msgid "click here to see more info" -msgstr "cliknij tutaj, aby zobaczyć więcej informacji" +msgstr "kliknij tutaj, aby zobaczyć więcej informacji" msgid "Please home all axes (click " msgstr "Ustaw wszystkie osie na pozycje domową (kliknij " @@ -3173,7 +3630,7 @@ msgstr "" "poza możliwy obszar druku, co chroni sprzęt przed zużyciem." msgid "Go Home" -msgstr "Poz.Domowa" +msgstr "Poz. domowa" msgid "" "A error occurred. Maybe memory of system is not enough or it's a bug of the " @@ -3181,10 +3638,14 @@ msgid "" msgstr "" "Wystąpił błąd. Być może brakuje pamięci w systemie lub jest to błąd programu" -msgid "Please save project and restart the program. " -msgstr "Proszę zapisać projekt i ponownie uruchomić program. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Wystąpił błąd krytyczny: \"%1%\"" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Zapisz projekt i uruchom program ponownie." + +msgid "Processing G-code from Previous file..." msgstr "Przetwarzanie G-code z poprzedniego pliku..." msgid "Slicing complete" @@ -3217,7 +3678,7 @@ msgstr "Uruchamianie skryptu post-procesingu" msgid "Successfully executed post-processing script" msgstr "Pomyślnie wykonano skrypt post-processingu" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Nieznany błąd podczas eksportowania G-code." #, boost-format @@ -3271,12 +3732,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Plik G-code został wyeksportowany do %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Nieznany błąd podczas eksportowania G-code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3293,226 +3754,6 @@ msgstr "" "Planowanie przesyłania do `%1%`. Zobacz Okno -> Kolejka przesyłania do hosta " "drukarki" -msgid "Device" -msgstr "Urządzenie" - -msgid "Task Sending" -msgstr "Wysyłanie zadań" - -msgid "Task Sent" -msgstr "Wysłane do druku" - -msgid "Edit multiple printers" -msgstr "Edycja drukarek" - -msgid "Select connected printers (0/6)" -msgstr "Wybierz podłączone drukarki (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Wybierz Podłączone Drukarki (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "Maksymalna liczba drukarek, które można wybrać, to %d" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "Brak zadania" - -msgid "View" -msgstr "Widok" - -msgid "N/A" -msgstr "N/D" - -msgid "Edit Printers" -msgstr "Edycja drukarek" - -msgid "Device Name" -msgstr "Nazwa urządzenia" - -msgid "Task Name" -msgstr "Nazwa zadania" - -msgid "Device Status" -msgstr "Status urządzenia" - -msgid "Actions" -msgstr "Działania" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Proszę wybrać urządzenia, którymi chciałbyś tutaj zarządzać (do 6 urządzeń)" - -msgid "Add" -msgstr "Dodaj" - -msgid "Idle" -msgstr "Bezczynny" - -msgid "Printing" -msgstr "Drukowanie" - -msgid "Upgrading" -msgstr "Aktualizacja" - -msgid "Incompatible" -msgstr "Niekompatybilne" - -msgid "syncing" -msgstr "synchronizacja" - -msgid "Printing Finish" -msgstr "Drukowanie zakończone" - -msgid "Printing Failed" -msgstr "Drukowanie nie powiodło się" - -msgid "Printing Pause" -msgstr "Drukowanie wstrzymane" - -msgid "Prepare" -msgstr "Przygotowanie" - -msgid "Slicing" -msgstr "Cięcie" - -msgid "Pending" -msgstr "W toku" - -msgid "Sending" -msgstr "Wysyłanie" - -msgid "Sending Finish" -msgstr "Wysłanie ukończone" - -msgid "Sending Cancel" -msgstr "Anulowano wysyłanie" - -msgid "Sending Failed" -msgstr "Wysyłanie nieudane" - -msgid "Print Success" -msgstr "Pomyślnie wydrukowano" - -msgid "Print Failed" -msgstr "Drukowanie nie powiodło się" - -msgid "Removed" -msgstr "Usunięto" - -msgid "Resume" -msgstr "Wznów" - -msgid "Stop" -msgstr "Zatrzymaj" - -msgid "Task Status" -msgstr "Status Zadania" - -msgid "Sent Time" -msgstr "Czas wysłania" - -msgid "There are no tasks to be sent!" -msgstr "Brak zadań do wysłania!" - -msgid "No historical tasks!" -msgstr "Brak historii zadań!" - -msgid "Loading..." -msgstr "Wczytywanie..." - -msgid "No AMS" -msgstr "Brak AMS" - -msgid "Send to Multi-device" -msgstr "Wyślij do wielu urządzeń" - -msgid "Preparing print job" -msgstr "Przygotowywanie zadania do druku" - -msgid "Abnormal print file data. Please slice again" -msgstr "Nieprawidłowe dane pliku druku. Proszę ponownie przetnij" - -msgid "There is no device available to send printing." -msgstr "Brak dostępnego urządzenia lub nie zostało wybrane." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "Liczba używanych jednocześnie drukarek nie może być równa 0." - -msgid "Use External Spool" -msgstr "Użyj zewnętrznej szpuli" - -msgid "Use AMS" -msgstr "Użyj AMS" - -msgid "Select Printers" -msgstr "Wybierz drukarki" - -msgid "Ams Status" -msgstr "Status Ams" - -msgid "Printing Options" -msgstr "Opcje drukowania" - -msgid "Bed Leveling" -msgstr "Poziomowanie stołu" - -msgid "Timelapse" -msgstr "Timelaps" - -msgid "Flow Dynamic Calibration" -msgstr "Kalibracja Dynamiki Przepływu" - -msgid "Send Options" -msgstr "Opcje wysyłania" - -msgid "Send to" -msgstr "Wyślij do" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"drukarek jednocześnie. (Zależy to od liczby urządzeń, które można podgrzewać " -"jednocześnie.)" - -msgid "Wait" -msgstr "Czekaj" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minut na każdą partię. (Zależy od tego, jak długo trwa proces nagrzewania.)" - -msgid "Send" -msgstr "Wyślij" - -msgid "Name is invalid;" -msgstr "Nazwa jest nieprawidłowa;" - -msgid "illegal characters:" -msgstr "niedozwolone znaki:" - -msgid "illegal suffix:" -msgstr "niedozwolony sufiks:" - -msgid "The name is not allowed to be empty." -msgstr "Nazwa nie może być pusta." - -msgid "The name is not allowed to start with space character." -msgstr "Nazwa nie może zaczynać się od znaku spacji." - -msgid "The name is not allowed to end with space character." -msgstr "Nazwa nie może kończyć się na znak spacji." - -msgid "The name length exceeds the limit." -msgstr "Długość nazwy przekracza limit." - msgid "Origin" msgstr "Punkt bazowy" @@ -3538,7 +3779,7 @@ msgid "Circular" msgstr "Okrągły" msgid "Load shape from STL..." -msgstr "Załaduj kształt z pliku STL..." +msgstr "Wczytaj kształt z pliku STL..." msgid "Settings" msgstr "Ustawienia" @@ -3581,12 +3822,13 @@ msgstr "Wybierz plik STL do zaimportowania modelu stołu z:" msgid "Bed Shape" msgstr "Kształt stołu" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Zalecana temperatura jest poniżej minimalnych 190 stopni lub temperatura " -"przekracza zalecane maksimum 300 stopni.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3610,23 +3852,23 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Zalecana temperatura dyszy dla tego typu filamentu wynosi [%d, %d] stopni " "Celsjusza" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Zbyt mała maksymalna prędkość przepływu.\n" "Zresetowano do 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "Obecna temperatura komory jest wyższa niż bezpieczna temperatura dla " @@ -3635,14 +3877,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Zbyt mała wysokość warstwy.\n" "Zresetowano do 0,2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Zbyt mała odległość między ścieżkami przy prasowaniu.\n" "Zresetowano do 0,1" @@ -3688,21 +3930,21 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" "Alternatywna dodatkowa ściana działa tylko wtedy, gdy jest wyłączona opcja " -"\"zapewnij stałą grubość pionowej powłoki\". " +"„zapewnij stałą grubość pionowej powłoki”." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "Zmienić te ustawienia automatycznie?\n" -"Tak - Wyłącz \"zapewnij pionową grubość powłoki\" i włącz \"alternatywną " -"dodatkową ścianę\"\n" -"Nie - Nie używaj \"alternatywnej dodatkowej ściany\"" +"Tak - Wyłącz „zapewnij pionową grubość powłoki” i włącz „alternatywną " +"dodatkową ścianę”\n" +"Nie - Nie używaj „alternatywnej dodatkowej ściany”" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3741,49 +3983,60 @@ msgstr "" "TAK - Zachowaj Wieżę czyszczącą\n" "NIE - Zachowaj Niezależną wysokość warstwy podpory" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Podczas drukowania według obiektu extruder może zderzyć się z obrysem " -"skirtu.\n" -"Dlatego zresetuj wysokość skirtu na 1, aby tego uniknąć." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" -"seam_slope_start_height musi być mniejsza niż wysokość warstwy. \n" +"seam_slope_start_height musi być mniejsza niż wysokość warstwy.\n" "Zresetuj do wartości 0" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Tryb Wazy działa tylko wtedy gdy liczba pętli ściany wynosi 1, wyłączone są " -"podpory, liczba warstw górnej powłoki wynosi 0, gęstość wypełnienia wynosi " -"0, a tryb Timelaps ustawiony jest na Tradycyjny." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Jednak maszyny z budową I3 nie będą generować filmów timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Czy zmienić te ustawienia automatycznie? \n" +"Czy zmienić te ustawienia automatycznie?\n" "Tak - Zmień te ustawienia automatycznie i włącz tryb Wazy\n" "Nie - Zrezygnuj tym razem z używania trybu Wazy" +msgid "Printing" +msgstr "Drukowanie" + msgid "Auto bed leveling" msgstr "Automatyczne poziomowanie stołu" msgid "Heatbed preheating" msgstr "Rozgrzewanie stołu" -msgid "Sweeping XY mech mode" -msgstr "Pomiar rezonansu osi XY" +msgid "Vibration compensation" +msgstr "Kompensacja drgań" msgid "Changing filament" msgstr "Zmiana filamentu" @@ -3791,14 +4044,14 @@ msgstr "Zmiana filamentu" msgid "M400 pause" msgstr "Pauza M400" -msgid "Paused due to filament runout" -msgstr "Pauza z powodu wyczerpania filamentu" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Nagrzewanie dyszy" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Kalibracja ekstruzji" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Skanowanie powierzchni stołu" @@ -3821,118 +4074,201 @@ msgstr "Czyszczenie końcówki dyszy" msgid "Checking extruder temperature" msgstr "Sprawdzanie temperatury extrudera" -msgid "Printing was paused by the user" -msgstr "Druk został wstrzymany przez użytkownika" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Pauza - osłona głowicy drukującej odpadła" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Kalibracja mikro Lidaru" -msgid "Calibrating extrusion flow" -msgstr "Kalibracja przepływu ekstruzji" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pauza z powodu awarii temperatury dyszy" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pauza z powodu awarii temperatury stołu" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Wyładowywanie filamentu" -msgid "Skip step pause" -msgstr "Pauza pominięcia kroku" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Wczytywanie filamentu" -msgid "Motor noise calibration" -msgstr "Kalibracja hałasu silnika" +msgid "Motor noise cancellation" +msgstr "Redukcja hałasu silników" -msgid "Paused due to AMS lost" -msgstr "Pauza z powodu utraty AMS" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Wstrzymano z powodu niskiej prędkości wentylatora chłodzącego hotend" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Pauza z powodu błędu kontroli temperatury komory" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Chłodzenie komory" -msgid "Paused by the Gcode inserted by user" -msgstr "Pauza spowodowana wstawionym przez użytkownika Gcode" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Prezentacja hałasu silnika" -msgid "Nozzle filament covered detected pause" -msgstr "Pauza - dysza pokryta filamentem" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Pauza z powodu błędu noża" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Pauza z powodu błędu pierwszej warstwy" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Pauza z powodu zatkanej dyszy" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Nieznany" -msgid "Fatal" -msgstr "Krytyczny" - -msgid "Serious" -msgstr "Poważny" - -msgid "Common" -msgstr "Wspólny" - msgid "Update successful." msgstr "Aktualizacja udana." msgid "Downloading failed." -msgstr "Pobieranie nie powiodło się." +msgstr "Nie udało się pobrać." msgid "Verification failed." -msgstr "Weryfikacja nieudana." +msgstr "Nie udało się zweryfikować." msgid "Update failed." -msgstr "Aktualizacja nieudana." +msgstr "Nie udało się uaktualnić." + +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" msgid "" "The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" "TPU) is not allowed to be loaded." msgstr "" -"Aktualna temperatura komory lub docelowa temperatura komory przekracza 45℃. " -"Aby uniknąć zatkania extrudera, niedopuszczalne jest ładowanie filamentu o " -"niskiej temperaturze (PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"W extruderze jest załadowany filament o niskiej temperaturze (PLA/PETG/TPU). " -"Aby uniknąć zatkania extrudera, nie wolno ustawiać temperatury komory " -"powyżej 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Jeśli ustawisz temperaturę komory poniżej 40℃, kontrola temperatury komory " "nie będzie aktywowana. Docelowa temperatura komory zostanie automatycznie " "ustawiona na 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Nie udało się rozpocząć zadania drukowania" msgid "" @@ -3945,31 +4281,77 @@ msgstr "Bieżący parametr kalibracji przepływu jest nieprawidłowy" msgid "Selected diameter and machine diameter do not match" msgstr "Wybrana średnica i średnica maszyny nie pasują do siebie" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Nie udało się wygenerować kodu kalibracji" msgid "Calibration error" msgstr "Błąd kalibracji" -msgid "TPU is not supported by AMS." -msgstr "TPU nie jest obsługiwane przez AMS." +msgid "Resume Printing" +msgstr "Wznów zadanie drukowania" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF nie jest obsługiwane przez AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Wilgotne PVA staje się elastyczne i może utknąć wewnątrz AMS, proszę " -"pamiętać o wysuszeniu go przed użyciem." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Zatrzymaj Drukowanie" + +msgid "Check Assistant" +msgstr "Sprawdź Asystenta" + +msgid "Filament Extruded, Continue" +msgstr "Gotowe, kontynuuj" + +msgid "Not Extruded Yet, Retry" +msgstr "Jeszcze nie wytłoczono, spróbuj ponownie" + +msgid "Finished, Continue" +msgstr "Zakończono, kontynuuj" + +msgid "Load Filament" +msgstr "Ładuj filament" + +msgid "Filament Loaded, Resume" +msgstr "Filament załadowany, wznów" + +msgid "View Liveview" +msgstr "Podgląd na żywo" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Gotowe" + +msgid "Retry" +msgstr "Ponów" + +msgid "Resume" +msgstr "Wznów" + +msgid "Unknown error." msgstr "" -"Filamenty CF/GF są twarde i kruche, łatwo je złamać i zaklinować w AMS, " -"proszę używać ostrożnie." msgid "default" msgstr "domyślny" @@ -3981,7 +4363,7 @@ msgstr "Edytuj własny G-code (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Prametry zdefiniowane (Podwójne kliknięcie, aby dodać do G-code)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Szukaj zmiennych w G-code" msgid "Add selected placeholder to G-code" @@ -4012,7 +4394,7 @@ msgid "Dimensions" msgstr "Wymiary" msgid "Temperatures" -msgstr "Temperatura" +msgstr "Temperatury" msgid "Timestamps" msgstr "Sygnatura czasowa" @@ -4040,12 +4422,12 @@ msgid "parameter name" msgstr "nazwa parametru" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s nie może być procentem" #, c-format, boost-format msgid "Value %s is out of range, continue?" -msgstr "Wartość %s jest poza zakresem, kontynuować?" +msgstr "Wartość %s jest poza zakresem. Czy kontynuować?" msgid "Parameter validation" msgstr "Walidacja parametru" @@ -4073,7 +4455,7 @@ msgid "" "\"%1%\"" msgstr "" "Nieprawidłowy format wejściowy. Oczekiwany jest wektor wymiarów w " -"następującym formacie: \"%1%\"" +"następującym formacie: „%1%”" msgid "Input value is out of range" msgstr "Wartość wejściowa jest poza zakresem" @@ -4081,9 +4463,26 @@ msgstr "Wartość wejściowa jest poza zakresem" msgid "Some extension in the input is invalid" msgstr "Rozszerzenie w danych wejściowych jest nieprawidłowe" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "Nieprawidłowy format. Oczekiwano formatu wektorowego: \"%1%\"" +msgstr "Nieprawidłowy format. Oczekiwano formatu wektorowego: „%1%”" + +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" msgid "Layer Height" msgstr "Wysokość warstwy" @@ -4094,9 +4493,6 @@ msgstr "Szerokość linii" msgid "Fan Speed" msgstr "Prędkość wentylatora" -msgid "Temperature" -msgstr "Temperatura" - msgid "Flow" msgstr "Przepływ" @@ -4107,7 +4503,7 @@ msgid "Layer Time" msgstr "Czas warstwy" msgid "Layer Time (log)" -msgstr "Czas warstwy (log)" +msgstr "Czas warstwy (logarytmicznie)" msgid "Height: " msgstr "Wysokość: " @@ -4130,8 +4526,8 @@ msgstr "Wentylator: " msgid "Temperature: " msgstr "Temperatura: " -msgid "Loading G-codes" -msgstr "Ładowanie G-kodów" +msgid "Loading G-code" +msgstr "Wczytywanie G-kodów" msgid "Generating geometry vertex data" msgstr "Generowanie danych wierzchołków geometrii" @@ -4158,10 +4554,76 @@ msgid "Total Estimation" msgstr "Podsumowanie" msgid "Total time" -msgstr "Czas całkowity" +msgstr "Łączny czas" msgid "Total cost" -msgstr "Koszt całkowity" +msgstr "Łączny koszt" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Wskazówki:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Wskazówki" msgid "up to" msgstr "do" @@ -4172,17 +4634,11 @@ msgstr "powyżej" msgid "from" msgstr "od" -msgid "Color Scheme" -msgstr "Schemat kolorów" - msgid "Time" msgstr "Czas" -msgid "Percent" -msgstr "Procent" - -msgid "Used filament" -msgstr "Użyty filament" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Wysokość warstwy (mm)" @@ -4203,38 +4659,38 @@ msgid "Volumetric flow rate (mm³/s)" msgstr "Natężenie przepływu (mm³/s)" msgid "Travel" -msgstr "Prędkość jałowa" +msgstr "Przemieszczenie" msgid "Seams" -msgstr "Szwy" +msgstr "Szew" msgid "Retract" msgstr "Retrakcja" msgid "Unretract" -msgstr "Unretrakcja" +msgstr "Deretrakcja" msgid "Filament Changes" msgstr "Zmiany filamentu" msgid "Wipe" -msgstr "Czyszczenie" +msgstr "Wytarcie dyszy" msgid "Options" msgstr "Opcje" msgid "travel" -msgstr "prędkość jałowa" +msgstr "przemieszczenie" msgid "Extruder" -msgstr "Extruder" - -msgid "Filament change times" -msgstr "Liczba zmian filamentu" +msgstr "Ekstruder" msgid "Cost" msgstr "Koszt" +msgid "Filament change times" +msgstr "Liczba zmian filamentu" + msgid "Color change" msgstr "Zmiana koloru" @@ -4244,10 +4700,7 @@ msgstr "Drukuj" msgid "Printer" msgstr "Drukarka" -msgid "Custom g-code" -msgstr "Niestandardowy G-code" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Zmiana narzędzia" msgid "Time Estimation" @@ -4257,7 +4710,7 @@ msgid "Normal mode" msgstr "Tryb normalny" msgid "Total Filament" -msgstr "Całkowita ilość filamentu" +msgstr "Łączna ilość filamentu" msgid "Model Filament" msgstr "Filament modelu" @@ -4266,7 +4719,7 @@ msgid "Prepare time" msgstr "Czas przygotowania" msgid "Model printing time" -msgstr "Czas druku modelu" +msgstr "Czas drukowania modelu" msgid "Switch to silent mode" msgstr "Przełącz się w tryb cichy" @@ -4274,11 +4727,24 @@ msgstr "Przełącz się w tryb cichy" msgid "Switch to normal mode" msgstr "Przełącz się w tryb normalny" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Zmienna wysokość warstwy" msgid "Adaptive" -msgstr "Adaptacyjny" +msgstr "Adaptacyjne" msgid "Quality / Speed" msgstr "Jakość / Prędkość" @@ -4290,29 +4756,17 @@ msgid "Radius" msgstr "Promień" msgid "Keep min" -msgstr "Zachowaj minimum" - -msgid "Left mouse button:" -msgstr "Lewy przycisk myszy:" +msgstr "Zachowanie minimum" msgid "Add detail" msgstr "Dodaj szczegół" -msgid "Right mouse button:" -msgstr "Prawy przycisk myszy:" - msgid "Remove detail" msgstr "Usuń szczegół" -msgid "Shift + Left mouse button:" -msgstr "Shift + Lewy przycisk myszy:" - msgid "Reset to base" msgstr "Resetuj do ustawień podstawowych" -msgid "Shift + Right mouse button:" -msgstr "Shift + Prawy przycisk myszy:" - msgid "Smoothing" msgstr "Wygładzanie" @@ -4325,6 +4779,55 @@ msgstr "Zwiększ/zmniejsz obszar edycji" msgid "Sequence" msgstr "Kolejność" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Lustro obiektu" @@ -4370,11 +4873,25 @@ msgstr "Unikaj obszaru kalibracji ekstruzji" msgid "Align to Y axis" msgstr "Wyrównaj do osi Y" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Dodaj" + msgid "Add plate" msgstr "Dodaj płytę" -msgid "Auto orient" -msgstr "Automatyczna orientacja" +msgid "Auto orient all/selected objects" +msgstr "Automatyczna orientacja wszystkie/wybrane obiekty" + +msgid "Auto orient all objects on current plate" +msgstr "Automatyczna orientacja wszystkie obiekty na bieżącej płycie" msgid "Arrange all objects" msgstr "Rozmieść wszystkie obiekty" @@ -4394,11 +4911,29 @@ msgstr "Widok montażu" msgid "Select Plate" msgstr "Wybierz płytę" +msgid "Slicing" +msgstr "Cięcie" + +msgid "Slice all" +msgstr "Potnij wszystkie płyty" + +msgid "Failed" +msgstr "Nieudane" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "Powrót do montażu" -msgid "return" -msgstr "wróć" +msgid "Return" +msgstr "Wróć" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Pasek narzędzi do malowania" @@ -4412,6 +4947,9 @@ msgstr "Widok przekroju" msgid "Assemble Control" msgstr "Kontrola montażu" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Całkowita objętość:" @@ -4426,32 +4964,71 @@ msgstr "Rozmiar:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Wykryto konflikty ścieżek G-code na warstwie %d, z = %.2lf mm. Proszę " +"Wykryto konflikty ścieżek G-code na warstwie %d, Z = %.2lfmm. Proszę " "oddalić od siebie obiekty będące w konflikcie (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Obiekt jest położony poza granicą płyty." msgid "A G-code path goes beyond the max print height." msgstr "Trasa G-code wychodzi poza maksymalną wysokość druku." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Trasa G-code wychodzi poza granicę płyty." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Widoczny jest tylko edytowany obiekt." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Obiekt jest umieszczony poza granicą płyty lub przekracza limit wysokości.\n" -"Rozwiąż problem, przesuwając go całkowicie na płytę lub poza nią oraz " -"potwierdzając, że wysokość mieści się w obszarze roboczym." msgid "Calibration step selection" msgstr "Wybór kroku kalibracji" @@ -4462,11 +5039,8 @@ msgstr "Kalibracja mikro lidar" msgid "Bed leveling" msgstr "Poziomowanie stołu" -msgid "Vibration compensation" -msgstr "Kompensacja drgań" - -msgid "Motor noise cancellation" -msgstr "Redukcja hałasu silników" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Program kalibracji" @@ -4490,7 +5064,7 @@ msgid "Completed" msgstr "Zakończone" msgid "Calibrating" -msgstr "Kalibracja" +msgstr "Kalibrowanie" msgid "No step selected" msgstr "Nie wybrano kroku" @@ -4519,24 +5093,21 @@ msgstr "Zewnętrzna kamera IP" msgid "Show \"Live Video\" guide page." msgstr "Pokaż stronę z przewodnikiem \"Transmisja na żywo\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Podłącz drukarkę (LAN)" msgid "Please input the printer access code:" msgstr "Proszę podać kod dostępu do drukarki:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Możesz znaleźć go w sekcji \"Ustawienia > Sieć > Kod połączenia\"\n" -"na drukarce, jak pokazano na rysunku:" msgid "Invalid input." msgstr "Nieprawidłowe dane wejściowe." @@ -4548,7 +5119,7 @@ msgid "Open a new window" msgstr "Otwórz nowe okno" msgid "Application is closing" -msgstr "Aplikacja zamyka się" +msgstr "Kończenie działania programu" msgid "Closing Application while some presets are modified." msgstr "Zamykanie aplikacji podczas modyfikacji niektórych ustawień." @@ -4556,9 +5127,15 @@ msgstr "Zamykanie aplikacji podczas modyfikacji niektórych ustawień." msgid "Logging" msgstr "Logowanie" +msgid "Prepare" +msgstr "Przygotowanie" + msgid "Preview" msgstr "Podgląd" +msgid "Device" +msgstr "Urządzenie" + msgid "Multi-device" msgstr "Wiele urządzeń" @@ -4572,8 +5149,7 @@ msgid "No" msgstr "Nie" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "" -"zostanie zamknięta przed utworzeniem nowego modelu. Czy chcesz kontynuować?" +msgstr "zostanie zamknięta przed utworzeniem nowego modelu. Czy kontynuować?" msgid "Slice plate" msgstr "Potnij aktualną płytę" @@ -4581,12 +5157,12 @@ msgstr "Potnij aktualną płytę" msgid "Print plate" msgstr "Drukuj aktualną płytę" -msgid "Slice all" -msgstr "Potnij wszystkie płyty" - msgid "Export G-code file" msgstr "Eksportuj plik G-code" +msgid "Send" +msgstr "Wyślij" + msgid "Export plate sliced file" msgstr "Eksportuj plik pociętej płyty" @@ -4599,6 +5175,9 @@ msgstr "Drukuj wszystkie płyty" msgid "Send all" msgstr "Wyślij wszystko" +msgid "Send to Multi-device" +msgstr "Wyślij do wielu urządzeń" + msgid "Keyboard Shortcuts" msgstr "Skróty klawiszowe" @@ -4609,23 +5188,23 @@ msgid "Setup Wizard" msgstr "Kreator konfiguracji" msgid "Show Configuration Folder" -msgstr "Pokaż folder konfiguracji" +msgstr "Otwórz katalog konfiguracji" msgid "Show Tip of the Day" -msgstr "Pokaż Poradę Dnia" +msgstr "Wyświetl poradę dnia" msgid "Check for Update" msgstr "Sprawdź dostępność aktualizacji" msgid "Open Network Test" -msgstr "Otwórz Test Sieci" +msgstr "Otwórz test sieci" #, c-format, boost-format msgid "&About %s" msgstr "O &%s" msgid "Upload Models" -msgstr "Prześlij modele" +msgstr "Wyślij modele" msgid "Download Models" msgstr "Pobierz modele" @@ -4633,10 +5212,6 @@ msgstr "Pobierz modele" msgid "Default View" msgstr "Domyślny widok" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Góra" - msgid "Top View" msgstr "Widok z góry" @@ -4659,15 +5234,9 @@ msgstr "Tył" msgid "Rear View" msgstr "Widok z tyłu" -msgid "Left" -msgstr "Lewo" - msgid "Left View" msgstr "Widok z lewej" -msgid "Right" -msgstr "Prawo" - msgid "Right View" msgstr "Widok z prawej" @@ -4683,8 +5252,8 @@ msgstr "Rozpocznij nowy projekt" msgid "Open a project file" msgstr "Otwórz plik projektu" -msgid "Recent projects" -msgstr "Ostatnie projekty" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Zapisz projekt" @@ -4695,9 +5264,6 @@ msgstr "Zapisz bieżący projekt do pliku" msgid "Save Project as" msgstr "Zapisz projekt jako" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Zapisz bieżący projekt jako" @@ -4731,7 +5297,7 @@ msgstr "Eksportuj wszystkie obiekty jako pliki STL" msgid "Export Generic 3MF" msgstr "Eksportuj ogólny format 3MF" -msgid "Export 3mf file without using some 3mf-extensions" +msgid "Export 3MF file without using some 3mf-extensions" msgstr "Eksportuj plik 3MF bez użycia niektórych rozszerzeń 3MF" msgid "Export current sliced file" @@ -4746,8 +5312,11 @@ msgstr "Eksportuj plik G-code" msgid "Export current plate as G-code" msgstr "Eksportuj bieżący stół jako plik G-code" +msgid "Export toolpaths as OBJ" +msgstr "Eksportuje ścieżki narzędzi jako OBJ" + msgid "Export Preset Bundle" -msgstr "Eksport zestawu ustawień" +msgstr "Eksportuj zestaw ustawień" msgid "Export current configuration to files" msgstr "Eksportuj bieżącą konfigurację do plików" @@ -4756,7 +5325,7 @@ msgid "Export" msgstr "Eksportuj" msgid "Quit" -msgstr "Wyjdź" +msgstr "Zakończ" msgid "Undo" msgstr "Cofnij" @@ -4765,25 +5334,25 @@ msgid "Redo" msgstr "Ponów" msgid "Cut selection to clipboard" -msgstr "Kopiuj wybór do schowka" +msgstr "Przenosi zaznaczone obiekty do schowka" msgid "Copy" msgstr "Kopiuj" msgid "Copy selection to clipboard" -msgstr "Kopiuj zaznaczenie do schowka" +msgstr "Kopiuje zaznaczone obiekty do schowka" msgid "Paste" msgstr "Wklej" msgid "Paste clipboard" -msgstr "Wklej ze schowka" +msgstr "Wkleja obiekty ze schowka" msgid "Delete selected" msgstr "Usuń zaznaczone" msgid "Deletes the current selection" -msgstr "Usuwa bieżące zaznaczenie" +msgstr "Usuwa bieżące zaznaczone obiekty" msgid "Delete all" msgstr "Usuń wszystko" @@ -4792,10 +5361,16 @@ msgid "Deletes all objects" msgstr "Usuwa wszystkie obiekty" msgid "Clone selected" -msgstr "Klonuj zaznaczone" +msgstr "Powiel zaznaczone" msgid "Clone copies of selections" -msgstr "Tworzy kopie zaznaczeń" +msgstr "Tworzy kopie zaznaczonych obiektów" + +msgid "Duplicate Current Plate" +msgstr "Powiel bieżącą płytę" + +msgid "Duplicate the current plate" +msgstr "Tworzy kopię bieżącej płyty" msgid "Select all" msgstr "Zaznacz wszystko" @@ -4810,44 +5385,64 @@ msgid "Deselects all objects" msgstr "Odznacza wszystkie obiekty" msgid "Use Perspective View" -msgstr "Użyj widoku perspektywicznego" +msgstr "Używanie widoku perspektywicznego" msgid "Use Orthogonal View" -msgstr "Użyj widoku ortogonalnego" +msgstr "Używanie widoku ortogonalnego" + +msgid "Auto Perspective" +msgstr "Auto Perspektywa" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Automatycznie przełączaj między rzutem ortograficznym a perspektywą przy " +"przechodzeniu z widoku górnego/dolnego/bocznego" msgid "Show &G-code Window" -msgstr "Pokaż okno &G-code" +msgstr "Wyświetlanie okna &G-code" -msgid "Show g-code window in Previce scene" -msgstr "Pokaż okno G-code w scenie podglądu" +msgid "Show G-code window in Preview scene." +msgstr "Przełącza wyświetlanie okna G-code w scenie podglądu" msgid "Show 3D Navigator" -msgstr "Pokaż 3D Navigator" +msgstr "Wyświetlanie nawigatora 3D" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Pokaż 3D Navigator w widoku Przygotowanie i Podgląd" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "" +"Przełącza wyświetlanie nawidgatora 3D w scenie przygotowania i podglądu" msgid "Reset Window Layout" -msgstr "Zresetuj układ okna" +msgstr "Przywróć układ okna" msgid "Reset to default window layout" -msgstr "Przywróć domyślny układ okna" +msgstr "Przywraca domyślny układ okna" msgid "Show &Labels" -msgstr "Pokaż &etykiety" +msgstr "Wyświetlanie &etykiet" -msgid "Show object labels in 3D scene" -msgstr "Pokaż etykiety obiektów w scenie 3D" +msgid "Show object labels in 3D scene." +msgstr "Przełącza wyświetlanie etykiet obiektów w scenie 3D" msgid "Show &Overhang" -msgstr "Pokaż &nawisy" +msgstr "Wyświetlanie &nawisów" -msgid "Show object overhang highlight in 3D scene" -msgstr "Pokaż podświetlenie nawisów obiektów w scenie 3D" +msgid "Show object overhang highlight in 3D scene." +msgstr "Przełącza podświetlenie nawisów obiektów w scenie 3D" + +msgid "Show Selected Outline (beta)" +msgstr "Wyświetlanie zaznaczonych konturów (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Przełącza wyświetlanie konturu wokół zaznaczonego obiektu w scenie 3D" msgid "Preferences" msgstr "Preferencje" +msgid "View" +msgstr "Widok" + msgid "Help" msgstr "Pomoc" @@ -4866,6 +5461,18 @@ msgstr "Procedura 2" msgid "Flow rate test - Pass 2" msgstr "Test natężenia przepływu - Procedura 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (Zalecane)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO-kalibracja przepływu, krok 0.01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (wersja perfekcjonistyczna)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO-kalibracja przepływu, krok 0.005" + msgid "Flow rate" msgstr "Natężenie przepływu" @@ -4873,47 +5480,50 @@ msgid "Pressure advance" msgstr "Wzrost ciśnienia (PA)" msgid "Retraction test" -msgstr "Test Retrakcji" - -msgid "Orca Tolerance Test" -msgstr "Orca Test Tolerancji" +msgstr "Test retrakcji" msgid "Max flowrate" msgstr "Maksymalne natężenie przepływu" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "Test VFA" -msgid "More..." -msgstr "Więcej..." - msgid "Tutorial" msgstr "Samouczek" msgid "Calibration help" msgstr "Pomoc w kalibracji" -msgid "More calibrations" -msgstr "Więcej kalibracji" - msgid "&Open G-code" msgstr "&Otwórz plik G-code" msgid "Open a G-code file" -msgstr "Otwórz plik G-code" +msgstr "Otwiera plik G-code" msgid "Re&load from Disk" -msgstr "Ponownie załaduj z dysku" +msgstr "Wczytaj ponownie z dysku" msgid "Reload the plater from disk" -msgstr "Ponownie załaduj płytę z dysku" +msgstr "Ponownie wczytuje płytę z dysku" msgid "Export &Toolpaths as OBJ" msgstr "Eksportuj &ścieżki narzędzi jako OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Eksportuj ścieżki narzędzi jako OBJ" - msgid "Open &Slicer" msgstr "Otwórz &Slicer" @@ -4921,7 +5531,7 @@ msgid "Open Slicer" msgstr "Otwórz Slicer" msgid "&Quit" -msgstr "&Wyjście" +msgstr "Za&kończ" #, c-format, boost-format msgid "Quit %s" @@ -4931,21 +5541,24 @@ msgid "&File" msgstr "&Plik" msgid "&View" -msgstr "i Widok" +msgstr "&Widok" msgid "&Help" -msgstr "i Pomoc" +msgstr "Pomo&c" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Istnieje plik o tej samej nazwie: %s. Czy chcesz go nadpisać ?." +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Istnieje plik o tej samej nazwie: %s. Czy zastąpić go?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Istnieje plik o tej samej nazwie: %s. Czy chcesz go nadpisać ?." +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Istnieje plik o tej samej nazwie: %s. Czy zastąpić go?" msgid "Overwrite file" -msgstr "Nadpisz plik" +msgstr "Zastąp plik" + +msgid "Overwrite config" +msgstr "Zastąp konfigurację" msgid "Yes to All" msgstr "Tak dla wszystkich" @@ -5005,14 +5618,14 @@ msgid "Filament Settings" msgstr "Ustawienia filamentu" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Czy chcesz zsynchronizować swoje dane osobiste z Bambu Cloud? \n" -"Zawiera to następujące informacje:\n" +"Czy zsynchronizować dane osobiste z Bambu Cloud?\n" +"Uwzględnia to następujące informacje:\n" "1. Ustawienia procesu\n" "2. Ustawienia filamentu\n" "3. Ustawienia drukarki" @@ -5032,7 +5645,7 @@ msgstr "" msgid "The player is not loaded, please click \"play\" button to retry." msgstr "" -"Odtwarzacz nie został załadowany, proszę kliknąć przycisk \"Odtwórz\", aby " +"Odtwarzacz nie został wczytany, proszę kliknąć przycisk „Odtwórz”, aby " "spróbować ponownie." msgid "Please confirm if the printer is connected." @@ -5048,7 +5661,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "Kamera drukarki jest uszkodzona." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Wystąpił problem. Proszę zaktualizować oprogramowanie drukarki i spróbować " "ponownie." @@ -5060,10 +5673,10 @@ msgstr "" "drukarki." msgid "Please enter the IP of printer to connect." -msgstr "Proszę podać adres IP drukarki, aby nawiązać połączenie." +msgstr "Proszę wprowadzić adres IP drukarki, aby nawiązać połączenie." msgid "Initializing..." -msgstr "Inicjalizacja..." +msgstr "Inicjowanie..." msgid "Connection Failed. Please check the network and try again" msgstr "" @@ -5071,7 +5684,7 @@ msgstr "" "ponownie." msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Proszę sprawdzić połączenie sieciowe i spróbować ponownie. Jeśli problem " @@ -5080,8 +5693,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "Drukarka została wylogowana i nie można się z nią połączyć." -msgid "Stopped." -msgstr "Zatrzymano." +msgid "Video Stopped." +msgstr "Wideo zatrzymane." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Błąd połączenia LAN (Nie można uruchomić podglądu na żywo)" @@ -5090,8 +5703,8 @@ msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" -"Do wykonania tej operacji wymagane są narzędzia wirtualnej kamery!\n" -"Czy chcesz je zainstalować?" +"Do wykonania tej czynności wymagane są narzędzia wirtualnej kamery!\n" +"Czy zainstalować je?" msgid "Downloading Virtual Camera Tools" msgstr "Pobieranie narzędzi wirtualnej kamery" @@ -5103,11 +5716,11 @@ msgid "" msgstr "" "Inna wirtualna kamera jest już uruchomiona.\n" "Snapmaker Orca obsługuje tylko jedną wirtualną kamerę.\n" -"Czy chcesz zatrzymać tę wirtualną kamerę?" +"Czy zatrzymać tę wirtualną kamerę?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" -msgstr "Inicjalizacja wirtualnej kamery nie powiodła się (%s)!" +msgstr "Nie udało się zainicjować wirtualnej kamery (%s)!" msgid "Network unreachable" msgstr "Brak połączenia z siecią" @@ -5118,6 +5731,9 @@ msgstr "Informacja" msgid "Playing..." msgstr "Odtwarzanie..." +msgid "Loading..." +msgstr "Wczytywanie..." + msgid "Year" msgstr "Rok" @@ -5136,8 +5752,11 @@ msgstr "Grupuj pliki według miesiąca, najnowsze na początku." msgid "Show all files, recent first." msgstr "Pokaż wszystkie pliki, najnowsze na początku." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." -msgstr "Przełącz się na pliki timelapse." +msgstr "Przełącz na pliki filmów timelapse." msgid "Video" msgstr "Wideo" @@ -5145,8 +5764,9 @@ msgstr "Wideo" msgid "Switch to video files." msgstr "Przełącz się na pliki wideo." -msgid "Switch to 3mf model files." -msgstr "Przełącz się na pliki modeli 3mf." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Przełącz się na pliki modeli 3MF." msgid "Delete selected files from printer." msgstr "Usuń wybrane pliki z drukarki." @@ -5172,10 +5792,6 @@ msgstr "Przeładuj listę plików z drukarki." msgid "No printers." msgstr "Brak drukarek." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Błąd połączenia [%d]!" - msgid "Loading file list..." msgstr "Wczytywanie listy plików..." @@ -5185,53 +5801,36 @@ msgstr "Brak plików" msgid "Load failed" msgstr "Błąd ładowania" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Inicjalizacja nie powiodła się (Brak połączenia z urządzeniem)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Przeglądanie plików na karcie SD nie jest obsługiwane w bieżącym " -"oprogramowaniu. Proszę zaktualizować oprogramowanie drukarki." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"Inicjalizacja nie powiodła się (brak dostępu do pamięci, włóż kartę SD)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Połączenie LAN nieudane (Nie udało się wyświetlić zawartości karty SD)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -"Przeglądanie plików na karcie SD nie jest obsługiwane w trybie tylko LAN." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inicjalizacja nie powiodła się (%s)!" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" "You are going to delete %u files from printer. Are you sure to continue?" -msgstr[0] "" -"Zamierzasz usunąć %u plik z drukarki. Czy na pewno chcesz kontynuować?" -msgstr[1] "" -"Zamierzasz usunąć %u pliki z drukarki. Czy na pewno chcesz kontynuować?" -msgstr[2] "" -"Zamierzasz usunąć %u plików z drukarki. Czy na pewno chcesz kontynuować?" +msgstr[0] "Zostanie usunięty %u plik z drukarki. Czy na pewno kontynuować?" +msgstr[1] "Zostaną usunięte %u pliki z drukarki. Czy na pewno kontynuować?" +msgstr[2] "Zostanie usuniętych %u plików z drukarki. Czy na pewno kontynuować?" msgid "Delete files" msgstr "Usuń pliki" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "Czy chcesz usunąć plik '%s' z drukarki?" +msgstr "Czy usunąć plik „%s” z drukarki?" msgid "Delete file" msgstr "Usuń plik" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Pobieranie informacji o modelach..." msgid "Failed to fetch model information from printer." @@ -5241,15 +5840,15 @@ msgid "Failed to parse model information." msgstr "Nie udało się przeanalizować informacji o modelu." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "Plik .gcode.3mf nie zawiera danych G-code. Proszę poddać go obróbce w " "programie Snapmaker Orca i wyeksportować jako nowy plik .gcode.3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." -msgstr "Plik '%s' został utracony! Proszę pobrać go ponownie." +msgstr "Plik „%s” został utracony! Proszę pobrać go ponownie." #, c-format, boost-format msgid "" @@ -5275,6 +5874,9 @@ msgstr "Pobieranie zakończone" msgid "Downloading %d%%..." msgstr "Pobieranie %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5282,6 +5884,9 @@ msgstr "" "Ponowne łączenie z drukarką, operacja nie może być teraz zakończona, spróbuj " "ponownie później." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "Plik nie istnieje." @@ -5291,13 +5896,47 @@ msgstr "Błąd sumy kontrolnej pliku. Proszę spróbować ponownie." msgid "Not supported on the current printer version." msgstr "Nieobsługiwane w obecnej wersji drukarki." -msgid "Storage unavailable, insert SD card." -msgstr "Pamięć niedostępna, wstaw kartę SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Kod błędu: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Prędkość:" @@ -5337,11 +5976,84 @@ msgstr "Odwróć oś pochylenia (Pitch)" msgid "Invert Roll axis" msgstr "Odwróć oś obrotu (Roll)" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Szukaj" + +msgid "My Device" +msgstr "Moje urządzenie" + +msgid "Other Device" +msgstr "Inne urządzenie" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Wprowadź kod dostępu" + +msgid "Can't find my devices?" +msgstr "Nie możesz znaleźć urządzeń?" + +msgid "Log out successful." +msgstr "Wylogowanie powiodło się." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Zajęty" + +msgid "Modifying the device name" +msgstr "Modyfikacja nazwy urządzenia" + +msgid "Name is invalid;" +msgstr "Nazwa jest nieprawidłowa;" + +msgid "illegal characters:" +msgstr "niedozwolone znaki:" + +msgid "illegal suffix:" +msgstr "niedozwolony sufiks:" + +msgid "The name is not allowed to be empty." +msgstr "Nazwa nie może być pusta." + +msgid "The name is not allowed to start with space character." +msgstr "Nazwa nie może zaczynać się od znaku spacji." + +msgid "The name is not allowed to end with space character." +msgstr "Nazwa nie może kończyć się na znaku spacji." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Powiąż za pomocą kodu PIN" + +msgid "Bind with Access Code" +msgstr "Powiąż za pomocą kodu dostępu" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Postęp druku" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Zatrzymaj" msgid "Layer: N/A" msgstr "Warstwa: N/D" @@ -5370,8 +6082,8 @@ msgstr "Oceń" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "Karta SD" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Ustawienia kamery" @@ -5388,35 +6100,41 @@ msgstr "Typ dyszy" msgid "Print Options" msgstr "Opcje drukowania" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "LED" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Komora" - msgid "Bed" msgstr "Stół" msgid "Debug Info" msgstr "Informacje debugowania" -msgid "No SD Card" -msgstr "Brak karty SD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "Niezwykła karta SD" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Anuluj drukowanie" -msgid "Are you sure you want to cancel this print?" -msgstr "Czy na pewno chcesz anulować to drukowanie?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Drukarka jest zajęta innym zadaniem drukowania." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Pobieranie..." @@ -5437,17 +6155,15 @@ msgid "Layer: %d/%d" msgstr "Warstwa: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" "Przed załadowaniem lub rozładunkiem filamentu, podgrzej dyszę do temperatury " "powyżej 170 stopni." -msgid "Still unload" -msgstr "Wycofaj" - -msgid "Still load" -msgstr "Podaj" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Przed kalibracją wybierz gniazdo AMS" @@ -5474,8 +6190,19 @@ msgstr "Sport" msgid "Ludicrous" msgstr "Szalony" -msgid "Can't start this without SD card." -msgstr "Nie można rozpocząć bez karty SD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Oceń profil druku" @@ -5498,13 +6225,10 @@ msgstr "Prześlij" msgid "Please click on the star first." msgstr "Najpierw kliknij gwiazdkę." -msgid "InFo" -msgstr "Informacje" - msgid "Get oss config failed." msgstr "Pobranie konfiguracji OSS nie powiodło się." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Prześlij obrazy" msgid "Number of images successfully uploaded" @@ -5519,7 +6243,7 @@ msgstr " błąd przesyłania konfiguracji\n" msgid " No corresponding storage bucket\n" msgstr " Brak odpowiadającego pojemnika na dane\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " nie można otworzyć\n" msgid "" @@ -5527,24 +6251,26 @@ msgid "" "want to ignore them?\n" "\n" msgstr "" -"Podczas procesu przesyłania obrazów wystąpiły następujące problemy. Czy " -"chcesz je zignorować?\n" +"Podczas wysyłania obrazów wystąpiły następujące problemy. Czy zignorować " +"je?\n" "\n" msgid "info" msgstr "info" msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "Synchronizowanie wyników drukowania. Spróbuj ponownie za kilka sekund." +msgstr "" +"Synchronizowanie wyników drukowania. Proszę spróbować ponownie za kilka " +"sekund." msgid "Upload failed\n" -msgstr "Przesyłanie nie powiodło się\n" +msgstr "Nie udało się przesłać\n" msgid "obtaining instance_id failed\n" msgstr "nie udało się uzyskać instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5559,15 +6285,15 @@ msgstr "komunikat o błędzie: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" -"Czy chcesz przenieść się na stronę internetową w celu oceny?" +"Czy przenieść na stronę internetową w celu oceny?" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Niektóre z twoich zdjęć nie zostały przesłane. Chcesz przekierować się na " "stronę internetową w celu oceny?" @@ -5577,7 +6303,7 @@ msgstr "Możesz wybrać maksymalnie 16 zdjęć." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Aby wystawić pozytywną ocenę (4 lub 5 gwiazdek), wymagana \n" "jest co najmniej jedna udana rejestracja tego profilu druku." @@ -5585,12 +6311,22 @@ msgstr "" msgid "Status" msgstr "Status" +msgctxt "Firmware" msgid "Update" -msgstr "Aktualizacja" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Nie pokazuj ponownie" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s błąd" @@ -5618,11 +6354,12 @@ msgstr "%s informacje" msgid "Skip" msgstr "Pomiń" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "Nowa wersja 3mf" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" "Wersja pliku 3MF jest w wersji Beta i jest nowsza niż obecna wersja " @@ -5634,25 +6371,51 @@ msgstr "Jeśli chciałbyś wypróbować Snapmaker Orca Beta, możesz kliknąć t msgid "Download Beta Version" msgstr "Pobierz wersje Beta" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "Wersja pliku 3MF jest nowsza niż obecna w wersji Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" "Zaktualizowanie Snapmaker Orca może umożliwić korzystanie ze wszystkich funkcji " "pliku 3MF." msgid "Current Version: " -msgstr "Obecna wersja:" +msgstr "Obecna wersja: " msgid "Latest Version: " -msgstr "Najnowsza wersja:" +msgstr "Najnowsza wersja: " + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" msgstr "Nie teraz" +msgid "Server Exception" +msgstr "Wyjątek serwera" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Serwer nie odpowieda. Kliknij poniższy link, aby sprawdzić status serwera." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"W przypadku awarii serwera, możesz tymczasowo korzystać z druku offline lub " +"druku w sieci lokalnej." + +msgid "How to use LAN only mode" +msgstr "Jak korzystać z trybu tylko LAN" + +msgid "Don't show this dialog again" +msgstr "Nie pokazuj tego okna dialogowego ponownie" + msgid "3D Mouse disconnected." -msgstr "3D Mouse niepodłączona." +msgstr "Mysz 3D niepodłączona." msgid "Configuration can update now." msgstr "Konfiguracja może teraz zostać zaktualizowana." @@ -5715,10 +6478,17 @@ msgstr[2] "%1$d obiektów jest pomalowanych kolorem." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "%1$d obiekt został załadowany jako część obiektu wyciętego." -msgstr[1] "%1$d obiekty zostały załadowane jako części obiektu wyciętego" -msgstr[2] "%1$d obiektów zostało załadowanych jako części obiektu wyciętego" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d obiekt został wczytany jako część obiektu wyciętego." +msgstr[1] "%1$d obiekty zostały wczytane jako części obiektu wyciętego." +msgstr[2] "%1$d obiektów zostało wczytanych jako części obiektu wyciętego." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" +msgstr[2] "" msgid "ERROR" msgstr "BŁĄD" @@ -5741,7 +6511,7 @@ msgstr "Błąd:" msgid "Warning:" msgstr "Ostrzeżenie:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Eksport zakończony sukcesem." msgid "Model file downloaded." @@ -5759,11 +6529,11 @@ msgstr " Kliknij tutaj, aby zainstalować." msgid "WARNING:" msgstr "OSTRZEŻENIE:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Twój model wymaga podpór! Włącz generowanie podpór." -msgid "Gcode path overlap" -msgstr "Nakładanie się ścieżek Gcode" +msgid "G-code path overlap" +msgstr "Nakładanie się ścieżek G-code" msgid "Support painting" msgstr "Namaluj podpory" @@ -5812,12 +6582,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Dół" -msgid "Enable AI monitoring of printing" -msgstr "Włącz monitorowanie drukowania przez sztuczną inteligencję" - -msgid "Sensitivity of pausing is" -msgstr "Czułość pauzy wynosi" - msgid "Enable detection of build plate position" msgstr "Włącz wykrywanie położenia płyty roboczej" @@ -5828,21 +6592,78 @@ msgstr "" "Jeśli punkt kontrolny lokalizacji płyty roboczej (kod QR), zostanie wykryty " "w niewłaściwym miejscu, drukowanie zostanie wstrzymane." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Włącz monitorowanie drukowania przez sztuczną inteligencję" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Wykrywanie „zalepienia” się dyszy" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Inspekcja pierwszej warstwy" msgid "Auto-recovery from step loss" msgstr "Automatyczne odzyskiwanie po utracie kroków" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Zezwól na dźwiękowe powiadomienia" msgid "Filament Tangle Detect" msgstr "Wykrywanie splątanych filamentów" -msgid "Nozzle Clumping Detection" -msgstr "Wykrywanie \"zalepienia\" się dyszy" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Sprawdź, czy dysza nie została zatkana filamentem lub innym obcym " @@ -5851,15 +6672,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Rodzaj dyszy" -msgid "Stainless Steel" -msgstr "Stal nierdzewna" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Stal hartowana" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Stal nierdzewna" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Globalne" @@ -5894,6 +6729,9 @@ msgstr "Odblokuj bieżący stół" msgid "Lock current plate" msgstr "Zablokuj bieżący stół" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "Edytuj aktualną nazwę płyty" @@ -5903,6 +6741,31 @@ msgstr "Umieść płytę jako pierwszą" msgid "Customize current plate" msgstr "Dostosuj bieżący stół" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " płyty %1%:" @@ -5931,14 +6794,67 @@ msgstr "Szacunkowy czas" msgid "Filament changes" msgstr "Zmiany filamentu" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Kliknij, aby edytować profil" msgid "Connection" msgstr "Połączenie" -msgid "Bed type" -msgstr "Typ płyty" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Objętość płukania" @@ -5961,65 +6877,47 @@ msgstr "Szukaj stołu, obiektu i części." msgid "Pellets" msgstr "Granulat" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Brak odczytu filamentów w AMS. Aby wyświetlić informacje AMS, wybierz " -"drukarkę na stronie Urządzenia." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Brak kompatybilnych filamentów, synchronizacja nie została wykonana." msgid "Sync filaments with AMS" msgstr "Synchronizuj filamenty z AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Synchronizacja filamentów z AMS usunie wszystkie obecnie wybrane profile " -"filamentu i koloru. Czy chcesz kontynuować?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Synchronizacja została już wykonana. Chcesz synchronizować tylko zmiany czy " -"zaktualizować wszystko ponownie?" - -msgid "Sync" -msgstr "Tylko zmiany" - -msgid "Resync" -msgstr "Zaktualizuj wszystko" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Brak kompatybilnych filamentów, synchronizacja nie została wykonana." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Istnieją nieznane filamenty przypisane do ogólnych profili. Proszę " -"zaktualizować Snapmaker Orca lub zrestartować go, aby sprawdzić dostępność " -"aktualizacji profili systemowych." #, boost-format msgid "Do you want to save changes to \"%1%\"?" -msgstr "Czy chcesz zapisać zmiany w \"%1%\"?" +msgstr "Czy zapisać zmiany w „%1%”?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Pomyślnie odmontowano. Urządzenie %s(%s) może teraz być bezpiecznie usunięte " "z komputera." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Nie można wypiąć urządzenia %s(%s)." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "Wykryto poprzedni niezapisany projekt. Czy chcesz go przywrócić?" +msgstr "Wykryto poprzedni, niezapisany projekt. Czy przywrócić go?" msgid "Restore" msgstr "Przywróć" @@ -6049,29 +6947,49 @@ msgstr "" "Włączenie tradycyjnego timelapsu może powodować niedoskonałości powierzchni. " "Zaleca się zmianę trybu na płynny." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Rozwiń pasek boczny" msgid "Collapse sidebar" msgstr "Zwiń pasek boczny" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Wczytywanie pliku: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" "Plik 3MF nie jest obsługiwany przez Snapmaker Orca, wczytuj tylko dane geometrii." -msgid "Load 3mf" +msgid "Load 3MF" msgstr "Wczytaj 3MF" +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"Wersja 3mf %s jest nowsza niż wersja %s %s, znaleziono następujące " +"Wersja 3MF %s jest nowsza niż wersja %s %s, znaleziono następujące " "nierozpoznane klucze:" msgid "You'd better upgrade your software.\n" @@ -6079,36 +6997,46 @@ msgstr "Lepiej zaktualizuj swoje oprogramowanie.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Wersja 3mf %s jest nowsza niż wersja %s %s, sugeruje się aktualizację " +"Wersja 3MF %s jest nowsza niż wersja %s %s, sugeruje się aktualizację " "oprogramowania." -msgid "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"Plik 3MF jest generowany przez starą wersję Snapmaker Orca, wczytuj tylko " +"dane geometrii." + + +msgid "Invalid values found in the 3MF:" msgstr "Znaleziono nieprawidłowe wartości w pliku 3MF:" msgid "Please correct them in the param tabs" msgstr "Proszę poprawić je na kartach parametrów" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "Plik 3MF ma zmodyfikowane G-code w profilach filamentu lub drukarki:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Proszę potwierdzić, że te zmodyfikowane G-code są bezpieczne, aby zapobiec " "ewentualnym uszkodzeniom maszyny!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "Zmodyfikowane G-codes" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "Plik 3MF ma już dostosowane profile filamentu lub drukarki:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Proszę potwierdź, że G-code w tych profilach jest bezpieczny, aby zapobiec " @@ -6117,19 +7045,20 @@ msgstr "" msgid "Customized Preset" msgstr "Dostosowany profil" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Nazwa komponentów w pliku step nie jest w formacie UTF8!" msgid "The name may show garbage characters!" msgstr "Nazwa może zawierać nieczytelne znaki!" msgid "Remember my choice." -msgstr "Zapamiętaj moją decyzję." +msgstr "Zapamiętanie decyzji" #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "" -"Nie udało się wczytać pliku \"%1%\". Znaleziono nieprawidłową konfigurację." +"Nie udało się wczytać pliku „%1%”. Znaleziono nieprawidłową konfigurację." msgid "Objects with zero volume removed" msgstr "Usunięto obiekty o zerowym wolumenie" @@ -6142,11 +7071,12 @@ msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" -"Obiekt z pliku %s jest zbyt mały i może być w metrach lub calach.\n" -" Czy chcesz przeskalować go na milimetry?" +"Obiekt z pliku %s jest zbyt mały i możliwe, że jest określony w metrach lub " +"calach.\n" +" Czy przeskalować na milimetry?" msgid "Object too small" -msgstr "Obiekt jest zbyt mały" +msgstr "Zbyt mały obiekt" msgid "" "This file contains several objects positioned at multiple heights.\n" @@ -6154,7 +7084,7 @@ msgid "" "the file be loaded as a single object having multiple parts?" msgstr "" "Ten plik zawiera kilka obiektów umieszczonych na różnych wysokościach.\n" -"Czy chcesz potraktować go jako jeden model zawierający kilka części, \n" +"Czy potraktować go jako jeden model zawierający kilka części, \n" "zamiast wielu modeli?" msgid "Multi-part object detected" @@ -6162,24 +7092,33 @@ msgstr "Wykryto obiekt składający się z wielu części" msgid "Load these files as a single object with multiple parts?\n" msgstr "" -"Czy chcesz wczytać te pliki jako pojedynczy obiekt składający się z wielu " -"części?\n" +"Czy wczytać te pliki jako pojedynczy obiekt składający się z wielu części?\n" msgid "Object with multiple parts was detected" msgstr "Wykryto obiekt składający się z wielu części" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Plik nie zawiera żadnych danych geometrycznych." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" -"Importowany model przekracza wymiary przestrzeni roboczej. Czy chcesz go " -"przeskalowanć do odpowiednich rozmiarów?" +"Importowany model przekracza wymiary przestrzeni roboczej. Czy przeskalować " +"go do odpowiednich rozmiarów?" msgid "Object too large" -msgstr "Obiekt jest zbyt duży" +msgstr "Zbyt duży obiekt" msgid "Export STL file:" msgstr "Eksportuj plik STL:" @@ -6199,7 +7138,7 @@ msgid "" "Do you want to replace it?" msgstr "" "Plik %s już istnieje\n" -"Czy chcesz go zastąpić?" +"Czy zastąpić go?" msgid "Confirm Save As" msgstr "Potwierdź Zapisz jako" @@ -6220,7 +7159,7 @@ msgid "The selected object couldn't be split." msgstr "Nie można podzielić wybranego obiektu." msgid "Another export job is running." -msgstr "Trwa inna praca eksportu." +msgstr "Trwa inne eksportowanie." msgid "Unable to replace with more than one volume" msgstr "Nie można zamienić na więcej niż jeden kształt" @@ -6237,6 +7176,34 @@ msgstr "Wybierz nowy plik" msgid "File for the replace wasn't selected" msgstr "Plik do zastąpienia nie został wybrany" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Proszę wybrać plik" @@ -6265,11 +7232,11 @@ msgid "Invalid data" msgstr "Nieprawidłowe dane" msgid "Slicing Canceled" -msgstr "Cięcie anulowane" +msgstr "Anulowano cięcie" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Krojenie płyty %d" +msgstr "Cięcie płyty %d" msgid "Please resolve the slicing errors and publish again." msgstr "Rozwiąż błędy w cięciu i opublikuj ponownie." @@ -6282,14 +7249,25 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Tryb tylko podglądu:\n" -"Wczytany plik zawiera tylko G-code, nie można wejść na stronę Przygotuj" +"wczytany plik zawiera tylko G-code, nie można wyświetlić karty przygotowania." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "" -"Możesz zachować zmodyfikowane profile w nowym projekcie lub je odrzucić" +"Można zachować zmodyfikowane profile w nowym projekcie lub je odrzucić." msgid "Creating a new project" msgstr "Tworzenie nowego projektu" @@ -6312,17 +7290,17 @@ msgstr "Zapisz projekt" msgid "Importing Model" msgstr "Importowanie modelu" -msgid "prepare 3mf file..." -msgstr "przygotuj plik 3mf..." +msgid "prepare 3MF file..." +msgstr "przygotuj plik 3MF..." msgid "Download failed, unknown file format." -msgstr "Pobieranie nie powiodło się, nieznany format pliku." +msgstr "Nie udało się pobrać. Nieznany format pliku." -msgid "downloading project ..." +msgid "downloading project..." msgstr "pobieranie projektu ..." msgid "Download failed, File size exception." -msgstr "Pobieranie nie powiodło się, wyjątek - rozmiar pliku." +msgstr "Nie udało się pobrać. Wyjątek rozmiaru pliku." #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6335,14 +7313,26 @@ msgstr "" "Importowanie do Snapmaker Orca nie powiodło się. Proszę pobrać plik i " "zaimportować go ręcznie." +msgid "INFO:" +msgstr "INFO:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "Brak wartości przyspieszenia do kalibracji. Użyj wartości domyślnej." + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Prędkość nie została określona do kalibracji. Użyj domyślnej prędkości " +"optymalnej." + msgid "Import SLA archive" msgstr "Importuj archiwum SLA" msgid "The selected file" msgstr "Wybrany plik" -msgid "does not contain valid gcode." -msgstr "nie zawiera prawidłowego gcode." +msgid "does not contain valid G-code." +msgstr "nie zawiera prawidłowego G-code." msgid "Error occurs while loading G-code file" msgstr "Wystąpił błąd podczas wczytywania pliku z G-code" @@ -6376,23 +7366,23 @@ msgid "Import geometry only" msgstr "Importuj tylko geometrię" msgid "Only one G-code file can be opened at the same time." -msgstr "Można otworzyć tylko jeden plik G-code na raz." +msgstr "Można otworzyć tylko jeden plik G-code w tym samym czasie." msgid "G-code loading" msgstr "Wczytywanie pliku G-code" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Pliki G-code nie mogą być wczytywane razem z modelami!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Nie można dodawać modeli w trybie podglądu!" msgid "All objects will be removed, continue?" -msgstr "Wszystkie obiekty zostaną usunięte, kontynuować?" +msgstr "Wszystkie obiekty zostaną usunięte. Czy kontynuować?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" -"Aktualny projekt ma niezapisane zmiany, czy zapisać go przed kontynuacją?" +"Aktualny projekt ma niezapisane zmiany. Czy zapisać je przed kontynuowaniem?" msgid "Number of copies:" msgstr "Liczba kopii:" @@ -6422,6 +7412,12 @@ msgid "" msgstr "" "Plik %s został wysłany do pamięci drukarki i można go obejrzeć na urządzeniu." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -6431,19 +7427,19 @@ msgstr "" #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Przyczyna: część \"%1%\" jest pusta." +msgstr "Przyczyna: część „%1%” jest pusta." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Przyczyna: część \"%1%\" nie ogranicza objętości." +msgstr "Przyczyna: część „%1%” nie ogranicza objętości." #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Przyczyna: część \"%1%\" wprowadzona automatycznie." +msgstr "Przyczyna: część „%1%” wprowadzona automatycznie." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Przyczyna: \"%1%\" i inna część nie mają wspólnego przecięcia." +msgstr "Przyczyna: „%1%” i inna część nie mają wspólnego przecięcia." msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " @@ -6452,19 +7448,6 @@ msgstr "" "Nie można wykonywać operacji boolowskich na siatkach modeli. Eksportowane " "będą tylko części dodatnie." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Czy na pewno chcesz przechowywać oryginalne pliki SVG wraz z ich lokalnymi " -"ścieżkami w pliku 3MF?\n" -"Jeśli wybierzesz 'NIE', wszystkie pliki SVG w projekcie przestaną być " -"edytowalne." - -msgid "Private protection" -msgstr "Ochrona prywatności" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" "Czy drukarka jest gotowa? Czy arkusz drukujący jest na miejscu, pusty i " @@ -6473,6 +7456,9 @@ msgstr "" msgid "Upload and Print" msgstr "Prześlij i drukuj" +msgid "Abnormal print file data. Please slice again" +msgstr "Nieprawidłowe dane pliku druku. Proszę ponownie przetnij" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6493,8 +7479,33 @@ msgstr "Niestandardowe podpory i kolorowanie zostały usunięte przed naprawą." msgid "Optimize Rotation" msgstr "Optymalizuj obrót" -msgid "Invalid number" -msgstr "Nieprawidłowa liczba" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Ustawienia stołu" @@ -6535,9 +7546,6 @@ msgstr "Objętość: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Trójkąty: %1%\n" -msgid "Tips:" -msgstr "Wskazówki:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6548,19 +7556,45 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Płyta% d:%s Nie zaleca się używania do druku filamentu %s(%s). Jeśli nadal " +"Płyta %d: %s Nie zaleca się używania do druku filamentu %s(%s). Jeśli nadal " "chcesz wydrukować ten filament, ustaw temperaturę stołu dla tego filamentu " "na większą niż zero." +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + msgid "Switching the language requires application restart.\n" -msgstr "Zmiana języka wymaga ponownego uruchomienia aplikacji.\n" +msgstr "Zmiana języka wymaga ponownego uruchomienia programu.\n" msgid "Do you want to continue?" -msgstr "Czy chcesz kontynuować?" +msgstr "Czy kontynuować?" msgid "Language selection" msgstr "Wybór języka" @@ -6573,39 +7607,6 @@ msgstr "" msgid "Changing application language" msgstr "Zmiana języka aplikacji" -msgid "Changing the region will log out your account.\n" -msgstr "Zmiana regionu spowoduje wylogowanie z Twojego konta.\n" - -msgid "Region selection" -msgstr "Wybór regionu" - -msgid "Second" -msgstr "Sekund" - -msgid "Browse" -msgstr "Przeglądaj" - -msgid "Choose Download Directory" -msgstr "Wybierz Katalog Pobierania" - -msgid "Associate" -msgstr "Powiąż" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "aktualne skojarzenie z Snapmaker Orca, aby Orca mogła otwierać modele z" - -msgid "Current Association: " -msgstr "Aktualnie powiązano: " - -msgid "Current Instance" -msgstr "Aktualna instancja" - -msgid "Current Instance Path: " -msgstr "Aktualna ścieżka instancji: " - -msgid "General Settings" -msgstr "Ustawienia Ogólne" - msgid "Asia-Pacific" msgstr "Azja i Pacyfik" @@ -6621,37 +7622,80 @@ msgstr "Ameryka Północna" msgid "Others" msgstr "Inne" -msgid "Login Region" -msgstr "Region Logowania" +msgid "Changing the region will log out your account.\n" +msgstr "Zmiana regionu spowoduje wylogowanie z aktualnego konta.\n" -msgid "Stealth Mode" -msgstr "Tryb \"Niewidzialny\"" +msgid "Region selection" +msgstr "Wybór regionu" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Określa okres kopii zapasowej w sekundach." + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Zatrzymuje to transmisję danych do chmury Bambu. Użytkownicy, którzy nie " -"korzystają z maszyn BBL lub używają tylko trybu LAN, mogą bezpiecznie " -"włączyć tę funkcję." -msgid "Enable network plugin" -msgstr "Włącz wtyczkę sieciową (BambuLab)" +msgid "Browse" +msgstr "Przeglądaj" -msgid "Check for stable updates only" -msgstr "Sprawdzaj aktualizacje (tylko wersje stabilne)" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Wybierz katalog pobierania" + +msgid "Associate" +msgstr "Powiązanie" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "aktualnie skojarzone z Snapmaker Orca, aby Orca mogła otwierać modele z" + +msgid "Current Association: " +msgstr "Aktualnie powiązano: " + +msgid "Current Instance" +msgstr "Aktualna instancja" + +msgid "Current Instance Path: " +msgstr "Aktualna ścieżka instancji: " + +msgid "General" +msgstr "Ogólne" msgid "Metric" -msgstr "Metryczny" +msgstr "Metryczne" msgid "Imperial" -msgstr "Imperialny" +msgstr "Imperialne" msgid "Units" msgstr "Jednostki" +msgid "Home" +msgstr "Strona główna" + +msgid "Default page" +msgstr "Domyślna strona" + +msgid "Set the page opened on startup." +msgstr "Ustala stronę otwieraną po uruchomieniu programu." + +msgid "Enable dark mode" +msgstr "Włączenie trybu ciemnego" + msgid "Allow only one Snapmaker Orca instance" -msgstr "Zezwól tylko na jedną instancję programu Snapmaker Orca" +msgstr "Zezwolenie na tylko jedną instancję programu" msgid "" "On OSX there is always only one instance of app running by default. However " @@ -6671,14 +7715,112 @@ msgstr "" "tego samego Snapmaker Orca jest już uruchomiona, ta instancja zostanie ponownie " "aktywowana." -msgid "Home" -msgstr "Strona główna" +msgid "Show splash screen" +msgstr "Wyświetlanie ekranu powitalnego" -msgid "Default Page" -msgstr "Domyślna Strona" +msgid "Show the splash screen during startup." +msgstr "Wyświetla ekran powitalny podczas uruchamiania." -msgid "Set the page opened on startup." -msgstr "Ustaw stronę otwieraną przy uruchomieniu." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Wczytanie wszystkiego" + +msgid "Ask When Relevant" +msgstr "Pytanie w razie potrzeby" + +msgid "Always Ask" +msgstr "Pytanie zawsze" + +msgid "Load Geometry Only" +msgstr "Wczytanie tylko geometrii" + +msgid "Load behaviour" +msgstr "Zachowanie przy wczytywaniu" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"Określa czy ustawienia drukarki/filamentu/procesu mają być wczytywane " +"podczas otwierania pliku .3mf" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Brak ostrzeżeń przy wczytywaniu plików 3MF z zmodyfikowanymi G-code" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Automatyczne tworzenie kopii zapasowej" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Wykonuje okresowe kopie zapasowe projektu w celu przywracania po " +"sporadycznych awariach." + +msgid "Preset" +msgstr "Profil" + +msgid "Remember printer configuration" +msgstr "Pamiętanie konfiguracji drukarki" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Automatycznie zapamiętuje i przełącza konfigurację filamentu/procesu dla " +"każdej drukarki." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Obsługiwanie wielu urządzeń" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Umożliwia wysyłanie zadania do wielu urządzeń jednocześnie i zarządzanie " +"nimi." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Wszystkie" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Automatyczne rozmieszczanie na płycie po powieleniu" msgid "Touchpad" msgstr "Panel dotykowy" @@ -6691,12 +7833,18 @@ msgid "" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" -"Wybierz styl nawigacji kamery.\n" -"Domyślnie: LPM+ruch dla obrotu, PPM/ŚPM+ruch dla przesuwania.\n" -"Touchpad: Alt+ruch dla obrotu, Shift+ruch dla przesuwania." +"Wybiera styl nawigowania kamerą.\n" +"Domyślnie: LPM+ruch dla obracania, PPM/ŚPM+ruch dla przesuwania.\n" +"Panel dotykowy: Alt+ruch dla obracania, Shift+ruch dla przesuwania." + +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" msgid "Zoom to mouse position" -msgstr "Powiększ do pozycji myszki" +msgstr "Przybliżanie do pozycji myszki" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " @@ -6705,171 +7853,164 @@ msgstr "" "Powiększ do pozycji wskaźnika myszy w widoku 3D, zamiast do środka okna 2D." msgid "Use free camera" -msgstr "Użyj wolnego widoku z kamery" +msgstr "Używanie wolnego widoku kamery" msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "Przełącza pomiędzy wolnym a ograniczonym widokiem kamery." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Zamień przyciski przesuwania i obracania myszy" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." msgstr "" -"Jeśli włączone, to używany będzie wolny widok. Jeśli wyłączone, to widok " -"będzie ograniczony." +"Jeśli włączone, zamienia funkcje przesuwania i obracania lewym i prawym " +"przyciskiem myszy." msgid "Reverse mouse zoom" msgstr "Odwrócone przybliżanie myszką" msgid "If enabled, reverses the direction of zoom with mouse wheel." -msgstr "Jeśli włączone, kierunek kółka myszy zostanie odwrócony." +msgstr "Odwraca kierunek przybliżania kółkiem myszy." -msgid "Show splash screen" -msgstr "Pokaż ekran powitalny" - -msgid "Show the splash screen during startup." -msgstr "Pokaż ekran powitalny podczas uruchamiania." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Pokaż powiadomienie „Porada dnia” po uruchomieniu" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Jeśli włączone, przy uruchamianiu wyświetlane są przydatne wskazówki." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Clear my choice on..." msgstr "" -"Objętości płukania: Automatyczne obliczanie za każdym razem, gdy zmieni się " -"kolor" -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Unsaved projects" msgstr "" -"Jeśli włączone, automatyczne obliczanie za każdym razem, gdy zmieni się kolor" - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "" -"Objętości płukania: Automatycznie obliczaj za każdym razem, gdy zmieniany " -"jest filament" - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" -"Jeśli ta opcja jest włączona, automatycznie obliczaj za każdym razem, gdy " -"zmieniany jest filament." - -msgid "Remember printer configuration" -msgstr "Zapamiętaj konfigurację drukarki" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" -"Jeśli ta opcja jest włączona, Orca będzie automatycznie zapamiętywać i " -"przełączać konfigurację filamentu/procesu dla każdej drukarki." - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" -"Obsługa wielu urządzeń (zacznie być aktywna po ponownym uruchomieniu Orca)" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"Dzięki tej opcji możesz wysyłać zadania do wielu urządzeń jednocześnie i " -"zarządzać nimi." - -msgid "Network" -msgstr "Sieć" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Automatyczna synchronizacja profili użytkownika (Drukarka/Filament/Proces)" - -msgid "User Sync" -msgstr "Synchronizacja użytkownika" - -msgid "Update built-in Presets automatically." -msgstr "Automatyczna aktualizacja wbudowanych profili" - -msgid "System Sync" -msgstr "Synchronizacja systemu" - -msgid "Clear my choice on the unsaved presets." -msgstr "Wyczyść moje wybory w niezapisanych profilach." - -msgid "Associate files to Snapmaker Orca" -msgstr "Skojarz pliki z Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Skojarz pliki .3mf z Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "" -"Jeśli włączone, ustawia Snapmaker Orca jako domyślną aplikację do otwierania " -"plików .3mf" - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Skojarz pliki .stl z Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "" -"Jeśli włączone, ustawia Snapmaker Orca jako domyślną aplikację do otwierania " -"plików .stl" - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Skojarz pliki .step/.stp z Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "" -"Jeśli włączone, ustawia Snapmaker Orca jako domyślną aplikację do otwierania " -"plików .step" - -msgid "Associate web links to Snapmaker Orca" -msgstr "Powiąż linki z Snapmaker Orca" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "Powiąż URL z Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Maksymalna liczba ostatnich projektów" - -msgid "Maximum count of recent projects" -msgstr "Maksymalna ilość ostatnich projektów" msgid "Clear my choice on the unsaved projects." -msgstr "Wyczyść moje wybory na niezapisanych projektach." +msgstr "Wyczyść wybory na niezapisanych projektach." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Brak ostrzeżeń przy wczytywaniu plików 3MF z zmodyfikowanymi G-code" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "Auto-Zapis" +msgid "Clear my choice on the unsaved presets." +msgstr "Wyczyść wybory w niezapisanych profilach." + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Wykonuj okresowe kopie zapasowe projektu w celu przywracania po " -"sporadycznych awariach." -msgid "every" -msgstr "każdy" +msgid "Login region" +msgstr "Region logowania" -msgid "The peroid of backup in seconds." -msgstr "Okres kopii zapasowej w sekundach." +msgid "Stealth mode" +msgstr "Tryb niewidoczny" -msgid "Downloads" -msgstr "Lokalizacja pobierania" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Zatrzymuje przesyłanie danych do chmury Bambu. Użytkownicy, którzy nie " +"korzystają z maszyn BBL lub używają trybu „tylko LAN”, mogą bezpiecznie " +"włączyć tę funkcję." -msgid "Dark Mode" -msgstr "Tryb ciemny" +msgid "Network test" +msgstr "Test sieci" -msgid "Enable Dark mode" -msgstr "Włącz tryb ciemny" +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Sprawdzanie aktualizacji do stabilnych wersji" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Automatyczne synchronizowanie profili użytkownika (drukarka/filament/proces)" + +msgid "Update built-in Presets automatically." +msgstr "Automatyczne uaktualnianie wbudowanych profili" + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Włączenie wtyczki sieciowej" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + +msgid "Associate files to Snapmaker Orca" +msgstr "Skojarzenia plików z Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Skojarzenie plików 3MF" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "Ustala Snapmaker Orca jako domyślny program do otwierania plików 3MF." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Skojarzenie plików STL" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "Ustala Snapmaker Orca jako domyślny program do otwierania plików STL." + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Skojarzenie plików STEP" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "Ustala Snapmaker Orca jako domyślny program do otwierania plików STEP." + +msgid "Associate web links to Snapmaker Orca" +msgstr "Powiązania odnośników z Snapmaker Orca" + +msgid "Developer" +msgstr "" msgid "Develop mode" msgstr "Tryb deweloperski" msgid "Skip AMS blacklist check" -msgstr "Pomiń sprawdzanie czarnej listy AMS" +msgstr "Pomijanie sprawdzania czarnej listy AMS" -msgid "Home page and daily tips" -msgstr "Strona główna i porada dnia" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Pokaż stronę główną przy uruchamianiu" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Poziom logowania" + +msgid "fatal" +msgstr "krytyczny" + +msgid "error" +msgstr "błąd" + +msgid "warning" +msgstr "ostrzeżenie" + +msgid "debug" +msgstr "debugowanie" + +msgid "trace" +msgstr "śledzenie" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Ustawienia synchronizacji" @@ -6910,24 +8051,6 @@ msgstr "Włącz SSL(FTP)" msgid "Internal developer mode" msgstr "Wewnętrzny tryb dewelopera" -msgid "Log Level" -msgstr "Poziom logowania" - -msgid "fatal" -msgstr "krytyczny" - -msgid "error" -msgstr "błąd" - -msgid "warning" -msgstr "ostrzeżenie" - -msgid "debug" -msgstr "debugowanie" - -msgid "trace" -msgstr "śledzenie" - msgid "Host Setting" msgstr "Ustawienie hosta" @@ -6949,10 +8072,10 @@ msgstr "przycisk zapisywania debugowania" msgid "save debug settings" msgstr "zapisz ustawienia debugowania" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "Ustawienia DEBUG zapisano pomyślnie!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Przełącz środowisko w chmurze i proszę zaloguj się ponownie!" msgid "System presets" @@ -6964,14 +8087,20 @@ msgstr "Profile użytkownika" msgid "Incompatible presets" msgstr "Profile niekompatybilne" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "Filamenty AMS" -msgid "Click to pick filament color" -msgstr "Kliknij, aby wybrać kolor filamentu" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Proszę wybrać kolor filamentu" +msgid "Click to select filament color" +msgstr "Kliknij, aby wybrać kolor filamentu" msgid "Add/Remove presets" msgstr "Dodaj/Usuń profile" @@ -6982,18 +8111,33 @@ msgstr "Edytuj profil" msgid "Project-inside presets" msgstr "Profile wewnątrz projektu" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Dodaj/Usuń filament" msgid "Add/Remove materials" msgstr "Dodaj/Usuń filamenty" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Wybierz/Usuń drukarki (profile systemowe)" msgid "Create printer" msgstr "Utwórz drukarkę" +msgid "Empty" +msgstr "Puste" + +msgid "Incompatible" +msgstr "Niekompatybilne" + msgid "The selected preset is null!" msgstr "Wybrany profil jest pusty!" @@ -7012,6 +8156,12 @@ msgstr "Proszę podać wartość warstwy (>= 2)." msgid "Plate name" msgstr "Nazwa płyty" +msgid "Same as Global Plate Type" +msgstr "Tak samo jak globalny typ płyty" + +msgid "Bed type" +msgstr "Typ płyty" + msgid "Same as Global Print Sequence" msgstr "Tak samo jak globalna sekwencja druku" @@ -7025,22 +8175,19 @@ msgid "Disable" msgstr "Rozłącz" msgid "Spiral vase" -msgstr "Tryb Wazy" +msgstr "Tryb wazy" msgid "First layer filament sequence" msgstr "Sekwencja koloru pierwszej warstwy" -msgid "Same as Global Plate Type" -msgstr "Tak samo jak globalny typ płyty" - msgid "Same as Global Bed Type" msgstr "Tak samo jak globalny typ stołu" msgid "By Layer" -msgstr "Wg.warstwy" +msgstr "Wg warstwy" msgid "By Object" -msgstr "Wg.obiektu" +msgstr "Wg obiektu" msgid "Accept" msgstr "Akceptuj" @@ -7051,28 +8198,28 @@ msgstr "Wyloguj się" msgid "Slice all plate to obtain time and filament estimation" msgstr "Potnij wszystkie płyty, aby uzyskać oszacowany czas i ilości filamentu" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "Pakowanie danych projektu do pliku 3mf" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Przesyłanie 3mf" msgid "Jump to model publish web page" msgstr "Przejdź do strony publikacji modelu" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Uwaga: Przygotowanie może zająć kilka minut. Proszę o cierpliwość." msgid "Publish" msgstr "Opublikuj" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Publikacja została anulowana" msgid "Slicing Plate 1" -msgstr "Krojenie Płyty 1" +msgstr "Krojenie płyty 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Pakowanie danych do 3mf" msgid "Jump to webpage" @@ -7091,23 +8238,23 @@ msgstr "Profil wewnątrz projektu" msgid "Name is unavailable." msgstr "Nazwa jest niedostępna." -msgid "Overwrite a system profile is not allowed" -msgstr "Nadpisanie profilu systemowego jest niedozwolone" +msgid "Overwriting a system profile is not allowed." +msgstr "Zastąpienie profilu systemowego jest niedozwolone" #, boost-format msgid "Preset \"%1%\" already exists." -msgstr "Profil \"%1%\" już istnieje." +msgstr "Profil „%1%” już istnieje." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "" -"Profil \"%1%\" już istnieje i jest niekompatybilny z aktualną drukarką." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." +msgstr "Profil „%1%” już istnieje i jest niekompatybilny z aktualną drukarką." -msgid "Please note that saving action will replace this preset" -msgstr "Zwróć uwagę, że zapisanie spowoduje zastąpienie tego profilu" +msgid "Please note that saving will overwrite this preset." +msgstr "Zwróć uwagę, że zapisanie spowoduje zastąpienie tego profilu." msgid "The name cannot be the same as a preset alias name." -msgstr "Nazwa nie może być taka sama, jak nazwa profilu ustawień" +msgstr "Nazwa nie może być taka sama, jak nazwa profilu ustawień." msgid "Save preset" msgstr "Zapisz profil" @@ -7118,54 +8265,27 @@ msgstr "Kopiuj" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "Drukarka \"%1%\" jest wybrana z profilem \"%2%\"" +msgstr "Drukarka „%1%” jest wybrana z profilem „%2%”" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Proszę wybrać działanie z profilem \"%1%\" po zapisaniu." +msgstr "Proszę wybrać działanie z profilem „%1%” po zapisaniu." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "Dla \"%1%\", zmień \"%2%\" na \"%3%\" " +msgstr "Dla „%1%”, zmień „%2%” na „%3%” " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "Dla \"%1%\" dodaj \"%2%\" jako nowy szablon" +msgstr "Dla „%1%” dodaj „%2%” jako nowy szablon" #, boost-format msgid "Simply switch to \"%1%\"" -msgstr "Po prostu przełącz na \"%1%\"" +msgstr "Po prostu przełącz na „%1%”" msgid "Task canceled" msgstr "Zadanie anulowane" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Szukaj" - -msgid "My Device" -msgstr "Moje urządzenie" - -msgid "Other Device" -msgstr "Inne urządzenie" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Wprowadź kod dostępu" - -msgid "Can't find my devices?" -msgstr "Nie możesz znaleźć moich urządzeń?" - -msgid "Log out successful." -msgstr "Wylogowanie powiodło się." - -msgid "Busy" -msgstr "Zajęty" - msgid "Bambu Cool Plate" msgstr "Bambu Cool Plate" @@ -7173,25 +8293,64 @@ msgid "PLA Plate" msgstr "Płyta PLA" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "" msgid "Bambu Smooth PEI Plate" -msgstr "Bambu Smooth PEI Plate" +msgstr "" msgid "High temperature Plate" msgstr "Płyta wysokotemperaturowa" msgid "Bambu Textured PEI Plate" -msgstr "Bambu Textured PEI Plate" +msgstr "" -msgid "Send print job to" -msgstr "Wyślij zadanie druku do" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "Kalibracja Dynamiki Przepływu" +msgstr "Kalibracja dynamiki przepływu" -msgid "Click here if you can't connect to the printer" -msgstr "Kliknij tutaj, jeśli nie możesz połączyć się z drukarką" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "wysłanie zakończone" @@ -7199,59 +8358,15 @@ msgstr "wysłanie zakończone" msgid "Error code" msgstr "Kod błędu" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Bez logowania na koncie, wyświetlane są tylko drukarki w trybie LAN" - -msgid "Connecting to server" -msgstr "Łączenie z serwerem" - -msgid "Synchronizing device information" -msgstr "Synchronizacja informacji o urządzeniu" - -msgid "Synchronizing device information time out" -msgstr "Upłynął czas synchronizacji informacji o urządzeniu" - -msgid "Cannot send the print job when the printer is updating firmware" +msgid "High Flow" msgstr "" -"Nie można wysłać zadania do druku, gdy drukarka aktualizuje oprogramowanie" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"Drukarka wykonuje instrukcje. Proszę wznowić drukowanie po ich zakończeniu" - -msgid "The printer is busy on other print job" -msgstr "Drukarka jest zajęta innym zadaniem drukowania" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s przekracza liczbę slotów AMS. Proszę zaktualizować " -"oprogramowanie drukarki, aby obsługiwało przypisywanie slotów AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament przekracza liczbę slotów AMS. Proszę zaktualizować oprogramowanie " -"drukarki, aby obsługiwało przypisywanie slotów AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Ustalono przyporządkowanie filamentów do gniazd w AMS. Możesz kliknąć na " -"dowolny filament powyżej, aby zmienić jego przypisanie do innego gniazda w " -"AMS" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Proszę kliknąć na każdy filament powyżej, aby określić jego przypisany slot " -"AMS przed wysłaniem zadania druku" #, c-format, boost-format msgid "" @@ -7268,61 +8383,40 @@ msgstr "" "Filament nie pasuje do filamentu w slocie AMS. Proszę zaktualizować " "oprogramowanie drukarki, aby obsługiwało przypisywanie slotów AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Oprogramowanie drukarki obsługuje tylko sekwencyjne mapowanie filamentu => " -"slot AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "Przed rozpoczęciem drukowania należy włożyć kartę SD." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"Wybrana drukarka (%s) jest niezgodna z wybranym profilem drukarki w " -"programie (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Aby nagrywać timelapse, należy włożyć kartę SD." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Nie można wysłać zadania druku do drukarki, której oprogramowanie wymaga " -"aktualizacji." - -msgid "Cannot send the print job for empty plate" -msgstr "Nie można wysłać zadania druku dla pustej płyty" - -msgid "This printer does not support printing all plates" -msgstr "Ta drukarka nie obsługuje drukowania na wszystkich płytach" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"Po włączeniu trybu 'spiralna waza', maszyny o strukturze I3 nie będą " -"generować filmów timelapse." +"Po włączeniu trybu wazy, maszyny o strukturze I3 nie będą generować filmów " +"timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse nie jest obsługiwany, ponieważ sekwencja druku jest ustawiona na " -"\"Obiekt po obiekcie\"." msgid "Errors" msgstr "Błędy" -msgid "Please check the following:" -msgstr "Proszę sprawdzić następujące rzeczy:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7335,33 +8429,11 @@ msgid "" "start printing." msgstr "" "W mapowaniu AMS znajdują się nieznane filamenty. Proszę sprawdzić, czy są to " -"wymagane filamenty. Jeśli wszystko jest w porządku, naciśnij \"Potwierdź\", " +"wymagane filamenty. Jeśli wszystko jest w porządku, naciśnij „Potwierdź”, " "aby rozpocząć drukowanie." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "dysza w profilu: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "zapamiętana dysza: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Średnica dyszy w przetworzonym pliku nie jest zgodna z średnicą dyszy w " -"ustawieniach. Jeśli ostatnio zmieniłeś dyszę, przejdź do opcji Urządzenie > " -"Typ dyszy, aby zmienić to ustawienie." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Drukowanie materiału o wysokiej temperaturze (%s materiał) z %s może " -"spowodować uszkodzenie dyszy." +msgid "Please check the following:" +msgstr "Proszę sprawdzić następujące rzeczy:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7375,27 +8447,207 @@ msgstr "" "drukowanie." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "Łączenie z drukarką. Nie można anulować w trakcie procesu łączenia." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Ostrożnie! Kalibracja przepływu na Texture PEI może nie powieść się z powodu " -"nierównomiernie rozłożonej powierzchni." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatyczna kalibracja przepływu za pomocą mikrolidaru" +msgid "Preparing print job" +msgstr "Przygotowywanie zadania do druku" -msgid "Modifying the device name" -msgstr "Modyfikacja nazwy urządzenia" +msgid "The name length exceeds the limit." +msgstr "Długość nazwy przekracza limit." -msgid "Bind with Pin Code" -msgstr "Powiąż za pomocą kodu PIN" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Wysłać na kartę SD drukarki" +msgid "nozzle" +msgstr "Dysza" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Kliknij tutaj, jeśli nie możesz połączyć się z drukarką" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Bez logowania na koncie, wyświetlane są tylko drukarki w trybie LAN" + +msgid "Connecting to server..." +msgstr "Łączenie z serwerem" + +msgid "Synchronizing device information..." +msgstr "Synchronizowanie informacji o urządzeniu" + +msgid "Synchronizing device information timed out." +msgstr "Upłynął czas synchronizowania informacji o urządzeniu" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Nie można wysłać zadania do druku, gdy drukarka aktualizuje oprogramowanie" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Drukarka wykonuje instrukcje. Proszę wznowić drukowanie po ich zakończeniu." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Nie można wysłać zadania druku do drukarki, której oprogramowanie wymaga " +"aktualizacji." + +msgid "Cannot send a print job for an empty plate." +msgstr "Nie można wysłać zadania druku dla pustej płyty" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Ta drukarka nie obsługuje drukowania na wszystkich płytach" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Nie można wysłać zadania druku podczas aktualizacji" @@ -7404,20 +8656,20 @@ msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" "Wybrana drukarka jest niekompatybilna z wybranymi ustawieniami drukarki." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Przed wysłaniem na kartę SD drukarki, należy włożyć kartę SD." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Drukarka musi znajdować się w tej samej sieci LAN co Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "Drukarka nie obsługuje wysyłania na kartę SD." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." -msgstr "Cięcie modelu zakończone." +msgstr "Zakończono cięcie modelu." msgid "View all Daily tips" -msgstr "Zobacz wszystkie Porady Dnia" +msgstr "Zobacz wszystkie porady dnia" msgid "Failed to create socket" msgstr "Nie udało się utworzyć gniazda" @@ -7429,10 +8681,10 @@ msgid "Failed to publish login request" msgstr "Nie udało się opublikować żądania logowania" msgid "Get ticket from device timeout" -msgstr "Czas oczekiwania na uzyskanie biletu z urządzenia minął" +msgstr "Upłynął czas oczekiwania na uzyskanie biletu z urządzenia" msgid "Get ticket from server timeout" -msgstr "Czas oczekiwania na uzyskanie biletu z serwera minął" +msgstr "Upłynął czas oczekiwania na uzyskanie biletu z serwera" msgid "Failed to post ticket to server" msgstr "Nie udało się przesłać biletu na serwer" @@ -7441,7 +8693,7 @@ msgid "Failed to parse login report reason" msgstr "Nie udało się przeanalizować powodu raportu logowania" msgid "Receive login report timeout" -msgstr "Czas oczekiwania na otrzymanie raportu logowania minął" +msgstr "Upłynął czas oczekiwania na otrzymanie raportu logowania" msgid "Unknown Failure" msgstr "Nieznana awaria" @@ -7450,8 +8702,8 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Proszę znaleźć kod PIN na ekranie drukarki w zakładce konta\n" -"i wprowadź go poniżej." +"Proszę odnaleźć kod PIN na ekranie drukarki w zakładce konta\n" +"i wprowadzić go poniżej." msgid "Can't find Pin Code?" msgstr "Nie możesz odszukać kodu PIN?" @@ -7466,13 +8718,13 @@ msgid "Please confirm on the printer screen" msgstr "Proszę potwierdzić na ekranie drukarki" msgid "Log in failed. Please check the Pin Code." -msgstr "Logowanie nie powiodło się. Proszę sprawdzić kod PIN." +msgstr "Nie udało się zalogować. Proszę sprawdzić kod PIN." msgid "Log in printer" msgstr "Zaloguj się do drukarki" -msgid "Would you like to log in this printer with current account?" -msgstr "Czy chcesz zalogować się do tej drukarki z obecnym kontem?" +msgid "Would you like to log in to this printer with the current account?" +msgstr "Czy zalogować się do tej drukarki z obecnym kontem?" msgid "Check the reason" msgstr "Sprawdź powód" @@ -7484,16 +8736,16 @@ msgid "Terms and Conditions" msgstr "Warunki i zasady" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Dziękujemy za zakup urządzenia Bambu Lab. Przed użyciem urządzenia Bambu Lab " "proszę przeczytać warunki i zasady. Klikając, aby zgodzić się na używanie " "urządzenia Bambu Lab, zgadzasz się przestrzegać Polityki Prywatności i " -"Warunków Użytkowania (razem \"Warunki\"). Jeśli nie zgadzasz się lub nie " +"Warunków Użytkowania (razem „Warunki”). Jeśli nie zgadzasz się lub nie " "przestrzegasz Polityki Prywatności Bambu Lab, proszę nie używać sprzętu i " "usług Bambu Lab." @@ -7517,11 +8769,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "W społeczności druku 3D uczymy się od siebie nawzajem, korzystając z " "sukcesów i porażek, aby dostosować nasze parametry i ustawienia cięcia. %s " @@ -7540,19 +8792,19 @@ msgid "Statement on User Experience Improvement Plan" msgstr "Oświadczenie o planie poprawy doświadczenia użytkownika" msgid "Log in successful." -msgstr "Logowanie udane." +msgstr "Zalogowano." msgid "Log out printer" msgstr "Wyloguj się z drukarki" msgid "Would you like to log out the printer?" -msgstr "Czy chcesz się wylogować z drukarki?" +msgstr "Czy wylogować się z drukarki?" msgid "Please log in first." -msgstr "Proszę najpierw się zalogować." +msgstr "Proszę najpierw zalogować." msgid "There was a problem connecting to the printer. Please try again." -msgstr "Wystąpił problem z połączeniem z drukarką. Proszę spróbuj ponownie." +msgstr "Wystąpił problem z połączeniem z drukarką. Proszę spróbować ponownie." msgid "Failed to log out." msgstr "Nie udało się wylogować." @@ -7570,63 +8822,74 @@ msgstr "Szukaj w profilu" msgid "Click to reset all settings to the last saved preset." msgstr "" -"Kliknij, aby zresetować wszystkie ustawienia do ostatnio zapisanego profilu." +"Proszę kliknąć, aby przywrócić wszystkie ustawienia do ostatnio zapisanego " +"profilu." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"Wieża czyszcząca jest wymagana dla płynnego timelapse'u. Możliwe są wady na " -"modelu bez wieży czyszczącej. Czy na pewno chcesz ją wyłączyć?" +"Wieża czyszcząca jest wymagana dla płynnego timelapse. Możliwe są wady na " +"modelu bez wieży czyszczącej. Czy na pewno wyłączyć wieżę czyszczącą?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"Wieża czyszcząca jest wymagana dla płynnego timelapse'u. Możliwe są wady na " -"modelu bez wieży czyszczącej. Czy chcesz włączyć wieżę czyszczącą?" +"Wieża czyszcząca jest wymagana dla płynnego timelapse. Możliwe są wady na " +"modelu bez wieży czyszczącej. Czy włączyć wieżę czyszczącą?" msgid "Still print by object?" msgstr "Czy nadal drukować według obiektu?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Dodaliśmy eksperymentalny styl \"Cienkie Drzewo\", który charakteryzuje się " -"mniejszą objętością podpór, ale i słabszą wytrzymałością.\n" -"Zalecamy używanie go z: 0 warstw łączących, 0 odległością od góry, 2 " -"ścianami." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Przy użyciu materiału podporowego do warstw łączących podpory zalecamy " +"następujące ustawienia:\n" +"0 odległość w osi Z od góry , 0 odstęp warstwy łączącej, wzór " +"koncentryczny i wyłączenie niezależnej wysokości warstwy podpory." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Zmienić te ustawienia automatycznie? \n" +"Zmienić te ustawienia automatycznie?\n" "Tak - Zmień te ustawienia automatycznie\n" "Nie - Nie zmieniaj tych ustawień dla mnie" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Dla stylów \"Drzewo Grube\" i \"Drzewo Hybrydowe\" zalecamy następujące " -"ustawienia: co najmniej 2 warstwy łączące, co najmniej 0,1 mm odległości od " -"góry lub używanie materiałów podporowych na łączeniach." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Przy użyciu materiału podporowego do warstw łączących podpory zalecamy " -"następujące ustawienia:\n" -"0 odległość osu Z od góry, 0 odstęp warstwy łączącej, wzór koncentryczny i " -"wyłączenie niezależnej wysokości warstwy podpory" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7639,7 +8902,15 @@ msgstr "" "druku." msgid "Are you sure you want to enable this option?" -msgstr "Czy na pewno chcesz włączyć tę opcję?" +msgstr "Czy na pewno włączyć tę opcję?" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" msgid "" "Layer height is too small.\n" @@ -7650,13 +8921,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Wysokość warstwy przekracza limit w Ustawieniach Drukarki -> Extruder -> " "Limity wysokości warstwy, co może powodować problemy z jakością druku." -msgid "Adjust to the set range automatically? \n" -msgstr "Dostosować automatycznie do ustawionego zakresu? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Dostosować automatycznie do ustawionego zakresu?\n" msgid "Adjust" msgstr "Dostosuj" @@ -7666,9 +8937,9 @@ msgstr "Ignoruj" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "Funkcja eksperymentalna: Polega na wycofywaniu filamentu na większą " "odległość w celu zminimalizowania płukania, a następne jego odcięcie. Choć " @@ -7677,9 +8948,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Funkcja eksperymentalna: Polega na wycofywaniu filamentu na większą " "odległość w celu zminimalizowania płukania, a następne jego odcięcie. Choć " @@ -7693,10 +8964,87 @@ msgid "" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"Podczas nagrywania timelapse'a bez głowicy drukującej zaleca się dodanie " -"\"Timelaps - Wieża Czyszcząca\" \n" +"Podczas nagrywania timelapse bez głowicy drukującej zaleca się dodanie " +"„Timelapse - Wieża czyszcząca” \n" "przez kliknięcie prawym przyciskiem myszy na pustym miejscu płyty i wybranie " -"\"Dodaj Prymityw\"->\"Timelaps - Wieża Czyszcząca\"." +"„Dodaj Prymityw”->„Timelapse - Wieża czyszcząca”." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Zostanie utworzona kopia obecnego zestawu ustawień i odłączona od ustawień " +"systemowych." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Obecny niestandardowy zestaw ustawień zostanie odłączony od dziedziczącego " +"zestawu systemowego." + +msgid "Modifications to the current profile will be saved." +msgstr "Modyfikacje zostaną zapisane w obecnym profilu." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Tej czynności nie można cofnąć.\n" +"Czy kontynuować?" + +msgid "Detach preset" +msgstr "Odłącz zestaw ustawień" + +msgid "This is a default preset." +msgstr "To jest domyślny zestaw ustawień." + +msgid "This is a system preset." +msgstr "To jest systemowy zestaw ustawień." + +msgid "Current preset is inherited from the default preset." +msgstr "Obecny zestaw ustawień jest dziedziczony z zestawu domyślnego." + +msgid "Current preset is inherited from" +msgstr "Obecny zestaw ustawień jest dziedziczony z" + +msgid "It can't be deleted or modified." +msgstr "Nie można usunąć ani zmodyfikować." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Każda modyfikacja powinna zostać zapisana jako nowy zestaw ustawień " +"dziedziczony z obecnego." + +msgid "To do that please specify a new name for the preset." +msgstr "Aby to zrobić, proszę ustalić nową nazwę zestawu ustawień." + +msgid "Additional information:" +msgstr "Dodatkowe informacje:" + +msgid "vendor" +msgstr "dostawca" + +msgid "printer model" +msgstr "model drukarki" + +msgid "default print profile" +msgstr "domyślny profil druku" + +msgid "default filament profile" +msgstr "domyślny profil filamentu" + +msgid "default SLA material profile" +msgstr "domyślny profil materiału SLA" + +msgid "default SLA print profile" +msgstr "domyślny profil druku SLA" + +msgid "full profile name" +msgstr "pełna nazwa profilu" + +msgid "symbolic profile name" +msgstr "skrócona nazwa profilu" msgid "Line width" msgstr "Szerokość linii" @@ -7747,7 +9095,7 @@ msgid "Bridge" msgstr "Mosty" msgid "Set speed for external and internal bridges" -msgstr "Ustaw szybkość dla zewnętrznych i wewnętrznych mostków" +msgstr "Ustaw szybkość dla zewnętrznych i wewnętrznych mostów" msgid "Travel speed" msgstr "Szybkość przemieszczania" @@ -7759,20 +9107,32 @@ msgid "Jerk(XY)" msgstr "Jerk (XY)" msgid "Raft" -msgstr "Raft" +msgstr "Tratwa (raft)" msgid "Support filament" msgstr "Filament podpory" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "Drzewo" -msgid "Skirt" -msgstr "Skirt" +msgid "Multimaterial" +msgstr "Multimateriał" msgid "Prime tower" msgstr "Wieża czyszcząca" +msgid "Filament for Features" +msgstr "Filament dla elementu druku" + +msgid "Ooze prevention" +msgstr "Zapobieganie wyciekom" + +msgid "Skirt" +msgstr "Skirt" + msgid "Special mode" msgstr "Tryby specjalne" @@ -7829,44 +9189,52 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" "Zalecany zakres temperatury dyszy dla tego filamentu. 0 oznacza brak ustawień" +msgid "Flow ratio and Pressure Advance" +msgstr "Współczynnik przepływu i Wzrost ciśnienia (PA)" + msgid "Print chamber temperature" msgstr "Temperatura komory druku" msgid "Print temperature" msgstr "Temperatura druku" -msgid "Nozzle" -msgstr "Dysza" - msgid "Nozzle temperature when printing" msgstr "Temperatura dyszy podczas druku" -msgid "Cool plate" -msgstr "Cool plate / PLA Plate" +msgid "Cool Plate (SuperTack)" +msgstr "Cool Plate (SuperTack)" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" +msgstr "Cool Plate / PLA Plate" + +msgid "" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Temperatura stołu, gdy zainstalowana jest Cool Plate. Wartość 0 oznacza, że " "filament nie jest przystosowany do druku na Cool Plate" -msgid "Textured Cool plate" -msgstr "Textured Cool plate" +msgid "Textured Cool Plate" +msgstr "Textured Cool Plate" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" "Temperatura stołu przy zainstalowanej Cool Plate. Wartość 0 oznacza, że " "filament nie jest przystosowany do druku na Textured Cool Plate" -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "Engineering Plate" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Temperatura stołu, gdy zainstalowana jest Engineering Plate. Wartość 0 " "oznacza, że filament nie jest przystosowany do druku na Engineering Plate" @@ -7875,9 +9243,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Smooth PEI Plate / High Temp Plate" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Temperatura stołu, gdy zainstalowana jest Smooth PEI Plate/High Temp Plate. " "Wartość 0 oznacza, że filament nie jest przystosowany do druku na Smooth PEI " @@ -7887,8 +9255,8 @@ msgid "Textured PEI Plate" msgstr "Textured PEI Plate" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Temperatura stołu, gdy zainstalowana jest Textured PEI Plate. Wartość 0 " "oznacza, że filament nie jest przystosowany do druku na Textured PEI Plate" @@ -7896,9 +9264,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Ograniczenie prędkości przepływu" -msgid "Cooling" -msgstr "Chłodzenie" - msgid "Cooling for specific layer" msgstr "Chłodzenie dla określonej warstwy" @@ -7948,25 +9313,34 @@ msgstr "Początkowy G-code filamentu" msgid "Filament end G-code" msgstr "Końcowy G-code filamentu" -msgid "Multimaterial" -msgstr "Multimateriał" - msgid "Wipe tower parameters" msgstr "Parametry wieży czyszczącej" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Parametry zmiany narzędzia dla drukarek MM z jednym ekstruderem" -msgid "Ramming settings" -msgstr "Ustawienia wyciskania" +msgid "Set" +msgstr "Ustaw" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Parametry zmiany narzędzia w drukarkach wieloekstruzyjnych MM" +msgid "Dependencies" +msgstr "Zależności" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Kompatybilne profile procesów" + msgid "Printable space" msgstr "Przestrzeń do druku" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Podano nieprawidłową wartość dla parametru%1%: %2%" @@ -7989,7 +9363,7 @@ msgstr "Adaptacyjna siatka stołu" msgid "Accessory" msgstr "Akcesoria" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "G-code drukarki" msgid "Machine start G-code" @@ -8007,9 +9381,12 @@ msgstr "G-code przed zmianą warstwy" msgid "Layer change G-code" msgstr "G-code zmiany warstwy" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "G-code timelapse" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "G-code zmiany filamentu" @@ -8028,6 +9405,12 @@ msgstr "Ograniczenia ruchu" msgid "Normal" msgstr "Normalny" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Ograniczenie prędkości" @@ -8037,20 +9420,44 @@ msgstr "Ograniczenie przyspieszenia" msgid "Jerk limitation" msgstr "Ograniczenie Jerk" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Konfiguracja pojedynczego extrudera wielomateriałowego" +msgid "Number of extruders of the printer." +msgstr "Liczba ekstruderów drukarki." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Wybrano tryb „Pojedynczy ekstruder wielomateriałowy”.\n" +"Wszystkie ekstrudery muszą mieć tę samą średnicę dyszy.\n" +"Czy chcesz, aby średnica wszystkich dysz była taka sama jak średnica dyszy " +"pierwszego ekstrudera?" + +msgid "Nozzle diameter" +msgstr "Średnica dyszy" + msgid "Wipe tower" msgstr "Wieża czyszcząca" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Parametry pojedynczego extrudera wielomateriałowego" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"To jest drukarka wielomateriałowa z jednym ekstruderem. Średnice wszystkich " +"ekstruderów zostaną ustawione na nową wartość. Czy kontynuować?" + msgid "Layer height limits" msgstr "Ograniczenia wysokości warstwy" -msgid "Lift Z Enforcement" -msgstr "Wymuszenie podniesienia osi Z" +msgid "Z-Hop" +msgstr "Z-Hop" msgid "Retraction when switching material" msgstr "Retrakcja podczas zmiany filamentu" @@ -8060,13 +9467,21 @@ msgid "" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"Opcja czyszczenia nie jest dostępna podczas korzystania z trybu retrakcji " -"zaszytego w firmware. \n" +"Opcja wycierania dyszy nie jest dostępna podczas korzystania z trybu " +"retrakcji zaszytego w firmware.\n" "\n" -"Czy powinienem ją wyłączyć, aby umożliwić włączenie retrakcji z firmware?" +"Czy wyłączyć ją, aby umożliwić włączenie retrakcji za pomocą firmware?" msgid "Firmware Retraction" -msgstr "Cofanie firmware" +msgstr "Retrakcja realizowana przez firmware" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" msgstr "Odłączony" @@ -8079,7 +9494,7 @@ msgstr "" "%d profil filamentu i %d profil procesu jest przypisany do tej drukarki. Te " "profile zostaną skasowane, jeśli drukarka zostanie usunięta." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "Profile dziedziczone przez inne profile nie mogą być usunięte!" msgid "The following presets inherit this preset." @@ -8091,7 +9506,7 @@ msgstr[2] "Następnych profili przejmie te ustawienia." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Profil" +msgstr "%1% profil" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." @@ -8099,31 +9514,23 @@ msgstr[0] "Następujący profil również zostanie usunięty." msgstr[1] "Następujące profile również zostaną usunięte." msgstr[2] "Następujące profile również zostaną usunięte." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Czy na pewno chcesz usunąć wybrany profil? \n" -"Jeśli profil odpowiada filamentowi aktualnie używanemu w twojej drukarce, " -"proszę zresetować informacje o filamentach dla tego slotu." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Czy na pewno %1% wybrane ustawienia?" -msgid "All" -msgstr "Wszystkie" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Ustaw" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." -msgstr "Kliknij, aby zresetować bieżącą wartość do wartości globalnej." +msgstr "Kliknij, aby przywrócić bieżącą wartość do wartości globalnej." msgid "Click to drop current modify and reset to saved value." -msgstr "" -"Kliknij, aby odrzucić bieżące zmiany i zresetować do zapisanej wartości." +msgstr "Kliknij, aby odrzucić bieżące zmiany i przywrócić zapisaną wartość." msgid "Process Settings" msgstr "Ustawienia procesu" @@ -8176,7 +9583,7 @@ msgid "" "\"%1%\"." msgstr "" "Zapisz wybrane opcje do profilu \n" -"\"%1%\"." +"„%1%”." #, boost-format msgid "" @@ -8184,18 +9591,18 @@ msgid "" "\"%1%\"." msgstr "" "Przenieś wybrane opcje do nowo wybranego profilu \n" -"\"%1%\"." +"„%1%”." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "Profil \"%1%\" zawiera następujące niezapisane zmiany:" +msgstr "Profil „%1%” zawiera następujące niezapisane zmiany:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" msgstr "" -"Profil \"%1%\" nie jest kompatybilny z nowym profilem drukarki i zawiera " +"Profil „%1%” nie jest kompatybilny z nowym profilem drukarki i zawiera " "następujące niezapisane zmiany:" #, boost-format @@ -8203,12 +9610,12 @@ msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" msgstr "" -"Profil \"%1%\" nie jest kompatybilny z nowym profilem procesu i zawiera " +"Profil „%1%” nie jest kompatybilny z nowym profilem procesu i zawiera " "następujące niezapisane zmiany:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "Zmieniono niektóre ustawienia profilu \"%1%\"." +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Zmieniono niektóre ustawienia profilu „%1%”." msgid "" "\n" @@ -8241,9 +9648,6 @@ msgstr "" msgid "Extruders count" msgstr "Liczba extruderów" -msgid "General" -msgstr "Ogólne" - msgid "Capabilities" msgstr "Możliwości" @@ -8290,7 +9694,7 @@ msgstr "Osłona" #, boost-format msgid "The name \"%1%\" already exists." -msgstr "Nazwa \"%1%\" już istnieje." +msgstr "Nazwa „%1%” już istnieje." msgid "Basic Info" msgstr "Podstawowe informacje" @@ -8310,6 +9714,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Nazwa modelu" +msgid "Description:" +msgstr "Opis:" + #, c-format, boost-format msgid "%s Update" msgstr "Aktualizacja %s" @@ -8320,22 +9727,19 @@ msgstr "Dostępna jest nowa wersja" msgid "Configuration update" msgstr "Aktualizacja konfiguracji" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Dostępny jest nowy pakiet konfiguracyjny, czy chcesz go zainstalować?" -msgid "Description:" -msgstr "Opis:" - msgid "Configuration incompatible" msgstr "Niekompatybilna konfiguracja" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "pakiet konfiguracyjny jest niekompatybilny z obecną aplikacją." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Pakiet konfiguracyjny jest niekompatybilny z obecną aplikacją.\n" "%s zaktualizuje pakiet konfiguracyjny, w przeciwnym razie nie będzie mógł " @@ -8345,9 +9749,6 @@ msgstr "" msgid "Exit %s" msgstr "Wyjście z %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "pakiet konfiguracyjny jest niekompatybilny z obecną aplikacją." - msgid "Configuration updates" msgstr "Aktualizacje konfiguracji" @@ -8357,24 +9758,41 @@ msgstr "Brak dostępnych aktualizacji." msgid "The configuration is up to date." msgstr "Konfiguracja jest aktualna." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Importuj kolory z pliku .OBJ" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "Podaj liczbę kolorów:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "Liczba kolorów powinna mieścić się w zakresie [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "Zalecane " -msgid "Current filament colors:" -msgstr "Aktualne kolory filamentów:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Szybkie ustawienie:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "Dopasowanie koloru" @@ -8385,31 +9803,175 @@ msgstr "Przybliżone dopasowanie kolorów." msgid "Append" msgstr "Dołącz" -msgid "Add consumable extruder after existing extruders." -msgstr "Dodaj ekstruder do użycia po już istniejących ekstruderach" +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "Zresetuj przypisane ekstrudery." -msgid "Cluster colors" -msgstr "Klasteryzacja kolorów" - -msgid "Map Filament" -msgstr "Przypisz filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Uwaga: Kolor został wybrany. Możesz kliknąć OK \n" -"aby kontynuować, lub dostosować go ręcznie." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Użyj AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Wybrana drukarka (%s) jest niezgodna z wybranym profilem drukarki w " +"programie (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse nie jest obsługiwany, ponieważ sekwencja druku jest ustawiona na " +"„Obiekt po obiekcie”." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Ostrzeżenie: Suma nowo dodanych i \n" -" obecnych ekstruderów przekracza 16." msgid "Ramming customization" msgstr "Dostosowanie wyciskania" @@ -8435,37 +9997,25 @@ msgstr "" "Jest to ustawienie na poziomie eksperta, nieprawidłowa regulacja " "prawdopodobnie doprowadzi do zacięć filamentu, zgrzytania koła extrudera itp." -msgid "Total ramming time" -msgstr "Całkowity czas wyciskania" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" +"Aby uzyskać stałe natężenie przepływu, przytrzymaj %1% podczas przeciągania." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Całkowita objętość wyciskania" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Szerokość linii wyciskania" - -msgid "Ramming line spacing" -msgstr "Odstęp linii wyciskania" - -msgid "Auto-Calc" -msgstr "Auto-obliczenia" - -msgid "Re-calculate" -msgstr "Przelicz ponownie" - -msgid "Flushing volumes for filament change" -msgstr "Objętości płukania przy zmianie filamentu" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca będzie przeliczał objętość płukania za każdym razem, gdy zmieni się " -"kolor filamentu. Możesz wyłączyć auto-przeliczanie w Snapmaker Orca > " -"Preferencje" msgid "Flushing volume (mm³) for each filament pair." msgstr "Objętość płukania (mm³) dla każdej pary filamentów." @@ -8478,30 +10028,30 @@ msgstr "Sugerowana objętość płukania w zakresie [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Mnożnik powinien być w zakresie [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Przelicz ponownie" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Mnożnik" -msgid "unloaded" -msgstr "rozładowywanie" +msgid "Flushing volumes for filament change" +msgstr "Objętości płukania przy zmianie filamentu" -msgid "loaded" -msgstr "załadowany" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Od" - -msgid "To" -msgstr "Do" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" -"Do wykonania tego zadania wymagany jest Windows Media Player! Czy chcesz " -"włączyć 'Windows Media Player' dla swojego systemu operacyjnego?" +"Do wykonania tego zadania wymagany jest Windows Media Player! Czy włączyć " +"„Windows Media Player” dla systemu operacyjnego?" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " @@ -8512,7 +10062,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Brakujący komponent BambuSource zarejestrowany do odtwarzania mediów! Proszę " "ponownie zainstalować Snapmaker Orca lub skonsultować się z pomocą po-" @@ -8527,7 +10077,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "Twój system nie posiada kodeków H.264 dla GStreamer, które są wymagane do " @@ -8559,17 +10109,11 @@ msgstr "Lista obiektów" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Import danych geometrycznych z plików STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Wklej z schowka" msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "Pokaż/Ukryj okno dialogowe ustawień urządzeń 3Dconnexion" +msgstr "Pokaż/ukryj okno dialogowe ustawień urządzeń 3Dconnexion" msgid "Switch table page" msgstr "Przełącz stronę tabeli" @@ -8580,69 +10124,44 @@ msgstr "Pokaż listę skrótów klawiszowych" msgid "Global shortcuts" msgstr "Globalne skróty" -msgid "Rotate View" -msgstr "Obróć widok" - msgid "Pan View" msgstr "Przesuń widok" -msgid "Mouse wheel" -msgstr "Kółko myszy" +msgid "Rotate View" +msgstr "Obróć widok" msgid "Zoom View" msgstr "Przybliż widok" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Ta funkcja automatycznie ustawia orientację zaznaczonych lub wszystkich " "obiektów. Jeśli są wybrane obiekty, ustawi tylko te wybrane. W przeciwnym " -"razie ustawia wszystkie obiekty na aktualnej płycie roboczej." +"razie ustawi wszystkie obiekty bieżącego projektu." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "" +"Ta funkcja automatycznie ustawia orientację wszystkie obiekty na aktualnej " +"płycie roboczej." msgid "Collapse/Expand the sidebar" msgstr "Zwiń/Rozwiń pasek boczny" -msgid "⌘+Any arrow" -msgstr "⌘+Dowolna strzałka" +msgid "Any arrow" +msgstr "Dowolna strzałka" msgid "Movement in camera space" msgstr "Ruch w przestrzeni kamery" -msgid "⌥+Left mouse button" -msgstr "⌥+Lewy przycisk myszy" - msgid "Select a part" msgstr "Wybierz część" -msgid "⌘+Left mouse button" -msgstr "⌘+Lewy przycisk myszy" - msgid "Select multiple objects" msgstr "Wybierz wiele obiektów" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Dowolna strzałka" - -msgid "Alt+Left mouse button" -msgstr "Alt+Lewy przycisk myszy" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Lewy przycisk myszy" - -msgid "Shift+Left mouse button" -msgstr "Shift+Lewy przycisk myszy" - msgid "Select objects by rectangle" msgstr "Wybierz obiekty prostokątem" @@ -8670,9 +10189,6 @@ msgstr "Strzałka w prawo" msgid "Move selection 10 mm in positive X direction" msgstr "Przesuń wybrane o 10 mm w kierunku dodatnim osi X" -msgid "Shift+Any arrow" -msgstr "Shift+Dowolna strzałka" - msgid "Movement step set to 1 mm" msgstr "Ustaw krok ruchu na 1 mm" @@ -8704,28 +10220,43 @@ msgid "Select all objects" msgstr "Wybierz wszystkie obiekty" msgid "Gizmo move" -msgstr "Przenoszenie za pomocą \"uchwytów\"" - -msgid "Gizmo scale" -msgstr "Skalowanie za pomocą \"uchwytów\"" +msgstr "Przenoszenie za pomocą „uchwytów”" msgid "Gizmo rotate" -msgstr "Obracanie za pomocą \"uchwytów\"" +msgstr "Obracanie za pomocą „uchwytów”" + +msgid "Gizmo scale" +msgstr "Skalowanie za pomocą „uchwytów”" + +msgid "Gizmo place face on bed" +msgstr "Położenie na płaszczyźnie za pomocą „uchwytów”" msgid "Gizmo cut" -msgstr "Cięcie za pomocą \"uchwytów\"" +msgstr "Cięcie za pomocą „uchwytów”" -msgid "Gizmo Place face on bed" -msgstr "Położenie na płaszczyźnie za pomocą \"uchwytów\"" +msgid "Gizmo mesh boolean" +msgstr "Gizmo operacje boolowskie na siatce" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" -msgstr "Punkty podpór SLA za pomocą \"uchwytów\"" +msgstr "Punkty podpór SLA za pomocą „uchwytów”" msgid "Gizmo FDM paint-on seam" msgstr "Uchwyt malowania szwu FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Uchwyt wytłaczania / grawerowania tekstu" +msgid "Gizmo text emboss/engrave" +msgstr "Uchwyt wytłaczania/grawerowania tekstu" + +msgid "Gizmo measure" +msgstr "Gizmo mierzyć" + +msgid "Gizmo assemble" +msgstr "Gizmo montować" + +msgid "Gizmo brim ears" +msgstr "Gizmo uszy brim" msgid "Zoom in" msgstr "Przybliżenie" @@ -8742,32 +10273,20 @@ msgstr "Płyta" msgid "Move: press to snap by 1mm" msgstr "Przesuń: naciśnij, aby przyciągnąć co 1 mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Kółko myszy" - msgid "Support/Color Painting: adjust pen radius" msgstr "Podpory/Kolorowanie: dostosuj promień pędzla" -msgid "⌥+Mouse wheel" -msgstr "⌥+Kółko myszy" - msgid "Support/Color Painting: adjust section position" msgstr "Podpory/Kolorowanie: dostosuj pozycję sekcji" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Kółko myszy" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Kółko myszy" - msgid "Gizmo" msgstr "Uchwyt" msgid "Set extruder number for the objects and parts" msgstr "Ustaw numer extrudera dla obiektów i części" -msgid "Delete objects, parts, modifiers " -msgstr "Usuń obiekty, części, modyfikatory " +msgid "Delete objects, parts, modifiers" +msgstr "Usuń obiekty, części, modyfikatory" msgid "Select the object/part and press space to change the name" msgstr "Wybierz obiekt/część i naciśnij spację, aby zmienić nazwę" @@ -8796,15 +10315,12 @@ msgstr "Poziomy suwak - Przesuń aktywny punkt w prawo" msgid "On/Off one layer mode of the vertical slider" msgstr "Włącz/wyłącz wyświetlanie jednej warstwy suwaka pionowego" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Włącz/Wyłącz okno G-code" msgid "Move slider 5x faster" msgstr "Przesuń suwak 5x szybciej" -msgid "Shift+Mouse wheel" -msgstr "Shift+Kółko myszy" - msgid "Horizontal slider - Move to start position" msgstr "Suwak poziomy - Przesuń do pozycji początkowej" @@ -8815,7 +10331,7 @@ msgid "Release Note" msgstr "Informacje o wydaniu" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "informacje o aktualizacji wersji %s:" msgid "Network plug-in update" @@ -8828,8 +10344,8 @@ msgstr "" "Snapmaker Orca." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "Dostępna jest nowa wtyczka sieciowa (%s). Czy chcesz ją zainstalować?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Dostępna jest nowa wtyczka sieciowa (%s). Czy zainstalować ją?" msgid "New version of Snapmaker Orca" msgstr "Nowa wersja Snapmaker Orca" @@ -8837,63 +10353,29 @@ msgstr "Nowa wersja Snapmaker Orca" msgid "Skip this Version" msgstr "Pomiń tę wersję" -msgid "Done" -msgstr "Gotowe" - -msgid "resume" -msgstr "wznów" - -msgid "Resume Printing" -msgstr "Wznów zadanie drukowania" - -msgid "Resume Printing(defects acceptable)" -msgstr "Wznów drukowanie (wady są do zaakceptowania)" - -msgid "Resume Printing(problem solved)" -msgstr "Wznów drukowanie (problem został rozwiązany)" - -msgid "Stop Printing" -msgstr "Zatrzymaj Drukowanie" - -msgid "Check Assistant" -msgstr "Sprawdź Asystenta" - -msgid "Filament Extruded, Continue" -msgstr "Gotowe, kontynuuj" - -msgid "Not Extruded Yet, Retry" -msgstr "Jeszcze nie wytłoczono, Spróbuj ponownie" - -msgid "Finished, Continue" -msgstr "Zakończono, Kontynuuj" - -msgid "Load Filament" -msgstr "Ładuj" - -msgid "Filament Loaded, Resume" -msgstr "Filament załadowany, Wznów" - -msgid "View Liveview" -msgstr "Podgląd na żywo" - msgid "Confirm and Update Nozzle" msgstr "Potwierdź i zaktualizuj dyszę" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Nieudane połączenie LAN (wysyłanie pliku do druku)" +msgid "Connect the printer using IP and access code" +msgstr "Połącz z drukarką używając adresu IP i kodu dostępu" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Krok 1, proszę potwierdzić, że Snapmaker Orca i drukarka są w tej samej sieci " -"LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Krok 2, jeśli IP i kod dostępu poniżej różnią się od rzeczywistych wartości " -"na drukarce, proszę je poprawić." msgid "IP" msgstr "IP" @@ -8901,20 +10383,42 @@ msgstr "IP" msgid "Access Code" msgstr "Kod dostępu" +msgid "Printer model" +msgstr "Model drukarki" + +msgid "Printer name" +msgstr "Nazwa drukarki" + msgid "Where to find your printer's IP and Access Code?" -msgstr "Gdzie znaleźć IP i kod dostępu do drukarki?" +msgstr "Gdzie znaleźć adres IP i kod dostępu do drukarki?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Krok 3: Sprawdź adres IP za pomocą polecenia ping, aby sprawdzić utratę " -"pakietów i opóźnienia." +msgid "Connect" +msgstr "Połącz" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Ręczna konfiguracja" msgid "IP and Access Code Verified! You may close the window" msgstr "Zweryfikowano IP i kod dostępu! Możesz zamknąć okno" +msgid "connecting..." +msgstr "nawiązywanie połączenia..." + +msgid "Failed to connect to printer." +msgstr "Nie udało się połączyć z drukarką." + +msgid "Failed to publish login request." +msgstr "Nie udało się opublikować żądania logowania." + +msgid "The printer has already been bound." +msgstr "Drukarka jest już powiązana." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "Tryb drukarki jest nieprawidłowy. Proszę przełączyć na tylko LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Nawiązywanie połączenia z drukarką... Okno zostanie zamknięte później" + msgid "Connection failed, please double check IP and Access Code" msgstr "Połączenie nieudane, proszę sprawdzić podwójnie IP i kod dostępu" @@ -8925,38 +10429,58 @@ msgstr "" "Połączenie nieudane! Jeśli twój IP i kod dostępu są poprawne, \n" "przejdź do kroku 3, aby rozwiązać problemy z siecią" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Model:" -msgid "Serial:" -msgstr "Seria:" - -msgid "Version:" -msgstr "Wersja:" - msgid "Update firmware" msgstr "Aktualizuj oprogramowanie" msgid "Beta version" msgstr "Wersja beta" -msgid "Latest version" -msgstr "Najnowsza wersja" - msgid "Updating" msgstr "Aktualizowanie" -msgid "Updating failed" +msgid "Update failed" msgstr "Aktualizacja nieudana" -msgid "Updating successful" +msgid "Update successful" msgstr "Aktualizacja udana" msgid "" "Are you sure you want to update? This will take about 10 minutes. Do not " "turn off the power while the printer is updating." msgstr "" -"Czy na pewno chcesz zaktualizować? To zajmie około 10 minut. Nie wyłączaj " +"Czy na pewno zaktualizować? To zajmie około 10 minut. Proszę nie wyłączać " "zasilania podczas aktualizacji drukarki." msgid "" @@ -8966,8 +10490,8 @@ msgid "" msgstr "" "Wykryto ważną aktualizację, która musi zostać uruchomiona, zanim będzie " "można kontynuować drukowanie. Czy chcesz teraz dokonać aktualizacji? Możesz " -"również dokonać aktualizacji później, wybierając opcję 'Aktualizacja " -"oprogramowania'." +"również dokonać aktualizacji później, wybierając opcję „Aktualizacja " +"oprogramowania”." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -8981,8 +10505,8 @@ msgstr "" msgid "Extension Board" msgstr "Płyta rozszerzeń" -msgid "Saving objects into the 3mf failed." -msgstr "Błąd podczas zapisywania obiektów do pliku 3mf." +msgid "Saving objects into the 3MF failed." +msgstr "Błąd podczas zapisywania obiektów do pliku 3MF." msgid "Only Windows 10 is supported." msgstr "Obsługiwany jest tylko Windows 10." @@ -9005,23 +10529,23 @@ msgstr "Naprawa nie powiodła się." msgid "Loading repaired objects" msgstr "Ładowanie naprawionych obiektów" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "Błąd podczas eksportowania pliku 3mf" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "Błąd podczas importowania pliku 3mf" -msgid "Repaired 3mf file does not contain any object" -msgstr "Naprawiony plik 3mf nie zawiera żadnych obiektów" +msgid "Repaired 3MF file does not contain any object" +msgstr "Naprawiony plik 3MF nie zawiera żadnych obiektów" -msgid "Repaired 3mf file contains more than one object" -msgstr "Naprawiony plik 3mf zawiera więcej niż jeden obiekt" +msgid "Repaired 3MF file contains more than one object" +msgstr "Naprawiony plik 3MF zawiera więcej niż jeden obiekt" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Naprawiony plik 3mf nie zawiera żadnego objętości" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Naprawiony plik 3MF nie zawiera żadnego objętości" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Naprawiony plik 3mf zawiera więcej niż jedną objętość" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Naprawiony plik 3MF zawiera więcej niż jedną objętość" msgid "Repair finished" msgstr "Naprawa zakończona" @@ -9072,7 +10596,14 @@ msgid "No object can be printed. Maybe too small" msgstr "Żaden obiekt nie może być wydrukowany. Może jest za mały" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Twój wydruk znajduje się bardzo blisko obszaru czyszczenia dyszy. Upewnij " +"się, że nie dojdzie do kolizji." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Nie udało się wygenerować G-code dla nieprawidłowego niestandardowego G-" @@ -9087,6 +10618,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "Generowanie G-code: warstwa %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Wewnętrzna ściana" @@ -9100,7 +10640,7 @@ msgid "Sparse infill" msgstr "Wypełnienie" msgid "Internal solid infill" -msgstr "Wypełnienie wewn." +msgstr "Wypełnienie wewnętrzne" msgid "Top surface" msgstr "Górna powierzchnia" @@ -9124,10 +10664,10 @@ msgid "Multiple" msgstr "Wielokrotne" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" -"Nie udało się obliczyć szerokości linii %1%. Nie można uzyskać wartości \"%2%" -"\" " +"Nie udało się obliczyć szerokości linii %1%. Nie można uzyskać wartości " +"„%2%” " msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " @@ -9244,15 +10784,16 @@ msgstr "%1% jest zbyt blisko innych, mogą wystąpić kolizje." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% jest zbyt wysoki, mogą wystąpić kolizje." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" jest zbyt blisko innych modeli, mogą wystąpić kolizje podczas drukowania." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " jest zbyt blisko obszaru wykluczenia, mogą wystąpić kolizje podczas " "drukowania." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Wieża Czyszcząca" @@ -9263,12 +10804,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr " jest zbyt blisko obszaru wykluczenia, mogą wystąpić kolizje.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Nie można drukować jednocześnie wieloma filamentami o znacznych różnicach " -"temperatur. Może to spowodować zablokowanie lub uszkodzenie extrudera i dyszy" msgid "No extrusions under current settings." msgstr "Brak ekstruzji przy obecnych ustawieniach." @@ -9277,21 +10840,37 @@ msgid "" "Smooth mode of timelapse is not supported when \"by object\" sequence is " "enabled." msgstr "" -"Tryb \"Wygładzony\" timelapsu nie jest wspierany, gdy włączona jest " -"sekwencja \"według obiektu\"." +"Tryb „Wygładzony” timelapse nie jest obsługiwany, gdy włączona jest " +"sekwencja druku „według obiektu”." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Proszę wybrać sekwencję druku \"Według obiektu\", aby drukować wiele " -"obiektów w trybie wazy." +"Proszę wybrać sekwencję druku „Według obiektu”, aby drukować wiele obiektów " +"w trybie wazy." msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." +msgstr "Tryb „Wazy” nie działa, gdy obiekt zawiera więcej niż jeden filament." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." msgstr "" -"Tryb \"Wazy\" nie działa, gdy obiekt zawiera więcej niż jeden filament." +"Chociaż obiekt %1% mieści się w objętości roboczej, przekracza maksymalną " +"jej wysokość z powodu kompensacji skurczu materiału." #, boost-format msgid "The object %1% exceeds the maximum build volume height." @@ -9317,11 +10896,13 @@ msgstr "" "Zmienna wysokość warstwy nie jest dostępna w przypadku podpór organicznych." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Różne średnice dysz i różne średnice filamentów nie są dozwolone, gdy " -"włączona jest wieża czyszcząca." +"Różne średnice dysz i filamentu mogą nie działać poprawnie, gdy włączona " +"jest wieża czyszcząca. Jest to mocno eksperymentalna funkcja, więc zaleca " +"się ostrożność." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9331,10 +10912,11 @@ msgstr "" "extrudera (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Zapobieganie wyciekom nie jest obecnie wspierane, gdy włączona jest wieża " -"czyszcząca." +"Zapobieganie wyciekom (ooze) nie jest obecnie wspierane, gdy włączona jest " +"wieża czyszcząca." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9344,7 +10926,7 @@ msgstr "" "Klipper, RepRap/Sprinter, RepRapFirmware i Repetier." msgid "The prime tower is not supported in \"By object\" print." -msgstr "Wieża czyszcząca nie jest wspierana w druku \"Według obiektu\"." +msgstr "Wieża czyszcząca nie jest wspierana w druku „Według obiektu”." msgid "" "The prime tower is not supported when adaptive layer height is on. It " @@ -9353,22 +10935,30 @@ msgstr "" "Wieża czyszcząca nie jest wspierana, gdy włączona jest adaptacyjna wysokość " "warstwy. Wymaga to, aby wszystkie obiekty miały tę samą wysokość warstwy." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"Wieża czyszcząca wymaga, aby \"szczelina podpory\" była wielokrotnością " +"Wieża czyszcząca wymaga, aby „szczelina podpory” była wielokrotnością " "wysokości warstwy" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "Wieża czyszcząca wymaga, aby wszystkie obiekty miały tę samą wysokość warstwy" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Wieża czyszcząca wymaga, aby wszystkie obiekty były drukowane na tej samej " "liczbie warstw tratwy" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Wieża czyszcząca jest obsługiwana tylko dla wielu obiektów, pod warunkiem, " +"że mają tę samą wartość support_top_z_distance." + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9378,17 +10968,34 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "Wieża czyszcząca jest dostępna dla wielu modeli pod warunkiem, że mają one " "taką samą wysokość warstwy" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Jeden lub więcej obiektów zostało przypisanych do ekstrudera, który nie jest " +"dostępny w drukarce." + msgid "Too small line width" msgstr "Zbyt mała szerokość linii" msgid "Too large line width" msgstr "Zbyt duża szerokość linii" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Drukowanie z użyciem wielu ekstruderów o różnych średnicach dysz. Jeśli " +"podpory mają być drukowane przy użyciu bieżącego filamentu (support_filament " +"== 0 lub support_interface_filament == 0), wszystkie dysze muszą mieć tę " +"samą średnicę." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" @@ -9422,7 +11029,7 @@ msgstr "" "Używane są wzmocnienia podpór, ale funkcja podpór nie jest włączona. Proszę " "ją włączyć." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "Wysokość warstwy nie może przekraczać średnicy dyszy" msgid "" @@ -9432,20 +11039,20 @@ msgid "" msgstr "" "Relatywne adresowanie extrudera wymaga resetowania pozycji extrudera na " "każdej warstwie, aby zapobiec utracie dokładności zmiennoprzecinkowej. Dodaj " -"\"G92 E0\" do layer_gcode." +"„G92 E0” do layer_gcode." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -"Znaleziono \"G92 E0\" w before_layer_gcode, co jest niezgodne z absolutnym " +"Znaleziono „G92 E0” w before_layer_gcode, co jest niezgodne z absolutnym " "adresowaniem extrudera." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" -"Znaleziono \"G92 E0\" w layer_gcode, co jest niezgodne z absolutnym " +"Znaleziono „G92 E0” w layer_gcode, co jest niezgodne z absolutnym " "adresowaniem extrudera." #, c-format, boost-format @@ -9473,6 +11080,15 @@ msgstr "" "Możesz dostosować ustawienie maksymalnego jerku w konfiguracji swojej " "drukarki, aby uzyskać wyższe prędkości." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9503,8 +11119,20 @@ msgstr "" "Możesz dostosować wartość machine_max_acceleration_extruding w konfiguracji " "swojej drukarki, aby uzyskać wyższe prędkości." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Kompensacja skurczu filamentu nie będzie zastosowana, ponieważ skurcz " +"używanych filamentów jest zbyt zróżnicowany." + msgid "Generating skirt & brim" -msgstr "Generowanie Skirtu i Brimu" +msgstr "Generowanie skirtu i brimu" msgid "Exporting G-code" msgstr "Eksportowanie G-code" @@ -9515,9 +11143,15 @@ msgstr "Generowanie G-code" msgid "Failed processing of the filename_format template." msgstr "Niepowodzenie przetwarzania szablonu filename_format." +msgid "Printer technology" +msgstr "Technologia druku" + msgid "Printable area" msgstr "Obszar druku" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Obszar wykluczony z druku" @@ -9529,7 +11163,7 @@ msgstr "" "Obszar niemożliwy do wydrukowania w płaszczyźnie XY. Na przykład, drukarki " "serii X1 używają przedniego lewego rogu do cięcia filamentu podczas jego " "zmiany. Obszar jest wyrażony jako wielokąt punktami w następującym formacie: " -"\"XxY, XxY, ...\"" +"„XxY, XxY, ...”" msgid "Bed custom texture" msgstr "Niestandardowa tekstura stołu" @@ -9541,14 +11175,14 @@ msgid "Elephant foot compensation" msgstr "Kompensacja \"stopy słonia\"" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Zmniejszenie pierwszej warstwy w płaszczyźnie XY o określoną wartość, aby " "skompensować efekt \"stopy słonia\"" msgid "Elephant foot compensation layers" -msgstr "Warstwy kompensacji \"stopy słonia\"" +msgstr "Warstwy kompensacji \"stopy słonia\"" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9557,7 +11191,7 @@ msgid "" "this value." msgstr "" "Liczba warstw, na które będzie rozciągać się kompensacja \"stopy słonia\". " -"Pierwsza warstwa zostanie zmniejszona o wartość kompensacji 'stopy słonia', " +"Pierwsza warstwa zostanie zmniejszona o wartość kompensacji „stopy słonia”, " "a następne warstwy będą zmniejszane liniowo, aż do warstwy wskazanej przez " "tę wartość." @@ -9566,7 +11200,7 @@ msgstr "warstwy" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Wysokość każdej warstwy. Mniejsza wysokość warstwy oznacza większą " "dokładność, ale dłuższy czas drukowania" @@ -9574,15 +11208,23 @@ msgstr "" msgid "Printable height" msgstr "Maksymalna wysokość" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "" "Maksymalna wysokość możliwa do wydrukowania, ograniczona przez mechanizm " "drukarki" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "Preferowana orientacja" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" "Automatyczne orientowanie plików STL na osi Z przy początkowym imporcie" @@ -9592,7 +11234,7 @@ msgstr "Nazwy profilu drukarki" msgid "Use 3rd-party print host" msgstr "Użyj serwera druku firm trzecich" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "Zezwól na kontrolowanie drukarki BambuLab przez serwery druku innych firm" @@ -9613,16 +11255,16 @@ msgstr "" "password@your-octopi-address/" msgid "Device UI" -msgstr "Interfejs użytkownika urządzenia" +msgstr "UI urządzenia" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Podaj URL interfejsu użytkownika swojego urządzenia, jeśli nie jest taki sam " "jak print_host" msgid "API Key / Password" -msgstr "Klucz API / Hasło" +msgstr "Klucz API / hasło" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " @@ -9631,7 +11273,7 @@ msgstr "" "Snapmaker Orca może przesyłać pliki G-code na hosta drukarki. To pole powinno " "zawierać klucz API lub hasło wymagane do uwierzytelnienia." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Nazwa drukarki" msgid "HTTPS CA File" @@ -9664,11 +11306,11 @@ msgstr "" "offline punktów dystrybucji. Można chcieć włączyć tę opcję dla " "samopodpisanych certyfikatów, jeśli połączenie zawodzi." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Nazwy profili odnoszących się do drukarki fizycznej" msgid "Authorization Type" -msgstr "Typ autoryzacji" +msgstr "Rodzaj autoryzacji" msgid "API key" msgstr "Klucz API" @@ -9676,29 +11318,30 @@ msgstr "Klucz API" msgid "HTTP digest" msgstr "HTTP digest" -msgid "Avoid crossing wall" -msgstr "Unikaj ruchów nad obrysami" +msgid "Avoid crossing walls" +msgstr "Unikanie ruchów nad obrysami" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Omijaj i unikaj przemieszczania się nad ścianą, co może spowodować powstanie " "grudek na powierzchni" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Maksymalna długość objazdu" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Unikaj ruchów nad obrysami-\n" +"Unikanie ruchów nad obrysami-\n" "Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli " -"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami" -"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować " -"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu " -"bezpośredniego." +"objazd miałby wykroczyć poza tę wartość, funkcja „Unikanie ruchów nad " +"obrysami” zostanie zignorowana dla tej ścieżki. Długość objazdu można " +"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z " +"długości ruchu bezpośredniego." msgid "mm or %" msgstr "mm lub %" @@ -9707,42 +11350,44 @@ msgid "Other layers" msgstr "Pozostałe warstwy" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Temperatura stołu dla warstw poza pierwszą. Wartość 0 oznacza, że filament " -"nie obsługuje drukowania na Cool Plate" - -msgid "°C" -msgstr "°C" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "" +"Temperatura stołu dla warstw poza pierwszą. Wartość 0 oznacza, że filament " +"nie obsługuje drukowania na Cool Plate." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "Temperatura stołu dla warstw, z wyjątkiem pierwszej. Wartość 0 oznacza, że " -"filament nie nadaje się do druku na Textured Cool Plate" +"filament nie nadaje się do druku na Textured Cool Plate." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Temperatura stołu dla warstw poza pierwszą. Wartość 0 oznacza, że filament " -"nie obsługuje drukowania na Engineering Plate" +"nie obsługuje drukowania na Engineering Plate." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Temperatura stołu dla warstw poza pierwszą. Wartość 0 oznacza, że filament " -"nie obsługuje drukowania na High Temp Plate" +"nie obsługuje drukowania na High Temp Plate." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Temperatura stołu dla warstw poza pierwszą. Wartość 0 oznacza, że filament " -"nie obsługuje drukowania na Textured PEI Plate" +"nie obsługuje drukowania na Textured PEI Plate." msgid "Initial layer" msgstr "Pierwsza warstwa" @@ -9751,54 +11396,62 @@ msgid "Initial layer bed temperature" msgstr "Temperatura stołu pierwszej warstwy" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"Temperatura stołu dla pierwszej warstwy. Wartość 0 oznacza, że filament nie " +"obsługuje druku na Cool Plate SuperTack." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie " "obsługuje drukowania na Cool Plate" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" "Temperatura stołu dla pierwszej warstwy. Wartość 0 oznacza, że filament nie " "nadaje się do druku na Textured Cool Plate" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie " "obsługuje drukowania na Engineering Plate" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie " "obsługuje drukowania na High Temp Plate" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie " "obsługuje drukowania na Textured PEI Plate" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Rodzaje płyt roboczych obsługiwanych przez drukarkę" msgid "Smooth Cool Plate" msgstr "Smooth Cool Plate" -msgid "Engineering Plate" -msgstr "Engineering Plate" - msgid "Smooth High Temp Plate" msgstr "Smooth High Temp Plate" -msgid "Textured Cool Plate" -msgstr "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "" msgid "First layer print sequence" msgstr "Sekwencja druku pierwszej warstwy" @@ -9812,7 +11465,7 @@ msgstr "Liczba warstw ze zmienioną kolejnością drukowania" msgid "Other layers filament sequence" msgstr "Kolejność filamenu dla pozostałych warstw" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" "Ten G-code jest wstawiany przy każdej zmianie warstwy, tuż przed " "podniesieniem osi Z" @@ -9823,7 +11476,7 @@ msgstr "Dolne warstwy powłoki" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "To jest liczba pełnych warstw dolnej powłoki, włączając w to dolną " "powierzchnie. Jeżeli grubość obliczona na podstawie tej wartości jest " @@ -9837,8 +11490,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Ilość dolnych, pełnych warstw zostaje zwiększona podczas przygotowywania " "modelu do druku (slicingu), jeżeli wyliczona grubość dolnych warstw powłoki " @@ -9851,103 +11504,218 @@ msgid "Apply gap fill" msgstr "Zastosuj wypełnienie szczelin" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" -msgstr "" -"Umożliwia wypełnienie szpar/szczelin dla wybranych powierzchni. Minimalną " -"długość szczeliny, która zostanie wypełniona, można kontrolować poprzez " -"opcję 'filtruj wąskie szczeliny' znajdującej się poniżej.\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." +msgstr "" +"Włącza wypełnienie szczelin dla zaznaczonych powierzchni stałych. Minimalna " +"długość szczeliny, która zostanie wypełniona, może być kontrolowana z opcji " +"filtruj małe szczeliny znajdującej się poniżej.\n" "Opcje:\n" -"1. Wszędzie: Stosuje wypełnienie na górnych, dolnych i wewnętrznych " -"powierzchniach stałych\n" -"2. Powierzchnie górne i dolne: Stosuje wypełnienie tylko na górnych i " -"dolnych powierzchniach\n" -"3. Nigdzie: Wyłącza wypełnienie\n" +"1. Wszędzie: Zastosowuje wypełnienie szczelin do górnych, dolnych i " +"wewnętrznych pełnych powierzchni dla maksymalnej wytrzymałości.\n" +"2. Powierzchnie górne i dolne: Zastosowuje wypełnienie szczelin tylko do " +"powierzchni górnej i dolnej, równoważąc szybkość druku, zmniejszając " +"potencjalne nadmierne wytłaczanie dla wypełnienia pełnego i zapewniając, że " +"górne i dolne powierzchnie nie mają dziur.\n" +"3. Nigdzie: Wyłącza wypełnienie szczelin dla wszystkich obszarów pełnego " +"wypełnienia.\n" +"Zauważ, że jeśli używasz klasycznego generatora obrysów, wypełnienie " +"szczelin może być również generowane między obrysami, jeśli linia o pełnej " +"szerokości nie może się między nimi zmieścić. To wypełnienie szczelin między " +"obrysami nie jest kontrolowane przez tę opcję.\n" +"\n" +"Jeśli chcesz usunąć wszystkie wypełnienia szczelin, w tym generowane przez " +"klasyczny obrys, ustaw wartość filtra dla małych szczelin na dużą liczbę, na " +"przykład 999999.\n" +"\n" +"Jednak nie jest to zalecane, ponieważ wypełnienie szczelin między obrysami " +"przyczynia się do wytrzymałości modelu. Dla modeli, w których generowane " +"jest nadmierne wypełnienie szczelin między obrysami, lepszą opcją byłoby " +"przełączenie się na generator ścian arachne i użycie tej opcji do " +"kontrolowania, czy kosmetyczne wypełnienie szczelin na górnej i dolnej " +"powierzchni ma być generowane." msgid "Everywhere" msgstr "Wszędzie" msgid "Top and bottom surfaces" -msgstr "Górne i dolne pow." +msgstr "Górne i dolne powierzchnie" msgid "Nowhere" msgstr "Nigdzie" -msgid "Force cooling for overhang and bridge" -msgstr "Wymuszone chłodzenie dla nawisów i mostów" +msgid "Force cooling for overhangs and bridges" +msgstr "Wymuszenie chłodzenia dla nawisów i mostów" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Włącz tę opcję, aby zoptymalizować prędkość wentylatora chłodzącego części " -"dla nawisów i mostów, aby uzyskać lepsze chłodzenie" +"Włącz tę opcję, aby umożliwić regulację prędkości wentylatora chłodzenia " +"części, zwłaszcza dla nawisów oraz mostów wewnętrznych i zewnętrznych. " +"Dostosowanie prędkości wentylatora dla tych elementów może poprawić ogólną " +"jakość druku i zmniejszyć ryzyko odkształceń." -msgid "Fan speed for overhang" -msgstr "Prędkość wentylatora dla nawisów" +msgid "Overhangs and external bridges fan speed" +msgstr "Prędkość wentylatora dla nawisów i zewnętrznych mostów" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Wymuś pracę wentylatora chłodzącego części na tej prędkości podczas " -"drukowania mostu lub ściany nawisającej, która ma duży stopień nawisu. " -"Wymuszanie chłodzenia dla nawisów i mostów może poprawić jakość tych części " -"modelu" +"Ta ustawienie reguluje prędkość wentylatora chłodzenia modelu tylko dla " +"części, gdzie kąt zwisu przekracza wartość określoną w parametrze „Próg " +"włączenia wentylacji dla zwisów”. Zwiększenie prędkości wentylatora dla " +"takich obszarów poprawia jakość ich druku.\n" +"\n" +"Zwróć uwagę: ta prędkość nie może być niższa od wartości „Próg minimalnej " +"prędkości wentylatora”. Jeśli warstwa jest drukowana zbyt szybko (poniżej " +"minimalnego czasu warstwy), prędkość wentylatora automatycznie wzrośnie do " +"wartości „Próg maksymalnej prędkości wentylatora”." -msgid "Cooling overhang threshold" -msgstr "Próg chłodzenia dla nawisów" +msgid "Overhang cooling activation threshold" +msgstr "Próg włączenia wentylacji dla nawisów" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Wymuś pracę wentylatora chłodzącego na określoną prędkość, gdy stopień " -"nawisu drukowanej części przekracza tę wartość. Wyrażone w procentach, co " -"wskazuje, jak duża jest szerokość linii bez podpór z niższej warstwy. 0%% " -"oznacza wymuszanie chłodzenia dla całej zewnętrznej ściany, bez względu na " -"stopień nawisu" +"Kiedy długość nawisającego elementu przekracza określoną wartość progową, " +"wentylator chłodzenia modelu włącza się automatycznie z prędkością ustawioną " +"poniżej w parametrze „Prędkość wentylatora dla nawisów i zewnętrznych " +"mostów”. Wartość podawana jest w procentach i wskazuje, jaka część " +"szerokości linii nie jest podparta przez warstwę od dołu. Jeśli ustawisz " +"wartość 0%, wentylator będzie działał dla wszystkich zewnętrznych ścian, " +"niezależnie od kąta nawisu." -msgid "Bridge infill direction" -msgstr "Kierunek wypełnienia mostu" +msgid "External bridge infill direction" +msgstr "Kierunek wypełnienia zewnętrznych mostów" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Zmiana ustawienia kąta linii mostów. Gdy ustawienie będzie równe 0, kąt " "zostanie wyliczony automatycznie. W przeciwnym wypadku, wybrany kąt będzie " "zastosowany do wszystkich mostów. Aby ustawić kąt na zero, wybierz 180°." -msgid "Bridge density" -msgstr "Gęstość mostu" +msgid "Internal bridge infill direction" +msgstr "Kierunek wypełnienia wewnętrznych mostów" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Gęstość zewnętrznych mostów. 100% oznacza pełne wypełnienie mostu. Domyślnie " -"jest 100%." +"Nadpisanie kąta druku wewnętrznych mostów. Jeśli ustawiono 0, kąt druku " +"mostów jest obliczany automatycznie. W przeciwnym razie będzie używany kąt " +"dla wewnętrznych mostów. Dla kąta zerowego ustaw 180°.\n" +"\n" +"Zaleca się użycie wartości 0, jeśli dla konkretnego modelu nie jest wymagane " +"inne ustawienie." + +msgid "External bridge density" +msgstr "Gęstość zewnętrznych mostów" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Ten parametr kontroluje gęstość (odległość między liniami) zewnętrznych " +"mostów. 100% oznacza pełny most. Domyślnie wynosi 100%.\n" +"\n" +"Zmniejszenie gęstości zewnętrznych mostów może poprawić ich niezawodność, " +"ponieważ zwiększa się przestrzeń do cyrkulacji powietrza wokół wydrukowanych " +"linii mostu, co poprawia jego chłodzenie." + +msgid "Internal bridge density" +msgstr "Gęstość wewnętrznych mostów" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Ten parametr kontroluje gęstość (odległość między liniami) wewnętrznych " +"mostów. 100% oznacza pełny most. Domyślnie wynosi 100%.\n" +"\n" +"Zmniejszenie gęstości wewnętrznych mostów może pomóc zmniejszyć wady wydruku " +"górnej powierzchni oraz poprawić niezawodność wewnętrznych mostów. Osiąga " +"się to poprzez zwiększenie przestrzeni do cyrkulacji powietrza wokół " +"wydrukowanych linii, co przyspiesza ich chłodzenie.\n" +"\n" +"Ustawienie to jest szczególnie skuteczne w połączeniu z drugą warstwą " +"wewnętrznego mostu nad wypełnieniem, co dodatkowo poprawia strukturę " +"wewnętrznych mostów przed nałożeniem pełnej warstwy." msgid "Bridge flow ratio" msgstr "Współczynnik przepływu przy mostach" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Zmniejsz tę wartość minimalnie (na przykład do 0.9), aby zmniejszyć ilość " -"filamentu dla mostu, co zmniejszy jego wygięcie" +"Zmniejsz tę wartość (na przykład do 0.9), aby zredukować ilość materiału " +"używanego do wydruku mostu i poprawić jego stabilność.\n" +"\n" +"Rzeczywisty przepływ materiału dla mostu oblicza się, mnożąc tę wartość " +"przez stosunek przepływu filamentu oraz (jeśli ustawiono) przez stosunek " +"przepływu obiektu." msgid "Internal bridge flow ratio" msgstr "Współczynnik przepływu dla wewnętrznych mostów" @@ -9955,50 +11723,165 @@ msgstr "Współczynnik przepływu dla wewnętrznych mostów" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"Ta wartość określa grubość wewnętrznej warstwy mostu. Jest to pierwsza " -"warstwa nad rzadkim wypełnieniem. Aby poprawić jakość powierzchni nad tym " -"wypełnieniem, możesz zmniejszyć trochę tą wartość (na przykład do 0.9)" +"Ta wartość reguluje grubość wewnętrznej warstwy mostu. Jest to pierwsza " +"warstwa nad rzadkim wypełnieniem. Nieznacznie zmniejsz tę wartość (na " +"przykład 0.9), aby poprawić jakość powierzchni nad rzadkim wypełnieniem.\n" +"\n" +"Rzeczywisty przepływ wewnętrz mostu oblicza się, mnożąc tę wartość przez " +"współczynnik przepływu mostu, współczynnik przepływu filamentu oraz (jeśli " +"jest ustawiony) współczynnik przepływu obiektu." msgid "Top surface flow ratio" msgstr "Współczynnik przepływu górnej powierzchni" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Czynnik ten wpływa na ilość filamentu na górne pełne wypełnienie. Możesz go " -"nieco zmniejszyć, aby uzyskać gładkie wykończenie powierzchni" +"Ten współczynnik wpływa na ilość materiału dla górnego pełnego wypełnienia. " +"Możesz go nieznacznie zmniejszyć, aby uzyskać gładkie wykończenie " +"powierzchni.\n" +"\n" +"Rzeczywisty przepływ górnej powierzchni oblicza się, mnożąc tę wartość przez " +"współczynnik przepływu filamentu oraz (jeśli jest ustawiony) przez " +"współczynnik przepływu obiektu." msgid "Bottom surface flow ratio" msgstr "Współczynnik przepływu dolnej powierzchni" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Ten współczynnik wpływa na ilość materiału dla dolnego pełnego wypełnienia.\n" +"\n" +"Rzeczywisty przepływ dolnego wypełnienia stałego oblicza się, mnożąc tę " +"wartość przez współczynnik przepływu filamentu oraz (jeśli jest ustawiony) " +"przez współczynnik przepływu obiektu." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Ten współczynnik wpływa na ilość materiału w dolnej warstwie pełnego " -"wypełnienia" msgid "Precise wall" msgstr "Ściany o wysokiej precyzji" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Popraw precyzję powłoki poprzez dostosowanie odstępów zewnętrznych ścian. To " -"również poprawia spójność warstw.\n" -"Uwaga: To ustawienie będzie miało wpływ tylko wtedy, gdy sekwencja ściany " -"jest skonfigurowana jako Wewnętrzna-Zewnętrzna." msgid "Only one wall on top surfaces" msgstr "Tylko jedna ściana na górnych powierzchniach" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Użyj tylko jednej ściany na płaskiej górnej powierzchni, aby zapewnić więcej " "miejsca dla wzoru górnego wypełnienia" @@ -10019,9 +11902,9 @@ msgid "" msgstr "" "Jeśli górna powierzchnia ma być drukowana i jest częściowo zakryta inną " "warstwą, nie będzie traktowana jako górna warstwa, jeśli jej szerokość jest " -"mniejsza niż ta wartość. \n" -"Może to być przydatne, aby zapobiec uruchamianiu funkcji 'jeden perymetr na " -"górze' na powierzchni, która powinna być pokryta tylko perymetrami. Ta " +"mniejsza niż ta wartość.\n" +"Może to być przydatne, aby zapobiec uruchamianiu funkcji „jeden perymetr na " +"górze” na powierzchni, która powinna być pokryta tylko perymetrami. Ta " "wartość może być podawana w mm lub jako % szerokości ekstruzji perymetru.\n" "Uwaga: Jeśli ta funkcja jest włączona, mogą pojawić się artefakty, jeśli " "masz na następnej warstwie jakieś cienkie elementy, na przykład litery. " @@ -10032,7 +11915,7 @@ msgstr "Tylko jedna ściana na pierwszej warstwie" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Użyj tylko jednej ściany na pierwszej warstwie, aby dać więcej miejsca na " "wzór dolnego wypełnienia" @@ -10042,37 +11925,37 @@ msgstr "Dodatkowe obrysy na nawisach" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" "Tworzy dodatkowe ścieżeki nad stromymi nawisami i w obszarach, gdzie nie " -"można zakotwiczyć mostów. " +"można zakotwiczyć mostów." -msgid "Reverse on odd" -msgstr "Przeciwny kierunek na nieparzystych warstwach" +msgid "Reverse on even" +msgstr "Zmień kierunek na parzystych" msgid "Overhang reversal" msgstr "Przeciwny kierunek przy nawisach" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Ekstruzja obrysów mających część z nawisem. Będą one drukowane, w przeciwnym " -"kierunku na nieparzystych warstwach. Ten naprzemienny wzór może znacznie " -"poprawić strome nawisy.\n" +"Wydrukuj obwody, które mają swoją część nad nawisem, w przeciwnym kierunku " +"na warstwach parzystych. Taki naprzemienny wzór może znacznie poprawić " +"jakość wydruków z dużymi nawisami.\n" "\n" -"Ustawienie to może również pomóc zmniejszyć deformację części dzięki " -"zmniejszeniu naprężeń w ścianach części." +"Ten parametr może także pomóc w zmniejszeniu odkształceń elementu, ponieważ " +"redukuje napięcia w ściankach wydruku." msgid "Reverse only internal perimeters" msgstr "Przeciwny kierunek tylko dla wewnętrznych obrysów" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10081,24 +11964,24 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Zastosuj logikę przeciwnych obrysów tylko na wewnętrznych obrysach. \n" +"Zastosuj logikę zmiany kierunku tylko do obwodów wewnętrznych.\n" "\n" -"To ustawienie znacznie zmniejsza naprężenia części, ponieważ są one teraz " -"rozdzielone w przemiennych kierunkach. Powinno to zmniejszyć deformację " -"części, jednocześnie zachowując jakość zewnętrznych ścian. Funkcja ta może " -"być bardzo przydatna dla filamentów podatnych na deformację, takich jak ABS/" -"ASA, a także dla elastycznych filamentów, takich jak TPU i Silk PLA. Może to " -"również pomóc zmniejszyć deformację w unoszących się regionach nad " -"podporami.\n" +"Ten parametr znacznie redukuje napięcia działające na elementy, ponieważ są " +"one teraz rozłożone w różnych kierunkach. Powinno to zmniejszyć " +"odkształcenia elementów, zachowując jednocześnie jakość zewnętrznych ścian. " +"Funkcja ta może być szczególnie przydatna dla materiałów podatnych na " +"odkształcenia, takich jak ABS/ASA, a także dla elastycznych filamentów, " +"takich jak TPU i Silk PLA. Może również pomóc w redukcji odkształceń w " +"podpartych obszarach.\n" "\n" -"Aby to ustawienie było najbardziej skuteczne, zaleca się ustawienie Progu " -"Odwrócenia na 0, aby wszystkie wewnętrzne ściany drukowały się w " -"przemiennych kierunkach na nieparzystych warstwach, niezależnie od stopnia " -"nawisu." +"Aby ten parametr był jak najskuteczniejszy, zaleca się ustawienie progu " +"zmiany kierunku na 0, aby wszystkie wewnętrzne ściany były drukowane w " +"naprzemiennych kierunkach na warstwach parzystych, niezależnie od ich " +"stopnia nawisu." msgid "Bridge counterbore holes" msgstr "Mostek dla fazowanych otworów" @@ -10106,9 +11989,9 @@ msgstr "Mostek dla fazowanych otworów" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Ta opcja generuje mostki (wsparcie) dla otworów z fazowaniem, co pozwala na " "ich drukowanie bez konieczności stosowania dodatkowych podpór. Wybierz:\n" @@ -10124,158 +12007,209 @@ msgid "Sacrificial layer" msgstr "Warstwa pomocnicza" msgid "Reverse threshold" -msgstr "Próg odwrócenia" +msgstr "Próg zmiany kierunku" msgid "Overhang reversal threshold" -msgstr "Próg odwrócenia przy nawisach" +msgstr "Próg zmiany kierunku przy nawisach" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Ilość mm, jaką musi mieć nawis, aby odwrócenie było uznane za użyteczne. " -"Może być to % szerokości obryski.\n" -"Wartość 0 umożliwia odwrócenie na każdej nieparzystej warstwie, niezależnie " -"od wszystkiego." - -msgid "Classic mode" -msgstr "Tryb klasyczny" - -msgid "Enable this option to use classic mode" -msgstr "Włącz tę opcję, aby używać trybu klasycznego" +"Minimalna długość nawisu (w mm), przy której zmiana kierunku jest uznawana " +"za użyteczną. Może być również wyrażona jako % szerokości obrysu.\n" +"Wartość 0 powoduje zmianę kierunku na każdej parzystej warstwie, niezależnie " +"od innych ustawień.\n" +"\n" +"Jeśli opcja wykrywanie ściany nawisu jest wyłączona, to ustawienie jest " +"pomijane, a zmiana kierunku następuje na każdej parzystej warstwie." msgid "Slow down for overhang" msgstr "Zwalnienie przy nawisach" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "Włącz tę opcję, aby zwolnić drukowanie dla różnych stopni nawisu" msgid "Slow down for curled perimeters" msgstr "Zwalnienie na łukach" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Włącz tę opcję, aby zwolnić drukowanie w obszarach, gdzie istnieje " -"potencjalne zagrożenie odkształceniem obwodów" +"Włącz tę opcję, aby spowolnić drukowanie w obszarach, gdzie obwody mogą się " +"unosić do góry. Na przykład dodatkowe spowolnienie będzie stosowane podczas " +"drukowania nawisów na ostrych krawędziach, takich jak przód Benchy, co " +"zmniejszy podwijanie (Curling), które kumuluje się w kolejnych warstwach.\n" +"\n" +"Ogólnie zaleca się, aby ta opcja była włączona, chyba że chłodzenie Twojej " +"drukarki jest wystarczająco mocne lub prędkość druku jest wystarczająco " +"wolna, aby to zjawisko nie występowało. Jeśli drukujesz zewnętrzny obwód z " +"wysoką prędkością, ten parametr może wprowadzać niewielkie artefakty podczas " +"spowolnień z powodu dużej zmienności prędkości druku. Jeśli zauważysz " +"artefakty, upewnij się, że Twoje dostosowanie ciśnienia (PA) jest prawidłowo " +"skalibrowane.\n" +"\n" +"Uwaga: Gdy ta opcja jest włączona, obwody nawisów traktowane są jak nawis, " +"co oznacza, że prędkość dla nawisów jest stosowana nawet jeśli unoszący się " +"obwód jest częścią mostu. Na przykład, gdy obwody są w 100% nawisające, bez " +"żadnej podpory pod nimi, zastosowana zostanie prędkość dla nawisu 100%." msgid "mm/s or %" msgstr "mm/s lub %" -msgid "External" -msgstr "Zewn." - -msgid "Speed of bridge and completely overhang wall" -msgstr "Prędkość mostu i całkowicie nawisającej ściany" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Szybkość druku zewnętrznych widocznych obrysów mostu.\n" +"\n" +"Ponadto, jeśli opcja zwalniania na łukach jest wyłączona lub włączony jest " +"klasyczny tryb druku nawisów, to szybkość druku ścian nawisu, które mają " +"wsparcie mniejsze niż 13%, będzie taka sama, niezależnie od tego, czy są " +"częścią mostu, czy nawisu." msgid "Internal" -msgstr "Wewn." +msgstr "Wewnętrzny" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Prędkość wewnętrznego mostu. Jeśli wartość jest wyrażona w procentach, " -"będzie obliczana na podstawie prędkości mostu. Domyślna wartość to 150%." +"Prędkość wewnętrznych mostów. Jeśli wartość jest wyrażona w procentach, " +"będzie obliczana na podstawie prędkości mostu. Wartość domyślna wynosi 150%." msgid "Brim width" -msgstr "Szerokość Brimu" +msgstr "Szerokość brimu" -msgid "Distance from model to the outermost brim line" -msgstr "Odległość od modelu do najbardziej zewnętrznej linii Brimu" +msgid "Distance from model to the outermost brim line." +msgstr "Odległość od modelu do najbardziej zewnętrznej linii brimu" msgid "Brim type" -msgstr "Typ Brimu" +msgstr "Rodzaj brimu" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"To kontroluje generowanie Brimu na zewnętrznej i/lub wewnętrznej stronie " +"To kontroluje generowanie brimu na zewnętrznej i/lub wewnętrznej stronie " "modeli. Auto oznacza, że szerokość Brimu jest analizowana i obliczana " "automatycznie." msgid "Brim-object gap" -msgstr "Odstęp Brimu od obiektu" +msgstr "Odstęp brimu od obiektu" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"Szczelina między najbardziej wewnętrzną linią Brimu a obiektem może ułatwić " -"usunięcie Brimu" +"Szczelina między najbardziej wewnętrzną linią brimu a obiektem może ułatwić " +"usunięcie brimu" msgid "Brim ears" -msgstr "Uszy Brim" +msgstr "Uszy brim" msgid "Only draw brim over the sharp edges of the model." -msgstr "Rysuj Brim tylko na ostrych krawędziach modelu." +msgstr "Rysuj brim tylko na ostrych krawędziach modelu." msgid "Brim ear max angle" -msgstr "Maksymalny kąt uszu Brimu" +msgstr "Maksymalny kąt dla ucha brim" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Maksymalny kąt, przy którym pojawia się ucho Brimu.\n" +"Maksymalny kąt, przy którym pojawia się ucho brimu.\n" "Jeśli ustawione na 0, Brim nie zostanie utworzony.\n" "Jeśli ustawione na ~180, Brim zostanie utworzony wszędzie, oprócz prostych " "sekcji." msgid "Brim ear detection radius" -msgstr "Promień wykrywania uszu Brimu" +msgstr "Promień wykrywania ucha brim" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "Kształt zostanie zredukowany przed wykryciem ostrych kątów. Ten parametr " "wskazuje minimalną długość odchylenia dla redukcji.\n" "0, aby dezaktywować" -msgid "Compatible machine" -msgstr "Kompatybilna maszyna" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "drukarka kompatybilna i wzwyż" -msgid "Compatible machine condition" -msgstr "Warunek kompatybilnej maszyny" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Kompatybilne profile procesów" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Wyrażenie logiczne (Boole'owskie) używające wartości konfiguracji aktywnego " +"profilu drukarki. Jeśli to wyrażenie jest prawdziwe to znaczy, że aktywny " +"profil jest kompatybilny z drukarką." -msgid "Compatible process profiles condition" -msgstr "Warunek kompatybilnych profili procesów" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Wyrażenie logiczne (Boole'owskie) używające wartości konfiguracji aktywnego " +"profilu druku. Jeśli to wyrażenie jest prawdziwe to znaczy, że aktywny " +"profil jest kompatybilny z aktywnym profilem druku." + +msgid "Print sequence, layer by layer or object by object." msgstr "Sekwencja druku, warstwa po warstwie lub obiekt po obiekcie" msgid "By layer" -msgstr "Wg.warstwy" +msgstr "Wg warstwy" msgid "By object" -msgstr "Wg.obiektu" +msgstr "Wg obiektu" msgid "Intra-layer order" msgstr "Kolejność warstw" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" "Kolejność druku obiektów w obrębie jednej warstwy. Domyślnie lub według " "listy obiektów" msgid "As object list" -msgstr "Wg.listy obiektów" +msgstr "Wg listy obiektów" msgid "Slow printing down for better layer cooling" msgstr "Zwolnienie druku dla lepszego chłodzenia warstw" @@ -10284,7 +12218,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Włącz tę opcję, aby zmniejszyć prędkość drukowania, aby czas ostatniej " "warstwy nie był krótszy niż próg czasu warstwy w „Maksymalny próg prędkości " @@ -10296,24 +12230,21 @@ msgstr "Normalne drukowanie" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" -"Domyślne przyspieszenie zarówno normalnego druku, jak i prędkości jałowej, z " +"Domyślne przyspieszenie zarówno normalnego druku, jak i przemieszczenia, z " "wyjątkiem pierwszej warstwy" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Domyślny profil filamentu" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Domyślny profil filamentu przy przełączaniu na ten profil drukarki" msgid "Default process profile" msgstr "Domyślny profil procesu" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Domyślny profil procesu przy przełączaniu na ten profil drukarki" msgid "Activate air filtration" @@ -10327,21 +12258,21 @@ msgid "Fan speed" msgstr "Prędkość wentylatora" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Prędkość wentylatora wyciągowego podczas drukowania. Ta prędkość zastąpi " -"ustawienia prędkości w niestandardowym G-code dla filamentu" +"ustawienia prędkości w niestandardowym G-code dla filamentu." -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Prędkość wentylatora wyciągowego po zakończeniu drukowania" msgid "No cooling for the first" msgstr "Brak chłodzenia na pierwszych" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Wyłącz wszystkie wentylatory chłodzące na pierwszych określonych warstwach. " "Wentylator chłodzący pierwszą warstwę był zazwyczaj wyłączony, aby uzyskać " @@ -10351,15 +12282,15 @@ msgid "Don't support bridges" msgstr "Nie twórz podpór pod mostami" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Nie używaj podpór dla całego obszaru mostu, co powoduje, że podpora jest " "bardzo duża. Most zwykle może być drukowany bezpośrednio bez podpór, jeśli " "nie jest zbyt długi" -msgid "Thick bridges" -msgstr "Grube mosty" +msgid "Thick external bridges" +msgstr "Grube zewnętrzne mosty" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10381,69 +12312,137 @@ msgstr "" "Jeśli włączone, będą używane grube wewnętrzne mosty. Zazwyczaj zaleca się " "użycie tej funkcji. Jednak rozważ jej wyłączenie, jeśli używasz dużych dysz." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Nie filtruj małych wewnętrznych mostów (beta)" +msgid "Extra bridge layers (beta)" +msgstr "Dodatkowe warstwy mostów (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"To opcja może pomóc w redukcji efektu \"pillowing\" na górnych " -"powierzchniach w mocno pochylonych lub zakrzywionych modelach.\n" +"Ta opcja umożliwia tworzenie dodatkowej warstwy mostu nad mostami " +"wewnętrznymi i/lub zewnętrznymi.\n" "\n" -"Domyślnie, małe wewnętrzne mosty są odfiltrowywane, a wewnętrzna struktura " -"jest drukowana bezpośrednio na rzadkiej strukturze wypełnienia. To działa " -"dobrze w większości przypadków, przyspieszając drukowanie bez zbyt dużego " -"kompromisu w jakości górnej powierzchni. \n" +"Dodatkowa warstwa poprawia wygląd i wytrzymałość mostów, co z kolei zwiększa " +"jakość druku kolejnych warstw wypełnienia. Jest to szczególnie przydatne w " +"przypadku szybkich drukarek, gdzie prędkości drukowania mostów i wypełnienia " +"mogą się znacznie różnić. Dodatkowa warstwa zmniejsza również ryzyko " +"powstawania defektu w postaci wybrzuszenia na górnych powierzchniach oraz " +"ogranicza ryzyko odklejania się mostów zewnętrznych od perymetrów.\n" "\n" -"Jednakże w mocno pochylonych lub zakrzywionych modelach, zwłaszcza przy " -"niskiej gęstości struktury wypełnienia, może to prowadzić do wywijania się " -"niewspieranej struktury wypełnienia, co powoduje efekt \"pillowing\".\n" +"Zaleca się ustawienie co najmniej opcji „Dla mostów zewnętrznych”,chyba że " +"występują specyficzne problemy z modelem.\n" "\n" -"Włączenie tej opcji spowoduje drukowanie wewnętrznej warstwy mostka nad " -"nieco niewspieraną wewnętrzną strukturą wypełnienia. Poniższe opcje " -"kontrolują stopień filtrowania, czyli ilość tworzonych wewnętrznych " -"mostków.\n" +"Opcje:\n" "\n" -"Wyłączone - Wyłącza tę opcję. Jest to zachowanie domyślne i działa dobrze w " -"większości przypadków.\n" +"1. Wyłączone – dodatkowa warstwa nie jest generowana. Jest to domyślne " +"ustawienie zapewniające kompatybilność.\n" "\n" -"Ograniczone filtrowanie - Tworzy wewnętrzne mosty na mocno pochylonych " -"powierzchniach, unikając tworzenia niepotrzebnych wewnętrznych mostków. To " -"działa dobrze dla większości trudnych modeli.\n" +"2. Tylko dla mostów zewnętrznych – dodatkowa warstwa jest dodawana tylko do " +"mostów zewnętrznych. Należy pamiętać, że małe mosty, które są krótsze lub " +"węższe niż ustawiona liczba perymetrów, zostaną pominięte, ponieważ druga " +"warstwa nie przyniesie korzyści. Druga warstwa będzie ekstrudowana " +"równolegle do pierwszej, aby zwiększyć wytrzymałość.\n" "\n" -"Brak filtrowania - Tworzy wewnętrzne mosty na każdym potencjalnym " -"wewnętrznym występie. Ta opcja jest przydatna dla mocno pochylonych modeli " -"górnych powierzchni. Jednakże w większości przypadków tworzy zbyt wiele " -"niepotrzebnych mostów." +"3. Tylko dla mostów wewnętrznych – dodatkowa warstwa jest dodawana tylko do " +"mostów wewnętrznych znajdujących się nad rzadkim wypełnieniem. Warto " +"pamiętać, że mosty wewnętrzne są uwzględniane w całkowitej liczbie górnych " +"warstw modelu. Druga warstwa będzie ekstrudowana maksymalnie prostopadle do " +"pierwszej. Jeśli w odizolowanym obszarze warstwy występują mosty o różnych " +"kątach, jako orientacja zostanie wybrany kąt ostatniego obszaru.\n" +"\n" +"4. Dla wszystkich mostów – dodatkowa warstwa jest generowana zarówno dla " +"mostów wewnętrznych, jak i zewnętrznych.\n" msgid "Disabled" msgstr "Wyłączony" +msgid "External bridge only" +msgstr "Tylko zewnętrzne mosty" + +msgid "Internal bridge only" +msgstr "Tylko wewnętrzne mosty" + +msgid "Apply to all" +msgstr "Zastosowanie do wszystkich" + +msgid "Filter out small internal bridges" +msgstr "Filtrowanie małych wewnętrznych mostów" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Ta opcja może pomóc zmniejszyć efekt wybrzuszenia na górnych powierzchniach " +"w mocno nachylonych lub zakrzywionych modelach.\n" +"Domyślnie małe mosty wewnętrzne są filtrowane, a wewnętrzne wypełnienie " +"pełne drukowane jest bezpośrednio nad rzadkim wypełnieniem. Działa to dobrze " +"w większości przypadków, przyspieszając drukowanie bez dużych kompromisów w " +"jakości górnej powierzchni. Jednak w przypadku mocno nachylonych powierzchni " +"lub zakrzywionych modeli, szczególnie przy niskiej gęstości wypełnienia, " +"może to prowadzić do wyginania się niepodpartego wypełnienia pełnego, co " +"skutkuje wybrzuszeniem.\n" +"Włączenie ograniczonego filtrowania lub braku filtrowania spowoduje " +"drukowanie mostów wewnętrznych nad niepodpartym wypełnieniem pełnym. " +"Poniższe opcje kontrolują czułość filtrowania, czyli decydują o tym, gdzie " +"będą tworzone mosty wewnętrzne.\n" +"1. Filtrowanie – włącza tę opcję. Jest to domyślne zachowanie, które działa " +"dobrze w większości przypadków.\n" +"2. Ograniczone filtrowanie – tworzy mosty wewnętrzne na mocno nachylonych " +"powierzchniach, unikając tworzenia niepotrzebnych mostów wewnętrznych. " +"Działa to dobrze w przypadku trudnych modeli.\n" +"3. Brak filtrowania – tworzy mosty wewnętrzne nad każdym potencjalnym " +"wewnętrznym występem. Ta opcja jest przydatna w przypadku modeli o mocno " +"nachylonych górnych powierzchniach, ale w większości przypadków tworzy zbyt " +"wiele zbędnych mostów." + msgid "Limited filtering" msgstr "Ograniczona filtracja" @@ -10465,20 +12464,20 @@ msgstr "" msgid "End G-code" msgstr "Końcowy G-code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Końcowy G-code po zakończeniu całego druku" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "G-code między obiektami" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Wstaw G-code między obiektami. Ten parametr będzie miał wpływ tylko wtedy, " -"gdy drukujesz swoje modele obiekt po obiekcie" +"gdy drukujesz swoje modele obiekt po obiekcie." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Końcowy G-code po zakończeniu drukowania tym filamentem" msgid "Ensure vertical shell thickness" @@ -10519,24 +12518,24 @@ msgstr "Umiarkowane" msgid "Top surface pattern" msgstr "Wzór górnej powierzchni" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Wzór linii wypełnienia górnej powierzchni" -msgid "Concentric" -msgstr "Koncentryczny" - -msgid "Rectilinear" -msgstr "Prostoliniowy" - msgid "Monotonic" msgstr "Monotoniczny" msgid "Monotonic line" msgstr "Linia monotoniczna" +msgid "Rectilinear" +msgstr "Prostoliniowy" + msgid "Aligned Rectilinear" msgstr "Wyrównany prostoliniowy" +msgid "Concentric" +msgstr "Koncentryczny" + msgid "Hilbert Curve" msgstr "Krzywa Hilberta" @@ -10549,7 +12548,7 @@ msgstr "Spirala oktagramu" msgid "Bottom surface pattern" msgstr "Wzór dolnej powierzchni" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" "Wzór linii wypełnienia dolnej powierzchni, nie dotyczy wypełnienia mostu" @@ -10597,17 +12596,17 @@ msgid "Small perimeters threshold" msgstr "Próg małego obrysu" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "To ustawia próg długości małych obrysów. Domyślny próg to 0 mm" msgid "Walls printing order" msgstr "Kolejność drukowania ścian" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10617,25 +12616,23 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" "Sekwencja druku zewnętrznych i wewnętrznych ścian.\n" "\n" -"Użyj opcji \"wewnętrzna/zewnętrzna\" dla najlepszego efektu nawisów. Jest to " +"Użyj opcji „wewnętrzna/zewnętrzna” dla najlepszego efektu nawisów. Jest to " "spowodowane tym, że ściany zwisające mogą przylegać do sąsiednich obwodów " "podczas drukowania. Jednakże, opcja ta skutkuje delikatnie obniżoną jakością " "powierzchni, ponieważ zewnętrzny obrys jest deformowany przez ścianę " "wewnętrzną, która jest do niej dociskana.\n" "\n" -"Użyj opcji \"wewnętrzna/zewnętrzna/wewnętrzna\" dla najlepszego wykończenia " +"Użyj opcji „wewnętrzna/zewnętrzna/wewnętrzna” dla najlepszego wykończenia " "zewnętrznej powierzchni i dokładności wymiarowej, ponieważ zewnętrzna ściana " "jest drukowana niezakłócona przez wewnętrzny obwód. Jednak wydajność druku " "przy nawisach będzie niższa, ponieważ nie ma wewnętrznego obwodu, który " @@ -10645,20 +12642,19 @@ msgstr "" "pierwszy wewnętrzny obwód. W większości przypadków ta opcja jest polecana " "jako alternatywa dla opcji zewnętrzna/wewnętrzna.\n" "\n" -"Użyj opcji \"zewnętrzna/wewnętrzna\", aby uzyskać taką samą jakość " -"zewnętrznej ściany i precyzję wymiarową jak w opcji \"wewnętrzna/zewnętrzna/" -"wewnętrzna\". Jednakże, szwy na osi Z będą wydawać się mniej spójne, " -"ponieważ pierwsza ekstruzja nowej warstwy rozpoczyna się na widocznej " -"powierzchni." +"Użyj opcji „zewnętrzna/wewnętrzna”, aby uzyskać taką samą jakość zewnętrznej " +"ściany i precyzję wymiarową jak w opcji „wewnętrzna/zewnętrzna/wewnętrzna”. " +"Jednakże, szwy na osi Z będą wydawać się mniej spójne, ponieważ pierwsza " +"ekstruzja nowej warstwy rozpoczyna się na widocznej powierzchni." msgid "Inner/Outer" -msgstr "Wewnętrzna/Zewnętrzna" +msgstr "Wewnętrzna/zewnętrzna" msgid "Outer/Inner" -msgstr "Zewnętrzna/Wewnętrzna" +msgstr "Zewnętrzna/wewnętrzna" msgid "Inner/Outer/Inner" -msgstr "Wewnętrzna/Zewnętrzna/Wewnętrzna" +msgstr "Wewnętrzna/zewnętrzna/wewnętrzna" msgid "Print infill first" msgstr "Drukuj najpierw wypełnienie" @@ -10668,7 +12664,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10683,30 +12679,26 @@ msgstr "" "zewnętrzne powierzchnie części." msgid "Wall loop direction" -msgstr "Kierunek obwodu ściany" +msgstr "Kierunek pętli ściany" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"Kierunek, w którym są drukowane obwody ściany, patrząc z góry.\n" +"Kierunek, w którym wytłaczane są pętle ścian, patrząc z góry.\n" "\n" -"Domyślnie wszystkie ściany są drukowane w kierunku przeciwnym do ruchu " -"wskazówek zegara, chyba że włączona jest opcja Odwróć dla nieparzystych " -"warstw.Ustawienie tego na dowolną inną opcję niż Auto spowoduje, że kierunek " -"ściany będzie ustalony niezależnie od ustawienia Odwróć dla nieparzystych.\n" +"Domyślnie wszystkie ściany są wytłaczane w kierunku przeciwnym do ruchu " +"wskazówek zegara, chyba że opcja Zmień kierunek na parzystych jest włączona. " +"Ustawienie tej opcji na coś innego niż Auto wymusi kierunek ściany, " +"niezależnie od ustawienia Odwróć na parzystych.\n" "\n" -"Ta opcja będzie wyłączona, jeśli aktywowany jest tryb Wazy.\n" -"\n" -"Opcie:\n" -"Przeciwnie (przeciwnie do ruchu wskazówek zegara)\n" -"Zgodnie (zgodnie z ruchem wskazówek zegara)" +"Ta opcja będzie wyłączona, jeśli tryb Wazy jest włączony." msgid "Counter clockwise" msgstr "Przeciwnie" @@ -10814,10 +12806,13 @@ msgstr "" "Ta opcja określa dodatkową odległość, o którą ma być rozszerzony adaptacyjny " "obszar siatki stołu w kierunkach XY." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Kolor extrudera" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Używane tylko jako wizualna pomoc w interfejsie użytkownika" msgid "Extruder offset" @@ -10827,32 +12822,180 @@ msgid "Flow ratio" msgstr "Współczynnik przepływu" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Materiał może ulegać zmianie objętościowej po przejściu między stanem " "ciekłym a krystalicznym. Ustawienie to proporcjonalnie zmienia przepływ " "ekstruzji tego filamentu w G-code. Zalecany zakres wartości mieści się " "między 0,95 a 1,05. Być może możesz dostroić tę wartość, aby uzyskać gładką " -"powierzchnię, gdy występuje lekkie przelewanie lub niedomiar" +"powierzchnię, gdy występuje lekkie przelewanie lub niedomiar." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Materiał może mieć zmiany objętości po przejściu między stanem ciekłym a " +"stanem krystalicznym. Ta opcja zmienia proporcjonalnie cały przepływ " +"wytłaczania filamentu w G-code. Zalecany zakres wartości to od 0,95 do 1,05. " +"Może warto dostosować tę wartość, aby uzyskać ładną, gładką powierzchnię, " +"gdy występuje niewielkie przepełnienie lub niedobór.\n" +"\n" +"Ostateczny współczynnik przepływu dla obiektu to ta wartość pomnożona przez " +"współczynnik przepływu filamentu." msgid "Enable pressure advance" msgstr "Włącz wzrost ciśnienia (PA)" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" "Włącz wzrost ciśnienia (PA), wynik automatycznej kalibracji zostanie " "nadpisany po włączeniu." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Pressure advance (Klipper), znane również jako współczynnik przyspieszenia " -"liniowego (Marlin)." +"Pressure advance (Klipper), znane również jako Linear advance (Marlin)." + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Włącz adaptacyjny wzrost ciśnienia (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Wraz ze wzrostem prędkości druku zaobserwowano, że efektywna wartość PA " +"zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w 100% " +"optymalna dla wszystkich elementów i zwykle stosowana jest wartość " +"kompromisowa, która nie powoduje zbyt dużego „wypuklenia” na elementach " +"drukowanych wolniej, a jednocześnie nie powoduje przerw na elementach " +"drukowanych szybciej.\n" +"\n" +"Ta funkcja ma na celu rozwiązanie tego ograniczenia poprzez modelowanie " +"reakcji ekstrudera w zależności od prędkości drukowania. Wewnętrznie " +"generuje dopasowany model, który może przewidzieć jakie będzie wymagane " +"ciśnienie dla dowolnej prędkości drukowania, który jest następnie " +"przekazywany do drukarki w zależności od bieżącej prędkości druku.\n" +"\n" +"Po włączeniu powyższa wartość PA jest nadpisywana. Zdecydowanie zaleca się " +"jednak przyjęcie rozsądnej wartości domyślnej, która będzie działać jako " +"rozwiązanie awaryjne w przypadku nieprawidłowych obliczeń dla modelu.\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Adaptacyjny pomiar ciśnienia (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"0.033.96.1000\n" +"0.029.7.91.300\n" +"0.026.7.91.1000\n" +"\n" +"Jak kalibrować:\n" +"1. Przeprowadzić test wyprzedzenia ciśnienia dla co najmniej 3 prędkości na " +"wartość przyspieszenia. Zaleca się przeprowadzenie testu co najmniej dla " +"prędkości obwodów zewnętrznych, prędkości obwodów wewnętrznych i najszybszej " +"prędkości drukowania elementów w profilu (zwykle jest to rzadkie lub pełne " +"wypełnienie). Następnie uruchom je z tymi samymi prędkościami, aby uzyskać " +"najwolniejsze i najszybsze przyspieszenia druku i nie szybciej niż zalecane " +"maksymalne przyspieszenie określone przez moduł kształtujący wejściowy " +"klipper.\n" +"2. Zwróć uwagę na optymalną wartość PA dla każdej wolumetrycznej prędkości " +"przepływu i przyspieszenia. Możesz znaleźć numer przepływu, wybierając " +"przepływ z rozwijanego schematu kolorów i przesuwając poziomy suwak nad " +"liniami wzoru PA. Numer powinien być widoczny na dole strony. Idealna " +"wartość PA powinna maleć, im większy jest przepływ objętościowy. Jeśli tak " +"nie jest, potwierdź, że ekstruder działa poprawnie. Im wolniej i z mniejszym " +"przyspieszeniu drukujesz, tym jest większy zakres dopuszczalnych wartości " +"PA. Jeśli różnica nie jest widoczna, należy użyć wartości PA z szybszego " +"testu.\n" +"3. Wprowadź trójki wartości PA, przepływu i przyspieszenia w polu tekstowym " +"tutaj i zapisz swój profil filamentu." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Włącz adaptacyjny wzrost ciśnienia dla nawisów (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Włącz adaptacyjne PA zarówno dla nawisów, jak i gdy zmienia się przepływ w " +"obrębie tego samego elementu. Jest to opcja eksperymentalna, ponieważ jeśli " +"profil PA nie jest ustawiony dokładnie, spowoduje to problemy z " +"jednorodnością na zewnętrznych powierzchniach przed i po nawisach.\n" + +msgid "Pressure advance for bridges" +msgstr "Wzrost ciśnienia (PA) dla mostów" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Wartość wzrostu ciśnienia dla mostów. Ustaw na 0, aby wyłączyć.\n" +"\n" +"Niższa wartość PA podczas drukowania mostów pomaga zredukować widoczność " +"lekkiego niedoboru materiału, który może wystąpić bezpośrednio po ich " +"wydruku. Jest to spowodowane spadkiem ciśnienia w dyszy podczas drukowania w " +"powietrzu, a niższy PA pomaga temu przeciwdziałać." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " @@ -10865,8 +13008,9 @@ msgid "Keep fan always on" msgstr "Wentylator zawsze włączony" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Jeśli włączysz to ustawienie, wentylator chłodzący części nigdy nie zostanie " "zatrzymany i będzie pracował przynajmniej z minimalną prędkością, aby " @@ -10879,23 +13023,20 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "Jeśli ta opcja jest włączona, zapewni to, że zewnętrzne obwody nie będą " "spowalniane, aby spełnić minimalny czas warstwy. Jest to szczególnie pomocne " "w poniższych sytuacjach:\n" -"\n" "1. Aby uniknąć zmian połysku podczas drukowania filamentami z połuskiem.\n" "2. Aby uniknąć zmian prędkości zewnętrznych ścian, które mogą powodować " "drobne artefakty ścian, przypominające zygzaki.\n" "3. Aby uniknąć drukowania z prędkościami, które powodują powstawanie " -"drobnych artefaktów (VFA) na zewnętrznych ścianach.\n" +"drobnych artefaktów (VFA) na zewnętrznych ścianach." msgid "Layer time" msgstr "Czas warstwy" @@ -10903,7 +13044,7 @@ msgstr "Czas warstwy" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Wentylator chłodzący części zostanie włączony dla warstw, których szacowany " "czas jest krótszy niż ta wartość. Prędkość wentylatora jest interpolowana " @@ -10913,8 +13054,10 @@ msgstr "" msgid "Default color" msgstr "Domyślny kolor" -msgid "Default filament color" -msgstr "Domyślny kolor filamentu" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Uwagi do filamentu" @@ -10932,47 +13075,112 @@ msgstr "" "Minimalna twardość dyszy HRC wymagana do druku filamentu. Zero oznacza brak " "sprawdzania twardości HRC dyszy." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "To ustawienie określa, ile objętości filamentu może być stopione i " "wyciśnięte na sekundę. Prędkość drukowania jest ograniczana przez maksymalną " "prędkość przepływu, w przypadku zbyt wysokiego i nierealistycznego " "ustawienia prędkości. Nie może wynosić zero" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Czas ładowania filamentu" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Czas ładowania nowego filamentu podczas zmiany filamentu. Tylko do celów " -"statystycznych" +"Czas na załadowanie nowego filamentu przy jego zmianie. Zwykle dotyczy to " +"maszyn wielomateriałowych z jednym ekstruderem. Dla maszyn z wymiennym " +"narzędziem lub maszyn wielonarzędziowych zazwyczaj wynosi 0. Tylko do " +"statystyk." msgid "Filament unload time" msgstr "Czas rozładowania filamentu" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Czas rozładunku poprzedniego filamentu podczas zmiany filamentu. Tylko do " -"celów statystycznych" +"Czas na rozładowanie starego filamentu przy jego zmianie. Zwykle dotyczy to " +"maszyn wielomateriałowych z jednym ekstruderem. Dla maszyn z wymiennym " +"narzędziem lub maszyn wielonarzędziowych zazwyczaj wynosi 0. Tylko do " +"statystyk." + +msgid "Tool change time" +msgstr "Czas zmiany narzędzia" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Czas potrzebny na zmianę narzędzia. Zwykle dotyczy to maszyn z wymiennym " +"narzędziem lub maszyn wielonarzędziowych. Dla maszyn wielomateriałowych z " +"jednym ekstruderem zazwyczaj wynosi 0. Tylko do statystyk." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Średnica filamentu jest używana do obliczania ekstruzji w G-code, więc jest " -"bardzo ważna i powinna być dokładna" +"bardzo ważna i powinna być dokładna." msgid "Pellet flow coefficient" msgstr "Współczynnik przepływu granulatu" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10988,13 +13196,25 @@ msgstr "" "\n" "średnica_filamentu = sqrt( (4 * współczynnik_przepływu_granulatu) / PI )" -msgid "Shrinkage" -msgstr "Skurcz" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Skurcz (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -11005,6 +13225,25 @@ msgstr "" "Upewnij się, że pozostawiłeś wystarczająco dużo miejsca między obiektami, " "ponieważ ta kompensacja jest wykonywana po przeprowadzeniu kontroli." +msgid "Shrinkage (Z)" +msgstr "Skurcz (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Wprowadź procent skurczu, jaki filament uzyska po schłodzeniu (94%, jeśli " +"mierzysz 94 mm zamiast 100 mm). Część będzie skalowana w osi Z, aby to " +"zrekompensować." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "Prędkość ładowania" @@ -11021,7 +13260,7 @@ msgid "Unloading speed" msgstr "Prędkość rozładowania" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Prędkość stosowana do usuwania filamentu na wieży czyszczącej (nie ma wpływu " @@ -11040,8 +13279,8 @@ msgid "Delay after unloading" msgstr "Opóźnienie po rozładowaniu" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Czas bezczynności po rozładowaniu filamentu. Może pomóc w bezproblemowej " @@ -11059,6 +13298,25 @@ msgstr "" "Filament jest chłodzony poprzez poruszanie go tam i z powrotem w ruchach " "chłodzących. Określ pożądaną liczbę tych ruchów." +msgid "Stamping loading speed" +msgstr "Prędkość kształtowania podczas ładowania" + +msgid "Speed used for stamping." +msgstr "Prędkość używana do kształtowania." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Odległość kształtowania mierzona od środka rurki chłodzącej" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Jeśli ustawisz wartość inną niż zero, filament jest przesuwany w kierunku " +"dyszy pomiędzy poszczególnymi ruchami chłodzenia (kształtowanie lub " +"stamping). Ta opcja konfiguruje czas trwania tego ruchu przed ponowną " +"retrakcją filamentu." + msgid "Speed of the first cooling move" msgstr "Prędkość pierwszego ruchu chłodzącego" @@ -11088,15 +13346,6 @@ msgstr "Prędkość ostatniego ruchu chłodzącego" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Ruchy chłodzące stopniowo przyspieszają do tej prędkości." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Czas, który drukarka (lub dodatek Multi Material 2.0) poświęca na ładowanie " -"nowego filamentu podczas zmiany narzędzia (przy wykonywaniu kodu T). Ten " -"czas jest dodawany do szacowanego czasu druku." - msgid "Ramming parameters" msgstr "Parametry wyciskania" @@ -11107,23 +13356,14 @@ msgstr "" "Ten ciąg jest edytowany przez RammingDialog i zawiera parametry właściwe dla " "wyciskania." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Czas, który drukarka (lub dodatek Multi Material 2.0) poświęca na " -"rozładowanie nowego filamentu podczas zmiany narzędzia (przy wykonywaniu " -"kodu T). Ten czas jest dodawany do szacowanego czasu druku." - -msgid "Enable ramming for multitool setups" -msgstr "Włącz wbijanie dla konfiguracji wielonarzędziowych" +msgid "Enable ramming for multi-tool setups" +msgstr "Włącz wyciskanie przy multi-tool" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Wykonuj raming podczas korzystania z drukarki wieloinstrumentowej (tj. gdy " "opcja „Pojedynczy extruder wielomateriałowy” w ustawieniach drukarki jest " @@ -11131,55 +13371,66 @@ msgstr "" "wytłaczana na wieżę czyszczącą tuż przed zmianą narzędzia. Ta opcja jest " "używana tylko wtedy, gdy wieża czyszcząca jest włączona." -msgid "Multitool ramming volume" -msgstr "Objętość ramingu wieloinstrumentowego" +msgid "Multi-tool ramming volume" +msgstr "Objętość wyciskania multi-tool" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Objętość do wyciśnięcia przed zmianą narzędzia." -msgid "Multitool ramming flow" -msgstr "Przepływ ramingu wieloinstrumentowego" +msgid "Multi-tool ramming flow" +msgstr "Przepływ wyciskania multi-tool" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "Przepływ używany do ramingu filamentu przed zmianą narzędzia." msgid "Density" msgstr "Gęstość" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Gęstość filamentu. Tylko do celów statystycznych" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Typ filamentu" msgid "Soluble material" msgstr "Materiał rozpuszczalny" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Materiał rozpuszczalny jest powszechnie używany do drukowania podpór i " "warstw łączących podpory z modelem" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Materiał podporowy" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Materiał podporowy jest powszechnie używany do drukowania podpór i warstw " "łączących podpory z modelem" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Temperatura mięknięcia" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Materiał mięknie w tej temperaturze, więc gdy temperatura stołu jest równa " "lub wyższa, zaleca się otwarcie drzwi przednich i/lub usunięcie górnej " @@ -11188,7 +13439,7 @@ msgstr "" msgid "Price" msgstr "Cena" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Cena filamentu. Tylko do celów statystycznych" msgid "money/kg" @@ -11197,7 +13448,7 @@ msgstr "zł/kg" msgid "Vendor" msgstr "Dostawca" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Dostawca filamentu. Tylko do celów prezentacyjnych" msgid "(Undefined)" @@ -11208,7 +13459,7 @@ msgstr "Kierunek wzoru wypełnienia" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Kąt dla wzoru wypełnienia, który kontroluje początek lub główny kierunek " "linii" @@ -11218,65 +13469,137 @@ msgstr "Kierunek wzoru pełnego wypełnienia" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "Kąt wyznaczający główny kierunek linii dla wzoru pełnego wypełnienia" -msgid "Rotate solid infill direction" -msgstr "Zmień kierunek pełnego wypełnienia" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Zmień kierunek pełnego wypełnienia o 90° dla każdej warstwy." - msgid "Sparse infill density" msgstr "Gęstość wypełnienia" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" +"Gęstość wewnętrznego rzadkiego wypełnienia, 100% przekształca całe rzadkie " +"wypełnienie w wypełnienie pełne, a użyty zostanie wzór wewnętrznego pełnego " +"wypełnienia" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" -"Gęstość wewnętrznego wypełnienia, 100% przekształca całe rzadkie wypełnienie " -"w wypełnienie pełne, a użyty zostanie wzór wewnętrznego pełnego wypełnienia" msgid "Sparse infill pattern" msgstr "Wzór wypełnienia" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Wzór dla wewnętrznego wypełnienia" -msgid "Grid" -msgstr "Kratka" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Linie" -msgid "Cubic" -msgstr "Sześcienny" +msgid "Grid" +msgstr "Siatka" msgid "Tri-hexagon" msgstr "Trójkątne" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Plaster miodu" +msgid "Cubic" +msgstr "Sześcienny" msgid "Adaptive Cubic" msgstr "Sześcian adaptacyjny" -msgid "3D Honeycomb" -msgstr "3D Plaster miodu" +msgid "Quarter Cubic" +msgstr "Ćwierćsześcienny" msgid "Support Cubic" msgstr "Sześcian podparty" msgid "Lightning" -msgstr "Piorun" +msgstr "Błyskawica" + +msgid "Honeycomb" +msgstr "Plaster miodu" + +msgid "3D Honeycomb" +msgstr "Plaster miodu 3D" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "Siatka 2D" msgid "Cross Hatch" msgstr "Krzyżowy podparty" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroidalny" + +msgid "Lateral lattice angle 1" +msgstr "Kąt siatki 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Kąt nachylenia pierwszej linii dla wzorca wypełnienia „siatka 2D” względem " +"osi Z. Zero oznacza pionową." + +msgid "Lateral lattice angle 2" +msgstr "Kąt siatki 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Kąt nachylenia drugiej linii dla wzorca wypełnienia \"2D siatka\" względem " +"osi Z." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "Długość kotwiczenia wypełnienia" @@ -11288,7 +13611,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11300,7 +13623,7 @@ msgstr "" "określony parametr, linia wypełnienia zostanie połączona z segmentem obrysu " "tylko z jednej strony. Długość tego segmentu zostanie ograniczona do " "wartości określonej w parametrze infill_anchor, ale nie przekroczy tej " -"wartości. \n" +"wartości.\n" "Aby wyłączyć funkcję kotwiczenia, należy ustawić wartość na zero. Ustaw " "zero, aby wyłączyć kotwiczenie obrysów do pojedynczej linii wypełnienia." @@ -11321,7 +13644,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11339,23 +13662,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "0 (bez przymocowania)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Przyspieszenie na zewnętrznych ścianach" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Przyspieszenie na wewnętrznych ścianach" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Przyspieszenie ruchów podróżnych" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Przyspieszenie dla wypełnienia górnej powierzchni. Użycie niższej wartości " "może poprawić jakość górnej powierzchni" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Przyspieszenie na zewnętrznej ścianie. Użycie niższej wartości może poprawić " "jakość" @@ -11389,7 +13712,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Przyspieszenie dla pierwszej warstwy. Użycie niższej wartości może poprawić " "przyczepność do stołu" @@ -11397,7 +13720,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Włącz accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" "Maksymalne przyspieszenie hamowania Klippera zostanie dostosowane " "automatycznie" @@ -11407,28 +13730,39 @@ msgstr "Dopasuj przyspieszenie przed zmianą kierunku" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" "Maksymalne przyspieszenie hamowania Klippera zostanie dostosowane do tego %% " "przyspieszenia" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk zewnętrznych ścian" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk wewnętrznych ścian" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Jerk dla górnej powierzchni" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Jerk dla wypełnienia" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Jerk pierwszej warstwy" -msgid "Jerk for travel" -msgstr "Jerk ruchu jałowego" +msgid "Jerk for travel." +msgstr "Jerk przemieszczenia" msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " @@ -11442,25 +13776,25 @@ msgstr "Wysokość pierwszej warstwy" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Wysokość pierwszej warstwy. Nieznaczne zwiększenie grubości pierwszej " "warstwy może poprawić przyczepność do stołu" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Prędkość pierwszej warstwy z wyjątkiem pełnego wypełnienia" msgid "Initial layer infill" msgstr "Wypełnienie pierwszej warstwy" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Prędkość pełnego wypełnienia na pierwszej warstwie" msgid "Initial layer travel speed" -msgstr "Prędkość jałowa pierwszej warstwy" +msgstr "Prędkość przemieszczenia pierwszej warstwy" -msgid "Travel speed of initial layer" -msgstr "Prędkość jałowa dla pierwszej warstwy" +msgid "Travel speed of initial layer." +msgstr "Prędkość przemieszczenia dla pierwszej warstwy" msgid "Number of slow layers" msgstr "Liczba warstw o niższej prędkości" @@ -11475,7 +13809,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Temperatura dyszy dla pierwszej warstwy" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" "Temperatura dyszy do drukowania pierwszej warstwy przy użyciu tego filamentu" @@ -11490,10 +13824,10 @@ msgid "" "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie " -"\"close_fan_the_first_x_layers\" do maksymalnej na warstwie " -"\"full_fan_speed_layer\". Jeśli \"full_fan_speed_layer\" jest niższa niż " -"\"close_fan_the_first_x_layers\", to wentylator będzie pracować z maksymalną " -"dozwoloną prędkością na warstwie \"close_fan_the_first_x_layers\" + 1." +"„close_fan_the_first_x_layers” do maksymalnej na warstwie " +"„full_fan_speed_layer”. Jeśli „full_fan_speed_layer” jest niższa niż " +"„close_fan_the_first_x_layers”, to wentylator będzie pracować z maksymalną " +"dozwoloną prędkością na warstwie „close_fan_the_first_x_layers” + 1." msgid "layer" msgstr "warstwa" @@ -11502,23 +13836,54 @@ msgid "Support interface fan speed" msgstr "Prędkość wentylatora dla warstwy łączącej podpory" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"Prędkość wentylatora chłodzenia części stosowana podczas drukowania podpory. " +"Ustawienie tego parametru na wyższą prędkość niż normalna zmniejsza siłę " +"wiązania warstw między podporą a częścia, co ułatwia ich oddzielanie. Ustaw " +"na -1, aby wyłączyć tę opcję. To ustawienie jest nadpisywane przez " +"disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Prędkość wentylatora dla mostów wewnętrznych" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Prędkość wentylatora chłodzącego dla wszystkich mostów wewnętrznych. Ustaw " +"-1, aby użyć ustawień wentylatora dla nawisów.\n" +"\n" +"Zmniejszenie prędkości wentylatora dla mostów wewnętrznych w porównaniu do " +"standardowej prędkości wentylatora może pomóc w ograniczeniu odkształceń " +"elementu spowodowanych nadmiernym chłodzeniem dużej powierzchni przez " +"dłuższy czas." + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"Ta prędkość wentylatora jest narzucana podczas drukowania wszystkich warstw " -"łączących podpory,\n" -"aby osłabić ich wiązanie przy wyższej prędkości wentylatora. Ustaw na -1, " -"aby wyłączyć to narzucenie.\n" -"Można to nadpisać tylko za pomocą opcji disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Losowe wibracje podczas drukowania ścian, aby nadać powierzchni chropowaty " -"wygląd.To ustawienie reguluje \"chropowatość\"" +"wygląd. To ustawienie reguluje „chropowatość”" msgid "Contour" msgstr "Kontur" @@ -11530,30 +13895,133 @@ msgid "All walls" msgstr "Wszystkie ściany" msgid "Fuzzy skin thickness" -msgstr "Grubość skóry Fuzzy" +msgstr "Grubość skóry fuzzy" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"Szerokość w granicach której występuje drganie. Zaleca się, aby była poniżej " -"szerokości linii zewnętrznej ściany." +"Szerokość w granicach której występuje rozmycie. Zaleca się, aby była " +"poniżej szerokości linii zewnętrznej ściany." msgid "Fuzzy skin point distance" -msgstr "Odstęp między punktami na skórze Fuzzy" +msgstr "Odstęp między punktami skóry fuzzy" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Średnia odległość między losowymi punktami wprowadzonymi na każdym odcinku " "linii" msgid "Apply fuzzy skin to first layer" -msgstr "Zastosuj skórę Fuzzy na pierwszej warstwie" +msgstr "Skóra fuzzy na pierwszej warstwie" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Czy chcesz zastosować skórę Fuzzy już od pierwszej warstwy" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Określa czy zastosować skórę fuzzy od pierwszej warstwy" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Połączony" + +msgid "Fuzzy skin noise type" +msgstr "Rodzaj szumu skóry fuzzy" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Określa rodzaj szumu używanego do generowania skóry fuzzy.\n" +"Klasyczny: klasyczny, jednolity, losowy szum.\n" +"Perlin: szum Perlina, który zapewnia bardziej spójną teksturę.\n" +"Billow: podobny do szumu Perlina, ale bardziej toporny.\n" +"Pofałdowany multifraktal: szum falisty z ostrymi, postrzępionymi elementami. " +"Tworzy tekstury przypominające marmur.\n" +"Voronoi: dzieli powierzchnię na komórki Woronoja i przesuwa każdą z nich o " +"losową wartość. Tworzy teksturę patchworkową." + +msgid "Classic" +msgstr "Klasyczny" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Pofałdowany multifraktal" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Rozmiar cechy skóry fuzzy" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Określa w mm rozmiar bazowy cech koherentnego szumu. Wyższe wartości dadzą w " +"wyniku większe cechy." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Liczba oktaw szumu skóry fuzzy" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Określa liczbę używanych oktaw koherentnego szumu. Wyższe wartości " +"zwiększają szczegółowość szumu, ale również zwiększają czas obliczeń." + +msgid "Fuzzy skin noise persistence" +msgstr "Trwałość szumu skóry fuzzy" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Określa szybkość zaniku dla wyższych oktaw koherentnego szumu. Niższe " +"wartości spowodują wygładzenie szumu." msgid "Filter out tiny gaps" msgstr "Filtruj wąskie szczeliny" @@ -11561,12 +14029,18 @@ msgstr "Filtruj wąskie szczeliny" msgid "Layers and Perimeters" msgstr "Warstwy i obwody" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtruj szczeliny mniejsze niż podany próg" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Nie drukuj wypełnienia szczelin, których długość jest mniejsza niż określony " +"próg (w mm). Ustawienie to dotyczy górnego i dolnego pełnego wypełnienia " +"oraz, gdy używany jest klasyczny generator ścian." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Prędkość wypełniania szczelin. Przerwa zazwyczaj ma nieregularną szerokość " "linii i powinna być drukowana wolniej" @@ -11575,7 +14049,7 @@ msgid "Precise Z height" msgstr "Precyzyjna wysokość Z" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11589,9 +14063,9 @@ msgstr "Dopasowanie łuków" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11609,15 +14083,16 @@ msgstr "" msgid "Add line number" msgstr "Dodaj numer linii" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" -msgstr "Włącz to, aby dodać numer linii (Nx) na początku każdej linii G-Code" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." +msgstr "Włącz to, aby dodać numer linii (Nx) na początku każdej linii G-Code." msgid "Scan first layer" msgstr "Skanuj pierwszą warstwę" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Włącz to, aby włączyć kamerę w drukarce do sprawdzania jakości pierwszej " "warstwy" @@ -11627,7 +14102,7 @@ msgstr "Typ dyszy" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Materiał metalu dyszy. Określa on odporność na ścieranie dyszy oraz rodzaj " "filamentu, który można drukować" @@ -11641,6 +14116,9 @@ msgstr "Stal hartowana" msgid "Stainless steel" msgstr "Stal nierdzewna" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Mosiądz" @@ -11660,7 +14138,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Struktura drukarki" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Fizyczna konstrukcja i komponenty urządzenia do druku" msgid "CoreXY" @@ -11694,10 +14172,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Uruchom wentylator na określoną liczbę sekund wcześniej niż planowany czas " @@ -11709,7 +14187,7 @@ msgstr "" "(działają one jak rodzaj bariery).\n" "\n" "Nie spowoduje to również zmiany ustawień wentylatora w początkowym G-code, " -"jeśli aktywowana jest opcja \"tylko niestandardowy początkowy G-code\".\n" +"jeśli aktywowana jest opcja „tylko niestandardowy początkowy G-code”.\n" "\n" "Ustaw 0, aby wyłączyć tę funkcję." @@ -11741,7 +14219,7 @@ msgstr "" msgid "Time cost" msgstr "Koszt czasu" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "Koszt drukarki za godzinę" msgid "money/h" @@ -11771,8 +14249,8 @@ msgstr "" msgid "G-code flavor" msgstr "Rodzaj G-code" -msgid "What kind of gcode the printer is compatible with" -msgstr "Z jakim rodzajem G-code drukarka jest kompatybilna" +msgid "What kind of G-code the printer is compatible with." +msgstr "Z jakim rodzajem G-code drukarka jest kompatybilna." msgid "Klipper" msgstr "Klipper" @@ -11780,34 +14258,34 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Drukarka do druku granulatem" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "Włącz tę opcję, jeśli Twoja drukarka używa granulatu zamiast filamentu" msgid "Support multi bed types" msgstr "Wspiera różne typy płyt roboczych" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "Włącz tę opcję, jeśli chcesz używać wielu rodzajów płyt roboczych" msgid "Label objects" msgstr "Etykietuj obiekty" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" "Włącz to, aby dodać komentarze do pliku G-Code, oznaczające ruchy druku, do " "jakiego obiektu należą. Jest to przydatne dla wtyczki Octoprint " -"CancelObject. Te ustawienia NIE są kompatybilne z konfiguracją Single " -"Extruder Multi Material i opcją Wipe into Object / Wipe into Infill." +"CancelObject. Te ustawienia NIE są kompatybilne z konfiguracją Pojedynczy " +"ekstruder Wielomateriałowy i opcją Wipe into Object / Wipe into Infill." msgid "Exclude objects" msgstr "Wyłącz obiekty" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "Włącz tę opcję, aby dodać polecenie EXCLUDE OBJECT do G-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Włącz tę opcję, aby dodać polecenie EXCLUDE OBJECT do G-code." msgid "Verbose G-code" msgstr "Rozszerzony G-code" @@ -11832,8 +14310,143 @@ msgstr "" "zaoszczędzić czas. Ściana będzie nadal drukowana z pierwotną wysokością " "warstwy." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Kombinacja wypełnienia - Maks. wysokość warstwy" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Maksymalna wysokość warstwy dla kombinacji łączenia rzadkiego wypełnienia.\n" +"\n" +"Ustaw ją na 0 lub 100%, aby użyć średnicy dyszy (dla maksymalnej redukcji " +"czasu druku) lub na wartość ~80%, aby zmaksymalizować wytrzymałość rzadkiego " +"wypełnienia.\n" +"\n" +"Liczba warstw, w których wypełnienie jest łączone, jest obliczana przez " +"podzielenie tej wartości przez wysokość warstwy i zaokrąglenie w dół do " +"najbliższej liczby całkowitej.\n" +"\n" +"Użyj wartości absolutnych w mm (np. 0,32 mm dla dyszy 0,4 mm) lub wartości " +"procentowych (np. 80%). Ta wartość nie może być większa niż średnica dyszy." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." -msgstr "Filament do druku wewnętrznego wypełnienia." +msgstr "" +"Ten filament będzie używany do druku rzadkiego wewnętrznego wypełnienia." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " @@ -11865,9 +14478,9 @@ msgstr "Nachodzenie pełnego wypełnienia na ściany" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "Górny obszar wypełnienia jest nieznacznie powiększony, aby zachodził na " "ścianę w celu lepszego połączenia i zminimalizowania pojawiania się otworów " @@ -11875,35 +14488,46 @@ msgstr "" "jest dobrym punktem wyjścia, minimalizującym pojawianie się otworów. Wartość " "procentowa odnosi się do szerokości linii wypełnienia" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Prędkość wewnętrznego wypełnienia" +msgid "Inherits profile" +msgstr "Dziedziczy profil" + +msgid "Name of parent profile." +msgstr "Nazwa nadrzędnego profilu" + msgid "Interface shells" msgstr "Powłoki łączące" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Wymuszaj generowanie warstw między sąsiadującymi materiałami/woluminami. " "Przydatne przy wydrukach z wieloma ekstruderami, materiałów o przejrzystej " "strukturze lub rozpuszczalnym materiale do drukowania podpór" msgid "Maximum width of a segmented region" -msgstr "Maksymalna szerokość segmentowanej strefy" +msgstr "Maksymalna szerokość segmentu" msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "" -"Maksymalna szerokość segmentowanej strefy. Wartość zero wyłącza tę funkcję." +msgstr "Maksymalna szerokość segmentu. Wartość zero wyłącza tę funkcję." msgid "Interlocking depth of a segmented region" msgstr "Głębokość zazębiania się podzielonego na segmenty obszaru" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Głębokość zazębiania się podzielonego na segmenty regionu. Wartość zero " -"wyłącza tę funkcję." +"Głębokość zazębiania się podzielonego na segmenty obszaru. Zostanie ona " +"zignorowana, jeśli „mmu_segmented_region_max_width” wynosi zero lub jeśli " +"„mmu_segmented_region_interlocking_depth” jest większa niż " +"„mmu_segmented_region_max_width”. Wartość zero wyłącza tę funkcję." msgid "Use beam interlocking" msgstr "Użyj struktury zazębiającej" @@ -11986,7 +14610,7 @@ msgstr "Wszystkie jednolite warstwy" msgid "Ironing Pattern" msgstr "Wzór prasowania" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "Wzór, który zostanie użyty podczas prasowania" msgid "Ironing flow" @@ -11994,7 +14618,7 @@ msgstr "Przepływ prasowania" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Ilość materiału do wytłoczenia podczas prasowania. Względem przepływu o " "normalnej wysokości warstwy. Zbyt wysoka wartość powoduje nadmierną " @@ -12003,36 +14627,49 @@ msgstr "" msgid "Ironing line spacing" msgstr "Odstęp między liniami" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Odstęp między liniami prasowania" +msgid "Ironing inset" +msgstr "Wstawka prasowania" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "Odległość od krawędzi. Wartość 0 ustawia ją na połowę średnicy dyszy." + msgid "Ironing speed" msgstr "Szybkość prasowania" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Prędkość drukowania linii dla prasowania" -msgid "Ironing angle" -msgstr "Kąt prasowania" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"Kąt, pod jakim wykonywane jest prasowanie. Liczba ujemna wyłącza tę funkcję " -"i używa domyślnej metody." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "Ten fragment G-code jest wstawiany przy każdej zmianie warstwy po " -"podniesieniu osi Z" +"podniesieniu osi Z." + +msgid "Clumping detection G-code" +msgstr "" msgid "Supports silent mode" msgstr "Obsługuje tryb cichy" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Czy drukarka obsługuje tryb cichy, w którym drukarka używa niższego " "przyspieszenia do druku" @@ -12045,26 +14682,26 @@ msgstr "Limity maszyny" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Jeśli ta opcja jest włączona, limity maszyny zostaną wysłane do pliku G-" "code.\n" "Ta opcja zostanie zignorowana, jeśli wybrany jest G-code Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Ten G-code zostanie użyty przy pauzie wydruku. Użytkownik może wstawić G-" -"code do przeglądarki gcode" +"code do przeglądarki G-code." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Ten G-code będzie użyty jako niestandardowy" msgid "Small area flow compensation (beta)" msgstr "Kompensacja przepływu małych obszarów (beta)" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" "Włącz kompensację przepływu dla małych obszarów wypełnienia\n" "\n" @@ -12078,13 +14715,9 @@ msgstr "Model Kompensacji Przepływu" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Model kompensacji przepływu, używany do dostosowywania przepływu dla małych " -"obszarów wypełnienia. Model jest wyrażony jako para wartości oddzielonych " -"przecinkiem dla długości wytłoczenia i czynników korekty przepływu, jeden " -"zestaw na linię, w następującym formacie: \"1.234,5.678\"" msgid "Maximum speed X" msgstr "Maksymalna prędkość X" @@ -12158,6 +14791,15 @@ msgstr "Maksymalny Jerk osi Z" msgid "Maximum jerk of the E axis" msgstr "Maksymalny Jerk osi E" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Minimalna prędkość ekstruzji" @@ -12183,29 +14825,44 @@ msgid "Maximum acceleration for retracting (M204 R)" msgstr "Maksymalne przyspieszenie cofania (M204 R)" msgid "Maximum acceleration for travel" -msgstr "Maksymalne przyspieszenie podczas ruchów jałowych" +msgstr "Maksymalne przyspieszenie podczas przemieszczania" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Maksymalne przyspieszenie podróży (M204 T), dotyczy tylko Marlin 2" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Max" + +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "Prędkość wentylatora chłodzenia części może być zwiększona, gdy jest " "włączona funkcja automatycznego chłodzenia. To jest maksymalne ograniczenie " "prędkości wentylatora chłodzenia części" -msgid "Max" -msgstr "Max" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Największa wysokość warstwy drukowalnej dla extrudera. Używane do " -"ograniczenia maksymalnej wysokości warstwy podczas włączonej adaptacyjnej " -"wysokości warstwy" msgid "Extrusion rate smoothing" msgstr "Wygładzanie przepływu ekstruzji" @@ -12216,23 +14873,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12243,7 +14900,7 @@ msgstr "" "prędkość/większa szerokość) do wytłaczania o niższym przepływie (mniejsza " "prędkość/mniejsza szerokość) i odwrotnie.\n" "\n" -"Określa maksymalną szybkość, o jaką natężenie przepływu wytłaczania w mm3/s " +"Określa maksymalną szybkość, o jaką natężenie przepływu wytłaczania w mm³/s " "może zmieniać się w czasie. Wyższe wartości oznaczają, że dozwolone są " "większe zmiany szybkości wytłaczania, co skutkuje szybszymi przejściami " "prędkości.\n" @@ -12255,45 +14912,58 @@ msgstr "" "potrzebna. Może ona jednak zapewnić pewne marginalne korzyści w niektórych " "przypadkach, gdy prędkości funkcji znacznie się różnią. Na przykład, gdy " "występują agresywne spowolnienia spowodowane nawisami. W takich przypadkach " -"zalecana jest wysoka wartość około 300-350 mm3/s2, ponieważ pozwala to na " +"zalecana jest wysoka wartość około 300-350 mm³/s², ponieważ pozwala to na " "wystarczające wygładzenie, aby wspomóc wzrost ciśnienia w celu uzyskania " "płynniejszego przejścia przepływu.\n" "\n" "W przypadku wolniejszych drukarek bez przyspieszenia ciśnienia wartość ta " -"powinna być znacznie niższa. Wartość 10-15 mm3/s2 jest dobrym punktem " -"wyjścia dla extruderów z napędem bezpośrednim i 5-10 mm3/s2 dla extruderów " +"powinna być znacznie niższa. Wartość 10-15 mm³/s² jest dobrym punktem " +"wyjścia dla extruderów z napędem bezpośrednim i 5-10 mm³/s² dla extruderów " "typu Bowden.\n" "\n" "Ta funkcja jest znana jako Pressure Equalizer w Prusa slicer.\n" "\n" "Uwaga: ten parametr wyłącza dopasowanie łuku (Arc Fitting)." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "Długość odcinka do wygładzenia" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Mniejsza wartość skutkuje płynniejszymi przejściami prędkości ekstruzji. " -"Jednakże prowadzi to do znacznie większego pliku gcode i większej liczby " -"instrukcji do przetworzenia przez drukarkę.\n" +"Mniejsza wartość zapewnia płynniejsze zmiany prędkości ekstruzji. Jednak " +"powoduje to znaczny wzrost rozmiaru pliku G-code oraz liczby instrukcji " +"przetwarzanych przez drukarkę.\n" "\n" -"Domyślna wartość 3 działa dobrze dla większości przypadków. Jeśli Twoja " -"drukarka się zacina, zwiększ tę wartość, aby zredukować liczbę dostosowań.\n" +"Domyślna wartość 3 sprawdza się w większości przypadków. Jeśli drukarka " +"drukuje z krótkimi zacięciami, zwiększ tę wartość, aby ograniczyć liczbę " +"zmian.\n" "\n" -"Dozwolone wartości: 1-5" +"Dozwolone wartości: 0.5–5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "Zastosuj tylko do elementów zewnętrznych" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Wygładzanie prędkości ekstruzji będzie stosowane tylko do zewnętrznych " +"perymetrów i nawisań.\n" +"Pomaga to zmniejszyć liczbę artefaktów spowodowanych nagłymi zmianami " +"prędkości na widocznych zewnętrznych obszarach, bez wpływu na prędkość " +"drukowania wewnętrznych elementów, które nie są widoczne dla użytkownika." + +msgid "Minimum speed for part cooling fan." msgstr "Minimalna prędkość wentylatora chłodzenia części" msgid "" @@ -12309,32 +14979,24 @@ msgstr "" "Proszę włączyć opcję auxiliary_fan w ustawieniach drukarki, aby skorzystać z " "tej funkcji. Polecenie G-code: M106 P2 S(0-255)" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Najniższa możliwa do wydrukowania wysokość warstwy dla extrudera. Stosowana " -"jako dolna granica dla adaptacyjnej wysokości warstw" msgid "Min print speed" msgstr "Minimalna prędkość druku" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"Minimalna prędkość druku, do której drukarka zwolni, aby zachować minimalny " -"czas warstwy powyżej, gdy włączona jest opcja zwalniania dla lepszego " -"schładzania warstwy." +"Minimalna prędkość drukowania, do której drukarka zwolni, aby zachować " +"minimalny czas warstwy określony powyżej, jeśli włączona jest opcja " +"spowalnianie druku dla lepszego chłodzenia warstw." -msgid "Nozzle diameter" -msgstr "Średnica dyszy" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Średnica dyszy" msgid "Configuration notes" @@ -12347,7 +15009,7 @@ msgstr "" "Tutaj możesz umieścić notatki, które zostaną dodane do nagłówka pliku G-code." msgid "Host Type" -msgstr "Typ hosta" +msgstr "Rodzaj serwera" msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " @@ -12359,7 +15021,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Objętość dyszy" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Objętość przestrzeni w dyszy między nożem a wylotem dyszy" msgid "Cooling tube position" @@ -12377,7 +15039,7 @@ msgstr "" "wewnątrz." msgid "High extruder current on filament swap" -msgstr "Wysoki prąd extrudera przy wymianie filamentu" +msgstr "Wyższy prąd extrudera przy zmianie filamentu" msgid "" "It may be beneficial to increase the extruder motor current during the " @@ -12404,7 +15066,7 @@ msgstr "Dodatkowa długość ładowania" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Gdy ta wartość wynosi zero, to długość ładowania filamentu z pozycji " @@ -12424,17 +15086,24 @@ msgstr "Zmniejszanie retrakcji wypełnienia" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Nie wykonuj retrakcji, gdy ruch odbywa się całkowicie w obszarze " "wypełnienia. Oznacza to, że wyciek nie będzie widoczny. Może to zmniejszyć " "liczbę retrakcji dla skomplikowanego modelu i zaoszczędzić czas druku, ale " "spowolnić krojenie i generowanie G-code" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Opcja ta obniży temperaturę nieaktywnych ekstruderów, aby zapobiec " +"wyciekaniu filamentu (Ooze)." + msgid "Filename format" msgstr "Format nazwy pliku" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" "Użytkownik może samodzielnie zdefiniować nazwę pliku projektu podczas " "eksportu" @@ -12448,7 +15117,7 @@ msgstr "" "podporowego." msgid "Make overhangs printable - Maximum angle" -msgstr "Drukuj nawisy bez podpór - Maksymalny kąt" +msgstr "Drukuj nawisy bez podpór - maksymalny kąt" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " @@ -12461,18 +15130,15 @@ msgstr "" "wystające materiałem stożkowym." msgid "Make overhangs printable - Hole area" -msgstr "Drukuj nawisy bez podpór - Obszar otworów" +msgstr "Drukuj nawisy bez podpór - obszar otworów" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Maksymalna powierzchnia otworu w podstawie modelu przed jego wypełnieniem " "materiałem stożkowym. Wartość 0 wypełni wszystkie otwory w podstawie modelu." -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Wykrywanie ścian nawisu" @@ -12484,6 +15150,9 @@ msgstr "" "Określ procentowy udział nawisów w stosunku do szerokości ekstruzji i użyj " "różnych prędkości do druku. Dla 100%% nawisów, zostanie użyta prędkość mostu." +msgid "Filament to print walls." +msgstr "Ten filament będzie używany do drukowania ścian" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." @@ -12491,10 +15160,10 @@ msgstr "" "Szerokość linii wewnętrznej ściany. Jeśli wyrażona w procentach, zostanie " "obliczona na podstawie średnicy dyszy." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Prędkość wewnętrznej ściany" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Ilość ścian każdej warstwy" msgid "Alternate extra wall" @@ -12502,10 +15171,10 @@ msgstr "Alternatywna dodatkowa ściana" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -12514,11 +15183,11 @@ msgstr "" "wypełnienie jest osadzone pionowo między ścianami, co prowadzi do uzyskania " "wydruków o większej wytrzymałości.\n" "\n" -"Kiedy ta opcja jest włączona, to opcja \"zapewnij stałą pionową grubość " -"powłoki\" musi być wyłączona.\n" +"Kiedy ta opcja jest włączona, to opcja „zapewnij stałą pionową grubość " +"powłoki” musi być wyłączona.\n" "\n" -"Nie jest zalecane korzystanie z wypełnienia typu \"lightning\" jednocześnie " -"z tą opcją, ponieważ wypełnienie to jest ograniczone i nie jest w stanie " +"Nie jest zalecane korzystanie z wypełnienia typu „lightning” jednocześnie z " +"tą opcją, ponieważ wypełnienie to jest ograniczone i nie jest w stanie " "dostarczyć wystarczającego wsparcia dla dodatkowych obwodów." msgid "" @@ -12534,16 +15203,25 @@ msgstr "" "code jako pierwszy argument, a także będą mogły uzyskać dostęp do ustawień " "konfiguracyjnych Snapmaker Orca, zytając zmienne środowiskowe." +msgid "Printer type" +msgstr "Typ drukarki" + +msgid "Type of the printer." +msgstr "Rodzaj drukarki" + msgid "Printer notes" msgstr "Notatki o drukarce" msgid "You can put your notes regarding the printer here." msgstr "Tutaj możesz umieścić notatki dotyczące drukarki." +msgid "Printer variant" +msgstr "Wariant drukarki" + msgid "Raft contact Z distance" msgstr "Odległość Z kontaktu z tratwą" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Dystans między modelem, a raftem, mierzony w poziomie. Ignorowany dla " "rozpuszczalnych warstw łączących" @@ -12551,87 +15229,85 @@ msgstr "" msgid "Raft expansion" msgstr "Rozszerzenie tratwy" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Rozszerzanie wszystkich warstw tratwy w płaszczyźnie XY" msgid "Initial layer density" msgstr "Gęstość pierwszej warstwy" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Gęstość pierwszej warstwy raftu lub podpór" msgid "Initial layer expansion" msgstr "Rozszerzenie pierwszej warstwy" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Rozszerz pierwszą warstwę tratwy lub podpory, aby poprawić przyczepność do " "płyty grzewczej" msgid "Raft layers" -msgstr "Ilość warstw tratwy" +msgstr "Liczba warstw tratwy" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"Model zostanie podniesiony o zadaną ilość warstw i umieszczony na podporach. " -"Użyj tej funkcji, aby uniknąć deformacji podczas drukowania ABS" +"Model zostanie podniesiony o zadaną liczbę warstw i umieszczony na " +"podporach. Użyj tej funkcji, aby uniknąć deformacji podczas drukowania ABS" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Ścieżka G-code jest generowana po uproszczeniu konturu modelu, aby uniknąć " "zbyt wielu punktów i linii w pliku G-code. Mniejsza wartość oznacza wyższą " -"rozdzielczość i więcej czasu na krojenie" +"rozdzielczość i więcej czasu na krojenie." msgid "Travel distance threshold" msgstr "Próg odległości podróży" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" -"Wywołaj retrakcję tylko wtedy, gdy dystans ruchu jałowego jest dłuższy niż " -"ta wartość" +"Wywołaj retrakcję tylko wtedy, gdy dystans przemieszania jest dłuższy niż ta " +"wartość" msgid "Retract amount before wipe" -msgstr "Długość retrakcji przed ruchem czyszczącym" +msgstr "Długość retrakcji przed wytarciem dyszy" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"Długość szybkiej retrakcji przed czyszczeniem, w stosunku do długości " +"Długość szybkiej retrakcji przed wytarciem dyszy, w stosunku do długości " "retrakcji." msgid "Retract when change layer" msgstr "Retrakcja przy zmianie warstwy" -msgid "Force a retraction when changes layer" -msgstr "Wymuś retrakcję przy zmianie warstwy" +msgid "Force a retraction when changes layer." +msgstr "Wymuś retrakcje przy zmianie warstwy" msgid "Retraction Length" msgstr "Długość retrakcji" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Pewna ilość materiału w ekstruderze jest cofana, aby zapobiec wyciekowi " -"filamentu podczas długiego ruchu. Ustaw zero, aby zablokować retrakcje" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "Długość retrakcji przed odcięciem filamentu (eksperymentalna)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Funkcja eksperymentalna. Wycofanie i odcięcie filamentu na większej " +"Funkcja eksperymentalna: Wycofanie i odcięcie filamentu na większej " "odległości podczas jego zmian w celu zminimalizowania objętości płukania. " "Chociaż znacząco zmniejszy to zużycie filamentu, może to również zwiększyć " "ryzyko zatkania dyszy lub innych problemów podczas drukowania." @@ -12640,50 +15316,59 @@ msgid "Retraction distance when cut" msgstr "Długość retrakcji podczas cięcia" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Funkcja eksperymentalna. Długość retrakcji przed odcięciem podczas zmiany " +"Funkcja eksperymentalna: Długość retrakcji przed odcięciem podczas zmiany " "filamentu" -msgid "Z hop when retract" -msgstr "Z-hop podczas retrakcji" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Wysokość Z-hop" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Zawsze gdy wykonana jest retrakcja, dysza jest nieco podnoszona, aby " "stworzyć odstęp między dyszą a wydrukiem. Zapobiega to uderzeniu dyszy w " -"wydruk podczas ruchu jałowego. Użycie linii spiralnej do podniesienia Z może " -"zapobiec powstawaniu strun" +"wydruk podczas przemieszczania. Użycie linii spiralnej do podniesienia Z " +"może zapobiec powstawaniu strun" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Dolna granica Z-hop" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Jeśli podana jest dodatnia wartość, oś Z będzie podnosić się tylko poniżej " "ustawionej tutaj granicy. W ten sposób możesz zablokować podnoszenie się osi " "Z powyżej ustawionej wysokości." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Górna granica Z-hop" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Jeśli podano wartość dodatnią, oś Z będzie podnosić się tylko powyżej " "określonej tutaj wysokości. Dzięki temu możesz wyłączyć podnoszenie osi Z " "podczas drukowania pierwszych warstw (na początku drukowania)." -msgid "Z hop type" +msgid "Z-hop type" msgstr "Typ Z-hop" +msgid "Type of Z-hop." +msgstr "" + msgid "Slope" msgstr "Ukośny" @@ -12694,10 +15379,10 @@ msgid "Traveling angle" msgstr "Kąt ruchu" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" -"Kąt ruchu dla typu Z-hop: \"Ukośny\" i \"Spiralny\". Ustawienie go na 90° " +"Kąt ruchu dla typu Z-hop: „Ukośny” i „Spiralny”. Ustawienie go na 90° " "skutkuje standardowym uniesieniem." msgid "Only lift Z above" @@ -12724,7 +15409,7 @@ msgid "On surfaces" msgstr "Na powierzchniach" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Wymuszaj zachowanie Z-hop. To ustawienie jest zależne od ustawień powyżej (Z-" @@ -12742,14 +15427,26 @@ msgstr "Tylko na dolnych" msgid "Top and Bottom" msgstr "Na górnych i dolnych" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" -msgstr "Dodatkowa długość przed wznowieniem" +msgstr "Dodatkowa ilość dla powrotu" msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Gdy retrakcja jest kompensowana po ruchu jałowym, ekstruder przepycha tę " +"Gdy retrakcja jest kompensowana po przemieszczeniu, ekstruder przepycha tę " "dodatkową ilość filamentu. To opcja jest rzadko potrzebna." msgid "" @@ -12762,29 +15459,27 @@ msgstr "" msgid "Retraction Speed" msgstr "Prędkość retrakcji" -msgid "Speed of retractions" -msgstr "Prędkość retrakcji" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Prędkość deretrakcji" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Prędkość ponownego załadowania filamentu do extrudera. Zero oznacza tę samą " -"prędkość co retrakcja" msgid "Use firmware retraction" -msgstr "Użyj retrakcji z firmware" +msgstr "Użyj retrakcji sterowanej przez firmware." msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" "To eksperymentalne ustawienie używa komend G10 i G11, aby oprogramowanie " -"obsługiwało retrakcję. Jest to obsługiwane tylko w najnowszych wersjach " -"Marlin." +"obsługiwało cofnięcie filamentu. Jest to obsługiwane tylko w najnowszych " +"wersjach Marlin." msgid "Show auto-calibration marks" msgstr "Pokaż znaczniki autokalibracji" @@ -12793,15 +15488,15 @@ msgid "Disable set remaining print time" msgstr "Wyłącz ustawianie pozostałego czasu druku" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Zablokuj generowanie polecenia M73: Ustaw pozostały czas druku w końcowym G-" -"code" +"code." msgid "Seam position" msgstr "Pozycja szwu" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Początkowa pozycja do drukowania każdej części zewnętrznej ściany" msgid "Nearest" @@ -12810,6 +15505,9 @@ msgstr "Najbliższy" msgid "Aligned" msgstr "Wyrównany" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Tył" @@ -12895,17 +15593,17 @@ msgstr "Prędkość szwu ukośnego" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Ta opcja ustawia prędkość druku dla szwów ukośnych. Zaleca się drukowanie " "szwów ukośnych z niższą prędkością (poniżej 100 mm/s). Zaleca się również " -"włączenie 'Wygładzania współczynnika ekstruzji', jeśli ustawiona prędkość " +"włączenie „Wygładzania współczynnika ekstruzji”, jeśli ustawiona prędkość " "znacząco różni się od prędkości zewnętrznych lub wewnętrznych obwodów. " "Jeżeli prędkość określona tutaj jest wyższa niż prędkość zewnętrznych lub " "wewnętrznych obwodów, drukarka domyślnie użyje wolniejszej z dwóch " @@ -12960,18 +15658,19 @@ msgid "Use scarf joint for inner walls as well." msgstr "Zastosuj szwy ukośne również do wewnętrznych obrysów." msgid "Role base wipe speed" -msgstr "Prędkość czyszczenia w oparciu o rolę ekstruzji" +msgstr "Prędkość wycierania dyszy w oparciu o rolę ekstruzji" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"Szybkość czyszczenia głowicy drukującej jest ustalana na podstawie prędkości " -"aktualnie używanej w procesie ekstruzji. Na przykład, jeżeli czyszczenie " -"jest przeprowadzane zaraz po wydrukowaniu zewnętrznej ścianki modelu, to dla " -"czyszczenia wykorzystywana jest prędkość, która została zastosowana przy " -"drukowaniu tej ścianki." +"Szybkość wycierania dyszy drukującej jest ustalana na podstawie prędkości " +"aktualnie używanej w procesie ekstruzji. Na przykład, jeżeli wycieranie jest " +"przeprowadzane zaraz po wydrukowaniu zewnętrznej ścianki modelu, to dla " +"wycierania dyszy wykorzystywana jest prędkość, która została zastosowana " +"przy drukowaniu tej ścianki." msgid "Wipe on loops" msgstr "Czyszczenie na pętlach" @@ -12984,25 +15683,25 @@ msgstr "" "opuszczeniem pętli przez extruder wykonuje się mały ruch do wewnątrz." msgid "Wipe before external loop" -msgstr "Czyszczenie przed zewnętrzną pętlą" +msgstr "Wycieranie przed zewnętrzną pętlą" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Aby zminimalizować widoczność potencjalnego nadmiernego wytłaczania na " "początku zewnętrznego obwodu podczas drukowania z kolejnością drukowania " "Ściana Zewnętrzna/Wewnętrzna lub Wewnętrzna/Zewnętrzna/Wewnętrzna, " "deretrakcja jest wykonana nieco od wewnątrz od początku zewnętrznego obwodu. " "W ten sposób wszelkie potencjalne nadmierne wytłaczanie jest ukryte przed " -"zewnętrzną powierzchnią. \n" +"zewnętrzną powierzchnią.\n" "\n" "Jest to przydatne podczas drukowania z kolejnością drukowania Ściana " "zewnętrzna/Wewnętrzna lub Wewnętrzna/Zewnętrzna/Wewnętrzna, ponieważ w tych " @@ -13010,30 +15709,50 @@ msgstr "" "wydrukowany bezpośrednio po ruchu deretrakcji." msgid "Wipe speed" -msgstr "Prędkość czyszczenia" +msgstr "Prędkość wycierania" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"Prędkość czyszczenia jest ustalona przez ustawienie prędkości określone w " -"tej konfiguracji. Jeśli wartość jest wyrażona w procentach (np. 80%), będzie " -"obliczana na podstawie wcześniej ustawionej prędkości. Domyślna wartość dla " -"tego parametru to 80%" +"Prędkość wycierania dyszy jest ustalona przez ustawienie prędkości określone " +"w tej konfiguracji. Jeśli wartość jest wyrażona w procentach (np. 80%), " +"będzie obliczana na podstawie wcześniej ustawionej prędkości. Domyślna " +"wartość dla tego parametru to 80%" msgid "Skirt distance" -msgstr "Odstęp Skirtu od obiektu" +msgstr "Odstęp skirtu od obiektu" -msgid "Distance from skirt to brim or object" -msgstr "Odległość Skirtu do Brimu albo od obiektu" +msgid "The distance from the skirt to the brim or the object." +msgstr "Odległość skirtu do brumu albo do obiektu" + +msgid "Skirt start point" +msgstr "Punkt początkowy skirtu" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Kąt między środkiem obiektu a punktem początkowym skirtu. Zero to pozycja " +"najbardziej po prawej stronie, a w kierunku przeciwnym do ruchu wskazówek " +"zegara to kąt dodatni." msgid "Skirt height" -msgstr "Wysokość Skirtu" +msgstr "Wysokość skirt" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Ile warstw Skirtu. Zwykle tylko jedna warstwa" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Ile warstw skirtu. Zwykle tylko jedna warstwa" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "Draft shield" @@ -13041,86 +15760,101 @@ msgstr "Draft shield" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"Draft Shield (\"ochrona przed przeciągiem\")jest przydatna do ochrony " -"wydruku z ABS lub ASA przed wypaczaniem i oderwaniem się od stołu drukarki z " -"powodu podmuchów powietrza. Zazwyczaj jest to potrzebne tylko w przypadku " -"drukarek otwartych, czyli bez obudowy.\n" -"\n" -"Opcje:\n" -"Włączony = Skirt jest takiej samej wysokości, jak najwyższy wydrukowany " -"obiekt.\n" -"Ograniczony =Skirt jest takiej samej wysoki, jak został określony w wysokość " -"Skirtu.\n" +"Draft Shield („ochrona przed przeciągiem”)jest przydatna do ochrony wydruku " +"z ABS lub ASA przed wypaczaniem i oderwaniem się od stołu drukarki z powodu " +"podmuchów powietrza. Zazwyczaj jest to potrzebne tylko w przypadku drukarek " +"otwartych, czyli bez obudowy.\n" "\n" +"Włączony = skirt ma wysokość równą najwyższemu wydrukowanemu obiektowi. W " +"przeciwnym razie stosuje się „wysokość obramowania”.\n" "Uwaga: Aktywując funkcję Draft Shield, Skirt zostanie wydrukowany w takiej " "odległości od obiektu jak określono w odstęp Skirtu od obiektu. Jeśli w tym " "samym czasie Brim jest też aktywny, może dojść do jego przecięcia się ze " -"Skirt-em. Aby temu zapobiec, zwiększ wartość odległości Skirt - Obiekt\n" - -msgid "Limited" -msgstr "Ograniczony" +"Skirt-em. Aby temu zapobiec, zwiększ wartość odległości od Skirtu\n" msgid "Enabled" msgstr "Włączony" -msgid "Skirt loops" -msgstr "Ilość pętli Skirtu" +msgid "Skirt type" +msgstr "Rodzaj skirtu" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "To jest liczba pętli Skirtu. Zero oznacza, wyłączone tej funkcji" +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Połączony - pojedynczy skirt dla wszystkich obiektów.\n" +"Dla obiektu - indywidualny skirt dla każdego obiektu." + +msgid "Per object" +msgstr "Dla obiektu" + +msgid "Skirt loops" +msgstr "Liczba pętli skirt" + +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "To jest liczba pętli skirt. Zero oznacza, wyłączone tej funkcji" msgid "Skirt speed" -msgstr "Prędkość Skirtu" +msgstr "Prędkość skirtu" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "" -"Prędkość Skirtu, w mm/s. Zero oznacza użycie domyślnej prędkości ekstruzji " -"warstwy." +"Prędkość dla skirtu, w mm/s. Zero oznacza użycie domyślnej prędkości " +"ekstruzji warstwy." msgid "Skirt minimum extrusion length" -msgstr "Minimalna długość ekstruzji Skirtu" +msgstr "Minimalna długość ekstruzji skirtu" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"Minimalna długość ekstruzji filamentu podczas drukowania Skirtu, wyrażona w " -"milimetrach. Wartość zero oznacza, że ta funkcja jest wyłączona. \n" +"Minimalna długość ekstruzji filamentu w mm podczas drukowania skirtu. Zero " +"oznacza, że ta funkcja jest wyłączona.\n" "\n" -"Użycie wartości innej niż 0 jest przydatne, kiedy drukarka jest ustawiona " -"tak aby nie drukowała początkowej linii czyszczącej." +"Użycie wartości większej od zera jest przydatne, jeśli drukarka jest " +"skonfigurowana do drukowania bez linii wstępnej. Ostateczna liczba pętli nie " +"uwzględnia odległości między obiektami podczas ich układania lub " +"weryfikacji. W takim przypadku zwiększ liczbę pętli." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Prędkość drukowania w wyeksportowanym gcode zostanie zwolniona, gdy " "szacowany czas warstwy jest krótszy niż ta wartość, aby uzyskać lepsze " -"chłodzenie tych warstw" +"chłodzenie tych warstw." msgid "Minimum sparse infill threshold" msgstr "Minimalny próg wypełnienia" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Obszar wypełnienia, który jest mniejszy od wartości progowej zostaje " "zastąpiony wewnętrznym, pełnym wypełnieniem" +msgid "Solid infill" +msgstr "Pełne wypełnienie" + +msgid "Filament to print solid infill." +msgstr "Ten filament będzie używany do drukowania pełnego wypełnienia" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." @@ -13128,42 +15862,70 @@ msgstr "" "Szerokość linii wewnętrznego pełnego wypełnienia. Jeśli wyrażona w " "procentach, będzie obliczana na podstawie średnicy dyszy." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Prędkość wewnętrznego pełnego wypełnienia, nie dotyczy górnej i dolnej " "powierzchni" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Tryb Wazy wygładza ruchy osi z zewnętrznego konturu. Zamienia cały model w " "wydruk jednościenny z pełnymi dolnymi warstwami. Końcowy wygenerowany model " "nie ma szwu" msgid "Smooth Spiral" -msgstr "Wygładzona Spirala" +msgstr "Wygładzona spirala" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Wygładzona Spirala wygładza również ruchy w osiach X i Y, dzięki czemu nie " +"Wygładzona spirala wygładza również ruchy w osiach X i Y, dzięki czemu nie " "jest widoczny żaden szew, nawet w kierunkach XY na ścianach, które nie są " "pionowe" msgid "Max XY Smoothing" -msgstr "Maksymalne Wygładzanie XY" +msgstr "Maksymalne wygładzanie XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Maksymalna odległość, o którą można przesunąć punkty w płaszczyźnie XY, aby " "spróbować uzyskać gładką spiralę. Jeśli wyrażone jako %, będzie obliczane " "względem średnicy dyszy." +msgid "Spiral starting flow ratio" +msgstr "Współczynnik początkowego przepływu spirali" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Ustala początkowy współczynnik przepływu na początku spirali wazy. Zwykle " +"przepływ jest skalowany od 0% do 100% w pierwszym zwoju spirali, co może w " +"niektórych przypadkach powodować niedoekstrudowanie na początku spirali." + +msgid "Spiral finishing flow ratio" +msgstr "Współczynnik przepływu wykończenia spiralnego" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Ustala końcowy współczynnik przepływu podczas zakończenia spirali wazy. " +"Zwykle przepływ jest skalowany od 100% do 0% w ostatnim zwoju spirali, co " +"może w niektórych przypadkach powodować niedoekstrudowanie na końcu spirali." + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " @@ -13174,34 +15936,70 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"Jeśli wybrany jest tryb \"Tradycyjny\", dla każdego wydruku będzie tworzony " +"Jeśli wybrany jest tryb „Tradycyjny”, dla każdego wydruku będzie tworzony " "film poklatkowy (timelapse). Po wydrukowaniu każdej warstwy robione jest " "zdjęcie kamerą w komorze. Wszystkie te zdjęcia są komponowane w film " -"poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb \"Wygładź\", " +"poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb „Wygładź”, " "głowica drukująca przesunie się w pobliże otworu wyrzutowego przy każdej " "zmianie warstwy, a następnie zrobi zdjęcie. Ponieważ stopiony filament może " "wyciekać z dyszy podczas robienia zdjęcia, wieża czyszcząca jest wymagana w " -"trybie \"Wygładź\" do czyszczenia dyszy." +"trybie „Wygładź” do czyszczenia dyszy." msgid "Traditional" msgstr "Tradycyjny" msgid "Temperature variation" -msgstr "Wariacje temperatury" +msgstr "Zmiana temperatury" + +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Różnica temperatur, która ma być zastosowana, gdy ekstruder nie jest " +"aktywny. Wartość nie będzie użyta, gdy „temperatura w bezczynności” w " +"ustawieniach filamentu jest wartość inną niż zero." + +msgid "Preheat time" +msgstr "Czas wstępnego podgrzewania" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Aby skrócić czas oczekiwania po zmianie narzędzia, Orca może wstępnie " +"podgrzać następne narzędzie, gdy bieżące narzędzie jest nadal używane. To " +"ustawienie określa czas w sekundach do wstępnego podgrzania następnego " +"narzędzia. Orca wstawi polecenie M104, aby podgrzać narzędzie z " +"wyprzedzeniem." + +msgid "Preheat steps" +msgstr "Kroki wstępnego podgrzewania" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Wprowadź wiele poleceń dotyczących podgrzewania (np. M104.1). Funkcja ta " +"działa tylko w drukarce Prusa XL. Dla pozostałych drukarek ustaw wartość na " +"1." msgid "Start G-code" msgstr "Początkowy G-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Początkowy G-code przy rozpoczynaniu całego drukowania" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Początkowy G-code przy rozpoczynaniu drukowania tym filamentem" msgid "Single Extruder Multi Material" msgstr "Pojedynczy extruder wielomateriałowy" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "Użyj pojedynczej dyszy do drukowania wieloma filamentami" msgid "Manual Filament Change" @@ -13223,18 +16021,18 @@ msgstr "" msgid "Purge in prime tower" msgstr "Oczyszczanie na wieży czyszczącej" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "Oczyszczanie pozostałego filamentu do wieży czyszczącej" msgid "Enable filament ramming" -msgstr "Włącz szybką ekstruzję filamentu" +msgstr "" msgid "No sparse layers (beta)" -msgstr "Brak warstw bez czyszczenia (beta)" +msgstr "Warstwy bez czyszczenia (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -13245,7 +16043,7 @@ msgstr "" "wydrukiem." msgid "Prime all printing extruders" -msgstr "Przygotuj wszystkie extrudery do drukowania" +msgstr "Wyczyść wszystkie używane ekstrudery" msgid "" "If enabled, all printing extruders will be primed at the front edge of the " @@ -13262,8 +16060,8 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" -"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " +"Szpary mniejsze niż dwukrotność wartości parametru „promień zamykania szpar” " +"zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " "finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " "rozsądnie niskim poziomie." @@ -13274,8 +16072,8 @@ msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" -"Użyj \"Parzysto-nieparzysty\" dla modeli samolotów 3DLabPrint. Użyj " -"\"Zamknij otwory\" do zamknięcia wszystkich otworów w modelu." +"Użyj „Parzysto-nieparzysty” dla modeli samolotów 3DLabPrint. Użyj „Zamknij " +"otwory” do zamknięcia wszystkich otworów w modelu." msgid "Regular" msgstr "Regularny" @@ -13284,7 +16082,7 @@ msgid "Even-odd" msgstr "Parzysto-nieparzysty" msgid "Close holes" -msgstr "Zamknij otwory" +msgstr "Zamknięcie otworów" msgid "Z offset" msgstr "Przesunięcie w osi Z" @@ -13298,7 +16096,7 @@ msgstr "" "Wartość tego ustawienia zostanie dodana (lub odjęta) od wszystkich koordynat " "w osi Z w pliku wyjściowym G-code. Jest używana dla korekcji złego położenia " "wyłącznika krańcowego osi Z. Np. jeśli końcówka dyszy znajduje się 0.3 mm " -"ponad położeniem zerowym, ustaw tutaj -0.3 (lub napraw krańcówkę).\"" +"ponad położeniem zerowym, ustaw tutaj -0.3 (lub napraw krańcówkę)." msgid "Enable support" msgstr "Włącz" @@ -13307,32 +16105,38 @@ msgid "Enable support generation." msgstr "Włącz generowanie podpór." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"tryb 'normalny(auto)' oraz 'drzewo(auto)' służą do automatycznego " -"generowania podpór. Jeśli wybierzesz 'normalny(manual)' lub " -"'drzewo(manual)', zostaną wygenerowane jedynie podpory wymuszone" +"Opcje Normal (auto) i Drzewo (auto) służą do automatycznego generowania " +"podpór. Jeśli wybrane zostaną Normal (manual) lub Drzewo (manual), " +"generowane są tylko wymuszone podpry." -msgid "normal(auto)" -msgstr "normalny (auto)" +msgid "Normal (auto)" +msgstr "Normal (auto)" -msgid "tree(auto)" -msgstr "drzewo (auto)" +msgid "Tree (auto)" +msgstr "Drzewo (auto)" -msgid "normal(manual)" -msgstr "normalny (manual)" +msgid "Normal (manual)" +msgstr "Normal (manual)" -msgid "tree(manual)" -msgstr "drzewo (manual)" +msgid "Tree (manual)" +msgstr "Drzewo (manual)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Odległość XY miedzy podporą a obiektem" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Odstęp materiału podporowego od modelu w osiach XY" +msgid "Support/object first layer gap" +msgstr "Odstęp między podporą a pierwszą warstwą obiektu" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Odstęp XY między obiektem a jego podporą na pierwszej warstwie." + msgid "Pattern angle" msgstr "Kąt wzoru" @@ -13344,7 +16148,7 @@ msgstr "" msgid "On build plate only" msgstr "Tylko na stole" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Nie twórz podpór na powierzchni modelu, tylko na stole" msgid "Support critical regions only" @@ -13357,22 +16161,22 @@ msgstr "" "Twórz podpory tylko dla krytycznych obszarów, takich jak ostra krawędź, " "wspornik, itp." -msgid "Remove small overhangs" -msgstr "Usuń małe nawisy" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Usuń małe nawisy, które prawdopodobnie nie wymagają podpór." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Odstęp góry w osi Z" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "Odstęp osi Z między górną warstwą łączącą podporę z obiektem" msgid "Bottom Z distance" msgstr "Odstęp spodu w osi Z" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "Odległość w osi Z między dolną warstwą łączącyą a obiektem" msgid "Support/raft base" @@ -13380,9 +16184,9 @@ msgstr "Podstawa podpory/tratwy" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Filament do drukowania podstawy podpory i raftu. \"Domyślnie\" oznacza brak " +"Filament do drukowania podstawy podpory i raftu. „Domyślnie” oznacza brak " "wyboru konkretnego filamentu dla ich podstawy. Zostanie użyty obecny filament" msgid "Avoid interface filament for base" @@ -13413,21 +16217,21 @@ msgstr "Warstwy łączące podpory/tratwy" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"Filament do drukowania warstw łączących podpory z modelem. \"Domyślnie\" " +"Filament do drukowania warstw łączących podpory z modelem. „Domyślnie” " "oznacza brak konkretnego filamentu dla podpory i używanie obecnego filamentu" msgid "Top interface layers" msgstr "Górne warstwy łączące" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Liczba górnych warstw łączących" msgid "Bottom interface layers" msgstr "Dolne warstwy łączące" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Liczba dolnych warstw łączących" msgid "Same as top" @@ -13436,26 +16240,26 @@ msgstr "Takie samo jak u góry" msgid "Top interface spacing" msgstr "Rozstaw górnych warstw łączących" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Odstęp między liniami powierzchni warstwy łączącej. Wartość zero oznacza, że " -"warstwa łącząca jest jednolita i bez przerw" msgid "Bottom interface spacing" msgstr "Rozstaw dolnych warstw łączących" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Odstęp między liniami dolnej powierzchni warstwy łączącej. Wartość zero " "oznacza, że warstwa łącząca jest jednolita i bez przerw" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Prędkość dla warstw łączących" msgid "Base pattern" msgstr "Wzór podstawowy" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Liniowy wzór podpór" msgid "Rectilinear grid" @@ -13470,7 +16274,7 @@ msgstr "Wzór warstwy łączącej" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Wzór linii dla warstw łączących podpory. Standardowy wzór dla warstwy " "łączącej podpory nierozpuszczalnej jest Prostoliniowy, natomiast dla warstwy " @@ -13482,16 +16286,16 @@ msgstr "Prostoliniowe przeplatane" msgid "Base pattern spacing" msgstr "Rozstaw wzoru podstawowego" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Odstępy między liniami podpory" msgid "Normal Support expansion" msgstr "Rozszerzenie normalnej podpory" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Rozszerz (+) lub skurcz (-) poziomy zasięg normalnego wsparcia" -msgid "Speed of support" +msgid "Speed of support." msgstr "Prędkość podpory" msgid "" @@ -13512,9 +16316,15 @@ msgstr "" "styl hybrydowy stworzy podobną strukturę do normalnego wsparcia pod dużymi " "płaskimi nawisami." +msgid "Default (Grid/Organic)" +msgstr "Domyślne (Kratka/Organiczne)" + msgid "Snug" msgstr "Przylegający" +msgid "Organic" +msgstr "Organiczne" + msgid "Tree Slim" msgstr "Cienkie" @@ -13524,15 +16334,12 @@ msgstr "Grube" msgid "Tree Hybrid" msgstr "Hybrydowe" -msgid "Organic" -msgstr "Organiczne" - msgid "Independent support layer height" msgstr "Niezależna wysokość warstwy podpory" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Warstwa podpory używa niezależnej wysokości warstwy od warstwy obiektu. " @@ -13549,12 +16356,26 @@ msgstr "" "Podpora zostanie wygenerowana dla nawisów, których kąt nachylenia jest " "poniżej tego progu." +msgid "Threshold overlap" +msgstr "Próg nakładania" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Ustala próg nakładania się obwodów dla generowania podpór. Jeśli „Kąt " +"progowy podpory” wynosi zero, podpory będą tworzone dla wiszących obszarów, " +"gdzie górny obwód opiera się na dolnym w mniej niż zadanym procencie " +"szerokości. Im mniejsza wartość tego parametru, tym ostrzejsze nawisy można " +"wydrukować bez podpór." + msgid "Tree support branch angle" msgstr "Kąt nachylenia gałęzi" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "To ustawienie określa maksymalny kąt nawisu, jaki mogą tworzyć gałęzie " @@ -13598,31 +16419,21 @@ msgstr "" "trudniejsze do usunięcia, dlatego zaleca się włączenie górnych łączników " "podpór zamiast wysokiej gęstości gałęzi, jeśli potrzebne są gęste podpory." -msgid "Adaptive layer height" -msgstr "Adaptacyjna wysokość warstwy" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Włączenie tej opcji oznacza, że wysokość warstwy podpory drzewo, z wyjątkiem " -"pierwszej, zostanie automatycznie obliczona " - msgid "Auto brim width" -msgstr "Automatyczna szerokość Brimu" +msgstr "Automatyczna szerokość brimu" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" -"Włączenie tej opcji oznacza, że szerokość Brimu dla podpory drzewo będzie " +"Włączenie tej opcji oznacza, że szerokość brimu dla podpory drzewo będzie " "automatycznie obliczana" msgid "Tree support brim width" -msgstr "Szerokość Brimu dla podpory drzewa" +msgstr "Szerokość brimu dla podpory drzewa" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Odległość od gałęzi drzewa do najbardziej zewnętrznej linii Brimu" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Odległość od gałęzi drzewa do najbardziej zewnętrznej linii brimu" msgid "Tip Diameter" msgstr "Średnica końcówki" @@ -13652,67 +16463,117 @@ msgstr "" "0 spowoduje, że gałęzie będą miały jednakową grubość na całej długości. " "Niewielki kąt może zwiększyć stabilność podpór organicznych." -msgid "Branch Diameter with double walls" -msgstr "Średnica gałęzi z podwójnymi ścianami" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Gałęzie o powierzchni większej niż powierzchnia koła o tej średnicy będą " -"drukowane z podwójnymi ścianami dla stabilności. Ustaw tę wartość na zero, " -"aby nie było podwójnych ścian." - msgid "Support wall loops" msgstr "Pętle ścian podpory" -msgid "This setting specify the count of walls around support" -msgstr "To ustawienie określa liczbę ścian wokół podpory" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Ta opcja określa liczbę ścian podpory w przedziale [0, 2]. 0 oznacza wybór " +"automatyczny." msgid "Tree support with infill" msgstr "Podpora w formie drzewa z wypełnieniem" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "To ustawienie określa, czy dodać wypełnienie wewnątrz dużych pustych " "przestrzeni podpor (drzewa)" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "Aktywuj kontrolę temperatury" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Włącz tę opcję dla kontroli temperatury komory. Komenda M191 zostanie dodana " -"przed \"początkowy G-code drukarki\"\n" -"Komendy G-code: M141/M191 S(0-255)" +"Włącz tę opcję, aby automatycznie kontrolować temperaturę komory. Ta opcja " +"aktywuje wysyłanie polecenia M191 przed „machine_start_gcode”, które ustawia " +"temperaturę komory i czeka, aż zostanie osiągnięta. Dodatkowo na końcu druku " +"wysyła polecenie M141, aby wyłączyć podgrzewacz komory, jeśli jest obecny.\n" +"\n" +"Ta opcja opiera się na poleceniach M191 i M141 wspieranych przez " +"oprogramowanie układowe, czy to za pomocą makr, czy natywnie i jest używana, " +"gdy zainstalowany jest aktywna podgrzewacz." msgid "Chamber temperature" msgstr "Temperatura komory" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Wyższa temperatura komory może pomóc w redukcji wypaczania i potencjalnie " -"prowadzić do większej siły wiązania międzywarstwowego w przypadku materiałów " -"wysokotemperaturowych, takich jak ABS, ASA, PC, PA itp. Dla filametów PLA, " -"PETG, TPU, PVA i innych materiałów niskotemperaturowych temperatura komory " -"nie powinna być wysoka. Aby uniknąć zatykania sie dyszy zaleca się " -"ustawienia na wartość 0 (wyłączone)." +"Dla materiałów wysokotemperaturowych, takich jak ABS, ASA, PC i PA, wyższa " +"temperatura komory może pomóc w tłumieniu lub redukcji odkształceń i " +"potencjalnie prowadzić do wyższej siły połączeń międzywarstwowych. Jednak " +"jednocześnie wyższa temperatura komory obniża efektywność filtracji " +"powietrza dla ABS i ASA.\n" +"\n" +"Dla PLA, PETG, TPU, PVA i innych materiałów niskotemperaturowych ta opcja " +"powinna być wyłączona (ustawiona na 0), ponieważ temperatura komory powinna " +"być niska, aby uniknąć zatykania ekstrudera spowodowanego zmiękczeniem " +"materiału w miejscu przejścia ciepła.\n" +"\n" +"Jeśli włączona, ten parametr ustawia także zmienną gcode o nazwie " +"chamber_temperature, która może być użyta do przekazania żądanej temperatury " +"komory do makra rozpoczynającego drukowanie, lub makra utrzymywania ciepła, " +"na przykład: PRINT_START (inne zmienne) CHAMBER_TEMP=[chamber_temperature]. " +"Może to być przydatne, jeśli twoja drukarka nie obsługuje poleceń M141/M191 " +"lub jeśli chcesz zarządzać utrzymywaniem ciepła w makrze rozpoczynającym " +"drukowanie, jeśli nie jest zainstalowany aktywna podgrzewacz komory." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Temperatura dyszy dla warstw po początkowej" msgid "Detect thin wall" @@ -13720,20 +16581,20 @@ msgstr "Wykrywanie cienkich ścian" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Wykrywaj ściany o grubości jednego obrysu. Są to obszary, gdzie 2 obrysy nie " "zmieszczą się i trzeba będzie połączyć je w jedną linię" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Ten gcode jest wstawiany podczas zmiany filamentu, w tym komendy T do " -"wywołania zmiany narzędzia" +"wywołania zmiany narzędzia." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Ten G-code jest dodawany przy zmianie funkcji ekstruzji" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Ten G-code jest dodawany przy zmianie funkcji ekstruzji." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " @@ -13742,7 +16603,7 @@ msgstr "" "Szerokość linii dla górnych powierzchni. Jeśli wyrażona w procentach, będzie " "obliczona na podstawie średnicy dyszy." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Prędkość wypełnienia górnej powierzchni, która jest zwarta" msgid "Top shell layers" @@ -13751,7 +16612,7 @@ msgstr "Górne warstwy powłoki" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "To jest liczba pełnych warstw górnej powłoki, włączając w to górną " "powierzchnie. Jeżeli grubość obliczona na podstawie tej wartości jest " @@ -13768,8 +16629,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Liczba górnych zwartych warstw jest zwiększana podczas cięcia, jeśli grubość " "obliczona przez górną warstwe powłoki jest cieńsza niż ta wartość. Można w " @@ -13777,17 +16638,38 @@ msgstr "" "oznacza, że to ustawienie jest wyłączone, a grubość górnej powłoki jest " "absolutnie określona przez górne warstwy powłoki" -msgid "Speed of travel which is faster and without extrusion" -msgstr "Prędkość jałowa, która jest szybsza i bez ekstruzji" - -msgid "Wipe while retracting" -msgstr "Czyszczenie przy retrakcji" +msgid "Top surface density" +msgstr "" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." msgstr "" -"Przesuń dyszę wzdłuż ostatniej ścieżki ekstruzji podczas cofania, aby " + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Prędkość przemieszczania, która jest szybsza i bez ekstruzji" + +msgid "Wipe while retracting" +msgstr "Wycieranie przy retrakcji" + +msgid "" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." +msgstr "" +"Przesuń dyszę wzdłuż ostatniej ścieżki ekstruzji podczas retrakcji, aby " "oczyścić wyciekły filament na dyszy. Może to zminimalizować wystąpienie " "grudek podczas drukowania nowej części po przejeździe" @@ -13795,22 +16677,21 @@ msgid "Wipe Distance" msgstr "Odległość czyszczenia" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" "Opisz, jak długo dysza będzie się przesuwać wzdłuż ostatniej ścieżki podczas " -"cofania. \n" +"retrakcji.\n" "\n" "W zależności od tego, jak długo trwa operacja czyszczenia oraz jak szybkie i " "długie są ustawienia cofania extrudera/filamentu, może być potrzebny ruch " -"cofania, aby cofnąć pozostały filament. \n" +"cofania, aby cofnąć pozostały filament.\n" "\n" "Ustawienie wartości w ilości cofania przed ustawieniem czyszczenia poniżej " "spowoduje wykonanie nadmiernego cofania przed czyszczeniem, w przeciwnym " @@ -13825,6 +16706,12 @@ msgstr "" "stabilizacji ciśnienia w komorze wewnątrz dyszy, aby uniknąć defektów " "wyglądu podczas drukowania obiektów." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Objętości czyszczenia" @@ -13845,15 +16732,20 @@ msgid "The volume of material to prime extruder on tower." msgstr "" "Objętość materiału, który ekstruder powinien upuścić na wieży czyszczącej." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Szerokość wieży czyszczącej" msgid "Wipe tower rotation angle" msgstr "Kąt obrotu wieży czyszczącej" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Kąt obrotu wieży czyszczącej względem osi x." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Kąt wierzchołka stożka stabilizacji" @@ -13864,12 +16756,6 @@ msgstr "" "Kąt w wierzchołku stożka, który jest używany do stabilizacji wieży " "czyszczącej. Większy kąt oznacza szerszą podstawę." -msgid "Wipe tower purge lines spacing" -msgstr "Odległość między liniami na wieży oczyszczającej" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Rozmieszczenie linii czyszczenia na wieży czyszczącej." - msgid "Maximum wipe tower print speed" msgstr "Maksymalna prędkość drukowania wieży czyszczącej" @@ -13887,7 +16773,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13895,7 +16781,7 @@ msgid "" "regardless of this setting." msgstr "" "Jest to funkcja odpowiedzialna za maksymalną prędkość drukowania podczas " -"oczyszczania w wieży czyszczącej i drukowania jej rzadkich warstw. \n" +"oczyszczania w wieży czyszczącej i drukowania jej rzadkich warstw.\n" "Podczas oczyszczania, jeśli prędkość rzadkiego wypełnienia jest niższa od " "prędkości obliczonej na podstawie maksymalnego natężenia przepływu " "filamentu, to właśnie ta niższa wartość zostanie wybrana.\n" @@ -13912,16 +16798,46 @@ msgstr "" "W przypadku zewnętrznych obwodów wieży czyszczącej prędkość jej obwodu " "wewnętrznego jest niezależna od tego ustawienia." -msgid "Wipe tower extruder" -msgstr "Ekstruder dla wieży czyszczącej" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"Extruder używany do drukowania obrysów wieży czyszczącej. Ustaw na 0, aby " -"użyć tego, który jest dostępny (preferowany jest ten, w którym załadowany " -"jest filament nierozpuszczalny)." +"Extruder używany do drukowania obrysów wieży czyszczącej. Ustaw na " +"„Domyślny”, aby użyć tego, który jest dostępny (preferowany jest ten, w " +"którym załadowany jest filament nierozpuszczalny)." msgid "Purging volumes - load/unload volumes" msgstr "Objętości czyszczenia - objętości ładowania/rozładowania" @@ -13935,6 +16851,18 @@ msgstr "" "danego narzędzia. Te wartości używane są do uproszczenia określenia pełnych " "wartości czyszczenia poniżej" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -13958,44 +16886,77 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "To jest obiekt wykorzystywany do oczyszczenia dyszy po zmianie filamentu, co " "pozwala zaoszczędzić filament i skrócić czas druku. W wyniku tego procesu " "kolory filamentów mogą się wymieszać." msgid "Maximal bridging distance" -msgstr "Maksymalna odległość mostkowania" +msgstr "Maksymalna odległość mostów" msgid "Maximal distance between supports on sparse infill sections." msgstr "" "Maksymalna odległość między podporami na rzadkich sekcjach wypełnienia." +msgid "Wipe tower purge lines spacing" +msgstr "Odległość między liniami na wieży oczyszczającej" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Rozmieszczenie linii czyszczenia na wieży czyszczącej." + +msgid "Extra flow for purging" +msgstr "Dodatkowy przepływ podczas czyszczenia" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Dodatkowy przepływ stosowany w ekstruzjach na wieży czyszczącej. Powoduje " +"to, że linie czyszczące są grubsze lub cieńsze niż standardowo. Odstępy " +"regulowane są automatycznie." + +msgid "Idle temperature" +msgstr "Temperatura w bezczynności" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Temperatura dyszy, gdy narzędzie nie jest aktualnie używane w konfiguracjach " +"wielonarzędziowych. Jest to używane tylko wtedy, gdy „Zapobieganie " +"wyciekaniu” jest aktywne w ustawieniach druku. Wartość zero wyłącza tę " +"funkcję." + msgid "X-Y hole compensation" msgstr "Kompensacja otworów X-Y" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Otwory obiektu będą powiększane lub zmniejszane w płaszczyźnie XY przez " "zadaną wartość (ujemna = zmniejszenie, dodatnia = zwiększenie). Funkcja ta " -"jest używana do lekkiej regulacji rozmiaru, gdy obiekt ma problem z montażem" +"jest używana do lekkiej regulacji rozmiaru, gdy obiekt ma problem z montażem." msgid "X-Y contour compensation" msgstr "Kompensacja konturu X-Y" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"Model zostanie zmniejszony lub zwiększony w osiach X i Y o zadaną wartość " -"(ujemna = zmniejszenie, dodatnia = zwiększenie). Może być przydatne przy " -"kalibracji średnic otworów" +"Kontury obiektów będą się powiększać lub pomniejszać w płaszczyźnie XY o " +"ustawioną wartość. Wartości dodatnie powiększają kontury, wartości ujemne je " +"pomniejszają. Ta funkcja służy do drobnej korekty rozmiarów, gdy obiekty " +"mają problemy z dopasowaniem." msgid "Convert holes to polyholes" msgstr "Konwertuj otwory na poligonalne" @@ -14018,7 +16979,7 @@ msgstr "Margines wykrywania poliotworów" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -14042,14 +17003,14 @@ msgid "" "following format: \"XxY, XxY, ...\"" msgstr "" "Rozmiary obrazów do przechowywania w plikach .gcode i .sl1 / .sl1s, w " -"następującym formacie: \"XxY, XxY, ...\"" +"następującym formacie: „XxY, XxY, ...”" msgid "Format of G-code thumbnails" msgstr "Format miniatur G-code" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Format miniatur G-code: PNG dla najlepszej jakości, JPG dla najmniejszego " "rozmiaru, QOI dla oprogramowania o niskiej pamięci" @@ -14060,28 +17021,25 @@ msgstr "" "wartości dla Extrudera" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" -"Względna ekstruzja jest zalecana przy użyciu opcji \"label_objects\". " -"Niektóre extrudery działają lepiej z tą opcją odznaczoną (tryb absolutnej " -"ekstruzji). Wieża czyszcząca jest kompatybilna tylko z trybem względnym. " -"Zalecana na większości drukarek. Domyślnie zaznaczone" +"Względna ekstruzja jest zalecana przy użyciu opcji „label_objects”. Niektóre " +"extrudery działają lepiej z tą opcją odznaczoną (tryb absolutnej ekstruzji). " +"Wieża czyszcząca jest kompatybilna tylko z trybem względnym. Zalecana na " +"większości drukarek. Domyślnie zaznaczone" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Klasyczny generator ścian tworzy ściany o stałej szerokości ekstruzji, a do " "bardzo cienkich obszarów używa wypełnienia szczelin. Silnik Arachne generuje " "ściany o zmiennej szerokości ekstruzji" -msgid "Classic" -msgstr "Klasyczny" - msgid "Arachne" msgstr "Arachne" @@ -14091,7 +17049,7 @@ msgstr "Długość przejścia ściany" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Podczas przechodzenia między różnymi liczbami obrysów, gdy część staje się " "cieńsza, przydzielana jest pewna ilość miejsca na rozdzielenie lub " @@ -14108,7 +17066,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Unikaj zmiany między zbyt grubą a zbyt cienką ścianą. Ten margines rozszerza " "zakres szerokości ekstruzji na [Minimalną szerokość ściany - margines, 2 * " @@ -14127,7 +17085,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Kiedy tworzyć przejścia między parzystą i nieparzystą liczbą obrysów. " "Kształt klina o kącie większym niż to ustawienie nie będzie miał przejść, a " @@ -14141,7 +17099,7 @@ msgstr "Liczba rozdzielanych ścian" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Ilość ścian, licząc od środka, na których należy rozłożyć zmienność. Niższe " "wartości oznaczają, że zewnętrzne ściany nie zmieniają szerokości" @@ -14151,14 +17109,10 @@ msgstr "Minimalny rozmiar detalu" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minimalna grubość cienkich detali. Detale modelu, które są cieńsze niż ta " -"wartość, nie będą drukowane, natomiast detale grubsze niż minimalny rozmiar " -"detalu zostaną poszerzone do minimalnej szerokości ściany. Jest to wyrażone " -"jako procent średnicy dyszy" msgid "Minimum wall length" msgstr "Minimalna szerokość ściany" @@ -14168,9 +17122,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Zmodyfikuj tę wartość, aby uniknąć drukowania krótkich, otwartych ścianek, " @@ -14179,8 +17133,8 @@ msgstr "" "\n" "UWAGA: Ta wartość nie wpłynie na dolne i górne powierzchnie modelu i może " "zapobiec widocznym przerwom na zewnątrz. Aby dostosować czułość określającą, " -"co jest uważane za górną powierzchnię, dostosuj 'Próg jednej ściany' w " -"zaawansowanych ustawieniach poniżej. 'Próg jednej ściany' jest widoczny " +"co jest uważane za górną powierzchnię, dostosuj „Próg jednej ściany” w " +"zaawansowanych ustawieniach poniżej. „Próg jednej ściany” jest widoczny " "tylko wtedy, gdy to ustawienie jest ustawione na wartość wyższą niż domyślna " "wartość 0,5 lub jeśli opcja pojedynczych ścianek na górze jest włączona." @@ -14203,7 +17157,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Szerokość obrysu, który zastąpi cienkie detale modelu (zgodnie z minimalnym " "rozmiarem detalu). Jeśli minimalna szerokość obrysu jest mniejsza niż " @@ -14214,9 +17168,9 @@ msgid "Detect narrow internal solid infill" msgstr "Wykryj wąskie wewnętrzne pełne wypełnienie" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Ta opcja automatycznie wykryje wąski obszar wewnętrznego pełnego " "wypełnienia. Jeśli włączone, zostanie użyty wzór koncentryczny dla tego " @@ -14235,27 +17189,152 @@ msgstr "zbyt duża szerokość linii " msgid " not in range " msgstr " nie w zakresie " +msgid "Export 3MF" +msgstr "Eksportuj 3MF" + +msgid "Export project as 3MF." +msgstr "Eksportuj projekt jako 3MF." + +msgid "Export slicing data" +msgstr "Eksportuj dane slicowania" + +msgid "Export slicing data to a folder." +msgstr "Eksportuj dane slicowania do folderu." + +msgid "Load slicing data" +msgstr "Wczytaj dane cięcia" + +msgid "Load cached slicing data from directory." +msgstr "Załaduj buforowane dane slicowania z katalogu" + +msgid "Export STL" +msgstr "Eksportuj STL" + +msgid "Export the objects as single STL." +msgstr "Eksportuj obiekty jako jeden plik STL." + +msgid "Export multiple STLs" +msgstr "Eksportuj jako wiele plików STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Eksportuj obiekty jako wiele plików STL do katalogu." + +msgid "Slice" +msgstr "Slice" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Slice podłoża: 0-wszystkie podłoża, i-podłoże i, inne-nieważne" + +msgid "Show command help." +msgstr "Pokaż pomoc komendy." + +msgid "UpToDate" +msgstr "Aktualne" + +msgid "Update the config values of 3MF to latest." +msgstr "Zaktualizuj wartości konfiguracji 3MF do najnowszych." + +msgid "downward machines check" +msgstr "Sprawdź kompatybilność wsteczną maszyn" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "Sprawdza, czy aktualna maszyna jest kompatybilna z maszynami z listy" + +msgid "Load default filaments" +msgstr "Załaduj domyślne filamenty" + +msgid "Load first filament as default for those not loaded." +msgstr "" +"Załaduj pierwszy filament jako domyślny dla tych, które nie zostały " +"załadowane" + msgid "Minimum save" msgstr "Minimalne zapisanie" -msgid "export 3mf with minimum size." -msgstr "eksportuj 3mf o minimalnym rozmiarze." +msgid "Export 3MF with minimum size." +msgstr "eksportuj 3MF o minimalnym rozmiarze." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "maksymalna liczba trójkątów na podłoże do slicowania." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "maksymalny czas slicowania na podłoże w sekundach." msgid "No check" msgstr "Brak sprawdzania" -msgid "Do not run any validity checks, such as gcode path conflicts check." +#, fuzzy +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Nie uruchamiaj żadnych testów poprawności, takich jak sprawdzanie konfliktów " -"ścieżek gcode." +"ścieżek G-code." + +msgid "Normative check" +msgstr "Kontrola normatywna" + +msgid "Check the normative items." +msgstr "Sprawdź elementy normatywne." + +msgid "Output Model Info" +msgstr "Informacje o modelu wyjściowym" + +msgid "Output the model's information." +msgstr "Wyświetl informacje o modelu." + +msgid "Export Settings" +msgstr "Ustawienia eksportu" + +msgid "Export settings to a file." +msgstr "Eksportuj ustawienia do pliku." + +msgid "Send progress to pipe" +msgstr "Wyślij postęp do rury" + +msgid "Send progress to pipe." +msgstr "Wyślij postęp do rury." + +msgid "Arrange Options" +msgstr "Opcje aranżacji" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Opcje aranżacji: 0-wyłącz, 1-włącz, inne-auto" + +msgid "Repetition count" +msgstr "Liczba powtórzeń" + +msgid "Repetition count of the whole model." +msgstr "Liczba powtórzeń całego modelu" msgid "Ensure on bed" -msgstr "Zapewnij na łóżku" +msgstr "Zapewnij na stole roboczym" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" -"Podnieś obiekt ponad łóżko, gdy jest częściowo poniżej. Domyślnie wyłączone" +"Podnieś obiekt ponad stół roboczy, gdy jest częściowo poniżej. Domyślnie " +"wyłączone." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Ułóż modele na stole i połącz je w jedną grupę, aby zastosować ustawienia do " +"wszystkich na raz." + +msgid "Convert Unit" +msgstr "Konwertuj jednostkę" + +msgid "Convert the units of model." +msgstr "Konwertuj jednostki modelu" msgid "Orient Options" msgstr "Opcje orientacji" @@ -14266,12 +17345,86 @@ msgstr "Opcje orientacji: 0-wyłącz, 1-włącz, inne-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Kąt obrotu wokół osi Z w stopniach." +msgid "Rotate around X" +msgstr "Obróć wokół osi X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Kąt obrotu wokół osi X w stopniach." + msgid "Rotate around Y" msgstr "Obróć wokół osi Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Kąt obrotu wokół osi Y w stopniach." +msgid "Scale the model by a float factor." +msgstr "Skaluj model przez czynnik zmiennoprzecinkowy" + +msgid "Load General Settings" +msgstr "Załaduj ustawienia ogólne" + +msgid "Load process/machine settings from the specified file." +msgstr "Załaduj ustawienia procesu/maszyny z określonego pliku" + +msgid "Load Filament Settings" +msgstr "Załaduj ustawienia filamentu" + +msgid "Load filament settings from the specified file list." +msgstr "Załaduj ustawienia filamentu z określonej listy plików" + +msgid "Skip Objects" +msgstr "Pomiń obiekty" + +msgid "Skip some objects in this print." +msgstr "Pomiń niektóre obiekty w tym druku" + +msgid "Clone Objects" +msgstr "Powiel obiekty" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"załaduj aktualne ustawienia procesu/maszyny z określonego pliku podczas " +"korzystania z aktualizacji" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Wczytaj najnowsze ustawienia filamentu z pliku, gdy używane są aktualne " +"ustawienia." + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Jeśli włączone, sprawdza, czy bieżąca maszyna jest wstecznie kompatybilna z " +"maszynami z listy." + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "Wczytaj listę montażu" + +msgid "Load assemble object list from config file." +msgstr "Wczytaj listę obiektów montażu z pliku konfiguracyjnego" + msgid "Data directory" msgstr "Katalog danych" @@ -14283,22 +17436,112 @@ msgstr "" "Załaduj i zapisz ustawienia w podanym katalogu. Jest to przydatne do " "utrzymania różnych profili lub dołączania konfiguracji z pamięci sieciowej." -msgid "Load custom gcode" -msgstr "Załaduj własny gcode" +msgid "Output directory" +msgstr "Katalog wyjściowy" -msgid "Load custom gcode from json" -msgstr "Załaduj własny gcode z json" +msgid "Output directory for the exported files." +msgstr "Katalog wyjściowy dla eksportowanych plików." -msgid "Current z-hop" +msgid "Debug level" +msgstr "Poziom debugowania" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Ustawia poziom logowania debugowania. 0:fatal, 1:error, 2:warning, 3:info, 4:" +"debug, 5:trace\n" + +msgid "Enable timelapse for print" +msgstr "Włącz timelapse dla druku" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Jeśli włączone, to cięcie będzie uwzględniać tryb timelapse." + +msgid "Load custom G-code" +msgstr "Załaduj własny G-code" + +msgid "Load custom G-code from json." +msgstr "Załaduj własny G-code z json." + +msgid "Load filament IDs" +msgstr "Wczytaj identyfikatory filamentu" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "Zezwól na użycie wielu kolorów na jednej płycie" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Jeśli włączone, układ pozwoli na użycie wielu kolorów na jednej płycie." + +msgid "Allow rotation when arranging" +msgstr "Zezwól na obracanie podczas rozmieszczania" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Jeśli włączone, pozwoli na obracanie obiektów podczas ich rozmieszczanie." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Unikaj obszaru kalibracji ekstrudera podczas rozmieszczania" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Jeśli włączone, rozmieszczanie obiektów będzie omijać obszar kalibracji " +"ekstrudera podczas ustawiania obiektów" + +msgid "Skip modified G-code in 3MF" +msgstr "Pomiń zmodyfikowany G-code w 3MF" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Pomiń zmodyfikowane pliki gcode w 3MF z profilem ustawień drukarki lub " +"filamentu." + +msgid "MakerLab name" +msgstr "Nazwa MakerLab" + +msgid "MakerLab name to generate this 3MF." +msgstr "Nazwa MakerLab do generowania tego 3MF." + +msgid "MakerLab version" +msgstr "Wersja MakerLab" + +msgid "MakerLab version to generate this 3MF." +msgstr "Wersja MakerLab do generowania tego 3MF." + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Zezwól na cięcie plików 3MF w nowszej wersji" + +msgid "Current Z-hop" msgstr "Bieżący Z-hop" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Zawiera z-hop obecny na początku bloku niestandardowego G-code" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Pozycja ekstrudera na początku bloku niestandardowego G-kodu. Jeśli " "niestandardowy G-code przemieszcza się gdzieś indziej, powinien zostać " @@ -14308,20 +17551,30 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Stan retrakcji na początku bloku niestandardowego G-code. Jeśli " "niestandardowy G-code przesunie oś ekstrudera, powinien zostać zapisany do " "tej zmiennej, aby Snapmaker Orca prawidłowo wykonał retrakcję, gdy odzyska " "kontrolę." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Dodatkowa deretrakcja" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" "Obecnie planowane dodatkowe czyszczenie ekstrudera po powrocie z retrakcji." +msgid "Absolute E position" +msgstr "Pozycja bezwzględna E" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Bieżąca pozycja osi ekstrudera. Używany tylko z bezwzględnym adresowaniem " +"ekstrudera." + msgid "Current extruder" msgstr "Aktualny extruder" @@ -14367,10 +17620,19 @@ msgstr "" msgid "Is extruder used?" msgstr "Czy ekstruder jest używany?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Wektory logiczne określające, czy dany ekstruder jest używany w wydruku" +msgid "Has single extruder MM priming" +msgstr "Umożliwia drukowanie MM z jednym ekstruderem" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Czy w tym wydruku używane są dodatkowe obszary czyszczenia " +"wielomateriałowego?" + msgid "Volume per extruder" msgstr "Objętość na extruder" @@ -14379,10 +17641,10 @@ msgstr "" "Całkowita objętość filamentu wytłoczona przez każdy ekstruder podczas całego " "wydruku" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Całkowita zmiana narzędzia" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Liczba zmian narzędzi podczas druku." msgid "Total volume" @@ -14438,12 +17700,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Zawiera ciąg znaków z informacją o zastosowanej skali dla poszczególnych " "obiektów. Numeracja obiektów zaczyna się od zera (pierwszy obiekt ma indeks " "0).\n" -"Przykład: 'x:100% y:50% z:100'." +"Przykład: „x:100% y:50% z:100%”." msgid "Input filename without extension" msgstr "Podaj nazwę pliku wejściowego bez rozszerzenia" @@ -14451,14 +17713,16 @@ msgstr "Podaj nazwę pliku wejściowego bez rozszerzenia" msgid "Source filename of the first object, without extension." msgstr "Nazwa pliku źródłowego pierwszego obiektu, bez rozszerzenia." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "Wektor składa się z dwóch elementów: współrzędnych x i y punktu. Wartości w " "mm." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "Wektor ma dwa elementy: wymiar x i y obwiedni. Wartości w mm." @@ -14470,7 +17734,7 @@ msgid "" "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" "Wektor punktów otoczki wypukłej pierwszej warstwy. Każdy element ma " -"następujący format: '[x, y]' (x i y są liczbami zmiennoprzecinkowymi w mm)." +"następujący format: „[x, y]” (x i y są liczbami zmiennoprzecinkowymi w mm)." msgid "Bottom-left corner of first layer bounding box" msgstr "Ogranicznik lewego dolnego narożnika obszaru pierwszej warstwy" @@ -14505,6 +17769,9 @@ msgstr "Godzina" msgid "Minute" msgstr "Minuta" +msgid "Second" +msgstr "sekund" + msgid "Print preset name" msgstr "Nazwa profilu druku" @@ -14518,7 +17785,7 @@ msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Nazwy profili filamentu używane do cięcia.\" Zmienna jest wektorem " +"Nazwy profili filamentu używane do cięcia.” Zmienna jest wektorem " "zawierającym jedną nazwę dla każdego extrudera" msgid "Printer preset name" @@ -14533,6 +17800,16 @@ msgstr "Fizyczna nazwa drukarki" msgid "Name of the physical printer used for slicing." msgstr "Nazwa fizycznej drukarki używanej do przygotowywania pliku do druku." +msgid "Number of extruders" +msgstr "Liczba ekstruderów" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Całkowita liczba ekstruderów, niezależnie od tego, czy są one używane w " +"bieżącym wydruku." + msgid "Layer number" msgstr "Numer warstwy" @@ -14540,7 +17817,7 @@ msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" "Indeks aktualnej warstwy uwzględniający zero (pierwsza warstwa ma wartość 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Warstwa Z" msgid "" @@ -14550,7 +17827,7 @@ msgstr "" "Wysokość bieżącej warstwy nad stołem roboczym, mierzona do górnej krawędzi " "warstwy" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Maksymalna warstwa Z" msgid "Height of the last layer above the print bed." @@ -14577,9 +17854,6 @@ msgstr "Generowanie ścieżki narzędzia wypełnienia" msgid "Detect overhangs for auto-lift" msgstr "Wykrywanie nawisów do automatycznego podnoszenia" -msgid "Generating support" -msgstr "Generowanie podpór" - msgid "Checking support necessity" msgstr "Sprawdzanie konieczności użycia podpór" @@ -14600,6 +17874,9 @@ msgstr "" "Wydaje się, że obiekt %s ma %s. Proszę ponownie ustawić obiekt lub włączyć " "generowanie podpór." +msgid "Generating support" +msgstr "Generowanie podpór" + msgid "Optimizing toolpath" msgstr "Optymalizowanie ścieżki narzędzia" @@ -14616,42 +17893,32 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Kompensacja rozmiaru XY obiektu nie będzie używana, ponieważ jest także " "malowany na kolor.\n" "Kompensacja rozmiaru XY nie może być połączona z malowaniem kolorów." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Podpory: generuj ścieżkę narzędzia na warstwie %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Podpory: wykryj nawisy" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" -msgstr "Podpory: Tworzenie miejsc kontaktowych" +msgstr "Podpory: tworzenie miejsc kontaktowych" -msgid "Support: propagate branches" -msgstr "Podpory: rozprzestrzeniaj gałęzie" +msgid "Loading of a model file failed." +msgstr "Nie udało się wczytać pliku modelu." -msgid "Support: draw polygons" -msgstr "Podpory: rysuj poligony" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Podpory: generuj ścieżkę narzędzia" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Podpory: generuj poligony na warstwie %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Podpory: napraw dziury na warstwie %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Podpory: rozprzestrzeniaj gałęzie na warstwie %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Dostarczony plik nie mógł być odczytany, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14659,20 +17926,11 @@ msgstr "" "Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj, ." "amf(.xml)." -msgid "Loading of a model file failed." -msgstr "Ładowanie pliku modelu nie powiodło się." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Dostarczony plik nie mógł być odczytany, ponieważ jest pusty" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." "amf." -msgid "Canceled" -msgstr "Anulowano" - msgid "load_obj: failed to parse" msgstr "load_obj: nie udało się przetworzyć" @@ -14692,7 +17950,7 @@ msgid "This OBJ file couldn't be read because it's empty." msgstr "Ten plik OBJ nie mógł zostać odczytany, ponieważ jest pusty." msgid "Flow Rate Calibration" -msgstr "Kalibracja Natężenie Przepływu" +msgstr "Kalibracja natężenia przepływu" msgid "Max Volumetric Speed Calibration" msgstr "Kalibracja Maks. Prędkości Przepływu" @@ -14730,7 +17988,7 @@ msgstr "Jak używać wyniku kalibracji?" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" -"Możesz zmienić współczynnik Kalibracji Dynamiki Przepływu podczas edycji " +"Możesz zmienić współczynnik kalibracji dynamiki przepływu podczas edycji " "profilu filamentu" msgid "" @@ -14750,10 +18008,10 @@ msgid "Extra info" msgstr "Dodatkowe informacje" msgid "Flow Dynamics" -msgstr "Dynamika Przepływu" +msgstr "Dynamika przepływu" msgid "Flow Rate" -msgstr "Natężenie Przepływu" +msgstr "Natężenie przepływu" msgid "Max Volumetric Speed" msgstr "Maksymalny przepływ" @@ -14764,7 +18022,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Proszę wprowadzić prawidłowe wartości:\n" "Wartość początkowa: >= %.1f\n" @@ -14776,7 +18034,7 @@ msgid "The name cannot be empty." msgstr "Nazwa nie może być pusta." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Nie znaleziono wybranej przedustawionej opcji: %s." msgid "The name cannot be the same as the system preset name." @@ -14788,10 +18046,17 @@ msgstr "Nazwa jest taka sama jak nazwa innego istniejącego ustwienia" msgid "create new preset failed." msgstr "utworzenie nowego profilu nie powiodło się." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" -msgstr "" -"Czy na pewno chcesz anulować bieżącą kalibrację i powrócić do strony głównej?" +msgstr "Czy na pewno anulować bieżącą kalibrację i powrócić do strony głównej?" msgid "No Printer Connected!" msgstr "Żadna drukarka nie jest podłączona!" @@ -14809,7 +18074,7 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "To urządzenie może przechowywać tylko 16 wyników w historii dla jednej " @@ -14817,14 +18082,11 @@ msgstr "" "kalibrację lub kontynuować, ale nie będzie można tworzyć nowych wyników " "kalibracji. Czy nadal chcesz kontynuować kalibrację?" -msgid "Connecting to printer..." -msgstr "Łączenie z drukarką..." - -msgid "The failed test result has been dropped." -msgstr "Nieudany wynik testu został odrzucony." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Wynik Kalibracji Dynamiki Przepływu został zapisany w drukarce" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -14832,8 +18094,15 @@ msgid "" "Only one of the results with the same name is saved. Are you sure you want " "to override the historical result?" msgstr "" -"W historii kalibracji istnieje już wynik o nazwie: %s. Czy na pewno chcesz " -"zastąpić poprzedni wynik?" +"W historii kalibracji istnieje już wynik o nazwie: %s. Czy na pewno zastąpić " +"poprzedni wynik?" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" #, c-format, boost-format msgid "" @@ -14843,20 +18112,29 @@ msgstr "" "To urządzenie może przechowywać tylko %d wyników w historii dla jednej " "dyszy. Ten wynik nie zostanie zapisany." +msgid "Connecting to printer..." +msgstr "Łączenie z drukarką..." + +msgid "The failed test result has been dropped." +msgstr "Odrzucono nieudany wynik testu." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Wynik kalibracji dynamiki przepływu został zapisany w drukarce" + msgid "Internal Error" msgstr "Błąd wewnętrzny" msgid "Please select at least one filament for calibration" msgstr "Proszę wybrać co najmniej jeden filament do kalibracji" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "Wynik kalibracji natężenia przepływu został zapisany w profilu" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "Wynik kalibracji maksymalnego przepływu został zapisany do profilu" msgid "When do you need Flow Dynamics Calibration" -msgstr "Kiedy potrzebujesz Kalibracji Dynamiki Przepływu" +msgstr "Kiedy potrzebujesz kalibracji dynamiki przepływu" msgid "" "We now have added the auto-calibration for different filaments, which is " @@ -14864,19 +18142,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Teraz dodaliśmy automatyczną kalibrację dla różnych filamentów, która jest w " -"pełni zautomatyzowana, a wynik zostanie zapisany w drukarce do przyszłego " -"użycia. Musisz przeprowadzić kalibrację tylko w następujących ograniczonych " -"przypadkach:\n" -"1. Jeśli wprowadzasz nowy filament innej marki/modelu lub filament jest " -"wilgotny;\n" -"2. Jeśli dysza jest zużyta lub została wymieniona na nową;\n" -"3. Jeśli maksymalna prędkość przepływu lub temperatura druku zostaną " -"zmienione w ustawieniach filamentu." msgid "About this calibration" msgstr "O tej kalibracji" @@ -14904,8 +18173,8 @@ msgstr "" "wiki.\n" "\n" "Zazwyczaj kalibracja nie jest konieczna. Gdy rozpoczynasz druk w jednym " -"kolorze/materiale i zaznaczasz opcję \"kalibracja dynamiki przepływu\" w " -"menu rozpoczęcia druku - drukarka będzie postępować w tradycyjny sposób, " +"kolorze/materiale i zaznaczasz opcję „kalibracja dynamiki przepływu” w menu " +"rozpoczęcia druku - drukarka będzie postępować w tradycyjny sposób, " "kalibrując filament przed rozpoczęciem druku. W przypadku druku w wielu " "kolorach/materiałach drukarka będzie używać domyślnego parametru kompensacji " "dla filamentu podczas każdej jego zmiany, co w większości przypadków daje " @@ -14922,18 +18191,18 @@ msgstr "" "nowych aktualizacjach." msgid "When to use Flow Rate Calibration" -msgstr "Kiedy użyć Kalibracji Natężenia Przepływu" +msgstr "Kiedy użyć kalibracji natężenia przepływu" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Po użyciu kalibracji dynamiki przepływu mogą nadal występować pewne problemy " "z ekstruzją, takie jak:\n" @@ -15026,7 +18295,7 @@ msgid "materials with inaccurate filament diameter" msgstr "filamentami z niedokładną średnicą" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "Znaleźliśmy najlepszy współczynnik Kalibracji Dynamiki Przepływu" +msgstr "Znaleźliśmy najlepszy współczynnik kalibracji dynamiki przepływu" msgid "" "Part of the calibration failed! You may clean the plate and retry. The " @@ -15042,22 +18311,12 @@ msgstr "" "*Zalecamy dodanie do nazwy marki i typu filamentu, a nawet poziomu " "wilgotności" -msgid "Failed" -msgstr "Nieudane" - msgid "Please enter the name you want to save to printer." msgstr "Proszę wprowadzić nazwę, którą chcesz zapisać w drukarce." msgid "The name cannot exceed 40 characters." msgstr "Nazwa nie może przekraczać 40 znaków." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Tylko jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno " -"chcesz zastąpić inne wyniki?" - msgid "Please find the best line on your plate" msgstr "Znajdź najlepszą linię na swojej płycie" @@ -15070,17 +18329,14 @@ msgstr "Wartość wejściowa" msgid "Save to Filament Preset" msgstr "Zapisz do ustawień wstępnych filamentu" -msgid "Preset" -msgstr "Profil" - msgid "Record Factor" -msgstr "Zapisz Współczynnik" +msgstr "Zapisz współczynnik" msgid "We found the best flow ratio for you" -msgstr "Znaleźliśmy dla Ciebie najlepszy Współczynnik Przepływu" +msgstr "Znaleziono najlepszy współczynnik przepływu" msgid "Flow Ratio" -msgstr "Współczynnik Przepływu" +msgstr "Współczynnik przepływu" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "Proszę wprowadzić prawidłową wartość (0,0 < flow ratio < 2,0)" @@ -15107,9 +18363,6 @@ msgstr "Pomiń kalibrację 2" msgid "flow ratio : %s " msgstr "współczynnik przepływu: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Please choose a block with smoothest top surface" - msgid "Please choose a block with smoothest top surface." msgstr "Wybierz blok z najgładszą górną powierzchnią." @@ -15139,22 +18392,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Parametry drukowania" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Typ Płyty" msgid "filament position" msgstr "pozycja filamentu" -msgid "External Spool" -msgstr "Zewnętrzna szpula" - msgid "Filament For Calibration" msgstr "Filament do kalibracji" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Wskazówki dotyczące filamentu kalibracyjnego: \n" "- Materiały, które mogą dzielić tę samą temperaturę podgrzewanego stołu\n" @@ -15174,9 +18442,23 @@ msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" "TPU nie jest obsługiwane dla automatycznej kalibracji dynamiki przepływu." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Łączenie z drukarką" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Od wartości K" @@ -15195,8 +18477,11 @@ msgstr "Z Prędkości Przepływu" msgid "To Volumetric Speed" msgstr "Do Prędkości Przepływu" +msgid "Are you sure you want to cancel this print?" +msgstr "Czy na pewno chcesz anulować to drukowanie?" + msgid "Flow Dynamics Calibration Result" -msgstr "Wyniki Kalibracji Dynamiki Przepływu" +msgstr "Wynik kalibracji dynamiki przepływu" msgid "New" msgstr "Nowy" @@ -15219,7 +18504,14 @@ msgstr "" "To urządzenie może przechowywać tylko %d wyników w historii dla jednej dyszy." msgid "Edit Flow Dynamics Calibration" -msgstr "Edytuj Kalibrację Dynamiki Przepływu" +msgstr "Edytuj kalibrację dynamiki przepływu" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" msgstr "Nowa Kalibracji Dynamiki Przepływu" @@ -15230,6 +18522,12 @@ msgstr "Ok" msgid "The filament must be selected." msgstr "Należy wybrać filament." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Wyszukiwanie w sieci" @@ -15265,15 +18563,12 @@ msgstr "" msgid "PA Calibration" msgstr "Kalibracja PA" -msgid "DDE" -msgstr "DDE" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Typ extrudera" +msgid "DDE" +msgstr "DDE" + msgid "PA Tower" msgstr "Wieża PA" @@ -15292,14 +18587,32 @@ msgstr "Koniec PA: " msgid "PA step: " msgstr "Krok PA: " +msgid "Accelerations: " +msgstr "Przyspieszenia:" + +msgid "Speeds: " +msgstr "Prędkości:" + msgid "Print numbers" msgstr "Drukuj cyfry" +msgid "Comma-separated list of printing accelerations" +msgstr "Wartości przyspieszenia oddzielona przecinkami" + +msgid "Comma-separated list of printing speeds" +msgstr "Wartości prędkości druku oddzielona przecinkami" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Proszę wprowadzić poprawne wartości:\n" "Początek PA: >= 0,0\n" @@ -15309,6 +18622,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Kalibracja temperatury" +msgid "Filament type" +msgstr "Rodzaj filamentu" + msgid "PLA" msgstr "PLA" @@ -15330,9 +18646,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Rodzaj filamentu" - msgid "Start temp: " msgstr "Temp. początkowa: " @@ -15342,16 +18655,15 @@ msgstr "Temp. końcowa: " msgid "Temp step: " msgstr "Krok temp.: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Proszę wprowadzić poprawne wartości:\n" -"Początkowa temp.: <= 350\n" -"Końcowa temp.: >= 170\n" -"Początkowa temp. > Końcowa temp. + 5)" msgid "Max volumetric speed test" msgstr "Test maksymalnego natężenia przepływu" @@ -15362,17 +18674,17 @@ msgstr "Początkowa prędkość przepływu: " msgid "End volumetric speed: " msgstr "Końcowa prędkość przepływu: " -msgid "step: " -msgstr "Krok: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Proszę wprowadzić poprawne wartości:\n" -"start > 0 \n" +"start > 0\n" "krok >= 0\n" "koniec > start + krok)" @@ -15385,14 +18697,17 @@ msgstr "Rozpocznij z prędkością: " msgid "End speed: " msgstr "Zakończ z prędkością: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Proszę wprowadzić poprawne wartości:\n" -"start > 10 \n" +"start > 10\n" "krok >= 0\n" "koniec > start + krok)" @@ -15402,10 +18717,131 @@ msgstr "Długość retrakcji na początku: " msgid "End retraction length: " msgstr "Długość retrakcji na końcu: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Wyślij G-Code do hosta drukarki" msgid "Upload to Printer Host with the following filename:" @@ -15420,12 +18856,11 @@ msgid "Upload to storage" msgstr "Prześlij do pamięci" msgid "Switch to Device tab after upload." -msgstr "Przełącz na zakładkę \"Urządzenie\" po przesłaniu zadania" +msgstr "Przełącz na kartę „Urządzenie” po przesłaniu zadania." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "" -"Przesyłana nazwa pliku nie kończy się z \\\"‪%s‬\\\". Czy chcesz kontynuować?" +msgstr "Nazwa przesyłanego pliku nie kończy się na „U+202A%sU+202C”. Czy kontynuować?" msgid "Upload" msgstr "Załaduj" @@ -15455,17 +18890,36 @@ msgstr "Anuluj wybrane" msgid "Show error message" msgstr "Pokaż komunikat o błędzie" -msgid "Enqueued" +msgid "Queued" msgstr "W kolejce" msgid "Uploading" msgstr "Przesyłanie" -msgid "Cancelling" +msgid "Canceling" msgstr "Anulowanie" msgid "Error uploading to print host" -msgstr "Błąd podczas ładowania do hosta drukarki" +msgstr "Błąd wysyłania do hosta drukarki" + +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Wybrany typ stołu roboczego nie pasuje do pliku. Proszę potwierdzić przed " +"rozpoczęciem druku." + +msgid "Time-lapse" +msgstr "Timelapse" + +msgid "Heated Bed Leveling" +msgstr "Poziomowanie podgrzewanego stołu" + +msgid "Textured Build Plate (Side A)" +msgstr "Textured Build Plate (Strona A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Smooth Build Plate (Strona B)" msgid "Unable to perform boolean operation on selected parts" msgstr "Nie można przeprowadzić operacji boolowskich na siatkach modelu" @@ -15527,14 +18981,14 @@ msgstr "Wersja systemu:" msgid "DNS Server:" msgstr "Serwer DNS:" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Test Snapmaker Orca (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Test Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "Test bing.com" msgid "Test bing.com:" msgstr "Test bing.com:" @@ -15546,7 +19000,7 @@ msgid "Select filament preset" msgstr "Wybierz profil filamentu" msgid "Create Filament" -msgstr "Utwórz Filament" +msgstr "Utwórz filament" msgid "Create Based on Current Filament" msgstr "Utwórz na podstawie bieżącego filamentu" @@ -15558,10 +19012,10 @@ msgid "Basic Information" msgstr "Podstawowe informacje" msgid "Add Filament Preset under this filament" -msgstr "Dodaj Profil Filamentu" +msgstr "Dodaj profil filamentu" msgid "We could create the filament presets for your following printer:" -msgstr "Możemy stworzyć profile filamentu dla twojej następnej drukarki:" +msgstr "Można stworzyć profile filamentu dla następującej drukarki:" msgid "Select Vendor" msgstr "Wybierz dostawcę" @@ -15573,7 +19027,7 @@ msgid "Can't find vendor I want" msgstr "Nie mogę znaleźć potrzebnego dostawcy" msgid "Select Type" -msgstr "Wybierz typ" +msgstr "Wybierz rodzaj" msgid "Select Filament Preset" msgstr "Wybierz profil filamentu" @@ -15598,15 +19052,15 @@ msgstr "" "Nie wprowadzono dostawcy, proszę wprowadzić niestandardowego producenta." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" -"\"Bambu\" lub \"Generic\" nie mogą być używane jako Dostawca dla " +"„Bambu” lub „Generic” nie mogą być używane jako Dostawca dla " "niestandardowych filamentów." msgid "Filament type is not selected, please reselect type." msgstr "Typ filamentu nie jest wybrany, proszę ponownie wybrać typ." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "Seria filamentu nie jest wprowadzona, proszę wprowadzić serie." msgid "" @@ -15621,7 +19075,7 @@ msgstr "" "Wszystkie wprowadzone dane w niestandardowym dostawcy lub serii to spacje. " "Proszę wprowadzić ponownie." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "Dostawca nie może być liczbą. Proszę wprowadzić ponownie." msgid "" @@ -15632,13 +19086,13 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Nazwa filamentu %s, którą utworzyłeś, już istnieje. \n" +"Nazwa filamentu %s, którą utworzyłeś, już istnieje.\n" "Jeśli będziesz kontynuować, utworzony preset będzie wyświetlany pod swoją " -"pełną nazwą. Czy chcesz kontynuować?" +"pełną nazwą. Czy kontynuować?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "Niektóre istniejące profile nie zostały utworzone:\n" @@ -15648,53 +19102,59 @@ msgid "" "Do you want to rewrite it?" msgstr "" "\n" -"Czy chcesz go zastąpić?" +"Czy zastąpić go?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" -"Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, " -"którą wybrałeś\".\n" +"Nazwa profilu zostanie zmieniona na „Dostawca Typ Seria @nazwa drukarki, " +"którą wybrałeś”.\n" "Aby dodać profil dla innych drukarek, przejdź do wyboru drukarki." msgid "Create Printer/Nozzle" -msgstr "Utwórz drukarkę/Dyszę" +msgstr "Utwórz drukarkę/dyszę" msgid "Create Printer" -msgstr "Utwórz Drukarkę" +msgstr "Utwórz drukarkę" msgid "Create Nozzle for Existing Printer" -msgstr "Utwórz Dyszę dla Istniejącej Drukarki" +msgstr "Utwórz dyszę dla Istniejącej drukarki" msgid "Create from Template" -msgstr "Utwórz na podstawie Szablonu" +msgstr "Utwórz na podstawie szablonu" msgid "Create Based on Current Printer" msgstr "Utwórz na podstawie obecnej drukarki" msgid "Import Preset" -msgstr "Importuj Profil wstępny" +msgstr "Importuj profil wstępny" msgid "Create Type" -msgstr "Utwórz Typ" +msgstr "Utwórz rodzaj" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "Nie znaleziono modelu, proszę wybrać dostawcę ponownie." -msgid "Select Model" -msgstr "Wybierz Model" - msgid "Select Printer" msgstr "Wybierz drukarkę" +msgid "Select Model" +msgstr "Wybierz model" + msgid "Input Custom Model" -msgstr "Wprowadź Własny Model" +msgstr "Wprowadź własny model" msgid "Can't find my printer model" msgstr "Nie możesz znaleźć swoich urządzeń" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Prostokąt" @@ -15702,16 +19162,10 @@ msgid "Printable Space" msgstr "Przestrzeń do druku" msgid "Hot Bed STL" -msgstr "Model Stołu " - -msgid "Load stl" -msgstr "Wczytaj stl" +msgstr "Model Stołu" msgid "Hot Bed SVG" -msgstr "Tekstura Stołu" - -msgid "Load svg" -msgstr "Wczytaj svg" +msgstr "Tekstura stołu" msgid "Max Print Height" msgstr "Maksymalna wysokość wydruku" @@ -15724,7 +19178,7 @@ msgid "Exception in obtaining file size, please import again." msgstr "" "Wyjątek podczas uzyskiwania rozmiaru pliku, proszę zaimportuj ponownie." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" "Ścieżka ustawień wstępnych nie została znaleziona, proszę wybrać dostawcę " "ponownie." @@ -15732,26 +19186,23 @@ msgstr "" msgid "The printer model was not found, please reselect." msgstr "Model drukarki nie został znaleziony, proszę wybrać ponownie" -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Średnica dyszy nie została znaleziona, proszę wybrać ponownie." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "Profil drukarki nie został znaleziony, proszę wybrać ponownie." msgid "Printer Preset" -msgstr "Profil Drukarki" +msgstr "Profil drukarki" msgid "Filament Preset Template" -msgstr "Opracuj Profil Filamentu" +msgstr "Opracuj profil filamentu" msgid "Deselect All" -msgstr "Odznacz Wszystko" +msgstr "Odznacz wszystko" msgid "Process Preset Template" -msgstr "Opracuj Profil Procesu" - -msgid "Back Page 1" -msgstr "Poprzednia Strona 1" +msgstr "Opracuj profil procesu" msgid "" "You have not yet chosen which printer preset to create based on. Please " @@ -15764,11 +19215,8 @@ msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." msgstr "" -"W sekcji \"Obszar drukowania\" na pierwszej stronie wprowadzono " -"nieprawidłową wartość. Sprawdź wprowadzone dane przed utworzeniem." - -msgid "The custom printer or model is not inputed, place input." -msgstr "Brakuje niestandardowej drukarki lub modelu, proszę wprowadzić dane." +"W sekcji „Obszar drukowania” na pierwszej stronie wprowadzono nieprawidłową " +"wartość. Sprawdź wprowadzone dane przed utworzeniem." msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -15780,7 +19228,7 @@ msgid "" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" "Profil drukarki o tej nazwie już istnieje. Czy chcesz go zastąpić?\n" -"\tTak: zastąp ustawienia drukarki o tej samej nazwie. \n" +"\tTak: zastąp ustawienia drukarki o tej samej nazwie.\n" "Profile filamentu i procesu bez tej samej nazwy zostaną zarezerwowane.\n" "\tAnuluj: nie twórz profilu i wróć do ekranu tworzenia." @@ -15796,14 +19244,14 @@ msgstr "Tworzenie ustawień filamentu nie powiodło się. Oto szczegóły:\n" msgid "Create process presets failed. As follows:\n" msgstr "Tworzenie ustawień procesu nie powiodło się. Oto szczegóły:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Dostawca nie został znaleziony, proszę wybrać ponownie." msgid "Current vendor has no models, please reselect." msgstr "Obecny dostawca nie ma modeli, proszę wybrać ponownie." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "Nie wybrano dostawcy ani modelu lub nie wprowadzono niestandardowego " @@ -15833,10 +19281,18 @@ msgstr "" "Nie wybrałeś jeszcze drukarki, do której chcesz zamienić dyszę, proszę " "dokonaj wyboru." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Utworzenie profilu drukarki zakończyło się powodzeniem" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Utworzenie profilu filamentu zakończyło się powodzeniem" msgid "Printer Created" @@ -15864,15 +19320,15 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Orca wykrył, że funkcja synchronizacji profili użytkownika nie jest " "włączona, co może skutkować niepoprawnymi ustawieniami filamentu na stronie " -"Urządzenia. Kliknij \"Synchronizuj profile użytkownika\", aby włączyć " -"funkcję synchronizacji." +"Urządzenia. Kliknij „Synchronizuj profile użytkownika”, aby włączyć funkcję " +"synchronizacji." msgid "Printer Setting" msgstr "Ustawienia drukarki" @@ -15893,7 +19349,7 @@ msgid "Process presets(.zip)" msgstr "Profile procesu (.zip)" msgid "initialize fail" -msgstr "błąd inicjalizacji" +msgstr "błąd inicjacji" msgid "add file fail" msgstr "Dodawanie pliku nie powiodło się" @@ -15917,19 +19373,26 @@ msgid "" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" -"Plik '%s' już istnieje w bieżącym katalogu. Czy chcesz go nadpisać?\n" +"Plik „%s” już istnieje w bieżącym katalogu. Czy zastąpić go?\n" "Jeśli nie, zostanie dodany sufiks czasowy do nazwy pliku." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Profil drukarki oraz wszystkie ustawienia filamentu i procesu, które do niej " -"należą. \n" +"należą.\n" "Można je udostępniać innym osobom." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "Profile filamentu.\n" @@ -15982,11 +19445,11 @@ msgstr "Proszę wybierz co chcesz wyeksportować" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "" -"Nie udało się utworzyć tymczasowego folderu. Spróbuj ponownie wyeksportować " -"konfiguracje." +"Nie udało się utworzyć tymczasowego folderu. Proszę spróbować ponownie " +"wyeksportować konfiguracje." msgid "Edit Filament" -msgstr "Edytuj Filament" +msgstr "Edytuj filament" msgid "Filament presets under this filament" msgstr "Dodaj profil filamentu poniżej" @@ -15995,10 +19458,10 @@ msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Uwaga: Jeśli ostatni profil tego filamentu zostanie usunięty, wszystkie " -"ustawienia tego filamentu zostaną skasowane po wyjściu z okna dialogowego." +"Uwaga: Jeśli ostatni profil tego filamentu zostanie usunięty, filament " +"zostanie usunięty po zamknięciu okna dialogowego." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "Nie można usunąć profili dziedziczonych przez inne profile" msgid "The following presets inherits this preset." @@ -16008,28 +19471,34 @@ msgstr[1] "Następujące ustawienia dziedziczą to ustawienie." msgstr[2] "Następujących ustawień dziedziczą to ustawienie." msgid "Delete Preset" -msgstr "Usuń Profil" +msgstr "Usuń profil" + +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Czy na pewno usunąć wybrany profil?\n" +"Jeśli profil odpowiada filamentowi aktualnie używanemu w drukarce, proszę " +"zresetować informacje o filamentach dla tego slotu." msgid "Are you sure to delete the selected preset?" -msgstr "Czy na pewno chcesz usunąć wybrany profil?" +msgstr "Czy na pewno usunąć wybrany profil?" msgid "Delete preset" msgstr "Usuń profil" msgid "+ Add Preset" -msgstr "+ Dodaj Profil" - -msgid "Delete Filament" -msgstr "Usuń Filament" +msgstr "+ Dodaj profil" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Wszystkie ustawienia wstępne filamentu przypisane do tego profilu zostaną " "usunięte.\n" -"Jeśli używasz tego filamentu w swojej drukarce, proszę zresetuj informacje o " +"Jeśli ten filament jest używany w drukarce, proszę przywrócić informacje o " "filamencie dla tego slotu." msgid "Delete filament" @@ -16050,35 +19519,49 @@ msgstr "" "wyboru" msgid "[Delete Required]" -msgstr "[Usuń Wymagane]" +msgstr "[Usuń wymagane]" msgid "Edit Preset" msgstr "Edytuj Profile" msgid "For more information, please check out Wiki" -msgstr "Aby uzyskać więcej informacji, proszę zajrzeć na Wiki" +msgstr "Aby uzyskać więcej informacji, proszę sprawdzić Wiki" msgid "Collapse" msgstr "Zwiń" msgid "Daily Tips" -msgstr "Porada Dnia" +msgstr "Porada dnia" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "zapamiętana dysza: %.1f %s" +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"Średnica Twojej dyszy w profilu nie jest zgodna ze zapamiętaną średnicą " -"dyszy. Czy ostatnio zmieniałeś swoją dyszę?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" -"*Drukowanie filamentu %s z użyciem %s może spowodować uszkodzenie dyszy" msgid "Need select printer" msgstr "Konieczny jest wybór drukarki" @@ -16086,6 +19569,35 @@ msgstr "Konieczny jest wybór drukarki" msgid "The start, end or step is not valid value." msgstr "Wartość początkowa, końcowa lub krokowa jest nieprawidłowa." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -16103,16 +19615,13 @@ msgid "Could not get a valid Printer Host reference" msgstr "Nie można uzyskać ważnego odniesienia do hosta drukarki" msgid "Success!" -msgstr "Sukces!" +msgstr "Powodzenie!" msgid "Are you sure to log out?" -msgstr "Czy na pewno chcesz się wylogować?" - -msgid "Refresh Printers" -msgstr "Odśwież drukarki" +msgstr "Czy na pewno wylogować?" msgid "View print host webui in Device tab" -msgstr "Wyświetl interfejs użytkownika serwera druku w zakładce \"Urządzenie\"" +msgstr "Wyświetl interfejs użytkownika serwera druku w zakładce „Urządzenie”" msgid "Replace the BambuLab's device tab with print host webui" msgstr "" @@ -16147,7 +19656,7 @@ msgstr "" "Store / Keychain)." msgid "Login/Test" -msgstr "Logowanie/Test" +msgstr "Logowanie/test" msgid "Connection to printers connected via the print host failed." msgstr "" @@ -16157,22 +19666,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Niepasujący typ hosta drukowania: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "Połączenie z AstroBox działa poprawnie." msgid "Could not connect to AstroBox" msgstr "Nie udało się połączyć z AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Uwaga: Wymagana jest wersja AstroBox co najmniej 1.1.0." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Połączenie z Duet działa poprawnie." msgid "Could not connect to Duet" msgstr "Nie udało się połączyć z Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Wystąpił nieznany błąd" msgid "Wrong password" @@ -16184,7 +19693,7 @@ msgstr "Nie udało się uzyskać zasobów do utworzenia nowego połączenia" msgid "Upload not enabled on FlashAir card." msgstr "Przesyłanie nie jest włączone na karcie FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "Połączenie z FlashAir działa poprawnie, a przesyłanie jest włączone." msgid "Could not connect to FlashAir" @@ -16197,28 +19706,28 @@ msgstr "" "Uwaga: Wymagany jest FlashAir z oprogramowaniem 2.00.02 lub nowszym oraz " "aktywowaną funkcją przesyłania." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "Połączenie z MKS działa poprawnie." msgid "Could not connect to MKS" msgstr "Nie udało się połączyć z MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "Połączenie z OctoPrint działa poprawnie." msgid "Could not connect to OctoPrint" msgstr "Nie udało się połączyć z OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Uwaga: Wymagana jest wersja OctoPrint co najmniej 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Połączenie z Prusa SL1 / SL1S działa poprawnie." msgid "Could not connect to Prusa SLA" msgstr "Nie udało się połączyć z Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "Połączenie z PrusaLink działa poprawnie." msgid "Could not connect to PrusaLink" @@ -16243,19 +19752,19 @@ msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" "Przesyłanie nie powiodło się. Nie znaleziono odpowiedniego nośnika w %1%.." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Połączenie z Prusa Connect działa poprawnie." msgid "Could not connect to Prusa Connect" msgstr "Nie udało się połączyć z Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Połączenie z Repetier działa poprawnie." msgid "Could not connect to Repetier" msgstr "Nie udało się połączyć z Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Uwaga: Wymagana jest wersja Repetier co najmniej 0.90.0." #, boost-format @@ -16264,7 +19773,7 @@ msgid "" "Message body: \"%2%\"" msgstr "" "Status HTTP: %1%\n" -"Treść wiadomości: \"%2%\"" +"Treść wiadomości: „%2%”" #, boost-format msgid "" @@ -16273,8 +19782,8 @@ msgid "" "Error: \"%2%\"" msgstr "" "Analiza odpowiedzi hosta nie powiodła się.\n" -"Treść wiadomości: \"%1%\"\n" -"Błąd: \"%2%\"" +"Treść wiadomości: „%1%”\n" +"Błąd: „%2%”" #, boost-format msgid "" @@ -16283,12 +19792,12 @@ msgid "" "Error: \"%2%\"" msgstr "" "Wyliczenie drukarek hosta nie powiodło się.\n" -"Treść wiadomości: \"%1%\"\n" -"Błąd: \"%2%\"" +"Treść wiadomości: „%1%”\n" +"Błąd: „%2%”" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Ta niska wysokość warstwy prowadzi do praktycznie niewidocznych warstw i " "wysokiej jakości wydruku. Nadaje się do większości standardowych przypadków " @@ -16296,8 +19805,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.2 mm, ma niższe " "prędkości i przyspieszenia, a wzorzec rzadkiego wypełnienia to Gyroidalny. " @@ -16305,8 +19814,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.2 mm, ma " "nieznacznie większą wysokość warstwy, co skutkuje praktycznie " @@ -16314,8 +19823,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.2 mm, ma większą " "wysokość warstwy, co skutkuje lekko widocznymi liniami warstw, ale krótszym " @@ -16323,18 +19831,15 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"W porównaniu z domyślnym profilem dyszy o średnicy 0.2 mm, ma mniejszą " -"wysokość warstwy, co prowadzi do praktycznie niewidocznych linii warstw i " -"wyższej jakości druku, ale wydłuża czas druku." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "W porównaniu z domyślnym profilem dyszy 0.2 mm, ma mniejszą wysokość " "warstwy, niższe prędkości i przyspieszenie, oraz wzór wypełnienia jest " @@ -16342,37 +19847,34 @@ msgstr "" "jakości druku, ale znacznie wydłuża czasu druku." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"W porównaniu ze standardowym profilem dyszy o średnicy 0.2 mm, ten profil ma " -"mniejszą wysokość warstwy, co prowadzi do praktycznie niewidocznych linii " -"warstw i znacznie wyższa jakość wydruku, ale jednocześnie wydłuża jego czas." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "W porównaniu ze standardowym profilem dyszy o średnicy 0.2 mm, ma on " "mniejszą wysokość warstwy, niższe prędkości i przyspieszenia, a także " -"zastosowany jest wzór wypełnienia Gyroid. To prowadzi do praktycznie " +"zastosowany jest wzór wypełnienia Gyroidalny. To prowadzi do praktycznie " "niewidocznych warstw i znacznie lepszej jakości wydruku, ale jednocześnie " "wydłuża jego czas." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Ta standardowa wysokość warstwy zapewnia normalną jakość druku, odpowiednią " "dla większości standardowych przypadków druku." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "W porównaniu ze standardowym profilem dla dyszy o średnicy 0.4 mm, ten " "profil ma więcej obwodów i większą gęstość wypełnienia. To zwiększa " @@ -16381,8 +19883,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "W porównaniu ze standardowym profilem dla dyszy o średnicy 0.4 mm, ten " "profil ma większą wysokość warstwy. W rezultacie warstwy są bardziej " @@ -16391,8 +19893,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "W porównaniu ze standardowym profilem dla dyszy o średnicy 0.4 mm, ten " "profil ma większą wysokość warstwy. W rezultacie warstwy są bardziej " @@ -16400,8 +19902,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.4 mm, ten profil ma " "mniejszą wysokość warstwy. W rezultacie warstwy są mniej widoczne, co " @@ -16410,8 +19912,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.4 mm, ten profil ma " "mniejszą wysokość warstwy, niższe prędkości i przyspieszenia, oraz wzór " @@ -16420,8 +19922,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.4 mm, ten profil ma " "mniejszą wysokość warstwy. W rezultacie warstwy są prawie niewidoczne, co " @@ -16430,8 +19932,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.4 mm, ten profil ma " "mniejszą wysokość warstwy, niższe prędkości i przyspieszenia, a także " @@ -16441,24 +19943,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.4 mm, ten profil ma " "mniejszą wysokość warstwy. W rezultacie warstwy są prawie niewidoczne, co " "prowadzi do wyższej jakości druku, ale wydłużenia jego czas." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Ta wyższa wysokość warstwy, skutkuje widocznymi liniami warstw i zwykłą " "jakością i czasem druku." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.6 mm, ten profil ma " "więcej obwodów i większą gęstość wypełnienia. Skutkuje to zwiększeniem " @@ -16467,8 +19968,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.6 mm, ten profil ma " "większą wysokość warstwy. Skutkuje to bardziej zauważalnymi warstwami i " @@ -16477,8 +19978,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.6 mm, ten profil ma " "większą wysokość warstwy. Skutkuje to bardziej zauważalnymi warstwami i " @@ -16487,8 +19988,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.6 mm, ten profil ma " "mniejszą wysokość warstwy. W rezultacie warstwy są mniej zauważalne, co " @@ -16497,45 +19998,34 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.6 mm, ten profil ma " "mniejszą wysokość warstwy. W rezultacie warstwy są mniej zauważalne, co " "prowadzi do wyższej jakości druku, ale wydłuża jego czas." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Ta bardzo duża wysokość warstwy skutkuje wyraźnie widocznymi liniami warstw, " -"niską jakością druku, a także standardowym czasem druku." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"W porównaniu z domyślnym profilem dla dyszy o średnicy 0.8 mm, ten profil ma " -"nieco większą wysokość warstwy. W rezultacie są to wyraźnie widoczne warstwy " -"i znacznie niższa jakość druku, ale w niektórych przypadkach skraca to czas " -"wydruku." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"W porównaniu z domyślnym profilem dla dyszy o średnicy 0,8 mm, ten profil ma " -"znacznie większą wysokość warstwy. W rezultacie warstwy są bardzej widoczne, " -"a jakość druku znacznie niższa, ale w niektórych przypadkach znacznie skraca " -"się czas wydruku." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "W porównaniu z domyślnym profilem dla dyszy o średnicy 0,8 mm, ten profil ma " "nieco mniejszą wysokość warstwy. W rezultacie warstwy są nieco mniej " @@ -16544,13 +20034,320 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Brak AMS" + +msgid "There is no device available to send printing." +msgstr "Brak dostępnego urządzenia lub nie zostało wybrane." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "Liczba używanych jednocześnie drukarek nie może być równa 0." + +msgid "Use External Spool" +msgstr "Użyj zewnętrznej szpuli" + +msgid "Select Printers" +msgstr "Wybierz drukarki" + +msgid "Device Name" +msgstr "Nazwa urządzenia" + +msgid "Device Status" +msgstr "Status urządzenia" + +msgid "AMS Status" +msgstr "Status AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Proszę wybrać urządzenia, którymi chciałbyś tutaj zarządzać (do 6 urządzeń)" + +msgid "Printing Options" +msgstr "Opcje drukowania" + +msgid "Bed Leveling" +msgstr "Poziomowanie stołu" + +msgid "Flow Dynamic Calibration" +msgstr "Kalibracja dynamiki przepływu" + +msgid "Send Options" +msgstr "Opcje wysyłania" + +msgid "Send to" +msgstr "Wyślij do" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"drukarek jednocześnie. (Zależy to od liczby urządzeń, które można podgrzewać " +"jednocześnie.)" + +msgid "Wait" +msgstr "Czekaj" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minut na każdą partię. (Zależy od tego, jak długo trwa proces nagrzewania.)" + +msgid "Task Sending" +msgstr "Wysyłanie zadań" + +msgid "Task Sent" +msgstr "Wysłane do druku" + +msgid "Edit multiple printers" +msgstr "Edycja drukarek" + +msgid "Select connected printers (0/6)" +msgstr "Wybierz podłączone drukarki (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Wybierz Podłączone Drukarki (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Maksymalna liczba drukarek, które można wybrać, to %d" + +msgid "No task" +msgstr "Brak zadania" + +msgid "Edit Printers" +msgstr "Edycja drukarek" + +msgid "Task Name" +msgstr "Nazwa zadania" + +msgid "Actions" +msgstr "Działania" + +msgid "Task Status" +msgstr "Status Zadania" + +msgid "Sent Time" +msgstr "Czas wysłania" + +msgid "There are no tasks to be sent!" +msgstr "Brak zadań do wysłania!" + +msgid "No historical tasks!" +msgstr "Brak historii zadań!" + +msgid "Upgrading" +msgstr "Aktualizacja" + +msgid "syncing" +msgstr "synchronizacja" + +msgid "Printing Finish" +msgstr "Drukowanie zakończone" + +msgid "Printing Failed" +msgstr "Drukowanie nie powiodło się" + +msgid "Printing Pause" +msgstr "Drukowanie wstrzymane" + +msgid "Pending" +msgstr "W toku" + +msgid "Sending" +msgstr "Wysyłanie" + +msgid "Sending Finish" +msgstr "Wysłanie ukończone" + +msgid "Sending Cancel" +msgstr "Anulowano wysyłanie" + +msgid "Sending Failed" +msgstr "Wysyłanie nieudane" + +msgid "Print Success" +msgstr "Pomyślnie wydrukowano" + +msgid "Print Failed" +msgstr "Drukowanie nie powiodło się" + +msgid "Removed" +msgstr "Usunięto" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"W porównaniu z domyślnym profilem dla dyszy o średnicy 0,8 mm, ten profil ma " -"mniejszą wysokość warstwy, co prowadzi do mniejszych, ale nadal widocznych " -"warstw i lepszej jakości druku, a w niektórych przypadkach może się wydłużyć " -"czas wydruku." msgid "Connected to Obico successfully!" msgstr "Pomyślnie połączono z SimplyPrint!" @@ -16575,11 +20372,11 @@ msgstr "" "Nie połączono z kontem SimplyPrint. Przejdź do opcji Połącz, aby go " "skonfigurować." -msgid "Connection to Flashforge works correctly." -msgstr "Połączenie z Flashforge działa poprawnie." +msgid "Serial connection to Flashforge is working correctly." +msgstr "" -msgid "Could not connect to Flashforge" -msgstr "Nie można połączyć się z Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "" msgid "The provided state is not correct." msgstr "Podany stan nie jest właściwy" @@ -16591,9 +20388,114 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Wystąpił problem podczas próby logowania, proszę spróbować ponownie." -msgid "User cancelled." +msgid "User canceled." msgstr "Anulowane przez użytkownika." +msgid "Head diameter" +msgstr "Średnica łącznika" + +msgid "Max angle" +msgstr "Maksymalny kąt" + +msgid "Detection radius" +msgstr "Promień wykrywania" + +msgid "Remove selected points" +msgstr "Usuń zaznaczone punkty" + +msgid "Remove all" +msgstr "Usuń wszystkie" + +msgid "Auto-generate points" +msgstr "Generuj punkty automatycznie" + +msgid "Add a brim ear" +msgstr "Dodaj ucho brim" + +msgid "Delete a brim ear" +msgstr "Usuń ucho brim" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "Widok przekroju" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Ostrzeżenie: rodzaj brimu nie jest ustawiony na „malowane”. Uszy brim nie " +"będą działać!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " nieprawidłowe uszy brim" + +msgid "Brim Ears" +msgstr "Uszy brim" + +msgid "Please select single object." +msgstr "Proszę wybrać pojedynczy obiekt." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "Kontynuacja" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16601,7 +20503,7 @@ msgid "" "consistency?" msgstr "" "Precyzyjna ściana\n" -"Czy wiesz, że włączenie \"ściany o wysokiej precyzji\" może poprawić ich " +"Czy wiesz, że włączenie „ściany o wysokiej precyzji” może poprawić ich " "jakość i spójność warstw?" #: resources/data/hints.ini: [hint:Sandwich mode] @@ -16673,11 +20575,11 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Jak korzystać ze skrótów klawiszowych\n" "Czy wiesz, że Snapmaker Orca oferuje szeroki zakres skrótów klawiszowych i " -"operacji na scenie 3D." +"operacji na scenie 3D?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16686,8 +20588,8 @@ msgid "" "the surface quality of your overhangs?" msgstr "" "Odwróć na nieparzystych\n" -"Czy wiesz, że funkcja Odwróć na nieparzystych może znacząco poprawić " -"jakość powierzchni twoich występów?" +"Czy wiesz, że funkcja Zmień kierunek na nieparzystych może znacząco " +"poprawić jakość powierzchni twoich występów?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16715,12 +20617,12 @@ msgid "" "Did you know that you can generate a timelapse video during each print?" msgstr "" "Timelapse\n" -"Czy wiesz, że możesz generować wideo timelapse podczas każdego druku?" +"Czy wiesz, że możesz generować filmy timelapse podczas każdego wydruku?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatyczne rozmieszczanie\n" "Czy wiesz, że możesz automatycznie rozmieścić wszystkie obiekty w swoim " @@ -16730,7 +20632,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Automatyczna orientacja\n" "Czy wiesz, że możesz obracać obiekty do optymalnej orientacji do druku za " @@ -16910,7 +20812,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Brim dla lepszej przyczepności\n" @@ -16921,7 +20823,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Ustawianie parametrów dla wielu obiektów\n" "Czy wiesz, że możesz ustawić parametry cięcia dla wszystkich wybranych " @@ -16938,8 +20840,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Czyszczenie do podpór/obiektów/wypełnienia\n" "Czy wiesz, że możesz zaoszczędzić marnowany filament, przepłukując go do " @@ -16955,15 +20857,15 @@ msgstr "" "Czy wiesz, że możesz użyć więcej pętli ścian i większej gęstości " "wypełnienia, aby zwiększyć wytrzymałość modelu?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"Kiedy należy drukować przy otwartych drzwiach drukarki? \n" +"Kiedy należy drukować przy otwartych drzwiach drukarki?\n" "Czy wiesz, że otwarcie drzwiczek drukarki może zmniejszyć prawdopodobieństwo " "zatkania ekstrudera/hotendu podczas drukowania filamentem o niższej " "temperaturze gdy temperatura obudowy jest wyższa? Więcej informacji na ten " @@ -16974,12 +20876,1693 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Unikaj odkształceń\n" "Czy wiesz, że podczas drukowania filamentami podatnymi na odkształcenia, " "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może " -"zmniejszyć prawdopodobieństwo odkształceń." +"zmniejszyć prawdopodobieństwo odkształceń?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptacyjna wysokość warstwy" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Włączenie tej opcji oznacza, że wysokość warstwy podpory drzewo, z " +#~ "wyjątkiem pierwszej, zostanie automatycznie obliczona " + +#~ msgid "AMS not connected" +#~ msgstr "AMS niepodłączony" + +#~ msgid "Ext Spool" +#~ msgstr "zew.szpula" + +#~ msgid "Guide" +#~ msgstr "Instr." + +#~ msgid "Calibrating AMS..." +#~ msgstr "Kalibracja AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Wystąpił problem podczas kalibracji. Kliknij, aby zobaczyć rozwiązanie." + +#~ msgid "Calibrate again" +#~ msgstr "Kalibruj ponownie" + +#~ msgid "Cancel calibration" +#~ msgstr "Anuluj kalibrację" + +#~ msgid "Feed Filament" +#~ msgstr "Podaj filament" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Przed drukowaniem przez LAN należy włożyć kartę SD." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Przed wysłaniem do drukarki należy włożyć kartę SD." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Uwaga: można wybierać tylko sloty AMS załadowane tym samym rodzajem " +#~ "filamentu." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "W przypadku, gdy podczas drukowania w systemie AMS zużyje się jeden z " +#~ "filamentów, system automatycznie przełączy na drugi identyczny filament.\n" +#~ "(System obecnie wspiera automatyczne przełączanie na materiały " +#~ "eksploatacyjne tej samej marki, rodzaju i koloru)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS oszacuje pozostałą ilość filamentu Bambu po aktualizacji informacji o " +#~ "filamencie. Podczas drukowania, pozostała ilość na szpuli będzie " +#~ "aktualizowana automatycznie." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Zalecana temperatura jest poniżej minimalnych 190 stopni lub temperatura " +#~ "przekracza zalecane maksimum 300 stopni.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Tryb Wazy działa tylko wtedy gdy liczba pętli ściany wynosi 1, wyłączone " +#~ "są podpory, liczba warstw górnej powłoki wynosi 0, gęstość wypełnienia " +#~ "wynosi 0, a rodzaj timelapse ustalony jest na tradycyjny." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Pomiar rezonansu osi XY" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pauza z powodu wyczerpania filamentu" + +#~ msgid "Heating hotend" +#~ msgstr "Nagrzewanie dyszy" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Kalibracja ekstruzji" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Drukowanie zostało wstrzymane przez użytkownika" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pauza - osłona głowicy drukującej odpadła" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Kalibracja przepływu ekstruzji" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pauza z powodu awarii temperatury dyszy" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pauza z powodu awarii temperatury stołu" + +#~ msgid "Skip step pause" +#~ msgstr "Pauza pominięcia kroku" + +#~ msgid "Motor noise calibration" +#~ msgstr "Kalibracja hałasu silnika" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pauza z powodu utraty AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Wstrzymano z powodu niskiej prędkości wentylatora chłodzącego hotend" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pauza z powodu błędu kontroli temperatury komory" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pauza spowodowana wstawionym przez użytkownika G-code" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Wstrzymanio z powodu pokrycia dyszy filamentem" + +#~ msgid "Cutter error pause" +#~ msgstr "Wstrzymanio z powodu błędu noża" + +#~ msgid "First layer error pause" +#~ msgstr "Wstrzymanio z powodu błędu pierwszej warstwy" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Wstrzymano z powodu zatkania dyszy" + +#~ msgid "Fatal" +#~ msgstr "Krytyczny" + +#~ msgid "Serious" +#~ msgstr "Poważny" + +#~ msgid "Common" +#~ msgstr "Wspólny" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Aktualna temperatura komory lub docelowa temperatura komory przekracza " +#~ "45℃. Aby uniknąć zatkania extrudera, niedopuszczalne jest ładowanie " +#~ "filamentu o niskiej temperaturze (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "W extruderze jest załadowany filament o niskiej temperaturze (PLA/PETG/" +#~ "TPU). Aby uniknąć zatkania extrudera, nie wolno ustawiać temperatury " +#~ "komory powyżej 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF nie jest obsługiwane przez AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Obiekt jest umieszczony poza granicą płyty lub przekracza limit " +#~ "wysokości.\n" +#~ "Rozwiąż problem, przesuwając go całkowicie na płytę lub poza nią oraz " +#~ "potwierdzając, że wysokość mieści się w obszarze roboczym." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Możesz znaleźć go w sekcji \"Ustawienia > Sieć > Kod połączenia\"\n" +#~ "na drukarce, jak pokazano na rysunku:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Przeglądanie plików na karcie SD nie jest obsługiwane w bieżącym " +#~ "oprogramowaniu. Proszę zaktualizować oprogramowanie drukarki." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Sprawdź, czy karta SD jest włożona do drukarki.\n" +#~ "Jeśli dalej jest problem z odczytem, spróbuj sformatować kartę SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "Przeglądanie plików na karcie SD nie jest obsługiwane w trybie tylko LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Pamięć niedostępna, wstaw kartę SD." + +#~ msgid "Cham" +#~ msgstr "Komora" + +#~ msgid "Still unload" +#~ msgstr "Wycofaj" + +#~ msgid "Still load" +#~ msgstr "Podaj" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Nie można rozpocząć bez karty SD." + +#~ msgid "Update" +#~ msgstr "Aktualizacja" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Czułość pauzy wynosi" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Brak odczytu filamentów w AMS. Aby wyświetlić informacje AMS, wybierz " +#~ "drukarkę na stronie Urządzenia." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Synchronizacja filamentów z AMS usunie wszystkie obecnie wybrane profile " +#~ "filamentu i koloru. Czy kontynuować?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Synchronizacja została już wykonana. Chcesz synchronizować tylko zmiany " +#~ "czy zaktualizować wszystko ponownie?" + +#~ msgid "Sync" +#~ msgstr "Tylko zmiany" + +#~ msgid "Resync" +#~ msgstr "Zaktualizuj wszystko" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Istnieją nieznane filamenty przypisane do ogólnych profili. Proszę " +#~ "zaktualizować Snapmaker Orca lub zrestartować go, aby sprawdzić dostępność " +#~ "aktualizacji profili systemowych." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Czy na pewno chcesz przechowywać oryginalne pliki SVG wraz z ich " +#~ "lokalnymi ścieżkami w pliku 3MF?\n" +#~ "Jeśli wybierzesz „NIE”, wszystkie pliki SVG w projekcie przestaną być " +#~ "edytowalne." + +#~ msgid "Private protection" +#~ msgstr "Ochrona prywatności" + +#~ msgid "General Settings" +#~ msgstr "Ustawienia ogólne" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Wyświetlanie powiadomienia „Porada dnia” po uruchomieniu" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Wyświetla przydatne wskazówki po uruchamianiu programu." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Objętości płukania: automatyczne obliczanie po każdej zmianie koloru" + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Jeśli włączone, automatyczne obliczanie za każdym razem, gdy zmieni się " +#~ "kolor" + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Objętości płukania: automatyczne obliczanie po każdej zmianie filamentu" + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Jeśli ta opcja jest włączona, automatycznie obliczaj za każdym razem, gdy " +#~ "zmieniany jest filament." + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Automatyczne rozmieszcza obiekty na płycie po ich powieleniu" + +#~ msgid "Network" +#~ msgstr "Sieć" + +#~ msgid "User Sync" +#~ msgstr "Synchronizacja użytkownika" + +#~ msgid "System Sync" +#~ msgstr "Synchronizacja systemu" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Powiąż URL z Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "co" + +#~ msgid "Downloads" +#~ msgstr "Położenie pobierania" + +#~ msgid "Dark Mode" +#~ msgstr "Tryb ciemny" + +#~ msgid "Home page and daily tips" +#~ msgstr "Strona główna i porada dnia" + +#~ msgid "Show home page on startup" +#~ msgstr "Pokaż stronę główną przy uruchamianiu" + +#~ msgid "Please choose the filament color" +#~ msgstr "Proszę wybrać kolor filamentu" + +#~ msgid "Send print job to" +#~ msgstr "Wyślij zadanie druku do" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s przekracza liczbę slotów AMS. Proszę zaktualizować " +#~ "oprogramowanie drukarki, aby obsługiwało przypisywanie slotów AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament przekracza liczbę slotów AMS. Proszę zaktualizować " +#~ "oprogramowanie drukarki, aby obsługiwało przypisywanie slotów AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Ustalono przyporządkowanie filamentów do gniazd w AMS. Możesz kliknąć na " +#~ "dowolny filament powyżej, aby zmienić jego przypisanie do innego gniazda " +#~ "w AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Proszę kliknąć na każdy filament powyżej, aby określić jego przypisany " +#~ "slot AMS przed wysłaniem zadania druku" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Oprogramowanie drukarki obsługuje tylko sekwencyjne mapowanie filamentu " +#~ "=> slot AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Przed rozpoczęciem drukowania należy włożyć kartę SD." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Aby nagrywać timelapse, należy włożyć kartę SD." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "zapamiętana dysza: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Średnica dyszy w przetworzonym pliku nie jest zgodna z średnicą dyszy w " +#~ "ustawieniach. Jeśli ostatnio zmieniłeś dyszę, przejdź do opcji Urządzenie " +#~ "> Typ dyszy, aby zmienić to ustawienie." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Drukowanie materiału o wysokiej temperaturze (%s materiał) z %s może " +#~ "spowodować uszkodzenie dyszy." + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "Łączenie z drukarką. Nie można anulować w trakcie procesu łączenia." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Ostrożnie! Kalibracja przepływu na Texture PEI może nie powieść się z " +#~ "powodu nierównomiernie rozłożonej powierzchni." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Automatyczna kalibracja przepływu za pomocą mikrolidaru" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Wysłać na kartę SD drukarki" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Przed wysłaniem na kartę SD drukarki, należy włożyć kartę SD." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Drukarka nie obsługuje wysyłania na kartę SD." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Liczba kolorów powinna mieścić się w zakresie [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Aktualne kolory filamentów:" + +#~ msgid "Quick set:" +#~ msgstr "Szybkie ustawienie:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Dodaj ekstruder do użycia po już istniejących ekstruderach" + +#~ msgid "Cluster colors" +#~ msgstr "Klasteryzacja kolorów" + +#~ msgid "Map Filament" +#~ msgstr "Przypisz filament" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Uwaga: Kolor został wybrany. Możesz kliknąć OK \n" +#~ "aby kontynuować, lub dostosować go ręcznie." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Ostrzeżenie: Suma nowo dodanych i \n" +#~ "obecnych ekstruderów przekracza 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Auto-obliczenia" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca będzie przeliczał objętość płukania za każdym razem, gdy zmieni się " +#~ "kolor filamentu. Możesz wyłączyć auto-przeliczanie w Snapmaker Orca > " +#~ "Preferencje" + +#~ msgid "unloaded" +#~ msgstr "rozładowywanie" + +#~ msgid "loaded" +#~ msgstr "załadowany" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Od" + +#~ msgid "To" +#~ msgstr "Do" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Wznów drukowanie (wady są do zaakceptowania)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Wznów drukowanie (problem został rozwiązany)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Krok 1. Proszę upewnić się, że Snapmaker Orca i drukarka są w tej samej " +#~ "sieci LAN." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Krok 2. Jeśli adres IP i kod dostępu są różne od aktualnych wartości na " +#~ "drukarce, proszę je poprawić." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Krok 3. Proszę uzyskać numer seryjny urządzenia po stronie drukarki. " +#~ "Zazwyczaj można go odnaleźć wśród informacji o urządzeniu, na ekranie " +#~ "drukarki." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " jest zbyt blisko innych modeli, mogą wystąpić kolizje podczas drukowania." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Nie można drukować jednocześnie wieloma filamentami o znacznych różnicach " +#~ "temperatur. Może to spowodować zablokowanie lub uszkodzenie extrudera i " +#~ "dyszy" + +#~ msgid "Ironing angle" +#~ msgstr "Kąt prasowania" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Kąt, pod jakim wykonywane jest prasowanie. Liczba ujemna wyłącza tę " +#~ "funkcję i używa domyślnej metody." + +#~ msgid "Remove small overhangs" +#~ msgstr "Usuń małe nawisy" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Usuń małe nawisy, które prawdopodobnie nie wymagają podpór." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Tylko jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno " +#~ "chcesz zastąpić inne wyniki?" + +#~ msgid "External Spool" +#~ msgstr "Zewnętrzna szpula" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Proszę wprowadzić poprawne wartości:\n" +#~ "Początkowa temp.: <= 350\n" +#~ "Końcowa temp.: >= 170\n" +#~ "Początkowa temp. > Końcowa temp. + 5)" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "" +#~ "Brakuje niestandardowej drukarki lub modelu, proszę wprowadzić dane." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "dysza w profilu: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Średnica dyszy w profilu nie jest zgodna z zapamiętaną średnicą dyszy. " +#~ "Czy ostatnio zmieniono dyszę?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "" +#~ "*Drukowanie filamentu %s z użyciem %s może spowodować uszkodzenie dyszy" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Zwiększenie precyzji powłoki poprzez regulację odległości między " +#~ "zewnętrznymi ścianami. Pozwala to również poprawić jednolitość warstw." + +#~ msgid "Enable filament ramming." +#~ msgstr "Włącz szybką ekstruzję filamentu" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + kółko myszy" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + kółko myszy" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + Lewy przycisk myszy" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Przesuń myszką w górę lub w dół" + +#~ msgid "Left mouse button:" +#~ msgstr "Lewy przycisk myszy:" + +#~ msgid "Right mouse button:" +#~ msgstr "Prawy przycisk myszy:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + Lewy przycisk myszy:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + Prawy przycisk myszy:" + +#~ msgid "Recent projects" +#~ msgstr "Ostatnie projekty" + +#~ msgid "Maximum recent projects" +#~ msgstr "Maksymalna liczba ostatnich projektów" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Określa maksymalną liczbę ostatnich projektów" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Dowolna strzałka" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Lewy przycisk myszy" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Lewy przycisk myszy" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Dowolna strzałka" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Lewy przycisk myszy" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Lewy przycisk myszy" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Lewy przycisk myszy" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+Dowolna strzałka" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+kółko myszy" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+kółko myszy" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+kółko myszy" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+kółko myszy" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+kółko myszy" + +#~ msgid "Set Position" +#~ msgstr "Ustaw pozycję" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Kliknij prawym przyciskiem myszy ikonę, aby naprawić obiekt modelu" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "" +#~ "Obiekt docelowy zawiera tylko jedną część i nie może zostać podzielony." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Legenda" + +#~ msgid "Percent" +#~ msgstr "Procent" + +#~ msgid "Used filament" +#~ msgstr "Użyty filament" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Więcej..." + +#~ msgid "More calibrations" +#~ msgstr "Więcej kalibracji" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Karta SD" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Brak karty SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Niezwykła karta SD" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Nie można wypiąć urządzenia %s(%s)." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Tę opcję można zmienić później w preferencjach \"Zachowanie przy " +#~ "wczytywaniu\"" + +#~ msgid "Invalid number" +#~ msgstr "Nieprawidłowa liczba" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "zapamiętana dysza: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Temperatura stołu, gdy zainstalowana jest cool plate. Wartość 0 oznacza, " +#~ "że filament nie jest przystosowany do druku na Cool Plate SuperTack" + +#~ msgid "Ramming settings" +#~ msgstr "Ustawienia wyciskania" + +#~ msgid "Profile dependencies" +#~ msgstr "Zależności profilowe" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "pakiet konfiguracyjny jest niekompatybilny z obecną aplikacją." + +#~ msgid "Total ramming time" +#~ msgstr "Całkowity czas wyciskania" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Całkowita objętość wyciskania" + +#~ msgid "Ramming line width" +#~ msgstr "Szerokość linii wyciskania" + +#~ msgid "Ramming line spacing" +#~ msgstr "Odstęp linii wyciskania" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "wznów" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Tryb klasyczny" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Włącz tę opcję, aby używać trybu klasycznego" + +#~ msgid "Compatible machine" +#~ msgstr "Kompatybilna maszyna" + +#~ msgid "Compatible machine condition" +#~ msgstr "Warunek kompatybilnej maszyny" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Warunek kompatybilnych profili procesów" + +#~ msgid "Default filament color" +#~ msgstr "Domyślny kolor filamentu" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Zmień kierunek pełnego wypełnienia" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Zmień kierunek pełnego wypełnienia o 90° dla każdej warstwy." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Model kompensacji przepływu, używany do dostosowywania przepływu dla " +#~ "małych obszarów wypełnienia. Model jest wyrażony jako para wartości " +#~ "oddzielonych przecinkiem dla długości wytłoczenia i czynników korekty " +#~ "przepływu, jeden zestaw na linię, w następującym formacie: „1.234,5.678”" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Największa wysokość warstwy drukowalnej dla extrudera. Używane do " +#~ "ograniczenia maksymalnej wysokości warstwy podczas włączonej adaptacyjnej " +#~ "wysokości warstwy" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Najniższa możliwa do wydrukowania wysokość warstwy dla extrudera. " +#~ "Stosowana jako dolna granica dla adaptacyjnej wysokości warstw" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Retrakcja na górnej warstwie" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Włącz wymuszanie retrakcji na górnej warstwie. Wyłączenie tej opcji może " +#~ "prowadzić do gromadzenia się materiału i zatkania dyszy, zwłaszcza przy " +#~ "drukowaniu skomplikowanych i wolnych wzorów, takich jak krzywa Hilberta." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Pewna ilość materiału w ekstruderze jest cofana, aby zapobiec wyciekowi " +#~ "filamentu podczas długiego ruchu. Ustaw zero, aby zablokować retrakcje" + +#~ msgid "Speed of retractions." +#~ msgstr "Prędkość cofnięcia filamentu" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Prędkość ponownego załadowania filamentu do extrudera. Zero oznacza tę " +#~ "samą prędkość co retrakcja." + +#~ msgid "Single loop draft shield" +#~ msgstr "Pojedyncza pętla Draft shield" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "Ogranicza liczbę pętli Draft Shield do jednej ściany po pierwszej " +#~ "warstwie. Może to być przydatne w celu oszczędności filamentu, ale może " +#~ "również spowodować odkształcenie lub jej pęknięcie." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "" +#~ "Odstęp między liniami powierzchni warstwy łączącej. Wartość zero oznacza, " +#~ "że warstwa łącząca jest jednolita i bez przerw" + +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Minimalna grubość cienkich detali. Detale modelu, które są cieńsze niż ta " +#~ "wartość, nie będą drukowane, natomiast detale grubsze niż minimalny " +#~ "rozmiar detalu zostaną poszerzone do minimalnej szerokości ściany. Jest " +#~ "to wyrażone jako procent średnicy dyszy." + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "załaduj aktualne ustawienia procesu/maszyny podczas korzystania z " +#~ "aktualizacji" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "" +#~ "Wczytaj najnowsze ustawienia filamentu podczas korzystania z aktualnej " +#~ "wersji." + +#~ msgid "Downward machines settings" +#~ msgstr "ustawienia wstecznej kompatybilności maszyn" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Wczytaj identyfikatory filamentu dla każdego obiektu" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Teraz dodaliśmy automatyczną kalibrację dla różnych filamentów, która " +#~ "jest w pełni zautomatyzowana, a wynik zostanie zapisany w drukarce do " +#~ "przyszłego użycia. Musisz przeprowadzić kalibrację tylko w następujących " +#~ "ograniczonych przypadkach:\n" +#~ "1. Jeśli wprowadzasz nowy filament innej marki/modelu lub filament jest " +#~ "wilgotny;\n" +#~ "2. Jeśli dysza jest zużyta lub została wymieniona na nową;\n" +#~ "3. Jeśli maksymalna prędkość przepływu lub temperatura druku zostaną " +#~ "zmienione w ustawieniach filamentu." + +#~ msgid "step: " +#~ msgstr "Krok: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Wczytaj STL" + +#~ msgid "Load svg" +#~ msgstr "Wczytaj svg" + +#~ msgid "Back Page 1" +#~ msgstr "Poprzednia strona 1" + +#~ msgid "Delete Filament" +#~ msgstr "Usuń filament" + +#~ msgid "Refresh Printers" +#~ msgstr "Odśwież drukarki" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "W porównaniu z domyślnym profilem dyszy o średnicy 0.2 mm, ma mniejszą " +#~ "wysokość warstwy, co prowadzi do praktycznie niewidocznych linii warstw i " +#~ "wyższej jakości druku, ale wydłuża czas druku." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "W porównaniu ze standardowym profilem dyszy o średnicy 0.2 mm, ten profil " +#~ "ma mniejszą wysokość warstwy, co prowadzi do praktycznie niewidocznych " +#~ "linii warstw i znacznie wyższa jakość wydruku, ale jednocześnie wydłuża " +#~ "jego czas." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Ta bardzo duża wysokość warstwy skutkuje wyraźnie widocznymi liniami " +#~ "warstw, niską jakością druku, a także standardowym czasem druku." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "W porównaniu z domyślnym profilem dla dyszy o średnicy 0.8 mm, ten profil " +#~ "ma nieco większą wysokość warstwy. W rezultacie są to wyraźnie widoczne " +#~ "warstwy i znacznie niższa jakość druku, ale w niektórych przypadkach " +#~ "skraca to czas wydruku." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "W porównaniu z domyślnym profilem dla dyszy o średnicy 0,8 mm, ten profil " +#~ "ma znacznie większą wysokość warstwy. W rezultacie warstwy są bardzej " +#~ "widoczne, a jakość druku znacznie niższa, ale w niektórych przypadkach " +#~ "znacznie skraca się czas wydruku." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "W porównaniu z domyślnym profilem dla dyszy o średnicy 0,8 mm, ten profil " +#~ "ma mniejszą wysokość warstwy, co prowadzi do mniejszych, ale nadal " +#~ "widocznych warstw i lepszej jakości druku, a w niektórych przypadkach " +#~ "może się wydłużyć czas wydruku." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Połączenie z Flashforge działa poprawnie." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Nie można połączyć się z Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Ustaw rodzaj brimu na „malowane“" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Dodaliśmy eksperymentalny styl \"Cienkie Drzewo\", który charakteryzuje " +#~ "się mniejszą objętością podpór, ale i słabszą wytrzymałością.\n" +#~ "Zalecamy używanie go z: 0 warstw łączących, 0 odległością od góry, 2 " +#~ "ścianami." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Dla stylów \"Drzewo Grube\" i \"Drzewo Hybrydowe\" zalecamy następujące " +#~ "ustawienia: co najmniej 2 warstwy łączące, co najmniej 0,1 mm odległości " +#~ "od góry lub używanie materiałów podporowych na łączeniach." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Średnica gałęzi z podwójnymi ścianami" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Gałęzie o powierzchni większej niż powierzchnia koła o tej średnicy będą " +#~ "drukowane z podwójnymi ścianami dla stabilności. Ustaw tę wartość na " +#~ "zero, aby nie było podwójnych ścian." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "To ustawienie określa liczbę ścian wokół podpory" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Podpory: generuj ścieżkę narzędzia na warstwie %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Podpory: wykryj nawisy" + +#~ msgid "Support: propagate branches" +#~ msgstr "Podpory: rozprzestrzeniaj gałęzie" + +#~ msgid "Support: draw polygons" +#~ msgstr "Podpory: rysuj poligony" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Podpory: generuj ścieżkę narzędzia" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Podpory: generuj poligony na warstwie %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Podpory: napraw dziury na warstwie %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Podpory: rozprzestrzeniaj gałęzie na warstwie %d" + +#~ msgid "Current Cabin humidity" +#~ msgstr "Aktualna wilgotność w komorze" + +#~ msgid "Stopped." +#~ msgstr "Zatrzymano." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Błąd połączenia [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Inicjalizacja nie powiodła się (Brak połączenia z urządzeniem)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Inicjalizacja nie powiodła się (brak dostępu do pamięci, włóż kartę SD)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Inicjalizacja nie powiodła się (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Nieudane połączenie LAN (wysyłanie pliku do druku)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Krok 1, proszę potwierdzić, że Snapmaker Orca i drukarka są w tej samej " +#~ "sieci LAN." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Krok 2, jeśli IP i kod dostępu poniżej różnią się od rzeczywistych " +#~ "wartości na drukarce, proszę je poprawić." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Krok 3: Sprawdź adres IP za pomocą polecenia ping, aby sprawdzić utratę " +#~ "pakietów i opóźnienia." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Wymuszone chłodzenie dla nawisów i mostów" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Włącz tę opcję, aby zoptymalizować prędkość wentylatora chłodzącego " +#~ "części dla nawisów i mostów, aby uzyskać lepsze chłodzenie" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Prędkość wentylatora dla nawisów" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Wymuś pracę wentylatora chłodzącego części na tej prędkości podczas " +#~ "drukowania mostu lub ściany nawisającej, która ma duży stopień nawisu. " +#~ "Wymuszanie chłodzenia dla nawisów i mostów może poprawić jakość tych " +#~ "części modelu" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Próg chłodzenia dla nawisów" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Wymuś pracę wentylatora chłodzącego na określoną prędkość, gdy stopień " +#~ "nawisu drukowanej części przekracza tę wartość. Wyrażone w procentach, co " +#~ "wskazuje, jak duża jest szerokość linii bez podpór z niższej warstwy. 0%% " +#~ "oznacza wymuszanie chłodzenia dla całej zewnętrznej ściany, bez względu " +#~ "na stopień nawisu" + +#~ msgid "Bridge infill direction" +#~ msgstr "Kierunek wypełnienia mostu" + +#~ msgid "Bridge density" +#~ msgstr "Gęstość mostu" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Gęstość zewnętrznych mostów. 100% oznacza pełne wypełnienie mostu. " +#~ "Domyślnie jest 100%." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Popraw precyzję powłoki poprzez dostosowanie odstępów zewnętrznych ścian. " +#~ "To również poprawia spójność warstw.\n" +#~ "Uwaga: To ustawienie będzie miało wpływ tylko wtedy, gdy sekwencja ściany " +#~ "jest skonfigurowana jako Wewnętrzna-Zewnętrzna." + +#~ msgid "Thick bridges" +#~ msgstr "Grube mosty" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "Filtruj małe mosty wewnętrzne (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Ta opcja może pomóc w redukcji efektu 'pillowingu' na górnych " +#~ "powierzchniach w mocno nachylonych lub zakrzywionych modelach.\n" +#~ "\n" +#~ "Domyślnie, małe wewnętrzne mosty są filtrowane, a wewnętrzne pełne " +#~ "wypełnienie jest drukowane bezpośrednio na rzadkim wypełnieniu. To " +#~ "rozwiązanie sprawdza się w większości przypadków, przyspieszając " +#~ "drukowanie bez zbytniego kompromisu w jakości górnej powierzchni.\n" +#~ "\n" +#~ "Jednak w mocno nachylonych lub zakrzywionych modelach, szczególnie przy " +#~ "zbyt niskiej gęstości rzadkiego wypełnienia, może to prowadzić do " +#~ "odkształcania się niepodpartej części wypełnienia, powodując " +#~ "'pillowing'.\n" +#~ "\n" +#~ "Wyłączenie tej opcji spowoduje wydrukowanie warstwy mostu wewnętrznego " +#~ "nad niepodpartym wewnętrznym pełnym wypełnieniem. Opcje poniżej " +#~ "kontrolują stopień filtrowania, czyli ilość stworzonych wewnętrznych " +#~ "mostów.\n" +#~ "\n" +#~ "Filtruj – włącz tę opcję. Jest to domyślne zachowanie, które dobrze " +#~ "sprawdza się w większości przypadków.\n" +#~ "\n" +#~ "Ograniczone filtrowanie - tworzy wewnętrzne mosty na mocno pochylonych " +#~ "powierzchniach, jednocześnie unikając tworzenia niepotrzebnych " +#~ "wewnętrznych mostów. Działa to dobrze w przypadku większości trudnych " +#~ "modeli.\n" +#~ "\n" +#~ "Brak filtrowania – tworzy wewnętrzne mosty na każdym potencjalnym " +#~ "wewnętrznym nawisie. Ta opcja jest przydatna dla modeli z mocno nachyloną " +#~ "górną powierzchnią. Jednak w większości przypadków niepotrzebnie tworzy " +#~ "ich zbyt wiele." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Ta prędkość wentylatora jest narzucana podczas drukowania wszystkich " +#~ "warstw łączących podpory,\n" +#~ "aby osłabić ich wiązanie przy wyższej prędkości wentylatora. Ustaw na -1, " +#~ "aby wyłączyć to narzucenie.\n" +#~ "Można to nadpisać tylko za pomocą opcji disable_fan_first_layers." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "Minimalna prędkość druku, do której drukarka zwolni, aby zachować " +#~ "minimalny czas warstwy powyżej, gdy włączona jest opcja zwalniania dla " +#~ "lepszego schładzania warstwy." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Shift + Lewy przycisk myszy" + +#~ msgid "Unselect" +#~ msgstr "Odznacz" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Skala" + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Wymuszenie podniesienia osi Z" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-hop podczas retrakcji" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "Liczba milimetrów, które musi wynosić nawis, aby odwrócenie było uważane " +#~ "za użyteczne. Może być procentem szerokości obwodu.\n" +#~ "Wartość 0 aktywuje odwrócenie na każdej parzystej warstwie." + +#~ msgid "Reverse on odd" +#~ msgstr "Przeciwny kierunek na nieparzystych warstwach" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Ekstruzja obrysów mających część z nawisem. Będą one drukowane, w " +#~ "przeciwnym kierunku na nieparzystych warstwach. Ten naprzemienny wzór " +#~ "może znacznie poprawić strome nawisy.\n" +#~ "\n" +#~ "Ustawienie to może również pomóc zmniejszyć deformację części dzięki " +#~ "zmniejszeniu naprężeń w ścianach części." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Zastosuj logikę przeciwnych obrysów tylko na wewnętrznych obrysach.\n" +#~ "\n" +#~ "To ustawienie znacznie zmniejsza naprężenia części, ponieważ są one teraz " +#~ "rozdzielone w przemiennych kierunkach. Powinno to zmniejszyć deformację " +#~ "części, jednocześnie zachowując jakość zewnętrznych ścian. Funkcja ta " +#~ "może być bardzo przydatna dla filamentów podatnych na deformację, takich " +#~ "jak ABS/ASA, a także dla elastycznych filamentów, takich jak TPU i Silk " +#~ "PLA. Może to również pomóc zmniejszyć deformację w unoszących się " +#~ "regionach nad podporami.\n" +#~ "\n" +#~ "Aby to ustawienie było najbardziej skuteczne, zaleca się ustawienie Progu " +#~ "Odwrócenia na 0, aby wszystkie wewnętrzne ściany drukowały się w " +#~ "przemiennych kierunkach na nieparzystych warstwach, niezależnie od " +#~ "stopnia nawisu." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Ilość mm, jaką musi mieć nawis, aby odwrócenie było uznane za użyteczne. " +#~ "Może być to % szerokości obryski.\n" +#~ "Wartość 0 umożliwia odwrócenie na każdej nieparzystej warstwie, " +#~ "niezależnie od wszystkiego." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "Kierunek, w którym są drukowane obwody ściany, patrząc z góry.\n" +#~ "\n" +#~ "Domyślnie wszystkie ściany są drukowane w kierunku przeciwnym do ruchu " +#~ "wskazówek zegara, chyba że włączona jest opcja Odwróć dla nieparzystych " +#~ "warstw. Ustawienie tego na dowolną inną opcję niż Auto spowoduje, że " +#~ "kierunek ściany będzie ustalony niezależnie od ustawienia Odwróć dla " +#~ "nieparzystych.\n" +#~ "\n" +#~ "Ta opcja będzie wyłączona, jeśli aktywowany jest tryb Wazy.\n" +#~ "\n" +#~ "Opcie:\n" +#~ "Przeciwnie (przeciwnie do ruchu wskazówek zegara)\n" +#~ "Zgodnie (zgodnie z ruchem wskazówek zegara)" + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Podczas drukowania według obiektu extruder może zderzyć się z obrysem " +#~ "skirtu.\n" +#~ "Dlatego zresetuj wysokość skirtu na 1, aby tego uniknąć." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "Draft Shield (\"ochrona przed przeciągiem\")jest przydatna do ochrony " +#~ "wydruku z ABS lub ASA przed wypaczaniem i oderwaniem się od stołu " +#~ "drukarki z powodu podmuchów powietrza. Zazwyczaj jest to potrzebne tylko " +#~ "w przypadku drukarek otwartych, czyli bez obudowy.\n" +#~ "\n" +#~ "Opcje:\n" +#~ "Włączony = Skirt jest takiej samej wysokości, jak najwyższy wydrukowany " +#~ "obiekt.\n" +#~ "Ograniczony =Skirt jest takiej samej wysoki, jak został określony w " +#~ "wysokość Skirtu.\n" +#~ "\n" +#~ "Uwaga: Aktywując funkcję Draft Shield, Skirt zostanie wydrukowany w " +#~ "takiej odległości od obiektu jak określono w odstęp Skirtu od obiektu. " +#~ "Jeśli w tym samym czasie Brim jest też aktywny, może dojść do jego " +#~ "przecięcia się ze Skirt-em. Aby temu zapobiec, zwiększ wartość odległości " +#~ "Skirt - Obiekt\n" + +#~ msgid "Limited" +#~ msgstr "Ograniczony" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Zmodyfikuj tę wartość, aby uniknąć drukowania krótkich, otwartych " +#~ "ścianek, co może prowadzić do wydłużenia czasu druku. Wyższe wartości " +#~ "spowodują usunięcie większej ilości dłuższych ścianek.\n" +#~ "\n" +#~ "UWAGA: Ta wartość nie wpłynie na dolne i górne powierzchnie modelu i może " +#~ "zapobiec widocznym przerwom na zewnątrz. Aby dostosować czułość " +#~ "określającą, co jest uważane za górną powierzchnię, dostosuj 'Próg jednej " +#~ "ściany' w zaawansowanych ustawieniach poniżej. 'Próg jednej ściany' jest " +#~ "widoczny tylko wtedy, gdy to ustawienie jest ustawione na wartość wyższą " +#~ "niż domyślna wartość 0,5 lub jeśli opcja pojedynczych ścianek na górze " +#~ "jest włączona." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "Nie filtruj małych wewnętrznych mostów (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "To opcja może pomóc w redukcji efektu \"pillowing\" na górnych " +#~ "powierzchniach w mocno pochylonych lub zakrzywionych modelach.\n" +#~ "\n" +#~ "Domyślnie, małe wewnętrzne mosty są odfiltrowywane, a wewnętrzna " +#~ "struktura jest drukowana bezpośrednio na rzadkiej strukturze wypełnienia. " +#~ "To działa dobrze w większości przypadków, przyspieszając drukowanie bez " +#~ "zbyt dużego kompromisu w jakości górnej powierzchni.\n" +#~ "\n" +#~ "Jednakże w mocno pochylonych lub zakrzywionych modelach, zwłaszcza przy " +#~ "niskiej gęstości struktury wypełnienia, może to prowadzić do wywijania " +#~ "się niewspieranej struktury wypełnienia, co powoduje efekt \"pillowing" +#~ "\".\n" +#~ "\n" +#~ "Włączenie tej opcji spowoduje drukowanie wewnętrznej warstwy mostka nad " +#~ "nieco niewspieraną wewnętrzną strukturą wypełnienia. Poniższe opcje " +#~ "kontrolują stopień filtrowania, czyli ilość tworzonych wewnętrznych " +#~ "mostów.\n" +#~ "\n" +#~ "Wyłączone - Wyłącza tę opcję. Jest to zachowanie domyślne i działa dobrze " +#~ "w większości przypadków.\n" +#~ "\n" +#~ "Ograniczone filtrowanie - Tworzy wewnętrzne mosty na mocno pochylonych " +#~ "powierzchniach, unikając tworzenia niepotrzebnych wewnętrznych mostów. To " +#~ "działa dobrze dla większości trudnych modeli.\n" +#~ "\n" +#~ "Brak filtrowania - Tworzy wewnętrzne mosty na każdym potencjalnym " +#~ "wewnętrznym występie. Ta opcja jest przydatna dla mocno pochylonych " +#~ "modeli górnych powierzchni. Jednakże w większości przypadków tworzy zbyt " +#~ "wiele niepotrzebnych mostów." + +#~ msgid "Shrinkage" +#~ msgstr "Skurcz" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "Twój obiekt wydaje się być zbyt duży. Zostanie on automatycznie " +#~ "zmniejszony, aby pasował do powierzchni roboczej." + +#~ msgid "Shift+G" +#~ msgstr "Shift+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Umożliwia wypełnienie szpar/szczelin dla wybranych powierzchni. Minimalną " +#~ "długość szczeliny, która zostanie wypełniona, można kontrolować poprzez " +#~ "opcję 'filtruj wąskie szczeliny' znajdującej się poniżej.\n" +#~ "\n" +#~ "Opcje:\n" +#~ "1. Wszędzie: Stosuje wypełnienie na górnych, dolnych i wewnętrznych " +#~ "powierzchniach stałych\n" +#~ "2. Powierzchnie górne i dolne: Stosuje wypełnienie tylko na górnych i " +#~ "dolnych powierzchniach\n" +#~ "3. Nigdzie: Wyłącza wypełnienie\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Zmniejsz tę wartość minimalnie (na przykład do 0.9), aby zmniejszyć ilość " +#~ "filamentu dla mostu, co zmniejszy jego wygięcie" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Ta wartość określa grubość wewnętrznej warstwy mostu. Jest to pierwsza " +#~ "warstwa nad rzadkim wypełnieniem. Aby poprawić jakość powierzchni nad tym " +#~ "wypełnieniem, możesz zmniejszyć trochę tą wartość (na przykład do 0.9)" + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Czynnik ten wpływa na ilość filamentu na górne pełne wypełnienie. Możesz " +#~ "go nieco zmniejszyć, aby uzyskać gładkie wykończenie powierzchni" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Ten współczynnik wpływa na ilość materiału w dolnej warstwie pełnego " +#~ "wypełnienia" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Włącz tę opcję, aby zwolnić drukowanie w obszarach, gdzie istnieje " +#~ "potencjalne zagrożenie odkształceniem obwodów" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Prędkość mostu i całkowicie nawisającej ściany" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Prędkość wewnętrznego mostu. Jeśli wartość jest wyrażona w procentach, " +#~ "będzie obliczana na podstawie prędkości mostu. Domyślna wartość to 150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Czas ładowania nowego filamentu podczas zmiany filamentu. Tylko do celów " +#~ "statystycznych" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Czas rozładunku poprzedniego filamentu podczas zmiany filamentu. Tylko do " +#~ "celów statystycznych" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Czas, który drukarka (lub dodatek Multi Material 2.0) poświęca na " +#~ "ładowanie nowego filamentu podczas zmiany narzędzia (przy wykonywaniu " +#~ "kodu T). Ten czas jest dodawany do szacowanego czasu druku." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Czas, który drukarka (lub dodatek Multi Material 2.0) poświęca na " +#~ "rozładowanie nowego filamentu podczas zmiany narzędzia (przy wykonywaniu " +#~ "kodu T). Ten czas jest dodawany do szacowanego czasu druku." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtruj szczeliny mniejsze niż podany próg" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Włącz tę opcję dla kontroli temperatury komory. Komenda M191 zostanie " +#~ "dodana przed \"początkowy G-code drukarki\"\n" +#~ "Komendy G-code: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Wyższa temperatura komory może pomóc w redukcji wypaczania i potencjalnie " +#~ "prowadzić do większej siły wiązania międzywarstwowego w przypadku " +#~ "materiałów wysokotemperaturowych, takich jak ABS, ASA, PC, PA itp. Dla " +#~ "filametów PLA, PETG, TPU, PVA i innych materiałów niskotemperaturowych " +#~ "temperatura komory nie powinna być wysoka. Aby uniknąć zatykania sie " +#~ "dyszy zaleca się ustawienia na wartość 0 (wyłączone)." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Głębokość zazębiania się podzielonego na segmenty regionu. Wartość zero " +#~ "wyłącza tę funkcję." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Ekstruder dla wieży czyszczącej" #~ msgid "Current association: " #~ msgstr "Aktualnie powiązano: " @@ -17024,83 +22607,6 @@ msgstr "" #~ "Rozmiar pliku przekracza limit przesyłania 100 MB. Proszę przesłać plik " #~ "za pomocą panelu." -#~ msgid "Enable adaptive pressure advance (beta)" -#~ msgstr "Włącz adaptacyjny wzrost ciśnienia (beta)" - -#~ msgid "" -#~ "With increasing print speeds, it has been observed that the effective PA " -#~ "value typically decreases. This means that a single PA value is not 100% " -#~ "optimal for all features and a compromise value is usually used, that " -#~ "does not cause too much bulging on slower features while also not causing " -#~ "gaps on faster features.\n" -#~ "\n" -#~ "This feature aims to address this limitation by modeling the response of " -#~ "your printer's extrusion system depending on the speed it is printing at. " -#~ "Internally it generates a fitted model that can extrapolate the needed " -#~ "pressure advance for any given print speed, which is then emmited to the " -#~ "printer depending on the current print speed.\n" -#~ "\n" -#~ "When enabled the pressure advance value above is overriden. However, a " -#~ "reasonable default value above isstrongly recomended to act as a fallback " -#~ "in case the model calculations fail." -#~ msgstr "" -#~ "Wraz ze wzrostem prędkości druku zaobserwowano, że efektywna wartość PA " -#~ "zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w 100% " -#~ "optymalna dla wszystkich elementów i zwykle stosowana jest wartość " -#~ "kompromisowa, która nie powoduje zbyt dużego \"wypuklenia\" na elementach " -#~ "drukowanych wolniej, a jednocześnie nie powoduje przerw na elementach " -#~ "drukowanych szybciej.\n" -#~ "\n" -#~ "Ta funkcja ma na celu rozwiązanie tego ograniczenia poprzez modelowanie " -#~ "reakcji ekstrudera w zależności od prędkości drukowania. Wewnętrznie " -#~ "generuje dopasowany model, który może przewidzieć jakie będzie wymagane " -#~ "ciśnienie dla dowolnej prędkości drukowania, który jest następnie " -#~ "przekazywany do drukarki w zależności od bieżącej prędkości druku.\n" -#~ "\n" -#~ "Po włączeniu powyższa wartość PA jest nadpisywana. Zdecydowanie zaleca " -#~ "się jednak przyjęcie rozsądnej wartości domyślnej, która będzie działać " -#~ "jako rozwiązanie awaryjne w przypadku nieprawidłowych obliczeń dla modelu." - -#~ msgid "Adaptive pressure advance measurements (beta)" -#~ msgstr "Adaptacyjny pomiar ciśnienia (beta)" - -#~ msgid "" -#~ "Add pairs of pressure advance values and the speed they were measured at, " -#~ "separated by a coma. One set of values per line. For example\n" -#~ "0.03,100\n" -#~ "0.027,150 etc.\n" -#~ "\n" -#~ "How to calibrate:\n" -#~ "1. Run the pressure advance test for at least 3 speeds per filament. It " -#~ "is recommended that the test is runfor at least the speed of the external " -#~ "perimeters, the speed of the internal perimeters and the fastest feature " -#~ "print speed in your profile (usually its the sparse or solid infill\n" -#~ "2. Take note of the optimal Pressure advance value for each speed. The PA " -#~ "ideal PA value should be decreasing the faster the speed is. If it is " -#~ "not, confirm that your extruder is functioning correctly3. Enter the " -#~ "pairs of PA values and Speeds in the text box here and save your filament " -#~ "profile" -#~ msgstr "" -#~ "Dodaj pary wartości przyspieszenia ciśnienia i prędkości, przy których " -#~ "zostały zmierzone, oddzielone przecinkiem. Jeden zestaw wartości na " -#~ "wiersz. Na przykład\n" -#~ "0.03,100\n" -#~ "0.027,150 itd.\n" -#~ "\n" -#~ "Jak skalibrować:\n" -#~ "1. Przeprowadź test PA dla co najmniej 3 prędkości na filament. Zaleca " -#~ "się przeprowadzenie testu PA co najmniej dla zewnętrznych obwodów, " -#~ "wewnętrznych obwodów i najszybszej prędkości drukowania cechy w profilu " -#~ "(zwykle jest to rzadkie lub pełne wypełnienie).\n" -#~ "2. Zanotuj optymalną wartość PA dla każdej prędkości. Idealna wartość PA " -#~ "powinna maleć wraz ze wzrostem prędkości. Jeśli tak nie jest, sprawdź, " -#~ "czy ekstruder działa prawidłowo. \n" -#~ "3.Wprowadź pary wartości PA i prędkości w polu tekstowym i zapisz profil " -#~ "filamentu." - -#~ msgid "Flow ratio and Pressure Advance" -#~ msgstr "Współczynnik przepływu i Wzrost ciśnienia (PA)" - #~ msgid "param_information" #~ msgstr "param_information" @@ -17118,12 +22624,6 @@ msgstr "" #~ "jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno chcesz " #~ "zastąpić ten wynik?" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " #~ "PrusaSlicer links from Printable.com" @@ -17136,7 +22636,7 @@ msgstr "" #~ "first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " #~ "push out the printed walls where it is attached to them, resulting in a " #~ "worse external surface finish. It can also cause the infill to shine " #~ "through the external surfaces of the part." @@ -17152,9 +22652,6 @@ msgstr "" #~ "zewnętrznej powierzchni. Może to również spowodować prześwitywanie " #~ "wypełnienia przez zewnętrzne powierzchnie części." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "Maximum print speed when purging" #~ msgstr "Maksymalna prędkość druku podczas czyszczenia" @@ -17164,7 +22661,7 @@ msgstr "" #~ "is lower, the lowest speed will be used instead.\n" #~ "Increasing this speed may affect the tower's stability, as purging can be " #~ "performed over sparse layers. Before increasing this parameter beyond the " -#~ "default of 90mm/sec, make sure your printer can reliably bridge at the " +#~ "default of 90 mm/s, make sure your printer can reliably bridge at the " #~ "increased speeds." #~ msgstr "" #~ "Maksymalna prędkość drukowania podczas oczyszczania w wieży czyszczącej. " @@ -17178,7 +22675,7 @@ msgstr "" #~ msgid "" #~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " #~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca opiera się na BambuStudio od Bambulab, które wywodzi się z " @@ -17282,24 +22779,9 @@ msgstr "" #~ msgid "MainBoard" #~ msgstr "MainBoard (Płyta główna)" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - #~ msgid "HMS" #~ msgstr "Stan drukarki (HMS)" -#~ msgid "- ℃" -#~ msgstr "- ℃" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "active" #~ msgstr "aktywny" @@ -17339,7 +22821,7 @@ msgstr "" #~ "odzwierciedlać stan komory." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Uwaga: jeśli podczas drukowania włożony zostanie nowy filament, AMS nie " @@ -17356,8 +22838,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Inicjalizacja nie powiodła się (Brak urządzenia kamery)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Drukarka jest zajęta pobieraniem. Proszę czekać, aż pobieranie zostanie " #~ "zakończone." @@ -17389,12 +22870,9 @@ msgstr "" #~ msgid "Load failed [%d]" #~ msgstr "Błąd wczytywania [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "Nie udało się pobrać informacji o modelach z drukarki." -#~ msgid "Failed to parse model infomations." -#~ msgstr "Nie udało się sparsować informacji o modelach." - #~ msgid "Connection lost. Please retry." #~ msgstr "Utracono połączenie. Proszę spróbować ponownie." @@ -17403,20 +22881,20 @@ msgstr "" #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Zmieniłeś niektóre ustawienia profilu \"%1%\". \n" +#~ "Zmieniłeś niektóre ustawienia profilu \"%1%\".\n" #~ "Czy chciałbyś zachować te zmienione ustawienia (nowa wartość) po zmianie " #~ "profilu?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" -#~ "Zmieniłeś niektóre ustawienia profilu. \n" +#~ "Zmieniłeś niektóre ustawienia profilu.\n" #~ "Czy chciałbyś zachować te zmienione ustawienia (nowa wartość) po zmianie " #~ "profilu?" @@ -17536,7 +23014,7 @@ msgstr "" #~ "For heavily sloped surfaces this option is not suitable as it will " #~ "generate too thin of a top layer and should be disabled." #~ msgstr "" -#~ "Dodatkowo redukuje ilość stałego wypełnienia aplikowanego na ściany. \n" +#~ "Dodatkowo redukuje ilość stałego wypełnienia aplikowanego na ściany.\n" #~ "\n" #~ "Ponieważ ilość wypełnienia podpory powierzchni stałych będzie bardzo " #~ "ograniczona, upewnij się, że używasz odpowiedniej liczby ścian do " @@ -17555,13 +23033,6 @@ msgstr "" #~ "Ta wartość może być określona w milimetrach lub jako procent bieżącej " #~ "wysokości warstwy. Domyślna wartość tego parametru to 0,05 mm." -#~ msgid "" -#~ "Speed of exhuast fan during printing.This speed will overwrite the speed " -#~ "in filament custom gcode" -#~ msgstr "" -#~ "Prędkość wentylatora wyciągowego podczas druku. Ta prędkość zastąpi " -#~ "prędkość w niestandardowym gcode filamentu" - #~ msgid "Speed of exhuast fan after printing completes" #~ msgstr "Prędkość wentylatora wyciągowego po zakończeniu druku" @@ -17601,9 +23072,6 @@ msgstr "" #~ msgid "Auxiliaryies" #~ msgstr "Akcesoria" -#~ msgid "nozzle" -#~ msgstr "Dysza" - #~ msgid "Alternate nozzles:" #~ msgstr "Inne rozmiary dysz:" @@ -17990,9 +23458,6 @@ msgstr "" #~ msgid "The maximum temperature cannot exceed" #~ msgstr "Maksymalna temperatura nie może przekroczyć" -#~ msgid "The minmum temperature should not be less than " -#~ msgstr "Minimalna temperatura nie powinna być mniejsza niż " - #~ msgid "Add Emboss text object" #~ msgstr "Dodaj wytłoczony obiekt tekstowy" @@ -18005,7 +23470,7 @@ msgstr "" #~ msgid "Font doesn't have any shape for given text." #~ msgstr "Czcionka nie ma żadnego kształtu dla danego tekstu." -#~ msgid "An unexpected error occured" +#~ msgid "An unexpected error occurred" #~ msgstr "Wystąpił nieoczekiwany błąd" #~ msgid "Best surface quality" @@ -18039,9 +23504,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "Wybierz archiwum SLA:" -#~ msgid "Import file" -#~ msgstr "Importuj plik" - #~ msgid "Import model and profile" #~ msgstr "Importuj model i profil" @@ -18085,10 +23547,10 @@ msgstr "" #~ msgstr "łączniki są poza obiektem" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Nieprawidłowy stan. \n" +#~ "Nieprawidłowy stan.\n" #~ "Żadna część nie została wybrana do zachowania po cięciu" #~ msgid "Entering Cut gizmo" @@ -18145,15 +23607,9 @@ msgstr "" #~ msgid "Model simplification has been canceled" #~ msgstr "Uproszczenie modelu zostało anulowane" -#~ msgid "Head diameter" -#~ msgstr "Średnica łącznika" - #~ msgid "Lock supports under new islands" #~ msgstr "Zablokuj podpory pod nowymi wyspami" -#~ msgid "Remove selected points" -#~ msgstr "Usuń zaznaczone punkty" - #~ msgid "Remove all points" #~ msgstr "Usuń wszystkie punkty" @@ -18169,9 +23625,6 @@ msgstr "" #~ msgid "Support points density" #~ msgstr "Gęstość punktów podpór" -#~ msgid "Auto-generate points" -#~ msgstr "Generuj punkty automatycznie" - #~ msgid "Manual editing" #~ msgstr "Edycja ręczna" @@ -18239,9 +23692,6 @@ msgstr "" #~ msgid "Snapmaker Orca error" #~ msgstr "błąd Snapmaker Orca" -#~ msgid "Continue" -#~ msgstr "Kontynuacja" - #~ msgid "Abort" #~ msgstr "Przerwij" @@ -18335,10 +23785,10 @@ msgstr "" #, boost-format #~ msgid "" -#~ "The selected 3mf file has been saved with a newer version of %1% and is " +#~ "The selected 3MF file has been saved with a newer version of %1% and is " #~ "not compatible." #~ msgstr "" -#~ "Wybrany plik 3mf został zapisany przy pomocy nowszej wersji %1% i nie " +#~ "Wybrany plik 3MF został zapisany przy pomocy nowszej wersji %1% i nie " #~ "jest kompatybilny" #~ msgid "" @@ -18380,9 +23830,6 @@ msgstr "" #~ "Wybrany plik 3MF zawiera model pomalowany do Multi Material przy pomocy " #~ "nowszej wersji Snapmaker Orca i nie jest kompatybilny." -#~ msgid " " -#~ msgstr " " - #~ msgid "" #~ "Number of mm the overhang need to be for the reversal to be considered " #~ "useful. Can be a (%) of the perimeter width.\n" @@ -18420,8 +23867,8 @@ msgstr "" #~ msgid "" #~ "Maximum defection of a point to the estimated radius of the circle.\n" #~ "As cylinders are often exported as triangles of varying size, points may " -#~ "not be on the circle circumference. This setting allows you some leway to " -#~ "broaden the detection.\n" +#~ "not be on the circle circumference. This setting allows you some leeway " +#~ "to broaden the detection.\n" #~ "In (mm or in %) of the radius." #~ msgstr "" #~ "Maksymalne odchylenie punktu od szacowanego promienia koła.\n" @@ -18491,7 +23938,7 @@ msgstr "" #~ msgstr "" #~ "Jeśli górna powierzchnia ma być drukowana i jest częściowo zakryta inną " #~ "warstwą, nie będzie traktowana jako górna warstwa, jeśli jej szerokość " -#~ "jest mniejsza niż ta wartość. \n" +#~ "jest mniejsza niż ta wartość.\n" #~ "Może to być przydatne, aby zapobiec uruchamianiu funkcji 'jeden perymetr " #~ "na górze' na powierzchni, która powinna być pokryta tylko perymetrami. Ta " #~ "wartość może być podawana w (mm lub jako %) szerokości ekstruzji " @@ -18503,13 +23950,6 @@ msgstr "" #~ msgid "Layer order" #~ msgstr "Kolejność warstw" -#~ msgid "" -#~ "Snapmaker Orca will terminate because of running out of memory. It may be a " -#~ "bug. It will be appreciated if you report the issue to our team." -#~ msgstr "" -#~ "Snapmaker Orca zakończy działanie z powodu braku pamięci. To może być błąd. " -#~ "Będziemy wdzięczni za zgłoszenie problemu naszemu zespołowi." - #~ msgid "" #~ "You can keep the modified presets in the new project, discard, or save " #~ "changes as new presets." @@ -18521,13 +23961,6 @@ msgstr "" #~ msgstr "" #~ "Nowy lub otwarty plik projektu nie jest dozwolony podczas procesu cięcia!" -#~ msgid "" -#~ "The version of Snapmaker Orca is too low and needs to be updated to the " -#~ "latest version before it can be used normally." -#~ msgstr "" -#~ "Wersja Snapmaker Orca jest zbyt niska i musi zostać zaktualizowana do " -#~ "najnowszej wersji, aby działać normalnie." - #~ msgid "" #~ "This action will break a cut correspondence.\n" #~ "After that model consistency can't be guaranteed.\n" @@ -18539,24 +23972,6 @@ msgstr "" #~ "Aby modyfikować bryły stałe lub obszary ujemne, najpierw trzeba " #~ "unieważnić informacje o cięciu." -#~ msgid "The target object contains only one part and can not be split." -#~ msgstr "" -#~ "Obiekt docelowy zawiera tylko jedną część i nie może zostać podzielony." - -#~ msgid "" -#~ "If first selected item is an object, the second one should also be an " -#~ "object." -#~ msgstr "" -#~ "Jeśli pierwszy zaznaczony element to obiekt, to drugi powinien również " -#~ "być obiektem." - -#~ msgid "" -#~ "If first selected item is a part, the second one should be a part in the " -#~ "same object." -#~ msgstr "" -#~ "Jeśli pierwszy zaznaczony element to część, to drugi powinien być częścią " -#~ "tego samego obiektu." - #~ msgid "" #~ "One cell can only be copied to one or multiple cells in the same column." #~ msgstr "" @@ -18600,15 +24015,6 @@ msgstr "" #~ "Ta płyta jest zablokowana,\n" #~ "Nie można zastosować automatycznej orientacji na tej płycie." -#~ msgid "" -#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " -#~ "Ranellucci and the RepRap community" -#~ msgstr "" -#~ "Snapmaker Orca opiera się na BambuStudio od Bambulab, które wywodzi się z " -#~ "PrusaSlicer od Prusa Research. PrusaSlicer z kolei bazuje na Slic3r od " -#~ "Alessandro Ranellucci i społeczności RepRap." - #~ msgid "" #~ "When the current material runs out, the printer will continue to print in " #~ "the following order." @@ -18619,15 +24025,6 @@ msgstr "" #~ msgid "The printer does not currently support auto-refill." #~ msgstr "Obecnie drukarka nie obsługuje automatycznego uzupełniania." -#~ msgid "" -#~ "The AMS will automatically read the information of inserted filament on " -#~ "start-up. It will take about 1 minute. The reading process will roll " -#~ "filament spools." -#~ msgstr "" -#~ "AMS automatycznie odczyta informacje o włożonym filamencie podczas " -#~ "uruchamiania. To zajmie około 1 minuty. Proces odczytu sprawi, że rolki " -#~ "filamentów się obrócą." - #~ msgid "" #~ "Failed to download the plug-in. Please check your firewall settings and " #~ "VPN software, check and retry." @@ -18645,15 +24042,6 @@ msgstr "" #~ "), aby zlokalizować pozycję głowicy narzędziowej. Zapobiega to " #~ "przesunięciu urządzenia poza obszar drukowalny i zużyciu sprzętu." -#~ msgid "" -#~ "The current chamber temperature or the target chamber temperature exceeds " -#~ "45℃. In order to avoid extruder clogging, low-temperature filament (PLA/" -#~ "PETG/TPU) is not allowed to be loaded." -#~ msgstr "" -#~ "Aktualna temperatura komory lub docelowa temperatura komory przekracza " -#~ "45℃. Aby uniknąć zatkania ekstruzora, niedopuszczalne jest ładowanie " -#~ "filamentu o niskiej temperaturze (PLA/PETG/TPU)." - #~ msgid "" #~ "Low-temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " #~ "order to avoid extruder clogging, it is not allowed to set the chamber " @@ -18663,23 +24051,6 @@ msgstr "" #~ "TPU). Aby uniknąć zatkania ekstruzora, nie wolno ustawiać temperatury " #~ "komory powyżej 45℃." -#~ msgid "" -#~ "Damp PVA will become flexible and get stuck inside AMS, please take care " -#~ "to dry it before use." -#~ msgstr "" -#~ "Wilgotne PVA staje się elastyczne i może utknąć wewnątrz AMS, proszę " -#~ "pamiętać o wysuszeniu go przed użyciem." - -#~ msgid "" -#~ "CF/GF filaments are hard and brittle, it's easy to break or get stuck in " -#~ "AMS, please use with caution." -#~ msgstr "" -#~ "Filamenty CF/GF są twarde i kruche, łatwo je złamać lub zatrzymać w AMS, " -#~ "proszę używać ostrożnie." - -#~ msgid "%s can't be a percentage" -#~ msgstr "%s nie może być procentem" - #~ msgid "" #~ "Is it %s%% or %s %s?\n" #~ "YES for %s%%,\n" @@ -18692,25 +24063,6 @@ msgstr "" #~ msgid "Allow multiple materials on the same plate" #~ msgstr "Pozwól na kilka filamentów na tej samej płycie" -#~ msgid "An object is laid over the boundary of plate." -#~ msgstr "Obiekt jest położony poza granicą płyty." - -#~ msgid "Only the object being edited is visible." -#~ msgstr "Widoczny jest tylko edytowany obiekt." - -#~ msgid "Connect Printer (LAN)" -#~ msgstr "Podłącz drukarkę (LAN)" - -#~ msgid "Show g-code window in Preview scene" -#~ msgstr "Pokaż okno G-code w scenie podglądu" - -#~ msgid "" -#~ "Please heat the nozzle to above 170 degrees before loading or unloading " -#~ "filament." -#~ msgstr "" -#~ "Przed załadowaniem lub rozładowaniem filamentu podgrzej dyszę do " -#~ "temperatury powyżej 170 stopni." - #~ msgid "" #~ "Cannot read filament info: the filament is loaded to the tool head, " #~ "please unload the filament and try again." @@ -18718,16 +24070,6 @@ msgstr "" #~ "Nie można odczytać informacji o filamentach: filament jest załadowany w " #~ "głowicy narzędzia, proszę go wyładować i spróbować ponownie." -#~ msgid "" -#~ "At least one successful print record of this print profile is required \n" -#~ "to give a positive rating (4 or 5 stars)." -#~ msgstr "" -#~ "Aby wystawić pozytywną ocenę (4 lub 5 gwiazdek), wymagana jest co " -#~ "najmniej jedna udana rejestracja tego profilu druku." - -#~ msgid "Your model needs support! Please make support material enable." -#~ msgstr "Twój model wymaga podpór! Włącz generowanie podpór." - #~ msgid "" #~ "No AMS filaments. Please select a printer in the 'Device' page to load " #~ "AMS info." @@ -18764,21 +24106,6 @@ msgstr "" #~ msgid "The Config cannot be loaded." #~ msgstr "Konfiguracja nie może być wczytana." -#~ msgid "" -#~ "The 3mf is generated by the old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "Plik 3MF jest generowany przez starą wersję Snapmaker Orca, wczytuj tylko " -#~ "dane geometrii." - -#~ msgid "" -#~ "The 3mf has the following modified G-codes in filament or printer presets:" -#~ msgstr "" -#~ "Plik 3MF ma następujące zmodyfikowane kody G w profilach filamentu lub " -#~ "drukarki:" - -#~ msgid "The 3mf has the following customized filament or printer presets:" -#~ msgstr "Plik 3MF ma następujące dostosowane profile filamentu lub drukarki:" - #~ msgid "" #~ "„Fix Model” feature is currently only on Windows. Please repair the model " #~ "on Snapmaker Orca(windows) or CAD softwares." @@ -18792,68 +24119,15 @@ msgstr "" #~ "Zmiana języka aplikacji przy jednoczesnym istniejących zmodyfikowanych " #~ "ustawieniach" -#~ msgid "Note: The preparation may takes several minutes. Please be patient." -#~ msgstr "Uwaga: Przygotowanie może zająć kilka minut. Proszę o cierpliwość." - #~ msgid "" -#~ "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -#~ "device, please read the terms and conditions.By clicking to agree to use " -#~ "your Bambu Lab device, you agree to abide by the Privacy Policy and Terms " -#~ "of Use(collectively, the \"Terms\"). If you do not comply with or agree " -#~ "to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment " -#~ "and services." -#~ msgstr "" -#~ "Dziękujemy za zakup urządzenia Bambu Lab. Przed użyciem urządzenia Bambu " -#~ "Lab proszę przeczytać warunki i zasady. Klikając, aby zgodzić się na " -#~ "używanie urządzenia Bambu Lab, zgadzasz się przestrzegać Polityki " -#~ "Prywatności i Warunków Użytkowania (razem \"Warunki\"). Jeśli nie " -#~ "zgadzasz się lub nie przestrzegasz Polityki Prywatności Bambu Lab, proszę " -#~ "nie używać sprzętu i usług Bambu Lab." - -#~ msgid "" -#~ "In the 3D Printing community, we learn from each other's successes and " -#~ "failures to adjust our own slicing parameters and settings. %s follows " -#~ "the same principle and uses machine learning to improve its performance " -#~ "from the successes and failures of the vast number of prints by our " -#~ "users. We are training %s to be smarter by feeding them the real-world " -#~ "data. If you are willing, this service will access information from your " -#~ "error logs and usage logs, which may include information described in " -#~ "Privacy Policy. We will not collect any Personal Data by which an " -#~ "individual can be identified directly or indirectly, including without " -#~ "limitation names, addresses, payment information, or phone numbers. By " -#~ "enabling this service, you agree to these terms and the statement about " -#~ "Privacy Policy." -#~ msgstr "" -#~ "W społeczności druku 3D uczymy się od siebie nawzajem, korzystając z " -#~ "sukcesów i porażek, aby dostosować nasze parametry i ustawienia cięcia. " -#~ "%s stosuje tę samą zasadę i wykorzystuje uczenie maszynowe do poprawy " -#~ "swojej wydajności na podstawie sukcesów i porażek ogromnej liczby " -#~ "wydruków naszych użytkowników. Szkolimy %s, aby było mądrzejsze, " -#~ "dostarczając mu danych z rzeczywistego świata. Jeśli wyrażasz zgodę, ta " -#~ "usługa uzyska dostęp do informacji z Twoich logów błędów i dzienników " -#~ "użycia, które mogą zawierać informacje opisane w Polityce Prywatności. " -#~ "Nie będziemy zbierać żadnych danych osobowych, dzięki którym można by " -#~ "bezpośrednio lub pośrednio zidentyfikować osobę, w tym między innymi " -#~ "nanawisk, adresów, informacji o płatnościach czy numerów telefonów. " -#~ "Włączając tę usługę, zgadzasz się na te warunki i oświadczenie o Polityce " -#~ "Prywatności." - -#~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Change these settings automatically\n" #~ "No - Do not change these settings for me" #~ msgstr "" -#~ "Zmienić te ustawienia automatycznie? \n" +#~ "Zmienić te ustawienia automatycznie?\n" #~ "Tak - Zmień te ustawienia automatycznie\n" #~ "Nie - Nie zmieniaj tych ustawień dla mnie" -#~ msgid "" -#~ "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -#~ "height limits, this may cause printing quality issues." -#~ msgstr "" -#~ "Wysokość warstwy przekracza limit w Ustawieniach Drukarki -> Extruder -> " -#~ "Limity wysokości warstwy, co może powodować problemy z jakością druku." - #~ msgid "Delete objects, parts, modifiers " #~ msgstr "Usuń obiekty, części, modyfikatory " @@ -18864,19 +24138,6 @@ msgstr "" #~ "Połączenie nieudane! Jeśli twój IP i kod dostępu są poprawne, przejdź do " #~ "kroku 3, aby rozwiązać problemy z siecią" -#, c-format -#~ msgid "" -#~ "Force cooling fan to be specific speed when overhang degree of printed " -#~ "part exceeds this value.Expressed as percentage which indicides how much " -#~ "width of the line without support from lower layer. 0% means forcing " -#~ "cooling for all outer wall no matter how much overhang degree" -#~ msgstr "" -#~ "Wymuś pracę wentylatora chłodzącego na określoną prędkość, gdy stopień " -#~ "nawisu drukowanej części przekracza tę wartość. Wyrażone w procentach, co " -#~ "wskazuje, jak duża jest szerokość linii bez podpór z niższej warstwy. 0%% " -#~ "oznacza wymuszanie chłodzenia dla całej zewnętrznej ściany, bez względu " -#~ "na stopień nawisu" - #, c-format, boost-format #~ msgid "" #~ "Number of mm the overhang need to be for the reversal to be considered " @@ -18888,27 +24149,12 @@ msgstr "" #~ "Wartość 0 umożliwia odwrócenie na każdej nieparzystej warstwie, " #~ "niezależnie od wszystkiego." -#~ msgid "" -#~ "Smooth Spiral smoothes out X and Y moves as well resulting in no visible " -#~ "seam at all, even in the XY directions on walls that are not vertical" -#~ msgstr "" -#~ "Smooth Spiral wygładza również ruchy w osiach X i Y, co skutkuje brakiem " -#~ "widocznych szwów, nawet w kierunkach XY na ścianach, które nie są pionowe" - -#~ msgid "" -#~ "Maximum distance to move points in XY to try to achieve a smooth spiral. " -#~ "If expressed as a %, it will be computed over nozzle diameter" -#~ msgstr "" -#~ "Maksymalna odległość przesuwania punktów w XY, aby osiągnąć gładką " -#~ "spiralę. Jeśli wyrażona w procentach, będzie obliczona na podstawie " -#~ "średnicy dyszy" - #, c-format, boost-format #~ msgid "" #~ "Maximum defection of a point to the estimated radius of the circle.\n" #~ "As cylinders are often exported as triangles of varying size, points may " -#~ "not be on the circle circumference. This setting allows you some leway to " -#~ "broaden the detection.\n" +#~ "not be on the circle circumference. This setting allows you some leeway " +#~ "to broaden the detection.\n" #~ "In mm or in %% of the radius." #~ msgstr "" #~ "Maksymalne odchylenie punktu od szacowanego promienia koła.\n" @@ -18921,10 +24167,10 @@ msgstr "" #~ msgstr "Pliki certyfikatów (.crt, .pem)|.crt;.pem|Wszystkie pliki|." #~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." +#~ "Relative extrusion is recommended when using \"label_objects\" option. " #~ "Some extruders work better with this option unchecked (absolute extrusion " #~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" +#~ "enabled on BambuLab printers. Default is checked." #~ msgstr "" #~ "Przy użyciu opcji \"label_objects\" zaleca się ekstruzję względną. " #~ "Niektóre ekstrudery działają lepiej, gdy ta opcja jest odznaczona (tryb " @@ -18983,14 +24229,14 @@ msgstr "" #~ "Tak - przełącz automatycznie na wzór prostoliniowy\n" #~ "Nie - automatycznie zresetuj gęstość do domyślnej wartości nie 100%" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "" #~ "Proszę podgrzać dyszę do ponad 170 stopni przed załadowaniem filamentu." -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "Pokaż okno G-kodu" -#~ msgid "If enabled, g-code window will be displayed." +#~ msgid "If enabled, G-code window will be displayed." #~ msgstr "Jeśli włączone, okno G-kodu zostanie wyświetlone." #, fuzzy, c-format @@ -19009,9 +24255,6 @@ msgstr "" #~ msgid " doesn't work at 100%% density " #~ msgstr " nie działa przy 100% gęstości " -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Narzędzie - Połóż na Powierzchni" @@ -19032,7 +24275,7 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Eksportuj wszystkie obiekty jako STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "3mf nie jest kompatybilny, załaduj tylko dane geometryczne!" #~ msgid "Incompatible 3mf" @@ -19093,160 +24336,10 @@ msgstr "" #~ msgid "%%" #~ msgstr "%%" -#~ msgid "Export 3MF" -#~ msgstr "Eksportuj 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Eksportuj projekt jako 3MF." - -#~ msgid "Export slicing data" -#~ msgstr "Eksportuj dane slicowania" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Eksportuj dane slicowania do folderu." - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Załaduj buforowane dane slicowania z katalogu" - -#~ msgid "Export STL" -#~ msgstr "Eksportuj STL" - #~ msgid "Export the objects as multiple STL." #~ msgstr "Eksportuj obiekty jako wiele plików STL." -#~ msgid "Slice" -#~ msgstr "Slice" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Slice podłoża: 0-wszystkie podłoża, i-podłoże i, inne-nieważne" - -#~ msgid "Show command help." -#~ msgstr "Pokaż pomoc komendy." - -#~ msgid "UpToDate" -#~ msgstr "Aktualne" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Zaktualizuj wartości konfiguracji 3mf do najnowszych." - -#~ msgid "Load default filaments" -#~ msgstr "Załaduj domyślne filamenty" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "" -#~ "Załaduj pierwszy filament jako domyślny dla tych, które nie zostały " -#~ "załadowane" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "maksymalna liczba trójkątów na podłoże do slicowania." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "maksymalny czas slicowania na podłoże w sekundach." - -#~ msgid "Normative check" -#~ msgstr "Kontrola normatywna" - -#~ msgid "Check the normative items." -#~ msgstr "Sprawdź elementy normatywne." - -#~ msgid "Output Model Info" -#~ msgstr "Informacje o modelu wyjściowym" - -#~ msgid "Output the model's information." -#~ msgstr "Wyświetl informacje o modelu." - -#~ msgid "Export Settings" -#~ msgstr "Ustawienia eksportu" - -#~ msgid "Export settings to a file." -#~ msgstr "Eksportuj ustawienia do pliku." - -#~ msgid "Send progress to pipe" -#~ msgstr "Wyślij postęp do rury" - -#~ msgid "Send progress to pipe." -#~ msgstr "Wyślij postęp do rury." - -#~ msgid "Arrange Options" -#~ msgstr "Opcje aranżacji" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Opcje aranżacji: 0-wyłącz, 1-włącz, inne-auto" - -#~ msgid "Repetions count" -#~ msgstr "Liczba powtórzeń" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Liczba powtórzeń całego modelu" - -#~ msgid "Convert Unit" -#~ msgstr "Konwertuj jednostkę" - -#~ msgid "Convert the units of model" -#~ msgstr "Konwertuj jednostki modelu" - -#~ msgid "Rotate around X" -#~ msgstr "Obróć wokół osi X" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "Kąt obrotu wokół osi X w stopniach." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Skaluj model przez czynnik zmiennoprzecinkowy" - -#~ msgid "Load General Settings" -#~ msgstr "Załaduj ustawienia ogólne" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Załaduj ustawienia procesu/maszyny z określonego pliku" - -#~ msgid "Load Filament Settings" -#~ msgstr "Załaduj ustawienia filamentu" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Załaduj ustawienia filamentu z określonej listy plików" - -#~ msgid "Skip Objects" -#~ msgstr "Pomiń obiekty" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Pomiń niektóre obiekty w tym druku" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "" -#~ "załaduj aktualne ustawienia procesu/maszyny podczas korzystania z " -#~ "aktualizacji" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "załaduj aktualne ustawienia procesu/maszyny z określonego pliku podczas " -#~ "korzystania z aktualizacji" - -#~ msgid "Output directory" -#~ msgstr "Katalog wyjściowy" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Katalog wyjściowy dla eksportowanych plików." - -#~ msgid "Debug level" -#~ msgstr "Poziom debugowania" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Ustawia poziom logowania debugowania. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" - -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "Wybrana przędło: %1% nie została znaleziona." #~ msgid "" @@ -19258,21 +24351,12 @@ msgstr "" #~ "Czy wiesz, jak kontrolować widok i wybór obiektów/części za pomocą myszy " #~ "i panelu dotykowego w scenie 3D?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Napraw model\n" -#~ "Czy wiesz, że możesz naprawić uszkodzony model 3D, aby uniknąć wielu " -#~ "problemów z krojeniem?" - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Osadzone" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" #~ "Plik konfiguracyjny Snapmaker Orca może być uszkodzony i nie można go " #~ "przeanalizować. Proszę usunąć plik i spróbować ponownie." @@ -19288,12 +24372,12 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" +#~ "automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same " #~ "brand, material type, and color)" #~ msgstr "" #~ "Obecnie nie ma dostępnych identycznych zapasowych materiałów " -#~ "eksploatacyjnych, i automatyczne uzupełnianie nie jest obecnie możliwe. \n" +#~ "eksploatacyjnych, i automatyczne uzupełnianie nie jest obecnie możliwe.\n" #~ "(Obecnie obsługiwane jest automatyczne zaopatrzenie w materiały " #~ "eksploatacyjne tej samej marki, typu materiału i koloru)" @@ -19361,14 +24445,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "Kalibracja ekstruzji" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Wsuń nowy filament do ekstrudera" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "Temperatura podłoża innych warstw jest niższa niż temperatura podłoża " #~ "pierwszej warstwy o więcej niż %d stopni Celsjusza.\n" @@ -19415,8 +24496,8 @@ msgstr "" #~ msgstr "Płyta wysokotemperaturowa" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Temperatura podłoża, gdy jest zainstalowana płyta wysokotemperaturowa. " #~ "Wartość 0 oznacza, że filament nie obsługuje drukowania na Płycie " @@ -19427,7 +24508,7 @@ msgstr "" #~ msgid "" #~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " +#~ "internal bridges. These support loops could prevent internal bridges from " #~ "extruding over the air and improve the top surface quality, especially " #~ "when the sparse infill density is low. This value determines the " #~ "thickness of the support loops. 0 means disable this feature" @@ -19438,13 +24519,6 @@ msgstr "" #~ "wypełnienia jest niska. Ta wartość określa grubość pętli podpory. 0 " #~ "oznacza wyłączenie tej funkcji" -#, fuzzy, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "" -#~ "Maksymalne przyspieszenie Klippera max_accel_to_decel zostanie " -#~ "dostosowane do tego % przyspieszenia" - #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the " #~ "supports into a regular grid will create more stable supports (default), " @@ -19483,7 +24557,7 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Proszę podać poprawne wartości:\n" #~ "start > 0 krok >= 0\n" @@ -19492,8 +24566,8 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Proszę podać poprawne wartości:\n" #~ "start > 10 kroków >= 0\n" -#~ "koniec > start + krok)" +#~ "koniec > start + krok)" \ No newline at end of file diff --git a/localization/i18n/pt_BR/Snapmaker_Orca_pt_BR.po b/localization/i18n/pt_BR/Snapmaker_Orca_pt_BR.po index 7321b48768..78a127a190 100644 --- a/localization/i18n/pt_BR/Snapmaker_Orca_pt_BR.po +++ b/localization/i18n/pt_BR/Snapmaker_Orca_pt_BR.po @@ -1,40 +1,166 @@ # msgid "" msgstr "" +"Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2024-06-01 21:51-0300\n" -"Last-Translator: \n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-11-15 17:50-0300\n" +"Last-Translator: Alexandre Folle de Menezes\n" "Language-Team: Portuguese, Brazilian\n" "Language: pt_BR\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Crowdin-File: Snapmaker_Orca.pot\n" +"X-Crowdin-File: Snapmaker Orca.pot\n" "X-Crowdin-File-ID: 10\n" "X-Crowdin-Language: pt-BR\n" "X-Crowdin-Project: Snapmaker Orca-pt-br\n" "X-Crowdin-Project-ID: 664934\n" -"X-Generator: Poedit 3.4.4\n" +"X-Generator: Poedit 3.8\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" +"O filamento pode não ser compatível com as configurações atuais da máquina. " +"Serão usadas predefinições genéricas predefinidas de filamento." + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" +"O modelo do filamento é desconhecido. Usando a predefinição de filamento " +"anterior." + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" +"O modelo do filamento é desconhecido. Serão usadas predefinições genéricas " +"predefinidas de filamento." + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" +"O filamento pode não ser compatível com as configurações atuais da máquina. " +"Uma predefinição de filamento aleatória será usada." + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" +"O modelo do filamento é desconhecido. Uma predefinição de filamento " +"aleatória será usada." + +msgid "right" +msgstr "direita" + +msgid "left" +msgstr "esquerda" + +msgid "right extruder" +msgstr "extrusora direita" + +msgid "left extruder" +msgstr "extrusora esquerda" + +msgid "extruder" +msgstr "extrusora" + +msgid "TPU is not supported by AMS." +msgstr "TPU não é suportado pelo AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"O PVA úmido se tornará flexível e ficará preso dentro do AMS, por favor " +"tenha cuidado para secá-lo antes de usar." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" +"O PVA úmido é flexível e pode ficar preso na extrusora. Seque-o antes de " +"usar." + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" +"A superfície áspera do PLA Glow pode acelerar o desgaste do sistema AMS, " +"particularmente nos componentes internos do AMS Lite." + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Os filamentos CF/GF são duros e quebradiços, é fácil quebrar ou ficar preso " +"no AMS, por favor use com cautela." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" +"O PPS-CF é quebradiço e pode quebrar no tubo de PTFE dobrado acima da " +"extrusora." + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" +"O PPA-CF é quebradiço e pode quebrar no tubo de PTFE dobrado acima da " +"extrusora." + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "%s não é suportado pela extrusora %s." + +msgid "Current AMS humidity" +msgstr "Umidade AMS atual" + +msgid "Humidity" +msgstr "Umidade" + +msgid "Temperature" +msgstr "Temperatura" + +msgid "Left Time" +msgstr "Tempo Restante" + +msgid "Drying" +msgstr "Secando" + +msgid "Idle" +msgstr "Inativo" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "%d ℃" + +msgid "Serial:" +msgstr "Número de série:" + +msgid "Version:" +msgstr "Versão:" + +msgid "Latest version" +msgstr "Última versão" + +msgid "Support Painting" msgstr "Pintura de Suportes" -msgid "Alt + Mouse wheel" -msgstr "Alt + Roda do Mouse" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Roda do mouse" msgid "Section view" -msgstr "Vista Planar" +msgstr "Vista de seção" msgid "Reset direction" msgstr "Redefinir direção" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Roda do Mouse" - msgid "Pen size" -msgstr "Tamanho" +msgstr "Tamanho da caneta" msgid "Left mouse button" msgstr "Botão esquerdo do mouse" @@ -48,9 +174,6 @@ msgstr "Botão direito do mouse" msgid "Block supports" msgstr "Bloquear suportes" -msgid "Shift + Left mouse button" -msgstr "Shift + Botão esquerdo do mouse" - msgid "Erase" msgstr "Apagar" @@ -58,7 +181,7 @@ msgid "Erase all painting" msgstr "Apagar toda a pintura" msgid "Highlight overhang areas" -msgstr "Destacar áreas com 'overhangs'" +msgstr "Realçar áreas com saliências" msgid "Gap fill" msgstr "Preenchimento de vão" @@ -67,21 +190,19 @@ msgid "Perform" msgstr "Executar" msgid "Gap area" -msgstr "Área das lacunas" +msgstr "Área de vão" msgid "Tool type" -msgstr "Tipo da Ferramenta" +msgstr "Tipo de ferramenta" msgid "Smart fill angle" -msgstr "" -"Ângulo do\n" -"preench. inteligente" +msgstr "Ângulo de preenchimento inteligente" msgid "On overhangs only" -msgstr "Apenas em 'overhangs'" +msgstr "Apenas em saliências" msgid "Auto support threshold angle: " -msgstr "Ângulo max. do suporte automático: " +msgstr "Ângulo limiar de suporte automático: " msgid "Circle" msgstr "Círculo" @@ -93,14 +214,14 @@ msgid "Fill" msgstr "Preencher" msgid "Gap Fill" -msgstr "Preencher lacunas" +msgstr "Preencher vão" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Permite pintura apenas em facetas selecionadas por: \"%1%\"" msgid "Highlight faces according to overhang angle." -msgstr "Realçar faces conforme a inclinação." +msgstr "Realçar faces conforme o ângulo de saliência." msgid "No auto support" msgstr "Sem suporte automático" @@ -116,7 +237,7 @@ msgstr "Apoiar face à superfície" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "A contagem de filamentos excede o número máximo que a ferramenta de pintura " @@ -127,7 +248,7 @@ msgid "Color Painting" msgstr "Pintura de cores" msgid "Pen shape" -msgstr "Formato da Caneta" +msgstr "Formato da caneta" msgid "Paint" msgstr "Pintar" @@ -139,7 +260,7 @@ msgid "Choose filament" msgstr "Escolher filamento" msgid "Edge detection" -msgstr "Detecção de Borda" +msgstr "Detecção de borda" msgid "Triangles" msgstr "Triângulos" @@ -151,22 +272,31 @@ msgid "Brush" msgstr "Pincel" msgid "Smart fill" -msgstr "Preenchimento Inteligente" +msgstr "Preenchimento inteligente" msgid "Bucket fill" -msgstr "Balde de preenchimento" +msgstr "Preenchimento de balde" msgid "Height range" msgstr "Intervalo de altura" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "Enter" msgid "Toggle Wireframe" -msgstr "Alternar Wireframe" +msgstr "Alternar Malha" + +msgid "Remap filaments" +msgstr "Remapear filamentos" + +msgid "Remap" +msgstr "Remapear" + +msgid "Cancel" +msgstr "Cancelar" msgid "Shortcut Key " -msgstr "Tecla " +msgstr "Tecla de atalho " msgid "Triangle" msgstr "Triângulo" @@ -187,9 +317,33 @@ msgstr "Remover cor pintada" msgid "Painted using: Filament %1%" msgstr "Pintado usando: Filamento %1%" +msgid "Filament remapping finished." +msgstr "Remapeamento de filamentos concluído." + +msgid "Paint-on fuzzy skin" +msgstr "Textura difusa pintada" + +msgid "Brush size" +msgstr "Tamanho do pincel" + +msgid "Brush shape" +msgstr "Formato do pincel" + +msgid "Add fuzzy skin" +msgstr "Adicionar textura difusa" + +msgid "Remove fuzzy skin" +msgstr "Remover textura difusa" + +msgid "Reset selection" +msgstr "Redefinir seleção" + msgid "Move" msgstr "Mover" +msgid "Please select at least one object." +msgstr "Por favor selecione pelo menos um objeto." + msgid "Gizmo-Move" msgstr "Gizmo-Mover" @@ -215,38 +369,41 @@ msgid "Error: Please close all toolbar menus first" msgstr "Erro: Por favor, feche todos os menus da barra de ferramentas primeiro" msgid "in" -msgstr "in" +msgstr "pol" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "Seleção de peça" + +msgid "Fixed step drag" +msgstr "Arrasto de passo fixo" + +msgid "Single sided scaling" +msgstr "Escala unilateral" + msgid "Position" msgstr "Posição" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotação" +msgid "Rotate (relative)" +msgstr "Rotacionar (relativo)" msgid "Scale ratios" msgstr "Proporções de escala" msgid "Object Operations" -msgstr "Operações do Objeto" +msgstr "Operações de Objeto" msgid "Volume Operations" msgstr "Operações de Volume" msgid "Translate" -msgstr "Traduzir" +msgstr "Translacionar" msgid "Group Operations" msgstr "Operações de Grupo" -msgid "Set Position" -msgstr "Definir Posição" - msgid "Set Orientation" msgstr "Definir Orientação" @@ -259,30 +416,39 @@ msgstr "Redefinir Posição" msgid "Reset Rotation" msgstr "Redefinir Rotação" -msgid "World coordinates" -msgstr "Coordenadas globais" - msgid "Object coordinates" msgstr "Coordenadas do objeto" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Coordenadas globais" + +msgid "Translate(Relative)" +msgstr "Translacionar(Relativo)" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Redefinir rotação para o valor de abertura da ferramenta de rotação." + +msgid "Rotate (absolute)" +msgstr "Rotacionar (absoluto)" + +msgid "Reset current rotation to real zeros." +msgstr "Redefinir rotação atual para zeros reais." + +msgid "Part coordinates" +msgstr "Coordenadas de peça" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Tamanho" -msgid "%" -msgstr "%" - msgid "uniform scale" -msgstr "Escala uniforme" +msgstr "escala uniforme" msgid "Planar" msgstr "Plano" msgid "Dovetail" -msgstr "Encaixe" +msgstr "Cauda de Andorinha" msgid "Auto" msgstr "Auto" @@ -303,7 +469,7 @@ msgid "Prism" msgstr "Prisma" msgid "Frustum" -msgstr "Tronco" +msgstr "Frustum" msgid "Square" msgstr "Quadrado" @@ -338,6 +504,12 @@ msgstr "Forma" msgid "Depth" msgstr "Profundidade" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotação" + msgid "Groove" msgstr "Cavidade" @@ -360,7 +532,7 @@ msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" -"Clique para girar o plano de corte\n" +"Clique para virar o plano de corte\n" "Arraste para mover o plano de corte" msgid "" @@ -368,7 +540,7 @@ msgid "" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" -"Clique para girar o plano de corte\n" +"Clique para virar o plano de corte\n" "Arraste para mover o plano de corte\n" "Clique com o botão direito em uma peça para atribuí-la ao outro lado" @@ -438,9 +610,6 @@ msgstr "Proporção de espaço em relação ao raio" msgid "Confirm connectors" msgstr "Confirmar conectores" -msgid "Cancel" -msgstr "Cancelar" - msgid "Build Volume" msgstr "Volume de Impressão" @@ -535,10 +704,10 @@ msgstr "Cortar por Plano" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" "as arestas abertas podem ser causadas pela ferramenta de corte, você quer " -"corrigi-las agora?" +"corrigí-las agora?" msgid "Repairing model object" -msgstr "Reparando objeto do modelo" +msgstr "Reparando objeto modelo" msgid "Cut by line" msgstr "Corte por linha" @@ -571,7 +740,8 @@ msgstr "Simplificar" msgid "Simplification is currently only allowed when a single part is selected" msgstr "" -"A simplificação só é permitida quando uma única peça é selecionada no momento" +"A simplificação só é permitida atualmente quando uma única peça está " +"selecionada" msgid "Error" msgstr "Erro" @@ -596,18 +766,15 @@ msgid "%d triangles" msgstr "%d triângulos" msgid "Show wireframe" -msgstr "Mostrar wireframe" +msgstr "Mostrar malha" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "" -"Não é possível aplicar quando a visualização do processo está em andamento." +"Não é possível aplicar quando a pré-visualização do processo está em " +"andamento." -msgid "Operation already cancelling. Please wait few seconds." -msgstr "Operação já sendo cancelada. Por favor, aguarde alguns segundos." +msgid "Operation already cancelling. Please wait a few seconds." +msgstr "Operação já está sendo cancelada. Por favor, aguarde alguns segundos." msgid "Face recognition" msgstr "Reconhecimento facial" @@ -615,12 +782,6 @@ msgstr "Reconhecimento facial" msgid "Perform Recognition" msgstr "Realizar Reconhecimento" -msgid "Brush size" -msgstr "Tamanho" - -msgid "Brush shape" -msgstr "Formato do pincel" - msgid "Enforce seam" msgstr "Forçar costura" @@ -651,17 +812,17 @@ msgid "Thickness" msgstr "Espessura" msgid "Text Gap" -msgstr "Espaço de Texto" +msgstr "Vão de Texto" msgid "Angle" msgstr "Ângulo" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Profundidade\n" -"Integrada" +"embutida" msgid "Input text" msgstr "Texto de entrada" @@ -672,8 +833,8 @@ msgstr "Superfície" msgid "Horizontal text" msgstr "Texto horizontal" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mover mouse para cima ou para baixo" +msgid "Mouse move up or down" +msgstr "Mover mouse para cima ou para baixo" msgid "Rotate text" msgstr "Rotacionar texto" @@ -753,7 +914,7 @@ msgid "Text input doesn't show font boldness." msgstr "A entrada de texto não mostra a negrito da fonte." msgid "Text input doesn't show gap between lines." -msgstr "A entrada de texto não mostra o espaçamento entre linhas." +msgstr "A entrada de texto não mostra o vão entre linhas." msgid "Too tall, diminished font height inside text input." msgstr "Muito alto, altura da fonte diminuída dentro da entrada de texto." @@ -800,8 +961,8 @@ msgid "Change Text Type" msgstr "Alterar tipo de texto" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "Renomear estilo(%1%) para texto em relevo" +msgid "Rename style (%1%) for embossing text" +msgstr "Renomear estilo (%1%) para texto em relevo" msgid "Name can't be empty." msgstr "O nome não pode estar vazio." @@ -810,7 +971,7 @@ msgid "Name has to be unique." msgstr "O nome tem que ser único." msgid "OK" -msgstr "Certo" +msgstr "OK" msgid "Rename style" msgstr "Renomear estilo" @@ -962,13 +1123,13 @@ msgid "points" msgstr "pontos" msgid "Revert gap between characters" -msgstr "Reverter espaçamento entre caracteres" +msgstr "Reverter vão entre caracteres" msgid "Distance between characters" msgstr "Distância entre caracteres" msgid "Revert gap between lines" -msgstr "Reverter espaçamento entre linhas" +msgstr "Reverter vão entre linhas" msgid "Distance between lines" msgstr "Distância entre linhas" @@ -995,7 +1156,7 @@ msgid "Undo rotation" msgstr "Desfazer rotação" msgid "Rotate text Clock-wise." -msgstr "Girar o texto no sentido horário." +msgstr "Rotacionar texto no sentido Horário." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "" @@ -1014,10 +1175,14 @@ msgstr "Fazer texto para virar para a câmera" msgid "Orient the text towards the camera." msgstr "Orientar o texto em direção à câmera." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "A fonte \"%1%\" não pode ser usada. Por favor selecione outra." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "Não é possível carregar a mesma fonte exatamente (\"%1%\"). A aplicação " "selecionou uma similar (\"%2%\"). Você deve especificar uma fonte para " @@ -1056,11 +1221,11 @@ msgstr "Alinhamento" #. TRN - Input label. Be short as possible msgid "Char gap" -msgstr "Espaço de caractere" +msgstr "Vão de caractere" #. TRN - Input label. Be short as possible msgid "Line gap" -msgstr "Espaço de linha" +msgstr "Vão de linha" #. TRN - Input label. Be short as possible msgid "Boldness" @@ -1133,11 +1298,11 @@ msgstr "Caminho preenchido aberto" msgid "Undefined stroke type" msgstr "Tipo de traço indefinido" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "O caminho não pode ser reparado de auto-interseção e pontos múltiplos." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "A forma final contém auto-interseção ou múltiplos pontos com mesma " @@ -1147,7 +1312,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "A forma está marcada como invisível (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "O preenchimento da forma (%1%) contém não suportado: %2%." @@ -1177,8 +1342,8 @@ msgstr "Recarregar arquivo SVG do disco." msgid "Change file" msgstr "Alterar arquivo" -msgid "Change to another .svg file" -msgstr "Mudar para outro arquivo .svg" +msgid "Change to another SVG file." +msgstr "Mudar para outro arquivo SVG." msgid "Forget the file path" msgstr "Esquecer o caminho do arquivo" @@ -1204,8 +1369,8 @@ msgstr "Salvar como" msgid "Save SVG file" msgstr "Salvar arquivo SVG" -msgid "Save as '.svg' file" -msgstr "Salvar como arquivo '.svg'" +msgid "Save as SVG file." +msgstr "Salvar como arquivo SVG." msgid "Size in emboss direction." msgstr "Tamanho na direção de relevo." @@ -1273,6 +1438,9 @@ msgstr "O analisador Nano SVG não pode carregar do arquivo (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "O arquivo SVG NÃO contém um único caminho para ser relevado (%1%)." +msgid "No feature" +msgstr "Sem recurso" + msgid "Vertex" msgstr "Vértice" @@ -1297,9 +1465,6 @@ msgstr "Centro da borda" msgid "Center of circle" msgstr "Centro do círculo" -msgid "ShiftLeft mouse button" -msgstr "Botão do mouse ShiftLeft" - msgid "Select feature" msgstr "Selecionar recurso" @@ -1315,18 +1480,23 @@ msgstr "Reiniciar seleção" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Desmarcar" +msgid "Cancel a feature until exit" +msgstr "Cancelar um recurso até sair" msgid "Measure" msgstr "Medir" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Por favor, confirme a taxa de explosão = 1, e selecione pelo menos um objeto." + msgid "Edit to scale" msgstr "Editar para escala" msgctxt "Verb" -msgid "Scale" -msgstr "Escala" +msgid "Scale all" +msgstr "Escalar tudo" msgid "None" msgstr "Nenhum" @@ -1340,6 +1510,48 @@ msgstr "Comprimento" msgid "Selection" msgstr "Seleção" +msgid " (Moving)" +msgstr " (Movendo)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Selecione 2 faces em objetos e faça\n" +"com que os objetos se montem." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Selecione 2 pontos ou círculos em objetos\n" +"e especifique a distância entre eles." + +msgid "Face" +msgstr "Face" + +msgid " (Fixed)" +msgstr " (Fixo)" + +msgid "Point" +msgstr "Ponto" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"O recurso 1 foi redefinido, \n" +"o recurso 2 foi o recurso 1" + +msgid "Warning: please select Plane's feature." +msgstr "Aviso: por favor selecione o recurso do Plano." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Aviso: por favor selecione o recurso do Ponto ou do Círculo." + +msgid "Warning: please select two different meshes." +msgstr "Aviso: por favor selecione duas malhas diferentes." + msgid "Copy to clipboard" msgstr "Copiar para a área de transferência" @@ -1355,8 +1567,26 @@ msgstr "Distância direta" msgid "Distance XYZ" msgstr "Distância XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Paralelo" + +msgid "Center coincidence" +msgstr "Centralizar coincidência" + +msgid "Feature 1" +msgstr "Recurso 1" + +msgid "Reverse rotation" +msgstr "Rotação reversa" + +msgid "Rotate around center:" +msgstr "Rotacionar ao redor do centro:" + +msgid "Parallel distance:" +msgstr "Distância paralela:" + +msgid "Flip by Face 2" +msgstr "Virar pela Face 2" msgid "Notice" msgstr "Aviso" @@ -1397,8 +1627,11 @@ msgstr "" "O arquivo de configuração \"%1%\" foi carregado, mas alguns valores não " "foram reconhecidos." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Baseado no PrusaSlicer e Bambu Studio" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca será encerrado devido à falta de memória. Pode ser um bug. " @@ -1442,13 +1675,17 @@ msgid "" "features.\n" "Click Yes to install it now." msgstr "" -"Snapmaker Orca requer o tempo de execução Microsoft WebView2 para operar " -"determinados recursos.\n" +"O Snapmaker Orca requer o Microsoft WebView2 Runtime para operar determinados " +"recursos.\n" "Clique em Sim para instalá-lo agora." msgid "WebView2 Runtime" msgstr "Tempo de execução WebView2" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "O caminho dos recursos não existe ou não é um diretório: %s" + #, c-format, boost-format msgid "" "%s\n" @@ -1468,7 +1705,7 @@ msgid "Click to download new version in default browser: %s" msgstr "Clique para baixar a nova versão no navegador padrão: %s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "O Snapmaker Orca precisa ser atualizado" +msgstr "O Snapmaker Orca precisa de uma atualização" msgid "This is the newest version." msgstr "Esta é a versão mais recente." @@ -1492,35 +1729,35 @@ msgid "Rebuild" msgstr "Reconstruindo" msgid "Loading current presets" -msgstr "Carregando presets atuais" +msgstr "Carregando predefinições atuais" msgid "Loading a mode view" -msgstr "Carregando uma visualização de modo" +msgstr "Carregando uma vista de modo" -msgid "Choose one file (3mf):" -msgstr "Escolha um arquivo (3mf):" +msgid "Choose one file (3MF):" +msgstr "Escolha um arquivo (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Escolha um ou mais arquivos (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Escolha um ou mais arquivos (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Escolha um ou mais arquivos (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Escolha um ou mais arquivos (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Escolha o arquivo ZIP" -msgid "Choose one file (gcode/3mf):" -msgstr "Escolha um arquivo (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Escolha um arquivo (GCODE/3MF):" msgid "Some presets are modified." -msgstr "Alguns presets foram modificados." +msgstr "Algumas predefinições foram modificadas." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"Você pode manter os modelos modificados no novo projeto, descartar ou salvar " -"as alterações como novos modelos." +"Você pode manter as predefinições modificadas no novo projeto, descartar ou " +"salvar as alterações como novas predefinições." msgid "User logged out" msgstr "Usuário desconectado" @@ -1535,10 +1772,10 @@ msgstr "Abrir Projeto" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" -"A versão do Snapmaker Orca é muito antiga e precisa ser atualizada para a " -"versão mais recente antes de poder ser usada normalmente" +"Esta versão do Snapmaker Orca é muito antiga e precisa ser atualizada para a " +"versão mais recente antes de poder ser usada normalmente." msgid "Privacy Policy Update" msgstr "Atualização da Política de Privacidade" @@ -1547,17 +1784,18 @@ msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." msgstr "" -"O número de presets de usuário em cache na nuvem excedeu o limite superior, " -"os presets de usuário recém-criados só podem ser usados localmente." +"O número de predefinições de usuário em cache na nuvem excedeu o limite " +"superior, as predefinições de usuário recém-criados só podem ser usadas " +"localmente." msgid "Sync user presets" -msgstr "Sincronizar presets do usuário" +msgstr "Sincronizar predefinições de usuário" msgid "Loading user preset" -msgstr "Carregando preset do usuário" +msgstr "Carregando predefinição de usuário" msgid "Switching application language" -msgstr "Alterando o idioma do aplicativo" +msgstr "Alternando o idioma do aplicativo" msgid "Select the language" msgstr "Selecione o idioma" @@ -1606,14 +1844,14 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Falha na inicialização da interface do Snapmaker Orca" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Erro fatal, exceção capturada: %1%" msgid "Quality" msgstr "Qualidade" msgid "Shell" -msgstr "Parede" +msgstr "Casca" msgid "Infill" msgstr "Preenchimento" @@ -1634,19 +1872,25 @@ msgid "Top Solid Layers" msgstr "Camadas Sólidas Superiores" msgid "Top Minimum Shell Thickness" -msgstr "Espessura Mínima da Parede Superior" +msgstr "Espessura Mínima da Casca de Topo" + +msgid "Top Surface Density" +msgstr "Densidade da Superfície Superior" msgid "Bottom Solid Layers" msgstr "Camadas Sólidas Inferiores" msgid "Bottom Minimum Shell Thickness" -msgstr "Espessura Mínima da Parede Inferior" +msgstr "Espessura Mínima da Casca de Base" + +msgid "Bottom Surface Density" +msgstr "Densidade da Superfície Inferior" msgid "Ironing" -msgstr "Passar ferro" +msgstr "Passar a ferro" msgid "Fuzzy Skin" -msgstr "Textura Fuzzy" +msgstr "Textura Difusa" msgid "Extruders" msgstr "Extrusoras" @@ -1658,43 +1902,43 @@ msgid "Wipe options" msgstr "Opções de limpeza" msgid "Bed adhesion" -msgstr "Adesão à Mesa" +msgstr "Adesão à mesa" msgid "Add part" -msgstr "Adicionar Peça" +msgstr "Adicionar peça" msgid "Add negative part" -msgstr "Adicionar Peça Negativa" +msgstr "Adicionar peça negativa" msgid "Add modifier" -msgstr "Adicionar Modificador" +msgstr "Adicionar modificador" msgid "Add support blocker" -msgstr "Adicionar Bloqueador de Suporte" +msgstr "Adicionar bloqueador de suporte" msgid "Add support enforcer" -msgstr "Adicionar Reforço de Suporte" +msgstr "Adicionar reforço de suporte" msgid "Add text" -msgstr "Adicionar Texto" +msgstr "Adicionar texto" msgid "Add negative text" -msgstr "Adicionar Texto Negativo" +msgstr "Adicionar texto negativo" msgid "Add text modifier" -msgstr "Adicionar Modificador de Texto" +msgstr "Adicionar modificador de texto" msgid "Add SVG part" -msgstr "Adicionar Peça SVG" +msgstr "Adicionar peça SVG" msgid "Add negative SVG" -msgstr "Adicionar SVG Negativo" +msgstr "Adicionar SVG negativo" msgid "Add SVG modifier" -msgstr "Adicionar Modificador SVG" +msgstr "Adicionar modificador SVG" msgid "Select settings" -msgstr "Selecionar Configurações" +msgstr "Selecionar configurações" msgid "Hide" msgstr "Ocultar" @@ -1703,13 +1947,16 @@ msgid "Show" msgstr "Mostrar" msgid "Del" -msgstr "Apagar" +msgstr "Del" msgid "Delete the selected object" msgstr "Apagar o objeto selecionado" +msgid "Backspace" +msgstr "Backspace" + msgid "Load..." -msgstr "Carregar..." +msgstr "Carregar…" msgid "Cube" msgstr "Cubo" @@ -1729,6 +1976,9 @@ msgstr "Toro" msgid "Orca Cube" msgstr "Cubo Orca" +msgid "Orca Tolerance Test" +msgstr "Teste de Tolerância Orca" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1739,22 +1989,21 @@ msgid "Voron Cube" msgstr "Cubo Voron" msgid "Stanford Bunny" -msgstr "Stanford Bunny" +msgstr "Coelho de Stanford" msgid "Orca String Hell" msgstr "Orca String Hell" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Este modelo possui texto em alto relevo na superfície superior. Para obter " -"os melhores resultados, é aconselhável definir o 'Limiar de perímetro " -"único'\n" -" (min_width_top_surface)' como 0 para que 'Apenas uma Parede nas Superfícies " +"Este modelo possui texto em alto relevo na superfície superior. Para os " +"melhores resultados, é aconselhável definir o 'Limiar de parede única " +"(min_width_top_surface)' como 0 para que 'Apenas uma Parede nas Superfícies " "Superiores' funcione melhor.\n" "Sim - Alterar essas configurações automaticamente\n" "Não - Não alterar essas configurações para mim" @@ -1763,10 +2012,10 @@ msgid "Text" msgstr "Texto" msgid "Height range Modifier" -msgstr "Modificador em altura" +msgstr "Modificador de intervalo de altura" msgid "Add settings" -msgstr "Adicionar Configurações" +msgstr "Adicionar configurações" msgid "Change type" msgstr "Alterar tipo" @@ -1805,7 +2054,13 @@ msgid "Replace with STL" msgstr "Substituir por STL" msgid "Replace the selected part with new STL" -msgstr "Substituir a peça selecionada por um novo STL" +msgstr "Substituir a peça selecionada por novo STL" + +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "Substituir todas peças selecionadas com STL da pasta" msgid "Change filament" msgstr "Alterar filamento" @@ -1844,16 +2099,16 @@ msgstr "Purgar nos suportes dos objetos" msgid "Edit in Parameter Table" msgstr "Editar na Tabela de Parâmetros" -msgid "Convert from inch" -msgstr "Converter de polegada" +msgid "Convert from inches" +msgstr "Converter de polegadas" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Restaurar para polegadas" -msgid "Convert from meter" -msgstr "Converter de metro" +msgid "Convert from meters" +msgstr "Converter de metros" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Restaurar para metros" msgid "Assemble" @@ -1866,10 +2121,10 @@ msgid "Assemble the selected objects to an object with single part" msgstr "Montar os objetos selecionados em um objeto com uma única peça" msgid "Mesh boolean" -msgstr "Operações booleanas" +msgstr "Malha booleana" msgid "Mesh boolean operations including union and subtraction" -msgstr "Operações booleanas incluindo união e subtração" +msgstr "Operações booleanas de malha, incluindo união e subtração" msgid "Along X axis" msgstr "Ao longo do eixo X" @@ -1896,13 +2151,13 @@ msgid "Edit text" msgstr "Editar Texto" msgid "Ability to change text, font, size, ..." -msgstr "Capacidade de alterar texto, fonte, tamanho, ..." +msgstr "Capacidade de alterar texto, fonte, tamanho, …" msgid "Edit SVG" msgstr "Editar SVG" msgid "Change SVG source file, projection, size, ..." -msgstr "Alterar arquivo fonte SVG, projeção, tamanho, ..." +msgstr "Alterar arquivo fonte SVG, projeção, tamanho, …" msgid "Invalidate cut info" msgstr "Invalidar informações de corte" @@ -1920,13 +2175,13 @@ msgid "Show Labels" msgstr "Mostrar Etiquetas" msgid "To objects" -msgstr "Para Objetos" +msgstr "Para objetos" msgid "Split the selected object into multiple objects" msgstr "Dividir o objeto selecionado em vários objetos" msgid "To parts" -msgstr "Para Peças" +msgstr "Para peças" msgid "Split the selected object into multiple parts" msgstr "Dividir o objeto selecionado em várias peças" @@ -1938,47 +2193,81 @@ msgid "Split the selected object" msgstr "Dividir o objeto selecionado" msgid "Auto orientation" -msgstr "Orientação Automática" +msgstr "Orientação automática" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "" -"Orientar automaticamente o objeto para melhorar a qualidade de impressão." +"Orientar automaticamente o objeto para melhorar a qualidade de impressão" + +msgid "Edit" +msgstr "Editar" + +msgid "Delete this filament" +msgstr "Apagar este filamento" + +msgid "Merge with" +msgstr "Mesclar com" msgid "Select All" msgstr "Selecionar Tudo" msgid "select all objects on current plate" -msgstr "selecionar todos os objetos na mesa atual" +msgstr "selecionar todos os objetos na placa atual" msgid "Delete All" msgstr "Apagar Tudo" msgid "delete all objects on current plate" -msgstr "apagar todos os objetos na mesa atual" +msgstr "apagar todos os objetos na placa atual" msgid "Arrange" msgstr "Organizar" msgid "arrange current plate" -msgstr "organizar mesa atual" +msgstr "organizar placa atual" msgid "Reload All" msgstr "Recarregar Tudo" msgid "reload all from disk" -msgstr "Recarregar tudo do disco" +msgstr "recarregar tudo do disco" msgid "Auto Rotate" -msgstr "Auto-orientação" +msgstr "Auto Rotação" msgid "auto rotate current plate" -msgstr "girar automaticamente a mesa atual" +msgstr "rotacionar automaticamente a placa atual" msgid "Delete Plate" -msgstr "Apagar Mesa" +msgstr "Apagar Placa" msgid "Remove the selected plate" -msgstr "Remover a mesa selecionada" +msgstr "Remover a placa selecionada" + +msgid "Add instance" +msgstr "Adicionar instância" + +msgid "Add one more instance of the selected object" +msgstr "Adicionar uma ou mais instâncias do objeto selecionado" + +msgid "Remove instance" +msgstr "Remover instância" + +msgid "Remove one instance of the selected object" +msgstr "Remover uma instância do objeto selecionado" + +msgid "Set number of instances" +msgstr "Definir o número de instâncias" + +msgid "Change the number of instances of the selected object" +msgstr "Alterar o número de instâncias do objeto selecionado" + +msgid "Fill bed with instances" +msgstr "Preencher a placa com instâncias" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "Preencher a área remanescente da placa com instâncias do objeto " +"selecionado" msgid "Clone" msgstr "Clonar" @@ -1989,9 +2278,18 @@ msgstr "Simplificar Modelo" msgid "Center" msgstr "Centralizar" +msgid "Drop" +msgstr "Descartar" + msgid "Edit Process Settings" msgstr "Editar Configurações de Processo" +msgid "Copy Process Settings" +msgstr "Copiar Configurações de Processo" + +msgid "Paste Process Settings" +msgstr "Colar Configurações de Processo" + msgid "Edit print parameters for a single object" msgstr "Editar parâmetros de impressão para um único objeto" @@ -2008,7 +2306,7 @@ msgid "Lock" msgstr "Bloquear" msgid "Edit Plate Name" -msgstr "Editar Nome da Mesa" +msgstr "Editar Nome da Placa" msgid "Name" msgstr "Nome" @@ -2037,8 +2335,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d aresta não-manifold" msgstr[1] "%1$d arestas não-manifold" -msgid "Right click the icon to fix model object" -msgstr "Clique com o botão direito no ícone para corrigir o objeto do modelo" +msgid "Click the icon to repair model object" +msgstr "Clique no ícone para consertar o objeto modelo" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2062,7 +2360,7 @@ msgid "Click the icon to edit color painting of the object" msgstr "Clique no ícone para editar a pintura de cor do objeto" msgid "Click the icon to shift this object to the bed" -msgstr "Clique no ícone para mover este objeto para a base" +msgstr "Clique no ícone para mover este objeto para a mesa" msgid "Loading file" msgstr "Carregando arquivo" @@ -2089,6 +2387,9 @@ msgstr "" "Mude para o modo de configuração por objeto para editar processos dos " "objetos selecionados." +msgid "Remove paint-on fuzzy skin" +msgstr "Remover textura difusa pintada" + msgid "Delete connector from object which is a part of cut" msgstr "Excluir conector do objeto que é parte do corte" @@ -2107,10 +2408,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Esta ação irá quebrar a correspondência de corte.\n" "Depois disso, a consistência do modelo não pode ser garantida.\n" @@ -2124,7 +2425,7 @@ msgstr "Excluir todos os conectores" msgid "Deleting the last solid part is not allowed." msgstr "Não é permitido excluir a última peça sólida." -msgid "The target object contains only one part and can not be splited." +msgid "The target object contains only one part and can not be split." msgstr "O objeto de destino contém apenas uma peça e não pode ser dividido." msgid "Assembly" @@ -2167,14 +2468,14 @@ msgid "Selection conflicts" msgstr "Conflitos de seleção" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Se o primeiro item selecionado for um objeto, o segundo também deve ser um " "objeto." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Se o primeiro item selecionado for uma peça, o segundo deve ser uma peça no " "mesmo objeto." @@ -2205,19 +2506,19 @@ msgstr "Renomeando" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "O seguinte objeto do modelo foi reparado" -msgstr[1] "Os seguintes objetos do modelo foram reparados" +msgstr[0] "O seguinte objeto modelo foi reparado" +msgstr[1] "Os seguintes objetos modelo foram reparados" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "Falha ao reparar o seguinte objeto do modelo" -msgstr[1] "Falha ao reparar os seguintes objetos do modelo" +msgstr[0] "Falha ao reparar o seguinte objeto modelo" +msgstr[1] "Falha ao reparar os seguintes objetos modelo" msgid "Repairing was canceled" msgstr "A reparação foi cancelada" msgid "Additional process preset" -msgstr "Preset de processo adicional" +msgstr "Predefinição de processo adicional" msgid "Remove parameter" msgstr "Remover parâmetro" @@ -2238,8 +2539,8 @@ msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" "uma célula só pode ser copiada para uma ou várias células na mesma coluna" -msgid "multiple cells copy is not supported" -msgstr "a cópia de múltiplas células não é suportada" +msgid "Copying multiple cells is not supported." +msgstr "A cópia de múltiplas células não é suportada." msgid "Outside" msgstr "Fora da Mesa" @@ -2248,7 +2549,7 @@ msgid "Layer height" msgstr "Altura da camada" msgid "Wall loops" -msgstr "Perímetros" +msgstr "Voltas da parede" msgid "Infill density(%)" msgstr "Densidade do preenchimento(%)" @@ -2259,6 +2560,9 @@ msgstr "Borda automática" msgid "Mouse ear" msgstr "Orelha de rato" +msgid "Painted" +msgstr "Pintado" + msgid "Outer brim only" msgstr "Somente borda externa" @@ -2272,10 +2576,10 @@ msgid "No-brim" msgstr "Sem borda" msgid "Outer wall speed" -msgstr "Velocidade do perímetro externo" +msgstr "Velocidade da parede externa" msgid "Plate" -msgstr "Mesa" +msgstr "Placa" msgid "Brim" msgstr "Borda" @@ -2311,7 +2615,7 @@ msgid "Pause" msgstr "Pausa" msgid "Template" -msgstr "Modelo" +msgstr "Gabarito" msgid "Custom" msgstr "Personalizado" @@ -2320,13 +2624,13 @@ msgid "Pause:" msgstr "Pausa:" msgid "Custom Template:" -msgstr "Modelo Personalizado:" +msgstr "Gabarito Personalizado:" msgid "Custom G-code:" -msgstr "G-Code Personalizado:" +msgstr "G-code Personalizado:" msgid "Custom G-code" -msgstr "G-Code Personalizado" +msgstr "G-code Personalizado" msgid "Enter Custom G-code used on current layer:" msgstr "Insira o G-code personalizado usado na camada atual:" @@ -2344,16 +2648,16 @@ msgid "Insert a pause command at the beginning of this layer." msgstr "Inserir um comando de pausa no início desta camada." msgid "Add Custom G-code" -msgstr "Adicionar G-Code Personalizado" +msgstr "Adicionar G-code Personalizado" msgid "Insert custom G-code at the beginning of this layer." -msgstr "Inserir G-Code personalizado no início desta camada." +msgstr "Inserir G-code personalizado no início desta camada." msgid "Add Custom Template" -msgstr "Adicionar Modelo Personalizado" +msgstr "Adicionar Gabarito Personalizado" msgid "Insert template custom G-code at the beginning of this layer." -msgstr "Inserir modelo de G-Code personalizado no início desta camada." +msgstr "Inserir gabarito de G-code personalizado no início desta camada." msgid "Filament " msgstr "Filamento " @@ -2365,13 +2669,13 @@ msgid "Delete Pause" msgstr "Excluir Pausa" msgid "Delete Custom Template" -msgstr "Excluir Modelo Personalizado" +msgstr "Excluir Gabarito Personalizado" msgid "Edit Custom G-code" -msgstr "Editar G-Code Personalizado" +msgstr "Editar G-code Personalizado" msgid "Delete Custom G-code" -msgstr "Excluir G-Code Personalizado" +msgstr "Excluir G-code Personalizado" msgid "Delete Filament Change" msgstr "Excluir Troca de Filamento" @@ -2380,7 +2684,7 @@ msgid "No printer" msgstr "Sem impressora" msgid "..." -msgstr "..." +msgstr "…" msgid "Failed to connect to the server" msgstr "Falha ao conectar ao servidor" @@ -2395,8 +2699,7 @@ msgid "Failed to connect to cloud service" msgstr "Falha ao conectar ao serviço de nuvem" msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "" -"Por favor, clique no link acima para visualizar o status do serviço de nuvem" +msgstr "Por favor, clique no link acima para ver o status do serviço de nuvem" msgid "Failed to connect to the printer" msgstr "Falha ao conectar à impressora" @@ -2408,25 +2711,10 @@ msgid "Please check the network connection of the printer and Orca." msgstr "Por favor, verifique a conexão de rede da impressora e do Orca." msgid "Connecting..." -msgstr "Conectando..." +msgstr "Conectando…" -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Vazio" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Recarga Automática" - -msgid "AMS not connected" -msgstr "AMS não conectado" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Carregar" @@ -2434,32 +2722,147 @@ msgstr "Carregar" msgid "Unload" msgstr "Descarregar" -msgid "Ext Spool" -msgstr "Carretel Ext." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "" +"Escolha um espaço do AMS e pressione o botão \"Carregar\" ou \"Descarregar\" " +"para carregar ou descarregar automaticamente o filamento." -msgid "Tips" -msgstr "Dicas" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" +"O tipo de filamento necessário para realizar esta ação é desconhecido. " +"Insira as informações do filamento desejado." -msgid "Guide" -msgstr "Guia" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" +"Mudar a velocidade do ventilador durante a impressão pode afetar a qualidade " +"da impressão. Escolha com cuidado." -msgid "Retry" -msgstr "Tentar Novamente" +msgid "Change Anyway" +msgstr "Mudar Mesmo Assim" -msgid "Calibrating AMS..." -msgstr "Calibrando AMS..." +msgid "Off" +msgstr "Desligado" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "Ocorreu um problema durante a calibração. Clique para ver a solução." +msgid "Filter" +msgstr "Filtrar" -msgid "Calibrate again" -msgstr "Calibrar novamente" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" +"Ativar a filtragem redireciona o ventilador direito para filtrar o gás, o " +"que pode reduzir o desempenho de resfriamento." -msgid "Cancel calibration" -msgstr "Cancelar calibração" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" +"Habilitar a filtragem durante a impressão pode reduzir o resfriamento e " +"afetar a qualidade da impressão. Escolha com cuidado." + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" +"O material selecionado suporta apenas o modo de ventilação atual e não pode " +"ser alterado durante a impressão." + +msgid "Cooling" +msgstr "Resfriamento" + +msgid "Heating" +msgstr "Aquecimento" + +msgid "Exhaust" +msgstr "Exaustão" + +msgid "Full Cooling" +msgstr "Resfriamento Completo" + +msgid "Init" +msgstr "Inicialização" + +msgid "Chamber" +msgstr "Câmara" + +msgid "Innerloop" +msgstr "Circuito Interno" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Topo" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" +"O ventilador controla a temperatura durante a impressão para melhorar a " +"qualidade da impressão. O sistema ajusta automaticamente a ativação e a " +"velocidade do ventilador de acordo com os diferentes materiais de impressão." + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" +"O modo de resfriamento é adequado para impressão com materiais PLA/PETG/TPU " +"e filtra o ar da câmara." + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" +"O modo de aquecimento é adequado para impressão com materiais ABS/ASA/PC/PA " +"e filtra a circulação do ar na câmara." + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" +"O modo de resfriamento intenso é adequado para impressão com materiais " +"PLA/TPU. Nesse modo, as peças impressas serão completamente resfriadas." + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "O modo de resfriamento é adequado para impressão com materiais " +"PLA/PETG/TPU." + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "Direita(Aux)" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "Direita(Filtro)" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "Peças" + +msgid "Aux" +msgstr "Auxiliar" + +msgid "Nozzle1" +msgstr "Bico1" + +msgid "MC Board" +msgstr "Placa MC" + +msgid "Heat" +msgstr "Calor" + +msgid "Fan" +msgstr "Ventoinha" msgid "Idling..." -msgstr "Em espera..." +msgstr "Em espera…" msgid "Heat the nozzle" msgstr "Aquecer o bico" @@ -2473,50 +2876,43 @@ msgstr "Retirar o filamento atual" msgid "Push new filament into extruder" msgstr "Inserir novo filamento na extrusora" +msgid "Grab new filament" +msgstr "Pegar novo filamento" + msgid "Purge old filament" msgstr "Purgar filamento antigo" -msgid "Feed Filament" -msgstr "Alimentar Filamento" - msgid "Confirm extruded" msgstr "Confirmar extrusão" msgid "Check filament location" msgstr "Verificar localização do filamento" -msgid "Grab new filament" -msgstr "Pegar novo filamento" +msgid "The maximum temperature cannot exceed " +msgstr "A temperatura máxima não pode exceder " + +msgid "The minmum temperature should not be less than " +msgstr "A temperatura mínima não pode ser menor do que " msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" -"Escolha um slot AMS e pressione o botão \"Carregar\" ou \"Descarregar\" para " -"carregar ou descarregar automaticamente o filamento." +"Todos os objetos selecionados estão na placa travada.\n" +"Não é possível auto-arranjar esses objetos." -msgid "Edit" -msgstr "Editar" +msgid "No arrangeable objects are selected." +msgstr "Nenhum objeto arranjável está selecionado." msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" -"Todos os objetos selecionados estão na mesa bloqueada,\n" -"Não podemos fazer o auto-posicionamento nesses objetos." - -msgid "No arrangable objects are selected." -msgstr "Nenhum objeto disponível para posicionamento foi selecionado." - -msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." -msgstr "" -"Esta mesa está bloqueada,\n" -"Não podemos fazer o auto-posicionamento nesta mesa." +"Essa placa está travada.\n" +"Não é possível auto-arranjar nessa placa." msgid "Arranging..." -msgstr "Organizando..." +msgstr "Organizando…" msgid "Arranging" msgstr "Organizando" @@ -2550,21 +2946,21 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" -"Todos os objetos selecionados estão na mesa bloqueada,\n" -"Não podemos fazer a auto-orientação nesses objetos." +"Todos os objetos selecionados estão na placa travada.\n" +"Não é possível auto-orientar esses objetos." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" -"Esta mesa está bloqueada,\n" -"Não podemos fazer a auto-orientação nesta mesa." +"Essa placa está travada.\n" +"Não é possível auto-orientar nessa placa." msgid "Orienting..." -msgstr "Orientando..." +msgstr "Orientando…" msgid "Orienting" msgstr "Orientando" @@ -2582,7 +2978,7 @@ msgid "Bed filling done." msgstr "Preenchimento da mesa concluído." msgid "Searching for optimal orientation" -msgstr "Buscando melhor orientação" +msgstr "Buscando orientação ideal" msgid "Orientation search canceled." msgstr "Busca de orientação cancelada." @@ -2613,7 +3009,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Falha na conexão com o serviço de nuvem. Por favor, tente novamente." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Arquivo de impressão não encontrado. Por favor, fatie novamente." msgid "" @@ -2640,7 +3036,7 @@ msgstr "" "O tamanho do arquivo de impressão é muito grande. Por favor, ajuste o " "tamanho do arquivo e tente novamente." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Arquivo de impressão não encontrado. Por favor, fatie-o novamente e envie " "para impressão." @@ -2681,21 +3077,73 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Enviado com sucesso. Irá saltar automaticamente para a próxima página em %ss" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Um cartão SD precisa ser inserido antes de imprimir via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Código de acesso:%s Endereço IP:%s" -msgid "Sending gcode file over LAN" -msgstr "Enviando arquivo de G-Code via LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" +"É necessário inserir um dispositivo de armazenamento antes de imprimir via " +"LAN." -msgid "Sending gcode file to sdcard" -msgstr "Enviando arquivo de G-Code para o cartão SD" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" +"O trabalho de impressão está sendo enviado pela LAN, mas o Armazenamento na " +"impressora está anormal e isso pode causar problemas de impressão." + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" +"O Armazenamento na impressora está com anormal. Substitua-o por um " +"Armazenamento normal antes de enviar o trabalho de impressão." + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" +"O Armazenamento na impressora é somente para leitura. Substitua-o por um " +"Armazenamento normal antes de enviar o trabalho de impressão." + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" +"Ocorreu um erro desconhecido no estadu do Armazenamento. Tente novamente." + +msgid "Sending G-code file over LAN" +msgstr "Enviando arquivo de G-code via LAN" + +msgid "Sending G-code file to SD card" +msgstr "Enviando arquivo de G-code para o cartão SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Enviado com sucesso. Feche a página atual em %s s" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Um cartão SD precisa ser inserido antes de enviar para a impressora." +msgid "Storage needs to be inserted before sending to printer." +msgstr "É necessário inserir Armazenamento antes de enviar para a impressora." + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" +"O arquivo G-code está sendo enviado pela LAN, mas o Armazenamento na " +"impressora está anormal e pode causar falhas na impressão." + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" +"O Armazenamento na impressora está anormal. Substitua-o por um Armazenamento " +"normal antes de enviar para a impressora." + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" +"O Armazenamento na impressora é somente para leitura. Substitua-o por um " +"Armazenamento normal antes de enviar para a impressora." msgid "Importing SLA archive" msgstr "Importando arquivo SLA" @@ -2704,8 +3152,8 @@ msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"O arquivo SLA não contém nenhum perfil. Por favor, ative alguns perfis de " -"impressora SLA antes de importar esse arquivo SLA." +"O arquivo SLA não contém nenhuma predefinição. Por favor, ative algumas " +"predefinições de impressora SLA antes de importar esse arquivo SLA." msgid "Importing canceled." msgstr "Importação cancelada." @@ -2717,17 +3165,16 @@ msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" -"O arquivo SLA importado não contém nenhum perfil. Os perfis SLA atuais foram " -"usados como alternativa." +"O arquivo SLA importado não contém nenhuma predefinição. As predefinições " +"SLA atuais foram usadas como alternativa." msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" -"Você não pode carregar um projeto SLA com um objeto de várias peças na mesa" +"Você não pode carregar um projeto SLA com um objeto muilti-peças na mesa" msgid "Please check your object list before preset changing." msgstr "" -"Por favor, verifique sua lista de objetos antes de mudar a configuração " -"predefinida." +"Por favor, verifique sua lista de objetos antes de mudar a predefinição." msgid "Attention!" msgstr "Atenção!" @@ -2736,13 +3183,13 @@ msgid "Downloading" msgstr "Baixando" msgid "Download failed" -msgstr "Falha no download" +msgstr "Falha ao baixar" -msgid "Cancelled" +msgid "Canceled" msgstr "Cancelado" -msgid "Install successfully." -msgstr "Instalação concluída com sucesso." +msgid "Installed successfully" +msgstr "Instalação concluída com sucesso" msgid "Installing" msgstr "Instalando" @@ -2765,8 +3212,8 @@ msgstr "O Snapmaker Orca é licenciado sob " msgid "GNU Affero General Public License, version 3" msgstr "Licença Pública Geral Affero GNU, versão 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "O Snapmaker Orca é baseado no PrusaSlicer e Bambu Studio" msgid "Libraries" msgstr "Bibliotecas" @@ -2782,14 +3229,12 @@ msgstr "" msgid "About %s" msgstr "Sobre %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "Snapmaker Orca é baseado no BambuStudio, PrusaSlicer e SuperSlicer." +msgstr "Snapmaker Orca é baseado no Bambu Studio, PrusaSlicer e SuperSlicer." msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "BambuStudio é originalmente baseado no PrusaSlicer pela PrusaResearch." +msgstr "" +"Bambu Studio é originalmente baseado no PrusaSlicer pela PrusaResearch." msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." msgstr "" @@ -2814,21 +3259,18 @@ msgstr "Confirmar" msgid "Close" msgstr "Fechar" -msgid "Colour" -msgstr "Cor" - msgid "" "Nozzle\n" "Temperature" msgstr "" -"Bico\n" -"Temperatura" +"Temperatura\n" +"do Bico" msgid "max" msgstr "máx" msgid "min" -msgstr "min." +msgstr "mín" #, boost-format msgid "The input value should be greater than %1% and less than %2%" @@ -2837,11 +3279,6 @@ msgstr "O valor de entrada deve ser maior que %1% e menor que %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "" -"A configuração das informações do slot AMS durante a impressão não é " -"suportada" - msgid "Factors of Flow Dynamics Calibration" msgstr "Fatores de Calibração de Dinâmica de Fluxo" @@ -2854,9 +3291,14 @@ msgstr "Fator K" msgid "Factor N" msgstr "Fator N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "" +"A configuração das informações do espaço do AMS durante a impressão não é " +"suportada" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" -"A configuração de informações do slot virtual durante a impressão não é " +"A configuração de informações do espaço virtual durante a impressão não é " "suportada" msgid "Are you sure you want to clear the filament information?" @@ -2867,11 +3309,24 @@ msgstr "Você precisa selecionar o tipo e a cor do material primeiro." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "" +msgstr "Por favor insira um valor válido (K entre %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +"Por favor insira um valor válido (K entre %.1f~%.1f, N entre %.1f~%.1f)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" +"O fluxo do bico não está configurado. Defina o fluxo do bico antes de editar " +"o filamento.\n" +"'Dispositivo -> Imprimir peças'" + +msgid "AMS" +msgstr "AMS" msgid "Other Color" msgstr "Outra Cor" @@ -2889,13 +3344,13 @@ msgid "" msgstr "" "A temperatura do bico e a fluxo volumétrico máximo afetarão os resultados da " "calibração. Preencha os mesmos valores que a impressão atual. Eles podem ser " -"preenchidos automaticamente selecionando um perfil de filamento." +"preenchidos automaticamente selecionando uma predefinição de filamento." msgid "Nozzle Diameter" msgstr "Diâmetro do bico" msgid "Bed Type" -msgstr "Tipo de Mesa" +msgstr "Tipo de Placa" msgid "Nozzle temperature" msgstr "Temperatura do bico" @@ -2906,15 +3361,9 @@ msgstr "Temperatura da Mesa" msgid "Max volumetric speed" msgstr "Fluxo volumétrico máximo" -msgid "℃" -msgstr "°C" - msgid "Bed temperature" msgstr "Temperatura da mesa" -msgid "mm³" -msgstr "mm3" - msgid "Start calibration" msgstr "Iniciar calibração" @@ -2956,14 +3405,84 @@ msgstr "Calibração de Fluxo Dinâmico" msgid "Step" msgstr "Passo" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "Espaços do AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "Escolha entre os seguintes filamentos" + +msgid "Select filament that installed to the left nozzle" +msgstr "Selecione o filamento instalado no bico esquerdo" + +msgid "Select filament that installed to the right nozzle" +msgstr "Selecione o filamento instalado no bico direito" + +msgid "Left AMS" +msgstr "AMS Esquerdo" + +msgid "External" +msgstr "Externo" + +msgid "Reset current filament mapping" +msgstr "Redefinir mapeamento atual de filamento" + +msgid "Right AMS" +msgstr "AMS Direito" + +msgid "Left Nozzle" +msgstr "Bico Esquerdo" + +msgid "Right Nozzle" +msgstr "Bico Direito" + +msgid "Nozzle" +msgstr "Bico" + +msgid "Ext" msgstr "" -"Nota: Apenas os espaços do AMS carregados com o mesmo tipo de material podem " -"ser selecionadas." + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" +"Nota: o tipo de filamento (%s) não corresponde ao tipo de filamento (%s) no " +"arquivo de fatiamento. Se você quiser usar este slot, pode instalar %s em vez " +"de %s e alterar as informações do slot na página 'Dispositivo'." + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" +"Nota: o slot está vazio ou indefinido. Se desejar usar este slot, você pode " +"instalar %s e alterar as informações do slot na página 'Dispositivo'." + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "Nota: Apenas espaços com filamento carregado podem ser selecionados." msgid "Enable AMS" msgstr "Ativar AMS" @@ -2977,25 +3496,22 @@ msgstr "Desativar AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Imprimir com o filamento montado na parte de trás do chassi" -msgid "Current Cabin humidity" -msgstr "Umidade da cabine atual" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Por favor, mude o dessecante quando estiver muito molhado. O indicador pode " "não representar com precisão nos casos a seguir: quando a tampa está aberta " -"ou quando o dessecante é trocado. Leva horas para absorver a umidade, baixas " -"temperaturas também atrasam o processo." +"ou quando o dessecante é trocado. Leva algumas horas para absorver a " +"umidade, e baixas temperaturas também atrasam o processo." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" -"Configure qual espaço do AMS deve ser usado para um filamento usado no " -"trabalho de impressão" +"Configura qual espaço do AMS deve ser usado para um filamento usado no " +"trabalho de impressão." msgid "Filament used in this print job" msgstr "Filamento usado neste trabalho de impressão" @@ -3012,12 +3528,21 @@ msgstr "Não ativar AMS" msgid "Print using materials mounted on the back of the case" msgstr "Imprimir usando materiais montados na parte de trás da caixa" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Imprimir com filamentos no AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Imprimir com filamentos montados na parte de trás do chassi" +msgid "Auto Refill" +msgstr "Recarga Automática" + +msgid "Left" +msgstr "Esquerda" + +msgid "Right" +msgstr "Direita" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3025,34 +3550,42 @@ msgstr "" "Quando o material atual acabar, a impressora continuará a imprimir na " "seguinte ordem." +msgid "Identical filament: same brand, type and color" +msgstr "Filamento idêntico: mesma marca, tipo e cor" + msgid "Group" msgstr "Grupo" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" +"Quando o material atual acabar, a impressora usará um filamento idêntico " +"para continuar a impressão." + msgid "The printer does not currently support auto refill." msgstr "A impressora atualmente não suporta recarga automática." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"O backup de filamento do AMS não está ativado, por favor, ative-o nas " +"O backup de filamento do AMS não está ativado, por favor ative-o nas " "configurações do AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Se houver dois filamentos idênticos no AMS, o backup de filamento do AMS " -"será ativado. \n" -"(Funciona atualmente com recarga automática de filamentos da mesma marca, " -"tipo de material e cor)" +"Quando o filamento atual acabar, a impressora usará um filamento idêntico " +"para continuar a impressão.\n" +"*Filamento idêntico: mesma marca, tipo e cor." msgid "DRY" msgstr "SECO" msgid "WET" -msgstr "MOLHADO" +msgstr "UMIDO" msgid "AMS Settings" msgstr "Configurações do AMS" @@ -3068,7 +3601,7 @@ msgstr "" "filamento da Bambu Lab. Isso leva cerca de 20 segundos." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Nota: se um novo filamento for inserido durante a impressão, o AMS não irá " @@ -3086,8 +3619,8 @@ msgstr "Atualização de inicialização" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "O AMS irá ler automaticamente as informações do filamento inserido na " "inicialização. Levará cerca de 1 minuto. O processo de leitura irá girar as " @@ -3106,23 +3639,20 @@ msgid "Update remaining capacity" msgstr "Atualizar capacidade restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"O AMS irá estimar a capacidade restante do filamento Bambu após as " -"informações do filamento serem atualizadas. Durante a impressão, a " -"capacidade restante será atualizada automaticamente." +"O AMS tentará estimar a capacidade restante dos filamentos Bambu Lab." msgid "AMS filament backup" msgstr "Backup de filamento do AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" -"O AMS continuará para outra bobina com as mesmas propriedades do filamento " -"automaticamente quando o filamento atual acabar" +"O AMS continuará automaticamente para outra bobina com propriedades de " +"filamento equivalentes quando o filamento atual acabar." msgid "Air Printing Detection" msgstr "Detecção de Impressão Aérea" @@ -3177,11 +3707,15 @@ msgstr "" "Ocorreu um erro. Talvez a memória do sistema não seja suficiente ou seja um " "bug do programa" -msgid "Please save project and restart the program. " -msgstr "Por favor, salve o projeto e reinicie o programa. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Ocorreu um erro fatal: \"%1%\"" -msgid "Processing G-Code from Previous file..." -msgstr "Processando G-Code do arquivo anterior..." +msgid "Please save project and restart the program." +msgstr "Por favor, salve o projeto e reinicie o programa." + +msgid "Processing G-code from Previous file..." +msgstr "Processando G-code do arquivo anterior…" msgid "Slicing complete" msgstr "Fatiamento concluído" @@ -3213,7 +3747,7 @@ msgstr "Executando scripts de pós-processamento" msgid "Successfully executed post-processing script" msgstr "Script de pós-processamento executado com êxito" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Ocorreu um erro desconhecido ao exportar G-code." #, boost-format @@ -3223,7 +3757,7 @@ msgid "" "Error message: %1%" msgstr "" "A cópia do G-code temporário para o G-code de saída falhou. Talvez o cartão " -"SD esteja bloqueado?\n" +"SD esteja travado pra escrita?\n" "Mensagem de erro: %1%" #, boost-format @@ -3233,8 +3767,8 @@ msgid "" "device. The corrupted output G-code is at %1%.tmp." msgstr "" "A cópia do G-code temporário para o G-code de saída falhou. Pode haver " -"problema com o dispositivo de destino, por favor, tente exportar novamente " -"ou usar outro dispositivo. O G-code de saída corrompido está em %1%.tmp." +"problema com o dispositivo de destino, por favor tente exportar novamente ou " +"usar outro dispositivo. O G-code de saída corrompido está em %1%.tmp." #, boost-format msgid "" @@ -3265,21 +3799,21 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Arquivo G-code exportado para %1%" -msgid "Unknown error when export G-code." -msgstr "Erro desconhecido ao exportar G-Code." +msgid "Unknown error when exporting G-code." +msgstr "Erro desconhecido ao exportar G-code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"Falha ao salvar arquivo de G-Code.\n" +"Falha ao salvar arquivo de G-code.\n" "Mensagem de erro: %1%.\n" "Arquivo de origem %2%." msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Cópia do G-Code temporário para o G-Code de saída falhou" +msgstr "Cópia do G-code temporário para o G-code de saída falhou" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" @@ -3287,239 +3821,17 @@ msgstr "" "Agendando o envio para `%1%`. Veja Janela -> Fila de Envio do Anfitrião de " "Impressão" -msgid "Device" -msgstr "Dispositivo" - -msgid "Task Sending" -msgstr "Envio de tarefa" - -msgid "Task Sent" -msgstr "Tarefa Enviada" - -msgid "Edit multiple printers" -msgstr "Editar múltiplas impressoras" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "O número máximo de impressoras que podem ser selecionadas é %d" - -msgid "Offline" -msgstr "Desconectado" - -msgid "No task" -msgstr "Nenhuma tarefa" - -msgid "View" -msgstr "Visualizar" - -msgid "N/A" -msgstr "N/D" - -msgid "Edit Printers" -msgstr "Editar impressoras" - -msgid "Device Name" -msgstr "Nome do Dispositivo" - -msgid "Task Name" -msgstr "Nome da tarefa" - -msgid "Device Status" -msgstr "Status do dispositivo" - -msgid "Actions" -msgstr "Ações" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Por favor, selecione os dispositivos que você gostaria de gerenciar aqui " -"(até 6 dispositivos)" - -msgid "Add" -msgstr "Adicionar" - -msgid "Idle" -msgstr "Inativo" - -msgid "Printing" -msgstr "Imprimindo" - -msgid "Upgrading" -msgstr "Atualizando" - -msgid "Incompatible" -msgstr "Incompatível" - -msgid "syncing" -msgstr "sincronizando" - -msgid "Printing Finish" -msgstr "Impressão finalizada" - -msgid "Printing Failed" -msgstr "Falha na Impressão" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Preparar" - -msgid "Slicing" -msgstr "Fatiando" - -msgid "Pending" -msgstr "Pendente" - -msgid "Sending" -msgstr "Enviando" - -msgid "Sending Finish" -msgstr "Envio Finalizado" - -msgid "Sending Cancel" -msgstr "Cancelar Envio" - -msgid "Sending Failed" -msgstr "Falha no Envio" - -msgid "Print Success" -msgstr "Impressão Bem Sucedida" - -msgid "Print Failed" -msgstr "Impressão Falhou" - -msgid "Removed" -msgstr "Removido" - -msgid "Resume" -msgstr "Continuar" - -msgid "Stop" -msgstr "Parar" - -msgid "Task Status" -msgstr "Status da tarefa" - -msgid "Sent Time" -msgstr "Tempo de envio" - -msgid "There are no tasks to be sent!" -msgstr "Não há tarefas a enviar!" - -msgid "No historical tasks!" -msgstr "Nenhuma tarefa no histórico!" - -msgid "Loading..." -msgstr "Carregando..." - -msgid "No AMS" -msgstr "Nenhum AMS" - -msgid "Send to Multi-device" -msgstr "Enviar para multi-dispositivo" - -msgid "Preparing print job" -msgstr "Preparando trabalho de impressão" - -msgid "Abnormal print file data. Please slice again" -msgstr "Dados de arquivo de impressão anormais. Por favor, fatie novamente" - -msgid "There is no device available to send printing." -msgstr "Não há nenhum dispositivo disponível para enviar impressão." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "O número de impressoras em uso simultaneamente não pode ser igual a 0." - -msgid "Use External Spool" -msgstr "Usar Carretel Externo" - -msgid "Use AMS" -msgstr "Usar AMS" - -msgid "Select Printers" -msgstr "Selecionar impressoras" - -msgid "Ams Status" -msgstr "Status do AMS" - -msgid "Printing Options" -msgstr "Opções de Impressão" - -msgid "Bed Leveling" -msgstr "Nivelamento da mesa" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "Calibração de Fluxo Dinâmico" - -msgid "Send Options" -msgstr "Opções de envio" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"impressoras ao mesmo tempo. (Depende de quantos dispositivos podem ser " -"submetidos ao mesmo tempo.)" - -msgid "Wait" -msgstr "Aguarde" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minuto por cada lote.(Depende de quanto tempo leva para completar o " -"aquecimento.)" - -msgid "Send" -msgstr "Enviar" - -msgid "Name is invalid;" -msgstr "O nome é inválido;" - -msgid "illegal characters:" -msgstr "caracteres ilegais:" - -msgid "illegal suffix:" -msgstr "sufixo ilegal:" - -msgid "The name is not allowed to be empty." -msgstr "O nome não pode ficar vazio." - -msgid "The name is not allowed to start with space character." -msgstr "O nome não pode começar com um espaço." - -msgid "The name is not allowed to end with space character." -msgstr "O nome não pode terminar com um espaço." - -msgid "The name length exceeds the limit." -msgstr "O comprimento do nome excede o limite." - msgid "Origin" msgstr "Origem" msgid "Size in X and Y of the rectangular plate." -msgstr "Tamanho em X e Y da mesa retangular." +msgstr "Tamanho em X e Y da placa retangular." msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" -"Distância da coordenada do G-Code 0,0 do canto frontal esquerdo do retângulo." +"Distância da coordenada do G-code 0,0 do canto frontal esquerdo do retângulo." msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " @@ -3535,7 +3847,7 @@ msgid "Circular" msgstr "Circular" msgid "Load shape from STL..." -msgstr "Carregar forma de STL..." +msgstr "Carregar forma de STL …" msgid "Settings" msgstr "Configurações" @@ -3578,12 +3890,13 @@ msgstr "Escolha um arquivo STL para importar o modelo da mesa:" msgid "Bed Shape" msgstr "Forma da Mesa" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" -msgstr "" -"A temperatura mínima recomendada é inferior a 190 graus ou a temperatura " -"máxima recomendada é superior a 300 graus.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "Recomenda-se uma temperatura mínima acima de %d℃ para %s.\n" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" +msgstr "Recomenda-se uma temperatura máxima inferior a %d℃ para %s.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3607,23 +3920,23 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "A temperatura do bico recomendada para este tipo de filamento é [%d, %d] " -"graus centígrados" +"graus Celsius." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Fluxo volumétrico máximo está muito baixo.\n" -"Redefinir para 0,5" +"Redefinir para 0,5." #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "A temperatura da câmara atual está mais alta do que a temperatura segura do " @@ -3632,17 +3945,17 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Altura da camada muito pequena.\n" -"Redefinir para 0,2" +"Redefinir para 0,2." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" -"Espaçamento de alisamento muito pequeno.\n" -"Redefinir para 0,1" +"Espaçamento de passar a ferro muito pequeno.\n" +"Redefinir para 0,1." msgid "" "Zero initial layer height is invalid.\n" @@ -3665,7 +3978,7 @@ msgstr "" "valor pequeno em alguns casos.\n" "Por exemplo, quando o tamanho do modelo tem um pequeno erro e é difícil de " "ser montado.\n" -"Para ajustes de tamanho grandes, por favor, use a função de escala do " +"Para ajustes de tamanho grandes, por favor use a função de escala do " "modelo.\n" "\n" "O valor será redefinido para 0." @@ -3678,7 +3991,7 @@ msgid "" "The value will be reset to 0." msgstr "" "Uma compensação de pé de elefante muito grande é irrazoável.\n" -"Se realmente tiver um efeito sério de pé de elefante, por favor, verifique " +"Se realmente tiver um efeito sério de pé de elefante, por favor verifique " "outras configurações.\n" "Por exemplo, se a temperatura da mesa estiver muito alta.\n" "\n" @@ -3686,21 +3999,21 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"O perímetro extra alternado não funciona bem quando a espessura vertical da " -"está definida para Todos. " +"A parede extra alternada não funciona bem quando a espessura vertical da " +"casca está definida para Todos." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "Alterar essas configurações automaticamente?\n" -"Sim - Alterar a espessura vertical do perímetro para Moderado e ativar o " -"perímetro extra alternado\n" -"Não - Não usar o perímetro extra alternado" +"Sim - Alterar a espessura vertical da casca garantida para Moderado e ativar " +"a parede extra alternada\n" +"Não - Não usar a parede extra alternada" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3709,10 +4022,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"A Torre Prime não funciona quando a Altura de Camada Adaptativa ou a Altura " -"de Camada de Suporte Independente está ativada.\n" +"A torre de preparo não funciona quando a Altura de Camada Adaptativa ou a " +"Altura de Camada de Suporte Independente está ativada.\n" "Qual você deseja manter?\n" -"SIM — Manter a Torre Prime\n" +"SIM — Manter a Torre de Preparo\n" "NÃO — Manter a Altura de Camada Adaptativa e a Altura de Camada de Suporte " "Independente" @@ -3722,9 +4035,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"A Torre Prime não funciona quando a Altura de Camada Adaptativa está ativa.\n" +"A torre de preparo não funciona quando a Altura de Camada Adaptativa está " +"ativa.\n" "Qual você deseja manter?\n" -"SIM — Manter a Torre Prime\n" +"SIM — Manter a Torre de Preparo\n" "NÃO — Manter a Altura de Camada Adaptativa" msgid "" @@ -3733,19 +4047,12 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"A Torre Prime não funciona quando a Altura da Camada de Suporte Independente " -"está ativa.\n" +"A torre de preparo não funciona quando a Altura da Camada de Suporte " +"Independente está ativa.\n" "Qual você deseja manter?\n" -"SIM — Manter a Torre Prime\n" +"SIM — Manter a Torre de Preparo\n" "NÃO — Manter a Altura da Camada de Suporte Independente" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Ao imprimir por Objeto, o extrusor pode colidir com a saia.\n" -"Portanto, redefina a camada da saia para 1 para evitar isso." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." @@ -3754,33 +4061,63 @@ msgstr "" "Redefinir para 0." msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." msgstr "" -"O modo espiral só funciona quando o perímetro é igual a 1, o suporte está " -"desativado, as camadas de topo são 0, a densidade de preenchimento não " -"sólido é 0 e o tipo de timelapse é tradicional." +"A profundidade do travamento deve ser menor que a profundidade da textura.\n" +"Redefinir para 50% da profundidade da textura." + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Ambos os modos [Extrusão] e [Combinado] de Textura Difusa exigem que o " +"Gerador de Parede Arachne esteja habilitado." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Alterar essas configurações automaticamente?\n" +"Sim - Habilitar Gerador de Parede Arachne\n" +"Não - Desabilitar Gerador de Parede Arachne e setar o modo [Deslocamento] da " +"Textura Difusa" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." +msgstr "" +"O modo espiral só funciona quando as voltas da parede são 1, o suporte está " +"desativado, a detecção de aglomeração por sondagem está desativada, as " +"camadas da casca de topo são 0, a densidade de preenchimento esparso é 0 e o " +"tipo de timelapse é tradicional." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Mas máquinas com estrutura I3 não gerarão vídeos de timelapse." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Alterar essas configurações automaticamente? \n" +"Alterar essas configurações automaticamente?\n" "Sim - Alterar essas configurações e ativar o modo espiral automaticamente\n" "Não - Desistir de usar o modo espiral desta vez" +msgid "Printing" +msgstr "Imprimindo" + msgid "Auto bed leveling" msgstr "Nivelamento automático da mesa" msgid "Heatbed preheating" msgstr "Pré-aquecimento da mesa" -msgid "Sweeping XY mech mode" -msgstr "Modo mecânico de varredura XY" +msgid "Vibration compensation" +msgstr "Compensação de vibração" msgid "Changing filament" msgstr "Troca de filamento" @@ -3788,14 +4125,14 @@ msgstr "Troca de filamento" msgid "M400 pause" msgstr "Pausa M400" -msgid "Paused due to filament runout" -msgstr "Pausado devido ao esgotamento do filamento" +msgid "Paused (filament ran out)" +msgstr "Pausado (filamento terminou)" -msgid "Heating hotend" -msgstr "Aquecendo a hotend" +msgid "Heating nozzle" +msgstr "Bico aquecido" -msgid "Calibrating extrusion" -msgstr "Calibrando a extrusão" +msgid "Calibrating dynamic flow" +msgstr "Calibrando fluxo dinâmico" msgid "Scanning bed surface" msgstr "Digitalizando a superfície da mesa" @@ -3804,7 +4141,7 @@ msgid "Inspecting first layer" msgstr "Inspecionando a primeira camada" msgid "Identifying build plate type" -msgstr "Identificando o tipo de mesa" +msgstr "Identificando o tipo de placa de impressão" msgid "Calibrating Micro Lidar" msgstr "Calibrando Micro Lidar" @@ -3816,81 +4153,141 @@ msgid "Cleaning nozzle tip" msgstr "Limpando a ponta do bico" msgid "Checking extruder temperature" -msgstr "Verificando temperatura do extrusor" +msgstr "Verificando temperatura da extrusora" -msgid "Printing was paused by the user" -msgstr "A impressão foi pausada pelo usuário" +msgid "Paused by the user" +msgstr "Pausado pelo usuário" -msgid "Pause of front cover falling" -msgstr "Pausa de queda da cobertura frontal" +msgid "Pause (front cover fall off)" +msgstr "Pausa (queda da cobertura frontal)" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Calibrando o micro lidar" -msgid "Calibrating extrusion flow" -msgstr "Calibrando o fluxo de extrusão" +msgid "Calibrating flow ratio" +msgstr "Calibrando fluxo" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pausado devido a mau funcionamento da temperatura do bico" +msgid "Pause (nozzle temperature malfunction)" +msgstr "Pausa (problema na temperatura do bico)" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pausado devido a mau funcionamento da temperatura da mesa quente" +msgid "Pause (heatbed temperature malfunction)" +msgstr "Pausa (problema na temperatura da mesa)" msgid "Filament unloading" msgstr "Descarregando filamento" -msgid "Skip step pause" -msgstr "Pausa de passo pulado" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Carregando filamento" -msgid "Motor noise calibration" -msgstr "Calibração de ruído do motor" +msgid "Motor noise cancellation" +msgstr "Cancelamento de ruído do motor" -msgid "Paused due to AMS lost" -msgstr "Pausado devido à perda do AMS" +msgid "Pause (AMS offline)" +msgstr "Pausa (AMS offline)" -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (low speed of the heatbreak fan)" msgstr "" -"Pausado devido a baixa velocidade do ventilador do bloco de aquecimento" -msgid "Paused due to chamber temperature control error" -msgstr "Pausado devido a erro no controle de temperatura da câmara" +msgid "Pause (chamber temperature control problem)" +msgstr "Pausa (problema no controle de temperatura da câmara)" msgid "Cooling chamber" msgstr "Resfriando câmara" -msgid "Paused by the Gcode inserted by user" -msgstr "Pausado pelo Gcode inserido pelo usuário" +msgid "Pause (G-code inserted by user)" +msgstr "Pausa (G-code inserido pelo usuário)" msgid "Motor noise showoff" msgstr "Demonstração de barulho do motor" -msgid "Nozzle filament covered detected pause" -msgstr "Pausado devido a bico coberto por filamento" +msgid "Pause (nozzle clumping)" +msgstr "Pausa (aglomeração do bico)" -msgid "Cutter error pause" -msgstr "Pausa de erro de corte" +msgid "Pause (cutter error)" +msgstr "Pausa (erro no cortador)" -msgid "First layer error pause" -msgstr "Pausa de erro na primeira camada" +msgid "Pause (first layer error)" +msgstr "Pausa (erro na primeira camada)" -msgid "Nozzle clog pause" -msgstr "Pausa de obstrução do bico" +msgid "Pause (nozzle clog)" +msgstr "Pausa (bico entupido)" + +msgid "Measuring motion percision" +msgstr "Medindo precisão de movimento" + +msgid "Enhancing motion percision" +msgstr "Aprimorando a precisão do movimento" + +msgid "Measure motion accuracy" +msgstr "Medir a precisão do movimento" + +msgid "Nozzle offset calibration" +msgstr "Calibração do deslocamento do bico" + +msgid "high temperature auto bed levelling" +msgstr "nivelamento automático da mesa em alta temperatura" + +msgid "Auto Check: Quick Release Lever" +msgstr "Verificação Automática: Alavanca de Liberação Rápida" + +msgid "Auto Check: Door and Upper Cover" +msgstr "Verificação Automática: Porta e Cobertura Superior" + +msgid "Laser Calibration" +msgstr "Calibração do Laser" + +msgid "Auto Check: Platform" +msgstr "Verificação Automática: Plataforma" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "Auto nivelando mesa - fase 1" + +msgid "Auto bed leveling -phase 2" +msgstr "Auto nivelando mesa - fase 2" + +msgid "Heating chamber" +msgstr "Aquecendo câmara" + +msgid "Cooling heatbed" +msgstr "Resfriando mesa" + +msgid "Printing calibration lines" +msgstr "Imprimindo linhas de calibração" + +msgid "Auto Check: Material" +msgstr "Verificação Automática: Material" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "Aguardando mesa aquecida atingir a temperatura desejada" + +msgid "Auto Check: Material Position" +msgstr "Verificação Automática: Posição do Material" + +msgid "Cutting Module Offset Calibration" +msgstr "Calibração de Deslocamento do Módulo de Corte" + +msgid "Measuring Surface" +msgstr "Medindo Superfície" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" +"Pré-condicionamento térmico para otimização da primeira camada" msgid "Unknown" msgstr "Desconhecido" -msgid "Fatal" -msgstr "Fatal" - -msgid "Serious" -msgstr "Grave" - -msgid "Common" -msgstr "Comum" - msgid "Update successful." msgstr "Atualização bem-sucedida." @@ -3903,34 +4300,74 @@ msgstr "Verificação falhou." msgid "Update failed." msgstr "Atualização falhou." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." msgstr "" -"A temperatura atual da câmara ou a temperatura da câmara alvo excede 45℃. " -"Para evitar obstrução do extrusor, não é permitido carregar filamento de " -"baixa temperatura (PLA/PETG/TPU)." +"Timelapse não é suportado nessa impressora." + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" +"Timelapse não é suportado enquanto o armazenamento não existe." + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" +"Timelapse não é suportado enquanto o armazenamento não está disponível." + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" +"Timelapse não é suportado enquanto o armazenamento é apenas para leitura." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." msgstr "" -"Filamento de baixa temperatura (PLA/PETG/TPU) está carregado na extrusora. " -"Para evitar obstrução do extrusor, não é permitido ajustar a temperatura da " -"câmara acima de 45℃." +"Para garantir sua segurança, certas tarefas de processamento (como o laser) " +"só podem ser retomadas na própria impressora." + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" +"A temperatura da câmara está muito alta, o que pode causar o amolecimento do " +"filamento. Aguarde até que a temperatura da câmara caia abaixo de %d℃. Você " +"pode abrir a porta frontal ou ligar os ventiladores para resfriar." + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" +"A temperatura do AMS está muito alta, o que pode causar o amolecimento do " +"filamento. Aguarde até que a temperatura do AMS caia abaixo de %d℃." + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" +"A temperatura atual da câmara ou a temperatura alvo da câmara excede 45°C. " +"Para evitar o entupimento da extrusora, não é permitido o carregamento de " +"filamentos de baixa temperatura (PLA/PETG/TPU)." + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" +"O filamento de baixa temperatura (PLA/PETG/TPU) está carregado na extrusora. " +"Para evitar o entupimento da extrusora, não é permitido ajustar a " +"temperatura da câmara." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Quando você definir a temperatura da câmara abaixo de 40℃, o controle de " "temperatura da câmara não será ativado. E a temperatura alvo da câmara será " "automaticamente definida como 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Falha ao iniciar o trabalho de impressão" msgid "" @@ -3943,45 +4380,91 @@ msgstr "O parâmetro de calibração de fluxo atual é inválido" msgid "Selected diameter and machine diameter do not match" msgstr "O diâmetro selecionado e o diâmetro da máquina não correspondem" -msgid "Failed to generate cali gcode" -msgstr "Falha ao gerar o código G de calibração" +msgid "Failed to generate cali G-code" +msgstr "Falha ao gerar o G-code de calibração" msgid "Calibration error" msgstr "Erro de calibração" -msgid "TPU is not supported by AMS." -msgstr "TPU não é suportado pelo AMS." +msgid "Resume Printing" +msgstr "Retomar impressão" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF não é suportado pelo AMS." +msgid "Resume (defects acceptable)" +msgstr "Retomar (defeitos aceitáveis)" -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "" -"O PVA úmido se tornará flexível e ficará preso dentro do AMS, por favor, " -"tenha cuidado para secá-lo antes de usar." +msgid "Resume (problem solved)" +msgstr "Retomar (problema resolvido)" -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "" -"Os filamentos CF/GF são duros e quebradiços, é fácil quebrar ou ficar preso " -"no AMS, por favor, use com cautela." +msgid "Stop Printing" +msgstr "Parar impressão" + +msgid "Check Assistant" +msgstr "Checar Assistente" + +msgid "Filament Extruded, Continue" +msgstr "Filamento Extrudado, Continuar" + +msgid "Not Extruded Yet, Retry" +msgstr "Não Extrudado, Tente Novamente" + +msgid "Finished, Continue" +msgstr "Concluído, Continuar" + +msgid "Load Filament" +msgstr "Carregar Filamento" + +msgid "Filament Loaded, Resume" +msgstr "Filamento Carregado, Retomar" + +msgid "View Liveview" +msgstr "Exibir vista ao vivo" + +msgid "No Reminder Next Time" +msgstr "Sem Aviso da Próxima Vez" + +msgid "Ignore. Don't Remind Next Time" +msgstr "Ignorar. Não Avise da Próxima Vez" + +msgid "Ignore this and Resume" +msgstr "Ignorar isso e Retomar" + +msgid "Problem Solved and Resume" +msgstr "Problema Resolvido e Retome" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "Entendido, Desligar o Alareme de Incêndio." + +msgid "Retry (problem solved)" +msgstr "Retentar (problema resolvido)" + +msgid "Stop Drying" +msgstr "Parar de Secar" + +msgid "Done" +msgstr "Concluído" + +msgid "Retry" +msgstr "Tentar Novamente" + +msgid "Resume" +msgstr "Continuar" + +msgid "Unknown error." +msgstr "Erro desconhecido." msgid "default" msgstr "padrão" #, boost-format msgid "Edit Custom G-code (%1%)" -msgstr "Editar G-Code personalizado (%1%)" +msgstr "Editar G-code personalizado (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" "Marcadores de posição incorporados (Clique duas vezes no item para adicionar " "ao G-code)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Procurar marcadores de posição do G-code" msgid "Add selected placeholder to G-code" @@ -4040,8 +4523,8 @@ msgid "parameter name" msgstr "nome do parâmetro" #, c-format, boost-format -msgid "%s can't be percentage" -msgstr "%s não pode ser percentagem" +msgid "%s can't be a percentage" +msgstr "%s não pode ser uma percentagem" #, c-format, boost-format msgid "Value %s is out of range, continue?" @@ -4079,12 +4562,31 @@ msgid "Input value is out of range" msgstr "Valor de entrada está fora do limite" msgid "Some extension in the input is invalid" +msgstr "Alguma extensão na entrada é inválida" + +msgid "This parameter expects a valid template." +msgstr "Esse parâmetro espera um gabarito válido." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "" +"Padrão inválido. Use N, N#K, ou uma lista separa por vírgulas com #K " +"opcional por entrada. Examplos: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Formato inválido. Formato de vetor esperado: \"%1%\"" +msgid "N/A" +msgstr "N/D" + +msgid "Pick" +msgstr "Escolher" + +msgid "Summary" +msgstr "Sumário" + msgid "Layer Height" msgstr "Altura da Camada" @@ -4094,9 +4596,6 @@ msgstr "Largura da Linha" msgid "Fan Speed" msgstr "Velocidade do Ventilador" -msgid "Temperature" -msgstr "Temperatura" - msgid "Flow" msgstr "Fluxo" @@ -4130,8 +4629,8 @@ msgstr "Ventilador: " msgid "Temperature: " msgstr "Temperatura: " -msgid "Loading G-codes" -msgstr "Carregando G-codes" +msgid "Loading G-code" +msgstr "Carregando G-code" msgid "Generating geometry vertex data" msgstr "Gerando dados de vértices de geometria" @@ -4140,7 +4639,7 @@ msgid "Generating geometry index data" msgstr "Gerando dados de índice de geometria" msgid "Statistics of All Plates" -msgstr "Estatísticas de Todas as Mesas" +msgstr "Estatísticas de Todas as Placas" msgid "Display" msgstr "Exibição" @@ -4152,7 +4651,7 @@ msgid "Tower" msgstr "Torre" msgid "Total" -msgstr "Total:" +msgstr "Total" msgid "Total Estimation" msgstr "Estimativa Total" @@ -4163,6 +4662,87 @@ msgstr "Tempo total" msgid "Total cost" msgstr "Custo total" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" +"Refatiar automaticamente de acordo com o agrupamento ideal de filamentos, " +"os resultados do agrupamento serão exibidos após o fatiamento." + +msgid "Filament Grouping" +msgstr "Agrupamento de Filamento" + +msgid "Why this grouping" +msgstr "Motivo desse agrupamento" + +msgid "Left nozzle" +msgstr "Bico esquerdo" + +msgid "Right nozzle" +msgstr "Bico direito" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" +"Coloque os filamentos na impressora de acordo com o resultado do agrupamento." + +msgid "Tips:" +msgstr "Dicas:" + +msgid "Current grouping of slice result is not optimal." +msgstr "O agrupamento atual do resultado do fatiamento não é o ideal." + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" +"Aumento de %1%g no filamento e %2% nas trocas em comparação com o " +"agrupamento ideal." + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" +"Aumento de %1%g no filamento e economia de %2% nas trocas em comparação com " +"o agrupamento ideal." + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" +"Economia de %1%g no filamento e aumento de %2% nas trocas em comparação com " +"o agrupamento ideal." + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" +"Economia de %1%g no filamento e %2% nas trocas em comparação com uma " +"impressora com um bico." + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" +"Economia de %1%g no filamento e aumento de %2% nas trocas em comparação com " +"uma impressora com um bico." + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" +"Aumento de %1%g no filamento e economia de %2% nas trocas em comparação com " +"uma impressora com um bico." + +msgid "Set to Optimal" +msgstr "Definir para Ideal" + +msgid "Regroup filament" +msgstr "Reagrupar filamento" + +msgid "Tips" +msgstr "Dicas" + msgid "up to" msgstr "até" @@ -4172,17 +4752,11 @@ msgstr "acima" msgid "from" msgstr "de" -msgid "Color Scheme" -msgstr "Esquema de Cores" - msgid "Time" msgstr "Tempo" -msgid "Percent" -msgstr "Porcentagem" - -msgid "Used filament" -msgstr "Fil. usado" +msgid "Usage" +msgstr "Uso" msgid "Layer Height (mm)" msgstr "Altura da Camada (mm)" @@ -4229,12 +4803,12 @@ msgstr "deslocamento" msgid "Extruder" msgstr "Extrusora" -msgid "Filament change times" -msgstr "Quantidade de trocas de filamento" - msgid "Cost" msgstr "Custo" +msgid "Filament change times" +msgstr "Quantidade de trocas de filamento" + msgid "Color change" msgstr "Mudança de Cor" @@ -4244,17 +4818,14 @@ msgstr "Imprimir" msgid "Printer" msgstr "Impressora" -msgid "Custom g-code" -msgstr "G-Code Personalizado" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Mudança de Ferramenta" msgid "Time Estimation" msgstr "Estimativa de Tempo" msgid "Normal mode" -msgstr "Modo Normal" +msgstr "Modo normal" msgid "Total Filament" msgstr "Filamento Total" @@ -4263,10 +4834,10 @@ msgid "Model Filament" msgstr "Modelo do Filamento" msgid "Prepare time" -msgstr "Tempo de Preparo" +msgstr "Tempo de preparo" msgid "Model printing time" -msgstr "Tempo de Impressão do Modelo" +msgstr "Tempo de impressão do modelo" msgid "Switch to silent mode" msgstr "Mudar para o modo silencioso" @@ -4274,6 +4845,26 @@ msgstr "Mudar para o modo silencioso" msgid "Switch to normal mode" msgstr "Mudar para o modo normal" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" +"Um objeto foi colocado na área exclusiva para bicos esquerdo/direito ou " +"excede a altura imprimível do bico esquerdo.\n" +"Certifique-se de que os filamentos usados por este objeto não estejam " +"direcionados para outros bicos." + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"Um objeto está sobreposto ao limite da placa ou excede o limite de altura.\n" +"Por favor resolva o problema movendo-o totalmente para dentro ou para fora " +"da placa e confirmando que a altura está dentro do volume de impressão." + msgid "Variable layer height" msgstr "Altura de Camada Variável" @@ -4284,35 +4875,23 @@ msgid "Quality / Speed" msgstr "Qualidade / Velocidade" msgid "Smooth" -msgstr "Suavização" +msgstr "Suave" msgid "Radius" msgstr "Raio" msgid "Keep min" -msgstr "Manter Mínimo" - -msgid "Left mouse button:" -msgstr "Botão esquerdo do mouse:" +msgstr "Manter mínimo" msgid "Add detail" msgstr "Adicionar detalhe" -msgid "Right mouse button:" -msgstr "Botão direito do mouse:" - msgid "Remove detail" msgstr "Remover detalhe" -msgid "Shift + Left mouse button:" -msgstr "Shift + Botão esquerdo do mouse:" - msgid "Reset to base" msgstr "Redefinir para a base" -msgid "Shift + Right mouse button:" -msgstr "Shift + Botão direito do mouse:" - msgid "Smoothing" msgstr "Suavização" @@ -4325,6 +4904,64 @@ msgstr "Aumentar/diminuir área de edição" msgid "Sequence" msgstr "Sequência" +msgid "object selection" +msgstr "seleção de objeto" + +msgid "part selection" +msgstr "seleção de peça" + +msgid "number keys" +msgstr "teclas numéricas" + +msgid "number keys can quickly change the color of objects" +msgstr "teclas numéricas podem mudar a cor dos objetos rapidamente" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" +"Os seguintes objetos estão dispostos sobre o limite da placa ou excedem o " +"limite de altura:\n" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" +"Por favor, resolva o problema movendo-o totalmente para dentro ou para " +"fora da plataforma e confirmando se a altura está dentro do volume de " +"impressão.\n" + +msgid "left nozzle" +msgstr "bico esquerdo" + +msgid "right nozzle" +msgstr "bico direito" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" +"A posição ou o tamanho de alguns modelos excede a área imprimível de %s." + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" +"A posição ou o tamanho do modelo %s excede a área imprimível de %s." + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" +" Por favor, verifique e ajuste a posição ou o tamanho da peça para que se " +"ajuste à área imprimível:\n" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "Bico esquerdo: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "Bico direito: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" + msgid "Mirror Object" msgstr "Espelhar Objeto" @@ -4350,7 +4987,7 @@ msgid "Orient" msgstr "Orientar" msgid "Arrange options" -msgstr "Opções de Organização" +msgstr "Opções de arranjo" msgid "Spacing" msgstr "Espaçamento" @@ -4359,10 +4996,10 @@ msgid "0 means auto spacing." msgstr "0 significa auto-espaçamento." msgid "Auto rotate for arrangement" -msgstr "Girar automaticamente para arranjo" +msgstr "Rotacionar automaticamente para arranjar" msgid "Allow multiple materials on same plate" -msgstr "Permitir vários materiais na mesma mesa" +msgstr "Permitir vários materiais na mesma placa" msgid "Avoid extrusion calibration region" msgstr "Evitar a região de calibração da extrusão" @@ -4370,17 +5007,31 @@ msgstr "Evitar a região de calibração da extrusão" msgid "Align to Y axis" msgstr "Alinhar com o eixo Y" -msgid "Add plate" -msgstr "Adicionar mesa" +msgctxt "Camera" +msgid "Left" +msgstr "Esquerda" -msgid "Auto orient" -msgstr "Orientação automática" +msgctxt "Camera" +msgid "Right" +msgstr "Direita" + +msgid "Add" +msgstr "Adicionar" + +msgid "Add plate" +msgstr "Adicionar placa" + +msgid "Auto orient all/selected objects" +msgstr "Orientação automática todos/selecionados objetos" + +msgid "Auto orient all objects on current plate" +msgstr "Orientação automática todos os objetos na placa atual" msgid "Arrange all objects" msgstr "Organizar todos os objetos" msgid "Arrange objects on selected plates" -msgstr "Organizar objetos nas mesas selecionadas" +msgstr "Organizar objetos nas placas selecionadas" msgid "Split to objects" msgstr "Dividir em objetos" @@ -4389,16 +5040,34 @@ msgid "Split to parts" msgstr "Dividir em peças" msgid "Assembly View" -msgstr "Visualização de Montagem" +msgstr "Vista de Montagem" msgid "Select Plate" -msgstr "Selecionar Mesa" +msgstr "Selecionar Placa" + +msgid "Slicing" +msgstr "Fatiando" + +msgid "Slice all" +msgstr "Fatiar Tudo" + +msgid "Failed" +msgstr "Falhou" + +msgid "All Plates" +msgstr "Todas as Placas" + +msgid "Stats" +msgstr "Estatísticas" msgid "Assembly Return" msgstr "Retornar à Montagem" -msgid "return" -msgstr "retornar" +msgid "Return" +msgstr "Retornar" + +msgid "Toggle Axis" +msgstr "Alternar Eixos" msgid "Paint Toolbar" msgstr "Barra de Ferramentas de Pintura" @@ -4407,11 +5076,14 @@ msgid "Explosion Ratio" msgstr "Taxa de Explosão" msgid "Section View" -msgstr "Visualização de Seção" +msgstr "Vista de Seção" msgid "Assemble Control" msgstr "Controle de Montagem" +msgid "Selection Mode" +msgstr "Modo de Seleção" + msgid "Total Volume:" msgstr "Volume Total:" @@ -4426,32 +5098,83 @@ msgstr "Tamanho:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Foram encontrados conflitos de caminhos de G-code na camada %d, z = %.2lf " -"mm. Por favor, separe mais os objetos em conflito (%s <-> %s)." +"Foram encontrados conflitos de caminhos de G-code na camada %d, Z = %.2lfmm. " +"Por favor, separe mais os objetos em conflito (%s <-> %s)." -msgid "An object is layed over the boundary of plate." -msgstr "Um objeto está sobre a borda da mesa." +msgid "An object is laid over the plate boundaries." +msgstr "Um objeto está sobre a borda da placa." msgid "A G-code path goes beyond the max print height." msgstr "Um caminho de G-code ultrapassa a altura máxima de impressão." -msgid "A G-code path goes beyond the boundary of plate." -msgstr "Um caminho de G-code ultrapassa a borda da mesa." +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Um caminho de G-code ultrapassa a borda da placa." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "Não suporta a impressão de 2 ou mais filamentos de TPU." + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" +"O filamento %s foi colocado em %s, mas o caminho do G-code gerado excede a " +"área imprimível de %s." + +#, c-format, boost-format +msgid "" +"Filaments %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" +"Os filamentos %s foram colocado em %s, mas o caminho do G-code gerado excede " +"a área imprimível de %s." + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" +"O filamento %s foi colocado em %s, mas o caminho do G-code gerado excede a " +"altura imprimível de %s." + +#, c-format, boost-format +msgid "" +"Filaments %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" +"Os filamentos %s foram colocado em %s, mas o caminho do G-code gerado excede " +"a altura imprimível de %s." + +msgid "Open wiki for more information." +msgstr "Abra a wiki para obter mais informações." + +msgid "Only the object being edited is visible." msgstr "Apenas o objeto em edição está visível." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." msgstr "" -"Um objeto está sobre a borda da mesa ou ultrapassa o limite de altura.\n" -"Por favor, resolva o problema movendo-o totalmente para dentro ou para fora " -"da mesa, e confirmando que a altura está dentro do volume de impressão." +"os filamentos %s não podem ser impressos diretamente na superfície desta " +"placa." + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" +"Filamentos PLA e PETG detectados na mistura. Ajuste os parâmetros de acordo " +"com o Wiki para garantir a qualidade de impressão." + +msgid "The prime tower extends beyond the plate boundary." +msgstr "A torre de preparo estende-se para além do limite da placa." + +msgid "Click Wiki for help." +msgstr "Clique em Wiki para obter ajuda." + +msgid "Click here to regroup" +msgstr "Clique aqui para reagrupar" msgid "Calibration step selection" msgstr "Seleção de etapa de calibração" @@ -4462,11 +5185,8 @@ msgstr "Calibração do micro lidar" msgid "Bed leveling" msgstr "Nivelamento da mesa" -msgid "Vibration compensation" -msgstr "Compensação de vibração" - -msgid "Motor noise cancellation" -msgstr "Cancelamento de ruído do motor" +msgid "High-temperature Heatbed Calibration" +msgstr "Calibração de Mesa Aquecida de Alta Temperatura" msgid "Calibration program" msgstr "Programa de calibração" @@ -4478,7 +5198,7 @@ msgid "" msgstr "" "O programa de calibração detecta automaticamente o estado do seu dispositivo " "para minimizar desvios.\n" -"Mantém o dispositivo com desempenho ideal." +"Mantém o dispositivo com o desempenho ideal." msgid "Calibration Flow" msgstr "Calibração de Fluxo" @@ -4519,24 +5239,25 @@ msgstr "Fonte de câmera personalizada" msgid "Show \"Live Video\" guide page." msgstr "Mostrar página de guia \"Vídeo ao Vivo\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Conectar Impressora (LAN)" msgid "Please input the printer access code:" -msgstr "Por favor, insira o código de acesso à impressora:" +msgstr "Por favor insira o código de acesso à impressora:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Você pode encontrá-lo em \"Configurações > Rede > Código de Conexão\"\n" -"na impressora, conforme mostrado na figura:" +"Você pode encontrá-lo em \"Configurações > Rede > Código de acesso\"\n" +"na impressora, como mostrado na figura:" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" +"on the printer, as shown in the figure:" +msgstr "" +"Você pode encontrá-lo em \"Configurações > Apenas LAN > Código de acesso\"\n" +"na impressora, como mostrado na figura:" msgid "Invalid input." msgstr "Entrada inválida." @@ -4551,14 +5272,20 @@ msgid "Application is closing" msgstr "Aplicativo está fechando" msgid "Closing Application while some presets are modified." -msgstr "Fechando o aplicativo enquanto alguns perfis estão sendo modificados." +msgstr "Fechando o aplicativo enquanto algumas predefinições são modificadas." msgid "Logging" msgstr "Registro" +msgid "Prepare" +msgstr "Preparar" + msgid "Preview" msgstr "Pré-visualizar" +msgid "Device" +msgstr "Dispositivo" + msgid "Multi-device" msgstr "Multi-dispositivo" @@ -4575,19 +5302,19 @@ msgid "will be closed before creating a new model. Do you want to continue?" msgstr "será fechado antes de criar um novo modelo. Deseja continuar?" msgid "Slice plate" -msgstr "Fatiar Mesa" +msgstr "Fatiar Placa" msgid "Print plate" -msgstr "Imprimir mesa" - -msgid "Slice all" -msgstr "Fatiar Tudo" +msgstr "Imprimir placa" msgid "Export G-code file" msgstr "Exportar arquivo G-code" +msgid "Send" +msgstr "Enviar" + msgid "Export plate sliced file" -msgstr "Exportar arquivo de mesa fatiada" +msgstr "Exportar arquivo de placa fatiada" msgid "Export all sliced file" msgstr "Exportar todos os arquivos fatiados" @@ -4598,6 +5325,9 @@ msgstr "Imprimir tudo" msgid "Send all" msgstr "Enviar tudo" +msgid "Send to Multi-device" +msgstr "Enviar para multi-dispositivo" + msgid "Keyboard Shortcuts" msgstr "Atalhos de Teclado" @@ -4630,45 +5360,35 @@ msgid "Download Models" msgstr "Baixar Modelos" msgid "Default View" -msgstr "Visualização Padrão" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Topo" +msgstr "Vista Padrão" msgid "Top View" -msgstr "Visualização Superior" +msgstr "Vista Superior" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" msgstr "Inferior" msgid "Bottom View" -msgstr "Visualização Inferior" +msgstr "Vista Inferior" msgid "Front" msgstr "Frente" msgid "Front View" -msgstr "Visualização Frontal" +msgstr "Vista Frontal" msgid "Rear" msgstr "Traseira" msgid "Rear View" -msgstr "Visualização Traseira" - -msgid "Left" -msgstr "Esquerda" +msgstr "Vista Traseira" msgid "Left View" msgstr "Visualização Esquerda" -msgid "Right" -msgstr "Direita" - msgid "Right View" -msgstr "Visualização Direita" +msgstr "Vista Direita" msgid "Start a new window" msgstr "Abrir nova janela" @@ -4682,8 +5402,8 @@ msgstr "Iniciar um novo projeto" msgid "Open a project file" msgstr "Abrir um arquivo de projeto" -msgid "Recent projects" -msgstr "Projetos recentes" +msgid "Recent files" +msgstr "Arquivos recentes" msgid "Save Project" msgstr "Salvar Projeto" @@ -4694,9 +5414,6 @@ msgstr "Salvar projeto atual em arquivo" msgid "Save Project as" msgstr "Salvar projeto como" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Salvar o projeto atual como" @@ -4730,23 +5447,26 @@ msgstr "Exportar todos os objetos como STLs" msgid "Export Generic 3MF" msgstr "Exportar 3MF Genérico" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exportar arquivo 3mf sem usar algumas extensões 3mf" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exportar arquivo 3MF sem usar algumas extensões-3mf" msgid "Export current sliced file" msgstr "Exportar arquivo fatiado atual" msgid "Export all plate sliced file" -msgstr "Exportar todos os arquivos de mesa fatiados" +msgstr "Exportar todos os arquivos de placa fatiados" msgid "Export G-code" msgstr "Exportar G-code" msgid "Export current plate as G-code" -msgstr "Exportar a mesa atual como G-code" +msgstr "Exportar a placa atual como G-code" + +msgid "Export toolpaths as OBJ" +msgstr "Exportar trilhas de ferramentas como OBJ" msgid "Export Preset Bundle" -msgstr "Exportar Pacote de Presets" +msgstr "Exportar Pacote de Predefinições" msgid "Export current configuration to files" msgstr "Exportar configuração atual para arquivos" @@ -4796,6 +5516,12 @@ msgstr "Clonar selecionado" msgid "Clone copies of selections" msgstr "Clonar cópias das seleções" +msgid "Duplicate Current Plate" +msgstr "Duplicar Placa Atual" + +msgid "Duplicate the current plate" +msgstr "Duplicar a placa atual" + msgid "Select all" msgstr "Selecionar tudo" @@ -4814,17 +5540,27 @@ msgstr "Usar Vista em Perspectiva" msgid "Use Orthogonal View" msgstr "Usar Vista Ortogonal" +msgid "Auto Perspective" +msgstr "Perspectiva Automática" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Alternar automaticamente entre ortográfica e perspectiva ao mudar de vista " +"superior/inferior/lateral." + msgid "Show &G-code Window" msgstr "Mostrar Janela &G-code" -msgid "Show g-code window in Previce scene" -msgstr "Mostrar janela de código G na cena anterior" +msgid "Show G-code window in Preview scene." +msgstr "Mostrar janela de G-code na cena de Pré-visualização." msgid "Show 3D Navigator" msgstr "Mostrar Navegador 3D" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Mostrar navegador 3D nas cenas de preparação e pré-visualização" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Mostrar navegador 3D nas cenas de Preparação e Pré-visualização." msgid "Reset Window Layout" msgstr "Redefinir Layout da Janela" @@ -4835,18 +5571,27 @@ msgstr "Redefinir layout padrão da janela" msgid "Show &Labels" msgstr "Mostrar & Etiquetas" -msgid "Show object labels in 3D scene" -msgstr "Mostrar etiquetas de objeto na cena 3D" +msgid "Show object labels in 3D scene." +msgstr "Mostrar etiquetas de objeto na cena 3D." msgid "Show &Overhang" -msgstr "Mostrar &Sobrecarga" +msgstr "Mostrar &Saliência" -msgid "Show object overhang highlight in 3D scene" -msgstr "Mostrar destaque de sobrecarga de objeto na cena 3D" +msgid "Show object overhang highlight in 3D scene." +msgstr "Mostrar realce de saliência de objeto na cena 3D." + +msgid "Show Selected Outline (beta)" +msgstr "Mostrar Contorno Selecionado (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Mostrar contorno ao redor do objeto selecionado na cena 3D." msgid "Preferences" msgstr "Preferências" +msgid "View" +msgstr "Visualizar" + msgid "Help" msgstr "Ajuda" @@ -4865,36 +5610,54 @@ msgstr "Passo 2" msgid "Flow rate test - Pass 2" msgstr "Teste de fluxo - Passo 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (Recomendado)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Calibração de fluxo YOLO Orca, passo de 0.01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (versão perfeccionista)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Calibração de fluxo YOLO Orca, passo de 0.005" + msgid "Flow rate" msgstr "Fluxo" msgid "Pressure advance" -msgstr "Pressure Advance" +msgstr "Avanço de pressão" msgid "Retraction test" msgstr "Teste de retração" -msgid "Orca Tolerance Test" -msgstr "Teste de Tolerância Orca" - msgid "Max flowrate" msgstr "Fluxo máximo" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "Frequência da Modelagem de Entrada" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Fator de Amortecimento/zeta da Modelagem de Entrada" + +msgid "Input Shaping" +msgstr "Modelagem de Entrada" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Mais..." - msgid "Tutorial" msgstr "Tutorial" msgid "Calibration help" msgstr "Ajuda de calibração" -msgid "More calibrations" -msgstr "Mais calibrações" - msgid "&Open G-code" msgstr "&Abrir G-code" @@ -4910,9 +5673,6 @@ msgstr "Recarregar o bandeija do disco" msgid "Export &Toolpaths as OBJ" msgstr "Exportar &Trilhas de Ferramentas como OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Exportar trilhas de ferramentas como OBJ" - msgid "Open &Slicer" msgstr "Abrir &Fatiador" @@ -4936,15 +5696,18 @@ msgid "&Help" msgstr "&Ajuda" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Já existe um arquivo com o mesmo nome: %s. Deseja substituí-lo?" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Existe um arquivo com o mesmo nome: %s, deseja sobrescrevê-lo?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Já existe uma configuração com o mesmo nome: %s. Deseja substituí-la?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Existe uma configuração com o mesmo nome: %s, deseja sobrescrevê-la?" msgid "Overwrite file" -msgstr "Substituir arquivo" +msgstr "Sobrescrever arquivo" + +msgid "Overwrite config" +msgstr "Sobrescrever configuração" msgid "Yes to All" msgstr "Sim para Todos" @@ -5002,17 +5765,17 @@ msgid "Filament Settings" msgstr "Configurações do Filamento" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Você deseja sincronizar seus dados pessoais da Bambu Cloud? \n" +"Você deseja sincronizar seus dados pessoais da Bambu Cloud?\n" "Isso inclui as seguintes informações:\n" -"1. Os perfis de Processo\n" -"2. Os perfis de Filamento\n" -"3. Os perfis de Impressora" +"1. Predefinições de Processo\n" +"2. Predefinições de Filamento\n" +"3. Predefinições de Impressora" msgid "Synchronization" msgstr "Sincronização" @@ -5029,7 +5792,7 @@ msgstr "" msgid "The player is not loaded, please click \"play\" button to retry." msgstr "" -"O reprodutor não está carregado, por favor, clique no botão \"Reproduzir\" " +"O reprodutor não está carregado, por favor clique no botão \"Reproduzir\" " "para tentar novamente." msgid "Please confirm if the printer is connected." @@ -5044,7 +5807,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "A câmera da impressora está com problemas." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Ocorreu um problema. Por favor, atualize o firmware da impressora e tente " "novamente." @@ -5052,30 +5815,30 @@ msgstr "" msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"Liveview via LAN está desativado. Por favor, ative a liveview na tela da " +"Liveview via LAN está desativado. Por favor, ative a liveview na tela da " "impressora." msgid "Please enter the IP of printer to connect." msgstr "Por favor, digite o IP da impressora para conectar." msgid "Initializing..." -msgstr "Inicializando..." +msgstr "Inicializando…" msgid "Connection Failed. Please check the network and try again" msgstr "Falha na conexão. Por favor, verifique a rede e tente novamente" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" -"Por favor, verifique a rede e tente novamente, você pode reiniciar ou " +"Por favor, verifique a rede e tente novamente. Você pode reiniciar ou " "atualizar a impressora se o problema persistir." msgid "The printer has been logged out and cannot connect." msgstr "A impressora foi desconectada e não pode se conectar." -msgid "Stopped." -msgstr "Parado." +msgid "Video Stopped." +msgstr "Vídeo Parado." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Falha na conexão da LAN (Falha ao iniciar a visualização ao vivo)" @@ -5110,7 +5873,10 @@ msgid "Information" msgstr "Informação" msgid "Playing..." -msgstr "Reproduzindo..." +msgstr "Reproduzindo…" + +msgid "Loading..." +msgstr "Carregando…" msgid "Year" msgstr "Ano" @@ -5130,6 +5896,9 @@ msgstr "Agrupar arquivos por mês, mais recentes primeiro." msgid "Show all files, recent first." msgstr "Mostrar todos os arquivos, mais recentes primeiro." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Mudar para arquivos de timelapse." @@ -5139,8 +5908,8 @@ msgstr "Vídeo" msgid "Switch to video files." msgstr "Mudar para arquivos de vídeo." -msgid "Switch to 3mf model files." -msgstr "Mudar para arquivos de modelo 3mf." +msgid "Switch to 3MF model files." +msgstr "Mudar para arquivos de modelo 3MF." msgid "Delete selected files from printer." msgstr "Excluir arquivos selecionados da impressora." @@ -5166,12 +5935,8 @@ msgstr "Recarregar lista de arquivos da impressora." msgid "No printers." msgstr "Nenhuma impressora." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Falha ao conectar [%d]!" - msgid "Loading file list..." -msgstr "Carregando lista de arquivos..." +msgstr "Carregando lista de arquivos…" msgid "No files" msgstr "Sem arquivos" @@ -5179,28 +5944,18 @@ msgstr "Sem arquivos" msgid "Load failed" msgstr "Falha ao carregar" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Inicialização falhou (Conexão do dispositivo não está pronta)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Procurar arquivo no cartão SD não é suportado no firmware atual. Por favor, " -"atualize o firmware da impressora." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "Inicialização falhou (falha no armazenamento, insira o cartão SD.)!" +"Procurar arquivo no armazenamento não é suportado no firmware atual. " +"Atualize o firmware da impressora." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Falha na conexão LAN (Falha para ver o cartão SD)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Procurar arquivo no cartão SD não é suportado no Modo Somente LAN." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Inicialização falhou (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "Procurar arquivo no armazenamento não é suportado no Modo Somente LAN." #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5223,8 +5978,8 @@ msgstr "Deseja excluir o arquivo '%s' da impressora?" msgid "Delete file" msgstr "Excluir arquivo" -msgid "Fetching model infomations ..." -msgstr "Obtendo informações do modelo ..." +msgid "Fetching model information..." +msgstr "Obtendo informações do modelo…" msgid "Failed to fetch model information from printer." msgstr "Falha ao obter informação do modelo da impressora." @@ -5233,8 +5988,8 @@ msgid "Failed to parse model information." msgstr "Falha ao analisar a informação do modelo." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "O arquivo .gcode.3mf não contém dados de G-code. Por favor, fatie com Orca " "Slicer e exporte um novo arquivo .gcode.3mf." @@ -5252,7 +6007,7 @@ msgstr "" "Título: %s\n" msgid "Download waiting..." -msgstr "Aguardando download..." +msgstr "Aguardando download…" msgid "Play" msgstr "Reproduzir" @@ -5265,14 +6020,20 @@ msgstr "Download concluído" #, c-format, boost-format msgid "Downloading %d%%..." -msgstr "Baixando %d%%..." +msgstr "Baixando %d%%…" + +msgid "Air Condition" +msgstr "Condição do Ar" msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" "Reconectando a impressora, a operação não pôde ser concluída imediatamente, " -"por favor, tente novamente mais tarde." +"por favor tente novamente mais tarde." + +msgid "Timeout, please try again." +msgstr "Limite de tempo excedido, tente novamente." msgid "File does not exist." msgstr "O arquivo não existe." @@ -5283,13 +6044,51 @@ msgstr "Erro de checksum do arquivo. Por favor, tente novamente." msgid "Not supported on the current printer version." msgstr "Não suportado na versão atual da impressora." -msgid "Storage unavailable, insert SD card." -msgstr "Armazenamento indisponível, insira um cartão SD." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" +"Verifique se o armazenamento está inserido na impressora.\n" +"Se ainda não for possível lê-lo, tente formatar o armazenamento." + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" +"A versão do firmware da impressora é muito antiga. Atualize o firmware e " +"tente novamente." + +msgid "The file already exists, do you want to replace it?" +msgstr "O arquivo já existe, deseja substituí-lo?" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "Espaço de armazenamento insuficiente, libere espaço e tente novamente." + +msgid "File creation failed, please try again." +msgstr "Falha na criação do arquivo, tente novamente." + +msgid "File write failed, please try again." +msgstr "Falha na gravação do arquivo, tente novamente." + +msgid "MD5 verification failed, please try again." +msgstr "Falha na verificação MD5, tente novamente." + +msgid "File renaming failed, please try again." +msgstr "Falha renomeando arquivo, tente novamente." + +msgid "File upload failed, please try again." +msgstr "Falha no envio do arquivo, tente novamente." #, c-format, boost-format msgid "Error code: %d" msgstr "Código de erro: %d" +msgid "User cancels task." +msgstr "Usuário cancela tarefa." + +msgid "Failed to read file, please try again." +msgstr "Falha ao ler arquivo, tente novamente." + msgid "Speed:" msgstr "Velocidade:" @@ -5321,19 +6120,92 @@ msgid "Invert Z axis" msgstr "Inverter eixo Z" msgid "Invert Yaw axis" -msgstr "Inverter eixo de guinada" +msgstr "Inverter eixo de Guinada" msgid "Invert Pitch axis" -msgstr "Inverter eixo de arfagem" +msgstr "Inverter eixo de Arfagem" msgid "Invert Roll axis" -msgstr "Inverter eixo de rotação" +msgstr "Inverter eixo de Rolamento" + +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Buscar" + +msgid "My Device" +msgstr "Meu dispositivo" + +msgid "Other Device" +msgstr "Outro dispositivo" + +msgid "Online" +msgstr "Disponível" + +msgid "Input access code" +msgstr "Digite o código de acesso" + +msgid "Can't find my devices?" +msgstr "Não consegue encontrar meus dispositivos?" + +msgid "Log out successful." +msgstr "Sessão encerrada com sucesso." + +msgid "Offline" +msgstr "Desconectado" + +msgid "Busy" +msgstr "Ocupado" + +msgid "Modifying the device name" +msgstr "Modificando o nome do dispositivo" + +msgid "Name is invalid;" +msgstr "O nome é inválido;" + +msgid "illegal characters:" +msgstr "caracteres ilegais:" + +msgid "illegal suffix:" +msgstr "sufixo ilegal:" + +msgid "The name is not allowed to be empty." +msgstr "O nome não pode ficar vazio." + +msgid "The name is not allowed to start with space character." +msgstr "O nome não pode começar com um espaço." + +msgid "The name is not allowed to end with space character." +msgstr "O nome não pode terminar com um espaço." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "O nome não pode exceder 32 caracteres." + +msgid "Bind with Pin Code" +msgstr "Vincular com Código PIN" + +msgid "Bind with Access Code" +msgstr "Vincular com Código de Acesso" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "Sair" + +msgid "Switching..." +msgstr "Alternando…" + +msgid "Switching failed" +msgstr "Falha na troca" msgid "Printing Progress" msgstr "Progresso da Impressão" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "Pular Peças" + +msgid "Stop" +msgstr "Parar" msgid "Layer: N/A" msgstr "Camada: N/A" @@ -5363,14 +6235,14 @@ msgstr "Avaliar" msgid "Camera" msgstr "Câmera" -msgid "SD Card" -msgstr "Cartão SD" +msgid "Storage" +msgstr "Armazenamento" msgid "Camera Setting" msgstr "Configuração da Câmera" msgid "Switch Camera View" -msgstr "Trocar Visualização da Câmera" +msgstr "Trocar Vista da Câmera" msgid "Control" msgstr "Controle" @@ -5381,41 +6253,47 @@ msgstr "Partes da Impressora" msgid "Print Options" msgstr "Opções de Impressão" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Lâmpada" -msgid "Aux" -msgstr "Auxiliar" - -msgid "Cham" -msgstr "Filhote" - msgid "Bed" msgstr "Mesa" msgid "Debug Info" msgstr "Informações de Depuração" -msgid "No SD Card" -msgstr "Sem Cartão SD" +msgid "Filament loading..." +msgstr "Carregando filamento…" -msgid "SD Card Abnormal" -msgstr "Cartão SD Anormal" +msgid "No Storage" +msgstr "Sem Armazenamento" + +msgid "Storage Abnormal" +msgstr "Armazenamento Anormal" msgid "Cancel print" msgstr "Cancelar impressão" -msgid "Are you sure you want to cancel this print?" -msgstr "Tem certeza de que deseja cancelar esta impressão?" +msgid "Are you sure you want to stop this print?" +msgstr "Tem certeza de que deseja interromper esta impressão?" + +msgid "The printer is busy with another print job." +msgstr "A impressora está ocupada com outro trabalho de impressão." + +msgid "Current extruder is busy changing filament." +msgstr "A extrusora atual está ocupada trocando o filamento." + +msgid "Current slot has already been loaded." +msgstr "O espaço atual já foi carregado." + +msgid "The selected slot is empty." +msgstr "O espaço selecionado está vazio." msgid "Downloading..." -msgstr "Baixando..." +msgstr "Baixando…" msgid "Cloud Slicing..." -msgstr "Fatiando na Nuvem..." +msgstr "Fatiando na Nuvem…" #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." @@ -5430,28 +6308,26 @@ msgid "Layer: %d/%d" msgstr "Camada: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Aqueça o bico a mais de 170 graus antes de carregar ou descarregar o " -"filamento." +"Aqueça o bico a mais de 170℃ antes de carregar ou descarregar o filamento." -msgid "Still unload" -msgstr "Ainda descarregando" - -msgid "Still load" -msgstr "Ainda carregando" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" +"Se a temperatura da câmara exceder os 40℃, o sistema mudará automaticamente " +"para o modo de aquecimento. Confirme se deseja ativar o modo de aquecimento." msgid "Please select an AMS slot before calibration" -msgstr "Selecione um slot AMS antes da calibração" +msgstr "Selecione um espaço AMS antes da calibração" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " "unload the filament and try again." msgstr "" "Não é possível ler as informações do filamento: o filamento está carregado " -"na cabeça da ferramenta, por favor, descarregue o filamento e tente " -"novamente." +"na cabeça da ferramenta, por favor descarregue o filamento e tente novamente." msgid "This only takes effect during printing" msgstr "Isso só tem efeito durante a impressão" @@ -5466,10 +6342,23 @@ msgid "Sport" msgstr "Esportivo" msgid "Ludicrous" -msgstr "Ludicrous" +msgstr "Absurdo" -msgid "Can't start this without SD card." -msgstr "Não é possível iniciar sem um cartão SD." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" +"Apagar as luzes durante a tarefa causará falha no monitoramento por IA, " +"como na detecção de emaranhado. Por favor, escolha com cuidado." + +msgid "Keep it On" +msgstr "Manter Ligado" + +msgid "Turn it Off" +msgstr "Desligar" + +msgid "Can't start this without storage." +msgstr "Não é possível iniciar sem armazenamento." msgid "Rate the Print Profile" msgstr "Avaliar o Perfil de Impressão" @@ -5492,13 +6381,10 @@ msgstr "Enviar" msgid "Please click on the star first." msgstr "Por favor, clique na estrela primeiro." -msgid "InFo" -msgstr "Info" - msgid "Get oss config failed." msgstr "Falha ao obter a configuração oss." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Enviar fotos" msgid "Number of images successfully uploaded" @@ -5513,7 +6399,7 @@ msgstr " falha ao analisar a configuração\n" msgid " No corresponding storage bucket\n" msgstr " Nenhum balde de armazenamento correspondente\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " não pode ser aberto\n" msgid "" @@ -5540,12 +6426,12 @@ msgid "obtaining instance_id failed\n" msgstr "falha ao obter o instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" -"O resultado do seu comentário não pode ser enviado devido a alguns motivos. " -"Como segue:\n" +"O resultado do seu comentário não pode ser enviado devido aos seguintes " +"motivos:\n" "\n" " código de erro: " @@ -5555,7 +6441,7 @@ msgstr "mensagem de erro: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5563,7 +6449,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Algumas de suas imagens não puderam ser carregadas. Gostaria de ser " "redirecionado para a página da web para avaliar?" @@ -5573,21 +6459,31 @@ msgstr "Você pode selecionar até 16 imagens." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Pelo menos um registro de impressão bem-sucedido deste perfil de impressão é " "necessário \n" "para dar uma avaliação positiva (4 ou 5 estrelas)." msgid "Status" -msgstr "Status" +msgstr "Estado" +msgctxt "Firmware" msgid "Update" msgstr "Atualizar" +msgid "Assistant(HMS)" +msgstr "Assistente(HMS)" + msgid "Don't show again" msgstr "Não mostrar novamente" +msgid "Go to" +msgstr "Vá para" + +msgid "Later" +msgstr "Depois" + #, c-format, boost-format msgid "%s error" msgstr "Erro %s" @@ -5615,14 +6511,14 @@ msgstr "Informação %s" msgid "Skip" msgstr "Pular" -msgid "Newer 3mf version" -msgstr "Nova versão 3mf" +msgid "Newer 3MF version" +msgstr "Nova versão 3MF" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" -"A versão 3mf do arquivo está em Beta e é mais nova do que a versão atual do " +"A versão do arquivo 3MF está em Beta e é mais nova do que a versão atual do " "Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" @@ -5631,14 +6527,14 @@ msgstr "Se você gostaria de testar o Snapmaker Orca Beta, clique para" msgid "Download Beta Version" msgstr "Baixar versão beta" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -"A versão do arquivo 3mf é mais recente que a versão atual do Snapmaker Orca." +"A versão do arquivo 3MF é mais recente que a versão atual do Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Atualizar seu Snapmaker Orca poderia permitir todas as funcionalidades do " -"arquivo 3mf." +"Atualizar seu Snapmaker Orca poderia habilitar todas as funcionalidades do " +"arquivo 3MF." msgid "Current Version: " msgstr "Versão Atual: " @@ -5646,9 +6542,36 @@ msgstr "Versão Atual: " msgid "Latest Version: " msgstr "Última Versão: " +msgctxt "Software" +msgid "Update" +msgstr "Atualizar" + msgid "Not for now" msgstr "Não por enquanto" +msgid "Server Exception" +msgstr "Exceção de Servidor" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"O servidor não consegue responder. Por favor clique no link abaixo para " +"verificar o status do servidor." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Se o servidor estiver em estado de falha, você poderá usar temporariamente a " +"impressão offline ou a impressão em rede local." + +msgid "How to use LAN only mode" +msgstr "Como usar o modo somente LAN" + +msgid "Don't show this dialog again" +msgstr "Não mostrar esse diálogo novamente" + msgid "3D Mouse disconnected." msgstr "Mouse 3D desconectado." @@ -5711,9 +6634,15 @@ msgstr[1] "%1$d Objetos têm pintura colorida." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d objeto foi carregado como peça do objeto cortado." -msgstr[1] "%1$d objetos foram carregados como peças do objeto cortado" +msgstr[1] "%1$d objetos foram carregados como peças do objeto cortado." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d objeto foi carregado com pintura de textura difusa." +msgstr[1] "%1$d objeto foram carregados com pintura de textura difusa." msgid "ERROR" msgstr "ERRO" @@ -5736,8 +6665,8 @@ msgstr "Erro:" msgid "Warning:" msgstr "Aviso:" -msgid "Export successfully." -msgstr "Exportação realizada com sucesso." +msgid "Exported successfully" +msgstr "Exportação realizada com sucesso" msgid "Model file downloaded." msgstr "Arquivo do modelo baixado." @@ -5754,11 +6683,11 @@ msgstr " Clique aqui para instalar." msgid "WARNING:" msgstr "AVISO:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Seu modelo precisa de suporte! Por favor, ative o material de suporte." -msgid "Gcode path overlap" -msgstr "Sobreposição de caminho do Gcode" +msgid "G-code path overlap" +msgstr "Sobreposição de caminho do G-code" msgid "Support painting" msgstr "Pintura de suporte" @@ -5807,21 +6736,65 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" -msgid "Enable AI monitoring of printing" -msgstr "Ativar monitoramento de IA da impressão" - -msgid "Sensitivity of pausing is" -msgstr "Sensibilidade da pausa é" - msgid "Enable detection of build plate position" -msgstr "Ativar detecção da posição da mesa" +msgstr "Ativar detecção da posição da placa de impressão" msgid "" "The localization tag of build plate is detected, and printing is paused if " "the tag is not in predefined range." msgstr "" -"A etiqueta de localização da mesa é detectada e a impressão é pausada se a " -"etiqueta não estiver na faixa predefinida." +"A etiqueta de localização da placa de impressão é detectada e a impressão é " +"pausada se a etiqueta não estiver na faixa predefinida." + +msgid "Build Plate Detection" +msgstr "Detecção de Placa" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" +"Identifica o tipo e a posição da placa de impressão na mesa aquecida. " +"Interrompe a impressão se for detectada alguma incompatibilidade." + +msgid "AI Detections" +msgstr "Detecções de AI" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" +"A impressora enviará uma mensagem de assistência ou pausará a impressão se " +"algum dos seguintes problemas for detectado." + +msgid "Enable AI monitoring of printing" +msgstr "Ativar monitoramento de IA da impressão" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "Detecção de Emaranhado" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "Detectar falha de emaranhado (filamentos soltos e dispersos)." + +msgid "Purge Chute Pile-Up Detection" +msgstr "Detecção de Acúmulo na Calha de Purga" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "Verifique se os resíduos estão se acumulando na calha de purga." + +msgid "Nozzle Clumping Detection" +msgstr "Detecção de acúmulo no bico" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" +"Verifica se o bico está obstruído por filamentos ou outros objetos estranhos." + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" +"Detecta falhas na impressão causadas por entupimento do bico ou erosão do " +"filamento." msgid "First Layer Inspection" msgstr "Inspeção da Primeira Camada" @@ -5829,31 +6802,61 @@ msgstr "Inspeção da Primeira Camada" msgid "Auto-recovery from step loss" msgstr "Recuperação automática de perda de passo" +msgid "Open Door Detection" +msgstr "Detecção de Porta Aberta" + +msgid "Notification" +msgstr "Notificação" + +msgid "Pause printing" +msgstr "Pausar impressão" + +msgid "Store Sent Files on External Storage" +msgstr "Armazenar Arquivos Enviados em Armazenamento Externo" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" +"Salve os arquivos de impressão iniciados no Bambu Studio, Bambu Handy e " +"MakerWorld em Armazenamento Externo" + msgid "Allow Prompt Sound" msgstr "Permitir som de alerta" msgid "Filament Tangle Detect" msgstr "Detecção de emaranhado de filamento" -msgid "Nozzle Clumping Detection" -msgstr "Detecção de acúmulo no bico" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Verifica se o bico está com filamento acumulado ou outros objetos estranhos." msgid "Nozzle Type" -msgstr "Tipo de bico" +msgstr "Tipo de Bico" -msgid "Stainless Steel" -msgstr "Aço inoxidável" +msgid "Nozzle Flow" +msgstr "Fluxo do Bico" + +msgid "Please change the nozzle settings on the printer." +msgstr "Altere as configurações de bico na impressora." + +msgid "View wiki" +msgstr "Ver wiki" msgid "Hardened Steel" -msgstr "Aço endurecido" +msgstr "Aço Endurecido" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Aço Inoxidável" + +msgid "Tungsten Carbide" +msgstr "Carbeto de Tungstênio" + +msgid "High flow" +msgstr "Alto fluxo" + +msgid "No wiki link available for this printer." +msgstr "Não há link wiki disponível para esta impressora." msgid "Global" msgstr "Global" @@ -5865,41 +6868,71 @@ msgid "Advance" msgstr "Avançado" msgid "Compare presets" -msgstr "Comparar presets" +msgstr "Comparar predefinições" msgid "View all object's settings" msgstr "Ver todas as configurações do objeto" msgid "Material settings" -msgstr "" +msgstr "Configurações de material" msgid "Remove current plate (if not last one)" -msgstr "Remover a mesa atual (se não for a última)" +msgstr "Remover a placa atual (se não for o última)" msgid "Auto orient objects on current plate" -msgstr "Orientar automaticamente os objetos na mesa atual" +msgstr "Orientar automaticamente os objetos na placa atual" msgid "Arrange objects on current plate" -msgstr "Organizar objetos na mesa atual" +msgstr "Organizar objetos na placa atual" msgid "Unlock current plate" -msgstr "Desbloquear a mesa atual" +msgstr "Destravar a placa atual" msgid "Lock current plate" -msgstr "Bloquear a mesa atual" +msgstr "Travar a placa atual" + +msgid "Filament grouping" +msgstr "Agrupamento de filamento" msgid "Edit current plate name" -msgstr "Editar nome da mesa atual" +msgstr "Editar nome da placa atual" msgid "Move plate to the front" -msgstr "" +msgstr "Mover placa para frente" msgid "Customize current plate" -msgstr "Personalizar a mesa atual" +msgstr "Personalizar a placa atual" + +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "O bico %s não pode imprimir %s." + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "Misturar %1% com %2% na impressão não é recomendado.\n" + +msgid " nozzle" +msgstr " bico" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" +"Não é recomendável imprimir os seguintes filamentos com %1%: %2%\n" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" +"Não é recomendável usar as seguintes combinações de bico e filamento:\n" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "%1% com %2%\n" #, boost-format msgid " plate %1%:" -msgstr " mesa %1%:" +msgstr " placa %1%:" msgid "Invalid name, the following characters are not allowed:" msgstr "Nome inválido, os seguintes caracteres não são permitidos:" @@ -5925,14 +6958,76 @@ msgstr "Tempo estimado" msgid "Filament changes" msgstr "Mudanças de filamento" +msgid "Set the number of AMS installed on the nozzle." +msgstr "Defina o número do AMS instalado no bico." + +msgid "AMS(4 slots)" +msgstr "AMS (4 espaços)" + +msgid "AMS(1 slot)" +msgstr "AMS(1 espaço)" + +msgid "Not installed" +msgstr "Não instalado" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" +"O software não suporta o uso de bicos de diâmetros diferentes para uma mesma " +"impressão. Se os bicos esquerdo e direito forem incompatíveis, só é possível " +"prosseguir com a impressão com um único bico. Confirme qual bico você " +"gostaria de usar para este projeto." + +msgid "Switch diameter" +msgstr "Trocar diâmetro" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "Bico esquerdo: %smm" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "Bico direito: %smm" + +msgid "Sync printer information" +msgstr "Sincronizar informações da impressora" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" +"A configuração predefinida da máquina selecionada atualmente é incompatível " +"com o tipo de impressora conectada.\n" +"Tem certeza de que deseja continuar a sincronização?" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" +"Existem tipos de bico não configurados. Configure os tipos de bico de todas " +"as extrusoras antes de sincronizar." + +msgid "Sync extruder infomation" +msgstr "Sincronizar informações da extrusora" + msgid "Click to edit preset" -msgstr "Clique para editar o preset" +msgstr "Clique para editar predefinição" msgid "Connection" msgstr "Conexão" -msgid "Bed type" -msgstr "Tipo de mesa" +msgid "Sync info" +msgstr "Sincronizar informações" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "Sincronizar informações do bico e o número de AMS" + +msgid "Project Filaments" +msgstr "Filamentos do Projeto" msgid "Flushing volumes" msgstr "Volumes de Purga" @@ -5950,51 +7045,41 @@ msgid "Set filaments to use" msgstr "Definir filamentos para usar" msgid "Search plate, object and part." -msgstr "Pesquisar mesa, objeto e peça." +msgstr "Pesquisar placa, objeto e peça." msgid "Pellets" -msgstr "" +msgstr "Pellets" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Sem filamentos AMS. Por favor, selecione uma impressora na página " -"'Dispositivo' para carregar informações AMS." +"Após a conclusão da sua operação, o projeto %s será encerrado e um novo " +"projeto será criado." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Não há filamentos compatíveis, e a sincronização não é realizada." msgid "Sync filaments with AMS" msgstr "Sincronizar filamentos com AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or uncompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Sincronizar filamentos com AMS eliminará todas os presets de filamento e " -"cores selecionadas atualmente. Deseja continuar?" +"Existem alguns filamentos desconhecidos ou incompatíveis mapeados para " +"predefinições genéricas.\n" +"Atualize ou reinicie o Snapmaker Orca para verificar se há alguma atualização " +"para as predefinições do sistema." msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Já foi feita uma sincronização, deseja sincronizar apenas as alterações ou " -"ressincronizar tudo?" - -msgid "Sync" -msgstr "Sincronizar" - -msgid "Resync" -msgstr "Ressincronizar" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Não há filamentos compatíveis, e a sincronização não é realizada." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Alguns filamentos desconhecidos foram mapeados para preset genérico. Por " -"favor, atualize o Snapmaker Orca ou reinicie o Snapmaker Orca para verificar se há " -"uma atualização para presets do sistema." +"As informações sobre o tipo e a cor do filamento foram sincronizadas, " +"mas as informações sobre o slot não estão incluídas." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6002,15 +7087,15 @@ msgstr "Deseja salvar as alterações em \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" -"Desmontado com sucesso. O dispositivo %s(%s) agora pode ser removido com " +"Desmontado com sucesso. O dispositivo %s (%s) agora pode ser removido com " "segurança do computador." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "A ejeção do dispositivo %s(%s) falhou." +msgid "Ejecting of device %s (%s) has failed." +msgstr "A ejeção do dispositivo %s (%s) falhou." msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Projeto não salvo anterior detectado, deseja restaurá-lo?" @@ -6023,18 +7108,18 @@ msgid "" "clogged when printing this filament in a closed enclosure. Please open the " "front door and/or remove the upper glass." msgstr "" -"A temperatura atual da mesa aquecida está relativamente alta. A boquilha " -"pode ficar obstruída ao imprimir este filamento em um compartimento fechado. " -"Por favor, abra a porta frontal e/ou remova o vidro superior." +"A temperatura atual da mesa aquecida está relativamente alta. O bico pode " +"ficar obstruído ao imprimir este filamento em um compartimento fechado. Por " +"favor, abra a porta frontal e/ou remova o vidro superior." msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"A dureza do bico necessária pelo filamento é maior do que a dureza padrão do " -"bico da impressora. Por favor, substitua a boquilha endurecida ou o " -"filamento, caso contrário, a boquilha será desgastada ou danificada." +"A dureza do bico necessária para o filamento é maior do que a dureza padrão " +"do bico da impressora. Por favor substitua o bico endurecido ou o filamento, " +"caso contrário o bico será desgastado ou danificado." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " @@ -6043,29 +7128,57 @@ msgstr "" "A habilitação da fotografia tradicional em timelapse pode causar " "imperfeições na superfície. É recomendado mudar para o modo suave." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" +"O modo suave para timelapse está ativado, mas a torre de preparação está " +"desativada, o que pode causar defeitos na impressão. Ative a torre de " +"preparação, fatie novamente e imprima de novo." + msgid "Expand sidebar" msgstr "Expandir barra lateral" msgid "Collapse sidebar" msgstr "Recolher barra lateral" +msgid "Tab" +msgstr "Tab" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Carregando arquivo: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -"O 3mf não é suportado pelo Snapmaker Orca, carregar apenas dados de geometria." +"O 3MF não é suportado pelo Snapmaker Orca, carregando apenas dados de geometria." -msgid "Load 3mf" -msgstr "Carregar 3mf" +msgid "Load 3MF" +msgstr "Carregar 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" +"Este projeto foi criado com um Snapmaker Orca 2.3.1-alpha e usa configurações de " +"gabarito de rotação de preenchimento que podem não funcionar corretamente " +"com o seu padrão de preenchimento atual. Isso pode resultar em suporte fraco " +"ou problemas de qualidade de impressão." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Você gostaria que o Snapmaker Orca corrigisse isso automaticamente limpando as " +"configurações do gabarito de rotação?" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" -"A versão %s do 3mf é mais recente do que a versão %s do %s, encontradas as " +"A versão do 3MF %s é mais recente do que a versão do %s %s, encontradas as " "seguintes chaves não reconhecidas:" msgid "You'd better upgrade your software.\n" @@ -6073,48 +7186,57 @@ msgstr "Será melhor atualizar o seu software.\n" #, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"A versão %s do 3mf é mais recente do que a versão %s do %s, sugerimos " +"A versão do 3MF %s é mais recente do que a versão do %s %s, sugerimos " "atualizar seu software." -msgid "Invalid values found in the 3mf:" -msgstr "Valores inválidos encontrados no 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"O arquivo 3MF foi gerado por uma versão antiga do Snapmaker Orca, carregando " +"apenas dados de geometria." + +msgid "Invalid values found in the 3MF:" +msgstr "Valores inválidos encontrados no 3MF:" msgid "Please correct them in the param tabs" msgstr "Por favor, corrija-os nas guias de parâmetros" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"O 3mf possui os seguintes G-codes modificados em presets de filamento ou " -"impressora:" +"O 3MF tem os seguintes G-code modificados em predefinições de filamento " +"ou impressora:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" -"Por favor, confirme se esses G-codes modificados são seguros para evitar " +"Por favor, confirme se esses G-code modificados são seguros para evitar " "qualquer dano à máquina!" -msgid "Modified G-codes" -msgstr "G-codes modificados" +msgid "Modified G-code" +msgstr "G-code modificado" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" -"O 3mf possui os seguintes perfis de filamento ou impressora personalizados:" +"O 3MF tem as seguintes predefinições de filamento ou impressora " +"personalizadas:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Por favor, confirme se os G-codes dentro desses presets são seguros para " +"Por favor, confirme se o G-code dentro dessas predefinições é seguro para " "evitar qualquer dano à máquina!" msgid "Customized Preset" -msgstr "Perfil Personalizado" +msgstr "Predefinição Personalizada" -msgid "Name of components inside step file is not UTF8 format!" +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "" "O nome dos componentes dentro do arquivo STEP não está no formato UTF-8!" @@ -6166,15 +7288,29 @@ msgstr "Carregar esses arquivos como um único objeto com múltiplas peças?\n" msgid "Object with multiple parts was detected" msgstr "Objeto com múltiplas peças foi detectado" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" +"A impressora conectada é %s. Ela deve corresponder à predefinição do " +"projeto para impressão.\n" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" +"Deseja sincronizar as informações da impressora e alternar automaticamente " +"a predefinição?" + msgid "The file does not contain any geometry data." msgstr "O arquivo não contém dados de geometria." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Seu objeto parece ser muito grande. Deseja dimensioná-lo para caber na mesa " -"de aquecimento automaticamente?" +"de impressão automaticamente?" msgid "Object too large" msgstr "Objeto muito grande" @@ -6235,6 +7371,34 @@ msgstr "Selecione um novo arquivo" msgid "File for the replace wasn't selected" msgstr "O arquivo para a substituição não foi selecionado" +msgid "Select folder to replace from" +msgstr "Selecione a pasta origem da substituição" + +msgid "Directory for the replace wasn't selected" +msgstr "Diretório para substituição não foi selecionado" + +msgid "Replaced with STLs from directory:\n" +msgstr "Substituído com STLs do diretório:\n" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "✖ %1% Ignorados: mesmo arquivo.\n" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "✖ %1% Ignorados: arquivo não existe.\n" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "✖ %1% Ignorados: falha ao substituir.\n" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "✔ %1% Substituídos.\n" + +msgid "Replaced volumes" +msgstr "Volumes substiruídos" + msgid "Please select a file" msgstr "Por favor, selecione um arquivo" @@ -6267,7 +7431,7 @@ msgstr "Fatiamento Cancelado" #, c-format, boost-format msgid "Slicing Plate %d" -msgstr "Fatiando Mesa %d" +msgstr "Fatiando Placa %d" msgid "Please resolve the slicing errors and publish again." msgstr "Por favor, resolva os erros de fatiamento e publique novamente." @@ -6280,15 +7444,31 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" -"Modo somente de visualização:\n" -"O arquivo carregado contém apenas código G, não é possível acessar a página " -"de Preparação" +"Modo de pré-visualização apenas:\n" +"O arquivo carregado contém apenas G-code, não é possível acessar a página de " +"Preparação." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" +"As informações sobre o tipo de bico e a quantidade de AMS não foram " +"sincronizadas com a impressora conectada.\n" +"Após a sincronização, o software poderá otimizar o tempo de impressão e o " +"uso de filamento durante o fatiamento.\n" +"Deseja sincronizar agora?" + +msgid "Sync now" +msgstr "Sincronizar agora" msgid "You can keep the modified presets to the new project or discard them" msgstr "" -"Você pode manter os presets modificados no novo projeto ou descartá-los" +"Você pode manter as predefinições modificadas no novo projeto ou descartá-las" msgid "Creating a new project" msgstr "Criando um novo projeto" @@ -6311,14 +7491,14 @@ msgstr "Salvar Projeto" msgid "Importing Model" msgstr "Importando Modelo" -msgid "prepare 3mf file..." -msgstr "preparar o arquivo 3mf..." +msgid "prepare 3MF file..." +msgstr "preparar o arquivo 3MF…" msgid "Download failed, unknown file format." msgstr "Baixar falhou, formato de arquivo desconhecido." -msgid "downloading project ..." -msgstr "baixando projeto..." +msgid "downloading project..." +msgstr "baixando projeto…" msgid "Download failed, File size exception." msgstr "Baixar falhou, erro no tamanho do arquivo." @@ -6331,20 +7511,33 @@ msgid "" "Importing to Snapmaker Orca failed. Please download the file and manually " "import it." msgstr "" -"A importação para a Snapmaker Orca falhou. Por favor, baixe o arquivo e importe " +"A importação para o Snapmaker Orca falhou. Por favor, baixe o arquivo e importe " "manualmente." +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Nenhuma aceleração fornecida para calibração. Usar o valor de aceleração " +"padrão " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Nenhuma velocidade fornecida para calibração. Usar a velocidade padrão " + msgid "Import SLA archive" msgstr "Importar arquivo SLA" msgid "The selected file" msgstr "O arquivo selecionado" -msgid "does not contain valid gcode." -msgstr "não contém código G válido." +msgid "does not contain valid G-code." +msgstr "não contém G-code válido." msgid "Error occurs while loading G-code file" -msgstr "Erro ocorreu ao carregar o arquivo de código G" +msgstr "Erro ocorreu ao carregar o arquivo de G-code" #. TRN %1% is archive path #, boost-format @@ -6375,16 +7568,16 @@ msgid "Import geometry only" msgstr "Importar apenas a geometria" msgid "Only one G-code file can be opened at the same time." -msgstr "Apenas um arquivo de código G pode ser aberto de cada vez." +msgstr "Apenas um arquivo de G-code pode ser aberto de cada vez." msgid "G-code loading" msgstr "Carregamento do G-code" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Arquivos de G-code não podem ser carregados junto com modelos!" -msgid "Can not add models when in preview mode!" -msgstr "Não é possível adicionar modelos no modo de visualização!" +msgid "Cannot add models when in preview mode!" +msgstr "Não é possível adicionar modelos no modo de pré-visualização!" msgid "All objects will be removed, continue?" msgstr "Todos os objetos serão removidos, continuar?" @@ -6399,7 +7592,7 @@ msgid "Copies of the selected object" msgstr "Cópias do objeto selecionado" msgid "Save G-code file as:" -msgstr "Salvar arquivo de código G como:" +msgstr "Salvar arquivo de G-code como:" msgid "Save SLA file as:" msgstr "Salvar arquivo SLA como:" @@ -6422,11 +7615,18 @@ msgstr "" "O arquivo %s foi enviado para o espaço de armazenamento da impressora e pode " "ser visualizado na impressora." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" +"O tipo de bico não está configurado. Configure o bico e tente novamente." + +msgid "The nozzle type is not set. Please check." +msgstr "O tipo de bico não está configurado. Verifique." + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Não é possível executar a operação booleana em malhas de modelo. Somente " +"Não é possível executar a operação booleana em malhas de modelo. Apenas " "partes positivas serão mantidas. Você pode consertar as malhas e tentar " "novamente." @@ -6450,18 +7650,8 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Você tem certeza de que deseja armazenar os SVGs originais com seus caminhos " -"locais no arquivo 3MF?\n" -"Se pressionar 'NÃO', todos os SVGs no projeto não serão mais editáveis." - -msgid "Private protection" -msgstr "Proteção privada" +"Não é possível executar operação booleana em malhas de modelo. Apenas partes " +"positivas serão exportadas." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" @@ -6470,6 +7660,9 @@ msgstr "" msgid "Upload and Print" msgstr "Enviar e Imprimir" +msgid "Abnormal print file data. Please slice again" +msgstr "Dados de arquivo de impressão anormais. Por favor, fatie novamente" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6491,11 +7684,45 @@ msgstr "" msgid "Optimize Rotation" msgstr "Otimizar Rotação" -msgid "Invalid number" -msgstr "Número inválido" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" +"Impressora não conectada. Acesse a página do dispositivo para conectar %s " +"antes de sincronizar." + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" +"A impressora atualmente conectada na página do dispositivo não é %s. " +"Selecione %s antes de sincronizar." + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" +"Não há filamentos na impressora. Carregue os filamentos na impressora " +"primeiro." + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" +"Os filamentos na impressora são todos de tipos desconhecidos. Acesse a tela " +"da impressora ou a página do software do dispositivo para definir o tipo de " +"filamento." + +msgid "Device Page" +msgstr "Página do Dispositivo" + +msgid "Synchronize AMS Filament Information" +msgstr "Sincronizar informações de filamento AMS" msgid "Plate Settings" -msgstr "Configurações da Mesa" +msgstr "Configurações de Placa" #, boost-format msgid "Number of currently selected parts: %1%\n" @@ -6527,81 +7754,74 @@ msgstr "Volume: %1% pol³\n" #, boost-format msgid "Volume: %1% mm³\n" -msgstr "Volume: %1% mm3\n" +msgstr "Volume: %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" msgstr "Triângulos: %1%\n" -msgid "Tips:" -msgstr "Dicas:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" "A função \"Corrigir Modelo\" está atualmente disponível apenas no Windows. " -"Por favor, repare o modelo no Snapmaker Orca (Windows) ou softwares CAD." +"Por favor, conserte o modelo no Snapmaker Orca (Windows) ou softwares CAD." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Mesa %d: %s não é recomendada para ser usada para imprimir filamento %s(%s). " -"Se você ainda quiser fazer esta impressão, por favor, defina a temperatura " -"de mesa deste filamento para zero" +"Placa %d: %s não é sugerida para ser usado para imprimir filamento %s (%s). " +"Se você ainda quiser fazer esta impressão, por favor defina a temperatura de " +"mesa deste filamento para diferente de zero." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" +"Atualmente, o formulário de configuração de objetos não pode ser usado com " +"uma impressora de múltiplas extrusoras." + +msgid "Not available" +msgstr "Não disponível" + +msgid "isometric" +msgstr "isométrico" + +msgid "top_front" +msgstr "topo_frente" + +msgid "top" +msgstr "topo" + +msgid "bottom" +msgstr "fundo" + +msgid "front" +msgstr "frente" + +msgid "rear" +msgstr "trás" msgid "Switching the language requires application restart.\n" -msgstr "Mudar o idioma requer reiniciar o aplicativo.\n" +msgstr "Alternanr o idioma requer reiniciar o aplicativo.\n" msgid "Do you want to continue?" msgstr "Você deseja continuar?" msgid "Language selection" -msgstr "Seleção de Idioma" +msgstr "Seleção de idioma" msgid "Switching application language while some presets are modified." msgstr "" -"A mudança do idioma do aplicativo enquanto alguns presets estão modificados." +"Alternando idioma do aplicativo enquanto algumas predefinições são " +"modificadas." msgid "Changing application language" msgstr "Alterando o idioma do aplicativo" -msgid "Changing the region will log out your account.\n" -msgstr "Mudar a região fará logout da sua conta.\n" - -msgid "Region selection" -msgstr "Seleção de Região" - -msgid "Second" -msgstr "Segundo" - -msgid "Browse" -msgstr "Procurar" - -msgid "Choose Download Directory" -msgstr "Escolha o Diretório de Download" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "Configurações Gerais" - msgid "Asia-Pacific" msgstr "Ásia-Pacífico" @@ -6617,25 +7837,62 @@ msgstr "América do Norte" msgid "Others" msgstr "Outros" -msgid "Login Region" -msgstr "Região de Login" +msgid "Changing the region will log out your account.\n" +msgstr "Mudar a região fará logout da sua conta.\n" -msgid "Stealth Mode" -msgstr "Modo Oculto" +msgid "Region selection" +msgstr "Seleção de Região" + +msgid "sec" +msgstr "seg" + +msgid "The period of backup in seconds." +msgstr "O período de backup em segundos." + +msgid "Bed Temperature Difference Warning" +msgstr "Aviso de Diferença de Temperatura na Mesa" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Isso interrompe a transmissão de dados para os serviços de nuvem de Bambu. " -"Os usuários que não usam máquinas BBL ou usar modo LAN só podem ativar esta " -"função com segurança." +"O uso de filamentos com temperaturas significativamente diferentes pode causar:\n" +"• Entupimento da extrusora\n" +"• Danos ao bico\n" +"• Problemas de adesão entre as camadas\n" +"\n" +"Deseja continuar ativando este recurso?" -msgid "Enable network plugin" -msgstr "Ativar plugin de rede" +msgid "Browse" +msgstr "Procurar" -msgid "Check for stable updates only" -msgstr "Verificar apenas atualizações estáveis" +msgid "Choose folder for downloaded items" +msgstr "Escolha a pasta para itens baixados" + +msgid "Choose Download Directory" +msgstr "Escolha o Diretório de Download" + +msgid "Associate" +msgstr "Associar" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "com Snapmaker Orca para que Orca possa abrir modelos de" + +msgid "Current Association: " +msgstr "Associação Atual: " + +msgid "Current Instance" +msgstr "Instância Atual" + +msgid "Current Instance Path: " +msgstr "Caminho da Instância Atual: " + +msgid "General" +msgstr "Geral" msgid "Metric" msgstr "Métrico" @@ -6646,8 +7903,20 @@ msgstr "Imperial" msgid "Units" msgstr "Unidades" +msgid "Home" +msgstr "Início" + +msgid "Default page" +msgstr "Página padrão" + +msgid "Set the page opened on startup." +msgstr "Define a página aberta na inicialização." + +msgid "Enable dark mode" +msgstr "Ativar modo escuro" + msgid "Allow only one Snapmaker Orca instance" -msgstr "Permitir apenas uma instância Snapmaker Orca" +msgstr "Permitir apenas uma instância do Snapmaker Orca" msgid "" "On OSX there is always only one instance of app running by default. However " @@ -6667,14 +7936,114 @@ msgstr "" "do mesmo Snapmaker Orca já estiver em execução, essa instância será reativada em " "vez disso." -msgid "Home" -msgstr "Início" +msgid "Show splash screen" +msgstr "Mostrar tela de abertura" -msgid "Default Page" -msgstr "Página Padrão" +msgid "Show the splash screen during startup." +msgstr "Mostra a tela de abertura durante a inicialização." -msgid "Set the page opened on startup." -msgstr "Define a página aberta na inicialização." +msgid "Downloads folder" +msgstr "Pasta de itens baixados" + +msgid "Target folder for downloaded items" +msgstr "Pasta destino para itens baixados" + +msgid "Load All" +msgstr "Carregar Tudo" + +msgid "Ask When Relevant" +msgstr "Perguntar Quando Relevante" + +msgid "Always Ask" +msgstr "Perguntar Sempre" + +msgid "Load Geometry Only" +msgstr "Carregar Apenas Geometria" + +msgid "Load behaviour" +msgstr "Comportamento de carregamento" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"As configurações de impressora/filamento/processo devem ser carregadas ao " +"abrir um arquivo 3MF?" + +msgid "Maximum recent files" +msgstr "Máximo de arquivos recentes" + +msgid "Maximum count of recent files" +msgstr "Contagem máxima de arquivos recentes" + +msgid "Add STL/STEP files to recent files list" +msgstr "Adicionar arquivos de modelo STL/STEP à lista de arquivos recentes" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Sem avisos ao carregar 3MF com G-code modificado" + +msgid "Show options when importing STEP file" +msgstr "Mostrar opções ao importar arquivo STEP" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Se ativo, uma caixa de diálogo de configurações de parâmetros será exibida " +"durante a importação do arquivo STEP." + +msgid "Auto backup" +msgstr "Backup automático" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Faça backup do seu projeto periodicamente para restaurar de falhas " +"ocasionais." + +msgid "Preset" +msgstr "Predefinição" + +msgid "Remember printer configuration" +msgstr "Lembrar configuração da impressora" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Se ativo, Orca vai lembrar e alternar a configuração de filamento/processo " +"para cada impressora automaticamente." + +msgid "Features" +msgstr "Recursos" + +msgid "Multi device management" +msgstr "Gerenciamento de multi dispositivos" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Com esta opção habilitada, você pode enviar uma tarefa para vários " +"dispositivos ao mesmo tempo e gerenciar vários dispositivos." + +msgid "(Requires restart)" +msgstr "(Requer reinício)" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "Comportamento" + +msgid "All" +msgstr "Todos" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Organizar automaticamente a placa após a clonagem" msgid "Touchpad" msgstr "Touchpad" @@ -6688,9 +8057,17 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "Selecione o estilo de navegação da câmera.\n" -"Padrão: LMB + mover para rotacionar, RMB/MMB + mover para fazer pan.\n" +"Padrão: LMB+mover para rotacionar, RMB/MMB+mover para fazer pan.\n" "Touchpad: Alt+mover para rotacionar, Shift+mover para fazer pan." +msgid "Orbit speed multiplier" +msgstr "Multiplicador de velocidade de órbita" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" +"Multiplica a velocidade da órbita para um movimento de câmera mais fino ou " +"mais grosseiro." + msgid "Zoom to mouse position" msgstr "Zoom para a posição do mouse" @@ -6698,8 +8075,8 @@ msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Dar zoom em direção à posição do ponteiro do mouse na visualização 3D, em " -"vez do centro da janela 2D." +"Dar zoom em direção à posição do ponteiro do mouse na vista 3D, em vez do " +"centro da janela 2D." msgid "Use free camera" msgstr "Usar câmera livre" @@ -6707,143 +8084,124 @@ msgstr "Usar câmera livre" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Se ativado, usa câmera livre. Se não ativado, usa câmera restrita." +msgid "Swap pan and rotate mouse buttons" +msgstr "Alterar a panorâmica e girar os botões do mouse" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Se ativado, troca as funções de panorâmica e rotação dos botões esquerdo e " +"direito do mouse." + msgid "Reverse mouse zoom" msgstr "Inverter zoom do mouse" msgid "If enabled, reverses the direction of zoom with mouse wheel." -msgstr "Se ativo, inverte a direção de zoom com o mouse" +msgstr "Se ativo, inverte a direção de zoom com a roda do mouse." -msgid "Show splash screen" -msgstr "Mostrar tela de abertura" - -msgid "Show the splash screen during startup." -msgstr "Mostra a tela de abertura durante a inicialização." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Mostrar notificação \"Dica do dia\" após o início" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Se ativado, dicas úteis são exibidas na inicialização." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Volumes de Purga: Auto-calcular toda vez que a cor mudar." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Se ativado, auto-calcular toda vez que a cor mudar." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Volumes de Purga: Auto-calcular toda vez que a cor mudar." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "Se ativo, auto-calcular toda vez que a cor mudar" - -msgid "Remember printer configuration" -msgstr "Lembrar configuração da impressora" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +msgid "Clear my choice on..." msgstr "" -"Se ativo, Orca vai lembrar e alternar a configuração de filamento/processo " -"para cada impressora automaticamente." -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" -"Gerenciamento de multi-dispositivos(Entra em vigor após reiniciar o Orca)." - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"Com esta opção habilitada, você pode enviar uma tarefa para vários " -"dispositivos ao mesmo tempo e gerenciar vários dispositivos." - -msgid "Network" -msgstr "Rede" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Sincronização automática de presets do usuário(Impressora/Filamento/Processo)" - -msgid "User Sync" -msgstr "Sincronização do Usuário" - -msgid "Update built-in Presets automatically." -msgstr "Atualizar presets integrados automaticamente." - -msgid "System Sync" -msgstr "Sincronização do Sistema" - -msgid "Clear my choice on the unsaved presets." -msgstr "Limpar minha escolha nos presets não salvos." - -msgid "Associate files to Snapmaker Orca" -msgstr "Associar arquivos ao Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Associar arquivos .3mf ao Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "" -"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos .3mf" - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Associar arquivos .stl ao Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "" -"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos .stl" - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Associar arquivos .step/.stp ao Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "" -"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos ." -"step" - -msgid "Associate web links to Snapmaker Orca" -msgstr "Associar links da web ao Snapmaker Orca" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "Associar URLs ao Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Máximo de projetos recentes" - -msgid "Maximum count of recent projects" -msgstr "Contagem máxima de projetos recentes" +msgid "Unsaved projects" +msgstr "Projetos não salvos" msgid "Clear my choice on the unsaved projects." msgstr "Limpar minha escolha nos projetos não salvos." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Sem avisos ao carregar 3MF com códigos G modificados" +msgid "Unsaved presets" +msgstr "Predefinições não salvas" -msgid "Auto-Backup" -msgstr "Backup Automático" +msgid "Clear my choice on the unsaved presets." +msgstr "Limpar minha escolha nas predefinições não salvas." + +msgid "Synchronizing printer preset" +msgstr "Sincronizando predefinição da impressora" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Faça backup do seu projeto periodicamente para restaurar de falhas " -"ocasionais." +"Limpar minha opção de sincronização da predefinição da impressora após " +"carregar o arquivo." -msgid "every" -msgstr "cada" +msgid "Login region" +msgstr "Região de login" -msgid "The peroid of backup in seconds." -msgstr "O período de backup em segundos." +msgid "Stealth mode" +msgstr "Modo oculto" -msgid "Downloads" -msgstr "Downloads" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Isso interrompe a transmissão de dados para os serviços de nuvem de Bambu. " +"Os usuários que não usam máquinas BBL ou usar modo LAN só podem ativar esta " +"função com segurança." -msgid "Dark Mode" -msgstr "Modo Escuro" +msgid "Network test" +msgstr "Teste de Rede" -msgid "Enable Dark mode" -msgstr "Ativar Modo Escuro" +msgid "Test" +msgstr "Testar" + +msgid "Update & sync" +msgstr "Atualizar e sincronizar" + +msgid "Check for stable updates only" +msgstr "Verificar apenas atualizações estáveis" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Sincronização automática de predefinições do usuário (Impressora/Filamento/" +"Processo)" + +msgid "Update built-in Presets automatically." +msgstr "Atualizar automaticamente Predefinições integradas." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Ativar plugin de rede" + +msgid "Use legacy network plugin" +msgstr "Usar o plugin de rede legado" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" +"Desabilitar para usar o plugin de rede mais recente que suporta novos " +"firmwares BambuLab." + +msgid "Associate files to Snapmaker Orca" +msgstr "Associar arquivos ao Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Associar arquivos 3MF ao Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "" +"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos 3MF." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Associar arquivos STL ao Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "" +"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos STL." + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Associar arquivos STEP ao Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "" +"Se ativado, define Snapmaker Orca como aplicativo padrão para abrir arquivos " +"STEP." + +msgid "Associate web links to Snapmaker Orca" +msgstr "Associar links da web ao Snapmaker Orca" + +msgid "Developer" +msgstr "Desenvolvedor" msgid "Develop mode" msgstr "Modo de Desenvolvimento" @@ -6851,50 +8209,25 @@ msgstr "Modo de Desenvolvimento" msgid "Skip AMS blacklist check" msgstr "Pular verificação de lista negra AMS" -msgid "Home page and daily tips" -msgstr "Página inicial e dicas diárias" +msgid "Remove mixed temperature restriction" +msgstr "Remover restrição de temperatura mista" -msgid "Show home page on startup" -msgstr "Mostrar página inicial na inicialização" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" +"Com essa opção ativada, você pode imprimir materiais com uma grande " +"diferença de temperatura simultaneamente." -msgid "Sync settings" -msgstr "Sincronizar configurações" +msgid "Allow Abnormal Storage" +msgstr "Permitir Armazenamento Anormal" -msgid "User sync" -msgstr "Sincronização do usuário" - -msgid "Preset sync" -msgstr "Sincronização de preset" - -msgid "Preferences sync" -msgstr "Sincronização de preferências" - -msgid "View control settings" -msgstr "Configurações de controle de visualização" - -msgid "Rotate of view" -msgstr "Rotação da visualização" - -msgid "Move of view" -msgstr "Movimento da visualização" - -msgid "Zoom of view" -msgstr "Zoom da visualização" - -msgid "Other" -msgstr "Outro" - -msgid "Mouse wheel reverses when zooming" -msgstr "O botão de roda do mouse inverte ao fazer zoom" - -msgid "Enable SSL(MQTT)" -msgstr "Ativar SSL(MQTT)" - -msgid "Enable SSL(FTP)" -msgstr "Ativar SSL(FTP)" - -msgid "Internal developer mode" -msgstr "Modo de desenvolvedor interno" +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" +"Isso permite o uso de armazenamento marcado como anormal pela impressora.\n" +"Use por sua conta e risco, pode causar problemas!" msgid "Log Level" msgstr "Nível de log" @@ -6914,6 +8247,48 @@ msgstr "depurar" msgid "trace" msgstr "traço" +msgid "Debug" +msgstr "Depuração" + +msgid "Sync settings" +msgstr "Sincronizar configurações" + +msgid "User sync" +msgstr "Sincronização do usuário" + +msgid "Preset sync" +msgstr "Sincronização de predefinição" + +msgid "Preferences sync" +msgstr "Sincronização de preferências" + +msgid "View control settings" +msgstr "Configurações de controle de vista" + +msgid "Rotate of view" +msgstr "Rotação da vista" + +msgid "Move of view" +msgstr "Movimento da vista" + +msgid "Zoom of view" +msgstr "Zoom da vista" + +msgid "Other" +msgstr "Outro" + +msgid "Mouse wheel reverses when zooming" +msgstr "O botão de roda do mouse inverte ao fazer zoom" + +msgid "Enable SSL(MQTT)" +msgstr "Ativar SSL(MQTT)" + +msgid "Enable SSL(FTP)" +msgstr "Ativar SSL(FTP)" + +msgid "Internal developer mode" +msgstr "Modo de desenvolvedor interno" + msgid "Host Setting" msgstr "Configuração de host" @@ -6935,38 +8310,53 @@ msgstr "botão de salvar depuração" msgid "save debug settings" msgstr "salvar configurações de depuração" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "As configurações de depuração foram salvas com sucesso!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Mudar o ambiente de nuvem, Por favor, faça login novamente!" msgid "System presets" -msgstr "Presets do sistema" +msgstr "Predefinições do sistema" msgid "User presets" -msgstr "Presets do usuário" +msgstr "Predefinições do usuário" msgid "Incompatible presets" -msgstr "Presets incompatíveis" +msgstr "Predefinições incompatíveis" + +msgid "My Printer" +msgstr "Minha Impressora" + +msgid "Left filaments" +msgstr "Filamentos da esquerda" msgid "AMS filaments" msgstr "Filamentos AMS" -msgid "Click to pick filament color" -msgstr "Clique para escolher a cor do filamento" +msgid "Right filaments" +msgstr "Filamentos da direita" -msgid "Please choose the filament colour" -msgstr "Por favor, escolha a cor do filamento" +msgid "Click to select filament color" +msgstr "Clique para selecionar a cor do filamento" msgid "Add/Remove presets" -msgstr "Adicionar/Remover presets" +msgstr "Adicionar/Remover predefinições" msgid "Edit preset" -msgstr "Editar preset" +msgstr "Editar predefinições" msgid "Project-inside presets" -msgstr "Presets dentro do projeto" +msgstr "Predefinições dentro do projeto" + +msgid "System" +msgstr "Sistema" + +msgid "Unsupported presets" +msgstr "Predefinições não suportadas" + +msgid "Unsupported" +msgstr "Não suportado" msgid "Add/Remove filaments" msgstr "Adicionar/Remover filamentos" @@ -6974,14 +8364,20 @@ msgstr "Adicionar/Remover filamentos" msgid "Add/Remove materials" msgstr "Adicionar/Remover materiais" -msgid "Select/Remove printers(system presets)" -msgstr "Selecionar/Remover impressoras (presets do sistema)" +msgid "Select/Remove printers (system presets)" +msgstr "Selecionar/Remover impressoras (predefinições do sistema)" msgid "Create printer" msgstr "Criar impressora" +msgid "Empty" +msgstr "Vazio" + +msgid "Incompatible" +msgstr "Incompatível" + msgid "The selected preset is null!" -msgstr "O preset selecionada é nulo!" +msgstr "A predefinição selecionada é nula!" msgid "End" msgstr "Fim" @@ -6993,10 +8389,16 @@ msgid "Other layer filament sequence" msgstr "Sequência de filamento de outra camada" msgid "Please input layer value (>= 2)." -msgstr "Por favor, insira o valor da camada (>= 2)." +msgstr "Por favor insira o valor da camada (>= 2)." msgid "Plate name" -msgstr "Nome da mesa" +msgstr "Nome da placa" + +msgid "Same as Global Plate Type" +msgstr "Mesmo que o Tipo de Placa Global" + +msgid "Bed type" +msgstr "Tipo de placa" msgid "Same as Global Print Sequence" msgstr "Mesmo que a Sequência Global de Impressão" @@ -7016,17 +8418,14 @@ msgstr "Vaso espiral" msgid "First layer filament sequence" msgstr "Sequência de filamento da primeira camada" -msgid "Same as Global Plate Type" -msgstr "Mesmo que o Tipo de Mesa Global" - msgid "Same as Global Bed Type" msgstr "Mesmo que o Tipo de Mesa Global" msgid "By Layer" -msgstr "Por camada" +msgstr "Por Camada" msgid "By Object" -msgstr "Por objeto" +msgstr "Por Objeto" msgid "Accept" msgstr "Aceitar" @@ -7035,32 +8434,32 @@ msgid "Log Out" msgstr "Sair" msgid "Slice all plate to obtain time and filament estimation" -msgstr "Fatiar todas as mesas para obter estimativa de tempo e filamento" +msgstr "Fatiar todas as placas para obter estimativa de tempo e filamento" -msgid "Packing project data into 3mf file" -msgstr "Empacotando dados do projeto em arquivo 3mf" +msgid "Packing project data into 3MF file" +msgstr "Empacotando dados do projeto em arquivo 3MF" -msgid "Uploading 3mf" -msgstr "Carregando 3mf" +msgid "Uploading 3MF" +msgstr "Enviando 3MF" msgid "Jump to model publish web page" msgstr "Ir para a página web de publicação de modelos" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Nota: A preparação pode levar vários minutos. Por favor, seja paciente." msgid "Publish" msgstr "Publicar" -msgid "Publish was cancelled" -msgstr "A publicação foi cancelada" +msgid "Publish was canceled" +msgstr "Publicação cancelada" msgid "Slicing Plate 1" -msgstr "Fatiando mesa 1" +msgstr "Fatiando Placa 1" -msgid "Packing data to 3mf" -msgstr "Empacotando dados em 3mf" +msgid "Packing data to 3MF" +msgstr "Empacotando dados em 3MF" msgid "Jump to webpage" msgstr "Ir para a página web" @@ -7070,33 +8469,35 @@ msgid "Save %s as" msgstr "Salvar %s como" msgid "User Preset" -msgstr "Preset do usuário" +msgstr "Predefinição do Usuário" msgid "Preset Inside Project" -msgstr "Preset dentro do projeto" +msgstr "Predefinição Dentro do Projeto" msgid "Name is unavailable." msgstr "O nome não está disponível." -msgid "Overwrite a system profile is not allowed" -msgstr "Sobrescrever um perfil de sistema não é permitido" +msgid "Overwriting a system profile is not allowed." +msgstr "Sobrescrever um perfil de sistema não é permitido." #, boost-format msgid "Preset \"%1%\" already exists." -msgstr "O perfil \"%1%\" já existe." +msgstr "A predefinição \"%1%\" já existe." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "O perfil \"%1%\" já existe e é incompatível com a impressora atual." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." +msgstr "" +"A predefinição \"%1%\" já existe e é incompatível com a impressora atual." -msgid "Please note that saving action will replace this preset" -msgstr "Por favor, note que a ação de salvar substituirá este perfil" +msgid "Please note that saving will overwrite this preset." +msgstr "Por favor, note que a ação de salvar sobrescreverá esta predefinição." msgid "The name cannot be the same as a preset alias name." -msgstr "O nome não pode ser o mesmo que um nome de alias de perfil." +msgstr "O nome não pode ser o mesmo que um nome de alias de predefinição." msgid "Save preset" -msgstr "Salvar perfil" +msgstr "Salvar predefinição" msgctxt "PresetName" msgid "Copy" @@ -7104,11 +8505,12 @@ msgstr "Cópia" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "A impressora \"%1%\" está selecionada com o perfil \"%2%\"" +msgstr "A impressora \"%1%\" está selecionada com a predefinição \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "Por favor, escolha uma ação com o perfil \"%1%\" após salvar." +msgstr "" +"Por favor, escolha uma ação com a predefinição \"%1%\" após o salvamento." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " @@ -7116,7 +8518,7 @@ msgstr "Para \"%1%\", mude \"%2%\" para \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "Para \"%1%\", adicione \"%2%\" como um novo perfil" +msgstr "Para \"%1%\", adicione \"%2%\" como uma nova predefinição" #, boost-format msgid "Simply switch to \"%1%\"" @@ -7125,59 +8527,84 @@ msgstr "Simplesmente mude para \"%1%\"" msgid "Task canceled" msgstr "Tarefa cancelada" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Buscar" - -msgid "My Device" -msgstr "Meu dispositivo" - -msgid "Other Device" -msgstr "Outro dispositivo" - -msgid "Online" -msgstr "Disponível" - -msgid "Input access code" -msgstr "Digite o código de acesso" - -msgid "Can't find my devices?" -msgstr "Não consegue encontrar meus dispositivos?" - -msgid "Log out successful." -msgstr "Sessão encerrada com sucesso." - -msgid "Busy" -msgstr "Ocupado" - msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate (Mesa Fria)" +msgstr "Placa Fria Bambu" msgid "PLA Plate" -msgstr "Mesa PLA" +msgstr "Placa PLA" msgid "Bambu Engineering Plate" -msgstr "Mesa de Engenharia Bambu" +msgstr "Placa de Engenharia Bambu" msgid "Bambu Smooth PEI Plate" -msgstr "Mesa de PEI Lisa Bambu" +msgstr "Placa de PEI Lisa Bambu" msgid "High temperature Plate" -msgstr "Mesa de Alta Temperatura" +msgstr "Placa de Alta Temperatura" msgid "Bambu Textured PEI Plate" -msgstr "Mesa Texturizada PEI Bambu" +msgstr "Placa PEI Texturizada Bambu" -msgid "Send print job to" -msgstr "Enviar trabalho de impressão para" +msgid "Bambu Cool Plate SuperTack" +msgstr "Placa Fria Bambu SuperTack" + +msgid "Send print job" +msgstr "Enviar trabalho de impressão" + +msgid "On" +msgstr "Ligado" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "Insatisfeito com o agrupamento dos filamentos? Reagrupe e fatie ->" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" +"Trocar manualmente o carretel externo durante a impressão para impressão " +"multicor" + +msgid "Multi-color with external" +msgstr "Multicor com externo" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" +"Seu método de agrupamento de filamentos no arquivo fatiado não é o ideal." + +msgid "Auto Bed Leveling" +msgstr "Nivelamento Automático da Mesa" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" +"Isso verifica a planicidade da mesa aquecida. O nivelamento uniformiza a " +"altura de extrusão.\n" +"*Modo automático: Executa uma verificação de nivelamento (cerca de 10 " +"segundos). Pule se a superfície estiver perfeita." msgid "Flow Dynamics Calibration" msgstr "Calibração de Dinâmica de Fluxo" -msgid "Click here if you can't connect to the printer" -msgstr "Clique aqui se não conseguir conectar-se à impressora" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" +"Este processo determina os valores de fluxo dinâmico para melhorar a " +"qualidade geral de impressão.\n" +"*Modo automático: Pule se o filamento foi calibrado recentemente." + +msgid "Nozzle Offset Calibration" +msgstr "Calibração do Deslocamento do Bico" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" +"Calibre os offsets dos bicos para melhorar a qualidade de impressão.\n" +"*Modo automático: Verifique a calibração antes de imprimir. Pule se for " +"desnecessário." msgid "send completed" msgstr "enviado completo" @@ -7185,109 +8612,44 @@ msgstr "enviado completo" msgid "Error code" msgstr "Código de erro" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Sem conta de login, apenas as impressoras em modo LAN são exibidas" - -msgid "Connecting to server" -msgstr "Conectando ao servidor" - -msgid "Synchronizing device information" -msgstr "Sincronizando informações do dispositivo" - -msgid "Synchronizing device information time out" -msgstr "Tempo limite de sincronização das informações do dispositivo" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"Não é possível enviar o trabalho de impressão quando a impressora está " -"atualizando o firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"A impressora está executando instruções. Por favor, reinicie a impressão " -"após terminar" - -msgid "The printer is busy on other print job" -msgstr "A impressora está ocupada com outro trabalho de impressão" +msgid "High Flow" +msgstr "Alto Fluxo" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"O filamento %s excede o número de slots AMS. Por favor, atualize o firmware " -"da impressora para suportar a atribuição de slots AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"O filamento excede o número de slots AMS. Por favor, atualize o firmware da " -"impressora para suportar a atribuição de slots AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Foram estabelecidos mapeamentos de filamentos para slots AMS. Você pode " -"clicar em um filamento acima para mudar seu slot AMS mapeado" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Por favor, clique em cada filamento acima para especificar seu slot AMS " -"mapeado antes de enviar o trabalho de impressão" +"A configuração de fluxo do bico %s(%s) não corresponde ao arquivo de " +"fatiamento(%s). Certifique-se de que o bico instalado corresponde às " +"configurações da impressora, então defina a predefinição de impressora " +"correspondente durante o fatiamento." #, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" -"O filamento %s não corresponde ao filamento no slot AMS %s. Por favor, " -"atualize o firmware da impressora para suportar a atribuição de slots AMS." +"O filamento %s não corresponde ao filamento no espaço do AMS %s. Atualize o " +"firmware da impressora para suportar a atribuição de espaços do AMS." msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" -"O filamento não corresponde ao filamento no slot AMS. Por favor, atualize o " -"firmware da impressora para suportar a atribuição de slots AMS." - -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"O firmware da impressora só suporta mapeamento sequencial de filamento => " -"slot AMS." - -msgid "An SD card needs to be inserted before printing." -msgstr "Um cartão SD precisa ser inserido antes de imprimir." +"O filamento não corresponde ao filamento no espaço do AMS. Atualize o " +"firmware da impressora para suportar a atribuição de espaços do AMS." #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"A impressora selecionada (%s) é incompatível com o perfil escolhido de " -"impressora no fatiador (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Um cartão SD precisa ser inserido para gravar o timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Não é possível enviar o trabalho de impressão para uma impressora cujo " -"firmware precisa ser atualizado." - -msgid "Cannot send the print job for empty plate" -msgstr "Não é possível enviar o trabalho de impressão para uma mesa vazia" - -msgid "This printer does not support printing all plates" -msgstr "Esta impressora não suporta a impressão em todas as mesas" +"A impressora selecionada (%s) é incompatível com a configuração do arquivo " +"de impressão (%s). Ajuste a predefinição da impressora na página de " +"preparação ou escolha uma impressora compatível nesta página." msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7297,23 +8659,36 @@ msgstr "" "gerar vídeos timelapse." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse não é suportado porque a sequência de impressão está configurada " -"para \"Por objeto\"." +"A impressora atual não suporta timelapse no Modo Tradicional ao imprimir " +"Por Objeto." msgid "Errors" msgstr "Erros" -msgid "Please check the following:" -msgstr "Por favor, verifique o seguinte:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" +"Mais de um tipo de filamento foi mapeado para o mesmo carretel externo, o " +"que pode causar problemas de impressão. A impressora não irá pausar durante " +"a impressão." msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" +"A configuração do tipo de filamento do carretel externo é diferente da " +"configuração do filamento no arquivo de fatiamento." + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" -"O tipo de impressora selecionado ao gerar o G-Code não está consistente com " +"O tipo de impressora selecionado ao gerar o G-code não está consistente com " "a impressora atualmente selecionada. É recomendado que você use o mesmo tipo " "de impressora para fatiar." @@ -7326,30 +8701,8 @@ msgstr "" "se eles são os filamentos necessários. Se estiverem corretos, pressione " "\"Confirmar\" para iniciar a impressão." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "bico no perfil: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "bico memorizado: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Seu diâmetro de bico no arquivo fatiado não é consistente com o bico " -"memorizado. Se você mudou seu bico recentemente, vá para Dispositivo > " -"Partes da impressora para alterar as configurações." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Imprimir material de temperatura alta (material %s) com %s poderá causar " -"danos ao bico" +msgid "Please check the following:" +msgstr "Por favor, verifique o seguinte:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" @@ -7363,29 +8716,243 @@ msgstr "" "impressão." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Conectando à impressora. Não é possível cancelar durante o processo de " -"conexão." +"Isso verifica a planicidade da mesa aquecida. O nivelamento torna a altura " +"de extrusão uniforme." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Cuidado ao usar! A calibração de fluxo no PEI Texturizado pode falhar devido " -"à superfície irregular." +"Este processo determina os valores de fluxo dinâmico para melhorar a " +"qualidade geral de impressão." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Calibração automática de fluxo usando Micro Lidar" +msgid "Preparing print job" +msgstr "Preparando trabalho de impressão" -msgid "Modifying the device name" -msgstr "Modificando o nome do dispositivo" +msgid "The name length exceeds the limit." +msgstr "O comprimento do nome excede o limite." -msgid "Bind with Pin Code" -msgstr "Vincular com Código PIN" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" +"O custo de %dg de filamento e %d muda mais do que o agrupamento ideal." -msgid "Send to Printer SD card" -msgstr "Enviar para o cartão SD da impressora" +msgid "nozzle" +msgstr "bico" + +msgid "both extruders" +msgstr "ambas extrusoras" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" +"Dica: Se você trocou o bico da sua impressora recentemente, acesse " +"'Dispositivo -> Peças da impressora' para alterar as configurações do bico." + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" +"O diâmetro %s (%.1fmm) da impressora atual não corresponde ao arquivo de " +"fatiamento (%.1fmm). Certifique-se de que o bico instalado corresponde às " +"configurações da impressora, então defina a predefinição de impressora " +"correspondente ao fatiar." + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" +"O diâmetro do bico atual (%.1fmm) não corresponde ao arquivo de fatiamento " +"(%.1fmm). Certifique-se de que o bico instalado corresponde às configurações " +"da impressora, então defina a predefinição de impressora correspondente ao " +"fatiar." + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" +"A dureza do material atual (%s) excede a dureza de %s(%s). Verifique as " +"configurações do bico ou do material e tente novamente." + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "O filamento em %s pode amolecer. Por favor, retire-o." + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" +"O filamento em %s é desconhecido e pode amolecer. Por favor, defina o " +"filamento." + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" +"Não foi possível encontrar automaticamente um filamento adequado. Clique " +"para selecionar manualmente." + +msgid "Cool" +msgstr "Fria" + +msgid "Engineering" +msgstr "Engenharia" + +msgid "High Temp" +msgstr "Alta Temperatura" + +msgid "Cool(Supertack)" +msgstr "Fria(Supertack)" + +msgid "Click here if you can't connect to the printer" +msgstr "Clique aqui se não conseguir conectar-se à impressora" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Sem conta de login, apenas as impressoras em modo LAN são mostradas." + +msgid "Connecting to server..." +msgstr "Conectando ao servidor…" + +msgid "Synchronizing device information..." +msgstr "Sincronizando informações do dispositivo…" + +msgid "Synchronizing device information timed out." +msgstr "Expirado tempo limite de sincronização das informações do dispositivo." + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" +"Não é possível enviar um trabalho de impressão quando a impressora não está " +"em modo FDM." + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Não é possível enviar um trabalho de impressão quando a impressora está " +"atualizando o firmware." + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"A impressora está executando instruções. Por favor, reinicie a impressão " +"após ela terminar." + +msgid "AMS is setting up. Please try again later." +msgstr "O AMS está inicializando. Tente novamente mais tarde." + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" +"Informações do bico inválidas. Atualize a página ou defina as " +"informações do bico manualmente." + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "O armazenamento precisa estar inserido antes de imprimir via LAN." + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" +"O armazenamento está em um estado anormal ou em modo apenas de leitura." + +msgid "Storage needs to be inserted before printing." +msgstr "O armazenamento precisa estar inserido antes de imprimir." + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Não é possível enviar o trabalho de impressão para uma impressora cujo " +"firmware precisa ser atualizado." + +msgid "Cannot send a print job for an empty plate." +msgstr "Não é possível enviar um trabalho de impressão para uma placa vazia." + +msgid "Storage needs to be inserted to record timelapse." +msgstr "O armazenamento precisa estar inserido para gravar o timelapse." + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Esta impressora não suporta a imprimir todas as placas." + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "É necessária uma temperatura elevada na câmara. Feche a porta." + +msgid "Please refer to Wiki before use->" +msgstr "Consulte o Wiki antes de usar->" + +msgid "Send to Printer storage" +msgstr "Enviar para armazenamento da Impressora" + +msgid "Try to connect" +msgstr "Tentar conexão" + +msgid "click to retry" +msgstr "clique para tentar novamente" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "Limite de tempo de envio exedido, verifique se a versão do firmware " +"tem suporte." + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" +"Não foi possível obter armazenamento externo disponível. Confirme e tente " +"novamente." + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" +"Tempo limite de aquisição de capacidade de mídia excedido. Verifique se a " +"versão do firmware tem suporte." + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "Enviando…" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" +"O limite de tempo para o envio do arquivo foi excedido. Verifique se a " +"versão do firmware suporta esta operação ou verifique se a impressora está " +"funcionando corretamente." + +msgid "Sending failed, please try again!" +msgstr "Falha no envio, tente novamente!" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" @@ -7394,19 +8961,18 @@ msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" -"A impressora selecionada é incompatível com os perfis de impressora " -"escolhidos." +"A impressora selecionada é incompatível com as predefinições de impressora " +"escolhidas." -msgid "An SD card needs to be inserted before send to printer SD card." +msgid "Storage needs to be inserted before send to printer." msgstr "" -"Um cartão SD precisa ser inserido antes de enviar para o cartão SD da " -"impressora." +"O armazenamento precisa estar inserido antes de enviar para a impressora." msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "A impressora deve estar na mesma LAN do Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "A impressora não suporta enviar para o cartão SD da impressora." +msgid "The printer does not support sending to printer storage." +msgstr "A impressora não suporta envio para o armazenamento da impressora." msgid "Slice ok." msgstr "Fatiamento ok." @@ -7424,10 +8990,10 @@ msgid "Failed to publish login request" msgstr "Falha ao publicar a solicitação de login" msgid "Get ticket from device timeout" -msgstr "Tempo esgotado ao obter o ticket do dispositivo" +msgstr "Limite de tempo excedido ao obter o ticket do dispositivo" msgid "Get ticket from server timeout" -msgstr "Tempo esgotado ao obter o ticket do servidor" +msgstr "Limite de tempo excedido ao obter o ticket do servidor" msgid "Failed to post ticket to server" msgstr "Falha ao enviar o ticket para o servidor" @@ -7436,7 +9002,7 @@ msgid "Failed to parse login report reason" msgstr "Falha ao analisar o motivo do relatório de login" msgid "Receive login report timeout" -msgstr "Tempo esgotado ao receber o relatório de login" +msgstr "Limite de tempo excedido ao receber o relatório de login" msgid "Unknown Failure" msgstr "Falha desconhecida" @@ -7455,7 +9021,7 @@ msgid "Pin Code" msgstr "Código PIN" msgid "Binding..." -msgstr "Vinculando..." +msgstr "Vinculando…" msgid "Please confirm on the printer screen" msgstr "Confirme na tela da impressora" @@ -7466,7 +9032,7 @@ msgstr "Login falhou. Por favor, verifique o Código PIN." msgid "Log in printer" msgstr "Entrar na impressora" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Você gostaria de entrar nesta impressora com a conta atual?" msgid "Check the reason" @@ -7479,10 +9045,10 @@ msgid "Terms and Conditions" msgstr "Termos e Condições" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Obrigado por adquirir um dispositivo Bambu Lab. Antes de usar seu " @@ -7512,11 +9078,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "Na comunidade de Impressão 3D, aprendemos com os sucessos e falhas uns dos " "outros para ajustar nossos próprios parâmetros de fatiamento e " @@ -7560,70 +9126,97 @@ msgid "Save current %s" msgstr "Salvar %s atual" msgid "Delete this preset" -msgstr "Excluir este preset" +msgstr "Excluir esta predefinição" msgid "Search in preset" -msgstr "Pesquisar nos presets" +msgstr "Pesquisar nas predefinições" msgid "Click to reset all settings to the last saved preset." msgstr "" -"Clique para redefinir todas as configurações para o último preset salvo." +"Clique para redefinir todas as configurações para a última predefinição " +"salva." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"A Torre Prime é necessária para um timelapse suave. Pode haver falhas no " -"modelo sem a torre prime. Tem certeza de que deseja desativar a torre prime?" +"Uma torre de preparo é necessária para um timelapse suave. Pode haver falhas " +"no modelo sem a torre de preparo. Tem certeza de que deseja desativar a " +"torre de preparo?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Habilitar a altura Z precisa e a torre de preparo pode fazer com que o " +"tamanho da torre de preparo aumente. Deseja habilitar mesmo assim?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" +"É necessária uma torre de preparação para a detecção de aglomeração. Podem " +"ocorrer falhas no modelo sem a torre de preparação. Tem certeza de que " +"deseja desativar a torre de preparação?" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" +"A torre de preparação é necessária para a detecção de aglomeração. Podem " +"ocorrer falhas no modelo sem o Prime Tower. Tem certeza de que deseja " +"ativar a detecção de aglomeração?" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"A Torre Prime é necessária para um timelapse suave. Pode haver falhas no " -"modelo sem a torre prime. Deseja ativar a torre prime?" +"Uma torre de preparo é necessária para um timelapse suave. Pode haver falhas " +"no modelo sem a torre de preparo. Deseja ativar a torre de preparo?" msgid "Still print by object?" msgstr "Ainda imprimir por objeto?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Adicionamos um estilo experimental \"Tree Slim\" que apresenta um volume de " -"suporte menor, mas uma resistência mais fraca.\n" -"Recomendamos usar com: 0 camadas de interface, 0 distância superior, 2 " -"paredes." +"Materiais de suporte não-solúveis não são recomendados para base de " +"suporte.\n" +"Tem certeza de que deseja usá-los para base de suporte?\n" msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Ao usar material de suporte para a interface de suporte, recomendamos as " +"seguintes configurações:\n" +"0 distância Z superior, 0 espaçamento de interface, padrão retilíneo " +"entrelaçado e desabilitar altura da camada de suporte independente." + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Alterar essas configurações automaticamente? \n" +"Alterar essas configurações automaticamente?\n" "Sim - Alterar essas configurações automaticamente\n" "Não - Não alterar essas configurações para mim" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Para os estilos \"Tree Strong\" e \"Tree Hybrid\", recomendamos as seguintes " -"configurações: pelo menos 2 camadas de interface, pelo menos 0.1mm de " -"distância superior em z ou uso de materiais de suporte na interface." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Ao usar material de suporte para a interface de suporte, recomendamos as " +"Ao usar material solúvel para a interface de suporte, recomendamos as " "seguintes configurações:\n" -"distância z superior 0, espaçamento de interface 0, padrão concêntrico e " -"desabilitar altura de camada de suporte independente" +"0 distância Z superior , 0 espaçamento de interface, padrão retilíneo " +"entrelaçado, desabilitar altura da camada de suporte independente\n" +"e usar materiais solúveis para o suporte e base do suporte." msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7638,6 +9231,20 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Tem certeza de que deseja habilitar esta opção?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Padrões de preenchimento são projetados para lidar com a rotação " +"automaticamente para garantir a impressão adequada e atingir os efeitos " +"pretendidos (Ex. Giroide, Cúbico). Girar o padrão de preenchimento esparso " +"atual pode causar suporte insuficiente. Prossiga com cautela e verifique " +"cuidadosamente se há possíveis problemas de impressão. Tem certeza de que " +"deseja habilitar esta opção?" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7649,14 +9256,14 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "A altura da camada excede o limite em Configurações da Impressora -> " "Extrusora -> Limites de altura da camada, isso pode causar problemas de " "qualidade de impressão." -msgid "Adjust to the set range automatically? \n" -msgstr "Ajustar automaticamente à faixa definida? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Ajustar automaticamente à faixa definida?\n" msgid "Adjust" msgstr "Ajustar" @@ -7666,24 +9273,24 @@ msgstr "Ignorar" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" -"Recurso experimental: Retrair e cortar o filamento a uma distância maior " -"durante mudanças de filamento para minimizar a purga. Embora possa reduzir " -"notavelmente a purga, ele também pode elevar o risco de bolhas no bico ou " -"outras complicações de impressão." +"Funcionalidade experimental: Retrair e cortar o filamento a uma distância " +"maior durante mudanças de filamento para minimizar a purga. Embora possa " +"reduzir notavelmente a purga, ele também pode elevar o risco de bolhas no " +"bico ou outras complicações de impressão." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" -"Recurso experimental: Retrair e cortar o filamento a uma distância maior " -"durante as trocas de filamento para minimizar a purga. Embora isso possa " -"reduzir consideravelmente a purga, também pode aumentar o risco de " +"Funcionalidade experimental: Retrair e cortar o filamento a uma distância " +"maior durante as trocas de filamento para minimizar a purga. Embora isso " +"possa reduzir consideravelmente a purga, também pode aumentar o risco de " "obstruções no bico ou outras complicações de impressão. Por favor, use com o " "firmware mais recente da impressora." @@ -7694,9 +9301,86 @@ msgid "" "\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar um timelapse sem o hotend aparecer, é recomendável adicionar uma " -"\"Torre Prime para Timelapse\" \n" -"clique com o botão direito na posição vazia da mesa e escolha \"Adicionar " -"Primitivo\"->\"Torre Prime para Timelapse\"." +"\"Torre de Limpeza para Timelapse\" \n" +"clique com o botão direito na posição vazia da placa de impressão e escolha " +"\"Adicionar Primitivo\"->\"Torre de Limpeza para Timelapse\"." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Uma cópia da predefinição de sistema atual será criada, que será desanexada " +"da predefinição de sistema." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"A predefinição customizada atual será desanexada da predefinição de sistema " +"pai." + +msgid "Modifications to the current profile will be saved." +msgstr "Modificações ao perfil atual serão salvas." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Esta ação não é reversível.\n" +"Você quer prosseguir?" + +msgid "Detach preset" +msgstr "Desanexar predefinição" + +msgid "This is a default preset." +msgstr "Essa é uma predefinição padrão." + +msgid "This is a system preset." +msgstr "Essa é uma predefinição do sistema." + +msgid "Current preset is inherited from the default preset." +msgstr "A predefinição atual é herdada da predefinição padrão." + +msgid "Current preset is inherited from" +msgstr "A predefinição atual é herdada de" + +msgid "It can't be deleted or modified." +msgstr "Não pode ser excluído ou modificado." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Qualquer modificação deve ser salva como uma nova predefinição herdada deste." + +msgid "To do that please specify a new name for the preset." +msgstr "" +"Para fazer isso, por favor especifique um novo nome para a predefinição." + +msgid "Additional information:" +msgstr "Informação adicional:" + +msgid "vendor" +msgstr "fornecedor" + +msgid "printer model" +msgstr "modelo de impressora" + +msgid "default print profile" +msgstr "perfil de impressora padrão" + +msgid "default filament profile" +msgstr "perfil de filamento padrão" + +msgid "default SLA material profile" +msgstr "perfil de material SLA padrão" + +msgid "default SLA print profile" +msgstr "perfil de impressora SLA padrão" + +msgid "full profile name" +msgstr "nome completo do perfil" + +msgid "symbolic profile name" +msgstr "nome simbólico do perfil" msgid "Line width" msgstr "Largura da linha" @@ -7708,22 +9392,22 @@ msgid "Precision" msgstr "Precisão" msgid "Wall generator" -msgstr "Gerador de perímetros" +msgstr "Gerador de paredes" msgid "Walls and surfaces" -msgstr "Perímetros e superfícies" +msgstr "Paredes e superfícies" msgid "Bridging" msgstr "Ponte" msgid "Overhangs" -msgstr "Overhangs" +msgstr "Saliências" msgid "Walls" -msgstr "Perímetros" +msgstr "Paredes" msgid "Top/bottom shells" -msgstr "Camadas de topo/base" +msgstr "Cascas de topo/base" msgid "Initial layer speed" msgstr "Velocidade da primeira camada" @@ -7732,17 +9416,17 @@ msgid "Other layers speed" msgstr "Velocidade de outras camadas" msgid "Overhang speed" -msgstr "Velocidade em overhangs" +msgstr "Velocidade em saliências" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"Esta é a velocidade para vários graus de avanço. Os graus de avanço são " -"expressos como uma porcentagem da largura da linha. A velocidade 0 significa " -"que não há desaceleração para o intervalo de graus de avanço e a velocidade " -"do perímetro é usada" +"Esta é a velocidade para vários degraus de saliência. Os degraus de " +"saliência são expressos como uma porcentagem da largura da linha. A " +"velocidade 0 significa que não há desaceleração para o intervalo de degraus " +"de saliência e a velocidade de parede é usada" msgid "Bridge" msgstr "Ponte" @@ -7765,14 +9449,26 @@ msgstr "Jangada" msgid "Support filament" msgstr "Filamento de suporte" +msgid "Support ironing" +msgstr "Passar a ferro nos suportes" + msgid "Tree supports" msgstr "Suportes de árvore" -msgid "Skirt" -msgstr "Saia" +msgid "Multimaterial" +msgstr "Multimaterial" msgid "Prime tower" -msgstr "Torre Prime" +msgstr "Torre de preparo" + +msgid "Filament for Features" +msgstr "Filamento para Recursos" + +msgid "Ooze prevention" +msgstr "Prevenção de vazamento" + +msgid "Skirt" +msgstr "Saia" msgid "Special mode" msgstr "Modo especial" @@ -7800,12 +9496,12 @@ msgid_plural "" "estimation." msgstr[0] "" "A linha %s seguinte contém palavras-chave reservadas.\n" -"Por favor, remova-a, ou afetará a visualização do código G e a estimativa de " +"Por favor, remova-a, ou afetará a visualização do G-code e a estimativa de " "tempo de impressão." msgstr[1] "" "As linhas %s seguintes contêm palavras-chave reservadas.\n" -"Por favor, remova-as, ou afetará a visualização do código G e a estimativa " -"de tempo de impressão." +"Por favor, remova-as, ou afetará a visualização do G-code e a estimativa de " +"tempo de impressão." msgid "Reserved keywords found" msgstr "Palavras-chave reservadas encontradas" @@ -7824,7 +9520,11 @@ msgstr "Temperatura recomendada do bico" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" -"Faixa de temperatura recomendada para esta boquilha. 0 significa não definido" +"Faixa de temperatura do bico recomendada para este filamento. 0 significa " +"não definido" + +msgid "Flow ratio and Pressure Advance" +msgstr "Taxa de fluxo e Avanço de Pressão" msgid "Print chamber temperature" msgstr "Temperatura da câmara de impressão" @@ -7832,73 +9532,79 @@ msgstr "Temperatura da câmara de impressão" msgid "Print temperature" msgstr "Temperatura de impressão" -msgid "Nozzle" -msgstr "Bico" - msgid "Nozzle temperature when printing" msgstr "Temperatura do bico ao imprimir" -msgid "Cool plate" -msgstr "Mesa fria" +msgid "Cool Plate (SuperTack)" +msgstr "Placa Fria (SuperTack)" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Temperatura da mesa quando a cool plate (mesa fria) está instalada. Valor 0 " -"significa que o filamento não suporta impressão na cool plate" +"Temperatura da mesa quando a Placa Fria SuperTack está instalada. O valor 0 " +"significa que o filamento não suporta impressão na Placa Fria SuperTack." -msgid "Textured Cool plate" -msgstr "" +msgid "Cool Plate" +msgstr "Placa Fria" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" +"Temperatura da mesa quando a Placa Fria está instalada. O valor 0 significa " +"que o filamento não suporta impressão na Placa Fria." -msgid "Engineering plate" -msgstr "Mesa de engenharia" +msgid "Textured Cool Plate" +msgstr "Placa Fria Texturizada" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"Temperatura da mesa quando a mesa de engenharia está instalada. Valor 0 " -"significa que o filamento não suporta impressão na Mesa de Engenharia" +"Temperatura da mesa quando a Placa Fria Texturizada está instalada. O valor " +"0 significa que o filamento não suporta impressão na Placa Fria Texturizada." + +msgid "Engineering Plate" +msgstr "Placa de Engenharia" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "" +"Temperatura da mesa quando a Placa de Engenharia está instalada. O valor 0 " +"significa que o filamento não suporta impressão na Placa de Engenharia." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Mesa PEI lisa / Mesa de alta temperatura" +msgstr "Placa PEI Lisa / Placa de Alta Temperatura" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Temperatura da mesa quando a mesa PEI lisa/ de alta temperatura está " -"instalada. O valor 0 significa que o filamento não suporta a impressão na " -"Mesa PEI lisa/Mesa de Alta Temperatura" +"Temperatura da mesa quando a Placa PEI Lisa/Placa de Alta Temperatura está " +"instalado. O valor 0 significa que o filamento não suporta a impressão no " +"Placa PEI Lisa/Placa de Alta Temperatura." msgid "Textured PEI Plate" -msgstr "Mesa PEI Texturizada" +msgstr "Placa PEI Texturizada" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Temperatura da mesa quando a mesa PEI texturizada está instalada. O valor 0 " -"significa que o filamento não suporta impressão na mesa PEI texturizada" +"Temperatura da mesa quando a Placa PEI Texturizada está instalado. O valor 0 " +"significa que o filamento não suporta impressão na Placa PEI Texturizada." msgid "Volumetric speed limitation" msgstr "Limitação de fluxo volumétrico" -msgid "Cooling" -msgstr "Resfriamento" - msgid "Cooling for specific layer" msgstr "Resfriamento para camada específica" msgid "Part cooling fan" -msgstr "Ventilador de resfriamento da peça" +msgstr "Ventilador de resfriamento de peças" msgid "Min fan speed threshold" msgstr "Limiar de velocidade mínima do ventilador" @@ -7909,10 +9615,10 @@ msgid "" "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"A velocidade do ventilador de resfriamento da peça começará a funcionar na " +"A velocidade do ventilador de resfriamento de peças começará a funcionar na " "velocidade mínima quando o tempo estimado da camada não for mais longo do " "que o tempo da camada ajustado. Quando o tempo da camada for menor que o " -"limite, a velocidade do ventilador é interpolada entre a velocidade mínima e " +"limiar, a velocidade do ventilador é interpolada entre a velocidade mínima e " "máxima de acordo com o tempo de impressão da camada" msgid "Max fan speed threshold" @@ -7922,11 +9628,11 @@ msgid "" "Part cooling fan speed will be max when the estimated layer time is shorter " "than the setting value" msgstr "" -"A velocidade do ventilador de resfriamento da peça será máxima quando o " +"A velocidade do ventilador de resfriamento de peças será máxima quando o " "tempo estimado da camada for menor que o valor ajustado" msgid "Auxiliary part cooling fan" -msgstr "Ventilador auxiliar de resfriamento da peça" +msgstr "Ventilador auxiliar de resfriamento de peças" msgid "Exhaust fan" msgstr "Ventilador de exaustão" @@ -7941,35 +9647,44 @@ msgid "Filament start G-code" msgstr "G-code de início do filamento" msgid "Filament end G-code" -msgstr "G-code final do filamento" - -msgid "Multimaterial" -msgstr "Multimaterial" +msgstr "G-code de final do filamento" msgid "Wipe tower parameters" -msgstr "Parâmetros da Torre Prime" +msgstr "Parâmetros da torre de limpeza" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "" "Parâmetros de troca de ferramentas com impressoras MM de extrusora única" -msgid "Ramming settings" -msgstr "Configurações de moldeamento" +msgid "Set" +msgstr "Definir" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "" -"Parâmetros de troca de ferramentas com impressoras MM de múltiplas extrusoras" +"Parâmetros de troca de ferramentas com impressoras MM de extrusoras múltiplas" + +msgid "Dependencies" +msgstr "Dependências" + +msgid "Compatible printers" +msgstr "Impressoras compatíveis" + +msgid "Compatible process profiles" +msgstr "Perfis de processo compatíveis" msgid "Printable space" msgstr "Espaço de impressão" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" -msgstr "" +msgstr "Valor inválido fornecido para o parâmetro %1%: %2%" msgid "G-code flavor is switched" -msgstr "" +msgstr "Tipo de G-code está trocado" msgid "Cooling Fan" msgstr "Ventilador de resfriamento" @@ -7978,52 +9693,61 @@ msgid "Fan speed-up time" msgstr "Tempo de aceleração do ventilador" msgid "Extruder Clearance" -msgstr "Margem da extrusora" +msgstr "Folga da extrusora" msgid "Adaptive bed mesh" -msgstr "Bed Mesh adaptativo" +msgstr "Malha da mesa adaptativa" msgid "Accessory" msgstr "Acessório" -msgid "Machine gcode" -msgstr "G-Code da máquina" +msgid "Machine G-code" +msgstr "G-code da máquina" msgid "Machine start G-code" -msgstr "G-Code de início da máquina" +msgstr "G-code de início da máquina" msgid "Machine end G-code" -msgstr "G-Code final da máquina" +msgstr "G-code final da máquina" msgid "Printing by object G-code" -msgstr "G-Code de impressão por objeto" +msgstr "G-code de impressão por objeto" msgid "Before layer change G-code" -msgstr "G-Code antes da mudança de camada" +msgstr "G-code antes da mudança de camada" msgid "Layer change G-code" -msgstr "G-Code de mudança de camada" +msgstr "G-code de mudança de camada" -msgid "Time lapse G-code" -msgstr "G-Code de timelapse" +msgid "Timelapse G-code" +msgstr "G-code de timelapse" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" -msgstr "G-Code de mudança de filamento" +msgstr "G-code de mudança de filamento" msgid "Change extrusion role G-code" -msgstr "G-Code de mudança de tipo de extrusão" +msgstr "G-code de mudança de tipo de extrusão" msgid "Pause G-code" -msgstr "G-Code de pausa" +msgstr "G-code de pausa" msgid "Template Custom G-code" -msgstr "G-Code personalizado do modelo" +msgstr "G-code personalizado do gabarito" msgid "Motion ability" msgstr "Movimento" msgid "Normal" -msgstr "normal" +msgstr "Normal" + +msgid "Resonance Avoidance" +msgstr "Prevenção de Ressonância" + +msgid "Resonance Avoidance Speed" +msgstr "Velocidade de Prevenção de Ressonância" msgid "Speed limitation" msgstr "Limitação de velocidade" @@ -8034,20 +9758,45 @@ msgstr "Limitação de aceleração" msgid "Jerk limitation" msgstr "Limitação de Jerk" -msgid "Single extruder multimaterial setup" -msgstr "Configuração de múltiplos materiais com um único extrusor" +msgid "Single extruder multi-material setup" +msgstr "Configuração multimaterial de extrusora única" + +msgid "Number of extruders of the printer." +msgstr "Número de extrusoras da impressora." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"A extrusora única multimaterial está selecionada, \n" +"e todas as extrusoras devem ter o mesmo diâmetro.\n" +"Você quer mudar o diâmetro para todas as extrusoras ao primeiro valor do " +"diâmetro da ponteira da extrusora?" + +msgid "Nozzle diameter" +msgstr "Diâmetro do bico" msgid "Wipe tower" -msgstr "Torre Prime" +msgstr "Torre de limpeza" -msgid "Single extruder multimaterial parameters" -msgstr "Parâmetros de múltiplos materiais com um único extrusor" +msgid "Single extruder multi-material parameters" +msgstr "Parâmetros multimateriais de extrusora única" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Esta é uma impressora multimaterial de extrusora única, os diâmetros de " +"todas as extrusoras serão definidos para o novo valor. Você deseja " +"prosseguir?" msgid "Layer height limits" msgstr "Limites de altura da camada" -msgid "Lift Z Enforcement" -msgstr "Aplicação do Z hop" +msgid "Z-Hop" +msgstr "Z-Hop" msgid "Retraction when switching material" msgstr "Retração ao trocar material" @@ -8065,6 +9814,17 @@ msgstr "" msgid "Firmware Retraction" msgstr "Retração de Firmware" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" +"Alternar para uma impressora com tipos ou números de extrusoras diferentes " +"descartará ou redefinirá as alterações nos parâmetros relacionados à " +"extrusora ou a múltiplos bicos." + +msgid "Use Modified Value" +msgstr "Usar Valor Modificado" + msgid "Detached" msgstr "Desanexado" @@ -8073,45 +9833,40 @@ msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Preset de Filamento e %d Preset de Processo estão vinculados a esta " -"impressora. Esses presets serão excluídos se a impressora for deletada." +"%d Predefinição de Filamento e %d Predefinição de Processo estão vinculados " +"a esta impressora. Essas predefinições serão excluídos se a impressora for " +"deletada." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "Os perfis herdados por outros perfis não podem ser excluídos!" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "" +"As predefinições herdados por outras predefinições não podem ser excluídas!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "Os seguintes perfis herdam este perfil." -msgstr[1] "O seguinte perfil herda este perfil." +msgstr[0] "As seguintes predefinições herdam esta predefinição." +msgstr[1] "A seguinte predefinição herda esta predefinição." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" -msgstr "%1% Perfil" +msgstr "%1% Predefinição" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." -msgstr[0] "O seguinte perfil também será excluído." -msgstr[1] "Os seguintes perfis também serão excluídos." - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Tem certeza de que deseja excluir o perfil selecionado? \n" -"Se o perfil corresponde a um filamento atualmente em uso em sua impressora, " -"redefina as informações do filamento para esse slot." +msgstr[0] "A seguinte predefinição também será excluída." +msgstr[1] "As seguintes predefinições também serão excluídas." #, boost-format msgid "Are you sure to %1% the selected preset?" -msgstr "Tem certeza de %1% o perfil selecionado?" +msgstr "Tem certeza de %1% a predefinição selecionada?" -msgid "All" -msgstr "Todos" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Definir" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "Clique para redefinir o valor atual e anexá-lo ao valor global." @@ -8163,14 +9918,15 @@ msgid "Keep the selected options." msgstr "Manter as opções selecionadas." msgid "Transfer the selected options to the newly selected preset." -msgstr "Transferir as opções selecionadas para o perfil recém-selecionado." +msgstr "" +"Transferir as opções selecionadas para a predefinição recém-selecionada." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" -"Salvar as opções selecionadas para o perfil \n" +"Salvar as opções selecionadas para a predefinição \n" "\"%1%\"." #, boost-format @@ -8178,39 +9934,39 @@ msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"Transferir as opções selecionadas para o perfil recém-selecionado \n" +"Transferir as opções selecionadas para a predefinição recém-selecionada \n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "O perfil \"%1%\" contém as seguintes alterações não salvas:" +msgstr "A predefinição \"%1%\" contém as seguintes alterações não salvas:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" msgstr "" -"O perfil \"%1%\" não é compatível com o novo perfil da impressora e contém " -"as seguintes alterações não salvas:" +"A predefinição \"%1%\" não é compatível com o novo perfil de impressora e " +"contém as seguintes alterações não salvas:" #, boost-format msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" msgstr "" -"O perfil \"%1%\" não é compatível com o novo perfil de processo e contém as " -"seguintes alterações não salvas:" +"A predefinição \"%1%\" não é compatível com o novo perfil de processo e " +"contém as seguintes alterações não salvas:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "Você alterou algumas configurações do preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Você alterou algumas configurações da predefinição \"%1%\"." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" -"Você pode salvar ou descartar os valores predefinidos que você modificou." +"Você pode salvar ou descartar os valores de predefinição que você modificou." msgid "" "\n" @@ -8218,8 +9974,8 @@ msgid "" "transfer the values you have modified to the new preset." msgstr "" "\n" -"Você pode salvar ou descartar os valores predefinidos que você modificou, ou " -"escolher transferir os valores modificados para o novo preset." +"Você pode salvar ou descartar os valores de predefinição que você modificou, " +"ou escolher transferir os valores modificados para a nova predefinição." msgid "You have previously modified your settings." msgstr "Você modificou suas configurações anteriormente." @@ -8230,23 +9986,20 @@ msgid "" "the modified values to the new project" msgstr "" "\n" -"Você pode descartar os valores predefinidos que você modificou, ou escolher " -"transferir os valores modificados para o novo projeto." +"Você pode descartar os valores de predefinição que você modificou, ou " +"escolher transferir os valores modificados para o novo projeto" msgid "Extruders count" msgstr "Número de extrusoras" -msgid "General" -msgstr "Geral" - msgid "Capabilities" msgstr "Capacidades" msgid "Show all presets (including incompatible)" -msgstr "Mostrar todos os perfis (incluindo os incompatíveis)" +msgstr "Mostrar todas as predefinições (incluindo as incompatíveis)" msgid "Select presets to compare" -msgstr "Selecione os perfis para comparar" +msgstr "Selecione as predefinições para comparar" msgid "" "You can only transfer to current active profile because it has been modified." @@ -8258,9 +10011,10 @@ msgid "" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" -"Transfira as opções selecionadas do perfil à esquerda para o da direita.\n" -"Nota: Novos perfis modificados serão selecionados nas guias de configurações " -"após fechar este diálogo." +"Transfira as opções selecionadas da predefinição da esquerda para o da " +"direita.\n" +"Nota: Novas predefinições modificados serão selecionados nas guias de " +"configurações após fechar este diálogo." msgid "Transfer values from left to right" msgstr "Transferir valores da esquerda para a direita" @@ -8270,7 +10024,7 @@ msgid "" "to right preset." msgstr "" "Se ativo, este diálogo pode ser usado para transferir valores selecionados " -"do perfil à esquerda para o da direita." +"da predefinição da esquerda para a da direita." msgid "Add File" msgstr "Adicionar arquivo" @@ -8303,6 +10057,9 @@ msgstr "Autor" msgid "Model Name" msgstr "Nome do Modelo" +msgid "Description:" +msgstr "Descrição:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Atualizar" @@ -8313,34 +10070,28 @@ msgstr "Uma nova versão está disponível" msgid "Configuration update" msgstr "Atualização de configuração" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Um novo pacote de configuração está disponível, Deseja instalá-lo?" -msgid "Description:" -msgstr "Descrição:" - msgid "Configuration incompatible" msgstr "Configuração incompatível" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "o pacote de configuração é incompatível com a aplicação atual." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "O pacote de configuração é incompatível com a aplicação atual.\n" "%s atualizará o pacote de configuração, caso contrário, não será possível " -"iniciar" +"iniciar." #, c-format, boost-format msgid "Exit %s" msgstr "Sair %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "o pacote de configuração é incompatível com o APP atual." - msgid "Configuration updates" msgstr "Atualizações de configuração" @@ -8350,55 +10101,249 @@ msgstr "Nenhuma atualização disponível." msgid "The configuration is up to date." msgstr "A configuração está atualizada." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Importar cor de arquivo Obj" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." msgstr "" msgid "Specify number of colors:" -msgstr "" +msgstr "Especifique a quantidade de cores:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" msgstr "" msgid "Recommended " +msgstr "Recomendado " + +msgid "view" msgstr "" -msgid "Current filament colors:" +msgid "Current filament colors" msgstr "" -msgid "Quick set:" +msgid "Matching" +msgstr "" + +msgid "Quick set" msgstr "" msgid "Color match" -msgstr "" +msgstr "Correspondência de cor" msgid "Approximate color matching." -msgstr "" +msgstr "Correspondência de cor aproximada." msgid "Append" -msgstr "" +msgstr "Adicionar" -msgid "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" msgstr "" msgid "Reset mapped extruders." -msgstr "" +msgstr "Redefinir extrusoras mapeadas." -msgid "Cluster colors" -msgstr "" - -msgid "Map Filament" -msgstr "" +msgid "Note" +msgstr "Nota" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" +"A cor foi selecionada, você pode escolher em OK\n" +"para continuar ou ajustá-la manualmente." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" msgstr "" +"A sincronização de filamentos AMS descartará suas predefinições de filamento " +"modificadas mas não salvas.\n" +"Tem certeza de que deseja continuar?" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "Original" + +msgid "After mapping" +msgstr "Depois de mapear" + +msgid "After overwriting" +msgstr "Depois de sobrescrever" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "Placa" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" +"A impressora conectada não corresponde à impressora selecionada no momento. " +"Mude a impressora selecionada." + +msgid "Mapping" +msgstr "Mapeando" + +msgid "Overwriting" +msgstr "Sobrescrevendo" + +msgid "Reset all filament mapping" +msgstr "Redefinir todo mapeamento de filamento" + +msgid "Left Extruder" +msgstr "Extrusora Esquerda" + +msgid "(Recommended filament)" +msgstr "(Filamento recomendado)" + +msgid "Right Extruder" +msgstr "Extrusora Direita" + +msgid "Advanced Options" +msgstr "Opções Avançadas" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" +"Verifique a planicidade da mesa aquecida. O nivelamento uniformiza a " +"altura de extrusão.\n" +"*Modo automático: Nivele primeiro (cerca de 10 segundos). Ignore se a " +"superfície estiver plana." + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" +"Calibre os offsets dos bicos para melhorar a qualidade de impressão.\n" +"*Modo automático: Verifique a calibração antes de imprimir; ignore se for " +"desnecessário." + +msgid "Use AMS" +msgstr "Usar AMS" + +msgid "Tip" +msgstr "Dica" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" +"Sincronizar apenas o tipo e a cor do filamento, sem incluir informações do " +"espaço AMS." + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" +"Substitua a lista de filamentos do projeto sequencialmente com base nos " +"filamentos da impressora. Os filamentos de impressora não utilizados serão " +"adicionados automaticamente ao final da lista." + +msgid "Advanced settings" +msgstr "Definições avançadas" + +msgid "Add unused AMS filaments to filaments list." +msgstr "Adicionar filamentos AMS não utilizados à lista de filamentos." + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "Mesclar automaticamente as mesmas cores no modelo após o mapeamento." + +msgid "After being synced, this action cannot be undone." +msgstr "Após ser sincronizada, esta ação não poderá ser desfeita." + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" +"Após a sincronização, as predefinições e cores de filamento do projeto " +"serão substituídas pelos tipos e cores de filamento mapeados. Esta ação " +"não pode ser desfeita." + +msgid "Are you sure to synchronize the filaments?" +msgstr "Tem certeza de sincronizar os filamentos?" + +msgid "Synchronize now" +msgstr "Sincronizar agora" + +msgid "Synchronize Filament Information" +msgstr "Sincronizar Informações de Filamento" + +msgid "Add unused filaments to filaments list." +msgstr "Adicionar filamentos não utilizados à lista de filamentos." + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" +"Sincroniza apenas o tipo e a cor do filamento, não incluindo informações " +"do espaço." + +msgid "Ext spool" +msgstr "Carretel externo" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" +"Verifique se o tipo de bico do dispositivo é o mesmo que o tipo de bico " +"predefinido." + +msgid "Storage is not available or is in read-only mode." +msgstr "" +"O armazenamento não está disponível ou está em modo somente leitura." + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"A impressora selecionada (%s) é incompatível com o perfil de impressora " +"escolhido no fatiador (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse não é suportado porque a sequência de impressão está configurada " +"para \"Por objeto\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" +"Você selecionou filamento externo e filamento AMS ao mesmo tempo em uma " +"extrusora; será necessário trocar o filamento externo manualmente." + +msgid "Successfully synchronized nozzle information." +msgstr "Informações do bico sincronizadas com sucesso." + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "Informações do bico e do número de AMS sincronizadas com sucesso." + +msgid "Continue to sync filaments" +msgstr "Continue a sincronizar os filamentos" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "Cancelar" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "Cor e tipo de filamento da impressora sincronizados com sucesso." + +msgctxt "FinishSyncAms" +msgid "OK" +msgstr "OK" msgid "Ramming customization" msgstr "Customização de moldeamento" @@ -8415,7 +10360,7 @@ msgid "" "jams, extruder wheel grinding into filament etc." msgstr "" "O moldeamento denota a extrusão rápida logo antes de uma troca de " -"ferramentas em uma impressora MM de extrusão única. Seu propósito é dar " +"ferramentas em uma impressora MM de extrusora única. Seu propósito é dar " "forma adequadamente à ponta do filamento descarregado para que não impeça a " "inserção do novo filamento e possa ser reinserido posteriormente. Essa fase " "é importante e diferentes materiais podem exigir velocidades de extrusão " @@ -8423,40 +10368,27 @@ msgstr "" "durante o moldeamento são ajustáveis.\n" "\n" "Esta é uma configuração de nível especialista, ajustes incorretos " -"provavelmente resultarão em travamentos, moagem da roda de extrusão no " -"filamento, etc." +"provavelmente resultarão em travamentos, moagem de filamento na roda da " +"extrusora, etc." -msgid "Total ramming time" -msgstr "Tempo total de moldeamento" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Para uma taxa de fluxo constante, segure %1% enquanto arrasta." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "Moldeamento total" -msgid "Total rammed volume" -msgstr "Volume total de moldeamento de extremidade" +msgid "Volume" +msgstr "Volume" -msgid "Ramming line width" -msgstr "Largura da linha de moldeamento" - -msgid "Ramming line spacing" -msgstr "Espaçamento da linha de moldeamento" - -msgid "Auto-Calc" -msgstr "Auto-Calc" - -msgid "Re-calculate" -msgstr "Recalcular" - -msgid "Flushing volumes for filament change" -msgstr "Volumes de purga para troca de filamento" +msgid "Ramming line" +msgstr "Linha de moldeamento" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"O Orca recalculará seus volumes de purga toda vez que a cor dos filamentos " -"for alterada. Você pode desativar o cálculo automático em Snapmaker Orca > " -"Preferências" msgid "Flushing volume (mm³) for each filament pair." msgstr "Volume de purga (mm³) para cada par de filamentos." @@ -8469,49 +10401,60 @@ msgstr "Sugestão: Volume de Purga no intervalo [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "O multiplicador deve estar no intervalo [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Recalcular" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Multiplicador" -msgid "unloaded" -msgstr "descarregado" +msgid "Flushing volumes for filament change" +msgstr "Volumes de purga para troca de filamento" -msgid "loaded" -msgstr "carregado" - -msgid "Filament #" -msgstr "Filamento #" - -msgid "From" -msgstr "De" - -msgid "To" -msgstr "Para" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"O Windows Media Player é necessário para esta tarefa! Você quer habilitar o " +"'Windows Media Player' para seu sistema operacional?" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" msgstr "" +"BambuSource não foi registrado corretamente para reprodução de mídia! " +"Pressione Sim para registrá-lo novamente. Você será promovido duas vezes" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" +"Componente BambuSource ausente registrado para reprodução de mídia! " +"Reinstale o Bambu Studio ou procure ajuda pós-venda." msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" +"Usando um BambuSource de uma instalação diferente, a reprodução de vídeo " +"pode não funcionar corretamente! Pressione Sim para consertar." msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"Seu sistema não possui codecs H.264 para o GStreamer, que são necessários " +"para reproduzir vídeos. (Tente instalar os pacotes gstreamer1.0-plugins-bad " +"ou gstreamer1.0-libav e depois reinicie o Snapmaker Orca?)" msgid "Bambu Network plug-in not detected." msgstr "Plug-in de Rede Bambu não detectado." @@ -8537,12 +10480,6 @@ msgstr "Lista de objetos" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importar dados de geometria de arquivos STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Colar da área de transferência" @@ -8558,69 +10495,42 @@ msgstr "Mostrar lista de atalhos de teclado" msgid "Global shortcuts" msgstr "Atalhos globais" -msgid "Rotate View" -msgstr "Rotacionar visualização" - msgid "Pan View" -msgstr "Movimentar visualização" +msgstr "Movimentar vista" -msgid "Mouse wheel" -msgstr "Roda do mouse" +msgid "Rotate View" +msgstr "Rotacionar vista" msgid "Zoom View" -msgstr "Aproximar visualização" - -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" +msgstr "Aproximar vista" msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Orienta automaticamente os objetos selecionados ou todos os objetos. Se " "houver objetos selecionados, ele apenas orientará os selecionados. Caso " -"contrário, orientará todos os objetos no disco atual." +"contrário, ele orientará todos os objetos do projeto atual." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Orienta automaticamente todos os objetos na placa atual." msgid "Collapse/Expand the sidebar" msgstr "Recolher/Expandir a barra lateral" -msgid "⌘+Any arrow" -msgstr "⌘+Qualquer seta" +msgid "Any arrow" +msgstr "Qualquer seta" msgid "Movement in camera space" msgstr "Movimento no espaço da câmera" -msgid "⌥+Left mouse button" -msgstr "Botão esquerdo do mouse ⌥+" - msgid "Select a part" msgstr "Selecionar uma peça" -msgid "⌘+Left mouse button" -msgstr "Botão esquerdo do mouse ⌘+" - msgid "Select multiple objects" msgstr "Selecionar vários objetos" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Qualquer seta" - -msgid "Alt+Left mouse button" -msgstr "Botão esquerdo do mouse Alt+" - -msgid "Ctrl+Left mouse button" -msgstr "Botão esquerdo do mouse Ctrl+" - -msgid "Shift+Left mouse button" -msgstr "Botão esquerdo do mouse Shift+" - msgid "Select objects by rectangle" msgstr "Selecionar objetos por retângulo" @@ -8648,9 +10558,6 @@ msgstr "Seta para direita" msgid "Move selection 10 mm in positive X direction" msgstr "Mover seleção 10 mm na direção X positiva" -msgid "Shift+Any arrow" -msgstr "Shift+Qualquer seta" - msgid "Movement step set to 1 mm" msgstr "Passo de movimento configurado para 1 mm" @@ -8658,19 +10565,19 @@ msgid "keyboard 1-9: set filament for object/part" msgstr "teclado 1-9: ajustar filamento para objeto/peça" msgid "Camera view - Default" -msgstr "Visualização da câmera - Padrão" +msgstr "Vista da câmera - Padrão" msgid "Camera view - Top" -msgstr "Visualização da câmera - Superior" +msgstr "Vista da câmera - Superior" msgid "Camera view - Bottom" -msgstr "Visualização da câmera - Inferior" +msgstr "Vista da câmera - Inferior" msgid "Camera view - Front" -msgstr "Visualização da câmera - Frontal" +msgstr "Vista da câmera - Frontal" msgid "Camera view - Behind" -msgstr "Visualização da câmera - Posterior" +msgstr "Vista da câmera - Posterior" msgid "Camera Angle - Left side" msgstr "Ângulo da câmera - Lado esquerdo" @@ -8682,37 +10589,52 @@ msgid "Select all objects" msgstr "Selecionar todos os objetos" msgid "Gizmo move" -msgstr "Mover gizmo" - -msgid "Gizmo scale" -msgstr "Escala do gizmo" +msgstr "Gizmo mover" msgid "Gizmo rotate" -msgstr "Rotacionar gizmo" +msgstr "Gizmo rotacionar" + +msgid "Gizmo scale" +msgstr "Gizmo escala" + +msgid "Gizmo place face on bed" +msgstr "Gizmo posicionar face na mesa" msgid "Gizmo cut" -msgstr "Cortar gizmo" +msgstr "Gizmo cortar" -msgid "Gizmo Place face on bed" -msgstr "Posicionar face do gizmo na mesa" +msgid "Gizmo mesh boolean" +msgstr "Gizmo malha booleana" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM pintura em textura difusa" msgid "Gizmo SLA support points" -msgstr "Pontos de suporte SLA do gizmo" +msgstr "Gizmo de pontos de suporte SLA" msgid "Gizmo FDM paint-on seam" -msgstr "Costura de pintura FDM do gizmo" +msgstr "Gizmo de costura de pintura FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Texturizar / gravar texto no gizmo" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo Texturizar/gravar texto" + +msgid "Gizmo measure" +msgstr "Gizmo medir" + +msgid "Gizmo assemble" +msgstr "Gizmo montar" + +msgid "Gizmo brim ears" +msgstr "Gizmo orelhas da borda" msgid "Zoom in" -msgstr "Dar zoom" +msgstr "Aproximar zoom" msgid "Zoom out" -msgstr "Dar zoom" +msgstr "Afastar zoom" msgid "Switch between Prepare/Preview" -msgstr "Alternar entre Preparar/Visualizar" +msgstr "Alternar entre Preparar/Pré-visualizar" msgid "Plater" msgstr "Mesa" @@ -8720,32 +10642,20 @@ msgstr "Mesa" msgid "Move: press to snap by 1mm" msgstr "Mover: pressione para ajustar em 1mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Roda do mouse" - msgid "Support/Color Painting: adjust pen radius" msgstr "Suporte/Pintura em cores: ajustar o raio da caneta" -msgid "⌥+Mouse wheel" -msgstr "⌥+Roda do mouse" - msgid "Support/Color Painting: adjust section position" msgstr "Suporte/Pintura em cores: ajustar a posição da seção" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Roda do mouse" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Roda do mouse" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Definir o número da extrusora para os objetos e peças" -msgid "Delete objects, parts, modifiers " -msgstr "Excluir objetos, peças, modificadores " +msgid "Delete objects, parts, modifiers" +msgstr "Excluir objetos, peças, modificadores" msgid "Select the object/part and press space to change the name" msgstr "Selecione o objeto/peça e pressione espaço para mudar o nome" @@ -8774,15 +10684,12 @@ msgstr "Controle deslizante horizontal - Mover o polegar ativo para a direita" msgid "On/Off one layer mode of the vertical slider" msgstr "Ativar/Desativar modo de uma camada do controle deslizante vertical" -msgid "On/Off g-code window" -msgstr "Ativar/Desativar janela de G-Code" +msgid "On/Off G-code window" +msgstr "Ativar/Desativar janela de G-code" msgid "Move slider 5x faster" msgstr "Mover o controle deslizante 5 vezes mais rápido" -msgid "Shift+Mouse wheel" -msgstr "Shift+Roda do mouse" - msgid "Horizontal slider - Move to start position" msgstr "Barra deslizante horizontal — Mover para a posição inicial" @@ -8793,7 +10700,7 @@ msgid "Release Note" msgstr "Nota de lançamento" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "informações de atualização da versão %s:" msgid "Network plug-in update" @@ -8806,8 +10713,8 @@ msgstr "" "iniciado novamente." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "Um novo plug-in de rede (%s) está disponível. Deseja instalá-lo?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Um novo plug-in de rede (%s) está disponível, deseja instalá-lo?" msgid "New version of Snapmaker Orca" msgstr "Nova versão do Snapmaker Orca" @@ -8815,118 +10722,128 @@ msgstr "Nova versão do Snapmaker Orca" msgid "Skip this Version" msgstr "Pular esta versão" -msgid "Done" -msgstr "Concluído" - -msgid "resume" -msgstr "retomar" - -msgid "Resume Printing" -msgstr "Retomar impressão" - -msgid "Resume Printing(defects acceptable)" -msgstr "Retomar Impressão (defeitos aceitáveis)" - -msgid "Resume Printing(problem solved)" -msgstr "Retomar Impressão (problema resolvido)" - -msgid "Stop Printing" -msgstr "Parar impressão" - -msgid "Check Assistant" -msgstr "Checar Assistente" - -msgid "Filament Extruded, Continue" -msgstr "Filamento Extrudado, Continuar" - -msgid "Not Extruded Yet, Retry" -msgstr "Não Extrudado, Tente Novamente" - -msgid "Finished, Continue" -msgstr "Concluído, Continuar" - -msgid "Load Filament" -msgstr "Carregar Filamento" - -msgid "Filament Loaded, Resume" -msgstr "Filamento Carregado, Retomar" - -msgid "View Liveview" -msgstr "Exibir vista ao vivo" - msgid "Confirm and Update Nozzle" msgstr "Confirmar e Atualizar Bico" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Falha na conexão LAN (enviando arquivo de impressão)" +msgid "Connect the printer using IP and access code" +msgstr "Conecte a impressora usando IP e código de acesso" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Passo 1, por favor, confirme se o Snapmaker Orca e sua impressora estão na " -"mesma LAN." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Passo 2, se o IP e o Código de Acesso abaixo forem diferentes dos valores " -"reais na sua impressora, corrija-os." msgid "IP" -msgstr "PI" +msgstr "IP" msgid "Access Code" msgstr "Código de Acesso" +msgid "Printer model" +msgstr "Modelo de impressora" + +msgid "Printer name" +msgstr "Nome da impressora" + msgid "Where to find your printer's IP and Access Code?" msgstr "Onde encontrar o IP e o Código de Acesso da sua impressora?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Passo 3: Pingue o endereço IP para verificar a perda de pacotes e a latência." +msgid "Connect" +msgstr "Conectar" -msgid "Test" -msgstr "Testar" +msgid "Manual Setup" +msgstr "Configuração Manual" msgid "IP and Access Code Verified! You may close the window" msgstr "IP e Código de Acesso Verificados! Você pode fechar a janela" +msgid "connecting..." +msgstr "conectando…" + +msgid "Failed to connect to printer." +msgstr "Falha ao conectar à impressora." + +msgid "Failed to publish login request." +msgstr "Falha ao publicar solicitação de login." + +msgid "The printer has already been bound." +msgstr "A impressora já foi vinculada." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" +"O modo da impressora está incorreto, por favror alterne para Somente LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Conectando à impressora... A caixa de diálogo será fechada depois" + msgid "Connection failed, please double check IP and Access Code" -msgstr "Falha na conexão, por favor, verifique o IP e o Código de Acesso" +msgstr "Falha na conexão, por favor verifique o IP e o Código de Acesso" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" "Conexão falhou! Se o seu IP e Código de Acesso estão corretos, \n" -"por favor, passe para o passo 3 para resolver problemas de rede" +"por favor passe para o passo 3 para resolver problemas de rede" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "falha no envio" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "Bomba de Ar" + +msgid "Laser 10W" +msgstr "Laser 10W" + +msgid "Laser 40W" +msgstr "Laser 40W" + +msgid "Cutting Module" +msgstr "Módulo de Corte" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" msgstr "Modelo:" -msgid "Serial:" -msgstr "Número de série:" - -msgid "Version:" -msgstr "Versão:" - msgid "Update firmware" msgstr "Atualizar firmware" msgid "Beta version" msgstr "Versão beta" -msgid "Latest version" -msgstr "Última versão" - msgid "Updating" msgstr "Atualizando" -msgid "Updating failed" +msgid "Update failed" msgstr "Falha na atualização" -msgid "Updating successful" +msgid "Update successful" msgstr "Atualização bem-sucedida" msgid "" @@ -8957,8 +10874,8 @@ msgstr "" msgid "Extension Board" msgstr "Mesa de Extensão" -msgid "Saving objects into the 3mf failed." -msgstr "Falha ao salvar objetos no formato 3mf." +msgid "Saving objects into the 3MF failed." +msgstr "Falha ao salvar objetos no formato 3MF." msgid "Only Windows 10 is supported." msgstr "Apenas o Windows 10 é suportado." @@ -8981,23 +10898,23 @@ msgstr "Falha na reparação." msgid "Loading repaired objects" msgstr "Carregando objetos reparados" -msgid "Exporting 3mf file failed" -msgstr "Falha ao exportar o arquivo 3mf" +msgid "Exporting 3MF file failed" +msgstr "Falha ao exportar o arquivo 3MF" -msgid "Import 3mf file failed" -msgstr "Falha ao importar o arquivo 3mf" +msgid "Import 3MF file failed" +msgstr "Falha ao importar o arquivo 3MF" -msgid "Repaired 3mf file does not contain any object" -msgstr "O arquivo 3mf reparado não contém nenhum objeto" +msgid "Repaired 3MF file does not contain any object" +msgstr "O arquivo 3MF reparado não contém nenhum objeto" -msgid "Repaired 3mf file contains more than one object" -msgstr "O arquivo 3mf reparado contém mais de um objeto" +msgid "Repaired 3MF file contains more than one object" +msgstr "O arquivo 3MF reparado contém mais de um objeto" -msgid "Repaired 3mf file does not contain any volume" -msgstr "O arquivo 3mf reparado não contém nenhum volume" +msgid "Repaired 3MF file does not contain any volume" +msgstr "O arquivo 3MF reparado não contém nenhum volume" -msgid "Repaired 3mf file contains more than one volume" -msgstr "O arquivo 3mf reparado contém mais de um volume" +msgid "Repaired 3MF file contains more than one volume" +msgstr "O arquivo 3MF reparado contém mais de um volume" msgid "Repair finished" msgstr "Reparo concluído" @@ -9050,10 +10967,17 @@ msgid "No object can be printed. Maybe too small" msgstr "Nenhum objeto pode ser impresso. Talvez seja muito pequeno" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Sua impressão está muito próxima das regiões de preparação. Certifique-se de " +"que não haverá colisão." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"Falha ao gerar o código G para um G-code personalizado inválido.\n" +"Falha ao gerar o G-code para um G-code personalizado inválido.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." @@ -9061,19 +10985,28 @@ msgstr "Verifique o G-code personalizado ou use o G-code personalizado padrão." #, boost-format msgid "Generating G-code: layer %1%" -msgstr "Gerando código G: camada %1%" +msgstr "Gerando G-code: camada %1%" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" msgid "Inner wall" -msgstr "Perímetro interno" +msgstr "Parede interna" msgid "Outer wall" -msgstr "Perímetro externo" +msgstr "Parede externa" msgid "Overhang wall" -msgstr "Overhang" +msgstr "Parede saliente" msgid "Sparse infill" -msgstr "Preenchimento" +msgstr "Preenchimento esparso" msgid "Internal solid infill" msgstr "Preenchimento sólido" @@ -9100,7 +11033,7 @@ msgid "Multiple" msgstr "Múltiplo" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Falha ao calcular a largura da linha de %1%. Não é possível obter o valor de " "\"%2%\". " @@ -9220,16 +11153,18 @@ msgstr "%1% está muito perto de outros, e colisões podem ocorrer." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% está muito alto, e ocorrerão colisões." -msgid " is too close to others, there may be collisions when printing." -msgstr " está muito perto de outros, pode haver colisões durante a impressão." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " está muito perto da área de exclusão, pode haver colisões durante a " "impressão." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" -msgstr "Torre Prime" +msgstr "Torre de Preparo" msgid " is too close to others, and collisions may be caused.\n" msgstr " está muito perto de outros, e colisões podem ocorrer.\n" @@ -9238,13 +11173,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr " está muito perto da área de exclusão, e ocorrerão colisões.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Não é possível imprimir vários filamentos que têm grande diferença de " -"temperatura juntos. Caso contrário, o extrusor e a bocal podem ficar " -"bloqueados ou danificados durante a impressão" msgid "No extrusions under current settings." msgstr "Nenhuma extrusão com as configurações atuais." @@ -9256,6 +11212,15 @@ msgstr "" "O modo suave do timelapse não é suportado quando a sequência \"por objeto\" " "está ativada." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9270,6 +11235,14 @@ msgstr "" "O modo de vaso espiral não funciona quando um objeto contém mais de um " "material." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Embora o objeto %1% caiba no volume de construção, ele excede a altura " +"máxima do volume de construção devido à compensação de contração do material." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "O objeto %1% excede a altura máxima do volume de impressão." @@ -9293,70 +11266,89 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "A altura de camada variável não é suportada com suportes orgânicos." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Diâmetros de bico diferentes e diâmetros de filamento diferentes não são " -"permitidos quando a Torre Prime está ativa." +"Diferentes diâmetros de bico e diferentes diâmetros de filamento podem não " +"funcionar bem quando a torre de preparo estiver habilitada. É muito " +"experimental, então prossiga com cautela." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"A Torre Prime atualmente só é suportada com o endereçamento relativo da " +"A Torre de Limpeza só é suportada atualmente com o endereçamento relativo da " "extrusora (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"A prevenção de vazamento atualmente não é suportada com a Torre Prime ativa." +"A prevenção de vazamento só é suportada pela torre de limpeza quando " +"'single_extruder_multi_material' está desativado." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" -"A Torre Prime atualmente só é suportada para os G-code do tipo Marlin, " +"A torre de preparo atualmente só é suportada para os G-code do tipo Marlin, " "RepRap/Sprinter, RepRapFirmware e Repetier." msgid "The prime tower is not supported in \"By object\" print." -msgstr "A Torre Prime não é suportada na impressão \"Por objeto\"." +msgstr "A torre de preparo não é suportada na impressão \"Por objeto\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"A Torre Prime não é suportada quando a altura de camada adaptativa está " +"A torre de preparo não é suportada quando a altura de camada adaptativa está " "ativa. Isso requer que todos os objetos tenham a mesma altura de camada." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" -"A Torre Prime requer que o \"lacuna de suporte\" seja múltiplo da altura da " -"camada" +"A torre de preparo requer que o \"vão de suporte\" seja múltiplo da altura " +"da camada." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" -"A Torre Prime requer que todos os objetos tenham as mesmas alturas de camada" +"A torre de preparo requer que todos os objetos tenham as mesmas alturas de " +"camada." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" -"A Torre Prime requer que todos os objetos sejam impressos sobre o mesmo " -"número de camadas da Jangada." +"A torre de preparo requer que todos os objetos sejam impressos sobre o mesmo " +"número de camadas da jangada." + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"A torre de preparo só é suportada para vários objetos se eles forem " +"impressos com a mesma support_top_z_distance." msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"A Torre Prime requer que todos os objetos sejam fatiados com as mesmas " +"A torre de preparo requer que todos os objetos sejam fatiados com as mesmas " "alturas de camada." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" -"A Torre Prime só é suportada se todos os objetos tiverem a mesma altura de " -"camada variável" +"A torre de preparo só é suportada se todos os objetos tiverem a mesma altura " +"de camada variável." + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Um ou mais objetos foram atribuídos a uma extrusora que a impressora não " +"possui." msgid "Too small line width" msgstr "Largura de linha muito pequena" @@ -9364,10 +11356,21 @@ msgstr "Largura de linha muito pequena" msgid "Too large line width" msgstr "Largura de linha muito grande" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Impressão com múltiplas extrusoras de diferentes diâmetros de bicos. Se o " +"suporte for impresso com o filamento atual (support_filament == 0 ou " +"support_interface_filament == 0), todos os bicos devem ter o mesmo diâmetro." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"A Torre Prime requer que o suporte tenha a mesma altura de camada do objeto." +"A torre de preparo requer que o suporte tenha a mesma altura de camada do " +"objeto." msgid "" "Organic support tree tip diameter must not be smaller than support material " @@ -9396,35 +11399,35 @@ msgstr "" "Os reforços de suporte são usados, mas o suporte não está habilitado. Por " "favor, habilite o suporte." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "A altura da camada não pode exceder o diâmetro da bocal" +msgid "Layer height cannot exceed nozzle diameter." +msgstr "A altura da camada não pode exceder o diâmetro do bico." msgid "" "Relative extruder addressing requires resetting the extruder position at " "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" -"O endereçamento relativo do extrusor requer a reinicialização da posição do " -"extrusor em cada camada para evitar perda de precisão de ponto flutuante. " -"Adicione \"G92 E0\" ao código de camada." +"O endereçamento relativo da extrusora requer a reinicialização da posição da " +"extrusora em cada camada para evitar perda de precisão de ponto flutuante. " +"Adicione \"G92 E0\" ao layer_gcode." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" "\"G92 E0\" foi encontrado em before_layer_gcode, o que é incompatível com o " -"endereçamento absoluto do extrusor." +"endereçamento absoluto da extrusora." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" "\"G92 E0\" foi encontrado em layer_gcode, o que é incompatível com o " -"endereçamento absoluto do extrusor." +"endereçamento absoluto da extrusora." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "Mesa %d: %s não suporta filamento %s" +msgstr "Placa %d: %s não suporta filamento %s" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" @@ -9447,6 +11450,21 @@ msgstr "" "Você pode ajustar a configuração de jerk máximo na configuração da sua " "impressora para obter velocidades mais altas." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"A configuração de desvio de junção excede o valor máximo da impressora " +"(machine_max_junction_deviation).\n" +"O Orca limitará automaticamente o desvio de junção para garantir que ele não " +"ultrapasse as capacidades da impressora.\n" +"Você pode ajustar o valor do machine_max_junction_deviation na configuração " +"da sua impressora para obter limites mais altos." + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9477,6 +11495,20 @@ msgstr "" "Você pode ajustar o valor de machine_max_acceleration_travel na configuração " "da sua impressora para obter velocidades mais altas." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"A opção de parede precisa será ignorada para sequências externa-interna ou " +"interna-externa-interna." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"A contração de filamento não será usada porque a contração dos filamentos " +"usados difere significativamente." + msgid "Generating skirt & brim" msgstr "Gerando saia e borda" @@ -9487,11 +11519,17 @@ msgid "Generating G-code" msgstr "Gerando G-code" msgid "Failed processing of the filename_format template." -msgstr "Falha no processamento do modelo filename_format." +msgstr "Falha no processamento do gabarito filename_format." + +msgid "Printer technology" +msgstr "Tecnologia da impressora" msgid "Printable area" msgstr "Área de impressão" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Área de exclusão da mesa" @@ -9515,10 +11553,11 @@ msgid "Elephant foot compensation" msgstr "Compensação de pé de elefante" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"Reduza a primeira camada na mesa para compensar o efeito de pé de elefante" +"Encolhe a primeira camada na placa de impressão para compensar o efeito de " +"pé de elefante." msgid "Elephant foot compensation layers" msgstr "Camadas de compensação de pé de elefante" @@ -9539,35 +11578,43 @@ msgstr "camadas" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Altura de fatiamento para cada camada. Altura de camada menor significa mais " -"precisão e mais tempo de impressão" +"precisão e maior tempo de impressão." msgid "Printable height" msgstr "Altura de impressão" -msgid "Maximum printable height which is limited by mechanism of printer" -msgstr "Altura máxima de impressão limitada pelo mecanismo da impressora" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "Altura máxima de impressão limitada pelo mecanismo da impressora." + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" msgid "Preferred orientation" msgstr "Orientação preferida" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" "Orientar automaticamente os arquivos STL no eixo Z durante a importação " -"inicial" +"inicial." msgid "Printer preset names" -msgstr "Nomes de presets da impressora" +msgstr "Nomes de predefinições de impressora" msgid "Use 3rd-party print host" msgstr "Usar host de impressão de terceiros" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "Permitir o controle da impressora BambuLab por meio de hosts de impressão de " -"terceiros" +"terceiros." msgid "Hostname, IP or URL" msgstr "Nome do host, IP ou URL" @@ -9589,10 +11636,10 @@ msgid "Device UI" msgstr "Interface do dispositivo" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Especifique a URL da interface do usuário do seu dispositivo se não for a " -"mesma do print_host" +"mesma do print_host." msgid "API Key / Password" msgstr "Chave da API / Senha" @@ -9604,8 +11651,8 @@ msgstr "" "O Snapmaker Orca pode enviar arquivos G-code para um host de impressora. Este " "campo deve conter a Chave da API ou a senha necessária para autenticação." -msgid "Name of the printer" -msgstr "Nome da impressora" +msgid "Name of the printer." +msgstr "Nome da impressora." msgid "HTTPS CA File" msgstr "Arquivo CA HTTPS" @@ -9637,8 +11684,8 @@ msgstr "" "distribuição ausentes ou offline. Pode-se querer habilitar esta opção para " "certificados autoassinados se a conexão falhar." -msgid "Names of presets related to the physical printer" -msgstr "Nomes dos presets relacionados à impressora física" +msgid "Names of presets related to the physical printer." +msgstr "Nomes das predefinições relacionados à impressora física." msgid "Authorization Type" msgstr "Tipo de autorização" @@ -9649,27 +11696,28 @@ msgstr "API Key" msgid "HTTP digest" msgstr "Digest HTTP" -msgid "Avoid crossing wall" -msgstr "Evitar perímetros" +msgid "Avoid crossing walls" +msgstr "Evitar atravessar paredes" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -"Desvio e evite viajar através do perímetro que pode causar irregularidade na " -"superfície" +"Desviar para evitar atravessar paredes, que pode causar irregularidades na " +"superfície." -msgid "Avoid crossing wall - Max detour length" -msgstr "Evitar perímetros - Distância máximo do desvio" +msgid "Avoid crossing walls - Max detour length" +msgstr "Evitar atravessar paredes - Distância máximo do desvio" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Distância máxima de desvio para evitar atravessar o perímetro. Não desviar " -"se a distância de desvio for maior que esse valor. A distancia do desvio " -"pode ser especificada como um valor absoluto ou como porcentagem (por " -"exemplo, 50%) de um caminho de deslocamento direto. Zero para desativar" +"Distância máxima de desvio para evitar atravessar paredes. Não desviar se a " +"distância de desvio for maior que esse valor. A distancia do desvio pode ser " +"especificada como um valor absoluto ou como porcentagem (por exemplo, 50%) " +"de um caminho de deslocamento direto. Zero para desativar." msgid "mm or %" msgstr "mm ou %" @@ -9678,40 +11726,46 @@ msgid "Other layers" msgstr "Outras camadas" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" "Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " -"filamento não suporta a impressão na Cool Plate (Mesa Fria)" - -msgid "°C" -msgstr "°C" +"filamento não suporta a impressão na Placa Fria SuperTack." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" -msgstr "" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " -"filamento não suporta a impressão no Engenharia Plate" +"filamento não suporta a impressão na Placa Fria." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " -"filamento não suporta a impressão no Plate de Alta Temperatura" +"filamento não suporta a impressão na Placa Fria Texturizada." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " -"filamento não suporta a impressão no Plate de PEI Texturizado" +"filamento não suporta a impressão na Placa de Engenharia." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " +"filamento não suporta a impressão na Placa de Alta Temperatura." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Temperatura da mesa para camadas exceto a inicial. O valor 0 significa que o " +"filamento não suporta a impressão na Placa PEI Texturizada." msgid "Initial layer" msgstr "Primeira camada" @@ -9720,119 +11774,167 @@ msgid "Initial layer bed temperature" msgstr "Temperatura da mesa da primeira camada" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " -"não suporta a impressão na Cool Plate (Mesa Fria)" +"não suporta a impressão na Placa Fria SuperTack." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" -msgstr "" - -msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " -"não suporta a impressão no Engenharia Plate" +"não suporta a impressão na Placa Fria." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " -"não suporta a impressão no Plate de Alta Temperatura" +"não suporta a impressão na Placa Fria Texturizada." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " -"não suporta a impressão no Plate de PEI Texturizado" +"não suporta a impressão na Placa de Engenharia." -msgid "Bed types supported by the printer" -msgstr "Tipos de mesa suportadas pela impressora" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." +msgstr "" +"Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " +"não suporta a impressão na Placa de Alta Temperatura." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Temperatura da mesa na primeira camada. O valor 0 significa que o filamento " +"não suporta a impressão na Placa PEI Texturizada." + +msgid "Bed types supported by the printer." +msgstr "Tipos de placa suportadas pela impressora." msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Engenharia Plate" +msgstr "Placa Fria Lisa" msgid "Smooth High Temp Plate" -msgstr "" +msgstr "Placa de Alta Temp. Lisa" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "Tipo de placa padrão" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" +"Tipo de placa padrão para a impressora (suporta formato numérico ou string)." msgid "First layer print sequence" msgstr "Sequência de impressão da primeira camada" msgid "Other layers print sequence" -msgstr "Sequência de impressão de outras camadas" +msgstr "Sequência de impressão das outras camadas" msgid "The number of other layers print sequence" -msgstr "O número de sequência de impressão de outras camadas" +msgstr "O número de sequência de impressão das outras camadas" msgid "Other layers filament sequence" msgstr "Sequência de impressão de outros filamentos" -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "Este código G é inserido em cada mudança de camada antes de levantar z" +msgid "This G-code is inserted at every layer change before the Z lift." +msgstr "Este G-code é inserido em cada mudança de camada antes da elevação Z." msgid "Bottom shell layers" -msgstr "Camadas de base" +msgstr "Camadas da casca de base" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" -"Este é o número de camadas sólidas da base, incluindo a primeira camada. " -"Quando a espessura calculada por este valor for mais fina do que a espessura " -"da base, o número das camadas da base serão aumentadas" +"Este é o número de camadas sólidas da casca de base, incluindo a primeira " +"camada. Quando a espessura calculada por este valor for mais fina do que a " +"espessura da base, o número de camadas da casca de base será aumentado." msgid "Bottom shell thickness" -msgstr "Espessura da base" +msgstr "Espessura da casca de base" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "O número de camadas sólidas da base é aumentado ao fatiar se a espessura " -"calculada pelas camadas da base for mais fina do que este valor. Isso pode " -"evitar que a base seja muito fina quando a altura da camada é pequena. 0 " -"significa que esta configuração está desativada e a espessura da base é " -"absolutamente determinada pelas camadas da base" +"calculada pelas camadas de casca de base for mais fina do que este valor. " +"Isso pode evitar que a casca de base seja muito fina quando a altura da " +"camada é pequena. 0 significa que esta configuração está desativada e a " +"espessura da casca de base é absolutamente determinada pelas camadas de " +"casca de base." msgid "Apply gap fill" -msgstr "Preenchimento de vão" +msgstr "Aplicar preenchimento de vão" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Ativa o preenchimento de vão para as superfícies selecionadas. O comprimento " -"mínimo do vão que será preenchida pode ser controlado a partir da opção de " -"filtrar pequenas s abaixo.\n" +"Ativa o preenchimento de vãos para as superfícies sólidas selecionadas. O " +"comprimento mínimo do vão que será preenchido pode ser controlado na opção " +"filtrar vãos pequenos abaixo.\n" "\n" "Opções:\n" -"1. Em todos os lugares: Aplica preenchimento de s às superfícies sólidas " -"superior, inferior e interna\n" -"2. Superfícies superior e inferior: Aplica preenchimento de s apenas às " -"superfícies superior e inferior\n" -"3. Em nenhum lugar: Desativa o preenchimento de s\n" +"1. Sempre: aplica o preenchimento de vãos às superfícies sólidas superior, " +"inferior e interna para máxima resistência;\n" +"2. Superfícies superior e inferior: aplica o preenchimento de vãos somente " +"às superfícies superior e inferior, equilibrando a velocidade de impressão, " +"reduzindo o potencial de sobreextrusão no preenchimento sólido e garantindo " +"que as superfícies superior e inferior não tenham vãos de furo de alfinete;\n" +"3. Nunca: desabilita o preenchimento de vãos para todas as áreas de " +"preenchimento sólido.\n" +"\n" +"Observe que se estiver usando o gerador de perímetro clássico, o " +"preenchimento de vãos também pode ser gerado entre perímetros, se uma linha " +"de largura total não couber entre eles. Esse preenchimento de vãos de " +"perímetro não é controlado por esta configuração.\n" +"\n" +"Se você quiser que todo o preenchimento de vãos, incluindo o perímetro " +"clássico gerado, seja removido, defina o valor do filtro de pequenas lacunas " +"para um número grande, como 999999.\n" +"\n" +"No entanto, isso não é aconselhável, pois o preenchimento de vãos entre " +"perímetros está contribuindo para a resistência do modelo. Para modelos em " +"que o preenchimento de vãos excessivo é gerado entre perímetros, uma opção " +"melhor seria alternar para o gerador de parede arachne e usar esta opção " +"para controlar se o preenchimento de vãos de superfície superior e inferior " +"cosmética é gerado." msgid "Everywhere" msgstr "Sempre" @@ -9843,73 +11945,154 @@ msgstr "Superfícies superior e inferior" msgid "Nowhere" msgstr "Nunca" -msgid "Force cooling for overhang and bridge" -msgstr "Forçar resfriamento para overhangs e pontes" +msgid "Force cooling for overhangs and bridges" +msgstr "Resfriamento forçado para saliências e pontes" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Ative esta opção para otimizar a velocidade do ventilador de resfriamento de " -"peças para overhangs e ponte para obter melhor resfriamento" +"Habilite esta opção para permitir o ajuste da velocidade do ventilador de " +"resfriamento de peças especificamente para saliências, pontes internas e " +"externas. Definir a velocidade do ventilador especificamente para esses " +"recursos pode melhorar a qualidade geral da impressão e reduzir a deformação." -msgid "Fan speed for overhang" -msgstr "Velocidade do ventilador para overhangs" +msgid "Overhangs and external bridges fan speed" +msgstr "Velocidade do ventilador para saliências e pontes externas" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Forçar o ventilador de resfriamento da peça a ser nesta velocidade ao " -"imprimir ponte ou overhang que tenha um grande grau de inclinação. Forçar o " -"resfriamento para overhang e ponte pode obter melhor qualidade para estas " -"partes" +"Use esta parte da velocidade do ventilador de resfriamento ao imprimir " +"pontes ou paredes salientes com um limite de saliência que exceda o valor " +"definido no parâmetro 'Limiar de resfriamento de saliências' acima. Aumentar " +"o resfriamento especificamente para saliências e pontes pode melhorar a " +"qualidade geral de impressão desses recursos.\n" +"\n" +"Observe que esta velocidade do ventilador é fixada na extremidade inferior " +"pelo limiar mínimo de velocidade do ventilador definido acima. Ela também é " +"ajustada para cima até o limiar máximo de velocidade do ventilador quando o " +"limiar mínimo de tempo da camada não é atingido." -msgid "Cooling overhang threshold" -msgstr "Overhang limiar de resfriamento" +msgid "Overhang cooling activation threshold" +msgstr "Limiar de ativação de resfriamento de saliência" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Forçar o ventilador de resfriamento a ser uma velocidade específica quando o " -"grau de inclinação da peça impressa excede este valor. Expresso como " -"porcentagem, que indica quanto da largura da linha sem suporte da camada " -"inferior.Zero significa forçar o resfriamento para toda o perímetro externo, " -"não importa quanto seja o grau de inclinação" +"Quando a saliência excede esse limiar especificado, força o ventilador de " +"resfriamento a funcionar na 'Velocidade da ventoinha de saliência' definida " +"abaixo. Esse limiar é expresso como uma porcentagem, indicando a parte da " +"largura de cada linha que não é suportada pela camada abaixo dela. Definir " +"esse valor como 0% força o ventilador de resfriamento a funcionar para todas " +"as paredes externas, independentemente do grau de saliência." -msgid "Bridge infill direction" -msgstr "Direção de preenchimento de ponte" +msgid "External bridge infill direction" +msgstr "Direção de preenchimento de ponte externa" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Substituição de ângulo de ponte. Se deixado em zero, o ângulo de ponte será " "calculado automaticamente. Caso contrário, o ângulo fornecido será usado " "para pontes externas. Use 180° para ângulo zero." -msgid "Bridge density" -msgstr "Densidade de ponte" +msgid "Internal bridge infill direction" +msgstr "Direção de preenchimento de ponte interna" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Densidade de pontes externas. 100% significa ponte sólida. O padrão é 100%." +"Substituição do ângulo de ponte interna. Se deixado em zero, o ângulo de " +"ponte será calculado automaticamente. Caso contrário, o ângulo fornecido " +"será usado para pontes internas. Use 180° para ângulo zero.\n" +"\n" +"É recomendável deixá-lo em 0, a menos que haja um modelo específico que não " +"precise." + +msgid "External bridge density" +msgstr "Densidade de ponte externa" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Controla a densidade (espaçamento) das linhas de pontes externas. 100% " +"significa ponte sólida. O padrão é 100%.\n" +"\n" +"Pontes externas de menor densidade podem ajudar a melhorar a confiabilidade, " +"pois há mais espaço para o ar circular ao redor da ponte extrudada, " +"melhorando sua velocidade de resfriamento." + +msgid "Internal bridge density" +msgstr "Densidade de ponte interna" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Controla a densidade (espaçamento) das linhas de ponte interna. 100% " +"significa ponte sólida. O padrão é 100%.\n" +"\n" +"Pontes internas de menor densidade podem ajudar a reduzir as almofadas da " +"superfície superior e melhorar a confiabilidade da ponte interna, pois há " +"mais espaço para o ar circular ao redor da ponte extrudada, melhorando sua " +"velocidade de resfriamento.\n" +"\n" +"Esta opção funciona particularmente bem quando combinada com a segunda opção " +"de ponte interna sobre preenchimento, melhorando ainda mais a estrutura de " +"ponte interna antes que o preenchimento sólido seja extrudado." msgid "Bridge flow ratio" msgstr "Fluxo em ponte" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Diminua ligeiramente este valor (por exemplo, 0.9) para reduzir a quantidade " -"de material para ponte, para melhorar a flacidez" +"Diminua esse valor ligeiramente (por exemplo, 0,9) para reduzir a quantidade " +"de material para a ponte, para melhorar a flacidez.\n" +"\n" +"O fluxo real da ponte usado é calculado multiplicando esse valor pela taxa " +"de fluxo do filamento e, se definido, pela taxa de fluxo do objeto." msgid "Internal bridge flow ratio" msgstr "Fluxo em ponte interna" @@ -9917,58 +12100,176 @@ msgstr "Fluxo em ponte interna" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"Este valor governa a espessura da camada interna da ponte. Esta é a primeira " -"camada sobre o preenchimento. Diminua ligeiramente este valor (por exemplo, " -"0.9) para melhorar a qualidade da superfície sobre o preenchimento " -"esparsamente." +"Este valor governa a espessura da camada de ponte interna. Esta é a primeira " +"camada sobre o preenchimento esparso. Diminua este valor ligeiramente (por " +"exemplo, 0,9) para melhorar a qualidade da superfície sobre o preenchimento " +"esparso.\n" +"\n" +"O fluxo de ponte interna real usado é calculado multiplicando este valor " +"pela taxa de fluxo de ponte, a taxa de fluxo de filamento e, se definido, a " +"taxa de fluxo do objeto." msgid "Top surface flow ratio" msgstr "Fluxo em superfície superior" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Este fator afeta a quantidade de material para o preenchimento sólido " +"Este fator afeta a quantidade de material para preenchimento sólido " "superior. Você pode diminuí-lo ligeiramente para ter um acabamento de " -"superfície suave" +"superfície suave.\n" +"\n" +"O real fluxo de superfície superior usado é calculado multiplicando este " +"valor pela taxa de fluxo do filamento e, se definido, pela taxa de fluxo do " +"objeto." msgid "Bottom surface flow ratio" msgstr "Fluxo em superfície inferior" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Este fator afeta a quantidade de material para preenchimento sólido do " +"fundo.\n" +"\n" +"O real fluxo de preenchimento sólido do fundo usado é calculado " +"multiplicando este valor pela taxa de fluxo do filamento e, se definido, " +"pela taxa de fluxo do objeto." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Este fator afeta a quantidade de material para o preenchimento sólido " -"inferior" msgid "Precise wall" msgstr "Parede precisa" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Melhore a precisão da parede ajustando o espaçamento do perímetro externo. " -"Isso também melhora a consistência da camada.\n" -"Nota: Esta configuração só terá efeito se a sequência do perímetro estiver " -"configurada para Interior-Exterior" +"Melhora a precisão da casca ajustando o espaçamento da parede externa. Isso " +"também melhora a consistência da camada. Nota: Esta opção será ignorada se a " +"sequência da parede for externa-interna ou interna-externa-interna." msgid "Only one wall on top surfaces" -msgstr "Perímetro único em superfícies superiores" +msgstr "Parede única em superfícies superiores" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" -"Use apenas um perímetro em superfície superior, para dar mais espaço ao " -"padrão de preenchimento superior" +"Use apenas uma parede em superfícies superiores, para dar mais espaço ao " +"padrão de preenchimento superior." msgid "One wall threshold" -msgstr "Limite de perímetro único" +msgstr "Limiar de parede única" #, no-c-format, no-boost-format msgid "" @@ -9992,51 +12293,51 @@ msgstr "" "configuração para 0 para remover esses artefatos." msgid "Only one wall on first layer" -msgstr "Perímetro único na primeira camada" +msgstr "Parede única na primeira camada" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" -"Use apenas um perímetro na primeira camada, para dar mais espaço ao padrão " -"de preenchimento inferior" +"Use apenas uma parede na primeira camada, para dar mais espaço ao padrão de " +"preenchimento inferior." msgid "Extra perimeters on overhangs" -msgstr "Perímetros extras em overhangs" +msgstr "Paredes extras em saliências" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Crie caminhos de perímetro adicionais em overhangs íngremes e áreas onde " -"pontes não podem ser ancoradas. " +"Crie caminhos de perímetro adicionais em saliências íngremes e áreas onde " +"pontes não podem ser ancoradas." -msgid "Reverse on odd" -msgstr "Inverter em ímpares" +msgid "Reverse on even" +msgstr "Reversão em par" msgid "Overhang reversal" -msgstr "Reversão de suspensão" +msgstr "Reversão de saliência" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Extruir perímetros, que tenham uma parte sobre um overhang, na direção " -"reversa em camadas ímpares. Este padrão alternado pode melhorar " -"drasticamente perímetros íngremes.\n" +"Extrusar perímetros que tenham uma parte sobre uma saliência na direção " +"reversa em camadas uniformes. Esse padrão alternado pode melhorar " +"drasticamente saliências íngremes.\n" "\n" -"Este ajuste também pode ajudar a reduzir a deformação da peça devido à " -"redução das tensões nas paredes da peça." +"Essa configuração também pode ajudar a reduzir a deformação das peças devido " +"à redução de tensões nas paredes das peças." msgid "Reverse only internal perimeters" -msgstr "Inverter apenas os perímetros internos" +msgstr "Reverter apenas os perímetros internos" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10045,22 +12346,23 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Aplicar a lógica de perímetros reversos apenas em perímetros internos.\n" +"Aplique a lógica de perímetros reversos somente em perímetros internos.\n" "\n" -"Este ajuste reduz muito as tensões na peça, já que agora são distribuídas em " -"direções alternadas. Isso deve reduzir a deformação da peça, mantendo a " -"qualidade do perímetro externo. Este recurso pode ser muito útil para " -"materiais propensos a deformações, como ABS/ASA, e também para filamentos " -"elásticos, como TPU e Silk PLA. Também pode ajudar a reduzir a deformação em " -"regiões flutuantes sobre suportes.\n" +"Esta configuração reduz muito as tensões das peças, pois elas agora são " +"distribuídas em direções alternadas. Isso deve reduzir a deformação das " +"peças, mantendo também a qualidade da parede externa. Este recurso pode ser " +"muito útil para materiais propensos à deformação, como ABS/ASA, e também " +"para filamentos elásticos, como TPU e Silk PLA. Também pode ajudar a reduzir " +"a deformação em regiões flutuantes sobre suportes.\n" "\n" -"Para que este ajuste seja mais eficaz, recomenda-se definir o Limiar Reverso " -"como 0 para que todos os perímetros internos sejam impressos em direções " -"alternadas em camadas ímpares, independentemente de seu grau de ." +"Para que essa configuração seja mais eficaz, é recomendável definir o Limiar " +"Reverso como 0 para que todas as paredes internas sejam impressas em " +"direções alternadas em camadas uniformes, independentemente do grau de " +"saliência." msgid "Bridge counterbore holes" msgstr "Pontes para furos rebaixados" @@ -10068,16 +12370,15 @@ msgstr "Pontes para furos rebaixados" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Esta opção cria pontes para furos rebaixados, permitindo que sejam impressos " "sem suporte. Os modos disponíveis incluem:\n" -"1. Nenhum: Nenhuma ponte é criada.\n" -"2. Parcialmente Ponteada: Apenas uma parte da área não suportada será " -"ponteada.\n" -"3. Camada Sacrificial: Uma camada completa de ponte sacrificial é criada." +"1. Nenhum: Nenhuma ponte é criada\n" +"2. Ponte parcial: Apenas uma parte da área não suportada será ponteada\n" +"3. Camada de sacrifício: Uma camada completa de ponte sacrificial é criada" msgid "Partially bridged" msgstr "Ponte parcial" @@ -10086,79 +12387,115 @@ msgid "Sacrificial layer" msgstr "Camada de sacrifício" msgid "Reverse threshold" -msgstr "Limiar de inversão" +msgstr "Limiar reverso" msgid "Overhang reversal threshold" -msgstr "Limiar de inversão de overhang" +msgstr "Limiar de reversão de saliência" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Número de milímetros que o precisa ter para que a reversão seja considerada " -"útil. Pode ser um % da largura do perímetro.\n" -"O valor 0 permite a reversão em todas as camadas ímpares independentemente." - -msgid "Classic mode" -msgstr "Modo clássico" - -msgid "Enable this option to use classic mode" -msgstr "Ative esta opção para usar o modo clássico" +"Número de mm que a saliência precisa ter para que a reversão seja " +"considerada útil. Pode ser uma % da largura do perímetro.\n" +"O valor 0 permite a reversão em todas as camadas pares, sempre.\n" +"Quando Detectar parede saliente não está habilitado, esta opção é ignorada e " +"a reversão acontece em todas as camadas pares, sempre." msgid "Slow down for overhang" -msgstr "Reduzir velocidade em overhangs" +msgstr "Reduzir velocidade em saliências" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" -"Ative esta opção para diminuir a velocidade de impressão em diferentes graus " -"de inclinação" +"Ative esta opção para diminuir a velocidade de impressão para diferentes de " +"degraus de saliência." msgid "Slow down for curled perimeters" msgstr "Reduzir vel. para perímetros encurvados" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Ative esta opção para diminuir a velocidade de impressão em áreas onde podem " -"existir potenciais perímetros curvados (warping)" +"Habilite esta opção para desacelerar a impressão em áreas onde os perímetros " +"podem ter se curvado para cima. Por exemplo, uma desaceleração adicional " +"será aplicada ao imprimir saliências em cantos afiados, como a parte frontal " +"do casco Benchy, reduzindo a curvatura que se acumula por várias camadas.\n" +"\n" +"Geralmente, é recomendável ter esta opção ativada, a menos que o " +"resfriamento da impressora seja potente o suficiente ou a velocidade de " +"impressão lenta o suficiente para que a curvatura do perímetro não aconteça. " +"Se estiver imprimindo com uma alta velocidade de perímetro externo, este " +"parâmetro pode introduzir pequenos artefatos ao desacelerar devido à grande " +"variação nas velocidades de impressão. Se você notar artefatos, certifique-" +"se de que seu avanço de pressão esteja ajustado corretamente.\n" +"\n" +"Observação: quando esta opção estiver habilitada, os perímetros de saliência " +"são tratados como saliências, o que significa que a velocidade de saliência " +"é aplicada mesmo se o perímetro de saliência for parte de uma ponte. Por " +"exemplo, quando os perímetros estiverem 100% salientes, sem nenhuma parede " +"apoiando-os por baixo, a velocidade de saliência de 100% será aplicada." msgid "mm/s or %" msgstr "mm/s ou %" -msgid "External" -msgstr "Externo" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Velocidade de ponte e paredes compostas completamente de overhangs" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Velocidade das extrusões de pontes visíveis externamente.\n" +"\n" +"Além disso, se Desacelerar para perímetros curvos estiver desabilitado ou o " +"Modo de saliência clássico estiver habilitado, será a velocidade de " +"impressão de paredes de saliência que são suportadas por menos de 13%, sejam " +"elas parte de uma ponte ou de uma saliência." msgid "Internal" msgstr "Interno" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Velocidade da ponte interna. Se o valor for expresso como porcentagem, será " -"calculado com base na velocidade da ponte. O valor padrão é 150%." +"Velocidade de pontes internas. Se o valor for expresso como uma porcentagem, " +"ele será calculado com base na bridge_speed. O valor padrão é 150%." msgid "Brim width" msgstr "Largura da borda" -msgid "Distance from model to the outermost brim line" -msgstr "Distância do modelo até a linha da borda mais externa" +msgid "Distance from model to the outermost brim line." +msgstr "Distância do modelo até a linha da borda mais externa." msgid "Brim type" msgstr "Tipo de borda" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Isso controla a geração da borda no lado externo e/ou interno dos modelos. " "Automático significa que a largura da borda é analisada e calculada " @@ -10169,10 +12506,10 @@ msgstr "Espaço entre a borda e objeto" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"Um espaço entre a linha da borda mais interna e o objeto pode facilitar a " -"remoção da borda" +"Um espaço entre a linha mais interna da borda e o objeto pode facilitar a " +"remoção da borda." msgid "Brim ears" msgstr "Orelhas da borda" @@ -10184,43 +12521,58 @@ msgid "Brim ear max angle" msgstr "Ângulo máximo da orelha da borda" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Ângulo máximo para permitir que uma orelha da borda apareça. \n" -"Se definido como 0, nenhuma borda será criado. \n" +"Ângulo máximo para permitir que uma orelha da borda apareça.\n" +"Se definido como 0, nenhuma borda será criado.\n" "Se definido como ~180, a borda será criada em tudo, exceto em seções retas." msgid "Brim ear detection radius" msgstr "Raio de detecção da orelha da borda" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "A geometria será decimada antes de detectar ângulos agudos. Este parâmetro " "indica o comprimento mínimo da divergência para a decimação.\n" -"0 para desativar" +"0 para desativar." -msgid "Compatible machine" -msgstr "Máquina compatível" +msgid "Select printers" +msgstr "Selecionar impressoras" msgid "upward compatible machine" msgstr "uáquina compatível ascendente" -msgid "Compatible machine condition" -msgstr "Condição de máquina compatível" +msgid "Condition" +msgstr "Condição" -msgid "Compatible process profiles" -msgstr "Perfis de processo compatíveis" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Uma expressão booleana usando os valores de configuração de um perfil de " +"impressora ativo. Se essa expressão for avaliada como true, esse perfil será " +"considerado compatível com o perfil de impressora ativo." -msgid "Compatible process profiles condition" -msgstr "Condição de perfis de processo compatíveis" +msgid "Select profiles" +msgstr "Selecionar perfis" -msgid "Print sequence, layer by layer or object by object" -msgstr "Sequência de impressão, camada por camada ou objeto por objeto" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Uma expressão booleana usando os valores de configuração de um perfil de " +"impressão ativo. Se essa expressão for avaliada como true, esse perfil será " +"considerado compatível com o perfil de impressão ativo." + +msgid "Print sequence, layer by layer or object by object." +msgstr "Sequência de impressão, camada por camada ou objeto por objeto." msgid "By layer" msgstr "Por camada" @@ -10231,8 +12583,8 @@ msgstr "Por objeto" msgid "Intra-layer order" msgstr "Ordem intra-camada" -msgid "Print order within a single layer" -msgstr "Ordem de impressão dentro de uma única camada" +msgid "Print order within a single layer." +msgstr "Ordem de impressão dentro de uma única camada." msgid "As object list" msgstr "Como lista de objetos" @@ -10244,38 +12596,35 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Ative esta opção para diminuir a velocidade de impressão para que o tempo da " -"camada final não seja menor do que o limite de tempo da camada em \"Limiar " +"camada final não seja menor do que o limiar de tempo da camada em \"Limiar " "de velocidade máxima do ventilador\", para que a camada possa ser resfriada " "por mais tempo. Isso pode melhorar a qualidade de resfriamento para detalhes " -"pequenos" +"pequenos." msgid "Normal printing" msgstr "Impressão normal" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "A aceleração padrão tanto para a impressão normal quanto para o movimento, " -"exceto na primeira camada" - -msgid "mm/s²" -msgstr "mm/s²" +"exceto na primeira camada." msgid "Default filament profile" msgstr "Perfil de filamento padrão" -msgid "Default filament profile when switch to this machine profile" -msgstr "Perfil de filamento padrão ao mudar para este perfil de máquina" +msgid "Default filament profile when switching to this machine profile." +msgstr "Perfil de filamento padrão ao trocar para este perfil de máquina." msgid "Default process profile" msgstr "Perfil de processo padrão" -msgid "Default process profile when switch to this machine profile" -msgstr "Perfil de processo padrão ao mudar para este perfil de máquina" +msgid "Default process profile when switching to this machine profile." +msgstr "Perfil de processo padrão ao trocar para este perfil de máquina." msgid "Activate air filtration" msgstr "Ativar filtragem de ar" @@ -10288,39 +12637,38 @@ msgid "Fan speed" msgstr "Velocidade do ventilador" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Velocidade do ventilador de exaustão durante a impressão. Esta velocidade " -"substituirá a velocidade no gcode personalizado do filamento" +"substituirá a velocidade no G-code personalizado do filamento." -msgid "Speed of exhaust fan after printing completes" -msgstr "Velocidade do ventilador de exaustão após a conclusão da impressão" +msgid "Speed of exhaust fan after printing completes." +msgstr "Velocidade do ventilador de exaustão após a conclusão da impressão." msgid "No cooling for the first" msgstr "Sem resfriamento para as primeiras" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"Feche todos os ventiladores de resfriamento para as primeiras camadas. O " -"ventilador de resfriamento da primeira camada costuma ser desligado para " -"obter uma melhor adesão à mesa" +"Desligar todos os ventiladores de resfriamento para as primeiras camadas. " +"Isso pode ser usado para obter uma melhor adesão à placa de impressão." msgid "Don't support bridges" msgstr "Não suportar pontes" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Não suportar toda a área da ponte que faz com que o suporte seja muito " -"grande. Ponte geralmente pode ser impressa diretamente sem suporte se não " -"for muito longa" +"grande. Pontes geralmente podem ser impressas diretamente sem suporte se não " +"forem muito longas." -msgid "Thick bridges" -msgstr "Ponte grossa" +msgid "Thick external bridges" +msgstr "Pontes externas grossas" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10332,7 +12680,7 @@ msgstr "" "confiáveis apenas para distâncias de ponte mais curtas." msgid "Thick internal bridges" -msgstr "Ponte interna grossa" +msgstr "Pontes internas grossas" msgid "" "If enabled, thick internal bridges will be used. It's usually recommended to " @@ -10341,70 +12689,137 @@ msgid "" msgstr "" "Se ativado, serão usadas pontes internas grossas. Geralmente é recomendado " "ter este recurso ativado. No entanto, considere desativá-lo se estiver " -"usando bocais grandes." +"usando bicos grandes." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Não filtrar pequenas pontes internas (beta)" +msgid "Extra bridge layers (beta)" +msgstr "Camadas extras de ponte (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Esta opção pode ajudar a reduzir o pillowing nas superfícies superiores em " -"modelos fortemente inclinados ou curvos.\n" +"Esta opção permite a geração de uma camada de ponte extra sobre pontes " +"internas e/ou externas.\n" "\n" -"Por padrão, pequenas pontes internas são filtradas e o preenchimento sólido " -"interno é impresso diretamente sobre o preenchimento não sólido. Isso " -"funciona bem na maioria dos casos, acelerando a impressão sem comprometer " -"muito a qualidade da superfície superior. \n" +"Camadas de ponte extras ajudam a melhorar a aparência e a confiabilidade da " +"ponte, pois o preenchimento sólido é melhor suportado. Isso é especialmente " +"útil em impressoras rápidas, onde as velocidades de preenchimento sólido e " +"de ponte variam muito. A camada de ponte extra resulta em redução de " +"almofadas nas superfícies superiores, bem como redução da separação da " +"camada de ponte externa de seus perímetros circundantes.\n" "\n" -"No entanto, em modelos fortemente inclinados ou curvos, especialmente quando " -"a densidade de preenchimento não sólido é muito baixa, isso pode resultar em " -"enrolamento do preenchimento sólido não suportado, causando pillowing.\n" +"É geralmente recomendado definir isso para pelo menos 'Somente ponte " +"externa', a menos que problemas específicos com o modelo fatiado sejam " +"encontrados.\n" "\n" -"Ativar esta opção imprimirá uma camada de ponte interna sobre o " -"preenchimento sólido interno ligeiramente não suportado. As opções abaixo " -"controlam a quantidade de filtragem, ou seja, a quantidade de pontes " -"internas criadas.\n" -"\n" -"Desativado - Desativa esta opção. Este é o comportamento padrão e funciona " -"bem na maioria dos casos.\n" -"\n" -"Filtragem limitada - Cria pontes internas em superfícies fortemente " -"inclinadas, evitando a criação de pontes internas desnecessárias. Isso " -"funciona bem para a maioria dos modelos difíceis.\n" -"\n" -"Sem filtragem - Cria pontes internas em cada inclinação interna potencial. " -"Esta opção é útil para modelos com superfície superior fortemente inclinada. " -"No entanto, na maioria dos casos, cria pontes desnecessárias demais." +"Opções:\n" +"1. Desativado - não gera segundas camadas de ponte. Este é o padrão e é " +"definido para fins de compatibilidade;\n" +"2. Apenas pontes externas - gera segundas camadas de ponte somente para " +"pontes voltadas para o exterior. Observe que pontes pequenas que sejam mais " +"curtas ou estreitas do que o número definido de perímetros serão ignoradas, " +"pois não se beneficiariam de uma segunda camada de ponte. Se gerada, a " +"segunda camada de ponte será extrudada paralelamente à primeira camada de " +"ponte para reforçar a resistência da ponte;\n" +"3. Apenas pontes internas - gera segundas camadas de ponte somente para " +"pontes internas sobre preenchimento esparso. Observe que as pontes internas " +"contam para a contagem da camada de casca superior do seu modelo. A segunda " +"camada de ponte interna será extrudada o mais perpendicular possível da à " +"primeira. Se várias regiões na mesma ilha, com ângulos de ponte variados, " +"estiverem presentes, a última região dessa ilha será selecionada como a " +"referência de ângulo;\n" +"4. Aplicar a todos - gera segundas camadas de ponte para pontes internas e " +"externas.\n" msgid "Disabled" msgstr "Desativado" +msgid "External bridge only" +msgstr "Apenas pontes externas" + +msgid "Internal bridge only" +msgstr "Apenas pontes internas" + +msgid "Apply to all" +msgstr "Aplicar a todos" + +msgid "Filter out small internal bridges" +msgstr "Filtrar pontes internas pequenas" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Esta opção pode ajudar a reduzir as almofadas em superfícies superiores em " +"modelos muito inclinados ou curvos.\n" +"Por padrão, pequenas pontes internas são filtradas e o preenchimento sólido " +"interno é impresso diretamente sobre o preenchimento esparso. Isso funciona " +"bem na maioria dos casos, acelerando a impressão sem comprometer muito a " +"qualidade da superfície superior.\n" +"No entanto, em modelos muito inclinados ou curvos, especialmente onde uma " +"densidade de preenchimento esparso muito baixa é usada, isso pode resultar " +"em ondulação do preenchimento sólido sem suporte, causando almofadas.\n" +"Habilitar a filtragem limitada ou nenhuma filtragem imprimirá a camada de " +"ponte interna sobre o preenchimento sólido interno com pouco suporte. As " +"opções abaixo controlam a sensibilidade da filtragem, ou seja, controlam " +"onde as pontes internas são criadas:\n" +"1. Filtrar - habilita esta opção. Este é o comportamento padrão e funciona " +"bem na maioria dos casos\n" +"2. Filtragem limitada - cria pontes em superfícies muito inclinadas, " +"evitando pontes desnecessárias. Isso funciona bem para a maioria dos modelos " +"difíceis\n" +"3. Sem filtragem - cria pontes internas em toda possível saliência interna. " +"Esta opção é útil para modelos de superfície superior muito inclinados; no " +"entanto, na maioria dos casos, cria muitas pontes desnecessárias" + msgid "Limited filtering" msgstr "Filtragem limitada" @@ -10412,38 +12827,38 @@ msgid "No filtering" msgstr "Sem filtragem" msgid "Max bridge length" -msgstr "Distância de ponte máxima" +msgstr "Comprimento máximo de ponte" msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"Comprimento máximo de pontes que não precisam de suporte. Defina-o como 0 se " -"desejar que todas as pontes tenham suporte, e defina-o como um valor muito " +"Comprimento máximo de pontes que não precisam de suporte. Defina como 0 se " +"desejar que todas as pontes tenham suporte, e defina como um valor muito " "grande se não desejar que nenhuma ponte tenha suporte." msgid "End G-code" msgstr "G-code de finalização" -msgid "End G-code when finish the whole printing" -msgstr "G-code de finalização ao terminar a impressão completa" +msgid "End G-code when finishing the entire print." +msgstr "G-code de finalização ao terminar a impressão completa." -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "G-code entre objetos" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Insira o G-code entre objetos. Este parâmetro só terá efeito quando você " -"imprimir seus modelos objeto por objeto" +"imprimir seus modelos objeto por objeto." -msgid "End G-code when finish the printing of this filament" -msgstr "G-code de finalização ao terminar a impressão deste filamento" +msgid "End G-code when finishing the printing of this filament." +msgstr "G-code de finalização ao terminar a impressão deste filamento." msgid "Ensure vertical shell thickness" -msgstr "Garantir a espessura vertical do perímetro" +msgstr "Garantir a espessura vertical da casca" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " @@ -10456,11 +12871,11 @@ msgid "" "Default value is All." msgstr "" "Adicione preenchimento sólido próximo a superfícies inclinadas para garantir " -"a espessura vertical (camadas de topo+base)\n" +"a espessura vertical da casca (camadas sólidas de topo+base)\n" "Nenhum: Nenhum preenchimento sólido será adicionado em nenhum lugar. " "Cuidado: Use esta opção com cuidado se o seu modelo tiver superfícies " "inclinadas\n" -"Apenas crítico: Evite adicionar preenchimento sólido para paredes\n" +"Apenas Crítico: Evita adicionar preenchimento sólido para paredes\n" "Moderado: Adicione preenchimento sólido apenas para superfícies fortemente " "inclinadas\n" "Todos: Adicione preenchimento sólido para todas as superfícies inclinadas " @@ -10476,14 +12891,8 @@ msgstr "Moderado" msgid "Top surface pattern" msgstr "Padrão de superfície superior" -msgid "Line pattern of top surface infill" -msgstr "Padrão de linha do preenchimento da superfície superior" - -msgid "Concentric" -msgstr "Concêntrico" - -msgid "Rectilinear" -msgstr "Retilíneo" +msgid "Line pattern of top surface infill." +msgstr "Padrão de linha do preenchimento da superfície superior." msgid "Monotonic" msgstr "Monótono" @@ -10491,9 +12900,15 @@ msgstr "Monótono" msgid "Monotonic line" msgstr "Linha monótona" +msgid "Rectilinear" +msgstr "Retilíneo" + msgid "Aligned Rectilinear" msgstr "Retilíneo alinhado" +msgid "Concentric" +msgstr "Concêntrico" + msgid "Hilbert Curve" msgstr "Curva de Hilbert" @@ -10506,10 +12921,10 @@ msgstr "Espiral de Octagrama" msgid "Bottom surface pattern" msgstr "Padrão de superfície inferior" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "" "Padrão de linha do preenchimento da superfície inferior, não do " -"preenchimento da ponte" +"preenchimento da ponte." msgid "Internal solid infill pattern" msgstr "Padrão de preenchimento sólido interno" @@ -10526,15 +12941,15 @@ msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Largura da linha do perímetro externo. Se expresso como porcentagem, será " +"Largura da linha da parede externa. Se expresso como porcentagem, será " "calculado sobre o diâmetro do bico." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"Velocidade do perímetro externo que é o mais externo e visível. Geralmente é " -"mais lenta que a velocidade do perímetro interno para obter melhor qualidade." +"Velocidade da parede externa que é a mais externo e visível. Geralmente é " +"mais lenta que a velocidade da parede interna para obter melhor qualidade." msgid "Small perimeters" msgstr "Pequenos perímetros" @@ -10547,26 +12962,26 @@ msgid "" msgstr "" "Essa configuração separada afetará a velocidade dos perímetros com raio <= " "small_perimeter_threshold (geralmente buracos). Se expresso como porcentagem " -"(por exemplo: 80%), será calculado com base na configuração de velocidade do " -"perímetro externo acima. Defina como zero para automático." +"(por exemplo: 80%), será calculado com base na configuração de velocidade da " +"parede externa acima. Defina como zero para automático." msgid "Small perimeters threshold" msgstr "Limiar de pequenos perímetros" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" -"Isso define o limite para o comprimento do perímetro pequeno. O limite " -"padrão é 0mm" +"Isso define o limiar para o comprimento do perímetro pequeno. O limiar " +"padrão é 0 mm." msgid "Walls printing order" -msgstr "Ordem de impressão dos perímetros" +msgstr "Ordem de impressão das paredes" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10576,40 +12991,36 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Sequência de impressão dos perímetros internos e externos. \n" +"Sequência de impressão das paredes internas e externas.\n" "\n" -"Use Interior/Exterior para melhores overhangs. Isso ocorre porque os " -"perímetros salientes podem aderir a um perímetro vizinho durante a " -"impressão. No entanto, esta opção resulta em uma qualidade superficial " -"ligeiramente reduzida, pois o perímetro externo é deformado ao ser esmagado " -"pelo perímetro interno.\n" +"Use Interior/Exterior para melhores saliências. Isso ocorre porque as " +"paredes salientes podem aderir a um perímetro vizinho durante a impressão. " +"No entanto, esta opção resulta em uma qualidade superficial ligeiramente " +"reduzida, pois o perímetro externo é deformado ao ser esmagado pelo " +"perímetro interno.\n" "\n" "Use Interior/Exterior/Interior para o melhor acabamento superficial externo " -"e precisão dimensional, pois o perímetro externo é impresso sem interrupções " -"a partir de um perímetro interno. No entanto, o desempenho da inclinaçãoserá " -"reduzido, pois não há perímetro interno para imprimir o perímetro externo. " -"Esta opção requer um mínimo de 3 perímetros para ser eficaz, pois imprime os " -"perímetros internos a partir do terceiro perímetro em diante primeiro, " -"depois o perímetro externo e, por fim, o primeiro perímetro interno. Esta " -"opção é recomendada em relação à opção Exterior/Interior na maioria dos " -"casos. \n" +"e precisão dimensional, pois a parede externa é impresso sem interrupções a " +"partir de um perímetro interno. No entanto, o desempenho da saliência será " +"reduzido, pois não há perímetro interno para suportar a impressão da parede " +"externa. Esta opção requer um mínimo de 3 paredes para ser eficaz, pois " +"imprime as paredes internas a partir do terceiro perímetro para fora " +"primeiro, depois o perímetro externo e finalmente o primeiro perímetro " +"interno. Esta opção é recomendada em vez da opção Exterior/Interior na " +"maioria dos casos.\n" "\n" "Use Exterior/Interior para obter os mesmos benefícios de qualidade de parede " "externa e precisão dimensional da opção Interior/Exterior/Interior. No " -"entanto, as costuras z aparecerão menos consistentes, pois a primeira " -"extrusão de uma nova camada começa em uma superfície visível.\n" -"\n" -" " +"entanto, as costuras Z aparecerão menos consistentes, pois a primeira " +"extrusão de uma nova camada começa em uma superfície visível." msgid "Inner/Outer" msgstr "Interior/Exterior" @@ -10628,49 +13039,49 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" -"Ordem de perímetro/preenchimento. Quando a caixa de seleção não desmarcada, " +"Ordem de parede/preenchimento. Quando a caixa de seleção estiver desmarcada, " "as paredes são impressas primeiro, o que funciona melhor na maioria dos " "casos.\n" "\n" -"Imprimir as paredes primeiro pode ajudar com overhangs extremos, pois as " +"Imprimir as paredes primeiro pode ajudar com saliências extremas, pois as " "paredes têm o preenchimento vizinho para aderir. No entanto, o preenchimento " "empurrará levemente as paredes impressas onde está conectado a elas, " "resultando em um acabamento de superfície externa pior. Também pode fazer " "com que o preenchimento apareça através das superfícies externas da peça." msgid "Wall loop direction" -msgstr "Direção da volta do perímetro" +msgstr "Direção da volta da parede" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"A direção na qual os loops da perímetro são extrudados quando vistos de " -"cima.\n" +"A direção em que as voltas de parede são extrudados quando se olha de cima " +"para baixo.\n" "\n" "Por padrão, todas as paredes são extrudadas no sentido anti-horário, a menos " -"que o Reverso em ímpar esteja ativado. Definir isso como qualquer opção que " -"não seja Automático forçará a direção do perímetro, independentemente do " -"Reverso em ímpar.\n" +"que Reverter em par esteja habilitado. Definir isso para qualquer opção " +"diferente de Auto forçará a direção da parede independentemente de Reverter " +"em par.\n" "\n" -"Esta opção será desativada se o modo de vaso espiral estiver ativado." +"Esta opção será desabilitada se o modo vaso espiral estiver habilitado." msgid "Counter clockwise" -msgstr "Sentido anti-horário" +msgstr "Anti-horário" msgid "Clockwise" -msgstr "Sentido horário" +msgstr "Horário" msgid "Height to rod" msgstr "Altura até a haste" @@ -10679,8 +13090,8 @@ msgid "" "Distance of the nozzle tip to the lower rod. Used for collision avoidance in " "by-object printing." msgstr "" -"Distância da ponta do bico ao tubo inferior. Usado para evitar colisões na " -"impressão por objeto." +"Distância da ponta do bico até a haste inferior. Usado para evitar colisões " +"na impressão por objeto." msgid "Height to lid" msgstr "Altura até a tampa" @@ -10696,7 +13107,7 @@ msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." msgstr "" -"Raio de folga ao redor do extrusor. Usado para evitar colisões na impressão " +"Raio de folga ao redor da extrusora. Usado para evitar colisões na impressão " "por objeto." msgid "Nozzle height" @@ -10706,7 +13117,7 @@ msgid "The height of nozzle tip." msgstr "Altura da ponta do bico." msgid "Bed mesh min" -msgstr "Mínimo do bed mesh" +msgstr "Mín da malha da mesa" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10718,18 +13129,18 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Esta opção define o ponto mínimo para a área permitida do bed mesh. Devido " -"ao deslocamento XY da sonda, a maioria das impressoras não consegue sondar " -"toda a mesa. Para garantir que o ponto da sonda não saia da área da mesa, os " -"pontos mínimo e máximo do bed mesh devem ser configurados adequadamente. O " -"Snapmaker Orca garante que os valores adaptive_bed_mesh_min/" +"Esta opção define o ponto mínimo para a área permitida da malha da mesa. " +"Devido ao deslocamento XY da sonda, a maioria das impressoras não consegue " +"sondar toda a mesa. Para garantir que o ponto da sonda não saia da área da " +"mesa, os pontos mínimo e máximo da malha da mesa devem ser configurados " +"adequadamente. O Snapmaker Orca garante que os valores adaptive_bed_mesh_min/" "adaptive_bed_mesh_max não excedam esses pontos mínimo/máximo. Essas " "informações geralmente podem ser obtidas com o fabricante da sua impressora. " "A configuração padrão é (-99999, -99999), o que significa que não há " "limites, permitindo a sondagem em toda a mesa." msgid "Bed mesh max" -msgstr "Máximo do bed mesh" +msgstr "Máx da malha da mesa" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10741,11 +13152,11 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Esta opção define o ponto máximo para a área permitida do bed mesh. Devido " -"ao deslocamento XY da sonda, a maioria das impressoras não consegue sondar " -"toda a mesa. Para garantir que o ponto da sonda não saia da área da mesa, os " -"pontos mínimo e máximo do bed mesh devem ser configurados adequadamente. O " -"Snapmaker Orca garante que os valores adaptive_bed_mesh_min/" +"Esta opção define o ponto máximo para a área permitida da malha da mesa. " +"Devido ao deslocamento XY da sonda, a maioria das impressoras não consegue " +"sondar toda a mesa. Para garantir que o ponto da sonda não saia da área da " +"mesa, os pontos mínimo e máximo da malha da mesa devem ser configurados " +"adequadamente. O Snapmaker Orca garante que os valores adaptive_bed_mesh_min/" "adaptive_bed_mesh_max não excedam esses pontos mínimo/máximo. Essas " "informações geralmente podem ser obtidas com o fabricante da sua impressora. " "A configuração padrão é (99999, 99999), o que significa que não há limites, " @@ -10769,47 +13180,208 @@ msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." msgstr "" -"Esta opção determina a distância adicional pela qual a área do bed mesh " -"adaptável deve ser expandida nas direções XY." +"Esta opção determina a distância adicional pela qual a área da malha da mesa " +"adaptativa deve ser expandida nas direções XY." + +msgid "Grab length" +msgstr "" msgid "Extruder Color" -msgstr "Cor do extrusor" +msgstr "Cor da Extrusora" -msgid "Only used as a visual help on UI" -msgstr "Usado apenas como ajuda visual na interface do usuário" +msgid "Only used as a visual help on UI." +msgstr "Usado apenas como ajuda visual na interface do usuário." msgid "Extruder offset" -msgstr "Offset da Extrusora" +msgstr "Deslocamento da extrusora" msgid "Flow ratio" -msgstr "Fluxo" +msgstr "Taxa de fluxo" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" -"O material pode ter mudança volumétrica após a troca entre o estado fundido " -"e o estado cristalino. Esta configuração altera todo o fluxo de extrusão " -"deste filamento no gcode proporcionalmente. A faixa de valores recomendada " +"O material pode ter mudança volumétrica após a troca entre os estados " +"fundido e cristalino. Esta configuração altera todo o fluxo de extrusão " +"deste filamento no G-code proporcionalmente. A faixa de valores recomendada " "está entre 0.95 e 1.05. Talvez você possa ajustar esse valor para obter uma " -"superfície plana agradável quando houver um leve transbordamento ou subfluxo" +"superfície plana agradável quando houver um leve transbordamento ou subfluxo." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"O material pode ter mudança volumétrica após a troca entre os estados " +"fundido e cristalino. Esta configuração altera todo o fluxo de extrusão " +"deste filamento no G-code proporcionalmente. A faixa de valores recomendada " +"está entre 0.95 e 1.05. Talvez você possa ajustar esse valor para obter uma " +"superfície plana agradável quando houver um leve transbordamento ou " +"subfluxo.\n" +"\n" +"A taxa de fluxo final do objeto é este valor multiplicado pela taxa de fluxo " +"do filamento." msgid "Enable pressure advance" -msgstr "Habilitar Pressure advance" +msgstr "Habilitar avanço de pressão" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Habilitar Pressure advance, o resultado da calibração automática será " +"Habilitar avanço de pressão, o resultado da calibração automática será " "sobrescrito uma vez habilitado." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Pressure advance(Klipper) também conhecido como Linear advance factor(Marlin)" +"Avanço de pressão (Klipper) também conhecido como Fator de avanço linear " +"(Marlin)" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Habilitar avanço de pressão adaptativo (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Com o aumento das velocidades de impressão (e, portanto, do fluxo " +"volumétrico através do bico) e acelerações crescentes, observou-se que o " +"valor efetivo de PA normalmente diminui. Isso significa que um único valor " +"de PA nem sempre é 100% ideal para todos os recursos e um valor de " +"compromisso é geralmente usado para não causar muita protuberância em partes " +"com menor velocidade de fluxo e acelerações, mas também não causar lacunas " +"em partes mais rápidas.\n" +"\n" +"Este recurso visa abordar essa limitação modelando a resposta do sistema de " +"extrusão da sua impressora dependendo da velocidade de fluxo volumétrico e " +"aceleração em que está imprimindo. Internamente, ele gera um modelo ajustado " +"que pode extrapolar o avanço de pressão necessário para qualquer velocidade " +"de fluxo volumétrico e aceleração, que é então emitido para a impressora " +"dependendo das condições de impressão atuais.\n" +"\n" +"Quando habilitado, o valor de avanço de pressão acima é substituído. No " +"entanto, um valor padrão razoável acima é fortemente recomendado para atuar " +"como um fallback e para quando a ferramenta for trocada.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Medidas de avanço de pressão adaptativo (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Adicione conjuntos de valores de avanço de pressão (PA), as velocidades de " +"fluxo volumétrico e acelerações em que foram medidos, separados por uma " +"vírgula. Um conjunto de valores por linha. Por exemplo\n" +"0,04,3,96,3000\n" +"0,033,3,96,10000\n" +"0,029,7,91,3000\n" +"0,026,7,91,10000\n" +"\n" +"Como calibrar:\n" +"1. Execute o teste de avanço de pressão para pelo menos 3 velocidades por " +"valor de aceleração. É recomendado que o teste seja executado para pelo " +"menos a velocidade dos perímetros externos, a velocidade dos perímetros " +"internos e a velocidade de impressão de recurso mais rápida em seu perfil " +"(geralmente é o preenchimento esparso ou sólido). Em seguida, execute-os " +"para as mesmas velocidades para as acelerações de impressão mais lentas e " +"mais rápidas, e não mais rápido do que a aceleração máxima recomendada, " +"conforme fornecido pelo modelador de entrada do Klipper\n" +"2. Anote o valor de PA ideal para cada velocidade e aceleração de fluxo " +"volumétrico. Você pode encontrar o número do fluxo selecionando fluxo no " +"menu suspenso do esquema de cores e movendo o controle deslizante horizontal " +"sobre as linhas do padrão de PA. O número deve estar visível na parte " +"inferior da página. O valor de PA ideal deve diminuir quanto maior for o " +"fluxo volumétrico. Se não estiver, confirme se sua extrusora está " +"funcionando corretamente. Quanto mais lento e com menos aceleração você " +"imprimir, maior será o intervalo de valores de PA aceitáveis. Se nenhuma " +"diferença for visível, use o valor de PA do teste mais rápido\n" +"3. Insira os tripletos de valores de PA, Fluxo e Acelerações na caixa de " +"texto aqui e salve seu perfil de filamento" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Habilitar avanço de pressão adaptável para saliências (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Habilite o PA adaptável para saliências, bem como quando o fluxo muda dentro " +"do mesmo recurso. Esta é uma opção experimental, pois se o perfil do PA não " +"for definido com precisão, ele causará problemas de uniformidade nas " +"superfícies externas antes e depois das saliências.\n" + +msgid "Pressure advance for bridges" +msgstr "Avanço de pressão para pontes" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Valor de avanço de pressão para pontes. Defina como 0 para desabilitar.\n" +"\n" +"Um valor de PA mais baixo ao imprimir pontes ajuda a reduzir a aparência de " +"leve subextrusão imediatamente após as pontes. Isso é causado pela queda de " +"pressão no bico ao imprimir no ar e um PA mais baixo ajuda a neutralizar " +"isso." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " @@ -10822,28 +13394,35 @@ msgid "Keep fan always on" msgstr "Manter o ventilador sempre ligado" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" -"Se habilitar esta configuração, o ventilador de resfriamento da peça nunca " -"será desligado e funcionará pelo menos na velocidade mínima para reduzir a " -"frequência de início e parada" +"Habilitar esta configuração significa que o ventilador de resfriamento da " +"peça nunca será desligado completamente e funcionará pelo menos na " +"velocidade mínima para reduzir a frequência de inícios e paradas." msgid "Don't slow down outer walls" -msgstr "" +msgstr "Não desacelerar as paredes externas" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"Se habilitada, esta configuração garantirá que os perímetros externos não " +"sejam desacelerados para atender ao tempo mínimo de camada. Isso é " +"particularmente útil nos cenários abaixo:\n" +"1. Para evitar alterações no brilho ao imprimir filamentos brilhantes\n" +"2. Para evitar alterações na velocidade da parede externa que podem criar " +"leves artefatos de parede que parecem bandas Z\n" +"3. Para evitar a impressão em velocidades que causam VFAs (artefatos finos) " +"nas paredes externas" msgid "Layer time" msgstr "Tempo da camada" @@ -10851,18 +13430,22 @@ msgstr "Tempo da camada" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" -"O ventilador de resfriamento da peça será ativado para camadas cujo tempo " +"O ventilador de resfriamento de peças será ativado para camadas cujo tempo " "estimado seja menor que esse valor. A velocidade do ventilador é interpolada " "entre as velocidades mínima e máxima do ventilador de acordo com o tempo de " -"impressão da camada" +"impressão da camada." msgid "Default color" msgstr "Cor padrão" -msgid "Default filament color" -msgstr "Cor padrão do filamento" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Cor padrão do filamento.\n" +"Clique com o botão direito para redefinir o valor para o padrão do sistema." msgid "Filament notes" msgstr "Observações do filamento" @@ -10880,47 +13463,115 @@ msgstr "" "HRC mínimo do bico necessário para imprimir o filamento. Zero significa que " "não há verificação do HRC do bico." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Essa configuração representa quanto volume de filamento pode ser derretido e " "extrudado por segundo. A velocidade de impressão é limitada pela fluxo " "volumétrico máximo, no caso de configurações de velocidade muito altas e " -"irrazoáveis. Não pode ser zero" - -msgid "mm³/s" -msgstr "mm³/s" +"irrazoáveis. Não pode ser zero." msgid "Filament load time" msgstr "Tempo de carga do filamento" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tempo para carregar novo filamento ao trocar de filamento. Apenas para " -"estatísticas" +"Tempo para carregar novo filamento ao trocar o filamento. Geralmente é " +"aplicável para máquinas multimateriais de extrusora única. Para trocadores " +"de ferramentas ou máquinas multiferramentas, é tipicamente 0. Apenas para " +"estatística." msgid "Filament unload time" msgstr "Tempo de descarga do filamento" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Tempo para descarregar o filamento antigo ao trocar de filamento. Apenas " -"para estatísticas" +"Tempo para descarregar o filamento antigo ao trocar o filamento. Geralmente " +"é aplicável para máquinas multimateriais de extrusora única. Para trocadores " +"de ferramentas ou máquinas multiferramentas, é tipicamente 0. Apenas para " +"estatística." + +msgid "Tool change time" +msgstr "Tempo de troca de ferramenta" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." msgstr "" -"O diâmetro do filamento é usado para calcular a extrusão no gcode, portanto, " -"é importante e deve ser preciso" +"Tempo gasto para trocar ferramentas. Geralmente é aplicável para trocadores " +"de ferramentas ou máquinas multiferramentas. Para máquinas multimateriais de " +"extrusora única, é tipicamente 0. Apenas para estatística." + +msgid "Bed temperature type" +msgstr "Tipo de temperatura de mesa" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" +"Esta opção determina como a temperatura da mesa de impressão é definida " +"durante o fatiamento: com base na temperatura do primeiro filamento ou na " +"maior temperatura dos filamentos impressos." + +msgid "By First filament" +msgstr "Por Primeiro Filamento" + +msgid "By Highest Temp" +msgstr "Por Maior Temperatura" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"O diâmetro do filamento é usado para calcular a extrusão no G-code, " +"portanto, é importante e deve ser preciso." msgid "Pellet flow coefficient" -msgstr "" +msgstr "Coeficiente de fluxo de pellets" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10928,30 +13579,68 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"O coeficiente de fluxo de pellets é derivado empiricamente e permite o " +"cálculo de volume para impressoras de pellets.\n" +"\n" +"Internamente, ele é convertido para filament_diameter. Todos os outros " +"cálculos de volume permanecem os mesmos.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" -msgstr "Retração" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Encolhimento (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" "Informe a porcentagem de retração que o filamento terá após o resfriamento " -"(94% se você medir 94mm em vez de 100mm). A peça será escalada em xy para " +"(94% se você medir 94mm em vez de 100mm). A peça será escalada em XY para " "compensar. Apenas o filamento usado para o perímetro é levado em " "consideração.\n" "Certifique-se de permitir espaço suficiente entre objetos, pois essa " "compensação é feita após as verificações." +msgid "Shrinkage (Z)" +msgstr "Encolhimento (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Informe a porcentagem de retração que o filamento terá após o resfriamento " +"(94% se você medir 94mm em vez de 100mm). A peça será escalada em Z para " +"compensar." + +msgid "Adhesiveness Category" +msgstr "Categoria de Adesão" + +msgid "Filament category." +msgstr "Categoria de filamento." + msgid "Loading speed" msgstr "Velocidade de carregamento" msgid "Speed used for loading the filament on the wipe tower." -msgstr "Velocidade usada para carregar o filamento na Torre Prime" +msgstr "Velocidade usada para carregar o filamento na torre de limpeza." msgid "Loading speed at the start" msgstr "Velocidade de carregamento no início" @@ -10963,11 +13652,11 @@ msgid "Unloading speed" msgstr "Velocidade de descarregamento" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"Velocidade usada para descarregar o filamento na Torre Prime (não afeta a " -"parte inicial do descarregamento logo após o moldeamento)." +"Velocidade usada para descarregar o filamento na torre de limpeza (não afeta " +"a parte inicial do descarregamento logo após o moldeamento)." msgid "Unloading speed at the start" msgstr "Velocidade de descarregamento no início" @@ -10982,8 +13671,8 @@ msgid "Delay after unloading" msgstr "Atraso após o descarregamento" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Tempo de espera após o filamento ser descarregado. Pode ajudar a obter " @@ -11000,6 +13689,26 @@ msgstr "" "O filamento é resfriado movendo-se para frente e para trás nos tubos de " "resfriamento. Especifique o número desejado desses movimentos." +msgid "Stamping loading speed" +msgstr "Velocidade de carregamento de estampagem" + +msgid "Speed used for stamping." +msgstr "Velocidade usada para estampagem." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" +"Distância de estampagem medida a partir do centro do tubo de resfriamento" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Se definido como valor diferente de zero, o filamento é movido em direção ao " +"bico entre os movimentos de resfriamento individuais (\"estampagem\"). Esta " +"opção configura quanto tempo esse movimento deve durar antes que o filamento " +"seja retraído novamente." + msgid "Speed of the first cooling move" msgstr "Velocidade do primeiro movimento de resfriamento" @@ -11009,7 +13718,7 @@ msgstr "" "velocidade." msgid "Minimal purge on wipe tower" -msgstr "Purga mínima na Torre Prime" +msgstr "Purga mínima na torre de limpeza" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -11018,12 +13727,13 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Após uma troca de filamento, a posição exata do filamento recém-carregado " +"Após uma troca de ferramenta, a posição exata do filamento recém-carregado " "dentro do bico pode não ser conhecida, e a pressão do filamento " "provavelmente ainda não está estável. Antes de purgar a cabeça de impressão " "em um preenchimento ou em um objeto de sacrifício, o Snapmaker Orca sempre " -"preparará essa quantidade de material na Torre Prime para produzir extrusões " -"sucessivas de preenchimento ou de objeto de sacrifício de forma confiável." +"preparará essa quantidade de material na torre de limpeza para produzir " +"extrusões sucessivas de preenchimento ou de objeto de sacrifício de forma " +"confiável." msgid "Speed of the last cooling move" msgstr "Velocidade do último movimento de resfriamento" @@ -11033,16 +13743,6 @@ msgstr "" "Os movimentos de resfriamento estão gradualmente acelerando em direção a " "esta velocidade." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tempo para o firmware da impressora (ou a Unidade de Material Multi 2.0) " -"carregar um novo filamento durante uma troca de ferramenta (ao executar o " -"código T). Este tempo é adicionado ao tempo total de impressão pelo " -"estimador de tempo do G-code." - msgid "Ramming parameters" msgstr "Parâmetros de moldeamento" @@ -11053,80 +13753,84 @@ msgstr "" "Esta frase é editada pelo RammingDialog e contém parâmetros específicos de " "moldeamento." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Tempo para o firmware da impressora (ou a Unidade de Material Multi 2.0) " -"descarregar um filamento durante uma troca de ferramenta (ao executar o " -"código T). Este tempo é adicionado ao tempo total de impressão pelo " -"estimador de tempo do G-code." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "Habilitar moldeamento para configurações de multi-extrusora" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -"Realizar moldeamentoao usando impressora multi-extrusora(ou seja, quando a " -"opção 'Único Extrusor Multimaterial' em Configurações de Impressora está " +"Realizar moldeamento usando impressora multi-ferramenta (ou seja, quando a " +"opção 'Multimaterial de Extrusora Única' em Configurações de Impressora está " "desmarcada). Quando ativo, uma pequena quantidade de filamento é rapidamente " -"extrudado na Torre Prime logo antes da troca de extrusora. Esta opção é " -"usada apenas quando a Torre Prime está habilitada." +"extrudado na torre de limpeza logo antes da troca de ferramenta. Esta opção " +"é usada apenas quando a torre de limpeza está habilitada." -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "Volume de moldeamento multi-extrusora" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "O volume a ser esmagado antes da troca de ferramenta." -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "Fluxo de esmagamento multi-extrusora" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "Fluxo usado para moldar o filamento antes da troca de extrusora." msgid "Density" msgstr "Densidade" -msgid "Filament density. For statistics only" -msgstr "Densidade do filamento. Apenas para estatísticas" +msgid "Filament density. For statistics only." +msgstr "Densidade do filamento. Apenas para estatística." -msgid "g/cm³" -msgstr "g/cm3" - -msgid "The material type of filament" -msgstr "O tipo de material do filamento" +msgid "The material type of filament." +msgstr "O tipo de material do filamento." msgid "Soluble material" msgstr "Material solúvel" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" -"O material solúvel é comumente usado para imprimir suporte e interface de " -"suporte" +"O material solúvel é comumente usado para imprimir suportes e interfaces de " +"suporte." + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" +"Ao trocar a extrusora, recomenda-se extrudar um certo comprimento de " +"filamento da extrusora original. Isso ajuda a minimizar o vazamento pelo " +"bico." msgid "Support material" msgstr "Material de suporte" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" -"O material de suporte é comumente usado para imprimir suporte e interface de " -"suporte" +"O material de suporte é comumente usado para imprimir suportes e interfaces " +"de suporte." + +msgid "Filament printable" +msgstr "Filamento imprimível" + +msgid "The filament is printable in extruder." +msgstr "O filamento é imprimível na extrusora." msgid "Softening temperature" msgstr "Temperatura de amolecimento" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "O material amolece a esta temperatura, portanto, quando a temperatura da " "mesa for igual ou maior que ela, é altamente recomendável abrir a porta da " @@ -11135,8 +13839,8 @@ msgstr "" msgid "Price" msgstr "Preço" -msgid "Filament price. For statistics only" -msgstr "Preço do filamento. Apenas para estatísticas" +msgid "Filament price. For statistics only." +msgstr "Preço do filamento. Apenas para estatística." msgid "money/kg" msgstr "dinheiro/kg" @@ -11144,79 +13848,113 @@ msgstr "dinheiro/kg" msgid "Vendor" msgstr "Fornecedor" -msgid "Vendor of filament. For show only" -msgstr "Fornecedor do filamento. Apenas para mostrar" +msgid "Vendor of filament. For show only." +msgstr "Fornecedor do filamento. Apenas para mostrar." msgid "(Undefined)" msgstr "(Indefinido)" msgid "Sparse infill direction" -msgstr "Direção do preenchimento" +msgstr "Direção do preenchimento esparso" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Ângulo para o padrão de preenchimento não sólido, que controla o início ou a " -"direção principal da linha" +"Ângulo para o padrão de preenchimento esparso, que controla a direção " +"inicial ou principal da linha." msgid "Solid infill direction" msgstr "Direção do preenchimento sólido" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Ângulo para padrão de preenchimento sólido, que controla a direção inicial " -"ou principal da linha" - -msgid "Rotate solid infill direction" -msgstr "Rotaciona a direção do preenchimento sólido" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Rotaciona a direção do preenchimento em 90° para cada camada." +"ou principal da linha." msgid "Sparse infill density" -msgstr "Densidade do preenchimento" +msgstr "Densidade do preenchimento esparso" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" -"Densidade do preenchimento não sólido interno, 100% transforma todo o " -"preenchimento não sólido em preenchimento sólido e será usado o padrão de " -"preenchimento sólido interno" +"Densidade do preenchimento esparso interno, 100% transforma todo o " +"preenchimento esparso em preenchimento sólido e será usado o padrão de " +"preenchimento sólido interno." + +msgid "Align infill direction to model" +msgstr "Alinhar direção do preenchimento ao modelo" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Alinha as direções de preenchimento e de preenchimento da superfície para " +"seguir a orientação do modelo na placa de impressão. Quando ativado, as " +"direções de preenchimento giram com o modelo para manter as características " +"de resistência ideais." + +msgid "Insert solid layers" +msgstr "Inserir camadas sólidas" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Insere preenchimento sólido em camadas específicas. Use N para inserir a " +"cada enésima camada, N#K para inserir K camadas sólidas consecutivas a cada " +"enésima camada (K é opcional, ou seja, '5#' é igual a '5#1'), ou uma lista " +"separada por vírgulas (Ex. 1,7,9) para inserir em camadas esplícitas. " +"Camadas são baseadas em 1." + +msgid "Fill Multiline" +msgstr "Multilinhas de Preenchimento" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" +"Usar múltiplas linhas para o padrão de preenchimento, se suportado pelo " +"padrão de preenchimento." msgid "Sparse infill pattern" -msgstr "Padrão de preenchimento" +msgstr "Padrão de preenchimento esparso" -msgid "Line pattern for internal sparse infill" -msgstr "Padrão de linha para preenchimento interno" +msgid "Line pattern for internal sparse infill." +msgstr "Padrão de linha para preenchimento esparso interno." -msgid "Grid" -msgstr "Grade" +msgid "Zig Zag" +msgstr "Zigue-Zague" + +msgid "Cross Zag" +msgstr "Zague Cruzado" + +msgid "Locked Zag" +msgstr "Zague Travado" msgid "Line" msgstr "Linha" -msgid "Cubic" -msgstr "Cúbico" +msgid "Grid" +msgstr "Grade" msgid "Tri-hexagon" msgstr "Tri-hexágono" -msgid "Gyroid" -msgstr "Giroide" - -msgid "Honeycomb" -msgstr "Honeycomb" +msgid "Cubic" +msgstr "Cúbico" msgid "Adaptive Cubic" msgstr "Cúbico Adaptativo" -msgid "3D Honeycomb" -msgstr "Honeycomb 3D" +msgid "Quarter Cubic" +msgstr "Quarto Cúbico" msgid "Support Cubic" msgstr "Cúbico de Suporte" @@ -11224,11 +13962,60 @@ msgstr "Cúbico de Suporte" msgid "Lightning" msgstr "Relâmpago" +msgid "Honeycomb" +msgstr "Favo de Mel" + +msgid "3D Honeycomb" +msgstr "Favo de Mel 3D" + +msgid "Lateral Honeycomb" +msgstr "Favo de Mel Lateral" + +msgid "Lateral Lattice" +msgstr "Treliça Lateral" + msgid "Cross Hatch" -msgstr "Padrão Cruzado" +msgstr "Hachura Cruzada" + +msgid "TPMS-D" +msgstr "TPMS-D" + +msgid "TPMS-FK" +msgstr "TPMS-FK" + +msgid "Gyroid" +msgstr "Giroide" + +msgid "Lateral lattice angle 1" +msgstr "Ângulo 1 de treliça lateral" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"O ângulo do primeiro conjunto de elementos de treliça lateral na direção Z. " +"Zero é vertical." + +msgid "Lateral lattice angle 2" +msgstr "Ângulo 2 de treliça lateral" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"O ângulo do segundo conjunto de elementos de treliça lateral na direção Z. " +"Zero é vertical." + +msgid "Infill overhang angle" +msgstr "Ângulo de saliência do preenchimento" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" +"O ângulo das linhas de preenchimento. 60° resultará em um favo de mel puro." msgid "Sparse infill anchor length" -msgstr "Comp. da âncora de preenchimento" +msgstr "Comprimento da âncora de preenchimento esparso" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11238,19 +14025,18 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" "Conecte uma linha de preenchimento a um perímetro interno com um segmento " "curto de um perímetro adicional. Se expresso como porcentagem (exemplo: " -"15%), é calculado sobre a largura de extrusão do preenchimento. O Orca " -"Slicer tenta conectar duas linhas de preenchimento próximas a um segmento " -"curto de perímetro. Se nenhum segmento de perímetro mais curto que " -"infill_anchor_max for encontrado, a linha de preenchimento é conectada a um " -"segmento de perímetro em apenas um lado e o comprimento do segmento de " -"perímetro tomado é limitado a este parâmetro, mas não mais do que " -"anchor_length_max. \n" +"15%), é calculado sobre a largura de extrusão do preenchimento. O Snapmaker Orca " +"tenta conectar duas linhas de preenchimento próximas a um segmento curto de " +"perímetro. Se nenhum segmento de perímetro mais curto que infill_anchor_max " +"for encontrado, a linha de preenchimento é conectada a um segmento de " +"perímetro em apenas um lado e o comprimento do segmento de perímetro tomado " +"é limitado a este parâmetro, mas não mais do que anchor_length_max.\n" "Defina este parâmetro como zero para desabilitar os perímetros de ancoragem " "conectados a uma única linha de preenchimento." @@ -11261,7 +14047,7 @@ msgid "1000 (unlimited)" msgstr "1000 (ilimitado)" msgid "Maximum length of the infill anchor" -msgstr "Comp. máx. da âncora de preench." +msgstr "Comprimento máximo da âncora de preenchimento" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11271,51 +14057,50 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" "Conecte uma linha de preenchimento a um perímetro interno com um segmento " "curto de um perímetro adicional. Se expresso como porcentagem (exemplo: " -"15%), é calculado sobre a largura de extrusão do preenchimento. O Orca " -"Slicer tenta conectar duas linhas de preenchimento próximas a um segmento " -"curto de perímetro. Se nenhum segmento de perímetro mais curto que este " -"parâmetro for encontrado, a linha de preenchimento é conectada a um segmento " -"de perímetro em apenas um lado e o comprimento do segmento de perímetro " -"tomado é limitado a infill_anchor, mas não mais do que este parâmetro. \n" +"15%), é calculado sobre a largura de extrusão do preenchimento. O Snapmaker Orca " +"tenta conectar duas linhas de preenchimento próximas a um segmento curto de " +"perímetro. Se nenhum segmento de perímetro mais curto que este parâmetro for " +"encontrado, a linha de preenchimento é conectada a um segmento de perímetro " +"em apenas um lado e o comprimento do segmento de perímetro tomado é limitado " +"a infill_anchor, mas não mais do que este parâmetro.\n" "Se definido como 0, o antigo algoritmo de conexão de preenchimento será " "usado, ele deve criar o mesmo resultado que com 1000 e 0." msgid "0 (Simple connect)" msgstr "0 (Conexão simples)" -msgid "Acceleration of outer walls" -msgstr "Aceleração das paredes externas" +msgid "Acceleration of outer walls." +msgstr "Aceleração das paredes externas." -msgid "Acceleration of inner walls" -msgstr "Aceleração das paredes internas" +msgid "Acceleration of inner walls." +msgstr "Aceleração das paredes internas." -msgid "Acceleration of travel moves" -msgstr "Aceleração dos movimentos de deslocamento" +msgid "Acceleration of travel moves." +msgstr "Aceleração dos movimentos de deslocamento." msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Aceleração do preenchimento da superfície superior. Usar um valor menor pode " -"melhorar a qualidade da superfície superior" +"melhorar a qualidade da superfície superior." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" -"Aceleração do perímetro externo. Usar um valor menor pode melhorar a " -"qualidade" +"Aceleração da parede externa. Usar um valor menor pode melhorar a qualidade." msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." msgstr "" "Aceleração das pontes. Se o valor for expresso como uma porcentagem (por " -"exemplo, 50%), será calculado com base na aceleração do perímetro externo." +"exemplo, 50%), será calculado com base na aceleração da parede externa." msgid "mm/s² or %" msgstr "mm/s² ou %" @@ -11324,7 +14109,7 @@ msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." "g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Aceleração do preenchimento não sólido. Se o valor for expresso como uma " +"Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), será calculado com base na aceleração " "padrão." @@ -11339,43 +14124,56 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Aceleração da primeira camada. Usar um valor menor pode melhorar a adesão à " -"mesa" +"placa de impressão." msgid "Enable accel_to_decel" msgstr "Habilitar accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "O max_accel_to_decel do Klipper será ajustado automaticamente" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "O max_accel_to_decel do Klipper será ajustado automaticamente." msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -"O max_accel_to_decel do Klipper será ajustado para esse %% de aceleração" +"O max_accel_to_decel do Klipper será ajustado para esse %% de aceleração." -msgid "Jerk of outer walls" -msgstr "Jerk nas paredes externas" +msgid "Default jerk." +msgstr "Jerk padrão." -msgid "Jerk of inner walls" -msgstr "Jerk nas paredes internas" +msgid "Junction Deviation" +msgstr "Desvio de Junção" -msgid "Jerk for top surface" -msgstr "Jerk na superfície superior" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" +"Desvio de Junção do Firmware Marlin (substitui a configuração de Jerk XY " +"tradicional)." -msgid "Jerk for infill" -msgstr "Jerk no preenchimento" +msgid "Jerk of outer walls." +msgstr "Jerk nas paredes externas." -msgid "Jerk for initial layer" -msgstr "Jerk na primeira camada" +msgid "Jerk of inner walls." +msgstr "Jerk nas paredes internas." -msgid "Jerk for travel" -msgstr "Jerk no deslocamento" +msgid "Jerk for top surface." +msgstr "Jerk para superfície superior." + +msgid "Jerk for infill." +msgstr "Jerk para preenchimento." + +msgid "Jerk for initial layer." +msgstr "Jerk para primeira camada." + +msgid "Jerk for travel." +msgstr "Jerk para deslocamento." msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " @@ -11389,25 +14187,25 @@ msgstr "Altura da primeira camada" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Altura da primeira camada. Tornar a altura da primeira camada ligeiramente " -"espessa pode melhorar a adesão à mesa" +"espessa pode melhorar a adesão à placa de impressão." -msgid "Speed of initial layer except the solid infill part" -msgstr "Velocidade da primeira camada, exceto a parte de preenchimento sólido" +msgid "Speed of initial layer except the solid infill part." +msgstr "Velocidade da primeira camada, exceto a parte de preenchimento sólido." msgid "Initial layer infill" msgstr "Preenchimento da primeira camada" -msgid "Speed of solid infill part of initial layer" -msgstr "Velocidade da parte de preenchimento sólido da primeira camada" +msgid "Speed of solid infill part of initial layer." +msgstr "Velocidade da parte de preenchimento sólido da primeira camada." msgid "Initial layer travel speed" msgstr "Velocidade de deslocamento da primeira camada" -msgid "Travel speed of initial layer" -msgstr "Velocidade de deslocamento da primeira camada" +msgid "Travel speed of initial layer." +msgstr "Velocidade de deslocamento da primeira camada." msgid "Number of slow layers" msgstr "Número de camadas lentas" @@ -11423,9 +14221,9 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Temperatura do bico da primeira camada" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" -"Temperatura do bico para imprimir a primeira camada ao usar este filamento" +"Temperatura do bico para imprimir a primeira camada ao usar este filamento." msgid "Full fan speed at layer" msgstr "Velocidade total do ventilador na camada" @@ -11445,30 +14243,67 @@ msgstr "" "\"close_fan_the_first_x_layers\" + 1." msgid "layer" -msgstr "" +msgstr "camada" msgid "Support interface fan speed" -msgstr "Velocidade do ventilador de interface de suporte" +msgstr "Velocidade do ventilador para interface de suporte" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." msgstr "" -"Esta velocidade do ventilador é aplicada durante todas as interfaces de " -"suporte, para enfraquecer sua ligação com uma alta velocidade do " -"ventilador.\n" -"Defina como -1 para desativar esta substituição.\n" -"Só pode ser substituído por disable_fan_first_layers." +"Esta velocidade do ventilador de resfriamento de peças é aplicada ao " +"imprimir interfaces de suporte. Definir este parâmetro para uma velocidade " +"maior que a normal reduz a força de adesão de camada entre os suportes e a " +"peça suportada, tornando-os mais fáceis de separar.\n" +"Defina como -1 para desabilitá-lo.\n" +"Esta configuração é substituída por disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Velocidade do ventilador para pontes internas" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"A velocidade do ventilador de resfriamento de peças usada para todas as " +"pontes internas. Defina como -1 para usar as configurações de velocidade do " +"ventilador de sobreposição.\n" +"\n" +"Reduzir a velocidade do ventilador das pontes internas, em comparação com a " +"velocidade normal do ventilador, pode ajudar a reduzir a deformação das " +"peças devido ao resfriamento excessivo aplicado sobre uma grande superfície " +"por um período prolongado de tempo." + +msgid "Ironing fan speed" +msgstr "Velocidade do ventilador para passar a ferro" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Esta velocidade do ventilador de resfriamento de peças é aplicada ao passar " +"a ferro. Definir este parâmetro para uma velocidade menor que a normal reduz " +"a possibilidade de entupimento do bico devido ao baixo fluxo volumétrico, " +"tornando a interface mais suave.\n" +"Defina como -1 para desabilitá-lo." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"Movimento aleatório durante a impressão do perímetro, de modo que a " -"superfície tenha uma aparência áspera. Essa configuração controla a textura " -"fuzzy" +"Movimento aleatório durante a impressão da parede, de modo que a superfície " +"tenha uma aparência áspera. Essa configuração controla a posição difusa." msgid "Contour" msgstr "Contorno" @@ -11480,30 +14315,153 @@ msgid "All walls" msgstr "Todas as paredes" msgid "Fuzzy skin thickness" -msgstr "Espessura da textura fuzzy" +msgstr "Espessura da textura difusa" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"A largura dentro da qual tremer. É desaconselhável que seja menor do que a " -"largura da linha do perímetro externo" +"A largura dentro da qual tremer. É aconselhável que seja menor do que a " +"largura da linha da parede externa." msgid "Fuzzy skin point distance" -msgstr "Distância do ponto da textura fuzzy" +msgstr "Distância do ponto da textura difusa" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "A distância média entre os pontos aleatórios introduzidos em cada segmento " -"de linha" +"de linha." msgid "Apply fuzzy skin to first layer" -msgstr "Aplicar texture fuzzy à primeira camada" +msgstr "Aplicar textura difusa à primeira camada" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Se deve aplicar textura fuzzy na primeira camada" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Se deve aplicar textura difusa na primeira camada." + +msgid "Fuzzy skin generator mode" +msgstr "Modo gerador de textura difusa" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Modo gerador de textura difusa. Funciona apenas com Arachne!\n" +"Deslocamento: Modo clássico quando o padrão é formado pelo deslocamento do " +"bico lateralmente em relação ao caminho original.\n" +"Extrusão: O modo quando o padrão é formado pela quantidade de plástico " +"extrudado. Este é o algoritmo rápido e direto, sem trepidação desnecessária " +"do bico, que produz um padrão suave. Mas é mais útil para formar paredes " +"soltas em toda a matriz.\n" +"Combinado: Modo de junção [Deslocamento] + [Extrusão]. A aparência das " +"paredes é semelhante ao Modo [Deslocamento], mas não deixa poros entre os " +"perímetros.\n" +"\n" +"Atenção! Os modos [Extrusão] e [Combinado] trabalham apenas com o parâmetro " +"fuzzy_skin_thickness, não mais do que a espessura do loop impresso. Ao mesmo " +"tempo, a largura da extrusão para uma camada específica também não deve ser " +"inferior a um determinado nível. Geralmente, é igual a 15-25%% da altura da " +"camada. Portanto, a espessura máxima da camada fuzzy com uma largura de " +"perímetro de 0,4 mm e uma altura de camada de 0,2 mm será 0,4-(0,2*0,25)=" +"±0,35 mm! Se você inserir um parâmetro maior que esse, o erro Flow::" +"spacing() será exibido e o modelo não será fatiado. Você pode escolher este " +"número até que o erro se repita." + +msgid "Displacement" +msgstr "Deslocamento" + +msgid "Extrusion" +msgstr "Extrusão" + +msgid "Combined" +msgstr "Combinado" + +msgid "Fuzzy skin noise type" +msgstr "Tipo de ruído da textura difusa" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Tipo de ruído a ser usado para geração de textura difusa:\n" +"Clássico: Ruído aleatório uniforme clássico;\n" +"Perlin: Ruído Perlin, que dá uma textura mais consistente;\n" +"Billow: Semelhante ao ruído Perlin, mas mais aglomerado;\n" +"Multifractal estriado: Ruído estriado com características pontiagudas e " +"irregulares. Cria texturas semelhantes a mármore;\n" +"Voronoi: Divide a superfície em células Voronoi e desloca cada uma delas por " +"uma quantidade aleatória. Cria uma textura de retalhos." + +msgid "Classic" +msgstr "Clássico" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Multifractal estriado" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Tamanho dos elementos da textura difusa" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"O tamanho base dos elementos de ruído coerente, em mm. Valores mais altos " +"resultarão em elementos maiores." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Oitavas de ruído de textura difusa" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"O número de oitavas de ruído coerente a ser usado. Valores mais altos " +"aumentam o detalhe do ruído, mas também aumentam o tempo de computação." + +msgid "Fuzzy skin noise persistence" +msgstr "Persistência de ruído de textura difusa" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"A taxa de decaimento para oitavas mais altas do ruído coerente. Valores mais " +"baixos resultarão em ruído mais suave." msgid "Filter out tiny gaps" msgstr "Filtrar vazios pequenos" @@ -11511,21 +14469,28 @@ msgstr "Filtrar vazios pequenos" msgid "Layers and Perimeters" msgstr "Camadas e Perímetros" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Filtrar vazios menores que o limite especificado" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Não imprimir preenchimento de lacuna com um comprimento menor que o limiar " +"especificado (em mm). Esta configuração se aplica ao preenchimento superior, " +"inferior e sólido e, se estiver usando o gerador de perímetro clássico, ao " +"preenchimento de lacuna de parede." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Velocidade de preenchimento de vão. Vazios geralmente têm largura de linha " -"irregular e devem ser impressas mais lentamente" +"irregular e devem ser impressas mais lentamente." msgid "Precise Z height" msgstr "Altura Z precisa" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11538,16 +14503,16 @@ msgstr "Ajuste de arco (Arc fitting)" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" -"Habilite isso para obter um arquivo de código G, que tenha movimentos G2 e " -"G3. A tolerância adequada é a mesma que a resolução. \n" +"Habilite isso para obter um arquivo de G-code, que tenha movimentos G2 e G3. " +"A tolerância adequada é a mesma que a resolução.\n" "\n" "Nota: Para máquinas klipper, esta opção é recomendada estar desativada. " "Klipper não beneficia de comandos de arco pois eles são divididos novamente " @@ -11559,30 +14524,31 @@ msgstr "" msgid "Add line number" msgstr "Adicionar número da linha" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" -"Habilitar isso para adicionar o número da linha (Nx) no início de cada linha " -"do G-Code" +"Habilite isso para adicionar o número da linha (Nx) no início de cada linha " +"do G-code." msgid "Scan first layer" msgstr "Escanear primeira camada" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Habilitar isso para ativar a câmera na impressora para verificar a qualidade " -"da primeira camada" +"da primeira camada." msgid "Nozzle type" msgstr "Tipo de bico" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "O material metálico do bico. Isso determina a resistência ao desgaste do " -"bico e que tipo de filamento pode ser impresso" +"bico e que tipo de filamento pode ser impresso." msgid "Undefine" msgstr "Não definido" @@ -11593,6 +14559,9 @@ msgstr "Aço endurecido" msgid "Stainless steel" msgstr "Aço inoxidável" +msgid "Tungsten carbide" +msgstr "Carbeto de tungstênio" + msgid "Brass" msgstr "Latão" @@ -11604,16 +14573,16 @@ msgid "" "slicing." msgstr "" "A dureza do bico. Zero significa que não há verificação da dureza do bico " -"durante a fatiamento." +"durante o fatiamento." msgid "HRC" -msgstr "RH" +msgstr "HRC" msgid "Printer structure" msgstr "Estrutura da impressora" -msgid "The physical arrangement and components of a printing device" -msgstr "A disposição física e componentes de um dispositivo de impressão" +msgid "The physical arrangement and components of a printing device." +msgstr "A disposição física e componentes de um dispositivo de impressão." msgid "CoreXY" msgstr "CoreXY" @@ -11640,34 +14609,34 @@ msgid "" "command: M106 P2 S(0-255)." msgstr "" "Habilitar esta opção se a máquina tiver ventilador auxiliar de resfriamento " -"da peça. Comando G-code: M106 P2 S(0-255)." +"de peças. Comando G-code: M106 P2 S(0-255)." msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"Comece o ventilador este número de segundos antes do tempo de início do alvo " -"(você pode usar segundos fracionários). Ele assume aceleração infinita para " -"esta estimativa de tempo e só levará em conta os movimentos G1 e G0 (o " -"ajuste de arco não é suportado).\n" -"Não moverá comandos do ventilador de gcodes personalizados (eles funcionam " +"Ativar o ventilador este número de segundos antes do seu tempo de início " +"alvo (você pode usar frações de segundos). Ele assume aceleração infinita " +"para esta estimativa de tempo e levará em conta apenas os movimentos G1 e G0 " +"(o ajuste de arco não é suportado).\n" +"Não moverá G-code de comandos do ventilador personalizados (eles funcionam " "como uma espécie de 'barreira').\n" -"Não moverá comandos do ventilador para o início do gcode se o 'apenas gcode " -"de início personalizado' estiver ativado.\n" +"Não moverá comandos do ventilador para o início do G-code se 'apenas G-code " +"de início personalizado' estiver ativo.\n" "Use 0 para desativar." msgid "Only overhangs" -msgstr "Apenas overhangs" +msgstr "Apenas saliências" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "Levará em conta apenas o atraso para o resfriamento dos s." +msgstr "Levará em conta apenas o atraso para o resfriamento das saliências." msgid "Fan kick-start time" msgstr "Tempo de inicialização do ventilador" @@ -11690,8 +14659,8 @@ msgstr "" msgid "Time cost" msgstr "Custo de tempo" -msgid "The printer cost per hour" -msgstr "O custo da impressora por hora" +msgid "The printer cost per hour." +msgstr "O custo da impressora por hora." msgid "money/h" msgstr "dinheiro/h" @@ -11721,44 +14690,45 @@ msgstr "" msgid "G-code flavor" msgstr "Tipo de G-code" -msgid "What kind of gcode the printer is compatible with" -msgstr "Com que tipo de G-code a impressora é compatível" +msgid "What kind of G-code the printer is compatible with." +msgstr "Com que tipo de G-code a impressora é compatível." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "Impressora Modificada para Pellets" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" +"Habilite esta opção se sua impressora usa pellets em vez de filamentos." msgid "Support multi bed types" -msgstr "Suportar vários tipos de mesa" +msgstr "Suportar vários tipos de placa" -msgid "Enable this option if you want to use multiple bed types" -msgstr "Ative esta opção se quiser usar vários tipos de mesa" +msgid "Enable this option if you want to use multiple bed types." +msgstr "Ative esta opção se quiser usar vários tipos de placa." msgid "Label objects" msgstr "Etiquetar objetos" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Ative isso para adicionar comentários no G-Code etiquetando movimentos de " +"Ative isso para adicionar comentários no G-code etiquetando movimentos de " "impressão com a qual objeto eles pertencem, o que é útil para o plugin " "CancelObject do Octoprint. Esta configuração NÃO é compatível com a " -"configuração de Material Múltiplo de Extrusora Única e Limpeza no Objeto / " +"configuração de Multimaterial de Extrusora Única e Limpeza no Objeto / " "Limpeza no Preenchimento." msgid "Exclude objects" msgstr "Excluir objetos" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "Ative esta opção para adicionar o comando EXCLUDE OBJECT no g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Ative esta opção para adicionar o comando EXCLUIR OBJETO no G-code." msgid "Verbose G-code" msgstr "G-code detalhado" @@ -11779,22 +14749,191 @@ msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"Combina automaticamente o preenchimento não sólido de várias camadas para " -"imprimir juntas e reduzir o tempo. O perímetro ainda é impresso com a altura " +"Combina automaticamente o preenchimento esparso de várias camadas para " +"imprimir juntas e reduzir o tempo. A parede ainda é impressa com a altura " "original da camada." +msgid "Infill shift step" +msgstr "Passo de deslocamento de preenchimento" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Este parâmetro adiciona um leve deslocamento a cada camada de preenchimento " +"para criar uma textura cruzada." + +msgid "Sparse infill rotation template" +msgstr "Gabarito de rotação de preenchimento esparso" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Gira a direção do preenchimento esparso por camada usando um gabarito de " +"ângulos. Insira graus separados por vírgula (por exemplo, '0, 30, 60, 90'). " +"Os ângulos são aplicados em ordem por camada e repetidos quando a lista " +"termina. Sintaxe avançada suportada: '+5' gira +5° a cada camada; '+5#5' " +"gira +5° a cada 5 camadas. Consulte a Wiki para obter detalhes. Quando um " +"modelo é definido, a configuração padrão de direção do preenchimento é " +"ignorada. Observação: alguns padrões de preenchimento (por exemplo, Giróide) " +"tem seu próprio controle de rotação, use com cuidado." + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Gabarito de rotação de preenchimento sólido" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Este parâmetro adiciona uma rotação da direção do preenchimento sólido a " +"cada camada, de acordo com o gabarito especificado. O gabarito é uma lista " +"de ângulos em graus separados por vírgulas, por exemplo, '0,90'. O primeiro " +"ângulo é aplicado à primeira camada, o segundo ângulo à segunda camada e " +"assim por diante. Se houver mais camadas do que ângulos, os ângulos serão " +"repetidos. Observe que nem todos os padrões de preenchimento sólido suportam " +"rotação." + +msgid "Skeleton infill density" +msgstr "Densidade de preenchimento de esqueleto" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"A parte restante do contorno do modelo após a remoção de uma certa " +"profundidade da superfície é chamada de esqueleto. Este parâmetro é usado " +"para ajustar a densidade desta seção. Quando duas regiões têm as mesmas " +"configurações de preenchimento esparso, mas densidades de esqueleto " +"diferentes, suas áreas de esqueleto desenvolverão seções sobrepostas. O " +"padrão é o mesmo que a densidade de preenchimento." + +msgid "Skin infill density" +msgstr "Densidade de preenchimento de textura" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"A porção da superfície externa do modelo dentro de uma determinada faixa de " +"profundidade é chamada de textura. Este parâmetro é usado para ajustar a " +"densidade dessa seção. Quando duas regiões têm as mesmas configurações de " +"preenchimento esparso, mas densidades de textura diferentes, esta área não " +"será dividida em duas regiões separadas. O padrão é o mesmo que a densidade " +"de preenchimento." + +msgid "Skin infill depth" +msgstr "Profundidade de preenchimento de textura" + +msgid "The parameter sets the depth of skin." +msgstr "O parâmetro define a profundidade da textura." + +msgid "Infill lock depth" +msgstr "Profundade de travamento do preenchimento" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" +"O parâmetro define a profundidade de sobreposição entre o interior e a " +"textura." + +msgid "Skin line width" +msgstr "Largura da linha da textura" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Ajuste da largura da linha dos caminhos de textura selecionados." + +msgid "Skeleton line width" +msgstr "Largura da linha do esqueleto" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Ajuste da largura da linha dos caminhos de esqueleto selecionados." + +msgid "Symmetric infill Y axis" +msgstr "Preenchimento simétrico no eixo Y" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Se o modelo tiver duas partes simétricas em relação ao eixo Y e você quiser " +"que essas partes tenham texturas simétricas, clique nesta opção em uma das " +"partes." + +msgid "Infill combination - Max layer height" +msgstr "Combinação de preenchimento - Altura máx da camada" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Altura máxima da camada para o preenchimento esparso combinado.\n" +"\n" +"Defina como 0 ou 100% para usar o diâmetro do bico (para redução máxima no " +"tempo de impressão) ou um valor de ~80% para maximizar a resistência do " +"preenchimento esparso.\n" +"\n" +"O número de camadas sobre as quais o preenchimento é combinado é derivado da " +"divisão deste valor pela altura da camada e arredondado para o decimal mais " +"próximo.\n" +"\n" +"Use valores absolutos em mm (por exemplo, 0,32 mm para um bico de 0,4 mm) ou " +"valores em % (por exemplo, 80%). Este valor não deve ser maior que o " +"diâmetro do bico." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." -msgstr "Filamento para imprimir preenchimento interno não sólido." +msgstr "Filamento para imprimir preenchimento esparso interno." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -"Largura da linha do preenchimento interno não sólido. Se expresso como %, " -"será calculado sobre o diâmetro do bico." +"Largura da linha do preenchimento esparso interno. Se expresso como %, será " +"calculado sobre o diâmetro do bico." msgid "Infill/Wall overlap" -msgstr "Sobreposição de preenchimento/perímetro" +msgstr "Sobreposição de preenchimento/parede" #, no-c-format, no-boost-format msgid "" @@ -11805,9 +14944,9 @@ msgid "" msgstr "" "A área de preenchimento é aumentada ligeiramente para se sobrepor à parede " "para uma melhor ligação. O valor percentual é relativo à largura da linha do " -"preencimento. Defina este valor como ~10-15% para minimizar uma potencial " -"sobre extrusão e acumulo de material resultando em superfícies superiores " -"ásperas." +"preencimento esparso. Defina este valor como ~10-15% para minimizar uma " +"potencial sobre extrusão e acumulo de material resultando em superfícies " +"superiores ásperas." msgid "Top/Bottom solid infill/wall overlap" msgstr "Sobreposição Superior/Inferior de preenchimento sólido/parede" @@ -11816,30 +14955,36 @@ msgstr "Sobreposição Superior/Inferior de preenchimento sólido/parede" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "A área de preenchimento sólido é ligeiramente alargada para se sobrepor à " -"parede para melhor ligação e para minimizar a aparência de buracos onde o " +"parede para melhor adesão e para minimizar a aparência de furos onde o " "preenchimento encontra as paredes. Um valor de 25-30% é um bom ponto de " "partida, minimizando a aparência dos buracos. O valor percentual é relativo " -"à largura da linha do preenchimento" +"à largura da linha do preenchimento esparso." -msgid "Speed of internal sparse infill" -msgstr "Velocidade do preenchimento" +msgid "Speed of internal sparse infill." +msgstr "Velocidade do preenchimento esparso interno." + +msgid "Inherits profile" +msgstr "Herda o perfil" + +msgid "Name of parent profile." +msgstr "Nome do perfil pai." msgid "Interface shells" -msgstr "Paredes de interface" +msgstr "Cascas de interface" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Força a geração de perímetros sólidos entre materiais/volumes adjacentes. " -"Útil para impressões com múltiplos extrusores com materiais translúcidos ou " -"suporte solúvel manual" +"Força a geração de cascas sólidas entre materiais/volumes adjacentes. Útil " +"para impressões com multiextrusoras com materiais translúcidos ou suporte " +"solúvel manual." msgid "Maximum width of a segmented region" msgstr "Largura máxima de uma região segmentada" @@ -11849,60 +14994,75 @@ msgstr "" "Largura máxima de uma região segmentada. Zero desativa essa funcionalidade." msgid "Interlocking depth of a segmented region" -msgstr "Profundidade de entrelaçamento de uma região segmentada" +msgstr "Profundidade de intertravamento de uma região segmentada" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Profundidade de entrelaçamento de uma região segmentada. Zero desativa essa " -"funcionalidade." +"Profundidade de intertravamento de uma região segmentada. Será ignorado se " +"\"mmu_segmented_region_max_width\" for zero ou se " +"\"mmu_segmented_region_interlocking_depth\" for maior que " +"\"mmu_segmented_region_max_width\". Zero desabilita esse recurso." msgid "Use beam interlocking" -msgstr "" +msgstr "Usar intertravamento de viga" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Gerar estrutura de intertravamento de viga nos locais onde diferentes " +"filamentos se tocam. Isso melhora a adesão entre filamentos, especialmente " +"em modelos impressos em materiais diferentes." msgid "Interlocking beam width" -msgstr "" +msgstr "Largura do intertravamento de viga" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "Largura do intertravamento de viga." msgid "Interlocking direction" -msgstr "" +msgstr "Direção do intertravamento" msgid "Orientation of interlock beams." -msgstr "" +msgstr "Orientação do intertravamento de viga." msgid "Interlocking beam layers" -msgstr "" +msgstr "Camadas do intertravamento de viga" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"A altura das vigas da estrutura de intertravamento, medida em número de " +"camadas. Menos camadas são mais fortes, mas mais propensas a defeitos." msgid "Interlocking depth" -msgstr "" +msgstr "Profundidade do intertravamento" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"A distância da fronteira entre os filamentos para gerar a estrutura de " +"intertravamento, medida em células. Poucas células resultarão em adesão ruim." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Prevenção de fronteiras intertravadas" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"A distância da parte externa de um modelo onde estruturas intertravadas não " +"serão geradas, medida em células." msgid "Ironing Type" -msgstr "Tipo do passar ferro" +msgstr "Tipo do passar a ferro" msgid "" "Ironing is using small flow to print on same height of surface again to make " @@ -11913,7 +15073,7 @@ msgstr "" "qual camada está sendo passada a ferro" msgid "No ironing" -msgstr "Desativado" +msgstr "Não passar a ferro" msgid "Top surfaces" msgstr "Superfícies superiores" @@ -11925,57 +15085,71 @@ msgid "All solid layer" msgstr "Todas as camadas sólidas" msgid "Ironing Pattern" -msgstr "Padrão do passar ferro" +msgstr "Padrão do passar a ferro" -msgid "The pattern that will be used when ironing" -msgstr "O padrão que será usado ao passar a ferro" +msgid "The pattern that will be used when ironing." +msgstr "O padrão que será usado ao passar a ferro." msgid "Ironing flow" -msgstr "Fluxo do passar ferro" +msgstr "Fluxo do passar a ferro" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "A quantidade de material a extrudar durante o passar a ferro. Relativo ao " "fluxo da altura normal da camada. Um valor muito alto resulta em " -"superextrusão na superfície" +"superextrusão na superfície." msgid "Ironing line spacing" -msgstr "Espaçamento de linha do passar ferro" +msgstr "Espaçamento de linha do passar a ferro" -msgid "The distance between the lines of ironing" -msgstr "A distância entre as linhas do passar ferro" +msgid "The distance between the lines of ironing." +msgstr "A distância entre as linhas do passar a ferro." -msgid "Ironing speed" -msgstr "Velocidade do passar ferro" - -msgid "Print speed of ironing lines" -msgstr "Velocidade de impressão das linhas do passar ferro" - -msgid "Ironing angle" -msgstr "Ângulo do passar ferro" +msgid "Ironing inset" +msgstr "Inserção do passar a ferro" msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." msgstr "" -"O ângulo em que o passar a ferro é feito. Um número negativo desativa essa " -"função e usa o método padrão." +"A distância a ser mantida das bordas. Um valor de 0 define isso como metade " +"do diâmetro do bico." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Ironing speed" +msgstr "Velocidade do passar a ferro" + +msgid "Print speed of ironing lines." +msgstr "Velocidade de impressão das linhas do passar a ferro." + +msgid "Ironing angle offset" +msgstr "" + +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "Este G-code é inserido a cada mudança de camada após a elevação Z." + +msgid "Clumping detection G-code" msgstr "" -"Esta parte do gcode é inserida em cada mudança de camada após levantar z" msgid "Supports silent mode" msgstr "Suporta modo silencioso" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Se a máquina suporta o modo silencioso, no qual a máquina usa uma aceleração " -"mais baixa para imprimir" +"mais baixa para imprimir." msgid "Emit limits to G-code" msgstr "Emitir limites para o G-code" @@ -11985,26 +15159,26 @@ msgstr "Limites da máquina" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Se ativado, os limites da máquina serão emitidos para o arquivo de G-code.\n" "Esta opção será ignorada se o tipo do G-code estiver definido para Klipper." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Este G-code será usado como um código para pausar a impressão. O usuário " -"pode inserir o G-code de pausa no visualizador de G-code" +"pode inserir o G-code de pausa no visualizador de G-code." -msgid "This G-code will be used as a custom code" -msgstr "Este G-code será usado como um código personalizado" +msgid "This G-code will be used as a custom code." +msgstr "Este G-code será usado como um código personalizado." msgid "Small area flow compensation (beta)" msgstr "Compensação de fluxo de área pequena (beta)" -msgid "Enable flow compensation for small infill areas" -msgstr "Habilitar compensação de fluxo para áreas de preenchimento pequenas" +msgid "Enable flow compensation for small infill areas." +msgstr "Habilitar compensação de fluxo para áreas de preenchimento pequenas." msgid "Flow Compensation Model" msgstr "Modelo de Compensação de Fluxo" @@ -12012,13 +15186,14 @@ msgstr "Modelo de Compensação de Fluxo" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" "Modelo de Compensação de Fluxo, usado para ajustar o fluxo para áreas de " "preenchimento pequenas. O modelo é expresso como um par de valores separados " -"por vírgula para o comprimento de extrusão e os fatores de correção de " -"fluxo, um por linha, no seguinte formato: \"1.234,5.678\"" +"por vírgula para o comprimento de extrusão e o fator de correção de fluxo. " +"Cada par em uma linha separeada, seguido por ponto-e-vírgula, no seguinte " +"formato: \"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "Velocidade máxima X" @@ -12092,6 +15267,19 @@ msgstr "Jerk máximo do eixo Z" msgid "Maximum jerk of the E axis" msgstr "Jerk máximo do eixo E" +msgid "Maximum Junction Deviation" +msgstr "Desvio de Junção Máximo" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" +"Desvio de junção máximo (M205 J, aplicável apenas se JD > 0 para Firmware " +"Marlin\n" +"Se a sua impressora Marlin 2 usa o recurso Classic Jerk, defina esse valor " +"como 0.)" + msgid "Minimum speed for extruding" msgstr "Velocidade mínima para extrusão" @@ -12119,27 +15307,48 @@ msgstr "Aceleração máxima para retrair (M204 R)" msgid "Maximum acceleration for travel" msgstr "Aceleração máxima para deslocamento" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" -"Aceleração máxima para deslocamento (M204 T), aplica-se apenas ao Marlin 2" +"Aceleração máxima para deslocamento (M204 T), aplica-se apenas ao Marlin 2." + +msgid "Resonance avoidance" +msgstr "Prevenção de ressonância" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." msgstr "" -"A velocidade do ventilador de resfriamento da peça pode ser aumentada quando " -"o resfriamento automático está habilitado. Este é o limite máximo de " -"velocidade do ventilador de resfriamento da peça" +"Ao reduzir a velocidade da parede externa para evitar a zona de ressonância " +"da impressora, evita-se o efeito de anéis na superfície do modelo.\n" +"Desative esta opção ao testar o efeito de anéis." + +msgid "Min" +msgstr "Mín" + +msgid "Minimum speed of resonance avoidance." +msgstr "Velocidade mínima de prevenção de ressonância." msgid "Max" msgstr "Máx" +msgid "Maximum speed of resonance avoidance." +msgstr "Velocidade máxima de prevenção de ressonância." + msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." msgstr "" -"A maior altura de camada imprimível para o extrusor. Usado para limitar a " -"altura máxima da camada quando a altura da camada adaptativa está ativada" +"A velocidade do ventilador de resfriamento de peças pode ser aumentada " +"quando o resfriamento automático está habilitado. Este é o limite máximo de " +"velocidade do ventilador de resfriamento de peças." + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." +msgstr "" +"A maior altura de camada imprimível para a extrusora. Usada para limitar a " +"altura máxima da camada quando a altura da camada adaptativa está ativada." msgid "Extrusion rate smoothing" msgstr "Suavização da extrusão" @@ -12150,23 +15359,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12177,7 +15386,7 @@ msgstr "" "velocidade/maior largura) para uma extrusão de baixo fluxo (baixa velocidade/" "menor largura) e vice-versa.\n" "\n" -"Define a taxa máxima pela qual o fluxo volumétrico extrudado em mm3/seg pode " +"Define a taxa máxima pela qual o fluxo volumétrico extrudado em mm³/s pode " "mudar ao longo do tempo. Valores mais altos significam que mudanças de taxa " "de extrusão mais altas são permitidas, resultando em transições de " "velocidade mais rápidas.\n" @@ -12188,47 +15397,59 @@ msgstr "" "(como a Bambu lab ou Voron), esse valor geralmente não é necessário. No " "entanto, pode fornecer alguns benefícios marginais em certos casos em que as " "velocidades das características variam muito. Por exemplo, quando há " -"desacelerações agressivas devido a overhangs. Nesses casos, um valor alto de " -"cerca de 300-350mm3/s2 é recomendado, pois isso permite apenas suavização " -"suficiente para ajudar o Pressure advance a alcançar uma transição de fluxo " -"mais suave.\n" +"desacelerações agressivas devido a saliências. Nesses casos, um valor alto " +"de cerca de 300-350 mm³/s² é recomendado, pois isso permite apenas " +"suavização suficiente para ajudar o avanço de pressão a alcançar uma " +"transição de fluxo mais suave.\n" "\n" -"Para impressoras mais lentas sem Pressure advance, o valor deve ser definido " -"muito mais baixo. Um valor de 10-15mm3/s2 é um bom ponto de partida para " -"extrusoras de acionamento direto e 5-10mm3/s2 para estilo Bowden.\n" +"Para impressoras mais lentas sem avanço de pressão, o valor deve ser " +"definido muito mais baixo. Um valor de 10-15 mm³/s² é um bom ponto de " +"partida para extrusoras de acionamento direto e 5-10 mm³/s² para estilo " +"Bowden.\n" "\n" -"Este recurso é conhecido como Equalizador de Pressão no slicer Prusa.\n" +"Este recurso é conhecido como Equalizador de Pressão no PrusaSlicer.\n" "\n" "Nota: este parâmetro desativa o ajuste de arco." -msgid "mm³/s²" -msgstr "mm3/s2" - msgid "Smoothing segment length" -msgstr "Distancia do segmento de suavização" +msgstr "Comprimento do segmento de suavização" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Um valor menor resulta em transições de extrusão mais suaves. No entanto, " -"isso resulta em um arquivo Gcode significativamente maior e mais instruções " -"para a impressora processar.\n" +"Um valor menor resulta em transições de faixa extrusão mais suaves. No " +"entanto, isso resulta em um arquivo G-code significativamente maior e mais " +"instruções para a impressora processar.\n" "\n" "O valor padrão de 3 funciona bem para a maioria dos casos. Se sua impressora " "estiver engasgando, aumente este valor para reduzir o número de ajustes " "feitos.\n" "\n" -"Valores permitidos: 1-5" +"Valores permitidos: 0.5-5" -msgid "Minimum speed for part cooling fan" -msgstr "Velocidade mínima para o ventilador de resfriamento da peça" +msgid "Apply only on external features" +msgstr "Aplicar somente em recursos externos" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Aplica suavização de taxa de extrusão somente em perímetros externos e " +"saliências. Isso pode ajudar a reduzir artefatos devido a transições de " +"velocidade bruscas em saliências visíveis externamente sem impactar a " +"velocidade de impressão de recursos que não serão visíveis ao usuário." + +msgid "Minimum speed for part cooling fan." +msgstr "Velocidade mínima para o ventilador de resfriamento de peças." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " @@ -12244,33 +15465,27 @@ msgstr "" "Por favor, habilite o ventilador auxiliar nas configurações da impressora " "para usar esta função. Comando G-code: M106 P2 S(0-255)" -msgid "Min" -msgstr "Mín" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"A menor altura de camada imprimível para o extrusor. Usado para limitar a " -"altura mínima da camada ao habilitar a altura de camada adaptativa" +"A menor altura de camada imprimível para a extrusora. Usada para limitar a " +"altura mínima da camada ao habilitar a altura de camada adaptativa." msgid "Min print speed" msgstr "Velocidade de impressão mínima" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"A velocidade de impressão mínima para a qual a impressora diminuirá a " -"velocidade para tentar manter o tempo mínimo de camada acima, quando a " -"desaceleração para um melhor resfriamento da camada estiver habilitada." +"A velocidade mínima de impressão para a qual a impressora diminui a " +"velocidade para manter o tempo mínimo de camada definido acima quando a " +"desaceleração para melhor resfriamento da camada está ativada." -msgid "Nozzle diameter" -msgstr "Diâmetro do bico" - -msgid "Diameter of nozzle" -msgstr "Diâmetro do bico" +msgid "The diameter of nozzle." +msgstr "O diâmetro do bico." msgid "Configuration notes" msgstr "Notas de configuração" @@ -12289,21 +15504,21 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." msgstr "" -"O Snapmaker Orca pode carregar arquivos de código G para um hospedeiro de " +"O Snapmaker Orca pode carregar arquivos de G-code para um hospedeiro de " "impressora. Este campo deve conter o tipo de hospedeiro." msgid "Nozzle volume" msgstr "Volume do bico" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Volume do bico entre o cortador e a extremidade do bico" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Volume do bico entre o cortador e a extremidade do bico." msgid "Cooling tube position" msgstr "Posição do tubo de resfriamento" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" -"Distância do ponto central do tubo de resfriamento da ponta do extrusor." +"Distância do ponto central do tubo de resfriamento da ponta da extrusora." msgid "Cooling tube length" msgstr "Comprimento do tubo de resfriamento" @@ -12333,7 +15548,7 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Distância da ponta do extrusor da posição onde o filamento é estacionado " +"Distância da ponta da extrusora da posição onde o filamento é estacionado " "quando descarregado. Isso deve corresponder ao valor no firmware da " "impressora." @@ -12343,7 +15558,7 @@ msgstr "Distância de carregamento extra" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Quando definido como zero, a distância que o filamento é movido da posição " @@ -12364,94 +15579,101 @@ msgstr "Reduzir retração durante o preenchimento" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Não retrair quando o movimento está na área de preenchimento completamente. " "Isso significa que o vazamento não pode ser visto. Isso pode reduzir o " "número de retratações para modelos complexos e economizar tempo de " -"impressão, mas torna a geração de fatiamento e G-code mais lenta" +"impressão, mas torna a geração de fatiamento e G-code mais lenta." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Esta opção diminuirá a temperatura das extrusoras inativas para evitar " +"vazamentos." msgid "Filename format" msgstr "Formato do nome do arquivo" -msgid "User can self-define the project file name when export" -msgstr "O usuário pode auto-definir o nome do arquivo do projeto ao exportar" +msgid "Users can define the project file name when exporting." +msgstr "O usuário pode definir o nome do arquivo do projeto ao exportar." msgid "Make overhangs printable" -msgstr "Overhangs imprimíveis" +msgstr "Tornar saliências imprimíveis" msgid "Modify the geometry to print overhangs without support material." -msgstr "Modifica a geometria para imprimir overhangs sem suporte." +msgstr "Modifica a geometria para imprimir saliências sem suporte." msgid "Make overhangs printable - Maximum angle" -msgstr "Overhangs imprimíveis - ângulo máx" +msgstr "Tornar saliências imprimíveis - Ângulo máximo" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"Ângulo máximo do overhang permitido antes de fazer ângulos mais íngremes " +"Ângulo máximo da saliência permitido antes de fazer ângulos mais íngremes " "imprimíveis. 90° não vai fazer nenhuma mudança no modelo e vai permitir " -"qualquer overhang. 0 vai substituir todos overhangs por uma forma cônica." +"qualquer overhang. 0 vai substituir todas as saliências por uma forma cônica." msgid "Make overhangs printable - Hole area" -msgstr "Overhangs imprimíveis - área do furo" +msgstr "Tornar saliências imprimíveis - Área do furo" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Área maxima de um furo na base do modelo antes que ele seja preenchido por " "uma forma cônica. Um valor 0 irá preencher todos os furos do modelo." -msgid "mm²" -msgstr "mm2" - msgid "Detect overhang wall" -msgstr "Detectar overhangs" +msgstr "Detectar paredes salientes" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Detecta a porcentagem relativa de overhang em relação a largura do perímetro " -"e usa uma velocidade diferente de impressão. Para overhangs 100%%, a " -"velocidade de ponte é usada." +"Detecta a porcentagem relativa de saliência em relação a largura do " +"perímetro e usa uma velocidade diferente de impressão. Para saliências " +"100%%, a velocidade de ponte é usada." + +msgid "Filament to print walls." +msgstr "Filamento para imprimir paredes." msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Largura do perímetro interno. Se expressado como %, será computado de acordo " -"com o diâmetro do bico." +"Largura de linha da parede interna. Se expressado como %, será computado de " +"acordo com o diâmetro do bico." -msgid "Speed of inner wall" -msgstr "Velocidade do perímetro interno" +msgid "Speed of inner wall." +msgstr "Velocidade da parede interna." -msgid "Number of walls of every layer" -msgstr "Número de perímetros em cada camada" +msgid "Number of walls of every layer." +msgstr "Número de paredes em cada camada." msgid "Alternate extra wall" msgstr "Parede extra alternada" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" -"Esta configuração adiciona um perímetro extra a cada duas camadas. Dessa " +"Esta configuração adiciona uma parede extra a cada duas camadas. Dessa " "forma, o preenchimento fica encaixado verticalmente entre as paredes, " -"resultando em impressões mais resistentes. \n" +"resultando em impressões mais resistentes.\n" "\n" -"Quando esta opção está ativada, a opção de garantir a espessura vertical do " -"perímetro precisa ser desativada. \n" +"Quando esta opção está ativada, a opção de garantir a espessura vertical da " +"casca precisa ser desativada.\n" "\n" "Não é recomendado usar o preenchimento rápido juntamente com esta opção, " "pois há preenchimento limitado para ancorar os perímetros extras." @@ -12469,150 +15691,169 @@ msgstr "" "o arquivo G-code como primeiro argumento, e eles podem acessar as " "configurações do Snapmaker Orca lendo variáveis de ambiente." +msgid "Printer type" +msgstr "Tipo de impressora" + +msgid "Type of the printer." +msgstr "Tipo da impressora." + msgid "Printer notes" msgstr "Notas da impressora" msgid "You can put your notes regarding the printer here." msgstr "Você pode inserir suas observações sobre a impressora aqui." -msgid "Raft contact Z distance" -msgstr "Distância (Z) de contato da Jangada" +msgid "Printer variant" +msgstr "Variante da impressora" -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "Lacuna (Z) entre o objeto e a Jangada. Ignorado para interface solúvel" +msgid "Raft contact Z distance" +msgstr "Distância Z de contato da jangada" + +msgid "Z gap between object and raft. Ignored for soluble interface." +msgstr "Vão Z entre o objeto e a jangada. Ignorado para interface solúvel." msgid "Raft expansion" -msgstr "Expansão da Jangada" +msgstr "Expansão da jangada" -msgid "Expand all raft layers in XY plane" -msgstr "Expandir todas as camadas da Jangada no plano XY" +msgid "Expand all raft layers in XY plane." +msgstr "Expandir todas as camadas da jangada no plano XY." msgid "Initial layer density" msgstr "Densidade da primeira camada" -msgid "Density of the first raft or support layer" -msgstr "Densidade da primeira camada da Jangada ou Suporte" +msgid "Density of the first raft or support layer." +msgstr "Densidade da primeira camada da jangada ou do suporte." msgid "Initial layer expansion" msgstr "Expansão da primeira camada" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" -"Expanda a primeira camada da Jangada ou Suporte para melhorar a adesão à " -"mesa de impressão" +"Expanda a primeira camada da jangada ou do suporte para melhorar a adesão à " +"placa da mesa de impressão." msgid "Raft layers" -msgstr "Camadas da Jangada" +msgstr "Camadas da jangada" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "O objeto será elevado por este número de camadas de suporte. Use esta função " -"para evitar o enrugamento ao imprimir ABS" +"para evitar empenamento ao imprimir ABS." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" -"O caminho do G-code é gerado após simplificar o contorno do modelo para " -"evitar muitos pontos e linhas de código G no arquivo de código G. Um valor " -"menor significa maior resolução e mais tempo para fatiar" +"O caminho do G-code é gerado após simplificar o contorno dos modelos para " +"evitar excesso de pontos e linhas de G-code. Um valor menor significa maior " +"resolução e mais tempo para fatiar." msgid "Travel distance threshold" msgstr "Limiar de distância de deslocamento" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" -"Disparar a retração somente quando a distância da deslocamento for maior que " -"este limite" +"Acionar a retração somente quando a distância da deslocamento for maior que " +"este limiar." msgid "Retract amount before wipe" msgstr "Quantidade de retração antes da limpeza" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "O comprimento da retração rápida antes da limpeza, em relação ao comprimento " -"da retração" +"da retração." msgid "Retract when change layer" msgstr "Retrair ao mudar de camada" -msgid "Force a retraction when changes layer" -msgstr "Forçar uma retração ao mudar de camada" +msgid "Force a retraction when changes layer." +msgstr "Forçar uma retração ao mudar de camada." msgid "Retraction Length" msgstr "Distância de retração" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Alguma quantidade de material no extrusor é puxada para trás para evitar " -"oozing durante viagens longas. Defina zero para desativar a retração" +"Alguma quantidade de material na extrusora é puxada para dentro para evitar " +"vazamento durante deslocamentos longos. Defina zero para desativar a " +"retração." -msgid "Long retraction when cut(experimental)" -msgstr "Retração longa quando cortado(experimental)" +msgid "Long retraction when cut (beta)" +msgstr "Retração longa quando cortado (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Recurso experimental. Retrair e cortar o filamento a uma distância mais " -"longa durante mudanças para minimizar a purga. Isto reduz significativamente " -"a purga, pode também aumentar o risco de bolhas no bico ou de outros " -"problemas de impressão." +"Funcionalidade experimental: Retrair e cortar o filamento a uma distância " +"mais longa durante mudanças para minimizar a purga. Isto reduz " +"significativamente a purga, pode também aumentar o risco de bolhas no bico " +"ou de outros problemas de impressão." msgid "Retraction distance when cut" msgstr "Distância de retração ao cortar" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Funcionalidade experimental. Comprimento de retração antes de cortar durante " -"a mudança de filamento" +"Funcionalidade experimental: Comprimento de retração antes de cortar durante " +"a mudança de filamento." -msgid "Z hop when retract" -msgstr "Z hop ao retrair" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Altura de Z-hop" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Sempre que a retração é feita, o bico é levantado um pouco para criar folga " "entre o bico e a impressão. Isso evita que o bico atinja a impressão ao se " -"mover. Usar linha espiral para levantar z pode evitar stringing" +"mover. Usar linhas em espiral para levantar z pode evitar stringing." -msgid "Z hop lower boundary" -msgstr "Limite inferior do Z hop" +msgid "Z-hop lower boundary" +msgstr "Limite inferior do Z-hop" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"O Z hop só entrará em vigor quando Z estiver acima deste valor e abaixo do " -"parâmetro: \"Limite superior do Z hop\"" +"O Z-hop só entrará em vigor quando Z estiver acima deste valor e abaixo do " +"parâmetro: \"Limite superior do Z-hop\"." -msgid "Z hop upper boundary" -msgstr "Limite superior do Z hop" +msgid "Z-hop upper boundary" +msgstr "Limite superior do Z-hop" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Se este valor for positivo, o Z hop só entrará em vigor quando Z estiver " -"acima do parâmetro: \"Limite inferior do Z hop\" e abaixo deste valor" +"Se este valor for positivo, o Z-hop só entrará em vigor quando Z estiver " +"acima do parâmetro: \"Limite inferior do Z-hop\" e abaixo deste valor." -msgid "Z hop type" -msgstr "Tipo de Z hop" +msgid "Z-hop type" +msgstr "Tipo de Z-hop" + +msgid "Type of Z-hop." +msgstr "Tipo de Z-hop." msgid "Slope" msgstr "Declive" @@ -12621,12 +15862,14 @@ msgid "Spiral" msgstr "Espiral" msgid "Traveling angle" -msgstr "" +msgstr "Ângulo de deslocamento" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Ângulo de deslocamento para o tipo de Z-hop em Declive e Espiral. Definir " +"para 90° resulta em Elevação Normal." msgid "Only lift Z above" msgstr "Elevar Z apenas acima de" @@ -12652,10 +15895,10 @@ msgid "On surfaces" msgstr "Nas superfícies" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"Forçar Z Hop. Essa configuração é impactada pelas configurações acima " +"Forçar Z-Hop. Essa configuração é impactada pelas configurações acima " "(Somente elevar Z acima/abaixo)" msgid "All Surfaces" @@ -12670,6 +15913,18 @@ msgstr "Somente a parte inferior" msgid "Top and Bottom" msgstr "Parte superior e inferior" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Tubo" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Comprimento extra na retração" @@ -12677,7 +15932,7 @@ msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Quando a retração é compensada após o movimento de deslocamento, o extrusor " +"Quando a retração é compensada após o movimento de deslocamento, a extrusora " "empurrará essa quantidade adicional de filamento. Esta configuração é " "raramente necessária." @@ -12685,24 +15940,24 @@ msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" -"Quando a retração é compensada após a troca de ferramenta, o extrusor " +"Quando a retração é compensada após a troca de ferramenta, a extrusora " "empurrará essa quantidade adicional de filamento." msgid "Retraction Speed" msgstr "Velocidade de retração" -msgid "Speed of retractions" -msgstr "Velocidade das retratações" +msgid "Speed for retracting filament from the nozzle." +msgstr "Velocidade para retração do filamento do bico." -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Velocidade de desretração" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Velocidade para recarregar o filamento no extrusor. Zero significa mesma " -"velocidade de retração" +"Velocidade para recarregar o filamento no bico. Zero significa mesma " +"velocidade da retração." msgid "Use firmware retraction" msgstr "Usar retração de firmware" @@ -12722,28 +15977,31 @@ msgid "Disable set remaining print time" msgstr "Desabilitar definir tempo de impressão restante" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" -"Desativar a geração do M73: Definir tempo restante de impressão no código " -"final" +"Desativar a geração do M73: Definir tempo restante de impressão no G-code " +"final." msgid "Seam position" msgstr "Posição da costura" -msgid "The start position to print each part of outer wall" -msgstr "A posição inicial para imprimir cada parte do perímetro externo" +msgid "The start position to print each part of outer wall." +msgstr "A posição inicial para imprimir cada parte da parede externa." msgid "Nearest" msgstr "Mais próximo" msgid "Aligned" -msgstr "Alinhado" +msgstr "Alinhada" + +msgid "Aligned back" +msgstr "Alinhada atrás" msgid "Back" msgstr "Atrás" msgid "Random" -msgstr "Aleatório" +msgstr "Aleatória" msgid "Staggered inner seams" msgstr "Costuras internas escalonadas" @@ -12756,7 +16014,7 @@ msgstr "" "base em sua profundidade, formando um padrão de zigue-zague." msgid "Seam gap" -msgstr "Espaço entre costuras" +msgstr "Vão entre costuras" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, " @@ -12764,31 +16022,31 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current extruder diameter. The default value for this parameter is 10%." msgstr "" -"Para reduzir a visibilidade da costura em uma extrusão de loop fechado, o " -"loop é interrompido e encurtado por uma quantidade especificada.\n" +"Para reduzir a visibilidade da costura em uma extrusão de volta fechada, a " +"volta é interrompida e encurtada por uma quantidade especificada.\n" "Esta quantidade pode ser especificada em milímetros ou como uma porcentagem " -"do diâmetro atual do extrusor. O valor padrão para este parâmetro é 10%." +"do diâmetro atual da extrusora. O valor padrão para este parâmetro é 10%." msgid "Scarf joint seam (beta)" -msgstr "Costura Scarf (beta)" +msgstr "Costura junta cachecol (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use a Costura Scarf para minimizar a visibilidade da costura e aumentar a " +"Use a junta cachecol para minimizar a visibilidade da costura e aumentar a " "resistência da costura." msgid "Conditional scarf joint" -msgstr "Costura Scarf condicional" +msgstr "Junta cachecol condicional" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Aplique a Costura Scarf apenas em perímetros suaves onde costuras " +"Aplique juntas cachecol apenas em perímetros suaves onde costuras " "tradicionais não escondem as costuras em cantos agudos de forma eficaz." msgid "Conditional angle threshold" -msgstr "Ângulo condicional" +msgstr "Limiar de ângulo condicional" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12797,14 +16055,14 @@ msgid "" "(indicating the absence of sharp corners), a scarf joint seam will be used. " "The default value is 155°." msgstr "" -"Esta opção define o ângulo limite para aplicar uma costura scarf " +"Esta opção define o ângulo limiar para aplicar uma costura junta cachecol " "condicional.\n" -"Se o ângulo máximo dentro do loop do perímetro exceder esse valor (indicando " -"a ausência de cantos afiados), será usada uma costura scarf. O valor padrão " -"é 155°." +"Se o ângulo máximo dentro da volta do perímetro exceder esse valor " +"(indicando a ausência de cantos afiados), será usada uma costura junta " +"cachecol. O valor padrão é 155°." msgid "Conditional overhang threshold" -msgstr "Overhang condicional" +msgstr "Limiar de saliência condicional" #, no-c-format, no-boost-format msgid "" @@ -12814,27 +16072,27 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" -"Esta opção determina o limiar de inclinação para a aplicação de costuras " -"Scarf. Se a parte sem suporte do perímetro for inferior a esse limite, as " -"costuras Scarf serão aplicadas. O limite padrão é definido em 40% da largura " -"do perímetro externo. Devido a considerações de desempenho, o grau de " -"inclinação é estimado." +"Esta opção determina o limiar de saliência para a aplicação de juntas " +"cachecol. Se a parte sem suporte do perímetro for inferior a esse limiar, as " +"costuras junta cachecol serão aplicadas. O limiar padrão é definido em 40% " +"da largura da parede externa. Devido a considerações de desempenho, o grau " +"de saliência é estimado." msgid "Scarf joint speed" -msgstr "Velocidade da Costura Scarf" +msgstr "Velocidade da junta cachecol" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" -"Esta opção define a velocidade de impressão para as costuras Scarf. É " -"recomendável imprimir as costuras Scarf em uma velocidade baixa (menor que " +"Esta opção define a velocidade de impressão para as juntas cachecol. É " +"recomendável imprimir as juntas cachecol em uma velocidade baixa (menor que " "100 mm/s). Também é aconselhável habilitar 'Suavização da taxa de extrusão' " "se a velocidade definida variar significativamente da velocidade das paredes " "externas ou internas. Se a velocidade especificada aqui for maior que a " @@ -12844,96 +16102,98 @@ msgstr "" "externo ou interna respectiva. O valor padrão é definido como 100%." msgid "Scarf joint flow ratio" -msgstr "Fluxo da Costura Scarf" +msgstr "Fluxo da junta cachecol" msgid "This factor affects the amount of material for scarf joints." -msgstr "Este fator afeta a quantidade de material para as costuras Scarf." +msgstr "Este fator afeta a quantidade de material para as juntas cachecol." msgid "Scarf start height" -msgstr "Altura inicial da junta Scarf" +msgstr "Altura inicial do cachecol" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Altura inicial da costura Scarf.\n" +"Altura inicial do cachecol.\n" "Esta quantidade pode ser especificada em milímetros ou como uma porcentagem " "da altura atual da camada. O valor padrão para este parâmetro é 0." msgid "Scarf around entire wall" -msgstr "Costura Scarf em torno do perímetro" +msgstr "Cachecol em torno de toda a parede" msgid "The scarf extends to the entire length of the wall." -msgstr "A junta Scarf se estende por todo o comprimento do perímetro." +msgstr "O cachecol se estende por todo o comprimento da parede." msgid "Scarf length" -msgstr "Comprimento da Costura Scarf" +msgstr "Comprimento do cachecol" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Comprimento da costura Scarf. Definir este parâmetro como zero desabilita a " -"costura Scarf." +"Comprimento do cachecol. Definir este parâmetro como zero efetivamente " +"desabilita o cachecol." msgid "Scarf steps" -msgstr "Passos da junta Scarf" +msgstr "Degraus do cachecol" msgid "Minimum number of segments of each scarf." -msgstr "Número mínimo de segmentos de cada costura scarf." +msgstr "Número mínimo de segmentos de cada cachecol." msgid "Scarf joint for inner walls" -msgstr "Junta Scarf em paredes internas" +msgstr "Junta cachecol em paredes internas" msgid "Use scarf joint for inner walls as well." -msgstr "Usar costura Scarf em paredes internas também." +msgstr "Usar junta cachecol em paredes internas também." msgid "Role base wipe speed" -msgstr "Velocidade base de limpeza da função" +msgstr "Velocidade de limpeza baseada na função" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "A velocidade de limpeza é determinada pela velocidade do tipo de extrusão " -"atual. Por exemplo, se uma ação de limpeza for executada imediatamente após " -"uma extrusão de perímetro externo, a velocidade da extrusão do perímetro " -"externo será utilizada para a ação de limpeza." +"atual. Ex.: se uma ação de limpeza for executada imediatamente após uma " +"extrusão de parede externa, a velocidade da extrusão da parede externa será " +"utilizada para a ação de limpeza." msgid "Wipe on loops" -msgstr "Limpeza em loops" +msgstr "Limpeza em voltas" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " "inward movement is executed before the extruder leaves the loop." msgstr "" -"Para minimizar a visibilidade da costura em uma extrusão de loop fechado, é " -"executado um pequeno movimento para dentro antes que o extrusor saia do loop." +"Para minimizar a visibilidade da costura em uma extrusão de volta fechada, é " +"executado um pequeno movimento para dentro antes que a extrusora saia da " +"volta." msgid "Wipe before external loop" -msgstr "Limpeza antes do loop externo" +msgstr "Limpeza antes da volta externa" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Para minimizar a visibilidade de sobreextrusão potencial no início de um " -"perímetro externo ao imprimir com a ordem de impressão de perímetro Externo/" -"Interno ou Interno/Externo/Interno, a desretração é executada ligeiramente " +"perímetro externo ao imprimir com a ordem de impressão de parede Externa/" +"Interna ou Interna/Externa/Interna, a desretração é executada ligeiramente " "no interior a partir do início do perímetro externo. Dessa forma, qualquer " -"sobreextrusão potencial é ocultada da superfície externa. \n" +"sobreextrusão potencial é ocultada da superfície externa.\n" "\n" -"Isso é útil ao imprimir com a ordem de impressão de perímetro Externa/" -"Interna ou Interna/Externa/Interna, pois nesses modos é mais provável que um " +"Isso é útil ao imprimir com a ordem de impressão de parede Externa/Interna " +"ou Interna/Externa/Interna, pois nesses modos é mais provável que um " "perímetro externo seja impresso imediatamente após um movimento de " "desretração." @@ -12942,66 +16202,95 @@ msgstr "Velocidade de limpeza" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "A velocidade de limpeza é determinada pela velocidade especificada nesta " "configuração. Se o valor for expresso como uma porcentagem (por exemplo, " "80%), será calculado com base na configuração de velocidade de deslocamento " -"acima. O valor padrão para este parâmetro é 80%" +"acima. O valor padrão para este parâmetro é 80%." msgid "Skirt distance" msgstr "Distância da saia" -msgid "Distance from skirt to brim or object" -msgstr "Distância da saia para a borda ou objeto" +msgid "The distance from the skirt to the brim or the object." +msgstr "A distância da saia para a borda ou objeto." + +msgid "Skirt start point" +msgstr "Ponto de partida da saia" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Ângulo do centro do objeto ao ponto inicial da saia. Zero é a posição mais à " +"direita, sentido anti-horário é ângulo positivo." msgid "Skirt height" msgstr "Altura da saia" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Quantas camadas de saia. Geralmente apenas uma camada" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Quantas camadas de saia. Geralmente apenas uma camada." + +msgid "Single loop after first layer" +msgstr "Volta única depois da primeira camada" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Limitar as voltas da saia e escudo de ar a uma parede após a primeira " +"camada. Isso é útil ocasionalmente para conservar filamento, mas pode fazer " +"com que o escudo de ar entorte ou rache." msgid "Draft shield" -msgstr "Escudo" +msgstr "Escudo de ar" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"Um escudo é útil para proteger uma impressão ABS ou ASA de empenamento e de " -"se descolar da mesa de impressão devido à corrrentes de ar. Normalmente, só " -"é necessária com impressoras abertas, ou seja, sem câmara fechada. \n" +"Um escudo de ar é útil para proteger uma impressão ABS ou ASA de deformações " +"e desprendimento da mesa de impressão devido à corrente de ar. Geralmente, " +"ele é necessário apenas com impressoras de estrutura aberta, ou seja, sem um " +"gabinete.\n" "\n" -"Opções:\n" -"Ativado = saia tem a mesma altura que o maior objeto a ser impresso.\n" -"Limitado = saia tem altura especificada pela altura de saia.\n" -"\n" -"Nota: Com o escudo ativo, a saia será impressa na distância de saia do " -"objeto. Portanto, se bordas estiverem ativas, pode se interceptar com eles. " -"Para evitar isso, aumente o valor da distância da saia.\n" - -msgid "Limited" -msgstr "Limitada" +"Habilitado = a saia é tão alta quanto o objeto impresso mais alto. Caso " +"contrário, 'Altura da saia' é usada.\n" +"Observação: com o escudo de ar ativo, a saia será impressa na distância da " +"saia do objeto. Portanto, se as bordas estiverem ativas, ela pode se cruzar " +"com elas. Para evitar isso, aumente o valor da distância da saia.\n" msgid "Enabled" msgstr "Ativado" +msgid "Skirt type" +msgstr "Tipo de saia" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Combinado - saia única para todos os objetos, Por objeto - saias individuais " +"por objeto." + +msgid "Per object" +msgstr "Por objeto" + msgid "Skirt loops" msgstr "Voltas da saia" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "Número de voltas da saia. Zero significa desativar a saia" +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Número de voltas da saia. Zero significa desativar a saia." msgid "Skirt speed" msgstr "Velocidade da saia" @@ -13018,32 +16307,43 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"Comprimento mínimo de extrusão de filamento em mm ao imprimir a saia. Zero " -"significa que esta característica está desabilitada.\n" +"Comprimento mínimo de extrusão do filamento em mm ao imprimir a saia. Zero " +"significa que esse recurso está desabilitado.\n" "\n" -"Usar um valor não zero é útil se a impressora estiver configurada para " -"imprimir sem uma linha de limpeza." +"Usar um valor diferente de zero é útil se a impressora estiver configurada " +"para imprimir sem uma linha principal.\n" +"O número final de voltas não está sendo levado em consideração ao organizar " +"ou validar a distância dos objetos. Aumente o número de voltas nesse caso." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" -"A velocidade de impressão no gcode exportado será reduzida quando o tempo " -"estimado da camada for menor que esse valor, para obter uma melhor " -"resfriamento para essas camadas" +"A velocidade de impressão no G-code exportado será reduzida quando o tempo " +"estimado da camada for menor que esse valor, para obter melhor resfriamento " +"para essas camadas." msgid "Minimum sparse infill threshold" -msgstr "Limiar mínimo de preenchimento" +msgstr "Limiar mínimo de preenchimento esparso" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"A área de preenchimento não sólido que é menor que o valor de limiar é " -"substituída por preenchimento sólido interno" +"A área de preenchimento esparso que é menor que o valor limiar é substituída " +"por preenchimento sólido interno." + +msgid "Solid infill" +msgstr "Preenchimento sólido" + +msgid "Filament to print solid infill." +msgstr "Filamento para imprimir o preenchimento sólido." msgid "" "Line width of internal solid infill. If expressed as a %, it will be " @@ -13052,39 +16352,69 @@ msgstr "" "Largura da linha de preenchimento sólido interno. Se expresso como uma %, " "será calculado sobre o diâmetro do bico." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Velocidade de preenchimento sólido interno, não a superfície superior e " -"inferior" +"inferior." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"A espiralização suaviza os movimentos z do contorno externo. E transforma um " -"modelo sólido em uma impressão de perímetro único com camadas inferiores " -"sólidas. O modelo final gerado não tem costura" +"A espiralização suaviza os movimentos Z do contorno externo. E transforma um " +"modelo sólido em uma impressão de parede única com camadas inferiores " +"sólidas. O modelo final gerado não tem costura." msgid "Smooth Spiral" msgstr "Espiral Suave" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "A Espiral Suave suaviza os movimentos X e Y, resultando em nenhuma costura " -"visível, mesmo nas direções XY em paredes que não são verticais" +"visível, mesmo nas direções XY em paredes que não são verticais." msgid "Max XY Smoothing" msgstr "Suavização Máxima XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Distância máxima para mover pontos em XY para tentar obter uma espiral " -"suave. Se expresso como uma %, será calculado sobre o diâmetro do bico" +"suave. Se expresso como %, será computado sobre o diâmetro do bico." + +msgid "Spiral starting flow ratio" +msgstr "Taxa de fluxo inicial de espiral" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Define a taxa de fluxo inicial durante a transição da última camada inferior " +"para a espiral. Normalmente, a transição em espiral dimensiona a taxa de " +"fluxo de 0% a 100% durante a primeira volta, o que pode em alguns casos " +"levar à subextrusão no início da espiral." + +msgid "Spiral finishing flow ratio" +msgstr "Taxa de fluxo de acabamento de espiral" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Define a taxa de fluxo de acabamento ao finalizar a espiral. Normalmente a " +"transição em espiral dimensiona a taxa de fluxo de 100% a 0% durante a " +"última volta, o que pode em alguns casos levar à subextrusão no final da " +"espiral." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13096,14 +16426,14 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"Se o modo suave ou tradicional for selecionado, um vídeo em time-lapse será " +"Se o modo suave ou tradicional for selecionado, um vídeo em timelapse será " "gerado para cada impressão. Após cada camada ser impressa, uma captura de " "tela é feita com a câmera da câmara. Todas essas capturas de tela são " -"compostas em um vídeo em time-lapse quando a impressão é concluída. Se o " -"modo suave for selecionado, a extrusora se moverá para fora após cada camada " -"ser impressa e então tirará uma captura de tela. Como o filamento derretido " -"pode vazar do bico durante o processo de tirar uma captura de tela, é " -"necessário uma Torre Prime para o modo suave para limpar o bico." +"compostas em um vídeo em timelapse quando a impressão é concluída. Se o modo " +"suave for selecionado, a extrusora se moverá para fora após cada camada ser " +"impressa e então tirará uma captura de tela. Como o filamento derretido pode " +"vazar do bico durante o processo de tirar uma captura de tela, é necessário " +"uma torre de preparo para o modo suave para limpar o bico." msgid "Traditional" msgstr "Tradicional" @@ -13111,20 +16441,55 @@ msgstr "Tradicional" msgid "Temperature variation" msgstr "Variação de temperatura" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Diferença de temperatura a ser aplicada quando uma extrusora não estiver " +"ativa. O valor não é usado quando 'idle_temperature' nas configurações de " +"filamento é definido como valor diferente de zero." + +msgid "Preheat time" +msgstr "Tempo de pré-aquecimento" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Para reduzir o tempo de espera após a troca de ferramenta, o Orca pode pré-" +"aquecer a próxima ferramenta enquanto a ferramenta atual ainda está em uso. " +"Esta configuração especifica o tempo em segundos para pré-aquecer a próxima " +"ferramenta. O Orca irá inserir um comando M104 para pré-aquecer a ferramenta " +"com antecedência." + +msgid "Preheat steps" +msgstr "Passos de pré-aquecimento" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Insire múltiplos comandos de pré-aquecimento (por exemplo, M104.1). Útil " +"apenas para Prusa XL. Para outras impressoras, defina como 1." + msgid "Start G-code" -msgstr "Código de Início" +msgstr "G-code Inicial" -msgid "Start G-code when start the whole printing" -msgstr "Código de início ao iniciar a impressão completa" +msgid "Start G-code when starting the entire print." +msgstr "G-code inicial ao iniciar a impressão completa." -msgid "Start G-code when start the printing of this filament" -msgstr "Código de início ao iniciar a impressão deste filamento" +msgid "Start G-code when starting the printing of this filament." +msgstr "G-code inicial ao iniciar a impressão deste filamento." msgid "Single Extruder Multi Material" -msgstr "Múltiplos Materiais com um Extrusor" +msgstr "Multimaterial com Extrusora Única" -msgid "Use single nozzle to print multi filament" -msgstr "Use um único bico para imprimir múltiplos filamentos" +msgid "Use single nozzle to print multi filament." +msgstr "Use um único bico para imprimir múltiplos filamentos." msgid "Manual Filament Change" msgstr "Troca Manual de Filamento" @@ -13136,57 +16501,57 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"Ative esta opção para omitir o código G de troca de filamento personalizado " +"Ative esta opção para omitir o G-code de troca de filamento personalizado " "apenas no início da impressão. O comando de troca de ferramenta (por " "exemplo, T0) será ignorado durante toda a impressão. Isso é útil para " "impressão manual de vários materiais, onde usamos M600/PAUSE para acionar a " "ação de troca manual de filamento." msgid "Purge in prime tower" -msgstr "Purgar na Torre Prime" +msgstr "Purgar na torre de preparo" -msgid "Purge remaining filament into prime tower" -msgstr "Purgar o filamento restante na Torre Prime" +msgid "Purge remaining filament into prime tower." +msgstr "Purgar o filamento restante na torre de preparo." msgid "Enable filament ramming" -msgstr "Ativar moldeamento de ponta de filamento" +msgstr "" msgid "No sparse layers (beta)" msgstr "Sem camadas esparsas (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Se ativado, a Torre Prime não será impressa em camadas sem troca de " -"ferramenta. Em camadas com uma troca de ferramenta, a extrusora viajará para " -"baixo para imprimir a Torre Prime. O usuário é responsável por garantir que " -"não haja colisão com a impressão." +"Se ativado, a torre de limpeza não será impressa em camadas sem troca de " +"ferramenta. Em camadas com uma troca de ferramenta, a extrusora deslocará " +"para baixo para imprimir a torre de limpeza. O usuário é responsável por " +"garantir que não haja colisão com a impressão." msgid "Prime all printing extruders" -msgstr "Primer todos os extrusores de impressão" +msgstr "Preparar todas as extrusoras de impressão" msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Se ativado, todos os extrusores de impressão serão iniciados na borda " +"Se ativado, todos as extrusoras de impressão serão preparados na borda " "frontal da mesa de impressão no início da impressão." msgid "Slice gap closing radius" -msgstr "Tolerância do fatiamento" +msgstr "Raio de fechamento de vãos de fatiamento" msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Espaços menores que 2x a tolerância de fatiamentoo serão preenchidas durante " -"o fatiamento da malha. Aumentar a tolerância de fatiamento pode reduzir a " -"resolução final da impressão, portanto, é aconselhável manter o valor " -"razoavelmente baixo." +"Frestas menores que 2x o vão de fatiamento serão preenchidas durante o " +"fatiamento da malha de triângulos. O fechamento de vãos de fatiamento pode " +"reduzir a resolução final da impressão, portanto é aconselhável manter o " +"valor razoavelmente baixo." msgid "Slicing Mode" msgstr "Modo de Fatiamento" @@ -13217,7 +16582,7 @@ msgid "" "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "Este valor será adicionado (ou subtraído) de todas as coordenadas Z no G-" -"code de saída. É usado para compensar a má posição do fim de curso Z: por " +"code emitido. É usado para compensar a má posição do fim de curso Z: por " "exemplo, se o zero do seu fim de curso na verdade deixa o bico 0,3 mm longe " "da mesa de impressão, ajuste isso para -0,3 (ou corrija o seu fim de curso)." @@ -13228,44 +16593,52 @@ msgid "Enable support generation." msgstr "Ativar a geração de suporte." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normal(auto) e tree(auto) são usados para gerar suporte automaticamente. Se " -"normal(manual) ou tree(manual) for selecionado, apenas os suportes são " -"gerados" +"Normal (automático) e Árvore (automático) são usados para gerar suporte " +"automaticamente. Se Normal (manual) ou Árvore (manual) for selecionado, " +"apenas os reforçadores de suporte serão gerados." -msgid "normal(auto)" -msgstr "normal(automático)" +msgid "Normal (auto)" +msgstr "Normal (automático)" -msgid "tree(auto)" -msgstr "árvore(automático)" +msgid "Tree (auto)" +msgstr "Árvore (automático)" -msgid "normal(manual)" -msgstr "normal(manual)" +msgid "Normal (manual)" +msgstr "Normal (manual)" -msgid "tree(manual)" -msgstr "árvore(manual)" +msgid "Tree (manual)" +msgstr "Árvore (manual)" -msgid "Support/object xy distance" -msgstr "Distância xy entre suporte e objeto" +msgid "Support/object XY distance" +msgstr "Distância XY entre suporte e objeto" -msgid "XY separation between an object and its support" -msgstr "Separação XY entre um objeto e seu suporte" +msgid "XY separation between an object and its support." +msgstr "Separação XY entre um objeto e seu suporte." + +msgid "Support/object first layer gap" +msgstr "Vão na primeira camada entre suporte e objeto" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Separação XY entre um objeto e seu suporte na primeira camada." msgid "Pattern angle" msgstr "Ângulo de padrão" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "" -"Use esta configuração para girar o padrão de suporte no plano horizontal." +"Use esta configuração para rotacionar o padrão de suporte no plano " +"horizontal." msgid "On build plate only" -msgstr "Somente na mesa" +msgstr "Apenas na placa de impressão" -msgid "Don't create support on model surface, only on build plate" -msgstr "Não criar suporte na superfície do modelo, apenas na mesa" +msgid "Don't create support on model surface, only on build plate." +msgstr "" +"Não criar suporte na superfície do modelo, apenas na placa de impressão." msgid "Support critical regions only" msgstr "Suportar apenas regiões críticas" @@ -13277,33 +16650,33 @@ msgstr "" "Crie suporte apenas para regiões críticas, incluindo cauda afiada, balanço, " "etc." -msgid "Remove small overhangs" -msgstr "Remover pequenos overhangs" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Remova pequenos balanços que possivelmente não precisam de suporte." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Distância Z superior" -msgid "The z gap between the top support interface and object" -msgstr "A diferença z entre a interface superior de suporte e o objeto" +msgid "The Z gap between the top support interface and object." +msgstr "O vão Z entre a interface superior de suporte e o objeto." msgid "Bottom Z distance" msgstr "Distância Z inferior" -msgid "The z gap between the bottom support interface and object" -msgstr "A diferença z entre a interface inferior de suporte e o objeto" +msgid "The Z gap between the bottom support interface and object." +msgstr "O vão Z entre a interface inferior de suporte e o objeto." msgid "Support/raft base" -msgstr "Suporte/Jangada" +msgstr "Base de suporte/jangada" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Filamento para imprimir Jangada e Suporte. \"Padrão\" significa nenhum " -"filamento específico para Suporte e o filamento atual será usado" +"Filamento para imprimir base de suporte e jangada. \"Padrão\" significa " +"nenhum filamento específico para suporte e o filamento atual será usado." msgid "Avoid interface filament for base" msgstr "Evitar o filamento da interface para a base" @@ -13322,35 +16695,35 @@ msgstr "" "diâmetro do bico." msgid "Interface use loop pattern" -msgstr "Interface usa padrão de loop" +msgstr "Interface usa padrão de volta" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Cubra a camada de contato superior dos suportes com loops. Desativado por " +"Cobrir a camada de contato superior dos suportes com voltas. Desativado por " "padrão." msgid "Support/raft interface" -msgstr "Interface de Suporte/Jangada" +msgstr "Interface de suporte/jangada" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filamento para imprimir a interface de suporte. \"Padrão\" significa nenhum " -"filamento específico para a interface de suporte e o filamento atual é usado" +"filamento específico para a interface de suporte e o filamento atual é usado." msgid "Top interface layers" msgstr "Camadas de interface superior" -msgid "Number of top interface layers" -msgstr "Número de camadas de interface superior" +msgid "Number of top interface layers." +msgstr "Número de camadas de interface superior." msgid "Bottom interface layers" msgstr "Camadas de interface inferior" -msgid "Number of bottom interface layers" -msgstr "Número de camadas de interface inferior" +msgid "Number of bottom interface layers." +msgstr "Número de camadas de interface inferior." msgid "Same as top" msgstr "Mesmo que superior" @@ -13358,24 +16731,29 @@ msgstr "Mesmo que superior" msgid "Top interface spacing" msgstr "Espaçamento da interface superior" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Espaçamento das linhas de interface. Zero significa interface sólida" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" +"Espaçamento das linhas de interface. Zero significa interface sólida.\n" +"Força o uso de interface sólida quando passar a ferro está habilitado." msgid "Bottom interface spacing" msgstr "Espaçamento da interface inferior" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" -"Espaçamento das linhas de interface inferior. Zero significa interface sólida" +"Espaçamento das linhas de interface inferior. Zero significa interface " +"sólida." -msgid "Speed of support interface" -msgstr "Velocidade da interface de suporte" +msgid "Speed of support interface." +msgstr "Velocidade da interface de suporte." msgid "Base pattern" msgstr "Padrão da base" -msgid "Line pattern of support" -msgstr "Padrão de linha de suporte" +msgid "Line pattern of support." +msgstr "Padrão de linha de suporte." msgid "Rectilinear grid" msgstr "Grade reticulada" @@ -13389,11 +16767,11 @@ msgstr "Padrão de interface" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Padrão de linha de interface de suporte. O padrão padrão para interface de " -"suporte não solúvel é reticulado, enquanto o padrão padrão para interface de " -"suporte solúvel é concêntrico" +"suporte não solúvel é Reticulado, enquanto o padrão padrão para interface de " +"suporte solúvel é Concêntrico." msgid "Rectilinear Interlaced" msgstr "Reticulado Interligado" @@ -13401,17 +16779,17 @@ msgstr "Reticulado Interligado" msgid "Base pattern spacing" msgstr "Espaçamento do padrão de base" -msgid "Spacing between support lines" -msgstr "Espaçamento entre as linhas de suporte" +msgid "Spacing between support lines." +msgstr "Espaçamento entre as linhas de suporte." msgid "Normal Support expansion" msgstr "Expansão normal de suporte" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "Expanda (+) ou contraia (-) a extensão horizontal do suporte normal" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." +msgstr "Expanda (+) ou contraia (-) a extensão horizontal do suporte normal." -msgid "Speed of support" -msgstr "Velocidade do suporte" +msgid "Speed of support." +msgstr "Velocidade do suporte." msgid "" "Style and shape of the support. For normal support, projecting the supports " @@ -13429,11 +16807,17 @@ msgstr "" "Para suporte de árvore, estilo fino e orgânico mesclarão os galhos de forma " "mais agressiva e economizarão muito material (orgânico padrão), enquanto o " "estilo híbrido criará uma estrutura semelhante ao suporte normal em grandes " -"overhangs planas." +"saliências planas." + +msgid "Default (Grid/Organic)" +msgstr "Padrão (Grade/Orgânico)" msgid "Snug" msgstr "Ajustado" +msgid "Organic" +msgstr "Orgânico" + msgid "Tree Slim" msgstr "Árvore Estreita" @@ -13443,43 +16827,52 @@ msgstr "Árvore Forte" msgid "Tree Hybrid" msgstr "Árvore Híbrida" -msgid "Organic" -msgstr "Orgânico" - msgid "Independent support layer height" msgstr "Altura independente da camada de suporte" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "A camada de suporte usa uma altura de camada independente da camada do " -"objeto. Isso é para suportar a personalização do z-gap e economizar tempo de " -"impressão. Esta opção será inválida quando a Torre Prime estiver ativa." +"objeto. Isso é para suportar a personalização do vão-Z e economizar tempo de " +"impressão. Esta opção será inválida quando a torre de preparo estiver ativa." msgid "Threshold angle" -msgstr "Ângulo de limite" +msgstr "Ângulo limiar" msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." msgstr "" -"O suporte será gerado para overhangs cujo ângulo de inclinação estiver " -"abaixo do limite." +"O suporte será gerado para saliências cujo ângulo de inclinação estiver " +"abaixo do limiar." -msgid "Tree support branch angle" -msgstr "Ângulo da ramificação" +msgid "Threshold overlap" +msgstr "Sobreposição de limiar" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Se o ângulo limiar for zero, o suporte será gerado para saliências cuja " +"sobreposição estiver abaixo do limiar. Quanto menor for esse valor, mais " +"íngreme será a saliência que pode ser impressa sem suporte." + +msgid "Tree support branch angle" +msgstr "Ângulo da ramificação da árvore de suporte" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"Esta configuração determina o ângulo máximo de inclinação que as " -"ramificações de suporte de árvore podem fazer. Se o ângulo for aumentado, as " -"ramificações podem ser impressas de forma mais horizontal, permitindo que " -"alcancem mais longe." +"Esta configuração determina o ângulo máximo de saliência que as ramificações " +"de suporte de árvore podem fazer. Se o ângulo for aumentado, as ramificações " +"podem ser impressas de forma mais horizontal, permitindo que alcancem mais " +"longe." msgid "Preferred Branch Angle" msgstr "Ângulo preferido da ramificação" @@ -13516,36 +16909,26 @@ msgid "" "needed." msgstr "" "Ajusta a densidade da estrutura de suporte usada para gerar as pontas das " -"ramificações. Um valor mais alto resulta em overhangs melhores, mas os " +"ramificações. Um valor mais alto resulta em saliências melhores, mas os " "suportes são mais difíceis de remover, portanto, é recomendável ativar as " "interfaces superiores de suporte em vez de um valor de densidade de ramo " "alto se forem necessárias interfaces densas." -msgid "Adaptive layer height" -msgstr "Altura de camada adaptativa" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Ao ativar essa opção, a altura da camada de suporte de árvore, exceto a " -"primeira, será calculada automaticamente " - msgid "Auto brim width" msgstr "Largura de borda automática" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" -"Ao ativar essa opção, a largura da borda para suporte de árvore será " -"calculada automaticamente" +"Ativar essa opção significa que a largura da borda para suporte de árvore " +"será calculada automaticamente." msgid "Tree support brim width" msgstr "Largura da borda de suporte de árvore" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Distância do ramo da árvore até a linha de borda mais externa" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Distância do ramo da árvore até a linha de borda mais externa." msgid "Tip Diameter" msgstr "Diâmetro da ponta" @@ -13576,90 +16959,149 @@ msgstr "" "tenham espessura uniforme ao longo de seu comprimento. Um pequeno ângulo " "pode aumentar a estabilidade do suporte orgânico." -msgid "Branch Diameter with double walls" -msgstr "Diâmetro da ramificação com perí. duplo" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Ramificações com área maior do que a área de um círculo com este diâmetro " -"serão impressas com paredes duplas para estabilidade. Defina este valor como " -"zero para não ter paredes duplas." - msgid "Support wall loops" -msgstr "Perímetros de suporte" +msgstr "Voltas de parede de suporte" -msgid "This setting specify the count of walls around support" -msgstr "Esta configuração especifica a contagem de paredes ao redor do suporte" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Esta configuração especifica a contagem de paredes de suporte no intervalo " +"de [0,2]. 0 significa automático." msgid "Tree support with infill" msgstr "Suporte de árvore com preenchimento" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Essa configuração especifica se deve adicionar preenchimento dentro de " -"grandes cavidades do suporte de árvore" +"grandes cavidades do suporte de árvore." + +msgid "Ironing Support Interface" +msgstr "Passar a Ferro a Interface de Suporte" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"A passagem a ferro utiliza um fluxo pequeno para imprimir na mesma altura da " +"interface de suporte novamente para torná-la mais lisa. Esta configuração " +"controla se a interface de suporte está sendo passada a ferro. Quando " +"ativada, a interface de suporte também será extrudada como sólida." + +msgid "Support Ironing Pattern" +msgstr "Padrão de Passar a Ferro no Suporte" + +msgid "Support Ironing flow" +msgstr "Fluxo de Passar a Ferro no Suporte" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"A quantidade de material a extrudar durante o passar a ferro. Relativo ao " +"fluxo da altura normal da camada de interface. Um valor muito alto resulta " +"em superextrusão na superfície." + +msgid "Support Ironing line spacing" +msgstr "Espaçamento de Passar a Ferro no Suporte" msgid "Activate temperature control" msgstr "Ativar controle de temperatura" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Ative esta opção para controle de temperatura da câmara. Um comando M191 " -"será adicionado antes de \"machine_start_gcode\"\n" -"Comandos G-code: M141/M191 S(0-255)" +"Habilite esta opção para controle automatizado da temperatura da câmara. " +"Esta opção ativa a emissão de um comando M191 antes do \"machine_start_gcode" +"\"\n" +"que define a temperatura da câmara e aguarda até que ela seja atingida. Além " +"disso, emite um comando M141 no final da impressão para desligar o aquecedor " +"da câmara, se presente.\n" +"\n" +"Esta opção depende do firmware que suporta os comandos M191 e M141 por meio " +"de macros ou nativamente e geralmente é usada quando um aquecedor de câmara " +"ativo está instalado." msgid "Chamber temperature" msgstr "Temperatura da câmara" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Uma temperatura mais alta na câmara pode ajudar a suprimir ou reduzir o " -"empenamento e potencialmente levar a uma maior resistência de ligação entre " -"camadas para materiais de alta temperatura como ABS, ASA, PC, PA e assim por " -"diante. Ao mesmo tempo, a filtragem de ar de ABS e ASA ficará pior. Para " -"PLA, PETG, TPU, PVA e outros materiais de baixa temperatura, a temperatura " -"real da câmara não deve ser alta para evitar obstruções, portanto, é " -"altamente recomendável usar 0, que significa desligado" +"Para materiais de alta temperatura como ABS, ASA, PC e PA, uma temperatura " +"de câmara mais alta pode ajudar a suprimir ou reduzir a deformação e " +"potencialmente levar a uma maior resistência de ligação entre camadas. No " +"entanto, ao mesmo tempo, uma temperatura de câmara mais alta reduzirá a " +"eficiência da filtragem de ar para ABS e ASA.\n" +"\n" +"Para PLA, PETG, TPU, PVA e outros materiais de baixa temperatura, esta opção " +"deve ser desabilitada (definida como 0), pois a temperatura da câmara deve " +"ser baixa para evitar o entupimento da extrusora causado pelo amolecimento " +"do material na quebra de calor.\n" +"\n" +"Se habilitado, este parâmetro também define uma variável G-code chamada " +"chamber_temperature, que pode ser usada para passar a temperatura desejada " +"da câmara para sua macro de início de impressão ou uma macro de absorção de " +"calor como esta: PRINT_START (outras variáveis) " +"CHAMBER_TEMP=[chamber_temperature]. Isso pode ser útil se sua impressora não " +"suportar comandos M141/M191 ou se você desejar lidar com a absorção de calor " +"na macro de início de impressão se nenhum aquecedor de câmara ativo estiver " +"instalado." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Temperatura do bico para camadas após a inicial" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Temperatura do bico para camadas após a inicial." msgid "Detect thin wall" -msgstr "Detectar perímetro fino" +msgstr "Detectar parede fina" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Detecta paredes finas que não podem conter duas larguras de linha. E usa uma " "linha única para imprimir. Talvez seja impresso não muito bem, porque não é " -"um loop fechado" +"uma volta fechada." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -"Este gcode é inserido ao trocar o filamento, incluindo o comando T para " -"acionar a troca de ferramenta" +"Este G-code é inserido ao trocar o filamento, incluindo o comando T para " +"acionar a troca de ferramenta." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Esse gcode é inserido quando o tipo de extrusão muda" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Esse G-code é inserido quando o tipo de extrusão é alterado." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " @@ -13668,75 +17110,104 @@ msgstr "" "Largura da linha para superfícies superiores. Se expressa em %, será " "calculada sobre o diâmetro do bico." -msgid "Speed of top surface infill which is solid" -msgstr "Velocidade de preenchimento da superfície superior, que é sólida" +msgid "Speed of top surface infill which is solid." +msgstr "Velocidade de preenchimento da superfície superior, que é sólida." msgid "Top shell layers" -msgstr "Camadas de topo" +msgstr "Camadas de topo da casca" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" -"Este é o número de camadas sólidas do perímetro superior, incluindo a camada " -"da superfície superior. Quando a espessura calculada por este valor for " -"menor do que a espessura do perímetro superior, as camadas do perímetro " -"superior serão aumentadas" +"Este é o número de camadas sólidas da casca do topo, incluindo a camada da " +"superfície superior. Quando a espessura calculada por este valor for menor " +"do que a espessura da casca do topo, as camadas da casca do topo serão " +"aumentadas." msgid "Top solid layers" msgstr "Camadas sólidas superiores" msgid "Top shell thickness" -msgstr "Espessura da parede de topo" +msgstr "Espessura da casca do topo" msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "O número de camadas sólidas superiores é aumentado ao fatiar se a espessura " -"calculada pelas camadas da parede superior for menor do que este valor. Isso " -"pode evitar que a parede seja muito fina quando a altura da camada é " -"pequena. 0 significa que esta configuração está desativada e a espessura da " -"parede superior é determinada exclusivamente pelas camadas da parede superior" +"calculada pelas camadas da casca do topo for menor do que este valor. Isso " +"pode evitar que a casca seja muito fina quando a altura da camada é pequena. " +"0 significa que esta configuração está desativada e a espessura da casca do " +"topo é determinada exclusivamente pelas camadas da casca do topo." -msgid "Speed of travel which is faster and without extrusion" -msgstr "Velocidade de deslocamento mais rápida e sem extrusão" +msgid "Top surface density" +msgstr "Densidade da superfície superior" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Densidade da camada superior. Um valor de 100% cria uma camada superior " +"totalmente sólida e lisa. Reduzir esse valor resulta em uma superfície " +"superior texturizada, de acordo com o padrão de superfície superior " +"escolhido. Um valor de 0% resultará na criação apenas das paredes da camada " +"superior. Destinado a fins estéticos ou funcionais, não para corrigir " +"problemas como extrusão excessiva." + +msgid "Bottom surface density" +msgstr "Densidade da superfície inferior" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Densidade da camada inferior. Destina-se a fins estéticos ou funcionais, não " +"para corrigir problemas como extrusão excessiva.\n" +"AVISO: Reduzir este valor pode afetar negativamente a aderência à mesa." + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Velocidade de deslocamento mais rápida e sem extrusão." msgid "Wipe while retracting" msgstr "Limpar enquanto retrai" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Movimentar o bico ao longo do último caminho de extrusão ao retrair para " -"limpar o material vazado no bico. Isso pode minimizar a formação de blob " -"quando imprimir uma nova peça após o deslocamento" +"limpar o material vazado no bico. Isso pode minimizar a formação de blobs " +"quando imprimir uma nova peça após o deslocamento." msgid "Wipe Distance" -msgstr "Distância de limpeza" +msgstr "Distância de Limpeza" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" "Descreva por quanto tempo o bico se moverá ao longo do último caminho ao " -"retrair. \n" +"retrair.\n" "\n" "Dependendo de quanto tempo dura a operação de limpeza, quão rápidas e longas " -"são as configurações de retração do extrusor/filamento, pode ser necessário " -"um movimento de retração para recolher o filamento restante. \n" +"são as configurações de retração da extrusora/filamento, pode ser necessário " +"um movimento de retração para recolher o filamento restante.\n" "\n" "Definir um valor na configuração de quantidade de retração antes da limpeza " "abaixo executará qualquer retração em excesso antes da limpeza, caso " @@ -13747,9 +17218,15 @@ msgid "" "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"A Torre Prime pode ser usada para limpar o resíduo no bico e estabilizar a " -"pressão na câmara dentro do bico, a fim de evitar defeitos de aparência ao " -"imprimir objetos." +"A torre de limpeza pode ser usada para limpar o resíduo no bico e " +"estabilizar a pressão na câmara dentro do bico, a fim de evitar defeitos de " +"aparência ao imprimir objetos." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "Volumes de purga" @@ -13765,19 +17242,26 @@ msgstr "" "pelos volumes de purga na tabela." msgid "Prime volume" -msgstr "Volume de material" +msgstr "Volume de preparação" msgid "The volume of material to prime extruder on tower." msgstr "O volume de material para preparar a extrusora na torre." -msgid "Width of prime tower" -msgstr "Largura da Torre Prime" +msgid "Width of the prime tower." +msgstr "Largura da torre de preparo." msgid "Wipe tower rotation angle" -msgstr "Ângulo de rotação da Torre Prime" +msgstr "Ângulo de rotação da torre de limpeza" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Ângulo de rotação da Torre Prime em relação ao eixo x." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Ângulo de rotação da torre de limpeza em relação ao eixo X." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" +"Largura da borda da torre de preparação, um número negativo significa largura " +"calculada automaticamente com base na altura da torre de preparação." msgid "Stabilization cone apex angle" msgstr "Ângulo do ápice do cone de estabilização" @@ -13786,17 +17270,11 @@ msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Ângulo no ápice do cone usado para estabilizar a Torre Prime. Um ângulo " +"Ângulo no ápice do cone usado para estabilizar a torre de limpeza. Um ângulo " "maior significa uma base mais larga." -msgid "Wipe tower purge lines spacing" -msgstr "Espaçamento das linhas de purga da Torre Prime" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Espaçamento das linhas de purga na Torre Prime." - msgid "Maximum wipe tower print speed" -msgstr "Velocidade máxima de impressão da Torre Prime" +msgstr "Velocidade máxima de impressão da torre de limpeza" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " @@ -13812,17 +17290,17 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" -"A velocidade máxima de impressão ao purgar na Torre Prime e ao imprimir as " -"camadas esparsas da Torre Prime. Ao purgar, se a velocidade do preenchimento " -"ou a velocidade calculada a partir da velocidade volumétrica máxima do " -"filamento for menor, a menor será utilizada.\n" +"A velocidade máxima de impressão ao purgar na torre de limpeza e ao imprimir " +"as camadas esparsas da torre de limpeza. Ao purgar, se a velocidade do " +"preenchimento esparso ou a velocidade calculada a partir da velocidade " +"volumétrica máxima do filamento for menor, a menor será utilizada.\n" "\n" "Ao imprimir as camadas esparsas, se a velocidade do perímetro interno ou a " "velocidade calculada a partir da velocidade volumétrica máxima do filamento " @@ -13830,24 +17308,64 @@ msgstr "" "\n" "Aumentar essa velocidade pode afetar a estabilidade da torre, bem como " "aumentar a força com que o bico colide com quaisquer bolhas que possam ter " -"se formado na Torre Prime.\n" +"se formado na torre de limpeza.\n" "\n" -"Antes de aumentar esse parâmetro além do padrão de 90mm/s, certifique-se de " +"Antes de aumentar esse parâmetro além do padrão de 90 mm/s, certifique-se de " "que sua impressora pode realizar pontes de forma confiável nas velocidades " -"aumentadas e que a extrusão ao trocar a ferramenta está bem controlada.\n" +"aumentadas e que o vazamento ao trocar a ferramenta está bem controlado.\n" "\n" -"Para os perímetros externos da Torre Prime, a velocidade do perímetro " +"Para os perímetros externos da torre de limpeza, a velocidade do perímetro " "interno é utilizada independentemente dessa configuração." -msgid "Wipe tower extruder" -msgstr "Extrusora da Torre Prime" +msgid "Wall type" +msgstr "Tipo de parede" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Tipo de parede externa da torre de limpeza.\n" +"1. Retângulo: O tipo de parede padrão, um retângulo com largura e altura " +"fixas.\n" +"2. Cone: Um cone com um filete na parte inferior para ajudar a estabilizar a " +"torre de limpeza.\n" +"3. Nervura: Adiciona quatro nervuras à parede da torre para maior " +"estabilidade." + +msgid "Extra rib length" +msgstr "Comprimento extra de nervura" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Valores positivos podem aumentar o tamanho da parede da nervura, enquanto " +"valores negativos podem reduzi-lo. No entanto, o tamanho da parede da " +"nervura não pode ser menor que o determinado pelo volume de limpeza." + +msgid "Rib width" +msgstr "Largura da nervura" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"Extrusor a ser usada ao imprimir o perímetro da Torre Prime. Defina como 0 " -"para usar a disponível (não solúvel é preferido)." +"A extrusora a ser usada ao imprimir o perímetro da torre de limpeza. Defina " +"como 0 para usar a disponível (não solúvel é preferido)." msgid "Purging volumes - load/unload volumes" msgstr "Volumes de purga - volumes de carga/descarga" @@ -13858,8 +17376,20 @@ msgid "" "volumes below." msgstr "" "Este vetor salva os volumes necessários para mudar de/para cada ferramenta " -"usada na Torre Prime. Esses valores são usados para simplificar a criação " -"dos volumes de purga completos abaixo." +"usada na torre de limpeza. Esses valores são usados para simplificar a " +"criação dos volumes de purga completos abaixo." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13871,7 +17401,7 @@ msgstr "" "objetos. Isso pode reduzir a quantidade de resíduos e diminuir o tempo de " "impressão. Se as paredes forem impressas com filamento transparente, o " "preenchimento de cor mista será visível do lado de fora. Isso não terá " -"efeito, a menos que a Torre Prime esteja ativa." +"efeito, a menos que a torre de preparo esteja ativa." msgid "" "Purging after filament change will be done inside objects' support. This may " @@ -13880,50 +17410,82 @@ msgid "" msgstr "" "A purga após a troca de filamento será feita dentro do suporte dos objetos. " "Isso pode reduzir a quantidade de resíduos e diminuir o tempo de impressão. " -"Isso não terá efeito, a menos que a Torre Prime esteja ativa." +"Isso não terá efeito, a menos que a torre de preparo esteja ativa." msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Este objeto será usado para purgar o bico após uma troca de filamento para " "economizar filamento e diminuir o tempo de impressão. As cores dos objetos " -"serão misturadas como resultado. Isso não terá efeito, a menos que a Torre " -"Prime esteja ativa." +"serão misturadas como resultado. Isso não terá efeito a menos que a torre de " +"preparo esteja ativa." msgid "Maximal bridging distance" msgstr "Distância máxima de ponte" msgid "Maximal distance between supports on sparse infill sections." -msgstr "Distância máxima entre suportes em seções de preenchimento não sólido." +msgstr "Distância máxima entre suportes em seções de preenchimento esparso." + +msgid "Wipe tower purge lines spacing" +msgstr "Espaçamento das linhas de purga da torre de limpeza" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Espaçamento das linhas de purga na torre de limpeza." + +msgid "Extra flow for purging" +msgstr "Fluxo extra para purga" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Fluxo extra usado para as linhas de purga na torre de limpeza. Isso torna as " +"linhas de purga mais grossas ou mais estreitas do que normalmente seriam. O " +"espaçamento é ajustado automaticamente." + +msgid "Idle temperature" +msgstr "Temperatura ociosa" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Temperatura do bico quando a ferramenta não está sendo usada em " +"configurações de multiferramentas. Isso é usado apenas quando 'Prevenção de " +"vazamento' está ativo em Definições de Impressão. Defina como 0 para " +"desabilitar." msgid "X-Y hole compensation" -msgstr "Compensação XY de furos" +msgstr "Compensação de furos XY" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"Os furos do objeto serão aumentados ou reduzidos no plano XY pelo valor " -"configurado. Valor positivo aumenta os furos. Valor negativo reduz os furos. " -"Essa função é usada para ajustar ligeiramente o tamanho quando o objeto tem " -"problema de montagem" +"Os furos nos objetos irão expandir ou contrair no plano XY pelo valor " +"definido. Valores positivos aumentam os furos, valores negativos reduzem os " +"furos. Essa função é usada para ajustar ligeiramente os tamanhos quando os " +"objetos têm problemas de montagem." msgid "X-Y contour compensation" -msgstr "Compensação XY de contornos" +msgstr "Compensação de contornos XY" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"O contorno do objeto será expandido ou reduzido no plano XY pelo valor " -"configurado. Valor positivo aumenta o contorno. Valor negativo diminui o " -"contorno. Essa função é usada para ajustar ligeiramente o tamanho quando o " -"objeto tem problemas de montagem" +"Os contornos dos objetos irão expandir ou contrair no plano XY pelo valor " +"definido. Valores positivos aumentam os contornos, valores negativos reduzem " +"os contornos. Essa função é usada para ajustar ligeiramente os tamanhos " +"quando os objetos têm problemas de montagem." msgid "Convert holes to polyholes" msgstr "Converter furos em polifuros" @@ -13946,7 +17508,7 @@ msgstr "Margem de detecção de polifuros" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13960,7 +17522,7 @@ msgid "Polyhole twist" msgstr "Torção de polifuros" msgid "Rotate the polyhole every layer." -msgstr "Girar o polifuro a cada camada." +msgstr "Rotacionar o polifuro a cada camada." msgid "G-code thumbnails" msgstr "Miniaturas de G-code" @@ -13977,55 +17539,52 @@ msgstr "Formato das miniaturas de G-code" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" -"Formato das miniaturas de G-code: PNG para melhor qualidade, JPG para menor " -"tamanho, QOI para firmware de baixa memória" +"Formato das miniaturas de G-code: PNG para a melhor qualidade, JPG para o " +"menor tamanho, QOI para firmwares de pouca memória." msgid "Use relative E distances" msgstr "Usar distâncias E relativas" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "A extrusão relativa é recomendada ao usar a opção \"label_objects\". Algumas " "extrusoras funcionam melhor com esta opção desmarcada (modo de extrusão " -"absoluta). A Torre Prime é compatível apenas com o modo relativo. É " -"recomendado na maioria das impressoras. O padrão é ativado" +"absoluta). A torre de limpeza é compatível apenas com o modo relativo. É " +"recomendado na maioria das impressoras. O padrão é ativado." msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" -"O gerador de perímetro clássico produz paredes com largura de extrusão " +"O gerador de parede clássico produz paredes com largura de extrusão " "constante e para áreas muito finas é usado preenchimento de vão. O motor " -"Arachne produz perímetros com largura de extrusão variável" - -msgid "Classic" -msgstr "Clássico" +"Arachne produz paredes com largura de extrusão variável." msgid "Arachne" msgstr "Arachne" msgid "Wall transition length" -msgstr "Comprimento da transição de perímetro" +msgstr "Comprimento da transição de parede" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Ao fazer a transição entre diferentes números de paredes à medida que a peça " "fica mais fina, uma certa quantidade de espaço é designada para dividir ou " -"unir os segmentos do perímetro. É expresso como uma porcentagem sobre o " -"diâmetro do bico" +"unir os segmentos da parede. É expresso como uma porcentagem sobre o " +"diâmetro do bico." msgid "Wall transitioning filter margin" -msgstr "Margem de filtro de transição de perímetro" +msgstr "Margem de filtro de transição de parede" msgid "" "Prevent transitioning back and forth between one extra wall and one less. " @@ -14034,115 +17593,114 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Evita a transição de ida e volta entre um perímetro extra e um a menos. Esta " +"Evita a transição de ida e volta entre uma parede extra e uma a menos. Esta " "margem amplia o intervalo de larguras de extrusão que seguem para [Largura " -"mínima da perímetro - margem, 2 * Largura mínima da perímetro + margem]. " -"Aumentar esta margem reduz o número de transições, o que reduz o número de " -"inícios / paradas de extrusão e o tempo de deslocamento. No entanto, uma " -"grande variação na largura de extrusão pode levar a problemas de subextrusão " -"ou superextrusão. É expresso como uma porcentagem sobre o diâmetro do bico" +"mínima da parede - margem, 2 * Largura mínima da parede + margem]. Aumentar " +"esta margem reduz o número de transições, o que reduz o número de inícios / " +"paradas de extrusão e o tempo de deslocamento. No entanto, uma grande " +"variação na largura de extrusão pode levar a problemas de subextrusão ou " +"superextrusão. É expresso como uma porcentagem sobre o diâmetro do bico." msgid "Wall transitioning threshold angle" -msgstr "Ângulo de limite de transição de perímetro" +msgstr "Ângulo limiar de transição de parede" msgid "" "When to create transitions between even and odd numbers of walls. A wedge " "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Quando criar transições entre números pares e ímpares de paredes. Uma forma " "de cunha com um ângulo maior do que esta configuração não terá transições e " -"nenhumo perímetro será impresso no centro para preencher o espaço restante. " +"nenhuma parede será impressa no centro para preencher o espaço restante. " "Reduzir esta configuração reduz o número e o comprimento dessas paredes " -"centrais, mas pode deixar vazios ou extrusão excessiva" +"centrais, mas pode deixar vazios ou extrusão excessiva." msgid "Wall distribution count" -msgstr "Contagem de distribuição de perímetro" +msgstr "Contagem de distribuição de paredes" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "O número de paredes, contadas a partir do centro, sobre as quais a variação " "precisa ser espalhada. Valores menores significam que as paredes externas " -"não mudam de largura" +"não mudam de largura." msgid "Minimum feature size" msgstr "Tamanho mínimo do elemento" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Espessura mínima de elementos finos. Elementos do modelo que são mais finos " -"do que este valor não serão impressos, enquanto elementos mais espessos que " -"o tamanho mínimo do elemento serão alargados até a largura mínima do " -"perímetro. É expresso como uma porcentagem sobre o diâmetro do bico" +"Espessura mínima de elementos finos. Elementos do modelo mais finos que esse " +"valor não serão impressos, enquanto elementos mais espessos que esse valor " +"serão alargados até a largura mínima da parede. É expresso como uma " +"porcentagem sobre o diâmetro do bico." msgid "Minimum wall length" -msgstr "Comprimento mínimo do perímetro" +msgstr "Comprimento mínimo da parede" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" -"Ajuste este valor para evitar que perímetros curtos e não fechados sejam " +"Ajuste este valor para evitar que paredes curtas e não fechados sejam " "impressos, o que poderia aumentar o tempo de impressão. Valores mais altos " -"removem perímetros mais longos.\n" +"removem paredes mais longas.\n" "\n" "NOTA: As superfícies inferior e superior não serão afetadas por este valor " -"para evitar lacunas visuais no exterior do modelo. Ajuste o 'Limiar de um " -"perímetro' nas configurações avançadas abaixo para ajustar a sensibilidade " -"do que é considerado uma superfície superior. 'Limiar de um perímetro' só é " +"para evitar lacunas visuais no exterior do modelo. Ajuste o 'Limiar de uma " +"parede' nas configurações avançadas abaixo para ajustar a sensibilidade do " +"que é considerado uma superfície superior. 'Limiar de uma parede' só é " "visível se esta configuração estiver acima do valor padrão de 0,5, ou se " "superfícies superiores de uma única parede estiverem habilitadas." msgid "First layer minimum wall width" -msgstr "Largura mínima do perímetro da primeira camada" +msgstr "Largura mínima de parede da primeira camada" msgid "" "The minimum wall width that should be used for the first layer is " "recommended to be set to the same size as the nozzle. This adjustment is " "expected to enhance adhesion." msgstr "" -"A largura mínima do perímetro que deve ser usada para a primeira camada é " +"A largura mínima de parede que deve ser usada para a primeira camada é " "recomendada para ser definida com o mesmo tamanho do bico. Este ajuste é " "esperado para melhorar a aderência." msgid "Minimum wall width" -msgstr "Largura mínima do perímetro" +msgstr "Largura mínima de parede" msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" -"Largura do perímetro que substituirá elementos finos (de acordo com o " -"tamanho mínimo do elemento) do modelo. Se a Largura mínima do perímetro for " -"mais fina do que a espessura do elemento, o perímetro será tão espesso " -"quanto o próprio elemento. É expresso como uma porcentagem sobre o diâmetro " -"do bico" +"Largura da parede que substituirá elementos finos (de acordo com o tamanho " +"mínimo do elemento) do modelo. Se a Largura mínima da parede for mais fina " +"do que a espessura do elemento, a parede será tão espesso quanto o próprio " +"elemento. É expresso como uma porcentagem sobre o diâmetro do bico." msgid "Detect narrow internal solid infill" msgstr "Detectar preenchimento sólido interno estreito" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Esta opção irá detectar automaticamente áreas de preenchimento sólido " "interno estreito. Se ativada, o padrão concêntrico será usado para a área " @@ -14161,28 +17719,150 @@ msgstr "largura de linha muito grande " msgid " not in range " msgstr " fora do intervalo " +msgid "Export 3MF" +msgstr "Exportar 3MF" + +msgid "Export project as 3MF." +msgstr "Exportar projeto como 3MF." + +msgid "Export slicing data" +msgstr "Exportar dados de fatiamento" + +msgid "Export slicing data to a folder." +msgstr "Exportar dados de fatiamento para uma pasta." + +msgid "Load slicing data" +msgstr "Carregar dados de fatiamento" + +msgid "Load cached slicing data from directory." +msgstr "Carregar dados de fatiamento em cache do diretório." + +msgid "Export STL" +msgstr "Exportar STL" + +msgid "Export the objects as single STL." +msgstr "Exporte os objetos como STL único." + +msgid "Export multiple STLs" +msgstr "Exportar vários STLs" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Exportar os objetos como vários STLs para o diretório." + +msgid "Slice" +msgstr "Fatiar" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Fatiar as placas: 0-todas as placas, i-placa i, outros-inválido" + +msgid "Show command help." +msgstr "Mostra ajuda do comando." + +msgid "UpToDate" +msgstr "Atualizar" + +msgid "Update the config values of 3MF to latest." +msgstr "Atualize os valores de configuração do 3MF para os mais recentes." + +msgid "downward machines check" +msgstr "verificação descendente de máquinas" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"verifica se a máquina atual é retrocompatível com as máquinas na lista." + +msgid "Load default filaments" +msgstr "Carregar filamento padrão" + +msgid "Load first filament as default for those not loaded." +msgstr "Carregar o primeiro filamento como padrão para aqueles não carregados." + msgid "Minimum save" msgstr "Salvar mínimo" -msgid "export 3mf with minimum size." -msgstr "exportar 3mf com tamanho mínimo." +msgid "Export 3MF with minimum size." +msgstr "Exportar 3MF com tamanho mínimo." + +msgid "mtcpp" +msgstr "" + +msgid "max triangle count per plate for slicing." +msgstr "contagem máxima de triângulos por placa para fatiar." + +msgid "mstpp" +msgstr "" + +msgid "max slicing time per plate in seconds." +msgstr "tempo máximo de fatiamento por placa em segundos." msgid "No check" msgstr "Sem verificação" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Não execute nenhuma verificação de validade, como a verificação de conflitos " -"de caminho do gcode." +"de caminho do G-code." + +msgid "Normative check" +msgstr "Verificação normativa" + +msgid "Check the normative items." +msgstr "Verificar os itens normativos." + +msgid "Output Model Info" +msgstr "Emitir Informações do Modelo" + +msgid "Output the model's information." +msgstr "Emitir as informações do modelo." + +msgid "Export Settings" +msgstr "Exportar Configurações" + +msgid "Export settings to a file." +msgstr "Exportar configurações para um arquivo." + +msgid "Send progress to pipe" +msgstr "Enviar o progresso para a fila" + +msgid "Send progress to pipe." +msgstr "Enviar o progresso para a fila." + +msgid "Arrange Options" +msgstr "Opções de Arranjo" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Opções de arranjo: 0-desativar, 1-ativar, outros-automático" + +msgid "Repetition count" +msgstr "Contagem de repetições" + +msgid "Repetition count of the whole model." +msgstr "Contagem de repetições do modelo inteiro." msgid "Ensure on bed" msgstr "Garantir na mesa" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Eleve o objeto acima da mesa quando estiver parcialmente abaixo. Desativado " -"por padrão" +"por padrão." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Organize os modelos fornecidos em uma placa e junte-os em um único modelo, a " +"fim de executar ações uma só vez." + +msgid "Convert Unit" +msgstr "Converter Unidades" + +msgid "Convert the units of model." +msgstr "Converter unidades do modelo." msgid "Orient Options" msgstr "Opções de Orientação" @@ -14193,12 +17873,89 @@ msgstr "Opções de orientação: 0-desativar, 1-habilitar, outros-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Ângulo de rotação ao redor do eixo Z em graus." +msgid "Rotate around X" +msgstr "Rotacionar ao redor de X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Ângulo de rotação ao redor do eixo X em graus." + msgid "Rotate around Y" -msgstr "Girar ao redor de Y" +msgstr "Rotacionar ao redor de Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Ângulo de rotação ao redor do eixo Y em graus." +msgid "Scale the model by a float factor." +msgstr "Escalar o modelo por um fator decimal." + +msgid "Load General Settings" +msgstr "Carregar Configurações Gerais" + +msgid "Load process/machine settings from the specified file." +msgstr "Carregar configurações de processo/máquina do arquivo especificado." + +msgid "Load Filament Settings" +msgstr "Carregar Configurações de Filamento" + +msgid "Load filament settings from the specified file list." +msgstr "Carregar configurações de filamento da lista de arquivos especificada." + +msgid "Skip Objects" +msgstr "Pular objetos" + +msgid "Skip some objects in this print." +msgstr "Pule alguns objetos nesta impressão." + +msgid "Clone Objects" +msgstr "Clonar Objetos" + +msgid "Clone objects in the load list." +msgstr "Clonar objetos na lista de carregamento." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" +"Carregar configurações de processo/máquina atualizadas ao usar Atualizar" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Carregar configurações de processo/máquina atualizadas do arquivo " +"especificado ao usar Atualizar." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "Carregar configurações de filamento atualizadas ao usar Atualizar" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Carregar configurações de filamento atualizadas do arquivo especificado ao " +"usar Atualizar." + +msgid "Downward machines check" +msgstr "Verificação descendente de máquinas" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Se habilitado, verifica se a máquina atual é retrocompatível com as máquinas " +"na lista." + +msgid "downward machines settings" +msgstr "configurações de máquinas descendentes" + +msgid "The machine settings list needs to do downward checking." +msgstr "" +"A lista de configurações de máquina precisa fazer uma verificação " +"descendente." + +msgid "Load assemble list" +msgstr "Carregar lista de montagem" + +msgid "Load assemble object list from config file." +msgstr "Carregar lista de objetos de montagem do arquivo de configuração." + msgid "Data directory" msgstr "Diretório de dados" @@ -14211,41 +17968,139 @@ msgstr "" "manter diferentes perfis ou incluir configurações de um armazenamento em " "rede." -msgid "Load custom gcode" -msgstr "Carregar gcode personalizado" +msgid "Output directory" +msgstr "Diretório de saída" -msgid "Load custom gcode from json" -msgstr "Carregar gcode personalizado do json" +msgid "Output directory for the exported files." +msgstr "Diretório de saída para os arquivos exportados." -msgid "Current z-hop" +msgid "Debug level" +msgstr "Nível de depuração" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Define o nível do log de depuração. 0:fatal, 1:error, 2:warning, 3:info, 4:" +"debug, 5:trace\n" + +msgid "Enable timelapse for print" +msgstr "Habilitar timelapse para impressão" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Se habilitado, esse fatiamento será considerado usando timelapse." + +msgid "Load custom G-code" +msgstr "Carregar G-code personalizado" + +msgid "Load custom G-code from json." +msgstr "Carregar G-code personalizado do json." + +msgid "Load filament IDs" +msgstr "Carregar IDs de filamentos" + +msgid "Load filament IDs for each object." +msgstr "Carregar IDs de filamentos para cada objeto." + +msgid "Allow multiple colors on one plate" +msgstr "Permitir várias cores em uma placa" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "Se habilitado, o arranjo permitirá várias cores em uma placa." + +msgid "Allow rotation when arranging" +msgstr "Permitir rotações ao arranjar" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "Se habilitado, o arranjo permitirá rotações ao posicionar objetos." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Evitar a região de calibração de extrusão ao arranjar" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Se habilitado, o arranjo evitará a calibração da região de extrusão ao " +"posicionar objetos." + +msgid "Skip modified G-code in 3MF" +msgstr "Pular G-code modificado em 3MF" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Pular o G-code modificado em 3MF das predefinições de impressora ou de " +"filamento." + +msgid "MakerLab name" +msgstr "Nome do MakerLab" + +msgid "MakerLab name to generate this 3MF." +msgstr "Nome do MakerLab para gerar este 3MF." + +msgid "MakerLab version" +msgstr "Versão do MakerLab" + +msgid "MakerLab version to generate this 3MF." +msgstr "Versão do MakerLab para gerar este 3MF." + +msgid "Metadata name list" +msgstr "Lista de nomes de metadados" + +msgid "Metadata name list added into 3MF." +msgstr "Lista de nomes de metadados adicionada ao 3MF." + +msgid "Metadata value list" +msgstr "Lista de valores de metadados" + +msgid "Metadata value list added into 3MF." +msgstr "Lista de valores de metadados adicionada ao 3MF." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Permitir que 3MF com versão mais recente seja fatiado" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "Permitir que 3MF com versão mais recente seja fatiado." + +msgid "Current Z-hop" msgstr "Z-hop atual" -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "Contém o z-hop presente no início do bloco de G-code personalizado." +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "Contém o Z-hop presente no início do bloco de G-code personalizado." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" -"Posição do extrusor no início do bloco de G-code personalizado. Se o G-code " +"Posição da extrusora no início do bloco de G-code personalizado. Se o G-code " "personalizado se deslocar para outro lugar, ele deve escrever nesta variável " -"para que o PrusaSlicer saiba de onde se desloca quando recupera o controle." +"para que o Snapmaker Orca saiba de onde se desloca quando recupera o controle." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Estado de retração no início do bloco de G-code personalizado. Se o G-code " -"personalizado mover o eixo do extrusor, ele deve escrever nesta variável " -"para que o PrusaSlicer desretraia corretamente quando recupera o controle." +"personalizado mover o eixo da extrusora, ele deve escrever nesta variável " +"para que o Snapmaker Orca desretraia corretamente quando recupera o controle." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Desretração extra" -msgid "Currently planned extra extruder priming after deretraction." -msgstr "Priming de extrusora extra planejado atualmente após a desretração." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "Preparação extra de extrusora planejado atualmente após a desretração." + +msgid "Absolute E position" +msgstr "Posição E absoluta" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Posição atual do eixo da extrusora. Usado somente com endereçamento absoluto " +"da extrusora." msgid "Current extruder" msgstr "Extrusora atual" @@ -14264,10 +18119,10 @@ msgstr "" "impresso." msgid "Has wipe tower" -msgstr "Tem Torre Prime" +msgstr "Tem torre de limpeza" msgid "Whether or not wipe tower is being generated in the print." -msgstr "Se a Torre Prime está sendo gerada ou não na impressão." +msgstr "Se a torre de limpeza está sendo gerada ou não na impressão." msgid "Initial extruder" msgstr "Extrusora inicial" @@ -14277,7 +18132,7 @@ msgid "" "initial_tool." msgstr "" "Índice base zero da primeira extrusora utilizada na impressão. Mesmo que " -"ferramenta_inicial." +"initial_tool." msgid "Initial tool" msgstr "Ferramenta inicial" @@ -14287,15 +18142,23 @@ msgid "" "initial_extruder." msgstr "" "Índice base zero da primeira extrusora utilizada na impressão. Mesmo que " -"extrusora_inicial." +"initial_extruder." msgid "Is extruder used?" -msgstr "Extrusora utilizada?" +msgstr "Extrusora é utilizada?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Vetor de booleanos indicando se uma dada extrusora é utilizada na impressão." +msgid "Has single extruder MM priming" +msgstr "Tem preparação de extrusora MM única" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"As regiões de preparação multimateriais extras são usadas nesta impressão?" + msgid "Volume per extruder" msgstr "Volume por extrusora" @@ -14303,10 +18166,10 @@ msgid "Total filament volume extruded per extruder during the entire print." msgstr "" "Volume total de filamento extrudado por extrusora durante toda a impressão." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Total de trocas de ferramenta" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Número de trocas de ferramenta durante a impressão." msgid "Total volume" @@ -14322,8 +18185,8 @@ msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." msgstr "" -"Peso por extrusora extrudido durante toda a impressão. Calculado a partir do " -"valor de densidade do filamento nas configurações de filamento." +"Peso extrudado por extrusora durante toda a impressão. Calculado a partir do " +"valor de filament_density nas Configurações de Filamento." msgid "Total weight" msgstr "Peso total" @@ -14332,8 +18195,8 @@ msgid "" "Total weight of the print. Calculated from filament_density value in " "Filament Settings." msgstr "" -"Peso total da impressão. Calculado a partir do valor de densidade do " -"filamento nas configurações de filamento." +"Peso total da impressão. Calculado a partir do valor de filament_density nas " +"Configurações de Filamento." msgid "Total layer count" msgstr "Total de camadas" @@ -14362,12 +18225,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Contém uma frase com informações sobre qual escala foi aplicada aos objetos " "individuais. A indexação dos objetos é baseada em zero (o primeiro objeto " "tem índice 0).\n" -"Exemplo: 'x:100% y:50% z:100'." +"Exemplo: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Nome do arquivo de entrada sem extensão" @@ -14376,15 +18239,15 @@ msgid "Source filename of the first object, without extension." msgstr "Nome do arquivo de origem do primeiro objeto, sem extensão." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" -"O vetor possui dois elementos: coordenada x e y do ponto. Valores em mm." +"O vetor possui dois elementos: coordenada X e Y do ponto. Valores em mm." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" -"O vetor tem dois elementos: dimensão x e y da caixa delimitadora. Valores em " +"O vetor tem dois elementos: dimensão X e Y da caixa delimitadora. Valores em " "mm." msgid "First layer convex hull" @@ -14430,34 +18293,47 @@ msgstr "Hora" msgid "Minute" msgstr "Minuto" +msgid "Second" +msgstr "Segundo" + msgid "Print preset name" -msgstr "Nome do perfil de impressão" +msgstr "Nome da predefinição de impressão" msgid "Name of the print preset used for slicing." -msgstr "Nome do perfil de impressão usado para fatiar." +msgstr "Nome da predefinição de impressão usado para fatiar." msgid "Filament preset name" -msgstr "Nome do perfil de filamento" +msgstr "Nome da predefinição de filamento" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Nomes dos perfis de filamento usados para fatiar. A variável é um vetor " -"contendo um nome para cada extrusora." +"Nomes das predefinições de filamento usadas para fatiar. A variável é um " +"vetor contendo um nome para cada extrusora." msgid "Printer preset name" -msgstr "Nome do perfil de impressora" +msgstr "Nome da predefinição de impressora" msgid "Name of the printer preset used for slicing." -msgstr "Nome do perfil de impressora usado para fatiar." +msgstr "Nome da predefinição de impressora usado para fatiar." msgid "Physical printer name" -msgstr "Nome da impressora física" +msgstr "Nome da predefinição física" msgid "Name of the physical printer used for slicing." msgstr "Nome da impressora física utilizada para fatiar." +msgid "Number of extruders" +msgstr "Número de extrusoras" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Número total de extrusoras, independentemente de serem usadas na impressão " +"atual." + msgid "Layer number" msgstr "Número da camada" @@ -14466,8 +18342,8 @@ msgstr "" "Índice da camada atual. Baseado em um (ou seja, a primeira camada é o número " "1)." -msgid "Layer z" -msgstr "Camada z" +msgid "Layer Z" +msgstr "Camada Z" msgid "" "Height of the current layer above the print bed, measured to the top of the " @@ -14476,23 +18352,23 @@ msgstr "" "Altura da camada atual acima da mesa de impressão, medida até o topo da " "camada." -msgid "Maximal layer z" -msgstr "Altura máxima da camada z" +msgid "Maximal layer Z" +msgstr "Altura máxima da camada Z" msgid "Height of the last layer above the print bed." msgstr "Altura da última camada acima da mesa de impressão." msgid "Filament extruder ID" -msgstr "ID do extrusor de filamento" +msgstr "ID da extrusora de filamento" msgid "The current extruder ID. The same as current_extruder." -msgstr "O ID do extrusor atual. O mesmo que extrusora_atual." +msgstr "O ID da extrusora atual. O mesmo que current_extruder." msgid "Error in zip archive" msgstr "Erro no arquivo zip" msgid "Generating walls" -msgstr "Gerando perímetros" +msgstr "Gerando paredes" msgid "Generating infill regions" msgstr "Gerando regiões de preenchimento" @@ -14501,10 +18377,7 @@ msgid "Generating infill toolpath" msgstr "Gerando caminho da ferramenta de preenchimento" msgid "Detect overhangs for auto-lift" -msgstr "Detectar overhangs para levantamento automático" - -msgid "Generating support" -msgstr "Gerando suporte" +msgstr "Detectar saliências para levantamento automático" msgid "Checking support necessity" msgstr "Verificando necessidade de suporte" @@ -14516,7 +18389,7 @@ msgid "floating cantilever" msgstr "balanço flutuante" msgid "large overhangs" -msgstr "overhangs grandes" +msgstr "saliências grandes" #, c-format, boost-format msgid "" @@ -14526,6 +18399,9 @@ msgstr "" "Parece que o objeto %s tem %s. Por favor, reoriente o objeto ou habilite a " "geração de suporte." +msgid "Generating support" +msgstr "Gerando suporte" + msgid "Optimizing toolpath" msgstr "Otimizando caminho da ferramenta" @@ -14542,63 +18418,48 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "A compensação de tamanho XY de um objeto não será usada porque ele também " "está pintado com cor.\n" "A compensação de tamanho XY não pode ser combinada com pintura colorida." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Suporte: gerar caminho da ferramenta na camada %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Um objeto habilitou a compensação de tamanho XY, que não será usada porque " +"também tem uma pintura de textura difusa.\n" +"A compensação de tamanho XY não pode ser combinada com a pintura de textura " +"difusa." -msgid "Support: detect overhangs" -msgstr "Suporte: detectar overhangs" +msgid "Object name" +msgstr "Nome do objeto" msgid "Support: generate contact points" msgstr "Suporte: gerar pontos de contato" -msgid "Support: propagate branches" -msgstr "Suporte: propagar ramificações" +msgid "Loading of a model file failed." +msgstr "Falha ao carregar um arquivo de modelo." -msgid "Support: draw polygons" -msgstr "Suporte: desenhar polígonos" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Suporte: gerar caminho da ferramenta" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Suporte: gerar polígonos na camada %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Suporte: corrigir buracos na camada %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Suporte: propagar ramificações na camada %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter extensão ." -"stl, .obj, .amf(.xml)." - -msgid "Loading of a model file failed." -msgstr "Falha ao carregar um arquivo de modelo." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "O arquivo fornecido não pôde ser lido porque está vazio" +"Formato de arquivo desconhecido. O arquivo de entrada deve ter extensão " +".stl, .obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Formato de arquivo desconhecido. O arquivo de entrada deve ter extensão .3mf " "ou .zip.amf." -msgid "Canceled" -msgstr "Cancelado" - msgid "load_obj: failed to parse" msgstr "load_obj: falha ao analisar" @@ -14690,29 +18551,37 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" -"Por favor, insira valores válidos:\n" -"Valor de início: >= %.1f\n" -"Valor de término: <= %.1f\n" -"Valor de término: > Valor de início\n" -"Passo de valor: >= %.3f)" +"Por favor insira valores válidos:\n" +"Valor inicial: >= %.1f\n" +"Valor final: <= %.1f\n" +"Valor final: > Valor inicial\n" +"Incremeto de valor: >= %.3f" msgid "The name cannot be empty." msgstr "O nome não pode estar vazio." #, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "O preset selecionado: %s não foi encontrado." +msgid "The selected preset: %s was not found." +msgstr "A predefinição selecionada: %s não foi encontrada." msgid "The name cannot be the same as the system preset name." -msgstr "O nome não pode ser o mesmo que o nome do preset do sistema." +msgstr "O nome não pode ser o mesmo que o nome da predefinição do sistema." msgid "The name is the same as another existing preset name" -msgstr "O nome é o mesmo que outro nome de preset existente" +msgstr "O nome é o mesmo que outro nome de predefinição existente" msgid "create new preset failed." -msgstr "falha ao criar novo preset." +msgstr "falha ao criar nova predefinição." + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" msgid "" "Are you sure to cancel the current calibration and return to the home page?" @@ -14736,22 +18605,21 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Esse tipo de máquina só pode manter 16 resultados por bico no histórico. " "Você pode deletar resultados existentes e então começar a calibração. Ou " -"você pode continuar, mas não poderá criar novos resultados. \n" +"você pode continuar, mas não poderá criar novos resultados.\n" "Você ainda quer continuar com a calibração?" -msgid "Connecting to printer..." -msgstr "Conectando à impressora..." - -msgid "The failed test result has been dropped." -msgstr "O resultado do teste falhado foi descartado." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "O resultado da Calibração de Dinâmica de Fluxo foi salvo na impressora" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" +"Apenas um dos resultados com o mesmo nome: %s será salvo. Tem certeza que " +"deseja sobrescrever os outros resultados?" #, c-format, boost-format msgid "" @@ -14763,6 +18631,16 @@ msgstr "" "um dos resultados com o mesmo nome é salvo. Tem certeza que deseja " "sobrescrever o resultado histórico?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" +"Dentro da mesma extrusora, o nome (%s) deve ser único quando o tipo de " +"filamento, o diâmetro do bico e o fluxo do bico forem os mesmos.\n" +"Tem certeza de que deseja sobrescrever o resultado histórico?" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14771,18 +18649,29 @@ msgstr "" "Este tipo de máquina só pode salvar %d resultados por bico. Este resultado " "não será salvo." +msgid "Connecting to printer..." +msgstr "Conectando à impressora…" + +msgid "The failed test result has been dropped." +msgstr "O resultado do teste falhado foi descartado." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "" +"O resultado da Calibração de Dinâmica de Fluxo foi salvo na impressora." + msgid "Internal Error" msgstr "Erro Interno" msgid "Please select at least one filament for calibration" msgstr "Por favor, selecione pelo menos um filamento para calibrar" -msgid "Flow rate calibration result has been saved to preset" -msgstr "O resultado da calibração de fluxo foi salvo no preset" +msgid "Flow rate calibration result has been saved to preset." +msgstr "O resultado da calibração de fluxo foi salva na predefinição." -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" -"O resultado da calibração de fluxo volumétrico máximo foi salvo no preset" +"O resultado da calibração de fluxo volumétrico máximo foi salvo na " +"predefinição." msgid "When do you need Flow Dynamics Calibration" msgstr "Quando você precisa da Calibração de Dinâmica de Fluxo" @@ -14793,16 +18682,16 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Adicionamos agora a auto-calibração para diferentes filamentos, que é " +"Agora adicionamos a auto-calibração para diferentes filamentos, que é " "totalmente automatizada e o resultado será salvo na impressora para uso " "futuro. Você só precisa fazer a calibração nos seguintes casos limitados:\n" "1. Se você introduzir um novo filamento de marcas/modelos diferentes ou se o " "filamento estiver úmido;\n" -"2. se o bico estiver desgastado ou substituído por um novo;\n" +"2. Se o bico estiver desgastado ou for substituído por um novo;\n" "3. Se o fluxo volumétrico máximo ou a temperatura de impressão forem " "alteradas na configuração do filamento." @@ -14828,6 +18717,25 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"Encontre os detalhes da Calibração de Dinâmica de Fluxo em nosso wiki.\n" +"\n" +"Normalmente, a calibração é desnecessária. Quando você inicia uma impressão " +"de cor/material único, com a opção \"calibração de dinâmica de fluxo\" " +"marcada no menu de início de impressão, a impressora seguirá o método " +"antigo, calibrando o filamento antes da impressão; Quando você inicia uma " +"impressão de várias cores/materiais, a impressora usará o parâmetro de " +"compensação padrão para o filamento durante cada troca de filamento, o que " +"terá um bom resultado na maioria dos casos.\n" +"\n" +"Observe que há alguns casos que podem tornar os resultados da calibração não " +"confiáveis, como adesão insuficiente na placa de impressão. A melhoria da " +"adesão pode ser obtida lavando a placa de impressão ou aplicando cola. Para " +"obter mais informações sobre este tópico, consulte nosso Wiki.\n" +"\n" +"Os resultados da calibração têm cerca de 10 por cento de jitter em nosso " +"teste, o que pode fazer com que o resultado não seja exatamente o mesmo em " +"cada calibração. Ainda estamos investigando a causa raiz para fazer " +"melhorias com novas atualizações." msgid "When to use Flow Rate Calibration" msgstr "Quando usar a Calibração de Fluxo" @@ -14836,24 +18744,24 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Depois de usar a Calibração de Dinâmica de Fluxo, ainda pode haver alguns " "problemas de extrusão, como:\n" "1. Superextrusão: excesso de material no objeto impresso, formando grumos ou " "espinhas, ou as camadas parecem mais espessas do que o esperado e não " -"uniformes.\n" +"uniformes\n" "2. Subextrusão: camadas muito finas, resistência fraca do preenchimento ou " -"vazios na camada superior do modelo, mesmo ao imprimir lentamente.\n" +"vazios na camada superior do modelo, mesmo ao imprimir lentamente\n" "3. Baixa Qualidade de Superfície: a superfície de suas impressões parece " -"áspera ou irregular.\n" +"áspera ou irregular\n" "4. Integridade Estrutural Fraca: as impressões quebram facilmente ou não " -"parecem tão robustas quanto deveriam." +"parecem tão robustas quanto deveriam" msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -14927,7 +18835,7 @@ msgstr "" "imprime com:" msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "material com significativa contração/expansão térmica, como..." +msgstr "material com significativa contração/expansão térmica, como…" msgid "materials with inaccurate filament diameter" msgstr "materiais com diâmetro de filamento impreciso" @@ -14939,7 +18847,7 @@ msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." msgstr "" -"Parte da calibração falhou! Você pode limpar a mesa e tentar novamente. O " +"Parte da calibração falhou! Você pode limpar a placa e tentar novamente. O " "resultado do teste falho será descartado." msgid "" @@ -14949,34 +18857,23 @@ msgstr "" "*Recomendamos que você adicione marca, material, tipo e até mesmo nível de " "umidade no nome" -msgid "Failed" -msgstr "Falhou" - msgid "Please enter the name you want to save to printer." msgstr "Por favor, insira o nome que você deseja salvar na impressora." msgid "The name cannot exceed 40 characters." msgstr "O nome não pode ter mais de 40 caracteres." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" - msgid "Please find the best line on your plate" -msgstr "Por favor, encontre a melhor linha em sua mesa" +msgstr "Por favor, encontre a melhor linha em sua placa" msgid "Please find the corner with perfect degree of extrusion" -msgstr "" +msgstr "Por favor, encontre o canto com grau perfeito de extrusão" msgid "Input Value" msgstr "Valor de entrada" msgid "Save to Filament Preset" -msgstr "Salvar no Preset de Filamento" - -msgid "Preset" -msgstr "Preset" +msgstr "Salvar na Predefinição de Filamento" msgid "Record Factor" msgstr "Registrar Fator" @@ -14988,10 +18885,10 @@ msgid "Flow Ratio" msgstr "Fluxo" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "Por favor, insira um valor válido (0.0 < fluxo < 2.0)" +msgstr "Por favor insira um valor válido (0.0 < fluxo < 2.0)" msgid "Please enter the name of the preset you want to save." -msgstr "Por favor, insira o nome do preset que você deseja salvar." +msgstr "Por favor insira o nome da predefinição que você deseja salvar." msgid "Calibration1" msgstr "Calibração1" @@ -15000,7 +18897,7 @@ msgid "Calibration2" msgstr "Calibração2" msgid "Please find the best object on your plate" -msgstr "Por favor, encontre o melhor objeto em sua mesa" +msgstr "Por favor, encontre o melhor objeto em sua placa" msgid "Fill in the value above the block with smoothest top surface" msgstr "Preencha o valor acima do bloco com a superfície superior mais lisa" @@ -15012,15 +18909,12 @@ msgstr "Pular Calibração2" msgid "flow ratio : %s " msgstr "fluxo: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Por favor, escolha um bloco com a superfície superior mais lisa" - msgid "Please choose a block with smoothest top surface." -msgstr "Por favor, escolha um bloco com a superfície superior mais lisa." +msgstr "Por favor escolha um bloco com a superfície superior mais lisa." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "" -"Por favor, insira um valor válido (0 <= Velocidade Volumétrica Máxima <= 60)" +"Por favor insira um valor válido (0 <= Velocidade Volumétrica Máxima <= 60)" msgid "Calibration Type" msgstr "Tipo de Calibração" @@ -15038,28 +18932,45 @@ msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"Um modelo de teste será impresso. Por favor, limpe a mesa e a coloque de " -"volta na mesa aquecida antes da calibração." +"Um modelo de teste será impresso. Por favor, limpe a placa de impressão e " +"coloque-a de volta na mesa aquecida antes da calibração." msgid "Printing Parameters" msgstr "Parâmetros de Impressão" +msgid "Synchronize nozzle and AMS information" +msgstr "Sincronizar informações de bico e AMS" + +msgid "Please connect the printer first before synchronizing." +msgstr "Conecte a impressora antes de sincronizar." + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" +"As informações do bico da impressora %s não foram configuradas. Configure-as " +"antes de prosseguir com a calibração." + +msgid "AMS and nozzle information are synced" +msgstr "Informações de AMS e bico estão sincronizadas" + +msgid "Nozzle Info" +msgstr "Informações de Bico" + msgid "Plate Type" -msgstr "Tipo de mesa" +msgstr "Tipo de Placa" msgid "filament position" msgstr "posição do filamento" -msgid "External Spool" -msgstr "Carretel Externo" - msgid "Filament For Calibration" msgstr "Filamento Para Calibração" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Dicas para material de calibração:\n" "- Materiais que podem compartilhar a mesma temperatura de mesa aquecida\n" @@ -15079,9 +18990,26 @@ msgstr "%s não é compatível com %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU não é suportado para Auto-Calibração de Dinâmica de Fluxo." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Não é possível imprimir juntos vários filamentos que têm grande diferença de " +"temperatura. Caso contrário, a extrusora e bico podem ficar bloqueados ou " +"danificados durante a impressão" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Conectando à impressora" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Do Valor k" @@ -15100,6 +19028,9 @@ msgstr "Da Velocidade Volumétrica" msgid "To Volumetric Speed" msgstr "Para a Velocidade Volumétrica" +msgid "Are you sure you want to cancel this print?" +msgstr "Tem certeza de que deseja cancelar esta impressão?" + msgid "Flow Dynamics Calibration Result" msgstr "Resultado da Calibração de Dinâmica de Fluxo" @@ -15125,6 +19056,16 @@ msgstr "Este tipo de máquina só pode salvar %d resultados por bico." msgid "Edit Flow Dynamics Calibration" msgstr "Editar Calibração de Dinâmica de Fluxo" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" +"Dentro da mesma extrusora, o nome '%s' deve ser único quando o tipo de " +"filamento, o diâmetro do bico e o fluxo do bico forem idênticos. Escolha " +"um nome diferente." + msgid "New Flow Dynamic Calibration" msgstr "Nova Calibração de Dinâmica de Fluxo" @@ -15134,6 +19075,12 @@ msgstr "Ok" msgid "The filament must be selected." msgstr "O filamento deve ser selecionado." +msgid "The extruder must be selected." +msgstr "A extrusora deve estar selecionada." + +msgid "The nozzle must be selected." +msgstr "O bico deve estar selecionado." + msgid "Network lookup" msgstr "Procura de Rede" @@ -15169,15 +19116,12 @@ msgstr "" msgid "PA Calibration" msgstr "Calibração de PA" +msgid "Extruder type" +msgstr "Tipo de extrusora" + msgid "DDE" msgstr "DDE" -msgid "Bowden" -msgstr "Tubo" - -msgid "Extruder type" -msgstr "Tipo de Extrusor" - msgid "PA Tower" msgstr "Torre de PA" @@ -15196,23 +19140,44 @@ msgstr "Finalizar PA: " msgid "PA step: " msgstr "Passo de PA: " +msgid "Accelerations: " +msgstr "Acelerações: " + +msgid "Speeds: " +msgstr "Velocidades: " + msgid "Print numbers" msgstr "Número de Impressões" +msgid "Comma-separated list of printing accelerations" +msgstr "Lista separada por vírgulas de acelerações de impressão" + +msgid "Comma-separated list of printing speeds" +msgstr "Lista separada por vírgulas de velocidades de impressão" + +msgid "Pressure Advance Guide" +msgstr "Guia de Avanço de Pressão" + +msgid "Adaptive Pressure Advance Guide" +msgstr "Guia de Avanço de Pressão Adaptativo" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" -"Por favor, insira valores válidos:\n" -"Iniciar PA: >= 0.0\n" -"Finalizar PA: > Iniciar PA\n" -"Passo de PA: >= 0.001)" +"Por favor insira valores válidos:\n" +"PA Inicial: >= 0.0\n" +"PA Final: > PA Inicial\n" +"Incremeto de PA: >= 0.001" msgid "Temperature calibration" msgstr "Calibração de Temperatura" +msgid "Filament type" +msgstr "Tipo de Filamento" + msgid "PLA" msgstr "PLA" @@ -15223,7 +19188,7 @@ msgid "PETG" msgstr "PETG" msgid "PCTG" -msgstr "" +msgstr "PCTG" msgid "TPU" msgstr "TPU" @@ -15234,9 +19199,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Tipo de Filamento" - msgid "Start temp: " msgstr "Temp. inicial: " @@ -15246,16 +19208,19 @@ msgstr "Temp. final: " msgid "Temp step: " msgstr "Passo de Temperatura: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "Guia Wiki: Calibração de Temperatura" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Por favor, insira valores válidos:\n" -"Temp. inicial: <= 350\n" -"Temp. final: >= 170\n" -"Temp. inicial > Temp. final + 5)" +"Por favor insira valores válidos:\n" +"Temp. Inicial: <= 350\n" +"Temp. Final: >= 170\n" +"Temp. Inicial: >= Temp. Final + 5" msgid "Max volumetric speed test" msgstr "Teste de Velocidade Volumétrica Máxima" @@ -15266,19 +19231,19 @@ msgstr "Iniciar Velocidade Volumétrica: " msgid "End volumetric speed: " msgstr "Finalizar Velocidade Volumétrica: " -msgid "step: " -msgstr "passo: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "Guia Wiki: Calibração de Velocidade Volumétrica" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" -"Por favor, insira valores válidos:\n" +"Por favor insira valores válidos:\n" "início > 0\n" "passo >= 0\n" -"fim > início + passo)" +"fim > início + passo" msgid "VFA test" msgstr "Teste VFA" @@ -15289,16 +19254,19 @@ msgstr "Velocidade Inicial: " msgid "End speed: " msgstr "Velocidade Final: " +msgid "Wiki Guide: VFA" +msgstr "Guia Wiki: VFA" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" -"Por favor, insira valores válidos:\n" +"Por favor insira valores válidos:\n" "início > 10\n" "passo >= 0\n" -"fim > início + passo)" +"fim > início + passo" msgid "Start retraction length: " msgstr "Distância de Retração Inicial: " @@ -15306,11 +19274,142 @@ msgstr "Distância de Retração Inicial: " msgid "End retraction length: " msgstr "Distância de Retração Final: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "Guia Wiki: Calibração de Retração" -msgid "Send G-Code to printer host" -msgstr "Enviar G-Code para o host da impressora" +msgid "Input shaping Frequency test" +msgstr "Teste de Frequência da modelagem de entrada" + +msgid "Test model" +msgstr "Modelo de teste" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "Torre Rápida" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "Frequência (Inicial / Final): " + +msgid "Start / End" +msgstr "Inicial / Final" + +msgid "Frequency settings" +msgstr "Configurações de frequência" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "O firmware RepRap usa a mesma faixa de frequência para ambos os eixos." + +msgid "Damp: " +msgstr "Amortecimento: " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" +"Recomendado: Defina o Amortecimento para 0.\n" +"Isso usará o valor padrão ou salvo da impressora." + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "Wiki Guide: Calibração da Modelagem de Entrada" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Por favor insira valores válidos:\n" +"(0 < FreqInicial < FreqFinal < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" +"Por favor insira um fator de amortecimento válido (0 < fator de " +"Amortecimento/zeta <= 1)" + +msgid "Input shaping Damp test" +msgstr "Teste de Amortecimento de modelagem de entrada" + +msgid "Frequency: " +msgstr "Frequência: " + +msgid "Frequency" +msgstr "Frequência" + +msgid "Damp" +msgstr "Amortecimento" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "O firmware RepRap usa a mesma frequência para ambos os eixos." + +msgid "Note: Use previously calculated frequencies." +msgstr "Nota: Use frequências previamente calculadas." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Por favor insira valores válidos:\n" +"(0 < Freq < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Por favor insira um fator de amortecimento válido (0 <= DampingStart < " +"DampingEnd <= 1)" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "Início: " + +msgid "End: " +msgstr "Final: " + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "NOTA: Valores altos podem causar deslocamento de camada (>%s)" + +msgid "Send G-code to printer host" +msgstr "Enviar G-code para o host da impressora" msgid "Upload to Printer Host with the following filename:" msgstr "Enviar para o Host da Impressora com o seguinte nome de arquivo:" @@ -15323,7 +19422,7 @@ msgid "Upload to storage" msgstr "Enviar para armazenamento" msgid "Switch to Device tab after upload." -msgstr "" +msgstr "Mude para a aba Dispositivo após o upload." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" @@ -15357,18 +19456,37 @@ msgstr "Cancelar selecionados" msgid "Show error message" msgstr "Mostrar mensagem de erro" -msgid "Enqueued" +msgid "Queued" msgstr "Enfileirado" msgid "Uploading" msgstr "Enviando" -msgid "Cancelling" +msgid "Canceling" msgstr "Cancelando" msgid "Error uploading to print host" msgstr "Erro ao enviar para o host de impressão" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"O tipo de placa selecionado não corresponde ao arquivo. Por favor, confirme " +"antes de iniciar a impressão." + +msgid "Time-lapse" +msgstr "Timelapse" + +msgid "Heated Bed Leveling" +msgstr "Nivelamento de Mesa Aquecida" + +msgid "Textured Build Plate (Side A)" +msgstr "Placa de Impressão Texturizada (Lado A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Placa de Impressão Lisa (Lado B)" + msgid "Unable to perform boolean operation on selected parts" msgstr "Não é possível realizar operação booleana nas peças selecionadas" @@ -15429,14 +19547,14 @@ msgstr "Versão do Sistema:" msgid "DNS Server:" msgstr "Servidor DNS:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Testar Snapmaker Orca (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Testar Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Testar Bing.com" +msgid "Test bing.com" +msgstr "Testar bing.com" msgid "Test bing.com:" msgstr "Testar bing.com:" @@ -15445,7 +19563,7 @@ msgid "Log Info" msgstr "Informações do Registro" msgid "Select filament preset" -msgstr "Selecionar Preset de Filamento" +msgstr "Selecionar predefinição de filamento" msgid "Create Filament" msgstr "Criar Filamento" @@ -15454,16 +19572,16 @@ msgid "Create Based on Current Filament" msgstr "Criar com Base no Filamento Atual" msgid "Copy Current Filament Preset " -msgstr "Copiar Preset de Filamento Atual " +msgstr "Copiar Predefinição de Filamento Atual " msgid "Basic Information" msgstr "Informações Básicas" msgid "Add Filament Preset under this filament" -msgstr "Adicionar Preset de Filamento sob este filamento" +msgstr "Adicionar Predefinição de Filamento sob este filamento" msgid "We could create the filament presets for your following printer:" -msgstr "Nós criamos presets de filamento para a sua impressora:" +msgstr "Nós criamos predefinições de filamento para a sua impressora:" msgid "Select Vendor" msgstr "Selecionar Fornecedor" @@ -15478,7 +19596,7 @@ msgid "Select Type" msgstr "Selecionar Tipo" msgid "Select Filament Preset" -msgstr "Selecionar Preset de Filamento" +msgstr "Selecionar Predefinição de Filamento" msgid "Serial" msgstr "Série" @@ -15487,13 +19605,13 @@ msgid "e.g. Basic, Matte, Silk, Marble" msgstr "por exemplo, Básico, Fosco, Seda, Mármore" msgid "Filament Preset" -msgstr "Preset de Filamento" +msgstr "Predefinição de Filamento" msgid "Create" msgstr "Criar" msgid "Vendor is not selected, please reselect vendor." -msgstr "Fornecedor não está selecionado, por favor, reselecione o fornecedor." +msgstr "Fornecedor não está selecionado, por favor reselecione o fornecedor." msgid "Custom vendor is not input, please input custom vendor." msgstr "" @@ -15501,17 +19619,17 @@ msgstr "" "personalizado." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" ou \"Genérico\" não podem ser usados como fornecedor para " "filamentos personalizados." msgid "Filament type is not selected, please reselect type." msgstr "" -"O tipo de filamento não está selecionado, por favor, reselecione o tipo." +"O tipo de filamento não está selecionado, por favor reselecione o tipo." -msgid "Filament serial is not inputed, please input serial." -msgstr "O serial do filamento não foi inserido, por favor, insira o serial." +msgid "Filament serial is not entered, please enter serial." +msgstr "O serial do filamento não foi inserido, por favor insira o serial." msgid "" "There may be escape characters in the vendor or serial input of filament. " @@ -15525,27 +19643,28 @@ msgstr "" "Todas as entradas no fornecedor personalizado ou serial são espaços. Por " "favor, insira novamente." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "O fornecedor não pode ser um número. Por favor, insira novamente." msgid "" "You have not selected a printer or preset yet. Please select at least one." msgstr "" -"Você ainda não selecionou uma impressora ou preset. Por favor, selecione " -"pelo menos um." +"Você ainda não selecionou uma impressora ou predefinição. Por favor, " +"selecione pelo menos uma." #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"O nome do Filamento %s que você criou já existe. \n" -"Se você continuar a criar, a preset criado será exibido com o seu nome " -"completo. Você quer continuar?" +"O nome do Filamento %s que você criou já existe.\n" +"Se você continuar a criação, a predefinição criada será exibida com o seu " +"nome completo. Você quer continuar?" msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "Alguns presets existentes falharam ao serem criados, como segue:\n" +msgstr "" +"Algumas predefinições existentes falharam ao serem criadas, como segue:\n" msgid "" "\n" @@ -15556,13 +19675,13 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" -"Renomearíamos os presets como \"Fornecedor Tipo Serial @ impressora que você " -"selecionou\". \n" -"Para adicionar preset para mais impressoras, Por favor, vá para a seleção de " -"impressoras" +"Renomearíamos as predefinições como \"Fornecedor Tipo Serial @ impressora " +"que você selecionou\".\n" +"Para adicionar predefinição para mais impressoras, por favor vá para a " +"seleção de impressoras" msgid "Create Printer/Nozzle" msgstr "Criar Impressora/Bico" @@ -15574,32 +19693,38 @@ msgid "Create Nozzle for Existing Printer" msgstr "Criar Bico para Impressora Existente" msgid "Create from Template" -msgstr "Criar a Partir de um Modelo" +msgstr "Criar a partir de um Gabarito" msgid "Create Based on Current Printer" msgstr "Criar com Base na Impressora Atual" msgid "Import Preset" -msgstr "Importar Preset" +msgstr "Importar Predefinição" msgid "Create Type" msgstr "Tipo de Criação" -msgid "The model is not found, place reselect vendor." -msgstr "O modelo não foi encontrado, por favor, reselecione o fornecedor." - -msgid "Select Model" -msgstr "Selecionar Modelo" +msgid "The model was not found, please reselect vendor." +msgstr "O modelo não foi encontrado, por favor reselecione o fornecedor." msgid "Select Printer" msgstr "Selecionar Impressora" +msgid "Select Model" +msgstr "Selecionar Modelo" + msgid "Input Custom Model" msgstr "Inserir Modelo Personalizado" msgid "Can't find my printer model" msgstr "Não consigo encontrar o modelo da minha impressora" +msgid "Input Custom Nozzle Diameter" +msgstr "Inserir Diâmetro de Bico Personalizado" + +msgid "Can't find my nozzle diameter" +msgstr "Não consigo encontrar o diâmetro do meu bico" + msgid "Rectangle" msgstr "Retângulo" @@ -15607,61 +19732,53 @@ msgid "Printable Space" msgstr "Espaço Imprimível" msgid "Hot Bed STL" -msgstr "STL da Base Aquecida" - -msgid "Load stl" -msgstr "Carregar STL" +msgstr "STL da Mesa Aquecida" msgid "Hot Bed SVG" -msgstr "SVG da Base Aquecida" - -msgid "Load svg" -msgstr "Carregar svg" +msgstr "SVG da Mesa Aquecida" msgid "Max Print Height" msgstr "Altura de impressão máxima" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." -msgstr "O arquivo excede %d MB, por favor, importe novamente." +msgstr "O arquivo excede %d MB, por favor importe novamente." msgid "Exception in obtaining file size, please import again." -msgstr "Exceção ao obter o tamanho do arquivo, por favor, importe novamente." +msgstr "Exceção ao obter o tamanho do arquivo, por favor importe novamente." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "" -"O caminho do preset não é encontrado, por favor, reselecione o fornecedor." +"Caminho da predefinição não encontrado, por favor reselecione o fornecedor." msgid "The printer model was not found, please reselect." -msgstr "O modelo da impressora não foi encontrado, por favor, reselecione." +msgstr "O modelo da impressora não foi encontrado, por favor reselecione." -msgid "The nozzle diameter is not found, place reselect." -msgstr "O diâmetro do bico não foi encontrado, por favor, reselecione." +msgid "The nozzle diameter was not found, please reselect." +msgstr "O diâmetro do bico não foi encontrado, por favor reselecione." -msgid "The printer preset is not found, place reselect." -msgstr "O preset da impressora não foi encontrado, por favor, reselecione." +msgid "The printer preset was not found, please reselect." +msgstr "" +"A predefinição de impressora não foi encontrada, por favor reselecione." msgid "Printer Preset" -msgstr "Preset de Impressora" +msgstr "Predefinição de Impressora" msgid "Filament Preset Template" -msgstr "Modelo de Preset de Filamento" +msgstr "Gabarito de Predefinição de Filamento" msgid "Deselect All" msgstr "Desselecionar Tudo" msgid "Process Preset Template" -msgstr "Processar Modelo de Preset" - -msgid "Back Page 1" -msgstr "Voltar à Página 1" +msgstr "Processar Gabarito de Predefinição" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Você ainda não escolheu em qual preset de impressora basear-se. Por favor, " -"escolha o fornecedor e modelo da impressora" +"Você ainda não escolheu em qual predefinição de impressora basear-se. Por " +"favor escolha o fornecedor e modelo da impressora" msgid "" "You have entered an illegal input in the printable area section on the first " @@ -15670,9 +19787,6 @@ msgstr "" "Você inseriu uma entrada ilegal na seção de área imprimível na primeira " "página. Por favor, verifique antes de criar." -msgid "The custom printer or model is not inputed, place input." -msgstr "A impressora ou modelo personalizado não foi colocado." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15682,38 +19796,39 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" -"O modelo de impressora que você criou já possui um modelo com o mesmo nome. " -"Deseja substituí-lo?\n" -" \tSim: Substituir o modelo de impressora com o mesmo nome, e os modelos de " -"filamento e processo com o mesmo nome do modelo serão recriados, \n" -" e os modelos de filamento e processo sem o mesmo nome do modelo serão " -"preservados.\n" -" \tCancelar: Não criar um modelo, retornar para a interface de criação." +"A predefinição de impressora que você criou já possui uma predefinição com o " +"mesmo nome. Deseja substituí-la?\n" +"\tSim: Substituir a predefinição de impressora com o mesmo nome, e as " +"predefinições de filamento e processo com o mesmo nome da predefinição serão " +"recriados, \n" +"e as predefinições de filamento e processo sem o mesmo nome da predefinição " +"serão reserva.\n" +"\tCancelar: Não criar uma predefinição, retornar para a interface de criação." msgid "You need to select at least one filament preset." -msgstr "Você precisa selecionar pelo menos um modelo de filamento." +msgstr "Você precisa selecionar pelo menos uma predefinição de filamento." msgid "You need to select at least one process preset." -msgstr "Você precisa selecionar pelo menos um modelo de processo." +msgstr "Você precisa selecionar pelo menos uma predefinição de processo." msgid "Create filament presets failed. As follows:\n" -msgstr "Falha ao criar modelos de filamento. Como segue:\n" +msgstr "Falha ao criar predefinições de filamento. Como segue:\n" msgid "Create process presets failed. As follows:\n" -msgstr "Falha ao criar modelos de processo. Como segue:\n" +msgstr "Falha ao criar predefinições de processo. Como segue:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Fornecedor não encontrado, por favor selecione novamente." msgid "Current vendor has no models, please reselect." -msgstr "O fornecedor atual não possui modelos, por favor, selecione novamente." +msgstr "O fornecedor atual não possui modelos, por favor selecione novamente." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" -"Você não selecionou um fornecedor e modelo nem colocou fornecer e modelo " -"personalizado." +"Você não selecionou um fornecedor e modelo nem colocou fornecedor e modelo " +"personalizados." msgid "" "There may be escape characters in the custom printer vendor or model. Please " @@ -15729,18 +19844,30 @@ msgstr "" "espaços. Por favor, insira novamente." msgid "Please check bed printable shape and origin input." -msgstr "Por favor, verifique a forma imprimível da mesa e a entrada de origem." +msgstr "" +"Por favor, verifique o formato imprimível da mesa e a entrada de origem." msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" -"Você ainda não selecionou a impressora para substituir o bico, por favor, " +"Você ainda não selecionou a impressora para substituir o bico, por favor " "escolha." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" +"O diâmetro do bico inserido é inválido. Insira novamente:\n" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" +"A configuração predefinida do sistema não permite a criação. \n" +"Insira novamente o modelo da impressora ou o diâmetro do bico." + +msgid "Printer Created Successfully" msgstr "Impressora criada com sucesso" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Filamento criado com sucesso" msgid "Printer Created" @@ -15748,7 +19875,8 @@ msgstr "Impressora criada" msgid "Please go to printer settings to edit your presets" msgstr "" -"Por favor vá parar configurações de impressora para editar os seus presets" +"Por favor vá para configurações de impressora para editar as suas " +"predefinições" msgid "Filament Created" msgstr "Filamento criado" @@ -15759,8 +19887,8 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"Por favor, vá para as configurações do filamento para editar seus presets, " -"se necessário. \n" +"Por favor, vá para as configurações do filamento para editar suas " +"predefinições, se necessário.\n" "Por favor, note que a temperatura do bico, temperatura da mesa aquecida e " "velocidade volumétrica máxima têm um impacto significativo na qualidade de " "impressão. Por favor, ajuste-os com cuidado." @@ -15770,16 +19898,16 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Orca detectou que a função de sincronização das suas predefinições de " "usuário não está habilitada, o que pode resultar em falhas nas configurações " -"de Filamento na página do Dispositivo. \n" -"Clique em \"Sincronizar presets do usuário\" para habilitar a função de " -"sincronização." +"de Filamento na página do Dispositivo.\n" +"Clique em \"Sincronizar predefinições do usuário\" para habilitar a função " +"de sincronização." msgid "Printer Setting" msgstr "Configuração da Impressora" @@ -15791,13 +19919,13 @@ msgid "Filament bundle(.orca_filament)" msgstr "Pacote de filamento (.orca_filament)" msgid "Printer presets(.zip)" -msgstr "Presets da impressora (.zip)" +msgstr "Predefinições de impressora (.zip)" msgid "Filament presets(.zip)" -msgstr "Presets de filamento (.zip)" +msgstr "Predefinições de filamento (.zip)" msgid "Process presets(.zip)" -msgstr "Presets de processo (.zip)" +msgstr "Predefinições de processo (.zip)" msgid "initialize fail" msgstr "falha na inicialização" @@ -15828,59 +19956,70 @@ msgstr "" "Se não, um sufixo de tempo será adicionado, e você poderá modificar o nome " "após a criação." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" +"O arquivo: %s \n" +"pode ter sido aberto por outro programa.\n" +"Por favor feche e tente novamente." + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"Presets da impressora e todos os filamentos e processos que pertencem à " -"impressora. \n" +"Predefinições de impressora e todos os filamentos e processos que pertencem " +"à impressora.\n" "Pode ser compartilhado com outros." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Conjunto de presets de filamento do usuário. \n" +"Conjunto de predefinições de filamento do usuário.\n" "Pode ser compartilhado com outros." msgid "" "Only display printer names with changes to printer, filament, and process " "presets." msgstr "" -"Só exibir nomes de impressoras com alterações nos presets de impressora, " -"filamento e processo." +"Exibir apenas nomes de impressoras com alterações nas predefinições de " +"impressora, filamento e processo." msgid "Only display the filament names with changes to filament presets." msgstr "" -"Apenas exibir os nomes dos filamentos com alterações nos presets de " +"Exibir apenas os nomes dos filamentos com alterações nas predefinições de " "filamento." msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Apenas os nomes das impressoras com presets de impressora do usuário serão " -"exibidos, e cada preset escolhido será exportado como um arquivo zip." +"Apenas os nomes das impressoras com predefinições de impressora do usuário " +"serão exibidos, e cada predefinição escolhida será exportada como um arquivo " +"zip." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" -"Apenas os nomes dos filamentos com presets de filamento do usuário serão " -"exibidos, \n" -"e todas as presets de filamento do usuário em cada nome de filamento " -"selecionado serão exportadas como um arquivo zip." +"Apenas os nomes dos filamentos com predefinições de filamento do usuário " +"serão exibidos, \n" +"e todas as predefinições de filamento do usuário em cada nome de filamento " +"selecionadas serão exportadas como um arquivo zip." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" -"Apenas os nomes das impressoras com presets de processo alterados serão " -"exibidos, \n" -"e todos os presets de processo do usuário em cada nome de impressora " -"selecionado serão exportados como um arquivo zip." +"Apenas os nomes das impressoras com predefinições de processo alterados " +"serão exibidos, \n" +"e todas os predefinições de processo do usuário em cada nome de impressora " +"selecionadas serão exportados como um arquivo zip." msgid "Please select at least one printer or filament." msgstr "Por favor, selecione pelo menos uma impressora ou filamento." @@ -15890,80 +20029,87 @@ msgstr "Por favor, selecione um tipo que deseja exportar" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "" -"Falha ao criar uma pasta temporária, por favor, tente exportar as " +"Falha ao criar uma pasta temporária, por favor tente exportar as " "configurações novamente." msgid "Edit Filament" msgstr "Editar Filamento" msgid "Filament presets under this filament" -msgstr "Presets de filamento sob este filamento" +msgstr "Predefinições de filamento sob este filamento" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." msgstr "" -"Nota: Se o único preset sob este filamento for excluído, o filamento será " -"excluído após sair da janela." +"Nota: Se a única predefinição sob este filamento for excluída, o filamento " +"será excluído após sair da janela." -msgid "Presets inherited by other presets can not be deleted" -msgstr "Presets herdados por outros presets não podem ser excluídos" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" +"Predefinições herdadas por outras predefinições não podem ser excluídos" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "Os seguintes presets herdam este preset." -msgstr[1] "A seguinte predefinição herda essa predefinição." +msgstr[0] "As seguintes predefinições herdam esta predefinição." +msgstr[1] "A seguinte predefinição herda esta predefinição." msgid "Delete Preset" -msgstr "Excluir Preset" - -msgid "Are you sure to delete the selected preset?" -msgstr "Tem certeza de que deseja excluir o preset selecionado?" - -msgid "Delete preset" -msgstr "Excluir preset" - -msgid "+ Add Preset" -msgstr "+ Adicionar Preset" - -msgid "Delete Filament" -msgstr "Excluir Filamento" +msgstr "Excluir Predefinição" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Tem certeza de que deseja excluir a predefinição selecionada?\n" +"Se a predefinição corresponde a um filamento atualmente em uso em sua " +"impressora, redefina as informações do filamento para esse espaço." + +msgid "Are you sure to delete the selected preset?" +msgstr "Tem certeza de que deseja excluir a predefinição selecionada?" + +msgid "Delete preset" +msgstr "Excluir predefinição" + +msgid "+ Add Preset" +msgstr "+ Adicionar Predefinição" + +msgid "" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Todos os presets de filamento pertencentes a este filamento seriam " -"excluídas. \n" +"Todos as predefinições de filamento pertencentes a este filamento seriam " +"excluídas.\n" "Se você estiver usando este filamento em sua impressora, redefina as " -"informações do filamento para esse slot." +"informações do filamento para esse espaço." msgid "Delete filament" msgstr "Excluir filamento" msgid "Add Preset" -msgstr "Adicionar Preset" +msgstr "Adicionar Predefinição" msgid "Add preset for new printer" -msgstr "Adicionar preset para nova impressora" +msgstr "Adicionar predefinição para nova impressora" msgid "Copy preset from filament" -msgstr "Copiar preset do filamento" +msgstr "Copiar predefinição do filamento" msgid "The filament choice not find filament preset, please reselect it" msgstr "" -"O filamento selecionado não encontra preset de filamento, por favor, " +"O filamento selecionado não encontra predefinição de filamento, por favor " "selecione novamente" msgid "[Delete Required]" msgstr "[Excluir Necessário]" msgid "Edit Preset" -msgstr "Editar Preset" +msgstr "Editar Predefinição" msgid "For more information, please check out Wiki" -msgstr "Para mais informações, por favor, consulte a Wiki" +msgstr "Para mais informações, por favor consulte a Wiki" msgid "Collapse" msgstr "Recolher" @@ -15972,19 +20118,39 @@ msgid "Daily Tips" msgstr "Dicas Diárias" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "bico memorizado: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" -msgstr "" -"O diâmetro do bico no seu perfil não está consistente com o diâmetro do bico " -"memorizado. Você mudou seu bico recentemente?" +msgid "nozzle size in preset: %d" +msgstr "tamanho do bico na predefinição: %d" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Imprimir material %s com %s pode causar danos ao bico" +msgid "nozzle size memorized: %d" +msgstr "tamanho do bico memorizado: %d" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" +"O tamanho do bico na prédefinição não corresponde ao bico memorizado. Você " +"trocou o bico recentemente?" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "bico[%d] na predefinição: %.1f" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "bico[%d] memorizado: %.1f" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" +"O tipo de bico predefinido não corresponde ao bico memorizado. Você trocou " +"o bico recentemente?" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" +"Imprimir material %1s com bico %2s pode causar danos ao bico." msgid "Need select printer" msgstr "É necessário selecionar uma impressora" @@ -15992,6 +20158,47 @@ msgstr "É necessário selecionar uma impressora" msgid "The start, end or step is not valid value." msgstr "O início, fim ou passo não é um valor válido." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" +"O número de extrusoras da impressora e a impressora selecionada para " +"calibração não correspondem." + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"O diâmetro do bico selecionado para a extrusora %s não corresponde ao " +"diâmetro real do bico.\n" +"Clique no botão Sincronizar acima e reinicie a calibração." + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"O diâmetro do bico não corresponde ao diâmetro real do bico da impressora.\n" +"Clique no botão Sincronizar acima e reinicie a calibração." + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" +"O tipo de bico selecionado para a extrusora %s não corresponde ao tipo de " +"bico real da impressora.\n" +"Clique no botão Sincronizar acima e reinicie a calibração." + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" +"A calibração automática suporta apenas casos em que os diâmetros dos bicos " +"esquerdo e direito são idênticos." + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -16014,14 +20221,12 @@ msgstr "Sucesso!" msgid "Are you sure to log out?" msgstr "Tem certeza de que deseja sair?" -msgid "Refresh Printers" -msgstr "Atualizar Impressoras" - msgid "View print host webui in Device tab" -msgstr "" +msgstr "Exibir webui do host de impressão na aba Dispositivo" msgid "Replace the BambuLab's device tab with print host webui" msgstr "" +"Substituir a aba do dispositivo do BambuLab pela webui do host de impressão" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" @@ -16063,22 +20268,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Tipo de Host de Impressão incompatível: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "A conexão com o AstroBox funciona corretamente." msgid "Could not connect to AstroBox" msgstr "Não foi possível conectar-se ao AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Nota: Versão do AstroBox de pelo menos 1.1.0 é necessária." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "Nota: AstroBox versão 1.1.0 ou maior é necessário." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "A conexão com o Duet funciona corretamente." msgid "Could not connect to Duet" msgstr "Não foi possível conectar-se ao Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Ocorreu um erro desconhecido" msgid "Wrong password" @@ -16090,7 +20295,7 @@ msgstr "Não foi possível obter recursos para criar uma nova conexão" msgid "Upload not enabled on FlashAir card." msgstr "Upload não ativado no cartão FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" "A conexão com o FlashAir funciona corretamente e o upload está ativado." @@ -16104,28 +20309,28 @@ msgstr "" "Nota: FlashAir com firmware 2.00.02 ou mais recente e função de upload " "ativada são necessárias." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "A conexão com o MKS funciona corretamente." msgid "Could not connect to MKS" msgstr "Não foi possível conectar-se ao MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "A conexão com o OctoPrint funciona corretamente." msgid "Could not connect to OctoPrint" msgstr "Não foi possível conectar-se ao OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Nota: Versão do OctoPrint de pelo menos 1.1.0 é necessária." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "Nota: OctoPrint versão 1.1.0 ou maior é necessário." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "A Conexão com Prusa SL1 / SL1S funciona corretamente." msgid "Could not connect to Prusa SLA" msgstr "Não foi possível conectar-se ao Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "A conexão com PrusaLink funciona corretamente." msgid "Could not connect to PrusaLink" @@ -16147,22 +20352,22 @@ msgstr "%1% : sem espaço livre" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "Falha no ‘upload’. Não há armazenamento suficiente em %1%." +msgstr "Falha no envio. Não há armazenamento adequado em %1%." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "A conexão com o Prusa Connect funciona corretamente." msgid "Could not connect to Prusa Connect" -msgstr "Não foi possível conectar-se ao Prusa Connect." +msgstr "Não foi possível conectar-se ao Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "A conexão com o Repetier funciona corretamente." msgid "Could not connect to Repetier" msgstr "Não foi possível conectar-se ao Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Nota: A versão do Repetier deve ser igual ou maior que 0.90.0" +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "Nota: Repetier versão 0.90.0 ou maior é necessário." #, boost-format msgid "" @@ -16193,265 +20398,646 @@ msgstr "" "Error: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"Possui uma pequena altura de camada, resultando em linhas de camada quase " -"imperceptíveis e alta qualidade de impressão. É adequado para a maioria dos " -"casos gerais de impressão." +"Possui uma pequena altura de camada. Isso resulta em linhas de camada quase " +"insignificantes e alta qualidade de impressão. É adequado para a maioria dos " +"casos de impressão." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,2 mm, ele tem velocidades e " -"aceleração mais baixas, e o padrão de preenchimento é Giroide. Isso resulta " -"em uma qualidade de impressão muito superior, mas um tempo de impressão " +"aceleração mais baixas, e o padrão de preenchimento esparso é Giroide. Isso " +"resulta em uma qualidade de impressão muito maior, mas um tempo de impressão " "muito mais longo." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,2 mm, tem uma altura de camada " -"um pouco maior, resultando em linhas de camada quase insignificantes e um " -"tempo de impressão ligeiramente menor." +"ligeiramente maior. Isso resulta em linhas de camada quase insignificantes e " +"um tempo de impressão ligeiramente mais curto." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,2 mm, tem uma altura de camada " -"maior, o que resulta em linhas de camada ligeiramente visíveis, mas um tempo " -"de impressão menor." +"maior. Isso resulta em linhas de camada ligeiramente visíveis, mas um tempo " +"de impressão mais curto." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,2 mm, tem uma altura de camada " -"menor, resultando em linhas de camada quase invisíveis e maior qualidade de " -"impressão, mas um tempo de impressão menor." +"menor. Isso resulta em linhas de camada quase invisíveis e maior qualidade " +"de impressão, mas um tempo de impressão mais longo." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,2 mm, tem linhas de camada " -"menores, velocidades e aceleração mais baixas, e o padrão de preenchimento é " -"Giroide. Isso resulta em linhas de camada quase invisíveis e uma qualidade " -"de impressão muito superior, mas um tempo de impressão muito maior." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." -msgstr "" -"Comparado com o perfil padrão de um bico de 0,2 mm, tem uma altura de camada " -"menor, resultando em linhas de camada mínimas e maior qualidade de " -"impressão, mas um tempo de impressão menor." - -msgid "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Comparado com o perfil padrão de um bico de 0,2 mm, tem linhas de camada " -"menores, velocidades e aceleração mais baixas, e o padrão de preenchimento é " -"Giroide. Isso resulta em linhas de camada mínimas e uma qualidade de " -"impressão muito superior, mas um tempo de impressão muito maior." - -msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"Tem uma altura de camada padrão e resulta em linhas de camada e qualidade de " -"impressão padrão. É adequado para a maioria dos casos de impressão." - -msgid "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Comparado com o perfil padrão de uma bico de 0,4 mm, tem mais paredes e uma " -"densidade de preenchimento mais alta. Portanto, resulta em maior " -"resistência, mas com consumo maior de filamento e tempo de impressão mais " +"menores, velocidades e aceleração mais baixas, e o padrão de preenchimento " +"esparso é Giroide. Isso resulta em linhas de camada quase invisíveis e uma " +"qualidade de impressão muito maior, mas um tempo de impressão muito mais " "longo." msgid "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"Comparado com o perfil padrão de uma bico de 0,4 mm, tem uma altura de " -"camada maior, resultando em linhas de camada mais aparentes e qualidade mais " -"baixa, mas com um tempo de impressão um pouco menor." +"Comparado com o perfil padrão de um bico de 0,2 mm, tem uma altura de camada " +"menor. Isso resulta em linhas de camada mínimas e qualidade de impressão " +"maior, mas um tempo de impressão mais longo." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"lines, lower speeds and acceleration, and the sparse infill pattern is " +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." +msgstr "" +"Comparado com o perfil padrão de um bico de 0,2 mm, tem linhas de camada " +"menores, velocidades e aceleração mais baixas, e o padrão de preenchimento " +"esparso é Giroide. Isso resulta em linhas de camada mínimas e uma qualidade " +"de impressão muito maior, mas um tempo de impressão muito mais longo." + +msgid "" +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." +msgstr "" +"Tem uma altura de camada padrão. Isso resulta em linhas de camada e " +"qualidade de impressão padrão. É adequado para a maioria dos casos de " +"impressão." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." +msgstr "" +"Comparado com o perfil padrão de uma bico de 0,4 mm, tem mais voltas de " +"parede e uma densidade de preenchimento esparso mais alta. Isso resulta em " +"maior resistência, mas com consumo maior de filamento e tempo de impressão " +"mais longo." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "Comparado com o perfil padrão de uma bico de 0,4 mm, tem uma altura de " -"camada maior, resultando em linhas de camada mais aparentes e qualidade mais " -"baixa, mas com um tempo de impressão menor." +"camada maior. Isso resulta em linhas de camada mais aparentes e qualidade " +"mais baixa, mas com um tempo de impressão um pouco menor." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." +msgstr "" +"Comparado com o perfil padrão de uma bico de 0,4 mm, tem uma altura de " +"camada maior. Isso resulta em linhas de camada mais aparentes e qualidade " +"mais baixa, mas com um tempo de impressão mais curto." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,4 mm, tem uma altura de camada " -"menor, resultando em linhas de camada menos aparentes e maior qualidade de " -"impressão, mas com um tempo de impressão maior." +"menor. Isso resulta em linhas de camada menos aparentes e maior qualidade de " +"impressão, mas com um tempo de impressão mais longo." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,4 mm, tem uma altura de camada " -"menor, velocidades e aceleração mais baixas, e o padrão de preenchimento é " -"Giroide. Portanto, resulta em linhas de camada menos aparentes e qualidade " -"de impressão maior, mas com um tempo de impressão muito maior." +"menor, velocidades e aceleração mais baixas, e o padrão de preenchimento " +"esparso é Giroide. Isso resulta em linhas de camada menos aparentes e " +"qualidade de impressão maior, mas com um tempo de impressão muito mais longo." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,4 mm, tem uma altura de camada " -"menor, resultando em linhas de camada quase insignificantes e maior " +"menor. Isso resulta em linhas de camada quase insignificantes e maior " "qualidade de impressão, mas com um maior tempo de impressão." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,4 mm, tem uma altura de camada " -"menor, velocidades e aceleração mais baixas, e o padrão de preenchimento é " -"Giroide. Portanto, resulta em linhas de camada quase insignificantes e " +"menor, velocidades e aceleração mais baixas, e o padrão de preenchimento " +"esparso é Giroide. Isso resulta em linhas de camada quase insignificantes e " "qualidade de impressão muito maior, mas com um tempo de impressão muito " "maior." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,4 mm, tem uma altura de camada " -"menor, resultando em linhas de camada quase insignificantes, mas com um " -"tempo de impressão maior." +"menor. Isso resulta em linhas de camada quase insignificantes, mas com um " +"tempo de impressão mais longo." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"Tem uma altura de camada grande, resultando em linhas de camada aparentes " +"Tem uma altura de camada grande. Isso resulta em linhas de camada aparentes " "com qualidade e tempo de impressão normais." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" -"Comparado com o perfil padrão de um bico de 0,6 mm, tem mais paredes e uma " -"densidade de preenchimento mais alta. Portanto, resulta em uma resistência " -"maior, mas com um consumo de filamento maior e um tempo de impressão mais " -"longo." +"Comparado com o perfil padrão de um bico de 0,6 mm, tem mais voltas de " +"parede e uma densidade de preenchimento esparso mais alta. Isso resulta em " +"uma resistência maior, mas com um consumo de filamento maior e um tempo de " +"impressão mais longo." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,6 mm, tem uma altura de camada " -"maior, resultando em linhas de camada mais aparentes e qualidade mais baixa, " -"mas com um tempo de impressão menor em alguns casos de impressão." +"maior. Isso resulta em linhas de camada mais aparentes e qualidade mais " +"baixa, mas com um tempo de impressão mais curto em alguns casos." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,6 mm, tem uma altura de camada " -"maior, resultando em linhas de camada muito mais aparentes e qualidade muito " -"mais baixa, mas com um tempo de impressão menor em alguns casos de impressão." +"maior. Isso resulta em linhas de camada muito mais aparentes e qualidade " +"muito mais baixa, mas com um tempo de impressão mais curto em alguns casos." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,6 mm, tem uma altura de camada " -"menor, resultando em linhas de camada menos aparentes e qualidade " -"ligeiramente maior, mas com um tempo de impressão maior." +"menor. Isso resulta em linhas de camada menos aparentes e qualidade " +"ligeiramente maior, mas com um tempo de impressão mais longo." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Comparado com o perfil padrão de um bico de 0,6 mm, tem uma altura de camada " -"menor, resultando em linhas de camada menos aparentes e maior qualidade de " -"impressão, mas com um tempo de impressão maior." +"menor. Isso resulta em linhas de camada menos aparentes e maior qualidade de " +"impressão, mas com um tempo de impressão mais longo." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Tem uma altura de camada muito grande, resultando em linhas de camada muito " -"aparentes, com qualidade e tempo de impressão baixo." +"Tem uma altura de camada muito grande. Isso resulta em linhas de camada " +"muito aparentes, com qualidade e tempo de impressão mais curto." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,8 mm, tem uma altura de camada " -"maior, resultando em linhas de camada muito aparentes e qualidade muito mais " -"baixa, mas com um tempo de impressão menor em alguns casos de impressão." +"maior. Isso resulta em linhas de camada muito aparentes e qualidade muito " +"mais baixa, mas com um tempo de impressão mais curto em alguns casos." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,8 mm, tem uma altura de camada " -"muito maior, resultando em linhas de camada extremamente aparentes e " -"qualidade muito mais baixa, mas com um tempo de impressão muito menor em " -"alguns casos de impressão." +"muito maior. Isso resulta em linhas de camada extremamente aparentes e " +"qualidade muito mais baixa, mas com um tempo de impressão mais curto em " +"alguns casos." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,8 mm, tem uma altura de camada " -"ligeiramente menor, resultando em linhas de camada menos aparentes, mas " +"ligeiramente menor. Isso resulta em linhas de camada menos aparentes, mas " "ainda visíveis, e qualidade ligeiramente maior, mas com um tempo de " -"impressão maior em alguns casos de impressão." +"impressão mais longo em alguns casos." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." msgstr "" "Comparado com o perfil padrão de um bico de 0,8 mm, tem uma altura de camada " -"menor, resultando em linhas de camada menos aparentes, mas ainda visíveis, e " -"qualidade ligeiramente maior, mas com um tempo de impressão maior em alguns " -"casos de impressão." +"menor. Isso resulta em linhas de camada menos aparentes mas ainda visíveis, " +"e qualidade ligeiramente maior, mas com um tempo de impressão mais longo em " +"alguns casos." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" +"Este não é um filamento de uso comum, nem um dos filamentos da Bambu, e seu " +"desempenho varia bastante de marca para marca. Portanto, é altamente " +"recomendável consultar o fornecedor para obter o perfil adequado antes da " +"impressão e ajustar alguns parâmetros de acordo com o seu desempenho." + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" +"Ao imprimir com este filamento, existe o risco de deformação e baixa " +"adesão entre as camadas. Para obter melhores resultados, consulte este " +"guia: Dicas de impressão para materiais de alta temperatura/engenharia." + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" +"Ao imprimir com este filamento, existe o risco de entupimento do bico, " +"vazamento, deformação e baixa adesão entre as camadas. Para obter melhores " +"resultados, consulte este guia: Dicas de impressão para materiais de alta " +"temperatura/engenharia." + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" +"Para obter melhores resultados de impressão transparente ou translúcida com o " +"filamento correspondente, consulte este guia: Dicas de impressão para PETG " +"transparente." + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" +"Para obter impressões com maior brilho, seque o filamento antes de usar e " +"defina a velocidade da parede externa entre 40 e 60 mm/s durante o fatiamento." + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" +"Este filamento é geralmente usado para imprimir modelos com baixa densidade " +"e requer alguns parâmetros especiais. Para obter melhor qualidade de " +"impressão, consulte este guia: Instruções para impressão de modelos RC com " +"PLA expansível (PLA Aero)." + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" +"Este filamento é geralmente utilizado para imprimir modelos com baixa " +"densidade e requer parâmetros específicos. Para obter melhor qualidade de " +"impressão, consulte este guia na wiki: Guia de Impressão ASA Aero." + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" +"Este filamento é muito macio e incompatível com o AMS. A impressão com ele " +"requer muitos parâmetros especiais. Para obter uma melhor qualidade de " +"impressão, consulte este guia na wiki: Guia de impressão em TPU." + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" +"Este filamento possui dureza suficiente (cerca de 67D) e é compatível com " +"o AMS. A impressão com ele requer alguns cuidados, e para obter melhor " +"qualidade de impressão, consulte este guia na wiki: Guia de impressão em TPU." + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" +"Se você for imprimir um tipo de TPU macio, por favor, não use este perfil " +"para fatiar. Ele é indicado apenas para TPU com dureza suficiente (não " +"inferior a 55D) e compatível com o AMS. Para obter melhor qualidade de " +"impressão, consulte este guia na wiki: Guia de impressão de TPU." + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" +"Este é um filamento de suporte solúvel em água, geralmente usado apenas na " +"estrutura de suporte e não no corpo do modelo. A impressão com este " +"filamento requer alguns cuidados, e para obter melhor qualidade de " +"impressão, consulte este guia na wiki: Guia de Impressão com PVA." + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" +"Este é um filamento de suporte não solúvel em água, geralmente usado apenas " +"na estrutura de suporte e não no corpo do modelo. Para obter melhor " +"qualidade de impressão, consulte este artigo da wiki: Dicas de Impressão " +"para Filamento de Suporte e Função de Suporte." + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" +"As configurações genéricas são ajustadas de forma conservadora para " +"compatibilidade com uma gama mais ampla de filamentos. Para obter maior " +"qualidade e velocidade de impressão, use filamentos Bambu com as configurações " +"Bambu." + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" +"Perfil de alta qualidade para bico de 0,2 mm, priorizando a qualidade de " +"impressão." + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" +"Perfil de alta qualidade para altura de camada de 0,16 mm, priorizando a " +"qualidade de impressão e a resistência." + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" +"Perfil padrão para altura de camada de 0,16 mm, priorizando a velocidade." + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" +"Perfil de alta qualidade para altura de camada de 0,2 mm, priorizando " +"resistência e qualidade de impressão." + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" +"Perfil padrão para bico de 0,4 mm, priorizando a velocidade." + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" +"Perfil de alta qualidade para bico de 0,6 mm, priorizando a qualidade de " +"impressão e a resistência." + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" +"Perfil de resistência para bico de 0,6 mm, priorizando a resistência." + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" +"Perfil padrão para bico de 0,6 mm, priorizando a velocidade." + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" +"Perfil de alta qualidade para bico de 0,8 mm, priorizando a qualidade de " +"impressão." + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" +"Perfil de resistência para bico de 0,8 mm, priorizando a resistência." + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" +"Perfil padrão para bico de 0,8 mm, priorizando a velocidade." + +msgid "No AMS" +msgstr "Nenhum AMS" + +msgid "There is no device available to send printing." +msgstr "Não há nenhum dispositivo disponível para enviar impressão." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "O número de impressoras em uso simultaneamente não pode ser igual a 0." + +msgid "Use External Spool" +msgstr "Usar Carretel Externo" + +msgid "Select Printers" +msgstr "Selecionar impressoras" + +msgid "Device Name" +msgstr "Nome do Dispositivo" + +msgid "Device Status" +msgstr "Status do dispositivo" + +msgid "AMS Status" +msgstr "Status do AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Por favor, selecione os dispositivos que você gostaria de gerenciar aqui " +"(até 6 dispositivos)" + +msgid "Printing Options" +msgstr "Opções de Impressão" + +msgid "Bed Leveling" +msgstr "Nivelamento da mesa" + +msgid "Flow Dynamic Calibration" +msgstr "Calibração de Fluxo Dinâmico" + +msgid "Send Options" +msgstr "Opções de envio" + +msgid "Send to" +msgstr "Enviar para" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"impressoras ao mesmo tempo. (Depende de quantos dispositivos podem ser " +"submetidos ao mesmo tempo.)" + +msgid "Wait" +msgstr "Aguarde" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"minuto por cada lote. (Depende de quanto tempo leva para completar o " +"aquecimento.)" + +msgid "Task Sending" +msgstr "Envio de tarefa" + +msgid "Task Sent" +msgstr "Tarefa Enviada" + +msgid "Edit multiple printers" +msgstr "Editar múltiplas impressoras" + +msgid "Select connected printers (0/6)" +msgstr "Selecione impressoras conectadas (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Selecione Impressoras Conectadas (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "O número máximo de impressoras que podem ser selecionadas é %d" + +msgid "No task" +msgstr "Nenhuma tarefa" + +msgid "Edit Printers" +msgstr "Editar impressoras" + +msgid "Task Name" +msgstr "Nome da tarefa" + +msgid "Actions" +msgstr "Ações" + +msgid "Task Status" +msgstr "Status da tarefa" + +msgid "Sent Time" +msgstr "Tempo de envio" + +msgid "There are no tasks to be sent!" +msgstr "Não há tarefas a enviar!" + +msgid "No historical tasks!" +msgstr "Nenhuma tarefa no histórico!" + +msgid "Upgrading" +msgstr "Atualizando" + +msgid "syncing" +msgstr "sincronizando" + +msgid "Printing Finish" +msgstr "Impressão finalizada" + +msgid "Printing Failed" +msgstr "Falha na Impressão" + +msgid "Printing Pause" +msgstr "Pausa de Impressão" + +msgid "Pending" +msgstr "Pendente" + +msgid "Sending" +msgstr "Enviando" + +msgid "Sending Finish" +msgstr "Envio Finalizado" + +msgid "Sending Cancel" +msgstr "Cancelar Envio" + +msgid "Sending Failed" +msgstr "Falha no Envio" + +msgid "Print Success" +msgstr "Impressão Bem Sucedida" + +msgid "Print Failed" +msgstr "Impressão Falhou" + +msgid "Removed" +msgstr "Removido" + +msgid "Don't remind me again" +msgstr "Não me avise novamente" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "Nenhuma outra janela pop-up será exibida. Você pode reabri-la em " +"'Preferências'." + +msgid "Filament-Saving Mode" +msgstr "Modo Economia de Filamento" + +msgid "Convenience Mode" +msgstr "Modo Conveniência" + +msgid "Custom Mode" +msgstr "Modo Customizado" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" +"Gera agrupamento de filamentos para os bicos esquerdo e direito com base nos princípios de máxima economia de filamento para minimizar o desperdício." + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" +"Gera o agrupamento de filamentos para os bicos esquerdo e direito com base " +"no estado real do filamento na impressora, reduzindo a necessidade de ajustes " +"manuais." + +msgid "Manually assign filament to the left or right nozzle" +msgstr "Atribuir manualmente o filamento ao bico esquerdo ou direito" + +msgid "Global settings" +msgstr "Definições globais" + +msgid "Learn more" +msgstr "Saber mais" + +msgid "(Sync with printer)" +msgstr "(Sinc. com impressora)" + +msgid "We will slice according to this grouping method:" +msgstr "Vamos fatiar de acordo com este método de agrupamento:" + +msgid "Tips: You can drag the filaments to reassign them to different nozzles." +msgstr "" +"Dica: Você pode arrastar os filamentos para reatribuí-los a diferentes bicos." + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" +"O método de agrupamento de filamentos para a placa atual é determinado pela " +"opção no botão de fatiamento da placa." msgid "Connected to Obico successfully!" msgstr "Conectado ao Obico com sucesso!" @@ -16466,7 +21052,7 @@ msgid "Could not connect to SimplyPrint" msgstr "Não é possível conectar a SimplyPrint" msgid "Internal error" -msgstr "" +msgstr "Erro interno" msgid "Unknown error" msgstr "Erro desconhecido" @@ -16476,11 +21062,11 @@ msgstr "" "Conta SimplyPrint não vinculada. Vá para as opções de conexão para configurá-" "la." -msgid "Connection to Flashforge works correctly." -msgstr "A conexão com a Flashforge está funcionando corretamente." +msgid "Serial connection to Flashforge is working correctly." +msgstr "A conexão serial com a Flashforge está funcionando corretamente." -msgid "Could not connect to Flashforge" -msgstr "Não é possível conectar a Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "Não foi possível conectar via serial com a Flashforge" msgid "The provided state is not correct." msgstr "O estado fornecido não está correto." @@ -16493,8 +21079,116 @@ msgid "Something unexpected happened when trying to log in, please try again." msgstr "" "Algo inesperado aconteceu ao tentar conectar, por favor tente novamente." -msgid "User cancelled." -msgstr "O usuário cancelou." +msgid "User canceled." +msgstr "Cancelado pelo usuário." + +msgid "Head diameter" +msgstr "Diâmetro da cabeça" + +msgid "Max angle" +msgstr "Ângulo máx" + +msgid "Detection radius" +msgstr "Raio de detecção" + +msgid "Remove selected points" +msgstr "Remover pontos selecionados" + +msgid "Remove all" +msgstr "Remover tudo" + +msgid "Auto-generate points" +msgstr "Pontos gerados automaticamente" + +msgid "Add a brim ear" +msgstr "Adicionar orelha da borda" + +msgid "Delete a brim ear" +msgstr "Remover orelha da borda" + +msgid "Adjust head diameter" +msgstr "Ajustar diâmetro da cabeça" + +msgid "Adjust section view" +msgstr "Ajustar vista de seção" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Aviso: O tipo de borda não estiver definido como \"pintada\", as orelhas da " +"borda não terão efeito!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Definir o tipo de borda deste objeto como \"pintada\"" + +msgid " invalid brim ears" +msgstr " orelhas da borda iválidas" + +msgid "Brim Ears" +msgstr "Orelhas da Borda" + +msgid "Please select single object." +msgstr "Por favor selecione um único objeto." + +msgid "Zoom Out" +msgstr "Afastar Zoom" + +msgid "Zoom In" +msgstr "Aproximar Zoom" + +msgid "Load skipping objects information failed. Please try again." +msgstr "Falha ao carregar ignorando as informações dos objetos. Tente novamente." + +msgid "Loading ..." +msgstr "Carregando…" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "/%d Selecionados" + +msgid "Nothing selected" +msgstr "Nada selecionado" + +msgid "Over 64 objects in single plate" +msgstr "Mais de 64 objetos em uma única placa" + +msgid "The current print job cannot be skipped" +msgstr "O trabalho de impressão atual não pode ser ignorado" + +msgid "Skipping all objects." +msgstr "Ignorando todos os objetos." + +msgid "The printing job will be stopped. Continue?" +msgstr "O trabalho de impressão será interrompido. Continuar?" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "Ignorando %d objetos." + +msgid "This action cannot be undone. Continue?" +msgstr "Esta ação não pode ser desfeita. Continuar?" + +msgid "Skipping objects." +msgstr "Ignorando objetos." + +msgid "Continue" +msgstr "Continue" + +msgid "Select Filament" +msgstr "Selecionar Filamento" + +msgid "Null Color" +msgstr "Cor Nula" + +msgid "Multiple Color" +msgstr "Múltiplas Cores" + +msgid "Official Filament" +msgstr "Filamento Oficial" + +msgid "More Colors" +msgstr "Mais Cores" #: resources/data/hints.ini: [hint:Precise wall] msgid "" @@ -16503,8 +21197,8 @@ msgid "" "consistency?" msgstr "" "Parede precisa\n" -"Você sabia que ativar o Perímetro Preciso pode melhorar a precisão e a " -"consistência da camada?" +"Você sabia que ativar o Parede Precisa pode melhorar a precisão e a " +"consistência de camada?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" @@ -16516,7 +21210,7 @@ msgstr "" "Modo sanduíche\n" "Você sabia que pode usar o modo sanduíche (interno-externo-interno) para " "melhorar a precisão e a consistência da camada se o seu modelo não tiver " -"overhangs muito íngremes?" +"saliências muito íngremes?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" @@ -16568,14 +21262,14 @@ msgid "" "pressing the Tab key." msgstr "" "Alternar espaços de trabalho\n" -"Você pode alternar entre os espaços de trabalho Preparar e " -"Visualizar pressionando a tecla Tab." +"Você pode alternar entre os espaços de trabalho Preparar e Pré-" +"visualizar pressionando a tecla Tab." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Como usar atalhos de teclado\n" "Você sabia que o Snapmaker Orca oferece uma ampla gama de atalhos de teclado e " @@ -16587,9 +21281,9 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" -"Inverter em ímpar\n" -"Você sabia que a função Inverter em ímpar pode melhorar " -"significativamente a qualidade da superfície dos overhangs?" +"Reverter em ímpar\n" +"Você sabia que a função Reverter em ímpar pode melhorar " +"significativamente a qualidade da superfície das saliências?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16622,20 +21316,20 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Auto-arranjo\n" -"Você sabia que pode auto-posicionar todos os objetos em seu projeto?" +"Você sabia que pode arranjar automaticamente todos os objetos em seu projeto?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Auto-orientar\n" -"Você sabia que pode girar objetos para uma orientação ideal para impressão " -"com um simples clique?" +"Você sabia que pode rotacionar objetos para uma orientação ideal para " +"impressão com um simples clique?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" @@ -16646,7 +21340,7 @@ msgid "" msgstr "" "Apoiar face à superfície\n" "Você sabia que pode rapidamente orientar um modelo para que uma de suas " -"faces fique sobre a base de impressão? Selecione a função \"Apoiar na face\" " +"faces fique sobre a mesa de impressão? Selecione a função \"Apoiar na face\" " "ou pressione a tecla F." #: resources/data/hints.ini: [hint:Object List] @@ -16723,7 +21417,7 @@ msgstr "" "STEP\n" "Você sabia que pode melhorar a qualidade da impressão fatiando um arquivo " "STEP ao invés de um STL?\n" -"Snapmaker Orca é compatível com arquivos STEP, gerando resultados mais suaves " +"O Snapmaker Orca é compatível com arquivos STEP, gerando resultados mais suaves " "do que um STL em baixa resolução. Tente!" #: resources/data/hints.ini: [hint:Z seam location] @@ -16757,10 +21451,10 @@ msgid "" "individual plates ready to print? This will simplify the process of keeping " "track of all the parts." msgstr "" -"Divida suas impressões em mesas\n" -"Você sabia que pode dividir um modelo que tem diversas peças individuais em " -"mesas distintas prontas para imprimir? Isso vai simplificar o processo e o " -"avanço das impressões." +"Divida suas impressões em placas\n" +"Você sabia que pode dividir um modelo que tem diversas peças em placas " +"individuais distintas prontas para imprimir? Isso simplifica o processo de " +"manter o controle de todas as peças." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] @@ -16812,7 +21506,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Borda para melhor adesão\n" @@ -16823,7 +21517,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Definir parâmetros para vários objetos\n" "Você sabia que pode definir parâmetros de fatiamento para todos os objetos " @@ -16840,8 +21534,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Purga no suporte/objetos/preenchimento\n" "Você sabia que pode economizar o filamento desperdiçado ao purgar nos " @@ -16854,21 +21548,21 @@ msgid "" "density to improve the strength of the model?" msgstr "" "Melhorar a resistência\n" -"Você sabia que pode usar mais loops de perímetro e densidade de " -"preenchimento não sólido mais alta para melhorar a resistência do modelo?" +"Você sabia que pode usar mais voltas de parede e maior densidade de " +"preenchimento esparso mais alta para melhorar a resistência do modelo?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"Quando é necessário imprimir com a porta da impressora aberta\n" +"Quando é necessário imprimir com a porta da impressora aberta?\n" "Você sabia que abrir a porta da impressora pode reduzir a probabilidade de " -"entupimento do extrusor/bico aquecido ao imprimir filamento de temperatura " -"mais baixa com uma temperatura de invólucro mais alta. Mais informações " +"entupimento da extrusora/bico aquecido ao imprimir filamento de temperatura " +"mais baixa com uma temperatura de invólucro mais alta? Mais informações " "sobre isso na Wiki." #: resources/data/hints.ini: [hint:Avoid warping] @@ -16876,13 +21570,1162 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Evitar empenamento\n" "Você sabia que ao imprimir materiais propensos ao empenamento, como ABS, " "aumentar adequadamente a temperatura da mesa aquecida pode reduzir a " "probabilidade de empenamento?" +#~ msgid "Junction Deviation calibration" +#~ msgstr "Calibração do Desvio de Junção" + +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Extrusora %d" + +#~ msgid "" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" +#~ msgstr "" +#~ "Desvio de junção máximo (M205 J, aplicável apenas se JD > 0 para Firmware " +#~ "Marlin)" + +#~ msgid "Adaptive layer height" +#~ msgstr "Altura de camada adaptativa" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Ativar essa opção significa que a altura da camada de suporte de árvore, " +#~ "exceto a primeira, será calculada automaticamente." + +#~ msgid "Junction Deviation test" +#~ msgstr "Teste de Desvio de Junção" + +#~ msgid "Start junction deviation: " +#~ msgstr "Iniciar desvio de junção: " + +#~ msgid "End junction deviation: " +#~ msgstr "Finalizar desvio de junção: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Configurações de Desvio de Junção" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "" +#~ "Nota: Valores mais baixos = cantos mais nítidos, mas velocidades mais " +#~ "lentas" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" +#~ msgstr "" +#~ "Por favor insira valores válidos:\n" +#~ "(0 <= Desvio de Junção < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "NOTA: Valores altos podem causar Deslocamento de Camadas" + +#~ msgid "AMS not connected" +#~ msgstr "AMS não conectado" + +#~ msgid "Ext Spool" +#~ msgstr "Carretel Externo" + +#~ msgid "Guide" +#~ msgstr "Guia" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Calibrando AMS…" + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Ocorreu um problema durante a calibração. Clique para ver a solução." + +#~ msgid "Calibrate again" +#~ msgstr "Calibrar novamente" + +#~ msgid "Cancel calibration" +#~ msgstr "Cancelar calibração" + +#~ msgid "Feed Filament" +#~ msgstr "Alimentar Filamento" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Um cartão SD precisa ser inserido antes de imprimir via LAN." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "" +#~ "Um cartão SD precisa ser inserido antes de enviar para a impressora." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Nota: Apenas os espaços do AMS carregados com o mesmo tipo de material " +#~ "podem ser selecionadas." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Se houver dois filamentos idênticos no AMS, o backup de filamento do AMS " +#~ "será ativado.\n" +#~ "(Funciona atualmente com recarga automática de filamentos da mesma marca, " +#~ "tipo de material e cor)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "O AMS irá estimar a capacidade restante do filamento Bambu após as " +#~ "informações do filamento serem atualizadas. Durante a impressão, a " +#~ "capacidade restante será atualizada automaticamente." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "A temperatura mínima recomendada é inferior a 190°C ou a temperatura " +#~ "máxima recomendada é superior a 300°C.\n" + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Modo mecânico de varredura XY" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausado devido ao esgotamento do filamento" + +#~ msgid "Heating hotend" +#~ msgstr "Aquecendo a hotend" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Calibrando a extrusão" + +#~ msgid "Printing was paused by the user" +#~ msgstr "A impressão foi pausada pelo usuário" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Pausa de queda da cobertura frontal" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Calibrando o fluxo de extrusão" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pausado devido a mau funcionamento da temperatura do bico" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pausado devido a mau funcionamento da temperatura da mesa quente" + +#~ msgid "Skip step pause" +#~ msgstr "Pausa de passo pulado" + +#~ msgid "Motor noise calibration" +#~ msgstr "Calibração de ruído do motor" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pausado devido à perda do AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Pausado devido a baixa velocidade do ventilador do bloco de aquecimento" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pausado devido a erro no controle de temperatura da câmara" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pausado pelo G-code inserido pelo usuário" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Pausado devido a bico coberto por filamento" + +#~ msgid "Cutter error pause" +#~ msgstr "Pausa de erro de corte" + +#~ msgid "First layer error pause" +#~ msgstr "Pausa de erro na primeira camada" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Pausa de obstrução do bico" + +#~ msgid "Fatal" +#~ msgstr "Fatal" + +#~ msgid "Serious" +#~ msgstr "Grave" + +#~ msgid "Common" +#~ msgstr "Comum" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "A temperatura atual da câmara ou a temperatura da câmara alvo excede 45℃. " +#~ "Para evitar obstrução da extrusora, não é permitido carregar filamento de " +#~ "baixa temperatura (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Filamento de baixa temperatura (PLA/PETG/TPU) está carregado na " +#~ "extrusora. Para evitar obstrução da extrusora, não é permitido ajustar a " +#~ "temperatura da câmara acima de 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF não é suportado pelo AMS." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Você pode encontrá-lo em \"Configurações > Rede > Código de Conexão\"\n" +#~ "na impressora, conforme mostrado na figura:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Procurar arquivo no cartão SD não é suportado no firmware atual. Por " +#~ "favor, atualize o firmware da impressora." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Por favor verifique se o cartão SD está inserido na impressora.\n" +#~ "Se ele ainda não puder ser lido, você pode tentar formatar o cartão SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "Procurar arquivo no cartão SD não é suportado no Modo Somente LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Armazenamento indisponível, insira um cartão SD." + +#~ msgid "Cham" +#~ msgstr "Filhote" + +#~ msgid "Still unload" +#~ msgstr "Ainda descarregando" + +#~ msgid "Still load" +#~ msgstr "Ainda carregando" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Não é possível iniciar sem um cartão SD." + +#~ msgid "Update" +#~ msgstr "Atualizar" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Sensibilidade da pausa é" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Sem filamentos AMS. Por favor, selecione uma impressora na página " +#~ "'Dispositivo' para carregar informações AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Sincronizar filamentos com AMS eliminará todas as predefinições de " +#~ "filamento e cores selecionadas atualmente. Deseja continuar?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Já foi feita uma sincronização, deseja sincronizar apenas as alterações " +#~ "ou ressincronizar tudo?" + +#~ msgid "Sync" +#~ msgstr "Sincronizar" + +#~ msgid "Resync" +#~ msgstr "Ressincronizar" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Alguns filamentos desconhecidos foram mapeados para a predefinição " +#~ "genérica. Por favor, atualize o Snapmaker Orca ou reinicie o Snapmaker Orca para " +#~ "verificar se há uma atualização para as predefinições do sistema." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Você tem certeza de que deseja armazenar os SVGs originais com seus " +#~ "caminhos locais no arquivo 3MF?\n" +#~ "Se pressionar 'NÃO', todos os SVGs no projeto não serão mais editáveis." + +#~ msgid "Private protection" +#~ msgstr "Proteção privada" + +#~ msgid "General Settings" +#~ msgstr "Configurações Gerais" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Mostrar notificação \"Dica do dia\" após o início" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Se ativado, dicas úteis são exibidas na inicialização." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Volumes de Purga: Auto-calcular toda vez que a cor mudar." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Se ativado, auto-calcular toda vez que a cor mudar." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "Volumes de Purga: Auto-calcular toda vez que a cor mudar." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "Se ativo, auto-calcular toda vez que a cor mudar" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Organizar automaticamente a placa após a clonagem de objeto" + +#~ msgid "Network" +#~ msgstr "Rede" + +#~ msgid "User Sync" +#~ msgstr "Sincronização do Usuário" + +#~ msgid "System Sync" +#~ msgstr "Sincronização do Sistema" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Associar URLs ao Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "cada" + +#~ msgid "Downloads" +#~ msgstr "Transferências" + +#~ msgid "Dark Mode" +#~ msgstr "Modo Escuro" + +#~ msgid "Home page and daily tips" +#~ msgstr "Página inicial e dicas diárias" + +#~ msgid "Show home page on startup" +#~ msgstr "Mostrar página inicial na inicialização" + +#~ msgid "Please choose the filament color" +#~ msgstr "Por favor, escolha a cor do filamento" + +#~ msgid "Send print job to" +#~ msgstr "Enviar trabalho de impressão para" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "O filamento %s excede o número de espaços do AMS. Por favor, atualize o " +#~ "firmware da impressora para suportar a atribuição de espaços AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "O filamento excede o número de espaços do AMS. Por favor, atualize o " +#~ "firmware da impressora para suportar a atribuição de espaços AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Foram estabelecidos mapeamentos de filamentos para espaços do AMS. Você " +#~ "pode clicar em um filamento acima para mudar seu espaço do AMS mapeado" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Por favor, clique em cada filamento acima para especificar seu espaço do " +#~ "AMS mapeado antes de enviar o trabalho de impressão" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "O firmware da impressora só suporta mapeamento sequencial de filamento => " +#~ "espaço do AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Um cartão SD precisa ser inserido antes de imprimir." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Um cartão SD precisa ser inserido para gravar o timelapse." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "bico na predefinição: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "bico memorizado: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Seu diâmetro de bico no arquivo fatiado não é consistente com o bico " +#~ "memorizado. Se você mudou seu bico recentemente, vá para Dispositivo > " +#~ "Partes da impressora para alterar as configurações." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Imprimir material de temperatura alta (material %s) com %s poderá causar " +#~ "danos ao bico" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Conectando à impressora. Não é possível cancelar durante o processo de " +#~ "conexão." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Cuidado ao usar! A calibração de fluxo na Placa PEI Texturizada pode " +#~ "falhar devido à superfície irregular." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Calibração automática de fluxo usando Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Enviar para o cartão SD da impressora" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Um cartão SD precisa ser inserido antes de enviar para o cartão SD da " +#~ "impressora." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "A impressora não suporta enviar para o cartão SD da impressora." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "A quantidade de cores deve estar na faixa [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Cores de filamento atuais:" + +#~ msgid "Quick set:" +#~ msgstr "Definição rápida:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Adicione a extrusora consumível após extrusoras existentes." + +#~ msgid "Cluster colors" +#~ msgstr "Agrupar cores" + +#~ msgid "Map Filament" +#~ msgstr "Mapear Filamento" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Nota: a cor foi selecionada, você pode escolher OK \n" +#~ "para continuar ou ajustá-la manualmente." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Aviso: A contagem de extrusoras \n" +#~ "novas e atuais excede 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Auto-Calc" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "O Orca recalculará seus volumes de purga toda vez que a cor dos " +#~ "filamentos for alterada. Você pode desativar o cálculo automático em " +#~ "Snapmaker Orca > Preferências" + +#~ msgid "unloaded" +#~ msgstr "descarregado" + +#~ msgid "loaded" +#~ msgstr "carregado" + +#~ msgid "Filament #" +#~ msgstr "Filamento #" + +#~ msgid "From" +#~ msgstr "De" + +#~ msgid "To" +#~ msgstr "Para" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Retomar Impressão (defeitos aceitáveis)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Retomar Impressão (problema resolvido)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Passo 1. Confirme se o Snapmaker Orca e sua impressora estão na mesma LAN." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Passo 2. Se o IP e o Código de Acesso abaixo forem diferentes dos valores " +#~ "reais da sua impressora, por favor corrija-os." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Passo 3. Obtenha o SN do dispositivo na impressora; ele geralmente é " +#~ "encontrado nas informações do dispositivo na tela da impressora." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " está muito perto de outros, pode haver colisões durante a impressão." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Não é possível imprimir juntos vários filamentos que têm grande diferença " +#~ "de temperatura. Caso contrário, a extrusora e bico podem ficar bloqueados " +#~ "ou danificados durante a impressão." + +#~ msgid "Ironing angle" +#~ msgstr "Ângulo do passar a ferro" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "O ângulo em que o passar a ferro é feito. Um número negativo desativa " +#~ "essa função e usa o método padrão." + +#~ msgid "Remove small overhangs" +#~ msgstr "Remover pequenas saliências" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Remova pequenas saliências que possivelmente não precisam de suporte." + +#~ msgid "Width of the brim." +#~ msgstr "Largura da borda." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Apenas um dos resultados com o mesmo nome será salvo. Tem certeza de que " +#~ "deseja sobrescrever os outros resultados?" + +#~ msgid "External Spool" +#~ msgstr "Carretel Externo" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Por favor insira valores válidos:\n" +#~ "Temp. inicial: <= 350\n" +#~ "Temp. final: >= 170\n" +#~ "Temp. inicial > Temp. final + 5" + +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Recomendado: Defina o Amortecimento como 0.\n" +#~ "Isso usará o valor padrão da impressora ou o último valor salvo." + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "A impressora ou modelo personalizado não foi colocado." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "bico na predefinição: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "O diâmetro do bico na sua predefinição não está consistente com o " +#~ "diâmetro do bico memorizado. Você mudou seu bico recentemente?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*Imprimir material %s com %s pode causar danos ao bico" + +#~ msgid "Enable filament ramming." +#~ msgstr "Ativar moldeamento de ponta de filamento." + +#~ msgid "Recent projects" +#~ msgstr "Projetos recentes" + +#~ msgid "Maximum recent projects" +#~ msgstr "Máximo de projetos recentes" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Contagem máxima de projetos recentes" + +#~ msgid "" +#~ "This parameter adds a rotation of sparse infill direction to each layer " +#~ "according to the specified template. The template is a comma-separated " +#~ "list of angles in degrees, e.g. '0,90'. The first angle is applied to the " +#~ "first layer, the second angle to the second layer, and so on. If there " +#~ "are more layers than angles, the angles will be repeated. Note that not " +#~ "all sparse infill patterns support rotation." +#~ msgstr "" +#~ "Este parâmetro adiciona uma rotação na direção do preenchimento esparso a " +#~ "cada camada, de acordo com o gabarito especificado. O gabarito é uma " +#~ "lista de ângulos em graus separados por vírgulas, por exemplo, '0,90'. O " +#~ "primeiro ângulo é aplicado à primeira camada, o segundo ângulo à segunda " +#~ "camada e assim por diante. Se houver mais camadas do que ângulos, os " +#~ "ângulos serão repetidos. Observe que nem todos os padrões de " +#~ "preenchimento esparso suportam rotação." + +#~ msgid "Set Position" +#~ msgstr "Definir Posição" + +#~ msgid "Color Scheme" +#~ msgstr "Esquema de Cores" + +#~ msgid "Percent" +#~ msgstr "Porcentagem" + +#~ msgid "Used filament" +#~ msgstr "Fil. usado" + +#~ msgid "More..." +#~ msgstr "Mais…" + +#~ msgid "More calibrations" +#~ msgstr "Mais calibrações" + +#~ msgid "SD Card" +#~ msgstr "Cartão SD" + +#~ msgid "No SD Card" +#~ msgstr "Sem Cartão SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Cartão SD Anormal" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "A ejeção do dispositivo %s (%s) falhou." + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Esta opção pode ser alterada depois nas preferências, em 'Comportamento " +#~ "de Carregamento'." + +#~ msgid "Invalid number" +#~ msgstr "Número inválido" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "bico memorizado: %.2f %s" + +#~ msgid "Ramming settings" +#~ msgstr "Configurações de moldeamento" + +#~ msgid "Profile dependencies" +#~ msgstr "Dependências de perfil" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "o pacote de configuração é incompatível com o APP atual." + +#~ msgid "Total ramming time" +#~ msgstr "Tempo total de moldeamento" + +#~ msgid "Total rammed volume" +#~ msgstr "Volume total de moldeamento de extremidade" + +#~ msgid "Ramming line width" +#~ msgstr "Largura da linha de moldeamento" + +#~ msgid "Ramming line spacing" +#~ msgstr "Espaçamento da linha de moldeamento" + +#~ msgid "resume" +#~ msgstr "retomar" + +#~ msgid "Classic mode" +#~ msgstr "Modo clássico" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Ative esta opção para usar o modo clássico." + +#~ msgid "Compatible machine" +#~ msgstr "Máquina compatível" + +#~ msgid "Compatible machine condition" +#~ msgstr "Condição de máquina compatível" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Condição de perfis de processo compatíveis" + +#~ msgid "Default filament color" +#~ msgstr "Cor padrão do filamento" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Rotaciona a direção do preenchimento sólido" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Rotaciona a direção do preenchimento em 90° para cada camada." + +#~ msgid "Retract on top layer" +#~ msgstr "Retração na camada superior" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Forçar uma retração na camada superior. Desabilitar pode evitar obstrução " +#~ "em padrões muito lentos com pequenos movimentos, como a curva de Hilbert." + +#~ msgid "Speed of retractions." +#~ msgstr "Velocidade das retrações." + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Velocidade para recarregar o filamento na extrusora. Zero significa mesma " +#~ "velocidade da retração." + +#~ msgid "Single loop draft shield" +#~ msgstr "Escudo de ar de uma volta" + +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Espessura mínima de elementos finos. Elementos do modelo que são mais " +#~ "finos do que este valor não serão impressos, enquanto elementos mais " +#~ "espessos que esse valor serão alargados até a largura mínima da parede. É " +#~ "expresso como uma porcentagem sobre o diâmetro do bico." + +#~ msgid "step: " +#~ msgstr "passo: " + +#~ msgid "Back Page 1" +#~ msgstr "Voltar à Página 1" + +#~ msgid "Delete Filament" +#~ msgstr "Excluir Filamento" + +#~ msgid "Refresh Printers" +#~ msgstr "Atualizar Impressoras" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Adicionamos um estilo experimental \"Tree Slim\" que apresenta um volume " +#~ "de suporte menor, mas uma resistência mais fraca.\n" +#~ "Recomendamos usar com: 0 camadas de interface, 0 distância superior, 2 " +#~ "paredes." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Para os estilos \"Tree Strong\" e \"Tree Hybrid\", recomendamos as " +#~ "seguintes configurações: pelo menos 2 camadas de interface, pelo menos " +#~ "0.1mm de distância superior em z ou uso de materiais de suporte na " +#~ "interface." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Diâmetro da Ramificação com parede dupla" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Ramificações com área maior do que a área de um círculo com este diâmetro " +#~ "serão impressas com paredes duplas para estabilidade. Defina este valor " +#~ "como zero para não ter paredes duplas." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "" +#~ "Esta configuração especifica a contagem de paredes ao redor do suporte" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Suporte: gerar caminho da ferramenta na camada %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Suporte: detectar saliências" + +#~ msgid "Support: propagate branches" +#~ msgstr "Suporte: propagar ramificações" + +#~ msgid "Support: draw polygons" +#~ msgstr "Suporte: desenhar polígonos" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Suporte: gerar caminho da ferramenta" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Suporte: gerar polígonos na camada %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Suporte: corrigir buracos na camada %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Suporte: propagar ramificações na camada %d" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Inicialização falhou (Conexão do dispositivo não está pronta)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "Inicialização falhou (falha no armazenamento, insira o cartão SD.)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Falha na conexão LAN (enviando arquivo de impressão)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Passo 1, por favor confirme se o Snapmaker Orca e sua impressora estão na " +#~ "mesma LAN." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Passo 2, se o IP e o Código de Acesso abaixo forem diferentes dos valores " +#~ "reais na sua impressora, corrija-os." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Passo 3: Pingue o endereço IP para verificar a perda de pacotes e a " +#~ "latência." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Forçar resfriamento para saliências e pontes" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Ative esta opção para otimizar a velocidade do ventilador de resfriamento " +#~ "de peças para saliência e ponte para obter melhor resfriamento" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Velocidade do ventilador para saliência" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Forçar o ventilador de resfriamento de peças a ser nesta velocidade ao " +#~ "imprimir ponte ou parede saliente que tenha um grande grau de saliência. " +#~ "Forçar o resfriamento para saliência e ponte pode obter melhor qualidade " +#~ "para estas partes" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Limiar de resfriamento de saliência" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Forçar o ventilador de resfriamento a ser uma velocidade específica " +#~ "quando o grau de saliência das peças impressa excede este valor. Expresso " +#~ "como porcentagem, que indica quanto da largura da linha sem suporte da " +#~ "camada inferior. Zero significa forçar o resfriamento para toda a parede " +#~ "externa, não importa quanto seja o grau de saliência" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Densidade de pontes externas. 100% significa ponte sólida. O padrão é " +#~ "100%." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "A velocidade de impressão mínima para a qual a impressora diminuirá a " +#~ "velocidade para tentar manter o tempo mínimo de camada acima, quando a " +#~ "desaceleração para um melhor resfriamento da camada estiver habilitada." + +#~ msgid "Reverse on odd" +#~ msgstr "Reverter em ímpares" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Extrudar perímetros que tenham uma parte sobre uma saliência, na direção " +#~ "reversa em camadas ímpares. Este padrão alternado pode melhorar " +#~ "drasticamente saliências íngremes.\n" +#~ "\n" +#~ "Este ajuste também pode ajudar a reduzir a deformação das peças devido à " +#~ "redução das tensões nas paredes da peça." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Aplicar a lógica de perímetros reversos apenas em perímetros internos.\n" +#~ "\n" +#~ "Este ajuste reduz muito as tensões na peça, já que agora são distribuídas " +#~ "em direções alternadas. Isso deve reduzir a deformação das peças, " +#~ "mantendo a qualidade da parede externa. Este recurso pode ser muito útil " +#~ "para materiais propensos a deformações, como ABS/ASA, e também para " +#~ "filamentos elásticos, como TPU e Silk PLA. Também pode ajudar a reduzir a " +#~ "deformação em regiões salientes sobre suportes.\n" +#~ "\n" +#~ "Para que este ajuste seja mais eficaz, recomenda-se definir o Limiar " +#~ "Reverso como 0 para que todas as paredes internas sejam impressos em " +#~ "direções alternadas em camadas ímpares, independentemente de seu grau de " +#~ "saliência." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Número de milímetros que a saliência precisa ter para que a reversão seja " +#~ "considerada útil. Pode ser um % da largura do perímetro.\n" +#~ "O valor 0 permite a reversão em todas as camadas ímpares " +#~ "independentemente." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Ao imprimir por Objeto, a extrusora pode colidir com a saia.\n" +#~ "Portanto, redefina a camada da saia para 1 para evitar isso." + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Ajuste este valor para evitar que paredes curtas e não fechadas sejam " +#~ "impressas, o que poderia aumentar o tempo de impressão. Valores mais " +#~ "altos removem paredes mais longas.\n" +#~ "\n" +#~ "NOTA: As superfícies inferior e superior não serão afetadas por este " +#~ "valor para evitar lacunas visuais no exterior do modelo. Ajuste o 'Limiar " +#~ "de uma parede' nas configurações avançadas abaixo para ajustar a " +#~ "sensibilidade do que é considerado uma superfície superior. 'Limiar de " +#~ "uma parede' só é visível se esta configuração estiver acima do valor " +#~ "padrão de 0,5, ou se superfícies superiores de parede única estiverem " +#~ "habilitadas." + +#~ msgid "Shrinkage" +#~ msgstr "Retração" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Diminua ligeiramente este valor (por exemplo, 0.9) para reduzir a " +#~ "quantidade de material para ponte, para melhorar a flacidez" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Este valor governa a espessura da camada interna da ponte. Esta é a " +#~ "primeira camada sobre o preenchimento esparso . Diminua ligeiramente este " +#~ "valor (por exemplo, 0.9) para melhorar a qualidade da superfície sobre o " +#~ "preenchimento esparso." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Este fator afeta a quantidade de material para o preenchimento sólido " +#~ "superior. Você pode diminuí-lo ligeiramente para ter um acabamento de " +#~ "superfície suave" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "" +#~ "Este fator afeta a quantidade de material para o preenchimento sólido " +#~ "inferior" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Ative esta opção para diminuir a velocidade de impressão em áreas onde " +#~ "podem existir potenciais perímetros curvados (warping)" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Velocidade de ponte e paredes completamente salientes" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Velocidade da ponte interna. Se o valor for expresso como porcentagem, " +#~ "será calculado com base na velocidade da ponte. O valor padrão é 150%." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tempo para carregar novo filamento ao trocar de filamento. Apenas para " +#~ "estatística." + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Tempo para descarregar o filamento antigo ao trocar de filamento. Apenas " +#~ "para estatística." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tempo para o firmware da impressora (ou a Unidade de Material Multi 2.0) " +#~ "carregar um novo filamento durante uma troca de ferramenta (ao executar o " +#~ "código T). Este tempo é adicionado ao tempo total de impressão pelo " +#~ "estimador de tempo do G-code." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Tempo para o firmware da impressora (ou a Unidade de Material Multi 2.0) " +#~ "descarregar um filamento durante uma troca de ferramenta (ao executar o " +#~ "código T). Este tempo é adicionado ao tempo total de impressão pelo " +#~ "estimador de tempo do G-code." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Filtrar vazios menores que o limiar especificado" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Ative esta opção para controle de temperatura da câmara. Um comando M191 " +#~ "será adicionado antes de \"machine_start_gcode\"\n" +#~ "Comandos G-code: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Uma temperatura mais alta na câmara pode ajudar a suprimir ou reduzir o " +#~ "empenamento e potencialmente levar a uma maior resistência de ligação " +#~ "entre camadas para materiais de alta temperatura como ABS, ASA, PC, PA e " +#~ "assim por diante. Ao mesmo tempo, a filtragem de ar de ABS e ASA ficará " +#~ "pior. Para PLA, PETG, TPU, PVA e outros materiais de baixa temperatura, a " +#~ "temperatura real da câmara não deve ser alta para evitar obstruções, " +#~ "portanto, é altamente recomendável usar 0, que significa desligado" + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Diâmetros de bico diferentes e diâmetros de filamento diferentes não são " +#~ "permitidos quando a torre de preparo está ativa." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "A prevenção de vazamento atualmente não é suportada com a torre de prepao " +#~ "ativa." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Profundidade de intertravamento de uma região segmentada. Zero desativa " +#~ "essa funcionalidade." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Extrusora da torre de limpeza" + #~ msgid "Current association: " #~ msgstr "Associação atual: " @@ -16927,86 +22770,13 @@ msgstr "" #~ "seu arquivo através do painel." #~ msgid "Please input a valid value (K in 0~0.3)" -#~ msgstr "Por favor, insira um valor válido (K entre 0~0.3)" +#~ msgstr "Por favor insira um valor válido (K entre 0~0.3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Por favor, insira um valor válido (K entre 0~0.3, N entre 0.6~2.0))" - -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Selecione as impressoras conectadas (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Selecionar as impressoras conectadas (%d/6)" +#~ msgstr "Por favor insira um valor válido (K entre 0~0.3, N entre 0.6~2.0))" #~ msgid "PrintingPause" #~ msgstr "Pausa na Impressão" #~ msgid "Printer local connection failed, please try again." -#~ msgstr "Falha na conexão local da impressora, por favor, tente novamente." - -#~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." -#~ msgstr "" -#~ "Encontre os detalhes da Calibração de Dinâmica de Fluxo na nossa wiki.\n" -#~ "\n" -#~ "Normalmente, a calibração não é necessária. Quando você inicia uma " -#~ "impressão de cor/material única, com a opção \"calibração de dinâmica de " -#~ "fluxo\" ativada no menu de início da impressão, a impressora seguirá o " -#~ "método antigo, calibrando o filamento antes da impressão; Quando você " -#~ "inicia uma impressão de cor/material múltipla, a impressora usará o " -#~ "parâmetro de compensação padrão para o filamento durante cada troca de " -#~ "filamento, o que resultará em um bom resultado na maioria dos casos.\n" -#~ "\n" -#~ "Por favor, note que existem alguns casos que podem tornar o resultado da " -#~ "calibração não confiável: usar uma mesa texturizada para fazer a " -#~ "calibração; a mesa não tem boa adesão (por favor, lave a mesa ou aplique " -#~ "cola!) ... Você pode encontrar mais informações em nossa wiki.\n" -#~ "\n" -#~ "Os resultados da calibração têm cerca de 10 por cento de oscilação em " -#~ "nossos testes, o que pode fazer com que o resultado não seja exatamente o " -#~ "mesmo em cada calibração. Ainda estamos investigando a causa raiz para " -#~ "fazer melhorias com novas atualizações." - -#~ msgid "" -#~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" -#~ msgstr "" -#~ "Apenas um dos resultados com o mesmo nome será salvo. Você tem certeza de " -#~ "que deseja substituir os outros resultados?" - -#, c-format, boost-format -#~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" -#~ msgstr "" -#~ "Já existe um resultado de calibração histórico com o mesmo nome: %s. " -#~ "Apenas um dos resultados com o mesmo nome é salvo. Você tem certeza de " -#~ "que deseja substituir o resultado histórico?" - -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "Por favor, encontre o canto com o grau perfeito de extrusão" - -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "A" +#~ msgstr "Falha na conexão local da impressora, por favor tente novamente." \ No newline at end of file diff --git a/localization/i18n/ru/Snapmaker_Orca_ru.po b/localization/i18n/ru/Snapmaker_Orca_ru.po index 19282409ba..c0314d062c 100644 --- a/localization/i18n/ru/Snapmaker_Orca_ru.po +++ b/localization/i18n/ru/Snapmaker_Orca_ru.po @@ -5,10 +5,10 @@ # msgid "" msgstr "" -"Project-Id-Version: Snapmaker Orca V2.0.0 Official Release\n" +"Project-Id-Version: Snapmaker Orca V2.3.0 Official Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2024-06-19 16:50+0700\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-10-16 20:29+0300\n" "Last-Translator: \n" "Language-Team: Andylg \n" "Language: ru_RU\n" @@ -17,23 +17,130 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" -"X-Generator: Poedit 3.4.2\n" +"X-Generator: Poedit 3.8\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "Печать TPU с помощью AMS не поддерживается." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Влажный PVA становится гибким и застревает внутри AMS, поэтому перед " +"использованием его необходимо просушить." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Филаменты CF/GF твердые и хрупкие, легко ломаются или застревают в AMS, " +"поэтому используйте их с осторожностью." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Текущая влажность внутри AMS-модуля" + +msgid "Humidity" +msgstr "Влажность" + +msgid "Temperature" +msgstr "Температура" + +msgid "Left Time" +msgstr "Оставшееся время" + +msgid "Drying" +msgstr "Сушка" + +msgid "Idle" +msgstr "Простой" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Серийный номер:" + +msgid "Version:" +msgstr "Версия:" + +msgid "Latest version" +msgstr "Последняя версия" + +msgid "Support Painting" msgstr "Рисование поддержек" -msgid "Alt + Mouse wheel" -msgstr "Alt + Колесо мыши" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Колесо мыши" msgid "Section view" -msgstr "Отсечение вида" +msgstr "Вид в разрезе" msgid "Reset direction" msgstr "Сброс направления" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Колесо мыши" - msgid "Pen size" msgstr "Размер кисти" @@ -47,10 +154,7 @@ msgid "Right mouse button" msgstr "Правая кнопка мыши" msgid "Block supports" -msgstr "Блокировка поддержки" - -msgid "Shift + Left mouse button" -msgstr "Shift + Левая кнопка мыши" +msgstr "Блокировка поддержек" msgid "Erase" msgstr "Очистить" @@ -59,16 +163,17 @@ msgid "Erase all painting" msgstr "Очистить всё" msgid "Highlight overhang areas" -msgstr "Выделение свеса по углу" +msgstr "Выделить зоны нависания" msgid "Gap fill" -msgstr "Заполнение пробелов" +msgstr "Заполнение пустот" msgid "Perform" msgstr "Выполнить" +# это в гизмо покраски msgid "Gap area" -msgstr "Площадь пробела" +msgstr "Площадь пустот" msgid "Tool type" msgstr "Тип инструмента" @@ -77,7 +182,7 @@ msgid "Smart fill angle" msgstr "Угол для умной заливки" msgid "On overhangs only" -msgstr "Только на свесах" +msgstr "Только на нависаниях" msgid "Auto support threshold angle: " msgstr "Пороговый угол автоподдержки: " @@ -91,6 +196,7 @@ msgstr "Сфера" msgid "Fill" msgstr "Заливка" +# это в гизмо покраски msgid "Gap Fill" msgstr "Заполнение пробелов" @@ -99,28 +205,29 @@ msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Позволяет рисовать на выбранных гранях, используя: \"%1%\"" msgid "Highlight faces according to overhang angle." -msgstr "Выделение граней по углу свеса." +msgstr "Выделение граней по углу нависания." +# это в рисование поддержки идет после - Выделение граней по углу свеса. msgid "No auto support" -msgstr "Откл. автоподдержку" +msgstr "Автоподдержка отключена" msgid "Support Generated" msgstr "Поддержка сгенерирована" msgid "Gizmo-Place on Face" -msgstr "Гизмо поверхностью на стол" +msgstr "Гизмо: Поверхностью на стол" msgid "Lay on face" msgstr "Поверхностью на стол" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" -"Количество пластиковых нитей превышает максимальное количество " -"поддерживаемое инструментом рисования. Только первые %1% материала будут " -"доступны в инструменте для рисования." +"Количество филамента превышает максимальное количество поддерживаемое " +"инструментом рисования. Только первые %1% материала будут доступны в " +"инструменте для рисования." msgid "Color Painting" msgstr "Покраска" @@ -135,7 +242,7 @@ msgid "Key 1~9" msgstr "Клавиша 1~9" msgid "Choose filament" -msgstr "Выберите пруток" +msgstr "Выберите филамент" msgid "Edge detection" msgstr "Обнаружение граней" @@ -144,7 +251,7 @@ msgid "Triangles" msgstr "Треугольники" msgid "Filaments" -msgstr "Прутки" +msgstr "Филамент" msgid "Brush" msgstr "Кисть" @@ -158,12 +265,21 @@ msgstr "Заливка" msgid "Height range" msgstr "Диапазон высоты слоёв" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "Enter" msgid "Toggle Wireframe" msgstr "Показать/скрыть каркас" +msgid "Remap filaments" +msgstr "Перераспределение филамента" + +msgid "Remap" +msgstr "Перераспределение" + +msgid "Cancel" +msgstr "Отмена" + msgid "Shortcut Key " msgstr "Горячая клавиша " @@ -171,9 +287,7 @@ msgid "Triangle" msgstr "Треугольник" msgid "Height Range" -msgstr "" -"Диапазон \n" -"высоты слоёв" +msgstr "Диапазон высот" msgid "Vertical" msgstr "Вертикальная линия" @@ -186,19 +300,43 @@ msgstr "Удаление окрашенного участка" #, boost-format msgid "Painted using: Filament %1%" -msgstr "Окрашено с использованием прутка %1%" +msgstr "Окрашено с использованием филамента %1%" + +msgid "Filament remapping finished." +msgstr "Перераспределение филамента завершено." + +msgid "Paint-on fuzzy skin" +msgstr "Нарисовать нечеткую оболочку" + +msgid "Brush size" +msgstr "Размер кисти" + +msgid "Brush shape" +msgstr "Форма кисти" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" msgid "Move" msgstr "Перемещение" +msgid "Please select at least one object." +msgstr "Пожалуйста, выберите хотя бы одну модель." + msgid "Gizmo-Move" -msgstr "Гизмо перемещения" +msgstr "Гизмо: Перемещение" msgid "Rotate" -msgstr "Поворот" +msgstr "Вращение" msgid "Gizmo-Rotate" -msgstr "Гизмо поворота" +msgstr "Гизмо: Вращение" msgid "Optimize orientation" msgstr "Оптимизация положения модели" @@ -210,7 +348,7 @@ msgid "Scale" msgstr "Масштаб" msgid "Gizmo-Scale" -msgstr "Гизмо масштаба" +msgstr "Гизмо: Масштаб" msgid "Error: Please close all toolbar menus first" msgstr "Ошибка: пожалуйста, сначала закройте все меню панели инструментов." @@ -221,14 +359,20 @@ msgstr "дюйм" msgid "mm" msgstr "мм" -msgid "Position" -msgstr "Позиция" +msgid "Part selection" +msgstr "Выбор модели" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Вращение" +msgid "Fixed step drag" +msgstr "Фиксированный шаг перетаскивания" + +msgid "Single sided scaling" +msgstr "Одностороннее масштабирование" + +msgid "Position" +msgstr "Положение" + +msgid "Rotate (relative)" +msgstr "Поворот (относительный)" msgid "Scale ratios" msgstr "Коэф. масштаба" @@ -245,39 +389,45 @@ msgstr "Перемещение" msgid "Group Operations" msgstr "Групповые манипуляции" -msgid "Set Position" -msgstr "Задание позиции" - msgid "Set Orientation" -msgstr "Задание поворота" +msgstr "Задание ориентации" msgid "Set Scale" msgstr "Задание масштаба" msgid "Reset Position" -msgstr "Сброс позиции" +msgstr "Сброс положения" msgid "Reset Rotation" msgstr "Сброс вращения" -msgid "World coordinates" -msgstr "Мировая СК" - msgid "Object coordinates" msgstr "СК модели" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Мировая СК" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Сброс текущего поворота до значения при открытии инструмента поворота." + +msgid "Rotate (absolute)" +msgstr "Поворот (абсолютный)" + +msgid "Reset current rotation to real zeros." +msgstr "Сбросить текущее вращение до реальных нулей." + +msgid "Part coordinates" +msgstr "Координаты модели" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Размер" -msgid "%" -msgstr "%" - msgid "uniform scale" -msgstr "Равномерное масштабирование" +msgstr "равномерное масштабирование" msgid "Planar" msgstr "Плоский" @@ -286,7 +436,7 @@ msgid "Dovetail" msgstr "Ласточкин хвост" msgid "Auto" -msgstr "Автоматич." +msgstr "Авто" msgid "Manual" msgstr "Вручную" @@ -316,7 +466,7 @@ msgid "Keep orientation" msgstr "Сохранить ориентацию" msgid "Place on cut" -msgstr "Срезом на стол" +msgstr "Сечением на стол" msgid "Flip upside down" msgstr "Перевернуть вверх дном" @@ -339,6 +489,12 @@ msgstr "Форма" msgid "Depth" msgstr "Глубина" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Вращение" + msgid "Groove" msgstr "Паз" @@ -371,7 +527,7 @@ msgid "" msgstr "" "Нажмите, чтобы перевернуть секущую плоскость\n" "Двигайте, чтобы переместить секущую плоскость\n" -"Правая кнопка мыши на части модели для переназначения стороны" +"Для переназначения стороны части модели используйте правую кнопку мыши" msgid "Move cut plane" msgstr "Перемещение секущей плоскости" @@ -380,7 +536,7 @@ msgid "Mode" msgstr "Режим" msgid "Change cut mode" -msgstr "Выбор режима секущей плоскости" +msgstr "Выбор режима сечения" msgid "Tolerance" msgstr "Допуск" @@ -389,7 +545,7 @@ msgid "Drag" msgstr "Перетащить" msgid "Draw cut line" -msgstr "Нарисуйте линию разреза" +msgstr "Нарисовать линию сечения" msgid "Left click" msgstr "Левая кнопка мыши" @@ -417,7 +573,7 @@ msgstr "Выбрать все соединения" # Разный перевод одного слова -Одно название действия Разрезать в другой в Правке -> Вырезать msgid "Cut" -msgstr "Разрезать" +msgstr "Сечение" msgid "Rotate cut plane" msgstr "Поворот секущей плоскости" @@ -429,7 +585,7 @@ msgid "Bulge" msgstr "Выпуклость" msgid "Bulge proportion related to radius" -msgstr "Пропорция выпуклости клипсы, связанная с радиусом" +msgstr "Пропорция выпуклости, связанная с радиусом" msgid "Space" msgstr "Пробел" @@ -440,9 +596,6 @@ msgstr "Пропорция прорези в клипсе, связанная с msgid "Confirm connectors" msgstr "Подтвердить" -msgid "Cancel" -msgstr "Отмена" - msgid "Build Volume" msgstr "Область построения" @@ -460,7 +613,7 @@ msgid "Edited" msgstr "Изменено" msgid "Cut position" -msgstr "Положение секущей плоскости" +msgstr "Положение сечения" msgid "Reset cutting plane" msgstr "Сброс позиции секущей плоскости" @@ -472,7 +625,7 @@ msgid "Add connectors" msgstr "Добавить соединения" msgid "Reset cut" -msgstr "Сброс" +msgstr "Сброс сечения" msgid "Reset cutting plane and remove connectors" msgstr "Сброс позиции секущей плоскости и удаление всех соединений" @@ -483,14 +636,15 @@ msgstr "Верхняя часть" msgid "Lower part" msgstr "Нижняя часть" +# ?????8 к чему относится? msgid "Keep" -msgstr "Сохранять" +msgstr "Сохранить" msgid "Flip" msgstr "Перевернуть" msgid "After cut" -msgstr "После разрезания" +msgstr "После сечения" msgid "Cut to parts" msgstr "Разрезать на части" @@ -515,30 +669,30 @@ msgstr[2] "%1$d соединений выходит за контур модел msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "%1$d соединение находится за пределами модели" -msgstr[1] "%1$d соединения находится за пределами модели" -msgstr[2] "%1$d соединений находится за пределами модели" +msgstr[1] "%1$d соединения находятся за пределами модели" +msgstr[2] "%1$d соединений находятся за пределами модели" msgid "Some connectors are overlapped" -msgstr "Имеются пересекающие соединения" +msgstr "Имеются пересекающиеся соединения" msgid "Select at least one object to keep after cutting." -msgstr "Выберите хотя бы одну из частей для сохранения после разреза." +msgstr "Выберите хотя бы одну из моделей для сохранения после сечения." msgid "Cut plane is placed out of object" -msgstr "Секущая плоскость находится за пределами модели." +msgstr "Секущая плоскость находится за пределами модели" msgid "Cut plane with groove is invalid" -msgstr "Текущее положение секущей плоскости с пазом недопустимо." +msgstr "Текущее положение секущей плоскости с пазом недопустимо" msgid "Connector" msgstr "Соединение" msgid "Cut by Plane" -msgstr "Разрез по плоскости" +msgstr "Сечение по плоскости" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" -"При работе режущего инструмента образовались открытые рёбра. Хотите починить " +"при работе режущего инструмента образовались открытые рёбра. Хотите починить " "это сейчас?" msgid "Repairing model object" @@ -568,13 +722,13 @@ msgstr "" "медленной. Настоятельно рекомендуется упростить модель." msgid "Simplify model" -msgstr "Упростить полигональную сетку" +msgstr "Упростить модель" msgid "Simplify" -msgstr "Упрощение полигональной сетки" +msgstr "Упростить" msgid "Simplification is currently only allowed when a single part is selected" -msgstr "В настоящее время упрощение работает только при выборе одной модели." +msgstr "В настоящее время упрощение работает только при выборе одной модели" msgid "Error" msgstr "Ошибка" @@ -599,17 +753,12 @@ msgid "%d triangles" msgstr "Треугольников: %d" msgid "Show wireframe" -msgstr "Показывать каркас" +msgstr "Показать каркас" -#, boost-format -msgid "%1%" -msgstr "%1%" - -# ??? -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Невозможно применить при предпросмотре нарезки." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Операция уже отменена. Пожалуйста, подождите несколько секунд." msgid "Face recognition" @@ -619,12 +768,6 @@ msgstr "Распознавание граней" msgid "Perform Recognition" msgstr "Выполнение распознавания" -msgid "Brush size" -msgstr "Размер кисти" - -msgid "Brush shape" -msgstr "Форма кисти" - msgid "Enforce seam" msgstr "Принудительный шов" @@ -635,7 +778,7 @@ msgid "Seam painting" msgstr "Рисование шва" msgid "Remove selection" -msgstr "Удаление выделенного" +msgstr "Удалить выделенное" msgid "Entering Seam painting" msgstr "Вход в рисование шва" @@ -655,15 +798,13 @@ msgid "Thickness" msgstr "Толщина" msgid "Text Gap" -msgstr "" -"Межбуквенный \n" -"интервал" +msgstr "Межбуквенный интервал" msgid "Angle" msgstr "Угол" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Глубина\n" @@ -678,8 +819,8 @@ msgstr "На поверхности" msgid "Horizontal text" msgstr "Горизонтальный текст" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Мышь вверх или вниз" +msgid "Mouse move up or down" +msgstr "Движение мыши вверх или вниз" msgid "Rotate text" msgstr "Поворот текста" @@ -702,10 +843,10 @@ msgid "Embossed text" msgstr "Рельефный текст" msgid "Enter emboss gizmo" -msgstr "Вход в гизмо рельефный текст" +msgstr "Гизмо: Вход в рельефный текст" msgid "Leave emboss gizmo" -msgstr "Выход из гизмо рельефный текст" +msgstr "Гизмо: выход из рельефного текста" msgid "Embossing actions" msgstr "Действие c рельефным текстом" @@ -745,7 +886,7 @@ msgstr "" "шрифт." msgid "Embossed text cannot contain only white spaces." -msgstr "Рельефный текст не может содержать одни пробелы." +msgstr "Рельефный текст не может содержать только пробелы." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "Текст содержит символ ('?'), которого нет в шрифте." @@ -770,7 +911,7 @@ msgid "Text doesn't show current horizontal alignment." msgstr "Текст не отображает текущее горизонтальное выравнивание." msgid "Revert font changes." -msgstr "Сброс шрифта." +msgstr "Сброс настроек шрифта." #, boost-format msgid "Font \"%1%\" can't be selected." @@ -783,7 +924,7 @@ msgid "Join" msgstr "Добавление" msgid "Click to change text into object part." -msgstr "Выберите, если хотите преобразовать текст в часть модели." +msgstr "Нажмите, если хотите преобразовать текст в часть модели." msgid "You can't change a type of the last solid part of the object." msgstr "Вы не можете изменить тип последнего твердотельного элемента модели." @@ -805,8 +946,8 @@ msgid "Change Text Type" msgstr "Изменить тип текста" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "Переименование стиля (%1%) для рельефного текста" +msgid "Rename style (%1%) for embossing text" +msgstr "Переименование стиля (%1%) рельефного текста" msgid "Name can't be empty." msgstr "Имя не может быть пустым." @@ -831,7 +972,7 @@ msgstr "Сначала добавьте стиль в список." #, boost-format msgid "Save %1% style" -msgstr "Сохранить стиль \"%1%\"." +msgstr "Сохранить стиль \"%1%\"" msgid "No changes to save." msgstr "Нет изменений для сохранения." @@ -892,23 +1033,23 @@ msgstr "" "Хотите продолжить?" msgid "Not valid style." -msgstr "Не допустимый стиль." +msgstr "Недопустимый стиль." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "Стиль \"%1%\" не может быть использован и будет удалён из списка." msgid "Unset italic" -msgstr "Убрать стиль Italic" +msgstr "Убрать Курсив" msgid "Set italic" -msgstr "Задать стиль Italic" +msgstr "Задать Курсив" msgid "Unset bold" -msgstr "Убрать стиль Bold" +msgstr "Убрать Жирный" msgid "Set bold" -msgstr "Задать стиль Bold" +msgstr "Задать Жирный" msgid "Revert text size." msgstr "Сброс размера шрифта." @@ -997,9 +1138,9 @@ msgid "Distance of the center of the text to the model surface." msgstr "Расстояние от центра текста до поверхности модели." msgid "Undo rotation" -msgstr "Сброс вращения" +msgstr "Отменить вращение" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Поворот текста по часовой стрелке." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1019,10 +1160,14 @@ msgstr "Текст лицевой стороной к камере" msgid "Orient the text towards the camera." msgstr "Сориентировать текст по направлению к камере." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "Шрифт \"%1%\" не может быть использован. Пожалуйста, выберите другой." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "Т.к. не удалось загрузить тот же шрифт (\"%1%\"), приложение выбрало похожий " "шрифт (\"%2%\"). Выберите шрифт для включения редактирования текста." @@ -1086,7 +1231,7 @@ msgstr "Сдвиг от поверхности" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" -msgstr "Сохранять верт. ориентацию" +msgstr "Сохранять вертикальную ориентацию" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and @@ -1103,10 +1248,10 @@ msgid "SVG move" msgstr "Перемещение SVG" msgid "Enter SVG gizmo" -msgstr "Вход в гизмо SVG" +msgstr "Гизмо: Вход в SVG" msgid "Leave SVG gizmo" -msgstr "Выход из гизмо SVG" +msgstr "Гизмо: Выход из SVG" msgid "SVG actions" msgstr "Действия с SVG" @@ -1137,13 +1282,13 @@ msgstr "Открытый контур с заливкой" msgid "Undefined stroke type" msgstr "Неопределенный тип обводки" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" "Контур не может быть исправлен от проблемы самопересечения и дублирующихся " "точек." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "У конечной фигуры имеется самопересечение или несколько точек с одинаковыми " @@ -1153,7 +1298,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "Фигура помечена как невидимая (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Заливка фигуры (%1%) не поддерживается: %2%." @@ -1183,7 +1328,7 @@ msgstr "Перезагрузить SVG файл с диска." msgid "Change file" msgstr "Изменить файл" -msgid "Change to another .svg file" +msgid "Change to another SVG file." msgstr "Выбрать другой SVG файл." msgid "Forget the file path" @@ -1202,7 +1347,7 @@ msgstr "Запечь" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "Запекание SVG в модель т.е. преобразование в нередактируемую." +msgstr "Запекание SVG в модель т.е. преобразование в нередактируемую" msgid "Save as" msgstr "Сохранить как" @@ -1210,8 +1355,9 @@ msgstr "Сохранить как" msgid "Save SVG file" msgstr "Сохранить SVG файл" -msgid "Save as '.svg' file" -msgstr "Сохранить как '.svg' файл." +#, fuzzy +msgid "Save as SVG file." +msgstr "Сохранить как '.svg' файл" msgid "Size in emboss direction." msgstr "Глубина рельефа." @@ -1228,7 +1374,7 @@ msgid "Height of SVG." msgstr "Высота SVG." msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "Блокировка/разблокировка пропорции SVG." +msgstr "Блокировка/разблокировка соотношения сторон SVG." msgid "Reset scale" msgstr "Сброс масштаба" @@ -1237,7 +1383,7 @@ msgid "Distance of the center of the SVG to the model surface." msgstr "Расстояние от центра SVG до поверхности модели." msgid "Reset distance" -msgstr "Сбросить расстояние" +msgstr "Сброс расстояния" msgid "Reset rotation" msgstr "Сброс вращения" @@ -1247,10 +1393,10 @@ msgstr "" "Блокировка/разблокировка угла поворота при перетаскивании над поверхностью." msgid "Mirror vertically" -msgstr "Зеркалировать по вертикали" +msgstr "Отзеркалить по вертикали" msgid "Mirror horizontally" -msgstr "Зеркалировать по горизонтали" +msgstr "Отзеркалить по горизонтали" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" @@ -1279,6 +1425,10 @@ msgstr "Парсер NanoSVG не может прочитать файл (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "Файл SVG не содержит ни одного контура для рельефного текста (%1%)." +# ????? +msgid "No feature" +msgstr "Элементы отсутствуют" + msgid "Vertex" msgstr "Вершина" @@ -1303,16 +1453,12 @@ msgstr "Центр ребра" msgid "Center of circle" msgstr "Центр окружности" -msgid "ShiftLeft mouse button" -msgstr "Левая кнопка мыши" - msgid "Select feature" msgstr "Выбрать элемент" msgid "Select point" msgstr "Выбрать точку" -# ?????? В двух местах - в одном месте действие в другом кнопка, как быть? msgid "Delete" msgstr "Удалить" @@ -1322,18 +1468,23 @@ msgstr "Выбрать заново" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Отменить выбор" +msgid "Cancel a feature until exit" +msgstr "Отменить выбор до выхода" msgid "Measure" msgstr "Измерения" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Убедитесь, что коэффициент разброса равен 1 и выбрана хотя бы одна модель." + msgid "Edit to scale" msgstr "Редактировать масштаб" msgctxt "Verb" -msgid "Scale" -msgstr "Масштаб" +msgid "Scale all" +msgstr "Масштабировать все" msgid "None" msgstr "Нет" @@ -1347,6 +1498,48 @@ msgstr "Длина" msgid "Selection" msgstr "Выделение" +msgid " (Moving)" +msgstr " (подвижная)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Выберите две грани на моделях и\n" +"соберите объекты вместе." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Выберите 2 точки или окружности на моделях \n" +"и укажите расстояние между ними." + +msgid "Face" +msgstr "Грань" + +msgid " (Fixed)" +msgstr " (неподвижная)" + +msgid "Point" +msgstr "Точка" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Выбор элемента 1 отменён,\n" +"элемент 2 стал элементом 1" + +msgid "Warning: please select Plane's feature." +msgstr "Внимание: выберите плоскость." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Внимание: выберите точку или окружность." + +msgid "Warning: please select two different meshes." +msgstr "Внимание: выберите требуемый элемент на втором объекте." + msgid "Copy to clipboard" msgstr "Скопировать в буфер обмена" @@ -1362,8 +1555,27 @@ msgstr "Длина прямой" msgid "Distance XYZ" msgstr "Расстояние XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Параллельно" + +msgid "Center coincidence" +msgstr "Совместить центры" + +# ???? +msgid "Feature 1" +msgstr "Элемент 1" + +msgid "Reverse rotation" +msgstr "Обратное вращение" + +msgid "Rotate around center:" +msgstr "Вращение вокруг центра:" + +msgid "Parallel distance:" +msgstr "Расстояние между параллельными гранями:" + +msgid "Flip by Face 2" +msgstr "Перевернуть грань 2" msgid "Notice" msgstr "Примечание" @@ -1376,7 +1588,7 @@ msgid "%1% was replaced with %2%" msgstr "%1% было заменено на %2%" msgid "The configuration may be generated by a newer version of Snapmaker Orca." -msgstr "Возможно, эта конфигурация создана в более новой версии Snapmaker Orca." +msgstr "Возможно, этот профиль создан в более новой версии Snapmaker Orca." msgid "Some values have been replaced. Please check them:" msgstr "Некоторые значения были заменены. Пожалуйста, проверьте их:" @@ -1387,24 +1599,25 @@ msgstr "Профиль процесса" # ?????6 В одном месте юзается? msgid "Filament" -msgstr "Профиль прутка" +msgstr "Филамент" msgid "Machine" msgstr "Принтер" msgid "Configuration package was loaded, but some values were not recognized." -msgstr "" -"Пакет конфигурации был загружен, но некоторые значения не были распознаны." +msgstr "Пакет профилей был загружен, но некоторые значения не были распознаны." #, boost-format msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" -"Файл конфигурации \"%1%\" был загружен, но некоторые значения не были " -"распознаны." +"Файл профиля \"%1%\" был загружен, но некоторые значения не были распознаны." + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Основан на PrusaSlicer и BambuStudio" msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca завершает работу из-за нехватки памяти. Возможно, это баг " @@ -1431,7 +1644,7 @@ msgid "Untitled" msgstr "Без названия" msgid "Downloading Bambu Network Plug-in" -msgstr "Загрузка сетевого плагина для принтеров Bambu" +msgstr "Загрузка сетевого плагина принтера Bambu" msgid "Login information expired. Please login again." msgstr "Срок действия данных для входа истек. Пожалуйста, авторизуйтесь снова." @@ -1441,7 +1654,7 @@ msgstr "Неверный пароль" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" -msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" +msgstr "Сбой подключения к %s! [SN:%s, код=%s]" msgid "" "Snapmaker Orca requires the Microsoft WebView2 Runtime to operate certain " @@ -1455,6 +1668,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Путь не существует или не является каталогом: %s" + #, c-format, boost-format msgid "" "%s\n" @@ -1475,10 +1692,10 @@ msgstr "" "Нажмите OK, чтобы загрузить последнюю версию в браузере по умолчанию: %s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "Orca Slice нуждается в обновлении." +msgstr "Orca Slice нуждается в обновлении" msgid "This is the newest version." -msgstr "У вас стоит самая последняя версия." +msgstr "Установлена последняя версия программы." msgid "Info" msgstr "Информация" @@ -1495,7 +1712,7 @@ msgstr "" "принтера не будут затронуты." msgid "Rebuild" -msgstr "Пересоздание" +msgstr "Перестроить" msgid "Loading current presets" msgstr "Загрузка текущих профилей" @@ -1503,44 +1720,44 @@ msgstr "Загрузка текущих профилей" msgid "Loading a mode view" msgstr "Загрузка режима отображения" -msgid "Choose one file (3mf):" -msgstr "Выберите один файл (3mf):" +msgid "Choose one file (3MF):" +msgstr "Выберите один файл (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Выберите один или несколько файлов (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Выберите один или несколько файлов (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Выберите один или несколько файлов (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Выберите один или несколько файлов (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Выберите zip-файл" -msgid "Choose one file (gcode/3mf):" -msgstr "Выберите один файл (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Выберите один файл (GCODE/3MF):" msgid "Some presets are modified." msgstr "В некоторых профилях имеются изменения." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" -"Вы можете сохранить изменённые профили в новом проекте, отменить или " -"сохранить изменения в новые профили." +"Вы можете перенести сделанные изменения в новый проект, отказаться от их " +"сохранения или сохранить их." msgid "User logged out" msgstr "Пользователь вышел из системы" msgid "new or open project file is not allowed during the slicing process!" -msgstr "Создание или открытие файла проекта во время нарезки не допускается!" +msgstr "создание или открытие файла проекта во время нарезки не допускается!" msgid "Open Project" msgstr "Открыть проект" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Слишком старая версия Snapmaker Orca. Для корректной работы обновите программу " "до последней версии." @@ -1553,8 +1770,8 @@ msgid "" "newly created user presets can only be used locally." msgstr "" "Количество пользовательских профилей, кэшированных в облаке, превысило " -"установленный лимит. Новые создаваемые пользовательские профили можно будет " -"использовать только локально." +"установленный лимит. Новые пользовательские профили можно будет использовать " +"только локально." msgid "Sync user presets" msgstr "Синхронизировать пользовательские профили" @@ -1609,10 +1826,10 @@ msgid "Rename" msgstr "Переименовать" msgid "Snapmaker Orca GUI initialization failed" -msgstr "Ошибка инициализации графического интерфейса приложения" +msgstr "Ошибка инициализации графического интерфейса Snapmaker Orca" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Критическая ошибка, обнаружено исключение: %1%" msgid "Quality" @@ -1642,12 +1859,18 @@ msgstr "Сплошных слоёв сверху" msgid "Top Minimum Shell Thickness" msgstr "Минимальная толщина оболочки сверху" +msgid "Top Surface Density" +msgstr "Плотность верхней поверхности" + msgid "Bottom Solid Layers" msgstr "Сплошных слоёв снизу" msgid "Bottom Minimum Shell Thickness" msgstr "Минимальная толщина оболочки снизу" +msgid "Bottom Surface Density" +msgstr "Плотность нижней поверхности" + msgid "Ironing" msgstr "Разглаживание" @@ -1655,7 +1878,7 @@ msgid "Fuzzy Skin" msgstr "Нечёткая оболочка" msgid "Extruders" -msgstr "Экструдеры" +msgstr "Количество экструдеров" msgid "Extrusion Width" msgstr "Ширина экструзии" @@ -1714,6 +1937,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "Удаление выбранных моделей" +msgid "Backspace" +msgstr "Backspace" + msgid "Load..." msgstr "Загрузить…" @@ -1733,7 +1959,10 @@ msgid "Torus" msgstr "Тороид" msgid "Orca Cube" -msgstr "Куб Orca Design" +msgstr "Куб Orca" + +msgid "Orca Tolerance Test" +msgstr "Тест допусков от Orca" msgid "3DBenchy" msgstr "3DBenchy" @@ -1742,7 +1971,7 @@ msgid "Autodesk FDM Test" msgstr "FDM тест от Autodesk" msgid "Voron Cube" -msgstr "Куб Voron Design" +msgstr "Куб Voron" msgid "Stanford Bunny" msgstr "Стенфордский кролик" @@ -1752,15 +1981,15 @@ msgstr "«Струнный ад» Orca" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "На верхней поверхности модели присутствует рельефный текст. Для достижения " -"оптимального результата рекомендуется установить значение «Порог одного " -"периметра» (min_width_top_surface)\" равным 0, чтобы хорошо работал параметр " -"«Только один периметр на верхней поверхности».\n" +"оптимального результата рекомендуется установить значение «Порог одной " +"стенки» (min_width_top_surface)\" равным 0, чтобы хорошо работал параметр " +"«Только одна стенка на верхней поверхности».\n" "Да - Изменить эти настройки автоматически\n" "Нет - Не изменять эти настройки" @@ -1786,7 +2015,7 @@ msgid "Fill bed with copies" msgstr "Заполнить весь стол копиями" msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "Заполнить оставшуюся область печатного стола копиями выбранной модели." +msgstr "Заполнить оставшуюся область печатного стола копиями выбранной модели" msgid "Printable" msgstr "Для печати" @@ -1812,18 +2041,24 @@ msgstr "Заменить на другую модель" msgid "Replace the selected part with new STL" msgstr "Заменить выбранную модель другой" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" -msgstr "Сменить пруток" +msgstr "Сменить филамент" msgid "Set filament for selected items" -msgstr "Задать пруток для выбранных элементов" +msgstr "Задать филамент для выбранных элементов" msgid "Default" msgstr "По умолчанию" #, c-format, boost-format msgid "Filament %d" -msgstr "Пруток %d" +msgstr "Филамент %d" msgid "current" msgstr "текущий" @@ -1832,7 +2067,7 @@ msgid "Scale to build volume" msgstr "Отмасштабировать под область печати" msgid "Scale an object to fit the build volume" -msgstr "Отмасштабировать выбранную модель до объёма стола" +msgstr "Масштабировать выбранную модель до объёма стола" msgid "Flush Options" msgstr "Опции очистки" @@ -1844,33 +2079,32 @@ msgid "Flush into this object" msgstr "Очистка в модель" msgid "Flush into objects' support" -msgstr "Очистка в поддержку" +msgstr "Очистка в поддержку модели" msgid "Edit in Parameter Table" msgstr "Редактирование таблицы параметров" -msgid "Convert from inch" -msgstr "Преобразовать размеры из дюймов" +msgid "Convert from inches" +msgstr "Преобразовать дюймы в миллиметры" -msgid "Restore to inch" -msgstr "Восстановить размеры в дюймы" +msgid "Restore to inches" +msgstr "Восстановить в дюймы" -msgid "Convert from meter" -msgstr "Преобразовать размеры из метров" +msgid "Convert from meters" +msgstr "Преобразовать метры в дюймы" -msgid "Restore to meter" -msgstr "Восстановить размеры в метры" +msgid "Restore to meters" +msgstr "Восстановить в миллиметры" # при выборе на столе msgid "Assemble" msgstr "Объединить в сборку" msgid "Assemble the selected objects to an object with multiple parts" -msgstr "" -"Объединение выбранных объектов в модель, состоящую из несколько частей." +msgstr "Объединение выбранных объектов в модель, состоящую из несколько частей" msgid "Assemble the selected objects to an object with single part" -msgstr "Объединение выбранных моделей в единую." +msgstr "Объединение выбранных моделей в единую" msgid "Mesh boolean" msgstr "Булевы операции" @@ -1912,7 +2146,7 @@ msgid "Change SVG source file, projection, size, ..." msgstr "Изменение исходного файла SVG, проекции, размера..." msgid "Invalidate cut info" -msgstr "Удалить информацию о разрезе" +msgstr "Удалить информацию о сечении" msgid "Add Primitive" msgstr "Добавить примитив" @@ -1947,38 +2181,47 @@ msgstr "Разделить выбранную модель" msgid "Auto orientation" msgstr "Автоориентация" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Автоориентация модели для улучшения качества печати." +msgid "Edit" +msgstr "Правка" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Выбрать всё" msgid "select all objects on current plate" -msgstr "Выбрать все модели на текущем столе" +msgstr "выбрать все модели на текущем столе" msgid "Delete All" msgstr "Удалить всё" msgid "delete all objects on current plate" -msgstr "Удаление всех моделей на текущем столе" +msgstr "удаление всех моделей на текущем столе" msgid "Arrange" msgstr "Расставить" msgid "arrange current plate" -msgstr "Расстановка моделей на текущем столе" +msgstr "расстановка моделей на текущем столе" msgid "Reload All" msgstr "Перезагрузить всё" msgid "reload all from disk" -msgstr "Перезагрузить всё с диска" +msgstr "перезагрузить всё с диска" msgid "Auto Rotate" msgstr "Автоповорот" msgid "auto rotate current plate" -msgstr "Автоповорот моделей на текущем стола" +msgstr "автоповорот моделей на текущем столе" msgid "Delete Plate" msgstr "Удалить стол" @@ -1986,6 +2229,30 @@ msgstr "Удалить стол" msgid "Remove the selected plate" msgstr "Удалить выбранный стол" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Сделать копию" @@ -1995,17 +2262,26 @@ msgstr "Упростить полигональную сетку" msgid "Center" msgstr "По центру" +msgid "Drop" +msgstr "Опустить на стол" + msgid "Edit Process Settings" msgstr "Редактировать настройки процесса печати" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Редактировать параметры печати для одной модели" msgid "Change Filament" -msgstr "Сменить пруток" +msgstr "Сменить филамент" msgid "Set Filament for selected items" -msgstr "Задать пруток для выбранных элементов" +msgstr "Задать филамент для выбранных элементов" msgid "Unlock" msgstr "Разблокировать" @@ -2020,7 +2296,7 @@ msgid "Name" msgstr "Имя" msgid "Fila." -msgstr "Прут." +msgstr "Фила." #, c-format, boost-format msgid "%1$d error repaired" @@ -2046,8 +2322,8 @@ msgstr[0] "%1$d открытое ребро" msgstr[1] "%1$d открытых ребра" msgstr[2] "%1$d открытых рёбер" -msgid "Right click the icon to fix model object" -msgstr "Нажмите правой кнопкой мыши на значок, чтобы починить модель" +msgid "Click the icon to repair model object" +msgstr "Нажмите на значок, чтобы починить модель" msgid "Right button click the icon to drop the object settings" msgstr "Нажмите правой кнопкой мыши на значок, чтобы изменить настройки модели" @@ -2063,11 +2339,14 @@ msgstr "" msgid "Click the icon to toggle printable property of the object" msgstr "Нажмите на значок, чтобы разрешить/запретить печать модели" +# ??? Нажмите на значок, открыть рисование поддержек... чтобы перераскрасить области расположения поддержек для модели." msgid "Click the icon to edit support painting of the object" -msgstr "Нажмите на значок, чтобы отредактировать рисунок поддержки этой модели" +msgstr "" +"Нажмите на значок, чтобы изменить зоны расположения поддержек для модели" +# ??? цветовую раскраску модели? открыть покраску, чтобы изменить раскраску модели msgid "Click the icon to edit color painting of the object" -msgstr "Нажмите на значок, чтобы изменить цвет модели" +msgstr "Нажмите на значок, чтобы перераскрасить модель" msgid "Click the icon to shift this object to the bed" msgstr "Нажмите на значок, чтобы переместить эту модель на стол" @@ -2089,7 +2368,7 @@ msgstr "Добавление модификатора" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "" -"Переключение в режим работы с моделями для редактирования настроек " +"Переключитесь в режим настройки каждой модели, чтобы изменить настройки " "модификатора." msgid "" @@ -2099,6 +2378,9 @@ msgstr "" "Переключение в режим работы с моделями для редактирования настроек процесса " "печати." +msgid "Remove paint-on fuzzy skin" +msgstr "Удалить покраску нечеткой оболочки" + msgid "Delete connector from object which is a part of cut" msgstr "Удаление соединения из модели, которое является частью разреза" @@ -2119,10 +2401,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Это действие приведёт к удалению информации о разрезе.\n" "После этого согласованность модели не может быть гарантирована.\n" @@ -2136,8 +2418,9 @@ msgstr "Удалить все соединения" msgid "Deleting the last solid part is not allowed." msgstr "Удаление последней твердотельной части не допускается." -msgid "The target object contains only one part and can not be splited." -msgstr "Целевая модель едина и не может быть разделена на части." +msgid "The target object contains only one part and can not be split." +msgstr "" +"Заданная модель состоит только из одной части и не может быть разделена." msgid "Assembly" msgstr "Сборка" @@ -2146,7 +2429,7 @@ msgid "Cut Connectors information" msgstr "Информация о вырезанных соединениях" msgid "Object manipulation" -msgstr "Манипуляция над моделями" +msgstr "Манипуляция с моделями" msgid "Group manipulation" msgstr "Групповые манипуляции" @@ -2179,14 +2462,14 @@ msgid "Selection conflicts" msgstr "Конфликты при выборе" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Если первый выбранный элемент является моделью, то второй тоже должен быть " "моделью." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Если первый выбранный элемент является частью модели, то второй должен быть " "частью той же модели." @@ -2217,7 +2500,7 @@ msgstr "Переименование" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "Следующая модель были успешно починена" +msgstr[0] "Следующая модель была успешно починена" msgstr[1] "Следующие модели были успешно починены" msgstr[2] "Следующие модели были успешно починены" @@ -2243,18 +2526,18 @@ msgid "Remove height range" msgstr "Удаление диапазона высот слоёв" msgid "Add height range" -msgstr "Добавление диапазон высот слоёв" +msgstr "Добавление диапазона высот слоёв" msgid "Invalid numeric." msgstr "Неправильное числовое значение." msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" -"Одна ячейка может быть скопирована только в одну или несколько ячеек одного " -"и того же столбца." +"одна ячейка может быть скопирована только в одну или несколько ячеек одного " +"и того же столбца" -msgid "multiple cells copy is not supported" -msgstr "копирование нескольких ячеек не поддерживается" +msgid "Copying multiple cells is not supported." +msgstr "Копирование нескольких ячеек не поддерживается." msgid "Outside" msgstr "Вне стола" @@ -2263,7 +2546,7 @@ msgid "Layer height" msgstr "Высота слоя" msgid "Wall loops" -msgstr "Периметров" +msgstr "Петли стенок" msgid "Infill density(%)" msgstr "Плот. заполнения (%)" @@ -2274,6 +2557,9 @@ msgstr "Автокайма" msgid "Mouse ear" msgstr "Мышиные ушки" +msgid "Painted" +msgstr "Нарисовано" + msgid "Outer brim only" msgstr "Кайма только снаружи" @@ -2287,7 +2573,7 @@ msgid "No-brim" msgstr "Без каймы" msgid "Outer wall speed" -msgstr "Скор. внеш. периметра" +msgstr "Скорость внешней стенки" msgid "Plate" msgstr "Стол" @@ -2296,7 +2582,7 @@ msgid "Brim" msgstr "Кайма" msgid "Object/Part Setting" -msgstr "Настройка для модели/частей" +msgstr "Настройка модели/детали" msgid "Reset parameter" msgstr "Сброс параметра" @@ -2371,10 +2657,10 @@ msgid "Insert template custom G-code at the beginning of this layer." msgstr "Вставить шаблон пользовательского G-кода в начале этого слоя." msgid "Filament " -msgstr "Пруток " +msgstr "Филамент " msgid "Change filament at the beginning of this layer." -msgstr "Сменить пластиковую нить в начале этого слоя." +msgstr "Сменить филамент в начале этого слоя." msgid "Delete Pause" msgstr "Удалить паузу печати" @@ -2389,7 +2675,7 @@ msgid "Delete Custom G-code" msgstr "Удалить пользовательский G-код" msgid "Delete Filament Change" -msgstr "Удалить команду смены прутка" +msgstr "Удалить команду смены филамента" msgid "No printer" msgstr "Принтер не выбран" @@ -2420,116 +2706,188 @@ msgid "Connection to printer failed" msgstr "Не удалось подключиться к принтеру" msgid "Please check the network connection of the printer and Orca." -msgstr "Пожалуйста, проверьте сетевое подключение принтера с Snapmaker Orca." +msgstr "Проверьте сетевое соединение принтера и Orca." msgid "Connecting..." msgstr "Подключение..." -msgid "?" -msgstr "?" +msgid "Auto-refill" +msgstr "" -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Пусто" - -msgid "AMS" -msgstr "АСПП" - -msgid "Auto Refill" -msgstr "Автодозаправка" - -msgid "AMS not connected" -msgstr "АСПП не подключена" - -# ???? кнопка в интерфейсе? Extrude - Выдавить - Load +# кнопка в интерфейсе? Extrude - Выдавить - Load msgid "Load" msgstr "Выдавить" -# ???? кнопка в интерфейсе? retract - Втянуть - Unload (Выгрузить, Вырузка) +# кнопка в интерфейсе? retract - Втянуть - Unload (Выгрузить, Выгрузка) msgid "Unload" msgstr "Втянуть" -msgid "Ext Spool" -msgstr "Внеш. катушка" - -msgid "Tips" -msgstr "Подсказки" - -msgid "Guide" -msgstr "Инстр." - -msgid "Retry" -msgstr "Повтор" - -msgid "Calibrating AMS..." -msgstr "Калибровка АСПП..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "" -"Во время калибровки возникла проблема. Нажмите, чтобы посмотреть способ " -"исправления проблемы." - -msgid "Calibrate again" -msgstr "Повторить калибровку" - -msgid "Cancel calibration" -msgstr "Отменить калибровку" - -msgid "Idling..." -msgstr "Простой..." - -msgid "Heat the nozzle" -msgstr "Нагрев сопла" - -msgid "Cut filament" -msgstr "Отрезка прутка" - -msgid "Pull back current filament" -msgstr "Извлечение текущего прутка" - -msgid "Push new filament into extruder" -msgstr "Вставка нового прутка в экструдер" - -msgid "Purge old filament" -msgstr "Очистка от старого материала" - -msgid "Feed Filament" -msgstr "Подача прутка" - -msgid "Confirm extruded" -msgstr "Подтверждение экструзии" - -msgid "Check filament location" -msgstr "Проверка расположения прутка" - -msgid "Grab new filament" -msgstr "Загрузка нового прутка" - msgid "" "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " "load or unload filaments." msgstr "" -"Выберите слот АСПП, затем нажмите кнопку «Загрузить» или «Выгрузить» для " -"автоматической загрузки или выгрузки прутка." - -msgid "Edit" -msgstr "Правка" +"Выберите слот AMS, затем нажмите кнопку «Выдавить» или «Втянуть» для " +"автоматической загрузки или выгрузки филамента." msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." msgstr "" -"Авторасстановка недоступна,\n" -"т.к. все выбранные модели находятся на заблокированном столе." - -msgid "No arrangable objects are selected." -msgstr "Не выбрано моделей для расстановки." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Фильтровать" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Охлаждение" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Сверху" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Вспомогательный" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "Простой..." + +# При выгрузке/загрузке прутка справа отображается процесс +msgid "Heat the nozzle" +msgstr "Нагрев сопла" + +msgid "Cut filament" +msgstr "Отрезание филамента" + +msgid "Pull back current filament" +msgstr "Извлечение текущего филамента" + +msgid "Push new filament into extruder" +msgstr "Вставьте новый филамент в экструдер" + +msgid "Grab new filament" +msgstr "Загрузка нового филамента" + +msgid "Purge old filament" +msgstr "Очистка от старого материала" + +msgid "Confirm extruded" +msgstr "Подтверждение экструзии" + +msgid "Check filament location" +msgstr "Проверка расположения филамента" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." +msgstr "" +"Все выбранные объекты находятся на заблокированном столе.\n" +"Невозможно автоматически расположить эти объекты." + +msgid "No arrangeable objects are selected." +msgstr "Не выбраны модели для расстановки." + +msgid "" +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Этот стол заблокирован.\n" "Авторасстановка на этом столе невозможна." @@ -2555,8 +2913,7 @@ msgstr "Расстановка выполнена." msgid "" "Arrange failed. Found some exceptions when processing object geometries." msgstr "" -"Ошибка расстановки. Обнаружены некоторые исключения при обработке геометрии " -"моделей." +"Не удалось выполнить расстановку из-за ошибки в геометрических данных модели." #, c-format, boost-format msgid "" @@ -2569,15 +2926,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" -"Автоориентация недоступна,\n" -"т.к. все выбранные модели находятся на заблокированном столе." +"Все выбранные объекты находятся на заблокированном столе.\n" +"Автоматическая ориентация этих объектов невозможна." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Этот стол заблокирован.\n" "Автоориентация на этом столе невозможна." @@ -2626,15 +2983,14 @@ msgstr "Задание отменено." msgid "Upload task timed out. Please check the network status and try again." msgstr "" -"Истекло время ожидания отправки задания. Проверьте сетевое подключение и " -"повторите попытку." +"Истекло время ожидания отправки . Проверьте сетевое подключение и повторите " +"попытку." msgid "Cloud service connection failed. Please try again." msgstr "" "Не удалось подключиться к облачному сервису. Пожалуйста, попробуйте ещё раз." -# Print file - речь про g-код -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Файл печати не найден, нарежьте ещё раз." msgid "" @@ -2664,7 +3020,7 @@ msgstr "" "Размер файла для печати слишком велик. Пожалуйста, уменьшите размер файла и " "повторите попытку." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Файл печати не найден. Пожалуйста, нарежьте его ещё раз и отправьте на " "печать." @@ -2697,28 +3053,65 @@ msgstr "Отправка конфигурации печати" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "" -"Успешно отправлено. Автоматический переход на страницу устройства через %s с." +"Успешно отправлено. Автоматический переход на страницу устройства через %s с" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -"Успешно отправлено. Автоматический переход на следующую страницу через %s с." +"Успешно отправлено. Автоматический переход на следующую страницу через %s с" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Перед печатью через локальную сеть необходимо вставить SD-карту." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Код доступа:%s IP-адрес:%s" -msgid "Sending gcode file over LAN" -msgstr "Отправка файла G-кода по локальной сети" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "Отправка файла G-кода на SD-карту" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "Отправка G-код файла по локальной сети" + +msgid "Sending G-code file to SD card" +msgstr "Отправка G-код файла на SD-карту" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" -msgstr "Успешно отправлено. Закрытие текущей страницы через %s с." +msgstr "Успешно отправлено. Закрытие текущей страницы через %s с" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Перед отправкой на принтер необходимо вставить SD-карту." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Импорт SLA архива" @@ -2744,7 +3137,8 @@ msgstr "" "использовались в качестве резервных." msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "Вы не можете загрузить SLA проект с составной моделью на столе" +msgstr "" +"Вы не можете загрузить проект SLA с многокомпонентным объектом на столе" msgid "Please check your object list before preset changing." msgstr "Пожалуйста, проверьте список моделей перед изменением профиля." @@ -2758,17 +3152,17 @@ msgstr "Загрузка" msgid "Download failed" msgstr "Ошибка загрузки" -msgid "Cancelled" +msgid "Canceled" msgstr "Отменено" -msgid "Install successfully." -msgstr "Установка успешно завершена." +msgid "Installed successfully" +msgstr "Успешно установлено" msgid "Installing" msgstr "Установка" msgid "Install failed" -msgstr "Ошибка установки." +msgstr "Ошибка установки" msgid "Portions copyright" msgstr "С использованием разработок" @@ -2785,8 +3179,8 @@ msgstr "Snapmaker Orca распространяется под лицензие msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public третьей версии" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca основан на PrusaSlicer и BambuStudio" msgid "Libraries" msgstr "Библиотеки" @@ -2797,15 +3191,12 @@ msgid "" msgstr "" "В данном программном обеспечении используются компоненты с открытым исходным " "кодом, авторские и иные права на которые принадлежат их соответствующим " -"владельцам." +"владельцам" #, c-format, boost-format msgid "About %s" msgstr "О %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca основан на проектах BambuStudio, PrusaSlicer и SuperSlicer." @@ -2826,7 +3217,7 @@ msgid "Version" msgstr "Версия" msgid "AMS Materials Setting" -msgstr "Настройка материалов АСПП" +msgstr "Настройка материалов AMS" msgid "Confirm" msgstr "Подтвердить" @@ -2834,9 +3225,6 @@ msgstr "Подтвердить" msgid "Close" msgstr "Закрыть" -msgid "Colour" -msgstr "Цвет" - msgid "" "Nozzle\n" "Temperature" @@ -2845,20 +3233,17 @@ msgstr "" "сопла" msgid "max" -msgstr "макс." +msgstr "макс" msgid "min" -msgstr "мин." +msgstr "мин" #, boost-format msgid "The input value should be greater than %1% and less than %2%" -msgstr "Введённое значение должно быть больше %1%, но меньше %2%." +msgstr "Введённое значение должно быть больше %1%, но меньше %2%" msgid "SN" -msgstr "Серийный №" - -msgid "Setting AMS slot information while printing is not supported" -msgstr "Изменение информации о слотах АСПП во время печати не поддерживается" +msgstr "Серийный номер" msgid "Factors of Flow Dynamics Calibration" msgstr "Коэф. калиб. динам. потока" @@ -2872,12 +3257,15 @@ msgstr "Коэф. K" msgid "Factor N" msgstr "Коэф. N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Изменение информации о слотах AMS во время печати не поддерживается" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "Настройка информации виртуального слота во время печати не поддерживается" msgid "Are you sure you want to clear the filament information?" -msgstr "Вы уверены, что хотите удалить информацию о пластиковой нити?" +msgstr "Вы уверены, что хотите удалить информацию о филаменте?" msgid "You need to select the material type and color first." msgstr "Сначала необходимо выбрать тип материала и цвет." @@ -2892,6 +3280,15 @@ msgstr "" "Пожалуйста, введите допустимое значение (K в диапазоне %.1f~%.1f, N в " "диапазоне %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Другой цвет" @@ -2906,10 +3303,9 @@ msgid "" "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"Температура сопла и максимальный объёмный расход влияют на результаты " -"калибровки. Введите те же значения, которые вы используете при фактической " -"печати. Их можно заполнить автоматически, выбрав существующий профиль " -"пластиковой нити." +"Температура сопла и максимальная объёмная скорость повлияют на результаты " +"калибровки. Пожалуйста, заполните те же значения, что и для фактической " +"печати. ​​Их можно заполнить автоматически, выбрав предустановку филамента." msgid "Nozzle Diameter" msgstr "Диаметр сопла" @@ -2926,15 +3322,9 @@ msgstr "Температура стола" msgid "Max volumetric speed" msgstr "Макс. объёмный расход" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Температура стола" -msgid "mm³" -msgstr "мм³" - # Если короче - Запуск калибровки msgid "Start calibration" msgstr "Запустить калибровку" @@ -2977,33 +3367,96 @@ msgstr "Калибровка динамики потока" msgid "Step" msgstr "Шаг" -msgid "AMS Slots" -msgstr "Слоты АСПП" +msgid "Unmapped" +msgstr "" -# Примечание: выбор слотов ограничен одним типом материала. msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "Примечание: можно выбирать только слоты с одинаковым типом материала." +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + +msgid "AMS Slots" +msgstr "Слоты AMS" + +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "Левый AMS" + +msgid "External" +msgstr "Внешние" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "Правый AMS" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Сопло" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" -msgstr "Включить АСПП" +msgstr "Включить AMS" msgid "Print with filaments in the AMS" -msgstr "Печать пластиковыми нитями из АСПП." +msgstr "Печать филаментами из AMS" msgid "Disable AMS" -msgstr "Отключить АСПП" +msgstr "Отключить AMS" msgid "Print with the filament mounted on the back of chassis" -msgstr "Печать материалом, установленным на задней части корпуса." - -msgid "Current Cabin humidity" -msgstr "Текущая влажность внутри АСПП" +msgstr "Печать материалом, установленным на задней части корпуса" msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Пожалуйста, замените влагопоглотитель, если он слишком влажный. Индикатор " @@ -3012,36 +3465,43 @@ msgstr "" "температура окружающей среды также замедляют этот процесс." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" -"Задайте слот АСПП, который должен использоваться для прутка, используемого в " -"текущем задании." +"Задайте слот AMS, который должен использоваться для филамента, используемого " +"в текущем задании." msgid "Filament used in this print job" -msgstr "Пруток используемый в этом задании" +msgstr "Филамент используемый в этом задании" # убрал АСПП ибо длинно msgid "AMS slot used for this filament" -msgstr "Слот используемый для этого прутка" +msgstr "Слот AMS используемый для этого филамента" # убрал АСПП ибо длинно msgid "Click to select AMS slot manually" -msgstr "Нажмите, чтобы выбрать слот вручную" +msgstr "Нажмите, чтобы выбрать слот AMS вручную" msgid "Do not Enable AMS" -msgstr "Не включать АСПП" +msgstr "Не включать AMS" msgid "Print using materials mounted on the back of the case" msgstr "" "Печать с использованием материала, установленного на задней части корпуса" -msgid "Print with filaments in ams" -msgstr "" -"Печать пластиковыми\n" -"нитями из АСПП" +msgid "Print with filaments in AMS" +msgstr "Печать филаментами из AMS" msgid "Print with filaments mounted on the back of the chassis" -msgstr "Печать материалами, установленными на задней части корпуса." +msgstr "Печать материалами, установленными на задней части корпуса" + +msgid "Auto Refill" +msgstr "Автодозаправка" + +msgid "Left" +msgstr "Слева" + +msgid "Right" +msgstr "Справа" msgid "" "When the current material run out, the printer will continue to print in the " @@ -3050,28 +3510,31 @@ msgstr "" "Когда текущий материал закончится, принтер продолжит печать в указанном " "порядке." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Группа" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "В настоящее время принтер не поддерживает функцию автодозаправки." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"Резервирование материала АСПП не включено, пожалуйста, включите его в " -"настройках АСПП." +"Резервирование материала AMS не включено, пожалуйста, включите его в " +"настройках AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"При наличии в АСПП двух одинаковых материалов включается функция " -"резервирования материала (автодозаправка). \n" -"(В настоящее время поддерживается автоматическая дозаправка материала только " -"одного производителя, типа и цвета)" msgid "DRY" msgstr "СУХОЙ" @@ -3080,9 +3543,8 @@ msgid "WET" msgstr "ВЛАЖНЫЙ" msgid "AMS Settings" -msgstr "Настройки АСПП" +msgstr "Настройки AMS" -# ??? Обновление при вставке материала, Обновлять данные о материале при вставке msgid "Insertion update" msgstr "Обновлять данные при вставке материала" @@ -3090,66 +3552,63 @@ msgid "" "The AMS will automatically read the filament information when inserting a " "new Bambu Lab filament. This takes about 20 seconds." msgstr "" -"АСПП автоматически считывает информацию о материале при установке новой " +"AMS автоматически считывает информацию о материале при установке новой " "катушки Bambu. Это занимает около 20 секунд." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" -"Примечание: если во время печати вставляется новая пластиковая нить, АСПП " +"Примечание: если во время печати вставляется новый филамент, AMS " "автоматически считает информацию о ней только по завершению печати." msgid "" "When inserting a new filament, the AMS will not automatically read its " "information, leaving it blank for you to enter manually." msgstr "" -"При вставке новой пластиковой нити, АСПП не будет автоматически считывать " +"При вставке нового филамента, AMS не будет автоматически считывать " "информацию о ней, оставляя поле пустым, чтобы пользователь мог ввести данные " "о ней вручную." -# ??? Обновление при включении принтера, Обновлять данные о материале при включении принтера msgid "Power on update" msgstr "Обновлять данные при включении принтера" +# ??? было При включении принтера АСПП будет автоматически считывать информацию о вставленных материалах. Это занимает около одной минуты. В процессе считывания информации о материале катушка вращается. msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" -"При каждом включении принтера АСПП будет автоматически считывать информацию " -"о вставленных материалах. Это занимает приблизительно одну минуту. В " -"процессе считывания информации о материале катушка вращается." +"AMS будет автоматически считывать информацию о вставленных материалах при " +"включении принтера. Это занимает около одной минуты. В процессе считывания " +"информации о материале катушка вращается." +# ??? было При каждом включении принтера, считывание информации о вставленных материалах АСПП будет отключено. Будет использоваться информация, полученная перед последним выключением. msgid "" "The AMS will not automatically read information from inserted filament " "during startup and will continue to use the information recorded before the " "last shutdown." msgstr "" -"При каждом включении принтера, считывание информации о вставленных " -"материалах АСПП будет отключено. Будет использоваться информация, полученная " -"перед последним выключением." +"AMS не будет автоматически считывать информацию о вставленных материалах при " +"включении принтера и продолжит использовать данные, записанные перед " +"последним выключением." msgid "Update remaining capacity" msgstr "Обновлять оставшуюся ёмкость катушки" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"АСПП считывает информацию о материале Bambu и рассчитывает его остаточную " -"ёмкость на катушке. Остаточная ёмкость обновляется автоматически в процессе " -"печати." msgid "AMS filament backup" -msgstr "Резервирование материала АСПП" +msgstr "Резервирование материала AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" -"АСПП автоматически переключится на другую катушку с тем же типом материала, " +"AMS автоматически переключится на другую катушку с тем же типом материала, " "когда текущий закончится." msgid "Air Printing Detection" @@ -3159,7 +3618,7 @@ msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"При обнаружении засорения сопла или истирания прутка, печать немедленно " +"При обнаружении засорения сопла или истирания филамента, печать немедленно " "прекращается для экономии времени и материала." msgid "File" @@ -3173,7 +3632,7 @@ msgid "" "software, check and retry." msgstr "" "Не удалось загрузить плагин. Пожалуйста, проверьте настройки брандмауэра и " -"vpn, и повторите попытку." +"VPN и повторите попытку." msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " @@ -3183,7 +3642,7 @@ msgstr "" "или не удалён антивирусом." msgid "click here to see more info" -msgstr "Нажмите здесь, чтобы увидеть больше информации" +msgstr "нажмите здесь, чтобы увидеть больше информации" msgid "Please home all axes (click " msgstr "Пожалуйста, припаркуйте все оси в начало координат (нажав " @@ -3203,12 +3662,16 @@ msgid "" "program" msgstr "" "Произошла ошибка. Возможно, недостаточно системной памяти или это баг " -"программы." +"программы" -msgid "Please save project and restart the program. " -msgstr "Пожалуйста, сохраните проект и перезапустите программу. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Произошла критическая ошибка: \"%1%\"" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Пожалуйста, сохраните проект и перезапустите программу." + +msgid "Processing G-code from Previous file..." msgstr "Обработка G-кода из предыдущего файла..." msgid "Slicing complete" @@ -3239,10 +3702,10 @@ msgid "Running post-processing scripts" msgstr "Запуск скриптов постобработки" msgid "Successfully executed post-processing script" -msgstr "Скрипт постобработки успешно выполнен." +msgstr "Скрипт постобработки успешно выполнен" -msgid "Unknown error occured during exporting G-code." -msgstr "При экспорте G-кода произошла неизвестная ошибка." +msgid "Unknown error occurred during exporting G-code." +msgstr "При экспорте в G-код произошла неизвестная ошибка." #, boost-format msgid "" @@ -3294,12 +3757,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Файл G-кода экспортирован в %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Неизвестная ошибка при экспорте G-кода." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3318,233 +3781,6 @@ msgstr "" "Планирование загрузки на `%1%`. Смотрите Окна -> Очередь загрузки на хост " "печати" -msgid "Device" -msgstr "Принтер" - -msgid "Task Sending" -msgstr "Отправка заданий" - -msgid "Task Sent" -msgstr "Отправленные задания" - -msgid "Edit multiple printers" -msgstr "Редактирование нескольких принтеров" - -msgid "Select connected printers (0/6)" -msgstr "Выберите подключённые принтеры (%d/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Выберите подключённые принтеры (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "Максимальное количество принтеров, которое можно выбрать - %d" - -msgid "Offline" -msgstr "Не в сети" - -msgid "No task" -msgstr "Нет заданий" - -msgid "View" -msgstr "Вид" - -msgid "N/A" -msgstr "Н/Д" - -msgid "Edit Printers" -msgstr "Редактировать принтеры" - -msgid "Device Name" -msgstr "Имя устройства" - -msgid "Task Name" -msgstr "Имя задания" - -msgid "Device Status" -msgstr "Статус устройства" - -msgid "Actions" -msgstr "Действия" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Пожалуйста, выберите устройства, которыми хотите управлять (до 6 устройств)" - -msgid "Add" -msgstr "Добавить" - -msgid "Idle" -msgstr "Простой" - -msgid "Printing" -msgstr "Печать" - -msgid "Upgrading" -msgstr "Обновление" - -msgid "Incompatible" -msgstr "Несовместимы" - -msgid "syncing" -msgstr "синхронизация" - -msgid "Printing Finish" -msgstr "Печать завершена" - -msgid "Printing Failed" -msgstr "Ошибка печати" - -msgid "Printing Pause" -msgstr "Пауза печати" - -msgid "Prepare" -msgstr "Подготовка" - -msgid "Slicing" -msgstr "Нарезка" - -msgid "Pending" -msgstr "Ожидание" - -msgid "Sending" -msgstr "Отправка" - -msgid "Sending Finish" -msgstr "Отправка завершена" - -msgid "Sending Cancel" -msgstr "Отправка отменена" - -msgid "Sending Failed" -msgstr "Ошибка отправки" - -msgid "Print Success" -msgstr "Успешно напечатано" - -msgid "Print Failed" -msgstr "Ошибка печати" - -msgid "Removed" -msgstr "Удалено" - -msgid "Resume" -msgstr "Продолжить" - -msgid "Stop" -msgstr "Остановить" - -msgid "Task Status" -msgstr "Статус задания" - -msgid "Sent Time" -msgstr "Время отправки" - -msgid "There are no tasks to be sent!" -msgstr "Нет заданий для отправки!" - -msgid "No historical tasks!" -msgstr "История заданий пуста!" - -msgid "Loading..." -msgstr "Загрузка..." - -msgid "No AMS" -msgstr "АСПП отсутствует" - -msgid "Send to Multi-device" -msgstr "Отправить на несколько устройств" - -msgid "Preparing print job" -msgstr "Подготовка задания на печать" - -msgid "Abnormal print file data. Please slice again" -msgstr "Неправильные данные файла печати. Пожалуйста, нарежьте ещё раз." - -msgid "There is no device available to send printing." -msgstr "Отсутствует устройство для отправки на печать." - -# ??? для начала печати необходимо, чтобы хотя бы один принтер был активен? -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" -"Необходимость наличия хотя бы одного работающего принтера для выполнения " -"задач печати." - -msgid "Use External Spool" -msgstr "Исп. внешнюю катушку" - -msgid "Use AMS" -msgstr "Исп. АСПП" - -msgid "Select Printers" -msgstr "Выбор принтеров" - -msgid "Ams Status" -msgstr "Статус АСПП" - -msgid "Printing Options" -msgstr "Параметры печати" - -msgid "Bed Leveling" -msgstr "" -"Выравнивание\n" -"стола" - -msgid "Timelapse" -msgstr "Таймлапсы" - -msgid "Flow Dynamic Calibration" -msgstr "Калибровка динамики потока" - -msgid "Send Options" -msgstr "Параметры отправки" - -msgid "Send to" -msgstr "Отправить на" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"принтера(-ов) одновременно (зависит от того, сколько устройств может " -"нагреваться одновременно без перегрузки вашей электросети.)" - -msgid "Wait" -msgstr "Ждать" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"минут для отправки каждого пакета заданий (зависит от того, сколько времени " -"требуется для завершения нагрева перед началом печати)." - -# ??????? Используется в двух местах или уже исправили? -msgid "Send" -msgstr "Отправить G-код стола на SD-карту" - -msgid "Name is invalid;" -msgstr "Некорректное имя;" - -msgid "illegal characters:" -msgstr "недопустимые символы:" - -msgid "illegal suffix:" -msgstr "недопустимый суффикс:" - -msgid "The name is not allowed to be empty." -msgstr "Имя не может быть пустым." - -msgid "The name is not allowed to start with space character." -msgstr "Имя не должно начитаться с пробела." - -msgid "The name is not allowed to end with space character." -msgstr "Имя не должно заканчиваться пробелом." - -msgid "The name length exceeds the limit." -msgstr "Длина имени превышает установленное ограничение." - msgid "Origin" msgstr "Начало координат" @@ -3603,7 +3839,7 @@ msgstr "Выбранный файл не содержит геометрии." msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" -"Выбранный файл содержит несколько не пересекающихся областей. Такие файлы не " +"Выбранный файл содержит несколько непересекающихся областей. Такие файлы не " "поддерживаются." msgid "Choose a file to import bed texture from (PNG/SVG):" @@ -3615,12 +3851,13 @@ msgstr "Выберите STL файл для импорта формы стол msgid "Bed Shape" msgstr "Форма стола" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Минимально рекомендуемая температура меньше 190 градусов или максимально " -"рекомендуемая температура выше 300 градусов.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3643,39 +3880,39 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" -"Рекомендуемая температура сопла для данного типа пластиковой нити составляет " -"[%d, %d] градусов Цельсия." +"Рекомендуемая температура сопла для данного типа филамента составляет [%d, " +"%d] градусов Цельсия." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Слишком маленький максимальный объёмный расход.\n" "Значение будет сброшено на 0,5." #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " -"экструдера. Безопасная температура текущего материала составляет %d." +"экструдера. Безопасная температура текущего материала составляет %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Слишком маленькая высота слоя.\n" "Значение будет сброшено на 0,2." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Слишком маленькое расстояние между линиями разглаживания.\n" "Значение будет сброшено на 0,1." @@ -3722,16 +3959,16 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"Чередующаяся дополнительная стенка не работает, если для \"Обеспечивать " -"верт. толщину оболочки\" установлено значение «Везде»." +"Чередующаяся дополнительная стенка не работает, если для «Сохранение толщины " +"вертикальной оболочки» установлено значение «Все»." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "Изменить эти настройки автоматически?\n" "Да - Изменить в «Обеспечивать верт. толщину оболочки» на значение " @@ -3775,13 +4012,6 @@ msgstr "" "ДА - Сохранить черновую башню\n" "НЕТ - Сохранить независимую высоту слоя поддержки" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"При печати по очереди экструдер может столкнуться с юбкой.\n" -"Чтобы избежать этого, сбросьте значение слоёв юбки до 1." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." @@ -3789,55 +4019,76 @@ msgstr "" "seam_slope_start_height должна быть меньше высоты слоя.\n" "Значение сброшено на 0." +#, fuzzy, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"Глубина блокировки должна быть меньше глубины скин-слоя.\n" +"Сбросьте значение до 50% от глубины скин-слоя." + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Для режимов [Экструзия] и [Комбинированный] эффекта нечеткой кожи требуется " +"включение генератора стенок Arachne." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Изменить эти настройки автоматически?\n" +"Да - Включить генератор стенок Atachne\n" +"Нет - Отключить генератор стенок Arachne и установить режим [Смещение] для " +"нечеткой оболочки" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Для режима печати «Спиральная ваза» необходимо чтобы соблюдались следующие " -"условия:\n" -"- одностеночный периметр\n" -"- отсутствие поддержки\n" -"- отсутствие верхних сплошных слоёв\n" -"- плотность заполнения 0%\n" -"- отключено «Обнаружение тонких стенок»\n" -"- Режим записи таймлапсов - обычный режим" msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Но принтеры с кинематикой I3 не будут писать таймлапс." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Изменить эти настройки автоматически? \n" +"Изменить эти настройки автоматически?\n" "Да - Изменить эти настройки и включить режим «Спиральная ваза»\n" "Нет - Отказаться от использования режима «Спиральная ваза»" +msgid "Printing" +msgstr "Идёт печать" + msgid "Auto bed leveling" msgstr "Автовыравнивание стола" msgid "Heatbed preheating" msgstr "Преднагрев стола" -# Режим проверки XY-механики -msgid "Sweeping XY mech mode" -msgstr "Проверка XY-механики" +msgid "Vibration compensation" +msgstr "Компенсация вибрации" msgid "Changing filament" -msgstr "Смена прутка" +msgstr "Смена филамента" msgid "M400 pause" msgstr "M400 (пауза)" -msgid "Paused due to filament runout" -msgstr "Пауза при окончании прутка" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Нагрев хотэнда" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Калибровка экструзии" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Сканирование поверхности стола" @@ -3860,82 +4111,139 @@ msgstr "Очистка кончика сопла" msgid "Checking extruder temperature" msgstr "Проверка температуры экструдера" -msgid "Printing was paused by the user" -msgstr "Печать приостановлена пользователем" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Пауза при падения передней крышки с головы" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Калибровка микролидаром" -msgid "Calibrating extrusion flow" -msgstr "Калибровка потока экструзии" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Пауза при неисправности температуры сопла" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Пауза при неисправности температуры стола" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" -msgstr "Выгрузка прутка" +msgstr "Выгрузка филамента" -msgid "Skip step pause" -msgstr "Пропуск команды паузы" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" -msgstr "Загрузка прутка" +msgstr "Загрузка филамента" -msgid "Motor noise calibration" -msgstr "Калибровка шума двигателя" +msgid "Motor noise cancellation" +msgstr "Шумоподавление двигателя" -msgid "Paused due to AMS lost" -msgstr "Печать приостановлена из-за потери связи с АСПП" - -msgid "Paused due to low speed of the heat break fan" +msgid "Pause (AMS offline)" msgstr "" -"Печать приостановлена из-за низкой скорости вентилятора обдува радиатора " -"головы" -msgid "Paused due to chamber temperature control error" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" + +msgid "Pause (chamber temperature control problem)" msgstr "" -"Печать приостановлена из-за ошибки контроля температуры внутри термокамеры" msgid "Cooling chamber" msgstr "Охлаждение термокамеры" -msgid "Paused by the Gcode inserted by user" -msgstr "Печать приостановлена G-кодом, вставленным пользователем" +msgid "Pause (G-code inserted by user)" +msgstr "" # ??? Демонстрация шума двигателя msgid "Motor noise showoff" msgstr "Результат калибровки шума двигателя" -msgid "Nozzle filament covered detected pause" -msgstr "Пауза при обнаружении протечки материала" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Пауза при ошибке обрезки прутка" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Пауза при ошибке на первом слое" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Пауза при засорении сопла" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Неизвестно" -msgid "Fatal" -msgstr "Критическая ошибка" - -msgid "Serious" -msgstr "Серьезный" - -msgid "Common" -msgstr "Обычный" - msgid "Update successful." msgstr "Обновление успешно выполнено." @@ -3948,35 +4256,58 @@ msgstr "Ошибка идентификации." msgid "Update failed." msgstr "Сбой обновления." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"Текущая температура или целевая температура внутри термокамеры превышает " -"45℃. Чтобы избежать засорения экструдера, запрещается загрузка " -"низкотемпературной печатной нити (PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"В экструдер загружается низкотемпературная пластиковая нить (PLA/PETG/TPU). " -"Чтобы избежать засорения экструдера, запрещается устанавливать температуру " -"внутри термокамеры выше 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Если вы установили температура внутри термокамеры ниже 40℃, то контроль " "температуры не запустится, а целевая температура в ней будет автоматически " -"установлена на 0℃." +"установлена ​​на 0℃." -msgid "Failed to start printing job" -msgstr "Не удалось запустить задание на печать." +msgid "Failed to start print job" +msgstr "Не удалось запустить задание на печать" msgid "" "This calibration does not support the currently selected nozzle diameter" @@ -3988,34 +4319,84 @@ msgstr "Текущая величина калибровки скорости п msgid "Selected diameter and machine diameter do not match" msgstr "Выбранный диаметр и диаметр профиля принтера не совпадают" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Не удалось сгенерировать калибровочный G-код" msgid "Calibration error" msgstr "Ошибка калибровки" -msgid "TPU is not supported by AMS." -msgstr "Печать TPU с помощью АСПП не поддерживается." +msgid "Resume Printing" +msgstr "Возобновить печать" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Печать Bambu PET-CF/PA6-CF с помощью АСПП не поддерживается." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Влажный PVA становится гибким и застревает внутри АСПП, поэтому перед " -"использованием его необходимо просушить." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" msgstr "" -"CF/GF пластиковые нити твердые и хрупкие, легко ломаются или застревают в " -"АСПП, поэтому используйте их с осторожностью." +msgid "Stop Printing" +msgstr "Остановить печать" + +# ??? Перейти к помощнику, Помощник по проверке +msgid "Check Assistant" +msgstr "Ассистент проверки" + +msgid "Filament Extruded, Continue" +msgstr "Филамент выдавлен, Продолжить" + +msgid "Not Extruded Yet, Retry" +msgstr "Филамент ещё не выдавлен, Повторить" + +# ????? Готово +msgid "Finished, Continue" +msgstr "Завершено, Продолжить" + +# кнопка в интерфейсе +msgid "Load Filament" +msgstr "Загрузить" + +msgid "Filament Loaded, Resume" +msgstr "Филамент загружен, Продолжить" + +msgid "View Liveview" +msgstr "Посмотреть камеру" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Готово" + +msgid "Retry" +msgstr "Повтор" + +msgid "Resume" +msgstr "Продолжить" + +msgid "Unknown error." +msgstr "" + +# отображается в Моделях msgid "default" -msgstr "По ум." +msgstr "по умолчанию" #, boost-format msgid "Edit Custom G-code (%1%)" @@ -4023,10 +4404,10 @@ msgstr "Изменение пользовательского G-кода (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -"Встроенные заполнители. Для добавить его в G-код, дважды щелкните на " +"Встроенные заполнители. Для добавления его в G-код, дважды нажмите на " "выбранное." -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Поиск G-кода в заполнителях" msgid "Add selected placeholder to G-code" @@ -4051,7 +4432,7 @@ msgid "Print Statistics" msgstr "Статистика печати" msgid "Objects Info" -msgstr "Информация об моделях" +msgstr "Информация о моделях" msgid "Dimensions" msgstr "Размеры" @@ -4073,7 +4454,7 @@ msgid "Print settings" msgstr "Настройки печати" msgid "Filament settings" -msgstr "Настройки прутка" +msgstr "Настройки филамента" msgid "SLA Materials settings" msgstr "Настройки SLA материалов" @@ -4082,10 +4463,10 @@ msgid "Printer settings" msgstr "Настройки принтера" msgid "parameter name" -msgstr "Имя параметра" +msgstr "имя параметра" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s не может быть в процентах" #, c-format, boost-format @@ -4128,10 +4509,29 @@ msgstr "Введённое значение вне диапазона" msgid "Some extension in the input is invalid" msgstr "Недопустимое расширение на входе" +msgid "This parameter expects a valid template." +msgstr "Этот параметр ожидает допустимый шаблон." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" +"Недопустимый шаблон. Используйте N, N#K или список, разделённый запятыми, с " +"необязательным #K для каждой записи. Примеры: 5, 5#2, 1,7,9, 5,9#2,18." + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Недопустимый формат. Ожидаемый векторный формат: \"%1%\"" +msgid "N/A" +msgstr "Н/Д" + +msgid "Pick" +msgstr "Выбрать" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Высота слоя" @@ -4141,9 +4541,6 @@ msgstr "Ширина экструзии" msgid "Fan Speed" msgstr "Скорость вентилятора" -msgid "Temperature" -msgstr "Температура" - msgid "Flow" msgstr "Поток" @@ -4177,7 +4574,7 @@ msgstr "Скорость вентилятора: " msgid "Temperature: " msgstr "Температура: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Загрузка G-кода" msgid "Generating geometry vertex data" @@ -4192,8 +4589,9 @@ msgstr "Статистика по всем столам" msgid "Display" msgstr "Видимость" +# в результате нарезки это, в профиле прутка msgid "Flushed" -msgstr "Очищено" +msgstr "Очистка" msgid "Tower" msgstr "Башня" @@ -4211,6 +4609,72 @@ msgstr "Общее время печати" msgid "Total cost" msgstr "Общая стоимость" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Подсказки:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Подсказки" + msgid "up to" msgstr "до" @@ -4220,17 +4684,11 @@ msgstr "после" msgid "from" msgstr "с" -msgid "Color Scheme" -msgstr "Цветовая схема" - msgid "Time" msgstr "Время" -msgid "Percent" -msgstr "%" - -msgid "Used filament" -msgstr "Использ. прутка" +msgid "Usage" +msgstr "Использование" msgid "Layer Height (mm)" msgstr "Высота слоя (мм)" @@ -4257,13 +4715,13 @@ msgid "Seams" msgstr "Швы" msgid "Retract" -msgstr "Откат" +msgstr "Ретракт" msgid "Unretract" msgstr "Подача" msgid "Filament Changes" -msgstr "Смена прутка" +msgstr "Смена филамента" msgid "Wipe" msgstr "Очистка" @@ -4272,17 +4730,19 @@ msgid "Options" msgstr "Параметры" msgid "travel" -msgstr "Перемещения" +msgstr "перемещения" msgid "Extruder" msgstr "Экструдер" -msgid "Filament change times" -msgstr "Время смены прутка" - msgid "Cost" msgstr "Стоимость" +# в результате нарезки это, в профиле прутка +# ??? Число смен материалов +msgid "Filament change times" +msgstr "Время замены филамента" + msgid "Color change" msgstr "Смена цвета" @@ -4291,12 +4751,9 @@ msgstr "Печать" # ?????6 msgid "Printer" -msgstr "Профиль принтера" +msgstr "Принтер" -msgid "Custom g-code" -msgstr "Пользовательский G-код" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Смена инструмента" msgid "Time Estimation" @@ -4306,10 +4763,10 @@ msgid "Normal mode" msgstr "Нормальный режим" msgid "Total Filament" -msgstr "Всего использовано прутка" +msgstr "Всего филамента" msgid "Model Filament" -msgstr "Исп. прутка для моделей" +msgstr "Использование филамента для моделей" msgid "Prepare time" msgstr "Время подготовки" @@ -4323,6 +4780,23 @@ msgstr "Переключиться на бесшумный режим" msgid "Switch to normal mode" msgstr "Переключиться на обычный режим" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"Объект находится за пределами печатающей пластины или превышает допустимую " +"высоту.\n" +"Решите проблему, полностью переместив его на пластину или сняв с неё, " +"убедившись, что высота находится в пределах объёма построения." + msgid "Variable layer height" msgstr "Переменная высота слоёв" @@ -4341,27 +4815,15 @@ msgstr "Радиус" msgid "Keep min" msgstr "Сохранять минимумы" -msgid "Left mouse button:" -msgstr "Левая кнопка мыши:" - msgid "Add detail" msgstr "Увеличить детализацию" -msgid "Right mouse button:" -msgstr "Правая кнопка мыши:" - msgid "Remove detail" msgstr "Уменьшить детализацию" -msgid "Shift + Left mouse button:" -msgstr "Shift + Левая кнопка мыши:" - msgid "Reset to base" msgstr "Сброс до базовой высоты слоя" -msgid "Shift + Right mouse button:" -msgstr "Shift + Правая кнопка мыши:" - msgid "Smoothing" msgstr "Сглаживание" @@ -4374,14 +4836,63 @@ msgstr "Увелич. /уменьш. области редактирования msgid "Sequence" msgstr "Последовательность" +msgid "object selection" +msgstr "выбор объекта" + +msgid "part selection" +msgstr "выбор детали" + +msgid "number keys" +msgstr "цифровые клавиши" + +msgid "number keys can quickly change the color of objects" +msgstr "цифровые клавиши могут быстро менять цвет объектов" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Отразить модель" msgid "Tool Move" -msgstr "Инструмент перемещения" +msgstr "Перемещение инструмента" msgid "Tool Rotate" -msgstr "Инструмент вращения" +msgstr "Вращение инструмента" msgid "Move Object" msgstr "Перемещение модели" @@ -4417,13 +4928,27 @@ msgid "Avoid extrusion calibration region" msgstr "Избегать зону калибровки экструзии" msgid "Align to Y axis" -msgstr "Выравнивать по оси Y" +msgstr "Выравнить по оси Y" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Добавить" msgid "Add plate" msgstr "Добавить стол" -msgid "Auto orient" -msgstr "Автоориентация" +msgid "Auto orient all/selected objects" +msgstr "Автоориентация всех/выбранных моделей" + +msgid "Auto orient all objects on current plate" +msgstr "Автоориентация всех моделей на текущей печатной пластине" msgid "Arrange all objects" msgstr "Расставить все модели" @@ -4443,12 +4968,30 @@ msgstr "Сборочный вид" msgid "Select Plate" msgstr "Выбор печатной пластины" +msgid "Slicing" +msgstr "Нарезка" + +msgid "Slice all" +msgstr "Нарезать все столы" + +msgid "Failed" +msgstr "Ошибка" + +msgid "All Plates" +msgstr "Все печатные пластины" + +msgid "Stats" +msgstr "Статистика" + msgid "Assembly Return" msgstr "Выйти из сборки" -msgid "return" +msgid "Return" msgstr "Назад" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "Панель рисования" @@ -4461,6 +5004,9 @@ msgstr "Отсечение вида" msgid "Assemble Control" msgstr "Управление сборкой" +msgid "Selection Mode" +msgstr "Режим выбора" + msgid "Total Volume:" msgstr "Общий объём:" @@ -4475,36 +5021,74 @@ msgstr "Размер:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" "В G-коде на %d слое (z = %.2lf мм) обнаружен конфликт путей. Пожалуйста, " "разместите конфликтующие модели дальше друг от друга (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Модель выходить за границы печатного стола." msgid "A G-code path goes beyond the max print height." msgstr "Траектория перемещения в G-коде превышает высоту области печати." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Траектория перемещения в G-коде выходит за границы печатного стола." -msgid "Only the object being edit is visible." -msgstr "При редактировании, те модели с которыми вы не работаете скрываются." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "Модели с которыми вы не работаете при редактировании скрываются." + +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Модель выходит за границы стола или превышает высоту печати.\n" -"Пожалуйста, устраните проблему, уместив всю модель в границы стола (или за " -"пределы стола) и убедитесь, что высота модели находится в пределах область " -"построения." msgid "Calibration step selection" -msgstr "Выбор шага калибровки" +msgstr "Выбор шагов калибровки" msgid "Micro lidar calibration" msgstr "Калибровка микролидаром" @@ -4512,11 +5096,8 @@ msgstr "Калибровка микролидаром" msgid "Bed leveling" msgstr "Выравнивание стола" -msgid "Vibration compensation" -msgstr "Компенсация вибрации" - -msgid "Motor noise cancellation" -msgstr "Шумоподавление двигателя" +msgid "High-temperature Heatbed Calibration" +msgstr "" # ??? О калибровке msgid "Calibration program" @@ -4553,7 +5134,7 @@ msgstr "Автозапись мониторинга" msgid "Go Live" msgstr "Запустить трансляцию" -# ??? Повторить попытку просмотра , Попробовать перезапустить видеотрансляцию +# ??? Повторить попытку просмотра msgid "Liveview Retry" msgstr "Перезапустить видеотрансляцию" @@ -4573,25 +5154,21 @@ msgstr "Пользовательская камера" msgid "Show \"Live Video\" guide page." msgstr "Показать страницу руководства «Прямая трансляция»." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" -msgstr "Подключение принтера (локальная сеть)" +msgid "Connect Printer (LAN)" +msgstr "Подключение принтера (LAN)" msgid "Please input the printer access code:" msgstr "Пожалуйста, введите код доступа к принтеру:" -# ??? Перенёс на другую строку, проверить как отображается msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Вы можете найти его на принтере в разделе \n" -"Настройки > Сеть > Код подключения, как показано на рисунке:" msgid "Invalid input." msgstr "Неверный ввод." @@ -4611,10 +5188,16 @@ msgstr "Закрытие приложения, при имеющихся изм msgid "Logging" msgstr "Авторизация" +msgid "Prepare" +msgstr "Подготовка" + msgid "Preview" msgstr "Предпросмотр нарезки" -# ??? Управ. принтерами, Управ. устройствами, менеджер устройств, Диспетчер устройств, Принтеры +msgid "Device" +msgstr "Принтер" + +# ??? Управ. принтерами, менеджер принтеров, Диспетчер принтеров msgid "Multi-device" msgstr "Принтеры" @@ -4636,12 +5219,13 @@ msgstr "Нарезать стол" msgid "Print plate" msgstr "Распечатать стол" -msgid "Slice all" -msgstr "Нарезать все столы" - msgid "Export G-code file" msgstr "Экспорт в G-код" +# ??????? Используется в двух местах или уже исправили? +msgid "Send" +msgstr "Отправить G-код стола на SD-карту" + msgid "Export plate sliced file" msgstr "Экспорт стола в файл проекта" @@ -4654,6 +5238,9 @@ msgstr "Распечатать все столы" msgid "Send all" msgstr "Отправить G-код всех столов на SD-карту" +msgid "Send to Multi-device" +msgstr "Отправить на несколько устройств" + msgid "Keyboard Shortcuts" msgstr "Горячие клавиши" @@ -4670,7 +5257,7 @@ msgid "Show Tip of the Day" msgstr "Показать полезный совет" msgid "Check for Update" -msgstr "Проверка обновления" +msgstr "Проверка обновления программы" msgid "Open Network Test" msgstr "Проверка сети" @@ -4688,10 +5275,6 @@ msgstr "Загрузить модели" msgid "Default View" msgstr "Вид по умолчанию" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Сверху" - msgid "Top View" msgstr "Вид сверху" @@ -4714,15 +5297,9 @@ msgstr "Сзади" msgid "Rear View" msgstr "Вид сзади" -msgid "Left" -msgstr "Слева" - msgid "Left View" msgstr "Вид слева" -msgid "Right" -msgstr "Справа" - msgid "Right View" msgstr "Вид справа" @@ -4738,8 +5315,8 @@ msgstr "Начать новый проект" msgid "Open a project file" msgstr "Открыть файл проекта" -msgid "Recent projects" -msgstr "Недавние проекты" +msgid "Recent files" +msgstr "Недавние файлы" msgid "Save Project" msgstr "Сохранить проект" @@ -4750,26 +5327,23 @@ msgstr "Сохранить текущий проект в файл" msgid "Save Project as" msgstr "Сохранить проект как" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Сохранить текущий проект как" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" -msgstr "Импортировать 3MF/STL/STEP/SVG/OBJ/AMF" +msgstr "Импорт 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" msgstr "Загрузка модели" msgid "Import Zip Archive" -msgstr "Импортировать ZIP-архив" +msgstr "Импорт ZIP-архив" msgid "Load models contained within a zip archive" msgstr "Загрузка моделей, содержащихся в ZIP-архиве" msgid "Import Configs" -msgstr "Импортировать конфигурацию" +msgstr "Импорт профилей" msgid "Load configs" msgstr "Загрузка настроек" @@ -4786,8 +5360,8 @@ msgstr "Экспорт всех моделей в отдельные STL" msgid "Export Generic 3MF" msgstr "Экспорт в общий 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Экспорт в 3mf без использования 3mf-расширений" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Экспорт в 3MF без использования 3mf-расширений" msgid "Export current sliced file" msgstr "Экспортировать текущий нарезанный файл" @@ -4801,8 +5375,11 @@ msgstr "Экспорт в G-код" msgid "Export current plate as G-code" msgstr "Экспортировать текущие модели со стола в G-код" +msgid "Export toolpaths as OBJ" +msgstr "Экспортировать траекторию инструмента в OBJ" + msgid "Export Preset Bundle" -msgstr "Экспорт пакетов конфигурации" +msgstr "Экспорт пакета профилей" msgid "Export current configuration to files" msgstr "Экспортировать текущую конфигурацию в файл" @@ -4852,6 +5429,12 @@ msgstr "Копия выбранного" msgid "Clone copies of selections" msgstr "Сделать копию выбранного" +msgid "Duplicate Current Plate" +msgstr "Дублировать печатную пластину" + +msgid "Duplicate the current plate" +msgstr "Дублировать текущую печатную пластину" + msgid "Select all" msgstr "Выбрать всё" @@ -4870,18 +5453,28 @@ msgstr "Вид в перспективе" msgid "Use Orthogonal View" msgstr "Ортогональный вид" +msgid "Auto Perspective" +msgstr "Автоперспектива" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Автоматическое переключение между ортогональной и перспективной проекцией " +"при смене вида сверху/снизу/сбоку." + msgid "Show &G-code Window" msgstr "&Показать окно G-кода" -msgid "Show g-code window in Previce scene" -msgstr "Показать окно G-кода в окне предпросмотра" +msgid "Show G-code window in Preview scene." +msgstr "Показать окно G-кода в окне предпросмотра." msgid "Show 3D Navigator" msgstr "Показать навигационный куб" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" -"Показать навигационный куб в режиме подготовки и предварительного просмотра" +"Показать навигационный куб в режиме подготовки и предварительного просмотра." msgid "Reset Window Layout" msgstr "Сбросить настройки окон" @@ -4892,18 +5485,27 @@ msgstr "Восстановить расположение окон по умол msgid "Show &Labels" msgstr "Показать &имена файлов" -msgid "Show object labels in 3D scene" -msgstr "Показать имена моделей в 3D-сцене" +msgid "Show object labels in 3D scene." +msgstr "Показать имена моделей в 3D-сцене." msgid "Show &Overhang" -msgstr "Показать &нависания" +msgstr "Показать &Нависание" -msgid "Show object overhang highlight in 3D scene" -msgstr "Подсвечивать нависания у модели в окне подготовки" +msgid "Show object overhang highlight in 3D scene." +msgstr "Подсвечивать нависания у модели в окне подготовки." + +msgid "Show Selected Outline (beta)" +msgstr "Показать контур выбранной модели" + +msgid "Show outline around selected object in 3D scene." +msgstr "Отображение контура вокруг выбранных моделей в окне подготовки." msgid "Preferences" msgstr "Параметры" +msgid "View" +msgstr "Вид" + msgid "Help" msgstr "Помощь" @@ -4922,36 +5524,54 @@ msgstr "Проход 2" msgid "Flow rate test - Pass 2" msgstr "Тест скорости потока - 2-ой проход" +msgid "YOLO (Recommended)" +msgstr "YOLO (рекомендуется)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Калибровка скорости потока YOLO (шаг 0.01)" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (версия для перфекционистов)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Калибровка скорости потока YOLO (шаг 0.005)" + msgid "Flow rate" msgstr "Скорость потока" msgid "Pressure advance" -msgstr "Коэф. Pressure advance" +msgstr "Прогнозирование расхода" msgid "Retraction test" -msgstr "Тест откатов" - -msgid "Orca Tolerance Test" -msgstr "Тест допусков от Orca" +msgstr "Тест ретракта" msgid "Max flowrate" msgstr "Макс. объёмный расход" +msgid "Cornering" +msgstr "Cornering" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "Частота Input Shaping" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Затухание Input Shaping/Коэффициент затухания (ζ)" + +msgid "Input Shaping" +msgstr "Input Shaping" + msgid "VFA" msgstr "Тест на вертикальные артефакты (VFA)" -msgid "More..." -msgstr "Дополнительно..." - msgid "Tutorial" msgstr "Руководство" msgid "Calibration help" msgstr "Помощь в калибровке" -msgid "More calibrations" -msgstr "Больше калибровок" - msgid "&Open G-code" msgstr "&Открыть файл G-кода" @@ -4967,9 +5587,6 @@ msgstr "Перезагрузить стол с диска" msgid "Export &Toolpaths as OBJ" msgstr "Экспорт траектории &инструмента в OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Экспортировать траекторию инструмента в OBJ" - msgid "Open &Slicer" msgstr "Открыть &слайсер" @@ -4977,7 +5594,7 @@ msgid "Open Slicer" msgstr "Открыть слайсер" msgid "&Quit" -msgstr "В&ыход" +msgstr "&Выход" #, c-format, boost-format msgid "Quit %s" @@ -4993,16 +5610,20 @@ msgid "&Help" msgstr "&Помощь" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "Файл с именем %s уже существует. Перезаписать его?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Конфигурация с именем %s уже существует. Перезаписать её?" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Профиль с именем %s уже существует. Перезаписать его?" msgid "Overwrite file" msgstr "Перезаписать файл" +# ???? Перезаписать профиль +msgid "Overwrite config" +msgstr "Перезаписать конфигурацию" + msgid "Yes to All" msgstr "Да для всех" @@ -5015,12 +5636,12 @@ msgstr "Выберите папку" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" -msgstr[0] "Экспортирована %d конфигурация (только не системная)." -msgstr[1] "Экспортировано %d конфигурации (только не системные)." -msgstr[2] "Экспортировано %d конфигураций (только не системные)." +msgstr[0] "Экспортирован %d профиль (только не системный)." +msgstr[1] "Экспортировано %d профиля (только не системные)." +msgstr[2] "Экспортировано %d профилей (только не системные)." msgid "Export result" -msgstr "Результат экспортирования" +msgstr "Результат экспорта" msgid "Select profile to load:" msgstr "Выберите профиль для загрузки:" @@ -5029,9 +5650,9 @@ msgstr "Выберите профиль для загрузки:" msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "" "There are %d configs imported. (Only non-system and compatible configs)" -msgstr[0] "Импортирована %d конфигурация (только не системная и совместимая)." -msgstr[1] "Импортировано %d конфигурации (только не системные и совместимые)." -msgstr[2] "Импортировано %d конфигураций (только не системные и совместимые)." +msgstr[0] "Импортирован %d профиль (только не системный и совместимый)." +msgstr[1] "Импортировано %d профиля (только не системные и совместимые)." +msgstr[2] "Импортировано %d профилей (только не системные и совместимые)." msgid "" "\n" @@ -5043,19 +5664,19 @@ msgstr "" "соответствующий принтер." msgid "Import result" -msgstr "Импортировать результат" +msgstr "Результат импорта" msgid "File is missing" msgstr "Файл отсутствует" msgid "The project is no longer available." -msgstr "Проект больше не доступен." +msgstr "Проект больше недоступен." msgid "Filament Settings" -msgstr "Настройки прутка" +msgstr "Настройки филамента" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -5090,18 +5711,18 @@ msgstr "Пожалуйста, проверьте, подключен ли при msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." -msgstr "Сейчас идёт загрузка. Пожалуйста, повторите попытку после завершения." +msgstr "" +"В настоящее время принтер выполняет загрузку. Повторите попытку после " +"завершения." msgid "Printer camera is malfunctioning." msgstr "Камера принтера неисправна." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Возникла проблема. Пожалуйста, обновите прошивку принтера и повторите " "попытку." -# ??? Видеотрансляция, Трансляция с видеокамеры -# ??? Прямая трансляция для локальной сети отключена. Пожалуйста, включите её с экрана принтера. msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" @@ -5119,21 +5740,18 @@ msgstr "" "Не удалось установить соединение. Пожалуйста, проверьте сеть и повторите " "попытку" -# ??? Проверить влезает ли теперь. Или ещё короче - Проверьте сеть и повторите попытку. Если не помогло, перезагрузите или обновите принтер. msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Проверьте сеть и повторите попытку. Если не помогло, попробуйте " "перезагрузить или обновить принтер." -# ??? Принтер разлогинился и не может подключиться msgid "The printer has been logged out and cannot connect." msgstr "Принтер вышел из системы и не может подключиться." -# ??? Трансляция, видеотрансляция остановлена -msgid "Stopped." -msgstr "Трансляция с камеры остановлена." +msgid "Video Stopped." +msgstr "Видеотрансляция остановлена." # ??? Сбой подключения к локальной сети (не удалось запустить просмотр в реальном времени msgid "LAN Connection Failed (Failed to start liveview)" @@ -5144,7 +5762,7 @@ msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" -"Для этой задачи потребуется Virtual Camera Tools!\n" +"Для этой задачи требуется Virtual Camera Tools!\n" "Хотите установить?" msgid "Downloading Virtual Camera Tools" @@ -5172,6 +5790,9 @@ msgstr "Информация" msgid "Playing..." msgstr "Воспроизведение..." +msgid "Loading..." +msgstr "Загрузка..." + msgid "Year" msgstr "Год" @@ -5190,6 +5811,9 @@ msgstr "Группировать файлы по месяцам (по убыва msgid "Show all files, recent first." msgstr "Показать все файлы (недавние первые)" +msgid "Timelapse" +msgstr "Таймлапсы" + msgid "Switch to timelapse files." msgstr "Переключиться на файлы таймлапсов." @@ -5199,8 +5823,9 @@ msgstr "Видео" msgid "Switch to video files." msgstr "Переключиться на видеофайлы." -msgid "Switch to 3mf model files." -msgstr "Переключиться на файлы моделей в формате 3mf." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Переключиться на файлы моделей в формате 3MF." msgid "Delete selected files from printer." msgstr "Удалить выбранные файлы с принтера." @@ -5226,10 +5851,6 @@ msgstr "Перезагрузка списка файлов с принтера." msgid "No printers." msgstr "Принтеры отсутствуют." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Ошибка подключения [%d]!" - msgid "Loading file list..." msgstr "Загрузка списка файлов..." @@ -5239,28 +5860,16 @@ msgstr "Файлы отсутствуют" msgid "Load failed" msgstr "Ошибка загрузки" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Ошибка инициализации (подключённое устройство не готово)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"На текущей версии прошивки просмотр файлов на SD-карте не поддерживается. " -"Пожалуйста, обновите прошивку принтера." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "Ошибка инициализации (хранилище недоступно, вставьте SD-карту)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Сбой подключения к локальной сети (не удалось просмотреть sd-карту)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Просмотр файлов на SD-карте не поддерживается в режиме «Только LAN»." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Ошибка инициализации (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5286,7 +5895,7 @@ msgstr "Удалить файл '%s' с принтера?" msgid "Delete file" msgstr "Удалить файл" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Извлечение информации о модели..." msgid "Failed to fetch model information from printer." @@ -5296,11 +5905,11 @@ msgid "Failed to parse model information." msgstr "Не удалось обработать информацию о модели." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -"Файл .gcode.3mf не содержит G-кода. Пожалуйста, нарежьте его в программе " -"Snapmaker Orca и экспортируйте новый файл .gcode.3mf." +"Файл .gcode.3mf не содержит данных G-кода. Используя Snapmaker Orca нарежьте " +"его и экспортируйте в новый файл .gcode.3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5330,6 +5939,9 @@ msgstr "Загрузка завершена" msgid "Downloading %d%%..." msgstr "Загрузка %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5337,8 +5949,11 @@ msgstr "" "При повторном подключении принтера операция не может быть завершена " "немедленно, повторите попытку позже." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." -msgstr "Файла не существует." +msgstr "Файл не существует." msgid "File checksum error. Please retry." msgstr "Ошибка контрольной суммы файла. Повторите попытку." @@ -5346,13 +5961,47 @@ msgstr "Ошибка контрольной суммы файла. Повтор msgid "Not supported on the current printer version." msgstr "Не поддерживается в текущей версии принтера." -msgid "Storage unavailable, insert SD card." -msgstr "Накопитель недоступен, вставьте SD-карту." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Код ошибки: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Скорость:" @@ -5392,17 +6041,91 @@ msgstr "Инвертировать ось тангажа (X)" msgid "Invert Roll axis" msgstr "Инвертировать ось крена (Z)" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Поиск" + +msgid "My Device" +msgstr "Мой принтер" + +msgid "Other Device" +msgstr "Другое устройство" + +msgid "Online" +msgstr "В сети" + +msgid "Input access code" +msgstr "Введите код доступа" + +msgid "Can't find my devices?" +msgstr "Не удаётся найти свои принтеры?" + +msgid "Log out successful." +msgstr "Выход выполнен успешно." + +msgid "Offline" +msgstr "Не в сети" + +msgid "Busy" +msgstr "Занят" + +msgid "Modifying the device name" +msgstr "Изменение имени принтера" + +msgid "Name is invalid;" +msgstr "Некорректное имя;" + +msgid "illegal characters:" +msgstr "недопустимые символы:" + +msgid "illegal suffix:" +msgstr "недопустимый суффикс:" + +msgid "The name is not allowed to be empty." +msgstr "Имя не может быть пустым." + +msgid "The name is not allowed to start with space character." +msgstr "Имя не должно начинаться с пробела." + +msgid "The name is not allowed to end with space character." +msgstr "Имя не должно заканчиваться пробелом." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +# не длинно? +msgid "Bind with Pin Code" +msgstr "Привязать с помощью пин-кода" + +msgid "Bind with Access Code" +msgstr "Привязать с помощью кода доступа" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Прогресс печати" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Остановить" msgid "Layer: N/A" msgstr "Слой: Н/Д" msgid "Clear" -msgstr "Очистить" +msgstr "Сбросить" msgid "" "You have completed printing the mall model, \n" @@ -5426,8 +6149,8 @@ msgstr "Оценка" msgid "Camera" msgstr "Камера" -msgid "SD Card" -msgstr "SD-карта" +msgid "Storage" +msgstr "Память" msgid "Camera Setting" msgstr "Настройки камеры" @@ -5444,35 +6167,41 @@ msgstr "Части принтера" msgid "Print Options" msgstr "Настройки печати" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Свет" -msgid "Aux" -msgstr "Вспом." - -msgid "Cham" -msgstr "Выдув" - msgid "Bed" msgstr "Стол" msgid "Debug Info" msgstr "Отладочная информация" -msgid "No SD Card" -msgstr "Отсутствует SD-карта" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "Неисправность SD-карты" +msgid "No Storage" +msgstr "Нет памяти" + +msgid "Storage Abnormal" +msgstr "Память не в порядке" msgid "Cancel print" msgstr "Отмена печати" -msgid "Are you sure you want to cancel this print?" -msgstr "Вы уверены, что хотите отменить эту печать?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Принтер занят другим заданием." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Загрузка..." @@ -5493,27 +6222,25 @@ msgid "Layer: %d/%d" msgstr "Слой: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" -"Пожалуйста, перед загрузкой или выгрузкой прутка, нагрейте сопло до " +"Пожалуйста, перед загрузкой или выгрузкой филамента, нагрейте сопло до " "температуры выше 170°C." -msgid "Still unload" -msgstr "Ещё выгружается" - -msgid "Still load" -msgstr "Ещё загружается" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" -msgstr "Пожалуйста, выберите слот АСПП перед калибровкой" +msgstr "Пожалуйста, выберите слот AMS перед калибровкой" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " "unload the filament and try again." msgstr "" -"Не удаётся считать информацию о пластиковой нити. Пластиковая нить загружена " -"в голову, пожалуйста, выгрузите её и повторите попытку." +"Невозможно считать информацию о филаменте: филамент загружен в печатающую " +"голову, извлеките его и повторите попытку." msgid "This only takes effect during printing" msgstr "Применимо только во время печати" @@ -5530,8 +6257,19 @@ msgstr "Спортивный" msgid "Ludicrous" msgstr "Сумасшедший" -msgid "Can't start this without SD card." -msgstr "Невозможно запустить без SD-карты." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Оценить профиль печати" @@ -5552,25 +6290,20 @@ msgid "Submit" msgstr "Отправить" msgid "Please click on the star first." -msgstr "Пожалуйста, сначала нажмите на звездочку." - -msgid "InFo" -msgstr "Информация" +msgstr "Пожалуйста, сначала нажмите на звёздочку." msgid "Get oss config failed." -msgstr "" -"Не удалось получить конфигурацию OSS.\n" -"\n" -"Ошибка получения конфигурации OSS." +msgstr "Ошибка получения конфигурации OSS." -msgid "Upload Pictrues" -msgstr "Отправка изображений" +# ??? или Загрузка оставить? +msgid "Upload Pictures" +msgstr "Загрузка изображений" msgid "Number of images successfully uploaded" msgstr "Количество успешно отправленных изображений" msgid " upload failed" -msgstr " ошибка отправки" +msgstr " ошибка загрузки" msgid " upload config prase failed\n" msgstr " ошибка обработки конфигурации при отправке\n" @@ -5578,7 +6311,7 @@ msgstr " ошибка обработки конфигурации при отп msgid " No corresponding storage bucket\n" msgstr " Отсутствует хранилище данных\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " не удаётся открыть\n" msgid "" @@ -5591,7 +6324,7 @@ msgstr "" "\n" msgid "info" -msgstr "Информация" +msgstr "инфо" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "" @@ -5604,13 +6337,13 @@ msgid "obtaining instance_id failed\n" msgstr "не удалось получить instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" -"Ваш комментарий не может быть отправлен по некоторым причинам. Причины:\n" +"Ваш комментарий не может быть отправлен по следующим причинам:\n" "\n" -"Код ошибки: " +" Код ошибки: " msgid "error message: " msgstr "сообщение об ошибке: " @@ -5618,7 +6351,7 @@ msgstr "сообщение об ошибке: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5626,7 +6359,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Некоторые из ваших изображений не удалось загрузить. Хотите перейти на " "страницу для выставления оценки?" @@ -5636,7 +6369,7 @@ msgstr "Допускается выбор до 16 изображений." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Для выставления положительной оценки (4 или 5 звезд) требуется хотя бы одна " "успешная запись о печати данным профилем печати." @@ -5644,12 +6377,22 @@ msgstr "" msgid "Status" msgstr "Статус" +msgctxt "Firmware" msgid "Update" -msgstr "Обновление" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Больше не показывать" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "Ошибка %s" @@ -5677,14 +6420,16 @@ msgstr "Информация %s" msgid "Skip" msgstr "Пропустить" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "Новая версия 3mf" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" -"Версия этого 3mf файла сохранена в бета-версии приложения и она новее вашей " +"Версия этого 3MF файла сохранена в бета-версии приложения и она новее вашей " "текущей версии Snapmaker Orca." msgid "If you would like to try Snapmaker Orca Beta, you may click to" @@ -5693,12 +6438,14 @@ msgstr "Если хотите попробовать бета-версию Snapm msgid "Download Beta Version" msgstr "Скачать бета-версию" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." -msgstr "Версия файла 3mf новее, чем ваша текущая версия Snapmaker Orca." +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "Версия файла 3MF новее, чем ваша текущая версия Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Обновите Snapmaker Orca, чтобы включить все функции сохранённые в этом 3mf " +"Обновите Snapmaker Orca, чтобы включить все функции сохранённые в этом 3MF " "файле." msgid "Current Version: " @@ -5707,14 +6454,41 @@ msgstr "Текущая версия: " msgid "Latest Version: " msgstr "Последняя версия: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "Не сейчас" +msgid "Server Exception" +msgstr "Ошибка сервера" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Сервер не отвечает. Нажмите на ссылку ниже, чтобы проверить статус сервера." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Если отсутствует связь с сервером, то вы можете временно \n" +"использовать автономную печать или печать по локальной сети." + +msgid "How to use LAN only mode" +msgstr "Как использовать режим «Только LAN»" + +msgid "Don't show this dialog again" +msgstr "Не показывать снова" + msgid "3D Mouse disconnected." msgstr "3D-мышь отключена." +# Теперь профиль может быть обновлён msgid "Configuration can update now." -msgstr "Конфигурация может быть обновлена сейчас." +msgstr "Теперь профиль можно обновить." msgid "Detail." msgstr "Подробности." @@ -5735,10 +6509,10 @@ msgid "Details" msgstr "Подробности" msgid "New printer config available." -msgstr "Доступна новая конфигурация принтера." +msgstr "Доступен новый профиль принтера." msgid "Wiki" -msgstr "Вики-сайт" +msgstr "Wiki" msgid "Undo integration failed." msgstr "Не удалось отменить интеграцию." @@ -5762,8 +6536,8 @@ msgstr "Безопасное извлечение устройства." msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d модель имеет пользовательскую поддержку." -msgstr[1] "%1$d модели имеют пользовательские поддержки." -msgstr[2] "%1$d моделей имеют пользовательские поддержки." +msgstr[1] "%1$d модели имеют пользовательскую поддержку." +msgstr[2] "%1$d моделей имеют пользовательскую поддержку." #, c-format, boost-format msgid "%1$d Object has color painting." @@ -5774,11 +6548,18 @@ msgstr[2] "%1$d моделей окрашено." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "Загружена %1$d деталь, являющаяся частью разрезанной модели." msgstr[1] "Загружена %1$d детали, являющиеся частью разрезанной модели." msgstr[2] "Загружена %1$d деталей, являющиеся частью разрезанной модели." +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d модель была загружена с нарисованной нечеткой оболочкой." +msgstr[1] "%1$d модели были загружены с нарисованной нечеткой оболочкой." +msgstr[2] "%1$d моделей было загружено с нарисованной нечеткой оболочкой." + msgid "ERROR" msgstr "ОШИБКА" @@ -5800,17 +6581,17 @@ msgstr "Ошибка:" msgid "Warning:" msgstr "Предупреждение:" -msgid "Export successfully." -msgstr "Успешно экспортировано." +msgid "Exported successfully" +msgstr "Успешно экспортировано" msgid "Model file downloaded." msgstr "Файл модели скачан." msgid "Serious warning:" -msgstr "Серьезное предупреждение:" +msgstr "Серьёзное предупреждение:" msgid " (Repair)" -msgstr " (Починить модель)" +msgstr " (Починить)" msgid " Click here to install it." msgstr " Нажмите здесь, чтобы установить." @@ -5818,10 +6599,10 @@ msgstr " Нажмите здесь, чтобы установить." msgid "WARNING:" msgstr "ПРЕДУПРЕЖДЕНИЕ:" -msgid "Your model needs support ! Please make support material enable." -msgstr "Вашей модели необходима поддержка, включите её генерацию!" +msgid "Your model needs support! Please enable support material." +msgstr "Вашей модели нужна поддержка! Пожалуйста, включите поддержку." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Перекрытие пути G-кода" msgid "Support painting" @@ -5870,12 +6651,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Снизу" -msgid "Enable AI monitoring of printing" -msgstr "Контроль процесса печати с помощью ИИ" - -msgid "Sensitivity of pausing is" -msgstr "Чувствительность" - msgid "Enable detection of build plate position" msgstr "Определение положения печатной пластины" @@ -5886,21 +6661,78 @@ msgstr "" "Функция обнаружения метки (QR-кода) печатной пластины. Печать " "приостанавливается, если метка находится не в том месте." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Контроль процесса печати с помощью ИИ" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +# ???протечки, засорения +msgid "Nozzle Clumping Detection" +msgstr "Обнаружение сгустков на сопле" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Проверка первого слоя" msgid "Auto-recovery from step loss" msgstr "Автовосстановление после потери шагов" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Разрешить звуковые уведомления" msgid "Filament Tangle Detect" -msgstr "Обнаружение запутывания прутка" - -# ???протечки, засорения -msgid "Nozzle Clumping Detection" -msgstr "Обнаружение сгустков на сопле" +msgstr "Обнаружение запутывания филамента" msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" @@ -5910,15 +6742,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Тип сопла" -msgid "Stainless Steel" -msgstr "Нержавеющая сталь" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Закалённая сталь" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Нержавеющая сталь" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Общие" @@ -5936,7 +6782,7 @@ msgid "View all object's settings" msgstr "Просмотр всех настроек модели" msgid "Material settings" -msgstr "Параметры материала" +msgstr "Настройки материала" msgid "Remove current plate (if not last one)" msgstr "Удалить текущую печатную пластину (кроме последней)" @@ -5953,33 +6799,61 @@ msgstr "Разблокировать текущую печатную пласт msgid "Lock current plate" msgstr "Заблокировать текущую печатную пластину" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" -msgstr "Изменить имя текущей пластины" +msgstr "Изменить имя текущей печатной пластины" msgid "Move plate to the front" -msgstr "Переместить пластину вперед" +msgstr "Переместить печатную пластину вперед" msgid "Customize current plate" msgstr "Настроить текущую печатную пластину" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" -msgstr " печатной пластины %1%: " +msgstr " печатной пластины %1%:" msgid "Invalid name, the following characters are not allowed:" -msgstr "Недопустимое имя файла. Следующие символов не разрешены:" +msgstr "Недопустимое имя файла, эти символы не разрешены:" msgid "Sliced Info" msgstr "Информация о нарезке" msgid "Used Filament (m)" -msgstr "Использовано прутка (м)" +msgstr "Использовано филамента (м)" msgid "Used Filament (mm³)" -msgstr "Использовано прутка (мм³)" +msgstr "Использовано филамента (мм³)" msgid "Used Filament (g)" -msgstr "Использовано прутка (г)" +msgstr "Использовано филамента (г)" msgid "Used Materials" msgstr "Использовано материалов" @@ -5988,7 +6862,54 @@ msgid "Estimated time" msgstr "Расчётное время печати" msgid "Filament changes" -msgstr "Смена прутка" +msgstr "Смена филамента" + +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" msgid "Click to edit preset" msgstr "Нажмите, чтобы изменить профиль" @@ -5996,23 +6917,29 @@ msgstr "Нажмите, чтобы изменить профиль" msgid "Connection" msgstr "Подключиться" -msgid "Bed type" -msgstr "Тип стола" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Объём очистки" msgid "Add one filament" -msgstr "Добавить пластиковую нить" +msgstr "Добавить один филамент" msgid "Remove last filament" -msgstr "Удалить предыдущую добавленную пластиковую нить" +msgstr "Удалить последний добавленный филамент" msgid "Synchronize filament list from AMS" -msgstr "Синхронизировать список материалов из АСПП" +msgstr "Синхронизировать перечень материалов из AMS" msgid "Set filaments to use" -msgstr "Выбор пластиковой нити" +msgstr "Выбор филамента" msgid "Search plate, object and part." msgstr "Поиск печатной пластины, модели или части модели." @@ -6020,47 +6947,29 @@ msgstr "Поиск печатной пластины, модели или час msgid "Pellets" msgstr "Гранулы" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"АСПП недоступна. Пожалуйста, выберите принтер \n" -"на вкладке «Принтер», чтобы загрузить информацию о АСПП." - -msgid "Sync filaments with AMS" -msgstr "Синхронизация прутка с АСПП" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"При синхронизации пластиковых нитей с АСПП все текущие выбранные профили " -"прутков и цвета будут сброшены. Продолжить?" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Синхронизация уже выполнена. Хотите синхронизировать только изменения или " -"заново синхронизировать всё?" - -msgid "Sync" -msgstr "Только изменения" - -msgid "Resync" -msgstr "Всё" msgid "There are no compatible filaments, and sync is not performed." msgstr "" "Синхронизация не выполнена, ввиду отсутствия совместимых пластиковых нитей." +msgid "Sync filaments with AMS" +msgstr "Синхронизация филамента с AMS" + msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Имеются несколько неизвестных материалов, сопоставленных с общим профилем. " -"Обновите или перезапустите Snapmaker Orca, чтобы проверить наличие обновлений " -"системных профилей." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6068,15 +6977,15 @@ msgstr "Вы хотите сохранить изменения в \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Размонтирование прошло успешно. Теперь устройство %s(%s) может быть " "безопасно извлечено из компьютера." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Не удалось извлечь устройство %s(%s)." +msgid "Ejecting of device %s (%s) has failed." +msgstr "Извлечение устройства %s (%s) не выполнено." msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Обнаружен предыдущий несохранённый проект. Хотите восстановить его?" @@ -6098,9 +7007,9 @@ msgid "" "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"Твердость сопла, установленного по умолчанию, не достаточна для печати " -"данной пластиковой нитью. Замените сопло на закалённое или смените " -"пластиковую нить. В противном случае сопло будет изношено или повреждено." +"Твердость сопла, установленного по умолчанию, недостаточна для печати данной " +"пластиковой нитью. Замените сопло на закалённое или смените филамент. В " +"противном случае сопло будет изношено или повреждено." msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " @@ -6109,86 +7018,120 @@ msgstr "" "Включение обычного режима таймлапса может привести к появлению дефектов " "поверхности, поэтому рекомендуется изменить режим на плавный." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Развернуть боковую панель" msgid "Collapse sidebar" msgstr "Свернуть боковую панель" +msgid "Tab" +msgstr "Вкладка" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Загрузка файла: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -"Этот 3mf создан не в Snapmaker Orca, поэтому загрузятся только данные геометрии." +"Этот 3MF создан не в Snapmaker Orca, поэтому загрузятся только данные геометрии." -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "Загрузка 3mf" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." msgstr "" -"Версия этого формата 3mf (%s) новее текущей версии %s (%s).\n" +"Этот проект был создан с помощью Snapmaker Orca 2.3.1-alpha и использует " +"настройки шаблона поворота заполнения, которые могут некорректно работать с " +"вашим текущим шаблоном заполнения. Это может привести к слабой поддержке или " +"проблемам с качеством печати." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Хотите ли вы, чтобы Snapmaker Orca автоматически исправил это, очистив " +"настройки поворота шаблона?" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "" +"Версия этого формата 3MF (%s) новее текущей версии %s (%s).\n" "Обнаружены следующие нераспознанные ключи:" msgid "You'd better upgrade your software.\n" msgstr "Рекомендуем вам обновить программу.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Версия этого формата 3mf (%s) новее текущей версии %s (%s).\n" +"Версия этого формата 3MF (%s) новее текущей версии %s (%s).\n" "Рекомендуется обновить программу." -msgid "Invalid values found in the 3mf:" -msgstr "В файле 3mf найдены недопустимые значения:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "В файле 3MF найдены недопустимые значения:" msgid "Please correct them in the param tabs" msgstr "Пожалуйста, исправьте их на вкладках параметров" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"В профиле прутка или принтера этого 3mf файла содержится следующий " +"В профиле филамента или принтера этого 3MF файла содержится следующий " "модифицированный G-код:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Пожалуйста, подтвердите, что этот модифицированный G-код безопасен во " "избежание повреждения принтера!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "Модифицированный G-код" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" -"В этом 3mf файле содержаться следующие пользовательские профили прутка или " +"В этом 3MF файле содержатся следующие пользовательские профили филамента или " "принтера:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" -"Во избежание повреждения принтера убедитесь, что G-код в этих профилях " -"безопасен!" +"Пожалуйста, подтвердите, что G-код в этих профилях безопасен, чтобы " +"предотвратить повреждение принтера!" msgid "Customized Preset" msgstr "Пользовательский профиль" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Имена компонентов внутри step файла не в формате UTF8!" msgid "The name may show garbage characters!" -msgstr "В названии могут присутствовать ненужные символы!" +msgstr "В названии могут присутствовать мусорные символы!" msgid "Remember my choice." -msgstr "Запомнить выбор" +msgstr "Запомнить выбор." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." @@ -6232,15 +7175,25 @@ msgstr "" msgid "Object with multiple parts was detected" msgstr "Обнаружена модель, состоящая из нескольких частей" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Файл не содержит никаких геометрических данных." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" -"Похоже, ваша модель слишком большая. \n" -"Хотите автоматически уменьшить её масштаб, \n" +"Похоже, ваша модель слишком большая.\n" +"Хотите автоматически уменьшить её масштаб,\n" "чтобы она уместилась на столе?" msgid "Object too large" @@ -6277,8 +7230,8 @@ msgid "" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"Вы пытаетесь удалить деталь, являющейся частью разрезанной модели. \n" -"Это действие приведёт к удалению информации о разрезе. \n" +"Вы пытаетесь удалить деталь, являющейся частью разрезанной модели.\n" +"Это действие приведёт к удалению информации о разрезе.\n" "После этого согласованность модели не может быть гарантирована." msgid "The selected object couldn't be split." @@ -6302,6 +7255,34 @@ msgstr "Выберите новый файл" msgid "File for the replace wasn't selected" msgstr "Файл для замены не выбран" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Пожалуйста, выберите файл" @@ -6341,18 +7322,31 @@ msgstr "Пожалуйста, устраните ошибки нарезки и msgid "" "Network Plug-in is not detected. Network related features are unavailable." -msgstr "Сетевой плагин не обнаружен. Функции, связанные с сетью, недоступны." +msgstr "Сетевой плагин не обнаружен. Сетевые функции недоступны." msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Режим только предпросмотра:\n" "Загруженный файл содержит только G-код, поэтому переход на страницу " "«Подготовка» невозможен." +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" -msgstr "Изменённые профили можно сохранить в новом проекте или отказаться." +msgstr "" +"Вы можете сохранить измененные настройки профиля в новом проекте или удалить " +"их" msgid "Creating a new project" msgstr "Создание нового проекта" @@ -6375,13 +7369,13 @@ msgstr "Сохранение проекта" msgid "Importing Model" msgstr "Импортирование модели" -msgid "prepare 3mf file..." -msgstr "подготовка 3mf файла..." +msgid "prepare 3MF file..." +msgstr "подготовка 3MF файла..." msgid "Download failed, unknown file format." msgstr "Не удалось загрузить, неизвестный формат файла." -msgid "downloading project ..." +msgid "downloading project..." msgstr "скачивание проекта..." msgid "Download failed, File size exception." @@ -6398,14 +7392,28 @@ msgstr "" "Не удалось импортировать в Snapmaker Orca. Загрузите файл и импортируйте его " "вручную." +msgid "INFO:" +msgstr "Информация:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Не заданы ускорения для калибровки. Использовать значение ускорения по " +"умолчанию " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Не заданы скорости для калибровки. Использовать оптимальную скорость по " +"умолчанию " + msgid "Import SLA archive" msgstr "Импорт SLA архива" msgid "The selected file" msgstr "В выбранном файле" -msgid "does not contain valid gcode." -msgstr "G-кода содержатся недопустимые данные." +msgid "does not contain valid G-code." +msgstr "не содержится правильного G-кода." msgid "Error occurs while loading G-code file" msgstr "Ошибка при загрузке файла G-кода" @@ -6442,10 +7450,10 @@ msgstr "Одновременно можно открыть только один msgid "G-code loading" msgstr "Загрузка G-кода" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Одновременная загрузка файла G-кода и модели невозможна!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "В режиме предпросмотра добавление моделей недоступно!" msgid "All objects will be removed, continue?" @@ -6453,8 +7461,8 @@ msgstr "Все модели будут удалены, продолжить?" msgid "The current project has unsaved changes, save it before continue?" msgstr "" -"В текущем проекте имеются несохранённые изменения. \n" -"Сохранить их перед продолжением?" +"В текущем проекте есть несохраненные изменения. Сохранить их перед " +"продолжением?" msgid "Number of copies:" msgstr "Количество копий:" @@ -6483,20 +7491,28 @@ msgid "" "on the printer." msgstr "Файл %s отправлен в память принтера и может быть просмотрен на нём." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Невозможно выполнить булеву операцию над сетками модели. Будут сохранены " -"только положительные части. Вы можете исправить сетки и попробовать снова." +"Невозможно выполнить булевую операцию над сетками модели. Будут сохранены " +"только положительные части. Попробуйте починить сетку модели и попробовать " +"снова." #, boost-format msgid "Reason: part \"%1%\" is empty." msgstr "Причина: часть \"%1%\" пустая." +# ??? не формирует объем, не имеет замкнутой геометрии #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Причина: часть \"%1%\" не ограничивает объём." +msgstr "Причина: часть \"%1%\" не формирует замкнутый объём." #, boost-format msgid "Reason: part \"%1%\" has self intersection." @@ -6510,26 +7526,18 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Вы уверены, что хотите сохранить исходные SVG файлы с их локальными путями в " -"3MF файле?\n" -"Если нажмете «НЕТ», все SVG файлы в проекте больше не будут доступны для " -"редактирования." - -msgid "Private protection" -msgstr "Частная охрана" +"Невозможно выполнить булевую операцию над сетками модели. Будут " +"экспортированы только положительные части." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" -msgstr "Готов ли 3D-принтер? Печатная пластина на месте, пустая и чистая?" +msgstr "Готов ли Принтер? Печатная пластина на месте, пустая и чистая?" msgid "Upload and Print" msgstr "Загрузить и напечатать" +msgid "Abnormal print file data. Please slice again" +msgstr "Неправильные данные файла печати. Пожалуйста, нарежьте ещё раз" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6550,8 +7558,33 @@ msgstr "Пользовательские поддержки и раскраск msgid "Optimize Rotation" msgstr "Оптимизация вращения" -msgid "Invalid number" -msgstr "Неправильное числовое значение" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Настройки печатной пластины" @@ -6594,26 +7627,48 @@ msgstr "" msgid "Triangles: %1%\n" msgstr "Треугольников: %1%\n" -msgid "Tips:" -msgstr "Подсказки:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" "Функция «Починить модель» в настоящее время доступна только в Windows. " -"Пожалуйста, почините модель с помощью Bambu Studio (Windows) или в другой " -"CAD программе." +"Почините модель в Snapmaker Orca (Windows) или программах САПР." #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"Не рекомендуется использовать печатную пластину %d (%s) для печати " +"филаментов %s (%s). Если вы всё же хотите сделать это, то установите " +"температуру стола для этого филамента на ненулевое значение." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Не рекомендуется использовать печатную пластину% d (%s) для печати прутком " -"%s (%s). Если вы всё же хотите сделать это, то установите температуру стола " -"для этого прутка на ненулевое значение." msgid "Switching the language requires application restart.\n" msgstr "Для смены языка требуется перезапуск приложения.\n" @@ -6630,39 +7685,6 @@ msgstr "Смена языка приложения при изменении н msgid "Changing application language" msgstr "Изменение языка приложения" -msgid "Changing the region will log out your account.\n" -msgstr "Смена региона приведёт к выходу из вашей учётной записи.\n" - -msgid "Region selection" -msgstr "Выделение области" - -msgid "Second" -msgstr "секунд" - -msgid "Browse" -msgstr "Обзор" - -msgid "Choose Download Directory" -msgstr "Выбор папки загрузки" - -msgid "Associate" -msgstr "Ассоциация" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "Текущая ассоциация: " - -msgid "Current Instance" -msgstr "Текущая копия" - -msgid "Current Instance Path: " -msgstr "Путь к текущей копии: " - -msgid "General Settings" -msgstr "Общие настройки" - msgid "Asia-Pacific" msgstr "Азиатско-Тихоокеанский" @@ -6678,25 +7700,56 @@ msgstr "Северная Америка" msgid "Others" msgstr "Прочее" -msgid "Login Region" -msgstr "Регион входа" +msgid "Changing the region will log out your account.\n" +msgstr "Смена региона приведёт к выходу из вашей учётной записи.\n" -msgid "Stealth Mode" -msgstr "Режим конфиденциальности (отключение телеметрии Bambulab)" +msgid "Region selection" +msgstr "Выделение области" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Время резервного копирования в секундах." + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Это остановит передачу данных в облачные сервисы Bambu. Пользователи, " -"которые не используют принтеры BBL или используют режим «Только LAN», могут " -"безопасно включить эту функцию." -msgid "Enable network plugin" -msgstr "Включить сетевой плагин" +msgid "Browse" +msgstr "Обзор" -msgid "Check for stable updates only" -msgstr "Уведомлять только о стабильных версиях программы" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Выбор папки загрузки" + +msgid "Associate" +msgstr "Ассоциация" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "с Snapmaker Orca, чтобы она могла открывать модели сразу с" + +msgid "Current Association: " +msgstr "Текущая ассоциация: " + +msgid "Current Instance" +msgstr "Текущая копия" + +msgid "Current Instance Path: " +msgstr "Путь к текущей копии: " + +msgid "General" +msgstr "Общие" msgid "Metric" msgstr "Метрическая СИ" @@ -6705,9 +7758,19 @@ msgid "Imperial" msgstr "Имперская СИ" msgid "Units" +msgstr "Единицы измерения" + +msgid "Home" +msgstr "Главная" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "Задание страницы, открываемой при запуске приложения." + +msgid "Enable dark mode" msgstr "" -"Единицы \n" -"измерения" msgid "Allow only one Snapmaker Orca instance" msgstr "Запускать только один экземпляр программы" @@ -6730,24 +7793,122 @@ msgstr "" "Если включено, разрешена работа только одного экземпляра той же самой версии " "программы." -msgid "Home" -msgstr "Home" +msgid "Show splash screen" +msgstr "Показывать заставку при запуске программы" -msgid "Default Page" +msgid "Show the splash screen during startup." +msgstr "Показывать окно приветствия при запуске приложения." + +msgid "Downloads folder" msgstr "" -"Страница \n" -"по умолчанию" -msgid "Set the page opened on startup." -msgstr "Задание страницы, открываемой при запуске приложения." +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Загружать всё" + +msgid "Ask When Relevant" +msgstr "Спрашивать, когда уместно" + +msgid "Always Ask" +msgstr "Спрашивать всегда" + +msgid "Load Geometry Only" +msgstr "Загружать только геометрию" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"Следует ли при открытии 3MF проекта загружать настройки принтера, филамента " +"и процесса?" + +msgid "Maximum recent files" +msgstr "Максимальное количество последних файлов" + +msgid "Maximum count of recent files" +msgstr "Максимальное количество последних файлов" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Если включено, во время импорта STEP файла появится диалоговое окно настроек " +"параметров импорта." + +msgid "Auto backup" +msgstr "" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Периодическое создание резервной копии проекта для восстановления после " +"непредвиденного сбоя программы." + +msgid "Preset" +msgstr "Профиль" + +msgid "Remember printer configuration" +msgstr "Запоминать конфигурацию принтера" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Если эта функция включена, Snapmaker Orca будет автоматически запоминать и " +"переключать конфигурацию филамента/процесса для каждого принтера." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Если включено, вы сможете управлять несколькими устройствами и отправлять " +"задания на печать на несколько устройств одновременно." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +# в Сохранение толщины вертикальной оболочки. +# было Везде, но из-за условия совместимости изменено.... как тогда быть? +msgid "All" +msgstr "Все" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Авторасстановка моделей при клонировании" msgid "Touchpad" msgstr "Тачпад" msgid "Camera style" -msgstr "" -"Стиль управ-\n" -"ления камерой" +msgstr "Стиль управления камерой" msgid "" "Select camera navigation style.\n" @@ -6760,6 +7921,15 @@ msgstr "" "Сенсорная панель: Alt + перемещение для вращения, Shift + перемещение для " "перемещения камеры." +msgid "Orbit speed multiplier" +msgstr "Множитель скорости движения по орбите" + +# ??? Умножает скорость движения по орбите для более тонкого или грубого перемещения камеры. +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" +"Множитель скорости движения камеры по орбите для более тонкого или грубого " +"её перемещения." + msgid "Zoom to mouse position" msgstr "Приближать к положению курсора" @@ -6778,6 +7948,16 @@ msgstr "" "Если включено, используется свободное вращение камеры. Если выключено, " "используется вращение камера с ограничениями." +# Поменять местами кнопки перемещение и поворота камеры +msgid "Swap pan and rotate mouse buttons" +msgstr "Поменять местами кнопки мыши для перемещение и вращение камеры" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Если включено, меняет местами функции перемещения и вращения камеры для " +"левой и правой кнопок мыши." + msgid "Reverse mouse zoom" msgstr "Инвертировать управление масштабом" @@ -6786,156 +7966,159 @@ msgstr "" "Если включено, направление масштабирования с помощью колесика мыши будет " "инвертировано." -msgid "Show splash screen" -msgstr "Показывать заставку при запуске программы" - -msgid "Show the splash screen during startup." -msgstr "Показывать окно приветствия при запуске приложения." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Показывать уведомление с полезным советом при запуске приложения" - -msgid "If enabled, useful hints are displayed at startup." +msgid "Clear my choice on..." msgstr "" -"Если включено, будут показываться уведомления с полезном советом при запуске " -"приложения." -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Объём очистки: автопересчёт при каждом изменении цвета" - -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Unsaved projects" +msgstr "" + +# ??? Сбросить мой выбор действия для проектов, Сбросить запрос о несохранённых изменениях для проекта при закрытии программы +msgid "Clear my choice on the unsaved projects." +msgstr "Отменить выбор для несохраненных проектов." + +msgid "Unsaved presets" +msgstr "" + +# ??? Сбросить мой выбор действия для профилей, Сбросить запрос о несохранённых изменениях для профиля при закрытии программы, Сбросить выбор, который я сделал при запросе о несохранённых изменениях в профиле. +msgid "Clear my choice on the unsaved presets." +msgstr "Очистить мой выбор для несохраненных профилей." + +msgid "Synchronizing printer preset" msgstr "" -"Если включено, выполняется автоматический перерасчёт объёма очистки при " -"каждом изменении цвета." msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Объём очистки: автопересчёт при каждой смене прутка" - -msgid "If enabled, auto-calculate every time when filament is changed" +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Если включено, выполняется автоматический перерасчёт объёма очистки при " -"каждой смене прутка." -msgid "Remember printer configuration" -msgstr "Запоминать конфигурацию принтера" +msgid "Login region" +msgstr "" + +msgid "Stealth mode" +msgstr "" msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." msgstr "" -"Если включено, программа автоматически запоминает и переключает конфигурацию " -"материала/процесса печати для каждого принтера." +"Это остановит передачу данных в облачные сервисы Bambu. Пользователи, " +"которые не используют принтеры BBL или используют режим «Только LAN», могут " +"безопасно включить эту функцию." -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "Управление несколькими принтерами (требуется перезапуск программы)" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." +msgid "Network test" msgstr "" -"Если включено, вы сможете управлять несколькими устройствами и отправлять " -"задания на печать на несколько устройств одновременно." -msgid "Network" -msgstr "Сеть" +msgid "Test" +msgstr "Тест" -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "Автосинхронизация пользовательских профилей (принтера/прутка/процесса)" +msgid "Update & sync" +msgstr "" -msgid "User Sync" -msgstr "Синхронизация пользовательских данных." +msgid "Check for stable updates only" +msgstr "Уведомлять только о стабильных версиях программы" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Автосинхронизация пользовательских профилей (принтера/филамента/процесса)" msgid "Update built-in Presets automatically." -msgstr "Обновлять встроенные профили автоматически" +msgstr "Автоматически обновлять системные профили." -msgid "System Sync" -msgstr "Синхронизация системных данных." +msgid "Network plugin" +msgstr "" -msgid "Clear my choice on the unsaved presets." -msgstr "Очистить мой выбор от несохранённых профилей." +msgid "Enable network plugin" +msgstr "Включить сетевой плагин" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" +"Отключите, чтобы использовать последний сетевой плагин, поддерживающий новые " +"прошивки BambuLab." msgid "Associate files to Snapmaker Orca" msgstr "Сопоставление типов файлов с Snapmaker Orca" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Ассоциировать файлы .3mf с Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" -"Если включено, назначает Snapmaker Orca в качестве приложения по умолчанию для " -"открытия .3mf файлов." +"Если включено, Snapmaker Orca назначается приложением по умолчанию для открытия " +"файлов .3mf" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Ассоциировать файлы .stl с Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" -"Если включено, назначает Snapmaker Orca в качестве приложения по умолчанию для " -"открытия .stl файлов." +"Если включено, Snapmaker Orca назначается приложением по умолчанию для открытия " +"файлов .stl" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Ассоциировать файлы .step/.stp с Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" -"Если включено, назначает Snapmaker Orca в качестве приложения по умолчанию для " -"открытия .step файлов." +"Если включено, Snapmaker Orca назначается приложением по умолчанию для открытия " +"файлов .step" msgid "Associate web links to Snapmaker Orca" -msgstr "Сопоставление веб-ссылок с Snapmaker Orca" +msgstr "Ассоциировать веб-ссылки с Snapmaker Orca" -msgid "Associate URLs to Snapmaker Orca" -msgstr "Ассоциировать URL-адреса с Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Максимальное количество недавних проектов" - -msgid "Maximum count of recent projects" +msgid "Developer" msgstr "" -"Максимальное количество проектов, отображаемое в списке недавних проектов." - -msgid "Clear my choice on the unsaved projects." -msgstr "Очистить мой выбор от несохранённых проектов." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Отключить предупреждения при загрузке 3MF с модифицированным G-кодом" - -msgid "Auto-Backup" -msgstr "Автосоздание резервной копии" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "" -"Периодическое создание резервной копии проекта для восстановления после " -"непредвиденного сбоя программы." - -msgid "every" -msgstr "каждые" - -msgid "The peroid of backup in seconds." -msgstr "Время резервного копирования в секундах." - -msgid "Downloads" -msgstr "Загрузки" - -msgid "Dark Mode" -msgstr "Тёмная тема" - -msgid "Enable Dark mode" -msgstr "Включить тёмную тему" msgid "Develop mode" msgstr "Режим разработчика" msgid "Skip AMS blacklist check" -msgstr "Пропуск проверки материалов в АСПП из файла чёрного списка" +msgstr "Пропуск проверки материалов в AMS из файла чёрного списка" -msgid "Home page and daily tips" -msgstr "Домашняя страница и ежедневные советы" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Показывать домашнюю страницу при запуске" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Уровень ведения журнала" + +msgid "fatal" +msgstr "критическая ошибка" + +msgid "error" +msgstr "ошибка" + +msgid "warning" +msgstr "предупреждение" + +msgid "debug" +msgstr "отладка" + +msgid "trace" +msgstr "трассировка" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Настройки синхронизации" @@ -6976,24 +8159,6 @@ msgstr "Включить SSL(FTP)" msgid "Internal developer mode" msgstr "Режим внутреннего разработчика" -msgid "Log Level" -msgstr "Уровень ведения журнала" - -msgid "fatal" -msgstr "критическая ошибка" - -msgid "error" -msgstr "ошибка" - -msgid "warning" -msgstr "предупреждение" - -msgid "debug" -msgstr "отладка" - -msgid "trace" -msgstr "трассировка" - msgid "Host Setting" msgstr "Настройка хоста" @@ -7013,12 +8178,12 @@ msgid "debug save button" msgstr "кнопка сохранения отладки" msgid "save debug settings" -msgstr "Сохранить настройки отладки" +msgstr "сохранить настройки отладки" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "Настройки отладки успешно сохранены!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Смена облачной среды, пройдите повторную аутентификацию!" msgid "System presets" @@ -7030,14 +8195,20 @@ msgstr "Пользовательские профили" msgid "Incompatible presets" msgstr "Несовместимые профили" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" -msgstr "Прутки АСПП" +msgstr "Филаменты AMS" -msgid "Click to pick filament color" -msgstr "Нажмите, чтобы выбрать цвет нити" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Пожалуйста, выберите цвет прутка" +msgid "Click to select filament color" +msgstr "Нажмите, чтобы выбрать цвет филамента" msgid "Add/Remove presets" msgstr "Добавить/удалить профиль" @@ -7046,33 +8217,47 @@ msgid "Edit preset" msgstr "Изменить профиль" msgid "Project-inside presets" -msgstr "Внутрипроектные профили" +msgstr "Профили внутри проекта" + +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" msgid "Add/Remove filaments" -msgstr "Добавить/удалить пруток" +msgstr "Добавить/удалить филаменты" msgid "Add/Remove materials" msgstr "Добавить/удалить материал" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Выбор/удаление принтеров (системные профили)" msgid "Create printer" msgstr "Создать принтер" +msgid "Empty" +msgstr "Пусто" + +msgid "Incompatible" +msgstr "Несовместимы" + msgid "The selected preset is null!" msgstr "Выбранный профиль пуст!" -# ?????? В двух местах - в одном месте кнопка в другом Конечный слой +# ?????? В двух местах - в одном месте кнопка в другом Конечный слой. В V2.2.0beta2 пока не исправлено msgid "End" -msgstr "End" +msgstr "Конец" msgid "Customize" msgstr "Настройка" -# ??? layer? msgid "Other layer filament sequence" -msgstr "Последовательность прутков на других слоях" +msgstr "Другая последовательность слоев филамента" msgid "Please input layer value (>= 2)." msgstr "Пожалуйста, введите значение слоя (>= 2)." @@ -7080,6 +8265,12 @@ msgstr "Пожалуйста, введите значение слоя (>= 2)." msgid "Plate name" msgstr "Имя печатной пластины" +msgid "Same as Global Plate Type" +msgstr "Аналогично глобальному типу пластины" + +msgid "Bed type" +msgstr "Тип стола" + msgid "Same as Global Print Sequence" msgstr "Аналогично глобальной последовательности печати" @@ -7096,10 +8287,7 @@ msgid "Spiral vase" msgstr "Спиральная ваза" msgid "First layer filament sequence" -msgstr "Последовательность прутков на первом слое" - -msgid "Same as Global Plate Type" -msgstr "Аналогично глобальному типу пластины" +msgstr "Последовательность филамента первого слоя" msgid "Same as Global Bed Type" msgstr "Аналогично глобальному типу стола" @@ -7118,19 +8306,19 @@ msgstr "Выход" msgid "Slice all plate to obtain time and filament estimation" msgstr "" -"Нарезка всех столов для получения примерного времени печати и расчёта " -"необходимого количества материала." +"Нарезка всех столов для расчтеа примерного времени печати и необходимого " +"количества филамента" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "Упаковка данных проекта в файл формата 3mf" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Отправка 3mf" msgid "Jump to model publish web page" msgstr "Перейти на веб-страницу публикации модели" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Примечание: подготовка может занять несколько минут. Пожалуйста, наберитесь " "терпения." @@ -7138,13 +8326,13 @@ msgstr "" msgid "Publish" msgstr "Опубликовать" -msgid "Publish was cancelled" -msgstr "Публикация была отменена" +msgid "Publish was canceled" +msgstr "Опубликование отменено" msgid "Slicing Plate 1" msgstr "Нарезка стола 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Упаковка данных в 3mf" msgid "Jump to webpage" @@ -7158,25 +8346,26 @@ msgid "User Preset" msgstr "Пользовательский профиль" msgid "Preset Inside Project" -msgstr "Внутрипроектный профиль" +msgstr "Профиль внутри проекта" msgid "Name is unavailable." msgstr "Имя недоступно." -msgid "Overwrite a system profile is not allowed" -msgstr "Перезапись системного профиля запрещена" +msgid "Overwriting a system profile is not allowed." +msgstr "Перезапись системного профиля запрещена." #, boost-format msgid "Preset \"%1%\" already exists." msgstr "Профиль \"%1%\" уже существует." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "Профиль \"%1%\" уже существует и несовместим с текущим принтером." -msgid "Please note that saving action will replace this preset" +msgid "Please note that saving will overwrite this preset." msgstr "" -"Обратите внимание, что при сохранении произойдёт замена текущего профиля." +"Обратите внимание, что при сохранении произойдёт перезапись текущего профиля." msgid "The name cannot be the same as a preset alias name." msgstr "Имя не должно совпадать с именем предустановленного профиля." @@ -7202,7 +8391,7 @@ msgstr "Для \"%1%\" сменить \"%2%\" на \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "Для \"%1%\" добавить \"%2%\" как новый шаблон" +msgstr "Для \"%1%\" добавить \"%2%\" как новый профиль" #, boost-format msgid "Simply switch to \"%1%\"" @@ -7211,35 +8400,8 @@ msgstr "Просто переключиться на \"%1%\"" msgid "Task canceled" msgstr "Задание отменено" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Поиск" - -msgid "My Device" -msgstr "Мой принтер" - -msgid "Other Device" -msgstr "Другое устройство" - -msgid "Online" -msgstr "В сети" - -msgid "Input access code" -msgstr "Введите код доступа" - -msgid "Can't find my devices?" -msgstr "Не удаётся найти свои принтеры?" - -msgid "Log out successful." -msgstr "Выход выполнен успешно." - -msgid "Busy" -msgstr "Занят" - msgid "Bambu Cool Plate" -msgstr "Не нагреваемая пластина Bambu" +msgstr "Ненагреваемая пластика Bambu" msgid "PLA Plate" msgstr "PLA пластина" @@ -7256,16 +8418,53 @@ msgstr "Высокотемпературная пластина" msgid "Bambu Textured PEI Plate" msgstr "Текстурированная PEI пластина Bambu" -msgid "Send print job to" -msgstr "Отправка задания на печать" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "" -"Калибровка\n" -"динамики потока" +msgstr "Калибровка динамики потока" -msgid "Click here if you can't connect to the printer" -msgstr "Не удаётся подключиться к принтеру?" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "отправка завершена" @@ -7273,112 +8472,37 @@ msgstr "отправка завершена" msgid "Error code" msgstr "Код ошибки" -msgid "No login account, only printers in LAN mode are displayed" +msgid "High Flow" msgstr "" -"Без входа в учётную запись, отображаются только \n" -"принтеры в локальной сети." - -msgid "Connecting to server" -msgstr "Подключение к серверу" - -msgid "Synchronizing device information" -msgstr "Синхронизация информации об устройстве" - -msgid "Synchronizing device information time out" -msgstr "Время синхронизации информации об устройстве истекло" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "" -"Невозможно отправить задание на печать, при обновлении прошивки принтера." - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"Принтер выполняет инструкции. Пожалуйста, перезапустите печать после их " -"завершения." - -msgid "The printer is busy on other print job" -msgstr "Принтер занят другим заданием" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Количество пластиковых нитей - %s, что превышает количество слотов АСПП. " -"Обновите прошивку принтера, чтобы получить поддержку функции назначения " -"слотов АСПП." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Количество пластиковых нитей превышает количество слотов АСПП. Обновите " -"прошивку принтера, чтобы получить поддержку функции назначения слотов АСПП." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Соответствия между материалами и слотами АСПП были установлены. Вы можете " -"нажать на пластиковую нить выше, чтобы вручную задать для неё нужный слот " -"АСПП." - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Перед отправкой задания на печать, нажмите на каждую пластиковую нить, чтобы " -"вручную задать для неё нужный слот АСПП." #, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" -"Материал %s не соответствует материалу в слоте %s АСПП. Обновите прошивку " -"принтера, чтобы получить поддержку функции назначения слотов АСПП." +"Филамент %s не соответствует филаменту в слоте AMS %s. Обновите прошивку " +"принтера для возможности назначения слота AMS." msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" -"Материал не соответствует материалу в слоте АСПП. Обновите прошивку " -"принтера, чтобы получить поддержку функции назначения слотов АСПП." - -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Текущая прошивка принтера поддерживает только последовательное сопоставление " -"пластиковых нитей => слот АСПП." - -msgid "An SD card needs to be inserted before printing." -msgstr "Перед печатью необходимо вставить SD-карту." +"Материал не соответствует материалу в слоте AMS. Обновите прошивку принтера, " +"чтобы получить поддержку функции назначения слотов AMS." #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"Выбранный принтер (%s) несовместим с профилем принтера (%s), выбранным в " -"слайсере." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Для записи таймлапсов необходимо вставить SD-карту." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Невозможно отправить задание печати на принтер, прошивка которого нуждается " -"в обновлении." - -msgid "Cannot send the print job for empty plate" -msgstr "Невозможно отправить задание на печать, так как стол пуст." - -msgid "This printer does not support printing all plates" -msgstr "Данный принтер не поддерживает печать на всех типах печатных пластин." msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7388,19 +8512,25 @@ msgstr "" "писать таймлапс." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Таймлапс не поддерживается, поскольку для последовательности печати " -"установлено значение «Печать по очереди»." msgid "Errors" msgstr "Ошибок" -msgid "Please check the following:" -msgstr "Пожалуйста, проверьте следующую информацию:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7412,68 +8542,227 @@ msgid "" "they are the required filaments. If they are okay, press \"Confirm\" to " "start printing." msgstr "" -"В АСПП установлены неизвестные пластиковые нити. Убедитесь, что стоят именно " +"В AMS установлены неизвестные филаменты. Убедитесь, что установлены именно " "те, что вам нужны. Если всё в порядке, нажмите «Подтвердить», чтобы начать " "печать." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "сопло в профиле: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "сопло сохранённое: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Диаметр сопла в нарезанном файле не соответствует сохранённому. Если вы " -"недавно меняли сопло, перейдите на вкладку Принтер > Части принтера, чтобы " -"изменить настройки." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Печать высокотемпературным материалом (%s) с %s может привести к повреждению " -"сопла" +msgid "Please check the following:" +msgstr "Пожалуйста, проверьте следующую информацию:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" -"Пожалуйста, устраните вышеуказанную ошибку, иначе печать не может " -"продолжиться." +"Пожалуйста, исправьте вышеуказанную ошибку, в противном случае печать не " +"будет продолжена." msgid "" "Please click the confirm button if you still want to proceed with printing." msgstr "Нажмите кнопку подтверждения, если всё ещё хотите продолжить печать." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Подключение к принтеру. Невозможно отменить во время процесса подключения." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Внимание! Калибровка потока на текстурированной пластине с PEI покрытием " -"может быть неудачной из-за шероховатой поверхности." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Автокалибровка потока с помощью микролидара" +msgid "Preparing print job" +msgstr "Подготовка задания на печать" -msgid "Modifying the device name" -msgstr "Изменение имени принтера" +msgid "The name length exceeds the limit." +msgstr "Слишком длинное имя." -# не длинно? -msgid "Bind with Pin Code" -msgstr "Привязать с помощью пин-кода" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Отправить на SD-карту принтера" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Нажмите здесь, если вы не можете подключиться к принтеру" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Нет учетной записи для входа, отображаются только принтеры в режиме " +"локальной сети" + +msgid "Connecting to server..." +msgstr "Подключение к серверу" + +msgid "Synchronizing device information..." +msgstr "Синхронизация информации об устройстве" + +msgid "Synchronizing device information timed out." +msgstr "Время синхронизации информации об устройстве истекло" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Невозможно отправить задание на печать, пока принтер обновляет прошивку" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Принтер выполняет команды. После их выполнения перезапустите процесс печати" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Невозможно отправить задание печати на принтер, прошивка которого нуждается " +"в обновлении." + +msgid "Cannot send a print job for an empty plate." +msgstr "" +"Невозможно отправить задание на печать, так как печатная пластина пуста" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Принтер не поддерживает печать на всех типах печатных пластин" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Во время обновления невозможно отправить задание на печать" @@ -7481,14 +8770,14 @@ msgstr "Во время обновления невозможно отправи msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Выбранный принтер несовместим с выбранными профилями принтера." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Перед отправкой на SD-карту, сначала вставьте её в принтер." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Принтер должен находиться в одной локальной сети с Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "Принтер не поддерживает отправку на SD-карту." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Нарезка завершена." @@ -7540,7 +8829,7 @@ msgid "Binding..." msgstr "Привязка..." msgid "Please confirm on the printer screen" -msgstr "Пожалуйста, подтвердите привязку на экране принтера." +msgstr "Пожалуйста, подтвердите на экране принтера" msgid "Log in failed. Please check the Pin Code." msgstr "Не удалось выполнить вход в систему. Пожалуйста, проверьте пин-код." @@ -7548,7 +8837,7 @@ msgstr "Не удалось выполнить вход в систему. По msgid "Log in printer" msgstr "Войти в принтер" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Войти в этот принтер с текущей учётной записью?" msgid "Check the reason" @@ -7561,18 +8850,18 @@ msgid "Terms and Conditions" msgstr "Условия использования" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" -"Перед использованием устройства Bambu Lab ознакомьтесь с правилами и " -"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu Lab" -"\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия " -"использования (далее - \"Условия\"). Если вы не соблюдаете или не согласны с " -"Политикой конфиденциальности Bambu Lab, пожалуйста, не пользуйтесь " -"оборудованием и услугами Bambu Lab." +"Благодарим вас за покупку устройства Bambu Lab. Перед использованием " +"устройства Bambu Lab ознакомьтесь с правилами и условиями. Нажимая на кнопку " +"«Согласие на использование устройства Bambu Lab», вы соглашаетесь соблюдать " +"Политику конфиденциальности и Условия использования (далее - «Условия»). " +"Если вы не соблюдаете или не согласны с Политикой конфиденциальности Bambu " +"Lab, пожалуйста, не пользуйтесь оборудованием и услугами Bambu Lab." msgid "and" msgstr "и" @@ -7594,24 +8883,24 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"В сообществе 3D-печатников мы учимся на успехах и неудачах друг друга, чтобы " -"корректировать свои собственные параметры и настройки нарезки. Система %s " -"работает по тому же принципу и использует машинное обучение для улучшения " -"своей работы на основе успехов и неудач огромного количества отпечатков " -"наших пользователей. Мы обучаем %s быть умнее, предоставляя ему данные из " -"реального мира. По вашему желанию эта служба получит доступ к информации из " -"журналу ошибок и журналу использования, которая может включать информацию, " -"описанную в Политике конфиденциальности. Мы не будем собирать никаких " -"персональных данных, по которым можно прямо или косвенно идентифицировать " -"физическое лицо, включая, помимо прочего, имена, адреса, платежную " -"информацию или номера телефонов. Включая данную услугу, вы соглашаетесь с " -"данными условиями и заявлением о Политике конфиденциальности." +"В сообществе 3D-печати мы учимся на успехах и неудачах друг друга, " +"корректируя собственные параметры и настройки слайсинга. %s следует тому же " +"принципу и использует машинное обучение для повышения производительности, " +"анализируя успехи и неудачи огромного количества отпечатков наших " +"пользователей. Мы обучаем %s быть умнее, предоставляя ему реальные данные. " +"При вашем согласии этот сервис получит доступ к информации из ваших журналов " +"ошибок и журналов использования, которая может включать информацию, " +"описанную в Политике конфиденциальности. Мы не собираем никаких персональных " +"данных, по которым можно прямо или косвенно идентифицировать человека, " +"включая, помимо прочего, имена, адреса, платежную информацию или номера " +"телефонов. Включая этот сервис, вы соглашаетесь с настоящими условиями и " +"заявлением о Политике конфиденциальности." msgid "Statement on User Experience Improvement Plan" msgstr "Заявление о плане улучшения взаимодействия с пользователем" @@ -7647,19 +8936,35 @@ msgid "Search in preset" msgstr "Поиск в профиле" msgid "Click to reset all settings to the last saved preset." -msgstr "" -"Нажмите, чтобы сбросить все настройки до последнего сохраненного профиля." +msgstr "Нажмите, чтобы сбросить все настройки последнего сохраненного профиля." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Для плавного таймлапса требуется черновая башня. На модели без использования " -"черновой башни могут быть дефекты. Вы уверены, что хотите отключить черновую " -"башню?" +"черновой башни могут возникнуть дефекты. Вы уверены, что хотите отключить " +"черновую башню?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Включение точной высоты Z и основной башни может привести к увеличению " +"размера основной башни. Вы всё ещё хотите включить?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "Для плавного таймлапса требуется черновая башня. На модели без использования " @@ -7669,47 +8974,37 @@ msgid "Still print by object?" msgstr "Продолжить печать по очереди?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Мы добавили экспериментальный стиль «Стройный (древ. поддержка)», который " -"отличается меньшим объёмом поддержки, а следовательно, и меньшей прочностью. " -"Мы рекомендуем использовать его со следующими параметрами: количество " -"связующих слоёв - 0, зазор поддержки сверху - 0, периметров - 2." msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"При использовании материала поддержки для интерфейса поддержки мы " +"рекомендуем следующие настройки:\n" +"0 верхнее расстояние по оси Z, 0 межинтерфейсный интервал, чересстрочный " +"прямолинейный узор и отключение независимой высоты слоя поддержки." + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Изменить эти настройки автоматически? \n" +"Изменить эти настройки автоматически?\n" "Да - Изменить эти настройки автоматически\n" "Нет - Не изменять эти настройки" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Для стилей «Крепкий (древ. поддержка)» и «Гибридный (древ. поддержка)» \n" -"мы рекомендуем следующие параметры: \n" -"не менее 2-х связующих слоёв, \n" -"зазор поддержки сверху не менее 0,1 мм \n" -"или использование «материалов для поддержек» в качестве связующего слоя." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"При использовании «материалов для поддержек» в качестве связующего \n" -"слоя поддержки, мы рекомендуем следующие параметры:\n" -"зазор поддержки сверху - 0, \n" -"расстояние между связующими линиями - 0, \n" -"шаблон связующего слоя - концентрический, \n" -"отключение независимой высоты слоя поддержки." msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7723,6 +9018,20 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Вы уверены, что хотите включить эту опцию?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Узоры заполнения обычно разработаны так, чтобы автоматически обрабатывать " +"поворот для обеспечения правильной печати и достижения желаемого эффекта " +"(например, «гироид», «куб»). Поворот текущего узора заполнения может " +"привести к недостаточной поддержке. Будьте осторожны и тщательно проверьте " +"наличие возможных проблем с печатью. Вы уверены, что хотите включить эту " +"опцию?" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7732,13 +9041,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Высота слоя не может превышать ограничения установленные в настройках " "принтера -> Экструдер -> Ограничение высоты слоя. Это может вызвать проблемы " "с качеством печати." -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "Автоматически подстроиться под заданный в настройках диапазон?\n" msgid "Adjust" @@ -7749,26 +9058,26 @@ msgstr "Игнорировать" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" -"Экспериментальная функция. Втягивание и обрезка пластиковой нити на большем " -"расстоянии во время её замены для минимизации очистки. Хотя это значительно " -"сокращает величину очистки, это может повысить риск засорения сопла или " -"вызвать другие проблемы при печати." +"Экспериментальная функция. Ретракт и обрезка филамента на большем расстоянии " +"во время её замены для минимизации очистки. Хотя это значительно сокращает " +"величину очистки, это может повысить риск засорения сопла или вызвать другие " +"проблемы при печати." msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" -"Экспериментальная функция. Втягивание и обрезка пластиковой нити на большем " -"расстоянии во время её замены для минимизации очистки. Хотя это значительно " -"сокращает величину очистки, это может повысить риск засорения сопла или " -"вызвать другие проблемы при печати. Пожалуйста, используйте для принтера " -"последнюю версию прошивки." +"Экспериментальная функция. Ретракт и обрезка филамента на большем расстоянии " +"во время её замены для минимизации очистки. Хотя это значительно сокращает " +"величину очистки, это может повысить риск засорения сопла или вызвать другие " +"проблемы при печати. Пожалуйста, используйте для принтера последнюю версию " +"прошивки." msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7777,10 +9086,86 @@ msgid "" "\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " -"башня таймлапса». \n" +"башня таймлапса».\n" "Щёлкните правой кнопкой мыши на пустом месте стола и выберите «Добавить " "примитив» -> «Черновая башня таймлапса»." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Будет создана копия текущего системного профиля, который будет отсоединён от " +"системного профиля." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Текущий пользовательский профиль будет отвязан от родительского системного " +"профиля." + +msgid "Modifications to the current profile will be saved." +msgstr "Изменения будут сохранены в текущем профиле." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "Это действие необратимо. Продолжить?" + +msgid "Detach preset" +msgstr "Отвязать профиль" + +msgid "This is a default preset." +msgstr "Это профиль по умолчанию." + +msgid "This is a system preset." +msgstr "Это системный профиль." + +msgid "Current preset is inherited from the default preset." +msgstr "Текущий профиль наследуется от профиля по умолчанию." + +msgid "Current preset is inherited from" +msgstr "Текущий профиль наследуется от" + +msgid "It can't be deleted or modified." +msgstr "Его нельзя удалить или изменить." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Любые изменения должны быть сохранены как новый профиль, унаследованный от " +"текущего." + +msgid "To do that please specify a new name for the preset." +msgstr "Для этого укажите новое имя для профиля." + +msgid "Additional information:" +msgstr "Дополнительная информация:" + +# Поставщик????? +msgid "vendor" +msgstr "производитель" + +msgid "printer model" +msgstr "модель принтера" + +msgid "default print profile" +msgstr "профиль печати по умолчанию" + +msgid "default filament profile" +msgstr "профиль филамента по умолчанию" + +msgid "default SLA material profile" +msgstr "профиль SLA материала по умолчанию" + +msgid "default SLA print profile" +msgstr "профиль SLA печати по умолчанию" + +msgid "full profile name" +msgstr "полное имя профиля" + +msgid "symbolic profile name" +msgstr "символическое имя профиля" + msgid "Line width" msgstr "Ширина экструзии" @@ -7791,10 +9176,10 @@ msgid "Precision" msgstr "Точность" msgid "Wall generator" -msgstr "Генератор периметров" +msgstr "Генератор стенок" msgid "Walls and surfaces" -msgstr "Периметры и поверхности" +msgstr "Стенки и поверхности" msgid "Bridging" msgstr "Мосты" @@ -7803,7 +9188,7 @@ msgid "Overhangs" msgstr "Нависания" msgid "Walls" -msgstr "Периметры" +msgstr "Стенки" msgid "Top/bottom shells" msgstr "Горизонтальные оболочки сверху/снизу" @@ -7822,17 +9207,15 @@ msgid "" "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"Скорость печати нависаний разной степени свеса. Размер этого свеса " -"выражается в процентах от ширины линии. Скорость 0 означает, что для данного " -"диапазона нависаний замедление отсутствует и используется скорость " -"периметра. Скорость для промежуточных значений рассчитывается с помощью " -"линейной интерполяции." +"Это скорость для различных степеней нависания. Степень нависания выражается " +"в процентах от ширины линии. Скорость 0 означает отсутствие замедления для " +"диапазона степеней нависания" msgid "Bridge" msgstr "Мосты" msgid "Set speed for external and internal bridges" -msgstr "Скорость печати внешних и внутренних мостов." +msgstr "Скорость печати внешних и внутренних мостов" msgid "Travel speed" msgstr "Скорость перемещения" @@ -7847,17 +9230,30 @@ msgid "Raft" msgstr "Подложка" msgid "Support filament" -msgstr "Пруток для поддержки" +msgstr "Филамент для поддержки" + +msgid "Support ironing" +msgstr "Разглаживание поддержки" msgid "Tree supports" msgstr "Древовидная поддержка" -msgid "Skirt" -msgstr "Юбка" +# ММ печать +msgid "Multimaterial" +msgstr "Экструдер ММ" msgid "Prime tower" msgstr "Черновая башня" +msgid "Filament for Features" +msgstr "Филамент для элементов" + +msgid "Ooze prevention" +msgstr "Предотвращение течи материала" + +msgid "Skirt" +msgstr "Юбка" + msgid "Special mode" msgstr "Специальные режимы" @@ -7884,15 +9280,15 @@ msgid_plural "" "estimation." msgstr[0] "" "Следующая строка %s содержит зарезервированные ключевые слова.\n" -"Удалите их, иначе может возникнуть проблемы при визуализации G-кода и оценка " +"Удалите их, иначе могут возникнуть проблемы при визуализации G-кода и оценка " "времени печати." msgstr[1] "" "Следующие строки %s содержат зарезервированные ключевые слова.\n" -"Удалите их, иначе может возникнуть проблемы при визуализации G-кода и оценка " +"Удалите их, иначе могут возникнуть проблемы при визуализации G-кода и оценка " "времени печати." msgstr[2] "" "Следующие строки %s содержат зарезервированные ключевые слова.\n" -"Удалите их, иначе может возникнуть проблемы при визуализации G-кода и оценка " +"Удалите их, иначе могут возникнуть проблемы при визуализации G-кода и оценка " "времени печати." msgid "Reserved keywords found" @@ -7902,7 +9298,7 @@ msgid "Setting Overrides" msgstr "Переопределение параметров" msgid "Retraction" -msgstr "Откат" +msgstr "Ретракт" msgid "Basic information" msgstr "Общая информация" @@ -7912,82 +9308,87 @@ msgstr "Рекомендуемая температура сопла" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" -"Рекомендуемый диапазон температуры сопла для данной пластиковой нити. 0 " -"значит не задано." +"Рекомендуемый диапазон температуры сопла для данного филамента. 0 значит " +"температура не задана" + +msgid "Flow ratio and Pressure Advance" +msgstr "Коэффициент потока и Прогнозирование расхода" msgid "Print chamber temperature" -msgstr "Температура в камере" +msgstr "Температура в термокамере при печати" msgid "Print temperature" msgstr "Температура печати" -msgid "Nozzle" -msgstr "Сопло" - msgid "Nozzle temperature when printing" msgstr "Температура сопла при печати" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Не нагрев. пластина (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Температура платформы при установленной Cool Plate SuperTack. Значение 0 " +"означает, что филамент не подходит для печати на Cool Plate SuperTack." + +msgid "Cool Plate" msgstr "Не нагреваемая пластина" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Температура стола при установленной не нагреваемой пластине. 0 означает, что " -"пластиковая нить не поддерживает печать на этой печатной пластине." +"филамент не поддерживает печать на этой печатной пластине." -# ??????? Текстурированная не нагреваемая пластина Bambu, Текстурированная пластина Bambu -msgid "Textured Cool plate" -msgstr "Не нагреваемая текстур. пластина Bambu" +msgid "Textured Cool Plate" +msgstr "Ненагреваемая текстурированная пластина Bambu" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"Температура стола при установленной не нагреваемой текстурированной пластине " -"Bambu. 0 означает, что пластиковая нить не поддерживает печать на этой " -"печатной пластине." +"Температура стола при установленной не нагреваемой текстурированной " +"пластине. 0 означает, что филамент не поддерживает печать на этой печатной " +"пластине." -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "Инженерная пластина" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Температура стола при установленной инженерной печатной пластине. 0 " -"означает, что пластиковая нить не поддерживает печать на этой печатной " -"пластине." +"означает, что филамент не поддерживает печать на этой печатной пластине." msgid "Smooth PEI Plate / High Temp Plate" msgstr "Гладкая PEI/высокотемп. пластина" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Температура стола при установленной гладкой PEI/высокотемпературный печатной " -"пластине. 0 означает, что пластиковая нить не поддерживает печать на этой " -"печатной пластине." +"пластине. 0 означает, что филамент не поддерживает печать на этой печатной " +"пластине." msgid "Textured PEI Plate" msgstr "Текстурированная PEI пластина" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Температура стола при установленной текстурированной пластите с PEI " -"покрытием. 0 означает, что пластиковая нить не поддерживает печать на этой " -"печатной пластине." +"Температура стола при установленной текстурированной PEI пластите. 0 " +"означает, что филамент не поддерживает печать на этой печатной пластине." +# ??? объёмной скорости msgid "Volumetric speed limitation" -msgstr "Ограничение объёмной скорости" - -msgid "Cooling" -msgstr "Охлаждение" +msgstr "Ограничение объёмного расхода" msgid "Cooling for specific layer" msgstr "Обдув определенного слоя" @@ -8004,11 +9405,11 @@ msgid "" "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"Вентилятор для охлаждения моделей начнет работать с минимальной скоростью, " +"Вентилятор для охлаждения моделей начнёт работать с минимальной скоростью, " "когда расчётное время печати слоя не превышает заданное время печати слоя. " "Если время печати слоя меньше порогового значения, скорость вентилятора " "интерполируется между минимальной и максимальной скоростью вентилятора в " -"зависимости от времени печати слоя." +"зависимости от времени печати слоя" msgid "Max fan speed threshold" msgstr "Порог макс. скорости вентилятора" @@ -8018,49 +9419,56 @@ msgid "" "than the setting value" msgstr "" "Скорость вентилятора для охлаждения детали будет максимальной, если " -"расчётное время печати слоя меньше установленного значения." +"расчётное время печати слоя меньше установленного значения" msgid "Auxiliary part cooling fan" -msgstr "Вспомогательный вентилятор для охлаждения моделей" +msgstr "Вспомогательный вентилятор модели" msgid "Exhaust fan" msgstr "Вытяжной вентилятор" -# ??? Скорость во время печати msgid "During print" msgstr "Скорость вентилятора во время печати" -# ??? Скорость после завершения печати msgid "Complete print" msgstr "Скорость вентилятора после завершения печати" msgid "Filament start G-code" -msgstr "Стартовый G-код прутка" +msgstr "Стартовый G-код филамента" msgid "Filament end G-code" -msgstr "Завершающий G-код прутка" - -msgid "Multimaterial" -msgstr "Экструдер ММ" +msgstr "G-код конца филамента" msgid "Wipe tower parameters" msgstr "Параметры черновой башни" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" msgstr "" -"Параметры смены инструмента в одноэкструдерных мультиматериальных принтерах" -msgid "Ramming settings" -msgstr "Настройки рэмминга" - -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with single extruder MM printers" msgstr "" -"Параметры смены инструмента в многоэкструдерных мультиматериальных принтерах" +"Параметры смены инструмента в одноэкструдерных мульти-филаментных принтерах" + +msgid "Set" +msgstr "Выбор" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "" +"Параметры смены инструмента в многоэкструдерных мульти-филаментных принтерах" + +msgid "Dependencies" +msgstr "Зависимости" + +msgid "Compatible printers" +msgstr "Совместимые профили принтеров" + +msgid "Compatible process profiles" +msgstr "Совместимые профили процессов" msgid "Printable space" msgstr "Область печати" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Указано недопустимое значение параметра %1%: %2%" @@ -8083,7 +9491,7 @@ msgstr "Адаптивная сетка стола" msgid "Accessory" msgstr "Аксессуары" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "G-код принтера" msgid "Machine start G-code" @@ -8101,9 +9509,12 @@ msgstr "G-код перед сменой слоя" msgid "Layer change G-code" msgstr "G-код после смены слоя" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "G-код таймлапса" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "G-код смены прутка" @@ -8122,6 +9533,13 @@ msgstr "Ограничения принтера" msgid "Normal" msgstr "Обычный" +msgid "Resonance Avoidance" +msgstr "Предотвращение резонанса" + +# ??? Скорость предотвращение резонанса, Диапазон скоростей при которых возникает резонанс и стоит снизить скорость до минимальной, Избегать диапазона скоростей, Скорость избегания резонанса, Резонансоопасные скорости +msgid "Resonance Avoidance Speed" +msgstr "Диапазон скоростей избегания резонанса" + msgid "Speed limitation" msgstr "Максимальные скорости перемещения" @@ -8129,37 +9547,69 @@ msgid "Acceleration limitation" msgstr "Максимальные ускорения" msgid "Jerk limitation" -msgstr "Максимальные рывки" +msgstr "Ограничение рывка" -msgid "Single extruder multimaterial setup" -msgstr "Мультиматериальный одиночный экструдер" +msgid "Single extruder multi-material setup" +msgstr "Настройки для одного экструдера при работе с несколькими материалами" + +msgid "Number of extruders of the printer." +msgstr "Количество экструдеров принтера." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Выбран одиночный мультиматериальный экструдер, \n" +"поэтому все экструдеры должны иметь одинаковый диаметр.\n" +"Изменить диаметр всех экструдеров на значение диаметра сопла первого " +"экструдера?" + +msgid "Nozzle diameter" +msgstr "Диаметр сопла" msgid "Wipe tower" msgstr "Черновая башня" -msgid "Single extruder multimaterial parameters" -msgstr "Параметры мультиматериального одиночного экструдера" +msgid "Single extruder multi-material parameters" +msgstr "Настройки для одного экструдера при работе с несколькими материалами" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Это принтер с одиночным мульти-филаментым экструдером, диаметры всех " +"экструдеров будут установлены на новое значение. Продолжить?" msgid "Layer height limits" msgstr "Ограничение высоты слоя" -msgid "Lift Z Enforcement" -msgstr "Принудительный подъем оси Z" +msgid "Z-Hop" +msgstr "Подъём оси Z" msgid "Retraction when switching material" -msgstr "Откат при смене материала" +msgstr "Ретракт при смене материала" msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"Параметр прочистки недоступен при использовании отката из прошивки.\n" +"Параметр прочистки недоступен при использовании ретракта из прошивки.\n" "\n" -"Отключить его для включения отката из прошивки?" +"Отключить его для включения ретракта из прошивки?" msgid "Firmware Retraction" -msgstr "Откат из прошивки" +msgstr "Ретракт из прошивки" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" msgstr "Отсоединён" @@ -8169,18 +9619,18 @@ msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"К этому принтеру прикреплено: \n" -"профилей прутка -%d шт. и профилей процесса печати - %d шт.\n" -"При удалении принтера эти профили так же будут удалены." +"К этому принтеру подключены %d предустановки филамента и %d предустановки " +"процесса. Эти предустановки будут удалены при удалении принтера." -msgid "Presets inherited by other presets can not be deleted!" -msgstr "Профили на которых основаны другие профили не могут быть удалены!" +# ??? Профили, наследуемые от других профилей, не могут быть удалены. +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "Профили, на которых основаны другие профили, не могут быть удалены!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "Профиль указанный ниже, наследуется от текущего профиля." -msgstr[1] "Профили указанные ниже, наследуются от текущего профиля." -msgstr[2] "Профили указанные ниже, наследуются от текущего профиля." +msgstr[0] "Профиль, указанный ниже, наследуется от текущего профиля." +msgstr[1] "Профили, указанные ниже, наследуются от текущего профиля." +msgstr[2] "Профили, указанные ниже, наследуются от текущего профиля." #. TRN Remove/Delete #, boost-format @@ -8193,25 +9643,17 @@ msgstr[0] "Следующий профиль также будет удалён. msgstr[1] "Следующие профили также будут удалены." msgstr[2] "Следующие профили также будут удалены." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Вы уверены, что хотите удалить выбранный профиль? \n" -"Если этот профиль используется в данный момент в вашем принтере, пожалуйста, " -"сбросьте информацию о прутке для этого слота." - #, boost-format msgid "Are you sure to %1% the selected preset?" -msgstr "%1% выбранный профиль?" +msgstr "Вы уверены, что %1% выбранный профиль?" -# в Обеспечивать верт. толщину оболочки -msgid "All" -msgstr "Везде" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Выбор" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "Нажмите, чтобы сбросить текущее значение до глобального значения." @@ -8229,7 +9671,7 @@ msgid "Unsaved Changes" msgstr "Несохранённые изменения" msgid "Transfer or discard changes" -msgstr "Отклонить или сохранить изменения" +msgstr "Выбор действия при изменённых параметрах профиля" msgid "Old Value" msgstr "Старое значение" @@ -8301,15 +9743,15 @@ msgstr "" "несохранённые изменения:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "Вы изменили некоторые параметры профиля \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Вы изменили параметры профиля \"%1%\"." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" -"Вы можете сохранить или сбросить изменённые вами значения профиля." +"Вы можете сохранить сделанные изменения или отказаться от их сохранения." msgid "" "\n" @@ -8317,8 +9759,8 @@ msgid "" "transfer the values you have modified to the new preset." msgstr "" "\n" -"Вы можете сохранить или сбросить изменённые вами значения профиля, или " -"перенести их в новый профиль." +"Вы можете сохранить сделанные изменения или отказаться от их сохранения. Или " +"же перенести их в новый созданный профиль." msgid "You have previously modified your settings." msgstr "Ранее вы изменили свои настройки." @@ -8329,15 +9771,12 @@ msgid "" "the modified values to the new project" msgstr "" "\n" -"Вы можете сбросить изменённые вами значения профиля, или перенести их в " -"новый проект." +"Вы можете отказаться от сохранения изменений сделанных в профиле или же " +"перенести их в новый созданный профиль" msgid "Extruders count" msgstr "Количество экструдеров" -msgid "General" -msgstr "Общие" - msgid "Capabilities" msgstr "Характеристики принтера" @@ -8402,6 +9841,9 @@ msgstr "Автор" msgid "Model Name" msgstr "Имя модели" +msgid "Description:" +msgstr "Описание:" + #, c-format, boost-format msgid "%s Update" msgstr "Обновление %s" @@ -8410,103 +9852,255 @@ msgid "A new version is available" msgstr "Доступна новая версия" msgid "Configuration update" -msgstr "Обновление конфигурации" +msgstr "Обновление профиля" -msgid "A new configuration package available, Do you want to install it?" -msgstr "Доступен новый пакет конфигурации. Установить его?" - -msgid "Description:" -msgstr "Описание:" +msgid "A new configuration package is available. Do you want to install it?" +msgstr "Доступен новый пакет профилей. Установить его?" msgid "Configuration incompatible" -msgstr "Несовместимая конфигурация" +msgstr "Несовместимый профиль" -msgid "the configuration package is incompatible with current application." -msgstr "пакет конфигурации несовместим с текущим приложением." +msgid "the configuration package is incompatible with the current application." +msgstr "пакет профилей несовместим с текущим приложением." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" -"Пакет конфигурации несовместим с текущим приложением.\n" -"%s обновит пакет конфигурации, иначе он не сможет запуститься." +"Пакет профилей несовместим с текущим приложением.\n" +"%s обновит пакет профилей, иначе он не сможет запуститься." #, c-format, boost-format msgid "Exit %s" msgstr "Выйти из %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "пакет конфигурации несовместим с текущим приложением." - msgid "Configuration updates" -msgstr "Обновления конфигурации" +msgstr "Обновление профилей" msgid "No updates available." msgstr "Обновления отсутствуют." msgid "The configuration is up to date." -msgstr "Текущая конфигурация не требует обновления." +msgstr "Конфигурация актуальна." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Импорт цветного obj-файла" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "Количество цветов:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "Количество цветов должно быть в диапазоне [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "рекомендуется" +msgstr "Рекомендуется " -msgid "Current filament colors:" -msgstr "Текущие цвета прутков:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Быстрый выбор:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" # ??? Цветовая схема msgid "Color match" msgstr "Подбор цвета" msgid "Approximate color matching." -msgstr "Приблизительный подбор по цвету прутков." +msgstr "Приблизительный подбор по цвету ваших филамента." # ??? msgid "Append" msgstr "Добавить" -# ?????? Добавить используемый экструдер после существующих экструдеров, Добавьте новый экструдер после существующих экструдеров, Добавить экструдер с расходным материалом после существующих экструдеров. -msgid "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" msgstr "" -"Добавить экструдер с расходными материалами после существующих экструдеров." # ??? msgid "Reset mapped extruders." msgstr "Сброс сопоставленных экструдеров." -msgid "Cluster colors" -msgstr "Цветовой кластер" - -# ??? Цвет прутка -msgid "Map Filament" -msgstr "Выбранные цвета" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Примечание: цвета уже выбраны, вы можете нажать «OK» \n" -" для продолжения или подобрать его вручную." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Использовать AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Выбранный принтер (%s) несовместим с профилем принтера (%s), выбранным в " +"слайсере." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Таймлапс не поддерживается, поскольку для последовательности печати " +"установлено значение «Печать по очереди»." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Предупреждение: количество новых \n" -" и текущих экструдеров превышает 16." msgid "Ramming customization" msgstr "Настройки рэмминга" @@ -8522,48 +10116,37 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"Рэмминг (ramming, дословно утрамбовка) означает быстрое экструдирование " -"непосредственно перед сменой инструмента в одноэкструдерном " -"мультиматериальном принтере. Цель процесса состоит в том, чтобы правильно " -"сформировать конец выгружаемого прутка, чтобы он не препятствовал вставке " -"нового прутка или этого же прутка, вставленного позже. Эта фаза важна и " -"разные материалы могут потребовать разных скоростей экструзии, чтобы " -"получить хорошую форму. По этой причине скорость экструзии во время рэмминга " -"регулируется.\n" +"Рэмминг (ramming) означает быстрая экструзия непосредственно перед сменой " +"инструмента в одноэкструдерном мультимфиламентном принтере. Цель процесса " +"состоит в том, чтобы правильно сформировать конец выгружаемого филамента, " +"чтобы он не препятствовал вставке нового филамента или этого же филамента, " +"вставленного позже. Эта фаза важна и разные материалы могут потребовать " +"разных скоростей экструзии, чтобы получить хорошую форму. По этой причине " +"скорость экструзии во время рэмминга регулируется.\n" "\n" "Эта опция для опытных пользователей, неправильная настройка может привести к " "замятию, протиранию прутка приводом экструдера и т.д." -msgid "Total ramming time" -msgstr "Общее время рэмминга" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" +"Для постоянного объёмного расхода удерживайте нажатой клавишу %1% при " +"перетаскивании." -msgid "s" -msgstr "с" +msgid "Total ramming" +msgstr "Полный рэмминг" -msgid "Total rammed volume" -msgstr "Общий объём при рэмминге" +msgid "Volume" +msgstr "Объем" -msgid "Ramming line width" -msgstr "Ширина линии при рэмминге" - -msgid "Ramming line spacing" -msgstr "Расстояние между линиями при рэмминге" - -msgid "Auto-Calc" -msgstr "Авторасчёт" - -msgid "Re-calculate" -msgstr "Пересчитать" - -msgid "Flushing volumes for filament change" -msgstr "Объёмы очистки при смене пластиковой нити" +msgid "Ramming line" +msgstr "Линия рэмминга" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Программа будет пересчитывать объёмы очистки каждый раз при изменении цвета " -"пластиковых нитей. Это можно отключить в меню Snapmaker Orca > Параметры." msgid "Flushing volume (mm³) for each filament pair." msgstr "" @@ -8578,23 +10161,23 @@ msgstr "Рекомендуемый объём очистки в диапазон msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Множитель должен находиться в диапазоне [%.2f - %.2f]." +msgid "Re-calculate" +msgstr "Пересчитать" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Множитель" -msgid "unloaded" -msgstr "выгрузку" +msgid "Flushing volumes for filament change" +msgstr "Объёмы очистки при смене филамента" -msgid "loaded" -msgstr "загрузку" - -msgid "Filament #" -msgstr "Пруток #" - -msgid "From" -msgstr "С" - -msgid "To" -msgstr "На" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8608,11 +10191,11 @@ msgid "" "to re-register it. You will be promoted twice" msgstr "" "Компонент BambuSource неправильно зарегистрирован для воспроизведения " -"медиафайлов! Нажмите «Да», чтобы повторно зарегистрировать его." +"медиафайлов! Нажмите «Да», чтобы повторно зарегистрировать его" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Отсутствует компонент BambuSource зарегистрированный для воспроизведения " "медиафайлов! Переустановите BambuStutio или обратитесь за помощью в службу " @@ -8622,17 +10205,18 @@ msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" -"Используя компоненты BambuSource из другого инсталлятора воспроизведение " -"видео может работать некорректно! Нажмите «Да», чтобы исправить это." +"При использовании компонентов BambuSource из другого инсталлятора, " +"воспроизведение видео может работать некорректно! Нажмите «Да», чтобы " +"исправить это." msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "В вашей системе отсутствуют кодеки H.264 для GStreamer, которые необходимы " -"для воспроизведения видео. Попробуйте установить пакеты gstreamer1.0-plugins-" -"bad или gstreamer1.0-libav, а затем перезапустите Snapmaker Orca." +"для воспроизведения видео. (Попробуйте установить пакеты gstreamer1.0-" +"plugins-bad или gstreamer1.0-libav, а затем перезапустить Snapmaker Orca)" msgid "Bambu Network plug-in not detected." msgstr "Сетевой плагин Bambu не обнаружен." @@ -8644,11 +10228,10 @@ msgid "Login" msgstr "Войти" msgid "The configuration package is changed in previous Config Guide" -msgstr "" -"Пакет конфигурации был изменён при предыдущем запуске мастера настройки." +msgstr "Пакет профилей был изменён при предыдущем запуске мастера настройки" msgid "Configuration package changed" -msgstr "Пакет конфигурации изменён" +msgstr "Пакет профилей изменён" msgid "Toolbar" msgstr "Панель инструментов" @@ -8659,19 +10242,11 @@ msgstr "Список моделей" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Импорт геометрических данных из STL/STEP/3MF/OBJ/AMF файлов" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Вставить из буфера обмена" msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "" -"Показать/Скрыть диалоговое окно настроек \n" -"устройств 3Dconnexion" +msgstr "Показать/скрыть диалоговое окно настроек устройств 3Dconnexion" msgid "Switch table page" msgstr "Переключение между вкладками" @@ -8682,67 +10257,42 @@ msgstr "Показать список сочетаний клавиш" msgid "Global shortcuts" msgstr "Глобальные горячие клавиши" -msgid "Rotate View" -msgstr "Вращение камеры" - msgid "Pan View" msgstr "Перемещение камеры" -msgid "Mouse wheel" -msgstr "Колесо мыши" +msgid "Rotate View" +msgstr "Вращение камеры" msgid "Zoom View" msgstr "Масштабирование вида" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"Автоориентация моделей (ориентация выбранного, иначе всего на текущем столе)" +"Автоориентация выбранных или всех моделей. Если выбраны отдельные модели, " +"ориентация будет применена только к ним; в противном случае ко всем моделям " +"на текущем столе." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Автоориентация всех моделей на текущей печатной пластине." msgid "Collapse/Expand the sidebar" msgstr "Свернуть/Развернуть боковую панель" -msgid "⌘+Any arrow" -msgstr "⌘ + Любая стрелка" +msgid "Any arrow" +msgstr "Любая стрелка" msgid "Movement in camera space" msgstr "Перемещение выбранного по отношению к камере" -msgid "⌥+Left mouse button" -msgstr "⌥ + Левая кнопка мыши" - msgid "Select a part" msgstr "Выбор части модели" -msgid "⌘+Left mouse button" -msgstr "⌘ + Левая кнопка мыши" - msgid "Select multiple objects" msgstr "Выбор нескольких моделей" -msgid "Ctrl+Any arrow" -msgstr "Ctrl + Любая стрелка" - -msgid "Alt+Left mouse button" -msgstr "Alt + Левая кнопка мыши" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl + Левая кнопка мыши" - -msgid "Shift+Left mouse button" -msgstr "Shift + Левая кнопка мыши" - msgid "Select objects by rectangle" msgstr "Выбор прямоугольником" @@ -8770,14 +10320,11 @@ msgstr "Стрелка вправо" msgid "Move selection 10 mm in positive X direction" msgstr "Перемещение выбранного на 10 мм по оси X+" -msgid "Shift+Any arrow" -msgstr "Shift + Любая стрелка" - msgid "Movement step set to 1 mm" msgstr "Зафиксировать шаг перемещения на 1 мм" msgid "keyboard 1-9: set filament for object/part" -msgstr "Клавиши 1-9: задать пруток для модели/части модели" +msgstr "клавиши 1-9: задать филамент для модели/части модели" msgid "Camera view - Default" msgstr "Камера по умолчанию" @@ -8804,28 +10351,43 @@ msgid "Select all objects" msgstr "Выбрать все модели" msgid "Gizmo move" -msgstr "Гизмо перемещения" - -msgid "Gizmo scale" -msgstr "Гизмо масштаба" +msgstr "Гизмо: Перемещения" msgid "Gizmo rotate" -msgstr "Гизмо поворота" +msgstr "Гизмо: Вращение" + +msgid "Gizmo scale" +msgstr "Гизмо: Масштаб" + +msgid "Gizmo place face on bed" +msgstr "Гизмо: Поверхностью на стол" msgid "Gizmo cut" -msgstr "Гизмо разреза" +msgstr "Гизмо: Разрез" -msgid "Gizmo Place face on bed" -msgstr "Гизмо поверхностью на стол" +msgid "Gizmo mesh boolean" +msgstr "Гизмо: Булевы операции" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Гизмо: Рисование нечеткой оболочки" msgid "Gizmo SLA support points" -msgstr "Гизмо точки SLA поддержки" +msgstr "Гизмо: Точки SLA поддержки" msgid "Gizmo FDM paint-on seam" -msgstr "Гизмо рисования шва (FDM)" +msgstr "Гизмо: рисования шва (FDM)" -msgid "Gizmo Text emboss / engrave" -msgstr "Гизмо рельефного/выгравированного текста" +msgid "Gizmo text emboss/engrave" +msgstr "Гизмо: Рельефный/выгравированный текст" + +msgid "Gizmo measure" +msgstr "Гизмо: Измерение" + +msgid "Gizmo assemble" +msgstr "Гизмо: Объединение в сборку" + +msgid "Gizmo brim ears" +msgstr "Гизмо: кайма «мышиные уши»" msgid "Zoom in" msgstr "Приблизить" @@ -8842,23 +10404,11 @@ msgstr "Печатная пластина" msgid "Move: press to snap by 1mm" msgstr "Перемещение: Фиксация перемещения на 1 мм" -msgid "⌘+Mouse wheel" -msgstr "⌘+Колесо мыши" - msgid "Support/Color Painting: adjust pen radius" -msgstr "Рисование поддержки/Шва/Покраски: регулировка радиуса кисти" - -msgid "⌥+Mouse wheel" -msgstr "⌥+Колесо мыши" +msgstr "Рисование поддержек/Шва/Покраски: регулировка радиуса кисти" msgid "Support/Color Painting: adjust section position" -msgstr "Рисование поддержки/Шва/Покраски: регулировка положения сечения" - -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Колесо мыши" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Колесо мыши" +msgstr "Рисование поддержек/Шва/Покраски: регулировка положения сечения" msgid "Gizmo" msgstr "Гизмо" @@ -8866,17 +10416,17 @@ msgstr "Гизмо" msgid "Set extruder number for the objects and parts" msgstr "Задать номер экструдера для моделей/частей" -msgid "Delete objects, parts, modifiers " -msgstr "Удаление моделей, частей, модификаторов " +msgid "Delete objects, parts, modifiers" +msgstr "Удаление моделей, частей, модификаторов" msgid "Select the object/part and press space to change the name" msgstr "Выберите модель/часть и нажмите пробел, чтобы изменить имя" msgid "Mouse click" -msgstr "Щелчок кнопкой мыши" +msgstr "Левая кнопка мыши" msgid "Select the object/part and mouse click to change the name" -msgstr "Выберите модель/часть и нажмите клавишу мыши, чтобы изменить имя" +msgstr "Выберите модель/часть и нажмите левую клавишу мыши, чтобы изменить имя" msgid "Objects List" msgstr "Список моделей" @@ -8897,15 +10447,12 @@ msgid "On/Off one layer mode of the vertical slider" msgstr "" "Включение/Отключение функции «Режим одного слоя» у вертикального ползунка" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "Показать/скрыть окно отображения G-кода" msgid "Move slider 5x faster" msgstr "Перемещение ползунка быстрее в 5 раз" -msgid "Shift+Mouse wheel" -msgstr "Shift + Колесо мыши" - msgid "Horizontal slider - Move to start position" msgstr "Горизонтальный ползунок - Перемещение в начальную позицию" @@ -8916,8 +10463,8 @@ msgid "Release Note" msgstr "Информация о версии" #, c-format, boost-format -msgid "version %s update information :" -msgstr "Информация об обновлении версии %s:" +msgid "version %s update information:" +msgstr "информация об обновлении версии %s:" msgid "Network plug-in update" msgstr "Обновление сетевого плагина" @@ -8928,7 +10475,7 @@ msgstr "" "Нажмите OK, чтобы обновить сетевой плагин при следующем запуске Snapmaker Orca." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Доступен новый сетевой плагин (%s). Хотите установить?" msgid "New version of Snapmaker Orca" @@ -8937,67 +10484,29 @@ msgstr "Доступна новая версия Snapmaker Orca" msgid "Skip this Version" msgstr "Пропустить эту версию" -msgid "Done" -msgstr "Готово" - -msgid "resume" -msgstr "Продолжить" - -msgid "Resume Printing" -msgstr "Возобновить печать" - -msgid "Resume Printing(defects acceptable)" -msgstr "Возобновить печать (допустимы дефекты)" - -msgid "Resume Printing(problem solved)" -msgstr "Возобновить печать (проблема решена)" - -msgid "Stop Printing" -msgstr "Остановить печать" - -# ??? Перейти к помощнику, Помощник по проверке -msgid "Check Assistant" -msgstr "Ассистент проверки" - -msgid "Filament Extruded, Continue" -msgstr "Пруток выдавлен, Продолжить" - -msgid "Not Extruded Yet, Retry" -msgstr "Пруток ещё не выдавлен, Повторить" - -# ????? Готово -msgid "Finished, Continue" -msgstr "Завершено, Продолжить" - -# кнопка в интерфейсе -msgid "Load Filament" -msgstr "Загрузить" - -msgid "Filament Loaded, Resume" -msgstr "Пруток загружен, Повторить" - -# ??? Просмотр камеры, Посмотреть, Открыть прямую трансляцию -msgid "View Liveview" -msgstr "Открыть видеотрансляцию" - msgid "Confirm and Update Nozzle" msgstr "Подтвердить и обновить сопло" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Сбой подключения к локальной сети (отправка файла на печать)" +msgid "Connect the printer using IP and access code" +msgstr "Подключение к принтеру с помощью IP-адреса и кода доступа" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Шаг 1. Пожалуйста, убедитесь, что Snapmaker Orca и ваш принтер находятся в " -"одной локальной сети." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Шаг 2. Если приведенный ниже IP-адрес и код доступа отличаются от " -"фактических значений на вашем принтере, пожалуйста, исправьте их." msgid "IP" msgstr "IP" @@ -9005,19 +10514,46 @@ msgstr "IP" msgid "Access Code" msgstr "Код доступа" +msgid "Printer model" +msgstr "Модель принтера" + +msgid "Printer name" +msgstr "Имя принтера" + msgid "Where to find your printer's IP and Access Code?" msgstr "Где найти IP-адрес и код доступа к вашему принтеру?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Шаг 3. Пропингуйте IP-адрес, чтобы проверить потерю пакетов и задержку." +msgid "Connect" +msgstr "Подключить" -msgid "Test" -msgstr "Тест" +msgid "Manual Setup" +msgstr "Ручная настройка" msgid "IP and Access Code Verified! You may close the window" msgstr "IP-адрес и код доступа подтверждены! Вы можете закрыть окно." +msgid "connecting..." +msgstr "подключение..." + +msgid "Failed to connect to printer." +msgstr "Не удалось подключиться к принтеру." + +msgid "Failed to publish login request." +msgstr "Не удалось опубликовать запрос на вход в систему." + +msgid "The printer has already been bound." +msgstr "Принтер уже привязан." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" +"Неправильный режим работы принтера, пожалуйста, переключитесь на режим " +"«Только LAN»." + +msgid "Connecting to printer... The dialog will close later" +msgstr "" +"Подключение к принтеру... Диалоговое окно закроется само, когда подключение " +"будет успешно выполнено" + msgid "Connection failed, please double check IP and Access Code" msgstr "" "Не удалось подключиться, пожалуйста, перепроверьте IP-адрес и код доступа" @@ -9026,35 +10562,55 @@ msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" -"Не удалось подключиться! Если ваш IP-адрес и код доступа верные,\n" -"тогда перейдите к шагу 3 для устранения проблем с сетью." +"Не удалось подключиться! Если ваш IP-адрес и код доступа указаны верно,\n" +"перейдите к шагу 3 для устранения проблем с сетью" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "Воздушный насос" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "Модуль обрезки" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" msgstr "Модель:" -msgid "Serial:" -msgstr "Серийный номер:" - -msgid "Version:" -msgstr "Версия:" - msgid "Update firmware" msgstr "Обновить прошивку" msgid "Beta version" msgstr "Бета-версия" -msgid "Latest version" -msgstr "Последняя версия" - msgid "Updating" msgstr "Обновление" -msgid "Updating failed" -msgstr "Сбой при обновлении" +msgid "Update failed" +msgstr "Сбой обновления" -msgid "Updating successful" -msgstr "Обновление успешно выполнено" +msgid "Update successful" +msgstr "Обновление успешно завершено" msgid "" "Are you sure you want to update? This will take about 10 minutes. Do not " @@ -9079,13 +10635,13 @@ msgid "" msgstr "" "Ошибка в версии прошивки. Перед печатью её необходимо исправить и обновить. " "Хотите обновить сейчас? Вы можете сделать это позже с принтера или при " -"следующем запуске программы." +"следующем запуске Snapmaker Orca." msgid "Extension Board" msgstr "Плата расширения" -msgid "Saving objects into the 3mf failed." -msgstr "Произошла ошибка при сохранении моделей в 3mf файл." +msgid "Saving objects into the 3MF failed." +msgstr "Произошла ошибка при сохранении моделей в 3MF файл." msgid "Only Windows 10 is supported." msgstr "Поддерживается только Windows 10." @@ -9100,37 +10656,37 @@ msgid "Failed loading objects." msgstr "Ошибка загрузки модели." msgid "Repairing object by Windows service" -msgstr "Починка модели службой Windows." +msgstr "Починка модели службой Windows" msgid "Repair failed." msgstr "Не удалось починить модель." msgid "Loading repaired objects" -msgstr "Загрузка отремонтированной модели." +msgstr "Загрузка отремонтированной модели" -msgid "Exporting 3mf file failed" -msgstr "Ошибка экспорта 3mf файла" +msgid "Exporting 3MF file failed" +msgstr "Ошибка экспорта 3MF файла" -msgid "Import 3mf file failed" -msgstr "Сбой импорта 3mf файла" +msgid "Import 3MF file failed" +msgstr "Сбой импорта 3MF файла" -msgid "Repaired 3mf file does not contain any object" +msgid "Repaired 3MF file does not contain any object" msgstr "Отремонтированный 3MF файл не содержит никаких моделей" -msgid "Repaired 3mf file contains more than one object" +msgid "Repaired 3MF file contains more than one object" msgstr "Отремонтированный 3MF файл содержит более одной модели" -msgid "Repaired 3mf file does not contain any volume" +msgid "Repaired 3MF file does not contain any volume" msgstr "Отремонтированный 3MF файл не содержит объёма" -msgid "Repaired 3mf file contains more than one volume" +msgid "Repaired 3MF file contains more than one volume" msgstr "Отремонтированный 3MF файл содержит более одного объёма" msgid "Repair finished" -msgstr "Починка модели завершена." +msgstr "Починка модели завершена" msgid "Repair canceled" -msgstr "Починка модели отменена." +msgstr "Починка модели отменена" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" @@ -9138,10 +10694,10 @@ msgstr "Не удалось скопировать файл %1% в %2%: %3%" msgid "Need to check the unsaved changes before configuration updates." msgstr "" -"Перед обновлением конфигурации необходимо проверить несохранённые изменения." +"Перед обновлением профилей необходимо проверить несохранённые изменения." msgid "Configuration package: " -msgstr "Пакет конфигурации: " +msgstr "Пакет профилей: " msgid " updated to " msgstr " обновлён до " @@ -9168,18 +10724,26 @@ msgid "" "Maybe parts of the object at these height are too thin, or the object has " "faulty mesh" msgstr "" -"Возможно, части модели на этой высоте слишком тонкие, или она имеет " -"дефектную сетку." +"Возможно, части модели на этой высоте слишком тонкие, или объект имеет " +"дефектную сетку" msgid "No object can be printed. Maybe too small" -msgstr "Печать моделей невозможна. Возможно, они слишком маленькие." +msgstr "Печать моделей невозможна. Возможно, они слишком маленькие" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Модель(-и) находится очень близко к области предзарядки (область подготовки " +"экструдера). Убедитесь, что не произойдёт столкновения." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Не удалось сгенерировать G-код из-за недопустимого пользовательского G-" "кода.\n" +"\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "" @@ -9190,14 +10754,23 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "Генерация G-кода: слой %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" -msgstr "Внутренние периметры" +msgstr "Внутренняя стенка" msgid "Outer wall" -msgstr "Внешний периметр" +msgstr "Внешняя стенка" msgid "Overhang wall" -msgstr "Нависающие периметры" +msgstr "Нависающие стенка" msgid "Sparse infill" msgstr "Заполнение" @@ -9227,9 +10800,9 @@ msgid "Multiple" msgstr "Множитель" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" -"Не удалось вычислить ширину линии %1%. Не удается получить значение \"%2%\". " +"Не удалось вычислить ширину линии %1%. Не удаётся получить значение \"%2%\". " msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " @@ -9263,7 +10836,7 @@ msgid "not a ZIP archive" msgstr "это не ZIP архив" msgid "invalid header or corrupted" -msgstr "неверный или поврежденный заголовок" +msgstr "неверный или повреждённый заголовок" msgid "unsupported multidisk" msgstr "неподдерживаемый многотомный архив" @@ -9336,48 +10909,67 @@ msgid "" "%1% is too close to exclusion area, there may be collisions when printing." msgstr "" "%1% находится слишком близко к области исключения, что может привести к " -"столкновению при печати." +"колизии при печати." #, boost-format msgid "%1% is too close to others, and collisions may be caused." -msgstr "" -"%1% находится слишком близко к другим, что может привести к столкновению." +msgstr "%1% находится слишком близко к другим, что может привести к колизии." #, boost-format msgid "%1% is too tall, and collisions will be caused." -msgstr "Модель «%1%» слишком высокая, что может привести к столкновению." - -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" находится слишком близко к другим моделям, что может привести к " -"столкновению при печати." +msgstr "Модель «%1%» слишком высокая, что может привести к колизии." msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" -" находится слишком близко к области исключения, что может привести к " -"столкновению при печати." +" находится слишком близко к области исключения, что может привести к колизии " +"при печати." + +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" msgid "Prime Tower" msgstr "Черновая башня" msgid " is too close to others, and collisions may be caused.\n" msgstr "" -" находится слишком близко к другим моделям, что может привести к " -"столкновению.\n" +" находится слишком близко к другим моделям, что может привести к колизии.\n" msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "" " находится слишком близко к области исключения, что может привести к " -"столкновению.\n" +"колизии.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Не допускается совместная печать несколькими материалами, имеющими большую " -"разницу в температуре печати. Это может привести к засорению и повреждению " -"сопла и экструдера." msgid "No extrusions under current settings." msgstr "При текущих настройках экструзия отсутствует." @@ -9389,6 +10981,15 @@ msgstr "" "Плавный режим таймлапса не поддерживается, когда включена последовательность " "печати моделей по очереди." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9403,6 +11004,14 @@ msgstr "" "Режим «Спиральная ваза» не работает, когда модель печатается несколькими " "материалами." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"После применения компенсации усадки, модель %1% начинает превышать " +"максимальную высоту области построения." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Высота модели %1% превышает максимально допустимую области построения." @@ -9427,11 +11036,13 @@ msgstr "" "Функция переменной высоты слоя не совместима с органическими поддержками." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"При включении черновой башни не допускается использования разных диаметров " -"сопел и разных диаметров пластиковой нити." +"Использование разных диаметров сопла и разных диаметров филамента может " +"привести к некорректной нарезке при включенной черновой башни. Этот метод " +"работы экспериментальный, поэтому, будьте осторожны при использовании." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9441,10 +11052,11 @@ msgstr "" "относительная адресация экструдера (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Предотвращение течи материала с помощью черновой башни в настоящее время не " -"поддерживается." +"Предотвращение течи материала с помощью черновой башни поддерживается только " +"когда параметр «Одноэкструдерный мультиматериальный принтер» отключён." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9463,22 +11075,30 @@ msgstr "" "Черновой башни не поддерживается, когда включена функция переменной высоты " "слоя. Требуется, чтобы все модели имели одинаковую высоту слоя." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "Для черновой башни требуется, чтобы зазор поддержки был кратен высоте слоя." -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "" "Для использования черновой башни требуется, чтобы у всех моделей была " "одинаковая высота слоя." msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Для черновой башни требуется, чтобы все модели были напечатаны на одинаковом " "количестве слоёв подложки." +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Режим черновой башни применим для нескольких моделей только в том случае, " +"если они печатаются с одинаковым зазором поддержки сверху." + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9488,21 +11108,39 @@ msgstr "" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "" "Для черновой башни требуется, чтобы все модели имели одинаковую переменную " "высоту слоя." +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Для одного или нескольких моделей был назначен экструдер, который у принтера " +"отсутствует." + msgid "Too small line width" msgstr "Слишком маленькая ширина экструзии" msgid "Too large line width" msgstr "Слишком большая ширина экструзии" +# ??? (support_filament == 0 или support_interface_filament == 0) +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Печать несколькими экструдерами с разными диаметрами сопел. Если поддержка " +"должна быть напечатана текущим филаментом («Филамент базовой поддержки/" +"подложки» = 0 или «Филамент связующего слоя поддержки/подложки» = 0), все " +"сопла должны быть одинакового диаметра." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"Для черновой башни требуется, чтобы поддержка и модель имели одинаковую " +"Для черновой башни требуется чтобы поддержка и модель имели одинаковую " "высоту слоя." msgid "" @@ -9532,8 +11170,8 @@ msgstr "" "Используется принудительная поддержка, но её генерация не включена. " "Пожалуйста, включите генерацию поддержки в настройках слайсера." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "Высота слоя не может быть больше диаметра сопла" +msgid "Layer height cannot exceed nozzle diameter." +msgstr "Высота слоя не может быть больше диаметра сопла." msgid "" "Relative extruder addressing requires resetting the extruder position at " @@ -9561,13 +11199,13 @@ msgstr "" #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "Печатная пластина %d: %s не поддерживает пруток %s" +msgstr "Печатная пластина %d: %s не поддерживает филамент %s" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "" "Слишком низкая скорость рывка может привести к появлению артефактов на " -"изогнутых поверхностях. " +"изогнутых поверхностях" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" @@ -9579,11 +11217,26 @@ msgid "" msgstr "" "Значение максимального рывка (machine_max_jerk_x/machine_max_jerk_y) " "превышает значение заданное в настройках принтера.\n" -"Программа автоматически ограничит рывок, чтобы он не превышал возможности " +"Orca Sllicer автоматически ограничит рывок, чтобы он не превышал возможности " "принтера.\n" "Если хотите получить более высокие скорости, вы можете изменить это значение " "в настройках принтера (вкладка «Ограничение принтера»)." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9611,10 +11264,24 @@ msgstr "" "Значение ускорения перемещения превышает значение заданное в настройках " "принтера (machine_max_acceleration_travel).\n" "Программа автоматически ограничит это ускорение, чтобы оно не превышало " -"возможности принтера. \n" +"возможности принтера.\n" "Если хотите получить более высокие скорости, вы можете изменить это значение " "в настройках принтера (вкладка «Ограничение принтера»)." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"Параметр точной стенки будет проигнорирован для последовательностей стен " +"«внешняя-внутренняя» или «внутренняя-внешняя-внутренняя»." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Компенсация усадка материала не будет использоваться, поскольку усадка " +"используемых материалов существенно отличается." + msgid "Generating skirt & brim" msgstr "Генерация юбки и каймы" @@ -9627,9 +11294,15 @@ msgstr "Генерация G-кода" msgid "Failed processing of the filename_format template." msgstr "Ошибка обработки шаблона filename_format." +msgid "Printer technology" +msgstr "Технология принтера" + msgid "Printable area" msgstr "Область печати" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Область исключения" @@ -9653,8 +11326,8 @@ msgid "Elephant foot compensation" msgstr "Компенсация «слоновьей ноги»" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Уменьшение первого слоя в плоскости XY на заданное значение, чтобы " "компенсировать эффект слоновьей ноги." @@ -9677,7 +11350,7 @@ msgstr "слой(-я)" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Высота каждого слоя. Чем меньше значение, тем лучше качество, но требуется " "больше времени для печати, и наоборот." @@ -9685,14 +11358,22 @@ msgstr "" msgid "Printable height" msgstr "Высота печати" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "Максимальная высота печати, которая ограничена механикой принтера." +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "Предпочтительная ориентация" -# Автоориентация stl файлов по оси Z при первоначальном импорте. -msgid "Automatically orient stls on the Z-axis upon initial import" +# Автоориентация STL файлов по оси Z при первоначальном импорте. +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "Автоориентация моделей относительно оси Z при первоначальном импорте." msgid "Printer preset names" @@ -9701,7 +11382,7 @@ msgstr "Имена профиля принтера" msgid "Use 3rd-party print host" msgstr "Использовать сторонний хост печати" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "Позволяет управлять принтером BambuLab через сторонние хосты печати." msgid "Hostname, IP or URL" @@ -9724,10 +11405,10 @@ msgid "Device UI" msgstr "URL-адрес хоста" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Укажите URL-адрес пользовательского интерфейса вашего устройства, если он не " -"совпадает с print_host" +"совпадает с print_host." msgid "API Key / Password" msgstr "API-ключ / Пароль" @@ -9736,11 +11417,11 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orcaможет загружать файл G-кода на хост принтера. Это поле должно " +"Snapmaker Orca может загружать файл G-кода на хост принтера. Это поле должно " "содержать API ключ или пароль, необходимые для проверки подлинности." -msgid "Name of the printer" -msgstr "Название принтера" +msgid "Name of the printer." +msgstr "Название принтера." msgid "HTTPS CA File" msgstr "Файл корневого сертификата HTTPS" @@ -9772,8 +11453,8 @@ msgstr "" "автономности точек распространения. Можно включить эту опцию для " "самоподписанных сертификатов в случае сбоя подключения." -msgid "Names of presets related to the physical printer" -msgstr "Имена профилей, связанных с физическим принтером" +msgid "Names of presets related to the physical printer." +msgstr "Имена профилей, связанных с физическим принтером." msgid "Authorization Type" msgstr "Тип авторизации" @@ -9784,28 +11465,29 @@ msgstr "API-ключ" msgid "HTTP digest" msgstr "HTTP digest-авторизация" -msgid "Avoid crossing wall" -msgstr "Избегать пересечения периметров" +msgid "Avoid crossing walls" +msgstr "Избегать пересечения стенок" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" -"Объезжать и избегать пересечения периметров, для предотвращения образования " -"дефектов на поверхности модели." +"Избегать пересечения стенок для предотвращения образования дефектов на " +"поверхности модели." -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Максимальная длина обхода" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Максимальное расстояние обхода сопла от модели во избежание пересечения " -"периметров при движении. Если расстояние обхода превышает это значение, то " -"для данного маршрута эта опция не применяется. Длина обхода может быть " -"задана как в абсолютном значении, так и в процентах (например, 50%) от " -"прямого пути перемещения. 0 - отключено." +"стенок при движении. Если расстояние обхода превышает это значение, то для " +"данного маршрута эта опция не применяется. Длина обхода может быть задана " +"как в абсолютном значении, так и в процентах (например, 50%) от прямого пути " +"перемещения. 0 - отключено." msgid "mm or %" msgstr "мм или %" @@ -9814,42 +11496,46 @@ msgid "Other layers" msgstr "Последующие слои" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" -"Температура стола для всех слоёв, кроме первого. 0 означает, что пластиковая " -"нить не поддерживает печать на этой печатной пластине." - -msgid "°C" -msgstr "°C" +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на печатной пластине Cool Plate SuperTack." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -"Температура стола для всех слоёв, кроме первого. 0 означает, что пластиковая " -"нить не поддерживает печать на этой печатной пластине." +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на этой печатной пластине." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" -"Температура стола для всех слоёв, кроме первого. 0 означает, что пластиковая " -"нить не поддерживает печать на этой печатной пластине." +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на этой печатной пластине." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" -"Температура стола для всех слоёв, кроме первого. 0 означает, что пластиковая " -"нить не поддерживает печать на этой печатной пластине." +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на этой печатной пластине." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" -"Температура стола для всех слоёв, кроме первого. 0 означает, что пластиковая " -"нить не поддерживает печать на этой печатной пластине." +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на этой печатной пластине." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Температура стола для всех слоёв, кроме первого. 0 означает, что филамент не " +"поддерживает печать на этой печатной пластине." msgid "Initial layer" msgstr "Первый слой" @@ -9858,54 +11544,64 @@ msgid "Initial layer bed temperature" msgstr "Температура стола для первого слоя" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"Температура стола для первого слоя. 0 означает, что пластиковая нить не " -"поддерживает печать на этой печатной пластине." +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" -"Температура стола для первого слоя. 0 означает, что пластиковая нить не " -"поддерживает печать на этой печатной пластине." +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"Температура стола для первого слоя. 0 означает, что пластиковая нить не " -"поддерживает печать на этой печатной пластине." +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" -"Температура стола для первого слоя. 0 означает, что пластиковая нить не " -"поддерживает печать на этой печатной пластине." +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -"Температура стола для первого слоя. 0 означает, что пластиковая нить не " -"поддерживает печать на этой печатной пластине." +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." -msgid "Bed types supported by the printer" -msgstr "Типы столов, поддерживаемые принтером" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Температура стола для первого слоя. 0 означает, что филамент не поддерживает " +"печать на этой печатной пластине." + +msgid "Bed types supported by the printer." +msgstr "Типы столов, поддерживаемые принтером." msgid "Smooth Cool Plate" msgstr "Не нагреваемая гладкая пластина Bambu" -msgid "Engineering Plate" -msgstr "Инженерная пластина" - msgid "Smooth High Temp Plate" msgstr "Высокотемп. гладкая пластина" -msgid "Textured Cool Plate" -msgstr "Не нагреваемая текстур. пластина Bambu" +msgid "Default bed type" +msgstr "Стандартная печатающая пластина" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "" +"Стандартная печатающая пластина для принтера (поддерживается как числовой, " +"так и строковый формат)." msgid "First layer print sequence" msgstr "Последовательность печати первого слоя" @@ -9918,9 +11614,9 @@ msgid "The number of other layers print sequence" msgstr "Количество других слоёв при последовательной печати" msgid "Other layers filament sequence" -msgstr "Последовательность прутков на других слоях" +msgstr "Последовательность филамента на других слоях" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "" "Команды в G-коде, которые выполняются каждый раз перед сменой слоя, то есть " "перед поднятием оси Z." @@ -9931,7 +11627,7 @@ msgstr "Сплошных слоёв снизу" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Количество сплошных слоёв при печати нижней поверхности модели, включая " "нижний поверхностный слой. Если толщина, рассчитанная с помощью этого " @@ -9945,8 +11641,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Минимальная толщина оболочки снизу в мм. Если толщина оболочки, рассчитанная " "по количеству сплошных слоёв снизу, меньше этого значения, количество " @@ -9959,26 +11655,52 @@ msgstr "" msgid "Apply gap fill" msgstr "Заполнять щели" -# ??? Чет все сумбурно описано в анг. версии как-то msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Включает заполнение пробелов для выбранных поверхностей. Минимальной длиной " -"пробела, который будет заполнен, можно управлять с помощью нижерасположенной " -"опции «Игнорировать небольшие пробелы».\n" -"Доступные режимы:\n" -"1. Везде (заполнение пробелов применяется на верхних, нижних и внутренних " -"сплошных поверхностях)\n" -"2. Верхняя и нижняя поверхности (заполнение пробелов применяется только к " +"Включает заполнение щелей (пробелов) для выбранных сплошных поверхностей. " +"Минимальной длиной пробела, который будет заполнен, можно управлять с " +"помощью нижерасположенной опции «Игнорировать небольшие щели».\n" +"\n" +"Опции:\n" +"1. Везде (заполнение будет применяется к верхним, нижним и внутренним " +"сплошным поверхностях)\n" +"2. Верхняя и нижняя поверхности (заполнение будет применяется только к " "верхней и нижней поверхностям)\n" -"3. Нигде (заполнение пробелов отключено)\n" +"3. Нигде (заполнение будет отключено)\n" +"\n" +"Если хотите чтобы все заполнения щелей, в том числе сгенерированные " +"классическим генератором периметров, были удалены (т.е. не печатались), " +"установите высокое значение параметра «Игнорировать небольшие щели», " +"например, 999999.\n" +"\n" +"Однако это не рекомендуется, так как заполнение щелей между периметрами " +"делает модель прочнее. Если слишком много заполнений появляется между " +"периметрами, лучше переключиться на генератор периметров Arachne." msgid "Everywhere" msgstr "Везде" @@ -9989,75 +11711,160 @@ msgstr "Верхняя и нижняя поверхности" msgid "Nowhere" msgstr "Нигде" -msgid "Force cooling for overhang and bridge" -msgstr "Принудительный обдув навесов и мостов" +msgid "Force cooling for overhangs and bridges" +msgstr "Принудительный обдув нависаний и мостов" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Включите, чтобы оптимизировать скорость вентилятора охлаждения моделей для " -"нависаний и мостов для обеспечения лучшего их охлаждения." +"Включите, чтобы можно было настроить скорость вентилятора охлаждения моделей " +"для нависаний, внутренних и внешних мостов. Настройка скорости вентилятора " +"для этих элементов может повысить общее качество печати и снизить коробление " +"нависаний и мостов." -msgid "Fan speed for overhang" -msgstr "Скорость вентилятора на нависаниях" +msgid "Overhangs and external bridges fan speed" +msgstr "Скорость вентилятора для нависаний и внешних мостов" +# ???? Обратите внимание, эта скорость вентилятора не может быть ниже минимального значения, указанного в настройках выше. Если слой печатается слишком быстро (меньше минимального времени слоя), скорость вентилятора автоматически повысится до максимально допустимого значения. msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Заставляет вентилятор обдува модели работать на этой скорости при печати " -"мостов или нависающих периметров, имеющих большую степень свеса. " -"Принудительное охлаждение позволяет повысить качество печати этих частей." +"Данная настройка регулирует скорость вентилятора обдува модели только для " +"участков, где угол нависания превышает значение, заданное в параметре «Порог " +"включения обдува на нависаниях». Увеличение скорости вентилятора для таких " +"участков улучшает качество их печати.\n" +"\n" +"Обратите внимание: эта скорость не может быть ниже значения «Порог " +"минимальной скорости вентилятора», заданного выше. Если слой печатается " +"слишком быстро (меньше минимального времени слоя), скорость вентилятора " +"автоматически повысится до значения «Порог максимальной скорости " +"вентилятора»." -msgid "Cooling overhang threshold" -msgstr "Порог включения обдува на нависаниях" +msgid "Overhang cooling activation threshold" +msgstr "Порог нависания для включения обдува" -#, fuzzy, c-format +# ??? скорость вентилятора для нависающих элементов +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Принудительное включение вентилятора обдува модели на определенную скорость, " -"если степень нависания печатаемой части превышает данное значение. " -"Выражается в процентах и показывает, насколько велика ширина периметра без " -"поддержки со стороны нижнего слоя. 0% означает принудительное охлаждение " -"всего внешнего периметра независимо от степени нависания." +"Когда величина нависающего элемента превышает указанное пороговое значение, " +"принудительно включается вентилятор охлаждения модели со скоростью, " +"указанной ниже в параметре «Скорость вентилятора для нависаний и внешних " +"мостов». Значение указывается в процентах и показывает, какая часть ширины " +"линии не поддерживается слоем снизу. Если установить значение 0%, вентилятор " +"будет работать для всех внешних стенок, независимо от угла нависания." -msgid "Bridge infill direction" -msgstr "Угол печати мостов" +msgid "External bridge infill direction" +msgstr "Угол печати внешних мостов" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" -"Переопределение угла печати мостов. Если задано 0, угол печати мостов " -"рассчитывается автоматически. В противном случае заданный угол будет " -"использоваться для наружных мостов. Для нулевого угла установите 180°." +"Переопределение угла печати внутренних мостов. Если задано 0, угол печати " +"мостов рассчитывается автоматически. В противном случае будет использоваться " +"угол для внешних мостов. Для нулевого угла установите 180°." -msgid "Bridge density" -msgstr "Плотность мостов" +msgid "Internal bridge infill direction" +msgstr "Угол печати внутренних мостов" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Плотность наружных мостов. 100% - сплошной мост. По умолчанию задано 100%." +"Переопределение угла печати внутренних мостов. Если задано 0, угол печати " +"мостов рассчитывается автоматически. В противном случае будет использоваться " +"угол для внутренних мостов. Для нулевого угла установите 180°.\n" +"\n" +"Рекомендуется использовать значение 0, если для конкретной модели не " +"требуется какое-то иное значение." + +msgid "External bridge density" +msgstr "Плотность внешних мостов" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Этот параметр управляет плотностью (расстоянием между линиями) внешних " +"мостов. 100% означает сплошной мост. По умолчанию - 100%.\n" +"\n" +"Снижение плотности внешних мостов может повысить их надёжность, так как " +"увеличивается пространство для циркуляции воздуха вокруг напечатанных линий " +"моста, что улучшает его охлаждение." + +msgid "Internal bridge density" +msgstr "Плотность внутренних мостов" + +# ??? top surface pillowing +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Этот параметр управляет плотностью (расстоянием между линиями) внутренних " +"мостов. 100% означает сплошной мост. По умолчанию - 100%.\n" +"\n" +"Снижение плотности внутренних мостов может помочь уменьшить дефекты печати " +"верхней поверхности (например, эффекта «дырявой подушки») и повысить " +"надёжность внутренних мостов. Это достигается за счёт увеличения " +"пространства для циркуляции воздуха вокруг напечатанных линий, что ускоряет " +"их охлаждение.\n" +"\n" +"Эта настройка особенно эффективна в сочетании со вторым слоем внутреннего " +"моста над заполнением, что дополнительно улучшает структуру внутренних " +"мостов перед нанесением сплошного слоя." msgid "Bridge flow ratio" msgstr "Коэффициент потока мостов" # ???1 msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Параметр задаёт количество пластика, затрачиваемое для построения мостов. В " -"большинстве случаев настроек по умолчанию достаточно, тем не менее, при " -"печати некоторых моделей уменьшение параметра может сократить провисание " -"пластика при печати мостов." +"Немного уменьшите это значение (например, до 0,9), чтобы уменьшить " +"количество материала для моста и улучшить провисание.\n" +"\n" +"Фактический расход моста рассчитывается путем умножения этого значения на " +"коэффициент расхода филамента и, если он установлен, на коэффициент расхода " +"объекта." msgid "Internal bridge flow ratio" msgstr "Коэффициент потока внутреннего моста" @@ -10066,12 +11873,20 @@ msgstr "Коэффициент потока внутреннего моста" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" "Это значение определяет толщину слоя внутреннего моста, печатаемого поверх " "разреженного заполнения. Немного уменьшите это значение (например 0,9), " "чтобы улучшить качество поверхности печатаемой поверх разреженного " -"заполнения." +"заполнения.\n" +"\n" +"Фактический поток для внутреннего моста рассчитывается путем умножения " +"введенного здесь значения на коэффициент потока филамента, и если он задан, " +"на коэффициент потока модели." msgid "Top surface flow ratio" msgstr "Коэффициент потока на верхней поверхности" @@ -10079,46 +11894,158 @@ msgstr "Коэффициент потока на верхней поверхно # ???1 msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Этот параметр задаёт количество выдавливаемого материала для верхнего " "сплошного слоя заполнения. Вы можете немного уменьшить его, чтобы получить " -"более гладкую поверхность." +"более гладкую поверхность.\n" +"\n" +"Фактический поток для сплошного заполнения нижней поверхности рассчитывается " +"путем умножения введенного здесь значения на коэффициент потока филамента, и " +"если он задан, на коэффициент потока модели." msgid "Bottom surface flow ratio" msgstr "Коэффициент потока на нижней поверхности" -msgid "This factor affects the amount of material for bottom solid infill" +# ???1 +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Этот параметр задаёт количество выдавливаемого материала для нижнего " -"сплошного слоя заполнения." +"сплошного слоя заполнения.\n" +"\n" +"Фактический поток для сплошного заполнения нижней поверхности рассчитывается " +"путем умножения введенного здесь значения на коэффициент потока филамента, и " +"если он задан, на коэффициент потока модели." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Precise wall" -msgstr "Точные периметры" +msgstr "Точные стенки" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Повышение точности оболочки за счет регулировки расстояния между внешними " -"периметрами. Это также позволяет уменьшить расслоение слоёв.\n" -"Примечание: параметр будет действовать только в том случае, если " -"последовательность печати периметров задана «Внутренний/внешний»." +"Повысьте точность оболочки, отрегулировав расстояние между внешними " +"стенками. Это также улучшит однородность слоёв. ПРИМЕЧАНИЕ: Эта опция будет " +"игнорироваться для последовательностей стенок «внешняя-внутренняя» или " +"«внутренняя-внешняя-внутренняя»." msgid "Only one wall on top surfaces" -msgstr "Только один периметр на верхней поверхности" +msgstr "Только одна стенка на верхней поверхности" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" -"Печатать только один периметр на верхней поверхности, чтобы оставить больше " -"пространства для верхнего шаблона заполнения." +"На плоских верхних поверхностях используйте только одну стенку, чтобы " +"оставить больше места для верхнего шаблона заполнения." msgid "One wall threshold" -msgstr "Порог одного периметра" +msgstr "Порог одной стенки" #, no-c-format, no-boost-format msgid "" @@ -10134,21 +12061,21 @@ msgstr "" "Если должна быть напечатана верхняя поверхность и частично покрыта другим " "слоем, она не будет рассматриваться как верхний слой, ширина которого ниже " "этого значения. Это может быть полезно, чтобы не допустить срабатывания " -"функции «Только один периметр на верхней поверхности» на поверхности, " -"которая должна быть покрыта только периметрами. Это значение может быть " -"задано в мм или % от ширины экструзии периметра.\n" +"функции «Только одна стенка на верхней поверхности» на поверхности, которая " +"должна быть покрыта только периметрами. Это значение может быть задано в мм " +"или % от ширины экструзии периметра.\n" "Предупреждение: если этот параметр включён, то могут возникнуть дефекты, " "если у вас на следующем слое имеются какие-то тонкие элементы, например, " "буквы. Установите значение 0, чтобы избавиться от этих дефектов." msgid "Only one wall on first layer" -msgstr "Только один периметр на первом слое" +msgstr "Только одна стенка на первом слое" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" -"Печатать только один периметр на первом слое, чтобы оставить больше " +"Печатать только одну стенку на первом слое, чтобы оставить больше " "пространства для нижнего шаблона заполнения." msgid "Extra perimeters on overhangs" @@ -10156,36 +12083,37 @@ msgstr "Дополнительные периметры на нависания msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" "Создание дополнительных дорожек по периметру над крутыми нависаниями и " -"участками, где мосты не могут быть закреплены. " +"участками, где мосты не могут быть закреплены." -msgid "Reverse on odd" -msgstr "Реверс на нависаниях" +# ??? Реверс на чётных слоях нависаний +msgid "Reverse on even" +msgstr "Реверс на чётных слоях" msgid "Overhang reversal" msgstr "Реверс на нависаниях" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Печать нависающих периметров в обратном направлении на нечётных слоях. Такое " +"Печать нависающих периметров в обратном направлении на чётных слоях. Такое " "чередование может значительно улучшить качество печати крутых нависаний.\n" "\n" -"Эта настройка также может помочь уменьшить деформацию детали за счет " +"Эта настройка также может помочь уменьшить деформацию детали за счёт " "уменьшения напряжений в её стенках." msgid "Reverse only internal perimeters" msgstr "Реверс только для внутренних периметров" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10194,12 +12122,11 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Применяется логика реверса печати периметров только для внутренних " -"периметров.\n" +"Применяется логика реверса печати только для внутренних периметров.\n" "\n" "Эта настройка значительно снижает напряжения в деталях, поскольку теперь они " "распределяются в чередующихся направлениях. Это должно уменьшить деформацию " @@ -10210,8 +12137,8 @@ msgstr "" "\n" "Чтобы эта настройка была наиболее эффективной, рекомендуется установить " "параметр «Порог для реверса» равным 0, чтобы все внутренние периметры " -"печатались в чередующихся направлениях на нечётных слоях независимо от " -"степени их нависания." +"печатались в чередующихся направлениях на чётных слоях независимо от степени " +"их нависания." msgid "Bridge counterbore holes" msgstr "Мост для зенкованных отверстий" @@ -10219,13 +12146,14 @@ msgstr "Мост для зенкованных отверстий" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Эта опция создаёт мосты для отверстий с зенковкой, позволяя печатать их без " -"поддержки. \n" -"Доступные режимы:\n" +"поддержки.\n" +"\n" +"Опции:\n" "1. Нет (т.е. отключено)\n" "2. Частичный мост (мост будет построен только над частью неподдерживаемой " "области)\n" @@ -10241,58 +12169,98 @@ msgid "Reverse threshold" msgstr "Порог для реверса" msgid "Overhang reversal threshold" -msgstr "Порог разворота на свесах" +msgstr "Порог разворота на нависаниях" +# ????? #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Величина свеса периметра при которой она считается достаточной для активации " -"функции реверса печати нависаний.\n" -"Может быть задано как в процентах, так и в миллиметрах от ширины периметра." - -msgid "Classic mode" -msgstr "Классический режим" - -msgid "Enable this option to use classic mode" -msgstr "Включите эту опцию для использования классического режима." +"Величина нависания периметра при которой она считается достаточной для " +"активации функции реверса печати нависаний. Может быть задан в мм или в % от " +"ширины периметра.\n" +"При нуле разворот будет на каждом чётном слое, независимо от величина " +"нависания.\n" +"Если параметр «Обнаруживать нависающие периметры» не включен, этот параметр " +"игнорируется, и разворот происходит на каждом чётном слое без исключений." msgid "Slow down for overhang" msgstr "Замедляться на нависаниях" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "Включение динамического управления скоростью печати нависаний." msgid "Slow down for curled perimeters" msgstr "Замедляться на изогнутых периметрах" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Включите эту опцию для замедления печати в тех областях, где потенциально " -"могут возникать изогнутые периметры." +"Включите эту опцию для замедления печати в тех областях, где периметры могут " +"закручиваться вверх. Например, при печати нависаний на острых углах, таких " +"как передняя часть корпуса кораблика Benchy. Будет применено дополнительное " +"замедление, что уменьшит закручивание, которое накапливается за несколько " +"слоёв.\n" +"\n" +"Рекомендуется включать эту параметр, если система охлаждения вашего принтера " +"слабая или скорость печати слишком высокая. При печати внешнего периметра с " +"высокой скоростью, этот параметр может вызвать небольшие артефакты при " +"замедлении из-за большой вариативности в скоростях печати. Если вы заметите " +"артефакты, проверьте, правильно ли задан коэффициент Прогнозирования " +"расхода.\n" +"\n" +"Примечание: когда включено, нависающие периметры обрабатываются как " +"нависания, что означает что к ним будет применяться скорость печати " +"нависаний, даже если они является частью моста. Например, когда периметры " +"полностью нависают, не имея стенки, поддерживающей их снизу, будет " +"применяться 100%-ая скорость нависания." msgid "mm/s or %" msgstr "мм/с или %" -msgid "External" -msgstr "Внешние" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Скорость печати мостов и периметров с полным нависанием." - -msgid "mm/s" -msgstr "мм/с" +# ??? +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Скорость печати наружных периметров моста.\n" +"\n" +"Кроме того, если отключена опция «Замедляться на изогнутых периметрах» или " +"включён «Классический режим» печати нависаний, то скорость печати будет " +"какой же, что и для нависающих периметров, которые имеют поддержку менее " +"13%, независимо от того, являются ли они частью моста или нависания." msgid "Internal" msgstr "Внутренние" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" "Скорость печати внутреннего моста. Если задано в процентах, то значение " "вычисляться относительно скорости внешнего моста (bridge_speed). Значение по " @@ -10301,7 +12269,7 @@ msgstr "" msgid "Brim width" msgstr "Ширина каймы" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Расстояние от модели до внешней линии каймы." msgid "Brim type" @@ -10309,7 +12277,7 @@ msgstr "Тип каймы" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Этот параметр управляет формированием каймы на внешней/внутренней стороне " "моделей. Авто означает, что ширина каймы анализируется и рассчитывается " @@ -10320,7 +12288,7 @@ msgstr "Смещение каймы" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "Смещение каймы от печатаемой модели, может облегчить её удаление." msgid "Brim ears" @@ -10333,8 +12301,8 @@ msgid "Brim ear max angle" msgstr "Максимальный угол ушек каймы" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Максимальный угол, при котором печатается ушко каймы.\n" @@ -10345,30 +12313,45 @@ msgid "Brim ear detection radius" msgstr "Радиус обнаружения ушек каймы" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "Геометрия модели будет упрощена перед обнаружением острых углов. Этот " "параметр задаёт минимальную длину отклонения для её упрощения.\n" "Установите 0 для отключения." -msgid "Compatible machine" -msgstr "Совместимые принтеры" +msgid "Select printers" +msgstr "Выбор профиля принтера" msgid "upward compatible machine" msgstr "условия для совместимых принтеров" -msgid "Compatible machine condition" -msgstr "Состояние совместимой машины" +msgid "Condition" +msgstr "Условия совместимости" -msgid "Compatible process profiles" -msgstr "Совместимые профили процессов" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Логическое выражение, использующее значения конфигурации активного профиля " +"принтера. Если это выражение истинно, этот профиль считается совместимым с " +"активным профилем принтера." -msgid "Compatible process profiles condition" -msgstr "Состояние совместимых профилей процессов" +msgid "Select profiles" +msgstr "Выбор профиля процесса" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Логическое выражение, использующее значения конфигурации активного профиля " +"печати. ​​Если это выражение истинно, этот профиль считается совместимым с " +"активным профилем печати." + +msgid "Print sequence, layer by layer or object by object." msgstr "Выбор последовательности печати моделей - одновременно или по очереди." msgid "By layer" @@ -10381,7 +12364,7 @@ msgstr "По очереди" msgid "Intra-layer order" msgstr "Порядок печати слоёв" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "Последовательность печати слоёв в пределах одного слоя." msgid "As object list" @@ -10394,36 +12377,32 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Включите эту опцию для разрешения замедления скорости печати в зависимости " "от времени печати слоя, чтобы слой мог охлаждаться дольше. Это позволяет " "улучшить качество охлаждения острых концов и мелких деталей." msgid "Normal printing" -msgstr "Ускорение по умолчанию" +msgstr "Ускорение печати по умолчанию" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Ускорение по умолчанию для обычной печати и перемещения, кроме первого слоя." -msgid "mm/s²" -msgstr "мм/с²" - msgid "Default filament profile" -msgstr "Профиль прутка по умолчанию" +msgstr "Профиль филамента по умолчанию" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "" -"Профиль пластиковой нити по умолчанию при переключении на этот профиль " -"принтера." +"Профиль филамента по умолчанию при переключении на этот профиль принтера." msgid "Default process profile" msgstr "Профиль процесса по умолчанию" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "" "Профиль процесса по умолчанию при переключении на этот профиль принтера." @@ -10439,21 +12418,21 @@ msgid "Fan speed" msgstr "Скорость вентилятора" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Скорость вытяжного вентилятора во время печати. Эта скорость переопределяет " -"скорость в пользовательском G-коде прутка." +"скорость в пользовательском G-коде филамента." -msgid "Speed of exhaust fan after printing completes" -msgstr "Скорость вытяжного вентилятора после завершения печати" +msgid "Speed of exhaust fan after printing completes." +msgstr "Скорость вытяжного вентилятора после завершения печати." msgid "No cooling for the first" msgstr "Не включать вентилятор на первых" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Количество слоёв, начиная с первого, на которых всем вентиляторам запрещено " "включаться, чтобы не ухудшить адгезию к столу." @@ -10462,14 +12441,14 @@ msgid "Don't support bridges" msgstr "Не печатать поддержки под мостами" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Опция, препятствующая печати поддержки под мостами. Мост обычно можно " "печатать без поддержки, если он не очень длинный." -msgid "Thick bridges" -msgstr "Толстые мосты" +msgid "Thick external bridges" +msgstr "Толстые внешние мосты" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10492,66 +12471,138 @@ msgstr "" "рекомендуется включить эту функцию. Однако при использовании сопел больших " "диаметров рекомендуется отключить эту опцию." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Не отфильтровать небольшие внутренние мосты (beta)" +msgid "Extra bridge layers (beta)" +msgstr "Дополнительный слой для мостов (beta)" +# ??? Внутренние мосты учитываются в подсчёте слоёв верхней оболочки модели. msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" +"Эта опция включает создание дополнительного слоя моста над внутренними и/или " +"внешними мостами.\n" +"\n" +"Дополнительный слой улучшает внешний вид и надёжность мостов, что, в свою " +"очередь, улучшает качество печати последующего сплошного заполнения. Это " +"особенно полезно для быстрых принтеров, где скорости печати мостов и " +"сплошного заполнения значительно различаются. Также это уменьшает " +"вероятность возникновения такого дефекта, как эффект «дырявой подушки» на " +"верхних поверхностях, и снижает риск отслоения внешнего моста от " +"периметров.\n" +"\n" +"Рекомендуется установить значение хотя бы на «Для внешних мостов», если нет " +"специфических проблем с моделью.\n" +"\n" +"Опции:\n" +"1. Отключено - дополнительный слой не генерируется. Это значение установлено " +"по умолчанию для обеспечения совместимости.\n" +"2. Для внешних мостов - дополнительный слой добавляется только для внешних " +"мостов. Обратите внимание, что небольшие мосты, которые короче или уже " +"установленного вами количества периметров, будут пропущены, так как второй " +"слой для них не принесёт пользы. Второй слой будет экструдирован параллельно " +"первому слою моста для усиления прочности.\n" +"3. Для внутренних мостов - дополнительный слой добавляется только для " +"внутренних мостов над разреженным заполнением. Обратите внимание, что " +"внутренние мосты учитываются в общем количестве верхних слоёв модели. Второй " +"слой будет экструдирован максимально перпендикулярно первому. Если в " +"изолированной области слоя есть мосты, направленные под разными углами, в " +"качестве ориентира будет выбран угол последней области.\n" +"4. Для всех мостов - дополнительный слой генерируется как для внутренних, " +"так и для внешних мостов.\n" + +msgid "Disabled" +msgstr "Отключено" + +msgid "External bridge only" +msgstr "Для внешних мостов" + +msgid "Internal bridge only" +msgstr "Для внутренних мостов" + +msgid "Apply to all" +msgstr "Для всех мостов" + +msgid "Filter out small internal bridges" +msgstr "Отфильтровать небольшие внутренние мосты (beta)" + +# ???? +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" "By default, small internal bridges are filtered out and the internal solid " "infill is printed directly over the sparse infill. This works well in most " "cases, speeding up printing without too much compromise on top surface " -"quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" -"\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" "Эта опция может помочь уменьшить образование эффекта «дырявой подушки» на " -"верхних сильно наклонных поверхностях или изогнутых моделях.\n" +"верхних сильно наклонных поверхностях или изогнутых моделях\n" "\n" -"По умолчанию, маленькие внутренние мосты фильтруются и внутреннее сплошное " -"заполнение печатается непосредственно поверх разреженного заполнения. В " -"большинстве случаев это хорошо работает, ускоряя печать без особого ущерба " -"для качества верхней поверхности. Однако, на сильно наклонных поверхностях " -"или изогнутых моделях, особенно при низкой плотности заполнения, это может " -"привести к скручиванию неподдерживаемого сплошного заполнения и образованию " -"эффекта «дырявой подушки».\n" +"По умолчанию, маленькие внутренние мосты отфильтровываются, а внутреннее " +"сплошное заполнение печатается непосредственно поверх разреженного " +"заполнения. В большинстве случаев это хорошо работает, ускоряя печать без " +"особого ущерба для качества верхней поверхности. Однако, на сильно наклонных " +"поверхностях или изогнутых моделях, особенно при низкой плотности " +"заполнения, это может привести к скручиванию неподдерживаемого сплошного " +"заполнения и образованию эффекта «дырявой подушки»\n" "\n" -"Включение позволит печатать слой внутреннего моста над слабо поддерживаемым " +"Отключение позволит печатать слой внутреннего моста над слабо поддерживаемым " "внутренним сплошным заполнением. Приведённые ниже параметры управляют " -"степенью фильтрации, т.е. количеством создаваемых внутренних мостов.\n" +"степенью фильтрации, т.е. количеством создаваемых внутренних мостов.n\n" "\n" -"Отключение - отключает эту опцию. Это задано по умолчанию и в большинстве " -"случаев работает хорошо.\n" +"Фильтрация включена по умолчанию и хорошо работает в большинстве случаев\n" "\n" "Ограниченная фильтрация - создаёт внутренние мосты на сильно наклонных " "поверхностях, при этом избегая создания ненужных внутренних мостов. Это " -"хорошо работает на большинстве сложных моделях.\n" +"хорошо работает на большинстве сложных моделях.n\n" "\n" "Без фильтрации - мосты создаются над каждым потенциально внутреннем " "нависании. Этот вариант полезен для моделей с сильно наклонной верхней " "поверхностью. Однако в большинстве случаев этот вариант создаёт слишком " -"много ненужных мостов." - -msgid "Disabled" -msgstr "Отключено" +"много ненужных мостов" msgid "Limited filtering" msgstr "Ограниченная фильтрация" @@ -10574,27 +12625,28 @@ msgstr "" msgid "End G-code" msgstr "Завершающий G-код" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Команды в G-коде, которые выполняются в самом конце печати." -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "G-код между моделями" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Команды в G-коде, которые выполняются каждый раз перед сменой модели. " "Действует только при печати моделей «По очереди»." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "" "Команды в G-коде, которые выполняются при окончании печатью этой пластиковой " "нитью." msgid "Ensure vertical shell thickness" -msgstr "Обеспечивать верт. толщину оболочки" +msgstr "Сохранение толщины вертикальной оболочки" +# было Везде, но из-за условия совместимости изменено.... как тогда быть? msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)\n" @@ -10605,17 +12657,17 @@ msgid "" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" -"Добавление сплошного заполнения вблизи наклонных поверхностей для " -"обеспечения вертикальной толщины оболочки (верхний+нижний сплошные слои).\n" +"Добавление сплошного концентрического заполнения вблизи наклонных " +"поверхностей для того чтобы гарантировать заданную толщину оболочки.\n" "\n" "Нет - сплошное заполнение нигде не будет добавляться. Внимание: если ваша " "модель имеет наклонные поверхности, подумайте стоит ли выбирать эту опцию.\n" "Только критические - избегать добавления сплошного заполнения для стен.\n" "Умеренное - добавление сплошного заполнения только для сильно наклонных " "поверхностей.\n" -"Везде - добавление сплошного заполнения для всех подходящих наклонных " -"поверхностей.\n" -"Значение по умолчанию - Везде." +"Все, т.е. везде - добавление сплошного заполнения для всех подходящих " +"наклонных поверхностей.\n" +"Значение по умолчанию - Все." msgid "Critical Only" msgstr "Только критические" @@ -10626,23 +12678,23 @@ msgstr "Умеренное" msgid "Top surface pattern" msgstr "Шаблон заполнения верхней поверхности" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Шаблон заполнения верхней поверхности." -msgid "Concentric" -msgstr "Концентрический" - -msgid "Rectilinear" -msgstr "Прямолинейный" - msgid "Monotonic" msgstr "Монотонный" msgid "Monotonic line" msgstr "Монотонная линия" +msgid "Rectilinear" +msgstr "Прямолинейный" + msgid "Aligned Rectilinear" -msgstr "Выровн. прямолинейн." +msgstr "Выровненный прямолинейно" + +msgid "Concentric" +msgstr "Концентрический" msgid "Hilbert Curve" msgstr "Кривая Гильберта" @@ -10656,7 +12708,7 @@ msgstr "Спиральная октаграмма" msgid "Bottom surface pattern" msgstr "Шаблон заполнения нижней поверхности" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "Шаблон заполнения нижней поверхности, кроме мостов." msgid "Internal solid infill pattern" @@ -10674,15 +12726,15 @@ msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -"Ширина экструзии для внешнего периметра. Если задано в процентах, то " -"значение вычисляться относительно диаметра сопла." +"Ширина экструзии для внешней стенки. Если задано в процентах, то значение " +"вычисляется относительно диаметра сопла." msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"Скорость печати внешнего периметра (видимого). Для улучшения качества, эту " -"скорость делают ниже скорости внутренних периметров." +"Скорость внешней стенки, которая находится дальше всего и видна. Раньше она " +"была ниже скорости внутренней стены для лучшего качества." msgid "Small perimeters" msgstr "Маленькие периметры" @@ -10693,27 +12745,27 @@ msgid "" "example: 80%) it will be calculated on the outer wall speed setting above. " "Set to zero for auto." msgstr "" -"Этот параметр влияет на скорость печати периметров, имеющих радиус <= " -"значению порога маленьких периметров (обычно это отверстия). Если задано в " -"процентах, параметр вычисляется относительно скорости печати внешнего " -"периметра указанного выше. Установите 0 для автонастройки." +"Этот параметр влияет на скорость печати периметров, имеющих радиус примерно " +"равный значению порога маленьких периметров (обычно это отверстия). Если " +"задано в процентах, параметр вычисляется относительно скорости печати " +"внешнего периметра указанного выше. Установите 0 для автонастройки." msgid "Small perimeters threshold" msgstr "Порог маленьких периметров" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Пороговое значение длины маленьких периметров. Значение по умолчанию - 0 мм." msgid "Walls printing order" -msgstr "Порядок печати периметров" +msgstr "Порядок печати стенок" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10723,17 +12775,15 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Последовательность печати внутреннего/внешнего периметров.\n" +"Последовательность печати внутренних и внешних стенок\n" "\n" "Используйте порядок печати периметров «Внутренний/Внешний» для получения " "наилучших нависаний. Однако этот вариант приводит к небольшому снижению " @@ -10747,15 +12797,13 @@ msgstr "" "требуется минимум 3 периметра, так как сначала печатаются внутренние " "периметры, начиная с 3-го периметра, затем внешний периметр и, наконец, " "первый внутренний периметр. В большинстве случаев этот вариант рекомендуется " -"использовать вместо варианта «Внешний/Внутренний». \n" +"использовать вместо варианта «Внешний/Внутренний».\n" "\n" "Используйте порядок печати периметров «Внешний/Внутренний», чтобы получить " "то же качество внешних периметров и точность размеров, что и при " "использовании варианта «Внутренний/Внешний/Внутренний». Однако, поскольку " "первая экструзия нового слоя начинается на видимой поверхности, швы по оси Z " -"будут выглядеть менее равномерными.\n" -"\n" -" " +"будут выглядеть менее равномерными." msgid "Inner/Outer" msgstr "Внутренний/Внешний" @@ -10774,43 +12822,42 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" -"Последовательность печати периметров/заполнения. Когда отключено, сначала " -"печатаются периметры, что в большинстве случаев работает лучше всего.\n" +"Последовательность печати стенок/заполнения. Когда функция отключена, " +"сначала печатаются стенки, что в большинстве случаев работает лучше всего.\n" "\n" "Печать заполнения первым может помочь при экстремальных нависаниях, " -"поскольку периметры будут прилегать к соседнему заполнению. Однако в этом " +"поскольку стенки будут прилегать к соседнему заполнению. Однако в этом " "случае последующее заполнение будет слегка выдавливать напечатанные " "периметры в местах примыкания к ним, что приводит к ухудшению качества " "внешней поверхности. Кроме того, это может приводить к тому, что заполнение " "будет просвечиваться через внешнюю поверхность детали." msgid "Wall loop direction" -msgstr "Направление петель периметров" +msgstr "Направление петель стенок" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"Направление, в котором выдавливаются петли периметров при взгляде сверху " +"Направление, в котором выдавливаются контуры стенок при взгляде сверху " "вниз.\n" "\n" -"По умолчанию все периметры выдавливаются против часовой стрелки, если не " -"включена опция «Реверс на нависаниях». При установке этого параметра в " -"значение, отличное от автоматического, направление периметров будет " -"задаваться независимо от опция «Реверс на нависаниях».\n" +"По умолчанию все стенки печатаются против часовой стрелки, если не включён " +"режим реверса печати. Любое значение, отличное от «Авто», приведёт к " +"принудительному направлению стенок независимо от режима обратной печати.\n" "\n" -"Эта опция будет отключена, если включен режим спиральной вазы." +"Этот параметр будет отключен, если включён режим «спиральной вазы»." msgid "Counter clockwise" msgstr "Против часовой стрелки" @@ -10907,7 +12954,7 @@ msgid "" "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" "Этот параметр задаёт расстояние между точками зондирования (размер сетки) в " -"направлениях XY. По умолчанию оно равно 50 мм как для X, так и для Y." +"направлениях X и Y. По умолчанию оно равно 50 мм как для X, так и для Y." msgid "Mesh margin" msgstr "Граница сетки" @@ -10919,47 +12966,210 @@ msgstr "" "Этот параметр определяет дополнительное расстояние, на которое должна быть " "расширена адаптивная сетка стола в направлениях XY." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Цвет экструдера" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "" "Используется только в качестве визуальной помощи в пользовательском " -"интерфейсе" +"интерфейсе." -# ??? Смещение экструдера по осям X/Y msgid "Extruder offset" msgstr "Смещение координат экструдера" msgid "Flow ratio" -msgstr "Коэффициент потока модели" +msgstr "Коэф. потока модели" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Коэффициент пропорционального изменения величины потока подаваемого " "пластика. Рекомендуемый диапазон значений от 0,95 до 1,05.\n" "При небольшом переливе или недоливе на поверхности, корректировка этого " "параметра поможет получить хорошую гладкую поверхность." +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Коэффициент пропорционального изменения величины потока подаваемого " +"пластика. Рекомендуемый диапазон значений от 0,95 до 1,05.\n" +"При небольшом переливе или недоливе на поверхности, корректировка этого " +"параметра поможет получить хорошую гладкую поверхность.\n" +"\n" +"Фактический поток модели рассчитывается путем умножения введенного здесь " +"значения на коэффициент потока филамента." + msgid "Enable pressure advance" -msgstr "Включить Pressure advance" +msgstr "Включить прогнозирование расхода" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Включить Pressure advance (прогнозирование давления). Результат " -"автокалибровки будет перезаписан после включения." +"Включить прогнозирование расхода. Результат автокалибровки будет перезаписан " +"после включения." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Pressure advance (прогнозирование давления) в прошивки Klipper, это одно и " -"тоже что Linear advance в прошивке Marlin." +"Прогнозирование расхода (Pressure advance) в прошивке Klipper, это одно и " +"тоже что Linear advance factor в прошивке Marlin." + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Включить адаптивное прогнозирование расхода (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Было замечено, что с увеличением скорости печати (а следовательно, " +"увеличением потока через сопло) и увеличением ускорений, эффективное " +"значение прогнозирования расхода уменьшается. Это означает, что одинаковое " +"значение коэффициента прогнозирования расхода не всегда на 100% оптимально " +"для всех элементов, и обычно используется компромиссное значение, которое не " +"вызывает слишком сильных выпуклостей на элементах с более низкой скоростью " +"потока и ускорениями, а также не вызывает пробелов на более быстрых " +"элементах.\n" +"\n" +"Данная функция призвана устранить это ограничение путем моделирования " +"реакции экструзионной системы вашего принтера в зависимости от объёмной " +"скорости потока и ускорения, с которыми происходит печать. Внутри системы " +"генерируется модель, которая позволяет экстраполировать необходимое значение " +"прогнозирования расхода для любой заданной объёмной скорости потока и " +"ускорения, которое затем подаётся на принтер в зависимости от текущих " +"условий печати.\n" +"\n" +"Если включено, указанное выше значение прогнозирования расхода " +"переопределяется. Однако настоятельно рекомендуется использовать разумное " +"значение по умолчанию, указанное выше, в качестве запасного варианта и при " +"смене инструмента.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Измеренные значения адаптивного прогнозирования расхода (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Впишите через запятую наборы значений прогнозирования расхода, объёмных " +"скоростей потока (далее просто поток) и ускорений, при которых они были " +"измерены. По одному набору значений в строке. Например:\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Как выполнить калибровку:\n" +"1. Проведите тест прогнозируемого расхода не менее чем на трёх скоростях для " +"каждого значения ускорения. Рекомендуется выполнить тест как минимум для " +"скорости внешних периметров, скорости внутренних периметров и самой высокой " +"скорости печати элементов в вашем профиле (обычно это разреженное или " +"сплошное заполнение)\n" +"Затем выполните тесты для тех же скоростей при самых медленных и самых " +"быстрых ускорениях печати, но не быстрее рекомендуемого максимального " +"ускорения, указанного в конфиге Klipper-а\n" +"2. Запишите оптимальное значение прогнозируемого расхода для потока и " +"ускорения. Значение потока можно увидеть, выбрав «Поток» в раскрывающемся " +"меню цветовой схемы. Значение потока будет отображаться внизу на экране " +"предпросмотра нарезки. Идеальное значение прогнозируемого расхрда должно " +"уменьшаться с увеличением объёмного потока. Если это не так, убедитесь, что " +"ваш экструдер функционирует правильно. Чем медленнее и с меньшим ускорением " +"вы печатаете, тем больше диапазон допустимых значений прогнозируемого " +"расхода. Если разница не видна, используйте значение прогнозируемого расхода " +"из более быстрого теста\n" +"3. Введите в текстовое поле здесь через запятую три значения - коэффициент " +"прогнозируемого расхода, значения потока и ускорения. Впишите столько " +"наборов значений сколько считаете нужным и сохраните профиль филамента" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Включить адаптивный прогнозируемый расход на нависаниях (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Включить адаптивное прогнозируемого расхода на нависаниях, а также при " +"изменении потока в пределах одного и того же элемента. Это экспериментальная " +"опция, так как неточное заданное значение прогнозируемого расхода может " +"привести к проблемам с однородностью на внешних поверхностях до и после " +"нависаний.\n" + +msgid "Pressure advance for bridges" +msgstr "Коэф. прогнозируемого расхода для мостов" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Коэффициент прогнозируемого расхода для мостов. Установите значение 0, если " +"хотите отключить функцию.\n" +"\n" +"Более низкое значение прогнозируемого расхода при печати мостов помогает " +"уменьшить появление небольшой недоэкструзии сразу после мостов. Это вызвано " +"падением давления в сопле при печати в воздухе, и более низкое значение " +"прогнозируемого расхода помогает предотвратить это." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " @@ -10973,38 +13183,35 @@ msgid "Keep fan always on" msgstr "Вентилятор включён всегда" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Если включено, вентилятор охлаждения модели никогда не будет останавливаться " "и будет работать на минимальной скорости, чтобы сократить частоту его " "запуска и остановки." msgid "Don't slow down outer walls" -msgstr "Не замедляться на внешнем периметре" +msgstr "Не замедляться на внешних стенках" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "Если включено, то скорость печати внешних периметров не будет снижаться, " "чтобы уложиться в минимальное время печати слоя. Это особенно полезно при " "следующих сценариях:\n" -"\n" -"1. Чтобы при печати глянцевыми материалами избежать изменения блеска \n" +"1. Чтобы при печати глянцевыми материалами избежать изменения блеска\n" "2. Чтобы избежать появления небольших дефектов, которые возникают при " -"изменении скорости и выглядят как горизонтальные полосы \n" -"3. Чтобы избежать печати на скоростях, при которых на внешних периметрах " -"возникают вертикальные артефакты (VFA)\n" -"\n" +"изменении скорости и выглядят как горизонтальные полосы\n" +"3. Чтобы избежать печати на скоростях, при которых на внешних стенках " +"возникают вертикальные артефакты (VFA)" msgid "Layer time" msgstr "Время слоя" @@ -11012,7 +13219,7 @@ msgstr "Время слоя" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Вентилятор охлаждения моделей будет включён для слоёв, расчётное время " "которых меньше этого значения. Скорость вентилятора интерполируется между " @@ -11022,14 +13229,19 @@ msgstr "" msgid "Default color" msgstr "Цвет по умолчанию" -msgid "Default filament color" -msgstr "Цвет пластиковой нити по умолчанию" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Цвет филамента по умолчанию.\n" +"Щелкните правой кнопкой мыши, чтобы сбросить значение до системного значения " +"по умолчанию." msgid "Filament notes" -msgstr "Примечание о прутке" +msgstr "Примечание к филаменту" msgid "You can put your notes regarding the filament here." -msgstr "Здесь вы можете написать свои заметки для текущей пластиковой нити." +msgstr "Здесь вы можете написать свои заметки к текущему филаменту." msgid "Required nozzle HRC" msgstr "Необходимая твёрдость сопла" @@ -11041,46 +13253,113 @@ msgstr "" "Минимальная твёрдость материала сопла (HRC), необходимая для печати " "пластиковой нитью. 0 - отключение контроля сопел на твёрдость." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Этот параметр определяет, какой объём материала может быть расплавлен и " "выдавлен в секунду. Скорость печати ограничена максимальным объёмным " "расходом в случае слишком высокой и необоснованной установки скорости. " "Параметр не может быть нулевым." -msgid "mm³/s" -msgstr "мм³/с" - msgid "Filament load time" -msgstr "Время загрузки прутка" - -msgid "Time to load new filament when switch filament. For statistics only" -msgstr "" -"Время загрузки новой пластиковой нити при её смене. Только для статистики." - -msgid "Filament unload time" -msgstr "Время выгрузки прутка" - -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "" -"Время выгрузки старой пластиковой нити при её смене. Только для статистики." +msgstr "Время загрузки филамента" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Диаметр пластиковой нити используется для расчёта экструзии, поэтому он " -"важен и должен быть точным" +"Время загрузки нового филамента при его смене. Применяется для " +"одноэкструдерных мульти-филаментных принтеров. Для принтеров со сменой " +"инструмента или многоинструментальных принтеров оно обычно равно 0. " +"Используется только для статистики." + +msgid "Filament unload time" +msgstr "Время выгрузки филамента" + +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"Время выгрузки старого филамента при его смене. Применяется для " +"одноэкструдерных мульти-филаментных принтеров. Для принтеров со сменой " +"инструмента или многоинструментальных принтеров оно обычно равно 0. " +"Используется только для статистики." + +msgid "Tool change time" +msgstr "Время смены инструмента" + +msgid "" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Время, необходимое для смены экструдера. Обычно применимо к устройствам со " +"сменными экструдерами или мульти-филаментным принтерам. Для мульти-" +"филаментых принтеров с одним экструдером оно обычно равно 0. Используется " +"только для статистики." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"Диаметр филамента используется для расчёта экструзии в G-коде, поэтому он " +"важен и должен быть точно задан." msgid "Pellet flow coefficient" msgstr "Коэф. потока гранул" -# ??????? PI это π? msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -11091,50 +13370,79 @@ msgstr "" "Коэффициент потока гранул определяется эмпирическим путем и позволяет " "рассчитать объём для гранульных принтеров.\n" "\n" -"Внутри коэффициент преобразуется в диаметр прутка ('filament_diameter'). Все " -"остальные расчёты объёма остаются прежними.\n" +"Внутри коэффициент преобразуется в диаметр прутка филамента " +"('filament_diameter'). Все остальные расчёты объёма остаются прежними.\n" "\n" -"диаметр прутка = √( (4 * коэф. потока гранул) / π )" +"диаметр прутка филамента = √( (4 * коэф. потока гранул) / π )" -msgid "Shrinkage" -msgstr "Усадка материала" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Компенсация усадки по XY" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" -"Введите процент усадки пластиковой нити, которую получит она после " -"охлаждения (пишите 94%, если вы намерили 94 мм, вместо 100 мм). Для " -"компенсации усадки деталь будет отмасштабированна по оси XY. При этом " -"учитывается только пластиковая нить, используемая для печати внешнего " -"периметра.\n" -"Убедитесь, что между моделями достаточно места, так как эта компенсация " -"выполняется после проверок." +"Введите процент усадки филамента после охлаждения (94%, если измерено 94 мм " +"вместо 100 мм). Деталь будет масштабирована по осям XY для компенсации. " +"Учитывается только филамент, использованный для периметра.\n" +"Убедитесь, что между объектами достаточно свободного пространства, так как " +"эта компенсация выполняется после проверки." + +msgid "Shrinkage (Z)" +msgstr "Компенсация усадки по Z" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Введите процент усадки филамента после охлаждения (94%, если измерено 94 мм " +"вместо 100 мм). Для компенсации усадки деталь будет отмасштабирована по оси " +"Z." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" msgstr "Скорость загрузки" msgid "Speed used for loading the filament on the wipe tower." -msgstr "Скорость загрузки прутка при печати черновой башни." +msgstr "Скорость загрузки филамента при печати черновой башни." msgid "Loading speed at the start" msgstr "Начальная скорость загрузки" msgid "Speed used at the very beginning of loading phase." -msgstr "Скорость в начальной фазе загрузки прутка." +msgstr "Скорость в начальной фазе загрузки филамента." msgid "Unloading speed" msgstr "Скорость выгрузки" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"Скорость выгрузки прутка на черновую башню. (не влияет на начальную фазу " +"Скорость выгрузки филамент на черновую башню (не влияет на начальную фазу " "выгрузки сразу после рэмминга)." msgid "Unloading speed at the start" @@ -11142,19 +13450,19 @@ msgstr "Начальная скорость выгрузки" msgid "" "Speed used for unloading the tip of the filament immediately after ramming." -msgstr "Скорость выгрузки кончика прутка сразу после рэмминга." +msgstr "Скорость выгрузки кончика прутка филамента сразу после рэмминга." msgid "Delay after unloading" msgstr "Задержка после выгрузки" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" -"Время ожидания после выгрузки прутка. Это может помочь вам легко сменить " -"сопло при печати гибкими материалами, которым требуется больше времени, " -"чтобы вернуться к своим первоначальным размерам." +"Время ожидания после извлечения филамента. Может помочь обеспечить надёжную " +"смену материала при работе с гибкими материалами, которым может " +"потребоваться больше времени для усадки до исходных размеров." msgid "Number of cooling moves" msgstr "Количество охлаждающих движений" @@ -11163,9 +13471,29 @@ msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"Пруток охлаждается в охлаждающих трубках путём перемещения назад и вперёд. " +"Филамент охлаждается в охлаждающей трубке путём перемещения назад и вперёд. " "Укажите желаемое количество таких движений." +msgid "Stamping loading speed" +msgstr "Скорость загрузки при утрамбовке" + +msgid "Speed used for stamping." +msgstr "Скорость, используемая для утрамбовки." + +# длинно Расстояние от места формования конца, измеренное от центра охлаждающей трубки +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Расстояние утрамбовки" + +# ??? +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Если задано ненулевое значение, филамент будет перемещается к соплу между " +"отдельными охлаждающими движениями - утрамбовкой. Эта опция определяет длину " +"это движения, прежде чем филамент снова будет подвержен ретракту." + msgid "Speed of the first cooling move" msgstr "Скорость первого охлаждающего движения" @@ -11182,12 +13510,12 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"После смены инструмента, точное положение вновь загруженного прутка внутри " -"него может быть неизвестно, и давление прутка, вероятно, ещё не стабильно. " -"Перед тем, как очистить печатающую головку в заполнение или в «жертвенную» " -"модель Snapmaker Orca всегда будет выдавливать это количество материала на " -"черновую башню, чтобы обеспечить надёжную печать заполнения или «жертвенной» " -"модели." +"После смены инструмента, точное положение вновь загруженного филамента " +"внутри него может быть неизвестно, и давление прутка, вероятно, ещё не " +"стабильно. Перед тем, как очистить печатающую головку в заполнение или в " +"«жертвенную» модель Snapmaker Orca всегда будет выдавливать это количество " +"материала на черновую башню, чтобы обеспечить надёжную печать заполнения или " +"«жертвенной» модели." msgid "Speed of the last cooling move" msgstr "Скорость последнего охлаждающего движения" @@ -11195,16 +13523,6 @@ msgstr "Скорость последнего охлаждающего движ msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Охлаждающие движения постепенно ускоряют до этой скорости." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Время за которое прошивка принтера (или Multi Material Unit 2.0) выгружает " -"пруток во время смены инструмента (при выполнении кода Т). Это время " -"добавляется к общему времени печати с помощью алгоритма оценки времени " -"выполнения G-кода." - msgid "Ramming parameters" msgstr "Параметры рэмминга" @@ -11215,24 +13533,14 @@ msgstr "" "Эта строка редактируется диалоговым окном рэмминга и содержит его конкретные " "параметры." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Время за которое прошивка принтера (или Multi Material Unit 2.0) выгружает " -"пруток во время смены инструмента (при выполнении кода Т). Это время " -"добавляется к общему времени печати с помощью алгоритма оценки времени " -"выполнения G-кода." - -msgid "Enable ramming for multitool setups" -msgstr "Включить рэмминг для мультиинструментальных устройств" +msgid "Enable ramming for multi-tool setups" +msgstr "Включить рэмминг для многоинструментального принтера" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Выполнять рэмминг при использовании многоинструментального принтера (т. е. " "когда в настройках принтера снят флажок «Одноэкструдерный ММ принтер»). При " @@ -11240,57 +13548,66 @@ msgstr "" "черновую башню непосредственно перед сменой инструмента. Эта опция " "используется только в том случае, если включена черновая башня." -msgid "Multitool ramming volume" -msgstr "Объём рэмминга мультиинструмента" +msgid "Multi-tool ramming volume" +msgstr "Объём рэмминга многоинструментального принтера" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Объём рэмминга перед сменой инструмента." -msgid "Multitool ramming flow" -msgstr "Поток рэмминга мультиинструмента" +msgid "Multi-tool ramming flow" +msgstr "Поток рэмминга многоинструментального принтера" -msgid "Flow used for ramming the filament before the toolchange." -msgstr "Поток рэмминга пластиковой нити перед сменой инструмента." +msgid "Flow used for ramming the filament before the tool change." +msgstr "Поток рэмминга филамента перед сменой печатающей головки." msgid "Density" msgstr "Плотность" -msgid "Filament density. For statistics only" -msgstr "" -"Плотность пластиковой нити. Это необходимо только для отображения " -"статистической информации." +msgid "Filament density. For statistics only." +msgstr "Плотность филамента. Используется только для статистики." -msgid "g/cm³" -msgstr "г/см³" - -msgid "The material type of filament" -msgstr "Тип материала пластиковой нити." +msgid "The material type of filament." +msgstr "Тип материала филамента." msgid "Soluble material" msgstr "Растворимый материал" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Растворимый материал обычно используется для печати поддержки и связующего " "слоя поддержки." +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Поддержка" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" -"«Материал для поддержки» обычно используется для печати поддержки и " +"Материал для поддержки» обычно используется для печати поддержки и " "связующего слоя поддержки." +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Температура размягчения" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "При этой температуре материал размягчается, поэтому, когда температура стола " "равна или превышает её, настоятельно рекомендуется открыть переднюю дверцу и/" @@ -11299,10 +13616,8 @@ msgstr "" msgid "Price" msgstr "Стоимость" -msgid "Filament price. For statistics only" -msgstr "" -"Стоимость пластиковой нити. Это необходимо только для отображения " -"статистической информации." +msgid "Filament price. For statistics only." +msgstr "Стоимость филамента. Используется только для статистики." msgid "money/kg" msgstr "цена/кг" @@ -11310,10 +13625,8 @@ msgstr "цена/кг" msgid "Vendor" msgstr "Производитель" -msgid "Vendor of filament. For show only" -msgstr "" -"Производитель пластиковой нити. Это необходимо только для отображения " -"статистической информации." +msgid "Vendor of filament. For show only." +msgstr "Производитель филамента. Это необходимо только для статистики." msgid "(Undefined)" msgstr "(Не указано)" @@ -11323,7 +13636,7 @@ msgstr "Угол разреженного заполнения" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Угол ориентации шаблона разреженного заполнения, который определяет начало " "или основное направление линий." @@ -11333,57 +13646,91 @@ msgstr "Угол сплошного заполнения" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Угол ориентации шаблона сплошного заполнения, который определяет начало или " "основное направление линий." -msgid "Rotate solid infill direction" -msgstr "Поворот сплошного заполнения" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Разрешить поворот шаблона сплошного заполнение на 90° на каждом слое." - msgid "Sparse infill density" msgstr "Плотность заполнения" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" "Плотность внутреннего заполнения, выраженная в процентах. 100% означает " "сплошное заполнение." +msgid "Align infill direction to model" +msgstr "Выровнять направление заполнения по модели" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Выравнивает направления заполнения и поверхностной заливки в соответствии с " +"ориентацией модели на рабочей пластине. При включении этого параметра " +"направления заливки вращаются вместе с моделью для поддержания оптимальных " +"прочностных характеристик." + +msgid "Insert solid layers" +msgstr "Вставить сплошные слои" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Вставьте сплошное заполнение в определённые слои. Используйте N для вставки " +"каждого N-го слоя, N#K для вставки K последовательных сплошных слоёв через " +"каждые N слоёв (K необязательно, например, «5#» равно «5#1») или список, " +"разделённый запятыми (например, 1,7,9), для вставки в определённые слои. " +"Нумерация слоёв начинается с 1." + +msgid "Fill Multiline" +msgstr "Многострочное заполнение" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" +"Использование нескольких линий для шаблона заполнения, если это " +"поддерживается шаблоном заполнения." + msgid "Sparse infill pattern" msgstr "Шаблон заполнения" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Шаблон разреженного заполнения." -msgid "Grid" -msgstr "Сетка" +msgid "Zig Zag" +msgstr "Зиг заг" + +msgid "Cross Zag" +msgstr "Кросс Заг" + +msgid "Locked Zag" +msgstr "Заблокированный заг" msgid "Line" msgstr "Линии" -msgid "Cubic" -msgstr "Куб" +msgid "Grid" +msgstr "Сетка" msgid "Tri-hexagon" msgstr "Звёзды" -msgid "Gyroid" -msgstr "Гироид" - -msgid "Honeycomb" -msgstr "Соты" +msgid "Cubic" +msgstr "Куб" msgid "Adaptive Cubic" msgstr "Динамический куб" -msgid "3D Honeycomb" -msgstr "3D соты" +msgid "Quarter Cubic" +msgstr "Четверть куба" msgid "Support Cubic" msgstr "Динам. куб. поддержка" @@ -11391,11 +13738,59 @@ msgstr "Динам. куб. поддержка" msgid "Lightning" msgstr "Молния" +msgid "Honeycomb" +msgstr "Соты" + +msgid "3D Honeycomb" +msgstr "3D соты" + +msgid "Lateral Honeycomb" +msgstr "Продольные соты" + +msgid "Lateral Lattice" +msgstr "2D решётка" + msgid "Cross Hatch" -msgstr "Перекрестная решётка" +msgstr "Перекрёстная решётка" + +msgid "TPMS-D" +msgstr "TPMS-D" + +msgid "TPMS-FK" +msgstr "TPMS-FK" + +msgid "Gyroid" +msgstr "Гироид" + +msgid "Lateral lattice angle 1" +msgstr "Угол №1 (2D решётка)" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Угол наклона первой линии для шаблона заполнения «2D решётка» относительно " +"вертикальной оси Z (0 - вертикально)." + +msgid "Lateral lattice angle 2" +msgstr "Угол №2 (2D решётка)" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Угол наклона второй линии для шаблона заполнения «2D решётка» относительно " +"вертикальной оси Z (0 - вертикально)." + +msgid "Infill overhang angle" +msgstr "Угол написания заполнения" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "Угол наклона линий заполнения 60° позволит получить чистые соты." msgid "Sparse infill anchor length" -msgstr "Длина привязок разреженного заполнения" +msgstr "Длина привязки разреженного заполнения" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11405,31 +13800,31 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" -"Соединять линию заполнения с внутренним периметром с помощью короткого " -"отрезка дополнительного периметра (привязок). Если выражено в процентах, то " -"она вычисляется по ширине экструзии заполнения. Программа пытается соединить " -"две ближайшие линии заполнения с коротким отрезком периметра. Если не " -"найдено такого отрезка периметра короче «Максимальной длины привязок " -"разреженного заполнения» (anchor_length_max), то линия заполнения " -"соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена этим параметром, но не больше «Максимальной длины " -"привязок разреженного заполнения» (anchor_length_max).\n" -"Установите этот параметр равным нулю для отключения привязок периметров, " -"соединённых с одной линии заполнения." +"Соединение линии заполнения с внутренним периметром коротким отрезком " +"дополнительного периметра. Если значение выражено в процентах (например, " +"15%), оно рассчитывается по ширине печати заполнения. Snapmaker Orca пытается " +"соединить две линии рядом заполнением коротким отрезком периметра. Если " +"сегмент периметра короче infill_anchor_max не найден, линия заполнения " +"соединяется с сегментом периметра только с одной стороны, а длина " +"полученного сегмента периметра ограничивается этим параметром, но не " +"превышает anchor_length_max.\n" +"Установите этот параметр в ноль, чтобы отключить привязку периметров, " +"соединённых с одной линией заполнения." msgid "0 (no open anchors)" -msgstr "0 (нет открытых привязок)" +msgstr "0 (без открытых привязок)" msgid "1000 (unlimited)" msgstr "1000 (неограниченно)" msgid "Maximum length of the infill anchor" -msgstr "Максимальная длина привязок разреженного заполнения" +msgstr "Макс. длина привязки разреженного заполнения" +# ???? непонятно If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0. msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " @@ -11438,43 +13833,40 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" -"Соединять линию заполнения с внутренним периметром с помощью короткого " -"отрезка дополнительного периметра (привязок). Если выражено в процентах, то " -"она вычисляется по ширине экструзии заполнения. Slic3r пытается соединить " -"две ближайшие линии заполнения с коротким отрезком периметра. Если не " -"найдено такого отрезка периметра короче этого параметра, линия заполнения " -"соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного " -"заполнения» (infill_anchor), но не больше этого параметра.\n" +"Слайсер пытается соединить две ближайшие привязки. Если расстояние между " +"ними больше, чем указано в этом параметре, то соединение не произойдет. " +"Чтобы они всегда соединялись, выберите «Не ограничено». Параметр может задан " +"в процентах от ширины линий заполнения. Установите значение равным 0, чтобы " +"полностью отключить привязки.\n" "Если установить 0, то будет использоваться старый алгоритм для соединения " "заполнения, который даёт такой же результат, как и при значениях 1000 и 0." msgid "0 (Simple connect)" msgstr "0 (без привязок)" -msgid "Acceleration of outer walls" -msgstr "Ускорение на наружных периметрах." +msgid "Acceleration of outer walls." +msgstr "Ускорение на наружных стенках." -msgid "Acceleration of inner walls" -msgstr "Ускорение на внутренних периметрах." +msgid "Acceleration of inner walls." +msgstr "Ускорение на внутренних стенках." -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Ускорение холостого перемещения." msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Ускорение на верхней поверхности. Использование меньшего значения может " "улучшить качество верхней поверхности." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" -"Ускорение на внешнем периметре. Использование более низкого значения может " +"Ускорение на внешней стенке. Использование более низкого значения может " "улучшить качество." msgid "" @@ -11482,7 +13874,7 @@ msgid "" "50%), it will be calculated based on the outer wall acceleration." msgstr "" "Ускорение на мостах. Если задано в процентах, то значение вычисляться " -"относительно ускорения внешнего периметра." +"относительно ускорения внешних стенок." msgid "mm/s² or %" msgstr "мм/с² или %" @@ -11504,7 +13896,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Ускорение на первом слое. Использование более низкого значения может " "улучшить адгезию к столу." @@ -11512,41 +13904,51 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Вкл. ограничение ускорения зигзагов" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" -"Значение ограничение ускорения зигзагов (max_accel_to_decel) в Klipper будет " -"скорректировано автоматически.\n" -"\n" -"Параметр предназначен для ограничения влияния экстремальных переходов от " -"ускорения к замедлению, типичных для коротких зигзагообразных перемещений." +"Значение Klipper-а ограничение ускорения зигзагов (max_accel_to_decel) будет " +"скорректировано автоматически." # ??? Ускорение к замедлению, Ускорение торможения, Скорость торможения, Скорость торможения перед поворотом, Соотношение ускорения к замедлению msgid "accel_to_decel" -msgstr "Ограничение ускорение зигзагов" +msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -"Значение ограничение ускорения зигзагов (max_accel_to_decel) в Klipper будет " -"скорректировано на заданный процент ускорения." +"Значение Klipper-а ограничение ускорения зигзагов (max_accel_to_decel) будет " +"скорректировано на данный процент ускорения." -msgid "Jerk of outer walls" -msgstr "Рывок для внешних периметров." +msgid "Default jerk." +msgstr "Рывок по умолчанию." -msgid "Jerk of inner walls" -msgstr "Рывок для внутренних периметров." +msgid "Junction Deviation" +msgstr "Отклонение соединения" -msgid "Jerk for top surface" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" +"Отклонение соединения прошивки Marlin (заменяет традиционную настройку рывка " +"XY)." + +msgid "Jerk of outer walls." +msgstr "Рывок для внешних стенок." + +msgid "Jerk of inner walls." +msgstr "Рывок для внутренних стенок." + +msgid "Jerk for top surface." msgstr "Рывок для верхней поверхности." -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Рывок для заполнения." -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "Рывок для первого слоя." -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "Рывок при перемещении." msgid "" @@ -11561,24 +13963,24 @@ msgstr "Высота первого слоя" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Высота первого слоя. Незначительное увеличение толщины первого слоя может " "улучшить сцепление со столом." -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "Скорость печати первого слоя, кроме сплошного заполнения." msgid "Initial layer infill" msgstr "Заполнение первого слоя" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Скорость печати сплошного заполнения на первом слое." msgid "Initial layer travel speed" msgstr "Скорость перемещения на первом слое" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "Скорость перемещения на первом слое." msgid "Number of slow layers" @@ -11594,10 +13996,10 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Температура сопла на первом слое" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" -"Температура сопла для печати первого слоя при использовании данной " -"пластиковой нити." +"Температура сопла для печати первого слоя при использовании данного " +"филамента." msgid "Full fan speed at layer" msgstr "Полная скорость вентилятора на слое" @@ -11609,12 +14011,20 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"Скорость вентилятора будет нарастать линейно от нуля на слое " -"\"close_fan_the_first_x_layers\" до максимума на слое \"full_fan_speed_layer" -"\". Значение \"full_fan_speed_layer\" будет игнорироваться, если оно меньше " -"значения \"close_fan_the_first_x_layers\", в этом случае вентилятор будет " -"работать на максимально допустимой скорости на слое " -"\"close_fan_the_first_x_layers\" + 1." +"Скорость вентилятора будет линейно увеличиваться от нуля со слоя заданным " +"параметром «Не включать вентилятор на первых» до заданной максимальной " +"скорости вращения вентилятора на слое заданным параметром «Полная скорость " +"вентилятора на слое». Значение «Полная скорость вентилятора на слое» будет " +"игнорироваться, если оно меньше значения «Не включать вентилятор на первых», " +"в этом случае вентилятор будет работать на максимально допустимой скорости " +"на слое заданном в «Не включать вентилятор на первых» + 1.\n" +"\n" +"Допустим, вы указали «Не включать вентилятор на первых» 2-ух слоях, а " +"«Полная скорость вентилятора на слое» должна сработать на 5-ом слое. Тогда " +"на первых 2-ух слоях вентилятор будет полностью выключен. На 5-ом слое он " +"начнёт работать так, как указано в настройках максимальной скорости вращения " +"вентилятора. Промежуточные же значения скорости вращения вентилятора на 3-ем " +"и 4-ом слоях будут линейно изменятся." msgid "layer" msgstr "слой" @@ -11622,51 +14032,91 @@ msgstr "слой" msgid "Support interface fan speed" msgstr "Скорость вентилятора на связующем слое" +# ????? Установите значение -1, чтобы запретить переопределять этот параметр. msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." msgstr "" -"Скорость, применяемая ко всем связующим слоях, чтобы высокой скоростью " -"вентилятора ослабить сцепление между слоями.\n" +"Скорость вращения вентилятора при печати связующих слоёв поддержки. " +"Увеличение этой скорости уменьшает сцепление между поддержками и основной " +"деталью, что облегчает их отделение.\n" +"\n" +"Чтобы отключить, установите значение -1.\n" "Установите значение -1, чтобы запретить переопределять этот параметр.\n" -"Может быть отменено только командой disable_fan_first_layers." +"Если включена опция «Не включать вентилятор на первых» слоях, то она " +"перекрывает эту настройку." + +msgid "Internal bridges fan speed" +msgstr "Скорость вентилятора для внутренних мостов" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Скорость вращения вентилятора при печати внутренних мостов.\n" +"При значении -1 будут использоваться настройки вентилятора для нависающих " +"элементов.\n" +"Снижение скорости вентилятора для внутренних мостов по сравнению с обычной " +"скоростью может помочь уменьшить деформацию детали, вызванную чрезмерным " +"охлаждением большой поверхности в течение длительного времени." + +msgid "Ironing fan speed" +msgstr "Скорость вентилятора при разглаживании" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Скорость вентилятора охлаждения этой детали применяется при глажении. " +"Установка этого параметра на значение ниже обычной скорости снижает " +"вероятность засорения сопла из-за низкого объёмного расхода, делая все более " +"плавным.\n" +"Установите значение -1, чтобы отключить эту функцию." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" -"Случайное дрожание сопла при печати внешнего периметра для создания эффекта " -"шероховатой поверхности. Эта настройка определяет положение нечёткой " -"оболочки." +"Случайное дрожание сопла при печати периметра для создания эффекта " +"шероховатой поверхности. Эта настройка определяет, где будет применяться " +"нечёткая оболочка." msgid "Contour" -msgstr "Внешний периметр" +msgstr "Контур" msgid "Contour and hole" -msgstr "Внешний периметр и отверстия" +msgstr "Контур и отверстие" +# на всех внутренних и внешних периметрах, На всех периметрах msgid "All walls" -msgstr "Все периметры" +msgstr "Все стенки" msgid "Fuzzy skin thickness" msgstr "Толщина нечёткой оболочки" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" -"Величина амплитуды дрожания (т.е. в обои направления) измеряемая " -"перпендикулярно печатаемому периметру. Желательно, чтобы она была меньше " -"ширины внешнего периметра." +"Ширина, в пределах которой следует будет применено дрожание. Рекомендуется, " +"чтобы она была меньше ширины внешней линии стенки." msgid "Fuzzy skin point distance" msgstr "Расстояние между точками нечёткой оболочки" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Среднее расстояние между случайными точками, которые вносятся в каждый " "сегмент линии периметра. Уменьшение расстояния между точками нечёткой " @@ -11676,36 +14126,179 @@ msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "Нечёткая оболочки на первом слое" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." msgstr "Применять ли нечёткую оболочку к первому слою." -# Или пробелы оставить??? +msgid "Fuzzy skin generator mode" +msgstr "Режим генерации нечеткой оболочки" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." + +msgid "Displacement" +msgstr "Смещение" + +msgid "Extrusion" +msgstr "Экструзия" + +msgid "Combined" +msgstr "Комбинированная" + +msgid "Fuzzy skin noise type" +msgstr "Тип нечёткой оболочки" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Тип шума, используемый для генерации нечёткой оболочки:\n" +"\n" +"Классический - классический алгоритм равномерного случайного шума.\n" +"Шум Перлина - алгоритм структурированного шума, создающий пространственно " +"когерентный шум и обеспечивающий более однородную текстуру.\n" +"Волнообразный - разновидность шума Перлина, которая имеет более волнистый " +"или облачный вид.\n" +"Гребенчатый - гребнеобразный шум с резкими, зазубренными элементами, " +"создающий текстуру, напоминающую мрамор.\n" +"Шум Вороного - делит поверхность на ячейки Вороного и смещает каждую из них " +"на случайную величину, создавая текстуру, напоминающую лоскутное одеяло." + +msgid "Classic" +msgstr "Классический" + +msgid "Perlin" +msgstr "Шум Перлина" + +# ??? Шум волн +msgid "Billow" +msgstr "Волнообразный" + +msgid "Ridged Multifractal" +msgstr "Гребенчатый" + +msgid "Voronoi" +msgstr "Шум Вороного" + +# Размер шероховатости +msgid "Fuzzy skin feature size" +msgstr "Размер элемента нечёткой оболочки" + +# 0.5 мм - Мелкая рябь +# 2 мм - Крупные волны +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Параметр определяет базовый размер элемента когерентного шума в миллиметрах. " +"Более высокое значение увеличивает размер этого элемента." + +# уровень детализации шума Перлина +msgid "Fuzzy Skin Noise Octaves" +msgstr "Количество октав нечёткой оболочки" + +# Чем больше октав, тем сложнее и «естественнее» выглядит шероховатость. +# Октавы - это количество кривых Перлина, которые отвечают за неоднородность шума. +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Количество октав когерентного шума, которые отвечают за его неоднородность. " +"Более высокие значения повышают детализацию шума, но увеличивают время " +"вычисления." + +# Интенсивность затухания шума нечёткой оболочки +msgid "Fuzzy skin noise persistence" +msgstr "Затухание шума нечёткой оболочки" + +# 0.2 - Мягкий шум (преобладают крупные волны). +# 0.8 - Резкий шум (мелкие детали усиливают «рваность»). +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Скорость затухания для более высоких октав когерентного шума. Более низкие " +"значения приведут к сглаживанию шума." + msgid "Filter out tiny gaps" msgstr "Игнорировать небольшие щели" msgid "Layers and Perimeters" msgstr "Слои и периметры" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Небольшие промежутки меньше указанного порога не будут заполняться." +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Не заполнять щели, длина которого меньше указанного порога (в мм). Эта " +"настройка применяется к верхнему, нижнему и сплошному заполнению, а при " +"использовании классического генератора периметров - к заполнению щелей " +"стенок." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Скорость заполнения пробелов. Пробелы обычно имеют неравномерную ширину " -"линии и должен печататься медленнее." +"линии и должны печататься медленнее." msgid "Precise Z height" msgstr "Точная высота по Z" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" "Включите этот параметр, чтобы получить точную высоту модели по оси Z после " -"нарезки. Точная высота модели будет получена путем точной настройки высоты " +"нарезки. Точная высота модели будет получена путём точной настройки высоты " "последних нескольких слоёв." msgid "Arc fitting" @@ -11713,9 +14306,9 @@ msgstr "Аппроксимация дугами" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -11724,7 +14317,7 @@ msgstr "" "Включите, если хотите чтобы программа пыталась заменить последовательности " "из коротких прямолинейных участков дугами (используя команды G2 и G3). " "Функция должна поддерживаться прошивкой принтера. Значение допуска " -"траектории такое же как разрешение G-кода. \n" +"траектории такое же как разрешение G-кода.\n" "\n" "Примечание: для устройств с прошивкой Klipper рекомендуется отключить эту " "опцию. Klipper не получает преимуществ от этой опции, поскольку прошивка " @@ -11735,7 +14328,8 @@ msgstr "" msgid "Add line number" msgstr "Добавить номер строки" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "При включении, в начало каждой строки G-кода, будет добавляться номер строки " "(Nx)." @@ -11745,7 +14339,7 @@ msgstr "Проверка первого слоя" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "При включении, камера принтера будет проверять качество печати первого слоя." @@ -11754,7 +14348,7 @@ msgstr "Тип сопла" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Материал сопла. Определяет абразивную стойкость сопла, а также то, каким " "материалом можно печатать." @@ -11768,6 +14362,9 @@ msgstr "Закалённая сталь" msgid "Stainless steel" msgstr "Нержавеющая сталь" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Латунь" @@ -11786,8 +14383,8 @@ msgstr "HRC" msgid "Printer structure" msgstr "Кинематика принтера" -msgid "The physical arrangement and components of a printing device" -msgstr "Конструкция физического принтера" +msgid "The physical arrangement and components of a printing device." +msgstr "Конструкция физического принтера." msgid "CoreXY" msgstr "CoreXY" @@ -11813,19 +14410,19 @@ msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" -"Если в принтере имеет вспомогательный вентилятор для охлаждения моделей, " -"можете включить эту опцию. \n" -"G-код команда: M106 P2 S(0-255)." +"Если в принтере имеется вспомогательный вентилятор для охлаждения моделей " +"(обычно это боковой вентилятор), можете включить эту опцию. G-код команда: " +"M106 P2 S(0-255)." msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Запуск вентилятора на указанное количество секунд раньше целевого времени " @@ -11839,7 +14436,7 @@ msgstr "" "Установите 0 для отключения." msgid "Only overhangs" -msgstr "Только на свесах" +msgstr "Только на нависаниях" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "Применять смещение времени только для охлаждения нависаний." @@ -11864,7 +14461,7 @@ msgstr "" msgid "Time cost" msgstr "Стоимость часа печати" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "Стоимость часа работы принтера." msgid "money/h" @@ -11895,7 +14492,7 @@ msgstr "" msgid "G-code flavor" msgstr "Тип G-кода" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "Выбор типа G-кода совместимым с вашим принтером." msgid "Klipper" @@ -11904,7 +14501,7 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Гранульная модификация принтера" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" "Включите, если для печати вместо пластиковых нитей используются пластиковые " "гранулы." @@ -11912,34 +14509,32 @@ msgstr "" msgid "Support multi bed types" msgstr "Поддержка нескольких типов столов" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "Включите, если хотите использовать несколько типов столов." -# ?????? Название моделей msgid "Label objects" -msgstr "Помечать объекты" +msgstr "Помечать модели" -# ?????? msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" "Отвечает за присвоение уникальных меток или названий каждой модели или " -"элементу, что позволяет отменять печать любого из них по вашему выбору." +"элементу, что позволяет отменять печать любого из них по вашему выбору.\n" +"\n" "Включите эту опцию, чтобы добавить комментарии в G-код с указанием того, к " "какой модели он принадлежит, что полезно для плагина Octoprint CancelObject. " -"Эта настройка не совместима с настройкой «Одноэкструдерный " -"мультиматериальный принтер» и «Очистка в модель» / «Очистка в заполнение " -"модели»." +"Эта настройка не совместима с настройкой «Одиночный мультиматериальный " +"экструдер» и «Очистка в модель» / «Очистка в заполнение модели»." msgid "Exclude objects" -msgstr "Исключить модели" +msgstr "Исключение моделей" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" -"Включите эту опцию, чтобы добавить команду EXCLUDE OBJECT (исключения " +"Включите эту опцию, чтобы добавить команду EXCLUDE OBJECT (исключение " "моделей) в G-код для принтера с прошивкой Klipper." msgid "Verbose G-code" @@ -11962,11 +14557,176 @@ msgid "" "reduce time. Wall is still printed with original layer height." msgstr "" "Для сокращения времени печати есть возможность печатать заполнение не на " -"каждом слое, а на нескольких слоях сразу. \n" +"каждом слое, а на нескольких слоях сразу.\n" "Периметры по-прежнему печатаются с исходной высотой слоя." +msgid "Infill shift step" +msgstr "Шаг сдвига заполнения" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Этот параметр добавляет небольшое смещение к каждому слою заполнения, " +"создавая перекрестную текстуру." + +msgid "Sparse infill rotation template" +msgstr "Шаблон поворота заполнения" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Поверните направление разреженного заполнения для каждого слоя, используя " +"шаблон углов. Введите градусы, разделённые запятыми (например, " +"«0,30,60,90»). Углы применяются в порядке следования слоёв и повторяются, " +"когда список заканчивается. Поддерживается расширенный синтаксис: «+5» " +"поворачивает на +5° каждый слой; «+5#5» поворачивает на +5° каждые 5 слоёв. " +"Подробности см. в Wiki. При установке шаблона стандартное направление " +"заполнения игнорируется. Примечание: некоторые шаблоны заполнения (например, " +"Gyroid) сами управляют поворотом; используйте с осторожностью." + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Поворот шаблона сплошного заполнения" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Этот параметр добавляет поворот направления сплошного заполнения к каждому " +"слою в соответствии с указанным шаблоном. Шаблон представляет собой список " +"углов в градусах, разделённых запятыми, например, «0,90». Первый угол " +"применяется к первому слою, второй — ко второму и так далее. Если слоёв " +"больше, чем углов, углы будут повторяться. Обратите внимание, что не все " +"шаблоны сплошного заполнения поддерживают поворот." + +msgid "Skeleton infill density" +msgstr "Плотность заполнения скелета" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"Оставшаяся часть контура модели после удаления определённой глубины с " +"поверхности называется скелетом. Этот параметр используется для регулировки " +"плотности этого участка. Если два региона имеют одинаковые настройки " +"разреженного заполнения, но разную плотность скелета, их скелетные области " +"будут образовывать перекрывающиеся участки. Значение по умолчанию равно " +"плотности заполнения." + +msgid "Skin infill density" +msgstr "Плотность заполнения оболочки" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"Часть внешней поверхности модели в пределах определённого диапазона глубин " +"называется оболочкой. Этот параметр используется для регулировки плотности " +"этой области. Если две области имеют одинаковые настройки заполнения, но " +"разную плотность оболочки, эта область не будет разделена на две отдельные " +"области. Значение по умолчанию равно плотности заполнения." + +msgid "Skin infill depth" +msgstr "Глубина заполнения оболочки" + +msgid "The parameter sets the depth of skin." +msgstr "Этот параметр устанавливает глубину заполнения оболочки." + +msgid "Infill lock depth" +msgstr "Глубина заблокированного заполнения" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "Параметр задает глубину перекрытия между внутренней частью и оболочки." + +msgid "Skin line width" +msgstr "Ширина линии оболочки" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Отрегулируйте ширину линий выбранных контуров облочки." + +msgid "Skeleton line width" +msgstr "Ширина линии скелета" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Отрегулируйте ширину линий выбранных контуров скелета." + +msgid "Symmetric infill Y axis" +msgstr "Симметричное заполнение по оси Y" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Если модель состоит из двух частей, симметричных относительно оси Y, и вы " +"хотите, чтобы эти части имели симметричные текстуры, щелкните эту опцию на " +"одной из частей." + +msgid "Infill combination - Max layer height" +msgstr "Максимальная высота слоя (КЗ)" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Максимальная высота слоя для комбинированного разреженного заполнения.\n" +"\n" +"Установите 0 или 100%, чтобы использовать значение диаметра сопла (для " +"максимального сокращения времени печати), или значение ~80% для увеличения " +"прочности разреженного заполнения.\n" +"\n" +"Количество слоёв, для которых объединяется заполнение, получается путем " +"деления этого значения на высоту слоя и округления до ближайшего десятичного " +"знака.\n" +"\n" +"Используйте либо абсолютные значения в мм (например, 0,32 мм для сопла 0,4 " +"мм), либо значения в % (например, 80%). Это значение не должно быть больше " +"диаметра сопла." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." -msgstr "Пластиковая нить для печати заполнения." +msgstr "Филамент для печати заполнения." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " @@ -11998,17 +14758,23 @@ msgstr "Перекрытие заполнения с периметром на msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "Площадь верхнего сплошного заполнения немного увеличивается, чтобы перекрыть " "периметр для лучшего сцепления и минимизировать появление мелких отверстий в " "местах соединения верхнего заполнения с периметрами. Значение 25-30% " "является хорошей отправной точкой, минимизирующей появление таких отверстий." -msgid "Speed of internal sparse infill" -msgstr "Скорость заполнения" +msgid "Speed of internal sparse infill." +msgstr "Скорость печати разреженного заполнения." + +msgid "Inherits profile" +msgstr "Наследует профиль" + +msgid "Name of parent profile." +msgstr "Имя родительского профиля." msgid "Interface shells" msgstr "Связующие оболочки" @@ -12016,27 +14782,35 @@ msgstr "Связующие оболочки" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Принудительное создание сплошных оболочек между смежными материалами/" "объёмами. Полезно для многоэкструдерной печати полупрозрачными материалами " -"или растворимой поддержки." +"или растворимой поддержкой." msgid "Maximum width of a segmented region" -msgstr "Максимальная ширина сегментированной области" +msgstr "Глубина проникновения окрашенной области" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Максимальная ширина сегментированной области. Установите 0 для отключения " -"этой функции." +"Толщина той части модели, которая была окрашена инструментом " +"мультиматериальная покраска. Фактически это глубина проникновения окрашенной " +"области в модель. Установите 0 для отключения работы этой функции." msgid "Interlocking depth of a segmented region" msgstr "Глубина переплетения окрашенной области" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Глубина взаимосвязи сегментированной области. Установите 0 для отключения " -"этой функции." +"Глубина взаимного переплетения окрашенной области с основной моделью. Это " +"значительно увеличивает прочность соединения между частями детали при " +"мультиматериальной покраске.\n" +"При 0 и если «Глубина переплетения окрашенной области» будет больше значения " +"«Глубина проникновения окрашенной области», то переплетения не будет." msgid "Use beam interlocking" msgstr "Создать взаимосвязанную структуру" @@ -12046,8 +14820,9 @@ msgid "" "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" -"Создать взаимосвязанную структуру балок в местах соприкосновения моделей. " -"Это улучшит адгезию между моделями, особенно моделями из разных материалов." +"Создать систему взаимосвязанных балок в местах, где модели соприкасаются " +"друг с другом. Это позволит улучшить сцепление между моделями, особенно " +"между моделями из разных материалов." msgid "Interlocking beam width" msgstr "Ширина взаимосвязанных балок" @@ -12068,8 +14843,8 @@ msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" -"Высота балок взаимосвязанной структуры, измеряемая в количестве слоев. Чем " -"меньше слоев, тем она будет прочнее, но более подвержена дефектам." +"Высота балок взаимосвязанной структуры, измеряемая в количестве слоёв. Чем " +"меньше слоёв, тем она будет прочнее, но более подвержена дефектам." msgid "Interlocking depth" msgstr "Глубина взаимосвязанной структуры" @@ -12103,7 +14878,7 @@ msgstr "" "гладкой поверхности. После печати верхнего слоя сопло пройдётся по нему ещё " "раз, но с значительно меньшей скоростью и потоком. Это нужно чтобы " "разгладить поверхность, скрыв шаблон заполнения и другие дефекты " -"поверхности. Эта функция увеличивает время печати." +"поверхности. Эта функция увеличивает время печати" msgid "No ironing" msgstr "Без разглаживания" @@ -12120,15 +14895,15 @@ msgstr "Все сплошные поверхности" msgid "Ironing Pattern" msgstr "Шаблон разглаживания" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "Шаблон по которому будет производиться разглаживание." msgid "Ironing flow" -msgstr "Поток" +msgstr "Поток разглаживания" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Количество материала, которое необходимо выдавить во время разглаживания " "относительно потока при нормальной высоте слоя." @@ -12136,40 +14911,55 @@ msgstr "" msgid "Ironing line spacing" msgstr "Расстояние между линиями разглаживания" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Расстояние между линиями разглаживания." +# ??? Граница без разглаживания +msgid "Ironing inset" +msgstr "Границы разглаживания" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Расстояние в мм между областью разглаживания и краем модели. При значении 0 " +"это значение равно половине диаметра сопла." + msgid "Ironing speed" msgstr "Скорость разглаживания" -msgid "Print speed of ironing lines" -msgstr "Скорость разглаживания" +msgid "Print speed of ironing lines." +msgstr "Скорость разглаживания." -msgid "Ironing angle" -msgstr "Угол разглаживания" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"Выбор угла разглаживания. Отрицательное число отключает эту функцию и " -"использует метод по умолчанию." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "" "Команды в G-коде, которые выполняются каждый раз после смены слоя, то есть " "после поднятия оси Z." +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Поддержка тихого режима" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" -"Поддержка тихого режима, в котором принтер использует более низкие ускорения " -"печати для уменьшения уровня шума. Прошивка принтера должна поддерживать " -"данную возможность." +"Если принтер поддерживает бесшумный режим, в котором принтер использует " +"меньшее ускорение для печати." msgid "Emit limits to G-code" msgstr "Отправлять в G-код" @@ -12179,28 +14969,30 @@ msgstr "Ограничения принтера" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Если включено, ограничения принтера будут передаваться в файл G-кода.\n" "Если в качестве типа G-кода выбран Klipper опция будет игнорироваться." msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" -"Команды в G-коде, которые выполняются при ручной постановке паузы печати. " -"Пользователь может вставить её в окне предпросмотра нарезки." +"Команды в G-коде, которые выполняются при ручной постановке печати на паузу. " +"Пользователь может вставить его в окне предпросмотра нарезки, нажав правой " +"кнопкой мыши на ползунок выбора слоя." # используется для пользовательского шаблона -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "" -"Команды в G-коде, которые выполняются при вставке его в окне предпросмотра " -"нарезки (ПКМ по полосе выбора слоя)." +"Пользовательский шаблон команд, которые выполняются при ручной вставке этого " +"G-кода в окне предпросмотра нарезки, нажав правой кнопкой мыши на ползунок " +"выбора слоя." msgid "Small area flow compensation (beta)" msgstr "Компенсация потока небольших областей (beta)" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "Включение компенсации потока для небольших областей заполнения." msgid "Flow Compensation Model" @@ -12209,12 +15001,14 @@ msgstr "Модель компенсации потока" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Модель представлена в виде разделенных запятыми пар значений, длины " -"экструзии и поправочного коэффициента потока, по одному на строку в " -"следующем формате: \"1.234,5.678\"." +"Модель компенсации расхода, используемая для корректировки расхода в " +"небольших областях заполнения. Модель выражается парой значений, разделенных " +"запятыми: длиной экструзии и коэффициентом коррекции расхода. Каждая пара " +"находится на отдельной строке, за которой следует точка с запятой, в " +"следующем формате: «1,234, 5,678;»" msgid "Maximum speed X" msgstr "Максимальная скорость перемещения по X" @@ -12253,16 +15047,16 @@ msgid "Maximum acceleration E" msgstr "Максимальное ускорение подачи у экструдера" msgid "Maximum acceleration of the X axis" -msgstr "Максимальное ускорение по оси X." +msgstr "Максимальное ускорение по оси X" msgid "Maximum acceleration of the Y axis" -msgstr "Максимальное ускорение по оси Y." +msgstr "Максимальное ускорение по оси Y" msgid "Maximum acceleration of the Z axis" -msgstr "Максимальное ускорение по оси Z." +msgstr "Максимальное ускорение по оси Z" msgid "Maximum acceleration of the E axis" -msgstr "Максимальное ускорение подачи у экструдера." +msgstr "Максимальное ускорение экструдера" msgid "Maximum jerk X" msgstr "Максимальный рывок по X" @@ -12274,19 +15068,28 @@ msgid "Maximum jerk Z" msgstr "Максимальный рывок по Z" msgid "Maximum jerk E" -msgstr "Максимальный рывок у экструдера" +msgstr "Максимальный рывок экструдера" msgid "Maximum jerk of the X axis" -msgstr "Максимальный рывок по оси X." +msgstr "Максимальный рывок по оси X" msgid "Maximum jerk of the Y axis" -msgstr "Максимальный рывок по оси Y." +msgstr "Максимальный рывок по оси Y" msgid "Maximum jerk of the Z axis" -msgstr "Максимальный рывок по оси Z." +msgstr "Максимальный рывок по оси Z" msgid "Maximum jerk of the E axis" -msgstr "Максимальный рывок у экструдера." +msgstr "Максимальный рывок экструдера" + +msgid "Maximum Junction Deviation" +msgstr "Макс. значение Junction Deviation" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" msgstr "Минимальная скорость перемещения при печати" @@ -12307,65 +15110,88 @@ msgid "Maximum acceleration for extruding (M204 P)" msgstr "Максимальное ускорение при печати (M204 P)" msgid "Maximum acceleration for retracting" -msgstr "Максимальное ускорение отката" +msgstr "Максимальное ускорение ретракта" msgid "Maximum acceleration for retracting (M204 R)" -msgstr "Максимальное ускорение отката (M204 R)" +msgstr "Максимальное ускорение ретракта (M204 R)" msgid "Maximum acceleration for travel" msgstr "Максимальное ускорение холостых перемещений" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" "Максимальное ускорение при перемещении без печати (M204 T), применяемое " "только для Marlin 2." +# ??? Избегать резонанса, Не допускать +msgid "Resonance avoidance" +msgstr "Избегать резонанса" + +# ??? За счёт снижения скорости печати внешнего периметра для избежания попадания в зону резонанса принтера, удаётся предотвратить появление ряби на поверхности модели. Пожалуйста, отключите эту опцию при тестировании на вертикальные артефакты. +# ??? Путем снижения скорости печати внешнего периметра... +# ??? Снижение скорости печати внешнего периметра для избежания попадания в зону резонанса принтера позволяет избежать появление ряби на поверхности модели.\nПожалуйста, отключите эту опцию при тестировании на вертикальные артефакты. +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" +"Снижение скорости внешней стенки для исключения резонансной зоны принтера " +"позволяет избежать появления ряби на поверхности модели.\n" +"Отключите эту опцию при проверке ряби." + +msgid "Min" +msgstr "Мин" + +msgid "Minimum speed of resonance avoidance." +msgstr "Минимальная скорость предотвращения резонанса." + +msgid "Max" +msgstr "Макс" + +msgid "Maximum speed of resonance avoidance." +msgstr "Максимальная скорость предотвращения резонанса." + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "Скорость вентилятора охлаждения моделей может быть увеличена, если включено " "автоматическое охлаждение. Это максимальное ограничение скорости вентилятора " "для охлаждения моделей." -msgid "Max" -msgstr "Максимальная" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Это наибольшая высота печатаемого слоя для этого экструдера, которая " -"используется для ограничения функции «Переменная высота слоёв»." +"Максимальная высота печатаемого слоя для экструдера. Используется для " +"ограничения максимальной высоты слоя при включении адаптивной высоты слоя." -# ????? msgid "Extrusion rate smoothing" msgstr "Сглаживание скорости экструзии" -# ????? проверить Pressure equalizer msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " "the printer transitions from printing a high flow (high speed/larger width) " "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12381,54 +15207,67 @@ msgstr "" "значения означают, что допускаются более высокие изменения скорости " "экструзии, что приводит к более быстрому переключению скоростей.\n" "\n" -"Значение 0 отключает эту функцию. \n" +"Значение 0 отключает эту функцию.\n" "\n" -"Для высокоскоростных принтеров с прямым приводом (например, Bambu lab или " -"Voron) обычно не требуется использование данного значения. Однако в " -"некоторых случаях, когда скорость печати сильно различается, это может " -"принести некоторую дополнительную пользу. Например, когда происходят резкие " -"замедления из-за нависаний. В этих случаях рекомендуется использовать " +"Для высокоскоростных принтеров с высокопроизводительным директ-экструдером " +"(например, Bambu lab или Voron) обычно не требуется использование данного " +"параметра. Однако в некоторых случаях, когда скорость печати сильно " +"различается, это может принести некоторую пользу. Например, когда происходят " +"резкие замедления из-за нависаний. В этих случаях рекомендуется использовать " "высокое значение, составляющее около 300-350 мм³/с², так как это " "обеспечивает достаточное сглаживание, помогающее прогнозированию давления " "достичь более плавного перехода потока.\n" "\n" -"Для более медленных принтеров, не использующих прогнозирование давления " -"(pressure advance), это значение должно быть значительно ниже. Значение " -"10-15 мм³/с² является хорошей отправной точкой для экструдеров с прямым " -"приводом и 5-10 мм³/с² для боуден экструдеров.\n" +"Для более медленных принтеров, не использующих прогнозирование расхода, это " +"значение должно быть значительно ниже. Значение 10-15 мм³/с² является " +"хорошей отправной точкой для экструдеров с прямым приводом и 5-10 мм³/с² для " +"боуден экструдеров.\n" "\n" "В Prusa Slicer эта функция известна как «Сглаживание расхода» (Pressure " "equalizer).\n" "\n" "Примечание: этот параметр отключает аппроксимацию дугами." -msgid "mm³/s²" -msgstr "мм³/с²" - msgid "Smoothing segment length" msgstr "Длина сглаживающего сегмента" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Меньшее значение приводит к более плавному изменению скорости экструзии. " -"Однако это приводит к значительному увеличению размера G-код файла и " -"увеличению количества инструкций для обработки принтером. \n" +"Более низкое значение обеспечивает более плавное изменение скорости " +"экструзии. Однако это приводит к значительному увеличению размера файла G-" +"кода и увеличению количества инструкций, которые должен обработать принтер.\n" "\n" -"Значение по умолчанию, равное 3, хорошо подходит для большинства случаев. " -"Если принтер печатает с мини-фризами, увеличьте это значение, чтобы " -"уменьшить количество выполняемых изменений.\n" +"Значение по умолчанию, равное 3, подходит для большинства случаев. Если ваш " +"принтер работает нестабильно, увеличьте это значение, чтобы уменьшить " +"количество корректировок.\n" "\n" -"Допустимые значения: 1–5." +"Допустимые значения: 0,5–5" -msgid "Minimum speed for part cooling fan" +# ??? +msgid "Apply only on external features" +msgstr "Применить только к внешним элементам" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Сглаживание скорости экструзии будет применяться только к внешним периметрам " +"и нависаниям.\n" +"Это помогает уменьшить количество артефактов, вызванные резкими перепадами " +"скорости на видимых внешних участках, без влияния на скорость печати " +"внутренних элементов, которые не видны пользователю." + +msgid "Minimum speed for part cooling fan." msgstr "Минимальная скорость вентилятора обдува модели." msgid "" @@ -12438,43 +15277,38 @@ msgid "" "Please enable auxiliary_fan in printer settings to use this feature. G-code " "command: M106 P2 S(0-255)" msgstr "" -"Скорость вращения вспомогательного вентилятора для охлаждения моделей. Он " -"всегда будет работать с этой скоростью, за исключением первых нескольких " -"слоёв, которые обычно настроены на работу без охлаждения.\n" +"Скорость вращения вспомогательного вентилятора для охлаждения моделей. " +"Обычно это боковой вентилятор. Он всегда будет работать с этой скоростью, за " +"исключением первых нескольких слоёв, которые обычно настроены на работу без " +"охлаждения.\n" "Пожалуйста, включите вспомогательный вентилятор для охлаждения моделей " -"(auxiliary_fan) в настройках принтера, чтобы использовать эту функцию. \n" +"(auxiliary_fan) в настройках принтера, чтобы использовать эту функцию.\n" "G-код команда: M106 P2 S(0-255)." -msgid "Min" -msgstr "Минимальная" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Это наименьшая высота печатаемого слоя для данного экструдера и в то же " -"время нижний предел для функции «Переменная высота слоёв»." +"Минимальная высота печатаемого слоя для экструдера. Используется для " +"ограничения минимальной высоты слоя при включении адаптивной высоты слоя." msgid "Min print speed" msgstr "Минимальная скорость печати" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" "Минимальная скорость печати, до которой принтер замедлится, чтобы попытаться " "сохранить минимальное время слоя, указанное выше, если включена опция " "«Замедлять печать для лучшего охлаждения слоёв»." -msgid "Nozzle diameter" -msgstr "Диаметр сопла" - -msgid "Diameter of nozzle" -msgstr "Диаметр сопла" +msgid "The diameter of nozzle." +msgstr "Диаметр сопла." msgid "Configuration notes" -msgstr "Примечание конфигурации" +msgstr "Примечания к конфигурации" msgid "" "You can put here your personal notes. This text will be added to the G-code " @@ -12496,16 +15330,15 @@ msgstr "" msgid "Nozzle volume" msgstr "Объём сопла" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Объём сопла между резцом прутка и кончиком сопла." +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Объем сопла между резаком и концом сопла." msgid "Cooling tube position" msgstr "Позиция охлаждающей трубки" -# ????? до кончика сопла может быть? +# ??? кончика сопла msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "" -"Расстояние между центральной точкой охлаждающей трубки и кончиком экструдера." +msgstr "Расстояние от центра охлаждающей трубки до сопла." msgid "Cooling tube length" msgstr "Длина охлаждающей трубки" @@ -12516,7 +15349,7 @@ msgstr "" "движениях." msgid "High extruder current on filament swap" -msgstr "Повышение тока экструдера при замене прутка" +msgstr "Повышение тока экструдера при замене филамента" msgid "" "It may be beneficial to increase the extruder motor current during the " @@ -12524,19 +15357,19 @@ msgid "" "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" "Это может быть полезно для увеличения тока двигателя экструдера во время " -"замены прутка, чтобы быстро увеличить скорость подачи и преодолеть " +"замены филамента, чтобы быстро увеличить скорость подачи и преодолеть " "сопротивление при загрузке прутка с плохой формой кончика." # ??? Положение прутка при парковке msgid "Filament parking position" -msgstr "Положение парковки прутка" +msgstr "Положение парковки филамента" msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Расстояние от кончика экструдера до точки, где размещается пруток при " -"выгрузке. Расстояние должно соответствовать значению в прошивке принтера." +"Расстояние от сопла до точки, где размещается филамент при выгрузке. " +"Расстояние должно соответствовать значению в прошивке принтера." msgid "Extra loading distance" msgstr "Дополнительная длина загрузки" @@ -12544,13 +15377,14 @@ msgstr "Дополнительная длина загрузки" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" -"Если установлено 0, то расстояние, которое проходит пруток при перемещении " -"из положения парковки во время загрузки, точно такое же, как и при выгрузке. " -"При положительном значении, она загружается дальше; при отрицательном, ход " -"загрузки короче (по сравнению с выгрузкой)." +"При значении, равном нулю, расстояние, на которое филамент перемещается из " +"положения парковки при загрузке, точно такое же, как и расстояние, на " +"которое она перемещалась при извлечении. При положительном значении филамент " +"перемещается дальше, при отрицательном — перемещение при загрузке короче, " +"чем при извлечении." msgid "Start end points" msgstr "Начальные и конечные точки" @@ -12559,22 +15393,29 @@ msgid "The start and end points which is from cutter area to garbage can." msgstr "Начальная и конечная точки от зоны обрезки до мусорного лотка." msgid "Reduce infill retraction" -msgstr "Уменьшать отката при заполнении" +msgstr "Уменьшать ретракт при заполнении" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" -"Отключает откат, когда перемещения полностью совершаются в области " -"заполнения (и, таким образом, любые подтёки скорее всего будут не заметны). " -"Это поможет снизить количество откатов при печати сложной модели и " -"сэкономить время печати, но увеличит время нарезки и генерации G-кода." +"Отключение ретракта, когда перемещение происходит в зоне заполнения. Это " +"означает, что подтеков не будет видно. Это может сократить время отвода для " +"сложных моделей и сэкономить время печати, но замедлит нарезку и генерацию G-" +"кода." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Эта опция снижает температуру неактивных экструдеров для предотвращения течи " +"материала из сопла." msgid "Filename format" msgstr "Формат имени файла" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "Пользователь может сам задать имя файла проекта при экспорте." msgid "Make overhangs printable" @@ -12600,17 +15441,14 @@ msgstr "Делать нависания отверстий пригодными msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Максимальная площадь отверстия в основании модели до его заполнения " "материалом конической геометрии. При 0 все отверстия в основании модели " "будут заполнены." -msgid "mm²" -msgstr "мм²" - msgid "Detect overhang wall" -msgstr "Определять нависающие периметры" +msgstr "Обнаруживать нависающие периметры" #, c-format, boost-format msgid "" @@ -12618,7 +15456,10 @@ msgid "" "speed to print. For 100%% overhang, bridge speed is used." msgstr "" "Определяет процент нависания относительно ширины линии и использует разную " -"скорость печати. Для 100%%-го свеса используется скорость печати мостов." +"скорость печати. Для 100%%-го нависания используется скорость печати мостов." + +msgid "Filament to print walls." +msgstr "Филамент для печати стенок." msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " @@ -12627,10 +15468,10 @@ msgstr "" "Ширина экструзии внутренних периметров. Если задано в процентах, то значение " "вычисляться относительно диаметра сопла." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Скорость печати внутренних периметров." -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Количество периметров на каждом слое модели." msgid "Alternate extra wall" @@ -12638,10 +15479,10 @@ msgstr "Чередующаяся дополнительная стенка" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -12650,8 +15491,8 @@ msgstr "" "заполнения заключаются между этими дополнительными стенками, что приводит к " "повышению прочности печати.\n" "\n" -"При включении этой опции необходимо отключить опцию «Обеспечивать верт. " -"толщину оболочки».\n" +"При включении этой опции необходимо отключить опцию «Сохранение толщины " +"вертикальной оболочки».\n" "\n" "Использование шаблона заполнения «Молния» вместе с этой опцией не " "рекомендуется, поскольку количество заполнения, к которому можно прикрепить " @@ -12670,16 +15511,25 @@ msgstr "" "качестве первого аргумента, и они смогут получить доступ к настройкам " "конфигурации Snapmaker Orca, читая переменные окружения." +msgid "Printer type" +msgstr "Тип принтера" + +msgid "Type of the printer." +msgstr "Тип принтера." + msgid "Printer notes" msgstr "Примечания к принтеру" msgid "You can put your notes regarding the printer here." msgstr "Здесь вы можете написать свои заметки о текущем принтере." +msgid "Printer variant" +msgstr "Модификация принтера" + msgid "Raft contact Z distance" msgstr "Зазор между подложкой и моделью" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Вертикальное расстояние между подложкой и моделью. Значение игнорируется при " "выборе растворимого материала." @@ -12687,13 +15537,13 @@ msgstr "" msgid "Raft expansion" msgstr "Расширение подложки" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Расширение всех слоёв подложки в плоскости XY." msgid "Initial layer density" msgstr "Плотность первого слоя" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "" "Плотность первого слоя поддержки или первого слоя подложки, если она " "включена." @@ -12701,26 +15551,26 @@ msgstr "" msgid "Initial layer expansion" msgstr "Расширение первого слоя" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Расширение первого слоя подложки или поддержки в плоскости XY для улучшения " -"адгезии с материалами склонными к отлипанию и закручиванию." +"адгезии при печати материалами, склонными к отлипанию и закручиванию." msgid "Raft layers" msgstr "Слоёв в подложке" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Параметр устанавливает высоту подложки в слоях, тем самым поднимая модель на " "заданное количество слоёв от стола. Используйте эту функцию, чтобы избежать " "деформации при печати ABS пластиком." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Разрешение G-кода. Максимальное отклонение экспортируемых в G-код путей до и " "после упрощения. Для нарезки и предпросмотра G-кода с очень высоким " @@ -12735,98 +15585,109 @@ msgstr "Порог перемещения для отката" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" -"Откат будет срабатывать только в том случае, если расстояние перемещения " +"Ретракт будет срабатывать только в том случае, если расстояние перемещения " "превысит этот порог." msgid "Retract amount before wipe" -msgstr "Величина отката перед очисткой" +msgstr "Величина ретракта перед очисткой" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"Длина быстрого отката перед очисткой, выраженная в процентах от общей длины " -"отката." +"Длина быстрого ретракта перед очисткой, выраженная в процентах от общей " +"длины ретракта." msgid "Retract when change layer" -msgstr "Откат при смене слоя" +msgstr "Ретракт при смене слоя" -msgid "Force a retraction when changes layer" -msgstr "Эта опция включает принудительный откат при переходе со слоя на слой." +msgid "Force a retraction when changes layer." +msgstr "" +"Эта опция включает принудительный ретракт при переходе со слоя на слой." msgid "Retraction Length" -msgstr "Длина отката" +msgstr "Длина оретракта" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Некоторое количество материала в экструдере откатывается назад, чтобы " -"избежать его течи при длительном перемещении. 0 - отключение отката." +"Некоторое количество материала в экструдере отводится назад, чтобы избежать " +"просачивания при длительном перемещении. Установите значение 0, чтобы " +"отключить ретракт." -msgid "Long retraction when cut(experimental)" -msgstr "Длинное втягивания перед отрезанием прутка" +msgid "Long retraction when cut (beta)" +msgstr "Длинный ретракт при отрезании филамента (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Экспериментальная функция. Втягивание и обрезка пластиковой нити на большем " -"расстоянии во время её замены для минимизации очистки. Хотя это значительно " -"уменьшает величину очистки, это может повысить риск засорения сопла или " -"вызвать другие проблемы при печати." +"Экспериментальная функция. Ретракт и обрезка филамента на большем расстоянии " +"во время её замены для минимизации очистки. Хотя это значительно уменьшает " +"величину очистки, это может повысить риск засорения сопла или вызвать другие " +"проблемы при печати." msgid "Retraction distance when cut" -msgstr "Длина втягивания перед отрезанием прутка" +msgstr "Длина ретракта при отрезании филамента" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Экспериментальная функция. Длина втягивания перед отрезанием пластиковой " -"нити при её смене." +"Экспериментальная функция. Длина ретракта перед отрезанием филамента при его " +"смене." -msgid "Z hop when retract" -msgstr "Подъём оси Z при откате" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Высота поднятия оси Z" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" -"Здесь задаётся на сколько миллиметров будет каждый раз приподниматься ось Z, " -"когда срабатывает откат. Это предотвращает задевание соплом печатаемой " -"модели при перемещении. Использование спирального типа подъёма оси Z может " -"предотвратить образование паутины." +"При каждом ретракте сопло немного приподнимается, создавая зазор между " +"соплом и моделью. Это предотвращает соприкосновение сопла с моделью при " +"перемещении. Использование спиральных линий для подъёма по оси Z позволяет " +"избежать застревания." -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Приподнимать ось Z только ниже" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Если указать положительное значение, ось Z будет подниматься только ниже " "(до) заданной здесь высоты (высота считается от стола). Таким образом вы " "можете запретить подъём оси Z выше установленной высоты." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Приподнимать ось Z только выше" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Если указать положительное значение, ось Z будет подниматься только выше " "(после) заданной здесь высоты (высота считается от стола). Таким образом вы " "можете отключить подъём оси Z при печати на первых слоях (в начале печати)." -msgid "Z hop type" +msgid "Z-hop type" msgstr "Тип подъёма оси Z" +msgid "Type of Z-hop." +msgstr "Тип подъема оси Z." + msgid "Slope" msgstr "Наклонный" @@ -12834,11 +15695,11 @@ msgid "Spiral" msgstr "Спиральный" msgid "Traveling angle" -msgstr "Угол подъёма" +msgstr "Угол перемещения" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" "Угол для наклонного и спирального подъёма оси Z. При 90° получаем «обычный» " "подъём." @@ -12869,7 +15730,7 @@ msgid "On surfaces" msgstr "На поверхностях" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Принудительное поднятие оси Z. На этот параметр влияют указанные выше " @@ -12887,6 +15748,18 @@ msgstr "Только на нижней" msgid "Top and Bottom" msgstr "На верхней и нижней" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Боуден" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Доп. длина подачи перед возобновлением печати" @@ -12894,44 +15767,40 @@ msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"После того как экструдер совершил откат и переместился в другое место " -"печати, происходит обратная подача того же количества материала + заданное " -"тут значение. Для увеличения длины выдавливания ставится положительное " -"значение (например 0.5 мм), для уменьшения отрицательное. Этот параметр " -"редко нуждается в правке." +"При компенсации ретракта после перемещения, экструдер выталкивает " +"дополнительное количество филамента. Эта настройка требуется редко." msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" -"Компенсация длины выдавливаемого пластика перед возобновлением печати после " -"смены сопла." +"При компенсации ретракта после смены инструмента экструдер выталкивает " +"дополнительное количество нити." msgid "Retraction Speed" -msgstr "Скорость извлечения при откате" +msgstr "Скорость ретракта" -msgid "Speed of retractions" -msgstr "Скорость извлечения материала при откате." +msgid "Speed for retracting filament from the nozzle." +msgstr "Скорость извлечения филамента из сопла." -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Скорость заправки при откате" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Скорость возврата материала при откате. Если оставить 0, будет " -"использоваться та же скорость что и при извлечении." +"Скорость заправки филамента в сопло. Ноль означает ту же скорость ретракта." msgid "Use firmware retraction" -msgstr "Исп. откат из прошивки" +msgstr "Использовать ретракт из прошивки" msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" "Эта экспериментальная опция использует команды G10 и G11, чтобы сама " -"прошивка обрабатывала откаты. Поддерживается только в последних версиях " +"прошивка обрабатывала ретракты. Поддерживается только в последних версиях " "Marlin." msgid "Show auto-calibration marks" @@ -12941,7 +15810,7 @@ msgid "Disable set remaining print time" msgstr "Откл. генерацию оставшегося времени печати" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Отключение генерации команды M73 - вывода оставшегося времени печати в " "конечный G-код." @@ -12949,7 +15818,7 @@ msgstr "" msgid "Seam position" msgstr "Позиция шва" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Начальная позиция для печати каждой части внешнего периметра." msgid "Nearest" @@ -12958,6 +15827,9 @@ msgstr "Ближайшая" msgid "Aligned" msgstr "Выровненная" +msgid "Aligned back" +msgstr "Выровненный сзади" + msgid "Back" msgstr "Сзади" @@ -13046,13 +15918,13 @@ msgstr "Скорость клиновидного шва" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Этот параметр задает скорость печати клиновидного шва. Рекомендуется " "печатать его на низкой скорости (менее 100 мм/с). Также рекомендуется " @@ -13082,10 +15954,10 @@ msgstr "" "слоя. Значение по умолчанию - 0." msgid "Scarf around entire wall" -msgstr "Клиновидный шов по всей стене" +msgstr "Клиновидный шов вдоль всего периметра" msgid "The scarf extends to the entire length of the wall." -msgstr "Клиновидный шов простирается на всю высоту стены." +msgstr "Клиновидный шов простирается по всей длине периметра." msgid "Scarf length" msgstr "Длина клиновидного шва" @@ -13094,8 +15966,9 @@ msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Длина клиновидного шва. Установка этого параметра на ноль фактически " -"отключает шарф." +"Длина клиновидного шва.\n" +"Максимальное расстояние, на которое будет растянут клиновидный шов. " +"Установка этого параметра на ноль фактически отключает клиновидный шов." msgid "Scarf steps" msgstr "Шагов клиновидного шва" @@ -13113,9 +15986,10 @@ msgid "Role base wipe speed" msgstr "Скорость очистки по типу экструзии" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "Скорость очистки будет определяться скоростью текущего типа экструзии, т.е " "если операция очистки выполняется сразу после экструзии внешнего периметра, " @@ -13135,15 +16009,15 @@ msgid "Wipe before external loop" msgstr "Очистка перед печатью внешнего периметра" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Чтобы минимизировать возможную переэкструзию в начале внешнего периметра при " "порядке печати «Внешний/Внутренний» или «Внутренний/Внешний/Внутренний», " @@ -13160,9 +16034,9 @@ msgstr "Скорость очистки" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "Скорость очистки определяется текущей настройкой. Если задано в процентах, " "то она вычисляться относительно скорости перемещения. 80% - значение по " @@ -13171,54 +16045,83 @@ msgstr "" msgid "Skirt distance" msgstr "Расстояние до юбки" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Расстояние между юбкой и каймой, или моделью." +msgid "Skirt start point" +msgstr "Начальная точка юбки" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Угол между центром модели и начальной точкой юбки. Угол 0 соответствует " +"самой правой позиции, положительный угол отсчитывается против часовой " +"стрелки." + msgid "Skirt height" msgstr "Слоёв юбки" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "Количество слоёв юбки. Обычно только один слой." +msgid "Single loop after first layer" +msgstr "Одинарная петля после первого слоя" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Ограничивает петли юбки/ветрозащитного экрана одной стенкой после первого " +"слоя. Иногда это полезно для экономии филамента, но может привести к " +"деформации/трещинам юбки/ветрозащитного экрана." + msgid "Draft shield" msgstr "Защитный кожух" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" "Защитный кожух полезен для защиты материалов типа ABS, ASA от деформации и " "отрыва от стола из-за внешнего воздушного потока. Обычно защитный кожух " -"необходим только для принтеров без камеры.\n" -"\n" -"Опции:\n" -"Включено - высота юбки равна высоте самой высокой модели.\n" -"Ограничено - высота юбки задается параметром «Слоёв юбки».\n" +"необходим только для принтеров без термокамеры.\n" "\n" +"Если включено, то высота юбки будет равна высоте самой высокой модели, иначе " +"используется значение «Слоёв юбки».\n" "Примечание: при включённом защитном кожухе, юбка будет печататься на " "расстоянии от модели, которое задаётся параметром «Расстояние до юбки». Если " -"активны кайма, она может пересекаться с юбкой. Чтобы избежать этого, " +"активна кайма, она может пересекаться с юбкой. Чтобы избежать этого, " "увеличьте значение «Расстояние до юбки».\n" -msgid "Limited" -msgstr "Ограничено" - msgid "Enabled" msgstr "Включено" +msgid "Skirt type" +msgstr "Тип юбки" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Выбор типа печатаемой юбки - одна общая для всех моделей или отдельные юбки " +"для каждой модели." + +msgid "Per object" +msgstr "Для каждой модели" + msgid "Skirt loops" msgstr "Петель юбки" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "Количество линий юбки вокруг модели. 0 - отключение юбки." msgid "Skirt speed" @@ -13230,22 +16133,27 @@ msgstr "Скорость печати юбки (мм/с). 0 - скорость msgid "Skirt minimum extrusion length" msgstr "Мин. длина экструзии юбки" -# ??? Конечное число петель юбки не учитывается при расстановке или проверке расстояния между моделями, поэтому если их недостаточно, то увеличьте их количество. msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"Минимальная длина экструзии в мм при печати юбки. 0 - функция отключена.\n" +"Минимальное количество пластика, которое должно быть выдавлено при печати " +"юбки в миллиметрах. 0 - функция отключена.\n" "\n" -"Использование ненулевого значения полезно, если принтер настроен на печать " -"без стартовой линии очистки сопла." +"Необходимо, если принтер настроен на печать без стартовой линии очистки " +"сопла.\n" +"При расстановке или проверке расстояния между моделями игнорируется конечное " +"число петель юбки, поэтому если их недостаточно, то увеличьте их количество." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Скорость печати в экспортированном G-коде будет замедлена, если расчётное " "время печати слоя меньше заданного здесь значения, для обеспечения лучшего " @@ -13256,27 +16164,33 @@ msgstr "Мин. порог разреженного заполнения" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Область с разреженным заполнением, размер которого меньше этого порогового " "значения, заменяется сплошным заполнением." +msgid "Solid infill" +msgstr "Сплошное заполнение" + +msgid "Filament to print solid infill." +msgstr "Филамент для печати сплошного заполнения." + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" "Ширина экструзии для внутреннего сплошного заполнения. Если задано в " -"процентах, то значение вычисляться относительно диаметра сопла." +"процентах, то значение вычисляется относительно диаметра сопла." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Скорость печати внутреннего сплошного заполнения, за исключением верхней и " "нижней поверхностей." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Печать пустотелых и тонкостенных моделей по спирали. Модель печатается в " "одну стенку без верхней поверхности, заполнения и поддержки. При этом сопло " @@ -13287,8 +16201,8 @@ msgid "Smooth Spiral" msgstr "Сглаживать спиральные контуры" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "Опция сглаживает перемещение по осям X и Y, в результате чего шов " "отсутствует даже в направлении XY на невертикальных периметрах." @@ -13296,14 +16210,49 @@ msgstr "" msgid "Max XY Smoothing" msgstr "Макс. сглаживание по XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Максимальное расстояние перемещения точек по XY для достижения плавной " -"спирали. Если задано в процентах, то значение вычисляться относительно " +"спирали. Если задано в процентах, то значение вычисляется относительно " "диаметра сопла." +# ??? Коэфф. потока первого витка +msgid "Spiral starting flow ratio" +msgstr "Коэфф. потока в начале спиральной вазы" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Обычно при печати спиральной вазы поток первого витка увеличивается от 0% до " +"100%, что в некоторых случаях может привести к недоэкструзии в начале " +"спирали.\n" +"Этот коэффициент позволяет изменить поток в начале спиральной вазы, чтобы " +"избежать подобных проблем." + +# ??? Коэфф. потока последнего витка +# Коэфф. потока последней спирали +msgid "Spiral finishing flow ratio" +msgstr "Коэфф. потока в конце спиральной вазы" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Обычно при печати спиральной вазы поток последнего витка уменьшается от 100% " +"до 0%, что в некоторых случаях может привести к недоэкструзии в конце " +"спирали.\n" +"Этот коэффициент позволяет изменить поток в конце спиральной вазы, чтобы " +"избежать подобных проблем." + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " @@ -13320,35 +16269,71 @@ msgstr "" "ускоренное видео. Если включён плавный режим, то после печати каждого слоя " "головка перемещается к лотку для удаления излишков, а уже затем делается " "снимок. Очистка сопла на черновой башне обязательна, т.к. при плавном режиме " -"возможно вытекание материалы из сопла когда делается снимок." +"возможно вытекание материала из сопла когда делается снимок." msgid "Traditional" msgstr "Обычный" msgid "Temperature variation" -msgstr "Колебания температуры" +msgstr "Разница температур" + +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Разница температур, которая будет применяться, когда экструдер не активен. " +"Значение не используется, если для параметра «Температура " +"ожидания» ('idle_temperature') в настройках филамента установлено ненулевое " +"значение." + +msgid "Preheat time" +msgstr "Время преднагрева" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Чтобы сократить время ожидания после смены инструмента, Orca может " +"предварительно нагреть следующий инструмент, пока используется текущий. Эта " +"настройка задает время в секундах для преднагрева следующего инструмента. " +"Orca вставит команду M104 для преднагрева инструмента." + +msgid "Preheat steps" +msgstr "Шагов преднагрева" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Задание нескольких команд преднагрева (например, M104.1). Полезно только для " +"Prusa XL. Для других принтеров установите значение 1." msgid "Start G-code" msgstr "Стартовый G-код" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Команды в G-коде, которые выполняются в самом начале печати." -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "" "Команды в G-коде, которые выполняются при запуске печати с этой пластиковой " "нитью." +# было Одиночный мультиматериальный экструдер msgid "Single Extruder Multi Material" -msgstr "Одноэкструдерный ММ принтер" +msgstr "Одиночный ММ экструдер" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" -"Использование одной экструзионной головы для печати несколькими видами/" -"цветами пластика." +"Принтер способный печатать несколькими филаментами через один хотэнд с " +"применением автоматической система подачи филамента (AMS)." msgid "Manual Filament Change" -msgstr "Ручная смена прутка" +msgstr "Ручная смена филамента" msgid "" "Enable this option to omit the custom Change filament G-code only at the " @@ -13357,27 +16342,27 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"Включите этот параметр, чтобы пропустить пользовательский G-код смены " -"пластиковой нити с самого начала печати. Команда смены инструмента будет " -"пропускаться на протяжении всей печати. Полезно при мультиматериальной " -"печати при ручной замене пластиковой нити, где для этого используются " -"команды M600/PAUSE." +"Включите эту опцию, чтобы исключить пользовательский G-код «Замена " +"филамента» только в начале печати. ​​Команда смены экструдера (например, T0) " +"будет пропущена на протяжении всей печати. ​​Это полезно при ручной печати " +"несколькими материалами, где для запуска операции ручной замены филамента " +"используется команда M600/PAUSE." msgid "Purge in prime tower" msgstr "Очистка в черновую башню" -msgid "Purge remaining filament into prime tower" -msgstr "Очистка сопла от остатков материала в черновую башню" +msgid "Purge remaining filament into prime tower." +msgstr "Очистка сопла от остатков материала в черновую башню." msgid "Enable filament ramming" -msgstr "Включить рэмминг прутка" +msgstr "Включить рэмминг филамента" msgid "No sparse layers (beta)" msgstr "Без разреженных слоёв (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -13454,7 +16439,7 @@ msgstr "" "положительное, например 0.3) или ниже (если значение отрицательное, например " "-0.3) относительно стола 3D принтера. Используется для компенсации слишком " "малого или слишком большого расстояния от сопла до стола на первом слое, вне " -"зависимости от причины почему оно такое большое или маленькое." +"зависимости от причины." msgid "Enable support" msgstr "Включить поддержку" @@ -13463,33 +16448,39 @@ msgid "Enable support generation." msgstr "Включить генерацию поддержки." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" "Тип поддержки «Обычная (авто)» и «Древовидная (авто)» используются для " "автоматического создания поддержки. Если выбран тип поддержки «Обычная " "(вручную)» или «Древовидная (вручную)», генерируется только принудительная " "поддержка." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "Обычная (авто)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "Древовидная (авто)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "Обычная (вручную)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "Древовидная (вручную)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Зазор между моделью и поддержкой по XY" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Зазор между моделью и поддержкой по осям XY." +msgid "Support/object first layer gap" +msgstr "Зазор между моделью и поддержкой на первом слое" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Зазор между моделью и поддержкой по осям XY на первом слое." + msgid "Pattern angle" msgstr "Угол шаблона поддержки" @@ -13501,7 +16492,7 @@ msgstr "" msgid "On build plate only" msgstr "Поддержка только от стола" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Создавать поддержку только от стола." msgid "Support critical regions only" @@ -13514,25 +16505,23 @@ msgstr "" "Создание поддержек только для критических областей, включая острые концы, " "консоли (горизонтально выступающие элементы) и т.д." -msgid "Remove small overhangs" -msgstr "Игнорировать небольшие нависания" - -msgid "Remove small overhangs that possibly need no supports." +msgid "Ignore small overhangs" +msgstr "" + +msgid "Ignore small overhangs that possibly don't require support." msgstr "" -"Не печатать поддержку под небольшими нависаниями, которые, как вам казалось, " -"нуждаются в них." msgid "Top Z distance" msgstr "Зазор поддержки сверху" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" "Вертикальное расстояние между связующим слоем поддержки сверху и моделью." msgid "Bottom Z distance" msgstr "Зазор поддержки снизу" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "" "Вертикальное расстояние между связующим слоем поддержки снизу и моделью." @@ -13541,18 +16530,19 @@ msgstr "Базовая поддержка/подложка" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Пластиковая нить для печати базовой поддержки и подложки. Значение «По " -"умолчанию» означает, что для поддержки используется текущая пластиковая нить." +"Филамент для печати базовой поддержки и подложки. Значение «По умолчанию» " +"означает, что для поддержки используется текущий филамент." msgid "Avoid interface filament for base" -msgstr "Избегать исп. связующего прутка для тела поддержки" +msgstr "Избегать пересечения филамента с основанием поддержки" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Избегать использования прутка связующего слоя поддержки для тела поддержки." +"По возможности избегать пересечение филамента с основанием поддержки при " +"печати." msgid "" "Line width of support. If expressed as a %, it will be computed over the " @@ -13564,33 +16554,34 @@ msgstr "" msgid "Interface use loop pattern" msgstr "Связующий слой петлями" +# ??? Печатать контактный слой связующего слоя поддержки петлями msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Печатать контактный слой связующего слоя поддержки петлями. По умолчанию " -"отключено." +"Печатать по периметру последнего связующего слоя поддержки непрерывную " +"полилинию. По умолчанию отключено. Устаревшая функция, которая не всегда " +"работает корректно." msgid "Support/raft interface" msgstr "Связующий слой поддержки/подложки" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" -"Пластиковая нить для печати связующего слоя поддержки. Значение «По " -"умолчанию» означает, что для связующего слоя поддержки используется текущая " -"пластиковая нить." +"Филамент для печати связующего слоя поддержки. Значение «По умолчанию» " +"означает, что для связующего слоя поддержки используется текущий филамент." msgid "Top interface layers" msgstr "Связующих слоёв сверху" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Количество связующих слоёв сверху." msgid "Bottom interface layers" msgstr "Связующих слоёв снизу" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Количество связующих слоёв снизу." msgid "Same as top" @@ -13599,26 +16590,29 @@ msgstr "Как и сверху" msgid "Top interface spacing" msgstr "Расстояние между линиями связующего слоя сверху" -msgid "Spacing of interface lines. Zero means solid interface" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." msgstr "" -"Расстояние между линиями связующего слоя сверху. Установите 0, чтобы " -"получить сплошной слой." +"Расстояние между линиями связующего слоя. Ноль означает сплошной слой.\n" +"Принудительное использование сплошного связующего слоя при включенной " +"поддержке глажения." msgid "Bottom interface spacing" msgstr "Расстояние между линиями связующего слоя снизу" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Расстояние между линиями связующего слоя снизу. Установите 0, чтобы получить " "сплошной слой." -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Скорость печати связующего слоя поддержки." msgid "Base pattern" msgstr "Шаблон поддержки" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Шаблон печати поддержки." msgid "Rectilinear grid" @@ -13633,7 +16627,7 @@ msgstr "Шаблон связующего слоя" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Шаблон, по которому будет происходить печать связующего слоя поддержки. При " "выборе по умолчанию, шаблон для нерастворимой связующей поддержки - " @@ -13645,18 +16639,18 @@ msgstr "Прямолинейный (чередование направлени msgid "Base pattern spacing" msgstr "Плотность поддержки" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Расстояние между линиями поддержки." msgid "Normal Support expansion" msgstr "Горизонтальное расширение поддержки" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" "Горизонтальное расширение (+) или сужение (-) базовой поддержки в плоскости " "XY." -msgid "Speed of support" +msgid "Speed of support." msgstr "Скорость печати поддержки." msgid "" @@ -13670,7 +16664,7 @@ msgid "" msgstr "" "Стиль и форма создаваемой поддержки.\n" "\n" -"Стиль «Сетка» создаёт более устойчивые опоры (по умолчанию). Стиль " +"Стиль «Сетка» создаёт более устойчивую поддержку (по умолчанию). Стиль " "«Аккуратный» экономит материал и уменьшает образование дефектов на моделях.\n" "\n" "Для древовидной поддержки, при стройном и органическом стиле происходит " @@ -13678,9 +16672,15 @@ msgstr "" "органический). В то время как гибридный стиль создаёт структуру, схожую с " "обычную поддержкой при больших плоских нависаниях." +msgid "Default (Grid/Organic)" +msgstr "По умолчанию (сетка/органический)" + msgid "Snug" msgstr "Аккуратный" +msgid "Organic" +msgstr "Органический" + msgid "Tree Slim" msgstr "Стройный (древ. поддержка)" @@ -13690,15 +16690,12 @@ msgstr "Крепкий (древ. поддержка)" msgid "Tree Hybrid" msgstr "Гибридный (древ. поддержка)" -msgid "Organic" -msgstr "Органический" - msgid "Independent support layer height" msgstr "Независимая высота слоя поддержки" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Слои поддержки будут иметь высоту слоя, отличную от высоты слоя модели. Это " @@ -13715,12 +16712,32 @@ msgstr "" "Для нависаний, угол наклона которых ниже заданного порогового значения, " "будут использоваться поддержки." +# ??? Порог перекрытия периметров +msgid "Threshold overlap" +msgstr "Порог перекрытия для поддержки" + +# ????? Если «Пороговый угол поддержки» равен нулю, поддержка будет создаваться только там, где верхний слой висит в воздухе слишком сильно, т.е. его перекрытие с нижним слоем меньше заданного тут порога. Чем меньше значение, тем более крутые нависания можно печатать без поддержек. +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Задаёт порог перекрытия периметров для генерации поддержки.\n" +"Если «Пороговый угол поддержки» равен нулю, поддержка будет создаваться для " +"нависающих участков, где верхний периметр опирается на нижний менее чем на " +"заданный процент своей ширины. Чем меньше значение этого параметра, тем " +"более крутые нависания можно напечатать без поддержки.\n" +"\n" +"Например, при значении 15% поддержка добавится, если верхний периметр лежит " +"на нижнем меньше чем на 15% своей ширины, что при ширине линии 0.4 мм " +"составляет 0.06 мм." + msgid "Tree support branch angle" msgstr "Угол нависания ветвей древовидной поддержки" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Этот параметр определяет максимальный угол нависания ветвей древовидной " @@ -13766,29 +16783,19 @@ msgstr "" "сложнее удалять, поэтому рекомендуется вместо высокого значения плотности " "ветвей включать связующие слои поддержки." -msgid "Adaptive layer height" -msgstr "Переменная высота слоёв" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Включение автоматического расчёта высоты слоя древовидной поддержки, кроме " -"первого слоя. " - msgid "Auto brim width" msgstr "Автоширина каймы" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Включение автоматического расчёта ширины каймы для древовидной поддержки." msgid "Tree support brim width" msgstr "Ширина каймы древовидной поддержки" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "Расстояние от древовидной поддержки до внешней линии каймы." msgid "Tip Diameter" @@ -13822,91 +16829,149 @@ msgstr "" "по всей своей длине. Небольшой угол может повысить устойчивость органической " "поддержки." -msgid "Branch Diameter with double walls" -msgstr "Диаметр ветвей с двойными стенками" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Ветви, толщина которых больше указанного диаметра, будут напечатаны с " -"двойными стенками для прочности. Установите 0, если двойные стенки у ветвей " -"не нужны." - msgid "Support wall loops" msgstr "Периметров поддержки" -msgid "This setting specify the count of walls around support" -msgstr "Этот параметр определяет количество периметров у печатаемой поддержки." +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Этот параметр задаёт количество периметров поддержки в диапазоне [0,2]. 0 - " +"автоматический выбор." msgid "Tree support with infill" msgstr "Древовидная поддержка с заполнением" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Этот параметр определяет, следует ли заполнять большие полости внутри " "древовидной поддержки." +# Разглаживать верхний слой поддержки +msgid "Ironing Support Interface" +msgstr "Разглаживать связующий слой поддержки" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"Включение разглаживания связующего слоя поддержки с помощью горячего сопла " +"для получения гладкой поверхности. После печати связующего слоя поддержки " +"сопло пройдётся по нему ещё раз, но с значительно меньшей скоростью и " +"потоком." + +msgid "Support Ironing Pattern" +msgstr "Шаблон разглаживания поддержки" + +msgid "Support Ironing flow" +msgstr "Поток разглаживания поддержки" + +# ??? +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"Количество материала, которое необходимо выдавить во время разглаживания, " +"относительно потока нормальной высоты связующего слоя поддержки." + +msgid "Support Ironing line spacing" +msgstr "Расстояние между линиями разглаживания поддержки" + msgid "Activate temperature control" msgstr "Вкл. контроль температуры" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Для контроля температуры в камере принтера включите эту опцию. Команда M191 " -"будет добавлена перед стартовый G-кодом принтера (machine_start_gcode).\n" -"G-код команда: M141/M191 S(0-255)" +"Для автоматического поддержания температуры внутри термокамеры принтера " +"включите эту опцию. Эта опция активирует отправку команды M191 перед " +"стартовым G-кодом принтера (machine_start_gcode)\", которая устанавливает " +"температуру внутри термокамеры и ждёт её достижения. Так же, она отправляет " +"команду M141 в конце печати, чтобы отключить нагреватель камеры, если он " +"есть.\n" +"\n" +"Эта опция зависит от поддержки прошивкой команд M191 и M141, либо через " +"макросы, либо нативно, и обычно используется, когда имеется активный " +"нагреватель камеры." msgid "Chamber temperature" msgstr "Температура в термокамере" -# ??? msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Более высокая температура в камере может помочь уменьшить или даже исключить " -"коробление материала. Так же это улучшает межслойное соединения у " -"высокотемпературных материалов, таких как ABS, ASA, PC, PA и т.д. (в то же " -"время фильтрация воздуха при печати ABS и ASA сделает её хуже). Для " -"низкотемпературных материалов, таких как PLA, PETG, TPU, PVA и т. д., " -"фактическая температура в камере не должна быть слишком высокой, чтобы " -"избежать засорения сопла, поэтому настоятельно рекомендуется установить " -"температуру в камере равной 0°C." +"Для высокотемпературных материалов, таких как ABS, ASA, PC и PA, более " +"высокая температура внутри термокамеры может помочь уменьшить или даже " +"исключить коробление материала, и потенциально привести к повышению " +"прочности межслойного соединения. Однако в то же время более высокая " +"температура камеры снижает эффективность фильтрации воздуха при печати ABS и " +"ASA.\n" +"\n" +"Для PLA, PETG, TPU, PVA и других низкотемпературных материалов этот параметр " +"следует отключить, поскольку температура внутри термокамеры должна быть " +"низкой, чтобы избежать засорения хотэнда из-за размягчения материала в " +"термобарьере.\n" +"\n" +"При включении параметра также создаёт переменная G-кода с именем " +"chamber_temperature. Её можно использовать в макросах начала печати или " +"прогрева термокамеры, например:\n" +"PRINT_START [другие_переменные] CHAMBER_TEMP=[chamber_temperature].\n" +"Это особенно полезно, если принтер не поддерживает команды M141/M191, или " +"если управление температурой термокамеры реализовано через макросы " +"(например, при отсутствии активного нагревателя камеры)." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Температура сопла при печати для слоёв после первого." msgid "Detect thin wall" -msgstr "Обнаружение тонких стенок" +msgstr "Обнаруживать тонкие стенки" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Обнаружение тонких стенок (стенки одинарной ширины), которые можно " "напечатать только в один проход экструдера. Возможно, будет напечатано не " "очень хорошо, так как это не замкнутый контур." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" -"Команды в G-коде, которые выполняются для ручной смены пластиковой нити " -"(цвета\\типа), включая команду T для запуска смены инструмента." +"Этот G-код вставляется при смене филамента, включая T-команды для запуска " +"смены печатающей головки." -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" "Команды в G-коде, которые выполняются при смене роли экструзии (т.е. " "например, от печати периметра к заполнению)." @@ -13918,7 +16983,7 @@ msgstr "" "Ширина экструзии для верхней поверхности. Если задано в процентах, то " "значение вычисляться относительно диаметра сопла." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Скорость печати верхних сплошных поверхностей." msgid "Top shell layers" @@ -13927,7 +16992,7 @@ msgstr "Сплошных слоёв сверху" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Количество сплошных слоёв при печати верхней поверхности модели. Если " "толщина, рассчитанная с помощью этого значения, меньше толщины оболочки " @@ -13943,8 +17008,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Минимальная толщина оболочки сверху в мм. Если толщина оболочки, " "рассчитанная по количеству сплошных слоёв сверху, меньше этого значения, " @@ -13954,46 +17019,78 @@ msgstr "" "параметр отключён, а толщина оболочки сверху полностью задаётся количеством " "сплошных слоёв снизу." -msgid "Speed of travel which is faster and without extrusion" +# ??? Плотность верхней оболочки +msgid "Top surface density" +msgstr "Плотность верхней поверхности" + +# ??? Плотность верхней поверхности. При 100% создаётся сплошной верхний слой. +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Плотность верхней поверхности. Если установить 100%, поверхность будет " +"сплошной и гладкой. Уменьшение этого параметра создаст текстурированную " +"поверхность в соответствии с выбранным шаблоном заполнения верхней " +"поверхности. При значении 0% останутся только стенки верхнего слоя. Эта " +"функция предназначена для улучшения внешнего вида или функциональности " +"объекта, но не для решения проблем, таких как чрезмерная экструзия." + +msgid "Bottom surface density" +msgstr "Плотность нижней поверхности" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Плотность нижнего поверхностного слоя. Предназначена для эстетических или " +"функциональных целей, а не для устранения таких проблем, как чрезмерное " +"переэкструзия.\n" +"ВНИМАНИЕ: Уменьшение этого значения может отрицательно повлиять на адгезию к " +"слою." + +msgid "Speed of travel which is faster and without extrusion." msgstr "Скорость перемещения экструдера при позиционировании без печати." msgid "Wipe while retracting" -msgstr "Очистка сопла при откате" +msgstr "Очистка сопла при ретракте" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"Если включено, то во время отката сопло продолжит движение вдоль периметра " +"Если включено, то во время ретракта сопло продолжит движение вдоль периметра " "модели, чтобы очистить его от вытекшего материала. Это может снизить " "появление дефектов (каплей, пупырышек) при печати нового участка после " "перемещения." -# ??????? Расстояние очистки внешней стенки msgid "Wipe Distance" msgstr "Расстояние очистки" +# ??? Установка значения в приведенном ниже параметре «Величина отката перед очисткой», приведёт к дополнительному втягиванию на заданную тут величину, в противном случае оно будет выполнено после. msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" -"Задаёт расстояние перемещения, добавленное после печати последнего участка " -"пути при совершении отката.\n" +"Опишите, как долго сопло будет двигаться по последнему пути при ретракте.\n" "\n" -"В зависимости от продолжительности операция очистки, заданной скорости и " -"величины отката экструдера/прутка, может потребоваться движение отката, " -"чтобы втянуть оставшийся материал. \n" +"В зависимости от продолжительности операции протирки, а также от настроек " +"скорости и длительности отвода экструдера/филамента, может потребоваться " +"ретракт оставшегося филамента.\n" "\n" -"Установка значения в приведенном ниже параметре «Величина отката перед " -"очисткой» приведёт к выполнению дополнительного отката перед очисткой, в " -"противном случае это будет выполнено после." +"Установка значения величины ретракта перед ретрактом ниже приведет к " +"выполнению избыточного ретракта до очистки, в противном случае он будет " +"выполнен после." msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " @@ -14006,6 +17103,12 @@ msgstr "" "поверхности печатаемой модели. В основном она используется для многоцветной " "и мультиматериальной печати в многоинструментальных принтерах." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Объём очистки" @@ -14020,13 +17123,14 @@ msgstr "" "очистки указанные в таблице." msgid "Prime volume" -msgstr "Объём сброса на черновой башни" +msgstr "Объём сброса материала на черновой башни" msgid "The volume of material to prime extruder on tower." msgstr "" -"Объём выдавленного материала для заправки экструдера на черновой башне." +"Объём материала, который необходимо выдавить для подготовки экструдера на " +"черновой башне." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "" "Размер черновой башни по оси X. Размер по оси Y будет автоматически вычислен " "исходя из необходимого объёма очистки и ширины башни. Таким образом, " @@ -14035,9 +17139,14 @@ msgstr "" msgid "Wipe tower rotation angle" msgstr "Угол поворота черновой башни" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "Угол поворота черновой башни относительно оси X." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Угол вершины стабилизирующего конуса" @@ -14049,16 +17158,9 @@ msgstr "" "предотвращения опрокидывания черновой башни. Больший угол означает более " "широкое основание конуса." -msgid "Wipe tower purge lines spacing" -msgstr "Расстояние между линиями очистки черновой башни" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Расстояние между линиями очистки на черновой башне." - msgid "Maximum wipe tower print speed" msgstr "Макс. скорость печати черновой башни" -# ?????? msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " "tower sparse layers. When purging, if the sparse infill speed or calculated " @@ -14073,27 +17175,75 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" -"Максимальная скорость печати при очистке в черновую башню и печати " -"разреженных слоёв черновой башни. \n" +"Максимальная скорость печати при очистке в черновую башню и печати её " +"разреженных слоёв.\n" +"Во время очистки программа сопоставляет скорость разреженного заполнения и " +"скорость, рассчитанную по 'максимальному объёмному расходу', и использует " +"наименьшую.\n" +"При печати разреженных слоёв программа сопоставляет скорость внутренних " +"периметров и скорость, рассчитанную по 'максимальному объёмному расходу', и " +"также использует наименьшую.\n" "\n" "Увеличение этой скорости может повлиять на устойчивость башни, а также " -"увеличить силу столкновения сопла с каплями, которые могут образовываться на " -"черновой башне.\n" +"увеличить силу, с которой сопло сталкивается с любыми наплывами, которые " +"могли образоваться на черновой башне.\n" "\n" -"Прежде чем увеличивать этот параметр выше установленного по умолчанию " -"значения 90 мм/с, убедитесь, что ваш принтер способен работать на повышенных " -"скоростях и что образование соплей при смене инструмента хорошо " -"контролируется." +"Перед увеличением этого параметра выше значения по умолчанию 90 мм/с " +"убедитесь, что ваш принтер может надежно строить мосты на повышенных " +"скоростях и что отсутствует подтекание при смене инструмента.\n" +"\n" +"Для внешних периметров черновой башни всегда используется скорость " +"внутренних периметров, независимо от значения данного параметра." -msgid "Wipe tower extruder" -msgstr "Экструдер черновой башни" +msgid "Wall type" +msgstr "Тип стенки черновой башни" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Тип внешней стенки черновой башни.\n" +"1. Прямоугольник с фиксированной шириной и высотой. Установлено по " +"умолчанию.\n" +"2. Конус с выступом в нижней части для повышения устойчивости.\n" +"3. Рёбра жесткости, которые добавляются по четырём углам чернотой башни для " +"повышения устойчивости." + +msgid "Extra rib length" +msgstr "Дополнительная длина ребра" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Положительное значение может увеличить длину ребра, а отрицательное - " +"уменьшить. Однако она не может быть меньше размера, определяемого объёмом " +"очистки." + +msgid "Rib width" +msgstr "Ширина ребра" + +msgid "Rib width." +msgstr "Ширина ребра." + +# ??? Скругление углов стенки +msgid "Fillet wall" +msgstr "Скругление стенки" + +msgid "The wall of prime tower will fillet." +msgstr "Стенка главной башни будет скруглена." msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -14114,6 +17264,18 @@ msgstr "" "башню для прочистки сопла при смене экструдеров/инструментов. Эти значения " "используются для упрощения создания полноты объёмов очистки указанной ниже." +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -14135,8 +17297,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Эта модель будет использоваться для очистки сопла после смены материала для " "его экономии и сокращения времени печати. В результате цвета будут " @@ -14150,13 +17312,45 @@ msgid "Maximal distance between supports on sparse infill sections." msgstr "" "Максимальное расстояние моста черновой башни на её разряженных участках." +msgid "Wipe tower purge lines spacing" +msgstr "Расстояние между линиями очистки черновой башни" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Расстояние между линиями очистки на черновой башне." + +msgid "Extra flow for purging" +msgstr "Дополнительный поток для очистки" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Регулирует количество пластика, которое будет использоваться для очистки на " +"черновой башенке. Делает линии шире или уже по сравнению с тем, что " +"выставлено в «Мин. объём сброса на черновой башне». Расстояние между линиями " +"пересчитывается автоматически." + +msgid "Idle temperature" +msgstr "Температура ожидания" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Температура сопла в момент, когда для печати используется другое сопло. Этот " +"параметр используется только в том случае, если в настройках печати активна " +"функция «Предотвращение течи материала». Установите 0 для отключения." + msgid "X-Y hole compensation" msgstr "Компенсация размера отверстий по XY" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Отверстия модели будут увеличены или уменьшены в плоскости XY на заданное " "значение. Положительное значение увеличивает отверстия, отрицательное - " @@ -14167,10 +17361,10 @@ msgid "X-Y contour compensation" msgstr "Компенсация размера модели по XY" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Параметр отвечает за смещение всех полигонов модели в плоскости XY на " "заданное значение. Положительное значение увеличивает модель, отрицательное " @@ -14198,7 +17392,7 @@ msgstr "Предел обнаружения" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -14229,19 +17423,19 @@ msgstr "Формат эскизов G-кода" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Формат эскизов G-кода: PNG для наилучшего качества, JPG для наименьшего " -"размера, QOI для прошивки с малым объемом памяти." +"размера, QOI для прошивки с малым объёмом памяти." msgid "Use relative E distances" msgstr "Относительные координаты экструдера" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "Относительная экструзия рекомендуется при использовании опции «Помечать " "объекты». Некоторые экструдеры работают лучше при отключении этой опции " @@ -14252,34 +17446,35 @@ msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Движок классического генератора периметров создаёт их с постоянной шириной " "экструзии, а для очень тонких участков используется параметр «Заполнять " -"щели». Движок Arachne же создаёт периметры с переменной шириной экструзии, " -"что позволяет печатать без щелей, лучше пропечатывать мелкие элементы (при " -"условии, что у вас правильно откалиброван LA/PA)." - -msgid "Classic" -msgstr "Классический" +"щели».\n" +"\n" +"Движок Arachne же создаёт периметры с переменной шириной экструзии, что " +"позволяет печатать без щелей, лучше пропечатывать мелкие элементы (при " +"условии, что у вас правильно откалиброван LA/PA). Этот параметр также влияет " +"на концентрическое заполнение." msgid "Arachne" msgstr "Arachne" msgid "Wall transition length" -msgstr "Длина перехода к периметру" +msgstr "Длина перехода между периметрами" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" -"При переходе между разным количеством периметров по мере того, как деталь " -"становится тоньше, выделяется определенное пространство для разделения или " -"соединения линий периметров. Выражается в процентах от диаметра сопла." +"Этот параметр задаёт длину перехода между периметрами при изменении их " +"количества (с чётного на нечётное, и обратно). Чем больше значение, тем " +"плавнее переход, и наоборот: чем меньше, тем резче. Если задано в процентах, " +"то значение вычисляется относительно диаметра сопла." msgid "Wall transitioning filter margin" -msgstr "Поле фильтра при переходе между периметрами" +msgstr "Граница фильтрации переходов между периметрами" msgid "" "Prevent transitioning back and forth between one extra wall and one less. " @@ -14288,17 +17483,14 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"Предотвращает переход туда и обратно между одним лишним периметром и одним " -"недостающим. Это поле расширяет диапазон значений ширины экструзии, который " -"определяется как [Минимальная ширина периметра - Поле, 2 * Минимальная " -"ширина периметра + Поле]. Расширение этого поля позволяет сократить " -"количество переходов, что в свою очередь позволяет сократить количество " -"запусков/остановок экструдирования и время перемещения. Однако большой " -"разброс значений ширины экструзии может привести к проблемам недо/" -"переэкструзии материала. Если задано в процентах, то расчёт производится " -"относительно диаметра сопла." +"Параметр расширяет допустимый диапазон значений ширины периметров, чтобы " +"уменьшить частые изменения их количества на тонких стенках, что улучшает " +"качество печати. Однако слишком большой диапазон может привести к " +"недоэкструзии или переэкструзии. Если параметр задан в процентах, его " +"значение вычисляется относительно диаметра сопла. Например, для сопла 0,4 мм " +"оптимальным считается значение 25% (0,1 мм)." msgid "Wall transitioning threshold angle" msgstr "Пороговый угол перехода между периметрами" @@ -14308,39 +17500,44 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"Когда требуется создавать переходы между чётным и нечётным количеством " -"периметров. Клиновидная форма с углом, превышающим этот параметр, не будет " -"иметь переходов, и периметры не будут напечатаны в центре для заполнения " -"оставшегося пространства. Уменьшение значения этого параметра позволяет " -"сократить количество и длину этих центральных периметров, но при этом могут " -"остаться зазоры или произойти чрезмерное экструдирование." +"Этот параметр задаёт минимальный угол между периметрами, при котором " +"требуется создавать переход между чётным и нечётным их количеством. Если " +"угол в клиновидной зоне, то есть в месте схождения периметров, превышает " +"заданное значение, переходы не генерируются, и в центре клина не будут " +"печататься дополнительные периметры для заполнения пустоты. Если же угол " +"меньше заданного значения, слайсер добавит переход и дополнительный периметр " +"в клиновидной зоне, чтобы заполнить оставшуюся пустоту." msgid "Wall distribution count" -msgstr "Счётчик распределений по периметрам" +msgstr "Количество изменяемых периметров" +# Т.е. если значение этого параметра задано как 1, а на участке модели 3 периметра, то только самый внутренний периметр будет печататься с переменной толщиной, а 2 оставшихся — с постоянной. msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" -"Количество периметров, отсчитываемое от центра, на которые необходимо " -"распространить изменения. Более низкое значение означает, что ширина внешних " -"периметров не изменяется." +"Количество периметров, отсчитываемое от заполнения, на которые будут " +"распространяться изменения, вносимые генератором периметров Arachne. Если " +"значение параметра низкое (например, 1), то только первый периметр от " +"заполнения будет печататься с переменной толщиной, а все остальные периметры " +"(второй, третий и т.д.) — с фиксированной шириной, заданной в настройках " +"слайсера (например, 0.45 мм для сопла 0.4 мм)." msgid "Minimum feature size" msgstr "Минимальный размер элемента" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Минимальная толщина тонких элементов. Элементы модели, которые тоньше этого " -"значения, не будут напечатаны, в то время как элементы, толщина которых " -"превышает «Минимальный размер элемента», будут расширены до минимальной " -"ширины периметра. Выражается в процентах от диаметра сопла." +"Минимальная толщина тонких элементов. Элементы модели, толщина которых " +"меньше этого значения, не будут напечатаны, а элементы, толщина которых " +"больше этого значения, будут расширены до минимальной ширины стенки. Она " +"выражается в процентах от диаметра сопла." msgid "Minimum wall length" msgstr "Минимальная длина периметра" @@ -14350,9 +17547,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Отрегулируйте это значение, чтобы предотвратить печать коротких незамкнутых " @@ -14365,7 +17562,7 @@ msgstr "" "настроить чувствительность определения верхней поверхности. «Порог одного " "периметра» будет отображаться только в том случае, если этот параметр " "установлен выше значения по умолчанию, равным 0,5 или если включён параметр " -"«Только один периметр на верхней поверхности».ы" +"«Только один периметр на верхней поверхности»." msgid "First layer minimum wall width" msgstr "Минимальная ширина периметра первого слоя" @@ -14386,7 +17583,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Ширина периметра, которая заменит тонкие элементы (в соответствии с " "минимальным размера элемента) модели. Если минимальная ширина периметра " @@ -14398,14 +17595,14 @@ msgid "Detect narrow internal solid infill" msgstr "Обнаруживать узкую область сплошного заполнения" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"Этот параметр автоматически определяет узкую внутреннюю область сплошного " -"заполнения. Если включено, для ускорения печати будет использоваться " -"концентрический шаблон. В противном случае по умолчанию используется " -"прямолинейный шаблон." +"Автоопределение узких сплошных областей для заполнения. Если включено, то " +"для ускорения печати они будут заполняться концентрическим шаблоном " +"заполнения. В противном случае по умолчанию используется прямолинейный " +"шаблон заполнения." msgid "invalid value " msgstr "недопустимое значение " @@ -14419,29 +17616,164 @@ msgstr "слишком большая ширина экструзии " msgid " not in range " msgstr " вне диапазона " +msgid "Export 3MF" +msgstr "Экспорт в 3MF" + +msgid "Export project as 3MF." +msgstr "Экспорт проекта в 3MF." + +msgid "Export slicing data" +msgstr "Экспорт данных о нарезке" + +msgid "Export slicing data to a folder." +msgstr "Экспорт данных о нарезке в папку." + +# ???? Загрузка нарезанных данных +msgid "Load slicing data" +msgstr "Загрузка данных о нарезке" + +msgid "Load cached slicing data from directory." +msgstr "Загрузка кэшированных данных о нарезке из папки." + +msgid "Export STL" +msgstr "Экспорт в STL" + +msgid "Export the objects as single STL." +msgstr "Экспорт моделей в единый STL-файл." + +msgid "Export multiple STLs" +msgstr "Экспорт в отдельные STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Экспорт моделей в папку в отдельные STL-файлы." + +msgid "Slice" +msgstr "Нарезать" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Нарезать столы: 0 - все, i - стол i, другие - недопустимо" + +msgid "Show command help." +msgstr "Показать справку по команде." + +msgid "UpToDate" +msgstr "Актуальная версия" + +# ????? Обновить значения конфигурации +msgid "Update the config values of 3MF to latest." +msgstr "Обновить значения профилей 3MF файла до актуальных." + +msgid "downward machines check" +msgstr "проверка совместимости принтера" + +# ??? +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "проверка совместимости текущего принтера с принтерами из списка." + +# ??? +msgid "Load default filaments" +msgstr "Загрузить материал по умолчанию" + +msgid "Load first filament as default for those not loaded." +msgstr "Загрузить первый материал по умолчанию для тех, которые не загружены." + msgid "Minimum save" msgstr "Минимальное сохранение" -msgid "export 3mf with minimum size." -msgstr "экспорт 3mf файла с минимальным размером." +msgid "Export 3MF with minimum size." +msgstr "экспорт 3MF файла с минимальным размером." + +# мктс, Макс. кол. треугольников на столе +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "максимальное количество треугольников на столе при нарезке." + +# мвнс , Макс. время нарезки стола +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "максимальное время нарезки одного стола в секундах." msgid "No check" msgstr "Без проверки" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Не запускать никакие проверки валидности, такие как проверка на конфликт " "путей в G-коде." +msgid "Normative check" +msgstr "Нормативная проверка" + +# ??? +msgid "Check the normative items." +msgstr "Проверка нормативных пунктов." + +# ????? Выходная информация о модели +msgid "Output Model Info" +msgstr "Вывод информации о модели" + +msgid "Output the model's information." +msgstr "Вывод информации о модели." + +# ??? +msgid "Export Settings" +msgstr "Экспорт настроек" + +msgid "Export settings to a file." +msgstr "Экспорт настроек в файл." + +# командная строка? нужен ли пеевод? +msgid "Send progress to pipe" +msgstr "Send progress to pipe" + +# ??? это относится к командной строке +msgid "Send progress to pipe." +msgstr "Send progress to pipe." + +msgid "Arrange Options" +msgstr "Параметры расстановки" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "" +"Параметры расстановки: 0 - отключено, 1 - включено, другие - автоматически" + +# командная строка? нужен ли перевод? +msgid "Repetition count" +msgstr "Количество повторений" + +# ??? это относится к командной строке +msgid "Repetition count of the whole model." +msgstr "Количество повторений всей модели." + msgid "Ensure on bed" msgstr "Обеспечивать размещение на столе" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Поднимает модель над столом, когда она частично находится ниже его уровня. " "По умолчанию отключено." +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Расставьте представленные модели на столе и объединить их в одну модель, " +"чтобы выполнить действия один раз." + +msgid "Convert Unit" +msgstr "Преобразовать ед. изменения" + +msgid "Convert the units of model." +msgstr "Преобразовать размеры модели в другую СИ." + msgid "Orient Options" msgstr "Параметры ориентации" @@ -14452,12 +17784,98 @@ msgstr "" msgid "Rotation angle around the Z axis in degrees." msgstr "Угол поворота вокруг оси Z в градусах." +msgid "Rotate around X" +msgstr "Вращение вокруг оси X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Угол поворота вокруг оси X в градусах." + msgid "Rotate around Y" msgstr "Поворот вокруг оси Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Угол поворота вокруг оси Y в градусах." +msgid "Scale the model by a float factor." +msgstr "Масштабировать модель с помощью коэффициента." + +msgid "Load General Settings" +msgstr "Загрузка общих настроек" + +msgid "Load process/machine settings from the specified file." +msgstr "Загрузка настроек процесса/принтера из указанного файла." + +msgid "Load Filament Settings" +msgstr "Загрузка настроек материала" + +msgid "Load filament settings from the specified file list." +msgstr "Загрузка настроек материала из указанного списка файлов." + +# Исключить модели +# командная строка? нужен ли пеевод? +msgid "Skip Objects" +msgstr "Пропустить объекты" + +# ??? это относится к командной строке +# Пропустить некоторые\выбранные модели в этой печати, Пропуск, Отменить +msgid "Skip some objects in this print." +msgstr "Пропустите некоторые объекты при этой печати." + +# Сделать копию модели +# командная строка? нужен ли пеевод? +msgid "Clone Objects" +msgstr "Клонировать объекты" + +# ??? это относится к командной строке +msgid "Clone objects in the load list." +msgstr "Клонировать объекты в списке загрузки." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" +"Загрузить параметры процесса обновления/принтера при использовании обновления" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Загрузить параметры процесса обновления/принтера при использовании " +"обновления из указанного файла." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "Загрузить обновленные настройки филамента при использовании обновления" + +# ??? +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Загрузить обновленные настройки филамента при использовании обновления." + +# Что за downward machines? +msgid "Downward machines check" +msgstr "Проверка текущего принтера" + +# ??? +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Если включено, будет проверяться совместимость текущего принтера с " +"принтерами из списка." + +msgid "downward machines settings" +msgstr "настройка текущих принтеров" + +msgid "The machine settings list needs to do downward checking." +msgstr "Необходимо выполнить проверку списка настроек текущего принтера." + +# ??? Загрузка +msgid "Load assemble list" +msgstr "Загрузить список сборки" + +# ??? +msgid "Load assemble object list from config file." +msgstr "Загрузить список объектов для сборки из конфигурационного файла." + msgid "Data directory" msgstr "Папка конфигурации пользователя" @@ -14470,16 +17888,116 @@ msgstr "" "полезно для сохранения различных профилей или конфигураций из сетевого " "хранилища." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Папку сохранения" + +msgid "Output directory for the exported files." +msgstr "Выходной каталог для экспортированных файлов." + +msgid "Debug level" +msgstr "Уровень отладки журнала" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Задаёт параметр чувствительности записи событий в журнал.\n" +"0: Критическая ошибка, 1: Ошибка, 2: Предупреждение, 3: Информация, 4: " +"Отладка, 5: Трассировка\n" + +msgid "Enable timelapse for print" +msgstr "Вкл. таймлапс для печати" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" +"Если включено, текущая нарезка будет выполнена с учётом функции таймлапса." + +msgid "Load custom G-code" msgstr "Загрузить пользовательский G-код" -msgid "Load custom gcode from json" -msgstr "Загрузить пользовательской G-код из json" +msgid "Load custom G-code from json." +msgstr "Загрузить G-код из json." -msgid "Current z-hop" +# ??? назначить идентификаторы +msgid "Load filament IDs" +msgstr "Загрузить идентификаторы филаментов" + +msgid "Load filament IDs for each object." +msgstr "Загрузите идентификаторы филамента для каждого объекта." + +msgid "Allow multiple colors on one plate" +msgstr "Разрешить многоцветную печать на одном столе" + +# ???? +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Если включено, то функция расстановки позволяет использовать несколько " +"цветов на одной пластине." + +msgid "Allow rotation when arranging" +msgstr "Разрешить вращение при расстановке" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Если включено, то при расстановке моделей на столе разрешено поворачивать их." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Избегать зону калибровки экструзии при выполнении расстановки" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Если включено, то при расстановки моделей будет избегаться зона калибровки " +"экструзии." + +#, fuzzy +msgid "Skip modified G-code in 3MF" +msgstr "Пропуск модифицированного G-кода в 3mf-файле" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Пропуск модифицированного G-кода в 3mf-файле в профиле принтера или " +"материала." + +msgid "MakerLab name" +msgstr "Имя MakerLab" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "Имя MakerLab, использованное для создания этого 3mf-файла." + +msgid "MakerLab version" +msgstr "Версия MakerLab" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "Версия MakerLab, использованная для создания этого 3mf-файла." + +msgid "metadata name list" +msgstr "список имён метаданных" + +msgid "metadata name list added into 3MF." +msgstr "список имён метаданных добавляемых в 3MF." + +msgid "metadata value list" +msgstr "список значений метаданных" + +msgid "metadata value list added into 3MF." +msgstr "список значений метаданных добавляемых в 3MF." + +msgid "Allow 3MF with newer version to be sliced" +msgstr "Разрешить нарезку 3MF более новой версии" + +# ??? +msgid "Allow 3MF with newer version to be sliced." +msgstr "Разрешить нарезку новых версий 3MF-файлов." + +msgid "Current Z-hop" msgstr "Подъём оси Z" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" "Содержит текущее значение вертикального подъём оси Z, заданное в начале " "пользовательского G-кода." @@ -14487,29 +18005,39 @@ msgstr "" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Положение экструдера в начале пользовательского G-кода. Если " "пользовательский G-код перемещает экструдер в другое место, то информация о " "его новом положении должна записываться в данную переменную, чтобы " -"OrcaSlicer знал, откуда он перемещается, когда управление возвращается назад." +"Snapmaker Orca знал, откуда он перемещается, когда управление возвращается назад." msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -"Статус отката в начале пользовательского G-кода. Если пользовательский G-код " -"перемещает ось экструдера, то информация о статусе отката должна " +"Статус ретракта в начале пользовательского G-кода. Если пользовательский G-" +"код перемещает ось экструдера, то информация о статусе отката должна " "записываться в данную переменную, чтобы программа корректно совершала " "подачу, при возврате контроля над процессом печати." -msgid "Extra deretraction" -msgstr "Доп. выдавливание" +msgid "Extra de-retraction" +msgstr "Дополнительное выдавливание" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "Запланированная дополнительная предзарядка экструдера после подачи." +msgid "Absolute E position" +msgstr "Абсолютные координаты экструдера" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Текущее положение оси экструдера. Используется только при абсолютной " +"адресации экструдера." + msgid "Current extruder" msgstr "Текущий экструдер" @@ -14555,11 +18083,20 @@ msgstr "" msgid "Is extruder used?" msgstr "Используется ли экструдер?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Вектор логического значения, указывающий, используется ли данный экструдер " "при печати." +msgid "Has single extruder MM priming" +msgstr "Имеется предзарядка одиночного ММ экструдера" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Используется ли в этой печати дополнительная область предзарядки для " +"одноэкструдерного мульти-филаментного принтера?" + msgid "Volume per extruder" msgstr "Объём для каждого экструдера" @@ -14567,11 +18104,10 @@ msgid "Total filament volume extruded per extruder during the entire print." msgstr "" "Общий объём материала, выдавленного одним экструдером в процесса всей печати." -# ??? Всего смен инструментов -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Число смен инструментов" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Число смен инструментов в процессе всей печати." msgid "Total volume" @@ -14588,7 +18124,8 @@ msgid "" "filament_density value in Filament Settings." msgstr "" "Вес материала, выдавленного одним экструдером в процессе всей печати. " -"Рассчитывается исходя из плотности материала указанной в настройках прутка." +"Рассчитывается исходя из плотности материала указанной в настройках " +"филамента." msgid "Total weight" msgstr "Общий вес" @@ -14598,7 +18135,7 @@ msgid "" "Filament Settings." msgstr "" "Общий вес затраченного материала. Рассчитывается исходя из плотности " -"материала указанной в настройках прутка." +"материала указанной в настройках филамента." msgid "Total layer count" msgstr "Общее количество слоёв" @@ -14626,7 +18163,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Содержит строку с информацией о том, какое масштабирование было применено к " "отдельным моделям. Нумерация моделей начинается с нуля (первая модель имеет " @@ -14639,14 +18176,16 @@ msgstr "Имя входного файла без расширения" msgid "Source filename of the first object, without extension." msgstr "Имя исходного файла первой модели без расширения." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "Вектор состоит из двух элементов: координаты точки x и y. Значения заданы в " "мм." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "Вектор состоит из двух элементов: ширина (x-размер) и высота (y-размер) " @@ -14660,8 +18199,8 @@ msgid "" "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" "Вектор точек выпуклой оболочки первого слоя. Каждый элемент вектора имеет " -"следующий формат: '[x, y]' (Координаты x и y - числа с плавающей запятой " -"измеряемые в мм)." +"следующий формат: '[x, y]' (x и y - координаты с плавающей запятой в " +"миллиметрах)." msgid "Bottom-left corner of first layer bounding box" msgstr "Нижний левый угол ограничивающего прямоугольника первого слоя" @@ -14696,6 +18235,9 @@ msgstr "Час" msgid "Minute" msgstr "Минута" +msgid "Second" +msgstr "Секунд" + msgid "Print preset name" msgstr "Имя профиля печати" @@ -14703,13 +18245,13 @@ msgid "Name of the print preset used for slicing." msgstr "Имя профиля печати, используемого для нарезки." msgid "Filament preset name" -msgstr "Имя профиля прутка" +msgstr "Имя профиля филамента" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" -"Имя профиля прутка, используемого для нарезки. Это переменная является " +"Имя профиля филамента, используемого для нарезки. Это переменная является " "вектором, содержащим одно имя профиля для каждого экструдера." msgid "Printer preset name" @@ -14724,6 +18266,16 @@ msgstr "Имя физического принтера" msgid "Name of the physical printer used for slicing." msgstr "Имя физического принтера, используемого для нарезки." +msgid "Number of extruders" +msgstr "Количество экструдеров" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Общее количество экструдеров, независимо от того, используются ли они в " +"текущей печати." + msgid "Layer number" msgstr "Номер слоя" @@ -14732,7 +18284,7 @@ msgstr "" "Номер текущего слоя отсчитываемый от единицы (т.е. первый слой имеет номер " "1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Высота слоя над столом" msgid "" @@ -14741,7 +18293,7 @@ msgid "" msgstr "" "Высота текущего слоя над печатным столом, измеренная до верхней части слоя." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Макс. высота слоя над столом" msgid "Height of the last layer above the print bed." @@ -14766,10 +18318,7 @@ msgid "Generating infill toolpath" msgstr "Генерация траектории заполнения" msgid "Detect overhangs for auto-lift" -msgstr "Обнаружение нависаний для автоподъёма" - -msgid "Generating support" -msgstr "Генерация поддержки" +msgstr "Обнаруживать нависания для автоподъёма" msgid "Checking support necessity" msgstr "Проверка необходимости поддержки" @@ -14781,16 +18330,19 @@ msgid "floating cantilever" msgstr "нависающий горизонтальный выступ (консоль)" msgid "large overhangs" -msgstr "большая области нависания" +msgstr "большая область нависания" #, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." msgstr "" -"Похоже, что у модели %s имеются замечания - %s. \n" +"Похоже, что у модели %s имеются замечания - %s.\n" "Переориентируйте её или включите генерацию поддержки." +msgid "Generating support" +msgstr "Генерация поддержки" + msgid "Optimizing toolpath" msgstr "Оптимизация траектории инструмента" @@ -14807,43 +18359,37 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Коррекция горизонтальных размеров модели не будет действовать, поскольку для " "этой модели была выполнена операция окрашивания.\n" "Коррекция горизонтальных размеров модели не может использоваться в сочетании " "с функцией раскрашивания." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Поддержка: генерация траектории инструмента на слое %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Для модели включена компенсация размера по оси XY, которая не будет " +"использоваться, поскольку она окрашена нечеткой оболочкой.\n" +"Компенсация размера по оси XY не может быть совмещена с окраской нечеткой " +"оболочкой." -msgid "Support: detect overhangs" -msgstr "Поддержка: обнаружение нависаний" +msgid "Object name" +msgstr "Имя объекта" msgid "Support: generate contact points" msgstr "Поддержка: генерация точек контакта" -msgid "Support: propagate branches" -msgstr "Поддержка: построение ветвей" +msgid "Loading of a model file failed." +msgstr "Не удалось загрузить файл модели." -msgid "Support: draw polygons" -msgstr "Поддержка: рисование полигонов" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Поддержка: генерация траектории инструмента" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Поддержка: генерация полигонов на слое %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Поддержка: ремонт отверстий на слое %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Поддержка: построение ветвей на слое %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Файл не может быть прочитан, так как он пуст" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14851,25 +18397,16 @@ msgstr "" "Неизвестный формат файла. Входной файл должен иметь расширение *.stl, *.obj, " "*.amf(.xml)." -msgid "Loading of a model file failed." -msgstr "Не удалось загрузить файл модели." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Предоставленный файл не может быть прочитан, так как он пуст." - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." "zip.amf." -msgid "Canceled" -msgstr "Отменено" - msgid "load_obj: failed to parse" msgstr "load_obj: ошибка обработки" msgid "load mtl in obj: failed to parse" -msgstr "Загрузка mtl в obj: не удалось обработать" +msgstr "загрузка mtl в obj: не удалось обработать" msgid "The file contains polygons with more than 4 vertices." msgstr "Файл содержит многоугольники с более чем 4 вершинами." @@ -14878,7 +18415,7 @@ msgid "The file contains polygons with less than 2 vertices." msgstr "Файл содержит многоугольники с менее чем 2 вершинами." msgid "The file contains invalid vertex index." -msgstr "Файл содержит неверный количество вершин." +msgstr "Файл содержит неверное количество вершин." msgid "This OBJ file couldn't be read because it's empty." msgstr "Этот OBJ файл не может быть прочитан, так как он пуст." @@ -14903,7 +18440,7 @@ msgid "Auto-Calibration" msgstr "Автокалибровка" msgid "We would use Lidar to read the calibration result" -msgstr "Для считывания результата калибровки будет использоваться лидар." +msgstr "Для считывания результата калибровки будет использоваться лидар" msgid "Prev" msgstr "Назад" @@ -14923,7 +18460,7 @@ msgstr "Как использовать результаты калибровк msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" -"Коэффициент калибровки динамики потока можно изменить в настройках материала." +"Коэффициент калибровки динамики потока можно изменить в настройках материала" msgid "" "The current firmware version of the printer does not support calibration.\n" @@ -14956,7 +18493,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Введите допустимое значение:\n" "Начальное: >= %.1f\n" @@ -14968,7 +18505,7 @@ msgid "The name cannot be empty." msgstr "Имя не может быть пустым." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Выбранный профиль %s не найден." msgid "The name cannot be the same as the system preset name." @@ -14980,6 +18517,14 @@ msgstr "Имя совпадает с именем другого существ msgid "create new preset failed." msgstr "не удалось создать новый профиль." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -14993,7 +18538,7 @@ msgid "Printer is not connected yet." msgstr "Принтер ещё не подключен." msgid "Please select filament to calibrate." -msgstr "Пожалуйста, выберите пруток для калибровки." +msgstr "Пожалуйста, выберите филамент для калибровки." msgid "The input value size must be 3." msgstr "Размер входного значения должен быть равен 3." @@ -15002,23 +18547,19 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"Этот тип принтера может хранить для каждого сопла только 16 последних " -"результатов. Вы можете удалить существующие результаты, а затем запустить " -"калибровку. Или вы можете продолжить калибровку, но результаты калибровки не " -"будут сохранены. \n" +"Данный принтер может хранить максимум 16 результатов для каждого сопла. Вы " +"можете удалить старые результаты, а затем запустить калибровку. Или вы " +"можете продолжить калибровку, но результаты калибровки не будут сохранены.\n" "Хотите продолжить калибровку?" -msgid "Connecting to printer..." -msgstr "Подключение к принтеру..." - -msgid "The failed test result has been dropped." -msgstr "Результат неудачного теста был удалён." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Результат калибровки динамики потока был сохранён на принтере" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -15029,27 +18570,42 @@ msgstr "" "Результат калибровки с таким именем уже с существует: %s. Вы уверены, что " "хотите перезаписать прошлый результат?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"Этот тип принтера может хранить для каждого сопла только %d последних " -"результатов. Этот результат не будет сохранён." +"Данный принтер может хранить максимум %d результатов для каждого сопла. Этот " +"результат не будет сохранён." + +msgid "Connecting to printer..." +msgstr "Подключение к принтеру..." + +msgid "The failed test result has been dropped." +msgstr "Результат неудачного теста был удалён." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Результат калибровки динамики потока был сохранён на принтере." msgid "Internal Error" msgstr "Внутренняя ошибка" msgid "Please select at least one filament for calibration" -msgstr "Выберите хотя бы один пруток для калибровки" +msgstr "Выберите хотя бы один филамент для калибровки" -msgid "Flow rate calibration result has been saved to preset" -msgstr "Результат калибровки динамики потока был сохранён в профиль" +msgid "Flow rate calibration result has been saved to preset." +msgstr "Результат калибровки динамики потока был сохранён в профиль." -# не длинно??? -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" -"Результат калибровки максимального объёмного расхода был сохранён в профиль" +"Результат калибровки максимального объёмного расхода был сохранён в профиль." msgid "When do you need Flow Dynamics Calibration" msgstr "В каких случаях необходима калибровка динамики потока" @@ -15060,19 +18616,19 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Мы добавили функцию автоматической калибровки для различных материалов, " -"которая полностью автоматизирована, а результат калибровки сохраняется в " -"принтере для дальнейшего использования. Калибровка требуется только в " -"следующих ограниченных случаях:\n" -"1. При использовании нового материала другого производителя/типа или при " -"отсыревании материала;\n" -"2. При износе сопла или его замене на новое;\n" -"3. При изменении в настройках материала максимального объёмного расхода или " -"температуры печати." +"Мы добавили функцию автоматической калибровки для разных филаментов. Она " +"полностью автоматизирована, а результаты сохраняются в памяти принтера для " +"дальнейшего использования. Калибровку необходимо выполнять только в " +"следующих случаях:\n" +"1. При использовании нового филамента другой марки/модели или при высокой " +"влажности филамента;\n" +"2. При износе сопла или замене на новое;\n" +"3. При изменении максимальной объёмной скорости или температуры печати в " +"настройках филамента." msgid "About this calibration" msgstr "О данном виде калибровки" @@ -15096,13 +18652,13 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" -"Подробную информацию про калибровку динамики потока можно найти на нашем " -"вики-сайте.\n" +"Подробную информацию о калибровке динамики потока можно найти на нашем вики-" +"сайте.\n" "\n" -"При обычных обстоятельствах калибровка не требуется. \n" +"При обычных обстоятельствах калибровка не требуется.\n" "Если при запуске печати одним цветом/материалом в меню запуска печати " -"отмечена опция «Калибровка динамики потока», то калибровка пластиковой нити " -"будет производится старым способом. \n" +"отмечена опция «Калибровка динамики потока», то калибровка филамента будет " +"производится старым способом.\n" "При запуске печати несколькими цветами/материалами, принтер будет " "использовать параметр компенсации по умолчанию для материала при каждой его " "смене, что в большинстве случаев позволяет получить хороший результат.\n" @@ -15110,8 +18666,8 @@ msgstr "" "Обратите внимание, что есть несколько случаев, когда результат калибровки " "будет недостоверным, например, когда у печатной пластины плохая адгезия с " "материалом. Улучшить адгезию можно, помыв печатную пластину или нанеся на " -"неё клей для 3D печати. Более подробную информацию можно найти на нашем вики-" -"сайте.\n" +"неё клей для 3D печати. Более подробную информацию можно найти на нашем " +"Wiki.\n" "\n" "По нашим тестам, результаты калибровки имеют погрешность примерно 10%, что " "может приводить к разным результатам при каждой калибровке. Мы продолжаем " @@ -15124,23 +18680,23 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "После проведения калибровки динамики потока всё ещё могут возникать " "некоторые проблемы с экструзией, такие как:\n" "1. Избыточная экструзия. Это приводит к образованию на модели капель или " -"сгустков, слои кажутся толще и неравномерными, чем ожидалось.\n" +"сгустков, слои кажутся толще и неравномерными, чем ожидалось\n" "2. Недоэкструзия. Очень тонкие слои, слабая прочность заполнения или пробелы " -"на верхнем слое модели, даже при медленной печати.\n" +"на верхнем слое модели, даже при медленной печати\n" "3. Низкое качество поверхности. Поверхность деталей кажется шероховатой или " -"неровной.\n" +"неровной\n" "4. Слабая конструкционная прочность. Напечатанное легко ломается или кажется " -"не таким прочным, как должно быть." +"не таким прочным, как должно быть" msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -15149,8 +18705,8 @@ msgid "" msgstr "" "Кроме того, калибровка скорости потока крайне важна для вспенивающихся " "материалов, таких как LW-PLA, используемых при печати деталей для " -"радиоуправляемых самолетов. Эти материалы сильно расширяются при нагревании, " -"а калибровка позволяет получить эталонную скорости потока." +"радиоуправляемых самолётов. Эти материалы сильно расширяются при нагревании, " +"а калибровка позволяет получить эталонную скорость потока." msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " @@ -15189,7 +18745,7 @@ msgstr "" "Автоматическая калибровка скорости потока использует технологию микролидара " "Bambu Lab, непосредственно измеряя калибровочные шаблоны. Однако имейте " "ввиду, что эффективность и точность этого метода может быть снижена при " -"использовании определенных типов материалов. В частности, прозрачные или " +"использовании определённых типов материалов. В частности, прозрачные или " "полупрозрачные материалы, материалы с блестящими частицами или с " "светоотражающим покрытием могут не подойти для данной калибровки и привести " "к нежелательным результатам.\n" @@ -15197,7 +18753,7 @@ msgstr "" "\n" "Результаты калибровки могут различаться от калибровки к калибровке или от " "материала к материалу. Мы продолжаем улучшать точность и совместимость этой " -"калибровки путем обновления прошивки принтера.\n" +"калибровки путём обновления прошивки принтера.\n" "\n" "Внимание: калибровка скорости потока - это сложный процесс, к которому " "следует прибегать только тем, кто полностью понимает её назначение и " @@ -15222,7 +18778,7 @@ msgstr "" "материалов со значительной термической усадкой/расширением, например..." msgid "materials with inaccurate filament diameter" -msgstr "материалов с неточным диаметром пластиковой нити" +msgstr "материалов с неточным диаметром прутка филамента" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Мы нашли лучший коэффициент калибровки динамики потока" @@ -15241,23 +18797,12 @@ msgstr "" "*Мы рекомендуем добавить к названию материала, производителя, тип и даже " "уровень влажности" -msgid "Failed" -msgstr "Неудачно" - msgid "Please enter the name you want to save to printer." -msgstr "Введите имя, который хотите сохранить на принтере." +msgstr "Введите имя, которое хотите сохранить на принтере." msgid "The name cannot exceed 40 characters." msgstr "Максимальная длина имени 40 символов." -# ??? -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Можно сохранить только один результат с одинаковым именем. Вы уверены, что " -"хотите перезаписать другие результаты?" - msgid "Please find the best line on your plate" msgstr "Пожалуйста, найдите лучшую линию на столе" @@ -15268,10 +18813,7 @@ msgid "Input Value" msgstr "Входное значение" msgid "Save to Filament Preset" -msgstr "Сохранить в профиль прутка" - -msgid "Preset" -msgstr "Профиль" +msgstr "Сохранить в профиль филамента" msgid "Record Factor" msgstr "Запись коэффициента" @@ -15286,7 +18828,7 @@ msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "Введите допустимое значение (0.0 < коэффициент потока < 2.0)" msgid "Please enter the name of the preset you want to save." -msgstr "Введите имя профили, который хотите сохранить." +msgstr "Введите имя профиля, которое хотите сохранить." msgid "Calibration1" msgstr "Калибровка 1" @@ -15295,7 +18837,7 @@ msgid "Calibration2" msgstr "Калибровка 2" msgid "Please find the best object on your plate" -msgstr "Пожалуйста, найдите лучшую модель на своей столе" +msgstr "Пожалуйста, найдите лучшую модель на столе" msgid "Fill in the value above the block with smoothest top surface" msgstr "Заполните значение над блоком с самой гладкой верхней поверхностью" @@ -15307,9 +18849,6 @@ msgstr "Пропустить калибровку 2" msgid "flow ratio : %s " msgstr "коэффициент потока: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Выберите блок с самой гладкой верхней поверхностью" - msgid "Please choose a block with smoothest top surface." msgstr "Выберите блок с самой гладкой верхней поверхностью." @@ -15339,22 +18878,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Параметры печати" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" -msgstr "Типа печатной пластины" +msgstr "Тип печатной пластины" msgid "filament position" -msgstr "положение прутка" - -msgid "External Spool" -msgstr "Внешняя катушка" +msgstr "положение филамента" msgid "Filament For Calibration" -msgstr "Пруток для калибровки" +msgstr "Материал для калибровки" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Советы по выбору материала для калибровки: \n" "- Материалы, которые имеют близкие значения температуры нагреваемого стола\n" @@ -15374,8 +18928,25 @@ msgstr "%s не совместима с %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "Автоматическая калибровка динамики потока для TPU не поддерживается." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Невозможно печатать несколькими филаментами с большой разницей температур. В " +"противном случае экструдер и сопло могут быть заблокированы или повреждены " +"во время печати" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" -msgstr "Подключением к принтеру" +msgstr "Подключение к принтеру" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" msgid "From k Value" msgstr "Начальный коэф. K" @@ -15390,10 +18961,13 @@ msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "Диаметр сопла был синхронизирован с настройками принтера" msgid "From Volumetric Speed" -msgstr "От объёмной скорости" +msgstr "От объёмного расхода" msgid "To Volumetric Speed" -msgstr "К объёмной скорости" +msgstr "К объёмному расходу" + +msgid "Are you sure you want to cancel this print?" +msgstr "Вы уверены, что хотите отменить эту печать?" msgid "Flow Dynamics Calibration Result" msgstr "Результаты калибровки динамики потока" @@ -15416,20 +18990,32 @@ msgstr "Действие" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." msgstr "" -"Этот тип принтера может хранить для каждого сопла только %d последних " -"результатов." +"Данный принтер может хранить максимум %d результатов для каждого сопла." msgid "Edit Flow Dynamics Calibration" msgstr "Редактировать калибровку динамики потока" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" -msgstr "Новая калибровка динамика потока" +msgstr "Новая калибровка динамики потока" msgid "Ok" -msgstr "Ok" +msgstr "Ок" msgid "The filament must be selected." -msgstr "Выберите пластиковую нить." +msgstr "Филамент должен быть выбран." + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" msgstr "Поиск по сети" @@ -15466,15 +19052,12 @@ msgstr "" msgid "PA Calibration" msgstr "Калибровка PA" -msgid "DDE" -msgstr "Директ" - -msgid "Bowden" -msgstr "Боуден" - msgid "Extruder type" msgstr "Тип экструдера" +msgid "DDE" +msgstr "Директ" + msgid "PA Tower" msgstr "Башня" @@ -15493,14 +19076,32 @@ msgstr "Конечный коэффициент PA: " msgid "PA step: " msgstr "Шаг коэффициента PA: " +msgid "Accelerations: " +msgstr "Ускорения: " + +msgid "Speeds: " +msgstr "Скорости: " + msgid "Print numbers" msgstr "Печатать значения коэффициентов" +msgid "Comma-separated list of printing accelerations" +msgstr "Значения ускорений печати, вводимые через запятую" + +msgid "Comma-separated list of printing speeds" +msgstr "Значения скоростей печати, вводимые через запятую" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Введите допустимые значения:\n" "Начальный коэффициент PA: >= 0.0\n" @@ -15510,6 +19111,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Калибровка температуры" +msgid "Filament type" +msgstr "Тип филамента" + msgid "PLA" msgstr "PLA" @@ -15531,9 +19135,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Тип прутка" - msgid "Start temp: " msgstr "Начальная температура: " @@ -15543,16 +19144,15 @@ msgstr "Конечная температура: " msgid "Temp step: " msgstr "Шаг температуры: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Введите допустимые значения:\n" -"Начальная температура: <= 350\n" -"Конечная температура: >= 180\n" -"Начальная температура > Конечная температура + 5)" msgid "Max volumetric speed test" msgstr "Тест макс. объёмного расхода" @@ -15563,14 +19163,14 @@ msgstr "Начальный объёмный расход: " msgid "End volumetric speed: " msgstr "Конечный объёмный расход: " -msgid "step: " -msgstr "Шаг изменения: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Введите допустимое значение:\n" "Начальное > 0\n" @@ -15586,11 +19186,14 @@ msgstr "Начальная скорость: " msgid "End speed: " msgstr "Конечная скорость: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Введите допустимое значение:\n" "Начальное > 10\n" @@ -15598,22 +19201,150 @@ msgstr "" "Конечное > Начальное + Шаг" msgid "Start retraction length: " -msgstr "Начальная длина отката: " +msgstr "Начальная длина ретракта: " msgid "End retraction length: " -msgstr "Конечная длина отката: " +msgstr "Конечная длина ретракта: " -msgid "mm/mm" -msgstr "мм/мм" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +# ??? Подбор +msgid "Input shaping Frequency test" +msgstr "Тест частоты Input Shaping" + +msgid "Test model" +msgstr "Тестовая модель" + +msgid "Ringing Tower" +msgstr "Полный тест (Ringing Tower)" + +msgid "Fast Tower" +msgstr "Быстрый тест (Fast Tower)" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "(начальное/конечное значение)" + +msgid "Frequency settings" +msgstr "Задание частоты" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "Затухание (Damp): " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Введите допустимые значения:\n" +"(0 < FreqStart < FreqEnd < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "Введите валидный коэффициент затухания ((0 < Damping/zeta factor <= 1)" + +msgid "Input shaping Damp test" +msgstr "Тест затухания Input shaping" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "Частота по" + +msgid "Damp" +msgstr "Затухание" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "Примечание: используйте ранее рассчитанные частоты." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Введите допустимые значения:\n" +"(0 < Частота < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Введите действительный коэффициент затухания (0 <= DampingStart < DampingEnd " +"<= 1)" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Отправить G-кода на хост принтера" msgid "Upload to Printer Host with the following filename:" msgstr "Загрузить на хост принтера со следующим именем:" msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "В качестве разделителя каталогов используйте косую черту ( / ). " +msgstr "В качестве разделителя каталогов используйте косую черту ( / )." msgid "Upload to storage" msgstr "Загрузить в хранилище" @@ -15653,20 +19384,41 @@ msgstr "Отменить выбранное" msgid "Show error message" msgstr "Показать сообщение об ошибке" -msgid "Enqueued" -msgstr "Поставлено в очередь" +# ??? Ожидание, Запланировано +msgid "Queued" +msgstr "В очереди" msgid "Uploading" msgstr "Отправка" -msgid "Cancelling" +msgid "Canceling" msgstr "Отмена" msgid "Error uploading to print host" msgstr "Ошибка при отправке на хост печати" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Выбранный тип стола не соответствует тому что в файле. Пожалуйста, проверьте " +"и подтвердите действие перед началом печати." + +msgid "Time-lapse" +msgstr "Таймлапсы" + +# ??? +msgid "Heated Bed Leveling" +msgstr "Выравнивание с подогревом" + +msgid "Textured Build Plate (Side A)" +msgstr "Текстурированная пластина (сторона А)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Текстурированная пластина (сторона Б)" + msgid "Unable to perform boolean operation on selected parts" -msgstr "Невозможно выполнить булевую операцию над выбранными элементами." +msgstr "Невозможно выполнить булевую операцию над выбранными элементами" msgid "Mesh Boolean" msgstr "Булевы операции" @@ -15683,8 +19435,9 @@ msgstr "Пересечение" msgid "Source Volume" msgstr "Исходный объём" +# ??? msgid "Tool Volume" -msgstr "" +msgstr "Объём инструмента" msgid "Subtract from" msgstr "Главный" @@ -15725,14 +19478,14 @@ msgstr "Версия ОС:" msgid "DNS Server:" msgstr "DNS-сервер:" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "Тест доступности Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Тест доступности Snapmaker Orca (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "Тест доступности Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Тест доступности Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Тест доступности Bing.com" +msgid "Test bing.com" +msgstr "Тест доступности bing.com" msgid "Test bing.com:" msgstr "Тест доступности bing.com:" @@ -15741,25 +19494,27 @@ msgid "Log Info" msgstr "Журнал сведений" msgid "Select filament preset" -msgstr "Выбор профиля прутка" +msgstr "Выбор профиля филамента" msgid "Create Filament" -msgstr "Создание пластиковой нити" +msgstr "Создать филамент" msgid "Create Based on Current Filament" -msgstr "Создать на основе профиля выбранного прутка" +msgstr "Создать на основе профиля выбранного филамента" msgid "Copy Current Filament Preset " -msgstr "Скопировать текущий профиль прутка " +msgstr "Скопировать текущий профиль филамента " msgid "Basic Information" msgstr "Основная информация" +# ??? Создать профиль для этого прутка, Создание профиля прутка для данный прутка +# ??? было Добавление профиля прутка под текущий пруток msgid "Add Filament Preset under this filament" -msgstr "Добавление профиля прутка под текущий пруток" +msgstr "Создание профиля филамента, основанного на этом филамента" msgid "We could create the filament presets for your following printer:" -msgstr "Мы можем создать профили прутка для ваших следующих принтеров:" +msgstr "Можно создать профили филамента для следующих принтеров:" msgid "Select Vendor" msgstr "Выбор производителя" @@ -15771,10 +19526,10 @@ msgid "Can't find vendor I want" msgstr "Производитель отсутствует в списке" msgid "Select Type" -msgstr "Тип прутка" +msgstr "Выберите тип" msgid "Select Filament Preset" -msgstr "Выбор профиля прутка" +msgstr "Выбор профиля филамента" msgid "Serial" msgstr "Серия" @@ -15783,7 +19538,7 @@ msgid "e.g. Basic, Matte, Silk, Marble" msgstr "например обычная, матовая, шёлковая, мраморная" msgid "Filament Preset" -msgstr "Профиль прутка" +msgstr "Профиль филамента" msgid "Create" msgstr "Создать" @@ -15795,30 +19550,30 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "Не задан производитель, пожалуйста, введите производителя." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" или \"Generic\" не могут быть заданы в качестве производителей для " "пользовательский пластиковых нитей." msgid "Filament type is not selected, please reselect type." -msgstr "Не выбран тип прутка, пожалуйста, выберите его заново." +msgstr "Не выбран тип филамента, пожалуйста, выберите его заново." -msgid "Filament serial is not inputed, please input serial." -msgstr "Пожалуйста, введите серию прутка." +msgid "Filament serial is not entered, please enter serial." +msgstr "Пожалуйста, введите серийный номер филамента." msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." msgstr "" -"В имени производителя или серии прутка могут присутствовать управляющие " -"символы. Пожалуйста, удалите их и введите повторно." +"В данных о производителе или серийном номере филамента могут присутствовать " +"экранирующие символы. Удалите их и введите заново." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" -"В поле ввода производителя/серии пластиковой нити введены пробелы. \n" -"Пожалуйста, введите нормальное имя." +"Все введенные данные в поле производителя или серийного номера содержат " +"пробелы. Пожалуйста, введите данные повторно." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "" "Имя производителя не может начинаться с числа. Пожалуйста, введите " "нормальное имя." @@ -15829,17 +19584,17 @@ msgstr "Выберите хотя бы один принтер или профи #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Пластиковая нить с таким именем %s уже существует. \n" +"Филамент с таким именем %s уже существует.\n" "Если продолжить создание, то созданный профиль будет отображаться с полным " "именем. Хотите продолжить?" -# ??? При создании некоторых существующих профилей произошла ошибка, а именно: +# ??? Создание некоторых профилей завершилось с ошибкой. Список проблемных профилей: msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "Не удалось создать некоторые из следующих существующих профилей:\n" +msgstr "Не удалось создать следующие профили:\n" msgid "" "\n" @@ -15850,11 +19605,11 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" -"Чтобы добавить профиль для других принтеров, перейдите к выбору принтера." +"Чтобы добавить профиль для других принтеров, перейдите к выбору принтера" msgid "Create Printer/Nozzle" msgstr "Создать принтер/сопло" @@ -15877,21 +19632,27 @@ msgstr "Импорт профиля" msgid "Create Type" msgstr "Создать тип" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "Модель не найдена, выберите производителя." -msgid "Select Model" -msgstr "Выбор модели" - msgid "Select Printer" msgstr "Выбор принтера" +msgid "Select Model" +msgstr "Выбор модели" + msgid "Input Custom Model" msgstr "Введите название модели" msgid "Can't find my printer model" msgstr "Мой принтер отсутствует в списке" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Прямоугольник" @@ -15901,15 +19662,9 @@ msgstr "Область печати" msgid "Hot Bed STL" msgstr "Модель стола" -msgid "Load stl" -msgstr "Загрузить stl" - msgid "Hot Bed SVG" msgstr "Текстура стола" -msgid "Load svg" -msgstr "Загрузить svg" - msgid "Max Print Height" msgstr "Высота области печати" @@ -15924,23 +19679,23 @@ msgstr "" "Ошибка при получении размера файла, пожалуйста, попробуйте импортировать его " "ещё раз." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Путь к профилю не найден, пожалуйста, выберите другого производителя." msgid "The printer model was not found, please reselect." msgstr "Модель принтера не найдена, пожалуйста, выберите заново." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Диаметр сопла не задан, пожалуйста, выберите заново." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "Профиль принтера не найдена, выберите заново." msgid "Printer Preset" msgstr "Профиль принтера" msgid "Filament Preset Template" -msgstr "Шаблон профиля прутка" +msgstr "Шаблон профиля филамента" msgid "Deselect All" msgstr "Снять выбор со всего" @@ -15948,16 +19703,12 @@ msgstr "Снять выбор со всего" msgid "Process Preset Template" msgstr "Шаблон профиля процесса" -msgid "Back Page 1" -msgstr "Вернуться на 1-ю страницу" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Вы не выбрали на базе какого профиля принтера хотите создать новый профиль " -"принтера. \n" -"Пожалуйста, выберите производителя и модель принтера." +"Вы ещё не выбрали, на основе какого принтера создать профиль. Выберите " +"производителя и модель принтера" msgid "" "You have entered an illegal input in the printable area section on the first " @@ -15966,9 +19717,6 @@ msgstr "" "В разделе «Область печати» на первой странице введено недопустимое значение. " "Проверьте введение значение перед созданием." -msgid "The custom printer or model is not inputed, place input." -msgstr "Пожалуйста, введите имя пользовательского принтера или модель." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15979,24 +19727,23 @@ msgid "" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" "Профиль принтера с таким именем уже существует. Хотите перезаписать его?\n" -"\tДа: перезаписать профиль принтера. Профили прутка и процесса с теми же " +"\tДа: перезаписать профиль принтера. Профили филамента и процесса с теми же " "именами будут созданы заново, а профили без имени будут зарезервированы.\n" "\tОтмена: не создавать профиль и вернуться на экран создания." msgid "You need to select at least one filament preset." -msgstr "Необходимо выбрать хотя бы один профиль прутка." +msgstr "Необходимо выбрать хотя бы один профиль филамента." msgid "You need to select at least one process preset." msgstr "Необходимо выбрать хотя бы один профиль процесса." msgid "Create filament presets failed. As follows:\n" -msgstr "Не удалось создать профиль прутка. Причины: \n" +msgstr "Не удалось создать профиль филамента. Причины: \n" msgid "Create process presets failed. As follows:\n" msgstr "Не удалось создать профиль процесса. Причины: \n" -# ??? выберите занова -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Производитель не найден, пожалуйста, выберите другого." msgid "Current vendor has no models, please reselect." @@ -16005,7 +19752,7 @@ msgstr "" "заново." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "Вы не выбрали или не ввели производителя и модель принтера." @@ -16013,14 +19760,13 @@ msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." msgstr "" -"В имени производителя или модели пользовательского принтера могут " -"присутствовать управляющие символы. Пожалуйста, удалите их и введите " -"повторно." +"Похоже, в имени производителя или модели пользовательского принтера " +"присутствуют управляющие символы. Удалите их и введите корректные данные." msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" -"В поле ввода производителя/модели принтера введены пробелы. \n" +"В поле ввода производителя/модели принтера введены пробелы.\n" "Пожалуйста, введите нормальное имя." msgid "Please check bed printable shape and origin input." @@ -16030,20 +19776,28 @@ msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "Для замены сопла сначала выберите принтер." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Профиль принтера успешно создан" -msgid "Create Filament Successful" -msgstr "Профиль прутка успешно создан" +msgid "Filament Created Successfully" +msgstr "Профиль филамента успешно создан" msgid "Printer Created" msgstr "Профиль принтера создан" msgid "Please go to printer settings to edit your presets" -msgstr "Для редактирования настроек профиля перейдите в настройки принтера!" +msgstr "Для редактирования настроек профиля перейдите в настройки принтера" msgid "Filament Created" -msgstr "Профиль прутка создан" +msgstr "Профиль филамента создан" msgid "" "Please go to filament setting to edit your presets if you need.\n" @@ -16051,44 +19805,41 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" -"При необходимости перейдите в настройку прутка для редактирования настроек " -"профиля.\n" -"Обратите внимание, что на качество печати существенно влияют температура " -"сопла, температура \n" -"нагреваемого стола и максимальный объёмный расход. Пожалуйста, тщательнее " -"подбирайте настройки." +"При необходимости отредактируйте настройки в разделе настроек филамента.\n" +"Обратите внимание, что температура сопла, температура стола и максимальная " +"объёмная скорость существенно влияют на качество печати. ​​Устанавливайте их " +"внимательно." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Программа обнаружила, что функция синхронизации пользовательских профилей " -"отключена, \n" -"что может привести к неудачной настройке прутка на вкладке «Принтер». \n" +"отключена, что может привести к неудачной настройке филамента во вкладке " +"«Принтер».\n" "Нажмите «Синхронизировать пользовательские профили», чтобы включить функцию " "синхронизации." msgid "Printer Setting" msgstr "Настройка принтера" -# ???????8 msgid "Printer config bundle(.orca_printer)" -msgstr "Printer config bundle(.orca_printer) - Пакет конфигурации принтера" +msgstr "Printer config bundle(.orca_printer) - Пакет профилей принтера" msgid "Filament bundle(.orca_filament)" -msgstr "Filament bundle(.orca_filament) - Пакет конфигурации прутков" +msgstr "Filament bundle(.orca_filament) - Пакет профилей филаментов" msgid "Printer presets(.zip)" msgstr "Printer presets(.zip) - Профили принтеров" msgid "Filament presets(.zip)" -msgstr "Filament presets (.zip) - Профили прутков" +msgstr "Filament presets (.zip) - Профили филаментов" msgid "Process presets(.zip)" msgstr "Process presets (.zip) - Профили процессов" @@ -16099,19 +19850,17 @@ msgstr "ошибка инициализации" msgid "add file fail" msgstr "ошибка добавления файла" -# ??? msgid "add bundle structure file fail" -msgstr "ошибка добавления файла пакета конфигурации" +msgstr "ошибка добавления файла пакета профилей" -# ??? завершилось с ошибкой msgid "finalize fail" -msgstr "Ошибка записи" +msgstr "ошибка записи" msgid "open zip written fail" -msgstr "Ошибка открытия zip-файла для записи" +msgstr "ошибка открытия zip-файла для записи" msgid "Export successful" -msgstr "Успешно экспортировано!" +msgstr "Успешно экспортировано" #, c-format, boost-format msgid "" @@ -16123,20 +19872,30 @@ msgstr "" "Файл '%s' уже существует в текущем каталоге. Хотите перезаписать его?\n" "Если нет, то к имени будет добавлен временной суффикс." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" -"Can be shared with others." +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." msgstr "" -"Принтер и все профили пластиковых нитей и процессов, принадлежащие " -"выбранному принтеру.\n" -"Можно будет поделиться с другими пользователями." +"Файл: %s\n" +"возможно, был открыт в другой программе.\n" +"Закройте его и повторите попытку." msgid "" -"User's fillment preset set. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"Набор пользовательских профилей пластиковых нитей.\n" -"Можно будет поделиться с другими пользователями." +"Экспортируется профиль принтера, а также профили пластиковых нитей\n" +"и процессов, связанные с выбранным принтером.\n" +"Вы сможете делиться этими файлами с другими пользователями." + +msgid "" +"User's filament preset set.\n" +"Can be shared with others." +msgstr "" +"Экспортируется набор пользовательских профилей пластиковых нитей.\n" +"Вы сможете делиться этими файлами с другими пользователями." msgid "" "Only display printer names with changes to printer, filament, and process " @@ -16152,8 +19911,8 @@ msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Будут отображаться только пользовательские профили принтеров. \n" -"Каждый выбранный профиль будет экспортирован в zip-файл." +"Будут отображаться только пользовательские профили принтеров.\n" +"Все они будут экспортированы в единый zip-файл." msgid "" "Only the filament names with user filament presets will be displayed, \n" @@ -16161,7 +19920,7 @@ msgid "" "exported as a zip." msgstr "" "Будут отображаться только пользовательские профили пластиковых нитей.\n" -"Все они будут экспортированы в zip-файл." +"Все они будут экспортированы в единый zip-файл." msgid "" "Only printer names with changed process presets will be displayed, \n" @@ -16169,15 +19928,15 @@ msgid "" "exported as a zip." msgstr "" "Будут отображаться только профили принтеров с изменёнными профилями " -"процесса. \n" -"Все пользовательские профили процессов для каждого выбранного профиля " -"принтера будут экспортированы в zip-файл." +"процесса.\n" +"Все пользовательские профили процессов будут экспортированы в единый zip-" +"файл." msgid "Please select at least one printer or filament." -msgstr "Пожалуйста, выберите хотя бы один принтер или пластиковую нить." +msgstr "Пожалуйста, выберите хотя бы один принтер или филамент." msgid "Please select a type you want to export" -msgstr "Пожалуйста, выберите то, что вы хотите экспортировать" +msgstr "Пожалуйста, выберите тип, который вы хотите экспортировать" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "" @@ -16185,10 +19944,10 @@ msgstr "" "конфигурации ещё раз." msgid "Edit Filament" -msgstr "Изменение прутка" +msgstr "Настройка филамента" msgid "Filament presets under this filament" -msgstr "Профили прутка под эту пластиковую нить" +msgstr "Профили филамента, основанные на этом филаменте" msgid "" "Note: If the only preset under this filament is deleted, the filament will " @@ -16197,19 +19956,27 @@ msgstr "" "Примечание: если удаляется единственный профиль для этого материала, \n" "то сам материал также будет удалён после закрытия окна." -# ??? Профили, наследуемые от других профилей, не могут быть удалены. -msgid "Presets inherited by other presets can not be deleted" -msgstr "Профили на которых основаны другие профили не могут быть удалены." +msgid "Presets inherited by other presets cannot be deleted" +msgstr "Профили на которых основаны другие профили не могут быть удалены" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "Профиль указанный ниже, наследуется от текущего профиля." -msgstr[1] "Профили указанные ниже, наследуются от текущего профиля." -msgstr[2] "Профили указанные ниже, наследуются от текущего профиля." +msgstr[0] "Профиль, указанный ниже, наследуется от текущего профиля." +msgstr[1] "Профили, указанные ниже, наследуются от текущего профиля." +msgstr[2] "Профили, указанные ниже, наследуются от текущего профиля." msgid "Delete Preset" msgstr "Удалить профиль" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Вы уверены, что хотите удалить выбранный профиль? \n" +"Если этот профиль используется в данный момент в вашем принтере, пожалуйста, " +"сбросьте информацию о филаменте для этого слота." + msgid "Are you sure to delete the selected preset?" msgstr "Вы уверены, что хотите удалить выбранный профиль?" @@ -16219,20 +19986,17 @@ msgstr "Удалить профиль" msgid "+ Add Preset" msgstr "+ Добавить профиль" -msgid "Delete Filament" -msgstr "Удалить пруток" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Все профили прутка, относящиеся к этому материалу, будут удалены. Если вы " -"используете этот пруток в принтере, пожалуйста, сбросьте информацию о прутке " -"для этого слота." +"Все профили филамента, относящиеся к этому материалу, будут удалены.\n" +"Если вы используете этот пруток в принтере, пожалуйста, сбросьте информацию " +"о прутке для этого слота." msgid "Delete filament" -msgstr "Удаление прутка" +msgstr "Удаление филамента" msgid "Add Preset" msgstr "Добавить профиль" @@ -16241,10 +20005,10 @@ msgid "Add preset for new printer" msgstr "Добавление профиля для нового принтера" msgid "Copy preset from filament" -msgstr "Копировать профиль из прутка" +msgstr "Копировать профиль из филамента" msgid "The filament choice not find filament preset, please reselect it" -msgstr "При выборе прутка не найден профиль прутка, выберите его повторно." +msgstr "Не удалось найти профиль филамента. Выберите его повторно" msgid "[Delete Required]" msgstr "[Необходимо удалить]" @@ -16253,28 +20017,43 @@ msgid "Edit Preset" msgstr "Изменить профиль" msgid "For more information, please check out Wiki" -msgstr "Более подробно читайте на сайте -> " +msgstr "Для получения более подробной информации посетите Wiki" msgid "Collapse" msgstr "Свернуть" msgid "Daily Tips" -msgstr "Ежедневные советы " +msgstr "Ежедневные советы" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "сопло сохранённое: %.1f %s" +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" -"Диаметр сопла в профиле не соответствует сохранённому \n" -"в памяти диаметру сопла. Вы недавно сменили сопло?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Печать %s материалом с %s может привести к повреждению сопла." +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Нужно выбрать принтер" @@ -16282,12 +20061,41 @@ msgstr "Нужно выбрать принтер" msgid "The start, end or step is not valid value." msgstr "Недопустимое значение: начальное, конечное или шаг." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" msgstr "" "Невозможно выполнить калибровку: возможно, установленный диапазон значений " -"калибровки слишком велик или шаг слишком мал." +"калибровки слишком велик или шаг слишком мал" msgid "Physical Printer" msgstr "Физический принтер" @@ -16301,13 +20109,10 @@ msgstr "Не удалось получить действительную ссы msgid "Success!" msgstr "Успешно!" -# ??? Вы уверены, что хотите разлогиниться... завершить сеанс? +# ??? Вы уверены, что хотите разлогиниться, Вы уверены, что хотите выйти из аккаунта?" msgid "Are you sure to log out?" msgstr "Вы уверены, что хотите выйти из системы?" -msgid "Refresh Printers" -msgstr "Обновить принтеры" - # ??? msgid "View print host webui in Device tab" msgstr "Веб-интерфейс хоста печати на вкладке «Принтер»" @@ -16354,22 +20159,22 @@ msgstr "Не удалось подключиться к принтерам, по msgid "Mismatched type of print host: %s" msgstr "Несоответствующий тип хоста печати: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "Подключение к AstroBox успешно установлено." msgid "Could not connect to AstroBox" msgstr "Не удалось подключиться к AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Примечание: требуется версия AstroBox не ниже 1.1.0." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Подключение к Duet успешно установлено." msgid "Could not connect to Duet" msgstr "Не удалось подключиться к Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Произошла неизвестная ошибка" msgid "Wrong password" @@ -16379,10 +20184,9 @@ msgid "Could not get resources to create a new connection" msgstr "Не удалось получить ресурсы для создания нового подключения" msgid "Upload not enabled on FlashAir card." -msgstr "Загрузка на карту FlashAir не была включена." +msgstr "Загрузка данных на карту FlashAir не включена." -# ????? -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "" "Подключение к FlashAir успешно установлено. Загрузка на карту включена." @@ -16396,28 +20200,28 @@ msgstr "" "Примечание: для активации функцией загрузки, требуется FlashAir с прошивкой " "2.00.02 и выше." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "Подключение к MKS успешно установлено." msgid "Could not connect to MKS" msgstr "Не удалось подключиться к MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "Подключение к OctoPrint успешно установлено." msgid "Could not connect to OctoPrint" msgstr "Не удалось подключиться к OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Примечание: требуется версия OctoPrint не ниже 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Подключение к Prusa SL1 / SL1S успешно установлено." msgid "Could not connect to Prusa SLA" msgstr "Не удалось подключиться к Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "Подключение к PrusaLink успешно установлено." msgid "Could not connect to PrusaLink" @@ -16441,19 +20245,19 @@ msgstr "%1% : нет свободного места" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "Ошибка при отправке. Не найдено подходящего хранилища в %1%." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Подключение к Prusa Connect успешно установлено." msgid "Could not connect to Prusa Connect" msgstr "Не удалось подключиться к Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Подключение к Repetier успешно установлено." msgid "Could not connect to Repetier" msgstr "Не удалось подключиться к Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Примечание: требуется версия Repetier не ниже 0.90.0." #, boost-format @@ -16485,8 +20289,8 @@ msgstr "" "Ошибка: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Стандартная высота слоя для сопла 0.2 мм. Маленькая высота слоя обеспечивает " "практически незаметные слои и высокое качество печати. Подходит для " @@ -16494,8 +20298,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.2 мм, имеет более низкие " "скорости и ускорения, а также задан гироидный шаблон заполнения. Это " @@ -16504,8 +20308,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.2 мм, имеет немного большую " "высоту слоя, что обеспечивает практически незаметные слои и немного " @@ -16513,8 +20317,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.2 мм, имеет наибольшую " "высоту слоя, слои становятся немного более заметными, но при этом " @@ -16522,18 +20325,18 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"По сравнению со стандартным профилем для сопла 0.2 мм, имеет меньшую высоту " -"слоя, что обеспечивает практически незаметные слои и более высокое качество " -"печати, но при этом увеличивается время печати." +"По сравнению со стандартным профилем для сопла 0,2 мм, высота слоя меньше. " +"Это обеспечивает практически незаметные линии слоёв и более высокое качество " +"печати, но увеличивает время печати." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.2 мм, имеет меньшую высоту " "слоя, более низкие скорости и ускорения, а также задан гироидный шаблон " @@ -16541,36 +20344,36 @@ msgstr "" "качество печати, но при этом значительно увеличивается время печати." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"По сравнению со стандартным профилем для сопла 0.2 мм, имеет наименьшую " -"высоту слоя, что обеспечивает незаметные слои и гораздо более высокое " -"качество печати, но при этом увеличивается время печати." +"По сравнению со стандартным профилем для сопла 0,2 мм, высота слоя меньше. " +"Это обеспечивает минимальный размер линий слоя и более высокое качество " +"печати, но увеличивает время печати." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" -"По сравнению со стандартным профилем для сопла 0.2 мм, имеет наименьшую " -"высоту слоя, более низкие скорости и ускорения, а также задан гироидный " -"шаблон заполнения. Это обеспечивает незаметные слои и наилучшее качество " -"печати, но при этом значительно увеличивается время печати." +"По сравнению со стандартным профилем для сопла 0.2 мм, имеет меньшую высоту " +"слоя, более низкие скорости и ускорения, а также задан гироидный шаблон " +"заполнения. Это обеспечивает практически невидимые слои и более высокое " +"качество печати, но при этом значительно увеличивается время печати." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Стандартная высота слоя для сопла 0.4 мм, обеспечивающая нормальное качество " "печати, подходящее для большинства обычных сценариев печати." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.4 мм, имеет больше " "периметров и более высокую плотность заполнения. Это приводит к повышению " @@ -16579,8 +20382,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.4 мм, имеет большую высоту " "слоя. Как результат - более заметные слои и снижение качества печати, но при " @@ -16588,8 +20391,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "По сравнению со стандартным профилем для сопла 0.4 мм, имеет большую высоту " "слоя. Как результат - более заметные слои, снижение качества печати, но при " @@ -16597,8 +20400,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.4 мм, имеет меньшую высоту " "слоя. Как результат - менее заметные слои, более высокое качество печати, но " @@ -16607,8 +20410,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.4 мм, имеет меньшую высоту " "слоя, более низкие скорости и ускорения, а также задан гироидный шаблон " @@ -16617,8 +20420,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.4 мм, имеет меньшую высоту " "слоя. Как результат - почти незначительные слои и более высокое качество " @@ -16627,8 +20430,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.4 мм, имеет наименьшую " "высоту слоя, более низкие скорость и ускорение, а также задан гироидный " @@ -16637,24 +20440,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.4 мм, имеет наименьшую " "высоту слоя. Как результат - почти незначительные слои, но при этом " "увеличивается время печати." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Стандартная высота слоя для сопла 0.6 мм. Большая высота слоя, как результат " "- видимые слои при нормальном качестве и времени печати." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.6 мм, имеет больше " "периметров и более высокую плотность заполнения. Это приводит к повышению " @@ -16662,8 +20464,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.6 мм, имеет большую высоту " "слоя. Как результат - более заметные слои и снижение качества печати, но при " @@ -16671,8 +20473,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.6 мм, имеет большую высоту " "слоя. Как результат - более заметные слои и значительное снижение качества " @@ -16680,8 +20482,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.6 мм, имеет меньшую высоту " "слоя. Как результат - менее заметные слои и незначительное повышению " @@ -16689,45 +20491,42 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "По сравнению с профилем по умолчанию для соплом 0.6 мм, имеет меньшую высоту " "слоя. Как результат - менее заметные слои и более высокое качество печати, " "но при этом увеличивается время печати." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Стандартная высота слоя для сопла 0.8 мм. Очень большая высота слоя, как " -"результат - чётко видимые слои, низкое качество печати и обычное время " -"печати." +"Высота слоя очень большая. Это приводит к появлению заметных линий между " +"слоями, низкому качеству печати и сокращению времени печати." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"По сравнению со стандартным профилем для сопла 0.8 мм, имеет немного большую " -"высоту слоя. Как результат - чётко видимые слои и гораздо более низкое " -"качество печати, но при этом в некоторых случаях сокращается время печати." +"По сравнению со стандартным профилем для сопла 0.8 мм, имеет большую высоту " +"слоя. Как результат - заметные слои и более низкое качество печати, но при " +"этом в некоторых случаях уменьшается время печати." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"По сравнению со стандартным профилем для сопла 0.8 мм, имеет гораздо большую " -"высоту слоя. Как результат - очень заметные слои и значительно более низкое " -"качество печати, но при этом в некоторых случаях значительно сокращается " -"время печати." +"По сравнению со стандартным профилем для сопла 0.8 мм, имеет сильно большую " +"высоту слоя. Как результат - очень заметные слои и более низкое качество " +"печати, но при этом в некоторых случаях уменьшается время печати." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "По сравнению со стандартным профилем для сопла 0.8 мм, имеет немного меньшую " "высоту слоя. Как результат - немного менее заметные слоя и немного более " @@ -16736,21 +20535,336 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" +"По сравнению со стандартным профилем для сопла 0.8 мм, имеет меньшую высоту " +"слоя. Как результат - менее заметные слои и немного более высокое качество " +"печати, но при этом в некоторых случаях увеличивается время печати." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "AMS отсутствует" + +msgid "There is no device available to send printing." +msgstr "Отсутствует устройство для отправки на печать." + +# ??? для начала печати необходимо, чтобы хотя бы один принтер был активен? Убедитесь, что хотя бы один принтер включён +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" +"Необходимо наличия хотя бы одного работающего принтера для выполнения задач " +"печати." + +msgid "Use External Spool" +msgstr "Исп. внешнюю катушку" + +msgid "Select Printers" +msgstr "Выбор принтеров" + +msgid "Device Name" +msgstr "Имя устройства" + +msgid "Device Status" +msgstr "Статус устройства" + +msgid "AMS Status" +msgstr "Статус AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Пожалуйста, выберите устройства, которыми хотите управлять (до 6 устройств)" + +msgid "Printing Options" +msgstr "Параметры печати" + +msgid "Bed Leveling" +msgstr "Выравнивание стола" + +msgid "Flow Dynamic Calibration" +msgstr "Калибровка динамики потока" + +msgid "Send Options" +msgstr "Параметры отправки" + +msgid "Send to" +msgstr "Отправить на" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"принтера(-ов) одновременно (зависит от того, сколько устройств может " +"нагреваться одновременно без перегрузки вашей электросети.)" + +msgid "Wait" +msgstr "Ждать" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"минут для отправки каждого пакета заданий (зависит от того, сколько времени " +"требуется для завершения нагрева перед началом печати.)" + +msgid "Task Sending" +msgstr "Отправка заданий" + +msgid "Task Sent" +msgstr "Отправленные задания" + +msgid "Edit multiple printers" +msgstr "Редактирование нескольких принтеров" + +msgid "Select connected printers (0/6)" +msgstr "Выберите подключённые принтеры (%d/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Выберите подключённые принтеры (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Максимальное количество принтеров, которое можно выбрать - %d" + +msgid "No task" +msgstr "Нет заданий" + +msgid "Edit Printers" +msgstr "Редактировать принтеры" + +msgid "Task Name" +msgstr "Имя задания" + +msgid "Actions" +msgstr "Действия" + +msgid "Task Status" +msgstr "Статус задания" + +msgid "Sent Time" +msgstr "Время отправки" + +msgid "There are no tasks to be sent!" +msgstr "Нет заданий для отправки!" + +msgid "No historical tasks!" +msgstr "История заданий пуста!" + +msgid "Upgrading" +msgstr "Обновление" + +msgid "syncing" +msgstr "синхронизация" + +msgid "Printing Finish" +msgstr "Печать завершена" + +msgid "Printing Failed" +msgstr "Ошибка печати" + +msgid "Printing Pause" +msgstr "Пауза печати" + +msgid "Pending" +msgstr "Ожидание" + +msgid "Sending" +msgstr "Отправка" + +msgid "Sending Finish" +msgstr "Отправка завершена" + +msgid "Sending Cancel" +msgstr "Отправка отменена" + +msgid "Sending Failed" +msgstr "Ошибка отправки" + +msgid "Print Success" +msgstr "Успешно напечатано" + +msgid "Print Failed" +msgstr "Ошибка печати" + +msgid "Removed" +msgstr "Удалено" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"По сравнению с профилем по умолчанию для сопла 0,8 мм, он имеет меньшую " -"высоту слоя, что приводит к меньшим, но все же заметным слоям и более " -"высокому качеству печати, и в некоторых случаях увеличению время печати." msgid "Connected to Obico successfully!" -msgstr "Подключение к Obico успешно установлено." +msgstr "Подключение к Obico успешно установлено!" msgid "Could not connect to Obico" msgstr "Не удалось подключиться к Obico" msgid "Connected to SimplyPrint successfully!" -msgstr "Подключение к SimplyPrint успешно установлено." +msgstr "Подключение к SimplyPrint успешно установлено!" msgid "Could not connect to SimplyPrint" msgstr "Не удалось подключиться к SimplyPrint" @@ -16766,11 +20880,11 @@ msgstr "" "Учётная запись SimplyPrint не привязана. Перейдите в раздел подключения для " "настройки." -msgid "Connection to Flashforge works correctly." -msgstr "Подключение к Flashforge успешно установлено." +msgid "Serial connection to Flashforge is working correctly." +msgstr "Serial соединение к Flashforge работает корректно." -msgid "Could not connect to Flashforge" -msgstr "Не удалось подключиться к Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "Невозможно подключиться к Flashforge через serial соединение" msgid "The provided state is not correct." msgstr "Указано неверное состояние." @@ -16783,9 +20897,114 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "При попытке войти произошла какая-то ошибка, попробуйте ещё раз." -msgid "User cancelled." +msgid "User canceled." msgstr "Отменено пользователем." +msgid "Head diameter" +msgstr "Диаметр уха" + +msgid "Max angle" +msgstr "Макс. угол" + +msgid "Detection radius" +msgstr "Радиус обнаружения" + +msgid "Remove selected points" +msgstr "Удалить выбранные" + +msgid "Remove all" +msgstr "Удалить все" + +msgid "Auto-generate points" +msgstr "Сгенерировать автоматически" + +msgid "Add a brim ear" +msgstr "Добавить «мышиные уши»" + +msgid "Delete a brim ear" +msgstr "Удалить «мышиные уши»" + +msgid "Adjust head diameter" +msgstr "Настройка диаметра головы" + +msgid "Adjust section view" +msgstr "Настройка вида сечения" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Предупреждение: если тип каймы не установлен на «Нарисовано», то мышиные уши " +"не будут работать!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Установите тип полей этого объекта на «окрашенный»." + +msgid " invalid brim ears" +msgstr " недействительные «мышиные уши»" + +msgid "Brim Ears" +msgstr "Кайма «мышиные уши»" + +msgid "Please select single object." +msgstr "Пожалуйста, выберите один объект." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16813,9 +21032,9 @@ msgid "" "Chamber temperature\n" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" -"Температура термокамеры\n" -"Знаете ли вы, что Snapmaker Orca поддерживает управление температурой в камере " -"принтера?" +"Температура в термокамере\n" +"Знаете ли вы, что Snapmaker Orca поддерживает управление температурой внутри " +"термокамеры принтера?" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -16832,7 +21051,7 @@ msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" -"Вспомогательный вентилятор для охлаждения моделей\n" +"Вспомогательный вентилятор модели\n" "Знаете ли вы, что Snapmaker Orca поддерживает управление вспомогательным " "вентилятором для охлаждения моделей?" @@ -16866,7 +21085,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Использование горячих клавиш\n" "Знаете ли вы, что в Snapmaker Orca имеется большой список горячих клавиш для " @@ -16913,16 +21132,16 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Авторасстановка\n" -"Знаете ли вы, что можно автоматически расставить все модели на вашем столе?" +"Знаете ли вы, что можно автоматически расставить все модели в вашем проекте?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Автоориентация\n" "Знаете ли вы, что можно повернуть модели в оптимальную для печати ориентацию " @@ -17015,7 +21234,7 @@ msgstr "" "Знаете ли вы, что можно улучшить качество печати, используя STEP файлы " "вместо STL?\n" "Snapmaker Orca поддерживает нарезку STEP файлов, что обеспечивает более точное " -"представление геометрии, чем при нарезке STL файлов." +"представление геометрии, чем при нарезке STL файлов. Попробуйте!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -17086,7 +21305,7 @@ msgstr "" "Различные типы поддержек\n" "Знаете ли вы, что можно выбрать один из нескольких типов поддержек? " "Древовидная поддержка отлично подходит для органических моделей, экономя при " -"этом материал и уменьшая время печати." +"этом материал и уменьшая время печати. Попробуйте их!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" @@ -17095,15 +21314,15 @@ msgid "" "successfully? Higher temperature and lower speed are always recommended for " "the best results." msgstr "" -"Печать блестящей пластиковой нитью\n" -"Знаете ли вы, что блестящая пластиковая нить требует особого внимания для " -"успешной печати? Для достижения наилучшего результата рекомендуется более " -"высокая температура и более низкая скорость печати." +"Печать блестящим филаментом\n" +"Знаете ли вы, что блестящий филамент требует особого внимания для успешной " +"печати? Для достижения наилучшего результата рекомендуется более высокая " +"температура и более низкая скорость печати." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Кайма для лучшей адгезии\n" @@ -17114,7 +21333,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Задание параметров для нескольких моделей\n" "Знаете ли вы, что можно задать параметры нарезки сразу для всех выбранных " @@ -17127,18 +21346,17 @@ msgid "" msgstr "" "Объединение моделей\n" "Знаете ли вы, что можно объединить несколько моделей в единую? Используйте " -"для этого команду «Объединить в сборку», выбрав несколько моделей." +"для этого команду «Объединить в сборку», выбрав несколько моделей?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" -"Очистка в поддержку/модель/заполнение\n" -"Знаете ли вы, что при смене пластиковой нити, можно сохранить материал, " -"который иначе попал бы на черновую башню, сбросив его в поддержку/модель/" -"заполнение?" +"Очистка в поддержке/модели/заполнинии\n" +"Знаете ли вы, что можно сэкономить филамент, очистить его в поддержке/модели/" +"заполнинии при замене филамента?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" @@ -17150,13 +21368,13 @@ msgstr "" "Знаете ли вы, что для повышения прочности модели можно увеличить количество " "периметров и плотность заполнения?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Когда необходимо печатать с открытой дверцей принтера?\n" "Знаете ли вы, что при печати низкотемпературным материалом при более высокой " @@ -17169,42 +21387,1432 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Предотвращение коробления материала\n" "Знаете ли вы, что при печати материалами, склонными к короблению, таких как " "ABS, повышение температуры подогреваемого стола может снизить эту " "вероятность?" -#~ msgid "Associate prusaslicer://" -#~ msgstr "Ассоциация c prusaslicer://" +#~ msgid "Junction Deviation calibration" +#~ msgstr "Калибровка отклонения соединений" -#~ msgid "Not associated to any application" -#~ msgstr "Нет ассоциации ни с одним приложением" +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Экструдер %d" #~ msgid "" -#~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " -#~ "models from Printable.com" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" #~ msgstr "" -#~ "Ассоциировать Snapmaker Orca с ссылками prusaslicer://, чтобы она могла " -#~ "открывать модели сразу с printable.com" +#~ "Максимальное значение junction deviation (M205 J, применяется только если " +#~ "JD > 0 для прошивки Marlin)" -#~ msgid "Associate bambustudio://" -#~ msgstr "Ассоциация c bambustudio://" +#~ msgid "Adaptive layer height" +#~ msgstr "Переменная высота слоёв" #~ msgid "" -#~ "Associate Snapmaker Orca with bambustudio:// links so that Orca can open " -#~ "models from makerworld.com" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." #~ msgstr "" -#~ "Ассоциировать Snapmaker Orca с ссылками bambustudio://, чтобы она могла " -#~ "открывать модели сразу с makerworld.com" +#~ "Включение автоматического расчёта высоты слоя древовидной поддержки, " +#~ "кроме первого слоя." -#~ msgid "Associate cura://" -#~ msgstr "Ассоциация c cura://" +#~ msgid "Junction Deviation test" +#~ msgstr "Тест Junction Deviation" + +#~ msgid "Start junction deviation: " +#~ msgstr "Начальное значение junction deviation: " + +#~ msgid "End junction deviation: " +#~ msgstr "Конечное значение junction deviation: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Настройки Deviation settings" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "" +#~ "Примечание: более низкие значения = более острые углы, но более низкая " +#~ "скорость" #~ msgid "" -#~ "Associate Snapmaker Orca with cura:// links so that Orca can open models from " -#~ "thingiverse.com" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" #~ msgstr "" -#~ "Ассоциировать Snapmaker Orca с ссылками bambustudio://, чтобы она могла " -#~ "открывать модели сразу с thingiverse.com" +#~ "Введите допустимые значения:\n" +#~ "(0 <= Junction Deviation < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "ПРИМЕЧАНИЕ: Высокие значения могут привести к смещению слоя" + +#~ msgid "AMS not connected" +#~ msgstr "AMS не подключен" + +#~ msgid "Ext Spool" +#~ msgstr "Внеш. катушка" + +#~ msgid "Guide" +#~ msgstr "Руководство" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Калибровка AMS…" + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Во время калибровки возникла проблема. Нажмите, чтобы посмотреть способ " +#~ "исправления проблемы." + +#~ msgid "Calibrate again" +#~ msgstr "Повторить калибровку" + +#~ msgid "Cancel calibration" +#~ msgstr "Отменить калибровку" + +#~ msgid "Feed Filament" +#~ msgstr "Подача филамента" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Перед печатью через локальную сеть необходимо вставить SD-карту." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Перед отправкой на принтер необходимо вставить SD-карту." + +# Примечание: выбор слотов ограничен одним типом материала. +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Примечание: можно выбирать только слоты с одинаковым типом материала." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "При наличии в AMS двух одинаковых материалов включается функция " +#~ "резервирования материала (автодозаправка).\n" +#~ "(В настоящее время поддерживается автоматическая дозаправка материала " +#~ "только одного производителя, типа и цвета)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS считывает информацию о материале Bambu и рассчитывает его остаточную " +#~ "ёмкость на катушке. Остаточная ёмкость обновляется автоматически в " +#~ "процессе печати." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Минимально рекомендуемая температура меньше 190 градусов или максимально " +#~ "рекомендуемая температура выше 300 градусов.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Режим «Спиральной вазы» работает только в том случае, если количество " +#~ "петель стен равно 1, поддержка отключена, количество верхних слоев " +#~ "оболочки равно 0, плотность разреженного заполнения равна 0, а тип " +#~ "покадровой съемки — традиционный." + +# Режим проверки XY-механики +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Проверка XY-механизма" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Приостановлено из-за окончания филамента" + +#~ msgid "Heating hotend" +#~ msgstr "Нагрев хотэнда" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Калибровка экструзии" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Печать приостановлена пользователем" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Пауза при падении передней крышки с головы" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Калибровка потока экструзии" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Пауза при неисправности температуры сопла" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Пауза при неисправности температуры стола" + +# ??? +#~ msgid "Skip step pause" +#~ msgstr "Пропуск команды паузы" + +#~ msgid "Motor noise calibration" +#~ msgstr "Калибровка шума двигателя" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Печать приостановлена из-за потери связи с AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "" +#~ "Печать приостановлена из-за низкой скорости вентилятора обдува радиатора " +#~ "головы" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "" +#~ "Печать приостановлена из-за ошибки контроля температуры внутри термокамеры" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Печать приостановлена G-кодом, вставленным пользователем" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Пауза при обнаружении протечки материала" + +#~ msgid "Cutter error pause" +#~ msgstr "Пауза из-за ошибки обрезки филамента" + +#~ msgid "First layer error pause" +#~ msgstr "Пауза при ошибке на первом слое" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Пауза при засорении сопла" + +#~ msgid "Fatal" +#~ msgstr "Критическая ошибка" + +#~ msgid "Serious" +#~ msgstr "Серьезный" + +#~ msgid "Common" +#~ msgstr "Обычный" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Текущая температура или целевая температура внутри термокамеры превышает " +#~ "45℃. Чтобы избежать засорения экструдера, запрещается загрузка " +#~ "низкотемпературной филамента (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "В экструдер загружается низкотемпературный филамент (PLA/PETG/TPU). Чтобы " +#~ "избежать засорения экструдера, запрещается устанавливать температуру " +#~ "внутри термокамеры выше 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Печать Bambu PET-CF/PA6-CF с помощью AMS не поддерживается." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Модель выходит за границы стола или превышает высоту печати.\n" +#~ "Пожалуйста, устраните проблему, уместив всю модель в границы стола (или " +#~ "за пределы стола) и убедитесь, что высота модели находится в пределах " +#~ "область построения." + +# ??? Перенёс на другую строку, проверить как отображается +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Вы можете найти его на принтере в разделе \n" +#~ "Настройки > Сеть > Код подключения, как показано на рисунке:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "На текущей версии прошивки просмотр файлов на SD-карте не поддерживается. " +#~ "Пожалуйста, обновите прошивку принтера." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Проверьте, вставлена ли SD-карта в принтер.\n" +#~ "Если она по-прежнему не читается, попробуйте отформатировать SD-карту." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "" +#~ "Просмотр файлов на SD-карте не поддерживается в режиме «Только LAN»." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Накопитель недоступен, вставьте SD-карту." + +#~ msgid "Cham" +#~ msgstr "Выдув" + +#~ msgid "Still unload" +#~ msgstr "Ещё выгружается" + +#~ msgid "Still load" +#~ msgstr "Ещё загружается" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Невозможно запустить без SD-карты." + +#~ msgid "Update" +#~ msgstr "Обновление" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Чувствительность" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Нет филаментов в AMS. Пожалуйста, выберите принтер на вкладке «Принтер», " +#~ "чтобы загрузить информацию о AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Синхронизация филамента с AMS удалит все текущие настройки филамента и " +#~ "цвета. Хотите продолжить?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Синхронизация уже выполнена. Хотите синхронизировать только изменения или " +#~ "заново синхронизировать всё?" + +#~ msgid "Sync" +#~ msgstr "Только изменения" + +#~ msgid "Resync" +#~ msgstr "Всё" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Имеется несколько неизвестных материалов, сопоставленных с общим " +#~ "профилем. Обновите или перезапустите Snapmaker Orca, чтобы проверить наличие " +#~ "обновлений системных профилей." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Вы уверены, что хотите сохранить исходные SVG файлы с их локальными " +#~ "путями в 3MF файле?\n" +#~ "Если нажмете «НЕТ», все SVG файлы в проекте больше не будут доступны для " +#~ "редактирования." + +#~ msgid "Private protection" +#~ msgstr "Частная охрана" + +#~ msgid "General Settings" +#~ msgstr "Общие настройки" + +#~ msgid "Login Region" +#~ msgstr "Регион входа" + +#~ msgid "Stealth Mode" +#~ msgstr "Режим конфиденциальности (отключение телеметрии Bambulab)" + +#~ msgid "Use legacy network plugin (Takes effect after restarting Orca)" +#~ msgstr "" +#~ "Использовать устаревший сетевой плагин (изменение вступит в силу после " +#~ "перезапуска Snapmaker Orca)" + +#~ msgid "Default Page" +#~ msgstr "Страница по умолчанию" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Показывать уведомление с полезным советом при запуске приложения" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "" +#~ "Если включено, будут показываться уведомления с полезном советом при " +#~ "запуске приложения." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Объём очистки: автопересчёт при каждом изменении цвета." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Если включено, выполняется автоматический перерасчёт объёма очистки при " +#~ "каждом изменении цвета." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "Объём очистки: автопересчёт при каждой смене филамента." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Если включено, выполняется автоматический перерасчёт объёма очистки при " +#~ "каждой смене филамента" + +#~ msgid "Show the step mesh parameter setting dialog." +#~ msgstr "Показывать диалоговое окно настройки сетки при импорте STEP файла." + +#~ msgid "Multi-device Management (Take effect after restarting Snapmaker Orca)." +#~ msgstr "" +#~ "Управление несколькими устройствами (вступает в силу после перезапуска " +#~ "Snapmaker Orca)." + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Авторасстановка моделей на печатной пластине при клонировании" + +#~ msgid "Network" +#~ msgstr "Сеть" + +#~ msgid "User Sync" +#~ msgstr "Синхронизация пользовательских данных" + +#~ msgid "System Sync" +#~ msgstr "Синхронизация системных данных" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Ассоциировать URL-адреса с Snapmaker Orca" + +# нее влезает Поведение при открытии +#~ msgid "Load Behaviour" +#~ msgstr "Поведение при открытии" + +#~ msgid "Add model files (stl/step) to recent file list." +#~ msgstr "Добавить файлы модели (stl/step) в список последних файлов." + +#~ msgid "No warnings when loading 3MF with modified G-code" +#~ msgstr "" +#~ "Отключить предупреждения при загрузке 3MF с модифицированным G-кодом" + +#~ msgid "Auto-Backup" +#~ msgstr "Автосоздание резервной копии" + +#~ msgid "every" +#~ msgstr "каждые" + +#~ msgid "Downloads" +#~ msgstr "Загрузки" + +#~ msgid "Dark Mode" +#~ msgstr "Тёмная тема" + +#~ msgid "Enable Dark mode" +#~ msgstr "Включить тёмную тему" + +#~ msgid "Home page and daily tips" +#~ msgstr "Домашняя страница и ежедневные советы" + +#~ msgid "Show home page on startup" +#~ msgstr "Показывать домашнюю страницу при запуске" + +#~ msgid "Please choose the filament color" +#~ msgstr "Пожалуйста, выберите цвет филамента" + +#~ msgid "Send print job to" +#~ msgstr "Отправка задания на печать" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Количество филамента %s превышает количество слотов AMS. Обновите " +#~ "прошивку принтера для возможности назначения слотов AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Количество пластиковых нитей превышает количество слотов AMS. Обновите " +#~ "прошивку принтера, чтобы получить поддержку функции назначения слотов AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Соответствия между материалами и слотами AMS были установлены. Вы можете " +#~ "нажать на филамент выше, чтобы вручную задать для неё нужный слот AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Перед отправкой задания на печать, нажмите на каждый филамент, чтобы " +#~ "вручную задать для неё нужный слот AMS" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Текущая прошивка принтера поддерживает только последовательное " +#~ "сопоставление филамента => слот AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Перед печатью необходимо вставить SD-карту." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Для записи таймлапсов необходимо вставить SD-карту." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "сопло в профиле: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "сопло сохранённое: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Диаметр сопла в нарезанном файле не соответствует сохранённому. Если вы " +#~ "недавно меняли сопло, перейдите на вкладку Принтер > Части принтера, " +#~ "чтобы изменить настройки." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Печать высокотемпературным материалом (%s) с %s может привести к " +#~ "повреждению сопла" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Подключение к принтеру. Невозможно отменить во время процесса подключения." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Внимание! Калибровка потока на текстурированной пластине с PEI покрытием " +#~ "может быть неудачной из-за шероховатой поверхности." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Автокалибровка потока с помощью микролидара" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Отправить на SD-карту принтера" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Перед отправкой на SD-карту, сначала вставьте её в принтер." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Принтер не поддерживает отправку на SD-карту." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Количество цветов должно быть в диапазоне [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Текущие цвета филамента:" + +#~ msgid "Quick set:" +#~ msgstr "Быстрый выбор:" + +# ?????? Добавить сменный экструдер после существующих экструдеров, Добавить используемый экструдер после существующих экструдеров, Добавьте новый экструдер после существующих экструдеров, Добавить экструдер с расходным материалом после существующих экструдеров. +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "" +#~ "Добавить экструдер с расходными материалами после существующих " +#~ "экструдеров." + +#~ msgid "Cluster colors" +#~ msgstr "Цветовой кластер" + +# ??? Цвет прутка +#~ msgid "Map Filament" +#~ msgstr "Выбранные цвета" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Примечание: цвета уже выбраны, вы можете нажать «OK» \n" +#~ "для продолжения или подобрать его вручную." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Предупреждение: количество новых\n" +#~ "и текущих экструдеров превышает 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Авторасчёт" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca будет пересчитывать объёмы очистки каждый раз при изменении цвета " +#~ "филаментов. Вы можете отключить автоматический расчёт в разделе Orca " +#~ "Slicer > Параметры" + +#~ msgid "unloaded" +#~ msgstr "выгрузку" + +#~ msgid "loaded" +#~ msgstr "загрузку" + +#~ msgid "Filament #" +#~ msgstr "Филамент #" + +#~ msgid "From" +#~ msgstr "С" + +#~ msgid "To" +#~ msgstr "На" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Возобновить печать (допустимы дефекты)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Возобновить печать (проблема решена)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "1) Пожалуйста, убедитесь, что Snapmaker Orca и ваш принтер находятся в одной " +#~ "локальной сети." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2) Если указанные ниже IP-адрес и код доступа отличаются от фактических " +#~ "значений вашего принтера, исправьте их." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "3) Найдите и введите серийный номер принтера (его можно найти в " +#~ "информации об устройстве на экране принтера)." + +#~ msgid "Laser 10 W" +#~ msgstr "Лазер 10 Вт" + +#~ msgid "Laser 40 W" +#~ msgstr "Лазер 40 Вт" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " находится слишком близко к другим моделям, что может привести к колизии " +#~ "при печати." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Не допускается совместная печать несколькими материалами, имеющими " +#~ "большую разницу в температуре печати. Это может привести к засорению и " +#~ "повреждению сопла и экструдера." + +#~ msgid "Ironing angle" +#~ msgstr "Угол разглаживания" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Выбор угла разглаживания. Отрицательное число отключает эту функцию и " +#~ "использует метод по умолчанию." + +#~ msgid "Remove small overhangs" +#~ msgstr "Игнорировать небольшие нависания" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "" +#~ "Не печатать поддержку для небольших нависаний, которые могут обойтись без " +#~ "неё." + +#~ msgid "Width of the brim." +#~ msgstr "Ширина полей." + +# ??? было Можно сохранить только один результат с одинаковым именем. Вы уверены, что хотите перезаписать другие результаты? +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Результаты с одинаковыми именами будут перезаписаны. Подтвердить действие?" + +#~ msgid "External Spool" +#~ msgstr "Внешняя катушка" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Введите допустимые значения:\n" +#~ "Начальная температура: <= 350\n" +#~ "Конечная температура: >= 180\n" +#~ "Начальная температура > Конечная температура + 5)" + +# ??? При установке значения... +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Рекомендация: установите значение затухания (Damp) равным 0, тогда " +#~ "будет \n" +#~ "использоваться значение по умолчанию из принтера или последнее " +#~ "сохранённое значение." + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "Пожалуйста, введите имя и модель пользовательского принтера." + +#~ msgid "BigTraffic" +#~ msgstr "BigTraffic" + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "сопло в профиле: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Диаметр сопла в профиле не соответствует сохранённому \n" +#~ "в памяти диаметру сопла. Вы недавно сменили сопло?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*Печать %s материалом с %s может привести к повреждению сопла" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Повышение точности оболочки за счёт регулировки расстояния между внешними " +#~ "стенками. Это также позволяет уменьшить расслоение слоёв." + +#~ msgid "Enable filament ramming." +#~ msgstr "Включить рэмминг прутка." + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Колесо мыши" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Колесо мыши" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + Левая кнопка мыши" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Мышь вверх или вниз" + +#~ msgid "Left mouse button:" +#~ msgstr "Левая кнопка мыши:" + +#~ msgid "Right mouse button:" +#~ msgstr "Правая кнопка мыши:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + Левая кнопка мыши:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + Правая кнопка мыши:" + +#~ msgid "Recent projects" +#~ msgstr "Недавние проекты" + +#~ msgid "Maximum recent projects" +#~ msgstr "Максимальное количество недавних проектов" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "" +#~ "Максимальное количество проектов, отображаемое в списке недавних проектов." + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘ + Любая стрелка" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥ + Левая кнопка мыши" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘ + Левая кнопка мыши" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl + Любая стрелка" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt + Левая кнопка мыши" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl + Левая кнопка мыши" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift + Левая кнопка мыши" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift + Любая стрелка" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Колесо мыши" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Колесо мыши" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Колесо мыши" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Колесо мыши" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift + Колесо мыши" + +#~ msgid "" +#~ "This parameter adds a rotation of sparse infill direction to each layer " +#~ "according to the specified template. The template is a comma-separated " +#~ "list of angles in degrees, e.g. '0,90'. The first angle is applied to the " +#~ "first layer, the second angle to the second layer, and so on. If there " +#~ "are more layers than angles, the angles will be repeated. Note that not " +#~ "all sparse infill patterns support rotation." +#~ msgstr "" +#~ "Этот параметр поворачивает шаблон разреженного заполнения на каждом слое " +#~ "по заданному правилу. Шаблон представляет собой список углов в градусах, " +#~ "разделенных запятыми, например '0,90'. Первый угол применяется к первому " +#~ "слою, второй угол - ко второму слою и так далее. Если слоёв больше, чем " +#~ "углов, то углы будут повторяться. Обратите внимание, что не все шаблоны с " +#~ "разреженной заливкой поддерживают поворот." + +#~ msgid "Set Position" +#~ msgstr "Задание позиции" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Нажмите правой кнопкой мыши на значок, чтобы починить модель." + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "Целевая модель едина и не может быть разделена на части." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "℃" + +#~ msgid "mm³" +#~ msgstr "мм³" + +#~ msgid "Color Scheme" +#~ msgstr "Цветовая схема" + +#~ msgid "Percent" +#~ msgstr "%" + +#~ msgid "Used filament" +#~ msgstr "Использ. прутка" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Дополнительно..." + +#~ msgid "More calibrations" +#~ msgstr "Больше калибровок" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SD-карта" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Отсутствует SD-карта" + +#~ msgid "SD Card Abnormal" +#~ msgstr "Неисправность SD-карты" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Не удалось извлечь устройство %s(%s)." + +#~ msgid "mm/s²" +#~ msgstr "мм/с²" + +#~ msgid "mm/s" +#~ msgstr "мм/с" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Поведение при открытии можно изменить позже в настройках приложения." + +#~ msgid "Invalid number" +#~ msgstr "Неправильное числовое значение" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "сопло сохранённое: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Температура стола при установленной не нагреваемой пластине Supertack. 0 " +#~ "означает, что пластиковая нить не поддерживает печать на этой печатной " +#~ "пластине." + +#~ msgid "Ramming settings" +#~ msgstr "Настройки рэмминга" + +#~ msgid "Profile dependencies" +#~ msgstr "Зависимости профиля" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "пакет профилей несовместим с текущим приложением." + +#~ msgid "Total ramming time" +#~ msgstr "Общее время рэмминга" + +#~ msgid "s" +#~ msgstr "с" + +#~ msgid "Total rammed volume" +#~ msgstr "Общий объём при рэмминге" + +#~ msgid "Ramming line width" +#~ msgstr "Ширина линии при рэмминге" + +#~ msgid "Ramming line spacing" +#~ msgstr "Расстояние между линиями при рэмминге" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "Продолжить" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Классический режим" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Включите эту опцию для использования классического режима." + +#~ msgid "Compatible machine" +#~ msgstr "Совместимые принтеры" + +#~ msgid "Compatible machine condition" +#~ msgstr "Состояние совместимой машины" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Состояние совместимых профилей процессов" + +#~ msgid "Default filament color" +#~ msgstr "Цвет материла по умолчанию" + +#~ msgid "mm³/s" +#~ msgstr "мм³/с" + +#~ msgid "g/cm³" +#~ msgstr "г/см³" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Поворот сплошного заполнения" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "" +#~ "Разрешить поворот шаблона сплошного заполнение на 90° на каждом слое." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Модель представлена в виде разделенных запятыми пар значений, длины " +#~ "экструзии и поправочного коэффициента потока, по одному на строку в " +#~ "следующем формате: \"1.234,5.678\"." + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Это наибольшая высота печатаемого слоя для этого экструдера, которая " +#~ "используется для ограничения функции «Переменная высота слоёв»." + +#~ msgid "mm³/s²" +#~ msgstr "мм³/с²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Это наименьшая высота печатаемого слоя для данного экструдера и в то же " +#~ "время нижний предел для функции «Переменная высота слоёв»." + +#~ msgid "mm²" +#~ msgstr "мм²" + +# ??? поверхности +#~ msgid "Retract on top layer" +#~ msgstr "Откат на верхнем слое" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Эта опция включает принудительный откат на верхнем слое.\n" +#~ "Отключение может предотвратить засорение сопла при печати очень медленных " +#~ "шаблонов заполнения, например, при шаблоне «кривая Гильберта»." + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Некоторое количество материала в экструдере откатывается назад, чтобы " +#~ "избежать его течи при длительном перемещении. 0 - отключение отката." + +#~ msgid "Speed of retractions." +#~ msgstr "Скорость извлечения материала при откате." + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Скорость возврата материала при откате. Если оставить 0, будет " +#~ "использоваться та же скорость что и при извлечении." + +#~ msgid "Single loop draft shield" +#~ msgstr "Одностеночный защитный кожух" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "После первого слоя защитный кожух будет имеет только одну стенку. Это " +#~ "может помочь сэкономить материал, но есть риск, что кожух деформируется " +#~ "или треснет." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Расстояние между линиями связующего слоя сверху." + +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Если элементы модели тоньше заданного здесь значения, они не будут " +#~ "напечатаны. Если же их толщина превышает этот порог, но не достигает " +#~ "минимальной ширины периметра, они автоматически расширяются до указанного " +#~ "минимума, равного значению «Минимальная ширина периметра». Если задано в " +#~ "процентах, то значение вычисляется относительно диаметра сопла.\n" +#~ "\n" +#~ "Например, расчёт при значении 25% и сопле 0,4 мм: 0,4 мм × 25% = 0,1 мм. " +#~ "Следовательно, при значении параметра 25% и сопле 0,4 мм элементы " +#~ "толщиной до 0,1 мм не напечатаются. Элементы же толщиной от 0,1 мм и выше " +#~ "расширяются до минимальной ширины периметра, указанной ниже." + +#~ msgid "Downward machines settings" +#~ msgstr "Настройки совместимости принтера" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Загрузить идентификаторы прутков для каждого объекта" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Мы добавили функцию автоматической калибровки для различных материалов, " +#~ "которая полностью автоматизирована, а результат калибровки сохраняется в " +#~ "принтере для дальнейшего использования. Калибровка требуется только в " +#~ "следующих ограниченных случаях:\n" +#~ "1. При использовании нового материала другого производителя/типа или при " +#~ "отсыревании материала;\n" +#~ "2. При износе сопла или его замене на новое;\n" +#~ "3. При изменении в настройках материала максимального объёмного расхода " +#~ "или температуры печати." + +#~ msgid "step: " +#~ msgstr "Шаг изменения: " + +#~ msgid "mm/mm" +#~ msgstr "мм/мм" + +#~ msgid "Load STL" +#~ msgstr "Загрузить STL" + +#~ msgid "Load svg" +#~ msgstr "Загрузить svg" + +#~ msgid "Back Page 1" +#~ msgstr "Вернуться на 1-ю страницу" + +#~ msgid "Delete Filament" +#~ msgstr "Удалить пруток" + +#~ msgid "Refresh Printers" +#~ msgstr "Обновить принтеры" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "По сравнению со стандартным профилем для сопла 0.2 мм, имеет меньшую " +#~ "высоту слоя, что обеспечивает практически незаметные слои и более высокое " +#~ "качество печати, но при этом увеличивается время печати." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "По сравнению со стандартным профилем для сопла 0.2 мм, имеет наименьшую " +#~ "высоту слоя, что обеспечивает незаметные слои и гораздо более высокое " +#~ "качество печати, но при этом увеличивается время печати." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Стандартная высота слоя для сопла 0.8 мм. Очень большая высота слоя, как " +#~ "результат - чётко видимые слои, низкое качество печати и обычное время " +#~ "печати." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "По сравнению со стандартным профилем для сопла 0.8 мм, имеет немного " +#~ "большую высоту слоя. Как результат - чётко видимые слои и гораздо более " +#~ "низкое качество печати, но при этом в некоторых случаях сокращается время " +#~ "печати." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "По сравнению со стандартным профилем для сопла 0.8 мм, имеет гораздо " +#~ "большую высоту слоя. Как результат - очень заметные слои и значительно " +#~ "более низкое качество печати, но при этом в некоторых случаях значительно " +#~ "сокращается время печати." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "По сравнению с профилем по умолчанию для сопла 0,8 мм, он имеет меньшую " +#~ "высоту слоя, что приводит к меньшим, но все же заметным слоям и более " +#~ "высокому качеству печати, и в некоторых случаях увеличению время печати." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Подключение к Flashforge успешно установлено." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Не удалось подключиться к Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Установить тип каймы на «Нарисовано»." + +#~ msgid "" +#~ "This parameter smooths out sudden extrusion rate changes that happen when " +#~ "the printer transitions from printing a high flow (high speed/larger " +#~ "width) extrusion to a lower flow (lower speed/smaller width) extrusion " +#~ "and vice versa.\n" +#~ "\n" +#~ "It defines the maximum rate by which the extruded volumetric flow in mm3/" +#~ "sec can change over time. Higher values mean higher extrusion rate " +#~ "changes are allowed, resulting in faster speed transitions.\n" +#~ "\n" +#~ "A value of 0 disables the feature.\n" +#~ "\n" +#~ "For a high speed, high flow direct drive printer (like the Bambu lab or " +#~ "Voron) this value is usually not needed. However it can provide some " +#~ "marginal benefit in certain cases where feature speeds vary greatly. For " +#~ "example, when there are aggressive slowdowns due to overhangs. In these " +#~ "cases a high value of around 300-350mm3/s2 is recommended as this allows " +#~ "for just enough smoothing to assist pressure advance achieve a smoother " +#~ "flow transition.\n" +#~ "\n" +#~ "For slower printers without pressure advance, the value should be set " +#~ "much lower. A value of 10-15mm3/s2 is a good starting point for direct " +#~ "drive extruders and 5-10mm3/s2 for Bowden style.\n" +#~ "\n" +#~ "This feature is known as Pressure Equalizer in Prusa slicer.\n" +#~ "\n" +#~ "Note: this parameter disables arc fitting." +#~ msgstr "" +#~ "Этот параметр сглаживает резкие изменения скорости экструзии, которые " +#~ "происходят, когда принтер переходит от печати с большим расходом (высокая " +#~ "скорость/большая ширина) к печати с меньшим расходом (меньшая скорость/" +#~ "меньшая ширина) и наоборот.\n" +#~ "\n" +#~ "Параметр задаёт максимальную скорость, с которой объёмный расход " +#~ "экструдируемого материала может изменяться с течением времени. Более " +#~ "высокие значения означают, что допускаются более высокие изменения " +#~ "скорости экструзии, что приводит к более быстрому переключению " +#~ "скоростей.\n" +#~ "\n" +#~ "Значение 0 отключает эту функцию.\n" +#~ "\n" +#~ "Для высокоскоростных принтеров с высокопроизводительным директ-" +#~ "экструдером (например, Bambu lab или Voron) обычно не требуется " +#~ "использование данного параметра. Однако в некоторых случаях, когда " +#~ "скорость печати сильно различается, это может принести некоторую " +#~ "дополнительную пользу. Например, когда происходят резкие замедления из-за " +#~ "нависаний. В этих случаях рекомендуется использовать высокое значение, " +#~ "составляющее около 300-350 мм³/с², так как это обеспечивает достаточное " +#~ "сглаживание, помогающее прогнозированию давления достичь более плавного " +#~ "перехода потока.\n" +#~ "\n" +#~ "Для более медленных принтеров, не использующих прогнозирование давления " +#~ "(pressure advance), это значение должно быть значительно ниже. Значение " +#~ "10-15 мм³/с² является хорошей отправной точкой для экструдеров с прямым " +#~ "приводом и 5-10 мм³/с² для боуден экструдеров.\n" +#~ "\n" +#~ "В Prusa Slicer эта функция известна как «Сглаживание расхода» (Pressure " +#~ "equalizer).\n" +#~ "\n" +#~ "Примечание: этот параметр отключает аппроксимацию дугами." + +#~ msgid "" +#~ "The maximum print speed when purging in the wipe tower and printing the " +#~ "wipe tower sparse layers. When purging, if the sparse infill speed or " +#~ "calculated speed from the filament max volumetric speed is lower, the " +#~ "lowest will be used instead.\n" +#~ "\n" +#~ "When printing the sparse layers, if the internal perimeter speed or " +#~ "calculated speed from the filament max volumetric speed is lower, the " +#~ "lowest will be used instead.\n" +#~ "\n" +#~ "Increasing this speed may affect the tower's stability as well as " +#~ "increase the force with which the nozzle collides with any blobs that may " +#~ "have formed on the wipe tower.\n" +#~ "\n" +#~ "Before increasing this parameter beyond the default of 90mm/sec, make " +#~ "sure your printer can reliably bridge at the increased speeds and that " +#~ "ooze when tool changing is well controlled.\n" +#~ "\n" +#~ "For the wipe tower external perimeters the internal perimeter speed is " +#~ "used regardless of this setting." +#~ msgstr "" +#~ "Максимальная скорость печати при очистке в черновую башню и печати её " +#~ "разреженных слоёв.\n" +#~ "Во время очистки программа сопоставляет скорость разреженного заполнения " +#~ "и скорость, рассчитанную по 'максимальному объёмному расходу', и " +#~ "использует наименьшую.\n" +#~ "При печати разреженных слоёв программа сопоставляет скорость внутренних " +#~ "периметров и скорость, рассчитанную по 'максимальному объёмному расходу', " +#~ "и также использует наименьшую.\n" +#~ "\n" +#~ "Увеличение этой скорости может повлиять на устойчивость башни, а также " +#~ "увеличить силу, с которой сопло сталкивается с любыми наплывами, которые " +#~ "могли образоваться на черновой башне.\n" +#~ "\n" +#~ "Перед увеличением этого параметра выше значения по умолчанию 90 мм/с " +#~ "убедитесь, что ваш принтер может надежно строить мосты на повышенных " +#~ "скоростях и что отсутствует подтекание при смене инструмента.\n" +#~ "\n" +#~ "Для внешних периметров черновой башни всегда используется скорость " +#~ "внутренних периметров, независимо от значения данного параметра." + +#~ msgid "Start X: " +#~ msgstr "Начальная по X:" + +#~ msgid "End X: " +#~ msgstr "Конечная по X:" + +#~ msgid "Start Y: " +#~ msgstr "Начальная по Y:" + +#~ msgid "End Y: " +#~ msgstr "Конечная по Y:" + +#~ msgid "Damp Start/End: " +#~ msgstr "Начальное/Конечное значение затухания:" + +#~ msgid "" +#~ "Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1) " +#~ msgstr "" +#~ "Введите допустимый коэффициент затухания (0 <= Начальное значение " +#~ "затухания < Конечное значение затухания <= 1) " + +# если нужно короче то Грань-грань +#~ msgid "Face and face assembly" +#~ msgstr "Сборка по граням" + +# если нужно короче то Точка-точка +#~ msgid "Point and point assembly" +#~ msgstr "Сборка по точкам" + +#~ msgid "Unselect" +#~ msgstr "Отменить выбор" + +#~ msgid "Please select at least two volumes." +#~ msgstr "Выберите хотя бы две модели." + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Ошибка инициализации (подключённое устройство не готово)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "Ошибка инициализации (хранилище недоступно, вставьте SD-карту)!" + +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Ошибка инициализации (%s)!" + +#~ msgid "Stagger perimeters" +#~ msgstr "Сдвиг периметров" + +# ??? Экспериментальная функция, которая позволяет печатать чётные периметры относительно нечётных с перекрытием/со смещением... +#~ msgid "" +#~ "This is an experminetal feature that allows you to print staggered " +#~ "perimeters for better layer adhesion and strength." +#~ msgstr "" +#~ "Экспериментальная функция, которая позволяет печатать чередующиеся " +#~ "периметры с перекрытием для улучшения межслойного сцепления и увеличения " +#~ "прочности напечатанного." + +#~ msgid "" +#~ "Staggered perimeters is an experimental feature and only works when the " +#~ "First layer height is the same as Layer height, Top surface line width is " +#~ "the same as Outer wall line width and only for Arachne" +#~ msgstr "" +#~ "Сдвиг периметров - экспериментальная функция, которая работает только " +#~ "тогда, когда:\n" +#~ "- высота первого слоя совпадает с высотой слоя\n" +#~ "- ширина линии верхней поверхности совпадает с шириной линии внешней " +#~ "стены\n" +#~ "- включен только с генератором периметров Arachne" + +#~ msgid "" +#~ "Change these settings automatically?\n" +#~ "Yes - Change these settings and enable staggered perimeters\n" +#~ "No - Give up using staggered perimeters this time" +#~ msgstr "" +#~ "Изменить эти настройки автоматически? \n" +#~ "Да - Изменить эти настройки и включить сдвиг периметров\n" +#~ "Нет - Отказаться от использования сдвига периметров" + +# ??? Сеточная структура для предотвращения коробления, Предотвращение коробления, Сетка от деформации +#~ msgid "Gridify Anti-warping" +#~ msgstr "Антидеформационная сетка" + +#~ msgid "Split object into grids to avoid wrapping" +#~ msgstr "" +#~ "Разделение модели на блоки сеткой, чтобы внутреннее напряжение сжимало " +#~ "каждый блок по отдельности, а общая деформация была сведена к минимуму." + +#~ msgid "Gridify pattern direction" +#~ msgstr "Угол поворота сетки" + +#~ msgid "Angle for gridify pattern" +#~ msgstr "Угол поворота всего сетчатого шаблона." + +# ??? зачем зазор то писать? +#~ msgid "Gridify gap width" +#~ msgstr "Ширина линий сетки" + +# ??? Слоёв сетки ... Т.е. высота по другому... Высота сетки +#~ msgid "Gridify pattern layers" +#~ msgstr "Высота линий сетки" + +#~ msgid "" +#~ "The number of layers the grid pattern repeats before shifting position" +#~ msgstr "Количество слоёв повторения сетки перед её смещением." + +#~ msgid "Gridify grid size" +#~ msgstr "Размер ячейки сетки" + +#~ msgid "Gridify inset" +#~ msgstr "Границы сетки" + +#~ msgid "" +#~ "The distance to keep from the edges. A value of 0 create holes on walls" +#~ msgstr "" +#~ "Расстояние от краёв модели. При значении 0 на стенах будут иметься " +#~ "отверстия." + +#~ msgid "Support Ironing" +#~ msgstr "Разглаживание поддержки" + +#~ msgid "X Start/End:" +#~ msgstr "Начальная/Конечная по X:" + +#~ msgid "Y Start/End:" +#~ msgstr "Начальная/Конечная по Y:" + +#~ msgid "Rib" +#~ msgstr "Рёбра" + +#~ msgid "The wall of prime tower will fillet" +#~ msgstr "Скругление углов стенки черновой башни." + +#~ msgid "" +#~ "Density of the bottom surface layer. Intended for aesthetic or functional " +#~ "purposes, not to fix issues such as over-extrusion." +#~ msgstr "" +#~ "Плотность нижней поверхности. Эта функция предназначена для улучшения " +#~ "внешнего вида или функциональности объекта, но не для решения проблем, " +#~ "таких как чрезмерная экструзия." + +#~ msgid "Right click to reset value to system default." +#~ msgstr "Правая кнопка мыши - сброс значения до системного по умолчанию." \ No newline at end of file diff --git a/localization/i18n/sv/Snapmaker_Orca_sv.po b/localization/i18n/sv/Snapmaker_Orca_sv.po index 8f8734c7a3..d54b5b675a 100644 --- a/localization/i18n/sv/Snapmaker_Orca_sv.po +++ b/localization/i18n/sv/Snapmaker_Orca_sv.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -11,11 +11,121 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" "X-Generator: Localazy (https://localazy.com)\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU stöds inte av AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Fuktig PVA blir flexibel och fastnar i AMS, var noga med att torka den väl " +"före användning." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"CF/GF-trådar är hårda och spröda, så de kan lätt gå sönder eller fastna i en " +"AMS; använd dem med försiktighet." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Temperatur" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Inaktiv" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Serienummer:" + +msgid "Version:" +msgstr "Version:" + +msgid "Latest version" +msgstr "Senaste version" + +msgid "Support Painting" msgstr "Färgläggning av Support" -msgid "Alt + Mouse wheel" -msgstr "Alt + mushjul" +msgid "Ctrl+" +msgstr "Ctrl +" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Mus hjul" msgid "Section view" msgstr "Sektionsvy" @@ -23,9 +133,6 @@ msgstr "Sektionsvy" msgid "Reset direction" msgstr "Återställ riktning" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Mushjul" - msgid "Pen size" msgstr "Penn storlek" @@ -41,9 +148,6 @@ msgstr "Höger musknapp" msgid "Block supports" msgstr "Blockera support" -msgid "Shift + Left mouse button" -msgstr "Shift + Vänster musknapp" - msgid "Erase" msgstr "Radera" @@ -107,7 +211,7 @@ msgstr "Lägg på yta" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Filamentåtgången överstiger det maximala antalet som målningsverktyget " @@ -150,12 +254,21 @@ msgstr "Hinkfyllning" msgid "Height range" msgstr "Höjd intervall" -msgid "Alt + Shift + Enter" -msgstr "Alt + Skift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" msgstr "Växla Wireframe" +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Avbryt" + msgid "Shortcut Key " msgstr "Snabbkommando " @@ -178,9 +291,33 @@ msgstr "Ta bort färgläggning" msgid "Painted using: Filament %1%" msgstr "Färgläggning använder: Filament %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Pensel storlek" + +msgid "Brush shape" +msgstr "Pensel form" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Flytta" +msgid "Please select at least one object." +msgstr "" + msgid "Gizmo-Move" msgstr "" @@ -211,14 +348,20 @@ msgstr "i" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Position" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Rotation" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Skalnings förhållande" @@ -235,9 +378,6 @@ msgstr "Översätt" msgid "Group Operations" msgstr "Grupp Åtgärder" -msgid "Set Position" -msgstr "Ställ in Position" - msgid "Set Orientation" msgstr "Ställ in Orientering" @@ -250,22 +390,31 @@ msgstr "Återställ Position" msgid "Reset Rotation" msgstr "Återställ Rotation" -msgid "World coordinates" -msgstr "Världskoordinater" - msgid "Object coordinates" msgstr "" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Världskoordinater" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Storlek" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "enhetlig skala" @@ -300,7 +449,7 @@ msgid "Square" msgstr "Kvadrat" msgid "Hexagon" -msgstr "Hexagon" +msgstr "" msgid "Keep orientation" msgstr "Behåll orienteringen" @@ -329,6 +478,12 @@ msgstr "Form" msgid "Depth" msgstr "Djup" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Rotation" + msgid "Groove" msgstr "Spår" @@ -424,9 +579,6 @@ msgstr "" msgid "Confirm connectors" msgstr "Bekräfta kontakterna" -msgid "Cancel" -msgstr "Avbryt" - msgid "Build Volume" msgstr "" @@ -582,14 +734,10 @@ msgstr "%d trianglar" msgid "Show wireframe" msgstr "Visa trådram" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Kan inte tillämpas när processen förhandsgranskas." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Åtgärden avbryts redan. Vänligen vänta." msgid "Face recognition" @@ -598,12 +746,6 @@ msgstr "Ansiktsigenkänning" msgid "Perform Recognition" msgstr "Utför igenkänning" -msgid "Brush size" -msgstr "Pensel storlek" - -msgid "Brush shape" -msgstr "Pensel form" - msgid "Enforce seam" msgstr "Tvinga söm" @@ -640,7 +782,7 @@ msgid "Angle" msgstr "Vinkel" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "Inbäddat djup" @@ -653,8 +795,8 @@ msgstr "Yta" msgid "Horizontal text" msgstr "Vågrät text" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Mus flytta uppåt eller nedåt" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Rotera text" @@ -777,7 +919,7 @@ msgid "Change Text Type" msgstr "" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "" msgid "Name can't be empty." @@ -908,7 +1050,7 @@ msgstr "Vänster" msgctxt "Alignment" msgid "Center" -msgstr "Center" +msgstr "" msgctxt "Alignment" msgid "Right" @@ -966,7 +1108,7 @@ msgstr "" msgid "Undo rotation" msgstr "" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -984,10 +1126,14 @@ msgstr "" msgid "Orient the text towards the camera." msgstr "" +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" msgid "No symbol" @@ -1100,11 +1246,11 @@ msgstr "" msgid "Undefined stroke type" msgstr "" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" @@ -1112,7 +1258,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" @@ -1142,7 +1288,7 @@ msgstr "" msgid "Change file" msgstr "" -msgid "Change to another .svg file" +msgid "Change to another SVG file." msgstr "" msgid "Forget the file path" @@ -1167,7 +1313,7 @@ msgstr "" msgid "Save SVG file" msgstr "" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "" msgid "Size in emboss direction." @@ -1235,60 +1381,64 @@ msgstr "" msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "" +msgid "No feature" +msgstr "" + msgid "Vertex" -msgstr "Vertex" +msgstr "" msgid "Edge" -msgstr "Edge" +msgstr "" msgid "Plane" -msgstr "Plane" +msgstr "" msgid "Point on edge" -msgstr "Point on edge" +msgstr "" msgid "Point on circle" -msgstr "Point on circle" +msgstr "" msgid "Point on plane" -msgstr "Point on plane" +msgstr "" msgid "Center of edge" -msgstr "Center of edge" +msgstr "" msgid "Center of circle" -msgstr "Center of circle" - -msgid "ShiftLeft mouse button" msgstr "" msgid "Select feature" -msgstr "Select feature" +msgstr "" msgid "Select point" -msgstr "Select point" +msgstr "" msgid "Delete" msgstr "Radera" msgid "Restart selection" -msgstr "Restart selection" +msgstr "" msgid "Esc" msgstr "Esc" -msgid "Unselect" +msgid "Cancel a feature until exit" msgstr "" msgid "Measure" msgstr "Measure" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" + msgid "Edit to scale" -msgstr "Edit to scale" +msgstr "" msgctxt "Verb" -msgid "Scale" -msgstr "Skala" +msgid "Scale all" +msgstr "" msgid "None" msgstr "Ingen" @@ -1300,25 +1450,79 @@ msgid "Length" msgstr "Längd" msgid "Selection" -msgstr "Selection" +msgstr "" + +msgid " (Moving)" +msgstr "" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" + +msgid "Face" +msgstr "Face" + +msgid " (Fixed)" +msgstr " (Fixed)" + +msgid "Point" +msgstr "Point" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" + +msgid "Warning: please select Plane's feature." +msgstr "" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "" + +msgid "Warning: please select two different meshes." +msgstr "" msgid "Copy to clipboard" msgstr "Kopiera till urklipp" msgid "Perpendicular distance" -msgstr "Perpendicular distance" +msgstr "" msgid "Distance" -msgstr "Distance" +msgstr "" msgid "Direct distance" -msgstr "Direct distance" +msgstr "" msgid "Distance XYZ" -msgstr "Distance XYZ" +msgstr "" -msgid "Ctrl+" -msgstr "Ctrl +" +msgid "Parallel" +msgstr "" + +msgid "Center coincidence" +msgstr "" + +msgid "Feature 1" +msgstr "Feature 1" + +msgid "Reverse rotation" +msgstr "" + +msgid "Rotate around center:" +msgstr "" + +msgid "Parallel distance:" +msgstr "" + +msgid "Flip by Face 2" +msgstr "" msgid "Notice" msgstr "Iakttag" @@ -1354,8 +1558,11 @@ msgid "" msgstr "" "Konfigurations fil “%1%” har laddats, men vissa värden känns inte igen." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" @@ -1399,6 +1606,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1442,26 +1653,26 @@ msgstr "Laddar nuvarande inställningar" msgid "Loading a mode view" msgstr "Laddar modell vy" -msgid "Choose one file (3mf):" -msgstr "Välj en fil (3mf):" +msgid "Choose one file (3MF):" +msgstr "Välj en fil (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Välj en eller flera filer (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Välj en eller flera filer (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Välj en eller flera filer (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Välj en eller flera filer (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "" -msgid "Choose one file (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" msgstr "" msgid "Some presets are modified." msgstr "Några inställningar har ändrats." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Fortsätt med redigerings inställningarna till nytt projekt, avfärda dem " @@ -1479,7 +1690,7 @@ msgstr "Öppna Projekt" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Versionen av Snapmaker Orca är för låg och behöver uppdateras till den senaste " "versionen innan den kan användas normalt" @@ -1548,7 +1759,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Snapmaker Orca GUI-initiering misslyckades" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Allvarligt fel, undantag hittat: %1%" msgid "Quality" @@ -1578,12 +1789,18 @@ msgstr "Massiva Top Lager" msgid "Top Minimum Shell Thickness" msgstr "Minsta Top Skal Tjocklek" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "Massiva Botten Lager" msgid "Bottom Minimum Shell Thickness" msgstr "Minsta Botten Skal Tjocklek" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Strykning" @@ -1650,6 +1867,9 @@ msgstr "Del" msgid "Delete the selected object" msgstr "Radera det valda objektet" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Ladda..." @@ -1657,7 +1877,7 @@ msgid "Cube" msgstr "Kub" msgid "Cylinder" -msgstr "Cylinder" +msgstr "" msgid "Cone" msgstr "Kon" @@ -1671,6 +1891,9 @@ msgstr "Torus" msgid "Orca Cube" msgstr "" +msgid "Orca Tolerance Test" +msgstr "" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1688,7 +1911,7 @@ msgstr "" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1743,6 +1966,12 @@ msgstr "Ersätt med STL" msgid "Replace the selected part with new STL" msgstr "Ersätt den valda delen med ny STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Byta filament" @@ -1780,16 +2009,16 @@ msgstr "Rensa in i objektets support" msgid "Edit in Parameter Table" msgstr "Redigera i Parameter Tabell" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Konvertera ifrån inch" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Återställ till inch" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Konvertera ifrån meter" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Återställ till meter" msgid "Assemble" @@ -1876,9 +2105,18 @@ msgstr "Dela det valda objektet" msgid "Auto orientation" msgstr "Auto placera" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Auto placera objektet för att förbättra utskriftskvaliteten." +msgid "Edit" +msgstr "Redigera" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Välj Alla" @@ -1915,6 +2153,30 @@ msgstr "Radera platta" msgid "Remove the selected plate" msgstr "Radera den valda plattan" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Klona" @@ -1922,11 +2184,20 @@ msgid "Simplify Model" msgstr "Förenkla modellen" msgid "Center" -msgstr "Center" +msgstr "" + +msgid "Drop" +msgstr "" msgid "Edit Process Settings" msgstr "Redigera Process Inställningar" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Redigera utskriftsinställningar för ett enda objekt" @@ -1972,8 +2243,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d inte mångfaldig kant@%1$d inte mångfaldiga kanter" msgstr[1] "%1$d inte mångfaldig kant@%1$d inte mångfaldiga kanter" -msgid "Right click the icon to fix model object" -msgstr "Höger klicka på ikonen för att reparera modell objektet" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "Höger klicka på ikonen för att släppa objekts inställningarna" @@ -2021,6 +2292,9 @@ msgstr "" "Växla till inställningsläge för varje objekt för att redigera process " "inställningar för valda objekt." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Ta bort kopplingen från objekt som är en del av snittet" @@ -2039,10 +2313,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Denna åtgärd kommer att bryta en skuren korrespondens.\n" "Därefter kan inte modell konsistens garanteras .\n" @@ -2056,8 +2330,8 @@ msgstr "Ta bort alla kopplingar" msgid "Deleting the last solid part is not allowed." msgstr "Ej tillåtet att radera den senaste fasta delen." -msgid "The target object contains only one part and can not be splited." -msgstr "Det valda objektet innehåller endast en del och kan inte delas." +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" msgstr "Montering" @@ -2099,14 +2373,14 @@ msgid "Selection conflicts" msgstr "Urvalskonflikt" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Om den första valda delen är ett objekt, så bör även den andra vara ett " "objekt." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Om den första valda delen är en del, så bör den andra delen tillhöra samma " "objekt." @@ -2176,7 +2450,7 @@ msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" "En cell kan endast kopieras till en eller flertalet celler i samma kolumn" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "Kopiering av flertalet celler stöds ej" msgid "Outside" @@ -2197,6 +2471,9 @@ msgstr "Auto Brim" msgid "Mouse ear" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Endast yttre brim" @@ -2347,53 +2624,133 @@ msgstr "Kontrollera nätverksanslutningen för skrivaren och Studio." msgid "Connecting..." msgstr "Sammankopplar..." -msgid "?" -msgstr " ?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Tom" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Auto Refill" - -msgid "AMS not connected" -msgstr "AMS ej ansluten" +msgid "Auto-refill" +msgstr "" msgid "Load" -msgstr "Load" +msgstr "" msgid "Unload" msgstr "Mata ut" -msgid "Ext Spool" -msgstr "Ext Spole" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "" +"Välj ett AMS fack och tryck sedan på knappen \"Ladda\" eller \"Mata ut\" för " +"att automatiskt ladda eller mata ut filament." -msgid "Tips" -msgstr "Tips" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Guide" -msgstr "Guide" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" -msgid "Retry" -msgstr "Försök igen" +msgid "Change Anyway" +msgstr "" -msgid "Calibrating AMS..." -msgstr "Kalibrerar AMS..." +msgid "Off" +msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "Ett problem uppstod vid kalibrering. Tryck för att se åtgärd." +msgid "Filter" +msgstr "" -msgid "Calibrate again" -msgstr "Kalibrera igen" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" -msgid "Cancel calibration" -msgstr "Avbryt kalibrering" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Kylning" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Topplager" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Aux" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "Tomgång..." @@ -2410,44 +2767,37 @@ msgstr "Reversera nuvarande filament" msgid "Push new filament into extruder" msgstr "Mata in nytt filament i extrudern" +msgid "Grab new filament" +msgstr "Ta ett nytt filament" + msgid "Purge old filament" msgstr "Rensa gammalt filament" -msgid "Feed Filament" -msgstr "Mata filament" - msgid "Confirm extruded" msgstr "Bekräfta extruderad" msgid "Check filament location" msgstr "Kontrollera filamentets placering" -msgid "Grab new filament" -msgstr "Ta ett nytt filament" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Välj ett AMS fack och tryck sedan på knappen \"Ladda\" eller \"Mata ut\" för " -"att automatiskt ladda eller mata ut filament." -msgid "Edit" -msgstr "Redigera" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Alla valda objekt är på den låsta plattan,\n" "det går inte att auto-placera dessa objekten." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Inga placerbara objekt är valda." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Denna plattan är låst,\n" "det går inte att auto-placera på denna plattan." @@ -2486,15 +2836,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Alla valda objekt är på den låsta plattan,\n" "det går inte att auto-placera dessa objekten." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Denna plattan är låst,\n" "det går inte att auto-placera på denna plattan." @@ -2548,7 +2898,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Anslutningen till molntjänsten misslyckades. Försök igen." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Det gick inte att hitta utskrifts filen; bered den igen" msgid "" @@ -2577,7 +2927,7 @@ msgstr "" "Storleken på utskrifts filen är för stor. Vänligen justera filstorleken och " "försök igen." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Utskrifts filen hittades inte; bered den igen och skicka till utskrift." @@ -2615,21 +2965,58 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Skickat. Hoppar automatiskt till nästa sida in%s s" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Ett Micro SD-kort måste sättas i innan utskrift via LAN." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "Skickar G-kod fil över LAN" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Skickar G-kod fil till MicroSD-kort" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Framgångsrikt skickat. Stäng den aktuella sidan i %s s" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Ett Micro SD-kort måste sättas i innan det skickas till skrivaren." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Importera SLA arkiv" @@ -2670,10 +3057,10 @@ msgstr "Laddar ner" msgid "Download failed" msgstr "Nedladdningen misslyckades" -msgid "Cancelled" +msgid "Canceled" msgstr "Avbruten" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Installationen lyckades" msgid "Installing" @@ -2695,9 +3082,9 @@ msgid "Snapmaker Orca is licensed under " msgstr "Snapmaker Orca är licensierad under " msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, version 3" +msgstr "" -msgid "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" msgstr "" msgid "Libraries" @@ -2714,9 +3101,6 @@ msgstr "" msgid "About %s" msgstr "Om %s" -msgid "Snapmaker Orca " -msgstr "" - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "" @@ -2746,9 +3130,6 @@ msgstr "Acceptera" msgid "Close" msgstr "Stäng" -msgid "Colour" -msgstr "Färg" - msgid "" "Nozzle\n" "Temperature" @@ -2769,9 +3150,6 @@ msgstr "Inmatningsvärdet ska vara större än %1% och mindre än %2%" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "Inställning av AMS-facks information under utskrift stöds inte" - msgid "Factors of Flow Dynamics Calibration" msgstr "Faktorer för kalibrering av flödesdynamik" @@ -2784,6 +3162,9 @@ msgstr "Faktor K" msgid "Factor N" msgstr "Faktor N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Inställning av AMS-facks information under utskrift stöds inte" + msgid "Setting Virtual slot information while printing is not supported" msgstr "Inställning av information om virtuell plats under utskrift stöds inte" @@ -2801,6 +3182,15 @@ msgstr "" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Annan färg" @@ -2834,15 +3224,9 @@ msgstr "Byggplattans temperatur" msgid "Max volumetric speed" msgstr "Max volymetrisk hastighet" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "Byggplattans temperatur" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Starta" @@ -2884,14 +3268,79 @@ msgstr "Dynamisk flödeskalibrering" msgid "Step" msgstr "Steg" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS Fack" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Nozzel" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Observera: Endast de AMS-fack som är laddade med samma materialtyp kan " -"väljas." msgid "Enable AMS" msgstr "Aktivera AMS" @@ -2905,22 +3354,15 @@ msgstr "Inaktivera AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "Skriv ut med filament på en extern spole" -msgid "Current Cabin humidity" -msgstr "Current Cabin humidity" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"Please change the desiccant when it is too wet. The indicator may not " "represent accurately in following cases: when the lid is open or the " -"desiccant pack is changed. It takes a few hours to absorb the moisture, and " -"low temperatures also slow down the process." +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Konfigurera vilket AMS-fack som ska användas för filamentet som används i " "utskriftsjobbet." @@ -2940,12 +3382,21 @@ msgstr "Aktivera inte AMS" msgid "Print using materials mounted on the back of the case" msgstr "Skriv ut med filament på en extern spole." -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Skriv ut med filament i AMS" msgid "Print with filaments mounted on the back of the chassis" msgstr "Skriv ut med filament på en extern spole" +msgid "Auto Refill" +msgstr "" + +msgid "Left" +msgstr "Vänster" + +msgid "Right" +msgstr "Höger" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -2953,27 +3404,29 @@ msgstr "" "När det aktuella materialet tar slut, fortsätter printern att skriva ut " "material i följande ordning." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Grupp" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Printern stöder för närvarande inte automatisk påfyllning." msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" -"AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -2995,7 +3448,7 @@ msgstr "" "Lab-filament. Det tar ungefär 20 sekunder." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Obs: Om ett nytt filament sätts in under utskriften kommer AMS inte att " @@ -3013,8 +3466,8 @@ msgstr "Slå på uppdatering" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS läser automatiskt informationen om insatt Bambu Lab filament vid " "uppstart. Det tar cirka 1 minut. Läsprocessen kommer att rulla " @@ -3032,33 +3485,27 @@ msgid "Update remaining capacity" msgstr "Uppdatera den återstående kapaciteten" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS kommer att uppskatta Bambu filamentets återstående kapacitet när " -"filament informationen har uppdaterats. Under utskrift uppdateras den " -"återstående kapaciteten automatiskt." msgid "AMS filament backup" -msgstr "AMS filament backup" +msgstr "" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS fortsätter automatiskt till en annan spole med samma filament egenskaper " "när det aktuella filamentet tar slut." msgid "Air Printing Detection" -msgstr "Air Printing Detection" +msgstr "" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." msgstr "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." msgid "File" msgstr "Fil" @@ -3101,10 +3548,14 @@ msgid "" "program" msgstr "Ett fel uppstod. För lite system minne eller en bugg i programmet" -msgid "Please save project and restart the program. " -msgstr "Spara projekt och starta om programmet. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Spara projekt och starta om programmet." + +msgid "Processing G-code from Previous file..." msgstr "Processera G-Code från Föregående fil…" msgid "Slicing complete" @@ -3135,9 +3586,9 @@ msgid "Running post-processing scripts" msgstr "Kör efterbearbetnings skript" msgid "Successfully executed post-processing script" -msgstr "Successfully executed post-processing script" +msgstr "" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "" #, boost-format @@ -3176,12 +3627,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Okänt fel vid exportering av G-code." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3198,225 +3649,6 @@ msgstr "" "Planerar uppladdning till `%1%`. Se fönster -> Kö för uppladdning av " "utskriftsvärd" -msgid "Device" -msgstr "Enhet" - -msgid "Task Sending" -msgstr "Task Sending" - -msgid "Task Sent" -msgstr "Task Sent" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "Offline" - -msgid "No task" -msgstr "No task" - -msgid "View" -msgstr "Vy" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "Device Name" - -msgid "Task Name" -msgstr "Task Name" - -msgid "Device Status" -msgstr "Device Status" - -msgid "Actions" -msgstr "Actions" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "Lägg till" - -msgid "Idle" -msgstr "Inaktiv" - -msgid "Printing" -msgstr "Utskrift pågår" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "Inkompatibel" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "Förbered" - -msgid "Slicing" -msgstr "Bereder" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "Skickar" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "Återuppta" - -msgid "Stop" -msgstr "Stopp" - -msgid "Task Status" -msgstr "Task Status" - -msgid "Sent Time" -msgstr "Sent Time" - -msgid "There are no tasks to be sent!" -msgstr "There are no tasks to be sent!" - -msgid "No historical tasks!" -msgstr "No historical tasks!" - -msgid "Loading..." -msgstr "Laddar..." - -msgid "No AMS" -msgstr "No AMS" - -msgid "Send to Multi-device" -msgstr "Send to Multi-device" - -msgid "Preparing print job" -msgstr "Förbereder utskriftsjobb" - -msgid "Abnormal print file data. Please slice again" -msgstr "Onormal utskrifts fil data. Vänligen bered igen" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "Use External Spool" - -msgid "Use AMS" -msgstr "Use AMS" - -msgid "Select Printers" -msgstr "Select Printers" - -msgid "Ams Status" -msgstr "AMS Status" - -msgid "Printing Options" -msgstr "Printing Options" - -msgid "Bed Leveling" -msgstr "Justering av Byggplattan" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "Send Options" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"printers at the same time. (It depends on how many devices can undergo " -"heating at the same time.)" - -msgid "Wait" -msgstr "Wait" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"minute each batch. (It depends on how long it takes to complete heating.)" - -msgid "Send" -msgstr "Skicka" - -msgid "Name is invalid;" -msgstr "Namnet är ogiltligt;" - -msgid "illegal characters:" -msgstr "Ogiltliga tecken:" - -msgid "illegal suffix:" -msgstr "Ogiltlig ändelse:" - -msgid "The name is not allowed to be empty." -msgstr "Namn fältet får inte vara tomt." - -msgid "The name is not allowed to start with space character." -msgstr "Namnet får inte börja med mellanrum." - -msgid "The name is not allowed to end with space character." -msgstr "Namnet får inte avslutas med mellanrum." - -msgid "The name length exceeds the limit." -msgstr "Namnlängden överskrider gränsen." - msgid "Origin" msgstr "Ursprung" @@ -3487,19 +3719,18 @@ msgstr "Välj en STL fil att importera byggplattans model från:" msgid "Bed Shape" msgstr "Byggplattans Form" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Den rekommenderade lägsta temperaturen är lägre än 190 grader eller den " -"rekommenderade max temperaturen är högre än 300 grader.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" msgstr "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" msgid "Please check.\n" msgstr "Kontrollera.\n" @@ -3515,39 +3746,36 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Rekommenderad nozzel temperatur med denna filament typ är [%d, %d] grader " "celius" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "För liten max volymhastighet.\n" "Värdet återställdes till 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"Current chamber temperature is higher than the material's safe temperature; " -"this may result in material softening and nozzle clogs.The maximum safe " -"temperature for the material is %d" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "För liten lagerhöjd.\n" "Den har återställts till 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "För litet avstånd för strykning.\n" "Återställ till 0.1" @@ -3591,14 +3819,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" msgid "" @@ -3636,45 +3864,58 @@ msgstr "" "JA - Behåll Prime Torn\n" "NEJ - Behåll Oberoende Lagerhöjd på support" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Vid utskrift av objekt kan extrudern kollidera med en skirt.\n" -"Återställ därför skirt lagret till 1 för att undvika kollisioner." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiralläget fungerar endast när vägg varv är 1, support är inaktiverat, top " -"skalets lager är 0, gles ifyllnad är 0 och timelapse typen är traditionell." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Maskiner med I3-struktur kan dock inte generera timelapse videor." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Ändra dessa inställningar automatiskt? \n" +"Ändra dessa inställningar automatiskt?\n" "JA -Ändra dessa inställningar och möjliggör Spiral läge automatiskt\n" "NEJ -Avbryt Spiral läge denna gång" +msgid "Printing" +msgstr "Utskrift pågår" + msgid "Auto bed leveling" msgstr "Auto justera byggplattan" msgid "Heatbed preheating" msgstr "Byggplattan förvärms" -msgid "Sweeping XY mech mode" -msgstr "Sveper XY mech-läge" +msgid "Vibration compensation" +msgstr "Vibrations kompensation" msgid "Changing filament" msgstr "Byter filament" @@ -3682,14 +3923,14 @@ msgstr "Byter filament" msgid "M400 pause" msgstr "M400 paus" -msgid "Paused due to filament runout" -msgstr "Pausad på grund av filament slut" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Värmer hotend" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Kalibrerar extrudering" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Skannar byggplattan" @@ -3712,78 +3953,138 @@ msgstr "Rengör nozzle spetsen" msgid "Checking extruder temperature" msgstr "Kontrollerar extruderings temperatur" -msgid "Printing was paused by the user" -msgstr "Utskriften pausades av användaren" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Paus av front luckan faller" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Kalibrerar Micro Lidar" -msgid "Calibrating extrusion flow" -msgstr "Kalibrerar extruderings flödet" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Pausad på grund av fel i nozzle temperaturen" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Pausad på grund av fel i byggplattans temperatur" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Utmatar filament" -msgid "Skip step pause" -msgstr "Hoppa över steg paus" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Laddning av filament" -msgid "Motor noise calibration" -msgstr "Kalibrering av motorljud" +msgid "Motor noise cancellation" +msgstr "Brusreducering av motorer" -msgid "Paused due to AMS lost" -msgstr "Pausad på grund av att AMS förlorats" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Pausad på grund av låg hastighet på heat break fläkten" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Pausad på grund av fel i styrningen av kammar temperaturen" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Kyler kammare" -msgid "Paused by the Gcode inserted by user" -msgstr "Pausad av G-koden som infogats av användaren" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Uppvisning av motorljud" -msgid "Nozzle filament covered detected pause" -msgstr "Filament på nozzel upptäckt paus" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Fel på skärare paus" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Fel på första lagret paus" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Stopp i nozzel paus" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Okänd" -msgid "Fatal" -msgstr "Allvarligt" - -msgid "Serious" -msgstr "Allvarlig" - -msgid "Common" -msgstr "Vanlig" - msgid "Update successful." msgstr "Uppdateringen lyckades." @@ -3796,35 +4097,55 @@ msgstr "Verifikation misslyckade." msgid "Update failed." msgstr "Uppdatering misslyckades." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/" -"TPU) is not allowed to be loaded." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." msgstr "" -"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order " -"to avoid extruder clogging, it is not allowed to set the chamber temperature " -"above 45℃." msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" + +msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " "control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." +msgstr "" -msgid "Failed to start printing job" -msgstr "Det gick inte att starta utskriftsjobbet" +msgid "Failed to start print job" +msgstr "" msgid "" "This calibration does not support the currently selected nozzle diameter" @@ -3837,31 +4158,77 @@ msgstr "Aktuell flödeshastighets kalibrerings parameter är ogiltig" msgid "Selected diameter and machine diameter do not match" msgstr "Vald diameter och maskinens diameter stämmer inte överens" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Misslyckades med att generera cali G kod" msgid "Calibration error" msgstr "Fel vid kalibrering" -msgid "TPU is not supported by AMS." -msgstr "TPU stöds inte av AMS." - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF stöds inte av AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume Printing" msgstr "" -"Fuktig PVA blir flexibel och fastnar i AMS, var noga med att torka den väl " -"före användning." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "" + +msgid "Check Assistant" +msgstr "" + +msgid "Filament Extruded, Continue" +msgstr "" + +msgid "Not Extruded Yet, Retry" +msgstr "" + +msgid "Finished, Continue" +msgstr "" + +msgid "Load Filament" +msgstr "Ladda Filament" + +msgid "Filament Loaded, Resume" +msgstr "" + +msgid "View Liveview" +msgstr "" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Klar" + +msgid "Retry" +msgstr "Försök igen" + +msgid "Resume" +msgstr "Återuppta" + +msgid "Unknown error." msgstr "" -"CF/GF-trådar är hårda och spröda, så de kan lätt gå sönder eller fastna i en " -"AMS; använd dem med försiktighet." msgid "default" msgstr "standard" @@ -3873,7 +4240,7 @@ msgstr "" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "" msgid "Add selected placeholder to G-code" @@ -3932,7 +4299,7 @@ msgid "parameter name" msgstr "Parameter namn" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s kan inte vara procent" #, c-format, boost-format @@ -3944,7 +4311,7 @@ msgstr "Parameter validering" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "Value %s is out of range. The valid range is from %d to %d." +msgstr "" msgid "Value is out of range." msgstr "Värdet är utanför intervallet." @@ -3971,10 +4338,27 @@ msgstr "" msgid "Some extension in the input is invalid" msgstr "" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Ogiltligt format. Förväntat vector format: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Lagerhöjd" @@ -3984,9 +4368,6 @@ msgstr "Linjebredd" msgid "Fan Speed" msgstr "Fläkt Hastighet" -msgid "Temperature" -msgstr "Temperatur" - msgid "Flow" msgstr "Flöde" @@ -4020,7 +4401,7 @@ msgstr "Fläkthastighet: " msgid "Temperature: " msgstr "Temperatur: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Laddar G-koder" msgid "Generating geometry vertex data" @@ -4039,7 +4420,7 @@ msgid "Flushed" msgstr "Rensad" msgid "Tower" -msgstr "Tower" +msgstr "Torn" msgid "Total" msgstr "Totalt" @@ -4051,7 +4432,73 @@ msgid "Total time" msgstr "Total tid" msgid "Total cost" -msgstr "Total cost" +msgstr "" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Tips:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Tips" msgid "up to" msgstr "upp till" @@ -4062,17 +4509,11 @@ msgstr "över" msgid "from" msgstr "från" -msgid "Color Scheme" -msgstr "Färgschema" - msgid "Time" msgstr "Tid" -msgid "Percent" -msgstr "Procent" - -msgid "Used filament" -msgstr "Använt filament" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" msgstr "Lagerhöjd (mm)" @@ -4119,12 +4560,12 @@ msgstr "flytta" msgid "Extruder" msgstr "Extruder" -msgid "Filament change times" -msgstr "Filament bytes tider" - msgid "Cost" msgstr "Kostnad" +msgid "Filament change times" +msgstr "Filament bytes tider" + msgid "Color change" msgstr "Färg byte" @@ -4134,10 +4575,7 @@ msgstr "Skriv ut" msgid "Printer" msgstr "Skrivare" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -4147,10 +4585,10 @@ msgid "Normal mode" msgstr "Normalt läge" msgid "Total Filament" -msgstr "Total Filament" +msgstr "" msgid "Model Filament" -msgstr "Model Filament" +msgstr "" msgid "Prepare time" msgstr "Förbered tid" @@ -4164,6 +4602,19 @@ msgstr "Ändra till tyst läge" msgid "Switch to normal mode" msgstr "Ändra till normal läge" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Variabel lagerhöjd" @@ -4182,27 +4633,15 @@ msgstr "Radie" msgid "Keep min" msgstr "Håll minimal" -msgid "Left mouse button:" -msgstr "Vänster musknapp:" - msgid "Add detail" msgstr "Lägg till detalj" -msgid "Right mouse button:" -msgstr "Höger musknapp:" - msgid "Remove detail" msgstr "Ta bort detalj" -msgid "Shift + Left mouse button:" -msgstr "Shift + Vänster musknapp" - msgid "Reset to base" msgstr "Återställ till basen" -msgid "Shift + Right mouse button:" -msgstr "Shift+Höger musknapp:" - msgid "Smoothing" msgstr "Utjämning" @@ -4215,6 +4654,55 @@ msgstr "Öka/minska redigeringsområdet" msgid "Sequence" msgstr "Sekvens" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Spegelvänd Objektet" @@ -4246,7 +4734,7 @@ msgid "Spacing" msgstr "Mellanrum" msgid "0 means auto spacing." -msgstr "0 means auto spacing." +msgstr "" msgid "Auto rotate for arrangement" msgstr "Auto rotera för arrangemang" @@ -4260,11 +4748,25 @@ msgstr "Undvik kalibrerings området" msgid "Align to Y axis" msgstr "Justera mot Y-axeln" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Lägg till" + msgid "Add plate" msgstr "Lägg till byggplata" -msgid "Auto orient" -msgstr "Auto placera" +msgid "Auto orient all/selected objects" +msgstr "Autoorientering alla/valda objekt" + +msgid "Auto orient all objects on current plate" +msgstr "Autoorientering alla objekt på plattan" msgid "Arrange all objects" msgstr "Ordna alla objekt" @@ -4284,11 +4786,29 @@ msgstr "Monterings vy" msgid "Select Plate" msgstr "Välj Byggplatta" +msgid "Slicing" +msgstr "Bereder" + +msgid "Slice all" +msgstr "Bered allt" + +msgid "Failed" +msgstr "Misslyckades" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "Monterings retur" -msgid "return" -msgstr "tillbaka" +msgid "Return" +msgstr "Tillbaka" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Färgläggningsverktyg" @@ -4302,6 +4822,9 @@ msgstr "Sektionsvy" msgid "Assemble Control" msgstr "Monterings Kontroll" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Total Volym:" @@ -4316,30 +4839,69 @@ msgstr "Storlek:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Ett objekt är placerad över byggplattans begränsningar." msgid "A G-code path goes beyond the max print height." msgstr "En G-kod bana går utöver den maximala utskriftshöjden." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "En G-kod väg passerar över byggplattans begränsningar." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Bara objektet som editeras är synligt." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Ett objekt ligger över plattans gränser eller överskrider höjdgränsen.\n" -"Lös problemet genom att flytta det helt på eller av plattan, och bekräfta " -"att höjden ligger inom byggvolymen." msgid "Calibration step selection" msgstr "Val av kalibreringssteg" @@ -4350,11 +4912,8 @@ msgstr "Micro Lidar Kalibrering" msgid "Bed leveling" msgstr "Justering av Byggplattan" -msgid "Vibration compensation" -msgstr "Vibrations kompensation" - -msgid "Motor noise cancellation" -msgstr "Brusreducering av motorer" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Kalibrerings program" @@ -4365,7 +4924,7 @@ msgid "" "It keeps the device performing optimally." msgstr "" "Kalibreringsprogrammet avläser status på enheten för att automatiskt " -"minimera avvikelser. \n" +"minimera avvikelser.\n" "Detta gör att enheten kan fungera optimalt." msgid "Calibration Flow" @@ -4407,24 +4966,21 @@ msgstr "" msgid "Show \"Live Video\" guide page." msgstr "Visa sidan \"Live Video\"." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Anslut skrivare (LAN)" msgid "Please input the printer access code:" msgstr "Ange skrivarens åtkomstkod:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Du hittar den i ”Inställningar> Nätverk> Anslutningskod”\n" -"på skrivaren, som visas i figuren:" msgid "Invalid input." msgstr "Ogiltig inmatning" @@ -4444,9 +5000,15 @@ msgstr "Stänger Begäran medans vissa inställningar ändrats." msgid "Logging" msgstr "Loggar" +msgid "Prepare" +msgstr "Förbered" + msgid "Preview" msgstr "Förhandsvisning" +msgid "Device" +msgstr "Enhet" + msgid "Multi-device" msgstr "Multi-device" @@ -4468,12 +5030,12 @@ msgstr "Bered plattan" msgid "Print plate" msgstr "Skriv ut byggplattan" -msgid "Slice all" -msgstr "Bered allt" - msgid "Export G-code file" msgstr "Exportera G-kod filen" +msgid "Send" +msgstr "Skicka" + msgid "Export plate sliced file" msgstr "Exportera byggplattans beredda fil" @@ -4486,6 +5048,9 @@ msgstr "Skriv ut allt" msgid "Send all" msgstr "Skicka alla" +msgid "Send to Multi-device" +msgstr "" + msgid "Keyboard Shortcuts" msgstr "Kortkommando" @@ -4520,10 +5085,6 @@ msgstr "Ladda ner modeller" msgid "Default View" msgstr "Standard Vy" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Topplager" - msgid "Top View" msgstr "Vy Top" @@ -4546,15 +5107,9 @@ msgstr "Bakom" msgid "Rear View" msgstr "Vy Bakifrån" -msgid "Left" -msgstr "Vänster" - msgid "Left View" msgstr "Vy Vänster" -msgid "Right" -msgstr "Höger" - msgid "Right View" msgstr "Vy Höger" @@ -4570,8 +5125,8 @@ msgstr "Skapa nytt projekt" msgid "Open a project file" msgstr "Öppna en projekt fil" -msgid "Recent projects" -msgstr "Senaste projekten" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "Spara Projekt" @@ -4582,9 +5137,6 @@ msgstr "Spara nuvarande projekt till fil" msgid "Save Project as" msgstr "Spara Projekt som" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Spara nuvarande projekt som" @@ -4618,8 +5170,8 @@ msgstr "Exportera alla objekt som STL" msgid "Export Generic 3MF" msgstr "Exportera generisk 3mf" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Exportera 3mf fil utan några 3mf-tillägg" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Exportera 3MF fil utan några 3mf-tillägg" msgid "Export current sliced file" msgstr "Exportera aktuell beredd fil" @@ -4633,6 +5185,9 @@ msgstr "Exportera G-kod" msgid "Export current plate as G-code" msgstr "Exportera aktuell byggplatta som G-kod" +msgid "Export toolpaths as OBJ" +msgstr "Exportera toolpaths som OBJ" + msgid "Export Preset Bundle" msgstr "" @@ -4684,6 +5239,12 @@ msgstr "Kopia vald" msgid "Clone copies of selections" msgstr "Kopiera markeringen" +msgid "Duplicate Current Plate" +msgstr "" + +msgid "Duplicate the current plate" +msgstr "" + msgid "Select all" msgstr "Välj allt" @@ -4702,16 +5263,24 @@ msgstr "Använd Perspektiv Vy" msgid "Use Orthogonal View" msgstr "Använd Ortogonal Vy" +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "" msgid "Show 3D Navigator" msgstr "" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "" msgid "Reset Window Layout" @@ -4723,18 +5292,27 @@ msgstr "" msgid "Show &Labels" msgstr "Visa & Etiketter" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Visa objekt etiketter i 3D-scenen" msgid "Show &Overhang" msgstr "Visa & Överhäng" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "Visa objektets överhäng i 3D-scen" +msgid "Show Selected Outline (beta)" +msgstr "" + +msgid "Show outline around selected object in 3D scene." +msgstr "" + msgid "Preferences" msgstr "Inställningar" +msgid "View" +msgstr "Vy" + msgid "Help" msgstr "Hjälp" @@ -4753,36 +5331,54 @@ msgstr "Pass 2" msgid "Flow rate test - Pass 2" msgstr "Test av flödeshastighet - Godkänt 2" +msgid "YOLO (Recommended)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "" + +msgid "YOLO (perfectionist version)" +msgstr "" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "" + msgid "Flow rate" msgstr "Flödeshastighet" msgid "Pressure advance" -msgstr "Pressure advance" +msgstr "" msgid "Retraction test" -msgstr "Retraction test" - -msgid "Orca Tolerance Test" -msgstr "Orca Tolerance Test" +msgstr "" msgid "Max flowrate" msgstr "Max flödes hastighet" +msgid "Cornering" +msgstr "" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Mer..." - msgid "Tutorial" msgstr "Guide" msgid "Calibration help" msgstr "Hjälp med kalibrering" -msgid "More calibrations" -msgstr "Fler kalibreringar" - msgid "&Open G-code" msgstr "&Öppna G-kod" @@ -4798,9 +5394,6 @@ msgstr "Ladda om plattan från disken" msgid "Export &Toolpaths as OBJ" msgstr "Exportera &Toolpaths som OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Exportera toolpaths som OBJ" - msgid "Open &Slicer" msgstr "Öppna &Studio" @@ -4823,17 +5416,20 @@ msgstr "&Visa" msgid "&Help" msgstr "&Hjälp" -#, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." +#, fuzzy, c-format, boost-format +msgid "A file exists with the same name: %s, do you want to overwrite it?" msgstr "Det finns en fil med samma namn: %s. Vill du åsidosätta den?" -#, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." +#, fuzzy, c-format, boost-format +msgid "A config exists with the same name: %s, do you want to overwrite it?" msgstr "Det finns en konfiguration med samma namn: %s. Vill du åsidosätta den?" msgid "Overwrite file" msgstr "Skriv över fil" +msgid "Overwrite config" +msgstr "" + msgid "Yes to All" msgstr "Ja till allt" @@ -4850,7 +5446,7 @@ msgstr[0] "" msgstr[1] "" msgid "Export result" -msgstr "Export resultat" +msgstr "Exportera resultat" msgid "Select profile to load:" msgstr "Välj den profil som ska laddas:" @@ -4881,13 +5477,13 @@ msgid "Filament Settings" msgstr "Filament Inställningar" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Vill du synkronisera dina personuppgifter från Bambu Cloud? \n" +"Vill du synkronisera dina personuppgifter från Bambu Cloud?\n" "Den innehåller följande information:\n" "1. Process inställningar\n" "2. Inställningar av filament\n" @@ -4919,14 +5515,13 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "Printerns kamera fungerar inte som den ska." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Ett problem har uppstått. Uppdatera printerns programvara och försök igen." msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." msgid "Please enter the IP of printer to connect." msgstr "Ange printerns IP för att ansluta." @@ -4938,7 +5533,7 @@ msgid "Connection Failed. Please check the network and try again" msgstr "Anslutningen misslyckades. Kontrollera nätverket och försök igen" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Kontrollera nätverket och försök igen. Du kan starta om eller uppdatera " @@ -4947,8 +5542,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "Printern har loggats ut och kan inte anslutas." -msgid "Stopped." -msgstr "Avbruten." +msgid "Video Stopped." +msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN-anslutning misslyckades (Det gick inte att starta liveview)" @@ -4985,6 +5580,9 @@ msgstr "information" msgid "Playing..." msgstr "Spelar..." +msgid "Loading..." +msgstr "Laddar..." + msgid "Year" msgstr "År" @@ -5003,6 +5601,9 @@ msgstr "Gruppera filer efter månad, senaste först." msgid "Show all files, recent first." msgstr "Visa alla filer, de senaste först." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Växla till timelapse filer." @@ -5012,8 +5613,9 @@ msgstr "Video" msgid "Switch to video files." msgstr "Växla till video filer." -msgid "Switch to 3mf model files." -msgstr "Byt till 3mf modell filer." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Byt till 3MF modell filer." msgid "Delete selected files from printer." msgstr "Ta bort valda filer från skrivaren." @@ -5034,15 +5636,11 @@ msgid "Refresh" msgstr "Uppdatera" msgid "Reload file list from printer." -msgstr "Reload file list from printer." +msgstr "" msgid "No printers." msgstr "Ingen printer." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Sammankoppling misslyckades [%d]" - msgid "Loading file list..." msgstr "Laddar fil lista..." @@ -5050,30 +5648,18 @@ msgid "No files" msgstr "Inga filer" msgid "Load failed" -msgstr "Load failed" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "Initieringen misslyckades (Enhets anslutningen är inte klar)!" +msgstr "" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN Connection Failed (Failed to view sdcard)" +msgstr "" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Browsing file in SD card is not supported in LAN Only Mode." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Initieringen misslyckades (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5092,7 +5678,7 @@ msgstr "Vill du radera filen '%s' från skrivaren?" msgid "Delete file" msgstr "Radera fil" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Hämtar information om modellen..." msgid "Failed to fetch model information from printer." @@ -5102,8 +5688,8 @@ msgid "Failed to parse model information." msgstr "Det gick inte att analysera modellinformation" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" #, c-format, boost-format @@ -5115,8 +5701,6 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" -"File: %s\n" -"Title: %s\n" msgid "Download waiting..." msgstr "Nedladdning väntar..." @@ -5134,12 +5718,16 @@ msgstr "Nedladdning slutförd" msgid "Downloading %d%%..." msgstr "Laddar ner %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." msgstr "Filen finns inte." @@ -5150,13 +5738,47 @@ msgstr "Fel på filens kontrollsumma. Vänligen försök igen." msgid "Not supported on the current printer version." msgstr "Stöds inte av den aktuella skrivarversionen." -msgid "Storage unavailable, insert SD card." -msgstr "Lagring saknas, sätt i SD-kort." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Felkod: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Hastighet:" @@ -5196,11 +5818,84 @@ msgstr "" msgid "Invert Roll axis" msgstr "" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Sök" + +msgid "My Device" +msgstr "Min Enhet" + +msgid "Other Device" +msgstr "Andra Enheter" + +msgid "Online" +msgstr "Online" + +msgid "Input access code" +msgstr "Inmatning av åtkomstkod" + +msgid "Can't find my devices?" +msgstr "Hittar du inte enheter?" + +msgid "Log out successful." +msgstr "Utloggning lyckades." + +msgid "Offline" +msgstr "Offline" + +msgid "Busy" +msgstr "Upptagen" + +msgid "Modifying the device name" +msgstr "Ändra enhetens namn" + +msgid "Name is invalid;" +msgstr "Namnet är ogiltligt;" + +msgid "illegal characters:" +msgstr "Ogiltliga tecken:" + +msgid "illegal suffix:" +msgstr "Ogiltlig ändelse:" + +msgid "The name is not allowed to be empty." +msgstr "Namn fältet får inte vara tomt." + +msgid "The name is not allowed to start with space character." +msgstr "Namnet får inte börja med mellanrum." + +msgid "The name is not allowed to end with space character." +msgstr "Namnet får inte avslutas med mellanrum." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Utskriftsförlopp" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Stopp" msgid "Layer: N/A" msgstr "Lager: N/A" @@ -5212,8 +5907,6 @@ msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" -"You have completed printing the mall model, \n" -"but synchronizing rating information has failed." msgid "How do you like this printing file?" msgstr "Vad tycker du om den här utskriftsfilen?" @@ -5231,8 +5924,8 @@ msgstr "Betygsätt" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "MicroSD-kort" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Kamerainställning" @@ -5244,40 +5937,46 @@ msgid "Control" msgstr "Kontroll" msgid "Printer Parts" -msgstr "Printer Parts" +msgstr "" msgid "Print Options" msgstr "Utskriftsalternativ" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Lampa" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Kammare" - msgid "Bed" msgstr "Byggplattan" msgid "Debug Info" msgstr "Felsöknings Information" -msgid "No SD Card" -msgstr "Inget MicroSD-kort" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "MicroSD-kortet är onormalt" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Avbryt utskrift" -msgid "Are you sure you want to cancel this print?" -msgstr "Är du säker på att du vill avbryta utskriften?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Skrivaren är upptagen med ett annat utskriftsjobb." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Laddar ner..." @@ -5298,19 +5997,16 @@ msgid "Layer: %d/%d" msgstr "Lager: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." +msgstr "Värm nozzeln till över 170°C innan du laddar eller matar ut filament." + +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." msgstr "" -"Värm nozzeln till över 170 grader innan du laddar eller matar ut filament." - -msgid "Still unload" -msgstr "Matar ut fortfarande" - -msgid "Still load" -msgstr "Laddar fortfarande" msgid "Please select an AMS slot before calibration" -msgstr "Välj ett AMS-fack innan kalibrering." +msgstr "Välj ett AMS-fack innan kalibrering" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " @@ -5334,8 +6030,19 @@ msgstr "Sport" msgid "Ludicrous" msgstr "Galet" -msgid "Can't start this without SD card." -msgstr "Kan inte starta utan MicroSD-kort." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Betygsätt utskriftsprofil" @@ -5358,14 +6065,11 @@ msgstr "Skicka in" msgid "Please click on the star first." msgstr "Klicka på stjärnan först." -msgid "InFo" -msgstr "Info" - msgid "Get oss config failed." msgstr "Hämta konfigurationen för oss misslyckades." -msgid "Upload Pictrues" -msgstr "Upload Pictures" +msgid "Upload Pictures" +msgstr "" msgid "Number of images successfully uploaded" msgstr "Antal bilder som laddats upp framgångsrikt" @@ -5379,8 +6083,8 @@ msgstr " uppladdning av konfiguration misslyckades\n" msgid " No corresponding storage bucket\n" msgstr " Ingen motsvarande lagrings plats\n" -msgid " can not be opened\n" -msgstr " cannot be opened\n" +msgid " cannot be opened\n" +msgstr "" msgid "" "The following issues occurred during the process of uploading images. Do you " @@ -5404,13 +6108,10 @@ msgid "obtaining instance_id failed\n" msgstr "det gick inte att få instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " +msgstr "" msgid "error message: " msgstr "felmeddelande: " @@ -5418,15 +6119,12 @@ msgstr "felmeddelande: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" "Would you like to redirect to the webpage to give a rating?" +msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Några av dina bilder kunde inte laddas upp. Vill du bli omdirigerad till " "webbsidan för betygsättning?" @@ -5436,7 +6134,7 @@ msgstr "Du kan välja upp till 16 bilder." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." @@ -5444,12 +6142,22 @@ msgstr "" msgid "Status" msgstr "Status" +msgctxt "Firmware" msgid "Update" -msgstr "Uppdatera" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Visa inte igen" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s fel" @@ -5477,11 +6185,12 @@ msgstr "%s information" msgid "Skip" msgstr "Hoppa över" -msgid "Newer 3mf version" -msgstr "Nyare 3mf version" +#, fuzzy +msgid "Newer 3MF version" +msgstr "Nyare 3MF version" msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" @@ -5491,10 +6200,10 @@ msgstr "" msgid "Download Beta Version" msgstr "Ladda ner betaversion" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" msgid "Current Version: " @@ -5503,8 +6212,31 @@ msgstr "Aktuell version: " msgid "Latest Version: " msgstr "Senaste versionen: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" -msgstr "Not for now" +msgstr "" + +msgid "Server Exception" +msgstr "" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" + +msgid "How to use LAN only mode" +msgstr "" + +msgid "Don't show this dialog again" +msgstr "" msgid "3D Mouse disconnected." msgstr "3D mus bortkopplad." @@ -5568,7 +6300,13 @@ msgstr[1] "%1$d Objektet har färgläggning.@%1$d Objekten har färgläggning." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "" +msgstr[1] "" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "" msgstr[1] "" @@ -5593,7 +6331,7 @@ msgstr "Fel:" msgid "Warning:" msgstr "Varning:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Exportering lyckades" msgid "Model file downloaded." @@ -5611,10 +6349,10 @@ msgstr " Klicka här för att installera den." msgid "WARNING:" msgstr "VARNING:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Modellen behöver support ! Aktivera support inställningarna." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "G-kodens rutt överlappar" msgid "Support painting" @@ -5663,12 +6401,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Bottenlager" -msgid "Enable AI monitoring of printing" -msgstr "Aktivera AI-övervakning av utskrifter" - -msgid "Sensitivity of pausing is" -msgstr "Känsligheten för paus är" - msgid "Enable detection of build plate position" msgstr "Aktivera detektering av byggplattans position" @@ -5679,36 +6411,107 @@ msgstr "" "Lokaliseringsmärket på byggplattan registreras och utskriften pausas om " "märket inte ligger inom det fördefinierade intervallet." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Aktivera AI-övervakning av utskrifter" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Första Lager Inspektion" msgid "Auto-recovery from step loss" msgstr "Automatisk återhämtning vid stegförlust" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Tillåt Prompt Ljud" msgid "Filament Tangle Detect" -msgstr "Filament Tangle Detection" - -msgid "Nozzle Clumping Detection" -msgstr "Nozzle Clumping Detection" +msgstr "" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "" msgid "Nozzle Type" -msgstr "Nozzle Type" +msgstr "Nozzel Typ" -msgid "Stainless Steel" -msgstr "Rostfritt stål" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Härdat stål" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Rostfritt stål" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Global" @@ -5743,6 +6546,9 @@ msgstr "" msgid "Lock current plate" msgstr "" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "" @@ -5752,6 +6558,31 @@ msgstr "" msgid "Customize current plate" msgstr "" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " platta %1%:" @@ -5780,14 +6611,67 @@ msgstr "Uppskattad tid" msgid "Filament changes" msgstr "Filament byten" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Tryck för att redigera inställningar" msgid "Connection" msgstr "Anslutning" -msgid "Bed type" -msgstr "Typ av byggplatta" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Rensnings volymer" @@ -5810,42 +6694,27 @@ msgstr "Sök platta, objekt och del." msgid "Pellets" msgstr "" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"Inga AMS-filament. Välj en skrivare på sidan ”Enhet” för att ladda AMS-" -"information." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Det finns inga kompatibla filament och synkronisering utförs inte." msgid "Sync filaments with AMS" msgstr "Synkronisera filament med AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Synkronisering av filament med AMS kommer att ta bort alla förvalda filament " -"inställningar och färger. Vill du fortsätta?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "" -"Du har redan gjort en synkronisering; vill du bara synkronisera ändringar " -"eller synkronisera allt på nytt?" - -msgid "Sync" -msgstr "Synkronisera" - -msgid "Resync" -msgstr "Synkronisera om" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Det finns inga kompatibla filament och synkronisering utförs inte." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -5854,15 +6723,15 @@ msgstr "Spara ändringarna till \"%1%\"?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Avinstallationen lyckades. Enheten %s(%s) kan nu tas bort från datorn på ett " "säkert sätt." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Utmatning av enheten %s(%s) misslyckades." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Tidigare osparat projekt upptäckt, återställa det?" @@ -5895,26 +6764,46 @@ msgstr "" "Aktivering av traditionell timelapse fotografering kan orsaka ojämnheter i " "ytan. Det rekommenderas att ändra till jämnt läge." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "" msgid "Collapse sidebar" msgstr "" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Laddar fil: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "3mf kommer inte från Snapmaker Orca, laddar endast geometri data." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "3MF kommer inte från Snapmaker Orca, laddar endast geometri data." -msgid "Load 3mf" -msgstr "Ladda 3mf" +msgid "Load 3MF" +msgstr "Ladda 3MF" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" "3mf:s version %s är nyare än %s version %s, Följande nycklar har hittats som " "inte känns igen:" @@ -5922,38 +6811,44 @@ msgstr "" msgid "You'd better upgrade your software.\n" msgstr "Uppdatera mjukvaran.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" "3mf:s version %s är nyare än %s version %s, Föreslår att du uppdaterar din " "programvara." -msgid "Invalid values found in the 3mf:" -msgstr "Ogiltiga värden hittades i 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "Ogiltiga värden hittades i 3MF:" msgid "Please correct them in the param tabs" msgstr "Vänligen korrigera dem i Parameter flikarna" -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "The 3mf has following modified G-code in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Bekräfta att dessa modifierade G-koder är säkra för att förhindra skador på " "maskinen!" -msgid "Modified G-codes" -msgstr "Modified G-code" +msgid "Modified G-code" +msgstr "" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "3mf har följande anpassade filament eller inställningar för printern:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Bekräfta att G-koderna i dessa inställningar är säkra för att förhindra " @@ -5962,8 +6857,8 @@ msgstr "" msgid "Customized Preset" msgstr "Anpassad inställning" -msgid "Name of components inside step file is not UTF8 format!" -msgstr "Komponent namnet i step filen är inte UTF8 format!" +msgid "Name of components inside STEP file is not UTF8 format!" +msgstr "Komponent namnet i STEP filen är inte UTF8 format!" msgid "The name may show garbage characters!" msgstr "På grund av textkodning som inte stöds så kan skräptecken visas!" @@ -6011,12 +6906,22 @@ msgstr "Ladda dessa filer som ett enkelt objekt med multipla delar?\n" msgid "Object with multiple parts was detected" msgstr "Ett objekt med multipla delar har upptäckts" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Filen innehåller ingen geometrisk data." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Objektet verkar vara för stort, vill du skala ner det så att det passar " "byggplattan automatiskt?" @@ -6080,6 +6985,34 @@ msgstr "Välj en ny fil" msgid "File for the replace wasn't selected" msgstr "Ersättningsfilen valdes inte" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Välj en fil" @@ -6125,12 +7058,23 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Endast förhandsgranskningsläge:\n" "Den inlästa filen innehåller endast G-kod, kan inte komma in på sidan " "Förbered" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Fortsätt med redigerings inställningarna till nytt projekt eller avfärda dem" @@ -6156,17 +7100,17 @@ msgstr "Spara projekt" msgid "Importing Model" msgstr "Importerar Modell" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "förbereder 3mf-filen..." msgid "Download failed, unknown file format." -msgstr "Download failed; unknown file format." +msgstr "" -msgid "downloading project ..." +msgid "downloading project..." msgstr "laddar ner projekt ..." msgid "Download failed, File size exception." -msgstr "Download failed; File size exception." +msgstr "" #, c-format, boost-format msgid "Project downloaded %d%%" @@ -6177,13 +7121,23 @@ msgid "" "import it." msgstr "" +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "" msgid "The selected file" msgstr "Den valda filen" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "Innehåller ingen giltlig G-kod." msgid "Error occurs while loading G-code file" @@ -6221,10 +7175,10 @@ msgstr "Endast en G-kod kan öppnas åt gången." msgid "G-code loading" msgstr "Laddar G-kod" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G-kod filer och modeller kan inte laddas tillsammans!!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Det gick inte att lägga till modeller i förhandsvisningsläge" msgid "All objects will be removed, continue?" @@ -6262,28 +7216,32 @@ msgstr "" "Filen %s har skickats till skrivarens lagringsutrymme och kan visas på " "skrivaren." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "Reason: part \"%1%\" is empty." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "Reason: part \"%1%\" does not bound a volume." +msgstr "" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "Reason: part \"%1%\" has self intersection." +msgstr "" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "Reason: \"%1%\" and another part have no intersection." +msgstr "" msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " @@ -6292,21 +7250,15 @@ msgstr "" "Det går inte att utföra booleska operationer på modell mesh. Endast positiva " "delar kommer att exporteras." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "" msgid "Upload and Print" msgstr "" +msgid "Abnormal print file data. Please slice again" +msgstr "Onormal utskrifts fil data. Vänligen bered igen" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6326,8 +7278,33 @@ msgstr "Custom support och färgläggning raderades innan reparation." msgid "Optimize Rotation" msgstr "" -msgid "Invalid number" -msgstr "Ogiltligt nummer" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Inställningar för platta" @@ -6368,9 +7345,6 @@ msgstr "Volym: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Trianglar: %1%\n" -msgid "Tips:" -msgstr "Tips:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6378,14 +7352,40 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Platta% d: %s rekommenderas inte för användning av filament %s(%s). Om du " +"Platta %d: %s rekommenderas inte för användning av filament %s (%s). Om du " "fortfarande vill göra detta utskriftsjobb, vänligen ställ in detta filaments " "byggplattas temperatur till ett tal som inte är noll." +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + msgid "Switching the language requires application restart.\n" msgstr "Byte av språk krävs för omstart.\n" @@ -6401,18 +7401,51 @@ msgstr "Byter språk medans inställningarna ändras." msgid "Changing application language" msgstr "Byter språk" +msgid "Asia-Pacific" +msgstr "Asien-Stillahavsområdet" + +msgid "China" +msgstr "Kina" + +msgid "Europe" +msgstr "Europa" + +msgid "North America" +msgstr "Nordamerika" + +msgid "Others" +msgstr "Andra" + msgid "Changing the region will log out your account.\n" msgstr "Om du ändrar regionen loggas du ut från ditt konto.\n" msgid "Region selection" msgstr "Val av region" -msgid "Second" -msgstr "Andra" +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Säkerhetskopieringens varaktighet i sekunder." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" msgid "Browse" msgstr "Sök" +msgid "Choose folder for downloaded items" +msgstr "" + msgid "Choose Download Directory" msgstr "Välj Nedladdnings Register" @@ -6431,40 +7464,8 @@ msgstr "" msgid "Current Instance Path: " msgstr "" -msgid "General Settings" -msgstr "Allmänna inställningar" - -msgid "Asia-Pacific" -msgstr "Asien-Stillahavsområdet" - -msgid "China" -msgstr "Kina" - -msgid "Europe" -msgstr "Europa" - -msgid "North America" -msgstr "Nordamerika" - -msgid "Others" -msgstr "Andra" - -msgid "Login Region" -msgstr "Logga in Region" - -msgid "Stealth Mode" -msgstr "" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" - -msgid "Enable network plugin" -msgstr "" - -msgid "Check for stable updates only" -msgstr "" +msgid "General" +msgstr "Allmän" msgid "Metric" msgstr "Metrisk" @@ -6475,6 +7476,18 @@ msgstr "Brittisk standard" msgid "Units" msgstr "Enheter" +msgid "Home" +msgstr "" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + +msgid "Enable dark mode" +msgstr "Aktivera mörkt läge" + msgid "Allow only one Snapmaker Orca instance" msgstr "" @@ -6493,13 +7506,105 @@ msgid "" "instead." msgstr "" -msgid "Home" +msgid "Show splash screen" +msgstr "Visa välkomstskärm" + +msgid "Show the splash screen during startup." +msgstr "Visa välkomstskärmen under uppstart." + +msgid "Downloads folder" msgstr "" -msgid "Default Page" +msgid "Target folder for downloaded items" msgstr "" -msgid "Set the page opened on startup." +msgid "Load All" +msgstr "" + +msgid "Ask When Relevant" +msgstr "" + +msgid "Always Ask" +msgstr "" + +msgid "Load Geometry Only" +msgstr "" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Auto säkerhetskopiera" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Säkerhetskopiera ditt projekt med jämna mellanrum för att underlätta " +"återställning efter en tillfällig krasch." + +msgid "Preset" +msgstr "Förinställd" + +msgid "Remember printer configuration" +msgstr "" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Allt" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" msgstr "" msgid "Touchpad" @@ -6514,6 +7619,12 @@ msgid "" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" msgstr "Zooma till musens position" @@ -6525,142 +7636,121 @@ msgstr "" "mitt." msgid "Use free camera" -msgstr "" +msgstr "Använd fri kamera" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" +"Om aktiverat, använd fri kamera. Om inte aktiverat, använd begränsad kamera." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Växla panorerings- och rotationsknapparna på musen" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Om aktiverat växlar vänster och höger musknapps panorerings- och " +"rotationsfunktioner." msgid "Reverse mouse zoom" -msgstr "" +msgstr "Omvänd muszoomning" msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "Om aktiverad, vänder zoomriktningen med mushjulet." + +msgid "Clear my choice on..." msgstr "" -msgid "Show splash screen" +msgid "Unsaved projects" msgstr "" -msgid "Show the splash screen during startup." -msgstr "" - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Visa \"Dagens tips\" efter start" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Om aktiverad visas användbara tips vid start." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Rensnings volymer: Beräkna automatiskt varje gång färgen ändras." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Om aktiverat, beräkna automatiskt varje gång färgen ändras." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "Flushing volumes: Auto-calculate every time the filament is changed." - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "If enabled, auto-calculate every time filament is changed" - -msgid "Remember printer configuration" -msgstr "" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." - -msgid "Network" -msgstr "" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Automatisk synkronisering av användarens förinställningar (skrivare/filament/" -"process)" - -msgid "User Sync" -msgstr "Användar synkronisering" - -msgid "Update built-in Presets automatically." -msgstr "Uppdatera inbyggda förinställningar automatiskt." - -msgid "System Sync" -msgstr "Synkronisering av system" - -msgid "Clear my choice on the unsaved presets." -msgstr "Rensa mitt val för de osparade förinställningarna." - -msgid "Associate files to Snapmaker Orca" -msgstr "Associerade filer till Snapmaker Orca" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "Associerade .3mf files till Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna .3mf filer" - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "Associerade .stl filer till Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna .stl filer" - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "Associera .step/.stp-filer till Snapmaker Orca" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna .step filer" - -msgid "Associate web links to Snapmaker Orca" -msgstr "" - -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "Maximalt antal nyligen genomförda projekt" - -msgid "Maximum count of recent projects" -msgstr "Maximalt antal nyligen genomförda projekt" - msgid "Clear my choice on the unsaved projects." msgstr "Rensa mitt val för de osparade projekten." -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "No warnings when loading 3MF with modified G-code" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "Auto Säkerhetskopiera" +msgid "Clear my choice on the unsaved presets." +msgstr "Rensa mitt val för de osparade förinställningarna." + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Säkerhetskopiera ditt projekt med jämna mellanrum för att underlätta " -"återställning efter en tillfällig krasch." -msgid "every" -msgstr "varje" +msgid "Login region" +msgstr "Logga in region" -msgid "The peroid of backup in seconds." -msgstr "Säkerhetskopieringens varaktighet i sekunder." +msgid "Stealth mode" +msgstr "" -msgid "Downloads" -msgstr "Nedladdningar" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" -msgid "Dark Mode" -msgstr "Mörkt Läge" +msgid "Network test" +msgstr "Nätverkstest" -msgid "Enable Dark mode" -msgstr "Aktivera mörkt läge" +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "" +"Automatisk synkronisering av användarens förinställningar (skrivare/filament/" +"process)" + +msgid "Update built-in Presets automatically." +msgstr "Uppdatera inbyggda förinställningar automatiskt." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" + +msgid "Associate files to Snapmaker Orca" +msgstr "Associerade filer till Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Associerade 3MF filer till Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna 3MF filer." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Associerade STL filer till Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna STL filer." + +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Associera .step/.stp-filer till Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "Om aktiverad, väljs Snapmaker Orca som standard att öppna STEP filer." + +msgid "Associate web links to Snapmaker Orca" +msgstr "" + +msgid "Developer" +msgstr "" msgid "Develop mode" msgstr "Utvecklingsläge" @@ -6668,11 +7758,42 @@ msgstr "Utvecklingsläge" msgid "Skip AMS blacklist check" msgstr "Hoppa över kontrollen av AMS svarta lista" -msgid "Home page and daily tips" -msgstr "Hemsida och dagliga förslag" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Visa hemsida vid uppstart" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Logg Nivå" + +msgid "fatal" +msgstr "allvarlig" + +msgid "error" +msgstr "fel" + +msgid "warning" +msgstr "varning" + +msgid "debug" +msgstr "felsök" + +msgid "trace" +msgstr "spåra" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Sync inställningar" @@ -6713,24 +7834,6 @@ msgstr "Aktivera SSL(FTP)" msgid "Internal developer mode" msgstr "Internt utvecklarläge" -msgid "Log Level" -msgstr "Logg Nivå" - -msgid "fatal" -msgstr "allvarlig" - -msgid "error" -msgstr "fel" - -msgid "warning" -msgstr "varning" - -msgid "debug" -msgstr "felsök" - -msgid "trace" -msgstr "spåra" - msgid "Host Setting" msgstr "Värd Inställning" @@ -6752,10 +7855,10 @@ msgstr "Spar knappen för felsökning" msgid "save debug settings" msgstr "spara felsöknings knappen" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "FELSÖKNINGS inställningarna har sparats!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Moln miljön har bytts ut; vänligen logga in igen!" msgid "System presets" @@ -6767,14 +7870,20 @@ msgstr "Användarens förinställningar" msgid "Incompatible presets" msgstr "Ej giltliga förinställningar" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS-filament" -msgid "Click to pick filament color" -msgstr "Tryck för att välja filament färg" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Välj filament färg" +msgid "Click to select filament color" +msgstr "Tryck för att välja filament färg" msgid "Add/Remove presets" msgstr "Lägg till/Ta bort förinställningar" @@ -6785,36 +7894,57 @@ msgstr "Redigera förinställningar" msgid "Project-inside presets" msgstr "Projekt förinställningar" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Lägg till/Ta bort filament" msgid "Add/Remove materials" msgstr "Lägg till/Ta bort material" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Välj/ta bort printer(systemet inställningar)" msgid "Create printer" msgstr "Skapa printer" +msgid "Empty" +msgstr "Tom" + +msgid "Incompatible" +msgstr "Inkompatibel" + msgid "The selected preset is null!" msgstr "Den valda förinställningen är noll!" msgid "End" -msgstr "End" +msgstr "" msgid "Customize" msgstr "Anpassa" msgid "Other layer filament sequence" -msgstr "Other layer filament sequence" +msgstr "" msgid "Please input layer value (>= 2)." -msgstr "Please input layer value (>= 2)." +msgstr "" msgid "Plate name" msgstr "Plattans namn" +msgid "Same as Global Plate Type" +msgstr "Samma som Global Bed Type" + +msgid "Bed type" +msgstr "Typ av byggplatta" + msgid "Same as Global Print Sequence" msgstr "Samma som Global Utskrifts Sekvens" @@ -6822,10 +7952,10 @@ msgid "Print sequence" msgstr "Utskrifts sekvens" msgid "Same as Global" -msgstr "Same as Global" +msgstr "" msgid "Disable" -msgstr "Disable" +msgstr "" msgid "Spiral vase" msgstr "Spiral vas" @@ -6833,9 +7963,6 @@ msgstr "Spiral vas" msgid "First layer filament sequence" msgstr "Första lagrets filament sekvens" -msgid "Same as Global Plate Type" -msgstr "Samma som Global Bed Type" - msgid "Same as Global Bed Type" msgstr "Samma som Global Bed Type" @@ -6854,28 +7981,28 @@ msgstr "Logga ut" msgid "Slice all plate to obtain time and filament estimation" msgstr "Bered alla plattor för att mottaga tid och filament uppskattning" -msgid "Packing project data into 3mf file" -msgstr "Packa projekt data till 3mf fil" +msgid "Packing project data into 3MF file" +msgstr "Packa projekt data till 3MF fil" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Laddar upp 3mf" msgid "Jump to model publish web page" msgstr "Växla till modell publicerings hemsidan" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Notera: Förberedelserna kan ta flera minuter. Vänligen vänta." msgid "Publish" msgstr "Publicera" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Publiceringen avbröts" msgid "Slicing Plate 1" msgstr "Beredningsplatta 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Packar data till 3mf" msgid "Jump to webpage" @@ -6894,7 +8021,7 @@ msgstr "Projekt förinställning" msgid "Name is unavailable." msgstr "Namnet ej tillgängligt." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "Ej tillåtet att skriva över system profilen" #, boost-format @@ -6902,11 +8029,13 @@ msgid "Preset \"%1%\" already exists." msgstr "Förinställning \"%1%\" finns redan." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "" "Förinställning \"%1%\" finns redan och fungerar inte med nuvarande skrivare." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "" "Observera att om du sparar kommer den aktuella förinställningen att skrivas " "över" @@ -6944,41 +8073,14 @@ msgstr "Byta till \"%1%\"" msgid "Task canceled" msgstr "Uppgift avbruten" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Sök" - -msgid "My Device" -msgstr "Min Enhet" - -msgid "Other Device" -msgstr "Andra Enheter" - -msgid "Online" -msgstr "Online" - -msgid "Input access code" -msgstr "Inmatning av åtkomstkod" - -msgid "Can't find my devices?" -msgstr "Hittar du inte enheter?" - -msgid "Log out successful." -msgstr "Utloggning lyckades." - -msgid "Busy" -msgstr "Upptagen" - msgid "Bambu Cool Plate" -msgstr "Bambu Cool Plate" +msgstr "" msgid "PLA Plate" msgstr "PLA platta" msgid "Bambu Engineering Plate" -msgstr "Bambu Engineering Plate" +msgstr "" msgid "Bambu Smooth PEI Plate" msgstr "" @@ -6989,14 +8091,53 @@ msgstr "Högtemperatur platta" msgid "Bambu Textured PEI Plate" msgstr "" -msgid "Send print job to" -msgstr "Skicka utskriftsjobb till" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Kalibrering av flödesdynamik" -msgid "Click here if you can't connect to the printer" -msgstr "Klicka här om du inte kan ansluta till printern" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "Skicka komplett" @@ -7004,59 +8145,15 @@ msgstr "Skicka komplett" msgid "Error code" msgstr "Felkod" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Inget inloggningskonto, bara skrivare i LAN-läge visas" - -msgid "Connecting to server" -msgstr "Ansluter till server" - -msgid "Synchronizing device information" -msgstr "Synkroniserar enhetsinformation" - -msgid "Synchronizing device information time out" -msgstr "Time-out för synkronisering av enhetsinformation" - -msgid "Cannot send the print job when the printer is updating firmware" +msgid "High Flow" msgstr "" -"Det går inte att skicka ett utskriftsjobb medan skrivaren uppdaterar firmware" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"Skrivaren utför instruktioner. Vänligen starta utskriften igen när den är " -"avslutad." - -msgid "The printer is busy on other print job" -msgstr "Skrivaren är upptagen med ett annat utskriftsjobb." #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Filament %s överskrider antalet AMS-fack. Uppdatera skrivarens programvara " -"för att stödja tilldelning av AMS-fack." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament överskrider antalet AMS-fack. Uppdatera skrivarens programvara för " -"att stödja tilldelning av AMS-fack." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Filament i AMS facken har fastställts. Du kan klicka på ett filament ovan " -"för att ändra dess plats i AMS facken" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Klicka på varje filament ovan för att ange dess plats i AMS-facken innan du " -"skickar utskriftsjobbet" #, c-format, boost-format msgid "" @@ -7073,61 +8170,38 @@ msgstr "" "Filamentet matchar inte filamentet i AMS-facket. Uppdatera skrivarens " "programvara för att stödja tilldelning av AMS-fack." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Skrivarens firmware stöder endast sekventiell mappning av filament => AMS-" -"fack plats." - -msgid "An SD card needs to be inserted before printing." -msgstr "Ett Micro SD-kort måste sättas i innan utskrift." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Ett Micro SD-kort måste sättas i för att spela in en timelapse." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Det går inte att skicka utskriftsjobbet till en skrivare vars fasta " -"programvara måste uppdateras." - -msgid "Cannot send the print job for empty plate" -msgstr "Det går inte att skicka ett utskriftsjobb för en tom platta." - -msgid "This printer does not support printing all plates" -msgstr "Den här skrivaren stöder inte utskrift av alla byggplattor" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." msgstr "" -"When spiral vase mode is enabled, machines with I3 structure will not " -"generate timelapse videos." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" -"\"." msgid "Errors" msgstr "Fel" -msgid "Please check the following:" -msgstr "Kontrollera följande:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7144,33 +8218,11 @@ msgstr "" "filament som krävs. Om de är okej, klicka du på \"Confirm\" för att börja " "skriva ut." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "nozzel i inställning: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "nozzel memorerat: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Your nozzle diameter in sliced file is not consistent with the saved nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" +msgid "Please check the following:" +msgstr "Kontrollera följande:" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Please fix the error above, otherwise printing cannot continue." +msgstr "" msgid "" "Please click the confirm button if you still want to proceed with printing." @@ -7178,29 +8230,208 @@ msgstr "" "Klicka på knappen Bekräfta om du fortfarande vill fortsätta med utskriften." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"Ansluter till skrivaren. Det går inte att avbryta under anslutnings " -"processen." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Varning! Flödes kalibrering på texturerade PEI plattor kan misslyckas på " -"grund av ytan." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Automatic flow calibration using the Micro Lidar" +msgid "Preparing print job" +msgstr "Förbereder utskriftsjobb" -msgid "Modifying the device name" -msgstr "Ändra enhetens namn" +msgid "The name length exceeds the limit." +msgstr "Namnlängden överskrider gränsen." -msgid "Bind with Pin Code" -msgstr "Bind with Pin Code" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Skicka till skrivarens MicroSD-kort" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Klicka här om du inte kan ansluta till printern" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Inget inloggningskonto, bara skrivare i LAN-läge visas" + +msgid "Connecting to server..." +msgstr "Ansluter till server" + +msgid "Synchronizing device information..." +msgstr "Synkroniserar enhetsinformation" + +msgid "Synchronizing device information timed out." +msgstr "Time-out för synkronisering av enhetsinformation" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "" +"Det går inte att skicka ett utskriftsjobb medan skrivaren uppdaterar firmware" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Skrivaren utför instruktioner. Vänligen starta utskriften igen när den är " +"avslutad." + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Det går inte att skicka utskriftsjobbet till en skrivare vars fasta " +"programvara måste uppdateras." + +msgid "Cannot send a print job for an empty plate." +msgstr "Det går inte att skicka ett utskriftsjobb för en tom platta." + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Den här skrivaren stöder inte utskrift av alla byggplattor" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Det går inte att skicka utskriftsuppgiften när uppgraderingen pågår" @@ -7209,14 +8440,14 @@ msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" "Den valda skrivaren är inte kompatibel med de valda skrivar inställningarna." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Ett MicroSD-kort måste sättas i innan du skickar till skrivaren." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Skrivaren måste finnas på samma LAN som Snapmaker Orca." -msgid "The printer does not support sending to printer SD card." -msgstr "Skrivaren har inte stöd för att skicka till skrivarens MicroSD kort." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Beredning klar." @@ -7255,28 +8486,26 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." msgid "Can't find Pin Code?" -msgstr "Can't find Pin Code?" +msgstr "" msgid "Pin Code" -msgstr "Pin Code" +msgstr "" msgid "Binding..." -msgstr "Binding..." +msgstr "" msgid "Please confirm on the printer screen" -msgstr "Please confirm on the printer screen" +msgstr "" msgid "Log in failed. Please check the Pin Code." -msgstr "Log in failed. Please check the Pin Code." +msgstr "" msgid "Log in printer" msgstr "Logga in skrivare" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Logga in skrivaren till nuvarande konto?" msgid "Check the reason" @@ -7289,10 +8518,10 @@ msgid "Terms and Conditions" msgstr "Villkor och bestämmelser" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu Lab " @@ -7322,11 +8551,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "I 3D-utskrifts gemenskapen lär vi oss av varandras framgångar och " "misslyckanden för att justera våra egna berednings parametrar och " @@ -7380,14 +8609,29 @@ msgstr "" "förinställningen." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Prime tower krävs för smooth timelapse-läge. Det kan bli fel på modellen " "utan ett prime tower. Är du säker på att du vill inaktivera prime tower?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "Prime tower krävs för Smooth timelapse-läge. Det kan bli fel på modellen " @@ -7397,43 +8641,38 @@ msgid "Still print by object?" msgstr "Fortfarande utskrift per objekt?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Vi har lagt till en experimentell stil \"Tree Slim\" som har mindre support " -"volym men svagare styrka.\n" -"Vi rekommenderar att du använder den tillsammans med: 0 gränssnitts lager, 0 " -"övre avstånd, 2 väggar." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Vid användning av stödmaterial för stödgränssnittet rekommenderar vi " +"följande inställningar:\n" +"0 top z-avstånd, 0 gränssnittsavstånd, koncentriskt mönster och " +"inaktivera oberoende stödskiktshöjd." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Ändra dessa inställningar automatiskt? \n" +"Ändra dessa inställningar automatiskt?\n" "Ja - Ändra dessa inställningar automatiskt.\n" "Nej - Ändra inte dessa inställningar för mig." msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"För ”Tree Strong” och ”Tree Hybrid” stilar rekommenderar vi följande " -"inställningar: minst 2 anläggnings lager, minst 0,1 mm topp z-avstånd eller " -"med support material på anläggningsytan." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Vid användning av stödmaterial för stödgränssnittet rekommenderar vi " -"följande inställningar:\n" -"0 top z-avstånd, 0 gränssnittsavstånd, koncentriskt mönster och inaktivera " -"oberoende stödskiktshöjd" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7444,6 +8683,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7451,13 +8698,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Lagerhöjden överskrider gränsen i Skrivarinställningar -> Extruder -> " "Lagerhöjds gränser, detta kan orsaka problem med utskriftskvaliteten." -msgid "Adjust to the set range automatically? \n" -msgstr "Justera automatiskt till det inställda området? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Justera automatiskt till det inställda området?\n" msgid "Adjust" msgstr "Justera" @@ -7467,25 +8714,17 @@ msgstr "Ignorera" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"Experimental feature: Retracting and cutting off the filament at a greater " "distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications. Please use with the latest printer firmware." +msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7498,6 +8737,75 @@ msgstr "" "genom att högerklicka på den tomma positionen på byggplattan och välja " "\"Lägg till Primitiv\"->\"Timelapse Wipe Tower\"." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" + +msgid "Modifications to the current profile will be saved." +msgstr "" + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" + +msgid "Detach preset" +msgstr "" + +msgid "This is a default preset." +msgstr "" + +msgid "This is a system preset." +msgstr "" + +msgid "Current preset is inherited from the default preset." +msgstr "" + +msgid "Current preset is inherited from" +msgstr "" + +msgid "It can't be deleted or modified." +msgstr "" + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" + +msgid "To do that please specify a new name for the preset." +msgstr "" + +msgid "Additional information:" +msgstr "" + +msgid "vendor" +msgstr "" + +msgid "printer model" +msgstr "" + +msgid "default print profile" +msgstr "" + +msgid "default filament profile" +msgstr "" + +msgid "default SLA material profile" +msgstr "" + +msgid "default SLA print profile" +msgstr "" + +msgid "full profile name" +msgstr "" + +msgid "symbolic profile name" +msgstr "" + msgid "Line width" msgstr "Linjebredd" @@ -7564,15 +8872,27 @@ msgstr "Raft" msgid "Support filament" msgstr "Support filament" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "" -msgid "Skirt" +msgid "Multimaterial" msgstr "" msgid "Prime tower" msgstr "Prime torn" +msgid "Filament for Features" +msgstr "" + +msgid "Ooze prevention" +msgstr "" + +msgid "Skirt" +msgstr "" + msgid "Special mode" msgstr "Special läge" @@ -7583,7 +8903,7 @@ msgid "Post-processing Scripts" msgstr "Skript för efterbehandling" msgid "Notes" -msgstr "Notes" +msgstr "" msgid "Frequent" msgstr "Återkommande" @@ -7626,42 +8946,50 @@ msgstr "" "Rekommenderat nozzel temperaturs område för detta filament. 0 betyder inte " "fastställt" +msgid "Flow ratio and Pressure Advance" +msgstr "" + msgid "Print chamber temperature" msgstr "" msgid "Print temperature" msgstr "Utskrifts temperatur" -msgid "Nozzle" -msgstr "Nozzel" - msgid "Nozzle temperature when printing" msgstr "Nozzel temperatur vid utskrift" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "Kall platta" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Detta är byggplattans temperatur när Cool Plate är installerad. Värdet 0 " "betyder att filamentet inte stöder utskrift på Cool Plate." -msgid "Textured Cool plate" +msgid "Textured Cool Plate" msgstr "" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -msgid "Engineering plate" -msgstr "Engineering plate" +msgid "Engineering Plate" +msgstr "" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Detta är byggplattans temperatur när Engineering Plate är installerad. Ett " "värde på 0 betyder att filamentet inte stöder utskrift på Engineering Plate." @@ -7670,9 +8998,9 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Slät PEI platta / Högtemperaturs platta" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Bäddtemperatur när slät PEI-platta/Högtemperatur platta är installerad. " "Värde 0 betyder att filamentet inte stöder utskrift på den släta PEI-plattan/" @@ -7682,8 +9010,8 @@ msgid "Textured PEI Plate" msgstr "Texturerad PEI-platta" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" "Byggplattans temperatur när texturerad PEI-platta är installerad. 0 betyder " "att filamentet inte stöds på den texturerade PEI-plattan" @@ -7691,9 +9019,6 @@ msgstr "" msgid "Volumetric speed limitation" msgstr "Volumetrisk hastighets begränsning" -msgid "Cooling" -msgstr "Kylning" - msgid "Cooling for specific layer" msgstr "Kylning för valda lager" @@ -7710,7 +9035,7 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." +"beräknade lagringstiden inte är längre än lagringstiden i inställningarna. " "När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " "mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" @@ -7742,25 +9067,34 @@ msgstr "Filament start G-kod" msgid "Filament end G-code" msgstr "Filament stop G-kod" -msgid "Multimaterial" -msgstr "" - msgid "Wipe tower parameters" msgstr "" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" msgstr "" -msgid "Ramming settings" +msgid "Tool change parameters with single extruder MM printers" msgstr "" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Set" +msgstr "Välj" + +msgid "Tool change parameters with multi extruder MM printers" msgstr "" +msgid "Dependencies" +msgstr "" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Kompatibla process profiler" + msgid "Printable space" msgstr "Utskriftsbar yta" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "" @@ -7783,7 +9117,7 @@ msgstr "" msgid "Accessory" msgstr "Tillbehör" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "Maskin G-kod" msgid "Machine start G-code" @@ -7801,8 +9135,11 @@ msgstr "Före lagerskifte G-kod" msgid "Layer change G-code" msgstr "Lagerskifte G-kod" -msgid "Time lapse G-code" -msgstr "Time lapse G-kod" +msgid "Timelapse G-code" +msgstr "Timelapse G-kod" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" msgstr "Byta filament G-kod" @@ -7822,6 +9159,12 @@ msgstr "Rörelseförmåga" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Hastighets begränsning" @@ -7831,19 +9174,37 @@ msgstr "Accelerations begränsning" msgid "Jerk limitation" msgstr "Jerk begränsning" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "" +msgid "Number of extruders of the printer." +msgstr "" + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" + +msgid "Nozzle diameter" +msgstr "Nozzel diameter" + msgid "Wipe tower" msgstr "" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" +msgstr "" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" msgstr "" msgid "Layer height limits" msgstr "Lagerhöjds begränsning" -msgid "Lift Z Enforcement" +msgid "Z-Hop" msgstr "" msgid "Retraction when switching material" @@ -7861,6 +9222,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Firmware Retraktion" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Fristående" @@ -7872,7 +9241,7 @@ msgstr "" "%d Filament inställning och %d Process inställning är kopplade till denna " "printer. Dessa inställningar raderas om printern raderas." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "Inställningar som ärvts av andra inställningar kan inte raderas!" msgid "The following presets inherit this preset." @@ -7894,24 +9263,17 @@ msgstr[1] "" "Följande förinställning raderas också.@Följande förinställningar raderas " "också." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Är du säker på att du vill radera den valda inställningen? \n" -"Om inställningen motsvarar ett filament som för närvarande används på din " -"skrivare, vänligen återställ filament informationen för den platsen." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Välja %1% den valda förinställningen?" -msgid "All" -msgstr "Allt" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Välj" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8004,15 +9366,13 @@ msgstr "" "innehåller följande osparade ändringar:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "" msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" -"\n" -"You can save or discard the preset values you have modified." msgid "" "\n" @@ -8021,7 +9381,7 @@ msgid "" msgstr "" msgid "You have previously modified your settings." -msgstr "You have previously modified your settings." +msgstr "" msgid "" "\n" @@ -8032,9 +9392,6 @@ msgstr "" msgid "Extruders count" msgstr "Extruder kalkylering" -msgid "General" -msgstr "Allmän" - msgid "Capabilities" msgstr "Förmågor" @@ -8093,6 +9450,9 @@ msgstr "Författare" msgid "Model Name" msgstr "Modell Namn" +msgid "Description:" +msgstr "Förklaring:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Uppdatering" @@ -8103,22 +9463,19 @@ msgstr "En ny version är tillgänglig" msgid "Configuration update" msgstr "Konfigurerings uppdatering" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Ett nytt konfigurations paket finns tillgängligt, Installera?" -msgid "Description:" -msgstr "Förklaring:" - msgid "Configuration incompatible" msgstr "Ej kompatibel konfiguration" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "konfigurations paketet är ej kompatibel med nuvarande applicering." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Konfigurations paketet är ej kompatibel med nuvarande applicering.\n" "%s uppdaterar konfigurations paketet för att möjliggöra start" @@ -8127,11 +9484,6 @@ msgstr "" msgid "Exit %s" msgstr "Avsluta %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "" -"konfigurations paketet är ej kompatibel med nuvarande version av Bambu " -"Studio." - msgid "Configuration updates" msgstr "Konfigurationen uppdateras" @@ -8141,59 +9493,218 @@ msgstr "Inga uppdateringar tillgängliga." msgid "The configuration is up to date." msgstr "Konfigurationen är aktuell." -msgid "Obj file Import color" -msgstr "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" msgid "Specify number of colors:" -msgstr "Specify number of colors:" +msgstr "" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " -msgstr "Recommended " +msgstr "" -msgid "Current filament colors:" -msgstr "Current filament colors:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Quick set:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" -msgstr "Color match" +msgstr "" msgid "Approximate color matching." -msgstr "Approximate color matching." +msgstr "" msgid "Append" -msgstr "Append" +msgstr "" -msgid "Add consumable extruder after existing extruders." -msgstr "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." -msgstr "Reset mapped extruders." +msgstr "" -msgid "Cluster colors" -msgstr "Cluster colors" - -msgid "Map Filament" -msgstr "Map Filament" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" +"\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Warning: The count of newly added and \n" -" current extruders exceeds 16." msgid "Ramming customization" msgstr "" @@ -8210,33 +9721,23 @@ msgid "" "jams, extruder wheel grinding into filament etc." msgstr "" -msgid "Total ramming time" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." msgstr "" -msgid "s" -msgstr "s" - -msgid "Total rammed volume" +msgid "Total ramming" msgstr "" -msgid "Ramming line width" +msgid "Volume" msgstr "" -msgid "Ramming line spacing" +msgid "Ramming line" msgstr "" -msgid "Auto-Calc" -msgstr "Autoberäkna" - -msgid "Re-calculate" -msgstr "Utför beräkningen igen" - -msgid "Flushing volumes for filament change" -msgstr "Rensnings volym för filament byte" - msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." @@ -8250,23 +9751,23 @@ msgstr "Förslag: Rensnings volym i intervallet [%d, %d]" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Multiplikatorn ska ligga inom intervallet [%.2f, %.2f]." +msgid "Re-calculate" +msgstr "Utför beräkningen igen" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Multiplikator" -msgid "unloaded" -msgstr "utmatad" +msgid "Flushing volumes for filament change" +msgstr "Rensnings volym för filament byte" -msgid "loaded" -msgstr "laddad" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "Från" - -msgid "To" -msgstr "Till" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8280,7 +9781,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" msgid "" @@ -8290,7 +9791,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" @@ -8318,12 +9819,6 @@ msgstr "Objektlista" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importera geometri data från STL/STEP/3MF/OBJ/AMF filer" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Skift+G" - msgid "Paste from clipboard" msgstr "Klistra in ifrån urklipp" @@ -8339,68 +9834,42 @@ msgstr "Visa tangentbordets genvägs lista" msgid "Global shortcuts" msgstr "Övergripande genvägar" -msgid "Rotate View" -msgstr "Rotera vy" - msgid "Pan View" msgstr "Panoreringsvy" -msgid "Mouse wheel" -msgstr "Mus hjul" +msgid "Rotate View" +msgstr "Rotera vy" msgid "Zoom View" msgstr "Zoomvy" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Auto placera valda objekt eller alla objekt. Om det finns valda objekt så " -"placeras endast dem. Alternativt så placeras alla objekt på nuvarande disk." +"placeras endast dem. Annars kommer den att orientera alla objekt i det " +"aktuella projektet." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Placera alla föremål automatiskt på aktuell tallrik." msgid "Collapse/Expand the sidebar" msgstr "Dölj/Visa meny" -msgid "⌘+Any arrow" -msgstr "⌘+Valfri pil" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Rörelse i kamera område" -msgid "⌥+Left mouse button" -msgstr "⌥+Vänster musknapp" - msgid "Select a part" msgstr "Välj del" -msgid "⌘+Left mouse button" -msgstr "⌘+Vänster musknapp" - msgid "Select multiple objects" msgstr "Välj flera objekt" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Valfri pil" - -msgid "Alt+Left mouse button" -msgstr "Alt+Vänster musknapp" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+vänster musknapp" - -msgid "Shift+Left mouse button" -msgstr "Shift+Vänster musknapp" - msgid "Select objects by rectangle" msgstr "Välj objekt efter rektangel" @@ -8428,9 +9897,6 @@ msgstr "Pil Höger" msgid "Move selection 10 mm in positive X direction" msgstr "Flytta markeringen 10mm i positiv X riktning" -msgid "Shift+Any arrow" -msgstr "Shift+valfri pil" - msgid "Movement step set to 1 mm" msgstr "Rörelse steg är vald till 1mm" @@ -8464,17 +9930,23 @@ msgstr "Välj alla objekt" msgid "Gizmo move" msgstr "Gizmo flytta" +msgid "Gizmo rotate" +msgstr "Gizmo rotera" + msgid "Gizmo scale" msgstr "Gizmo skala" -msgid "Gizmo rotate" -msgstr "Gizmo rotera" +msgid "Gizmo place face on bed" +msgstr "Gizmo placera ansiktet på byggytan" msgid "Gizmo cut" msgstr "Gizmo skär" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Placera ansiktet på byggytan" +msgid "Gizmo mesh boolean" +msgstr "Gizmo mesh boolean" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "Gizmo SLA support punkter" @@ -8482,17 +9954,26 @@ msgstr "Gizmo SLA support punkter" msgid "Gizmo FDM paint-on seam" msgstr "Gizmo FDM målad söm" -msgid "Gizmo Text emboss / engrave" -msgstr "" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo textprägling/gravering" + +msgid "Gizmo measure" +msgstr "Gizmo mäta" + +msgid "Gizmo assemble" +msgstr "Gizmo montera" + +msgid "Gizmo brim ears" +msgstr "Gizmo brätte öron" msgid "Zoom in" -msgstr "" +msgstr "Zooma in" msgid "Zoom out" -msgstr "" +msgstr "Zooma ut" msgid "Switch between Prepare/Preview" -msgstr "" +msgstr "Växla mellan Förbered/Förhandsgranska" msgid "Plater" msgstr "Plätering/Förgyllning" @@ -8500,32 +9981,20 @@ msgstr "Plätering/Förgyllning" msgid "Move: press to snap by 1mm" msgstr "Flytta: tryck för att låsa med 1mm" -msgid "⌘+Mouse wheel" -msgstr "⌘+Mushjul" - msgid "Support/Color Painting: adjust pen radius" msgstr "Support/Färgläggning: justera penn radie" -msgid "⌥+Mouse wheel" -msgstr "⌥+Mushjul" - msgid "Support/Color Painting: adjust section position" msgstr "Support/Färgläggning:justera sektions positionen" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+mushjul" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Mushjul" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Välj extruder nummer för objekten och delarna" -msgid "Delete objects, parts, modifiers " -msgstr "Radera objekten, delarna och anpassningar " +msgid "Delete objects, parts, modifiers" +msgstr "Radera objekten, delarna och anpassningar" msgid "Select the object/part and press space to change the name" msgstr "Välj objektet/delen och tryck space för att ändra namnet" @@ -8554,15 +10023,12 @@ msgstr "Horisontell reglage - Flytta aktivt tryck Höger" msgid "On/Off one layer mode of the vertical slider" msgstr "På/Av 1 lager läge för det vertikala reglaget" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "" msgid "Move slider 5x faster" msgstr "Flytta reglage 5x snabbare" -msgid "Shift+Mouse wheel" -msgstr "Shift+Mushjulet" - msgid "Horizontal slider - Move to start position" msgstr "" @@ -8573,7 +10039,7 @@ msgid "Release Note" msgstr "Meddelande om utgåvan" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "version %s uppdaterings information:" msgid "Network plug-in update" @@ -8586,7 +10052,7 @@ msgstr "" "Studio startar." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "En ny nätverksplugin (%s) är tillgänglig. Vill du installera den?" msgid "New version of Snapmaker Orca" @@ -8595,61 +10061,29 @@ msgstr "Ny version av Snapmaker Orca" msgid "Skip this Version" msgstr "Hoppa över denna version" -msgid "Done" -msgstr "Klar" - -msgid "resume" -msgstr "resume" - -msgid "Resume Printing" -msgstr "Resume Printing" - -msgid "Resume Printing(defects acceptable)" -msgstr "Resume Printing (defects acceptable)" - -msgid "Resume Printing(problem solved)" -msgstr "Resume Printing (problem solved)" - -msgid "Stop Printing" -msgstr "Stop Printing" - -msgid "Check Assistant" -msgstr "Check Assistant" - -msgid "Filament Extruded, Continue" -msgstr "Filament Extruded, Continue" - -msgid "Not Extruded Yet, Retry" -msgstr "Not Extruded Yet, Retry" - -msgid "Finished, Continue" -msgstr "Finished, Continue" - -msgid "Load Filament" -msgstr "Ladda Filament" - -msgid "Filament Loaded, Resume" -msgstr "Filament Loaded, Resume" - -msgid "View Liveview" -msgstr "View Liveview" - msgid "Confirm and Update Nozzle" msgstr "Bekräfta och uppdatera nozzeln" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN-anslutning misslyckades (skickar utskriftsfil)" - -msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." -msgstr "Steg 1: Bekräfta att Snapmaker Orca och din skrivare finns på samma LAN." - -msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +msgid "Connect the printer using IP and access code" +msgstr "" + +msgid "" +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" + +msgid "" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Steg 2, om IP- och åtkomst koden nedan skiljer sig från de faktiska värdena " -"på skrivaren, korrigera dem." msgid "IP" msgstr "IP" @@ -8657,18 +10091,42 @@ msgstr "IP" msgid "Access Code" msgstr "Behörighetskod: " +msgid "Printer model" +msgstr "" + +msgid "Printer name" +msgstr "" + msgid "Where to find your printer's IP and Access Code?" msgstr "Var hittar du skrivarens IP- och åtkomstkod?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "Steg 3: Pinga IP-adressen för att kontrollera paketförlust och latens." +msgid "Connect" +msgstr "" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "IP- och åtkomstkoder verifierade! Du kan stänga fönstret" +msgid "connecting..." +msgstr "" + +msgid "Failed to connect to printer." +msgstr "" + +msgid "Failed to publish login request." +msgstr "" + +msgid "The printer has already been bound." +msgstr "" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" + +msgid "Connecting to printer... The dialog will close later" +msgstr "" + msgid "Connection failed, please double check IP and Access Code" msgstr "Anslutningen misslyckades, kontrollera IP och åtkomstkod" @@ -8679,31 +10137,51 @@ msgstr "" "Anslutningen misslyckades! Om din IP-adress och åtkomstkod är korrekta, \n" "gå vidare till steg 3 för felsökning av nätverksproblem" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Modell:" -msgid "Serial:" -msgstr "Serienummer:" - -msgid "Version:" -msgstr "Version:" - msgid "Update firmware" msgstr "Uppdatera programvara" msgid "Beta version" msgstr "Betaversion" -msgid "Latest version" -msgstr "Senaste version" - msgid "Updating" msgstr "Uppdaterar" -msgid "Updating failed" +msgid "Update failed" msgstr "Uppdateringen misslyckades" -msgid "Updating successful" +msgid "Update successful" msgstr "Uppdateringen lyckades" msgid "" @@ -8734,8 +10212,8 @@ msgstr "" msgid "Extension Board" msgstr "Utöknings enhet" -msgid "Saving objects into the 3mf failed." -msgstr "Sparande av objektet till 3mf misslyckades." +msgid "Saving objects into the 3MF failed." +msgstr "Sparande av objektet till 3MF misslyckades." msgid "Only Windows 10 is supported." msgstr "Endast Windows 10 stöds." @@ -8758,23 +10236,23 @@ msgstr "Reparation misslyckades." msgid "Loading repaired objects" msgstr "Laddar de reparerade objekten" -msgid "Exporting 3mf file failed" -msgstr "Export av 3mf filen misslyckades" +msgid "Exporting 3MF file failed" +msgstr "Exporterar av 3MF filen misslyckades" -msgid "Import 3mf file failed" -msgstr "Importen av 3mf filen misslyckades" +msgid "Import 3MF file failed" +msgstr "Importen av 3MF filen misslyckades" -msgid "Repaired 3mf file does not contain any object" -msgstr "Den reparerade 3mf filen innehåller inga objekt" +msgid "Repaired 3MF file does not contain any object" +msgstr "Den reparerade 3MF filen innehåller inga objekt" -msgid "Repaired 3mf file contains more than one object" -msgstr "Den reparerade 3mf filen innehåller mer än ett objekt" +msgid "Repaired 3MF file contains more than one object" +msgstr "Den reparerade 3MF filen innehåller mer än ett objekt" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Den reparerade 3mf filen innehåller ingen volym" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Den reparerade 3MF filen innehåller ingen volym" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Den reparerade 3mf filen innehåller mer än en volym" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Den reparerade 3MF filen innehåller mer än en volym" msgid "Repair finished" msgstr "Reparation klar" @@ -8802,7 +10280,7 @@ msgid "" "One object has empty initial layer and can't be printed. Please Cut the " "bottom or enable supports." msgstr "" -"Ett objekt har ett tomt första lager och kan inte skrivas ut.Skär ut botten " +"Ett objekt har ett tomt första lager och kan inte skrivas ut. Skär ut botten " "eller aktivera support." #, boost-format @@ -8824,7 +10302,12 @@ msgid "No object can be printed. Maybe too small" msgstr "Inget objekt kan skrivas ut. Det kan vara för litet" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Misslyckades att skapa G-kod för ogiltlig custom G-kod.\n" @@ -8837,6 +10320,15 @@ msgstr "Kontrollera custom G-kod elleranvänd standard custom G-kod." msgid "Generating G-code: layer %1%" msgstr "Skapar G-kod: lager %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Inre vägg" @@ -8874,7 +10366,7 @@ msgid "Multiple" msgstr "Flertalet" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Misslyckades att kalkylera linjebredden av %1%. Kan inte få värdet av “%2%” " @@ -8990,13 +10482,15 @@ msgstr "%1% är för nära andra och kan orsaka kollisioner." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% är för hög, och kollisioner kommer att uppstå." -msgid " is too close to others, there may be collisions when printing." -msgstr " är för nära andra; det kan uppstå kollisioner vid utskrift." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " är för nära undantagsområdet, det kan förekomma kollisioner vid utskrift." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Prime Torn" @@ -9008,12 +10502,34 @@ msgstr "" " är för nära uteslutningsområdet, och kollisioner kommer att orsakas.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Multipla filament som har större temperatur skillnader kan inte skrivas ut " -"tillsammans. Extruder och nozzel kan blockeras eller skadas under utskrift" msgid "No extrusions under current settings." msgstr "Nuvarande inställning har ingen extrudering." @@ -9024,6 +10540,15 @@ msgid "" msgstr "" "Smooth läge för timelapse stöds inte när ”per objekt” -sekvens är aktiverad." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9037,6 +10562,12 @@ msgid "" msgstr "" "Spiral Vase läge fungerar inte när objektet innehåller mer än ett material." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "" @@ -9056,11 +10587,10 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Variabel lagerhöjd stöds inte med organiska support." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Olika nozzel diametrar och olika filament diametrar är inte tillåtna när " -"prime tower är aktiverat." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9070,9 +10600,9 @@ msgstr "" "(use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Förebyggande av läckage stöds för närvarande inte med prime tower aktiverat." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9091,20 +10621,26 @@ msgstr "" "Ett Prime Torn stöds inte med adaptiv lagerhöjd är aktiverad. Det kräver att " "samtliga objekt har samma lagerhöjd." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "" "Ett Prime Torn kräver att \"mellanrums ifyllnaden\" är av multipla lager " "höjder" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "Ett Prime Torn kräver att alla objekt har samma lagerhöjd" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "" "Ett Prime Torn kräver att alla objekt skrivs ut med samma antal Raft lager" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -9112,15 +10648,26 @@ msgstr "Ett Prime Torn kräver att alla object är beredda med samma lagerhöjd. msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "Prime Tower stöds endast om alla objekt har samma variabla lagerhöjd." +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "För liten linjebredd" msgid "Too large line width" msgstr "För stor linjebredd" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "Ett Prime Torn kräver att support har samma lagerhöjd som objektet." @@ -9145,7 +10692,7 @@ msgid "" msgstr "" "Tvingande support används men support är inte aktiverad. Aktivera support." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "Lagerhöjden kan inte överstiga nozzel diametern" msgid "" @@ -9181,6 +10728,15 @@ msgid "" "get higher speeds." msgstr "" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9199,6 +10755,16 @@ msgid "" "configuration to get higher speeds." msgstr "" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" + msgid "Generating skirt & brim" msgstr "Skapar Skirt & Brim" @@ -9211,9 +10777,15 @@ msgstr "Skapar G-kod" msgid "Failed processing of the filename_format template." msgstr "Skapande av filnamn_format template misslyckades." +msgid "Printer technology" +msgstr "" + msgid "Printable area" msgstr "Utskriftsbar yta" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Utesluten yta av byggplattan" @@ -9237,8 +10809,8 @@ msgid "Elephant foot compensation" msgstr "Elefant fots kompensation" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" "Minska första lager på byggplattan för att kompensera elefant fots effekten" @@ -9257,7 +10829,7 @@ msgstr "lager" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Lagerhöjd för varje lager. Mindre lagerhöjd ger mer exakt tolerans men ökar " "även utskriftstiden" @@ -9265,13 +10837,21 @@ msgstr "" msgid "Printable height" msgstr "Utskriftsbar höjd" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "Maximala utskriftshöjd begränsas av skrivarens mekanism" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" msgid "Printer preset names" @@ -9280,7 +10860,7 @@ msgstr "Namn på förinställda skrivare" msgid "Use 3rd-party print host" msgstr "" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" msgid "Hostname, IP or URL" @@ -9303,7 +10883,7 @@ msgid "Device UI" msgstr "Enhetens gränssnitt" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Ange webbadressen till enhetens användar gränssnitt om den inte är densamma " "som printer värd" @@ -9318,7 +10898,7 @@ msgstr "" "Snapmaker Orca kan ladda upp G-kod filer till en printer värd. Det här fältet " "ska innehålla API nyckeln eller lösenordet som krävs för autentisering." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Skrivarens namn" msgid "HTTPS CA File" @@ -9350,7 +10930,7 @@ msgstr "" "distributionspunkter saknas eller är offline. Man kanske vill aktivera det " "här alternativet för självsignerade certifikat om anslutningen misslyckas." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Namn på förinställningar relaterade till den fysiska skrivaren" msgid "Authorization Type" @@ -9362,21 +10942,22 @@ msgstr "API nyckel" msgid "HTTP digest" msgstr "HTTP sammandrag" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Undvik att korsa väggar" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Undvik väggar vid förflyttning, för att undvika att filament droppar på ytan" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Undvik att korsa väggar - Max omvägslängd" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Maximalt omvägsavstånd för att undvika att korsa vägg: Skrivaren kommer inte " "att omväga om omvägsavståndet är större än detta värde. Omvägs längd kan " @@ -9390,37 +10971,39 @@ msgid "Other layers" msgstr "Andra lager" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Detta är byggplattans temperatur för lager förutom det första. Värdet 0 " "betyder att filamentet inte stöder utskrift på Cool Plate." -msgid "°C" -msgstr "° C" - msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" "Detta är byggplattans temperatur för lager förutom det första. Ett värde på " "0 betyder att filamentet inte stöder utskrift på Engineering Plate." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "" "Detta är byggplattans temperatur för lager förutom det första. Värdet 0 " "betyder att filamentet inte stöder utskrift på High Temp Plate." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "" "Byggplattans temperatur efter det första lagret. 0 betyder att filamentet " "inte stöds på den texturerade PEI-plattan." @@ -9432,66 +11015,72 @@ msgid "Initial layer bed temperature" msgstr "Byggplattans första lager temperatur" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att " "filamentet inte stöder utskrift på Cool Plate." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att " "filamentet inte stöder utskrift på Engineering Plate." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att " "filamentet inte stöder utskrift på High Temp Plate." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "Byggplattans temperatur för första lager 0 betyder att filamentet inte stöds " "på den texturerade PEI-plattan." -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "Byggplattans typ stöds av skrivaren" msgid "Smooth Cool Plate" msgstr "" -msgid "Engineering Plate" -msgstr "Engineering Plate" - msgid "Smooth High Temp Plate" msgstr "" -msgid "Textured Cool Plate" +msgid "Default bed type" +msgstr "" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" msgstr "Första lagrets utskrifts ordning" msgid "Other layers print sequence" -msgstr "Other layers print sequence" +msgstr "" msgid "The number of other layers print sequence" -msgstr "The number of other layers print sequence" +msgstr "" msgid "Other layers filament sequence" -msgstr "Other layers filament sequence" +msgstr "" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Denna G-kod används för varje lager innan Z axis lyfts" msgid "Bottom shell layers" @@ -9500,7 +11089,7 @@ msgstr "Botten skal lager" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Antal solida lager av bottenskalet, detta inkluderar botten lager. När " "tjockleken beräknas av detta värde som är tunnare än bottenskalets tjocklek, " @@ -9513,8 +11102,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "Antal solida botten lager ökar om tjockleken beräknas om bottenskals lager " "är tunnare än detta värde. Detta kan undvikas genom att ha tunnare väggar " @@ -9525,14 +11114,31 @@ msgid "Apply gap fill" msgstr "" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -9544,71 +11150,106 @@ msgstr "" msgid "Nowhere" msgstr "" -msgid "Force cooling for overhang and bridge" -msgstr "Tvinga kylning av överhäng och bridge/bryggor" +msgid "Force cooling for overhangs and bridges" +msgstr "" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Aktivera detta val för att optimisera del kylningens hastighet för överhäng " -"och bridge/bryggor" -msgid "Fan speed for overhang" -msgstr "Fläkthastighet för överhäng" +msgid "Overhangs and external bridges fan speed" +msgstr "" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Tvinga del kylningsfläkten att hålla denna hastighet när utskrift av bridge/" -"bryggor eller överhäng som är större än överhängs graderna skrivs ut. " -"Tvingande kylning för överhäng och bridge/bryggor kan ge bättre kvalitet på " -"dessa delar" -msgid "Cooling overhang threshold" -msgstr "Överhängs kylningens tröskel" +msgid "Overhang cooling activation threshold" +msgstr "" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" -msgstr "" -"Tvinga kylfläkten att vara en specifik hastighet när överhängs graden av " -"objektets del överstiger detta värde. Detta uttrycks som en procentsats som " -"anger hur mycket bredden på linjen utan stöd från det nedre lagret. 0%% " -"betyder tvinga kylning för all yttervägg oavsett överhängs grad." - -msgid "Bridge infill direction" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" +msgid "External bridge infill direction" +msgstr "" + +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Bridging vinkel åsidosättning. 0 betyder att bridging vinkeln beräknas " "automatiskt. Annars kommer den medföljande vinkeln att användas för extern " "bridging. Använd 180° för noll vinkel." -msgid "Bridge density" +msgid "Internal bridge infill direction" msgstr "" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" + +msgid "External bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" + +msgid "Internal bridge density" +msgstr "" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." msgstr "" msgid "Bridge flow ratio" msgstr "Bridge/Brygg flöde" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Minska detta värde något (tex 0.9) för att minska material åtgång för " -"bridges/bryggor, detta för att förbättra kvaliteten" msgid "Internal bridge flow ratio" msgstr "" @@ -9616,7 +11257,11 @@ msgstr "" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9624,15 +11269,117 @@ msgstr "Flödesförhållande för övre ytan" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Denna faktor påverkar mängden material för den övre solida fyllningen. Du " -"kan minska den något för att få en jämn ytfinish." msgid "Bottom surface flow ratio" msgstr "" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" msgid "Precise wall" @@ -9640,17 +11387,16 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "Endast en vägg på topp ytan" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Använd endast en vägg på topp ytan, för att ge mer utrymme till det övre " "ifyllningsmönstret" @@ -9675,7 +11421,7 @@ msgstr "Endast en vägg på första lagret" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" msgid "Extra perimeters on overhangs" @@ -9683,10 +11429,10 @@ msgstr "" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -msgid "Reverse on odd" +msgid "Reverse on even" msgstr "" msgid "Overhang reversal" @@ -9694,7 +11440,7 @@ msgstr "" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " @@ -9705,7 +11451,7 @@ msgid "Reverse only internal perimeters" msgstr "" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9714,9 +11460,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" msgid "Bridge counterbore holes" @@ -9725,9 +11471,9 @@ msgstr "" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" msgid "Partially bridged" @@ -9746,54 +11492,66 @@ msgstr "" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "" - -msgid "Classic mode" -msgstr "" - -msgid "Enable this option to use classic mode" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" msgid "Slow down for overhang" msgstr "Sakta ner vid överhäng" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Aktivera detta val för att sänka hastigheten för olika överhängs grader" msgid "Slow down for curled perimeters" msgstr "" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" msgid "mm/s or %" msgstr "mm/s eller %." -msgid "External" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." msgstr "" -msgid "Speed of bridge and completely overhang wall" -msgstr "Hastighet för bridges/bryggor och hela överhängs väggar" - -msgid "mm/s" -msgstr "mm/s" - msgid "Internal" msgstr "" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" msgid "Brim width" msgstr "Brim bredd" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "Avståndet från modellen till yttersta brim linjen" msgid "Brim type" @@ -9801,7 +11559,7 @@ msgstr "Brim typ" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Detta styr genereringen av brim på modellens yttre och/eller inre sida. Auto " "innebär att brim bredd analyseras och beräknas automatiskt." @@ -9811,13 +11569,13 @@ msgstr "Avstånd mellan brim och modell" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "Mellanrum mellan innersta brim linjen och objektet kan underlätta vid " "borttagande av brim" msgid "Brim ears" -msgstr "" +msgstr "Brätte öron" msgid "Only draw brim over the sharp edges of the model." msgstr "" @@ -9826,8 +11584,8 @@ msgid "Brim ear max angle" msgstr "" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" @@ -9835,27 +11593,36 @@ msgid "Brim ear detection radius" msgstr "" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" -msgid "Compatible machine" -msgstr "Kompatibel maskin" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "uppåt kompatibel maskin" -msgid "Compatible machine condition" -msgstr "Kompatibel maskin status" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Kompatibla process profiler" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" -msgid "Compatible process profiles condition" -msgstr "Kompatibla process profilers status" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" + +msgid "Print sequence, layer by layer or object by object." msgstr "Utskrifts sekvens, lager för lager eller objekt för objekt" msgid "By layer" @@ -9867,7 +11634,7 @@ msgstr "Per objekt" msgid "Intra-layer order" msgstr "" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "" msgid "As object list" @@ -9880,7 +11647,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista " "lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel" @@ -9892,28 +11659,25 @@ msgstr "Normal utskrift" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Standard acceleration för både normal utskrift och förflyttning förrutom " "första lager" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "Standard filament profil" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Standard filament profil vid byte till denna maskinens profil" msgid "Default process profile" msgstr "Standard process profil" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Standard process profil vid byte till denna maskinens profil" msgid "Activate air filtration" -msgstr "Activate air filtration" +msgstr "" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "" @@ -9922,21 +11686,21 @@ msgid "Fan speed" msgstr "Fläkt hastighet" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Hastighet för frånlufts fläkt under utskrift. Denna hastighet kommer att " "åsidosätta hastigheten i filament anpassad g-kod" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "" msgid "No cooling for the first" msgstr "Ingen kylning vid första" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Stoppa alla kylfläktar vid det första valda lager. Kylfläkten ska vara " "stängd vid första lager för att förbättra fästet på byggplattan" @@ -9945,15 +11709,15 @@ msgid "Don't support bridges" msgstr "Ingen support vid bridges/bryggor" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Detta inaktiverar support vid bridges/bryggor för att minska mängden av " "support. Bridges/Bryggor kan vanligtvis skrivas ut utan support om de inte " "är för långa avstånd" -msgid "Thick bridges" -msgstr "Tjocka bridges" +msgid "Thick external bridges" +msgstr "" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -9973,41 +11737,82 @@ msgid "" "using large nozzles." msgstr "" -msgid "Don't filter out small internal bridges (beta)" +msgid "Extra bridge layers (beta)" msgstr "" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" msgid "Disabled" msgstr "" +msgid "External bridge only" +msgstr "" + +msgid "Internal bridge only" +msgstr "" + +msgid "Apply to all" +msgstr "" + +msgid "Filter out small internal bridges" +msgstr "" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" + msgid "Limited filtering" msgstr "" @@ -10029,20 +11834,20 @@ msgstr "" msgid "End G-code" msgstr "Slut G-kod" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Lägg till slut G-kod när utskriften har avslutas" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Mellan objekt G kod" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Infoga G-kod mellan objekt. Denna parameter träder i kraft först när du " "skriver ut dina modeller objekt för objekt." -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Lägg till slut G-kod när utskriften har avslutas med detta filament" msgid "Ensure vertical shell thickness" @@ -10068,24 +11873,24 @@ msgstr "" msgid "Top surface pattern" msgstr "Topp ytans mönster" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "Linjemönster för topp ytans ifyllnad" -msgid "Concentric" -msgstr "Koncentrisk" - -msgid "Rectilinear" -msgstr "Räta linjer" - msgid "Monotonic" msgstr "Monoton" msgid "Monotonic line" msgstr "Monoton linje" +msgid "Rectilinear" +msgstr "Räta linjer" + msgid "Aligned Rectilinear" msgstr "Justerade Rätlinjig" +msgid "Concentric" +msgstr "Koncentrisk" + msgid "Hilbert Curve" msgstr "Hilbert kurvan" @@ -10098,7 +11903,7 @@ msgstr "Octagram Spiral" msgid "Bottom surface pattern" msgstr "Botten ytans mönster" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "Botten ytans ifyllnads linjemönster, inte bridge/brygg ifyllnad" msgid "Internal solid infill pattern" @@ -10135,7 +11940,7 @@ msgid "Small perimeters threshold" msgstr "" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "Detta ställer in tröskelvärdet för liten perimeterlängd. Standardgränsen är " "0mm" @@ -10144,10 +11949,10 @@ msgid "Walls printing order" msgstr "" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10157,15 +11962,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" msgid "Inner/Outer" @@ -10185,7 +11988,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10199,10 +12002,10 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" msgid "Counter clockwise" @@ -10288,10 +12091,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Extruder Färg" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Används endast som visuell hjälp på UI" msgid "Extruder offset" @@ -10301,27 +12107,118 @@ msgid "Flow ratio" msgstr "Flödesförhållande" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Materialets volym kan ha ändrats efter byte mellan smält och kristalliserat " -"tillstånd.Denna inställning ändrar alla inställningar för extruderings " +"tillstånd. Denna inställning ändrar alla inställningar för extruderings " "flödet för detta filament proportionellt i G-koden. Det rekommenderade " "värdet är mellan 0.95 och 1.05. Du kan finjustera detta värde för att få en " "fin flat yta när visst överflöde eller underflöde finns" +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" + msgid "Enable pressure advance" msgstr "Aktivera pressure advance" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." msgstr "" msgid "" @@ -10333,8 +12230,9 @@ msgid "Keep fan always on" msgstr "Behåll alltid fläkten på" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Om den här inställningen aktiveras, kommer en del kylfläkten aldrig stoppas " "och den kommer att åtminstone gå på lägsta hastighet för att minska " @@ -10347,13 +12245,11 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" msgid "Layer time" @@ -10362,7 +12258,7 @@ msgstr "Lager tid" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Del kylfläkten kommer att aktiveras för lager vars beräknade tid är kortare " "än detta värde. Fläkthastigheten interpoleras mellan den lägsta och högsta " @@ -10371,14 +12267,16 @@ msgstr "" msgid "Default color" msgstr "Standardfärg" -msgid "Default filament color" -msgstr "Standard filament färg" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" -msgstr "Filament notes" +msgstr "" msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." +msgstr "" msgid "Required nozzle HRC" msgstr "HRC nozzle krävs" @@ -10390,36 +12288,91 @@ msgstr "" "Minsta HRC för nozzle som krävs för att skriva ut filament. Värdet 0 betyder " "ingen kontroll av munstyckets HRC." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Den här inställningen är volymen filament som kan smältas och extruderas per " "sekund. Utskriftshastigheten begränsas av den maximala volymhastigheten om " "hastigheten är för hög och orimlig. Det här värdet kan inte vara noll." -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "Inmatningstid för filament" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Ladda nytt filament vid byte av filament, endast för statistiska ändamål" msgid "Filament unload time" msgstr "Utmatningstid för filament" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" + +msgid "Tool change time" msgstr "" -"Ladda ur gammalt filament vid byte av filament, endast för statistiska " -"ändamål" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Filament diametern används för att beräkna extruderingen i G-kod, viktigt " "att detta är rätt" @@ -10428,7 +12381,7 @@ msgid "Pellet flow coefficient" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10437,18 +12390,46 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" +msgid "Shrinkage (Z)" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "" @@ -10465,7 +12446,7 @@ msgid "Unloading speed" msgstr "" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" @@ -10480,8 +12461,8 @@ msgid "Delay after unloading" msgstr "" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" @@ -10493,6 +12474,21 @@ msgid "" "Specify desired number of these moves." msgstr "" +msgid "Stamping loading speed" +msgstr "" + +msgid "Speed used for stamping." +msgstr "" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" + msgid "Speed of the first cooling move" msgstr "" @@ -10516,12 +12512,6 @@ msgstr "" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - msgid "Ramming parameters" msgstr "" @@ -10530,80 +12520,82 @@ msgid "" "parameters." msgstr "" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "" msgid "Density" msgstr "Densitet" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "Filament densitet, endast för statistiska ändamål" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Filament material" msgid "Soluble material" msgstr "Lösligt material" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Lösligt material används vanligtvis som utskrifts support och supportets " "gränsyta" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Support material" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Support material används ofta för att skriva ut support och stödja " "gränssnittet" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Mjuknings temperatur" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." -msgstr "" -"The material softens at this temperature, so when the bed temperature is " "equal to or greater than this, it's highly recommended to open the front " -"door and/or remove the upper glass to avoid clogs." +"door and/or remove the upper glass to avoid clogging." +msgstr "" msgid "Price" msgstr "Pris" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Filament pris, endast för statistiska ändamål" msgid "money/kg" @@ -10612,7 +12604,7 @@ msgstr "pris/kg" msgid "Vendor" msgstr "Leverantör" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Försäljare av filament. Endast för visning" msgid "(Undefined)" @@ -10623,7 +12615,7 @@ msgstr "" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" "Vinkeln för sparsam ifyllnads mönster, som styr start- eller huvudriktningen " "för linjer" @@ -10633,13 +12625,7 @@ msgstr "" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." +"of line." msgstr "" msgid "Sparse infill density" @@ -10648,38 +12634,67 @@ msgstr "Sparsam ifyllnads densitet" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "Sparsam ifyllnads mönster" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "Linjemönster för sparsam ifyllnad" -msgid "Grid" -msgstr "Grid" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Linje" -msgid "Cubic" -msgstr "Kubisk" +msgid "Grid" +msgstr "Grid" msgid "Tri-hexagon" msgstr "Tri-hexagon" -msgid "Gyroid" -msgstr "Gyroid" - -msgid "Honeycomb" -msgstr "Honeycomb" +msgid "Cubic" +msgstr "Kubisk" msgid "Adaptive Cubic" msgstr "Adaptiv Cubic" -msgid "3D Honeycomb" -msgstr "3D Honeycomb" +msgid "Quarter Cubic" +msgstr "" msgid "Support Cubic" msgstr "Kubik Support" @@ -10687,9 +12702,53 @@ msgstr "Kubik Support" msgid "Lightning" msgstr "Blixt" +msgid "Honeycomb" +msgstr "Honeycomb" + +msgid "3D Honeycomb" +msgstr "3D Honeycomb" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "" + msgid "Cross Hatch" msgstr "Cross Hatch" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Gyroid" + +msgid "Lateral lattice angle 1" +msgstr "" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Lateral lattice angle 2" +msgstr "" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" msgstr "" @@ -10701,7 +12760,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -10723,7 +12782,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10731,23 +12790,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Acceleration av fyllning av toppytan. Att använda ett lägre värde kan " "förbättra ytkvaliteten" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "Acceleration av yttervägg: ett lägre värde kan förbättra kvaliteten." msgid "" @@ -10756,7 +12815,7 @@ msgid "" msgstr "" msgid "mm/s² or %" -msgstr "mm/s² or %" +msgstr "mm/s² eller %" msgid "" "Acceleration of sparse infill. If the value is expressed as a percentage (e." @@ -10773,7 +12832,7 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Utskrifts acceleration för första lager. Ett lägre värde kan förbättra " "objektets fäste på byggplattan" @@ -10781,7 +12840,7 @@ msgstr "" msgid "Enable accel_to_decel" msgstr "Aktivera accel_to_decel" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klippers max_accel_to_decel kommer att justeras automatiskt" msgid "accel_to_decel" @@ -10789,25 +12848,36 @@ msgstr "accel_to_decel" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Jerk ytterväggar" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Jerk innerväggar" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "" msgid "" @@ -10820,25 +12890,25 @@ msgstr "Första lagerhöjd" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" "Första lagerhöjd. Högre första lager kan förbättra objektets fäste på " "byggplattan" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "" "Hastigheten för det första lagret förutom för solida ifyllnads sektioner" msgid "Initial layer infill" msgstr "Första lager ifyllnad" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "Hastigheten för fasta ifyllnadsdelar av det första lagret" msgid "Initial layer travel speed" msgstr "" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "" msgid "Number of slow layers" @@ -10852,7 +12922,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Nozzel temperatur för första lager" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "Nozzel temperatur för första lager med detta filament" msgid "Full fan speed at layer" @@ -10873,15 +12943,39 @@ msgid "Support interface fan speed" msgstr "" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" + +msgid "Internal bridges fan speed" +msgstr "" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Inställningen gör att verktygshuvudet skakar slumpmässigt vid utskrift av " "väggar så att ytan får ett strävt utseende. Denna inställning styr fuzzy " @@ -10900,8 +12994,8 @@ msgid "Fuzzy skin thickness" msgstr "Fuzzy skin tjocklek" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "Bredd på skakning: Det rekommenderas att hålla denna lägre än den yttre " "vägglinjens bredd" @@ -10910,8 +13004,8 @@ msgid "Fuzzy skin point distance" msgstr "Fuzzy skin punktavstånd" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Den genomsnittliga distansen mellan de slumpmässiga punkter som införts på " "varje linjesegment" @@ -10919,7 +13013,96 @@ msgstr "" msgid "Apply fuzzy skin to first layer" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "" + +msgid "Fuzzy skin noise type" +msgstr "" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" + +msgid "Classic" +msgstr "Klassisk" + +msgid "Perlin" +msgstr "" + +msgid "Billow" +msgstr "" + +msgid "Ridged Multifractal" +msgstr "" + +msgid "Voronoi" +msgstr "" + +msgid "Fuzzy skin feature size" +msgstr "" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" + +msgid "Fuzzy skin noise persistence" +msgstr "" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." msgstr "" msgid "Filter out tiny gaps" @@ -10928,36 +13111,36 @@ msgstr "Filtrera bort små luckor" msgid "Layers and Perimeters" msgstr "Lager och perimetrar" -msgid "Filter out gaps smaller than the threshold specified" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Hastigheten för fyllning av mellanrum. Mellanrum har vanligtvis oregelbunden " "linjebredd och bör skrivas ut långsammare" msgid "Precise Z height" -msgstr "Precise Z height" +msgstr "" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" -"Enable this to get precise z height of object after slicing. It will get the " -"precise object height by fine-tuning the layer heights of the last few " -"layers. Note that this is an experimental parameter." msgid "Arc fitting" msgstr "Arc passning" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -10967,7 +13150,8 @@ msgstr "" msgid "Add line number" msgstr "Lägg till rad nummer" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Aktivera detta för att lägga till rad nummer(Nx) i början av varje G-kod rad" @@ -10976,7 +13160,7 @@ msgstr "Skanna första lager" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Aktivera detta för att låta kameran i skrivaren kontrollera kvaliteten på " "det första lager" @@ -10986,7 +13170,7 @@ msgstr "Nozzel typ" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Nozzelns metalliska material avgör munstyckets nötningsbeständighet och " "vilken typ av filament som kan skrivas ut" @@ -11000,6 +13184,9 @@ msgstr "Härdat stål" msgid "Stainless steel" msgstr "Rostfritt stål" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Mässing" @@ -11019,7 +13206,7 @@ msgstr "HRC" msgid "Printer structure" msgstr "Printerns struktur" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Den fysiska utformningen och komponenterna i en utskriftsenhet" msgid "CoreXY" @@ -11052,10 +13239,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" @@ -11079,7 +13266,7 @@ msgstr "" msgid "Time cost" msgstr "" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "" msgid "money/h" @@ -11104,7 +13291,7 @@ msgstr "" msgid "G-code flavor" msgstr "G-kod smak" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "Vilken typ av G-kod är skrivaren kompatibel med" msgid "Klipper" @@ -11113,20 +13300,20 @@ msgstr "" msgid "Pellet Modded Printer" msgstr "" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" msgid "Support multi bed types" msgstr "" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" msgid "Label objects" msgstr "" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11135,7 +13322,7 @@ msgstr "" msgid "Exclude objects" msgstr "Exkludera objekt" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "" msgid "Verbose G-code" @@ -11158,6 +13345,128 @@ msgstr "" "tillsammans för att minska tiden. Väggar skrivs fortfarande ut med vald " "lagerhöjd." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "Filamentet är avsett för sparsam ifyllnad." @@ -11184,40 +13493,44 @@ msgstr "" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "Hastighet för sparsam ifyllnad" +msgid "Inherits profile" +msgstr "" + +msgid "Name of parent profile." +msgstr "" + msgid "Interface shells" -msgstr "Interface shells" +msgstr "" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" msgid "Maximum width of a segmented region" msgstr "Maximal bredd för en segmenterad region" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Maximum width of a segmented region. A value of 0 disables this feature." msgid "Interlocking depth of a segmented region" msgstr "Sammanhängande djup i en segmenterad region" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Sammankopplingsdjup för en segmenterad region. Noll inaktiverar denna " -"funktion." msgid "Use beam interlocking" msgstr "" @@ -11290,7 +13603,7 @@ msgstr "Alla solida lager" msgid "Ironing Pattern" msgstr "Mönster för strykning" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "" msgid "Ironing flow" @@ -11298,7 +13611,7 @@ msgstr "Strykningsflöde" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Denna mängd av material kommer att extruderas under strykningen. Den är " "relativ till flödet av normal lagerhöjd. För högt värde resulterar i över " @@ -11307,32 +13620,47 @@ msgstr "" msgid "Ironing line spacing" msgstr "Strykning linjens mellanrum" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Avståndet mellan linjerna när strykning utförs" +msgid "Ironing inset" +msgstr "" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" + msgid "Ironing speed" msgstr "Stryknings hastighet" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Utskrifts hastighet för strykning" -msgid "Ironing angle" +msgid "Ironing angle offset" msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "The angle of ironing lines offset from the top surface." msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "Denna G-kod infogas vid varje lagerbyte efter lyft av Z axis" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Tyst läge" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Om maskinen stöder tyst läge där maskinen använder lägre acceleration för " "att skriva ut" @@ -11345,23 +13673,23 @@ msgstr "Maskin begränsningar" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Denna G-kod kommer att användas som kod för att pausa utskriften. Användare " "kan infoga paus G-kod i G-kod visaren." -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Denna G-kod kommer att användas som en anpassad kod." msgid "Small area flow compensation (beta)" msgstr "" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "" msgid "Flow Compensation Model" @@ -11370,8 +13698,8 @@ msgstr "" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" @@ -11417,7 +13745,7 @@ msgid "Maximum acceleration of the Y axis" msgstr "Max acceleration på Y-axis" msgid "Maximum acceleration of the Z axis" -msgstr "Max acceleration på Z-axis" +msgstr "Max acceleration på Z axis" msgid "Maximum acceleration of the E axis" msgstr "Max acceleration på E-axis" @@ -11441,11 +13769,20 @@ msgid "Maximum jerk of the Y axis" msgstr "Max jerk på Y-axis" msgid "Maximum jerk of the Z axis" -msgstr "Max jerk på Z-axis" +msgstr "Max jerk på Z axis" msgid "Maximum jerk of the E axis" msgstr "Max jerk på E-axis" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Min hastighet för extrudering" @@ -11473,25 +13810,41 @@ msgstr "Max acceleration för retraktion (M204 R)" msgid "Maximum acceleration for travel" msgstr "Max acceleration för förflyttning" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" + +msgid "Resonance avoidance" msgstr "" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Min" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"Del kylfläktens hastighet kan ökas när automatisk kylning är aktiverad. " -"Detta är max hastighets begränsning för en del kylfläkt" msgid "Max" msgstr "Max" -msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +msgid "Maximum speed of resonance avoidance." +msgstr "" + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"Del kylfläktens hastighet kan ökas när automatisk kylning är aktiverad. " +"Detta är max hastighets begränsning för en del kylfläkt" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Högsta utskrivbara lagerhöjd för extrudern: detta används för att begränsa " -"den maximala lagerhöjden när adaptiv lagerhöjd är aktiverad" msgid "Extrusion rate smoothing" msgstr "" @@ -11502,47 +13855,54 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -msgid "mm³/s²" -msgstr "" - msgid "Smoothing segment length" msgstr "" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "Min hastighet för del kylfläkten" msgid "" @@ -11553,29 +13913,21 @@ msgid "" "command: M106 P2 S(0-255)" msgstr "" -msgid "Min" -msgstr "Min" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Den lägsta utskrivbara lagerhöjden för extrudering. Används tp begränsas den " -"lägsta lagerhöjden när adaptiv lagerhöjd aktiveras" msgid "Min print speed" msgstr "Min utskrifts hastighet" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -msgid "Nozzle diameter" -msgstr "Nozzel diameter" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Diametern på nozzeln" msgid "Configuration notes" @@ -11599,7 +13951,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Nozzle volym" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Volymen av nozzlen mellan skäraren och nozzlens ände" msgid "Cooling tube position" @@ -11637,7 +13989,7 @@ msgstr "" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" @@ -11653,17 +14005,22 @@ msgstr "Minska ifyllnads retraktionen" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Dra inte tillbaka när förflyttningen är helt i ett utfyllnadsområde. Det " "betyder att läckage av filament inte kan ses. Detta kan minska tiderna för " "indragning för komplexa modeller och spara utskriftstid, men gör beredning " "och generering av G-kod långsammare." +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" + msgid "Filename format" msgstr "Filnamns format" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "Användaren kan bestämma projekt namn när den ska exporteras" msgid "Make overhangs printable" @@ -11686,12 +14043,9 @@ msgstr "" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "Upptäck överhängs vägg" @@ -11704,15 +14058,18 @@ msgstr "" "hastigheter för att skriva ut. Vid 100%% överhäng, bridge/brygg hastighet " "användas." +msgid "Filament to print walls." +msgstr "" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Hastighet för inre vägg" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Antal väggar för varje lager" msgid "Alternate extra wall" @@ -11720,10 +14077,10 @@ msgstr "" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11737,36 +14094,45 @@ msgid "" "environment variables." msgstr "" +msgid "Printer type" +msgstr "" + +msgid "Type of the printer." +msgstr "" + msgid "Printer notes" -msgstr "Printer notes" +msgstr "" msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." +msgstr "" + +msgid "Printer variant" +msgstr "" msgid "Raft contact Z distance" msgstr "Raft kontakt Z avstånd" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" "Där finns Z mellanrum mellan ett objekt och en raft. Detta ignoreras för " "lösliga gränssnitt" msgid "Raft expansion" -msgstr "Raft expansion" +msgstr "" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "Öka alla raft lager i XY planet" msgid "Initial layer density" msgstr "Första lager densitet" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "Densiteten av första raft eller support lager" msgid "Initial layer expansion" msgstr "Första lager expansion" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Öka första raft eller support lager för att förbättra fäste emot byggplattan" @@ -11775,15 +14141,15 @@ msgstr "Raft lager" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Objekt kommer att höjas med detta antal support lager. Använd denna funktion " "för att undvika warping vid utskrift av ABS" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "G-kods vägen genereras efter förenkling av modellens konturer för att " "undvika för många punkter och G-kod linjer. Mindre värden betyder högre " @@ -11794,7 +14160,7 @@ msgstr "Förflyttningsavståndets gräns" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Aktivera endast retraktion när förflyttnings sträckan är längre än denna " "gräns" @@ -11803,7 +14169,7 @@ msgid "Retract amount before wipe" msgstr "Retraktions mängd innan wipe" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" "Detta är längden av snabb retraktion före en wipe, i förhållande till " "retraktions längden" @@ -11811,7 +14177,7 @@ msgstr "" msgid "Retract when change layer" msgstr "Retraktera vid lager byte" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Tvinga retraktion vid lager byte" msgid "Retraction Length" @@ -11819,69 +14185,70 @@ msgstr "Retraktions längd" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"En del av materialet i extrudern dras tillbaka för att undvika dropp under " -"långa förflyttningar. Sätt på 0 för att inaktivera retraktion" -msgid "Long retraction when cut(experimental)" -msgstr "Long retraction when cut (experimental)" +msgid "Long retraction when cut (beta)" +msgstr "" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Experimental feature: Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " -"significantly, it may also raise the risk of nozzle clogs or other printing " -"problems." msgid "Retraction distance when cut" -msgstr "Retraction distance when cut" +msgstr "" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Experimental feature. Retraction length before cutting off during filament " -"change" -msgid "Z hop when retract" -msgstr "Z hopp vid retraktion" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "När det är en retraktion lyfts nozzel en aning för att skapa ett spel mellan " "nozzel och utskriften. Detta förhindrar att nozzel träffar utskriften när " "den förflyttas. Att använda spirallinjer för att lyfta z kan förhindra " "strängning" -msgid "Z hop lower boundary" -msgstr "Z hopp nedre gräns" +msgid "Z-hop lower boundary" +msgstr "Z-hopp nedre gräns" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" -"Z hop kommer endast att träda i kraft när Z är över detta värde och är under " +"Z-hop kommer endast att träda i kraft när Z är över detta värde och är under " "parametern: \"Övre gräns för Z-hopp\"" -msgid "Z hop upper boundary" -msgstr "Z hopp övre gräns" +msgid "Z-hop upper boundary" +msgstr "Z-hopp övre gräns" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" -"Om detta värde är positivt kommer Z hop endast att träda i kraft när Z är " -"över parametern: \"Z hop nedre gräns\" och är under detta värde" +"Om detta värde är positivt kommer Z-hop endast att träda i kraft när Z är " +"över parametern: \"Z-hop nedre gräns\" och är under detta värde" -msgid "Z hop type" +msgid "Z-hop type" +msgstr "" + +msgid "Type of Z-hop." msgstr "" msgid "Slope" @@ -11894,8 +14261,8 @@ msgid "Traveling angle" msgstr "" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -11918,7 +14285,7 @@ msgid "On surfaces" msgstr "" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" @@ -11934,6 +14301,18 @@ msgstr "" msgid "Top and Bottom" msgstr "" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Extra längd vid omstart" @@ -11950,19 +14329,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Retraktions hastighet" -msgid "Speed of retractions" -msgstr "Hastighet för retraktion" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Åter retraktions hastighet" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Laddnings hastighet för filamentet in i extrudern efter en retraktion; om du " -"ställer in detta till 0 betyder det att det blir samma hastighet som " -"retraktionen" msgid "Use firmware retraction" msgstr "Använd firmware retraktion" @@ -11979,13 +14355,13 @@ msgid "Disable set remaining print time" msgstr "" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" msgid "Seam position" msgstr "Söm position" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Utskriftens start position för varje del av yttre väggen" msgid "Nearest" @@ -11994,6 +14370,9 @@ msgstr "Närmaste" msgid "Aligned" msgstr "Linjerad" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "Tillbaka" @@ -12023,20 +14402,17 @@ msgstr "" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Use scarf joint to minimize seam visibility and increase seam strength." msgid "Conditional scarf joint" -msgstr "Conditional scarf joint" +msgstr "" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Apply scarf joints only to smooth perimeters where traditional seams do not " -"conceal the seams at sharp corners effectively." msgid "Conditional angle threshold" -msgstr "Conditional angle threshold" +msgstr "" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12063,13 +14439,13 @@ msgstr "" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" msgid "Scarf joint flow ratio" @@ -12079,52 +14455,48 @@ msgid "This factor affects the amount of material for scarf joints." msgstr "" msgid "Scarf start height" -msgstr "Scarf start height" +msgstr "" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the " -"current layer height. The default value for this parameter is 0." msgid "Scarf around entire wall" -msgstr "Scarf around entire wall" +msgstr "" msgid "The scarf extends to the entire length of the wall." -msgstr "The scarf extends to the entire length of the wall." +msgstr "" msgid "Scarf length" -msgstr "Scarf length" +msgstr "" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Length of the scarf. Setting this parameter to zero effectively disables the " -"scarf." msgid "Scarf steps" -msgstr "Scarf steps" +msgstr "" msgid "Minimum number of segments of each scarf." -msgstr "Minimum number of segments of each scarf." +msgstr "" msgid "Scarf joint for inner walls" -msgstr "Scarf joint for inner walls" +msgstr "" msgid "Use scarf joint for inner walls as well." -msgstr "Use scarf joint for inner walls as well." +msgstr "" msgid "Role base wipe speed" msgstr "" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" msgid "Wipe on loops" @@ -12139,15 +14511,15 @@ msgid "Wipe before external loop" msgstr "" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" msgid "Wipe speed" @@ -12155,9 +14527,9 @@ msgstr "Hastighet för avtorkning" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "Torkhastigheten bestäms av den hastighetsinställning som anges i denna " "konfiguration. Om värdet uttrycks i procent (t.ex. 80%), kommer det att " @@ -12167,42 +14539,65 @@ msgstr "" msgid "Skirt distance" msgstr "Skirt avstånd" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "Avståndet ifrån skirt till brim eller objektet" +msgid "Skirt start point" +msgstr "" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" + msgid "Skirt height" msgstr "Skirt höjd" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "Antal skirt lager: vanligtvis bara en" +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" + msgid "Draft shield" msgstr "" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -msgid "Limited" +msgid "Enabled" msgstr "" -msgid "Enabled" +msgid "Skirt type" +msgstr "" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" + +msgid "Per object" msgstr "" msgid "Skirt loops" msgstr "Skirt varv" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "Antal skirt varv. 0 betyder att skirt är inaktiverad" msgid "Skirt speed" @@ -12218,13 +14613,16 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Utskriftshastigheten i exporterad G-kod kommer att saktas ner när den " "beräknade lager tiden är kortare än detta värde för att få bättre kylning " @@ -12235,47 +14633,71 @@ msgstr "Min sparsam ifyllnads gräns" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Sparsam ifyllnads ytor som är mindre än detta gränsvärde ersätts med inre " "solid ifyllnad" +msgid "Solid infill" +msgstr "" + +msgid "Filament to print solid infill." +msgstr "" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "Hastighet för inre solid ifyllnad, förrutom topp och botten ytorna" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Möjliggör spiral bildning, vilket jämnar ut Z-rörelserna på den yttre " "konturen och förvandlar en solid modell till en enkelväggig utskrift med " "solida bottenlager. Den slutgiltligt genererade modellen har ingen söm" msgid "Smooth Spiral" -msgstr "Smooth Spiral" +msgstr "" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" msgid "Max XY Smoothing" -msgstr "Max XY Smoothing" - -msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" msgstr "" + +#, no-c-format, no-boost-format +msgid "" "Maximum distance to move points in XY to try to achieve a smooth spiral. If " -"expressed as a %, it will be computed over nozzle diameter" +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" + +msgid "Spiral starting flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12302,19 +14724,44 @@ msgstr "Traditionell" msgid "Temperature variation" msgstr "Temperatur variation" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "Starta G-kod" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Starta G-kod när utskrift startar" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Starta G-kod när utskrift startar med detta filament" msgid "Single Extruder Multi Material" msgstr "" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "" msgid "Manual Filament Change" @@ -12331,7 +14778,7 @@ msgstr "" msgid "Purge in prime tower" msgstr "" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "" msgid "Enable filament ramming" @@ -12341,8 +14788,8 @@ msgid "No sparse layers (beta)" msgstr "" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12403,32 +14850,38 @@ msgid "Enable support generation." msgstr "Aktivera support generering." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"normal(auto) och tree(auto) används för att generera support automatiskt. Om " -"normal(manual) eller tree(manual) väljs, genereras endast support " +"normal (auto) och tree (auto) används för att generera support automatiskt. " +"Om normal (manual) eller tree (manual) väljs, genereras endast support " "förstärkare." -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "normal (auto)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "träd(auto)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "normal (manuell)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "tree (manuell)" -msgid "Support/object xy distance" -msgstr "Support/objekt xy distans" +msgid "Support/object XY distance" +msgstr "Support/objekt XY distans" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "XY avstånd mellan objektet och support" +msgid "Support/object first layer gap" +msgstr "" + +msgid "XY separation between an object and its support at the first layer." +msgstr "" + msgid "Pattern angle" msgstr "Mönster vinkel" @@ -12440,7 +14893,7 @@ msgstr "" msgid "On build plate only" msgstr "Endast på byggplattan" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Inställningen skapar bara support som utgår ifrån byggplattan" msgid "Support critical regions only" @@ -12453,23 +14906,23 @@ msgstr "" "Skapa endast support för kritiska regioner inklusive skarp svans, " "utskjutande detaljer etc." -msgid "Remove small overhangs" -msgstr "Ta bort små överhäng" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Ta bort små överhäng som eventuellt inte behöver stöd." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Topp Z-distans" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "" "Detta bestämmer Z-avståndet mellan det övre support gränssnittet och objektet" msgid "Bottom Z distance" msgstr "Nedre Z-avstånd" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "Z-gapet mellan botten support och objektets anläggningsyta" msgid "Support/raft base" @@ -12477,7 +14930,7 @@ msgstr "Support/raft bas" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Filament för att skriva ut support och rafts. ”Standard” betyder ingen " "specifik filament för support, och nuvarande filament används" @@ -12510,7 +14963,7 @@ msgstr "Gränssnitt för support/raft" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament för att skriva ut supportens anläggningsyta. ” Standard” betyder " "ingen specifik filament för supportens anläggningsyta, och nuvarande " @@ -12519,13 +14972,13 @@ msgstr "" msgid "Top interface layers" msgstr "Översta gränssnitts lager" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Antal topp gränssnitts lager" msgid "Bottom interface layers" msgstr "Botten gränssnitts lager" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Antal nedre gränsyte skikt" msgid "Same as top" @@ -12534,23 +14987,25 @@ msgstr "Samma som toppen" msgid "Top interface spacing" msgstr "Topp gränssnitts avstånd" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Avstånd mellan gränssnitts linjer. 0 betyder solid gränssnitt" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "Botten gränssnitts mellanrum" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Mellanrummet på botten gränssnittets linjer. 0 betyder solid gränssnitt" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Support gränssnittets hastighet" msgid "Base pattern" msgstr "Botten mönster" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Supportens linje mönster" msgid "Rectilinear grid" @@ -12565,7 +15020,7 @@ msgstr "Gränssnitts mönster" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt " "(material) support gränssnittet är Räta medan standardmönstret för " @@ -12577,17 +15032,17 @@ msgstr "Rätlinjig sammanflätning" msgid "Base pattern spacing" msgstr "Basens mönster mellanrum" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Mellanrum mellan support linjer" msgid "Normal Support expansion" msgstr "Normal support expansion" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "" "Expandera (+) eller krymp (-) det horisontella spännvidden för normalt stöd" -msgid "Speed of support" +msgid "Speed of support." msgstr "Support hastighet" msgid "" @@ -12600,9 +15055,15 @@ msgid "" "overhangs." msgstr "" +msgid "Default (Grid/Organic)" +msgstr "" + msgid "Snug" msgstr "Tight" +msgid "Organic" +msgstr "" + msgid "Tree Slim" msgstr "Tree Slim" @@ -12612,15 +15073,12 @@ msgstr "Tree Stark" msgid "Tree Hybrid" msgstr "Tree Hybrid" -msgid "Organic" -msgstr "" - msgid "Independent support layer height" msgstr "Oberoende support lagerhöjd" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Support lager använder lagerhöjd oberoende av objekt lager. Detta för att " @@ -12635,12 +15093,21 @@ msgid "" "threshold." msgstr "Support skapas för överhäng vars sluttning är under denna gräns." +msgid "Threshold overlap" +msgstr "" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "Tree support grenarnas vinkel" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Inställningen bestämmer max överhängs vinkel som grenarna i tree support " @@ -12677,26 +15144,18 @@ msgid "" "needed." msgstr "" -msgid "Adaptive layer height" -msgstr "Adaptiv lagerhöjd" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" - msgid "Auto brim width" msgstr "" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" msgid "Tree support brim width" msgstr "Tree supportens brim bredd" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "" msgid "Tip Diameter" @@ -12724,61 +15183,89 @@ msgid "" "support." msgstr "" -msgid "Branch Diameter with double walls" -msgstr "" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" - msgid "Support wall loops" msgstr "Vägg support" -msgid "This setting specify the count of walls around support" -msgstr "Denna inställning anger antalet väggar runt supporten" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" msgid "Tree support with infill" msgstr "Tree support med ifyllnad" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Inställningen bestämmer om det ska läggas till ifyllnad i stora hålrum av " "tree support" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" msgid "Chamber temperature" msgstr "Kammarens temperatur" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on. At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials, the actual chamber temperature should not " -"be high to avoid clogs, so 0 (turned off) is highly recommended." -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "Nozzel temperatur efter första lager" msgid "Detect thin wall" @@ -12786,20 +15273,20 @@ msgstr "Upptäck tunna väggar" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "Upptäck tunna väggar som inte kan ha två linjer och använder en linje för " "att skrivas ut. Utskrifts kvaliteten begränsas efter som det inte är en " "sluten slinga" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "G-koden sätts in vid filament byte, inklusive T kommando som aktiverar " "verktygs byte" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "" msgid "" @@ -12807,7 +15294,7 @@ msgid "" "the nozzle diameter." msgstr "" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Hastighet för solida topp ytors ifyllnad" msgid "Top shell layers" @@ -12816,7 +15303,7 @@ msgstr "Övre skal lager" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Antal solida topp lager på topp skal, inkluderar topp ytans lager. När " "tjockleken kalkyleras av detta värde och det är tunnare än topp skalets " @@ -12832,23 +15319,44 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Antal solida övre lager ökas när tjockleken kalkyleras och övre skalet är " "tunnare än detta värde. Detta kan undvika att ha för tunt skal när " "lagerhöjden är liten. 0 betyder att den här inställningen är inaktiverad och " "tjockleken på det övre skalet bestäms av de övre skal lagerna" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Förflyttnings hastighet" msgid "Wipe while retracting" msgstr "Avskrapa medans retraktering" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Detta flyttarnozzeln längs den sista extruderingsbanan när det retrakterar " "för att rengöra eventuellt läckt material på nozzeln. Detta kan minimera " @@ -12858,12 +15366,11 @@ msgid "Wipe Distance" msgstr "Avskrapnings avstånd" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -12878,6 +15385,12 @@ msgstr "" "stabilisera kammartrycket inuti munstycket för att undvika utseendefel vid " "utskrift av objekt." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Rensnings volym" @@ -12897,13 +15410,18 @@ msgstr "Prime volym (volymen av ut pressat material)" msgid "The volume of material to prime extruder on tower." msgstr "Material volymen att (pressa ut) genom extrudern på tornet." -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "Prime tornets bredd" msgid "Wipe tower rotation angle" msgstr "" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "" + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." msgstr "" msgid "Stabilization cone apex angle" @@ -12914,12 +15432,6 @@ msgid "" "Larger angle means wider base." msgstr "" -msgid "Wipe tower purge lines spacing" -msgstr "" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "" - msgid "Maximum wipe tower print speed" msgstr "" @@ -12937,7 +15449,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -12945,7 +15457,37 @@ msgid "" "regardless of this setting." msgstr "" -msgid "Wipe tower extruder" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." msgstr "" msgid "" @@ -12962,6 +15504,18 @@ msgid "" "volumes below." msgstr "" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -12984,8 +15538,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "Det här objektet används för att rensa nozzeln efter ett filamentbyte för " "att spara filament och minska utskriftstiden. Färgerna i objekten kommer att " @@ -12998,13 +15552,39 @@ msgstr "" msgid "Maximal distance between supports on sparse infill sections." msgstr "" +msgid "Wipe tower purge lines spacing" +msgstr "" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "" + +msgid "Extra flow for purging" +msgstr "" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" + +msgid "Idle temperature" +msgstr "" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" + msgid "X-Y hole compensation" msgstr "X-Y håls kompensation" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Objektets hål kommer att krympa eller öka i XY planet med valt värde. " "Positivt värde ökar och negativt värde minskar hålets storlek. Denna " @@ -13014,11 +15594,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "X-Y kontur kompenstation" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Objektets kontur kommer att krympa eller öka i XY planet med konfigurerat " "värde. Positivt värde ökar och negativt värde minskar konturens storlek. " @@ -13042,7 +15623,7 @@ msgstr "" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13066,31 +15647,28 @@ msgstr "" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" msgid "Use relative E distances" msgstr "Använd relativa E avstånd" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Den klassiska vägg generatorn producerar väggar med konstant extruderings " "bredd och för mycket tunna områden används gap-fill. Arachne-motorn " "producerar väggar med variabel extruderings bredd." -msgid "Classic" -msgstr "Klassisk" - msgid "Arachne" msgstr "Arachne" @@ -13100,7 +15678,7 @@ msgstr "Längd för vägg övergång" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Vid övergång mellan olika antal väggar när delen blir tunnare, tilldelas ett " "visst utrymme för att dela eller sammanfoga väggsegmenten. Det uttrycks i " @@ -13116,7 +15694,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Förhindra övergång fram och tillbaka mellan en extra vägg och en mindre. " "Denna marginal utökar intervallet av extruderingsbredder som följer till " @@ -13134,7 +15712,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "När man skapar övergångar mellan jämna och udda antal väggar. En kil form " "med en vinkel som är större än den här inställningen kommer inte att ha " @@ -13148,7 +15726,7 @@ msgstr "Antal vägg fördelningar" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Antalet väggar, räknat från mitten, över vilka variationen ska spridas. " "Lägre värden innebär att de yttre väggarna inte ändras i bredd." @@ -13158,14 +15736,10 @@ msgstr "Minsta funktions storlek" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minsta tjocklek på tunna funktioner. Modellfunktioner som är tunnare än " -"detta värde skrivs inte ut, medan funktioner som är tjockare än minsta " -"funktionsstorlek kommer att utvidgas till minsta väggbredd. Det uttrycks som " -"en procentandel över nozzelns diameter" msgid "Minimum wall length" msgstr "" @@ -13175,9 +15749,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" @@ -13197,7 +15771,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Bredden på den vägg som ska ersätta tunna element (enligt minsta storlek för " "element) i modellen. Om den minsta väggbredden är tunnare än tjockleken på " @@ -13208,9 +15782,9 @@ msgid "Detect narrow internal solid infill" msgstr "Upptäck tight inre solid ifyllnad" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om " "aktiverat kommer det koncentriska mönstret att användas för området för att " @@ -13229,27 +15803,148 @@ msgstr "för stor linjebredd " msgid " not in range " msgstr " inte inom intervallet " +#, fuzzy +msgid "Export 3MF" +msgstr "Exportera 3mf" + +#, fuzzy +msgid "Export project as 3MF." +msgstr "Exportera projekt som 3MF." + +msgid "Export slicing data" +msgstr "Exportera beredningsdata" + +msgid "Export slicing data to a folder." +msgstr "Exportera beredningsdata till en mapp" + +msgid "Load slicing data" +msgstr "Ladda berednings data" + +msgid "Load cached slicing data from directory." +msgstr "Ladda cachad berednings data från katalogen" + +msgid "Export STL" +msgstr "Exportera STL" + +msgid "Export the objects as single STL." +msgstr "" + +msgid "Export multiple STLs" +msgstr "" + +msgid "Export the objects as multiple STLs to directory." +msgstr "" + +msgid "Slice" +msgstr "Bered" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Bered plattorna: 0-alla plattor, i-platta i, andra-ogiltiga" + +msgid "Show command help." +msgstr "Visa kommandohjälp." + +msgid "UpToDate" +msgstr "Aktuell" + +msgid "Update the config values of 3MF to latest." +msgstr "Uppdatera konfigurations värdena i 3MF till det senaste." + +msgid "downward machines check" +msgstr "" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "Ladda standard filament" + +msgid "Load first filament as default for those not loaded." +msgstr "Ladda första filamentet som standard för de som inte laddats" + msgid "Minimum save" msgstr "" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "" +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "max antal trianglar per platta för beredning" + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "Max berednings tid per platta i sekunder" + msgid "No check" msgstr "Ingen kontroll" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Utför inga giltighets kontroller, t.ex. kontroll av konflikter mellan G-kod " "och banor." +msgid "Normative check" +msgstr "Normativ kontroll" + +msgid "Check the normative items." +msgstr "Kontrollera de normativa objekten." + +msgid "Output Model Info" +msgstr "Mata ut modell information" + +msgid "Output the model's information." +msgstr "Mata ut modellens information." + +msgid "Export Settings" +msgstr "Exportera inställningar" + +msgid "Export settings to a file." +msgstr "Exportera inställningar till en fil." + +msgid "Send progress to pipe" +msgstr "Skicka framsteg till röret (SLA)" + +msgid "Send progress to pipe." +msgstr "Skicka framsteg till röret (SLA)" + +msgid "Arrange Options" +msgstr "Placera Val" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Placera val: 0-inaktivera, 1-aktivera, andra-auto" + +msgid "Repetition count" +msgstr "Antal upprepningar" + +msgid "Repetition count of the whole model." +msgstr "Antal upprepningar av hela modellen" + msgid "Ensure on bed" msgstr "" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + +msgid "Convert Unit" +msgstr "Konvertera enhet" + +msgid "Convert the units of model." +msgstr "Konvertera modellens enheter" + msgid "Orient Options" msgstr "" @@ -13259,12 +15954,82 @@ msgstr "" msgid "Rotation angle around the Z axis in degrees." msgstr "" +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "" msgid "Rotation angle around the Y axis in degrees." msgstr "" +msgid "Scale the model by a float factor." +msgstr "Skala modellen med en plus faktor" + +msgid "Load General Settings" +msgstr "Ladda allmänna inställningar" + +msgid "Load process/machine settings from the specified file." +msgstr "Ladda process/maskin inställningar ifrån vald fil" + +msgid "Load Filament Settings" +msgstr "Ladda filament inställningar" + +msgid "Load filament settings from the specified file list." +msgstr "Ladda filament inställningar ifrån vald fil" + +msgid "Skip Objects" +msgstr "Hoppa över objekt" + +msgid "Skip some objects in this print." +msgstr "Hoppa över vissa objekt i denna utskrift" + +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list." +msgstr "" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"ladda aktuella process/maskin inställningar från angiven fil vid användning " +"av aktuella" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "" + +msgid "Load assemble object list from config file." +msgstr "" + msgid "Data directory" msgstr "" @@ -13274,34 +16039,126 @@ msgid "" "storage." msgstr "" -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Mata ut katalog" + +msgid "Output directory for the exported files." +msgstr "Mata ut katalogen för exporterade filer." + +msgid "Debug level" +msgstr "Felsökningsnivå" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" +"spåra\n" + +msgid "Enable timelapse for print" msgstr "" -msgid "Load custom gcode from json" +msgid "If enabled, this slicing will be considered using timelapse." msgstr "" -msgid "Current z-hop" +msgid "Load custom G-code" msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Load custom G-code from json." +msgstr "" + +msgid "Load filament IDs" +msgstr "" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" + +msgid "Allow rotation when arranging" +msgstr "" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" + +msgid "Skip modified G-code in 3MF" +msgstr "" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "" + +msgid "MakerLab name to generate this 3MF." +msgstr "" + +msgid "MakerLab version" +msgstr "" + +msgid "MakerLab version to generate this 3MF." +msgstr "" + +msgid "Metadata name list" +msgstr "" + +msgid "Metadata name list added into 3MF." +msgstr "" + +msgid "Metadata value list" +msgstr "" + +msgid "Metadata value list added into 3MF." +msgstr "" + +msgid "Allow 3MF with newer version to be sliced" +msgstr "" + +msgid "Allow 3MF with newer version to be sliced." +msgstr "" + +msgid "Current Z-hop" +msgstr "" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "" + +msgid "Absolute E position" +msgstr "" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" msgid "Current extruder" @@ -13343,7 +16200,14 @@ msgstr "" msgid "Is extruder used?" msgstr "" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "" + +msgid "Has single extruder MM priming" +msgstr "" + +msgid "Are the extra multi-material priming regions used in this print?" msgstr "" msgid "Volume per extruder" @@ -13352,10 +16216,10 @@ msgstr "" msgid "Total filament volume extruded per extruder during the entire print." msgstr "" -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "" msgid "Total volume" @@ -13405,7 +16269,7 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" @@ -13415,11 +16279,11 @@ msgid "Source filename of the first object, without extension." msgstr "" msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" @@ -13464,6 +16328,9 @@ msgstr "" msgid "Minute" msgstr "" +msgid "Second" +msgstr "Andra" + msgid "Print preset name" msgstr "" @@ -13490,13 +16357,21 @@ msgstr "" msgid "Name of the physical printer used for slicing." msgstr "" +msgid "Number of extruders" +msgstr "" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" + msgid "Layer number" msgstr "" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "" -msgid "Layer z" +msgid "Layer Z" msgstr "" msgid "" @@ -13504,7 +16379,7 @@ msgid "" "layer." msgstr "" -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "" msgid "Height of the last layer above the print bed." @@ -13531,9 +16406,6 @@ msgstr "Skapa ifyllnadens verktygsbana" msgid "Detect overhangs for auto-lift" msgstr "Identifiera överhäng för automatisk lyftning" -msgid "Generating support" -msgstr "Skapa support" - msgid "Checking support necessity" msgstr "Kontrollera supportens nödvändighet" @@ -13554,6 +16426,9 @@ msgstr "" "Det verkar som om objektet %s har %s. Vänligen orientera om objektet eller " "aktivera supportgenerering." +msgid "Generating support" +msgstr "Skapa support" + msgid "Optimizing toolpath" msgstr "Optimerar verktygsbanan" @@ -13570,66 +16445,47 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Ett objekts XY-storleks kompensation kommer inte att användas eftersom den " "är också färglagd.\n" "XY-storlekskompensation kan inte kombineras med färgläggning." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Support: generera verktygsbana vid lager %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Support: upptäck överhäng" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Support: generera kontaktpunkter" -msgid "Support: propagate branches" -msgstr "Support: föröka grenar" +msgid "Loading of a model file failed." +msgstr "Laddning av modell filen misslyckades." -msgid "Support: draw polygons" -msgstr "Support: rita polygoner" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Support: generera verktygsbana" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Support: generera polygoner vid lager %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Support: åtgärda hål vid lager %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Support: föröka grenar vid lager %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Den medföljande filen kunde inte läsas eftersom den är tom." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" "Okänt filformat: indata filen måste ha tillägget .stl, .obj eller .amf(.xml)." -msgid "Loading of a model file failed." -msgstr "Laddning av modell filen misslyckades." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Den medföljande filen kunde inte läsas eftersom den är tom." - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Okänt filformat: indata filen måste ha fil ändelsen .3mf eller .zip.amf." -msgid "Canceled" -msgstr "Avbruten" - msgid "load_obj: failed to parse" msgstr "load_obj: misslyckades med att analysera" msgid "load mtl in obj: failed to parse" -msgstr "load mtl in obj: failed to parse" +msgstr "" msgid "The file contains polygons with more than 4 vertices." msgstr "Filen innehåller polygoner med fler än 4 hörn." @@ -13716,7 +16572,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Vänligen ange giltiga värden:\n" "Startvärde: >= %.1f\n" @@ -13728,7 +16584,7 @@ msgid "The name cannot be empty." msgstr "Namnet får inte vara tomt." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Den valda inställningen: %s hittades inte." msgid "The name cannot be the same as the system preset name." @@ -13740,6 +16596,14 @@ msgstr "Namnet är detsamma som ett annat befintligt förinställt namn" msgid "create new preset failed." msgstr "skapande av ny inställning misslyckades." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -13762,23 +16626,15 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" -"This machine type can only hold 16 historical results per nozzle. You can " -"delete the existing historical results and then start calibration. Or you " -"can continue the calibration, but you cannot create new calibration " -"historical results. \n" -"Do you still want to continue the calibration?" -msgid "Connecting to printer..." -msgstr "Ansluter till skrivaren..." - -msgid "The failed test result has been dropped." -msgstr "Det misslyckade testresultatet har tagits bort." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Flödesdynamik kalibrerings resultaten har sparats på printern." +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13790,13 +16646,27 @@ msgstr "" "ett resultat med ett namn sparas. Är du säker på att du vill skriva över det " "tidigare resultatet?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"This machine type can only hold %d historical results per nozzle. This " -"result will not be saved." + +msgid "Connecting to printer..." +msgstr "Ansluter till skrivaren..." + +msgid "The failed test result has been dropped." +msgstr "Det misslyckade testresultatet har tagits bort." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Flödesdynamik kalibrerings resultaten har sparats på printern." msgid "Internal Error" msgstr "Internt fel" @@ -13804,11 +16674,11 @@ msgstr "Internt fel" msgid "Please select at least one filament for calibration" msgstr "Välj minst ett filament för kalibrering" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "" "Resultat för kalibrering av flödeshastigheten har sparats till inställningen." -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "Max volymetrisk hastighets kalibrerings resultat har sparats till " "förinställningen" @@ -13822,18 +16692,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Vi har nu lagt till automatisk kalibrering för olika filament, vilket är " -"helt automatiserat och resultatet sparas i printern för framtida användning. " -"Du behöver bara göra kalibreringen i följande begränsade fall:\n" -"1. Om du introducerar ett nytt filament av olika märken/modeller eller om " -"filamentet är fuktigt;\n" -"2. Om nozzeln är utsliten eller ersatt med ett nytt;\n" -"3. Om max volymhastighet eller utskriftstemperatur ändras i filament " -"inställningen." msgid "About this calibration" msgstr "Om denna kalibrering" @@ -13865,22 +16727,13 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"After using Flow Dynamics Calibration, there might still be some extrusion " -"issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -13925,22 +16778,6 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " -"directly measuring the calibration patterns. However, please be advised that " -"the efficacy and accuracy of this method may be compromised with specific " -"types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not " -"be suitable for this calibration and can produce less-than-desirable " -"results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We " -"are still improving the accuracy and compatibility of this calibration " -"through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only " -"by those who fully understand its purpose and implications. Incorrect usage " -"can lead to sub-par prints or printer damage. Please make sure to carefully " -"read and understand the process before performing it." msgid "When you need Max Volumetric Speed Calibration" msgstr "När du behöver kalibrering av maximal volymhastighet" @@ -13975,22 +16812,12 @@ msgstr "" "*Vi rekommenderar att du lägger till varumärke, material, typ och till och " "med fuktighetsnivå i namnet" -msgid "Failed" -msgstr "Misslyckades" - msgid "Please enter the name you want to save to printer." msgstr "Ange det namn som du vill spara på skrivaren." msgid "The name cannot exceed 40 characters." msgstr "Namnet får inte innehålla mer än 40 tecken." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Endast ett av resultaten med samma namn kommer att sparas. Är du säker på " -"att du vill ersätta de andra resultaten?" - msgid "Please find the best line on your plate" msgstr "Hitta den bästa linjen på din platta." @@ -14003,9 +16830,6 @@ msgstr "Ingångsvärde" msgid "Save to Filament Preset" msgstr "Spara till inställningar för filament" -msgid "Preset" -msgstr "Förinställd" - msgid "Record Factor" msgstr "Inspelnings faktor" @@ -14040,9 +16864,6 @@ msgstr "Hoppa över kalibrering2" msgid "flow ratio : %s " msgstr "flödes förhållande: %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Välj det block som har den jämnaste toppytan." - msgid "Please choose a block with smoothest top surface." msgstr "Välj det block som har den jämnaste toppytan." @@ -14071,22 +16892,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Parametrar för utskrift" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Typ av byggplatta" msgid "filament position" msgstr "Filament position" -msgid "External Spool" -msgstr "Extern spole" - msgid "Filament For Calibration" msgstr "Filament för kalibrering" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Tips för kalibreringsmaterial:\n" "- Material som kan ha samma temperatur på den varma bädden\n" @@ -14106,9 +16942,23 @@ msgstr "%s är inte kompatibel med %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU stöds inte för automatisk kalibrering av flödesdynamik." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Ansluter till skrivaren" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Från k Värde" @@ -14127,11 +16977,14 @@ msgstr "Från volymetrisk hastighet" msgid "To Volumetric Speed" msgstr "Till volymetrisk hastighet" +msgid "Are you sure you want to cancel this print?" +msgstr "Är du säker på att du vill avbryta utskriften?" + msgid "Flow Dynamics Calibration Result" msgstr "Resultat för kalibrering av flödesdynamik" msgid "New" -msgstr "New" +msgstr "" msgid "No History Result" msgstr "Inget historikresultat" @@ -14147,25 +17000,38 @@ msgstr "Åtgärd" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "This machine type can only hold %d historical results per nozzle." +msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Redigera kalibrering av flödesdynamik" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" -msgstr "New Flow Dynamic Calibration" +msgstr "" msgid "Ok" msgstr "Ok" msgid "The filament must be selected." -msgstr "The filament must be selected." +msgstr "" + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" msgid "Network lookup" msgstr "Nätverks sökning" msgid "Address" -msgstr "Address" +msgstr "" msgid "Hostname" msgstr "Värdnamn" @@ -14194,13 +17060,10 @@ msgstr "" msgid "PA Calibration" msgstr "PA kalibrering" -msgid "DDE" +msgid "Extruder type" msgstr "" -msgid "Bowden" -msgstr "Bowden" - -msgid "Extruder type" +msgid "DDE" msgstr "" msgid "PA Tower" @@ -14221,14 +17084,32 @@ msgstr "Slut PA: " msgid "PA step: " msgstr "PA steg: " +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" + msgid "Print numbers" msgstr "Skriv ut nummer" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Vänligen ange giltiga värden:\n" "Start PA: >= 0.0\n" @@ -14238,6 +17119,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Kalibrering av temperatur" +msgid "Filament type" +msgstr "Filament typ" + msgid "PLA" msgstr "PLA" @@ -14259,9 +17143,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filament typ" - msgid "Start temp: " msgstr "Start temp: " @@ -14271,11 +17152,14 @@ msgstr "Slut temp: " msgid "Temp step: " msgstr "Temp steg: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" msgid "Max volumetric speed test" @@ -14287,14 +17171,14 @@ msgstr "Start volymetrisk hastighet: " msgid "End volumetric speed: " msgstr "Slut volymetrisk hastighet: " -msgid "step: " -msgstr "steg: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "VFA test" @@ -14306,11 +17190,14 @@ msgstr "Start hastighet: " msgid "End speed: " msgstr "Sluthastighet: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" msgid "Start retraction length: " @@ -14319,10 +17206,131 @@ msgstr "Starta retraktion längd: " msgid "End retraction length: " msgstr "Slutets indragnings längd: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "" msgid "Upload to Printer Host with the following filename:" @@ -14369,18 +17377,35 @@ msgstr "Avbryt vald" msgid "Show error message" msgstr "Visa felmeddelande" -msgid "Enqueued" +msgid "Queued" msgstr "I kö" msgid "Uploading" msgstr "Laddar upp" -msgid "Cancelling" +msgid "Canceling" msgstr "Avbryter" msgid "Error uploading to print host" msgstr "" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "" + +msgid "Heated Bed Leveling" +msgstr "" + +msgid "Textured Build Plate (Side A)" +msgstr "" + +msgid "Smooth Build Plate (Side B)" +msgstr "" + msgid "Unable to perform boolean operation on selected parts" msgstr "Kan inte utföra boolean operationer på valda delar" @@ -14441,17 +17466,17 @@ msgstr "Systemversion:" msgid "DNS Server:" msgstr "DNS server:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "" -msgid "Test Bing.com" -msgstr "Test Bing.com" +msgid "Test bing.com" +msgstr "" msgid "Test bing.com:" -msgstr "Test bing.com:" +msgstr "" msgid "Log Info" msgstr "Info om logg" @@ -14511,7 +17536,7 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "Custom vendor missing; please input custom vendor." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" eller \"Generic\" kan inte användas som leverantör för anpassade " "filament." @@ -14519,7 +17544,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "Filament typ är inte vald, vänligen välj typ igen." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "Filament serial missing; please input serial." msgid "" @@ -14534,8 +17559,8 @@ msgstr "" "Alla inmatningar i den anpassade leverantören eller serien är mellanslag. " "Vänligen ange på nytt." -msgid "The vendor can not be a number. Please re-enter." -msgstr "The vendor can not be a number; please re-enter." +msgid "The vendor cannot be a number. Please re-enter." +msgstr "" msgid "" "You have not selected a printer or preset yet. Please select at least one." @@ -14543,11 +17568,11 @@ msgstr "Du har ännu inte valt någon printer eller inställning. Välj minst en #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Filamentnamnet %s som du skapade finns redan. \n" +"Filamentnamnet %s som du skapade finns redan.\n" "Om du fortsätter kommer den skapade inställningen att visas med sitt " "fullständiga namn. Vill du fortsätta?" @@ -14563,8 +17588,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" @@ -14588,21 +17613,27 @@ msgstr "Importera inställning" msgid "Create Type" msgstr "Skapa typ" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "The model was not found; please reselect vendor." -msgid "Select Model" -msgstr "Välj modell" - msgid "Select Printer" msgstr "Välj Printer" +msgid "Select Model" +msgstr "Välj modell" + msgid "Input Custom Model" msgstr "Mata in anpassad modell" msgid "Can't find my printer model" msgstr "Kan inte hitta min printer modell" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Rektangel" @@ -14612,15 +17643,9 @@ msgstr "Utskriftsbar yta" msgid "Hot Bed STL" msgstr "Värmeplatta STL" -msgid "Load stl" -msgstr "Ladda stl" - msgid "Hot Bed SVG" msgstr "Värmeplatta SVG" -msgid "Load svg" -msgstr "Ladda svg" - msgid "Max Print Height" msgstr "Max utskriftshöjd" @@ -14631,16 +17656,16 @@ msgstr "Filen överstiger %d MB, vänligen importera igen." msgid "Exception in obtaining file size, please import again." msgstr "Undantag vid erhållande av filstorlek, vänligen importera igen." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Inställd sökväg hittades inte; vänligen välj leverantör igen." msgid "The printer model was not found, please reselect." msgstr "Printer modellen hittades inte, välj igen." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "The nozzle diameter was not found; please reselect." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "The printer preset was not found; please reselect." msgid "Printer Preset" @@ -14655,9 +17680,6 @@ msgstr "Avmarkera alla" msgid "Process Preset Template" msgstr "Mall för process inställning" -msgid "Back Page 1" -msgstr "Tillbaka Sida 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -14672,9 +17694,6 @@ msgstr "" "Du har angett ett otillåtet tecken i det utskrivbara området på första " "sidan. Använd endast siffror." -msgid "The custom printer or model is not inputed, place input." -msgstr "The custom printer or model missing; please input." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -14704,14 +17723,14 @@ msgstr "Skapa inställningar för filament misslyckades. Enligt följande:\n" msgid "Create process presets failed. As follows:\n" msgstr "Skapa process inställningar misslyckades. Enligt följande:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Leverantören hittades inte; välj igen." msgid "Current vendor has no models, please reselect." msgstr "Nuvarande leverantör har inga modeller, vänligen välj om." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "Du har inte valt leverantör och modell eller angett anpassad leverantör och " @@ -14739,10 +17758,18 @@ msgstr "" "Du har ännu inte valt vilken printer som nozzeln ska bytas ut på; välj en " "printer." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Skapa Printer lyckades" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Filament Created Successfully" msgid "Printer Created" @@ -14771,7 +17798,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" @@ -14823,16 +17850,23 @@ msgstr "" "If not, a time suffix will be added, and you can modify the name after " "creation." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Användarens inställning för filament. \n" +"Användarens inställning för filament.\n" "Kan delas med andra." msgid "" @@ -14877,7 +17911,7 @@ msgid "Please select a type you want to export" msgstr "Välj en inställningstyp som du vill exportera" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "Failed to create temporary folder, please try Export Configs again." +msgstr "" msgid "Edit Filament" msgstr "Redigera filament" @@ -14892,7 +17926,7 @@ msgstr "" "Observera: Om den enda inställningen under detta filament raderas, kommer " "filamentet att raderas efter att dialogen har avslutats." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "Inställningar som ärvts av andra inställningar kan inte raderas" msgid "The following presets inherits this preset." @@ -14903,6 +17937,15 @@ msgstr[1] "" msgid "Delete Preset" msgstr "Ta bort inställning" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Är du säker på att du vill radera den valda inställningen?\n" +"Om inställningen motsvarar ett filament som för närvarande används på din " +"skrivare, vänligen återställ filament informationen för den platsen." + msgid "Are you sure to delete the selected preset?" msgstr "Är du säker på att du vill radera den valda inställningen?" @@ -14912,16 +17955,12 @@ msgstr "Ta bort inställning" msgid "+ Add Preset" msgstr "+ Lägg till inställning" -msgid "Delete Filament" -msgstr "Ta bort filament" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Alla filament inställningar som hör till detta filament kommer att " -"raderas. \n" +"Alla filament inställningar som hör till detta filament kommer att raderas.\n" "Om du använder detta filament i din printer, vänligen återställ filament " "informationen för den platsen." @@ -14956,19 +17995,34 @@ msgid "Daily Tips" msgstr "Dagliga tips" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "nozzel memorerat: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Your nozzle diameter in preset is not consistent with the saved nozzle " -"diameter. Have you changed your nozzle?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*Utskrift av %s material med %s kan orsaka skador på nozzeln" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Välj printer" @@ -14976,6 +18030,35 @@ msgstr "Välj printer" msgid "The start, end or step is not valid value." msgstr "Start, slut eller steg är inte giltigt värde." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -14998,9 +18081,6 @@ msgstr "Lyckades!" msgid "Are you sure to log out?" msgstr "" -msgid "Refresh Printers" -msgstr "Uppdatera skrivare" - msgid "View print host webui in Device tab" msgstr "" @@ -15046,22 +18126,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Felaktig typ av utskriftsvärd: %s" -msgid "Connection to AstroBox works correctly." -msgstr "Connection to AstroBox is working correctly." +msgid "Connection to AstroBox is working correctly." +msgstr "" msgid "Could not connect to AstroBox" msgstr "Kunde inte ansluta till AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Note: AstroBox version 1.1.0 or higher is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet is working correctly." +msgid "Connection to Duet is working correctly." +msgstr "" msgid "Could not connect to Duet" msgstr "Kunde inte ansluta till Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Okänt fel uppstod" msgid "Wrong password" @@ -15073,8 +18153,8 @@ msgstr "Det gick inte att hämta resurser för att skapa en ny anslutning" msgid "Upload not enabled on FlashAir card." msgstr "Uppladdning inte aktiverad på FlashAir kort." -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "Connection to FlashAir is working correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "" msgid "Could not connect to FlashAir" msgstr "Kunde inte ansluta till FlashAir" @@ -15086,29 +18166,29 @@ msgstr "" "Obs: FlashAir med firmware 2.00.02 eller nyare och aktiverad " "uppladdningsfunktion krävs." -msgid "Connection to MKS works correctly." -msgstr "Connection to MKS is working correctly." +msgid "Connection to MKS is working correctly." +msgstr "" msgid "Could not connect to MKS" msgstr "Kunde inte ansluta till MKS" -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint is working correctly." +msgid "Connection to OctoPrint is working correctly." +msgstr "" msgid "Could not connect to OctoPrint" msgstr "Kunde inte ansluta till OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version 1.1.0 or higher is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "" -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "Connection to Prusa SL1 / SL1S is working correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "" msgid "Could not connect to Prusa SLA" msgstr "Kunde inte ansluta till Prusa SLA" -msgid "Connection to PrusaLink works correctly." -msgstr "Connection to PrusaLink is working correctly." +msgid "Connection to PrusaLink is working correctly." +msgstr "" msgid "Could not connect to PrusaLink" msgstr "Kunde inte ansluta till PrusaLink" @@ -15131,20 +18211,20 @@ msgstr "" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "" -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "" msgid "Could not connect to Prusa Connect" msgstr "" -msgid "Connection to Repetier works correctly." -msgstr "Connection to Repetier is working correctly." +msgid "Connection to Repetier is working correctly." +msgstr "" msgid "Could not connect to Repetier" msgstr "Kunde inte ansluta till Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Note: Repetier version 0.90.0 or higher is required." +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "" #, boost-format msgid "" @@ -15175,255 +18255,477 @@ msgstr "" "Felmeddelande: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" -"It has a small layer height, and results in almost negligible layer lines " -"and high print quality. It is suitable for most general printing cases." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " "and acceleration, and the sparse infill pattern is Gyroid. This results in " "much higher print quality but a much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " "bigger layer height. This results in almost negligible layer lines and " -"slightly longer print time." +"slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " "height. This results in slightly visible layer lines but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "height. This results in almost invisible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost invisible layer lines and much higher print " "quality but much longer print time." - -msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." msgstr "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height. This results in minimal layer lines and higher print quality but " -"longer print time." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" + +msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in minimal layer lines and much higher print quality " "but much longer print time." +msgstr "" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." -msgstr "" -"It has a normal layer height, and results in average layer lines and print " +"It has a normal layer height. This results in average layer lines and print " "quality. It is suitable for most printing cases." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but slightly shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in less apparent layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, lower speeds and acceleration, and the sparse infill pattern is " "Gyroid. This results in almost negligible layer lines and much higher print " "quality but much longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." -msgstr "" -"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height. This results in almost negligible layer lines and longer print time." +msgstr "" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " "and a higher sparse infill density. This results in higher print strength " "but more filament consumption and longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height. This results in more apparent layer lines and lower print quality " +"height. This results in more apparent layer lines and lower print quality, " "but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " "height. This results in much more apparent layer lines and much lower print " "quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height. This results in less apparent layer lines and slightly higher print " +"height. This results in less apparent layer lines and slight higher print " "quality but longer print time." +msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" -"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " "height. This results in less apparent layer lines and higher print quality " "but longer print time." +msgstr "" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"It has a very big layer height, and results in very apparent layer lines, " -"low print quality and shorter printing time." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " "height. This results in very apparent layer lines and much lower print " -"quality but shorter print time in some cases." +"quality, but shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " "layer height. This results in extremely apparent layer lines and much lower " -"print quality but much shorter print time in some cases." +"print quality, but much shorter print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " "smaller layer height. This results in slightly less but still apparent layer " -"lines and slightly higher print quality, but longer print time in some cases." +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." -msgstr "" -"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " "height. This results in less but still apparent layer lines and slightly " -"higher print quality, but longer print time in some cases." +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "" + +msgid "There is no device available to send printing." +msgstr "" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" + +msgid "Use External Spool" +msgstr "" + +msgid "Select Printers" +msgstr "" + +msgid "Device Name" +msgstr "" + +msgid "Device Status" +msgstr "" + +msgid "AMS Status" +msgstr "" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" + +msgid "Printing Options" +msgstr "" + +msgid "Bed Leveling" +msgstr "Justering av Byggplattan" + +msgid "Flow Dynamic Calibration" +msgstr "" + +msgid "Send Options" +msgstr "" + +msgid "Send to" +msgstr "" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" + +msgid "Wait" +msgstr "" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" + +msgid "Task Sending" +msgstr "" + +msgid "Task Sent" +msgstr "" + +msgid "Edit multiple printers" +msgstr "" + +msgid "Select connected printers (0/6)" +msgstr "" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "" + +msgid "No task" +msgstr "No task" + +msgid "Edit Printers" +msgstr "" + +msgid "Task Name" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Task Status" +msgstr "" + +msgid "Sent Time" +msgstr "" + +msgid "There are no tasks to be sent!" +msgstr "" + +msgid "No historical tasks!" +msgstr "" + +msgid "Upgrading" +msgstr "" + +msgid "syncing" +msgstr "" + +msgid "Printing Finish" +msgstr "" + +msgid "Printing Failed" +msgstr "" + +msgid "Printing Pause" +msgstr "" + +msgid "Pending" +msgstr "" + +msgid "Sending" +msgstr "Skickar" + +msgid "Sending Finish" +msgstr "" + +msgid "Sending Cancel" +msgstr "" + +msgid "Sending Failed" +msgstr "" + +msgid "Print Success" +msgstr "" + +msgid "Print Failed" +msgstr "" + +msgid "Removed" +msgstr "" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" msgid "Connected to Obico successfully!" msgstr "" @@ -15446,10 +18748,10 @@ msgstr "" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" -msgid "Connection to Flashforge works correctly." +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." @@ -15461,7 +18763,110 @@ msgstr "" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" -msgid "User cancelled." +msgid "User canceled." +msgstr "" + +msgid "Head diameter" +msgstr "" + +msgid "Max angle" +msgstr "" + +msgid "Detection radius" +msgstr "" + +msgid "Remove selected points" +msgstr "" + +msgid "Remove all" +msgstr "" + +msgid "Auto-generate points" +msgstr "" + +msgid "Add a brim ear" +msgstr "" + +msgid "Delete a brim ear" +msgstr "" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " ogiltiga öron" + +msgid "Brim Ears" +msgstr "Brätte Öron" + +msgid "Please select single object." +msgstr "" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15521,7 +18926,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" #: resources/data/hints.ini: [hint:Reverse on odd] @@ -15562,7 +18967,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Placera Automatiskt\n" "Visste du att du automatiskt kan ordna alla objekt i ditt projekt?" @@ -15571,7 +18976,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Auto-Orient\n" "Visste du att du kan rotera objekt till en optimal orientering för utskrift " @@ -15736,7 +19141,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Brim för bättre vidhäftning\n" @@ -15747,7 +19152,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Ange parametrar för flera objekt\n" "Visste du att du kan ställa in berednings parametrar för alla valda objekt " @@ -15764,8 +19169,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Rensa in i support/objekt/ifyllnad\n" "Visste du att du kan minska filament åtgång genom att rensa den till support/" @@ -15781,13 +19186,13 @@ msgstr "" "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet " "för att förbättra modellens styrka?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "När behöver du skriva ut med printer dörren öppen?\n" "Visste du att en öppen printer dörr kan minska risken för igensättning av " @@ -15799,12 +19204,877 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Undvik vridning\n" "Visste du att när du skriver ut material som är benägna att vrida, såsom " "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten " -"för vridning." +"för vridning?" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptiv lagerhöjd" + +#~ msgid "AMS not connected" +#~ msgstr "AMS ej ansluten" + +#~ msgid "Ext Spool" +#~ msgstr "Ext Spole" + +#~ msgid "Guide" +#~ msgstr "Guide" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Kalibrerar AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "Ett problem uppstod vid kalibrering. Tryck för att se åtgärd." + +#~ msgid "Calibrate again" +#~ msgstr "Kalibrera igen" + +#~ msgid "Cancel calibration" +#~ msgstr "Avbryt kalibrering" + +#~ msgid "Feed Filament" +#~ msgstr "Mata filament" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Ett Micro SD-kort måste sättas i innan utskrift via LAN." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Ett Micro SD-kort måste sättas i innan det skickas till skrivaren." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "" +#~ "Observera: Endast de AMS-fack som är laddade med samma materialtyp kan " +#~ "väljas." + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS kommer att uppskatta Bambu filamentets återstående kapacitet när " +#~ "filament informationen har uppdaterats. Under utskrift uppdateras den " +#~ "återstående kapaciteten automatiskt." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Den rekommenderade lägsta temperaturen är lägre än 190°C eller den " +#~ "rekommenderade max temperaturen är högre än 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Spiralläget fungerar endast när vägg varv är 1, support är inaktiverat, " +#~ "top skalets lager är 0, gles ifyllnad är 0 och timelapse typen är " +#~ "traditionell." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Sveper XY mech-läge" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Pausad på grund av filament slut" + +#~ msgid "Heating hotend" +#~ msgstr "Värmer hotend" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Kalibrerar extrudering" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Utskriften pausades av användaren" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Paus av front luckan faller" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Kalibrerar extruderings flödet" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Pausad på grund av fel i nozzle temperaturen" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Pausad på grund av fel i byggplattans temperatur" + +#~ msgid "Skip step pause" +#~ msgstr "Hoppa över steg paus" + +#~ msgid "Motor noise calibration" +#~ msgstr "Kalibrering av motorljud" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Pausad på grund av att AMS förlorats" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Pausad på grund av låg hastighet på heat break fläkten" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Pausad på grund av fel i styrningen av kammar temperaturen" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Pausad av G-koden som infogats av användaren" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Filament på nozzel upptäckt paus" + +#~ msgid "Cutter error pause" +#~ msgstr "Fel på skärare paus" + +#~ msgid "First layer error pause" +#~ msgstr "Fel på första lagret paus" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Stopp i nozzel paus" + +#~ msgid "Fatal" +#~ msgstr "Allvarligt" + +#~ msgid "Serious" +#~ msgstr "Allvarlig" + +#~ msgid "Common" +#~ msgstr "Vanlig" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF stöds inte av AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Ett objekt ligger över plattans gränser eller överskrider höjdgränsen.\n" +#~ "Lös problemet genom att flytta det helt på eller av plattan, och bekräfta " +#~ "att höjden ligger inom byggvolymen." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Du hittar den i ”Inställningar> Nätverk> Anslutningskod”\n" +#~ "på skrivaren, som visas i figuren:" + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Kontrollera om SD-kortet är sitter i printern.\n" +#~ "Om det fortfarande inte går att läsa kan du försöka formatera SD kortet." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Lagring saknas, sätt i SD-kort." + +#~ msgid "Cham" +#~ msgstr "Kammare" + +#~ msgid "Still unload" +#~ msgstr "Matar ut fortfarande" + +#~ msgid "Still load" +#~ msgstr "Laddar fortfarande" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Kan inte starta utan MicroSD-kort." + +#~ msgid "Update" +#~ msgstr "Uppdatera" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Känsligheten för paus är" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Inga AMS-filament. Välj en skrivare på sidan ”Enhet” för att ladda AMS-" +#~ "information." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Synkronisering av filament med AMS kommer att ta bort alla förvalda " +#~ "filament inställningar och färger. Vill du fortsätta?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Du har redan gjort en synkronisering; vill du bara synkronisera ändringar " +#~ "eller synkronisera allt på nytt?" + +#~ msgid "Sync" +#~ msgstr "Synkronisera" + +#~ msgid "Resync" +#~ msgstr "Synkronisera om" + +#~ msgid "General Settings" +#~ msgstr "Allmänna inställningar" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Visa \"Dagens tips\" efter start" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Om aktiverad visas användbara tips vid start." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Rensnings volymer: Beräkna automatiskt varje gång färgen ändras." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Om aktiverat, beräkna automatiskt varje gång färgen ändras." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Flushing volumes: Auto-calculate every time the filament is changed." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "If enabled, auto-calculate every time filament is changed" + +#~ msgid "User Sync" +#~ msgstr "Användar synkronisering" + +#~ msgid "System Sync" +#~ msgstr "Synkronisering av system" + +#~ msgid "every" +#~ msgstr "varje" + +#~ msgid "Downloads" +#~ msgstr "Nedladdningar" + +#~ msgid "Dark Mode" +#~ msgstr "Mörkt Läge" + +#~ msgid "Home page and daily tips" +#~ msgstr "Hemsida och dagliga förslag" + +#~ msgid "Show home page on startup" +#~ msgstr "Visa hemsida vid uppstart" + +#~ msgid "Please choose the filament color" +#~ msgstr "Välj filament färg" + +#~ msgid "Send print job to" +#~ msgstr "Skicka utskriftsjobb till" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s överskrider antalet AMS-fack. Uppdatera skrivarens " +#~ "programvara för att stödja tilldelning av AMS-fack." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament överskrider antalet AMS-fack. Uppdatera skrivarens programvara " +#~ "för att stödja tilldelning av AMS-fack." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Filament i AMS facken har fastställts. Du kan klicka på ett filament ovan " +#~ "för att ändra dess plats i AMS facken" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Klicka på varje filament ovan för att ange dess plats i AMS-facken innan " +#~ "du skickar utskriftsjobbet" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Skrivarens firmware stöder endast sekventiell mappning av filament => AMS-" +#~ "fack plats." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Ett Micro SD-kort måste sättas i innan utskrift." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Ett Micro SD-kort måste sättas i för att spela in en timelapse." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "nozzel memorerat: %.1f %s" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "Ansluter till skrivaren. Det går inte att avbryta under anslutnings " +#~ "processen." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Varning! Flödes kalibrering på texturerade PEI plattor kan misslyckas på " +#~ "grund av ytan." + +#~ msgid "Send to Printer SD card" +#~ msgstr "Skicka till skrivarens MicroSD-kort" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Ett MicroSD-kort måste sättas i innan du skickar till skrivaren." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "" +#~ "Skrivaren har inte stöd för att skicka till skrivarens MicroSD kort." + +#~ msgid "Auto-Calc" +#~ msgstr "Autoberäkna" + +#~ msgid "unloaded" +#~ msgstr "utmatad" + +#~ msgid "loaded" +#~ msgstr "laddad" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Från" + +#~ msgid "To" +#~ msgstr "Till" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " är för nära andra; det kan uppstå kollisioner vid utskrift." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Multipla filament som har större temperatur skillnader kan inte skrivas " +#~ "ut tillsammans. Extruder och nozzel kan blockeras eller skadas under " +#~ "utskrift" + +#~ msgid "Remove small overhangs" +#~ msgstr "Ta bort små överhäng" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Ta bort små överhäng som eventuellt inte behöver stöd." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Endast ett av resultaten med samma namn kommer att sparas. Är du säker på " +#~ "att du vill ersätta de andra resultaten?" + +#~ msgid "External Spool" +#~ msgstr "Extern spole" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "The custom printer or model missing; please input." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "nozzel i inställning: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Your nozzle diameter in preset is not consistent with the saved nozzle " +#~ "diameter. Have you changed your nozzle?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*Utskrift av %s material med %s kan orsaka skador på nozzeln" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + mushjul" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Mushjul" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + Vänster musknapp" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Skift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Mus flytta uppåt eller nedåt" + +#~ msgid "Left mouse button:" +#~ msgstr "Vänster musknapp:" + +#~ msgid "Right mouse button:" +#~ msgstr "Höger musknapp:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + Vänster musknapp" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift+Höger musknapp:" + +#~ msgid "Recent projects" +#~ msgstr "Senaste projekten" + +#~ msgid "Maximum recent projects" +#~ msgstr "Maximalt antal nyligen genomförda projekt" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Maximalt antal nyligen genomförda projekt" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Skift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Valfri pil" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Vänster musknapp" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Vänster musknapp" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Valfri pil" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Vänster musknapp" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+vänster musknapp" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Vänster musknapp" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+valfri pil" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Mushjul" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Mushjul" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+mushjul" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Mushjul" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+Mushjulet" + +#~ msgid "Set Position" +#~ msgstr "Ställ in Position" + +#~ msgid "%" +#~ msgstr "%" + +#, boost-format +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Höger klicka på ikonen för att reparera modell objektet" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "Det valda objektet innehåller endast en del och kan inte delas." + +#~ msgid "?" +#~ msgstr " ?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Failed to start printing job" +#~ msgstr "Det gick inte att starta utskriftsjobbet" + +#~ msgid "Color Scheme" +#~ msgstr "Färgschema" + +#~ msgid "Percent" +#~ msgstr "Procent" + +#~ msgid "Used filament" +#~ msgstr "Använt filament" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Mer..." + +#~ msgid "More calibrations" +#~ msgstr "Fler kalibreringar" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "MicroSD-kort" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Inget MicroSD-kort" + +#~ msgid "SD Card Abnormal" +#~ msgstr "MicroSD-kortet är onormalt" + +#, c-format, boost-format +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Utmatning av enheten %s(%s) misslyckades." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "Invalid number" +#~ msgstr "Ogiltligt nummer" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "nozzel memorerat: %.2f %s" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "" +#~ "konfigurations paketet är ej kompatibel med nuvarande version av Bambu " +#~ "Studio." + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "°C" +#~ msgstr "° C" + +#~ msgid "Compatible machine" +#~ msgstr "Kompatibel maskin" + +#~ msgid "Compatible machine condition" +#~ msgstr "Kompatibel maskin status" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Kompatibla process profilers status" + +#~ msgid "Default filament color" +#~ msgstr "Standard filament färg" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Högsta utskrivbara lagerhöjd för extrudern: detta används för att " +#~ "begränsa den maximala lagerhöjden när adaptiv lagerhöjd är aktiverad" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Den lägsta utskrivbara lagerhöjden för extrudering. Används tp begränsas " +#~ "den lägsta lagerhöjden när adaptiv lagerhöjd aktiveras" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "En del av materialet i extrudern dras tillbaka för att undvika dropp " +#~ "under långa förflyttningar. Sätt på 0 för att inaktivera retraktion" + +#~ msgid "Speed of retractions." +#~ msgstr "Hastighet för retraktion" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Laddnings hastighet för filamentet in i extrudern efter en retraktion; om " +#~ "du ställer in detta till 0 betyder det att det blir samma hastighet som " +#~ "retraktionen" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Avstånd mellan gränssnitts linjer. 0 betyder solid gränssnitt" + +#, fuzzy +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "Minsta tjocklek på tunna funktioner. Modellfunktioner som är tunnare än " +#~ "detta värde skrivs inte ut, medan funktioner som är tjockare än minsta " +#~ "funktionsstorlek kommer att utvidgas till minsta väggbredd. Det uttrycks " +#~ "som en procentandel över nozzelns diameter" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "" +#~ "ladda senaste process/maskin inställningar vid användning av senaste" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Vi har nu lagt till automatisk kalibrering för olika filament, vilket är " +#~ "helt automatiserat och resultatet sparas i printern för framtida " +#~ "användning. Du behöver bara göra kalibreringen i följande begränsade " +#~ "fall:\n" +#~ "1. Om du introducerar ett nytt filament av olika märken/modeller eller om " +#~ "filamentet är fuktigt;\n" +#~ "2. Om nozzeln är utsliten eller ersatt med ett nytt;\n" +#~ "3. Om max volymhastighet eller utskriftstemperatur ändras i filament " +#~ "inställningen." + +#~ msgid "step: " +#~ msgstr "steg: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "Ladda STL" + +#~ msgid "Load svg" +#~ msgstr "Ladda svg" + +#~ msgid "Back Page 1" +#~ msgstr "Tillbaka Sida 1" + +#~ msgid "Delete Filament" +#~ msgstr "Ta bort filament" + +#~ msgid "Refresh Printers" +#~ msgstr "Uppdatera skrivare" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Vi har lagt till en experimentell stil \"Tree Slim\" som har mindre " +#~ "support volym men svagare styrka.\n" +#~ "Vi rekommenderar att du använder den tillsammans med: 0 gränssnitts " +#~ "lager, 0 övre avstånd, 2 väggar." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "För ”Tree Strong” och ”Tree Hybrid” stilar rekommenderar vi följande " +#~ "inställningar: minst 2 anläggnings lager, minst 0,1 mm topp z-avstånd " +#~ "eller med support material på anläggningsytan." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "Denna inställning anger antalet väggar runt supporten" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Support: generera verktygsbana vid lager %d" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Support: upptäck överhäng" + +#~ msgid "Support: propagate branches" +#~ msgstr "Support: föröka grenar" + +#~ msgid "Support: draw polygons" +#~ msgstr "Support: rita polygoner" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Support: generera verktygsbana" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Support: generera polygoner vid lager %d" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Support: åtgärda hål vid lager %d" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Support: föröka grenar vid lager %d" + +#~ msgid "Stopped." +#~ msgstr "Avbruten." + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "Sammankoppling misslyckades [%d]" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Initieringen misslyckades (Enhets anslutningen är inte klar)!" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Initieringen misslyckades (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN-anslutning misslyckades (skickar utskriftsfil)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Steg 1: Bekräfta att Snapmaker Orca och din skrivare finns på samma LAN." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Steg 2, om IP- och åtkomst koden nedan skiljer sig från de faktiska " +#~ "värdena på skrivaren, korrigera dem." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Steg 3: Pinga IP-adressen för att kontrollera paketförlust och latens." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Tvinga kylning av överhäng och bridge/bryggor" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Aktivera detta val för att optimisera del kylningens hastighet för " +#~ "överhäng och bridge/bryggor" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Fläkthastighet för överhäng" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Tvinga del kylningsfläkten att hålla denna hastighet när utskrift av " +#~ "bridge/bryggor eller överhäng som är större än överhängs graderna skrivs " +#~ "ut. Tvingande kylning för överhäng och bridge/bryggor kan ge bättre " +#~ "kvalitet på dessa delar" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Överhängs kylningens tröskel" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Tvinga kylfläkten att vara en specifik hastighet när överhängs graden av " +#~ "objektets del överstiger detta värde. Detta uttrycks som en procentsats " +#~ "som anger hur mycket bredden på linjen utan stöd från det nedre lagret. " +#~ "0%% betyder tvinga kylning för all yttervägg oavsett överhängs grad." + +#~ msgid "Thick bridges" +#~ msgstr "Tjocka bridges" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Skala" + +#~ msgid "Z-hop when retract" +#~ msgstr "Z-hopp vid retraktion" + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Vid utskrift av objekt kan extrudern kollidera med en skirt.\n" +#~ "Återställ därför skirt lagret till 1 för att undvika kollisioner." + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Minska detta värde något (tex 0.9) för att minska material åtgång för " +#~ "bridges/bryggor, detta för att förbättra kvaliteten" + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Denna faktor påverkar mängden material för den övre solida fyllningen. Du " +#~ "kan minska den något för att få en jämn ytfinish." + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Hastighet för bridges/bryggor och hela överhängs väggar" + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Ladda nytt filament vid byte av filament, endast för statistiska ändamål" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Ladda ur gammalt filament vid byte av filament, endast för statistiska " +#~ "ändamål" + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Olika nozzel diametrar och olika filament diametrar är inte tillåtna när " +#~ "prime tower är aktiverat." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "" +#~ "Förebyggande av läckage stöds för närvarande inte med prime tower " +#~ "aktiverat." + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Sammankopplingsdjup för en segmenterad region. Noll inaktiverar denna " +#~ "funktion." #~ msgid "Please input a valid value (K in 0~0.3)" #~ msgstr "Ange ett giltigt värde (K i 0~0.3)" @@ -15875,9 +20145,6 @@ msgstr "" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Hitta hörnet med den perfekta graden av extrudering" -#~ msgid "V" -#~ msgstr "V" - #~ msgid "Export &Configs" #~ msgstr "Exportera konfiguration" @@ -15896,34 +20163,18 @@ msgstr "" #~ "The percentage value is relative to line width of sparse infill" #~ msgstr "" #~ "Detta gör att ifyllnads området kan förstoras något för att överlappa " -#~ "väggarna för bättre vidhäftning.Det procentuella värdet är i förhållande " +#~ "väggarna för bättre vidhäftning. Det procentuella värdet är i förhållande " #~ "till linjebredden för sparsam ifyllnad" #~ msgid "Unload Filament" #~ msgstr "Mata ut" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Välj ett AMS fack tryck sedan \"Ladda eller \"Mata ur\" knappen för att " -#~ "automatiskt mata eller mata ut filament." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Moderkort" -#~ msgid "TH" -#~ msgstr "TH" - #~ msgid "XCam" #~ msgstr "X Kamera" -#~ msgid "HMS" -#~ msgstr "HMS" - #~ msgid "active" #~ msgstr "aktiv" @@ -15963,7 +20214,7 @@ msgstr "" #~ "representerar kammaren korrekt." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Observera: Om nytt filament sätts in under utskrift kommer AMS inte " @@ -15979,8 +20230,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Initieringen misslyckades (ingen kamera enhet)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Skrivaren är upptagen med att ladda ner; vänta tills nedladdningen är " #~ "klar." @@ -16007,15 +20257,12 @@ msgstr "" #~ msgid "Load failed [%d]" #~ msgstr "Inläsning misslyckades [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model information from printer." #~ msgstr "Det gick inte att hämta modell information från skrivaren." -#~ msgid "Failed to parse model infomations." -#~ msgstr "Det gick inte att analysera modellinformation" - #, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16024,7 +20271,7 @@ msgstr "" #~ "inställningar?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -16042,7 +20289,7 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Konfigurations paket uppdaterat till " -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "Konfigurationen kan inte laddas." #~ msgid "Movement:" @@ -16073,10 +20320,10 @@ msgstr "" #~ msgstr "Kontakterna måste vara på objektets yta." #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" -#~ "Ogiltigt tillstånd. \n" +#~ "Ogiltigt tillstånd.\n" #~ "Ingen del är vald att behålla efter skärning" #~ msgid "Edit Text" @@ -16091,9 +20338,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "Välj SLA arkiv:" -#~ msgid "Import file" -#~ msgstr "Importera fil" - #~ msgid "Import model and profile" #~ msgstr "Importera modell och profil" @@ -16146,9 +20390,6 @@ msgstr "" #~ "Nej - Återställ automatiskt densiteten till standardvärdet som inte är " #~ "100 %." -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "Värm nozzeln till över 170 grader innan du laddar filamentet." - #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" #~ msgstr "" @@ -16164,9 +20405,6 @@ msgstr "" #~ msgid " doesn't work at 100%% density " #~ msgstr " fungerar inte vid 100%% densitet " -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - #~ msgid "Tool-Lay on Face" #~ msgstr "Ytplacerings verktyg" @@ -16185,7 +20423,7 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Exportera Alla Objekt som STL" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "3mf ej kompatibel, laddar endast geometrin !" #~ msgid "Incompatible 3mf" @@ -16225,124 +20463,6 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "inre-yttre-inre/utfyllnad" -#~ msgid "Export 3MF" -#~ msgstr "Exportera 3mf" - -#~ msgid "Export project as 3MF." -#~ msgstr "Exportera projekt som3mf." - -#~ msgid "Export slicing data" -#~ msgstr "Exportera beredningsdata" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Exportera beredningsdata till en mapp" - -#~ msgid "Load slicing data" -#~ msgstr "Ladda berednings data" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Ladda cachad berednings data från katalogen" - -#~ msgid "Slice" -#~ msgstr "Bered" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Bered plattorna: 0-alla plattor, i-platta i, andra-ogiltiga" - -#~ msgid "Show command help." -#~ msgstr "Visa kommandohjälp." - -#~ msgid "UpToDate" -#~ msgstr "Aktuell" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Uppdatera konfigurations värdena i 3mf till det senaste." - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "max antal trianglar per platta för beredning" - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "Max berednings tid per platta i sekunder" - -#~ msgid "Normative check" -#~ msgstr "Normativ kontroll" - -#~ msgid "Check the normative items." -#~ msgstr "Kontrollera de normativa objekten." - -#~ msgid "Output Model Info" -#~ msgstr "Mata ut modell information" - -#~ msgid "Output the model's information." -#~ msgstr "Mata ut modellens information." - -#~ msgid "Export Settings" -#~ msgstr "Exportera inställningar" - -#~ msgid "Export settings to a file." -#~ msgstr "Exportera inställningar till en fil." - -#~ msgid "Send progress to pipe" -#~ msgstr "Skicka framsteg till röret (SLA)" - -#~ msgid "Send progress to pipe." -#~ msgstr "Skicka framsteg till röret (SLA)" - -#~ msgid "Arrange Options" -#~ msgstr "Placera Val" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Placera val: 0-inaktivera, 1-aktivera, andra-auto" - -#~ msgid "Convert Unit" -#~ msgstr "Konvertera enhet" - -#~ msgid "Convert the units of model" -#~ msgstr "Konvertera modellens enheter" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Skala modellen med en plus faktor" - -#~ msgid "Load General Settings" -#~ msgstr "Ladda allmänna inställningar" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Ladda process/maskin inställningar ifrån vald fil" - -#~ msgid "Load Filament Settings" -#~ msgstr "Ladda filament inställningar" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Ladda filament inställningar ifrån vald fil" - -#~ msgid "Skip Objects" -#~ msgstr "Hoppa över objekt" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Hoppa över vissa objekt i denna utskrift" - -#~ msgid "Output directory" -#~ msgstr "Mata ut katalog" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Mata ut katalogen för exporterade filer." - -#~ msgid "Debug level" -#~ msgstr "Felsökningsnivå" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" -#~ "spåra\n" - #~ msgid "" #~ "3D Scene Operations\n" #~ "Did you know how to control view and object/part selection with mouse and " @@ -16352,16 +20472,7 @@ msgstr "" #~ "Vet du hur du kontrollerar vy och objekt/delval med mus och pekskärm i 3D-" #~ "scenen?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Fix Modell\n" -#~ "Visste du att du kan fixa en skadad 3D-modell för att undvika många " -#~ "berednings problem?" - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Inbäddad" #~ msgid "Online Models" @@ -16415,14 +20526,11 @@ msgstr "" #~ msgid "Calibration of extrusion" #~ msgstr "Kalibrering av extrudering" -#~ msgid "Push new filament into the extruder" -#~ msgstr "Mata nytt filament till extruder" - #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" +#~ "layer for more than %d degrees Celsius.\n" +#~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "Byggplattans temperatur för andra lager är mindre än temperaturen för " #~ "första lager med mer än %d grader celsius.\n" @@ -16457,21 +20565,15 @@ msgstr "" #~ msgid "Score" #~ msgstr "Resultat" -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "Bambu High Temperature Plate" - #~ msgid "Can't connect to the printer" #~ msgstr "Kan inte ansluta till skrivaren" #~ msgid "Recommended temperature range" #~ msgstr "Rekommenderat nozzel temperaturs område" -#~ msgid "High Temp Plate" -#~ msgstr "High Temp Plate" - #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" #~ "Detta är byggplattans temperatur när High Temp Plate är installerad. " #~ "Värdet 0 betyder att filamentet inte stöder utskrift på High Temp Plate." @@ -16507,4 +20609,4 @@ msgstr "" #~ "andra lager kan göra att modellen lossnar från byggplattan." #~ msgid "Orient the model" -#~ msgstr "Orientera modellen" +#~ msgstr "Orientera modellen" \ No newline at end of file diff --git a/localization/i18n/tr/Snapmaker_Orca_tr.po b/localization/i18n/tr/Snapmaker_Orca_tr.po index e88447e494..153cbc485a 100644 --- a/localization/i18n/tr/Snapmaker_Orca_tr.po +++ b/localization/i18n/tr/Snapmaker_Orca_tr.po @@ -3,22 +3,132 @@ msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2024-07-11 00:22+0300\n" -"Last-Translator: Olcay ÖREN\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-09-30 09:12+0300\n" +"Last-Translator: GlauTech\n" "Language-Team: \n" "Language: tr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" -"X-Generator: Poedit 3.4.4\n" +"X-Generator: Poedit 3.7\n" -msgid "Supports Painting" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU, AMS tarafından desteklenmez." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Nemli PVA esnekleşecek ve AMS'nin içine sıkışacaktır, lütfen kullanmadan " +"önce kurutmaya dikkat edin." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"CF/GF filamentleri sert ve kırılgandır. AMS'de kırılması veya sıkışması " +"kolaydır, lütfen dikkatli kullanın." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Mevcut AMS nemi" + +msgid "Humidity" +msgstr "Nem" + +msgid "Temperature" +msgstr "Sıcaklık" + +msgid "Left Time" +msgstr "Kalan Süre" + +msgid "Drying" +msgstr "Kurutma" + +msgid "Idle" +msgstr "Boşta" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Seri:" + +msgid "Version:" +msgstr "Sürüm:" + +msgid "Latest version" +msgstr "Son sürüm" + +msgid "Support Painting" msgstr "Destek boyama" -msgid "Alt + Mouse wheel" -msgstr "Alt + Fare tekerleği" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Fare tekerleği" msgid "Section view" msgstr "Bölüm görünümü" @@ -26,9 +136,6 @@ msgstr "Bölüm görünümü" msgid "Reset direction" msgstr "Yönü sıfırla" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Fare tekerleği" - msgid "Pen size" msgstr "Kalem boyutu" @@ -44,9 +151,6 @@ msgstr "Sağ fare tuşu" msgid "Block supports" msgstr "Blok destekleri" -msgid "Shift + Left mouse button" -msgstr "Shift + Sol fare düğmesi" - msgid "Erase" msgstr "Sil" @@ -111,7 +215,7 @@ msgstr "Yüzüstü yatır" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Filament sayısı, boyama aracının desteklediği maksimum sayıyı aşıyor. Boyama " @@ -148,17 +252,26 @@ msgid "Smart fill" msgstr "Akıllı boyama" msgid "Bucket fill" -msgstr "Kova boya aracı" +msgstr "Boya kovası aracı" msgid "Height range" msgstr "Yükseklik aralığı" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "Enter" msgid "Toggle Wireframe" msgstr "Wireframe Göster/Gizle" +msgid "Remap filaments" +msgstr "Filamentleri yeniden eşleştir" + +msgid "Remap" +msgstr "Yeniden eşleştir" + +msgid "Cancel" +msgstr "İptal" + msgid "Shortcut Key " msgstr "Kısayol tuşu " @@ -181,9 +294,33 @@ msgstr "Boyalı rengi kaldır" msgid "Painted using: Filament %1%" msgstr "Şunlar kullanılarak boyanmıştır: Filament %1%" +msgid "Filament remapping finished." +msgstr "Filament yeniden eşleşme işlemi tamamlandı." + +msgid "Paint-on fuzzy skin" +msgstr "Pütürlü yüzey boyama" + +msgid "Brush size" +msgstr "Fırça boyutu" + +msgid "Brush shape" +msgstr "Fırça şekli" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Taşı" +msgid "Please select at least one object." +msgstr "Lütfen en az bir nesne seçin." + msgid "Gizmo-Move" msgstr "Gizmo-Taşı" @@ -214,14 +351,20 @@ msgstr "in" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "Parça seçimi" + +msgid "Fixed step drag" +msgstr "Sabit adım sürükleme" + +msgid "Single sided scaling" +msgstr "Tek taraflı ölçekleme" + msgid "Position" msgstr "Konum" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Döndürme" +msgid "Rotate (relative)" +msgstr "Döndür (göreceli)" msgid "Scale ratios" msgstr "Ölçek oranları" @@ -238,9 +381,6 @@ msgstr "Çeviri" msgid "Group Operations" msgstr "Grup Operasyonları" -msgid "Set Position" -msgstr "Pozisyonu ayarla" - msgid "Set Orientation" msgstr "Yönü Ayarla" @@ -253,22 +393,31 @@ msgstr "Konumu Sıfırla" msgid "Reset Rotation" msgstr "Döndürmeyi Sıfırla" -msgid "World coordinates" -msgstr "Dünya koordinatları" - msgid "Object coordinates" msgstr "Nesne koordinatları" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Dünya koordinatları" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Döndürme aracını açtığınızda mevcut döndürme değerini sıfırlayın." + +msgid "Rotate (absolute)" +msgstr "Döndür (mutlak)" + +msgid "Reset current rotation to real zeros." +msgstr "Mevcut dönüşü gerçek sıfırlara sıfırla." + +msgid "Part coordinates" +msgstr "Parça koordinatları" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Boyut" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "düzgün ölçek" @@ -282,7 +431,7 @@ msgid "Auto" msgstr "Otomatik" msgid "Manual" -msgstr "Manual" +msgstr "Manuel" msgid "Plug" msgstr "Tak" @@ -315,7 +464,7 @@ msgid "Flip upside down" msgstr "Baş aşağı çevir" msgid "Connectors" -msgstr "Konektörler" +msgstr "Bağlayıcılar" msgid "Type" msgstr "Tür" @@ -332,6 +481,12 @@ msgstr "Şekil" msgid "Depth" msgstr "Derinlik" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Döndürme" + msgid "Groove" msgstr "Oluk" @@ -432,9 +587,6 @@ msgstr "Yarıçapla ilgili alan oranı" msgid "Confirm connectors" msgstr "Bağlayıcıları onayla" -msgid "Cancel" -msgstr "İptal" - msgid "Build Volume" msgstr "Birim oluştur" @@ -509,7 +661,7 @@ msgstr[0] "%1$d bağlayıcı nesnenin dışında" msgstr[1] "%1$d bağlayıcı nesnenin dışında" msgid "Some connectors are overlapped" -msgstr "Bazı konektörler üst üste binmiş" +msgstr "Bazı bağlayıcılar üst üste binmiş" msgid "Select at least one object to keep after cutting." msgstr "Kesimden sonra saklanacak en az bir nesne seçin." @@ -592,14 +744,10 @@ msgstr "%d üçgen" msgid "Show wireframe" msgstr "Wireframe göster" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "İşlem önizlemesi sırasında uygulanamaz." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "İşlem zaten iptal ediliyor. Lütfen birkaç saniye bekleyin." msgid "Face recognition" @@ -608,12 +756,6 @@ msgstr "Yüz tanıma" msgid "Perform Recognition" msgstr "Tanıma Gerçekleştir" -msgid "Brush size" -msgstr "Fırça boyutu" - -msgid "Brush shape" -msgstr "Fırça şekli" - msgid "Enforce seam" msgstr "Dikişi uygula" @@ -650,7 +792,7 @@ msgid "Angle" msgstr "Açı" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "" "Gömülü\n" @@ -665,8 +807,8 @@ msgstr "Yüzey" msgid "Horizontal text" msgstr "Yatay metin" -msgid "Shift + Mouse move up or down" -msgstr "Shift + Fare yukarı veya aşağı hareket ettirir" +msgid "Mouse move up or down" +msgstr "Mouse’u yukarı veya aşağı hareket ettirin" msgid "Rotate text" msgstr "Metni döndür" @@ -728,8 +870,8 @@ msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." msgstr "" -"Metin seçilen yazı tipi kullanılarak yazılamıyor. Lütfen farklı bir yazı tipi " -"seçmeyi deneyin." +"Metin seçilen yazı tipi kullanılarak yazılamıyor. Lütfen farklı bir yazı " +"tipi seçmeyi deneyin." msgid "Embossed text cannot contain only white spaces." msgstr "Kabartmalı metin yalnızca beyaz boşluklardan oluşamaz." @@ -793,7 +935,7 @@ msgid "Change Text Type" msgstr "Metin Türünü Değiştir" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Kabartma metni için stili yeniden adlandırın (%1%)" msgid "Name can't be empty." @@ -988,7 +1130,7 @@ msgstr "Metnin merkezinin model yüzeyine uzaklığı." msgid "Undo rotation" msgstr "Döndürmeyi geri al" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Metni Saat yönünde döndürün." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1008,14 +1150,18 @@ msgstr "Metni bana çevir" msgid "Orient the text towards the camera." msgstr "Metni kameraya doğru yönlendirin." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "“%1%” yazı tipi kullanılamıyor. Lütfen başka birini seçin." + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" -"Tam olarak aynı yazı tipi yüklenemiyor(\"%1%\"). Uygulama benzer bir uygulama " -"seçti(\"%2%\"). Metni düzenlemeyi etkinleştirmek için yazı tipini belirtmeniz " -"gerekir." +"Tam olarak aynı yazı tipi yüklenemiyor(\"%1%\"). Uygulama benzer bir " +"uygulama seçti(\"%2%\"). Metni düzenlemeyi etkinleştirmek için yazı tipini " +"belirtmeniz gerekir." msgid "No symbol" msgstr "Sembol yok" @@ -1127,21 +1273,21 @@ msgstr "Doldurulmuş yolu aç" msgid "Undefined stroke type" msgstr "Tanımlanmamış vuruş türü" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "Yol kendi kendine kesişmeden ve birden fazla noktadan iyileştirilemez." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" -"Son şekil, aynı koordinata sahip birden fazla noktanın kendi kendine " -"kesişimini içerir." +"Son şekil, kendi kesişimini veya aynı koordinata sahip birden fazla noktayı " +"içerir." #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "Şekil görünmez (%1%) olarak işaretlendi." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Şeklin dolgusu (%1%) desteklenmeyenleri içeriyor: %2%." @@ -1171,7 +1317,8 @@ msgstr "SVG dosyasını diskten yeniden yükleyin." msgid "Change file" msgstr "Dosyayı değiştir" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Başka bir .svg dosyasına geçin" msgid "Forget the file path" @@ -1198,7 +1345,8 @@ msgstr "Farklı kaydet" msgid "Save SVG file" msgstr "SVG dosyasını kaydet" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "'.svg' dosyası olarak kaydet" msgid "Size in emboss direction." @@ -1266,6 +1414,9 @@ msgstr "Nano SVG ayrıştırıcı dosyadan (%1%) yüklenemiyor." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG dosyası kabartma yapılacak tek bir yol İÇERMEZ (%1%)." +msgid "No feature" +msgstr "Özellik yok" + msgid "Vertex" msgstr "Tepe noktası" @@ -1290,9 +1441,6 @@ msgstr "Kenarın merkezi" msgid "Center of circle" msgstr "Çemberin merkezi" -msgid "ShiftLeft mouse button" -msgstr "Shift + Sol fare düğmesi" - msgid "Select feature" msgstr "Özellik seçin" @@ -1308,18 +1456,24 @@ msgstr "Seçimi sıfırla" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Seçimi kaldır" +msgid "Cancel a feature until exit" +msgstr "İptal et" msgid "Measure" msgstr "Ölçüm" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Lütfen patlama oranının = 1 olduğunu onaylayın ve lütfen en az bir nesne " +"seçin." + msgid "Edit to scale" msgstr "Ölçeğe göre düzenleyin" msgctxt "Verb" -msgid "Scale" -msgstr "Ölçek" +msgid "Scale all" +msgstr "Tümünü ölçeklendir" msgid "None" msgstr "Hiçbiri" @@ -1333,6 +1487,48 @@ msgstr "Uzunluk" msgid "Selection" msgstr "Seçim" +msgid " (Moving)" +msgstr " (Hareketli)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Nesnelerde 2 yüz seçin ve \n" +"nesnelerin bir araya gelmesini sağlayın." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Nesnelerin üzerinde 2 nokta veya daire seçin ve \n" +"aralarındaki mesafeyi belirtin." + +msgid "Face" +msgstr "Yüzey" + +msgid " (Fixed)" +msgstr " (Sabit)" + +msgid "Point" +msgstr "Nokta" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Özellik 1 sıfırlandı, \n" +"özellik 2, özellik 1 oldu" + +msgid "Warning: please select Plane's feature." +msgstr "Uyarı: Lütfen Düzlemin özelliğini seçin." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Uyarı: Lütfen Noktanın veya Çemberin özelliğini seçin." + +msgid "Warning: please select two different meshes." +msgstr "Uyarı: Lütfen iki farklı ağ seçin." + msgid "Copy to clipboard" msgstr "Panoya kopyala" @@ -1348,8 +1544,26 @@ msgstr "Doğrudan mesafe" msgid "Distance XYZ" msgstr "Uzaklık XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Paralel" + +msgid "Center coincidence" +msgstr "Merkezi" + +msgid "Feature 1" +msgstr "Özellik 1" + +msgid "Reverse rotation" +msgstr "Ters dönüş" + +msgid "Rotate around center:" +msgstr "Merkezin etrafında döndürün:" + +msgid "Parallel distance:" +msgstr "Paralel mesafe:" + +msgid "Flip by Face 2" +msgstr "Yüzey 2’ye Göre Çevir" msgid "Notice" msgstr "Bildirim" @@ -1385,8 +1599,11 @@ msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "\"%1%\" yapılandırma dosyası yüklendi ancak bazı değerler tanınamadı." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "PrusaSlicer ve BambuStudio'ya dayanmaktadır" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca hafızasının yetersiz olması nedeniyle sonlandırılacak. Bir hata " @@ -1437,6 +1654,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Çalışma Zamanı" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Kaynak yolu mevcut değil veya bir dizin değil: %s" + #, c-format, boost-format msgid "" "%s\n" @@ -1467,8 +1688,8 @@ msgstr "Bilgi" msgid "" "The Snapmaker Orca configuration file may be corrupted and cannot be parsed.\n" "Snapmaker Orca has attempted to recreate the configuration file.\n" -"Please note, application settings will be lost, but printer profiles will not " -"be affected." +"Please note, application settings will be lost, but printer profiles will " +"not be affected." msgstr "" "Snapmaker Orca konfigürasyon dosyası bozulmuş olabilir ve ayrıştırılamayabilir.\n" "Snapmaker Orca, konfigürasyon dosyasını yeniden oluşturmayı denedi.\n" @@ -1484,27 +1705,27 @@ msgstr "Mevcut ön ayarlar yükleniyor" msgid "Loading a mode view" msgstr "Mod görünümü yükleniyor" -msgid "Choose one file (3mf):" -msgstr "Dosya seçin (3mf):" +msgid "Choose one file (3MF):" +msgstr "Dosya seçin (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Bir veya daha fazla dosya seçin (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Bir veya daha fazla dosya seçin (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Bir veya daha fazla dosya seçin (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Bir veya daha fazla dosya seçin (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" -msgstr "ZIP dosyasını seçin:" +msgstr "ZIP dosyasını seçin" -msgid "Choose one file (gcode/3mf):" -msgstr "Bir dosya seçin (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Bir dosya seçin (GCODE/3MF):" msgid "Some presets are modified." msgstr "Bazı ön ayarlar değiştirildi." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Modifield ön ayarlarını yeni projede tutabilir, değişiklikleri atabilir veya " @@ -1522,10 +1743,10 @@ msgstr "Projeyi Aç" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Snapmaker Orca'ın sürümü çok düşük ve normal şekilde kullanılabilmesi için en " -"son sürüme güncellenmesi gerekiyor" +"son sürüme güncellenmesi gerekiyor." msgid "Privacy Policy Update" msgstr "Gizlilik Politikası Güncellemesi" @@ -1593,7 +1814,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Orca Dilimleyici GUI'si başlatılamadı" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Önemli hata, istisna yakalandı: %1%" msgid "Quality" @@ -1623,17 +1844,23 @@ msgstr "Üst Katı Katmanlar" msgid "Top Minimum Shell Thickness" msgstr "Üst Minimum Kabuk Kalınlığı" +msgid "Top Surface Density" +msgstr "Üst yüzey yoğunluğu" + msgid "Bottom Solid Layers" msgstr "Alt Katı Katmanlar" msgid "Bottom Minimum Shell Thickness" msgstr "Alt Minimum Kabuk Kalınlığı" +msgid "Bottom Surface Density" +msgstr "Alt yüzey yoğunluğu" + msgid "Ironing" msgstr "Ütüleme" msgid "Fuzzy Skin" -msgstr "Bulanık kaplama" +msgstr "Pütürlü Yüzey" msgid "Extruders" msgstr "Ekstruderler" @@ -1645,7 +1872,7 @@ msgid "Wipe options" msgstr "Temizleme seçenekleri" msgid "Bed adhesion" -msgstr "Etek" +msgstr "Tabla Yapışması" msgid "Add part" msgstr "Parça ekle" @@ -1695,6 +1922,9 @@ msgstr "Sil" msgid "Delete the selected object" msgstr "Seçilen nesneyi sil" +msgid "Backspace" +msgstr "Backspace" + msgid "Load..." msgstr "Yükle..." @@ -1716,6 +1946,9 @@ msgstr "Simit" msgid "Orca Cube" msgstr "Orca Küpü" +msgid "Orca Tolerance Test" +msgstr "Orca tolerans testi" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1733,7 +1966,7 @@ msgstr "Orca Cehennemi" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1793,6 +2026,12 @@ msgstr "STL ile değiştirin" msgid "Replace the selected part with new STL" msgstr "Seçilen parçayı yeni STL ile değiştirin" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Filamenti değiştir" @@ -1816,30 +2055,30 @@ msgid "Scale an object to fit the build volume" msgstr "Bir nesneyi yapı hacmine uyacak şekilde ölçeklendirin" msgid "Flush Options" -msgstr "Hizalama Seçenekleri" +msgstr "Akıtma Seçenekleri" msgid "Flush into objects' infill" -msgstr "Nesnelerin dolgusuna hizalayın" +msgstr "Nesnelerin dolgusuna akıt" msgid "Flush into this object" -msgstr "Bu nesnenin içine hizala" +msgstr "Bu nesneye akıt" msgid "Flush into objects' support" -msgstr "Nesnelerin desteğine hizalayın" +msgstr "Nesnelerin desteğine akıt" msgid "Edit in Parameter Table" msgstr "Parametre tablosunda düzenle" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "İnçten dönüştür" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "İnçe geri çevir" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Metreden dönüştür" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Metreye geri çevir" msgid "Assemble" @@ -1926,9 +2165,18 @@ msgstr "Seçilen nesneyi böl" msgid "Auto orientation" msgstr "Otomatik yönlendirme" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Baskı kalitesini artırmak için nesneyi otomatik olarak yönlendirin." +msgid "Edit" +msgstr "Düzenle" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Hepsini seç" @@ -1965,6 +2213,30 @@ msgstr "Plakayı sil" msgid "Remove the selected plate" msgstr "Seçilen plakayı kaldır" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Klon oluştur" @@ -1974,9 +2246,18 @@ msgstr "Modeli basitleştir" msgid "Center" msgstr "Merkez" +msgid "Drop" +msgstr "Düşür" + msgid "Edit Process Settings" msgstr "İşlem ayarlarını düzenle" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Tek bir nesne için yazdırma parametrelerini düzenleme" @@ -2022,8 +2303,8 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d manifold olmayan kenar" msgstr[1] "%1$d manifold olmayan kenar" -msgid "Right click the icon to fix model object" -msgstr "Model nesnesini düzeltmek için simgeye sağ tıklayın" +msgid "Click the icon to repair model object" +msgstr "Model nesnesini onarmak için simgeye tıklayın" msgid "Right button click the icon to drop the object settings" msgstr "Nesne ayarlarını bırakmak için simgeye sağ tıklayın" @@ -2071,6 +2352,9 @@ msgstr "" "Seçilen nesnelerin işlem ayarlarını düzenlemek için nesne başına ayar moduna " "geçin." +msgid "Remove paint-on fuzzy skin" +msgstr "Boyalı pütürlü yüzeyi çıkarın" + msgid "Delete connector from object which is a part of cut" msgstr "Kesilen parçanın parçası olan nesneden bağlayıcıyı sil" @@ -2089,10 +2373,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" -"To manipulate with solid parts or negative volumes you have to invalidate cut " -"infornation first." +"To manipulate with solid parts or negative volumes you have to invalidate " +"cut information first." msgstr "" "Bu eylem kesilmiş bir yazışmayı bozacaktır.\n" "Bundan sonra model tutarlılığı garanti edilemez.\n" @@ -2106,8 +2390,8 @@ msgstr "Tüm bağlayıcıları sil" msgid "Deleting the last solid part is not allowed." msgstr "Son katı kısmın silinmesine izin verilmez." -msgid "The target object contains only one part and can not be splited." -msgstr "Hedef nesne yalnızca bir parça içerir ve bölünemez." +msgid "The target object contains only one part and can not be split." +msgstr "Hedef nesne yalnızca bir parçadan oluşur ve bölünemez." msgid "Assembly" msgstr "Birleştir" @@ -2149,13 +2433,14 @@ msgid "Selection conflicts" msgstr "Seçim çakışmaları" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "İlk seçilen öğe bir nesne ise ikincisi de nesne olmalıdır." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." -msgstr "İlk seçilen öğe bir parça ise ikincisi aynı nesnenin parçası olmalıdır." +"If the first selected item is a part, the second should be a part in the " +"same object." +msgstr "" +"İlk seçilen öğe bir parça ise ikincisi aynı nesnenin parçası olmalıdır." msgid "The type of the last solid object part is not to be changed." msgstr "Son katı nesne parçasının tipi değiştirilNozullidir." @@ -2216,8 +2501,8 @@ msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" "bir hücre aynı sütundaki yalnızca bir veya daha fazla hücreye kopyalanabilir" -msgid "multiple cells copy is not supported" -msgstr "birden fazla hücre kopyalama desteklenmiyor" +msgid "Copying multiple cells is not supported." +msgstr "Birden fazla hücre kopyalama desteklenmiyor." msgid "Outside" msgstr "Dış" @@ -2235,7 +2520,10 @@ msgid "Auto Brim" msgstr "Otomatik Kenar" msgid "Mouse ear" -msgstr "Fare Kulağı" +msgstr "Fare kulağı" + +msgid "Painted" +msgstr "Boyalı" msgid "Outer brim only" msgstr "Yalnızca dış kenar" @@ -2388,23 +2676,8 @@ msgstr "Lütfen yazıcının ve Studio'nun ağ bağlantısını kontrol edin." msgid "Connecting..." msgstr "Bağlanıyor..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Boş" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Otomatik Doldurma" - -msgid "AMS not connected" -msgstr "AMS bağlı değil" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Yükle" @@ -2412,30 +2685,124 @@ msgstr "Yükle" msgid "Unload" msgstr "Boşalt" -msgid "Ext Spool" -msgstr "Harici Makara" - -msgid "Tips" -msgstr "İpuçları" - -msgid "Guide" -msgstr "Rehber" - -msgid "Retry" -msgstr "Yeniden dene" - -msgid "Calibrating AMS..." -msgstr "AMS kalibre ediliyor..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"Kalibrasyon sırasında bir sorun oluştu. Çözümü görüntülemek için tıklayın." +"Bir AMS yuvası seçin ve filamentleri otomatik olarak yüklemek veya boşaltmak " +"için “Yükle” veya “Boşalt” düğmesine basın." -msgid "Calibrate again" -msgstr "Tekrar kalibre edin" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "Kalibrasyonu iptal et" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Filtreli" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Soğutma" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Üst" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Yardımcı" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "Rölantide Çalışıyor..." @@ -2452,44 +2819,37 @@ msgstr "Mevcut filamenti geri çekin" msgid "Push new filament into extruder" msgstr "Yeni filamenti ekstrudere itin" +msgid "Grab new filament" +msgstr "Yeni filament al" + msgid "Purge old filament" msgstr "Eski filamenti temizleyin" -msgid "Feed Filament" -msgstr "Filament Ekstrude" - msgid "Confirm extruded" msgstr "Filamentin ekstrude edildiğini onayla" msgid "Check filament location" msgstr "Filament konumunu kontrol et" -msgid "Grab new filament" -msgstr "Yeni filament al" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Bir AMS yuvası seçin ve filamentleri otomatik olarak yüklemek veya boşaltmak " -"için “Yükle” veya “Boşalt” düğmesine basın." -msgid "Edit" -msgstr "Düzenle" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Seçilen tüm nesneler kilitli plaka üzerindedir,\n" "Bu nesneler üzerinde otomatik düzenleme yapamıyoruz." -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "Düzenlenebilir hiçbir nesne seçilmedi." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Bu plaka kilitli.\n" "Bu plaka üzerinde otomatik düzenleme yapamıyoruz." @@ -2512,29 +2872,31 @@ msgstr "" msgid "Arranging done." msgstr "Hizalama tamamlandı." -msgid "Arrange failed. Found some exceptions when processing object geometries." +msgid "" +"Arrange failed. Found some exceptions when processing object geometries." msgstr "" "Hizalama başarısız oldu. Nesne geometrilerini işlerken bazı istisnalar " "bulundu." #, c-format, boost-format msgid "" -"Arrangement ignored the following objects which can't fit into a single bed:\n" +"Arrangement ignored the following objects which can't fit into a single " +"bed:\n" "%s" msgstr "" "Hizalama tek plakaya sığmayan aşağıdaki nesneler göz ardı edildi:\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Seçilen tüm nesneler kilitli plaka üzerindedir,\n" "Bu nesneler üzerinde otomatik yönlendirme yapamıyoruz." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Bu plaka kilitli.\n" "Bu plaka üzerinde otomatik yönlendirme yapamıyoruz." @@ -2589,7 +2951,7 @@ msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "Bulut hizmeti bağlantısı başarısız oldu. Lütfen tekrar deneyin." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Yazdırma dosyası bulunamadı. lütfen tekrar dilimleyin." msgid "" @@ -2618,8 +2980,9 @@ msgstr "" "Yazdırma dosyasının boyutu çok büyük. Lütfen dosya boyutunu ayarlayıp tekrar " "deneyin." -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "Yazdırma dosyası bulunamadı. Lütfen tekrar dilimleyip baskıya gönderin." +msgid "Print file not found, please slice it again and send it for printing." +msgstr "" +"Yazdırma dosyası bulunamadı. Lütfen tekrar dilimleyip baskıya gönderin." msgid "" "Failed to upload print file to FTP. Please check the network status and try " @@ -2655,28 +3018,65 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Başarıyla gönderildi. %ss'de otomatik olarak bir sonraki sayfaya atlayacak" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "LAN yoluyla yazdırmadan önce bir SD kartın takılması gerekir." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Erişim kodu:%s IP adresi:%s" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" msgstr "LAN üzerinden gcode dosyası gönderiliyor" -msgid "Sending gcode file to sdcard" +msgid "Sending G-code file to SD card" msgstr "Gcode dosyası sdcard'a gönderiliyor" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Başarıyla gönderildi. %s s'de mevcut sayfayı kapat" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Yazıcıya göndermeden önce bir SD kartın takılması gerekir." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "SLA arşivi içe aktarılıyor" msgid "" -"The SLA archive doesn't contain any presets. Please activate some SLA printer " -"preset first before importing that SLA archive." +"The SLA archive doesn't contain any presets. Please activate some SLA " +"printer preset first before importing that SLA archive." msgstr "" "SLA arşivi herhangi bir ön ayar içermez. Lütfen SLA arşivini içe aktarmadan " "önce bazı SLA yazıcı ön ayarlarını etkinleştirin." @@ -2688,8 +3088,8 @@ msgid "Importing done." msgstr "İçe aktarma tamamlandı." msgid "" -"The imported SLA archive did not contain any presets. The current SLA presets " -"were used as fallback." +"The imported SLA archive did not contain any presets. The current SLA " +"presets were used as fallback." msgstr "" "İçe aktarılan SLA arşivi herhangi bir ön ayar içermiyordu. Geçerli SLA ön " "ayarları geri dönüş olarak kullanıldı." @@ -2709,11 +3109,11 @@ msgstr "İndiriliyor" msgid "Download failed" msgstr "Yükleme başarısız" -msgid "Cancelled" +msgid "Canceled" msgstr "İptal edildi" -msgid "Install successfully." -msgstr "Yükleme başarılı." +msgid "Installed successfully" +msgstr "Yükleme başarılı" msgid "Installing" msgstr "Yükleniyor" @@ -2736,8 +3136,8 @@ msgstr "Orca Dilimleyici şu lisansa sahiptir: " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero Genel Kamu Lisansı, sürüm 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca, PrusaSlicer ve BambuStudio’yu temel alır" msgid "Libraries" msgstr "Kütüphaneler" @@ -2746,22 +3146,20 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Bu yazılım, telif hakkı ve diğer mülkiyet hakları ilgili sahiplerine ait olan " -"açık kaynaklı bileşenleri kullanır" +"Bu yazılım, telif hakkı ve diğer mülkiyet hakları ilgili sahiplerine ait " +"olan açık kaynaklı bileşenleri kullanır" #, c-format, boost-format msgid "About %s" msgstr "Hakkında %s" -msgid "Snapmaker Orca " -msgstr "Orca Dilimleyici " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca, BambuStudio, PrusaSlicer ve SuperSlicer'ı temel alır." msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." msgstr "" -"BambuStudio orijinal olarak PrusaResearch'ün PrusaSlicer'ını temel almaktadır." +"BambuStudio orijinal olarak PrusaResearch'ün PrusaSlicer'ını temel " +"almaktadır." msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." msgstr "" @@ -2787,9 +3185,6 @@ msgstr "Onayla" msgid "Close" msgstr "Kapat" -msgid "Colour" -msgstr "Renk" - msgid "" "Nozzle\n" "Temperature" @@ -2810,9 +3205,6 @@ msgstr "Giriş değeri %1%'den büyük ve %2%'den küçük olmalıdır" msgid "SN" msgstr "SN" -msgid "Setting AMS slot information while printing is not supported" -msgstr "Yazdırma sırasında AMS yuvası bilgilerinin ayarlanması desteklenmiyor" - msgid "Factors of Flow Dynamics Calibration" msgstr "Akış Dinamiği Kalibrasyonunun Faktörleri" @@ -2825,6 +3217,9 @@ msgstr "Faktör K" msgid "Factor N" msgstr "Faktör N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Yazdırma sırasında AMS yuvası bilgilerinin ayarlanması desteklenmiyor" + msgid "Setting Virtual slot information while printing is not supported" msgstr "Yazdırma desteklenmediğinde Sanal yuva bilgilerinin ayarlanması" @@ -2840,7 +3235,17 @@ msgstr "Lütfen geçerli bir değer girin (K %.1f~%.1f içinde)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" -msgstr "Lütfen geçerli bir değer girin (K %.1f~%.1f içinde, N %.1f~%.1f içinde)" +msgstr "" +"Lütfen geçerli bir değer girin (K %.1f~%.1f içinde, N %.1f~%.1f içinde)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" msgid "Other Color" msgstr "Diğer renk" @@ -2852,9 +3257,9 @@ msgid "Dynamic flow calibration" msgstr "Dinamik akış kalibrasyonu" msgid "" -"The nozzle temp and max volumetric speed will affect the calibration results. " -"Please fill in the same values as the actual printing. They can be auto-" -"filled by selecting a filament preset." +"The nozzle temp and max volumetric speed will affect the calibration " +"results. Please fill in the same values as the actual printing. They can be " +"auto-filled by selecting a filament preset." msgstr "" "Nozul sıcaklığı ve maksimum hacimsel hız kalibrasyon sonuçlarını " "etkileyecektir. Lütfen gerçek yazdırmayla aynı değerleri girin. Bir filament " @@ -2875,15 +3280,9 @@ msgstr "Yatak Sıcaklığı" msgid "Max volumetric speed" msgstr "Maksimum hacimsel hız" -msgid "℃" -msgstr "°C" - msgid "Bed temperature" msgstr "Yatak Sıcaklığı" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "Kalibrasyonu başlat" @@ -2923,14 +3322,81 @@ msgid "Dynamic flow Calibration" msgstr "Dinamik akış kalibrasyonu" msgid "Step" -msgstr "Adım" +msgstr "Step" + +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" msgid "AMS Slots" msgstr "AMS Yuvaları" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "Sol AMS" + +msgid "External" +msgstr "Harici" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "Sağ AMS" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Nozul" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "Not: Yalnızca aynı malzeme türüne sahip AMS yuvaları seçilebilir." +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" msgstr "AMS'yi etkinleştir" @@ -2944,13 +3410,10 @@ msgstr "AMS'yi devre dışı bırak" msgid "Print with the filament mounted on the back of chassis" msgstr "Şasinin arkasına monte edilmiş filamentle yazdırma" -msgid "Current Cabin humidity" -msgstr "Mevcut Kabin nemi" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Lütfen kurutucuyu çok ıslandığında değiştirin. Gösterge aşağıdaki durumlarda " @@ -2959,10 +3422,10 @@ msgstr "" "yavaşlatır." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Yazdırma işinde kullanılan filament için hangi AMS yuvasının kullanılması " -"gerektiğini yapılandırma" +"gerektiğini yapılandırma." msgid "Filament used in this print job" msgstr "Bu yazdırma işinde kullanılan filament" @@ -2979,21 +3442,39 @@ msgstr "AMS'yi Etkinleştirme" msgid "Print using materials mounted on the back of the case" msgstr "Kasanın arkasına monte edilen malzemeleri kullanarak yazdırma" -msgid "Print with filaments in ams" -msgstr "Ams içerisindeki filamentlerle yazdırma" +msgid "Print with filaments in AMS" +msgstr "AMS içerisindeki filamentlerle yazdırma" msgid "Print with filaments mounted on the back of the chassis" msgstr "Kasanın arkasına monte edilmiş filamentler ile yazdırma" +msgid "Auto Refill" +msgstr "Otomatik Doldurma" + +msgid "Left" +msgstr "Sol" + +msgid "Right" +msgstr "Sağ" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "" -"Mevcut malzeme bittiğinde yazıcı aşağıdaki sırayla yazdırmaya devam edecektir." +"Mevcut malzeme bittiğinde yazıcı aşağıdaki sırayla yazdırmaya devam " +"edecektir." + +msgid "Identical filament: same brand, type and color" +msgstr "" msgid "Group" msgstr "Grup" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Yazıcı şu anda otomatik yeniden doldurmayı desteklemiyor." @@ -3004,15 +3485,10 @@ msgstr "" "etkinleştirin." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Eğer AMS'de iki aynı filament bulunursa, AMS filament yedekleme özelliği " -"etkinleştirilecektir. \n" -"(Şu anda aynı markaya ait sarf malzemelerinin otomatik temini " -"desteklenmektedir, malzeme türü ve rengi)" msgid "DRY" msgstr "KURU" @@ -3027,14 +3503,14 @@ msgid "Insertion update" msgstr "Ekleme güncellemesi" msgid "" -"The AMS will automatically read the filament information when inserting a new " -"Bambu Lab filament. This takes about 20 seconds." +"The AMS will automatically read the filament information when inserting a " +"new Bambu Lab filament. This takes about 20 seconds." msgstr "" "AMS, yeni bir Bambu Lab filamenti takıldığında filament bilgilerini otomatik " "olarak okuyacaktır. Bu yaklaşık 20 saniye sürer." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Not: Yazdırma sırasında yeni bir filaman takılırsa AMS, yazdırma tamamlanana " @@ -3051,16 +3527,17 @@ msgid "Power on update" msgstr "Güncellemeyi aç" msgid "" -"The AMS will automatically read the information of inserted filament on start-" -"up. It will take about 1 minute.The reading process will roll filament spools." +"The AMS will automatically read the information of inserted filament on " +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS, başlangıçta takılan filamentin bilgilerini otomatik olarak okuyacaktır. " "Yaklaşık 1 dakika sürecektir. Okuma işlemi filament makaralarını saracaktır." msgid "" -"The AMS will not automatically read information from inserted filament during " -"startup and will continue to use the information recorded before the last " -"shutdown." +"The AMS will not automatically read information from inserted filament " +"during startup and will continue to use the information recorded before the " +"last shutdown." msgstr "" "AMS, başlatma sırasında takılan filamentden bilgileri otomatik olarak okumaz " "ve son kapatmadan önce kaydedilen bilgileri kullanmaya devam eder." @@ -3069,23 +3546,19 @@ msgid "Update remaining capacity" msgstr "Kalan kapasiteyi güncelle" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS, filament bilgisi güncellendikten sonra Bambu filamentin kalan " -"kapasitesini tahmin edecek. Yazdırma sırasında kalan kapasite otomatik olarak " -"güncellenecektir." msgid "AMS filament backup" msgstr "AMS filament yedeklemesi" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS, mevcut filament bittiğinde otomatik olarak aynı özelliklere sahip başka " -"bir makaraya devam edecektir" +"bir makaraya devam edecektir." msgid "Air Printing Detection" msgstr "Hava Baskısı Algılama" @@ -3107,8 +3580,8 @@ msgid "" "Failed to download the plug-in. Please check your firewall settings and vpn " "software, check and retry." msgstr "" -"Eklenti indirilemedi. Lütfen güvenlik duvarı ayarlarınızı ve vpn yazılımınızı " -"kontrol edin, kontrol edip yeniden deneyin." +"Eklenti indirilemedi. Lütfen güvenlik duvarı ayarlarınızı ve vpn " +"yazılımınızı kontrol edin, kontrol edip yeniden deneyin." msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " @@ -3140,10 +3613,14 @@ msgstr "" "Bir hata oluştu. Belki sistemin hafızası yeterli değildir veya programın bir " "hatasıdır" -msgid "Please save project and restart the program. " -msgstr "Lütfen projeyi kaydedin ve programı yeniden başlatın. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Ölümcül bir hata oluştu: “%1%”" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Lütfen projeyi kaydedin ve programı yeniden başlatın." + +msgid "Processing G-code from Previous file..." msgstr "Önceki dosyadan G Kodu işleniyor..." msgid "Slicing complete" @@ -3165,10 +3642,10 @@ msgid "Underflow" msgstr "Düşük Akış" msgid "Floating reserved operand" -msgstr "Floating reserved operand" +msgstr "Geçersiz kayan noktalı değer" msgid "Stack overflow" -msgstr "Stack overflow" +msgstr "Yığın taşması" msgid "Running post-processing scripts" msgstr "İşlem sonrası komut dosyalarını çalıştırma" @@ -3176,7 +3653,7 @@ msgstr "İşlem sonrası komut dosyalarını çalıştırma" msgid "Successfully executed post-processing script" msgstr "İşlem sonrası komut dosyası başarıyla çalıştırıldı" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "G kodu dışa aktarılırken bilinmeyen bir hata oluştu." #, boost-format @@ -3196,8 +3673,8 @@ msgid "" "device. The corrupted output G-code is at %1%.tmp." msgstr "" "Geçici G kodunun çıkış G koduna kopyalanması başarısız oldu. Hedef cihazda " -"sorun olabilir, lütfen tekrar dışa aktarmayı veya farklı bir cihaz kullanmayı " -"deneyin. Bozuk çıktı G kodu %1%.tmp konumunda." +"sorun olabilir, lütfen tekrar dışa aktarmayı veya farklı bir cihaz " +"kullanmayı deneyin. Bozuk çıktı G kodu %1%.tmp konumunda." #, boost-format msgid "" @@ -3227,12 +3704,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "G kodu dosyası %1%’e aktarıldı" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "G kodunu dışa aktarırken bilinmeyen hata." #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3249,226 +3726,6 @@ msgstr "" "\"%1%\" hedefine yükleme planlanıyor. Bkz. Pencere -> Ana Bilgisayar Yükleme " "Sırasını Yazdır" -msgid "Device" -msgstr "Cihaz" - -msgid "Task Sending" -msgstr "Görev Gönderme" - -msgid "Task Sent" -msgstr "Görev Gönderildi" - -msgid "Edit multiple printers" -msgstr "Birden fazla yazıcıyı düzenleme" - -msgid "Select connected printers (0/6)" -msgstr "Bağlı yazıcıları seçin (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Bağlı Yazıcıları Seçin (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "Seçilebilecek maksimum yazıcı sayısı %d'dır" - -msgid "Offline" -msgstr "Çevrimdışı" - -msgid "No task" -msgstr "Görev yok" - -msgid "View" -msgstr "Görünüm" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "Yazıcıları Düzenle" - -msgid "Device Name" -msgstr "Cihaz Adı" - -msgid "Task Name" -msgstr "Görev Adı" - -msgid "Device Status" -msgstr "Cihaz Durumu" - -msgid "Actions" -msgstr "İşlemler" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "Lütfen buradan yönetmek istediğiniz cihazları seçin (en fazla 6 cihaz)" - -msgid "Add" -msgstr "Ekle" - -msgid "Idle" -msgstr "Boşta" - -msgid "Printing" -msgstr "Baskı" - -msgid "Upgrading" -msgstr "Yükseltiliyor" - -msgid "Incompatible" -msgstr "Uyumsuz" - -msgid "syncing" -msgstr "Senkronize ediliyor" - -msgid "Printing Finish" -msgstr "Yazdırma Bitti" - -msgid "Printing Failed" -msgstr "Yazdırma Başarısız" - -msgid "Printing Pause" -msgstr "Yazdırma Duraklatıldı" - -msgid "Prepare" -msgstr "Hazırlık" - -msgid "Slicing" -msgstr "Dilimleniyor" - -msgid "Pending" -msgstr "Askıda" - -msgid "Sending" -msgstr "Gönderiliyor" - -msgid "Sending Finish" -msgstr "Gönderme Bitti" - -msgid "Sending Cancel" -msgstr "Gönderme İptal Oldu" - -msgid "Sending Failed" -msgstr "Gönderim Başarısız" - -msgid "Print Success" -msgstr "Yazdırma Başarılı" - -msgid "Print Failed" -msgstr "Yazdırma Başarısız" - -msgid "Removed" -msgstr "Kaldırıldı" - -msgid "Resume" -msgstr "Sürdür" - -msgid "Stop" -msgstr "Durdur" - -msgid "Task Status" -msgstr "Görev durumu" - -msgid "Sent Time" -msgstr "Gönderilen Zaman" - -msgid "There are no tasks to be sent!" -msgstr "Gönderilecek görev yok!" - -msgid "No historical tasks!" -msgstr "Tarihi görevler yok!" - -msgid "Loading..." -msgstr "Yükleniyor..." - -msgid "No AMS" -msgstr "AMS Yok" - -msgid "Send to Multi-device" -msgstr "Çoklu cihaza gönder" - -msgid "Preparing print job" -msgstr "Yazdırma için hazırlanıyor" - -msgid "Abnormal print file data. Please slice again" -msgstr "Anormal yazdırma dosyası verileri. Lütfen tekrar dilimleyin" - -msgid "There is no device available to send printing." -msgstr "Baskı göndermek için kullanılabilir bir cihaz yok." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "Aynı anda kullanımda olan yazıcı sayısı 0'a eşit olamaz." - -msgid "Use External Spool" -msgstr "Harici Makara Kullanın" - -msgid "Use AMS" -msgstr "AMS kullanın" - -msgid "Select Printers" -msgstr "Yazıcıları Seçin" - -msgid "Ams Status" -msgstr "Ams Durumu" - -msgid "Printing Options" -msgstr "Yazdırma Seçenekleri" - -msgid "Bed Leveling" -msgstr "Yatak Tesviyesi" - -msgid "Timelapse" -msgstr "Timelapse" - -msgid "Flow Dynamic Calibration" -msgstr "Akış Dinamik Kalibrasyonu" - -msgid "Send Options" -msgstr "Gönderme Seçenekleri" - -msgid "Send to" -msgstr "Gönderildi" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo heating " -"at the same time.)" -msgstr "" -"aynı anda kaç yazıcının ısıtma işleminden geçebileceği, aynı anda " -"ısıtılabilecek cihaz sayısına bağlıdır." - -msgid "Wait" -msgstr "Bekleyin" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"her parti başına dakika. (Isıtmanın tamamlanması ne kadar sürerse buna " -"bağlıdır.)" - -msgid "Send" -msgstr "Gönder" - -msgid "Name is invalid;" -msgstr "Geçersiz isim;" - -msgid "illegal characters:" -msgstr "yasadışı karakterler:" - -msgid "illegal suffix:" -msgstr "yasadışı sonek:" - -msgid "The name is not allowed to be empty." -msgstr "Ad alanı boş bırakılamaz." - -msgid "The name is not allowed to start with space character." -msgstr "Adın boşluk karakteriyle başlamasına izin verilmez." - -msgid "The name is not allowed to end with space character." -msgstr "Adın boşluk karakteriyle bitmesine izin verilmez." - -msgid "The name length exceeds the limit." -msgstr "Ad uzunluğu sınırı aşıyor." - msgid "Origin" msgstr "Konum" @@ -3534,12 +3791,13 @@ msgstr "Yatak modelini içe aktarmak için bir STL dosyası seçin:" msgid "Bed Shape" msgstr "Yatak Şekli" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Önerilen minimum sıcaklık 190 dereceden azdır veya önerilen maksimum sıcaklık " -"300 dereceden yüksektir.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3561,42 +3819,42 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Bu filament tipinin tavsiye edilen Nozul sıcaklığı [%d, %d] derece " -"santigrattır" +"santigrattır." msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Maksimum hacimsel hız çok küçük.\n" -"0,5'e sıfırla" +"0,5'e sıfırla." #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature,it " -"may result in material softening and clogging.The maximum safe temperature " -"for the material is %d" +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " +"temperature for the material is %d" msgstr "" -"Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, malzemenin " -"yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum güvenli " -"sıcaklık %d'dir" +"Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " +"malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " +"güvenli sıcaklık %d'dir" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Katman yüksekliği çok küçük.\n" -"0,2'ye sıfırla" +"0,2'ye sıfırla." msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Çok küçük ütüleme aralığı.\n" -"0,1'e sıfırla" +"0,1'e sıfırla." msgid "" "Zero initial layer height is invalid.\n" @@ -3636,19 +3894,19 @@ msgstr "" "Değer 0'a sıfırlanacaktır." msgid "" -"Alternate extra wall does't work well when ensure vertical shell thickness is " -"set to All. " +"Alternate extra wall does't work well when ensure vertical shell thickness " +"is set to All." msgstr "" -"Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak ayarlandığından " -"emin olunduğunda iyi çalışmaz. " +"Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak " +"ayarlandığından emin olunduğunda iyi çalışmaz." msgid "" -"Change these settings automatically? \n" -"Yes - Change ensure vertical shell thickness to Moderate and enable alternate " -"extra wall\n" -"No - Dont use alternate extra wall" +"Change these settings automatically?\n" +"Yes - Change ensure vertical shell thickness to Moderate and enable " +"alternate extra wall\n" +"No - Don't use alternate extra wall" msgstr "" -"Bu ayarlar otomatik olarak değiştirilsin mi? \n" +"Bu ayarlar otomatik olarak değiştirilsin mi?\n" "Evet - Dikey kabuk kalınlığını Orta olarak değiştirin ve alternatif ekstra " "duvarı etkinleştirin\n" "Hayır - Alternatif ekstra duvar kullanmayın" @@ -3689,50 +3947,71 @@ msgstr "" "EVET - Prime Tower'ı Koruyun\n" "HAYIR - Bağımsız Destek Katmanı Yüksekliğini Koruyun" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Nesne ile yazdırma sırasında ekstruder etekle çarpışabilir.\n" -"Bu durumu önlemek için etek katmanını 1'e sıfırlayın." - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" -"Dikiş eğimi başlangıç ​​yüksekliğinin katman yüksekliğinden daha küçük olması " +"Dikiş eğimi başlangıç yüksekliğinin katman yüksekliğinden daha küçük olması " "gerekir.\n" "0 a sıfırla." +#, fuzzy, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"Kilit derinliği cilt derinliğinden daha küçük olmalıdır.\n" +"Cilt derinliğinin %50'sine sıfırlayın." + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Pütürlü yüzeyin hem [Ekstrüzyon] hem de [Kombine] modları, Arachne Duvarı " +"Üreticisinin etkinleştirilmesini gerektirir." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Bu ayarlar otomatik olarak değiştirilsin mi?\n" +"Evet - Arachne Duvarı Oluşturucusunu Etkinleştir\n" +"Hayır - Arachne Duvarı Oluşturucusunu Devre Dışı Bırak ve Pütürlü Yüzey [Yer " +"Değiştirme] modunu ayarla" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Spiral mod yalnızca duvar döngüleri 1 olduğunda, destek devre dışı " -"bırakıldığında, üst kabuk katmanları 0 olduğunda, seyrek dolgu yoğunluğu 0 " -"olduğunda ve timelapse türü geleneksel olduğunda çalışır." msgid " But machines with I3 structure will not generate timelapse videos." msgstr "" " Ancak I3 yapısına sahip yazıcılar timelapse videolar oluşturmayacaktır." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" "Bu ayarlar otomatik olarak değiştirilsin mi?\n" -"Evet - Bu ayarları değiştirin ve spiral modunu otomatik olarak etkinleştirin\n" +"Evet - Bu ayarları değiştirin ve spiral modunu otomatik olarak " +"etkinleştirin\n" "Hayır - Bu sefer spiral modunu kullanmaktan vazgeçin" +msgid "Printing" +msgstr "Baskı" + msgid "Auto bed leveling" -msgstr "Otomatik yatak tesviyesi" +msgstr "Otomatik plaka tesviyesi" msgid "Heatbed preheating" msgstr "Isıtma yatağı ön ısıtması" -msgid "Sweeping XY mech mode" -msgstr "Süpürme XY mekanik modu" +msgid "Vibration compensation" +msgstr "Titreşim dengeleme" msgid "Changing filament" msgstr "Filament Değişimi" @@ -3740,14 +4019,14 @@ msgstr "Filament Değişimi" msgid "M400 pause" msgstr "M400 duraklatma" -msgid "Paused due to filament runout" -msgstr "Filament bittiği için duraklatıldı" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Hotend ısıtılıyor" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Ekstrüzyon kalibre ediliyor" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Yatak yüzeyi taranıyor" @@ -3770,78 +4049,138 @@ msgstr "Nozul temizleme ipucu" msgid "Checking extruder temperature" msgstr "Ekstruder sıcaklığının kontrol edilmesi" -msgid "Printing was paused by the user" -msgstr "Yazdırma kullanıcı tarafından duraklatıldı" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Ön kapağın düşmesinin duraklaması" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Mikro Lida'nın kalibre edilmesi" -msgid "Calibrating extrusion flow" -msgstr "Ekstrüzyon akışını kalibre et" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Nozul sıcaklığı arızası nedeniyle duraklatıldı" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Isı yatağı sıcaklık arızası nedeniyle duraklatıldı" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Filament boşaltma" -msgid "Skip step pause" -msgstr "Adım duraklamasını atla" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Filament yükleme" -msgid "Motor noise calibration" -msgstr "Motor ses kalibrasyonu" +msgid "Motor noise cancellation" +msgstr "Motor gürültüsü engelleme" -msgid "Paused due to AMS lost" -msgstr "AMS kaybı nedeniyle durduruldu" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Isı kesme fanının düşük hızı nedeniyle duraklatıldı" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Oda sıcaklığı kontrol hatası nedeniyle duraklatıldı" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Soğutma haznesi" -msgid "Paused by the Gcode inserted by user" -msgstr "Kullanıcı tarafından eklenen Gcode tarafından duraklatıldı" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Motor gürültü gösterimi" -msgid "Nozzle filament covered detected pause" -msgstr "Nozul filament ile kaplı algılandı duraklatılıyor" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Kesici hatası duraklatılıyor" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "İlk katman hatası duraklatılıyor" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Nozul tıkanıklığı duraklatılıyor" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Bilinmeyen" -msgid "Fatal" -msgstr "Kritik" - -msgid "Serious" -msgstr "Ciddi" - -msgid "Common" -msgstr "Yaygın" - msgid "Update successful." msgstr "Güncelleme başarılı." @@ -3854,37 +4193,61 @@ msgstr "Doğrulama başarısız oldu." msgid "Update failed." msgstr "Güncelleme başarısız." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds 45℃." -"In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is " -"not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"Mevcut hazne sıcaklığı veya hedef hazne sıcaklığı 45 ° C'yi aşıyor Ekstruder " -"tıkanmasını önlemek için düşük sıcaklıkta filament (PLA / PETG / TPU) " -"yüklenmesine izin verilmez." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Ekstrudere düşük sıcaklıkta filament (PLA / PETG / TPU) yüklendi. Ekstruder " -"tıkanmasını önlemek için hazne sıcaklığının 45 ° C'nin üzerine ayarlanmasına " -"izin verilmez." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Hazne sıcaklığını 40°C'nin altına ayarladığınızda, hazne sıcaklık kontrolü " "etkinleştirilmeyecektir. Ve hedef hazne sıcaklığı otomatik olarak 0°C'ye " "ayarlanacaktır." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Yazdırma işi başlatılamadı" -msgid "This calibration does not support the currently selected nozzle diameter" +msgid "" +"This calibration does not support the currently selected nozzle diameter" msgstr "Bu kalibrasyon, şu anda seçilen nozzle çapını desteklememektedir" msgid "Current flowrate cali param is invalid" @@ -3893,31 +4256,77 @@ msgstr "Geçerli akış hızı cali parametresi geçersiz" msgid "Selected diameter and machine diameter do not match" msgstr "Seçilen çap ile makine çapı eşleşmiyor" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Cali G-code oluşturma başarısız oldu" msgid "Calibration error" msgstr "Kalibrasyon hatası" -msgid "TPU is not supported by AMS." -msgstr "TPU, AMS tarafından desteklenmez." +msgid "Resume Printing" +msgstr "Yazdırmaya Devam Et" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF, AMS tarafından desteklenNozulktedir." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Nemli PVA esnekleşecek ve AMS'nin içine sıkışacaktır, lütfen kullanmadan önce " -"kurutmaya dikkat edin." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in AMS, " -"please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Yazdırmayı Durdur" + +msgid "Check Assistant" +msgstr "Kontrol Asistanı" + +msgid "Filament Extruded, Continue" +msgstr "Filament Ekstrüde Edildi, Devam Et" + +msgid "Not Extruded Yet, Retry" +msgstr "Henüz Ekstrüde Edilmedi, Tekrar Deneyin" + +msgid "Finished, Continue" +msgstr "Bitti, Devam Et" + +msgid "Load Filament" +msgstr "Filament Yükle" + +msgid "Filament Loaded, Resume" +msgstr "Filament Yüklendi, Devam Et" + +msgid "View Liveview" +msgstr "Canlı Önizlemeyi Görüntüle" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Tamamlandı" + +msgid "Retry" +msgstr "Yeniden dene" + +msgid "Resume" +msgstr "Sürdür" + +msgid "Unknown error." msgstr "" -"CF/GF filamentleri sert ve kırılgandır. AMS'de kırılması veya sıkışması " -"kolaydır, lütfen dikkatli kullanın." msgid "default" msgstr "varsayılan" @@ -3929,7 +4338,7 @@ msgstr "Özel G Kodunu Düzenle (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Yerleşik yer tutucular (G koduna eklemek için öğeye çift tıklayın)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Gcode yer tutucularını arayın" msgid "Add selected placeholder to G-code" @@ -3988,7 +4397,7 @@ msgid "parameter name" msgstr "parametre adı" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s yüzde olamaz" #, c-format, boost-format @@ -4027,10 +4436,29 @@ msgstr "Girilen değer limit dışı" msgid "Some extension in the input is invalid" msgstr "Girilen bazı uzantılar geçersiz" +msgid "This parameter expects a valid template." +msgstr "Bu parametre geçerli bir şablon bekliyor." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" +"Geçersiz kalıp. N, N#K veya giriş başına isteğe bağlı #K ile virgülle " +"ayrılmış bir liste kullanın. Örnekler: 5, 5#2, 1,7,9, 5,9#2,18." + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Geçersiz format. Beklenen vektör formatı: \"%1%\"" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "Seç" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "Katman Yüksekliği" @@ -4040,9 +4468,6 @@ msgstr "Katman Genişliği" msgid "Fan Speed" msgstr "Fan hızı" -msgid "Temperature" -msgstr "Sıcaklık" - msgid "Flow" msgstr "Akış" @@ -4076,7 +4501,7 @@ msgstr "Fan: " msgid "Temperature: " msgstr "Sıcaklık: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "G kodları yükleniyor" msgid "Generating geometry vertex data" @@ -4109,6 +4534,72 @@ msgstr "Toplam süre" msgid "Total cost" msgstr "Toplam tutar" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "İpuçları:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "İpuçları" + msgid "up to" msgstr "kadar" @@ -4118,17 +4609,11 @@ msgstr "üstünde" msgid "from" msgstr "itibaren" -msgid "Color Scheme" -msgstr "Renk Şeması" - msgid "Time" msgstr "Zaman" -msgid "Percent" -msgstr "Yüzde" - -msgid "Used filament" -msgstr "Kullanılan" +msgid "Usage" +msgstr "Kullan" msgid "Layer Height (mm)" msgstr "Katman Yüksekliği (mm)" @@ -4175,12 +4660,12 @@ msgstr "seyahat" msgid "Extruder" msgstr "Ekstruder" -msgid "Filament change times" -msgstr "Filament değişim süreleri" - msgid "Cost" msgstr "Maliyet" +msgid "Filament change times" +msgstr "Filament değişim süreleri" + msgid "Color change" msgstr "Renk değişimi" @@ -4190,10 +4675,7 @@ msgstr "Yazdır" msgid "Printer" msgstr "Yazıcı" -msgid "Custom g-code" -msgstr "Özel g-code" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Araç Değiştirme" msgid "Time Estimation" @@ -4206,7 +4688,7 @@ msgid "Total Filament" msgstr "Toplam filament" msgid "Model Filament" -msgstr "Model Filament" +msgstr "Model filament" msgid "Prepare time" msgstr "Hazırlık süresi" @@ -4220,6 +4702,23 @@ msgstr "Sessiz moda geç" msgid "Switch to normal mode" msgstr "Normal moda geç" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"Bir nesne plakanın sınırının üzerine yerleştirilmiş veya yükseklik sınırını " +"aşıyor.\n" +"Lütfen nesneyi tamamen plakanın üzerine veya dışına taşıyarak ve yüksekliğin " +"yapı hacmi içinde olduğundan emin olarak sorunu çözün." + msgid "Variable layer height" msgstr "Değişken katman yüksekliği" @@ -4238,27 +4737,15 @@ msgstr "Yarıçap" msgid "Keep min" msgstr "Min. tut" -msgid "Left mouse button:" -msgstr "Sol fare tuşu:" - msgid "Add detail" msgstr "Ayrıntı ekle" -msgid "Right mouse button:" -msgstr "Sağ fare tuşu:" - msgid "Remove detail" msgstr "Ayrıntıyı kaldır" -msgid "Shift + Left mouse button:" -msgstr "Shift + Sol fare düğmesi:" - msgid "Reset to base" msgstr "Tabana sıfırla" -msgid "Shift + Right mouse button:" -msgstr "Shift + Sağ fare düğmesi:" - msgid "Smoothing" msgstr "Pürüzsüzleştirme" @@ -4271,6 +4758,55 @@ msgstr "Düzenleme alanını artır/azalt" msgid "Sequence" msgstr "Sekans" +msgid "object selection" +msgstr "nesne seçimi" + +msgid "part selection" +msgstr "parça seçimi" + +msgid "number keys" +msgstr "sayı tuşları" + +msgid "number keys can quickly change the color of objects" +msgstr "Sayı tuşları nesnelerin rengini hızla değiştirebilir" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Nesneyi Aynala" @@ -4316,11 +4852,25 @@ msgstr "Ekstrüzyon kalibrasyon bölgesinden kaçın" msgid "Align to Y axis" msgstr "Y eksenine hizala" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Ekle" + msgid "Add plate" msgstr "Plaka ekle" -msgid "Auto orient" -msgstr "Otomatik yönlendir" +msgid "Auto orient all/selected objects" +msgstr "Otomatik yönlendir tüm/seçili nesneler" + +msgid "Auto orient all objects on current plate" +msgstr "Geçerli plakadaki tüm nesneleri otomatik yönlendir" msgid "Arrange all objects" msgstr "Tüm nesneleri hizala" @@ -4340,11 +4890,29 @@ msgstr "Montaj görünümü" msgid "Select Plate" msgstr "Plaka Seç" +msgid "Slicing" +msgstr "Dilimleniyor" + +msgid "Slice all" +msgstr "Hepsini dilimle" + +msgid "Failed" +msgstr "Başarısız" + +msgid "All Plates" +msgstr "Tüm Plakalar" + +msgid "Stats" +msgstr "İstatistikler" + msgid "Assembly Return" msgstr "Montaj İptali" -msgid "return" -msgstr "geri dön" +msgid "Return" +msgstr "Geri dön" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Boyama Araç Çubuğu" @@ -4358,6 +4926,9 @@ msgstr "Bölüm Görünümü" msgid "Assemble Control" msgstr "Montaj Kontrolü" +msgid "Selection Mode" +msgstr "Seçim Modu" + msgid "Total Volume:" msgstr "Toplam Hacim:" @@ -4372,32 +4943,71 @@ msgstr "Boyut:" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"%d katmanında gcode yollarında çakışmalar bulundu, z = %.2lf mm. Lütfen " +"%d katmanında gcode yollarında çakışmalar bulundu, Z = %.2lfmm. Lütfen " "çakışan nesneleri daha uzağa ayırın (%s <-> %s)." -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "Plakanın sınırına bir nesne serilir." msgid "A G-code path goes beyond the max print height." msgstr "Bir G kodu yolu maksimum baskı yüksekliğinin ötesine geçer." -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "Bir G kodu yolu plakanın sınırlarının ötesine geçer." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Yalnızca düzenlenen nesne görünür." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Plaka sınırının üzerine bir nesne döşenir veya yükseklik sınırını aşar.\n" -"Lütfen sorunu tamamen plakanın üzerine veya dışına hareket ettirerek ve " -"yüksekliğin yapım hacmi dahilinde olduğunu doğrulayarak çözün." msgid "Calibration step selection" msgstr "Kalibrasyon adımı seçimi" @@ -4408,11 +5018,8 @@ msgstr "Mikro lidar kalibrasyonu" msgid "Bed leveling" msgstr "Yatak Seviyeleme" -msgid "Vibration compensation" -msgstr "Titreşim dengeleme" - -msgid "Motor noise cancellation" -msgstr "Motor gürültüsü engelleme" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Kalibrasyon programı" @@ -4465,24 +5072,21 @@ msgstr "Özel kamera kaynağı" msgid "Show \"Live Video\" guide page." msgstr "\"Canlı Video\" kılavuz sayfasını gösterin." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" -msgstr "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" +msgstr "Connect Printer (LAN)" msgid "Please input the printer access code:" msgstr "Lütfen yazıcı erişim kodunu girin:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Bunu \"Ayarlar > Ağ > Bağlantı kodu\" bölümünde bulabilirsiniz.\n" -"şekilde gösterildiği gibi yazıcıda:" msgid "Invalid input." msgstr "Geçersiz Giriş." @@ -4502,9 +5106,15 @@ msgstr "Bazı ön ayarlar değiştirilirken Uygulama kapatılıyor." msgid "Logging" msgstr "Günlük kaydı" +msgid "Prepare" +msgstr "Hazırlık" + msgid "Preview" msgstr "Ön İzleme" +msgid "Device" +msgstr "Cihaz" + msgid "Multi-device" msgstr "Çoklu cihaz" @@ -4527,12 +5137,12 @@ msgstr "Plakayı dilimle" msgid "Print plate" msgstr "Plakayı Yazdır" -msgid "Slice all" -msgstr "Hepsini dilimle" - msgid "Export G-code file" msgstr "G-kod dosyasını dışa aktar" +msgid "Send" +msgstr "Gönder" + msgid "Export plate sliced file" msgstr "Dilimlenmiş plaka dosyasını dışa aktar" @@ -4545,6 +5155,9 @@ msgstr "Tümünü yazdır" msgid "Send all" msgstr "Hepsini gönder" +msgid "Send to Multi-device" +msgstr "Çoklu cihaza gönder" + msgid "Keyboard Shortcuts" msgstr "Klavye kısayolları" @@ -4579,10 +5192,6 @@ msgstr "Modelleri İndir" msgid "Default View" msgstr "Varsayılan görünüm" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Üst" - msgid "Top View" msgstr "Üstten görünüm" @@ -4605,15 +5214,9 @@ msgstr "Arka" msgid "Rear View" msgstr "Arkadan Görünüm" -msgid "Left" -msgstr "Sol" - msgid "Left View" msgstr "Soldan Görünüm" -msgid "Right" -msgstr "Sağ" - msgid "Right View" msgstr "Sağdan Görünüm" @@ -4629,8 +5232,8 @@ msgstr "Yeni bir proje başlat" msgid "Open a project file" msgstr "Proje dosyasını aç" -msgid "Recent projects" -msgstr "Son Projeler" +msgid "Recent files" +msgstr "Son dosyalar" msgid "Save Project" msgstr "Projeyi Kaydet" @@ -4641,9 +5244,6 @@ msgstr "Mevcut projeyi dosyaya kaydet" msgid "Save Project as" msgstr "Projeyi farklı kaydet" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "Mevcut projeyi farklı kaydet" @@ -4677,8 +5277,8 @@ msgstr "Tüm nesneleri STLs olarak dışa aktarın" msgid "Export Generic 3MF" msgstr "Genel 3MF olarak dışa aktar" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "3mf dosyasını bazı 3mf uzantılarını kullanmadan dışa aktarın" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "3mf dosyasını bazı 3MF uzantılarını kullanmadan dışa aktarın" msgid "Export current sliced file" msgstr "Geçerli dilimlenmiş dosyayı dışa aktar" @@ -4692,6 +5292,9 @@ msgstr "G-kodunu dışa aktar" msgid "Export current plate as G-code" msgstr "Geçerli plakayı G kodu olarak dışa aktar" +msgid "Export toolpaths as OBJ" +msgstr "Takımyollarını OBJ olarak dışa aktar" + msgid "Export Preset Bundle" msgstr "Ön Ayar Paketini Dışa Aktar" @@ -4743,6 +5346,12 @@ msgstr "Seçili olanı klonla" msgid "Clone copies of selections" msgstr "Seçimlerin kopyalarını kopyala" +msgid "Duplicate Current Plate" +msgstr "Geçerli plakayı çoğalt" + +msgid "Duplicate the current plate" +msgstr "Geçerli plakayı çoğalt" + msgid "Select all" msgstr "Hepsini seç" @@ -4761,17 +5370,27 @@ msgstr "Perspektif Görünüm" msgid "Use Orthogonal View" msgstr "Ortogonal Görünüm" +msgid "Auto Perspective" +msgstr "Otomatik Perspektif" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Üst/Alt/Yan görünümler arasında geçiş yaparken ortografik ve perspektif " +"arasında otomatik olarak geçiş yapın." + msgid "Show &G-code Window" msgstr "&G-code Penceresini Göster" -msgid "Show g-code window in Previce scene" -msgstr "Previce sahnesinde G-kodu penceresini göster" +msgid "Show G-code window in Preview scene." +msgstr "Previce sahnesinde G-kodu penceresini göster." msgid "Show 3D Navigator" msgstr "3D Gezgini Göster" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "Hazırlama ve Önizleme sahnesinde 3D gezgini göster" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Hazırlama ve Önizleme sahnesinde 3D gezgini göster." msgid "Reset Window Layout" msgstr "Pencere Düzenini Sıfırla" @@ -4782,18 +5401,27 @@ msgstr "Varsayılan pencere düzenine sıfırla" msgid "Show &Labels" msgstr "Etiketleri Göster" -msgid "Show object labels in 3D scene" -msgstr "3B sahnede nesne etiketlerini göster" +msgid "Show object labels in 3D scene." +msgstr "3B sahnede nesne etiketlerini göster." msgid "Show &Overhang" msgstr "Çıkıntıyı Göster" -msgid "Show object overhang highlight in 3D scene" -msgstr "3B sahnede nesne çıkıntısı vurgusunu göster" +msgid "Show object overhang highlight in 3D scene." +msgstr "3B sahnede nesne çıkıntısı vurgusunu göster." + +msgid "Show Selected Outline (beta)" +msgstr "Seçilen Taslağı Göster (Deneysel)" + +msgid "Show outline around selected object in 3D scene." +msgstr "3D sahnede seçilen nesnenin etrafındaki ana hatları göster." msgid "Preferences" msgstr "Tercihler" +msgid "View" +msgstr "Görünüm" + msgid "Help" msgstr "Yardım" @@ -4812,36 +5440,54 @@ msgstr "Geçiş 2" msgid "Flow rate test - Pass 2" msgstr "Akış hızı testi - Geçiş 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (Önerilen)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO akış hızı kalibrasyonu, 0,01 adım" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (Mükemmeliyetçi)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO akış hızı kalibrasyonu, 0,005 adım" + msgid "Flow rate" msgstr "Akış hızı" msgid "Pressure advance" -msgstr "Basınç avansı" +msgstr "Basınç avansı oranı" msgid "Retraction test" msgstr "Geri çekme testi" -msgid "Orca Tolerance Test" -msgstr "Orca tolerans testi" - msgid "Max flowrate" msgstr "Maksimum akış hızı" +msgid "Cornering" +msgstr "Köşe dönüşü" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "Input shaping Frekansı" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Input shaping Sönümleme/zeta faktörü" + +msgid "Input Shaping" +msgstr "Input shaping" + msgid "VFA" msgstr "VFA" -msgid "More..." -msgstr "Daha fazla..." - msgid "Tutorial" msgstr "Öğretici" msgid "Calibration help" msgstr "Kalibrasyon yardımı" -msgid "More calibrations" -msgstr "Daha fazla kalibrasyon" - msgid "&Open G-code" msgstr "&G kodunu aç" @@ -4857,9 +5503,6 @@ msgstr "Plakalayıcıyı diskten yeniden yükle" msgid "Export &Toolpaths as OBJ" msgstr "&Takımyollarını OBJ olarak dışa aktar" -msgid "Export toolpaths as OBJ" -msgstr "Takımyollarını OBJ olarak dışa aktar" - msgid "Open &Slicer" msgstr "&Stüdyo'yu aç" @@ -4883,16 +5526,19 @@ msgid "&Help" msgstr "&Yardım" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Aynı adda bir dosya var: %s, üzerine yazmak istiyor musunuz." +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Aynı adda bir dosya var: %s, üzerine yazmak istiyor musunuz?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Aynı adda bir yapılandırma mevcut: %s, üzerine yazmak istiyor musunuz." +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Aynı adda bir yapılandırma mevcut: %s, üzerine yazmak istiyor musunuz?" msgid "Overwrite file" msgstr "Dosyanın üzerine yaz" +msgid "Overwrite config" +msgstr "Yapılandırmanın üzerine yaz" + msgid "Yes to All" msgstr "Tümüne evet" @@ -4929,8 +5575,8 @@ msgstr[1] "" msgid "" "\n" -"Hint: Make sure you have added the corresponding printer before importing the " -"configs." +"Hint: Make sure you have added the corresponding printer before importing " +"the configs." msgstr "" "\n" "İpucu: Yapılandırmaları içe aktarmadan önce ilgili yazıcıyı eklediğinizden " @@ -4949,7 +5595,7 @@ msgid "Filament Settings" msgstr "Filament Ayarları" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4979,18 +5625,20 @@ msgid "Please confirm if the printer is connected." msgstr "Lütfen yazıcının bağlı olup olmadığını onaylayın." msgid "" -"The printer is currently busy downloading. Please try again after it finishes." +"The printer is currently busy downloading. Please try again after it " +"finishes." msgstr "" "Yazıcı şu anda indirmeyle meşgul. Lütfen bittikten sonra tekrar deneyin." msgid "Printer camera is malfunctioning." msgstr "Yazıcı kamerası arızalı." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Sorun oluştu. Lütfen yazıcının ürün yazılımını güncelleyin ve tekrar deneyin." -msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." +msgid "" +"LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" "Yalnızca LAN Canlı İzleme kapalı. Lütfen yazıcı ekranındaki canlı " "görüntülemeyi açın." @@ -5005,8 +5653,8 @@ msgid "Connection Failed. Please check the network and try again" msgstr "Bağlantı Başarısız. Lütfen ağı kontrol edip tekrar deneyin" msgid "" -"Please check the network and try again, You can restart or update the printer " -"if the issue persists." +"Please check the network and try again. You can restart or update the " +"printer if the issue persists." msgstr "" "Lütfen ağı kontrol edip tekrar deneyin. Sorun devam ederse yazıcıyı yeniden " "başlatabilir veya güncelleyebilirsiniz." @@ -5014,8 +5662,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "Yazıcıda oturum kapatıldı ve bağlanamıyor." -msgid "Stopped." -msgstr "Durdu." +msgid "Video Stopped." +msgstr "Video Durduruldu." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN Bağlantısı Başarısız Oldu (Canlı izleme başlatılamadı)" @@ -5052,6 +5700,9 @@ msgstr "Bilgi" msgid "Playing..." msgstr "Oynatılıyor..." +msgid "Loading..." +msgstr "Yükleniyor..." + msgid "Year" msgstr "Yıl" @@ -5070,6 +5721,9 @@ msgstr "Dosyaları aya göre gruplandırın, en yenisi önce olsun." msgid "Show all files, recent first." msgstr "Tüm dosyaları göster, en yenisi önce." +msgid "Timelapse" +msgstr "Timelapse" + msgid "Switch to timelapse files." msgstr "Timelapse dosyalarına geç." @@ -5079,7 +5733,8 @@ msgstr "Video" msgid "Switch to video files." msgstr "Video dosyalarına geç." -msgid "Switch to 3mf model files." +#, fuzzy +msgid "Switch to 3MF model files." msgstr "3mf model dosyalarına geçin." msgid "Delete selected files from printer." @@ -5106,10 +5761,6 @@ msgstr "Dosya listesini yazıcıdan yeniden yükleyin." msgid "No printers." msgstr "Yazıcı yok." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Bağlantı başarısız oldu [%d]!" - msgid "Loading file list..." msgstr "Dosya listesi yükleniyor..." @@ -5119,29 +5770,16 @@ msgstr "Dosya yok" msgid "Load failed" msgstr "Yükleme başarısız" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Başlatma başarısız oldu (Cihaz bağlantısı hazır değil)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"SD karttaki dosyaya göz atmak mevcut donanım yazılımında desteklenmiyor. " -"Lütfen yazıcının ürün yazılımını güncelleyin." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" -"Başlatma başarısız oldu (Depolama alanı kullanılamıyor, SD kartı takın.)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "LAN Bağlantısı Başarısız (SD kart görüntülenemedi)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "SD karttaki dosyaya göz atmak Yalnızca LAN Modunda desteklenmez." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Başlatma başarısız oldu (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5149,7 +5787,8 @@ msgid_plural "" "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "" "%u dosyasını yazıcıdan sileceksiniz. Devam edeceğinizden emin misiniz?" -msgstr[1] "%u dosyayı yazıcıdan sileceksiniz. Devam edeceğinizden emin misiniz?" +msgstr[1] "" +"%u dosyayı yazıcıdan sileceksiniz. Devam edeceğinizden emin misiniz?" msgid "Delete files" msgstr "Dosyaları sil" @@ -5161,7 +5800,7 @@ msgstr "'%s' dosyasını yazıcıdan silmek istiyor musunuz?" msgid "Delete file" msgstr "Dosyayı sil" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Model bilgileri alınıyor..." msgid "Failed to fetch model information from printer." @@ -5171,8 +5810,8 @@ msgid "Failed to parse model information." msgstr "Model bilgileri ayrıştırılamadı." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" ".gcode.3mf dosyası hiçbir G kodu verisi içermiyor. Lütfen dosyayı Bambu " "Studio ile dilimleyin ve yeni bir .gcode.3mf dosyasını dışa aktarın." @@ -5205,12 +5844,18 @@ msgstr "İndirme tamamlandı" msgid "Downloading %d%%..." msgstr "%d%% indiriliyor..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "" -"Yazıcıyı yeniden bağladığınızda işlem hemen tamamlanamıyor, lütfen daha sonra " -"tekrar deneyin." +"Yazıcıyı yeniden bağladığınızda işlem hemen tamamlanamıyor, lütfen daha " +"sonra tekrar deneyin." + +msgid "Timeout, please try again." +msgstr "" msgid "File does not exist." msgstr "Dosya bulunmuyor." @@ -5221,13 +5866,47 @@ msgstr "Dosya kontrol hatası. Lütfen tekrar deneyin." msgid "Not supported on the current printer version." msgstr "Geçerli yazıcı sürümünde desteklenmiyor." -msgid "Storage unavailable, insert SD card." -msgstr "Depolama alanı kullanılamıyor, SD kartı takın." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Hata kodu: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Hız:" @@ -5267,11 +5946,84 @@ msgstr "Pitch eksenini ters çevir" msgid "Invert Roll axis" msgstr "Silindir eksenini ters çevir" +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "Ara" + +msgid "My Device" +msgstr "Cihazım" + +msgid "Other Device" +msgstr "Diğer Cihaz" + +msgid "Online" +msgstr "Çevrimiçi" + +msgid "Input access code" +msgstr "Erişim kodunu girin" + +msgid "Can't find my devices?" +msgstr "Cihazlarımı bulamıyor musunuz?" + +msgid "Log out successful." +msgstr "Çıkış Başarılı." + +msgid "Offline" +msgstr "Çevrimdışı" + +msgid "Busy" +msgstr "Meşgul" + +msgid "Modifying the device name" +msgstr "Cihaz adını değiştir" + +msgid "Name is invalid;" +msgstr "Geçersiz isim;" + +msgid "illegal characters:" +msgstr "yasadışı karakterler:" + +msgid "illegal suffix:" +msgstr "yasadışı sonek:" + +msgid "The name is not allowed to be empty." +msgstr "Ad alanı boş bırakılamaz." + +msgid "The name is not allowed to start with space character." +msgstr "Adın boşluk karakteriyle başlamasına izin verilmez." + +msgid "The name is not allowed to end with space character." +msgstr "Adın boşluk karakteriyle bitmesine izin verilmez." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Pin Koduyla Bağla" + +msgid "Bind with Access Code" +msgstr "Erişim Kodu ile Bağla" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Yazdırma İlerlemesi" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Durdur" msgid "Layer: N/A" msgstr "Katman: Yok" @@ -5293,8 +6045,8 @@ msgid "" "(The model has already been rated. Your rating will overwrite the previous " "rating.)" msgstr "" -"(Model zaten derecelendirilmiştir. Derecelendirmeniz önceki derecelendirmenin " -"üzerine yazılacaktır)" +"(Model zaten derecelendirilmiştir. Derecelendirmeniz önceki " +"derecelendirmenin üzerine yazılacaktır)" msgid "Rate" msgstr "Derecelendir" @@ -5302,8 +6054,8 @@ msgstr "Derecelendir" msgid "Camera" msgstr "Kamera" -msgid "SD Card" -msgstr "Hafıza kartı" +msgid "Storage" +msgstr "Depolama" msgid "Camera Setting" msgstr "Kamera Ayarı" @@ -5320,35 +6072,41 @@ msgstr "Printer Parts" msgid "Print Options" msgstr "Yazdırma Seçenekleri" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Lamba" -msgid "Aux" -msgstr "Yardımcı" - -msgid "Cham" -msgstr "Bölme" - msgid "Bed" msgstr "Yatak" msgid "Debug Info" msgstr "Hata Ayıklama Bilgisi" -msgid "No SD Card" -msgstr "SD Kart Yok" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD Kart Anormal" +msgid "No Storage" +msgstr "Depolama Yok" + +msgid "Storage Abnormal" +msgstr "Depolama Anormal" msgid "Cancel print" msgstr "Yazdırmayı iptal et" -msgid "Are you sure you want to cancel this print?" -msgstr "Bu yazdırmayı iptal etmek istediğinizden emin misiniz?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Yazıcı başka bir yazdırma işiyle meşgul." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "İndiriliyor..." @@ -5369,17 +6127,15 @@ msgid "Layer: %d/%d" msgstr "Katman: %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" "Filamenti yüklemeden veya boşaltmadan önce lütfen nozulu 170 derecenin " "üzerine ısıtın." -msgid "Still unload" -msgstr "Daha Fazla Boşalt" - -msgid "Still load" -msgstr "Daha Fazla Yükle" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Lütfen kalibrasyondan önce bir AMS yuvası seçin" @@ -5406,8 +6162,19 @@ msgstr "Spor" msgid "Ludicrous" msgstr "Gülünç" -msgid "Can't start this without SD card." -msgstr "SD kart olmadan başlatılamıyor." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Baskı Profiline Puan Verin" @@ -5430,13 +6197,10 @@ msgstr "Gönder" msgid "Please click on the star first." msgstr "Lütfen önce yıldıza tıklayınız." -msgid "InFo" -msgstr "Bilgi" - msgid "Get oss config failed." msgstr "Oss yapılandırması başarısız." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Resim Yükle" msgid "Number of images successfully uploaded" @@ -5451,7 +6215,7 @@ msgstr " yapılandırma ön yüklemesi başarısız oldu\n" msgid " No corresponding storage bucket\n" msgstr " Uygun depolama alanı yok\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " açılamaz\n" msgid "" @@ -5478,7 +6242,7 @@ msgid "obtaining instance_id failed\n" msgstr "instance_id alınamadı\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5492,7 +6256,7 @@ msgstr "hata mesajı: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5500,7 +6264,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Bazı resimleriniz yüklenemedi. Değerlendirme için web sayfasına yönlendirmek " "ister misiniz?" @@ -5510,7 +6274,7 @@ msgstr "En fazla 16 görüntü seçebilirsiniz." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Bu baskı profiline olumlu bir puan vermek için (4 veya 5 yıldız) en az bir " "başarılı baskı kaydı gereklidir." @@ -5518,12 +6282,22 @@ msgstr "" msgid "Status" msgstr "Durum" +msgctxt "Firmware" msgid "Update" -msgstr "Güncelle" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Bir daha gösterme" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s hata" @@ -5551,38 +6325,69 @@ msgstr "%s bilgisi" msgid "Skip" msgstr "Atla" -msgid "Newer 3mf version" -msgstr "Daha yeni 3mf sürümü" +#, fuzzy +msgid "Newer 3MF version" +msgstr "Daha yeni 3MF sürümü" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" "3mf dosya sürümü Beta’dadır ve mevcut Snapmaker Orca sürümünden daha yenidir." msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "Snapmaker Orca Beta’yı denemek isterseniz tıklayabilirsiniz." +msgstr "Snapmaker Orca Beta’yı denemek isterseniz tıklayabilirsiniz" msgid "Download Beta Version" msgstr "Beta Sürümünü İndirin" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "3mf dosya sürümü mevcut Snapmaker Orca sürümünden daha yenidir." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Orca Dilimleyicinizi güncellemek, 3mf dosyasındaki tüm işlevleri " +"Orca Dilimleyicinizi güncellemek, 3MF dosyasındaki tüm işlevleri " "etkinleştirebilir." msgid "Current Version: " -msgstr "Şimdiki versiyonu:" +msgstr "Şimdiki versiyonu: " msgid "Latest Version: " -msgstr "En son sürüm:" +msgstr "En son sürüm: " + +msgctxt "Software" +msgid "Update" +msgstr "" msgid "Not for now" msgstr "Şu an için değil" +msgid "Server Exception" +msgstr "Sunucu İstisnası" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Sunucu yanıt veremiyor. Sunucu durumunu kontrol etmek için lütfen aşağıdaki " +"bağlantıya tıklayın." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Sunucu arıza durumundaysa, geçici olarak çevrimdışı yazdırmayı veya yerel " +"ağdan yazdırmayı kullanabilirsiniz." + +msgid "How to use LAN only mode" +msgstr "Yalnızca LAN modu nasıl kullanılır" + +msgid "Don't show this dialog again" +msgstr "Bu iletişim kutusunu bir daha gösterme" + msgid "3D Mouse disconnected." msgstr "3D Fare bağlantısı kesildi." @@ -5645,9 +6450,15 @@ msgstr[1] "%1$d Nesnelerin renkli boyaması var." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d nesne, kesme nesnesinin bir parçası olarak yüklendi." -msgstr[1] "%1$d nesne, kesme nesnesinin parçaları olarak yüklendi" +msgstr[1] "%1$d nesne, kesme nesnesinin parçaları olarak yüklendi." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d nesne pütürlü yüzey boyama ile yüklendi." +msgstr[1] "%1$d nesne bulanık cilt boyama ile yüklendi." msgid "ERROR" msgstr "HATA" @@ -5670,8 +6481,8 @@ msgstr "Hata:" msgid "Warning:" msgstr "Uyarı:" -msgid "Export successfully." -msgstr "Başarıyla dışarı aktarıldı." +msgid "Exported successfully" +msgstr "Başarıyla dışarı aktarıldı" msgid "Model file downloaded." msgstr "Model dosyası indirildi." @@ -5688,11 +6499,11 @@ msgstr " Yüklemek için tıklayın." msgid "WARNING:" msgstr "UYARI:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "" "Modelinizin desteğe ihtiyacı var! Lütfen destek materyalini etkinleştirin." -msgid "Gcode path overlap" +msgid "G-code path overlap" msgstr "Gcode yolu çakışması" msgid "Support painting" @@ -5741,12 +6552,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "Alt" -msgid "Enable AI monitoring of printing" -msgstr "Yazdırmanın AI izlemesini etkinleştirin" - -msgid "Sensitivity of pausing is" -msgstr "Duraklatma hassasiyeti" - msgid "Enable detection of build plate position" msgstr "Yapı plakası konumunun algılanmasını etkinleştir" @@ -5757,21 +6562,78 @@ msgstr "" "Baskı plakasının yerelleştirme etiketi algılanır ve etiket önceden " "tanımlanmış aralıkta değilse yazdırma duraklatılır." +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Yazdırmanın AI izlemesini etkinleştirin" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Nozul Topaklanma Algılaması" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "Birinci Katman Denetimi" msgid "Auto-recovery from step loss" msgstr "Adım kaybından otomatik kurtarma" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Uyarı Sesine İzin Ver" msgid "Filament Tangle Detect" msgstr "Filament Dolaşma Tespiti" -msgid "Nozzle Clumping Detection" -msgstr "Nozul Topaklanma Algılaması" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Nozulun filament veya diğer yabancı cisimler nedeniyle topaklanıp " @@ -5780,15 +6642,29 @@ msgstr "" msgid "Nozzle Type" msgstr "Nozul Tipi" -msgid "Stainless Steel" -msgstr "Paslanmaz çelik" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Güçlendirilmiş çelik" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Paslanmaz çelik" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" msgstr "Genel" @@ -5823,6 +6699,9 @@ msgstr "Mevcut plakanın kilidini aç" msgid "Lock current plate" msgstr "Mevcut plakayı kilitle" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "Mevcut plaka adını düzenle" @@ -5832,6 +6711,31 @@ msgstr "Plakayı öne doğru hareket ettirin" msgid "Customize current plate" msgstr "Mevcut plakayı özelleştir" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " plaka %1%:" @@ -5860,14 +6764,67 @@ msgstr "Tahmini süresi" msgid "Filament changes" msgstr "Filament değişiklikleri" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "Ön ayarı düzenlemek için tıklayın" msgid "Connection" msgstr "Bağlantı" -msgid "Bed type" -msgstr "Yatak türü" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "Yıkama hacimleri" @@ -5890,45 +6847,28 @@ msgstr "Arama plakası, nesne ve parça." msgid "Pellets" msgstr "Peletler" +#, c-format, boost-format msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -"AMS filamentleri yok. AMS bilgilerini yüklemek için lütfen 'Cihaz' sayfasında " -"bir yazıcı seçin." + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Uyumlu filament yok ve senkronizasyon gerçekleştirilmiyor." msgid "Sync filaments with AMS" msgstr "Filamentleri AMS ile senkronize et" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Filamentleri AMS ile senkronize etmek, seçili tüm mevcut filament ön " -"ayarlarını ve renklerini kaldıracaktır. Devam etmek istiyor musun?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Zaten bir senkronizasyon yaptınız. Yalnızca değişiklikleri senkronize etmek " -"mi yoksa tümünü yeniden senkronize etmek mi istiyorsunuz?" - -msgid "Sync" -msgstr "Senkronizasyon" - -msgid "Resync" -msgstr "Yeniden eşitleme" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Uyumlu filament yok ve senkronizasyon gerçekleştirilmiyor." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update Orca " -"Slicer or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Genel ön ayara eşlenen bazı bilinmeyen filamentler var. Sistem ön ayarlarında " -"bir güncelleme olup olmadığını kontrol etmek için lütfen Snapmaker Orca'ı " -"güncelleyin veya Snapmaker Orca'ı yeniden başlatın." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -5936,15 +6876,15 @@ msgstr "\"%1%\" dosyasındaki değişiklikleri kaydetmek istiyor musunuz?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Başarıyla kaldırıldı. %s(%s) aygıtı artık bilgisayardan güvenli bir şekilde " "kaldırılabilir." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "%s(%s) aygıtının çıkarılması başarısız oldu." +msgid "Ejecting of device %s (%s) has failed." +msgstr "%s (%s) aygıtının çıkarılması başarısız oldu." msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Önceki kaydedilmemiş proje algılandı, geri yüklemek istiyor musunuz?" @@ -5953,13 +6893,13 @@ msgid "Restore" msgstr "Geri Yükleme" msgid "" -"The current hot bed temperature is relatively high. The nozzle may be clogged " -"when printing this filament in a closed enclosure. Please open the front door " -"and/or remove the upper glass." +"The current hot bed temperature is relatively high. The nozzle may be " +"clogged when printing this filament in a closed enclosure. Please open the " +"front door and/or remove the upper glass." msgstr "" -"Mevcut sıcak yatak sıcaklığı oldukça yüksek. Bu filamenti kapalı bir muhafaza " -"içinde bastırırken nozzle tıkanabilir. Lütfen ön kapağı açın ve/veya üst camı " -"çıkarın." +"Mevcut sıcak yatak sıcaklığı oldukça yüksek. Bu filamenti kapalı bir " +"muhafaza içinde bastırırken nozzle tıkanabilir. Lütfen ön kapağı açın ve/" +"veya üst camı çıkarın." msgid "" "The nozzle hardness required by the filament is higher than the default " @@ -5977,28 +6917,54 @@ msgstr "" "Geleneksel timelapse etkinleştirilmesi yüzey kusurlarına neden olabilir. " "Yumuşak moda geçilmesi önerilir." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Kenar çubuğunu genişlet" msgid "Collapse sidebar" msgstr "Kenar çubuğunu daralt" +msgid "Tab" +msgstr "Tab" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Dosya yükleniyor: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "" -"Snapmaker Orca, 3mf formatını desteklememektedir. Sadece geometri verilerini " +"Snapmaker Orca, 3MF formatını desteklememektedir. Sadece geometri verilerini " "yükle." -msgid "Load 3mf" -msgstr "3mf yükle" +msgid "Load 3MF" +msgstr "3MF yükle" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" +"Bu proje Snapmaker Orca 2.3.1-alpha ile oluşturulmuştur ve geçerli dolgu " +"(infill) deseninizle doğru çalışmayabilecek dolgu döndürme şablon ayarlarını " +"kullanmaktadır. Bu durum, zayıf destek veya baskı kalitesi sorunlarına yol " +"açabilir." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Snapmaker Orca’ın, döndürme şablonu ayarlarını temizleyerek otomatik olarak " +"düzeltmesini ister misiniz?" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "" "3mf'nin %s sürümü, %s'in %s sürümünden daha yeni, Aşağıdaki anahtarlar " "tanınmadan bulundu:" @@ -6006,40 +6972,49 @@ msgstr "" msgid "You'd better upgrade your software.\n" msgstr "Yazılımınızı yükseltseniz iyi olur.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" "3mf'nin %s sürümü, %s'in %s sürümünden daha yeni, Yazılımınızı yükseltmenizi " "öneririz." -msgid "Invalid values found in the 3mf:" +#, fuzzy +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" +"3MF, eski Snapmaker Orca tarafından oluşturulmuştur, yalnızca geometri " +"verilerini yükleyin." + +msgid "Invalid values found in the 3MF:" msgstr "3mf'de geçersiz değerler bulundu:" msgid "Please correct them in the param tabs" msgstr "Lütfen bunları parametre sekmelerinde düzeltin" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"3mf dosyasında filament veya yazıcı ön ayarlarında şu değiştirilmiş G-kodları " -"bulunmaktadır:" +"3mf dosyasında filament veya yazıcı ön ayarlarında şu değiştirilmiş G-" +"kodları bulunmaktadır:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Lütfen bu değiştirilmiş G-kodlarının makineye herhangi bir zarar vermemesi " "için güvenli olduğunu onaylayın!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "G-kodları Değişti" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "3mf dosyasında şu özel filament veya yazıcı ayarları bulunmaktadır:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Lütfen bu ön ayarlar içindeki G-kodlarının makineye herhangi bir zararı " @@ -6048,8 +7023,9 @@ msgstr "" msgid "Customized Preset" msgstr "Özel Ayar" -msgid "Name of components inside step file is not UTF8 format!" -msgstr "Adım dosyasındaki bileşenlerin adı UTF8 formatında değil!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" +msgstr "Step dosyasındaki bileşenlerin adı UTF8 formatında değil!" msgid "The name may show garbage characters!" msgstr "İsimde çöp karakterler görünebilir!" @@ -6097,14 +7073,24 @@ msgstr "" msgid "Object with multiple parts was detected" msgstr "Birden fazla parçaya sahip nesne algılandı" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Dosya herhangi bir geometri verisi içermiyor." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" -"Nesneniz çok büyük görünüyor. Isı yatağına sığacak şekilde otomatik olarak " +"Nesneniz çok büyük görünüyor. Plakaya sığacak şekilde otomatik olarak " "küçültmek istiyor musunuz?" msgid "Object too large" @@ -6152,7 +7138,7 @@ msgid "Another export job is running." msgstr "Başka bir ihracat işi yürütülüyor." msgid "Unable to replace with more than one volume" -msgstr "Birden fazla hacimle değiştirme yapılamıyor." +msgstr "Birden fazla hacimle değiştirme yapılamıyor" msgid "Error during replace" msgstr "Değiştirme sırasında hata" @@ -6166,6 +7152,34 @@ msgstr "Yeni dosya seç" msgid "File for the replace wasn't selected" msgstr "Değiştirme dosyası seçilmedi" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Dosya seçin" @@ -6209,10 +7223,21 @@ msgstr "Ağ Eklentisi algılanmadı. Ağla ilgili özellikler kullanılamıyor." msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Yalnızca önizleme modu:\n" -"Yüklenen dosya yalnızca gcode içeriyor, Hazırlama sayfasına girilemiyor" +"Yüklenen dosya yalnızca Gcode içeriyor, hazırlama sayfasına girilemiyor." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "Değiştirilen ön ayarları yeni projede tutabilir veya silebilirsiniz" @@ -6238,13 +7263,13 @@ msgstr "Projeyi kaydet" msgid "Importing Model" msgstr "Model İçe aktarılıyor" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "3mf dosyasını hazırla..." msgid "Download failed, unknown file format." msgstr "İndirme başarısız oldu, dosya türü bilinmiyor." -msgid "downloading project ..." +msgid "downloading project..." msgstr "proje indiriliyor..." msgid "Download failed, File size exception." @@ -6252,24 +7277,32 @@ msgstr "İndirme başarısız oldu, Dosya boyutu sorunlu." #, c-format, boost-format msgid "Project downloaded %d%%" -msgstr "" -"Proje %d%% indirildiBambu Studio’ya içe aktarma başarısız oldu. Lütfen " -"dosyayı indirin ve manuel olarak içe aktarın." +msgstr "Proje %d%% indirildi" msgid "" -"Importing to Snapmaker Orca failed. Please download the file and manually import " -"it." +"Importing to Snapmaker Orca failed. Please download the file and manually " +"import it." msgstr "" "Snapmaker Orca'ya aktarma başarısız oldu. Lütfen dosyayı indirin ve manuel " "olarak İçe aktarın." +msgid "INFO:" +msgstr "BİLGİ:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "Kalibrasyon için ivme sağlanmadı. Varsayılan ivme değerini kullanın " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "Kalibrasyon için hız sağlanmadı. Varsayılan optimum hızı kullanın " + msgid "Import SLA archive" msgstr "SLA arşivini içe aktar" msgid "The selected file" msgstr "Seçili dosya" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "geçerli gcode içermiyor." msgid "Error occurs while loading G-code file" @@ -6309,10 +7342,10 @@ msgstr "Aynı anda yalnızca bir G kodu dosyası açılabilir." msgid "G-code loading" msgstr "G-kod yükleniyor" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G kodu dosyaları modellerle birlikte yüklenemez!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Önizleme modundayken model eklenemiyor!" msgid "All objects will be removed, continue?" @@ -6346,15 +7379,21 @@ msgstr "Dilimlenmiş dosyayı şu şekilde kaydedin:" #, c-format, boost-format msgid "" -"The file %s has been sent to the printer's storage space and can be viewed on " -"the printer." +"The file %s has been sent to the printer's storage space and can be viewed " +"on the printer." msgstr "" "%s dosyası yazıcının depolama alanına gönderildi ve yazıcıda " "görüntülenebiliyor." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" -"Unable to perform boolean operation on model meshes. Only positive parts will " -"be kept. You may fix the meshes and try again." +"Unable to perform boolean operation on model meshes. Only positive parts " +"will be kept. You may fix the meshes and try again." msgstr "" "Model ağlarında boole işlemi gerçekleştirilemiyor. Yalnızca olumlu kısımlar " "tutulacaktır. Kafesleri düzeltip tekrar deneyebilirsiniz." @@ -6382,24 +7421,15 @@ msgstr "" "Model ağlarında boole işlemi gerçekleştirilemiyor. Yalnızca pozitif parçalar " "ihraç edilecektir." -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Orijinal SVG'leri yerel yollarıyla birlikte 3MF dosyasına depolamak " -"istediğinizden emin misiniz?\n" -"'HAYIR' tuşuna basarsanız projedeki tüm SVG'ler artık düzenlenemez." - -msgid "Private protection" -msgstr "Özel koruma" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "Yazıcı hazır mı? Baskı plakası takılı, boş ve temiz mi?" msgid "Upload and Print" msgstr "Yükle ve Yazdır" +msgid "Abnormal print file data. Please slice again" +msgstr "Anormal yazdırma dosyası verileri. Lütfen tekrar dilimleyin" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6420,8 +7450,33 @@ msgstr "Tamir edilmeden önce özel destekler ve renkli boyalar kaldırıldı." msgid "Optimize Rotation" msgstr "Rotasyonu Optimize Et" -msgid "Invalid number" -msgstr "Geçersiz numara" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Plaka Ayarları" @@ -6462,9 +7517,6 @@ msgstr "Hacim: %1% mm³\n" msgid "Triangles: %1%\n" msgstr "Üçgenler: %1%\n" -msgid "Tips:" -msgstr "İpuçları:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6474,14 +7526,40 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature to " -"non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"Plaka% d: %s'nin %s(%s) filamentinı yazdırmak için kullanılması önerilmez. " -"Eğer yine de bu baskıyı yapmak istiyorsanız, lütfen bu filamentin yatak " +"Plaka %d: %s'nin %s(%s) filamentinı yazdırmak için kullanılması önerilmez. " +"Eğer yine de bu baskıyı yapmak istiyorsanız, lütfen bu filamentin plaka " "sıcaklığını sıfır olmayan bir değere ayarlayın." +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + msgid "Switching the language requires application restart.\n" msgstr "Dili değiştirmek uygulamanın yeniden başlatılmasını gerektirir.\n" @@ -6497,39 +7575,6 @@ msgstr "Bazı ön ayarlar değiştirilirken uygulama dilinin değiştirilmesi." msgid "Changing application language" msgstr "Dil değiştiriliyor" -msgid "Changing the region will log out your account.\n" -msgstr "Bölgeyi değiştirmek hesabınızdan çıkış yapmanıza neden olacaktır.\n" - -msgid "Region selection" -msgstr "Bölge seçimi" - -msgid "Second" -msgstr "Saniye" - -msgid "Browse" -msgstr "Aç" - -msgid "Choose Download Directory" -msgstr "İndirme Dizini seçin" - -msgid "Associate" -msgstr "Ortak" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "Orca’nın modelleri açabilmesi için Snapmaker Orca ile" - -msgid "Current Association: " -msgstr "Mevcut Ortak:" - -msgid "Current Instance" -msgstr "Mevcut Örnek" - -msgid "Current Instance Path: " -msgstr "Mevcut Örnek Yolu:" - -msgid "General Settings" -msgstr "Genel Ayarlar" - msgid "Asia-Pacific" msgstr "Asya Pasifik" @@ -6545,25 +7590,56 @@ msgstr "Kuzey Amerika" msgid "Others" msgstr "Diğer" -msgid "Login Region" -msgstr "Giriş Bölgesi" +msgid "Changing the region will log out your account.\n" +msgstr "Bölgeyi değiştirmek hesabınızdan çıkış yapmanıza neden olacaktır.\n" -msgid "Stealth Mode" -msgstr "Gizli mod" +msgid "Region selection" +msgstr "Bölge seçimi" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Saniye cinsinden yedekleme periyodu." + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Bu, Bambu’nun bulut hizmetlerine veri aktarımını durdurur. BBL makinelerini " -"kullanmayan veya yalnızca LAN modunu kullanan kullanıcılar bu işlevi güvenle " -"açabilir." -msgid "Enable network plugin" -msgstr "Ağ eklentisini etkinleştir" +msgid "Browse" +msgstr "Aç" -msgid "Check for stable updates only" -msgstr "Yalnızca kararlı güncellemeleri kontrol edin" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "İndirme Dizini seçin" + +msgid "Associate" +msgstr "Ortak" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "Orca’nın modelleri açabilmesi için Snapmaker Orca ile" + +msgid "Current Association: " +msgstr "Mevcut Bağlantı: " + +msgid "Current Instance" +msgstr "Mevcut Örnek" + +msgid "Current Instance Path: " +msgstr "Mevcut Örnek Yolu: " + +msgid "General" +msgstr "Genel" msgid "Metric" msgstr "Metrik" @@ -6574,13 +7650,25 @@ msgstr "Imperial" msgid "Units" msgstr "Birimler" +msgid "Home" +msgstr "Ana Sayfa" + +msgid "Default page" +msgstr "Varsayılan sayfa" + +msgid "Set the page opened on startup." +msgstr "Açılışta açılacak sayfayı ayarlayın." + +msgid "Enable dark mode" +msgstr "Karanlık modu etkinleştir" + msgid "Allow only one Snapmaker Orca instance" msgstr "Yalnızca bir Snapmaker Orca örneğine izin ver" msgid "" "On OSX there is always only one instance of app running by default. However " -"it is allowed to run multiple instances of same app from the command line. In " -"such case this settings will allow only one instance." +"it is allowed to run multiple instances of same app from the command line. " +"In such case this settings will allow only one instance." msgstr "" "OSX’te her zaman varsayılan olarak çalışan tek bir uygulama örneği vardır. " "Ancak aynı uygulamanın birden fazla örneğinin komut satırından " @@ -6588,21 +7676,120 @@ msgstr "" "örneğe izin verecektir." msgid "" -"If this is enabled, when starting Snapmaker Orca and another instance of the same " -"Snapmaker Orca is already running, that instance will be reactivated instead." +"If this is enabled, when starting Snapmaker Orca and another instance of the " +"same Snapmaker Orca is already running, that instance will be reactivated " +"instead." msgstr "" "Bu etkinleştirilirse, Snapmaker Orca başlatıldığında ve aynı Snapmaker Orca’ın başka " "bir örneği zaten çalışıyorken, bunun yerine bu örnek yeniden " "etkinleştirilecektir." -msgid "Home" -msgstr "Ana Sayfa" +msgid "Show splash screen" +msgstr "Açılış ekranını göster" -msgid "Default Page" -msgstr "Varsayılan Sayfa" +msgid "Show the splash screen during startup." +msgstr "Açılış sırasında açılış ekranını göster." -msgid "Set the page opened on startup." -msgstr "Açılışta açılacak sayfayı ayarlayın." +msgid "Downloads folder" +msgstr "İndirilenler klasörü" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Tümünü Yükle" + +msgid "Ask When Relevant" +msgstr "İlgili Olduğunda Sor" + +msgid "Always Ask" +msgstr "Her Zaman Sor" + +msgid "Load Geometry Only" +msgstr "Yalnızca Geometriyi Yükle" + +msgid "Load behaviour" +msgstr "Yükleme davranışı" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "Bir .3mf açılırken yazıcı/filament/işlem ayarları yüklenmeli mi?" + +msgid "Maximum recent files" +msgstr "Son kullanılan dosyaların maksimum sayısı" + +msgid "Maximum count of recent files" +msgstr "Son dosyaların maksimum sayısı" + +msgid "Add STL/STEP files to recent files list" +msgstr "STL/STEP dosyalarını son dosyalar listesine ekle" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Değiştirilmiş G-kodları içeren 3MF dosyalarını yüklerken uyarma" + +msgid "Show options when importing STEP file" +msgstr "STEP dosyasını içe aktarırken seçenekleri göster" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Etkinleştirilirse, STEP dosyası içe aktarılırken bir parametre ayarları " +"iletişim kutusu görüntülenir." + +msgid "Auto backup" +msgstr "Otomatik yedekleme" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Ara sıra meydana gelen çökmelerden sonra geri yüklemek için projenizi " +"düzenli aralıklarla yedekleyin." + +msgid "Preset" +msgstr "Ön ayar" + +msgid "Remember printer configuration" +msgstr "Yazıcı yapılandırmasını hatırla" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Etkinleştirilirse, Orca her yazıcı için filament/işlem yapılandırmasını " +"hatırlayacak ve otomatik olarak değiştirecektir." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Çoklu Cihaz Yönetimi" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Bu seçenek etkinleştirildiğinde, aynı anda birden fazla cihaza bir görev " +"gönderebilir ve birden fazla cihazı yönetebilirsiniz." + +msgid "(Requires restart)" +msgstr "(Yeniden başlatma gerektirir)" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "Davranış" + +msgid "All" +msgstr "Tümü" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Klonlamadan sonra plakayı otomatik düzenle" msgid "Touchpad" msgstr "Dokunmatik yüzey" @@ -6619,6 +7806,12 @@ msgstr "" "Varsayılan: Döndürme için LMB+hareket, kaydırma için RMB/MMB+hareket.\n" "Dokunmatik yüzey: Döndürme için Alt+hareket, kaydırma için Shift+hareket." +msgid "Orbit speed multiplier" +msgstr "Yörünge hızı çarpanı" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "Daha ince veya daha kaba kamera hareketi için yörünge hızını çarpar." + msgid "Zoom to mouse position" msgstr "Mouse konumuna yakınlaştır" @@ -6637,6 +7830,15 @@ msgstr "" "Etkinleştirilirse serbest kamerayı kullanın. Etkin değilse kısıtlı kamerayı " "kullanın." +msgid "Swap pan and rotate mouse buttons" +msgstr "Pan ve döndürme işlevlerini fare düğmeleri arasında değiştir" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Etkinleştirildiğinde, sol ve sağ fare düğmelerinin pan ve döndürme " +"işlevlerini yer değiştirir." + msgid "Reverse mouse zoom" msgstr "Mouse yakınlaştırmasını tersine çevir" @@ -6644,93 +7846,104 @@ msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" "Etkinleştirilirse, mouse tekerleğiyle yakınlaştırmanın yönü tersine çevrilir." -msgid "Show splash screen" -msgstr "Açılış ekranını göster" - -msgid "Show the splash screen during startup." -msgstr "Açılış sırasında açılış ekranını göster." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Başlangıçtan sonra \"Günün ipucu\" bildirimini göster" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Etkinleştirilirse başlangıçta faydalı ipuçları görüntülenir." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "Hacimleri temizleme: Renk her değiştiğinde otomatik olarak hesapla." - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "Etkinleştirilirse, renk her değiştiğinde otomatik hesapla." - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." +msgid "Clear my choice on..." msgstr "" -"Yıkama hacimleri: Filament her değiştirildiğinde otomatik olarak hesaplanır." -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "Etkinleştirilirse filaman her değiştirildiğinde otomatik hesaplama" - -msgid "Remember printer configuration" -msgstr "Yazıcı yapılandırmasını hatırla" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +msgid "Unsaved projects" msgstr "" -"Etkinleştirilirse, Orca her yazıcı için filament/işlem yapılandırmasını " -"hatırlayacak ve otomatik olarak değiştirecektir." -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "Çoklu Cihaz Yönetimi(Studio yeniden başlatıldıktan sonra geçerli olur)." +msgid "Clear my choice on the unsaved projects." +msgstr "Kaydedilmemiş projelerdeki seçimimi temizle." -msgid "" -"With this option enabled, you can send a task to multiple devices at the same " -"time and manage multiple devices." +msgid "Unsaved presets" msgstr "" -"Bu seçenek etkinleştirildiğinde, aynı anda birden fazla cihaza bir görev " -"gönderebilir ve birden fazla cihazı yönetebilirsiniz." - -msgid "Network" -msgstr "Ağ" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "Kullanıcı ön ayarları otomatik senkronizasyon (Yazıcı/Filament/İşlem)" - -msgid "User Sync" -msgstr "Kullanıcı Senkronizasyonu" - -msgid "Update built-in Presets automatically." -msgstr "Yerleşik Ön Ayarları otomatik olarak güncelleyin." - -msgid "System Sync" -msgstr "Sistem Senkronizasyonu" msgid "Clear my choice on the unsaved presets." msgstr "Kaydedilmemiş ön ayarlardaki seçimimi temizle." +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "Giriş bölgesi" + +msgid "Stealth mode" +msgstr "Gizli mod" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Bu, Bambu’nun bulut hizmetlerine veri aktarımını durdurur. BBL makinelerini " +"kullanmayan veya yalnızca LAN modunu kullanan kullanıcılar bu işlevi güvenle " +"açabilir." + +msgid "Network test" +msgstr "Ağ testi" + +msgid "Test" +msgstr "Test" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Yalnızca kararlı güncellemeleri kontrol edin" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "Kullanıcı ön ayarları otomatik senkronizasyon (Yazıcı/Filament/İşlem)" + +msgid "Update built-in Presets automatically." +msgstr "Yerleşik Ön Ayarları otomatik olarak güncelleyin." + +msgid "Network plugin" +msgstr "Ağ eklentisi" + +msgid "Enable network plugin" +msgstr "Ağ eklentisini etkinleştir" + +msgid "Use legacy network plugin" +msgstr "Eski ağ eklentisini kullan" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" +"Yeni BambuLab yazılımlarını destekleyen en son ağ eklentisini kullanmayı " +"devre dışı bırakın." + msgid "Associate files to Snapmaker Orca" msgstr "Dosyaları Snapmaker Orca ile ilişkilendirin" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr ".3mf dosyalarını Snapmaker Orca ile ilişkilendirin" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Etkinleştirilirse, Snapmaker Orca'ı .3mf dosyalarını açacak varsayılan uygulama " "olarak ayarlar" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr ".stl dosyalarını Snapmaker Orca ile ilişkilendirin" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Etkinleştirilirse Snapmaker Orca'ı .stl dosyalarını açmak için varsayılan " "uygulama olarak ayarlar" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr ".step/.stp dosyalarını Snapmaker Orca ile ilişkilendirin" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Etkinleştirilirse, Snapmaker Orca'ı .step dosyalarını açmak için varsayılan " "uygulama olarak ayarlar" @@ -6738,44 +7951,8 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "Web bağlantılarını Snapmaker Orca ile ilişkilendirin" -msgid "Associate URLs to Snapmaker Orca" -msgstr "URL’leri Snapmaker Orca ile ilişkilendirin" - -msgid "Maximum recent projects" -msgstr "Maksimum yeni proje" - -msgid "Maximum count of recent projects" -msgstr "Maksimum yeni proje sayısı" - -msgid "Clear my choice on the unsaved projects." -msgstr "Kaydedilmemiş projelerdeki seçimimi temizle." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Değiştirilmiş G-kodları içeren 3MF dosyalarını yüklerken uyarı verme" - -msgid "Auto-Backup" -msgstr "Otomatik yedekleme" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." +msgid "Developer" msgstr "" -"Ara sıra meydana gelen çökmelerden sonra geri yüklemek için projenizi düzenli " -"aralıklarla yedekleyin." - -msgid "every" -msgstr "her" - -msgid "The peroid of backup in seconds." -msgstr "Saniye cinsinden yedekleme periyodu." - -msgid "Downloads" -msgstr "İndirilenler" - -msgid "Dark Mode" -msgstr "Karanlık Mod" - -msgid "Enable Dark mode" -msgstr "Karanlık modu etkinleştir" msgid "Develop mode" msgstr "Geliştirici Modu" @@ -6783,11 +7960,42 @@ msgstr "Geliştirici Modu" msgid "Skip AMS blacklist check" msgstr "AMS kara liste kontrolünü atla" -msgid "Home page and daily tips" -msgstr "Ana sayfa ve günlük ipuçları" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Başlangıçta ana sayfayı göster" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Günlük Düzeyi" + +msgid "fatal" +msgstr "kritik" + +msgid "error" +msgstr "hata" + +msgid "warning" +msgstr "uyarı" + +msgid "debug" +msgstr "hata ayıklama" + +msgid "trace" +msgstr "iz" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Ayarları senkronize et" @@ -6828,24 +8036,6 @@ msgstr "SSL'yi (FTP) etkinleştir" msgid "Internal developer mode" msgstr "Dahili geliştirici modu" -msgid "Log Level" -msgstr "Günlük Düzeyi" - -msgid "fatal" -msgstr "kritik" - -msgid "error" -msgstr "hata" - -msgid "warning" -msgstr "uyarı" - -msgid "debug" -msgstr "hata ayıklama" - -msgid "trace" -msgstr "iz" - msgid "Host Setting" msgstr "Yazıcı Ayarı" @@ -6867,10 +8057,10 @@ msgstr "hata ayıklama kaydet düğmesi" msgid "save debug settings" msgstr "hata ayıklama ayarlarını kaydet" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "DEBUG ayarları başarıyla kaydedildi!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Bulut ortamını değiştirin, lütfen tekrar giriş yapın!" msgid "System presets" @@ -6882,14 +8072,20 @@ msgstr "Kullanıcı ön ayarları" msgid "Incompatible presets" msgstr "Uyumsuz ön ayarlar" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS filamentler" -msgid "Click to pick filament color" -msgstr "Filament rengini seçmek için tıklayın" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "Lütfen filament rengini seçin" +msgid "Click to select filament color" +msgstr "Filament rengini seçmek için tıklayın" msgid "Add/Remove presets" msgstr "Ön ayarları ekle/kaldır" @@ -6900,18 +8096,33 @@ msgstr "Ön ayarı düzenle" msgid "Project-inside presets" msgstr "Proje içi ön ayarlar" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Filament Ekle/Kaldır" msgid "Add/Remove materials" msgstr "Materyal Ekle/Kaldır" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "Yazıcıları Seç/Kaldır (sistem ön ayarları)" msgid "Create printer" msgstr "Yazıcı oluştur" +msgid "Empty" +msgstr "Boş" + +msgid "Incompatible" +msgstr "Uyumsuz" + msgid "The selected preset is null!" msgstr "Seçilen ön ayar boş!" @@ -6930,6 +8141,12 @@ msgstr "Lütfen katman değerini girin (>= 2)." msgid "Plate name" msgstr "Plaka adı" +msgid "Same as Global Plate Type" +msgstr "Global plaka tipi ile aynı" + +msgid "Bed type" +msgstr "Yatak türü" + msgid "Same as Global Print Sequence" msgstr "Global Yazdırma Sırasıyla aynı" @@ -6948,9 +8165,6 @@ msgstr "Spiral vazo" msgid "First layer filament sequence" msgstr "İlk katman filament dizisi" -msgid "Same as Global Plate Type" -msgstr "Global plaka tipi ile aynı" - msgid "Same as Global Bed Type" msgstr "Global Yatak Tipi ile aynı" @@ -6969,28 +8183,28 @@ msgstr "Çıkış" msgid "Slice all plate to obtain time and filament estimation" msgstr "Zaman ve filament tahminini elde etmek için tüm plakayı dilimleyin" -msgid "Packing project data into 3mf file" -msgstr "Proje verilerini 3mf dosyasına paketleme" +msgid "Packing project data into 3MF file" +msgstr "Proje verilerini 3MF dosyasına paketleme" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "3mf yükleniyor" msgid "Jump to model publish web page" msgstr "Model yayınlama web sayfasına git" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Not: Hazırlık birkaç dakika sürebilir. Lütfen sabırlı olun." msgid "Publish" msgstr "Yayınla" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Yayınlama iptal edildi" msgid "Slicing Plate 1" msgstr "Dilimleme Plakası 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Verileri 3mf'ye paketle" msgid "Jump to webpage" @@ -7009,19 +8223,20 @@ msgstr "Ön ayar içerisinde proje" msgid "Name is unavailable." msgstr "Ad kullanılamıyor." -msgid "Overwrite a system profile is not allowed" -msgstr "Sistem profilinin üzerine yazmaya izin verilmiyor" +msgid "Overwriting a system profile is not allowed." +msgstr "Sistem profilinin üzerine yazmaya izin verilmiyor." #, boost-format msgid "Preset \"%1%\" already exists." msgstr "\"%1%\" ön ayarı zaten mevcut." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "\"%1%\" ön ayarı zaten mevcut ve mevcut yazıcıyla uyumlu değil." -msgid "Please note that saving action will replace this preset" -msgstr "Kaydetme eyleminin bu ön ayarın yerini alacağını lütfen unutmayın" +msgid "Please note that saving will overwrite this preset." +msgstr "Kaydetme eyleminin bu ön ayarın yerini alacağını lütfen unutmayın." msgid "The name cannot be the same as a preset alias name." msgstr "Ad, önceden ayarlanmış bir takma adla aynı olamaz." @@ -7056,59 +8271,71 @@ msgstr "Kolayca \"%1%\"e geçin" msgid "Task canceled" msgstr "Görev iptal edildi" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Ara" - -msgid "My Device" -msgstr "Cihazım" - -msgid "Other Device" -msgstr "Diğer Cihaz" - -msgid "Online" -msgstr "Çevrimiçi" - -msgid "Input access code" -msgstr "Erişim kodunu girin" - -msgid "Can't find my devices?" -msgstr "Cihazlarımı bulamıyor musunuz?" - -msgid "Log out successful." -msgstr "Çıkış Başarılı." - -msgid "Busy" -msgstr "Meşgul" - msgid "Bambu Cool Plate" -msgstr "Bambu Soğuk Plaka" +msgstr "Bambu Cool Plate" msgid "PLA Plate" msgstr "PLA Plaka" msgid "Bambu Engineering Plate" -msgstr "Bambu Mühendislik Plakası" +msgstr "" msgid "Bambu Smooth PEI Plate" -msgstr "Bambu Pürüzsüz PEI Plaka" +msgstr "" msgid "High temperature Plate" -msgstr "Yüksek Sıcaklık Plakası" +msgstr "Bambu Smooth PEI Plate" msgid "Bambu Textured PEI Plate" -msgstr "Bambu Dokulu PEI Plaka" +msgstr "" -msgid "Send print job to" -msgstr "Yazdırma işini şuraya gönder" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Akış Dinamiği Kalibrasyonu" -msgid "Click here if you can't connect to the printer" -msgstr "Yazıcıya bağlanamıyorsanız burayı tıklayın" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "gönderme tamamlandı" @@ -7116,58 +8343,15 @@ msgstr "gönderme tamamlandı" msgid "Error code" msgstr "Hata kodu" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "Oturum açma hesabı yok, yalnızca LAN modundaki yazıcılar görüntüleniyor" - -msgid "Connecting to server" -msgstr "Sunucuya baglanıyor" - -msgid "Synchronizing device information" -msgstr "Cihaz bilgileri senkronize ediliyor" - -msgid "Synchronizing device information time out" -msgstr "Cihaz bilgilerinin senkronize edilmesi zaman aşımı" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "Yazıcı ürün yazılımını güncellerken yazdırma işi gönderilemiyor" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" +msgid "High Flow" msgstr "" -"Yazıcı talimatları yürütüyor. Lütfen bittikten sonra yazdırmayı yeniden " -"başlatın" - -msgid "The printer is busy on other print job" -msgstr "Yazıcı başka bir yazdırma işiyle meşgul" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"%s filamenti AMS yuvası sayısını aşıyor. AMS yuvası atamasını desteklemek " -"için lütfen yazıcının ürün yazılımını güncelleyin." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Filament, AMS yuvalarının sayısını aşıyor. AMS yuvası atamasını desteklemek " -"için lütfen yazıcının ürün yazılımını güncelleyin." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"AMS slot eşlemelerine yönelik filament oluşturulmuştur. Eşleme AMS yuvasını " -"değiştirmek için yukarıdaki filamentlerden birine tıklayabilirsiniz" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Yazdırma işini göndermeden önce eşleme AMS yuvasını belirtmek için lütfen " -"yukarıdaki her filamente tıklayın" #, c-format, boost-format msgid "" @@ -7184,38 +8368,12 @@ msgstr "" "Filament, AMS yuvasındaki filamentle eşleşmiyor. AMS yuvası atamasını " "desteklemek için lütfen yazıcının ürün yazılımını güncelleyin." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS slot." -msgstr "" -"Yazıcı ürün yazılımı yalnızca filament => AMS yuvasının sıralı eşlemesini " -"destekler." - -msgid "An SD card needs to be inserted before printing." -msgstr "Yazdırmadan önce bir SD kartın takılması gerekir." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"Seçilen yazıcı (%s), dilimleyicideki (%s) seçilen yazıcı profiliyle uyumlu " -"değil." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "Hızlandırılmış çekim kaydetmek için bir SD kartın takılması gerekir." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Yazdırma işi, ürün yazılımının güncellenmesi gereken bir yazıcıya " -"gönderilemiyor." - -msgid "Cannot send the print job for empty plate" -msgstr "Boş kalıp için yazdırma işi gönderilemiyor" - -msgid "This printer does not support printing all plates" -msgstr "Bu yazıcı tüm kalıpların yazdırılmasını desteklemiyor" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7225,19 +8383,25 @@ msgstr "" "atlamalı videolar oluşturmayacaktır." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Timelapse desteklenmiyor çünkü Baskı sıralaması \"Nesneye\" göre olarak " -"ayarlandı." msgid "Errors" msgstr "Hatalar" -msgid "Please check the following:" -msgstr "Lütfen aşağıdakileri kontrol edin:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7246,40 +8410,19 @@ msgstr "" msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " -"they are the required filaments. If they are okay, press \"Confirm\" to start " -"printing." +"they are the required filaments. If they are okay, press \"Confirm\" to " +"start printing." msgstr "" "AMS eşlemelerinde bazı bilinmeyen filamentler var. Lütfen bunların gerekli " "filamentler olup olmadığını kontrol edin. Sorun yoksa, yazdırmayı başlatmak " "için \"Onayla\"ya basın." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "önceden ayarlanmış nozul: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "hafızaya alınan nozul: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Dilimlenmiş dosyadaki nozül çapınız hafızaya alınan nozül ile tutarlı değil. " -"Püskürtme ucunuzu yakın zamanda değiştirdiyseniz ayarları değiştirmek için " -"lütfen Cihaz > Yazıcı Parçaları’na gidin." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Yüksek sıcaklıktaki malzemeyi (%s malzeme) %s ile yazdırmak püskürtme ucu " -"hasarına neden olabilir" +msgid "Please check the following:" +msgstr "Lütfen aşağıdakileri kontrol edin:" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "Lütfen yukarıdaki hatayı düzeltin, aksi takdirde yazdırma devam edemez." +msgstr "" +"Lütfen yukarıdaki hatayı düzeltin, aksi takdirde yazdırma devam edemez." msgid "" "Please click the confirm button if you still want to proceed with printing." @@ -7288,27 +8431,208 @@ msgstr "" "tıklayın." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "Yazıcıya bağlanılıyor. Bağlantı işlemi sırasında iptal edilemiyor." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Kullanmaya dikkat edin! Dokulu PEI Plakasındaki akış kalibrasyonu, dağınık " -"yüzey nedeniyle başarısız olabilir." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Mikro Lidar kullanarak otomatik akış kalibrasyonu" +msgid "Preparing print job" +msgstr "Yazdırma için hazırlanıyor" -msgid "Modifying the device name" -msgstr "Cihaz adını değiştir" +msgid "The name length exceeds the limit." +msgstr "Ad uzunluğu sınırı aşıyor." -msgid "Bind with Pin Code" -msgstr "Pin Koduyla Bağla" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Yazıcı SD kartına gönder" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Yazıcıya bağlanamıyorsanız burayı tıklayın" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Oturum açma hesabı yok, yalnızca LAN modundaki yazıcılar görüntüleniyor" + +msgid "Connecting to server..." +msgstr "Sunucuya baglanıyor" + +msgid "Synchronizing device information..." +msgstr "Cihaz bilgileri senkronize ediliyor" + +msgid "Synchronizing device information timed out." +msgstr "Cihaz bilgilerinin senkronize edilmesi zaman aşımı" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "Yazıcı ürün yazılımını güncellerken yazdırma işi gönderilemiyor" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Yazıcı talimatları yürütüyor. Lütfen bittikten sonra yazdırmayı yeniden " +"başlatın" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Yazdırma işi, ürün yazılımının güncellenmesi gereken bir yazıcıya " +"gönderilemiyor." + +msgid "Cannot send a print job for an empty plate." +msgstr "Boş kalıp için yazdırma işi gönderilemiyor" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Bu yazıcı tüm kalıpların yazdırılmasını desteklemiyor" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Yükseltme devam ederken yazdırma görevi gönderilemiyor" @@ -7316,14 +8640,14 @@ msgstr "Yükseltme devam ederken yazdırma görevi gönderilemiyor" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Seçilen yazıcı, seçilen yazıcı ön ayarlarıyla uyumlu değil." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Yazıcı SD kartına gönderilmeden önce bir SD kartın takılması gerekir." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "Yazıcının Snapmaker Orca ile aynı LAN'da olması gerekir." -msgid "The printer does not support sending to printer SD card." -msgstr "Yazıcı, yazıcı SD kartına gönderimi desteklemiyor." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Dilimleme tamam." @@ -7383,7 +8707,7 @@ msgstr "Giriş başarısız oldu. Lütfen Pin Kodunu kontrol edin." msgid "Log in printer" msgstr "Yazıcıda oturum aç" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Bu yazıcıda geçerli hesapla oturum açmak ister misiniz?" msgid "Check the reason" @@ -7396,14 +8720,14 @@ msgid "Terms and Conditions" msgstr "Şartlar ve koşullar" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" -"Bir Bambu Lab cihazı satın aldığınız için teşekkür ederiz.Bambu Lab " -"cihazınızı kullanmadan önce lütfen şartlar ve koşulları okuyun.Bambu Lab " +"Bir Bambu Lab cihazı satın aldığınız için teşekkür ederiz. Bambu Lab " +"cihazınızı kullanmadan önce lütfen şartlar ve koşulları okuyun. Bambu Lab " "cihazınızı kullanmayı kabul etmek için tıklayarak, Gizlilik Politikasına ve " "Kullanım Koşullarına (topluca \"Şartlar\" olarak anılacaktır) uymayı kabul " "etmiş olursunuz. \"). Bambu Lab Gizlilik Politikasına uymuyorsanız veya bu " @@ -7430,7 +8754,7 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will not " +"logs, which may include information described in Privacy Policy. We will not " "collect any Personal Data by which an individual can be identified directly " "or indirectly, including without limitation names, addresses, payment " "information, or phone numbers. By enabling this service, you agree to these " @@ -7485,16 +8809,34 @@ msgid "Click to reset all settings to the last saved preset." msgstr "Tüm ayarları en son kaydedilen ön ayara sıfırlamak için tıklayın." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the model " -"without prime tower. Are you sure you want to disable prime tower?" +"A prime tower is required for smooth timelapse. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "Sorunsuz timeplace için Prime Tower gereklidir. Prime tower olmayan modelde " "kusurlar olabilir. Prime tower'ı devre dışı bırakmak istediğinizden emin " "misiniz?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the model " -"without prime tower. Do you want to enable prime tower?" +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Hem hassas Z yüksekliğini hem de başlangıç kulesini etkinleştirmek, " +"başlangıç kulesinin boyutunun artmasına neden olabilir. Yine de " +"etkinleştirmek istiyor musunuz?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " +"model without prime tower. Do you want to enable prime tower?" msgstr "" "Sorunsuz hızlandırılmış çekim için Prime Tower gereklidir. Prime tower " "olmayan modelde kusurlar olabilir. Prime tower'ı etkinleştirmek istiyor " @@ -7504,16 +8846,23 @@ msgid "Still print by object?" msgstr "Hala nesneye göre yazdırıyor musunuz?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Daha küçük destek hacmine ancak daha zayıf güce sahip deneysel bir tarz olan " -"\"Tree Slim\" ekledik.\n" -"Şunlarla kullanmanızı öneririz: 0 arayüz katmanı, 0 üst mesafe, 2 duvar." msgid "" -"Change these settings automatically? \n" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Destek arayüzü için destek malzemesi kullanırken aşağıdaki ayarları " +"öneririz:\n" +"0 üst Z mesafesi, 0 arayüz aralığı, iç içe geçmiş doğrusal desen ve bağımsız " +"destek katmanı yüksekliğini devre dışı bırak." + +msgid "" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7522,24 +8871,12 @@ msgstr "" "Hayır - Bu ayarları benim için değiştirme" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or using " -"support materials on interface." -msgstr "" -"\"Güçlü Ağaç\" ve \"Ağaç Hibrit\" stilleri için şu ayarları öneriyoruz: en az " -"2 arayüz katmanı, en az 0,1 mm üst z mesafesi veya arayüzde destek " -"malzemeleri kullanılması." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"Destek arayüzü için destek materyali kullanırken aşağıdaki ayarları " -"öneriyoruz:\n" -"0 üst z mesafesi, 0 arayüz aralığı, eş merkezli desen ve bağımsız destek " -"katmanı yüksekliğini devre dışı bırakma" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7554,6 +8891,20 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Bu seçeneği etkinleştirmek istediğinizden emin misiniz?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Dolgu desenleri genellikle, doğru baskı alınmasını ve istenen etkilerin (ör. " +"Gyroid, Kübik) elde edilmesini sağlamak için döndürme işlemini otomatik " +"olarak yapacak şekilde tasarlanmıştır. Mevcut seyrek dolgu desenini " +"döndürmek, yetersiz destekle sonuçlanabilir. Lütfen dikkatli ilerleyin ve " +"olası baskı sorunlarını iyice kontrol edin. Bu seçeneği etkinleştirmek " +"istediğinizden emin misiniz?" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7563,14 +8914,14 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Katman yüksekliği, Yazıcı Ayarları -> Ekstruder -> Katman yüksekliği " -"sınırları bölümündeki sınırı aşıyor bu durum baskı kalitesi sorunlarına neden " -"olabilir." +"sınırları bölümündeki sınırı aşıyor bu durum baskı kalitesi sorunlarına " +"neden olabilir." -msgid "Adjust to the set range automatically? \n" -msgstr "Ayarlanan aralığa otomatik olarak ayarlansın mı? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Ayarlanan aralığa otomatik olarak ayarlansın mı?\n" msgid "Adjust" msgstr "Ayarla" @@ -7580,8 +8931,8 @@ msgstr "Atla" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " "complications." msgstr "" "Deneysel özellik: Filament değişiklikleri sırasında, floşu en aza indirmek " @@ -7591,9 +8942,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Deneysel özellik: Filament değişiklikleri sırasında, filamanın en aza " "indirilmesi için filamanın daha büyük bir mesafeden geri çekilmesi ve " @@ -7604,14 +8955,89 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive\"-" -">\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" " "eklenmesi önerilir.\n" "Yapı plakasının boş konumuna sağ tıklayın ve \"İlkel Ekle\" -> \"Timelapse " "Temizleme Kulesi\" seçeneğini seçin." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Mevcut sistem ön ayarının, sistem ön ayarından ayrılacak bir kopyası " +"oluşturulacaktır." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "Geçerli özel ön ayar, ana sistem ön ayarından ayrılacaktır." + +msgid "Modifications to the current profile will be saved." +msgstr "Geçerli profilde yapılan değişiklikler kaydedilecektir." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Bu eylem geri alınamaz.\n" +"Devam etmek istiyor musunuz?" + +msgid "Detach preset" +msgstr "Ön ayarı ayır" + +msgid "This is a default preset." +msgstr "Bu varsayılan bir ön ayardır." + +msgid "This is a system preset." +msgstr "Bu bir sistem ön ayarıdır." + +msgid "Current preset is inherited from the default preset." +msgstr "Geçerli ön ayar, varsayılan ön ayardan devralınır." + +msgid "Current preset is inherited from" +msgstr "Geçerli ön ayar şu kaynaktan devralındı" + +msgid "It can't be deleted or modified." +msgstr "Silinemez veya değiştirilemez." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Herhangi bir değişiklik, bundan devralınan yeni bir ön ayar olarak " +"kaydedilmelidir." + +msgid "To do that please specify a new name for the preset." +msgstr "Bunu yapmak için lütfen ön ayar için yeni bir ad belirtin." + +msgid "Additional information:" +msgstr "Ek Bilgiler:" + +msgid "vendor" +msgstr "satıcı" + +msgid "printer model" +msgstr "yazıcı modeli" + +msgid "default print profile" +msgstr "varsayılan yazdırma profili" + +msgid "default filament profile" +msgstr "varsayılan filament profili" + +msgid "default SLA material profile" +msgstr "varsayılan SLA malzeme profili" + +msgid "default SLA print profile" +msgstr "varsayılan SLA yazdırma profili" + +msgid "full profile name" +msgstr "tam profil adı" + +msgid "symbolic profile name" +msgstr "sembolik profil adı" + msgid "Line width" msgstr "Katman Genişliği" @@ -7654,8 +9080,8 @@ msgid "" "the overhang degree range and wall speed is used" msgstr "" "Bu, çeşitli sarkma dereceleri için hızdır. Çıkıntı dereceleri çizgi " -"genişliğinin yüzdesi olarak ifade edilir. 0 hız, sarkma derecesi aralığı için " -"yavaşlamanın olmadığı anlamına gelir ve duvar hızı kullanılır" +"genişliğinin yüzdesi olarak ifade edilir. 0 hız, sarkma derecesi aralığı " +"için yavaşlamanın olmadığı anlamına gelir ve duvar hızı kullanılır" msgid "Bridge" msgstr "Köprü" @@ -7678,15 +9104,27 @@ msgstr "Raft" msgid "Support filament" msgstr "Destek Filamenti" +msgid "Support ironing" +msgstr "Destek Ütüleme" + msgid "Tree supports" msgstr "Ağaç destekler" -msgid "Skirt" -msgstr "Etek" +msgid "Multimaterial" +msgstr "Çoklu Malzeme" msgid "Prime tower" msgstr "Prime Kulesi" +msgid "Filament for Features" +msgstr "Filament Kullanım Alanları" + +msgid "Ooze prevention" +msgstr "Sızıntı Önleme" + +msgid "Skirt" +msgstr "Etek" + msgid "Special mode" msgstr "Özel Mod" @@ -7739,76 +9177,83 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" "Bu filamentin önerilen Nozul sıcaklığı aralığı. 0 ayar yok anlamına gelir" +msgid "Flow ratio and Pressure Advance" +msgstr "Akış Oranı Ve Basınç İlerlemesi" + msgid "Print chamber temperature" msgstr "Baskı Odası Sıcaklığı" msgid "Print temperature" msgstr "Yazdırma Sıcaklığı" -msgid "Nozzle" -msgstr "Nozul" - msgid "Nozzle temperature when printing" msgstr "Yazdırma sırasında nozul sıcaklığı" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "Cool Plate (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Cool Plate SuperTack takılıyken yatak sıcaklığı. 0 değeri, filamentin Cool " +"Plate SuperTack üzerine baskıyı desteklemediği anlamına gelir." + +msgid "Cool Plate" msgstr "Soğuk plaka" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament does " -"not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -"Soğutma plakası takıldığında yatak sıcaklığı. 0 değeri, filamentin Cool Plate " -"üzerine yazdırmayı desteklemediği anlamına gelir" +"Cool Plate takıldığında yatak sıcaklığı. 0 değeri, filamentin Cool Plate " +"üzerine yazdırmayı desteklemediği anlamına gelir." -msgid "Textured Cool plate" -msgstr "Dokulu Soğuk Plaka" +msgid "Textured Cool Plate" +msgstr "Textured Cool Plate" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" -"Soğuk plaka takıldığında yatak sıcaklığı. 0 Değeri, filamentin Dokulu Soğuk " -"Plaka üzerine yazdırmayı desteklemediği anlamına gelir." +"Cool Plate takıldığında yatak sıcaklığı. 0 Değeri, filamentin Textured Cool " +"Plate üzerine yazdırmayı desteklemediği anlamına gelir." -msgid "Engineering plate" -msgstr "Mühendislik plakası" +msgid "Engineering Plate" +msgstr "Engineering Plate" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" -"Mühendislik plakası takıldığında yatak sıcaklığı. Değer 0, filamentin " -"Mühendislik Plakasına yazdırmayı desteklemediği anlamına gelir" +"Engineering Plate takıldığında yatak sıcaklığı. Değer 0, filamentin " +"Engineering Plate yazdırmayı desteklemediği anlamına gelir." msgid "Smooth PEI Plate / High Temp Plate" -msgstr "Düz PEI Plakası / Yüksek Sıcaklık Plakası" +msgstr "Smooth PEI Plate / High Temp Plate" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"Düz PEI Plakası/Yüksek Sıcaklık Plakası takılığın da yatak sıcaklığı. 0 " -"Değeri, filamentin Düz PEI Plakası/Yüksek Sıcaklık Plakası üzerin de baskı " -"yapmayı desteklemediği anlamına gelir." +"Smooth PEI Plate / High Temp Plate takılığın da yatak sıcaklığı. 0 Değeri, " +"filamentin Smooth PEI Plate / High Temp Plate üzerine baskı yapmayı " +"desteklemediği anlamına gelir." msgid "Textured PEI Plate" -msgstr "Dokulu PEI Plaka" +msgstr "Textured PEI Plate" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Dokulu PEI Plaka takıldığın da yatak sıcaklığı. 0 Değeri, filamentin Dokulu " -"PEI Plaka üzerine yazdırmayı desteklemediği anlamına gelir" +"Textured PEI Plate takıldığın da yatak sıcaklığı. 0 Değeri, filamentin " +"Textured PEI Plate üzerine yazdırmayı desteklemediği anlamına gelir." msgid "Volumetric speed limitation" msgstr "Hacimsel Hız Sınırlaması" -msgid "Cooling" -msgstr "Soğutma" - msgid "Cooling for specific layer" msgstr "Belirli Katman İçin Soğutma" @@ -7840,16 +9285,16 @@ msgstr "" "maksimum olacaktır" msgid "Auxiliary part cooling fan" -msgstr "Yardımcı parça soğutma fanı" +msgstr "Yardımcı Parça Soğutma Fanı" msgid "Exhaust fan" msgstr "Egzos Fanı" msgid "During print" -msgstr "Baskı boyunca" +msgstr "Baskı sırasında" msgid "Complete print" -msgstr "Tam baskı" +msgstr "Baskı tamamlanınca" msgid "Filament start G-code" msgstr "Filament Başlangıç G Kodu" @@ -7857,25 +9302,34 @@ msgstr "Filament Başlangıç G Kodu" msgid "Filament end G-code" msgstr "Filament Bitiş G Kodu" -msgid "Multimaterial" -msgstr "Çoklu Malzeme" - msgid "Wipe tower parameters" msgstr "Silme Kulesi Parametreleri" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Tek Ekstruderli MM Yazıcılarda Araç Değiştirme Parametreleri" -msgid "Ramming settings" -msgstr "Sıkıştırma ayarları" +msgid "Set" +msgstr "Ayarla" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Çoklu Ekstruder MM Yazıcılarda Araç Değiştirme Parametreleri" +msgid "Dependencies" +msgstr "Bağımlılıklar" + +msgid "Compatible printers" +msgstr "Uyumlu yazıcılar" + +msgid "Compatible process profiles" +msgstr "Uyumlu süreç profilleri" + msgid "Printable space" msgstr "Plaka Ayarı" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "%1% parametresi için geçersiz değer sağlandı: %2%" @@ -7898,7 +9352,7 @@ msgstr "Uyarlanabilir Yatak Ağı" msgid "Accessory" msgstr "Aksesuar" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "Yazıcı G-kod" msgid "Machine start G-code" @@ -7916,8 +9370,11 @@ msgstr "Katman Değişimi Öncesi G-kod" msgid "Layer change G-code" msgstr "Katman Değişimi G-kod" -msgid "Time lapse G-code" -msgstr "Time Lapse G-code" +msgid "Timelapse G-code" +msgstr "Timelapse G-kod" + +msgid "Clumping Detection G-code" +msgstr "" msgid "Change filament G-code" msgstr "Filament Değişimi G-kod" @@ -7937,6 +9394,12 @@ msgstr "Hareket" msgid "Normal" msgstr "Normal" +msgid "Resonance Avoidance" +msgstr "Rezonans Kaçınma" + +msgid "Resonance Avoidance Speed" +msgstr "Rezonans kaçınma hızı" + msgid "Speed limitation" msgstr "Hız Sınırlaması" @@ -7946,20 +9409,44 @@ msgstr "Hızlanma Sınırlaması" msgid "Jerk limitation" msgstr "Sarsıntı Sınırlaması" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Tek Ekstruder Çoklu Malzeme Kurulumu" +msgid "Number of extruders of the printer." +msgstr "Yazıcının ekstruder sayısı." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Tek Ekstruder Çoklu Malzeme seçilir, \n" +"ve tüm ekstrüderlerin aynı çapa sahip olması gerekir.\n" +"Tüm ekstruderlerin çapını ilk ekstruder bozul çapı değerine değiştirmek " +"ister misiniz?" + +msgid "Nozzle diameter" +msgstr "Nozul çapı" + msgid "Wipe tower" msgstr "Silme Kulesi" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "Tek Ekstruder Çoklu Malzeme Parametreleri" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Bu tek ekstruderli çok malzemeli bir yazıcıdır, tüm ekstruderlerin çapları " +"yeni değere ayarlanacaktır. Devam etmek istiyor musunuz?" + msgid "Layer height limits" msgstr "Katman Yüksekliği Sınırları" -msgid "Lift Z Enforcement" -msgstr "Z Kaldırma Uygulaması" +msgid "Z-Hop" +msgstr "Z Sıçraması" msgid "Retraction when switching material" msgstr "Malzemeyi Değiştirirken Geri Çekme" @@ -7976,6 +9463,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "Yazılımsal Geri Çekme" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "Söküldü" @@ -7984,10 +9479,10 @@ msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" -"%d Filament Ön Ayarı ve %d İşlem Ön Ayarı bu yazıcıya eklenmiştir.Yazıcı " +"%d Filament Ön Ayarı ve %d İşlem Ön Ayarı bu yazıcıya eklenmiştir. Yazıcı " "silinirse bu ön ayarlar silinir." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "Diğer ön ayarlar tarafından devralınan ön ayarlar silinemez!" msgid "The following presets inherit this preset." @@ -8005,24 +9500,17 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "Aşağıdaki ön ayar da silinecektir." msgstr[1] "Aşağıdaki ön ayarlar da silinecektir." -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Seçilen ön ayarı silmek istediğinizden emin misiniz? \n" -"Eğer ön ayar, şu anda yazıcınızda kullanılan bir filamente karşılık " -"geliyorsa, lütfen o slot için filament bilgilerini sıfırlayın." - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Seçilen ön ayarı %1% yaptığınızdan emin misiniz?" -msgid "All" -msgstr "Tümü" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Ayarla" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "Geçerli değeri sıfırlamak ve genel değere eklemek için tıklayın." @@ -8098,22 +9586,22 @@ msgstr "\"%1%\" ön ayarı aşağıdaki kaydedilmemiş değişiklikleri içeriyo #, boost-format msgid "" -"Preset \"%1%\" is not compatible with the new printer profile and it contains " -"the following unsaved changes:" +"Preset \"%1%\" is not compatible with the new printer profile and it " +"contains the following unsaved changes:" msgstr "" "Ön ayar \"%1%\", yeni yazıcı profiliyle uyumlu değil ve aşağıdaki " "kaydedilmemiş değişiklikleri içeriyor:" #, boost-format msgid "" -"Preset \"%1%\" is not compatible with the new process profile and it contains " -"the following unsaved changes:" +"Preset \"%1%\" is not compatible with the new process profile and it " +"contains the following unsaved changes:" msgstr "" "Ön ayar \"%1%\", yeni işlem profiliyle uyumlu değil ve aşağıdaki " "kaydedilmemiş değişiklikleri içeriyor:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "“%1%” ön ayarının bazı ayarlarını değiştirdiniz." msgid "" @@ -8141,15 +9629,12 @@ msgid "" "the modified values to the new project" msgstr "" "\n" -"Değiştirdiğiniz ön ayar değerlerini atabilir veya değiştirilen değerleri yeni " -"projeye aktarmayı seçebilirsiniz." +"Değiştirdiğiniz ön ayar değerlerini atabilir veya değiştirilen değerleri " +"yeni projeye aktarmayı seçebilirsiniz" msgid "Extruders count" msgstr "Ekstruder sayısı" -msgid "General" -msgstr "Genel" - msgid "Capabilities" msgstr "Yetenekler" @@ -8166,19 +9651,19 @@ msgstr "" msgid "" "Transfer the selected options from left preset to the right.\n" -"Note: New modified presets will be selected in settings tabs after close this " -"dialog." +"Note: New modified presets will be selected in settings tabs after close " +"this dialog." msgstr "" "Seçilen seçenekleri sol ön ayardan sağa aktarın.\n" -"Not: Bu iletişim kutusunu kapattıktan sonra ayarlar sekmelerinde değiştirilen " -"yeni ön ayarlar seçilecektir." +"Not: Bu iletişim kutusunu kapattıktan sonra ayarlar sekmelerinde " +"değiştirilen yeni ön ayarlar seçilecektir." msgid "Transfer values from left to right" msgstr "Değerleri soldan sağa aktarın" msgid "" -"If enabled, this dialog can be used for transfer selected values from left to " -"right preset." +"If enabled, this dialog can be used for transfer selected values from left " +"to right preset." msgstr "" "Etkinleştirilirse, bu iletişim kutusu seçilen değerleri soldan sağa ön ayara " "aktarmak için kullanılabilir." @@ -8214,6 +9699,9 @@ msgstr "Yazar" msgid "Model Name" msgstr "Model adı" +msgid "Description:" +msgstr "Açıklama:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Güncelleme" @@ -8224,33 +9712,27 @@ msgstr "Yeni bir sürüm mevcut" msgid "Configuration update" msgstr "Yapılandırma güncellemesi" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Yeni bir konfigürasyon paketi mevcut. Kurmak istiyor musunuz?" -msgid "Description:" -msgstr "Açıklama:" - msgid "Configuration incompatible" msgstr "Yapılandırma uyumsuz" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "yapılandırma paketi mevcut uygulamayla uyumlu değil." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Yapılandırma paketi mevcut uygulamayla uyumlu değil.\n" -"%s yapılandırma paketini güncelleyecek, Aksi halde başlatılamayacak" +"%s yapılandırma paketini güncelleyecek, Aksi halde başlatılamayacak." #, c-format, boost-format msgid "Exit %s" msgstr "%s'den çık" -msgid "the Configuration package is incompatible with current APP." -msgstr "yapılandırma paketi mevcut APP ile uyumlu değil." - msgid "Configuration updates" msgstr "Yapılandırma güncellemeleri" @@ -8260,24 +9742,41 @@ msgstr "Güncelleme mevcut değil." msgid "The configuration is up to date." msgstr "Yapılandırma güncel." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Obj dosyası renkli olarak içe aktar" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "Renk sayısını belirtin:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "Renk sayısı aralıkta olmalıdır [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "Tavsiye edilir " -msgid "Current filament colors:" -msgstr "Mevcut filament renkleri:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Hızlı ayar:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "Renk uyumu" @@ -8288,42 +9787,186 @@ msgstr "Yaklaşık renk eşleşmesi." msgid "Append" msgstr "Ekle" -msgid "Add consumable extruder after existing extruders." -msgstr "Mevcut ekstrüderlerden sonra yeni sarf malzemesi ekstrüderi ekleyin." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "Eşlenmiş ekstrüderleri sıfırlayın." -msgid "Cluster colors" -msgstr "Küme renkleri" - -msgid "Map Filament" -msgstr "Filamenti Eşle" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Not: Renk seçildi, devam etmek için Tamam'ı seçebilirsiniz\n" -" veya manuel olarak ayarlayabilirsiniz." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "AMS kullanın" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Seçilen yazıcı (%s), dilimleyicideki (%s) seçilen yazıcı profiliyle uyumlu " +"değil." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse desteklenmiyor çünkü Baskı sıralaması \"Nesneye\" göre olarak " +"ayarlandı." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Uyarı: Yeni eklenen ve\n" -" mevcut ekstrüderlerin sayısı 16'yı aşıyor." msgid "Ramming customization" msgstr "Sıkıştırma özelleştirme" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the unloaded " -"filament so it does not prevent insertion of the new filament and can itself " -"be reinserted later. This phase is important and different materials can " -"require different extrusion speeds to get the good shape. For this reason, " -"the extrusion rates during ramming are adjustable.\n" +"extruder MM printer. Its purpose is to properly shape the end of the " +"unloaded filament so it does not prevent insertion of the new filament and " +"can itself be reinserted later. This phase is important and different " +"materials can require different extrusion speeds to get the good shape. For " +"this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." @@ -8339,37 +9982,24 @@ msgstr "" "Bu uzman düzeyinde bir ayardır, yanlış ayarlama muhtemelen sıkışmalara, " "ekstruder tekerleğinin filamente sürtünmesine vb. yol açacaktır." -msgid "Total ramming time" -msgstr "Toplam sıkıştırma süresi" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Sabit akış hızı için sürüklerken %1% basılı tutun." -msgid "s" -msgstr "s" +msgid "Total ramming" +msgstr "Toplam çarpma" -msgid "Total rammed volume" -msgstr "Toplam sıkıştırılmış hacim" +msgid "Volume" +msgstr "Hacim" -msgid "Ramming line width" -msgstr "Sıkıştırma hattı genişliği" - -msgid "Ramming line spacing" -msgstr "Sıkıştırma hattı aralığı" - -msgid "Auto-Calc" -msgstr "Otomatik Hesaplama" - -msgid "Re-calculate" -msgstr "Tekrar Hesaplama" - -msgid "Flushing volumes for filament change" -msgstr "Filament değişimi için temizleme hacmi" +msgid "Ramming line" +msgstr "Çarpma hattı" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca, filamentlerin rengi her değiştiğinde yıkama hacimlerinizi yeniden " -"hesaplar. Otomatik hesaplamayı Snapmaker Orca > Tercihler bölümünden devre dışı " -"bırakabilirsiniz." msgid "Flushing volume (mm³) for each filament pair." msgstr "Her filament çifti için yıkama hacmi (mm³)." @@ -8382,23 +10012,23 @@ msgstr "Öneri: Yıkama Hacmi [%d, %d] aralığında" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Çarpan [%.2f, %.2f] aralığında olmalıdır." +msgid "Re-calculate" +msgstr "Tekrar Hesaplama" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Çarpan" -msgid "unloaded" -msgstr "boşaltılmış" +msgid "Flushing volumes for filament change" +msgstr "Filament değişimi için temizleme hacmi" -msgid "loaded" -msgstr "yüklenmiş" - -msgid "Filament #" -msgstr "Filament #" - -msgid "From" -msgstr "İtibaren" - -msgid "To" -msgstr "İle" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8408,17 +10038,17 @@ msgstr "" "‘Windows Media Player’ı etkinleştirmek istiyor musunuz?" msgid "" -"BambuSource has not correctly been registered for media playing! Press Yes to " -"re-register it. You will be promoted twice" +"BambuSource has not correctly been registered for media playing! Press Yes " +"to re-register it. You will be promoted twice" msgstr "" "BambuSource medya oynatımı için doğru şekilde kaydedilmemiş! Yeniden " -"kaydetmek için Evet’e basın." +"kaydetmek için Evet’e basın" msgid "" -"Missing BambuSource component registered for media playing! Please re-install " -"BambuStutio or seek after-sales help." +"Missing BambuSource component registered for media playing! Please re-" +"install BambuStudio or seek after-sales help." msgstr "" -"Medya oynatma için kayıtlı BambuSource bileşeni eksik! Lütfen BambuStutio’yu " +"Medya oynatma için kayıtlı BambuSource bileşeni eksik! Lütfen BambuStudio’yu " "yeniden yükleyin veya satış sonrası yardım isteyin." msgid "" @@ -8429,9 +10059,9 @@ msgstr "" "çalışmayabilir! Düzeltmek için Evet’e basın." msgid "" -"Your system is missing H.264 codecs for GStreamer, which are required to play " -"video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav " -"packages, then restart Snapmaker Orca?)" +"Your system is missing H.264 codecs for GStreamer, which are required to " +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"libav packages, then restart Snapmaker Orca?)" msgstr "" "Sisteminizde video oynatmak için gerekli olan GStreamer H.264 codec " "bileşenleri eksik. (gstreamer1.0-plugins-bad veya gstreamer1.0-libav " @@ -8461,12 +10091,6 @@ msgstr "Nesne listesi" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "STL/STEP/3MF/OBJ/AMF dosyalarından geometri verilerini içe aktarın" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Panodan yapıştır" @@ -8482,69 +10106,42 @@ msgstr "Klavye kısayolları listesini göster" msgid "Global shortcuts" msgstr "Genel kısayollar" -msgid "Rotate View" -msgstr "Görüntüyü döndür" - msgid "Pan View" msgstr "Pan Görünümü" -msgid "Mouse wheel" -msgstr "Fare tekerleği" +msgid "Rotate View" +msgstr "Görüntüyü döndür" msgid "Zoom View" msgstr "Zoom Görünümü" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Seçilen nesneleri veya tüm nesneleri otomatik olarak yönlendirir. Seçilen " -"nesneler varsa, yalnızca seçilenleri yönlendirir. Aksi takdirde, geçerli " -"diskteki tüm nesneleri yönlendirir." +"nesneler varsa, yalnızca seçilenleri yönlendirir. Aksi takdirde mevcut " +"projedeki tüm nesneler yönlendirilecektir." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Aktif plakadaki tüm nesneleri otomatik olarak yönlendirir." msgid "Collapse/Expand the sidebar" msgstr "Kenar çubuğunu daralt/genişlet" -msgid "⌘+Any arrow" -msgstr "⌘+Herhangi bir ok" +msgid "Any arrow" +msgstr "Herhangi bir ok" msgid "Movement in camera space" msgstr "Kamera alanında hareket" -msgid "⌥+Left mouse button" -msgstr "⌥+Sol fare düğmesi" - msgid "Select a part" msgstr "Parça seçin" -msgid "⌘+Left mouse button" -msgstr "⌘+Sol fare düğmesi" - msgid "Select multiple objects" msgstr "Birden fazla nesne seç" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+Herhangi bir yön tuşu" - -msgid "Alt+Left mouse button" -msgstr "Alt+Sol fare düğmesi" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Sol fare düğmesi" - -msgid "Shift+Left mouse button" -msgstr "Shift+Sol fare düğmesi" - msgid "Select objects by rectangle" msgstr "Nesneleri dikdörtgene göre seç" @@ -8572,9 +10169,6 @@ msgstr "Sağ Yön Tuşu" msgid "Move selection 10 mm in positive X direction" msgstr "Seçimi pozitif X yönünde 10 mm taşı" -msgid "Shift+Any arrow" -msgstr "Shift+Herhangi bir ok tuşu" - msgid "Movement step set to 1 mm" msgstr "Hareket adımı 1 mm'ye ayarlandı" @@ -8608,17 +10202,23 @@ msgstr "Tüm nesneleri seç" msgid "Gizmo move" msgstr "Gizmo hareket" +msgid "Gizmo rotate" +msgstr "Gizmo döndürme" + msgid "Gizmo scale" msgstr "Gizmo ölçek" -msgid "Gizmo rotate" -msgstr "Gizmo döndürme" +msgid "Gizmo place face on bed" +msgstr "Gizmo yüzünüzü yatağa yerleştirin" msgid "Gizmo cut" msgstr "Gizmo kesim" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Yüzünüzü yatağa yerleştirin" +msgid "Gizmo mesh boolean" +msgstr "Gizmo mesh bölme" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM boyama ile uygulanan pütürlü yüzey" msgid "Gizmo SLA support points" msgstr "Gizmo SLA destek noktaları" @@ -8626,8 +10226,17 @@ msgstr "Gizmo SLA destek noktaları" msgid "Gizmo FDM paint-on seam" msgstr "Gizmo FDM boyalı dikiş" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Metin kabartma / kazıma" +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo metin kabartma/kazıma" + +msgid "Gizmo measure" +msgstr "Gizmo ölçüm" + +msgid "Gizmo assemble" +msgstr "Gizmo birleştir" + +msgid "Gizmo brim ears" +msgstr "Gizmo lenarlık kulakları" msgid "Zoom in" msgstr "Yakınlaştır" @@ -8644,32 +10253,20 @@ msgstr "Plakacı" msgid "Move: press to snap by 1mm" msgstr "Hareket Ettir: 1 mm kadar yaslamak için basın" -msgid "⌘+Mouse wheel" -msgstr "⌘+Fare tekerleği" - msgid "Support/Color Painting: adjust pen radius" msgstr "Destek/Renkli Boyama: kalem yarıçapını ayarlayın" -msgid "⌥+Mouse wheel" -msgstr "⌥+Fare tekerleği" - msgid "Support/Color Painting: adjust section position" msgstr "Destek/Renkli Boyama: bölüm konumunu ayarlayın" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Fare tekerleği" - -msgid "Alt+Mouse wheel" -msgstr "Alt+Fare tekerleği" - msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Nesneler ve parçalar için ekstruder numarasını ayarlayın" -msgid "Delete objects, parts, modifiers " -msgstr "Nesneleri, parçaları, değiştiricileri silin " +msgid "Delete objects, parts, modifiers" +msgstr "Nesneleri, parçaları, değiştiricileri silin" msgid "Select the object/part and press space to change the name" msgstr "Nesneyi/parçayı seçin ve adını değiştirmek için boşluk tuşuna basın" @@ -8698,17 +10295,14 @@ msgstr "Yatay kaydırıcı - Etkin başparmağı sağa taşı" msgid "On/Off one layer mode of the vertical slider" msgstr "Dikey kaydırıcının tek katman modunu açma/kapama" -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "G-kodu penceresini aç/kapat" msgid "Move slider 5x faster" msgstr "Kaydırıcıyı 5 kat daha hızlı hareket ettirin" -msgid "Shift+Mouse wheel" -msgstr "Shift+Fare tekerleği" - msgid "Horizontal slider - Move to start position" -msgstr "Yatay kaydırıcı - Başlangıç ​​konumuna taşıyın" +msgstr "Yatay kaydırıcı - Başlangıç konumuna taşıyın" msgid "Horizontal slider - Move to last position" msgstr "Yatay kaydırıcı - Son konuma git" @@ -8717,7 +10311,7 @@ msgid "Release Note" msgstr "Sürüm notu" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "sürüm %s güncelleme bilgileri:" msgid "Network plug-in update" @@ -8726,11 +10320,11 @@ msgstr "Ağ eklentisi güncellemesi" msgid "" "Click OK to update the Network plug-in when Snapmaker Orca launches next time." msgstr "" -"Snapmaker Orca bir sonraki sefer başlatıldığında Ağ eklentisini güncellemek için " -"Tamam'a tıklayın." +"Snapmaker Orca bir sonraki sefer başlatıldığında Ağ eklentisini güncellemek " +"için Tamam'a tıklayın." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Yeni bir Ağ eklentisi(%s) mevcut, Yüklemek istiyor musunuz?" msgid "New version of Snapmaker Orca" @@ -8739,61 +10333,29 @@ msgstr "Snapmaker Orca’ın yeni versiyonu" msgid "Skip this Version" msgstr "Bu versiyonu atla" -msgid "Done" -msgstr "Tamamlandı" - -msgid "resume" -msgstr "Devam et" - -msgid "Resume Printing" -msgstr "Yazdırmaya Devam Et" - -msgid "Resume Printing(defects acceptable)" -msgstr "Yazdırmaya Devam Et (kusurlar kabul edilebilir)" - -msgid "Resume Printing(problem solved)" -msgstr "Yazdırmaya Devam Et (sorun çözüldü)" - -msgid "Stop Printing" -msgstr "Yazdırmayı Durdur" - -msgid "Check Assistant" -msgstr "Kontrol Asistanı" - -msgid "Filament Extruded, Continue" -msgstr "Filament Ekstrüde Edildi, Devam Et" - -msgid "Not Extruded Yet, Retry" -msgstr "Henüz Ekstrüde Edilmedi, Tekrar Deneyin" - -msgid "Finished, Continue" -msgstr "Bitti, Devam Et" - -msgid "Load Filament" -msgstr "Filament Yükle" - -msgid "Filament Loaded, Resume" -msgstr "Filament Yüklendi, Devam Et" - -msgid "View Liveview" -msgstr "Canlı Önizlemeyi Görüntüle" - msgid "Confirm and Update Nozzle" msgstr "Nozulu Onaylayın ve Güncelleyin" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN Bağlantısı Başarısız (Yazdırma dosyası gönderiliyor)" - -msgid "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." -msgstr "" -"Adım 1, lütfen Snapmaker Orca ile yazıcınızın aynı LAN'da olduğunu doğrulayın." +msgid "Connect the printer using IP and access code" +msgstr "IP ve erişim kodunu kullanarak yazıcıyı bağlayın" msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" + +msgid "" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Adım 2, aşağıdaki IP ve Erişim Kodu yazıcınızdaki gerçek değerlerden " -"farklıysa lütfen bunları düzeltin." msgid "IP" msgstr "IP" @@ -8801,19 +10363,42 @@ msgstr "IP" msgid "Access Code" msgstr "Giriş kodu" +msgid "Printer model" +msgstr "Yazıcı modeli" + +msgid "Printer name" +msgstr "Yazıcı adı" + msgid "Where to find your printer's IP and Access Code?" msgstr "Yazıcınızın IP'sini ve Erişim Kodunu nerede bulabilirsiniz?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Adım 3: Paket kaybını ve gecikmeyi kontrol etmek için IP adresine ping atın." +msgid "Connect" +msgstr "Bağlan" -msgid "Test" -msgstr "Test" +msgid "Manual Setup" +msgstr "Manuel Kurulum" msgid "IP and Access Code Verified! You may close the window" msgstr "IP ve Erişim Kodu Doğrulandı! Pencereyi kapatabilirsin" +msgid "connecting..." +msgstr "bağlanıyor…" + +msgid "Failed to connect to printer." +msgstr "Yazıcıya bağlanılamadı." + +msgid "Failed to publish login request." +msgstr "Oturum açma isteği yayınlanamadı." + +msgid "The printer has already been bound." +msgstr "Yazıcı önceden bağlanmış." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "Yazıcı modu yanlış, lütfen Yalnızca LAN’a geçin." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Yazıcıya bağlanılıyor… İletişim kutusu daha sonra kapanacaktır" + msgid "Connection failed, please double check IP and Access Code" msgstr "" "Bağlantı başarısız oldu, lütfen IP'yi ve Erişim Kodunu tekrar kontrol edin" @@ -8825,36 +10410,56 @@ msgstr "" "Bağlantı başarısız oldu! IP'niz ve Erişim Kodunuz doğruysa \n" "ağ sorunlarını gidermek için lütfen 3. adıma geçin" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "Hava Pompası" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "Kesim Modülü" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Model:" -msgid "Serial:" -msgstr "Seri:" - -msgid "Version:" -msgstr "Sürüm:" - msgid "Update firmware" msgstr "Ürün yazılımını güncelle" msgid "Beta version" msgstr "Beta sürüm" -msgid "Latest version" -msgstr "Son sürüm" - msgid "Updating" msgstr "Güncelleniyor" -msgid "Updating failed" +msgid "Update failed" msgstr "Güncelleme başarısız oldu" -msgid "Updating successful" +msgid "Update successful" msgstr "Güncelleme başarılı" msgid "" -"Are you sure you want to update? This will take about 10 minutes. Do not turn " -"off the power while the printer is updating." +"Are you sure you want to update? This will take about 10 minutes. Do not " +"turn off the power while the printer is updating." msgstr "" "Güncellemek istediğinizden emin misiniz? Bu yaklaşık 10 dakika sürecektir. " "Yazıcı güncellenirken gücü kapatmayın." @@ -8873,14 +10478,15 @@ msgid "" "printing. Do you want to update now? You can also update later on printer or " "update next time starting Orca." msgstr "" -"Ürün yazılımı sürümü anormal. Yazdırmadan önce onarım ve güncelleme yapılması " -"gerekir. Şimdi güncellemek istiyor musunuz? Ayrıca daha sonra yazıcıda " -"güncelleyebilir veya stüdyoyu bir sonraki başlatışınızda güncelleyebilirsiniz." +"Ürün yazılımı sürümü anormal. Yazdırmadan önce onarım ve güncelleme " +"yapılması gerekir. Şimdi güncellemek istiyor musunuz? Ayrıca daha sonra " +"yazıcıda güncelleyebilir veya stüdyoyu bir sonraki başlatışınızda " +"güncelleyebilirsiniz." msgid "Extension Board" msgstr "Uzatma Kartı" -msgid "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." msgstr "Nesneleri 3mf'ye kaydetme işlemi başarısız oldu." msgid "Only Windows 10 is supported." @@ -8904,23 +10510,23 @@ msgstr "Onarım başarısız oldu." msgid "Loading repaired objects" msgstr "Onarılan nesnelerin yüklenmesi" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "3mf dosyasını dışa aktarma işlemi başarısız oldu" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "3mf dosyasını içe aktarma başarısız oldu" -msgid "Repaired 3mf file does not contain any object" -msgstr "Onarılan 3mf dosyası herhangi bir nesne içermiyor" +msgid "Repaired 3MF file does not contain any object" +msgstr "Onarılan 3MF dosyası herhangi bir nesne içermiyor" -msgid "Repaired 3mf file contains more than one object" -msgstr "Onarılan 3mf dosyası birden fazla nesne içeriyor" +msgid "Repaired 3MF file contains more than one object" +msgstr "Onarılan 3MF dosyası birden fazla nesne içeriyor" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Onarılan 3mf dosyası herhangi bir birim içermiyor" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Onarılan 3MF dosyası herhangi bir birim içermiyor" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Onarılan 3mf dosyası birden fazla birim içeriyor" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Onarılan 3MF dosyası birden fazla birim içeriyor" msgid "Repair finished" msgstr "Onarım tamamlandı" @@ -8938,7 +10544,7 @@ msgstr "" "etmeniz gerekir." msgid "Configuration package: " -msgstr "Yapılandırma paketi:" +msgstr "Yapılandırma paketi: " msgid " updated to " msgstr " güncellendi " @@ -8972,7 +10578,13 @@ msgid "No object can be printed. Maybe too small" msgstr "Hiçbir nesne yazdırılamaz. Belki çok küçük" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Baskınız hazırlama bölgelerine çok yakın. Çarpışma olmadığından emin olun." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Geçersiz özel G kodu için gcode oluşturulamadı.\n" @@ -8986,6 +10598,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "G kodu oluşturuluyor: katman %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "İç duvar" @@ -9023,12 +10644,12 @@ msgid "Multiple" msgstr "Çoklu" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "%1% çizgi genişliği hesaplanamadı. \"%2%\" değeri alınamıyor " msgid "" -"Invalid spacing supplied to Flow::with_spacing(), check your layer height and " -"extrusion width" +"Invalid spacing supplied to Flow::with_spacing(), check your layer height " +"and extrusion width" msgstr "" "Flow::with_spacing()'e sağlanan geçersiz boşluk, kat yüksekliğinizi ve " "ekstrüzyon genişliğinizi kontrol edin" @@ -9141,15 +10762,16 @@ msgstr "%1% diğerlerine çok yakın ve çarpışmalara neden olabilir." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% çok uzun ve çarpışmalara neden olacak." -msgid " is too close to others, there may be collisions when printing." -msgstr "" -" başkalarına çok yakınsa, yazdırma sırasında çarpışmalar meydana gelebilir." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " Hariç tutma alanına çok yakın olduğundan yazdırma sırasında çarpışmalar " "meydana gelebilir." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "Başbakan Kulesi" @@ -9160,12 +10782,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr " dışlama alanına çok yakın ve çarpışmalara neden olacak.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged during " -"printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Birlikte büyük sıcaklık farkına sahip birden fazla filament basılamaz. Aksi " -"takdirde baskı sırasında ekstruder ve nozul tıkanabilir veya hasar görebilir" msgid "No extrusions under current settings." msgstr "Mevcut ayarlarda ekstrüzyon yok." @@ -9177,6 +10821,15 @@ msgstr "" "\"Nesneye göre\" dizisi etkinleştirildiğinde, hızlandırılmış çekimin yumuşak " "modu desteklenmez." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9189,14 +10842,22 @@ msgid "" "materials." msgstr "Bir nesne birden fazla malzeme içerdiğinde spiral vazo modu çalışmaz." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"%1% nesnesinin kendisi yapı hacmine uysa da, malzeme büzülme telafisi " +"nedeniyle maksimum yapı hacmi yüksekliğini aşıyor." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "%1% nesnesi maksimum yapı hacmi yüksekliğini aşıyor." #, boost-format msgid "" -"While the object %1% itself fits the build volume, its last layer exceeds the " -"maximum build volume height." +"While the object %1% itself fits the build volume, its last layer exceeds " +"the maximum build volume height." msgstr "" "%1% nesnesinin kendisi yapı hacmine uysa da, son katmanı maksimum yapı hacmi " "yüksekliğini aşıyor." @@ -9212,11 +10873,13 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Değişken katman yüksekliği Organik desteklerle desteklenmez." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Ana kule etkinleştirildiğinde farklı nozul çaplarına ve farklı filament " -"çaplarına izin verilmez." +"Farklı püskürtme ucu çapları ve farklı filaman çapları, ana kule " +"etkinleştirildiğinde iyi çalışmayabilir. Oldukça deneysel olduğundan lütfen " +"dikkatli ilerleyin." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9225,8 +10888,12 @@ msgstr "" "Temizleme Kulesi şu anda yalnızca ilgili ekstruder adreslemesiyle " "desteklenmektedir (use_relative_e_distances=1)." -msgid "Ooze prevention is currently not supported with the prime tower enabled." -msgstr "Sızıntı önleme şu anda ana kule etkinken desteklenmemektedir." +msgid "" +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." +msgstr "" +"Sızıntı önleme yalnızca ‘tek ekstruder çoklu malzeme’ kapalıyken silme " +"kulesiyle desteklenir." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9242,23 +10909,32 @@ msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"Uyarlanabilir katman yüksekliği açıkken ana kule desteklenmez. Tüm nesnelerin " -"aynı katman yüksekliğine sahip olmasını gerektirir." - -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "" -"Ana kule \"destek boşluğunun\" katman yüksekliğinin katı olmasını gerektirir" - -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "" -"Prime tower, tüm nesnelerin aynı katman yüksekliğine sahip olmasını gerektirir" +"Uyarlanabilir katman yüksekliği açıkken ana kule desteklenmez. Tüm " +"nesnelerin aynı katman yüksekliğine sahip olmasını gerektirir." msgid "" -"The prime tower requires that all objects are printed over the same number of " -"raft layers" +"The prime tower requires \"support gap\" to be multiple of layer height." +msgstr "" +"Ana kule \"destek boşluğunun\" katman yüksekliğinin katı olmasını gerektirir." + +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "" +"Prime tower, tüm nesnelerin aynı katman yüksekliğine sahip olmasını " +"gerektirir." + +msgid "" +"The prime tower requires that all objects are printed over the same number " +"of raft layers." msgstr "" "Ana kule, tüm nesnelerin aynı sayıda sal katmanı üzerine yazdırılmasını " -"gerektirir" +"gerektirir." + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Prime kulesi yalnızca aynı destek üst z mesafesi ile yazdırılırlarsa birden " +"fazla nesne için desteklenir." msgid "" "The prime tower requires that all objects are sliced with the same layer " @@ -9268,11 +10944,16 @@ msgstr "" "gerektirir." msgid "" -"The prime tower is only supported if all objects have the same variable layer " -"height" +"The prime tower is only supported if all objects have the same variable " +"layer height." msgstr "" "Prime tower yalnızca tüm nesnelerin aynı değişken katman yüksekliğine sahip " -"olması durumunda desteklenir" +"olması durumunda desteklenir." + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" +"Bir veya daha fazla nesneye yazıcının sahip olmadığı bir ekstruder atandı." msgid "Too small line width" msgstr "Çizgi genişliği çok küçük" @@ -9280,10 +10961,21 @@ msgstr "Çizgi genişliği çok küçük" msgid "Too large line width" msgstr "Çok büyük çizgi genişliği" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"Farklı nozul çaplarına sahip birden fazla ekstruderle baskı. Destek mevcut " +"filamentle (support_filament == 0 veya support_interface_filament == 0) " +"basılacaksa, tüm nozulların aynı çapta olması gerekir." + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"Prime kulesi için, destek, nesne ile aynı katman yüksekliğine sahip olmalıdır." +"Prime kulesi için, destek, nesne ile aynı katman yüksekliğine sahip " +"olmalıdır." msgid "" "Organic support tree tip diameter must not be smaller than support material " @@ -9296,8 +10988,8 @@ msgid "" "Organic support branch diameter must not be smaller than 2x support material " "extrusion width." msgstr "" -"Organik destek dalı çapı, destek malzemesi ekstrüzyon genişliğinin 2 katından " -"daha küçük olamaz." +"Organik destek dalı çapı, destek malzemesi ekstrüzyon genişliğinin 2 " +"katından daha küçük olamaz." msgid "" "Organic support branch diameter must not be smaller than support tree tip " @@ -9310,24 +11002,24 @@ msgstr "" "Destek uygulayıcıları kullanılıyor ancak destek etkinleştirilmiyor. Lütfen " "desteği etkinleştirin." -msgid "Layer height cannot exceed nozzle diameter" -msgstr "Katman yüksekliği nozul çapını aşamaz" +msgid "Layer height cannot exceed nozzle diameter." +msgstr "Katman yüksekliği nozul çapını aşamaz." msgid "" -"Relative extruder addressing requires resetting the extruder position at each " -"layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " +"Relative extruder addressing requires resetting the extruder position at " +"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" -"Göreceli ekstruder adreslemesi, kayan nokta doğruluğunun kaybını önlemek için " -"her katmandaki ekstruder konumunun sıfırlanmasını gerektirir. Layer_gcode'a " -"\"G92 E0\" ekleyin." +"Göreceli ekstruder adreslemesi, kayan nokta doğruluğunun kaybını önlemek " +"için her katmandaki ekstruder konumunun sıfırlanmasını gerektirir. " +"Layer_gcode'a \"G92 E0\" ekleyin." msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -"Before_layer_gcode'da \"G92 E0\" bulundu ve bu, mutlak ekstruder adreslemeyle " -"uyumsuzdu." +"Before_layer_gcode'da \"G92 E0\" bulundu ve bu, mutlak ekstruder " +"adreslemeyle uyumsuzdu." msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " @@ -9361,13 +11053,28 @@ msgstr "" "Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasında maksimum " "sarsıntı ayarını yapabilirsiniz." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"Bağlantı noktası sapması ayarı, yazıcının maksimum değerini " +"(machine_max_junction_deviation) aşıyor.\n" +"Orca, yazıcının kapasitesini aşmaması için bağlantı noktası sapmasını " +"otomatik olarak sınırlayacaktır.\n" +"Daha yüksek sınırlar elde etmek için yazıcınızın yapılandırmasında " +"machine_max_junction_deviation değerini ayarlayabilirsiniz." + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" "Orca will automatically cap the acceleration speed to ensure it doesn't " "surpass the printer's capabilities.\n" -"You can adjust the machine_max_acceleration_extruding value in your printer's " -"configuration to get higher speeds." +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." msgstr "" "Hızlanma ayarı yazıcının maksimum hızlanmasını aşıyor " "(machine_max_acceleration_extruding).\n" @@ -9391,6 +11098,20 @@ msgstr "" "Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasındaki " "machine_max_acceleration_travel değerini ayarlayabilirsiniz." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"Dış–iç veya iç–dış–iç duvar sıralamaları için 'Hassas duvar' seçeneği yok " +"sayılacaktır." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Filament büzülmesi kullanılmayacaktır çünkü kullanılan filamentlerin " +"filament büzülmesi önemli ölçüde farklılık göstermektedir." + msgid "Generating skirt & brim" msgstr "Etek ve kenar oluşturma" @@ -9403,11 +11124,17 @@ msgstr "G kodu oluşturuluyor" msgid "Failed processing of the filename_format template." msgstr "Dosyaadı_format şablonunun işlenmesi başarısız oldu." +msgid "Printer technology" +msgstr "Yazıcı teknolojisi" + msgid "Printable area" msgstr "Yazdırılabilir alan" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" -msgstr "Yatak hariç alan" +msgstr "Tablada hariç tutulan bölge" msgid "" "Unprintable area in XY plane. For example, X1 Series printers use the front " @@ -9428,12 +11155,13 @@ msgid "Elephant foot compensation" msgstr "Fil ayağı telafi oranı" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "" -"Fil ayağı etkisini telafi etmek için baskı plakasındaki ilk katmanı küçültün" +"Fil ayağı etkisini telafi etmek için baskı plakasındaki ilk katmanı küçültün." msgid "Elephant foot compensation layers" -msgstr "Fil ayağı etkisini telafi katmanları" +msgstr "Fil ayağı telafisi" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9450,24 +11178,33 @@ msgstr "katman" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Her katman için dilimleme yüksekliği. Daha küçük katman yüksekliği, daha " -"doğru ve daha fazla baskı süresi anlamına gelir" +"doğru ve daha fazla baskı süresi anlamına gelir." msgid "Printable height" msgstr "Yazdırılabilir yükseklik" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "" +"Yazıcının mekanizması tarafından sınırlanan maksimum yazdırılabilir " +"yükseklik." + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." msgstr "" -"Yazıcının mekanizması tarafından sınırlanan maksimum yazdırılabilir yükseklik" msgid "Preferred orientation" msgstr "Tercih edilen yönlendirme" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "" -"İlk içe aktarma sonrasında stl'leri Z ekseninde otomatik olarak yönlendirin" +"İlk içe aktarma sonrasında STL'leri Z ekseninde otomatik olarak yönlendirin." msgid "Printer preset names" msgstr "Yazıcı ön ayar adları" @@ -9475,10 +11212,10 @@ msgstr "Yazıcı ön ayar adları" msgid "Use 3rd-party print host" msgstr "3. taraf yazdırma ana bilgisayarını kullanın" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "" "BambuLab yazıcısının 3. taraf yazdırma ana bilgisayarları aracılığıyla " -"kontrol edilmesine izin ver" +"kontrol edilmesine izin ver." msgid "Hostname, IP or URL" msgstr "Ana bilgisayar adı, IP veya URL" @@ -9487,23 +11224,24 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the hostname, IP address or URL of the printer host instance. Print " "host behind HAProxy with basic auth enabled can be accessed by putting the " -"user name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"user name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" -"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " -"alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " -"URL'sini içermelidir. Temel kimlik doğrulamanın etkin olduğu HAProxy'nin " -"arkasındaki yazdırma ana bilgisayarına, kullanıcı adı ve parolanın aşağıdaki " -"biçimdeki URL'ye girilmesiyle erişilebilir: https://username:password@your-" -"octopi-address/" +"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. " +"Bu alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini " +"veya URL'sini içermelidir. Temel kimlik doğrulamanın etkin olduğu " +"HAProxy'nin arkasındaki yazdırma ana bilgisayarına, kullanıcı adı ve " +"parolanın aşağıdaki biçimdeki URL'ye girilmesiyle erişilebilir: https://" +"username:password@your-octopi-address/" msgid "Device UI" msgstr "Cihaz kullanıcı arayüzü" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" -"Print_Host ile aynı değilse cihazınızın kullanıcı arayüzünün URL'sini belirtin" +"Print_Host ile aynı değilse cihazınızın kullanıcı arayüzünün URL'sini " +"belirtin." msgid "API Key / Password" msgstr "API Anahtarı / Şifre" @@ -9512,19 +11250,20 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." msgstr "" -"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " -"alan, kimlik doğrulama için gereken API Anahtarını veya şifreyi içermelidir." +"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. " +"Bu alan, kimlik doğrulama için gereken API Anahtarını veya şifreyi " +"içermelidir." -msgid "Name of the printer" -msgstr "Yazıcı adı" +msgid "Name of the printer." +msgstr "Yazıcı adı." msgid "HTTPS CA File" msgstr "HTTPS CA Dosyası" msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " -"in crt/pem format. If left blank, the default OS CA certificate repository is " -"used." +"in crt/pem format. If left blank, the default OS CA certificate repository " +"is used." msgstr "" "HTTPS OctoPrint bağlantıları için crt/pem formatında özel CA sertifika " "dosyası belirtilebilir. Boş bırakılırsa varsayılan OS CA sertifika deposu " @@ -9548,8 +11287,8 @@ msgstr "" "iptal kontrollerini göz ardı edin. Bağlantı başarısız olursa, kendinden " "imzalı sertifikalar için bu seçeneğin etkinleştirilmesi istenebilir." -msgid "Names of presets related to the physical printer" -msgstr "Fiziksel yazıcıyla ilgili ön ayarların adları" +msgid "Names of presets related to the physical printer." +msgstr "Fiziksel yazıcıyla ilgili ön ayarların adları." msgid "Authorization Type" msgstr "Yetki Türü" @@ -9560,25 +11299,26 @@ msgstr "API anahtarı" msgid "HTTP digest" msgstr "HTTP özeti" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Duvar geçişinden kaçın" -msgid "Detour and avoid to travel across wall which may cause blob on surface" -msgstr "Yüzeyde lekelenmeye neden olabilecek duvar boyunca ilerlemekten kaçın" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." +msgstr "Yüzeyde lekelenmeye neden olabilecek duvar boyunca ilerlemekten kaçın." -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Duvarı geçmekten kaçının - maksimum servis yolu uzunluğu" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"Duvarı geçmekten kaçınmak için maksimum sapma mesafesi. Yoldan sapma mesafesi " -"bu değerden büyükse yoldan sapmayın. Yol uzunluğu, mutlak bir değer olarak " -"veya doğrudan seyahat yolunun yüzdesi (örneğin %50) olarak belirtilebilir. " -"Devre dışı bırakmak için sıfır" +"Duvarı geçmekten kaçınmak için maksimum sapma mesafesi. Yoldan sapma " +"mesafesi bu değerden büyükse yoldan sapmayın. Yol uzunluğu, mutlak bir değer " +"olarak veya doğrudan seyahat yolunun yüzdesi (örneğin %50) olarak " +"belirtilebilir. Devre dışı bırakmak için sıfır." msgid "mm or %" msgstr "mm veya %" @@ -9587,35 +11327,46 @@ msgid "Other layers" msgstr "Diğer katmanlar" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"İlk katman hariç tüm katmanlar için yatak sıcaklığı. 0 değeri, filamentin " +"Cool Plate SuperTack üzerine baskıyı desteklemediği anlamına gelir." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 değeri, filamentin " -"Cool Plate üzerine yazdırmayı desteklemediği anlamına gelir" - -msgid "°C" -msgstr "°C" +"Cool Plate üzerine yazdırmayı desteklemediği anlamına gelir." msgid "" -"Bed temperature for layers except the initial one. Value 0 means the filament " -"does not support to print on the Engineering Plate" -msgstr "" -"İlk katman dışındaki katmanlar için yatak sıcaklığı. Değer 0, filamentin " -"Mühendislik Plakasına yazdırmayı desteklemediği anlamına gelir" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the filament " -"does not support to print on the High Temp Plate" -msgstr "" -"İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 değeri, filamentin " -"Yüksek Sıcaklık Plakasına yazdırmayı desteklemediği anlamına gelir" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the filament " -"does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" "İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 Değeri, filamentin " -"Dokulu PEI Plaka üzerine yazdırmayı desteklemediği anlamına gelir" +"Dokulu Soğuk Plaka üzerine yazdırmayı desteklemediği anlamına gelir." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." +msgstr "" +"İlk katman dışındaki katmanlar için yatak sıcaklığı. Değer 0, filamentin " +"Mühendislik Plakasına yazdırmayı desteklemediği anlamına gelir." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 değeri, filamentin " +"Yüksek Sıcaklık Plakasına yazdırmayı desteklemediği anlamına gelir." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 Değeri, filamentin " +"Dokulu PEI Plaka üzerine yazdırmayı desteklemediği anlamına gelir." msgid "Initial layer" msgstr "Başlangıç katmanı" @@ -9624,54 +11375,64 @@ msgid "Initial layer bed temperature" msgstr "İlk katman yatak sıcaklığı" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Cool Plate üzerine " -"yazdırmayı desteklemediği anlamına gelir" +"İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Soğuk Plaka SuperTack " +"üzerine yazdırmayı desteklemediği anlamına gelir." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." +msgstr "" +"İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Cool Plate üzerine " +"yazdırmayı desteklemediği anlamına gelir." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" "İlk katmanın yatak sıcaklığı. 0 Değeri, filamentin Dokulu Soğuk Plaka " "üzerine yazdırmayı desteklemediği anlamına gelir." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" "İlk katmanın yatak sıcaklığı. Değer 0, filamentin Mühendislik Plakasına " -"yazdırmayı desteklemediği anlamına gelir" +"yazdırmayı desteklemediği anlamına gelir." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" "İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Yüksek Sıcaklık Plakasına " -"yazdırmayı desteklemediği anlamına gelir" +"yazdırmayı desteklemediği anlamına gelir." msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "" "İlk katmanın yatak sıcaklığı. 0 Değeri, filamentin Dokulu PEI Plaka üzerine " -"yazdırmayı desteklemediği anlamına gelir" +"yazdırmayı desteklemediği anlamına gelir." -msgid "Bed types supported by the printer" -msgstr "Yazıcının desteklediği yatak türleri" +msgid "Bed types supported by the printer." +msgstr "Yazıcının desteklediği yatak türleri." msgid "Smooth Cool Plate" -msgstr "Pürüzsüz Soğuk Plaka" - -msgid "Engineering Plate" -msgstr "Mühendislik Plakası" +msgstr "Smooth Cool Plate" msgid "Smooth High Temp Plate" -msgstr "Pürüzsüz Yüksek Sıcaklık Plaka" +msgstr "Smooth High Temp Plate" -msgid "Textured Cool Plate" -msgstr "Dokulu Soğuk Plaka" +msgid "Default bed type" +msgstr "Varsayılan yatak türü" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "" +"Yazıcı için varsayılan plaka türü (hem sayısal hem de dize biçimini " +"destekler)." msgid "First layer print sequence" msgstr "İlk katman yazdırma sırası" @@ -9685,8 +11446,8 @@ msgstr "Diğer katmanların sayısı yazdırma sırası" msgid "Other layers filament sequence" msgstr "Diğer katmanlar filament dizisi" -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "Bu G kodu, z'yi kaldırmadan önce her katman değişikliğinde eklenir" +msgid "This G-code is inserted at every layer change before the Z lift." +msgstr "Bu G kodu, z'yi kaldırmadan önce her katman değişikliğinde eklenir." msgid "Bottom shell layers" msgstr "Alt katmanlar" @@ -9694,11 +11455,11 @@ msgstr "Alt katmanlar" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "Bu, alt yüzey katmanı da dahil olmak üzere alt kabuğun katı katmanlarının " "sayısıdır. Bu değerle hesaplanan kalınlık alt kabuk kalınlığından ince " -"olduğunda alt kabuk katmanları artırılacaktır" +"olduğunda alt kabuk katmanları artırılacaktır." msgid "Bottom shell thickness" msgstr "Alt katman kalınlığı" @@ -9707,36 +11468,72 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by bottom " -"shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" -"Alt kabuk katmanları tarafından hesaplanan kalınlık bu değerden daha ince ise " -"dilimleme sırasında alt katı katmanların sayısı arttırılır. Bu, katman " +"Alt kabuk katmanları tarafından hesaplanan kalınlık bu değerden daha ince " +"ise dilimleme sırasında alt katı katmanların sayısı arttırılır. Bu, katman " "yüksekliği küçük olduğunda kabuğun çok ince olmasını önleyebilir. 0, bu " "ayarın devre dışı olduğu ve alt kabuğun kalınlığının mutlaka alt kabuk " -"katmanları tarafından belirlendiği anlamına gelir" +"katmanları tarafından belirlendiği anlamına gelir." msgid "Apply gap fill" msgstr "Boşluk doldurmayı uygula" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" -"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only\n" -"3. Nowhere: Disables gap fill\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" +"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Seçilen yüzeyler için boşluk doldurmayı etkinleştirir. Doldurulacak minimum " -"boşluk uzunluğu aşağıdaki küçük boşlukları filtrele seçeneğinden kontrol " -"edilebilir.\n" +"Seçilen katı yüzeyler için boşluk doldurmayı etkinleştirir. Doldurulacak " +"minimum boşluk uzunluğu aşağıdaki küçük boşlukları filtrele seçeneğinden " +"kontrol edilebilir.\n" "\n" "Seçenekler:\n" -"1. Her Yerde: Üst, alt ve iç katı yüzeylere boşluk doldurma uygular\n" -"2. Üst ve Alt yüzeyler: Boşluk doldurmayı yalnızca üst ve alt yüzeylere " -"uygular\n" -"3. Hiçbir Yerde: Boşluk doldurmayı devre dışı bırakır\n" +"1. Her Yerde: Maksimum dayanıklılık için üst, alt ve iç katı yüzeylere " +"boşluk dolgusu uygular\n" +"2. Üst ve Alt yüzeyler: Boşluk dolgusunu yalnızca üst ve alt yüzeylere " +"uygulayarak baskı hızını dengeler, katı dolgudaki aşırı ekstrüzyon " +"potansiyelini azaltır ve üst ve alt yüzeylerde iğne deliği boşluğu " +"kalmamasını sağlar\n" +"3. Hiçbir Yer: Tüm katı dolgu alanları için boşluk doldurmayı devre dışı " +"bırakır.\n" +"\n" +"Klasik çevre oluşturucu kullanılıyorsa, aralarına tam genişlikte bir çizgi " +"sığmazsa, çevreler arasında boşluk doldurmanın da oluşturulabileceğini " +"unutmayın. Bu çevre boşluğu dolgusu bu ayarla kontrol edilmez.\n" +"\n" +"Oluşturulan klasik çevre de dahil olmak üzere tüm boşluk doldurmanın " +"kaldırılmasını istiyorsanız, filtreyi küçük boşluklar dışında değerini " +"999999 gibi büyük bir sayıya ayarlayın.\n" +"\n" +"Ancak çevreler arasındaki boşluğun doldurulması modelin gücüne katkıda " +"bulunduğundan bu önerilmez. Çevreler arasında aşırı boşluk dolgusunun " +"oluşturulduğu modeller için, arakne duvar oluşturucuya geçmek ve bu seçeneği " +"kozmetik üst ve alt yüzey boşluk dolgusunun oluşturulup oluşturulmayacağını " +"kontrol etmek için kullanmak daha iyi bir seçenek olacaktır." msgid "Everywhere" msgstr "Her yerde" @@ -9747,72 +11544,150 @@ msgstr "Üst ve alt yüzeyler" msgid "Nowhere" msgstr "Hiçbir yerde" -msgid "Force cooling for overhang and bridge" -msgstr "Çıkıntı ve köprüler için soğutmayı zorla" +msgid "Force cooling for overhangs and bridges" +msgstr "Çıkıntılar ve köprüler için soğutma gücü" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and bridge " -"to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Daha iyi soğutma elde etmek amacıyla çıkıntı ve köprü için parça soğutma fanı " -"hızını optimize etmek amacıyla bu seçeneği etkinleştirin" +"Özellikle çıkıntılar, iç ve dış köprüler için parça soğutma fanı hızının " +"ayarlanmasına izin vermek için bu seçeneği etkinleştirin. Fan hızını bu " +"özellikler için özel ayarlamak, genel baskı kalitesini artırabilir ve " +"eğrilmeyi azaltabilir." -msgid "Fan speed for overhang" -msgstr "Çıkıntılar için fan hızı" +msgid "Overhangs and external bridges fan speed" +msgstr "Çıkıntılar ve dış köprüler fan hızı" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang wall " -"which has large overhang degree. Forcing cooling for overhang and bridge can " -"get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Çıkıntı derecesi büyük olan köprü veya çıkıntılı duvara baskı yaparken parça " -"soğutma fanını bu hızda olmaya zorlayın. Çıkıntı ve köprü için soğutmayı " -"zorlamak, bu parça için daha iyi kalite elde edilmesini sağlayabilir" +"Yukarıdaki ‘Çıkıntılar soğutma eşiği’ parametresinde ayarlanan değeri aşan " +"bir çıkıntı eşiğine sahip köprüleri veya çıkıntı duvarlarını yazdırırken bu " +"parça soğutma fanı hızını kullanın. Özellikle çıkıntılar ve köprüler için " +"soğutmanın artırılması, bu özelliklerin genel baskı kalitesini artırabilir.\n" +"\n" +"Lütfen bu fan hızının yukarıda ayarlanan minimum fan hızı eşiği tarafından " +"alt uçta sıkıştırıldığını unutmayın. Ayrıca minimum katman süresi eşiği " +"karşılanmadığında maksimum fan hızı eşiğine kadar yukarı doğru ayarlanır." -msgid "Cooling overhang threshold" -msgstr "Çıkıntı soğutması" +msgid "Overhang cooling activation threshold" +msgstr "Çıkıntı soğutma etkinleştirme eşiği" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width of " -"the line without support from lower layer. 0% means forcing cooling for all " -"outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Yazdırılan parçanın çıkıntı derecesi bu değeri aştığında soğutma fanını " -"belirli bir hıza zorlar. Alt katmandan destek almadan çizginin ne kadar " -"genişlediğini gösteren yüzde olarak ifade edilir. 0, çıkıntı derecesi ne " -"kadar olursa olsun tüm dış duvar için soğutmayı zorlamak anlamına gelir" +"Çıkıntı bu belirtilen eşiği aştığında, soğutma fanını aşağıda ayarlanan " +"Çıkıntı Fan Hızında çalışmaya zorlayın. Bu eşik yüzde olarak ifade edilir ve " +"her bir çizginin genişliğinin altındaki katman tarafından desteklenmeyen " +"kısmını gösterir. Bu değerin %0 olarak ayarlanması, soğutma fanını çıkıntı " +"derecesine bakılmaksızın tüm dış duvarlar için çalışmaya zorlar." -msgid "Bridge infill direction" -msgstr "Köprü dolgu açısı" +msgid "External bridge infill direction" +msgstr "Dış köprü dolgu yönü" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Köprüleme açısı geçersiz kılma. Sıfıra bırakılırsa köprüleme açısı otomatik " "olarak hesaplanacaktır. Aksi halde dış köprüler için sağlanan açı " "kullanılacaktır. Sıfır açı için 180°'yi kullanın." -msgid "Bridge density" -msgstr "Köprü dolgu yoğunluğu" +msgid "Internal bridge infill direction" +msgstr "İç köprü dolgu yönü" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Dış köprülerin yoğunluğu. %100 sağlam köprü anlamına gelir. Varsayılan " -"%100'dür." +"İç köprüleme açısı geçersiz kılma. Sıfır olarak bırakılırsa, köprüleme açısı " +"otomatik olarak hesaplanacaktır. Aksi takdirde sağlanan açı iç köprüler için " +"kullanılacaktır. Sıfır açı için 180° kullanın.\n" +"\n" +"Belirli bir model ihtiyacı olmadığı sürece 0’da bırakılması önerilir." + +msgid "External bridge density" +msgstr "Dış köprü yoğunluğu" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Dış köprü çizgilerinin yoğunluğunu (aralığını) kontrol eder. 100 katı köprü " +"anlamına gelir. Varsayılan değer %100’dür.\n" +"\n" +"Daha düşük yoğunluklu dış köprüler güvenilirliği artırmaya yardımcı " +"olabilir, çünkü havanın ekstrüde köprünün etrafında dolaşması için daha " +"fazla alan vardır ve soğutma hızını artırır." + +msgid "Internal bridge density" +msgstr "İç köprü yoğunluğu" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"İç köprü çizgilerinin yoğunluğunu (aralığını) kontrol eder. 100 katı köprü " +"anlamına gelir. Varsayılan değer %100’dür.\n" +"\n" +" Daha düşük yoğunluklu iç köprüler, üst yüzeydeki yastıklanmayı azaltmaya " +"yardımcı olabilir ve ekstrüde köprünün etrafında havanın dolaşması için daha " +"fazla alan olduğundan iç köprü güvenilirliğini artırarak soğutma hızını " +"artırır.\n" +"\n" +"Bu seçenek, dolgu üzerine ikinci iç köprü seçeneği ile birleştirildiğinde " +"özellikle iyi çalışır ve katı dolgu ekstrüde edilmeden önce iç köprüleme " +"yapısını daha da iyileştirir." msgid "Bridge flow ratio" msgstr "Köprülerde akış oranı" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Köprü için malzeme miktarını azaltmak ve sarkmayı iyileştirmek için bu değeri " -"biraz azaltın (örneğin 0,9)" +"Köprü için malzeme miktarını azaltmak ve sarkmayı iyileştirmek amacıyla bu " +"değeri biraz azaltın (örneğin 0,9).\n" +"\n" +"Kullanılan gerçek köprü akışı, bu değerin filament akış oranıyla ve " +"ayarlandıysa nesnenin akış oranıyla çarpılmasıyla hesaplanır." msgid "Internal bridge flow ratio" msgstr "İç köprü akış oranı" @@ -9820,51 +11695,167 @@ msgstr "İç köprü akış oranı" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" "Bu değer iç köprü katmanının kalınlığını belirler. Bu, seyrek dolgunun " "üzerindeki ilk katmandır. Seyrek dolguya göre yüzey kalitesini iyileştirmek " -"için bu değeri biraz azaltın (örneğin 0,9)." +"için bu değeri biraz azaltın (örneğin 0,9).\n" +"\n" +"Kullanılan gerçek iç köprü akışı, bu değerin köprü akış oranı, filament akış " +"oranı ve ayarlandıysa nesnenin akış oranıyla çarpılmasıyla hesaplanır." msgid "Top surface flow ratio" msgstr "Üst katı dolgu akış oranı" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Bu faktör üst katı dolgu için malzeme miktarını etkiler. Pürüzsüz bir yüzey " -"elde etmek için biraz azaltabilirsiniz" +"elde etmek için bunu biraz azaltabilirsiniz.\n" +"\n" +"Kullanılan gerçek üst yüzey akışı, bu değerin filament akış oranıyla ve " +"ayarlandıysa nesnenin akış oranıyla çarpılmasıyla hesaplanır." msgid "Bottom surface flow ratio" msgstr "Alt katı dolgu akış oranı" -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "Bu faktör alt katı dolgu için malzeme miktarını etkiler" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Bu faktör alt katı dolgu için malzeme miktarını etkiler.\n" +"\n" +"Kullanılan gerçek alt katı dolgu akışı, bu değerin filament akış oranıyla ve " +"ayarlandıysa nesnenin akış oranıyla çarpılmasıyla hesaplanır." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Precise wall" msgstr "Hassas duvar" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Dış duvar aralığını ayarlayarak kabuk hassasiyetini artırın. Bu aynı zamanda " -"katman tutarlılığını da artırır.\n" -"Not: Bu ayar yalnızca duvar sırası İç-Dış olarak yapılandırıldığında etkili " -"olacaktır." +"Dış duvar aralıklarını ayarlayarak kabuk hassasiyetini artırır. Bu, katman " +"tutarlılığını da iyileştirir. NOT: Bu seçenek dış–iç veya iç–dış–iç duvar " +"sıralamalarında yok sayılacaktır." msgid "Only one wall on top surfaces" -msgstr "Üst yüzeylerde yalnızca bir duvar" +msgstr "Üst yüzeylerde yalnızca bir dış duvar" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Üst dolgu desenine daha fazla yer açmak için düz üst yüzeyde yalnızca bir " -"duvar kullanın" +"duvar kullanın." msgid "One wall threshold" msgstr "Tek duvar eşiği" @@ -9880,11 +11871,11 @@ msgid "" "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" -"Eğer bir üst yüzey basılacaksa ve kısmen başka bir katman tarafından kaplıysa " -"layer genişliği bu değerin altında olan bir üst katman olarak " +"Eğer bir üst yüzey basılacaksa ve kısmen başka bir katman tarafından " +"kaplıysa layer genişliği bu değerin altında olan bir üst katman olarak " "değerlendirilmeyecek. Yalnızca çevrelerle kaplanması gereken yüzeyde 'bir " -"çevre üstte' tetiklemesine izin vermemek yararlı olabilir. Bu değer mm veya a " -"% çevre ekstrüzyon genişliğinin bir yüzdesi olabilir.\n" +"çevre üstte' tetiklemesine izin vermemek yararlı olabilir. Bu değer mm veya " +"a % çevre ekstrüzyon genişliğinin bir yüzdesi olabilir.\n" "Uyarı: Etkinleştirilirse bir sonraki katmanda harfler gibi bazı ince " "özelliklerin olması durumunda yapay yapılar oluşturulabilir. Bu yapıları " "kaldırmak için bu ayarı 0 olarak ayarlayın." @@ -9894,38 +11885,38 @@ msgstr "İlk katmanda yalnızca bir duvar" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Alt dolgu desenine daha fazla yer açmak için ilk katmanda yalnızca bir duvar " -"kullanın" +"kullanın." msgid "Extra perimeters on overhangs" msgstr "Çıkıntılarda ekstra çevre (perimeter)" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" "Dik çıkıntılar ve köprülerin sabitlenemediği alanlar üzerinde ek çevre " -"yolları (perimeter) oluşturun. " +"yolları (perimeter) oluşturun." -msgid "Reverse on odd" -msgstr "Tersine çevir" +msgid "Reverse on even" +msgstr "Çift katmanlarda ters yön" msgid "Overhang reversal" msgstr "Çıkıntıyı tersine çevir" msgid "" -"Extrude perimeters that have a part over an overhang in the reverse direction " -"on odd layers. This alternating pattern can drastically improve steep " -"overhangs.\n" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on even layers. This alternating pattern can drastically improve " +"steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Tek katmanlarda ters yönde bir çıkıntının üzerinde bir kısmı bulunan " -"çevreleri ekstrüzyonla çıkarın. Bu alternatif desen, dik çıkıntıları büyük " -"ölçüde iyileştirebilir.\n" +"Eşit katmanlarda ters yönde bir çıkıntının üzerinde bir kısmı bulunan " +"çevreleri ekstrüde edin. Bu alternatif desen, dik çıkıntıları büyük ölçüde " +"iyileştirebilir.\n" "\n" "Bu ayar aynı zamanda parça duvarlarındaki gerilimin azalması nedeniyle " "parçanın bükülmesinin azaltılmasına da yardımcı olabilir." @@ -9934,19 +11925,20 @@ msgid "Reverse only internal perimeters" msgstr "Yalnızca iç çevreleri ters çevir" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " "maintaining external wall quality. This feature can be very useful for warp " "prone material, like ABS/ASA, and also for elastic filaments, like TPU and " -"Silk PLA. It can also help reduce warping on floating regions over supports.\n" +"Silk PLA. It can also help reduce warping on floating regions over " +"supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Ters çevre mantığını yalnızca iç çevrelere uygulayın. \n" +"Ters çevre mantığını yalnızca iç çevrelere uygulayın.\n" "\n" "Bu ayar, parçalar artık farklı yönlerde dağıtıldığından parça gerilimlerini " "büyük ölçüde azaltır. Bu, dış duvar kalitesini korurken parçanın bükülmesini " @@ -9955,9 +11947,9 @@ msgstr "" "Ayrıca destekler üzerindeki yüzen bölgelerdeki bükülmenin azaltılmasına da " "yardımcı olabilir.\n" "\n" -"Bu ayarın en etkili olması için, tüm iç duvarların çıkıntı derecelerine " -"bakılmaksızın tek katmanlar üzerine değişen yönlerde yazdırılması için Ters " -"Eşiği 0'a ayarlamanız önerilir." +"Bu ayarın en etkili olması için, Ters Eşiğin 0’a ayarlanması önerilir; " +"böylece tüm iç duvarlar, çıkıntı derecelerine bakılmaksızın eşit katmanlara " +"alternatif yönlerde yazdırılır." msgid "Bridge counterbore holes" msgstr "Köprü havşa delikleri" @@ -9965,15 +11957,15 @@ msgstr "Köprü havşa delikleri" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Bu seçenek, havşa delikleri için köprüler oluşturarak bunların desteksiz " "yazdırılmasına olanak tanır. Mevcut modlar şunları içerir:\n" -"1. Yok: Köprü oluşturulmaz.\n" -"2. Kısmen Köprülendi: Desteklenmeyen alanın yalnızca bir kısmı köprülenecek.\n" -"3. Feda Katman: Tam bir feda köprü katmanı oluşturulur." +"1. Yok: Köprü oluşturulmaz\n" +"2. Kısmen Köprülendi: Desteklenmeyen alanın yalnızca bir kısmı köprülenecek\n" +"3. Feda Katman: Tam bir feda köprü katmanı oluşturulur" msgid "Partially bridged" msgstr "Kısmen köprülü" @@ -9991,70 +11983,105 @@ msgstr "Çıkıntıyı tersine çevirme eşiği" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" "Ters çevirmenin faydalı sayılması için çıkıntının mm sayısı olması gerekir. " -"Çevre genişliğinin %'si olabilir.\n" -"Değer 0 her tek katmanda terslemeyi etkinleştirir." - -msgid "Classic mode" -msgstr "Klasik mod" - -msgid "Enable this option to use classic mode" -msgstr "Klasik modu kullanmak için bu seçeneği etkinleştirin" +"Çevre genişliğinin %’si olabilir.\n" +"0 değeri ne olursa olsun her çift katmanda ters çevirmeyi mümkün kılar.\n" +"Çıkıntı duvarını algıla etkinleştirilmediğinde, bu seçenek göz ardı edilir " +"ve geri dönüş, her çift katmanda gerçekleşir." msgid "Slow down for overhang" msgstr "Çıkıntılarda yavaşla" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" "Farklı sarkma derecelerinde yazdırmayı yavaşlatmak için bu seçeneği " -"etkinleştirin" +"etkinleştirin." msgid "Slow down for curled perimeters" -msgstr "Kıvrılmış çevre çizgilerinde yavaşlat" +msgstr "Kıvrılmış dış duvarlarda hızı düşür" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Potansiyel kıvrılmış çevrelerin bulunabileceği alanlarda yazdırmayı " -"yavaşlatmak için bu seçeneği etkinleştirin" +"Çevrelerin yukarıya doğru kıvrılmış olabileceği alanlarda yazdırmayı " +"yavaşlatmak için bu seçeneği etkinleştirin. Örneğin, Benchy gövdesinin önü " +"gibi keskin köşelerdeki çıkıntılara yazdırırken birden fazla katman üzerinde " +"oluşan kıvrılmayı azaltacak şekilde ek yavaşlama uygulanacaktır.\n" +"\n" +" Yazıcınızın soğutması yeterince güçlü olmadığı veya yazdırma hızı çevre " +"kıvrılmasını önleyecek kadar yavaş olmadığı sürece, genellikle bu seçeneğin " +"açık olması önerilir. Yüksek harici çevre hızıyla yazdırılıyorsa, bu " +"parametre, yazdırma hızlarındaki büyük farklılıklar nedeniyle yavaşlama " +"sırasında hafif bozulmalara neden olabilir. Artefaktlar fark ederseniz " +"basınç ilerlemenizin doğru şekilde ayarlandığından emin olun.\n" +"\n" +"Not: Bu seçenek etkinleştirildiğinde, çıkıntı çevreleri çıkıntılar gibi ele " +"alınır; bu, çıkıntının çevresi bir köprünün parçası olsa bile çıkıntı " +"hızının uygulandığı anlamına gelir. Örneğin, çevreler 100% çıkıntılı " +"olduğunda ve onları alttan destekleyen bir duvar olmadığında 100% çıkıntı " +"hızı uygulanacaktır." msgid "mm/s or %" msgstr "mm/s veya %" -msgid "External" -msgstr "Harici" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Köprü hızı ve tamamen sarkan duvar" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Dışarıdan görülebilen köprü ekstrüzyonlarının hızı.\n" +"\n" +"Ayrıca, kıvrılmış çevreler için yavaşlama devre dışı bırakılırsa veya Klasik " +"çıkıntı modu etkinleştirilirse, ister bir köprünün ister bir çıkıntının " +"parçası olsun, %13’ten daha az desteklenen çıkıntılı duvarların yazdırma " +"hızı olacaktır." msgid "Internal" msgstr "Dahili" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Dahili köprünün hızı. Değer yüzde olarak ifade edilirse köprü_hızına göre " -"hesaplanacaktır. Varsayılan değer %150'dir." +"İç köprülerin hızı. Değer yüzde olarak ifade edilirse köprü hızına göre " +"hesaplanacaktır. Varsayılan değer %150’dir." msgid "Brim width" msgstr "Kenar genişliği" -msgid "Distance from model to the outermost brim line" -msgstr "Modelden en dış kenar çizgisine kadar olan mesafe" +msgid "Distance from model to the outermost brim line." +msgstr "Modelden en dış kenar çizgisine kadar olan mesafe." msgid "Brim type" msgstr "Kenar tipi" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "Bu, modellerin dış ve/veya iç kısmındaki Kenar oluşumunu kontrol eder. " "Otomatik, kenar genişliğinin otomatik olarak analiz edilip hesaplandığı " @@ -10065,10 +12092,10 @@ msgstr "Kenar-nesne boşluğu" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" "En içteki kenar çizgisi ile nesne arasındaki boşluk, kenarlığın daha kolay " -"çıkarılmasını sağlayabilir" +"çıkarılmasını sağlayabilir." msgid "Brim ears" msgstr "Kenar kulakları" @@ -10080,8 +12107,8 @@ msgid "Brim ear max angle" msgstr "Kenar kulak maksimum açısı" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Kenarlı bir kulağın görünmesine izin veren maksimum açı.\n" @@ -10092,31 +12119,46 @@ msgid "Brim ear detection radius" msgstr "Kenar kulak algılama yarıçapı" msgid "" -"The geometry will be decimated before dectecting sharp angles. This parameter " +"The geometry will be decimated before detecting sharp angles. This parameter " "indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"0 to deactivate." msgstr "" -"Keskin açılar tespit edilmeden önce geometrinin büyük bir kısmı yok " -"edilecektir. Bu parametre, ondalık sapmanın minimum uzunluğunu gösterir.\n" -"Devre dışı bırakmak için 0" +"Keskin açılar algılanmadan önce geometri azaltılacaktır. Bu parametre, " +"azaltma için minimum sapma uzunluğunu belirtir.\n" +"Devre dışı bırakmak için 0." -msgid "Compatible machine" -msgstr "Uyumlu makine" +msgid "Select printers" +msgstr "Yazıcıları seçin" msgid "upward compatible machine" msgstr "yukarı doğru uyumlu makine" -msgid "Compatible machine condition" -msgstr "Uyumlu yazıcıdurumu" +msgid "Condition" +msgstr "Durum" -msgid "Compatible process profiles" -msgstr "Uyumlu süreç profilleri" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Etkin bir yazıcı profilinin yapılandırma değerlerini kullanan bir boole " +"ifadesi. Bu ifade doğru olarak değerlendirilirse bu profilin etkin yazıcı " +"profiliyle uyumlu olduğu kabul edilir." -msgid "Compatible process profiles condition" -msgstr "Uyumlu süreç profillerinin durumu" +msgid "Select profiles" +msgstr "Profilleri seçin" -msgid "Print sequence, layer by layer or object by object" -msgstr "Yazdırma sırası, katman katman veya nesne nesne" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Etkin yazdırma profilinin yapılandırma değerlerini kullanan bir boole " +"ifadesi. Bu ifade doğru olarak değerlendirilirse bu profilin etkin yazdırma " +"profiliyle uyumlu olduğu kabul edilir." + +msgid "Print sequence, layer by layer or object by object." +msgstr "Yazdırma sırası, katman katman veya nesne nesne." msgid "By layer" msgstr "Katmana göre" @@ -10125,10 +12167,10 @@ msgid "By object" msgstr "Nesneye göre" msgid "Intra-layer order" -msgstr "Katman içi sipariş" +msgstr "Katman içi sıra" -msgid "Print order within a single layer" -msgstr "Tek bir katmanda yazdırma sırası" +msgid "Print order within a single layer." +msgstr "Tek bir katmanda yazdırma sırası." msgid "As object list" msgstr "Nesne listesi olarak" @@ -10140,36 +12182,34 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" -"Son katman süresinin \"Maksimum fan hızı eşiği\"ndeki katman süresi eşiğinden " -"kısa olmamasını sağlamak amacıyla yazdırma hızını yavaşlatmak için bu " -"seçeneği etkinleştirin, böylece katman daha uzun süre soğutulabilir. Bu, iğne " -"ve küçük detaylar için soğutma kalitesini artırabilir" +"Son katman süresinin \"Maksimum fan hızı eşiği\"ndeki katman süresi " +"eşiğinden kısa olmamasını sağlamak amacıyla yazdırma hızını yavaşlatmak için " +"bu seçeneği etkinleştirin, böylece katman daha uzun süre soğutulabilir. Bu, " +"iğne ve küçük detaylar için soğutma kalitesini artırabilir." msgid "Normal printing" msgstr "Normal baskı" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" -"İlk katman dışında hem normal yazdırmanın hem de ilerlemenin varsayılan ivmesi" - -msgid "mm/s²" -msgstr "mm/s²" +"İlk katman dışında hem normal yazdırmanın hem de ilerlemenin varsayılan " +"ivmesi." msgid "Default filament profile" msgstr "Varsayılan filament profili" -msgid "Default filament profile when switch to this machine profile" -msgstr "Bu yazıcıprofiline geçildiğinde varsayılan filament profili" +msgid "Default filament profile when switching to this machine profile." +msgstr "Bu yazıcı profiline geçildiğinde varsayılan filament profili." msgid "Default process profile" msgstr "Varsayılan süreç profili" -msgid "Default process profile when switch to this machine profile" -msgstr "Bu yazıcıprofiline geçildiğinde varsayılan işlem profili" +msgid "Default process profile when switching to this machine profile." +msgstr "Bu yazıcı profiline geçildiğinde varsayılan işlem profili." msgid "Activate air filtration" msgstr "Hava filtrelemesini etkinleştirin" @@ -10182,37 +12222,37 @@ msgid "Fan speed" msgstr "Fan hızı" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Baskı sırasında egzoz fanının hızı. Bu hız, filament özel gcode'undaki hızın " -"üzerine yazılacaktır" +"üzerine yazılacaktır." -msgid "Speed of exhaust fan after printing completes" -msgstr "Baskı tamamlandıktan sonra egzoz fanının hızı" +msgid "Speed of exhaust fan after printing completes." +msgstr "Baskı tamamlandıktan sonra egzoz fanının hızı." msgid "No cooling for the first" msgstr "Soğutmayı devre dışı bırak" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"İlk belirli katmanlar için tüm soğutma fanını kapatın. Daha iyi baskı plakası " -"yapışması sağlamak için ilk katmanın soğutma fanı kapatılırdı" +"İlk belirli katmanlar için tüm soğutma fanını kapatın. Daha iyi baskı " +"plakası yapışması sağlamak için ilk katmanın soğutma fanı kapatılırdı." msgid "Don't support bridges" msgstr "Köprülerde destek olmasın" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Desteği çok büyük yapan tüm köprü alanını desteklemeyin. Bridge genellikle " -"çok uzun olmasa da destek olmadan doğrudan yazdırılabilir" +"çok uzun olmasa da destek olmadan doğrudan yazdırılabilir." -msgid "Thick bridges" -msgstr "Kalın köprüler" +msgid "Thick external bridges" +msgstr "Kalın dış köprüler" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10236,67 +12276,133 @@ msgstr "" "açık olması önerilir. Ancak büyük nozul uçları kullanıyorsanız kapatmayı " "düşünün." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Küçük iç köprüleri filtrelemeyin (deneysel)" +msgid "Extra bridge layers (beta)" +msgstr "Ekstra köprü katmanları (beta)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted or " -"curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works well " -"in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for most " -"difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal overhang. " -"This option is useful for heavily slanted top surface models. However, in " -"most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Bu seçenek, aşırı eğimli veya kavisli modellerde üst yüzeylerdeki " -"yastıklamanın azaltılmasına yardımcı olabilir.\n" +"Bu seçenek, iç ve/veya dış köprüler üzerinde ekstra bir köprü katmanının " +"oluşturulmasına olanak sağlar.\n" "\n" -"Varsayılan olarak küçük iç köprüler filtrelenir ve iç katı dolgu doğrudan " -"seyrek dolgunun üzerine yazdırılır. Bu çoğu durumda işe yarar ve üstün yüzey " -"kalitesinden çok fazla ödün vermeden yazdırmayı hızlandırır. \n" +"Ekstra köprü katmanları, katı dolgunun daha iyi desteklenmesi nedeniyle " +"köprü görünümünün ve güvenilirliğinin iyileştirilmesine yardımcı olur. Bu, " +"özellikle köprü ve katı doldurma hızlarının büyük ölçüde değiştiği hızlı " +"yazıcılarda kullanışlıdır. Ekstra köprü katmanı, üst yüzeylerde " +"yastıklamanın azaltılmasının yanı sıra, dış köprü katmanının çevre " +"çevrelerinden daha az ayrılmasıyla sonuçlanır.\n" "\n" -"Bununla birlikte, özellikle çok düşük seyrek dolgu yoğunluğunun kullanıldığı " -"aşırı eğimli veya kavisli modellerde, bu durum desteklenmeyen katı dolgunun " -"kıvrılmasına ve yastıklanmaya neden olmasına neden olabilir.\n" +"Dilimlenmiş modelde belirli sorunlar bulunmadığı sürece, genellikle bunun en " +"azından ‘Yalnızca dış köprü’ olarak ayarlanması önerilir.\n" "\n" -"Bu seçeneğin etkinleştirilmesi, iç köprü katmanını hafif desteklenmeyen " -"dahili katı dolgu üzerine yazdıracaktır. Aşağıdaki seçenekler filtreleme " -"miktarını, yani oluşturulan dahili köprülerin miktarını kontrol eder.\n" -"\n" -"Devre Dışı - Bu seçeneği devre dışı bırakır. Bu varsayılan davranıştır ve " -"çoğu durumda iyi çalışır.\n" -"\n" -"Sınırlı filtreleme - Aşırı eğimli yüzeylerde iç köprüler oluştururken " -"gereksiz iç köprülerin oluşmasını da önler. Bu, çoğu zor modelde işe yarar.\n" -"\n" -"Filtreleme yok - Her potansiyel dahili çıkıntıda dahili köprüler oluşturur. " -"Bu seçenek, aşırı eğimli üst yüzey modelleri için kullanışlıdır. Ancak çoğu " -"durumda çok fazla gereksiz köprü oluşturur." +"Seçenekler:\n" +"1. Devre Dışı - ikinci köprü katmanlarını oluşturmaz. Bu varsayılan değerdir " +"ve uyumluluk amacıyla ayarlanmıştır.\n" +"2. Yalnızca dış köprü - yalnızca dışa bakan köprüler için ikinci köprü " +"katmanları oluşturur. Belirlenen çevre sayısından daha kısa veya daha dar " +"olan küçük köprülerin, ikinci bir köprü katmanından faydalanamayacakları " +"için atlanacağını lütfen unutmayın. Oluşturulursa ikinci köprü katmanı, " +"köprü mukavemetini güçlendirmek için birinci köprü katmanına paralel olarak " +"ekstrüzyona tabi tutulacaktır.\n" +"3. Yalnızca iç köprü - yalnızca seyrek dolgu üzerindeki iç köprüler için " +"ikinci köprü katmanları oluşturur. Lütfen iç köprülerin modelinizin üst " +"kabuk katmanı sayımına dahil edildiğini unutmayın. İkinci iç köprü katmanı, " +"birinciye mümkün olduğu kadar dik olacak şekilde ekstrüzyona tabi " +"tutulacaktır. Aynı adada farklı köprü açılarına sahip birden fazla bölge " +"mevcutsa açı referansı olarak o adanın son bölgesi seçilecektir.\n" +"4. Tümüne uygula - hem iç hem de dış köprüler için ikinci köprü katmanları " +"oluşturur\n" msgid "Disabled" msgstr "Devredışı" +msgid "External bridge only" +msgstr "Yalnızca dış köprü" + +msgid "Internal bridge only" +msgstr "Yalnızca iç köprü" + +msgid "Apply to all" +msgstr "Hepsine uygula" + +msgid "Filter out small internal bridges" +msgstr "Küçük iç köprüleri filtreleyin" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Bu seçenek, aşırı eğimli veya kavisli modellerde üst yüzeylerdeki " +"yastıklamayı azaltmaya yardımcı olabilir.\n" +"Varsayılan olarak küçük iç köprüler filtrelenir ve iç katı dolgu doğrudan " +"seyrek dolgunun üzerine yazdırılır. Bu çoğu durumda işe yarar ve üstün yüzey " +"kalitesinden çok fazla ödün vermeden yazdırmayı hızlandırır.\n" +"Bununla birlikte, çok eğimli veya kavisli modellerde, özellikle çok düşük " +"seyrek dolgu yoğunluğunun kullanıldığı durumlarda bu, desteklenmeyen katı " +"dolgunun kıvrılmasına ve yastıklanmaya neden olmasına neden olabilir.\n" +"Sınırlı filtrelemenin etkinleştirilmesi veya hiç filtre uygulanmaması, " +"dahili köprü katmanını hafif desteksiz iç katı dolgu üzerine yazdıracaktır. " +"Aşağıdaki seçenekler filtrelemenin hassasiyetini kontrol eder, yani iç " +"köprülerin nerede oluşturulduğunu kontrol ederler.\n" +"1. Filtrele - bu seçeneği etkinleştirir. Bu varsayılan davranıştır ve çoğu " +"durumda iyi çalışır.\n" +"2. Sınırlı filtreleme - aşırı eğimli yüzeylerde iç köprüler oluştururken " +"gereksiz köprülerden kaçınır. Bu, çoğu zor modelde işe yarar.\n" +"3. Filtreleme yok - her potansiyel dahili çıkıntıda iç köprüler oluşturur. " +"Bu seçenek aşırı eğimli üst yüzey modelleri için kullanışlıdır; ancak çoğu " +"durumda çok fazla gereksiz köprü oluşturur" + msgid "Limited filtering" -msgstr "Sınırlı filtreleme" +msgstr "Sınırlı filtreli" msgid "No filtering" msgstr "Filtresiz" @@ -10316,21 +12422,21 @@ msgstr "" msgid "End G-code" msgstr "Bitiş G kodu" -msgid "End G-code when finish the whole printing" -msgstr "Tüm yazdırmayı tamamladığında çalışacak olan G Kodu" +msgid "End G-code when finishing the entire print." +msgstr "Tüm yazdırmayı tamamladığında çalışacak olan G Kodu." -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Nesne Arası Gcode" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Nesnelerin arasına Gcode ekleyin. Bu parametre yalnızca modellerinizi nesne " -"nesne yazdırdığınızda etkili olacaktır" +"nesne yazdırdığınızda etkili olacaktır." -msgid "End G-code when finish the printing of this filament" -msgstr "Bu filament ile baskı bittiğinde çalışacak G kodu" +msgid "End G-code when finishing the printing of this filament." +msgstr "Bu filament ile baskı bittiğinde çalışacak G kod." msgid "Ensure vertical shell thickness" msgstr "Dikey kabuk kalınlığını onayla" @@ -10363,14 +12469,8 @@ msgstr "Orta" msgid "Top surface pattern" msgstr "Üst yüzey deseni" -msgid "Line pattern of top surface infill" -msgstr "Üst yüzey dolgusunun çizgi deseni" - -msgid "Concentric" -msgstr "Konsantrik" - -msgid "Rectilinear" -msgstr "Doğrusal" +msgid "Line pattern of top surface infill." +msgstr "Üst yüzey dolgusunun çizgi deseni." msgid "Monotonic" msgstr "Monotonic" @@ -10378,9 +12478,15 @@ msgstr "Monotonic" msgid "Monotonic line" msgstr "Monotonik çizgi" +msgid "Rectilinear" +msgstr "Doğrusal" + msgid "Aligned Rectilinear" msgstr "Hizalanmış doğrusal" +msgid "Concentric" +msgstr "Konsantrik" + msgid "Hilbert Curve" msgstr "Hilbert eğrisi" @@ -10393,11 +12499,11 @@ msgstr "Sekizgen spiral" msgid "Bottom surface pattern" msgstr "Alt yüzey deseni" -msgid "Line pattern of bottom surface infill, not bridge infill" -msgstr "Köprü dolgusu değil, alt yüzey dolgusunun çizgi deseni" +msgid "Line pattern of bottom surface infill, not bridge infill." +msgstr "Köprü dolgusu değil, alt yüzey dolgusunun çizgi deseni." msgid "Internal solid infill pattern" -msgstr "İç dolgu deseni" +msgstr "İç katı dolgu deseni" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " @@ -10417,8 +12523,8 @@ msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." msgstr "" -"En dışta görünen ve görünen dış duvarın hızı. Daha iyi kalite elde etmek için " -"iç duvar hızından daha yavaş olması kullanılır." +"En dışta görünen ve görünen dış duvarın hızı. Daha iyi kalite elde etmek " +"için iç duvar hızından daha yavaş olması kullanılır." msgid "Small perimeters" msgstr "Küçük çevre (perimeter)" @@ -10438,17 +12544,19 @@ msgid "Small perimeters threshold" msgstr "Küçük çevre (perimeter) eşiği" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" -msgstr "Bu, küçük çevre uzunluğu için eşiği belirler. Varsayılan eşik 0 mm'dir" +"This sets the threshold for small perimeter length. Default threshold is 0mm." +msgstr "" +"Bu, küçük çevre uzunluğu için eşiği belirler. Varsayılan eşik 0 mm'dir." msgid "Walls printing order" msgstr "Duvar baskı sırası" +#, fuzzy msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" -"Use Inner/Outer for best overhangs. This is because the overhanging walls can " -"adhere to a neighouring perimeter while printing. However, this option " +"Use Inner/Outer for best overhangs. This is because the overhanging walls " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10458,15 +12566,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" "İç (iç) ve dış (dış) duvarların baskı sırası.\n" "\n" @@ -10479,16 +12585,14 @@ msgstr "" "kalitesi ve boyutsal doğruluk için İç/Dış/İç seçeneğini kullanın. Ancak, dış " "duvarın üzerine baskı yapılacak bir iç çevre olmadığından sarkma performansı " "düşecektir. Bu seçenek, önce 3. çevreden itibaren iç duvarları, ardından dış " -"çevreyi ve son olarak da birinci iç çevreyi yazdırdığından etkili olması için " -"en az 3 duvar gerektirir. Bu seçenek çoğu durumda Dış/İç seçeneğine karşı " -"önerilir. \n" +"çevreyi ve son olarak da birinci iç çevreyi yazdırdığından etkili olması " +"için en az 3 duvar gerektirir. Bu seçenek çoğu durumda Dış/İç seçeneğine " +"karşı önerilir.\n" "\n" "İç/Dış/İç seçeneğinin aynı dış duvar kalitesi ve boyutsal doğruluk " "avantajları için Dış/İç seçeneğini kullanın. Bununla birlikte, yeni bir " -"katmanın ilk ekstrüzyonu görünür bir yüzey üzerinde başladığından z dikişleri " -"daha az tutarlı görünecektir.\n" -"\n" -" " +"katmanın ilk ekstrüzyonu görünür bir yüzey üzerinde başladığından Z " +"dikişleri daha az tutarlı görünecektir." msgid "Inner/Outer" msgstr "İç/Dış" @@ -10507,10 +12611,10 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " -"the printed walls where it is attached to them, resulting in a worse external " -"surface finish. It can also cause the infill to shine through the external " -"surfaces of the part." +"neighbouring infill to adhere to. However, the infill will slightly push out " +"the printed walls where it is attached to them, resulting in a worse " +"external surface finish. It can also cause the infill to shine through the " +"external surfaces of the part." msgstr "" "Duvar/dolgu sırası. Onay kutusu işaretlenmediğinde duvarlar önce yazdırılır, " "bu çoğu durumda en iyi şekilde çalışır.\n" @@ -10528,18 +12632,18 @@ msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" -"By default all walls are extruded in counter-clockwise, unless Reverse on odd " -"is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"By default all walls are extruded in counter-clockwise, unless Reverse on " +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" "Yukarıdan aşağıya bakıldığında duvar döngülerinin ekstrüzyona uğradığı yön.\n" "\n" -"Tek sayıyı ters çevir seçeneği etkinleştirilmedikçe, varsayılan olarak tüm " -"duvarlar saat yönünün tersine ekstrüde edilir. Bunu Otomatik dışında herhangi " -"bir seçeneğe ayarlayın, Ters açıklığa bakılmaksızın duvar yönünü " -"zorlayacaktır.\n" +"Çift yönlü ters çevirme seçeneği etkinleştirilmediği sürece, varsayılan " +"olarak tüm duvarlar saat yönünün tersine ekstrüde edilir. Bunu Otomatik " +"dışında herhangi bir seçeneğe ayarlayın, Ters çevirmeden bağımsız olarak " +"duvar yönünü eşit olarak zorlayacaktır.\n" "\n" "Spiral vazo modu etkinse bu seçenek devre dışı bırakılacaktır." @@ -10566,8 +12670,8 @@ msgid "" "Distance of the nozzle tip to the lid. Used for collision avoidance in by-" "object printing." msgstr "" -"Nozul ucunun kapağa olan mesafesi. Nesneye göre yazdırmada çarpışmayı önlemek " -"için kullanılır." +"Nozul ucunun kapağa olan mesafesi. Nesneye göre yazdırmada çarpışmayı " +"önlemek için kullanılır." msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " @@ -10590,41 +12694,43 @@ msgid "" "probe's XY offset, most printers are unable to probe the entire bed. To " "ensure the probe point does not go outside the bed area, the minimum and " "maximum points of the bed mesh should be set appropriately. Snapmaker Orca " -"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed " -"these min/max points. This information can usually be obtained from your " -"printer manufacturer. The default setting is (-99999, -99999), which means " -"there are no limits, thus allowing probing across the entire bed." +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (-99999, -99999), which " +"means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Bu seçenek, izin verilen yatak ağ alanı için minimum noktayı ayarlar. Prob XY " -"ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob noktasının " -"yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum ve maksimum " -"noktaları uygun şekilde ayarlanmalıdır. Snapmaker Orca, adaptive_bed_mesh_min/" -"adaptive_bed_mesh_max değerlerinin bu min/maks noktalarını aşmamasını sağlar. " -"Bu bilgi genellikle yazıcınızın üreticisinden edinilebilir. Varsayılan ayar " -"(-99999, -99999) şeklindedir; bu, herhangi bir sınırın olmadığı anlamına " -"gelir, dolayısıyla yatağın tamamında problamaya izin verilir." +"Bu seçenek, izin verilen yatak ağ alanı için minimum noktayı ayarlar. Prob " +"XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob noktasının " +"yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum ve " +"maksimum noktaları uygun şekilde ayarlanmalıdır. Snapmaker Orca, " +"adaptive_bed_mesh_min/adaptive_bed_mesh_max değerlerinin bu min/maks " +"noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın üreticisinden " +"edinilebilir. Varsayılan ayar (-99999, -99999) şeklindedir; bu, herhangi bir " +"sınırın olmadığı anlamına gelir, dolayısıyla yatağın tamamında problamaya " +"izin verilir." msgid "Bed mesh max" -msgstr "Maksimum yatak ağı" +msgstr "Maksimum plaka ağı" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " "probe's XY offset, most printers are unable to probe the entire bed. To " "ensure the probe point does not go outside the bed area, the minimum and " "maximum points of the bed mesh should be set appropriately. Snapmaker Orca " -"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed " -"these min/max points. This information can usually be obtained from your " -"printer manufacturer. The default setting is (99999, 99999), which means " -"there are no limits, thus allowing probing across the entire bed." +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (99999, 99999), which " +"means there are no limits, thus allowing probing across the entire bed." msgstr "" -"Bu seçenek, izin verilen yatak ağ alanı için maksimum noktayı ayarlar. Probun " -"XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob noktasının " -"yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum ve maksimum " -"noktaları uygun şekilde ayarlanmalıdır. Snapmaker Orca, adaptive_bed_mesh_min/" -"adaptive_bed_mesh_max değerlerinin bu min/maks noktalarını aşmamasını sağlar. " -"Bu bilgi genellikle yazıcınızın üreticisinden edinilebilir. Varsayılan ayar " -"(99999, 99999) şeklindedir; bu, herhangi bir sınırın olmadığı anlamına gelir, " -"dolayısıyla yatağın tamamında problamaya izin verilir." +"Bu seçenek, izin verilen yatak ağ alanı için maksimum noktayı ayarlar. " +"Probun XY ofseti nedeniyle çoğu yazıcı yatağın tamamını tarayamaz. Prob " +"noktasının yatak alanı dışına çıkmamasını sağlamak için yatak ağının minimum " +"ve maksimum noktaları uygun şekilde ayarlanmalıdır. Snapmaker Orca, " +"adaptive_bed_mesh_min/adaptive_bed_mesh_max değerlerinin bu min/maks " +"noktalarını aşmamasını sağlar. Bu bilgi genellikle yazıcınızın üreticisinden " +"edinilebilir. Varsayılan ayar (99999, 99999) şeklindedir; bu, herhangi bir " +"sınırın olmadığı anlamına gelir, dolayısıyla yatağın tamamında problamaya " +"izin verilir." msgid "Probe point distance" msgstr "Prob noktası mesafesi" @@ -10641,53 +12747,209 @@ msgid "Mesh margin" msgstr "Yatak ağı boşluğu" msgid "" -"This option determines the additional distance by which the adaptive bed mesh " -"area should be expanded in the XY directions." +"This option determines the additional distance by which the adaptive bed " +"mesh area should be expanded in the XY directions." msgstr "" "Bu seçenek, uyarlanabilir yatak ağ alanının XY yönlerinde genişletilmesi " "gereken ek mesafeyi belirler." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Ekstruder rengi" -msgid "Only used as a visual help on UI" -msgstr "Yalnızca kullanıcı arayüzünde görsel yardım olarak kullanılır" +msgid "Only used as a visual help on UI." +msgstr "Yalnızca kullanıcı arayüzünde görsel yardım olarak kullanılır." msgid "Extruder offset" -msgstr "Ekstruder konum" +msgstr "Ekstruder konumu" msgid "Flow ratio" msgstr "Akış oranı" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 and " -"1.05. Maybe you can tune this value to get nice flat surface when there has " -"slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Malzeme, erimiş hal ile kristal hal arasında geçiş yaptıktan sonra hacimsel " "değişime sahip olabilir. Bu ayar, bu filamentin gcode'daki tüm ekstrüzyon " "akışını orantılı olarak değiştirir. Önerilen değer aralığı 0,95 ile 1,05 " "arasındadır. Belki hafif taşma veya taşma olduğunda güzel düz bir yüzey elde " -"etmek için bu değeri ayarlayabilirsiniz" - -msgid "Enable pressure advance" -msgstr "Basınç Avansı (PA)" +"etmek için bu değeri ayarlayabilirsiniz." msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Malzeme, erimiş hal ile kristal hal arasında geçiş yaptıktan sonra hacimsel " +"değişime sahip olabilir. Bu ayar, bu filamentin gcode’daki tüm ekstrüzyon " +"akışını orantılı olarak değiştirir. Önerilen değer aralığı 0,95 ile 1,05 " +"arasındadır. Belki hafif taşma veya taşma olduğunda güzel düz bir yüzey elde " +"etmek için bu değeri ayarlayabilirsiniz.\n" +"\n" +"Nihai nesne akış oranı, bu değerin filament akış oranıyla çarpılmasıyla elde " +"edilir." + +msgid "Enable pressure advance" +msgstr "Basınç avansı" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" "Basınç avansını etkinleştirin; etkinleştirildiğinde otomatik kalibrasyon " "sonucunun üzerine yazılacaktır." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Basınç avansı (Klipper) Doğrusal ilerleme faktörü (Marlin)" +msgid "Enable adaptive pressure advance (beta)" +msgstr "Uyarlanabilir basınç ilerlemesini etkinleştir (beta)" + +#, no-c-format, no-boost-format msgid "" -"Default line width if other line widths are set to 0. If expressed as a %, it " -"will be computed over the nozzle diameter." +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Baskı hızlarının artmasıyla (ve dolayısıyla püskürtme ucunda hacimsel akışın " +"artmasıyla) ve hızlanmaların artmasıyla, etkin basınç değerinin tipik olarak " +"azaldığı gözlemlenmiştir. Bu, tek bir basınç değerinin tüm özellikler için " +"her zaman 100% optimal olmadığı ve genellikle daha düşük akış hızına ve " +"ivmeye sahip özelliklerde çok fazla çıkıntıya neden olmayan ve aynı zamanda " +"daha hızlı özelliklerde boşluklara neden olmayan bir uzlaşma değerinin " +"kullanıldığı anlamına gelir.\n" +"\n" +"Bu özellik, yazıcınızın ekstrüzyon sisteminin tepkisini hacimsel akış hızına " +"ve baskı yaptığı ivmeye bağlı olarak modelleyerek bu sınırlamayı gidermeyi " +"amaçlamaktadır. Dahili olarak, herhangi bir hacimsel akış hızı ve ivme için " +"gerekli basınç ilerlemesini tahmin edebilen uygun bir model oluşturur ve bu " +"daha sonra mevcut yazdırma koşullarına bağlı olarak yazıcıya gönderilir.\n" +"\n" +"Etkinleştirildiğinde yukarıdaki basınç ilerleme değeri geçersiz kılınır. " +"Bununla birlikte, yukarıdaki makul bir varsayılan değerin, bir geri dönüş " +"olarak ve takım değişimi sırasında kullanılması önemle tavsiye edilir.\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Uyarlanabilir basınç ilerleme ölçümleri (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Basınç ilerlemesi (basınç) değerlerinin setlerini, hacimsel akış hızlarını " +"ve ölçüldükleri ivmeleri virgülle ayırarak ekleyin. Satır başına bir değer " +"kümesi. Örneğin\n" +"0.04,3.96,3000\n" +"0,033,3,96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Nasıl kalibre edilir:\n" +"1. Hızlanma değeri başına en az 3 hız için basınç ilerleme testini " +"çalıştırın. Testin en azından dış çevrelerin hızı, iç çevrelerin hızı ve " +"profilinizdeki en hızlı özellik yazdırma hızı (genellikle seyrek veya katı " +"dolgudur) için çalıştırılması önerilir. Daha sonra bunları, en yavaş ve en " +"hızlı yazdırma hızlanmaları için aynı hızlarda çalıştırın ve klipper giriş " +"şekillendirici tarafından verilen önerilen maksimum hızlanmadan daha hızlı " +"değil.\n" +"2. Her hacimsel akış hızı ve ivme için en uygun PA değerini not edin. Renk " +"şeması açılır menüsünden akışı seçerek ve yatay kaydırıcıyı PA desen " +"çizgileri üzerinde hareket ettirerek akış numarasını bulabilirsiniz. Numara " +"sayfanın altında görünmelidir. İdeal PA değeri hacimsel akış ne kadar yüksek " +"olursa o kadar azalmalıdır. Değilse, ekstruderinizin doğru şekilde " +"çalıştığını doğrulayın. Ne kadar yavaş ve daha az ivmeyle yazdırırsanız, " +"kabul edilebilir PA değerleri aralığı o kadar geniş olur. Hiçbir fark " +"görünmüyorsa, daha hızlı olan testteki PA değerini kullanın.\n" +"3. Buradaki metin kutusuna PA değerleri, Akış ve Hızlanma üçlüsünü girin ve " +"filament profilinizi kaydedin" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Çıkıntılar için uyarlanabilir basınç ilerlemesini etkinleştirin (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Aynı özellik içinde akış değiştiğinde ve çıkıntılar için uyarlanabilir PA’yı " +"etkinleştirin. Bu deneysel bir seçenektir, sanki basınç profili doğru " +"ayarlanmazsa, çıkma öncesi ve sonrası dış yüzeylerde yeknesaklık sorunlarına " +"neden olacaktır.\n" + +msgid "Pressure advance for bridges" +msgstr "Köprüler için basınç ilerlemesi" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Köprüler için basınç ilerleme değeri. Devre dışı bırakmak için 0’a " +"ayarlayın.\n" +"\n" +" Köprüleri yazdırırken daha düşük bir basınç değeri, köprülerden hemen sonra " +"hafif ekstrüzyon görünümünün azaltılmasına yardımcı olur. Bunun nedeni, " +"havada yazdırma sırasında nozuldaki basınç düşüşüdür ve daha düşük bir " +"basınç, bunu önlemeye yardımcı olur." + +msgid "" +"Default line width if other line widths are set to 0. If expressed as a %, " +"it will be computed over the nozzle diameter." msgstr "" "Diğer çizgi genişlikleri 0'a ayarlanmışsa varsayılan çizgi genişliği. % " "olarak ifade edilirse nozul çapı üzerinden hesaplanacaktır." @@ -10696,12 +12958,13 @@ msgid "Keep fan always on" msgstr "Fanı her zaman açık tut" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run at " -"least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Bu ayarı etkinleştirirseniz, parça soğutma fanı hiçbir zaman durdurulmayacak " "ve başlatma ve durdurma sıklığını azaltmak için en azından minimum hızda " -"çalışacaktır" +"çalışacaktır." msgid "Don't slow down outer walls" msgstr "Dış duvarları yavaşlatma" @@ -10710,24 +12973,21 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "Bu ayar etkinleştirildiğinde, dış çevrelerin minimum katman süresine uyması " "için yavaşlatılmamasını sağlar. Bu, özellikle aşağıdaki durumlarda yardımcı " "olur:\n" -"\n" "1. Parlak filamentler yazdırırken parlaklıktaki değişikliklerden kaçınmak " "için\n" "2. Z bantlanması gibi görünen hafif duvar kusurları yaratabilecek dış duvar " "hızındaki değişikliklerden kaçınmak için\n" "3. Dış duvarlarda VFAs (ince kusurlar) oluşturan hızlarda yazdırmaktan " -"kaçınmak için\n" +"kaçınmak için" msgid "Layer time" msgstr "Katman süresi" @@ -10735,17 +12995,21 @@ msgstr "Katman süresi" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Tahmini süresi bu değerden kısa olan katlarda parça soğutma fanı devreye " "girecektir. Fan hızı, katman yazdırma süresine göre minimum ve maksimum fan " -"hızları arasında enterpole edilir" +"hızları arasında enterpole edilir." msgid "Default color" msgstr "Varsayılan renk" -msgid "Default filament color" -msgstr "Varsayılan filament rengi" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Varsayılan filament rengi\n" +"Değeri sistem varsayılanına sıfırlamak için sağ tıklayın." msgid "Filament notes" msgstr "Filament Notları" @@ -10763,46 +13027,111 @@ msgstr "" "Filamenti yazdırmak için gereken minimum HRC nozul. Sıfır, nozulun HRC'sinin " "kontrol edilmediği anlamına gelir." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Bu ayar, saniyede ne kadar miktarda filamentin eritilip ekstrude " "edilebileceğini gösterir. Çok yüksek ve makul olmayan hız ayarı durumunda, " -"yazdırma hızı maksimum hacimsel hız ile sınırlanır. Sıfır olamaz" - -msgid "mm³/s" -msgstr "mm³/s" +"yazdırma hızı maksimum hacimsel hız ile sınırlanır. Sıfır olamaz." msgid "Filament load time" msgstr "Filament yükleme süresi" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Filamenti değiştirdiğinizde yeni filament yükleme zamanı. Yalnızca " -"istatistikler için" +"Filamenti değiştirdiğinizde yeni filament yükleme zamanı. Genellikle tek " +"ekstruderli çok malzemeli makineler için geçerlidir. Araç değiştiriciler " +"veya çok takımlı makineler için bu değer genellikle 0’dır. Yalnızca " +"istatistikler için." msgid "Filament unload time" msgstr "Filament boşaltma süresi" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Filamenti değiştirdiğinizde eski filamenti boşaltma zamanı. Yalnızca " -"istatistikler için" +"Filamenti değiştirdiğinizde eski filamenti boşaltma zamanı. Genellikle tek " +"ekstruderli çok malzemeli makineler için geçerlidir. Araç değiştiriciler " +"veya çok takımlı makineler için bu değer genellikle 0’dır. Yalnızca " +"istatistikler için." + +msgid "Tool change time" +msgstr "Takım değiştirme süresi" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Araç değiştirmek için harcanan zaman. Genellikle araç değiştiriciler veya " +"çok araçlı makineler için geçerlidir. Tek ekstruderli çok malzemeli " +"makineler için bu değer genellikle 0’dır. Yalnızca istatistikler için." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." msgstr "" "Filament çapı, gcode'da ekstrüzyonu hesaplamak için kullanılır; bu nedenle " -"önemlidir ve doğru olmalıdır" +"önemlidir ve doğru olmalıdır." msgid "Pellet flow coefficient" msgstr "Pelet akış katsayısı" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10818,22 +13147,52 @@ msgstr "" "\n" "filament_çapı = sqrt( (4 * pellet_akış_katsayısı) / PI )" -msgid "Shrinkage" -msgstr "Büzüşme" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Büzülme (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" -"Filamentin soğuduktan sonra alacağı büzülme yüzdesini girin (100 mm yerine 94 " -"mm ölçerseniz 94%). Parça, telafi etmek için xy'de ölçeklendirilecektir. " +"Filamentin soğuduktan sonra alacağı büzülme yüzdesini girin (100 mm yerine " +"94 mm ölçerseniz 94%). Parça, telafi etmek için xy'de ölçeklendirilecektir. " "Yalnızca çevre için kullanılan filament dikkate alınır.\n" -"Bu telafi kontrollerden sonra yapıldığından, nesneler arasında yeterli boşluk " -"bıraktığınızdan emin olun." +"Bu telafi kontrollerden sonra yapıldığından, nesneler arasında yeterli " +"boşluk bıraktığınızdan emin olun." + +msgid "Shrinkage (Z)" +msgstr "Büzülme (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Filamentin soğuduktan sonra alacağı çekme yüzdesini girin (100 mm yerine 94 " +"mm ölçerseniz %94). Telafi etmek için parça Z olarak ölçeklendirilecektir." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" msgid "Loading speed" msgstr "Yükleme hızı" @@ -10851,7 +13210,7 @@ msgid "Unloading speed" msgstr "Boşaltma hızı" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" "Filamenti silme kulesinde boşaltmak için kullanılan hız (sıkıştırmadan hemen " @@ -10869,8 +13228,8 @@ msgid "Delay after unloading" msgstr "Boşaltma işleminden sonra gecikme" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Filament boşaltıldıktan sonra beklenmesi gereken süre. Orijinal boyutlara " @@ -10884,8 +13243,27 @@ msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"Filament, soğutma tüpleri içinde ileri geri hareket ettirilerek soğutulur. Bu " -"sayısını belirtin." +"Filament, soğutma tüpleri içinde ileri geri hareket ettirilerek soğutulur. " +"Bu sayısını belirtin." + +msgid "Stamping loading speed" +msgstr "Damgalama yükleme hızı" + +msgid "Speed used for stamping." +msgstr "Damgalama için kullanılan hız." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Soğutma tüpünün merkezinden ölçülen damgalama mesafesi" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Sıfırdan farklı bir değere ayarlanırsa filaman bireysel soğutma hareketleri " +"arasında (“damgalama”) nüzule doğru hareket ettirilir. Bu seçenek, filamanın " +"tekrar geri çekilmesinden önce bu hareketin ne kadar sürmesi gerektiğini " +"yapılandırır." msgid "Speed of the first cooling move" msgstr "İlk soğutma hareketi hızı" @@ -10899,9 +13277,9 @@ msgstr "Silme kulesi üzerinde minimum boşaltım" msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " -"stable. Before purging the print head into an infill or a sacrificial object, " -"Snapmaker Orca will always prime this amount of material into the wipe tower to " -"produce successive infill or sacrificial object extrusions reliably." +"stable. Before purging the print head into an infill or a sacrificial " +"object, Snapmaker Orca will always prime this amount of material into the wipe " +"tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" "Bir takım değişiminden sonra, yeni yüklenen filamentin nozul içindeki kesin " "konumu bilinmeyebilir ve filament basıncı muhtemelen henüz stabil değildir. " @@ -10916,15 +13294,6 @@ msgstr "Son soğutma hareketi hızı" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Soğutma hareketleri bu hıza doğru giderek hızlanır." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is added " -"to the total print time by the G-code time estimator." -msgstr "" -"Yazıcı donanım yazılımının (veya Çoklu Malzeme Ünitesi 2.0'ın) takım " -"değişikliği sırasında (T kodu yürütülürken) yeni bir filament yükleme süresi. " -"Bu süre, G kodu zaman tahmincisi tarafından toplam baskı süresine eklenir." - msgid "Ramming parameters" msgstr "Sıkıştırma parametreleri" @@ -10935,23 +13304,14 @@ msgstr "" "Bu dize RammingDialog tarafından düzenlenir ve ramming'e özgü parametreleri " "içerir." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is added " -"to the total print time by the G-code time estimator." -msgstr "" -"Yazıcı ürün yazılımının (veya Çoklu Malzeme Ünitesi 2.0'ın) takım değişimi " -"sırasında (T kodu yürütülürken) filamenti boşaltma süresi. Bu süre, G kodu " -"süre tahmincisi tarafından toplam baskı süresine eklenir." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "Çoklu araç kurulumları için sıkıştırmayı etkinleştirin" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Çok takımlı yazıcı kullanırken sıkıştırma gerçekleştirin (yani Yazıcı " "Ayarları'ndaki 'Tek Ekstruder Çoklu Malzeme' işaretli olmadığında). " @@ -10959,53 +13319,66 @@ msgstr "" "filament hızla ekstrude edilir. Bu seçenek yalnızca silme kulesi " "etkinleştirildiğinde kullanılır." -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "Çoklu araç sıkıştırma hacmi" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Takım değişiminden önce sıkıştırılacak hacim." -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "Çoklu araç sıkıştırma akışı" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "Araç değişiminden önce filamenti sıkıştırmak için kullanılan akış." msgid "Density" msgstr "Yoğunluk" -msgid "Filament density. For statistics only" -msgstr "Filament yoğunluğu. Yalnızca istatistikler için" +msgid "Filament density. For statistics only." +msgstr "Filament yoğunluğu. Yalnızca istatistikler için." -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" -msgstr "Filament malzeme türü" +msgid "The material type of filament." +msgstr "Filament malzeme türü." msgid "Soluble material" msgstr "Çözünür malzeme" -msgid "Soluble material is commonly used to print support and support interface" +msgid "" +"Soluble material is commonly used to print supports and support interfaces." msgstr "" "Çözünür malzeme genellikle destek ve destek arayüzünü yazdırmak için " -"kullanılır" +"kullanılır." + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" msgid "Support material" msgstr "Destek malzemesi" -msgid "Support material is commonly used to print support and support interface" +msgid "" +"Support material is commonly used to print supports and support interfaces." msgstr "" "Destek malzemesi yaygın olarak destek ve destek arayüzünü yazdırmak için " -"kullanılır" +"kullanılır." + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" msgid "Softening temperature" msgstr "Yumuşama sıcaklığı" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Filament bu sıcaklıkta yumuşar, bu nedenle yatak sıcaklığı bununla eşit veya " "daha yüksekse, tıkanmaları önlemek için ön kapağı açmanız ve/veya üst camı " @@ -11014,8 +13387,8 @@ msgstr "" msgid "Price" msgstr "Fiyat" -msgid "Filament price. For statistics only" -msgstr "Filament fiyatı. Yalnızca istatistikler için" +msgid "Filament price. For statistics only." +msgstr "Filament fiyatı. Yalnızca istatistikler için." msgid "money/kg" msgstr "ücret/kg" @@ -11023,8 +13396,8 @@ msgstr "ücret/kg" msgid "Vendor" msgstr "Satıcı" -msgid "Vendor of filament. For show only" -msgstr "Filament satıcısı. Yalnızca gösteri için" +msgid "Vendor of filament. For show only." +msgstr "Filament satıcısı. Yalnızca gösteri için." msgid "(Undefined)" msgstr "(Tanımsız)" @@ -11034,24 +13407,18 @@ msgstr "Seyrek dolgu yönü" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Hattın başlangıcını veya ana yönünü kontrol eden seyrek dolgu deseni açısı" +"Hattın başlangıcını veya ana yönünü kontrol eden seyrek dolgu deseni açısı." msgid "Solid infill direction" msgstr "Katı dolgu yönü" msgid "" -"Angle for solid infill pattern, which controls the start or main direction of " -"line" +"Angle for solid infill pattern, which controls the start or main direction " +"of line." msgstr "" -"Hattın başlangıcını veya ana yönünü kontrol eden katı dolgu deseni açısı" - -msgid "Rotate solid infill direction" -msgstr "Katı dolgu yönünü döndür" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Katı dolgu yönünü her katman için 90° döndürün." +"Hattın başlangıcını veya ana yönünü kontrol eden katı dolgu deseni açısı." msgid "Sparse infill density" msgstr "Dolgu yoğunluğu" @@ -11059,40 +13426,79 @@ msgstr "Dolgu yoğunluğu" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" -"İç seyrek dolgunun yoğunluğu, %100 tüm seyrek dolguyu katı dolguya dönüştürür " -"ve iç katı dolgu modeli kullanılacaktır" +"İç seyrek dolgunun yoğunluğu, %100 tüm seyrek dolguyu katı dolguya " +"dönüştürür ve iç katı dolgu modeli kullanılacaktır." + +msgid "Align infill direction to model" +msgstr "Dolgu yönünü modele hizalayın" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Dolgu ve yüzey dolgu yönlerini, modelin yapı plakasındaki yönünü takip " +"edecek şekilde hizalar. Etkinleştirildiğinde, dolgu yönleri optimum " +"dayanıklılık özelliklerini korumak için modelle birlikte döner." + +msgid "Insert solid layers" +msgstr "Katı katmanlar ekle" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Belirli katmanlara katı dolgu ekleyin. Her N’inci katmana eklemek için N " +"kullanın, her N katmanda K ardışık katı katman eklemek için N#K kullanın (K " +"isteğe bağlıdır, örn. '5#' = '5#1'), veya belirli katmanlara eklemek için " +"virgülle ayrılmış bir liste kullanın (örn. 1,7,9). Katman numaraları 1’den " +"başlar." + +msgid "Fill Multiline" +msgstr "Çok çizgili dolgu" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "" +"Dolgu deseni tarafından destekleniyorsa, dolgu deseni için birden fazla " +"çizgi kullanılması." msgid "Sparse infill pattern" msgstr "Dolgu deseni" -msgid "Line pattern for internal sparse infill" -msgstr "İç dolgu deseni" +msgid "Line pattern for internal sparse infill." +msgstr "İç dolgu deseni." -msgid "Grid" -msgstr "Kafes" +msgid "Zig Zag" +msgstr "Zig zag" + +msgid "Cross Zag" +msgstr "Cross zag" + +msgid "Locked Zag" +msgstr "Locked zag" msgid "Line" msgstr "Çizgi" -msgid "Cubic" -msgstr "Kübik" +msgid "Grid" +msgstr "Kafes" msgid "Tri-hexagon" msgstr "Üç altıgen" -msgid "Gyroid" -msgstr "Jiroid" - -msgid "Honeycomb" -msgstr "Bal peteği" +msgid "Cubic" +msgstr "Kübik" msgid "Adaptive Cubic" msgstr "Uyarlanabilir kübik" -msgid "3D Honeycomb" -msgstr "3D petek" +msgid "Quarter Cubic" +msgstr "Çeyrek küp" msgid "Support Cubic" msgstr "Destek kübik" @@ -11100,9 +13506,55 @@ msgstr "Destek kübik" msgid "Lightning" msgstr "Yıldırım" +msgid "Honeycomb" +msgstr "Petek" + +msgid "3D Honeycomb" +msgstr "3D petek" + +msgid "Lateral Honeycomb" +msgstr "Yanal petek" + +msgid "Lateral Lattice" +msgstr "Yanal kafes" + msgid "Cross Hatch" msgstr "Çapraz çizgi" +msgid "TPMS-D" +msgstr "Tpms-d" + +msgid "TPMS-FK" +msgstr "Tpms-fk" + +msgid "Gyroid" +msgstr "Jiroid" + +msgid "Lateral lattice angle 1" +msgstr "Kafes açısı 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"İlk 2 boyutlu kafes elemanları grubunun Z yönündeki açısı. Sıfır dikeydir." + +msgid "Lateral lattice angle 2" +msgstr "Kafes açısı 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"İkinci 2 boyutlu kafes elemanları grubunun Z yönündeki açısı. Sıfır dikeydir." + +msgid "Infill overhang angle" +msgstr "Dolgu çıkıntı açısı" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "Dolgu açılı çizgilerinin açısı 60° ise saf petek görünümü elde edilir." + msgid "Sparse infill anchor length" msgstr "Dolgu uzunluğu" @@ -11110,22 +13562,23 @@ msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. Snapmaker Orca tries to connect two " -"close infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than infill_anchor_max is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to this parameter, but no longer than anchor_length_max. \n" +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than infill_anchor_max is found, the infill line is " +"connected to a perimeter segment at just one side and the length of the " +"perimeter segment taken is limited to this parameter, but no longer than " +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" "Bir dolgu hattını, ek bir çevrenin kısa bir bölümü ile bir iç çevreye " -"bağlayın. Yüzde olarak ifade edilirse (örnek: %15) dolgu ekstrüzyon genişliği " -"üzerinden hesaplanır. Snapmaker Orca iki yakın dolgu hattını kısa bir çevre " -"segmentine bağlamaya çalışıyor. infill_anchor_max'tan daha kısa böyle bir " -"çevre segmenti bulunamazsa, dolgu hattı yalnızca bir taraftaki bir çevre " +"bağlayın. Yüzde olarak ifade edilirse (örnek: %15) dolgu ekstrüzyon " +"genişliği üzerinden hesaplanır. Snapmaker Orca iki yakın dolgu hattını kısa bir " +"çevre segmentine bağlamaya çalışıyor. infill_anchor_max'tan daha kısa böyle " +"bir çevre segmenti bulunamazsa, dolgu hattı yalnızca bir taraftaki bir çevre " "segmentine bağlanır ve alınan çevre segmentinin uzunluğu bu parametreyle " "sınırlıdır, ancak çapa_uzunluk_max'tan uzun olamaz.\n" -"Tek bir dolgu hattına bağlı sabitleme çevrelerini devre dışı bırakmak için bu " -"parametreyi sıfıra ayarlayın." +"Tek bir dolgu hattına bağlı sabitleme çevrelerini devre dışı bırakmak için " +"bu parametreyi sıfıra ayarlayın." msgid "0 (no open anchors)" msgstr "0 (açık bağlantı yok)" @@ -11140,52 +13593,53 @@ msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. Snapmaker Orca tries to connect two " -"close infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than this parameter is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to infill_anchor, but no longer than this parameter. \n" +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than this parameter is found, the infill line is connected " +"to a perimeter segment at just one side and the length of the perimeter " +"segment taken is limited to infill_anchor, but no longer than this " +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" "Bir dolgu hattını, ek bir çevrenin kısa bir bölümü ile bir iç çevreye " -"bağlayın. Yüzde olarak ifade edilirse (örnek: %15) dolgu ekstrüzyon genişliği " -"üzerinden hesaplanır. Snapmaker Orca iki yakın dolgu hattını kısa bir çevre " -"segmentine bağlamaya çalışıyor. Bu parametreden daha kısa bir çevre segmenti " -"bulunamazsa, dolgu hattı sadece bir kenardaki bir çevre segmentine bağlanır " -"ve alınan çevre segmentinin uzunluğu infill_anchor ile sınırlıdır ancak bu " -"parametreden daha uzun olamaz.\n" -"0'a ayarlanırsa dolgu bağlantısı için eski algoritma kullanılacaktır; 1000 ve " -"0 ile aynı sonucu oluşturmalıdır." +"bağlayın. Yüzde olarak ifade edilirse (örnek: %15) dolgu ekstrüzyon " +"genişliği üzerinden hesaplanır. Snapmaker Orca iki yakın dolgu hattını kısa bir " +"çevre segmentine bağlamaya çalışıyor. Bu parametreden daha kısa bir çevre " +"segmenti bulunamazsa, dolgu hattı sadece bir kenardaki bir çevre segmentine " +"bağlanır ve alınan çevre segmentinin uzunluğu infill_anchor ile sınırlıdır " +"ancak bu parametreden daha uzun olamaz.\n" +"0'a ayarlanırsa dolgu bağlantısı için eski algoritma kullanılacaktır; 1000 " +"ve 0 ile aynı sonucu oluşturmalıdır." msgid "0 (Simple connect)" msgstr "0 (Basit bağlantı)" -msgid "Acceleration of outer walls" -msgstr "Dış duvarların hızlandırılması" +msgid "Acceleration of outer walls." +msgstr "Dış duvarların hızlandırılması." -msgid "Acceleration of inner walls" -msgstr "İç duvarların hızlandırılması" +msgid "Acceleration of inner walls." +msgstr "İç duvarların hızlandırılması." -msgid "Acceleration of travel moves" -msgstr "Seyahat hareketlerinin hızlandırılması" +msgid "Acceleration of travel moves." +msgstr "Seyahat hareketlerinin hızlandırılması." msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" -"Üst yüzey dolgusunun hızlandırılması. Daha düşük bir değerin kullanılması üst " -"yüzey kalitesini iyileştirebilir" +"Üst yüzey dolgusunun hızlandırılması. Daha düşük bir değerin kullanılması " +"üst yüzey kalitesini iyileştirebilir." -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" -"Dış duvarın hızlanması. Daha düşük bir değer kullanmak kaliteyi artırabilir" +"Dış duvarın hızlanması. Daha düşük bir değer kullanmak kaliteyi artırabilir." msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." msgstr "" -"Köprülerin hızlandırılması. Değer yüzde olarak ifade edilirse (örn. %50), dış " -"duvar ivmesine göre hesaplanacaktır." +"Köprülerin hızlandırılması. Değer yüzde olarak ifade edilirse (örn. %50), " +"dış duvar ivmesine göre hesaplanacaktır." msgid "mm/s² or %" msgstr "mm/s² veya %" @@ -11207,42 +13661,55 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" "Başlangıç katmanının hızlandırılması. Daha düşük bir değerin kullanılması " -"baskı plakası yapışkanlığını iyileştirebilir" +"baskı plakası yapışkanlığını iyileştirebilir." msgid "Enable accel_to_decel" msgstr "Accel_to_decel'i etkinleştir" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "Klipper'ın max_accel_to_decel'i otomatik olarak ayarlanacak" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "Klipper'ın max_accel_to_decel'i otomatik olarak ayarlanacak." msgid "accel_to_decel" msgstr "Accel_to_decel" #, c-format, boost-format -msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +msgid "" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "" -"Klipper'ın max_accel_to_decel değeri ivmenin bu %%'sine göre ayarlanacak" +"Klipper'ın max_accel_to_decel değeri ivmenin bu %%'sine göre ayarlanacak." -msgid "Jerk of outer walls" -msgstr "Dış duvar JERK değeri" +msgid "Default jerk." +msgstr "Varsayılan sarsıntı." -msgid "Jerk of inner walls" -msgstr "İç duvarlar JERK değeri" +msgid "Junction Deviation" +msgstr "Köşe sapması" -msgid "Jerk for top surface" -msgstr "Üst yüzey için JERK değeri" +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" +"Marlin Firmware Köşe Sapması (geleneksel XY Sarsıntı ayarının yerini alır)" -msgid "Jerk for infill" -msgstr "Dolgu için JERK değeri" +msgid "Jerk of outer walls." +msgstr "Dış duvar JERK değeri." -msgid "Jerk for initial layer" -msgstr "İlk katman için JERK değeri" +msgid "Jerk of inner walls." +msgstr "İç duvarlar JERK değeri." -msgid "Jerk for travel" -msgstr "Seyahat için JERK değeri" +msgid "Jerk for top surface." +msgstr "Üst yüzey için JERK değeri." + +msgid "Jerk for infill." +msgstr "Dolgu için JERK değeri." + +msgid "Jerk for initial layer." +msgstr "İlk katman için JERK değeri." + +msgid "Jerk for travel." +msgstr "Seyahat için JERK değeri." msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " @@ -11255,26 +13722,26 @@ msgid "Initial layer height" msgstr "Başlangıç katman yüksekliği" msgid "" -"Height of initial layer. Making initial layer height to be thick slightly can " -"improve build plate adhension" +"Height of initial layer. Making initial layer height to be thick slightly " +"can improve build plate adhesion." msgstr "" "İlk katmanın yüksekliği. İlk katman yüksekliğini biraz kalın yapmak, baskı " -"plakasının yapışmasını iyileştirebilir" +"plakasının yapışmasını iyileştirebilir." -msgid "Speed of initial layer except the solid infill part" -msgstr "Katı dolgu kısmı dışındaki ilk katmanın hızı" +msgid "Speed of initial layer except the solid infill part." +msgstr "Katı dolgu kısmı dışındaki ilk katmanın hızı." msgid "Initial layer infill" msgstr "Başlangıç katman dolgusu" -msgid "Speed of solid infill part of initial layer" -msgstr "İlk katmanın katı dolgu kısmının hızı" +msgid "Speed of solid infill part of initial layer." +msgstr "İlk katmanın katı dolgu kısmının hızı." msgid "Initial layer travel speed" msgstr "İlk katman seyahat hızı" -msgid "Travel speed of initial layer" -msgstr "İlk katman seyahat hızı" +msgid "Travel speed of initial layer." +msgstr "İlk katman seyahat hızı." msgid "Number of slow layers" msgstr "Yavaş katman sayısı" @@ -11289,8 +13756,8 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "İlk katman nozul sıcaklığı" -msgid "Nozzle temperature to print initial layer when using this filament" -msgstr "Bu filamenti kullanırken ilk katmanı yazdırmak için nozul sıcaklığı" +msgid "Nozzle temperature for printing initial layer when using this filament." +msgstr "Bu filamenti kullanırken ilk katmanı yazdırmak için nozul sıcaklığı." msgid "Full fan speed at layer" msgstr "Maksimum fan hızı" @@ -11304,9 +13771,9 @@ msgid "" msgstr "" "Fan hızı, \"close_fan_the_first_x_layers\" katmanında sıfırdan " "\"ful_fan_speed_layer\" katmanında maksimuma doğrusal olarak artırılacaktır. " -"\"full_fan_speed_layer\", \"close_fan_the_first_x_layers\" değerinden düşükse " -"göz ardı edilecektir; bu durumda fan, \"close_fan_the_first_x_layers\" + 1 " -"katmanında izin verilen maksimum hızda çalışacaktır." +"\"full_fan_speed_layer\", \"close_fan_the_first_x_layers\" değerinden " +"düşükse göz ardı edilecektir; bu durumda fan, \"close_fan_the_first_x_layers" +"\" + 1 katmanında izin verilen maksimum hızda çalışacaktır." msgid "layer" msgstr "katman" @@ -11315,22 +13782,59 @@ msgid "Support interface fan speed" msgstr "Destekler için fan hızı" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." msgstr "" -"Bu fan hızı, yüksek fan hızıyla bağlarını zayıflatabilmek için tüm destek " -"arayüzlerinde uygulanır.\n" -"Bu geçersiz kılmayı devre dışı bırakmak için -1'e ayarlayın.\n" -"Yalnızca devre dışı_fan_first_layers tarafından geçersiz kılınabilir." +"Bu kısım soğutma fanı hızı, destek arayüzlerini yazdırırken uygulanır. Bu " +"parametrenin normal hızdan daha yüksek bir değere ayarlanması, destekler ile " +"desteklenen parça arasındaki katman bağlama gücünü azaltarak bunların " +"ayrılmasını kolaylaştırır.\n" +"Devre dışı bırakmak için -1’e ayarlayın.\n" +"Bu ayar, ilk katman fan hızı kapalı ayarı tarafından geçersiz kılınır." + +msgid "Internal bridges fan speed" +msgstr "İç köprü fan hızı" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Tüm iç köprüler için kullanılan parça soğutma fanı hızı. Bunun yerine " +"çıkıntılı fan hızı ayarlarını kullanmak için -1’e ayarlayın.\n" +"\n" +"Normal fan hızınızla karşılaştırıldığında iç köprü fan hızını azaltmak, " +"geniş bir yüzeye uzun süre uygulanan aşırı soğutma nedeniyle parçanın " +"bükülmesinin azaltılmasına yardımcı olabilir." + +msgid "Ironing fan speed" +msgstr "Ütüleme fan hızı" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Bu parça soğutma fanı hızı, ütüleme sırasında uygulanır. Bu parametrenin " +"normalden daha düşük bir hıza ayarlanması, düşük hacimsel akış hızı " +"nedeniyle nozul tıkanıklığını azaltarak arayüzü daha pürüzsüz hale getirir.\n" +"\n" +"Devre dışı bırakmak için -1 olarak ayarlayın." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Duvara baskı yaparken rastgele titreme, böylece yüzeyin pürüzlü bir görünüme " -"sahip olması. Bu ayar bulanık konumu kontrol eder" +"sahip olması. Bu ayar pütürlü konumu kontrol eder." msgid "Contour" msgstr "Kontur" @@ -11342,29 +13846,152 @@ msgid "All walls" msgstr "Tüm duvarlar" msgid "Fuzzy skin thickness" -msgstr "Bulanık kaplama kalınlığı" +msgstr "Pütürlü yüzey kalınlığı" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "Titremenin gerçekleşeceği genişlik. Dış duvar çizgi genişliğinin altında " -"olması sakıncalıdır" +"olması sakıncalıdır." msgid "Fuzzy skin point distance" -msgstr "Bulanık kaplama noktası mesafesi" +msgstr "Pütürlü yüzey nokta mesafesi" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" -"Her çizgi parçasına eklenen rastgele noktalar arasındaki ortalama mesafe" +"Her çizgi parçasına eklenen rastgele noktalar arasındaki ortalama mesafe." msgid "Apply fuzzy skin to first layer" -msgstr "Bulanık cildi ilk katmana uygulayın" +msgstr "Pütürlü yüzeyi ilk katmana uygula" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "İlk katmana bulanık cilt uygulanıp uygulanmayacağı" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "İlk katmana pütürlü yüzey uygulanıp uygulanmayacağı." + +msgid "Fuzzy skin generator mode" +msgstr "Pütürlü yüzey oluşturma modu" + +#, fuzzy, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Pütürlü yüzey oluşturma modu. Sadece Arachne ile çalışır!\n" +"Yer Değiştirme: Desen, nozülün orijinal yoldan yana kaydırılmasıyla " +"oluşturulduğu klasik mod.\n" +"Ekstrüzyon: Desenin ekstrüde edilen plastik miktarına göre oluşturulduğu " +"mod. Bu, nozül sarsıntısı olmadan pürüzsüz bir desen veren hızlı ve düz bir " +"algoritmadır. Ancak, tüm dizilimde gevşek duvarlar oluşturmak için daha " +"kullanışlıdır.\n" +"Birleşik: Eklem modu [Yer Değiştirme] + [Ekstrüzyon]. Duvarların görünümü " +"[Yer Değiştirme] Moduna benzer, ancak çevreler arasında gözenek bırakmaz.\n" +"\n" +"Dikkat! [Ekstrüzyon] ve [Birleşik] modları yalnızca fuzzy_skin_thickness " +"parametresini çalıştırır, yazdırılan ilmeğin kalınlığından daha fazla " +"olmamalıdır. Aynı zamanda, belirli bir katman için ekstrüzyon genişliği de " +"belirli bir seviyenin altında olmamalıdır. Genellikle katman yüksekliğinin " +"%15-25'ine eşittir. Bu nedenle, 0,4 mm çevre genişliği ve 0,2 mm katman " +"yüksekliğine sahip maksimum bulanık deri kalınlığı 0,4-(0,2*0,25)=±0,35 mm " +"olacaktır! Bundan daha yüksek bir parametre girerseniz, Flow::spacing() " +"hatası görüntülenir ve model dilimlenmez. Bu hata tekrarlanana kadar bu " +"sayıyı seçebilirsiniz." + +msgid "Displacement" +msgstr "Yer değiştirme" + +msgid "Extrusion" +msgstr "Ekstrüzyon" + +msgid "Combined" +msgstr "Birleşik" + +msgid "Fuzzy skin noise type" +msgstr "Pütürlü yüzey gürültü türü" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Pütürlü yüzey oluşumu için kullanılacak gürültü türü.\n" +"Klasik: Klasik tek tip rastgele gürültü.\n" +"Perlin: Daha tutarlı bir doku veren Perlin gürültüsü.\n" +"Billow: Perlin gürültüsüne benzer, ancak daha topaklanır.\n" +"Ridged multifractal: Keskin, pürüzlü özelliklere sahip çıkıntılı gürültü. " +"Mermer benzeri dokular oluşturur.\n" +"Voronoi: Yüzeyi voronoi hücrelerine böler ve her birini rastgele miktarda " +"yer değiştirir. Patchwork dokusu oluşturur." + +msgid "Classic" +msgstr "Klasik" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Ridged multifractal" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Pütürlü yüzey özellik boyutu" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Tutarlı gürültü özelliklerinin mm cinsinden taban boyutu. Daha yüksek " +"değerler daha büyük özelliklerle sonuçlanacaktır." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Pütürlü yüzey gürültü oktavları" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Kullanılacak tutarlı gürültünün oktav sayısı. Daha yüksek değerler " +"gürültünün ayrıntısını artırır ancak aynı zamanda hesaplama süresini de " +"artırır." + +msgid "Fuzzy skin noise persistence" +msgstr "Pütürlü yüzey gürültü kalıcılığı" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Tutarlı gürültünün daha yüksek oktavları için bozulma oranı. Daha düşük " +"değerler daha yumuşak gürültüye neden olur." msgid "Filter out tiny gaps" msgstr "Küçük boşlukları filtrele" @@ -11372,21 +13999,27 @@ msgstr "Küçük boşlukları filtrele" msgid "Layers and Perimeters" msgstr "Katmanlar ve Çevreler" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Belirtilen eşikten daha küçük boşlukları filtrele" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Belirtilen eşikten (mm cinsinden) daha küçük bir uzunluğa sahip boşluk " +"dolgusunu yazdırmayın. Bu ayar üst, alt ve katı dolgu için ve klasik çevre " +"oluşturucu kullanılıyorsa duvar boşluğu dolgusu için geçerlidir." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Boşluk doldurma hızı. Boşluk genellikle düzensiz çizgi genişliğine sahiptir " -"ve daha yavaş yazdırılmalıdır" +"ve daha yavaş yazdırılmalıdır." msgid "Precise Z height" msgstr "Hassas z yüksekliği" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11400,16 +14033,16 @@ msgstr "Ark" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. Klipper " -"does not benefit from arc commands as these are split again into line " -"segments by the firmware. This results in a reduction in surface quality as " -"line segments are converted to arcs by the slicer and then back to line " -"segments by the firmware." +"Note: For Klipper machines, this option is recommended to be disabled. " +"Klipper does not benefit from arc commands as these are split again into " +"line segments by the firmware. This results in a reduction in surface " +"quality as line segments are converted to arcs by the slicer and then back " +"to line segments by the firmware." msgstr "" "G2 ve G3 hareketlerine sahip bir G kodu dosyası elde etmek için bunu " -"etkinleştirin. Montaj toleransı çözünürlükle aynıdır. \n" +"etkinleştirin. Montaj toleransı çözünürlükle aynıdır.\n" "\n" "Not: Klipper makineler için bu seçeneğin devre dışı bırakılması önerilir. " "Klipper, yazılım tarafından tekrar çizgi bölümlerine bölündüğü için yay " @@ -11421,30 +14054,31 @@ msgstr "" msgid "Add line number" msgstr "Satır numarası ekle" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Her G Kodu satırının başına satır numarası (Nx) eklemek için bunu " -"etkinleştirin" +"etkinleştirin." msgid "Scan first layer" msgstr "İlk katmanı tara" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Yazıcıdaki kameranın ilk katmanın kalitesini kontrol etmesini sağlamak için " -"bunu etkinleştirin" +"bunu etkinleştirin." msgid "Nozzle type" msgstr "Nozul tipi" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" -"Nozulnin metalik malzemesi. Bu, nozulun aşınma direncini ve ne tür filamentin " -"basılabileceğini belirler" +"Nozulnin metalik malzemesi. Bu, nozulun aşınma direncini ve ne tür " +"filamentin basılabileceğini belirler." msgid "Undefine" msgstr "Tanımsız" @@ -11455,6 +14089,9 @@ msgstr "Güçlendirilmiş çelik" msgid "Stainless steel" msgstr "Paslanmaz çelik" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Pirinç" @@ -11474,8 +14111,8 @@ msgstr "sıcak rulo" msgid "Printer structure" msgstr "Yazıcı yapısı" -msgid "The physical arrangement and components of a printing device" -msgstr "Yazıcının fiziksel düzenlemesi ve bileşenleri" +msgid "The physical arrangement and components of a printing device." +msgstr "Yazıcının fiziksel düzenlemesi ve bileşenleri." msgid "CoreXY" msgstr "CoreXY" @@ -11496,8 +14133,8 @@ msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "Yatak şekline göre [0,1] aralığında en iyi otomatik düzenleme konumu." msgid "" -"Enable this option if machine has auxiliary part cooling fan. G-code command: " -"M106 P2 S(0-255)." +"Enable this option if machine has auxiliary part cooling fan. G-code " +"command: M106 P2 S(0-255)." msgstr "" "Makinede yardımcı parça soğutma fanı varsa bu seçeneği etkinleştirin. G-code " "komut: M106 P2 S(0-255)." @@ -11507,10 +14144,10 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Fanı hedef başlangıç zamanından bu kadar saniye önce başlatın (kesirli " @@ -11540,15 +14177,15 @@ msgid "" msgstr "" "Soğutma fanını başlatmak için hedef hıza düşmeden önce bu süre boyunca " "maksimum fan hızı komutunu verin.\n" -"Bu, düşük PWM/gücün fanın durma noktasından dönmeye başlaması veya fanın daha " -"hızlı hızlanması için yetersiz olabileceği fanlar için kullanışlıdır.\n" +"Bu, düşük PWM/gücün fanın durma noktasından dönmeye başlaması veya fanın " +"daha hızlı hızlanması için yetersiz olabileceği fanlar için kullanışlıdır.\n" "Devre dışı bırakmak için 0'a ayarlayın." msgid "Time cost" msgstr "Zaman maliyeti" -msgid "The printer cost per hour" -msgstr "Yazıcı saat başına maliyeti" +msgid "The printer cost per hour." +msgstr "Yazıcı saat başına maliyeti." msgid "money/h" msgstr "ücret/sa" @@ -11575,10 +14212,10 @@ msgstr "" "G-code komut: M106 P3 S(0-255)" msgid "G-code flavor" -msgstr "G-Kod Uyumu" +msgstr "G-code türü" -msgid "What kind of gcode the printer is compatible with" -msgstr "Yazıcının ne tür bir gcode ile uyumlu olduğu" +msgid "What kind of G-code the printer is compatible with." +msgstr "Yazıcının ne tür bir gcode ile uyumlu olduğu." msgid "Klipper" msgstr "Klipper" @@ -11586,38 +14223,40 @@ msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Pelet modlu yazıcı" -msgid "Enable this option if your printer uses pellets instead of filaments" -msgstr "Yazıcınız filament yerine pellet kullanıyorsa bu seçeneği etkinleştirin" +msgid "Enable this option if your printer uses pellets instead of filaments." +msgstr "" +"Yazıcınız filament yerine pellet kullanıyorsa bu seçeneği etkinleştirin." msgid "Support multi bed types" -msgstr "Çoklu plaka" +msgstr "Çoklu plaka tiplerini destekle" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" -"Birden fazla plaka tipi kullanmak istiyorsanız bu seçeneği etkinleştirin" +"Birden fazla plaka tipi kullanmak istiyorsanız bu seçeneği etkinleştirin." msgid "Label objects" msgstr "Nesneleri etiketle" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " -"object they belong to, which is useful for the Octoprint CancelObject plugin. " -"This settings is NOT compatible with Single Extruder Multi Material setup and " -"Wipe into Object / Wipe into Infill." +"Enable this to add comments into the G-code labeling print moves with what " +"object they belong to, which is useful for the Octoprint CancelObject " +"plugin. This settings is NOT compatible with Single Extruder Multi Material " +"setup and Wipe into Object / Wipe into Infill." msgstr "" "G-Code etiketleme yazdırma hareketlerine ait oldukları nesneyle ilgili " "yorumlar eklemek için bunu etkinleştirin; bu, Octoprint CancelObject " -"eklentisi için kullanışlıdır. Bu ayarlar Tek Ekstruder Çoklu Malzeme kurulumu " -"ve Nesneye Temizleme / Dolguya Temizleme ile uyumlu DEĞİLDİR." +"eklentisi için kullanışlıdır. Bu ayarlar Tek Ekstruder Çoklu Malzeme " +"kurulumu ve Nesneye Temizleme / Dolguya Temizleme ile uyumlu DEĞİLDİR." msgid "Exclude objects" msgstr "Nesneleri hariç tut" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "G koduna EXCLUDE OBJECT komutunu eklemek için bu seçeneği etkinleştirin" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "" +"G koduna EXCLUDE OBJECT komutunu eklemek için bu seçeneği etkinleştirin." msgid "Verbose G-code" -msgstr "Ayrıntılı G kodu" +msgstr "Ayrıntılı G-code" msgid "" "Enable this to get a commented G-code file, with each line explained by a " @@ -11639,6 +14278,168 @@ msgstr "" "olarak birleştirerek birlikte yazdırın. Duvar hala orijinal katman " "yüksekliğinde basılmaktadır." +msgid "Infill shift step" +msgstr "Doldu kaydırma adımı" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Bu parametre, çapraz bir doku oluşturmak için her dolgu katmanına hafif bir " +"yer değiştirme ekler." + +msgid "Sparse infill rotation template" +msgstr "Seyrek dolgu döndürme şablonu" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Seyrek dolgu yönünü katman katman açı şablonuna göre döndürün. Virgülle " +"ayrılmış açıları girin (örn. '0,30,60,90'). Açılar katman sırasına göre " +"uygulanır ve liste sona erdiğinde tekrarlanır. Gelişmiş sözdizimi " +"desteklenir: '+5' her katmanda +5° döndürür; '+5#5' her 5 katmanda +5° " +"döndürür. Detaylar için Viki’ye bakın. Bir şablon ayarlandığında, standart " +"dolgu yönü ayarı yok sayılır. NOT: bazı dolgu desenleri (örn. Gyroid) kendi " +"döndürmesini kontrol eder; dikkatli kullanın" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Katı dolgu döndürme şablonu" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Bu parametre, belirtilen şablona göre her katmana katı dolgu yönünün " +"döndürülmesini ekler. Şablon, derece cinsinden virgülle ayrılmış bir açı " +"listesidir (örneğin, '0,90'). İlk açı ilk katmana, ikinci açı ikinci katmana " +"uygulanır ve bu şekilde devam eder. Açılardan daha fazla katman varsa, " +"açılar tekrarlanır. Tüm katı dolgu desenlerinin döndürmeyi desteklemediğini " +"unutmayın." + +msgid "Skeleton infill density" +msgstr "İskelet dolgu yoğunluğu" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"üzeyden belirli bir derinlik çıkarıldıktan sonra model konturunda kalan " +"kısma 'iskelet' denir. Bu parametre, bu bölümün yoğunluğunu ayarlamak için " +"kullanılır. İki bölge aynı seyrek dolgu ayarlarına sahip fakat farklı " +"iskelet yoğunluklarına sahipse, iskelet alanları üst üste binen bölümler " +"oluşturabilir. Varsayılan değer, dolgu yoğunluğu ile aynıdır." + +msgid "Skin infill density" +msgstr "Yüzey dolgu yoğunluğu" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"Modelin dış yüzeyinin belirli bir derinlik aralığındaki kısmına 'cilt' " +"denir. Bu parametre, bu bölümün yoğunluğunu ayarlamak için kullanılır. İki " +"bölge aynı seyrek dolgu ayarlarına sahip fakat farklı cilt yoğunluklarına " +"sahipse, bu alan iki ayrı bölgeye ayrılmaz. Varsayılan değer, dolgu " +"yoğunluğu ile aynıdır." + +msgid "Skin infill depth" +msgstr "Yüzey dolgu derinliği" + +msgid "The parameter sets the depth of skin." +msgstr "Parametre, yüzeyin derinliğini ayarlar." + +msgid "Infill lock depth" +msgstr "Dolgu kilit derinliği" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" +"Parametre, iç kısım ile dış yüzey arasındaki örtüşme derinliğini ayarlar." + +msgid "Skin line width" +msgstr "Yüzey çizgi genişliği" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Seçili yüzey yollarının çizgi genişliğini ayarlayın." + +msgid "Skeleton line width" +msgstr "İskelet çizgi genişliği" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Seçili iskelet yollarının çizgi genişliğini ayarlayın." + +msgid "Symmetric infill Y axis" +msgstr "Simetrik dolgu Y ekseni" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Modelin Y ekseni etrafında simetrik iki parçası varsa ve bu parçaların " +"simetrik dokulara sahip olmasını istiyorsanız, lütfen parçalardan birinde bu " +"seçeneğe tıklayın." + +msgid "Infill combination - Max layer height" +msgstr "Dolgu kombinasyonu - Maksimum katman yüksekliği" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Birleşik seyrek dolgu için maksimum katman yüksekliği.\n" +"\n" +"Nozül çapını kullanmak için (baskı süresinde maksimum azalma için) %0 veya " +"%100’e veya seyrek dolgu mukavemetini maksimuma çıkarmak için ~%80’lik bir " +"değere ayarlayın.\n" +"\n" +"Dolgunun birleştirildiği katmanların sayısı, bu değerin katman yüksekliğine " +"bölünmesiyle elde edilir ve en yakın ondalık sayıya yuvarlanır.\n" +"\n" +"Mutlak mm değerlerini (örn. 0,4 mm’lik nozul için 0,32 mm) veya % " +"değerlerini (örn. %80) kullanın. Bu değer nozul çapından büyük olmamalıdır." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "İç seyrek dolguyu yazdırmak için filament." @@ -11654,10 +14455,10 @@ msgstr "Dolgu/Duvar örtüşmesi" #, no-c-format, no-boost-format msgid "" -"Infill area is enlarged slightly to overlap with wall for better bonding. The " -"percentage value is relative to line width of sparse infill. Set this value " -"to ~10-15% to minimize potential over extrusion and accumulation of material " -"resulting in rough top surfaces." +"Infill area is enlarged slightly to overlap with wall for better bonding. " +"The percentage value is relative to line width of sparse infill. Set this " +"value to ~10-15% to minimize potential over extrusion and accumulation of " +"material resulting in rough top surfaces." msgstr "" "Daha iyi yapışma için dolgu alanı duvarla örtüşecek şekilde hafifçe " "genişletilir. Yüzde değeri seyrek dolgunun çizgi genişliğine göredir. Aşırı " @@ -11670,31 +14471,37 @@ msgstr "Üst/Alt katı dolgu/Duvar örtüşmesi" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " -"bonding and to minimize the appearance of pinholes where the top infill meets " -"the walls. A value of 25-30% is a good starting point, minimising the " +"bonding and to minimize the appearance of pinholes where the top infill " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "Üst katı dolgu alanı, daha iyi yapışma sağlamak ve üst dolgunun duvarlarla " "buluştuğu yerde küçük deliklerin görünümünü en aza indirmek için duvarla üst " "üste gelecek şekilde hafifçe genişletilir. %25-30’luk bir değer, iğne " -"deliklerinin görünümünü en aza indiren iyi bir başlangıç ​​noktasıdır. Yüzde " -"değeri seyrek dolgunun çizgi genişliğine göredir" +"deliklerinin görünümünü en aza indiren iyi bir başlangıç noktasıdır. Yüzde " +"değeri seyrek dolgunun çizgi genişliğine göredir." -msgid "Speed of internal sparse infill" -msgstr "İç seyrek dolgunun hızı" +msgid "Speed of internal sparse infill." +msgstr "İç seyrek dolgunun hızı." + +msgid "Inherits profile" +msgstr "Miras profil" + +msgid "Name of parent profile." +msgstr "Ebeveyn profilinin adı." msgid "Interface shells" msgstr "Arayüz kabukları" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual soluble " -"support material" +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." msgstr "" "Bitişik malzemeler/hacimler arasında katı kabuk oluşumunu zorlayın. Yarı " -"saydam malzemelerle veya elle çözülebilen destek malzemesiyle çoklu ekstruder " -"baskıları için kullanışlıdır" +"saydam malzemelerle veya elle çözülebilen destek malzemesiyle çoklu " +"ekstruder baskıları için kullanışlıdır." msgid "Maximum width of a segmented region" msgstr "Bölümlere ayrılmış bir bölgenin maksimum genişliği" @@ -11707,13 +14514,20 @@ msgstr "" msgid "Interlocking depth of a segmented region" msgstr "Bölümlere ayrılmış bir bölgenin birbirine kenetlenen derinliği" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Bölümlere ayrılmış bir bölgenin birbirine kenetlenen derinliği. 0 bu özelliği " -"devre dışı bırakır." +"Bölümlere ayrılmış bir bölgenin birbirine kenetlenen derinliği. " +"“mmu_segmented_region_max_width” sıfırsa veya " +"“mmu_segmented_region_interlocking_length”, “mmu_segmented_region_max_width” " +"değerinden büyükse göz ardı edilecektir. Sıfır bu özelliği devre dışı " +"bırakır." msgid "Use beam interlocking" -msgstr "Işın kilitlemeyi kullanın" +msgstr "Kiriş kilitlemeyi kullan" msgid "" "Generate interlocking beam structure at the locations where different " @@ -11725,7 +14539,7 @@ msgstr "" "filamentler arasındaki yapışmayı artırır." msgid "Interlocking beam width" -msgstr "Kilitli ışın genişliği" +msgstr "Kilitlemeli kiriş genişliği" msgid "The width of the interlocking structure beams." msgstr "Birbirine kenetlenen yapı kirişlerinin genişliği." @@ -11754,7 +14568,8 @@ msgid "" "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" "Hücrelerde ölçülen, birbirine kenetlenen yapıyı oluşturmak için filamentler " -"arasındaki sınırdan mesafe. Çok az hücre yapışmanın zayıf olmasına neden olur." +"arasındaki sınırdan mesafe. Çok az hücre yapışmanın zayıf olmasına neden " +"olur." msgid "Interlocking boundary avoidance" msgstr "Birbirine kenetlenen sınırdan kaçınma" @@ -11792,54 +14607,69 @@ msgstr "Tamamı katı katman" msgid "Ironing Pattern" msgstr "Ütüleme Deseni" -msgid "The pattern that will be used when ironing" -msgstr "Ütüleme işlemi sırasında kullanılacak desen" +msgid "The pattern that will be used when ironing." +msgstr "Ütüleme işlemi sırasında kullanılacak desen." msgid "Ironing flow" msgstr "Ütüleme akışı" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Ütüleme sırasında çıkacak malzeme miktarı. Normal katman yüksekliğindeki " -"akışa göre. Çok yüksek değer yüzeyde aşırı ekstrüzyona neden olur" +"akışa göre. Çok yüksek değer yüzeyde aşırı ekstrüzyona neden olur." msgid "Ironing line spacing" msgstr "Ütüleme çizgi aralığı" -msgid "The distance between the lines of ironing" -msgstr "Ütü çizgileri arasındaki mesafe" +msgid "The distance between the lines of ironing." +msgstr "Ütü çizgileri arasındaki mesafe." + +msgid "Ironing inset" +msgstr "Ütüleme boşluğu" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Kenarlardan korunacak mesafe. 0 değeri bunu nozül çapının yarısına ayarlar." msgid "Ironing speed" msgstr "Ütüleme hızı" -msgid "Print speed of ironing lines" -msgstr "Ütüleme çizgilerinin baskı hızı" +msgid "Print speed of ironing lines." +msgstr "Ütüleme çizgilerinin baskı hızı." -msgid "Ironing angle" -msgstr "Ütüleme açısı" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"Köşebent ütüleme işlemi yapılır. Negatif bir sayı bu işlevi devre dışı " -"bırakır ve varsayılan yöntemi kullanır." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "" +"Bu gcode kısmı, z kaldırma işleminden sonra her katman değişikliğinde " +"eklenir." + +msgid "Clumping detection G-code" msgstr "" -"Bu gcode kısmı, z kaldırma işleminden sonra her katman değişikliğinde eklenir" msgid "Supports silent mode" msgstr "Sessiz modu destekler" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Makinenin yazdırmak için daha düşük hızlanma kullandığı sessiz modu " -"destekleyip desteklemediği" +"destekleyip desteklemediği." msgid "Emit limits to G-code" msgstr "G-kod sınırları" @@ -11849,26 +14679,26 @@ msgstr "Yazıcı sınırları" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Etkinleştirilirse, makine sınırları G kodu dosyasına aktarılacaktır.\n" "G kodu tadı Klipper olarak ayarlandığında bu seçenek göz ardı edilecektir." msgid "" -"This G-code will be used as a code for the pause print. User can insert pause " -"G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Bu G kodu duraklatma yazdırması için bir kod olarak kullanılacaktır. " -"Kullanıcı gcode görüntüleyiciye duraklatma G kodunu ekleyebilir" +"Kullanıcı gcode görüntüleyiciye duraklatma G kodunu ekleyebilir." -msgid "This G-code will be used as a custom code" -msgstr "Bu G kodu özel kod olarak kullanılacak" +msgid "This G-code will be used as a custom code." +msgstr "Bu G kodu özel kod olarak kullanılacak." msgid "Small area flow compensation (beta)" msgstr "Küçük alan akış telafisi (beta)" -msgid "Enable flow compensation for small infill areas" -msgstr "Küçük dolgu alanları için akış telafisini etkinleştirin" +msgid "Enable flow compensation for small infill areas." +msgstr "Küçük dolgu alanları için akış telafisini etkinleştirin." msgid "Flow Compensation Model" msgstr "Akış telafisi modeli" @@ -11876,13 +14706,13 @@ msgstr "Akış telafisi modeli" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Akış Telafisi Modeli, küçük dolgu alanları için akışı ayarlamak için " -"kullanılır. Model, ekstrüzyon uzunluğu ve akış düzeltme faktörleri için " -"virgülle ayrılmış değer çifti olarak, her satıra bir tane olmak üzere " -"aşağıdaki formatta ifade edilir: \"1.234,5.678\"" +"Küçük dolgu alanlarında akışı ayarlamak için kullanılan Akış Telafi Modeli. " +"Model, ekstrüzyon uzunluğu ve akış düzeltme faktörü için virgülle ayrılmış " +"bir değer çifti olarak ifade edilir. Her çift, aşağıdaki formatta, noktalı " +"virgülle işaretlenmiş ayrı bir satırda yer alır: \"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "Maksimum hız X" @@ -11956,6 +14786,15 @@ msgstr "Z ekseninin maksimum sarsıntısı (Jerk)" msgid "Maximum jerk of the E axis" msgstr "E ekseninin maksimum sarsıntısı (Jerk)" +msgid "Maximum Junction Deviation" +msgstr "Maksimum köşe sapması" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Ekstrüzyon için minimum hız" @@ -11983,52 +14822,75 @@ msgstr "Geri çekilme için maksimum hızlanma (M204 R)" msgid "Maximum acceleration for travel" msgstr "Seyahat için maksimum hızlanma" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" -msgstr "Seyahat için maksimum ivme (M204 T), yalnızca Marlin 2 için geçerlidir" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "" +"Seyahat için maksimum ivme (M204 T), yalnızca Marlin 2 için geçerlidir." + +msgid "Resonance avoidance" +msgstr "Rezonans kaçınma" msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This is " -"the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." msgstr "" -"Otomatik soğutma etkinleştirildiğinde parça soğutma fanı hızı artırılabilir. " -"Bu, parça soğutma fanının maksimum hız sınırlamasıdır" +"Yazıcının rezonans bölgesinden kaçınmak için dış duvarın hızını düşürerek, " +"model yüzeyinde çınlama oluşması önlenir.\n" +"Çınlamayı test ederken lütfen bu seçeneği kapatın." + +msgid "Min" +msgstr "Minimum" + +msgid "Minimum speed of resonance avoidance." +msgstr "Rezonans önlemenin minimum hızı." msgid "Max" msgstr "Maksimum" +msgid "Maximum speed of resonance avoidance." +msgstr "Rezonans önlemenin maksimum hızı." + msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." msgstr "" -"Ekstruder için yazdırılabilir en büyük katman yüksekliği. Uyarlanabilir " +"Otomatik soğutma etkinleştirildiğinde parça soğutma fanı hızı artırılabilir. " +"Bu, parça soğutma fanının maksimum hız sınırlamasıdır." + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." +msgstr "" +"Ekstruder için yazdırılabilir en yüksek katman yüksekliği. Uyarlanabilir " "katman yüksekliği etkinleştirildiğinde maksimum katman yüksekliğini " -"sınırlamak için kullanılır" +"sınırlamak için kullanılır." msgid "Extrusion rate smoothing" msgstr "Ekstrüzyon hızını yumuşatma" msgid "" -"This parameter smooths out sudden extrusion rate changes that happen when the " -"printer transitions from printing a high flow (high speed/larger width) " +"This parameter smooths out sudden extrusion rate changes that happen when " +"the printer transitions from printing a high flow (high speed/larger width) " "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " -"Voron) this value is usually not needed. However it can provide some marginal " -"benefit in certain cases where feature speeds vary greatly. For example, when " -"there are aggressive slowdowns due to overhangs. In these cases a high value " -"of around 300-350mm3/s2 is recommended as this allows for just enough " -"smoothing to assist pressure advance achieve a smoother flow transition.\n" +"Voron) this value is usually not needed. However it can provide some " +"marginal benefit in certain cases where feature speeds vary greatly. For " +"example, when there are aggressive slowdowns due to overhangs. In these " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " +"transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12039,56 +14901,67 @@ msgstr "" "ekstrüzyona geçtiğinde veya tam tersi olduğunda meydana gelen ani ekstrüzyon " "hızı değişikliklerini düzeltir.\n" "\n" -"Ekstrude edilen hacimsel akışın mm3/sn cinsinden zaman içinde değişebileceği " +"Ekstrude edilen hacimsel akışın mm³/s cinsinden zaman içinde değişebileceği " "maksimum oranı tanımlar. Daha yüksek değerler, daha yüksek ekstrüzyon hızı " "değişikliklerine izin verildiği anlamına gelir ve daha hızlı hız geçişlerine " "neden olur.\n" "\n" -"0 değeri özelliği devre dışı bırakır. \n" +"0 değeri özelliği devre dışı bırakır.\n" "\n" -"Yüksek hızlı, yüksek akışlı doğrudan tahrikli bir yazıcı için (Bambu lab veya " -"Voron gibi) bu değer genellikle gerekli değildir. Ancak özellik hızlarının " -"büyük ölçüde değiştiği bazı durumlarda marjinal bir fayda sağlayabilir. " -"Örneğin, çıkıntılar nedeniyle agresif yavaşlamalar olduğunda. Bu durumlarda " -"300-350mm3/s2 civarında yüksek bir değer önerilir çünkü bu, basınç " -"ilerlemesinin daha yumuşak bir akış geçişi elde etmesine yardımcı olmak için " -"yeterli yumuşatmaya izin verir.\n" +"Yüksek hızlı, yüksek akışlı doğrudan tahrikli bir yazıcı için (Bambu lab " +"veya Voron gibi) bu değer genellikle gerekli değildir. Ancak özellik " +"hızlarının büyük ölçüde değiştiği bazı durumlarda marjinal bir fayda " +"sağlayabilir. Örneğin, çıkıntılar nedeniyle agresif yavaşlamalar olduğunda. " +"Bu durumlarda 300-350 mm³/s² civarında yüksek bir değer önerilir çünkü bu, " +"basınç ilerlemesinin daha yumuşak bir akış geçişi elde etmesine yardımcı " +"olmak için yeterli yumuşatmaya izin verir.\n" "\n" "Basınç avansı olmayan daha yavaş yazıcılar için değer çok daha düşük " -"ayarlanmalıdır. Doğrudan tahrikli ekstruderler için 10-15mm3/s2 ve Bowden " -"tarzı için 5-10mm3/s2 değeri iyi bir başlangıç noktasıdır. \n" +"ayarlanmalıdır. Doğrudan tahrikli ekstruderler için 10-15 mm³/s² ve Bowden " +"tarzı için 5-10 mm³/s² değeri iyi bir başlangıç noktasıdır.\n" "\n" "Bu özellik Prusa slicer'da Basınç Dengeleyici olarak bilinir.\n" "\n" "Not: bu parametre ark montajını devre dışı bırakır." -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "Segment uzunluğunu yumuşatma" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Daha düşük bir değer, daha yumuşak ekstrüzyon hızı geçişleriyle sonuçlanır. " -"Ancak bu, önemli ölçüde daha büyük bir gcode dosyası ve yazıcının işlemesi " -"için daha fazla talimatla sonuçlanır. \n" +"Daha düşük bir değer, daha düzgün ekstrüzyon hızı geçişleriyle sonuçlanır. " +"Ancak bu, önemli ölçüde daha büyük bir gcode dosyasına ve yazıcının işlemesi " +"için daha fazla talimata neden olur.\n" "\n" -"Varsayılan değer olan 3 çoğu durumda iyi çalışır. Yazıcınız takılıyorsa, " -"yapılan ayarlamaların sayısını azaltmak için bu değeri artırın\n" +"Varsayılan 3 değeri çoğu durumda işe yarar. Yazıcınız tutukluk yapıyorsa, " +"yapılan ayarlama sayısını azaltmak için bu değeri artırın\n" "\n" -"İzin verilen değerler: 1-5" +"İzin verilen değerler: 0,5-5" -msgid "Minimum speed for part cooling fan" -msgstr "Parça soğutma fanı için minimum hız" +msgid "Apply only on external features" +msgstr "Yalnızca harici özelliklere uygula" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Ekstrüzyon hızı yumuşatmayı yalnızca dış çevre ve çıkıntılara uygular. Bu, " +"kullanıcı tarafından görülmeyecek özelliklerin yazdırma hızını etkilemeden, " +"dışarıdan görülebilen çıkıntılarda keskin hız geçişlerinden kaynaklanan " +"bozulmaların azaltılmasına yardımcı olabilir." + +msgid "Minimum speed for part cooling fan." +msgstr "Parça soğutma fanı için minimum hız." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " @@ -12103,34 +14976,28 @@ msgstr "" "Lütfen bu özelliği kullanmak için yazıcı ayarlarında yardımcı_fan'ı " "etkinleştirin. G-code komut: M106 P2 S(0-255)" -msgid "Min" -msgstr "Minimum" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Ekstruder için yazdırılabilir en düşük katman yüksekliği. Kullanılan tp, " -"uyarlanabilir katman yüksekliğini etkinleştirirken minimum katman " -"yüksekliğini sınırlar" +"Ekstruder için yazdırılabilir en düşük katman yüksekliği. Uyarlanabilir " +"katman yüksekliği etkinleştirildiğinde minimum katman yüksekliğini " +"sınırlamak için kullanılır." msgid "Min print speed" msgstr "Minimum baskı hızı" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıdaki " -"minimum katman süresini korumaya çalışmak için yazıcının yavaşlayacağı " +"Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıda " +"tanımlanan minimum katman süresini korumak için yazıcının yavaşladığı " "minimum yazdırma hızı." -msgid "Nozzle diameter" -msgstr "Nozul çapı" - -msgid "Diameter of nozzle" -msgstr "Nozul çapı" +msgid "The diameter of nozzle." +msgstr "Nozul çapı." msgid "Configuration notes" msgstr "Yapılandırma notları" @@ -12149,14 +15016,14 @@ msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." msgstr "" -"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " -"alan ana bilgisayarın türünü içermelidir." +"Snapmaker Orca, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. " +"Bu alan ana bilgisayarın türünü içermelidir." msgid "Nozzle volume" msgstr "Nozul hacmi" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "Kesici ile nozulun ucu arasındaki nozul hacmi" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Kesici ile nozulun ucu arasındaki nozul hacmi." msgid "Cooling tube position" msgstr "Soğutma borusu konumu" @@ -12191,8 +15058,8 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" -"Ekstruder ucunun, boşaltıldığında filamentin park edildiği konumdan uzaklığı. " -"Bu ayar yazıcı ürün yazılımındaki değerle eşleşmelidir." +"Ekstruder ucunun, boşaltıldığında filamentin park edildiği konumdan " +"uzaklığı. Bu ayar yazıcı ürün yazılımındaki değerle eşleşmelidir." msgid "Extra loading distance" msgstr "Ekstra yükleme mesafesi" @@ -12200,7 +15067,7 @@ msgstr "Ekstra yükleme mesafesi" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Sıfır olarak ayarlandığında, yükleme sırasında filamentin park konumundan " @@ -12219,20 +15086,27 @@ msgstr "Dolguda geri çekmeyi azalt" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " -"oozing can't been seen. This can reduce times of retraction for complex model " -"and save printing time, but make slicing and G-code generating slower" +"oozing can't been seen. This can reduce times of retraction for complex " +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Hareket kesinlikle dolgu alanına girdiğinde geri çekilmeyin. Bu, sızıntının " "görülemeyeceği anlamına gelir. Bu, karmaşık model için geri çekme sürelerini " "azaltabilir ve yazdırma süresinden tasarruf sağlayabilir, ancak dilimlemeyi " -"ve G kodu oluşturmayı yavaşlatır" +"ve G kodu oluşturmayı yavaşlatır." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Bu seçenek sızıntıyı önlemek için aktif olmayan ekstrüderlerin sıcaklığını " +"düşürecektir." msgid "Filename format" msgstr "Dosya adı formatı" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" -"Kullanıcı dışa aktarma sırasında proje dosyası adını kendisi tanımlayabilir" +"Kullanıcı dışa aktarma sırasında proje dosyası adını kendisi tanımlayabilir." msgid "Make overhangs printable" msgstr "Çıkıntılar yazdırılabilir" @@ -12257,25 +15131,25 @@ msgid "Make overhangs printable - Hole area" msgstr "Yazdırılabilir çıkıntı delik alanı oluşturun" msgid "" -"Maximum area of a hole in the base of the model before it's filled by conical " -"material.A value of 0 will fill all the holes in the model base." +"Maximum area of a hole in the base of the model before it's filled by " +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" -"Modelin tabanındaki bir deliğin, konik malzemeyle doldurulmadan önce maksimum " -"alanı. 0 değeri, model tabanındaki tüm delikleri dolduracaktır." - -msgid "mm²" -msgstr "mm²" +"Modelin tabanındaki bir deliğin, konik malzemeyle doldurulmadan önce " +"maksimum alanı. 0 değeri, model tabanındaki tüm delikleri dolduracaktır." msgid "Detect overhang wall" msgstr "Çıkıntılı duvarı algıla" #, c-format, boost-format msgid "" -"Detect the overhang percentage relative to line width and use different speed " -"to print. For 100%% overhang, bridge speed is used." +"Detect the overhang percentage relative to line width and use different " +"speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Çizgi genişliğine göre çıkıntı yüzdesini tespit edin ve yazdırmak için farklı " -"hızlar kullanın. %%100 çıkıntı için köprü hızı kullanılır." +"Çizgi genişliğine göre çıkıntı yüzdesini tespit edin ve yazdırmak için " +"farklı hızlar kullanın. %%100 çıkıntı için köprü hızı kullanılır." + +msgid "Filament to print walls." +msgstr "Duvarları yazdırmak için filament." msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " @@ -12284,21 +15158,21 @@ msgstr "" "İç duvarın çizgi genişliği. % olarak ifade edilirse Nozul çapı üzerinden " "hesaplanacaktır." -msgid "Speed of inner wall" -msgstr "İç duvarın hızı" +msgid "Speed of inner wall." +msgstr "İç duvarın hızı." -msgid "Number of walls of every layer" -msgstr "Her katmanın duvar sayısı" +msgid "Number of walls of every layer." +msgstr "Her katmanın duvar sayısı." msgid "Alternate extra wall" msgstr "Alternatif ekstra duvar" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" -"When this option is enabled, the ensure vertical shell thickness option needs " -"to be disabled. \n" +"When this option is enabled, the ensure vertical shell thickness option " +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -12307,7 +15181,7 @@ msgstr "" "arasında dikey olarak sıkışır ve daha güçlü baskılar elde edilir.\n" "\n" "Bu seçenek etkinleştirildiğinde dikey kabuk kalınlığını sağla seçeneğinin " -"devre dışı bırakılması gerekir. \n" +"devre dışı bırakılması gerekir.\n" "\n" "İlave çevrelerin sabitleneceği dolgu sınırlı olduğundan, bu seçenekle " "birlikte yıldırım dolgusunun kullanılması önerilmez." @@ -12319,10 +15193,17 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" -"Çıktı G-kodunu özel komut dosyaları aracılığıyla işlemek istiyorsanız, mutlak " -"yollarını burada listeleyin. Birden fazla betiği noktalı virgülle ayırın. " -"Betiklere ilk argüman olarak G-code dosyasının mutlak yolu aktarılır ve ortam " -"değişkenlerini okuyarak Snapmaker Orca yapılandırma ayarlarına erişebilirler." +"Çıktı G-kodunu özel komut dosyaları aracılığıyla işlemek istiyorsanız, " +"mutlak yollarını burada listeleyin. Birden fazla betiği noktalı virgülle " +"ayırın. Betiklere ilk argüman olarak G-code dosyasının mutlak yolu aktarılır " +"ve ortam değişkenlerini okuyarak Snapmaker Orca yapılandırma ayarlarına " +"erişebilirler." + +msgid "Printer type" +msgstr "Yazıcı türü" + +msgid "Type of the printer." +msgstr "Yazıcı türü." msgid "Printer notes" msgstr "Yazıcı notları" @@ -12330,93 +15211,100 @@ msgstr "Yazıcı notları" msgid "You can put your notes regarding the printer here." msgstr "Yazıcı ile ilgili notlarınızı buraya yazabilirsiniz." +msgid "Printer variant" +msgstr "Yazıcı çeşidi" + msgid "Raft contact Z distance" msgstr "Raft kontak Z mesafesi" -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "Nesne ve raft arasındaki Z boşluğu. Çözünür arayüz için göz ardı edildi" +msgid "Z gap between object and raft. Ignored for soluble interface." +msgstr "" +"Nesne ve raft arasındaki Z boşluğu. Çözünür arayüz için göz ardı edildi." msgid "Raft expansion" msgstr "Raft genişletme" -msgid "Expand all raft layers in XY plane" -msgstr "XY düzlemindeki tüm sal katmanlarını genişlet" +msgid "Expand all raft layers in XY plane." +msgstr "XY düzlemindeki tüm rafa katmanlarını genişlet." msgid "Initial layer density" msgstr "Başlangıç katman yoğunluğu" -msgid "Density of the first raft or support layer" -msgstr "İlk sal veya destek katmanının yoğunluğu" +msgid "Density of the first raft or support layer." +msgstr "İlk sal veya destek katmanının yoğunluğu." msgid "Initial layer expansion" msgstr "İlk katman genişletme" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" "Yatak plakası yapışmasını iyileştirmek için ilk raft veya destek katmanını " -"genişletin" +"genişletin." msgid "Raft layers" msgstr "Raft katmanları" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"Nesne bu sayıdaki destek katmanı tarafından yükseltilecektir. ABS yazdırırken " -"sarmayı önlemek için bu işlevi kullanın" +"Nesne bu sayıdaki destek katmanı tarafından yükseltilecektir. ABS " +"yazdırırken sarmayı önlemek için bu işlevi kullanın." msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Gcode dosyasında çok fazla nokta ve gcode çizgisinin olmaması için modelin " "konturu basitleştirildikten sonra G-code yolu oluşturulur. Daha küçük değer, " -"daha yüksek çözünürlük ve dilimleme için daha fazla zaman anlamına gelir" +"daha yüksek çözünürlük ve dilimleme için daha fazla zaman anlamına gelir." msgid "Travel distance threshold" msgstr "Seyahat mesafesi" msgid "" -"Only trigger retraction when the travel distance is longer than this threshold" +"Only trigger retraction when the travel distance is longer than this " +"threshold." msgstr "" "Geri çekmeyi yalnızca hareket mesafesi bu eşikten daha uzun olduğunda " -"tetikleyin" +"tetikleyin." msgid "Retract amount before wipe" msgstr "Temizleme işlemi öncesi geri çekme miktarı" -msgid "The length of fast retraction before wipe, relative to retraction length" +msgid "" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"Geri çekme uzunluğuna göre, temizlemeden önce hızlı geri çekilmenin uzunluğu" +"Geri çekme uzunluğuna göre, temizlemeden önce hızlı geri çekilmenin uzunluğu." msgid "Retract when change layer" msgstr "Katman değişiminde geri çek" -msgid "Force a retraction when changes layer" -msgstr "Katmanı değiştirdiğinde geri çekilmeyi zorla" +msgid "Force a retraction when changes layer." +msgstr "Katmanı değiştirdiğinde geri çekilmeyi zorla." msgid "Retraction Length" msgstr "Geri Çekme Uzunluğu" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Uzun seyahat sırasında sızıntıyı önlemek için ekstruderdeki malzemenin bir " -"kısmı geri çekilir. Geri çekmeyi devre dışı bırakmak için sıfır ayarlayın" +"Uzun mesafelerde sızıntıyı önlemek için ekstruderdeki bir miktar malzeme " +"geri çekilir. Geri çekilmeyi devre dışı bırakmak için sıfır değerini " +"ayarlayın." -msgid "Long retraction when cut(experimental)" -msgstr "Kesildiğinde uzun geri çekilme (deneysel)" +msgid "Long retraction when cut (beta)" +msgstr "Kesildiğinde uzun geri çekilme (beta)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" -"Deneysel özellik. Tasfiyeyi en aza indirmek için değişiklikler sırasında " +"Deneysel özellik: Tasfiyeyi en aza indirmek için değişiklikler sırasında " "filamentin daha uzun bir mesafeden geri çekilmesi ve kesilmesi. Bu, yıkamayı " "önemli ölçüde azaltırken, aynı zamanda nozul tıkanması veya diğer yazdırma " "sorunları riskini de artırabilir." @@ -12425,48 +15313,57 @@ msgid "Retraction distance when cut" msgstr "Kesildiğinde geri çekilme mesafesi" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" -"Deneysel özellik.Filament değişimi sırasında kesilmeden önce geri çekilme " -"uzunluğu" +"Deneysel özellik: Filament değişimi sırasında kesilmeden önce geri çekilme " +"uzunluğu." -msgid "Z hop when retract" -msgstr "Geri çekme esnasında Z sıçraması" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Z-Sıçrama yüksekliği" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Geri çekme işlemi her yapıldığında, nozul ile baskı arasında açıklık " "oluşturmak için nozul biraz kaldırılır. Hareket halindeyken nozulun baskıya " "çarpmasını önler. Z'yi kaldırmak için spiral çizgi kullanmak çekmeyi " -"önleyebilir" +"önleyebilir." -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Z sıçrama alt sınırı" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Z sıçraması yalnızca Z bu değerin üzerinde ve parametrenin altında olduğunda " -"devreye girer: \"Z sıçraması üst sınırı\"" +"devreye girer: \"Z sıçraması üst sınırı”." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Z sıçrama üst sınırı" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Bu değer pozitifse, Z sıçraması yalnızca Z parametresinin üzerinde olduğunda " "etkinleşir: \"Z sıçrama alt sınırı\" parametresinin üzerinde ve bu değerin " -"altında olduğunda" +"altında olduğunda." -msgid "Z hop type" -msgstr "Z sıçraması türü" +msgid "Z-hop type" +msgstr "Z-Sıçrama türü" + +msgid "Type of Z-hop." +msgstr "Z-hop türü." msgid "Slope" msgstr "Eğim" @@ -12475,12 +15372,14 @@ msgid "Spiral" msgstr "Spiral" msgid "Traveling angle" -msgstr "" +msgstr "Seyahat açısı" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results in " -"Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Eğim ve Spiral Z atlama tipi için ilerleme açısı. 90°’ye ayarlamak normal " +"kaldırmayla sonuçlanır." msgid "Only lift Z above" msgstr "Z'yi sadece şu değerin üstündeki durumlarda kaldır" @@ -12506,10 +15405,10 @@ msgid "On surfaces" msgstr "Yüzeyler" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"Z Hop davranışını zorunlu kılın. Bu ayar yukarıdaki ayarlardan etkilenir " +"Z-Hop davranışını zorunlu kılın. Bu ayar yukarıdaki ayarlardan etkilenir " "(Z'yi yalnızca yukarıya/aşağıya kaldırın)." msgid "All Surfaces" @@ -12524,6 +15423,18 @@ msgstr "Sadece alt" msgid "Top and Bottom" msgstr "Üst ve alt" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Yeniden başlatma sırasında ekstra uzunluk" @@ -12544,18 +15455,18 @@ msgstr "" msgid "Retraction Speed" msgstr "Geri çekme hızı" -msgid "Speed of retractions" -msgstr "Geri çekme hızları" +msgid "Speed for retracting filament from the nozzle." +msgstr "Nozuldan filamentin geri çekilme hızı." -msgid "Deretraction Speed" -msgstr "İleri itme Hızı" +msgid "De-retraction Speed" +msgstr "İleri itme hızı" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Filamenti ekstrudere yeniden yükleme hızı. Sıfır, geri çekilmeyle aynı hız " -"anlamına gelir" +"Filamentin nozüle yeniden yüklenme hızı. Sıfır, geri çekilme hızının aynı " +"olduğu anlamına gelir." msgid "Use firmware retraction" msgstr "Yazılımsal geri çekme" @@ -12575,16 +15486,16 @@ msgid "Disable set remaining print time" msgstr "Kalan yazdırma süresini ayarlamayı devre dışı bırak" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "M73'ün oluşturulmasını devre dışı bırakın: Son gcode'da kalan yazdırma " -"süresini ayarlayın" +"süresini ayarlayın." msgid "Seam position" msgstr "Dikiş konumu" -msgid "The start position to print each part of outer wall" -msgstr "Dış duvarın her bir parçasını yazdırmak için başlangıç konumu" +msgid "The start position to print each part of outer wall." +msgstr "Dış duvarın her bir parçasını yazdırmak için başlangıç konumu." msgid "Nearest" msgstr "En yakın" @@ -12592,6 +15503,9 @@ msgstr "En yakın" msgid "Aligned" msgstr "Hizalı" +msgid "Aligned back" +msgstr "Arkaya hizalı" + msgid "Back" msgstr "Arka" @@ -12612,13 +15526,13 @@ msgid "Seam gap" msgstr "Dikiş boşluğu" msgid "" -"In order to reduce the visibility of the seam in a closed loop extrusion, the " -"loop is interrupted and shortened by a specified amount.\n" -"This amount can be specified in millimeters or as a percentage of the current " -"extruder diameter. The default value for this parameter is 10%." +"In order to reduce the visibility of the seam in a closed loop extrusion, " +"the loop is interrupted and shortened by a specified amount.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current extruder diameter. The default value for this parameter is 10%." msgstr "" -"Kapalı döngü ekstrüzyonda dikişin görünürlüğünü azaltmak için döngü kesintiye " -"uğrar ve belirli bir miktarda kısaltılır.\n" +"Kapalı döngü ekstrüzyonda dikişin görünürlüğünü azaltmak için döngü " +"kesintiye uğrar ve belirli bir miktarda kısaltılır.\n" "Bu miktar milimetre cinsinden veya mevcut ekstruder çapının yüzdesi olarak " "belirtilebilir. Bu parametrenin varsayılan değeri %10'dur." @@ -12627,8 +15541,8 @@ msgstr "Atkı birleşim dikişi (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "" -"Dikiş görünürlüğünü en aza indirmek ve dikiş mukavemetini arttırmak için atkı " -"birleşimini kullanın." +"Dikiş görünürlüğünü en aza indirmek ve dikiş mukavemetini arttırmak için " +"atkı birleşimini kullanın." msgid "Conditional scarf joint" msgstr "Koşullu atkı birleşimi" @@ -12646,9 +15560,9 @@ msgstr "Koşullu açı eşiği" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " "seam.\n" -"If the maximum angle within the perimeter loop exceeds this value (indicating " -"the absence of sharp corners), a scarf joint seam will be used. The default " -"value is 155°." +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." msgstr "" "Bu seçenek, koşullu bir atkı eklem dikişi uygulamak için eşik açısını " "ayarlar.\n" @@ -12663,8 +15577,8 @@ msgstr "Koşullu çıkıntı eşiği" msgid "" "This option determines the overhang threshold for the application of scarf " "joint seams. If the unsupported portion of the perimeter is less than this " -"threshold, scarf joint seams will be applied. The default threshold is set at " -"40% of the external wall's width. Due to performance considerations, the " +"threshold, scarf joint seams will be applied. The default threshold is set " +"at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" "Bu seçenek, atkı bağlantı dikişlerinin uygulanması için sarkma eşiğini " @@ -12678,7 +15592,7 @@ msgstr "Atkı birleşim hızı" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " "to enable 'Extrusion rate smoothing' if the set speed varies significantly " "from the speed of the outer or inner walls. If the speed specified here is " "higher than the speed of the outer or inner walls, the printer will default " @@ -12689,11 +15603,11 @@ msgstr "" "Bu seçenek, atkı bağlantılarının yazdırma hızını ayarlar. Atkı " "bağlantılarının yavaş bir hızda (100 mm/s'den az) yazdırılması tavsiye " "edilir. Ayarlanan hızın dış veya iç duvarların hızından önemli ölçüde farklı " -"olması durumunda 'Ekstrüzyon hızı yumuşatma' seçeneğinin etkinleştirilmesi de " -"tavsiye edilir. Burada belirtilen hız, dış veya iç duvarların hızından daha " -"yüksekse, yazıcı varsayılan olarak iki hızdan daha yavaş olanı seçecektir. " -"Yüzde olarak belirtildiğinde (örn. %80), hız, ilgili dış veya iç duvar hızına " -"göre hesaplanır. Varsayılan değer %100 olarak ayarlanmıştır." +"olması durumunda 'Ekstrüzyon hızı yumuşatma' seçeneğinin etkinleştirilmesi " +"de tavsiye edilir. Burada belirtilen hız, dış veya iç duvarların hızından " +"daha yüksekse, yazıcı varsayılan olarak iki hızdan daha yavaş olanı " +"seçecektir. Yüzde olarak belirtildiğinde (örn. %80), hız, ilgili dış veya iç " +"duvar hızına göre hesaplanır. Varsayılan değer %100 olarak ayarlanmıştır." msgid "Scarf joint flow ratio" msgstr "Atkı birleşimi akış oranı" @@ -12703,12 +15617,12 @@ msgstr "" "Bu faktör atkı birleşimlerinde kullanılacak materyal miktarını değiştirir." msgid "Scarf start height" -msgstr "Atkı başlangıç ​​yüksekliği" +msgstr "Atkı başlangıç yüksekliği" msgid "" "Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the current " -"layer height. The default value for this parameter is 0." +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." msgstr "" "Atkı başlangıç yüksekliği.\n" "Bu miktar milimetre cinsinden veya geçerli katman yüksekliğinin yüzdesi " @@ -12727,8 +15641,8 @@ msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." msgstr "" -"Atkının uzunluğu. Bu parametrenin 0 a ayarlanması atkıyı dolaylı yoldan devre " -"dışı bırakır." +"Atkının uzunluğu. Bu parametrenin 0 a ayarlanması atkıyı dolaylı yoldan " +"devre dışı bırakır." msgid "Scarf steps" msgstr "Atkı kademesi" @@ -12746,9 +15660,10 @@ msgid "Role base wipe speed" msgstr "Otomatik temizleme hızı" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "Temizleme hızı mevcut ekstrüzyon rolünün hızına göre belirlenir; bir dış " "duvar ekstrüzyonunun hemen ardından bir silme eylemi yürütülürse, silme " @@ -12769,50 +15684,72 @@ msgid "Wipe before external loop" msgstr "Harici döngüden önce silin" msgid "" -"To minimise visibility of potential overextrusion at the start of an external " -"perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print " -"order, the deretraction is performed slightly on the inside from the start of " -"the external perimeter. That way any potential over extrusion is hidden from " -"the outside surface. \n" +"To minimize visibility of potential overextrusion at the start of an " +"external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order, the de-retraction is performed slightly on the inside from the " +"start of the external perimeter. That way any potential over extrusion is " +"hidden from the outside surface.\n" "\n" -"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print " -"order as in these modes it is more likely an external perimeter is printed " -"immediately after a deretraction move." +"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order as in these modes it is more likely an external perimeter is " +"printed immediately after a de-retraction move." msgstr "" "Dış/İç veya İç/Dış/İç duvar baskı sırası ile yazdırırken, dış çevrenin " "başlangıcında olası aşırı çıkıntının görünürlüğünü en aza indirmek için, " "kaldırma işlemi dış çevrenin başlangıcından itibaren biraz içeride " "gerçekleştirilir. Bu şekilde herhangi bir aşırı ekstrüzyon potansiyeli dış " -"yüzeyden gizlenir. \n" +"yüzeyden gizlenir.\n" "\n" "Bu, Dış/İç veya İç/Dış/İç duvar yazdırma sırası ile yazdırırken " -"kullanışlıdır, çünkü bu modlarda, bir geri çekilme hareketinin hemen ardından " -"bir dış çevrenin yazdırılması daha olasıdır." +"kullanışlıdır, çünkü bu modlarda, bir geri çekilme hareketinin hemen " +"ardından bir dış çevrenin yazdırılması daha olasıdır." msgid "Wipe speed" msgstr "Temizleme hızı" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "Temizleme hızı, bu konfigürasyonda belirtilen hız ayarına göre belirlenir. " "Değer yüzde olarak ifade edilirse (örn. %80), yukarıdaki ilerleme hızı " -"ayarına göre hesaplanır. Bu parametrenin varsayılan değeri %80'dir" +"ayarına göre hesaplanır. Bu parametrenin varsayılan değeri %80'dir." msgid "Skirt distance" msgstr "Etek mesafesi" -msgid "Distance from skirt to brim or object" -msgstr "Etekten kenara veya nesneye olan mesafe" +msgid "The distance from the skirt to the brim or the object." +msgstr "Etekten kenara veya nesneye olan mesafe." + +msgid "Skirt start point" +msgstr "Etek başlangıç noktası" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Nesnenin merkezinden etek başlangıç noktasına kadar olan açı. Sıfır en doğru " +"konumdur, saat yönünün tersine ise pozitif açıdır." msgid "Skirt height" msgstr "Etek yüksekliği" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Etek katman sayısı. Genellikle tek katman" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Etek katman sayısı. Genellikle tek katman." + +msgid "Single loop after first layer" +msgstr "İlk katmandan sonra tek duvar" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Etek/hava akımı kalkanı halkalarını ilk katmandan sonraki bir duvarla " +"sınırlar. Bu, bazen filament tasarrufu için yararlıdır, ancak hava akımı " +"kalkanı/eteğin eğrilmesine/çatlamasına neden olabilir." msgid "Draft shield" msgstr "Rüzgarlık" @@ -12820,12 +15757,10 @@ msgstr "Rüzgarlık" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" @@ -12833,27 +15768,35 @@ msgstr "" "Rüzgar taslağı nedeniyle ABS veya ASA baskının eğrilmesine ve baskı " "yatağından ayrılmasına karşı koruma sağlamak için bir rüzgarlık " "kullanışlıdır. Genellikle yalnızca açık çerçeveli, yani muhafazasız " -"yazıcılarda gereklidir. \n" -"\n" -"Seçenekler:\n" -"Etkin = etek, yazdırılan en yüksek nesne kadar uzundur.\n" -"Sınırlı = etek, etek yüksekliğinin belirttiği kadar uzundur.\n" +"yazıcılarda gereklidir.\n" "\n" +"Etkin = etek, yazdırılan en yüksek nesne kadar uzun. Aksi takdirde ‘Etek " +"yüksekliği’ kullanılır.\n" "Not: Rüzgarlık etkinken etek, nesneden etek mesafesinde yazdırılacaktır. Bu " "nedenle eğer kenarlar aktifse onlarla kesişebilir. Bunu önlemek için etek " "mesafesi değerini artırın.\n" -msgid "Limited" -msgstr "Sınırlı" - msgid "Enabled" msgstr "Etkin" +msgid "Skirt type" +msgstr "Etek tipi" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Birleşik - tüm nesneler için tek etek, Nesneye göre - ayrı nesne eteği." + +msgid "Per object" +msgstr "Nesneye göre" + msgid "Skirt loops" msgstr "Etek sayısı" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "Etek için ilmek sayısı. Sıfır, eteği devre dışı bırakmak anlamına gelir" +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "" +"Etek için ilmek sayısı. Sıfır, eteği devre dışı bırakmak anlamına gelir." msgid "Skirt speed" msgstr "Etek hızı" @@ -12870,80 +15813,121 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" "Etek yazdırılırken mm cinsinden minimum filaman ekstrüzyon uzunluğu. Sıfır, " "bu özelliğin devre dışı olduğu anlamına gelir.\n" "\n" "Yazıcı ana hat olmadan yazdırmak üzere ayarlanmışsa sıfır dışında bir değer " -"kullanmak yararlı olur." +"kullanmak yararlı olur.\n" +"Nihai döngü sayısı, nesnelerin mesafesini düzenlerken veya doğrularken " +"dikkate alınmaz. Böyle bir durumda döngü sayısını artırın." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Tahmini katman süresi bu değerden kısa olduğunda, bu katmanlar için daha iyi " "soğutma sağlamak amacıyla, dışa aktarılan gcode'daki yazdırma hızı " -"yavaşlatılacaktır" +"yavaşlatılacaktır." msgid "Minimum sparse infill threshold" msgstr "Minimum seyrek dolgu" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" "Eşik değerinden küçük olan seyrek dolgu alanı, yerini iç katı dolguya " -"bırakmıştır" +"bırakmıştır." + +msgid "Solid infill" +msgstr "Katı dolgu" + +msgid "Filament to print solid infill." +msgstr "Katı dolguyu yazdırmak için filament." msgid "" -"Line width of internal solid infill. If expressed as a %, it will be computed " -"over the nozzle diameter." +"Line width of internal solid infill. If expressed as a %, it will be " +"computed over the nozzle diameter." msgstr "" "İç katı dolgunun çizgi genişliği. % olarak ifade edilirse Nozul çapı " "üzerinden hesaplanacaktır." -msgid "Speed of internal solid infill, not the top and bottom surface" -msgstr "Üst ve alt yüzeyin değil, iç katı dolgunun hızı" +msgid "Speed of internal solid infill, not the top and bottom surface." +msgstr "Üst ve alt yüzeyin değil, iç katı dolgunun hızı." msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Spiralleştirme, dış konturun z hareketlerini yumuşatır. Ve katı bir modeli, " -"katı alt katmanlara sahip tek duvarlı bir baskıya dönüştürür. Oluşturulan son " -"modelde dikiş yok." +"katı alt katmanlara sahip tek duvarlı bir baskıya dönüştürür. Oluşturulan " +"son modelde dikiş yok." msgid "Smooth Spiral" msgstr "Pürüzsüz spiral" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "Pürüzsüz Spiral, X ve Y hareketlerini de yumuşatır ve dikey olmayan " "duvarlarda XY yönlerinde bile hiçbir görünür ek yeri oluşmamasını sağlar." msgid "Max XY Smoothing" -msgstr "Maksimum xy yumuşatma" +msgstr "Maksimum XY yumuşatma" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "Düzgün bir spiral elde etmek için XY'deki noktaları hareket ettirmek için " "maksimum mesafe % olarak ifade edilirse nozül çapı üzerinden hesaplanacaktır." +msgid "Spiral starting flow ratio" +msgstr "Spiral başlangıç akış oranı" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Son alt katmandan spirale geçiş sırasında başlangıç akış oranını ayarlar. " +"Normalde spiral geçiş, ilk döngü sırasında akış oranını %0 dan %100 e " +"ölçeklendirir; bu da bazı durumlarda spiralin başlangıcında yetersiz " +"ekstrüzyona yol açabilir." + +msgid "Spiral finishing flow ratio" +msgstr "Spiral bitirme akış oranı" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Spirali sonlandırırken bitirme akış oranını ayarlar. Normalde spiral geçiş, " +"son döngü sırasında akış oranını %100 den %0 a ölçeklendirir; bu da bazı " +"durumlarda spiralin sonunda yetersiz ekstrüzyona yol açabilir." + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " -"with the chamber camera. All of these snapshots are composed into a timelapse " -"video when printing completes. If smooth mode is selected, the toolhead will " -"move to the excess chute after each layer is printed and then take a " -"snapshot. Since the melt filament may leak from the nozzle during the process " -"of taking a snapshot, prime tower is required for smooth mode to wipe nozzle." +"with the chamber camera. All of these snapshots are composed into a " +"timelapse video when printing completes. If smooth mode is selected, the " +"toolhead will move to the excess chute after each layer is printed and then " +"take a snapshot. Since the melt filament may leak from the nozzle during the " +"process of taking a snapshot, prime tower is required for smooth mode to " +"wipe nozzle." msgstr "" "Düzgün veya geleneksel mod seçilirse her baskı için bir hızlandırılmış video " "oluşturulacaktır. Her katman basıldıktan sonra oda kamerasıyla anlık görüntü " @@ -12960,20 +15944,54 @@ msgstr "Geleneksel" msgid "Temperature variation" msgstr "Sıcaklık değişimi" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Ekstruder aktif olmadığında uygulanacak sıcaklık farkı. Filament ayarlarında " +"‘rölanti sıcaklığı’ sıfır olmayan bir değere ayarlandığında bu değer " +"kullanılmaz." + +msgid "Preheat time" +msgstr "Ön ısıtma süresi" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Takım değişiminden sonra bekleme süresini azaltmak için Orca, mevcut takım " +"hala kullanımdayken bir sonraki takıma ön ısıtma yapabilir. Bu ayar, bir " +"sonraki takımın ön ısıtılması için gereken süreyi saniye cinsinden belirtir. " +"Orca, aleti önceden ısıtmak için bir M104 komutu ekleyecektir." + +msgid "Preheat steps" +msgstr "Ön ısıtma adımları" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Birden fazla ön ısıtma komutu ekleyin (örn. M104.1). Yalnızca Prusa XL için " +"kullanışlıdır. Diğer yazıcılar için lütfen 1’e ayarlayın." + msgid "Start G-code" msgstr "Başlangıç G Kodu" -msgid "Start G-code when start the whole printing" -msgstr "Baskı başladığında çalışacak G Kodu" +msgid "Start G-code when starting the entire print." +msgstr "Baskı başladığında çalışacak G Kodu." -msgid "Start G-code when start the printing of this filament" -msgstr "Bu filament ile baskı başladığında çalıştırılacak G-Kod" +msgid "Start G-code when starting the printing of this filament." +msgstr "Bu filament ile baskı başladığında çalıştırılacak G-Kod." msgid "Single Extruder Multi Material" msgstr "Tek ekstruder çoklu malzeme" -msgid "Use single nozzle to print multi filament" -msgstr "Çoklu filament basmak için tek nozul kullan" +msgid "Use single nozzle to print multi filament." +msgstr "Çoklu filament basmak için tek nozul kullan." msgid "Manual Filament Change" msgstr "Manuel filament değişimi" @@ -12994,8 +16012,8 @@ msgstr "" msgid "Purge in prime tower" msgstr "Prime tower'da temizlik" -msgid "Purge remaining filament into prime tower" -msgstr "Kalan filamenti Prime Tower'da boşalt" +msgid "Purge remaining filament into prime tower." +msgstr "Kalan filamenti Prime Tower'da akıt." msgid "Enable filament ramming" msgstr "Filament sıkıştırmayı etkinleştir" @@ -13004,9 +16022,10 @@ msgid "No sparse layers (beta)" msgstr "Seyrek katman yok (beta)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no toolchanges. " -"On layers with a toolchange, extruder will travel downward to print the wipe " -"tower. User is responsible for ensuring there is no collision with the print." +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " +"print the wipe tower. User is responsible for ensuring there is no collision " +"with the print." msgstr "" "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda " "yazdırılmayacaktır. Araç değişimi olan katmanlarda, ekstruder silme kulesini " @@ -13031,16 +16050,16 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Üçgen mesh dilimleme sırasında 2x boşluk kapatma yarıçapından küçük çatlaklar " -"doldurulmaktadır. Boşluk kapatma işlemi son yazdırma çözünürlüğünü " +"Üçgen mesh dilimleme sırasında 2x boşluk kapatma yarıçapından küçük " +"çatlaklar doldurulmaktadır. Boşluk kapatma işlemi son yazdırma çözünürlüğünü " "düşürebilir, bu nedenle değerin oldukça düşük tutulması tavsiye edilir." msgid "Slicing Mode" msgstr "Dilimleme modu" msgid "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close " -"all holes in the model." +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." msgstr "" "3DLabPrint uçak modelleri için \"Çift-tek\" seçeneğini kullanın. Modeldeki " "tüm delikleri kapatmak için \"Delikleri kapat\"ı kullanın." @@ -13064,9 +16083,10 @@ msgid "" "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "Bu değer, çıkış G-kodu içindeki tüm Z koordinatlarına eklenir (veya " -"çıkarılır).Bu, kötü Z endstop konumunu telafi etmek için kullanılır: örneğin, " -"endstop sıfır noktanız aslında nozulu baskı tablasından 0.3mm uzakta " -"bırakıyorsa, bu değeri -0.3 olarak ayarlayın (veya endstop'unuzu düzeltin)." +"çıkarılır).Bu, kötü Z endstop konumunu telafi etmek için kullanılır: " +"örneğin, endstop sıfır noktanız aslında nozulu baskı plakasından 0.3mm " +"uzakta bırakıyorsa, bu değeri -0.3 olarak ayarlayın (veya endstop'unuzu " +"düzeltin)." msgid "Enable support" msgstr "Desteği etkinleştir" @@ -13075,31 +16095,37 @@ msgid "Enable support generation." msgstr "Destek oluşturmayı etkinleştir." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"Desteği otomatik olarak oluşturmak için normal(otomatik) ve ağaç(otomatik) " -"kullanılır. Normal(manuel) veya ağaç(manuel) seçilirse yalnızca destek " -"uygulayıcıları oluşturulur" +"Desteğin otomatik olarak oluşturulması için Normal (Otomatik) ve Ağaç " +"(Otomatik) kullanılır. Normal (Manuel) veya Ağaç (Manuel) seçilirse yalnızca " +"destek uygulayıcıları oluşturulur." -msgid "normal(auto)" -msgstr "Normal(Otomatik)" +msgid "Normal (auto)" +msgstr "Normal (Otomatik)" -msgid "tree(auto)" -msgstr "Ağaç(Otomatik)" +msgid "Tree (auto)" +msgstr "Ağaç (Otomatik)" -msgid "normal(manual)" -msgstr "Normal(Manuel)" +msgid "Normal (manual)" +msgstr "Normal (Manuel)" -msgid "tree(manual)" -msgstr "Ağaç(Manuel)" +msgid "Tree (manual)" +msgstr "Ağaç (Manuel)" -msgid "Support/object xy distance" -msgstr "Destek/nesne xy mesafesi" +msgid "Support/object XY distance" +msgstr "Destek/nesne XY mesafesi" -msgid "XY separation between an object and its support" -msgstr "Bir nesne ile desteği arasındaki XY ayrımı" +msgid "XY separation between an object and its support." +msgstr "Bir nesne ile desteği arasındaki XY ayrımı." + +msgid "Support/object first layer gap" +msgstr "Destek/nesne ilk katman boşluğu" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Bir nesne ile ilk katmandaki desteği arasındaki XY ayrımı." msgid "Pattern angle" msgstr "Desen açısı" @@ -13110,8 +16136,8 @@ msgstr "Destek desenini yatay düzlemde döndürmek için bu ayarı kullanın." msgid "On build plate only" msgstr "Yalnızca baskı plakasında" -msgid "Don't create support on model surface, only on build plate" -msgstr "Model yüzeyinde destek oluşturmayın, yalnızca baskı plakasında" +msgid "Don't create support on model surface, only on build plate." +msgstr "Model yüzeyinde destek oluşturmayın, yalnızca baskı plakasında." msgid "Support critical regions only" msgstr "Yalnızca kritik bölgeleri destekleyin" @@ -13120,36 +16146,37 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Yalnızca keskin kuyruk, konsol vb. gibi kritik bölgeler için destek oluşturun." +"Yalnızca keskin kuyruk, konsol vb. gibi kritik bölgeler için destek " +"oluşturun." -msgid "Remove small overhangs" -msgstr "Küçük çıkıntıları kaldır" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Muhtemelen desteğe ihtiyaç duymayan küçük çıkıntıları kaldırın." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" -msgstr "Üst Z mesafesi" +msgstr "Üst z mesafesi" -msgid "The z gap between the top support interface and object" -msgstr "Üst destek arayüzü ile nesne arasındaki z boşluğu" +msgid "The Z gap between the top support interface and object." +msgstr "Üst destek arayüzü ile nesne arasındaki z boşluğu." msgid "Bottom Z distance" -msgstr "Alt Z mesafesi" +msgstr "Alt z mesafesi" -msgid "The z gap between the bottom support interface and object" -msgstr "Alt destek arayüzü ile nesne arasındaki z boşluğu" +msgid "The Z gap between the bottom support interface and object." +msgstr "Alt destek arayüzü ile nesne arasındaki z boşluğu." msgid "Support/raft base" msgstr "Destek/raft tabanı" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "Destek tabanını ve salı yazdırmak için filament. \"Varsayılan\", destek için " "belirli bir filamentin olmadığı ve mevcut filamentin kullanıldığı anlamına " -"gelir" +"gelir." msgid "Avoid interface filament for base" msgstr "Taban için arayüz filamentini azaltın" @@ -13157,7 +16184,8 @@ msgstr "Taban için arayüz filamentini azaltın" msgid "" "Avoid using support interface filament to print support base if possible." msgstr "" -"Destek tabanını yazdırmak için destek arayüzü filamentini kullanmaktan kaçının" +"Destek tabanını yazdırmak için destek arayüzü filamentini kullanmaktan " +"kaçının." msgid "" "Line width of support. If expressed as a %, it will be computed over the " @@ -13180,22 +16208,22 @@ msgstr "Destek/raft arayüzü" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Filament baskı desteği arayüzü. \"Varsayılan\", destek arayüzü için özel bir " -"filamentin olmadığı ve mevcut filamentin kullanıldığı anlamına gelir" +"filamentin olmadığı ve mevcut filamentin kullanıldığı anlamına gelir." msgid "Top interface layers" msgstr "Üst arayüz katmanları" -msgid "Number of top interface layers" -msgstr "Üst arayüz katmanlarının sayısı" +msgid "Number of top interface layers." +msgstr "Üst arayüz katmanlarının sayısı." msgid "Bottom interface layers" msgstr "Alt arayüz katmanları" -msgid "Number of bottom interface layers" -msgstr "Alt arayüz katmanlarının sayısı" +msgid "Number of bottom interface layers." +msgstr "Alt arayüz katmanlarının sayısı." msgid "Same as top" msgstr "Üsttekiyle aynı" @@ -13203,23 +16231,27 @@ msgstr "Üsttekiyle aynı" msgid "Top interface spacing" msgstr "Üst arayüz aralığı" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Arayüz çizgilerinin aralığı. Sıfır, sağlam arayüz anlamına gelir" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" +"Arayüz çizgilerinin aralığı. Sıfır, katı arayüz anlamına gelir.\n" +"Destek ütüleme etkinleştirildiğinde katı arayüzü kullanarak zorlayın." msgid "Bottom interface spacing" msgstr "Alt arayüz aralığı" -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "Alt arayüz çizgilerinin aralığı. Sıfır, sağlam arayüz anlamına gelir" +msgid "Spacing of bottom interface lines. Zero means solid interface." +msgstr "Alt arayüz çizgilerinin aralığı. Sıfır, sağlam arayüz anlamına gelir." -msgid "Speed of support interface" -msgstr "Destek arayüzünün hızı" +msgid "Speed of support interface." +msgstr "Destek arayüzünün hızı." msgid "Base pattern" msgstr "Destek deseni" -msgid "Line pattern of support" -msgstr "Desteğin çizgi deseni" +msgid "Line pattern of support." +msgstr "Desteğin çizgi deseni." msgid "Rectilinear grid" msgstr "Doğrusal ızgara" @@ -13232,12 +16264,12 @@ msgstr "Arayüz deseni" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " -"interface is Rectilinear, while default pattern for soluble support interface " -"is Concentric" +"interface is Rectilinear, while default pattern for soluble support " +"interface is Concentric." msgstr "" "Destek arayüzünün çizgi deseni. Çözünmeyen destek arayüzü için varsayılan " "model Doğrusaldır, çözünebilir destek arayüzü için varsayılan model ise " -"eşmerkezlidir" +"eşmerkezlidir." msgid "Rectilinear Interlaced" msgstr "Doğrusal Taramalı" @@ -13245,28 +16277,29 @@ msgstr "Doğrusal Taramalı" msgid "Base pattern spacing" msgstr "Destek desen aralığı" -msgid "Spacing between support lines" -msgstr "Destek hatları arasındaki boşluk" +msgid "Spacing between support lines." +msgstr "Destek hatları arasındaki boşluk." msgid "Normal Support expansion" msgstr "Normal destek genişletmesi" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Normal desteğin yatay açıklığını genişletin (+) veya daraltın (-)" -msgid "Speed of support" -msgstr "Destek hızı" +msgid "Speed of support." +msgstr "Destek hızı." msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more " -"aggressively and save a lot of material (default organic), while hybrid style " -"will create similar structure to normal support under large flat overhangs." +"aggressively and save a lot of material (default organic), while hybrid " +"style will create similar structure to normal support under large flat " +"overhangs." msgstr "" -"Destek stil ve şekli. Normal destek için, destekleri düzenli bir ızgara içine " -"projelendirmek daha stabil destekler oluşturacaktır (varsayılan), aynı " +"Destek stil ve şekli. Normal destek için, destekleri düzenli bir ızgara " +"içine projelendirmek daha stabil destekler oluşturacaktır (varsayılan), aynı " "zamanda sıkı destek kuleleri malzeme tasarrufu sağlar ve nesne üzerindeki " "izleri azaltır.\n" "Ağaç destek için, ince ve organik tarz, dalları daha etkili bir şekilde " @@ -13275,9 +16308,15 @@ msgstr "" "Hybrid stil, büyük düz çıkıntıların altında normal destekle benzer bir yapı " "oluşturacaktır." +msgid "Default (Grid/Organic)" +msgstr "Varsayılan (Izgara/Organik)" + msgid "Snug" msgstr "Snug" +msgid "Organic" +msgstr "Organik" + msgid "Tree Slim" msgstr "İnce Ağaç" @@ -13287,15 +16326,12 @@ msgstr "Güçlü Ağaç" msgid "Tree Hybrid" msgstr "Hibrit Ağaç" -msgid "Organic" -msgstr "Organik" - msgid "Independent support layer height" msgstr "Bağımsız destek katmanı yüksekliği" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Destek katmanı, nesne katmanından bağımsız olarak katman yüksekliğini " @@ -13311,12 +16347,24 @@ msgid "" "threshold." msgstr "Eğim açısı eşiğin altında olan çıkmalar için destek oluşturulacaktır." +msgid "Threshold overlap" +msgstr "Eşik çakışması" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Eşik açısı sıfır ise örtüşmesi eşiğin altında olan çıkıntılar için destek " +"oluşturulacaktır. Bu değer ne kadar küçük olursa, desteksiz yazdırılabilecek " +"çıkıntı da o kadar dik olur." + msgid "Tree support branch angle" msgstr "Ağaç desteği dal açısı" msgid "" -"This setting determines the maximum overhang angle that t he branches of tree " -"support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "Bu ayar, ağaç desteğinin dallarının oluşmasına izin verilen maksimum çıkıntı " @@ -13348,10 +16396,11 @@ msgstr "Dal Yoğunluğu" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "" -"Adjusts the density of the support structure used to generate the tips of the " -"branches. A higher value results in better overhangs but the supports are " -"harder to remove, thus it is recommended to enable top support interfaces " -"instead of a high branch density value if dense interfaces are needed." +"Adjusts the density of the support structure used to generate the tips of " +"the branches. A higher value results in better overhangs but the supports " +"are harder to remove, thus it is recommended to enable top support " +"interfaces instead of a high branch density value if dense interfaces are " +"needed." msgstr "" "Dalların uçlarını oluşturmak için kullanılan destek yapısının yoğunluğunu " "ayarlar. Daha yüksek bir değer daha iyi çıkıntılarla sonuçlanır, ancak " @@ -13359,31 +16408,21 @@ msgstr "" "yüksek bir dal yoğunluğu değeri yerine üst destek arayüzlerinin " "etkinleştirilmesi önerilir." -msgid "Adaptive layer height" -msgstr "Uyarlanabilir katman yüksekliği" - -msgid "" -"Enabling this option means the height of tree support layer except the first " -"will be automatically calculated " -msgstr "" -"Bu seçeneğin etkinleştirilmesi, ilki hariç ağaç destek katmanının " -"yüksekliğinin otomatik olarak hesaplanacağı anlamına gelir " - msgid "Auto brim width" msgstr "Otomatik kenar genişliği" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" "Bu seçeneğin etkinleştirilmesi, ağaç desteğinin kenar genişliğinin otomatik " -"olarak hesaplanacağı anlamına gelir" +"olarak hesaplanacağı anlamına gelir." msgid "Tree support brim width" msgstr "Ağaç desteği kenar genişliği" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Ağaç dalından en dış kenar çizgisine kadar olan mesafe" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Ağaç dalından en dış kenar çizgisine kadar olan mesafe." msgid "Tip Diameter" msgstr "Uç Çapı" @@ -13413,89 +16452,147 @@ msgstr "" "dalların uzunlukları boyunca eşit kalınlığa sahip olmasına neden olacaktır. " "Birazcık açı organik desteğin stabilitesini artırabilir." -msgid "Branch Diameter with double walls" -msgstr "Çift duvarlı dal çapı" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no double " -"walls." -msgstr "" -"Bu çaptaki bir dairenin alanından daha büyük alana sahip dallar, stabilite " -"için çift duvarlı olarak basılacaktır. Çift duvar olmaması için bu değeri " -"sıfır olarak ayarlayın." - msgid "Support wall loops" msgstr "Destek duvarı döngüleri" -msgid "This setting specify the count of walls around support" -msgstr "Bu ayar desteğin etrafındaki duvarların sayısını belirtir" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Bu ayar [0,2] aralığındaki destek duvarlarının sayısını belirtir. 0 otomatik " +"anlamına gelir." msgid "Tree support with infill" msgstr "Dolgulu ağaç desteği" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Bu ayar, ağaç desteğinin büyük oyuklarının içine dolgu eklenip " -"eklenmeyeceğini belirtir" +"eklenmeyeceğini belirtir." + +msgid "Ironing Support Interface" +msgstr "Destek arayüzünü ütüle" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"Ütüleme, destek arayüzünün aynı yüksekliğine tekrar baskı yapmak için küçük " +"akış kullanır ve böylece daha pürüzsüz hale gelir. Bu ayar, destek " +"arayüzünün ütülenip ütülenmeyeceğini kontrol eder. Etkinleştirildiğinde, " +"destek arayüzü de katı olarak ekstrüde edilir." + +msgid "Support Ironing Pattern" +msgstr "Destek ütüleme deseni" + +msgid "Support Ironing flow" +msgstr "Destek ütüleme akışı" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"Ütüleme sırasında ekstrüde edilecek malzeme miktarı. Normal destek arayüzü " +"katman yüksekliğinin akışına göre. Çok yüksek bir değer, yüzeyde aşırı " +"ekstrüzyona neden olur." + +msgid "Support Ironing line spacing" +msgstr "Destek ütüleme satır aralığı" msgid "Activate temperature control" msgstr "Sıcaklık kontrolünü etkinleştirin" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Hazne sıcaklığı kontrolü için bu seçeneği etkinleştirin. Önce bir M191 komutu " -"eklenecek \"machine_start_gcode\"\n" -"G-code komut: M141/M191 S(0-255)" +"Otomatik hazne sıcaklığı kontrolü için bu seçeneği etkinleştirin. Bu " +"seçenek, “yazıcı başlangıç kodu”ndan önce bir M191 komutunun yayınlanmasını " +"etkinleştirir\n" +" oda sıcaklığını ayarlar ve bu sıcaklığa ulaşılıncaya kadar bekler. Ayrıca " +"baskı sonunda M141 komutu vererek varsa hazne ısıtıcısının kapatılmasını " +"sağlar.\n" +"\n" +"Bu seçenek, M191 ve M141 komutlarını makrolar aracılığıyla veya yerel olarak " +"destekleyen bellenime dayanır ve genellikle aktif bir oda ısıtıcısı " +"kurulduğunda kullanılır." msgid "Chamber temperature" msgstr "Bölme sıcaklığı" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Daha yüksek hazne sıcaklığı, eğrilmeyi bastırmaya veya azaltmaya yardımcı " -"olabilir ve ABS, ASA, PC, PA ve benzeri gibi yüksek sıcaklıktaki malzemeler " -"için potansiyel olarak daha yüksek ara katman yapışmasına yol açabilir Aynı " -"zamanda, ABS ve ASA'nın hava filtrasyonu daha da kötüleşecektir. PLA, PETG, " -"TPU, PVA ve diğer düşük sıcaklıktaki malzemeler için, tıkanmaları önlemek " -"için gerçek hazne sıcaklığı yüksek olmamalıdır, bu nedenle kapatma anlamına " -"gelen 0 şiddetle tavsiye edilir" +"ABS, ASA, PC ve PA gibi yüksek sıcaklıktaki malzemeler için daha yüksek bir " +"oda sıcaklığı, bükülmenin bastırılmasına veya azaltılmasına yardımcı " +"olabilir ve potansiyel olarak daha yüksek katmanlar arası bağlanma " +"mukavemetine yol açabilir. Ancak aynı zamanda daha yüksek oda sıcaklığı, ABS " +"ve ASA için hava filtreleme verimliliğini azaltacaktır.\n" +"\n" +"PLA, PETG, TPU, PVA ve diğer düşük sıcaklıktaki malzemeler için, ısı " +"kırılmasında malzemenin yumuşamasından kaynaklanan ekstrüderin tıkanmasını " +"önlemek için oda sıcaklığının düşük olması gerektiğinden bu seçenek devre " +"dışı bırakılmalıdır (0’a ayarlanmalıdır).\n" +"\n" +"Etkinleştirilirse, bu parametre aynı zamanda istenen oda sıcaklığını " +"yazdırma başlatma makronuza veya şuna benzer bir ısı emme makrosuna iletmek " +"için kullanılabilecek Chamber_temperature adlı bir gcode değişkenini de " +"ayarlar: PRINT_START (diğer değişkenler) CHAMBER_TEMP=[chamber_temperature]. " +"Yazıcınız M141/M191 komutlarını desteklemiyorsa veya aktif oda ısıtıcısı " +"takılı değilse yazdırma başlatma makrosunda ısı bekletme işlemini " +"gerçekleştirmek istiyorsanız bu yararlı olabilir." -msgid "Nozzle temperature for layers after the initial one" -msgstr "İlk katmandan sonraki katmanlar için nozul sıcaklığı" +msgid "Nozzle temperature for layers after the initial one." +msgstr "İlk katmandan sonraki katmanlar için nozul sıcaklığı." msgid "Detect thin wall" msgstr "İnce duvarı algıla" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "İki çizgi genişliğini içeremeyen ince duvarı tespit edin. Ve yazdırmak için " -"tek satır kullanın. Kapalı döngü olmadığından pek iyi basılmamış olabilir" +"tek satır kullanın. Kapalı döngü olmadığından pek iyi basılmamış olabilir." msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Bu gcode, takım değişimini tetiklemek için T komutu da dahil olmak üzere " -"filament değiştirildiğinde eklenir" +"filament değiştirildiğinde eklenir." -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "Bu gcode, ekstrüzyon rolü değiştirildiğinde eklenir" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "Bu gcode, ekstrüzyon rolü değiştirildiğinde eklenir." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " @@ -13504,8 +16601,8 @@ msgstr "" "Üst yüzeyler için çizgi genişliği. % olarak ifade edilirse Nozul çapı " "üzerinden hesaplanacaktır." -msgid "Speed of top surface infill which is solid" -msgstr "Sağlam üst yüzey dolgusunun hızı" +msgid "Speed of top surface infill which is solid." +msgstr "Sağlam üst yüzey dolgusunun hızı." msgid "Top shell layers" msgstr "Üst katmanlar" @@ -13513,11 +16610,11 @@ msgstr "Üst katmanlar" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Bu, üst yüzey katmanı da dahil olmak üzere üst kabuğun katı katmanlarının " "sayısıdır. Bu değerle hesaplanan kalınlık üst kabuk kalınlığından ince " -"olduğunda üst kabuk katmanları artırılacaktır" +"olduğunda üst kabuk katmanları ." msgid "Top solid layers" msgstr "Üst katı katmanlar" @@ -13529,48 +16626,77 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top shell " -"layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"Üst kabuk katmanları tarafından hesaplanan kalınlık bu değerden daha ince ise " -"dilimleme sırasında üst katı katmanların sayısı artırılır. Bu, katman " +"Üst kabuk katmanları tarafından hesaplanan kalınlık bu değerden daha ince " +"ise dilimleme sırasında üst katı katmanların sayısı artırılır. Bu, katman " "yüksekliği küçük olduğunda kabuğun çok ince olmasını önleyebilir. 0, bu " "ayarın devre dışı olduğu ve üst kabuğun kalınlığının kesinlikle üst kabuk " -"katmanları tarafından belirlendiği anlamına gelir" +"katmanları tarafından belirlendiği anlamına gelir." -msgid "Speed of travel which is faster and without extrusion" -msgstr "Daha hızlı ve ekstrüzyonsuz seyahat hızı" +msgid "Top surface density" +msgstr "Üst yüzey yoğunluğu" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Üst yüzey katmanının yoğunluğu. %100 değeri, tamamen sağlam ve pürüzsüz bir " +"üst katman oluşturur. Bu değerin düşürülmesi, seçilen üst yüzey desenine " +"göre dokulu bir üst yüzey elde edilmesini sağlar. %0 değeri ise yalnızca üst " +"katmandaki duvarların oluşturulmasını sağlar. Estetik veya işlevsel amaçlar " +"için tasarlanmıştır, aşırı ekstrüzyon gibi sorunları gidermek için değildir." + +msgid "Bottom surface density" +msgstr "Alt yüzey yoğunluğu" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Alt yüzey katmanının yoğunluğu. Estetik veya işlevsel amaçlar için " +"tasarlanmıştır, aşırı ekstrüzyon gibi sorunları gidermek için değildir.\n" +"UYARI: Bu değerin düşürülmesi, yatak yapışmasını olumsuz etkileyebilir." + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Daha hızlı ve ekstrüzyonsuz seyahat hızı." msgid "Wipe while retracting" msgstr "Geri çekme esnasında temizlik" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Nozul üzerinde sızan malzemeyi temizlemek için geri çekerken Nozulu son " "ekstrüzyon yolu boyunca hareket ettirin. Bu işlem yeni parça yazdırırken " -"damlamayı en aza indirebilir" +"damlamayı en aza indirebilir." msgid "Wipe Distance" msgstr "Temizleme mesafesi" msgid "" -"Discribe how long the nozzle will move along the last path when retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " -"extruder/filament retraction settings are, a retraction move may be needed to " -"retract the remaining filament. \n" +"extruder/filament retraction settings are, a retraction move may be needed " +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" "Geri çekilirken nozulun son yol boyunca ne kadar süre hareket edeceğini " -"açıklayın. \n" +"açıklayın.\n" "\n" -"Silme işleminin ne kadar sürdüğüne, ekstruder/filament geri çekme ayarlarının " -"ne kadar hızlı ve uzun olduğuna bağlı olarak, kalan filamanı geri çekmek için " -"bir geri çekme hareketine ihtiyaç duyulabilir. \n" +"Silme işleminin ne kadar sürdüğüne, ekstruder/filament geri çekme " +"ayarlarının ne kadar hızlı ve uzun olduğuna bağlı olarak, kalan filamanı " +"geri çekmek için bir geri çekme hareketine ihtiyaç duyulabilir.\n" "\n" "Aşağıdaki silme ayarından önce geri çekme miktarına bir değer ayarlamak, " "silme işleminden önce aşırı geri çekme işlemini gerçekleştirecektir, aksi " @@ -13585,6 +16711,12 @@ msgstr "" "nozul üzerindeki kalıntıları temizlemek ve nozul içindeki oda basıncını " "dengelemek için kullanılabilir." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Hacimlerin temizlenmesi" @@ -13604,15 +16736,20 @@ msgstr "Ana hacim" msgid "The volume of material to prime extruder on tower." msgstr "Kule üzerindeki ana ekstruder malzeme hacmi." -msgid "Width of prime tower" -msgstr "Prime tower genişliği" +msgid "Width of the prime tower." +msgstr "Prime tower genişliği." msgid "Wipe tower rotation angle" msgstr "Silme kulesi dönüş açısı" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "X eksenine göre silme kulesi dönüş açısı." +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "Stabilizasyon konisi tepe açısı" @@ -13620,14 +16757,8 @@ msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Silme kulesini stabilize etmek için kullanılan koninin tepe noktasındaki açı. " -"Daha büyük açı daha geniş taban anlamına gelir." - -msgid "Wipe tower purge lines spacing" -msgstr "Silme kulesi temizleme hatları aralığı" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Silme kulesindeki boşaltma hatlarının aralığı." +"Silme kulesini stabilize etmek için kullanılan koninin tepe noktasındaki " +"açı. Daha büyük açı daha geniş taban anlamına gelir." msgid "Maximum wipe tower print speed" msgstr "Maksimum silme kulesi yazdırma hızı" @@ -13646,7 +16777,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13673,8 +16804,47 @@ msgstr "" "Silme kulesi dış çevreleri için bu ayardan bağımsız olarak iç çevre hızı " "kullanılır." -msgid "Wipe tower extruder" -msgstr "Silme kulesi ekstruderi" +msgid "Wall type" +msgstr "Duvar tipi" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Silme kulesi dış duvar tipi.\n" +"1. Dikdörtgen: Varsayılan duvar tipi, sabit genişlik ve yüksekliğe sahip bir " +"dikdörtgendir.\n" +"2. Koni: Silme kulesinin sabitlenmesine yardımcı olmak için alt kısmında bir " +"fileto bulunan bir koni.\n" +"3. Kaburga: Kule duvarına gelişmiş denge için dört kaburga ekler." + +msgid "Extra rib length" +msgstr "Ekstra rib uzunluğu" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Pozitif değerler rib duvarının boyutunu artırabilirken, negatif değerler " +"boyutunu azaltabilir. Ancak rib duvarının boyutu temizleme hacmi tarafından " +"belirlenen boyuttan daha küçük olamaz." + +msgid "Rib width" +msgstr "Rib genişliği" + +msgid "Rib width." +msgstr "Kiriş genişliği" + +msgid "Fillet wall" +msgstr "Kavisli duvar" + +msgid "The wall of prime tower will fillet." +msgstr "Temizleme kulesinin duvarı yuvarlatılacaktır." msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -13692,8 +16862,20 @@ msgid "" "volumes below." msgstr "" "Bu vektör, silme kulesinde kullanılan her bir araçtan/araca geçiş için " -"gerekli hacimleri kaydeder. Bu değerler, aşağıdaki tam temizleme hacimlerinin " -"oluşturulmasını basitleştirmek için kullanılır." +"gerekli hacimleri kaydeder. Bu değerler, aşağıdaki tam temizleme " +"hacimlerinin oluşturulmasını basitleştirmek için kullanılır." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13717,13 +16899,13 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed as " -"a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"Bu nesne, filamentten tasarruf etmek ve baskı süresini azaltmak için filament " -"değişiminden sonra nozulu temizlemek için kullanılacaktır. Sonuç olarak " -"nesnelerin renkleri karıştırılacaktır. Prime tower etkinleştirilmediği sürece " -"etkili olmayacaktır." +"Bu nesne, filamentten tasarruf etmek ve baskı süresini azaltmak için " +"filament değişiminden sonra nozulu temizlemek için kullanılacaktır. Sonuç " +"olarak nesnelerin renkleri karıştırılacaktır. Prime tower " +"etkinleştirilmediği sürece etkili olmayacaktır." msgid "Maximal bridging distance" msgstr "Maksimum köprüleme mesafesi" @@ -13732,35 +16914,66 @@ msgid "Maximal distance between supports on sparse infill sections." msgstr "" "Bu nesne, filamentten tasarruf etmek ve baskı süresini azaltmak için bir " "filament değişiminden sonra nozulu temizlemek için kullanılacaktır. Sonuç " -"olarak nesnelerin renkleri karıştırılacaktır. Prime tower etkinleştirilmediği " -"sürece etkili olmayacaktır." +"olarak nesnelerin renkleri karıştırılacaktır. Prime tower " +"etkinleştirilmediği sürece etkili olmayacaktır." -msgid "X-Y hole compensation" -msgstr "X-Y delik dengeleme" +msgid "Wipe tower purge lines spacing" +msgstr "Silme kulesi temizleme hatları aralığı" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Silme kulesindeki boşaltma hatlarının aralığı." + +msgid "Extra flow for purging" +msgstr "Temizleme için ekstra akış" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Silme kulesindeki temizleme hatları için ekstra akış kullanılır. Bu, " +"temizleme hatlarının normalde olduğundan daha kalın veya daha dar olmasına " +"neden olur. Aralık otomatik olarak ayarlanır." + +msgid "Idle temperature" +msgstr "Boşta sıcaklık" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Alet şu anda çoklu alet kurulumlarında kullanılmadığında püskürtme ucu " +"sıcaklığı. Bu yalnızca Yazdırma Ayarlarında ‘Sızıntı önleme’ etkin olduğunda " +"kullanılır. Devre dışı bırakmak için 0’a ayarlayın." + +msgid "X-Y hole compensation" +msgstr "X-Y delik telafisi" + +msgid "" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Nesnenin delikleri XY düzleminde yapılandırılan değer kadar büyütülür veya " "küçültülür. Pozitif değer delikleri büyütür. Negatif değer delikleri " "küçültür. Bu fonksiyon, nesnenin montaj sorunu olduğunda boyutu hafifçe " -"ayarlamak için kullanılır" +"ayarlamak için kullanılır." msgid "X-Y contour compensation" msgstr "X-Y kontur telafisi" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Nesnenin konturu XY düzleminde yapılandırılan değer kadar büyütülür veya " -"küçültülür. Pozitif değer konturu büyütür. Negatif değer konturu küçültür. Bu " -"fonksiyon, nesnenin montaj sorunu olduğunda boyutu hafifçe ayarlamak için " -"kullanılır" +"küçültülür. Pozitif değer konturu büyütür. Negatif değer konturu küçültür. " +"Bu fonksiyon, nesnenin montaj sorunu olduğunda boyutu hafifçe ayarlamak için " +"kullanılır." msgid "Convert holes to polyholes" msgstr "Delikleri çokgen deliklere dönüştür" @@ -13783,14 +16996,14 @@ msgstr "Çokgen delik tespiti marjı" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to broaden " -"the detection.\n" +"be on the circle circumference. This setting allows you some leeway to " +"broaden the detection.\n" "In mm or in % of the radius." msgstr "" "Bir noktanın dairenin tahmini yarıçapına göre maksimum sapması.\n" "Silindirler genellikle farklı boyutlarda üçgenler olarak ihraç edildiğinden, " -"noktalar daire çevresinde olmayabilir. Bu ayar, algılamayı genişletmeniz için " -"size biraz alan sağlar.\n" +"noktalar daire çevresinde olmayabilir. Bu ayar, algılamayı genişletmeniz " +"için size biraz alan sağlar.\n" "inc mm cinsinden veya yarıçapın %'si cinsinden." msgid "Polyhole twist" @@ -13800,7 +17013,7 @@ msgid "Rotate the polyhole every layer." msgstr "Çokgeni her katmanda döndürün." msgid "G-code thumbnails" -msgstr "G-kodu küçük resimleri" +msgstr "G-code önizleme resimleri" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " @@ -13813,20 +17026,20 @@ msgid "Format of G-code thumbnails" msgstr "G kodu küçük resimlerinin formatı" msgid "" -"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI " -"for low memory firmware" +"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " +"QOI for low memory firmware." msgstr "" "G kodu küçük resimlerinin formatı: En iyi kalite için PNG, en küçük boyut " -"için JPG, düşük bellekli donanım yazılımı için QOI" +"için JPG, düşük bellekli donanım yazılımı için QOI." msgid "Use relative E distances" msgstr "Göreceli (relative) E mesafelerini kullan" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "\"label_objects\" seçeneği kullanılırken göreceli ekstrüzyon önerilir. Bazı " "ekstrüderler bu seçenek işaretlenmediğinde daha iyi çalışır (mutlak " @@ -13835,15 +17048,12 @@ msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " -"very thin areas is used gap-fill. Arachne engine produces walls with variable " -"extrusion width" +"very thin areas is used gap-fill. Arachne engine produces walls with " +"variable extrusion width." msgstr "" -"Klasik duvar oluşturucu sabit ekstrüzyon genişliğine sahip duvarlar üretir ve " -"çok ince alanlar için boşluk doldurma kullanılır. Arachne motoru değişken " -"ekstrüzyon genişliğine sahip duvarlar üretir" - -msgid "Classic" -msgstr "Klasik" +"Klasik duvar oluşturucu sabit ekstrüzyon genişliğine sahip duvarlar üretir " +"ve çok ince alanlar için boşluk doldurma kullanılır. Arachne motoru değişken " +"ekstrüzyon genişliğine sahip duvarlar üretir." msgid "Arachne" msgstr "Arachne" @@ -13854,11 +17064,11 @@ msgstr "Duvar geçiş uzunluğu" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "Parça inceldikçe farklı sayıdaki duvarlar arasında geçiş yaparken, duvar " "parçalarını bölmek veya birleştirmek için belirli bir miktar alan ayrılır. " -"Nozul çapına göre yüzde olarak ifade edilir" +"Nozul çapına göre yüzde olarak ifade edilir." msgid "Wall transitioning filter margin" msgstr "Duvar geçiş filtresi oranı" @@ -13866,19 +17076,20 @@ msgstr "Duvar geçiş filtresi oranı" msgid "" "Prevent transitioning back and forth between one extra wall and one less. " "This margin extends the range of extrusion widths which follow to [Minimum " -"wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin " -"reduces the number of transitions, which reduces the number of extrusion " -"starts/stops and travel time. However, large extrusion width variation can " -"lead to under- or overextrusion problems. It's expressed as a percentage over " -"nozzle diameter" +"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " +"margin reduces the number of transitions, which reduces the number of " +"extrusion starts/stops and travel time. However, large extrusion width " +"variation can lead to under- or overextrusion problems. It's expressed as a " +"percentage over nozzle diameter." msgstr "" -"Fazladan bir duvar ile bir eksik arasında ileri geri geçişi önleyin. Bu kenar " -"boşluğu, [Minimum duvar genişliği - kenar boşluğu, 2 * Minimum duvar " +"Fazladan bir duvar ile bir eksik arasında ileri geri geçişi önleyin. Bu " +"kenar boşluğu, [Minimum duvar genişliği - kenar boşluğu, 2 * Minimum duvar " "genişliği + kenar boşluğu] şeklinde takip eden ekstrüzyon genişlikleri " "aralığını genişletir. Bu marjın arttırılması geçiş sayısını azaltır, bu da " "ekstrüzyonun başlama/durma sayısını ve seyahat süresini azaltır. Bununla " -"birlikte, büyük ekstrüzyon genişliği değişimi, yetersiz veya aşırı ekstrüzyon " -"sorunlarına yol açabilir. Nozul çapına göre yüzde olarak ifade edilir" +"birlikte, büyük ekstrüzyon genişliği değişimi, yetersiz veya aşırı " +"ekstrüzyon sorunlarına yol açabilir. Nozul çapına göre yüzde olarak ifade " +"edilir." msgid "Wall transitioning threshold angle" msgstr "Duvar geçiş açısı" @@ -13888,37 +17099,37 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"Çift ve tek sayıdaki duvarlar arasında geçişler ne zaman oluşturulmalıdır? Bu " -"ayardan daha büyük bir açıya sahip bir kama şeklinin geçişleri olmayacak ve " -"kalan alanı dolduracak şekilde ortada hiçbir duvar basılmayacaktır. Bu ayarın " -"düşürülmesi, bu merkez duvarların sayısını ve uzunluğunu azaltır ancak " -"boşluklara veya aşırı çıkıntıya neden olabilir" +"Çift ve tek sayıdaki duvarlar arasında geçişler ne zaman oluşturulmalıdır? " +"Bu ayardan daha büyük bir açıya sahip bir kama şeklinin geçişleri olmayacak " +"ve kalan alanı dolduracak şekilde ortada hiçbir duvar basılmayacaktır. Bu " +"ayarın düşürülmesi, bu merkez duvarların sayısını ve uzunluğunu azaltır " +"ancak boşluklara veya aşırı çıkıntıya neden olabilir." msgid "Wall distribution count" msgstr "Duvar dağılım sayısı" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Varyasyonun yayılması gereken, merkezden sayılan duvar sayısı. Daha düşük " -"değerler, dış duvarların genişliğinin değişmediği anlamına gelir" +"değerler, dış duvarların genişliğinin değişmediği anlamına gelir." msgid "Minimum feature size" msgstr "Minimum özellik boyutu" msgid "" -"Minimum thickness of thin features. Model features that are thinner than this " -"value will not be printed, while features thicker than the Minimum feature " -"size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"Minimum thickness of thin features. Model features that are thinner than " +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"İnce özellikler için minimum kalınlık. Bu değerden daha ince olan model " -"özellikleri yazdırılmayacak, Minimum özellik boyutundan daha kalın olan " -"özellikler ise Minimum duvar genişliğine genişletilecektir. Nozul çapı " -"üzerinden yüzde olarak ifade edilir" +"Modeldeki ince özelliklerin minimum kalınlığı. Bu değerden daha ince olan " +"model detayları basılmayacak, bu değerden daha kalın olan detaylar ise " +"minimum duvar kalınlığına kadar genişletilecektir. Değer, nozul çapı " +"üzerinden yüzde olarak verilir." msgid "Minimum wall length" msgstr "Minimum duvar uzunluğu" @@ -13928,28 +17139,29 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " -"Advanced settings below to adjust the sensitivity of what is considered a top-" -"surface. 'One wall threshold' is only visibile if this setting is set above " -"the default value of 0.5, or if single-wall top surfaces is enabled." +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " +"Advanced settings below to adjust the sensitivity of what is considered a " +"top-surface. 'One wall threshold' is only visible if this setting is set " +"above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Yazdırma süresini artırabilecek kısa, kapatılmamış duvarların yazdırılmasını " "önlemek için bu değeri ayarlayın. Daha yüksek değerler daha fazla ve daha " "uzun duvarları kaldırır.\n" "\n" -"NOT: Modelin dış kısmında görsel boşluk kalmaması için alt ve üst yüzeyler bu " -"değerden etkilenmeyecektir. Üst yüzey olarak kabul edilen şeyin hassasiyetini " -"ayarlamak için aşağıdaki Gelişmiş ayarlarda 'Tek duvar eşiği'ni ayarlayın. " -"'Tek duvar eşiği' yalnızca bu ayar varsayılan değer olan 0,5'in üzerine " -"ayarlandığında veya tek duvarlı üst yüzeyler etkinleştirildiğinde görünür." +"NOT: Modelin dış kısmında görsel boşluk kalmaması için alt ve üst yüzeyler " +"bu değerden etkilenmeyecektir. Üst yüzey olarak kabul edilen şeyin " +"hassasiyetini ayarlamak için aşağıdaki Gelişmiş ayarlarda 'Tek duvar " +"eşiği'ni ayarlayın. 'Tek duvar eşiği' yalnızca bu ayar varsayılan değer olan " +"0,5'in üzerine ayarlandığında veya tek duvarlı üst yüzeyler " +"etkinleştirildiğinde görünür." msgid "First layer minimum wall width" msgstr "İlk katman minimum duvar genişliği" msgid "" -"The minimum wall width that should be used for the first layer is recommended " -"to be set to the same size as the nozzle. This adjustment is expected to " -"enhance adhesion." +"The minimum wall width that should be used for the first layer is " +"recommended to be set to the same size as the nozzle. This adjustment is " +"expected to enhance adhesion." msgstr "" "İlk katman için kullanılması gereken minimum duvar genişliğinin nozul ile " "aynı boyuta ayarlanması tavsiye edilir. Bu ayarlamanın yapışmayı artırması " @@ -13962,20 +17174,20 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Modelin ince özelliklerinin yerini alacak duvarın genişliği (Minimum özellik " "boyutuna göre). Minimum duvar genişliği özelliğin kalınlığından daha inceyse " "duvar, özelliğin kendisi kadar kalın olacaktır. Nozul çapına göre yüzde " -"olarak ifade edilir" +"olarak ifade edilir." msgid "Detect narrow internal solid infill" msgstr "Dar iç katı dolguyu tespit et" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. Otherwise, " -"rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "Bu seçenek dar dahili katı dolgu alanını otomatik olarak algılayacaktır. " "Etkinleştirilirse, yazdırmayı hızlandırmak amacıyla alanda eşmerkezli desen " @@ -13993,45 +17205,246 @@ msgstr "çok büyük çizgi genişliği " msgid " not in range " msgstr " aralıkta değil " +msgid "Export 3MF" +msgstr "3MF'yi dışa aktar" + +msgid "Export project as 3MF." +msgstr "Projeyi 3MF olarak dışa aktarın." + +msgid "Export slicing data" +msgstr "Dilimleme verilerini dışa aktar" + +msgid "Export slicing data to a folder." +msgstr "Dilimleme verilerini bir klasöre aktarın." + +msgid "Load slicing data" +msgstr "Dilimleme verilerini yükle" + +msgid "Load cached slicing data from directory." +msgstr "Önbelleğe alınmış dilimleme verilerini dizinden yükle." + +msgid "Export STL" +msgstr "STL'yi dışa aktar" + +msgid "Export the objects as single STL." +msgstr "Nesneleri tek STL olarak dışa aktarın." + +msgid "Export multiple STLs" +msgstr "Birden çok STL’yi dışa aktar" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Nesneleri birden fazla STL olarak dizine aktarın." + +msgid "Slice" +msgstr "Dilimle" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Plakaları dilimleyin: 0-tüm plakalar, i-plaka i, diğerleri-geçersiz" + +msgid "Show command help." +msgstr "Komut yardımını göster." + +msgid "UpToDate" +msgstr "Güncel" + +msgid "Update the config values of 3MF to latest." +msgstr "3mf'nin yapılandırma değerlerini en son sürüme güncelleyin." + +msgid "downward machines check" +msgstr "düşüşte olan makineleri kontrol et" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"mevcut makinenin listedeki makinelerle uyumlu olup olmadığını kontrol edin." + +msgid "Load default filaments" +msgstr "Varsayılan filamentleri yükle" + +msgid "Load first filament as default for those not loaded." +msgstr "Yüklenmeyenler için ilk filamenti varsayılan olarak yükleyin." + msgid "Minimum save" msgstr "Minimum tasarruf" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "3mf'yi minimum boyutta dışa aktarın." +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "dilimleme için plaka başına maksimum üçgen sayısı." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "saniye cinsinden plaka başına maksimum dilimleme süresi." + msgid "No check" msgstr "Kontrol yok" -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Gcode yol çakışmaları kontrolü gibi herhangi bir geçerlilik kontrolü " "çalıştırmayın." +msgid "Normative check" +msgstr "Normatif kontrol" + +msgid "Check the normative items." +msgstr "Normatif maddeleri kontrol edin." + +msgid "Output Model Info" +msgstr "Çıktı Model Bilgileri" + +msgid "Output the model's information." +msgstr "Modelin bilgilerini çıktıla." + +msgid "Export Settings" +msgstr "Dışa Aktarma Ayarları" + +msgid "Export settings to a file." +msgstr "Ayarları bir dosyaya aktarın." + +msgid "Send progress to pipe" +msgstr "İlerlemeyi kanala gönder" + +msgid "Send progress to pipe." +msgstr "İlerlemeyi boruya gönder." + +msgid "Arrange Options" +msgstr "Hizalama Seçenekleri" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "" +"Hizalama seçenekleri: 0-devre dışı bırak, 1-etkinleştir, diğer-otomatik" + +msgid "Repetition count" +msgstr "Tekrar sayısı" + +msgid "Repetition count of the whole model." +msgstr "Tüm modelin tekrar sayısı." + msgid "Ensure on bed" msgstr "Baskı yatağında olduğundan emin olun" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Kısmen aşağıda olduğunda nesneyi yatağın üzerine kaldırın. Varsayılan olarak " -"devre dışı" +"devre dışı." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Tedarik edilen modelleri bir plaka içinde düzenleyin ve bir kez işlem yapmak " +"için bunları tek bir modelde birleştirin." + +msgid "Convert Unit" +msgstr "Birimi Dönüştür" + +msgid "Convert the units of model." +msgstr "Modelin birimlerini dönüştür." msgid "Orient Options" msgstr "Yönlendirme Seçenekleri" msgid "Orient options: 0-disable, 1-enable, others-auto" msgstr "" -"Yönlendirme seçenekleri: 0-devre dışı bırak, 1-etkinleştir, diğerleri-otomatik" +"Yönlendirme seçenekleri: 0-devre dışı bırak, 1-etkinleştir, diğerleri-" +"otomatik" msgid "Rotation angle around the Z axis in degrees." msgstr "Z ekseni etrafında derece cinsinden dönüş açısı." +msgid "Rotate around X" +msgstr "X etrafında döndür" + +msgid "Rotation angle around the X axis in degrees." +msgstr "X ekseni etrafında derece cinsinden dönüş açısı." + msgid "Rotate around Y" msgstr "Y etrafında döndür" msgid "Rotation angle around the Y axis in degrees." msgstr "Y ekseni etrafında derece cinsinden dönüş açısı." +msgid "Scale the model by a float factor." +msgstr "Modeli kayan nokta faktörüne göre ölçeklendirin." + +msgid "Load General Settings" +msgstr "Genel Ayarları Yükle" + +msgid "Load process/machine settings from the specified file." +msgstr "Belirtilen dosyadan işlem/yazıcı ayarlarını yükleyin." + +msgid "Load Filament Settings" +msgstr "Filament Ayarlarını Yükle" + +msgid "Load filament settings from the specified file list." +msgstr "Filament ayarlarını belirtilen dosya listesinden yükleyin." + +msgid "Skip Objects" +msgstr "Nesneleri Atla" + +msgid "Skip some objects in this print." +msgstr "Bu baskıdaki bazı nesneleri atla." + +msgid "Clone Objects" +msgstr "Nesneleri Klonla" + +msgid "Clone objects in the load list." +msgstr "Yükleme listesindeki nesneleri klonlama." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" +"Güncel olan bir baskı süreci (process) veya makine (printer) profili " +"seçildiğinde, ona ait en güncel ayarları otomatik olarak yükle" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Güncellemeyi kullanırken belirtilen dosyadan güncel işlem/yazıcı ayarlarını " +"yükle." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" +"Güncel olan bir filament profili kullanırken, onun en güncel ayarlarını yükle" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Güncellemeyi kullanırken belirtilen dosyadan güncel filament ayarlarını " +"yükle." + +msgid "Downward machines check" +msgstr "Aşağı doğru makine kontrolü" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Etkinleştirilirse mevcut makinenin listedeki makinelerle uyumlu olup " +"olmadığını kontrol edin." + +msgid "downward machines settings" +msgstr "Aşağı doğru makine ayarları" + +msgid "The machine settings list needs to do downward checking." +msgstr "Makine ayarları listesinin aşağı doğru kontrol yapması gerekiyor." + +msgid "Load assemble list" +msgstr "Montaj listesini yükle" + +msgid "Load assemble object list from config file." +msgstr "Montaj nesne listesini yapılandırma dosyasından yükle." + msgid "Data directory" msgstr "Veri dizini" @@ -14044,43 +17457,154 @@ msgstr "" "veya bir ağ depolama birimindeki yapılandırmaları dahil etmek için " "kullanışlıdır." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Çıkış dizini" + +msgid "Output directory for the exported files." +msgstr "Dışa aktarılan dosyalar için çıkış dizini." + +msgid "Debug level" +msgstr "Hata ayıklama düzeyi" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Hata ayıklama günlüğü düzeyini ayarlar. 0:önemli, 1:hata, 2:uyarı, 3:bilgi, " +"4:hata ayıklama, 5:izleme\n" + +msgid "Enable timelapse for print" +msgstr "Yazdırma için hızlandırılmış çekimi etkinleştir" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "" +"Etkinleştirilirse, bu dilimleme hızlandırılmış çekim kullanılarak " +"değerlendirilecektir." + +msgid "Load custom G-code" msgstr "Özel gcode yükle" -msgid "Load custom gcode from json" -msgstr "Json'dan özel gcode yükleyin" +msgid "Load custom G-code from json." +msgstr "Json'dan özel gcode yükleyin." -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "Filament kimliklerini yükle" + +msgid "Load filament IDs for each object." +msgstr "Her nesne için filament kimliklerini yükleyin." + +msgid "Allow multiple colors on one plate" +msgstr "Bir plaka üzerinde birden fazla renge izin verin" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Etkinleştirilirse, düzenleme bir plaka üzerinde birden fazla renge izin " +"verecektir." + +msgid "Allow rotation when arranging" +msgstr "Düzenlerken rotasyonlara izin ver" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "" +"Etkinleştirilirse düzenleme, nesne yerleştirildiğinde dönüşlere izin verir." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Düzenleme yaparken ekstrüzyon kalibrasyon bölgesinden kaçının" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Etkinleştirilirse, nesne yerleştirildiğinde düzenleme ekstrüzyon kalibrasyon " +"bölgesini önleyecektir." + +#, fuzzy +msgid "Skip modified G-code in 3MF" +msgstr "3mf’de değiştirilmiş gcode’ları atla" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Yazıcı veya filament Ön Ayarlarından 3mf’deki değiştirilmiş gcode’ları " +"atlayın." + +msgid "MakerLab name" +msgstr "MakerLab adı" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "Bu 3mf’yi oluşturmak için MakerLab adı." + +msgid "MakerLab version" +msgstr "MakerLab version" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "Bu 3mf’yi oluşturmak için MakerLab sürümü." + +msgid "Metadata name list" +msgstr "meta veri adı listesi" + +#, fuzzy +msgid "Metadata name list added into 3MF." +msgstr "3mf’ye meta veri adı listesi eklendi." + +msgid "Metadata value list" +msgstr "meta veri değer listesi" + +#, fuzzy +msgid "Metadata value list added into 3MF." +msgstr "3mf’ye meta veri değeri listesi eklendi." + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced" +msgstr "Daha yeni sürümle 3mf'nin dilimlenmesine izin verin" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced." +msgstr "Daha yeni sürüme sahip 3mf’nin dilimlenmesine izin ver." + +msgid "Current Z-hop" msgstr "Mevcut z-hop" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Özel G kodu bloğunun başında bulunan z-hop'u içerir." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Ekstruderin özel G kodu bloğunun başlangıcındaki konumu. Özel G kodu başka " "bir yere seyahat ederse, Slicer'ın kontrolü geri aldığında nereden seyahat " "ettiğini bilmesi için bu değişkene yazması gerekir." msgid "" -"Retraction state at the beginning of the custom G-code block. If the custom G-" -"code moves the extruder axis, it should write to this variable so PrusaSlicer " -"deretracts correctly when it gets control back." +"Retraction state at the beginning of the custom G-code block. If the custom " +"G-code moves the extruder axis, it should write to this variable so " +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Özel G kodu bloğunun başlangıcındaki geri çekilme durumu. Özel G kodu " -"ekstruder eksenini hareket ettirirse, Slicer'ın kontrolü geri aldığında doğru " -"şekilde geri çekme yapması için bu değişkene yazması gerekir." +"ekstruder eksenini hareket ettirirse, Slicer'ın kontrolü geri aldığında " +"doğru şekilde geri çekme yapması için bu değişkene yazması gerekir." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Ekstra deretraksiyon" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "" "Şu anda, geri çekilmeden sonra ekstra ekstruder hazırlaması planlanıyor." +msgid "Absolute E position" +msgstr "Mutlak E konumu" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Ekstruder ekseninin mevcut konumu. Yalnızca mutlak ekstruder adreslemeyle " +"kullanılır." + msgid "Current extruder" msgstr "Mevcut ekstruder" @@ -14113,7 +17637,7 @@ msgstr "" "aynı." msgid "Initial tool" -msgstr "Başlangıç ​​aracı" +msgstr "Başlangıç aracı" msgid "" "Zero-based index of the first extruder used in the print. Same as " @@ -14125,11 +17649,18 @@ msgstr "" msgid "Is extruder used?" msgstr "Ekstruder kullanılıyor mu?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Belirli bir ekstruderin baskıda kullanılıp kullanılmadığını belirten bool " "vektörü." +msgid "Has single extruder MM priming" +msgstr "Tek ekstruder MM astarına sahiptir" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "Bu baskıda ekstra çok malzemeli astarlama bölgeleri kullanılıyor mu?" + msgid "Volume per extruder" msgstr "Ekstruder başına hacim" @@ -14138,10 +17669,10 @@ msgstr "" "Baskının tamamı boyunca ekstruder başına ekstrüzyona tabi tutulan toplam " "filament hacmi." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Toplam takım değişiklikleri" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Yazdırma sırasındaki takım değişikliği sayısı." msgid "Total volume" @@ -14157,18 +17688,18 @@ msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." msgstr "" -"Baskının tamamı boyunca ekstrüzyon yapılan ekstruder başına ağırlık. Filament " -"Ayarlarındaki filaman yoğunluğu değerinden hesaplanır." +"Baskının tamamı boyunca ekstrüzyon yapılan ekstruder başına ağırlık. " +"Filament Ayarlarındaki filaman yoğunluğu değerinden hesaplanır." msgid "Total weight" msgstr "Toplam ağırlık" msgid "" -"Total weight of the print. Calculated from filament_density value in Filament " -"Settings." +"Total weight of the print. Calculated from filament_density value in " +"Filament Settings." msgstr "" -"Baskının toplam ağırlığı. Filament Ayarlarındaki filaman yoğunluğu değerinden " -"hesaplanır." +"Baskının toplam ağırlığı. Filament Ayarlarındaki filaman yoğunluğu " +"değerinden hesaplanır." msgid "Total layer count" msgstr "Toplam katman sayısı" @@ -14197,12 +17728,12 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Bireysel nesnelere hangi ölçeklendirmenin uygulandığına ilişkin bilgileri " "içeren bir dize içerir. Nesnelerin indekslenmesi sıfır tabanlıdır (ilk " "nesnenin indeksi 0'dır).\n" -"Örnek: 'x:100% y:50% z:100'." +"Örnek: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Uzantı olmadan dosya adını girin" @@ -14210,15 +17741,17 @@ msgstr "Uzantı olmadan dosya adını girin" msgid "Source filename of the first object, without extension." msgstr "İlk nesnenin kaynak dosya adı, uzantısız." +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" "Vektörün iki öğesi vardır: noktanın x ve y koordinatı. Değerler mm " "cinsindendir." +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values in " -"mm." +"The vector has two elements: X and Y dimension of the bounding box. Values " +"in mm." msgstr "" "Vektörün iki öğesi vardır: sınırlayıcı kutunun x ve y boyutu. Değerler mm " "cinsindendir." @@ -14230,8 +17763,8 @@ msgid "" "Vector of points of the first layer convex hull. Each element has the " "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" -"Birinci katmanın dışbükey gövdesinin noktalarının vektörü. Her öğe şu formata " -"sahiptir:'[x, y]' (x ve y, mm cinsinden kayan noktalı sayılardır)." +"Birinci katmanın dışbükey gövdesinin noktalarının vektörü. Her öğe şu " +"formata sahiptir:'[x, y]' (x ve y, mm cinsinden kayan noktalı sayılardır)." msgid "Bottom-left corner of first layer bounding box" msgstr "İlk katman sınırlayıcı kutusunun sol alt köşesi" @@ -14266,6 +17799,9 @@ msgstr "Saat" msgid "Minute" msgstr "Dakika" +msgid "Second" +msgstr "Saniye" + msgid "Print preset name" msgstr "Ön ayar adını yazdır" @@ -14294,13 +17830,23 @@ msgstr "Fiziksel yazıcı adı" msgid "Name of the physical printer used for slicing." msgstr "Dilimleme için kullanılan fiziksel yazıcının adı." +msgid "Number of extruders" +msgstr "Ekstruder sayısı" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Geçerli baskıda kullanılıp kullanılmadığına bakılmaksızın ekstrüderlerin " +"toplam sayısı." + msgid "Layer number" msgstr "Katman numarası" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Geçerli katmanın dizini. Tek tabanlı (yani ilk katman 1 numaradır)." -msgid "Layer z" +msgid "Layer Z" msgstr "Z katmanı" msgid "" @@ -14310,7 +17856,7 @@ msgstr "" "Geçerli katmanın baskı yatağı üzerindeki yüksekliği, katmanın tepesine kadar " "ölçülür." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Maksimum katman z" msgid "Height of the last layer above the print bed." @@ -14337,9 +17883,6 @@ msgstr "Dolgu takım yolu oluşturma" msgid "Detect overhangs for auto-lift" msgstr "Otomatik kaldırma için çıkıntıları tespit edin" -msgid "Generating support" -msgstr "Destek oluşturma" - msgid "Checking support necessity" msgstr "Destek gerekliliğinin kontrol edilmesi" @@ -14360,6 +17903,9 @@ msgstr "" "Görünüşe göre %s nesnesinde %s var. Lütfen nesneyi yeniden yönlendirin veya " "destek oluşturmayı etkinleştirin." +msgid "Generating support" +msgstr "Destek oluşturma" + msgid "Optimizing toolpath" msgstr "Takım yolunu optimize etme" @@ -14376,42 +17922,35 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Bir nesnenin XY boyutu telafisi , aynı zamanda renkli boyalı olduğundan " "kullanılmayacaktır.\n" "XY Boyut telafisi renkli boyamayla birleştirilemez." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Destek: %d katmanında takım yolu oluştur" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Bir nesne, XY Boyut Telafisini (XY Size Compensation) etkinleştirmiş, ancak " +"bu kullanılmayacak çünkü aynı zamanda pütürlü yüzey (Fuzzy Skin) uygulanmış. " +"XY Boyut Telafisi, Fuzzy Skin ile birlikte kullanılamaz." -msgid "Support: detect overhangs" -msgstr "Destek: çıkıntıları tespit et" +msgid "Object name" +msgstr "Nesne adı" msgid "Support: generate contact points" msgstr "Destek: iletişim noktaları oluştur" -msgid "Support: propagate branches" -msgstr "Destek: dal şeklinde oluştur" +msgid "Loading of a model file failed." +msgstr "Model dosyasının yüklenmesi başarısız oldu." -msgid "Support: draw polygons" -msgstr "Destek: çokgen çizme" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Destek: takım yolu oluştur" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Destek: %d katmanında çokgenler oluşturma" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Destek: %d katmanındaki delikleri düzeltin" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Destek: %d katmanındaki dalları çoğalt" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Sağlanan dosya boş olduğundan okunamadı" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14419,18 +17958,10 @@ msgstr "" "Bilinmeyen dosya formatı. Giriş dosyası .stl, .obj, .amf(.xml) uzantılı " "olmalıdır." -msgid "Loading of a model file failed." -msgstr "Model dosyasının yüklenmesi başarısız oldu." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Sağlanan dosya boş olduğundan okunamadı" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Bilinmeyen dosya formatı. Giriş dosyası .3mf veya .zip.amf uzantılı olmalıdır." - -msgid "Canceled" -msgstr "İptal edildi" +"Bilinmeyen dosya formatı. Giriş dosyası .3mf veya .zip.amf uzantılı " +"olmalıdır." msgid "load_obj: failed to parse" msgstr "load_obj: ayrıştırılamadı" @@ -14522,7 +18053,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Lütfen geçerli değerleri girin:\n" "Başlangıç değeri: >= %.1f\n" @@ -14534,7 +18065,7 @@ msgid "The name cannot be empty." msgstr "Ad boş olamaz." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Seçilen ön ayar: %s bulunamadı." msgid "The name cannot be the same as the system preset name." @@ -14546,10 +18077,19 @@ msgstr "Ad, mevcut başka bir ön ayar adıyla aynı" msgid "create new preset failed." msgstr "yeni ön ayar oluşturma başarısız oldu." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" -"Mevcut kalibrasyonu iptal edip ana sayfaya dönmek istediğinizden emin misiniz?" +"Mevcut kalibrasyonu iptal edip ana sayfaya dönmek istediğinizden emin " +"misiniz?" msgid "No Printer Connected!" msgstr "Yazıcı Bağlı Değil!" @@ -14564,44 +18104,57 @@ msgid "The input value size must be 3." msgstr "Giriş değeri boyutu 3 olmalıdır." msgid "" -"This machine type can only hold 16 history results per nozzle. You can delete " -"the existing historical results and then start calibration. Or you can " -"continue the calibration, but you cannot create new calibration historical " -"results. \n" +"This machine type can only hold 16 history results per nozzle. You can " +"delete the existing historical results and then start calibration. Or you " +"can continue the calibration, but you cannot create new calibration " +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Bu makine tipi, püskürtme ucu başına yalnızca 16 geçmiş sonucu tutabilir. " -"Mevcut geçmiş sonuçları silebilir ve ardından kalibrasyona başlayabilirsiniz. " -"Veya kalibrasyona devam edebilirsiniz ancak yeni kalibrasyon geçmişi " -"sonuçları oluşturamazsınız.\n" +"Mevcut geçmiş sonuçları silebilir ve ardından kalibrasyona " +"başlayabilirsiniz. Veya kalibrasyona devam edebilirsiniz ancak yeni " +"kalibrasyon geçmişi sonuçları oluşturamazsınız.\n" "Hala kalibrasyona devam etmek istiyor musunuz?" -msgid "Connecting to printer..." -msgstr "Yazıcıya bağlanılıyor..." - -msgid "The failed test result has been dropped." -msgstr "Başarısız olan test sonucu düşürüldü." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Akış Dinamiği Kalibrasyonu sonucu yazıcıya kaydedildi" - #, c-format, boost-format msgid "" -"There is already a historical calibration result with the same name: %s. Only " -"one of the results with the same name is saved. Are you sure you want to " -"override the historical result?" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" + +#, c-format, boost-format +msgid "" +"There is already a historical calibration result with the same name: %s. " +"Only one of the results with the same name is saved. Are you sure you want " +"to override the historical result?" msgstr "" "Aynı ada sahip geçmiş bir kalibrasyon sonucu zaten var: %s. Aynı ada sahip " "sonuçlardan yalnızca biri kaydedilir. Geçmiş sonucu geçersiz kılmak " "istediğinizden emin misiniz?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "" -"Bu makine türü püskürtme ucu başına yalnızca %d geçmiş sonucunu tutabilir. Bu " -"sonuç kaydedilmeyecek." +"Bu makine türü püskürtme ucu başına yalnızca %d geçmiş sonucunu tutabilir. " +"Bu sonuç kaydedilmeyecek." + +msgid "Connecting to printer..." +msgstr "Yazıcıya bağlanılıyor..." + +msgid "The failed test result has been dropped." +msgstr "Başarısız olan test sonucu düşürüldü." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Akış Dinamiği Kalibrasyonu sonucu yazıcıya kaydedildi." msgid "Internal Error" msgstr "İç hata" @@ -14609,33 +18162,36 @@ msgstr "İç hata" msgid "Please select at least one filament for calibration" msgstr "Lütfen kalibrasyon için en az bir filament seçin" -msgid "Flow rate calibration result has been saved to preset" -msgstr "Akış hızı kalibrasyon sonucu ön ayara kaydedildi" +msgid "Flow rate calibration result has been saved to preset." +msgstr "Akış hızı kalibrasyon sonucu ön ayara kaydedildi." -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "Maksimum hacimsel hız kalibrasyon sonucu ön ayara kaydedildi" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "Maksimum hacimsel hız kalibrasyon sonucu ön ayara kaydedildi." msgid "When do you need Flow Dynamics Calibration" msgstr "Akış Dinamiği Kalibrasyonuna ne zaman ihtiyacınız olur" msgid "" "We now have added the auto-calibration for different filaments, which is " -"fully automated and the result will be saved into the printer for future use. " -"You only need to do the calibration in the following limited cases:\n" -"1. If you introduce a new filament of different brands/models or the filament " -"is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"fully automated and the result will be saved into the printer for future " +"use. You only need to do the calibration in the following limited cases:\n" +"1. If you introduce a new filament of different brands/models or the " +"filament is damp;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Artık farklı filamentler için tamamen otomatik olan otomatik kalibrasyonu " -"ekledik ve sonuç ileride kullanılmak üzere yazıcıya kaydedilecek. " +"Artık farklı filamentler için otomatik kalibrasyon ekledik. Bu işlem tamamen " +"otomatik gerçekleşir ve sonuç gelecekte kullanmak üzere yazıcıya kaydedilir. " "Kalibrasyonu yalnızca aşağıdaki sınırlı durumlarda yapmanız gerekir:\n" -"1. Farklı marka/modelde yeni bir filament taktıysanız veya filament " +"1. Farklı marka/modelde yeni bir filament kullanıyorsanız veya filament " "nemliyse;\n" -"2. Nozul aşınmışsa veya yenisiyle değiştirilmişse;\n" -"3. Filament ayarında maksimum hacimsel hız veya baskı sıcaklığı " -"değiştirilirse." +"2. Nozul aşınmışsa veya yeni bir nozul ile değiştirilmişse;\n" +"3. Filament ayarlarında maksimum hacimsel hız (max volumetric speed) veya " +"baskı sıcaklığı değiştirilmişse.”**\n" +"Yani çoğu durumda filament değişimi otomatik olarak kalibre edilir ve " +"kullanıcı müdahalesi gerekmez; sadece yukarıdaki özel durumlarda manuel veya " +"tekrar kalibrasyon yapılması gerekir." msgid "About this calibration" msgstr "Bu kalibrasyon hakkında" @@ -14645,10 +18201,10 @@ msgid "" "\n" "Usually the calibration is unnecessary. When you start a single color/" "material print, with the \"flow dynamics calibration\" option checked in the " -"print start menu, the printer will follow the old way, calibrate the filament " -"before the print; When you start a multi color/material print, the printer " -"will use the default compensation parameter for the filament during every " -"filament switch which will have a good result in most cases.\n" +"print start menu, the printer will follow the old way, calibrate the " +"filament before the print; When you start a multi color/material print, the " +"printer will use the default compensation parameter for the filament during " +"every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results " "unreliable, such as insufficient adhesion on the build plate. Improving " @@ -14664,9 +18220,9 @@ msgstr "" "Genellikle kalibrasyon gereksizdir. Baskı başlatma menüsünde \"akış " "dinamikleri kalibrasyonu\" seçeneği işaretliyken tek renkli/malzemeli bir " "baskı başlattığınızda, yazıcı eski yolu izleyecek, baskıdan önce filamenti " -"kalibre edecektir; Çok renkli/malzemeli bir baskı başlattığınızda, yazıcı her " -"filament değişimi sırasında filament için varsayılan telafi parametresini " -"kullanacaktır ve bu da çoğu durumda iyi bir sonuç verecektir.\n" +"kalibre edecektir; Çok renkli/malzemeli bir baskı başlattığınızda, yazıcı " +"her filament değişimi sırasında filament için varsayılan telafi " +"parametresini kullanacaktır ve bu da çoğu durumda iyi bir sonuç verecektir.\n" "\n" "Yapı plakası üzerinde yetersiz yapışma gibi kalibrasyon sonuçlarını " "güvenilmez hale getirebilecek birkaç durum olduğunu lütfen unutmayın. " @@ -14685,24 +18241,24 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Akış Dinamiği Kalibrasyonunu kullandıktan sonra hâlâ aşağıdaki gibi bazı " "ekstrüzyon sorunları olabilir:\n" "1. Aşırı Ekstrüzyon: Basılı nesnenizdeki fazla malzeme, kabarcıklar veya " "sivilceler oluşturuyor veya katmanlar beklenenden daha kalın görünüyor ve " -"tekdüze değil.\n" +"tekdüze değil\n" "2. Eksik Ekstrüzyon: Yavaş yazdırırken bile çok ince katmanlar, zayıf dolgu " -"mukavemeti veya modelin üst katmanındaki boşluklar.\n" +"mukavemeti veya modelin üst katmanındaki boşluklar\n" "3. Kötü Yüzey Kalitesi: Baskılarınızın yüzeyi pürüzlü veya düzensiz " -"görünüyor.\n" +"görünüyor\n" "4. Zayıf Yapısal Bütünlük: Baskılar kolayca kırılıyor veya olması gerektiği " -"kadar sağlam görünmüyor." +"kadar sağlam görünmüyor" msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" @@ -14716,10 +18272,10 @@ msgstr "" msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " "volumes. The default setting works well in Bambu Lab printers and official " -"filaments as they were pre-calibrated and fine-tuned. For a regular filament, " -"you usually won't need to perform a Flow Rate Calibration unless you still " -"see the listed defects after you have done other calibrations. For more " -"details, please check out the wiki article." +"filaments as they were pre-calibrated and fine-tuned. For a regular " +"filament, you usually won't need to perform a Flow Rate Calibration unless " +"you still see the listed defects after you have done other calibrations. For " +"more details, please check out the wiki article." msgstr "" "Akış Hızı Kalibrasyonu, beklenen ekstrüzyon hacimlerinin gerçek ekstrüzyon " "hacimlerine oranını ölçer. Varsayılan ayar, önceden kalibre edilmiş ve ince " @@ -14734,12 +18290,13 @@ msgid "" "directly measuring the calibration patterns. However, please be advised that " "the efficacy and accuracy of this method may be compromised with specific " "types of materials. Particularly, filaments that are transparent or semi-" -"transparent, sparkling-particled, or have a high-reflective finish may not be " -"suitable for this calibration and can produce less-than-desirable results.\n" +"transparent, sparkling-particled, or have a high-reflective finish may not " +"be suitable for this calibration and can produce less-than-desirable " +"results.\n" "\n" -"The calibration results may vary between each calibration or filament. We are " -"still improving the accuracy and compatibility of this calibration through " -"firmware updates over time.\n" +"The calibration results may vary between each calibration or filament. We " +"are still improving the accuracy and compatibility of this calibration " +"through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only " "by those who fully understand its purpose and implications. Incorrect usage " @@ -14750,8 +18307,8 @@ msgstr "" "kullanarak kalibrasyon modellerini doğrudan ölçer. Ancak, bu yöntemin " "etkinliğinin ve doğruluğunun belirli malzeme türleriyle tehlikeye " "girebileceğini lütfen unutmayın. Özellikle şeffaf veya yarı şeffaf, parlak " -"parçacıklı veya yüksek yansıtıcı yüzeye sahip filamentler bu kalibrasyon için " -"uygun olmayabilir ve arzu edilenden daha az sonuçlar üretebilir.\n" +"parçacıklı veya yüksek yansıtıcı yüzeye sahip filamentler bu kalibrasyon " +"için uygun olmayabilir ve arzu edilenden daha az sonuçlar üretebilir.\n" "\n" "Kalibrasyon sonuçları her kalibrasyon veya filament arasında farklılık " "gösterebilir. Zaman içinde ürün yazılımı güncellemeleriyle bu kalibrasyonun " @@ -14760,8 +18317,8 @@ msgstr "" "Dikkat: Akış Hızı Kalibrasyonu, yalnızca amacını ve sonuçlarını tam olarak " "anlayan kişiler tarafından denenmesi gereken gelişmiş bir işlemdir. Yanlış " "kullanım, ortalamanın altında baskılara veya yazıcının zarar görmesine neden " -"olabilir. Lütfen işlemi yapmadan önce işlemi dikkatlice okuyup anladığınızdan " -"emin olun." +"olabilir. Lütfen işlemi yapmadan önce işlemi dikkatlice okuyup " +"anladığınızdan emin olun." msgid "When you need Max Volumetric Speed Calibration" msgstr "Maksimum Hacimsel Hız Kalibrasyonuna ihtiyaç duyduğunuzda" @@ -14783,33 +18340,23 @@ msgid "We found the best Flow Dynamics Calibration Factor" msgstr "En iyi Akış Dinamiği Kalibrasyon Faktörünü bulduk" msgid "" -"Part of the calibration failed! You may clean the plate and retry. The failed " -"test result would be dropped." +"Part of the calibration failed! You may clean the plate and retry. The " +"failed test result would be dropped." msgstr "" "Kalibrasyonun bir kısmı başarısız oldu! Plakayı temizleyip tekrar " "deneyebilirsiniz. Başarısız olan test sonucu görmezden gelinir." msgid "" -"*We recommend you to add brand, materia, type, and even humidity level in the " -"Name" +"*We recommend you to add brand, materia, type, and even humidity level in " +"the Name" msgstr "*İsme marka, malzeme, tür ve hatta nem seviyesini eklemenizi öneririz" -msgid "Failed" -msgstr "Başarısız" - msgid "Please enter the name you want to save to printer." msgstr "Lütfen yazıcıya kaydetmek istediğiniz adı girin." msgid "The name cannot exceed 40 characters." msgstr "Ad 40 karakteri aşamaz." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Aynı ada sahip sonuçlardan yalnızca biri kaydedilecektir. Diğer sonuçları " -"geçersiz kılmak istediğinizden emin misiniz?" - msgid "Please find the best line on your plate" msgstr "Lütfen plakadaki en iyi çizgiyi bulun" @@ -14822,9 +18369,6 @@ msgstr "Girdi değeri" msgid "Save to Filament Preset" msgstr "Filament Ön Ayarına Kaydet" -msgid "Preset" -msgstr "Ön ayar" - msgid "Record Factor" msgstr "Kayıt Faktörü" @@ -14859,9 +18403,6 @@ msgstr "Kalibrasyon2'yi atla" msgid "flow ratio : %s " msgstr "akış oranı : %s " -msgid "Please choose a block with smoothest top surface" -msgstr "Lütfen üst yüzeyi en pürüzsüz olan bloğu seçin" - msgid "Please choose a block with smoothest top surface." msgstr "Lütfen üst yüzeyi en pürüzsüz olan bloğu seçin." @@ -14890,22 +18431,37 @@ msgstr "" msgid "Printing Parameters" msgstr "Yazdırma Parametreleri" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "Plaka Tipi" msgid "filament position" msgstr "filament konumu" -msgid "External Spool" -msgstr "Harici Makara" - msgid "Filament For Calibration" msgstr "Kalibrasyon İçin Filament" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Kalibrasyon malzemesi için ipuçları:\n" "- Aynı baskı yatağı sıcaklığını paylaşabilen malzemeler\n" @@ -14924,9 +18480,26 @@ msgstr "%s, %s ile uyumlu değil" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "Flow Dynamics Otomatik Kalibrasyonunda TPU desteklenmiyor." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Sıcaklık farkı çok büyük olan birden fazla filament aynı anda basılamaz. " +"Aksi takdirde ekstruder ve nozul baskı sırasında tıkanabilir veya zarar " +"görebilir" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Yazıcıya bağlanılıyor" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "K değerinden" @@ -14945,6 +18518,9 @@ msgstr "Hacimsel Hızdan" msgid "To Volumetric Speed" msgstr "Hacimsel Hıza" +msgid "Are you sure you want to cancel this print?" +msgstr "Bu yazdırmayı iptal etmek istediğinizden emin misiniz?" + msgid "Flow Dynamics Calibration Result" msgstr "Akış Dinamiği Kalibrasyon Sonucu" @@ -14971,6 +18547,13 @@ msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "Akış Dinamiği Kalibrasyonunu Düzenle" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "Yeni Akış Dinamik Kalibrasyonu" @@ -14980,6 +18563,12 @@ msgstr "Tamam" msgid "The filament must be selected." msgstr "Filament seçilmelidir." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Ağ araması" @@ -15015,15 +18604,12 @@ msgstr "" msgid "PA Calibration" msgstr "PA Kalibrasyonu" -msgid "DDE" -msgstr "DDE" - -msgid "Bowden" -msgstr "Bowden" - msgid "Extruder type" msgstr "Ekstruder tipi" +msgid "DDE" +msgstr "DDE" + msgid "PA Tower" msgstr "PA Kulesi" @@ -15042,14 +18628,32 @@ msgstr "PA bitişi: " msgid "PA step: " msgstr "PA adımı: " +msgid "Accelerations: " +msgstr "İvmeler: " + +msgid "Speeds: " +msgstr "Speeds: " + msgid "Print numbers" msgstr "Sayıları yazdır" +msgid "Comma-separated list of printing accelerations" +msgstr "Yazdırma ivmelerinin virgülle ayrılmış listesi" + +msgid "Comma-separated list of printing speeds" +msgstr "Yazdırma hızlarının virgülle ayrılmış listesi" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Lütfen geçerli değerleri girin:\n" "PA'yı başlat: >= 0,0\n" @@ -15059,6 +18663,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Sıcaklık kalibrasyonu" +msgid "Filament type" +msgstr "Filament türü" + msgid "PLA" msgstr "PLA" @@ -15080,9 +18687,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Filament türü" - msgid "Start temp: " msgstr "Başlangıç sıcaklığı: " @@ -15092,16 +18696,15 @@ msgstr "Bitiş: " msgid "Temp step: " msgstr "Sıcaklık adımı: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Lütfen geçerli değerleri girin:\n" -"Başlangıç sıcaklığı: <= 350\n" -"Bitiş sıcaklığı: >= 170\n" -"Başlangıç sıcaklığı > Bitiş sıcaklığı + 5)" msgid "Max volumetric speed test" msgstr "Maksimum hacimsel hız testi" @@ -15112,14 +18715,14 @@ msgstr "Hacimsel hız başlangıcı: " msgid "End volumetric speed: " msgstr "Hacimsel hız bitişi: " -msgid "step: " -msgstr "adım: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Lütfen geçerli değerleri girin:\n" "başlangıç > 0 \n" @@ -15135,11 +18738,14 @@ msgstr "Başlangıç hızı: " msgid "End speed: " msgstr "Bitiş hızı: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Lütfen geçerli değerleri girin:\n" "başlangıç > 10 \n" @@ -15152,10 +18758,138 @@ msgstr "Geri çekme uzunluğu başlangıcı: " msgid "End retraction length: " msgstr "Geri çekme uzunluğu bitişi: " -msgid "mm/mm" -msgstr "mm/mm" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "Input shaping frekans testi" + +msgid "Test model" +msgstr "Test model" + +msgid "Ringing Tower" +msgstr "Titreşim Test Kulesi" + +msgid "Fast Tower" +msgstr "Hız Kulesi" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "Başlangıç / Bitiş" + +msgid "Frequency settings" +msgstr "Frekans ayarları" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "Damp: " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Lütfen geçerli değerler girin:\n" +"(0 < FreqStart < FreqEnd < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" +"Lütfen geçerli bir sönüm (damping) katsayısı girin (0 < Sönüm/Zeta katsayısı " +"≤ 1)" + +msgid "Input shaping Damp test" +msgstr "Input shaping damp testi" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "Frekans" + +msgid "Damp" +msgstr "Damp" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "Not: Daha önce hesaplanan frekansları kullanın." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Lütfen geçerli değerler girin:\n" +"(0 < Frekans < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Lütfen geçerli bir kamp faktörü girin (0 <= DampingStart < DampingEnd <= 1)" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "G Kodunu yazıcı ana bilgisayarına gönder" msgid "Upload to Printer Host with the following filename:" @@ -15202,23 +18936,42 @@ msgstr "Seçileni iptal et" msgid "Show error message" msgstr "Hata mesajını göster" -msgid "Enqueued" +msgid "Queued" msgstr "Sıraya alındı" msgid "Uploading" msgstr "Yükleniyor" -msgid "Cancelling" +msgid "Canceling" msgstr "İptal Ediliyor" msgid "Error uploading to print host" msgstr "Yazdırma ana bilgisayarına yükleme hatası" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Seçilen plaka tipi dosyayla eşleşmiyor. Lütfen yazdırmaya başlamadan önce " +"onaylayın." + +msgid "Time-lapse" +msgstr "Hızlandırılmış" + +msgid "Heated Bed Leveling" +msgstr "Isıtmalı Yatak Seviyeleme" + +msgid "Textured Build Plate (Side A)" +msgstr "Textured Build Plate (A Tarafı)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Smooth Build Plate (B Tarafı)" + msgid "Unable to perform boolean operation on selected parts" msgstr "Seçilen parçalarda bölme işlemi gerçekleştirilemiyor" msgid "Mesh Boolean" -msgstr "Mesh Boolean" +msgstr "Mesh Bölme" msgid "Union" msgstr "Union" @@ -15242,7 +18995,7 @@ msgid "Subtract with" msgstr "Şununla çıkar" msgid "selected" -msgstr "seçili" +msgstr "Seçili" msgid "Part 1" msgstr "Bölüm 1" @@ -15254,7 +19007,7 @@ msgid "Delete input" msgstr "Girişi sil" msgid "Network Test" -msgstr "Ağ testi" +msgstr "Ağ Testi" msgid "Start Test Multi-Thread" msgstr "Çoklu İş Parçacığı Testini Başlat" @@ -15274,13 +19027,13 @@ msgstr "Sistem Versiyonu:" msgid "DNS Server:" msgstr "Dns sunucusu:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Snapmaker Orca'ı (GitHub) test edin" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Snapmaker Orca'ı (GitHub) test edin:" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "Bing.com'u test edin" msgid "Test bing.com:" @@ -15344,14 +19097,14 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "Özel satıcı girişi yapılmaz, lütfen özel satıcıyı girin." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "\"Bambu\" veya \"Genel\" özel filamentler için Satıcı olarak kullanılamaz." msgid "Filament type is not selected, please reselect type." msgstr "Filament türü seçilmedi, lütfen türünü seçin." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "Filamentin serisi girilmedi, lütfen seri numarasını girin." msgid "" @@ -15366,7 +19119,7 @@ msgstr "" "Özel satıcı veya seri numarasındaki tüm girişler boşluklardan oluşuyor. " "Lütfen tekrar girin." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "Üretici bir sayı olamaz. Lütfen tekrar girin." msgid "" @@ -15375,13 +19128,13 @@ msgstr "Henüz bir yazıcı veya ön ayar seçmediniz. Lütfen en az birini seç #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" "Oluşturduğunuz %s Filament adı zaten mevcut.\n" -"Oluşturmaya devam ederseniz oluşturulan ön ayar tam adıyla görüntülenecektir. " -"Devam etmek istiyor musun?" +"Oluşturmaya devam ederseniz oluşturulan ön ayar tam adıyla " +"görüntülenecektir. Devam etmek istiyor musun?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "Aşağıdaki gibi bazı mevcut ön ayarlar oluşturulamadı:\n" @@ -15395,11 +19148,11 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Ön ayarları şu şekilde yeniden adlandırırdık: \"Satıcı Türü Seçtiğiniz Seri " -"@printer\". \n" +"@printer\".\n" "Daha fazla yazıcıya yönelik ön ayar eklemek için lütfen yazıcı seçimine gidin" msgid "Create Printer/Nozzle" @@ -15423,21 +19176,27 @@ msgstr "Ön Ayarı İçe Aktar" msgid "Create Type" msgstr "Tür Oluştur" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "Model bulunamadı, lütfen satıcıyı seçin." -msgid "Select Model" -msgstr "Model Seçin" - msgid "Select Printer" msgstr "Yazıcıyı Seçin" +msgid "Select Model" +msgstr "Model Seçin" + msgid "Input Custom Model" msgstr "Özel Model Girin" msgid "Can't find my printer model" msgstr "Yazıcı modelimi bulamıyorum" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Dikdörtgen" @@ -15447,15 +19206,9 @@ msgstr "Yazdırılabilir Alan" msgid "Hot Bed STL" msgstr "Sıcak Yatak STL" -msgid "Load stl" -msgstr "Stl'i yükle" - msgid "Hot Bed SVG" msgstr "Sıcak Yatak SVG" -msgid "Load svg" -msgstr "Svg'yi yükle" - msgid "Max Print Height" msgstr "Maksimum Baskı Yüksekliği" @@ -15466,16 +19219,16 @@ msgstr "Dosya %d MB'yi aşıyor lütfen tekrar içe aktarın." msgid "Exception in obtaining file size, please import again." msgstr "Dosya boyutunun elde edilmesinde istisna, lütfen tekrar içe aktarın." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Ön ayar yolu bulunamıyor, lütfen satıcıyı yeniden seçin." msgid "The printer model was not found, please reselect." msgstr "Yazıcı modeli bulunamadı, lütfen yeniden seçin." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Nozul çapı bulunamadı, lütfen yeniden seçin." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "Yazıcı ön ayarı bulunamadı, lütfen yeniden seçin." msgid "Printer Preset" @@ -15490,25 +19243,19 @@ msgstr "Hiçbirini seçme" msgid "Process Preset Template" msgstr "İşleme Ön Ayarı Şablonu" -msgid "Back Page 1" -msgstr "Arka Sayfa 1" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" msgstr "" -"Hangi yazıcı ön ayarının temel alınacağını henüz seçmediniz. Lütfen yazıcının " -"satıcısını ve modelini seçin" +"Hangi yazıcı ön ayarının temel alınacağını henüz seçmediniz. Lütfen " +"yazıcının satıcısını ve modelini seçin" msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." msgstr "" -"İlk sayfadaki yazdırılabilir alan kısmına geçersiz bir giriş yaptınız. Lütfen " -"oluşturmadan önce kontrol edin." - -msgid "The custom printer or model is not inputed, place input." -msgstr "Özel yazıcı veya model girilmedi lütfen giriş yapın." +"İlk sayfadaki yazdırılabilir alan kısmına geçersiz bir giriş yaptınız. " +"Lütfen oluşturmadan önce kontrol edin." msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -15522,7 +19269,8 @@ msgstr "" "Oluşturduğunuz yazıcı ön ayarının zaten aynı ada sahip bir ön ayarı var. " "Üzerine yazmak istiyor musunuz?\n" "\tEvet: Aynı adı taşıyan yazıcı ön ayarının üzerine yazın; aynı ön ayar adı " -"taşıyan filaman ve proses ön ayarları yeniden oluşturulacak ve aynı ön ayar \n" +"taşıyan filaman ve proses ön ayarları yeniden oluşturulacak ve aynı ön " +"ayar \n" "adı olmayan filament ve işlem ön ayarları rezerve edilecektir.\n" "\tİptal: Ön ayar oluşturmayın, oluşturma arayüzüne dönün." @@ -15538,14 +19286,14 @@ msgstr "Filament ön ayarları oluşturulamadı. Şu şekilde:\n" msgid "Create process presets failed. As follows:\n" msgstr "İşlem ön ayarları oluşturulamadı. Şu şekilde:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Satıcı bulunamadı, lütfen yeniden seçin." msgid "Current vendor has no models, please reselect." msgstr "Mevcut satıcının modeli yok, lütfen yeniden seçin." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "Satıcıyı ve modeli seçmediniz veya özel satıcıyı ve modeli girmediniz." @@ -15564,16 +19312,25 @@ msgstr "" msgid "Please check bed printable shape and origin input." msgstr "" -"Lütfen baskı yapılabilir şekil ve başlangıç ​​noktası girişini kontrol edin." +"Lütfen baskı yapılabilir şekil ve başlangıç noktası girişini kontrol edin." msgid "" "You have not yet selected the printer to replace the nozzle, please choose." -msgstr "Hala nozulu değiştirmek için yazıcı seçmediniz, lütfen bir seçim yapın." +msgstr "" +"Hala nozulu değiştirmek için yazıcı seçmediniz, lütfen bir seçim yapın." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Yazıcı Oluşturma Başarılı" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Filament Oluşturma Başarılı" msgid "Printer Created" @@ -15602,7 +19359,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" @@ -15651,8 +19408,8 @@ msgstr "Dışa aktarma başarılı" #, c-format, boost-format msgid "" -"The '%s' folder already exists in the current directory. Do you want to clear " -"it and rebuild it.\n" +"The '%s' folder already exists in the current directory. Do you want to " +"clear it and rebuild it.\n" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" @@ -15661,18 +19418,27 @@ msgstr "" "Değilse, bir zaman son eki eklenecektir ve oluşturulduktan sonra adı " "değiştirebilirsiniz." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" +"%s dosyası başka bir program tarafından açılmış olabilir.\n" +"Lütfen kapatıp tekrar deneyin." + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"Yazıcı ve yazıcıya ait tüm filament ve işlem ön ayarları. \n" +"Yazıcı ve yazıcıya ait tüm filament ve işlem ön ayarları.\n" "Başkalarıyla paylaşılabilir." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" -"Kullanıcının filament ön ayarı. \n" +"Kullanıcının filament ön ayarı.\n" "Başkalarıyla paylaşılabilir." msgid "" @@ -15691,8 +19457,8 @@ msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" -"Yalnızca kullanıcı yazıcı ön ayarlarına sahip yazıcı adları görüntülenecek ve " -"seçtiğiniz her ön ayar zip olarak dışa aktarılacaktır." +"Yalnızca kullanıcı yazıcı ön ayarlarına sahip yazıcı adları görüntülenecek " +"ve seçtiğiniz her ön ayar zip olarak dışa aktarılacaktır." msgid "" "Only the filament names with user filament presets will be displayed, \n" @@ -15700,13 +19466,13 @@ msgid "" "exported as a zip." msgstr "" "Yalnızca kullanıcı filamenti ön ayarlarına sahip filament adları \n" -"görüntülenecek ve seçtiğiniz her filament adındaki tüm kullanıcı filamenti ön " -"ayarları zip olarak dışa aktarılacaktır." +"görüntülenecek ve seçtiğiniz her filament adındaki tüm kullanıcı filamenti " +"ön ayarları zip olarak dışa aktarılacaktır." msgid "" "Only printer names with changed process presets will be displayed, \n" -"and all user process presets in each printer name you select will be exported " -"as a zip." +"and all user process presets in each printer name you select will be " +"exported as a zip." msgstr "" "Yalnızca işlem ön ayarları değiştirilen yazıcı adları görüntülenecek \n" "ve seçtiğiniz her yazıcı adındaki tüm kullanıcı işlem ön ayarları zip olarak " @@ -15730,13 +19496,13 @@ msgid "Filament presets under this filament" msgstr "Bu filamentin altındaki filament ön ayarları" msgid "" -"Note: If the only preset under this filament is deleted, the filament will be " -"deleted after exiting the dialog." +"Note: If the only preset under this filament is deleted, the filament will " +"be deleted after exiting the dialog." msgstr "" "Not: Bu filamentin altındaki tek ön ayar silinirse, diyalogdan çıkıldıktan " "sonra filament silinecektir." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "Diğer ön ayarlar tarafından devralınan ön ayarlar silinemez" msgid "The following presets inherits this preset." @@ -15747,6 +19513,15 @@ msgstr[1] "Aşağıdaki ön ayar bu ön ayarı devralır." msgid "Delete Preset" msgstr "Ön Ayarı Sil" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Seçilen ön ayarı silmek istediğinizden emin misiniz?\n" +"Eğer ön ayar, şu anda yazıcınızda kullanılan bir filamente karşılık " +"geliyorsa, lütfen o slot için filament bilgilerini sıfırlayın." + msgid "Are you sure to delete the selected preset?" msgstr "Seçilen ön ayarı sildiğinizden emin misiniz?" @@ -15756,15 +19531,12 @@ msgstr "Ön ayarı sil" msgid "+ Add Preset" msgstr "+ Ön Ayar Ekle" -msgid "Delete Filament" -msgstr "Filamenti Sil" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" -"Bu filamente ait tüm filaman ön ayarları silinecektir. \n" +"Bu filamente ait tüm filaman ön ayarları silinecektir.\n" "Yazıcınızda bu filamenti kullanıyorsanız lütfen o yuvanın filament bilgisini " "sıfırlayın." @@ -15799,19 +19571,34 @@ msgid "Daily Tips" msgstr "Günlük İpuçları" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "hafızaya alınan nozul: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Ön ayardaki nozul çapınız hafızaya alınan nozul çapıyla tutarlı değil. Son " -"zamanlarda nozulunuzu değiştirdiniz mi?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "%s malzemesini %s ile yazdırmak püskürtme ucu hasarına neden olabilir" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "Yazıcı seçmeniz gerekiyor" @@ -15819,6 +19606,35 @@ msgstr "Yazıcı seçmeniz gerekiyor" msgid "The start, end or step is not valid value." msgstr "Başlangıç, bitiş veya adım geçerli bir değer değildir." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15841,15 +19657,13 @@ msgstr "Başarılı!" msgid "Are you sure to log out?" msgstr "Çıkış yaptığınızdan emin misiniz?" -msgid "Refresh Printers" -msgstr "Yazıcıları Yenile" - msgid "View print host webui in Device tab" msgstr "Aygıt sekmesinde yazdırma ana bilgisayarı web arayüzünü görüntüleyin" msgid "Replace the BambuLab's device tab with print host webui" msgstr "" -"BambuLab’ın aygıt sekmesini yazdırma ana bilgisayarı web arayüzüyle değiştirin" +"BambuLab’ın aygıt sekmesini yazdırma ana bilgisayarı web arayüzüyle " +"değiştirin" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" @@ -15869,8 +19683,8 @@ msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"Bu sistemde %s, sistem Sertifika Deposu veya Anahtar Zincirinden alınan HTTPS " -"sertifikalarını kullanıyor." +"Bu sistemde %s, sistem Sertifika Deposu veya Anahtar Zincirinden alınan " +"HTTPS sertifikalarını kullanıyor." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " @@ -15891,22 +19705,22 @@ msgstr "" msgid "Mismatched type of print host: %s" msgstr "Eşleşmeyen yazdırma ana bilgisayarı türü: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "AstroBox'a bağlantı düzgün çalışıyor." msgid "Could not connect to AstroBox" msgstr "AstroBox'a bağlanılamadı" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Not: AstroBox sürümünün en az 1.1.0 olması gerekmektedir." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "Duet'e bağlantı düzgün çalışıyor." msgid "Could not connect to Duet" msgstr "Duet'e bağlanılamadı" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Bilinmeyen hata oluştu" msgid "Wrong password" @@ -15918,7 +19732,7 @@ msgstr "Yeni bir bağlantı oluşturmak için kaynaklar alınamadı" msgid "Upload not enabled on FlashAir card." msgstr "FlashAir kartında yükleme etkin değil." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "FlashAir bağlantısı düzgün çalışıyor ve yükleme etkin." msgid "Could not connect to FlashAir" @@ -15931,28 +19745,28 @@ msgstr "" "Not: Firmware 2.00.02 veya daha yeni ve etkinleştirilmiş yükleme işlevine " "sahip FlashAir gereklidir." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "MKS'ye bağlantı düzgün çalışıyor." msgid "Could not connect to MKS" msgstr "MKS'ye bağlanılamadı" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "OctoPrint'e bağlantı düzgün çalışıyor." msgid "Could not connect to OctoPrint" msgstr "OctoPrint'e bağlanılamadı" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Not: OctoPrint sürümü en az 1.1.0 gereklidir." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Prusa SL1 / SL1S bağlantısı düzgün çalışıyor." msgid "Could not connect to Prusa SLA" msgstr "Prusa SLA'ya bağlanılamadı" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "PrusaLink'e bağlantı düzgün çalışıyor." msgid "Could not connect to PrusaLink" @@ -15976,19 +19790,19 @@ msgstr "%1% : boş alan yok" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "Yükleme başarısız oldu. %1%'de uygun depolama alanı bulunamadı." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Prusa Connect'e bağlantı düzgün çalışıyor." msgid "Could not connect to Prusa Connect" msgstr "Prusa Connect'e bağlanılamadı" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Repetier'e bağlantı düzgün çalışıyor." msgid "Could not connect to Repetier" msgstr "Repetier'a bağlanılamadı" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Not: Repetier sürümü en az 0.90.0 gereklidir." #, boost-format @@ -16020,35 +19834,35 @@ msgstr "" "Hata: \"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines and " -"high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Küçük bir katman yüksekliğine sahiptir ve neredeyse ihmal edilebilir katman " "çizgileri ve yüksek baskı kalitesi sağlar. Çoğu genel yazdırma durumu için " "uygundur." msgid "" -"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and " -"acceleration, and the sparse infill pattern is Gyroid. So, it results in much " -"higher printing quality, but a much longer printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "0,2 mm’lik nozülün varsayılan profiliyle karşılaştırıldığında daha düşük hız " -"ve ivmeye sahiptir ve seyrek dolgu deseni Gyroid’dir. Böylece çok daha yüksek " -"baskı kalitesi elde edilir, ancak çok daha uzun baskı süresi elde edilir." +"ve ivmeye sahiptir ve seyrek dolgu deseni Gyroid’dir. Böylece çok daha " +"yüksek baskı kalitesi elde edilir, ancak çok daha uzun baskı süresi elde " +"edilir." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" -"0,2 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, biraz " -"daha büyük katman yüksekliğine sahiptir ve neredeyse ihmal edilebilir düzeyde " -"katman çizgileri ve biraz daha kısa yazdırma süresi sağlar." +"0,2 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +"biraz daha büyük katman yüksekliğine sahiptir ve neredeyse ihmal edilebilir " +"düzeyde katman çizgileri ve biraz daha kısa yazdırma süresi sağlar." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "0,2 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "büyük bir katman yüksekliğine sahiptir ve katman çizgilerinin hafifçe " @@ -16056,18 +19870,18 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"0,2 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " -"katman yüksekliği daha küçüktür ve neredeyse görünmez katman çizgileri ve " -"daha yüksek baskı kalitesi, ancak daha kısa yazdırma süresi sağlar." +"0,2 mm nozulun varsayılan profiliyle karşılaştırıldığında, daha küçük bir " +"katman yüksekliğine sahiptir. Bu, neredeyse görünmez katman çizgileri ve " +"daha yüksek baskı kalitesiyle birlikte daha uzun baskı süresi sağlar." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "0,2 mm’lik nozulun varsayılan profiliyle karşılaştırıldığında, daha küçük " "katman çizgilerine, daha düşük hızlara ve ivmeye sahiptir ve seyrek dolgu " @@ -16076,19 +19890,19 @@ msgstr "" "edilir." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"Varsayılan 0,2 mm püskürtme ucu profiliyle karşılaştırıldığında, daha küçük " -"katman yüksekliğine sahiptir ve minimum katman çizgileri ve daha yüksek baskı " -"kalitesi sağlar, ancak daha kısa yazdırma süresi sağlar." +"0,2 mm'lik nozulun varsayılan profiliyle karşılaştırıldığında, daha küçük " +"bir katman yüksekliğine sahiptir. Bu sayede minimum katman çizgisi ve daha " +"yüksek baskı kalitesi elde edilirken, baskı süresi daha uzundur." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "0,2 mm’lik nozulun varsayılan profiliyle karşılaştırıldığında, daha küçük " "katman çizgilerine, daha düşük hızlara ve ivmeye sahiptir ve seyrek dolgu " @@ -16096,16 +19910,16 @@ msgstr "" "kalitesi elde edilir, ancak çok daha uzun baskı süresi elde edilir." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Genel bir katman yüksekliğine sahiptir ve genel katman çizgileri ve baskı " "kalitesiyle sonuçlanır. Çoğu genel yazdırma durumu için uygundur." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "0,4 mm’lik nozulun varsayılan profiliyle karşılaştırıldığında, daha fazla " "duvar döngüsüne ve daha yüksek seyrek dolgu yoğunluğuna sahiptir. Bu, " @@ -16114,8 +19928,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "0,4 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "büyük bir katman yüksekliğine sahiptir ve daha belirgin katman çizgileri ve " @@ -16124,8 +19938,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "0,4 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "büyük bir katman yüksekliğine sahiptir ve daha belirgin katman çizgileri ve " @@ -16133,18 +19947,18 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing quality, " -"but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "0,4 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " -"küçük bir katman yüksekliğine sahiptir ve daha az görünür katman çizgileri ve " -"daha yüksek baskı kalitesi sağlar, ancak daha uzun yazdırma süresi sağlar." +"küçük bir katman yüksekliğine sahiptir ve daha az görünür katman çizgileri " +"ve daha yüksek baskı kalitesi sağlar, ancak daha uzun yazdırma süresi sağlar." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "0,4 mm’lik nozülün varsayılan profiliyle karşılaştırıldığında daha küçük " "katman yüksekliğine, daha düşük hızlara ve ivmeye sahiptir ve seyrek dolgu " @@ -16154,8 +19968,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "0,4 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " "katman yüksekliği daha küçüktür ve neredeyse göz ardı edilebilir katman " @@ -16165,8 +19979,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "0,4 mm’lik nozülün varsayılan profiliyle karşılaştırıldığında daha küçük " "katman yüksekliğine, daha düşük hızlara ve ivmeye sahiptir ve seyrek dolgu " @@ -16176,23 +19990,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "0,4 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " "katman yüksekliği daha küçüktür ve neredeyse göz ardı edilebilecek düzeyde " "katman çizgileri ve daha uzun yazdırma süresi sağlar." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Büyük bir katman yüksekliğine sahiptir ve belirgin katman çizgileri ile " "sıradan baskı kalitesi ve baskı süresi sağlar." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "0,6 mm’lik nozulun varsayılan profiliyle karşılaştırıldığında, daha fazla " "duvar döngüsüne ve daha yüksek seyrek dolgu yoğunluğuna sahiptir. Bu, " @@ -16201,8 +20015,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "0,6 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "büyük bir katman yüksekliğine sahiptir ve daha belirgin katman çizgileri ve " @@ -16211,8 +20025,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "0,6 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "büyük bir katman yüksekliğine sahiptir ve çok daha belirgin katman çizgileri " @@ -16221,8 +20035,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "0,6 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " "küçük bir katman yüksekliğine sahiptir ve katman çizgilerinin daha az " @@ -16231,60 +20045,370 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing quality, " -"but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "0,6 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " -"küçük bir katman yüksekliğine sahiptir ve daha az görünür katman çizgileri ve " -"daha yüksek baskı kalitesi sağlar, ancak daha uzun yazdırma süresi sağlar." +"küçük bir katman yüksekliğine sahiptir ve daha az görünür katman çizgileri " +"ve daha yüksek baskı kalitesi sağlar, ancak daha uzun yazdırma süresi sağlar." msgid "" -"It has a very big layer height, and results in very apparent layer lines, low " -"printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Çok büyük bir katman yüksekliğine sahiptir ve çok belirgin katman " -"çizgilerine, düşük baskı kalitesine ve genel yazdırma süresine neden olur." +"Çok büyük bir katman yüksekliğine sahiptir. Bu da çok belirgin katman " +"çizgilerine, düşük baskı kalitesine ve daha kısa baskı süresine neden olur." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " -"büyük bir katman yüksekliğine sahiptir ve çok belirgin katman çizgileri ve " -"çok daha düşük baskı kalitesiyle sonuçlanır, ancak bazı yazdırma durumlarında " -"daha kısa yazdırma süresi sağlar." +"0,8 mm'lik nozulun varsayılan profiliyle karşılaştırıldığında, daha büyük " +"bir katman yüksekliğine sahiptir. Bu, çok belirgin katman çizgilerine ve çok " +"daha düşük baskı kalitesine, ancak bazı durumlarda daha kısa baskı süresine " +"neden olur." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, çok " -"daha büyük bir katman yüksekliğine sahiptir ve son derece belirgin katman " -"çizgileri ve çok daha düşük baskı kalitesiyle sonuçlanır, ancak bazı yazdırma " -"durumlarında çok daha kısa yazdırma süresi sağlar." +"0,8 mm'lik nozulun varsayılan profiliyle karşılaştırıldığında, çok daha " +"büyük bir katman yüksekliğine sahiptir. Bu, son derece belirgin katman " +"çizgilerine ve çok daha düşük baskı kalitesine, ancak bazı durumlarda çok " +"daha kısa baskı süresine neden olur." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" -"0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, biraz " -"daha küçük bir katman yüksekliğine sahiptir ve biraz daha az ama yine de " -"görünür katman çizgileri ve biraz daha yüksek baskı kalitesi sağlar, ancak " -"bazı yazdırma durumlarında daha uzun yazdırma süresi sağlar." +"0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +"biraz daha küçük bir katman yüksekliğine sahiptir ve biraz daha az ama yine " +"de görünür katman çizgileri ve biraz daha yüksek baskı kalitesi sağlar, " +"ancak bazı yazdırma durumlarında daha uzun yazdırma süresi sağlar." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" +"0,8 mm'lik nozulun varsayılan profiliyle karşılaştırıldığında, daha küçük " +"bir katman yüksekliğine sahiptir. Bu, daha az ancak yine de belirgin katman " +"çizgileri ve biraz daha yüksek baskı kalitesiyle sonuçlanır, ancak bazı " +"durumlarda daha uzun baskı süresi sağlar." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "AMS Yok" + +msgid "There is no device available to send printing." +msgstr "Baskı göndermek için kullanılabilir bir cihaz yok." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "Aynı anda kullanımda olan yazıcı sayısı 0'a eşit olamaz." + +msgid "Use External Spool" +msgstr "Harici Makara Kullanın" + +msgid "Select Printers" +msgstr "Yazıcıları Seçin" + +msgid "Device Name" +msgstr "Cihaz Adı" + +msgid "Device Status" +msgstr "Cihaz Durumu" + +msgid "AMS Status" +msgstr "AMS Durumu" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "Lütfen buradan yönetmek istediğiniz cihazları seçin (en fazla 6 cihaz)" + +msgid "Printing Options" +msgstr "Yazdırma Seçenekleri" + +msgid "Bed Leveling" +msgstr "Yatak Tesviyesi" + +msgid "Flow Dynamic Calibration" +msgstr "Akış Dinamik Kalibrasyonu" + +msgid "Send Options" +msgstr "Gönderme Seçenekleri" + +msgid "Send to" +msgstr "Gönderildi" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"aynı anda kaç yazıcının ısıtma işleminden geçebileceği, aynı anda " +"ısıtılabilecek cihaz sayısına bağlıdır." + +msgid "Wait" +msgstr "Bekleyin" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"her parti başına dakika. (Isıtmanın tamamlanması ne kadar sürerse buna " +"bağlıdır.)" + +msgid "Task Sending" +msgstr "Görev Gönderme" + +msgid "Task Sent" +msgstr "Görev Gönderildi" + +msgid "Edit multiple printers" +msgstr "Birden fazla yazıcıyı düzenleme" + +msgid "Select connected printers (0/6)" +msgstr "Bağlı yazıcıları seçin (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Bağlı Yazıcıları Seçin (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Seçilebilecek maksimum yazıcı sayısı %d'dır" + +msgid "No task" +msgstr "Görev yok" + +msgid "Edit Printers" +msgstr "Yazıcıları Düzenle" + +msgid "Task Name" +msgstr "Görev Adı" + +msgid "Actions" +msgstr "İşlemler" + +msgid "Task Status" +msgstr "Görev durumu" + +msgid "Sent Time" +msgstr "Gönderilen Zaman" + +msgid "There are no tasks to be sent!" +msgstr "Gönderilecek görev yok!" + +msgid "No historical tasks!" +msgstr "Tarihi görevler yok!" + +msgid "Upgrading" +msgstr "Yükseltiliyor" + +msgid "syncing" +msgstr "Senkronize ediliyor" + +msgid "Printing Finish" +msgstr "Yazdırma Bitti" + +msgid "Printing Failed" +msgstr "Yazdırma Başarısız" + +msgid "Printing Pause" +msgstr "Yazdırma Duraklatıldı" + +msgid "Pending" +msgstr "Askıda" + +msgid "Sending" +msgstr "Gönderiliyor" + +msgid "Sending Finish" +msgstr "Gönderme Bitti" + +msgid "Sending Cancel" +msgstr "Gönderme İptal Oldu" + +msgid "Sending Failed" +msgstr "Gönderim Başarısız" + +msgid "Print Success" +msgstr "Yazdırma Başarılı" + +msgid "Print Failed" +msgstr "Yazdırma Başarısız" + +msgid "Removed" +msgstr "Kaldırıldı" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, daha " -"küçük bir katman yüksekliğine sahiptir ve daha az ama yine de görünür katman " -"çizgileri ve biraz daha yüksek baskı kalitesi sağlar, ancak bazı yazdırma " -"durumlarında daha uzun yazdırma süresi sağlar." msgid "Connected to Obico successfully!" msgstr "Obico'ya başarıyla bağlanıldı!" @@ -16308,11 +20432,11 @@ msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "" "SimplyPrint hesabı bağlı değil. Ayarlamak için Bağlantı seçeneklerine gidin." -msgid "Connection to Flashforge works correctly." -msgstr "Flashforge bağlantısı düzgün çalışıyor." +msgid "Serial connection to Flashforge is working correctly." +msgstr "Flashforge'a seri bağlantı düzgün çalışıyor." -msgid "Could not connect to Flashforge" -msgstr "Flashforge'a bağlanılamadı" +msgid "Could not connect to Flashforge via serial" +msgstr "Flashforge'a seri bağlantı yoluyla bağlanılamadı" msgid "The provided state is not correct." msgstr "Sağlanan durum doğru değil." @@ -16324,9 +20448,114 @@ msgid "Something unexpected happened when trying to log in, please try again." msgstr "" "Giriş yapmaya çalışırken beklenmeyen bir şey oldu, lütfen tekrar deneyin." -msgid "User cancelled." +msgid "User canceled." msgstr "Kullanıcı iptal edildi." +msgid "Head diameter" +msgstr "Kafa çapı" + +msgid "Max angle" +msgstr "Maksimum açı" + +msgid "Detection radius" +msgstr "Algılama yarıçapı" + +msgid "Remove selected points" +msgstr "Seçili noktaları kaldır" + +msgid "Remove all" +msgstr "Hepsini kaldır" + +msgid "Auto-generate points" +msgstr "Noktaları otomatik olarak üret" + +msgid "Add a brim ear" +msgstr "Destek kulağı ekle" + +msgid "Delete a brim ear" +msgstr "Destek kulağı sil" + +msgid "Adjust head diameter" +msgstr "Kafa çapını ayarlayın" + +msgid "Adjust section view" +msgstr "Kesit görünümünü ayarla" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Uyarı: Siperlik tipi \"boyalı\" olarak ayarlanmamışsa, siperlik kulakları " +"etkili olmayacaktır!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Bu nesnenin kenar türünü \"boyalı\" olarak ayarlayın" + +msgid " invalid brim ears" +msgstr " geçersi̇z kenarlı kulaklar" + +msgid "Brim Ears" +msgstr "Kenar kulakları" + +msgid "Please select single object." +msgstr "Lütfen tek bir nesne seçin." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16346,7 +20575,8 @@ msgid "" msgstr "" "Sandviç modu\n" "Modelinizde çok dik çıkıntılar yoksa hassasiyeti ve katman tutarlılığını " -"artırmak için sandviç modunu (iç-dış-iç) kullanabileceğinizi biliyor muydunuz?" +"artırmak için sandviç modunu (iç-dış-iç) kullanabileceğinizi biliyor " +"muydunuz?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" @@ -16405,17 +20635,17 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Klavye kısayolları nasıl kullanılır?\n" -"Snapmaker Orca'ın çok çeşitli klavye kısayolları ve 3B sahne işlemleri sunduğunu " -"biliyor muydunuz?" +"Snapmaker Orca'ın çok çeşitli klavye kısayolları ve 3D sahne işlemleri " +"sunduğunu biliyor muydunuz?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" "Reverse on odd\n" -"Did you know that Reverse on odd feature can significantly improve the " -"surface quality of your overhangs?" +"Did you know that Reverse on odd feature can significantly improve " +"the surface quality of your overhangs?" msgstr "" "Tersine çevir\n" "Tersine çevir özelliğinin çıkıntılarınızın yüzey kalitesini önemli " @@ -16438,8 +20668,8 @@ msgid "" "problems on the Windows system?" msgstr "" "Modeli Düzelt\n" -"Windows sisteminde birçok dilimleme sorununu önlemek için bozuk bir 3D modeli " -"düzeltebileceğinizi biliyor muydunuz?" +"Windows sisteminde birçok dilimleme sorununu önlemek için bozuk bir 3D " +"modeli düzeltebileceğinizi biliyor muydunuz?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -16452,7 +20682,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Otomatik Düzenleme\n" "Projenizdeki tüm nesneleri otomatik olarak düzenleyebileceğinizi biliyor " @@ -16462,7 +20692,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Otomatik Yönlendirme\n" "Basit bir tıklamayla nesneleri yazdırma için en uygun yöne " @@ -16551,7 +20781,7 @@ msgid "" "Snapmaker Orca supports slicing STEP files, providing smoother results than a " "lower resolution STL. Give it a try!" msgstr "" -"ADIM\n" +"STEP\n" "STL yerine STEP dosyasını dilimleyerek baskı kalitenizi artırabileceğinizi " "biliyor muydunuz?\n" "Snapmaker Orca, STEP dosyalarını dilimlemeyi destekleyerek daha düşük " @@ -16572,9 +20802,9 @@ msgstr "" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" -"Did you know that flow rate can be fine-tuned for even better-looking prints? " -"Depending on the material, you can improve the overall finish of the printed " -"model by doing some fine-tuning." +"Did you know that flow rate can be fine-tuned for even better-looking " +"prints? Depending on the material, you can improve the overall finish of the " +"printed model by doing some fine-tuning." msgstr "" "Akış hızı için ince ayar\n" "Baskıların daha da iyi görünmesi için akış hızına ince ayar yapılabileceğini " @@ -16608,8 +20838,8 @@ msgstr "" msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature " -"makes it easy to place the support material only on the sections of the model " -"that actually need it." +"makes it easy to place the support material only on the sections of the " +"model that actually need it." msgstr "" "Destek boyama\n" "Desteklerinizin yerini boyayabileceğinizi biliyor muydunuz? Bu özellik, " @@ -16643,7 +20873,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Daha iyi yapışma için kenar\n" @@ -16654,7 +20884,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Birden çok nesne için parametreleri ayarlama\n" "Seçilen tüm nesneler için dilimleme parametrelerini aynı anda " @@ -16671,8 +20901,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "Desteğe/nesnelere/dolguya hizalayın\n" "Filament değişimi sırasında, boşa harcanan filamenti desteğe/nesnelere/" @@ -16688,13 +20918,13 @@ msgstr "" "Modelin gücünü artırmak için daha fazla duvar halkası ve daha yüksek seyrek " "dolgu yoğunluğu kullanabileceğinizi biliyor muydunuz?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Yazıcı kapısı açıkken yazdırmanız gerektiğinde\n" "Yazıcı kapısının açılmasının, daha yüksek muhafaza sıcaklığıyla daha düşük " @@ -16707,13 +20937,1800 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Eğilmeyi önleyin\n" "ABS gibi bükülmeye yatkın malzemelere baskı yaparken, ısıtma yatağı " "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını " "azaltabileceğini biliyor muydunuz?" +#~ msgid "Junction Deviation calibration" +#~ msgstr "Köşe sapması kalibrasyonu" + +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Ekstruder %d" + +#~ msgid "" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" +#~ msgstr "" +#~ "Maksimum köşe sapması (M205 J, yalnızca Marlin Firmware için JD > 0 ise " +#~ "geçerlidir)" + +#~ msgid "Adaptive layer height" +#~ msgstr "Uyarlanabilir katman yüksekliği" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Bu seçeneğin etkinleştirilmesi, ilki hariç ağaç destek katmanının " +#~ "yüksekliğinin otomatik olarak hesaplanacağı anlamına gelir." + +#~ msgid "Junction Deviation test" +#~ msgstr "Köşe sapma testi" + +#~ msgid "Start junction deviation: " +#~ msgstr "Başlangıç köşe sapması: " + +#~ msgid "End junction deviation: " +#~ msgstr "Bitiş köşe sapması: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Köşe sapma ayarları" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "" +#~ "Not: Daha düşük değerler = daha keskin köşeler ancak daha yavaş hızlar" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" +#~ msgstr "" +#~ "Lütfen geçerli değerler girin:\n" +#~ "(0 <= Köşe Sapması < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "Not: Yüksek değerler katman kaymasına neden olabilir" + +#~ msgid "AMS not connected" +#~ msgstr "AMS bağlı değil" + +#~ msgid "Ext Spool" +#~ msgstr "Harici Makara" + +#~ msgid "Guide" +#~ msgstr "Rehber" + +#~ msgid "Calibrating AMS..." +#~ msgstr "AMS kalibre ediliyor..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Kalibrasyon sırasında bir sorun oluştu. Çözümü görüntülemek için tıklayın." + +#~ msgid "Calibrate again" +#~ msgstr "Tekrar kalibre edin" + +#~ msgid "Cancel calibration" +#~ msgstr "Kalibrasyonu iptal et" + +#~ msgid "Feed Filament" +#~ msgstr "Filament Ekstrude" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "LAN yoluyla yazdırmadan önce bir SD kartın takılması gerekir." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Yazıcıya göndermeden önce bir SD kartın takılması gerekir." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "Not: Yalnızca aynı malzeme türüne sahip AMS yuvaları seçilebilir." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Eğer AMS'de iki aynı filament bulunursa, AMS filament yedekleme özelliği " +#~ "etkinleştirilecektir.\n" +#~ "(Şu anda aynı markaya ait sarf malzemelerinin otomatik temini " +#~ "desteklenmektedir, malzeme türü ve rengi)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS, filament bilgisi güncellendikten sonra Bambu filamentin kalan " +#~ "kapasitesini tahmin edecek. Yazdırma sırasında kalan kapasite otomatik " +#~ "olarak güncellenecektir." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Önerilen minimum sıcaklık 190 dereceden azdır veya önerilen maksimum " +#~ "sıcaklık 300 dereceden yüksektir.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Spiral mod yalnızca duvar döngüleri 1 olduğunda, destek devre dışı " +#~ "bırakıldığında, üst kabuk katmanları 0 olduğunda, seyrek dolgu yoğunluğu " +#~ "0 olduğunda ve timelapse türü geleneksel olduğunda çalışır." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Süpürme XY mekanik modu" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Filament bittiği için duraklatıldı" + +#~ msgid "Heating hotend" +#~ msgstr "Hotend ısıtılıyor" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Ekstrüzyon kalibre ediliyor" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Yazdırma kullanıcı tarafından duraklatıldı" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Ön kapağın düşmesinin duraklaması" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Ekstrüzyon akışını kalibre et" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Nozul sıcaklığı arızası nedeniyle duraklatıldı" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Isı yatağı sıcaklık arızası nedeniyle duraklatıldı" + +#~ msgid "Skip step pause" +#~ msgstr "Adım duraklamasını atla" + +#~ msgid "Motor noise calibration" +#~ msgstr "Motor ses kalibrasyonu" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "AMS kaybı nedeniyle durduruldu" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Isı kesme fanının düşük hızı nedeniyle duraklatıldı" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Oda sıcaklığı kontrol hatası nedeniyle duraklatıldı" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Kullanıcı tarafından eklenen Gcode tarafından duraklatıldı" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Nozul filament ile kaplı algılandı duraklatılıyor" + +#~ msgid "Cutter error pause" +#~ msgstr "Kesici hatası duraklatılıyor" + +#~ msgid "First layer error pause" +#~ msgstr "İlk katman hatası duraklatılıyor" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Nozul tıkanıklığı duraklatılıyor" + +#~ msgid "Fatal" +#~ msgstr "Kritik" + +#~ msgid "Serious" +#~ msgstr "Ciddi" + +#~ msgid "Common" +#~ msgstr "Yaygın" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Mevcut hazne sıcaklığı veya hedef hazne sıcaklığı 45 ° C'yi aşıyor " +#~ "Ekstruder tıkanmasını önlemek için düşük sıcaklıkta filament (PLA / " +#~ "PETG / TPU) yüklenmesine izin verilmez." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Ekstrudere düşük sıcaklıkta filament (PLA / PETG / TPU) yüklendi. " +#~ "Ekstruder tıkanmasını önlemek için hazne sıcaklığının 45 ° C'nin üzerine " +#~ "ayarlanmasına izin verilmez." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF, AMS tarafından desteklenNozulktedir." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Plaka sınırının üzerine bir nesne döşenir veya yükseklik sınırını aşar.\n" +#~ "Lütfen sorunu tamamen plakanın üzerine veya dışına hareket ettirerek ve " +#~ "yüksekliğin yapım hacmi dahilinde olduğunu doğrulayarak çözün." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Bunu \"Ayarlar > Ağ > Bağlantı kodu\" bölümünde bulabilirsiniz.\n" +#~ "şekilde gösterildiği gibi yazıcıda:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "SD karttaki dosyaya göz atmak mevcut donanım yazılımında desteklenmiyor. " +#~ "Lütfen yazıcının ürün yazılımını güncelleyin." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Lütfen SD kartın yazıcıya takılı olup olmadığını kontrol edin.\n" +#~ "Hala okunamıyorsa SD kartı biçimlendirmeyi deneyebilirsiniz." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "SD karttaki dosyaya göz atmak Yalnızca LAN Modunda desteklenmez." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Depolama alanı kullanılamıyor, SD kartı takın." + +#~ msgid "Cham" +#~ msgstr "Bölme" + +#~ msgid "Still unload" +#~ msgstr "Daha Fazla Boşalt" + +#~ msgid "Still load" +#~ msgstr "Daha Fazla Yükle" + +#~ msgid "Can't start this without SD card." +#~ msgstr "SD kart olmadan başlatılamıyor." + +#~ msgid "Update" +#~ msgstr "Güncelle" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Duraklatma hassasiyeti" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "AMS filamentleri yok. AMS bilgilerini yüklemek için lütfen 'Cihaz' " +#~ "sayfasında bir yazıcı seçin." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Filamentleri AMS ile senkronize etmek, seçili tüm mevcut filament ön " +#~ "ayarlarını ve renklerini kaldıracaktır. Devam etmek istiyor musun?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Zaten bir senkronizasyon yaptınız. Yalnızca değişiklikleri senkronize " +#~ "etmek mi yoksa tümünü yeniden senkronize etmek mi istiyorsunuz?" + +#~ msgid "Sync" +#~ msgstr "Senkronizasyon" + +#~ msgid "Resync" +#~ msgstr "Yeniden eşitleme" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Genel ön ayara eşlenen bazı bilinmeyen filamentler var. Sistem ön " +#~ "ayarlarında bir güncelleme olup olmadığını kontrol etmek için lütfen Orca " +#~ "Slicer'ı güncelleyin veya Snapmaker Orca'ı yeniden başlatın." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Orijinal SVG'leri yerel yollarıyla birlikte 3MF dosyasına depolamak " +#~ "istediğinizden emin misiniz?\n" +#~ "'HAYIR' tuşuna basarsanız projedeki tüm SVG'ler artık düzenlenemez." + +#~ msgid "Private protection" +#~ msgstr "Özel koruma" + +#~ msgid "General Settings" +#~ msgstr "Genel Ayarlar" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Başlangıçtan sonra \"Günün ipucu\" bildirimini göster" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Etkinleştirilirse başlangıçta faydalı ipuçları görüntülenir." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Hacimleri temizleme: Renk her değiştiğinde otomatik olarak hesapla." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Etkinleştirilirse, renk her değiştiğinde otomatik hesapla." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Yıkama hacimleri: Filament her değiştirildiğinde otomatik olarak " +#~ "hesaplanır." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "Etkinleştirilirse filaman her değiştirildiğinde otomatik hesaplama" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Nesne klonlamadan sonra plakayı otomatik düzenleme" + +#~ msgid "Network" +#~ msgstr "Ağ" + +#~ msgid "User Sync" +#~ msgstr "Kullanıcı Senkronizasyonu" + +#~ msgid "System Sync" +#~ msgstr "Sistem Senkronizasyonu" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "URL’leri Snapmaker Orca ile ilişkilendirin" + +#~ msgid "every" +#~ msgstr "her" + +#~ msgid "Downloads" +#~ msgstr "İndirilenler" + +#~ msgid "Dark Mode" +#~ msgstr "Karanlık Mod" + +#~ msgid "Home page and daily tips" +#~ msgstr "Ana sayfa ve günlük ipuçları" + +#~ msgid "Show home page on startup" +#~ msgstr "Başlangıçta ana sayfayı göster" + +#~ msgid "Please choose the filament color" +#~ msgstr "Lütfen filament rengini seçin" + +#~ msgid "Send print job to" +#~ msgstr "Yazdırma işini şuraya gönder" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "%s filamenti AMS yuvası sayısını aşıyor. AMS yuvası atamasını desteklemek " +#~ "için lütfen yazıcının ürün yazılımını güncelleyin." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament, AMS yuvalarının sayısını aşıyor. AMS yuvası atamasını " +#~ "desteklemek için lütfen yazıcının ürün yazılımını güncelleyin." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "AMS slot eşlemelerine yönelik filament oluşturulmuştur. Eşleme AMS " +#~ "yuvasını değiştirmek için yukarıdaki filamentlerden birine " +#~ "tıklayabilirsiniz" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Yazdırma işini göndermeden önce eşleme AMS yuvasını belirtmek için lütfen " +#~ "yukarıdaki her filamente tıklayın" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Yazıcı ürün yazılımı yalnızca filament => AMS yuvasının sıralı eşlemesini " +#~ "destekler." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Yazdırmadan önce bir SD kartın takılması gerekir." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "" +#~ "Hızlandırılmış çekim kaydetmek için bir SD kartın takılması gerekir." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "ön ayardaki nozul: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "hafızaya alınan nozul: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Dilimlenmiş dosyadaki nozül çapınız hafızaya alınan nozül ile tutarlı " +#~ "değil. Püskürtme ucunuzu yakın zamanda değiştirdiyseniz ayarları " +#~ "değiştirmek için lütfen Cihaz > Yazıcı Parçaları’na gidin." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Yüksek sıcaklıktaki malzemeyi (%s malzeme) %s ile yazdırmak püskürtme ucu " +#~ "hasarına neden olabilir" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "Yazıcıya bağlanılıyor. Bağlantı işlemi sırasında iptal edilemiyor." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Kullanmaya dikkat edin! Dokulu PEI Plakasındaki akış kalibrasyonu, " +#~ "dağınık yüzey nedeniyle başarısız olabilir." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Mikro Lidar kullanarak otomatik akış kalibrasyonu" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Yazıcı SD kartına gönder" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Yazıcı SD kartına gönderilmeden önce bir SD kartın takılması gerekir." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Yazıcı, yazıcı SD kartına gönderimi desteklemiyor." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Renk sayısı aralıkta olmalıdır [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Mevcut filament renkleri:" + +#~ msgid "Quick set:" +#~ msgstr "Hızlı ayar:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "" +#~ "Mevcut ekstrüderlerden sonra yeni sarf malzemesi ekstrüderi ekleyin." + +#~ msgid "Cluster colors" +#~ msgstr "Küme renkleri" + +#~ msgid "Map Filament" +#~ msgstr "Filamenti Eşle" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Not: Renk seçildi, devam etmek için Tamam'ı seçebilirsiniz\n" +#~ "veya manuel olarak ayarlayabilirsiniz." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Uyarı: Yeni eklenen ve\n" +#~ "mevcut ekstrüderlerin sayısı 16'yı aşıyor." + +#~ msgid "Auto-Calc" +#~ msgstr "Otomatik Hesaplama" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca, filamentlerin rengi her değiştiğinde yıkama hacimlerinizi yeniden " +#~ "hesaplar. Otomatik hesaplamayı Snapmaker Orca > Tercihler bölümünden devre " +#~ "dışı bırakabilirsiniz" + +#~ msgid "unloaded" +#~ msgstr "boşaltılmış" + +#~ msgid "loaded" +#~ msgstr "yüklenmiş" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "İtibaren" + +#~ msgid "To" +#~ msgstr "İle" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Yazdırmaya Devam Et (kusurlar kabul edilebilir)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Yazdırmaya Devam Et (sorun çözüldü)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "1. Adım: Lütfen Snapmaker Orca ve yazıcınızın aynı LAN’da olduğunu onaylayın." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "2. Adım: Aşağıdaki IP ve Erişim Kodu yazıcınızdaki gerçek değerlerden " +#~ "farklıysa, lütfen bunları düzeltin." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "3. Adım: Lütfen yazıcı tarafından cihaz SN’sini edinin; genellikle yazıcı " +#~ "ekranındaki cihaz bilgilerinde bulunur." + +#~ msgid "Laser 10 W" +#~ msgstr "Lazer 10 W" + +#~ msgid "Laser 40 W" +#~ msgstr "Lazer 40 W" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "" +#~ " başkalarına çok yakınsa, yazdırma sırasında çarpışmalar meydana " +#~ "gelebilir." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Birlikte büyük sıcaklık farkına sahip birden fazla filament basılamaz. " +#~ "Aksi takdirde baskı sırasında ekstruder ve nozul tıkanabilir veya hasar " +#~ "görebilir." + +#~ msgid "Ironing angle" +#~ msgstr "Ütüleme açısı" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Köşebent ütüleme işlemi yapılır. Negatif bir sayı bu işlevi devre dışı " +#~ "bırakır ve varsayılan yöntemi kullanır." + +#~ msgid "Remove small overhangs" +#~ msgstr "Küçük çıkıntıları kaldır" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Muhtemelen desteğe ihtiyaç duymayan küçük çıkıntıları kaldırın." + +#~ msgid "Width of the brim." +#~ msgstr "Kenar genişliği." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Aynı ada sahip sonuçlardan yalnızca biri kaydedilecektir. Diğer sonuçları " +#~ "geçersiz kılmak istediğinizden emin misiniz?" + +#~ msgid "External Spool" +#~ msgstr "Harici Makara" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Lütfen geçerli değerleri girin:\n" +#~ "Başlangıç sıcaklığı: <= 350\n" +#~ "Bitiş sıcaklığı: >= 170\n" +#~ "Başlangıç sıcaklığı > Bitiş sıcaklığı + 5)" + +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Öneri: Nemlendirme değerini 0 olarak ayarlayın.\n" +#~ "Bu, yazıcının varsayılan değerini veya son kaydedilen değeri " +#~ "kullanacaktır." + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "Özel yazıcı veya model girilmedi lütfen giriş yapın." + +#~ msgid "BigTraffic" +#~ msgstr "Yoğun trafik" + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "önceden ayarlanmış nozul: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Ön ayardaki nozul çapınız hafızaya alınan nozul çapıyla tutarlı değil. " +#~ "Son zamanlarda nozulunuzu değiştirdiniz mi?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "" +#~ "%s malzemesini %s ile yazdırmak püskürtme ucu hasarına neden olabilir" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency." +#~ msgstr "" +#~ "Dış duvar aralığını ayarlayarak kabuk hassasiyetini artırın. Bu aynı " +#~ "zamanda katman tutarlılığını da artırır." + +#~ msgid "Enable filament ramming." +#~ msgstr "Filament sıkıştırmayı etkinleştir." + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Fare tekerleği" + +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + Fare tekerleği" + +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + Sol fare düğmesi" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" + +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + Fare yukarı veya aşağı hareket ettirir" + +#~ msgid "Left mouse button:" +#~ msgstr "Sol fare tuşu:" + +#~ msgid "Right mouse button:" +#~ msgstr "Sağ fare tuşu:" + +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + Sol fare düğmesi:" + +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + Sağ fare düğmesi:" + +#~ msgid "Recent projects" +#~ msgstr "Son Projeler" + +#~ msgid "Maximum recent projects" +#~ msgstr "Maksimum yeni proje" + +#~ msgid "Maximum count of recent projects" +#~ msgstr "Maksimum yeni proje sayısı" + +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" + +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" + +#~ msgid "Shift+A" +#~ msgstr "Shift+A" + +#~ msgid "Shift+Q" +#~ msgstr "Shift+Q" + +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" + +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+Herhangi bir ok" + +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Sol fare düğmesi" + +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Sol fare düğmesi" + +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+Herhangi bir yön tuşu" + +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Sol fare düğmesi" + +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Sol fare düğmesi" + +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Sol fare düğmesi" + +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+Herhangi bir ok tuşu" + +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Fare tekerleği" + +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Fare tekerleği" + +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Fare tekerleği" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+Fare tekerleği" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+Fare tekerleği" + +#~ msgid "" +#~ "This parameter adds a rotation of sparse infill direction to each layer " +#~ "according to the specified template. The template is a comma-separated " +#~ "list of angles in degrees, e.g. '0,90'. The first angle is applied to the " +#~ "first layer, the second angle to the second layer, and so on. If there " +#~ "are more layers than angles, the angles will be repeated. Note that not " +#~ "all sparse infill patterns support rotation." +#~ msgstr "" +#~ "Bu parametre, belirtilen şablona göre her katmana seyrek dolgu yönünde " +#~ "bir dönüş ekler. Şablon, derece cinsinden virgülle ayrılmış bir açı " +#~ "listesidir (örneğin, '0,90'). İlk açı ilk katmana, ikinci açı ikinci " +#~ "katmana uygulanır ve bu şekilde devam eder. Açı sayısından fazla katman " +#~ "varsa, açılar tekrarlanır. Tüm seyrek dolgu desenlerinin dönüşü " +#~ "desteklemediğini unutmayın." + +#~ msgid "" +#~ "The remaining part of the model contour after removing a certain depth " +#~ "from the surface is called the skeleton. This parameter is used to adjust " +#~ "the density of this section. When two regions have the same sparse infill " +#~ "settings but different skeleton densities, their skeleton areas will " +#~ "develop overlapping sections.default is as same as infill density." +#~ msgstr "" +#~ "Model konturunun yüzeyden belirli bir derinlik kaldırıldıktan sonraki " +#~ "kalan kısmına iskelet denir. Bu parametre, bu bölümün yoğunluğunu " +#~ "ayarlamak için kullanılır. İki bölge aynı seyrek dolgu ayarlarına sahip " +#~ "ancak farklı iskelet yoğunluklarına sahip olduğunda, iskelet alanları üst " +#~ "üste binen bölümler geliştirir. Varsayılan değer, dolgu yoğunluğuyla " +#~ "aynıdır." + +#~ msgid "" +#~ "The portion of the model's outer surface within a certain depth range is " +#~ "called the skin. This parameter is used to adjust the density of this " +#~ "section. When two regions have the same sparse infill settings but " +#~ "different skin densities, This area will not be split into two separate " +#~ "regions.default is as same as infill density." +#~ msgstr "" +#~ "Modelin dış yüzeyinin belirli bir derinlik aralığındaki kısmına yüzey adı " +#~ "verilir. Bu parametre, bu bölümün yoğunluğunu ayarlamak için kullanılır. " +#~ "İki bölge aynı seyrek dolgu ayarlarına sahip ancak farklı yüzey " +#~ "yoğunluklarına sahip olduğunda, bu alan iki ayrı bölgeye bölünmez. " +#~ "Varsayılan değer, dolgu yoğunluğuyla aynıdır." + +#~ msgid "Set Position" +#~ msgstr "Pozisyonu ayarla" + +#~ msgid "%" +#~ msgstr "%" + +#~ msgid "%1%" +#~ msgstr "%1%" + +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Model nesnesini düzeltmek için simgeye sağ tıklayın" + +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "Hedef nesne yalnızca bir parça içerir ve bölünemez." + +#~ msgid "?" +#~ msgstr "?" + +#~ msgid "/" +#~ msgstr "/" + +#~ msgid "℃" +#~ msgstr "°C" + +#~ msgid "mm³" +#~ msgstr "mm³" + +#~ msgid "Color Scheme" +#~ msgstr "Renk Şeması" + +#~ msgid "Percent" +#~ msgstr "Yüzde" + +#~ msgid "Used filament" +#~ msgstr "Kullanılan" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Daha fazla..." + +#~ msgid "More calibrations" +#~ msgstr "Daha fazla kalibrasyon" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "Hafıza kartı" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "SD Kart Yok" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD Kart Anormal" + +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "%s(%s) aygıtının çıkarılması başarısız oldu." + +#~ msgid "mm/s²" +#~ msgstr "mm/s²" + +#~ msgid "mm/s" +#~ msgstr "mm/s" + +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "" +#~ "Bu seçenek daha sonra ‘Yükleme Davranışı’ altındaki tercihlerde " +#~ "değiştirilebilir." + +#~ msgid "Invalid number" +#~ msgstr "Geçersiz numara" + +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "hafızaya alınan nozul: %.2f %s" + +#~ msgid "" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." +#~ msgstr "" +#~ "Cool Plate takıldığında yatak sıcaklığı. 0 değeri, filamentin Cool Plate " +#~ "SuperTack üzerine yazdırmayı desteklemediği anlamına gelir" + +#~ msgid "Ramming settings" +#~ msgstr "Sıkıştırma ayarları" + +#~ msgid "Profile dependencies" +#~ msgstr "Profil Bağımlılıkları" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "yapılandırma paketi mevcut APP ile uyumlu değil." + +#~ msgid "Total ramming time" +#~ msgstr "Toplam sıkıştırma süresi" + +#~ msgid "s" +#~ msgstr "s" + +#~ msgid "Total rammed volume" +#~ msgstr "Toplam sıkıştırılmış hacim" + +#~ msgid "Ramming line width" +#~ msgstr "Sıkıştırma hattı genişliği" + +#~ msgid "Ramming line spacing" +#~ msgstr "Sıkıştırma hattı aralığı" + +#~ msgid "Shift+R" +#~ msgstr "Shift+R" + +#~ msgid "resume" +#~ msgstr "Devam et" + +#~ msgid "°C" +#~ msgstr "°C" + +#~ msgid "Classic mode" +#~ msgstr "Klasik mod" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Klasik modu kullanmak için bu seçeneği etkinleştirin" + +#~ msgid "Compatible machine" +#~ msgstr "Uyumlu makine" + +#~ msgid "Compatible machine condition" +#~ msgstr "Uyumlu makine durumu" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Uyumlu süreç profillerinin durumu" + +#~ msgid "Default filament color" +#~ msgstr "Varsayılan filament rengi" + +#~ msgid "mm³/s" +#~ msgstr "mm³/s" + +#~ msgid "g/cm³" +#~ msgstr "g/cm³" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Katı dolgu yönünü döndür" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Katı dolgu yönünü her katman için 90° döndürün." + +#~ msgid "" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" +#~ msgstr "" +#~ "Akış Telafisi Modeli, küçük dolgu alanları için akışı ayarlamak için " +#~ "kullanılır. Model, ekstrüzyon uzunluğu ve akış düzeltme faktörleri için " +#~ "virgülle ayrılmış değer çifti olarak, her satıra bir tane olmak üzere " +#~ "aşağıdaki formatta ifade edilir: \"1.234,5.678\"" + +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Ekstruder için yazdırılabilir en büyük katman yüksekliği. Uyarlanabilir " +#~ "katman yüksekliği etkinleştirildiğinde maksimum katman yüksekliğini " +#~ "sınırlamak için kullanılır" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "" +#~ "Ekstruder için yazdırılabilir en düşük katman yüksekliği. Kullanılan tp, " +#~ "uyarlanabilir katman yüksekliğini etkinleştirirken minimum katman " +#~ "yüksekliğini sınırlar" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "Üst katmanda geri çek" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "Üst katmanda geri çekilmeye zorlayın. Devre dışı bırakmak, Hilbert eğrisi " +#~ "gibi küçük hareketlerin olduğu çok yavaş modellerde tıkanmayı önleyebilir" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "Uzun seyahat sırasında sızıntıyı önlemek için ekstruderdeki malzemenin " +#~ "bir kısmı geri çekilir. Geri çekmeyi devre dışı bırakmak için sıfır " +#~ "ayarlayın" + +#~ msgid "Speed of retractions." +#~ msgstr "Geri çekme hızları" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "" +#~ "Filamenti ekstrudere yeniden yükleme hızı. Sıfır, geri çekilmeyle aynı " +#~ "hız anlamına gelir" + +#~ msgid "Single loop draft shield" +#~ msgstr "Tek döngülü draft kalkanı" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "İlk katmandan sonra draft kalkanı döngülerini tek bir duvarla sınırlar. " +#~ "Bu, bazen filament tasarrufu sağlamak için faydalı olabilir, ancak draft " +#~ "kalkanının bükülmesine veya çatlamasına neden olabilir." + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Arayüz çizgilerinin aralığı. Sıfır, sağlam arayüz anlamına gelir" + +#~ msgid "" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." +#~ msgstr "" +#~ "İnce özellikler için minimum kalınlık. Bu değerden daha ince olan model " +#~ "özellikleri yazdırılmayacak, Minimum özellik boyutundan daha kalın olan " +#~ "özellikler ise Minimum duvar genişliğine genişletilecektir. Nozul çapı " +#~ "üzerinden yüzde olarak ifade edilir" + +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "güncellemeyi kullanırken güncelleme işlemi/yazıcıayarlarını yükle" + +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "güncellemeyi kullanırken güncelleme filament ayarlarını yükle" + +#~ msgid "Downward machines settings" +#~ msgstr "Düşüşteki makinelerin ayarları" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "Her nesne için filaman kimliklerini yükleyin" + +#~ msgid "" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" +#~ msgstr "" +#~ "Artık farklı filamentler için tamamen otomatik olan otomatik kalibrasyonu " +#~ "ekledik ve sonuç ileride kullanılmak üzere yazıcıya kaydedilecek. " +#~ "Kalibrasyonu yalnızca aşağıdaki sınırlı durumlarda yapmanız gerekir:\n" +#~ "1. Farklı marka/modelde yeni bir filament taktıysanız veya filament " +#~ "nemliyse;\n" +#~ "2. Nozul aşınmışsa veya yenisiyle değiştirilmişse;\n" +#~ "3. Filament ayarında maksimum hacimsel hız veya baskı sıcaklığı " +#~ "değiştirilirse." + +#~ msgid "step: " +#~ msgstr "adım: " + +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "STL'i yükle" + +#~ msgid "Load svg" +#~ msgstr "Svg'yi yükle" + +#~ msgid "Back Page 1" +#~ msgstr "Arka Sayfa 1" + +#~ msgid "Delete Filament" +#~ msgstr "Filamenti Sil" + +#~ msgid "Refresh Printers" +#~ msgstr "Yazıcıları Yenile" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "0,2 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +#~ "katman yüksekliği daha küçüktür ve neredeyse görünmez katman çizgileri ve " +#~ "daha yüksek baskı kalitesi, ancak daha kısa yazdırma süresi sağlar." + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "Varsayılan 0,2 mm püskürtme ucu profiliyle karşılaştırıldığında, daha " +#~ "küçük katman yüksekliğine sahiptir ve minimum katman çizgileri ve daha " +#~ "yüksek baskı kalitesi sağlar, ancak daha kısa yazdırma süresi sağlar." + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "Çok büyük bir katman yüksekliğine sahiptir ve çok belirgin katman " +#~ "çizgilerine, düşük baskı kalitesine ve genel yazdırma süresine neden olur." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +#~ "daha büyük bir katman yüksekliğine sahiptir ve çok belirgin katman " +#~ "çizgileri ve çok daha düşük baskı kalitesiyle sonuçlanır, ancak bazı " +#~ "yazdırma durumlarında daha kısa yazdırma süresi sağlar." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +#~ "çok daha büyük bir katman yüksekliğine sahiptir ve son derece belirgin " +#~ "katman çizgileri ve çok daha düşük baskı kalitesiyle sonuçlanır, ancak " +#~ "bazı yazdırma durumlarında çok daha kısa yazdırma süresi sağlar." + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "0,8 mm’lik püskürtme ucunun varsayılan profiliyle karşılaştırıldığında, " +#~ "daha küçük bir katman yüksekliğine sahiptir ve daha az ama yine de " +#~ "görünür katman çizgileri ve biraz daha yüksek baskı kalitesi sağlar, " +#~ "ancak bazı yazdırma durumlarında daha uzun yazdırma süresi sağlar." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Flashforge bağlantısı düzgün çalışıyor." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Flashforge'a bağlanılamadı" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Kenar tipini \"boyalı\" olarak ayarlayın" + +#~ msgid "" +#~ "How to use keyboard shortcuts\n" +#~ "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts " +#~ "and 3D scene operations." +#~ msgstr "" +#~ "Klavye kısayolları nasıl kullanılır?\n" +#~ "Snapmaker Orca'ın çok çeşitli klavye kısayolları ve 3B sahne işlemleri " +#~ "sunduğunu biliyor muydunuz?" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Daha küçük destek hacmine ancak daha zayıf güce sahip deneysel bir tarz " +#~ "olan \"Tree Slim\" ekledik.\n" +#~ "Şunlarla kullanmanızı öneririz: 0 arayüz katmanı, 0 üst mesafe, 2 duvar." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "\"Güçlü Ağaç\" ve \"Ağaç Hibrit\" stilleri için şu ayarları öneriyoruz: " +#~ "en az 2 arayüz katmanı, en az 0,1 mm üst z mesafesi veya arayüzde destek " +#~ "malzemeleri kullanılması." + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "Çift duvarlı dal çapı" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "Bu çaptaki bir dairenin alanından daha büyük alana sahip dallar, " +#~ "stabilite için çift duvarlı olarak basılacaktır. Çift duvar olmaması için " +#~ "bu değeri sıfır olarak ayarlayın." + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "Bu ayar desteğin etrafındaki duvarların sayısını belirtir" + +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "Destek: %d katmanında takım yolu oluştur" + +#~ msgid "Support: detect overhangs" +#~ msgstr "Destek: çıkıntıları tespit et" + +#~ msgid "Support: propagate branches" +#~ msgstr "Destek: dal şeklinde oluştur" + +#~ msgid "Support: draw polygons" +#~ msgstr "Destek: çokgen çizme" + +#~ msgid "Support: generate toolpath" +#~ msgstr "Destek: takım yolu oluştur" + +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "Destek: %d katmanında çokgenler oluşturma" + +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "Destek: %d katmanındaki delikleri düzeltin" + +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "Destek: %d katmanındaki dalları çoğalt" + +#~ msgid "Snapmaker Orca" +#~ msgstr "Snapmaker Orca" + +#~ msgid "Current Cabin humidity" +#~ msgstr "Mevcut Kabin nemi" + +#~ msgid "Stopped." +#~ msgstr "Durdu." + +#~ msgid "Connect failed [%d]!" +#~ msgstr "Bağlantı başarısız oldu [%d]!" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "Başlatma başarısız oldu (Cihaz bağlantısı hazır değil)!" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "" +#~ "Başlatma başarısız oldu (Depolama alanı kullanılamıyor, SD kartı takın.)!" + +#~ msgid "Initialize failed (%s)!" +#~ msgstr "Başlatma başarısız oldu (%s)!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "LAN Bağlantısı Başarısız (Yazdırma dosyası gönderiliyor)" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Adım 1, lütfen Snapmaker Orca ile yazıcınızın aynı LAN'da olduğunu " +#~ "doğrulayın." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Adım 2, aşağıdaki IP ve Erişim Kodu yazıcınızdaki gerçek değerlerden " +#~ "farklıysa lütfen bunları düzeltin." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Adım 3: Paket kaybını ve gecikmeyi kontrol etmek için IP adresine ping " +#~ "atın." + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "Çıkıntı ve köprüler için soğutmayı zorla" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "" +#~ "Daha iyi soğutma elde etmek amacıyla çıkıntı ve köprü için parça soğutma " +#~ "fanı hızını optimize etmek amacıyla bu seçeneği etkinleştirin" + +#~ msgid "Fan speed for overhang" +#~ msgstr "Çıkıntılar için fan hızı" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "Çıkıntı derecesi büyük olan köprü veya çıkıntılı duvara baskı yaparken " +#~ "parça soğutma fanını bu hızda olmaya zorlayın. Çıkıntı ve köprü için " +#~ "soğutmayı zorlamak, bu parça için daha iyi kalite elde edilmesini " +#~ "sağlayabilir" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "Çıkıntı soğutması" + +#, c-format +#~ msgid "" +#~ "Force cooling fan to be specific speed when overhang degree of printed " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " +#~ "cooling for all outer wall no matter how much overhang degree" +#~ msgstr "" +#~ "Yazdırılan parçanın çıkıntı derecesi bu değeri aştığında soğutma fanını " +#~ "belirli bir hıza zorlar. Alt katmandan destek almadan çizginin ne kadar " +#~ "genişlediğini gösteren yüzde olarak ifade edilir. 0, çıkıntı derecesi ne " +#~ "kadar olursa olsun tüm dış duvar için soğutmayı zorlamak anlamına gelir" + +#~ msgid "Bridge infill direction" +#~ msgstr "Köprü dolgu açısı" + +#~ msgid "Bridge density" +#~ msgstr "Köprü dolgu yoğunluğu" + +#~ msgid "" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "" +#~ "Dış köprülerin yoğunluğu. %100 sağlam köprü anlamına gelir. Varsayılan " +#~ "%100'dür." + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" +#~ msgstr "" +#~ "Dış duvar aralığını ayarlayarak kabuk hassasiyetini artırın. Bu aynı " +#~ "zamanda katman tutarlılığını da artırır.\n" +#~ "Not: Bu ayar yalnızca duvar sırası İç-Dış olarak yapılandırıldığında " +#~ "etkili olacaktır." + +#~ msgid "Thick bridges" +#~ msgstr "Kalın köprüler" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "Küçük iç köprüleri filtreleyin (beta)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Bu seçenek, aşırı eğimli veya kavisli modellerde üst yüzeylerdeki " +#~ "yastıklamanın azaltılmasına yardımcı olabilir.\n" +#~ "\n" +#~ "Varsayılan olarak küçük iç köprüler filtrelenir ve iç katı dolgu doğrudan " +#~ "seyrek dolgunun üzerine yazdırılır. Bu çoğu durumda işe yarar ve üstün " +#~ "yüzey kalitesinden çok fazla ödün vermeden yazdırmayı hızlandırır.\n" +#~ "\n" +#~ "Bununla birlikte, özellikle çok düşük seyrek dolgu yoğunluğunun " +#~ "kullanıldığı aşırı eğimli veya kavisli modellerde, bu durum " +#~ "desteklenmeyen katı dolgunun kıvrılmasına ve yastıklanmaya neden olmasına " +#~ "neden olabilir.\n" +#~ "\n" +#~ "Bu seçeneğin devre dışı bırakılması, iç köprü katmanını hafif " +#~ "desteklenmeyen dahili katı dolgu üzerine yazdıracaktır. Aşağıdaki " +#~ "seçenekler filtreleme miktarını, yani oluşturulan dahili köprülerin " +#~ "miktarını kontrol eder.\n" +#~ "\n" +#~ "Filtreli - bu seçeneği etkinleştirin. Bu varsayılan davranıştır ve çoğu " +#~ "durumda iyi çalışır.\n" +#~ "\n" +#~ "Sınırlı filtreli - aşırı eğimli yüzeylerde iç köprüler oluştururken " +#~ "gereksiz iç köprülerin oluşmasını da önler. Bu, çoğu zor modelde işe " +#~ "yarar.\n" +#~ "\n" +#~ "Filtresiz - her potansiyel dahili çıkıntıda dahili köprüler oluşturur. Bu " +#~ "seçenek aşırı eğimli üst yüzey modelleri için kullanışlıdır. Ancak çoğu " +#~ "durumda çok fazla gereksiz köprü oluşturur." + +#~ msgid "" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." +#~ msgstr "" +#~ "Bu fan hızı, yüksek fan hızıyla bağlarını zayıflatabilmek için tüm destek " +#~ "arayüzlerinde uygulanır.\n" +#~ "Bu geçersiz kılmayı devre dışı bırakmak için -1'e ayarlayın.\n" +#~ "Yalnızca devre dışı_fan_first_layers tarafından geçersiz kılınabilir." + +#~ msgid "" +#~ "The minimum printing speed that the printer will slow down to to attempt " +#~ "to maintain the minimum layer time above, when slow down for better layer " +#~ "cooling is enabled." +#~ msgstr "" +#~ "Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yukarıdaki " +#~ "minimum katman süresini korumaya çalışmak için yazıcının yavaşlayacağı " +#~ "minimum yazdırma hızı." + +#~ msgid "ShiftLeft mouse button" +#~ msgstr "Shift + Sol fare düğmesi" + +#~ msgid "Unselect" +#~ msgstr "Seçimi kaldır" + +#~ msgctxt "Verb" +#~ msgid "Scale" +#~ msgstr "Ölçek" + +#~ msgid "Snapmaker Orca " +#~ msgstr "Orca Dilimleyici " + +#~ msgid "Lift Z Enforcement" +#~ msgstr "Z Kaldırma Uygulaması" + +#~ msgid "Z-hop when retract" +#~ msgstr "Geri çekme esnasında Z sıçraması" + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every even layers regardless." +#~ msgstr "" +#~ "Ters çevirmenin faydalı sayılması için çıkıntının mm sayısı olması " +#~ "gerekir. Çevre genişliğinin %’si olabilir.\n" +#~ "0 değeri ne olursa olsun her çift katmanda ters çevirmeyi mümkün kılar." + +#~ msgid "Reverse on odd" +#~ msgstr "Tersine çevir" + +#~ msgid "" +#~ "Extrude perimeters that have a part over an overhang in the reverse " +#~ "direction on odd layers. This alternating pattern can drastically improve " +#~ "steep overhangs.\n" +#~ "\n" +#~ "This setting can also help reduce part warping due to the reduction of " +#~ "stresses in the part walls." +#~ msgstr "" +#~ "Tek katmanlarda ters yönde bir çıkıntının üzerinde bir kısmı bulunan " +#~ "çevreleri ekstrüzyonla çıkarın. Bu alternatif desen, dik çıkıntıları " +#~ "büyük ölçüde iyileştirebilir.\n" +#~ "\n" +#~ "Bu ayar aynı zamanda parça duvarlarındaki gerilimin azalması nedeniyle " +#~ "parçanın bükülmesinin azaltılmasına da yardımcı olabilir." + +#~ msgid "" +#~ "Apply the reverse perimeters logic only on internal perimeters.\n" +#~ "\n" +#~ "This setting greatly reduces part stresses as they are now distributed in " +#~ "alternating directions. This should reduce part warping while also " +#~ "maintaining external wall quality. This feature can be very useful for " +#~ "warp prone material, like ABS/ASA, and also for elastic filaments, like " +#~ "TPU and Silk PLA. It can also help reduce warping on floating regions " +#~ "over supports.\n" +#~ "\n" +#~ "For this setting to be the most effective, it is recommended to set the " +#~ "Reverse Threshold to 0 so that all internal walls print in alternating " +#~ "directions on odd layers irrespective of their overhang degree." +#~ msgstr "" +#~ "Ters çevre mantığını yalnızca iç çevrelere uygulayın.\n" +#~ "\n" +#~ "Bu ayar, parçalar artık farklı yönlerde dağıtıldığından parça " +#~ "gerilimlerini büyük ölçüde azaltır. Bu, dış duvar kalitesini korurken " +#~ "parçanın bükülmesini de azaltacaktır. Bu özellik, ABS/ASA gibi eğrilmeye " +#~ "yatkın malzemeler ve ayrıca TPU ve İpek PLA gibi elastik filamentler için " +#~ "çok faydalı olabilir. Ayrıca destekler üzerindeki yüzen bölgelerdeki " +#~ "bükülmenin azaltılmasına da yardımcı olabilir.\n" +#~ "\n" +#~ "Bu ayarın en etkili olması için, tüm iç duvarların çıkıntı derecelerine " +#~ "bakılmaksızın tek katmanlar üzerine değişen yönlerde yazdırılması için " +#~ "Ters Eşiği 0'a ayarlamanız önerilir." + +#, no-c-format, no-boost-format +#~ msgid "" +#~ "Number of mm the overhang need to be for the reversal to be considered " +#~ "useful. Can be a % of the perimeter width.\n" +#~ "Value 0 enables reversal on every odd layers regardless." +#~ msgstr "" +#~ "Ters çevirmenin faydalı sayılması için çıkıntının mm sayısı olması " +#~ "gerekir. Çevre genişliğinin %'si olabilir.\n" +#~ "Değer 0 her tek katmanda terslemeyi etkinleştirir." + +#~ msgid "" +#~ "The direction which the wall loops are extruded when looking down from " +#~ "the top.\n" +#~ "\n" +#~ "By default all walls are extruded in counter-clockwise, unless Reverse on " +#~ "odd is enabled. Set this to any option other than Auto will force the " +#~ "wall direction regardless of the Reverse on odd.\n" +#~ "\n" +#~ "This option will be disabled if spiral vase mode is enabled." +#~ msgstr "" +#~ "Yukarıdan aşağıya bakıldığında duvar döngülerinin ekstrüzyona uğradığı " +#~ "yön.\n" +#~ "\n" +#~ "Tek sayıyı ters çevir seçeneği etkinleştirilmedikçe, varsayılan olarak " +#~ "tüm duvarlar saat yönünün tersine ekstrüde edilir. Bunu Otomatik dışında " +#~ "herhangi bir seçeneğe ayarlayın, Ters açıklığa bakılmaksızın duvar yönünü " +#~ "zorlayacaktır.\n" +#~ "\n" +#~ "Spiral vazo modu etkinse bu seçenek devre dışı bırakılacaktır." + +#~ msgid "" +#~ "Final shape contains self--intersection or multiple points with same " +#~ "coordinate." +#~ msgstr "" +#~ "Son şekil, aynı koordinata sahip birden fazla noktanın kendi kendine " +#~ "kesişimini içerir." + +#~ msgid "" +#~ "While printing by Object, the extruder may collide skirt.\n" +#~ "Thus, reset the skirt layer to 1 to avoid that." +#~ msgstr "" +#~ "Nesne ile yazdırma sırasında ekstruder etekle çarpışabilir.\n" +#~ "Bu durumu önlemek için etek katmanını 1'e sıfırlayın." + +#~ msgid "" +#~ "A draft shield is useful to protect an ABS or ASA print from warping and " +#~ "detaching from print bed due to wind draft. It is usually needed only " +#~ "with open frame printers, i.e. without an enclosure.\n" +#~ "\n" +#~ "Options:\n" +#~ "Enabled = skirt is as tall as the highest printed object.\n" +#~ "Limited = skirt is as tall as specified by skirt height.\n" +#~ "\n" +#~ "Note: With the draft shield active, the skirt will be printed at skirt " +#~ "distance from the object. Therefore, if brims are active it may intersect " +#~ "with them. To avoid this, increase the skirt distance value.\n" +#~ msgstr "" +#~ "Rüzgar taslağı nedeniyle ABS veya ASA baskının eğrilmesine ve baskı " +#~ "yatağından ayrılmasına karşı koruma sağlamak için bir rüzgarlık " +#~ "kullanışlıdır. Genellikle yalnızca açık çerçeveli, yani muhafazasız " +#~ "yazıcılarda gereklidir.\n" +#~ "\n" +#~ "Seçenekler:\n" +#~ "Etkin = etek, yazdırılan en yüksek nesne kadar uzundur.\n" +#~ "Sınırlı = etek, etek yüksekliğinin belirttiği kadar uzundur.\n" +#~ "\n" +#~ "Not: Rüzgarlık etkinken etek, nesneden etek mesafesinde yazdırılacaktır. " +#~ "Bu nedenle eğer kenarlar aktifse onlarla kesişebilir. Bunu önlemek için " +#~ "etek mesafesi değerini artırın.\n" + +#~ msgid "Limited" +#~ msgstr "Sınırlı" + +#~ msgid "" +#~ "Adjust this value to prevent short, unclosed walls from being printed, " +#~ "which could increase print time. Higher values remove more and longer " +#~ "walls.\n" +#~ "\n" +#~ "NOTE: Bottom and top surfaces will not be affected by this value to " +#~ "prevent visual gaps on the ouside of the model. Adjust 'One wall " +#~ "threshold' in the Advanced settings below to adjust the sensitivity of " +#~ "what is considered a top-surface. 'One wall threshold' is only visible if " +#~ "this setting is set above the default value of 0.5, or if single-wall top " +#~ "surfaces is enabled." +#~ msgstr "" +#~ "Yazdırma süresini artırabilecek kısa, kapatılmamış duvarların " +#~ "yazdırılmasını önlemek için bu değeri ayarlayın. Daha yüksek değerler " +#~ "daha fazla ve daha uzun duvarları kaldırır.\n" +#~ "\n" +#~ "NOT: Modelin dış kısmında görsel boşluk kalmaması için alt ve üst " +#~ "yüzeyler bu değerden etkilenmeyecektir. Üst yüzey olarak kabul edilen " +#~ "şeyin hassasiyetini ayarlamak için aşağıdaki Gelişmiş ayarlarda 'Tek " +#~ "duvar eşiği'ni ayarlayın. 'Tek duvar eşiği' yalnızca bu ayar varsayılan " +#~ "değer olan 0,5'in üzerine ayarlandığında veya tek duvarlı üst yüzeyler " +#~ "etkinleştirildiğinde görünür." + +#~ msgid "Don't filter out small internal bridges (beta)" +#~ msgstr "Küçük iç köprüleri filtrelemeyin (deneysel)" + +#~ msgid "" +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Enabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Disabled - Disables this option. This is the default behavior and works " +#~ "well in most cases.\n" +#~ "\n" +#~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - Creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." +#~ msgstr "" +#~ "Bu seçenek, aşırı eğimli veya kavisli modellerde üst yüzeylerdeki " +#~ "yastıklamanın azaltılmasına yardımcı olabilir.\n" +#~ "\n" +#~ "Varsayılan olarak küçük iç köprüler filtrelenir ve iç katı dolgu doğrudan " +#~ "seyrek dolgunun üzerine yazdırılır. Bu çoğu durumda işe yarar ve üstün " +#~ "yüzey kalitesinden çok fazla ödün vermeden yazdırmayı hızlandırır.\n" +#~ "\n" +#~ "Bununla birlikte, özellikle çok düşük seyrek dolgu yoğunluğunun " +#~ "kullanıldığı aşırı eğimli veya kavisli modellerde, bu durum " +#~ "desteklenmeyen katı dolgunun kıvrılmasına ve yastıklanmaya neden olmasına " +#~ "neden olabilir.\n" +#~ "\n" +#~ "Bu seçeneğin etkinleştirilmesi, iç köprü katmanını hafif desteklenmeyen " +#~ "dahili katı dolgu üzerine yazdıracaktır. Aşağıdaki seçenekler filtreleme " +#~ "miktarını, yani oluşturulan dahili köprülerin miktarını kontrol eder.\n" +#~ "\n" +#~ "Devre Dışı - Bu seçeneği devre dışı bırakır. Bu varsayılan davranıştır ve " +#~ "çoğu durumda iyi çalışır.\n" +#~ "\n" +#~ "Sınırlı filtreleme - Aşırı eğimli yüzeylerde iç köprüler oluştururken " +#~ "gereksiz iç köprülerin oluşmasını da önler. Bu, çoğu zor modelde işe " +#~ "yarar.\n" +#~ "\n" +#~ "Filtreleme yok - Her potansiyel dahili çıkıntıda dahili köprüler " +#~ "oluşturur. Bu seçenek, aşırı eğimli üst yüzey modelleri için " +#~ "kullanışlıdır. Ancak çoğu durumda çok fazla gereksiz köprü oluşturur." + +#~ msgid "Shrinkage" +#~ msgstr "Büzüşme" + +#~ msgid "" +#~ "Your object appears to be too large. It will be scaled down to fit the " +#~ "heat bed automatically." +#~ msgstr "" +#~ "Nesneniz çok büyük görünüyor. Plakaya otomatik olarak uyacak şekilde " +#~ "küçültülecektir." + +#~ msgid "Shift+G" +#~ msgstr "Shift+G" + +#~ msgid "" +#~ "Enables gap fill for the selected surfaces. The minimum gap length that " +#~ "will be filled can be controlled from the filter out tiny gaps option " +#~ "below.\n" +#~ "\n" +#~ "Options:\n" +#~ "1. Everywhere: Applies gap fill to top, bottom and internal solid " +#~ "surfaces\n" +#~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +#~ "only\n" +#~ "3. Nowhere: Disables gap fill\n" +#~ msgstr "" +#~ "Seçilen yüzeyler için boşluk doldurmayı etkinleştirir. Doldurulacak " +#~ "minimum boşluk uzunluğu aşağıdaki küçük boşlukları filtrele seçeneğinden " +#~ "kontrol edilebilir.\n" +#~ "\n" +#~ "Seçenekler:\n" +#~ "1. Her Yerde: Üst, alt ve iç katı yüzeylere boşluk doldurma uygular\n" +#~ "2. Üst ve Alt yüzeyler: Boşluk doldurmayı yalnızca üst ve alt yüzeylere " +#~ "uygular\n" +#~ "3. Hiçbir Yerde: Boşluk doldurmayı devre dışı bırakır\n" + +#~ msgid "" +#~ "Decrease this value slightly (for example 0.9) to reduce the amount of " +#~ "material for bridge, to improve sag" +#~ msgstr "" +#~ "Köprü için malzeme miktarını azaltmak ve sarkmayı iyileştirmek için bu " +#~ "değeri biraz azaltın (örneğin 0,9)" + +#~ msgid "" +#~ "This value governs the thickness of the internal bridge layer. This is " +#~ "the first layer over sparse infill. Decrease this value slightly (for " +#~ "example 0.9) to improve surface quality over sparse infill." +#~ msgstr "" +#~ "Bu değer iç köprü katmanının kalınlığını belirler. Bu, seyrek dolgunun " +#~ "üzerindeki ilk katmandır. Seyrek dolguya göre yüzey kalitesini " +#~ "iyileştirmek için bu değeri biraz azaltın (örneğin 0,9)." + +#~ msgid "" +#~ "This factor affects the amount of material for top solid infill. You can " +#~ "decrease it slightly to have smooth surface finish" +#~ msgstr "" +#~ "Bu faktör üst katı dolgu için malzeme miktarını etkiler. Pürüzsüz bir " +#~ "yüzey elde etmek için biraz azaltabilirsiniz" + +#~ msgid "This factor affects the amount of material for bottom solid infill" +#~ msgstr "Bu faktör alt katı dolgu için malzeme miktarını etkiler" + +#~ msgid "" +#~ "Enable this option to slow printing down in areas where potential curled " +#~ "perimeters may exist" +#~ msgstr "" +#~ "Potansiyel kıvrılmış çevrelerin bulunabileceği alanlarda yazdırmayı " +#~ "yavaşlatmak için bu seçeneği etkinleştirin" + +#~ msgid "Speed of bridge and completely overhang wall" +#~ msgstr "Köprü hızı ve tamamen sarkan duvar" + +#~ msgid "" +#~ "Speed of internal bridge. If the value is expressed as a percentage, it " +#~ "will be calculated based on the bridge_speed. Default value is 150%." +#~ msgstr "" +#~ "Dahili köprünün hızı. Değer yüzde olarak ifade edilirse köprü_hızına göre " +#~ "hesaplanacaktır. Varsayılan değer %150'dir." + +#~ msgid "Time to load new filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Filamenti değiştirdiğinizde yeni filament yükleme zamanı. Yalnızca " +#~ "istatistikler için" + +#~ msgid "" +#~ "Time to unload old filament when switch filament. For statistics only." +#~ msgstr "" +#~ "Filamenti değiştirdiğinizde eski filamenti boşaltma zamanı. Yalnızca " +#~ "istatistikler için" + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " +#~ "new filament during a tool change (when executing the T code). This time " +#~ "is added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Yazıcı donanım yazılımının (veya Çoklu Malzeme Ünitesi 2.0'ın) takım " +#~ "değişikliği sırasında (T kodu yürütülürken) yeni bir filament yükleme " +#~ "süresi. Bu süre, G kodu zaman tahmincisi tarafından toplam baskı süresine " +#~ "eklenir." + +#~ msgid "" +#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " +#~ "a filament during a tool change (when executing the T code). This time is " +#~ "added to the total print time by the G-code time estimator." +#~ msgstr "" +#~ "Yazıcı ürün yazılımının (veya Çoklu Malzeme Ünitesi 2.0'ın) takım " +#~ "değişimi sırasında (T kodu yürütülürken) filamenti boşaltma süresi. Bu " +#~ "süre, G kodu süre tahmincisi tarafından toplam baskı süresine eklenir." + +#~ msgid "Filter out gaps smaller than the threshold specified" +#~ msgstr "Belirtilen eşikten daha küçük boşlukları filtrele" + +#~ msgid "" +#~ "Enable this option for chamber temperature control. An M191 command will " +#~ "be added before \"machine_start_gcode\"\n" +#~ "G-code commands: M141/M191 S(0-255)" +#~ msgstr "" +#~ "Hazne sıcaklığı kontrolü için bu seçeneği etkinleştirin. Önce bir M191 " +#~ "komutu eklenecek \"machine_start_gcode\"\n" +#~ "G-code komut: M141/M191 S(0-255)" + +#~ msgid "" +#~ "Higher chamber temperature can help suppress or reduce warping and " +#~ "potentially lead to higher interlayer bonding strength for high " +#~ "temperature materials like ABS, ASA, PC, PA and so on. At the same time, " +#~ "the air filtration of ABS and ASA will get worse. While for PLA, PETG, " +#~ "TPU, PVA and other low temperature materials,the actual chamber " +#~ "temperature should not be high to avoid cloggings, so 0 which stands for " +#~ "turning off is highly recommended" +#~ msgstr "" +#~ "Daha yüksek hazne sıcaklığı, eğrilmeyi bastırmaya veya azaltmaya yardımcı " +#~ "olabilir ve ABS, ASA, PC, PA ve benzeri gibi yüksek sıcaklıktaki " +#~ "malzemeler için potansiyel olarak daha yüksek ara katman yapışmasına yol " +#~ "açabilir Aynı zamanda, ABS ve ASA'nın hava filtrasyonu daha da " +#~ "kötüleşecektir. PLA, PETG, TPU, PVA ve diğer düşük sıcaklıktaki " +#~ "malzemeler için, tıkanmaları önlemek için gerçek hazne sıcaklığı yüksek " +#~ "olmamalıdır, bu nedenle kapatma anlamına gelen 0 şiddetle tavsiye edilir" + +#~ msgid "" +#~ "Different nozzle diameters and different filament diameters is not " +#~ "allowed when prime tower is enabled." +#~ msgstr "" +#~ "Ana kule etkinleştirildiğinde farklı nozul çaplarına ve farklı filament " +#~ "çaplarına izin verilmez." + +#~ msgid "" +#~ "Ooze prevention is currently not supported with the prime tower enabled." +#~ msgstr "Sızıntı önleme şu anda ana kule etkinken desteklenmemektedir." + +#~ msgid "" +#~ "Height of initial layer. Making initial layer height to be thick slightly " +#~ "can improve build plate adhension" +#~ msgstr "" +#~ "İlk katmanın yüksekliği. İlk katman yüksekliğini biraz kalın yapmak, " +#~ "baskı plakasının yapışmasını iyileştirebilir" + +#~ msgid "" +#~ "Interlocking depth of a segmented region. Zero disables this feature." +#~ msgstr "" +#~ "Bölümlere ayrılmış bir bölgenin birbirine kenetlenen derinliği. 0 bu " +#~ "özelliği devre dışı bırakır." + +#~ msgid "Wipe tower extruder" +#~ msgstr "Silme kulesi ekstruderi" + #~ msgid "Current association: " #~ msgstr "Mevcut dernek:" @@ -16763,13 +22780,6 @@ msgstr "" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "Lütfen geçerli bir değer girin (K in 0~0.3, N in 0.6~2.0)" -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Bağlı yazıcıları seçin (0/6)" - -#, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Bağlı Yazıcıları Seçin (%d/6)" - #~ msgid "PrintingPause" #~ msgstr "Yazdırma Duraklatıldı" @@ -16784,11 +22794,12 @@ msgstr "" #~ "the print start menu, the printer will follow the old way, calibrate the " #~ "filament before the print; When you start a multi color/material print, " #~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most cases.\n" +#~ "during every filament switch which will have a good result in most " +#~ "cases.\n" #~ "\n" #~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build plate " -#~ "does not have good adhesion (please wash the build plate or apply " +#~ "not reliable: using a texture plate to do the calibration; the build " +#~ "plate does not have good adhesion (please wash the build plate or apply " #~ "gluestick!) ...You can find more from our wiki.\n" #~ "\n" #~ "The calibration results have about 10 percent jitter in our test, which " @@ -16799,11 +22810,12 @@ msgstr "" #~ "bulabilirsiniz.\n" #~ "\n" #~ "Genellikle kalibrasyon gereksizdir. Yazdırma başlat menüsündeki \"akış " -#~ "dinamiği kalibrasyonu\" seçeneği işaretliyken tek renkli/malzeme baskısını " -#~ "başlattığınızda, yazıcı eski yöntemi izleyecek, yazdırmadan önce filamenti " -#~ "kalibre edecektir; Çok renkli/malzeme baskısını başlattığınızda, yazıcı " -#~ "her filament değişiminde filament için varsayılan dengeleme parametresini " -#~ "kullanacaktır ve bu çoğu durumda iyi bir sonuç verecektir.\n" +#~ "dinamiği kalibrasyonu\" seçeneği işaretliyken tek renkli/malzeme " +#~ "baskısını başlattığınızda, yazıcı eski yöntemi izleyecek, yazdırmadan " +#~ "önce filamenti kalibre edecektir; Çok renkli/malzeme baskısını " +#~ "başlattığınızda, yazıcı her filament değişiminde filament için varsayılan " +#~ "dengeleme parametresini kullanacaktır ve bu çoğu durumda iyi bir sonuç " +#~ "verecektir.\n" #~ "\n" #~ "Kalibrasyon sonucunun güvenilir olmamasına yol açacak birkaç durum " #~ "olduğunu lütfen unutmayın: kalibrasyonu yapmak için doku plakası " @@ -16811,37 +22823,30 @@ msgstr "" #~ "yıkayın veya yapıştırıcı uygulayın!) ...Daha fazlasını wiki'mizden " #~ "bulabilirsiniz.\n" #~ "\n" -#~ "Testimizde kalibrasyon sonuçlarında yaklaşık yüzde 10'luk bir titreşim var " -#~ "ve bu da sonucun her kalibrasyonda tam olarak aynı olmamasına neden " +#~ "Testimizde kalibrasyon sonuçlarında yaklaşık yüzde 10'luk bir titreşim " +#~ "var ve bu da sonucun her kalibrasyonda tam olarak aynı olmamasına neden " #~ "olabilir. Yeni güncellemelerle iyileştirmeler yapmak için hâlâ temel " #~ "nedeni araştırıyoruz." #~ msgid "" -#~ "Only one of the results with the same name will be saved. Are you sure you " -#~ "want to overrides the other results?" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overrides the other results?" #~ msgstr "" #~ "Aynı ada sahip sonuçlardan yalnızca biri kaydedilecektir. Diğer sonuçları " #~ "geçersiz kılmak istediğinizden emin misiniz?" -#, c-format, boost-format #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you want " -#~ "to overrides the historical result?" +#~ "Only one of the results with the same name is saved. Are you sure you " +#~ "want to overrides the historical result?" #~ msgstr "" -#~ "Aynı ada sahip geçmiş bir kalibrasyon sonucu zaten var: %s. Aynı ada sahip " -#~ "sonuçlardan yalnızca biri kaydedilir. Geçmiş sonucu geçersiz kılmak " +#~ "Aynı ada sahip geçmiş bir kalibrasyon sonucu zaten var: %s. Aynı ada " +#~ "sahip sonuçlardan yalnızca biri kaydedilir. Geçmiş sonucu geçersiz kılmak " #~ "istediğinizden emin misiniz?" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "Lütfen mükemmel ekstrüzyon derecesine sahip köşeyi bulun" -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - #~ msgid "" #~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " #~ "PrusaSlicer links from Printable.com" @@ -16853,11 +22858,11 @@ msgstr "" #~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " #~ "first, which works best in most cases.\n" #~ "\n" -#~ "Printing walls first may help with extreme overhangs as the walls have the " -#~ "neighbouring infill to adhere to. However, the infill will slighly push " -#~ "out the printed walls where it is attached to them, resulting in a worse " -#~ "external surface finish. It can also cause the infill to shine through the " -#~ "external surfaces of the part." +#~ "Printing walls first may help with extreme overhangs as the walls have " +#~ "the neighbouring infill to adhere to. However, the infill will slightly " +#~ "push out the printed walls where it is attached to them, resulting in a " +#~ "worse external surface finish. It can also cause the infill to shine " +#~ "through the external surfaces of the part." #~ msgstr "" #~ "Duvar/dolgu sırası. Onay kutusunun işareti kaldırıldığında ilk olarak " #~ "duvarlar yazdırılır ve bu çoğu durumda en iyi sonucu verir.\n" @@ -16868,13 +22873,10 @@ msgstr "" #~ "kötü bir dış yüzey kalitesine neden olacaktır. Ayrıca dolgunun parçanın " #~ "dış yüzeylerinden parlamasına da neden olabilir." -#~ msgid "V" -#~ msgstr "V" - #~ msgid "" -#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from PrusaSlicer " -#~ "by Prusa Research. PrusaSlicer is from Slic3r by Alessandro Ranellucci " -#~ "and the RepRap community" +#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " +#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " +#~ "Ranellucci and the RepRap community" #~ msgstr "" #~ "Snapmaker Orca, Prusa Research'ün PrusaSlicer'ından Bambulab'ın " #~ "BambuStudio'sunu temel alıyor. PrusaSlicer, Alessandro Ranellucci ve " @@ -16945,15 +22947,16 @@ msgstr "" #~ "değer) korumak ister misiniz?" #~ msgid "" -#~ "You have previously modified your settings and are about to overwrite them " -#~ "with new ones." +#~ "You have previously modified your settings and are about to overwrite " +#~ "them with new ones." #~ msgstr "" -#~ "Ayarlarınızı daha önce değiştirdiniz ve bunların üzerine yenilerini yazmak " -#~ "üzeresiniz." +#~ "Ayarlarınızı daha önce değiştirdiniz ve bunların üzerine yenilerini " +#~ "yazmak üzeresiniz." #~ msgid "" #~ "\n" -#~ "Do you want to keep your current modified settings, or use preset settings?" +#~ "Do you want to keep your current modified settings, or use preset " +#~ "settings?" #~ msgstr "" #~ "\n" #~ "Geçerli değiştirilen ayarlarınızı korumak mı yoksa önceden ayarlanmış " @@ -16969,37 +22972,9 @@ msgstr "" #~ msgid "Unload Filament" #~ msgstr "Filamenti Çıkarın" -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Filamenti otomatik olarak yüklemek veya çıkarmak için bir AMS yuvası seçin " -#~ "ve ardından \"Yükle\" veya \"Boşalt\" düğmesine basın." - -#~ msgid "MC" -#~ msgstr "MC" - #~ msgid "MainBoard" #~ msgstr "Anakart" -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "- ℃" -#~ msgstr "- °C" - -#~ msgid "0.5" -#~ msgstr "0.5" - -#~ msgid "0.005" -#~ msgstr "0.005" - #~ msgid "New Flow Dynamics Calibration" #~ msgstr "Yeni Akış Dinamiği Kalibrasyonu" @@ -17010,25 +22985,6 @@ msgstr "" #~ "4’ten fazla stüdyo/kullanışlı uzaktan erişim kullanıyor, bazılarını " #~ "kapatıp tekrar deneyebilirsiniz." -#~ msgid "" -#~ "The 3mf file version is in Beta and it is newer than the current Bambu " -#~ "Studio version." -#~ msgstr "" -#~ "3mf dosya sürümü Beta aşamasındadır ve mevcut Bambu Studio sürümünden daha " -#~ "yenidir." - -#~ msgid "If you would like to try Bambu Studio Beta, you may click to" -#~ msgstr "Bambu Studio Beta’yı denemek isterseniz tıklayabilirsiniz." - -#~ msgid "The 3mf file version is newer than the current Bambu Studio version." -#~ msgstr "3mf dosya sürümü mevcut Bambu Studio sürümünden daha yenidir." - -#~ msgid "" -#~ "Update your Bambu Studio could enable all functionality in the 3mf file." -#~ msgstr "" -#~ "Bambu Studio’nuzu güncellemek, 3mf dosyasındaki tüm işlevleri " -#~ "etkinleştirebilir." - #~ msgid "active" #~ msgstr "aktif" @@ -17042,9 +22998,9 @@ msgstr "" #~ "Green means that AMS humidity is normal, orange represent humidity is " #~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" #~ msgstr "" -#~ "Yeşil, AMS neminin normal olduğunu, turuncu nemin yüksek olduğunu, kırmızı " -#~ "ise nemin çok yüksek olduğunu gösterir.(Higrometre: ne kadar düşükse o " -#~ "kadar iyidir.)" +#~ "Yeşil, AMS neminin normal olduğunu, turuncu nemin yüksek olduğunu, " +#~ "kırmızı ise nemin çok yüksek olduğunu gösterir.(Higrometre: ne kadar " +#~ "düşükse o kadar iyidir.)" #~ msgid "Desiccant status" #~ msgstr "Kurutucu durumu" @@ -17054,27 +23010,26 @@ msgstr "" #~ "inactive. Please change the desiccant.(The bars: higher the better.)" #~ msgstr "" #~ "İki çubuktan daha düşük bir kurutucu durumu, kurutucunun etkin olmadığını " -#~ "gösterir. Lütfen kurutucuyu değiştirin.(Çubuklar: ne kadar yüksek olursa o " -#~ "kadar iyidir.)" +#~ "gösterir. Lütfen kurutucuyu değiştirin.(Çubuklar: ne kadar yüksek olursa " +#~ "o kadar iyidir.)" #~ msgid "" #~ "Note: When the lid is open or the desiccant pack is changed, it can take " #~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the chamber " -#~ "accurately." +#~ "the process. During this time, the indicator may not represent the " +#~ "chamber accurately." #~ msgstr "" #~ "Not: Kapak açıkken veya kurutucu paketi değiştirildiğinde, nemin emilmesi " #~ "saatler veya bir gece sürebilir. Düşük sıcaklıklar da süreci yavaşlatır. " #~ "Bu süre zarfında gösterge hazneyi doğru şekilde temsil etmeyebilir." #~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " +#~ "Note: if new filament is inserted during printing, the AMS will not " #~ "automatically read any information until printing is completed." #~ msgstr "" #~ "Not: Yazdırma sırasında yeni filament takılırsa AMS, yazdırma tamamlanana " #~ "kadar herhangi bir bilgiyi otomatik olarak okumayacaktır." -#, boost-format #~ msgid "Succeed to export G-code to %1%" #~ msgstr "G kodunu %1%'e aktarmayı başardınız" @@ -17084,8 +23039,7 @@ msgstr "" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "Başlatma başarısız oldu (Kamera Cihazı Yok)!" -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." +#~ msgid "Printer is busy downloading, please wait for the download to finish." #~ msgstr "" #~ "Yazıcı indirme işlemiyle meşgul. Lütfen indirme işleminin bitmesini " #~ "bekleyin." @@ -17099,37 +23053,29 @@ msgstr "" #~ msgid "Initialize failed (Missing LAN ip of printer)!" #~ msgstr "Başlatma başarısız oldu (Yazıcının LAN ip'si eksik)!" -#, c-format, boost-format #~ msgid "Stopped [%d]!" #~ msgstr "[%d] durduruldu!" -#, c-format, boost-format #~ msgid "Load failed [%d]!" #~ msgstr "Yükleme başarısız [%d]!" -#, c-format, boost-format #~ msgid "No files [%d]" #~ msgstr "Dosya yok [%d]" -#, c-format, boost-format #~ msgid "Load failed [%d]" #~ msgstr "Yükleme başarısız [%d]" -#~ msgid "Failed to fetching model infomations from printer." +#~ msgid "Failed to fetching model informations from printer." #~ msgstr "Model bilgileri yazıcıdan alınamadı." -#~ msgid "Failed to parse model infomations." -#~ msgstr "Model bilgileri ayrıştırılamadı." - #~ msgid "Connection lost. Please retry." #~ msgstr "Bağlantı koptu. Lütfen tekrar deneyiniz." #~ msgid "File not exists." #~ msgstr "Dosya mevcut değil." -#, boost-format #~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" +#~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -17138,7 +23084,7 @@ msgstr "" #~ "korumak ister misiniz?" #~ msgid "" -#~ "You have changed some preset settings. \n" +#~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching " #~ "preset?" #~ msgstr "" @@ -17152,14 +23098,14 @@ msgstr "" #~ msgid "" #~ "Please go to filament setting to edit your presets if you need.\n" #~ "Please note that nozzle temperature, hot bed temperature, and maximum " -#~ "volumetric speed have a significant impact on printing quality. Please set " -#~ "them carefully." +#~ "volumetric speed have a significant impact on printing quality. Please " +#~ "set them carefully." #~ msgstr "" -#~ "İhtiyacınız olursa ön ayarlarınızı düzenlemek için lütfen filament ayarına " -#~ "gidin.\n" +#~ "İhtiyacınız olursa ön ayarlarınızı düzenlemek için lütfen filament " +#~ "ayarına gidin.\n" #~ "Lütfen püskürtme ucu sıcaklığının, sıcak yatak sıcaklığının ve maksimum " -#~ "hacimsel hızın yazdırma kalitesi üzerinde önemli bir etkiye sahip olduğunu " -#~ "unutmayın. Lütfen bunları dikkatlice ayarlayın." +#~ "hacimsel hızın yazdırma kalitesi üzerinde önemli bir etkiye sahip " +#~ "olduğunu unutmayın. Lütfen bunları dikkatlice ayarlayın." #~ msgid "Studio Version:" #~ msgstr "Stüdyo Sürümü:" @@ -17204,8 +23150,8 @@ msgstr "" #~ msgstr "Depolama Yüklemesini Test Etme" #~ msgid "" -#~ "The speed setting exceeds the printer's maximum speed (machine_max_speed_x/" -#~ "machine_max_speed_y).\n" +#~ "The speed setting exceeds the printer's maximum speed " +#~ "(machine_max_speed_x/machine_max_speed_y).\n" #~ "Orca will automatically cap the print speed to ensure it doesn't surpass " #~ "the printer's capabilities.\n" #~ "You can adjust the maximum speed setting in your printer's configuration " @@ -17213,8 +23159,8 @@ msgstr "" #~ msgstr "" #~ "Hız ayarı yazıcının maksimum hızını aşıyor (machine_max_speed_x/" #~ "machine_max_speed_y).\n" -#~ "Orca, yazıcının yeteneklerini aşmadığından emin olmak için yazdırma hızını " -#~ "otomatik olarak sınırlayacaktır.\n" +#~ "Orca, yazıcının yeteneklerini aşmadığından emin olmak için yazdırma " +#~ "hızını otomatik olarak sınırlayacaktır.\n" #~ "Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasındaki " #~ "maksimum hız ayarını yapabilirsiniz." @@ -17226,10 +23172,10 @@ msgstr "" #~ "bırakılmasıyla çalışır. " #~ msgid "" -#~ "Change these settings automatically? \n" +#~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra " #~ "wall\n" -#~ "No - Dont use alternate extra wall" +#~ "No - Don't use alternate extra wall" #~ msgstr "" #~ "Bu ayarlar otomatik olarak değiştirilsin mi?\n" #~ "Evet - Dikey kabuk kalınlığını sağlamayı devre dışı bırakın ve alternatif " @@ -17240,8 +23186,8 @@ msgstr "" #~ "Add solid infill near sloping surfaces to guarantee the vertical shell " #~ "thickness (top+bottom solid layers)" #~ msgstr "" -#~ "Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına katı " -#~ "dolgu ekleyin (üst + alt katı katmanlar)" +#~ "Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına " +#~ "katı dolgu ekleyin (üst + alt katı katmanlar)" #~ msgid "Further reduce solid infill on walls (beta)" #~ msgstr "Duvarlardaki katı dolguyu daha da azaltın (deneysel)" @@ -17261,9 +23207,6 @@ msgstr "" #~ "Çok eğimli yüzeyler için bu seçenek çok ince bir üst katman " #~ "oluşturacağından ve devre dışı bırakılması gerektiğinden uygun değildir." -#~ msgid " " -#~ msgstr " " - #~ msgid "Text-Rotate" #~ msgstr "Metin Döndürme" @@ -17279,13 +23222,6 @@ msgstr "" #~ msgid "Configuration package updated to " #~ msgstr "Yapılandırma paketi şu şekilde güncellendi: " -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "" -#~ "Dış duvar aralığını ayarlayarak kabuk hassasiyetini artırın. Bu aynı " -#~ "zamanda katman tutarlılığını da artırır." - #~ msgid "Enable Flow Compensation" #~ msgstr "Akış telafisi'ni etkinleştir" @@ -17295,44 +23231,12 @@ msgstr "" #~ "are not specified explicitly." #~ msgstr "" #~ "Daha iyi katman soğutması için yavaşlama etkinleştirildiğinde, yazdırma " -#~ "çıkıntıları olduğunda ve özellik hızları açıkça belirtilmediğinde filament " -#~ "için minimum yazdırma hızı." +#~ "çıkıntıları olduğunda ve özellik hızları açıkça belirtilmediğinde " +#~ "filament için minimum yazdırma hızı." -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "Seyrek katman yok (DENEYSEL)" - -#~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" -#~ msgstr "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" - -#~ msgid "The Config can not be loaded." +#~ msgid "The Config cannot be loaded." #~ msgstr "Yapılandırma yüklenemiyor." -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "3mf, eski Snapmaker Orca tarafından oluşturulmuştur, yalnızca geometri " -#~ "verilerini yükleyin." - -#~ msgid "wiki" -#~ msgstr "wiki" - -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option.Some " -#~ "extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "\"label_objects\" seçeneği kullanılırken göreceli ekstrüzyon önerilir. " -#~ "Bazı ekstruderler bu seçeneğin işareti kaldırıldığında (mutlak ekstrüzyon " -#~ "modu) daha iyi çalışır. Temizleme kulesi yalnızca göreceli modla " -#~ "uyumludur. BambuLab yazıcılarında her zaman etkindir. Varsayılan olarak " -#~ "işaretlendi" - #~ msgid "Movement:" #~ msgstr "Hareket:" @@ -17361,7 +23265,7 @@ msgstr "" #~ msgstr "konektörler nesnenin dışında" #~ msgid "" -#~ "Invalid state. \n" +#~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" #~ "Geçersiz durum.\n" @@ -17371,7 +23275,7 @@ msgstr "" #~ msgstr "Yeniden hesapla" #~ msgid "" -#~ "Orca recalculates your flushing volumes everytime the filament colors " +#~ "Orca recalculates your flushing volumes every time the filament colors " #~ "change. You can change this behavior in Preferences." #~ msgstr "" #~ "Orca, filament renkleri her değiştiğinde yıkama hacimlerinizi yeniden " @@ -17385,7 +23289,7 @@ msgstr "" #~ "bağlantısının düzgün çalışıp çalışmadığını kontrol edin ve baskıyı tekrar " #~ "gönderin." -#~ msgid "The beginning of the vendor can not be a number. Please re-enter." +#~ msgid "The beginning of the vendor cannot be a number. Please re-enter." #~ msgstr "Satıcının başlangıcı sayı olamaz. Lütfen tekrar girin." #~ msgid "Edit Text" @@ -17400,9 +23304,6 @@ msgstr "" #~ msgid "Choose SLA archive:" #~ msgstr "SLA arşivini seçin:" -#~ msgid "Import file" -#~ msgstr "Dosyayı içe aktar" - #~ msgid "Import model and profile" #~ msgstr "Modeli ve profili içe aktar" @@ -17453,13 +23354,12 @@ msgstr "" #~ "Bir Parçayı Çıkar\n" #~ "Negatif parça değiştiriciyi kullanarak bir ağı diğerinden " #~ "çıkarabileceğinizi biliyor muydunuz? Bu şekilde örneğin doğrudan Orca " -#~ "Slicer'da kolayca yeniden boyutlandırılabilen delikler oluşturabilirsiniz. " -#~ "Daha fazlasını belgelerde okuyun." +#~ "Slicer'da kolayca yeniden boyutlandırılabilen delikler " +#~ "oluşturabilirsiniz. Daha fazlasını belgelerde okuyun." #~ msgid "Filling bed " #~ msgstr "Yatak doldurma " -#, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." #~ msgstr "%1% dolgu deseni 100%% yoğunluğu desteklemiyor." @@ -17470,16 +23370,17 @@ msgstr "" #~ msgstr "" #~ "Doğrusal desene geçilsin mi?\n" #~ "Evet - otomatik olarak doğrusal desene geçin\n" -#~ "Hayır - yoğunluğu otomatik olarak %100 olmayan varsayılan değere sıfırlayın" +#~ "Hayır - yoğunluğu otomatik olarak %100 olmayan varsayılan değere " +#~ "sıfırlayın" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." +#~ msgid "Please heat the nozzle to above 170°C before loading filament." #~ msgstr "" #~ "Filamenti yüklemeden önce lütfen Nozulu 170 derecenin üzerine ısıtın." -#~ msgid "Show g-code window" +#~ msgid "Show G-code window" #~ msgstr "G kodu penceresini göster" -#~ msgid "If enabled, g-code window will be displayed." +#~ msgid "If enabled, G-code window will be displayed." #~ msgstr "Etkinleştirilirse g kodu penceresi görüntülenecektir." #, c-format @@ -17492,7 +23393,6 @@ msgstr "" #~ msgid "This setting specify the count of walls around tree support" #~ msgstr "Bu ayar, ağaç desteğinin etrafındaki duvarların sayısını belirtir" -#, c-format, boost-format #~ msgid " doesn't work at 100%% density " #~ msgstr " 100%% yoğunlukta çalışmıyor " @@ -17517,7 +23417,7 @@ msgstr "" #~ msgid "Export all objects as STL" #~ msgstr "Tüm nesneleri STL olarak dışa aktar" -#~ msgid "The 3mf is not compatible, load geometry data only!" +#~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "3mf uyumlu değil, yalnızca geometri verilerini yükleyin!" #~ msgid "Incompatible 3mf" @@ -17533,7 +23433,6 @@ msgstr "" #~ "Nesneye göre yazdırıldığında, I3 yapısına sahip makineler zaman atlamalı " #~ "videolar oluşturmayacaktır." -#, c-format, boost-format #~ msgid "%s is not supported by AMS." #~ msgstr "%s AMS tarafından desteklenmiyor." @@ -17573,165 +23472,13 @@ msgstr "" #~ msgid "inner-outer-inner/infill" #~ msgstr "iç-dış-iç/dolgu" -#, c-format, boost-format #~ msgid "%%" #~ msgstr "%%" -#~ msgid "Export 3MF" -#~ msgstr "3MF'yi dışa aktar" - -#~ msgid "Export project as 3MF." -#~ msgstr "Projeyi 3MF olarak dışa aktarın." - -#~ msgid "Export slicing data" -#~ msgstr "Dilimleme verilerini dışa aktar" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Dilimleme verilerini bir klasöre aktarın." - -#~ msgid "Load slicing data" -#~ msgstr "Dilimleme verilerini yükle" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Önbelleğe alınmış dilimleme verilerini dizinden yükle" - -#~ msgid "Export STL" -#~ msgstr "STL'yi dışa aktar" - #~ msgid "Export the objects as multiple STL." #~ msgstr "Nesneleri birden çok STL olarak dışa aktarın." -#~ msgid "Slice" -#~ msgstr "Dilimle" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Plakaları dilimleyin: 0-tüm plakalar, i-plaka i, diğerleri-geçersiz" - -#~ msgid "Show command help." -#~ msgstr "Komut yardımını göster." - -#~ msgid "UpToDate" -#~ msgstr "Güncel" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "3mf'nin yapılandırma değerlerini en son sürüme güncelleyin." - -#~ msgid "Load default filaments" -#~ msgstr "Varsayılan filamentleri yükle" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "Yüklenmeyenler için ilk filamenti varsayılan olarak yükleyin" - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "dilimleme için plaka başına maksimum üçgen sayısı." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "saniye cinsinden plaka başına maksimum dilimleme süresi." - -#~ msgid "Normative check" -#~ msgstr "Normatif kontrol" - -#~ msgid "Check the normative items." -#~ msgstr "Normatif maddeleri kontrol edin." - -#~ msgid "Output Model Info" -#~ msgstr "Çıktı Model Bilgileri" - -#~ msgid "Output the model's information." -#~ msgstr "Modelin bilgilerini çıktıla." - -#~ msgid "Export Settings" -#~ msgstr "Dışa Aktarma Ayarları" - -#~ msgid "Export settings to a file." -#~ msgstr "Ayarları bir dosyaya aktarın." - -#~ msgid "Send progress to pipe" -#~ msgstr "İlerlemeyi kanala gönder" - -#~ msgid "Send progress to pipe." -#~ msgstr "İlerlemeyi boruya gönder." - -#~ msgid "Arrange Options" -#~ msgstr "Hizalama Seçenekleri" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "" -#~ "Hizalama seçenekleri: 0-devre dışı bırak, 1-etkinleştir, diğer-otomatik" - -#~ msgid "Repetions count" -#~ msgstr "Tekrar sayısı" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "Tüm modelin tekrar sayısı" - -#~ msgid "Convert Unit" -#~ msgstr "Birimi Dönüştür" - -#~ msgid "Convert the units of model" -#~ msgstr "Modelin birimlerini dönüştür" - -#~ msgid "Rotate around X" -#~ msgstr "X etrafında döndür" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "X ekseni etrafında derece cinsinden dönüş açısı." - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Modeli kayan nokta faktörüne göre ölçeklendirin" - -#~ msgid "Load General Settings" -#~ msgstr "Genel Ayarları Yükle" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Belirtilen dosyadan proses/yazıcıayarlarını yükleyin" - -#~ msgid "Load Filament Settings" -#~ msgstr "Filament Ayarlarını Yükle" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Filament ayarlarını belirtilen dosya listesinden yükleyin" - -#~ msgid "Skip Objects" -#~ msgstr "Nesneleri Atla" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Bu baskıdaki bazı nesneleri atla" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "güncellemeyi kullanırken güncelleme işlemi/yazıcıayarlarını yükle" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "" -#~ "güncellemeyi kullanırken belirtilen dosyadan güncel işlem/yazıcıayarlarını " -#~ "yükle" - -#~ msgid "Output directory" -#~ msgstr "Çıkış dizini" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Dışa aktarılan dosyalar için çıkış dizini." - -#~ msgid "Debug level" -#~ msgstr "Hata ayıklama düzeyi" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "Hata ayıklama günlüğü düzeyini ayarlar. 0:önemli, 1:hata, 2:uyarı, 3:" -#~ "bilgi, 4:hata ayıklama, 5:izleme\n" - -#, boost-format -#~ msgid "The selected preset: %1% is not found." +#~ msgid "The selected preset: %1% was not found." #~ msgstr "Seçilen ön ayar: %1% bulunamadı." #~ msgid "" @@ -17743,24 +23490,15 @@ msgstr "" #~ "3D sahnede fare ve dokunmatik panel ile görünümü ve nesne/parça seçimini " #~ "nasıl kontrol edeceğinizi biliyor muydunuz?" -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "Modeli Düzelt\n" -#~ "Pek çok dilimleme sorununu önlemek için bozuk bir 3D modeli " -#~ "düzeltebileceğinizi biliyor muydunuz?" - -#~ msgid "Embeded" +#~ msgid "Embedded" #~ msgstr "Gömülü" #~ msgid "" #~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "parsed. Please delete the file and try again." #~ msgstr "" -#~ "Snapmaker Orca yapılandırma dosyası bozulmuş olabilir ve ayrıştırılması mümkün " -#~ "olmayabilir. Lütfen dosyayı silin ve tekrar deneyin." +#~ "Snapmaker Orca yapılandırma dosyası bozulmuş olabilir ve ayrıştırılması " +#~ "mümkün olmayabilir. Lütfen dosyayı silin ve tekrar deneyin." #~ msgid "Online Models" #~ msgstr "Çevrimiçi Modeller" @@ -17773,9 +23511,9 @@ msgstr "" #~ msgid "" #~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" -#~ "(Currently supporting automatic supply of consumables with the same brand, " -#~ "material type, and color)" +#~ "automatic replenishment is currently not possible.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" #~ msgstr "" #~ "Şu anda aynı yedek sarf malzemesi mevcut değildir ve otomatik yenileme şu " #~ "anda mümkün değildir.\n" @@ -17807,7 +23545,8 @@ msgstr "" #~ "daha sıcak olamaz" #~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "Makinede yardımcı parça soğutma fanı varsa bu seçeneği etkinleştirin" +#~ msgstr "" +#~ "Makinede yardımcı parça soğutma fanı varsa bu seçeneği etkinleştirin" #~ msgid "" #~ "This option is enabled if machine support controlling chamber temperature" @@ -17835,7 +23574,8 @@ msgstr "" #~ "katmanları etkilemez" #~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "Alt kısımdaki boş katmanların yerini en yakın normal katmanlar alır." +#~ msgstr "" +#~ "Alt kısımdaki boş katmanların yerini en yakın normal katmanlar alır." #~ msgid "The model has too many empty layers." #~ msgstr "Modelde çok fazla boş katman var." @@ -17843,23 +23583,16 @@ msgstr "" #~ msgid "Total Time Estimation" #~ msgstr "Toplam Süre Tahmini" -#~ msgid "The 3mf is not from Bambu Lab, load geometry data only." -#~ msgstr "3mf, Bambu Lab'den değildir, yalnızca geometri verilerini yükleyin." - #~ msgid "High Temp Plate" #~ msgstr "Tabla" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Bed temperature when high temperature plate is installed. A value of 0 " +#~ "means the filament does not support printing on the High Temp Plate" #~ msgstr "" -#~ "Yüksek sıcaklık plakası takıldığında yatak sıcaklığı. 0 değeri, filamentin " -#~ "Yüksek Sıcaklık Plakasına yazdırmayı desteklemediği anlamına gelir" - -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "" -#~ "Klipper max_accel_to_decel değeri bu hızlanma % değerine ayarlanacaktır" +#~ "Yüksek sıcaklık plakası takıldığında yatak sıcaklığı. 0 değeri, " +#~ "filamentin Yüksek Sıcaklık Plakasına yazdırmayı desteklemediği anlamına " +#~ "gelir" #~ msgid "Maximum acceleration for travel (M204 T)" #~ msgstr "Hareket için maksimum hızlanma (M204 T)" @@ -17874,7 +23607,8 @@ msgstr "" #~ msgstr "" #~ "Desteğin stili ve şekli. Normal destek için, desteklerin düzenli bir " #~ "ızgaraya yansıtılması daha sağlam destekler oluşturur (varsayılan), rahat " -#~ "destek kuleleri ise malzemeden tasarruf sağlar ve nesne izlerini azaltır.\n" +#~ "destek kuleleri ise malzemeden tasarruf sağlar ve nesne izlerini " +#~ "azaltır.\n" #~ "Ağaç desteği için, ince stil, dalları daha agresif bir şekilde " #~ "birleştirecek ve çok fazla malzeme tasarrufu sağlayacak (varsayılan), " #~ "hibrit stil ise büyük düz çıkıntılar altında normal desteğe benzer yapı " @@ -17893,7 +23627,7 @@ msgstr "" #~ "Please input valid values:\n" #~ "Start temp: <= 350\n" #~ "End temp: >= 180\n" -#~ "Start temp > End temp + 5)" +#~ "Start temp > End temp + 5" #~ msgstr "" #~ "Lütfen geçerli değerleri girin:\n" #~ "Başlangıç sıcaklığı: <= 350\n" @@ -17903,7 +23637,7 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Lütfen geçerli değerleri girin:\n" #~ "başlangıç > 0 adım >= 0\n" @@ -17912,8 +23646,8 @@ msgstr "" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "end > start + step" #~ msgstr "" #~ "Lütfen geçerli değerleri girin:\n" #~ "başlangıç > 10 adım >= 0\n" -#~ "bitiş > başlangıç + adım)" +#~ "bitiş > başlangıç + adım)" \ No newline at end of file diff --git a/localization/i18n/uk/Snapmaker_Orca_uk.po b/localization/i18n/uk/Snapmaker_Orca_uk.po index 2c564eb84a..a5fb2a2636 100644 --- a/localization/i18n/uk/Snapmaker_Orca_uk.po +++ b/localization/i18n/uk/Snapmaker_Orca_uk.po @@ -1,40 +1,147 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR , YEAR. -# EDITOR , YEAR. -# msgid "" msgstr "" -"Project-Id-Version: \n" +"Project-Id-Version: Snapmaker Orcaua\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2024-06-30 23:05+0300\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-03-07 09:30+0200\n" "Last-Translator: \n" -"Language-Team: \n" +"Language-Team: Ukrainian\n" "Language: uk_UA\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" -"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" -"X-Generator: Poedit 3.4.4\n" +"Plural-Forms: nplurals=4; plural=((n%10==1 && n%100!=11) ? 0 : ((n%10 >= 2 " +"&& n%10 <=4 && (n%100 < 12 || n%100 > 14)) ? 1 : ((n%10 == 0 || (n%10 >= 5 " +"&& n%10 <=9)) || (n%100 >= 11 && n%100 <= 14)) ? 2 : 3));\n" +"X-Crowdin-Project: Snapmaker Orcaua\n" +"X-Crowdin-Project-ID: 748805\n" +"X-Crowdin-Language: uk\n" +"X-Crowdin-File: Snapmaker Orca.pot\n" +"X-Crowdin-File-ID: 13\n" +"X-Generator: Poedit 3.5\n" -msgid "Supports Painting" -msgstr "Малювання підтримки" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + коліщатко миші" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU не підтримується AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"Вологий PVA стає гнучким і може застрягти всередині AMS, будь ласка, " +"обережно висушіть його перед використанням." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Філаменти CF/GF є жорсткими і крихкими, їх легко можна зламати або вони " +"можуть застряти в AMS, будьте обережні під час використання." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Поточна вологість AMS" + +msgid "Humidity" +msgstr "" + +msgid "Temperature" +msgstr "Температура" + +msgid "Left Time" +msgstr "" + +msgid "Drying" +msgstr "" + +msgid "Idle" +msgstr "Холостий хід" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Серійний номер:" + +msgid "Version:" +msgstr "Версія:" + +msgid "Latest version" +msgstr "Остання версія" + +msgid "Support Painting" +msgstr "Малювання Підтримок" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Колісок миші" msgid "Section view" -msgstr "Вигляд у розрізі" +msgstr "Вид у розрізі" msgid "Reset direction" msgstr "Скинути напрямок" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + коліщатко миші" - msgid "Pen size" msgstr "Розмір пера" @@ -42,46 +149,43 @@ msgid "Left mouse button" msgstr "Ліва кнопка миші" msgid "Enforce supports" -msgstr "Примусова підтримка" +msgstr "Примусові підтримки" msgid "Right mouse button" msgstr "Права кнопка миші" msgid "Block supports" -msgstr "Блокування підтримки" - -msgid "Shift + Left mouse button" -msgstr "Shift + Ліва кнопка миші" +msgstr "Блокувати підтримки" msgid "Erase" -msgstr "Гумка" +msgstr "Стерти" msgid "Erase all painting" msgstr "Стерти всі малюнки" msgid "Highlight overhang areas" -msgstr "Виділяти виступаючі області" +msgstr "Підсвічувати області нависань" msgid "Gap fill" -msgstr "Заповнення пропусків" +msgstr "Заповнення прогалин" msgid "Perform" msgstr "Виконати" msgid "Gap area" -msgstr "Площа зазору" +msgstr "Площа прогалини" msgid "Tool type" msgstr "Тип інструменту" msgid "Smart fill angle" -msgstr "Розумний кут заповнення" +msgstr "Кут розумного заповнення" msgid "On overhangs only" -msgstr "Лише на звисах" +msgstr "Тільки на нависаннях" msgid "Auto support threshold angle: " -msgstr "Пороговий кут автоматичної підтримки: " +msgstr "Поріг кута автоматичної підтримки: " msgid "Circle" msgstr "Коло" @@ -90,33 +194,33 @@ msgid "Sphere" msgstr "Сфера" msgid "Fill" -msgstr "Заповнити" +msgstr "Заповнення" msgid "Gap Fill" -msgstr "Заповнення пропусків" +msgstr "Заповнення прогалин" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Малювання лише на вибраних гранях: \"%1%\"" msgid "Highlight faces according to overhang angle." -msgstr "Виділити межі з відповідним кутом виступу." +msgstr "Підсвічувати грані відповідно до кута нависання." msgid "No auto support" -msgstr "Немає автоматичної підтримки" +msgstr "Без автоматичної підтримки" msgid "Support Generated" -msgstr "Генерація підтримки" +msgstr "Згенеровані підтримки" msgid "Gizmo-Place on Face" -msgstr "Gizmo \"Поверхнею на стіл\"" +msgstr "Gizmo - Покласти на грань" msgid "Lay on face" msgstr "Покласти на грань" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "Кількість філаменту перевищує максимальну кількість, яку підтримує " @@ -124,7 +228,7 @@ msgstr "" "малювання." msgid "Color Painting" -msgstr "Кольорове малювання" +msgstr "Розфарбовування кольорами" msgid "Pen shape" msgstr "Форма пера" @@ -136,22 +240,22 @@ msgid "Key 1~9" msgstr "Клавіша 1~9" msgid "Choose filament" -msgstr "Вибір філаменту" +msgstr "Вибрати філамент" msgid "Edge detection" -msgstr "Виявлення кордонів" +msgstr "Виявлення границь" msgid "Triangles" msgstr "Трикутники" msgid "Filaments" -msgstr "Філамент" +msgstr "Філаменти" msgid "Brush" msgstr "Пензель" msgid "Smart fill" -msgstr "Інтелектуальне заповнення" +msgstr "Розумне заповнення" msgid "Bucket fill" msgstr "Заливка" @@ -159,11 +263,20 @@ msgstr "Заливка" msgid "Height range" msgstr "Діапазон висот" -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" +msgid "Enter" +msgstr "" msgid "Toggle Wireframe" -msgstr "Переключення каркасу" +msgstr "Перемикання каркасу" + +msgid "Remap filaments" +msgstr "" + +msgid "Remap" +msgstr "" + +msgid "Cancel" +msgstr "Скасувати" msgid "Shortcut Key " msgstr "Комбінація клавіш " @@ -187,9 +300,33 @@ msgstr "Видалити зафарбований колір" msgid "Painted using: Filament %1%" msgstr "Забарвлений за допомогою: Філамент %1%" +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "" + +msgid "Brush size" +msgstr "Розмір пера" + +msgid "Brush shape" +msgstr "Форма пера" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "Перемістити" +msgid "Please select at least one object." +msgstr "Будь ласка, виберіть принаймні один об’єкт." + msgid "Gizmo-Move" msgstr "Gizmo переміщення" @@ -215,19 +352,25 @@ msgid "Error: Please close all toolbar menus first" msgstr "Помилка: будь ласка, спочатку закрийте все меню панелі інструментів" msgid "in" -msgstr "in" +msgstr "в" msgid "mm" msgstr "мм" +msgid "Part selection" +msgstr "" + +msgid "Fixed step drag" +msgstr "" + +msgid "Single sided scaling" +msgstr "" + msgid "Position" msgstr "Позиція" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "Обертання" +msgid "Rotate (relative)" +msgstr "" msgid "Scale ratios" msgstr "Коефіцієнти масштабування" @@ -239,14 +382,11 @@ msgid "Volume Operations" msgstr "Операції з об’ємом" msgid "Translate" -msgstr "Перекласти" +msgstr "Перемістити" msgid "Group Operations" msgstr "Групова орієнтація" -msgid "Set Position" -msgstr "Встановити позицію" - msgid "Set Orientation" msgstr "Встановити орієнтацію" @@ -259,24 +399,33 @@ msgstr "Скинути позицію" msgid "Reset Rotation" msgstr "Скинути орієнтацію" -msgid "World coordinates" -msgstr "Світові координати" - msgid "Object coordinates" msgstr "Координати об'єкта" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "Глобальні координати" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "" + +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + +msgid "Part coordinates" +msgstr "" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Розмір" -msgid "%" -msgstr "%" - msgid "uniform scale" -msgstr "єдина шкала" +msgstr "рівномірне масштабування" msgid "Planar" msgstr "Плоский" @@ -288,10 +437,10 @@ msgid "Auto" msgstr "Авто" msgid "Manual" -msgstr "Manual" +msgstr "Вручну" msgid "Plug" -msgstr "Підключи" +msgstr "Під'єднати" msgid "Dowel" msgstr "Дюбель" @@ -315,7 +464,7 @@ msgid "Keep orientation" msgstr "Зберегти орієнтацію" msgid "Place on cut" -msgstr "Помістити на зріз" +msgstr "Покласти на зріз" msgid "Flip upside down" msgstr "Перевернути догори дном" @@ -338,6 +487,12 @@ msgstr "Форма" msgid "Depth" msgstr "Глибина" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Обертання" + msgid "Groove" msgstr "Жолобок" @@ -433,16 +588,13 @@ msgid "Space" msgstr "Пробіл" msgid "Space proportion related to radius" -msgstr "Пропорція простору в залежності від радіусу" +msgstr "Пропорція простору в залежності від радіуса" msgid "Confirm connectors" msgstr "Підтвердити з'єднувачі" -msgid "Cancel" -msgstr "Скасувати" - msgid "Build Volume" -msgstr "Створіть об'єм" +msgstr "Робочий об'єм" msgid "Flip cut plane" msgstr "Перевернути площину зрізу" @@ -467,10 +619,10 @@ msgid "Edit connectors" msgstr "Редагувати з'єднувачі" msgid "Add connectors" -msgstr "Додати з'єднувачі" +msgstr "Додати з'єднання" msgid "Reset cut" -msgstr "Скинути зріз" +msgstr "Скинути розрізання" msgid "Reset cutting plane and remove connectors" msgstr "Скиньте площину різання та зніміть з'єднувачі" @@ -482,7 +634,7 @@ msgid "Lower part" msgstr "Нижня частина" msgid "Keep" -msgstr "Тримати" +msgstr "Залишити" msgid "Flip" msgstr "Перевернути" @@ -494,7 +646,7 @@ msgid "Cut to parts" msgstr "Розрізати на частини" msgid "Perform cut" -msgstr "Виконати вирізання" +msgstr "Виконати розрізання" msgid "Warning" msgstr "Попередження" @@ -505,22 +657,24 @@ msgstr "Виявлено неприпустимі з'єднувачі" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "%1$d зєднання виходить за контур моделі" -msgstr[1] "%1$d зєднання виходить за контур моделі" -msgstr[2] "%1$d зєднань виходить за контур моделі" +msgstr[0] "%1$d з'єднання виходить за контур розрізання" +msgstr[1] "%1$d з'єднання виходить за контур розрізання" +msgstr[2] "%1$d з'єднань виходить за контур розрізання" +msgstr[3] "%1$d з'єднання виходить за контур розрізання" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" -msgstr[0] "%1$d зєднання знаходиться за межами моделі" -msgstr[1] "%1$d зєднання знаходяться за межами моделі" -msgstr[2] "%1$d зєднань знаходяться за межами моделі" +msgstr[0] "%1$d з'єднання знаходиться за межами об'єкту" +msgstr[1] "%1$d з'єднання знаходяться за межами об'єкту" +msgstr[2] "%1$d з'єднань знаходяться за межами об'єкту" +msgstr[3] "%1$d з'єднаня знаходяться за межами об'єкту" msgid "Some connectors are overlapped" msgstr "Деякі роз'єми перекриваються" msgid "Select at least one object to keep after cutting." -msgstr "Виберіть принаймні один об'єкт, який ви збережете після вирізання." +msgstr "Виберіть принаймні один об'єкт, який треба зберегти після розрізання." msgid "Cut plane is placed out of object" msgstr "Площина зрізу розміщена поза об'єктом" @@ -599,14 +753,10 @@ msgstr "%d трикутники" msgid "Show wireframe" msgstr "Показати каркас" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "Не можна застосовувати під час попереднього перегляду процесу." -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "Операція вже скасовується. Зачекайте кілька секунд." msgid "Face recognition" @@ -615,14 +765,8 @@ msgstr "Розпізнавання обличчя" msgid "Perform Recognition" msgstr "Виконайте розпізнавання" -msgid "Brush size" -msgstr "Розмір пензля" - -msgid "Brush shape" -msgstr "Форма пензля" - msgid "Enforce seam" -msgstr "Примусове розташування шва" +msgstr "Примусовий шов" msgid "Block seam" msgstr "Блокування шва" @@ -640,7 +784,7 @@ msgid "Leaving Seam painting" msgstr "Leaving Seam Painting" msgid "Paint-on seam editing" -msgstr "Paint-on seam editing" +msgstr "" #. TRN - Input label. Be short as possible #. Select look of letter shape @@ -657,7 +801,7 @@ msgid "Angle" msgstr "Кут" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "Вбудована глибина" @@ -670,8 +814,8 @@ msgstr "Поверхня" msgid "Horizontal text" msgstr "Горизонтальний текст" -msgid "Shift + Mouse move up or down" -msgstr "Shift + переміщення миші вгору або вниз" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "Повернути текст" @@ -715,7 +859,7 @@ msgid "ITALIC" msgstr "КУРСИВ" msgid "SWISS" -msgstr "SWISS" +msgstr "" msgid "MODERN" msgstr "СУЧАСНИЙ" @@ -727,7 +871,7 @@ msgid "Default font" msgstr "Типовий шрифт" msgid "Advanced" -msgstr "Додатково" +msgstr "Розширені" msgid "" "The text cannot be written using the selected font. Please try choosing a " @@ -772,7 +916,7 @@ msgid "Operation" msgstr "Операція" msgid "Join" -msgstr "Обєднання" +msgstr "Об'єднати" msgid "Click to change text into object part." msgstr "Натисніть, щоб змінити текст на частині об'єкта." @@ -797,7 +941,7 @@ msgid "Change Text Type" msgstr "Змінити тип тексту" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "Перейменувати стиль(%1%) для тиснення тексту" msgid "Name can't be empty." @@ -989,9 +1133,9 @@ msgid "Distance of the center of the text to the model surface." msgstr "Відстань від центру тексту до поверхні моделі." msgid "Undo rotation" -msgstr "Відмінити обертання" +msgstr "Скасувати обертання" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "Обертати текст за годинниковою стрілкою." msgid "Unlock the text's rotation when moving text along the object's surface." @@ -1012,10 +1156,14 @@ msgstr "Текст лицьовою стороною до камери" msgid "Orient the text towards the camera." msgstr "Зорієнтувати текст у напрямку камери." +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "Не вдається завантажити точно такий самий шрифт(\"%1%\"). Програма вибрала " "схожий шрифт(\"%2%\"). Ви повинні встановити шрифт, щоб дозволити " @@ -1131,13 +1279,13 @@ msgstr "Відкритий контур із заливкою" msgid "Undefined stroke type" msgstr "Невизначений тип обведення" -msgid "Path can't be healed from selfintersection and multiple points." +msgid "Path can't be healed from self-intersection and multiple points." msgstr "" "Контур не може бути виправлений від проблеми самоперетину і крапок, що " "дублюються." msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." msgstr "" "Фінальна форма містить самоперетин або декілька точок з однаковою " @@ -1147,7 +1295,7 @@ msgstr "" msgid "Shape is marked as invisible (%1%)." msgstr "Фігура позначена як невидима (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Заливка фігури (%1%) не підтримується: %2%." @@ -1177,7 +1325,8 @@ msgstr "Перезавантажте файл SVG з диска." msgid "Change file" msgstr "Змінити файл" -msgid "Change to another .svg file" +#, fuzzy +msgid "Change to another SVG file." msgstr "Змінити на інший файл .svg" msgid "Forget the file path" @@ -1204,7 +1353,7 @@ msgstr "Зберегти як" msgid "Save SVG file" msgstr "Зберегти SVG файл" -msgid "Save as '.svg' file" +msgid "Save as SVG file." msgstr "Зберегти у форматі '.svg" msgid "Size in emboss direction." @@ -1273,6 +1422,9 @@ msgstr "Парсер NanoSVG не може прочитати файл (%1%)." msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "Файл SVG не містить жодного шляху для рельєфного тексту (%1%)." +msgid "No feature" +msgstr "" + msgid "Vertex" msgstr "Вершина" @@ -1297,9 +1449,6 @@ msgstr "Центр ребра" msgid "Center of circle" msgstr "Центр кола" -msgid "ShiftLeft mouse button" -msgstr "ShiftЛіва кнопка миші" - msgid "Select feature" msgstr "Виберіть функцію" @@ -1307,7 +1456,7 @@ msgid "Select point" msgstr "Виберіть точку" msgid "Delete" -msgstr "Видалити" +msgstr "Delete" msgid "Restart selection" msgstr "Вибрати заново" @@ -1315,18 +1464,24 @@ msgstr "Вибрати заново" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "Зняти виділення" +msgid "Cancel a feature until exit" +msgstr "Скасувати функцію до виходу" msgid "Measure" msgstr "Виміряти" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "" +"Підтвердіть коефіцієнт вибуху = 1 і, будь ласка, виберіть принаймні один " +"об’єкт" + msgid "Edit to scale" msgstr "Редагувати масштаб" msgctxt "Verb" -msgid "Scale" -msgstr "Масштаб" +msgid "Scale all" +msgstr "Масштабувати все" msgid "None" msgstr "Ні" @@ -1340,6 +1495,48 @@ msgstr "Довжина" msgid "Selection" msgstr "Вибір" +msgid " (Moving)" +msgstr " (Переміщення)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Виберіть 2 грані на об’єктах і \n" +" з’єднайте об’єкти разом." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Виберіть 2 точки або кола на об’єктах та \n" +" вкажіть відстань між ними." + +msgid "Face" +msgstr "Грань" + +msgid " (Fixed)" +msgstr " (Фіксований)" + +msgid "Point" +msgstr "Точка" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Особливість 1 скинута, \n" +"Особливість 2 тепер особливість 1" + +msgid "Warning: please select Plane's feature." +msgstr "Попередження: будь ласка, виберіть характеристику площини." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Попередження: будь ласка, виберіть характеристику точки або кола." + +msgid "Warning: please select two different meshes." +msgstr "Попередження: будь ласка, виберіть дві різні сітки." + msgid "Copy to clipboard" msgstr "Копіювати в буфер обміну" @@ -1355,8 +1552,26 @@ msgstr "Пряма відстань" msgid "Distance XYZ" msgstr "Відстань XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "Паралельний" + +msgid "Center coincidence" +msgstr "Співпадіння центрів" + +msgid "Feature 1" +msgstr "Особливість 1" + +msgid "Reverse rotation" +msgstr "Зворотне обертання" + +msgid "Rotate around center:" +msgstr "Обертати навколо центру:" + +msgid "Parallel distance:" +msgstr "Паралельна відстань:" + +msgid "Flip by Face 2" +msgstr "Перевернути за Гранню 2" msgid "Notice" msgstr "Повідомлення" @@ -1393,8 +1608,11 @@ msgstr "" "Файл конфігурації “%1%” був завантажений, але деякі значення не були " "розпізнані." +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "Snapmaker Orca завершить роботу через брак пам'яті. Можливо, це помилка. Ми " @@ -1444,6 +1662,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "Виконання WebView2" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + #, c-format, boost-format msgid "" "%s\n" @@ -1491,27 +1713,27 @@ msgstr "Завантаження поточних налаштувань" msgid "Loading a mode view" msgstr "Завантаження режиму перегляду" -msgid "Choose one file (3mf):" -msgstr "Виберіть один файл (3mf):" +msgid "Choose one file (3MF):" +msgstr "Виберіть один файл (3MF):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "" -"Виберіть один або кілька файлів (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +"Виберіть один або кілька файлів (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "Виберіть один або кілька файлів (3mf/step/stl/svg/obj/amf):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Виберіть один або кілька файлів (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Виберіть ZIP файл" -msgid "Choose one file (gcode/3mf):" -msgstr "Виберіть один файл (gcode/3mf):" +msgid "Choose one file (GCODE/3MF):" +msgstr "Виберіть один файл (GCODE/3MF):" msgid "Some presets are modified." msgstr "Деякі налаштування змінено." msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "" "Ви можете зберегти модифіковані налаштування в новому проекті, відмінити або " @@ -1524,11 +1746,11 @@ msgid "new or open project file is not allowed during the slicing process!" msgstr "новий або відкритий файл проекту не дозволяється в процесі нарізки!" msgid "Open Project" -msgstr "Відкрити проект" +msgstr "Відкрити проєкт" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" +"version before it can be used normally." msgstr "" "Версія студії Bambu надто низька, її необхідно оновити до останньоїверсії, " "перш ніж її можна буде використовувати у звичайному режимі" @@ -1600,7 +1822,7 @@ msgid "Snapmaker Orca GUI initialization failed" msgstr "Помилка ініціалізації графічного інтерфейсу Snapmaker Orca" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "Критична помилка, виявлено виняток: %1%" msgid "Quality" @@ -1616,7 +1838,7 @@ msgid "Support" msgstr "Підтримки" msgid "Flush options" -msgstr "Параметри очищення" +msgstr "Параметри промивки" msgid "Speed" msgstr "Швидкість" @@ -1625,22 +1847,28 @@ msgid "Strength" msgstr "Міцність" msgid "Top Solid Layers" -msgstr "Верхніх суцільних шарів" +msgstr "Верхніх Суцільних Шарів" msgid "Top Minimum Shell Thickness" msgstr "Мінімальна товщина верхньої оболонки" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" -msgstr "Нижніх суцільних шарів" +msgstr "Нижніх Суцільних Шарів" msgid "Bottom Minimum Shell Thickness" msgstr "Мінімальна товщина нижньої оболонки" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "Розгладжування" msgid "Fuzzy Skin" -msgstr "Нечітка оболонка" +msgstr "Шорстка Поверхня" msgid "Extruders" msgstr "Екструдери" @@ -1649,7 +1877,7 @@ msgid "Extrusion Width" msgstr "Ширина екструзії" msgid "Wipe options" -msgstr "Параметри очищення" +msgstr "Параметри протирання" msgid "Bed adhesion" msgstr "Прилипання до столу" @@ -1667,7 +1895,7 @@ msgid "Add support blocker" msgstr "Додати блокувальник підтримки" msgid "Add support enforcer" -msgstr "Додати примусову підтримку" +msgstr "Додати примусові підтримки" msgid "Add text" msgstr "Додати текст" @@ -1702,6 +1930,9 @@ msgstr "Видалити" msgid "Delete the selected object" msgstr "Видалення вибраних моделей" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "Завантажити..." @@ -1723,6 +1954,9 @@ msgstr "Тороїд" msgid "Orca Cube" msgstr "Orca Куб" +msgid "Orca Tolerance Test" +msgstr "Тест на допуски ORCA" + msgid "3DBenchy" msgstr "3DBenchy" @@ -1740,7 +1974,7 @@ msgstr "«Струнне пекло» Orca" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" @@ -1771,7 +2005,7 @@ msgid "Set as individual objects" msgstr "Встановити як окремі об'єкти" msgid "Fill bed with copies" -msgstr "Заповнити весь стіл копіями" +msgstr "Заповнити пластину копіями" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "Заповніть решту площу столу копіями вибраного об'єкта" @@ -1783,10 +2017,10 @@ msgid "Fix model" msgstr "Виправити модель" msgid "Export as one STL" -msgstr "Експортувати як один файл STL" +msgstr "Експортувати як один STL" msgid "Export as STLs" -msgstr "Експортувати як файли STL" +msgstr "Експортувати як декілька STL" msgid "Reload from disk" msgstr "Перезавантажити з диска" @@ -1800,6 +2034,12 @@ msgstr "Замінити на STL" msgid "Replace the selected part with new STL" msgstr "Замініть вибрану частину новим STL" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "Зміна філаменту" @@ -1823,30 +2063,30 @@ msgid "Scale an object to fit the build volume" msgstr "Відмасштабувати під область друку" msgid "Flush Options" -msgstr "Опції очищення" +msgstr "Параметри Промивки" msgid "Flush into objects' infill" -msgstr "Очищення у заповненні моделі" +msgstr "Промивати у заповнення об'єкта" msgid "Flush into this object" -msgstr "Очищення у модель" +msgstr "Промивати в об'єкт" msgid "Flush into objects' support" -msgstr "Очищення на підтримку" +msgstr "Промивати у підтримки об'єкта" msgid "Edit in Parameter Table" msgstr "Редагування таблиці параметрів" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "Перетворити розміри з дюймів" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "Відновити розміри в дюйми" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "Перетворити з метричної" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "Відновити в метричну" msgid "Assemble" @@ -1933,9 +2173,18 @@ msgstr "Розділити вибраний об'єкт" msgid "Auto orientation" msgstr "Автоматична орієнтація" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "Автоматично орієнтуйте об'єкт для покращення якості друку." +msgid "Edit" +msgstr "Редагувати" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "Вибрати все" @@ -1949,10 +2198,10 @@ msgid "delete all objects on current plate" msgstr "видалити всі об'єкти на поточній пластині" msgid "Arrange" -msgstr "Організувати" +msgstr "Впорядкувати" msgid "arrange current plate" -msgstr "упорядкувати поточну табличку" +msgstr "впорядкувати поточну пластину" msgid "Reload All" msgstr "Перезавантажити все" @@ -1972,6 +2221,30 @@ msgstr "Видалити пластину" msgid "Remove the selected plate" msgstr "Видалити вибрану пластину" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "Зробити копію" @@ -1981,9 +2254,18 @@ msgstr "Спростити модель" msgid "Center" msgstr "Центр" +msgid "Drop" +msgstr "Кинути" + msgid "Edit Process Settings" msgstr "Редагувати налаштування процесу друку" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "Редагувати параметри друку для одного об'єкта" @@ -2006,14 +2288,15 @@ msgid "Name" msgstr "Ім'я" msgid "Fila." -msgstr "Філа." +msgstr "Філам." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "%1$d помилка виправлена" msgstr[1] "%1$d помилки виправлені" -msgstr[2] "%1$d помилки виправлені" +msgstr[2] "%1$d помилок виправлено" +msgstr[3] "%1$d помилки виправлено" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." @@ -2021,6 +2304,7 @@ msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "Помилка: %1$d відкрите ребро." msgstr[1] "Помилка: %1$d відкритих ребер." msgstr[2] "Помилка: %1$d відкритих ребер." +msgstr[3] "" msgid "Remaining errors" msgstr "Залишилось помилок" @@ -2031,9 +2315,10 @@ msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d відкрите ребро" msgstr[1] "%1$d відкритих ребер" msgstr[2] "%1$d відкритих ребер" +msgstr[3] "" -msgid "Right click the icon to fix model object" -msgstr "Клацніть правою кнопкою миші значок, щоб виправити об'єкт моделі" +msgid "Click the icon to repair model object" +msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "" @@ -2085,6 +2370,9 @@ msgstr "" "Переключення в режим роботи з моделями для редагування налаштувань друку " "вибраних моделей." +msgid "Remove paint-on fuzzy skin" +msgstr "" + msgid "Delete connector from object which is a part of cut" msgstr "Видалити конектор з об'єкта, який є частиною розрізу" @@ -2103,10 +2391,10 @@ msgstr "" msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "Ця дія призведе до видалення інформації про розріз.\n" "Після цього узгодженість моделі не може бути гарантована.\n" @@ -2120,8 +2408,8 @@ msgstr "Видалити всі з'єднання" msgid "Deleting the last solid part is not allowed." msgstr "Видалення останньої твердотільного частини не допускається." -msgid "The target object contains only one part and can not be splited." -msgstr "Цільова модель єдина і не може бути поділена на частини." +msgid "The target object contains only one part and can not be split." +msgstr "" msgid "Assembly" msgstr "Збірка" @@ -2163,13 +2451,13 @@ msgid "Selection conflicts" msgstr "Конфлікти у виборі" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "" "Якщо перший вибраний елемент є об'єктом, другий також має бути об'єктом." msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "" "Якщо перший обраний елемент є частиною, другий має бути частиноютого ж\n" "об'єкту." @@ -2200,15 +2488,17 @@ msgstr "Перейменування" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" -msgstr[0] "Наступна частина моделі успішно відремонтована" -msgstr[1] "Наступні частини моделі успішно відремонтовані" -msgstr[2] "Наступні частини моделі успішно відремонтовані" +msgstr[0] "Наступна модель об'єкту успішно відремонтована" +msgstr[1] "Наступні моделі об'єкту успішно відремонтовані" +msgstr[2] "Наступних моделей об'єкту успішно відремонтовано" +msgstr[3] "Наступні моделі об'єкту успішно відремонтовані" msgid "Failed to repair following model object" msgid_plural "Failed to repair following model objects" -msgstr[0] "Не вдалося полагодити таку частину моделі" -msgstr[1] "Не вдалося полагодити такі частини моделі" -msgstr[2] "Не вдалося полагодити такі частини моделі" +msgstr[0] "Не вдалося відремонтувати таку частину моделі" +msgstr[1] "Не вдалося відремонтувати такі частини моделі" +msgstr[2] "Не вдалося відремонтувати таких частин моделі" +msgstr[3] "Не вдалося відремонтувати такі частини моделі" msgid "Repairing was canceled" msgstr "Ремонт було скасовано" @@ -2236,7 +2526,7 @@ msgstr "" "одну клітинку можна скопіювати лише в одну або декілька клітинок у тому " "самому стовпці" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "копіювання кількох клітинок не підтримується" msgid "Outside" @@ -2257,11 +2547,14 @@ msgstr "Автоматична Кайма" msgid "Mouse ear" msgstr "Мишаче вушко" +msgid "Painted" +msgstr "Мальована" + msgid "Outer brim only" -msgstr "Кайма тільки зовні" +msgstr "Тільки зовні" msgid "Inner brim only" -msgstr "Кайма тільки всередині" +msgstr "Тільки всередині" msgid "Outer and inner brim" msgstr "Зовні та всередині" @@ -2273,7 +2566,7 @@ msgid "Outer wall speed" msgstr "Швидкість зовнішньої стінки" msgid "Plate" -msgstr "Стіл" +msgstr "Пластина" msgid "Brim" msgstr "Кайма" @@ -2327,7 +2620,7 @@ msgid "Custom G-code" msgstr "G-код користувача" msgid "Enter Custom G-code used on current layer:" -msgstr "Введіть G-код користувача, що використовується в поточному шарі:" +msgstr "Введіть G-код користувача, що використовується на поточному шарі:" msgid "Jump to Layer" msgstr "Перейти до шару" @@ -2357,7 +2650,7 @@ msgid "Filament " msgstr "Філамент " msgid "Change filament at the beginning of this layer." -msgstr "Заміна нитки на початку цього шару." +msgstr "Замінити філамент на початку цього шару." msgid "Delete Pause" msgstr "Видалити паузу" @@ -2372,7 +2665,7 @@ msgid "Delete Custom G-code" msgstr "Видалити G-код користувача" msgid "Delete Filament Change" -msgstr "Видалити команду заміни нитки" +msgstr "Видалити команду заміни філаменту" msgid "No printer" msgstr "Принтер не вибраний" @@ -2407,23 +2700,8 @@ msgstr "Перевірте мережеве з'єднання принтера msgid "Connecting..." msgstr "Підключення..." -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "Порожній" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "Автоматична заміна" - -msgid "AMS not connected" -msgstr "АМС не підключено" +msgid "Auto-refill" +msgstr "" msgid "Load" msgstr "Завантажити" @@ -2431,33 +2709,127 @@ msgstr "Завантажити" msgid "Unload" msgstr "Вивантаження" -msgid "Ext Spool" -msgstr "Зовнішня котушка" - -msgid "Tips" -msgstr "Поради" - -msgid "Guide" -msgstr "Гід" - -msgid "Retry" -msgstr "Повторити спробу" - -msgid "Calibrating AMS..." -msgstr "Калібрування АМС..." - -msgid "A problem occurred during calibration. Click to view the solution." +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." msgstr "" -"Під час калібрування виникла проблема. Натисніть, щоб переглянути рішення." +"Виберіть слот AMS, а потім натисніть кнопку “Завантажити” або “Вивантажити”, " +"щоб автоматично завантажити або вивантажити філаменти." -msgid "Calibrate again" -msgstr "Повторити калібрування" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Cancel calibration" -msgstr "Скасувати калібрування" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Фільтрувати" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Охолодження" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Верх" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." -msgstr "Очікування…" +msgstr "Очікування..." msgid "Heat the nozzle" msgstr "Нагрійте сопло" @@ -2471,11 +2843,11 @@ msgstr "Відтягніть поточний філамент" msgid "Push new filament into extruder" msgstr "Вставте новий філамент в екструдер" -msgid "Purge old filament" -msgstr "Очистіть старий філамент" +msgid "Grab new filament" +msgstr "Візьміть новий філамент" -msgid "Feed Filament" -msgstr "Подача нитки філаменту" +msgid "Purge old filament" +msgstr "Очистити від старого філаменту" msgid "Confirm extruded" msgstr "Підтвердити витіснення" @@ -2483,37 +2855,28 @@ msgstr "Підтвердити витіснення" msgid "Check filament location" msgstr "Перевірити розташування філаменту" -msgid "Grab new filament" -msgstr "Візьміть новий філамент" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -"Виберіть слот AMS, а потім натисніть кнопку “Завантажити” або “Вивантажити”, " -"щоб автоматично завантажити або вивантажити філаменти." -msgid "Edit" -msgstr "Редагувати" +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "Всі вибрані об'єкти знаходяться на заблокованій пластині,\n" -"Ми не можемо робити авто-розстановку на цих об'єктах." +"Ми не можемо виконати автоматичне впорядкування цих об'єктів." -msgid "No arrangable objects are selected." -msgstr "" -"Всі вибрані об'єкти знаходяться на заблокованій пластині,\\n\n" -"Ми не можемо робити авто-розстановку на цих об'єктах." +msgid "No arrangeable objects are selected." +msgstr "Не вибрано жодного доступного для впорядкування об'єкта." msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "" "Ця пластина заблокована,\n" -"Ми не можемо зробити автоаранжування на цій пластині." +"Ми не можемо зробити автоматичне впорядкування на цій пластині." msgid "Arranging..." msgstr "Організація..." @@ -2536,7 +2899,8 @@ msgstr "Організація зроблена." msgid "" "Arrange failed. Found some exceptions when processing object geometries." msgstr "" -"Помилка розміщення. Виявлено деякі винятки під час обробки геометрії моделей." +"Помилка впорядкування. Виявлено деякі винятки під час обробки геометрії " +"моделей." #, c-format, boost-format msgid "" @@ -2544,20 +2908,20 @@ msgid "" "bed:\n" "%s" msgstr "" -"При розміщенні були проігноровані такі моделі, які не розміщуються на одному " -"столі:\n" +"При впорядкуванні були проігноровані такі моделі, які не вмістилися на " +"одному столі:\n" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "Всі вибрані об'єкти знаходяться на заблокованій пластині,\n" "Ми не можемо робити автоорієнтацію на цих об'єктах." msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "Ця пластина заблокована,\n" "Ми не можемо зробити автоорієнтацію на цій пластині." @@ -2613,7 +2977,7 @@ msgid "Cloud service connection failed. Please try again." msgstr "" "Не вдалося підключитися до хмарного сервісу. Будь ласка, спробуйте ще раз." -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "Файл друку не знайдено, наріжте ще раз." msgid "" @@ -2641,7 +3005,7 @@ msgstr "" "Розмір файлу друку занадто великий. Будь ласка, зменште розмір файлу і " "спробуйте ще раз." -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "" "Файл друку не знайдено; будь ласка, знову наріжте його і відправте для друку." @@ -2679,21 +3043,60 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Успішно відправлено. Автоматично перейде на наступну сторінку через %sс" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "Перед друком через локальну мережу необхідно вставити картку SD." +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +#, fuzzy +msgid "Sending G-code file over LAN" msgstr "Надсилання файлу gcode по локальній мережі" -msgid "Sending gcode file to sdcard" +#, fuzzy +msgid "Sending G-code file to SD card" msgstr "Надсилання файлу gcode на карту SD" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Успішно надіслано. Закрити поточну сторінку в %sс" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "Перед надсиланням на принтер необхідно вставити картку SD." +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "Імпорт архіву SLA" @@ -2733,10 +3136,10 @@ msgstr "Завантаження" msgid "Download failed" msgstr "Помилка завантаження" -msgid "Cancelled" +msgid "Canceled" msgstr "Скасовано" -msgid "Install successfully." +msgid "Installed successfully" msgstr "Успішне встановлення." msgid "Installing" @@ -2760,8 +3163,8 @@ msgstr "Snapmaker Orca знаходиться під ліцензією " msgid "GNU Affero General Public License, version 3" msgstr "Стандартна громадська ліцензія GNU Affero, версія 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca is Based on Orca Slicer" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca базується на PrusaSlicer та BambuStudio" msgid "Libraries" msgstr "Бібліотеки" @@ -2778,9 +3181,6 @@ msgstr "" msgid "About %s" msgstr "Про %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca базується на BambuStudio, PrusaSlicer та SuperSlicer." @@ -2809,9 +3209,6 @@ msgstr "Підтвердити" msgid "Close" msgstr "Закрити" -msgid "Colour" -msgstr "Колір" - msgid "" "Nozzle\n" "Temperature" @@ -2830,10 +3227,7 @@ msgid "The input value should be greater than %1% and less than %2%" msgstr "Вхідне значення має бути більше %1% і менше %2%" msgid "SN" -msgstr "SN" - -msgid "Setting AMS slot information while printing is not supported" -msgstr "Зміна інформації про слоти AMS під час друку не підтримується" +msgstr "СН" msgid "Factors of Flow Dynamics Calibration" msgstr "Фактори Калібрування динамічного потоку" @@ -2847,12 +3241,15 @@ msgstr "Коэф. K" msgid "Factor N" msgstr "Коэф. N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "Зміна інформації про слоти AMS під час друку не підтримується" + msgid "Setting Virtual slot information while printing is not supported" msgstr "" "Налаштування інформації віртуального слота під час друку не підтримується" msgid "Are you sure you want to clear the filament information?" -msgstr "Ви впевнені, що хочете видалити інформацію про нитки?" +msgstr "Ви впевнені, що хочете видалити інформацію про філамент?" msgid "You need to select the material type and color first." msgstr "Спочатку потрібно вибрати тип матеріалу та колір." @@ -2865,6 +3262,15 @@ msgstr "Будь ласка введіть коректне значення (K msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Будь ласка введіть коректне значення (K в %.1f~%.1f, N в %.1f~%.1f)" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "Інший колір" @@ -2880,8 +3286,8 @@ msgid "" "auto-filled by selecting a filament preset." msgstr "" "Температура сопла та максимальна об'ємна швидкість вплинуть на результати " -"калібрування. Будь ласка, введіть такі ж значення, як при друку. Вони можуть " -"бути автозаповнені при виборі попередньо налаштованої нитки." +"калібрування. Будь ласка, введіть такі ж значення, як при друці. Вони можуть " +"бути заповнені автоматично при виборі профілю філаменту." msgid "Nozzle Diameter" msgstr "Діаметр сопла" @@ -2898,15 +3304,9 @@ msgstr "Температура столу" msgid "Max volumetric speed" msgstr "Максимальна об'ємна швидкість" -msgid "℃" -msgstr "℃" - msgid "Bed temperature" msgstr "Температура столу" -msgid "mm³" -msgstr "мм³" - msgid "Start calibration" msgstr "Почати калібрування" @@ -2948,14 +3348,79 @@ msgstr "Калібрування динамічного потоку" msgid "Step" msgstr "Крок" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "Слоти AMS" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "" + +msgid "External" +msgstr "Зовнішні" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Сопло" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." msgstr "" -"Примітка. Можна вибрати лише слоти AMS, завантажені одним і тим же типом " -"матеріалу." msgid "Enable AMS" msgstr "Увімкнути AMS" @@ -2967,15 +3432,12 @@ msgid "Disable AMS" msgstr "Вимкнути AMS" msgid "Print with the filament mounted on the back of chassis" -msgstr "Друк із ниткою, встановленою на задній частині корпусу" - -msgid "Current Cabin humidity" -msgstr "Поточна вологість у кабіні" +msgstr "Друкувати філаментом, встановленим на задній частині корпусу" msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "Будь ласка, змініть осушувач, коли він стає занадто вологим. Індикатор може " @@ -2984,7 +3446,7 @@ msgstr "" "низькі температури також сповільнюють процес." msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "" "Налаштуйте, який слот AMS слід використовувати для нитки, яка " "використовується в завдання на друк" @@ -2993,7 +3455,7 @@ msgid "Filament used in this print job" msgstr "Філамент, який використовується в цьому завданні на друк" msgid "AMS slot used for this filament" -msgstr "Слот AMS, який використовується для цієї нитки" +msgstr "Слот AMS, який використовується для цього філаменту" msgid "Click to select AMS slot manually" msgstr "Натисніть, щоб вибрати слот AMS вручну" @@ -3005,12 +3467,21 @@ msgid "Print using materials mounted on the back of the case" msgstr "" "Друк із використанням матеріалів, закріплених на задній частині корпусу" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "Друк філаментами в ams" msgid "Print with filaments mounted on the back of the chassis" msgstr "Друк із нитками, встановленими на задній частині корпусу" +msgid "Auto Refill" +msgstr "Автоматична заміна" + +msgid "Left" +msgstr "Ліво" + +msgid "Right" +msgstr "Право" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." @@ -3018,9 +3489,17 @@ msgstr "" "Коли поточний матеріал закінчується, принтер буде продовжувати друк у " "наступному порядку." +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "Група" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "Принтер не підтримує функцію автозаправлення." @@ -3031,15 +3510,10 @@ msgstr "" "активуйте її у налаштуваннях Автоматичного заправлення." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Якщо в AMS є два ідентичні філаменти, резервне копіювання філаменту буде " -"увімкнено.\n" -"(Зараз підтримується автоматичне забезпечення споживних матеріалів " -"однакового бренду, типу матеріалу і кольору)" msgid "DRY" msgstr "СУХИЙ" @@ -3061,7 +3535,7 @@ msgstr "" "Bambu Lab. Це займає близько 20 секунд." msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "Примітка: якщо під час друку вставляється нова пластикова нитка, AMS " @@ -3080,8 +3554,8 @@ msgstr "Оновити дані при увімкненні принтера" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "AMS автоматично зчитує інформацію про вставлений філамент. Це займе близько " "1 хвилини. У процесі зчитування крутиться котушка." @@ -3099,20 +3573,16 @@ msgid "Update remaining capacity" msgstr "Оновлювати ємність, що залишилася" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS зчитує інформацію про витратний матеріал Bambu та розраховує його " -"залишкову ємність на котушці. Залишкова ємність автоматично оновлюється в " -"процесі друку." msgid "AMS filament backup" msgstr "Резервування матеріалу AMS" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "" "AMS перейде на іншу котушку з тими самими властивостями автоматично, коли " "поточний філамент закінчиться" @@ -3172,10 +3642,14 @@ msgstr "" "Відбулася помилка. Можливо не вистачає системноъ пам'яті або це баг самої " "програми" -msgid "Please save project and restart the program. " -msgstr "Збережіть проект і перезапустіть програму. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "" -msgid "Processing G-Code from Previous file..." +msgid "Please save project and restart the program." +msgstr "Збережіть проект і перезапустіть програму." + +msgid "Processing G-code from Previous file..." msgstr "Обробка G-коду з попереднього файлу..." msgid "Slicing complete" @@ -3208,7 +3682,7 @@ msgstr "Запуск скриптів постобробки" msgid "Successfully executed post-processing script" msgstr "Скрипт післяобробки успішно виконаний" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "Під час експорту G-коду сталася невідома помилка." #, boost-format @@ -3259,12 +3733,12 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "Файл G-коду експортується до %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "Невідома помилка під час експорту G-коду." -#, boost-format +#, fuzzy, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" @@ -3281,228 +3755,6 @@ msgstr "" "Планування завантаження в `%1%`. Див. вікно -> Черга завантаження на хост " "друку" -msgid "Device" -msgstr "Принтер" - -msgid "Task Sending" -msgstr "Відправка завдання" - -msgid "Task Sent" -msgstr "Завдання надіслане" - -msgid "Edit multiple printers" -msgstr "Редагувати кілька принтерів" - -msgid "Select connected printers (0/6)" -msgstr "Вибрати підключені принтери (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "Вибрати підключені принтери (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "Максимальна кількість принтерів, які можна вибрати, становить %d" - -msgid "Offline" -msgstr "Не в мережі" - -msgid "No task" -msgstr "Немає завдань" - -msgid "View" -msgstr "Вигляд" - -msgid "N/A" -msgstr "Н/Д" - -msgid "Edit Printers" -msgstr "Редагування принтерів" - -msgid "Device Name" -msgstr "Назва пристрою" - -msgid "Task Name" -msgstr "Назва завдання" - -msgid "Device Status" -msgstr "Статус пристрою" - -msgid "Actions" -msgstr "Дії" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" -"Будь ласка, виберіть тут пристрої, якими ви хочете керувати (до 6 пристроїв)" - -msgid "Add" -msgstr "Додати" - -msgid "Idle" -msgstr "Холостий хід" - -msgid "Printing" -msgstr "Друк" - -msgid "Upgrading" -msgstr "Оновлення" - -msgid "Incompatible" -msgstr "Несумісний" - -msgid "syncing" -msgstr "синхронізація" - -msgid "Printing Finish" -msgstr "Друк завершено" - -msgid "Printing Failed" -msgstr "Помилка друку" - -msgid "Printing Pause" -msgstr "Друк на паузі" - -msgid "Prepare" -msgstr "Підготувати" - -msgid "Slicing" -msgstr "Нарізка" - -msgid "Pending" -msgstr "Очікує" - -msgid "Sending" -msgstr "Відправка" - -msgid "Sending Finish" -msgstr "Відправлення завершено" - -msgid "Sending Cancel" -msgstr "Скасовано відправку" - -msgid "Sending Failed" -msgstr "Відправлення не вдалося" - -msgid "Print Success" -msgstr "Успішний друк" - -msgid "Print Failed" -msgstr "Не вдалося надрукувати" - -msgid "Removed" -msgstr "Видалено" - -msgid "Resume" -msgstr "Продовжити" - -msgid "Stop" -msgstr "Стоп" - -msgid "Task Status" -msgstr "Статус завдання" - -msgid "Sent Time" -msgstr "Час відправлення" - -msgid "There are no tasks to be sent!" -msgstr "Немає завдань для відправлення!" - -msgid "No historical tasks!" -msgstr "Істориї завдань немає!" - -msgid "Loading..." -msgstr "Завантаження..." - -msgid "No AMS" -msgstr "Немає AMS" - -msgid "Send to Multi-device" -msgstr "Відправити на багато пристроїв" - -msgid "Preparing print job" -msgstr "Підготовка завдання для друку" - -msgid "Abnormal print file data. Please slice again" -msgstr "Неправильні дані файлу друку. Будь ласка, наріжте знову" - -msgid "There is no device available to send printing." -msgstr "Немає пристрою для надсилання друку." - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" -"Кількість принтерів, що використовуються одночасно, не може дорівнювати 0." - -msgid "Use External Spool" -msgstr "Використовуйте зовнішню катушку" - -msgid "Use AMS" -msgstr "Використовуйте AMS" - -msgid "Select Printers" -msgstr "Вибрати принтери" - -msgid "Ams Status" -msgstr "Статус AMS" - -msgid "Printing Options" -msgstr "Параметри друку" - -msgid "Bed Leveling" -msgstr "Вирівнювання столу" - -msgid "Timelapse" -msgstr "Таймлапс" - -msgid "Flow Dynamic Calibration" -msgstr "Динамічне калібрування потоку" - -msgid "Send Options" -msgstr "Параметри відправки" - -msgid "Send to" -msgstr "Відправити на" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" -"друкувати одночасно (це залежить від того, скільки пристроїв можуть " -"нагріватися одночасно)." - -msgid "Wait" -msgstr "Чекайте" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" -"хвилин на кожну партію. (Це залежить від того, скільки часу потрібно на " -"нагрівання)." - -msgid "Send" -msgstr "Надіслати" - -msgid "Name is invalid;" -msgstr "Некоректне ім'я;" - -msgid "illegal characters:" -msgstr "неприпустимі символи:" - -msgid "illegal suffix:" -msgstr "неприпустимий суфікс:" - -msgid "The name is not allowed to be empty." -msgstr "Ім'я не може бути порожнім." - -msgid "The name is not allowed to start with space character." -msgstr "Ім'я не може починатися з пробілу." - -msgid "The name is not allowed to end with space character." -msgstr "Ім'я не може закінчуватися пробілом." - -msgid "The name length exceeds the limit." -msgstr "Довжина імені перевищує обмеження." - msgid "Origin" msgstr "Початок координат" @@ -3572,12 +3824,13 @@ msgstr "Виберіть файл STL для імпорту моделі сто msgid "Bed Shape" msgstr "Форма столу" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" -"Мінімально рекомендована температура менше 190 градусів або максимально " -"рекомендована температура більше 300 градусів.\n" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3594,29 +3847,30 @@ msgid "" "Please make sure whether to use the temperature to print.\n" "\n" msgstr "" -"Сопло може засмічуватися, якщо температура перевищує діапазон, що " -"рекомендується.\n" -"Будь ласка, переконайтеся, що ви задали потрібну температуру для друку.\n" +"Сопло може бути заблокована, коли температура виходить за межі " +"рекомендованого діапазону.\n" +"Переконайтеся, що для друку використовується температура.\n" +"\n" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "" "Рекомендована температура сопла для цього типу нитки становить [%d, %d] " "градусів Цельсія" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "Надто маленька максимальна об'ємна швидкість.\n" "Скинути до 0,5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " @@ -3625,14 +3879,14 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "Надто маленька висота шару.\n" -"Скинути на 0,2" +"Скинути на 0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "Занадто маленька відстань між розглажуванням.\n" "Скинути на 0,1" @@ -3642,9 +3896,9 @@ msgid "" "\n" "The first layer height will be reset to 0.2." msgstr "" -"Нульова висота першого шару неприпустима.\n" +"Нульова висота першого шару недопустима.\n" "\n" -"Висота першого шару буде скинуто до 0,2." +"Висоту першого шару буде скинуто до 0,2 мм." msgid "" "This setting is only used for model size tunning with small value in some " @@ -3669,29 +3923,29 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"Занадто велика компенсація слонячої ноги недоцільна.\n" -"Якщо є серйозний ефект слонячої ноги, перевірте інші параметри друку.\n" +"Занадто велика компенсація слонової стопи недоцільна.\n" +"Якщо є серйозний ефект слонової стопи, перевірте інші параметри друку.\n" "Наприклад, чи не надто висока температура столу.\n" "\n" "Значення буде скинуто на 0." msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "" -"Альтернативна додаткова стінка не працює, якщо для параметра \"Товщина " -"вертикальної оболонки\" встановлено значення \"Всі\". " +"Чергування додаткової стінки не працює добре, якщо для параметра " +"\"Забезпечити товщину вертикальної оболонки\" встановлено значення \"Всі\"." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "Змінити ці параметри автоматично?\n" -"Так - Змінити в «Забезпечувати верт. товщину оболонки» на значення «Помірне» " -"і включити додаткову стінку, що чергується.\n" -"Ні - Відмовитися від використання додаткової стінки, що чергується" +"Так - Змінити значення «Забезпечити товщину вертикальної оболонки» на " +"«Помірно» і включити чергування додаткової стінки\n" +"Ні - Відмовитися від чергування додаткової стінки" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3700,11 +3954,11 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"Чорнова вежа не працює, коли увімкнено функцію «Змінна висота шарів» або " -"«Незалежна висота шару підтримки»\n" -"Що хочете зберегти?\n" -"ТАК - Зберегти чорнову вежу\n" -"НІ - Зберегти змінну висоту шару та незалежну висоту шару підтримки" +"Підготовча вежа не працює, коли увімкнено функцію «Змінна висота шарів» або " +"«Незалежна висота шарів підтримки»\n" +"Що бажаєте залишити?\n" +"ТАК - Залишити Підготовчу вежу\n" +"НІ - Зберегти Змінну висоту шару та Незалежну висоту шарів підтримки" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3712,10 +3966,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"Чорнова вежа не працює, коли увімкнена функція «Змінна висота шарів».\n" -"Що хочете зберегти?\n" -"Так - Зберегти чорнову вежу\n" -"Ні - Зберегти змінну висоту шарів" +"Підготовча вежа не працює, коли увімкнено функцію «Змінна висота шарів»\n" +"Що бажаєте залишити?\n" +"ТАК - Залишити Підготовчу вежу\n" +"НІ - Залишити Змінну висоту шару" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" @@ -3723,18 +3977,11 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"Чорнова вежа не працює, якщо увімкнена функція «Незалежна висота шару " +"Підготовча вежа не працює, коли увімкнено функцію «Незалежна висота шарів " "підтримки»\n" -"Що хочете зберегти?\n" -"ТАК - Зберегти чорнову вежу\n" -"НІ - Зберегти незалежну висоту шару підтримки" - -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "" -"Під час друку по черзі екструдер може зіткнутися зі спідницею.\n" -"Щоб уникнути цього, скиньте значення шарів спідниці до 1." +"Що бажаєте залишити?\n" +"ТАК - Залишити Підготовчу вежу\n" +"НІ - Залишити незалежну висоту шарів підтримки" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" @@ -3743,34 +3990,53 @@ msgstr "" "seam_slope_start_height має бути менше висоти шару.\n" "Значення скинуто на 0." +#, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"Спіральний режим працює лише тоді, коли петлі на стіні дорівнюють 1, " -"підтримку вимкнено, верхні шари оболонки дорівнюють 0, щільність заповнення " -"дорівнює 0 і тип сповільненої зйомки традиційний." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Но принтери з кінематикою I3 не будуть писати таймлапс." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" -"Змінити ці налаштування автоматично? \n" +"Змінити ці налаштування автоматично?\n" "Так – змінити ці налаштування та автоматично включити режим спіральна ваза\n" "Ні - цього разу відмовитися від використання режиму спіральна ваза" +msgid "Printing" +msgstr "Друк" + msgid "Auto bed leveling" msgstr "Автоматичне вирівнювання столу" msgid "Heatbed preheating" msgstr "Попереднє нагрівання" -msgid "Sweeping XY mech mode" -msgstr "Перевірка XY-механіки" +msgid "Vibration compensation" +msgstr "Компенсація вібрації" msgid "Changing filament" msgstr "Зміна філаменту" @@ -3778,14 +4044,14 @@ msgstr "Зміна філаменту" msgid "M400 pause" msgstr "M400 пауза" -msgid "Paused due to filament runout" -msgstr "Пуаза через датчик філаменту" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "Нагрів хотенду" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "Калібрування екструзії" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "Сканування поверхні столу" @@ -3808,78 +4074,138 @@ msgstr "Очищення сопла" msgid "Checking extruder temperature" msgstr "Перевірка температури сопла" -msgid "Printing was paused by the user" -msgstr "Друк припинено користувачем" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "Пауза під час падіння передньої кришки з голови" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "Калібрування мікролідаром" -msgid "Calibrating extrusion flow" -msgstr "Калібровка потоку екструзії" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "Пауза при несправності температури сопла" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "Пауза при несправності температури столу" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "Вигрузка філаменту" -msgid "Skip step pause" -msgstr "Пропустити команду паузи" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "Завантаження філаменту" -msgid "Motor noise calibration" -msgstr "Калібрування шуму мотора" +msgid "Motor noise cancellation" +msgstr "Скасування шуму мотора" -msgid "Paused due to AMS lost" -msgstr "Пауза через втрату сигналу AMS" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "Пауза через низьку швидкість вентилятора голови" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "Пауза через помилку контролю температури камери" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "Охолодження камери" -msgid "Paused by the Gcode inserted by user" -msgstr "Друк припинено G-кодом, вставленим користувачем" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "Результат калібрування шуму двигуна" -msgid "Nozzle filament covered detected pause" -msgstr "Пауза при виявленні протікання матеріалу" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "Пауза при помилці обрізки нитки" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "Пауза через помилку першого шару" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "Пауза через засмічення сопла" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "Невідомий" -msgid "Fatal" -msgstr "Критична помилка" - -msgid "Serious" -msgstr "Серйозний" - -msgid "Common" -msgstr "Загальний" - msgid "Update successful." msgstr "Оновлення успішне." @@ -3892,34 +4218,57 @@ msgstr "Перевірка не вдалася." msgid "Update failed." msgstr "Не вдалося оновити." -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"Поточна температура камери або цільова температура камери перевищує 45℃. Щоб " -"уникнути забивання екструдера, не дозволяється завантажувати філаменти " -"низької температури (PLA/PETG/TPU)." msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"Філамент низької температури (PLA/PETG/TPU) завантажено в екструдер. Щоб " -"уникнути забивання екструдера, не дозволяється встановлювати температуру " -"камери вище 45℃." msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "Якщо ви встановите температуру камери нижче 40℃, контроль температури камери " "не буде активований, і цільова температура камери автоматично буде " "встановлена на 0℃." -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "Не вдалося запустити завдання друку" msgid "" @@ -3927,36 +4276,82 @@ msgid "" msgstr "Калібрування не підтримує обраний діаметр сопла" msgid "Current flowrate cali param is invalid" -msgstr "Поточна величина калібрування швидкості потоку неприпустима" +msgstr "Поточна величина калібрування потоку некоректна" msgid "Selected diameter and machine diameter do not match" msgstr "Обраний діаметр і діаметр профілю принтера не відповідають один одному" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "Не вдалося згенерувати калібрувальний G-код" msgid "Calibration error" msgstr "Помилка калібрування" -msgid "TPU is not supported by AMS." -msgstr "TPU не підтримується AMS." +msgid "Resume Printing" +msgstr "Відновити друк" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "Bambu PET-CF/PA6-CF не підтримується AMS." - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." +msgid "Resume (defects acceptable)" msgstr "" -"Вологий PVA стає гнучким і може застрягти всередині AMS, будь ласка, " -"обережно висушіть його перед використанням." -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Зупинити друк" + +msgid "Check Assistant" +msgstr "Перевірка помічника" + +msgid "Filament Extruded, Continue" +msgstr "Філамент витиснутий, Продовжити" + +msgid "Not Extruded Yet, Retry" +msgstr "Ще не витиснуто філамент, Повторити" + +msgid "Finished, Continue" +msgstr "Завершено, Продовжити" + +msgid "Load Filament" +msgstr "Завантажте філамент" + +msgid "Filament Loaded, Resume" +msgstr "Філамент завантажений, Відновити" + +msgid "View Liveview" +msgstr "Перегляд в реальному часі" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Виконано" + +msgid "Retry" +msgstr "Повторити спробу" + +msgid "Resume" +msgstr "Продовжити" + +msgid "Unknown error." msgstr "" -"Філаменти CF/GF є жорсткими і крихкими, їх легко можна зламати або вони " -"можуть застряти в AMS, будьте обережні під час використання." msgid "default" msgstr "за замовчуванням" @@ -3968,7 +4363,7 @@ msgstr "Редагування користувацького G-коду (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Вбудовані заповнювачі (Двічі клацніть елемент, щоб додати до G-коду)" -msgid "Search gcode placeholders" +msgid "Search G-code placeholders" msgstr "Пошук G-коду в заповнювачах" msgid "Add selected placeholder to G-code" @@ -4015,7 +4410,7 @@ msgid "Print settings" msgstr "Параметри друку" msgid "Filament settings" -msgstr "Настінні філаменти" +msgstr "Налаштування філаменту" msgid "SLA Materials settings" msgstr "Налаштування матеріалів SLA" @@ -4027,7 +4422,7 @@ msgid "parameter name" msgstr "ім'я параметра" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s не може бути відсотком" #, c-format, boost-format @@ -4069,21 +4464,35 @@ msgstr "Вхідне значення виходить за межі діапа msgid "Some extension in the input is invalid" msgstr "Якесь з розширень вводу некоректне" +msgid "This parameter expects a valid template." +msgstr "" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" + #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Невірний формат. Очікуваний векторний формат: \"%1%\"" +msgid "N/A" +msgstr "Н/Д" + +msgid "Pick" +msgstr "" + +msgid "Summary" +msgstr "" + msgid "Layer Height" -msgstr "Висота шару" +msgstr "Висота Шару" msgid "Line Width" msgstr "Ширина лінії" msgid "Fan Speed" -msgstr "Швидкість вентилятора" - -msgid "Temperature" -msgstr "Температура" +msgstr "Швидкість Вентилятора" msgid "Flow" msgstr "Потік" @@ -4092,7 +4501,7 @@ msgid "Tool" msgstr "Інструмент" msgid "Layer Time" -msgstr "Час шару" +msgstr "Час Шару" msgid "Layer Time (log)" msgstr "Час шару (журнал)" @@ -4110,7 +4519,7 @@ msgid "Flow: " msgstr "Потік: " msgid "Layer Time: " -msgstr "Час шару: " +msgstr "Час Шару: " msgid "Fan: " msgstr "Швидкість вентилятора: " @@ -4118,7 +4527,7 @@ msgstr "Швидкість вентилятора: " msgid "Temperature: " msgstr "Температура: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "Завантаження G-кодів" msgid "Generating geometry vertex data" @@ -4128,13 +4537,13 @@ msgid "Generating geometry index data" msgstr "Генерація даних індексу геометрії" msgid "Statistics of All Plates" -msgstr "Статистика" +msgstr "Статистика всіх пластин" msgid "Display" msgstr "Відображати" msgid "Flushed" -msgstr "Очищення" +msgstr "Промито" msgid "Tower" msgstr "Вежа" @@ -4151,6 +4560,72 @@ msgstr "Загальний час" msgid "Total cost" msgstr "Загальна вартість" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Поради:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Поради" + msgid "up to" msgstr "аж до" @@ -4160,20 +4635,14 @@ msgstr "вище" msgid "from" msgstr "від" -msgid "Color Scheme" -msgstr "Колірна схема" - msgid "Time" msgstr "Час" -msgid "Percent" -msgstr "Відсоток" - -msgid "Used filament" -msgstr "Філамент, що використовується" +msgid "Usage" +msgstr "" msgid "Layer Height (mm)" -msgstr "Висота шару (мм)" +msgstr "Висота Шару (мм)" msgid "Line Width (mm)" msgstr "Ширина лінії (мм)" @@ -4182,7 +4651,7 @@ msgid "Speed (mm/s)" msgstr "Швидкість (мм/с)" msgid "Fan Speed (%)" -msgstr "Швидкість вентилятора (%)" +msgstr "Швидкість Вентилятора (%)" msgid "Temperature (°C)" msgstr "Температура (°С)" @@ -4217,12 +4686,12 @@ msgstr "переміщення" msgid "Extruder" msgstr "Екструдер" -msgid "Filament change times" -msgstr "Час зміни філаменту" - msgid "Cost" msgstr "Витрата" +msgid "Filament change times" +msgstr "Час зміни філаменту" + msgid "Color change" msgstr "Зміна кольору" @@ -4232,10 +4701,7 @@ msgstr "Друк" msgid "Printer" msgstr "Принтер" -msgid "Custom g-code" -msgstr "Користувацький g-код" - -msgid "ToolChange" +msgid "Tool Change" msgstr "Зміна інструменту" msgid "Time Estimation" @@ -4262,45 +4728,46 @@ msgstr "Переключитися в тихий режим" msgid "Switch to normal mode" msgstr "Переключитися у звичайний режим" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "Змінна висота шару" msgid "Adaptive" -msgstr "Адаптивний" +msgstr "Адаптивні" msgid "Quality / Speed" msgstr "Якість/Швидкість" msgid "Smooth" -msgstr "Гладкий" +msgstr "Згладити" msgid "Radius" msgstr "Радіус" msgid "Keep min" -msgstr "Мімальне утримання" - -msgid "Left mouse button:" -msgstr "Ліва кнопка миші:" +msgstr "Зберегти мінімальну висоту" msgid "Add detail" msgstr "Додати деталі" -msgid "Right mouse button:" -msgstr "Права кнопка миші:" - msgid "Remove detail" msgstr "Видалити деталі" -msgid "Shift + Left mouse button:" -msgstr "SHIFT + Ліва кнопка миші:" - msgid "Reset to base" msgstr "Скинути на базу" -msgid "Shift + Right mouse button:" -msgstr "Shift + права кнопка миші:" - msgid "Smoothing" msgstr "Згладжування" @@ -4313,6 +4780,55 @@ msgstr "Збільшення/зменшення області редагува msgid "Sequence" msgstr "Послідовність" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "Дзеркальний об'єкт" @@ -4338,7 +4854,7 @@ msgid "Orient" msgstr "Орієнтація" msgid "Arrange options" -msgstr "Упорядкувати варіанти" +msgstr "Параметри впорядкування" msgid "Spacing" msgstr "Відстань" @@ -4347,7 +4863,7 @@ msgid "0 means auto spacing." msgstr "0 означає автоматичний інтервал." msgid "Auto rotate for arrangement" -msgstr "Автоповорот для розташування" +msgstr "Автоматичне обертання при впорядкуванні" msgid "Allow multiple materials on same plate" msgstr "Дозволити використання декількох матеріалів на одній пластині" @@ -4356,19 +4872,33 @@ msgid "Avoid extrusion calibration region" msgstr "Уникайте області калібрування екструзії" msgid "Align to Y axis" -msgstr "Вирівняти за осі Y" +msgstr "Розташувати вздовж осі Y" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Додати" msgid "Add plate" -msgstr "Додати плату" +msgstr "Додати пластину" -msgid "Auto orient" -msgstr "Автоорієнтація" +msgid "Auto orient all/selected objects" +msgstr "Автоорієнтація всі/вибрані об'єкти" + +msgid "Auto orient all objects on current plate" +msgstr "Автоорієнтація всі об'єкти на поточній пластині" msgid "Arrange all objects" -msgstr "Упорядкувати всі об'єкти" +msgstr "Впорядкувати всі об'єкти" msgid "Arrange objects on selected plates" -msgstr "Розставити об'єкти на столі" +msgstr "Впорядкувати об'єкти на вибраних пластинах" msgid "Split to objects" msgstr "Розділити на об'єкти" @@ -4380,13 +4910,31 @@ msgid "Assembly View" msgstr "Вигляд складання" msgid "Select Plate" -msgstr "Вибір столу" +msgstr "Вибрати пластину" + +msgid "Slicing" +msgstr "Нарізка" + +msgid "Slice all" +msgstr "Нарізати все" + +msgid "Failed" +msgstr "Помилка" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" msgid "Assembly Return" msgstr "Повернення збірки" -msgid "return" -msgstr "повернення" +msgid "Return" +msgstr "Повернення" + +msgid "Toggle Axis" +msgstr "" msgid "Paint Toolbar" msgstr "Панель інструментів малювання" @@ -4400,6 +4948,9 @@ msgstr "Розріз" msgid "Assemble Control" msgstr "Складання керування" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "Загальний обсяг:" @@ -4412,34 +4963,73 @@ msgstr "Об'єм:" msgid "Size:" msgstr "Розмір:" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"Виявлено конфлікти шляхів gcode на рівні %d, z = %.2lf мм. Будь ласка \n" +"Виявлено конфлікти шляхів gcode на рівні %d, Z = %.2lf мм. Будь ласка \n" "розділити конфліктуючі об'єкти далі (%s <-> %s)." -msgid "An object is layed over the boundary of plate." -msgstr "Об'єкт накладений на межу столу." +msgid "An object is laid over the plate boundaries." +msgstr "Об'єкт виходить за межі пластини." msgid "A G-code path goes beyond the max print height." msgstr "Шлях G-коду виходить за максимально допустиму висоту друку." -msgid "A G-code path goes beyond the boundary of plate." -msgstr "Шлях G-коду виходить за межі зони друку." +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Шлях G-коду виходить за межі пластини." -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "Відображається лише редагований об'єкт." -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," -"і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Calibration step selection" msgstr "Вибір кроку калібрування" @@ -4450,11 +5040,8 @@ msgstr "Калібрування мікролідара" msgid "Bed leveling" msgstr "Вирівнювання столу" -msgid "Vibration compensation" -msgstr "Компенсація вібрації" - -msgid "Motor noise cancellation" -msgstr "Скасування шуму мотора" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "Програма калібрування" @@ -4493,10 +5080,10 @@ msgid "Liveview Retry" msgstr "Повторити перегляд у реальному часі" msgid "Resolution" -msgstr "Дозвіл нарізки" +msgstr "Роздільна здатність" msgid "Enable" -msgstr "Увімкнення" +msgstr "Увімкнути" msgid "Hostname or IP" msgstr "Ім'я хоста або IP-адреса" @@ -4507,24 +5094,21 @@ msgstr "Спеціальне джерело камери" msgid "Show \"Live Video\" guide page." msgstr "Показати \\Пряме відео\\ сторінку посібника." -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "Підключити принтер (локальна мережа)" msgid "Please input the printer access code:" msgstr "Введіть код доступу до принтера:" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"Ви можете знайти його в \\Установки > Мережа > Код підключення\"\n" -"на принтері, як показано на малюнку:" msgid "Invalid input." msgstr "Помилка введення." @@ -4544,9 +5128,15 @@ msgstr "Закриття програми під чвс зміни деяких msgid "Logging" msgstr "Ведення журналу" +msgid "Prepare" +msgstr "Підготовка" + msgid "Preview" msgstr "Попередній перегляд" +msgid "Device" +msgstr "Пристрій" + msgid "Multi-device" msgstr "Багато пристроїв" @@ -4563,29 +5153,32 @@ msgid "will be closed before creating a new model. Do you want to continue?" msgstr "буде закрито перед створенням нової моделі. Ви хочете продовжити?" msgid "Slice plate" -msgstr "Нарізати моделі" +msgstr "Нарізати пластину" msgid "Print plate" -msgstr "Друкована пластина" - -msgid "Slice all" -msgstr "Нарізати все" +msgstr "Друкувати пластину" msgid "Export G-code file" msgstr "Експорт файлу G-коду" +msgid "Send" +msgstr "Надіслати" + msgid "Export plate sliced file" -msgstr "Експорт файлу зрізів планшета" +msgstr "Експортувати файл нарізки пластини" msgid "Export all sliced file" -msgstr "Експортувати весь нарізаний файл" +msgstr "Експортувати файл нарізки всього" msgid "Print all" -msgstr "Роздрукувати все" +msgstr "Друкувати все" msgid "Send all" msgstr "Надіслати все" +msgid "Send to Multi-device" +msgstr "Відправити на багато пристроїв" + msgid "Keyboard Shortcuts" msgstr "Гарячі клавіші" @@ -4599,7 +5192,7 @@ msgid "Show Configuration Folder" msgstr "Показати папку конфігурації" msgid "Show Tip of the Day" -msgstr "Показати Раду дня" +msgstr "Показати пораду дня" msgid "Check for Update" msgstr "Перевірити оновлення" @@ -4620,19 +5213,15 @@ msgstr "Завантажити моделі" msgid "Default View" msgstr "За замовчуванням" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "Верх" - msgid "Top View" -msgstr "Вигляд зверху" +msgstr "Вид зверху" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" -msgstr "Ніз" +msgstr "Низ" msgid "Bottom View" -msgstr "Вигляд знизу" +msgstr "Вид знизу" msgid "Front" msgstr "Перед" @@ -4644,49 +5233,40 @@ msgid "Rear" msgstr "Зад" msgid "Rear View" -msgstr "Вигляд ззаду" - -msgid "Left" -msgstr "Ліво" +msgstr "Вид ззаду" msgid "Left View" -msgstr "Вигляд зліва" - -msgid "Right" -msgstr "Право" +msgstr "Вид зліва" msgid "Right View" -msgstr "Вигляд справа" +msgstr "Вид справа" msgid "Start a new window" msgstr "Почати нове вікно" msgid "New Project" -msgstr "Новий проект" +msgstr "Новий проєкт" msgid "Start a new project" -msgstr "Почати новий проект" +msgstr "Почати новий проєкт" msgid "Open a project file" -msgstr "Відкрийте файл проекту" +msgstr "Відкрити файл проєкту" -msgid "Recent projects" -msgstr "Недавні проекти" +msgid "Recent files" +msgstr "" msgid "Save Project" -msgstr "Зберегти проект" +msgstr "Зберегти проєкт" msgid "Save current project to file" -msgstr "Зберегти поточний проект у файл" +msgstr "Зберегти поточний проєкт у файл" msgid "Save Project as" -msgstr "Зберегти проект як" - -msgid "Shift+" -msgstr "Shift+" +msgstr "Зберегти проєкт як" msgid "Save current project as" -msgstr "Зберегти поточний проект як" +msgstr "Зберегти поточний проєкт як" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Імпорт 3MF/STL/STEP/SVG/OBJ/AMF" @@ -4718,14 +5298,14 @@ msgstr "Експортувати всі об’єкти як файли STL" msgid "Export Generic 3MF" msgstr "Експорт спільного 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "Експорт файлу 3mf без використання будь-яких 3mf-розширень" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Експорт файлу 3MF без використання будь-яких 3mf-розширень." msgid "Export current sliced file" msgstr "Експорт поточного нарізаного файлу" msgid "Export all plate sliced file" -msgstr "Експортувати весь файл нарізки" +msgstr "Експортувати файл нарізки всіх пластин" msgid "Export G-code" msgstr "Експорт G-коду" @@ -4733,8 +5313,11 @@ msgstr "Експорт G-коду" msgid "Export current plate as G-code" msgstr "Експортувати поточну пластину як G-код" +msgid "Export toolpaths as OBJ" +msgstr "Експортувати траєкторії як OBJ" + msgid "Export Preset Bundle" -msgstr "Експорт пакета пресетів" +msgstr "Експорт пакету профілів" msgid "Export current configuration to files" msgstr "Експорт поточної конфігурації до файлів" @@ -4773,7 +5356,7 @@ msgid "Deletes the current selection" msgstr "Видаляє поточний вибір" msgid "Delete all" -msgstr "Видаляє все" +msgstr "Видалити все" msgid "Deletes all objects" msgstr "Видаляє всі об'єкти" @@ -4784,6 +5367,12 @@ msgstr "Клонувати вибране" msgid "Clone copies of selections" msgstr "Клонувати копії вибраних об'єктів" +msgid "Duplicate Current Plate" +msgstr "Дублювати поточну пластину" + +msgid "Duplicate the current plate" +msgstr "Дублювати поточну пластину" + msgid "Select all" msgstr "Вибрати все" @@ -4794,24 +5383,32 @@ msgid "Deselect all" msgstr "Прибрати виділення з усього" msgid "Deselects all objects" -msgstr "Скасує вибір усіх об'єктів" +msgstr "Зняти виділення з усіх об'єктів" msgid "Use Perspective View" -msgstr "Використовуйте вигляд у перспективі" +msgstr "Використовувати вид у перспективі" msgid "Use Orthogonal View" -msgstr "Використовувати ортогональний вигляд" +msgstr "Використовувати ортогональний вид" + +msgid "Auto Perspective" +msgstr "" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" msgid "Show &G-code Window" msgstr "Показати вікно G-коду" -msgid "Show g-code window in Previce scene" -msgstr "Показати вікно g-коду у сцені попереднього перегляду" +msgid "Show G-code window in Preview scene." +msgstr "Показати вікно G-коду у сцені попереднього перегляду" msgid "Show 3D Navigator" msgstr "Показати 3D-навігатор" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "Показати 3D-навігатор у сцені підготовки та попереднього перегляду" msgid "Reset Window Layout" @@ -4823,18 +5420,27 @@ msgstr "Скидання до стандартного вигляду вікна msgid "Show &Labels" msgstr "Показати &Ярлики" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "Показати мітки об'єктів у 3D-сцені" msgid "Show &Overhang" msgstr "Показати &Виступ" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "Показати підсвічування виступу об'єкта у 3D сцені" +msgid "Show Selected Outline (beta)" +msgstr "Показати контур виділеного (бета)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Показувати контур навколо виділеного об'єкта у 3D сцені" + msgid "Preferences" msgstr "Налаштування" +msgid "View" +msgstr "Вид" + msgid "Help" msgstr "Допомога" @@ -4845,34 +5451,55 @@ msgid "Pass 1" msgstr "Прохід 1" msgid "Flow rate test - Pass 1" -msgstr "Тест витрати - Пройдено 1" +msgstr "Тест потоку - Прохід 1" msgid "Pass 2" msgstr "Прохід 2" msgid "Flow rate test - Pass 2" -msgstr "Тест витрати - Пройдено 2" +msgstr "Тест потоку - Прохід 2" + +msgid "YOLO (Recommended)" +msgstr "YOLO (Рекомендоване)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Калібрування потоку Orca YOLO, крок 0.01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (версія перфекціоніста)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Калібрування потоку Orca YOLO, крок 0.005" msgid "Flow rate" -msgstr "Швидкість потоку" +msgstr "Потік" msgid "Pressure advance" -msgstr "Випередження тиску PA" +msgstr "Випередження тиску (PA)" msgid "Retraction test" msgstr "Тест на втягування" -msgid "Orca Tolerance Test" -msgstr "Тест на допуски ORCA" - msgid "Max flowrate" msgstr "Максимальний потік" -msgid "VFA" -msgstr "VFA" +msgid "Cornering" +msgstr "" -msgid "More..." -msgstr "Більше..." +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "" + +msgid "Input Shaping Damping/zeta factor" +msgstr "" + +msgid "Input Shaping" +msgstr "" + +msgid "VFA" +msgstr "Вертикальні дрібні артефакти (VFA)" msgid "Tutorial" msgstr "Посібник" @@ -4880,9 +5507,6 @@ msgstr "Посібник" msgid "Calibration help" msgstr "Довідка з калібрування" -msgid "More calibrations" -msgstr "Більше калібрування" - msgid "&Open G-code" msgstr "&Відкрити G-код" @@ -4893,14 +5517,11 @@ msgid "Re&load from Disk" msgstr "Перезавантажити з диска" msgid "Reload the plater from disk" -msgstr "Перезавантажити планшет із диска" +msgstr "Перезавантажити пластину з диска" msgid "Export &Toolpaths as OBJ" msgstr "Експорт траєкторій як OBJ" -msgid "Export toolpaths as OBJ" -msgstr "Експортувати траєкторії як OBJ" - msgid "Open &Slicer" msgstr "Відкрити &студію" @@ -4924,16 +5545,19 @@ msgid "&Help" msgstr "&Допомога" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "Існує файл із таким же ім'ям: %s, ви хочете перевизначити його." +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "Існує файл із таким же ім'ям: %s, ви хочете перезаписати його?" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "Існує конфігурація з таким же ім'ям: %s, ви хочете перевизначити її." +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Існує конфігурація з таким же ім'ям: %s, хочете Її перезаписати?" msgid "Overwrite file" msgstr "Перезаписати файл" +msgid "Overwrite config" +msgstr "Перезаписати конфігурацію" + msgid "Yes to All" msgstr "Так для всіх" @@ -4955,6 +5579,7 @@ msgstr[1] "" msgstr[2] "" "Експортовано конфігураційні елементи: %d. (Тільки несистемні конфігураційні " "елементи)" +msgstr[3] "" msgid "Export result" msgstr "Експорт результату" @@ -4975,6 +5600,7 @@ msgstr[1] "" msgstr[2] "" "Імпортовано конфігураційних елементів: %d. (Тільки несистемні та сумісні " "конфігураційні елементи)" +msgstr[3] "" msgid "" "\n" @@ -4995,16 +5621,16 @@ msgid "The project is no longer available." msgstr "Проект недоступний." msgid "Filament Settings" -msgstr "Налаштування філаменту" +msgstr "Налаштування Філаменту" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"Ви хочете синхронізувати свої особисті дані з Bambu Cloud? \n" +"Ви хочете синхронізувати свої особисті дані з Bambu Cloud?\n" "Він містить таку інформацію:\n" "1. Передустановки процесу\n" "2. Передустановки філаменту\n" @@ -5038,7 +5664,7 @@ msgstr "" msgid "Printer camera is malfunctioning." msgstr "Камера принтера несправна." -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "" "Виникла проблема. Будь ласка, оновіть прошивку принтера і спробуйте знову." @@ -5059,7 +5685,7 @@ msgstr "" "Підключення не вдалося. Будь ласка, перевірте мережу та спробуйте ще раз" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "" "Будь ласка, перевірте мережу та спробуйте ще раз. Якщо проблема " @@ -5068,8 +5694,8 @@ msgstr "" msgid "The printer has been logged out and cannot connect." msgstr "Принтер був вийшов із системи та не може підключитися." -msgid "Stopped." -msgstr "Зупинено." +msgid "Video Stopped." +msgstr "Відео зупинено." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "" @@ -5109,6 +5735,9 @@ msgstr "Інформація" msgid "Playing..." msgstr "Гра..." +msgid "Loading..." +msgstr "Завантаження..." + msgid "Year" msgstr "Рік" @@ -5127,6 +5756,9 @@ msgstr "Згрупуйте файли по місяцях, спочатку не msgid "Show all files, recent first." msgstr "Показати всі файли спочатку останні." +msgid "Timelapse" +msgstr "Покадрова зйомка" + msgid "Switch to timelapse files." msgstr "Перехід до файлів уповільненої зйомки." @@ -5136,8 +5768,9 @@ msgstr "Відео" msgid "Switch to video files." msgstr "Перехід до відеофайлів." -msgid "Switch to 3mf model files." -msgstr "Переключитися на файли моделей 3mf." +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Переключитися на файли моделей 3MF." msgid "Delete selected files from printer." msgstr "Видалити вибрані файли з принтера." @@ -5163,41 +5796,25 @@ msgstr "Перезавантажте список файлів з принтер msgid "No printers." msgstr "Ніяких принтерів." -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "Помилка підключення [%d]!" - msgid "Loading file list..." msgstr "Завантаження списку файлів..." msgid "No files" -msgstr "No files" +msgstr "Немає файлів" msgid "Load failed" msgstr "Не вдалося завантажити" -msgid "Initialize failed (Device connection not ready)!" -msgstr "Ініціалізація не вдалася (З'єднання пристрою не готове)!" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -"Перегляд файлів на SD-картці не підтримується в поточній версії прошивки. " -"Будь ласка, оновіть прошивку принтера." - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "Помилка ініціалізації (Сховище недоступне, вставте SD-карту)!" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Помилка підключення LAN (Не вдалося переглянути sd-карту)" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "Перегляд файлів на SD-картці не підтримується в режимі лише LAN." - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "Помилка ініціалізації (%s)!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5212,6 +5829,7 @@ msgstr[1] "" msgstr[2] "" "Ви збираєтеся видалити %u файлів із принтера. Ви впевнені, що хочете це " "зробити?" +msgstr[3] "" msgid "Delete files" msgstr "Видалити файли" @@ -5223,7 +5841,7 @@ msgstr "Ви хочете видалити файл '%s' з принтера?" msgid "Delete file" msgstr "Видалити файл" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "Отримання інформації про модель ..." msgid "Failed to fetch model information from printer." @@ -5233,8 +5851,8 @@ msgid "Failed to parse model information." msgstr "Не вдалося розібрати інформацію про модель." msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" "Файл .gcode.3mf не містить даних G-коду. Будь ласка, розріжте його за " "допомогою Snapmaker Orca і експортуйте новий файл .gcode.3mf." @@ -5252,7 +5870,7 @@ msgstr "" "Заголовок: %s\n" msgid "Download waiting..." -msgstr "Чекання завантаження..." +msgstr "Очікування завантаження..." msgid "Play" msgstr "Відтворити" @@ -5267,6 +5885,9 @@ msgstr "Завантаження завершено" msgid "Downloading %d%%..." msgstr "Завантаження %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." @@ -5274,6 +5895,9 @@ msgstr "" "Перепідключення принтера. Операцію не можна завершити негайно, спробуйте ще " "раз пізніше." +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "Файл не існує." @@ -5283,13 +5907,47 @@ msgstr "Помилка контрольної суми файлу. Будь ла msgid "Not supported on the current printer version." msgstr "Не підтримується на поточній версії принтера." -msgid "Storage unavailable, insert SD card." -msgstr "Зберігання недоступне, вставте SD-карту." +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "Код помилки: %d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "Швидкість:" @@ -5329,11 +5987,84 @@ msgstr "Інвертувати вісь нахилу" msgid "Invert Roll axis" msgstr "Інвертувати вісь Roll" +msgid "(LAN)" +msgstr "" + +msgid "Search" +msgstr "Пошук" + +msgid "My Device" +msgstr "Мій пристрій" + +msgid "Other Device" +msgstr "Інші пристрої" + +msgid "Online" +msgstr "У мережі" + +msgid "Input access code" +msgstr "Введіть код доступу" + +msgid "Can't find my devices?" +msgstr "Не можу знайти пристрої?" + +msgid "Log out successful." +msgstr "Вийти успішно." + +msgid "Offline" +msgstr "Не в мережі" + +msgid "Busy" +msgstr "Зайнятий" + +msgid "Modifying the device name" +msgstr "Зміна імені пристрою" + +msgid "Name is invalid;" +msgstr "Некоректне ім'я;" + +msgid "illegal characters:" +msgstr "неприпустимі символи:" + +msgid "illegal suffix:" +msgstr "неприпустимий суфікс:" + +msgid "The name is not allowed to be empty." +msgstr "Ім'я не може бути порожнім." + +msgid "The name is not allowed to start with space character." +msgstr "Ім'я не може починатися з пробілу." + +msgid "The name is not allowed to end with space character." +msgstr "Ім'я не може закінчуватися пробілом." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Прив’язати за допомогою Пін-коду" + +msgid "Bind with Access Code" +msgstr "Прив’язати з кодом доступу" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "Хід друку" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Стоп" msgid "Layer: N/A" msgstr "Шар: немає даних" @@ -5362,8 +6093,8 @@ msgstr "Оцінити" msgid "Camera" msgstr "Камера" -msgid "SD Card" -msgstr "SD картка" +msgid "Storage" +msgstr "" msgid "Camera Setting" msgstr "Налаштування камери" @@ -5380,35 +6111,41 @@ msgstr "Частини принтера" msgid "Print Options" msgstr "Параметри друку" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "Лампа" -msgid "Aux" -msgstr "Aux" - -msgid "Cham" -msgstr "Камера" - msgid "Bed" msgstr "Стіл" msgid "Debug Info" msgstr "Налагоджувальна інформація" -msgid "No SD Card" -msgstr "Немає картки SD" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD-картка не в порядку" +msgid "No Storage" +msgstr "" + +msgid "Storage Abnormal" +msgstr "" msgid "Cancel print" msgstr "Скасувати друк" -msgid "Are you sure you want to cancel this print?" -msgstr "Ви впевнені, що хочете скасувати цей друк?" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Принтер зайнятий іншим завданням друку." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "Завантаження..." @@ -5428,18 +6165,17 @@ msgstr "Шар: %s" msgid "Layer: %d/%d" msgstr "Шар: %d/%d" +#, fuzzy msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "" "Будь ласка, нагрійте насадку до понад 170 градусів перед завантаженням або " "вивантаженням філаменту." -msgid "Still unload" -msgstr "Ще розвантажити" - -msgid "Still load" -msgstr "Ще завантажити" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "Будь ласка, виберіть слот AMS перед калібруванням" @@ -5466,8 +6202,19 @@ msgstr "Спортивний" msgid "Ludicrous" msgstr "Безглуздий" -msgid "Can't start this without SD card." -msgstr "Не можу запустити це без SD-карти." +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "Оцінити профіль друку" @@ -5490,13 +6237,10 @@ msgstr "Підтвердити" msgid "Please click on the star first." msgstr "Будь ласка, спочатку клацніть на зірку." -msgid "InFo" -msgstr "Інформація" - msgid "Get oss config failed." msgstr "Не вдалося отримати конфігурацію OSS." -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "Завантажити фотографії" msgid "Number of images successfully uploaded" @@ -5511,7 +6255,7 @@ msgstr " Помилка при спробі завантажити конфіг msgid " No corresponding storage bucket\n" msgstr " Відсутній відповідний сховищний контейнер\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr " Не може бути відкрито\n" msgid "" @@ -5538,7 +6282,7 @@ msgid "obtaining instance_id failed\n" msgstr "помилка отримання instance_id\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5553,7 +6297,7 @@ msgstr "текст помилки: " msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5561,7 +6305,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "" "Деякі з ваших зображень не вдалося завантажити. Бажаєте перейти на веб-" "сторінку для оцінки?" @@ -5571,7 +6315,7 @@ msgstr "Ви можете вибрати до 16 зображень." msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "Для того щоб поставити позитивний рейтинг (4 або 5 зірок), потрібно \n" "мати принаймні один успішний запис про друк з цим профілем друку." @@ -5579,12 +6323,22 @@ msgstr "" msgid "Status" msgstr "Статус" +msgctxt "Firmware" msgid "Update" -msgstr "Оновлення" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "Більше не показувати" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s помилка" @@ -5612,11 +6366,13 @@ msgstr "%s інформація" msgid "Skip" msgstr "Пропустити" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "Нова версія 3mf" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "" "Версія 3mf-файлу знаходиться в стадії бета-тестування і є новішою за поточну " @@ -5629,12 +6385,14 @@ msgstr "" msgid "Download Beta Version" msgstr "Завантажити бета-версію" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." -msgstr "Версія файлу 3mf новіша, ніж поточна версія Snapmaker Orca." +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "Версія файлу 3MF новіша, ніж поточна версія Snapmaker Orca." -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "" -"Оновлення вашого Snapmaker Orca може увімкнути всю функціональність у файлі 3mf." +"Оновлення вашого Snapmaker Orca може увімкнути всю функціональність у файлі 3MF." msgid "Current Version: " msgstr "Поточна версія: " @@ -5642,9 +6400,36 @@ msgstr "Поточна версія: " msgid "Latest Version: " msgstr "Остання версія: " +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "Наразі не потрібно" +msgid "Server Exception" +msgstr "Помилка сервера" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Сервер не може відповісти. Будь ласка, натисніть на посилання нижче, щоб " +"перевірити стан сервера." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Якщо сервер перебуває в стані збою, ви можете тимчасово використовувати " +"офлайн-друк або друк через локальну мережу." + +msgid "How to use LAN only mode" +msgstr "Як використовувати режим лише локальної мережі" + +msgid "Don't show this dialog again" +msgstr "Більше не показувати це діалогове вікно" + msgid "3D Mouse disconnected." msgstr "3D-миша відключена." @@ -5699,6 +6484,7 @@ msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d Об'єкт має опори користувача." msgstr[1] "%1$d Об'єкти мають опори користувача." msgstr[2] "%1$d Об'єкти мають опори користувача." +msgstr[3] "" #, c-format, boost-format msgid "%1$d Object has color painting." @@ -5706,13 +6492,23 @@ msgid_plural "%1$d Objects have color painting." msgstr[0] "%1$d Об'єкт має кольорове забарвлення." msgstr[1] "%1$d Об'єкти мають кольорове забарвлення." msgstr[2] "%1$d Об'єкти мають кольорове забарвлення." +msgstr[3] "" #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d завантажено як частину обрізаного об'єкта." msgstr[1] "%1$d завантажено як частини обрізаних об'єктів" msgstr[2] "%1$d завантажено як частини обрізаних об'єктів" +msgstr[3] "" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" +msgstr[1] "" +msgstr[2] "" +msgstr[3] "" msgid "ERROR" msgstr "ПОМИЛКА" @@ -5735,7 +6531,7 @@ msgstr "Помилка:" msgid "Warning:" msgstr "Попередження:" -msgid "Export successfully." +msgid "Exported successfully" msgstr "Експорт успішно." msgid "Model file downloaded." @@ -5753,17 +6549,18 @@ msgstr " Натисніть тут, щоб встановити його." msgid "WARNING:" msgstr "ПОПЕРЕДЖЕННЯ:" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "Вашій моделі потрібна підтримка! Увімкніть допоміжний матеріал." -msgid "Gcode path overlap" -msgstr "Перекриття шляху Gcode" +#, fuzzy +msgid "G-code path overlap" +msgstr "Перекриття шляху G-code" msgid "Support painting" msgstr "Підтримка малювання" msgid "Color painting" -msgstr "Кольорове малювання" +msgstr "Розфарбовування кольорами" msgid "Cut connectors" msgstr "Вирізати з'єднувачі" @@ -5805,21 +6602,58 @@ msgctxt "Layers" msgid "Bottom" msgstr "Низ" -msgid "Enable AI monitoring of printing" -msgstr "Увімкнути ШІ-моніторинг друку" - -msgid "Sensitivity of pausing is" -msgstr "Чутливість паузи" - msgid "Enable detection of build plate position" -msgstr "Увімкнути визначення положення робочого столу" +msgstr "Увімкнути визначення положення робочої пластини" msgid "" "The localization tag of build plate is detected, and printing is paused if " "the tag is not in predefined range." msgstr "" -"Виявлено тег локалізації робочої пластини, і друк припиняється, якщо\n" -"тег не знаходиться в певному діапазоні." +"Виявлено тег локалізації робочої пластини, і друк припиняється, якщо тег не " +"знаходиться в певному діапазоні." + +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Увімкнути ШІ-моніторинг друку" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Виявлення згортання сопла" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" msgid "First Layer Inspection" msgstr "Перевірка першого шару" @@ -5827,15 +6661,29 @@ msgstr "Перевірка першого шару" msgid "Auto-recovery from step loss" msgstr "Автоматичне відновлення після втрати кроку" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "Дозволити звук підказки" msgid "Filament Tangle Detect" msgstr "Виявлення заплутування філаменту" -msgid "Nozzle Clumping Detection" -msgstr "Виявлення згортання сопла" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "" "Перевірте, чи сопло не затверділо від філаменту або інших чужорідних " @@ -5844,18 +6692,32 @@ msgstr "" msgid "Nozzle Type" msgstr "Тип насадки" -msgid "Stainless Steel" -msgstr "Нержавіюча сталь" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "Закалена сталь" -#, c-format, boost-format -msgid "%.1f" -msgstr "%.1f" +msgid "Stainless Steel" +msgstr "Нержавіюча сталь" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" msgid "Global" -msgstr "Глобальний" +msgstr "Глобальні" msgid "Objects" msgstr "Об'єкти" @@ -5864,16 +6726,16 @@ msgid "Advance" msgstr "Профі" msgid "Compare presets" -msgstr "Порівняти пресети" +msgstr "Порівняти профілі" msgid "View all object's settings" msgstr "Переглянути всі налаштування об'єкта" msgid "Material settings" -msgstr "" +msgstr "Налаштування матеріалу" msgid "Remove current plate (if not last one)" -msgstr "Видалити поточну пластину (якщо вона не є остання)" +msgstr "Видалити поточну пластину (якщо вона не остання)" msgid "Auto orient objects on current plate" msgstr "Автоматичне орієнтування об'єктів на поточній пластині" @@ -5885,17 +6747,45 @@ msgid "Unlock current plate" msgstr "Розблокувати поточну пластину" msgid "Lock current plate" -msgstr "Блокування поточної пластини" +msgstr "Блокувати поточну пластину" + +msgid "Filament grouping" +msgstr "" msgid "Edit current plate name" -msgstr "Редагувати поточну назву пластини" +msgstr "Редагувати назву поточної пластини" msgid "Move plate to the front" -msgstr "" +msgstr "Перемістити пластину на перед" msgid "Customize current plate" msgstr "Налаштувати поточну пластину" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr " Пластина %1%:" @@ -5922,19 +6812,72 @@ msgid "Estimated time" msgstr "Розрахунковий час" msgid "Filament changes" -msgstr "Зміни нитки" +msgstr "Зміни філаменту" + +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" msgid "Click to edit preset" -msgstr "Натисніть, щоб змінити попереднє встановлення" +msgstr "Натисніть, щоб редагувати профіль" msgid "Connection" msgstr "Зв'язок" -msgid "Bed type" -msgstr "Тип столу" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" -msgstr "Промивні обсяги" +msgstr "Об'єми промивки" msgid "Add one filament" msgstr "Додайте один філамент" @@ -5946,54 +6889,36 @@ msgid "Synchronize filament list from AMS" msgstr "Синхронізувати список ниток з AMS" msgid "Set filaments to use" -msgstr "Встановіть нитки для використання" +msgstr "Встановити філаменти для використання" msgid "Search plate, object and part." -msgstr "Пошук плити, об’єкта і деталі." +msgstr "Пошук пластини, об’єкта і деталі." msgid "Pellets" +msgstr "Гранули" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "" -"Немає ниток AMS. Виберіть принтер на сторінці «Пристрій», щоб завантажити " -"інформацію AMS." +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Немає сумісних філаментів, а синхронізація не виконується." msgid "Sync filaments with AMS" msgstr "Синхронізація ниток з AMS" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"Синхронізація ниток з AMS видаляє всі поточні вибрані пресети ниток і\n" -"Кольори. Ви хочете продовжувати?" msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"Синхронізацію вже робив, синхронізувати лише зміни абопересинхронізувати\n" -"Усе?" - -msgid "Sync" -msgstr "Синхронізувати" - -msgid "Resync" -msgstr "Повторна синхронізація" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "Немає сумісних філаментів, а синхронізація не виконується." - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." -msgstr "" -"Є кілька невідомих ниток, зіставлених із загальною передустановкою.Будь " -"ласка, оновіть Snapmaker Orca або перезапустіть Snapmaker Orca, щоб перевірити, чи " -"є оновлення для системи пресети." #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6001,15 +6926,15 @@ msgstr "Ви хочете зберегти зміни в \\%1%\\?" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "" "Успішно змонтовано. Тепер пристрій %s(%s) можна безпечно видалити з " "комп'ютер." #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "Помилка виймання пристрою %s(%s)." +msgid "Ejecting of device %s (%s) has failed." +msgstr "" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "Виявлено попередній незбережений проект, відновити його?" @@ -6043,66 +6968,93 @@ msgstr "" "Включення традиційної фотографії таймлапсу може призвести до дефектів на " "поверхні. Рекомендується перейти в режим згладжування." +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "Розгорнути бічну панель" msgid "Collapse sidebar" msgstr "Згорнути бічну панель" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "Завантаження файлу: %s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "3mf не від Snapmaker Orca, завантажуйте лише дані геометрії." -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "Завантажити 3mf" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" -msgstr "Версія 3mf %s новіша, ніж версія %s %s, знайдено наступні ключі:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "Версія 3MF %s новіша, ніж версія %s %s, знайдено наступні ключі:" msgid "You'd better upgrade your software.\n" msgstr "Вам краще оновити програмне забезпечення.\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "" -"Версія 3mf %s новіша, ніж версія %s %s, запропонуйте оновити програмне " +"Версія 3MF %s новіша, ніж версія %s %s, запропонуйте оновити програмне " "забезпечення." -msgid "Invalid values found in the 3mf:" -msgstr "У 3mf знайдено неприпустимі значення:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "У 3MF знайдено неприпустимі значення:" msgid "Please correct them in the param tabs" msgstr "Будь ласка, виправте їх у вкладках параметрів" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "" -"У файлі 3mf знаходяться наступні змінені G-коди в налаштуваннях філаменту " +"У файлі 3MF знаходяться наступні змінені G-коди в налаштуваннях філаменту " "або принтера:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "" "Будь ласка, підтвердьте, що ці змінені G-коди безпечні і не призведуть до " "пошкодження пристрою!" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "Змінені G-коди" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "" -"У файлі 3mf містяться наступні налаштовані параметри філаменту або принтера:" +"У файлі 3MF містяться наступні налаштовані параметри філаменту або принтера:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "" "Будь ласка, підтвердьте, що G-коди в цих налаштованих параметрах безпечні і " @@ -6111,7 +7063,8 @@ msgstr "" msgid "Customized Preset" msgstr "Налаштований параметр" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "Ім'я компонентів всередині крокового файлу не у форматі UTF8!" msgid "The name may show garbage characters!" @@ -6160,12 +7113,22 @@ msgstr "Завантажити ці файли як єдиний об'єкт з msgid "Object with multiple parts was detected" msgstr "Виявлено об'єкт, що складається з кількох частин" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "Файл не містить геометричних даних." msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "" "Ваш об'єкт здається занадто великим. Ви хочете зменшити його, щоб він " "відповідав розміру?\n" @@ -6230,6 +7193,34 @@ msgstr "Виберіть новий файл" msgid "File for the replace wasn't selected" msgstr "Не вибраний файл для заміни" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "Будь ласка, виберіть файл" @@ -6274,18 +7265,29 @@ msgstr "" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Режим тільки попереднього перегляду:\n" "Завантажений файл містить лише gcode, не вдається увійти на сторінку " "підготовки" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Ви можете зберегти змінені пресети у новому проекті або відмовитися від них" msgid "Creating a new project" -msgstr "Створення нового проекту" +msgstr "Створення нового проєкту" msgid "Load project" msgstr "Завантажити проект" @@ -6305,13 +7307,13 @@ msgstr "Зберегти проект" msgid "Importing Model" msgstr "Імпорт моделі" -msgid "prepare 3mf file..." -msgstr "підготувати файл 3mf..." +msgid "prepare 3MF file..." +msgstr "підготувати файл 3MF..." msgid "Download failed, unknown file format." msgstr "Не вдалося завантажити, невідомий формат файлу." -msgid "downloading project ..." +msgid "downloading project..." msgstr "завантажую проект..." msgid "Download failed, File size exception." @@ -6328,13 +7330,24 @@ msgstr "" "Не вдалося імпортувати файл до Snapmaker Orca. Завантажте файл і імпортуйте " "його вручну." +msgid "INFO:" +msgstr "" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" + msgid "Import SLA archive" msgstr "Імпорт SLА-архіву" msgid "The selected file" msgstr "Вибраний файл" -msgid "does not contain valid gcode." +#, fuzzy +msgid "does not contain valid G-code." msgstr "не містить дійсний gcode." msgid "Error occurs while loading G-code file" @@ -6363,7 +7376,7 @@ msgid "Please select an action" msgstr "Виберіть дію" msgid "Open as project" -msgstr "Відкрити як проект" +msgstr "Відкрити як проєкт" msgid "Import geometry only" msgstr "Імпортувати лише геометрію" @@ -6374,10 +7387,10 @@ msgstr "Водночас можна відкрити лише один файл msgid "G-code loading" msgstr "Завантаження G-коду" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "Файли G-коду не можна завантажувати разом із моделями!" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "Неможливо додати моделі у режимі попереднього перегляду!" msgid "All objects will be removed, continue?" @@ -6415,6 +7428,12 @@ msgid "" msgstr "" "Файл %s надіслано до пам'яті принтера та доступний для перегляду на принтері." +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -6442,33 +7461,26 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"Ви впевнені, що хочете зберегти оригінальні SVG-файли з їхніми локальними " -"шляхами у 3MF-файл?\n" -"Якщо ви натиснете \"НІ\", всі SVG-файли у проекті будуть недоступні для " -"редагування." - -msgid "Private protection" -msgstr "Приватний захист" +"Не можливо виконати булеву операцію на сітках моделі. Тільки позитивні " +"частини будуть експортовані." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" -msgstr "Чи готовий принтер? Чи є стіл для друку на місці, чистий і порожній?" +msgstr "" +"Чи готовий принтер? Чи на місці поверхня для друку, вона чиста і порожня?" msgid "Upload and Print" msgstr "Завантажити і друкувати" +msgid "Abnormal print file data. Please slice again" +msgstr "Неправильні дані файлу друку. Будь ласка, наріжте знову" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" "Друк за об'єктом: \n" -"Рекомендовано використовувати автоматичне розташування, щоб уникнути колізій " -"під час друку." +"Рекомендовано використовувати автоматичне впорядкування, щоб уникнути " +"колізій під час друку." msgid "Send G-code" msgstr "Надіслати G-код" @@ -6483,8 +7495,33 @@ msgstr "" msgid "Optimize Rotation" msgstr "Оптимізація повороту" -msgid "Invalid number" -msgstr "Неправильний номер" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "Параметри планшета" @@ -6525,9 +7562,6 @@ msgstr "Об'єм: %1% мм³\n" msgid "Triangles: %1%\n" msgstr "Трикутники: %1%\n" -msgid "Tips:" -msgstr "Поради:" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." @@ -6538,13 +7572,36 @@ msgstr "" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"Пластина% d: %s не рекомендується використовувати для друку на нитках " -"%s(%s). Якщо ви все ще хочете зробити цей друк, будь ласка, встановіть " -"температуру шару цієї нитки до ненульового." msgid "Switching the language requires application restart.\n" msgstr "Для перемикання мови потрібно перезапустити програму.\n" @@ -6556,44 +7613,11 @@ msgid "Language selection" msgstr "Вибір мови" msgid "Switching application language while some presets are modified." -msgstr "Переключення мови програми при зміні деяких пресетів." +msgstr "Зміна мови програми при зміні деяких профілів." msgid "Changing application language" msgstr "Зміна мови програми" -msgid "Changing the region will log out your account.\n" -msgstr "Зміна регіону призведе до виходу з вашого облікового запису.\n" - -msgid "Region selection" -msgstr "Вибір регіону" - -msgid "Second" -msgstr "Секунд" - -msgid "Browse" -msgstr "Переглядати" - -msgid "Choose Download Directory" -msgstr "Виберіть каталог завантаження" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "Загальні налаштування" - msgid "Asia-Pacific" msgstr "Азіатсько-Тихоокеанський регіон" @@ -6609,25 +7633,56 @@ msgstr "Північна Америка" msgid "Others" msgstr "Інші" -msgid "Login Region" -msgstr "Регіон входу" +msgid "Changing the region will log out your account.\n" +msgstr "Зміна регіону призведе до виходу з вашого облікового запису.\n" -msgid "Stealth Mode" -msgstr "Прихований режим" +msgid "Region selection" +msgstr "Вибір регіону" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Період резервного копіювання в секундах." + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -"Це зупиняє передачу даних до хмарних сервісів Bambu. Користувачі, які не " -"користуються машинами BBL або використовують лише режим локальної мережі, " -"можуть безпечно ввімкнути цю функцію." -msgid "Enable network plugin" -msgstr "Увімкнути мережевий плагін" +msgid "Browse" +msgstr "Переглядати" -msgid "Check for stable updates only" -msgstr "Перевіряти лише стабільні оновлення" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Виберіть каталог завантаження" + +msgid "Associate" +msgstr "Ассоціювати" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "з Snapmaker Orca так що Orca могла відкривати моделі з" + +msgid "Current Association: " +msgstr "Поточна асоціація: " + +msgid "Current Instance" +msgstr "Поточна Інсталяція" + +msgid "Current Instance Path: " +msgstr "Шлях Поточної Інсталяції: " + +msgid "General" +msgstr "Загальні" msgid "Metric" msgstr "Метрика" @@ -6636,7 +7691,19 @@ msgid "Imperial" msgstr "Імперський" msgid "Units" -msgstr "Одиниці" +msgstr "Одиниці виміру" + +msgid "Home" +msgstr "Домашня" + +msgid "Default page" +msgstr "Початкова сторінка" + +msgid "Set the page opened on startup." +msgstr "Задати сторінку, яка відкривається при запуску." + +msgid "Enable dark mode" +msgstr "Увімкнути темний режим" msgid "Allow only one Snapmaker Orca instance" msgstr "Дозволити лише один екземпляр Snapmaker Orca" @@ -6660,14 +7727,112 @@ msgstr "" "інший екземпляр того ж самого Snapmaker Orca, цей екземпляр буде повторно " "активовано замість нього." -msgid "Home" -msgstr "Домівка" +msgid "Show splash screen" +msgstr "Показувати заставку" -msgid "Default Page" -msgstr "Сторінка за замовчуванням" +msgid "Show the splash screen during startup." +msgstr "Показувати заставку під час запуску." -msgid "Set the page opened on startup." -msgstr "Задати сторінку, яка відкривається при запуску." +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Завантажити все" + +msgid "Ask When Relevant" +msgstr "Запитувати коли доречно" + +msgid "Always Ask" +msgstr "Запитувати завжди" + +msgid "Load Geometry Only" +msgstr "Завантажити Тільки Геометрію" + +msgid "Load behaviour" +msgstr "Поведінка завантаження" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "" +"Чи повинні бути завантажені налаштування принтера/філаменту/процесу при " +"відкритті файлу .3mf?" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "Немає попереджень при завантаженні файлу 3MF із зміненими G-кодами" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" + +msgid "Auto backup" +msgstr "Автобекап" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "" +"Періодично робіть резервну копію вашого проекту для відновлення після " +"випадкового збою." + +msgid "Preset" +msgstr "Шаблон" + +msgid "Remember printer configuration" +msgstr "Запам'ятати конфігурацію принтера" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Якщо увімкнено, Orca запам'ятовує та автоматично перемикає конфігурацію " +"нитки/процесу для кожного принтера." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "Керування кількома пристроями" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"З цією опцією ввімкненою, ви можете відправляти завдання на кілька пристроїв " +"одночасно та керувати декількома пристроями." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Всі" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Автоматично впорядкувати пластину після копіювання" msgid "Touchpad" msgstr "Тачпад" @@ -6684,14 +7849,20 @@ msgstr "" "За замовчуванням: ЛКМ+рух для обертання, ПКМ/СКМ+рух для панорамування.\n" "Сенсорна панель: Alt+рух для обертання, Shift+рух для панорамування." +msgid "Orbit speed multiplier" +msgstr "" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "" + msgid "Zoom to mouse position" -msgstr "Наблизити до положення миші" +msgstr "Масштабувати до положення миші" msgid "" "Zoom in towards the mouse pointer's position in the 3D view, rather than the " "2D window center." msgstr "" -"Наблизьтеся до положення покажчика миші у 3D-виді, а не до центру 2D вікна." +"Масштабувати до положення курсору миші у 3D-виді, а не до центру 2D вікна." msgid "Use free camera" msgstr "Використовувати вільну камеру" @@ -6701,106 +7872,119 @@ msgstr "" "Якщо увімкнено, використовуватиметься вільна камера. Якщо вимкнено, " "використовуватиметься камера з обмеженими можливостями." +msgid "Swap pan and rotate mouse buttons" +msgstr "Поміняти кнопки миші для панорамування й обертання" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Якщо ввімкнено, змінює місцями функції панорамування та обертання між лівою " +"та правою кнопками миші." + msgid "Reverse mouse zoom" -msgstr "Реверсний зум миші" +msgstr "Зворотне масштабування мишкою" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "" "Якщо увімкнено, змінює напрямок масштабування за допомогою коліщатка миші." -msgid "Show splash screen" -msgstr "Показувати заставку" - -msgid "Show the splash screen during startup." -msgstr "Показувати заставку під час запуску." - -msgid "Show \"Tip of the day\" notification after start" -msgstr "Показувати повідомлення \"Рада дня\" після запуску" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "Якщо увімкнено, під час запуску відображаються корисні підказки." - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Clear my choice on..." msgstr "" -"Змивання обсягів: авто-перераховується кожного разу, коли змінюється колір." -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Unsaved projects" +msgstr "" + +msgid "Clear my choice on the unsaved projects." +msgstr "Очистити мій вибір для незбережених проектів." + +msgid "Unsaved presets" +msgstr "" + +msgid "Clear my choice on the unsaved presets." +msgstr "Очистити мій вибір для незбережених профілів." + +msgid "Synchronizing printer preset" msgstr "" -"Якщо увімкнено, авто-розраховувння кожного разу, коли змінюється колір." msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." +"Clear my choice for synchronizing printer preset after loading the file." msgstr "" -"Об’єми промивання: автоматично обчислювати кожного разу при зміні філаменту." -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" -"Якщо ввімкнено, автоматично обчислювати кожного разу, коли змінюється " -"філамент" +msgid "Login region" +msgstr "Регіон входу" -msgid "Remember printer configuration" -msgstr "Запам'ятати конфігурацію принтера" +msgid "Stealth mode" +msgstr "Прихований режим" msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." msgstr "" -"Якщо увімкнено, Orca запам'ятовує та автоматично перемикає конфігурацію " -"нитки/процесу для кожного принтера." +"Це зупиняє передачу даних до хмарних сервісів Bambu. Користувачі, які не " +"користуються машинами BBL або використовують лише режим локальної мережі, " +"можуть безпечно ввімкнути цю функцію." -msgid "Multi-device Management(Take effect after restarting Orca)." +msgid "Network test" +msgstr "Тест мережі" + +msgid "Test" +msgstr "Тест" + +msgid "Update & sync" msgstr "" -"Керування кількома пристроями (набуває чинності після перезапуску Orca)." -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." +msgid "Check for stable updates only" +msgstr "Перевіряти лише стабільні оновлення" + +msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "" -"З цією опцією ввімкненою, ви можете відправляти завдання на кілька пристроїв " -"одночасно та керувати декількома пристроями." - -msgid "Network" -msgstr "Мережа" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "" -"Автоматична синхронізація користувацьких пресетів (принтер/філамент/процес)" - -msgid "User Sync" -msgstr "Синхронізація користувачів" +"Автоматична синхронізація користувацьких профілів (принтер/філамент/процес)" msgid "Update built-in Presets automatically." msgstr "Оновлюйте вбудовані пресети автоматично." -msgid "System Sync" -msgstr "Синхронізація системи" +msgid "Network plugin" +msgstr "" -msgid "Clear my choice on the unsaved presets." -msgstr "Очистіть мій вибір від незахищених пресетів." +msgid "Enable network plugin" +msgstr "Увімкнути мережевий плагін" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "" msgid "Associate files to Snapmaker Orca" msgstr "Асоціювати файли з Snapmaker Orca" -msgid "Associate .3mf files to Snapmaker Orca" +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" msgstr "Асоціювати файли .3mf з Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "" "Якщо включено, встановлює Snapmaker Orca як програму за замовчуваннямдля " "відкриття файлів .3mf" -msgid "Associate .stl files to Snapmaker Orca" +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" msgstr "Асоціювати файли .stl з Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "" "Якщо включено, встановлює Snapmaker Orca як програму за замовчуваннямдля " "відкриття файлів .stl" -msgid "Associate .step/.stp files to Snapmaker Orca" +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" msgstr "Асоціювати файли .step/.stp з Snapmaker Orca" -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "" "Якщо включено, встановлює Snapmaker Orca як програму за замовчуваннямдля " "відкриття файлів .step" @@ -6808,44 +7992,8 @@ msgstr "" msgid "Associate web links to Snapmaker Orca" msgstr "Асоціювати веб-посилання з Snapmaker Orca" -msgid "Associate URLs to Snapmaker Orca" -msgstr "Асоціювати URL-адреси з Snapmaker Orca" - -msgid "Maximum recent projects" -msgstr "Максимум останніх проектів" - -msgid "Maximum count of recent projects" -msgstr "Максимальна кількість останніх проектів" - -msgid "Clear my choice on the unsaved projects." -msgstr "Очистити мій вибір для незбережених проектів." - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "Немає попереджень при завантаженні файлу 3MF із зміненими G-кодами" - -msgid "Auto-Backup" -msgstr "Автобекап" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." +msgid "Developer" msgstr "" -"Періодично робіть резервну копію вашого проекту для відновлення після " -"випадкового збою." - -msgid "every" -msgstr "кожен" - -msgid "The peroid of backup in seconds." -msgstr "Період резервного копіювання в секундах." - -msgid "Downloads" -msgstr "Завантаження" - -msgid "Dark Mode" -msgstr "Темний режим" - -msgid "Enable Dark mode" -msgstr "Увімкнути темний режим" msgid "Develop mode" msgstr "Режим розробки" @@ -6853,11 +8001,42 @@ msgstr "Режим розробки" msgid "Skip AMS blacklist check" msgstr "Пропустити перевірку чорного списку AMS" -msgid "Home page and daily tips" -msgstr "Головна сторінка та щоденні поради" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "Показувати домашню сторінку під час запуску" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Журнал рівня" + +msgid "fatal" +msgstr "фатальний" + +msgid "error" +msgstr "помилка" + +msgid "warning" +msgstr "попередження" + +msgid "debug" +msgstr "налагодження" + +msgid "trace" +msgstr "слід" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "Налаштування синхронізації" @@ -6866,7 +8045,7 @@ msgid "User sync" msgstr "Синхронізація користувача" msgid "Preset sync" -msgstr "Синхронізація пресетів" +msgstr "Синхронізація профілів" msgid "Preferences sync" msgstr "Синхронізація налаштувань" @@ -6898,24 +8077,6 @@ msgstr "Увімкнути SSL(FTP)" msgid "Internal developer mode" msgstr "Внутрішній режим розробника" -msgid "Log Level" -msgstr "Журнал рівня" - -msgid "fatal" -msgstr "фатальний" - -msgid "error" -msgstr "помилка" - -msgid "warning" -msgstr "попередження" - -msgid "debug" -msgstr "налагодження" - -msgid "trace" -msgstr "слід" - msgid "Host Setting" msgstr "Налаштування хоста" @@ -6937,30 +8098,36 @@ msgstr "кнопка збереження налагодження" msgid "save debug settings" msgstr "зберегти налаштування налагодження" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "Налаштування налагодження успішно збережено!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "Перемкніть хмарне середовище, будь ласка, увійдіть знову!" msgid "System presets" -msgstr "Системні пресети" +msgstr "Системні профілі" msgid "User presets" -msgstr "Користувацькі пресети" +msgstr "Профілі користувача" msgid "Incompatible presets" msgstr "Несумісні пресети" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" -msgstr "AMS філамент" +msgstr "Філамент AMS" -msgid "Click to pick filament color" +msgid "Right filaments" +msgstr "" + +msgid "Click to select filament color" msgstr "Натисніть, щоб вибрати колір філаменту" -msgid "Please choose the filament colour" -msgstr "Будь ласка, виберіть колір філаменту" - msgid "Add/Remove presets" msgstr "Додати/видалити пресети" @@ -6970,17 +8137,32 @@ msgstr "Змінити попереднє встановлення" msgid "Project-inside presets" msgstr "Внутрішні пресети проекту" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "Додати/видалити філаменти" msgid "Add/Remove materials" msgstr "Додати/видалити матеріали" -msgid "Select/Remove printers(system presets)" -msgstr "Вибрати/Вилучити принтери (системні налаштування)" +msgid "Select/Remove printers (system presets)" +msgstr "Вибрати/Вилучити принтери (системні профілі)" msgid "Create printer" -msgstr "Створити" +msgstr "Створити принтер" + +msgid "Empty" +msgstr "Порожній" + +msgid "Incompatible" +msgstr "Несумісний" msgid "The selected preset is null!" msgstr "Обраний пресет є порожнім!" @@ -7000,6 +8182,12 @@ msgstr "Будь ласка, введіть значення шару (≥ 2)." msgid "Plate name" msgstr "Назва пластини" +msgid "Same as Global Plate Type" +msgstr "Так само, як Глобальний Тип Пластини" + +msgid "Bed type" +msgstr "Тип столу" + msgid "Same as Global Print Sequence" msgstr "Те ж, що й глобальна послідовність друку" @@ -7018,17 +8206,14 @@ msgstr "Спіральна ваза" msgid "First layer filament sequence" msgstr "Послідовність філаменту першого шару" -msgid "Same as Global Plate Type" -msgstr "Так само, як Глобальний Тип Пластини" - msgid "Same as Global Bed Type" msgstr "Те ж, що й глобальний тип столу" msgid "By Layer" -msgstr "За шаром" +msgstr "Пошарово" msgid "By Object" -msgstr "По об'єкту" +msgstr "Кожен об'єкт окремо" msgid "Accept" msgstr "Приймати" @@ -7039,29 +8224,29 @@ msgstr "Вийти" msgid "Slice all plate to obtain time and filament estimation" msgstr "Розріжте всю пластину, щоб отримати оцінку часу та філаменту" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "Упаковка даних проекту у файл 3mf" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "Завантаження 3mf" msgid "Jump to model publish web page" msgstr "Перейти на веб-сторінку публікації моделі" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" "Примітка. Підготовка може тривати кілька хвилин. Будь ласка, будьте терплячі." msgid "Publish" msgstr "Публікувати" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "Публікація скасована" msgid "Slicing Plate 1" msgstr "Пластина для нарізки 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "Упаковка даних у 3mf" msgid "Jump to webpage" @@ -7080,7 +8265,7 @@ msgstr "Налаштування проекту всередині" msgid "Name is unavailable." msgstr "Ім'я недоступне." -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "Перезаписування системного профілю заборонено" #, boost-format @@ -7088,10 +8273,12 @@ msgid "Preset \"%1%\" already exists." msgstr "Предустановка \\%1%\\ вже існує." #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "Предустановка \\%1%\\ вже існує і несумісна з поточним принтером." -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "Зверніть увагу, що дія збереження замінить цей пресет" msgid "The name cannot be the same as a preset alias name." @@ -7127,59 +8314,71 @@ msgstr "Просто перейдіть на \"%1%\"" msgid "Task canceled" msgstr "Завдання скасовано" -msgid "(LAN)" -msgstr "(LAN)" - -msgid "Search" -msgstr "Пошук" - -msgid "My Device" -msgstr "Мій пристрій" - -msgid "Other Device" -msgstr "Інші пристрої" - -msgid "Online" -msgstr "У мережі" - -msgid "Input access code" -msgstr "Введіть код доступу" - -msgid "Can't find my devices?" -msgstr "Не можу знайти пристрої?" - -msgid "Log out successful." -msgstr "Вийти успішно." - -msgid "Busy" -msgstr "Зайнятий" - msgid "Bambu Cool Plate" -msgstr "Холодний стіл" +msgstr "Bambu Холодна Пластина" msgid "PLA Plate" -msgstr "PLA Plate" +msgstr "PLA Пластина" msgid "Bambu Engineering Plate" -msgstr "Інженерний стіл" +msgstr "Bambu Інженерна Пластина" msgid "Bambu Smooth PEI Plate" -msgstr "Bambu Smooth PEI пластина" +msgstr "Bambu Гладка PEI Пластина" msgid "High temperature Plate" -msgstr "High temperature Plate" +msgstr "Високотемпературна Пластина" msgid "Bambu Textured PEI Plate" -msgstr "Текстурована пластина PEI з текстурою Bambu" +msgstr "Bambu Текстурована PEI пластина" -msgid "Send print job to" -msgstr "Надіслати завдання на друк на" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "Калібрування динаміки потоку" -msgid "Click here if you can't connect to the printer" -msgstr "Клацніть тут, якщо ви не можете підключитися до принтера" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "відправлення завершено" @@ -7187,59 +8386,15 @@ msgstr "відправлення завершено" msgid "Error code" msgstr "Код помилки" -msgid "No login account, only printers in LAN mode are displayed" +msgid "High Flow" msgstr "" -"Немає облікового запису для входу, відображаються лише принтери в режимі LAN" - -msgid "Connecting to server" -msgstr "Підключення до сервера" - -msgid "Synchronizing device information" -msgstr "Синхронізація інформації про пристрій" - -msgid "Synchronizing device information time out" -msgstr "Тайм-аут синхронізації інформації про пристрій" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "Неможливо надіслати завдання друку, коли принтер оновлює мікропрограму" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "" -"Принтер виконує вказівки. Будь ласка, перезапустіть друк після неїзакінчення" - -msgid "The printer is busy on other print job" -msgstr "Принтер зайнятий іншим завданням друку" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"Філамент %s перевищує кількість слотів AMS. Будь ласка, оновіть прошивку " -"принтер для підтримки призначення слотів AMS." - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "" -"Філамент перевищує кількість слотів AMS. Будь ласка, оновіть " -"прошивкупринтера\n" -"для підтримки призначення слотів AMS." - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "" -"Встановили зіставлення ниток зі слотами AMS. Ви можете натиснути\n" -"Філамент вище, щоб змінити її слот зіставлення AMS" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "" -"Клацніть кожен філамент вище, щоб вказати його слот зіставлення AMS,Перш ніж " -"відправити завдання на друк" #, c-format, boost-format msgid "" @@ -7256,38 +8411,12 @@ msgstr "" "Філамент не відповідає філаменту в слоті AMS. Будь ласка, оновіть Прошивка " "принтера для підтримки призначення слотів AMS." -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"Прошивка принтера підтримує лише послідовне зіставлення філаменту => AMS " -"слот." - -msgid "An SD card needs to be inserted before printing." -msgstr "Перед початком друку необхідно вставити картку SD." - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -"Вибраний принтер (%s) несумісний з обраним профілем принтера в різальні (%s)." - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "SD-карта повинна бути вставлена для запису таймлапсу." - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "" -"Неможливо надіслати завдання друку на принтер, прошивка якого повинна бути " -"оновлено." - -msgid "Cannot send the print job for empty plate" -msgstr "Неможливо надіслати завдання на друк для порожньої форми" - -msgid "This printer does not support printing all plates" -msgstr "Цей принтер не підтримує друк усіх форм" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7297,19 +8426,25 @@ msgstr "" "створювати відео в режимі таймлапсу." msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" -"Таймлапс не підтримується через те, що послідовність друку встановлена в “За " -"об’єктом”." msgid "Errors" msgstr "Помилки" -msgid "Please check the following:" -msgstr "Будь ласка, перевірте таке:" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7326,30 +8461,8 @@ msgstr "" "необхідними нитками. Якщо вони гаразд, натисніть \"Подтвердити\", щоб почати " "друк." -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "сопло в налаштуваннях: %s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "сопло у пам'яті: %.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"Ваш діаметр сопла в розрізаному файлі не відповідає запам’ятаному діаметру " -"сопла. Якщо ви недавно змінили сопло, будь ласка, перейдіть до “Пристрій > " -"Частини принтера”, щоб змінити налаштування." - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"Друк високотемпературного матеріалу (%s матеріал) з %s може призвести до " -"пошкодження сопла" +msgid "Please check the following:" +msgstr "Будь ласка, перевірте таке:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "Будь ласка, виправте помилку вище, інакше друк не може продовжитися." @@ -7359,28 +8472,207 @@ msgid "" msgstr "Натисніть кнопку підтвердження, якщо ви все ще хочете продовжити друк." msgid "" -"Connecting to the printer. Unable to cancel during the connection process." +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -"З’єднання з принтером. Під час процесу підключення скасувати неможливо." msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." +"This process determines the dynamic flow values to improve overall print " +"quality." msgstr "" -"Увага! Калібрування потоку на Textured PEI Plate може не вдалося через " -"розсіяну поверхню." -msgid "Automatic flow calibration using Micro Lidar" -msgstr "Автоматична калібрування потоку за допомогою мікро лідару" +msgid "Preparing print job" +msgstr "Підготовка завдання для друку" -msgid "Modifying the device name" -msgstr "Зміна імені пристрою" +msgid "The name length exceeds the limit." +msgstr "Довжина імені перевищує обмеження." -msgid "Bind with Pin Code" -msgstr "Прив’язати за допомогою Пін-коду" +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Send to Printer SD card" -msgstr "Надіслати на SD-карту принтера" +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Клацніть тут, якщо ви не можете підключитися до принтера" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "" +"Немає облікового запису для входу, відображаються лише принтери в режимі LAN" + +msgid "Connecting to server..." +msgstr "Підключення до сервера" + +msgid "Synchronizing device information..." +msgstr "Синхронізація інформації про пристрій" + +msgid "Synchronizing device information timed out." +msgstr "Тайм-аут синхронізації інформації про пристрій" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "Неможливо надіслати завдання друку, коли принтер оновлює мікропрограму" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "" +"Принтер виконує вказівки. Будь ласка, перезапустіть друк після неїзакінчення" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "" +"Неможливо надіслати завдання друку на принтер, прошивка якого повинна бути " +"оновлено." + +msgid "Cannot send a print job for an empty plate." +msgstr "Неможливо надіслати завдання на друк для порожньої форми" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Цей принтер не підтримує друк усіх форм" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "Не вдалося надіслати завдання на друк під час оновлення" @@ -7388,16 +8680,16 @@ msgstr "Не вдалося надіслати завдання на друк п msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Вибраний принтер несумісний зі встановленими налаштуваннями." -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "Перед надсиланням на картку SD принтера необхідно вставити картку SD." +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "" "Принтер повинен бути підключений до тієї ж локальної мережі, що й Orca " "Slicer." -msgid "The printer does not support sending to printer SD card." -msgstr "Принтер не підтримує надсилання на картку SD принтера." +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "Нарізка прибл." @@ -7458,7 +8750,7 @@ msgstr "Вхід не вдається. Будь ласка, перевірте msgid "Log in printer" msgstr "Вхід до принтера" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "Ви хочете увійти до цього принтера з поточним обліковим записом?" msgid "Check the reason" @@ -7471,10 +8763,10 @@ msgid "Terms and Conditions" msgstr "Умови використання" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "Дякуємо за покупку пристрою Bambu Lab. Перед використанням вашого пристрою " @@ -7504,11 +8796,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "У спільноті 3D-друку ми навчаємося на прикладі успіхів і невдач інших, щоб " "налаштувати параметри і налаштування свого власного зрізування. %s " @@ -7551,10 +8843,10 @@ msgid "Save current %s" msgstr "Зберегти поточний %s" msgid "Delete this preset" -msgstr "Видалити цей пресет" +msgstr "Видалити цей профіль" msgid "Search in preset" -msgstr "Пошук у пресеті" +msgstr "Пошук у профілі" msgid "Click to reset all settings to the last saved preset." msgstr "" @@ -7562,60 +8854,71 @@ msgstr "" "установки." msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"Prime Tower потрібно для плавного таймлапсу. Можуть бути недоліки в " -"моделібез головної вежі. Ви впевнені, що хочете вимкнути основну вежу?" +"Для плавного таймлапсу потребується Підготовча вежа. Без Підготовчої вежі на " +"моделі можуть виникати дефекти. Ви впевнені, що хочете вимкнути Підготовчу " +"вежу?" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"Для плавного таймлапсу потрібно Prime Tower. Можуть бути недоліки в " -"моделіБез головної вежі. Ви хочете включити головну вежу?" +"Для плавного таймлапсу потребується підготовча вежа. Без підготовчої вежі в " +"моделі можуть бути недоліки. Ви хочете включити головну вежу?" msgid "Still print by object?" -msgstr "Ви все ще друкуєте за об’єктом?" +msgstr "Все одно друкувати кожен об'єкт окремо?" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"Ми додали експериментальний стиль \"Tree Slim\", який відрізняється меншим " -"розміром, але слабким.\n" -"Ми рекомендуємо використовувати його з: 0 інтерфейсних шарів, 0 верхнього " -"відстань, 2 периметри." + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"При використанні матеріалу підтримки для інтерфейсу підтримки ми " +"рекомендуємо наступні налаштування:\n" +"0 відстань верхнього шару Z, 0 відстань між інтерфейсами, перемежований " +"прямокутний візерунок та вимкнена незалежна висота шару підтримки." msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"Змінити ці налаштування автоматично? \n" +"Змінити ці налаштування автоматично?\n" "Так - Змінити ці налаштування автоматично\n" "Ні - Не змінювати ці настройки для мене" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"Для стилів \"Tree Strong\" та \"Tree Hybrid\" ми рекомендуємо наступні " -"параметри: не менше 2 інтерфейсних шарів, не менше 0,1 мм відстань між " -"вершинами z або використання допоміжних матеріалів в якості інтерфейсу." - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"При використанні допоміжного матеріалу для друку підтримки рекомендується \n" -"налаштування:\n" -"0 відстань між вершинами z, 0 відстань між підтримкою, концентричний малюнок " -"та відключення висота незалежного опорного шару" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7629,6 +8932,14 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "Ви впевнені, що хочете ввімкнути цю опцію?" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -7638,13 +8949,13 @@ msgstr "" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "Висота шару перевищує ліміт у Налаштуваннях принтера -> Екструдер -> Ліміти " "висоти шару, це може призвести до проблем з якістю друку." -msgid "Adjust to the set range automatically? \n" -msgstr "Автоматично налаштувати на встановлений діапазон? \n" +msgid "Adjust to the set range automatically?\n" +msgstr "Автоматично налаштувати на встановлений діапазон?\n" msgid "Adjust" msgstr "Налаштувати" @@ -7654,9 +8965,9 @@ msgstr "Ігнорувати" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "Експериментальна функція: Втягування та відрізання філаменту на більшій " "відстані під час зміни філаменту для мінімізації промивання. Хоча це може " @@ -7665,9 +8976,9 @@ msgstr "" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "Експериментальна функція: Втягування та відрізання філаменту на більшій " "відстані під час зміни філаменту для мінімізації промивання. Хоча це може " @@ -7686,6 +8997,82 @@ msgstr "" "Клацніть правою кнопкою миші на порожній позиції монтажної плити та виберіть " "\"Додати Примітів\"->\"Timelapse Wipe Tower\"." +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Буде створено копію поточного системного пресету, який буде від'єднано від " +"системного пресету." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Поточний власний пресет буде від'єднаний від батьківського системного " +"пресету." + +msgid "Modifications to the current profile will be saved." +msgstr "Зміни до поточного профілю буде збережено." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Цю дію неможливо відмінити.\n" +"Хочете продовжити?" + +msgid "Detach preset" +msgstr "Від'єднати пресет" + +msgid "This is a default preset." +msgstr "Цей пресет є пресетом за-замовчуванням." + +msgid "This is a system preset." +msgstr "Цей пресет є системним пресетом." + +msgid "Current preset is inherited from the default preset." +msgstr "Поточний пресет успадковується від пресету за замовчуванням." + +msgid "Current preset is inherited from" +msgstr "Поточний пресет успадковується від" + +msgid "It can't be deleted or modified." +msgstr "Його не можна видалити або змінити." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Будь-які модифікації слід зберігати як новий пресет, успадкований від цього." + +msgid "To do that please specify a new name for the preset." +msgstr "Для цього вкажіть нову назву пресету." + +msgid "Additional information:" +msgstr "Додаткова інформація:" + +msgid "vendor" +msgstr "виробник" + +msgid "printer model" +msgstr "модель принтеру" + +msgid "default print profile" +msgstr "профіль друку за замовчанням" + +msgid "default filament profile" +msgstr "профіль філаметну за замовчанням" + +msgid "default SLA material profile" +msgstr "профіль SLA-матеріалу за замовчанням" + +msgid "default SLA print profile" +msgstr "профіль SLA-друку за замовчанням" + +msgid "full profile name" +msgstr "повне ім'я профілю" + +msgid "symbolic profile name" +msgstr "символічне ім'я профілю" + msgid "Line width" msgstr "Ширина лінії" @@ -7705,7 +9092,7 @@ msgid "Bridging" msgstr "Створення мостів" msgid "Overhangs" -msgstr "Звисання" +msgstr "Нависання" msgid "Walls" msgstr "Стінки" @@ -7720,22 +9107,22 @@ msgid "Other layers speed" msgstr "Швидкість інших шарів" msgid "Overhang speed" -msgstr "Швидкість звису" +msgstr "Швидкість нависань" msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"Це швидкість для різних градусів звису. Ступені звису виражаються в " +"Це швидкість для різних градусів нависання. Ступені нависання виражається у " "відсотках від ширини лінії. 0 швидкість означає відсутність уповільнення для " -"діапазону ступенів звису і використовується швидкість друку стінок" +"діапазону ступенів нависання і використовується швидкість друку стінок" msgid "Bridge" msgstr "Міст" msgid "Set speed for external and internal bridges" -msgstr "Встановіть швидкість для зовнішнього та внутрішнього мостів" +msgstr "Встановіть швидкість для зовнішніх та внутрішніх мостів" msgid "Travel speed" msgstr "Швидкість переміщення" @@ -7752,14 +9139,26 @@ msgstr "Підкладка" msgid "Support filament" msgstr "Філамент підтримки" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "Органічні підтримки" -msgid "Skirt" -msgstr "Плінтус" +msgid "Multimaterial" +msgstr "Мультиматеріал" msgid "Prime tower" -msgstr "Вежа Очищення" +msgstr "Підготовча вежа" + +msgid "Filament for Features" +msgstr "Філамент для ознак" + +msgid "Ooze prevention" +msgstr "Запобігання просочування" + +msgid "Skirt" +msgstr "Спідниця" msgid "Special mode" msgstr "Спеціальний режим" @@ -7794,6 +9193,7 @@ msgstr[1] "" msgstr[2] "" "Наступні рядки %s містять зарезервовані ключові слова.\n" "Видаліть їх або виконайте візуалізацію G-коду та оцінку часу друку." +msgstr[3] "" msgid "Reserved keywords found" msgstr "Знайдено зарезервовані ключові слова" @@ -7815,43 +9215,53 @@ msgstr "" "Рекомендований діапазон температур сопла для цього філаменту. 0 означає " "відсутність установки" +msgid "Flow ratio and Pressure Advance" +msgstr "Коефіцієнт потоку та Випередження тиску" + msgid "Print chamber temperature" msgstr "Температура в камері друку" msgid "Print temperature" msgstr "Температура друку" -msgid "Nozzle" -msgstr "Сопло" - msgid "Nozzle temperature when printing" msgstr "Температура сопла під час друку" -msgid "Cool plate" -msgstr "Холодний стіл" +msgid "Cool Plate (SuperTack)" +msgstr "Холодна пластина (SuperTack)" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" +msgstr "Холодна пластина" + +msgid "" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" "Температура шару при встановленій охолодній пластині. Значення 0 означає, що " "філамент\n" "не підтримує друк на Холодному столі" -msgid "Textured Cool plate" -msgstr "" +msgid "Textured Cool Plate" +msgstr "Текстурована Холодна Пластина" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" +"Температура столу при встановленій холодній пластині. Значення 0 означає що " +"філамент не підтримує друк на Холодній Пластині SuperTack" -msgid "Engineering plate" -msgstr "Інженерний стіл" +msgid "Engineering Plate" +msgstr "Інженерна Пластина" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "" "Температура стола при встановленій інженерній плиті. Значення 0 означає \n" "Філамент не підтримує друк на інженерній пластині" @@ -7860,30 +9270,27 @@ msgid "Smooth PEI Plate / High Temp Plate" msgstr "Гладка ПЕІ пластина / Високотемпературна пластина" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "Температура столу, коли встановлена Гладка ПЕІ пластина / Високотемпературна " "пластина. Значення 0 означає, що філамент не підтримує друк на Гладкій ПЕІ " "пластині / Високотемпературній пластині" msgid "Textured PEI Plate" -msgstr "Текстурована пластина PEI" +msgstr "Текстурована PEI пластина" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"Температура шару під час встановлення плити Textured PEI Plate. Значення 0 " -"означає Філамент не підтримує друк на текстурованій пластині PEI" +"Температура шару під час встановлення пластини Текстурована PEI пластина. " +"Значення 0 означає Філамент не підтримує друк на Текстурованій PEI пластині" msgid "Volumetric speed limitation" msgstr "Об'ємне обмеження швидкості" -msgid "Cooling" -msgstr "Охолодження" - msgid "Cooling for specific layer" msgstr "Охолодження для конкретного шару" @@ -7933,25 +9340,34 @@ msgstr "G-код початку філаменту" msgid "Filament end G-code" msgstr "G-код кінця філаменту" -msgid "Multimaterial" -msgstr "Мультиматеріал" - msgid "Wipe tower parameters" -msgstr "Параметри вежі витирання" +msgstr "Параметри вежі протирання" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "Параметри зміни інструменту в одно-екструдерному ММ-принтері" -msgid "Ramming settings" -msgstr "Налаштування раммінгу" +msgid "Set" +msgstr "Вибір" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "Параметри заміни інструменту в багатоекструдерних MM-принтерах" +msgid "Dependencies" +msgstr "Залежності" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "Сумісні профілі процесів" + msgid "Printable space" msgstr "Місце для друку" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Надано некоректне значення для параметру %1%: %2%" @@ -7974,7 +9390,7 @@ msgstr "Адаптивна сітка стола" msgid "Accessory" msgstr "Аксесуари" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "G-code машини" msgid "Machine start G-code" @@ -7984,7 +9400,7 @@ msgid "Machine end G-code" msgstr "Кінцевий G-code" msgid "Printing by object G-code" -msgstr "Друк за об’єктом за допомогою G-коду" +msgstr "G-коду друку кожного об'єкту окремо" msgid "Before layer change G-code" msgstr "G-code перед зміною шару" @@ -7992,9 +9408,12 @@ msgstr "G-code перед зміною шару" msgid "Layer change G-code" msgstr "G-code Зміни шару" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "G-код для часової зйомки" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "G-code Зміни філаменту" @@ -8013,6 +9432,12 @@ msgstr "Здатність руху" msgid "Normal" msgstr "Нормальний" +msgid "Resonance Avoidance" +msgstr "" + +msgid "Resonance Avoidance Speed" +msgstr "" + msgid "Speed limitation" msgstr "Обмеження швидкості" @@ -8022,20 +9447,44 @@ msgstr "Обмеження прискорення" msgid "Jerk limitation" msgstr "Обмеження ривка" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "Установка для роботи з декількома матеріалами на одному екструдері" -msgid "Wipe tower" -msgstr "Вежа витирання" +msgid "Number of extruders of the printer." +msgstr "Кількість екструдерів у принтері." -msgid "Single extruder multimaterial parameters" +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Вибрано мульти-матеріальний (ММ) друк з одним екструдером,\n" +"і всі екструдери повинні мати однаковий діаметр.\n" +"Хочете змінити діаметр для всіх екструдерів на значення діаметра сопла " +"першого екструдера?" + +msgid "Nozzle diameter" +msgstr "Діаметр сопла" + +msgid "Wipe tower" +msgstr "Вежа протирання" + +msgid "Single extruder multi-material parameters" msgstr "Параметри екструдеру в багато-екструдерному принтері" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Це принтер з підтримкою декількох матеріалів одним екструдером, діаметри " +"всіх екструдерів буде замінено новим значенням. Хочете продовжити?" + msgid "Layer height limits" msgstr "Обмеження висоти шару" -msgid "Lift Z Enforcement" -msgstr "Забезпечення стрибків Z" +msgid "Z-Hop" +msgstr "Стрибок-Z" msgid "Retraction when switching material" msgstr "Втягування під час зміни матеріалу" @@ -8050,7 +9499,15 @@ msgstr "" "Чи я повинен відключити його, щоб включити Firmware Retraction?" msgid "Firmware Retraction" -msgstr "Firmware Retraction" +msgstr "Апаратне витягування" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" msgid "Detached" msgstr "Окремий" @@ -8063,7 +9520,7 @@ msgstr "" "За цим принтером прикріплено %d налаштувань філаменту та %d налаштувань " "процесу. Ці налаштування будуть видалені, якщо принтер буде видалено." -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "" "Налаштування, які успадковуються іншими налаштуваннями, не можуть бути " "видалені!" @@ -8073,6 +9530,7 @@ msgid_plural "The following preset inherits this preset." msgstr[0] "Профіль вказаний нижче, успадковується від поточного профілю." msgstr[1] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[2] "Профілі вказані нижче, успадковуються від поточного профілю." +msgstr[3] "" #. TRN Remove/Delete #, boost-format @@ -8084,25 +9542,19 @@ msgid_plural "Following presets will be deleted too." msgstr[0] "Наступне попереднє встановлення також буде видалено." msgstr[1] "Наступні стилі також будуть видалені." msgstr[2] "Наступні стилі також будуть видалені." - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"Ви впевнені, що хочете видалити вибраний пресет?\n" -"Якщо пресет відповідає філаменту, який в даний момент використовується на " -"вашому принтері, будь ласка, скиньте інформацію про філамент для цього слоту." +msgstr[3] "" #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "Ви впевнені, що %1% вибраної установки?" -msgid "All" -msgstr "Все" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "Вибір" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" @@ -8117,7 +9569,7 @@ msgid "Process Settings" msgstr "Налаштування процесу" msgid "Undef" -msgstr "Undef" +msgstr "Невизначено" msgid "Unsaved Changes" msgstr "Незбережені зміни" @@ -8195,8 +9647,8 @@ msgstr "" "вонамістить такі незбережені зміни:" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "Ви змінили деякі налаштування пресету “%1%”. " +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Ви змінили деякі налаштування пресету “%1%”." msgid "" "\n" @@ -8211,8 +9663,8 @@ msgid "" "transfer the values you have modified to the new preset." msgstr "" "\n" -"Ви можете зберегти або відкинути змінені значення пресетів, або перенести " -"змінені значення до нового пресету." +"Ви можете зберегти або скинути змінені значення профілів, або перенести " +"змінені значення до нового профілю." msgid "You have previously modified your settings." msgstr "Ви раніше змінювали свої налаштування." @@ -8229,17 +9681,14 @@ msgstr "" msgid "Extruders count" msgstr "Кількість екструдерів" -msgid "General" -msgstr "Загальні" - msgid "Capabilities" msgstr "Можливості" msgid "Show all presets (including incompatible)" -msgstr "Показати всі налаштування (включаючи несумісні)" +msgstr "Показувати всі профілі (включаючи несумісні)" msgid "Select presets to compare" -msgstr "Виберіть налаштування для порівняння" +msgstr "Виберіть профілі для порівняння" msgid "" "You can only transfer to current active profile because it has been modified." @@ -8297,6 +9746,9 @@ msgstr "Автор" msgid "Model Name" msgstr "Назва моделі" +msgid "Description:" +msgstr "Опис:" + #, c-format, boost-format msgid "%s Update" msgstr "%s Оновлення" @@ -8307,22 +9759,19 @@ msgstr "Доступна нова версія" msgid "Configuration update" msgstr "Оновлення конфігурації" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "Доступний новий пакет конфігурації, чи хочете ви встановити його?" -msgid "Description:" -msgstr "Опис:" - msgid "Configuration incompatible" msgstr "Несумісність конфігурації" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "пакет конфігурації несумісний із поточною програмою." #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "Пакет конфігурації несумісний із поточною програмою.\n" "%s оновить пакет конфігурації, інакше він не зможе запуститися" @@ -8331,9 +9780,6 @@ msgstr "" msgid "Exit %s" msgstr "Вихід %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "пакет конфігурації несумісний з поточним APP." - msgid "Configuration updates" msgstr "Оновлення конфігурації" @@ -8343,24 +9789,41 @@ msgstr "Оновлення відсутні." msgid "The configuration is up to date." msgstr "Конфігурація є актуальною." -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Імпорт кольору файлу OBJ" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "Вкажіть кількість кольорів:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "Кількість кольорів повинна бути в діапазоні [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "Рекомендовано " -msgid "Current filament colors:" -msgstr "Поточні кольори філаменту:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "Швидке встановлення:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "Відповідність кольору" @@ -8371,31 +9834,174 @@ msgstr "Приблизне відповідання кольору." msgid "Append" msgstr "Додати" -msgid "Add consumable extruder after existing extruders." -msgstr "Додати споживчий екструдер після існуючих екструдерів." +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "Скинути відображені екструдери." -msgid "Cluster colors" -msgstr "Згрупувати кольори" - -msgid "Map Filament" -msgstr "Відображення філаменту" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"Примітка: Колір вже вибрано. Ви можете вибрати ОК \n" -" щоб продовжити або вручну відкоригувати його." msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Використовуйте AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Вибраний принтер (%s) несумісний з обраним профілем принтера в різальні (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Таймлапс не підтримується через те, що послідовність друку встановлена в “За " +"об’єктом”." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"Попередження: Кількість новостворених та \n" -" поточних екструдерів перевищує 16." msgid "Ramming customization" msgstr "Налаштування раммінгу" @@ -8421,66 +10027,53 @@ msgstr "" "Це налаштування на рівні експерта, неправильне регулювання, ймовірно, " "призведе до заклинювання, подрібнення екструдерного колеса до філаменту тощо." -msgid "Total ramming time" -msgstr "Загальний час швидкої екструзії" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "" -msgid "s" -msgstr "c" +msgid "Total ramming" +msgstr "" -msgid "Total rammed volume" -msgstr "Загальний обсяг швидкої екструзії" +msgid "Volume" +msgstr "" -msgid "Ramming line width" -msgstr "Ширина ліній раммінгу" - -msgid "Ramming line spacing" -msgstr "Проміжки між лініями раммінгу" - -msgid "Auto-Calc" -msgstr "Автокалькулятор" - -msgid "Re-calculate" -msgstr "Перерахувати" - -msgid "Flushing volumes for filament change" -msgstr "Обсяги промивання для зміни Філаменту" +msgid "Ramming line" +msgstr "" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca буде перераховувати об'єми видавлювання нитки кожного разу, коли колір " -"ниток змінюється. Ви можете вимкнути автоматичний розрахунок у меню Orca " -"Slicer > Параметри" msgid "Flushing volume (mm³) for each filament pair." -msgstr "Об'єм промивки (мм³) для кожної пари Філаменту." +msgstr "Об'єм промивки (мм³) для кожної пари філаментів." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "Пропозиція: Об'єм промивання в діапазоні [%d, %d]" +msgstr "Пропозиція: Об'єм промивки в діапазоні [%d, %d]" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Множина повинна знаходитися в діапазоні [%.2f, %.2f]" +msgid "Re-calculate" +msgstr "Перерахувати" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "Множина" -msgid "unloaded" -msgstr "вивантажено" +msgid "Flushing volumes for filament change" +msgstr "Об'єми промивки для зміни філаменту" -msgid "loaded" -msgstr "завантажено" - -msgid "Filament #" -msgstr "Філамент #" - -msgid "From" -msgstr "Від" - -msgid "To" -msgstr "В" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " @@ -8498,7 +10091,7 @@ msgstr "" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" "Відсутній компонент BambuSource, зареєстрований для відтворення медіафайлів! " "Будь ласка, перевстановіть BambuStudio або зверніться за додатковою " @@ -8513,7 +10106,7 @@ msgstr "" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" "Вашій системі бракує кодеків H.264 для GStreamer, які необхідні для " @@ -8544,12 +10137,6 @@ msgstr "Список об'єктів" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Імпорт геометричних даних із файлів STL/STEP/3MF/OBJ/AMF" -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - msgid "Paste from clipboard" msgstr "Вставити з буфера обміну" @@ -8565,69 +10152,42 @@ msgstr "Показати список клавіш" msgid "Global shortcuts" msgstr "Глобальні ярлики" -msgid "Rotate View" -msgstr "Повернути вигляд" - msgid "Pan View" msgstr "Панорамний вигляд" -msgid "Mouse wheel" -msgstr "Колісок миші" +msgid "Rotate View" +msgstr "Повернути вигляд" msgid "Zoom View" msgstr "Перегляд масштабу" -msgid "Shift+A" -msgstr "Shift+A" - -msgid "Shift+R" -msgstr "Shift+R" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "Автоматично орієнтує вибрані об'єкти або всі об'єкти. Якщо вибрано об'єкти, " "він просто орієнтує обрані. В іншому випадку він будеОрієнтувати всі об'єкти " -"на поточному диску." +"на поточному проєкт." -msgid "Shift+Tab" -msgstr "Shift+Tab" +msgid "Auto orients all objects on the active plate." +msgstr "Автоматично орієнтує всі об'єкти на поточному диску." msgid "Collapse/Expand the sidebar" msgstr "Згорнути/розгорнути бічну панель" -msgid "⌘+Any arrow" -msgstr "⌘+будь-яка стрілка" +msgid "Any arrow" +msgstr "" msgid "Movement in camera space" msgstr "Рух у просторі камери" -msgid "⌥+Left mouse button" -msgstr "⌥+Ліва кнопка миші" - msgid "Select a part" msgstr "Виберіть частину" -msgid "⌘+Left mouse button" -msgstr "⌘+Ліва кнопка миші" - msgid "Select multiple objects" msgstr "Вибрати кілька об'єктів" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+будь-яка стрілка" - -msgid "Alt+Left mouse button" -msgstr "Alt+Ліва кнопка миші" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+Ліва кнопка миші" - -msgid "Shift+Left mouse button" -msgstr "Shift+Ліва кнопка миші" - msgid "Select objects by rectangle" msgstr "Виділити об'єкти прямокутником" @@ -8655,9 +10215,6 @@ msgstr "Стрілка праворуч" msgid "Move selection 10 mm in positive X direction" msgstr "Перемістити виділення на 10 мм у позитивному напрямку X" -msgid "Shift+Any arrow" -msgstr "Shift+будь-яка стрілка" - msgid "Movement step set to 1 mm" msgstr "Крок переміщення встановлено на 1 мм" @@ -8691,17 +10248,23 @@ msgstr "Виділити всі об'єкти" msgid "Gizmo move" msgstr "Рух Gizmo" +msgid "Gizmo rotate" +msgstr "Поворот Gizmo" + msgid "Gizmo scale" msgstr "Шкала Gizmo" -msgid "Gizmo rotate" -msgstr "Поворот Gizmo" +msgid "Gizmo place face on bed" +msgstr "Покласти грань на стіл Gizmo" msgid "Gizmo cut" msgstr "Виріз Gizmo" -msgid "Gizmo Place face on bed" -msgstr "Gizmo Покладіть обличчя на стіл" +msgid "Gizmo mesh boolean" +msgstr "Булеві операції Gizmo" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "" msgid "Gizmo SLA support points" msgstr "Точки підтримки Gizmo SL" @@ -8709,8 +10272,17 @@ msgstr "Точки підтримки Gizmo SL" msgid "Gizmo FDM paint-on seam" msgstr "Швид, що фарбується Gizmo FDM" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo Текстове тиснення / гравіювання" +msgid "Gizmo text emboss/engrave" +msgstr "Текстове тиснення/гравіювання Gizmo" + +msgid "Gizmo measure" +msgstr "виміряти Gizmo" + +msgid "Gizmo assemble" +msgstr "Зібрати Gizmo" + +msgid "Gizmo brim ears" +msgstr "Краєчки Gizmo" msgid "Zoom in" msgstr "Приблизити" @@ -8727,32 +10299,20 @@ msgstr "Тарілка" msgid "Move: press to snap by 1mm" msgstr "Переміщення: натисніть для переміщення на 1 мм" -msgid "⌘+Mouse wheel" -msgstr "⌘+Колесо миші" - msgid "Support/Color Painting: adjust pen radius" msgstr "Підтримка/Колірне малювання: регулювання радіуса пера" -msgid "⌥+Mouse wheel" -msgstr "⌥+Колесо миші" - msgid "Support/Color Painting: adjust section position" msgstr "Підтримка/кольорове фарбування: регулювання положення секцій" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+Колесо миші" - -msgid "Alt+Mouse wheel" -msgstr "Alt+колесо миші" - msgid "Gizmo" -msgstr "Gizmo" +msgstr "" msgid "Set extruder number for the objects and parts" msgstr "Встановіть номер екструдера для об'єктів та деталей" -msgid "Delete objects, parts, modifiers " -msgstr "Видалення об'єктів, частин, модифікаторів " +msgid "Delete objects, parts, modifiers" +msgstr "Видалення об'єктів, частин, модифікаторів" msgid "Select the object/part and press space to change the name" msgstr "Виберіть об'єкт/деталь і натисніть пробіл, щоб змінити назву" @@ -8781,15 +10341,12 @@ msgstr "Горизонтальний повзунок - Перемістити msgid "On/Off one layer mode of the vertical slider" msgstr "Увімкнення/вимкнення одношарового режиму вертикального повзунка" -msgid "On/Off g-code window" -msgstr "Увімкнення/вимкнення вікна g-коду" +msgid "On/Off G-code window" +msgstr "Увімкнення/вимкнення вікна G-коду" msgid "Move slider 5x faster" msgstr "Переміщення повзунка в 5 разів швидше" -msgid "Shift+Mouse wheel" -msgstr "Shift+колесо миші" - msgid "Horizontal slider - Move to start position" msgstr "Горизонтальний повзунок - Перемістити в початкове положення" @@ -8800,7 +10357,7 @@ msgid "Release Note" msgstr "Примітка до випуску" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "версія %s інформація про оновлення:" msgid "Network plug-in update" @@ -8813,7 +10370,7 @@ msgstr "" "Slicer." #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Доступний новий мережевий плагін (%s), чи хочете ви встановити його?" msgid "New version of Snapmaker Orca" @@ -8822,83 +10379,72 @@ msgstr "Нова версія Snapmaker Orca" msgid "Skip this Version" msgstr "Пропустити цю версію" -msgid "Done" -msgstr "Виконано" - -msgid "resume" -msgstr "продовжити" - -msgid "Resume Printing" -msgstr "Відновити друк" - -msgid "Resume Printing(defects acceptable)" -msgstr "Відновлення друку (прийнятно дефекти)" - -msgid "Resume Printing(problem solved)" -msgstr "Відновлення друку (проблема вирішена)" - -msgid "Stop Printing" -msgstr "Зупинити друк" - -msgid "Check Assistant" -msgstr "Перевірка помічника" - -msgid "Filament Extruded, Continue" -msgstr "Філамент витиснутий, Продовжити" - -msgid "Not Extruded Yet, Retry" -msgstr "Ще не витиснуто філамент, Повторити" - -msgid "Finished, Continue" -msgstr "Завершено, Продовжити" - -msgid "Load Filament" -msgstr "Завантажте філамент" - -msgid "Filament Loaded, Resume" -msgstr "Філамент завантажений, Відновити" - -msgid "View Liveview" -msgstr "Перегляд в реальному часі" - msgid "Confirm and Update Nozzle" msgstr "Підтвердити і оновити сопло" -msgid "LAN Connection Failed (Sending print file)" -msgstr "Помилка з’єднання LAN (Надсилання файлу друку)" +msgid "Connect the printer using IP and access code" +msgstr "Підключити принтер за допомогою IP-адреси та коду доступу" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." msgstr "" -"Крок 1: Переконайтеся, що Snapmaker Orca і ваш принтер знаходяться в одній " -"локальній мережі." msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"Крок 2, якщо наведені нижче IP і код доступу відрізняються від " -"фактичнихзначень \n" -"на вашому принтері, будь ласка, виправте їх." msgid "IP" -msgstr "IP" +msgstr "" msgid "Access Code" msgstr "Код доступу" +msgid "Printer model" +msgstr "Модель принтера" + +msgid "Printer name" +msgstr "Назва принтера" + msgid "Where to find your printer's IP and Access Code?" msgstr "Де знайти IP-адресу та код доступу вашого принтера?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" -"Крок 3: Виконайте пінг до IP-адреси для перевірки втрат пакетів та затримки." +msgid "Connect" +msgstr "Підключити" -msgid "Test" -msgstr "Тест" +msgid "Manual Setup" +msgstr "Ручне налаштування" msgid "IP and Access Code Verified! You may close the window" -msgstr "IP-адреса та доступний код перевірено! Ви можете закрити вікно" +msgstr "" + +msgid "connecting..." +msgstr "підключення…" + +msgid "Failed to connect to printer." +msgstr "Не вдалося підключитися до принтера." + +msgid "Failed to publish login request." +msgstr "Не вдалося опублікувати запит на вхід." + +msgid "The printer has already been bound." +msgstr "Принтер вже прив’язаний." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "" +"Неправильний режим принтера, будь ласка, переключіться на режим лише LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Підключення до принтера… Діалогове вікно закриється пізніше" msgid "Connection failed, please double check IP and Access Code" msgstr "З’єднання не вдалося, будь ласка, перевірте IP-адресу та доступний код" @@ -8910,31 +10456,51 @@ msgstr "" "З’єднання не вдалося! Якщо ваша IP-адреса та доступний код вірні, \n" "перейдіть до кроку 3 для вирішення проблем з мережею" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "Модель:" -msgid "Serial:" -msgstr "Серійний номер:" - -msgid "Version:" -msgstr "Версія:" - msgid "Update firmware" msgstr "Оновити прошивку" msgid "Beta version" msgstr "Бета-версія" -msgid "Latest version" -msgstr "Остання версія" - msgid "Updating" msgstr "Оновлення" -msgid "Updating failed" +msgid "Update failed" msgstr "Оновлення не вдалося" -msgid "Updating successful" +msgid "Update successful" msgstr "Успішне оновлення" msgid "" @@ -8965,8 +10531,8 @@ msgstr "" msgid "Extension Board" msgstr "Плата розширення" -msgid "Saving objects into the 3mf failed." -msgstr "Збереження об'єктів у 3mf не вдалося." +msgid "Saving objects into the 3MF failed." +msgstr "Збереження об'єктів у 3MF не вдалося." msgid "Only Windows 10 is supported." msgstr "Підтримується лише Windows 10." @@ -8989,23 +10555,23 @@ msgstr "Ремонт не вдалося." msgid "Loading repaired objects" msgstr "Завантаження відремонтованих об'єктів" -msgid "Exporting 3mf file failed" -msgstr "Експорт файлу 3mf не вдалося" +msgid "Exporting 3MF file failed" +msgstr "Експорт файлу 3MF не вдалося" -msgid "Import 3mf file failed" -msgstr "Імпорт файлу 3mf не вдалося" +msgid "Import 3MF file failed" +msgstr "Імпорт файлу 3MF не вдалося" -msgid "Repaired 3mf file does not contain any object" -msgstr "Відремонтований файл 3mf не містить жодного об'єкта" +msgid "Repaired 3MF file does not contain any object" +msgstr "Відремонтований файл 3MF не містить жодного об'єкта" -msgid "Repaired 3mf file contains more than one object" -msgstr "Відремонтований файл 3mf містить більше одного об'єкта" +msgid "Repaired 3MF file contains more than one object" +msgstr "Відремонтований файл 3MF містить більше одного об'єкта" -msgid "Repaired 3mf file does not contain any volume" -msgstr "Відремонтований файл 3mf не містить жодного тома" +msgid "Repaired 3MF file does not contain any volume" +msgstr "Відремонтований файл 3MF не містить жодного тома" -msgid "Repaired 3mf file contains more than one volume" -msgstr "Відремонтований файл 3mf містить більше одного тома" +msgid "Repaired 3MF file contains more than one volume" +msgstr "Відремонтований файл 3MF містить більше одного тома" msgid "Repair finished" msgstr "Ремонт завершено" @@ -9034,7 +10600,7 @@ msgid "" "bottom or enable supports." msgstr "" "Один об'єкт має порожній початковий шар і не може бути надрукований. Будь " -"ласка, обріжте нижні або опори, що включають." +"ласка, обріжте нижню частину або увімкніть підтримки." #, boost-format msgid "Object can't be printed for empty layer between %1% and %2%." @@ -9055,10 +10621,17 @@ msgid "No object can be printed. Maybe too small" msgstr "Жодний об'єкт не може бути надрукований. Можливо, занадто маленький" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Ваша модель для друку розташована дуже близький до основних областей. " +"Переконайтесь, що немає зіткнення." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" -"Не вдалося згенерувати g-код для неприпустимого G-коду користувача. \n" +"Не вдалося згенерувати g-код для неприпустимого G-коду користувача.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." @@ -9070,6 +10643,15 @@ msgstr "" msgid "Generating G-code: layer %1%" msgstr "Генерація G-коду: шар %1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "Внутрішня стінка" @@ -9080,13 +10662,13 @@ msgid "Overhang wall" msgstr "Нависаюча стінка" msgid "Sparse infill" -msgstr "Заповнення" +msgstr "Часткове заповнення" msgid "Internal solid infill" msgstr "Внутрішнє суцільне заповнення" msgid "Top surface" -msgstr "Верхній шар" +msgstr "Верхня поверхня" msgid "Bottom surface" msgstr "Нижня поверхня" @@ -9107,7 +10689,7 @@ msgid "Multiple" msgstr "Кілька" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "" "Не вдалося обчислити ширину лінії %1%. Неможливо отримати значення \"%2%\" " @@ -9226,16 +10808,18 @@ msgstr "%1% знаходиться надто близько до інших, щ msgid "%1% is too tall, and collisions will be caused." msgstr "%1% занадто високий, і можуть виникнути зіткнення." -msgid " is too close to others, there may be collisions when printing." -msgstr " занадто близько до інших, під час друку можливі зіткнення." - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" " знаходиться надто близько до зони відчуження, при друку можуть виникати " "колізії." +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" -msgstr "Prime Tower" +msgstr "Підготовча вежа" msgid " is too close to others, and collisions may be caused.\n" msgstr " залишається близько до інших, що може призвести до зіткнення.\n" @@ -9245,13 +10829,34 @@ msgstr "" " знаходиться надто близько до зони відчуження, що призведе до зіткнень.\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"Не можна друкувати кілька ниток, які мають значну різницю в температурі " -"разом. В іншому випадку екструдер та сопло можуть бути заблоковані або " -"пошкоджені під час друку" msgid "No extrusions under current settings." msgstr "Немає екструзій під час поточних налаштувань." @@ -9263,6 +10868,15 @@ msgstr "" "Плавний режим таймлапсу не підтримується, коли послідовність \"по об'єкт\" " "увімкнено." +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -9276,6 +10890,14 @@ msgid "" msgstr "" "Режим спіральної вази не працює, якщо об'єкт містить більше одногоматеріалу." +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Об'єкт %1% влазить в робочий об'єм, але він перевищує максимальну висоту " +"робочого об'єму із-за компенсації усадки матеріалу." + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Об'єкт %1% перевищує максимальну висоту об'єму друку." @@ -9296,14 +10918,16 @@ msgstr "" "друку і спробувати ще раз." msgid "Variable layer height is not supported with Organic supports." -msgstr "Змінна висота шару не підтримується з органічними підтримками." +msgstr "Змінна висота шару не підтримується з Органічними підтримками." msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" -"Використання різних діаметрів насадок та різних діаметрів філаментів не " -"допускається, коли увімкнено вежу підготовки." +"Різні діаметри сопел та різні діаметри філаменту можуть працювати некоректно " +"коли ввімкнена підготовча вежа. Це експериментальна функція, тому " +"використовуйте її з обережністю." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -9313,10 +10937,11 @@ msgstr "" "адресації екструдера (use_relative_e_distances=1)." msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" -"Запобігання витіканню з увімкненою вежею підготовки в даний момент не " -"підтримується." +"Запобігання витіканню підтримується тільки для вежі протирання коли опція " +"'single_extruder_multi_material' вимкнена." msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -9326,51 +10951,69 @@ msgstr "" "Sprinter, RepRapFirmware і Repetier G-code." msgid "The prime tower is not supported in \"By object\" print." -msgstr "Під час друку \"По об'єкту\" праймер не підтримується." +msgstr "Під час друку \"По об'єкту\" підготовча вежа не підтримується." msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." msgstr "" -"Основна вежа не підтримується при включеній адаптивній висоті шару. Для " +"Підготовча вежа не підтримується при включеній адаптивній висоті шару. Для " "цього потрібно, щоб усі об'єкти мали однакову висоту шару." -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "Основна вежа вимагає, щоб «опорний зазор» був крадений висотою шару" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." +msgstr "Підготовча вежа вимагає, щоб «опорний зазор» був крадений висотою шару" -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "Основна башта вимагає, щоб усі об'єкти мали однакову висоту шару" +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "Підготовча вежа вимагає, щоб усі об'єкти мали однакову висоту шару" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." +msgstr "" +"Підготовча вежа вимагає, щоб усі об'єкти друкувалися на однаковій кількості " +"шарів підкладки" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." msgstr "" -"Основна вежа вимагає, щоб усі об'єкти друкувалися на однаковомукількості " -"шарів плоту" msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." msgstr "" -"Основна вежа вимагає, щоб усі об'єкти були розрізані з однаковоювисотою шару." +"Підготовча вежа вимагає, щоб усі об'єкти були розрізані з однаковоювисотою " +"шару." msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." +msgstr "" +"Підготовча вежа підтримується лише в тому випадку, якщо всі об'єкти мають " +"однакову змінну висоту шару" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." msgstr "" -"Основна башта підтримується лише в тому випадку, якщо всі об'єкти " -"маютьоднакову змінну висоту шару" msgid "Too small line width" -msgstr "Надто маленька ширина лінії" +msgstr "Надто мала ширина лінії" msgid "Too large line width" msgstr "Занадто велика ширина лінії" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "" -"Прайм-тауер вимагає, щоб підтримка мала однакову висоту шару з об'єктом." +"Підготовча вежа вимагає, щоб підтримка мала однакову з об'єктом висоту шару." msgid "" "Organic support tree tip diameter must not be smaller than support material " @@ -9399,7 +11042,7 @@ msgstr "" "Засоби підтримки використовуються, але підтримка не включена.Увімкніть " "підтримку." -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "Висота шару не може перевищувати діаметр сопла" msgid "" @@ -9450,6 +11093,15 @@ msgstr "" "Ви можете змінити налаштування максимального ривка у конфігурації принтера, " "щоб отримати вищу швидкість." +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9480,8 +11132,20 @@ msgstr "" "Ви можете змінити значення machine_max_acceleration_travel у конфігурації " "принтера, щоб отримати вищу швидкість." +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Усадка філаменту не буде використовуватися, оскільки усадка філаменту, що " +"використовуються, суттєво відрізняється." + msgid "Generating skirt & brim" -msgstr "Створення спідниці та кайми" +msgstr "Генерація спідниці та кайми" msgid "Exporting G-code" msgstr "Експорт G-code" @@ -9492,9 +11156,15 @@ msgstr "Генерація G-code" msgid "Failed processing of the filename_format template." msgstr "Не вдалося обробити шаблон filename_format." +msgid "Printer technology" +msgstr "Технологія принтеру" + msgid "Printable area" msgstr "Область друку" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "Площа виключення столу" @@ -9512,18 +11182,20 @@ msgid "Bed custom texture" msgstr "Текстура користувача столу" msgid "Bed custom model" -msgstr "Стіл індивідуальної моделі" +msgstr "Індивідуальна модель стола" msgid "Elephant foot compensation" -msgstr "Компенсація слонової ноги" +msgstr "Компенсація слонової стопи" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" -msgstr "Усадка початкового шару на столі для компенсації ефекту слонової ноги" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." +msgstr "" +"Зменшення початкового шару на робочій пластині для компенсації ефекту " +"слонової стопи" msgid "Elephant foot compensation layers" -msgstr "Шари компенсації слонячої стопи" +msgstr "Шари компенсації слонової стопи" msgid "" "The number of layers on which the elephant foot compensation will be active. " @@ -9540,7 +11212,7 @@ msgstr "шари" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "" "Висота нарізки для кожного шару. Найменша висота шару означає більш точний " "друк, але більше часу на друк" @@ -9548,14 +11220,22 @@ msgstr "" msgid "Printable height" msgstr "Висота друку" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "Максимальна висота друку, яка обмежена механізмом принтера" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "Бажана орієнтація" -msgid "Automatically orient stls on the Z-axis upon initial import" -msgstr "Автоматичне орієнтування stl за віссю Z під час першого імпорту" +msgid "Automatically orient STL files on the Z axis upon initial import." +msgstr "Автоматичне орієнтування STL за віссю Z під час першого імпорту" msgid "Printer preset names" msgstr "Імена налаштувань принтера" @@ -9563,7 +11243,7 @@ msgstr "Імена налаштувань принтера" msgid "Use 3rd-party print host" msgstr "Використовувати сторонній хост для друку" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "Дозволяє керувати принтером BambuLab через сторонні хости друку" msgid "Hostname, IP or URL" @@ -9587,7 +11267,7 @@ msgid "Device UI" msgstr "Інтерфейс користувача" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "" "Вкажіть URL інтерфейсу користувача пристрою, якщо він не збігається з " "print_host" @@ -9603,7 +11283,7 @@ msgstr "" "повинно утримувати \n" "API-ключ або пароль, необхідний для автентифікації." -msgid "Name of the printer" +msgid "Name of the printer." msgstr "Назва принтера" msgid "HTTPS CA File" @@ -9636,7 +11316,7 @@ msgstr "" "відключення від мережі точки розповсюдження. Можна увімкнути цю опцію для " "підписання сертифікатів під час невдалого підключення." -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "Назви налаштувань, пов'язаних з фізичним принтером" msgid "Authorization Type" @@ -9648,22 +11328,23 @@ msgstr "Ключ API" msgid "HTTP digest" msgstr "HTTP-дайджест" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "Уникати перетину стінок" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "" "Об'їжджати та уникати проїзду через стінку, що може призвести до утворенню " "плям на поверхні" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "Уникати перетину стінки - Максимальна довжина об'їзду" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "Максимальна відстань об'їзду для уникнення перетину стінки. Не об'їжджати, " "якщо відстань об'їзду більша, ніж це значення. Довжина об'їзду може бути " @@ -9677,40 +11358,44 @@ msgid "Other layers" msgstr "Інші шари" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "" -"Температура шару для всіх шарів, крім першого. Значення 0 означає філаментне " -"підтримує друк на холодному столі" - -msgid "°C" -msgstr "°C" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "" -"Температура шару для всіх шарів, крім початкового. Значення 0 означає \n" -"Філамент не підтримує друк на інженерній пластині" +"Температура столу для всіх шарів, крім першого. Значення 0 означає, що " +"філамент не підтримує друк на Холодній Пластині" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "" -"Температура шару для всіх шарів, крім початкового. Значення 0 означає \n" -"Філамент не підтримує друк на високотемпературній пластині" +"Температура столу для всіх шарів, крім першого. Значення 0 означає, що " +"філамент не підтримує друк на Текстурованій Холодній Пластині" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "" -"Температура шару для всіх шарів, крім початкового. Значення 0 означає \n" -"Філамент не підтримує друк на текстурованій пластині PEI" +"Температура столу для всіх шарів, крім першого. Значення 0 означає, що " +"філамент не підтримує друк на Інженерній Пластині" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Температура столу для всіх шарів, крім першого. Значення 0 означає, що " +"філамент не підтримує друк на Високотемпературній Пластині" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Температура столу для всіх шарів, крім першого. Значення 0 означає, що " +"філамент не підтримує друк на Текстурованій Пластині PEI" msgid "Initial layer" msgstr "Перший шар" @@ -9719,51 +11404,61 @@ msgid "Initial layer bed temperature" msgstr "Температура першого шару" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." msgstr "" -"Температура першого шару. Значення 0 означає, що філамент не підтримує друк " -"на холодному столі" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Холодній Пластині SuperTack" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Холодній Пластині" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "" -"Температура першого шару. Значення 0 означає, що філамент не підтримує друк " -"на інженерному столі" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Текстурованій Холодній Пластині" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "" -"Температура першого шару. Значення 0 означає, що філамент не підтримує друк " -"на високотемпературному столі" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Інженерній Пластині" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "" -"Температура першого шару. Значення 0 означає, що філамент не підтримує друк " -"на текстурованій пластині PEI" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Високотемпературній Пластині" -msgid "Bed types supported by the printer" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Температура столу першого шару. Значення 0 означає, що філамент не підтримує " +"друк на Текстурованій Пластині PEI" + +msgid "Bed types supported by the printer." msgstr "Типи ліжок, які підтримує принтер" msgid "Smooth Cool Plate" -msgstr "" - -msgid "Engineering Plate" -msgstr "Інженерна пластина" +msgstr "Гладка Холодна Пластина" msgid "Smooth High Temp Plate" +msgstr "Гладка Високотемпературна Пластина" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" @@ -9778,60 +11473,99 @@ msgstr "Кількість шарів для друку в іншій послі msgid "Other layers filament sequence" msgstr "Послідовність філаменту для інших шарів" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Типи ліжок, які підтримує принтер" msgid "Bottom shell layers" -msgstr "Суцільних шарів знизу" +msgstr "Шари нижньої оболонки" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" -"Це кількість суцільних шарів нижньої оболонки, включаючи нижній " -"поверхневийшар. Якщо товщина, розрахована за цим значенням, менша за товщину " -"нижньої оболонки, то шари нижньої оболонки будуть збільшені" +"Це кількість суцільних шарів нижньої оболонки, включаючи шар нижньої " +"поверхні. Якщо отримана товщина виявиться меншою за товщину нижньої " +"оболонки, кількість шарів нижньої оболонки буде збільшено" msgid "Bottom shell thickness" -msgstr "Товщина нижньої частини оболонки" +msgstr "Товщина нижньої оболонки" msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" -"Кількість нижніх суцільних шарів збільшується при розрізанні, якщо товщина, " -"обчислена шарами нижньої оболонки, тонше, ніж це значення. Це дозволяє " -"уникнути занадто тонкої оболонки при невеликій висоті шару. 0 означає, що ця " -"настройка вимкнена і товщина нижньої оболонки повністю обмеженашарами " -"нижньої оболонки" +"Якщо під час нарізання загальна товщина шарів нижньої оболонки виявиться " +"меншою за це значення, буде додано більше суцільних нижніх шарів. Це " +"дозволяє уникнути занадто тонкої оболонки при малій висоті шару. Якщо " +"значення 0, це налаштування вимкнено, і товщина нижньої оболонки " +"визначається лише кількістю шарів нижньої оболонки" msgid "Apply gap fill" -msgstr "Заповнення проміжків" +msgstr "Застосувати заповнення прогалин" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" -"Вмикає заповнення проміжків для вибраних поверхонь. Мінімальну довжину " -"проміжку, який буде заповнено, можна контролювати за допомогою опції " -"\"Відфільтрувати крихітні проміжки\" нижче.\n" +"Увімкнення заповнення проміжків для вибраних суцільних поверхонь. Мінімальну " +"довжину проміжку, що буде заповнена, можна контролювати за допомогою " +"параметра фільтрувати надто малі проміжки нижче.\n" "\n" "Параметри:\n" -"1. Скрізь: Застосовує заповнення проміжків до верхньої, нижньої та " -"внутрішніх суцільних поверхонь\n" -"2. Верхня та нижня поверхні: Застосовує заповнення лише до верхньої та " -"нижньої поверхонь\n" -"3. Ніде: Вимикає заповнення проміжків\n" +"\n" +"1. Усюди: застосовує заповнення проміжків до верхніх, нижніх і внутрішніх " +"суцільних поверхонь для максимальної міцності.\n" +"2. Верхні та нижні поверхні: застосовує заповнення проміжків лише до " +"верхньої та нижньої поверхонь, забезпечуючи баланс між швидкістю друку, " +"зменшуючи ймовірність надмірної екструзії в суцільному заповненні та " +"гарантуючи відсутність мікроскопічних отворів на верхніх і нижніх " +"поверхнях.\n" +"3. Ніде: вимикає заповнення проміжків для всіх суцільних заповнених " +"областей.\n" +"\n" +"Зверніть увагу: якщо використовується класичний генератор периметрів, " +"заповнення проміжків також може створюватися між периметрами, якщо між ними " +"не поміщається повноцінна лінія. Це заповнення проміжків між периметрами не " +"контролюється цим параметром.\n" +"\n" +"Якщо потрібно повністю вимкнути будь-яке заповнення проміжків, включно з " +"тим, що генерується класичним генератором периметрів, встановіть значення " +"параметра фільтрувати надто малі проміжки на велике число, наприклад, " +"999999.\n" +"\n" +"Однак це не рекомендується, оскільки заповнення проміжків між периметрами " +"сприяє міцності моделі. Для моделей, у яких між периметрами генерується " +"надмірне заповнення проміжків, кращим варіантом буде перемикання на " +"генератор стінок Arachne і використання цього параметра для керування тим, " +"чи буде створюватися косметичне заповнення проміжків на верхніх і нижніх " +"поверхнях" msgid "Everywhere" msgstr "Всюди" @@ -9842,129 +11576,325 @@ msgstr "Верхня та нижня поверхні" msgid "Nowhere" msgstr "Ніде" -msgid "Force cooling for overhang and bridge" -msgstr "Силове охолодження для звису та мосту" +msgid "Force cooling for overhangs and bridges" +msgstr "Примусове охолодження нависань та мостів" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"Увімкніть цю опцію, щоб оптимізувати швидкість вентилятора охолодженнядеталі " -"для звису та мосту, щоб покращити охолодження" +"Увімкніть цю опцію, щоб дозволити регулювання швидкості вентилятора " +"охолодження деталі спеціально для нависань, внутрішніх і зовнішніх мостів. " +"Налаштування швидкості вентилятора спеціально для цих елементів може " +"покращити загальну якість друку та зменшити викривлення." -msgid "Fan speed for overhang" -msgstr "Швидкість вентилятора для звису" +msgid "Overhangs and external bridges fan speed" +msgstr "Швидкість вентилятора нависань та зовнішніх мостів" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"Примусити вентилятор охолодження деталі працювати на цій швидкості під час " -"друку мостів або нависаючої стінки яка має великий кут нахилу. Примусове " -"охолодження для нависань та мостів може покращити якість друку для таких " -"деталей" +"Використовуйте цю швидкість вентилятора охолодження деталі під час друку " +"мостів або стінок з нависанням, якщо кут нависання перевищує значення, " +"встановлене в параметрі 'Поріг охолодження нависань' вище. Збільшення " +"охолодження спеціально для нависань і мостів може покращити загальну якість " +"друку цих елементів.\n" +"\n" +"Зверніть увагу, що ця швидкість вентилятора обмежена знизу мінімальним " +"порогом швидкості вентилятора, встановленим вище. Вона також може бути " +"збільшена до максимального порогу швидкості вентилятора, якщо не виконується " +"мінімальний час шару." -msgid "Cooling overhang threshold" -msgstr "Поріг охолоджувального звису" +msgid "Overhang cooling activation threshold" +msgstr "Поріг активації охолодження нависань" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"Коли ступінь звису друкарської деталі перевищує це значення, примусово " -"Встановіть вентилятор охолодження на певну швидкість. Виражається в " -"відсотках, що вказують на ширину лінії без опори від нижнього шару. .0%% " -"означає примусове охолодження всього зовнішньої стінки незалежно від ступеня " -"звису" +"Коли нависання перевищує вказаний поріг, змусити вентилятор працювати зі " +"швидкістю \"Швидкість вентилятора нависань\", встановленою нижче. Цей поріг " +"виражається у відсотках, вказуючи на частину ширини кожного лінії, яка не " +"підтримується шаром під нею. Встановлення цього значення на 0% змушує " +"вентилятор працювати для всіх зовнішніх периметрів, незалежно від кута " +"нависання." -msgid "Bridge infill direction" -msgstr "Напрямок заповнення мосту" +msgid "External bridge infill direction" +msgstr "Напрямок заповнення зовнішніх мостів" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "Перевизначення кута моста. Якщо залишити значення рівним нулю, кут моста " "обчислюватиметься автоматично. Інакше наданий кут використовуйте для " "зовнішніх мостів. Використовуйте 180 ° для нульового кута." -msgid "Bridge density" -msgstr "Щільність мосту" - -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "" -"Щільність зовнішніх мостів. 100% означає суцільний міст. Значення по за " -"замовчуванням - 100%." - -msgid "Bridge flow ratio" -msgstr "Потік мосту" +msgid "Internal bridge infill direction" +msgstr "Напрямок заповнення внутрішніх мостів" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." msgstr "" -"Трохи зменшіть це значення (наприклад, 0.9), щоб зменшити кількість " -"матеріалу для мосту, щоб покращити провисання" +"Перевизначення кута мостів. Якщо залишити значення рівним нулю, кут мостів " +"буде розраховано автоматично. В іншому випадку для внутрішніх мостів буде " +"використано заданий кут. Використовуйте 180° для нульового кута.\n" +"\n" +"Рекомендується залишати його на 0, якщо тільки це не є необхідним для " +"конкретної моделі." + +msgid "External bridge density" +msgstr "Щільність зовнішніх мостів" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Керує щільністю (відстанню) зовнішніх мостових ліній. 100% означає суцільний " +"міст. Типове значення - 100%.\n" +"\n" +"Менша щільність зовнішніх мостів може покращити надійність, оскільки " +"збільшується простір для циркуляції повітря навколо екструдованого мосту, що " +"сприяє швидшому охолодженню." + +msgid "Internal bridge density" +msgstr "Щільність внутрішніх мостів" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Керує щільністю (відстанню) внутрішніх ліній мостів. 100% означає суцільний " +"міст. Значення за замовчуванням – 100%.\n" +"\n" +"Мости з меншою щільністю можуть допомогти зменшити ефект здуття верхньої " +"поверхні та покращити надійність внутрішніх мостів, оскільки навколо " +"екструдованого моста залишається більше простору для циркуляції повітря, що " +"покращує його охолодження.\n" +"\n" +"Ця опція особливо ефективна в поєднанні з параметром друку другого " +"внутрішнього моста над заповненням, що ще більше покращує внутрішню " +"структуру мостів перед екструзією суцільного заповнення." + +msgid "Bridge flow ratio" +msgstr "Коефіцієнт потоку мостів" + +msgid "" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Зменште це значення трохи(наприклад 0.9) щоб зменшити кількість матеріалу " +"для мосту для покращення провисання.\n" +"\n" +"Фактичний потік матеріалу для мосту розраховується шляхом множення цього " +"значення на коефіцієнт потоку філамента і якщо встановлено, на коефіцієнт " +"потоку об'єкта." msgid "Internal bridge flow ratio" -msgstr "Коефіцієнт потоку для внутрішніх мостів" +msgstr "Коефіцієнт потоку внутрішніх мостів" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" -"Це значення визначає товщину внутрішнього мостовидного шару. Це перший шар " -"над внутрішнім заповненням. Зменшіть це значення (наприклад, до 0,9), щоб " -"покращити якість поверхні над внутрішнім заповненням." +"Це значення визначає товщину внутрішнього мостового шару. Це перший шар над " +"розрідженим заповненням.\n" +"Зменште це значення трохи (наприклад 0.9) щоб покращити якість поверхні над " +"розрідженим заповненням.\n" +"\n" +"Фактична подача матеріалу для внутрішнього мостового шару розраховується " +"шляхом множення цього значення на коефіцієнт подачі для мостів, коефіцієнт " +"подачі філаменту та, якщо встановлено, коефіцієнт подачі для об'єкта." msgid "Top surface flow ratio" msgstr "Коефіцієнт потоку верхньої поверхні" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Цей фактор впливає на кількість матеріалу для заповнення верхнього " -"твердоготіла. Можна трохи зменшити його, щоб отримати гладку " -"шорсткістьповерхні" +"Цей коефіцієнт впливає на кількість матеріалу для суцільного верхнього " +"заповнення. Ви можете трохи зменшити його, щоб отримати гладку поверхню.\n" +"\n" +"Фактичний потік матеріалу для верхньої поверхні обчислюється шляхом множення " +"цього значення на коефіцієнт подачі філаменту, а якщо встановлено, то й на " +"коефіцієнт подачі для об'єкта." msgid "Bottom surface flow ratio" msgstr "Коефіцієнт потоку нижньої поверхні" -msgid "This factor affects the amount of material for bottom solid infill" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Цей коефіцієнт впливає на кількість матеріалу для нижнього суцільного " +"заповнення.\n" +"\n" +"Фактичний потік матеріалу для нижнього суцільного заповнення обчислюється " +"шляхом множення цього значення на коефіцієнт подачі філаменту, а також, якщо " +"встановлено, на коефіцієнт подачі об'єкта." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" -"Цей фактор впливає на кількість матеріалу для заповнення нижнього " -"твердоготіла" msgid "Precise wall" msgstr "Точна стінка" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" -"Підвищуйте точність оболонки, регулюючи відстань між зовнішніми стінками. Це " -"також покращує консистенцію шару.\n" -"Примітка: Цей параметр набуде чинності, лише якщо послідовність стінок " -"налаштовано як Внутрішня-зовнішня" msgid "Only one wall on top surfaces" msgstr "Тільки одна стінка на верхніх поверхнях" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "" "Використовуйте лише одну стінку на плоскій верхній поверхні, щоб надати " -"більше місця для верхнього масиву заповнення" +"більше місця для верхнього заповнення" msgid "One wall threshold" msgstr "Поріг в одну стіну" @@ -9994,47 +11924,47 @@ msgstr "Тільки одна стінка на першому шарі" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "" "Використовувати лише одну стінку на першому шарі, щоб надати більше місця " "структурі нижнього заповнення" msgid "Extra perimeters on overhangs" -msgstr "Додаткові периметри при нависаннях" +msgstr "Додаткові периметри для нависань" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "" -"Створіть додаткові лінії друку по периметру над крутими виступами та " -"ділянками, де неможливо закріпити мости. " +"Створювати додаткові лінії по периметру друку над крутими нависаннями та в " +"зонах, де неможливо закріпити мости." -msgid "Reverse on odd" -msgstr "Зворотній на непарних" +msgid "Reverse on even" +msgstr "Зміна напрямку на парних шарах" msgid "Overhang reversal" -msgstr "Реверс звису" +msgstr "Розворот нависань" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"Екструдуйте периметри, які мають деталі над звисом, у зворотному напрямку на " -"непарних шарах. Таке чергування шаблонів може значно покращити круті " -"нависання.\n" +"Друкувати периметри, що містять частини над нависанням, у зворотному " +"напрямку на парних шарах. Таке чергування може суттєво покращити якість " +"друку крутих нависань.\n" "\n" -"Це налаштування також може допомогти зменшити деформацію деталі завдяки " -"зменшенню напружень у стінках деталі." +"Цей параметр також допомагає зменшити викривлення деталі, оскільки знижує " +"напруження у її стінках." msgid "Reverse only internal perimeters" msgstr "Реверс тільки внутрішніх периметрах" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -10043,32 +11973,32 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" -"Застосовуйте логіку зворотних периметрів тільки до внутрішніх периметрів. \n" +"Застосовувати логіку зворотних периметрів тільки до внутрішніх периметрів.\n" "\n" -"Це налаштування значно зменшує напруження деталі, оскільки вони " -"розподіляються в різних напрямках. Це повинно зменшити викривлення деталі, " -"зберігаючи при цьому якість зовнішньої стінки. Ця функція може бути дуже " +"Цей параметр значно зменшує напруження у деталях, оскільки вони тепер " +"розподіляються в чергуючихся напрямках. Це має зменшити деформацію деталей, " +"зберігаючи при цьому якість зовнішніх стінок. Ця функція може бути дуже " "корисною для матеріалів, схильних до деформації, таких як ABS/ASA, а також " -"для еластичних ниток, таких як TPU і Silk PLA. Вона також може допомогти " -"зменшити деформацію на пливучих ділянках над опорами.\n" +"для еластичних філаментів, наприклад, TPU і шовковистого PLA. Вона також " +"може допомогти зменшити деформацію на висячих областях над підтримками.\n" "\n" -"Щоб це налаштування було найефективнішим, рекомендується встановити Поріг " -"реверсу на 0, щоб усі внутрішні стінки друкувалися в поперемінному напрямку " -"на непарних шарах незалежно від ступеня їхнього вильоту." +"Щоб цей параметр був максимально ефективним, рекомендується встановити " +"'Reverse Threshold' у значення 0, щоб усі внутрішні стінки друкувалися в " +"чергуючихся напрямках на парних шарах незалежно від їхнього кута нависання." msgid "Bridge counterbore holes" -msgstr "Отвори для мостових стійок" +msgstr "Мости на цекованих отворах" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Ця опція створює перемички для зенкованих отворів, що дозволяє друкувати їх " "без підтримки. Доступні наступні режими\n" @@ -10086,160 +12016,214 @@ msgid "Reverse threshold" msgstr "Зворотний поріг" msgid "Overhang reversal threshold" -msgstr "Поріг розвороту звису" +msgstr "Поріг розвороту нависань" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"Кількість мм вильоту, який повинен бути для того, щоб розворот вважався " -"корисним. Може бути % від ширини периметра.\n" -"Значення 0 вмикає розворот на всіх непарних шарах незалежно від цього." - -msgid "Classic mode" -msgstr "Класичний режим" - -msgid "Enable this option to use classic mode" -msgstr "Увімкнути цей параметр для використання класичного режиму" +"Кількість міліметрів, на які повинно виступати нависання, щоб реверсування " +"вважалося корисним. Може бути задано як відсоток від ширини периметра.\n" +"Значення 0 увімкне реверсування на кожному парному шарі незалежно від умов.\n" +"Якщо параметр 'Виявлення стінки з нависанням' не увімкнено, цей параметр " +"ігнорується, і реверсування відбувається на кожному парному шарі незалежно." msgid "Slow down for overhang" -msgstr "Уповільнення звису" +msgstr "Сповільнюватись для нависань" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "" -"Увімкнути цей параметр для уповільнення друку при різних ступенях звису" +"Увімкнути цей параметр для уповільнення друку при різних кутів нависань" msgid "Slow down for curled perimeters" msgstr "Уповільнення для нависаючих периметрів" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." msgstr "" -"Увімкніть цей параметр, щоб сповільнити друк у зонах, де можуть існувати " -"потенційно нависаючі периметри" +"Увімкніть цю опцію, щоб уповільнити друк у зонах, де периметри можуть " +"загортатися вгору. \n" +"\n" +"**Наприклад, додаткове зниження швидкості застосовується при друку нависань " +"на гострих кутах, таких як передня частина корпусу Benchy. Це допомагає " +"зменшити загортання, яке може накопичуватися з кожним шаром.** \n" +"\n" +"**Зазвичай рекомендується залишати цю опцію увімкненою, якщо тільки ваш " +"принтер не має достатньо потужного охолодження або швидкість друку не є " +"настільки низькою, щоб уникнути загортання периметрів. Якщо ви друкуєте на " +"високій швидкості зовнішніх периметрів, це налаштування може спричинити " +"незначні артефакти через різку зміну швидкості друку. Якщо ви помітили такі " +"артефакти, переконайтеся, що калібрування компенсації тиску (pressure " +"advance) виконано правильно.** \n" +"\n" +"**Примітка:** Коли ця опція увімкнена, периметри нависань обробляються так " +"само, як звичайні нависання. Це означає, що буде застосована швидкість друку " +"для нависань, навіть якщо нависаючий периметр є частиною мосту. Наприклад, " +"якщо периметри нависають на 100% без опори знизу, буде застосована " +"відповідна швидкість для 100% нависань." msgid "mm/s or %" msgstr "мм/с або %" -msgid "External" -msgstr "Зовнішні" - -msgid "Speed of bridge and completely overhang wall" -msgstr "Швидкість мосту і периметр, що повністю звисає" - -msgid "mm/s" -msgstr "мм/с" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Швидкість екструзії мостів, які видно ззовні.\n" +"\n" +"Крім того, якщо параметр 'Уповільнення для закручених периметрів' вимкнено " +"або увімкнено 'Класичний режим нависань', ця швидкість буде " +"використовуватися для друку стінок з нависанням, які підтримуються менш ніж " +"на 13%, незалежно від того, чи є вони частиною мосту або звичайного " +"нависання." msgid "Internal" msgstr "Внутрішні" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"Швидкість внутрішнього мосту. Якщо значення виражено у відсотках, воно буде " -"розраховано на основі bridge_speed. Значення за замовчуванням - 150%." +"Швидкість внутрішніх мостів. Якщо значення вказано у відсотках, воно буде " +"розраховане на основі bridge_speed. Значення за замовчуванням: 150%." msgid "Brim width" msgstr "Ширина кайми" -msgid "Distance from model to the outermost brim line" -msgstr "Відстань від моделі до крайньої лінії кайми" +msgid "Distance from model to the outermost brim line." +msgstr "Відстань від моделі до останньої зовнішньої лінії кайми" msgid "Brim type" msgstr "Тип кайми" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"Це керує формуванням поля на зовнішній та/або внутрішній сторонімоделей. " -"Auto означає, що ширина поля аналізується та обчислюється автоматично." +"Керує генерацією кайми на зовнішніх та/або внутрішніх сторонах моделей. Авто " +"означає, що ширина кайми аналізується та визначається автоматично." msgid "Brim-object gap" msgstr "Зазор між каймою та об'єктом" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "" -"Зазор між внутрішньою лінією кайми та предметом може сприяти легшому зняттю " -"кайми" +"Зазор між першою внутрішньою лінією кайми та об'єктом може сприяти легшому " +"відокремленню кайми" msgid "Brim ears" -msgstr "Кайма вушка" +msgstr "Вушка кайми" msgid "Only draw brim over the sharp edges of the model." -msgstr "Робить кайму вушка лише на гострих краях моделі." +msgstr "Генерувати кайму лише на гострих краях моделі." msgid "Brim ear max angle" -msgstr "Максимальний кут для кайми вушка" +msgstr "Максимальний кут вушка кайми" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"Максимальний кут, під яким з'являється кайма вушко. \n" -"Якщо встановлено на 0, то край не буде створено. \n" -"Якщо встановлено ~180, то край буде створено на всіх ділянках, окрім прямих." +"Максимальний кут, за якого з'являється вушко кайми.\n" +"Якщо встановлено на 0, кайма не буде створена.\n" +"Якщо встановлено ~180, то кайма буде створена на всіх ділянках, окрім прямих." msgid "Brim ear detection radius" -msgstr "Кайма вушка радіус виявлення" +msgstr "Радіус виявлення вушка кайма" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "Геометрія буде оброблена перед детектуванням гострих кутів. Цей параметр " "вказує мінімальну довжину відхилення для обробки.\n" "0 для вимкнення" -msgid "Compatible machine" -msgstr "Сумісна машина" +msgid "Select printers" +msgstr "" msgid "upward compatible machine" msgstr "висхідна сумісна машина" -msgid "Compatible machine condition" -msgstr "Сумісний стан машини" +msgid "Condition" +msgstr "" -msgid "Compatible process profiles" -msgstr "Сумісні профілі процесів" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Логічний вираз, що використовує значення конфігурації активного профілю " +"принтера. Якщо цей вираз оцінюється як Правда, цей профіль вважається " +"сумісним з активним профілем принтера." -msgid "Compatible process profiles condition" -msgstr "Стан сумісних профілів процесів" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Логічний вираз, що використовує значення конфігурації активного профілю " +"друку. Якщо цей вираз оцінюється як Правда, цей профіль вважається сумісним " +"з активним профілем друку." + +msgid "Print sequence, layer by layer or object by object." msgstr "Послідовність друку, шар за шаром або об'єкт за об'єктом" msgid "By layer" -msgstr "За шаром" +msgstr "Пошарово" msgid "By object" -msgstr "По об'єкту" +msgstr "Кожен об'єкт окремо" msgid "Intra-layer order" msgstr "Внутрішній порядок шарів" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "Друк замовлення в один шар" msgid "As object list" -msgstr "Як перелік об'єктів" +msgstr "За порядком у списку" msgid "Slow printing down for better layer cooling" -msgstr "Повільний друк для кращого охолодження шару" +msgstr "Сповільнювати друк для кращого охолодження шару" msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "Увімкніть цю опцію, щоб уповільнити швидкість друку та зробити кінцевий час " "шару не коротше порога часу шару в \"Max fan speed threshold\", щоб шар міг " @@ -10251,24 +12235,21 @@ msgstr "Звичайний друк" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "" "Прискорення за умовчанням як для звичайного друку, так і для переміщення за " -"виключенням початкового шару" - -msgid "mm/s²" -msgstr "мм/с²" +"виключенням першого шару" msgid "Default filament profile" msgstr "Профіль стандартного філаменту" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "Профіль стандартного філаменту при перемиканні на цей профіль машини" msgid "Default process profile" msgstr "Профіль за промовчанням" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "Профіль за промовчанням при перемиканні на цей профіль машини" msgid "Activate air filtration" @@ -10282,21 +12263,21 @@ msgid "Fan speed" msgstr "Швидкість вентилятора" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "" "Швидкість вентилятора відсмоктування під час друку. Ця швидкість перезапише " "швидкість у користувацькому G-коді філаменту" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "Швидкість витяжного вентилятора після завершення друку" msgid "No cooling for the first" -msgstr "Немає охолодження для першого шару" +msgstr "Не охолоджувати перші" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "Вимкнути всі вентилятори охолодження для певної кількості перших шарів. " "Вентилятор охолодження першого шару зазвичай вимкнений, щоб покращити " @@ -10306,14 +12287,14 @@ msgid "Don't support bridges" msgstr "Не підтримувати мости" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "Не підтримуйте всю площу мосту, тому що підтримка буде дуже великою.Міст\n" "зазвичай можна друкувати безпосередньо без підтримки, якщо не дуже довго" -msgid "Thick bridges" -msgstr "Товсті мости" +msgid "Thick external bridges" +msgstr "Товсті зовнішні мости" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10336,75 +12317,139 @@ msgstr "" "рекомендується вмикати цю функцію. Однак, якщо ви використовуєте великі " "сопла, краще вимкнути її." -msgid "Don't filter out small internal bridges (beta)" -msgstr "Не відфільтровувати маленькі внутрішні мости (бета)" +msgid "Extra bridge layers (beta)" +msgstr "Додаткові шари мостів (бета)" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"Ця опція може допомогти зменшити подушку на верхніх поверхнях у сильно " -"нахилених або вигнутих моделях.\n" +"Ця опція увімкне створення додаткового мостового шару над внутрішніми та/або " +"зовнішніми мостами.\n" "\n" -"За замовчуванням невеликі внутрішні містки відфільтровуються, а внутрішня " -"суцільна заливка друкується безпосередньо поверх внутрішнього заповнення. У " -"більшості випадків це добре працює, прискорюючи друк без надто великого " -"компромісу з якістю верхньої поверхні.\n" +"Додаткові мостові шари покращують вигляд і надійність мостів, оскільки " +"суцільне заповнення отримує кращу підтримку. Це особливо корисно для " +"швидкісних принтерів, де швидкості друку мостів і суцільного заповнення " +"значно відрізняються. Додатковий мостовий шар зменшує ефект хвилястості на " +"верхніх поверхнях, а також знижує ризик відокремлення зовнішнього мостового " +"шару від його периметрів.\n" "\n" -"Однак у сильно нахилених або вигнутих моделях, особливо якщо " -"використовується надто низька щільність внутрішнього заповнення, це може " -"призвести до скручування непідтримуваного суцільного заповнення, що " -"спричиняє \"подушку\".\n" +"Зазвичай рекомендується встановлювати значення щонайменше 'Тільки зовнішні " +"мости', якщо не виявлено специфічних проблем у нарізаній моделі.\n" "\n" -"Увімкнення цього параметра призведе до друку внутрішнього мостового шару над " -"злегка непідтримуваним внутрішнім суцільним заповненням. Наведені нижче " -"опції контролюють кількість фільтрації, тобто кількість створених внутрішніх " -"мостів.\n" -"\n" -"Вимкнено - вимикає цей параметр. Це поведінка за замовчуванням, яка добре " -"працює у більшості випадків.\n" -"\n" -"Обмежена фільтрація - створює внутрішні мости на сильно нахилених поверхнях, " -"уникаючи створення зайвих проміжних мостів. Це добре працює для більшості " -"складних моделей.\n" -"\n" -"Без фільтрації - створює внутрішні мости на кожному потенційному " -"внутрішньому виступі. Цей параметр корисний для моделей з сильно нахиленою " -"верхньою поверхнею. Однак, у більшості випадків він створює занадто багато " -"непотрібних перемичок." +"Опції:\n" +"1. Вимкнено - не створює другий містовий шар. Це значення встановлено за " +"замовчуванням для забезпечення сумісності.\n" +"2. Тільки зовнішні мости - створює другий містовий шар лише для зовнішніх " +"мостів. Зверніть увагу, що малі мости, які коротші або вужчі за задану " +"кількість периметрів, будуть пропущені, оскільки для них другий містовий шар " +"не буде корисним. Якщо другий містовий шар буде створений, він буде " +"екструдований паралельно до першого, щоб підвищити міцність мосту.\n" +"3. Тільки внутрішні мости - створює другий містовий шар лише для внутрішніх " +"мостів над розрідженим заповненням. Врахуйте, що внутрішні мости " +"враховуються в загальній кількості верхніх оболонок вашої моделі. Другий " +"внутрішній містовий шар буде екструдований якомога ближче до перпендикуляра " +"до першого. Якщо в одній області острова присутні кілька зон з різними " +"кутами мостів, остання зона цього острова буде використовуватися як " +"еталонний кут.\n" +"4. Застосовувати до всіх - створює другий містовий шар для внутрішніх і " +"зовнішніх мостів\n" msgid "Disabled" msgstr "Вимкнено" +msgid "External bridge only" +msgstr "Тільки зовнішні мости" + +msgid "Internal bridge only" +msgstr "Тільки внутрішні мости" + +msgid "Apply to all" +msgstr "Застосовувати до всіх" + +msgid "Filter out small internal bridges" +msgstr "Відфільтровувати маленькі внутрішні мости" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Ця опція може допомогти зменшити утворення ефект зморщування верхнього шару " +"на верхніх поверхнях у моделях із сильним нахилом або вигнутими формами.\n" +"За замовчуванням малі внутрішні мости відфільтровуються, і внутрішнє " +"суцільне заповнення друкується безпосередньо поверх розрідженого заповнення. " +"У більшості випадків це працює добре, прискорюючи друк без значного " +"погіршення якості верхньої поверхні.\n" +"Однак у моделях із сильним нахилом або вигнутими формами, особливо якщо " +"використовується занадто низька щільність розрідженого заповнення, це може " +"призвести до загортання незакріпленого суцільного заповнення, викликаючи " +"зморщування.\n" +"Увімкнення обмеженої фільтрації або її відключення дозволить друкувати " +"внутрішні шари мостів поверх злегка незакріпленого внутрішнього суцільного " +"заповнення. Нижче наведені параметри контролю чутливості фільтрації, тобто " +"вони визначають, де створюватимуться внутрішні мости.\n" +"1. Фільтрація - увімкнення цієї опції. Це поведінка за замовчуванням, яка " +"добре працює в більшості випадків.\n" +"2. Обмежена фільтрація - створює внутрішні мости на сильно нахилених " +"поверхнях, уникаючи зайвих мостів. Це добре підходить для складних моделей.\n" +"3. Без фільтрації - створює внутрішні мости на кожному потенційному " +"внутрішньому нависанні. Цей параметр корисний для моделей із сильно " +"нахиленою верхньою поверхнею, однак у більшості випадків створює занадто " +"багато зайвих мостів." + msgid "Limited filtering" -msgstr "Обмежена фільтрація" +msgstr "Обмежене фільтрування" msgid "No filtering" -msgstr "Без фільтрації" +msgstr "Без фільтрування" msgid "Max bridge length" msgstr "Максимальна довжина мосту" @@ -10421,24 +12466,24 @@ msgstr "" msgid "End G-code" msgstr "Завершальний G-code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "Завершальний G-code, коли закінчити весь друк" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "Між G-кодами об’єктів" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." msgstr "" "Вставити G-код між об’єктами. Цей параметр буде врахований лише тоді, коли " "ви друкуєте свої моделі по об’єктах" -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "Завершальний G-code, коли закінчите друк цієї нитки" msgid "Ensure vertical shell thickness" -msgstr "Забезпечення вертикальної товщини оболонки" +msgstr "Забезпечити вертикальну товщину оболонки" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " @@ -10460,22 +12505,16 @@ msgstr "" "Значення за замовчуванням - Усі." msgid "Critical Only" -msgstr "Тільки критично" +msgstr "Тільки критичні" msgid "Moderate" msgstr "Помірно" msgid "Top surface pattern" -msgstr "Малюнок верхньої поверхні" +msgstr "Шаблон верхньої поверхні" -msgid "Line pattern of top surface infill" -msgstr "Малюнок заповнення верхньої поверхні" - -msgid "Concentric" -msgstr "Концентричний" - -msgid "Rectilinear" -msgstr "Прямолінійний" +msgid "Line pattern of top surface infill." +msgstr "Шаблон ліній заповнення верхньої поверхні" msgid "Monotonic" msgstr "Монотонний" @@ -10483,9 +12522,15 @@ msgstr "Монотонний" msgid "Monotonic line" msgstr "Монотонний прямолінійний" +msgid "Rectilinear" +msgstr "Прямолінійний" + msgid "Aligned Rectilinear" msgstr "Вирівняний прямолінійний" +msgid "Concentric" +msgstr "Концентричний" + msgid "Hilbert Curve" msgstr "Крива Гільберта" @@ -10496,21 +12541,21 @@ msgid "Octagram Spiral" msgstr "Спіральна октограма" msgid "Bottom surface pattern" -msgstr "Малюнок нижньої поверхні" +msgstr "Шаблон нижньої поверхні" -msgid "Line pattern of bottom surface infill, not bridge infill" -msgstr "Малюнок заповнення нижньої поверхні, а не заповнення мосту" +msgid "Line pattern of bottom surface infill, not bridge infill." +msgstr "Шаблон ліній заповнення нижньої поверхні, крім заповнення мостів" msgid "Internal solid infill pattern" -msgstr "Внутрішній малюнок заповнення суцільними шарами" +msgstr "Шаблон внутрішнього суцільного заповнення" msgid "" "Line pattern of internal solid infill. if the detect narrow internal solid " "infill be enabled, the concentric pattern will be used for the small area." msgstr "" -"Лінійний шаблон внутрішньої суцільної заливки. якщо увімкнено функцію " -"виявлення вузької внутрішньої суцільної заливки, для невеликих ділянок буде " -"використано концентричний шаблон." +"Шаблон ліній внутрішнього суцільного заповнення. Якщо увімкнено функцію " +"виявлення вузького внутрішнього суцільного заповнення, для невеликих ділянок " +"буде використано концентричний шаблон." msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " @@ -10546,7 +12591,7 @@ msgid "Small perimeters threshold" msgstr "Поріг малих периметрів" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "" "При цьому встановлюється поріг для невеликої довжини периметра. Порігове за " "замовчуванням - 0 мм" @@ -10555,10 +12600,10 @@ msgid "Walls printing order" msgstr "Послідовність друку стінок" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10568,17 +12613,15 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" -"Послідовність друку внутрішніх (inner) та зовнішніх (outer) стін. \n" +"Послідовність друку внутрішніх (inner) та зовнішніх (outer) стін.\n" "\n" "Використовуйте внутрішню/зовнішню для найкращих виступів. Це пов'язано з " "тим, що стіни, які виступають, можуть прилипати до сусіднього периметра під " @@ -10594,7 +12637,7 @@ msgstr "" "щонайменше 3 стіни, оскільки спочатку друкуються внутрішні стіни, починаючи " "з 3-го периметра, потім зовнішній периметр і, нарешті, перший внутрішній " "периметр. У більшості випадків цей параметр рекомендується використовувати " -"замість параметра Зовнішній/Внутрішній. \n" +"замість параметра Зовнішній/Внутрішній.\n" "\n" "Використовуйте опцію Зовнішня/Внутрішня для отримання такої ж якості " "зовнішньої стіни і точності розмірів, як і в опції Внутрішня/Зовнішня/" @@ -10618,11 +12661,19 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" +"Порядок друку стінок і заповнення. Якщо прапорець не встановлено, стінки " +"друкуються першими, що є оптимальним варіантом у більшості випадків.\n" +"\n" +"Друк заповнення перед стінками може допомогти при екстремальних нависаннях, " +"оскільки стінки матимуть сусіднє заповнення для кращого зчеплення. Однак " +"заповнення буде злегка виштовхувати надруковані стінки в місцях їхнього " +"з'єднання, що може погіршити якість зовнішньої поверхні. Також це може " +"спричинити просвічування заповнення крізь зовнішні поверхні деталі." msgid "Wall loop direction" msgstr "Напрямок контуру стінки" @@ -10632,20 +12683,19 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"Напрямок, в якому екструдуються периметри стінок, якщо дивитися зверху " -"вниз.\n" +"Напрямок, у якому екструдуються петлі стінки при погляді зверху вниз.\n" "\n" -"За замовчуванням усі стінки екструдуються проти годинникової стрілки, якщо " -"тільки не увімкнено Реверс по непарних периметрах. Якщо встановити будь-яку " -"іншу опцію, окрім Авто, то напрямок друку стінки буде визначатися незалежно " -"від значення Реверс по непарних периметрах.\n" +"За замовчуванням всі стінки екструдуються проти годинникової стрілки, якщо " +"тільки не увімкнено 'Реверсування на парних'. Встановлення цього параметра " +"на будь-яке значення, окрім 'Auto', примусово задасть напрямок стінки " +"незалежно від 'Реверсування на парних'.\n" "\n" -"Ця опція буде вимкнена, якщо увімкнено режим Спіральної вази." +"Цей параметр буде вимкнено, якщо увімкнено режим \"спіральної вази\"." msgid "Counter clockwise" msgstr "Проти годинникової стрілки" @@ -10752,10 +12802,13 @@ msgstr "" "Цей параметр визначає додаткову відстань, на яку слід розширити площу " "адаптивної сітки в напрямках XY." +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "Колір екструдера" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "Використовується лише як візуальна допомога в інтерфейсі користувача" msgid "Extruder offset" @@ -10764,12 +12817,13 @@ msgstr "Зміщення екструдера" msgid "Flow ratio" msgstr "Коефіцієнт потоку" +#, fuzzy msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "Матеріал може мати об'ємну зміну після перемикання між розплавленим станом " "та кристалічним станом. Це налаштування пропорційно змінює весь екструзійний " @@ -10777,19 +12831,176 @@ msgstr "" "0,95 до 1,05. Можливо, ви можете налаштувати це значення, щоб отримати " "хорошу плоску поверхню, коли є невелике переповнення або недолив" +#, fuzzy +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Матеріал може змінювати об'єм після переходу між розплавленим і кристалічним " +"станом.\n" +"Цей параметр пропорційно змінює весь потік екструзії для цього філаменту в G-" +"code.Рекомендований діапазон значень – від 0.95 до 1.05. Ви можете " +"налаштувати це значення, щоб отримати рівну поверхню в разі незначного " +"переплаву або недоплаву.\n" +"\n" +"Підсумковий коефіцієнт потоку об'єкта дорівнює цьому значенню, помноженому " +"на коефіцієнт потоку філаменту." + msgid "Enable pressure advance" msgstr "Увімкнути випередження тиску PA" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "" -"Включити випередження тиску, результат автоматичного калібрування " -"будеперезаписано після увімкнення." +"Включити випередження тиску, результат автоматичного калібрування буде " +"перезаписано після увімкнення." -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "" -"Підвищення тиску (Klipper) AKA Коефіцієнт лінійного просування (Marlin)" +"Випередження тиску (Klipper) або Коефіцієнт лінійного випередження (Marlin)" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Увімкнути адаптивне випередження тиску (бета)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Зі збільшенням швидкості друку (а отже, і збільшенням об'ємного потоку через " +"сопло) та зростанням прискорень спостерігається, що ефективне значення PA " +"зазвичай зменшується. Це означає, що одне значення PA не завжди є 100% " +"оптимальним для всіх елементів, і зазвичай використовується компромісне " +"значення, яке не спричиняє надмірного здуття на елементах із нижчою " +"швидкістю потоку та прискореннями, але водночас не створює проміжків на " +"швидших елементах.\n" +"\n" +"Ця функція покликана усунути це обмеження, моделюючи реакцію екструзійної " +"системи принтера залежно від швидкості об'ємного потоку та прискорення під " +"час друку. Внутрішньо вона створює адаптовану модель, яка може " +"екстраполювати необхідний параметр попереднього тиску для будь-якої заданої " +"швидкості об'ємного потоку та прискорення, а потім передавати його на " +"принтер відповідно до поточних умов друку.\n" +"\n" +"Якщо функцію увімкнено, значення попереднього тиску, зазначене вище, буде " +"замінене. Однак настійно рекомендується вказати розумне значення за " +"замовчуванням, яке діятиме як резервне і використовуватиметься під час зміни " +"інструменту.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Виміри адаптивного випередження тиску (бета)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Додайте набори значень корекції тиску (PA), об'ємних швидкостей подачі та " +"прискорень, при яких вони були виміряні, розділені комами. Один набір " +"значень на рядок. Наприклад:\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Як виконати калібрування:\n" +"1. Виконайте тест корекції тиску принаймні для 3 швидкостей на кожне " +"значення прискорення. Рекомендується запускати тест щонайменше для швидкості " +"зовнішніх периметрів, швидкості внутрішніх периметрів і максимальної " +"швидкості друку у вашому профілі (зазвичай це розріджене або суцільне " +"заповнення). Потім повторіть тест для тих самих швидкостей на мінімальному " +"та максимальному значенні прискорення друку, але не вище за рекомендоване " +"максимальне прискорення, визначене в Klipper input shaper.\n" +"2. Запишіть оптимальне значення PA для кожної об'ємної швидкості подачі та " +"прискорення. Ви можете знайти значення подачі, вибравши \"Flow\" у " +"випадаючому списку колірної схеми та пересуваючи горизонтальний повзунок по " +"лініях шаблону PA. Значення повинне відображатися внизу сторінки. Ідеальне " +"значення PA має зменшуватися зі збільшенням об'ємної швидкості подачі. Якщо " +"це не так, переконайтеся, що ваш екструдер працює коректно. Чим повільніше " +"друкуєте і з меншим прискоренням, тим ширший діапазон допустимих значень PA. " +"Якщо різниця не помітна, використовуйте значення PA із швидшого тесту.\n" +"3. Введіть трійки значень PA, Flow і Acceleration у це текстове поле та " +"збережіть профіль філамента." + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Увімкнути адаптивне випередження тиску для нависань (бета)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Увімкнути адаптивний PA для нависань, а також у випадках зміни подачі " +"матеріалу в межах однієї деталі. Це експериментальний параметр, оскільки, " +"якщо профіль PA налаштований неточно, це може спричинити проблеми з " +"рівномірністю зовнішніх поверхонь до і після нависань.\n" + +msgid "Pressure advance for bridges" +msgstr "Випередження тиску для мостів" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Значення випередження тиску для мостів. Встановіть 0, щоб вимкнути.\n" +"\n" +"Нижче значення випередження тиску при друкуванні мостів допомагає зменшити " +"прояви незначної недоекструзії одразу після друку мостів. Це спричинено " +"падінням тиску в соплі під час друку в повітрі, і зменшене значення " +"випередження тиску допомагає це компенсувати." msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " @@ -10799,11 +13010,12 @@ msgstr "" "виражено у %, вона буде розрахована за діаметром сопла." msgid "Keep fan always on" -msgstr "Тримайте вентилятор завжди увімкненим" +msgstr "Тримати вентилятор завжди увімкненим" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "Якщо увімкнути цей параметр, вентилятор охолодження деталі ніколи не " "будезупинятиметься і працюватиме\n" @@ -10816,14 +13028,20 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"Якщо увімкнено, цей параметр гарантуватиме, що зовнішні периметри не " +"сповільнюються для дотримання мінімального часу шару. Це особливо корисно в " +"наступних випадках:\n" +"1. Для запобігання змінам блиску під час друку глянцевими філаментами\n" +"2. Щоб уникнути змін у швидкості друку зовнішніх стінок, які можуть " +"спричинити незначні дефекти, схожі на Z-ефект\n" +"3. Щоб уникнути друку на швидкостях, які спричиняють VFAs (дрібні артефакти) " +"на зовнішніх стінках" msgid "Layer time" msgstr "Час шару" @@ -10831,7 +13049,7 @@ msgstr "Час шару" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "Вентилятор охолодження деталі буде включений для шарів, розрахунковий " "часяких менше цього значення. Швидкість вентилятора інтерполюється між " @@ -10841,8 +13059,10 @@ msgstr "" msgid "Default color" msgstr "Колір за замовчуванням" -msgid "Default filament color" -msgstr "Колір філаменту за замовчуванням" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "Примітки щодо філаменту" @@ -10860,47 +13080,114 @@ msgstr "" "Мінімальний HRC сопла, необхідний для друку філаменту. Нуль означає " "відсутність перевірки HRC сопла." +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "Це налаштування визначає, скільки обсягу нитки може бути розплавлено та " "екструдовано за секунду. Швидкість друку обмежена максимальною об'ємною " "швидкістю, у разі надто високого та необґрунтованого налаштування швидкості. " "Не може бути нулем" -msgid "mm³/s" -msgstr "мм³/с" - msgid "Filament load time" msgstr "Час завантаження філаменту" -msgid "Time to load new filament when switch filament. For statistics only" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." msgstr "" -"Час завантаження нового філаменту при перемиканні філаменту. Тільки для " -"статистики" +"Час завантаження нового філамента при його зміні. Зазвичай застосовується " +"для одноекструдерних принтерів з підтримкою багатоматеріального друку. Для " +"систем із заміною інструментів або багатоголовкових машин зазвичай дорівнює " +"0. Використовується лише для статистики" msgid "Filament unload time" msgstr "Час вивантаження філаменту" -msgid "Time to unload old filament when switch filament. For statistics only" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"Час вивантаження старого філаменту під час зміни філаменту. Зазвичай " +"застосовується для одноекструдерних багатоматеріальних машин. Для змінників " +"інструментів або багатоголовкових машин зазвичай становить 0. " +"Використовується лише для статистики" + +msgid "Tool change time" msgstr "" -"Час вивантаження нового філаменту при перемиканні філаменту. Тільки для " -"статистики" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." msgstr "" -"Діаметр нитки використовується для розрахунку екструзії в gcode, тому він " -"важливий імає бути точним" +"Час, необхідний для перемикання інструментів. Зазвичай застосовується для " +"змінників інструментів або багатофункціональних машин. Для одноекструдерних " +"машин з підтримкою кількох матеріалів зазвичай становить 0. Використовується " +"лише для статистики" + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +#, fuzzy +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"Діаметр філаменту використовується для розрахунку екструзії в gcode, тому " +"він важливий і має бути точним" msgid "Pellet flow coefficient" -msgstr "" +msgstr "Коефіцієнт потоку гранул" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10908,14 +13195,33 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"Коефіцієнт потоку гранул визначається емпірично і дозволяє виконувати " +"розрахунок об'єму для гранульних принтерів.\n" +"\n" +"Внутрішньо він конвертується у діаметр філамента. Всі інші розрахунки об'єму " +"залишаються незмінними.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" -msgstr "Усадка" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Усадка (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -10927,31 +13233,50 @@ msgstr "" "Переконайтеся, що між об'єктами достатньо місця, оскільки ця компенсація " "виконується після перевірки." +msgid "Shrinkage (Z)" +msgstr "Усадка (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Введіть відсоток усадки, якого зазнає філамент після охолодження (94%, якщо " +"виміряне значення становить 94 мм замість 100 мм). Деталь буде масштабована " +"по осі Z для компенсації." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" -msgstr "Швидкість заведення" +msgstr "Швидкість завантаження" msgid "Speed used for loading the filament on the wipe tower." msgstr "" -"Швидкість, що використовується для заведення філаменту на вежі витирання." +"Швидкість, що використовується для видавлення філаменту на вежу протирання." msgid "Loading speed at the start" -msgstr "Швидкість заведення на старті" +msgstr "Швидкість завантаження на старті" msgid "Speed used at the very beginning of loading phase." msgstr "Швидкість, що використовується на самому початку фази заведення." msgid "Unloading speed" -msgstr "Швидкість виведення" +msgstr "Швидкість вивантаження" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" -"Швидкість, яка використовується для виведення філаменту на вежі витирання " +"Швидкість, яка використовується для видавлення філаменту на вежі протирання " "(не впливає на початкову частину виведення безпосередньо після раммінгу)." msgid "Unloading speed at the start" -msgstr "Швидкість виведення на старті" +msgstr "Швидкість вивантаження на старті" msgid "" "Speed used for unloading the tip of the filament immediately after ramming." @@ -10963,8 +13288,8 @@ msgid "Delay after unloading" msgstr "Затримка після виведення" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "Час очікування після виведення філаменту. Може допомогти отримати надійну " @@ -10981,6 +13306,24 @@ msgstr "" "Філамент охолоджується шляхом переміщення вперед-назад у охолоджувальних " "трубках. Вкажіть бажану кількість цих рухів." +msgid "Stamping loading speed" +msgstr "Швидкість завантаження штампування" + +msgid "Speed used for stamping." +msgstr "Швидкість, що використовується для штампування." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Відстань штампування, виміряна від центру охолоджувальної трубки" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Якщо встановлено ненульове значення, філамент подається до сопла між " +"окремими рухами охолодження (\"штампування\"). Цей параметр визначає, як " +"довго має тривати цей рух, перш ніж філамент буде знову втягнутий." + msgid "Speed of the first cooling move" msgstr "Швидкість першого охолоджуючого руху" @@ -10989,7 +13332,7 @@ msgstr "" "Охолоджувальні рухи поступово прискорюються, починаючи з цієї швидкості." msgid "Minimal purge on wipe tower" -msgstr "Мінімальне продування на очисній вежі" +msgstr "Мінімальне очищення на вежі протирання" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -11011,15 +13354,6 @@ msgstr "Швидкість останнього охолоджуючого ру msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Охолоджувальні рухи поступово прискорюються до цієї швидкості." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Час для прошивки принтера (або Multi Material Unit 2.0), щоб завести новий " -"філамент під час заміни інструменту (під час виконання коду Т). Цей час " -"додається до загального часу друку за допомогою оцінювача часу G-коду." - msgid "Ramming parameters" msgstr "Параметри раммінгу" @@ -11030,23 +13364,14 @@ msgstr "" "Цей рядок відредаговано у діалогу налаштувань раммінгу та містить певні " "параметри раммінгу." -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Час для прошивки принтера (або Multi Material Unit 2.0), щоб вивести " -"філамент під час заміни інструменту (під час виконання коду Т). Цей час " -"додається до загального часу друку за допомогою оцінювача часу G-коду." - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "Увімкнути накат для багатоінструментальних установок" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "Виконати накат при використанні багатофункціонального принтера (тобто, коли " "в налаштуваннях принтера знято прапорець з опції \"Мультиматеріал для одного " @@ -11054,51 +13379,62 @@ msgstr "" "екструдується на витиральні башти безпосередньо перед зміною інструменту. " "Цей параметр використовується лише тоді, коли увімкнено витиральні башти." -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "Об'єм накату багатофункціонального інструменту" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "Об'єм, який потрібно виштовхнути перед зміною інструменту." -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "Багатоінструментальний потік накату" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "Потік використовується для накату нитки перед зміною інструменту." msgid "Density" msgstr "Щільність" -msgid "Filament density. For statistics only" -msgstr "Щільність нитки. Тільки для статистики" +msgid "Filament density. For statistics only." +msgstr "Щільність філаменту. Тільки для статистики" -msgid "g/cm³" -msgstr "г/см³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "Тип матеріалу філаменту" msgid "Soluble material" -msgstr "Розчинний філамент" +msgstr "Розчинний матеріал" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "Розчинний матеріал зазвичай використовується для друку підтримки" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "Матеріал підтримки" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "Допоміжний матеріал зазвичай використовується для друку підтримки" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "Температура розм'якшення" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "Матеріал м’якшує при цій температурі, тому, коли температура столу рівна або " "вища за цей показник, настійно рекомендується відкрити передні двері та/або " @@ -11107,87 +13443,111 @@ msgstr "" msgid "Price" msgstr "Ціна" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "Ціна філаменту. Тільки для статистики" msgid "money/kg" -msgstr "р/кг" +msgstr "грн/кг" msgid "Vendor" msgstr "Виробник" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "Виробник філаменту. Для показу, тільки для відображення" msgid "(Undefined)" msgstr "(Невизначений)" msgid "Sparse infill direction" -msgstr "Напрямок внутрішнього заповнення" +msgstr "Напрямок часткового заповнення" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Кут для внутрішнього заповнення, який контролює початок або основний " -"напрямок лінії" +"Кут для часткового заповнення, який контролює початок або основний напрямок " +"лінії" msgid "Solid infill direction" -msgstr "Суцільний напрямок заповнення" +msgstr "Напрямок cуцільного заповнення" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "" -"Кут для суцільної заливки, який контролює початок або основний напрямок лінії" - -msgid "Rotate solid infill direction" -msgstr "Поверніть внутрішне заповнення в напрямку" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "Поверніть напрямок внутрішного заповнення на 90° для кожного шару." +"Кут шаблону суцільного заповнення, який контролює початок або основний " +"напрямок лінії" msgid "Sparse infill density" -msgstr "Щільність заповнення" +msgstr "Щільність часткового заповнення" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" +"Щільність внутрішнього часткового заповнення, 100% перетворює все часткове " +"заповнення на суцільне заповнення, і буде застосовано шаблон внутрішнього " +"суцільного заповнення" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" -"Щільність внутрішнього розрідженого заповнення, 100% перетворює все " -"розріджене заповнення на суцільне, і буде використовуватися внутрішній " -"шаблон внутрішнього заповнення" msgid "Sparse infill pattern" -msgstr "Малюнок заповнення" +msgstr "Шаблон часткового заповнення" -msgid "Line pattern for internal sparse infill" -msgstr "Шаблон лінії для внутрішнього заповнення" +msgid "Line pattern for internal sparse infill." +msgstr "Шаблон ліній внутрішнього часткового заповнення" -msgid "Grid" -msgstr "Сітка" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "Лінія" -msgid "Cubic" -msgstr "Кубічний" +msgid "Grid" +msgstr "Сітка" msgid "Tri-hexagon" msgstr "Зірки" -msgid "Gyroid" -msgstr "Гіроїд" - -msgid "Honeycomb" -msgstr "Медові стільники" +msgid "Cubic" +msgstr "Кубічний" msgid "Adaptive Cubic" msgstr "Адаптивний кубічний" -msgid "3D Honeycomb" -msgstr "3D медові стільники" +msgid "Quarter Cubic" +msgstr "Четверть Куба" msgid "Support Cubic" msgstr "Підтримуючий кубічний" @@ -11195,11 +13555,59 @@ msgstr "Підтримуючий кубічний" msgid "Lightning" msgstr "Блискавка" +msgid "Honeycomb" +msgstr "Медові стільники" + +msgid "3D Honeycomb" +msgstr "3D медові стільники" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "2D Решітка" + msgid "Cross Hatch" msgstr "Перехресний штрих" +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "Гіроїд" + +msgid "Lateral lattice angle 1" +msgstr "Кут решітки 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Кут першого набору 2D-решіткових елементів у напрямку Z. Нуль означає " +"вертикальне розташування." + +msgid "Lateral lattice angle 2" +msgstr "Кут решітки 1" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "" +"Кут другого набору 2D-решіткових елементів у напрямку Z. Нуль означає " +"вертикальне розташування." + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "" + msgid "Sparse infill anchor length" -msgstr "Довжина прив'язки заповнення" +msgstr "Довжина прив’язки часткового заповнення" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11209,7 +13617,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -11231,7 +13639,7 @@ msgid "1000 (unlimited)" msgstr "1000 (необмежено)" msgid "Maximum length of the infill anchor" -msgstr "Максимальна довжина прив'язки, що заповнює" +msgstr "Максимальна довжина прив’язки заповнення" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -11241,7 +13649,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -11260,23 +13668,23 @@ msgstr "" msgid "0 (Simple connect)" msgstr "0 (просте підключення)" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "Прискорення зовнішніх периметрів" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "Прискорення внутрішніх периметрів" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "Прискорення холостого руху" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "" "Прискорення заповнення верхньої поверхні. Використання меншого значенняможе " "покращити якість верхньої поверхні" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "" "Прискорення зовнішнього периметра. Використання меншого значення може " "поліпшити якість" @@ -11309,15 +13717,15 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "" -"Прискорення вихідного шару. Використання меншого значення може покращити " -"прилипання будівельної плити" +"Прискорення першого шару. Використання меншого значення може покращити " +"прилипання до робочої пластини" msgid "Enable accel_to_decel" msgstr "Увімкнути прискорення до уповільнення" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "" "Max \"прискорення до уповільнення\" для Klipper буде скориговано автоматично" @@ -11326,58 +13734,69 @@ msgstr "прискорення до уповільнення" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper-ів max_accel_to_decel буде скориговано на цей %% прискорення" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "Ривок зовнішніх периметрів" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "Ривок внутрішніх периметрів" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "Ривок для верхньої поверхні" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "Ривок для заповнення" -msgid "Jerk for initial layer" -msgstr "Ривок для початкового шару" +msgid "Jerk for initial layer." +msgstr "Ривок для першого шару" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "Ривок для переміщення" msgid "" "Line width of initial layer. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "" -"Ширина лінії початкового шару. Якщо виражена у %, вона буде розрахована по " +"Ширина лінії першого шару. Якщо виражена у %, вона буде розрахована по " "діаметру сопла." msgid "Initial layer height" -msgstr "Початкова висота шару" +msgstr "Висота першого шару" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "" -"Висота вихідного шару. Незначна товщина початкової висоти шару може " -"поліпшити прилипання до столу" +"Висота першого шару. Невелике збільшення висоти першого шару може покращити " +"прилипання до робочої пластини" -msgid "Speed of initial layer except the solid infill part" -msgstr "Швидкість першого шару, за винятком суцільної заповнювальної частини" +msgid "Speed of initial layer except the solid infill part." +msgstr "Швидкість першого шару, за винятком зони суцільного заповнення" msgid "Initial layer infill" -msgstr "Початкове заповнення шару" +msgstr "Заповнення першого шару" -msgid "Speed of solid infill part of initial layer" -msgstr "Швидкість суцільної заповнювальної частини вихідного шару" +msgid "Speed of solid infill part of initial layer." +msgstr "Швидкість зони суцільного заповнення першого шару" msgid "Initial layer travel speed" -msgstr "Початкова швидкість переміщення шару" +msgstr "Швидкість переміщення першого шару" -msgid "Travel speed of initial layer" -msgstr "Швидкість переміщення вихідного шару" +msgid "Travel speed of initial layer." +msgstr "Швидкість переміщення першого шару" msgid "Number of slow layers" msgstr "Кількість повільних шарів" @@ -11392,7 +13811,7 @@ msgstr "" msgid "Initial layer nozzle temperature" msgstr "Температура сопла першого шару" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "" "Температура сопла для друку першого шару під час використання цього філаменту" @@ -11420,20 +13839,52 @@ msgid "Support interface fan speed" msgstr "Швидкість вентилятора під час друку підтримки" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"Ця швидкість вентилятора охолодження деталі застосовується під час друку " +"інтерфейсів підтримки. Встановлення цього параметра на вищу за звичайну " +"швидкість зменшує міцність зчеплення між підтримками та деталлю, що " +"підтримується, полегшуючи їх розділення.\n" +"Встановіть -1, щоб вимкнути.\n" +"Цей параметр перевизначається налаштуванням disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Швидкість вентилятора внутрішніх мостів" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Швидкість вентилятора охолодження деталі, що використовується для всіх " +"внутрішніх мостів. Встановіть -1, щоб замість цього використовувати " +"налаштування швидкості вентилятора для нависань.\n" +"\n" +"Зменшення швидкості вентилятора для внутрішніх мостів порівняно зі звичайною " +"швидкістю вентилятора може допомогти знизити деформацію деталі, спричинену " +"надмірним охолодженням великої площі протягом тривалого часу." + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"Ця швидкість вентилятора забезпечується під час усіх інтерфейсів підтримки," -"щоб мати можливість послабити їхнє з'єднання з високою " -"швидкістювентилятора.\n" -"Встановіть -1, щоб вимкнути це перевизначення.\n" -"Може бути перевизначений лише disable_fan_first_layers." msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "" "Випадкове тремтіння під час друку зовнішнього периметра, так що поверхня " "була шорсткої. Цей параметр керує нечіткою оболонкою" @@ -11448,42 +13899,152 @@ msgid "All walls" msgstr "Всі периметри" msgid "Fuzzy skin thickness" -msgstr "Нечітка товщина шкіри" +msgstr "Товщина Шорсткої Поверхні" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "" "Ширина, в межах якої відбувається тремтіння. Небажано бути нижчеширини лінії " "зовнішнього периметра" msgid "Fuzzy skin point distance" -msgstr "Нечітка відстань від точки шкіри" +msgstr "Відстань між точками Шорсткої Поверхні" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "" "Середня відстань між випадковими точками, введеними на кожному відрізкулінії" msgid "Apply fuzzy skin to first layer" -msgstr "Нанести нечітку оболочку на перший шар" +msgstr "Застосувати Шорстку Поверхню до першого шару" -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "Чи потрібно наносити нечітку оболочку на перший шар" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Чи потрібно застосовувати Шорстку Поверхню до першого шару" + +msgid "Fuzzy skin generator mode" +msgstr "" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" + +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "Об'єднана" + +msgid "Fuzzy skin noise type" +msgstr "Тип шуму Шорсткої Поверхні" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Тип шуму для генерації Шорсткої Поверхні.\n" +"Класичний: Класичний рівномірний випадковий шум.\n" +"Перлін: Шум Перліна, який дає більш цілісну текстуру.\n" +"Хвильовий: Подібний до шуму Перліна, але більш складний.\n" +"Гребеневий мультифрактал: Гребеневий шум із різкими, нерівними рисами. " +"Створює мармурові текстури.\n" +"Вороного: Ділить поверхню на комірки Вороного та зміщує кожну з них на " +"випадкову відстань. Створює клаптеву текстуру." + +msgid "Classic" +msgstr "Класичний" + +msgid "Perlin" +msgstr "Перлін" + +msgid "Billow" +msgstr "Хвильовий" + +msgid "Ridged Multifractal" +msgstr "Гребеневий мультифрактал" + +msgid "Voronoi" +msgstr "Вороного" + +msgid "Fuzzy skin feature size" +msgstr "Розмір деталізації Шорсткої Поверхні" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Базовий розмір характеристик когерентного шуму в міліметрах. Вищі значення " +"призведуть до збільшення розміру особливостей." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Октави шуму Шорсткої поверхні" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Кількість октав когерентного шуму для використання. Вищі значення підвищують " +"деталізацію шуму, але також збільшують час обчислень." + +msgid "Fuzzy skin noise persistence" +msgstr "Постійність шуму Шорсткої поверхні" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Швидкість затухання для вищих октав когерентного шуму. Нижчі значення " +"призведуть до більш згладженого шуму." msgid "Filter out tiny gaps" -msgstr "Відфільтрувати крихітні зазори" +msgstr "Відфільтровувати крихітні прогалини" msgid "Layers and Perimeters" msgstr "Шари та периметри" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "Відфільтруйте прогалини, менші за вказаний поріг" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Не друкувати заповнення прогалин, якщо їхня довжина менша за вказаний поріг " +"(у мм). Це налаштування застосовується до верхнього, нижнього та суцільного " +"заповнення, а також, при використанні класичного генератора периметрів, до " +"заповнення проміжків у стінках." msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "" "Швидкість заповнення зазору. Зазор зазвичай має неправильну ширину лінії та " "має друкуватися повільніше" @@ -11492,7 +14053,7 @@ msgid "Precise Z height" msgstr "Точна висота Z" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -11505,16 +14066,16 @@ msgstr "Дугові траекторії" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" "Увімкніть цю опцію, щоб отримати файл G-коду з ходами G2 і G3. Допуск на " -"припасування такий самий, як і роздільна здатність. \n" +"припасування такий самий, як і роздільна здатність.\n" "\n" "Примітка: Для машин з кліперним керуванням цю опцію рекомендується вимкнути. " "Klipper не використовує команди дуги, оскільки вони знову розбиваються " @@ -11525,7 +14086,8 @@ msgstr "" msgid "Add line number" msgstr "Додати номер рядка" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "" "Ця опція використовується для додавання номера рядка (Nx) на початку " "кожногорядки G-Code" @@ -11535,7 +14097,7 @@ msgstr "Сканувати перший шар" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "" "Увімкнення цього параметра дозволяє камері на принтері перевіряти " "якістьпершого шару" @@ -11545,7 +14107,7 @@ msgstr "Тип сопла" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "" "Металевий матеріал сопла. Це визначає зносостійкість сопла та який тип нитки " "можна друкувати" @@ -11559,6 +14121,9 @@ msgstr "Гартова сталь" msgid "Stainless steel" msgstr "Нержавіюча сталь" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "Латунь" @@ -11573,19 +14138,19 @@ msgstr "" "нарізка." msgid "HRC" -msgstr "HRC" +msgstr "" msgid "Printer structure" msgstr "Структура принтера" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "Фізична структура та компоненти пристрою для друку" msgid "CoreXY" msgstr "CoreXY" msgid "I3" -msgstr "I3" +msgstr "І3" msgid "Hbot" msgstr "Hbot" @@ -11608,15 +14173,16 @@ msgstr "" "Увімкніть цю опцію, якщо принтер має вентилятор охолодження допоміжної " "частини. Команда G-коду: M106 P2 S(0-255)." +#, fuzzy msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" "Запустіть вентилятор на таку кількість секунд раніше за цільовий час початку " @@ -11633,7 +14199,7 @@ msgid "Only overhangs" msgstr "Тільки нависання" msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "Враховуйте лише затримку охолодження звисів." +msgstr "Буде враховуватись лише затримка охолодження нависань." msgid "Fan kick-start time" msgstr "Час запуску вентилятора" @@ -11656,7 +14222,7 @@ msgstr "" msgid "Time cost" msgstr "Вартість часу" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "Вартість друку за годину" msgid "money/h" @@ -11685,22 +14251,23 @@ msgstr "" msgid "G-code flavor" msgstr "Тип G-коду" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "З яким gcode сумісний принтер" msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "Принтер модифікований гранулами" -msgid "Enable this option if your printer uses pellets instead of filaments" +msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "" +"Увімкніть цей параметр, якщо ваш принтер використовує гранули, а не філамент" msgid "Support multi bed types" msgstr "Підтримка різних типів поверхонь стола" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "" "Увімкніть цю опцію, якщо ви хочете використовувати кілька типів поверхонь " "стола" @@ -11709,7 +14276,7 @@ msgid "Label objects" msgstr "Маркувати об'єкти" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11723,8 +14290,8 @@ msgstr "" msgid "Exclude objects" msgstr "Виключити об'єкт" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "Увімкнути цей параметр для додавання команди ВИКЛЮЧИТИ ОБ'ЄКТ у g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Увімкнути цей параметр для додавання команди ВИКЛЮЧИТИ ОБ'ЄКТ у G-code" msgid "Verbose G-code" msgstr "Докладний G-код" @@ -11749,8 +14316,143 @@ msgstr "" "разом і зменшити час друку. Стіни все ще друкуються з оригінальною висотою " "шару." +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "Комбінація заповнення - Максимальна висота шару" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Максимальна висота шару для об'єднаного розрідженого заповнення.\n" +"\n" +"Встановіть значення 0 або 100%, щоб використовувати діаметр сопла (для " +"максимального зменшення часу друку) або значення ~80%, щоб збільшити " +"міцність розрідженого заповнення.\n" +"\n" +"Кількість шарів, протягом яких заповнення об'єднується, визначається шляхом " +"ділення цього значення на висоту шару і округлення вниз до найближчого " +"десяткового значення.\n" +"\n" +"Використовуйте абсолютні значення в мм (наприклад, 0.32 мм для сопла 0.4 мм) " +"або відсоткові значення (наприклад, 80%). Це значення не повинно " +"перевищувати діаметр сопла." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." -msgstr "Філамент для друку внутрішнього заповнення." +msgstr "Філамент для друку внутрішнього часткового заповнення." msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " @@ -11760,7 +14462,7 @@ msgstr "" "буде розрахована по діаметру сопла." msgid "Infill/Wall overlap" -msgstr "Заповнення/перекриття периметрів" +msgstr "Накладання заповнення/стінки" #, no-c-format, no-boost-format msgid "" @@ -11776,24 +14478,30 @@ msgstr "" "до шорсткості верхньої поверхні." msgid "Top/Bottom solid infill/wall overlap" -msgstr "Верхнє/нижнє суцільне заповнення/перекриття стін" +msgstr "Накладання суцільного заповнення на стінки зверху та знизу" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" -"Верхній суцільний шар заповнення трохи збільшується, щоб перекривати стіну " -"для кращого зчеплення і мінімізувати появу прогалин у місцях прилягання " -"верхнього шару заповнення до стінки. Значення 25-30% є хорошою відправною " -"точкою, що мінімізує появу прогалин. Значення у відсотках відносно ширини " -"лінії заповнення" +"Площа верхнього суцільного заповнення злегка збільшується, щоб накладатися " +"на стінку для кращого зчеплення та зменшення прогалин у місцях прилягання " +"верхнього заповнення до стінок. Значення 25-30% є хорошим початком для " +"мінімізації таких прогалин. Значення у відсотках відносно ширини лінії " +"часткового заповнення" -msgid "Speed of internal sparse infill" -msgstr "Швидкість внутрішнього заповнення" +msgid "Speed of internal sparse infill." +msgstr "Швидкість внутрішнього часткового заповнення" + +msgid "Inherits profile" +msgstr "Успадковує профіль" + +msgid "Name of parent profile." +msgstr "Назва батьківського профілю" msgid "Interface shells" msgstr "Інтерфейсні оболонки" @@ -11801,7 +14509,7 @@ msgstr "Інтерфейсні оболонки" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "Примусове створення твердих оболонок між сусідніми матеріалами/об'ємами. " "Корисна для друку кількома екструдерами напівпрозорими матеріалами або " @@ -11816,27 +14524,39 @@ msgstr "Максимальна ширина сегментованої обла msgid "Interlocking depth of a segmented region" msgstr "Глибина взаємного взаємодії сегментованої області" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" -"Глибина взаємного взаємодії сегментованої області. Нуль вимикає цю функцію." +"Глибина зчеплення сегментованої області. Буде ігноруватися, якщо " +"\"mmu_segmented_region_max_width\" дорівнює нулю або якщо " +"\"mmu_segmented_region_interlocking_depth\" більший за " +"\"mmu_segmented_region_max_width\".\n" +"\n" +"Нульове значення вимикає цю функцію." msgid "Use beam interlocking" -msgstr "" +msgstr "Використовувати зчеплення балками" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"Генерація зчіпної балкової структури в місцях дотику різних філаментів. Це " +"покращує адгезію між філаментами, особливо для моделей, надрукованих з " +"різних матеріалів." msgid "Interlocking beam width" -msgstr "" +msgstr "Ширина зчіпних балок" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "Ширина балок зчіпної структури." msgid "Interlocking direction" -msgstr "" +msgstr "Напрямок зчеплення" msgid "Orientation of interlock beams." msgstr "" @@ -11848,6 +14568,8 @@ msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." msgstr "" +"Висота балок зчіпної структури, виміряна в кількості шарів. Менша кількість " +"шарів забезпечує більшу міцність, але підвищує ризик дефектів." msgid "Interlocking depth" msgstr "" @@ -11856,17 +14578,22 @@ msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"Глибина зчіплення – відстань від межі між філаментами для генерації зчіпної " +"структури, вимірюється в комірках. Занадто мала кількість комірок призведе " +"до слабкої адгезії." msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "Уникнення зчіпної межі" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"Відстань від зовнішнього краю моделі, в межах якої зчіпні структури не " +"будуть створюватися, вимірюється в комірках." msgid "Ironing Type" -msgstr "Тип Розглажування" +msgstr "Тип розгладжування" msgid "" "Ironing is using small flow to print on same height of surface again to make " @@ -11877,7 +14604,7 @@ msgstr "" "параметр визначає, який шар гладити" msgid "No ironing" -msgstr "Немає Розглажування" +msgstr "Немає Розгладжування" msgid "Top surfaces" msgstr "Верхові поверхні" @@ -11889,17 +14616,17 @@ msgid "All solid layer" msgstr "Весь суцільний шар" msgid "Ironing Pattern" -msgstr "Зразок прасування" +msgstr "Шаблон прасування" -msgid "The pattern that will be used when ironing" -msgstr "Візерунок, який буде використовуватися під час прасування" +msgid "The pattern that will be used when ironing." +msgstr "Шаблон, який буде використовуватися під час прасування" msgid "Ironing flow" msgstr "Плавний потік" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "" "Кількість матеріалу, що видавлюється під час розглажування. Щодо " "потокунормальної висоти шару. Надто високе значення призводить до " @@ -11908,34 +14635,49 @@ msgstr "" msgid "Ironing line spacing" msgstr "Крок лінії розглажування" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "Відстань між лініями розглажування" +msgid "Ironing inset" +msgstr "Вставка прасування" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Відстань до збереження від країв. Значення 0 встановлює її рівною половині " +"діаметра сопла" + msgid "Ironing speed" msgstr "Швидкість розглажування" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "Швидкість друку прасувальних ліній" -msgid "Ironing angle" -msgstr "Кут прасування" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -"Прасування виконується під кутом. Від'ємне число вимикає цю функцію і " -"використовує метод за замовчуванням." -msgid "This gcode part is inserted at every layer change after lift z" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "Ця частина gcode вставляється при кожній зміні шару після підйому z" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "Підтримує безшумний режим" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "" "Чи підтримує машина безшумний режим, у якому машина використовує " "меншеприскорення для друку" @@ -11948,26 +14690,27 @@ msgstr "Обмеження машини" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Якщо увімкнено, ліміти машини будуть виводитися у файл G-коду.\n" "Цей параметр буде проігноровано, якщо у параметрах g-коду встановлено " "значення Klipper." +#, fuzzy msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "" "Цей G-код буде використовуватися як код для друку паузи.Користувач може " "вставити паузу G-коду в gcode viewer" -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "Цей G-код буде використовуватися як код користувача" msgid "Small area flow compensation (beta)" msgstr "Компенсація потоку на малих площах (бета)" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "Увімкніть компенсацію потоку для невеликих ділянок заповнення" msgid "Flow Compensation Model" @@ -11976,13 +14719,9 @@ msgstr "Модель компенсації потоку" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"Модель компенсації потоку, що використовується для коригування потоку для " -"невеликих ділянок заповнення. Модель виражається у вигляді пари значень " -"довжини екструзії та коефіцієнтів корекції потоку, розділених комами, по " -"одному в рядку, у наступному форматі: \"1.234,5.678\"" msgid "Maximum speed X" msgstr "Максимальна швидкість X" @@ -12056,6 +14795,15 @@ msgstr "Максимальний ривок осі Z" msgid "Maximum jerk of the E axis" msgstr "Максимальний ривок осі E" +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "Мінімальна швидкість екструзії" @@ -12083,55 +14831,72 @@ msgstr "Максимальне прискорення для втягуванн msgid "Maximum acceleration for travel" msgstr "Максимальне прискорення руху" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "" "Максимальне прискорення для пересування (M204 T), застосовується лише до " "Marlin 2" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "Мін" + +msgid "Minimum speed of resonance avoidance." +msgstr "" + +msgid "Max" +msgstr "Макс" + +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" "Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"is the maximum speed for the part cooling fan." msgstr "" "Швидкість вентилятора охолодження деталі може бути збільшена, якщо " "увімкненоавтоматичне охолодження. Це максимальне обмеження швидкості " "вентилятораохолодження деталі" -msgid "Max" -msgstr "Макс" - msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." msgstr "" -"Найбільша висота шару, що друкується, для екструдера. Використовуваний tp " -"обмежує максимальну висоту шару при включенні адаптивної висоти шару" msgid "Extrusion rate smoothing" msgstr "Вирівнювання швидкості екструзії" +#, fuzzy msgid "" "This parameter smooths out sudden extrusion rate changes that happen when " "the printer transitions from printing a high flow (high speed/larger width) " "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -12147,7 +14912,7 @@ msgstr "" "дозволені більші зміни швидкості екструзії, що призводить до швидшого " "переходу від однієї швидкості до іншої.\n" "\n" -"Значення 0 вимикає цю функцію. \n" +"Значення 0 вимикає цю функцію.\n" "\n" "Для високошвидкісних, високопродуктивних принтерів з прямим приводом " "(наприклад, Bambu lab або Voron) це значення зазвичай не потрібне. Однак " @@ -12159,39 +14924,50 @@ msgstr "" "\n" "Для повільніших принтерів без попереднього випередження тиску значення має " "бути значно нижчим. Значення 10-15 мм3/с2 є хорошою відправною точкою для " -"екструдерів з прямим приводом і 5-10 мм3/с2 для екструдерів типу Боудена. \n" +"екструдерів з прямим приводом і 5-10 мм3/с2 для екструдерів типу Боудена.\n" "\n" "Ця функція відома як \"Вирівнювач тиску\" в слайсерах Prusa.\n" "\n" "Примітка: цей параметр відключає рух по дугам." -msgid "mm³/s²" -msgstr "мм³/с²" - msgid "Smoothing segment length" msgstr "Довжина сегмента згладжування" +#, fuzzy msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -"Менше значення забезпечує плавніші переходи швидкості екструзії. Однак це " -"призводить до значно більшого розміру файлу gcode і більшої кількості " -"інструкцій для обробки принтером. \n" +"Нижче значення призводить до більш плавних переходів швидкості екструзії. " +"Однак це значно збільшує розмір файлу G-code і кількість команд, які " +"потрібно обробити принтеру.\n" "\n" -"Значення за замовчуванням 3 добре підходить для більшості випадків. Якщо ваш " -"принтер зависає, збільште це значення, щоб зменшити кількість інструкцій для " -"принтера.\n" +"Типове значення 3 добре підходить для більшості випадків. Якщо ваш принтер " +"працює ривками, збільште це значення, щоб зменшити кількість коригувань.\n" "\n" -"Допустимі значення: 1-5" +"Допустимі значення: 0.5-5" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "Застосовувати лише до зовнішніх особливостей" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Застосовує згладжування швидкості екструзії лише до зовнішніх периметрів і " +"нависань. Це може допомогти зменшити артефакти, викликані різкими змінами " +"швидкості на зовнішньо видимих нависаннях, без впливу на швидкість друку " +"елементів, які не будуть видимі для користувача." + +msgid "Minimum speed for part cooling fan." msgstr "Мінімальна швидкість вентилятора охолодження деталі" msgid "" @@ -12207,32 +14983,24 @@ msgstr "" "Щоб скористатися цією функцією, увімкніть параметр auxiliary_fan у " "налаштуваннях принтера. Команда G-коду: M106 P2 S(0-255)" -msgid "Min" -msgstr "Мін" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." msgstr "" -"Найнижча висота шару, що друкується, для екструдера. Використовуваний tp " -"обмежує мінімальну висоту шару при включенні адаптивної висоти шару" msgid "Min print speed" msgstr "Мін. швидкість друку" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" -"Мінімальна швидкість друку, до якої принтер сповільнюватиметься, щоб " -"зберегти мінімальний час проходження шару, вказаний вище, коли ввімкнено " -"сповільнення для кращого охолодження шару." +"Мінімальна швидкість друку, до якої принтер сповільнюється для підтримки " +"мінімального часу шару, визначеного вище, коли увімкнено уповільнення для " +"кращого охолодження шару." -msgid "Nozzle diameter" -msgstr "Діаметр сопла" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "Діаметр сопла" msgid "Configuration notes" @@ -12258,7 +15026,7 @@ msgstr "" msgid "Nozzle volume" msgstr "Об'єм сопла" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "Об'єм сопла між різцем та кінцем сопла" msgid "Cooling tube position" @@ -12304,7 +15072,7 @@ msgstr "Додаткова відстань заведення" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "Якщо встановлено на нуль, відстань, на яку філамент переміщується з " @@ -12324,16 +15092,23 @@ msgstr "Зменшити втягування заповнення" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "Повністю відключає втягування при переміщенні в зоні заповнення. При цьому " "витікання не буде помітно. Це може зменшити час втягування складної моделі " "та заощадити час друку, але уповільнить нарізку та генерацію G-коду" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Цей параметр знижує температуру неактивних екструдерів, щоб запобігти " +"підтіканням." + msgid "Filename format" msgstr "Формат імені файлу" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "" "Користувач може самостійно визначити ім'я файлу проекту під час експорту" @@ -12360,24 +15135,25 @@ msgstr "Зробити нависання можливими для друку - msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "Максимальна площа отвору в основі моделі перед заповненням його конічним " "матеріалом. Значення 0 заповнює всі отвори в основі моделі." -msgid "mm²" -msgstr "мм²" - msgid "Detect overhang wall" -msgstr "Виявлення стінок, що нависають" +msgstr "Виявлення стінок що нависають" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"Визначте відсоток звису щодо ширини лінії та використовуйте для друку іншу " -"швидкість. Для 100%% -ного звису використовується швидкість моста." +"Визначити відсоток нависання відносно до ширини лінії та використовувати для " +"друку іншу швидкість. Для 100%%-вого нависання використовується швидкість " +"моста." + +msgid "Filament to print walls." +msgstr "Філамент для друку стінок" msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " @@ -12386,31 +15162,31 @@ msgstr "" "Ширина лінії внутрішньої стінки. Якщо виражається у %, вона буде розрахована " "по діаметру сопла." -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "Швидкість внутрішнього периметра" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "Кількість стінок кожного шару" msgid "Alternate extra wall" -msgstr "Альтернативна додаткова стінка" +msgstr "Чергувати додаткову стінку" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" "Цей параметр додає додаткову стінку до кожного другого шару. Таким чином, " "заповнення затискається вертикально між стінками, що призводить до більш " -"міцних відбитків. \n" +"міцних відбитків.\n" "\n" "Якщо цей параметр увімкнено, параметр Забезпечити вертикальну товщину " -"оболонки потрібно вимкнути. \n" +"оболонки потрібно вимкнути.\n" "\n" "Використання блискавичної заливки разом з цією опцією не рекомендується, " "оскільки кількість заливки, до якої можна прикріпити додаткові периметри, " @@ -12429,37 +15205,46 @@ msgstr "" "аргумент, і вони можуть отримати доступ до налаштувань Snapmaker Orca " "конфігурації шляхом читання змінних середовища." +msgid "Printer type" +msgstr "Тип принтеру" + +msgid "Type of the printer." +msgstr "Тип принтера" + msgid "Printer notes" msgstr "Нотатки для принтера" msgid "You can put your notes regarding the printer here." msgstr "Ви можете залишити свої примітки щодо принтера тут." -msgid "Raft contact Z distance" -msgstr "Відстань контакту плоту Z" +msgid "Printer variant" +msgstr "Варіант принтера" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Raft contact Z distance" +msgstr "Відстань Z контакту підкладки" + +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "" -"Z зазор між об'єктом та підкладкою. Ігнорується для розчинного матеріалу" +"Зазор Z між об'єктом та підкладкою. Ігнорується для розчинного інтерфейсу" msgid "Raft expansion" -msgstr "Розширення плоту" +msgstr "Розширення підкладки" -msgid "Expand all raft layers in XY plane" -msgstr "Розгорнути всі шари плоту в площині XY" +msgid "Expand all raft layers in XY plane." +msgstr "Розширити всі шари підкладки в площині XY" msgid "Initial layer density" msgstr "Початкова щільність шару" -msgid "Density of the first raft or support layer" -msgstr "Щільність першого шару або опорного шару" +msgid "Density of the first raft or support layer." +msgstr "Щільність першого шару підкладки або підтримки" msgid "Initial layer expansion" msgstr "Розширення початкового шару" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "" -"Розширити першу підкладку або шар підтримки, щоб покращити прилипання до " +"Розширити перший шар підкладки або підтримки, щоб покращити прилипання до " "робочої поверхні" msgid "Raft layers" @@ -12467,15 +15252,16 @@ msgstr "Кількість шарів підкладки" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "Об'єкт буде піднятий такою кількістю опорних шарів. Використовуйте цю " "функцію, щоб уникнути обтікання під час друку ABS" +#, fuzzy msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "Контур G-коду генерується після спрощення контуру моделей, щоб уникнути " "надмірної кількості точок і ліній G-коду. Менші значення означають вищу " @@ -12486,23 +15272,23 @@ msgstr "Поріг відстані в дорозі" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "" "Втягувати тільки в тому випадку, якщо відстань переміщення перевищує цей " "поріг" msgid "Retract amount before wipe" -msgstr "Втягування при розгладжуванні" +msgstr "Обсяг втягування перед протиранням" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "" -"Довжина швидкого втягування перед очищенням, відносно довжини втягування" +"Довжина швидкого втягування перед протиранням, відносно довжини втягування" msgid "Retract when change layer" msgstr "Втягування при зміні шару" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "Примусове втягування при зміні шару" msgid "Retraction Length" @@ -12510,71 +15296,77 @@ msgstr "Довжина втягування" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"Деяка кількість матеріалу в екструдері витягується назад, щоб уникнути " -"витікання під час тривалого переміщення. Встановіть нуль, щоб відключити " -"втягування" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "Довге втягування при відрізанні (експериментально)" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" "Експериментальна функція. Втягування та відрізання філаменту на більшій " -"відстані під час змін для мінімізації очищення. Хоча це значно зменшує " -"кількість витоку, це також може збільшити ризик забивання сопла або інших " -"проблем з друку." +"відстані під час змін для мінімізації очищення. Хоча це значно зменшує об'єм " +"промивки, це також може збільшити ризик забивання сопла або інших проблем з " +"друку." msgid "Retraction distance when cut" msgstr "Відстань втягування при відрізанні" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "" "Експериментальна функція. Відстань втягування перед відрізанням під час " "зміни філаменту" -msgid "Z hop when retract" -msgstr "Z-стрибок при втягуванні" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Висота Z-підйому" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "Під час кожного втягування сопло трохи піднімається, щоб створити зазор між " "соплом та об’єктом друку. Це запобігає зіткненню сопла з об’єктом друку під " "час переміщення. Використання спіральної лінії підняття по осі Z може " "запобігти появі ниток" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Межа зниження Z-hop" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" "Z-hop буде активуватися лише тоді, коли Z перевищує це значення і " "знаходиться нижче параметра “Верхня межа зниження Z”." -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Верхня межа зниження Z" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" "Якщо це значення позитивне, то Z-hop буде діяти лише тоді, коли Z перевищує " "параметр “Межа зниження Z” і знаходиться нижче цього значення" -msgid "Z hop type" -msgstr "Тип Z-стрибка" +msgid "Z-hop type" +msgstr "Тип Z-підйому" + +msgid "Type of Z-hop." +msgstr "" msgid "Slope" msgstr "Схил" @@ -12583,12 +15375,14 @@ msgid "Spiral" msgstr "Спіраль" msgid "Traveling angle" -msgstr "" +msgstr "Кут переміщення" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" +"Кут переміщення для типів підйому Z Slope і Spiral. Встановлення значення " +"90° призведе до звичайного підйому" msgid "Only lift Z above" msgstr "Підіймати Z лише вище" @@ -12614,7 +15408,7 @@ msgid "On surfaces" msgstr "На поверхнях" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "Увімкнути поведінку стрибків Z. На цей параметр впливають попередні " @@ -12632,6 +15426,18 @@ msgstr "Тільки знизу" msgid "Top and Bottom" msgstr "Зверху та знизу" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Боуден" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "Додаткова довжина під час перезавантаження" @@ -12652,18 +15458,16 @@ msgstr "" msgid "Retraction Speed" msgstr "Швидкість ретракту" -msgid "Speed of retractions" -msgstr "Швидкість ретракту" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "Швидкість компенсуючого ретракту" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." msgstr "" -"Швидкість перезарядки філпмента в екструдер. Нуль означає ту ж швидкість при " -"ретракті" msgid "Use firmware retraction" msgstr "Використовувати ретракт прошивки" @@ -12683,37 +15487,40 @@ msgid "Disable set remaining print time" msgstr "Вимкнути опцію Час друку що залишився" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "" "Вимкнути генерацію M73: Встановити час друку, що залишився, у кінцевому gcode" msgid "Seam position" -msgstr "Положення шва" +msgstr "Розташування шва" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Початкове положення для друку кожної частини зовнішнього периметра" msgid "Nearest" -msgstr "Найближчий" +msgstr "Найближче" msgid "Aligned" -msgstr "Вирівняний" +msgstr "Вирівняне" + +msgid "Aligned back" +msgstr "" msgid "Back" msgstr "Ззаду" msgid "Random" -msgstr "Випадковий" +msgstr "Випадкове" msgid "Staggered inner seams" -msgstr "Зміщений внутрішній шов" +msgstr "Зміщувати внутрішній шов" msgid "" "This option causes the inner seams to be shifted backwards based on their " "depth, forming a zigzag pattern." msgstr "" -"Ця опція призводить до того, що внутрішні шви зміщуються назад відповідно до " -"їх глибини, утворюючи зигзагоподібний візерунок." +"Ця опція змушує внутрішні шви зміщуватися у зворотному напрямку відповідно " +"до їх глибини, утворюючи зигзагоподібний порядок." msgid "Seam gap" msgstr "Зазор шва" @@ -12739,14 +15546,14 @@ msgstr "" "збільшити міцність шва." msgid "Conditional scarf joint" -msgstr "Умовне з’єднання шарфом" +msgstr "Шарфовий шов за потреби" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." msgstr "" -"Застосовувати з’єднання з шарфом лише до гладких периметрів, де традиційні " -"шви не ефективно приховують шви в гострих кутах." +"Застосовувати шарфове з'єднання лише на гладких периметрах, де звичайні шви " +"неможливо приховати в гострих кутах." msgid "Conditional angle threshold" msgstr "Умовний поріг кута" @@ -12765,7 +15572,7 @@ msgstr "" "шарфом. Значення за замовчуванням - 155°." msgid "Conditional overhang threshold" -msgstr "Умовний поріг звису" +msgstr "Умовний поріг нависань" #, no-c-format, no-boost-format msgid "" @@ -12775,23 +15582,23 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" -"Ця опція визначає поріг звису для застосування стрічкових швів. Якщо " +"Ця опція визначає поріг нависання для застосування стрічкових швів. Якщо " "непідтримувана частина периметра менша за цей поріг, будуть застосовані " "стрічкові шви. За замовчуванням поріг встановлюється на рівні 40% від ширини " -"зовнішньої стіни. З міркувань продуктивності оцінюється ступінь звису." +"зовнішньої стіни. З міркувань продуктивності оцінюється ступінь нависання." msgid "Scarf joint speed" -msgstr "Швидкість з'єднання шва" +msgstr "Швидкість шарфового з'єднання" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "Цей параметр задає швидкість друку швів. Рекомендується друкувати " "з'єднувальні стрічки на повільній швидкості (менше 100 мм/с). Також " @@ -12804,25 +15611,25 @@ msgstr "" "внутрішньої стінки. За замовчуванням встановлено значення 100%." msgid "Scarf joint flow ratio" -msgstr "Коефіцієнт пропускної здатності шарфового шва" +msgstr "Коефіцієнт потоку шарфового шва" msgid "This factor affects the amount of material for scarf joints." msgstr "Цей фактор впливає на кількість матеріалу для з'єднання швів." msgid "Scarf start height" -msgstr "Висота початку шарфу" +msgstr "Початкова висота шарфа" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" -"Висота початку шарфу.\n" +"Початкова висота шарфа.\n" "Ця величина може бути вказана в міліметрах або як відсоток від поточної " -"товщини шару. Значення за замовчуванням для цього параметра - 0." +"висоти шару. Значення за замовчуванням для цього параметра - 0." msgid "Scarf around entire wall" -msgstr "Шарф навколо всієї стіни" +msgstr "Шарф вздовж всієї стіни" msgid "The scarf extends to the entire length of the wall." msgstr "Шарф простягається на всю довжину стіни." @@ -12849,20 +15656,21 @@ msgid "Use scarf joint for inner walls as well." msgstr "Використовувати з’єднання з шарфом також для внутрішніх стін." msgid "Role base wipe speed" -msgstr "Базова швидкість очищення ролей" +msgstr "Швидкість протирання залежно від типу" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" -"Швидкість очищення визначається швидкістю поточної ролі екструзії. " +"Швидкість протирання визначається швидкістю поточної ролі екструзії. " "Наприкладякщо дія очищення виконується відразу після екструзії зовнішнього " "периметра,швидкість екструзії зовнішнього периметра буде використовуватися " "для діїочищення." msgid "Wipe on loops" -msgstr "Розгладжування шва" +msgstr "Протирати на контурах" msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " @@ -12872,103 +15680,126 @@ msgstr "" "Невеликий рух усередину виконується до виходу екструдера з контуру." msgid "Wipe before external loop" -msgstr "Протирання перед зовнішньою стінкою" +msgstr "Протирати перед зовнішнім контуром" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "Щоб мінімізувати видимість потенційного надмірного видавлювання на початку " "зовнішнього периметра під час друку з опцією друку стінок \"Зовнішній/" "внутрішній\" або \"Внутрішній/зовнішній/внутрішній\", втягування виконується " "злегка зсередини від початку зовнішнього периметра. Таким чином, будь-який " -"потенційний надлишок накату приховується від зовнішньої поверхні. \n" +"потенційний надлишок накату приховується від зовнішньої поверхні.\n" "\n" "Це корисно під час друку із зовнішнім/внутрішнім або внутрішнім/зовнішнім/" "внутрішнім друком стінок, оскільки в цих режимах, найімовірніше, зовнішній " "периметр буде надруковано одразу після руху втягування." msgid "Wipe speed" -msgstr "Швидкість очищення" +msgstr "Швидкість протирання" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"Швидкість очищення визначається налаштуванням швидкості, зазначеної в " +"Швидкість протирання визначається налаштуванням швидкості, зазначеної в " "данійконфігурації. Якщо це значення виражено у відсотках (наприклад, 80%), " "то воно буде розраховано на основі наведеної вище установки швидкості руху. " "За замовчуванням для цього параметра - 80%" msgid "Skirt distance" -msgstr "Відстань між спідницею/каймою" +msgstr "Відступ спідниці" -msgid "Distance from skirt to brim or object" -msgstr "Відстань між спідницею/каймою або моделлю" +msgid "The distance from the skirt to the brim or the object." +msgstr "Відстань між спідницею та каймою або моделлю" + +msgid "Skirt start point" +msgstr "Початкова точка спідниці" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Кут від центру об'єкта до початкової точки спідниці. Нуль - це найбільш " +"права позиція, позитивний кут - проти годинникової стрілки." msgid "Skirt height" -msgstr "Шари спідниці" +msgstr "Висота спідниці" -msgid "How many layers of skirt. Usually only one layer" -msgstr "Скільки шарів спідниці. Зазвичай лише один шар" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Скільки буде шарів спідниці. Зазвичай лише один шар" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" -msgstr "Чорновий щит" +msgstr "Захисний екран" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"Захист від протягів потрібен для захисту відбитків на ABS або ASA від " -"деформації та відриву від друкарської платформи через протяги. Зазвичай він " -"потрібен лише для принтерів з відкритою рамою, тобто без корпусу. \n" +"Захисний екран буде корисним для захисту друку ABS або ASA від викривлення " +"та відлипання від столу в наслідок протягу повітря. Зазвичай він потрібен " +"для відкритих принтерів, які не мають закритої камери.\n" "\n" -"Параметри:\n" -"Увімкнено = висота спідниці дорівнює висоті найвищого надрукованого " -"об'єкта.\n" -"Обмежено = висота об'єкта не перевищує заданої висоти об'єкта.\n" -"\n" -"Примітка: При активному захисному екрані спідниця буде надрукована на " -"відстані крайки від об'єкта. Тому, якщо активовані краї, вона може " -"перетинатися з ними. Щоб уникнути цього, збільште значення відстані до " -"об'єкта.\n" - -msgid "Limited" -msgstr "Обмежено" +"Увімкнено = Спідниця буде тої ж висоти що і найвищий об'єкт друку. Інакше " +"буде застосовано параметр \"Висота спідниці\"\n" +"До уваги: При увімкненому захисному екрані, спідниця буде надрукована на " +"відстані від об'єкту. Тому, якщо увімкнена кайма, вони можуть перетинатися. " +"Щоб запобігти цьому, збільшіть значення відстані спідниці.\n" msgid "Enabled" msgstr "Увімкнуто" -msgid "Skirt loops" -msgstr "Спідниця навколо моделі" +msgid "Skirt type" +msgstr "Тип спідниці" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "Кількість петель для спідниці. Нуль означає відключення спідниці" +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Об'єднана - одна спідниця для всіх об'єктів, Пооб'єктна - окрема спідниця " +"для кожного об'єкта." + +msgid "Per object" +msgstr "Роздільна" + +msgid "Skirt loops" +msgstr "Кількість контурів спідниці" + +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Кількість контурів для спідниці. Нуль означає відключення спідниці" msgid "Skirt speed" msgstr "Швидкість спідниці" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "" -"Швидкість спідниці, у мм/с. Нуль означає використання стандартної швидкості " +"Швидкість спідниці, у мм/с. Нуль означає використання звичайної швидкості " "екструзії шару." msgid "Skirt minimum extrusion length" @@ -12978,32 +15809,43 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"Мінімальна довжина витягування нитки в мм під час друку спідниці. Нуль " -"означає, що ця функція вимкнена.\n" +"Мінімальна довжина подачі філаменту у мм при друці спідниці. Нуль означає, " +"що ця функція буде вимкнена.\n" "\n" -"Використання ненульового значення корисне, якщо принтер налаштовано на друк " -"без початкової лінії." +"Значення більше нуля доречно використовувати, якщо принтер налаштований без " +"підготовчої лінії.\n" +"Остаточна кількість контурів не враховується при упорядкуванні або перевірці " +"відстані об'єктів. Збільшіть кількість контурів у такому разі." msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "Швидкість друку в експортованому gcode буде уповільнена, коли розрахунковий " "час шару менше цього значення, щоб отримати найкраще охолодження для цих " "шарів" msgid "Minimum sparse infill threshold" -msgstr "Мінімальний поріг заповнення" +msgstr "Мінімальний поріг часткового заповнення" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "" -"Площа заповнення, яка менша за порогове значення, замінюється внутрішнім " -"суцільним заповненням" +"Ділянки часткового заповнення, менші за порогове значення, замінюються " +"внутрішнім суцільним заповненням" + +msgid "Solid infill" +msgstr "Суцільне заповнення" + +msgid "Filament to print solid infill." +msgstr "Філамент для друку суцільного заповнення" msgid "" "Line width of internal solid infill. If expressed as a %, it will be " @@ -13012,14 +15854,14 @@ msgstr "" "Ширина лінії внутрішнього суцільного заповнення. Якщо виражена у %, вона " "буде розрахована по діаметру сопла." -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "" "Швидкість внутрішнього твердого заповнення, а не верхньої та нижньої поверхні" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "Перехід спіраллю згладжує рух z зовнішнього контуру. І перетворює " "твердотільна модель в одностінний друк із суцільними нижніми шарами.Кінічна " @@ -13029,8 +15871,8 @@ msgid "Smooth Spiral" msgstr "Плавна спіраль" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "Плавна спіраль згладжує переміщення по X та Y, що призводить до відсутності " "видимого шва, навіть у напрямках XY на стінах, які не є вертикальними" @@ -13038,13 +15880,40 @@ msgstr "" msgid "Max XY Smoothing" msgstr "Максимальне згладжування XY" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" -"Максимальна відстань переміщення точок по XY для спроби досягнення плавної " -"спіралі. Якщо виражено у відсотках, вона буде обчислена відносно діаметра " -"сопла" + +msgid "Spiral starting flow ratio" +msgstr "Коефіцієнт початкового потоку для спіралі" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Задає початковий коефіцієнт потоку при переході з останнього нижнього шару " +"до спіралі. Зазвичай спіральний перехід плавно збільшує коефіцієнт потоку " +"від 0% до 100% під час проходу першого контуру, що може призвести до " +"недостатньої подачі філаменту на початку спіралі." + +msgid "Spiral finishing flow ratio" +msgstr "Коефіцієнт подачі матеріалу для спірального завершення" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Задає кінцевий коефіцієнт потоку при завершенні спіралі. Зазвичай спіральний " +"перехід плавно знижує коефіцієнт потоку від 100% до 0% під час проходу " +"останнього контуру, що може призвести до недостатньої подачі філаменту у " +"кінці спіралі." msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -13058,9 +15927,9 @@ msgid "" msgstr "" "Якщо вибрано плавний або традиційний режим, для кожного друку буде " "згенеровано відео з часовим інтервалом. Після друку кожного шару Знімок " -"камери робиться. Всі ці знімки створюються у вигляді відео з тимчасовим " +"камери робиться. Всі ці знімки створюються у вигляді відео з тимчасовим " "інтервалом після завершення друку. Якщо вибрано режим згладжування, то Після " -"друку кожного шару головка інструментів переміщається до надмірноголотку, а " +"друку кожного шару головка інструментів переміщається до надмірного лотку, а " "потім знімається знімок. Оскільки філамент може просочуватися з сопла під " "час отримання знімка, для гладкого режиму очищення сопла потрібна вежа " "очищення." @@ -13071,23 +15940,59 @@ msgstr "Традиційний" msgid "Temperature variation" msgstr "Зміна температури" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Різниця температури, яка застосовується, коли екструдер не активний. " +"Значення не використовується, якщо в налаштуваннях філаменту параметр " +"'idle_temperature' встановлений на ненульове значення." + +msgid "Preheat time" +msgstr "Час підігріву" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Щоб зменшити час очікування після зміни інструмента, Orca може попередньо " +"нагрівати наступний інструмент, поки поточний ще використовується. Цей " +"параметр визначає час у секундах для попереднього нагрівання наступного " +"інструмента.\n" +"\n" +"Orca вставить команду M104 для завчасного нагрівання інструмента." + +msgid "Preheat steps" +msgstr "Кроки підігріву" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Вставляє кілька команд попереднього нагріву (наприклад, M104.1). Корисно " +"лише для Prusa XL. Для інших принтерів слід встановити значення 1." + msgid "Start G-code" msgstr "Стартовий G-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "Стартовий G-code під час запуску всієї печатки" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "Стартовий G-code при запуску друку цим філаментом" msgid "Single Extruder Multi Material" msgstr "Мульти-матеріальний (ММ) друк з одним екструдером" -msgid "Use single nozzle to print multi filament" -msgstr "Використовувати одне сопло для друку декількома нитками" +msgid "Use single nozzle to print multi filament." +msgstr "Використовувати одне сопло для друку декількома філаментами" msgid "Manual Filament Change" -msgstr "Ручна заміна нитки" +msgstr "Ручна заміна філаменту" msgid "" "Enable this option to omit the custom Change filament G-code only at the " @@ -13102,20 +16007,20 @@ msgstr "" "де ми використовуємо M600/PAUSE для запуску ручної заміни нитки." msgid "Purge in prime tower" -msgstr "Очищення в головній башті" +msgstr "Очищати на підготовчій вежі" -msgid "Purge remaining filament into prime tower" -msgstr "Видаліть залишки нитки в башту первинного намотування" +msgid "Purge remaining filament into prime tower." +msgstr "Очистити від залишків філаменту на підготовчій вежі" msgid "Enable filament ramming" -msgstr "Увімкнути накат нитки" +msgstr "" msgid "No sparse layers (beta)" msgstr "Без розріджених шарів (бета)" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -13187,44 +16092,50 @@ msgid "Enable support generation." msgstr "Увімкнути генерацію підтримки." msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"звичайна (auto) та деревоподібна (auto) використовується для " -"автоматичногостворення підтримки. Якщо вибрано звичайну (ручну) або " -"деревоподібну (ручну), створюються лише засоби забезпечення підтримки" +"Normal (auto) і Tree (auto) використовуються для автоматичного створення " +"підтримок. Якщо вибрано Normal (manual) або Tree (manual), будуть " +"створюватися лише примусові підтримки" -msgid "normal(auto)" -msgstr "звичайна (авто)" +msgid "Normal (auto)" +msgstr "Звичайні (авто)" -msgid "tree(auto)" -msgstr "деревоподібна (авто)" +msgid "Tree (auto)" +msgstr "Дерево (авто)" -msgid "normal(manual)" -msgstr "звичайна (ручна)" +msgid "Normal (manual)" +msgstr "Звичайні (ручні)" -msgid "tree(manual)" -msgstr "деревоподібна (ручна)" +msgid "Tree (manual)" +msgstr "Дерево (ручні)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "Підтримка/об'єкт XY відстань" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "Контролює відстань по XY між об’єктом та його опорою" +msgid "Support/object first layer gap" +msgstr "Проміжок між опорою/об’єктом та першим шаром" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Відстань XY між об’єктом та його опорою на першому шарі." + msgid "Pattern angle" msgstr "Кут шаблону" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "" -"Використовуйте це налаштування, щоб повернути шаблон підтримки в " -"горизонтальному площини." +"Використовуйте цей параметр, щоб повернути шаблон підтримки в горизонтальній " +"площині." msgid "On build plate only" -msgstr "Тільки від столу" +msgstr "Тільки на робочій пластині" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "Не створюйте опору на поверхні моделі лише від столу" msgid "Support critical regions only" @@ -13237,33 +16148,33 @@ msgstr "" "Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," "консоль і т.д." -msgid "Remove small overhangs" -msgstr "Видалити невеликі виступи" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "Видалити невеликі виступи, які, можливо, не потребують підтримки." +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "Верхня відстань Z" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "Зазор осі z між верхом підтримки та об'єктом" msgid "Bottom Z distance" msgstr "Нижня відстань Z" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "Зазор осі z між низом підтримки та об'єктом" msgid "Support/raft base" -msgstr "Підтримка/основа плоту" +msgstr "База підтримки/підкладки" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" -"Філамент для друку опорної основи та плоту. «За замовчуванням» означає " -"відсутність конкретного філаменту для опори та використання поточного " +"Філамент для друку підтримок та підкладки. «За замовчуванням» означає " +"відсутність конкретного філаменту для підтримок та використання поточного " "філаменту" msgid "Avoid interface filament for base" @@ -13283,7 +16194,7 @@ msgstr "" "діаметру сопла." msgid "Interface use loop pattern" -msgstr "Інтерфейс використовує шаблон шлейфу" +msgstr "Інтерфейс використовує шаблон контуру" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." @@ -13291,11 +16202,11 @@ msgstr "" "Накрийте петлями верхній контактний шар опор. Вимкнено за замовчуванням." msgid "Support/raft interface" -msgstr "Інтерфейс підтримки/плота" +msgstr "Інтерфейс підтримки/підкладки" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "" "Філамент для друку підтримки. «За замовчуванням» означає відсутність " "конкретного філаменту для друку підтримки, і використовується поточний " @@ -13304,13 +16215,13 @@ msgstr "" msgid "Top interface layers" msgstr "Верхній шар підтримки" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "Кількість верхніх шарів підтримки" msgid "Bottom interface layers" msgstr "Нижні шари підтримки" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "Кількість шарів інтерфейсу на дні" msgid "Same as top" @@ -13319,23 +16230,25 @@ msgstr "Так само, як вище" msgid "Top interface spacing" msgstr "Відстань між верхніми інтерфейсами" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "Відстань між лініями підтримки. Нуль означає суцільну підтримку" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "Інтервал нижнього шару підтримки" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "" "Відстань між нижніми інтерфейсними лініями. Нуль означає суцільнийінтерфейс" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "Швидкість друку підтримки" msgid "Base pattern" -msgstr "Базовий шаблон" +msgstr "Основний шаблон" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "Лінія підтримки" msgid "Rectilinear grid" @@ -13350,7 +16263,7 @@ msgstr "Шаблон інтерфейсу" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "Шаблон підтримки. Шаблон за замовчуванням для нерозчинної підтримки - " "прямолінійний, у той час як шаблон за замовчуванням для розчинної підтримки- " @@ -13360,18 +16273,18 @@ msgid "Rectilinear Interlaced" msgstr "Прямолінійний черезрядковий" msgid "Base pattern spacing" -msgstr "Базовий інтервал шаблону" +msgstr "Інтервал основного шаблону" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "Відстань між лініями підтримки" msgid "Normal Support expansion" msgstr "Нормальне розширення підтримки" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Розширити (+) або зменшити (-) горизонтальний проліт підтримки" -msgid "Speed of support" +msgid "Speed of support." msgstr "Швидкість підтримки" msgid "" @@ -13389,29 +16302,32 @@ msgstr "" "об'єкта.\n" "Для підтримок органічний, більш агресивно з'єднує гілки та економить багато " "матеріалу (за замовчуванням органічний), тоді як гібридний стиль створить " -"структуру, схожу на звичайну опору під великими пласкими звисами." +"структуру, схожу на звичайну опору під великими пласкими нависаннями." + +msgid "Default (Grid/Organic)" +msgstr "За замовчуванням (Сітка/Органічна)" msgid "Snug" -msgstr "Обережний" - -msgid "Tree Slim" -msgstr "Деревоподібна тонка" - -msgid "Tree Strong" -msgstr "Деревоподібна сильна" - -msgid "Tree Hybrid" -msgstr "Деревоподібна гібридна" +msgstr "Обережні" msgid "Organic" -msgstr "Органічна" +msgstr "Органічні" + +msgid "Tree Slim" +msgstr "Дерево тонкі" + +msgid "Tree Strong" +msgstr "Дерево міцні" + +msgid "Tree Hybrid" +msgstr "Дерево гібридні" msgid "Independent support layer height" -msgstr "Незалежна висота опорного шару" +msgstr "Незалежна висота шарів підтримки" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "Опорний шар використовує висоту шару, що не залежить від шару об'єкта. Це " @@ -13424,19 +16340,31 @@ msgstr "Кут порога" msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." -msgstr "Буде створена опора для звисів з кутом нахилу нижче порога." +msgstr "Буде створена опора для нависань з кутом нахилу нижче порогу." + +msgid "Threshold overlap" +msgstr "Поріг накладання" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Якщо пороговий кут дорівнює нулю, підтримка буде генеруватися для нависань, " +"перекриття яких знаходиться нижче порогу. Чим менше це значення, тим крутіше " +"нависання можна надрукувати без підтримки." msgid "Tree support branch angle" msgstr "Кут гілки опори дерева" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"Цей параметр визначає максимальний кут звису, який допускається для Гілки " -"підтримки дерева. Якщо кут збільшено, гілки можуть друкуватись " -"більшегоризонтально, дозволяючи їм досягати більшої відстані." +"Цей параметр визначає максимальний кут нависань, який допускається для гілки " +"деревоподібної підтримки. Якщо кут збільшено, гілки можуть друкуватись більш " +"горизонтально, дозволяючи їм досягати більшої відстані." msgid "Preferred Branch Angle" msgstr "Бажаний кут повороту гілки" @@ -13470,35 +16398,25 @@ msgid "" "needed." msgstr "" "Регулює щільність опорної структури, яка використовується для створення " -"кінчиків гілок. Вище значення призводить до кращих звисів, але опори важче " +"кінчиків гілок. Вище значення призводить до кращих нависань, але опори важче " "видаляти, тому рекомендується увімкнути верхні опорні інтерфейси замість " "високого значення щільності гілок, якщо потрібні щільні інтерфейси." -msgid "Adaptive layer height" -msgstr "Адаптивна ширина шару" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "" -"Включення цієї опції означає, що висота шару підтримки дерева, за " -"виключенням першого, буде розрахована автоматично " - msgid "Auto brim width" msgstr "Автоматична ширина кайми" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "" -"Увімкнення цієї опції означає, що ширина поля для підтримки дерева " -"будерозрахована автоматично" +"Увімкнення цієї опції означає, що ширина кайми для деревоподібної підтримки " +"буде розрахована автоматично" msgid "Tree support brim width" -msgstr "Ширина кайми деревовидної підтримки" +msgstr "Ширина кайми деревоподібної підтримки" -msgid "Distance from tree branch to the outermost brim line" -msgstr "Відстань від гілки дерева до зовнішньої крайньої лінії кайми" +msgid "Distance from tree branch to the outermost brim line." +msgstr "Відстань від гілки дерева до останньої зовнішньої лінії кайми" msgid "Tip Diameter" msgstr "Діаметр кінчика" @@ -13528,89 +16446,138 @@ msgstr "" "Кут 0 призведе до того, що гілки матимуть рівномірну товщину по всій " "довжині. Невеликий кут може збільшити стабільність органічної опори." -msgid "Branch Diameter with double walls" -msgstr "Діаметр гілки з двома стінками" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"Гілки, площа яких більша за площу кола цього діаметру, будуть надруковані з " -"подвійними стінками для стабільності. Встановіть це значення рівним нулю, " -"щоб не друкувати подвійні стінки." - msgid "Support wall loops" msgstr "Опорні стінові петлі" -msgid "This setting specify the count of walls around support" -msgstr "Цей параметр визначає кількість стінок навколо підтримки" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Ця налаштування визначає кількість опорних стінок в діапазоні [0,2]. 0 " +"означає автоматичний режим." msgid "Tree support with infill" msgstr "Підтримка дерева із заповненням" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "" "Цей параметр визначає, чи слід додавати заповнення всередині " "великихПорожнини підтримки дерева" +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" + msgid "Activate temperature control" msgstr "Увімкнути контроль температури" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"Увімкніть цю опцію для керування температурою в камері. Перед " -"\"machine_start_gcode\" буде додано команду M191\n" -"Команди G-коду: M141/M191 S(0-255)" +"Увімкніть цей параметр для автоматичного керування температурою камери. Цей " +"параметр активує відправку команди M191 перед \"machine_start_gcode\", \n" +"що задає температуру камери та очікує її досягнення. Крім того, в кінці " +"друку він відправляє команду M141 для вимкнення нагрівача камери, якщо він " +"присутній.\n" +"\n" +"Цей параметр залежить від підтримки команд M191 і M141 у мікропрограмі, як " +"через макроси, так і нативно, і зазвичай використовується при встановленому " +"активному нагрівачі камери." msgid "Chamber temperature" msgstr "Температура в камері" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"Вища температура камери може допомогти стримувати або зменшувати деформацію " -"та, можливо, підвищити міцність зв’язку між шарами для матеріалів високої " -"температури, таких як ABS, ASA, PC, PA тощо. У той же час, повітряна " -"фільтрація для ABS та ASA може стати гіршею. Однак для PLA, PETG, TPU, PVA " -"та інших матеріалів низької температури фактична температура камери не " -"повинна бути високою, щоб уникнути засмічення, тому рекомендується вимкнути " -"температуру камери (0)" +"Для високо-температурних матеріалів, таких як ABS, ASA, PC і PA, підвищена " +"температура камери може допомогти придушити або зменшити деформацію і " +"потенційно покращити міцність міжшарового з'єднання. Однак водночас вища " +"температура камери знижує ефективність повітряної фільтрації для ABS і ASA.\n" +"\n" +"Для PLA, PETG, TPU, PVA та інших низько-температурних матеріалів цей " +"параметр слід вимкнути (встановити 0), оскільки температура камери повинна " +"бути низькою, щоб уникнути засмічення екструдера через розм'якшення " +"матеріалу в зоні теплового бар'єра.\n" +"\n" +"Якщо цей параметр увімкнено, він також встановлює змінну gcode під назвою " +"chamber_temperature, яку можна використовувати для передавання бажаної " +"температури камери у макрос запуску друку або макрос прогріву, наприклад:\n" +"PRINT_START (інші змінні) CHAMBER_TEMP=[chamber_temperature].\n" +"Це може бути корисним, якщо ваш принтер не підтримує команди M141/M191 або " +"якщо ви хочете керувати прогрівом камери у макросі запуску друку за " +"відсутності активного нагрівача камери." -msgid "Nozzle temperature for layers after the initial one" -msgstr "Температура сопла для шарів після початкового" +msgid "Nozzle temperature for layers after the initial one." +msgstr "Температура сопла для шарів після першого" msgid "Detect thin wall" msgstr "Виявлення тонкої стінки" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" -"Визначте тонку стінку, яка не може містити дві лінії. І використовувати один " -"рядок для друку. Може бути надрукований не дуже добре, бо це не замкнутий " -"контур" +"Виявляти тонкі стінки, товщина яких менше ніж ширина двох ліній і " +"використовувати лише одну лінію для друку. Можуть бути надруковані не дуже " +"добре, оскільки вони не являються замкнутим контуром" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "" "Цей gcode вставляється при зміні філаменту, включаючи команду T для запуску " "зміни інструменту" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "Цей gcode вставляється, коли змінюється роль екструзії" msgid "" @@ -13620,16 +16587,16 @@ msgstr "" "Ширина лінії для верхніх поверхонь. Якщо виражено у %, вона буде розрахована " "по діаметру сопла." -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "Швидкість суцільного заповнення верхньої поверхні" msgid "Top shell layers" -msgstr "Суцільних шарів зверху" +msgstr "Шари верхньої оболонки" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "Це кількість суцільних шарів верхньої оболонки, включаючи верхнійповерхневий " "шар. Якщо товщина, розрахована за цим значенням, меншатовщини верхньої " @@ -13645,8 +16612,8 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "Кількість верхніх суцільних шарів збільшується при розрізанні, якщо товщина, " "обчислена шарами верхньої оболонки, тонша за це значення. Це дозволяє " @@ -13654,39 +16621,59 @@ msgstr "" "налаштування вимкнено і товщина верхньої оболонки повністюобмежена верхніми " "шарами оболонки" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "Швидкість переміщення, яка є швидше і без екструзії" msgid "Wipe while retracting" -msgstr "Ретракт при очищенні" +msgstr "Протирати під час втягування" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "Переміщуйте насадку по останньому шляху видавлювання при збиранні для " "очищеннявитеклого матеріалу на насадці. Це може мінімізувати великий " "двійковийоб'єкт під час друку нової деталі після переміщення" msgid "Wipe Distance" -msgstr "Відстань очищення" +msgstr "Протяжність протирання" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" "Опишіть, як довго сопло буде рухатися вздовж останньої траєкторії під час " -"втягування. \n" +"втягування.\n" "\n" "Залежно від тривалості операції витирання, швидкості та тривалості " -"втягування екструдера/нитки, може знадобитися рух накату для нитки. \n" +"втягування екструдера/нитки, може знадобитися рух накату для нитки.\n" "\n" "Якщо встановити значення у параметрі \"Кількість втягування перед витиранням" "\" нижче, надлишкове втягування буде виконано перед витиранням, інакше воно " @@ -13701,33 +16688,44 @@ msgstr "" "стабілізації тиску в камері всередині сопла, щоб уникнути " "дефектівзовнішнього вигляду під час друку предметів." +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "Обсяг очищення" msgid "Flush multiplier" -msgstr "Множина очищення" +msgstr "Множник промивки" msgid "" "The actual flushing volumes is equal to the flush multiplier multiplied by " "the flushing volumes in the table." msgstr "" -"Фактичні обсяги промивки дорівнюють множнику промивки, помноженому на " -"обсягипромивання в таблиці." +"Фактичні об'єми промивки дорівнюють множнику промивки, помноженому на обсяг " +"промивки в таблиці." msgid "Prime volume" -msgstr "Основний обсяг" +msgstr "Об'єм підготовки" msgid "The volume of material to prime extruder on tower." -msgstr "Обсяг матеріалу для первинного екструдера на башті." +msgstr "Об'єм матеріалу для підготовки екструдера на вежі." -msgid "Width of prime tower" -msgstr "Ширина основної вежі" +msgid "Width of the prime tower." +msgstr "Ширина підготовчої вежі" msgid "Wipe tower rotation angle" -msgstr "Кут повороту вежі витирання" +msgstr "Кут повороту вежі протирання" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Кут повороту вежі витирання за віссю Х." +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Кут повороту вежі протирання за віссю Х." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" msgid "Stabilization cone apex angle" msgstr "Кут нахилу вершини стабілізаційного конуса" @@ -13736,17 +16734,11 @@ msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." msgstr "" -"Кут на вершині конуса, який використовується для стабілізації очисної вежі. " -"Чим більший кут, тим ширша основа." - -msgid "Wipe tower purge lines spacing" -msgstr "Протерти відстань між лініями продувки башти" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "Відстань між лініями продувки на протиральній башті." +"Кут на вершині конуса, який використовується для стабілізації вежі " +"протирання. Чим більший кут, тим ширша основа." msgid "Maximum wipe tower print speed" -msgstr "Максимальна швидкість друку протиральної башти" +msgstr "Максимальна швидкість друку вежі протирання" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " @@ -13762,7 +16754,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -13790,15 +16782,45 @@ msgstr "" "Для зовнішніх периметрів вежі витирання використовується швидкість " "внутрішнього периметра незалежно від цього параметра." -msgid "Wipe tower extruder" -msgstr "Очисна башта екструдера" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"Екструдер для друку по периметру очищувальної вежі. Встановіть значення 0, " -"щоб використовувати той, що є в наявності (бажано нерозчинний)." +"Екструдер використаний для друку по периметру вежі проирання. Встановіть " +"значення 0, щоб використовувати той, що є в наявності (бажано нерозчинний)." msgid "Purging volumes - load/unload volumes" msgstr "Обсяги очищення - обсяги завантаження/розвантаження" @@ -13809,8 +16831,20 @@ msgid "" "volumes below." msgstr "" "Цей вектор зберігає необхідні об'єми для заміни кожного інструменту, що " -"використовується на вежі. Ці значення використовуються для спрощення " -"створення повних об'ємів очищення нижче." +"використовується на вежі. Ці протирання значення використовуються для " +"спрощення створення повних об'ємів очищення нижче." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" msgid "" "Purging after filament change will be done inside objects' infills. This may " @@ -13835,27 +16869,61 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"Цей об'єкт використовуватиметься для продування сопла після зміни нитки " -"розжареннядля економії нитки розжарення та зменшення часу друку. В " -"результаті кольору об'єктів будуть змішані. Він не набуде чинності, якщо не " -"включена первиннавежа." +"Цей об'єкт буде використаний для очищення сопла після зміни філаменту для " +"економії філаменту та зменшення часу друку. В результаті кольори об'єктів " +"будуть змішані. Ця опція не набуде чинності, поки не включена підготовча " +"вежа." msgid "Maximal bridging distance" msgstr "Максимальна мостова відстань" msgid "Maximal distance between supports on sparse infill sections." -msgstr "Максимальна відстань між підтримками на рідкісних ділянках заповнення." +msgstr "" +"Максимальна відстань між підтримками на ділянках часткового заповнення." + +msgid "Wipe tower purge lines spacing" +msgstr "Відстань між лініями очищення на вежі протирання" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Відстань між лініями очищення на вежі протирання." + +msgid "Extra flow for purging" +msgstr "Додатковий потік для очищення" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Додатковий потік для ліній очистки на вежі протирання. Це робить лінії " +"очистки товщими або вужчими, ніж зазвичай. Відстань між лініями " +"налаштовується автоматично." + +msgid "Idle temperature" +msgstr "Температура очікування" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Температура сопла, коли інструмент наразі не використовується в " +"багатоголових налаштуваннях. Використовується лише тоді, коли у параметрах " +"друку активовано 'Запобігання підтікання'. Встановіть значення 0, щоб " +"вимкнути." msgid "X-Y hole compensation" msgstr "Компенсація отвору XY" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" "Отвори об'єкта будуть вирощені або стиснуті в площині XY на задане Значення. " "Позитивне значення робить отвори більше. Негативне значення робить отвори " @@ -13865,11 +16933,12 @@ msgstr "" msgid "X-Y contour compensation" msgstr "Компенсація контуру XY" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" "Контур об'єкта буде збільшено або зменшено у площині XY на задане Значення. " "Позитивне значення робить контур більше. Негативне Зменшення контуру. Ця " @@ -13897,7 +16966,7 @@ msgstr "Межа виявлення полігону" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -13928,7 +16997,7 @@ msgstr "Формат мініатюр G-коду" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "" "Формат мініатюр G-коду: PNG для найкращої якості, JPG для найменшого " "розміру, QOI для прошивок з низьким об'ємом пам'яті" @@ -13937,10 +17006,10 @@ msgid "Use relative E distances" msgstr "Використовуйте відносні відстані E екструдера" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" "Відносна екструзія рекомендується при використанні опції \"label_objects\". " "Деякі екструдери працюють краще, якщо ця опція не включена (режим абсолютної " @@ -13950,15 +17019,12 @@ msgstr "" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "Класичний генератор стін виробляє стіни з постійною шириною екструзії, а для " "дуже тонких ділянок використовується заповнення прогалин. Двигун Arachne " "виробляє стіни зі змінною шириною екструзії." -msgid "Classic" -msgstr "Класичний" - msgid "Arachne" msgstr "Arachne" @@ -13968,7 +17034,7 @@ msgstr "Довжина переходу до периметру" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "При переході між різними числами периметрів, коли деталь стає тонше, для " "поділу або з'єднання сегментів периметрів виділяєтьсяпевна кількість " @@ -13984,7 +17050,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "Запобігання переходу назад і вперед між однією додатковою стінкою та однієї " "менше. Це поле розширює діапазон ширини видавлювання до [Мінімальна ширина " @@ -14002,7 +17068,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "Коли створювати переходи між парним та непарним числом периметрів. Форма " "Клина з кутом більше цього параметра не буде мати переходів, і периметри Не " @@ -14015,7 +17081,7 @@ msgstr "Лічильник розподілу за периметрами" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "Кількість периметрів, що відраховується від центру, яким потрібно розкидати " "варіацію. Нижчі значення означають, що зовнішні периметри не змінюються по " @@ -14026,14 +17092,10 @@ msgstr "Мінімальний розмір об'єкта" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the minimum " -"feature size will be widened to the minimum wall width. It's expressed as a " -"percentage over nozzle diameter" msgid "Minimum wall length" msgstr "Мінімальна довжина стінок" @@ -14043,9 +17105,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Налаштуйте це значення, щоб запобігти друкуванню коротких незакритих стін, " @@ -14070,7 +17132,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "Ширина периметра, яка замінить тонкі елементи (відповідно до Мінімальним " "розміром елемента) моделі. Якщо мінімальна ширина периметра менше товщини " @@ -14078,17 +17140,17 @@ msgstr "" "виражається у відсотках від діаметра сопла" msgid "Detect narrow internal solid infill" -msgstr "Виявлення вузького внутрішнього заповнення твердим тілом" +msgstr "Виявлення вузького внутрішнього суцільного заповнення" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого " -"тіла. Якщо цей параметр увімкнено, для прискорення друку області " -"використовуватиметься концентричний візерунок. Інакше за умовчанням " -"Використовується прямолінійний малюнок." +"Ця опція автоматично визначає вузькі ділянки внутрішню суцільного " +"заповнення. Якщо цей параметр увімкнено, для ділянки буде застосовано " +"концентричний шаблон, що прискорює друк. Інакше за умовчанням " +"використовується прямолінійний шаблон." msgid "invalid value " msgstr "неправильне значення " @@ -14102,28 +17164,151 @@ msgstr "надто велика ширина лінії " msgid " not in range " msgstr " не в зоні " +msgid "Export 3MF" +msgstr "Експортувати 3MF" + +msgid "Export project as 3MF." +msgstr "Експортувати проєкт як 3MF." + +msgid "Export slicing data" +msgstr "Експортувати дані нарізки" + +msgid "Export slicing data to a folder." +msgstr "Експортувати дані нарізки у папку." + +msgid "Load slicing data" +msgstr "Завантажити дані про нарізку" + +msgid "Load cached slicing data from directory." +msgstr "Завантажити кешовані дані нарізки з каталогу" + +msgid "Export STL" +msgstr "Експортувати STL" + +msgid "Export the objects as single STL." +msgstr "Експортувати об'єкти як єдиний STL." + +msgid "Export multiple STLs" +msgstr "Експортувати декілька STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Експортувати об'єкти як декілька STL у папку" + +msgid "Slice" +msgstr "Нарізка" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Нарізати пластини: 0-всі пластини, i-пластина i, інші-неприпустимі" + +msgid "Show command help." +msgstr "Показати довідку про команду." + +msgid "UpToDate" +msgstr "До цього часу" + +msgid "Update the config values of 3MF to latest." +msgstr "Оновіть значення конфігурації 3MF до останніх." + +msgid "downward machines check" +msgstr "Перевірка зворотної сумісності принтера" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"Перевірити, чи поточний принтер сумісний із попередніми моделями у списку" + +msgid "Load default filaments" +msgstr "Завантажити стандартні філаменти" + +msgid "Load first filament as default for those not loaded." +msgstr "Завантажити перший філамент як стандартний для тих, що не завантажені" + msgid "Minimum save" msgstr "Мінімум" -msgid "export 3mf with minimum size." -msgstr "експортувати 3mf з мінімальним розміром." +msgid "Export 3MF with minimum size." +msgstr "експортувати 3MF з мінімальним розміром." + +msgid "mtcpp" +msgstr "" + +msgid "max triangle count per plate for slicing." +msgstr "максимальна кількість трикутників на стіл для нарізки." + +msgid "mstpp" +msgstr "" + +msgid "max slicing time per plate in seconds." +msgstr "максимальний час нарізки на стіл у секундах." msgid "No check" msgstr "Без перевірки" -msgid "Do not run any validity checks, such as gcode path conflicts check." +#, fuzzy +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" "Не виконуйте перевірки дійсності, наприклад, перевірку конфліктів шляхуgcode." +msgid "Normative check" +msgstr "Нормативна перевірка" + +msgid "Check the normative items." +msgstr "Перевірте нормативні позиції." + +msgid "Output Model Info" +msgstr "Вихідна інформація про модель" + +msgid "Output the model's information." +msgstr "Виведіть інформацію про модель." + +msgid "Export Settings" +msgstr "Експортувати налаштування" + +msgid "Export settings to a file." +msgstr "Експортувати налаштування у файл." + +msgid "Send progress to pipe" +msgstr "Надіслати прогрес до каналу" + +msgid "Send progress to pipe." +msgstr "Надіслати прогрес до каналу." + +msgid "Arrange Options" +msgstr "Упорядкувати параметри" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Параметри упорядкування: 0-disable, 1-enable, інші-auto" + +msgid "Repetition count" +msgstr "Кількість повторень" + +msgid "Repetition count of the whole model." +msgstr "Кількість повторень всієї моделі" + msgid "Ensure on bed" msgstr "Переконайтеся, що на столі" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "" "Підніміть об'єкт над ліжком, коли він частково знаходиться під ним. За " "замовчуванням вимкнено" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Розташувати поставлені моделі на платформі та об’єднати їх в одну модель, " +"щоб виконати дії один раз." + +msgid "Convert Unit" +msgstr "Перетворити одиницю виміру" + +msgid "Convert the units of model." +msgstr "Перетворення одиниць моделі" + msgid "Orient Options" msgstr "Параметри орієнтації" @@ -14133,12 +17318,80 @@ msgstr "Орієнтація: 0 - вимкнено, 1 - увімкнено, ін msgid "Rotation angle around the Z axis in degrees." msgstr "Кут обертання навколо осі Z у градусах." +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "Обертати навколо осі Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Кут обертання навколо осі Y у градусах." +msgid "Scale the model by a float factor." +msgstr "Масштабуйте модель за допомогою плаваючого коефіцієнта" + +msgid "Load General Settings" +msgstr "Завантажити загальні налаштування" + +msgid "Load process/machine settings from the specified file." +msgstr "Завантажити налаштування процесу/машини із зазначеного файлу" + +msgid "Load Filament Settings" +msgstr "Завантажити налаштування філаменту" + +msgid "Load filament settings from the specified file list." +msgstr "Завантажити налаштування філаменту із зазначеного списку файлів" + +msgid "Skip Objects" +msgstr "Пропустити об'єкти" + +msgid "Skip some objects in this print." +msgstr "Пропустити деякі об'єкти в цьому принті" + +msgid "Clone Objects" +msgstr "Клонувати об'єкти" + +msgid "Clone objects in the load list." +msgstr "Клонувати об'єкти в списку завантаження" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "" + +msgid "Load assemble list" +msgstr "Завантажити список збірок" + +msgid "Load assemble object list from config file." +msgstr "Завантажити список збірок об'єктів з файлу конфігурації" + msgid "Data directory" msgstr "Каталог даних" @@ -14150,22 +17403,119 @@ msgstr "" "Завантажити та зберегти налаштування в даному каталозі. Це корисно для " "підтримки різних профілів або для ввімкнення конфігурацій із сховища мережі." -msgid "Load custom gcode" +msgid "Output directory" +msgstr "Вихідний каталог" + +msgid "Output directory for the exported files." +msgstr "Цільова папка для експортованих файлів." + +msgid "Debug level" +msgstr "Рівень налагодження" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, 2: " +"попередження, 3: інформація, 4: налагодження, 5: трасування\n" + +msgid "Enable timelapse for print" +msgstr "Увімкнути таймлапс для друку" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Якщо ввімкнено, це нарізання враховуватиме використання таймлапсу" + +#, fuzzy +msgid "Load custom G-code" msgstr "Завантажити користувацький gcode" -msgid "Load custom gcode from json" +#, fuzzy +msgid "Load custom G-code from json." msgstr "Завантажити користувацький код з json" -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "Завантажувати id філаментів" + +msgid "Load filament IDs for each object." +msgstr "" + +msgid "Allow multiple colors on one plate" +msgstr "Дозволити декілька кольорів на одній пластині" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "" +"Якщо ввімкнено, розташування дозволить використовувати кілька кольорів на " +"одній платформі" + +msgid "Allow rotation when arranging" +msgstr "Дозволити обертання під час розташування" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "Якщо ввімкнено, буде дозволено обертання під час розташування об'єкта" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Уникати області калібрування екструзії під час розташування моделей" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "" +"Якщо ввімкнено, розташування моделей уникатиме області калібрування екструзії" + +#, fuzzy +msgid "Skip modified G-code in 3MF" +msgstr "Пропустити змінені gcodes в 3MF" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" + +msgid "MakerLab name" +msgstr "Назва MakerLab" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "Назва MakerLab для створення цього 3MF." + +msgid "MakerLab version" +msgstr "Версія MakerLab" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "Версія MakerLab для створення цього 3MF." + +msgid "Metadata name list" +msgstr "список назв метаданих" + +#, fuzzy +msgid "Metadata name list added into 3MF." +msgstr "список назв метаданих додано в 3MF." + +msgid "Metadata value list" +msgstr "список значень метаданих" + +#, fuzzy +msgid "Metadata value list added into 3MF." +msgstr "список значень метаданих додано в 3MF." + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced" +msgstr "Дозволити нарізання 3MF в новішій версії" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced." +msgstr "Дозволити нарізання 3MF в новішій версії." + +msgid "Current Z-hop" msgstr "Поточний Z-стрибок" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Містить Z-стрибок, присутній на початку користувацького блоку G-коду." msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" "Позиція екструдера на початку блоку користувацького G-коду. Якщо " "користувацький G-код переміщується в інше місце, він повинен бути записаний " @@ -14175,18 +17525,28 @@ msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" "Стан втягування на початку блоку користувацького G-коду. Якщо користувацький " "G-код переміщує вісь екструдера, він повинен записати в цю змінну, щоб " "PrusaSlicer коректно робив накат, коли повертає керування." -msgid "Extra deretraction" +msgid "Extra de-retraction" msgstr "Додаткове втягування" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." msgstr "В даний час планується додаткове ґрунтування екструдера після накату." +msgid "Absolute E position" +msgstr "Абсолютна позиція E" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Поточна позиція осі екструдера. Використовується тільки при абсолютному " +"адресуванні екструдера." + msgid "Current extruder" msgstr "Поточний екструдер" @@ -14204,10 +17564,10 @@ msgstr "" "даний момент." msgid "Has wipe tower" -msgstr "Має протиральну вежу" +msgstr "Має вежу протирання" msgid "Whether or not wipe tower is being generated in the print." -msgstr "Незалежно від того, чи створюється вежа витирання на відбитку чи ні." +msgstr "Створювати або ні вежу протирання при друці." msgid "Initial extruder" msgstr "Початковий екструдер" @@ -14232,27 +17592,35 @@ msgstr "" msgid "Is extruder used?" msgstr "Чи використовується екструдер?" -msgid "Vector of bools stating whether a given extruder is used in the print." +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" "Вектор bool, що вказує на те, чи використовується даний екструдер у друці." +msgid "Has single extruder MM priming" +msgstr "" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" + msgid "Volume per extruder" msgstr "Об'єм на один екструдер" msgid "Total filament volume extruded per extruder during the entire print." -msgstr "Загальний об'єм нитки, екструдованої одним екструдером за весь друк." +msgstr "" +"Загальний об'єм філаменту, екструдованого одним екструдером за весь друк." -msgid "Total toolchanges" +msgid "Total tool changes" msgstr "Повні зміни інструменту" -msgid "Number of toolchanges during the print." +msgid "Number of tool changes during the print." msgstr "Кількість замін під час друку." msgid "Total volume" msgstr "Загальний обсяг" msgid "Total volume of filament used during the entire print." -msgstr "Загальний об’єм нитки, використаної під час усього друку." +msgstr "Загальний об’єм філаменту, використаного під час усього друку." msgid "Weight per extruder" msgstr "Вага одного екструдера" @@ -14299,11 +17667,11 @@ msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" "Містить рядок з інформацією про те, який масштаб було застосовано до окремих " "об'єктів. Базова індексація об'єктів нульова (перший об'єкт має індекс 0).\n" -"Приклад: 'x:100% y:50% z:100'." +"Приклад: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Введіть назву файлу без розширення" @@ -14312,11 +17680,11 @@ msgid "Source filename of the first object, without extension." msgstr "Ім'я вихідного файлу першого об'єкта без розширення." msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "Вектор має два елементи: X і Y координати точки. Значення в мм." msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" "Вектор має два елементи: розміри X і Y обмежувальної рамки. Значення в мм." @@ -14364,6 +17732,9 @@ msgstr "Година" msgid "Minute" msgstr "Минута" +msgid "Second" +msgstr "Секунд" + msgid "Print preset name" msgstr "Друк назви попередньо налаштованої" @@ -14371,7 +17742,7 @@ msgid "Name of the print preset used for slicing." msgstr "Назва стилю друку, яка використовується для нарізки." msgid "Filament preset name" -msgstr "Попередня назва нитки" +msgstr "Ім'я профілю філаменту" msgid "" "Names of the filament presets used for slicing. The variable is a vector " @@ -14393,13 +17764,23 @@ msgstr "Ім'я фізичного принтера" msgid "Name of the physical printer used for slicing." msgstr "Назва фізичного принтера, який використовується для нарізки." +msgid "Number of extruders" +msgstr "Кількість екструдерів" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Загальна кількість екструдерів, незалежно від того, чи використовуються вони " +"в поточному друці." + msgid "Layer number" msgstr "Номер шару" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Індекс поточного шару. На одній основі (тобто перший шар номер 1)." -msgid "Layer z" +msgid "Layer Z" msgstr "Шар Z" msgid "" @@ -14408,14 +17789,14 @@ msgid "" msgstr "" "Висота поточного шару над поверхнею стола, виміряна до верхньої частини шару." -msgid "Maximal layer z" +msgid "Maximal layer Z" msgstr "Максимальний шар Z" msgid "Height of the last layer above the print bed." msgstr "Висота останнього шару над друкарським столом." msgid "Filament extruder ID" -msgstr "ID номер екструдера нитки" +msgstr "ID номер екструдера філаменту" msgid "The current extruder ID. The same as current_extruder." msgstr "Поточний ідентифікатор екструдера. Те саме, що й current_extruder." @@ -14435,9 +17816,6 @@ msgstr "Створення траєкторії заповнення" msgid "Detect overhangs for auto-lift" msgstr "Виявлення виступів для автоматичного підйому" -msgid "Generating support" -msgstr "Генерація підтримки" - msgid "Checking support necessity" msgstr "Перевірка необхідності підтримки" @@ -14458,6 +17836,9 @@ msgstr "" "Схоже, об'єкт %s має %s. Змініть орієнтацію об'єкта або увімкніть Створення " "підтримки." +msgid "Generating support" +msgstr "Генерація підтримки" + msgid "Optimizing toolpath" msgstr "Оптимізація траєкторії інструменту" @@ -14474,42 +17855,32 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "Компенсація розміру XY об'єкта не буде використовуватись, оскільки він також " "забарвлений кольором.\n" "Компенсація розміру XY не може поєднуватися з кольором." -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "Підтримка: створення траєкторії інструмента на шарі %d" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "Підтримка: виявлення звисів" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "Підтримка: створення точок контакту" -msgid "Support: propagate branches" -msgstr "Підтримка: розповсюдження гілок" +msgid "Loading of a model file failed." +msgstr "Не вдалося завантажити файл моделі." -msgid "Support: draw polygons" -msgstr "Підтримка: малювання полігонів" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "Підтримка: створення траєкторії інструменту" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "Підтримка: створення полігонів на шарі %d" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "Підтримка: фіксація отворів на шарі %d" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "Підтримка: розповсюдження гілок на шарі %d" +msgid "The supplied file couldn't be read because it's empty" +msgstr "Наданий файл не вдалося прочитати, оскільки він порожній" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -14517,20 +17888,11 @@ msgstr "" "Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." "amf (.xml)." -msgid "Loading of a model file failed." -msgstr "Не вдалося завантажити файл моделі." - -msgid "The supplied file couldn't be read because it's empty" -msgstr "Наданий файл не вдалося прочитати, оскільки він порожній" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" "Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." "amf." -msgid "Canceled" -msgstr "Скасовано" - msgid "load_obj: failed to parse" msgstr "помилка завантаження файлу OBJ: не вдалося розпізнати формат" @@ -14551,7 +17913,7 @@ msgstr "" "Цей файл формату OBJ не може бути прочитаний через те, що він порожній." msgid "Flow Rate Calibration" -msgstr "Калібрування витрати матеріалу" +msgstr "Калібрування потоку" msgid "Max Volumetric Speed Calibration" msgstr "Максимальна калібрування об’ємної швидкості" @@ -14612,7 +17974,7 @@ msgid "Flow Dynamics" msgstr "Динаміка потоку" msgid "Flow Rate" -msgstr "Швидкість потоку" +msgstr "Потік" msgid "Max Volumetric Speed" msgstr "Максимальна об’ємна швидкість" @@ -14623,7 +17985,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "Будь ласка, введіть дійсні значення:\n" "Початкове значення: >= %.1f\n" @@ -14635,7 +17997,7 @@ msgid "The name cannot be empty." msgstr "Ім’я не може бути порожнім." #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "Обраний пресет: %s не знайдено." msgid "The name cannot be the same as the system preset name." @@ -14647,6 +18009,14 @@ msgstr "Назва така сама, як інша існуюча назва н msgid "create new preset failed." msgstr "не вдалося створити новий передвстановлений параметр." +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "" @@ -14669,23 +18039,20 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Цей тип машини може зберігати лише 16 результатів історії на сопло. Ви " "можете видалити існуючі історичні результати та потім розпочати " "калібрування. Або ви можете продовжити калібрування, але ви не зможете " -"створювати нові історичні результати калібрування. \n" +"створювати нові історичні результати калібрування.\n" "Ви все ще хочете продовжити калібрування?" -msgid "Connecting to printer..." -msgstr "Підключення до принтера…" - -msgid "The failed test result has been dropped." -msgstr "Неуспішний результат тесту було відхилено." - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "Результат калібрування динаміки потоку було збережено в принтері" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -14697,6 +18064,13 @@ msgstr "" "Зберігається лише один з результатів з такою самою назвою. Ви впевнені, що " "хочете перезаписати історичний результат?" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " @@ -14705,18 +18079,25 @@ msgstr "" "Цей тип машини може зберігати лише %d результатів історії на сопло. Цей " "результат не буде збережений." +msgid "Connecting to printer..." +msgstr "Підключення до принтера…" + +msgid "The failed test result has been dropped." +msgstr "Неуспішний результат тесту було відхилено." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Результат калібрування динаміки потоку було збережено в принтері" + msgid "Internal Error" msgstr "Внутрішня помилка" msgid "Please select at least one filament for calibration" msgstr "Будь ласка, виберіть принаймні один матеріал для калібрування" -msgid "Flow rate calibration result has been saved to preset" -msgstr "" -"Результат калібрування витрати матеріалу було збережено в налаштування за " -"замовчуванням" +msgid "Flow rate calibration result has been saved to preset." +msgstr "Результат калібрування потоку було збережено до профілю" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "" "Результат калібрування максимальної об’ємної швидкості було збережено в " "налаштування попередньо заданого значення" @@ -14730,20 +18111,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"Зараз у нас є можливість автоматичної калібрації для різних філаментів, яка " -"є повністю автоматизованою, і результат буде збережено в принтері для " -"подальшого використання. Вам потрібно робити калібрування лише в таких " -"обмежених випадках:\n" -"\n" -"1. Якщо ви вводите новий філамент різних брендів/моделей або філамент " -"зволожений;\n" -"2. Якщо сопло зношене або замінене новим;\n" -"3. Якщо максимальна об’ємна швидкість або температура друку змінена в " -"налаштуваннях філаменту." msgid "About this calibration" msgstr "Про це калібрування" @@ -14767,20 +18138,38 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"Будь ласка, знайдіть деталі калібрування динаміки потоку на нашій Вікі.\n" +"\n" +"Зазвичай калібрування не є необхідним. Коли ви починаєте друк одним кольором/" +"матеріалом з увімкненою опцією “калібрування динаміки потоку” в меню початку " +"друку, принтер буде слідувати старому способу, калібруючи філамент перед " +"друком. Коли ви починаєте друк багатокольоровим/матеріалом, принтер " +"використовуватиме параметри компенсації за замовчуванням для філамента під " +"час кожної зміни філамента, що зазвичай дає добрий результат.\n" +"\n" +"Зверніть увагу, що є кілька випадків, які можуть зробити результати " +"калібрування ненадійними, такі як недостатня адгезія на робочій поверхні. " +"Поліпшити адгезію можна, вимивши робочу поверхню або наносячи клей. Для " +"отримання додаткової інформації з цього питання зверніться до нашої Вікі.\n" +"\n" +"Результати калібрування мають приблизно 10% нестабільності в наших тестах, " +"що може призвести до того, що результати не будуть точно такими ж під час " +"кожного калібрування. Ми все ще досліджуємо корінні причини, щоб внести " +"поліпшення в нових оновленнях." msgid "When to use Flow Rate Calibration" -msgstr "Коли використовувати Калібрування рівня потоку" +msgstr "Коли використовувати Калібрування потоку" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "Після використання калібрування Flow Dynamics можуть все ще виникати деякі " "проблеми з екструзією, такі як:\n" @@ -14813,13 +18202,13 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"Калібрування швидкості потоку вимірює співвідношення очікуваного до " -"фактичного обсягу викиду. За замовчуванням цей налаштування добре працює на " -"принтерах Bambu Lab і з офіційними філаментами, оскільки вони були " -"попередньо калібровані та налаштовані. Для звичайного філаменту вам, як " -"правило, не потрібно виконувати калібрування швидкості потоку, якщо ви все " -"ще бачите вказані дефекти після проведення інших калібрувань. Для отримання " -"більш докладної інформації ознайомтеся з статтею у вікі." +"Калібрування потоку вимірює співвідношення очікуваного та фактичного об'єму " +"екструзії. Налаштування за замовчуванням добре працює на принтерах Bambu Lab " +"з офіційними філаментами, оскільки вони вже попередньо відкалібровані та " +"точно налаштовані. Для звичайного філаменту калібрування потоку зазвичай не " +"потрібне, окрім випадків коли після виконання інших калібрувань все ще " +"залишаються перераховані дефекти. Детальніше ви можете ознайомитися в статті " +"на вікі." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " @@ -14839,23 +18228,22 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"Автоматичне калібрування швидкості потоку використовує технологію Micro-" -"Lidar від Bambu Lab і безпосередньо вимірює калібровочні зразки. Однак " -"будьте попереджені, що ефективність і точність цього методу можуть бути " -"порушені для певних типів матеріалів. Зокрема, філаменти, які є прозорими чи " -"напівпрозорими, мають блискучі частинки або мають високий ступінь відбиття, " -"можуть бути не підходящими для цього калібрування і давати результати, які " -"не відповідають вимогам.\n" +"Автоматичне калібрування потоку використовує технологію Micro-Lidar від " +"Bambu Lab і безпосередньо вимірює зразки калібрування. Однак зверніть увагу, " +"що ефективність і точність цього методу можуть бути ненадійними для певних " +"типів матеріалу. Зокрема прозорі чи напівпрозорі філаменти, філаменти що " +"мають блискучі частинки або високий ступінь відбиття, можуть бути несумісні " +"з цим калібруванням і давати результати, які не відповідають дійсності.\n" "\n" "Результати калібрування можуть варіюватися між кожним калібруванням або " "філаментом. Ми постійно вдосконалюємо точність і сумісність цього " "калібрування завдяки оновленням в програмному забезпеченні.\n" "\n" -"Увага: Калібрування швидкості потоку - це складний процес, який слід " -"спробувати лише тим, хто повністю розуміє його призначення і наслідки. " -"Неправильне використання може призвести до неякісних друків або пошкодження " -"принтера. Будь ласка, перед тим як виконувати калібрування, докладно " -"ознайомтеся та розберіться у процесі." +"Увага: Калібрування потоку - це складний процес, який слід спробувати лише " +"тим, хто повністю розуміє його призначення і наслідки. Неправильне " +"налаштування може призвести до неякісного друку або пошкодження принтера. " +"Будь ласка, перед тим як виконувати калібрування, докладно ознайомтеся та " +"розберіться у процесі." msgid "When you need Max Volumetric Speed Calibration" msgstr "Коли вам потрібна калібрування максимальної об'ємної швидкості" @@ -14872,7 +18260,7 @@ msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "матеріалами зі значним термічним звуженням/розширенням, такими як..." msgid "materials with inaccurate filament diameter" -msgstr "матеріалами з неточним діаметром нитки" +msgstr "матеріалами з неточним діаметром філаменту" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Ми знайшли найкращий коефіцієнт калібрування динаміки потоку" @@ -14891,22 +18279,12 @@ msgstr "" "*Ми рекомендуємо вам додати бренд, матеріал, тип і навіть рівень вологості у " "назву" -msgid "Failed" -msgstr "Помилка" - msgid "Please enter the name you want to save to printer." msgstr "Будь ласка, введіть ім’я, яке ви хочете зберегти на принтері." msgid "The name cannot exceed 40 characters." msgstr "Ім’я не може перевищувати 40 символів." -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" -"Тільки один із результатів з однаковою назвою буде збережено. Ви впевнені, " -"що хочете перезаписати інші результати?" - msgid "Please find the best line on your plate" msgstr "Будь ласка, знайдіть найкращу лінію на вашій пластині" @@ -14917,23 +18295,19 @@ msgid "Input Value" msgstr "Введіть значення" msgid "Save to Filament Preset" -msgstr "Зберегти в попередньому матеріалі" - -msgid "Preset" -msgstr "Шаблон" +msgstr "Зберегти в Профіль Філаменту" msgid "Record Factor" msgstr "Фактор запису" msgid "We found the best flow ratio for you" -msgstr "Ми знайшли найкраще співвідношення потоку для вас" +msgstr "Ми знайшли найкраще співвідношення коефіцієнту потоку для вас" msgid "Flow Ratio" -msgstr "Співвідношення потоку" +msgstr "Коефіцієнт потоку" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "" -"Будь ласка, введіть дійсне значення (0.0 < співвідношення потоку < 2.0)" +msgstr "Будь ласка, введіть дійсне значення (0.0 < коефіцієнт потоку < 2.0)" msgid "Please enter the name of the preset you want to save." msgstr "Будь ласка, введіть назву шаблону, який ви хочете зберегти." @@ -14955,10 +18329,7 @@ msgstr "Пропустити калібрування2" #, c-format, boost-format msgid "flow ratio : %s " -msgstr "співвідношення потоку : %s " - -msgid "Please choose a block with smoothest top surface" -msgstr "Будь ласка, виберіть блок з найгладшою верхньою поверхнею" +msgstr "коєфіцієнт потоку : %s " msgid "Please choose a block with smoothest top surface." msgstr "Будь ласка, виберіть блок з найгладшою верхньою поверхнею." @@ -14975,7 +18346,7 @@ msgid "Complete Calibration" msgstr "Повне калібрування" msgid "Fine Calibration based on flow ratio" -msgstr "Точне калібрування на основі співвідношення потоку" +msgstr "Точне калібрування на основі коефіцієнту потоку" msgid "Title" msgstr "Назва" @@ -14984,28 +18355,43 @@ msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." msgstr "" -"Буде надруковано тестову модель. Будь ласка, очистіть стільцевий стіл та " -"поверніть його на гарячу ліжко перед калібруванням." +"Буде надруковано тестову модель. Будь ласка, очистіть робочу пластину та " +"поверніть його на гарячий стіл перед калібруванням." msgid "Printing Parameters" msgstr "Параметри друку" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" -msgstr "Тип стільця" +msgstr "Тип Пластини" msgid "filament position" -msgstr "положення нитки" - -msgid "External Spool" -msgstr "Зовнішній барабан" +msgstr "позиція філаменту" msgid "Filament For Calibration" -msgstr "Нитка для калібрування" +msgstr "Філамент для калібрування" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Поради щодо матеріалу для калібрування: \n" "- Матеріали, які можуть використовувати однакову температуру гарячого ліжка\n" @@ -15024,9 +18410,23 @@ msgstr "%s несумісний з %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU не підтримується для автокалібрування Flow Dynamics." +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "Підключення до принтера" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "Зі значення k" @@ -15045,6 +18445,9 @@ msgstr "З об'ємною швидкістю" msgid "To Volumetric Speed" msgstr "До об'ємної швидкості" +msgid "Are you sure you want to cancel this print?" +msgstr "Ви впевнені, що хочете скасувати цей друк?" + msgid "Flow Dynamics Calibration Result" msgstr "Результат калібрування динаміки потоку" @@ -15070,6 +18473,13 @@ msgstr "Цей тип машини може зберігати лише %d ре msgid "Edit Flow Dynamics Calibration" msgstr "Редагувати калібрування динаміки потоку" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "Нове калібрування динамічного потоку" @@ -15079,6 +18489,12 @@ msgstr "Добре" msgid "The filament must be selected." msgstr "Філамент повинен бути обраний." +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "Мережевий пошук" @@ -15112,19 +18528,16 @@ msgstr "" "Будь ласка, виберіть той, який слід використовувати." msgid "PA Calibration" -msgstr "Калібрування РА" - -msgid "DDE" -msgstr "Директ" - -msgid "Bowden" -msgstr "Боуден" +msgstr "Калібрування ВТ (РА)" msgid "Extruder type" msgstr "Тип екструдера" +msgid "DDE" +msgstr "Директ" + msgid "PA Tower" -msgstr "РА башта" +msgstr "РА Вежа" msgid "PA Line" msgstr "РА лінія" @@ -15133,22 +18546,40 @@ msgid "PA Pattern" msgstr "PA Патерн" msgid "Start PA: " -msgstr "Стартовий PA: " +msgstr "Початкове ВТ (PA): " msgid "End PA: " -msgstr "Кінцевий РА: " +msgstr "Кінцеве ВТ (РА): " msgid "PA step: " -msgstr "Крок PA: " +msgstr "Крок ВТ (PA): " + +msgid "Accelerations: " +msgstr "" + +msgid "Speeds: " +msgstr "" msgid "Print numbers" msgstr "Друк значень" +msgid "Comma-separated list of printing accelerations" +msgstr "" + +msgid "Comma-separated list of printing speeds" +msgstr "" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "Введіть допустимі значення:\n" "Початковий PA: >= 0,0\n" @@ -15158,6 +18589,9 @@ msgstr "" msgid "Temperature calibration" msgstr "Калібрування температури" +msgid "Filament type" +msgstr "Тип філаменту" + msgid "PLA" msgstr "PLA" @@ -15179,9 +18613,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "Тип філаменту" - msgid "Start temp: " msgstr "Початкова температура: " @@ -15191,16 +18622,15 @@ msgstr "Кінцева температура: " msgid "Temp step: " msgstr "Крок температури: " +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"Будь ласка, введіть правильні значення:\n" -"Початкова температура: <= 350\n" -"Кінцева температура: >= 170\n" -"Початкова температура > Кінцева температура + 5)" msgid "Max volumetric speed test" msgstr "Тест максимальної об'ємної швидкості" @@ -15211,14 +18641,14 @@ msgstr "Початкова об'ємна швидкість: " msgid "End volumetric speed: " msgstr "Кінцева об'ємна швидкість: " -msgid "step: " -msgstr "крок: " +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Будь ласка, введіть дійсні значення:\n" "старт > 0 \n" @@ -15226,7 +18656,7 @@ msgstr "" "кінець > початок + крок)" msgid "VFA test" -msgstr "VFA тест" +msgstr "ВДА (VFA) тест" msgid "Start speed: " msgstr "Початкова швидкість: " @@ -15234,11 +18664,14 @@ msgstr "Початкова швидкість: " msgid "End speed: " msgstr "Кінцева швидкість: " +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "Будь ласка, введіть коректні значення:\n" "початок > 10\n" @@ -15251,10 +18684,131 @@ msgstr "Початкова довжина ретракту: " msgid "End retraction length: " msgstr "Кінцева довжина ретракту: " -msgid "mm/mm" -msgstr "мм/мм" +msgid "Wiki Guide: Retraction Calibration" +msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "Надіслання G-коду на хост друку" msgid "Upload to Printer Host with the following filename:" @@ -15303,23 +18857,41 @@ msgstr "Скасувати вибране" msgid "Show error message" msgstr "Показати повідомлення про помилку" -msgid "Enqueued" +msgid "Queued" msgstr "У черзі" msgid "Uploading" msgstr "Завантаження" -msgid "Cancelling" +msgid "Canceling" msgstr "Скасування" msgid "Error uploading to print host" msgstr "Помилка завантаження на хост друку" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Тип столу не відповідає файлу. Будь ласка, підтвердьте перед початком друку." + +msgid "Time-lapse" +msgstr "Таймлапс" + +msgid "Heated Bed Leveling" +msgstr "Вирівнювання Нагрівального Столу" + +msgid "Textured Build Plate (Side A)" +msgstr "Текстурована Робоча Пластина (Cторона A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Гладка Робоча Пластина (Cторона B)" + msgid "Unable to perform boolean operation on selected parts" msgstr "Не вдається виконати булеву операцію на вибраних частинах" msgid "Mesh Boolean" -msgstr "Булева операція меша" +msgstr "Булеві операції" msgid "Union" msgstr "Об'єднання" @@ -15337,10 +18909,10 @@ msgid "Tool Volume" msgstr "Об'єм інструмента" msgid "Subtract from" -msgstr "Відняти від" +msgstr "Ціль" msgid "Subtract with" -msgstr "Відняти з" +msgstr "Від'ємник" msgid "selected" msgstr "вибрані" @@ -15352,7 +18924,7 @@ msgid "Part 2" msgstr "Частина 2" msgid "Delete input" -msgstr "Видалити вхід" +msgstr "Видалити початкові об'єкти" msgid "Network Test" msgstr "Тест мережі" @@ -15375,14 +18947,14 @@ msgstr "Версія системи:" msgid "DNS Server:" msgstr "DNS-сервер:" -msgid "Test Snapmaker Orca(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" msgstr "Перевірте Snapmaker Orca на (GitHub)" -msgid "Test Snapmaker Orca(GitHub):" +msgid "Test Snapmaker Orca (GitHub):" msgstr "Перевірте Snapmaker Orca (GitHub):" -msgid "Test Bing.com" -msgstr "Tест Bing.com" +msgid "Test bing.com" +msgstr "Tест bing.com" msgid "Test bing.com:" msgstr "Tест bing.com:" @@ -15448,7 +19020,7 @@ msgstr "" "виробника." msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "" "“Bambu” або “Generic” не може бути використано як виробник для власних " "налаштувань філаменту." @@ -15456,7 +19028,7 @@ msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "Тип філаменту не вибраний. Будь ласка, перевиберіть тип." -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "" "Серійний номер філаменту не введено. Будь ласка, введіть серійний номер." @@ -15472,7 +19044,7 @@ msgstr "" "Усі введені значення в полі власного виробника або серійного номера є " "пробіли. Будь ласка, введіть щось інше." -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "Виробник не може бути числом. Будь ласка, введіть ще раз." msgid "" @@ -15483,11 +19055,11 @@ msgstr "" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" -"Назва філаменту %s, яку ви створили, вже існує. \n" +"Назва філаменту %s, яку ви створили, вже існує.\n" "Якщо ви продовжите створення, новий набір параметрів буде відображений з " "повною назвою. Хочете продовжити?" @@ -15503,8 +19075,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "Ми б перейменували попередні налаштування на «Вибраний вами серійний " "@принтер постачальника».\n" @@ -15515,7 +19087,7 @@ msgid "Create Printer/Nozzle" msgstr "Створити Принтер/Сопло" msgid "Create Printer" -msgstr "Принтер" +msgstr "Створити Принтер" msgid "Create Nozzle for Existing Printer" msgstr "Створити сопло для існуючого принтера" @@ -15532,21 +19104,27 @@ msgstr "Імпорт набору параметрів" msgid "Create Type" msgstr "Тип" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "Модель не знайдено. Будь ласка, перевиберіть виробника." -msgid "Select Model" -msgstr "Виберіть модель" - msgid "Select Printer" msgstr "Виберіть принтер" +msgid "Select Model" +msgstr "Виберіть модель" + msgid "Input Custom Model" msgstr "Введіть власну модель" msgid "Can't find my printer model" msgstr "Не можу знайти свою модель принтера" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "Прямокутник" @@ -15556,15 +19134,9 @@ msgstr "Простір для друку" msgid "Hot Bed STL" msgstr "STL файл для гарячого столу" -msgid "Load stl" -msgstr "Завантажити STL" - msgid "Hot Bed SVG" msgstr "SVG для гарячого ліжка" -msgid "Load svg" -msgstr "Завантажити SVG" - msgid "Max Print Height" msgstr "Максимальна висота друку" @@ -15577,16 +19149,16 @@ msgstr "" "Виникла помилка під час визначення розміру файлу, будь ласка, імпортуйте " "знову." -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "Шлях до налаштувань не знайдено. Будь ласка, перевиберіть виробника." msgid "The printer model was not found, please reselect." msgstr "Модель принтера не було знайдено. Будь ласка, перевиберіть її." -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "Діаметр сопла не знайдено. Будь ласка, перевиберіть його." -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "Налаштування принтера не знайдено. Будь ласка, перевиберіть його." msgid "Printer Preset" @@ -15601,9 +19173,6 @@ msgstr "Скасувати вибір всіх" msgid "Process Preset Template" msgstr "Шаблон набору параметрів процесу" -msgid "Back Page 1" -msgstr "Повернутися на 1 сторінку" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -15618,9 +19187,6 @@ msgstr "" "Ви ввели недопустимий ввід у розділі “Друкована область” на першій сторінці. " "Будь ласка, перевірте перед створенням." -msgid "The custom printer or model is not inputed, place input." -msgstr "Власна модель або принтер не введені. Будь ласка, введіть дані." - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -15650,14 +19216,14 @@ msgstr "Створення налаштувань філаменту не вда msgid "Create process presets failed. As follows:\n" msgstr "Створення налаштувань процесу не вдалося. Ось докладніше:\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "Виробника не знайдено, будь ласка, перевиберіть." msgid "Current vendor has no models, please reselect." msgstr "Поточний виробник не має моделей, будь ласка, перевиберіть." msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "" "Ви не вибрали виробника та модель або не ввели власного виробника та модель." @@ -15685,10 +19251,18 @@ msgstr "" "Ви ще не вибрали принтер, для якого потрібно замінити сопло. Будь ласка, " "оберіть." -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "Створення принтера успішно завершено" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "Створення філаменту успішно завершено" msgid "Printer Created" @@ -15709,7 +19283,7 @@ msgid "" "them carefully." msgstr "" "Будь ласка, перейдіть до налаштувань філаменту, щоб відредагувати свої " -"налаштування, якщо потрібно. \n" +"налаштування, якщо потрібно.\n" "Зверніть увагу, що температура насадки, температура гарячого ліжка і " "максимальна об’ємна швидкість мають значний вплив на якість друку. Будь " "ласка, встановіть їх обережно." @@ -15719,7 +19293,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" @@ -15778,15 +19352,22 @@ msgstr "" "Якщо ні, буде додано суфікс з часом, і ви зможете змінити ім’я після " "створення." +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Принтер і всі нитки та налаштування процесу, які належать принтеру.\n" "Ними можна ділитись з іншими." msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "Налаштування філаменту користувача \n" @@ -15855,7 +19436,7 @@ msgstr "" "Примітка: Якщо єдиний пресет під цим філаментом буде видалений, то філамент " "також буде видалений після виходу з діалогового вікна." -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "" "Налаштування, що успадковуються іншими налаштуваннями, не можуть бути " "видалені" @@ -15865,29 +19446,36 @@ msgid_plural "The following preset inherits this preset." msgstr[0] "Профіль вказаний нижче, успадковується від поточного профілю." msgstr[1] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[2] "Профілі вказані нижче, успадковуються від поточного профілю." +msgstr[3] "" msgid "Delete Preset" msgstr "Видалити пресет" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Ви впевнені, що хочете видалити вибраний пресет?\n" +"Якщо пресет відповідає філаменту, який в даний момент використовується на " +"вашому принтері, будь ласка, скиньте інформацію про філамент для цього слоту." + msgid "Are you sure to delete the selected preset?" msgstr "Ви впевнені, що хочете видалити вибраний пресет?" msgid "Delete preset" -msgstr "Видалити пресет" +msgstr "Видалити профіль" msgid "+ Add Preset" msgstr "+ Додати пресет" -msgid "Delete Filament" -msgstr "Видалити Філамент" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" "Всі набори параметрів філаменту, що належать до цього філаменту, будуть " -"видалені. \n" +"видалені.\n" "Якщо ви використовуєте цей філамент на своєму принтері, будь ласка, скиньте " "інформацію про філамент для цього слоту." @@ -15924,21 +19512,34 @@ msgid "Daily Tips" msgstr "Щоденні поради" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "запам’ятоване сопло: %.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +msgid "nozzle size in preset: %d" msgstr "" -"Діаметр вашого сопла в налаштуваннях не відповідає збереженому діаметру " -"сопла. Чи змінювали ви своє сопло останнім часом?" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" -"*Друк матеріалу %s з використанням сопла %s може призвести до пошкодження " -"сопла" msgid "Need select printer" msgstr "Потрібно вибрати принтер" @@ -15946,6 +19547,35 @@ msgstr "Потрібно вибрати принтер" msgid "The start, end or step is not valid value." msgstr "Початок, кінець або крок не є дійсним значенням." +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -15968,9 +19598,6 @@ msgstr "Успіх!" msgid "Are you sure to log out?" msgstr "Ви впевнені, що вийшли?" -msgid "Refresh Printers" -msgstr "Оновити принтери" - msgid "View print host webui in Device tab" msgstr "Переглянути веб-інтерфейс друку у вкладці Пристрій" @@ -16015,22 +19642,22 @@ msgstr "Не вдалося підключитися до принтерів, п msgid "Mismatched type of print host: %s" msgstr "Невідповідність типу принт-сервера: %s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "З’єднання з AstroBox працює коректно." msgid "Could not connect to AstroBox" msgstr "Не вдалося з’єднатися з AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Примітка: Для AstroBox потрібна версія щонайменше 1.1.0." -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "З’єднання з Duet працює коректно." msgid "Could not connect to Duet" msgstr "Не вдалося з’єднатися з Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "Сталася невідома помилка" msgid "Wrong password" @@ -16042,7 +19669,7 @@ msgstr "Не вдалося отримати ресурси для створе msgid "Upload not enabled on FlashAir card." msgstr "Завантаження не активовано на картці FlashAir." -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "З’єднання з FlashAir працює коректно, і завантаження активовано." msgid "Could not connect to FlashAir" @@ -16055,28 +19682,28 @@ msgstr "" "Примітка: Для FlashAir потрібна прошивка версії 2.00.02 або новіша з " "активованою функцією завантаження." -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "З’єднання з MKS працює коректно." msgid "Could not connect to MKS" msgstr "Не вдалося підключитися до MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "Підключення до OctoPrint працює правильно." msgid "Could not connect to OctoPrint" msgstr "Не вдалося підключитися до OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Примітка. Потрібна версія OctoPrint не нижче 1.1.0." -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Підключення до Prusa SL1 / SL1S працює правильно." msgid "Could not connect to Prusa SLA" msgstr "Не вдалося підключитися до Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "Підключення до PrusaLink працює коректно." msgid "Could not connect to PrusaLink" @@ -16102,19 +19729,19 @@ msgstr "" "Відбулася помилка завантаження. За адресою %1% не знайдено відповідного " "сховища." -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "Підключення до Prusa Connect працює коректно." msgid "Could not connect to Prusa Connect" msgstr "Не вдалося підключитися до Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "Підключення до Repetier працює правильно." msgid "Could not connect to Repetier" msgstr "Не вдалося підключитися до Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Примітка: потрібна версія Repetier принаймні 0.90.0." #, boost-format @@ -16146,8 +19773,8 @@ msgstr "" "Помилка: “%2%”" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "Він має малу висоту шару, що призводить до майже непомітних ліній " "шаруватості та високої якості друку. Він підходить для більшості загальних " @@ -16155,8 +19782,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "Порівняно з типовим профілем для насадки 0,2 мм, він має менші швидкості і " "прискорення, а також розріджену структуру наповнення у вигляді гіроїда. " @@ -16165,8 +19792,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" "Порівняно з типовим профілем для насадки 0,2 мм, він має трохи більшу висоту " "шару, що призводить до майже непомітних ліній шаруватості та трохи коротший " @@ -16174,8 +19801,7 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" "Порівняно з типовим профілем для насадки 0,2 мм, він має більшу висоту шару, " "що призводить до слабко видимих ліній шаруватості, але при цьому друкується " @@ -16183,18 +19809,15 @@ msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"Порівняно з типовим профілем для насадки 0,2 мм, це має меншу висоту шару, і " -"результатом є майже невидимі лінії шару та вища якість друку, але коротший " -"час друку." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Порівняно з типовим профілем для насадки 0,2 мм, цей профіль має меншу " "кількість ліній шарування, менші швидкості і прискорення, і розріджене " @@ -16203,19 +19826,16 @@ msgstr "" "довший час друку." msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"Порівняно з типовим профілем для насадки діаметром 0,2 мм, цей профіль має " -"меншу висоту шару, що призводить до мінімальних ліній шарування та вищої " -"якості друку, але скорочує час друку." msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "Порівняно з типовим профілем для насадки 0,2 мм, цей профіль має меншу " "кількість ліній шарування, менші швидкості та прискорення, а також " @@ -16224,16 +19844,16 @@ msgstr "" "збільшує час друку." msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "Він має загальну висоту шару та призводить до загальних ліній шарування і " "якості друку. Він підходить для більшості загальних випадків друку." msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "більше кількість обводок стін та вищу щільність розрідженого наповнювача. " @@ -16242,8 +19862,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "більшу висоту шару, що призводить до більш помітних ліній шарування та " @@ -16251,8 +19871,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "більшу висоту шару, що призводить до більш помітних ліній шарування та " @@ -16260,8 +19880,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "меншу висоту шару, що призводить до менш помітних ліній шарування та вищої " @@ -16270,8 +19890,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "меншу висоту шару, менші швидкості і прискорення, а також розріджений " @@ -16281,8 +19901,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "меншу висоту шару, що призводить до майже непомітних ліній шарування та " @@ -16291,8 +19911,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "меншу висоту шару, менші швидкості та прискорення, а також розріджений " @@ -16301,24 +19921,23 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має " "меншу висоту шару, що призводить до майже непомітних ліній шарування, але " "також збільшує час друку." msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "Він має велику висоту шару, що призводить до видимих ліній шарування і " "звичайної якості друку та часу друку." msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "Порівняно з типовим профілем з 0,6 мм сопла, він має більше стінних петель і " "вищу щільність розрідженого наповнювача. Таким чином, він забезпечує більшу " @@ -16326,8 +19945,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "Порівняно з типовим профілем з 0,6 мм сопла, він має більшу висоту шару, що " "призводить до більш помітних ліній шару та нижчої якості друку, але " @@ -16335,8 +19954,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "Порівняно з типовим профілем з 0,6 мм сопла, він має більшу висоту шару, що " "призводить до набагато більш помітних ліній шару та значно нижчої якості " @@ -16344,8 +19963,8 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "Порівняно з типовим профілем з 0,6 мм сопла, він має меншу висоту шару, що " "призводить до менш помітних ліній шару і трохи вищої якості друку, але " @@ -16353,44 +19972,34 @@ msgstr "" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "Порівняно з типовим профілем з 0,6 мм сопла, він має меншу висоту шару, що " "призводить до менш помітних ліній шару та вищої якості друку, але більш " "тривалого часу друку." msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"Він має дуже велику висоту шару, що призводить до дуже помітних ліній шару, " -"низької якості друку і загального часу друку." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має більшу висоту " -"шару, що призводить до дуже помітних ліній шару і значно нижчої якості " -"друку, але коротшого часу друку у деяких випадках друку." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має набагато " -"більшу висоту шару, що призводить до надзвичайно помітних ліній шару і " -"значно нижчої якості друку, але набагато коротшого часу друку у деяких " -"випадках друку." msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має трохи меншу " "висоту шару, що призводить до трохи менше, але все ще помітних ліній шару і " @@ -16398,12 +20007,322 @@ msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Немає AMS" + +msgid "There is no device available to send printing." +msgstr "Немає пристрою для надсилання друку." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "" +"Кількість принтерів, що використовуються одночасно, не може дорівнювати 0." + +msgid "Use External Spool" +msgstr "Використовуйте зовнішню катушку" + +msgid "Select Printers" +msgstr "Вибрати принтери" + +msgid "Device Name" +msgstr "Назва пристрою" + +msgid "Device Status" +msgstr "Статус пристрою" + +msgid "AMS Status" +msgstr "Статус AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Будь ласка, виберіть тут пристрої, якими ви хочете керувати (до 6 пристроїв)" + +msgid "Printing Options" +msgstr "Параметри друку" + +msgid "Bed Leveling" +msgstr "Вирівнювання столу" + +msgid "Flow Dynamic Calibration" +msgstr "Динамічне калібрування потоку" + +msgid "Send Options" +msgstr "Параметри відправки" + +msgid "Send to" +msgstr "Відправити на" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"друкувати одночасно (це залежить від того, скільки пристроїв можуть " +"нагріватися одночасно)." + +msgid "Wait" +msgstr "Чекайте" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "" +"хвилин на кожну партію. (Це залежить від того, скільки часу потрібно на " +"нагрівання)." + +msgid "Task Sending" +msgstr "Відправка завдання" + +msgid "Task Sent" +msgstr "Завдання надіслане" + +msgid "Edit multiple printers" +msgstr "Редагувати кілька принтерів" + +msgid "Select connected printers (0/6)" +msgstr "Вибрати підключені принтери (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Вибрати підключені принтери (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Максимальна кількість принтерів, які можна вибрати, становить %d" + +msgid "No task" +msgstr "Немає завдань" + +msgid "Edit Printers" +msgstr "Редагування принтерів" + +msgid "Task Name" +msgstr "Назва завдання" + +msgid "Actions" +msgstr "Дії" + +msgid "Task Status" +msgstr "Статус завдання" + +msgid "Sent Time" +msgstr "Час відправлення" + +msgid "There are no tasks to be sent!" +msgstr "Немає завдань для відправлення!" + +msgid "No historical tasks!" +msgstr "Історії завдань немає!" + +msgid "Upgrading" +msgstr "Оновлення" + +msgid "syncing" +msgstr "синхронізація" + +msgid "Printing Finish" +msgstr "Друк завершено" + +msgid "Printing Failed" +msgstr "Помилка друку" + +msgid "Printing Pause" +msgstr "Друк на паузі" + +msgid "Pending" +msgstr "Очікує" + +msgid "Sending" +msgstr "Відправка" + +msgid "Sending Finish" +msgstr "Відправлення завершено" + +msgid "Sending Cancel" +msgstr "Скасовано відправку" + +msgid "Sending Failed" +msgstr "Відправлення не вдалося" + +msgid "Print Success" +msgstr "Успішний друк" + +msgid "Print Failed" +msgstr "Не вдалося надрукувати" + +msgid "Removed" +msgstr "Видалено" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має меншу висоту " -"шару, що призводить до менше, але все ще помітних ліній шару і трохи вищої " -"якості друку, але довшого часу друку у деяких випадках друку." msgid "Connected to Obico successfully!" msgstr "Підключення до Obico успішно!" @@ -16428,11 +20347,11 @@ msgstr "" "Обліковий запис SimplyPrint не пов’язано. Щоб налаштувати його, перейдіть до " "параметрів підключення." -msgid "Connection to Flashforge works correctly." -msgstr "Підключення до Flashforge працює правильно." +msgid "Serial connection to Flashforge is working correctly." +msgstr "" -msgid "Could not connect to Flashforge" -msgstr "Не вдалося підключитися до Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "" msgid "The provided state is not correct." msgstr "Наданий стан невірний." @@ -16443,9 +20362,114 @@ msgstr "Надайте необхідні дозволи під час авто msgid "Something unexpected happened when trying to log in, please try again." msgstr "Під час спроби входу трапилося щось несподіване. Повторіть спробу." -msgid "User cancelled." +msgid "User canceled." msgstr "Користувача скасовано." +msgid "Head diameter" +msgstr "Діаметр голови" + +msgid "Max angle" +msgstr "Максимальний кут" + +msgid "Detection radius" +msgstr "Радіус виявлення" + +msgid "Remove selected points" +msgstr "Видалити вибрані точки" + +msgid "Remove all" +msgstr "Видалити все" + +msgid "Auto-generate points" +msgstr "Автоматично згенерувати точки" + +msgid "Add a brim ear" +msgstr "Додати краєчок" + +msgid "Delete a brim ear" +msgstr "Видалити краєчок" + +msgid "Adjust head diameter" +msgstr "" + +msgid "Adjust section view" +msgstr "Налаштувати вид секції" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Попередження: Тип краєчка не встановлено на “пофарбований”, краєчки не " +"матимуть ефекту!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " Неправильні краєчки" + +msgid "Brim Ears" +msgstr "Краєчки" + +msgid "Please select single object." +msgstr "Будь ласка, виберіть один об’єкт." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" @@ -16466,7 +20490,7 @@ msgstr "" "Сендвіч режим\n" "Чи знаєте ви, що можна використовувати сендвіч-режим (внутрішній-зовнішній-" "внутрішній), щоб покращити точність і узгодженість шарів, якщо ваша модель " -"не має дуже крутих звисів?" +"не має дуже крутих нависань?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" @@ -16525,11 +20549,11 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "Як використовувати комбінації клавіш\n" "Чи знаєте ви, що Snapmaker Orca пропонує широкий спектр комбінацій клавіш для " -"роботи з 3D-сценами." +"роботи з 3D-сценами?" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -16539,7 +20563,7 @@ msgid "" msgstr "" "Reverse on odd\n" "Чи знали ви, що функція Реверс по непарних периметрах може значно " -"покращити якість поверхні ваших звисів?" +"покращити якість поверхні ваших нависань?" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -16572,16 +20596,16 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" -"Авторозбудова\n" -"Чи знаєте ви, що можна автоматично впорядкувати всі об'єкти в проекті?" +"Автоматичне впорядкування\n" +"Чи знаєте ви, що можна автоматично розташувати всі об'єкти в проєкті?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "Автоорієнтація\n" "Чи знаєте ви, що можна повертати об'єкти в оптимальну орієнтацію для друку " @@ -16761,18 +20785,18 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "Кайма для кращого прилипання\n" -"Чи знаєте ви, що коли моделі друку мають невелику площу контакту з поверхнею " -"друку, рекомендується використовувати кайму?" +"Чи знаєте ви, що при друці моделей які мають невелику площу контакту з " +"поверхнею друку, рекомендується використовувати кайму?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "Встановлення параметрів для кількох об'єктів\n" "Чи знаєте ви, що можна встановити параметри нарізки для всіх " @@ -16789,12 +20813,12 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" -"Урівень з опорою/об'єктами/заповненням\n" -"Чи знаєте ви, що ви можете зберегти втрачені нитки, промиваючи їх в опору/" -"об'єкти/заповнення під час зміни нитки?" +"Промивати в підтримки/об'єкти/заповнення\n" +"Чи знаєте ви, що ви можете зберегти витрачений філамент, промиваючи його в " +"підтримки/об'єкти/заповнення під час зміни філаменту?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" @@ -16806,13 +20830,14 @@ msgstr "" "Чи знаєте ви, що для підвищення міцності моделі можна використовувати " "більшепериметрів та вищу щільність заповнення?" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" "Коли потрібно друкувати з відкритими дверцятами принтера\n" "Чи знаєте ви, що відкриття дверцят принтера може знизити ймовірність " @@ -16825,336 +20850,602 @@ msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "Уникнення деформації\n" "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як " "ABS, відповідне підвищення температури гарячого ліжка може зменшити " -"ймовірність деформації." +"ймовірність деформації?" -#~ msgid "Current association: " -#~ msgstr "Поточна асоціація: " - -#~ msgid "Associate prusaslicer://" -#~ msgstr "Асоціювати prusaslicer://" - -#~ msgid "Not associated to any application" -#~ msgstr "Не пов'язаний з жодним додатком" +#~ msgid "Adaptive layer height" +#~ msgstr "Адаптивна ширина шару" #~ msgid "" -#~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " -#~ "models from Printable.com" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." #~ msgstr "" -#~ "Асоціювати Snapmaker Orca з prusaslicer:// посиланнями щоб Orca могла " -#~ "відкривати моделі прямо з Printable.com" +#~ "Включення цієї опції означає, що висота шару підтримки дерева, за " +#~ "виключенням першого, буде розрахована автоматично " -#~ msgid "Associate bambustudio://" -#~ msgstr "Асоціювати bambustudio://" +#~ msgid "AMS not connected" +#~ msgstr "АМС не підключено" + +#~ msgid "Ext Spool" +#~ msgstr "Зовнішня котушка" + +#~ msgid "Guide" +#~ msgstr "Гід" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Калібрування АМС..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "" +#~ "Під час калібрування виникла проблема. Натисніть, щоб переглянути рішення." + +#~ msgid "Calibrate again" +#~ msgstr "Повторити калібрування" + +#~ msgid "Cancel calibration" +#~ msgstr "Скасувати калібрування" + +#~ msgid "Feed Filament" +#~ msgstr "Подача філаменту" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Перед друком через локальну мережу необхідно вставити картку SD." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Перед надсиланням на принтер необхідно вставити картку SD." #~ msgid "" -#~ "Associate Snapmaker Orca with bambustudio:// links so that Orca can open " -#~ "models from makerworld.com" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." #~ msgstr "" -#~ "Асоціювати Snapmaker Orca з bambustudio:// посиланнями щоб Orca могла " -#~ "відкривати моделі прямо з makerworld.com" - -#~ msgid "Associate cura://" -#~ msgstr "Асоціювати cura://" +#~ "Примітка. Можна вибрати лише слоти AMS, завантажені одним і тим же типом " +#~ "матеріалу." #~ msgid "" -#~ "Associate Snapmaker Orca with cura:// links so that Orca can open models from " -#~ "thingiverse.com" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" #~ msgstr "" -#~ "Асоціювати Snapmaker Orca з cura:// посиланнями щоб Orca могла відкривати " -#~ "моделі прямо з thingiverse.com" +#~ "Якщо в AMS є два ідентичні філаменти, резервне копіювання філаменту буде " +#~ "увімкнено.\n" +#~ "(Зараз підтримується автоматичне забезпечення споживних матеріалів " +#~ "однакового бренду, типу матеріалу і кольору)" #~ msgid "" -#~ "File size exceeds the 100MB upload limit. Please upload your file through " -#~ "the panel." +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." #~ msgstr "" -#~ "Розмір файлу перевищує ліміт завантаження в 100 Мб. Будь ласка, " -#~ "завантажте свій файл через панель." +#~ "AMS зчитує інформацію про витратний матеріал Bambu та розраховує його " +#~ "залишкову ємність на котушці. Залишкова ємність автоматично оновлюється в " +#~ "процесі друку." -#~ msgid "Please input a valid value (K in 0~0.3)" -#~ msgstr "Введіть допустиме значення (K в діапазоні 0~0.3)" +#, fuzzy +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Мінімально рекомендована температура менше 190 градусів або максимально " +#~ "рекомендована температура більше 300 градусів.\n" -#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" -#~ msgstr "Будь ласка, введіть допустиме значення (K від 0~0.3, N від 0.6~2.0)" +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Спіральний режим працює лише тоді, коли петлі на стіні дорівнюють 1, " +#~ "підтримку вимкнено, верхні шари оболонки дорівнюють 0, щільність " +#~ "заповнення дорівнює 0 і тип сповільненої зйомки традиційний." -#~ msgid "Select connected printetrs (0/6)" -#~ msgstr "Вибір підключених принтерів (0/6)" +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Перевірка XY-механіки" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Пуаза через датчик філаменту" + +#~ msgid "Heating hotend" +#~ msgstr "Нагрів хотенду" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Калібрування екструзії" + +#~ msgid "Printing was paused by the user" +#~ msgstr "Друк припинено користувачем" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Пауза під час падіння передньої кришки з голови" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Калібровка потоку екструзії" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Пауза при несправності температури сопла" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Пауза при несправності температури столу" + +#~ msgid "Skip step pause" +#~ msgstr "Пропустити команду паузи" + +#~ msgid "Motor noise calibration" +#~ msgstr "Калібрування шуму мотора" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Пауза через втрату сигналу AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Пауза через низьку швидкість вентилятора термобар'єру" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Пауза через помилку контролю температури камери" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Друк припинено G-кодом, вставленим користувачем" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Пауза при виявленні протікання матеріалу" + +#~ msgid "Cutter error pause" +#~ msgstr "Пауза при помилці обрізки нитки" + +#~ msgid "First layer error pause" +#~ msgstr "Пауза через помилку першого шару" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Пауза через засмічення сопла" + +#~ msgid "Fatal" +#~ msgstr "Критична помилка" + +#~ msgid "Serious" +#~ msgstr "Серйозний" + +#~ msgid "Common" +#~ msgstr "Загальний" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Поточна температура камери або цільова температура камери перевищує 45℃. " +#~ "Щоб уникнути забивання екструдера, не дозволяється завантажувати " +#~ "філаменти низької температури (PLA/PETG/TPU)." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Філамент низької температури (PLA/PETG/TPU) завантажено в екструдер. Щоб " +#~ "уникнути забивання екструдера, не дозволяється встановлювати температуру " +#~ "камери вище 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF не підтримується AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по " +#~ "висоті.\n" +#~ "Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " +#~ "неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Ви можете знайти його в \\Установки > Мережа > Код підключення\"\n" +#~ "на принтері, як показано на малюнку:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Перегляд файлів на SD-картці не підтримується в поточній версії прошивки. " +#~ "Будь ласка, оновіть прошивку принтера." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Будь ласка, перевірте, чи вставлена SD-карта в принтер.\n" +#~ "Якщо вона все ще не розпізнається, ви можете спробувати форматувати SD-" +#~ "карту." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "Перегляд файлів на SD-картці не підтримується в режимі лише LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Зберігання недоступне, вставте SD-карту." + +#~ msgid "Cham" +#~ msgstr "Камера" + +#~ msgid "Still unload" +#~ msgstr "Ще розвантажити" + +#~ msgid "Still load" +#~ msgstr "Ще завантажити" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Не можу запустити це без SD-карти." + +#~ msgid "Update" +#~ msgstr "Оновлення" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Чутливість паузи" #, c-format, boost-format -#~ msgid "Select Connected Printetrs (%d/6)" -#~ msgstr "Виберіть Підключені принтери (%d/6)" - -#~ msgid "PrintingPause" -#~ msgstr "Пауза друку" - -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "" -#~ "Не вдалося встановити локальне підключення до принтера; спробуйте ще раз." +#~ msgid "%.1f" +#~ msgstr "%.1f" #~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." #~ msgstr "" -#~ "Будь ласка, знайдіть докладну інформацію щодо калібрування “Flow Dynamics " -#~ "Calibration” у нашому вікі.\n" -#~ "\n" -#~ "Зазвичай калібрування не є необхідним. Коли ви розпочинаєте друк з одним " -#~ "кольором/матеріалом, з опцією “калібрування динаміки потоку” включеною у " -#~ "меню початку друку, принтер буде використовувати старий спосіб " -#~ "калібрування філаменту перед початком друку; Коли ви розпочинаєте друк з " -#~ "декількома кольорами/матеріалами, принтер використовуватиме стандартні " -#~ "параметри компенсації для філаменту під час кожного перемикання " -#~ "філаменту, що в більшості випадків дає гарний результат.\n" -#~ "\n" -#~ "Зверніть увагу, що є деякі випадки, коли результат калібрування може бути " -#~ "ненадійним: використання текстурної підкладки для калібрування; слабка " -#~ "адгезія підкладки (будь ласка, вимийте підкладку або нанесіть клей!) … " -#~ "Більше інформації можна знайти у нашому вікі.\n" -#~ "\n" -#~ "Результати калібрування мають приблизно 10-відсотковий шум у наших " -#~ "тестах, що може призвести до незначних відмінностей у кожному " -#~ "калібруванні. Ми все ще вивчаємо кореневу причину, щоб внести поліпшення " -#~ "в майбутніх оновленнях." +#~ "Немає ниток AMS. Виберіть принтер на сторінці «Пристрій», щоб завантажити " +#~ "інформацію AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Синхронізація ниток з AMS видаляє всі поточні вибрані пресети ниток і\n" +#~ "Кольори. Ви хочете продовжувати?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Синхронізацію вже робив, синхронізувати лише зміни абопересинхронізувати\n" +#~ "Усе?" + +#~ msgid "Sync" +#~ msgstr "Синхронізувати" + +#~ msgid "Resync" +#~ msgstr "Повторна синхронізація" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Є кілька невідомих ниток, зіставлених із загальною передустановкою.Будь " +#~ "ласка, оновіть Snapmaker Orca або перезапустіть Snapmaker Orca, щоб перевірити, " +#~ "чи є оновлення для системи пресети." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Ви впевнені, що хочете зберегти оригінальні SVG-файли з їхніми локальними " +#~ "шляхами у 3MF-файл?\n" +#~ "Якщо ви натиснете \"НІ\", всі SVG-файли у проекті будуть недоступні для " +#~ "редагування." + +#~ msgid "Private protection" +#~ msgstr "Приватний захист" + +#~ msgid "General Settings" +#~ msgstr "Загальні налаштування" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Показувати повідомлення \"Порада дня\" після запуску" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Якщо увімкнено, під час запуску відображаються корисні підказки." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "" +#~ "Об'єми промивки: автоматично перераховувати кожного разу при зміні " +#~ "кольору." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "" +#~ "Якщо увімкнено, авто-розраховувння кожного разу, коли змінюється колір." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "" +#~ "Об’єми промивки: автоматично перераховувати кожного разу при зміні " +#~ "філаменту." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "" +#~ "Якщо ввімкнено, автоматично обчислювати кожного разу, коли змінюється " +#~ "філамент" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Автоматично впорядкувати об'єкти пластини після копіювання об'єкту" + +#~ msgid "Network" +#~ msgstr "Мережа" + +#~ msgid "User Sync" +#~ msgstr "Синхронізація користувачів" + +#~ msgid "System Sync" +#~ msgstr "Синхронізація системи" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Асоціювати URL-адреси з Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "кожен" + +#~ msgid "Downloads" +#~ msgstr "Завантаження" + +#~ msgid "Dark Mode" +#~ msgstr "Темний режим" + +#~ msgid "Home page and daily tips" +#~ msgstr "Головна сторінка та щоденні поради" + +#~ msgid "Show home page on startup" +#~ msgstr "Показувати домашню сторінку під час запуску" + +#~ msgid "Please choose the filament color" +#~ msgstr "Будь ласка, виберіть колір філаменту" + +#~ msgid "Send print job to" +#~ msgstr "Надіслати завдання на друк на" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Філамент %s перевищує кількість слотів AMS. Будь ласка, оновіть прошивку " +#~ "принтер для підтримки призначення слотів AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Філамент перевищує кількість слотів AMS. Будь ласка, оновіть " +#~ "прошивкупринтера\n" +#~ "для підтримки призначення слотів AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Встановили зіставлення ниток зі слотами AMS. Ви можете натиснути\n" +#~ "Філамент вище, щоб змінити її слот зіставлення AMS" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Клацніть кожен філамент вище, щоб вказати його слот зіставлення AMS,Перш " +#~ "ніж відправити завдання на друк" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "Прошивка принтера підтримує лише послідовне зіставлення філаменту => AMS " +#~ "слот." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Перед початком друку необхідно вставити картку SD." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "SD-карта повинна бути вставлена для запису таймлапсу." + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "запам’ятоване сопло: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Ваш діаметр сопла в розрізаному файлі не відповідає запам’ятаному " +#~ "діаметру сопла. Якщо ви недавно змінили сопло, будь ласка, перейдіть до " +#~ "“Пристрій > Частини принтера”, щоб змінити налаштування." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Друк високотемпературного матеріалу (%s матеріал) з %s може призвести до " +#~ "пошкодження сопла" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "" +#~ "З’єднання з принтером. Під час процесу підключення скасувати неможливо." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Використовуйте обережно! Калібрування потоку на пластині Текстурованій " +#~ "PEI Пластині може бути невдалим через розсіяну поверхню." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Автоматична калібрування потоку за допомогою мікро лідару" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Надіслати на SD-карту принтера" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "" +#~ "Перед надсиланням на картку SD принтера необхідно вставити картку SD." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Принтер не підтримує надсилання на картку SD принтера." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Кількість кольорів повинна бути в діапазоні [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Поточні кольори філаменту:" + +#~ msgid "Quick set:" +#~ msgstr "Швидке встановлення:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Додати споживчий екструдер після існуючих екструдерів." + +#~ msgid "Cluster colors" +#~ msgstr "Згрупувати кольори" + +#~ msgid "Map Filament" +#~ msgstr "Відображення філаменту" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Примітка: Колір вже вибрано. Ви можете вибрати ОК \n" +#~ "щоб продовжити або вручну відкоригувати його." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Попередження: Кількість новостворених та \n" +#~ "поточних екструдерів перевищує 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Автокалькулятор" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca буде перераховувати об'єми промивки філаменту кожного разу, коли " +#~ "змінюється колір філаменту. Ви можете вимкнути автоматичний розрахунок у " +#~ "меню Snapmaker Orca > Параметри" + +#~ msgid "unloaded" +#~ msgstr "вивантажено" + +#~ msgid "loaded" +#~ msgstr "завантажено" + +#~ msgid "Filament #" +#~ msgstr "Філамент #" + +#~ msgid "From" +#~ msgstr "Від" + +#~ msgid "To" +#~ msgstr "В" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Відновлення друку (прийнятно дефекти)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Відновлення друку (проблема вирішена)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Крок 1. Будь-ласка переконайтесь що Snapmaker Orca та принтер знаходяться в " +#~ "одній в мережі." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Крок 2. Якщо IP та Код доступу нижче відрізняються від значень на " +#~ "принтері, будь-ласка відкоригуйте їх." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Крок 3. Будь-ласка знайдіть Серійний Номер (SN) принтера; зазвичай його " +#~ "модна знайти в інформації на екрані принтера." + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " занадто близько до інших, під час друку можливі зіткнення." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Не можна друкувати кілька ниток, які мають значну різницю в температурі " +#~ "разом. В іншому випадку екструдер та сопло можуть бути заблоковані або " +#~ "пошкоджені під час друку" + +#~ msgid "Ironing angle" +#~ msgstr "Кут прасування" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Прасування виконується під кутом. Від'ємне число вимикає цю функцію і " +#~ "використовує метод за замовчуванням." + +#~ msgid "Remove small overhangs" +#~ msgstr "Видалити невеликі виступи" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Видалити невеликі виступи, які, можливо, не потребують підтримки." #~ msgid "" #~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" +#~ "you want to overwrite the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," -#~ "що хочете перезаписати інші результати?" +#~ "Тільки один із результатів з однаковою назвою буде збережено. Ви " +#~ "впевнені, що хочете перезаписати інші результати?" + +#~ msgid "External Spool" +#~ msgstr "Зовнішній барабан" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Будь ласка, введіть правильні значення:\n" +#~ "Початкова температура: <= 350\n" +#~ "Кінцева температура: >= 170\n" +#~ "Початкова температура > Кінцева температура + 5)" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "Власна модель або принтер не введені. Будь ласка, введіть дані." #, c-format, boost-format -#~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" -#~ msgstr "" -#~ "Вже існує історичний результат калібрування з такою самою назвою: %s. " -#~ "Зберігається лише один результат з такою самою назвою. Ви впевнені, що " -#~ "хочете замінити історичний результат?" - -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "Будь ласка, знайдіть кут із ідеальним ступенем екструзії" +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "сопло в налаштуваннях: %s %s" #~ msgid "" -#~ "Associate Snapmaker Orca with prusaslicer:// links so that Orca can open " -#~ "PrusaSlicer links from Printable.com" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" #~ msgstr "" -#~ "Зв'язати Snapmaker Orca з посиланнями prusaslicer://, щоб Orca могла " -#~ "відкривати посилання PrusaSlicer з Printable.com" - -#~ msgid "" -#~ "Order of wall/infill. When the tickbox is unchecked the walls are printed " -#~ "first, which works best in most cases.\n" -#~ "\n" -#~ "Printing walls first may help with extreme overhangs as the walls have " -#~ "the neighbouring infill to adhere to. However, the infill will slighly " -#~ "push out the printed walls where it is attached to them, resulting in a " -#~ "worse external surface finish. It can also cause the infill to shine " -#~ "through the external surfaces of the part." -#~ msgstr "" -#~ "Порядок стінка/заповнення. Якщо прапорець знято, першими друкуються " -#~ "стіни, що в більшості випадків працює найкраще.\n" -#~ "\n" -#~ "Друк стінок першими може допомогти у випадку екстремальних виступів, " -#~ "оскільки стінки мають сусіднє заповнення, до якого вони прилягають. Однак " -#~ "заповнення злегка виштовхує надруковані стінки там, де воно прикріплене " -#~ "до них, що призводить до погіршення зовнішньої обробки поверхні. Це також " -#~ "може призвести до того, що заповнення просвічуватиметься крізь зовнішні " -#~ "поверхні деталі." - -#~ msgid "X" -#~ msgstr "X" - -#~ msgid "Y" -#~ msgstr "Y" - -#~ msgid "V" -#~ msgstr "V" - -#~ msgid "" -#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " -#~ "Ranellucci and the RepRap community" -#~ msgstr "" -#~ "Snapmaker Orca заснований на BambuStudio від Bambulab, який належить " -#~ "PrusaSlicer.\n" -#~ "Prusa Research. PrusaSlicer від Slic3r Алессандро Ранеллуччі і\n" -#~ "спільнота RepRap" - -#~ msgid "Export &Configs" -#~ msgstr "Експорт &конфігурації" - -#~ msgid "Infill direction" -#~ msgstr "Напрям заповнення" - -#~ msgid "" -#~ "Enable this to get a G-code file which has G2 and G3 moves. And the " -#~ "fitting tolerance is same with resolution" -#~ msgstr "" -#~ "Увімкніть цей параметр, щоб отримати файл G-коду з переміщеннями G2 та " -#~ "G3. А допуск припасування однаковим дозволом" - -#~ msgid "" -#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " -#~ "The percentage value is relative to line width of sparse infill" -#~ msgstr "" -#~ "Область заповнення трохи збільшена для перекриття периметром для " -#~ "кращогоскріплення. Відсоткове значення щодо ширини лінії заповнення" - -#~ msgid "Unload Filament" -#~ msgstr "Вивантажте філамент" - -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "" -#~ "Виберіть слот AMS, потім натисніть кнопку \\Load\\ або \\Unload\\, щоб " -#~ "автоматично\n" -#~ "завантажити або вивантажити філамент." - -#~ msgid "MC" -#~ msgstr "MC" - -#~ msgid "MainBoard" -#~ msgstr "Основна плата" - -#~ msgid "TH" -#~ msgstr "TH" - -#~ msgid "XCam" -#~ msgstr "XCam" - -#~ msgid "HMS" -#~ msgstr "HMS" - -#~ msgid "active" -#~ msgstr "активно" - -#~ msgid "Jump to layer" -#~ msgstr "Перейти до шару" - -#~ msgid "Cabin humidity" -#~ msgstr "Вологість салону" - -#~ msgid "" -#~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" -#~ msgstr "" -#~ "Зелений означає, що вологість AMS нормальна, помаранчевий означає, " -#~ "щоВологість висока,\n" -#~ "червоний означає, що вологість занадто висока. (Гігрометр: чим нижче, тим " -#~ "краще.)" - -#~ msgid "Desiccant status" -#~ msgstr "Статус вологопоглинача" - -#~ msgid "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" -#~ msgstr "" -#~ "Стан влагопоглинача нижче двох поділів свідчить про те, що вологопоглинач " -#~ "може бути\n" -#~ "неактивний. Будь ласка, замініть осушувач. (Смуги: чим вище, тим краще.)" - -#~ msgid "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." -#~ msgstr "" -#~ "Примітка. Коли кришку відкрито або замінено пакет з вологопоглиначем, це " -#~ "може зайняти деякий час.\n" -#~ "годин або ночі, щоб увібрати вологу. Низькі температури також " -#~ "уповільнюють\n" -#~ "процес. У цей час індикатор може не відображати патронник.\n" -#~ "точно." - -#~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing is completed." -#~ msgstr "" -#~ "Примітка: якщо під час друку буде вставлено новий філамент, AMS не буде " -#~ "автоматично читати будь-яку інформацію до завершення друку." - -#, boost-format -#~ msgid "Succeed to export G-code to %1%" -#~ msgstr "Успішно експортувати G-код у %1%" - -#~ msgid "Initialize failed (No Device)!" -#~ msgstr "Помилка ініціалізації (немає пристрою)!" - -#~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "Помилка ініціалізації (немає камери)!" - -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." -#~ msgstr "" -#~ "Принтер зайнятий завантаженням. Дочекайтеся завершення завантаження." - -#~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "Ініціалізація не вдалася (недоступна лише в режимі LAN)!" - -#~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "" -#~ "Помилка ініціалізації (відсутня IP-адреса принтера в локальній мережі)!" +#~ "Діаметр вашого сопла в налаштуваннях не відповідає збереженому діаметру " +#~ "сопла. Чи змінювали ви своє сопло останнім часом?" #, c-format, boost-format -#~ msgid "Stopped [%d]!" -#~ msgstr "Зупинено [%d]!" - -#, c-format, boost-format -#~ msgid "Load failed [%d]!" -#~ msgstr "Завантаження не вдалося [%d]!" - -#, boost-format -#~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" +#~ msgid "*Printing %s material with %s may cause nozzle damage" #~ msgstr "" -#~ "Ви змінили деякі налаштування попередньої установки \"%1%\". \n" -#~ "Зберегти ці змінені налаштування (нове значення) після перемикання Набір " -#~ "параметрів?" - -#~ msgid "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "" -#~ "Ви змінили деякі налаштування передустановки. \n" -#~ "Зберегти ці змінені налаштування (нове значення) після перемикання Набір " -#~ "параметрів?" - -#~ msgid "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)" -#~ msgstr "" -#~ "Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії " -#~ "товщини вертикальної оболонки (верхній + нижній шари твердого тіла)" - -#~ msgid "Configuration package updated to " -#~ msgstr "Пакет конфігурації оновлено до " +#~ "*Друк матеріалу %s з використанням сопла %s може призвести до пошкодження " +#~ "сопла" #~ msgid "" #~ "Improve shell precision by adjusting outer wall spacing. This also " @@ -17163,533 +21454,398 @@ msgstr "" #~ "Підвищення точності оболонки за рахунок регулювання відстані між " #~ "зовнішнімипериметрами. Це також покращує узгодженість шарів." -#~ msgid "The Config can not be loaded." -#~ msgstr "Конфіг не завантажується." +#~ msgid "Enable filament ramming." +#~ msgstr "Увімкнути накат нитки" -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "" -#~ "3mf генерується старим слайсером Orca, завантажувати лише дані геометрії." +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + коліщатко миші" -#~ msgid "" -#~ "Relative extrusion is recommended when using \"label_objects\" option." -#~ "Some extruders work better with this option unckecked (absolute extrusion " -#~ "mode). Wipe tower is only compatible with relative mode. It is always " -#~ "enabled on BambuLab printers. Default is checked" -#~ msgstr "" -#~ "При використанні опції «label_objects» рекомендується відносне " -#~ "Видавлювання. Деякі екструдери працюють краще з цією опцією без " -#~ "перевірки(абсолютний режим екструзії). Обтиральна вежа сумісна лише з " -#~ "відносним режимом. Вона завжди включена на принтерах BambuLab. за " -#~ "замовчуванням встановлено прапорець" +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + коліщатко миші" -#~ msgid "Movement:" -#~ msgstr "Рух:" +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + Ліва кнопка миші" -#~ msgid "Movement" -#~ msgstr "Рух" +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" -#~ msgid "Auto Segment" -#~ msgstr "Автосегмент" +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + переміщення миші вгору або вниз" -#~ msgid "Depth ratio" -#~ msgstr "Коефіцієнт глибини" +#~ msgid "Left mouse button:" +#~ msgstr "Ліва кнопка миші:" -#~ msgid "Prizm" -#~ msgstr "Призма" +#~ msgid "Right mouse button:" +#~ msgstr "Права кнопка миші:" -#~ msgid "connector is out of cut contour" -#~ msgstr "роз'єм виходить за контур вирізу" +#~ msgid "Shift + Left mouse button:" +#~ msgstr "SHIFT + Ліва кнопка миші:" -#~ msgid "connectors are out of cut contour" -#~ msgstr "роз'єми виходять за контур вирізу" +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + права кнопка миші:" -#~ msgid "connector is out of object" -#~ msgstr "роз'єм поза об'єктом" +#~ msgid "Recent projects" +#~ msgstr "Недавні проєкти" -#~ msgid "connectors is out of object" -#~ msgstr "з’єднання відсутні в об'єкті" +#~ msgid "Maximum recent projects" +#~ msgstr "Максимум останніх проектів" -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "Неприпустимий стан. Жодна деталь не вибрана для збереження після вирізання" +#~ msgid "Maximum count of recent projects" +#~ msgstr "Максимальна кількість останніх проектів" -#~ msgid "Edit Text" -#~ msgstr "Редагувати текст" +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+будь-яка стрілка" -#~ msgid "Error! Unable to create thread!" -#~ msgstr "Помилка! Неможливо створити тему!" +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+Ліва кнопка миші" -#~ msgid "Exception" -#~ msgstr "Виняток" +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+Ліва кнопка миші" -#~ msgid "Choose SLA archive:" -#~ msgstr "Виберіть архів SLA:" +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+будь-яка стрілка" -#~ msgid "Import file" -#~ msgstr "Імпортувати файл" +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+Ліва кнопка миші" -#~ msgid "Import model and profile" -#~ msgstr "Імпорт моделі та профілю" +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+Ліва кнопка миші" -#~ msgid "Import profile only" -#~ msgstr "Імпортувати лише профіль" +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+Ліва кнопка миші" -#~ msgid "Import model only" -#~ msgstr "Тільки модель імпорту" +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+будь-яка стрілка" -#~ msgid "Accurate" -#~ msgstr "Точний" +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+Колесо миші" -#~ msgid "Balanced" -#~ msgstr "Збалансований" +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+Колесо миші" -#~ msgid "Quick" -#~ msgstr "Швидкий" +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+Колесо миші" -#~ msgid "" -#~ "Discribe how long the nozzle will move along the last path when retracting" -#~ msgstr "" -#~ "Визначте як далеко сопло рухатиметься вздовж останнього шляху при відкаті" +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+колесо миші" -#~ msgid "" -#~ "Simplify Model\n" -#~ "Did you know that you can reduce the number of triangles in a mesh using " -#~ "the Simplify mesh feature? Right-click the model and select Simplify " -#~ "model. Read more in the documentation." -#~ msgstr "" -#~ "Спрощення моделі\n" -#~ "Чи знаєте ви, що можна зменшити кількість трикутників у мережі за " -#~ "допомогою Елемент Спростити мережу (Simplify mesh)? Клацніть модель " -#~ "правою кнопкою миші і виберіть «Спростити модель». Додаткову інформацію " -#~ "наведено в документації." +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+колесо миші" -#~ msgid "" -#~ "Subtract a Part\n" -#~ "Did you know that you can subtract one mesh from another using the " -#~ "Negative part modifier? That way you can, for example, create easily " -#~ "resizable holes directly in Snapmaker Orca. Read more in the documentation." -#~ msgstr "" -#~ "Відняти деталь\n" -#~ "Чи знаєте ви, що можна віднімати одну мережу з іншої за допомогою " -#~ "модифікаторанегативної деталі? Таким чином можна, наприклад, створити " -#~ "легкоотвори, що змінюються безпосередньо в Snapmaker Orca. Додаткова " -#~ "інформацію наведено в документації." +#~ msgid "Set Position" +#~ msgstr "Встановити позицію" + +#~ msgid "%" +#~ msgstr "%" #, boost-format -#~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "Шаблон заповнення %1% не підтримує щільність 100%%." +#~ msgid "%1%" +#~ msgstr "%1%" -#~ msgid "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - switch to rectilinear pattern automaticlly\n" -#~ "No - reset density to default non 100% value automaticlly" -#~ msgstr "" -#~ "Переключити на прямолінійний шаблон?\n" -#~ "Так - автоматично перемикатися на прямолінійний шаблон\n" -#~ "Ні - автоматично скинути щільність до значення за замовчуванням, " -#~ "відмінноговід 100%" +#~ msgid "Right click the icon to fix model object" +#~ msgstr "Клацніть правою кнопкою миші значок, щоб виправити об'єкт моделі" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "" -#~ "Будь ласка, нагрійте сопло до температури вище 170 градусів перед " -#~ "завантаженням нитки." +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "Цільова модель єдина і не може бути поділена на частини." -#~ msgid "Show g-code window" -#~ msgstr "Показати вікно g-коду" +#~ msgid "?" +#~ msgstr "?" -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "Якщо увімкнено, з'явиться вікно g-коду." +#~ msgid "/" +#~ msgstr "/" -#, c-format -#~ msgid "Density of internal sparse infill, 100% means solid throughout" -#~ msgstr "" -#~ "Щільність внутрішнього розрідженого заповнення, 100%% означає суцільне " -#~ "заповнення по всій площі" +#~ msgid "℃" +#~ msgstr "°C" -#~ msgid "Tree support wall loops" -#~ msgstr "Контури опорної стінки дерева" +#~ msgid "mm³" +#~ msgstr "мм³" -#~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "Цей параметр визначає кількість периметрів навколо опори дерева" +#~ msgid "Color Scheme" +#~ msgstr "Колірна схема" + +#~ msgid "Percent" +#~ msgstr "Відсоток" + +#~ msgid "Used filament" +#~ msgstr "Філамент, що використовується" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +#~ msgid "More..." +#~ msgstr "Більше..." + +#~ msgid "More calibrations" +#~ msgstr "Більше калібрування" + +#~ msgid "SD Card" +#~ msgstr "SD картка" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "Немає картки SD" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD-картка не в порядку" #, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " не працює на 100%% щільності " +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "Помилка виймання пристрою %s(%s)." -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" +#~ msgid "mm/s²" +#~ msgstr "мм/с²" -#~ msgid "Tool-Lay on Face" -#~ msgstr "Інструмент-укладання на обличчя" +#~ msgid "mm/s" +#~ msgstr "мм/с" -#~ msgid "Export as STL" -#~ msgstr "Експортувати як STL" - -#~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "Введіть допустиме значення (K в діапазоні 0~0,5)" - -#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" +#~ msgid "" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." #~ msgstr "" -#~ "Введіть допустиме значення (K у діапазоні 0~0,5, N у діапазоні 0,6~2,0)" +#~ "Ця опція може бути змінена у налаштуваннях пізніше, під 'Поведінка " +#~ "завантаження'." -#~ msgid "Export all objects as STL" -#~ msgstr "Експортувати всі об'єкти у форматі STL" - -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "3mf не сумісний, завантажуйте лише дані геометрії!" - -#~ msgid "Incompatible 3mf" -#~ msgstr "Несумісний 3mf" - -#~ msgid "Add/Remove printers" -#~ msgstr "Додати/видалити принтери" +#~ msgid "Invalid number" +#~ msgstr "Неправильний номер" #, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s не підтримується AMS." - -#~ msgid "Don't remind me of this version again" -#~ msgstr "Не нагадуйте мені більше про цю версію" - -#~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "Помилка: IP або код доступу не вірні" - -#~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "Порядок внутрішні периметри/зовнішні периметри/заповнення" - -#~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "" -#~ "Роздрукуйте послідовність внутрішнього периметра, зовнішнього периметра " -#~ "та заповнення " - -#~ msgid "inner/outer/infill" -#~ msgstr "внутрішній/зовнішній/заповнення" - -#~ msgid "outer/inner/infill" -#~ msgstr "зовнішній/внутрішній/заповнення" - -#~ msgid "infill/inner/outer" -#~ msgstr "заповнення/внутрішній/зовнішній" - -#~ msgid "infill/outer/inner" -#~ msgstr "заповнення/зовнішній/внутрішній" - -#~ msgid "inner-outer-inner/infill" -#~ msgstr "внутрішній-внутрішній/заповнення" - -#~ msgid "Export 3MF" -#~ msgstr "Експорт 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "Експортуйте проект як 3MF." - -#~ msgid "Export slicing data" -#~ msgstr "Експорт даних нарізки" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "Експорт даних нарізки до папки." - -#~ msgid "Load slicing data" -#~ msgstr "Завантажити дані про нарізку" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "Завантажити кешовані дані нарізки з каталогу" - -#~ msgid "Slice" -#~ msgstr "Нарізка" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "Нарізати пластини: 0-всі пластини, i-пластина i, інші-неприпустимі" - -#~ msgid "Show command help." -#~ msgstr "Показати довідку про команду." - -#~ msgid "UpToDate" -#~ msgstr "До цього часу" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "Оновіть значення конфігурації 3mf до останніх." - -#~ msgid "mtcpp" -#~ msgstr "mtcpp" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "максимальна кількість трикутників на стіл для нарізки." - -#~ msgid "mstpp" -#~ msgstr "mstpp" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "максимальний час нарізки на стіл у секундах." - -#~ msgid "Normative check" -#~ msgstr "Нормативна перевірка" - -#~ msgid "Check the normative items." -#~ msgstr "Перевірте нормативні позиції." - -#~ msgid "Output Model Info" -#~ msgstr "Вихідна інформація про модель" - -#~ msgid "Output the model's information." -#~ msgstr "Виведіть інформацію про модель." - -#~ msgid "Export Settings" -#~ msgstr "Експорт налаштувань" - -#~ msgid "Export settings to a file." -#~ msgstr "Експорт налаштувань у файл." - -#~ msgid "Send progress to pipe" -#~ msgstr "Надіслати прогрес до каналу" - -#~ msgid "Send progress to pipe." -#~ msgstr "Надіслати прогрес до каналу." - -#~ msgid "Arrange Options" -#~ msgstr "Упорядкувати параметри" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "Параметри упорядкування: 0-disable, 1-enable, інші-auto" - -#~ msgid "Convert Unit" -#~ msgstr "Перетворити одиницю виміру" - -#~ msgid "Convert the units of model" -#~ msgstr "Перетворення одиниць моделі" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "Масштабуйте модель за допомогою плаваючого коефіцієнта" - -#~ msgid "Load General Settings" -#~ msgstr "Завантажити загальні налаштування" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "Завантажити налаштування процесу/машини із зазначеного файлу" - -#~ msgid "Load Filament Settings" -#~ msgstr "Завантажити налаштування філаменту" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "Завантажити налаштування філаменту із зазначеного списку файлів" - -#~ msgid "Skip Objects" -#~ msgstr "Пропустити об'єкти" - -#~ msgid "Skip some objects in this print" -#~ msgstr "Пропустити деякі об'єкти в цьому принті" - -#~ msgid "Output directory" -#~ msgstr "Вихідний каталог" - -#~ msgid "Output directory for the exported files." -#~ msgstr "Вихідний каталог для експортованих файлів." - -#~ msgid "Debug level" -#~ msgstr "Рівень налагодження" +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "сопло у пам'яті: %.2f %s" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "" -#~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " -#~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" +#~ "Температура столу при встановленій холодній пластині. Значення 0 означає " +#~ "що філамент не підтримує друк на Холодній Пластині SuperTack" + +#~ msgid "Ramming settings" +#~ msgstr "Налаштування раммінгу" + +#~ msgid "Profile dependencies" +#~ msgstr "Залежності профілю" + +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "пакет конфігурації несумісний з поточним APP." + +#~ msgid "Total ramming time" +#~ msgstr "Загальний час швидкої екструзії" + +#~ msgid "s" +#~ msgstr "c" + +#~ msgid "Total rammed volume" +#~ msgstr "Загальний обсяг швидкої екструзії" + +#~ msgid "Ramming line width" +#~ msgstr "Ширина ліній раммінгу" + +#~ msgid "Ramming line spacing" +#~ msgstr "Проміжки між лініями раммінгу" + +#~ msgid "resume" +#~ msgstr "продовжити" + +#~ msgid "Classic mode" +#~ msgstr "Класичний режим" + +#~ msgid "Enable this option to use classic mode." +#~ msgstr "Увімкнути цей параметр для використання класичного режиму" + +#~ msgid "Compatible machine" +#~ msgstr "Сумісна машина" + +#~ msgid "Compatible machine condition" +#~ msgstr "Сумісний стан машини" + +#~ msgid "Compatible process profiles condition" +#~ msgstr "Стан сумісних профілів процесів" + +#~ msgid "Default filament color" +#~ msgstr "Колір філаменту за замовчуванням" + +#~ msgid "mm³/s" +#~ msgstr "мм³/с" + +#~ msgid "g/cm³" +#~ msgstr "г/см³" + +#~ msgid "Rotate solid infill direction" +#~ msgstr "Повертати напрямок суцільного заповнення" + +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "Повертати напрямок суцільного заповнення на 90° для кожного шару." #~ msgid "" -#~ "3D Scene Operations\n" -#~ "Did you know how to control view and object/part selection with mouse and " -#~ "touchpanel in the 3D scene?" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" #~ msgstr "" -#~ "Операції з 3D сценами\n" -#~ "Чи знаєте ви, як керувати видом та вибором об'єкта/деталі за допомогою " -#~ "миші та Сенсорна панель у 3D сцені?" +#~ "Модель компенсації потоку, що використовується для коригування потоку для " +#~ "невеликих ділянок заповнення. Модель виражається у вигляді пари значень " +#~ "довжини екструзії та коефіцієнтів корекції потоку, розділених комами, по " +#~ "одному в рядку, у наступному форматі: \"1.234,5.678\"" #~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." #~ msgstr "" -#~ "Виправити модель\n" -#~ "Чи знаєте ви, що ви можете виправити пошкоджену 3D-модель, щоб " -#~ "уникнутивеликої кількості проблем із нарізкою?" +#~ "Найбільша висота шару, що друкується, для екструдера. Використовуваний tp " +#~ "обмежує максимальну висоту шару при включенні адаптивної висоти шару" -#~ msgid "Embeded" -#~ msgstr "Вбудовано" +#~ msgid "mm³/s²" +#~ msgstr "мм³/с²" #~ msgid "" -#~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." #~ msgstr "" -#~ "Файл конфігурації Snapmaker Orca може бути пошкоджений і не підлягає розбору. " -#~ "Видаліть файл і спробуйте ще раз." +#~ "Найнижча висота шару, що друкується, для екструдера. Використовуваний tp " +#~ "обмежує мінімальну висоту шару при включенні адаптивної висоти шару" -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "Мінімальна швидкість друку при уповільненні для охолодження" +#~ msgid "mm²" +#~ msgstr "мм²" + +#~ msgid "Retract on top layer" +#~ msgstr "Ретракт на верхньому шарі" #~ msgid "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clog." +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." #~ msgstr "" -#~ "Температура шару перевищує температуру скловання нитки. Будь ласка\n" -#~ "відчиняйте передні дверцята принтера перед печаткою, щоб уникнути " -#~ "засмічення сопла." - -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "Температура склування" +#~ "Примусове втягування на верхньому шарі. Вимкнення може запобігти " +#~ "засміченню на дуже повільних візерунках із малими переміщеннями, таких як " +#~ "крива Гільберта" #~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" #~ msgstr "" -#~ "При цій температурі матеріал стає м'яким. Таким чином, нагрівається шар " -#~ "не може бути гарячішим, ніж ця температура" +#~ "Деяка кількість матеріалу в екструдері витягується назад, щоб уникнути " +#~ "витікання під час тривалого переміщення. Встановіть нуль, щоб відключити " +#~ "втягування" -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "" -#~ "Увімкніть цю опцію, якщо машина оснащена вентилятором " -#~ "охолодженнядопоміжної частини" +#~ msgid "Speed of retractions." +#~ msgstr "Швидкість ретракту" #~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." #~ msgstr "" -#~ "Швидкість вентилятора охолодження допоміжної частини. " -#~ "ДопоміжнийВентилятор буде працювати з такою швидкістю під час друку, за " -#~ "винятком перших кількох шарів, які не визначаються шарами охолодження" +#~ "Швидкість перезарядки філпмента в екструдер. Нуль означає ту ж швидкість " +#~ "при ретракті" -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "" -#~ "Порожні шари навколо дна замінюються найближчими нормальними шарами." +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "Відстань між лініями підтримки. Нуль означає суцільну підтримку" -#~ msgid "The model has too many empty layers." -#~ msgstr "У моделі занадто багато порожніх шарів." - -#~ msgid "Cali" -#~ msgstr "Калі" - -#~ msgid "Calibration of extrusion" -#~ msgstr "АМС не підключено" - -#, c-format, boost-format -#~ msgid "" -#~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" -#~ msgstr "" -#~ "Температура шару іншого шару нижче температури шару вихідного шару більш " -#~ "ніж на %d градусів за Цельсієм.\n" -#~ "Це може призвести до відриву моделі від робочої пластини під час друку" +#~ msgid "Load filament IDs for each object" +#~ msgstr "Завантажувати id філаментів для кожного об'єкта" #~ msgid "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blocked and printing failure\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed" +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" #~ msgstr "" -#~ "Температура шару вище температури скловання цієї нитки.\n" -#~ "Це може призвести до блокування сопла та збою друку\n" -#~ " Будь ласка , тримайте принтер відкритим під час друку , щоб забезпечити " -#~ "доступ повітря циркуляція або знизити температуру столу" +#~ "Зараз у нас є можливість автоматичної калібрації для різних філаментів, " +#~ "яка є повністю автоматизованою, і результат буде збережено в принтері для " +#~ "подальшого використання. Вам потрібно робити калібрування лише в таких " +#~ "обмежених випадках:\n" +#~ "\n" +#~ "1. Якщо ви вводите новий філамент різних брендів/моделей або філамент " +#~ "зволожений;\n" +#~ "2. Якщо сопло зношене або замінене новим;\n" +#~ "3. Якщо максимальна об’ємна швидкість або температура друку змінена в " +#~ "налаштуваннях філаменту." -#~ msgid "Total Time Estimation" -#~ msgstr "Оцінка загального часу" +#~ msgid "step: " +#~ msgstr "крок: " -#~ msgid "Resonance frequency identification" -#~ msgstr "Ідентифікація резонансної частоти" +#~ msgid "mm/mm" +#~ msgstr "мм/мм" -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "Високотемпературна пластина" +#~ msgid "Load STL" +#~ msgstr "Завантажити STL" -#~ msgid "Recommended temperature range" -#~ msgstr "Рекомендований діапазон температур" +#~ msgid "Load svg" +#~ msgstr "Завантажити SVG" -#~ msgid "High Temp Plate" -#~ msgstr "Високотемпературна пластина" +#~ msgid "Back Page 1" +#~ msgstr "Повернутися на 1 сторінку" + +#~ msgid "Delete Filament" +#~ msgstr "Видалити Філамент" + +#~ msgid "Refresh Printers" +#~ msgstr "Оновити принтери" #~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." #~ msgstr "" -#~ "Температура столу, коли встановлено високотемпературний стіл. Значення 0 " -#~ "означає філамент не підтримує друк на високотемпературному столі" - -#~ msgid "Internal bridge support thickness" -#~ msgstr "Товщина внутрішньої опори мосту" +#~ "Порівняно з типовим профілем для насадки 0,2 мм, це має меншу висоту " +#~ "шару, і результатом є майже невидимі лінії шару та вища якість друку, але " +#~ "коротший час друку." #~ msgid "" -#~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " -#~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." #~ msgstr "" -#~ "Якщо ввімкнуто, опорні петлі будуть створюватися під контурами внутрішніх " -#~ "мости. Ці опорні петлі можуть запобігти екструзії внутрішніх мостівпо " -#~ "повітрю та покращити якість верхньої поверхні, особливо коли " -#~ "розрідженістьщільність заповнення низька. Це значення визначає товщину " -#~ "опори цикли. 0 означає вимкнути цю функцію" - -#, c-format, boost-format -#~ msgid "" -#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" -#~ msgstr "" -#~ "Max \"прискорення до уповільнення\" для Klipper буде скориговано на % o " -#~ "автоматично" +#~ "Порівняно з типовим профілем для насадки діаметром 0,2 мм, цей профіль " +#~ "має меншу висоту шару, що призводить до мінімальних ліній шарування та " +#~ "вищої якості друку, але скорочує час друку." #~ msgid "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." #~ msgstr "" -#~ "Стиль та форма опори. Для звичайної підтримки проектування опор у " -#~ "звичайнусітка створить більш стійкі опори (за замовчуванням), тоді як " -#~ "завзяті опори заощадять матеріал і зменшать утворення рубців на " -#~ "об'єктах.\n" -#~ "Для підтримки дерева тонкий стиль об'єднуватиме гілки більш агресивно і " -#~ "заощаджувати багато матеріалу (за замовчуванням), в той час як гібридний " -#~ "стильСтворить структуру, аналогічну звичайній підтримці при великих " -#~ "плоских звисах." - -#~ msgid "Target chamber temperature" -#~ msgstr "Температура цільової камери" - -#~ msgid "Bed temperature difference" -#~ msgstr "Різниця температур шару" +#~ "Він має дуже велику висоту шару, що призводить до дуже помітних ліній " +#~ "шару, низької якості друку і загального часу друку." #~ msgid "" -#~ "Do not recommend bed temperature of other layer to be lower than initial " -#~ "layer for more than this threshold. Too low bed temperature of other " -#~ "layer may cause the model broken free from build plate" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." #~ msgstr "" -#~ "Не рекомендується, щоб температура шару іншого шару була нижчою, ніж " -#~ "температура вихідного шару, при перевищенні цього порога. Надто " -#~ "низькатемпература шару іншого шару може призвести до того, що модель " -#~ "будерозірвана без конструкційної пластини" - -#~ msgid "Orient the model" -#~ msgstr "Орієнтувати модель" +#~ "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має більшу " +#~ "висоту шару, що призводить до дуже помітних ліній шару і значно нижчої " +#~ "якості друку, але коротшого часу друку у деяких випадках друку." #~ msgid "" -#~ "Please input valid values:\n" -#~ "start > 0 step >= 0\n" -#~ "end > start + step)" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." #~ msgstr "" -#~ "Введіть допустимі значення:\n" -#~ "початок > 0 крок >= 0\n" -#~ "кінець > початок + крок)" +#~ "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має набагато " +#~ "більшу висоту шару, що призводить до надзвичайно помітних ліній шару і " +#~ "значно нижчої якості друку, але набагато коротшого часу друку у деяких " +#~ "випадках друку." #~ msgid "" -#~ "Please input valid values:\n" -#~ "start > 10 step >= 0\n" -#~ "end > start + step)" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." #~ msgstr "" -#~ "Введіть допустимі значення:\n" -#~ "старт > 10 кроків >= 0\n" -#~ "кінець > початок + крок)" +#~ "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має меншу " +#~ "висоту шару, що призводить до менше, але все ще помітних ліній шару і " +#~ "трохи вищої якості друку, але довшого часу друку у деяких випадках друку." + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "Підключення до Flashforge працює правильно." + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "Не вдалося підключитися до Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "Встановіть тип кайми на \"Мальована\"" \ No newline at end of file diff --git a/localization/i18n/vi/Snapmaker_Orca_vi.po b/localization/i18n/vi/Snapmaker_Orca_vi.po new file mode 100644 index 0000000000..dee667491e --- /dev/null +++ b/localization/i18n/vi/Snapmaker_Orca_vi.po @@ -0,0 +1,21235 @@ +msgid "" +msgstr "" +"Project-Id-Version: Snapmaker Orca\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-10-02 17:43+0700\n" +"Last-Translator: \n" +"Language-Team: hainguyen.ts13@gmail.com\n" +"Language: vi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" +"X-Generator: Poedit 3.7\n" +"X-Poedit-Basepath: .\n" + +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "TPU không được hỗ trợ bởi AMS." + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "" +"PVA ẩm sẽ trở nên mềm dẻo và bị kẹt bên trong AMS, vui lòng chú ý làm khô nó " +"trước khi dùng." + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "" +"Filament CF/GF cứng và giòn, dễ gãy hoặc bị kẹt trong AMS, vui lòng dùng " +"thận trọng." + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "Độ ẩm AMS hiện tại" + +msgid "Humidity" +msgstr "Độ ẩm" + +msgid "Temperature" +msgstr "Nhiệt độ" + +msgid "Left Time" +msgstr "Thời gian còn lại" + +msgid "Drying" +msgstr "Đang sấy" + +msgid "Idle" +msgstr "Rảnh" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "Số serial:" + +msgid "Version:" +msgstr "Phiên bản:" + +msgid "Latest version" +msgstr "Phiên bản mới nhất" + +msgid "Support Painting" +msgstr "Vẽ support" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "Con lăn chuột" + +msgid "Section view" +msgstr "Chế độ xem mặt cắt" + +msgid "Reset direction" +msgstr "Đặt lại hướng" + +msgid "Pen size" +msgstr "Kích thước bút" + +msgid "Left mouse button" +msgstr "Chuột trái" + +msgid "Enforce supports" +msgstr "Bắt buộc support" + +msgid "Right mouse button" +msgstr "Chuột phải" + +msgid "Block supports" +msgstr "Chặn support" + +msgid "Erase" +msgstr "Xóa" + +msgid "Erase all painting" +msgstr "Xóa tất cả vẽ" + +msgid "Highlight overhang areas" +msgstr "Tô sáng vùng overhang" + +msgid "Gap fill" +msgstr "Lấp khe" + +msgid "Perform" +msgstr "Thực hiện" + +msgid "Gap area" +msgstr "Vùng khe" + +msgid "Tool type" +msgstr "Loại công cụ" + +msgid "Smart fill angle" +msgstr "Góc tô thông minh" + +msgid "On overhangs only" +msgstr "Chỉ trên overhang" + +msgid "Auto support threshold angle: " +msgstr "Góc ngưỡng tự động support: " + +msgid "Circle" +msgstr "Hình tròn" + +msgid "Sphere" +msgstr "Hình cầu" + +msgid "Fill" +msgstr "Tô" + +msgid "Gap Fill" +msgstr "Lấp khe" + +#, boost-format +msgid "Allows painting only on facets selected by: \"%1%\"" +msgstr "Chỉ cho phép vẽ trên mặt được chọn bởi: \"%1%\"" + +msgid "Highlight faces according to overhang angle." +msgstr "Tô sáng các mặt theo góc overhang." + +msgid "No auto support" +msgstr "Không tự động support" + +msgid "Support Generated" +msgstr "Đã tạo support" + +msgid "Gizmo-Place on Face" +msgstr "Gizmo - Đặt lên mặt" + +msgid "Lay on face" +msgstr "Đặt lên mặt" + +#, boost-format +msgid "" +"Filament count exceeds the maximum number that painting tool supports. Only " +"the first %1% filaments will be available in painting tool." +msgstr "" +"Số lượng filament vượt quá số tối đa mà công cụ vẽ hỗ trợ. Chỉ %1% filament " +"đầu tiên sẽ khả dụng trong công cụ vẽ." + +msgid "Color Painting" +msgstr "Vẽ màu" + +msgid "Pen shape" +msgstr "Hình dạng bút" + +msgid "Paint" +msgstr "Vẽ" + +msgid "Key 1~9" +msgstr "Phím 1~9" + +msgid "Choose filament" +msgstr "Chọn filament" + +msgid "Edge detection" +msgstr "Phát hiện cạnh" + +msgid "Triangles" +msgstr "Tam giác" + +msgid "Filaments" +msgstr "Filament" + +msgid "Brush" +msgstr "Bút vẽ" + +msgid "Smart fill" +msgstr "Tô thông minh" + +msgid "Bucket fill" +msgstr "Tô thùng" + +msgid "Height range" +msgstr "Phạm vi chiều cao" + +msgid "Enter" +msgstr "Enter" + +msgid "Toggle Wireframe" +msgstr "Bật/tắt khung dây" + +msgid "Remap filaments" +msgstr "Ánh xạ lại filament" + +msgid "Remap" +msgstr "Ánh xạ lại" + +msgid "Cancel" +msgstr "Hủy" + +msgid "Shortcut Key " +msgstr "Phím tắt " + +msgid "Triangle" +msgstr "Tam giác" + +msgid "Height Range" +msgstr "Phạm vi chiều cao" + +msgid "Vertical" +msgstr "Dọc" + +msgid "Horizontal" +msgstr "Ngang" + +msgid "Remove painted color" +msgstr "Xóa màu đã vẽ" + +#, boost-format +msgid "Painted using: Filament %1%" +msgstr "Vẽ bằng: Filament %1%" + +msgid "Filament remapping finished." +msgstr "Ánh xạ lại filament hoàn tất." + +msgid "Paint-on fuzzy skin" +msgstr "Tô fuzzy skin" + +msgid "Brush size" +msgstr "Kích thước bút" + +msgid "Brush shape" +msgstr "Hình dạng bút" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + +msgid "Move" +msgstr "Di chuyển" + +msgid "Please select at least one object." +msgstr "Vui lòng chọn ít nhất một vật thể." + +msgid "Gizmo-Move" +msgstr "Gizmo - Di chuyển" + +msgid "Rotate" +msgstr "Xoay" + +msgid "Gizmo-Rotate" +msgstr "Gizmo - Xoay" + +msgid "Optimize orientation" +msgstr "Tối ưu định hướng" + +msgid "Apply" +msgstr "Áp dụng" + +msgid "Scale" +msgstr "Tỷ lệ" + +msgid "Gizmo-Scale" +msgstr "Gizmo - Tỷ lệ" + +msgid "Error: Please close all toolbar menus first" +msgstr "Lỗi: Vui lòng đóng tất cả menu thanh công cụ trước" + +msgid "in" +msgstr "in" + +msgid "mm" +msgstr "mm" + +msgid "Part selection" +msgstr "Chọn phần" + +msgid "Fixed step drag" +msgstr "Kéo bước cố định" + +msgid "Single sided scaling" +msgstr "Co giãn một mặt" + +msgid "Position" +msgstr "Vị trí" + +msgid "Rotate (relative)" +msgstr "Xoay (tương đối)" + +msgid "Scale ratios" +msgstr "Tỷ lệ co giãn" + +msgid "Object Operations" +msgstr "Thao tác vật thể" + +msgid "Volume Operations" +msgstr "Thao tác thể tích" + +msgid "Translate" +msgstr "Dịch chuyển" + +msgid "Group Operations" +msgstr "Thao tác nhóm" + +msgid "Set Orientation" +msgstr "Đặt định hướng" + +msgid "Set Scale" +msgstr "Đặt tỷ lệ" + +msgid "Reset Position" +msgstr "Đặt lại vị trí" + +msgid "Reset Rotation" +msgstr "Đặt lại xoay" + +msgid "Object coordinates" +msgstr "Tọa độ vật thể" + +msgid "World coordinates" +msgstr "Tọa độ thế giới" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "Đặt lại xoay hiện tại về giá trị khi mở công cụ xoay." + +msgid "Rotate (absolute)" +msgstr "Xoay (tuyệt đối)" + +msgid "Reset current rotation to real zeros." +msgstr "Đặt lại xoay hiện tại về số không thực." + +msgid "Part coordinates" +msgstr "Tọa độ phần" + +#. TRN - Input label. Be short as possible +msgid "Size" +msgstr "Kích thước" + +msgid "uniform scale" +msgstr "tỷ lệ đồng đều" + +msgid "Planar" +msgstr "Phẳng" + +msgid "Dovetail" +msgstr "Đuôi chim" + +msgid "Auto" +msgstr "Tự động" + +msgid "Manual" +msgstr "Thủ công" + +msgid "Plug" +msgstr "Nút cắm" + +msgid "Dowel" +msgstr "Chốt gỗ" + +msgid "Snap" +msgstr "Chụp" + +msgid "Prism" +msgstr "Lăng trụ" + +msgid "Frustum" +msgstr "Hình chóp cụt" + +msgid "Square" +msgstr "Vuông" + +msgid "Hexagon" +msgstr "Lục giác" + +msgid "Keep orientation" +msgstr "Giữ định hướng" + +msgid "Place on cut" +msgstr "Đặt trên mặt cắt" + +msgid "Flip upside down" +msgstr "Lật ngược" + +msgid "Connectors" +msgstr "Connector" + +msgid "Type" +msgstr "Loại" + +msgid "Style" +msgstr "Kiểu" + +msgid "Shape" +msgstr "Hình dạng" + +#. TRN - Input label. Be short as possible +#. Size in emboss direction +#. TRN - Input label. Be short as possible +msgid "Depth" +msgstr "Độ sâu" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "Xoay" + +msgid "Groove" +msgstr "Rãnh" + +msgid "Width" +msgstr "Độ rộng" + +msgid "Flap Angle" +msgstr "Góc cánh" + +msgid "Groove Angle" +msgstr "Góc rãnh" + +msgid "Part" +msgstr "Phần" + +msgid "Object" +msgstr "Vật thể" + +msgid "" +"Click to flip the cut plane\n" +"Drag to move the cut plane" +msgstr "" +"Nhấn để lật mặt cắt\n" +"Kéo để di chuyển mặt cắt" + +msgid "" +"Click to flip the cut plane\n" +"Drag to move the cut plane\n" +"Right-click a part to assign it to the other side" +msgstr "" +"Nhấn để lật mặt cắt\n" +"Kéo để di chuyển mặt cắt\n" +"Nhấn chuột phải một phần để gán nó sang phía bên kia" + +msgid "Move cut plane" +msgstr "Di chuyển mặt cắt" + +msgid "Mode" +msgstr "Chế độ" + +msgid "Change cut mode" +msgstr "Đổi chế độ cắt" + +msgid "Tolerance" +msgstr "Dung sai" + +msgid "Drag" +msgstr "Kéo" + +msgid "Draw cut line" +msgstr "Vẽ đường cắt" + +msgid "Left click" +msgstr "Nhấn trái" + +msgid "Add connector" +msgstr "Thêm connector" + +msgid "Right click" +msgstr "Nhấn phải" + +msgid "Remove connector" +msgstr "Xóa connector" + +msgid "Move connector" +msgstr "Di chuyển connector" + +msgid "Add connector to selection" +msgstr "Thêm connector vào lựa chọn" + +msgid "Remove connector from selection" +msgstr "Xóa connector khỏi lựa chọn" + +msgid "Select all connectors" +msgstr "Chọn tất cả connector" + +msgid "Cut" +msgstr "Cắt" + +msgid "Rotate cut plane" +msgstr "Xoay mặt cắt" + +msgid "Remove connectors" +msgstr "Xóa connector" + +msgid "Bulge" +msgstr "Phồng" + +msgid "Bulge proportion related to radius" +msgstr "Tỷ lệ phồng liên quan đến bán kính" + +msgid "Space" +msgstr "Khoảng cách" + +msgid "Space proportion related to radius" +msgstr "Tỷ lệ khoảng cách liên quan đến bán kính" + +msgid "Confirm connectors" +msgstr "Xác nhận connector" + +msgid "Build Volume" +msgstr "Thể tích in" + +msgid "Flip cut plane" +msgstr "Lật mặt cắt" + +msgid "Groove change" +msgstr "Thay đổi rãnh" + +msgid "Reset" +msgstr "Đặt lại" + +#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. +msgid "Edited" +msgstr "Đã chỉnh sửa" + +msgid "Cut position" +msgstr "Vị trí cắt" + +msgid "Reset cutting plane" +msgstr "Đặt lại mặt cắt" + +msgid "Edit connectors" +msgstr "Chỉnh sửa connector" + +msgid "Add connectors" +msgstr "Thêm connector" + +msgid "Reset cut" +msgstr "Đặt lại cắt" + +msgid "Reset cutting plane and remove connectors" +msgstr "Đặt lại mặt cắt và xóa connector" + +msgid "Upper part" +msgstr "Phần trên" + +msgid "Lower part" +msgstr "Phần dưới" + +msgid "Keep" +msgstr "Giữ" + +msgid "Flip" +msgstr "Lật" + +msgid "After cut" +msgstr "Sau khi cắt" + +msgid "Cut to parts" +msgstr "Cắt thành phần" + +msgid "Perform cut" +msgstr "Thực hiện cắt" + +msgid "Warning" +msgstr "Cảnh báo" + +msgid "Invalid connectors detected" +msgstr "Phát hiện connector không hợp lệ" + +#, c-format, boost-format +msgid "%1$d connector is out of cut contour" +msgid_plural "%1$d connectors are out of cut contour" +msgstr[0] "%1$d connector nằm ngoài đường viền cắt" + +#, c-format, boost-format +msgid "%1$d connector is out of object" +msgid_plural "%1$d connectors are out of object" +msgstr[0] "%1$d connector nằm ngoài vật thể" + +msgid "Some connectors are overlapped" +msgstr "Một số connector bị chồng lên nhau" + +msgid "Select at least one object to keep after cutting." +msgstr "Chọn ít nhất một vật thể để giữ sau khi cắt." + +msgid "Cut plane is placed out of object" +msgstr "Mặt cắt được đặt ngoài vật thể" + +msgid "Cut plane with groove is invalid" +msgstr "Mặt cắt có rãnh không hợp lệ" + +msgid "Connector" +msgstr "Connector" + +msgid "Cut by Plane" +msgstr "Cắt bằng mặt phẳng" + +msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" +msgstr "" +"cạnh non-manifold được tạo bởi công cụ cắt, bạn có muốn sửa ngay không?" + +msgid "Repairing model object" +msgstr "Đang sửa vật thể model" + +msgid "Cut by line" +msgstr "Cắt bằng đường" + +msgid "Delete connector" +msgstr "Xóa connector" + +msgid "Mesh name" +msgstr "Tên mesh" + +msgid "Detail level" +msgstr "Mức chi tiết" + +msgid "Decimate ratio" +msgstr "Tỷ lệ giảm" + +#, boost-format +msgid "" +"Processing model '%1%' with more than 1M triangles could be slow. It is " +"highly recommended to simplify the model." +msgstr "" +"Xử lý model '%1%' có hơn 1M tam giác có thể chậm. Rất khuyến nghị đơn giản " +"hóa model." + +msgid "Simplify model" +msgstr "Đơn giản hóa model" + +msgid "Simplify" +msgstr "Đơn giản hóa" + +msgid "Simplification is currently only allowed when a single part is selected" +msgstr "Đơn giản hóa hiện chỉ cho phép khi một phần duy nhất được chọn" + +msgid "Error" +msgstr "Lỗi" + +msgid "Extra high" +msgstr "Rất cao" + +msgid "High" +msgstr "Cao" + +msgid "Medium" +msgstr "Trung bình" + +msgid "Low" +msgstr "Thấp" + +msgid "Extra low" +msgstr "Rất thấp" + +#, c-format, boost-format +msgid "%d triangles" +msgstr "%d tam giác" + +msgid "Show wireframe" +msgstr "Hiện khung dây" + +msgid "Can't apply when processing preview." +msgstr "Không thể áp dụng khi đang xử lý xem trước." + +msgid "Operation already cancelling. Please wait a few seconds." +msgstr "Thao tác đang hủy. Vui lòng chờ vài giây." + +msgid "Face recognition" +msgstr "Nhận dạng mặt" + +msgid "Perform Recognition" +msgstr "Thực hiện nhận dạng" + +msgid "Enforce seam" +msgstr "Bắt buộc seam" + +msgid "Block seam" +msgstr "Chặn seam" + +msgid "Seam painting" +msgstr "Vẽ seam" + +msgid "Remove selection" +msgstr "Xóa lựa chọn" + +msgid "Entering Seam painting" +msgstr "Đang vào vẽ seam" + +msgid "Leaving Seam painting" +msgstr "Đang rời vẽ seam" + +msgid "Paint-on seam editing" +msgstr "Chỉnh sửa seam bằng vẽ" + +#. TRN - Input label. Be short as possible +#. Select look of letter shape +msgid "Font" +msgstr "Font" + +msgid "Thickness" +msgstr "Độ dày" + +msgid "Text Gap" +msgstr "Khoảng cách chữ" + +msgid "Angle" +msgstr "Góc" + +msgid "" +"Embedded\n" +"depth" +msgstr "" +"Độ sâu\n" +"nhúng" + +msgid "Input text" +msgstr "Nhập chữ" + +msgid "Surface" +msgstr "Bề mặt" + +msgid "Horizontal text" +msgstr "Chữ ngang" + +msgid "Mouse move up or down" +msgstr "Di chuyển chuột lên hoặc xuống" + +msgid "Rotate text" +msgstr "Xoay chữ" + +msgid "Text shape" +msgstr "Hình dạng chữ" + +#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe +msgid "Text rotate" +msgstr "Xoay chữ" + +#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface +msgid "Text move" +msgstr "Di chuyển chữ" + +msgid "Set Mirror" +msgstr "Đặt gương" + +msgid "Embossed text" +msgstr "Chữ emboss" + +msgid "Enter emboss gizmo" +msgstr "Vào chế độ emboss gizmo" + +msgid "Leave emboss gizmo" +msgstr "Rời chế độ emboss gizmo" + +msgid "Embossing actions" +msgstr "Thao tác emboss" + +msgid "Emboss" +msgstr "Emboss" + +msgid "NORMAL" +msgstr "NORMAL" + +msgid "SMALL" +msgstr "SMALL" + +msgid "ITALIC" +msgstr "ITALIC" + +msgid "SWISS" +msgstr "SWISS" + +msgid "MODERN" +msgstr "MODERN" + +msgid "First font" +msgstr "Font đầu tiên" + +msgid "Default font" +msgstr "Font mặc định" + +msgid "Advanced" +msgstr "Nâng cao" + +msgid "" +"The text cannot be written using the selected font. Please try choosing a " +"different font." +msgstr "Chữ không thể viết bằng font đã chọn. Vui lòng thử chọn font khác." + +msgid "Embossed text cannot contain only white spaces." +msgstr "Chữ emboss không thể chỉ chứa khoảng trắng." + +msgid "Text contains character glyph (represented by '?') unknown by font." +msgstr "Chữ chứa ký tự (đại diện bằng '?') không có trong font." + +msgid "Text input doesn't show font skew." +msgstr "Nhập chữ không hiển thị độ nghiêng font." + +msgid "Text input doesn't show font boldness." +msgstr "Nhập chữ không hiển thị độ đậm font." + +msgid "Text input doesn't show gap between lines." +msgstr "Nhập chữ không hiển thị khoảng cách giữa các dòng." + +msgid "Too tall, diminished font height inside text input." +msgstr "Quá cao, giảm chiều cao font trong nhập chữ." + +msgid "Too small, enlarged font height inside text input." +msgstr "Quá nhỏ, tăng chiều cao font trong nhập chữ." + +msgid "Text doesn't show current horizontal alignment." +msgstr "Chữ không hiển thị căn chỉnh ngang hiện tại." + +msgid "Revert font changes." +msgstr "Hoàn tác thay đổi font." + +#, boost-format +msgid "Font \"%1%\" can't be selected." +msgstr "Font \"%1%\" không thể chọn." + +msgid "Operation" +msgstr "Thao tác" + +msgid "Join" +msgstr "Nối" + +msgid "Click to change text into object part." +msgstr "Nhấn để đổi chữ thành phần vật thể." + +msgid "You can't change a type of the last solid part of the object." +msgstr "Bạn không thể đổi loại của phần rắn cuối cùng của vật thể." + +msgctxt "EmbossOperation" +msgid "Cut" +msgstr "Cắt" + +msgid "Click to change part type into negative volume." +msgstr "Nhấn để đổi loại phần thành thể tích âm." + +msgid "Modifier" +msgstr "Modifier" + +msgid "Click to change part type into modifier." +msgstr "Nhấn để đổi loại phần thành modifier." + +msgid "Change Text Type" +msgstr "Đổi loại chữ" + +#, boost-format +msgid "Rename style (%1%) for embossing text" +msgstr "Đổi tên kiểu (%1%) cho chữ emboss" + +msgid "Name can't be empty." +msgstr "Tên không được để trống." + +msgid "Name has to be unique." +msgstr "Tên phải duy nhất." + +msgid "OK" +msgstr "OK" + +msgid "Rename style" +msgstr "Đổi tên kiểu" + +msgid "Rename current style." +msgstr "Đổi tên kiểu hiện tại." + +msgid "Can't rename temporary style." +msgstr "Không thể đổi tên kiểu tạm thời." + +msgid "First Add style to list." +msgstr "Trước tiên thêm kiểu vào danh sách." + +#, boost-format +msgid "Save %1% style" +msgstr "Lưu kiểu %1%" + +msgid "No changes to save." +msgstr "Không có thay đổi để lưu." + +msgid "New name of style" +msgstr "Tên mới của kiểu" + +msgid "Save as new style" +msgstr "Lưu thành kiểu mới" + +msgid "Only valid font can be added to style." +msgstr "Chỉ font hợp lệ mới có thể thêm vào kiểu." + +msgid "Add style to my list." +msgstr "Thêm kiểu vào danh sách của tôi." + +msgid "Save as new style." +msgstr "Lưu thành kiểu mới." + +msgid "Remove style" +msgstr "Xóa kiểu" + +msgid "Can't remove the last existing style." +msgstr "Không thể xóa kiểu hiện có cuối cùng." + +#, boost-format +msgid "Are you sure you want to permanently remove the \"%1%\" style?" +msgstr "Bạn có chắc muốn xóa vĩnh viễn kiểu \"%1%\"?" + +#, boost-format +msgid "Delete \"%1%\" style." +msgstr "Xóa kiểu \"%1%\"." + +#, boost-format +msgid "Can't delete \"%1%\". It is last style." +msgstr "Không thể xóa \"%1%\". Đây là kiểu cuối cùng." + +#, boost-format +msgid "Can't delete temporary style \"%1%\"." +msgstr "Không thể xóa kiểu tạm thời \"%1%\"." + +#, boost-format +msgid "Modified style \"%1%\"" +msgstr "Kiểu đã sửa \"%1%\"" + +#, boost-format +msgid "Current style is \"%1%\"" +msgstr "Kiểu hiện tại là \"%1%\"" + +#, boost-format +msgid "" +"Changing style to \"%1%\" will discard current style modification.\n" +"\n" +"Would you like to continue anyway?" +msgstr "" +"Đổi sang kiểu \"%1%\" sẽ hủy sửa đổi kiểu hiện tại.\n" +"\n" +"Bạn vẫn muốn tiếp tục?" + +msgid "Not valid style." +msgstr "Kiểu không hợp lệ." + +#, boost-format +msgid "Style \"%1%\" can't be used and will be removed from a list." +msgstr "Kiểu \"%1%\" không thể dùng và sẽ bị xóa khỏi danh sách." + +msgid "Unset italic" +msgstr "Bỏ nghiêng" + +msgid "Set italic" +msgstr "Đặt nghiêng" + +msgid "Unset bold" +msgstr "Bỏ đậm" + +msgid "Set bold" +msgstr "Đặt đậm" + +msgid "Revert text size." +msgstr "Hoàn tác kích thước chữ." + +msgid "Revert embossed depth." +msgstr "Hoàn tác độ sâu emboss." + +msgid "" +"Advanced options cannot be changed for the selected font.\n" +"Select another font." +msgstr "" +"Tùy chọn nâng cao không thể đổi cho font đã chọn.\n" +"Chọn font khác." + +msgid "Revert using of model surface." +msgstr "Hoàn tác dùng bề mặt model." + +msgid "Revert Transformation per glyph." +msgstr "Hoàn tác biến đổi theo ký tự." + +msgid "Set global orientation for whole text." +msgstr "Đặt định hướng toàn cục cho toàn bộ chữ." + +msgid "Set position and orientation per glyph." +msgstr "Đặt vị trí và định hướng theo ký tự." + +msgctxt "Alignment" +msgid "Left" +msgstr "Trái" + +msgctxt "Alignment" +msgid "Center" +msgstr "Giữa" + +msgctxt "Alignment" +msgid "Right" +msgstr "Phải" + +msgctxt "Alignment" +msgid "Top" +msgstr "Trên" + +msgctxt "Alignment" +msgid "Middle" +msgstr "Giữa" + +msgctxt "Alignment" +msgid "Bottom" +msgstr "Dưới" + +msgid "Revert alignment." +msgstr "Hoàn tác căn chỉnh." + +#. TRN EmbossGizmo: font units +msgid "points" +msgstr "điểm" + +msgid "Revert gap between characters" +msgstr "Hoàn tác khoảng cách giữa các ký tự" + +msgid "Distance between characters" +msgstr "Khoảng cách giữa các ký tự" + +msgid "Revert gap between lines" +msgstr "Hoàn tác khoảng cách giữa các dòng" + +msgid "Distance between lines" +msgstr "Khoảng cách giữa các dòng" + +msgid "Undo boldness" +msgstr "Hoàn tác độ đậm" + +msgid "Tiny / Wide glyphs" +msgstr "Ký tự nhỏ / rộng" + +msgid "Undo letter's skew" +msgstr "Hoàn tác độ nghiêng chữ" + +msgid "Italic strength ratio" +msgstr "Tỷ lệ độ mạnh nghiêng" + +msgid "Undo translation" +msgstr "Hoàn tác dịch chuyển" + +msgid "Distance of the center of the text to the model surface." +msgstr "Khoảng cách từ tâm chữ đến bề mặt model." + +msgid "Undo rotation" +msgstr "Hoàn tác xoay" + +msgid "Rotate text Clockwise." +msgstr "Xoay chữ thuận chiều kim đồng hồ." + +msgid "Unlock the text's rotation when moving text along the object's surface." +msgstr "Mở khóa xoay của chữ khi di chuyển chữ dọc theo bề mặt vật thể." + +msgid "Lock the text's rotation when moving text along the object's surface." +msgstr "Khóa xoay của chữ khi di chuyển chữ dọc theo bề mặt vật thể." + +msgid "Select from True Type Collection." +msgstr "Chọn từ True Type Collection." + +msgid "Set text to face camera" +msgstr "Đặt chữ hướng về camera" + +msgid "Orient the text towards the camera." +msgstr "Định hướng chữ về phía camera." + +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "Font \"%1%\" không thể sử dụng. Vui lòng chọn font khác." + +#, boost-format +msgid "" +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." +msgstr "" +"Không thể tải chính xác font (\"%1%\"). Ứng dụng đã chọn font tương tự (\"%2%" +"\"). Bạn phải chỉ định font để bật chỉnh sửa chữ." + +msgid "No symbol" +msgstr "Không có ký hiệu" + +msgid "Loading" +msgstr "Đang tải" + +msgid "In queue" +msgstr "Trong hàng đợi" + +#. TRN - Input label. Be short as possible +#. Height of one text line - Font Ascent +msgid "Height" +msgstr "Chiều cao" + +#. TRN - Input label. Be short as possible +#. Copy surface of model on surface of the embossed text +#. TRN - Input label. Be short as possible +msgid "Use surface" +msgstr "Dùng bề mặt" + +#. TRN - Input label. Be short as possible +#. Option to change projection on curved surface +#. for each character(glyph) in text separately +msgid "Per glyph" +msgstr "Theo ký tự" + +#. TRN - Input label. Be short as possible +#. Align Top|Middle|Bottom and Left|Center|Right +msgid "Alignment" +msgstr "Căn chỉnh" + +#. TRN - Input label. Be short as possible +msgid "Char gap" +msgstr "Khoảng ký tự" + +#. TRN - Input label. Be short as possible +msgid "Line gap" +msgstr "Khoảng dòng" + +#. TRN - Input label. Be short as possible +msgid "Boldness" +msgstr "Độ đậm" + +#. TRN - Input label. Be short as possible +#. Like Font italic +msgid "Skew ratio" +msgstr "Tỷ lệ nghiêng" + +#. TRN - Input label. Be short as possible +#. Distance from model surface to be able +#. move text as part fully into not flat surface +#. move text as modifier fully out of not flat surface +#. TRN - Input label. Be short as possible +msgid "From surface" +msgstr "Từ bề mặt" + +#. TRN - Input label. Be short as possible +#. Keep vector from bottom to top of text aligned with printer Y axis +msgid "Keep up" +msgstr "Giữ hướng" + +#. TRN - Input label. Be short as possible. +#. Some Font file contain multiple fonts inside and +#. this is numerical selector of font inside font collections +msgid "Collection" +msgstr "Bộ sưu tập" + +#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe +msgid "SVG rotate" +msgstr "Xoay SVG" + +#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface +msgid "SVG move" +msgstr "Di chuyển SVG" + +msgid "Enter SVG gizmo" +msgstr "Vào chế độ SVG gizmo" + +msgid "Leave SVG gizmo" +msgstr "Thoát chế độ SVG gizmo" + +msgid "SVG actions" +msgstr "Thao tác SVG" + +msgid "SVG" +msgstr "SVG" + +#, boost-format +msgid "Opacity (%1%)" +msgstr "Độ mờ (%1%)" + +#, boost-format +msgid "Color gradient (%1%)" +msgstr "Chuyển màu (%1%)" + +msgid "Undefined fill type" +msgstr "Loại tô không xác định" + +msgid "Linear gradient" +msgstr "Chuyển màu tuyến tính" + +msgid "Radial gradient" +msgstr "Chuyển màu hướng tâm" + +msgid "Open filled path" +msgstr "Đường nét tô hở" + +msgid "Undefined stroke type" +msgstr "Loại nét không xác định" + +msgid "Path can't be healed from self-intersection and multiple points." +msgstr "Đường nét không thể khắc phục tự giao và nhiều điểm trùng." + +msgid "" +"Final shape contains self-intersection or multiple points with same " +"coordinate." +msgstr "Hình dạng cuối cùng chứa tự giao hoặc nhiều điểm có cùng tọa độ." + +#, boost-format +msgid "Shape is marked as invisible (%1%)." +msgstr "Hình dạng được đánh dấu ẩn (%1%)." + +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. +#, boost-format +msgid "Fill of shape (%1%) contains unsupported: %2%." +msgstr "Tô của hình (%1%) chứa không hỗ trợ: %2%." + +#, boost-format +msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." +msgstr "Nét của hình (%1%) quá mỏng (độ rộng tối thiểu là %2% mm)." + +#, boost-format +msgid "Stroke of shape (%1%) contains unsupported: %2%." +msgstr "Nét của hình (%1%) chứa không hỗ trợ: %2%." + +msgid "Face the camera" +msgstr "Hướng về camera" + +#. TRN - Preview of filename after clear local filepath. +msgid "Unknown filename" +msgstr "Tên file không rõ" + +#, boost-format +msgid "SVG file path is \"%1%\"" +msgstr "Đường dẫn file SVG là \"%1%\"" + +msgid "Reload SVG file from disk." +msgstr "Tải lại file SVG từ ổ đĩa." + +msgid "Change file" +msgstr "Đổi file" + +#, fuzzy +msgid "Change to another SVG file." +msgstr "Đổi sang file .svg khác" + +msgid "Forget the file path" +msgstr "Quên đường dẫn file" + +msgid "" +"Do NOT save local path to 3MF file.\n" +"Also disables 'reload from disk' option." +msgstr "" +"KHÔNG lưu đường dẫn nội bộ vào file 3MF.\n" +"Cũng vô hiệu hóa tùy chọn 'tải lại từ ổ đĩa'." + +#. TRN: An menu option to convert the SVG into an unmodifiable model part. +msgid "Bake" +msgstr "Nướng" + +#. TRN: Tooltip for the menu item. +msgid "Bake into model as uneditable part" +msgstr "Nướng vào model như phần không chỉnh sửa được" + +msgid "Save as" +msgstr "Lưu thành" + +msgid "Save SVG file" +msgstr "Lưu file SVG" + +#, fuzzy +msgid "Save as SVG file." +msgstr "Lưu thành file '.svg'" + +msgid "Size in emboss direction." +msgstr "Kích thước theo hướng emboss." + +#. TRN: The placeholder contains a number. +#, boost-format +msgid "Scale also changes amount of curve samples (%1%)" +msgstr "Tỷ lệ cũng thay đổi số lượng mẫu đường cong (%1%)" + +msgid "Width of SVG." +msgstr "Độ rộng của SVG." + +msgid "Height of SVG." +msgstr "Chiều cao của SVG." + +msgid "Lock/unlock the aspect ratio of the SVG." +msgstr "Khóa/mở khóa tỷ lệ khung hình của SVG." + +msgid "Reset scale" +msgstr "Đặt lại tỷ lệ" + +msgid "Distance of the center of the SVG to the model surface." +msgstr "Khoảng cách từ tâm SVG đến bề mặt model." + +msgid "Reset distance" +msgstr "Đặt lại khoảng cách" + +msgid "Reset rotation" +msgstr "Đặt lại xoay" + +msgid "Lock/unlock rotation angle when dragging above the surface." +msgstr "Khóa/mở khóa góc xoay khi kéo trên bề mặt." + +msgid "Mirror vertically" +msgstr "Lật dọc" + +msgid "Mirror horizontally" +msgstr "Lật ngang" + +#. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). +msgid "Change SVG Type" +msgstr "Đổi loại SVG" + +#. TRN - Input label. Be short as possible +msgid "Mirror" +msgstr "Lật" + +msgid "Choose SVG file for emboss:" +msgstr "Chọn file SVG cho emboss:" + +#, boost-format +msgid "File does NOT exist (%1%)." +msgstr "File KHÔNG tồn tại (%1%)." + +#, boost-format +msgid "Filename has to end with \".svg\" but you selected %1%" +msgstr "Tên file phải kết thúc bằng \".svg\" nhưng bạn chọn %1%" + +#, boost-format +msgid "Nano SVG parser can't load from file (%1%)." +msgstr "Trình phân tích Nano SVG không thể tải từ file (%1%)." + +#, boost-format +msgid "SVG file does NOT contain a single path to be embossed (%1%)." +msgstr "File SVG KHÔNG chứa đường nét đơn để emboss (%1%)." + +msgid "No feature" +msgstr "Không có đặc trưng" + +msgid "Vertex" +msgstr "Đỉnh" + +msgid "Edge" +msgstr "Cạnh" + +msgid "Plane" +msgstr "Mặt phẳng" + +msgid "Point on edge" +msgstr "Điểm trên cạnh" + +msgid "Point on circle" +msgstr "Điểm trên đường tròn" + +msgid "Point on plane" +msgstr "Điểm trên mặt phẳng" + +msgid "Center of edge" +msgstr "Tâm cạnh" + +msgid "Center of circle" +msgstr "Tâm đường tròn" + +msgid "Select feature" +msgstr "Chọn đặc trưng" + +msgid "Select point" +msgstr "Chọn điểm" + +msgid "Delete" +msgstr "Xóa" + +msgid "Restart selection" +msgstr "Khởi động lại lựa chọn" + +msgid "Esc" +msgstr "Esc" + +msgid "Cancel a feature until exit" +msgstr "Hủy đặc trưng cho đến khi thoát" + +msgid "Measure" +msgstr "Đo" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "Vui lòng xác nhận tỷ lệ nổ = 1, và vui lòng chọn ít nhất một vật thể." + +msgid "Edit to scale" +msgstr "Chỉnh sửa để co giãn" + +msgctxt "Verb" +msgid "Scale all" +msgstr "Co giãn tất cả" + +msgid "None" +msgstr "Không" + +msgid "Diameter" +msgstr "Đường kính" + +msgid "Length" +msgstr "Độ dài" + +msgid "Selection" +msgstr "Lựa chọn" + +msgid " (Moving)" +msgstr " (Đang di chuyển)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"Chọn 2 mặt trên vật thể và \n" +" lắp ráp các vật thể với nhau." + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"Chọn 2 điểm hoặc đường tròn trên vật thể và \n" +" chỉ định khoảng cách giữa chúng." + +msgid "Face" +msgstr "Mặt" + +msgid " (Fixed)" +msgstr " (Cố định)" + +msgid "Point" +msgstr "Điểm" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"Đặc trưng 1 đã được đặt lại, \n" +"đặc trưng 2 đã trở thành đặc trưng 1" + +msgid "Warning: please select Plane's feature." +msgstr "Cảnh báo: vui lòng chọn đặc trưng mặt phẳng." + +msgid "Warning: please select Point's or Circle's feature." +msgstr "Cảnh báo: vui lòng chọn đặc trưng điểm hoặc đường tròn." + +msgid "Warning: please select two different meshes." +msgstr "Cảnh báo: vui lòng chọn hai mesh khác nhau." + +msgid "Copy to clipboard" +msgstr "Sao chép vào clipboard" + +msgid "Perpendicular distance" +msgstr "Khoảng cách vuông góc" + +msgid "Distance" +msgstr "Khoảng cách" + +msgid "Direct distance" +msgstr "Khoảng cách trực tiếp" + +msgid "Distance XYZ" +msgstr "Khoảng cách XYZ" + +msgid "Parallel" +msgstr "Song song" + +msgid "Center coincidence" +msgstr "Trùng tâm" + +msgid "Feature 1" +msgstr "Đặc trưng 1" + +msgid "Reverse rotation" +msgstr "Xoay ngược" + +msgid "Rotate around center:" +msgstr "Xoay quanh tâm:" + +msgid "Parallel distance:" +msgstr "Khoảng cách song song:" + +msgid "Flip by Face 2" +msgstr "Lật theo mặt 2" + +msgid "Notice" +msgstr "Thông báo" + +msgid "Undefined" +msgstr "Không xác định" + +#, boost-format +msgid "%1% was replaced with %2%" +msgstr "%1% đã được thay thế bằng %2%" + +msgid "The configuration may be generated by a newer version of Snapmaker Orca." +msgstr "Cấu hình có thể được tạo bởi phiên bản Snapmaker Orca mới hơn." + +msgid "Some values have been replaced. Please check them:" +msgstr "Một số giá trị đã được thay thế. Vui lòng kiểm tra chúng:" + +msgid "Process" +msgstr "Process" + +msgid "Filament" +msgstr "Filament" + +msgid "Machine" +msgstr "Máy" + +msgid "Configuration package was loaded, but some values were not recognized." +msgstr "Gói cấu hình đã được tải, nhưng một số giá trị không được nhận diện." + +#, boost-format +msgid "" +"Configuration file \"%1%\" was loaded, but some values were not recognized." +msgstr "" +"File cấu hình \"%1%\" đã được tải, nhưng một số giá trị không được nhận diện." + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "Dựa trên PrusaSlicer và BambuStudio" + +msgid "" +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " +"It will be appreciated if you report the issue to our team." +msgstr "" +"Snapmaker Orca sẽ thoát do hết bộ nhớ. Có thể là lỗi. Chúng tôi sẽ đánh giá cao " +"nếu bạn báo cáo vấn đề cho nhóm của chúng tôi." + +msgid "Fatal error" +msgstr "Lỗi nghiêm trọng" + +msgid "" +"Snapmaker Orca will terminate because of a localization error. It will be " +"appreciated if you report the specific scenario this issue happened." +msgstr "" +"Snapmaker Orca sẽ thoát do lỗi ngôn ngữ hóa. Chúng tôi sẽ đánh giá cao nếu bạn " +"báo cáo tình huống cụ thể khi vấn đề này xảy ra." + +msgid "Critical error" +msgstr "Lỗi nghiêm trọng" + +#, boost-format +msgid "Snapmaker Orca got an unhandled exception: %1%" +msgstr "Snapmaker Orca gặp ngoại lệ không xử lý được: %1%" + +msgid "Untitled" +msgstr "Không tiêu đề" + +msgid "Downloading Bambu Network Plug-in" +msgstr "Đang tải Bambu Network Plug-in" + +msgid "Login information expired. Please login again." +msgstr "Thông tin đăng nhập đã hết hạn. Vui lòng đăng nhập lại." + +msgid "Incorrect password" +msgstr "Mật khẩu không đúng" + +#, c-format, boost-format +msgid "Connect %s failed! [SN:%s, code=%s]" +msgstr "Kết nối %s thất bại! [SN:%s, code=%s]" + +msgid "" +"Snapmaker Orca requires the Microsoft WebView2 Runtime to operate certain " +"features.\n" +"Click Yes to install it now." +msgstr "" +"Snapmaker Orca yêu cầu Microsoft WebView2 Runtime để vận hành một số tính " +"năng.\n" +"Nhấn Yes để cài đặt ngay." + +msgid "WebView2 Runtime" +msgstr "WebView2 Runtime" + +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "Đường dẫn tài nguyên không tồn tại hoặc không phải thư mục: %s" + +#, c-format, boost-format +msgid "" +"%s\n" +"Do you want to continue?" +msgstr "" +"%s\n" +"Bạn có muốn tiếp tục?" + +msgid "Remember my choice" +msgstr "Ghi nhớ lựa chọn của tôi" + +msgid "Loading configuration" +msgstr "Đang tải cấu hình" + +#, c-format, boost-format +msgid "Click to download new version in default browser: %s" +msgstr "Nhấn để tải phiên bản mới trong trình duyệt mặc định: %s" + +msgid "The Snapmaker Orca needs an upgrade" +msgstr "Snapmaker Orca cần nâng cấp" + +msgid "This is the newest version." +msgstr "Đây là phiên bản mới nhất." + +msgid "Info" +msgstr "Thông tin" + +msgid "" +"The Snapmaker Orca configuration file may be corrupted and cannot be parsed.\n" +"Snapmaker Orca has attempted to recreate the configuration file.\n" +"Please note, application settings will be lost, but printer profiles will " +"not be affected." +msgstr "" +"File cấu hình Snapmaker Orca có thể bị hỏng và không thể phân tích.\n" +"Snapmaker Orca đã cố gắng tạo lại file cấu hình.\n" +"Lưu ý, cài đặt ứng dụng sẽ mất, nhưng hồ sơ máy in sẽ không bị ảnh hưởng." + +msgid "Rebuild" +msgstr "Xây dựng lại" + +msgid "Loading current presets" +msgstr "Đang tải preset hiện tại" + +msgid "Loading a mode view" +msgstr "Đang tải chế độ xem" + +msgid "Choose one file (3MF):" +msgstr "Chọn một file (3MF):" + +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "Chọn một hoặc nhiều file (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" + +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "Chọn một hoặc nhiều file (3MF/STEP/STL/SVG/OBJ/AMF):" + +msgid "Choose ZIP file" +msgstr "Chọn file ZIP" + +msgid "Choose one file (GCODE/3MF):" +msgstr "Chọn một file (GCODE/3MF):" + +msgid "Some presets are modified." +msgstr "Một số preset đã được sửa đổi." + +msgid "" +"You can keep the modified presets to the new project, discard or save " +"changes as new presets." +msgstr "" +"Bạn có thể giữ preset đã sửa cho dự án mới, hủy hoặc lưu thay đổi thành " +"preset mới." + +msgid "User logged out" +msgstr "Người dùng đã đăng xuất" + +msgid "new or open project file is not allowed during the slicing process!" +msgstr "không được tạo hoặc mở file dự án trong quá trình slice!" + +msgid "Open Project" +msgstr "Mở dự án" + +msgid "" +"The version of Snapmaker Orca is too low and needs to be updated to the latest " +"version before it can be used normally." +msgstr "" +"Phiên bản Snapmaker Orca quá cũ và cần được cập nhật lên phiên bản mới nhất " +"trước khi có thể sử dụng bình thường." + +msgid "Privacy Policy Update" +msgstr "Cập nhật chính sách bảo mật" + +msgid "" +"The number of user presets cached in the cloud has exceeded the upper limit, " +"newly created user presets can only be used locally." +msgstr "" +"Số lượng preset người dùng đã lưu trong cloud vượt quá giới hạn, preset " +"người dùng mới tạo chỉ có thể dùng nội bộ." + +msgid "Sync user presets" +msgstr "Đồng bộ preset người dùng" + +msgid "Loading user preset" +msgstr "Đang tải preset người dùng" + +msgid "Switching application language" +msgstr "Đang chuyển ngôn ngữ ứng dụng" + +msgid "Select the language" +msgstr "Chọn ngôn ngữ" + +msgid "Language" +msgstr "Ngôn ngữ" + +msgid "*" +msgstr "*" + +msgid "The uploads are still ongoing" +msgstr "Đang tiếp tục tải lên" + +msgid "Stop them and continue anyway?" +msgstr "Dừng chúng và tiếp tục?" + +msgid "Ongoing uploads" +msgstr "Đang tải lên" + +msgid "Select a G-code file:" +msgstr "Chọn file G-code:" + +msgid "" +"Could not start URL download. Destination folder is not set. Please choose " +"destination folder in Configuration Wizard." +msgstr "" +"Không thể bắt đầu tải URL. Thư mục đích chưa được đặt. Vui lòng chọn thư mục " +"đích trong Trình hướng dẫn cấu hình." + +msgid "Import File" +msgstr "Nhập file" + +msgid "Choose files" +msgstr "Chọn file" + +msgid "New Folder" +msgstr "Thư mục mới" + +msgid "Open" +msgstr "Mở" + +msgid "Rename" +msgstr "Đổi tên" + +msgid "Snapmaker Orca GUI initialization failed" +msgstr "Khởi tạo giao diện Snapmaker Orca thất bại" + +#, boost-format +msgid "Fatal error, exception caught: %1%" +msgstr "Lỗi nghiêm trọng, ngoại lệ bắt được: %1%" + +msgid "Quality" +msgstr "Chất lượng" + +msgid "Shell" +msgstr "Shell" + +msgid "Infill" +msgstr "Infill" + +msgid "Support" +msgstr "Support" + +msgid "Flush options" +msgstr "Tùy chọn flush" + +msgid "Speed" +msgstr "Tốc độ" + +msgid "Strength" +msgstr "Độ bền" + +msgid "Top Solid Layers" +msgstr "Lớp rắn trên" + +msgid "Top Minimum Shell Thickness" +msgstr "Độ dày shell tối thiểu trên" + +msgid "Top Surface Density" +msgstr "Mật độ bề mặt trên" + +msgid "Bottom Solid Layers" +msgstr "Lớp rắn dưới" + +msgid "Bottom Minimum Shell Thickness" +msgstr "Độ dày shell tối thiểu dưới" + +msgid "Bottom Surface Density" +msgstr "Mật độ bề mặt dưới" + +msgid "Ironing" +msgstr "Ironing" + +msgid "Fuzzy Skin" +msgstr "Fuzzy Skin" + +msgid "Extruders" +msgstr "Extruder" + +msgid "Extrusion Width" +msgstr "Độ rộng đùn" + +msgid "Wipe options" +msgstr "Tùy chọn wipe" + +msgid "Bed adhesion" +msgstr "Bám dính đế" + +msgid "Add part" +msgstr "Thêm phần" + +msgid "Add negative part" +msgstr "Thêm phần âm" + +msgid "Add modifier" +msgstr "Thêm modifier" + +msgid "Add support blocker" +msgstr "Thêm chặn support" + +msgid "Add support enforcer" +msgstr "Thêm bắt buộc support" + +msgid "Add text" +msgstr "Thêm chữ" + +msgid "Add negative text" +msgstr "Thêm chữ âm" + +msgid "Add text modifier" +msgstr "Thêm modifier chữ" + +msgid "Add SVG part" +msgstr "Thêm phần SVG" + +msgid "Add negative SVG" +msgstr "Thêm SVG âm" + +msgid "Add SVG modifier" +msgstr "Thêm modifier SVG" + +msgid "Select settings" +msgstr "Chọn cài đặt" + +msgid "Hide" +msgstr "Ẩn" + +msgid "Show" +msgstr "Hiện" + +msgid "Del" +msgstr "Del" + +msgid "Delete the selected object" +msgstr "Xóa vật thể đã chọn" + +msgid "Backspace" +msgstr "Backspace" + +msgid "Load..." +msgstr "Tải..." + +msgid "Cube" +msgstr "Khối lập phương" + +msgid "Cylinder" +msgstr "Hình trụ" + +msgid "Cone" +msgstr "Hình nón" + +msgid "Disc" +msgstr "Đĩa" + +msgid "Torus" +msgstr "Hình xuyến" + +msgid "Orca Cube" +msgstr "Orca Cube" + +msgid "Orca Tolerance Test" +msgstr "Orca Tolerance Test" + +msgid "3DBenchy" +msgstr "3DBenchy" + +msgid "Autodesk FDM Test" +msgstr "Autodesk FDM Test" + +msgid "Voron Cube" +msgstr "Voron Cube" + +msgid "Stanford Bunny" +msgstr "Stanford Bunny" + +msgid "Orca String Hell" +msgstr "Orca String Hell" + +msgid "" +"This model features text embossment on the top surface. For optimal results, " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " +"for the 'Only One Wall on Top Surfaces' to work best.\n" +"Yes - Change these settings automatically\n" +"No - Do not change these settings for me" +msgstr "" +"Model này có chữ emboss trên bề mặt trên. Để có kết quả tối ưu, nên đặt " +"'Ngưỡng một wall (min_width_top_surface)' thành 0 để 'Chỉ một wall trên bề " +"mặt trên' hoạt động tốt nhất.\n" +"Yes - Thay đổi các cài đặt này tự động\n" +"No - Không thay đổi các cài đặt này cho tôi" + +msgid "Text" +msgstr "Chữ" + +msgid "Height range Modifier" +msgstr "Modifier phạm vi chiều cao" + +msgid "Add settings" +msgstr "Thêm cài đặt" + +msgid "Change type" +msgstr "Đổi loại" + +msgid "Set as an individual object" +msgstr "Đặt làm vật thể riêng lẻ" + +msgid "Set as individual objects" +msgstr "Đặt làm các vật thể riêng lẻ" + +msgid "Fill bed with copies" +msgstr "Lấp đầy đế bằng bản sao" + +msgid "Fill the remaining area of bed with copies of the selected object" +msgstr "Lấp đầy vùng còn lại của đế bằng bản sao của vật thể đã chọn" + +msgid "Printable" +msgstr "Có thể in" + +msgid "Fix model" +msgstr "Sửa model" + +msgid "Export as one STL" +msgstr "Xuất thành một STL" + +msgid "Export as STLs" +msgstr "Xuất thành các STL" + +msgid "Reload from disk" +msgstr "Tải lại từ ổ đĩa" + +msgid "Reload the selected parts from disk" +msgstr "Tải lại các phần đã chọn từ ổ đĩa" + +msgid "Replace with STL" +msgstr "Thay thế bằng STL" + +msgid "Replace the selected part with new STL" +msgstr "Thay thế phần đã chọn bằng STL mới" + +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + +msgid "Change filament" +msgstr "Đổi filament" + +msgid "Set filament for selected items" +msgstr "Đặt filament cho các mục đã chọn" + +msgid "Default" +msgstr "Mặc định" + +#, c-format, boost-format +msgid "Filament %d" +msgstr "Filament %d" + +msgid "current" +msgstr "hiện tại" + +msgid "Scale to build volume" +msgstr "Co giãn vừa thể tích in" + +msgid "Scale an object to fit the build volume" +msgstr "Co giãn vật thể để vừa thể tích in" + +msgid "Flush Options" +msgstr "Tùy chọn flush" + +msgid "Flush into objects' infill" +msgstr "Flush vào infill của vật thể" + +msgid "Flush into this object" +msgstr "Flush vào vật thể này" + +msgid "Flush into objects' support" +msgstr "Flush vào support của vật thể" + +msgid "Edit in Parameter Table" +msgstr "Chỉnh sửa trong bảng tham số" + +msgid "Convert from inches" +msgstr "Chuyển đổi từ inch" + +msgid "Restore to inches" +msgstr "Khôi phục về inch" + +msgid "Convert from meters" +msgstr "Chuyển đổi từ mét" + +msgid "Restore to meters" +msgstr "Khôi phục về mét" + +msgid "Assemble" +msgstr "Lắp ráp" + +msgid "Assemble the selected objects to an object with multiple parts" +msgstr "Lắp ráp các vật thể đã chọn thành vật thể có nhiều phần" + +msgid "Assemble the selected objects to an object with single part" +msgstr "Lắp ráp các vật thể đã chọn thành vật thể có một phần" + +msgid "Mesh boolean" +msgstr "Mesh boolean" + +msgid "Mesh boolean operations including union and subtraction" +msgstr "Các thao tác mesh boolean bao gồm hợp và trừ" + +msgid "Along X axis" +msgstr "Dọc trục X" + +msgid "Mirror along the X axis" +msgstr "Lật dọc trục X" + +msgid "Along Y axis" +msgstr "Dọc trục Y" + +msgid "Mirror along the Y axis" +msgstr "Lật dọc trục Y" + +msgid "Along Z axis" +msgstr "Dọc trục Z" + +msgid "Mirror along the Z axis" +msgstr "Lật dọc trục Z" + +msgid "Mirror object" +msgstr "Lật vật thể" + +msgid "Edit text" +msgstr "Chỉnh sửa chữ" + +msgid "Ability to change text, font, size, ..." +msgstr "Khả năng thay đổi chữ, font, kích thước, ..." + +msgid "Edit SVG" +msgstr "Chỉnh sửa SVG" + +msgid "Change SVG source file, projection, size, ..." +msgstr "Thay đổi file nguồn SVG, phép chiếu, kích thước, ..." + +msgid "Invalidate cut info" +msgstr "Vô hiệu hóa thông tin cắt" + +msgid "Add Primitive" +msgstr "Thêm hình nguyên thủy" + +msgid "Add Handy models" +msgstr "Thêm model tiện dụng" + +msgid "Add Models" +msgstr "Thêm model" + +msgid "Show Labels" +msgstr "Hiện nhãn" + +msgid "To objects" +msgstr "Thành vật thể" + +msgid "Split the selected object into multiple objects" +msgstr "Tách vật thể đã chọn thành nhiều vật thể" + +msgid "To parts" +msgstr "Thành phần" + +msgid "Split the selected object into multiple parts" +msgstr "Tách vật thể đã chọn thành nhiều phần" + +msgid "Split" +msgstr "Tách" + +msgid "Split the selected object" +msgstr "Tách vật thể đã chọn" + +msgid "Auto orientation" +msgstr "Tự động định hướng" + +msgid "Auto orient the object to improve print quality" +msgstr "Tự động định hướng vật thể để cải thiện chất lượng in." + +msgid "Edit" +msgstr "Chỉnh sửa" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + +msgid "Select All" +msgstr "Chọn tất cả" + +msgid "select all objects on current plate" +msgstr "chọn tất cả vật thể trên plate hiện tại" + +msgid "Delete All" +msgstr "Xóa tất cả" + +msgid "delete all objects on current plate" +msgstr "xóa tất cả vật thể trên plate hiện tại" + +msgid "Arrange" +msgstr "Sắp xếp" + +msgid "arrange current plate" +msgstr "sắp xếp plate hiện tại" + +msgid "Reload All" +msgstr "Tải lại tất cả" + +msgid "reload all from disk" +msgstr "tải lại tất cả từ ổ đĩa" + +msgid "Auto Rotate" +msgstr "Tự động xoay" + +msgid "auto rotate current plate" +msgstr "tự động xoay plate hiện tại" + +msgid "Delete Plate" +msgstr "Xóa plate" + +msgid "Remove the selected plate" +msgstr "Xóa plate đã chọn" + +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + +msgid "Clone" +msgstr "Nhân bản" + +msgid "Simplify Model" +msgstr "Đơn giản hóa model" + +msgid "Center" +msgstr "Căn giữa" + +msgid "Drop" +msgstr "Thả xuống" + +msgid "Edit Process Settings" +msgstr "Chỉnh sửa cài đặt process" + +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + +msgid "Edit print parameters for a single object" +msgstr "Chỉnh sửa tham số in cho một vật thể" + +msgid "Change Filament" +msgstr "Đổi filament" + +msgid "Set Filament for selected items" +msgstr "Đặt filament cho các mục đã chọn" + +msgid "Unlock" +msgstr "Mở khóa" + +msgid "Lock" +msgstr "Khóa" + +msgid "Edit Plate Name" +msgstr "Chỉnh sửa tên plate" + +msgid "Name" +msgstr "Tên" + +msgid "Fila." +msgstr "Fila." + +#, c-format, boost-format +msgid "%1$d error repaired" +msgid_plural "%1$d errors repaired" +msgstr[0] "Đã sửa %1$d lỗi" + +#, c-format, boost-format +msgid "Error: %1$d non-manifold edge." +msgid_plural "Error: %1$d non-manifold edges." +msgstr[0] "Lỗi: %1$d cạnh non-manifold." + +msgid "Remaining errors" +msgstr "Lỗi còn lại" + +#, c-format, boost-format +msgid "%1$d non-manifold edge" +msgid_plural "%1$d non-manifold edges" +msgstr[0] "%1$d cạnh non-manifold" + +msgid "Click the icon to repair model object" +msgstr "Nhấn biểu tượng để sửa vật thể model" + +msgid "Right button click the icon to drop the object settings" +msgstr "Nhấn chuột phải vào biểu tượng để hủy cài đặt vật thể" + +msgid "Click the icon to reset all settings of the object" +msgstr "Nhấn biểu tượng để đặt lại tất cả cài đặt của vật thể" + +msgid "Right button click the icon to drop the object printable property" +msgstr "Nhấn chuột phải vào biểu tượng để hủy thuộc tính có thể in của vật thể" + +msgid "Click the icon to toggle printable property of the object" +msgstr "Nhấn biểu tượng để bật/tắt thuộc tính có thể in của vật thể" + +msgid "Click the icon to edit support painting of the object" +msgstr "Nhấn biểu tượng để chỉnh sửa vẽ support của vật thể" + +msgid "Click the icon to edit color painting of the object" +msgstr "Nhấn biểu tượng để chỉnh sửa vẽ màu của vật thể" + +msgid "Click the icon to shift this object to the bed" +msgstr "Nhấn biểu tượng để đưa vật thể này xuống đế" + +msgid "Loading file" +msgstr "Đang tải file" + +msgid "Error!" +msgstr "Lỗi!" + +msgid "Failed to get the model data in the current file." +msgstr "Không thể lấy dữ liệu model trong file hiện tại." + +msgid "Generic" +msgstr "Chung" + +msgid "Add Modifier" +msgstr "Thêm modifier" + +msgid "Switch to per-object setting mode to edit modifier settings." +msgstr "Chuyển sang chế độ cài đặt từng vật thể để chỉnh sửa cài đặt modifier." + +msgid "" +"Switch to per-object setting mode to edit process settings of selected " +"objects." +msgstr "" +"Chuyển sang chế độ cài đặt từng vật thể để chỉnh sửa cài đặt process của các " +"vật thể đã chọn." + +msgid "Remove paint-on fuzzy skin" +msgstr "Xóa fuzzy skin vẽ" + +msgid "Delete connector from object which is a part of cut" +msgstr "Xóa connector khỏi vật thể là một phần của cắt" + +msgid "Delete solid part from object which is a part of cut" +msgstr "Xóa phần rắn khỏi vật thể là một phần của cắt" + +msgid "Delete negative volume from object which is a part of cut" +msgstr "Xóa thể tích âm khỏi vật thể là một phần của cắt" + +msgid "" +"To save cut correspondence you can delete all connectors from all related " +"objects." +msgstr "" +"Để lưu sự tương ứng cắt, bạn có thể xóa tất cả connector từ tất cả vật thể " +"liên quan." + +msgid "" +"This action will break a cut correspondence.\n" +"After that model consistency can't be guaranteed.\n" +"\n" +"To manipulate with solid parts or negative volumes you have to invalidate " +"cut information first." +msgstr "" +"Thao tác này sẽ phá vỡ sự tương ứng cắt.\n" +"Sau đó tính nhất quán của model không thể đảm bảo.\n" +"\n" +"Để thao tác với các phần rắn hoặc thể tích âm, bạn phải vô hiệu hóa thông " +"tin cắt trước." + +msgid "Delete all connectors" +msgstr "Xóa tất cả connector" + +msgid "Deleting the last solid part is not allowed." +msgstr "Không được phép xóa phần rắn cuối cùng." + +msgid "The target object contains only one part and can not be split." +msgstr "Vật thể đích chỉ chứa một phần và không thể tách." + +msgid "Assembly" +msgstr "Lắp ráp" + +msgid "Cut Connectors information" +msgstr "Thông tin connector cắt" + +msgid "Object manipulation" +msgstr "Thao tác vật thể" + +msgid "Group manipulation" +msgstr "Thao tác nhóm" + +msgid "Object Settings to modify" +msgstr "Cài đặt vật thể để sửa đổi" + +msgid "Part Settings to modify" +msgstr "Cài đặt phần để sửa đổi" + +msgid "Layer range Settings to modify" +msgstr "Cài đặt phạm vi lớp để sửa đổi" + +msgid "Part manipulation" +msgstr "Thao tác phần" + +msgid "Instance manipulation" +msgstr "Thao tác instance" + +msgid "Height ranges" +msgstr "Phạm vi chiều cao" + +msgid "Settings for height range" +msgstr "Cài đặt cho phạm vi chiều cao" + +msgid "Layer" +msgstr "Lớp" + +msgid "Selection conflicts" +msgstr "Xung đột lựa chọn" + +msgid "" +"If the first selected item is an object, the second should also be an object." +msgstr "" +"Nếu mục đầu tiên được chọn là vật thể, mục thứ hai cũng phải là vật thể." + +msgid "" +"If the first selected item is a part, the second should be a part in the " +"same object." +msgstr "" +"Nếu mục đầu tiên được chọn là phần, mục thứ hai phải là phần trong cùng vật " +"thể." + +msgid "The type of the last solid object part is not to be changed." +msgstr "Loại của phần vật thể rắn cuối cùng không được thay đổi." + +msgid "Negative Part" +msgstr "Phần âm" + +msgid "Support Blocker" +msgstr "Chặn support" + +msgid "Support Enforcer" +msgstr "Bắt buộc support" + +msgid "Type:" +msgstr "Loại:" + +msgid "Choose part type" +msgstr "Chọn loại phần" + +msgid "Enter new name" +msgstr "Nhập tên mới" + +msgid "Renaming" +msgstr "Đang đổi tên" + +msgid "Following model object has been repaired" +msgid_plural "Following model objects have been repaired" +msgstr[0] "Vật thể model sau đã được sửa" + +msgid "Failed to repair following model object" +msgid_plural "Failed to repair following model objects" +msgstr[0] "Không thể sửa vật thể model sau" + +msgid "Repairing was canceled" +msgstr "Đã hủy sửa chữa" + +msgid "Additional process preset" +msgstr "Preset process bổ sung" + +msgid "Remove parameter" +msgstr "Xóa tham số" + +msgid "to" +msgstr "đến" + +msgid "Remove height range" +msgstr "Xóa phạm vi chiều cao" + +msgid "Add height range" +msgstr "Thêm phạm vi chiều cao" + +msgid "Invalid numeric." +msgstr "Số không hợp lệ." + +msgid "one cell can only be copied to one or multiple cells in the same column" +msgstr "một ô chỉ có thể sao chép vào một hoặc nhiều ô trong cùng cột" + +msgid "Copying multiple cells is not supported." +msgstr "Không hỗ trợ sao chép nhiều ô." + +msgid "Outside" +msgstr "Bên ngoài" + +msgid "Layer height" +msgstr "Chiều cao lớp" + +msgid "Wall loops" +msgstr "Vòng wall" + +msgid "Infill density(%)" +msgstr "Mật độ infill(%)" + +msgid "Auto Brim" +msgstr "Tự động brim" + +msgid "Mouse ear" +msgstr "Tai chuột" + +msgid "Painted" +msgstr "Đã vẽ" + +msgid "Outer brim only" +msgstr "Chỉ brim ngoài" + +msgid "Inner brim only" +msgstr "Chỉ brim trong" + +msgid "Outer and inner brim" +msgstr "Brim ngoài và trong" + +msgid "No-brim" +msgstr "Không brim" + +msgid "Outer wall speed" +msgstr "Tốc độ wall ngoài" + +msgid "Plate" +msgstr "Plate" + +msgid "Brim" +msgstr "Brim" + +msgid "Object/Part Setting" +msgstr "Cài đặt vật thể/phần" + +msgid "Reset parameter" +msgstr "Đặt lại tham số" + +msgid "Multicolor Print" +msgstr "In nhiều màu" + +msgid "Line Type" +msgstr "Loại đường" + +msgid "More" +msgstr "Thêm" + +msgid "Open Preferences." +msgstr "Mở tùy chọn." + +msgid "Open next tip." +msgstr "Mở mẹo tiếp theo." + +msgid "Open Documentation in web browser." +msgstr "Mở tài liệu trong trình duyệt web." + +msgid "Color" +msgstr "Màu" + +msgid "Pause" +msgstr "Tạm dừng" + +msgid "Template" +msgstr "Mẫu" + +msgid "Custom" +msgstr "Tùy chỉnh" + +msgid "Pause:" +msgstr "Tạm dừng:" + +msgid "Custom Template:" +msgstr "Mẫu tùy chỉnh:" + +msgid "Custom G-code:" +msgstr "G-code tùy chỉnh:" + +msgid "Custom G-code" +msgstr "G-code tùy chỉnh" + +msgid "Enter Custom G-code used on current layer:" +msgstr "Nhập G-code tùy chỉnh dùng trên lớp hiện tại:" + +msgid "Jump to Layer" +msgstr "Nhảy đến lớp" + +msgid "Please enter the layer number" +msgstr "Vui lòng nhập số lớp" + +msgid "Add Pause" +msgstr "Thêm tạm dừng" + +msgid "Insert a pause command at the beginning of this layer." +msgstr "Chèn lệnh tạm dừng ở đầu lớp này." + +msgid "Add Custom G-code" +msgstr "Thêm G-code tùy chỉnh" + +msgid "Insert custom G-code at the beginning of this layer." +msgstr "Chèn G-code tùy chỉnh ở đầu lớp này." + +msgid "Add Custom Template" +msgstr "Thêm mẫu tùy chỉnh" + +msgid "Insert template custom G-code at the beginning of this layer." +msgstr "Chèn mẫu G-code tùy chỉnh ở đầu lớp này." + +msgid "Filament " +msgstr "Filament " + +msgid "Change filament at the beginning of this layer." +msgstr "Đổi filament ở đầu lớp này." + +msgid "Delete Pause" +msgstr "Xóa tạm dừng" + +msgid "Delete Custom Template" +msgstr "Xóa mẫu tùy chỉnh" + +msgid "Edit Custom G-code" +msgstr "Chỉnh sửa G-code tùy chỉnh" + +msgid "Delete Custom G-code" +msgstr "Xóa G-code tùy chỉnh" + +msgid "Delete Filament Change" +msgstr "Xóa đổi filament" + +msgid "No printer" +msgstr "Không có máy in" + +msgid "..." +msgstr "..." + +msgid "Failed to connect to the server" +msgstr "Không thể kết nối đến server" + +msgid "Check the status of current system services" +msgstr "Kiểm tra trạng thái của các dịch vụ hệ thống hiện tại" + +msgid "code" +msgstr "mã" + +msgid "Failed to connect to cloud service" +msgstr "Không thể kết nối đến dịch vụ cloud" + +msgid "Please click on the hyperlink above to view the cloud service status" +msgstr "Vui lòng nhấn vào liên kết phía trên để xem trạng thái dịch vụ cloud" + +msgid "Failed to connect to the printer" +msgstr "Không thể kết nối đến máy in" + +msgid "Connection to printer failed" +msgstr "Kết nối đến máy in thất bại" + +msgid "Please check the network connection of the printer and Orca." +msgstr "Vui lòng kiểm tra kết nối mạng của máy in và Orca." + +msgid "Connecting..." +msgstr "Đang kết nối..." + +msgid "Auto-refill" +msgstr "" + +msgid "Load" +msgstr "Nạp" + +msgid "Unload" +msgstr "Tháo" + +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "" +"Chọn một khe AMS rồi nhấn nút \"Nạp\" hoặc \"Tháo\" để tự động nạp hoặc tháo " +"filament." + +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" + +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" + +msgid "Change Anyway" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Filter" +msgstr "Lọc" + +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" + +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "Làm mát" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "Trên" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "Phụ" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" + +msgid "Idling..." +msgstr "Đang rảnh..." + +msgid "Heat the nozzle" +msgstr "Nung nóng vòi phun" + +msgid "Cut filament" +msgstr "Cắt filament" + +msgid "Pull back current filament" +msgstr "Kéo filament hiện tại ra" + +msgid "Push new filament into extruder" +msgstr "Đẩy filament mới vào extruder" + +msgid "Grab new filament" +msgstr "Lấy filament mới" + +msgid "Purge old filament" +msgstr "Xả filament cũ" + +msgid "Confirm extruded" +msgstr "Xác nhận đã đùn" + +msgid "Check filament location" +msgstr "Kiểm tra vị trí filament" + +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." +msgstr "" +"Tất cả vật thể đã chọn đang ở trên plate bị khóa.\n" +"Không thể tự động sắp xếp các vật thể này." + +msgid "No arrangeable objects are selected." +msgstr "Không có vật thể có thể sắp xếp được chọn." + +msgid "" +"This plate is locked.\n" +"Cannot auto-arrange on this plate." +msgstr "" +"Plate này bị khóa.\n" +"Không thể tự động sắp xếp trên plate này." + +msgid "Arranging..." +msgstr "Đang sắp xếp..." + +msgid "Arranging" +msgstr "Đang sắp xếp" + +msgid "Arranging canceled." +msgstr "Hủy sắp xếp." + +msgid "" +"Arranging is done but there are unpacked items. Reduce spacing and try again." +msgstr "" +"Sắp xếp hoàn tất nhưng có vật chưa đóng gói. Giảm khoảng cách và thử lại." + +msgid "Arranging done." +msgstr "Sắp xếp hoàn tất." + +msgid "" +"Arrange failed. Found some exceptions when processing object geometries." +msgstr "Sắp xếp thất bại. Tìm thấy một số ngoại lệ khi xử lý hình học vật thể." + +#, c-format, boost-format +msgid "" +"Arrangement ignored the following objects which can't fit into a single " +"bed:\n" +"%s" +msgstr "" +"Sắp xếp bỏ qua các vật thể sau không vừa một đế in:\n" +"%s" + +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." +msgstr "" +"Tất cả vật thể đã chọn đang ở trên plate bị khóa.\n" +"Không thể tự động xoay các vật thể này." + +msgid "" +"This plate is locked.\n" +"Cannot auto-orient on this plate." +msgstr "" +"Plate này bị khóa.\n" +"Không thể tự động xoay trên plate này." + +msgid "Orienting..." +msgstr "Đang xoay..." + +msgid "Orienting" +msgstr "Đang xoay" + +msgid "Orienting canceled." +msgstr "Hủy xoay." + +msgid "Filling" +msgstr "Đang lấp đầy" + +msgid "Bed filling canceled." +msgstr "Hủy lấp đầy đế." + +msgid "Bed filling done." +msgstr "Lấp đầy đế hoàn tất." + +msgid "Searching for optimal orientation" +msgstr "Đang tìm định hướng tối ưu" + +msgid "Orientation search canceled." +msgstr "Hủy tìm định hướng." + +msgid "Orientation found." +msgstr "Đã tìm thấy định hướng." + +msgid "Logging in" +msgstr "Đang đăng nhập" + +msgid "Login failed" +msgstr "Đăng nhập thất bại" + +msgid "Please check the printer network connection." +msgstr "Vui lòng kiểm tra kết nối mạng của máy in." + +msgid "Abnormal print file data. Please slice again." +msgstr "Dữ liệu file in bất thường. Vui lòng slice lại." + +msgid "Task canceled." +msgstr "Hủy tác vụ." + +msgid "Upload task timed out. Please check the network status and try again." +msgstr "" +"Tác vụ tải lên hết thời gian. Vui lòng kiểm tra trạng thái mạng và thử lại." + +msgid "Cloud service connection failed. Please try again." +msgstr "Kết nối dịch vụ cloud thất bại. Vui lòng thử lại." + +msgid "Print file not found. Please slice again." +msgstr "Không tìm thấy file in. Vui lòng slice lại." + +msgid "" +"The print file exceeds the maximum allowable size (1GB). Please simplify the " +"model and slice again." +msgstr "" +"File in vượt quá kích thước cho phép tối đa (1GB). Vui lòng đơn giản hóa " +"model và slice lại." + +msgid "Failed to send the print job. Please try again." +msgstr "Gửi công việc in thất bại. Vui lòng thử lại." + +msgid "Failed to upload file to ftp. Please try again." +msgstr "Tải file lên ftp thất bại. Vui lòng thử lại." + +msgid "" +"Check the current status of the bambu server by clicking on the link above." +msgstr "" +"Kiểm tra trạng thái hiện tại của bambu server bằng cách nhấn vào link ở trên." + +msgid "" +"The size of the print file is too large. Please adjust the file size and try " +"again." +msgstr "" +"Kích thước file in quá lớn. Vui lòng điều chỉnh kích thước file và thử lại." + +msgid "Print file not found, please slice it again and send it for printing." +msgstr "Không tìm thấy file in, vui lòng slice lại và gửi để in." + +msgid "" +"Failed to upload print file to FTP. Please check the network status and try " +"again." +msgstr "" +"Tải file in lên FTP thất bại. Vui lòng kiểm tra trạng thái mạng và thử lại." + +msgid "Sending print job over LAN" +msgstr "Đang gửi công việc in qua LAN" + +msgid "Sending print job through cloud service" +msgstr "Đang gửi công việc in qua dịch vụ cloud" + +msgid "Print task sending times out." +msgstr "Gửi tác vụ in hết thời gian." + +msgid "Service Unavailable" +msgstr "Dịch vụ không khả dụng" + +msgid "Unknown Error." +msgstr "Lỗi không xác định." + +msgid "Sending print configuration" +msgstr "Đang gửi cấu hình in" + +#, c-format, boost-format +msgid "Successfully sent. Will automatically jump to the device page in %ss" +msgstr "Gửi thành công. Sẽ tự động chuyển đến trang thiết bị trong %ss" + +#, c-format, boost-format +msgid "Successfully sent. Will automatically jump to the next page in %ss" +msgstr "Gửi thành công. Sẽ tự động chuyển đến trang tiếp theo trong %ss" + +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "Mã truy cập:%s Địa chỉ IP:%s" + +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "Đang gửi file G-code qua LAN" + +msgid "Sending G-code file to SD card" +msgstr "Đang gửi file G-code đến thẻ SD" + +#, c-format, boost-format +msgid "Successfully sent. Close current page in %s s" +msgstr "Gửi thành công. Đóng trang hiện tại trong %s s" + +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "Importing SLA archive" +msgstr "Đang nhập lưu trữ SLA" + +msgid "" +"The SLA archive doesn't contain any presets. Please activate some SLA " +"printer preset first before importing that SLA archive." +msgstr "" +"Lưu trữ SLA không chứa preset nào. Vui lòng kích hoạt một số preset máy in " +"SLA trước khi nhập lưu trữ SLA đó." + +msgid "Importing canceled." +msgstr "Hủy nhập." + +msgid "Importing done." +msgstr "Nhập hoàn tất." + +msgid "" +"The imported SLA archive did not contain any presets. The current SLA " +"presets were used as fallback." +msgstr "" +"Lưu trữ SLA đã nhập không chứa preset nào. Preset SLA hiện tại được dùng làm " +"dự phòng." + +msgid "You cannot load SLA project with a multi-part object on the bed" +msgstr "Bạn không thể tải dự án SLA với vật thể nhiều phần trên đế" + +msgid "Please check your object list before preset changing." +msgstr "Vui lòng kiểm tra danh sách vật thể trước khi đổi preset." + +msgid "Attention!" +msgstr "Chú ý!" + +msgid "Downloading" +msgstr "Đang tải xuống" + +msgid "Download failed" +msgstr "Tải xuống thất bại" + +msgid "Canceled" +msgstr "Đã hủy" + +msgid "Installed successfully" +msgstr "Cài đặt thành công" + +msgid "Installing" +msgstr "Đang cài đặt" + +msgid "Install failed" +msgstr "Cài đặt thất bại" + +msgid "Portions copyright" +msgstr "Bản quyền một phần" + +msgid "Copyright" +msgstr "Bản quyền" + +msgid "License" +msgstr "Giấy phép" + +msgid "Snapmaker Orca is licensed under " +msgstr "Snapmaker Orca được cấp phép theo " + +msgid "GNU Affero General Public License, version 3" +msgstr "GNU Affero General Public License, phiên bản 3" + +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca dựa trên PrusaSlicer và BambuStudio" + +msgid "Libraries" +msgstr "Thư viện" + +msgid "" +"This software uses open source components whose copyright and other " +"proprietary rights belong to their respective owners" +msgstr "" +"Phần mềm này sử dụng các thành phần nguồn mở có bản quyền và các quyền sở " +"hữu khác thuộc về chủ sở hữu tương ứng của chúng" + +#, c-format, boost-format +msgid "About %s" +msgstr "Giới thiệu %s" + +msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." +msgstr "Snapmaker Orca dựa trên BambuStudio, PrusaSlicer, và SuperSlicer." + +msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." +msgstr "BambuStudio ban đầu dựa trên PrusaSlicer của PrusaResearch." + +msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." +msgstr "PrusaSlicer ban đầu dựa trên Slic3r của Alessandro Ranellucci." + +msgid "" +"Slic3r was created by Alessandro Ranellucci with the help of many other " +"contributors." +msgstr "" +"Slic3r được tạo ra bởi Alessandro Ranellucci với sự trợ giúp của nhiều người " +"đóng góp khác." + +msgid "Version" +msgstr "Phiên bản" + +msgid "AMS Materials Setting" +msgstr "Cài đặt vật liệu AMS" + +msgid "Confirm" +msgstr "Xác nhận" + +msgid "Close" +msgstr "Đóng" + +msgid "" +"Nozzle\n" +"Temperature" +msgstr "" +"Nhiệt độ\n" +"vòi phun" + +msgid "max" +msgstr "tối đa" + +msgid "min" +msgstr "tối thiểu" + +#, boost-format +msgid "The input value should be greater than %1% and less than %2%" +msgstr "Giá trị nhập vào phải lớn hơn %1% và nhỏ hơn %2%" + +msgid "SN" +msgstr "SN" + +msgid "Factors of Flow Dynamics Calibration" +msgstr "Các hệ số của hiệu chỉnh flow động" + +msgid "PA Profile" +msgstr "PA Profile" + +msgid "Factor K" +msgstr "Hệ số K" + +msgid "Factor N" +msgstr "Hệ số N" + +msgid "Setting AMS slot information while printing is not supported" +msgstr "Không hỗ trợ đặt thông tin khe AMS trong khi in" + +msgid "Setting Virtual slot information while printing is not supported" +msgstr "Không hỗ trợ đặt thông tin khe ảo trong khi in" + +msgid "Are you sure you want to clear the filament information?" +msgstr "Bạn có chắc muốn xóa thông tin filament?" + +msgid "You need to select the material type and color first." +msgstr "Bạn cần chọn loại vật liệu và màu trước." + +#, c-format, boost-format +msgid "Please input a valid value (K in %.1f~%.1f)" +msgstr "Vui lòng nhập giá trị hợp lệ (K trong %.1f~%.1f)" + +#, c-format, boost-format +msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" +msgstr "Vui lòng nhập giá trị hợp lệ (K trong %.1f~%.1f, N trong %.1f~%.1f)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + +msgid "Other Color" +msgstr "Màu khác" + +msgid "Custom Color" +msgstr "Màu tùy chỉnh" + +msgid "Dynamic flow calibration" +msgstr "Hiệu chỉnh flow động" + +msgid "" +"The nozzle temp and max volumetric speed will affect the calibration " +"results. Please fill in the same values as the actual printing. They can be " +"auto-filled by selecting a filament preset." +msgstr "" +"Nhiệt độ vòi phun và tốc độ thể tích tối đa sẽ ảnh hưởng đến kết quả hiệu " +"chỉnh . Vui lòng điền các giá trị giống như in thực tế. Chúng có thể được tự " +"động điền bằng cách chọn preset filament." + +msgid "Nozzle Diameter" +msgstr "Đường kính vòi phun" + +msgid "Bed Type" +msgstr "Loại đế" + +msgid "Nozzle temperature" +msgstr "Nhiệt độ vòi phun" + +msgid "Bed Temperature" +msgstr "Nhiệt độ đế" + +msgid "Max volumetric speed" +msgstr "Tốc độ thể tích tối đa" + +msgid "Bed temperature" +msgstr "Nhiệt độ đế" + +msgid "Start calibration" +msgstr "Bắt đầu hiệu chỉnh" + +msgid "Next" +msgstr "Tiếp theo" + +msgid "" +"Calibration completed. Please find the most uniform extrusion line on your " +"hot bed like the picture below, and fill the value on its left side into the " +"factor K input box." +msgstr "" +"Hiệu chỉnh hoàn tất. Vui lòng tìm đường đùn đồng đều nhất trên đế nóng của " +"bạn như hình bên dưới, và điền giá trị ở bên trái của nó vào hộp nhập hệ số " +"K." + +msgid "Save" +msgstr "Lưu" + +msgid "Last Step" +msgstr "Bước trước" + +msgid "Example" +msgstr "Ví dụ" + +#, c-format, boost-format +msgid "Calibrating... %d%%" +msgstr "Đang hiệu chỉnh... %d%%" + +msgid "Calibration completed" +msgstr "Hiệu chỉnh hoàn tất" + +#, c-format, boost-format +msgid "%s does not support %s" +msgstr "%s không hỗ trợ %s" + +msgid "Dynamic flow Calibration" +msgstr "Hiệu chỉnh flow động" + +msgid "Step" +msgstr "Bước" + +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + +msgid "AMS Slots" +msgstr "Khe AMS" + +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "AMS trái" + +msgid "External" +msgstr "Bên ngoài" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "AMS phải" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "Đầu phun" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" + +msgid "Enable AMS" +msgstr "Bật AMS" + +msgid "Print with filaments in the AMS" +msgstr "In với filament trong AMS" + +msgid "Disable AMS" +msgstr "Tắt AMS" + +msgid "Print with the filament mounted on the back of chassis" +msgstr "In với filament gắn ở mặt sau khung" + +msgid "" +"Please change the desiccant when it is too wet. The indicator may not " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " +"temperatures also slow down the process." +msgstr "" +"Vui lòng thay chất hút ẩm khi nó quá ướt. Chỉ báo có thể không biểu thị " +"chính xác trong các trường hợp sau: khi nắp mở hoặc gói chất hút ẩm được " +"thay. Phải mất hàng giờ để hấp thụ độ ẩm, và nhiệt độ thấp cũng làm chậm quá " +"trình." + +msgid "" +"Configure which AMS slot should be used for a filament used in the print job." +msgstr "" +"Cấu hình khe AMS nào nên được dùng cho filament được sử dụng trong công việc " +"in." + +msgid "Filament used in this print job" +msgstr "Filament dùng trong công việc in này" + +msgid "AMS slot used for this filament" +msgstr "Khe AMS dùng cho filament này" + +msgid "Click to select AMS slot manually" +msgstr "Nhấn để chọn khe AMS thủ công" + +msgid "Do not Enable AMS" +msgstr "Không bật AMS" + +msgid "Print using materials mounted on the back of the case" +msgstr "In bằng vật liệu gắn ở mặt sau của vỏ" + +msgid "Print with filaments in AMS" +msgstr "In với filament trong AMS" + +msgid "Print with filaments mounted on the back of the chassis" +msgstr "In với filament gắn ở mặt sau khung" + +msgid "Auto Refill" +msgstr "Tự động cấp lại" + +msgid "Left" +msgstr "Trái" + +msgid "Right" +msgstr "Phải" + +msgid "" +"When the current material run out, the printer will continue to print in the " +"following order." +msgstr "Khi vật liệu hiện tại hết, máy in sẽ tiếp tục in theo thứ tự sau." + +msgid "Identical filament: same brand, type and color" +msgstr "" + +msgid "Group" +msgstr "Nhóm" + +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + +msgid "The printer does not currently support auto refill." +msgstr "Máy in hiện không hỗ trợ tự động cấp lại." + +msgid "" +"AMS filament backup is not enabled, please enable it in the AMS settings." +msgstr "Sao lưu filament AMS chưa được bật, vui lòng bật nó trong cài đặt AMS." + +msgid "" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." +msgstr "" + +msgid "DRY" +msgstr "KHÔ" + +msgid "WET" +msgstr "ƯỚT" + +msgid "AMS Settings" +msgstr "Cài đặt AMS" + +msgid "Insertion update" +msgstr "Cập nhật khi cắm" + +msgid "" +"The AMS will automatically read the filament information when inserting a " +"new Bambu Lab filament. This takes about 20 seconds." +msgstr "" +"AMS sẽ tự động đọc thông tin filament khi cắm filament Bambu Lab mới. Điều " +"này mất khoảng 20 giây." + +msgid "" +"Note: if a new filament is inserted during printing, the AMS will not " +"automatically read any information until printing is completed." +msgstr "" +"Lưu ý: nếu filament mới được cắm trong khi in, AMS sẽ không tự động đọc " +"thông tin nào cho đến khi in hoàn tất." + +msgid "" +"When inserting a new filament, the AMS will not automatically read its " +"information, leaving it blank for you to enter manually." +msgstr "" +"Khi cắm filament mới, AMS sẽ không tự động đọc thông tin của nó, để trống để " +"bạn nhập thủ công." + +msgid "Power on update" +msgstr "Cập nhật khi bật nguồn" + +msgid "" +"The AMS will automatically read the information of inserted filament on " +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." +msgstr "" +"AMS sẽ tự động đọc thông tin của filament đã cắm khi khởi động. Sẽ mất " +"khoảng 1 phút. Quá trình đọc sẽ cuộn các cuộn filament." + +msgid "" +"The AMS will not automatically read information from inserted filament " +"during startup and will continue to use the information recorded before the " +"last shutdown." +msgstr "" +"AMS sẽ không tự động đọc thông tin từ filament đã cắm trong khi khởi động và " +"sẽ tiếp tục sử dụng thông tin đã ghi trước lần tắt máy cuối cùng." + +msgid "Update remaining capacity" +msgstr "Cập nhật dung lượng còn lại" + +msgid "" +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." +msgstr "" + +msgid "AMS filament backup" +msgstr "Sao lưu filament AMS" + +msgid "" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." +msgstr "" +"AMS sẽ tiếp tục sang cuộn khác có thuộc tính filament khớp tự động khi " +"filament hiện tại hết." + +msgid "Air Printing Detection" +msgstr "Phát hiện in không" + +msgid "" +"Detects clogging and filament grinding, halting printing immediately to " +"conserve time and filament." +msgstr "" +"Phát hiện tắc nghẽn và mài filament, dừng in ngay lập tức để tiết kiệm thời " +"gian và filament." + +msgid "File" +msgstr "File" + +msgid "Calibration" +msgstr "Hiệu chỉnh" + +msgid "" +"Failed to download the plug-in. Please check your firewall settings and vpn " +"software, check and retry." +msgstr "" +"Tải plug-in thất bại. Vui lòng kiểm tra cài đặt firewall và phần mềm vpn , " +"kiểm tra và thử lại." + +msgid "" +"Failed to install the plug-in. Please check whether it is blocked or deleted " +"by anti-virus software." +msgstr "" +"Cài đặt plug-in thất bại. Vui lòng kiểm tra xem nó có bị chặn hoặc xóa bởi " +"phần mềm diệt virus không." + +msgid "click here to see more info" +msgstr "nhấn vào đây để xem thêm thông tin" + +msgid "Please home all axes (click " +msgstr "Vui lòng về gốc tất cả các trục (nhấn " + +msgid "" +") to locate the toolhead's position. This prevents device moving beyond the " +"printable boundary and causing equipment wear." +msgstr "" +") để xác định vị trí của đầu công cụ. Điều này ngăn thiết bị di chuyển vượt " +"quá ranh giới có thể in và gây hao mòn thiết bị." + +msgid "Go Home" +msgstr "Về gốc" + +msgid "" +"A error occurred. Maybe memory of system is not enough or it's a bug of the " +"program" +msgstr "" +"Xảy ra lỗi. Có thể bộ nhớ của hệ thống không đủ hoặc đây là lỗi của chương " +"trình" + +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "Xảy ra lỗi nghiêm trọng: \"%1%\"" + +msgid "Please save project and restart the program." +msgstr "Vui lòng lưu dự án và khởi động lại chương trình." + +msgid "Processing G-code from Previous file..." +msgstr "Đang xử lý G-code từ file trước..." + +msgid "Slicing complete" +msgstr "Slice hoàn tất" + +msgid "Access violation" +msgstr "Vi phạm truy cập" + +msgid "Illegal instruction" +msgstr "Lệnh không hợp lệ" + +msgid "Divide by zero" +msgstr "Chia cho không" + +msgid "Overflow" +msgstr "Tràn số" + +msgid "Underflow" +msgstr "Thiếu số" + +msgid "Floating reserved operand" +msgstr "Toán hạng dự trữ dấu phẩy động" + +msgid "Stack overflow" +msgstr "Tràn ngăn xếp" + +msgid "Running post-processing scripts" +msgstr "Đang chạy script hậu xử lý" + +msgid "Successfully executed post-processing script" +msgstr "Thực thi script hậu xử lý thành công" + +msgid "Unknown error occurred during exporting G-code." +msgstr "Xảy ra lỗi không xác định trong khi xuất G-code." + +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed. Maybe the SD " +"card is write locked?\n" +"Error message: %1%" +msgstr "" +"Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể thẻ SD bị khóa " +"ghi?\n" +"Thông báo lỗi: %1%" + +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed. There might be " +"problem with target device, please try exporting again or using different " +"device. The corrupted output G-code is at %1%.tmp." +msgstr "" +"Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể có vấn đề với " +"thiết bị đích, vui lòng thử xuất lại hoặc dùng thiết bị khác. G-code đầu ra " +"bị hỏng ở %1%.tmp." + +#, boost-format +msgid "" +"Renaming of the G-code after copying to the selected destination folder has " +"failed. Current path is %1%.tmp. Please try exporting again." +msgstr "" +"Đổi tên G-code sau khi sao chép vào thư mục đích đã chọn thất bại. Đường dẫn " +"hiện tại là %1%.tmp. Vui lòng thử xuất lại." + +#, boost-format +msgid "" +"Copying of the temporary G-code has finished but the original code at %1% " +"couldn't be opened during copy check. The output G-code is at %2%.tmp." +msgstr "" +"Sao chép G-code tạm thời đã hoàn tất nhưng code gốc tại %1% không thể mở " +"trong khi kiểm tra sao chép. G-code đầu ra ở %2%.tmp." + +#, boost-format +msgid "" +"Copying of the temporary G-code has finished but the exported code couldn't " +"be opened during copy check. The output G-code is at %1%.tmp." +msgstr "" +"Sao chép G-code tạm thời đã hoàn tất nhưng code đã xuất không thể mở trong " +"khi kiểm tra sao chép. G-code đầu ra ở %1%.tmp." + +#, boost-format +msgid "G-code file exported to %1%" +msgstr "File G-code đã xuất ra %1%" + +msgid "Unknown error when exporting G-code." +msgstr "Lỗi không xác định khi xuất G-code." + +#, boost-format +msgid "" +"Failed to save G-code file.\n" +"Error message: %1%.\n" +"Source file %2%." +msgstr "" +"Không thể lưu file G-code.\n" +"Thông báo lỗi: %1%.\n" +"File nguồn %2%." + +msgid "Copying of the temporary G-code to the output G-code failed" +msgstr "Sao chép G-code tạm thời sang G-code đầu ra thất bại" + +#, boost-format +msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" +msgstr "Đang lên lịch tải lên `%1%`. Xem Window -> Hàng đợi tải lên Print Host" + +msgid "Origin" +msgstr "Gốc" + +msgid "Size in X and Y of the rectangular plate." +msgstr "Kích thước theo X và Y của plate chữ nhật." + +msgid "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." +msgstr "" +"Khoảng cách của tọa độ G-code 0,0 từ góc trái phía trước của hình chữ nhật." + +msgid "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." +msgstr "Đường kính của đế in. Giả định rằng gốc (0,0) nằm ở tâm." + +msgid "Rectangular" +msgstr "Hình chữ nhật" + +msgid "Circular" +msgstr "Hình tròn" + +msgid "Load shape from STL..." +msgstr "Tải hình dạng từ STL..." + +msgid "Settings" +msgstr "Cài đặt" + +msgid "Texture" +msgstr "Kết cấu" + +msgid "Remove" +msgstr "Xóa" + +msgid "Not found:" +msgstr "Không tìm thấy:" + +msgid "Model" +msgstr "Model" + +msgid "Choose an STL file to import bed shape from:" +msgstr "Chọn file STL để nhập hình dạng đế từ:" + +msgid "Invalid file format." +msgstr "Định dạng file không hợp lệ." + +msgid "Error! Invalid model" +msgstr "Lỗi! Model không hợp lệ" + +msgid "The selected file contains no geometry." +msgstr "File đã chọn không chứa hình học." + +msgid "" +"The selected file contains several disjoint areas. This is not supported." +msgstr "File đã chọn chứa nhiều vùng rời nhau. Điều này không được hỗ trợ." + +msgid "Choose a file to import bed texture from (PNG/SVG):" +msgstr "Chọn file để nhập kết cấu đế từ (PNG/SVG):" + +msgid "Choose an STL file to import bed model from:" +msgstr "Chọn file STL để nhập model đế từ:" + +msgid "Bed Shape" +msgstr "Hình dạng đế" + +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" +msgstr "" + +msgid "" +"The recommended minimum temperature cannot be higher than the recommended " +"maximum temperature.\n" +msgstr "" +"Nhiệt độ tối thiểu khuyến nghị không thể cao hơn nhiệt độ tối đa khuyến " +"nghị.\n" + +msgid "Please check.\n" +msgstr "Vui lòng kiểm tra.\n" + +msgid "" +"Nozzle may be blocked when the temperature is out of recommended range.\n" +"Please make sure whether to use the temperature to print.\n" +"\n" +msgstr "" +"Vòi phun có thể bị tắc khi nhiệt độ nằm ngoài phạm vi khuyến nghị.\n" +"Vui lòng đảm bảo có sử dụng nhiệt độ này để in không.\n" +"\n" + +#, c-format, boost-format +msgid "" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." +msgstr "Nhiệt độ vòi phun khuyến nghị cho loại filament này là [%d, %d] độ C." + +msgid "" +"Too small max volumetric speed.\n" +"Reset to 0.5." +msgstr "" +"Tốc độ thể tích tối đa quá nhỏ.\n" +"Đặt lại về 0.5." + +#, c-format, boost-format +msgid "" +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " +"temperature for the material is %d" +msgstr "" +"Nhiệt độ buồng hiện tại cao hơn nhiệt độ an toàn của vật liệu, điều này có " +"thể dẫn đến vật liệu mềm và tắc nghẽn. Nhiệt độ an toàn tối đa cho vật liệu " +"là %d" + +msgid "" +"Too small layer height.\n" +"Reset to 0.2." +msgstr "" +"Chiều cao lớp quá nhỏ.\n" +"Đặt lại về 0.2." + +msgid "" +"Too small ironing spacing.\n" +"Reset to 0.1." +msgstr "" +"Khoảng cách ironing quá nhỏ.\n" +"Đặt lại về 0.1." + +msgid "" +"Zero initial layer height is invalid.\n" +"\n" +"The first layer height will be reset to 0.2." +msgstr "" +"Chiều cao lớp đầu tiên bằng không không hợp lệ.\n" +"\n" +"Chiều cao lớp đầu tiên sẽ được đặt lại về 0.2." + +msgid "" +"This setting is only used for model size tunning with small value in some " +"cases.\n" +"For example, when model size has small error and hard to be assembled.\n" +"For large size tuning, please use model scale function.\n" +"\n" +"The value will be reset to 0." +msgstr "" +"Cài đặt này chỉ dùng để điều chỉnh kích thước model với giá trị nhỏ trong " +"một số trường hợp.\n" +"Ví dụ, khi kích thước model có lỗi nhỏ và khó lắp ráp.\n" +"Để điều chỉnh kích thước lớn, vui lòng dùng chức năng co giãn model.\n" +"\n" +"Giá trị sẽ được đặt lại về 0." + +msgid "" +"Too large elephant foot compensation is unreasonable.\n" +"If really have serious elephant foot effect, please check other settings.\n" +"For example, whether bed temperature is too high.\n" +"\n" +"The value will be reset to 0." +msgstr "" +"Bù chân voi quá lớn là không hợp lý.\n" +"Nếu thực sự có hiệu ứng chân voi nghiêm trọng, vui lòng kiểm tra các cài đặt " +"khác.\n" +"Ví dụ, nhiệt độ đế có quá cao không.\n" +"\n" +"Giá trị sẽ được đặt lại về 0." + +msgid "" +"Alternate extra wall does't work well when ensure vertical shell thickness " +"is set to All." +msgstr "" +"Luân phiên wall phụ không hoạt động tốt khi đảm bảo độ dày shell dọc được " +"đặt thành Tất cả." + +msgid "" +"Change these settings automatically?\n" +"Yes - Change ensure vertical shell thickness to Moderate and enable " +"alternate extra wall\n" +"No - Don't use alternate extra wall" +msgstr "" +"Thay đổi các cài đặt này tự động?\n" +"Yes - Đổi đảm bảo độ dày shell dọc thành Vừa phải và bật luân phiên wall " +"phụ\n" +"No - Không dùng luân phiên wall phụ" + +msgid "" +"Prime tower does not work when Adaptive Layer Height or Independent Support " +"Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Adaptive Layer Height and Independent Support Layer Height" +msgstr "" +"Prime tower không hoạt động khi chiều cao lớp thích ứng hoặc chiều cao lớp " +"support độc lập được bật.\n" +"Bạn muốn giữ cái nào?\n" +"YES - Giữ prime tower\n" +"NO - Giữ chiều cao lớp thích ứng và chiều cao lớp support độc lập" + +msgid "" +"Prime tower does not work when Adaptive Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Adaptive Layer Height" +msgstr "" +"Prime tower không hoạt động khi chiều cao lớp thích ứng được bật.\n" +"Bạn muốn giữ cái nào?\n" +"YES - Giữ prime tower\n" +"NO - Giữ chiều cao lớp thích ứng" + +msgid "" +"Prime tower does not work when Independent Support Layer Height is on.\n" +"Which do you want to keep?\n" +"YES - Keep Prime Tower\n" +"NO - Keep Independent Support Layer Height" +msgstr "" +"Prime tower không hoạt động khi chiều cao lớp support độc lập được bật.\n" +"Bạn muốn giữ cái nào?\n" +"YES - Giữ prime tower\n" +"NO - Giữ chiều cao lớp support độc lập" + +msgid "" +"seam_slope_start_height need to be smaller than layer_height.\n" +"Reset to 0." +msgstr "" +"seam_slope_start_height cần nhỏ hơn layer_height.\n" +"Đặt lại về 0." + +#, fuzzy, c-format, boost-format +msgid "" +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"Độ sâu khóa phải nhỏ hơn độ sâu skin.\n" +"Đặt lại về 50% của độ sâu skin." + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "" +"Cả chế độ [Extrusion] và [Combined] của Fuzzy Skin đều yêu cầu trình tạo " +"wall Arachne được bật." + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"Thay đổi các cài đặt này tự động?\n" +"Yes - Bật trình tạo wall Arachne\n" +"No - Tắt trình tạo wall Arachne và đặt chế độ [Displacement] của Fuzzy Skin" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." +msgstr "" + +msgid " But machines with I3 structure will not generate timelapse videos." +msgstr " Nhưng máy có cấu trúc I3 sẽ không tạo video timelapse." + +msgid "" +"Change these settings automatically?\n" +"Yes - Change these settings and enable spiral mode automatically\n" +"No - Give up using spiral mode this time" +msgstr "" +"Thay đổi các cài đặt này tự động?\n" +"Yes - Thay đổi các cài đặt này và bật chế độ spiral tự động\n" +"No - Từ bỏ dùng chế độ spiral lần này" + +msgid "Printing" +msgstr "Đang in" + +msgid "Auto bed leveling" +msgstr "Tự động san bằng đế" + +msgid "Heatbed preheating" +msgstr "Làm nóng trước đế nóng" + +msgid "Vibration compensation" +msgstr "Bù rung" + +msgid "Changing filament" +msgstr "Đang đổi filament" + +msgid "M400 pause" +msgstr "Tạm dừng M400" + +msgid "Paused (filament ran out)" +msgstr "" + +msgid "Heating nozzle" +msgstr "" + +msgid "Calibrating dynamic flow" +msgstr "" + +msgid "Scanning bed surface" +msgstr "Đang quét bề mặt đế" + +msgid "Inspecting first layer" +msgstr "Đang kiểm tra lớp đầu tiên" + +msgid "Identifying build plate type" +msgstr "Đang xác định loại plate in" + +msgid "Calibrating Micro Lidar" +msgstr "Đang hiệu chỉnh Micro Lidar" + +msgid "Homing toolhead" +msgstr "Đang đưa đầu công cụ về gốc" + +msgid "Cleaning nozzle tip" +msgstr "Đang làm sạch đầu vòi phun" + +msgid "Checking extruder temperature" +msgstr "Đang kiểm tra nhiệt độ extruder" + +msgid "Paused by the user" +msgstr "" + +msgid "Pause (front cover fall off)" +msgstr "" + +msgid "Calibrating the micro lidar" +msgstr "Đang hiệu chỉnh micro lidar" + +msgid "Calibrating flow ratio" +msgstr "" + +msgid "Pause (nozzle temperature malfunction)" +msgstr "" + +msgid "Pause (heatbed temperature malfunction)" +msgstr "" + +msgid "Filament unloading" +msgstr "Đang tháo filament" + +msgid "Pause (step loss)" +msgstr "" + +msgid "Filament loading" +msgstr "Đang nạp filament" + +msgid "Motor noise cancellation" +msgstr "Khử tiếng ồn động cơ" + +msgid "Pause (AMS offline)" +msgstr "" + +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" + +msgid "Pause (chamber temperature control problem)" +msgstr "" + +msgid "Cooling chamber" +msgstr "Làm mát buồng" + +msgid "Pause (G-code inserted by user)" +msgstr "" + +msgid "Motor noise showoff" +msgstr "Trình diễn tiếng ồn động cơ" + +msgid "Pause (nozzle clumping)" +msgstr "" + +msgid "Pause (cutter error)" +msgstr "" + +msgid "Pause (first layer error)" +msgstr "" + +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" + +msgid "Unknown" +msgstr "Không rõ" + +msgid "Update successful." +msgstr "Cập nhật thành công." + +msgid "Downloading failed." +msgstr "Tải xuống thất bại." + +msgid "Verification failed." +msgstr "Xác minh thất bại." + +msgid "Update failed." +msgstr "Cập nhật thất bại." + +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." +msgstr "" + +msgid "" +"When you set the chamber temperature below 40℃, the chamber temperature " +"control will not be activated, and the target chamber temperature will " +"automatically be set to 0℃." +msgstr "" +"Khi bạn đặt nhiệt độ buồng dưới 40℃, kiểm soát nhiệt độ buồng sẽ không được " +"kích hoạt, và nhiệt độ buồng đích sẽ tự động được đặt thành 0℃." + +msgid "Failed to start print job" +msgstr "Không thể bắt đầu công việc in" + +msgid "" +"This calibration does not support the currently selected nozzle diameter" +msgstr "Hiệu chỉnh này không hỗ trợ đường kính vòi phun hiện được chọn" + +msgid "Current flowrate cali param is invalid" +msgstr "Tham số hiệu chỉnh flowrate hiện tại không hợp lệ" + +msgid "Selected diameter and machine diameter do not match" +msgstr "Đường kính đã chọn và đường kính máy không khớp" + +msgid "Failed to generate cali G-code" +msgstr "Không thể tạo G-code hiệu chỉnh" + +msgid "Calibration error" +msgstr "Lỗi hiệu chỉnh" + +msgid "Resume Printing" +msgstr "Tiếp tục in" + +msgid "Resume (defects acceptable)" +msgstr "" + +msgid "Resume (problem solved)" +msgstr "" + +msgid "Stop Printing" +msgstr "Dừng in" + +msgid "Check Assistant" +msgstr "Kiểm tra trợ lý" + +msgid "Filament Extruded, Continue" +msgstr "Filament đã đùn, tiếp tục" + +msgid "Not Extruded Yet, Retry" +msgstr "Chưa đùn, thử lại" + +msgid "Finished, Continue" +msgstr "Đã hoàn thành, tiếp tục" + +msgid "Load Filament" +msgstr "Nạp filament" + +msgid "Filament Loaded, Resume" +msgstr "Filament đã nạp, tiếp tục" + +msgid "View Liveview" +msgstr "Xem trực tiếp" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "Hoàn thành" + +msgid "Retry" +msgstr "Thử lại" + +msgid "Resume" +msgstr "Tiếp tục" + +msgid "Unknown error." +msgstr "" + +msgid "default" +msgstr "mặc định" + +#, boost-format +msgid "Edit Custom G-code (%1%)" +msgstr "Chỉnh sửa G-code tùy chỉnh (%1%)" + +msgid "Built-in placeholders (Double click item to add to G-code)" +msgstr "Trình giữ chỗ tích hợp (Nhấp đúp mục để thêm vào G-code)" + +msgid "Search G-code placeholders" +msgstr "Tìm kiếm trình giữ chỗ G-code" + +msgid "Add selected placeholder to G-code" +msgstr "Thêm trình giữ chỗ đã chọn vào G-code" + +msgid "Select placeholder" +msgstr "Chọn trình giữ chỗ" + +msgid "[Global] Slicing State" +msgstr "[Toàn cục] Trạng thái slice" + +msgid "Read Only" +msgstr "Chỉ đọc" + +msgid "Read Write" +msgstr "Đọc ghi" + +msgid "Slicing State" +msgstr "Trạng thái slice" + +msgid "Print Statistics" +msgstr "Thống kê in" + +msgid "Objects Info" +msgstr "Thông tin vật thể" + +msgid "Dimensions" +msgstr "Kích thước" + +msgid "Temperatures" +msgstr "Nhiệt độ" + +msgid "Timestamps" +msgstr "Dấu thời gian" + +#, boost-format +msgid "Specific for %1%" +msgstr "Cụ thể cho %1%" + +msgid "Presets" +msgstr "Preset" + +msgid "Print settings" +msgstr "Cài đặt in" + +msgid "Filament settings" +msgstr "Cài đặt filament" + +msgid "SLA Materials settings" +msgstr "Cài đặt vật liệu SLA" + +msgid "Printer settings" +msgstr "Cài đặt máy in" + +msgid "parameter name" +msgstr "tên tham số" + +#, c-format, boost-format +msgid "%s can't be a percentage" +msgstr "%s không thể là phần trăm" + +#, c-format, boost-format +msgid "Value %s is out of range, continue?" +msgstr "Giá trị %s nằm ngoài phạm vi, tiếp tục?" + +msgid "Parameter validation" +msgstr "Xác thực tham số" + +#, c-format, boost-format +msgid "Value %s is out of range. The valid range is from %d to %d." +msgstr "Giá trị %s nằm ngoài phạm vi. Phạm vi hợp lệ từ %d đến %d." + +msgid "Value is out of range." +msgstr "Giá trị nằm ngoài phạm vi." + +#, c-format, boost-format +msgid "" +"Is it %s%% or %s %s?\n" +"YES for %s%%, \n" +"NO for %s %s." +msgstr "" +"Là %s%% hay %s %s?\n" +"YES cho %s%%, \n" +"NO cho %s %s." + +#, boost-format +msgid "" +"Invalid input format. Expected vector of dimensions in the following format: " +"\"%1%\"" +msgstr "" +"Định dạng đầu vào không hợp lệ. Mong đợi vector kích thước theo định dạng " +"sau: \"%1%\"" + +msgid "Input value is out of range" +msgstr "Giá trị đầu vào nằm ngoài phạm vi" + +msgid "Some extension in the input is invalid" +msgstr "Một số phần mở rộng trong đầu vào không hợp lệ" + +msgid "This parameter expects a valid template." +msgstr "Tham số này mong đợi một mẫu hợp lệ." + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." +msgstr "" +"Mẫu không hợp lệ. Dùng N, N#K, hoặc danh sách phân cách dấu phẩy với tùy " +"chọn #K mỗi mục. Ví dụ: 5, 5#2, 1,7,9, 5,9#2,18." + +#, boost-format +msgid "Invalid format. Expected vector format: \"%1%\"" +msgstr "Định dạng không hợp lệ. Mong đợi định dạng vector: \"%1%\"" + +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "Chọn" + +msgid "Summary" +msgstr "" + +msgid "Layer Height" +msgstr "Chiều cao lớp" + +msgid "Line Width" +msgstr "Độ rộng đường" + +msgid "Fan Speed" +msgstr "Tốc độ quạt" + +msgid "Flow" +msgstr "Flow" + +msgid "Tool" +msgstr "Công cụ" + +msgid "Layer Time" +msgstr "Thời gian lớp" + +msgid "Layer Time (log)" +msgstr "Thời gian lớp (log)" + +msgid "Height: " +msgstr "Chiều cao: " + +msgid "Width: " +msgstr "Độ rộng: " + +msgid "Speed: " +msgstr "Tốc độ: " + +msgid "Flow: " +msgstr "Flow: " + +msgid "Layer Time: " +msgstr "Thời gian lớp: " + +msgid "Fan: " +msgstr "Quạt: " + +msgid "Temperature: " +msgstr "Nhiệt độ: " + +msgid "Loading G-code" +msgstr "Đang tải G-code" + +msgid "Generating geometry vertex data" +msgstr "Đang tạo dữ liệu đỉnh hình học" + +msgid "Generating geometry index data" +msgstr "Đang tạo dữ liệu chỉ số hình học" + +msgid "Statistics of All Plates" +msgstr "Thống kê tất cả các plate" + +msgid "Display" +msgstr "Hiển thị" + +msgid "Flushed" +msgstr "Đã flush" + +msgid "Tower" +msgstr "Tháp" + +msgid "Total" +msgstr "Tổng" + +msgid "Total Estimation" +msgstr "Ước tính tổng" + +msgid "Total time" +msgstr "Tổng thời gian" + +msgid "Total cost" +msgstr "Tổng chi phí" + +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "Mẹo:" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "Mẹo" + +msgid "up to" +msgstr "lên đến" + +msgid "above" +msgstr "trên" + +msgid "from" +msgstr "từ" + +msgid "Time" +msgstr "Thời gian" + +msgid "Usage" +msgstr "Sử dụng" + +msgid "Layer Height (mm)" +msgstr "Chiều cao lớp (mm)" + +msgid "Line Width (mm)" +msgstr "Độ rộng đường (mm)" + +msgid "Speed (mm/s)" +msgstr "Tốc độ (mm/s)" + +msgid "Fan Speed (%)" +msgstr "Tốc độ quạt (%)" + +msgid "Temperature (°C)" +msgstr "Nhiệt độ (°C)" + +msgid "Volumetric flow rate (mm³/s)" +msgstr "Tốc độ flow thể tích (mm³/s)" + +msgid "Travel" +msgstr "Di chuyển" + +msgid "Seams" +msgstr "Seam" + +msgid "Retract" +msgstr "Rút" + +msgid "Unretract" +msgstr "Đẩy lại" + +msgid "Filament Changes" +msgstr "Đổi filament" + +msgid "Wipe" +msgstr "Wipe" + +msgid "Options" +msgstr "Tùy chọn" + +msgid "travel" +msgstr "di chuyển" + +msgid "Extruder" +msgstr "Extruder" + +msgid "Cost" +msgstr "Chi phí" + +msgid "Filament change times" +msgstr "Số lần đổi filament" + +msgid "Color change" +msgstr "Đổi màu" + +msgid "Print" +msgstr "In" + +msgid "Printer" +msgstr "Máy in" + +msgid "Tool Change" +msgstr "Đổi công cụ" + +msgid "Time Estimation" +msgstr "Ước tính thời gian" + +msgid "Normal mode" +msgstr "Chế độ bình thường" + +msgid "Total Filament" +msgstr "Tổng filament" + +msgid "Model Filament" +msgstr "Filament model" + +msgid "Prepare time" +msgstr "Thời gian chuẩn bị" + +msgid "Model printing time" +msgstr "Thời gian in model" + +msgid "Switch to silent mode" +msgstr "Chuyển sang chế độ im lặng" + +msgid "Switch to normal mode" +msgstr "Chuyển sang chế độ bình thường" + +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"Một đối tượng nằm trên ranh giới của bản hoặc vượt quá giới hạn chiều cao.\n" +"Vui lòng giải quyết vấn đề bằng cách di chuyển nó hoàn toàn trên hoặc ra " +"khỏi bản, và xác nhận rằng chiều cao nằm trong thể tích xây dựng." + +msgid "Variable layer height" +msgstr "Chiều cao lớp biến đổi" + +msgid "Adaptive" +msgstr "Thích ứng" + +msgid "Quality / Speed" +msgstr "Chất lượng / Tốc độ" + +msgid "Smooth" +msgstr "Mượt" + +msgid "Radius" +msgstr "Bán kính" + +msgid "Keep min" +msgstr "Giữ tối thiểu" + +msgid "Add detail" +msgstr "Thêm chi tiết" + +msgid "Remove detail" +msgstr "Xóa chi tiết" + +msgid "Reset to base" +msgstr "Đặt lại về cơ bản" + +msgid "Smoothing" +msgstr "Làm mượt" + +msgid "Mouse wheel:" +msgstr "Con lăn chuột:" + +msgid "Increase/decrease edit area" +msgstr "Tăng/giảm vùng chỉnh sửa" + +msgid "Sequence" +msgstr "Trình tự" + +msgid "object selection" +msgstr "chọn vật thể" + +msgid "part selection" +msgstr "chọn phần" + +msgid "number keys" +msgstr "phím số" + +msgid "number keys can quickly change the color of objects" +msgstr "phím số có thể nhanh chóng đổi màu của vật thể" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + +msgid "Mirror Object" +msgstr "Lật vật thể" + +msgid "Tool Move" +msgstr "Công cụ di chuyển" + +msgid "Tool Rotate" +msgstr "Công cụ xoay" + +msgid "Move Object" +msgstr "Di chuyển vật thể" + +msgid "Auto Orientation options" +msgstr "Tùy chọn tự động định hướng" + +msgid "Enable rotation" +msgstr "Bật xoay" + +msgid "Optimize support interface area" +msgstr "Tối ưu diện tích bề mặt support" + +msgid "Orient" +msgstr "Định hướng" + +msgid "Arrange options" +msgstr "Tùy chọn sắp xếp" + +msgid "Spacing" +msgstr "Khoảng cách" + +msgid "0 means auto spacing." +msgstr "0 nghĩa là tự động khoảng cách." + +msgid "Auto rotate for arrangement" +msgstr "Tự động xoay để sắp xếp" + +msgid "Allow multiple materials on same plate" +msgstr "Cho phép nhiều vật liệu trên cùng plate" + +msgid "Avoid extrusion calibration region" +msgstr "Tránh vùng hiệu chỉnh đùn" + +msgid "Align to Y axis" +msgstr "Căn theo trục Y" + +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "Thêm" + +msgid "Add plate" +msgstr "Thêm plate" + +msgid "Auto orient all/selected objects" +msgstr "Tự động định hướng tất cả/các vật thể đã chọn" + +msgid "Auto orient all objects on current plate" +msgstr "Tự động định hướng tất cả vật thể trên plate hiện tại" + +msgid "Arrange all objects" +msgstr "Sắp xếp tất cả vật thể" + +msgid "Arrange objects on selected plates" +msgstr "Sắp xếp vật thể trên các plate đã chọn" + +msgid "Split to objects" +msgstr "Tách thành vật thể" + +msgid "Split to parts" +msgstr "Tách thành phần" + +msgid "Assembly View" +msgstr "Chế độ xem lắp ráp" + +msgid "Select Plate" +msgstr "Chọn plate" + +msgid "Slicing" +msgstr "Đang slice" + +msgid "Slice all" +msgstr "Slice tất cả" + +msgid "Failed" +msgstr "Thất bại" + +msgid "All Plates" +msgstr "Tất cả plate" + +msgid "Stats" +msgstr "Thống kê" + +msgid "Assembly Return" +msgstr "Trở về lắp ráp" + +msgid "Return" +msgstr "Trở về" + +msgid "Toggle Axis" +msgstr "" + +msgid "Paint Toolbar" +msgstr "Thanh công cụ vẽ" + +msgid "Explosion Ratio" +msgstr "Tỷ lệ nổ" + +msgid "Section View" +msgstr "Chế độ xem mặt cắt" + +msgid "Assemble Control" +msgstr "Điều khiển lắp ráp" + +msgid "Selection Mode" +msgstr "Chế độ chọn" + +msgid "Total Volume:" +msgstr "Tổng thể tích:" + +msgid "Assembly Info" +msgstr "Thông tin lắp ráp" + +msgid "Volume:" +msgstr "Thể tích:" + +msgid "Size:" +msgstr "Kích thước:" + +#, c-format, boost-format +msgid "" +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " +"separate the conflicted objects farther (%s <-> %s)." +msgstr "" +"Đã tìm thấy xung đột đường đi G-code tại lớp %d, Z = %.2lfmm. Vui lòng tách " +"các vật thể xung đột ra xa hơn (%s <-> %s)." + +msgid "An object is laid over the plate boundaries." +msgstr "Một vật thể nằm vượt ra ngoài ranh giới plate." + +msgid "A G-code path goes beyond the max print height." +msgstr "Đường đi G-code vượt quá chiều cao in tối đa." + +msgid "A G-code path goes beyond the plate boundaries." +msgstr "Đường đi G-code vượt ra ngoài ranh giới plate." + +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." +msgstr "Chỉ vật thể đang được chỉnh sửa là hiển thị." + +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" +msgstr "" + +msgid "Calibration step selection" +msgstr "Chọn bước hiệu chỉnh" + +msgid "Micro lidar calibration" +msgstr "Hiệu chỉnh micro lidar" + +msgid "Bed leveling" +msgstr "San bằng đế" + +msgid "High-temperature Heatbed Calibration" +msgstr "" + +msgid "Calibration program" +msgstr "Chương trình hiệu chỉnh" + +msgid "" +"The calibration program detects the status of your device automatically to " +"minimize deviation.\n" +"It keeps the device performing optimally." +msgstr "" +"Chương trình hiệu chỉnh phát hiện trạng thái của thiết bị tự động để giảm " +"thiểu độ lệch.\n" +"Nó giữ cho thiết bị hoạt động tối ưu." + +msgid "Calibration Flow" +msgstr "Quy trình hiệu chỉnh" + +msgid "Start Calibration" +msgstr "Bắt đầu hiệu chỉnh" + +msgid "Completed" +msgstr "Hoàn tất" + +msgid "Calibrating" +msgstr "Đang hiệu chỉnh" + +msgid "No step selected" +msgstr "Không có bước được chọn" + +msgid "Auto-record Monitoring" +msgstr "Giám sát tự động ghi" + +msgid "Go Live" +msgstr "Phát trực tiếp" + +msgid "Liveview Retry" +msgstr "Thử lại xem trực tiếp" + +msgid "Resolution" +msgstr "Độ phân giải" + +msgid "Enable" +msgstr "Bật" + +msgid "Hostname or IP" +msgstr "Tên máy chủ hoặc IP" + +msgid "Custom camera source" +msgstr "Nguồn camera tùy chỉnh" + +msgid "Show \"Live Video\" guide page." +msgstr "Hiện trang hướng dẫn \"Video trực tiếp\"." + +msgid "Connect Printer (LAN)" +msgstr "Kết nối máy in (LAN)" + +msgid "Please input the printer access code:" +msgstr "Vui lòng nhập mã truy cập máy in:" + +msgid "" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "Invalid input." +msgstr "Đầu vào không hợp lệ." + +msgid "New Window" +msgstr "Cửa sổ mới" + +msgid "Open a new window" +msgstr "Mở cửa sổ mới" + +msgid "Application is closing" +msgstr "Ứng dụng đang đóng" + +msgid "Closing Application while some presets are modified." +msgstr "Đang đóng ứng dụng trong khi một số preset được sửa đổi." + +msgid "Logging" +msgstr "Ghi nhật ký" + +msgid "Prepare" +msgstr "Chuẩn bị" + +msgid "Preview" +msgstr "Xem trước" + +msgid "Device" +msgstr "Thiết bị" + +msgid "Multi-device" +msgstr "Nhiều thiết bị" + +msgid "Project" +msgstr "Dự án" + +msgid "Yes" +msgstr "Có" + +msgid "No" +msgstr "Không" + +msgid "will be closed before creating a new model. Do you want to continue?" +msgstr "sẽ bị đóng trước khi tạo model mới. Bạn có muốn tiếp tục?" + +msgid "Slice plate" +msgstr "Slice plate" + +msgid "Print plate" +msgstr "In plate" + +msgid "Export G-code file" +msgstr "Xuất file G-code" + +msgid "Send" +msgstr "Gửi" + +msgid "Export plate sliced file" +msgstr "Xuất file plate đã slice" + +msgid "Export all sliced file" +msgstr "Xuất tất cả file đã slice" + +msgid "Print all" +msgstr "In tất cả" + +msgid "Send all" +msgstr "Gửi tất cả" + +msgid "Send to Multi-device" +msgstr "Gửi đến nhiều thiết bị" + +msgid "Keyboard Shortcuts" +msgstr "Phím tắt" + +msgid "Show the list of the keyboard shortcuts" +msgstr "Hiện danh sách phím tắt" + +msgid "Setup Wizard" +msgstr "Trình hướng dẫn thiết lập" + +msgid "Show Configuration Folder" +msgstr "Hiện thư mục cấu hình" + +msgid "Show Tip of the Day" +msgstr "Hiện mẹo trong ngày" + +msgid "Check for Update" +msgstr "Kiểm tra cập nhật" + +msgid "Open Network Test" +msgstr "Mở kiểm tra mạng" + +#, c-format, boost-format +msgid "&About %s" +msgstr "&Giới thiệu %s" + +msgid "Upload Models" +msgstr "Tải lên model" + +msgid "Download Models" +msgstr "Tải xuống model" + +msgid "Default View" +msgstr "Chế độ xem mặc định" + +msgid "Top View" +msgstr "Chế độ xem trên" + +#. TRN To be shown in the main menu View->Bottom +msgid "Bottom" +msgstr "Dưới" + +msgid "Bottom View" +msgstr "Chế độ xem dưới" + +msgid "Front" +msgstr "Trước" + +msgid "Front View" +msgstr "Chế độ xem trước" + +msgid "Rear" +msgstr "Sau" + +msgid "Rear View" +msgstr "Chế độ xem sau" + +msgid "Left View" +msgstr "Chế độ xem trái" + +msgid "Right View" +msgstr "Chế độ xem phải" + +msgid "Start a new window" +msgstr "Bắt đầu cửa sổ mới" + +msgid "New Project" +msgstr "Dự án mới" + +msgid "Start a new project" +msgstr "Bắt đầu dự án mới" + +msgid "Open a project file" +msgstr "Mở file dự án" + +msgid "Recent files" +msgstr "File gần đây" + +msgid "Save Project" +msgstr "Lưu dự án" + +msgid "Save current project to file" +msgstr "Lưu dự án hiện tại vào file" + +msgid "Save Project as" +msgstr "Lưu dự án thành" + +msgid "Save current project as" +msgstr "Lưu dự án hiện tại thành" + +msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" +msgstr "Nhập 3MF/STL/STEP/SVG/OBJ/AMF" + +msgid "Load a model" +msgstr "Tải model" + +msgid "Import Zip Archive" +msgstr "Nhập lưu trữ Zip" + +msgid "Load models contained within a zip archive" +msgstr "Tải các model chứa trong lưu trữ zip" + +msgid "Import Configs" +msgstr "Nhập cấu hình" + +msgid "Load configs" +msgstr "Tải cấu hình" + +msgid "Import" +msgstr "Nhập" + +msgid "Export all objects as one STL" +msgstr "Xuất tất cả vật thể thành một STL" + +msgid "Export all objects as STLs" +msgstr "Xuất tất cả vật thể thành các STL" + +msgid "Export Generic 3MF" +msgstr "Xuất 3MF chung" + +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "Xuất file 3MF không dùng một số phần mở rộng 3mf" + +msgid "Export current sliced file" +msgstr "Xuất file đã slice hiện tại" + +msgid "Export all plate sliced file" +msgstr "Xuất tất cả file plate đã slice" + +msgid "Export G-code" +msgstr "Xuất G-code" + +msgid "Export current plate as G-code" +msgstr "Xuất plate hiện tại thành G-code" + +msgid "Export toolpaths as OBJ" +msgstr "Xuất đường công cụ thành OBJ" + +msgid "Export Preset Bundle" +msgstr "Xuất gói preset" + +msgid "Export current configuration to files" +msgstr "Xuất cấu hình hiện tại ra file" + +msgid "Export" +msgstr "Xuất" + +msgid "Quit" +msgstr "Thoát" + +msgid "Undo" +msgstr "Hoàn tác" + +msgid "Redo" +msgstr "Làm lại" + +msgid "Cut selection to clipboard" +msgstr "Cắt lựa chọn vào clipboard" + +msgid "Copy" +msgstr "Sao chép" + +msgid "Copy selection to clipboard" +msgstr "Sao chép lựa chọn vào clipboard" + +msgid "Paste" +msgstr "Dán" + +msgid "Paste clipboard" +msgstr "Dán clipboard" + +msgid "Delete selected" +msgstr "Xóa đã chọn" + +msgid "Deletes the current selection" +msgstr "Xóa lựa chọn hiện tại" + +msgid "Delete all" +msgstr "Xóa tất cả" + +msgid "Deletes all objects" +msgstr "Xóa tất cả vật thể" + +msgid "Clone selected" +msgstr "Nhân bản đã chọn" + +msgid "Clone copies of selections" +msgstr "Nhân bản các bản sao của lựa chọn" + +msgid "Duplicate Current Plate" +msgstr "Nhân đôi plate hiện tại" + +msgid "Duplicate the current plate" +msgstr "Nhân đôi plate hiện tại" + +msgid "Select all" +msgstr "Chọn tất cả" + +msgid "Selects all objects" +msgstr "Chọn tất cả vật thể" + +msgid "Deselect all" +msgstr "Bỏ chọn tất cả" + +msgid "Deselects all objects" +msgstr "Bỏ chọn tất cả vật thể" + +msgid "Use Perspective View" +msgstr "Dùng chế độ xem phối cảnh" + +msgid "Use Orthogonal View" +msgstr "Dùng chế độ xem trực giao" + +msgid "Auto Perspective" +msgstr "Tự động phối cảnh" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" +"Tự động chuyển giữa trực giao và phối cảnh khi đổi từ chế độ xem trên/dưới/" +"bên." + +msgid "Show &G-code Window" +msgstr "Hiện cửa sổ &G-code" + +msgid "Show G-code window in Preview scene." +msgstr "Hiện cửa sổ G-code trong cảnh xem trước." + +msgid "Show 3D Navigator" +msgstr "Hiện điều hướng 3D" + +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "Hiện điều hướng 3D trong cảnh chuẩn bị và xem trước." + +msgid "Reset Window Layout" +msgstr "Đặt lại bố cục cửa sổ" + +msgid "Reset to default window layout" +msgstr "Đặt lại về bố cục cửa sổ mặc định" + +msgid "Show &Labels" +msgstr "Hiện &nhãn" + +msgid "Show object labels in 3D scene." +msgstr "Hiện nhãn vật thể trong cảnh 3D." + +msgid "Show &Overhang" +msgstr "Hiện &overhang" + +msgid "Show object overhang highlight in 3D scene." +msgstr "Hiện tô sáng overhang vật thể trong cảnh 3D." + +msgid "Show Selected Outline (beta)" +msgstr "Hiện đường viền đã chọn (beta)" + +msgid "Show outline around selected object in 3D scene." +msgstr "Hiện đường viền xung quanh vật thể đã chọn trong cảnh 3D." + +msgid "Preferences" +msgstr "Tùy chọn" + +msgid "View" +msgstr "Xem" + +msgid "Help" +msgstr "Trợ giúp" + +msgid "Temperature Calibration" +msgstr "Hiệu chỉnh nhiệt độ" + +msgid "Pass 1" +msgstr "Lần 1" + +msgid "Flow rate test - Pass 1" +msgstr "Kiểm tra flow rate - Lần 1" + +msgid "Pass 2" +msgstr "Lần 2" + +msgid "Flow rate test - Pass 2" +msgstr "Kiểm tra flow rate - Lần 2" + +msgid "YOLO (Recommended)" +msgstr "YOLO (Khuyến nghị)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Hiệu chỉnh flowrate Orca YOLO, bước 0.01" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (phiên bản cầu toàn)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Hiệu chỉnh flowrate Orca YOLO, bước 0.005" + +msgid "Flow rate" +msgstr "Flow rate" + +msgid "Pressure advance" +msgstr "Pressure advance" + +msgid "Retraction test" +msgstr "Kiểm tra retraction" + +msgid "Max flowrate" +msgstr "Flowrate tối đa" + +msgid "Cornering" +msgstr "Vào góc" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "Tần số Input Shaping" + +msgid "Input Shaping Damping/zeta factor" +msgstr "Hệ số giảm chấn/zeta Input Shaping" + +msgid "Input Shaping" +msgstr "Input Shaping" + +msgid "VFA" +msgstr "VFA" + +msgid "Tutorial" +msgstr "Hướng dẫn" + +msgid "Calibration help" +msgstr "Trợ giúp hiệu chỉnh" + +msgid "&Open G-code" +msgstr "&Mở G-code" + +msgid "Open a G-code file" +msgstr "Mở file G-code" + +msgid "Re&load from Disk" +msgstr "Tải &lại từ ổ đĩa" + +msgid "Reload the plater from disk" +msgstr "Tải lại plater từ ổ đĩa" + +msgid "Export &Toolpaths as OBJ" +msgstr "Xuất đường &công cụ thành OBJ" + +msgid "Open &Slicer" +msgstr "Mở &Slicer" + +msgid "Open Slicer" +msgstr "Mở Slicer" + +msgid "&Quit" +msgstr "&Thoát" + +#, c-format, boost-format +msgid "Quit %s" +msgstr "Thoát %s" + +msgid "&File" +msgstr "&File" + +msgid "&View" +msgstr "&Xem" + +msgid "&Help" +msgstr "&Trợ giúp" + +#, c-format, boost-format +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "File đã tồn tại với cùng tên: %s, bạn có muốn ghi đè nó?" + +#, c-format, boost-format +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "Cấu hình đã tồn tại với cùng tên: %s, bạn có muốn ghi đè nó?" + +msgid "Overwrite file" +msgstr "Ghi đè file" + +msgid "Overwrite config" +msgstr "Ghi đè cấu hình" + +msgid "Yes to All" +msgstr "Có cho tất cả" + +msgid "No to All" +msgstr "Không cho tất cả" + +msgid "Choose a directory" +msgstr "Chọn thư mục" + +#, c-format, boost-format +msgid "There is %d config exported. (Only non-system configs)" +msgid_plural "There are %d configs exported. (Only non-system configs)" +msgstr[0] "Có %d cấu hình đã xuất. (Chỉ cấu hình không phải hệ thống)" + +msgid "Export result" +msgstr "Kết quả xuất" + +msgid "Select profile to load:" +msgstr "Chọn hồ sơ để tải:" + +#, c-format, boost-format +msgid "There is %d config imported. (Only non-system and compatible configs)" +msgid_plural "" +"There are %d configs imported. (Only non-system and compatible configs)" +msgstr[0] "" +"Có %d cấu hình đã nhập. (Chỉ cấu hình không phải hệ thống và tương thích)" + +msgid "" +"\n" +"Hint: Make sure you have added the corresponding printer before importing " +"the configs." +msgstr "" +"\n" +"Gợi ý: Đảm bảo bạn đã thêm máy in tương ứng trước khi nhập các cấu hình." + +msgid "Import result" +msgstr "Kết quả nhập" + +msgid "File is missing" +msgstr "File bị thiếu" + +msgid "The project is no longer available." +msgstr "Dự án không còn khả dụng." + +msgid "Filament Settings" +msgstr "Cài đặt filament" + +msgid "" +"Do you want to synchronize your personal data from Bambu Cloud?\n" +"It contains the following information:\n" +"1. The Process presets\n" +"2. The Filament presets\n" +"3. The Printer presets" +msgstr "" +"Bạn có muốn đồng bộ dữ liệu cá nhân từ Bambu Cloud?\n" +"Nó chứa các thông tin sau:\n" +"1. Preset process\n" +"2. Preset filament\n" +"3. Preset máy in" + +msgid "Synchronization" +msgstr "Đồng bộ" + +msgid "The device cannot handle more conversations. Please retry later." +msgstr "Thiết bị không thể xử lý thêm cuộc trò chuyện. Vui lòng thử lại sau." + +msgid "Player is malfunctioning. Please reinstall the system player." +msgstr "Trình phát đang trục trặc. Vui lòng cài đặt lại trình phát hệ thống." + +msgid "The player is not loaded, please click \"play\" button to retry." +msgstr "Trình phát chưa được tải, vui lòng nhấn nút \"phát\" để thử lại." + +msgid "Please confirm if the printer is connected." +msgstr "Vui lòng xác nhận xem máy in đã kết nối chưa." + +msgid "" +"The printer is currently busy downloading. Please try again after it " +"finishes." +msgstr "Máy in hiện đang bận tải xuống. Vui lòng thử lại sau khi nó hoàn tất." + +msgid "Printer camera is malfunctioning." +msgstr "Camera máy in đang trục trặc." + +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "Xảy ra vấn đề. Vui lòng cập nhật firmware máy in và thử lại." + +msgid "" +"LAN Only Liveview is off. Please turn on the liveview on printer screen." +msgstr "" +"Xem trực tiếp chỉ LAN đang tắt. Vui lòng bật xem trực tiếp trên màn hình máy " +"in." + +msgid "Please enter the IP of printer to connect." +msgstr "Vui lòng nhập IP của máy in để kết nối." + +msgid "Initializing..." +msgstr "Đang khởi tạo..." + +msgid "Connection Failed. Please check the network and try again" +msgstr "Kết nối thất bại. Vui lòng kiểm tra mạng và thử lại" + +msgid "" +"Please check the network and try again. You can restart or update the " +"printer if the issue persists." +msgstr "" +"Vui lòng kiểm tra mạng và thử lại. Bạn có thể khởi động lại hoặc cập nhật " +"máy in nếu vấn đề vẫn tiếp diễn." + +msgid "The printer has been logged out and cannot connect." +msgstr "Máy in đã đăng xuất và không thể kết nối." + +msgid "Video Stopped." +msgstr "Video đã dừng." + +msgid "LAN Connection Failed (Failed to start liveview)" +msgstr "Kết nối LAN thất bại (Không thể bắt đầu xem trực tiếp)" + +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" +"Công cụ camera ảo được yêu cầu cho tác vụ này!\n" +"Bạn có muốn cài đặt chúng?" + +msgid "Downloading Virtual Camera Tools" +msgstr "Đang tải công cụ camera ảo" + +msgid "" +"Another virtual camera is running.\n" +"Snapmaker Orca supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" +"Một camera ảo khác đang chạy.\n" +"Snapmaker Orca chỉ hỗ trợ một camera ảo duy nhất.\n" +"Bạn có muốn dừng camera ảo này?" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "Khởi tạo camera ảo thất bại (%s)!" + +msgid "Network unreachable" +msgstr "Mạng không thể truy cập" + +msgid "Information" +msgstr "Thông tin" + +msgid "Playing..." +msgstr "Đang phát..." + +msgid "Loading..." +msgstr "Đang tải..." + +msgid "Year" +msgstr "Năm" + +msgid "Month" +msgstr "Tháng" + +msgid "All Files" +msgstr "Tất cả file" + +msgid "Group files by year, recent first." +msgstr "Nhóm file theo năm, gần đây trước." + +msgid "Group files by month, recent first." +msgstr "Nhóm file theo tháng, gần đây trước." + +msgid "Show all files, recent first." +msgstr "Hiện tất cả file, gần đây trước." + +msgid "Timelapse" +msgstr "Timelapse" + +msgid "Switch to timelapse files." +msgstr "Chuyển sang file timelapse." + +msgid "Video" +msgstr "Video" + +msgid "Switch to video files." +msgstr "Chuyển sang file video." + +#, fuzzy +msgid "Switch to 3MF model files." +msgstr "Chuyển sang file model 3MF." + +msgid "Delete selected files from printer." +msgstr "Xóa file đã chọn khỏi máy in." + +msgid "Download" +msgstr "Tải xuống" + +msgid "Download selected files from printer." +msgstr "Tải xuống file đã chọn từ máy in." + +msgid "Select" +msgstr "Chọn" + +msgid "Batch manage files." +msgstr "Quản lý file hàng loạt." + +msgid "Refresh" +msgstr "Làm mới" + +msgid "Reload file list from printer." +msgstr "Tải lại danh sách file từ máy in." + +msgid "No printers." +msgstr "Không có máy in." + +msgid "Loading file list..." +msgstr "Đang tải danh sách file..." + +msgid "No files" +msgstr "Không có file" + +msgid "Load failed" +msgstr "Tải thất bại" + +msgid "" +"Browsing file in storage is not supported in current firmware. Please update " +"the printer firmware." +msgstr "" + +msgid "LAN Connection Failed (Failed to view sdcard)" +msgstr "Kết nối LAN thất bại (Không thể xem thẻ sd)" + +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" + +#, c-format, boost-format +msgid "You are going to delete %u file from printer. Are you sure to continue?" +msgid_plural "" +"You are going to delete %u files from printer. Are you sure to continue?" +msgstr[0] "Bạn sắp xóa %u file từ máy in. Bạn có chắc chắn muốn tiếp tục?" + +msgid "Delete files" +msgstr "Xóa files" + +#, c-format, boost-format +msgid "Do you want to delete the file '%s' from printer?" +msgstr "Bạn có muốn xóa file '%s' từ máy in?" + +msgid "Delete file" +msgstr "Xóa file" + +msgid "Fetching model information..." +msgstr "Đang lấy thông tin model..." + +msgid "Failed to fetch model information from printer." +msgstr "Không thể lấy thông tin model từ máy in." + +msgid "Failed to parse model information." +msgstr "Không thể phân tích thông tin model." + +msgid "" +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." +msgstr "" +"File .gcode.3mf không chứa dữ liệu G-code. Vui lòng slice với Snapmaker Orca và " +"xuất file .gcode.3mf mới." + +#, c-format, boost-format +msgid "File '%s' was lost! Please download it again." +msgstr "File '%s' đã bị mất! Vui lòng tải lại." + +#, c-format, boost-format +msgid "" +"File: %s\n" +"Title: %s\n" +msgstr "" +"File: %s\n" +"Tiêu đề: %s\n" + +msgid "Download waiting..." +msgstr "Đang chờ tải xuống..." + +msgid "Play" +msgstr "Phát" + +msgid "Open Folder" +msgstr "Mở thư mục" + +msgid "Download finished" +msgstr "Tải xuống hoàn tất" + +#, c-format, boost-format +msgid "Downloading %d%%..." +msgstr "Đang tải xuống %d%%..." + +msgid "Air Condition" +msgstr "" + +msgid "" +"Reconnecting the printer, the operation cannot be completed immediately, " +"please try again later." +msgstr "" +"Đang kết nối lại máy in, thao tác không thể hoàn thành ngay lập tức, vui " +"lòng thử lại sau." + +msgid "Timeout, please try again." +msgstr "" + +msgid "File does not exist." +msgstr "File không tồn tại." + +msgid "File checksum error. Please retry." +msgstr "Lỗi checksum file. Vui lòng thử lại." + +msgid "Not supported on the current printer version." +msgstr "Không được hỗ trợ trên phiên bản máy in hiện tại." + +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" + +#, c-format, boost-format +msgid "Error code: %d" +msgstr "Mã lỗi: %d" + +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + +msgid "Speed:" +msgstr "Tốc độ:" + +msgid "Deadzone:" +msgstr "Vùng chết:" + +msgid "Options:" +msgstr "Tùy chọn:" + +msgid "Zoom" +msgstr "Thu phóng" + +msgid "Translation/Zoom" +msgstr "Dịch chuyển/Thu phóng" + +msgid "3Dconnexion settings" +msgstr "Cài đặt 3Dconnexion" + +msgid "Swap Y/Z axes" +msgstr "Hoán đổi trục Y/Z" + +msgid "Invert X axis" +msgstr "Đảo trục X" + +msgid "Invert Y axis" +msgstr "Đảo trục Y" + +msgid "Invert Z axis" +msgstr "Đảo trục Z" + +msgid "Invert Yaw axis" +msgstr "Đảo trục Yaw" + +msgid "Invert Pitch axis" +msgstr "Đảo trục Pitch" + +msgid "Invert Roll axis" +msgstr "Đảo trục Roll" + +msgid "(LAN)" +msgstr "(LAN)" + +msgid "Search" +msgstr "" + +msgid "My Device" +msgstr "" + +msgid "Other Device" +msgstr "" + +msgid "Online" +msgstr "Trực tuyến" + +msgid "Input access code" +msgstr "Nhập mã truy cập" + +msgid "Can't find my devices?" +msgstr "" + +msgid "Log out successful." +msgstr "Đăng xuất thành công." + +msgid "Offline" +msgstr "Ngoại tuyến" + +msgid "Busy" +msgstr "Bận" + +msgid "Modifying the device name" +msgstr "" + +msgid "Name is invalid;" +msgstr "Tên không hợp lệ;" + +msgid "illegal characters:" +msgstr "ký tự không hợp lệ:" + +msgid "illegal suffix:" +msgstr "hậu tố không hợp lệ:" + +msgid "The name is not allowed to be empty." +msgstr "Tên không được để trống." + +msgid "The name is not allowed to start with space character." +msgstr "Tên không được bắt đầu bằng ký tự khoảng trắng." + +msgid "The name is not allowed to end with space character." +msgstr "Tên không được kết thúc bằng ký tự khoảng trắng." + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Liên kết với mã Pin" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + +msgid "Printing Progress" +msgstr "Tiến trình in" + +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "Dừng" + +msgid "Layer: N/A" +msgstr "Lớp: N/A" + +msgid "Clear" +msgstr "Xóa" + +msgid "" +"You have completed printing the mall model, \n" +"but the synchronization of rating information has failed." +msgstr "" +"Bạn đã hoàn thành in model mall, \n" +"nhưng đồng bộ thông tin đánh giá đã thất bại." + +msgid "How do you like this printing file?" +msgstr "Bạn thấy file in này như thế nào?" + +msgid "" +"(The model has already been rated. Your rating will overwrite the previous " +"rating.)" +msgstr "" +"(Model đã được đánh giá. Đánh giá của bạn sẽ ghi đè đánh giá trước đó.)" + +msgid "Rate" +msgstr "Đánh giá" + +msgid "Camera" +msgstr "Camera" + +msgid "Storage" +msgstr "Bộ nhớ" + +msgid "Camera Setting" +msgstr "Cài đặt camera" + +msgid "Switch Camera View" +msgstr "Chuyển chế độ xem camera" + +msgid "Control" +msgstr "Điều khiển" + +msgid "Printer Parts" +msgstr "Phụ kiện máy in" + +msgid "Print Options" +msgstr "Tùy chọn in" + +msgid "Lamp" +msgstr "Đèn" + +msgid "Bed" +msgstr "Bàn in" + +msgid "Debug Info" +msgstr "Thông tin gỡ lỗi" + +msgid "Filament loading..." +msgstr "" + +msgid "No Storage" +msgstr "Không có bộ nhớ" + +msgid "Storage Abnormal" +msgstr "Bộ nhớ bất thường" + +msgid "Cancel print" +msgstr "Hủy in" + +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "Máy in đang bận với công việc in khác." + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" + +msgid "Downloading..." +msgstr "Đang tải xuống..." + +msgid "Cloud Slicing..." +msgstr "Đang slice trên Cloud..." + +#, c-format, boost-format +msgid "In Cloud Slicing Queue, there are %s tasks ahead." +msgstr "Trong hàng đợi Slice trên Cloud, có %s tác vụ phía trước." + +#, c-format, boost-format +msgid "Layer: %s" +msgstr "Lớp: %s" + +#, c-format, boost-format +msgid "Layer: %d/%d" +msgstr "Lớp: %d/%d" + +msgid "" +"Please heat the nozzle to above 170°C before loading or unloading filament." +msgstr "" +"Vui lòng làm nóng đầu phun lên trên 170°C trước khi nạp hoặc tháo filament." + +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" + +msgid "Please select an AMS slot before calibration" +msgstr "Vui lòng chọn một khe AMS trước khi hiệu chỉnh" + +msgid "" +"Cannot read filament info: the filament is loaded to the tool head,please " +"unload the filament and try again." +msgstr "" +"Không thể đọc thông tin filament: filament đã được nạp vào đầu công cụ, vui " +"lòng tháo filament và thử lại." + +msgid "This only takes effect during printing" +msgstr "Chỉ có hiệu lực trong khi in" + +msgid "Silent" +msgstr "Im lặng" + +msgid "Standard" +msgstr "Tiêu chuẩn" + +msgid "Sport" +msgstr "Thể thao" + +msgid "Ludicrous" +msgstr "Cực nhanh" + +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" + +msgid "Rate the Print Profile" +msgstr "Đánh giá cấu hình in" + +msgid "Comment" +msgstr "Bình luận" + +msgid "Rate this print" +msgstr "Đánh giá lần in này" + +msgid "Add Photo" +msgstr "Thêm ảnh" + +msgid "Delete Photo" +msgstr "Xóa ảnh" + +msgid "Submit" +msgstr "Gửi" + +msgid "Please click on the star first." +msgstr "Vui lòng nhấp vào ngôi sao trước." + +msgid "Get oss config failed." +msgstr "Lấy cấu hình oss thất bại." + +msgid "Upload Pictures" +msgstr "Tải ảnh lên" + +msgid "Number of images successfully uploaded" +msgstr "Số lượng ảnh được tải lên thành công" + +msgid " upload failed" +msgstr " tải lên thất bại" + +msgid " upload config prase failed\n" +msgstr " phân tích cấu hình tải lên thất bại\n" + +msgid " No corresponding storage bucket\n" +msgstr " Không có bucket lưu trữ tương ứng\n" + +msgid " cannot be opened\n" +msgstr " không thể mở\n" + +msgid "" +"The following issues occurred during the process of uploading images. Do you " +"want to ignore them?\n" +"\n" +msgstr "" +"Các vấn đề sau đã xảy ra trong quá trình tải ảnh lên. Bạn có muốn bỏ qua " +"chúng?\n" +"\n" + +msgid "info" +msgstr "thông tin" + +msgid "Synchronizing the printing results. Please retry a few seconds later." +msgstr "Đang đồng bộ kết quả in. Vui lòng thử lại sau vài giây." + +msgid "Upload failed\n" +msgstr "Tải lên thất bại\n" + +msgid "obtaining instance_id failed\n" +msgstr "lấy instance_id thất bại\n" + +msgid "" +"Your comment result cannot be uploaded due to the following reasons:\n" +"\n" +" error code: " +msgstr "" +"Kết quả bình luận của bạn không thể tải lên do các lý do sau:\n" +"\n" +" mã lỗi: " + +msgid "error message: " +msgstr "thông báo lỗi: " + +msgid "" +"\n" +"\n" +"Would you like to redirect to the webpage to give a rating?" +msgstr "" +"\n" +"\n" +"Bạn có muốn chuyển hướng đến trang web để đánh giá?" + +msgid "" +"Some of your images failed to upload. Would you like to redirect to the " +"webpage to give a rating?" +msgstr "" +"Một số ảnh của bạn không thể tải lên. Bạn có muốn chuyển hướng đến trang web " +"để đánh giá?" + +msgid "You can select up to 16 images." +msgstr "Bạn có thể chọn tối đa 16 ảnh." + +msgid "" +"At least one successful print record of this print profile is required \n" +"to give a positive rating (4 or 5 stars)." +msgstr "" +"Cần ít nhất một bản ghi in thành công của cấu hình in này \n" +"để đưa ra đánh giá tích cực (4 hoặc 5 sao)." + +msgid "Status" +msgstr "Trạng thái" + +msgctxt "Firmware" +msgid "Update" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" + +msgid "Don't show again" +msgstr "Không hiển thị lại" + +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + +#, c-format, boost-format +msgid "%s error" +msgstr "%s lỗi" + +#, c-format, boost-format +msgid "%s has encountered an error" +msgstr "%s đã gặp lỗi" + +#, c-format, boost-format +msgid "%s warning" +msgstr "%s cảnh báo" + +#, c-format, boost-format +msgid "%s has a warning" +msgstr "%s có cảnh báo" + +#, c-format, boost-format +msgid "%s info" +msgstr "%s thông tin" + +#, c-format, boost-format +msgid "%s information" +msgstr "%s thông tin" + +msgid "Skip" +msgstr "Bỏ qua" + +#, fuzzy +msgid "Newer 3MF version" +msgstr "Phiên bản 3MF mới hơn" + +#, fuzzy +msgid "" +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " +"version." +msgstr "" +"Phiên bản file 3MF đang ở chế độ Beta và mới hơn phiên bản Snapmaker Orca hiện " +"tại." + +msgid "If you would like to try Snapmaker Orca Beta, you may click to" +msgstr "Nếu bạn muốn dùng thử Snapmaker Orca Beta, bạn có thể nhấp để" + +msgid "Download Beta Version" +msgstr "Tải phiên bản Beta" + +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "Phiên bản file 3MF mới hơn phiên bản Snapmaker Orca hiện tại." + +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." +msgstr "" +"Cập nhật Snapmaker Orca của bạn có thể kích hoạt tất cả chức năng trong file " +"3MF." + +msgid "Current Version: " +msgstr "Phiên bản hiện tại: " + +msgid "Latest Version: " +msgstr "Phiên bản mới nhất: " + +msgctxt "Software" +msgid "Update" +msgstr "" + +msgid "Not for now" +msgstr "Không phải bây giờ" + +msgid "Server Exception" +msgstr "Lỗi máy chủ" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "" +"Máy chủ không thể phản hồi. Vui lòng nhấp vào liên kết bên dưới để kiểm tra " +"trạng thái máy chủ." + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "" +"Nếu máy chủ đang ở trạng thái lỗi, bạn có thể tạm thời sử dụng in ngoại " +"tuyến hoặc in mạng cục bộ." + +msgid "How to use LAN only mode" +msgstr "Cách sử dụng chế độ chỉ LAN" + +msgid "Don't show this dialog again" +msgstr "Không hiển thị hộp thoại này nữa" + +msgid "3D Mouse disconnected." +msgstr "Chuột 3D đã ngắt kết nối." + +msgid "Configuration can update now." +msgstr "Cấu hình có thể cập nhật ngay bây giờ." + +msgid "Detail." +msgstr "Chi tiết." + +msgid "Integration was successful." +msgstr "Tích hợp thành công." + +msgid "Integration failed." +msgstr "Tích hợp thất bại." + +msgid "Undo integration was successful." +msgstr "Hoàn tác tích hợp thành công." + +msgid "New network plug-in available." +msgstr "Có plug-in mạng mới." + +msgid "Details" +msgstr "Chi tiết" + +msgid "New printer config available." +msgstr "Có cấu hình máy in mới." + +msgid "Wiki" +msgstr "Wiki" + +msgid "Undo integration failed." +msgstr "Hoàn tác tích hợp thất bại." + +msgid "Exporting." +msgstr "Đang xuất." + +msgid "Software has New version." +msgstr "Phần mềm có phiên bản mới." + +msgid "Goto download page." +msgstr "Đến trang tải xuống." + +msgid "Open Folder." +msgstr "Mở thư mục." + +msgid "Safely remove hardware." +msgstr "Tháo phần cứng an toàn." + +#, c-format, boost-format +msgid "%1$d Object has custom supports." +msgid_plural "%1$d Objects have custom supports." +msgstr[0] "%1$d đối tượng có support tùy chỉnh." + +#, c-format, boost-format +msgid "%1$d Object has color painting." +msgid_plural "%1$d Objects have color painting." +msgstr[0] "%1$d đối tượng có tô màu." + +#, c-format, boost-format +msgid "%1$d object was loaded as a part of cut object." +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d đối tượng đã được tải như một phần của đối tượng cắt." + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d đối tượng đã được tải với tô fuzzy skin." + +msgid "ERROR" +msgstr "LỖI" + +msgid "COMPLETED" +msgstr "ĐÃ HOÀN THÀNH" + +msgid "CANCELED" +msgstr "ĐÃ HỦY" + +msgid "Cancel upload" +msgstr "Hủy tải lên" + +msgid "Jump to" +msgstr "Nhảy đến" + +msgid "Error:" +msgstr "Lỗi:" + +msgid "Warning:" +msgstr "Cảnh báo:" + +msgid "Exported successfully" +msgstr "Xuất thành công" + +msgid "Model file downloaded." +msgstr "File model đã được tải xuống." + +msgid "Serious warning:" +msgstr "Cảnh báo nghiêm trọng:" + +msgid " (Repair)" +msgstr " (Sửa chữa)" + +msgid " Click here to install it." +msgstr " Nhấp vào đây để cài đặt." + +msgid "WARNING:" +msgstr "CẢNH BÁO:" + +msgid "Your model needs support! Please enable support material." +msgstr "Model của bạn cần support! Vui lòng bật vật liệu support." + +msgid "G-code path overlap" +msgstr "Đường dẫn G-code chồng lấp" + +msgid "Support painting" +msgstr "Tô support" + +msgid "Color painting" +msgstr "Tô màu" + +msgid "Cut connectors" +msgstr "Cắt connector" + +msgid "Layers" +msgstr "Lớp" + +msgid "Range" +msgstr "Phạm vi" + +msgid "" +"The application cannot run normally because OpenGL version is lower than " +"2.0.\n" +msgstr "" +"Ứng dụng không thể chạy bình thường vì phiên bản OpenGL thấp hơn 2.0.\n" + +msgid "Please upgrade your graphics card driver." +msgstr "Vui lòng nâng cấp driver card đồ họa của bạn." + +msgid "Unsupported OpenGL version" +msgstr "Phiên bản OpenGL không được hỗ trợ" + +#, c-format, boost-format +msgid "" +"Unable to load shaders:\n" +"%s" +msgstr "" +"Không thể tải shader:\n" +"%s" + +msgid "Error loading shaders" +msgstr "Lỗi tải shader" + +msgctxt "Layers" +msgid "Top" +msgstr "Trên" + +msgctxt "Layers" +msgid "Bottom" +msgstr "Dưới" + +msgid "Enable detection of build plate position" +msgstr "Bật phát hiện vị trí bàn in" + +msgid "" +"The localization tag of build plate is detected, and printing is paused if " +"the tag is not in predefined range." +msgstr "" +"Thẻ định vị của bàn in được phát hiện, và việc in sẽ tạm dừng nếu thẻ không " +"nằm trong phạm vi được xác định trước." + +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "Bật giám sát in bằng AI" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "Phát hiện đầu phun bị vón cục" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + +msgid "First Layer Inspection" +msgstr "Kiểm tra lớp đầu tiên" + +msgid "Auto-recovery from step loss" +msgstr "Tự động phục hồi từ mất bước" + +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + +msgid "Allow Prompt Sound" +msgstr "Cho phép âm thanh nhắc nhở" + +msgid "Filament Tangle Detect" +msgstr "Phát hiện filament rối" + +msgid "Check if the nozzle is clumping by filament or other foreign objects." +msgstr "Kiểm tra xem đầu phun có bị vón cục bởi filament hoặc vật lạ khác." + +msgid "Nozzle Type" +msgstr "Loại đầu phun" + +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" + +msgid "Hardened Steel" +msgstr "Thép cứng" + +msgid "Stainless Steel" +msgstr "Thép không gỉ" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." +msgstr "" + +msgid "Global" +msgstr "Toàn cục" + +msgid "Objects" +msgstr "Đối tượng" + +msgid "Advance" +msgstr "Nâng cao" + +msgid "Compare presets" +msgstr "So sánh preset" + +msgid "View all object's settings" +msgstr "Xem tất cả cài đặt của đối tượng" + +msgid "Material settings" +msgstr "Cài đặt vật liệu" + +msgid "Remove current plate (if not last one)" +msgstr "Xóa bản hiện tại (nếu không phải bản cuối)" + +msgid "Auto orient objects on current plate" +msgstr "Tự động định hướng đối tượng trên bản hiện tại" + +msgid "Arrange objects on current plate" +msgstr "Sắp xếp đối tượng trên bản hiện tại" + +msgid "Unlock current plate" +msgstr "Mở khóa bản hiện tại" + +msgid "Lock current plate" +msgstr "Khóa bản hiện tại" + +msgid "Filament grouping" +msgstr "" + +msgid "Edit current plate name" +msgstr "Chỉnh sửa tên bản hiện tại" + +msgid "Move plate to the front" +msgstr "Di chuyển bản ra phía trước" + +msgid "Customize current plate" +msgstr "Tùy chỉnh bản hiện tại" + +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + +#, boost-format +msgid " plate %1%:" +msgstr " bản %1%:" + +msgid "Invalid name, the following characters are not allowed:" +msgstr "Tên không hợp lệ, các ký tự sau không được phép:" + +msgid "Sliced Info" +msgstr "Thông tin slice" + +msgid "Used Filament (m)" +msgstr "Filament đã dùng (m)" + +msgid "Used Filament (mm³)" +msgstr "Filament đã dùng (mm³)" + +msgid "Used Filament (g)" +msgstr "Filament đã dùng (g)" + +msgid "Used Materials" +msgstr "Vật liệu đã dùng" + +msgid "Estimated time" +msgstr "Thời gian ước tính" + +msgid "Filament changes" +msgstr "Thay filament" + +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + +msgid "Click to edit preset" +msgstr "Nhấp để chỉnh sửa preset" + +msgid "Connection" +msgstr "Kết nối" + +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" + +msgid "Flushing volumes" +msgstr "Khối lượng xả" + +msgid "Add one filament" +msgstr "Thêm một filament" + +msgid "Remove last filament" +msgstr "Xóa filament cuối cùng" + +msgid "Synchronize filament list from AMS" +msgstr "Đồng bộ danh sách filament từ AMS" + +msgid "Set filaments to use" +msgstr "Đặt filament để sử dụng" + +msgid "Search plate, object and part." +msgstr "Tìm kiếm bản, đối tượng và phần." + +msgid "Pellets" +msgstr "Viên" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." +msgstr "" + +msgid "There are no compatible filaments, and sync is not performed." +msgstr "Không có filament tương thích, và đồng bộ không được thực hiện." + +msgid "Sync filaments with AMS" +msgstr "Đồng bộ filament với AMS" + +msgid "" +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." +msgstr "" + +#, boost-format +msgid "Do you want to save changes to \"%1%\"?" +msgstr "Bạn có muốn lưu thay đổi vào \"%1%\"?" + +#, c-format, boost-format +msgid "" +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." +msgstr "" +"Ngắt kết nối thành công. Thiết bị %s (%s) giờ có thể được tháo an toàn khỏi " +"máy tính." + +#, c-format, boost-format +msgid "Ejecting of device %s (%s) has failed." +msgstr "Tháo thiết bị %s (%s) đã thất bại." + +msgid "Previous unsaved project detected, do you want to restore it?" +msgstr "Phát hiện dự án chưa lưu trước đó, bạn có muốn khôi phục nó?" + +msgid "Restore" +msgstr "Khôi phục" + +msgid "" +"The current hot bed temperature is relatively high. The nozzle may be " +"clogged when printing this filament in a closed enclosure. Please open the " +"front door and/or remove the upper glass." +msgstr "" +"Nhiệt độ bàn nóng hiện tại tương đối cao. Đầu phun có thể bị tắc khi in " +"filament này trong vỏ kín. Vui lòng mở cửa trước và/hoặc tháo kính trên." + +msgid "" +"The nozzle hardness required by the filament is higher than the default " +"nozzle hardness of the printer. Please replace the hardened nozzle or " +"filament, otherwise, the nozzle will be attrited or damaged." +msgstr "" +"Độ cứng đầu phun yêu cầu bởi filament cao hơn độ cứng đầu phun mặc định của " +"máy in. Vui lòng thay thế đầu phun cứng hoặc filament, nếu không, đầu phun " +"sẽ bị mài mòn hoặc hư hỏng." + +msgid "" +"Enabling traditional timelapse photography may cause surface imperfections. " +"It is recommended to change to smooth mode." +msgstr "" +"Bật chụp ảnh timelapse truyền thống có thể gây ra khuyết điểm bề mặt. Khuyến " +"nghị chuyển sang chế độ mượt." + +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + +msgid "Expand sidebar" +msgstr "Mở rộng thanh bên" + +msgid "Collapse sidebar" +msgstr "Thu gọn thanh bên" + +msgid "Tab" +msgstr "Tab" + +#, c-format, boost-format +msgid "Loading file: %s" +msgstr "Đang tải file: %s" + +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "File 3MF không được hỗ trợ bởi Snapmaker Orca, chỉ tải dữ liệu hình học." + +#, fuzzy +msgid "Load 3MF" +msgstr "Tải 3MF" + +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" +"Dự án này được tạo với Snapmaker Orca 2.3.1-alpha và sử dụng cài đặt mẫu xoay " +"infill có thể không hoạt động đúng với mẫu infill hiện tại của bạn. Điều này " +"có thể dẫn đến support yếu hoặc vấn đề chất lượng in." + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" +"Bạn có muốn Snapmaker Orca tự động sửa lỗi này bằng cách xóa cài đặt mẫu xoay " +"không?" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "" +"Phiên bản 3MF %s mới hơn phiên bản %s của %s, tìm thấy các khóa không được " +"nhận dạng sau:" + +msgid "You'd better upgrade your software.\n" +msgstr "Bạn nên nâng cấp phần mềm của mình.\n" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." +msgstr "" +"Phiên bản 3MF %s mới hơn phiên bản %s của %s, khuyến nghị nâng cấp phần mềm " +"của bạn." + +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "Tìm thấy giá trị không hợp lệ trong file 3MF:" + +msgid "Please correct them in the param tabs" +msgstr "Vui lòng sửa chúng trong tab tham số" + +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "File 3MF có G-code đã chỉnh sửa sau trong preset filament hoặc máy in:" + +msgid "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "" +"Vui lòng xác nhận tất cả G-code đã chỉnh sửa đều an toàn để ngăn chặn mọi hư " +"hại cho máy!" + +msgid "Modified G-code" +msgstr "G-code đã chỉnh sửa" + +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "File 3MF có các preset filament hoặc máy in tùy chỉnh sau:" + +msgid "" +"Please confirm that the G-code within these presets is safe to prevent any " +"damage to the machine!" +msgstr "" +"Vui lòng xác nhận G-code trong các preset này an toàn để ngăn chặn mọi hư " +"hại cho máy!" + +msgid "Customized Preset" +msgstr "Preset tùy chỉnh" + +msgid "Name of components inside STEP file is not UTF8 format!" +msgstr "Tên của các thành phần bên trong file STEP không phải định dạng UTF8!" + +msgid "The name may show garbage characters!" +msgstr "Tên có thể hiển thị ký tự rác!" + +msgid "Remember my choice." +msgstr "Nhớ lựa chọn của tôi." + +#, boost-format +msgid "Failed loading file \"%1%\". An invalid configuration was found." +msgstr "Không thể tải file \"%1%\". Tìm thấy cấu hình không hợp lệ." + +msgid "Objects with zero volume removed" +msgstr "Đã xóa các đối tượng có thể tích bằng không" + +msgid "The volume of the object is zero" +msgstr "Thể tích của đối tượng bằng không" + +#, c-format, boost-format +msgid "" +"The object from file %s is too small, and maybe in meters or inches.\n" +" Do you want to scale to millimeters?" +msgstr "" +"Đối tượng từ file %s quá nhỏ, và có thể đang ở đơn vị mét hoặc inch.\n" +" Bạn có muốn chuyển đổi sang milimét?" + +msgid "Object too small" +msgstr "Đối tượng quá nhỏ" + +msgid "" +"This file contains several objects positioned at multiple heights.\n" +"Instead of considering them as multiple objects, should \n" +"the file be loaded as a single object having multiple parts?" +msgstr "" +"File này chứa nhiều đối tượng được đặt ở nhiều chiều cao.\n" +"Thay vì coi chúng là nhiều đối tượng, có nên \n" +"tải file như một đối tượng đơn có nhiều phần?" + +msgid "Multi-part object detected" +msgstr "Phát hiện đối tượng nhiều phần" + +msgid "Load these files as a single object with multiple parts?\n" +msgstr "Tải các file này như một đối tượng đơn với nhiều phần?\n" + +msgid "Object with multiple parts was detected" +msgstr "Đã phát hiện đối tượng với nhiều phần" + +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + +msgid "The file does not contain any geometry data." +msgstr "File không chứa bất kỳ dữ liệu hình học nào." + +msgid "" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" +msgstr "" +"Đối tượng của bạn có vẻ quá lớn, bạn có muốn thu nhỏ nó để vừa với bàn in tự " +"động?" + +msgid "Object too large" +msgstr "Đối tượng quá lớn" + +msgid "Export STL file:" +msgstr "Xuất file STL:" + +msgid "Export AMF file:" +msgstr "Xuất file AMF:" + +msgid "Save file as:" +msgstr "Lưu file dưới dạng:" + +msgid "Export OBJ file:" +msgstr "Xuất file OBJ:" + +#, c-format, boost-format +msgid "" +"The file %s already exists\n" +"Do you want to replace it?" +msgstr "" +"File %s đã tồn tại\n" +"Bạn có muốn thay thế nó?" + +msgid "Confirm Save As" +msgstr "Xác nhận lưu dưới dạng" + +msgid "Delete object which is a part of cut object" +msgstr "Xóa đối tượng là một phần của đối tượng cắt" + +msgid "" +"You try to delete an object which is a part of a cut object.\n" +"This action will break a cut correspondence.\n" +"After that model consistency can't be guaranteed." +msgstr "" +"Bạn đang cố xóa một đối tượng là một phần của đối tượng cắt.\n" +"Hành động này sẽ phá vỡ sự tương ứng cắt.\n" +"Sau đó tính nhất quán của model không thể được đảm bảo." + +msgid "The selected object couldn't be split." +msgstr "Đối tượng đã chọn không thể được tách." + +msgid "Another export job is running." +msgstr "Một tác vụ xuất khác đang chạy." + +msgid "Unable to replace with more than one volume" +msgstr "Không thể thay thế bằng nhiều hơn một khối" + +msgid "Error during replace" +msgstr "Lỗi trong quá trình thay thế" + +msgid "Replace from:" +msgstr "Thay thế từ:" + +msgid "Select a new file" +msgstr "Chọn file mới" + +msgid "File for the replace wasn't selected" +msgstr "Chưa chọn file để thay thế" + +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + +msgid "Please select a file" +msgstr "Vui lòng chọn một file" + +msgid "Do you want to replace it" +msgstr "Bạn có muốn thay thế nó" + +msgid "Message" +msgstr "Tin nhắn" + +msgid "Reload from:" +msgstr "Tải lại từ:" + +msgid "Unable to reload:" +msgstr "Không thể tải lại:" + +msgid "Error during reload" +msgstr "Lỗi trong quá trình tải lại" + +msgid "There are warnings after slicing models:" +msgstr "Có cảnh báo sau khi slice model:" + +msgid "warnings" +msgstr "cảnh báo" + +msgid "Invalid data" +msgstr "Dữ liệu không hợp lệ" + +msgid "Slicing Canceled" +msgstr "Đã hủy slice" + +#, c-format, boost-format +msgid "Slicing Plate %d" +msgstr "Đang slice bản %d" + +msgid "Please resolve the slicing errors and publish again." +msgstr "Vui lòng giải quyết các lỗi slice và xuất bản lại." + +msgid "" +"Network Plug-in is not detected. Network related features are unavailable." +msgstr "" +"Không phát hiện plug-in mạng. Các tính năng liên quan đến mạng không khả " +"dụng." + +msgid "" +"Preview only mode:\n" +"The loaded file contains G-code only, cannot enter the Prepare page." +msgstr "" +"Chế độ chỉ xem trước:\n" +"File đã tải chỉ chứa G-code, không thể vào trang Chuẩn bị." + +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + +msgid "You can keep the modified presets to the new project or discard them" +msgstr "" +"Bạn có thể giữ các preset đã chỉnh sửa cho dự án mới hoặc loại bỏ chúng" + +msgid "Creating a new project" +msgstr "Đang tạo dự án mới" + +msgid "Load project" +msgstr "Tải dự án" + +msgid "" +"Failed to save the project.\n" +"Please check whether the folder exists online or if other programs open the " +"project file." +msgstr "" +"Không thể lưu dự án.\n" +"Vui lòng kiểm tra xem thư mục có tồn tại trực tuyến hoặc các chương trình " +"khác có mở file dự án không." + +msgid "Save project" +msgstr "Lưu dự án" + +msgid "Importing Model" +msgstr "Đang nhập model" + +msgid "prepare 3MF file..." +msgstr "chuẩn bị file 3MF..." + +msgid "Download failed, unknown file format." +msgstr "Tải xuống thất bại, định dạng file không xác định." + +msgid "downloading project..." +msgstr "đang tải dự án xuống..." + +msgid "Download failed, File size exception." +msgstr "Tải xuống thất bại, kích thước file bất thường." + +#, c-format, boost-format +msgid "Project downloaded %d%%" +msgstr "Dự án đã tải xuống %d%%" + +msgid "" +"Importing to Snapmaker Orca failed. Please download the file and manually " +"import it." +msgstr "" +"Nhập vào Snapmaker Orca thất bại. Vui lòng tải file xuống và nhập thủ công." + +msgid "INFO:" +msgstr "THÔNG TIN:" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "" +"Không có gia tốc được cung cấp để hiệu chỉnh. Sử dụng giá trị gia tốc mặc " +"định " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "" +"Không có tốc độ được cung cấp để hiệu chỉnh. Sử dụng tốc độ tối ưu mặc định " + +msgid "Import SLA archive" +msgstr "Nhập lưu trữ SLA" + +msgid "The selected file" +msgstr "File đã chọn" + +msgid "does not contain valid G-code." +msgstr "không chứa G-code hợp lệ." + +msgid "Error occurs while loading G-code file" +msgstr "Lỗi xảy ra khi tải file G-code" + +#. TRN %1% is archive path +#, boost-format +msgid "Loading of a ZIP archive on path %1% has failed." +msgstr "Tải lưu trữ ZIP trên đường dẫn %1% đã thất bại." + +#. TRN: First argument = path to file, second argument = error description +#, boost-format +msgid "Failed to unzip file to %1%: %2%" +msgstr "Không thể giải nén file vào %1%: %2%" + +#, boost-format +msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." +msgstr "Không tìm thấy file đã giải nén tại %1%. Giải nén file đã thất bại." + +msgid "Drop project file" +msgstr "Thả file dự án" + +msgid "Please select an action" +msgstr "Vui lòng chọn một hành động" + +msgid "Open as project" +msgstr "Mở như dự án" + +msgid "Import geometry only" +msgstr "Chỉ nhập hình học" + +msgid "Only one G-code file can be opened at the same time." +msgstr "Chỉ có thể mở một file G-code tại một thời điểm." + +msgid "G-code loading" +msgstr "Đang tải G-code" + +msgid "G-code files cannot be loaded with models together!" +msgstr "File G-code không thể được tải cùng với model!" + +msgid "Cannot add models when in preview mode!" +msgstr "Không thể thêm model khi đang ở chế độ xem trước!" + +msgid "All objects will be removed, continue?" +msgstr "Tất cả đối tượng sẽ bị xóa, tiếp tục?" + +msgid "The current project has unsaved changes, save it before continue?" +msgstr "Dự án hiện tại có thay đổi chưa lưu, lưu trước khi tiếp tục?" + +msgid "Number of copies:" +msgstr "Số lượng bản sao:" + +msgid "Copies of the selected object" +msgstr "Bản sao của đối tượng đã chọn" + +msgid "Save G-code file as:" +msgstr "Lưu file G-code dưới dạng:" + +msgid "Save SLA file as:" +msgstr "Lưu file SLA dưới dạng:" + +msgid "The provided file name is not valid." +msgstr "Tên file được cung cấp không hợp lệ." + +msgid "The following characters are not allowed by a FAT file system:" +msgstr "Các ký tự sau không được phép bởi hệ thống file FAT:" + +msgid "Save Sliced file as:" +msgstr "Lưu file đã slice dưới dạng:" + +#, c-format, boost-format +msgid "" +"The file %s has been sent to the printer's storage space and can be viewed " +"on the printer." +msgstr "" +"File %s đã được gửi đến không gian lưu trữ của máy in và có thể được xem " +"trên máy in." + +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + +msgid "" +"Unable to perform boolean operation on model meshes. Only positive parts " +"will be kept. You may fix the meshes and try again." +msgstr "" +"Không thể thực hiện thao tác boolean trên mesh model. Chỉ các phần dương sẽ " +"được giữ lại. Bạn có thể sửa mesh và thử lại." + +#, boost-format +msgid "Reason: part \"%1%\" is empty." +msgstr "Lý do: phần \"%1%\" trống." + +#, boost-format +msgid "Reason: part \"%1%\" does not bound a volume." +msgstr "Lý do: phần \"%1%\" không giới hạn thể tích." + +#, boost-format +msgid "Reason: part \"%1%\" has self intersection." +msgstr "Lý do: phần \"%1%\" có giao nhau tự thân." + +#, boost-format +msgid "Reason: \"%1%\" and another part have no intersection." +msgstr "Lý do: \"%1%\" và phần khác không có giao điểm." + +msgid "" +"Unable to perform boolean operation on model meshes. Only positive parts " +"will be exported." +msgstr "" +"Không thể thực hiện thao tác boolean trên mesh model. Chỉ các phần dương sẽ " +"được xuất." + +msgid "Is the printer ready? Is the print sheet in place, empty and clean?" +msgstr "Máy in đã sẵn sàng chưa? Bàn in đã đúng vị trí, trống và sạch chưa?" + +msgid "Upload and Print" +msgstr "Tải lên và in" + +msgid "Abnormal print file data. Please slice again" +msgstr "Dữ liệu file in bất thường. Vui lòng slice lại" + +msgid "" +"Print By Object: \n" +"Suggest to use auto-arrange to avoid collisions when printing." +msgstr "" +"In theo đối tượng: \n" +"Khuyến nghị sử dụng sắp xếp tự động để tránh va chạm khi in." + +msgid "Send G-code" +msgstr "Gửi G-code" + +msgid "Send to printer" +msgstr "Gửi đến máy in" + +msgid "Custom supports and color painting were removed before repairing." +msgstr "Support tùy chỉnh và tô màu đã được xóa trước khi sửa chữa." + +msgid "Optimize Rotation" +msgstr "Tối ưu hóa xoay" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" + +msgid "Plate Settings" +msgstr "Cài đặt bản" + +#, boost-format +msgid "Number of currently selected parts: %1%\n" +msgstr "Số lượng phần đã chọn hiện tại: %1%\n" + +#, boost-format +msgid "Number of currently selected objects: %1%\n" +msgstr "Số lượng đối tượng đã chọn hiện tại: %1%\n" + +#, boost-format +msgid "Part name: %1%\n" +msgstr "Tên phần: %1%\n" + +#, boost-format +msgid "Object name: %1%\n" +msgstr "Tên đối tượng: %1%\n" + +#, boost-format +msgid "Size: %1% x %2% x %3% in\n" +msgstr "Kích thước: %1% x %2% x %3% in\n" + +#, boost-format +msgid "Size: %1% x %2% x %3% mm\n" +msgstr "Kích thước: %1% x %2% x %3% mm\n" + +#, boost-format +msgid "Volume: %1% in³\n" +msgstr "Thể tích: %1% in³\n" + +#, boost-format +msgid "Volume: %1% mm³\n" +msgstr "Thể tích: %1% mm³\n" + +#, boost-format +msgid "Triangles: %1%\n" +msgstr "Tam giác: %1%\n" + +msgid "" +"\"Fix Model\" feature is currently only on Windows. Please repair the model " +"on Snapmaker Orca(windows) or CAD softwares." +msgstr "" +"Tính năng \"Sửa model\" hiện chỉ có trên Windows. Vui lòng sửa model trên " +"Snapmaker Orca(windows) hoặc phần mềm CAD." + +#, c-format, boost-format +msgid "" +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"Bản %d: %s không được khuyến nghị sử dụng để in filament %s (%s). Nếu bạn " +"vẫn muốn thực hiện công việc in này, vui lòng đặt nhiệt độ bàn của filament " +"này khác không." + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + +msgid "Switching the language requires application restart.\n" +msgstr "Chuyển đổi ngôn ngữ yêu cầu khởi động lại ứng dụng.\n" + +msgid "Do you want to continue?" +msgstr "Bạn có muốn tiếp tục?" + +msgid "Language selection" +msgstr "Chọn ngôn ngữ" + +msgid "Switching application language while some presets are modified." +msgstr "" +"Đang chuyển đổi ngôn ngữ ứng dụng trong khi một số preset đã được chỉnh sửa." + +msgid "Changing application language" +msgstr "Đang thay đổi ngôn ngữ ứng dụng" + +msgid "Asia-Pacific" +msgstr "Châu Á-Thái Bình Dương" + +msgid "China" +msgstr "Trung Quốc" + +msgid "Europe" +msgstr "Châu Âu" + +msgid "North America" +msgstr "Bắc Mỹ" + +msgid "Others" +msgstr "Khác" + +msgid "Changing the region will log out your account.\n" +msgstr "Thay đổi khu vực sẽ đăng xuất tài khoản của bạn.\n" + +msgid "Region selection" +msgstr "Chọn khu vực" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "Chu kỳ sao lưu tính bằng giây." + +msgid "Bed Temperature Difference Warning" +msgstr "" + +msgid "" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" + +msgid "Browse" +msgstr "Duyệt" + +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "Chọn thư mục tải xuống" + +msgid "Associate" +msgstr "Liên kết" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "với Snapmaker Orca để Orca có thể mở model từ" + +msgid "Current Association: " +msgstr "Liên kết hiện tại: " + +msgid "Current Instance" +msgstr "Phiên bản hiện tại" + +msgid "Current Instance Path: " +msgstr "Đường dẫn phiên bản hiện tại: " + +msgid "General" +msgstr "Chung" + +msgid "Metric" +msgstr "Hệ mét" + +msgid "Imperial" +msgstr "Hệ Anh" + +msgid "Units" +msgstr "Đơn vị" + +msgid "Home" +msgstr "Trang chủ" + +msgid "Default page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "Đặt trang được mở khi khởi động." + +msgid "Enable dark mode" +msgstr "" + +msgid "Allow only one Snapmaker Orca instance" +msgstr "Chỉ cho phép một phiên bản Snapmaker Orca" + +msgid "" +"On OSX there is always only one instance of app running by default. However " +"it is allowed to run multiple instances of same app from the command line. " +"In such case this settings will allow only one instance." +msgstr "" +"Trên OSX luôn chỉ có một phiên bản ứng dụng chạy theo mặc định. Tuy nhiên có " +"thể chạy nhiều phiên bản của cùng một ứng dụng từ dòng lệnh. Trong trường " +"hợp đó cài đặt này sẽ chỉ cho phép một phiên bản." + +msgid "" +"If this is enabled, when starting Snapmaker Orca and another instance of the " +"same Snapmaker Orca is already running, that instance will be reactivated " +"instead." +msgstr "" +"Nếu được bật, khi khởi động Snapmaker Orca và một phiên bản khác của cùng " +"Snapmaker Orca đang chạy, phiên bản đó sẽ được kích hoạt lại thay thế." + +msgid "Show splash screen" +msgstr "Hiển thị màn hình khởi động" + +msgid "Show the splash screen during startup." +msgstr "Hiển thị màn hình khởi động trong khi khởi động." + +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "Tải tất cả" + +msgid "Ask When Relevant" +msgstr "Hỏi khi liên quan" + +msgid "Always Ask" +msgstr "Luôn hỏi" + +msgid "Load Geometry Only" +msgstr "Chỉ tải hình học" + +msgid "Load behaviour" +msgstr "" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "Có nên tải cài đặt máy in/filament/quy trình khi mở file 3MF?" + +msgid "Maximum recent files" +msgstr "Số file gần đây tối đa" + +msgid "Maximum count of recent files" +msgstr "Số lượng tối đa file gần đây" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "" + +msgid "Show options when importing STEP file" +msgstr "" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "" +"Nếu được bật, hộp thoại cài đặt tham số sẽ xuất hiện trong quá trình nhập " +"file STEP." + +msgid "Auto backup" +msgstr "" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "Sao lưu dự án của bạn định kỳ để khôi phục từ sự cố thỉnh thoảng." + +msgid "Preset" +msgstr "Cài đặt sẵn" + +msgid "Remember printer configuration" +msgstr "Nhớ cấu hình máy in" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "" +"Nếu được bật, Orca sẽ nhớ và chuyển cấu hình filament/quy trình cho mỗi máy " +"in tự động." + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "" +"Với tùy chọn này được bật, bạn có thể gửi tác vụ đến nhiều thiết bị cùng lúc " +"và quản lý nhiều thiết bị." + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "Tất cả" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "Tự động sắp xếp bản sau khi nhân bản" + +msgid "Touchpad" +msgstr "Bàn di chuột cảm ứng" + +msgid "Camera style" +msgstr "Kiểu camera" + +msgid "" +"Select camera navigation style.\n" +"Default: LMB+move for rotation, RMB/MMB+move for panning.\n" +"Touchpad: Alt+move for rotation, Shift+move for panning." +msgstr "" +"Chọn kiểu điều hướng camera.\n" +"Mặc định: LMB+di chuyển để xoay, RMB/MMB+di chuyển để kéo.\n" +"Bàn di cảm ứng: Alt+di chuyển để xoay, Shift+di chuyển để kéo." + +msgid "Orbit speed multiplier" +msgstr "Hệ số nhân tốc độ quay" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "Nhân tốc độ quay để di chuyển camera mịn hơn hoặc thô hơn." + +msgid "Zoom to mouse position" +msgstr "Thu phóng đến vị trí chuột" + +msgid "" +"Zoom in towards the mouse pointer's position in the 3D view, rather than the " +"2D window center." +msgstr "" +"Thu phóng về phía vị trí con trỏ chuột trong chế độ xem 3D, thay vì tâm cửa " +"sổ 2D." + +msgid "Use free camera" +msgstr "Sử dụng camera tự do" + +msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "" +"Nếu được bật, sử dụng camera tự do. Nếu không được bật, sử dụng camera bị " +"ràng buộc." + +msgid "Swap pan and rotate mouse buttons" +msgstr "Hoán đổi nút chuột kéo và xoay" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "" +"Nếu được bật, hoán đổi chức năng kéo và xoay của nút chuột trái và phải." + +msgid "Reverse mouse zoom" +msgstr "Đảo ngược thu phóng chuột" + +msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "Nếu được bật, đảo ngược hướng thu phóng bằng con lăn chuột." + +msgid "Clear my choice on..." +msgstr "" + +msgid "Unsaved projects" +msgstr "" + +msgid "Clear my choice on the unsaved projects." +msgstr "Xóa lựa chọn của tôi trên các dự án chưa lưu." + +msgid "Unsaved presets" +msgstr "" + +msgid "Clear my choice on the unsaved presets." +msgstr "Xóa lựa chọn của tôi trên các preset chưa lưu." + +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "" + +msgid "Stealth mode" +msgstr "" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"Điều này dừng truyền dữ liệu đến dịch vụ đám mây của Bambu. Người dùng không " +"sử dụng máy BBL hoặc chỉ sử dụng chế độ LAN có thể bật chức năng này một " +"cách an toàn." + +msgid "Network test" +msgstr "" + +msgid "Test" +msgstr "Kiểm tra" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "Chỉ kiểm tra cập nhật ổn định" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "Tự động đồng bộ preset người dùng (Máy in/Filament/Quy trình)" + +msgid "Update built-in Presets automatically." +msgstr "Cập nhật preset tích hợp tự động." + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "Bật plugin mạng" + +msgid "Use legacy network plugin" +msgstr "" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "Tắt để sử dụng plugin mạng mới nhất hỗ trợ firmware BambuLab mới." + +msgid "Associate files to Snapmaker Orca" +msgstr "Liên kết file với Snapmaker Orca" + +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "Liên kết file 3MF với Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "Nếu được bật, đặt Snapmaker Orca làm ứng dụng mặc định để mở file 3MF." + +msgid "Associate STL files to Snapmaker Orca" +msgstr "Liên kết file STL với Snapmaker Orca" + +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "Nếu được bật, đặt Snapmaker Orca làm ứng dụng mặc định để mở file STL." + +msgid "Associate STEP files to Snapmaker Orca" +msgstr "Liên kết file STEP với Snapmaker Orca" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "Nếu được bật, đặt Snapmaker Orca làm ứng dụng mặc định để mở file STEP." + +msgid "Associate web links to Snapmaker Orca" +msgstr "Liên kết liên kết web với Snapmaker Orca" + +msgid "Developer" +msgstr "" + +msgid "Develop mode" +msgstr "Chế độ phát triển" + +msgid "Skip AMS blacklist check" +msgstr "Bỏ qua kiểm tra danh sách đen AMS" + +msgid "Remove mixed temperature restriction" +msgstr "" + +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "Mức log" + +msgid "fatal" +msgstr "nghiêm trọng" + +msgid "error" +msgstr "lỗi" + +msgid "warning" +msgstr "cảnh báo" + +msgid "debug" +msgstr "gỡ lỗi" + +msgid "trace" +msgstr "theo dõi" + +msgid "Debug" +msgstr "" + +msgid "Sync settings" +msgstr "Cài đặt đồng bộ" + +msgid "User sync" +msgstr "Đồng bộ người dùng" + +msgid "Preset sync" +msgstr "Đồng bộ preset" + +msgid "Preferences sync" +msgstr "Đồng bộ tùy chọn" + +msgid "View control settings" +msgstr "Cài đặt điều khiển chế độ xem" + +msgid "Rotate of view" +msgstr "Xoay chế độ xem" + +msgid "Move of view" +msgstr "Di chuyển chế độ xem" + +msgid "Zoom of view" +msgstr "Thu phóng chế độ xem" + +msgid "Other" +msgstr "Khác" + +msgid "Mouse wheel reverses when zooming" +msgstr "Con lăn chuột đảo ngược khi thu phóng" + +msgid "Enable SSL(MQTT)" +msgstr "Bật SSL(MQTT)" + +msgid "Enable SSL(FTP)" +msgstr "Bật SSL(FTP)" + +msgid "Internal developer mode" +msgstr "Chế độ phát triển nội bộ" + +msgid "Host Setting" +msgstr "Cài đặt máy chủ" + +msgid "DEV host: api-dev.bambu-lab.com/v1" +msgstr "Máy chủ DEV: api-dev.bambu-lab.com/v1" + +msgid "QA host: api-qa.bambu-lab.com/v1" +msgstr "Máy chủ QA: api-qa.bambu-lab.com/v1" + +msgid "PRE host: api-pre.bambu-lab.com/v1" +msgstr "Máy chủ PRE: api-pre.bambu-lab.com/v1" + +msgid "Product host" +msgstr "Máy chủ sản phẩm" + +msgid "debug save button" +msgstr "nút lưu gỡ lỗi" + +msgid "save debug settings" +msgstr "lưu cài đặt gỡ lỗi" + +msgid "DEBUG settings have been saved successfully!" +msgstr "Cài đặt GỠ LỖI đã được lưu thành công!" + +msgid "Cloud environment switched, please login again!" +msgstr "Đã chuyển môi trường đám mây, vui lòng đăng nhập lại!" + +msgid "System presets" +msgstr "Preset hệ thống" + +msgid "User presets" +msgstr "Preset người dùng" + +msgid "Incompatible presets" +msgstr "Preset không tương thích" + +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + +msgid "AMS filaments" +msgstr "Filament AMS" + +msgid "Right filaments" +msgstr "" + +msgid "Click to select filament color" +msgstr "Nhấp để chọn màu filament" + +msgid "Add/Remove presets" +msgstr "Thêm/Xóa preset" + +msgid "Edit preset" +msgstr "Chỉnh sửa preset" + +msgid "Project-inside presets" +msgstr "Preset bên trong dự án" + +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + +msgid "Add/Remove filaments" +msgstr "Thêm/Xóa filament" + +msgid "Add/Remove materials" +msgstr "Thêm/Xóa vật liệu" + +msgid "Select/Remove printers (system presets)" +msgstr "Chọn/Xóa máy in (preset hệ thống)" + +msgid "Create printer" +msgstr "Tạo máy in" + +msgid "Empty" +msgstr "Trống" + +msgid "Incompatible" +msgstr "Không tương thích" + +msgid "The selected preset is null!" +msgstr "Preset đã chọn rỗng!" + +msgid "End" +msgstr "Kết thúc" + +msgid "Customize" +msgstr "Tùy chỉnh" + +msgid "Other layer filament sequence" +msgstr "Trình tự filament lớp khác" + +msgid "Please input layer value (>= 2)." +msgstr "Vui lòng nhập giá trị lớp (>= 2)." + +msgid "Plate name" +msgstr "Tên bản" + +msgid "Same as Global Plate Type" +msgstr "Giống như loại bản toàn cục" + +msgid "Bed type" +msgstr "Loại bàn in" + +msgid "Same as Global Print Sequence" +msgstr "Giống như trình tự in toàn cục" + +msgid "Print sequence" +msgstr "Trình tự in" + +msgid "Same as Global" +msgstr "Giống như toàn cục" + +msgid "Disable" +msgstr "Tắt" + +msgid "Spiral vase" +msgstr "Bình xoắn ốc" + +msgid "First layer filament sequence" +msgstr "Trình tự filament lớp đầu tiên" + +msgid "Same as Global Bed Type" +msgstr "Giống như loại bàn in toàn cục" + +msgid "By Layer" +msgstr "Theo lớp" + +msgid "By Object" +msgstr "Theo đối tượng" + +msgid "Accept" +msgstr "Chấp nhận" + +msgid "Log Out" +msgstr "Đăng xuất" + +msgid "Slice all plate to obtain time and filament estimation" +msgstr "Slice tất cả bản để có ước tính thời gian và filament" + +msgid "Packing project data into 3MF file" +msgstr "Đang đóng gói dữ liệu dự án vào file 3mf" + +msgid "Uploading 3MF" +msgstr "Đang tải 3MF lên" + +msgid "Jump to model publish web page" +msgstr "Chuyển đến trang web xuất bản model" + +msgid "Note: The preparation may take several minutes. Please be patient." +msgstr "Lưu ý: Chuẩn bị có thể mất vài phút. Vui lòng kiên nhẫn." + +msgid "Publish" +msgstr "Xuất bản" + +msgid "Publish was canceled" +msgstr "Xuất bản đã bị hủy" + +msgid "Slicing Plate 1" +msgstr "Đang slice bản 1" + +msgid "Packing data to 3MF" +msgstr "Đang đóng gói dữ liệu vào 3mf" + +msgid "Jump to webpage" +msgstr "Chuyển đến trang web" + +#, c-format, boost-format +msgid "Save %s as" +msgstr "Lưu %s dưới dạng" + +msgid "User Preset" +msgstr "Preset người dùng" + +msgid "Preset Inside Project" +msgstr "Preset bên trong dự án" + +msgid "Name is unavailable." +msgstr "Tên không khả dụng." + +msgid "Overwriting a system profile is not allowed." +msgstr "Ghi đè hồ sơ hệ thống không được phép." + +#, boost-format +msgid "Preset \"%1%\" already exists." +msgstr "Preset \"%1%\" đã tồn tại." + +#, boost-format +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." +msgstr "Preset \"%1%\" đã tồn tại và không tương thích với máy in hiện tại." + +msgid "Please note that saving will overwrite this preset." +msgstr "Vui lòng lưu ý rằng việc lưu sẽ ghi đè preset này." + +msgid "The name cannot be the same as a preset alias name." +msgstr "Tên không thể giống với tên bí danh preset." + +msgid "Save preset" +msgstr "Lưu preset" + +msgctxt "PresetName" +msgid "Copy" +msgstr "Sao chép" + +#, boost-format +msgid "Printer \"%1%\" is selected with preset \"%2%\"" +msgstr "Máy in \"%1%\" được chọn với preset \"%2%\"" + +#, boost-format +msgid "Please choose an action with \"%1%\" preset after saving." +msgstr "Vui lòng chọn hành động với preset \"%1%\" sau khi lưu." + +#, boost-format +msgid "For \"%1%\", change \"%2%\" to \"%3%\" " +msgstr "Cho \"%1%\", thay đổi \"%2%\" thành \"%3%\" " + +#, boost-format +msgid "For \"%1%\", add \"%2%\" as a new preset" +msgstr "Cho \"%1%\", thêm \"%2%\" như một preset mới" + +#, boost-format +msgid "Simply switch to \"%1%\"" +msgstr "Đơn giản chuyển sang \"%1%\"" + +msgid "Task canceled" +msgstr "Tác vụ đã hủy" + +msgid "Bambu Cool Plate" +msgstr "Bản Bambu Cool" + +msgid "PLA Plate" +msgstr "Bản PLA" + +msgid "Bambu Engineering Plate" +msgstr "Bản Bambu Engineering" + +msgid "Bambu Smooth PEI Plate" +msgstr "Bản Bambu Smooth PEI" + +msgid "High temperature Plate" +msgstr "Bản nhiệt độ cao" + +msgid "Bambu Textured PEI Plate" +msgstr "Bản Bambu Textured PEI" + +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" + +msgid "Flow Dynamics Calibration" +msgstr "Hiệu chỉnh động lực lưu chất" + +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" + +msgid "send completed" +msgstr "gửi hoàn tất" + +msgid "Error code" +msgstr "Mã lỗi" + +msgid "High Flow" +msgstr "" + +#, c-format, boost-format +msgid "" +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s does not match the filament in AMS slot %s. Please update the " +"printer firmware to support AMS slot assignment." +msgstr "" +"Filament %s không khớp với filament trong khe AMS %s. Vui lòng cập nhật " +"firmware máy in để hỗ trợ gán khe AMS." + +msgid "" +"Filament does not match the filament in AMS slot. Please update the printer " +"firmware to support AMS slot assignment." +msgstr "" +"Filament không khớp với filament trong khe AMS. Vui lòng cập nhật firmware " +"máy in để hỗ trợ gán khe AMS." + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." +msgstr "" + +msgid "" +"When enable spiral vase mode, machines with I3 structure will not generate " +"timelapse videos." +msgstr "" +"Khi bật chế độ bình xoắn ốc, máy có cấu trúc I3 sẽ không tạo video timelapse." + +msgid "" +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." +msgstr "" + +msgid "Errors" +msgstr "Lỗi" + +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" + +msgid "" +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " +"currently selected printer. It is recommended that you use the same printer " +"type for slicing." +msgstr "" +"Loại máy in được chọn khi tạo G-code không nhất quán với máy in hiện được " +"chọn. Khuyến nghị bạn sử dụng cùng loại máy in để slice." + +msgid "" +"There are some unknown filaments in the AMS mappings. Please check whether " +"they are the required filaments. If they are okay, press \"Confirm\" to " +"start printing." +msgstr "" +"Có một số filament không xác định trong ánh xạ AMS. Vui lòng kiểm tra xem " +"chúng có phải là filament cần thiết không. Nếu không sao, nhấn \"Xác nhận\" " +"để bắt đầu in." + +msgid "Please check the following:" +msgstr "Vui lòng kiểm tra những điều sau:" + +msgid "Please fix the error above, otherwise printing cannot continue." +msgstr "Vui lòng sửa lỗi ở trên, nếu không việc in không thể tiếp tục." + +msgid "" +"Please click the confirm button if you still want to proceed with printing." +msgstr "Vui lòng nhấp nút xác nhận nếu bạn vẫn muốn tiếp tục in." + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" + +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality." +msgstr "" + +msgid "Preparing print job" +msgstr "Đang chuẩn bị công việc in" + +msgid "The name length exceeds the limit." +msgstr "Độ dài tên vượt quá giới hạn." + +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" + +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "Nhấp vào đây nếu bạn không thể kết nối với máy in" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "Không có tài khoản đăng nhập, chỉ hiển thị máy in ở chế độ LAN" + +msgid "Connecting to server..." +msgstr "Đang kết nối với máy chủ" + +msgid "Synchronizing device information..." +msgstr "Đang đồng bộ thông tin thiết bị" + +msgid "Synchronizing device information timed out." +msgstr "Đồng bộ thông tin thiết bị hết thời gian" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "Không thể gửi công việc in khi máy in đang cập nhật firmware" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "Máy in đang thực thi lệnh. Vui lòng khởi động lại in sau khi kết thúc" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "Không thể gửi công việc in đến máy in có firmware cần được cập nhật." + +msgid "Cannot send a print job for an empty plate." +msgstr "Không thể gửi công việc in cho bản trống" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "Máy in này không hỗ trợ in tất cả các bản" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" + +msgid "Cannot send the print task when the upgrade is in progress" +msgstr "Không thể gửi tác vụ in khi đang nâng cấp" + +msgid "The selected printer is incompatible with the chosen printer presets." +msgstr "Máy in đã chọn không tương thích với preset máy in đã chọn." + +msgid "Storage needs to be inserted before send to printer." +msgstr "" + +msgid "The printer is required to be in the same LAN as Snapmaker Orca." +msgstr "Máy in cần phải ở cùng LAN với Snapmaker Orca." + +msgid "The printer does not support sending to printer storage." +msgstr "" + +msgid "Slice ok." +msgstr "Slice hoàn tất." + +msgid "View all Daily tips" +msgstr "Xem tất cả mẹo hàng ngày" + +msgid "Failed to create socket" +msgstr "Không thể tạo socket" + +msgid "Failed to connect socket" +msgstr "Không thể kết nối socket" + +msgid "Failed to publish login request" +msgstr "Không thể xuất bản yêu cầu đăng nhập" + +msgid "Get ticket from device timeout" +msgstr "Lấy ticket từ thiết bị hết thời gian" + +msgid "Get ticket from server timeout" +msgstr "Lấy ticket từ máy chủ hết thời gian" + +msgid "Failed to post ticket to server" +msgstr "Không thể gửi ticket đến máy chủ" + +msgid "Failed to parse login report reason" +msgstr "Không thể phân tích lý do báo cáo đăng nhập" + +msgid "Receive login report timeout" +msgstr "Nhận báo cáo đăng nhập hết thời gian" + +msgid "Unknown Failure" +msgstr "Lỗi không xác định" + +msgid "" +"Please Find the Pin Code in Account page on printer screen,\n" +" and type in the Pin Code below." +msgstr "" +"Vui lòng tìm mã Pin trong trang Tài khoản trên màn hình máy in,\n" +" và nhập mã Pin bên dưới." + +msgid "Can't find Pin Code?" +msgstr "Không tìm thấy mã Pin?" + +msgid "Pin Code" +msgstr "Mã Pin" + +msgid "Binding..." +msgstr "Đang liên kết..." + +msgid "Please confirm on the printer screen" +msgstr "Vui lòng xác nhận trên màn hình máy in" + +msgid "Log in failed. Please check the Pin Code." +msgstr "Đăng nhập thất bại. Vui lòng kiểm tra mã Pin." + +msgid "Log in printer" +msgstr "Đăng nhập máy in" + +msgid "Would you like to log in to this printer with the current account?" +msgstr "Bạn có muốn đăng nhập vào máy in này với tài khoản hiện tại?" + +msgid "Check the reason" +msgstr "Kiểm tra lý do" + +msgid "Read and accept" +msgstr "Đọc và chấp nhận" + +msgid "Terms and Conditions" +msgstr "Điều khoản và điều kiện" + +msgid "" +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " +"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." +msgstr "" +"Cảm ơn bạn đã mua thiết bị Bambu Lab. Trước khi sử dụng thiết bị Bambu Lab " +"của bạn, vui lòng đọc điều khoản và điều kiện. Bằng cách nhấp để đồng ý sử " +"dụng thiết bị Bambu Lab của bạn, bạn đồng ý tuân thủ Chính sách bảo mật và " +"Điều khoản sử dụng (gọi chung là \"Điều khoản\"). Nếu bạn không tuân thủ " +"hoặc đồng ý với Chính sách bảo mật của Bambu Lab, vui lòng không sử dụng " +"thiết bị và dịch vụ Bambu Lab." + +msgid "and" +msgstr "và" + +msgid "Privacy Policy" +msgstr "Chính sách bảo mật" + +msgid "We ask for your help to improve everyone's printer" +msgstr "Chúng tôi yêu cầu sự giúp đỡ của bạn để cải thiện máy in của mọi người" + +msgid "Statement about User Experience Improvement Program" +msgstr "Tuyên bố về chương trình cải thiện trải nghiệm người dùng" + +#, c-format, boost-format +msgid "" +"In the 3D Printing community, we learn from each other's successes and " +"failures to adjust our own slicing parameters and settings. %s follows the " +"same principle and uses machine learning to improve its performance from the " +"successes and failures of the vast number of prints by our users. We are " +"training %s to be smarter by feeding them the real-world data. If you are " +"willing, this service will access information from your error logs and usage " +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." +msgstr "" +"Trong cộng đồng in 3D, chúng ta học hỏi từ thành công và thất bại của nhau " +"để điều chỉnh các tham số và cài đặt slice của mình. %s tuân theo nguyên tắc " +"tương tự và sử dụng máy học để cải thiện hiệu suất từ thành công và thất bại " +"của số lượng lớn bản in của người dùng. Chúng tôi đang huấn luyện %s thông " +"minh hơn bằng cách cung cấp dữ liệu thực tế. Nếu bạn sẵn lòng, dịch vụ này " +"sẽ truy cập thông tin từ nhật ký lỗi và nhật ký sử dụng của bạn, có thể bao " +"gồm thông tin được mô tả trong Chính sách bảo mật. Chúng tôi sẽ không thu " +"thập bất kỳ Dữ liệu cá nhân nào mà một cá nhân có thể được xác định trực " +"tiếp hoặc gián tiếp, bao gồm nhưng không giới hạn tên, địa chỉ, thông tin " +"thanh toán hoặc số điện thoại. Bằng cách bật dịch vụ này, bạn đồng ý với các " +"điều khoản này và tuyên bố về Chính sách bảo mật." + +msgid "Statement on User Experience Improvement Plan" +msgstr "Tuyên bố về kế hoạch cải thiện trải nghiệm người dùng" + +msgid "Log in successful." +msgstr "Đăng nhập thành công." + +msgid "Log out printer" +msgstr "Đăng xuất máy in" + +msgid "Would you like to log out the printer?" +msgstr "Bạn có muốn đăng xuất máy in?" + +msgid "Please log in first." +msgstr "Vui lòng đăng nhập trước." + +msgid "There was a problem connecting to the printer. Please try again." +msgstr "Đã có vấn đề khi kết nối với máy in. Vui lòng thử lại." + +msgid "Failed to log out." +msgstr "Đăng xuất thất bại." + +#. TRN "Save current Settings" +#, c-format, boost-format +msgid "Save current %s" +msgstr "Lưu %s hiện tại" + +msgid "Delete this preset" +msgstr "Xóa preset này" + +msgid "Search in preset" +msgstr "Tìm kiếm trong preset" + +msgid "Click to reset all settings to the last saved preset." +msgstr "Nhấp để đặt lại tất cả cài đặt về preset đã lưu cuối cùng." + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" +"Cần có prime tower để timelapse mượt. Có thể có khuyết điểm trên model nếu " +"không có prime tower. Bạn có chắc chắn muốn tắt prime tower?" + +msgid "" +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "" +"Bật cả chiều cao Z chính xác và prime tower có thể khiến kích thước prime " +"tower tăng lên. Bạn vẫn muốn bật?" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " +"model without prime tower. Do you want to enable prime tower?" +msgstr "" +"Cần có prime tower để timelapse mượt. Có thể có khuyết điểm trên model nếu " +"không có prime tower. Bạn có muốn bật prime tower?" + +msgid "Still print by object?" +msgstr "Vẫn in theo đối tượng?" + +msgid "" +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" +msgstr "" + +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"Khi sử dụng vật liệu support cho giao diện support, chúng tôi khuyến nghị " +"các cài đặt sau:\n" +"Khoảng cách Z trên 0, khoảng cách giao diện 0, mẫu thẳng hàng xen kẽ và tắt " +"chiều cao lớp support độc lập." + +msgid "" +"Change these settings automatically?\n" +"Yes - Change these settings automatically\n" +"No - Do not change these settings for me" +msgstr "" +"Thay đổi các cài đặt này tự động?\n" +"Có - Thay đổi các cài đặt này tự động\n" +"Không - Không thay đổi các cài đặt này cho tôi" + +msgid "" +"When using soluble material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." +msgstr "" + +msgid "" +"Enabling this option will modify the model's shape. If your print requires " +"precise dimensions or is part of an assembly, it's important to double-check " +"whether this change in geometry impacts the functionality of your print." +msgstr "" +"Bật tùy chọn này sẽ sửa đổi hình dạng của model. Nếu bản in của bạn yêu cầu " +"kích thước chính xác hoặc là một phần của lắp ráp, quan trọng là phải kiểm " +"tra kỹ xem thay đổi hình học này có ảnh hưởng đến chức năng của bản in hay " +"không." + +msgid "Are you sure you want to enable this option?" +msgstr "Bạn có chắc chắn muốn bật tùy chọn này?" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" +"Mẫu infill thường được thiết kế để xử lý xoay tự động nhằm đảm bảo in đúng " +"cách và đạt được hiệu quả dự kiến (ví dụ: Gyroid, Cubic). Xoay mẫu infill " +"thưa hiện tại có thể dẫn đến support không đủ . Vui lòng tiến hành thận " +"trọng và kiểm tra kỹ bất kỳ vấn đề in tiềm ẩn nào. Bạn có chắc chắn muốn bật " +"tùy chọn này?" + +msgid "" +"Layer height is too small.\n" +"It will set to min_layer_height\n" +msgstr "" +"Chiều cao lớp quá nhỏ.\n" +"Nó sẽ được đặt thành min_layer_height\n" + +msgid "" +"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " +"height limits, this may cause printing quality issues." +msgstr "" +"Chiều cao lớp vượt quá giới hạn trong Cài đặt máy in -> Extruder -> Giới hạn " +"chiều cao lớp, điều này có thể gây ra vấn đề chất lượng in." + +msgid "Adjust to the set range automatically?\n" +msgstr "Điều chỉnh về phạm vi đặt tự động?\n" + +msgid "Adjust" +msgstr "Điều chỉnh" + +msgid "Ignore" +msgstr "Bỏ qua" + +msgid "" +"Experimental feature: Retracting and cutting off the filament at a greater " +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." +msgstr "" +"Tính năng thử nghiệm: Rút và cắt filament ở khoảng cách lớn hơn trong quá " +"trình thay filament để giảm thiểu xả. Mặc dù có thể giảm đáng kể lượng xả, " +"nó cũng có thể làm tăng nguy cơ tắc đầu phun hoặc các vấn đề in khác." + +msgid "" +"Experimental feature: Retracting and cutting off the filament at a greater " +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications. Please use with the latest printer firmware." +msgstr "" +"Tính năng thử nghiệm: Rút và cắt filament ở khoảng cách lớn hơn trong quá " +"trình thay filament để giảm thiểu xả. Mặc dù có thể giảm đáng kể lượng xả, " +"nó cũng có thể làm tăng nguy cơ tắc đầu phun hoặc các vấn đề in khác. Vui " +"lòng sử dụng với firmware máy in mới nhất." + +msgid "" +"When recording timelapse without toolhead, it is recommended to add a " +"\"Timelapse Wipe Tower\" \n" +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." +msgstr "" +"Khi ghi timelapse không có đầu công cụ, khuyến nghị thêm \"Timelapse Wipe " +"Tower\" \n" +"bằng cách nhấp chuột phải vào vị trí trống của bàn in và chọn \"Thêm nguyên " +"thủy\"->\"Timelapse Wipe Tower\"." + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Một bản sao của preset hệ thống hiện tại sẽ được tạo, bản sao này sẽ được " +"tách khỏi preset hệ thống." + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "Preset tùy chỉnh hiện tại sẽ được tách khỏi preset hệ thống cha." + +msgid "Modifications to the current profile will be saved." +msgstr "Các thay đổi đối với hồ sơ hiện tại sẽ được lưu." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Hành động này không thể hoàn tác.\n" +"Bạn có muốn tiếp tục?" + +msgid "Detach preset" +msgstr "Tách preset" + +msgid "This is a default preset." +msgstr "Đây là preset mặc định." + +msgid "This is a system preset." +msgstr "Đây là preset hệ thống." + +msgid "Current preset is inherited from the default preset." +msgstr "Preset hiện tại được kế thừa từ preset mặc định." + +msgid "Current preset is inherited from" +msgstr "Preset hiện tại được kế thừa từ" + +msgid "It can't be deleted or modified." +msgstr "Không thể xóa hoặc chỉnh sửa." + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "" +"Bất kỳ thay đổi nào nên được lưu dưới dạng preset mới kế thừa từ preset này." + +msgid "To do that please specify a new name for the preset." +msgstr "Để làm điều đó, vui lòng chỉ định tên mới cho preset." + +msgid "Additional information:" +msgstr "Thông tin bổ sung:" + +msgid "vendor" +msgstr "nhà cung cấp" + +msgid "printer model" +msgstr "model máy in" + +msgid "default print profile" +msgstr "hồ sơ in mặc định" + +msgid "default filament profile" +msgstr "hồ sơ filament mặc định" + +msgid "default SLA material profile" +msgstr "hồ sơ vật liệu SLA mặc định" + +msgid "default SLA print profile" +msgstr "hồ sơ in SLA mặc định" + +msgid "full profile name" +msgstr "tên hồ sơ đầy đủ" + +msgid "symbolic profile name" +msgstr "tên hồ sơ tượng trưng" + +msgid "Line width" +msgstr "Độ rộng đường" + +msgid "Seam" +msgstr "Đường nối" + +msgid "Precision" +msgstr "Độ chính xác" + +msgid "Wall generator" +msgstr "Trình tạo thành" + +msgid "Walls and surfaces" +msgstr "Thành và bề mặt" + +msgid "Bridging" +msgstr "Bắc cầu" + +msgid "Overhangs" +msgstr "Phần nhô" + +msgid "Walls" +msgstr "Thành" + +msgid "Top/bottom shells" +msgstr "Vỏ trên/dưới" + +msgid "Initial layer speed" +msgstr "Tốc độ lớp đầu tiên" + +msgid "Other layers speed" +msgstr "Tốc độ lớp khác" + +msgid "Overhang speed" +msgstr "Tốc độ phần nhô" + +msgid "" +"This is the speed for various overhang degrees. Overhang degrees are " +"expressed as a percentage of line width. 0 speed means no slowing down for " +"the overhang degree range and wall speed is used" +msgstr "" +"Đây là tốc độ cho các mức độ nhô khác nhau. Mức độ nhô được biểu thị dưới " +"dạng phần trăm độ rộng đường. Tốc độ 0 có nghĩa là không giảm tốc độ cho " +"phạm vi mức độ nhô và tốc độ thành được sử dụng" + +msgid "Bridge" +msgstr "Cầu" + +msgid "Set speed for external and internal bridges" +msgstr "Đặt tốc độ cho cầu bên ngoài và bên trong" + +msgid "Travel speed" +msgstr "Tốc độ di chuyển" + +msgid "Acceleration" +msgstr "Gia tốc" + +msgid "Jerk(XY)" +msgstr "Giật(XY)" + +msgid "Raft" +msgstr "Bè" + +msgid "Support filament" +msgstr "Filament support" + +msgid "Support ironing" +msgstr "Ủi support" + +msgid "Tree supports" +msgstr "Support dạng cây" + +msgid "Multimaterial" +msgstr "Đa vật liệu" + +msgid "Prime tower" +msgstr "Prime tower" + +msgid "Filament for Features" +msgstr "Filament cho tính năng" + +msgid "Ooze prevention" +msgstr "Ngăn chảy nhựa" + +msgid "Skirt" +msgstr "Viền" + +msgid "Special mode" +msgstr "Chế độ đặc biệt" + +msgid "G-code output" +msgstr "Đầu ra G-code" + +msgid "Post-processing Scripts" +msgstr "Script hậu xử lý" + +msgid "Notes" +msgstr "Ghi chú" + +msgid "Frequent" +msgstr "Thường xuyên" + +#, c-format, boost-format +msgid "" +"Following line %s contains reserved keywords.\n" +"Please remove it, or will beat G-code visualization and printing time " +"estimation." +msgid_plural "" +"Following lines %s contain reserved keywords.\n" +"Please remove them, or will beat G-code visualization and printing time " +"estimation." +msgstr[0] "" +"Dòng sau %s chứa từ khóa dành riêng.\n" +"Vui lòng xóa chúng, nếu không sẽ ảnh hưởng đến hình ảnh hóa G-code và ước " +"tính thời gian in." + +msgid "Reserved keywords found" +msgstr "Tìm thấy từ khóa dành riêng" + +msgid "Setting Overrides" +msgstr "Ghi đè cài đặt" + +msgid "Retraction" +msgstr "Rút" + +msgid "Basic information" +msgstr "Thông tin cơ bản" + +msgid "Recommended nozzle temperature" +msgstr "Nhiệt độ đầu phun khuyến nghị" + +msgid "Recommended nozzle temperature range of this filament. 0 means no set" +msgstr "" +"Phạm vi nhiệt độ đầu phun khuyến nghị của filament này. 0 có nghĩa là không " +"đặt" + +msgid "Flow ratio and Pressure Advance" +msgstr "Tỷ lệ lưu lượng và áp suất nâng cao" + +msgid "Print chamber temperature" +msgstr "Nhiệt độ buồng in" + +msgid "Print temperature" +msgstr "Nhiệt độ in" + +msgid "Nozzle temperature when printing" +msgstr "Nhiệt độ đầu phun khi in" + +msgid "Cool Plate (SuperTack)" +msgstr "Bản Cool (SuperTack)" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Nhiệt độ bàn khi bản Cool SuperTack được lắp. Giá trị 0 có nghĩa là filament " +"không hỗ trợ in trên bản Cool SuperTack." + +msgid "Cool Plate" +msgstr "Bản Cool" + +msgid "" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "" +"Nhiệt độ bàn khi bản Cool được lắp. Giá trị 0 có nghĩa là filament không hỗ " +"trợ in trên bản Cool." + +msgid "Textured Cool Plate" +msgstr "Bản Textured Cool" + +msgid "" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." +msgstr "" +"Nhiệt độ bàn khi bản Textured Cool được lắp. Giá trị 0 có nghĩa là filament " +"không hỗ trợ in trên bản Textured Cool." + +msgid "Engineering Plate" +msgstr "Bản Engineering" + +msgid "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "" +"Nhiệt độ bàn khi bản Engineering được lắp. Giá trị 0 có nghĩa là filament " +"không hỗ trợ in trên bản Engineering." + +msgid "Smooth PEI Plate / High Temp Plate" +msgstr "Bản Smooth PEI / Bản nhiệt độ cao" + +msgid "" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." +msgstr "" +"Nhiệt độ bàn khi bản Smooth PEI/Bản nhiệt độ cao được lắp. Giá trị 0 có " +"nghĩa là filament không hỗ trợ in trên bản Smooth PEI/Bản nhiệt độ cao." + +msgid "Textured PEI Plate" +msgstr "Bản Textured PEI" + +msgid "" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." +msgstr "" +"Nhiệt độ bàn khi bản Textured PEI được lắp. Giá trị 0 có nghĩa là filament " +"không hỗ trợ in trên bản Textured PEI." + +msgid "Volumetric speed limitation" +msgstr "Giới hạn tốc độ thể tích" + +msgid "Cooling for specific layer" +msgstr "Làm mát cho lớp cụ thể" + +msgid "Part cooling fan" +msgstr "Quạt làm mát phần" + +msgid "Min fan speed threshold" +msgstr "Ngưỡng tốc độ quạt tối thiểu" + +msgid "" +"Part cooling fan speed will start to run at min speed when the estimated " +"layer time is no longer than the layer time in setting. When layer time is " +"shorter than threshold, fan speed is interpolated between the minimum and " +"maximum fan speed according to layer printing time" +msgstr "" +"Tốc độ quạt làm mát phần sẽ bắt đầu chạy ở tốc độ tối thiểu khi thời gian " +"lớp ước tính không dài hơn thời gian lớp trong cài đặt. Khi thời gian lớp " +"ngắn hơn ngưỡng, tốc độ quạt được nội suy giữa tốc độ quạt tối thiểu và tối " +"đa theo thời gian in lớp" + +msgid "Max fan speed threshold" +msgstr "Ngưỡng tốc độ quạt tối đa" + +msgid "" +"Part cooling fan speed will be max when the estimated layer time is shorter " +"than the setting value" +msgstr "" +"Tốc độ quạt làm mát phần sẽ ở mức tối đa khi thời gian lớp ước tính ngắn hơn " +"giá trị cài đặt" + +msgid "Auxiliary part cooling fan" +msgstr "Quạt làm mát phần phụ" + +msgid "Exhaust fan" +msgstr "Quạt thải" + +msgid "During print" +msgstr "Trong khi in" + +msgid "Complete print" +msgstr "Hoàn thành in" + +msgid "Filament start G-code" +msgstr "G-code bắt đầu filament" + +msgid "Filament end G-code" +msgstr "G-code kết thúc filament" + +msgid "Wipe tower parameters" +msgstr "Tham số wipe tower" + +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" +msgstr "Tham số thay công cụ với máy in MM extruder đơn" + +msgid "Set" +msgstr "Đặt" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "Tham số thay công cụ với máy in MM nhiều extruder" + +msgid "Dependencies" +msgstr "Phụ thuộc" + +msgid "Compatible printers" +msgstr "Máy in tương thích" + +msgid "Compatible process profiles" +msgstr "Hồ sơ quy trình tương thích" + +msgid "Printable space" +msgstr "Không gian in" + +#. TRN: The first argument is the parameter's name; the second argument is its value. +#, boost-format +msgid "Invalid value provided for parameter %1%: %2%" +msgstr "Giá trị không hợp lệ được cung cấp cho tham số %1%: %2%" + +msgid "G-code flavor is switched" +msgstr "Kiểu G-code đã được chuyển" + +msgid "Cooling Fan" +msgstr "Quạt làm mát" + +msgid "Fan speed-up time" +msgstr "Thời gian tăng tốc quạt" + +msgid "Extruder Clearance" +msgstr "Khoảng trống extruder" + +msgid "Adaptive bed mesh" +msgstr "Lưới bàn in thích ứng" + +msgid "Accessory" +msgstr "Phụ kiện" + +msgid "Machine G-code" +msgstr "G-code máy" + +msgid "Machine start G-code" +msgstr "G-code bắt đầu máy" + +msgid "Machine end G-code" +msgstr "G-code kết thúc máy" + +msgid "Printing by object G-code" +msgstr "G-code in theo đối tượng" + +msgid "Before layer change G-code" +msgstr "G-code trước khi thay đổi lớp" + +msgid "Layer change G-code" +msgstr "G-code thay đổi lớp" + +msgid "Timelapse G-code" +msgstr "G-code timelapse" + +msgid "Clumping Detection G-code" +msgstr "" + +msgid "Change filament G-code" +msgstr "G-code thay filament" + +msgid "Change extrusion role G-code" +msgstr "G-code thay đổi vai trò đùn" + +msgid "Pause G-code" +msgstr "G-code tạm dừng" + +msgid "Template Custom G-code" +msgstr "Mẫu G-code tùy chỉnh" + +msgid "Motion ability" +msgstr "Khả năng chuyển động" + +msgid "Normal" +msgstr "Bình thường" + +msgid "Resonance Avoidance" +msgstr "Tránh cộng hưởng" + +msgid "Resonance Avoidance Speed" +msgstr "Tốc độ tránh cộng hưởng" + +msgid "Speed limitation" +msgstr "Giới hạn tốc độ" + +msgid "Acceleration limitation" +msgstr "Giới hạn gia tốc" + +msgid "Jerk limitation" +msgstr "Giới hạn giật" + +msgid "Single extruder multi-material setup" +msgstr "Cài đặt đa vật liệu extruder đơn" + +msgid "Number of extruders of the printer." +msgstr "Số lượng extruder của máy in." + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Đã chọn đa vật liệu extruder đơn, \n" +"và tất cả extruder phải có cùng đường kính.\n" +"Bạn có muốn thay đổi đường kính cho tất cả extruder thành giá trị đường kính " +"đầu phun extruder đầu tiên?" + +msgid "Nozzle diameter" +msgstr "Đường kính đầu phun" + +msgid "Wipe tower" +msgstr "Wipe tower" + +msgid "Single extruder multi-material parameters" +msgstr "Tham số đa vật liệu extruder đơn" + +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Đây là máy in đa vật liệu extruder đơn, đường kính của tất cả extruder sẽ " +"được đặt thành giá trị mới. Bạn có muốn tiếp tục?" + +msgid "Layer height limits" +msgstr "Giới hạn chiều cao lớp" + +msgid "Z-Hop" +msgstr "Z-Hop" + +msgid "Retraction when switching material" +msgstr "Rút khi chuyển vật liệu" + +msgid "" +"The Wipe option is not available when using the Firmware Retraction mode.\n" +"\n" +"Shall I disable it in order to enable Firmware Retraction?" +msgstr "" +"Tùy chọn lau không khả dụng khi sử dụng chế độ rút firmware.\n" +"\n" +"Tôi có nên tắt nó để bật rút firmware?" + +msgid "Firmware Retraction" +msgstr "Rút firmware" + +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + +msgid "Detached" +msgstr "Đã tách" + +#, c-format, boost-format +msgid "" +"%d Filament Preset and %d Process Preset is attached to this printer. Those " +"presets would be deleted if the printer is deleted." +msgstr "" +"Preset filament %d và preset quy trình %d được đính kèm với máy in này. Các " +"preset đó sẽ bị xóa nếu máy in bị xóa." + +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "Preset được kế thừa bởi preset khác không thể bị xóa!" + +msgid "The following presets inherit this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "Các preset sau kế thừa preset này." + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "Preset %1%" + +msgid "Following preset will be deleted too." +msgid_plural "Following presets will be deleted too." +msgstr[0] "Các preset sau cũng sẽ bị xóa." + +#, boost-format +msgid "Are you sure to %1% the selected preset?" +msgstr "Bạn có chắc chắn %1% preset đã chọn?" + +#, c-format, boost-format +msgid "Left: %s" +msgstr "" + +#, c-format, boost-format +msgid "Right: %s" +msgstr "" + +msgid "Click to reset current value and attach to the global value." +msgstr "Nhấp để đặt lại giá trị hiện tại và đính kèm với giá trị toàn cục." + +msgid "Click to drop current modify and reset to saved value." +msgstr "Nhấp để bỏ thay đổi hiện tại và đặt lại về giá trị đã lưu." + +msgid "Process Settings" +msgstr "Cài đặt quy trình" + +msgid "Undef" +msgstr "Không xác định" + +msgid "Unsaved Changes" +msgstr "Thay đổi chưa lưu" + +msgid "Transfer or discard changes" +msgstr "Chuyển hoặc loại bỏ thay đổi" + +msgid "Old Value" +msgstr "Giá trị cũ" + +msgid "New Value" +msgstr "Giá trị mới" + +msgid "Transfer" +msgstr "Chuyển" + +msgid "Don't save" +msgstr "Không lưu" + +msgid "Discard" +msgstr "Loại bỏ" + +msgid "Click the right mouse button to display the full text." +msgstr "Nhấp chuột phải để hiển thị toàn bộ văn bản." + +msgid "All changes will not be saved" +msgstr "Tất cả thay đổi sẽ không được lưu" + +msgid "All changes will be discarded." +msgstr "Tất cả thay đổi sẽ bị loại bỏ." + +msgid "Save the selected options." +msgstr "Lưu các tùy chọn đã chọn." + +msgid "Keep the selected options." +msgstr "Giữ các tùy chọn đã chọn." + +msgid "Transfer the selected options to the newly selected preset." +msgstr "Chuyển các tùy chọn đã chọn sang preset mới được chọn." + +#, boost-format +msgid "" +"Save the selected options to preset \n" +"\"%1%\"." +msgstr "" +"Lưu các tùy chọn đã chọn vào preset \n" +"\"%1%\"." + +#, boost-format +msgid "" +"Transfer the selected options to the newly selected preset \n" +"\"%1%\"." +msgstr "" +"Chuyển các tùy chọn đã chọn sang preset mới được chọn \n" +"\"%1%\"." + +#, boost-format +msgid "Preset \"%1%\" contains the following unsaved changes:" +msgstr "Preset \"%1%\" chứa các thay đổi chưa lưu sau:" + +#, boost-format +msgid "" +"Preset \"%1%\" is not compatible with the new printer profile and it " +"contains the following unsaved changes:" +msgstr "" +"Preset \"%1%\" không tương thích với hồ sơ máy in mới và nó chứa các thay " +"đổi chưa lưu sau:" + +#, boost-format +msgid "" +"Preset \"%1%\" is not compatible with the new process profile and it " +"contains the following unsaved changes:" +msgstr "" +"Preset \"%1%\" không tương thích với hồ sơ quy trình mới và nó chứa các thay " +"đổi chưa lưu sau:" + +#, boost-format +msgid "You have changed some settings of preset \"%1%\"." +msgstr "Bạn đã thay đổi một số cài đặt của preset \"%1%\"." + +msgid "" +"\n" +"You can save or discard the preset values you have modified." +msgstr "" +"\n" +"Bạn có thể lưu hoặc loại bỏ các giá trị preset bạn đã thay đổi." + +msgid "" +"\n" +"You can save or discard the preset values you have modified, or choose to " +"transfer the values you have modified to the new preset." +msgstr "" +"\n" +"Bạn có thể lưu hoặc loại bỏ các giá trị preset bạn đã thay đổi, hoặc chọn " +"chuyển các giá trị bạn đã thay đổi sang preset mới." + +msgid "You have previously modified your settings." +msgstr "Bạn đã thay đổi cài đặt của mình trước đó." + +msgid "" +"\n" +"You can discard the preset values you have modified, or choose to transfer " +"the modified values to the new project" +msgstr "" +"\n" +"Bạn có thể loại bỏ các giá trị preset bạn đã thay đổi, hoặc chọn chuyển các " +"giá trị đã thay đổi sang dự án mới" + +msgid "Extruders count" +msgstr "Số lượng extruder" + +msgid "Capabilities" +msgstr "Khả năng" + +msgid "Show all presets (including incompatible)" +msgstr "Hiển thị tất cả preset (bao gồm cả không tương thích)" + +msgid "Select presets to compare" +msgstr "Chọn preset để so sánh" + +msgid "" +"You can only transfer to current active profile because it has been modified." +msgstr "" +"Bạn chỉ có thể chuyển sang hồ sơ hoạt động hiện tại vì nó đã được sửa đổi." + +msgid "" +"Transfer the selected options from left preset to the right.\n" +"Note: New modified presets will be selected in settings tabs after close " +"this dialog." +msgstr "" +"Chuyển các tùy chọn đã chọn từ preset bên trái sang bên phải.\n" +"Lưu ý: Preset đã sửa đổi mới sẽ được chọn trong tab cài đặt sau khi đóng hộp " +"thoại này." + +msgid "Transfer values from left to right" +msgstr "Chuyển giá trị từ trái sang phải" + +msgid "" +"If enabled, this dialog can be used for transfer selected values from left " +"to right preset." +msgstr "" +"Nếu được bật, hộp thoại này có thể được sử dụng để chuyển giá trị đã chọn từ " +"trái sang preset bên phải." + +msgid "Add File" +msgstr "Thêm file" + +msgid "Set as cover" +msgstr "Đặt làm ảnh bìa" + +msgid "Cover" +msgstr "Ảnh bìa" + +#, boost-format +msgid "The name \"%1%\" already exists." +msgstr "Tên \"%1%\" đã tồn tại." + +msgid "Basic Info" +msgstr "Thông tin cơ bản" + +msgid "Pictures" +msgstr "Hình ảnh" + +msgid "Bill of Materials" +msgstr "Danh sách vật liệu" + +msgid "Assembly Guide" +msgstr "Hướng dẫn lắp ráp" + +msgid "Author" +msgstr "Tác giả" + +msgid "Model Name" +msgstr "Tên model" + +msgid "Description:" +msgstr "Mô tả:" + +#, c-format, boost-format +msgid "%s Update" +msgstr "Cập nhật %s" + +msgid "A new version is available" +msgstr "Có phiên bản mới" + +msgid "Configuration update" +msgstr "Cập nhật cấu hình" + +msgid "A new configuration package is available. Do you want to install it?" +msgstr "Có gói cấu hình mới. Bạn có muốn cài đặt nó?" + +msgid "Configuration incompatible" +msgstr "Cấu hình không tương thích" + +msgid "the configuration package is incompatible with the current application." +msgstr "gói cấu hình không tương thích với ứng dụng hiện tại." + +#, c-format, boost-format +msgid "" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." +msgstr "" +"Gói cấu hình không tương thích với ứng dụng hiện tại.\n" +"%s sẽ cập nhật gói cấu hình để cho phép ứng dụng khởi động." + +#, c-format, boost-format +msgid "Exit %s" +msgstr "Thoát %s" + +msgid "Configuration updates" +msgstr "Cập nhật cấu hình" + +msgid "No updates available." +msgstr "Không có cập nhật nào." + +msgid "The configuration is up to date." +msgstr "Cấu hình đã được cập nhật." + +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Màu nhập file Obj" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + +msgid "Specify number of colors:" +msgstr "Chỉ định số lượng màu:" + +msgid "Enter or click the adjustment button to modify number again" +msgstr "" + +msgid "Recommended " +msgstr "Khuyến nghị " + +msgid "view" +msgstr "" + +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" + +msgid "Color match" +msgstr "Khớp màu" + +msgid "Approximate color matching." +msgstr "Khớp màu gần đúng." + +msgid "Append" +msgstr "Thêm vào" + +msgid "Append to existing filaments" +msgstr "" + +msgid "Reset mapped extruders." +msgstr "Đặt lại extruder đã ánh xạ." + +msgid "Note" +msgstr "" + +msgid "" +"The color has been selected, you can choose OK \n" +" to continue or manually adjust it." +msgstr "" + +msgid "" +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "Dùng AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "" +"Máy in đã chọn (%s) không tương thích với hồ sơ máy in được chọn trong " +"slicer (%s)." + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "" +"Timelapse không được hỗ trợ vì trình tự in được đặt thành \"Theo đối tượng\"." + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" +msgstr "" + +msgid "Ramming customization" +msgstr "Tùy chỉnh ramming" + +msgid "" +"Ramming denotes the rapid extrusion just before a tool change in a single-" +"extruder MM printer. Its purpose is to properly shape the end of the " +"unloaded filament so it does not prevent insertion of the new filament and " +"can itself be reinserted later. This phase is important and different " +"materials can require different extrusion speeds to get the good shape. For " +"this reason, the extrusion rates during ramming are adjustable.\n" +"\n" +"This is an expert-level setting, incorrect adjustment will likely lead to " +"jams, extruder wheel grinding into filament etc." +msgstr "" +"Ramming biểu thị việc đùn nhanh ngay trước khi thay đổi công cụ trong máy in " +"MM extruder đơn. Mục đích của nó là tạo hình đầu filament đã tháo một cách " +"phù hợp để không ngăn cản việc lắp filament mới và bản thân nó có thể được " +"lắp lại sau này. Giai đoạn này rất quan trọng và các vật liệu khác nhau có " +"thể yêu cầu tốc độ đùn khác nhau để có được hình dạng tốt. Vì lý do này, tốc " +"độ đùn trong quá trình ramming có thể điều chỉnh.\n" +"\n" +"Đây là cài đặt cấp chuyên gia, điều chỉnh không đúng cách có thể dẫn đến " +"kẹt, bánh xe extruder mài vào filament, v.v." + +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "Để có tốc độ dòng chảy không đổi, giữ %1% trong khi kéo." + +msgid "Total ramming" +msgstr "Tổng ramming" + +msgid "Volume" +msgstr "Thể tích" + +msgid "Ramming line" +msgstr "Đường ramming" + +msgid "" +"Orca would re-calculate your flushing volumes everytime the filaments color " +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" +msgstr "" + +msgid "Flushing volume (mm³) for each filament pair." +msgstr "Khối lượng xả (mm³) cho mỗi cặp filament." + +#, c-format, boost-format +msgid "Suggestion: Flushing Volume in range [%d, %d]" +msgstr "Gợi ý: Khối lượng xả trong khoảng [%d, %d]" + +#, c-format, boost-format +msgid "The multiplier should be in range [%.2f, %.2f]." +msgstr "Hệ số nhân nên nằm trong khoảng [%.2f, %.2f]." + +msgid "Re-calculate" +msgstr "Tính lại" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + +msgid "Multiplier" +msgstr "Hệ số nhân" + +msgid "Flushing volumes for filament change" +msgstr "Khối lượng xả khi thay filament" + +msgid "Please choose the filament colour" +msgstr "" + +msgid "" +"Windows Media Player is required for this task! Do you want to enable " +"'Windows Media Player' for your operation system?" +msgstr "" +"Windows Media Player là cần thiết cho tác vụ này! Bạn có muốn bật 'Windows " +"Media Player' cho hệ điều hành của bạn?" + +msgid "" +"BambuSource has not correctly been registered for media playing! Press Yes " +"to re-register it. You will be promoted twice" +msgstr "" +"BambuSource chưa được đăng ký chính xác để phát media! Nhấn Có để đăng ký " +"lại. Bạn sẽ được nhắc hai lần" + +msgid "" +"Missing BambuSource component registered for media playing! Please re-" +"install BambuStudio or seek after-sales help." +msgstr "" +"Thiếu thành phần BambuSource được đăng ký để phát media! Vui lòng cài đặt " +"lại BambuStudio hoặc tìm kiếm trợ giúp sau bán hàng." + +msgid "" +"Using a BambuSource from a different install, video play may not work " +"correctly! Press Yes to fix it." +msgstr "" +"Đang sử dụng BambuSource từ cài đặt khác, phát video có thể không hoạt động " +"đúng! Nhấn Có để sửa nó." + +msgid "" +"Your system is missing H.264 codecs for GStreamer, which are required to " +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"libav packages, then restart Snapmaker Orca?)" +msgstr "" +"Hệ thống của bạn thiếu codec H.264 cho GStreamer, cần thiết để phát video. " +"(Hãy thử cài đặt gói gstreamer1.0-plugins-bad hoặc gstreamer1.0-libav, sau " +"đó khởi động lại Snapmaker Orca?)" + +msgid "Bambu Network plug-in not detected." +msgstr "Không phát hiện plug-in mạng Bambu." + +msgid "Click here to download it." +msgstr "Nhấp vào đây để tải xuống." + +msgid "Login" +msgstr "Đăng nhập" + +msgid "The configuration package is changed in previous Config Guide" +msgstr "Gói cấu hình đã được thay đổi trong hướng dẫn cấu hình trước" + +msgid "Configuration package changed" +msgstr "Gói cấu hình đã thay đổi" + +msgid "Toolbar" +msgstr "Thanh công cụ" + +msgid "Objects list" +msgstr "Danh sách đối tượng" + +msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" +msgstr "Nhập dữ liệu hình học từ file STL/STEP/3MF/OBJ/AMF" + +msgid "Paste from clipboard" +msgstr "Dán từ clipboard" + +msgid "Show/Hide 3Dconnexion devices settings dialog" +msgstr "Hiển thị/Ẩn hộp thoại cài đặt thiết bị 3Dconnexion" + +msgid "Switch table page" +msgstr "Chuyển trang bảng" + +msgid "Show keyboard shortcuts list" +msgstr "Hiển thị danh sách phím tắt" + +msgid "Global shortcuts" +msgstr "Phím tắt toàn cục" + +msgid "Pan View" +msgstr "Kéo chế độ xem" + +msgid "Rotate View" +msgstr "Xoay chế độ xem" + +msgid "Zoom View" +msgstr "Thu phóng chế độ xem" + +msgid "" +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." +msgstr "" +"Tự động định hướng đối tượng đã chọn hoặc tất cả đối tượng. Nếu có đối tượng " +"đã chọn, nó chỉ định hướng những đối tượng đã chọn. Nếu không, nó sẽ định " +"hướng tất cả đối tượng trong dự án hiện tại." + +msgid "Auto orients all objects on the active plate." +msgstr "Tự động định hướng tất cả đối tượng trên bản đang hoạt động." + +msgid "Collapse/Expand the sidebar" +msgstr "Thu gọn/Mở rộng thanh bên" + +msgid "Any arrow" +msgstr "Phím mũi tên bất kỳ" + +msgid "Movement in camera space" +msgstr "Di chuyển trong không gian camera" + +msgid "Select a part" +msgstr "Chọn một phần" + +msgid "Select multiple objects" +msgstr "Chọn nhiều đối tượng" + +msgid "Select objects by rectangle" +msgstr "Chọn đối tượng bằng hình chữ nhật" + +msgid "Arrow Up" +msgstr "Mũi tên lên" + +msgid "Move selection 10 mm in positive Y direction" +msgstr "Di chuyển lựa chọn 10 mm theo hướng Y dương" + +msgid "Arrow Down" +msgstr "Mũi tên xuống" + +msgid "Move selection 10 mm in negative Y direction" +msgstr "Di chuyển lựa chọn 10 mm theo hướng Y âm" + +msgid "Arrow Left" +msgstr "Mũi tên trái" + +msgid "Move selection 10 mm in negative X direction" +msgstr "Di chuyển lựa chọn 10 mm theo hướng X âm" + +msgid "Arrow Right" +msgstr "Mũi tên phải" + +msgid "Move selection 10 mm in positive X direction" +msgstr "Di chuyển lựa chọn 10 mm theo hướng X dương" + +msgid "Movement step set to 1 mm" +msgstr "Bước di chuyển được đặt thành 1 mm" + +msgid "keyboard 1-9: set filament for object/part" +msgstr "bàn phím 1-9: đặt filament cho đối tượng/phần" + +msgid "Camera view - Default" +msgstr "Chế độ xem camera - Mặc định" + +msgid "Camera view - Top" +msgstr "Chế độ xem camera - Trên" + +msgid "Camera view - Bottom" +msgstr "Chế độ xem camera - Dưới" + +msgid "Camera view - Front" +msgstr "Chế độ xem camera - Trước" + +msgid "Camera view - Behind" +msgstr "Chế độ xem camera - Sau" + +msgid "Camera Angle - Left side" +msgstr "Góc camera - Bên trái" + +msgid "Camera Angle - Right side" +msgstr "Góc camera - Bên phải" + +msgid "Select all objects" +msgstr "Chọn tất cả đối tượng" + +msgid "Gizmo move" +msgstr "Gizmo di chuyển" + +msgid "Gizmo rotate" +msgstr "Gizmo xoay" + +msgid "Gizmo scale" +msgstr "Gizmo tỷ lệ" + +msgid "Gizmo place face on bed" +msgstr "Gizmo đặt mặt lên bàn" + +msgid "Gizmo cut" +msgstr "Gizmo cắt" + +msgid "Gizmo mesh boolean" +msgstr "Gizmo mesh boolean" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM tô fuzzy skin" + +msgid "Gizmo SLA support points" +msgstr "Gizmo điểm support SLA" + +msgid "Gizmo FDM paint-on seam" +msgstr "Gizmo FDM tô seam" + +msgid "Gizmo text emboss/engrave" +msgstr "Gizmo văn bản emboss/khắc" + +msgid "Gizmo measure" +msgstr "Gizmo đo" + +msgid "Gizmo assemble" +msgstr "Gizmo lắp ráp" + +msgid "Gizmo brim ears" +msgstr "Gizmo tai viền" + +msgid "Zoom in" +msgstr "Phóng to" + +msgid "Zoom out" +msgstr "Thu nhỏ" + +msgid "Switch between Prepare/Preview" +msgstr "Chuyển đổi giữa Chuẩn bị/Xem trước" + +msgid "Plater" +msgstr "Bàn in" + +msgid "Move: press to snap by 1mm" +msgstr "Di chuyển: nhấn để bám theo 1mm" + +msgid "Support/Color Painting: adjust pen radius" +msgstr "Tô support/màu: điều chỉnh bán kính bút" + +msgid "Support/Color Painting: adjust section position" +msgstr "Tô support/màu: điều chỉnh vị trí phần" + +msgid "Gizmo" +msgstr "Gizmo" + +msgid "Set extruder number for the objects and parts" +msgstr "Đặt số extruder cho đối tượng và phần" + +msgid "Delete objects, parts, modifiers" +msgstr "Xóa đối tượng, phần, modifier" + +msgid "Select the object/part and press space to change the name" +msgstr "Chọn đối tượng/phần và nhấn phím cách để thay đổi tên" + +msgid "Mouse click" +msgstr "Nhấp chuột" + +msgid "Select the object/part and mouse click to change the name" +msgstr "Chọn đối tượng/phần và nhấp chuột để thay đổi tên" + +msgid "Objects List" +msgstr "Danh sách đối tượng" + +msgid "Vertical slider - Move active thumb Up" +msgstr "Thanh trượt dọc - Di chuyển nút hoạt động lên" + +msgid "Vertical slider - Move active thumb Down" +msgstr "Thanh trượt dọc - Di chuyển nút hoạt động xuống" + +msgid "Horizontal slider - Move active thumb Left" +msgstr "Thanh trượt ngang - Di chuyển nút hoạt động sang trái" + +msgid "Horizontal slider - Move active thumb Right" +msgstr "Thanh trượt ngang - Di chuyển nút hoạt động sang phải" + +msgid "On/Off one layer mode of the vertical slider" +msgstr "Bật/Tắt chế độ một lớp của thanh trượt dọc" + +msgid "On/Off G-code window" +msgstr "Bật/Tắt cửa sổ G-code" + +msgid "Move slider 5x faster" +msgstr "Di chuyển thanh trượt nhanh hơn 5 lần" + +msgid "Horizontal slider - Move to start position" +msgstr "Thanh trượt ngang - Di chuyển đến vị trí bắt đầu" + +msgid "Horizontal slider - Move to last position" +msgstr "Thanh trượt ngang - Di chuyển đến vị trí cuối cùng" + +msgid "Release Note" +msgstr "Ghi chú phát hành" + +#, c-format, boost-format +msgid "version %s update information:" +msgstr "thông tin cập nhật phiên bản %s:" + +msgid "Network plug-in update" +msgstr "Cập nhật plug-in mạng" + +msgid "" +"Click OK to update the Network plug-in when Snapmaker Orca launches next time." +msgstr "Nhấp OK để cập nhật plug-in mạng khi Snapmaker Orca khởi động lần sau." + +#, c-format, boost-format +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "Có plug-in mạng mới (%s). Bạn có muốn cài đặt nó?" + +msgid "New version of Snapmaker Orca" +msgstr "Phiên bản mới của Snapmaker Orca" + +msgid "Skip this Version" +msgstr "Bỏ qua phiên bản này" + +msgid "Confirm and Update Nozzle" +msgstr "Xác nhận và cập nhật đầu phun" + +msgid "Connect the printer using IP and access code" +msgstr "Kết nối máy in bằng IP và mã truy cập" + +msgid "" +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" + +msgid "" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." +msgstr "" + +msgid "IP" +msgstr "IP" + +msgid "Access Code" +msgstr "Mã truy cập" + +msgid "Printer model" +msgstr "Model máy in" + +msgid "Printer name" +msgstr "Tên máy in" + +msgid "Where to find your printer's IP and Access Code?" +msgstr "Tìm IP và mã truy cập của máy in ở đâu?" + +msgid "Connect" +msgstr "Kết nối" + +msgid "Manual Setup" +msgstr "Thiết lập thủ công" + +msgid "IP and Access Code Verified! You may close the window" +msgstr "" + +msgid "connecting..." +msgstr "đang kết nối..." + +msgid "Failed to connect to printer." +msgstr "Không thể kết nối với máy in." + +msgid "Failed to publish login request." +msgstr "Không thể xuất bản yêu cầu đăng nhập." + +msgid "The printer has already been bound." +msgstr "Máy in đã được liên kết." + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "Chế độ máy in không đúng, vui lòng chuyển sang chỉ LAN." + +msgid "Connecting to printer... The dialog will close later" +msgstr "Đang kết nối với máy in... Hộp thoại sẽ đóng sau" + +msgid "Connection failed, please double check IP and Access Code" +msgstr "Kết nối thất bại, vui lòng kiểm tra lại IP và mã truy cập" + +msgid "" +"Connection failed! If your IP and Access Code is correct, \n" +"please move to step 3 for troubleshooting network issues" +msgstr "" +"Kết nối thất bại! Nếu IP và mã truy cập của bạn đúng, \n" +"vui lòng chuyển sang bước 3 để khắc phục sự cố mạng" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "Bơm khí" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "Module cắt" + +msgid "Auto Fire Extinguishing System" +msgstr "" + +msgid "Model:" +msgstr "Model:" + +msgid "Update firmware" +msgstr "Cập nhật firmware" + +msgid "Beta version" +msgstr "Phiên bản Beta" + +msgid "Updating" +msgstr "Đang cập nhật" + +msgid "Update failed" +msgstr "Cập nhật thất bại" + +msgid "Update successful" +msgstr "Cập nhật thành công" + +msgid "" +"Are you sure you want to update? This will take about 10 minutes. Do not " +"turn off the power while the printer is updating." +msgstr "" +"Bạn có chắc chắn muốn cập nhật? Điều này sẽ mất khoảng 10 phút. Không tắt " +"nguồn trong khi máy in đang cập nhật." + +msgid "" +"An important update was detected and needs to be run before printing can " +"continue. Do you want to update now? You can also update later from 'Upgrade " +"firmware'." +msgstr "" +"Phát hiện cập nhật quan trọng và cần được chạy trước khi việc in có thể tiếp " +"tục. Bạn có muốn cập nhật ngay bây giờ? Bạn cũng có thể cập nhật sau từ " +"'Nâng cấp firmware'." + +msgid "" +"The firmware version is abnormal. Repairing and updating are required before " +"printing. Do you want to update now? You can also update later on printer or " +"update next time starting Orca." +msgstr "" +"Phiên bản firmware bất thường. Cần sửa chữa và cập nhật trước khi in. Bạn có " +"muốn cập nhật ngay bây giờ? Bạn cũng có thể cập nhật sau trên máy in hoặc " +"cập nhật lần sau khi khởi động Orca." + +msgid "Extension Board" +msgstr "Bo mạch mở rộng" + +msgid "Saving objects into the 3MF failed." +msgstr "Lưu đối tượng vào 3MF thất bại." + +msgid "Only Windows 10 is supported." +msgstr "Chỉ hỗ trợ Windows 10." + +msgid "Failed to initialize the WinRT library." +msgstr "Không thể khởi tạo thư viện WinRT." + +msgid "Exporting objects" +msgstr "Đang xuất đối tượng" + +msgid "Failed loading objects." +msgstr "Không thể tải đối tượng." + +msgid "Repairing object by Windows service" +msgstr "Đang sửa đối tượng bằng dịch vụ Windows" + +msgid "Repair failed." +msgstr "Sửa chữa thất bại." + +msgid "Loading repaired objects" +msgstr "Đang tải đối tượng đã sửa" + +msgid "Exporting 3MF file failed" +msgstr "Xuất file 3MF thất bại" + +msgid "Import 3MF file failed" +msgstr "Nhập file 3MF thất bại" + +msgid "Repaired 3MF file does not contain any object" +msgstr "File 3MF đã sửa không chứa đối tượng nào" + +msgid "Repaired 3MF file contains more than one object" +msgstr "File 3MF đã sửa chứa nhiều hơn một đối tượng" + +msgid "Repaired 3MF file does not contain any volume" +msgstr "File 3MF đã sửa không chứa khối nào" + +msgid "Repaired 3MF file contains more than one volume" +msgstr "File 3MF đã sửa chứa nhiều hơn một khối" + +msgid "Repair finished" +msgstr "Sửa chữa hoàn tất" + +msgid "Repair canceled" +msgstr "Sửa chữa đã hủy" + +#, boost-format +msgid "Copying of file %1% to %2% failed: %3%" +msgstr "Sao chép file %1% sang %2% thất bại: %3%" + +msgid "Need to check the unsaved changes before configuration updates." +msgstr "Cần kiểm tra các thay đổi chưa lưu trước khi cập nhật cấu hình." + +msgid "Configuration package: " +msgstr "Gói cấu hình: " + +msgid " updated to " +msgstr " đã cập nhật lên " + +msgid "Open G-code file:" +msgstr "Mở file G-code:" + +msgid "" +"One object has empty initial layer and can't be printed. Please Cut the " +"bottom or enable supports." +msgstr "" +"Một đối tượng có lớp đầu tiên trống và không thể in. Vui lòng cắt phần dưới " +"hoặc bật support." + +#, boost-format +msgid "Object can't be printed for empty layer between %1% and %2%." +msgstr "Đối tượng không thể in do lớp trống giữa %1% và %2%." + +#, boost-format +msgid "Object: %1%" +msgstr "Đối tượng: %1%" + +msgid "" +"Maybe parts of the object at these height are too thin, or the object has " +"faulty mesh" +msgstr "" +"Có thể các phần của đối tượng ở chiều cao này quá mỏng, hoặc đối tượng có " +"mesh lỗi" + +msgid "No object can be printed. Maybe too small" +msgstr "Không có đối tượng nào có thể in. Có thể quá nhỏ" + +msgid "" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"Bản in của bạn rất gần vùng priming. Hãy chắc chắn rằng không có va chạm." + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" +"\n" +msgstr "" +"Không thể tạo G-code cho G-code tùy chỉnh không hợp lệ.\n" +"\n" + +msgid "Please check the custom G-code or use the default custom G-code." +msgstr "" +"Vui lòng kiểm tra G-code tùy chỉnh hoặc sử dụng G-code tùy chỉnh mặc định." + +#, boost-format +msgid "Generating G-code: layer %1%" +msgstr "Đang tạo G-code: lớp %1%" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + +msgid "Inner wall" +msgstr "Thành trong" + +msgid "Outer wall" +msgstr "Thành ngoài" + +msgid "Overhang wall" +msgstr "Thành nhô" + +msgid "Sparse infill" +msgstr "Infill thưa" + +msgid "Internal solid infill" +msgstr "Infill đặc bên trong" + +msgid "Top surface" +msgstr "Bề mặt trên" + +msgid "Bottom surface" +msgstr "Bề mặt dưới" + +msgid "Internal Bridge" +msgstr "Cầu bên trong" + +msgid "Gap infill" +msgstr "Infill khe" + +msgid "Support interface" +msgstr "Giao diện support" + +msgid "Support transition" +msgstr "Chuyển tiếp support" + +msgid "Multiple" +msgstr "Nhiều" + +#, boost-format +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " +msgstr "" +"Không thể tính độ rộng đường của %1%. Không thể lấy giá trị của \"%2%\" " + +msgid "" +"Invalid spacing supplied to Flow::with_spacing(), check your layer height " +"and extrusion width" +msgstr "" +"Khoảng cách không hợp lệ được cung cấp cho Flow::with_spacing(), kiểm tra " +"chiều cao lớp và độ rộng đùn của bạn" + +msgid "undefined error" +msgstr "lỗi không xác định" + +msgid "too many files" +msgstr "quá nhiều file" + +msgid "file too large" +msgstr "file quá lớn" + +msgid "unsupported method" +msgstr "phương thức không được hỗ trợ" + +msgid "unsupported encryption" +msgstr "mã hóa không được hỗ trợ" + +msgid "unsupported feature" +msgstr "tính năng không được hỗ trợ" + +msgid "failed finding central directory" +msgstr "không tìm thấy thư mục trung tâm" + +msgid "not a ZIP archive" +msgstr "không phải lưu trữ ZIP" + +msgid "invalid header or corrupted" +msgstr "tiêu đề không hợp lệ hoặc bị hỏng" + +msgid "unsupported multidisk" +msgstr "đa đĩa không được hỗ trợ" + +msgid "decompression failed" +msgstr "giải nén thất bại" + +msgid "compression failed" +msgstr "nén thất bại" + +msgid "unexpected decompressed size" +msgstr "kích thước giải nén không mong đợi" + +msgid "CRC check failed" +msgstr "kiểm tra CRC thất bại" + +msgid "unsupported central directory size" +msgstr "kích thước thư mục trung tâm không được hỗ trợ" + +msgid "allocation failed" +msgstr "phân bổ thất bại" + +msgid "file open failed" +msgstr "mở file thất bại" + +msgid "file create failed" +msgstr "tạo file thất bại" + +msgid "file write failed" +msgstr "ghi file thất bại" + +msgid "file read failed" +msgstr "đọc file thất bại" + +msgid "file close failed" +msgstr "đóng file thất bại" + +msgid "file seek failed" +msgstr "tìm file thất bại" + +msgid "file stat failed" +msgstr "thống kê file thất bại" + +msgid "invalid parameter" +msgstr "tham số không hợp lệ" + +msgid "invalid filename" +msgstr "tên file không hợp lệ" + +msgid "buffer too small" +msgstr "bộ đệm quá nhỏ" + +msgid "internal error" +msgstr "lỗi nội bộ" + +msgid "file not found" +msgstr "không tìm thấy file" + +msgid "archive too large" +msgstr "lưu trữ quá lớn" + +msgid "validation failed" +msgstr "xác thực thất bại" + +msgid "write callback failed" +msgstr "gọi lại ghi thất bại" + +#, boost-format +msgid "" +"%1% is too close to exclusion area, there may be collisions when printing." +msgstr "%1% quá gần vùng loại trừ, có thể có va chạm khi in." + +#, boost-format +msgid "%1% is too close to others, and collisions may be caused." +msgstr "%1% quá gần các đối tượng khác, và có thể gây va chạm." + +#, boost-format +msgid "%1% is too tall, and collisions will be caused." +msgstr "%1% quá cao, và sẽ gây va chạm." + +msgid " is too close to exclusion area, there may be collisions when printing." +msgstr " quá gần vùng loại trừ, có thể có va chạm khi in." + +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + +msgid "Prime Tower" +msgstr "Prime Tower" + +msgid " is too close to others, and collisions may be caused.\n" +msgstr " quá gần các đối tượng khác, và có thể gây va chạm.\n" + +msgid " is too close to exclusion area, and collisions will be caused.\n" +msgstr " quá gần vùng loại trừ, và sẽ gây va chạm.\n" + +msgid "" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "No extrusions under current settings." +msgstr "Không có đùn dưới cài đặt hiện tại." + +msgid "" +"Smooth mode of timelapse is not supported when \"by object\" sequence is " +"enabled." +msgstr "" +"Chế độ mượt của timelapse không được hỗ trợ khi trình tự \"theo đối tượng\" " +"được bật." + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + +msgid "" +"Please select \"By object\" print sequence to print multiple objects in " +"spiral vase mode." +msgstr "" +"Vui lòng chọn trình tự in \"Theo đối tượng\" để in nhiều đối tượng trong chế " +"độ bình xoắn ốc." + +msgid "" +"The spiral vase mode does not work when an object contains more than one " +"materials." +msgstr "" +"Chế độ bình xoắn ốc không hoạt động khi đối tượng chứa nhiều hơn một vật " +"liệu." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"Mặc dù đối tượng %1% vừa với thể tích xây dựng, nó vượt quá chiều cao thể " +"tích xây dựng tối đa do bù co ngót vật liệu." + +#, boost-format +msgid "The object %1% exceeds the maximum build volume height." +msgstr "Đối tượng %1% vượt quá chiều cao thể tích xây dựng tối đa." + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, its last layer exceeds " +"the maximum build volume height." +msgstr "" +"Mặc dù đối tượng %1% vừa với thể tích xây dựng, lớp cuối cùng của nó vượt " +"quá chiều cao thể tích xây dựng tối đa." + +msgid "" +"You might want to reduce the size of your model or change current print " +"settings and retry." +msgstr "" +"Bạn có thể muốn giảm kích thước model của mình hoặc thay đổi cài đặt in hiện " +"tại và thử lại." + +msgid "Variable layer height is not supported with Organic supports." +msgstr "Chiều cao lớp thay đổi không được hỗ trợ với support hữu cơ." + +msgid "" +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." +msgstr "" +"Đường kính đầu phun khác nhau và đường kính filament khác nhau có thể không " +"hoạt động tốt khi prime tower được bật. Nó rất thử nghiệm, vì vậy vui lòng " +"tiến hành thận trọng." + +msgid "" +"The Wipe Tower is currently only supported with the relative extruder " +"addressing (use_relative_e_distances=1)." +msgstr "" +"Wipe Tower hiện chỉ được hỗ trợ với địa chỉ extruder tương đối " +"(use_relative_e_distances=1)." + +msgid "" +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." +msgstr "" +"Ngăn chảy nhựa chỉ được hỗ trợ với wipe tower khi " +"'single_extruder_multi_material' tắt." + +msgid "" +"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " +"RepRapFirmware and Repetier G-code flavors." +msgstr "" +"Prime tower hiện chỉ được hỗ trợ cho các kiểu G-code Marlin, RepRap/" +"Sprinter, RepRapFirmware và Repetier." + +msgid "The prime tower is not supported in \"By object\" print." +msgstr "Prime tower không được hỗ trợ trong in \"Theo đối tượng\"." + +msgid "" +"The prime tower is not supported when adaptive layer height is on. It " +"requires that all objects have the same layer height." +msgstr "" +"Prime tower không được hỗ trợ khi chiều cao lớp thích ứng được bật. Nó yêu " +"cầu tất cả đối tượng có cùng chiều cao lớp." + +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." +msgstr "" +"Prime tower yêu cầu \"khoảng cách support\" là bội số của chiều cao lớp." + +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "Prime tower yêu cầu tất cả đối tượng có cùng chiều cao lớp." + +msgid "" +"The prime tower requires that all objects are printed over the same number " +"of raft layers." +msgstr "Prime tower yêu cầu tất cả đối tượng được in trên cùng số lớp bè." + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"Prime tower chỉ được hỗ trợ cho nhiều đối tượng nếu chúng được in với cùng " +"support_top_z_distance." + +msgid "" +"The prime tower requires that all objects are sliced with the same layer " +"heights." +msgstr "" +"Prime tower yêu cầu tất cả đối tượng được slice với cùng chiều cao lớp." + +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height." +msgstr "" +"Prime tower chỉ được hỗ trợ nếu tất cả đối tượng có cùng chiều cao lớp thay " +"đổi." + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "Một hoặc nhiều đối tượng được gán extruder mà máy in không có." + +msgid "Too small line width" +msgstr "Độ rộng đường quá nhỏ" + +msgid "Too large line width" +msgstr "Độ rộng đường quá lớn" + +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"In với nhiều extruder có đường kính đầu phun khác nhau. Nếu support được in " +"với filament hiện tại (support_filament == 0 hoặc support_interface_filament " +"== 0), tất cả đầu phun phải có cùng đường kính." + +msgid "" +"The prime tower requires that support has the same layer height with object." +msgstr "Prime tower yêu cầu support có cùng chiều cao lớp với đối tượng." + +msgid "" +"Organic support tree tip diameter must not be smaller than support material " +"extrusion width." +msgstr "" +"Đường kính đầu cây support hữu cơ không được nhỏ hơn độ rộng đùn vật liệu " +"support." + +msgid "" +"Organic support branch diameter must not be smaller than 2x support material " +"extrusion width." +msgstr "" +"Đường kính nhánh support hữu cơ không được nhỏ hơn 2 lần độ rộng đùn vật " +"liệu support." + +msgid "" +"Organic support branch diameter must not be smaller than support tree tip " +"diameter." +msgstr "" +"Đường kính nhánh support hữu cơ không được nhỏ hơn đường kính đầu cây " +"support." + +msgid "" +"Support enforcers are used but support is not enabled. Please enable support." +msgstr "" +"Trình tạo support được sử dụng nhưng support không được bật. Vui lòng bật " +"support." + +msgid "Layer height cannot exceed nozzle diameter." +msgstr "Chiều cao lớp không thể vượt quá đường kính đầu phun." + +msgid "" +"Relative extruder addressing requires resetting the extruder position at " +"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " +"layer_gcode." +msgstr "" +"Địa chỉ extruder tương đối yêu cầu đặt lại vị trí extruder tại mỗi lớp để " +"ngăn mất độ chính xác số thực dấu phẩy động. Thêm \"G92 E0\" vào layer_gcode." + +msgid "" +"\"G92 E0\" was found in before_layer_gcode, which is incompatible with " +"absolute extruder addressing." +msgstr "" +"\"G92 E0\" được tìm thấy trong before_layer_gcode, không tương thích với địa " +"chỉ extruder tuyệt đối." + +msgid "" +"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " +"extruder addressing." +msgstr "" +"\"G92 E0\" được tìm thấy trong layer_gcode, không tương thích với địa chỉ " +"extruder tuyệt đối." + +#, c-format, boost-format +msgid "Plate %d: %s does not support filament %s" +msgstr "Bản %d: %s không hỗ trợ filament %s" + +msgid "" +"Setting the jerk speed too low could lead to artifacts on curved surfaces" +msgstr "Đặt tốc độ giật quá thấp có thể dẫn đến khuyết điểm trên bề mặt cong" + +msgid "" +"The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca will automatically cap the jerk speed to ensure it doesn't surpass the " +"printer's capabilities.\n" +"You can adjust the maximum jerk setting in your printer's configuration to " +"get higher speeds." +msgstr "" +"Cài đặt giật vượt quá giật tối đa của máy in (machine_max_jerk_x/" +"machine_max_jerk_y).\n" +"Orca sẽ tự động giới hạn tốc độ giật để đảm bảo không vượt quá khả năng của " +"máy in.\n" +"Bạn có thể điều chỉnh cài đặt giật tối đa trong cấu hình máy in để đạt tốc " +"độ cao hơn." + +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" +"Cài đặt độ lệch nút giao vượt quá giá trị tối đa của máy in " +"(machine_max_junction_deviation).\n" +"Orca sẽ tự động giới hạn độ lệch nút giao để đảm bảo không vượt quá khả năng " +"của máy in.\n" +"Bạn có thể điều chỉnh giá trị machine_max_junction_deviation trong cấu hình " +"máy in để đạt giới hạn cao hơn." + +msgid "" +"The acceleration setting exceeds the printer's maximum acceleration " +"(machine_max_acceleration_extruding).\n" +"Orca will automatically cap the acceleration speed to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_extruding value in your " +"printer's configuration to get higher speeds." +msgstr "" +"Cài đặt gia tốc vượt quá gia tốc tối đa của máy in " +"(machine_max_acceleration_extruding).\n" +"Orca sẽ tự động giới hạn tốc độ gia tốc để đảm bảo không vượt quá khả năng " +"của máy in.\n" +"Bạn có thể điều chỉnh giá trị machine_max_acceleration_extruding trong cấu " +"hình máy in để đạt tốc độ cao hơn." + +msgid "" +"The travel acceleration setting exceeds the printer's maximum travel " +"acceleration (machine_max_acceleration_travel).\n" +"Orca will automatically cap the travel acceleration speed to ensure it " +"doesn't surpass the printer's capabilities.\n" +"You can adjust the machine_max_acceleration_travel value in your printer's " +"configuration to get higher speeds." +msgstr "" +"Cài đặt gia tốc di chuyển vượt quá gia tốc di chuyển tối đa của máy in " +"(machine_max_acceleration_travel).\n" +"Orca sẽ tự động giới hạn tốc độ gia tốc di chuyển để đảm bảo không vượt quá " +"khả năng của máy in.\n" +"Bạn có thể điều chỉnh giá trị machine_max_acceleration_travel trong cấu hình " +"máy in để đạt tốc độ cao hơn." + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" +"Tùy chọn thành chính xác sẽ bị bỏ qua cho trình tự thành ngoài-trong hoặc " +"trong-ngoài-trong." + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" +"Co ngót filament sẽ không được sử dụng vì co ngót filament của các filament " +"đã dùng khác nhau đáng kể." + +msgid "Generating skirt & brim" +msgstr "Đang tạo viền & brim" + +msgid "Exporting G-code" +msgstr "Đang xuất G-code" + +msgid "Generating G-code" +msgstr "Đang tạo G-code" + +msgid "Failed processing of the filename_format template." +msgstr "Không thể xử lý mẫu filename_format." + +msgid "Printer technology" +msgstr "Công nghệ máy in" + +msgid "Printable area" +msgstr "Vùng có thể in" + +msgid "Extruder printable area" +msgstr "" + +msgid "Bed exclude area" +msgstr "Vùng loại trừ bàn in" + +msgid "" +"Unprintable area in XY plane. For example, X1 Series printers use the front " +"left corner to cut filament during filament change. The area is expressed as " +"polygon by points in following format: \"XxY, XxY, ...\"" +msgstr "" +"Vùng không thể in trong mặt phẳng XY. Ví dụ, máy in dòng X1 sử dụng góc trái " +"phía trước để cắt filament trong quá trình thay filament. Vùng được biểu thị " +"dưới dạng đa giác bằng các điểm theo định dạng sau: \"XxY, XxY, ...\"" + +msgid "Bed custom texture" +msgstr "Kết cấu bàn in tùy chỉnh" + +msgid "Bed custom model" +msgstr "Model bàn in tùy chỉnh" + +msgid "Elephant foot compensation" +msgstr "Bù chân voi" + +msgid "" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." +msgstr "Co lớp đầu tiên trên bàn in để bù hiệu ứng chân voi." + +msgid "Elephant foot compensation layers" +msgstr "Lớp bù chân voi" + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be linearly shrunk less, up to the layer indicated by " +"this value." +msgstr "" +"Số lượng lớp mà bù chân voi sẽ hoạt động. Lớp đầu tiên sẽ được co theo giá " +"trị bù chân voi, sau đó các lớp tiếp theo sẽ được co tuyến tính ít hơn, cho " +"đến lớp được chỉ định bởi giá trị này." + +msgid "layers" +msgstr "lớp" + +msgid "" +"Slicing height for each layer. Smaller layer height means more accurate and " +"more printing time." +msgstr "" +"Chiều cao slice cho mỗi lớp. Chiều cao lớp nhỏ hơn có nghĩa là chính xác hơn " +"và thời gian in nhiều hơn." + +msgid "Printable height" +msgstr "Chiều cao có thể in" + +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "Chiều cao có thể in tối đa bị giới hạn bởi cơ chế của máy in." + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + +msgid "Preferred orientation" +msgstr "Định hướng ưa thích" + +msgid "Automatically orient STL files on the Z axis upon initial import." +msgstr "Tự động định hướng STL trên trục Z khi nhập lần đầu." + +msgid "Printer preset names" +msgstr "Tên preset máy in" + +msgid "Use 3rd-party print host" +msgstr "Sử dụng máy chủ in bên thứ ba" + +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." +msgstr "Cho phép điều khiển máy in BambuLab thông qua máy chủ in bên thứ ba." + +msgid "Hostname, IP or URL" +msgstr "Tên máy chủ, IP hoặc URL" + +msgid "" +"Snapmaker Orca can upload G-code files to a printer host. This field should " +"contain the hostname, IP address or URL of the printer host instance. Print " +"host behind HAProxy with basic auth enabled can be accessed by putting the " +"user name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" +msgstr "" +"Snapmaker Orca có thể tải file G-code lên máy chủ máy in. Trường này nên chứa " +"tên máy chủ, địa chỉ IP hoặc URL của phiên bản máy chủ máy in. Máy chủ in " +"đằng sau HAProxy với xác thực cơ bản được bật có thể được truy cập bằng cách " +"đặt tên người dùng và mật khẩu vào URL theo định dạng sau: https://username:" +"password@your-octopi-address/" + +msgid "Device UI" +msgstr "Giao diện thiết bị" + +msgid "" +"Specify the URL of your device user interface if it's not same as print_host." +msgstr "" +"Chỉ định URL của giao diện người dùng thiết bị nếu nó không giống với " +"print_host." + +msgid "API Key / Password" +msgstr "Khóa API / Mật khẩu" + +msgid "" +"Snapmaker Orca can upload G-code files to a printer host. This field should " +"contain the API Key or the password required for authentication." +msgstr "" +"Snapmaker Orca có thể tải file G-code lên máy chủ máy in. Trường này nên chứa " +"khóa API hoặc mật khẩu cần thiết để xác thực." + +msgid "Name of the printer." +msgstr "Tên của máy in." + +msgid "HTTPS CA File" +msgstr "File CA HTTPS" + +msgid "" +"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " +"in crt/pem format. If left blank, the default OS CA certificate repository " +"is used." +msgstr "" +"File chứng chỉ CA tùy chỉnh có thể được chỉ định cho kết nối HTTPS " +"OctoPrint, ở định dạng crt/pem. Nếu để trống, kho chứng chỉ CA OS mặc định " +"sẽ được sử dụng." + +msgid "User" +msgstr "Người dùng" + +msgid "Password" +msgstr "Mật khẩu" + +msgid "Ignore HTTPS certificate revocation checks" +msgstr "Bỏ qua kiểm tra thu hồi chứng chỉ HTTPS" + +msgid "" +"Ignore HTTPS certificate revocation checks in case of missing or offline " +"distribution points. One may want to enable this option for self signed " +"certificates if connection fails." +msgstr "" +"Bỏ qua kiểm tra thu hồi chứng chỉ HTTPS trong trường hợp thiếu hoặc ngoại " +"tuyến điểm phân phối. Bạn có thể muốn bật tùy chọn này cho chứng chỉ tự ký " +"nếu kết nối thất bại." + +msgid "Names of presets related to the physical printer." +msgstr "Tên của preset liên quan đến máy in vật lý." + +msgid "Authorization Type" +msgstr "Loại ủy quyền" + +msgid "API key" +msgstr "Khóa API" + +msgid "HTTP digest" +msgstr "HTTP digest" + +msgid "Avoid crossing walls" +msgstr "Tránh đi qua thành" + +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." +msgstr "Đi vòng để tránh di chuyển qua thành, có thể gây ra cục trên bề mặt." + +msgid "Avoid crossing walls - Max detour length" +msgstr "Tránh đi qua thành - Độ dài vòng tối đa" + +msgid "" +"Maximum detour distance for avoiding crossing wall. Don't detour if the " +"detour distance is larger than this value. Detour length could be specified " +"either as an absolute value or as percentage (for example 50%) of a direct " +"travel path. Zero to disable." +msgstr "" +"Khoảng cách vòng tối đa để tránh đi qua thành. Không đi vòng nếu khoảng cách " +"vòng lớn hơn giá trị này. Độ dài vòng có thể được chỉ định dưới dạng giá trị " +"tuyệt đối hoặc phần trăm (ví dụ 50%) của đường di chuyển trực tiếp. Không để " +"tắt." + +msgid "mm or %" +msgstr "mm hoặc %" + +msgid "Other layers" +msgstr "Lớp khác" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản Cool SuperTack." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản Cool." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản Textured Cool." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản Engineering." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản nhiệt độ cao." + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "" +"Nhiệt độ bàn cho các lớp ngoại trừ lớp đầu tiên. Giá trị 0 có nghĩa là " +"filament không hỗ trợ in trên bản Textured PEI." + +msgid "Initial layer" +msgstr "Lớp đầu tiên" + +msgid "Initial layer bed temperature" +msgstr "Nhiệt độ bàn lớp đầu tiên" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản Cool SuperTack." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản Cool." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản Textured Cool." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản Engineering." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản nhiệt độ cao." + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "" +"Nhiệt độ bàn của lớp đầu tiên. Giá trị 0 có nghĩa là filament không hỗ trợ " +"in trên bản Textured PEI." + +msgid "Bed types supported by the printer." +msgstr "Loại bàn in được hỗ trợ bởi máy in." + +msgid "Smooth Cool Plate" +msgstr "Bản Smooth Cool" + +msgid "Smooth High Temp Plate" +msgstr "Bản Smooth nhiệt độ cao" + +msgid "Default bed type" +msgstr "Loại bàn in mặc định" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "Loại bàn in mặc định cho máy in (hỗ trợ cả định dạng số và chuỗi)." + +msgid "First layer print sequence" +msgstr "Trình tự in lớp đầu tiên" + +msgid "Other layers print sequence" +msgstr "Trình tự in lớp khác" + +msgid "The number of other layers print sequence" +msgstr "Số lượng trình tự in lớp khác" + +msgid "Other layers filament sequence" +msgstr "Trình tự filament lớp khác" + +msgid "This G-code is inserted at every layer change before the Z lift." +msgstr "G-code này được chèn vào mỗi lần thay đổi lớp trước khi nâng Z." + +msgid "Bottom shell layers" +msgstr "Lớp vỏ dưới" + +msgid "" +"This is the number of solid layers of bottom shell, including the bottom " +"surface layer. When the thickness calculated by this value is thinner than " +"bottom shell thickness, the bottom shell layers will be increased." +msgstr "" +"Đây là số lượng lớp đặc của vỏ dưới, bao gồm lớp bề mặt dưới. Khi độ dày " +"tính theo giá trị này mỏng hơn độ dày vỏ dưới, lớp vỏ dưới sẽ được tăng lên." + +msgid "Bottom shell thickness" +msgstr "Độ dày vỏ dưới" + +msgid "" +"The number of bottom solid layers is increased when slicing if the thickness " +"calculated by bottom shell layers is thinner than this value. This can avoid " +"having too thin shell when layer height is small. 0 means that this setting " +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." +msgstr "" +"Số lượng lớp đặc dưới được tăng lên khi slice nếu độ dày tính bằng lớp vỏ " +"dưới mỏng hơn giá trị này. Điều này có thể tránh vỏ quá mỏng khi chiều cao " +"lớp nhỏ. 0 có nghĩa là cài đặt này bị tắt và độ dày vỏ dưới được xác định " +"tuyệt đối bởi lớp vỏ dưới." + +msgid "Apply gap fill" +msgstr "Áp dụng lấp khe" + +msgid "" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" +"\n" +"Options:\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" +"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." +msgstr "" +"Bật lấp khe cho các bề mặt đặc đã chọn. Độ dài khe tối thiểu sẽ được lấp có " +"thể được điều khiển từ tùy chọn lọc khe nhỏ bên dưới.\n" +"\n" +"Tùy chọn:\n" +"1. Mọi nơi: Áp dụng lấp khe cho bề mặt đặc trên, dưới và bên trong để có độ " +"bền tối đa\n" +"2. Bề mặt trên và dưới: Chỉ áp dụng lấp khe cho bề mặt trên và dưới , cân " +"bằng tốc độ in, giảm đùn dư tiềm ẩn trong infill đặc và đảm bảo bề mặt trên " +"và dưới không có khe lỗ kim\n" +"3. Không ở đâu: Tắt lấp khe cho tất cả vùng infill đặc\n" +"\n" +"Lưu ý rằng nếu sử dụng trình tạo chu vi cổ điển, lấp khe cũng có thể được " +"tạo giữa các chu vi, nếu đường có độ rộng đầy đủ không thể vừa giữa chúng. " +"Lấp khe chu vi đó không được điều khiển bởi cài đặt này.\n" +"\n" +"Nếu bạn muốn loại bỏ tất cả lấp khe, bao gồm cả lấp khe được tạo bởi chu vi " +"cổ điển, hãy đặt giá trị lọc khe nhỏ thành một số lớn, như 999999.\n" +"\n" +"Tuy nhiên điều này không được khuyến nghị, vì lấp khe giữa các chu vi đang " +"đóng góp vào độ bền của model. Đối với model mà lấp khe quá mức được tạo " +"giữa các chu vi, một tùy chọn tốt hơn là chuyển sang trình tạo thành arachne " +"và sử dụng tùy chọn này để điều khiển việc lấp khe bề mặt trên và dưới thẩm " +"mỹ có được tạo hay không." + +msgid "Everywhere" +msgstr "Mọi nơi" + +msgid "Top and bottom surfaces" +msgstr "Bề mặt trên và dưới" + +msgid "Nowhere" +msgstr "Không ở đâu" + +msgid "Force cooling for overhangs and bridges" +msgstr "Bắt buộc làm mát cho phần nhô và cầu" + +msgid "" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." +msgstr "" +"Bật tùy chọn này để cho phép điều chỉnh tốc độ quạt làm mát phần cho cụ thể " +"cho phần nhô, cầu bên trong và bên ngoài. Đặt tốc độ quạt cụ thể cho các " +"tính năng này có thể cải thiện chất lượng in tổng thể và giảm cong vênh." + +msgid "Overhangs and external bridges fan speed" +msgstr "Tốc độ quạt phần nhô và cầu bên ngoài" + +msgid "" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." +msgstr "" +"Sử dụng tốc độ quạt làm mát phần này khi in cầu hoặc thành nhô với ngưỡng " +"nhô vượt quá giá trị được đặt trong tham số 'Ngưỡng làm mát phần nhô' ở " +"trên. Tăng làm mát cụ thể cho phần nhô và cầu có thể cải thiện chất lượng in " +"tổng thể của các tính năng này.\n" +"\n" +"Vui lòng lưu ý, tốc độ quạt này được giới hạn ở mức thấp bởi ngưỡng tốc độ " +"quạt tối thiểu được đặt ở trên. Nó cũng được điều chỉnh tăng lên đến ngưỡng " +"tốc độ quạt tối đa khi ngưỡng thời gian lớp tối thiểu không được đáp ứng." + +msgid "Overhang cooling activation threshold" +msgstr "Ngưỡng kích hoạt làm mát phần nhô" + +#, no-c-format, no-boost-format +msgid "" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." +msgstr "" +"Khi phần nhô vượt quá ngưỡng được chỉ định này, bắt buộc quạt làm mát chạy ở " +"'Tốc độ quạt phần nhô' được đặt bên dưới. Ngưỡng này được biểu thị dưới dạng " +"phần trăm, cho biết phần độ rộng của mỗi đường không được hỗ trợ bởi lớp bên " +"dưới nó. Đặt giá trị này thành 0% bắt buộc quạt làm mát chạy cho tất cả " +"thành ngoài, bất kể mức độ nhô." + +msgid "External bridge infill direction" +msgstr "Hướng infill cầu bên ngoài" + +#, fuzzy, no-c-format, no-boost-format +msgid "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for " +"external bridges. Use 180° for zero angle." +msgstr "" +"Ghi đè góc bắc cầu. Nếu để là không, góc bắc cầu sẽ được tính tự động. " +"Nếu không, góc được cung cấp sẽ được sử dụng cho cầu bên ngoài. Sử dụng " +"180° cho góc không." + +msgid "Internal bridge infill direction" +msgstr "Hướng infill cầu bên trong" + +#, fuzzy +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" +"Ghi đè góc bắc cầu bên trong. Nếu để là không, góc bắc cầu sẽ được tính " +"tự động. Nếu không, góc được cung cấp sẽ được sử dụng cho cầu bên trong. " +"Sử dụng 180° cho góc không.\n" +"\n" +"Khuyến nghị để ở 0 trừ khi có nhu cầu model cụ thể không cần." + +msgid "External bridge density" +msgstr "Mật độ cầu bên ngoài" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"Điều khiển mật độ (khoảng cách) của các đường cầu bên ngoài. 100% có nghĩa " +"là cầu đặc. Mặc định là 100%.\n" +"\n" +"Cầu bên ngoài mật độ thấp hơn có thể giúp cải thiện độ tin cậy vì có nhiều " +"không gian hơn để không khí lưu thông xung quanh cầu được đùn, cải thiện tốc " +"độ làm mát của nó." + +msgid "Internal bridge density" +msgstr "Mật độ cầu bên trong" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"Điều khiển mật độ (khoảng cách) của các đường cầu bên trong. 100% có nghĩa " +"là cầu đặc. Mặc định là 100%.\n" +"\n" +"Cầu bên trong mật độ thấp hơn có thể giúp giảm hiện tượng gối trên bề mặt " +"trên và cải thiện độ tin cậy cầu bên trong vì có nhiều không gian hơn để " +"không khí lưu thông xung quanh cầu được đùn, cải thiện tốc độ làm mát của " +"nó.\n" +"\n" +"Tùy chọn này hoạt động đặc biệt tốt khi kết hợp với tùy chọn cầu bên trong " +"thứ hai trên infill, cải thiện thêm cấu trúc bắc cầu bên trong trước khi " +"infill đặc được đùn." + +msgid "Bridge flow ratio" +msgstr "Tỷ lệ lưu lượng cầu" + +msgid "" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Giảm giá trị này một chút (ví dụ 0.9) để giảm lượng vật liệu cho cầu, để cải " +"thiện độ võng.\n" +"\n" +"Lưu lượng cầu thực tế được sử dụng được tính bằng cách nhân giá trị này với " +"tỷ lệ lưu lượng filament, và nếu được đặt, tỷ lệ lưu lượng của đối tượng." + +msgid "Internal bridge flow ratio" +msgstr "Tỷ lệ lưu lượng cầu bên trong" + +msgid "" +"This value governs the thickness of the internal bridge layer. This is the " +"first layer over sparse infill. Decrease this value slightly (for example " +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." +msgstr "" +"Giá trị này điều chỉnh độ dày của lớp cầu bên trong. Đây là lớp đầu tiên " +"trên infill thưa. Giảm giá trị này một chút (ví dụ 0.9) để cải thiện chất " +"lượng bề mặt trên infill thưa.\n" +"\n" +"Lưu lượng cầu bên trong thực tế được sử dụng được tính bằng cách nhân giá " +"trị này với tỷ lệ lưu lượng cầu, tỷ lệ lưu lượng filament, và nếu được đặt, " +"tỷ lệ lưu lượng của đối tượng." + +msgid "Top surface flow ratio" +msgstr "Tỷ lệ lưu lượng bề mặt trên" + +msgid "" +"This factor affects the amount of material for top solid infill. You can " +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Hệ số này ảnh hưởng đến lượng vật liệu cho infill đặc trên. Bạn có thể giảm " +"nó một chút để có bề mặt hoàn thiện mịn.\n" +"\n" +"Lưu lượng bề mặt trên thực tế được sử dụng được tính bằng cách nhân giá trị " +"này với tỷ lệ lưu lượng filament, và nếu được đặt, tỷ lệ lưu lượng của đối " +"tượng." + +msgid "Bottom surface flow ratio" +msgstr "Tỷ lệ lưu lượng bề mặt dưới" + +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"Hệ số này ảnh hưởng đến lượng vật liệu cho infill đặc dưới.\n" +"\n" +"Lưu lượng infill đặc dưới thực tế được sử dụng được tính bằng cách nhân giá " +"trị này với tỷ lệ lưu lượng filament, và nếu được đặt, tỷ lệ lưu lượng của " +"đối tượng." + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Precise wall" +msgstr "Thành chính xác" + +msgid "" +"Improve shell precision by adjusting outer wall spacing. This also improves " +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." +msgstr "" +"Cải thiện độ chính xác vỏ bằng cách điều chỉnh khoảng cách thành ngoài. Điều " +"này cũng cải thiện tính nhất quán của lớp. LƯU Ý: Tùy chọn này sẽ bị bỏ qua " +"cho trình tự thành ngoài-trong hoặc trong-ngoài-trong." + +msgid "Only one wall on top surfaces" +msgstr "Chỉ một thành trên bề mặt trên" + +msgid "" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." +msgstr "" +"Chỉ sử dụng một thành trên bề mặt trên phẳng, để có nhiều không gian hơn cho " +"mẫu infill trên." + +msgid "One wall threshold" +msgstr "Ngưỡng một thành" + +#, no-c-format, no-boost-format +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width.\n" +"Warning: If enabled, artifacts can be created if you have some thin features " +"on the next layer, like letters. Set this setting to 0 to remove these " +"artifacts." +msgstr "" +"Nếu một bề mặt trên phải được in và nó được phủ một phần bởi lớp khác, nó sẽ " +"không được coi là lớp trên nơi độ rộng của nó dưới giá trị này. Điều này có " +"thể hữu ích để không để 'một chu vi trên cùng' kích hoạt trên bề mặt chỉ nên " +"được phủ bởi chu vi. Giá trị này có thể là mm hoặc % của độ rộng đùn chu " +"vi.\n" +"Cảnh báo: Nếu được bật, khuyết điểm có thể được tạo nếu bạn có một số tính " +"năng mỏng trên lớp tiếp theo, như chữ cái. Đặt cài đặt này thành 0 để loại " +"bỏ các khuyết điểm này." + +msgid "Only one wall on first layer" +msgstr "Chỉ một thành trên lớp đầu tiên" + +msgid "" +"Use only one wall on first layer, to give more space to the bottom infill " +"pattern." +msgstr "" +"Chỉ sử dụng một thành trên lớp đầu tiên, để có nhiều không gian hơn cho mẫu " +"infill dưới." + +msgid "Extra perimeters on overhangs" +msgstr "Chu vi bổ sung trên phần nhô" + +msgid "" +"Create additional perimeter paths over steep overhangs and areas where " +"bridges cannot be anchored." +msgstr "" +"Tạo đường chu vi bổ sung trên phần nhô dốc và vùng mà cầu không thể được neo." + +msgid "Reverse on even" +msgstr "Đảo ngược trên lớp chẵn" + +msgid "Overhang reversal" +msgstr "Đảo ngược phần nhô" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on even layers. This alternating pattern can drastically improve " +"steep overhangs.\n" +"\n" +"This setting can also help reduce part warping due to the reduction of " +"stresses in the part walls." +msgstr "" +"Đùn chu vi có một phần trên phần nhô theo hướng ngược lại trên các lớp " +"chẵn. Mẫu xen kẽ này có thể cải thiện đáng kể phần nhô dốc.\n" +"\n" +"Cài đặt này cũng có thể giúp giảm cong vênh phần do giảm ứng suất trong " +"thành phần." + +msgid "Reverse only internal perimeters" +msgstr "Chỉ đảo ngược chu vi bên trong" + +msgid "" +"Apply the reverse perimeters logic only on internal perimeters.\n" +"\n" +"This setting greatly reduces part stresses as they are now distributed in " +"alternating directions. This should reduce part warping while also " +"maintaining external wall quality. This feature can be very useful for warp " +"prone material, like ABS/ASA, and also for elastic filaments, like TPU and " +"Silk PLA. It can also help reduce warping on floating regions over " +"supports.\n" +"\n" +"For this setting to be the most effective, it is recommended to set the " +"Reverse Threshold to 0 so that all internal walls print in alternating " +"directions on even layers irrespective of their overhang degree." +msgstr "" +"Áp dụng logic đảo ngược chu vi chỉ trên chu vi bên trong.\n" +"\n" +"Cài đặt này giảm đáng kể ứng suất phần vì chúng bây giờ được phân phối theo " +"hướng xen kẽ. Điều này sẽ giảm cong vênh phần trong khi cũng duy trì chất " +"lượng thành ngoài. Tính năng này có thể rất hữu ích cho vật liệu dễ cong " +"vênh, như ABS/ASA, và cũng cho filament đàn hồi, như TPU và Silk PLA. Nó " +"cũng có thể giúp giảm cong vênh trên vùng nổi trên support.\n" +"\n" +"Để cài đặt này có hiệu quả nhất, khuyến nghị đặt ngưỡng đảo ngược thành 0 để " +"tất cả thành bên trong in theo hướng xen kẽ trên các lớp chẵn bất kể mức độ " +"nhô của chúng." + +msgid "Bridge counterbore holes" +msgstr "Bắc cầu lỗ khoét phản" + +msgid "" +"This option creates bridges for counterbore holes, allowing them to be " +"printed without support. Available modes include:\n" +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" +msgstr "" +"Tùy chọn này tạo cầu cho lỗ khoét phản, cho phép chúng được in mà không cần " +"support. Các chế độ khả dụng bao gồm:\n" +"1. Không: Không tạo cầu\n" +"2. Bắc cầu một phần: Chỉ một phần vùng không được hỗ trợ sẽ được bắc cầu\n" +"3. Lớp hy sinh: Một lớp cầu hy sinh đầy đủ được tạo" + +msgid "Partially bridged" +msgstr "Bắc cầu một phần" + +msgid "Sacrificial layer" +msgstr "Lớp hy sinh" + +msgid "Reverse threshold" +msgstr "Ngưỡng đảo ngược" + +msgid "Overhang reversal threshold" +msgstr "Ngưỡng đảo ngược phần nhô" + +#, no-c-format, no-boost-format +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width.\n" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." +msgstr "" +"Số mm mà phần nhô cần có để đảo ngược được coi là hữu ích. Có thể là % của " +"độ rộng chu vi.\n" +"Giá trị 0 bật đảo ngược trên mọi lớp chẵn bất kể.\n" +"Khi phát hiện thành nhô không được bật, tùy chọn này bị bỏ qua và đảo ngược " +"xảy ra trên mọi lớp chẵn bất kể." + +msgid "Slow down for overhang" +msgstr "Giảm tốc cho phần nhô" + +msgid "Enable this option to slow printing down for different overhang degree." +msgstr "Bật tùy chọn này để giảm tốc độ in cho mức độ nhô khác nhau." + +msgid "Slow down for curled perimeters" +msgstr "Giảm tốc cho chu vi cong" + +#, no-c-format, no-boost-format +msgid "" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." +msgstr "" +"Bật tùy chọn này để giảm tốc độ in trong vùng mà chu vi có thể cong lên " +"trên. Ví dụ, giảm tốc bổ sung sẽ được áp dụng khi in phần nhô trên góc sắc " +"như phía trước thân Benchy, giảm độ cong tích lũy qua nhiều lớp.\n" +"\n" +"Thông thường khuyến nghị bật tùy chọn này trừ khi làm mát máy in của bạn đủ " +"mạnh hoặc tốc độ in đủ chậm để chu vi không cong. Nếu in với tốc độ chu vi " +"bên ngoài cao, tham số này có thể tạo ra khuyết điểm nhỏ khi giảm tốc do sự " +"chênh lệch lớn về tốc độ in. Nếu bạn nhận thấy khuyết điểm, hãy đảm bảo áp " +"suất nâng cao của bạn được điều chỉnh đúng.\n" +"\n" +"Lưu ý: Khi tùy chọn này được bật, chu vi nhô được coi như phần nhô, nghĩa là " +"tốc độ nhô được áp dụng ngay cả khi chu vi nhô là một phần của cầu. Ví dụ, " +"khi chu vi nhô 100% , không có thành hỗ trợ chúng từ bên dưới, tốc độ nhô " +"100% sẽ được áp dụng." + +msgid "mm/s or %" +msgstr "mm/s hoặc %" + +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"Tốc độ của các đùn cầu nhìn thấy từ bên ngoài.\n" +"\n" +"Ngoài ra, nếu Giảm tốc cho chu vi cong bị tắt hoặc chế độ phần nhô cổ điển " +"được bật, nó sẽ là tốc độ in của thành nhô được hỗ trợ dưới 13%, cho dù " +"chúng là một phần của cầu hay phần nhô." + +msgid "Internal" +msgstr "Bên trong" + +msgid "" +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." +msgstr "" +"Tốc độ của cầu bên trong. Nếu giá trị được biểu thị dưới dạng phần trăm, nó " +"sẽ được tính dựa trên bridge_speed. Giá trị mặc định là 150%." + +msgid "Brim width" +msgstr "Độ rộng brim" + +msgid "Distance from model to the outermost brim line." +msgstr "Khoảng cách từ model đến đường brim ngoài cùng." + +msgid "Brim type" +msgstr "Loại brim" + +msgid "" +"This controls the generation of the brim at outer and/or inner side of " +"models. Auto means the brim width is analyzed and calculated automatically." +msgstr "" +"Điều này điều khiển việc tạo brim ở bên ngoài và/hoặc bên trong của model. " +"Tự động có nghĩa là độ rộng brim được phân tích và tính tự động." + +msgid "Brim-object gap" +msgstr "Khoảng cách brim-đối tượng" + +msgid "" +"A gap between innermost brim line and object can make brim be removed more " +"easily." +msgstr "" +"Khoảng cách giữa đường brim trong cùng và đối tượng có thể làm cho brim dễ " +"dàng tháo hơn." + +msgid "Brim ears" +msgstr "Tai brim" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "Chỉ vẽ brim trên các cạnh sắc của model." + +msgid "Brim ear max angle" +msgstr "Góc tối đa tai brim" + +msgid "" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" +"Góc tối đa để cho phép tai brim xuất hiện.\n" +"Nếu đặt thành 0, không có brim nào sẽ được tạo.\n" +"Nếu đặt thành ~180, brim sẽ được tạo trên mọi thứ trừ phần thẳng." + +msgid "Brim ear detection radius" +msgstr "Bán kính phát hiện tai brim" + +msgid "" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." +msgstr "" +"Hình học sẽ được giảm trước khi phát hiện góc sắc. Tham số này chỉ ra độ dài " +"tối thiểu của độ lệch cho việc giảm.\n" +"0 để vô hiệu hóa." + +msgid "Select printers" +msgstr "Chọn máy in" + +msgid "upward compatible machine" +msgstr "máy tương thích ngược" + +msgid "Condition" +msgstr "Điều kiện" + +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"Một biểu thức boolean sử dụng giá trị cấu hình của hồ sơ máy in đang hoạt " +"động. Nếu biểu thức này đánh giá là đúng, hồ sơ này được coi là tương thích " +"với hồ sơ máy in đang hoạt động." + +msgid "Select profiles" +msgstr "Chọn hồ sơ" + +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Một biểu thức boolean sử dụng giá trị cấu hình của hồ sơ in đang hoạt động. " +"Nếu biểu thức này đánh giá là đúng, hồ sơ này được coi là tương thích với hồ " +"sơ in đang hoạt động." + +msgid "Print sequence, layer by layer or object by object." +msgstr "Trình tự in, từng lớp hoặc từng đối tượng." + +msgid "By layer" +msgstr "Theo lớp" + +msgid "By object" +msgstr "Theo đối tượng" + +msgid "Intra-layer order" +msgstr "Thứ tự trong lớp" + +msgid "Print order within a single layer." +msgstr "Thứ tự in trong một lớp đơn." + +msgid "As object list" +msgstr "Như danh sách đối tượng" + +msgid "Slow printing down for better layer cooling" +msgstr "Giảm tốc độ in để làm mát lớp tốt hơn" + +msgid "" +"Enable this option to slow printing speed down to make the final layer time " +"not shorter than the layer time threshold in \"Max fan speed threshold\", so " +"that layer can be cooled for longer time. This can improve the cooling " +"quality for needle and small details." +msgstr "" +"Bật tùy chọn này để giảm tốc độ in xuống để làm cho thời gian lớp cuối cùng " +"không ngắn hơn ngưỡng thời gian lớp trong \"Ngưỡng tốc độ quạt tối đa\", để " +"lớp có thể được làm mát lâu hơn. Điều này có thể cải thiện chất lượng làm " +"mát cho kim và chi tiết nhỏ." + +msgid "Normal printing" +msgstr "In bình thường" + +msgid "" +"The default acceleration of both normal printing and travel except initial " +"layer." +msgstr "" +"Gia tốc mặc định của cả in bình thường và di chuyển ngoại trừ lớp đầu tiên." + +msgid "Default filament profile" +msgstr "Hồ sơ filament mặc định" + +msgid "Default filament profile when switching to this machine profile." +msgstr "Hồ sơ filament mặc định khi chuyển sang hồ sơ máy này." + +msgid "Default process profile" +msgstr "Hồ sơ quy trình mặc định" + +msgid "Default process profile when switching to this machine profile." +msgstr "Hồ sơ quy trình mặc định khi chuyển sang hồ sơ máy này." + +msgid "Activate air filtration" +msgstr "Kích hoạt lọc khí" + +msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" +msgstr "Kích hoạt để lọc khí tốt hơn. Lệnh G-code: M106 P3 S(0-255)" + +msgid "Fan speed" +msgstr "Tốc độ quạt" + +msgid "" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." +msgstr "" +"Tốc độ quạt thải trong khi in. Tốc độ này sẽ ghi đè tốc độ trong G-code tùy " +"chỉnh filament." + +msgid "Speed of exhaust fan after printing completes." +msgstr "Tốc độ quạt thải sau khi in hoàn tất." + +msgid "No cooling for the first" +msgstr "Không làm mát cho" + +msgid "" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." +msgstr "" +"Tắt tất cả quạt làm mát cho vài lớp đầu tiên. Điều này có thể được sử dụng " +"để cải thiện độ bám dính bàn in." + +msgid "Don't support bridges" +msgstr "Không hỗ trợ cầu" + +msgid "" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." +msgstr "" +"Không hỗ trợ toàn bộ vùng cầu làm cho support rất lớn. Cầu thường có thể " +"được in trực tiếp mà không cần support nếu không quá dài." + +msgid "Thick external bridges" +msgstr "Cầu bên ngoài dày" + +msgid "" +"If enabled, bridges are more reliable, can bridge longer distances, but may " +"look worse. If disabled, bridges look better but are reliable just for " +"shorter bridged distances." +msgstr "" +"Nếu được bật, cầu đáng tin cậy hơn, có thể bắc cầu khoảng cách dài hơn, " +"nhưng có thể trông xấu hơn. Nếu bị tắt, cầu trông đẹp hơn nhưng chỉ đáng tin " +"cậy cho khoảng cách bắc cầu ngắn hơn." + +msgid "Thick internal bridges" +msgstr "Cầu bên trong dày" + +msgid "" +"If enabled, thick internal bridges will be used. It's usually recommended to " +"have this feature turned on. However, consider turning it off if you are " +"using large nozzles." +msgstr "" +"Nếu được bật, cầu bên trong dày sẽ được sử dụng. Thường khuyến nghị bật tính " +"năng này. Tuy nhiên, hãy cân nhắc tắt nó nếu bạn đang sử dụng đầu phun lớn." + +msgid "Extra bridge layers (beta)" +msgstr "Lớp cầu bổ sung (beta)" + +msgid "" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" +"\n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" +"\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" +"\n" +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" +msgstr "" +"Tùy chọn này cho phép tạo lớp cầu bổ sung trên cầu bên trong và/hoặc bên " +"ngoài.\n" +"\n" +"Lớp cầu bổ sung giúp cải thiện hình thức và độ tin cậy của cầu, vì infill " +"đặc được hỗ trợ tốt hơn. Điều này đặc biệt hữu ích trong máy in nhanh, nơi " +"tốc độ cầu và infill đặc khác nhau rất nhiều. Lớp cầu bổ sung dẫn đến giảm " +"hiện tượng gối trên bề mặt trên, cũng như giảm sự tách rời của lớp cầu bên " +"ngoài khỏi chu vi xung quanh.\n" +"\n" +"Thông thường khuyến nghị đặt điều này ít nhất là 'Chỉ cầu bên ngoài', trừ " +"khi tìm thấy vấn đề cụ thể với model đã slice.\n" +"\n" +"Tùy chọn:\n" +"1. Tắt - không tạo lớp cầu thứ hai. Đây là mặc định và được đặt cho mục đích " +"tương thích\n" +"2. Chỉ cầu bên ngoài - tạo lớp cầu thứ hai chỉ cho cầu hướng ra ngoài. Vui " +"lòng lưu ý rằng cầu nhỏ ngắn hơn hoặc hẹp hơn số chu vi đã đặt sẽ bị bỏ qua " +"vì chúng sẽ không được lợi từ lớp cầu thứ hai. Nếu được tạo, lớp cầu thứ hai " +"sẽ được đùn song song với lớp cầu đầu tiên để củng cố độ bền cầu\n" +"3. Chỉ cầu bên trong - tạo lớp cầu thứ hai chỉ cho cầu bên trong trên infill " +"thưa. Vui lòng lưu ý rằng cầu bên trong tính vào số lớp vỏ trên của model " +"của bạn. Lớp cầu bên trong thứ hai sẽ được đùn càng vuông góc với lớp đầu " +"tiên càng tốt. Nếu nhiều vùng trong cùng đảo, với góc cầu khác nhau có mặt, " +"vùng cuối cùng của đảo đó sẽ được chọn làm tham chiếu góc\n" +"4. Áp dụng cho tất cả - tạo lớp cầu thứ hai cho cả cầu bên trong và hướng ra " +"ngoài\n" + +msgid "Disabled" +msgstr "Tắt" + +msgid "External bridge only" +msgstr "Chỉ cầu bên ngoài" + +msgid "Internal bridge only" +msgstr "Chỉ cầu bên trong" + +msgid "Apply to all" +msgstr "Áp dụng cho tất cả" + +msgid "Filter out small internal bridges" +msgstr "Lọc bỏ cầu bên trong nhỏ" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"Tùy chọn này có thể giúp giảm hiện tượng gối trên bề mặt trên trong model " +"nghiêng mạnh hoặc cong.\n" +"Theo mặc định, cầu bên trong nhỏ bị lọc bỏ và infill đặc bên trong được in " +"trực tiếp trên infill thưa. Điều này hoạt động tốt trong hầu hết trường hợp, " +"tăng tốc in mà không ảnh hưởng quá nhiều đến chất lượng bề mặt trên.\n" +"Tuy nhiên, trong model nghiêng mạnh hoặc cong, đặc biệt khi mật độ infill " +"thưa quá thấp được sử dụng, điều này có thể dẫn đến cong của infill đặc " +"không được hỗ trợ, gây ra hiện tượng gối.\n" +"Bật lọc giới hạn hoặc không lọc sẽ in lớp cầu bên trong trên infill đặc bên " +"trong không được hỗ trợ một chút. Các tùy chọn bên dưới điều khiển độ nhạy " +"của việc lọc, tức là chúng điều khiển nơi cầu bên trong được tạo:\n" +"1. Lọc - bật tùy chọn này. Đây là hành vi mặc định và hoạt động tốt trong " +"hầu hết trường hợp\n" +"2. Lọc giới hạn - tạo cầu bên trong trên bề mặt nghiêng mạnh trong khi tránh " +"cầu không cần thiết. Điều này hoạt động tốt cho hầu hết model khó\n" +"3. Không lọc - tạo cầu bên trong trên mọi phần nhô bên trong tiềm năng. Tùy " +"chọn này hữu ích cho model bề mặt trên nghiêng mạnh; tuy nhiên, trong hầu " +"hết trường hợp, nó tạo quá nhiều cầu không cần thiết" + +msgid "Limited filtering" +msgstr "Lọc giới hạn" + +msgid "No filtering" +msgstr "Không lọc" + +msgid "Max bridge length" +msgstr "Độ dài cầu tối đa" + +msgid "" +"Max length of bridges that don't need support. Set it to 0 if you want all " +"bridges to be supported, and set it to a very large value if you don't want " +"any bridges to be supported." +msgstr "" +"Độ dài tối đa của cầu không cần support. Đặt thành 0 nếu bạn muốn tất cả cầu " +"được hỗ trợ, và đặt thành giá trị rất lớn nếu bạn không muốn bất kỳ cầu nào " +"được hỗ trợ." + +msgid "End G-code" +msgstr "G-code kết thúc" + +msgid "End G-code when finishing the entire print." +msgstr "G-code kết thúc khi hoàn thành toàn bộ bản in." + +msgid "Between Object G-code" +msgstr "G-code giữa đối tượng" + +msgid "" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." +msgstr "" +"Chèn G-code giữa các đối tượng. Tham số này sẽ chỉ có hiệu lực khi bạn in " +"model của mình từng đối tượng." + +msgid "End G-code when finishing the printing of this filament." +msgstr "G-code kết thúc khi hoàn thành in filament này." + +msgid "Ensure vertical shell thickness" +msgstr "Đảm bảo độ dày vỏ dọc" + +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers)\n" +"None: No solid infill will be added anywhere. Caution: Use this option " +"carefully if your model has sloped surfaces\n" +"Critical Only: Avoid adding solid infill for walls\n" +"Moderate: Add solid infill for heavily sloping surfaces only\n" +"All: Add solid infill for all suitable sloping surfaces\n" +"Default value is All." +msgstr "" +"Thêm infill đặc gần bề mặt dốc để đảm bảo độ dày vỏ dọc (lớp đặc trên+dưới)\n" +"Không: Không có infill đặc nào sẽ được thêm ở bất cứ đâu. Cảnh báo: Sử dụng " +"tùy chọn này cẩn thận nếu model của bạn có bề mặt dốc\n" +"Chỉ quan trọng: Tránh thêm infill đặc cho thành\n" +"Vừa phải: Chỉ thêm infill đặc cho bề mặt dốc mạnh\n" +"Tất cả: Thêm infill đặc cho tất cả bề mặt dốc phù hợp\n" +"Giá trị mặc định là Tất cả." + +msgid "Critical Only" +msgstr "Chỉ quan trọng" + +msgid "Moderate" +msgstr "Vừa phải" + +msgid "Top surface pattern" +msgstr "Mẫu bề mặt trên" + +msgid "Line pattern of top surface infill." +msgstr "Mẫu đường của infill bề mặt trên." + +msgid "Monotonic" +msgstr "Đơn điệu" + +msgid "Monotonic line" +msgstr "Đường đơn điệu" + +msgid "Rectilinear" +msgstr "Thẳng hàng" + +msgid "Aligned Rectilinear" +msgstr "Thẳng hàng căn chỉnh" + +msgid "Concentric" +msgstr "Đồng tâm" + +msgid "Hilbert Curve" +msgstr "Đường cong Hilbert" + +msgid "Archimedean Chords" +msgstr "Dây cung Archimedes" + +msgid "Octagram Spiral" +msgstr "Xoắn ốc bát giác" + +msgid "Bottom surface pattern" +msgstr "Mẫu bề mặt dưới" + +msgid "Line pattern of bottom surface infill, not bridge infill." +msgstr "Mẫu đường của infill bề mặt dưới, không phải infill cầu." + +msgid "Internal solid infill pattern" +msgstr "Mẫu infill đặc bên trong" + +msgid "" +"Line pattern of internal solid infill. if the detect narrow internal solid " +"infill be enabled, the concentric pattern will be used for the small area." +msgstr "" +"Mẫu đường của infill đặc bên trong. nếu phát hiện infill đặc bên trong hẹp " +"được bật, mẫu đồng tâm sẽ được sử dụng cho vùng nhỏ." + +msgid "" +"Line width of outer wall. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" +"Độ rộng đường của thành ngoài. Nếu được biểu thị dưới dạng %, nó sẽ được " +"tính trên đường kính đầu phun." + +msgid "" +"Speed of outer wall which is outermost and visible. It's used to be slower " +"than inner wall speed to get better quality." +msgstr "" +"Tốc độ của thành ngoài là ngoài cùng và nhìn thấy được. Nó được sử dụng để " +"chậm hơn tốc độ thành trong để có chất lượng tốt hơn." + +msgid "Small perimeters" +msgstr "Chu vi nhỏ" + +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"small_perimeter_threshold (usually holes). If expressed as percentage (for " +"example: 80%) it will be calculated on the outer wall speed setting above. " +"Set to zero for auto." +msgstr "" +"Cài đặt riêng biệt này sẽ ảnh hưởng đến tốc độ của chu vi có bán kính <= " +"small_perimeter_threshold (thường là lỗ). Nếu được biểu thị dưới dạng phần " +"trăm (ví dụ: 80%) nó sẽ được tính trên cài đặt tốc độ thành ngoài ở trên. " +"Đặt thành không để tự động." + +msgid "Small perimeters threshold" +msgstr "Ngưỡng chu vi nhỏ" + +msgid "" +"This sets the threshold for small perimeter length. Default threshold is 0mm." +msgstr "Điều này đặt ngưỡng cho độ dài chu vi nhỏ. Ngưỡng mặc định là 0mm." + +msgid "Walls printing order" +msgstr "Thứ tự in thành" + +msgid "" +"Print sequence of the internal (inner) and external (outer) walls.\n" +"\n" +"Use Inner/Outer for best overhangs. This is because the overhanging walls " +"can adhere to a neighbouring perimeter while printing. However, this option " +"results in slightly reduced surface quality as the external perimeter is " +"deformed by being squashed to the internal perimeter.\n" +"\n" +"Use Inner/Outer/Inner for the best external surface finish and dimensional " +"accuracy as the external wall is printed undisturbed from an internal " +"perimeter. However, overhang performance will reduce as there is no internal " +"perimeter to print the external wall against. This option requires a minimum " +"of 3 walls to be effective as it prints the internal walls from the 3rd " +"perimeter onwards first, then the external perimeter and, finally, the first " +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" +"\n" +"Use Outer/Inner for the same external wall quality and dimensional accuracy " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " +"consistent as the first extrusion of a new layer starts on a visible " +"surface." +msgstr "" +"Trình tự in của thành bên trong (trong) và bên ngoài (ngoài).\n" +"\n" +"Sử dụng Trong/Ngoài cho phần nhô tốt nhất. Điều này là do thành nhô có thể " +"bám dính vào chu vi lân cận trong khi in. Tuy nhiên, tùy chọn này dẫn đến " +"chất lượng bề mặt giảm một chút vì chu vi bên ngoài bị biến dạng do bị ép " +"vào chu vi bên trong.\n" +"\n" +"Sử dụng Trong/Ngoài/Trong để có bề mặt ngoài hoàn thiện tốt nhất và độ chính " +"xác kích thước vì thành ngoài được in không bị xáo trộn từ chu vi bên trong. " +"Tuy nhiên, hiệu suất phần nhô sẽ giảm vì không có chu vi bên trong để in " +"thành ngoài tựa vào. Tùy chọn này yêu cầu tối thiểu 3 thành để có hiệu quả " +"vì nó in các thành bên trong từ chu vi thứ 3 trở đi trước, sau đó là chu vi " +"bên ngoài và cuối cùng là chu vi bên trong đầu tiên. Tùy chọn này được " +"khuyến nghị thay cho tùy chọn Ngoài/Trong trong hầu hết các trường hợp.\n" +"\n" +"Sử dụng Ngoài/Trong để có cùng chất lượng thành ngoài và độ chính xác kích " +"thước như tùy chọn Trong/Ngoài/Trong. Tuy nhiên, các đường nối Z sẽ xuất " +"hiện kém nhất quán hơn vì đùn đầu tiên của lớp mới bắt đầu trên bề mặt nhìn " +"thấy." + +msgid "Inner/Outer" +msgstr "Trong/Ngoài" + +msgid "Outer/Inner" +msgstr "Ngoài/Trong" + +msgid "Inner/Outer/Inner" +msgstr "Trong/Ngoài/Trong" + +msgid "Print infill first" +msgstr "In infill trước" + +msgid "" +"Order of wall/infill. When the tickbox is unchecked the walls are printed " +"first, which works best in most cases.\n" +"\n" +"Printing infill first may help with extreme overhangs as the walls have the " +"neighbouring infill to adhere to. However, the infill will slightly push out " +"the printed walls where it is attached to them, resulting in a worse " +"external surface finish. It can also cause the infill to shine through the " +"external surfaces of the part." +msgstr "" +"Thứ tự thành/infill. Khi hộp kiểm không được chọn, thành được in trước, hoạt " +"động tốt nhất trong hầu hết các trường hợp.\n" +"\n" +"In infill trước có thể giúp với phần nhô cực đoan vì thành có infill lân cận " +"để bám dính. Tuy nhiên, infill sẽ đẩy ra ngoài một chút các thành đã in nơi " +"nó được gắn vào chúng, dẫn đến bề mặt ngoài hoàn thiện xấu hơn. Nó cũng có " +"thể làm cho infill chiếu xuyên qua bề mặt ngoài của phần." + +msgid "Wall loop direction" +msgstr "Hướng vòng thành" + +msgid "" +"The direction which the wall loops are extruded when looking down from the " +"top.\n" +"\n" +"By default all walls are extruded in counter-clockwise, unless Reverse on " +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" +"\n" +"This option will be disabled if spiral vase mode is enabled." +msgstr "" +"Hướng mà các vòng thành được đùn khi nhìn xuống từ trên.\n" +"\n" +"Theo mặc định tất cả thành được đùn ngược chiều kim đồng hồ, trừ khi Đảo " +"ngược trên lớp chẵn được bật. Đặt điều này thành bất kỳ tùy chọn nào khác " +"ngoài Tự động sẽ ép buộc hướng thành bất kể Đảo ngược trên lớp chẵn.\n" +"\n" +"Tùy chọn này sẽ bị tắt nếu chế độ bình xoắn ốc được bật." + +msgid "Counter clockwise" +msgstr "Ngược chiều kim đồng hồ" + +msgid "Clockwise" +msgstr "Cùng chiều kim đồng hồ" + +msgid "Height to rod" +msgstr "Chiều cao đến thanh" + +msgid "" +"Distance of the nozzle tip to the lower rod. Used for collision avoidance in " +"by-object printing." +msgstr "" +"Khoảng cách từ đầu phun đến thanh dưới. Được sử dụng để tránh va chạm trong " +"in theo đối tượng." + +msgid "Height to lid" +msgstr "Chiều cao đến nắp" + +msgid "" +"Distance of the nozzle tip to the lid. Used for collision avoidance in by-" +"object printing." +msgstr "" +"Khoảng cách từ đầu phun đến nắp. Được sử dụng để tránh va chạm trong in theo " +"đối tượng." + +msgid "" +"Clearance radius around extruder. Used for collision avoidance in by-object " +"printing." +msgstr "" +"Bán kính khoảng trống xung quanh extruder. Được sử dụng để tránh va chạm " +"trong in theo đối tượng." + +msgid "Nozzle height" +msgstr "Chiều cao đầu phun" + +msgid "The height of nozzle tip." +msgstr "Chiều cao của đầu phun." + +msgid "Bed mesh min" +msgstr "Lưới bàn in tối thiểu" + +msgid "" +"This option sets the min point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. Snapmaker Orca " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (-99999, -99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" +"Tùy chọn này đặt điểm tối thiểu cho vùng lưới bàn in được cho phép. Do độ " +"lệch XY của đầu dò, hầu hết máy in không thể dò toàn bộ bàn. Để đảm bảo điểm " +"dò không ra ngoài vùng bàn, điểm tối thiểu và tối đa của lưới bàn in nên " +"được đặt phù hợp. Snapmaker Orca đảm bảo rằng giá trị adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max không vượt quá các điểm tối thiểu/tối đa này. Thông " +"tin này thường có thể được lấy từ nhà sản xuất máy in của bạn. Cài đặt mặc " +"định là (-99999, -99999), có nghĩa là không có giới hạn, do đó cho phép dò " +"trên toàn bộ bàn." + +msgid "Bed mesh max" +msgstr "Lưới bàn in tối đa" + +msgid "" +"This option sets the max point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. Snapmaker Orca " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (99999, 99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" +"Tùy chọn này đặt điểm tối đa cho vùng lưới bàn in được cho phép. Do độ lệch " +"XY của đầu dò, hầu hết máy in không thể dò toàn bộ bàn. Để đảm bảo điểm dò " +"không ra ngoài vùng bàn, điểm tối thiểu và tối đa của lưới bàn in nên được " +"đặt phù hợp. Snapmaker Orca đảm bảo rằng giá trị adaptive_bed_mesh_min/" +"adaptive_bed_mesh_max không vượt quá các điểm tối thiểu/tối đa này. Thông " +"tin này thường có thể được lấy từ nhà sản xuất máy in của bạn. Cài đặt mặc " +"định là (99999, 99999), có nghĩa là không có giới hạn, do đó cho phép dò " +"trên toàn bộ bàn." + +msgid "Probe point distance" +msgstr "Khoảng cách điểm dò" + +msgid "" +"This option sets the preferred distance between probe points (grid size) for " +"the X and Y directions, with the default being 50mm for both X and Y." +msgstr "" +"Tùy chọn này đặt khoảng cách ưa thích giữa các điểm dò (kích thước lưới) cho " +"hướng X và Y, với mặc định là 50mm cho cả X và Y." + +msgid "Mesh margin" +msgstr "Lề lưới" + +msgid "" +"This option determines the additional distance by which the adaptive bed " +"mesh area should be expanded in the XY directions." +msgstr "" +"Tùy chọn này xác định khoảng cách bổ sung mà vùng lưới bàn in thích ứng nên " +"được mở rộng theo hướng XY." + +msgid "Grab length" +msgstr "" + +msgid "Extruder Color" +msgstr "Màu extruder" + +msgid "Only used as a visual help on UI." +msgstr "Chỉ được sử dụng như một trợ giúp trực quan trên giao diện." + +msgid "Extruder offset" +msgstr "Độ lệch extruder" + +msgid "Flow ratio" +msgstr "Tỷ lệ lưu lượng" + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." +msgstr "" +"Vật liệu có thể có thay đổi thể tích sau khi chuyển đổi giữa trạng thái nóng " +"chảy và kết tinh. Cài đặt này thay đổi tất cả lưu lượng đùn của filament này " +"trong G-code theo tỷ lệ. Phạm vi giá trị được khuyến nghị là giữa 0.95 và " +"1.05. Bạn có thể điều chỉnh giá trị này để có bề mặt phẳng đẹp nếu có dư " +"hoặc thiếu nhỏ." + +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"Vật liệu có thể có thay đổi thể tích sau khi chuyển đổi giữa trạng thái nóng " +"chảy và kết tinh. Cài đặt này thay đổi tất cả lưu lượng đùn của filament này " +"trong G-code theo tỷ lệ. Phạm vi giá trị được khuyến nghị là giữa 0.95 và " +"1.05. Bạn có thể điều chỉnh giá trị này để có bề mặt phẳng đẹp nếu có dư " +"hoặc thiếu nhỏ.\n" +"\n" +"Tỷ lệ lưu lượng đối tượng cuối cùng là giá trị này nhân với tỷ lệ lưu lượng " +"filament." + +msgid "Enable pressure advance" +msgstr "Bật áp suất nâng cao" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " +"enabled." +msgstr "" +"Bật áp suất nâng cao, kết quả hiệu chỉnh tự động sẽ bị ghi đè khi được bật." + +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "Áp suất nâng cao (Klipper) hay Hệ số linear advance (Marlin)." + +msgid "Enable adaptive pressure advance (beta)" +msgstr "Bật áp suất nâng cao thích ứng (beta)" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"Với tốc độ in tăng lên (và do đó lưu lượng thể tích qua đầu phun tăng lên) " +"và gia tốc tăng lên, đã quan sát thấy rằng giá trị PA hiệu quả thường giảm " +"xuống. Điều này có nghĩa là một giá trị PA duy nhất không phải lúc nào cũng " +"tối ưu 100% cho tất cả tính năng và giá trị thỏa hiệp thường được sử dụng " +"không gây ra quá nhiều phồng trên tính năng với tốc độ lưu lượng thấp hơn và " +"gia tốc trong khi cũng không gây ra khe hở trên tính năng nhanh hơn.\n" +"\n" +"Tính năng này nhằm giải quyết hạn chế này bằng cách mô hình hóa phản ứng của " +"hệ thống đùn của máy in tùy thuộc vào tốc độ lưu lượng thể tích và gia tốc " +"mà nó đang in. Bên trong, nó tạo ra một model phù hợp có thể ngoại suy áp " +"suất nâng cao cần thiết cho bất kỳ tốc độ lưu lượng thể tích và gia tốc nào, " +"sau đó được phát ra máy in tùy thuộc vào điều kiện in hiện tại.\n" +"\n" +"Khi được bật, giá trị áp suất nâng cao ở trên bị ghi đè. Tuy nhiên, giá trị " +"mặc định hợp lý ở trên được khuyến nghị mạnh để hoạt động như dự phòng và " +"khi thay đổi công cụ.\n" +"\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "Đo áp suất nâng cao thích ứng (beta)" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"Thêm bộ giá trị áp suất nâng cao (PA), tốc độ lưu lượng thể tích và gia tốc " +"chúng được đo, ngăn cách bằng dấu phẩy. Một bộ giá trị trên mỗi dòng. Ví dụ\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"Cách hiệu chỉnh:\n" +"1. Chạy kiểm tra áp suất nâng cao cho ít nhất 3 tốc độ cho mỗi giá trị gia " +"tốc. Khuyến nghị kiểm tra được chạy ít nhất cho tốc độ của chu vi bên ngoài, " +"tốc độ của chu vi bên trong và tốc độ in tính năng nhanh nhất trong hồ sơ " +"của bạn (thường là infill thưa hoặc đặc ). Sau đó chạy chúng cho cùng tốc độ " +"cho gia tốc in chậm nhất và nhanh nhất , và không nhanh hơn gia tốc tối đa " +"được khuyến nghị như được đưa ra bởi input shaper Klipper\n" +"2. Ghi chú giá trị PA tối ưu cho mỗi tốc độ lưu lượng thể tích và gia tốc. " +"Bạn có thể tìm số lưu lượng bằng cách chọn lưu lượng từ menu thả xuống sơ đồ " +"màu và di chuyển thanh trượt ngang qua các đường mẫu PA. Số nên hiển thị ở " +"cuối trang. Giá trị PA lý tưởng nên giảm xuống khi lưu lượng thể tích càng " +"cao. Nếu không, hãy xác nhận rằng extruder của bạn đang hoạt động chính xác. " +"Càng chậm và với gia tốc ít hơn bạn in, phạm vi giá trị PA chấp nhận được " +"càng lớn. Nếu không thấy sự khác biệt, hãy sử dụng giá trị PA từ kiểm tra " +"nhanh hơn\n" +"3. Nhập bộ ba giá trị PA, Lưu lượng và Gia tốc vào hộp văn bản ở đây và lưu " +"hồ sơ filament của bạn" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "Bật áp suất nâng cao thích ứng cho phần nhô (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"Bật PA thích ứng cho phần nhô cũng như khi lưu lượng thay đổi trong cùng " +"tính năng. Đây là tùy chọn thử nghiệm, vì nếu hồ sơ PA không được đặt chính " +"xác, nó sẽ gây ra vấn đề đồng đều trên bề mặt ngoài trước và sau phần nhô.\n" + +msgid "Pressure advance for bridges" +msgstr "Áp suất nâng cao cho cầu" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"Giá trị áp suất nâng cao cho cầu. Đặt thành 0 để tắt.\n" +"\n" +"Giá trị PA thấp hơn khi in cầu giúp giảm sự xuất hiện của đùn thiếu nhỏ ngay " +"sau cầu. Điều này được gây ra bởi áp suất giảm trong đầu phun khi in trong " +"không khí và PA thấp hơn giúp chống lại điều này." + +msgid "" +"Default line width if other line widths are set to 0. If expressed as a %, " +"it will be computed over the nozzle diameter." +msgstr "" +"Độ rộng đường mặc định nếu độ rộng đường khác được đặt thành 0. Nếu được " +"biểu thị dưới dạng %, nó sẽ được tính trên đường kính đầu phun." + +msgid "Keep fan always on" +msgstr "Giữ quạt luôn bật" + +msgid "" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." +msgstr "" +"Bật cài đặt này có nghĩa là quạt làm mát phần sẽ không bao giờ dừng hoàn " +"toàn và sẽ chạy ít nhất ở tốc độ tối thiểu để giảm tần suất khởi động và " +"dừng." + +msgid "Don't slow down outer walls" +msgstr "Không giảm tốc thành ngoài" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"1. To avoid changes in shine when printing glossy filaments\n" +"2. To avoid changes in external wall speed which may create slight wall " +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" +msgstr "" +"Nếu được bật, cài đặt này sẽ đảm bảo chu vi bên ngoài không bị giảm tốc để " +"đáp ứng thời gian lớp tối thiểu. Điều này đặc biệt hữu ích trong các trường " +"hợp sau:\n" +"1. Để tránh thay đổi độ bóng khi in filament bóng\n" +"2. Để tránh thay đổi tốc độ thành ngoài có thể tạo ra khuyết điểm thành nhỏ " +"trông giống như vằn Z\n" +"3. Để tránh in ở tốc độ gây ra VFA (khuyết điểm mịn) trên thành ngoài" + +msgid "Layer time" +msgstr "Thời gian lớp" + +msgid "" +"Part cooling fan will be enabled for layers of which estimated time is " +"shorter than this value. Fan speed is interpolated between the minimum and " +"maximum fan speeds according to layer printing time." +msgstr "" +"Quạt làm mát phần sẽ được bật cho các lớp có thời gian ước tính ngắn hơn giá " +"trị này. Tốc độ quạt được nội suy giữa tốc độ quạt tối thiểu và tối đa theo " +"thời gian in lớp." + +msgid "Default color" +msgstr "Màu mặc định" + +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"Màu filament mặc định.\n" +"Nhấp chuột phải để đặt lại giá trị về mặc định hệ thống." + +msgid "Filament notes" +msgstr "Ghi chú filament" + +msgid "You can put your notes regarding the filament here." +msgstr "Bạn có thể đặt ghi chú về filament ở đây." + +msgid "Required nozzle HRC" +msgstr "HRC đầu phun yêu cầu" + +msgid "" +"Minimum HRC of nozzle required to print the filament. Zero means no checking " +"of nozzle's HRC." +msgstr "" +"HRC tối thiểu của đầu phun cần để in filament. Không có nghĩa là không kiểm " +"tra HRC của đầu phun." + +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + +msgid "" +"This setting stands for how much volume of filament can be melted and " +"extruded per second. Printing speed is limited by max volumetric speed, in " +"case of too high and unreasonable speed setting. Can't be zero." +msgstr "" +"Cài đặt này biểu thị bao nhiêu thể tích filament có thể được nóng chảy và " +"đùn mỗi giây. Tốc độ in bị giới hạn bởi tốc độ thể tích tối đa, trong trường " +"hợp cài đặt tốc độ quá cao và không hợp lý. Không thể bằng không." + +msgid "Filament load time" +msgstr "Thời gian nạp filament" + +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"Thời gian nạp filament mới khi thay filament. Nó thường áp dụng cho máy đa " +"vật liệu extruder đơn. Đối với máy thay công cụ hoặc máy đa công cụ , nó " +"thường là 0. Chỉ cho thống kê." + +msgid "Filament unload time" +msgstr "Thời gian tháo filament" + +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"Thời gian tháo filament cũ khi thay filament. Nó thường áp dụng cho máy đa " +"vật liệu extruder đơn. Đối với máy thay công cụ hoặc máy đa công cụ , nó " +"thường là 0. Chỉ cho thống kê." + +msgid "Tool change time" +msgstr "Thời gian thay công cụ" + +msgid "" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"Thời gian để thay công cụ. Nó thường áp dụng cho máy thay công cụ hoặc máy " +"đa công cụ. Đối với máy đa vật liệu extruder đơn, nó thường là 0. Chỉ cho " +"thống kê." + +msgid "Bed temperature type" +msgstr "" + +msgid "" +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "" +"Đường kính filament được sử dụng để tính toán đùn trong G-code, vì vậy nó " +"quan trọng và phải chính xác." + +msgid "Pellet flow coefficient" +msgstr "Hệ số lưu lượng viên" + +msgid "" +"Pellet flow coefficient is empirically derived and allows for volume " +"calculation for pellet printers.\n" +"\n" +"Internally it is converted to filament_diameter. All other volume " +"calculations remain the same.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" +msgstr "" +"Hệ số lưu lượng viên được suy ra theo kinh nghiệm và cho phép tính toán thể " +"tích cho máy in viên.\n" +"\n" +"Bên trong nó được chuyển đổi thành filament_diameter. Tất cả các tính toán " +"thể tích khác vẫn giữ nguyên.\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" + +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "Co ngót (XY)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" +"Nhập phần trăm co ngót mà filament sẽ có sau khi làm mát (94% nếu bạn đo " +"94mm thay vì 100mm). Phần sẽ được tỷ lệ trong XY để bù. Chỉ filament được sử " +"dụng cho chu vi được tính.\n" +"Hãy chắc chắn để đủ khoảng cách giữa các đối tượng, vì bù này được thực hiện " +"sau khi kiểm tra." + +msgid "Shrinkage (Z)" +msgstr "Co ngót (Z)" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"Nhập phần trăm co ngót mà filament sẽ có sau khi làm mát (94% nếu bạn đo " +"94mm thay vì 100mm). Phần sẽ được tỷ lệ trong Z để bù." + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + +msgid "Loading speed" +msgstr "Tốc độ nạp" + +msgid "Speed used for loading the filament on the wipe tower." +msgstr "Tốc độ được sử dụng để nạp filament trên wipe tower." + +msgid "Loading speed at the start" +msgstr "Tốc độ nạp lúc bắt đầu" + +msgid "Speed used at the very beginning of loading phase." +msgstr "Tốc độ được sử dụng ở đầu giai đoạn nạp." + +msgid "Unloading speed" +msgstr "Tốc độ tháo" + +msgid "" +"Speed used for unloading the filament on the wipe tower (does not affect " +"initial part of unloading just after ramming)." +msgstr "" +"Tốc độ được sử dụng để tháo filament trên wipe tower (không ảnh hưởng phần " +"đầu của tháo ngay sau ramming)." + +msgid "Unloading speed at the start" +msgstr "Tốc độ tháo lúc bắt đầu" + +msgid "" +"Speed used for unloading the tip of the filament immediately after ramming." +msgstr "Tốc độ được sử dụng để tháo đầu filament ngay sau ramming." + +msgid "Delay after unloading" +msgstr "Trễ sau khi tháo" + +msgid "" +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " +"original dimensions." +msgstr "" +"Thời gian chờ sau khi filament được tháo. Có thể giúp thay công cụ đáng tin " +"cậy với vật liệu đàn hồi có thể cần nhiều thời gian hơn để co về kích thước " +"ban đầu." + +msgid "Number of cooling moves" +msgstr "Số lượng động tác làm mát" + +msgid "" +"Filament is cooled by being moved back and forth in the cooling tubes. " +"Specify desired number of these moves." +msgstr "" +"Filament được làm mát bằng cách di chuyển qua lại trong ống làm mát. Chỉ " +"định số lượng động tác này mong muốn." + +msgid "Stamping loading speed" +msgstr "Tốc độ nạp đóng dấu" + +msgid "Speed used for stamping." +msgstr "Tốc độ được sử dụng để đóng dấu." + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "Khoảng cách đóng dấu đo từ tâm ống làm mát" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"Nếu đặt thành giá trị khác không, filament được di chuyển về phía đầu phun " +"giữa các động tác làm mát riêng lẻ (\"đóng dấu\"). Tùy chọn này cấu hình " +"khoảng cách động tác này nên là bao nhiêu trước khi filament được rút lại." + +msgid "Speed of the first cooling move" +msgstr "Tốc độ của động tác làm mát đầu tiên" + +msgid "Cooling moves are gradually accelerating beginning at this speed." +msgstr "Các động tác làm mát dần dần tăng tốc bắt đầu ở tốc độ này." + +msgid "Minimal purge on wipe tower" +msgstr "Xả tối thiểu trên wipe tower" + +msgid "" +"After a tool change, the exact position of the newly loaded filament inside " +"the nozzle may not be known, and the filament pressure is likely not yet " +"stable. Before purging the print head into an infill or a sacrificial " +"object, Snapmaker Orca will always prime this amount of material into the wipe " +"tower to produce successive infill or sacrificial object extrusions reliably." +msgstr "" +"Sau khi thay công cụ, vị trí chính xác của filament mới được nạp bên trong " +"đầu phun có thể không được biết, và áp suất filament có thể chưa ổn định. " +"Trước khi xả đầu in vào infill hoặc đối tượng hy sinh, Snapmaker Orca sẽ luôn " +"nạp lượng vật liệu này vào wipe tower để tạo ra các đùn infill hoặc đối " +"tượng hy sinh liên tiếp một cách đáng tin cậy." + +msgid "Speed of the last cooling move" +msgstr "Tốc độ của động tác làm mát cuối cùng" + +msgid "Cooling moves are gradually accelerating towards this speed." +msgstr "Các động tác làm mát dần dần tăng tốc hướng đến tốc độ này." + +msgid "Ramming parameters" +msgstr "Tham số ramming" + +msgid "" +"This string is edited by RammingDialog and contains ramming specific " +"parameters." +msgstr "" +"Chuỗi này được chỉnh sửa bởi RammingDialog và chứa các tham số cụ thể của " +"ramming." + +msgid "Enable ramming for multi-tool setups" +msgstr "Bật ramming cho thiết lập đa công cụ" + +msgid "" +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." +msgstr "" +"Thực hiện ramming khi sử dụng máy in đa công cụ (tức là khi 'Đa vật liệu " +"extruder đơn' trong Cài đặt máy in không được chọn). Khi được chọn, một " +"lượng nhỏ filament được đùn nhanh trên wipe tower ngay trước khi thay công " +"cụ. Tùy chọn này chỉ được sử dụng khi wipe tower được bật." + +msgid "Multi-tool ramming volume" +msgstr "Thể tích ramming đa công cụ" + +msgid "The volume to be rammed before the tool change." +msgstr "Thể tích được ram trước khi thay công cụ." + +msgid "Multi-tool ramming flow" +msgstr "Lưu lượng ramming đa công cụ" + +msgid "Flow used for ramming the filament before the tool change." +msgstr "Lưu lượng được sử dụng để ram filament trước khi thay công cụ." + +msgid "Density" +msgstr "Mật độ" + +msgid "Filament density. For statistics only." +msgstr "Mật độ filament. Chỉ cho thống kê." + +msgid "The material type of filament." +msgstr "Loại vật liệu của filament." + +msgid "Soluble material" +msgstr "Vật liệu hòa tan" + +msgid "" +"Soluble material is commonly used to print supports and support interfaces." +msgstr "" +"Vật liệu hòa tan thường được sử dụng để in support và giao diện support." + +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + +msgid "Support material" +msgstr "Vật liệu support" + +msgid "" +"Support material is commonly used to print supports and support interfaces." +msgstr "" +"Vật liệu support thường được sử dụng để in support và giao diện support." + +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + +msgid "Softening temperature" +msgstr "Nhiệt độ làm mềm" + +msgid "" +"The material softens at this temperature, so when the bed temperature is " +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." +msgstr "" +"Vật liệu làm mềm ở nhiệt độ này, vì vậy khi nhiệt độ bàn bằng hoặc lớn hơn " +"điều này, rất khuyến nghị mở cửa trước và/hoặc tháo kính trên để tránh tắc " +"nghẽn." + +msgid "Price" +msgstr "Giá" + +msgid "Filament price. For statistics only." +msgstr "Giá filament. Chỉ cho thống kê." + +msgid "money/kg" +msgstr "tiền/kg" + +msgid "Vendor" +msgstr "Nhà cung cấp" + +msgid "Vendor of filament. For show only." +msgstr "Nhà cung cấp filament. Chỉ để hiển thị." + +msgid "(Undefined)" +msgstr "(Không xác định)" + +msgid "Sparse infill direction" +msgstr "Hướng infill thưa" + +msgid "" +"Angle for sparse infill pattern, which controls the start or main direction " +"of line." +msgstr "" +"Góc cho mẫu infill thưa, điều khiển hướng bắt đầu hoặc chính của đường." + +msgid "Solid infill direction" +msgstr "Hướng infill đặc" + +msgid "" +"Angle for solid infill pattern, which controls the start or main direction " +"of line." +msgstr "Góc cho mẫu infill đặc, điều khiển hướng bắt đầu hoặc chính của đường." + +msgid "Sparse infill density" +msgstr "Mật độ infill thưa" + +#, no-c-format, no-boost-format +msgid "" +"Density of internal sparse infill, 100% turns all sparse infill into solid " +"infill and internal solid infill pattern will be used." +msgstr "" +"Mật độ của infill thưa bên trong, 100% biến tất cả infill thưa thành infill " +"đặc và mẫu infill đặc bên trong sẽ được sử dụng." + +msgid "Align infill direction to model" +msgstr "Căn chỉnh hướng infill với model" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"Căn chỉnh hướng infill và lấp bề mặt để theo định hướng của model trên bàn " +"in. Khi được bật, hướng lấp xoay theo model để duy trì đặc tính độ bền tối " +"ưu." + +msgid "Insert solid layers" +msgstr "Chèn lớp đặc" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"Chèn infill đặc tại các lớp cụ thể. Sử dụng N để chèn mỗi lớp thứ N, N#K để " +"chèn K lớp đặc liên tiếp mỗi N lớp (K là tùy chọn, ví dụ '5#' bằng '5#1'), " +"hoặc danh sách ngăn cách bằng dấu phẩy (ví dụ 1,7,9) để chèn tại các lớp rõ " +"ràng. Lớp được đánh số từ 1." + +msgid "Fill Multiline" +msgstr "Lấp nhiều đường" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "Sử dụng nhiều đường cho mẫu infill, nếu được hỗ trợ bởi mẫu infill." + +msgid "Sparse infill pattern" +msgstr "Mẫu infill thưa" + +msgid "Line pattern for internal sparse infill." +msgstr "Mẫu đường cho infill thưa bên trong." + +msgid "Zig Zag" +msgstr "Zig Zag" + +msgid "Cross Zag" +msgstr "Cross Zag" + +msgid "Locked Zag" +msgstr "Locked Zag" + +msgid "Line" +msgstr "Đường" + +msgid "Grid" +msgstr "Lưới" + +msgid "Tri-hexagon" +msgstr "Lục giác ba" + +msgid "Cubic" +msgstr "Khối lập phương" + +msgid "Adaptive Cubic" +msgstr "Khối lập phương thích ứng" + +msgid "Quarter Cubic" +msgstr "Tứ khối" + +msgid "Support Cubic" +msgstr "Support khối" + +msgid "Lightning" +msgstr "Tia chớp" + +msgid "Honeycomb" +msgstr "Tổ ong" + +msgid "3D Honeycomb" +msgstr "Tổ ong 3D" + +msgid "Lateral Honeycomb" +msgstr "Tổ ong bên" + +msgid "Lateral Lattice" +msgstr "Lattice bên" + +msgid "Cross Hatch" +msgstr "Vạch chéo" + +msgid "TPMS-D" +msgstr "TPMS-D" + +msgid "TPMS-FK" +msgstr "TPMS-FK" + +msgid "Gyroid" +msgstr "Gyroid" + +msgid "Lateral lattice angle 1" +msgstr "Góc lattice bên 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Góc của bộ phần tử lattice bên đầu tiên theo hướng Z. Không là dọc." + +msgid "Lateral lattice angle 2" +msgstr "Góc lattice bên 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Góc của bộ phần tử lattice bên thứ hai theo hướng Z. Không là dọc." + +msgid "Infill overhang angle" +msgstr "Góc nhô infill" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "Góc của các đường infill góc. 60° sẽ tạo ra tổ ong thuần túy." + +msgid "Sparse infill anchor length" +msgstr "Độ dài neo infill thưa" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Snapmaker Orca tries to connect two " +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than infill_anchor_max is found, the infill line is " +"connected to a perimeter segment at just one side and the length of the " +"perimeter segment taken is limited to this parameter, but no longer than " +"anchor_length_max.\n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" +"Kết nối đường infill với chu vi bên trong bằng một đoạn ngắn của chu vi bổ " +"sung. Nếu được biểu thị dưới dạng phần trăm (ví dụ: 15%) nó được tính trên " +"độ rộng đùn infill. Snapmaker Orca cố gắng kết nối hai đường infill gần với một " +"đoạn chu vi ngắn. Nếu không tìm thấy đoạn chu vi ngắn hơn " +"infill_anchor_max, đường infill được kết nối với đoạn chu vi chỉ ở một phía " +"và độ dài của đoạn chu vi được lấy bị giới hạn ở tham số này, nhưng không " +"dài hơn anchor_length_max.\n" +"Đặt tham số này thành không để tắt neo chu vi được kết nối với một đường " +"infill đơn." + +msgid "0 (no open anchors)" +msgstr "0 (không có neo mở)" + +msgid "1000 (unlimited)" +msgstr "1000 (không giới hạn)" + +msgid "Maximum length of the infill anchor" +msgstr "Độ dài tối đa của neo infill" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Snapmaker Orca tries to connect two " +"close infill lines to a short perimeter segment. If no such perimeter " +"segment shorter than this parameter is found, the infill line is connected " +"to a perimeter segment at just one side and the length of the perimeter " +"segment taken is limited to infill_anchor, but no longer than this " +"parameter.\n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" +"Kết nối đường infill với chu vi bên trong bằng một đoạn ngắn của chu vi bổ " +"sung. Nếu được biểu thị dưới dạng phần trăm (ví dụ: 15%) nó được tính trên " +"độ rộng đùn infill. Snapmaker Orca cố gắng kết nối hai đường infill gần với một " +"đoạn chu vi ngắn. Nếu không tìm thấy đoạn chu vi ngắn hơn tham số này, " +"đường infill được kết nối với đoạn chu vi chỉ ở một phía và độ dài của đoạn " +"chu vi được lấy bị giới hạn ở infill_anchor, nhưng không dài hơn tham số " +"này.\n" +"Nếu đặt thành 0, thuật toán cũ cho kết nối infill sẽ được sử dụng, nó nên " +"tạo ra kết quả giống như với 1000 & 0." + +msgid "0 (Simple connect)" +msgstr "0 (Kết nối đơn giản)" + +msgid "Acceleration of outer walls." +msgstr "Gia tốc của thành ngoài." + +msgid "Acceleration of inner walls." +msgstr "Gia tốc của thành trong." + +msgid "Acceleration of travel moves." +msgstr "Gia tốc của di chuyển." + +msgid "" +"Acceleration of top surface infill. Using a lower value may improve top " +"surface quality." +msgstr "" +"Gia tốc của infill bề mặt trên. Sử dụng giá trị thấp hơn có thể cải thiện " +"chất lượng bề mặt trên." + +msgid "Acceleration of outer wall. Using a lower value can improve quality." +msgstr "" +"Gia tốc của thành ngoài. Sử dụng giá trị thấp hơn có thể cải thiện chất " +"lượng." + +msgid "" +"Acceleration of bridges. If the value is expressed as a percentage (e.g. " +"50%), it will be calculated based on the outer wall acceleration." +msgstr "" +"Gia tốc của cầu. Nếu giá trị được biểu thị dưới dạng phần trăm (ví dụ 50%), " +"nó sẽ được tính dựa trên gia tốc thành ngoài." + +msgid "mm/s² or %" +msgstr "mm/s² hoặc %" + +msgid "" +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." +msgstr "" +"Gia tốc của infill thưa. Nếu giá trị được biểu thị dưới dạng phần trăm (ví " +"dụ 100%), nó sẽ được tính dựa trên gia tốc mặc định." + +msgid "" +"Acceleration of internal solid infill. If the value is expressed as a " +"percentage (e.g. 100%), it will be calculated based on the default " +"acceleration." +msgstr "" +"Gia tốc của infill đặc bên trong. Nếu giá trị được biểu thị dưới dạng phần " +"trăm (ví dụ 100%), nó sẽ được tính dựa trên gia tốc mặc định." + +msgid "" +"Acceleration of initial layer. Using a lower value can improve build plate " +"adhesion." +msgstr "" +"Gia tốc của lớp đầu tiên. Sử dụng giá trị thấp hơn có thể cải thiện độ bám " +"dính bàn in." + +msgid "Enable accel_to_decel" +msgstr "Bật accel_to_decel" + +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "max_accel_to_decel của Klipper sẽ được điều chỉnh tự động." + +msgid "accel_to_decel" +msgstr "accel_to_decel" + +#, c-format, boost-format +msgid "" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." +msgstr "" +"max_accel_to_decel của Klipper sẽ được điều chỉnh thành %% này của gia tốc." + +msgid "Default jerk." +msgstr "Giật mặc định." + +msgid "Junction Deviation" +msgstr "Junction Deviation" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" +"Độ lệch nút giao firmware Marlin (thay thế cài đặt giật XY truyền thống)." + +msgid "Jerk of outer walls." +msgstr "Giật của thành ngoài." + +msgid "Jerk of inner walls." +msgstr "Giật của thành trong." + +msgid "Jerk for top surface." +msgstr "Giật cho bề mặt trên." + +msgid "Jerk for infill." +msgstr "Giật cho infill." + +msgid "Jerk for initial layer." +msgstr "Giật cho lớp đầu tiên." + +msgid "Jerk for travel." +msgstr "Giật cho di chuyển." + +msgid "" +"Line width of initial layer. If expressed as a %, it will be computed over " +"the nozzle diameter." +msgstr "" +"Độ rộng đường của lớp đầu tiên. Nếu được biểu thị dưới dạng %, nó sẽ được " +"tính trên đường kính đầu phun." + +msgid "Initial layer height" +msgstr "Chiều cao lớp đầu tiên" + +msgid "" +"Height of initial layer. Making initial layer height to be thick slightly " +"can improve build plate adhesion." +msgstr "" +"Chiều cao của lớp đầu tiên. Làm cho chiều cao lớp đầu tiên dày một chút có " +"thể cải thiện độ bám dính bàn in." + +msgid "Speed of initial layer except the solid infill part." +msgstr "Tốc độ của lớp đầu tiên ngoại trừ phần infill đặc." + +msgid "Initial layer infill" +msgstr "Infill lớp đầu tiên" + +msgid "Speed of solid infill part of initial layer." +msgstr "Tốc độ của phần infill đặc của lớp đầu tiên." + +msgid "Initial layer travel speed" +msgstr "Tốc độ di chuyển lớp đầu tiên" + +msgid "Travel speed of initial layer." +msgstr "Tốc độ di chuyển của lớp đầu tiên." + +msgid "Number of slow layers" +msgstr "Số lượng lớp chậm" + +msgid "" +"The first few layers are printed slower than normal. The speed is gradually " +"increased in a linear fashion over the specified number of layers." +msgstr "" +"Vài lớp đầu tiên được in chậm hơn bình thường. Tốc độ được tăng dần theo " +"cách tuyến tính qua số lượng lớp được chỉ định." + +msgid "Initial layer nozzle temperature" +msgstr "Nhiệt độ đầu phun lớp đầu tiên" + +msgid "Nozzle temperature for printing initial layer when using this filament." +msgstr "Nhiệt độ đầu phun để in lớp đầu tiên khi sử dụng filament này." + +msgid "Full fan speed at layer" +msgstr "Tốc độ quạt đầy tại lớp" + +msgid "" +"Fan speed will be ramped up linearly from zero at layer " +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +msgstr "" +"Tốc độ quạt sẽ được tăng tuyến tính từ không tại lớp " +"\"close_fan_the_first_x_layers\" đến tối đa tại lớp \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" sẽ bị bỏ qua nếu thấp hơn " +"\"close_fan_the_first_x_layers\", trong trường hợp đó quạt sẽ chạy ở tốc độ " +"tối đa được phép tại lớp \"close_fan_the_first_x_layers\" + 1." + +msgid "layer" +msgstr "lớp" + +msgid "Support interface fan speed" +msgstr "Tốc độ quạt giao diện support" + +msgid "" +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"Tốc độ quạt làm mát phần này được áp dụng khi in giao diện support. Đặt tham " +"số này cao hơn tốc độ thông thường làm giảm độ bền liên kết lớp giữa support " +"và phần được hỗ trợ, làm cho chúng dễ tách hơn.\n" +"Đặt thành -1 để tắt.\n" +"Cài đặt này bị ghi đè bởi disable_fan_first_layers." + +msgid "Internal bridges fan speed" +msgstr "Tốc độ quạt cầu bên trong" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"Tốc độ quạt làm mát phần được sử dụng cho tất cả cầu bên trong. Đặt thành -1 " +"để sử dụng cài đặt tốc độ quạt phần nhô thay thế.\n" +"\n" +"Giảm tốc độ quạt cầu bên trong, so với tốc độ quạt thông thường của bạn, có " +"thể giúp giảm cong vênh phần do làm mát quá mức được áp dụng trên bề mặt lớn " +"trong thời gian dài." + +msgid "Ironing fan speed" +msgstr "Tốc độ quạt ủi" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" +"Tốc độ quạt làm mát phần này được áp dụng khi ủi. Đặt tham số này thấp hơn " +"tốc độ thông thường làm giảm khả năng tắc đầu phun do tốc độ lưu lượng thể " +"tích thấp, làm cho giao diện mịn hơn.\n" +"Đặt thành -1 để tắt." + +msgid "" +"Randomly jitter while printing the wall, so that the surface has a rough " +"look. This setting controls the fuzzy position." +msgstr "" +"Rung ngẫu nhiên trong khi in thành, để bề mặt có vẻ thô. Cài đặt này điều " +"khiển vị trí fuzzy." + +msgid "Contour" +msgstr "Đường viền" + +msgid "Contour and hole" +msgstr "Đường viền và lỗ" + +msgid "All walls" +msgstr "Tất cả thành" + +msgid "Fuzzy skin thickness" +msgstr "Độ dày fuzzy skin" + +msgid "" +"The width within which to jitter. It's advised to be below outer wall line " +"width." +msgstr "Độ rộng để rung. Khuyến nghị dưới độ rộng đường thành ngoài." + +msgid "Fuzzy skin point distance" +msgstr "Khoảng cách điểm fuzzy skin" + +msgid "" +"The average distance between the random points introduced on each line " +"segment." +msgstr "" +"Khoảng cách trung bình giữa các điểm ngẫu nhiên được giới thiệu trên mỗi " +"đoạn đường." + +msgid "Apply fuzzy skin to first layer" +msgstr "Áp dụng fuzzy skin cho lớp đầu tiên" + +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "Có áp dụng fuzzy skin trên lớp đầu tiên hay không." + +msgid "Fuzzy skin generator mode" +msgstr "Chế độ tạo fuzzy skin" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." +msgstr "" +"Chế độ tạo fuzzy skin. Chỉ hoạt động với Arachne!\n" +"Dịch chuyển: Chế độ cổ điển khi mẫu được hình thành bằng cách dịch đầu phun " +"sang bên từ đường dẫn ban đầu.\n" +"Đùn: Chế độ khi mẫu được hình thành bởi lượng nhựa được đùn. Đây là thuật " +"toán nhanh và thẳng không có rung đầu phun không cần thiết tạo ra mẫu mịn. " +"Nhưng nó hữu ích hơn để tạo thành lỏng lẻo trong toàn bộ mảng của chúng.\n" +"Kết hợp: Chế độ kết hợp [Dịch chuyển] + [Đùn]. Hình thức của thành tương tự " +"như chế độ [Dịch chuyển], nhưng nó không để lại lỗ chân lông giữa các chu " +"vi.\n" +"\n" +"Chú ý! Chế độ [Đùn] và [Kết hợp] chỉ hoạt động khi tham số " +"fuzzy_skin_thickness không lớn hơn độ dày của vòng in. Đồng thời, độ rộng " +"của đùn cho một lớp cụ thể cũng không được dưới một mức nhất định. Nó thường " +"bằng 15-25%% của chiều cao lớp. Do đó, độ dày fuzzy skin tối đa với độ rộng " +"chu vi 0.4 mm và chiều cao lớp 0.2 mm sẽ là 0.4-(0.2*0.25)=±0.35mm! Nếu bạn " +"nhập tham số cao hơn giá trị này, lỗi Flow::spacing() sẽ được hiển thị và " +"model sẽ không được slice. Bạn có thể chọn số này cho đến khi lỗi này được " +"lặp lại." + +msgid "Displacement" +msgstr "Dịch chuyển" + +msgid "Extrusion" +msgstr "Đùn" + +msgid "Combined" +msgstr "Kết hợp" + +msgid "Fuzzy skin noise type" +msgstr "Loại nhiễu fuzzy skin" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"Loại nhiễu để sử dụng cho tạo fuzzy skin:\n" +"Cổ điển: Nhiễu ngẫu nhiên đồng đều cổ điển.\n" +"Perlin: Nhiễu Perlin, tạo ra kết cấu nhất quán hơn.\n" +"Billow: Tương tự như nhiễu perlin, nhưng vón cục hơn.\n" +"Ridged Multifractal: Nhiễu có gờ với các đặc điểm sắc nét, răng cưa. Tạo kết " +"cấu giống đá cẩm thạch.\n" +"Voronoi: Chia bề mặt thành các ô voronoi, và dịch chuyển từng cái một lượng " +"ngẫu nhiên. Tạo kết cấu như vá lẽ." + +msgid "Classic" +msgstr "Cổ điển" + +msgid "Perlin" +msgstr "Perlin" + +msgid "Billow" +msgstr "Billow" + +msgid "Ridged Multifractal" +msgstr "Ridged Multifractal" + +msgid "Voronoi" +msgstr "Voronoi" + +msgid "Fuzzy skin feature size" +msgstr "Kích thước đặc điểm fuzzy skin" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"Kích thước cơ bản của các đặc điểm nhiễu mạch lạc, tính bằng mm. Giá trị cao " +"hơn sẽ tạo ra các đặc điểm lớn hơn." + +msgid "Fuzzy Skin Noise Octaves" +msgstr "Octave nhiễu fuzzy skin" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"Số lượng octave của nhiễu mạch lạc để sử dụng. Giá trị cao hơn tăng chi tiết " +"của nhiễu, nhưng cũng tăng thời gian tính toán." + +msgid "Fuzzy skin noise persistence" +msgstr "Độ bền nhiễu fuzzy skin" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "" +"Tốc độ suy giảm cho octave cao hơn của nhiễu mạch lạc. Giá trị thấp hơn sẽ " +"tạo ra nhiễu mịn hơn." + +msgid "Filter out tiny gaps" +msgstr "Lọc bỏ khe nhỏ" + +msgid "Layers and Perimeters" +msgstr "Lớp và chu vi" + +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"Không in lấp khe có độ dài nhỏ hơn ngưỡng được chỉ định (tính bằng mm). Cài " +"đặt này áp dụng cho infill đặc trên, dưới và, nếu sử dụng trình tạo chu vi " +"cổ điển, cho lấp khe thành." + +msgid "" +"Speed of gap infill. Gap usually has irregular line width and should be " +"printed more slowly." +msgstr "" +"Tốc độ của infill khe. Khe thường có độ rộng đường không đều và nên được in " +"chậm hơn." + +msgid "Precise Z height" +msgstr "Chiều cao Z chính xác" + +msgid "" +"Enable this to get precise Z height of object after slicing. It will get the " +"precise object height by fine-tuning the layer heights of the last few " +"layers. Note that this is an experimental parameter." +msgstr "" +"Bật điều này để có chiều cao z chính xác của đối tượng sau khi slice. Nó sẽ " +"có chiều cao đối tượng chính xác bằng cách tinh chỉnh chiều cao lớp của vài " +"lớp cuối cùng. Lưu ý rằng đây là tham số thử nghiệm." + +msgid "Arc fitting" +msgstr "Khớp cung" + +msgid "" +"Enable this to get a G-code file which has G2 and G3 moves. The fitting " +"tolerance is same as the resolution.\n" +"\n" +"Note: For Klipper machines, this option is recommended to be disabled. " +"Klipper does not benefit from arc commands as these are split again into " +"line segments by the firmware. This results in a reduction in surface " +"quality as line segments are converted to arcs by the slicer and then back " +"to line segments by the firmware." +msgstr "" +"Bật điều này để có file G-code có chuyển động G2 và G3. Dung sai khớp giống " +"như độ phân giải.\n" +"\n" +"Lưu ý: Đối với máy Klipper, tùy chọn này được khuyến nghị tắt. Klipper không " +"được lợi từ lệnh cung vì chúng được chia lại thành các đoạn đường bởi " +"firmware. Điều này dẫn đến giảm chất lượng bề mặt vì các đoạn đường được " +"chuyển đổi thành cung bởi slicer và sau đó quay lại thành các đoạn đường bởi " +"firmware." + +msgid "Add line number" +msgstr "Thêm số dòng" + +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." +msgstr "Bật điều này để thêm số dòng(Nx) vào đầu mỗi dòng G-code." + +msgid "Scan first layer" +msgstr "Quét lớp đầu tiên" + +msgid "" +"Enable this to enable the camera on printer to check the quality of first " +"layer." +msgstr "" +"Bật điều này để bật camera trên máy in để kiểm tra chất lượng lớp đầu tiên." + +msgid "Nozzle type" +msgstr "Loại đầu phun" + +msgid "" +"The metallic material of nozzle. This determines the abrasive resistance of " +"nozzle, and what kind of filament can be printed." +msgstr "" +"Vật liệu kim loại của đầu phun. Điều này xác định khả năng chống mài mòn của " +"đầu phun, và loại filament nào có thể được in." + +msgid "Undefine" +msgstr "Không xác định" + +msgid "Hardened steel" +msgstr "Thép cứng" + +msgid "Stainless steel" +msgstr "Thép không gỉ" + +msgid "Tungsten carbide" +msgstr "" + +msgid "Brass" +msgstr "Đồng thau" + +msgid "Nozzle HRC" +msgstr "HRC đầu phun" + +msgid "" +"The nozzle's hardness. Zero means no checking for nozzle's hardness during " +"slicing." +msgstr "" +"Độ cứng của đầu phun. Không có nghĩa là không kiểm tra độ cứng của đầu phun " +"trong quá trình slice." + +msgid "HRC" +msgstr "HRC" + +msgid "Printer structure" +msgstr "Cấu trúc máy in" + +msgid "The physical arrangement and components of a printing device." +msgstr "Sắp xếp vật lý và các thành phần của thiết bị in." + +msgid "CoreXY" +msgstr "CoreXY" + +msgid "I3" +msgstr "I3" + +msgid "Hbot" +msgstr "Hbot" + +msgid "Delta" +msgstr "Delta" + +msgid "Best object position" +msgstr "Vị trí đối tượng tốt nhất" + +msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." +msgstr "" +"Vị trí sắp xếp tự động tốt nhất trong phạm vi [0,1] theo hình dạng bàn in." + +msgid "" +"Enable this option if machine has auxiliary part cooling fan. G-code " +"command: M106 P2 S(0-255)." +msgstr "" +"Bật tùy chọn này nếu máy có quạt làm mát phần phụ. Lệnh G-code : M106 P2 " +"S(0-255)." + +msgid "" +"Start the fan this number of seconds earlier than its target start time (you " +"can use fractional seconds). It assumes infinite acceleration for this time " +"estimation, and will only take into account G1 and G0 moves (arc fitting is " +"unsupported).\n" +"It won't move fan commands from custom G-code (they act as a sort of " +"'barrier').\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" +"Use 0 to deactivate." +msgstr "" +"Khởi động quạt số giây này sớm hơn thời gian bắt đầu mục tiêu của nó (bạn có " +"thể sử dụng giây phân số). Nó giả định gia tốc vô hạn cho ước tính thời gian " +"này, và chỉ tính đến chuyển động G1 và G0 (khớp cung không được hỗ trợ).\n" +"Nó sẽ không di chuyển lệnh quạt từ G-code tùy chỉnh (chúng hoạt động như một " +"loại 'rào cản').\n" +"Nó sẽ không di chuyển lệnh quạt vào G-code bắt đầu nếu 'chỉ G-code bắt đầu " +"tùy chỉnh' được kích hoạt.\n" +"Sử dụng 0 để vô hiệu hóa." + +msgid "Only overhangs" +msgstr "Chỉ phần nhô" + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "Sẽ chỉ tính đến độ trễ cho việc làm mát phần nhô." + +msgid "Fan kick-start time" +msgstr "Thời gian khởi động quạt" + +msgid "" +"Emit a max fan speed command for this amount of seconds before reducing to " +"target speed to kick-start the cooling fan.\n" +"This is useful for fans where a low PWM/power may be insufficient to get the " +"fan started spinning from a stop, or to get the fan up to speed faster.\n" +"Set to 0 to deactivate." +msgstr "" +"Phát lệnh tốc độ quạt tối đa trong số giây này trước khi giảm xuống tốc độ " +"mục tiêu để khởi động quạt làm mát.\n" +"Điều này hữu ích cho các quạt mà PWM/công suất thấp có thể không đủ để làm " +"cho quạt bắt đầu quay từ trạng thái dừng, hoặc để làm cho quạt đạt tốc độ " +"nhanh hơn.\n" +"Đặt thành 0 để vô hiệu hóa." + +msgid "Time cost" +msgstr "Chi phí thời gian" + +msgid "The printer cost per hour." +msgstr "Chi phí máy in mỗi giờ." + +msgid "money/h" +msgstr "tiền/giờ" + +msgid "Support control chamber temperature" +msgstr "Hỗ trợ điều khiển nhiệt độ buồng" + +msgid "" +"This option is enabled if machine support controlling chamber temperature\n" +"G-code command: M141 S(0-255)" +msgstr "" +"Tùy chọn này được bật nếu máy hỗ trợ điều khiển nhiệt độ buồng\n" +"Lệnh G-code: M141 S(0-255)" + +msgid "Support air filtration" +msgstr "Hỗ trợ lọc không khí" + +msgid "" +"Enable this if printer support air filtration\n" +"G-code command: M106 P3 S(0-255)" +msgstr "" +"Bật điều này nếu máy in hỗ trợ lọc không khí\n" +"Lệnh G-code: M106 P3 S(0-255)" + +msgid "G-code flavor" +msgstr "Kiểu G-code" + +msgid "What kind of G-code the printer is compatible with." +msgstr "Loại G-code mà máy in tương thích." + +msgid "Klipper" +msgstr "Klipper" + +msgid "Pellet Modded Printer" +msgstr "Máy in Pellet đã chỉnh sửa" + +msgid "Enable this option if your printer uses pellets instead of filaments." +msgstr "Bật tùy chọn này nếu máy in của bạn sử dụng viên thay vì filament." + +msgid "Support multi bed types" +msgstr "Hỗ trợ nhiều loại bàn in" + +msgid "Enable this option if you want to use multiple bed types." +msgstr "Bật tùy chọn này nếu bạn muốn sử dụng nhiều loại bàn in." + +msgid "Label objects" +msgstr "Gắn nhãn đối tượng" + +msgid "" +"Enable this to add comments into the G-code labeling print moves with what " +"object they belong to, which is useful for the Octoprint CancelObject " +"plugin. This settings is NOT compatible with Single Extruder Multi Material " +"setup and Wipe into Object / Wipe into Infill." +msgstr "" +"Bật điều này để thêm chú thích vào G-code gắn nhãn chuyển động in với đối " +"tượng nào chúng thuộc về, hữu ích cho plugin CancelObject Octoprint. Cài đặt " +"này KHÔNG tương thích với thiết lập Đa vật liệu extruder đơn và Lau vào đối " +"tượng / Lau vào Infill." + +msgid "Exclude objects" +msgstr "Loại trừ đối tượng" + +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "Bật tùy chọn này để thêm lệnh EXCLUDE OBJECT vào G-code." + +msgid "Verbose G-code" +msgstr "G-code chi tiết" + +msgid "" +"Enable this to get a commented G-code file, with each line explained by a " +"descriptive text. If you print from SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Bật điều này để có file G-code có chú thích, với mỗi dòng được giải thích " +"bằng văn bản mô tả. Nếu bạn in từ thẻ SD, trọng lượng bổ sung của file có " +"thể làm cho firmware của bạn chậm lại." + +msgid "Infill combination" +msgstr "Kết hợp infill" + +msgid "" +"Automatically Combine sparse infill of several layers to print together to " +"reduce time. Wall is still printed with original layer height." +msgstr "" +"Tự động kết hợp infill thưa của nhiều lớp để in cùng nhau để giảm thời gian. " +"Thành vẫn được in với chiều cao lớp ban đầu." + +msgid "Infill shift step" +msgstr "Bước dịch infill" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" +"Tham số này thêm một sự dịch chuyển nhỏ vào mỗi lớp infill để tạo kết cấu " +"chéo." + +msgid "Sparse infill rotation template" +msgstr "Mẫu xoay infill thưa" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" +"Xoay hướng infill thưa mỗi lớp bằng cách sử dụng mẫu góc. Nhập độ ngăn cách " +"bằng dấu phẩy (ví dụ: '0,30,60,90'). Góc được áp dụng theo thứ tự theo lớp " +"và lặp lại khi danh sách kết thúc. Cú pháp nâng cao được hỗ trợ: '+5' xoay " +"+5° mỗi lớp; '+5#5' xoay +5° mỗi 5 lớp. Xem Wiki để biết chi tiết. Khi mẫu " +"được đặt, cài đặt hướng infill tiêu chuẩn bị bỏ qua. Lưu ý: một số mẫu " +"infill (ví dụ: Gyroid) tự điều khiển xoay; sử dụng cẩn thận." + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "Mẫu xoay infill đặc" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" +"Tham số này thêm xoay hướng infill đặc vào mỗi lớp theo mẫu được chỉ định. " +"Mẫu là danh sách ngăn cách bằng dấu phẩy của các góc tính bằng độ, ví dụ " +"'0,90'. Góc đầu tiên được áp dụng cho lớp đầu tiên, góc thứ hai cho lớp thứ " +"hai, v.v. Nếu có nhiều lớp hơn góc, các góc sẽ được lặp lại. Lưu ý rằng " +"không phải tất cả mẫu infill đặc đều hỗ trợ xoay." + +msgid "Skeleton infill density" +msgstr "Mật độ infill khung" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" +"Phần còn lại của đường viền model sau khi loại bỏ một độ sâu nhất định khỏi " +"bề mặt được gọi là khung. Tham số này được sử dụng để điều chỉnh mật độ của " +"phần này. Khi hai vùng có cùng cài đặt infill thưa nhưng mật độ khung khác " +"nhau, vùng khung của chúng sẽ phát triển các phần chồng lấp. Mặc định giống " +"như mật độ infill." + +msgid "Skin infill density" +msgstr "Mật độ infill da" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" +"Phần bề mặt ngoài của model trong phạm vi độ sâu nhất định được gọi là da. " +"Tham số này được sử dụng để điều chỉnh mật độ của phần này. Khi hai vùng có " +"cùng cài đặt infill thưa nhưng mật độ da khác nhau, vùng này sẽ không được " +"chia thành hai vùng riêng biệt. Mặc định giống như mật độ infill." + +msgid "Skin infill depth" +msgstr "Độ sâu infill da" + +msgid "The parameter sets the depth of skin." +msgstr "Tham số đặt độ sâu của da." + +msgid "Infill lock depth" +msgstr "Độ sâu khóa infill" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "Tham số đặt độ sâu chồng lấp giữa bên trong và da." + +msgid "Skin line width" +msgstr "Độ rộng đường da" + +msgid "Adjust the line width of the selected skin paths." +msgstr "Điều chỉnh độ rộng đường của các đường da đã chọn." + +msgid "Skeleton line width" +msgstr "Độ rộng đường khung" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "Điều chỉnh độ rộng đường của các đường khung đã chọn." + +msgid "Symmetric infill Y axis" +msgstr "Infill đối xứng trục Y" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" +"Nếu model có hai phần đối xứng về trục Y, và bạn muốn các phần này có kết " +"cấu đối xứng, vui lòng nhấp tùy chọn này trên một trong các phần." + +msgid "Infill combination - Max layer height" +msgstr "Kết hợp infill - Chiều cao lớp tối đa" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"Chiều cao lớp tối đa cho infill thưa kết hợp.\n" +"\n" +"Đặt nó thành 0 hoặc 100% để sử dụng đường kính đầu phun (để giảm tối đa thời " +"gian in) hoặc giá trị ~80% để tối đa hóa độ bền infill thưa.\n" +"\n" +"Số lượng lớp mà infill được kết hợp được suy ra bằng cách chia giá trị này " +"với chiều cao lớp và làm tròn xuống số thập phân gần nhất.\n" +"\n" +"Sử dụng giá trị mm tuyệt đối (ví dụ 0.32mm cho đầu phun 0.4mm) hoặc giá trị " +"% (ví dụ 80%). Giá trị này không được lớn hơn đường kính đầu phun." + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + +msgid "Filament to print internal sparse infill." +msgstr "Filament để in infill thưa bên trong." + +msgid "" +"Line width of internal sparse infill. If expressed as a %, it will be " +"computed over the nozzle diameter." +msgstr "" +"Độ rộng đường của infill thưa bên trong. Nếu được biểu thị dưới dạng %, nó " +"sẽ được tính trên đường kính đầu phun." + +msgid "Infill/Wall overlap" +msgstr "Chồng lấp infill/Thành" + +#, no-c-format, no-boost-format +msgid "" +"Infill area is enlarged slightly to overlap with wall for better bonding. " +"The percentage value is relative to line width of sparse infill. Set this " +"value to ~10-15% to minimize potential over extrusion and accumulation of " +"material resulting in rough top surfaces." +msgstr "" +"Vùng infill được mở rộng một chút để chồng lấp với thành để liên kết tốt " +"hơn. Giá trị phần trăm tương đối với độ rộng đường của infill thưa. Đặt giá " +"trị này thành ~10-15% để giảm thiểu đùn dư tiềm ẩn và tích tụ vật liệu dẫn " +"đến bề mặt trên thô." + +msgid "Top/Bottom solid infill/wall overlap" +msgstr "Chồng lấp infill đặc/thành trên/dưới" + +#, no-c-format, no-boost-format +msgid "" +"Top solid infill area is enlarged slightly to overlap with wall for better " +"bonding and to minimize the appearance of pinholes where the top infill " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " +"appearance of pinholes. The percentage value is relative to line width of " +"sparse infill." +msgstr "" +"Vùng infill đặc trên được mở rộng một chút để chồng lấp với thành để liên " +"kết tốt hơn và giảm thiểu sự xuất hiện của lỗ kim nơi infill trên gặp thành. " +"Giá trị 25-30% là điểm khởi đầu tốt, giảm thiểu sự xuất hiện của lỗ kim. Giá " +"trị phần trăm tương đối với độ rộng đường của infill thưa." + +msgid "Speed of internal sparse infill." +msgstr "Tốc độ của infill thưa bên trong." + +msgid "Inherits profile" +msgstr "Kế thừa hồ sơ" + +msgid "Name of parent profile." +msgstr "Tên của hồ sơ cha." + +msgid "Interface shells" +msgstr "Vỏ giao diện" + +msgid "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." +msgstr "" +"Ép buộc tạo vỏ đặc giữa các vật liệu/khối lượng liền kề. Hữu ích cho bản in " +"đa extruder với vật liệu trong mờ hoặc vật liệu support hòa tan thủ công." + +msgid "Maximum width of a segmented region" +msgstr "Độ rộng tối đa của vùng phân đoạn" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "Độ rộng tối đa của vùng phân đoạn. Không vô hiệu hóa tính năng này." + +msgid "Interlocking depth of a segmented region" +msgstr "Độ sâu lồng ghép của vùng phân đoạn" + +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." +msgstr "" +"Độ sâu lồng ghép của vùng phân đoạn. Nó sẽ bị bỏ qua nếu " +"\"mmu_segmented_region_max_width\" là không hoặc nếu " +"\"mmu_segmented_region_interlocking_depth\" lớn hơn " +"\"mmu_segmented_region_max_width\". Không vô hiệu hóa tính năng này." + +msgid "Use beam interlocking" +msgstr "Sử dụng lồng ghép dầm" + +msgid "" +"Generate interlocking beam structure at the locations where different " +"filaments touch. This improves the adhesion between filaments, especially " +"models printed in different materials." +msgstr "" +"Tạo cấu trúc dầm lồng ghép tại các vị trí mà các filament khác nhau chạm " +"vào. Điều này cải thiện độ bám dính giữa các filament, đặc biệt các model " +"được in bằng vật liệu khác nhau." + +msgid "Interlocking beam width" +msgstr "Độ rộng dầm lồng ghép" + +msgid "The width of the interlocking structure beams." +msgstr "Độ rộng của các dầm cấu trúc lồng ghép." + +msgid "Interlocking direction" +msgstr "Hướng lồng ghép" + +msgid "Orientation of interlock beams." +msgstr "Định hướng của các dầm lồng ghép." + +msgid "Interlocking beam layers" +msgstr "Lớp dầm lồng ghép" + +msgid "" +"The height of the beams of the interlocking structure, measured in number of " +"layers. Less layers is stronger, but more prone to defects." +msgstr "" +"Chiều cao của các dầm của cấu trúc lồng ghép, đo bằng số lớp. Ít lớp hơn " +"mạnh hơn, nhưng dễ bị khuyết điểm hơn." + +msgid "Interlocking depth" +msgstr "Độ sâu lồng ghép" + +msgid "" +"The distance from the boundary between filaments to generate interlocking " +"structure, measured in cells. Too few cells will result in poor adhesion." +msgstr "" +"Khoảng cách từ ranh giới giữa các filament để tạo cấu trúc lồng ghép, đo " +"bằng ô. Quá ít ô sẽ dẫn đến độ bám dính kém." + +msgid "Interlocking boundary avoidance" +msgstr "Tránh ranh giới lồng ghép" + +msgid "" +"The distance from the outside of a model where interlocking structures will " +"not be generated, measured in cells." +msgstr "" +"Khoảng cách từ bên ngoài model nơi cấu trúc lồng ghép sẽ không được tạo, đo " +"bằng ô." + +msgid "Ironing Type" +msgstr "Loại ủi" + +msgid "" +"Ironing is using small flow to print on same height of surface again to make " +"flat surface more smooth. This setting controls which layer being ironed" +msgstr "" +"Ủi là sử dụng lưu lượng nhỏ để in lại trên cùng chiều cao của bề mặt để làm " +"cho bề mặt phẳng mịn hơn. Cài đặt này điều khiển lớp nào được ủi" + +msgid "No ironing" +msgstr "Không ủi" + +msgid "Top surfaces" +msgstr "Bề mặt trên" + +msgid "Topmost surface" +msgstr "Bề mặt trên cùng" + +msgid "All solid layer" +msgstr "Tất cả lớp đặc" + +msgid "Ironing Pattern" +msgstr "Mẫu ủi" + +msgid "The pattern that will be used when ironing." +msgstr "Mẫu sẽ được sử dụng khi ủi." + +msgid "Ironing flow" +msgstr "Lưu lượng ủi" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"layer height. Too high value results in overextrusion on the surface." +msgstr "" +"Lượng vật liệu để đùn trong khi ủi. Tương đối với lưu lượng của chiều cao " +"lớp bình thường. Giá trị quá cao dẫn đến đùn dư trên bề mặt." + +msgid "Ironing line spacing" +msgstr "Khoảng cách đường ủi" + +msgid "The distance between the lines of ironing." +msgstr "Khoảng cách giữa các đường ủi." + +msgid "Ironing inset" +msgstr "Lùi vào ủi" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "" +"Khoảng cách để giữ từ các cạnh. Giá trị 0 đặt điều này thành một nửa đường " +"kính đầu phun." + +msgid "Ironing speed" +msgstr "Tốc độ ủi" + +msgid "Print speed of ironing lines." +msgstr "Tốc độ in của các đường ủi." + +msgid "Ironing angle offset" +msgstr "" + +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "G-code này được chèn vào mỗi lần thay đổi lớp sau khi nâng Z." + +msgid "Clumping detection G-code" +msgstr "" + +msgid "Supports silent mode" +msgstr "Hỗ trợ chế độ im lặng" + +msgid "" +"Whether the machine supports silent mode in which machine use lower " +"acceleration to print." +msgstr "" +"Máy có hỗ trợ chế độ im lặng trong đó máy sử dụng gia tốc thấp hơn để in hay " +"không." + +msgid "Emit limits to G-code" +msgstr "Phát giới hạn ra G-code" + +msgid "Machine limits" +msgstr "Giới hạn máy" + +msgid "" +"If enabled, the machine limits will be emitted to G-code file.\n" +"This option will be ignored if the G-code flavor is set to Klipper." +msgstr "" +"Nếu được bật, giới hạn máy sẽ được phát ra file G-code.\n" +"Tùy chọn này sẽ bị bỏ qua nếu kiểu G-code được đặt thành Klipper." + +msgid "" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." +msgstr "" +"G-code này sẽ được sử dụng làm mã cho tạm dừng in. Người dùng có thể chèn G-" +"code tạm dừng trong trình xem G-code." + +msgid "This G-code will be used as a custom code." +msgstr "G-code này sẽ được sử dụng làm mã tùy chỉnh." + +msgid "Small area flow compensation (beta)" +msgstr "Bù lưu lượng vùng nhỏ (beta)" + +msgid "Enable flow compensation for small infill areas." +msgstr "Bật bù lưu lượng cho vùng infill nhỏ." + +msgid "Flow Compensation Model" +msgstr "Model bù lưu lượng" + +msgid "" +"Flow Compensation Model, used to adjust the flow for small infill areas. The " +"model is expressed as a comma separated pair of values for extrusion length " +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" +msgstr "" +"Model bù lưu lượng, được sử dụng để điều chỉnh lưu lượng cho vùng infill " +"nhỏ. Model được biểu thị dưới dạng cặp giá trị ngăn cách bằng dấu phẩy cho " +"độ dài đùn và hệ số hiệu chỉnh lưu lượng. Mỗi cặp trên một dòng riêng biệt, " +"theo sau bởi dấu chấm phẩy, theo định dạng sau: \"1.234, 5.678;\"" + +msgid "Maximum speed X" +msgstr "Tốc độ tối đa X" + +msgid "Maximum speed Y" +msgstr "Tốc độ tối đa Y" + +msgid "Maximum speed Z" +msgstr "Tốc độ tối đa Z" + +msgid "Maximum speed E" +msgstr "Tốc độ tối đa E" + +msgid "Maximum X speed" +msgstr "Tốc độ X tối đa" + +msgid "Maximum Y speed" +msgstr "Tốc độ Y tối đa" + +msgid "Maximum Z speed" +msgstr "Tốc độ Z tối đa" + +msgid "Maximum E speed" +msgstr "Tốc độ E tối đa" + +msgid "Maximum acceleration X" +msgstr "Gia tốc tối đa X" + +msgid "Maximum acceleration Y" +msgstr "Gia tốc tối đa Y" + +msgid "Maximum acceleration Z" +msgstr "Gia tốc tối đa Z" + +msgid "Maximum acceleration E" +msgstr "Gia tốc tối đa E" + +msgid "Maximum acceleration of the X axis" +msgstr "Gia tốc tối đa của trục X" + +msgid "Maximum acceleration of the Y axis" +msgstr "Gia tốc tối đa của trục Y" + +msgid "Maximum acceleration of the Z axis" +msgstr "Gia tốc tối đa của trục Z" + +msgid "Maximum acceleration of the E axis" +msgstr "Gia tốc tối đa của trục E" + +msgid "Maximum jerk X" +msgstr "Giật tối đa X" + +msgid "Maximum jerk Y" +msgstr "Giật tối đa Y" + +msgid "Maximum jerk Z" +msgstr "Giật tối đa Z" + +msgid "Maximum jerk E" +msgstr "Giật tối đa E" + +msgid "Maximum jerk of the X axis" +msgstr "Giật tối đa của trục X" + +msgid "Maximum jerk of the Y axis" +msgstr "Giật tối đa của trục Y" + +msgid "Maximum jerk of the Z axis" +msgstr "Giật tối đa của trục Z" + +msgid "Maximum jerk of the E axis" +msgstr "Giật tối đa của trục E" + +msgid "Maximum Junction Deviation" +msgstr "Độ lệch nút giao tối đa" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + +msgid "Minimum speed for extruding" +msgstr "Tốc độ tối thiểu để đùn" + +msgid "Minimum speed for extruding (M205 S)" +msgstr "Tốc độ tối thiểu để đùn (M205 S)" + +msgid "Minimum travel speed" +msgstr "Tốc độ di chuyển tối thiểu" + +msgid "Minimum travel speed (M205 T)" +msgstr "Tốc độ di chuyển tối thiểu (M205 T)" + +msgid "Maximum acceleration for extruding" +msgstr "Gia tốc tối đa để đùn" + +msgid "Maximum acceleration for extruding (M204 P)" +msgstr "Gia tốc tối đa để đùn (M204 P)" + +msgid "Maximum acceleration for retracting" +msgstr "Gia tốc tối đa để rút" + +msgid "Maximum acceleration for retracting (M204 R)" +msgstr "Gia tốc tối đa để rút (M204 R)" + +msgid "Maximum acceleration for travel" +msgstr "Gia tốc tối đa cho di chuyển" + +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." +msgstr "Gia tốc tối đa cho di chuyển (M204 T), nó chỉ áp dụng cho Marlin 2." + +msgid "Resonance avoidance" +msgstr "Tránh cộng hưởng" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" +"Bằng cách giảm tốc độ của thành ngoài để tránh vùng cộng hưởng của máy in, " +"hiện tượng rung trên bề mặt model được tránh.\n" +"Vui lòng tắt tùy chọn này khi kiểm tra hiện tượng rung." + +msgid "Min" +msgstr "Tối thiểu" + +msgid "Minimum speed of resonance avoidance." +msgstr "Tốc độ tối thiểu của tránh cộng hưởng." + +msgid "Max" +msgstr "Tối đa" + +msgid "Maximum speed of resonance avoidance." +msgstr "Tốc độ tối đa của tránh cộng hưởng." + +msgid "" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"Tốc độ quạt làm mát phần có thể được tăng lên khi tự động làm mát được bật. " +"Đây là tốc độ tối đa cho quạt làm mát phần." + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." +msgstr "" +"Chiều cao lớp có thể in cao nhất cho extruder. Được sử dụng để giới hạn " +"chiều cao lớp tối đa khi bật chiều cao lớp thích ứng." + +msgid "Extrusion rate smoothing" +msgstr "Làm mịn tốc độ đùn" + +msgid "" +"This parameter smooths out sudden extrusion rate changes that happen when " +"the printer transitions from printing a high flow (high speed/larger width) " +"extrusion to a lower flow (lower speed/smaller width) extrusion and vice " +"versa.\n" +"\n" +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " +"can change over time. Higher values mean higher extrusion rate changes are " +"allowed, resulting in faster speed transitions.\n" +"\n" +"A value of 0 disables the feature.\n" +"\n" +"For a high speed, high flow direct drive printer (like the Bambu lab or " +"Voron) this value is usually not needed. However it can provide some " +"marginal benefit in certain cases where feature speeds vary greatly. For " +"example, when there are aggressive slowdowns due to overhangs. In these " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " +"transition.\n" +"\n" +"For slower printers without pressure advance, the value should be set much " +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" +"\n" +"This feature is known as Pressure Equalizer in Prusa slicer.\n" +"\n" +"Note: this parameter disables arc fitting." +msgstr "" +"Tham số này làm mịn thay đổi tốc độ đùn đột ngột xảy ra khi máy in chuyển từ " +"in đùn lưu lượng cao (tốc độ cao/độ rộng lớn hơn) sang đùn lưu lượng thấp " +"hơn (tốc độ thấp hơn/độ rộng nhỏ hơn) và ngược lại.\n" +"\n" +"Nó xác định tốc độ tối đa mà lưu lượng thể tích đùn tính bằng mm³/s có thể " +"thay đổi theo thời gian. Giá trị cao hơn có nghĩa là thay đổi tốc độ đùn cao " +"hơn được cho phép, dẫn đến chuyển đổi tốc độ nhanh hơn.\n" +"\n" +"Giá trị 0 vô hiệu hóa tính năng.\n" +"\n" +"Đối với máy in direct drive tốc độ cao, lưu lượng cao (như Bambu lab hoặc " +"Voron) giá trị này thường không cần thiết. Tuy nhiên nó có thể cung cấp một " +"số lợi ích nhỏ trong một số trường hợp nhất định khi tốc độ tính năng thay " +"đổi nhiều. Ví dụ, khi có giảm tốc mạnh do phần nhô. Trong các trường hợp này " +"giá trị cao khoảng 300-350 mm³/s² được khuyến nghị vì điều này cho phép làm " +"mịn vừa đủ để hỗ trợ áp suất nâng cao đạt được chuyển đổi lưu lượng mịn " +"hơn.\n" +"\n" +"Đối với máy in chậm hơn không có áp suất nâng cao, giá trị nên được đặt thấp " +"hơn nhiều. Giá trị 10-15 mm³/s² là điểm khởi đầu tốt cho extruder direct " +"drive và 5-10 mm³/s² cho kiểu Bowden.\n" +"\n" +"Tính năng này được gọi là Pressure Equalizer trong slicer Prusa.\n" +"\n" +"Lưu ý: tham số này vô hiệu hóa khớp cung." + +msgid "Smoothing segment length" +msgstr "Độ dài đoạn làm mịn" + +msgid "" +"A lower value results in smoother extrusion rate transitions. However, this " +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" +"\n" +"Default value of 3 works well for most cases. If your printer is stuttering, " +"increase this value to reduce the number of adjustments made.\n" +"\n" +"Allowed values: 0.5-5" +msgstr "" +"Giá trị thấp hơn dẫn đến chuyển đổi tốc độ đùn mịn hơn. Tuy nhiên, điều này " +"dẫn đến file G-code lớn hơn đáng kể và nhiều lệnh hơn cho máy in xử lý.\n" +"\n" +"Giá trị mặc định 3 hoạt động tốt cho hầu hết các trường hợp. Nếu máy in của " +"bạn bị giật, hãy tăng giá trị này để giảm số lượng điều chỉnh được thực " +"hiện.\n" +"\n" +"Giá trị được phép: 0.5-5" + +msgid "Apply only on external features" +msgstr "Chỉ áp dụng cho tính năng bên ngoài" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"Áp dụng làm mịn tốc độ đùn chỉ trên chu vi bên ngoài và phần nhô. Điều này " +"có thể giúp giảm khuyết điểm do chuyển đổi tốc độ đột ngột trên phần nhô " +"nhìn thấy bên ngoài mà không ảnh hưởng đến tốc độ in của các tính năng sẽ " +"không nhìn thấy đối với người dùng." + +msgid "Minimum speed for part cooling fan." +msgstr "Tốc độ tối thiểu cho quạt làm mát phần." + +msgid "" +"Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " +"during printing except the first several layers which is defined by no " +"cooling layers.\n" +"Please enable auxiliary_fan in printer settings to use this feature. G-code " +"command: M106 P2 S(0-255)" +msgstr "" +"Tốc độ của quạt làm mát phần phụ. Quạt phụ sẽ chạy ở tốc độ này trong khi in " +"ngoại trừ vài lớp đầu tiên được xác định bởi các lớp không làm mát.\n" +"Vui lòng bật auxiliary_fan trong cài đặt máy in để sử dụng tính năng này. " +"Lệnh G-code : M106 P2 S(0-255)" + +msgid "" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." +msgstr "" +"Chiều cao lớp có thể in thấp nhất cho extruder. Được sử dụng để giới hạn " +"chiều cao lớp tối thiểu khi bật chiều cao lớp thích ứng." + +msgid "Min print speed" +msgstr "Tốc độ in tối thiểu" + +msgid "" +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." +msgstr "" +"Tốc độ in tối thiểu mà máy in giảm xuống để duy trì thời gian lớp tối thiểu " +"được xác định ở trên khi giảm tốc để làm mát lớp tốt hơn được bật." + +msgid "The diameter of nozzle." +msgstr "Đường kính của đầu phun." + +msgid "Configuration notes" +msgstr "Ghi chú cấu hình" + +msgid "" +"You can put here your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"Bạn có thể đặt ghi chú cá nhân ở đây. Văn bản này sẽ được thêm vào chú thích " +"tiêu đề G-code." + +msgid "Host Type" +msgstr "Loại máy chủ" + +msgid "" +"Snapmaker Orca can upload G-code files to a printer host. This field must " +"contain the kind of the host." +msgstr "" +"Snapmaker Orca có thể tải file G-code lên máy chủ máy in. Trường này phải chứa " +"loại máy chủ." + +msgid "Nozzle volume" +msgstr "Thể tích đầu phun" + +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "Thể tích đầu phun giữa dao cắt và cuối đầu phun." + +msgid "Cooling tube position" +msgstr "Vị trí ống làm mát" + +msgid "Distance of the center-point of the cooling tube from the extruder tip." +msgstr "Khoảng cách của điểm trung tâm của ống làm mát từ đầu extruder." + +msgid "Cooling tube length" +msgstr "Độ dài ống làm mát" + +msgid "Length of the cooling tube to limit space for cooling moves inside it." +msgstr "" +"Độ dài của ống làm mát để giới hạn không gian cho động tác làm mát bên trong " +"nó." + +msgid "High extruder current on filament swap" +msgstr "Dòng điện extruder cao khi đổi filament" + +msgid "" +"It may be beneficial to increase the extruder motor current during the " +"filament exchange sequence to allow for rapid ramming feed rates and to " +"overcome resistance when loading a filament with an ugly shaped tip." +msgstr "" +"Có thể có lợi khi tăng dòng điện động cơ extruder trong trình tự đổi " +"filament để cho phép tốc độ nạp ramming nhanh và vượt qua sức cản khi nạp " +"filament có đầu hình dạng xấu." + +msgid "Filament parking position" +msgstr "Vị trí đậu filament" + +msgid "" +"Distance of the extruder tip from the position where the filament is parked " +"when unloaded. This should match the value in printer firmware." +msgstr "" +"Khoảng cách của đầu extruder từ vị trí mà filament được đậu khi tháo. Điều " +"này nên khớp với giá trị trong firmware máy in." + +msgid "Extra loading distance" +msgstr "Khoảng cách nạp bổ sung" + +msgid "" +"When set to zero, the distance the filament is moved from parking position " +"during load is exactly the same as it was moved back during unload. When " +"positive, it is loaded further, if negative, the loading move is shorter " +"than unloading." +msgstr "" +"Khi đặt thành không, khoảng cách filament được di chuyển từ vị trí đậu trong " +"khi nạp chính xác giống như nó được di chuyển ngược lại trong khi tháo. Khi " +"dương, nó được nạp xa hơn, nếu âm, động tác nạp ngắn hơn tháo." + +msgid "Start end points" +msgstr "Điểm bắt đầu kết thúc" + +msgid "The start and end points which is from cutter area to garbage can." +msgstr "Các điểm bắt đầu và kết thúc từ vùng dao cắt đến thùng rác." + +msgid "Reduce infill retraction" +msgstr "Giảm rút infill" + +msgid "" +"Don't retract when the travel is in infill area absolutely. That means the " +"oozing can't been seen. This can reduce times of retraction for complex " +"model and save printing time, but make slicing and G-code generating slower." +msgstr "" +"Không rút khi di chuyển ở vùng infill hoàn toàn. Điều đó có nghĩa là chảy " +"nhựa không thể nhìn thấy. Điều này có thể giảm số lần rút cho model phức tạp " +"và tiết kiệm thời gian in, nhưng làm cho slice và tạo G-code chậm hơn." + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "" +"Tùy chọn này sẽ giảm nhiệt độ của các extruder không hoạt động để ngăn chảy " +"nhựa." + +msgid "Filename format" +msgstr "Định dạng tên file" + +msgid "Users can define the project file name when exporting." +msgstr "Người dùng có thể xác định tên file dự án khi xuất." + +msgid "Make overhangs printable" +msgstr "Làm cho phần nhô có thể in" + +msgid "Modify the geometry to print overhangs without support material." +msgstr "Sửa đổi hình học để in phần nhô mà không cần vật liệu support." + +msgid "Make overhangs printable - Maximum angle" +msgstr "Làm cho phần nhô có thể in - Góc tối đa" + +msgid "" +"Maximum angle of overhangs to allow after making more steep overhangs " +"printable.90° will not change the model at all and allow any overhang, while " +"0 will replace all overhangs with conical material." +msgstr "" +"Góc tối đa của phần nhô cho phép sau khi làm cho phần nhô dốc hơn có thể " +"in.90° sẽ không thay đổi model và cho phép bất kỳ phần nhô nào, trong khi 0 " +"sẽ thay thế tất cả phần nhô bằng vật liệu hình nón." + +msgid "Make overhangs printable - Hole area" +msgstr "Làm cho phần nhô có thể in - Vùng lỗ" + +msgid "" +"Maximum area of a hole in the base of the model before it's filled by " +"conical material. A value of 0 will fill all the holes in the model base." +msgstr "" +"Diện tích tối đa của lỗ ở đáy model trước khi nó được lấp bởi vật liệu hình " +"nón. Giá trị 0 sẽ lấp tất cả các lỗ ở đáy model." + +msgid "Detect overhang wall" +msgstr "Phát hiện thành nhô" + +#, c-format, boost-format +msgid "" +"Detect the overhang percentage relative to line width and use different " +"speed to print. For 100%% overhang, bridge speed is used." +msgstr "" +"Phát hiện phần trăm nhô tương đối với độ rộng đường và sử dụng tốc độ khác " +"nhau để in. Đối với phần nhô 100%%, tốc độ cầu được sử dụng." + +msgid "Filament to print walls." +msgstr "Filament để in thành." + +msgid "" +"Line width of inner wall. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" +"Độ rộng đường của thành trong. Nếu được biểu thị dưới dạng %, nó sẽ được " +"tính trên đường kính đầu phun." + +msgid "Speed of inner wall." +msgstr "Tốc độ của thành trong." + +msgid "Number of walls of every layer." +msgstr "Số lượng thành của mỗi lớp." + +msgid "Alternate extra wall" +msgstr "Thay thế thành bổ sung" + +msgid "" +"This setting adds an extra wall to every other layer. This way the infill " +"gets wedged vertically between the walls, resulting in stronger prints.\n" +"\n" +"When this option is enabled, the ensure vertical shell thickness option " +"needs to be disabled.\n" +"\n" +"Using lightning infill together with this option is not recommended as there " +"is limited infill to anchor the extra perimeters to." +msgstr "" +"Cài đặt này thêm một thành bổ sung vào mỗi lớp khác. Theo cách này infill " +"được nêm theo chiều dọc giữa các thành, dẫn đến bản in mạnh hơn.\n" +"\n" +"Khi tùy chọn này được bật, tùy chọn đảm bảo độ dày vỏ dọc cần được tắt.\n" +"\n" +"Sử dụng infill tia chớp cùng với tùy chọn này không được khuyến nghị vì có " +"infill hạn chế để neo các chu vi bổ sung vào." + +msgid "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Snapmaker Orca config settings by reading " +"environment variables." +msgstr "" +"Nếu bạn muốn xử lý G-code đầu ra thông qua script tùy chỉnh, chỉ cần liệt kê " +"đường dẫn tuyệt đối của chúng ở đây. Ngăn cách nhiều script bằng dấu chấm " +"phẩy. Script sẽ được truyền đường dẫn tuyệt đối đến file G-code làm tham số " +"đầu tiên, và chúng có thể truy cập cài đặt cấu hình Snapmaker Orca bằng cách " +"đọc biến môi trường." + +msgid "Printer type" +msgstr "Loại máy in" + +msgid "Type of the printer." +msgstr "Loại của máy in." + +msgid "Printer notes" +msgstr "Ghi chú máy in" + +msgid "You can put your notes regarding the printer here." +msgstr "Bạn có thể đặt ghi chú về máy in ở đây." + +msgid "Printer variant" +msgstr "Biến thể máy in" + +msgid "Raft contact Z distance" +msgstr "Khoảng cách Z tiếp xúc raft" + +msgid "Z gap between object and raft. Ignored for soluble interface." +msgstr "Khe Z giữa đối tượng và raft. Bị bỏ qua cho giao diện hòa tan." + +msgid "Raft expansion" +msgstr "Mở rộng raft" + +msgid "Expand all raft layers in XY plane." +msgstr "Mở rộng tất cả lớp raft trên mặt phẳng XY." + +msgid "Initial layer density" +msgstr "Mật độ lớp đầu tiên" + +msgid "Density of the first raft or support layer." +msgstr "Mật độ của lớp raft hoặc support đầu tiên." + +msgid "Initial layer expansion" +msgstr "Mở rộng lớp đầu tiên" + +msgid "Expand the first raft or support layer to improve bed plate adhesion." +msgstr "" +"Mở rộng lớp raft hoặc support đầu tiên để cải thiện độ bám dính bàn in." + +msgid "Raft layers" +msgstr "Lớp raft" + +msgid "" +"Object will be raised by this number of support layers. Use this function to " +"avoid warping when printing ABS." +msgstr "" +"Đối tượng sẽ được nâng lên bởi số lớp support này. Sử dụng chức năng này để " +"tránh cong vênh khi in ABS." + +msgid "" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." +msgstr "" +"Đường dẫn G-code được tạo sau khi đơn giản hóa đường viền của model để tránh " +"quá nhiều điểm và dòng G-code. Giá trị nhỏ hơn có nghĩa là độ phân giải cao " +"hơn và nhiều thời gian hơn để slice." + +msgid "Travel distance threshold" +msgstr "Ngưỡng khoảng cách di chuyển" + +msgid "" +"Only trigger retraction when the travel distance is longer than this " +"threshold." +msgstr "Chỉ kích hoạt rút khi khoảng cách di chuyển dài hơn ngưỡng này." + +msgid "Retract amount before wipe" +msgstr "Lượng rút trước khi lau" + +msgid "" +"The length of fast retraction before wipe, relative to retraction length." +msgstr "Độ dài của rút nhanh trước khi lau, tương đối với độ dài rút." + +msgid "Retract when change layer" +msgstr "Rút khi thay đổi lớp" + +msgid "Force a retraction when changes layer." +msgstr "Ép buộc rút khi thay đổi lớp." + +msgid "Retraction Length" +msgstr "Độ dài rút" + +msgid "" +"Some amount of material in extruder is pulled back to avoid ooze during long " +"travel. Set zero to disable retraction." +msgstr "" +"Một lượng vật liệu trong extruder được kéo lại để tránh chảy nhựa trong di " +"chuyển dài. Đặt không để tắt rút." + +msgid "Long retraction when cut (beta)" +msgstr "Rút dài khi cắt (beta)" + +msgid "" +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " +"significantly, it may also raise the risk of nozzle clogs or other printing " +"problems." +msgstr "" +"Tính năng thử nghiệm: Rút và cắt filament ở khoảng cách dài hơn trong khi " +"thay đổi để giảm thiểu xả. Mặc dù điều này giảm xả đáng kể, nó cũng có thể " +"làm tăng nguy cơ tắc đầu phun hoặc vấn đề in khác." + +msgid "Retraction distance when cut" +msgstr "Khoảng cách rút khi cắt" + +msgid "" +"Experimental feature: Retraction length before cutting off during filament " +"change." +msgstr "" +"Tính năng thử nghiệm: Độ dài rút trước khi cắt trong khi thay đổi filament." + +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Chiều cao Z-hop" + +msgid "" +"Whenever the retraction is done, the nozzle is lifted a little to create " +"clearance between nozzle and the print. It prevents nozzle from hitting the " +"print when travel move. Using spiral lines to lift Z can prevent stringing." +msgstr "" +"Bất cứ khi nào rút được thực hiện, đầu phun được nâng lên một chút để tạo " +"khoảng trống giữa đầu phun và bản in. Nó ngăn đầu phun va vào bản in khi di " +"chuyển. Sử dụng đường xoắn ốc để nâng Z có thể ngăn dây kéo." + +msgid "Z-hop lower boundary" +msgstr "Ranh giới dưới Z-hop" + +msgid "" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." +msgstr "" +"Z-hop sẽ chỉ có hiệu lực khi Z ở trên giá trị này và dưới tham số: \"Ranh " +"giới trên Z-hop\"." + +msgid "Z-hop upper boundary" +msgstr "Ranh giới trên Z-hop" + +msgid "" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." +msgstr "" +"Nếu giá trị này dương, Z-hop sẽ chỉ có hiệu lực khi Z ở trên tham số: \"Ranh " +"giới dưới Z-hop\" và dưới giá trị này." + +msgid "Z-hop type" +msgstr "Loại Z-hop" + +msgid "Type of Z-hop." +msgstr "Loại của Z-hop." + +msgid "Slope" +msgstr "Dốc" + +msgid "Spiral" +msgstr "Xoắn ốc" + +msgid "Traveling angle" +msgstr "Góc di chuyển" + +msgid "" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." +msgstr "" +"Góc di chuyển cho loại Z-hop Dốc và Xoắn ốc. Đặt nó thành 90° dẫn đến Nâng " +"bình thường." + +msgid "Only lift Z above" +msgstr "Chỉ nâng Z phía trên" + +msgid "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z." +msgstr "" +"Nếu bạn đặt điều này thành giá trị dương, nâng Z sẽ chỉ diễn ra phía trên Z " +"tuyệt đối được chỉ định." + +msgid "Only lift Z below" +msgstr "Chỉ nâng Z phía dưới" + +msgid "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z." +msgstr "" +"Nếu bạn đặt điều này thành giá trị dương, nâng Z sẽ chỉ diễn ra phía dưới Z " +"tuyệt đối được chỉ định." + +msgid "On surfaces" +msgstr "Trên bề mặt" + +msgid "" +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " +"lift Z above/below)." +msgstr "" +"Ép buộc hành vi Z-Hop. Cài đặt này bị ảnh hưởng bởi các cài đặt trên (Chỉ " +"nâng Z phía trên/dưới)." + +msgid "All Surfaces" +msgstr "Tất cả bề mặt" + +msgid "Top Only" +msgstr "Chỉ trên" + +msgid "Bottom Only" +msgstr "Chỉ dưới" + +msgid "Top and Bottom" +msgstr "Trên và dưới" + +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "Bowden" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + +msgid "Extra length on restart" +msgstr "Độ dài bổ sung khi khởi động lại" + +msgid "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." +msgstr "" +"Khi rút được bù sau khi di chuyển, extruder sẽ đẩy lượng filament bổ sung " +"này. Cài đặt này hiếm khi cần thiết." + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament." +msgstr "" +"Khi rút được bù sau khi thay công cụ, extruder sẽ đẩy lượng filament bổ sung " +"này." + +msgid "Retraction Speed" +msgstr "Tốc độ rút" + +msgid "Speed for retracting filament from the nozzle." +msgstr "Tốc độ để rút filament khỏi đầu phun." + +msgid "De-retraction Speed" +msgstr "Tốc độ bỏ rút" + +msgid "" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." +msgstr "" +"Tốc độ để nạp lại filament vào đầu phun. Không có nghĩa là cùng tốc độ rút." + +msgid "Use firmware retraction" +msgstr "Sử dụng rút firmware" + +msgid "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." +msgstr "" +"Cài đặt thử nghiệm này sử dụng lệnh G10 và G11 để firmware xử lý rút. Điều " +"này chỉ được hỗ trợ trong Marlin gần đây." + +msgid "Show auto-calibration marks" +msgstr "Hiển thị dấu tự động hiệu chỉnh" + +msgid "Disable set remaining print time" +msgstr "Tắt đặt thời gian in còn lại" + +msgid "" +"Disable generating of the M73: Set remaining print time in the final G-code." +msgstr "Tắt tạo M73: Đặt thời gian in còn lại trong G-code cuối cùng." + +msgid "Seam position" +msgstr "Vị trí đường nối" + +msgid "The start position to print each part of outer wall." +msgstr "Vị trí bắt đầu để in mỗi phần của thành ngoài." + +msgid "Nearest" +msgstr "Gần nhất" + +msgid "Aligned" +msgstr "Căn chỉnh" + +msgid "Aligned back" +msgstr "Căn chỉnh sau" + +msgid "Back" +msgstr "Sau" + +msgid "Random" +msgstr "Ngẫu nhiên" + +msgid "Staggered inner seams" +msgstr "Đường nối trong lệch tầng" + +msgid "" +"This option causes the inner seams to be shifted backwards based on their " +"depth, forming a zigzag pattern." +msgstr "" +"Tùy chọn này làm cho các đường nối trong bị dịch chuyển lùi lại dựa trên độ " +"sâu của chúng, tạo thành mẫu zigzag." + +msgid "Seam gap" +msgstr "Khe đường nối" + +msgid "" +"In order to reduce the visibility of the seam in a closed loop extrusion, " +"the loop is interrupted and shortened by a specified amount.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current extruder diameter. The default value for this parameter is 10%." +msgstr "" +"Để giảm khả năng nhìn thấy đường nối trong đùn vòng kín, vòng bị gián đoạn " +"và rút ngắn bởi một lượng được chỉ định.\n" +"Lượng này có thể được chỉ định bằng milimét hoặc dưới dạng phần trăm của " +"đường kính extruder hiện tại. Giá trị mặc định cho tham số này là 10%." + +msgid "Scarf joint seam (beta)" +msgstr "Đường nối khớp vát (beta)" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" +"Sử dụng khớp vát để giảm thiểu khả năng nhìn thấy đường nối và tăng độ bền " +"đường nối." + +msgid "Conditional scarf joint" +msgstr "Khớp vát có điều kiện" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" +"Áp dụng khớp vát chỉ cho chu vi mịn nơi đường nối truyền thống không che " +"giấu đường nối ở góc sắc nét hiệu quả." + +msgid "Conditional angle threshold" +msgstr "Ngưỡng góc có điều kiện" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" +"Tùy chọn này đặt ngưỡng góc để áp dụng đường nối khớp vát có điều kiện.\n" +"Nếu góc tối đa trong vòng chu vi vượt quá giá trị này (cho thấy không có góc " +"sắc nét), đường nối khớp vát sẽ được sử dụng. Giá trị mặc định là 155°." + +msgid "Conditional overhang threshold" +msgstr "Ngưỡng phần nhô có điều kiện" + +#, no-c-format, no-boost-format +msgid "" +"This option determines the overhang threshold for the application of scarf " +"joint seams. If the unsupported portion of the perimeter is less than this " +"threshold, scarf joint seams will be applied. The default threshold is set " +"at 40% of the external wall's width. Due to performance considerations, the " +"degree of overhang is estimated." +msgstr "" +"Tùy chọn này xác định ngưỡng phần nhô cho ứng dụng đường nối khớp vát. Nếu " +"phần không được hỗ trợ của chu vi nhỏ hơn ngưỡng này, đường nối khớp vát sẽ " +"được áp dụng. Ngưỡng mặc định được đặt ở 40% độ rộng thành ngoài. Do cân " +"nhắc hiệu suất, mức độ phần nhô được ước tính." + +msgid "Scarf joint speed" +msgstr "Tốc độ khớp vát" + +msgid "" +"This option sets the printing speed for scarf joints. It is recommended to " +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." +msgstr "" +"Tùy chọn này đặt tốc độ in cho khớp vát. Khuyến nghị in khớp vát ở tốc độ " +"chậm (ít hơn 100 mm/s). Cũng nên bật 'Làm mịn tốc độ đùn' nếu tốc độ đặt " +"khác đáng kể so với tốc độ của thành ngoài hoặc trong. Nếu tốc độ được chỉ " +"định ở đây cao hơn tốc độ của thành ngoài hoặc trong, máy in sẽ mặc định là " +"tốc độ chậm hơn trong hai tốc độ. Khi được chỉ định dưới dạng phần trăm (ví " +"dụ: 80%), tốc độ được tính dựa trên tốc độ thành ngoài hoặc trong tương ứng. " +"Giá trị mặc định được đặt thành 100%." + +msgid "Scarf joint flow ratio" +msgstr "Tỷ lệ lưu lượng khớp vát" + +msgid "This factor affects the amount of material for scarf joints." +msgstr "Hệ số này ảnh hưởng đến lượng vật liệu cho khớp vát." + +msgid "Scarf start height" +msgstr "Chiều cao bắt đầu vát" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" +"Chiều cao bắt đầu của vát.\n" +"Lượng này có thể được chỉ định bằng milimét hoặc dưới dạng phần trăm của " +"chiều cao lớp hiện tại. Giá trị mặc định cho tham số này là 0." + +msgid "Scarf around entire wall" +msgstr "Vát xung quanh toàn bộ thành" + +msgid "The scarf extends to the entire length of the wall." +msgstr "Vát mở rộng đến toàn bộ chiều dài của thành." + +msgid "Scarf length" +msgstr "Độ dài vát" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" +"Độ dài của vát. Đặt tham số này thành không có hiệu quả vô hiệu hóa vát." + +msgid "Scarf steps" +msgstr "Bước vát" + +msgid "Minimum number of segments of each scarf." +msgstr "Số lượng đoạn tối thiểu của mỗi vát." + +msgid "Scarf joint for inner walls" +msgstr "Khớp vát cho thành trong" + +msgid "Use scarf joint for inner walls as well." +msgstr "Sử dụng khớp vát cho thành trong cũng vậy." + +msgid "Role base wipe speed" +msgstr "Tốc độ lau dựa trên vai trò" + +msgid "" +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." +msgstr "" +"Tốc độ lau được xác định bởi tốc độ của vai trò đùn hiện tại. ví dụ nếu hành " +"động lau được thực hiện ngay sau khi đùn thành ngoài, tốc độ của đùn thành " +"ngoài sẽ được sử dụng cho hành động lau." + +msgid "Wipe on loops" +msgstr "Lau trên vòng" + +msgid "" +"To minimize the visibility of the seam in a closed loop extrusion, a small " +"inward movement is executed before the extruder leaves the loop." +msgstr "" +"Để giảm thiểu khả năng nhìn thấy đường nối trong đùn vòng kín, một chuyển " +"động vào trong nhỏ được thực hiện trước khi extruder rời khỏi vòng." + +msgid "Wipe before external loop" +msgstr "Lau trước vòng ngoài" + +msgid "" +"To minimize visibility of potential overextrusion at the start of an " +"external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order, the de-retraction is performed slightly on the inside from the " +"start of the external perimeter. That way any potential over extrusion is " +"hidden from the outside surface.\n" +"\n" +"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " +"print order as in these modes it is more likely an external perimeter is " +"printed immediately after a de-retraction move." +msgstr "" +"Để giảm thiểu khả năng nhìn thấy đùn dư tiềm ẩn ở đầu chu vi ngoài khi in " +"với thứ tự in thành Ngoài/Trong hoặc Trong/Ngoài/Trong , bỏ rút được thực " +"hiện một chút ở bên trong từ đầu chu vi ngoài. Theo cách đó bất kỳ đùn dư " +"tiềm ẩn nào được ẩn khỏi bề mặt ngoài.\n" +"\n" +"Điều này hữu ích khi in với thứ tự in thành Ngoài/Trong hoặc Trong/Ngoài/" +"Trong vì trong các chế độ này có nhiều khả năng chu vi ngoài được in ngay " +"sau động tác bỏ rút." + +msgid "Wipe speed" +msgstr "Tốc độ lau" + +msgid "" +"The wipe speed is determined by the speed setting specified in this " +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." +msgstr "" +"Tốc độ lau được xác định bởi cài đặt tốc độ được chỉ định trong cấu hình " +"này. Nếu giá trị được biểu thị dưới dạng phần trăm (ví dụ 80%), nó sẽ được " +"tính dựa trên cài đặt tốc độ di chuyển ở trên. Giá trị mặc định cho tham số " +"này là 80%." + +msgid "Skirt distance" +msgstr "Khoảng cách viền" + +msgid "The distance from the skirt to the brim or the object." +msgstr "Khoảng cách từ viền đến vành hoặc đối tượng." + +msgid "Skirt start point" +msgstr "Điểm bắt đầu viền" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"Góc từ trung tâm đối tượng đến điểm bắt đầu viền. Không là vị trí phải nhất, " +"ngược chiều kim đồng hồ là góc dương." + +msgid "Skirt height" +msgstr "Chiều cao viền" + +msgid "How many layers of skirt. Usually only one layer." +msgstr "Bao nhiêu lớp viền. Thường chỉ một lớp." + +msgid "Single loop after first layer" +msgstr "Vòng đơn sau lớp đầu tiên" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" +"Giới hạn các vòng viền/tấm chắn gió thành một thành sau lớp đầu tiên. Điều " +"này hữu ích, thỉnh thoảng, để bảo tồn filament nhưng có thể khiến tấm chắn " +"gió/viền cong vênh / nứt." + +msgid "Draft shield" +msgstr "Tấm chắn gió" + +msgid "" +"A draft shield is useful to protect an ABS or ASA print from warping and " +"detaching from print bed due to wind draft. It is usually needed only with " +"open frame printers, i.e. without an enclosure.\n" +"\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" +"Note: With the draft shield active, the skirt will be printed at skirt " +"distance from the object. Therefore, if brims are active it may intersect " +"with them. To avoid this, increase the skirt distance value.\n" +msgstr "" +"Tấm chắn gió hữu ích để bảo vệ bản in ABS hoặc ASA khỏi cong vênh và tách " +"khỏi bàn in do gió lùa. Nó thường chỉ cần với máy in khung mở, tức là không " +"có vỏ bọc.\n" +"\n" +"Đã bật = viền cao bằng đối tượng được in cao nhất. Ngược lại 'Chiều cao " +"viền' được sử dụng.\n" +"Lưu ý: Với tấm chắn gió hoạt động, viền sẽ được in ở khoảng cách viền từ " +"đối tượng. Do đó, nếu vành đang hoạt động nó có thể giao với chúng. Để tránh " +"điều này, hãy tăng giá trị khoảng cách viền.\n" + +msgid "Enabled" +msgstr "Đã bật" + +msgid "Skirt type" +msgstr "Loại viền" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "" +"Kết hợp - viền đơn cho tất cả đối tượng, Theo đối tượng - viền đối tượng " +"riêng lẻ." + +msgid "Per object" +msgstr "Theo đối tượng" + +msgid "Skirt loops" +msgstr "Vòng viền" + +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Số lượng vòng cho viền. Không có nghĩa là tắt viền." + +msgid "Skirt speed" +msgstr "Tốc độ viền" + +msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." +msgstr "" +"Tốc độ viền, tính bằng mm/s. Không có nghĩa là sử dụng tốc độ đùn lớp mặc " +"định." + +msgid "Skirt minimum extrusion length" +msgstr "Độ dài đùn tối thiểu viền" + +msgid "" +"Minimum filament extrusion length in mm when printing the skirt. Zero means " +"this feature is disabled.\n" +"\n" +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." +msgstr "" +"Độ dài đùn filament tối thiểu tính bằng mm khi in viền. Không có nghĩa tính " +"năng này bị tắt.\n" +"\n" +"Sử dụng giá trị khác không hữu ích nếu máy in được thiết lập để in mà không " +"có đường nạp.\n" +"Số lượng vòng cuối cùng không được tính trong khi sắp xếp hoặc xác thực " +"khoảng cách đối tượng. Tăng số vòng trong trường hợp đó." + +msgid "" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." +msgstr "" +"Tốc độ in trong G-code được xuất sẽ bị làm chậm lại khi thời gian lớp ước " +"tính ngắn hơn giá trị này để có làm mát tốt hơn cho các lớp này." + +msgid "Minimum sparse infill threshold" +msgstr "Ngưỡng infill thưa tối thiểu" + +msgid "" +"Sparse infill area which is smaller than threshold value is replaced by " +"internal solid infill." +msgstr "" +"Vùng infill thưa nhỏ hơn giá trị ngưỡng được thay thế bằng infill đặc bên " +"trong." + +msgid "Solid infill" +msgstr "Infill đặc" + +msgid "Filament to print solid infill." +msgstr "Filament để in infill đặc." + +msgid "" +"Line width of internal solid infill. If expressed as a %, it will be " +"computed over the nozzle diameter." +msgstr "" +"Độ rộng đường của infill đặc bên trong. Nếu được biểu thị dưới dạng %, nó sẽ " +"được tính trên đường kính đầu phun." + +msgid "Speed of internal solid infill, not the top and bottom surface." +msgstr "Tốc độ của infill đặc bên trong, không phải bề mặt trên và dưới." + +msgid "" +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " +"model into a single walled print with solid bottom layers. The final " +"generated model has no seam." +msgstr "" +"Xoắn ốc hóa làm mịn chuyển động z của đường viền ngoài. Và biến một model " +"đặc thành bản in thành đơn với các lớp dưới đặc. Model được tạo cuối cùng " +"không có đường nối." + +msgid "Smooth Spiral" +msgstr "Xoắn ốc mịn" + +msgid "" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." +msgstr "" +"Xoắn ốc mịn làm mịn chuyển động X và Y cũng vậy, dẫn đến không có đường nối " +"nhìn thấy, ngay cả theo hướng XY trên thành không dọc." + +msgid "Max XY Smoothing" +msgstr "Làm mịn XY tối đa" + +#, no-c-format, no-boost-format +msgid "" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." +msgstr "" +"Khoảng cách tối đa để di chuyển điểm trong XY để cố gắng đạt được xoắn ốc " +"mịn. Nếu được biểu thị dưới dạng %, nó sẽ được tính trên đường kính đầu phun." + +msgid "Spiral starting flow ratio" +msgstr "Tỷ lệ lưu lượng bắt đầu xoắn ốc" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"Đặt tỷ lệ lưu lượng bắt đầu trong khi chuyển đổi từ lớp dưới cuối cùng sang " +"xoắn ốc. Thông thường chuyển đổi xoắn ốc tỷ lệ tỷ lệ lưu lượng từ 0% đến " +"100% trong vòng đầu tiên có thể trong một số trường hợp dẫn đến đùn thiếu ở " +"đầu xoắn ốc." + +msgid "Spiral finishing flow ratio" +msgstr "Tỷ lệ lưu lượng kết thúc xoắn ốc" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"Đặt tỷ lệ lưu lượng kết thúc trong khi kết thúc xoắn ốc. Thông thường xoắn " +"ốc chuyển đổi tỷ lệ tỷ lệ lưu lượng từ 100% đến 0% trong vòng cuối cùng có " +"thể trong một số trường hợp dẫn đến đùn thiếu ở cuối xoắn ốc." + +msgid "" +"If smooth or traditional mode is selected, a timelapse video will be " +"generated for each print. After each layer is printed, a snapshot is taken " +"with the chamber camera. All of these snapshots are composed into a " +"timelapse video when printing completes. If smooth mode is selected, the " +"toolhead will move to the excess chute after each layer is printed and then " +"take a snapshot. Since the melt filament may leak from the nozzle during the " +"process of taking a snapshot, prime tower is required for smooth mode to " +"wipe nozzle." +msgstr "" +"Nếu chế độ mịn hoặc truyền thống được chọn, video timelapse sẽ được tạo cho " +"mỗi bản in. Sau mỗi lớp được in, ảnh chụp nhanh được chụp bằng camera buồng. " +"Tất cả các ảnh chụp nhanh này được soạn thành video timelapse khi in hoàn " +"thành. Nếu chế độ mịn được chọn, đầu công cụ sẽ di chuyển đến máng dư thừa " +"sau mỗi lớp được in và sau đó chụp ảnh nhanh. Vì filament nóng chảy có thể " +"rò rỉ từ đầu phun trong quá trình chụp ảnh nhanh, prime tower là cần thiết " +"cho chế độ mịn để lau đầu phun." + +msgid "Traditional" +msgstr "Truyền thống" + +msgid "Temperature variation" +msgstr "Thay đổi nhiệt độ" + +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"Chênh lệch nhiệt độ được áp dụng khi extruder không hoạt động. Giá trị không " +"được sử dụng khi 'idle_temperature' trong cài đặt filament được đặt thành " +"giá trị khác không." + +msgid "Preheat time" +msgstr "Thời gian làm nóng trước" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"Để giảm thời gian chờ sau khi thay công cụ, Orca có thể làm nóng trước công " +"cụ tiếp theo trong khi công cụ hiện tại vẫn đang sử dụng. Cài đặt này chỉ " +"định thời gian tính bằng giây để làm nóng trước công cụ tiếp theo. Orca sẽ " +"chèn lệnh M104 để làm nóng trước công cụ trước." + +msgid "Preheat steps" +msgstr "Bước làm nóng trước" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"Chèn nhiều lệnh làm nóng trước (ví dụ M104.1). Chỉ hữu ích cho Prusa XL. Đối " +"với các máy in khác, vui lòng đặt nó thành 1." + +msgid "Start G-code" +msgstr "G-code bắt đầu" + +msgid "Start G-code when starting the entire print." +msgstr "G-code bắt đầu khi bắt đầu toàn bộ bản in." + +msgid "Start G-code when starting the printing of this filament." +msgstr "G-code bắt đầu khi bắt đầu in filament này." + +msgid "Single Extruder Multi Material" +msgstr "Extruder đơn đa vật liệu" + +msgid "Use single nozzle to print multi filament." +msgstr "Sử dụng đầu phun đơn để in nhiều filament." + +msgid "Manual Filament Change" +msgstr "Thay filament thủ công" + +msgid "" +"Enable this option to omit the custom Change filament G-code only at the " +"beginning of the print. The tool change command (e.g., T0) will be skipped " +"throughout the entire print. This is useful for manual multi-material " +"printing, where we use M600/PAUSE to trigger the manual filament change " +"action." +msgstr "" +"Bật tùy chọn này để bỏ qua G-code thay filament tùy chỉnh chỉ ở đầu bản in. " +"Lệnh thay công cụ (ví dụ: T0) sẽ bị bỏ qua trong toàn bộ bản in. Điều này " +"hữu ích cho in đa vật liệu thủ công, nơi chúng ta sử dụng M600/PAUSE để kích " +"hoạt hành động thay filament thủ công." + +msgid "Purge in prime tower" +msgstr "Xả trong prime tower" + +msgid "Purge remaining filament into prime tower." +msgstr "Xả filament còn lại vào prime tower." + +msgid "Enable filament ramming" +msgstr "Bật ramming filament" + +msgid "No sparse layers (beta)" +msgstr "Không có lớp thưa (beta)" + +msgid "" +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " +"print the wipe tower. User is responsible for ensuring there is no collision " +"with the print." +msgstr "" +"Nếu được bật, wipe tower sẽ không được in trên các lớp không có thay đổi " +"công cụ. Trên các lớp có thay đổi công cụ, extruder sẽ di chuyển xuống để in " +"wipe tower. Người dùng chịu trách nhiệm đảm bảo không có va chạm với bản in." + +msgid "Prime all printing extruders" +msgstr "Nạp tất cả extruder in" + +msgid "" +"If enabled, all printing extruders will be primed at the front edge of the " +"print bed at the start of the print." +msgstr "" +"Nếu được bật, tất cả extruder in sẽ được nạp ở mép trước của bàn in lúc bắt " +"đầu in." + +msgid "Slice gap closing radius" +msgstr "Bán kính đóng khe slice" + +msgid "" +"Cracks smaller than 2x gap closing radius are being filled during the " +"triangle mesh slicing. The gap closing operation may reduce the final print " +"resolution, therefore it is advisable to keep the value reasonably low." +msgstr "" +"Vết nứt nhỏ hơn 2x bán kính đóng khe được lấp trong slice mesh tam giác. " +"Thao tác đóng khe có thể giảm độ phân giải in cuối cùng, do đó nên giữ giá " +"trị ở mức hợp lý thấp." + +msgid "Slicing Mode" +msgstr "Chế độ slice" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" +"Sử dụng \"Chẵn-lẻ\" cho model máy bay 3DLabPrint. Sử dụng \"Đóng lỗ\" để " +"đóng tất cả các lỗ trong model." + +msgid "Regular" +msgstr "Thông thường" + +msgid "Even-odd" +msgstr "Chẵn-lẻ" + +msgid "Close holes" +msgstr "Đóng lỗ" + +msgid "Z offset" +msgstr "Độ lệch Z" + +msgid "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." +msgstr "" +"Giá trị này sẽ được cộng (hoặc trừ) từ tất cả tọa độ Z trong G-code đầu ra. " +"Nó được sử dụng để bù cho vị trí endstop Z xấu: ví dụ, nếu endstop không của " +"bạn thực sự để đầu phun 0.3mm xa bàn in, đặt điều này thành -0.3 (hoặc sửa " +"endstop của bạn)." + +msgid "Enable support" +msgstr "Bật support" + +msgid "Enable support generation." +msgstr "Bật tạo support." + +msgid "" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." +msgstr "" +"Thông thường (tự động) và Cây (tự động) được sử dụng để tạo support tự động. " +"Nếu Thông thường (thủ công) hoặc Cây (thủ công) được chọn, chỉ có trình thực " +"thi support được tạo." + +msgid "Normal (auto)" +msgstr "Thông thường (tự động)" + +msgid "Tree (auto)" +msgstr "Cây (tự động)" + +msgid "Normal (manual)" +msgstr "Thông thường (thủ công)" + +msgid "Tree (manual)" +msgstr "Cây (thủ công)" + +msgid "Support/object XY distance" +msgstr "Khoảng cách XY support/đối tượng" + +msgid "XY separation between an object and its support." +msgstr "Phân cách XY giữa đối tượng và support của nó." + +msgid "Support/object first layer gap" +msgstr "Khe lớp đầu tiên support/đối tượng" + +msgid "XY separation between an object and its support at the first layer." +msgstr "Phân cách XY giữa đối tượng và support của nó ở lớp đầu tiên." + +msgid "Pattern angle" +msgstr "Góc mẫu" + +msgid "Use this setting to rotate the support pattern on the horizontal plane." +msgstr "Sử dụng cài đặt này để xoay mẫu support trên mặt phẳng ngang." + +msgid "On build plate only" +msgstr "Chỉ trên bàn in" + +msgid "Don't create support on model surface, only on build plate." +msgstr "Không tạo support trên bề mặt model, chỉ trên bàn in." + +msgid "Support critical regions only" +msgstr "Chỉ support vùng quan trọng" + +msgid "" +"Only create support for critical regions including sharp tail, cantilever, " +"etc." +msgstr "" +"Chỉ tạo support cho các vùng quan trọng bao gồm đuôi sắc nét, công xôn, v.v." + +msgid "Ignore small overhangs" +msgstr "" + +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" + +msgid "Top Z distance" +msgstr "Khoảng cách Z trên" + +msgid "The Z gap between the top support interface and object." +msgstr "Khe Z giữa giao diện support trên và đối tượng." + +msgid "Bottom Z distance" +msgstr "Khoảng cách Z dưới" + +msgid "The Z gap between the bottom support interface and object." +msgstr "Khe Z giữa giao diện support dưới và đối tượng." + +msgid "Support/raft base" +msgstr "Đế support/raft" + +msgid "" +"Filament to print support base and raft. \"Default\" means no specific " +"filament for support and current filament is used." +msgstr "" +"Filament để in đế support và raft. \"Mặc định\" có nghĩa là không có " +"filament cụ thể cho support và filament hiện tại được sử dụng." + +msgid "Avoid interface filament for base" +msgstr "Tránh filament giao diện cho đế" + +msgid "" +"Avoid using support interface filament to print support base if possible." +msgstr "Tránh sử dụng filament giao diện support để in đế support nếu có thể." + +msgid "" +"Line width of support. If expressed as a %, it will be computed over the " +"nozzle diameter." +msgstr "" +"Độ rộng đường của support. Nếu được biểu thị dưới dạng %, nó sẽ được tính " +"trên đường kính đầu phun." + +msgid "Interface use loop pattern" +msgstr "Giao diện sử dụng mẫu vòng" + +msgid "" +"Cover the top contact layer of the supports with loops. Disabled by default." +msgstr "Bao phủ lớp tiếp xúc trên của support bằng vòng. Bị tắt theo mặc định." + +msgid "Support/raft interface" +msgstr "Giao diện support/raft" + +msgid "" +"Filament to print support interface. \"Default\" means no specific filament " +"for support interface and current filament is used." +msgstr "" +"Filament để in giao diện support. \"Mặc định\" có nghĩa là không có filament " +"cụ thể cho giao diện support và filament hiện tại được sử dụng." + +msgid "Top interface layers" +msgstr "Lớp giao diện trên" + +msgid "Number of top interface layers." +msgstr "Số lượng lớp giao diện trên." + +msgid "Bottom interface layers" +msgstr "Lớp giao diện dưới" + +msgid "Number of bottom interface layers." +msgstr "Số lượng lớp giao diện dưới." + +msgid "Same as top" +msgstr "Giống như trên" + +msgid "Top interface spacing" +msgstr "Khoảng cách giao diện trên" + +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" +"Khoảng cách của các đường giao diện. Không có nghĩa là giao diện đặc.\n" +"Ép buộc sử dụng giao diện đặc khi ủi support được bật." + +msgid "Bottom interface spacing" +msgstr "Khoảng cách giao diện dưới" + +msgid "Spacing of bottom interface lines. Zero means solid interface." +msgstr "" +"Khoảng cách của các đường giao diện dưới. Không có nghĩa là giao diện đặc." + +msgid "Speed of support interface." +msgstr "Tốc độ của giao diện support." + +msgid "Base pattern" +msgstr "Mẫu đế" + +msgid "Line pattern of support." +msgstr "Mẫu đường của support." + +msgid "Rectilinear grid" +msgstr "Lưới thẳng" + +msgid "Hollow" +msgstr "Rỗng" + +msgid "Interface pattern" +msgstr "Mẫu giao diện" + +msgid "" +"Line pattern of support interface. Default pattern for non-soluble support " +"interface is Rectilinear, while default pattern for soluble support " +"interface is Concentric." +msgstr "" +"Mẫu đường của giao diện support. Mẫu mặc định cho giao diện support không " +"hòa tan là Thẳng, trong khi mẫu mặc định cho giao diện support hòa tan là " +"Đồng tâm." + +msgid "Rectilinear Interlaced" +msgstr "Thẳng xen kẽ" + +msgid "Base pattern spacing" +msgstr "Khoảng cách mẫu đế" + +msgid "Spacing between support lines." +msgstr "Khoảng cách giữa các đường support." + +msgid "Normal Support expansion" +msgstr "Mở rộng support thông thường" + +msgid "Expand (+) or shrink (-) the horizontal span of normal support." +msgstr "Mở rộng (+) hoặc co lại (-) phạm vi ngang của support thông thường." + +msgid "Speed of support." +msgstr "Tốc độ của support." + +msgid "" +"Style and shape of the support. For normal support, projecting the supports " +"into a regular grid will create more stable supports (default), while snug " +"support towers will save material and reduce object scarring.\n" +"For tree support, slim and organic style will merge branches more " +"aggressively and save a lot of material (default organic), while hybrid " +"style will create similar structure to normal support under large flat " +"overhangs." +msgstr "" +"Kiểu dáng và hình dạng của support. Đối với support thông thường, chiếu " +"support vào lưới đều sẽ tạo support ổn định hơn (mặc định), trong khi tháp " +"support khít sẽ tiết kiệm vật liệu và giảm vết sẹo đối tượng.\n" +"Đối với support cây, kiểu mảnh và hữu cơ sẽ hợp nhất nhánh tích cực hơn và " +"tiết kiệm nhiều vật liệu (mặc định hữu cơ), trong khi kiểu hybrid sẽ tạo cấu " +"trúc tương tự support thông thường dưới phần nhô phẳng lớn." + +msgid "Default (Grid/Organic)" +msgstr "Mặc định (Lưới/Hữu cơ)" + +msgid "Snug" +msgstr "Khít" + +msgid "Organic" +msgstr "Hữu cơ" + +msgid "Tree Slim" +msgstr "Cây mảnh" + +msgid "Tree Strong" +msgstr "Cây mạnh" + +msgid "Tree Hybrid" +msgstr "Cây hybrid" + +msgid "Independent support layer height" +msgstr "Chiều cao lớp support độc lập" + +msgid "" +"Support layer uses layer height independent with object layer. This is to " +"support customizing Z-gap and save print time. This option will be invalid " +"when the prime tower is enabled." +msgstr "" +"Lớp support sử dụng chiều cao lớp độc lập với lớp đối tượng. Điều này là để " +"hỗ trợ tùy chỉnh khe z và tiết kiệm thời gian in. Tùy chọn này sẽ không hợp " +"lệ khi prime tower được bật." + +msgid "Threshold angle" +msgstr "Góc ngưỡng" + +msgid "" +"Support will be generated for overhangs whose slope angle is below the " +"threshold." +msgstr "Support sẽ được tạo cho phần nhô có góc dốc dưới ngưỡng." + +msgid "Threshold overlap" +msgstr "Chồng lấp ngưỡng" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"Nếu góc ngưỡng là không, support sẽ được tạo cho phần nhô có chồng lấp dưới " +"ngưỡng. Giá trị này càng nhỏ, phần nhô càng dốc có thể được in mà không cần " +"support." + +msgid "Tree support branch angle" +msgstr "Góc nhánh support cây" + +msgid "" +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " +"printed more horizontally, allowing them to reach farther." +msgstr "" +"Cài đặt này xác định góc nhô tối đa mà các nhánh của support cây được phép " +"tạo. Nếu góc được tăng lên, các nhánh có thể được in ngang hơn, cho phép " +"chúng đạt xa hơn." + +msgid "Preferred Branch Angle" +msgstr "Góc nhánh ưa thích" + +#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" +msgid "" +"The preferred angle of the branches, when they do not have to avoid the " +"model. Use a lower angle to make them more vertical and more stable. Use a " +"higher angle for branches to merge faster." +msgstr "" +"Góc ưa thích của các nhánh, khi chúng không phải tránh model. Sử dụng góc " +"thấp hơn để làm cho chúng dọc hơn và ổn định hơn. Sử dụng góc cao hơn để các " +"nhánh hợp nhất nhanh hơn." + +msgid "Tree support branch distance" +msgstr "Khoảng cách nhánh support cây" + +msgid "" +"This setting determines the distance between neighboring tree support nodes." +msgstr "Cài đặt này xác định khoảng cách giữa các nút support cây lân cận." + +msgid "Branch Density" +msgstr "Mật độ nhánh" + +#. TRN PrintSettings: "Organic supports" > "Branch Density" +msgid "" +"Adjusts the density of the support structure used to generate the tips of " +"the branches. A higher value results in better overhangs but the supports " +"are harder to remove, thus it is recommended to enable top support " +"interfaces instead of a high branch density value if dense interfaces are " +"needed." +msgstr "" +"Điều chỉnh mật độ của cấu trúc support được sử dụng để tạo đầu các nhánh. " +"Giá trị cao hơn dẫn đến phần nhô tốt hơn nhưng support khó loại bỏ hơn, do " +"đó khuyến nghị bật giao diện support trên thay vì giá trị mật độ nhánh cao " +"nếu cần giao diện dày đặc ." + +msgid "Auto brim width" +msgstr "Độ rộng vành tự động" + +msgid "" +"Enabling this option means the width of the brim for tree support will be " +"automatically calculated." +msgstr "" +"Bật tùy chọn này có nghĩa là độ rộng vành cho support cây sẽ được tính toán " +"tự động." + +msgid "Tree support brim width" +msgstr "Độ rộng vành support cây" + +msgid "Distance from tree branch to the outermost brim line." +msgstr "Khoảng cách từ nhánh cây đến đường vành ngoài cùng." + +msgid "Tip Diameter" +msgstr "Đường kính đầu" + +#. TRN PrintSettings: "Organic supports" > "Tip Diameter" +msgid "Branch tip diameter for organic supports." +msgstr "Đường kính đầu nhánh cho support hữu cơ." + +msgid "Tree support branch diameter" +msgstr "Đường kính nhánh support cây" + +msgid "This setting determines the initial diameter of support nodes." +msgstr "Cài đặt này xác định đường kính ban đầu của các nút support." + +#. TRN PrintSettings: #lmFIXME +msgid "Branch Diameter Angle" +msgstr "Góc đường kính nhánh" + +#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" +msgid "" +"The angle of the branches' diameter as they gradually become thicker towards " +"the bottom. An angle of 0 will cause the branches to have uniform thickness " +"over their length. A bit of an angle can increase stability of the organic " +"support." +msgstr "" +"Góc của đường kính nhánh khi chúng dần dày lên về phía dưới. Góc 0 sẽ làm " +"cho các nhánh có độ dày đồng đều trên chiều dài của chúng. Một chút góc có " +"thể tăng độ ổn định của support hữu cơ." + +msgid "Support wall loops" +msgstr "Vòng thành support" + +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "" +"Cài đặt này chỉ định số lượng thành support trong phạm vi [0,2]. 0 có nghĩa " +"là tự động." + +msgid "Tree support with infill" +msgstr "Support cây có infill" + +msgid "" +"This setting specifies whether to add infill inside large hollows of tree " +"support." +msgstr "" +"Cài đặt này chỉ định có thêm infill vào bên trong khoảng trống lớn của " +"support cây hay không." + +msgid "Ironing Support Interface" +msgstr "Ủi giao diện support" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" +"Ủi là sử dụng lưu lượng nhỏ để in lại trên cùng chiều cao của giao diện " +"support để làm cho nó mịn hơn. Cài đặt này điều khiển có ủi giao diện " +"support hay không. Khi được bật, giao diện support cũng sẽ được đùn dưới " +"dạng đặc." + +msgid "Support Ironing Pattern" +msgstr "Mẫu ủi support" + +msgid "Support Ironing flow" +msgstr "Lưu lượng ủi support" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" +"Lượng vật liệu để đùn trong khi ủi. Tương đối với lưu lượng của chiều cao " +"lớp giao diện support bình thường. Giá trị quá cao dẫn đến đùn dư trên bề " +"mặt." + +msgid "Support Ironing line spacing" +msgstr "Khoảng cách đường ủi support" + +msgid "Activate temperature control" +msgstr "Kích hoạt điều khiển nhiệt độ" + +msgid "" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." +msgstr "" +"Bật tùy chọn này để điều khiển nhiệt độ buồng tự động. Tùy chọn này kích " +"hoạt việc phát lệnh M191 trước \"machine_start_gcode\"\n" +" để đặt nhiệt độ buồng và chờ cho đến khi đạt được. Ngoài ra, nó phát lệnh " +"M141 ở cuối bản in để tắt bộ sưởi buồng, nếu có.\n" +"\n" +"Tùy chọn này dựa vào firmware hỗ trợ lệnh M191 và M141 thông qua macro hoặc " +"gốc và thường được sử dụng khi bộ sưởi buồng hoạt động được cài đặt." + +msgid "Chamber temperature" +msgstr "Nhiệt độ buồng" + +msgid "" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." +msgstr "" +"Đối với vật liệu nhiệt độ cao như ABS, ASA, PC và PA, nhiệt độ buồng cao hơn " +"có thể giúp ngăn chặn hoặc giảm cong vênh và có khả năng dẫn đến độ bền liên " +"kết giữa các lớp cao hơn. Tuy nhiên, đồng thời, nhiệt độ buồng cao hơn sẽ " +"giảm hiệu quả lọc không khí cho ABS và ASA.\n" +"\n" +"Đối với PLA, PETG, TPU, PVA và các vật liệu nhiệt độ thấp khác, tùy chọn này " +"nên được tắt (đặt thành 0) vì nhiệt độ buồng nên thấp để tránh tắc extruder " +"do vật liệu làm mềm ở heat break.\n" +"\n" +"Nếu được bật, tham số này cũng đặt biến G-code có tên chamber_temperature, " +"có thể được sử dụng để truyền nhiệt độ buồng mong muốn cho macro bắt đầu in " +"của bạn, hoặc macro ngâm nhiệt như thế này: PRINT_START (các biến khác) " +"CHAMBER_TEMP=[chamber_temperature]. Điều này có thể hữu ích nếu máy in của " +"bạn không hỗ trợ lệnh M141/M191, hoặc nếu bạn muốn xử lý ngâm nhiệt trong " +"macro bắt đầu in nếu không có bộ sưởi buồng hoạt động được cài đặt." + +msgid "Nozzle temperature for layers after the initial one." +msgstr "Nhiệt độ đầu phun cho các lớp sau lớp đầu tiên." + +msgid "Detect thin wall" +msgstr "Phát hiện thành mỏng" + +msgid "" +"Detect thin wall which can't contain two line width. And use single line to " +"print. Maybe printed not very well, because it's not closed loop." +msgstr "" +"Phát hiện thành mỏng không thể chứa hai độ rộng đường. Và sử dụng đường đơn " +"để in. Có thể in không tốt lắm, vì nó không phải vòng kín." + +msgid "" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." +msgstr "" +"G-code này được chèn khi filament được thay đổi, bao gồm lệnh T để kích hoạt " +"thay công cụ." + +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "G-code này được chèn khi vai trò đùn được thay đổi." + +msgid "" +"Line width for top surfaces. If expressed as a %, it will be computed over " +"the nozzle diameter." +msgstr "" +"Độ rộng đường cho bề mặt trên. Nếu được biểu thị dưới dạng %, nó sẽ được " +"tính trên đường kính đầu phun." + +msgid "Speed of top surface infill which is solid." +msgstr "Tốc độ của infill bề mặt trên là đặc." + +msgid "Top shell layers" +msgstr "Lớp vỏ trên" + +msgid "" +"This is the number of solid layers of top shell, including the top surface " +"layer. When the thickness calculated by this value is thinner than top shell " +"thickness, the top shell layers will be increased." +msgstr "" +"Đây là số lượng lớp đặc của vỏ trên, bao gồm lớp bề mặt trên. Khi độ dày " +"được tính bởi giá trị này mỏng hơn độ dày vỏ trên, các lớp vỏ trên sẽ được " +"tăng lên." + +msgid "Top solid layers" +msgstr "Lớp đặc trên" + +msgid "Top shell thickness" +msgstr "Độ dày vỏ trên" + +msgid "" +"The number of top solid layers is increased when slicing if the thickness " +"calculated by top shell layers is thinner than this value. This can avoid " +"having too thin shell when layer height is small. 0 means that this setting " +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." +msgstr "" +"Số lượng lớp đặc trên được tăng lên khi slice nếu độ dày được tính bởi lớp " +"vỏ trên mỏng hơn giá trị này. Điều này có thể tránh vỏ quá mỏng khi chiều " +"cao lớp nhỏ. 0 có nghĩa là cài đặt này bị tắt và độ dày vỏ trên được xác " +"định tuyệt đối bởi lớp vỏ trên." + +msgid "Top surface density" +msgstr "Mật độ bề mặt trên" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" +"Mật độ lớp bề mặt trên. Giá trị 100% tạo ra lớp trên hoàn toàn đặc, mịn . " +"Giảm giá trị này dẫn đến bề mặt trên có kết cấu, theo mẫu bề mặt trên được " +"chọn. Giá trị 0% sẽ dẫn đến chỉ thành trên lớp trên được tạo. Dành cho mục " +"đích thẩm mỹ hoặc chức năng , không phải để sửa các vấn đề như đùn dư." + +msgid "Bottom surface density" +msgstr "Mật độ bề mặt dưới" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" +"Mật độ lớp bề mặt dưới. Dành cho mục đích thẩm mỹ hoặc chức năng , không " +"phải để sửa các vấn đề như đùn dư.\n" +"CẢNH BÁO: Giảm giá trị này có thể ảnh hưởng tiêu cực đến độ bám dính bàn in." + +msgid "Speed of travel which is faster and without extrusion." +msgstr "Tốc độ di chuyển nhanh hơn và không có đùn." + +msgid "Wipe while retracting" +msgstr "Lau trong khi rút" + +msgid "" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." +msgstr "" +"Di chuyển đầu phun dọc theo đường đùn cuối cùng khi rút để làm sạch bất kỳ " +"vật liệu rò rỉ nào trên đầu phun. Điều này có thể giảm thiểu cục nhỏ khi in " +"phần mới sau khi di chuyển." + +msgid "Wipe Distance" +msgstr "Khoảng cách lau" + +msgid "" +"Describe how long the nozzle will move along the last path when retracting.\n" +"\n" +"Depending on how long the wipe operation lasts, how fast and long the " +"extruder/filament retraction settings are, a retraction move may be needed " +"to retract the remaining filament.\n" +"\n" +"Setting a value in the retract amount before wipe setting below will perform " +"any excess retraction before the wipe, else it will be performed after." +msgstr "" +"Mô tả khoảng cách đầu phun sẽ di chuyển dọc theo đường cuối cùng khi rút.\n" +"\n" +"Tùy thuộc vào thao tác lau kéo dài bao lâu, cài đặt rút extruder/filament " +"nhanh và dài như thế nào, động tác rút có thể cần thiết để rút filament còn " +"lại.\n" +"\n" +"Đặt giá trị trong cài đặt lượng rút trước khi lau bên dưới sẽ thực hiện bất " +"kỳ rút dư nào trước khi lau, nếu không nó sẽ được thực hiện sau." + +msgid "" +"The wiping tower can be used to clean up the residue on the nozzle and " +"stabilize the chamber pressure inside the nozzle, in order to avoid " +"appearance defects when printing objects." +msgstr "" +"Wipe tower có thể được sử dụng để làm sạch cặn trên đầu phun và ổn định áp " +"suất buồng bên trong đầu phun, để tránh khuyết điểm bề ngoài khi in đối " +"tượng." + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + +msgid "Purging volumes" +msgstr "Khối lượng xả" + +msgid "Flush multiplier" +msgstr "Hệ số xả" + +msgid "" +"The actual flushing volumes is equal to the flush multiplier multiplied by " +"the flushing volumes in the table." +msgstr "Khối lượng xả thực tế bằng hệ số xả nhân với khối lượng xả trong bảng." + +msgid "Prime volume" +msgstr "Khối lượng nạp" + +msgid "The volume of material to prime extruder on tower." +msgstr "Khối lượng vật liệu để nạp extruder trên tower." + +msgid "Width of the prime tower." +msgstr "Độ rộng của prime tower." + +msgid "Wipe tower rotation angle" +msgstr "Góc xoay wipe tower" + +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "Góc xoay wipe tower so với trục X." + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + +msgid "Stabilization cone apex angle" +msgstr "Góc đỉnh nón ổn định" + +msgid "" +"Angle at the apex of the cone that is used to stabilize the wipe tower. " +"Larger angle means wider base." +msgstr "" +"Góc ở đỉnh của nón được sử dụng để ổn định wipe tower. Góc lớn hơn có nghĩa " +"là đế rộng hơn." + +msgid "Maximum wipe tower print speed" +msgstr "Tốc độ in wipe tower tối đa" + +msgid "" +"The maximum print speed when purging in the wipe tower and printing the wipe " +"tower sparse layers. When purging, if the sparse infill speed or calculated " +"speed from the filament max volumetric speed is lower, the lowest will be " +"used instead.\n" +"\n" +"When printing the sparse layers, if the internal perimeter speed or " +"calculated speed from the filament max volumetric speed is lower, the lowest " +"will be used instead.\n" +"\n" +"Increasing this speed may affect the tower's stability as well as increase " +"the force with which the nozzle collides with any blobs that may have formed " +"on the wipe tower.\n" +"\n" +"Before increasing this parameter beyond the default of 90 mm/s, make sure " +"your printer can reliably bridge at the increased speeds and that ooze when " +"tool changing is well controlled.\n" +"\n" +"For the wipe tower external perimeters the internal perimeter speed is used " +"regardless of this setting." +msgstr "" +"Tốc độ in tối đa khi xả trong wipe tower và in các lớp thưa của wipe tower. " +"Khi xả, nếu tốc độ infill thưa hoặc tốc độ được tính từ tốc độ thể tích tối " +"đa của filament thấp hơn, tốc độ thấp nhất sẽ được sử dụng thay thế.\n" +"\n" +"Khi in các lớp thưa, nếu tốc độ chu vi bên trong hoặc tốc độ được tính từ " +"tốc độ thể tích tối đa của filament thấp hơn, tốc độ thấp nhất sẽ được sử " +"dụng thay thế.\n" +"\n" +"Tăng tốc độ này có thể ảnh hưởng đến độ ổn định của tower cũng như tăng lực " +"mà đầu phun va chạm với bất kỳ cục nhỏ nào có thể đã hình thành trên wipe " +"tower.\n" +"\n" +"Trước khi tăng tham số này vượt quá mặc định 90 mm/s, hãy đảm bảo máy in của " +"bạn có thể nối cầu đáng tin cậy ở tốc độ tăng và chảy nhựa khi thay công cụ " +"được kiểm soát tốt.\n" +"\n" +"Đối với chu vi bên ngoài wipe tower, tốc độ chu vi bên trong được sử dụng " +"bất kể cài đặt này." + +msgid "Wall type" +msgstr "Loại thành" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"Loại thành ngoài wipe tower.\n" +"1. Hình chữ nhật: Loại thành mặc định, hình chữ nhật có độ rộng và chiều cao " +"cố định.\n" +"2. Nón: Một nón có bo tròn ở dưới để giúp ổn định wipe tower.\n" +"3. Gân: Thêm bốn gân vào thành tower để tăng cường độ ổn định." + +msgid "Extra rib length" +msgstr "Độ dài gân bổ sung" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"Giá trị dương có thể tăng kích thước thành gân, trong khi giá trị âm có thể " +"giảm kích thước. Tuy nhiên, kích thước thành gân không thể nhỏ hơn kích " +"thước được xác định bởi khối lượng làm sạch." + +msgid "Rib width" +msgstr "Độ rộng gân" + +msgid "Rib width." +msgstr "Độ rộng gân." + +msgid "Fillet wall" +msgstr "Thành bo tròn" + +msgid "The wall of prime tower will fillet." +msgstr "Thành của prime tower sẽ bo tròn." + +msgid "" +"The extruder to use when printing perimeter of the wipe tower. Set to 0 to " +"use the one that is available (non-soluble would be preferred)." +msgstr "" +"Extruder để sử dụng khi in chu vi của wipe tower. Đặt thành 0 để sử dụng cái " +"có sẵn (không hòa tan sẽ được ưu tiên)." + +msgid "Purging volumes - load/unload volumes" +msgstr "Khối lượng xả - khối lượng nạp/tháo" + +msgid "" +"This vector saves required volumes to change from/to each tool used on the " +"wipe tower. These values are used to simplify creation of the full purging " +"volumes below." +msgstr "" +"Vector này lưu khối lượng cần thiết để thay đổi từ/sang mỗi công cụ được sử " +"dụng trên wipe tower. Các giá trị này được sử dụng để đơn giản hóa tạo khối " +"lượng xả đầy đủ bên dưới." + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + +msgid "" +"Purging after filament change will be done inside objects' infills. This may " +"lower the amount of waste and decrease the print time. If the walls are " +"printed with transparent filament, the mixed color infill will be seen " +"outside. It will not take effect, unless the prime tower is enabled." +msgstr "" +"Xả sau khi thay filament sẽ được thực hiện bên trong infill của đối tượng. " +"Điều này có thể giảm lượng chất thải và giảm thời gian in. Nếu thành được in " +"bằng filament trong suốt, infill màu trộn sẽ được nhìn thấy bên ngoài. Nó sẽ " +"không có hiệu lực, trừ khi prime tower được bật." + +msgid "" +"Purging after filament change will be done inside objects' support. This may " +"lower the amount of waste and decrease the print time. It will not take " +"effect, unless the prime tower is enabled." +msgstr "" +"Xả sau khi thay filament sẽ được thực hiện bên trong support của đối tượng. " +"Điều này có thể giảm lượng chất thải và giảm thời gian in. Nó sẽ không có " +"hiệu lực, trừ khi prime tower được bật." + +msgid "" +"This object will be used to purge the nozzle after a filament change to save " +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." +msgstr "" +"Đối tượng này sẽ được sử dụng để xả đầu phun sau khi thay filament để tiết " +"kiệm filament và giảm thời gian in. Màu sắc của các đối tượng sẽ được trộn " +"lẫn. Nó sẽ không có hiệu lực trừ khi prime tower được bật." + +msgid "Maximal bridging distance" +msgstr "Khoảng cách nối cầu tối đa" + +msgid "Maximal distance between supports on sparse infill sections." +msgstr "Khoảng cách tối đa giữa các support trên các phần infill thưa." + +msgid "Wipe tower purge lines spacing" +msgstr "Khoảng cách đường xả wipe tower" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "Khoảng cách của các đường xả trên wipe tower." + +msgid "Extra flow for purging" +msgstr "Lưu lượng bổ sung để xả" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"Lưu lượng bổ sung được sử dụng cho các đường xả trên wipe tower. Điều này " +"làm cho các đường xả dày hơn hoặc hẹp hơn so với bình thường. Khoảng cách " +"được điều chỉnh tự động." + +msgid "Idle temperature" +msgstr "Nhiệt độ chờ" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"Nhiệt độ đầu phun khi công cụ hiện không được sử dụng trong thiết lập đa " +"công cụ. Điều này chỉ được sử dụng khi 'Ngăn chảy nhựa' hoạt động trong Cài " +"đặt in. Đặt thành 0 để tắt." + +msgid "X-Y hole compensation" +msgstr "Bù lỗ X-Y" + +msgid "" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." +msgstr "" +"Lỗ trong đối tượng sẽ mở rộng hoặc co lại trong mặt phẳng XY theo giá trị " +"được cấu hình. Giá trị dương làm lỗ lớn hơn, giá trị âm làm lỗ nhỏ hơn. Chức " +"năng này được sử dụng để điều chỉnh kích thước một chút khi đối tượng có vấn " +"đề lắp ráp." + +msgid "X-Y contour compensation" +msgstr "Bù đường viền X-Y" + +msgid "" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." +msgstr "" +"Đường viền của đối tượng sẽ mở rộng hoặc co lại trong mặt phẳng XY theo giá " +"trị được cấu hình. Giá trị dương làm đường viền lớn hơn, giá trị âm làm " +"đường viền nhỏ hơn. Chức năng này được sử dụng để điều chỉnh kích thước một " +"chút khi đối tượng có vấn đề lắp ráp." + +msgid "Convert holes to polyholes" +msgstr "Chuyển đổi lỗ thành polyhole" + +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Tìm kiếm các lỗ gần tròn trải qua nhiều hơn một lớp và chuyển đổi hình học " +"thành polyhole. Sử dụng kích thước đầu phun và đường kính (lớn nhất) để tính " +"polyhole.\n" +"Xem http://hydraraptor.blogspot.com/2011/02/polyholes.html" + +msgid "Polyhole detection margin" +msgstr "Lề phát hiện polyhole" + +#, no-c-format, no-boost-format +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leeway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Độ lệch tối đa của một điểm so với bán kính ước tính của vòng tròn.\n" +"Vì hình trụ thường được xuất dưới dạng tam giác có kích thước khác nhau, các " +"điểm có thể không nằm trên chu vi vòng tròn. Cài đặt này cho phép bạn một " +"chút linh hoạt để mở rộng phát hiện.\n" +"Tính bằng mm hoặc % của bán kính." + +msgid "Polyhole twist" +msgstr "Xoắn polyhole" + +msgid "Rotate the polyhole every layer." +msgstr "Xoay polyhole mỗi lớp." + +msgid "G-code thumbnails" +msgstr "Hình thu nhỏ G-code" + +msgid "" +"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " +"following format: \"XxY, XxY, ...\"" +msgstr "" +"Kích thước hình ảnh được lưu trữ vào file .gcode và .sl1 / .sl1s, theo định " +"dạng sau: \"XxY, XxY, ...\"" + +msgid "Format of G-code thumbnails" +msgstr "Định dạng hình thu nhỏ G-code" + +msgid "" +"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " +"QOI for low memory firmware." +msgstr "" +"Định dạng hình thu nhỏ G-code: PNG cho chất lượng tốt nhất, JPG cho kích " +"thước nhỏ nhất, QOI cho firmware bộ nhớ thấp." + +msgid "Use relative E distances" +msgstr "Sử dụng khoảng cách E tương đối" + +msgid "" +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " +"Wipe tower is only compatible with relative mode. It is recommended on most " +"printers. Default is checked." +msgstr "" +"Đùn tương đối được khuyến nghị khi sử dụng tùy chọn \"label_objects\". Một " +"số extruder hoạt động tốt hơn khi tùy chọn này không được chọn (chế độ đùn " +"tuyệt đối). Wipe tower chỉ tương thích với chế độ tương đối. Nó được khuyến " +"nghị trên hầu hết máy in. Mặc định được chọn." + +msgid "" +"Classic wall generator produces walls with constant extrusion width and for " +"very thin areas is used gap-fill. Arachne engine produces walls with " +"variable extrusion width." +msgstr "" +"Trình tạo thành cổ điển tạo ra thành với độ rộng đùn không đổi và cho vùng " +"rất mỏng được sử dụng lấp khe. Engine Arachne tạo ra thành với độ rộng đùn " +"thay đổi." + +msgid "Arachne" +msgstr "Arachne" + +msgid "Wall transition length" +msgstr "Độ dài chuyển đổi thành" + +msgid "" +"When transitioning between different numbers of walls as the part becomes " +"thinner, a certain amount of space is allotted to split or join the wall " +"segments. It's expressed as a percentage over nozzle diameter." +msgstr "" +"Khi chuyển đổi giữa số lượng thành khác nhau khi phần trở nên mỏng hơn, một " +"lượng không gian nhất định được phân bổ để chia hoặc nối các đoạn thành. Nó " +"được biểu thị dưới dạng phần trăm trên đường kính đầu phun." + +msgid "Wall transitioning filter margin" +msgstr "Lề lọc chuyển đổi thành" + +msgid "" +"Prevent transitioning back and forth between one extra wall and one less. " +"This margin extends the range of extrusion widths which follow to [Minimum " +"wall width - margin, 2 * Minimum wall width + margin]. Increasing this " +"margin reduces the number of transitions, which reduces the number of " +"extrusion starts/stops and travel time. However, large extrusion width " +"variation can lead to under- or overextrusion problems. It's expressed as a " +"percentage over nozzle diameter." +msgstr "" +"Ngăn chuyển đổi qua lại giữa một thành bổ sung và một ít hơn. Lề này mở rộng " +"phạm vi độ rộng đùn sau đó thành [Độ rộng thành tối thiểu - lề, 2 * Độ rộng " +"thành tối thiểu + lề]. Tăng lề này giảm số lượng chuyển đổi, giảm số lần bắt " +"đầu/dừng đùn và thời gian di chuyển. Tuy nhiên, sự thay đổi độ rộng đùn lớn " +"có thể dẫn đến vấn đề đùn thiếu hoặc dư. Nó được biểu thị dưới dạng phần " +"trăm trên đường kính đầu phun." + +msgid "Wall transitioning threshold angle" +msgstr "Góc ngưỡng chuyển đổi thành" + +msgid "" +"When to create transitions between even and odd numbers of walls. A wedge " +"shape with an angle greater than this setting will not have transitions and " +"no walls will be printed in the center to fill the remaining space. Reducing " +"this setting reduces the number and length of these center walls, but may " +"leave gaps or overextrude." +msgstr "" +"Khi nào tạo chuyển đổi giữa số chẵn và lẻ của thành. Hình nêm có góc lớn " +"hơn cài đặt này sẽ không có chuyển đổi và không có thành nào được in ở trung " +"tâm để lấp không gian còn lại. Giảm cài đặt này giảm số lượng và độ dài của " +"các thành trung tâm này, nhưng có thể để lại khe hoặc đùn dư." + +msgid "Wall distribution count" +msgstr "Số phân bố thành" + +msgid "" +"The number of walls, counted from the center, over which the variation needs " +"to be spread. Lower values mean that the outer walls don't change in width." +msgstr "" +"Số lượng thành, đếm từ trung tâm, mà sự thay đổi cần được trải rộng. Giá trị " +"thấp hơn có nghĩa là thành ngoài không thay đổi độ rộng." + +msgid "Minimum feature size" +msgstr "Kích thước tính năng tối thiểu" + +msgid "" +"Minimum thickness of thin features. Model features that are thinner than " +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." +msgstr "" +"Độ dày tối thiểu của tính năng mỏng. Tính năng model mỏng hơn giá trị này sẽ " +"không được in, trong khi tính năng dày hơn giá trị này sẽ được mở rộng đến " +"độ rộng thành tối thiểu. Nó được biểu thị dưới dạng phần trăm trên đường " +"kính đầu phun." + +msgid "Minimum wall length" +msgstr "Độ dài thành tối thiểu" + +msgid "" +"Adjust this value to prevent short, unclosed walls from being printed, which " +"could increase print time. Higher values remove more and longer walls.\n" +"\n" +"NOTE: Bottom and top surfaces will not be affected by this value to prevent " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " +"Advanced settings below to adjust the sensitivity of what is considered a " +"top-surface. 'One wall threshold' is only visible if this setting is set " +"above the default value of 0.5, or if single-wall top surfaces is enabled." +msgstr "" +"Điều chỉnh giá trị này để ngăn thành ngắn, không đóng được in, có thể tăng " +"thời gian in. Giá trị cao hơn loại bỏ nhiều thành và dài hơn.\n" +"\n" +"LƯU Ý: Bề mặt dưới và trên sẽ không bị ảnh hưởng bởi giá trị này để ngăn khe " +"nhìn thấy ở bên ngoài model. Điều chỉnh 'Ngưỡng một thành' trong cài đặt " +"Nâng cao bên dưới để điều chỉnh độ nhạy của những gì được coi là bề mặt " +"trên. 'Ngưỡng một thành' chỉ hiển thị nếu cài đặt này được đặt trên giá trị " +"mặc định 0.5, hoặc nếu bề mặt trên thành đơn được bật." + +msgid "First layer minimum wall width" +msgstr "Độ rộng thành tối thiểu lớp đầu tiên" + +msgid "" +"The minimum wall width that should be used for the first layer is " +"recommended to be set to the same size as the nozzle. This adjustment is " +"expected to enhance adhesion." +msgstr "" +"Độ rộng thành tối thiểu nên được sử dụng cho lớp đầu tiên được khuyến nghị " +"đặt cùng kích thước với đầu phun. Điều chỉnh này được mong đợi để tăng cường " +"độ bám dính." + +msgid "Minimum wall width" +msgstr "Độ rộng thành tối thiểu" + +msgid "" +"Width of the wall that will replace thin features (according to the Minimum " +"feature size) of the model. If the Minimum wall width is thinner than the " +"thickness of the feature, the wall will become as thick as the feature " +"itself. It's expressed as a percentage over nozzle diameter." +msgstr "" +"Độ rộng thành sẽ thay thế tính năng mỏng (theo Kích thước tính năng tối " +"thiểu) của model. Nếu Độ rộng thành tối thiểu mỏng hơn độ dày của tính năng, " +"thành sẽ trở nên dày như tính năng đó. Nó được biểu thị dưới dạng phần trăm " +"trên đường kính đầu phun." + +msgid "Detect narrow internal solid infill" +msgstr "Phát hiện infill đặc bên trong hẹp" + +msgid "" +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." +msgstr "" +"Tùy chọn này sẽ tự động phát hiện vùng infill đặc bên trong hẹp. Nếu được " +"bật, mẫu đồng tâm sẽ được sử dụng cho vùng để tăng tốc in. Ngược lại, mẫu " +"thẳng sẽ được sử dụng theo mặc định." + +msgid "invalid value " +msgstr "giá trị không hợp lệ " + +msgid "Invalid value when spiral vase mode is enabled: " +msgstr "Giá trị không hợp lệ khi chế độ bình xoắn ốc được bật: " + +msgid "too large line width " +msgstr "độ rộng đường quá lớn " + +msgid " not in range " +msgstr " không trong phạm vi " + +msgid "Export 3MF" +msgstr "Xuất 3MF" + +msgid "Export project as 3MF." +msgstr "Xuất dự án dưới dạng 3MF." + +msgid "Export slicing data" +msgstr "Xuất dữ liệu slice" + +msgid "Export slicing data to a folder." +msgstr "Xuất dữ liệu slice vào thư mục." + +msgid "Load slicing data" +msgstr "Nạp dữ liệu slice" + +msgid "Load cached slicing data from directory." +msgstr "Nạp dữ liệu slice đã lưu từ thư mục." + +msgid "Export STL" +msgstr "Xuất STL" + +msgid "Export the objects as single STL." +msgstr "Xuất các đối tượng dưới dạng STL đơn." + +msgid "Export multiple STLs" +msgstr "Xuất nhiều STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "Xuất các đối tượng dưới dạng nhiều STL vào thư mục." + +msgid "Slice" +msgstr "Slice" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "Slice các bản: 0-tất cả bản, i-bản i, khác-không hợp lệ" + +msgid "Show command help." +msgstr "Hiển thị trợ giúp lệnh." + +msgid "UpToDate" +msgstr "Cập nhật" + +msgid "Update the config values of 3MF to latest." +msgstr "Cập nhật giá trị cấu hình của 3MF lên mới nhất." + +msgid "downward machines check" +msgstr "kiểm tra máy tương thích ngược" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" +"kiểm tra máy hiện tại có tương thích ngược với các máy trong danh sách hay " +"không." + +msgid "Load default filaments" +msgstr "Nạp filament mặc định" + +msgid "Load first filament as default for those not loaded." +msgstr "Nạp filament đầu tiên làm mặc định cho những cái chưa được nạp." + +msgid "Minimum save" +msgstr "Lưu tối thiểu" + +msgid "Export 3MF with minimum size." +msgstr "xuất 3MF với kích thước tối thiểu." + +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "số lượng tam giác tối đa trên mỗi bản để slice." + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "thời gian slice tối đa trên mỗi bản tính bằng giây." + +msgid "No check" +msgstr "Không kiểm tra" + +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "" +"Không chạy bất kỳ kiểm tra tính hợp lệ nào, chẳng hạn như kiểm tra xung đột " +"đường dẫn G-code." + +msgid "Normative check" +msgstr "Kiểm tra quy chuẩn" + +msgid "Check the normative items." +msgstr "Kiểm tra các mục quy chuẩn." + +msgid "Output Model Info" +msgstr "Xuất thông tin model" + +msgid "Output the model's information." +msgstr "Xuất thông tin của model." + +msgid "Export Settings" +msgstr "Xuất cài đặt" + +msgid "Export settings to a file." +msgstr "Xuất cài đặt vào file." + +msgid "Send progress to pipe" +msgstr "Gửi tiến trình đến pipe" + +msgid "Send progress to pipe." +msgstr "Gửi tiến trình đến pipe." + +msgid "Arrange Options" +msgstr "Tùy chọn sắp xếp" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "Tùy chọn sắp xếp: 0-tắt, 1-bật, khác-tự động" + +msgid "Repetition count" +msgstr "Số lần lặp lại" + +msgid "Repetition count of the whole model." +msgstr "Số lần lặp lại của toàn bộ model." + +msgid "Ensure on bed" +msgstr "Đảm bảo trên bàn" + +msgid "" +"Lift the object above the bed when it is partially below. Disabled by " +"default." +msgstr "" +"Nâng đối tượng lên trên bàn khi nó một phần ở dưới. Bị tắt theo mặc định." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Sắp xếp các model được cung cấp trong một bản và hợp nhất chúng trong một " +"model duy nhất để thực hiện hành động một lần." + +msgid "Convert Unit" +msgstr "Chuyển đổi đơn vị" + +msgid "Convert the units of model." +msgstr "Chuyển đổi đơn vị của model." + +msgid "Orient Options" +msgstr "Tùy chọn định hướng" + +msgid "Orient options: 0-disable, 1-enable, others-auto" +msgstr "Tùy chọn định hướng: 0-tắt, 1-bật, khác-tự động" + +msgid "Rotation angle around the Z axis in degrees." +msgstr "Góc xoay xung quanh trục Z tính bằng độ." + +msgid "Rotate around X" +msgstr "Xoay xung quanh X" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Góc xoay xung quanh trục X tính bằng độ." + +msgid "Rotate around Y" +msgstr "Xoay xung quanh Y" + +msgid "Rotation angle around the Y axis in degrees." +msgstr "Góc xoay xung quanh trục Y tính bằng độ." + +msgid "Scale the model by a float factor." +msgstr "Tỷ lệ model theo hệ số số thực." + +msgid "Load General Settings" +msgstr "Nạp cài đặt chung" + +msgid "Load process/machine settings from the specified file." +msgstr "Nạp cài đặt quy trình/máy từ file được chỉ định." + +msgid "Load Filament Settings" +msgstr "Nạp cài đặt filament" + +msgid "Load filament settings from the specified file list." +msgstr "Nạp cài đặt filament từ danh sách file được chỉ định." + +msgid "Skip Objects" +msgstr "Bỏ qua đối tượng" + +msgid "Skip some objects in this print." +msgstr "Bỏ qua một số đối tượng trong bản in này." + +msgid "Clone Objects" +msgstr "Sao chép đối tượng" + +msgid "Clone objects in the load list." +msgstr "Sao chép đối tượng trong danh sách nạp." + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "Nạp cài đặt quy trình/máy cập nhật khi sử dụng cập nhật" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "" +"Nạp cài đặt quy trình/máy cập nhật từ file được chỉ định khi sử dụng cập " +"nhật." + +msgid "Load uptodate filament settings when using uptodate" +msgstr "Nạp cài đặt filament cập nhật khi sử dụng cập nhật" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" +"Nạp cài đặt filament cập nhật từ file được chỉ định khi sử dụng cập nhật." + +msgid "Downward machines check" +msgstr "Kiểm tra máy tương thích ngược" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" +"Nếu được bật, kiểm tra máy hiện tại có tương thích ngược với các máy trong " +"danh sách hay không." + +msgid "downward machines settings" +msgstr "cài đặt máy tương thích ngược" + +msgid "The machine settings list needs to do downward checking." +msgstr "Danh sách cài đặt máy cần thực hiện kiểm tra tương thích ngược." + +msgid "Load assemble list" +msgstr "Nạp danh sách lắp ráp" + +msgid "Load assemble object list from config file." +msgstr "Nạp danh sách đối tượng lắp ráp từ file cấu hình." + +msgid "Data directory" +msgstr "Thư mục dữ liệu" + +msgid "" +"Load and store settings at the given directory. This is useful for " +"maintaining different profiles or including configurations from a network " +"storage." +msgstr "" +"Nạp và lưu trữ cài đặt tại thư mục đã cho. Điều này hữu ích để duy trì các " +"hồ sơ khác nhau hoặc bao gồm cấu hình từ bộ nhớ mạng." + +msgid "Output directory" +msgstr "Thư mục đầu ra" + +msgid "Output directory for the exported files." +msgstr "Thư mục đầu ra cho các file được xuất." + +msgid "Debug level" +msgstr "Mức gỡ lỗi" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"Đặt mức ghi log gỡ lỗi. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" + +msgid "Enable timelapse for print" +msgstr "Bật timelapse cho in" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "Nếu được bật, slice này sẽ được coi là sử dụng timelapse." + +msgid "Load custom G-code" +msgstr "Nạp G-code tùy chỉnh" + +msgid "Load custom G-code from json." +msgstr "Nạp G-code tùy chỉnh từ json." + +msgid "Load filament IDs" +msgstr "Nạp ID filament" + +msgid "Load filament IDs for each object." +msgstr "Nạp ID filament cho mỗi đối tượng." + +msgid "Allow multiple colors on one plate" +msgstr "Cho phép nhiều màu trên một bản" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "Nếu được bật, Sắp xếp sẽ cho phép nhiều màu trên một bản." + +msgid "Allow rotation when arranging" +msgstr "Cho phép xoay khi sắp xếp" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "Nếu được bật, Sắp xếp sẽ cho phép xoay khi đặt đối tượng." + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "Tránh vùng hiệu chỉnh đùn khi sắp xếp" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "Nếu được bật, Sắp xếp sẽ tránh vùng hiệu chỉnh đùn khi đặt đối tượng." + +msgid "Skip modified G-code in 3MF" +msgstr "Bỏ qua G-code đã sửa đổi trong 3MF" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "" +"Bỏ qua G-code đã sửa đổi trong 3MF từ Máy in hoặc cài đặt sẵn filament." + +msgid "MakerLab name" +msgstr "Tên MakerLab" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "Tên MakerLab để tạo 3MF này." + +msgid "MakerLab version" +msgstr "Phiên bản MakerLab" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "Phiên bản MakerLab để tạo 3MF này." + +msgid "Metadata name list" +msgstr "Danh sách tên metadata" + +#, fuzzy +msgid "Metadata name list added into 3MF." +msgstr "Danh sách tên metadata được thêm vào 3MF." + +msgid "Metadata value list" +msgstr "Danh sách giá trị metadata" + +#, fuzzy +msgid "Metadata value list added into 3MF." +msgstr "Danh sách giá trị metadata được thêm vào 3MF." + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced" +msgstr "Cho phép 3MF với phiên bản mới hơn được slice" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced." +msgstr "Cho phép 3MF với phiên bản mới hơn được slice." + +msgid "Current Z-hop" +msgstr "Z-hop hiện tại" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "Chứa Z-hop có ở đầu khối G-code tùy chỉnh." + +msgid "" +"Position of the extruder at the beginning of the custom G-code block. If the " +"custom G-code travels somewhere else, it should write to this variable so " +"Snapmaker Orca knows where it travels from when it gets control back." +msgstr "" +"Vị trí của extruder ở đầu khối G-code tùy chỉnh. Nếu G-code tùy chỉnh di " +"chuyển đến nơi khác, nó nên ghi vào biến này để Snapmaker Orca biết nó di chuyển " +"từ đâu khi nó lấy lại quyền điều khiển." + +msgid "" +"Retraction state at the beginning of the custom G-code block. If the custom " +"G-code moves the extruder axis, it should write to this variable so " +"Snapmaker Orca de-retracts correctly when it gets control back." +msgstr "" +"Trạng thái rút ở đầu khối G-code tùy chỉnh. Nếu G-code tùy chỉnh di chuyển " +"trục extruder, nó nên ghi vào biến này để Snapmaker Orca bỏ rút chính xác khi nó " +"lấy lại quyền điều khiển." + +msgid "Extra de-retraction" +msgstr "Bỏ rút bổ sung" + +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "Nạp extruder bổ sung hiện được lên kế hoạch sau khi bỏ rút." + +msgid "Absolute E position" +msgstr "Vị trí E tuyệt đối" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "" +"Vị trí hiện tại của trục extruder. Chỉ được sử dụng với địa chỉ extruder " +"tuyệt đối." + +msgid "Current extruder" +msgstr "Extruder hiện tại" + +msgid "Zero-based index of currently used extruder." +msgstr "Chỉ số dựa trên không của extruder hiện được sử dụng." + +msgid "Current object index" +msgstr "Chỉ số đối tượng hiện tại" + +msgid "" +"Specific for sequential printing. Zero-based index of currently printed " +"object." +msgstr "" +"Cụ thể cho in tuần tự. Chỉ số dựa trên không của đối tượng hiện được in." + +msgid "Has wipe tower" +msgstr "Có wipe tower" + +msgid "Whether or not wipe tower is being generated in the print." +msgstr "Có hay không wipe tower đang được tạo trong bản in." + +msgid "Initial extruder" +msgstr "Extruder đầu tiên" + +msgid "" +"Zero-based index of the first extruder used in the print. Same as " +"initial_tool." +msgstr "" +"Chỉ số dựa trên không của extruder đầu tiên được sử dụng trong bản in. Giống " +"như initial_tool." + +msgid "Initial tool" +msgstr "Công cụ đầu tiên" + +msgid "" +"Zero-based index of the first extruder used in the print. Same as " +"initial_extruder." +msgstr "" +"Chỉ số dựa trên không của extruder đầu tiên được sử dụng trong bản in. Giống " +"như initial_extruder." + +msgid "Is extruder used?" +msgstr "Extruder có được sử dụng không?" + +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "" +"Vector của các boolean cho biết extruder đã cho có được sử dụng trong bản in " +"hay không." + +msgid "Has single extruder MM priming" +msgstr "Có nạp MM extruder đơn" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "" +"Các vùng nạp đa vật liệu bổ sung có được sử dụng trong bản in này không?" + +msgid "Volume per extruder" +msgstr "Khối lượng trên mỗi extruder" + +msgid "Total filament volume extruded per extruder during the entire print." +msgstr "" +"Tổng khối lượng filament được đùn trên mỗi extruder trong toàn bộ bản in." + +msgid "Total tool changes" +msgstr "Tổng số lần thay công cụ" + +msgid "Number of tool changes during the print." +msgstr "Số lần thay công cụ trong bản in." + +msgid "Total volume" +msgstr "Tổng khối lượng" + +msgid "Total volume of filament used during the entire print." +msgstr "Tổng khối lượng filament được sử dụng trong toàn bộ bản in." + +msgid "Weight per extruder" +msgstr "Trọng lượng trên mỗi extruder" + +msgid "" +"Weight per extruder extruded during the entire print. Calculated from " +"filament_density value in Filament Settings." +msgstr "" +"Trọng lượng trên mỗi extruder được đùn trong toàn bộ bản in. Được tính từ " +"giá trị filament_density trong Cài đặt filament." + +msgid "Total weight" +msgstr "Tổng trọng lượng" + +msgid "" +"Total weight of the print. Calculated from filament_density value in " +"Filament Settings." +msgstr "" +"Tổng trọng lượng của bản in. Được tính từ giá trị filament_density trong Cài " +"đặt filament." + +msgid "Total layer count" +msgstr "Tổng số lớp" + +msgid "Number of layers in the entire print." +msgstr "Số lượng lớp trong toàn bộ bản in." + +msgid "Number of objects" +msgstr "Số lượng đối tượng" + +msgid "Total number of objects in the print." +msgstr "Tổng số đối tượng trong bản in." + +msgid "Number of instances" +msgstr "Số lượng thể hiện" + +msgid "Total number of object instances in the print, summed over all objects." +msgstr "" +"Tổng số thể hiện đối tượng trong bản in, tổng hợp trên tất cả đối tượng." + +msgid "Scale per object" +msgstr "Tỷ lệ trên mỗi đối tượng" + +msgid "" +"Contains a string with the information about what scaling was applied to the " +"individual objects. Indexing of the objects is zero-based (first object has " +"index 0).\n" +"Example: 'x:100% y:50% z:100%'." +msgstr "" +"Chứa chuỗi với thông tin về tỷ lệ nào đã được áp dụng cho các đối tượng " +"riêng lẻ. Lập chỉ mục của các đối tượng dựa trên không (đối tượng đầu tiên " +"có chỉ số 0).\n" +"Ví dụ: 'x:100% y:50% z:100%'." + +msgid "Input filename without extension" +msgstr "Tên file đầu vào không có phần mở rộng" + +msgid "Source filename of the first object, without extension." +msgstr "Tên file nguồn của đối tượng đầu tiên, không có phần mở rộng." + +#, fuzzy +msgid "" +"The vector has two elements: X and Y coordinate of the point. Values in mm." +msgstr "Vector có hai phần tử: tọa độ x và y của điểm. Giá trị tính bằng mm." + +#, fuzzy +msgid "" +"The vector has two elements: X and Y dimension of the bounding box. Values " +"in mm." +msgstr "" +"Vector có hai phần tử: kích thước x và y của hộp giới hạn. Giá trị tính bằng " +"mm." + +msgid "First layer convex hull" +msgstr "Bao lồi lớp đầu tiên" + +msgid "" +"Vector of points of the first layer convex hull. Each element has the " +"following format:'[x, y]' (x and y are floating-point numbers in mm)." +msgstr "" +"Vector các điểm của bao lồi lớp đầu tiên. Mỗi phần tử có định dạng sau:'[x, " +"y]' (x và y là số dấu phẩy động tính bằng mm)." + +msgid "Bottom-left corner of first layer bounding box" +msgstr "Góc dưới-trái của hộp giới hạn lớp đầu tiên" + +msgid "Top-right corner of first layer bounding box" +msgstr "Góc trên-phải của hộp giới hạn lớp đầu tiên" + +msgid "Size of the first layer bounding box" +msgstr "Kích thước của hộp giới hạn lớp đầu tiên" + +msgid "Bottom-left corner of print bed bounding box" +msgstr "Góc dưới-trái của hộp giới hạn bàn in" + +msgid "Top-right corner of print bed bounding box" +msgstr "Góc trên-phải của hộp giới hạn bàn in" + +msgid "Size of the print bed bounding box" +msgstr "Kích thước của hộp giới hạn bàn in" + +msgid "Timestamp" +msgstr "Dấu thời gian" + +msgid "String containing current time in yyyyMMdd-hhmmss format." +msgstr "Chuỗi chứa thời gian hiện tại theo định dạng yyyyMMdd-hhmmss." + +msgid "Day" +msgstr "Ngày" + +msgid "Hour" +msgstr "Giờ" + +msgid "Minute" +msgstr "Phút" + +msgid "Second" +msgstr "Giây" + +msgid "Print preset name" +msgstr "Tên cài đặt sẵn in" + +msgid "Name of the print preset used for slicing." +msgstr "Tên của cài đặt sẵn in được sử dụng để slice." + +msgid "Filament preset name" +msgstr "Tên cài đặt sẵn filament" + +msgid "" +"Names of the filament presets used for slicing. The variable is a vector " +"containing one name for each extruder." +msgstr "" +"Tên của các cài đặt sẵn filament được sử dụng để slice. Biến là một vector " +"chứa một tên cho mỗi extruder." + +msgid "Printer preset name" +msgstr "Tên cài đặt sẵn máy in" + +msgid "Name of the printer preset used for slicing." +msgstr "Tên của cài đặt sẵn máy in được sử dụng để slice." + +msgid "Physical printer name" +msgstr "Tên máy in vật lý" + +msgid "Name of the physical printer used for slicing." +msgstr "Tên của máy in vật lý được sử dụng để slice." + +msgid "Number of extruders" +msgstr "Số lượng extruder" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" +"Tổng số extruder, bất kể chúng có được sử dụng trong bản in hiện tại hay " +"không." + +msgid "Layer number" +msgstr "Số lớp" + +msgid "Index of the current layer. One-based (i.e. first layer is number 1)." +msgstr "Chỉ số của lớp hiện tại. Dựa trên một (tức là lớp đầu tiên là số 1)." + +msgid "Layer Z" +msgstr "Lớp Z" + +msgid "" +"Height of the current layer above the print bed, measured to the top of the " +"layer." +msgstr "Chiều cao của lớp hiện tại phía trên bàn in, đo đến đỉnh của lớp." + +msgid "Maximal layer Z" +msgstr "Lớp Z tối đa" + +msgid "Height of the last layer above the print bed." +msgstr "Chiều cao của lớp cuối cùng phía trên bàn in." + +msgid "Filament extruder ID" +msgstr "ID extruder filament" + +msgid "The current extruder ID. The same as current_extruder." +msgstr "ID extruder hiện tại. Giống như current_extruder." + +msgid "Error in zip archive" +msgstr "Lỗi trong file nén zip" + +msgid "Generating walls" +msgstr "Đang tạo thành" + +msgid "Generating infill regions" +msgstr "Đang tạo vùng infill" + +msgid "Generating infill toolpath" +msgstr "Đang tạo đường dẫn công cụ infill" + +msgid "Detect overhangs for auto-lift" +msgstr "Phát hiện phần nhô để tự động nâng" + +msgid "Checking support necessity" +msgstr "Đang kiểm tra cần thiết support" + +msgid "floating regions" +msgstr "vùng nổi" + +msgid "floating cantilever" +msgstr "công xôn nổi" + +msgid "large overhangs" +msgstr "phần nhô lớn" + +#, c-format, boost-format +msgid "" +"It seems object %s has %s. Please re-orient the object or enable support " +"generation." +msgstr "" +"Có vẻ đối tượng %s có %s. Vui lòng định hướng lại đối tượng hoặc bật tạo " +"support." + +msgid "Generating support" +msgstr "Đang tạo support" + +msgid "Optimizing toolpath" +msgstr "Đang tối ưu hóa đường dẫn công cụ" + +msgid "Slicing mesh" +msgstr "Đang slice mesh" + +msgid "" +"No layers were detected. You might want to repair your STL file(s) or check " +"their size or thickness and retry.\n" +msgstr "" +"Không phát hiện lớp nào. Bạn có thể muốn sửa chữa file STL của mình hoặc " +"kiểm tra kích thước hoặc độ dày của chúng và thử lại.\n" + +msgid "" +"An object's XY size compensation will not be used because it is also color-" +"painted.\n" +"XY Size compensation cannot be combined with color-painting." +msgstr "" +"Bù kích thước XY của đối tượng sẽ không được sử dụng vì nó cũng được tô " +"màu .\n" +"Bù kích thước XY không thể kết hợp với tô màu." + +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" +"Một đối tượng đã bật bù kích thước XY sẽ không được sử dụng vì nó cũng được " +"vẽ fuzzy skin.\n" +"Bù kích thước XY không thể kết hợp với vẽ fuzzy skin." + +msgid "Object name" +msgstr "Tên đối tượng" + +msgid "Support: generate contact points" +msgstr "Support: tạo điểm tiếp xúc" + +msgid "Loading of a model file failed." +msgstr "Nạp file model thất bại." + +msgid "Meshing of a model file failed or no valid shape." +msgstr "" + +msgid "The supplied file couldn't be read because it's empty" +msgstr "File được cung cấp không thể đọc được vì nó trống" + +msgid "" +"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." +msgstr "" +"Định dạng file không xác định. File đầu vào phải có phần mở rộng .stl, ." +"obj, .amf(.xml)." + +msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." +msgstr "" +"Định dạng file không xác định. File đầu vào phải có phần mở rộng .3mf hoặc ." +"zip.amf." + +msgid "load_obj: failed to parse" +msgstr "load_obj: phân tích thất bại" + +msgid "load mtl in obj: failed to parse" +msgstr "load mtl trong obj: phân tích thất bại" + +msgid "The file contains polygons with more than 4 vertices." +msgstr "File chứa đa giác có nhiều hơn 4 đỉnh." + +msgid "The file contains polygons with less than 2 vertices." +msgstr "File chứa đa giác có ít hơn 2 đỉnh." + +msgid "The file contains invalid vertex index." +msgstr "File chứa chỉ số đỉnh không hợp lệ." + +msgid "This OBJ file couldn't be read because it's empty." +msgstr "File OBJ này không thể đọc được vì nó trống." + +msgid "Flow Rate Calibration" +msgstr "Hiệu chỉnh tốc độ lưu lượng" + +msgid "Max Volumetric Speed Calibration" +msgstr "Hiệu chỉnh tốc độ thể tích tối đa" + +msgid "Manage Result" +msgstr "Quản lý kết quả" + +msgid "Manual Calibration" +msgstr "Hiệu chỉnh thủ công" + +msgid "Result can be read by human eyes." +msgstr "Kết quả có thể được đọc bằng mắt người." + +msgid "Auto-Calibration" +msgstr "Tự động hiệu chỉnh" + +msgid "We would use Lidar to read the calibration result" +msgstr "Chúng tôi sẽ sử dụng Lidar để đọc kết quả hiệu chỉnh" + +msgid "Prev" +msgstr "Trước" + +msgid "Recalibration" +msgstr "Hiệu chỉnh lại" + +msgid "Calibrate" +msgstr "Hiệu chỉnh" + +msgid "Finish" +msgstr "Hoàn thành" + +msgid "How to use calibration result?" +msgstr "Cách sử dụng kết quả hiệu chỉnh?" + +msgid "" +"You could change the Flow Dynamics Calibration Factor in material editing" +msgstr "" +"Bạn có thể thay đổi Hệ số hiệu chỉnh động lực lưu lượng trong chỉnh sửa vật " +"liệu" + +msgid "" +"The current firmware version of the printer does not support calibration.\n" +"Please upgrade the printer firmware." +msgstr "" +"Phiên bản firmware hiện tại của máy in không hỗ trợ hiệu chỉnh.\n" +"Vui lòng nâng cấp firmware máy in." + +msgid "Calibration not supported" +msgstr "Hiệu chỉnh không được hỗ trợ" + +msgid "Error desc" +msgstr "Mô tả lỗi" + +msgid "Extra info" +msgstr "Thông tin bổ sung" + +msgid "Flow Dynamics" +msgstr "Động lực lưu lượng" + +msgid "Flow Rate" +msgstr "Tốc độ lưu lượng" + +msgid "Max Volumetric Speed" +msgstr "Tốc độ thể tích tối đa" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"Start value: >= %.1f\n" +"End value: <= %.1f\n" +"End value: > Start value\n" +"Value step: >= %.3f" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"Giá trị bắt đầu: >= %.1f\n" +"Giá trị kết thúc: <= %.1f\n" +"Giá trị kết thúc: > Giá trị bắt đầu\n" +"Bước giá trị: >= %.3f" + +msgid "The name cannot be empty." +msgstr "Tên không thể để trống." + +#, c-format, boost-format +msgid "The selected preset: %s was not found." +msgstr "Cài đặt sẵn đã chọn: %s không tìm thấy." + +msgid "The name cannot be the same as the system preset name." +msgstr "Tên không thể giống với tên cài đặt sẵn hệ thống." + +msgid "The name is the same as another existing preset name" +msgstr "Tên giống với tên cài đặt sẵn khác hiện có" + +msgid "create new preset failed." +msgstr "tạo cài đặt sẵn mới thất bại." + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + +msgid "" +"Are you sure to cancel the current calibration and return to the home page?" +msgstr "Bạn có chắc chắn hủy hiệu chỉnh hiện tại và quay về trang chủ không?" + +msgid "No Printer Connected!" +msgstr "Không có máy in được kết nối!" + +msgid "Printer is not connected yet." +msgstr "Máy in chưa được kết nối." + +msgid "Please select filament to calibrate." +msgstr "Vui lòng chọn filament để hiệu chỉnh." + +msgid "The input value size must be 3." +msgstr "Kích thước giá trị đầu vào phải là 3." + +msgid "" +"This machine type can only hold 16 history results per nozzle. You can " +"delete the existing historical results and then start calibration. Or you " +"can continue the calibration, but you cannot create new calibration " +"historical results.\n" +"Do you still want to continue the calibration?" +msgstr "" +"Loại máy này chỉ có thể giữ 16 kết quả lịch sử trên mỗi đầu phun. Bạn có thể " +"xóa kết quả lịch sử hiện có và sau đó bắt đầu hiệu chỉnh. Hoặc bạn có thể " +"tiếp tục hiệu chỉnh, nhưng bạn không thể tạo kết quả lịch sử hiệu chỉnh " +"mới.\n" +"Bạn vẫn muốn tiếp tục hiệu chỉnh không?" + +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" + +#, c-format, boost-format +msgid "" +"There is already a historical calibration result with the same name: %s. " +"Only one of the results with the same name is saved. Are you sure you want " +"to override the historical result?" +msgstr "" +"Đã có kết quả hiệu chỉnh lịch sử với cùng tên: %s. Chỉ một trong các kết quả " +"có cùng tên được lưu. Bạn có chắc chắn muốn ghi đè kết quả lịch sử không?" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + +#, c-format, boost-format +msgid "" +"This machine type can only hold %d history results per nozzle. This result " +"will not be saved." +msgstr "" +"Loại máy này chỉ có thể giữ %d kết quả lịch sử trên mỗi đầu phun. Kết quả " +"này sẽ không được lưu." + +msgid "Connecting to printer..." +msgstr "Đang kết nối với máy in..." + +msgid "The failed test result has been dropped." +msgstr "Kết quả kiểm tra thất bại đã bị bỏ." + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "Kết quả hiệu chỉnh động lực lưu lượng đã được lưu vào máy in." + +msgid "Internal Error" +msgstr "Lỗi nội bộ" + +msgid "Please select at least one filament for calibration" +msgstr "Vui lòng chọn ít nhất một filament để hiệu chỉnh" + +msgid "Flow rate calibration result has been saved to preset." +msgstr "Kết quả hiệu chỉnh tốc độ lưu lượng đã được lưu vào cài đặt sẵn." + +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "Kết quả hiệu chỉnh tốc độ thể tích tối đa đã được lưu vào cài đặt sẵn." + +msgid "When do you need Flow Dynamics Calibration" +msgstr "Khi nào bạn cần hiệu chỉnh động lực lưu lượng" + +msgid "" +"We now have added the auto-calibration for different filaments, which is " +"fully automated and the result will be saved into the printer for future " +"use. You only need to do the calibration in the following limited cases:\n" +"1. If you introduce a new filament of different brands/models or the " +"filament is damp;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" +"3. If the max volumetric speed or print temperature is changed in the " +"filament setting." +msgstr "" +"Chúng tôi hiện đã thêm tự động hiệu chỉnh cho các filament khác nhau, hoàn " +"toàn tự động và kết quả sẽ được lưu vào máy in để sử dụng trong tương lai. " +"Bạn chỉ cần thực hiện hiệu chỉnh trong các trường hợp giới hạn sau:\n" +"1. Nếu bạn giới thiệu filament mới của thương hiệu/model khác nhau hoặc " +"filament bị ẩm;\n" +"2. Nếu đầu phun bị mòn hoặc được thay thế bằng đầu mới;\n" +"3. Nếu tốc độ thể tích tối đa hoặc nhiệt độ in được thay đổi trong cài đặt " +"filament." + +msgid "About this calibration" +msgstr "Về hiệu chỉnh này" + +msgid "" +"Please find the details of Flow Dynamics Calibration from our wiki.\n" +"\n" +"Usually the calibration is unnecessary. When you start a single color/" +"material print, with the \"flow dynamics calibration\" option checked in the " +"print start menu, the printer will follow the old way, calibrate the " +"filament before the print; When you start a multi color/material print, the " +"printer will use the default compensation parameter for the filament during " +"every filament switch which will have a good result in most cases.\n" +"\n" +"Please note that there are a few cases that can make the calibration results " +"unreliable, such as insufficient adhesion on the build plate. Improving " +"adhesion can be achieved by washing the build plate or applying glue. For " +"more information on this topic, please refer to our Wiki.\n" +"\n" +"The calibration results have about 10 percent jitter in our test, which may " +"cause the result not exactly the same in each calibration. We are still " +"investigating the root cause to do improvements with new updates." +msgstr "" +"Vui lòng tìm chi tiết về hiệu chỉnh động lực lưu lượng từ wiki của chúng " +"tôi.\n" +"\n" +"Thông thường hiệu chỉnh là không cần thiết. Khi bạn bắt đầu in một màu/vật " +"liệu đơn, với tùy chọn \"hiệu chỉnh động lực lưu lượng\" được chọn trong " +"menu bắt đầu in, máy in sẽ theo cách cũ, hiệu chỉnh filament trước khi in; " +"Khi bạn bắt đầu in nhiều màu/vật liệu, máy in sẽ sử dụng tham số bù mặc định " +"cho filament trong mỗi lần chuyển filament sẽ có kết quả tốt trong hầu hết " +"các trường hợp.\n" +"\n" +"Lưu ý rằng có một vài trường hợp có thể làm cho kết quả hiệu chỉnh không " +"đáng tin cậy, chẳng hạn như độ bám dính không đủ trên bàn in. Cải thiện độ " +"bám dính có thể đạt được bằng cách rửa bàn in hoặc bôi keo. Để biết thêm " +"thông tin về chủ đề này, vui lòng tham khảo Wiki của chúng tôi.\n" +"\n" +"Kết quả hiệu chỉnh có khoảng 10 phần trăm rung trong kiểm tra của chúng tôi, " +"có thể làm cho kết quả không hoàn toàn giống nhau trong mỗi lần hiệu chỉnh. " +"Chúng tôi vẫn đang điều tra nguyên nhân gốc rễ để cải tiến với các cập nhật " +"mới." + +msgid "When to use Flow Rate Calibration" +msgstr "Khi nào sử dụng hiệu chỉnh tốc độ lưu lượng" + +msgid "" +"After using Flow Dynamics Calibration, there might still be some extrusion " +"issues, such as:\n" +"1. Over-Extrusion: Excess material on your printed object, forming blobs or " +"zits, or the layers seem thicker than expected and not uniform\n" +"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" +"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " +"they should be" +msgstr "" +"Sau khi sử dụng hiệu chỉnh động lực lưu lượng, vẫn có thể có một số vấn đề " +"đùn, chẳng hạn như:\n" +"1. Đùn dư: Vật liệu dư thừa trên đối tượng in của bạn, tạo thành cục hoặc " +"mụn, hoặc các lớp có vẻ dày hơn dự kiến và không đồng đều\n" +"2. Đùn thiếu: Các lớp rất mỏng, độ bền infill yếu hoặc có khe trong lớp trên " +"của model, ngay cả khi in chậm\n" +"3. Chất lượng bề mặt kém: Bề mặt bản in của bạn có vẻ thô hoặc không đều\n" +"4. Tính toàn vẹn cấu trúc yếu: Bản in dễ vỡ hoặc có vẻ không chắc chắn như " +"chúng nên có" + +msgid "" +"In addition, Flow Rate Calibration is crucial for foaming materials like LW-" +"PLA used in RC planes. These materials expand greatly when heated, and " +"calibration provides a useful reference flow rate." +msgstr "" +"Ngoài ra, hiệu chỉnh tốc độ lưu lượng rất quan trọng đối với vật liệu tạo " +"bọt như LW-PLA được sử dụng trong máy bay RC. Các vật liệu này mở rộng rất " +"nhiều khi được đun nóng, và hiệu chỉnh cung cấp tốc độ lưu lượng tham chiếu " +"hữu ích." + +msgid "" +"Flow Rate Calibration measures the ratio of expected to actual extrusion " +"volumes. The default setting works well in Bambu Lab printers and official " +"filaments as they were pre-calibrated and fine-tuned. For a regular " +"filament, you usually won't need to perform a Flow Rate Calibration unless " +"you still see the listed defects after you have done other calibrations. For " +"more details, please check out the wiki article." +msgstr "" +"Hiệu chỉnh tốc độ lưu lượng đo tỷ lệ khối lượng đùn dự kiến so với thực tế . " +"Cài đặt mặc định hoạt động tốt trong máy in Bambu Lab và filament chính thức " +"vì chúng đã được hiệu chỉnh trước và tinh chỉnh. Đối với filament thông " +"thường, bạn thường sẽ không cần thực hiện hiệu chỉnh tốc độ lưu lượng trừ " +"khi bạn vẫn thấy các khuyết điểm được liệt kê sau khi bạn đã thực hiện hiệu " +"chỉnh khác. Để biết thêm chi tiết, vui lòng xem bài viết wiki." + +msgid "" +"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " +"directly measuring the calibration patterns. However, please be advised that " +"the efficacy and accuracy of this method may be compromised with specific " +"types of materials. Particularly, filaments that are transparent or semi-" +"transparent, sparkling-particled, or have a high-reflective finish may not " +"be suitable for this calibration and can produce less-than-desirable " +"results.\n" +"\n" +"The calibration results may vary between each calibration or filament. We " +"are still improving the accuracy and compatibility of this calibration " +"through firmware updates over time.\n" +"\n" +"Caution: Flow Rate Calibration is an advanced process, to be attempted only " +"by those who fully understand its purpose and implications. Incorrect usage " +"can lead to sub-par prints or printer damage. Please make sure to carefully " +"read and understand the process before doing it." +msgstr "" +"Tự động hiệu chỉnh tốc độ lưu lượng sử dụng công nghệ Micro-Lidar của Bambu " +"Lab, đo trực tiếp các mẫu hiệu chỉnh. Tuy nhiên, lưu ý rằng hiệu quả và độ " +"chính xác của phương pháp này có thể bị ảnh hưởng với các loại vật liệu cụ " +"thể. Đặc biệt, filament trong suốt hoặc bán trong suốt, có hạt lấp lánh, " +"hoặc có bề mặt phản chiếu cao có thể không phù hợp cho hiệu chỉnh này và có " +"thể tạo ra kết quả kém mong muốn.\n" +"\n" +"Kết quả hiệu chỉnh có thể thay đổi giữa mỗi lần hiệu chỉnh hoặc filament. " +"Chúng tôi vẫn đang cải thiện độ chính xác và khả năng tương thích của hiệu " +"chỉnh này thông qua cập nhật firmware theo thời gian.\n" +"\n" +"Cảnh báo: Hiệu chỉnh tốc độ lưu lượng là quy trình nâng cao, chỉ được thử " +"bởi những người hiểu đầy đủ mục đích và hàm ý của nó. Sử dụng không đúng có " +"thể dẫn đến bản in kém hoặc hư hỏng máy in. Vui lòng đảm bảo đọc kỹ và hiểu " +"quy trình trước khi thực hiện." + +msgid "When you need Max Volumetric Speed Calibration" +msgstr "Khi bạn cần hiệu chỉnh tốc độ thể tích tối đa" + +msgid "Over-extrusion or under extrusion" +msgstr "Đùn dư hoặc đùn thiếu" + +msgid "Max Volumetric Speed calibration is recommended when you print with:" +msgstr "Hiệu chỉnh tốc độ thể tích tối đa được khuyến nghị khi bạn in với:" + +msgid "material with significant thermal shrinkage/expansion, such as..." +msgstr "vật liệu có co ngót/giãn nở nhiệt đáng kể, chẳng hạn như..." + +msgid "materials with inaccurate filament diameter" +msgstr "vật liệu có đường kính filament không chính xác" + +msgid "We found the best Flow Dynamics Calibration Factor" +msgstr "Chúng tôi đã tìm thấy hệ số hiệu chỉnh động lực lưu lượng tốt nhất" + +msgid "" +"Part of the calibration failed! You may clean the plate and retry. The " +"failed test result would be dropped." +msgstr "" +"Một phần hiệu chỉnh thất bại! Bạn có thể làm sạch bàn và thử lại. Kết quả " +"kiểm tra thất bại sẽ bị bỏ." + +msgid "" +"*We recommend you to add brand, materia, type, and even humidity level in " +"the Name" +msgstr "" +"*Chúng tôi khuyên bạn thêm thương hiệu, vật liệu, loại, và thậm chí mức độ " +"ẩm vào Tên" + +msgid "Please enter the name you want to save to printer." +msgstr "Vui lòng nhập tên bạn muốn lưu vào máy in." + +msgid "The name cannot exceed 40 characters." +msgstr "Tên không thể vượt quá 40 ký tự." + +msgid "Please find the best line on your plate" +msgstr "Vui lòng tìm đường tốt nhất trên bàn của bạn" + +msgid "Please find the corner with perfect degree of extrusion" +msgstr "Vui lòng tìm góc có mức độ đùn hoàn hảo" + +msgid "Input Value" +msgstr "Giá trị đầu vào" + +msgid "Save to Filament Preset" +msgstr "Lưu vào cài đặt sẵn filament" + +msgid "Record Factor" +msgstr "Hệ số ghi lại" + +msgid "We found the best flow ratio for you" +msgstr "Chúng tôi đã tìm thấy tỷ lệ lưu lượng tốt nhất cho bạn" + +msgid "Flow Ratio" +msgstr "Tỷ lệ lưu lượng" + +msgid "Please input a valid value (0.0 < flow ratio < 2.0)" +msgstr "Vui lòng nhập giá trị hợp lệ (0.0 < tỷ lệ lưu lượng < 2.0)" + +msgid "Please enter the name of the preset you want to save." +msgstr "Vui lòng nhập tên cài đặt sẵn bạn muốn lưu." + +msgid "Calibration1" +msgstr "Hiệu chỉnh1" + +msgid "Calibration2" +msgstr "Hiệu chỉnh2" + +msgid "Please find the best object on your plate" +msgstr "Vui lòng tìm đối tượng tốt nhất trên bàn của bạn" + +msgid "Fill in the value above the block with smoothest top surface" +msgstr "Điền giá trị phía trên khối có bề mặt trên mịn nhất" + +msgid "Skip Calibration2" +msgstr "Bỏ qua hiệu chỉnh2" + +#, c-format, boost-format +msgid "flow ratio : %s " +msgstr "tỷ lệ lưu lượng : %s " + +msgid "Please choose a block with smoothest top surface." +msgstr "Vui lòng chọn khối có bề mặt trên mịn nhất." + +msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" +msgstr "Vui lòng nhập giá trị hợp lệ (0 <= Tốc độ thể tích tối đa <= 60)" + +msgid "Calibration Type" +msgstr "Loại hiệu chỉnh" + +msgid "Complete Calibration" +msgstr "Hiệu chỉnh hoàn chỉnh" + +msgid "Fine Calibration based on flow ratio" +msgstr "Hiệu chỉnh tinh dựa trên tỷ lệ lưu lượng" + +msgid "Title" +msgstr "Tiêu đề" + +msgid "" +"A test model will be printed. Please clear the build plate and place it back " +"to the hot bed before calibration." +msgstr "" +"Một model kiểm tra sẽ được in. Vui lòng làm sạch bàn in và đặt lại vào bàn " +"nóng trước khi hiệu chỉnh." + +msgid "Printing Parameters" +msgstr "Tham số in" + +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + +msgid "Plate Type" +msgstr "Loại bàn" + +msgid "filament position" +msgstr "vị trí filament" + +msgid "Filament For Calibration" +msgstr "Filament để hiệu chỉnh" + +msgid "" +"Tips for calibration material:\n" +"- Materials that can share same hot bed temperature\n" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" +msgstr "" +"Mẹo cho vật liệu hiệu chỉnh: \n" +"- Vật liệu có thể chia sẻ cùng nhiệt độ bàn nóng\n" +"- Thương hiệu và họ filament khác nhau (Thương hiệu = Bambu, Họ = Cơ bản, Mờ)" + +msgid "Pattern" +msgstr "Mẫu" + +msgid "Method" +msgstr "Phương pháp" + +#, c-format, boost-format +msgid "%s is not compatible with %s" +msgstr "%s không tương thích với %s" + +msgid "TPU is not supported for Flow Dynamics Auto-Calibration." +msgstr "TPU không được hỗ trợ cho tự động hiệu chỉnh động lực lưu lượng." + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" +"Không thể in nhiều filament có chênh lệch nhiệt độ lớn cùng nhau. Nếu không, " +"extruder và đầu phun có thể bị tắc hoặc hư hỏng trong khi in" + +msgid "Sync AMS and nozzle information" +msgstr "" + +msgid "Connecting to printer" +msgstr "Đang kết nối với máy in" + +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + +msgid "From k Value" +msgstr "Từ giá trị k" + +msgid "To k Value" +msgstr "Đến giá trị k" + +msgid "Step value" +msgstr "Giá trị bước" + +msgid "The nozzle diameter has been synchronized from the printer Settings" +msgstr "Đường kính đầu phun đã được đồng bộ hóa từ Cài đặt máy in" + +msgid "From Volumetric Speed" +msgstr "Từ tốc độ thể tích" + +msgid "To Volumetric Speed" +msgstr "Đến tốc độ thể tích" + +msgid "Are you sure you want to cancel this print?" +msgstr "Bạn có chắc chắn muốn hủy lần in này?" + +msgid "Flow Dynamics Calibration Result" +msgstr "Kết quả hiệu chỉnh động lực lưu lượng" + +msgid "New" +msgstr "Mới" + +msgid "No History Result" +msgstr "Không có kết quả lịch sử" + +msgid "Success to get history result" +msgstr "Lấy kết quả lịch sử thành công" + +msgid "Refreshing the historical Flow Dynamics Calibration records" +msgstr "Đang làm mới các bản ghi hiệu chỉnh động lực lưu lượng lịch sử" + +msgid "Action" +msgstr "Hành động" + +#, c-format, boost-format +msgid "This machine type can only hold %d history results per nozzle." +msgstr "Loại máy này chỉ có thể giữ %d kết quả lịch sử trên mỗi đầu phun." + +msgid "Edit Flow Dynamics Calibration" +msgstr "Chỉnh sửa hiệu chỉnh động lực lưu lượng" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + +msgid "New Flow Dynamic Calibration" +msgstr "Hiệu chỉnh động lực lưu lượng mới" + +msgid "Ok" +msgstr "Ok" + +msgid "The filament must be selected." +msgstr "Filament phải được chọn." + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + +msgid "Network lookup" +msgstr "Tra cứu mạng" + +msgid "Address" +msgstr "Địa chỉ" + +msgid "Hostname" +msgstr "Tên máy chủ" + +msgid "Service name" +msgstr "Tên dịch vụ" + +msgid "OctoPrint version" +msgstr "Phiên bản OctoPrint" + +msgid "Searching for devices" +msgstr "Đang tìm kiếm thiết bị" + +msgid "Finished" +msgstr "Đã hoàn thành" + +msgid "Multiple resolved IP addresses" +msgstr "Nhiều địa chỉ IP được phân giải" + +#, boost-format +msgid "" +"There are several IP addresses resolving to hostname %1%.\n" +"Please select one that should be used." +msgstr "" +"Có nhiều địa chỉ IP phân giải thành tên máy chủ %1%.\n" +"Vui lòng chọn một địa chỉ nên được sử dụng." + +msgid "PA Calibration" +msgstr "Hiệu chỉnh PA" + +msgid "Extruder type" +msgstr "Loại extruder" + +msgid "DDE" +msgstr "DDE" + +msgid "PA Tower" +msgstr "Tháp PA" + +msgid "PA Line" +msgstr "Đường PA" + +msgid "PA Pattern" +msgstr "Mẫu PA" + +msgid "Start PA: " +msgstr "PA bắt đầu: " + +msgid "End PA: " +msgstr "PA kết thúc: " + +msgid "PA step: " +msgstr "Bước PA: " + +msgid "Accelerations: " +msgstr "Gia tốc: " + +msgid "Speeds: " +msgstr "Tốc độ: " + +msgid "Print numbers" +msgstr "In số" + +msgid "Comma-separated list of printing accelerations" +msgstr "Danh sách gia tốc in ngăn cách bằng dấu phẩy" + +msgid "Comma-separated list of printing speeds" +msgstr "Danh sách tốc độ in ngăn cách bằng dấu phẩy" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + +msgid "" +"Please input valid values:\n" +"Start PA: >= 0.0\n" +"End PA: > Start PA\n" +"PA step: >= 0.001" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"PA bắt đầu: >= 0.0\n" +"PA kết thúc: > PA bắt đầu\n" +"Bước PA: >= 0.001" + +msgid "Temperature calibration" +msgstr "Hiệu chỉnh nhiệt độ" + +msgid "Filament type" +msgstr "Loại filament" + +msgid "PLA" +msgstr "PLA" + +msgid "ABS/ASA" +msgstr "ABS/ASA" + +msgid "PETG" +msgstr "PETG" + +msgid "PCTG" +msgstr "PCTG" + +msgid "TPU" +msgstr "TPU" + +msgid "PA-CF" +msgstr "PA-CF" + +msgid "PET-CF" +msgstr "PET-CF" + +msgid "Start temp: " +msgstr "Nhiệt độ bắt đầu: " + +msgid "End temp: " +msgstr "Nhiệt độ kết thúc: " + +msgid "Temp step: " +msgstr "Bước nhiệt độ: " + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"Start temp: <= 350\n" +"End temp: >= 170\n" +"Start temp >= End temp + 5" +msgstr "" + +msgid "Max volumetric speed test" +msgstr "Kiểm tra tốc độ thể tích tối đa" + +msgid "Start volumetric speed: " +msgstr "Tốc độ thể tích bắt đầu: " + +msgid "End volumetric speed: " +msgstr "Tốc độ thể tích kết thúc: " + +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"start > 0\n" +"step >= 0\n" +"end > start + step" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"bắt đầu > 0\n" +"bước >= 0\n" +"kết thúc > bắt đầu + bước" + +msgid "VFA test" +msgstr "Kiểm tra VFA" + +msgid "Start speed: " +msgstr "Tốc độ bắt đầu: " + +msgid "End speed: " +msgstr "Tốc độ kết thúc: " + +msgid "Wiki Guide: VFA" +msgstr "" + +msgid "" +"Please input valid values:\n" +"start > 10\n" +"step >= 0\n" +"end > start + step" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"bắt đầu > 10\n" +"bước >= 0\n" +"kết thúc > bắt đầu + bước" + +msgid "Start retraction length: " +msgstr "Độ dài rút bắt đầu: " + +msgid "End retraction length: " +msgstr "Độ dài rút kết thúc: " + +msgid "Wiki Guide: Retraction Calibration" +msgstr "" + +msgid "Input shaping Frequency test" +msgstr "Kiểm tra tần số input shaping" + +msgid "Test model" +msgstr "Model kiểm tra" + +msgid "Ringing Tower" +msgstr "Tháp rung" + +msgid "Fast Tower" +msgstr "Tháp nhanh" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "Bắt đầu / Kết thúc" + +msgid "Frequency settings" +msgstr "Cài đặt tần số" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "Giảm chấn: " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"(0 < Tần số bắt đầu < Tần số kết thúc < 500)" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "Vui lòng nhập hệ số giảm chấn hợp lệ (0 < Hệ số giảm chấn/zeta <= 1)" + +msgid "Input shaping Damp test" +msgstr "Kiểm tra giảm chấn input shaping" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "Tần số" + +msgid "Damp" +msgstr "Giảm chấn" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "Lưu ý: Sử dụng tần số đã tính trước đó." + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" +"Vui lòng nhập giá trị hợp lệ:\n" +"(0 < Tần số < 500)" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" +"Vui lòng nhập hệ số giảm chấn hợp lệ (0 <= Giảm chấn bắt đầu < Giảm chấn kết " +"thúc <= 1)" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" +msgstr "Gửi G-code đến máy chủ máy in" + +msgid "Upload to Printer Host with the following filename:" +msgstr "Tải lên máy chủ máy in với tên file sau:" + +msgid "Use forward slashes ( / ) as a directory separator if needed." +msgstr "Sử dụng dấu gạch chéo ( / ) làm dấu phân cách thư mục nếu cần." + +msgid "Upload to storage" +msgstr "Tải lên bộ nhớ" + +msgid "Switch to Device tab after upload." +msgstr "Chuyển sang tab Thiết bị sau khi tải lên." + +#, c-format, boost-format +msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" +msgstr "" +"Tên file tải lên không kết thúc bằng \"%s\". Bạn có muốn tiếp tục không?" + +msgid "Upload" +msgstr "Tải lên" + +msgid "Print host upload queue" +msgstr "Hàng đợi tải lên máy chủ in" + +msgid "ID" +msgstr "ID" + +msgid "Progress" +msgstr "Tiến trình" + +msgid "Host" +msgstr "Máy chủ" + +msgctxt "OfFile" +msgid "Size" +msgstr "Kích thước" + +msgid "Filename" +msgstr "Tên file" + +msgid "Cancel selected" +msgstr "Hủy đã chọn" + +msgid "Show error message" +msgstr "Hiển thị thông báo lỗi" + +msgid "Queued" +msgstr "Đã xếp hàng" + +msgid "Uploading" +msgstr "Đang tải lên" + +msgid "Canceling" +msgstr "Đang hủy" + +msgid "Error uploading to print host" +msgstr "Lỗi khi tải lên máy chủ in" + +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" +"Loại bàn đã chọn không khớp với file. Vui lòng xác nhận trước khi bắt đầu in." + +msgid "Time-lapse" +msgstr "Timelapse" + +msgid "Heated Bed Leveling" +msgstr "San bằng bàn nóng" + +msgid "Textured Build Plate (Side A)" +msgstr "Bàn in có kết cấu (Mặt A)" + +msgid "Smooth Build Plate (Side B)" +msgstr "Bàn in mịn (Mặt B)" + +msgid "Unable to perform boolean operation on selected parts" +msgstr "Không thể thực hiện thao tác boolean trên các phần đã chọn" + +msgid "Mesh Boolean" +msgstr "Mesh Boolean" + +msgid "Union" +msgstr "Hợp" + +msgid "Difference" +msgstr "Hiệu" + +msgid "Intersection" +msgstr "Giao" + +msgid "Source Volume" +msgstr "Khối lượng nguồn" + +msgid "Tool Volume" +msgstr "Khối lượng công cụ" + +msgid "Subtract from" +msgstr "Trừ từ" + +msgid "Subtract with" +msgstr "Trừ với" + +msgid "selected" +msgstr "đã chọn" + +msgid "Part 1" +msgstr "Phần 1" + +msgid "Part 2" +msgstr "Phần 2" + +msgid "Delete input" +msgstr "Xóa đầu vào" + +msgid "Network Test" +msgstr "Kiểm tra mạng" + +msgid "Start Test Multi-Thread" +msgstr "Bắt đầu kiểm tra đa luồng" + +msgid "Start Test Single-Thread" +msgstr "Bắt đầu kiểm tra đơn luồng" + +msgid "Export Log" +msgstr "Xuất log" + +msgid "Snapmaker Orca Version:" +msgstr "Phiên bản Snapmaker Orca:" + +msgid "System Version:" +msgstr "Phiên bản hệ thống:" + +msgid "DNS Server:" +msgstr "Máy chủ DNS:" + +msgid "Test Snapmaker Orca (GitHub)" +msgstr "Kiểm tra Snapmaker Orca (GitHub)" + +msgid "Test Snapmaker Orca (GitHub):" +msgstr "Kiểm tra Snapmaker Orca (GitHub):" + +msgid "Test bing.com" +msgstr "Kiểm tra bing.com" + +msgid "Test bing.com:" +msgstr "Kiểm tra bing.com:" + +msgid "Log Info" +msgstr "Thông tin log" + +msgid "Select filament preset" +msgstr "Chọn cài đặt sẵn filament" + +msgid "Create Filament" +msgstr "Tạo filament" + +msgid "Create Based on Current Filament" +msgstr "Tạo dựa trên filament hiện tại" + +msgid "Copy Current Filament Preset " +msgstr "Sao chép cài đặt sẵn filament hiện tại " + +msgid "Basic Information" +msgstr "Thông tin cơ bản" + +msgid "Add Filament Preset under this filament" +msgstr "Thêm cài đặt sẵn filament dưới filament này" + +msgid "We could create the filament presets for your following printer:" +msgstr "Chúng tôi có thể tạo cài đặt sẵn filament cho máy in sau của bạn:" + +msgid "Select Vendor" +msgstr "Chọn nhà cung cấp" + +msgid "Input Custom Vendor" +msgstr "Nhập nhà cung cấp tùy chỉnh" + +msgid "Can't find vendor I want" +msgstr "Không thể tìm thấy nhà cung cấp tôi muốn" + +msgid "Select Type" +msgstr "Chọn loại" + +msgid "Select Filament Preset" +msgstr "Chọn cài đặt sẵn filament" + +msgid "Serial" +msgstr "Serial" + +msgid "e.g. Basic, Matte, Silk, Marble" +msgstr "ví dụ Cơ bản, Mờ, Lụa, Đá cẩm thạch" + +msgid "Filament Preset" +msgstr "Cài đặt sẵn filament" + +msgid "Create" +msgstr "Tạo" + +msgid "Vendor is not selected, please reselect vendor." +msgstr "Nhà cung cấp không được chọn, vui lòng chọn lại nhà cung cấp." + +msgid "Custom vendor is not input, please input custom vendor." +msgstr "" +"Nhà cung cấp tùy chỉnh không được nhập, vui lòng nhập nhà cung cấp tùy chỉnh." + +msgid "" +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." +msgstr "" +"\"Bambu\" hoặc \"Generic\" không thể được sử dụng làm nhà cung cấp cho " +"filament tùy chỉnh." + +msgid "Filament type is not selected, please reselect type." +msgstr "Loại filament không được chọn, vui lòng chọn lại loại." + +msgid "Filament serial is not entered, please enter serial." +msgstr "Serial filament không được nhập, vui lòng nhập serial." + +msgid "" +"There may be escape characters in the vendor or serial input of filament. " +"Please delete and re-enter." +msgstr "" +"Có thể có ký tự thoát trong đầu vào nhà cung cấp hoặc serial của filament. " +"Vui lòng xóa và nhập lại." + +msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." +msgstr "" +"Tất cả đầu vào trong nhà cung cấp tùy chỉnh hoặc serial là khoảng trắng. Vui " +"lòng nhập lại." + +msgid "The vendor cannot be a number. Please re-enter." +msgstr "Nhà cung cấp không thể là số. Vui lòng nhập lại." + +msgid "" +"You have not selected a printer or preset yet. Please select at least one." +msgstr "Bạn chưa chọn máy in hoặc cài đặt sẵn. Vui lòng chọn ít nhất một." + +#, c-format, boost-format +msgid "" +"The Filament name %s you created already exists.\n" +"If you continue creating, the preset created will be displayed with its full " +"name. Do you want to continue?" +msgstr "" +"Tên filament %s bạn đã tạo đã tồn tại.\n" +"Nếu bạn tiếp tục tạo, cài đặt sẵn được tạo sẽ được hiển thị với tên đầy đủ " +"của nó. Bạn có muốn tiếp tục không?" + +msgid "Some existing presets have failed to be created, as follows:\n" +msgstr "Một số cài đặt sẵn hiện có đã thất bại khi tạo, như sau:\n" + +msgid "" +"\n" +"Do you want to rewrite it?" +msgstr "" +"\n" +"Bạn có muốn viết lại nó không?" + +msgid "" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\".\n" +"To add preset for more printers, please go to printer selection" +msgstr "" +"Chúng tôi sẽ đổi tên cài đặt sẵn thành \"Nhà cung cấp Loại Serial @máy in " +"bạn đã chọn\".\n" +"Để thêm cài đặt sẵn cho nhiều máy in hơn, vui lòng đến chọn máy in" + +msgid "Create Printer/Nozzle" +msgstr "Tạo máy in/đầu phun" + +msgid "Create Printer" +msgstr "Tạo máy in" + +msgid "Create Nozzle for Existing Printer" +msgstr "Tạo đầu phun cho máy in hiện có" + +msgid "Create from Template" +msgstr "Tạo từ mẫu" + +msgid "Create Based on Current Printer" +msgstr "Tạo dựa trên máy in hiện tại" + +msgid "Import Preset" +msgstr "Nhập cài đặt sẵn" + +msgid "Create Type" +msgstr "Loại tạo" + +msgid "The model was not found, please reselect vendor." +msgstr "Model không tìm thấy, vui lòng chọn lại nhà cung cấp." + +msgid "Select Printer" +msgstr "Chọn máy in" + +msgid "Select Model" +msgstr "Chọn model" + +msgid "Input Custom Model" +msgstr "Nhập model tùy chỉnh" + +msgid "Can't find my printer model" +msgstr "Không thể tìm thấy model máy in của tôi" + +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + +msgid "Rectangle" +msgstr "Hình chữ nhật" + +msgid "Printable Space" +msgstr "Không gian có thể in" + +msgid "Hot Bed STL" +msgstr "Bàn nóng STL" + +msgid "Hot Bed SVG" +msgstr "Bàn nóng SVG" + +msgid "Max Print Height" +msgstr "Chiều cao in tối đa" + +#, c-format, boost-format +msgid "The file exceeds %d MB, please import again." +msgstr "File vượt quá %d MB, vui lòng nhập lại." + +msgid "Exception in obtaining file size, please import again." +msgstr "Ngoại lệ trong việc lấy kích thước file, vui lòng nhập lại." + +msgid "Preset path was not found, please reselect vendor." +msgstr "Đường dẫn cài đặt sẵn không tìm thấy, vui lòng chọn lại nhà cung cấp." + +msgid "The printer model was not found, please reselect." +msgstr "Model máy in không tìm thấy, vui lòng chọn lại." + +msgid "The nozzle diameter was not found, please reselect." +msgstr "Đường kính đầu phun không tìm thấy, vui lòng chọn lại." + +msgid "The printer preset was not found, please reselect." +msgstr "Cài đặt sẵn máy in không tìm thấy, vui lòng chọn lại." + +msgid "Printer Preset" +msgstr "Cài đặt sẵn máy in" + +msgid "Filament Preset Template" +msgstr "Mẫu cài đặt sẵn filament" + +msgid "Deselect All" +msgstr "Bỏ chọn tất cả" + +msgid "Process Preset Template" +msgstr "Mẫu cài đặt sẵn quy trình" + +msgid "" +"You have not yet chosen which printer preset to create based on. Please " +"choose the vendor and model of the printer" +msgstr "" +"Bạn chưa chọn cài đặt sẵn máy in nào để tạo dựa trên. Vui lòng chọn nhà cung " +"cấp và model của máy in" + +msgid "" +"You have entered an illegal input in the printable area section on the first " +"page. Please check before creating it." +msgstr "" +"Bạn đã nhập đầu vào không hợp lệ trong phần vùng có thể in trên trang đầu " +"tiên. Vui lòng kiểm tra trước khi tạo." + +msgid "" +"The printer preset you created already has a preset with the same name. Do " +"you want to overwrite it?\n" +"\tYes: Overwrite the printer preset with the same name, and filament and " +"process presets with the same preset name will be recreated \n" +"and filament and process presets without the same preset name will be " +"reserve.\n" +"\tCancel: Do not create a preset, return to the creation interface." +msgstr "" +"Cài đặt sẵn máy in bạn đã tạo đã có cài đặt sẵn với cùng tên. Bạn có muốn " +"ghi đè nó không?\n" +"\tCó: Ghi đè cài đặt sẵn máy in với cùng tên, và cài đặt sẵn filament và quy " +"trình với cùng tên cài đặt sẵn sẽ được tạo lại \n" +"và cài đặt sẵn filament và quy trình không có cùng tên cài đặt sẵn sẽ được " +"giữ lại.\n" +"\tHủy: Không tạo cài đặt sẵn, quay lại giao diện tạo." + +msgid "You need to select at least one filament preset." +msgstr "Bạn cần chọn ít nhất một cài đặt sẵn filament." + +msgid "You need to select at least one process preset." +msgstr "Bạn cần chọn ít nhất một cài đặt sẵn quy trình." + +msgid "Create filament presets failed. As follows:\n" +msgstr "Tạo cài đặt sẵn filament thất bại. Như sau:\n" + +msgid "Create process presets failed. As follows:\n" +msgstr "Tạo cài đặt sẵn quy trình thất bại. Như sau:\n" + +msgid "Vendor was not found, please reselect." +msgstr "Nhà cung cấp không tìm thấy, vui lòng chọn lại." + +msgid "Current vendor has no models, please reselect." +msgstr "Nhà cung cấp hiện tại không có model, vui lòng chọn lại." + +msgid "" +"You have not selected the vendor and model or entered the custom vendor and " +"model." +msgstr "" +"Bạn chưa chọn nhà cung cấp và model hoặc nhập nhà cung cấp tùy chỉnh và " +"model." + +msgid "" +"There may be escape characters in the custom printer vendor or model. Please " +"delete and re-enter." +msgstr "" +"Có thể có ký tự thoát trong nhà cung cấp máy in tùy chỉnh hoặc model. Vui " +"lòng xóa và nhập lại." + +msgid "" +"All inputs in the custom printer vendor or model are spaces. Please re-enter." +msgstr "" +"Tất cả đầu vào trong nhà cung cấp máy in tùy chỉnh hoặc model là khoảng " +"trắng. Vui lòng nhập lại." + +msgid "Please check bed printable shape and origin input." +msgstr "Vui lòng kiểm tra hình dạng có thể in của bàn và đầu vào gốc." + +msgid "" +"You have not yet selected the printer to replace the nozzle, please choose." +msgstr "Bạn chưa chọn máy in để thay thế đầu phun, vui lòng chọn." + +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" +msgstr "Máy in đã được tạo thành công" + +msgid "Filament Created Successfully" +msgstr "Filament đã được tạo thành công" + +msgid "Printer Created" +msgstr "Máy in đã được tạo" + +msgid "Please go to printer settings to edit your presets" +msgstr "Vui lòng đến cài đặt máy in để chỉnh sửa cài đặt sẵn của bạn" + +msgid "Filament Created" +msgstr "Filament đã được tạo" + +msgid "" +"Please go to filament setting to edit your presets if you need.\n" +"Please note that nozzle temperature, hot bed temperature, and maximum " +"volumetric speed has a significant impact on printing quality. Please set " +"them carefully." +msgstr "" +"Vui lòng đến cài đặt filament để chỉnh sửa cài đặt sẵn của bạn nếu bạn cần.\n" +"Lưu ý rằng nhiệt độ đầu phun, nhiệt độ bàn nóng, và tốc độ thể tích tối đa " +"có tác động đáng kể đến chất lượng in. Vui lòng đặt chúng cẩn thận." + +msgid "" +"\n" +"\n" +"Orca has detected that your user presets synchronization function is not " +"enabled, which may result in unsuccessful Filament settings on the Device " +"page.\n" +"Click \"Sync user presets\" to enable the synchronization function." +msgstr "" +"\n" +"\n" +"Orca đã phát hiện rằng chức năng đồng bộ hóa cài đặt sẵn người dùng của bạn " +"không được bật, có thể dẫn đến cài đặt filament không thành công trên trang " +"Thiết bị.\n" +"Nhấp \"Đồng bộ cài đặt sẵn người dùng\" để bật chức năng đồng bộ hóa." + +msgid "Printer Setting" +msgstr "Cài đặt máy in" + +msgid "Printer config bundle(.orca_printer)" +msgstr "Gói cấu hình máy in(.orca_printer)" + +msgid "Filament bundle(.orca_filament)" +msgstr "Gói filament(.orca_filament)" + +msgid "Printer presets(.zip)" +msgstr "Cài đặt sẵn máy in(.zip)" + +msgid "Filament presets(.zip)" +msgstr "Cài đặt sẵn filament(.zip)" + +msgid "Process presets(.zip)" +msgstr "Cài đặt sẵn quy trình(.zip)" + +msgid "initialize fail" +msgstr "khởi tạo thất bại" + +msgid "add file fail" +msgstr "thêm file thất bại" + +msgid "add bundle structure file fail" +msgstr "thêm file cấu trúc gói thất bại" + +msgid "finalize fail" +msgstr "hoàn thiện thất bại" + +msgid "open zip written fail" +msgstr "mở zip đã ghi thất bại" + +msgid "Export successful" +msgstr "Xuất thành công" + +#, c-format, boost-format +msgid "" +"The '%s' folder already exists in the current directory. Do you want to " +"clear it and rebuild it.\n" +"If not, a time suffix will be added, and you can modify the name after " +"creation." +msgstr "" +"Thư mục '%s' đã tồn tại trong thư mục hiện tại. Bạn có muốn xóa nó và xây " +"dựng lại không.\n" +"Nếu không, hậu tố thời gian sẽ được thêm vào, và bạn có thể sửa đổi tên sau " +"khi tạo." + +#, c-format, boost-format +msgid "" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" +"File: %s\n" +"có thể đã được mở bởi chương trình khác.\n" +"Vui lòng đóng nó và thử lại." + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" +"Can be shared with others." +msgstr "" +"Máy in và tất cả cài đặt sẵn filament&&quy trình thuộc về máy in.\n" +"Có thể chia sẻ với người khác." + +msgid "" +"User's filament preset set.\n" +"Can be shared with others." +msgstr "" +"Bộ cài đặt sẵn filament của người dùng.\n" +"Có thể chia sẻ với người khác." + +msgid "" +"Only display printer names with changes to printer, filament, and process " +"presets." +msgstr "" +"Chỉ hiển thị tên máy in có thay đổi đối với cài đặt sẵn máy in, filament và " +"quy trình ." + +msgid "Only display the filament names with changes to filament presets." +msgstr "Chỉ hiển thị tên filament có thay đổi đối với cài đặt sẵn filament." + +msgid "" +"Only printer names with user printer presets will be displayed, and each " +"preset you choose will be exported as a zip." +msgstr "" +"Chỉ tên máy in có cài đặt sẵn máy in người dùng sẽ được hiển thị, và mỗi cài " +"đặt sẵn bạn chọn sẽ được xuất dưới dạng zip." + +msgid "" +"Only the filament names with user filament presets will be displayed, \n" +"and all user filament presets in each filament name you select will be " +"exported as a zip." +msgstr "" +"Chỉ tên filament có cài đặt sẵn filament người dùng sẽ được hiển thị, \n" +"và tất cả cài đặt sẵn filament người dùng trong mỗi tên filament bạn chọn sẽ " +"được xuất dưới dạng zip." + +msgid "" +"Only printer names with changed process presets will be displayed, \n" +"and all user process presets in each printer name you select will be " +"exported as a zip." +msgstr "" +"Chỉ tên máy in có cài đặt sẵn quy trình đã thay đổi sẽ được hiển thị, \n" +"và tất cả cài đặt sẵn quy trình người dùng trong mỗi tên máy in bạn chọn sẽ " +"được xuất dưới dạng zip." + +msgid "Please select at least one printer or filament." +msgstr "Vui lòng chọn ít nhất một máy in hoặc filament." + +msgid "Please select a type you want to export" +msgstr "Vui lòng chọn loại bạn muốn xuất" + +msgid "Failed to create temporary folder, please try Export Configs again." +msgstr "Không thể tạo thư mục tạm thời, vui lòng thử Xuất cấu hình lại." + +msgid "Edit Filament" +msgstr "Chỉnh sửa filament" + +msgid "Filament presets under this filament" +msgstr "Cài đặt sẵn filament dưới filament này" + +msgid "" +"Note: If the only preset under this filament is deleted, the filament will " +"be deleted after exiting the dialog." +msgstr "" +"Lưu ý: Nếu cài đặt sẵn duy nhất dưới filament này bị xóa, filament sẽ được " +"xóa sau khi thoát khỏi hộp thoại." + +msgid "Presets inherited by other presets cannot be deleted" +msgstr "Cài đặt sẵn được kế thừa bởi cài đặt sẵn khác không thể bị xóa" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "Các cài đặt sẵn sau kế thừa cài đặt sẵn này." + +msgid "Delete Preset" +msgstr "Xóa cài đặt sẵn" + +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"Bạn có chắc chắn xóa cài đặt sẵn đã chọn không?\n" +"Nếu cài đặt sẵn tương ứng với filament hiện đang được sử dụng trên máy in " +"của bạn, vui lòng đặt lại thông tin filament cho vị trí đó." + +msgid "Are you sure to delete the selected preset?" +msgstr "Bạn có chắc chắn xóa cài đặt sẵn đã chọn không?" + +msgid "Delete preset" +msgstr "Xóa cài đặt sẵn" + +msgid "+ Add Preset" +msgstr "+ Thêm cài đặt sẵn" + +msgid "" +"All the filament presets belong to this filament would be deleted.\n" +"If you are using this filament on your printer, please reset the filament " +"information for that slot." +msgstr "" +"Tất cả cài đặt sẵn filament thuộc về filament này sẽ bị xóa.\n" +"Nếu bạn đang sử dụng filament này trên máy in của bạn, vui lòng đặt lại " +"thông tin filament cho vị trí đó." + +msgid "Delete filament" +msgstr "Xóa filament" + +msgid "Add Preset" +msgstr "Thêm cài đặt sẵn" + +msgid "Add preset for new printer" +msgstr "Thêm cài đặt sẵn cho máy in mới" + +msgid "Copy preset from filament" +msgstr "Sao chép cài đặt sẵn từ filament" + +msgid "The filament choice not find filament preset, please reselect it" +msgstr "" +"Lựa chọn filament không tìm thấy cài đặt sẵn filament, vui lòng chọn lại" + +msgid "[Delete Required]" +msgstr "[Yêu cầu xóa]" + +msgid "Edit Preset" +msgstr "Chỉnh sửa cài đặt sẵn" + +msgid "For more information, please check out Wiki" +msgstr "Để biết thêm thông tin, vui lòng xem Wiki" + +msgid "Collapse" +msgstr "Thu gọn" + +msgid "Daily Tips" +msgstr "Mẹo hàng ngày" + +#, c-format, boost-format +msgid "nozzle size in preset: %d" +msgstr "" + +#, c-format, boost-format +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" + +msgid "Need select printer" +msgstr "Cần chọn máy in" + +msgid "The start, end or step is not valid value." +msgstr "Giá trị bắt đầu, kết thúc hoặc bước không hợp lệ." + +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + +msgid "" +"Unable to calibrate: maybe because the set calibration value range is too " +"large, or the step is too small" +msgstr "" +"Không thể hiệu chỉnh: có thể do phạm vi giá trị hiệu chỉnh được đặt quá lớn, " +"hoặc bước quá nhỏ" + +msgid "Physical Printer" +msgstr "Máy in vật lý" + +msgid "Print Host upload" +msgstr "Tải lên máy chủ in" + +msgid "Could not get a valid Printer Host reference" +msgstr "Không thể có tham chiếu máy chủ máy in hợp lệ" + +msgid "Success!" +msgstr "Thành công!" + +msgid "Are you sure to log out?" +msgstr "Bạn có chắc chắn đăng xuất không?" + +msgid "View print host webui in Device tab" +msgstr "Xem webui máy chủ in trong tab Thiết bị" + +msgid "Replace the BambuLab's device tab with print host webui" +msgstr "Thay thế tab thiết bị của BambuLab bằng webui máy chủ in" + +msgid "" +"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" +"signed certificate." +msgstr "" +"File CA HTTPS là tùy chọn. Nó chỉ cần thiết nếu bạn sử dụng HTTPS với chứng " +"chỉ tự ký." + +msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "File chứng chỉ (*.crt, *.pem)|*.crt;*.pem|Tất cả file|*.*" + +msgid "Open CA certificate file" +msgstr "Mở file chứng chỉ CA" + +#, c-format, boost-format +msgid "" +"On this system, %s uses HTTPS certificates from the system Certificate Store " +"or Keychain." +msgstr "" +"Trên hệ thống này, %s sử dụng chứng chỉ HTTPS từ Kho chứng chỉ hệ thống hoặc " +"Keychain." + +msgid "" +"To use a custom CA file, please import your CA file into Certificate Store / " +"Keychain." +msgstr "" +"Để sử dụng file CA tùy chỉnh, vui lòng nhập file CA của bạn vào Kho chứng " +"chỉ / Keychain." + +msgid "Login/Test" +msgstr "Đăng nhập/Kiểm tra" + +msgid "Connection to printers connected via the print host failed." +msgstr "Kết nối với máy in được kết nối qua máy chủ in thất bại." + +#, c-format, boost-format +msgid "Mismatched type of print host: %s" +msgstr "Loại máy chủ in không khớp: %s" + +msgid "Connection to AstroBox is working correctly." +msgstr "Kết nối với AstroBox hoạt động chính xác." + +msgid "Could not connect to AstroBox" +msgstr "Không thể kết nối với AstroBox" + +msgid "Note: AstroBox version 1.1.0 or higher is required." +msgstr "Lưu ý: Yêu cầu phiên bản AstroBox 1.1.0 trở lên." + +msgid "Connection to Duet is working correctly." +msgstr "Kết nối với Duet hoạt động chính xác." + +msgid "Could not connect to Duet" +msgstr "Không thể kết nối với Duet" + +msgid "Unknown error occurred" +msgstr "Đã xảy ra lỗi không xác định" + +msgid "Wrong password" +msgstr "Mật khẩu sai" + +msgid "Could not get resources to create a new connection" +msgstr "Không thể lấy tài nguyên để tạo kết nối mới" + +msgid "Upload not enabled on FlashAir card." +msgstr "Tải lên không được bật trên thẻ FlashAir." + +msgid "Connection to FlashAir is working correctly and upload is enabled." +msgstr "Kết nối với FlashAir hoạt động chính xác và tải lên được bật." + +msgid "Could not connect to FlashAir" +msgstr "Không thể kết nối với FlashAir" + +msgid "" +"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " +"is required." +msgstr "" +"Lưu ý: Yêu cầu FlashAir với firmware 2.00.02 trở lên và chức năng tải lên " +"được kích hoạt." + +msgid "Connection to MKS is working correctly." +msgstr "Kết nối với MKS hoạt động chính xác." + +msgid "Could not connect to MKS" +msgstr "Không thể kết nối với MKS" + +msgid "Connection to OctoPrint is working correctly." +msgstr "Kết nối với OctoPrint hoạt động chính xác." + +msgid "Could not connect to OctoPrint" +msgstr "Không thể kết nối với OctoPrint" + +msgid "Note: OctoPrint version 1.1.0 or higher is required." +msgstr "Lưu ý: Yêu cầu phiên bản OctoPrint 1.1.0 trở lên." + +msgid "Connection to Prusa SL1 / SL1S is working correctly." +msgstr "Kết nối với Prusa SL1 / SL1S hoạt động chính xác." + +msgid "Could not connect to Prusa SLA" +msgstr "Không thể kết nối với Prusa SLA" + +msgid "Connection to PrusaLink is working correctly." +msgstr "Kết nối với PrusaLink hoạt động chính xác." + +msgid "Could not connect to PrusaLink" +msgstr "Không thể kết nối với PrusaLink" + +msgid "Storages found" +msgstr "Đã tìm thấy bộ nhớ" + +#. TRN %1% = storage path +#, boost-format +msgid "%1% : read only" +msgstr "%1% : chỉ đọc" + +#. TRN %1% = storage path +#, boost-format +msgid "%1% : no free space" +msgstr "%1% : không có dung lượng trống" + +#. TRN %1% = host +#, boost-format +msgid "Upload has failed. There is no suitable storage found at %1%." +msgstr "Tải lên thất bại. Không tìm thấy bộ nhớ phù hợp tại %1%." + +msgid "Connection to Prusa Connect is working correctly." +msgstr "Kết nối với Prusa Connect hoạt động chính xác." + +msgid "Could not connect to Prusa Connect" +msgstr "Không thể kết nối với Prusa Connect" + +msgid "Connection to Repetier is working correctly." +msgstr "Kết nối với Repetier hoạt động chính xác." + +msgid "Could not connect to Repetier" +msgstr "Không thể kết nối với Repetier" + +msgid "Note: Repetier version 0.90.0 or higher is required." +msgstr "Lưu ý: Yêu cầu phiên bản Repetier 0.90.0 trở lên." + +#, boost-format +msgid "" +"HTTP status: %1%\n" +"Message body: \"%2%\"" +msgstr "" +"Trạng thái HTTP: %1%\n" +"Nội dung thông báo: \"%2%\"" + +#, boost-format +msgid "" +"Parsing of host response failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" +"Phân tích phản hồi máy chủ thất bại.\n" +"Nội dung thông báo: \"%1%\"\n" +"Lỗi: \"%2%\"" + +#, boost-format +msgid "" +"Enumeration of host printers failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" +"Liệt kê máy in máy chủ thất bại.\n" +"Nội dung thông báo: \"%1%\"\n" +"Lỗi: \"%2%\"" + +msgid "" +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." +msgstr "" +"Nó có chiều cao lớp nhỏ. Điều này dẫn đến các đường lớp gần như không đáng " +"kể và chất lượng in cao. Nó phù hợp cho hầu hết các trường hợp in." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có tốc độ và gia tốc thấp hơn, " +"và mẫu infill thưa là Gyroid. Điều này dẫn đến chất lượng in cao hơn nhiều " +"nhưng thời gian in dài hơn nhiều." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a slightly " +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có chiều cao lớp lớn hơn một " +"chút. Điều này dẫn đến các đường lớp gần như không đáng kể và thời gian in " +"ngắn hơn một chút." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " +"height. This results in slightly visible layer lines but shorter print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp nhìn thấy một chút nhưng thời gian in ngắn hơn." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp gần như không nhìn thấy và chất lượng in cao hơn " +"nhưng thời gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"lines, lower speeds and acceleration, and the sparse infill pattern is " +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có các đường lớp nhỏ hơn, tốc " +"độ và gia tốc thấp hơn, và mẫu infill thưa là Gyroid. Điều này dẫn đến các " +"đường lớp gần như không nhìn thấy và chất lượng in cao hơn nhiều nhưng thời " +"gian in dài hơn nhiều." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp tối thiểu và chất lượng in cao hơn nhưng thời gian " +"in dài hơn." + +msgid "" +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"lines, lower speeds and acceleration, and the sparse infill pattern is " +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.2 mm, nó có các đường lớp nhỏ hơn, tốc " +"độ và gia tốc thấp hơn, và mẫu infill thưa là Gyroid. Điều này dẫn đến các " +"đường lớp tối thiểu và chất lượng in cao hơn nhiều nhưng thời gian in dài " +"hơn nhiều." + +msgid "" +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." +msgstr "" +"Nó có chiều cao lớp bình thường. Điều này dẫn đến các đường lớp trung bình " +"và chất lượng in. Nó phù hợp cho hầu hết các trường hợp in." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có nhiều vòng thành hơn và mật " +"độ infill thưa cao hơn. Điều này dẫn đến độ bền in cao hơn nhưng tiêu thụ " +"filament nhiều hơn và thời gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp rõ ràng hơn và chất lượng in thấp hơn, nhưng thời " +"gian in ngắn hơn một chút." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp rõ ràng hơn và chất lượng in thấp hơn, nhưng thời " +"gian in ngắn hơn." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp ít rõ ràng hơn và chất lượng in cao hơn nhưng thời " +"gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " +"height, lower speeds and acceleration, and the sparse infill pattern is " +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp nhỏ hơn, tốc " +"độ và gia tốc thấp hơn, và mẫu infill thưa là Gyroid. Điều này dẫn đến các " +"đường lớp ít rõ ràng hơn và chất lượng in cao hơn nhiều nhưng thời gian in " +"dài hơn nhiều." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp gần như không đáng kể và chất lượng in cao hơn " +"nhưng thời gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " +"height, lower speeds and acceleration, and the sparse infill pattern is " +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp nhỏ hơn, tốc " +"độ và gia tốc thấp hơn, và mẫu infill thưa là Gyroid. Điều này dẫn đến các " +"đường lớp gần như không đáng kể và chất lượng in cao hơn nhiều nhưng thời " +"gian in dài hơn nhiều." + +msgid "" +"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " +"height. This results in almost negligible layer lines and longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.4 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp gần như không đáng kể và thời gian in dài hơn." + +msgid "" +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." +msgstr "" +"Nó có chiều cao lớp lớn. Điều này dẫn đến các đường lớp rõ ràng và chất " +"lượng in và thời gian in bình thường." + +msgid "" +"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.6 mm, nó có nhiều vòng thành hơn và mật " +"độ infill thưa cao hơn. Điều này dẫn đến độ bền in cao hơn nhưng tiêu thụ " +"filament nhiều hơn và thời gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.6 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp rõ ràng hơn và chất lượng in thấp hơn, nhưng thời " +"gian in ngắn hơn trong một số trường hợp." + +msgid "" +"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.6 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp rõ ràng hơn nhiều và chất lượng in thấp hơn nhiều, " +"nhưng thời gian in ngắn hơn trong một số trường hợp." + +msgid "" +"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.6 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp ít rõ ràng hơn và chất lượng in cao hơn một chút " +"nhưng thời gian in dài hơn." + +msgid "" +"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.6 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp ít rõ ràng hơn và chất lượng in cao hơn nhưng thời " +"gian in dài hơn." + +msgid "" +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." +msgstr "" +"Nó có chiều cao lớp rất lớn. Điều này dẫn đến các đường lớp rất rõ ràng, " +"chất lượng in thấp và thời gian in ngắn hơn." + +msgid "" +"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.8 mm, nó có chiều cao lớp lớn hơn. Điều " +"này dẫn đến các đường lớp rất rõ ràng và chất lượng in thấp hơn nhiều, nhưng " +"thời gian in ngắn hơn trong một số trường hợp." + +msgid "" +"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.8 mm, nó có chiều cao lớp lớn hơn " +"nhiều. Điều này dẫn đến các đường lớp cực kỳ rõ ràng và chất lượng in thấp " +"hơn nhiều, nhưng thời gian in ngắn hơn nhiều trong một số trường hợp." + +msgid "" +"Compared with the default profile of a 0.8 mm nozzle, it has a slightly " +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.8 mm, nó có chiều cao lớp nhỏ hơn một " +"chút. Điều này dẫn đến các đường lớp ít hơn một chút nhưng vẫn rõ ràng và " +"chất lượng in cao hơn một chút nhưng thời gian in dài hơn trong một số " +"trường hợp." + +msgid "" +"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" +"So với hồ sơ mặc định của đầu phun 0.8 mm, nó có chiều cao lớp nhỏ hơn. Điều " +"này dẫn đến các đường lớp ít hơn nhưng vẫn rõ ràng và chất lượng in cao hơn " +"một chút nhưng thời gian in dài hơn trong một số trường hợp." + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "Không có AMS" + +msgid "There is no device available to send printing." +msgstr "Không có thiết bị khả dụng để gửi in." + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "Số lượng máy in sử dụng đồng thời không thể bằng 0." + +msgid "Use External Spool" +msgstr "Dùng cuộn ngoài" + +msgid "Select Printers" +msgstr "Chọn máy in" + +msgid "Device Name" +msgstr "Tên thiết bị" + +msgid "Device Status" +msgstr "Trạng thái thiết bị" + +msgid "AMS Status" +msgstr "Trạng thái AMS" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "" +"Vui lòng chọn các thiết bị bạn muốn quản lý tại đây (tối đa 6 thiết bị)" + +msgid "Printing Options" +msgstr "Tùy chọn in" + +msgid "Bed Leveling" +msgstr "San bằng đế" + +msgid "Flow Dynamic Calibration" +msgstr "Hiệu chỉnh flow động" + +msgid "Send Options" +msgstr "Tùy chọn gửi" + +msgid "Send to" +msgstr "Gửi đến" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "" +"máy in cùng lúc. (Tùy thuộc vào số lượng thiết bị có thể nung nóng cùng lúc.)" + +msgid "Wait" +msgstr "Chờ" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "phút mỗi đợt. (Tùy thuộc vào thời gian cần để hoàn thành nung nóng.)" + +msgid "Task Sending" +msgstr "Đang gửi tác vụ" + +msgid "Task Sent" +msgstr "Đã gửi tác vụ" + +msgid "Edit multiple printers" +msgstr "Chỉnh sửa nhiều máy in" + +msgid "Select connected printers (0/6)" +msgstr "Chọn máy in đã kết nối (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "Chọn máy in đã kết nối (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "Số lượng máy in tối đa có thể chọn là %d" + +msgid "No task" +msgstr "Không có tác vụ" + +msgid "Edit Printers" +msgstr "Chỉnh sửa máy in" + +msgid "Task Name" +msgstr "Tên tác vụ" + +msgid "Actions" +msgstr "Thao tác" + +msgid "Task Status" +msgstr "Trạng thái tác vụ" + +msgid "Sent Time" +msgstr "Thời gian gửi" + +msgid "There are no tasks to be sent!" +msgstr "Không có tác vụ để gửi!" + +msgid "No historical tasks!" +msgstr "Không có tác vụ lịch sử!" + +msgid "Upgrading" +msgstr "Đang nâng cấp" + +msgid "syncing" +msgstr "đang đồng bộ" + +msgid "Printing Finish" +msgstr "In hoàn tất" + +msgid "Printing Failed" +msgstr "In thất bại" + +msgid "Printing Pause" +msgstr "Tạm dừng in" + +msgid "Pending" +msgstr "Đang chờ" + +msgid "Sending" +msgstr "Đang gửi" + +msgid "Sending Finish" +msgstr "Gửi hoàn tất" + +msgid "Sending Cancel" +msgstr "Hủy gửi" + +msgid "Sending Failed" +msgstr "Gửi thất bại" + +msgid "Print Success" +msgstr "In thành công" + +msgid "Print Failed" +msgstr "In thất bại" + +msgid "Removed" +msgstr "Đã xóa" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." +msgstr "" + +msgid "Connected to Obico successfully!" +msgstr "Kết nối với Obico thành công!" + +msgid "Could not connect to Obico" +msgstr "Không thể kết nối với Obico" + +msgid "Connected to SimplyPrint successfully!" +msgstr "Kết nối với SimplyPrint thành công!" + +msgid "Could not connect to SimplyPrint" +msgstr "Không thể kết nối với SimplyPrint" + +msgid "Internal error" +msgstr "Lỗi nội bộ" + +msgid "Unknown error" +msgstr "Lỗi không xác định" + +msgid "SimplyPrint account not linked. Go to Connect options to set it up." +msgstr "" +"Tài khoản SimplyPrint chưa được liên kết. Đến tùy chọn Kết nối để thiết lập." + +msgid "Serial connection to Flashforge is working correctly." +msgstr "Kết nối serial với Flashforge hoạt động chính xác." + +msgid "Could not connect to Flashforge via serial" +msgstr "Không thể kết nối với Flashforge qua serial" + +msgid "The provided state is not correct." +msgstr "Trạng thái được cung cấp không chính xác." + +msgid "Please give the required permissions when authorizing this application." +msgstr "Vui lòng cấp quyền cần thiết khi ủy quyền ứng dụng này." + +msgid "Something unexpected happened when trying to log in, please try again." +msgstr "" +"Đã xảy ra điều gì đó không mong đợi khi cố gắng đăng nhập, vui lòng thử lại." + +msgid "User canceled." +msgstr "Người dùng đã hủy." + +msgid "Head diameter" +msgstr "Đường kính đầu" + +msgid "Max angle" +msgstr "Góc tối đa" + +msgid "Detection radius" +msgstr "Bán kính phát hiện" + +msgid "Remove selected points" +msgstr "Xóa điểm đã chọn" + +msgid "Remove all" +msgstr "Xóa tất cả" + +msgid "Auto-generate points" +msgstr "Tự động tạo điểm" + +msgid "Add a brim ear" +msgstr "Thêm tai vành" + +msgid "Delete a brim ear" +msgstr "Xóa tai vành" + +msgid "Adjust head diameter" +msgstr "Điều chỉnh đường kính đầu" + +msgid "Adjust section view" +msgstr "Điều chỉnh chế độ xem phần" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "" +"Cảnh báo: Loại vành không được đặt thành \"được vẽ\", tai vành sẽ không có " +"hiệu lực!" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "Đặt loại vành của đối tượng này thành \"được vẽ\"" + +msgid " invalid brim ears" +msgstr " tai vành không hợp lệ" + +msgid "Brim Ears" +msgstr "Tai vành" + +msgid "Please select single object." +msgstr "Vui lòng chọn một đối tượng duy nhất." + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" + +#: resources/data/hints.ini: [hint:Precise wall] +msgid "" +"Precise wall\n" +"Did you know that turning on precise wall can improve precision and layer " +"consistency?" +msgstr "" +"Thành chính xác\n" +"Bạn có biết rằng bật thành chính xác có thể cải thiện độ chính xác và tính " +"nhất quán của lớp không?" + +#: resources/data/hints.ini: [hint:Sandwich mode] +msgid "" +"Sandwich mode\n" +"Did you know that you can use sandwich mode (inner-outer-inner) to improve " +"precision and layer consistency if your model doesn't have very steep " +"overhangs?" +msgstr "" +"Chế độ sandwich\n" +"Bạn có biết rằng bạn có thể sử dụng chế độ sandwich (trong-ngoài-trong) để " +"cải thiện độ chính xác và tính nhất quán của lớp nếu model của bạn không có " +"phần nhô rất dốc không?" + +#: resources/data/hints.ini: [hint:Chamber temperature] +msgid "" +"Chamber temperature\n" +"Did you know that Snapmaker Orca supports chamber temperature?" +msgstr "" +"Nhiệt độ buồng\n" +"Bạn có biết rằng Snapmaker Orca hỗ trợ nhiệt độ buồng không?" + +#: resources/data/hints.ini: [hint:Calibration] +msgid "" +"Calibration\n" +"Did you know that calibrating your printer can do wonders? Check out our " +"beloved calibration solution in Snapmaker Orca." +msgstr "" +"Hiệu chỉnh\n" +"Bạn có biết rằng hiệu chỉnh máy in của bạn có thể làm điều kỳ diệu không? " +"Xem giải pháp hiệu chỉnh yêu thích của chúng tôi trong Snapmaker Orca." + +#: resources/data/hints.ini: [hint:Auxiliary fan] +msgid "" +"Auxiliary fan\n" +"Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" +msgstr "" +"Quạt phụ\n" +"Bạn có biết rằng Snapmaker Orca hỗ trợ quạt làm mát phần phụ không?" + +#: resources/data/hints.ini: [hint:Air filtration] +msgid "" +"Air filtration/Exhaust Fan\n" +"Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" +msgstr "" +"Lọc không khí/Quạt thải\n" +"Bạn có biết rằng Snapmaker Orca có thể hỗ trợ lọc không khí/Quạt thải không?" + +#: resources/data/hints.ini: [hint:G-code window] +msgid "" +"G-code window\n" +"You can turn on/off the G-code window by pressing the C key." +msgstr "" +"Cửa sổ G-code\n" +"Bạn có thể bật/tắt cửa sổ G-code bằng cách nhấn phím C." + +#: resources/data/hints.ini: [hint:Switch workspaces] +msgid "" +"Switch workspaces\n" +"You can switch between Prepare and Preview workspaces by " +"pressing the Tab key." +msgstr "" +"Chuyển đổi không gian làm việc\n" +"Bạn có thể chuyển đổi giữa không gian làm việc Chuẩn bị và Xem " +"trước bằng cách nhấn phím Tab." + +#: resources/data/hints.ini: [hint:How to use keyboard shortcuts] +msgid "" +"How to use keyboard shortcuts\n" +"Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " +"3D scene operations?" +msgstr "" +"Cách sử dụng phím tắt\n" +"Bạn có biết rằng Snapmaker Orca cung cấp nhiều phím tắt và thao tác cảnh 3D " +"không?" + +#: resources/data/hints.ini: [hint:Reverse on odd] +msgid "" +"Reverse on odd\n" +"Did you know that Reverse on odd feature can significantly improve " +"the surface quality of your overhangs?" +msgstr "" +"Đảo ngược trên lẻ\n" +"Bạn có biết rằng tính năng Đảo ngược trên lẻ có thể cải thiện đáng kể " +"chất lượng bề mặt của phần nhô của bạn không?" + +#: resources/data/hints.ini: [hint:Cut Tool] +msgid "" +"Cut Tool\n" +"Did you know that you can cut a model at any angle and position with the " +"cutting tool?" +msgstr "" +"Công cụ cắt\n" +"Bạn có biết rằng bạn có thể cắt model ở bất kỳ góc và vị trí nào với công cụ " +"cắt không?" + +#: resources/data/hints.ini: [hint:Fix Model] +msgid "" +"Fix Model\n" +"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " +"problems on the Windows system?" +msgstr "" +"Sửa model\n" +"Bạn có biết rằng bạn có thể sửa model 3D bị hỏng để tránh nhiều vấn đề slice " +"trên hệ thống Windows không?" + +#: resources/data/hints.ini: [hint:Timelapse] +msgid "" +"Timelapse\n" +"Did you know that you can generate a timelapse video during each print?" +msgstr "" +"Timelapse\n" +"Bạn có biết rằng bạn có thể tạo video timelapse trong mỗi lần in không?" + +#: resources/data/hints.ini: [hint:Auto-Arrange] +msgid "" +"Auto-Arrange\n" +"Did you know that you can auto-arrange all the objects in your project?" +msgstr "" +"Tự động sắp xếp\n" +"Bạn có biết rằng bạn có thể tự động sắp xếp tất cả các đối tượng trong dự án " +"của bạn không?" + +#: resources/data/hints.ini: [hint:Auto-Orient] +msgid "" +"Auto-Orient\n" +"Did you know that you can rotate objects to an optimal orientation for " +"printing with a simple click?" +msgstr "" +"Tự động định hướng\n" +"Bạn có biết rằng bạn có thể xoay đối tượng đến định hướng tối ưu để in chỉ " +"bằng một cú nhấp chuột đơn giản không?" + +#: resources/data/hints.ini: [hint:Lay on Face] +msgid "" +"Lay on Face\n" +"Did you know that you can quickly orient a model so that one of its faces " +"sits on the print bed? Select the \"Place on face\" function or press the " +"F key." +msgstr "" +"Đặt lên mặt\n" +"Bạn có biết rằng bạn có thể nhanh chóng định hướng model để một trong các " +"mặt của nó nằm trên bàn in không? Chọn chức năng \"Đặt trên mặt\" hoặc nhấn " +"phím F." + +#: resources/data/hints.ini: [hint:Object List] +msgid "" +"Object List\n" +"Did you know that you can view all objects/parts in a list and change " +"settings for each object/part?" +msgstr "" +"Danh sách đối tượng\n" +"Bạn có biết rằng bạn có thể xem tất cả đối tượng/phần trong danh sách và " +"thay đổi cài đặt cho từng đối tượng/phần không?" + +#: resources/data/hints.ini: [hint:Search Functionality] +msgid "" +"Search Functionality\n" +"Did you know that you use the Search tool to quickly find a specific Orca " +"Slicer setting?" +msgstr "" +"Chức năng tìm kiếm\n" +"Bạn có biết rằng bạn có thể sử dụng công cụ Tìm kiếm để nhanh chóng tìm cài " +"đặt Snapmaker Orca cụ thể không?" + +#: resources/data/hints.ini: [hint:Simplify Model] +msgid "" +"Simplify Model\n" +"Did you know that you can reduce the number of triangles in a mesh using the " +"Simplify mesh feature? Right-click the model and select Simplify model." +msgstr "" +"Đơn giản hóa model\n" +"Bạn có biết rằng bạn có thể giảm số lượng tam giác trong mesh bằng cách sử " +"dụng tính năng Đơn giản hóa mesh không? Nhấp chuột phải vào model và chọn " +"Đơn giản hóa model." + +#: resources/data/hints.ini: [hint:Slicing Parameter Table] +msgid "" +"Slicing Parameter Table\n" +"Did you know that you can view all objects/parts on a table and change " +"settings for each object/part?" +msgstr "" +"Bảng tham số slice\n" +"Bạn có biết rằng bạn có thể xem tất cả đối tượng/phần trên bảng và thay đổi " +"cài đặt cho từng đối tượng/phần không?" + +#: resources/data/hints.ini: [hint:Split to Objects/Parts] +msgid "" +"Split to Objects/Parts\n" +"Did you know that you can split a big object into small ones for easy " +"colorizing or printing?" +msgstr "" +"Chia thành đối tượng/phần\n" +"Bạn có biết rằng bạn có thể chia một đối tượng lớn thành các đối tượng nhỏ " +"để dễ tô màu hoặc in không?" + +#: resources/data/hints.ini: [hint:Subtract a Part] +msgid "" +"Subtract a Part\n" +"Did you know that you can subtract one mesh from another using the Negative " +"part modifier? That way you can, for example, create easily resizable holes " +"directly in Snapmaker Orca." +msgstr "" +"Trừ một phần\n" +"Bạn có biết rằng bạn có thể trừ một mesh từ mesh khác bằng cách sử dụng " +"modifier phần âm không? Theo cách đó, ví dụ, bạn có thể tạo lỗ dễ thay đổi " +"kích thước trực tiếp trong Snapmaker Orca." + +#: resources/data/hints.ini: [hint:STEP] +msgid "" +"STEP\n" +"Did you know that you can improve your print quality by slicing a STEP file " +"instead of an STL?\n" +"Snapmaker Orca supports slicing STEP files, providing smoother results than a " +"lower resolution STL. Give it a try!" +msgstr "" +"STEP\n" +"Bạn có biết rằng bạn có thể cải thiện chất lượng in bằng cách slice file " +"STEP thay vì STL không?\n" +"Snapmaker Orca hỗ trợ slice file STEP, cung cấp kết quả mịn hơn STL độ phân " +"giải thấp hơn. Hãy thử nó!" + +#: resources/data/hints.ini: [hint:Z seam location] +msgid "" +"Z seam location\n" +"Did you know that you can customize the location of the Z seam, and even " +"paint it on your print, to have it in a less visible location? This improves " +"the overall look of your model. Check it out!" +msgstr "" +"Vị trí đường nối Z\n" +"Bạn có biết rằng bạn có thể tùy chỉnh vị trí của đường nối Z, và thậm chí vẽ " +"nó trên bản in của bạn, để có nó ở vị trí ít nhìn thấy hơn không? Điều này " +"cải thiện vẻ ngoài tổng thể của model của bạn. Hãy xem nó!" + +#: resources/data/hints.ini: [hint:Fine-tuning for flow rate] +msgid "" +"Fine-tuning for flow rate\n" +"Did you know that flow rate can be fine-tuned for even better-looking " +"prints? Depending on the material, you can improve the overall finish of the " +"printed model by doing some fine-tuning." +msgstr "" +"Tinh chỉnh tốc độ lưu lượng\n" +"Bạn có biết rằng tốc độ lưu lượng có thể được tinh chỉnh để có bản in trông " +"tốt hơn không? Tùy thuộc vào vật liệu, bạn có thể cải thiện bề mặt hoàn " +"thiện tổng thể của model được in bằng cách thực hiện một số tinh chỉnh." + +#: resources/data/hints.ini: [hint:Split your prints into plates] +msgid "" +"Split your prints into plates\n" +"Did you know that you can split a model that has a lot of parts into " +"individual plates ready to print? This will simplify the process of keeping " +"track of all the parts." +msgstr "" +"Chia bản in thành các bản\n" +"Bạn có biết rằng bạn có thể chia model có nhiều phần thành các bản riêng lẻ " +"sẵn sàng in không? Điều này sẽ đơn giản hóa quy trình theo dõi tất cả các " +"phần." + +#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer +#: Height] +msgid "" +"Speed up your print with Adaptive Layer Height\n" +"Did you know that you can print a model even faster, by using the Adaptive " +"Layer Height option? Check it out!" +msgstr "" +"Tăng tốc bản in với chiều cao lớp thích ứng\n" +"Bạn có biết rằng bạn có thể in model nhanh hơn, bằng cách sử dụng tùy chọn " +"Chiều cao lớp thích ứng không? Hãy xem nó!" + +#: resources/data/hints.ini: [hint:Support painting] +msgid "" +"Support painting\n" +"Did you know that you can paint the location of your supports? This feature " +"makes it easy to place the support material only on the sections of the " +"model that actually need it." +msgstr "" +"Vẽ support\n" +"Bạn có biết rằng bạn có thể vẽ vị trí của support không? Tính năng này giúp " +"dễ dàng đặt vật liệu support chỉ trên các phần của model thực sự cần nó." + +#: resources/data/hints.ini: [hint:Different types of supports] +msgid "" +"Different types of supports\n" +"Did you know that you can choose from multiple types of supports? Tree " +"supports work great for organic models, while saving filament and improving " +"print speed. Check them out!" +msgstr "" +"Các loại support khác nhau\n" +"Bạn có biết rằng bạn có thể chọn từ nhiều loại support không? Support cây " +"hoạt động tuyệt vời cho model hữu cơ, đồng thời tiết kiệm filament và cải " +"thiện tốc độ in. Hãy xem chúng!" + +#: resources/data/hints.ini: [hint:Printing Silk Filament] +msgid "" +"Printing Silk Filament\n" +"Did you know that Silk filament needs special consideration to print it " +"successfully? Higher temperature and lower speed are always recommended for " +"the best results." +msgstr "" +"In filament lụa\n" +"Bạn có biết rằng filament lụa cần xem xét đặc biệt để in thành công không? " +"Nhiệt độ cao hơn và tốc độ thấp hơn luôn được khuyến nghị để có kết quả tốt " +"nhất." + +#: resources/data/hints.ini: [hint:Brim for better adhesion] +msgid "" +"Brim for better adhesion\n" +"Did you know that when printed models have a small contact interface with " +"the printing surface, it's recommended to use a brim?" +msgstr "" +"Vành để bám dính tốt hơn\n" +"Bạn có biết rằng khi model được in có giao diện tiếp xúc nhỏ với bề mặt in, " +"khuyến nghị sử dụng vành không?" + +#: resources/data/hints.ini: [hint:Set parameters for multiple objects] +msgid "" +"Set parameters for multiple objects\n" +"Did you know that you can set slicing parameters for all selected objects at " +"once?" +msgstr "" +"Đặt tham số cho nhiều đối tượng\n" +"Bạn có biết rằng bạn có thể đặt tham số slice cho tất cả đối tượng đã chọn " +"cùng lúc không?" + +#: resources/data/hints.ini: [hint:Stack objects] +msgid "" +"Stack objects\n" +"Did you know that you can stack objects as a whole one?" +msgstr "" +"Xếp chồng đối tượng\n" +"Bạn có biết rằng bạn có thể xếp chồng đối tượng thành một đối tượng nguyên " +"không?" + +#: resources/data/hints.ini: [hint:Flush into support/objects/infill] +msgid "" +"Flush into support/objects/infill\n" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" +msgstr "" +"Xả vào support/đối tượng/infill\n" +"Bạn có biết rằng bạn có thể tiết kiệm filament lãng phí bằng cách xả nó vào " +"support/đối tượng/infill trong khi thay filament không?" + +#: resources/data/hints.ini: [hint:Improve strength] +msgid "" +"Improve strength\n" +"Did you know that you can use more wall loops and higher sparse infill " +"density to improve the strength of the model?" +msgstr "" +"Cải thiện độ bền\n" +"Bạn có biết rằng bạn có thể sử dụng nhiều vòng thành hơn và mật độ infill " +"thưa cao hơn để cải thiện độ bền của model không?" + +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +msgid "" +"When do you need to print with the printer door opened?\n" +"Did you know that opening the printer door can reduce the probability of " +"extruder/hotend clogging when printing lower temperature filament with a " +"higher enclosure temperature? More info about this in the Wiki." +msgstr "" +"Khi nào bạn cần in với cửa máy in mở?\n" +"Bạn có biết rằng mở cửa máy in có thể giảm xác suất tắc extruder/hotend khi " +"in filament nhiệt độ thấp hơn với nhiệt độ vỏ bọc cao hơn không? Thêm thông " +"tin về điều này trong Wiki." + +#: resources/data/hints.ini: [hint:Avoid warping] +msgid "" +"Avoid warping\n" +"Did you know that when printing materials that are prone to warping such as " +"ABS, appropriately increasing the heatbed temperature can reduce the " +"probability of warping?" +msgstr "" +"Tránh cong vênh\n" +"Bạn có biết rằng khi in vật liệu dễ cong vênh như ABS, tăng nhiệt độ bàn " +"nóng một cách thích hợp có thể giảm xác suất cong vênh không?" + +#~ msgid "Junction Deviation calibration" +#~ msgstr "Hiệu chỉnh Junction Deviation" + +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "Extruder %d" + +#~ msgid "" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" +#~ msgstr "" +#~ "Độ lệch nút giao tối đa (M205 J, chỉ áp dụng nếu JD > 0 cho firmware " +#~ "Marlin)" + +#~ msgid "Adaptive layer height" +#~ msgstr "Chiều cao lớp thích ứng" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "" +#~ "Bật tùy chọn này có nghĩa là chiều cao lớp support cây ngoại trừ lớp đầu " +#~ "tiên sẽ được tính toán tự động." + +#~ msgid "Junction Deviation test" +#~ msgstr "Kiểm tra độ lệch nút giao" + +#~ msgid "Start junction deviation: " +#~ msgstr "Độ lệch nút giao bắt đầu: " + +#~ msgid "End junction deviation: " +#~ msgstr "Độ lệch nút giao kết thúc: " + +#~ msgid "Junction Deviation settings" +#~ msgstr "Cài đặt độ lệch nút giao" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "Lưu ý: Giá trị thấp hơn = góc sắc nét hơn nhưng tốc độ chậm hơn" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "(0 <= Junction Deviation < 1)" +#~ msgstr "" +#~ "Vui lòng nhập giá trị hợp lệ:\n" +#~ "(0 <= Độ lệch nút giao < 1)" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "LƯU Ý: Giá trị cao có thể gây dịch lớp" + +#~ msgid "AMS not connected" +#~ msgstr "AMS chưa kết nối" + +#~ msgid "Ext Spool" +#~ msgstr "Ext Spool" + +#~ msgid "Guide" +#~ msgstr "Hướng dẫn" + +#~ msgid "Calibrating AMS..." +#~ msgstr "Đang hiệu chỉnh AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "Có vấn đề xảy ra trong quá trình hiệu chỉnh. Nhấn để xem giải pháp." + +#~ msgid "Calibrate again" +#~ msgstr "Hiệu chỉnh lại" + +#~ msgid "Cancel calibration" +#~ msgstr "Hủy hiệu chỉnh" + +#~ msgid "Feed Filament" +#~ msgstr "Nạp filament" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "Cần cắm thẻ SD trước khi in qua LAN." + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "Cần cắm thẻ SD trước khi gửi đến máy in." + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "Lưu ý: Chỉ các khe AMS được nạp cùng loại vật liệu mới có thể chọn." + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Nếu có hai filament giống hệt nhau trong AMS, sao lưu filament AMS sẽ " +#~ "được bật.\n" +#~ "(Hiện đang hỗ trợ tự động cung cấp vật tư tiêu hao cùng thương hiệu, loại " +#~ "vật liệu, và màu)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS sẽ ước tính dung lượng còn lại của filament Bambu sau khi thông tin " +#~ "filament được cập nhật. Trong khi in, dung lượng còn lại sẽ được cập nhật " +#~ "tự động." + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "" +#~ "Nhiệt độ tối thiểu khuyến nghị nhỏ hơn 190°C hoặc nhiệt độ tối đa khuyến " +#~ "nghị lớn hơn 300°C.\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "Chế độ spiral chỉ hoạt động khi vòng wall là 1, support bị tắt, lớp shell " +#~ "trên là 0, mật độ infill thưa là 0 và loại timelapse là truyền thống." + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "Chế độ cơ học quét XY" + +#~ msgid "Paused due to filament runout" +#~ msgstr "Tạm dừng do hết filament" + +#~ msgid "Heating hotend" +#~ msgstr "Đang nung nóng hotend" + +#~ msgid "Calibrating extrusion" +#~ msgstr "Đang hiệu chỉnh đùn" + +#~ msgid "Printing was paused by the user" +#~ msgstr "In đã được tạm dừng bởi người dùng" + +#~ msgid "Pause of front cover falling" +#~ msgstr "Tạm dừng do nắp trước rơi" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "Đang hiệu chỉnh flow đùn" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "Tạm dừng do nhiệt độ vòi phun trục trặc" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "Tạm dừng do nhiệt độ đế nóng trục trặc" + +#~ msgid "Skip step pause" +#~ msgstr "Tạm dừng bỏ qua bước" + +#~ msgid "Motor noise calibration" +#~ msgstr "Hiệu chỉnh tiếng ồn động cơ" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "Tạm dừng do mất AMS" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "Tạm dừng do tốc độ thấp của quạt heat break" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "Tạm dừng do lỗi kiểm soát nhiệt độ buồng" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "Tạm dừng bởi G-code được chèn bởi người dùng" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "Tạm dừng do phát hiện filament che vòi phun" + +#~ msgid "Cutter error pause" +#~ msgstr "Tạm dừng do lỗi dao cắt" + +#~ msgid "First layer error pause" +#~ msgstr "Tạm dừng do lỗi lớp đầu tiên" + +#~ msgid "Nozzle clog pause" +#~ msgstr "Tạm dừng do tắc vòi phun" + +#~ msgid "Fatal" +#~ msgstr "Nghiêm trọng" + +#~ msgid "Serious" +#~ msgstr "Nghiêm trọng" + +#~ msgid "Common" +#~ msgstr "Thông thường" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "Nhiệt độ buồng hiện tại hoặc nhiệt độ buồng đích vượt quá 45℃. Để tránh " +#~ "tắc extruder, filament nhiệt độ thấp (PLA/PETG/TPU) không được phép nạp." + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "Filament nhiệt độ thấp (PLA/PETG/TPU) được nạp trong extruder. Để tránh " +#~ "tắc extruder, không được phép đặt nhiệt độ buồng trên 45℃." + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "Bambu PET-CF/PA6-CF không được hỗ trợ bởi AMS." + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "Một vật thể nằm vượt ra ngoài ranh giới plate hoặc vượt quá giới hạn " +#~ "chiều cao.\n" +#~ "Vui lòng giải quyết vấn đề bằng cách di chuyển nó hoàn toàn lên hoặc ra " +#~ "khỏi plate, và xác nhận rằng chiều cao nằm trong thể tích in." + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "Bạn có thể tìm thấy nó trong \"Cài đặt > Mạng > Mã kết nối\"\n" +#~ "trên máy in, như trong hình:" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "" +#~ "Duyệt file trong thẻ SD không được hỗ trợ trong firmware hiện tại. Vui " +#~ "lòng cập nhật firmware máy in." + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "Vui lòng kiểm tra xem thẻ SD đã được cắm vào máy in chưa.\n" +#~ "Nếu vẫn không thể đọc được, bạn có thể thử định dạng thẻ SD." + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "Duyệt file trong thẻ SD không được hỗ trợ ở Chế độ Chỉ LAN." + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "Bộ nhớ không khả dụng, hãy lắp thẻ SD." + +#~ msgid "Cham" +#~ msgstr "Buồng" + +#~ msgid "Still unload" +#~ msgstr "Vẫn tháo" + +#~ msgid "Still load" +#~ msgstr "Vẫn nạp" + +#~ msgid "Can't start this without SD card." +#~ msgstr "Không thể bắt đầu mà không có thẻ SD." + +#~ msgid "Update" +#~ msgstr "Cập nhật" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "Độ nhạy của tạm dừng là" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "" +#~ "Không có filament AMS. Vui lòng chọn máy in trong trang 'Thiết bị' để tải " +#~ "thông tin AMS." + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "Đồng bộ filament với AMS sẽ xóa tất cả preset filament và màu đã chọn " +#~ "hiện tại. Bạn có muốn tiếp tục?" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "" +#~ "Đã thực hiện đồng bộ, bạn có muốn chỉ đồng bộ thay đổi hay đồng bộ lại " +#~ "tất cả?" + +#~ msgid "Sync" +#~ msgstr "Đồng bộ" + +#~ msgid "Resync" +#~ msgstr "Đồng bộ lại" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "Có một số filament không xác định được ánh xạ vào preset chung. Vui lòng " +#~ "cập nhật Snapmaker Orca hoặc khởi động lại Snapmaker Orca để kiểm tra xem có " +#~ "cập nhật preset hệ thống không." + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "Bạn có chắc chắn muốn lưu các file SVG gốc với đường dẫn cục bộ của chúng " +#~ "vào file 3MF?\n" +#~ "Nếu bạn chọn 'KHÔNG', tất cả SVG trong dự án sẽ không thể chỉnh sửa được " +#~ "nữa." + +#~ msgid "Private protection" +#~ msgstr "Bảo vệ riêng tư" + +#~ msgid "General Settings" +#~ msgstr "Cài đặt chung" + +#~ msgid "Login Region" +#~ msgstr "Khu vực đăng nhập" + +#~ msgid "Stealth Mode" +#~ msgstr "Chế độ ẩn danh" + +#~ msgid "Use legacy network plugin (Takes effect after restarting Orca)" +#~ msgstr "Sử dụng plugin mạng cũ (Có hiệu lực sau khi khởi động lại Orca)" + +#~ msgid "Default Page" +#~ msgstr "Trang mặc định" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "Hiển thị thông báo \"Mẹo trong ngày\" sau khi khởi động" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "Nếu được bật, các gợi ý hữu ích sẽ được hiển thị khi khởi động." + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "Khối lượng xả: Tự động tính toán mỗi khi màu thay đổi." + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "Nếu được bật, tự động tính toán mỗi khi màu thay đổi." + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "Khối lượng xả: Tự động tính toán mỗi khi filament được thay đổi." + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "Nếu được bật, tự động tính toán mỗi khi filament được thay đổi" + +#~ msgid "Show the step mesh parameter setting dialog." +#~ msgstr "Hiển thị hộp thoại cài đặt tham số mesh step." + +#~ msgid "Multi-device Management (Take effect after restarting Snapmaker Orca)." +#~ msgstr "" +#~ "Quản lý nhiều thiết bị (Có hiệu lực sau khi khởi động lại Snapmaker Orca)." + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "Tự động sắp xếp bản sau khi nhân bản đối tượng" + +#~ msgid "Network" +#~ msgstr "Mạng" + +#~ msgid "User Sync" +#~ msgstr "Đồng bộ người dùng" + +#~ msgid "System Sync" +#~ msgstr "Đồng bộ hệ thống" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "Liên kết URL với Snapmaker Orca" + +#~ msgid "Load Behaviour" +#~ msgstr "Hành vi tải" + +#~ msgid "Add model files (STL/STEP) to recent file list." +#~ msgstr "Thêm file model (STL/STEP) vào danh sách file gần đây." + +#~ msgid "No warnings when loading 3MF with modified G-code" +#~ msgstr "Không cảnh báo khi tải 3MF với G-code đã chỉnh sửa" + +#~ msgid "Auto-Backup" +#~ msgstr "Sao lưu tự động" + +#~ msgid "every" +#~ msgstr "mỗi" + +#~ msgid "Downloads" +#~ msgstr "Tải xuống" + +#~ msgid "Dark Mode" +#~ msgstr "Chế độ tối" + +#~ msgid "Enable Dark mode" +#~ msgstr "Bật chế độ tối" + +#~ msgid "Home page and daily tips" +#~ msgstr "Trang chủ và mẹo hàng ngày" + +#~ msgid "Show home page on startup" +#~ msgstr "Hiển thị trang chủ khi khởi động" + +#~ msgid "Please choose the filament color" +#~ msgstr "Vui lòng chọn màu filament" + +#~ msgid "Send print job to" +#~ msgstr "Gửi công việc in đến" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament %s vượt quá số khe AMS. Vui lòng cập nhật firmware máy in để hỗ " +#~ "trợ gán khe AMS." + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "Filament vượt quá số khe AMS. Vui lòng cập nhật firmware máy in để hỗ trợ " +#~ "gán khe AMS." + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "Ánh xạ filament đến khe AMS đã được thiết lập. Bạn có thể nhấp vào " +#~ "filament ở trên để thay đổi khe AMS ánh xạ của nó" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "" +#~ "Vui lòng nhấp vào mỗi filament ở trên để chỉ định khe AMS ánh xạ của nó " +#~ "trước khi gửi công việc in" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "Firmware máy in chỉ hỗ trợ ánh xạ tuần tự filament => khe AMS." + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "Cần phải lắp thẻ SD trước khi in." + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "Cần phải lắp thẻ SD để ghi timelapse." + +#, c-format, boost-format +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "đầu phun trong preset: %.1f %s" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "đầu phun đã nhớ: %.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "Đường kính đầu phun trong file đã slice không nhất quán với đầu phun đã " +#~ "nhớ. Nếu bạn đã thay đổi đầu phun gần đây, vui lòng vào Thiết bị > Phụ " +#~ "kiện máy in để thay đổi cài đặt." + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "In vật liệu nhiệt độ cao (vật liệu %s) với %s có thể gây hư hỏng đầu phun" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "Đang kết nối với máy in. Không thể hủy trong quá trình kết nối." + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "" +#~ "Thận trọng khi sử dụng! Hiệu chỉnh lưu lượng trên bản Textured PEI có thể " +#~ "thất bại do bề mặt phân tán." + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "Hiệu chỉnh lưu lượng tự động bằng Micro Lidar" + +#~ msgid "Send to Printer SD card" +#~ msgstr "Gửi đến thẻ SD máy in" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "Cần phải lắp thẻ SD trước khi gửi đến thẻ SD máy in." + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "Máy in không hỗ trợ gửi đến thẻ SD máy in." + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "Số lượng màu nên nằm trong khoảng [%d, %d]." + +#~ msgid "Current filament colors:" +#~ msgstr "Màu filament hiện tại:" + +#~ msgid "Quick set:" +#~ msgstr "Đặt nhanh:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "Thêm extruder tiêu hao sau các extruder hiện có." + +#~ msgid "Cluster colors" +#~ msgstr "Nhóm màu" + +#~ msgid "Map Filament" +#~ msgstr "Ánh xạ filament" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "Lưu ý: Màu đã được chọn, bạn có thể chọn OK \n" +#~ "để tiếp tục hoặc điều chỉnh thủ công." + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "" +#~ "Cảnh báo: Số lượng extruder mới thêm và \n" +#~ "hiện tại vượt quá 16." + +#~ msgid "Auto-Calc" +#~ msgstr "Tính tự động" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca sẽ tính lại khối lượng xả của bạn mỗi khi màu filament thay đổi. Bạn " +#~ "có thể tắt tính toán tự động trong Snapmaker Orca > Tùy chọn" + +#~ msgid "unloaded" +#~ msgstr "đã tháo" + +#~ msgid "loaded" +#~ msgstr "đã nạp" + +#~ msgid "Filament #" +#~ msgstr "Filament #" + +#~ msgid "From" +#~ msgstr "Từ" + +#~ msgid "To" +#~ msgstr "Đến" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "Tiếp tục in (chấp nhận khuyết điểm)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "Tiếp tục in (đã giải quyết vấn đề)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "" +#~ "Bước 1. Vui lòng xác nhận Snapmaker Orca và máy in của bạn đang trong cùng " +#~ "LAN." + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Bước 2. Nếu IP và mã truy cập bên dưới khác với giá trị thực tế trên máy " +#~ "in của bạn, vui lòng sửa chúng." + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "Bước 3. Vui lòng lấy SN thiết bị từ phía máy in; thường được tìm thấy " +#~ "trong thông tin thiết bị trên màn hình máy in." + +#~ msgid "Laser 10 W" +#~ msgstr "Laser 10 W" + +#~ msgid "Laser 40 W" +#~ msgstr "Laser 40 W" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr " quá gần các đối tượng khác, có thể có va chạm khi in." + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "Không thể in nhiều filament có sự chênh lệch nhiệt độ lớn cùng lúc. Nếu " +#~ "không, extruder và đầu phun có thể bị tắc hoặc hư hỏng trong khi in." + +#~ msgid "Ironing angle" +#~ msgstr "Góc ủi" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "" +#~ "Góc mà ủi được thực hiện. Số âm vô hiệu hóa chức năng này và sử dụng " +#~ "phương pháp mặc định." + +#~ msgid "Remove small overhangs" +#~ msgstr "Loại bỏ phần nhô nhỏ" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "Loại bỏ phần nhô nhỏ có thể không cần support." + +#~ msgid "Width of the brim." +#~ msgstr "Độ rộng của vành." + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "" +#~ "Chỉ một trong các kết quả có cùng tên sẽ được lưu. Bạn có chắc chắn muốn " +#~ "ghi đè các kết quả khác không?" + +#~ msgid "External Spool" +#~ msgstr "Cuộn ngoài" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "Vui lòng nhập giá trị hợp lệ:\n" +#~ "Nhiệt độ bắt đầu: <= 350\n" +#~ "Nhiệt độ kết thúc: >= 170\n" +#~ "Nhiệt độ bắt đầu > Nhiệt độ kết thúc + 5" + +#~ msgid "" +#~ "Recommended: Set Damp to 0.\n" +#~ "This will use the printer's default or the last saved value." +#~ msgstr "" +#~ "Khuyến nghị: Đặt giảm chấn thành 0.\n" +#~ "Điều này sẽ sử dụng mặc định của máy in hoặc giá trị được lưu lần cuối." + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "Máy in tùy chỉnh hoặc model không được nhập, vui lòng nhập." + +#~ msgid "BigTraffic" +#~ msgstr "BigTraffic" + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "đầu phun trong cài đặt sẵn: %s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "" +#~ "Đường kính đầu phun trong cài đặt sẵn không nhất quán với đường kính đầu " +#~ "phun được ghi nhớ. Bạn có thay đổi đầu phun gần đây không?" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*In vật liệu %s với %s có thể gây hư hỏng đầu phun" \ No newline at end of file diff --git a/localization/i18n/zh_CN/Snapmaker_Orca_zh_CN.po b/localization/i18n/zh_CN/Snapmaker_Orca_zh_CN.po index ef17449c00..7d85b293d7 100644 --- a/localization/i18n/zh_CN/Snapmaker_Orca_zh_CN.po +++ b/localization/i18n/zh_CN/Snapmaker_Orca_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" "PO-Revision-Date: 2024-07-28 07:12+0000\n" "Last-Translator: Handle \n" "Language-Team: \n" @@ -17,14 +17,117 @@ msgstr "" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 3.2.2\n" -msgid "Add Device" -msgstr "添加设备" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Supports Painting" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "AMS不支持TPU。" + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "潮湿的PVA会变得柔软并粘在AMS内，请在使用前注意干燥。" + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "CF/GF耗材丝丝又硬又脆，在AMS中很容易断裂或卡住，请谨慎使用。" + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "当前AMS湿度" + +msgid "Humidity" +msgstr "湿度" + +msgid "Temperature" +msgstr "温度" + +msgid "Left Time" +msgstr "剩余时间" + +msgid "Drying" +msgstr "烘干" + +msgid "Idle" +msgstr "空闲" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "序列号：" + +msgid "Version:" +msgstr "版本：" + +msgid "Latest version" +msgstr "最新版本" + +msgid "Support Painting" msgstr "支撑绘制" -msgid "Alt + Mouse wheel" -msgstr "Alt + 鼠标滚轮" +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "Alt+" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "鼠标滚轮" msgid "Section view" msgstr "剖面视图" @@ -32,9 +135,6 @@ msgstr "剖面视图" msgid "Reset direction" msgstr "重置方向" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + 鼠标滚轮" - msgid "Pen size" msgstr "画笔尺寸" @@ -50,9 +150,6 @@ msgstr "鼠标右键" msgid "Block supports" msgstr "屏蔽支撑" -msgid "Shift + Left mouse button" -msgstr "Shift + 鼠标左键" - msgid "Erase" msgstr "擦除" @@ -116,7 +213,7 @@ msgstr "选择底面" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "" "耗材丝数量超过涂色工具支持的最大值，仅前%1%个耗材丝可在涂色工具中使用。" @@ -157,12 +254,21 @@ msgstr "批量填充" msgid "Height range" msgstr "高度范围" -msgid "Alt + Shift + Enter" -msgstr "" +msgid "Enter" +msgstr "Enter" msgid "Toggle Wireframe" msgstr "显示/隐藏线框" +msgid "Remap filaments" +msgstr "重映射耗材丝" + +msgid "Remap" +msgstr "重映射" + +msgid "Cancel" +msgstr "取消" + msgid "Shortcut Key " msgstr "快捷键 " @@ -185,9 +291,33 @@ msgstr "移除已绘制的颜色" msgid "Painted using: Filament %1%" msgstr "绘制使用：耗材丝%1%" +msgid "Filament remapping finished." +msgstr "耗材丝重新映射完成" + +msgid "Paint-on fuzzy skin" +msgstr "手绘绒毛表面" + +msgid "Brush size" +msgstr "画刷尺寸" + +msgid "Brush shape" +msgstr "画刷形状" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" + msgid "Move" msgstr "移动" +msgid "Please select at least one object." +msgstr "请至少选中一个对象。" + msgid "Gizmo-Move" msgstr "Gizmo-移动" @@ -218,14 +348,20 @@ msgstr "在" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "零件选择" + +msgid "Fixed step drag" +msgstr "固定拖动步长" + +msgid "Single sided scaling" +msgstr "单面缩放" + msgid "Position" msgstr "位置" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "旋转" +msgid "Rotate (relative)" +msgstr "旋转（相对）" msgid "Scale ratios" msgstr "缩放比例" @@ -242,9 +378,6 @@ msgstr "平移" msgid "Group Operations" msgstr "组操作" -msgid "Set Position" -msgstr "设置位置" - msgid "Set Orientation" msgstr "设置方向" @@ -257,22 +390,31 @@ msgstr "重置位置" msgid "Reset Rotation" msgstr "重置旋转" -msgid "World coordinates" -msgstr "世界坐标" - msgid "Object coordinates" msgstr "物体坐标" -msgid "°" -msgstr "°" +msgid "World coordinates" +msgstr "世界坐标" + +msgid "Translate(Relative)" +msgstr "" + +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "重置当前旋转为打开旋转工具时的值" + +msgid "Rotate (absolute)" +msgstr "旋转（绝对）" + +msgid "Reset current rotation to real zeros." +msgstr "重置当前旋转为真实零位" + +msgid "Part coordinates" +msgstr "零件坐标" #. TRN - Input label. Be short as possible msgid "Size" msgstr "大小" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "等比例缩放" @@ -336,6 +478,12 @@ msgstr "形状" msgid "Depth" msgstr "深度" +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "旋转" + msgid "Groove" msgstr "凹槽" @@ -425,20 +573,17 @@ msgid "Bulge" msgstr "凸度" msgid "Bulge proportion related to radius" -msgstr "" +msgstr "与半径相关的凸起比例" msgid "Space" msgstr "间隔" msgid "Space proportion related to radius" -msgstr "" +msgstr "与半径相关的间隔比例" msgid "Confirm connectors" msgstr "确认" -msgid "Cancel" -msgstr "取消" - msgid "Build Volume" msgstr "零件体积" @@ -589,14 +734,10 @@ msgstr "%d 个三角形" msgid "Show wireframe" msgstr "显示线框" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "处理预览的过程中无法应用。" -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "操作已在取消中，请等待片刻。" msgid "Face recognition" @@ -605,12 +746,6 @@ msgstr "外观面检测" msgid "Perform Recognition" msgstr "执行检测" -msgid "Brush size" -msgstr "画刷尺寸" - -msgid "Brush shape" -msgstr "画刷形状" - msgid "Enforce seam" msgstr "添加Z缝" @@ -647,7 +782,7 @@ msgid "Angle" msgstr "角度" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "内嵌深度" @@ -660,8 +795,8 @@ msgstr "附着曲面" msgid "Horizontal text" msgstr "水平文字" -msgid "Shift + Mouse move up or down" -msgstr "Shift + 鼠标上移或下移" +msgid "Mouse move up or down" +msgstr "鼠标上移或下移" msgid "Rotate text" msgstr "旋转文字" @@ -705,7 +840,7 @@ msgid "ITALIC" msgstr "斜体" msgid "SWISS" -msgstr "" +msgstr "瑞士体" msgid "MODERN" msgstr "现代" @@ -746,7 +881,7 @@ msgid "Too small, enlarged font height inside text input." msgstr "文字输入里面的字体高度太小，放大了。" msgid "Text doesn't show current horizontal alignment." -msgstr "" +msgstr "文本不显示当前水平对齐方式" msgid "Revert font changes." msgstr "还原字体更改。" @@ -784,7 +919,7 @@ msgid "Change Text Type" msgstr "更改文本类型" #, boost-format -msgid "Rename style(%1%) for embossing text" +msgid "Rename style (%1%) for embossing text" msgstr "重命名浮雕文本的样式（%1%）" msgid "Name can't be empty." @@ -977,7 +1112,7 @@ msgstr "文字中心到模型曲面的距离。" msgid "Undo rotation" msgstr "撤消旋转" -msgid "Rotate text Clock-wise." +msgid "Rotate text Clockwise." msgstr "顺时针旋转文本。" msgid "Unlock the text's rotation when moving text along the object's surface." @@ -995,10 +1130,14 @@ msgstr "文字面向摄像头" msgid "Orient the text towards the camera." msgstr "选择文字使其面向摄像头" +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "字体\"%1%\"无法使用，请选择其他字体" + #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" "不能加载完全相同的字体(\"%1%\")。应用程序选择了一种类似的字体（\"%2%\"）。你" "必须为启用编辑文本指定字体。" @@ -1010,7 +1149,7 @@ msgid "Loading" msgstr "载入中" msgid "In queue" -msgstr "" +msgstr "队列中" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent @@ -1079,13 +1218,13 @@ msgid "SVG move" msgstr "移动SVG图形" msgid "Enter SVG gizmo" -msgstr "" +msgstr "进入SVG小工具" msgid "Leave SVG gizmo" -msgstr "" +msgstr "离开SVG小工具" msgid "SVG actions" -msgstr "" +msgstr "SVG操作" msgid "SVG" msgstr "SVG矢量图" @@ -1108,27 +1247,27 @@ msgid "Radial gradient" msgstr "径向渐变" msgid "Open filled path" -msgstr "" +msgstr "打开填充路径" msgid "Undefined stroke type" msgstr "未定义的描边类型" -msgid "Path can't be healed from selfintersection and multiple points." -msgstr "" +msgid "Path can't be healed from self-intersection and multiple points." +msgstr "路径无法从自相交和多点中修复" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." -msgstr "" +msgstr "最终形状包含自相交或相同坐标的多点" #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "形状已被标记为不可见 (%1%)." -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "" +msgstr "形状填充（%1%）包含不受支持的：%2%。" #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." @@ -1136,7 +1275,7 @@ msgstr "形状 (%1%) 的描边太细了（不小于 %2% mm）。" #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "" +msgstr "形状笔划（%1%）包含不受支持的：%2%。" msgid "Face the camera" msgstr "面向摄像机" @@ -1153,26 +1292,29 @@ msgid "Reload SVG file from disk." msgstr "从磁盘重新加载SVG文件。" msgid "Change file" -msgstr "" +msgstr "改变文件" -msgid "Change to another .svg file" -msgstr "" +#, fuzzy +msgid "Change to another SVG file." +msgstr "更改为另一个.svg文件" msgid "Forget the file path" -msgstr "" +msgstr "忘记文件路径" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" +"请勿将本地路径保存到3MF文件中。\n" +"同时禁用'从磁盘重新加载'选项。" #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" -msgstr "" +msgstr "烘焙" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "" +msgstr "将模型烘焙为不可编辑的部分" msgid "Save as" msgstr "另存为" @@ -1180,40 +1322,41 @@ msgstr "另存为" msgid "Save SVG file" msgstr "保存SVG文件" -msgid "Save as '.svg' file" +#, fuzzy +msgid "Save as SVG file." msgstr "另存为“.svg”文件" msgid "Size in emboss direction." -msgstr "" +msgstr "浮雕方向上的大小" #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" -msgstr "" +msgstr "缩放也会改变曲线样本的数量（%1%）" msgid "Width of SVG." -msgstr "" +msgstr "SVG宽度" msgid "Height of SVG." -msgstr "" +msgstr "SVG高度" msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "" +msgstr "锁定/解锁SVG的宽高比。" msgid "Reset scale" msgstr "重置缩放" msgid "Distance of the center of the SVG to the model surface." -msgstr "" +msgstr "SVG中心到模型表面的距离。" msgid "Reset distance" -msgstr "" +msgstr "重置距离" msgid "Reset rotation" msgstr "重置旋转" msgid "Lock/unlock rotation angle when dragging above the surface." -msgstr "" +msgstr "在曲面上方拖动时锁定/解锁旋转角度。" msgid "Mirror vertically" msgstr "垂直镜像" @@ -1223,7 +1366,7 @@ msgstr "水平镜像" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" -msgstr "" +msgstr "改变SVG类型" #. TRN - Input label. Be short as possible msgid "Mirror" @@ -1248,6 +1391,9 @@ msgstr "Nano SVG解析器无法从文件中加载 (%1%)。" msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG文件不包含路径以进行浮雕操作 (%1%)。" +msgid "No feature" +msgstr "无特征" + msgid "Vertex" msgstr "顶点" @@ -1272,9 +1418,6 @@ msgstr "边的中心" msgid "Center of circle" msgstr "圆心" -msgid "ShiftLeft mouse button" -msgstr "Shift + 鼠标左键" - msgid "Select feature" msgstr "选择特征" @@ -1290,18 +1433,22 @@ msgstr "重新选择" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "取消选择" +msgid "Cancel a feature until exit" +msgstr "取消一个特征直到退出" msgid "Measure" msgstr "测量" +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "请确保爆炸比例为1，且至少选择一个对象" + msgid "Edit to scale" msgstr "编辑比例" msgctxt "Verb" -msgid "Scale" -msgstr "比例" +msgid "Scale all" +msgstr "缩放全部" msgid "None" msgstr "无" @@ -1315,6 +1462,46 @@ msgstr "长度" msgid "Selection" msgstr "选中" +msgid " (Moving)" +msgstr "(活动的)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "" +"在两个物体上选择两个面 \n" +"并将物体组合在一起。" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "" +"在两个物体上选择两个点或圆 \n" +"并指定它们之间的距离。" + +msgid "Face" +msgstr "面" + +msgid " (Fixed)" +msgstr "(固定的)" + +msgid "Point" +msgstr "点" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "特征1已经被重置，特征2变成特征1" + +msgid "Warning: please select Plane's feature." +msgstr "警告:请选择面特征。" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "警告:请选择点或圆特征。" + +msgid "Warning: please select two different meshes." +msgstr "警告:请选择两个不同的网格。" + msgid "Copy to clipboard" msgstr "复制到剪贴板" @@ -1330,8 +1517,26 @@ msgstr "直线距离" msgid "Distance XYZ" msgstr "距离 XYZ" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "平行" + +msgid "Center coincidence" +msgstr "中心重合" + +msgid "Feature 1" +msgstr "特征1" + +msgid "Reverse rotation" +msgstr "反转方向" + +msgid "Rotate around center:" +msgstr "绕中心旋转:" + +msgid "Parallel distance:" +msgstr "平行距离：" + +msgid "Flip by Face 2" +msgstr "通过面2翻转" msgid "Notice" msgstr "通知" @@ -1344,7 +1549,7 @@ msgid "%1% was replaced with %2%" msgstr "%1%已被%2%替换" msgid "The configuration may be generated by a newer version of Snapmaker Orca." -msgstr "此配置可能由新版本的Snapmaker Orca生成" +msgstr "此配置可能由新版本的逆戟鲸生成" msgid "Some values have been replaced. Please check them:" msgstr "部分数值已被替换，请检查：" @@ -1366,8 +1571,11 @@ msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "配置文件“%1%”已被加载，但部分数值未被识别。" +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "基于PrusaSlicer和BambuStudio" + msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" "系统内存耗尽，Snapmaker Orca 即将终止运行。这可能是个缺陷，希望您可以报告此问题，" @@ -1417,6 +1625,10 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 运行库" +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "资源路径不存在或不是目录：%s" + #, c-format, boost-format msgid "" "%s\n" @@ -1434,7 +1646,7 @@ msgid "Click to download new version in default browser: %s" msgstr "在默认浏览器中点击下载最新版本: %s" msgid "The Snapmaker Orca needs an upgrade" -msgstr "Snapmaker Orca需要进行升级" +msgstr "逆戟鲸需要进行升级" msgid "This is the newest version." msgstr "已经是最新版本。" @@ -1461,26 +1673,26 @@ msgstr "加载当前预设" msgid "Loading a mode view" msgstr "加载模式视图" -msgid "Choose one file (3mf):" -msgstr "选择一个文件（3mf）：" +msgid "Choose one file (3MF):" +msgstr "选择一个文件（3MF）：" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "选择一个或多个文件(3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "选择一个或多个文件(3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "选择一个或多个文件（3mf/step/stl/svg/obj/amf）：" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "选择一个或多个文件（3mf/step/STL/svg/obj/amf）：" msgid "Choose ZIP file" msgstr "选择ZIP文件" -msgid "Choose one file (gcode/3mf):" -msgstr "选择一个文件（gcode/3mf）：" +msgid "Choose one file (GCODE/3MF):" +msgstr "选择一个文件（GCODE/3MF）：" msgid "Some presets are modified." msgstr "预设已被修改。" msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." msgstr "您可以保留未保存修改的预设应用到新项目中，或者选择忽略。" @@ -1495,8 +1707,8 @@ msgstr "打开项目" msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" -msgstr "Snapmaker Orca版本过低，需要更新到最新版本方可正常使用" +"version before it can be used normally." +msgstr "逆戟鲸版本过低，需要更新到最新版本方可正常使用" msgid "Privacy Policy Update" msgstr "隐私协议更新" @@ -1557,10 +1769,10 @@ msgid "Rename" msgstr "重命名" msgid "Snapmaker Orca GUI initialization failed" -msgstr "Snapmaker Orca图形界面初始化失败" +msgstr "逆戟鲸图形界面初始化失败" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "致命错误，捕获到异常：%1%" msgid "Quality" @@ -1575,42 +1787,6 @@ msgstr "填充" msgid "Support" msgstr "支撑" -msgid "Import Profile" -msgstr "导入预设包" - -msgid "Import Web Resource" -msgstr "导入web资源包" - -msgid "Merge with" -msgstr "合并到" - -msgid "The following profiles could not be imported due to outdated versions." -msgstr "以下预设由于版本较低，未被导入" - -msgid "This web resouce could not be imported due to outdated versions." -msgstr "该web资源包由于版本较低，未被导入" - -msgid "Import Failed" -msgstr "导入失败" - -msgid "Please choose a system profile package file:" -msgstr "请选择系统预设包：" - -msgid "Please choose a web resource package file:" -msgstr "请选择web资源包：" - -msgid "Updating the web resources requires application restart." -msgstr "当前需要重启以使web资源包生效" - -msgid "Updating the system resources requires application restart." -msgstr "当前需要重启以使预设生效" - -msgid "Print Preprocessing" -msgstr "打印预处理" - -msgid "Pretreat the uploaded content" -msgstr "上传预处理" - msgid "Flush options" msgstr "换料冲刷选项" @@ -1626,12 +1802,18 @@ msgstr "顶部实心层" msgid "Top Minimum Shell Thickness" msgstr "顶部外壳最小厚度" +msgid "Top Surface Density" +msgstr "顶面密度" + msgid "Bottom Solid Layers" msgstr "底部实心层" msgid "Bottom Minimum Shell Thickness" msgstr "底部外壳最小厚度" +msgid "Bottom Surface Density" +msgstr "底面密度" + msgid "Ironing" msgstr "熨烫" @@ -1675,13 +1857,13 @@ msgid "Add text modifier" msgstr "添加文本修改器" msgid "Add SVG part" -msgstr "" +msgstr "添加svg零件" msgid "Add negative SVG" -msgstr "" +msgstr "添加负零件SVG" msgid "Add SVG modifier" -msgstr "" +msgstr "添加SVG修改器" msgid "Select settings" msgstr "选择设置" @@ -1698,6 +1880,9 @@ msgstr "删除" msgid "Delete the selected object" msgstr "删除所选对象" +msgid "Backspace" +msgstr "回退键" + msgid "Load..." msgstr "加载..." @@ -1719,6 +1904,9 @@ msgstr "环面" msgid "Orca Cube" msgstr "Orca逆方块" +msgid "Orca Tolerance Test" +msgstr "Orca误差测试" + msgid "3DBenchy" msgstr "小船" @@ -1736,14 +1924,14 @@ msgstr "Orca拉丝地狱" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "该模型顶面具有文字浮雕。\n" -"为了获得最佳效果，我们推荐您将“单层墙阈值”设置为 0 " -"以使“仅首层单层墙”效果最佳。\n" +"为了获得最佳效果，我们推荐您将“单层墙阈值”设置为 0 以使“仅首层单层墙”效果最" +"佳。\n" "\n" "自动调整这些设置？\n" "是 - 自动调整这些设置\n" @@ -1797,6 +1985,12 @@ msgstr "替换为STL" msgid "Replace the selected part with new STL" msgstr "用新的STL替换选中的零件" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "更换耗材丝" @@ -1834,16 +2028,16 @@ msgstr "冲刷到对象的支撑" msgid "Edit in Parameter Table" msgstr "在参数表格中编辑" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "从英寸转换" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "恢复到英寸" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "从米转换" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "恢复到米" msgid "Assemble" @@ -1930,9 +2124,18 @@ msgstr "拆分所选对象" msgid "Auto orientation" msgstr "自动朝向" -msgid "Auto orient the object to improve print quality." +msgid "Auto orient the object to improve print quality" msgstr "自动调整对象朝向以提高打印质量。" +msgid "Edit" +msgstr "编辑" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" + msgid "Select All" msgstr "全选" @@ -1955,7 +2158,7 @@ msgid "Reload All" msgstr "重新加载全部" msgid "reload all from disk" -msgstr "" +msgstr "从磁盘重新加载全部" msgid "Auto Rotate" msgstr "自动朝向" @@ -1969,6 +2172,30 @@ msgstr "删除盘" msgid "Remove the selected plate" msgstr "删除所选盘" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "克隆" @@ -1978,9 +2205,18 @@ msgstr "简化模型" msgid "Center" msgstr "居中" +msgid "Drop" +msgstr "下降" + msgid "Edit Process Settings" msgstr "编辑工艺参数" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "编辑单个对象的打印参数" @@ -2023,8 +2259,8 @@ msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d 非流形边" -msgid "Right click the icon to fix model object" -msgstr "右键点击此图标可修复模型对象" +msgid "Click the icon to repair model object" +msgstr "点击图标修复模型对象" msgid "Right button click the icon to drop the object settings" msgstr "右键点击此图标以舍弃对象的设置" @@ -2070,6 +2306,9 @@ msgid "" "objects." msgstr "切换到对象设置模式，以编辑所选对象的工艺参数" +msgid "Remove paint-on fuzzy skin" +msgstr "移除手绘绒毛表面" + msgid "Delete connector from object which is a part of cut" msgstr "删除的连接件属于切割对象的一部分" @@ -2086,10 +2325,10 @@ msgstr "为保证切割关系，您可以将所有关联对象的连接件一起 msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" "该行为将破坏切割关系，在此之后将无法保证模型一致性。\n" "\n" @@ -2101,8 +2340,8 @@ msgstr "删除所有连接件" msgid "Deleting the last solid part is not allowed." msgstr "不允许删除对象的最后一个实体零件。" -msgid "The target object contains only one part and can not be splited." -msgstr "目标对象仅包含一个零件，无法被拆分。" +msgid "The target object contains only one part and can not be split." +msgstr "目标对象只包含一个零件，无法分割" msgid "Assembly" msgstr "组合体" @@ -2144,12 +2383,12 @@ msgid "Selection conflicts" msgstr "选择冲突" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "如果第一个选择的是对象，那么第二个选择的也必须是对象。" msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "如果第一个选择的是零件，那么第二个选择的也必须是同一个对象中的零件。" msgid "The type of the last solid object part is not to be changed." @@ -2208,7 +2447,7 @@ msgstr "数值错误。" msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "一个单元格仅能被复制到同一列的一个或多个单元格" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "不支持多个单元格的复制" msgid "Outside" @@ -2229,6 +2468,9 @@ msgstr "自动Brim" msgid "Mouse ear" msgstr "圆盘" +msgid "Painted" +msgstr "绘制" + msgid "Outer brim only" msgstr "仅外侧" @@ -2379,53 +2621,131 @@ msgstr "请检查打印机和工作室的网络连接" msgid "Connecting..." msgstr "连接中..." -msgid "?" -msgstr "?" - -msgid "/" +msgid "Auto-refill" msgstr "" -msgid "Empty" -msgstr "空" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "自动补给" - -msgid "AMS not connected" -msgstr "AMS 未连接" - msgid "Load" msgstr "进料" msgid "Unload" msgstr "退料" -msgid "Ext Spool" -msgstr "外挂料卷" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "选择1个AMS槽位，然后点击进料/退料按钮以自动进料/退料。" -msgid "Tips" -msgstr "提示" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Guide" -msgstr "引导" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" -msgid "Retry" -msgstr "重试" +msgid "Change Anyway" +msgstr "" -msgid "Calibrating AMS..." -msgstr "正在校准AMS..." +msgid "Off" +msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "校准过程遇到问题。点击查看解决方案。" +msgid "Filter" +msgstr "过滤" -msgid "Calibrate again" -msgstr "重新校准" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" -msgid "Cancel calibration" -msgstr "取消校准" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "冷却" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "上" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "辅助" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "空闲..." @@ -2442,42 +2762,37 @@ msgstr "抽回耗材丝" msgid "Push new filament into extruder" msgstr "送出新的耗材丝到挤出机" +msgid "Grab new filament" +msgstr "咬入耗材丝" + msgid "Purge old filament" msgstr "冲刷旧耗材丝" -msgid "Feed Filament" -msgstr "送料" - msgid "Confirm extruded" msgstr "确认挤出" msgid "Check filament location" msgstr "检查耗材丝位置" -msgid "Grab new filament" -msgstr "咬入耗材丝" +msgid "The maximum temperature cannot exceed " +msgstr "" + +msgid "The minmum temperature should not be less than " +msgstr "" msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." -msgstr "选择1个AMS槽位，然后点击进料/退料按钮以自动进料/退料。" - -msgid "Edit" -msgstr "编辑" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." msgstr "" "所有选中的对象都处于被锁定的盘上，\n" "无法对这些对象做自动摆盘。" -msgid "No arrangable objects are selected." +msgid "No arrangeable objects are selected." msgstr "没有可摆盘的对象被选中。" msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." +"This plate is locked.\n" +"Cannot auto-arrange on this plate." msgstr "该盘处于锁定状态，无法对其进行自动摆盘。" msgid "Arranging..." @@ -2510,15 +2825,15 @@ msgstr "" "%s" msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "所有选中的对象都处于被锁定的盘上，\n" "无法对这些对象做自动朝向。" msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "该盘处于锁定状态，\n" "无法对其进行自动朝向。" @@ -2571,7 +2886,7 @@ msgstr "上传任务超时，请排查网络状态后重试。" msgid "Cloud service connection failed. Please try again." msgstr "云服务连接失败，请重试" -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "未找到打印文件，请重新切片。" msgid "" @@ -2594,7 +2909,7 @@ msgid "" "again." msgstr "打印文件的大小过大，请调整文件大小后重试。" -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "未找到打印文件，请重新切片后再发送打印。" msgid "" @@ -2628,21 +2943,58 @@ msgstr "已发送完成，即将自动跳转到设备页面（%s秒）" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "已成功发送。将自动跳转到%ss中的下一页。" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "需要插入SD卡后方可发送局域网打印" +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "访问码：%s IP地址：%s" -msgid "Sending gcode file over LAN" -msgstr "通过局域网发送gcode文件" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" -msgid "Sending gcode file to sdcard" -msgstr "发送gcode文件到sd卡" +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +msgid "Sending G-code file over LAN" +msgstr "通过局域网发送G-code文件" + +msgid "Sending G-code file to SD card" +msgstr "发送G-code文件到SD卡" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "成功发送。即将关闭当前页面（%s秒）" -msgid "An SD card needs to be inserted before sending to printer." -msgstr "需要插入SD卡后方可发送到打印机。" +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "导入SLA存档" @@ -2679,10 +3031,10 @@ msgstr "下载中" msgid "Download failed" msgstr "下载失败" -msgid "Cancelled" +msgid "Canceled" msgstr "已取消" -msgid "Install successfully." +msgid "Installed successfully" msgstr "安装成功。" msgid "Installing" @@ -2691,25 +3043,6 @@ msgstr "安装中" msgid "Install failed" msgstr "安装失败" -# snapmaker orca beta -msgid "Note: The firmware version of SnapmakerU1 should be no less than" -msgstr "提示：建议SnapmakerU1 固件版本不低于" - -msgid "Snapmaker Orca beta is forked from Orca Slicer by SoftFever." -msgstr "Snapmaker Orca beta 基于 SoftFever 的 Orca Slicer开发。" - -msgid "OrcaSlicer is forked from Bambu Studio by Bambu Lab." -msgstr "Orca Slicer 基于 Bambu Lab 的 Bambu Studio 开发而来。" - -msgid "Bambu Studio is forked from PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community. Orca Slicer incorporates a lot of features from SuperSlicer by @supermerill." -msgstr "Bambu Studio 基于 Prusa Research 的 PrusaSlicer 开发而来，而 PrusaSlicer 又是基于 Alessandro Ranellucci 和 RepRap 社区的 Slic3r进行开发。Orca Slicer 整合了许多来自 @supermerill 的SuperSlicer 的特性。" - -msgid "Snapmaker Orca integrates some features from the 3D printing open-source community, with specific attributions provided in the code comments." -msgstr "Snapmaker Orca 集成了来自 3D 打印开源社区的一些特性，并在代码注释中提供了具体的归属说明。" - -msgid "Snapmaker Orca is licensed under the GNU Affero Generall Public License, version 3." -msgstr "Snapmaker Orca 采用 GNU Affero 通用公共许可证，第 3 版进行授权。" - msgid "Portions copyright" msgstr "部分版权" @@ -2720,13 +3053,13 @@ msgid "License" msgstr "许可证" msgid "Snapmaker Orca is licensed under " -msgstr "Snapmaker Orca是在" +msgstr "逆戟鲸是在" msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero 通用公共许可证，版本 3下授权的" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "Snapmaker Orca 基于 Orca Slicer 开发" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca 基于 PrusaSlicer 以及 BambuStudio 开发" msgid "Libraries" msgstr "库" @@ -2740,9 +3073,6 @@ msgstr "本软件使用开源组件，其版权和其他所有权属于各自的 msgid "About %s" msgstr "关于 %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca" - msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." msgstr "Snapmaker Orca基于BambuStudio、PrusaSlicer 以及SuperSlicer开发。" @@ -2769,9 +3099,6 @@ msgstr "确定" msgid "Close" msgstr "关闭" -msgid "Colour" -msgstr "颜色" - msgid "" "Nozzle\n" "Temperature" @@ -2790,9 +3117,6 @@ msgstr "输入的范围应当在 %1% 和 %2% 之间" msgid "SN" msgstr "序列号" -msgid "Setting AMS slot information while printing is not supported" -msgstr "不支持在打印时修改AMS槽位信息" - msgid "Factors of Flow Dynamics Calibration" msgstr "动态流量校准系数" @@ -2805,6 +3129,9 @@ msgstr "系数K" msgid "Factor N" msgstr "系数N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "不支持在打印时修改AMS槽位信息" + msgid "Setting Virtual slot information while printing is not supported" msgstr "不支持在打印时设置虚拟槽位信息" @@ -2822,6 +3149,15 @@ msgstr "请输入有效的数值（K的范围为%.1f~%.1f）" msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "请输入有效的数值（K的范围为%.1f~%.1f，N的范围为%.1f~%.1f）" +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" +msgstr "" + +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "其他颜色" @@ -2854,15 +3190,9 @@ msgstr "热床温度" msgid "Max volumetric speed" msgstr "最大体积速度" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "床温" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "开始" @@ -2903,12 +3233,79 @@ msgstr "动态流量标定" msgid "Step" msgstr "步骤" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS舱内材料" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "左侧AMS" + +msgid "External" +msgstr "外部" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "右侧AMS" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "喷嘴" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "仅允许选择放入同种材质耗材丝的AMS槽位" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" msgid "Enable AMS" msgstr "启用AMS" @@ -2922,20 +3319,17 @@ msgstr "不启用AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "使用机箱背后挂载的材料打印" -msgid "Current Cabin humidity" -msgstr "当前舱内湿度" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" "当干燥剂过于潮湿时,请及时更换。以下几种情况下,指示器可能无法准确反映情况:盖子" "打开或干燥剂包被替换时。干燥剂需要数小时吸收潮气,低温也会延缓该过程。" msgid "" -"Config which AMS slot should be used for a filament used in the print job" +"Configure which AMS slot should be used for a filament used in the print job." msgstr "配置当前打印任务应使用哪个AMS槽位" msgid "Filament used in this print job" @@ -2953,20 +3347,37 @@ msgstr "不启用AMS" msgid "Print using materials mounted on the back of the case" msgstr "使用安装在机箱背面的材料进行打印" -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "采用AMS里的材料打印" msgid "Print with filaments mounted on the back of the chassis" msgstr "采用挂载在机箱背部的材料打印" +msgid "Auto Refill" +msgstr "自动补给" + +msgid "Left" +msgstr "左" + +msgid "Right" +msgstr "右" + msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "当前材料耗尽时，打印机将按照以下顺序继续打印。" +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "组" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + msgid "The printer does not currently support auto refill." msgstr "打印机当前不支持自动补给耗材。" @@ -2975,13 +3386,10 @@ msgid "" msgstr "AMS耗材备份未启用，请在AMS设置中启用。" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"如果AMS中有两卷相同的耗材，则自动补给启用。\n" -"（目前支持品牌、材料种类、颜色相同的耗材的自动补给）" msgid "DRY" msgstr "干燥" @@ -3003,7 +3411,7 @@ msgstr "" "秒。" msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." msgstr "" "注意：如果是在打印过程中插入新的耗材丝，AMS会在打印结束后自动读取此耗材丝信" @@ -3021,8 +3429,8 @@ msgstr "开机时检测" msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" "每次开机时，AMS将会自动读取其所插入的耗材信息(读取过程会转料卷)。需要花时大约" "1分钟。" @@ -3037,19 +3445,16 @@ msgid "Update remaining capacity" msgstr "更新剩余容量" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS读取Bambu Lab耗材丝信息同时推算料卷的剩余容量。在打印过程中，剩余容量会自" -"动更新。" msgid "AMS filament backup" msgstr "AMS材料备份" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "AMS料材丝耗尽后将自动切换到属性完全相同的耗材丝" msgid "Air Printing Detection" @@ -3095,10 +3500,14 @@ msgid "" "program" msgstr "发生错误。可能系统内存不足或者程序存在bug。" -msgid "Please save project and restart the program. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "发生致命错误：\"%1%\"" + +msgid "Please save project and restart the program." msgstr "请保存项目并重启程序。" -msgid "Processing G-Code from Previous file..." +msgid "Processing G-code from Previous file..." msgstr "从之前的文件加载G代码..." msgid "Slicing complete" @@ -3131,7 +3540,7 @@ msgstr "运行后处理脚本" msgid "Successfully executed post-processing script" msgstr "成功执行后处理脚本" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "导出 G-Code 时出现未知错误。" #, boost-format @@ -3180,16 +3589,16 @@ msgstr "" msgid "G-code file exported to %1%" msgstr "G 代码文件导出到 %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "导出G-code文件发生未知错误。" #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" -"无法保存Gcode文件。\n" +"无法保存G-code文件。\n" "错误信息：%1%。\n" "源文件 %2%." @@ -3200,222 +3609,6 @@ msgstr "将临时 G 代码复制到输出 G 代码失败" msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "计划上传到 `%1%`。请参阅窗口-> 打印主机上传队列" -msgid "Device" -msgstr "设备" - -msgid "Task Sending" -msgstr "正在发送的任务" - -msgid "Task Sent" -msgstr "已发送的任务" - -msgid "Edit multiple printers" -msgstr "编辑多个打印机" - -msgid "Select connected printers (0/6)" -msgstr "选择已连接的打印机 (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "选择已连接的打印机 (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "可以选择的打印机数量最多为 %d。" - -msgid "Offline" -msgstr "离线" - -msgid "No task" -msgstr "没有任务" - -msgid "View" -msgstr "视图" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "编辑打印机" - -msgid "Device Name" -msgstr "设备名" - -msgid "Task Name" -msgstr "任务名" - -msgid "Device Status" -msgstr "设备状态" - -msgid "Actions" -msgstr "动作" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "请在此处选择您想管理的设备（最多6个设备）。" - -msgid "Add" -msgstr "添加" - -msgid "Idle" -msgstr "空闲" - -msgid "Printing" -msgstr "打印中" - -msgid "Upgrading" -msgstr "升级中" - -msgid "Incompatible" -msgstr "不兼容的预设" - -msgid "syncing" -msgstr "同步中" - -msgid "Printing Finish" -msgstr "打印成功" - -msgid "Printing Failed" -msgstr "打印失败" - -msgid "Printing Pause" -msgstr "打印暂停" - -msgid "Prepare" -msgstr "准备" - -msgid "Slicing" -msgstr "正在切片" - -msgid "Pending" -msgstr "等待中" - -msgid "Sending" -msgstr "发送中" - -msgid "Sending Finish" -msgstr "发送成功" - -msgid "Sending Cancel" -msgstr "取消发送" - -msgid "Sending Failed" -msgstr "发送失败" - -msgid "Print Success" -msgstr "打印成功" - -msgid "Print Failed" -msgstr "打印失败" - -msgid "Removed" -msgstr "移除" - -msgid "Resume" -msgstr "继续" - -msgid "Stop" -msgstr "停止" - -msgid "Task Status" -msgstr "任务状态" - -msgid "Sent Time" -msgstr "发送时间" - -msgid "There are no tasks to be sent!" -msgstr "没有任务正在发送！" - -msgid "No historical tasks!" -msgstr "没有历史任务！" - -msgid "Loading..." -msgstr "正在加载视频……" - -msgid "No AMS" -msgstr "没有AMS" - -msgid "Send to Multi-device" -msgstr "发送到多设备" - -msgid "Preparing print job" -msgstr "正在准备打印任务" - -msgid "Abnormal print file data. Please slice again" -msgstr "打印文件数据异常，请重新切片" - -msgid "There is no device available to send printing." -msgstr "没有可用于发送打印的设备。" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "同时使用的打印机数量不能等于0。" - -msgid "Use External Spool" -msgstr "使用外挂料卷" - -msgid "Use AMS" -msgstr "使用AMS" - -msgid "Select Printers" -msgstr "选择打印机" - -msgid "Ams Status" -msgstr "AMS状态" - -msgid "Printing Options" -msgstr "打印选项" - -msgid "Bed Leveling" -msgstr "热床调平" - -msgid "Timelapse" -msgstr "延时摄影" - -msgid "Flow Dynamic Calibration" -msgstr "动态流量校准" - -msgid "Send Options" -msgstr "发送选项" - -msgid "Send to" -msgstr "发送至" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "打印机在同一时间。（这取决于有多少设备可以接受同时加热。）" - -msgid "Wait" -msgstr "等待" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "分钟发送一次。（这取决于完成加热需要多长时间。）" - -msgid "Send" -msgstr "发送" - -msgid "Name is invalid;" -msgstr "无效名称；" - -msgid "illegal characters:" -msgstr "非法字符：" - -msgid "illegal suffix:" -msgstr "非法后缀：" - -msgid "The name is not allowed to be empty." -msgstr "名称不允许为空。" - -msgid "The name is not allowed to start with space character." -msgstr "名称不允许以空格开头。" - -msgid "The name is not allowed to end with space character." -msgstr "名称不允许以空格结尾。" - -msgid "The name length exceeds the limit." -msgstr "名称长度超过限制。" - msgid "Origin" msgstr "原点" @@ -3481,10 +3674,13 @@ msgstr "选择 STL 文件来导入床模型:" msgid "Bed Shape" msgstr "热床形状" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" -msgstr "建议最低温度低于 190 度或建议最高温度高于 300 度。\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" +msgstr "" msgid "" "The recommended minimum temperature cannot be higher than the recommended " @@ -3505,21 +3701,21 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." msgstr "该耗材的推荐喷嘴温度是[%d, %d]摄氏度" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "最大体积流量设置过小\n" "重置为0.5" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度，这可能导致材料软化和堵塞。该材料的最高安全温" @@ -3527,12 +3723,12 @@ msgstr "" msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "层高过小。将重置为0.2" msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "熨烫线距过小。将重置为0.1" msgid "" @@ -3572,14 +3768,14 @@ msgstr "" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " +"is set to All." msgstr "“交替添加额外”与“确保垂直外壳厚度”的”全部“选项不兼容。" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" "自动调整这些设置？\n" "是 - 自动调整确保垂直外壳厚度为“适量”，并开启交替添加额外内墙\n" @@ -3619,11 +3815,6 @@ msgstr "" "是 - 选择开启擦拭塔\n" "否 - 选择保留支撑独立层高" -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "逐件打印时，挤出机可能与裙边碰撞。因此将裙边的层数重置为1。" - msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." @@ -3631,18 +3822,40 @@ msgstr "" "seam_slope_start_height需要小于layer_height。\n" "重置为0。" +#, fuzzy, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"锁定深度应小于表皮深度。\n" +"重置为表皮深度的50%。" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "绒毛表面的[挤出]和[组合]模式都需要启用Arachne墙体生成器。" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"是否自动更改这些设置？\n" +"是 - 启用Arachne墙体生成器\n" +"否 - 禁用Arachne墙体生成器并将绒毛表面设置为[位移]模式" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"旋转模式只能在外墙层数为1，关闭支撑，顶层层数为0，稀疏填充密度为0，传统延时摄" -"影时有效。" msgid " But machines with I3 structure will not generate timelapse videos." msgstr "但是使用I3结构的机器将不会生成延时视频。" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" @@ -3650,14 +3863,17 @@ msgstr "" "是 - 自动调整这些设置并开启旋转模式\n" "否 - 暂不使用旋转模式" +msgid "Printing" +msgstr "打印中" + msgid "Auto bed leveling" msgstr "自动热床调平" msgid "Heatbed preheating" msgstr "预加热热床" -msgid "Sweeping XY mech mode" -msgstr "扫描XY轴机械模态" +msgid "Vibration compensation" +msgstr "振动补偿" msgid "Changing filament" msgstr "换料" @@ -3665,14 +3881,14 @@ msgstr "换料" msgid "M400 pause" msgstr "M400暂停" -msgid "Paused due to filament runout" -msgstr "断料暂停" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "加热热端" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "标定挤出补偿" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "扫描热床" @@ -3695,78 +3911,138 @@ msgstr "清理喷嘴头" msgid "Checking extruder temperature" msgstr "检查挤出温度" -msgid "Printing was paused by the user" -msgstr "用户暂停" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "工具头前盖掉落暂停" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" +msgid "Calibrating the micro lidar" msgstr "轮廓仪激光标定" -msgid "Calibrating extrusion flow" -msgstr "挤出绝对流量标定" +msgid "Calibrating flow ratio" +msgstr "" -msgid "Paused due to nozzle temperature malfunction" -msgstr "热端温控异常暂停" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "热床温控异常暂停" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "耗材丝卸载中" -msgid "Skip step pause" -msgstr "丢步暂停" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "耗材丝加载中" -msgid "Motor noise calibration" -msgstr "电机噪声校准" +msgid "Motor noise cancellation" +msgstr "电机噪音消除" -msgid "Paused due to AMS lost" -msgstr "暂停，由于AMS丢失" +msgid "Pause (AMS offline)" +msgstr "" -msgid "Paused due to low speed of the heat break fan" -msgstr "暂停，由于散热风扇转速低" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -msgid "Paused due to chamber temperature control error" -msgstr "暂停，由于仓温控制错误" +msgid "Pause (chamber temperature control problem)" +msgstr "" msgid "Cooling chamber" msgstr "冷却仓温" -msgid "Paused by the Gcode inserted by user" -msgstr "暂停，由于用户插入的Gcode" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "电机噪音标定结果展示" -msgid "Nozzle filament covered detected pause" -msgstr "裹头暂停" +msgid "Pause (nozzle clumping)" +msgstr "" -msgid "Cutter error pause" -msgstr "切刀异常暂停" +msgid "Pause (cutter error)" +msgstr "" -msgid "First layer error pause" -msgstr "首层扫描异常暂停" +msgid "Pause (first layer error)" +msgstr "" -msgid "Nozzle clog pause" -msgstr "堵头暂停" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" +msgstr "" msgid "Unknown" msgstr "未定义" -msgid "Fatal" -msgstr "致命" - -msgid "Serious" -msgstr "严重" - -msgid "Common" -msgstr "普通" - msgid "Update successful." msgstr "更新成功。" @@ -3779,30 +4055,55 @@ msgstr "验证失败。" msgid "Update failed." msgstr "更新失败。" -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." msgstr "" -"当前仓温或目标仓温超过45℃为了避免挤出机堵塞，低温耗材（PLA/PETG/TPU）不允许被" -"装入。" msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"低温耗材（PLA/PETG/TPU）被装入挤出机中。为了避免挤出机堵塞，不允许将仓温设置" -"在45℃以上" msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" "当您将仓温设置在40℃以下时，仓温控制将不会激活。目标仓温将自动设置为0℃。" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "发起打印任务失败" msgid "" @@ -3815,27 +4116,77 @@ msgstr "当前流量校准参数无效" msgid "Selected diameter and machine diameter do not match" msgstr "选择的直径和机器直径不匹配" -msgid "Failed to generate cali gcode" +msgid "Failed to generate cali G-code" msgstr "生成校准gcode失败" msgid "Calibration error" msgstr "校准错误" -msgid "TPU is not supported by AMS." -msgstr "AMS不支持TPU。" +msgid "Resume Printing" +msgstr "继续打印" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "AMS不支持Bambu PET-CF/PA6-CF。" +msgid "Resume (defects acceptable)" +msgstr "" -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "潮湿的PVA会变得柔软并粘在AMS内，请在使用前注意干燥。" +msgid "Resume (problem solved)" +msgstr "" -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "CF/GF耗材丝丝又硬又脆，在AMS中很容易断裂或卡住，请谨慎使用。" +msgid "Stop Printing" +msgstr "停止打印" + +msgid "Check Assistant" +msgstr "前往机器助手" + +msgid "Filament Extruded, Continue" +msgstr "耗材已挤出，继续" + +msgid "Not Extruded Yet, Retry" +msgstr "耗材未挤出，重试" + +msgid "Finished, Continue" +msgstr "已完成，继续" + +msgid "Load Filament" +msgstr "进料" + +msgid "Filament Loaded, Resume" +msgstr "耗材已加载，继续" + +msgid "View Liveview" +msgstr "查看LiveView" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "完成" + +msgid "Retry" +msgstr "重试" + +msgid "Resume" +msgstr "继续" + +msgid "Unknown error." +msgstr "" msgid "default" msgstr "缺省" @@ -3845,37 +4196,37 @@ msgid "Edit Custom G-code (%1%)" msgstr "编辑自定义G-code (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" -msgstr "" +msgstr "内置占位符（双击项目添加到G-code）" -msgid "Search gcode placeholders" -msgstr "" +msgid "Search G-code placeholders" +msgstr "搜索G-code占位符" msgid "Add selected placeholder to G-code" -msgstr "" +msgstr "添加选中的占位符到G-code" msgid "Select placeholder" -msgstr "" +msgstr "选择占位符" msgid "[Global] Slicing State" -msgstr "" +msgstr "[全局]切片状态" msgid "Read Only" -msgstr "" +msgstr "只读" msgid "Read Write" -msgstr "" +msgstr "读写" msgid "Slicing State" -msgstr "" +msgstr "切片状态" msgid "Print Statistics" -msgstr "" +msgstr "打印统计" msgid "Objects Info" -msgstr "" +msgstr "对象信息" msgid "Dimensions" -msgstr "" +msgstr "尺寸" msgid "Temperatures" msgstr "温度" @@ -3885,7 +4236,7 @@ msgstr "时间戳" #, boost-format msgid "Specific for %1%" -msgstr "" +msgstr "特定于%1%" msgid "Presets" msgstr "预设" @@ -3897,7 +4248,7 @@ msgid "Filament settings" msgstr "耗材丝设置" msgid "SLA Materials settings" -msgstr "" +msgstr "SLA材料设置" msgid "Printer settings" msgstr "打印机设置" @@ -3906,7 +4257,7 @@ msgid "parameter name" msgstr "参数名称" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s 不可以是百分比" #, c-format, boost-format @@ -3943,12 +4294,31 @@ msgid "Input value is out of range" msgstr "输入值超出范围外" msgid "Some extension in the input is invalid" +msgstr "输入中的某些扩展无效" + +msgid "This parameter expects a valid template." +msgstr "此参数需要有效的模板" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "" +"无效的模式。请使用 N、N#K 或逗号分隔的列表（每个条目可选择性地添加 #K）。示" +"例：5, 5#2, 1,7,9, 5,9#2,18。" #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "无效格式，应该是\"%1%\"这种数组格式" +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "选择" + +msgid "Summary" +msgstr "" + msgid "Layer Height" msgstr "层高" @@ -3958,9 +4328,6 @@ msgstr "线宽" msgid "Fan Speed" msgstr "风扇速度" -msgid "Temperature" -msgstr "温度" - msgid "Flow" msgstr "流量" @@ -3994,7 +4361,7 @@ msgstr "风扇速度: " msgid "Temperature: " msgstr "温度: " -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "正在加载G-code" msgid "Generating geometry vertex data" @@ -4027,6 +4394,72 @@ msgstr "总时间" msgid "Total cost" msgstr "总成本" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "提示：" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "提示" + msgid "up to" msgstr "达到" @@ -4036,17 +4469,11 @@ msgstr "高于" msgid "from" msgstr "从" -msgid "Color Scheme" -msgstr "颜色方案" - msgid "Time" msgstr "时间" -msgid "Percent" -msgstr "百分比" - -msgid "Used filament" -msgstr "使用的耗材丝" +msgid "Usage" +msgstr "用法" msgid "Layer Height (mm)" msgstr "层高（mm）" @@ -4093,12 +4520,12 @@ msgstr "空驶" msgid "Extruder" msgstr "挤出机" -msgid "Filament change times" -msgstr "换料次数" - msgid "Cost" msgstr "成本" +msgid "Filament change times" +msgstr "换料次数" + msgid "Color change" msgstr "颜色更换" @@ -4108,11 +4535,8 @@ msgstr "打印" msgid "Printer" msgstr "打印机" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" -msgstr "" +msgid "Tool Change" +msgstr "换料" msgid "Time Estimation" msgstr "时间预估" @@ -4138,6 +4562,21 @@ msgstr "切换到静音模式" msgid "Switch to normal mode" msgstr "切换到普通模式" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" +"有对象被放置在构建板的边界上或超过高度限制。\n" +"请通过将其完全移动到构建板内或构建板外，并确认高度在构建空间以内来解决问题。" + msgid "Variable layer height" msgstr "可变层高" @@ -4156,27 +4595,15 @@ msgstr "半径" msgid "Keep min" msgstr "保留最小" -msgid "Left mouse button:" -msgstr "鼠标左键：" - msgid "Add detail" msgstr "减小层高" -msgid "Right mouse button:" -msgstr "鼠标右键：" - msgid "Remove detail" msgstr "增大层高" -msgid "Shift + Left mouse button:" -msgstr "Shift + 鼠标左键：" - msgid "Reset to base" msgstr "设置到基础层高" -msgid "Shift + Right mouse button:" -msgstr "Shift + 鼠标右键：" - msgid "Smoothing" msgstr "平滑" @@ -4189,6 +4616,55 @@ msgstr "增加/减小编辑区域" msgid "Sequence" msgstr "顺序" +msgid "object selection" +msgstr "对象选择" + +msgid "part selection" +msgstr "零件选择" + +msgid "number keys" +msgstr "数字键" + +msgid "number keys can quickly change the color of objects" +msgstr "数字键可以快速更改对象颜色" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "镜像物体" @@ -4235,11 +4711,25 @@ msgstr "避开挤出标定区域" msgid "Align to Y axis" msgstr "对齐到Y轴" +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "添加" + msgid "Add plate" msgstr "添加新盘" -msgid "Auto orient" -msgstr "自动朝向" +msgid "Auto orient all/selected objects" +msgstr "自动定位所有/选定的对象" + +msgid "Auto orient all objects on current plate" +msgstr "自动调整当前板上的所有对象" msgid "Arrange all objects" msgstr "全局整理" @@ -4259,12 +4749,30 @@ msgstr "装配体视图" msgid "Select Plate" msgstr "选择盘" +msgid "Slicing" +msgstr "正在切片" + +msgid "Slice all" +msgstr "切片所有盘" + +msgid "Failed" +msgstr "失败" + +msgid "All Plates" +msgstr "所有打印板" + +msgid "Stats" +msgstr "统计" + msgid "Assembly Return" msgstr "退出装配体视图" -msgid "return" +msgid "Return" msgstr "返回" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "上色工具条" @@ -4277,6 +4785,9 @@ msgstr "剖面视图" msgid "Assemble Control" msgstr "拼装视图控制" +msgid "Selection Mode" +msgstr "选择模式" + msgid "Total Volume:" msgstr "总体积：" @@ -4291,31 +4802,71 @@ msgstr "尺寸：" #, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"发现gcode路径在层%d，高为%.2lf mm处的冲突。请将有冲突的对象分离得更远(%s <-> " -"%s)。" +"发现G-code路径在层%d，高度为%.2lf mm处有冲突。请将有冲突的对象分离得更远(%s " +"<-> %s)。" -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "检测到有对象放在盘的边界上。" msgid "A G-code path goes beyond the max print height." msgstr "检测出超出打印高度的G-code路径。" -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "检测超出热床边界的G-code路径。" -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "只有正在编辑的对象是可见的。" -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"对象被放置在构建板的边界上或超过高度限制。\n" -"请通过将其完全移动到构建板内或构建板外，并确认高度在构建空间以内来解决问题。" msgid "Calibration step selection" msgstr "校准步骤选择" @@ -4326,11 +4877,8 @@ msgstr "微激光雷达校准" msgid "Bed leveling" msgstr "热床调平" -msgid "Vibration compensation" -msgstr "振动补偿" - -msgid "Motor noise cancellation" -msgstr "电机噪音消除" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" msgstr "校准程序" @@ -4382,24 +4930,21 @@ msgstr "自定义摄像机源" msgid "Show \"Live Video\" guide page." msgstr "显示\"直播视频流\"指南" -msgid "720p" -msgstr "" - -msgid "1080p" -msgstr "" - -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "连接打印机（局域网）" msgid "Please input the printer access code:" msgstr "请输入打印机访问码：" msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"你可以在打印机“设置->网络->连接->访问码\"\n" -"查看，如下图所示：" msgid "Invalid input." msgstr "非法输入" @@ -4419,9 +4964,15 @@ msgstr "正在关闭应用程序，部分预设已修改。" msgid "Logging" msgstr "日志" +msgid "Prepare" +msgstr "准备" + msgid "Preview" msgstr "预览" +msgid "Device" +msgstr "设备" + msgid "Multi-device" msgstr "多设备" @@ -4443,12 +4994,12 @@ msgstr "切片单盘" msgid "Print plate" msgstr "打印单盘" -msgid "Slice all" -msgstr "切片所有盘" - msgid "Export G-code file" msgstr "导出G-code文件" +msgid "Send" +msgstr "发送" + msgid "Export plate sliced file" msgstr "导出单盘切片文件" @@ -4461,6 +5012,9 @@ msgstr "打印所有盘" msgid "Send all" msgstr "发送所有盘" +msgid "Send to Multi-device" +msgstr "发送到多设备" + msgid "Keyboard Shortcuts" msgstr "快捷键" @@ -4495,10 +5049,6 @@ msgstr "下载模型" msgid "Default View" msgstr "默认视图" -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "上" - msgid "Top View" msgstr "顶部视图" @@ -4521,15 +5071,9 @@ msgstr "后" msgid "Rear View" msgstr "后视图" -msgid "Left" -msgstr "左" - msgid "Left View" msgstr "左视图" -msgid "Right" -msgstr "右" - msgid "Right View" msgstr "右视图" @@ -4545,8 +5089,8 @@ msgstr "新建一个项目" msgid "Open a project file" msgstr "打开项目文件" -msgid "Recent projects" -msgstr "最近的项目" +msgid "Recent files" +msgstr "最近的文件" msgid "Save Project" msgstr "保存项目" @@ -4557,9 +5101,6 @@ msgstr "保存当前项目到文件" msgid "Save Project as" msgstr "项目另存为" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "项目另存为" @@ -4593,8 +5134,8 @@ msgstr "导出所有对象为多个STL" msgid "Export Generic 3MF" msgstr "导出通用 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "导出不含 3mf 扩展的 3mf 文件" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "导出不含 3MF 扩展的 3MF 文件" msgid "Export current sliced file" msgstr "导出当前已切片的文件" @@ -4608,6 +5149,9 @@ msgstr "导出 G-code" msgid "Export current plate as G-code" msgstr "导出当前盘的G-code" +msgid "Export toolpaths as OBJ" +msgstr "将工具路径导出为OBJ格式" + msgid "Export Preset Bundle" msgstr "导出预设包" @@ -4659,6 +5203,12 @@ msgstr "克隆所选项" msgid "Clone copies of selections" msgstr "克隆多份所选项" +msgid "Duplicate Current Plate" +msgstr "复制当前打印板" + +msgid "Duplicate the current plate" +msgstr "复制当前打印板" + msgid "Select all" msgstr "选中所有" @@ -4677,16 +5227,24 @@ msgstr "使用透视视角" msgid "Use Orthogonal View" msgstr "使用正交视角" +msgid "Auto Perspective" +msgstr "自动透视" + +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "" + msgid "Show &G-code Window" msgstr "显示G-code窗口" -msgid "Show g-code window in Previce scene" +msgid "Show G-code window in Preview scene." msgstr "显示G-code窗口" msgid "Show 3D Navigator" msgstr "显示3D导航器" -msgid "Show 3D navigator in Prepare and Preview scene" +msgid "Show 3D navigator in Prepare and Preview scene." msgstr "显示3D导航器" msgid "Reset Window Layout" @@ -4698,18 +5256,27 @@ msgstr "重置为默认窗口布局" msgid "Show &Labels" msgstr "显示名称" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "在3D场景中显示对象名称" msgid "Show &Overhang" msgstr "显示悬空高亮" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "在3D场景中显示悬空高亮" +msgid "Show Selected Outline (beta)" +msgstr "显示选中轮廓（测试版）" + +msgid "Show outline around selected object in 3D scene." +msgstr "在3D场景中显示选中对象的轮廓" + msgid "Preferences" msgstr "偏好设置" +msgid "View" +msgstr "视图" + msgid "Help" msgstr "帮助" @@ -4728,6 +5295,18 @@ msgstr "细调" msgid "Flow rate test - Pass 2" msgstr "流量测试 - 通过 2" +msgid "YOLO (Recommended)" +msgstr "YOLO（推荐）" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO流量校准，0.01步长" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO（完美主义者版本）" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO流量校准，0.005步长" + msgid "Flow rate" msgstr "流量" @@ -4737,28 +5316,33 @@ msgstr "压力提前" msgid "Retraction test" msgstr "回抽测试" -msgid "Orca Tolerance Test" -msgstr "Orca误差测试" - msgid "Max flowrate" msgstr "最大体积流量" +msgid "Cornering" +msgstr "转弯" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "输入整形频率" + +msgid "Input Shaping Damping/zeta factor" +msgstr "输入整形阻尼/阻尼系数" + +msgid "Input Shaping" +msgstr "输入整形" + msgid "VFA" msgstr "VFA(Vertical Fine Artifacts垂直振纹)" -# SoftFever -msgid "More..." -msgstr "进阶校准" - msgid "Tutorial" msgstr "教程" msgid "Calibration help" msgstr "校准帮助" -msgid "More calibrations" -msgstr "更多校准" - msgid "&Open G-code" msgstr "打开G-code" @@ -4774,9 +5358,6 @@ msgstr "从磁盘重新加载平台" msgid "Export &Toolpaths as OBJ" msgstr "将工具路径导出为OBJ格式" -msgid "Export toolpaths as OBJ" -msgstr "将工具路径导出为OBJ格式" - msgid "Open &Slicer" msgstr "打开 Studio" @@ -4800,16 +5381,19 @@ msgid "&Help" msgstr "帮助" #, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "有一个同名的文件 %s。你想覆盖它吗？" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "存在同名文件：%s，是否要覆盖？" #, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "有一个同名的配置 %s。你想覆盖它吗？" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "存在同名配置：%s，是否要覆盖？" msgid "Overwrite file" msgstr "覆盖文件" +msgid "Overwrite config" +msgstr "覆盖配置" + msgid "Yes to All" msgstr "全是" @@ -4857,7 +5441,7 @@ msgid "Filament Settings" msgstr "打印丝设置" msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" @@ -4892,7 +5476,7 @@ msgstr "打印机正在忙于下载，请等下载完成后再尝试。" msgid "Printer camera is malfunctioning." msgstr "打印机摄像头异常。" -msgid "Problem occured. Please update the printer firmware and try again." +msgid "A problem occurred. Please update the printer firmware and try again." msgstr "出现了一些问题。请更新打印机固件后重试。" msgid "" @@ -4909,15 +5493,15 @@ msgid "Connection Failed. Please check the network and try again" msgstr "链接失败。请检查网络后重试" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." msgstr "检查网络后重试。如仍未恢复，可重启或更新打印机。" msgid "The printer has been logged out and cannot connect." msgstr "打印机已注销，无法连接。" -msgid "Stopped." -msgstr "已经停止。" +msgid "Video Stopped." +msgstr "视频已停止。" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "局域网连接失败（无法启动直播）" @@ -4935,7 +5519,7 @@ msgid "" "Snapmaker Orca supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" -"另一个虚拟摄像头正在工作。\n" +"您想停止此虚拟摄像头吗？另一个虚拟摄像头正在工作。\n" "Snapmaker Orca 同时只能支持一个虚拟摄像头。\n" "是否停止前一个虚拟摄像头？" @@ -4952,6 +5536,9 @@ msgstr "信息" msgid "Playing..." msgstr "正在播放中……" +msgid "Loading..." +msgstr "正在加载视频……" + msgid "Year" msgstr "年" @@ -4970,6 +5557,9 @@ msgstr "按月份分组，从最近的开始展示" msgid "Show all files, recent first." msgstr "显示所有文件，从最近的开始展示" +msgid "Timelapse" +msgstr "延时摄影" + msgid "Switch to timelapse files." msgstr "切换到延时摄影文件列表" @@ -4979,7 +5569,8 @@ msgstr "录像" msgid "Switch to video files." msgstr "切换到视频文件列表" -msgid "Switch to 3mf model files." +#, fuzzy +msgid "Switch to 3MF model files." msgstr "切换到3MF模型文件。" msgid "Delete selected files from printer." @@ -5006,10 +5597,6 @@ msgstr "从打印机重新加载文件列表。" msgid "No printers." msgstr "未选择打印机" -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "连接失败 [%d]！" - msgid "Loading file list..." msgstr "加载文件列表..." @@ -5019,26 +5606,16 @@ msgstr "文件列表为空" msgid "Load failed" msgstr "加载失败" -msgid "Initialize failed (Device connection not ready)!" -msgstr "初始化失败（设备未连接）" - msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." -msgstr "当前固件暂不支持查看SD卡中文件。请更新打印机固件后重试。" - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "初始化失败（存储不可用，请插入 SD 卡）！" +msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "局域网连接失败（无法查看SD卡）" -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "局域网模式下暂不支持查看SD卡内文件。" - -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "初始化失败（%s）!" +msgid "Browsing file in storage is not supported in LAN Only Mode." +msgstr "" #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" @@ -5056,7 +5633,7 @@ msgstr "你确定要从打印机中删除文件'%s'吗？" msgid "Delete file" msgstr "删除文件" -msgid "Fetching model infomations ..." +msgid "Fetching model information..." msgstr "正在获取模型信息..." msgid "Failed to fetch model information from printer." @@ -5066,8 +5643,8 @@ msgid "Failed to parse model information." msgstr "解析模型信息失败。" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" ".gcode.3mf文件中不包含G-code数据。请使用Snapmaker Orca进行切片并导出新的." "gcode.3mf文件。" @@ -5081,6 +5658,8 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" +"文件：%s\n" +"标题：%s\n" msgid "Download waiting..." msgstr "等待下载中..." @@ -5098,11 +5677,17 @@ msgstr "下载完成" msgid "Downloading %d%%..." msgstr "下载中 %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." msgstr "重新连接打印机，该操作无法立即完成，请稍后再试。" +msgid "Timeout, please try again." +msgstr "" + msgid "File does not exist." msgstr "文件不存在。" @@ -5112,13 +5697,47 @@ msgstr "文件校验和错误。请重试。" msgid "Not supported on the current printer version." msgstr "当前打印机的版本不支持。" -msgid "Storage unavailable, insert SD card." -msgstr "存储不可用，请插入SD卡。" +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" msgstr "错误码：%d" +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." +msgstr "" + msgid "Speed:" msgstr "速度：" @@ -5158,12 +5777,85 @@ msgstr "反转横轴，俯仰轴" msgid "Invert Roll axis" msgstr "反转纵轴，横滚轴" +msgid "(LAN)" +msgstr "（局域网）" + +msgid "Search" +msgstr "" + +msgid "My Device" +msgstr "" + +msgid "Other Device" +msgstr "" + +msgid "Online" +msgstr "在线" + +msgid "Input access code" +msgstr "输入访问码" + +msgid "Can't find my devices?" +msgstr "" + +msgid "Log out successful." +msgstr "登出成功。" + +msgid "Offline" +msgstr "离线" + +msgid "Busy" +msgstr "忙碌" + +msgid "Modifying the device name" +msgstr "" + +msgid "Name is invalid;" +msgstr "无效名称；" + +msgid "illegal characters:" +msgstr "非法字符：" + +msgid "illegal suffix:" +msgstr "非法后缀：" + +msgid "The name is not allowed to be empty." +msgstr "名称不允许为空。" + +msgid "The name is not allowed to start with space character." +msgstr "名称不允许以空格开头。" + +msgid "The name is not allowed to end with space character." +msgstr "名称不允许以空格结尾。" + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "通过Pin码绑定" + +msgid "Bind with Access Code" +msgstr "" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "打印进度" -msgid "0" +msgid "Parts Skip" msgstr "" +msgid "Stop" +msgstr "停止" + msgid "Layer: N/A" msgstr "层： N/A" @@ -5189,8 +5881,8 @@ msgstr "评分" msgid "Camera" msgstr "摄像机" -msgid "SD Card" -msgstr "SD卡" +msgid "Storage" +msgstr "存储" msgid "Camera Setting" msgstr "相机设置" @@ -5207,35 +5899,41 @@ msgstr "打印机零件" msgid "Print Options" msgstr "打印选项" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "LED灯" -msgid "Aux" -msgstr "辅助" - -msgid "Cham" -msgstr "机箱" - msgid "Bed" msgstr "热床" msgid "Debug Info" msgstr "调试信息" -msgid "No SD Card" -msgstr "无SD卡" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD卡异常" +msgid "No Storage" +msgstr "无存储" + +msgid "Storage Abnormal" +msgstr "存储异常" msgid "Cancel print" msgstr "取消打印" -msgid "Are you sure you want to cancel this print?" -msgstr "你确定要取消这次打印吗？" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "打印机正在执行其他打印任务" + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "下载中..." @@ -5256,15 +5954,13 @@ msgid "Layer: %d/%d" msgstr "层： %d/%d" msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." msgstr "请在进料或退料前把喷嘴升温到170℃以上。" -msgid "Still unload" -msgstr "继续退料" - -msgid "Still load" -msgstr "继续进料" +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." +msgstr "" msgid "Please select an AMS slot before calibration" msgstr "请先选择一个AMS槽位后进行标定" @@ -5289,8 +5985,19 @@ msgstr "运动" msgid "Ludicrous" msgstr "狂暴" -msgid "Can't start this without SD card." -msgstr "没有SD卡无法开始任务" +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "对打印配置文件进行评分" @@ -5313,13 +6020,10 @@ msgstr "提交" msgid "Please click on the star first." msgstr "请先点击星星。" -msgid "InFo" -msgstr "信息" - msgid "Get oss config failed." msgstr "获取oss配置失败。" -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "上传图片" msgid "Number of images successfully uploaded" @@ -5334,7 +6038,7 @@ msgstr "上传配置解析失败\n" msgid " No corresponding storage bucket\n" msgstr "没有相应的存储桶\n" -msgid " can not be opened\n" +msgid " cannot be opened\n" msgstr "无法打开\n" msgid "" @@ -5356,7 +6060,7 @@ msgid "obtaining instance_id failed\n" msgstr "获取instance_id失败\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" @@ -5370,7 +6074,7 @@ msgstr "错误消息：" msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" @@ -5378,7 +6082,7 @@ msgstr "" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "您的一些图像上传失败。您是否想要重定向到评分网页？" msgid "You can select up to 16 images." @@ -5386,7 +6090,7 @@ msgstr "您最多可以选择16张图像。" msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" "此打印配置文件至少需要一个成功的打印记录 \n" "才能给出好评（4星或5星）。" @@ -5394,12 +6098,22 @@ msgstr "" msgid "Status" msgstr "设备状态" +msgctxt "Firmware" msgid "Update" -msgstr "固件更新" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "不再显示" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s 错误" @@ -5427,11 +6141,13 @@ msgstr "%s 信息" msgid "Skip" msgstr "跳过" -msgid "Newer 3mf version" +#, fuzzy +msgid "Newer 3MF version" msgstr "较新的3mf版本" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." msgstr "3mf文件版本处于Beta测试阶段，比当前Snapmaker Orca版本更新。" @@ -5441,10 +6157,12 @@ msgstr "如果您想尝试Snapmaker Orca Beta，您可以点击" msgid "Download Beta Version" msgstr "下载Beta版本" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." msgstr "3mf文件版本比当前Snapmaker Orca版本更新。" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." msgstr "更新你的Snapmaker Orca以启用3mf文件中的所有功能。" msgid "Current Version: " @@ -5453,9 +6171,32 @@ msgstr "当前版本：" msgid "Latest Version: " msgstr "最新版本：" +msgctxt "Software" +msgid "Update" +msgstr "" + msgid "Not for now" msgstr "暂不" +msgid "Server Exception" +msgstr "服务器异常" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "服务器无法响应。请单击下面的链接检查服务器状态。" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "如果服务器处于故障状态，您可以暂时使用离线打印或本地网络打印。" + +msgid "How to use LAN only mode" +msgstr "如何使用仅局域网模式" + +msgid "Don't show this dialog again" +msgstr "不再显示此对话框？" + msgid "3D Mouse disconnected." msgstr "3D鼠标断连。" @@ -5516,9 +6257,14 @@ msgstr[0] "%1$d对象有涂色。" #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" +msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d对象加载为一个切割对象的子部件" +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "%1$d个对象加载了绒毛表面绘制。" + msgid "ERROR" msgstr "错误" @@ -5540,7 +6286,7 @@ msgstr "错误：" msgid "Warning:" msgstr "警告：" -msgid "Export successfully." +msgid "Exported successfully" msgstr "导出成功." msgid "Model file downloaded." @@ -5558,11 +6304,11 @@ msgstr "点击此处安装" msgid "WARNING:" msgstr "警告：" -msgid "Your model needs support ! Please make support material enable." +msgid "Your model needs support! Please enable support material." msgstr "你的模型需要支撑才能打印。请开启材料支撑选项。" -msgid "Gcode path overlap" -msgstr "Gcode路径有重叠" +msgid "G-code path overlap" +msgstr "G-code路径重叠" msgid "Support painting" msgstr "支撑绘制" @@ -5607,12 +6353,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "底部" -msgid "Enable AI monitoring of printing" -msgstr "启用打印过程的AI监控" - -msgid "Sensitivity of pausing is" -msgstr "暂停的灵敏度为" - msgid "Enable detection of build plate position" msgstr "启用构建板位置检测" @@ -5621,35 +6361,106 @@ msgid "" "the tag is not in predefined range." msgstr "检测构建板的定位标记，如果标记不在预定义范围内时暂停打印。" +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "启用打印过程的AI监控" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "裹头检测" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "首层扫描" msgid "Auto-recovery from step loss" msgstr "自动从丢步中恢复" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "允许提示音" msgid "Filament Tangle Detect" msgstr "缠料检测" -msgid "Nozzle Clumping Detection" -msgstr "裹头检测" - msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "检查喷嘴是否被耗材丝或其他异物裹住" msgid "Nozzle Type" msgstr "喷嘴类型" -msgid "Stainless Steel" -msgstr "不锈钢" +msgid "Nozzle Flow" +msgstr "" + +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" +msgstr "" msgid "Hardened Steel" msgstr "硬化钢" -#, c-format, boost-format -msgid "%.1f" +msgid "Stainless Steel" +msgstr "不锈钢" + +msgid "Tungsten Carbide" +msgstr "" + +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." msgstr "" msgid "Global" @@ -5685,6 +6496,9 @@ msgstr "解锁当前板" msgid "Lock current plate" msgstr "锁定当前板" +msgid "Filament grouping" +msgstr "" + msgid "Edit current plate name" msgstr "编辑当前盘名" @@ -5694,6 +6508,31 @@ msgstr "将当前板移到最前面" msgid "Customize current plate" msgstr "自定义当前板" +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + #, boost-format msgid " plate %1%:" msgstr "盘%1%：" @@ -5722,14 +6561,67 @@ msgstr "预估打印时间" msgid "Filament changes" msgstr "材料切换" +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "点击编辑配置" msgid "Connection" msgstr "连接" -msgid "Bed type" -msgstr "热床类型" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "冲刷体积" @@ -5750,41 +6642,30 @@ msgid "Search plate, object and part." msgstr "搜索盘、模型和零件。" msgid "Pellets" +msgstr "颗粒" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "没有发现AMS材料。请在“设备”页面选择打印机，将加载 AMS 信息" +msgid "There are no compatible filaments, and sync is not performed." +msgstr "没有如任何兼容的材料，同步操作未执行。" msgid "Sync filaments with AMS" msgstr "同步到 AMS 的材料列表" msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "同步到 AMS 的材料列表将丢弃所有当前配置的材料预设、颜色。是否继续？" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "已经同步过，你希望仅同步改变的材料还是重新同步所有材料？" - -msgid "Sync" -msgstr "同步" - -msgid "Resync" -msgstr "重新同步" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "没有如任何兼容的材料，同步操作未执行。" - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." +msgstr "" + +msgid "" +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" -"有一些未知型号的材料，映射到通用预设。请更新或者重启 Snapmaker Orca，以检查系统" -"预设有没有更新。" #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -5792,13 +6673,13 @@ msgstr "是否保存修改到“%1%”？" #, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." msgstr "卸载成功。设备%s(%s)现在可能安全地从电脑移除。" #, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "弹出设备%s(%s)失败。" +msgid "Ejecting of device %s (%s) has failed." +msgstr "弹出设备%s(%s)失败" msgid "Previous unsaved project detected, do you want to restore it?" msgstr "检测到有未保存的项目，是否恢复此项目？" @@ -5827,66 +6708,96 @@ msgid "" "It is recommended to change to smooth mode." msgstr "启用传统的延时摄影可能会导致表面瑕疵。建议更改为平滑模式。" +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "展开侧边栏" msgid "Collapse sidebar" msgstr "折叠边栏" +msgid "Tab" +msgstr "标签" + #, c-format, boost-format msgid "Loading file: %s" msgstr "加载文件：%s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." msgstr "该3mf文件不是来自Snapmaker Orca，将只加载几何数据。" -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "加载3mf" -#, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" +"该项目由 Snapmaker Orca 2.3.1-alpha 创建，并使用了填充旋转模板设置，这些设置可能" +"无法与您当前的填充模式正常配合，可能导致支撑不足或打印质量问题。" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "您是否希望 Snapmaker Orca 清除旋转模板设置以自动修复此问题？" + +#, fuzzy, c-format, boost-format +msgid "" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" msgstr "该3mf的版本%s比%s的版本%s新，发现以下参数键值无法识别:" msgid "You'd better upgrade your software.\n" msgstr "建议升级您的软件版本。\n" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." msgstr "该3mf的版本%s比%s的版本%s要新，建议升级你的软件。" -msgid "Invalid values found in the 3mf:" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" msgstr "在3mf文件中发现无效值：" msgid "Please correct them in the param tabs" msgstr "请在参数页更正它们" -msgid "The 3mf has following modified G-codes in filament or printer presets:" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" msgstr "该3mf文件中的材料或者打印机预设包含以下修改过的G-codes:" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" msgstr "请确认这些修改过的G-codes是否安全，以防止对机器造成任何损坏！" -msgid "Modified G-codes" +msgid "Modified G-code" msgstr "修改过的G-codes" -msgid "The 3mf has following customized filament or printer presets:" +msgid "The 3MF has the following customized filament or printer presets:" msgstr "该3MF文件包含以下自定义的材料或打印机预设:" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" msgstr "请确认这些预设中的G-codes是否安全，以防止对机器造成任何损坏!" msgid "Customized Preset" msgstr "自定义的预设" -msgid "Name of components inside step file is not UTF8 format!" +#, fuzzy +msgid "Name of components inside STEP file is not UTF8 format!" msgstr "step 文件中的部件名称包含非UTF8格式的字符！" msgid "The name may show garbage characters!" @@ -5911,7 +6822,7 @@ msgid "" " Do you want to scale to millimeters?" msgstr "" "文件 %s 中对象的尺寸似乎是以米或者英寸为单位定义的。\n" -"Snapmaker Orca的内部单位为毫米。是否要转换成毫米？" +"逆戟鲸的内部单位为毫米。是否要转换成毫米？" msgid "Object too small" msgstr "对象尺寸过小" @@ -5933,12 +6844,22 @@ msgstr "将这些文件加载为一个多零件对象？\n" msgid "Object with multiple parts was detected" msgstr "检测到多零件对象" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" + +msgid "" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + msgid "The file does not contain any geometry data." msgstr "此文件不包含任何几何数据。" msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "对象看起来太大，希望将对象自动缩小以适应热床吗？" msgid "Object too large" @@ -5999,6 +6920,34 @@ msgstr "选择新文件" msgid "File for the replace wasn't selected" msgstr "未选择替换文件" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "请选择一个文件" @@ -6042,11 +6991,22 @@ msgstr "未检测到网络插件。网络相关功能不可用。" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "仅预览模式：\n" "被加载的文件仅包含G-Code，不支持进入准备页面" +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "您可以保留修改的预设到新项目中或者忽略这些修改" @@ -6068,13 +7028,13 @@ msgstr "保存项目" msgid "Importing Model" msgstr "正在导入模型" -msgid "prepare 3mf file..." +msgid "prepare 3MF file..." msgstr "正在准备3mf文件..." msgid "Download failed, unknown file format." msgstr "下载失败，未知文件格式。" -msgid "downloading project ..." +msgid "downloading project..." msgstr "项目下载中..." msgid "Download failed, File size exception." @@ -6089,13 +7049,23 @@ msgid "" "import it." msgstr "导入到Snapmaker Orca失败。请下载文件并手动导入。" +msgid "INFO:" +msgstr "信息：" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "未提供校准加速度。使用默认加速度值" + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "未提供校准速度。使用默认最佳速度" + msgid "Import SLA archive" msgstr "导入 SLA 存档" msgid "The selected file" msgstr "已选择的文件" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "不包含有效的G-code文件。" msgid "Error occurs while loading G-code file" @@ -6133,10 +7103,10 @@ msgstr "只能同时打开一个G-code文件。" msgid "G-code loading" msgstr "正在加载G-code文件" -msgid "G-code files can not be loaded with models together!" +msgid "G-code files cannot be loaded with models together!" msgstr "G-code文件不能和模型一起加载" -msgid "Can not add models when in preview mode!" +msgid "Cannot add models when in preview mode!" msgstr "在预览模式不允许添加模型" msgid "All objects will be removed, continue?" @@ -6172,6 +7142,12 @@ msgid "" "on the printer." msgstr "文件%s已经发送到打印机的存储空间，可以在打印机上浏览。" +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." @@ -6199,23 +7175,15 @@ msgid "" "will be exported." msgstr "无法对模型网格执行布尔运算。只有正面部分将被导出。" -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"您确定要将原始SVG文件与其本地路径存储到3MF文件中吗？\n" -"如果选择“否”，项目中的所有SVG文件将不再可编辑。" - -msgid "Private protection" -msgstr "隐私保护" - msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "打印机是否就绪？打印平台是否在正确的位置、有没有异物、是否干净？" msgid "Upload and Print" msgstr "上传并打印" +msgid "Abnormal print file data. Please slice again" +msgstr "打印文件数据异常，请重新切片" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6235,8 +7203,33 @@ msgstr "自定义的支撑和涂色在模型修复之前将被清除。" msgid "Optimize Rotation" msgstr "优化旋转" -msgid "Invalid number" -msgstr "无效数字" +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" msgid "Plate Settings" msgstr "盘参数设置" @@ -6277,24 +7270,47 @@ msgstr "体积： %1% 毫米³\n" msgid "Triangles: %1%\n" msgstr "三角形：%1%\n" -msgid "Tips:" -msgstr "提示：" - msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" -"\"修复模型\"功能目前仅适用于Windows。请在Snapmaker Orca(windows)或CAD软件上修复模型。" +"\"修复模型\"功能目前仅适用于Windows。请在逆戟鲸(windows)或CAD软件上修复模型。" #, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." msgstr "" -"热床% d：%s不建议被用于打印%s（%s）材料。如果你依然想打印，请设置耗材对应的热" +"热床 %d：%s不建议被用于打印%s（%s）材料。如果你依然想打印，请设置耗材对应的热" "床温度为非零值。" +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" +msgstr "" + msgid "Switching the language requires application restart.\n" msgstr "切换语言要求重启应用程序。\n" @@ -6310,39 +7326,6 @@ msgstr "在切换应用语言之前发现某些参数预设有更改。" msgid "Changing application language" msgstr "正在为应用程序切换语言" -msgid "Changing the region will log out your account.\n" -msgstr "修改区域会自动登出您的账号。\n" - -msgid "Region selection" -msgstr "区域选择" - -msgid "Second" -msgstr "秒" - -msgid "Browse" -msgstr "浏览" - -msgid "Choose Download Directory" -msgstr "选择下载文件夹" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -msgid "General Settings" -msgstr "通用设置" - msgid "Asia-Pacific" msgstr "亚太" @@ -6358,23 +7341,56 @@ msgstr "北美" msgid "Others" msgstr "其他" -msgid "Login Region" -msgstr "登录区域" +msgid "Changing the region will log out your account.\n" +msgstr "修改区域会自动登出您的账号。\n" -msgid "Stealth Mode" -msgstr "局域网模式" +msgid "Region selection" +msgstr "区域选择" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "备份的周期" + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "停止向拓竹科技服务器发送数据。如果您不使用Bambu " -"Lab的打印机或仅使用局域网模式，则可以安全地启用此功能。" +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" +msgstr "" -msgid "Enable network plugin" -msgstr "启用网络插件" +msgid "Browse" +msgstr "浏览" -msgid "Check for stable updates only" -msgstr "仅检测正式版的更新" +msgid "Choose folder for downloaded items" +msgstr "" + +msgid "Choose Download Directory" +msgstr "选择下载文件夹" + +msgid "Associate" +msgstr "相关的" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "与Snapmaker Orca一起使用，以便Orca可以从...打开模型" + +msgid "Current Association: " +msgstr "当前相关项" + +msgid "Current Instance" +msgstr "当前实例" + +msgid "Current Instance Path: " +msgstr "当前实例路径" + +msgid "General" +msgstr "常规" msgid "Metric" msgstr "公制" @@ -6385,6 +7401,18 @@ msgstr "英制" msgid "Units" msgstr "单位" +msgid "Home" +msgstr "首页" + +msgid "Default page" +msgstr "起始页" + +msgid "Set the page opened on startup." +msgstr "设置启动Snapmaker Orca时首先显示的页面。" + +msgid "Enable dark mode" +msgstr "启用深色模式" + msgid "Allow only one Snapmaker Orca instance" msgstr "同时仅运行一个 Snapmaker Orca 实例" @@ -6400,17 +7428,108 @@ msgid "" "If this is enabled, when starting Snapmaker Orca and another instance of the " "same Snapmaker Orca is already running, that instance will be reactivated " "instead." -msgstr "如果启用，当您在已经启动一个 Snapmaker Orca 实例时再次启动 Snapmaker Orca ，" -"将会激活您已经启动的 Snapmaker Orca 实例。" +msgstr "" +"如果启用，当您在已经启动一个 Snapmaker Orca 实例时再次启动 Snapmaker Orca ，将会激活" +"您已经启动的 Snapmaker Orca 实例。" -msgid "Home" -msgstr "首页" +msgid "Show splash screen" +msgstr "显示启动画面" -msgid "Default Page" -msgstr "起始页" +msgid "Show the splash screen during startup." +msgstr "在启动时显示启动画面。" -msgid "Set the page opened on startup." -msgstr "设置启动Snapmaker Orca时首先显示的页面。" +msgid "Downloads folder" +msgstr "" + +msgid "Target folder for downloaded items" +msgstr "" + +msgid "Load All" +msgstr "加载全部" + +msgid "Ask When Relevant" +msgstr "当相关时查询" + +msgid "Always Ask" +msgstr "总是提问" + +msgid "Load Geometry Only" +msgstr "仅加载几何形状" + +msgid "Load behaviour" +msgstr "加载 交互项" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "printter/filament/process 设置项文件能否以 .3mf后缀方式打开" + +msgid "Maximum recent files" +msgstr "最大最近使用文件数" + +msgid "Maximum count of recent files" +msgstr "最近使用文件的最大数量" + +msgid "Add STL/STEP files to recent files list" +msgstr "添加模型文件 STL/STEP 到最近文件列表" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "加载具有修改的 G-Code 的 3MF 时不会出现警告" + +msgid "Show options when importing STEP file" +msgstr "显示STEP网格参数设置对话框" + +msgid "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "如果启用，在导入STEP文件时将出现参数设置对话框" + +msgid "Auto backup" +msgstr "自动备份" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "定期备份你的项目，以便从偶尔的崩溃中恢复过来。" + +msgid "Preset" +msgstr "预设" + +msgid "Remember printer configuration" +msgstr "记住打印机选项" + +msgid "" +"If enabled, Orca will remember and switch filament/process configuration for " +"each printer automatically." +msgstr "如果启用，Orca会自动记录并切换您不同打印机之间的耗材配置与打印参数。" + +msgid "Features" +msgstr "" + +msgid "Multi device management" +msgstr "多设备管理" + +msgid "" +"With this option enabled, you can send a task to multiple devices at the " +"same time and manage multiple devices." +msgstr "启用此选项后，您可以同时向多个设备发送任务并管理多个设备。" + +msgid "(Requires restart)" +msgstr "" + +msgid "Pop up to select filament grouping mode" +msgstr "" + +msgid "Behaviour" +msgstr "" + +msgid "All" +msgstr "所有" + +msgid "Auto flush after changing..." +msgstr "" + +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "克隆后自动排列打印板" msgid "Touchpad" msgstr "触控板" @@ -6423,10 +7542,16 @@ msgid "" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" -"选择摄像机的导航模式。\n" +"触摸板：Alt+移动进行旋转，Shift+移动进行平移选择摄像机的导航模式。\n" "缺省：鼠标左键+拖动 旋转，鼠标右键+拖动 平移；\n" "触控板：Alt+拖动 旋转，Shift+拖动 平移。" +msgid "Orbit speed multiplier" +msgstr "轨道速度倍数" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "乘以轨道速度以获得更精细或更粗略的相机移动" + msgid "Zoom to mouse position" msgstr "放大到鼠标位置" @@ -6441,131 +7566,117 @@ msgstr "使用自由视角" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "如果启用，使用自由视角。如果未启用，使用约束视角。" +msgid "Swap pan and rotate mouse buttons" +msgstr "交换鼠标按钮的平移与旋转功能" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "启用后，将左键和右键的平移与旋转功能对调" + msgid "Reverse mouse zoom" msgstr "反转鼠标缩放" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "如果启用，使用鼠标滚轮缩放的方向会反转。" -msgid "Show splash screen" -msgstr "显示启动画面" - -msgid "Show the splash screen during startup." -msgstr "在启动时显示启动画面。" - -msgid "Show \"Tip of the day\" notification after start" -msgstr "启动后显示“每日小贴士”通知" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "如果启用，将在启动时显示有用的提示。" - -msgid "Flushing volumes: Auto-calculate everytime the color changed." -msgstr "冲刷体积：每一次更换颜色时自动计算。" - -msgid "If enabled, auto-calculate everytime the color changed." -msgstr "如果启用，会在每一次更换颜色时自动计算。" - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "冲刷体积：每一次更换材料时自动计算。" - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "如果启用，会在每一次更换材料时自动计算。" - -msgid "Remember printer configuration" -msgstr "记住打印机选项" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "如果启用，Orca会自动记录并切换您不同打印机之间的耗材配置与打印参数。" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "多设备管理 （重启Orca后生效）" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "启用此选项后，您可以同时向多个设备发送任务并管理多个设备。" - -msgid "Network" -msgstr "网络" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "同步用户预设（打印机/耗材丝/工艺）" - -msgid "User Sync" -msgstr "用户同步" - -msgid "Update built-in Presets automatically." -msgstr "自动更新系统预设" - -msgid "System Sync" -msgstr "系统同步" - -msgid "Clear my choice on the unsaved presets." -msgstr "清除我对未保存的预置的选择。" - -msgid "Associate files to Snapmaker Orca" -msgstr "Snapmaker Orca文件关联" - -msgid "Associate .3mf files to Snapmaker Orca" -msgstr "使用Snapmaker Orca打开.3mf文件" - -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" -msgstr "开启后，将缺省使用Snapmaker Orca打开.3mf文件" - -msgid "Associate .stl files to Snapmaker Orca" -msgstr "使用Snapmaker Orca打开.stl文件" - -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" -msgstr "开启后，将缺省使用Snapmaker Orca打开.stl文件" - -msgid "Associate .step/.stp files to Snapmaker Orca" -msgstr "使用Snapmaker Orca打开.step/.stp文件" - -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" -msgstr "开启后，将缺省使用Snapmaker Orca打开.step文件" - -msgid "Associate web links to Snapmaker Orca" +msgid "Clear my choice on..." msgstr "" -msgid "Associate URLs to Snapmaker Orca" +msgid "Unsaved projects" msgstr "" -msgid "Maximum recent projects" -msgstr "近期项目的最大数量" - -msgid "Maximum count of recent projects" -msgstr "近期项目的最大计数" - msgid "Clear my choice on the unsaved projects." msgstr "清除我对未保存的项目的选择。" -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "加载具有修改的 G-Code 的 3MF 时不会出现警告" +msgid "Unsaved presets" +msgstr "" -msgid "Auto-Backup" -msgstr "自动备份" +msgid "Clear my choice on the unsaved presets." +msgstr "清除我对未保存的预置的选择。" + +msgid "Synchronizing printer preset" +msgstr "" msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "定期备份你的项目，以便从偶尔的崩溃中恢复过来。" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" -msgid "every" -msgstr "每" +msgid "Login region" +msgstr "登录区域" -msgid "The peroid of backup in seconds." -msgstr "备份的周期" +msgid "Stealth mode" +msgstr "局域网模式" -msgid "Downloads" -msgstr "下载" +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"停止向拓竹科技服务器发送数据。如果您不使用Bambu Lab的打印机或仅使用局域网模" +"式，则可以安全地启用此功能。" -msgid "Dark Mode" -msgstr "深色模式" +msgid "Network test" +msgstr "网络测试" -msgid "Enable Dark mode" -msgstr "启用深色模式" +msgid "Test" +msgstr "测试" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "仅检测正式版的更新" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "同步用户预设（打印机/耗材丝/工艺）" + +msgid "Update built-in Presets automatically." +msgstr "自动更新系统预设" + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "启用网络插件" + +msgid "Use legacy network plugin" +msgstr "使用旧版网络插件" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "禁用以使用支持新BambuLab固件的最新网络插件。" + +msgid "Associate files to Snapmaker Orca" +msgstr "逆戟鲸文件关联" + +#, fuzzy +msgid "Associate 3MF files to Snapmaker Orca" +msgstr "使用逆戟鲸打开.3mf文件" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." +msgstr "开启后，将缺省使用逆戟鲸打开.3mf文件" + +#, fuzzy +msgid "Associate STL files to Snapmaker Orca" +msgstr "使用逆戟鲸打开.stl文件" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." +msgstr "开启后，将缺省使用逆戟鲸打开.stl文件" + +#, fuzzy +msgid "Associate STEP files to Snapmaker Orca" +msgstr "使用逆戟鲸打开.step/.stp文件" + +#, fuzzy +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." +msgstr "开启后，将缺省使用逆戟鲸打开.step文件" + +msgid "Associate web links to Snapmaker Orca" +msgstr "将网页链接关联到Snapmaker Orca" + +msgid "Developer" +msgstr "" msgid "Develop mode" msgstr "开发者模式" @@ -6573,11 +7684,42 @@ msgstr "开发者模式" msgid "Skip AMS blacklist check" msgstr "跳过AMS黑名单检查" -msgid "Home page and daily tips" -msgstr "首页和每日小贴士" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "启动时显示主页" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" + +msgid "Allow Abnormal Storage" +msgstr "" + +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" + +msgid "Log Level" +msgstr "日志级别" + +msgid "fatal" +msgstr "致命" + +msgid "error" +msgstr "错误" + +msgid "warning" +msgstr "警告" + +msgid "debug" +msgstr "调试" + +msgid "trace" +msgstr "跟踪" + +msgid "Debug" +msgstr "" msgid "Sync settings" msgstr "同步设置" @@ -6618,35 +7760,17 @@ msgstr "启用SSL（FTP）" msgid "Internal developer mode" msgstr "内部开发者模式" -msgid "Log Level" -msgstr "日志级别" - -msgid "fatal" -msgstr "致命" - -msgid "error" -msgstr "错误" - -msgid "warning" -msgstr "警告" - -msgid "debug" -msgstr "调试" - -msgid "trace" -msgstr "跟踪" - msgid "Host Setting" -msgstr "" +msgstr "主机设置" msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "" +msgstr "开发主机：api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "" +msgstr "QA主机：api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "" +msgstr "预发布主机：api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "正式环境" @@ -6657,10 +7781,10 @@ msgstr "保存" msgid "save debug settings" msgstr "保存调试设置" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "DEBUG模式生效!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "切换云环境，请重新登录!" msgid "System presets" @@ -6672,14 +7796,20 @@ msgstr "用户配置" msgid "Incompatible presets" msgstr "不兼容的预设" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS 打印丝" -msgid "Click to pick filament color" -msgstr "点击设置材料颜色" +msgid "Right filaments" +msgstr "" -msgid "Please choose the filament colour" -msgstr "请选择材料颜色" +msgid "Click to select filament color" +msgstr "点击设置材料颜色" msgid "Add/Remove presets" msgstr "添加/删除配置" @@ -6690,23 +7820,38 @@ msgstr "编辑预设" msgid "Project-inside presets" msgstr "项目预设" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "添加/删除材料" msgid "Add/Remove materials" msgstr "添加/删除材料" -msgid "Select/Remove printers(system presets)" +msgid "Select/Remove printers (system presets)" msgstr "选择/移除打印机（系统预设）" msgid "Create printer" msgstr "创建打印机" +msgid "Empty" +msgstr "空" + +msgid "Incompatible" +msgstr "不兼容的预设" + msgid "The selected preset is null!" msgstr "选择的预设为空！" msgid "End" -msgstr "" +msgstr "结束" msgid "Customize" msgstr "自定义" @@ -6720,6 +7865,12 @@ msgstr "请输入层号（>=2）。" msgid "Plate name" msgstr "盘名称" +msgid "Same as Global Plate Type" +msgstr "跟随全局打印板类型" + +msgid "Bed type" +msgstr "热床类型" + msgid "Same as Global Print Sequence" msgstr "跟随全局打印顺序" @@ -6738,9 +7889,6 @@ msgstr "旋转花瓶" msgid "First layer filament sequence" msgstr "首层耗材打印顺序" -msgid "Same as Global Plate Type" -msgstr "跟随全局打印板类型" - msgid "Same as Global Bed Type" msgstr "跟随全局热床类型" @@ -6759,28 +7907,28 @@ msgstr "登出" msgid "Slice all plate to obtain time and filament estimation" msgstr "正在切片以获取切片信息和预估打印时间" -msgid "Packing project data into 3mf file" +msgid "Packing project data into 3MF file" msgstr "正在打包数据到3mf文件" -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "正在上传3mf" msgid "Jump to model publish web page" msgstr "跳转到发布页面" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "提示：发布前需要一些准备时间，请耐心等待。" msgid "Publish" msgstr "发布" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "发布已取消" msgid "Slicing Plate 1" msgstr "正在切片盘 1" -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "打包数据到3mf" msgid "Jump to webpage" @@ -6799,7 +7947,7 @@ msgstr "项目预设" msgid "Name is unavailable." msgstr "名称不可用。" -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "不允许覆盖系统预设" #, boost-format @@ -6807,11 +7955,12 @@ msgid "Preset \"%1%\" already exists." msgstr "预设“%1%”已存在。" #, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "预设“%1%”已存在，并且和当前打印机不兼容。" -msgid "Please note that saving action will replace this preset" -msgstr "请注意这个预设会在保存过程中被替换" +msgid "Please note that saving will overwrite this preset." +msgstr "请注意，保存操作将覆盖此预设。" msgid "The name cannot be the same as a preset alias name." msgstr "名称不能和一个预设的别名相同。" @@ -6846,33 +7995,6 @@ msgstr "直接切换到“%1%”" msgid "Task canceled" msgstr "任务已取消" -msgid "(LAN)" -msgstr "（局域网）" - -msgid "Search" -msgstr "搜索" - -msgid "My Device" -msgstr "我的设备" - -msgid "Other Device" -msgstr "其他设备" - -msgid "Online" -msgstr "在线" - -msgid "Input access code" -msgstr "输入访问码" - -msgid "Can't find my devices?" -msgstr "无法找到我的设备？" - -msgid "Log out successful." -msgstr "登出成功。" - -msgid "Busy" -msgstr "忙碌" - msgid "Bambu Cool Plate" msgstr "低温打印板" @@ -6891,14 +8013,53 @@ msgstr "高温打印板" msgid "Bambu Textured PEI Plate" msgstr "纹理PEI打印板" -msgid "Send print job to" -msgstr "发送打印任务至" +msgid "Bambu Cool Plate SuperTack" +msgstr "" + +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" msgstr "动态流量校准" -msgid "Click here if you can't connect to the printer" -msgstr "如果无法连接到打印机，请单击此处" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "发送完成" @@ -6906,50 +8067,15 @@ msgstr "发送完成" msgid "Error code" msgstr "错误代码" -msgid "No login account, only printers in LAN mode are displayed" -msgstr "未登录账号，仅显示局域网模式的打印机" - -msgid "Connecting to server" -msgstr "正在连接服务器..." - -msgid "Synchronizing device information" -msgstr "正在同步设备信息" - -msgid "Synchronizing device information time out" -msgstr "同步设备信息超时" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "设备升级中，无法发送打印任务" - -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "打印机正在执行指令，请在其结束后重新发起打印" - -msgid "The printer is busy on other print job" -msgstr "打印机正在执行其他打印任务" +msgid "High Flow" +msgstr "" #, c-format, boost-format msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "材料编号%s超出AMS槽位数量，请更新打印机固件以支持AMS槽位映射功能" - -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "材料编号超出AMS槽位数量，请更新打印机固件以支持AMS槽位映射功能" - -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"已自动建立 \"耗材丝列表=>AMS槽位\" 的映射关系。 可点击上方具体的耗材丝手动设" -"置其所对应的AMS槽位" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "请在发送打印前点击上方各个耗材丝，指定其所对应的AMS槽位" #, c-format, boost-format msgid "" @@ -6965,35 +8091,12 @@ msgid "" msgstr "" "材料编号和AMS槽位中的耗材丝材质不匹配，请更新打印机固件以支持AMS槽位映射功能" -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"已自动建立 \"耗材丝列表=>AMS槽位\" 的映射关系。 可点击上方具体的耗材丝手动设" -"置其所对应的AMS槽位" - -msgid "An SD card needs to be inserted before printing." -msgstr "请在发起打印前插入SD卡" - #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." -msgstr "所选打印机（%s）与切片软件中选择的打印机配置文件（%s）不兼容。" - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "开启延迟摄影功能需要插入SD卡" - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "需要更新打印机固件后，才能将打印任务发送到打印机" - -msgid "Cannot send the print job for empty plate" -msgstr "无法为空盘发送打印任务" - -msgid "This printer does not support printing all plates" -msgstr "此打印机类型不支持打印所有盘" +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." +msgstr "" msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " @@ -7001,17 +8104,25 @@ msgid "" msgstr "当启用旋转花瓶模式时，I3结构的机器将不会生成延时摄影。" msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." -msgstr "切片参数中开启了逐件打印，无法支持延时摄影。" +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." +msgstr "" msgid "Errors" msgstr "错误" -msgid "Please check the following:" -msgstr "请检查以下内容：" +msgid "" +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" @@ -7026,27 +8137,8 @@ msgstr "" "AMS映射中存在一些未知的耗材。请检查它们是否符合预期。如果符合，按“确定”以开始" "打印任务。" -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "预设中的喷嘴：%s %s" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "记忆中的喷嘴：%.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"切片文件中的喷嘴直径与记忆的喷嘴不一致。如果您最近更换了喷嘴，请前往设备 > 打" -"印机零件进行更改设置。" - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "用%s打印高温材料（%s材料）可能会导致喷嘴损坏" +msgid "Please check the following:" +msgstr "请检查以下内容：" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "请修复上述错误，否则打印无法继续。" @@ -7056,28 +8148,203 @@ msgid "" msgstr "如果您仍然想继续打印，请单击“确定”按钮。" msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "正在连接打印机。连接过程中无法取消。" +"This checks the flatness of heatbed. Leveling makes extruded height uniform." +msgstr "" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgstr "小心使用！纹理PEI板上的流量校准可能会因表面散射而失败。" +"This process determines the dynamic flow values to improve overall print " +"quality." +msgstr "" -msgid "Automatic flow calibration using Micro Lidar" -msgstr "使用微型激光雷达进行自动流量校准" +msgid "Preparing print job" +msgstr "正在准备打印任务" -msgid "Modifying the device name" -msgstr "修改打印机名称" +msgid "The name length exceeds the limit." +msgstr "名称长度超过限制。" -msgid "needed, but current version is " -msgstr "开始支持此预设更新，但是当前的软件版本为 " +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" -msgid "Bind with Pin Code" -msgstr "通过Pin码绑定" +msgid "nozzle" +msgstr "" -msgid "Send to Printer SD card" -msgstr "发送到打印机的SD卡" +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "如果无法连接到打印机，请单击此处" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "未登录账号，仅显示局域网模式的打印机" + +msgid "Connecting to server..." +msgstr "正在连接服务器..." + +msgid "Synchronizing device information..." +msgstr "正在同步设备信息" + +msgid "Synchronizing device information timed out." +msgstr "同步设备信息超时" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "设备升级中，无法发送打印任务" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "打印机正在执行指令，请在其结束后重新发起打印" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "需要更新打印机固件后，才能将打印任务发送到打印机" + +msgid "Cannot send a print job for an empty plate." +msgstr "无法为空盘发送打印任务" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "此打印机类型不支持打印所有盘" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "设备升级中，无法发送打印任务" @@ -7085,14 +8352,14 @@ msgstr "设备升级中，无法发送打印任务" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "所选打印机与选择的打印机预设不兼容。" -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "发送到打印机需要插入SD卡" +msgid "Storage needs to be inserted before send to printer." +msgstr "" msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "打印机需要与Snapmaker Orca在同一个局域网内。" -msgid "The printer does not support sending to printer SD card." -msgstr "该打印机不支持发送到打印机SD卡。" +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." msgstr "切片完成." @@ -7150,7 +8417,7 @@ msgstr "登录失败，请检查Pin码。" msgid "Log in printer" msgstr "登录打印机" -msgid "Would you like to log in this printer with current account?" +msgid "Would you like to log in to this printer with the current account?" msgstr "你想使用当前账号登录这台打印机吗?" msgid "Check the reason" @@ -7163,10 +8430,10 @@ msgid "Terms and Conditions" msgstr "用户使用协议" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" "感谢您购买Bambu Lab设备，使用Bambu Lab设备前，请阅读一下条款，单击同意使用您" @@ -7193,11 +8460,11 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" "在3D打印社区，我们从彼此的成功和失败中学习调整自己的切片参数和设置。%s遵循同" "样的原则，通过机器学习的方式从大量用户打印的成功和失败中获取经验，从而改善打" @@ -7242,14 +8509,29 @@ msgid "Click to reset all settings to the last saved preset." msgstr "点击以将所有设置还原到最后一次保存的版本。" msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您确定要关闭擦料塔" "吗？" msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "同时启用精确Z高度和擦拭塔可能会导致擦拭塔尺寸增大。您仍然要启用吗？" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？" @@ -7258,15 +8540,22 @@ msgid "Still print by object?" msgstr "仍然按对象打印吗？" msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" -"我们增加了一种实验性的风格 \"苗条树\"，它的特点是支撑体积较小，但强度较弱。\n" -"因此我们推荐以下参数：接触层数为0，顶部Z距离为0，墙层数为2。" + +#, fuzzy +msgid "" +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." +msgstr "" +"当使用支撑材料作为支撑接触面时，我们推荐以下设置：\n" +"0顶部Z距离，0接触面间距，交错线性图案并禁用支撑独立层高" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7275,21 +8564,12 @@ msgstr "" "否 - 不用为我调整这些设置" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"对于 \"强壮树 \"和 \"混合树 \"风格，我们推荐以下设置：至少2层界面层，至少0.1" -"毫米的顶部z距离或在界面上使用支撑材料。" - -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"当使用支持界面的支持材料时，我们推荐以下设置：\n" -"0顶层z距离，0接触层间距，同心图案，并且禁用独立支撑层高" msgid "" "Enabling this option will modify the model's shape. If your print requires " @@ -7302,20 +8582,30 @@ msgstr "" msgid "Are you sure you want to enable this option?" msgstr "您确定要启用此选项吗？" +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" "层高太小。\n" +"将设置为min_layer_height\n" +"层高太小。\n" "将自动设置为min_layer_height的值\n" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" "层高超出了打印机设置->挤出机->层高限制中的范围，这可能导致打印质量问题。" -msgid "Adjust to the set range automatically? \n" +msgid "Adjust to the set range automatically?\n" msgstr "是否自动调整到范围内？\n" msgid "Adjust" @@ -7326,18 +8616,18 @@ msgstr "忽略" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离后再切断以最小化冲刷。虽然这" "可以显著减少冲刷，但也可能增加喷嘴堵塞或其他打印问题的风险。" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离后再切断以最小化冲刷。虽然这" "可以显著减少冲刷，但也可能增加喷嘴堵塞或其他打印问题的风险。请配合打印机最新" @@ -7352,6 +8642,77 @@ msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "将创建当前系统预设的副本，该副本将与系统预设分离。" + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "当前自定义预设将与父系统预设分离。" + +msgid "Modifications to the current profile will be saved." +msgstr "将保存对当前配置文件的修改。" + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"此操作不可恢复。\n" +"你想继续吗？" + +msgid "Detach preset" +msgstr "分离预设" + +msgid "This is a default preset." +msgstr "这是默认预设。" + +msgid "This is a system preset." +msgstr "这是一个系统预设。" + +msgid "Current preset is inherited from the default preset." +msgstr "当前预设从默认预设继承。" + +msgid "Current preset is inherited from" +msgstr "当前预设继承自" + +msgid "It can't be deleted or modified." +msgstr "无法删除或修改它。" + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "任何修改都应保存为从此修改继承的新预设。" + +msgid "To do that please specify a new name for the preset." +msgstr "为此，请为预设指定新名称。" + +msgid "Additional information:" +msgstr "附加信息：" + +msgid "vendor" +msgstr "供应商" + +msgid "printer model" +msgstr "打印机型号" + +msgid "default print profile" +msgstr "默认打印配置文件" + +msgid "default filament profile" +msgstr "默认耗材丝配置" + +msgid "default SLA material profile" +msgstr "默认 SLA 材料配置文件" + +msgid "default SLA print profile" +msgstr "默认 SLA 打印配置文件" + +msgid "full profile name" +msgstr "配置全称" + +msgid "symbolic profile name" +msgstr "配置名昵称" + msgid "Line width" msgstr "线宽" @@ -7417,15 +8778,27 @@ msgstr "筏层" msgid "Support filament" msgstr "支撑耗材" +msgid "Support ironing" +msgstr "支撑熨烫" + msgid "Tree supports" msgstr "树状支撑" -msgid "Skirt" -msgstr "裙边" +msgid "Multimaterial" +msgstr "材料" msgid "Prime tower" msgstr "擦拭塔" +msgid "Filament for Features" +msgstr "特征用耗材" + +msgid "Ooze prevention" +msgstr "Ooze 预防" + +msgid "Skirt" +msgstr "裙边" + msgid "Special mode" msgstr "特殊模式" @@ -7472,56 +8845,60 @@ msgstr "建议喷嘴温度" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "该材料的建议喷嘴温度范围。0表示未设置" +msgid "Flow ratio and Pressure Advance" +msgstr "流量和压力提前" + msgid "Print chamber temperature" msgstr "打印仓温度" msgid "Print temperature" msgstr "打印温度" -msgid "Nozzle" -msgstr "喷嘴" - -msgid "Left Nozzle" -msgstr "左喷嘴" - -msgid "Right Nozzle" -msgstr "右喷嘴" - msgid "Nozzle temperature when printing" msgstr "打印时的喷嘴温度" -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "低温打印板（超强粘附）" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"安装低温打印板（超强粘附）时的热床温度。0值表示该材料不支持在低温打印板（超强" +"粘附）上打印。" + +msgid "Cool Plate" msgstr "低温打印热床" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." msgstr "安装低温打印热床时的热床温度。0值表示这个耗材丝不支持低温打印热床" -msgid "Textured Cool plate" -msgstr "纹理低温打印热床" +msgid "Textured Cool Plate" +msgstr "纹理的低温打印床" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" "安装纹理低温打印热床时的热床温度。0值表示这个耗材丝不支持纹理低温打印热床" -msgid "Engineering plate" +msgid "Engineering Plate" msgstr "工程材料热床" msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." msgstr "安装工程材料热床时的热床温度。0值表示这个耗材丝不支持工程材料热床" msgid "Smooth PEI Plate / High Temp Plate" msgstr "光滑PEI板/高温板" msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" "使用光滑PEI热床或高温打印热床时的床温。值0表示耗材不支持在光滑PEI热床或高温打" "印热床上打印" @@ -7530,16 +8907,13 @@ msgid "Textured PEI Plate" msgstr "纹理PEI热床" msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "安装纹理PEI热床时的热床温度。0值表示这个耗材丝不支持纹理PEI热床" msgid "Volumetric speed limitation" msgstr "体积速度限制" -msgid "Cooling" -msgstr "冷却" - msgid "Cooling for specific layer" msgstr "特定层冷却" @@ -7584,28 +8958,37 @@ msgstr "耗材丝起始G-code" msgid "Filament end G-code" msgstr "耗材丝结束G-code" -msgid "Multimaterial" -msgstr "材料" - msgid "Wipe tower parameters" msgstr "色塔参数" -msgid "Toolchange parameters with single extruder MM printers" +msgid "Multi Filament" +msgstr "" + +msgid "Tool change parameters with single extruder MM printers" msgstr "单挤出机多材料打印机的换色参数" -msgid "Ramming settings" -msgstr "尖端成型设置" +msgid "Set" +msgstr "设置" -msgid "Toolchange parameters with multi extruder MM printers" +msgid "Tool change parameters with multi extruder MM printers" msgstr "多挤出机多材料打印机的换色参数" +msgid "Dependencies" +msgstr "依赖" + +msgid "Compatible printers" +msgstr "兼容打印机" + +msgid "Compatible process profiles" +msgstr "兼容的切片配置" + msgid "Printable space" msgstr "可打印区域" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" -msgstr "" +msgstr "参数%1%提供了无效值：%2%" msgid "G-code flavor is switched" msgstr "G-code风格已切换" @@ -7625,7 +9008,7 @@ msgstr "自适应网床" msgid "Accessory" msgstr "配件" -msgid "Machine gcode" +msgid "Machine G-code" msgstr "打印机G-code" msgid "Machine start G-code" @@ -7643,9 +9026,12 @@ msgstr "换层前G-code" msgid "Layer change G-code" msgstr "换层G-code" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "延时摄影G-code" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "耗材丝更换G-code" @@ -7664,6 +9050,12 @@ msgstr "移动能力" msgid "Normal" msgstr "普通" +msgid "Resonance Avoidance" +msgstr "共振规避" + +msgid "Resonance Avoidance Speed" +msgstr "共振规避速度" + msgid "Speed limitation" msgstr "速度限制" @@ -7673,20 +9065,42 @@ msgstr "加速度限制" msgid "Jerk limitation" msgstr "抖动限制" -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "设置单挤出机多材料" +msgid "Number of extruders of the printer." +msgstr "打印机的挤出机数。" + +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"选择单挤出机多材料,\n" +"和所有挤出机必须具有相同的直径。\n" +"是否要将所有挤出机的直径更改为第一挤出机喷嘴直径值？" + +msgid "Nozzle diameter" +msgstr "喷嘴直径" + msgid "Wipe tower" msgstr "色塔" -msgid "Single extruder multimaterial parameters" +msgid "Single extruder multi-material parameters" msgstr "单挤出机多材料参数" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"这是一台单挤出机多材料打印机，所有挤出机的直径都将被设置为新值。您想继续吗？" + msgid "Layer height limits" msgstr "层高限制" -msgid "Lift Z Enforcement" -msgstr "强化抬Z策略" +msgid "Z-Hop" +msgstr "Z轴抬升" msgid "Retraction when switching material" msgstr "切换材料时的回抽量" @@ -7702,6 +9116,14 @@ msgstr "" msgid "Firmware Retraction" msgstr "固件回抽" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "分离的" @@ -7713,7 +9135,7 @@ msgstr "" "该打印机下已关联 %d 个材料预设与 %d 个工艺预设。如删除该打印机，材料与工艺预" "设将一并删除。" -msgid "Presets inherited by other presets can not be deleted!" +msgid "Presets inherited by other presets cannot be deleted!" msgstr "不能删除被其他预设继承的预设！" msgid "The following presets inherit this preset." @@ -7729,23 +9151,17 @@ msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "下列预设将被一起删除。" -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"确定要删除所选预设吗？\n" -"如果预设对应当前在您的打印机上使用的材料，请重新设置该槽位的材料信息。" - #, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "确定要%1%所选预设吗？" -msgid "All" -msgstr "所有" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "设置" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "点击该图标，恢复到全局的配置数值，并与全局配置同步变化。" @@ -7831,7 +9247,7 @@ msgid "" msgstr "预设“%1%”和新的工艺预设不兼容，并且它包含以下未保存的修改：" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " +msgid "You have changed some settings of preset \"%1%\"." msgstr "您已更改了预设 “%1%” 的一些设置。" msgid "" @@ -7861,9 +9277,6 @@ msgstr "" msgid "Extruders count" msgstr "挤出机数量" -msgid "General" -msgstr "常规" - msgid "Capabilities" msgstr "能力" @@ -7875,7 +9288,7 @@ msgstr "选择要比较的预设" msgid "" "You can only transfer to current active profile because it has been modified." -msgstr "" +msgstr "只能传输到当前活动的配置文件，因为它已被修改。" msgid "" "Transfer the selected options from left preset to the right.\n" @@ -7891,7 +9304,7 @@ msgstr "从左到右的转移值" msgid "" "If enabled, this dialog can be used for transfer selected values from left " "to right preset." -msgstr "" +msgstr "如果启用，此对话框可用于将选定的值从左侧预设传输到右侧预设。" msgid "Add File" msgstr "添加文件" @@ -7924,6 +9337,9 @@ msgstr "作者" msgid "Model Name" msgstr "模型名字" +msgid "Description:" +msgstr "描述：" + #, c-format, boost-format msgid "%s Update" msgstr "%s 更新" @@ -7934,22 +9350,19 @@ msgstr "发现新版本" msgid "Configuration update" msgstr "配置更新" -msgid "A new configuration package available, Do you want to install it?" +msgid "A new configuration package is available. Do you want to install it?" msgstr "新的配置包可用，您需要安装吗？" -msgid "Description:" -msgstr "描述：" - msgid "Configuration incompatible" msgstr "配置不兼容" -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "配置包和当前的应用程序不兼容。" #, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" "配置包和当前的应用程序不兼容。\n" "%s会更新配置包，否则无法正常启动" @@ -7958,9 +9371,6 @@ msgstr "" msgid "Exit %s" msgstr "退出 %s" -msgid "the Configuration package is incompatible with current APP." -msgstr "配置包与当前APP不兼容。" - msgid "Configuration updates" msgstr "配置更新" @@ -7970,24 +9380,41 @@ msgstr "没有可用的更新。" msgid "The configuration is up to date." msgstr "当前配置已经是最新版本。" -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" msgstr "Obj文件导入颜色" +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." +msgstr "" + msgid "Specify number of colors:" msgstr "指定颜色数量:" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "颜色数量范围应该是[%d, %d]。" +msgid "Enter or click the adjustment button to modify number again" +msgstr "" msgid "Recommended " msgstr "推荐" -msgid "Current filament colors:" -msgstr "当前耗材丝颜色:" +msgid "view" +msgstr "" -msgid "Quick set:" -msgstr "快捷设置:" +msgid "Current filament colors" +msgstr "" + +msgid "Matching" +msgstr "" + +msgid "Quick set" +msgstr "" msgid "Color match" msgstr "颜色匹配" @@ -7998,31 +9425,171 @@ msgstr "近似的颜色匹配。" msgid "Append" msgstr "追加" -msgid "Add consumable extruder after existing extruders." -msgstr "近似的颜色匹配。" +msgid "Append to existing filaments" +msgstr "" msgid "Reset mapped extruders." msgstr "重置匹配的耗材丝。" -msgid "Cluster colors" -msgstr "重置匹配的耗材丝" - -msgid "Map Filament" -msgstr "匹配耗材丝" +msgid "Note" +msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" -"注意：颜色已经选好了，您可以选中确认 \n" -" 继续或手动修改它。" msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "使用AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "所选打印机（%s）与切片软件中选择的打印机配置文件（%s）不兼容。" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "切片参数中开启了逐件打印，无法支持延时摄影。" + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -"警告：新增追加耗材丝数量 \n" -" 和已有耗材丝数量超过了16." msgid "Ramming customization" msgstr "自定义尖端成型" @@ -8045,36 +9612,24 @@ msgstr "" "端成型过程中的挤压率是需要可调节的。\n" "这是一个专家级别的设置，不正确的调节可能会导致堵塞、挤出机齿轮刨料等。" -msgid "Total ramming time" -msgstr "尖端成型总时间" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "为保持恒定流量，拖动时按住%1%" -msgid "s" -msgstr "秒" +msgid "Total ramming" +msgstr "总顶压" -msgid "Total rammed volume" -msgstr "尖端成型总体积" +msgid "Volume" +msgstr "体积" -msgid "Ramming line width" -msgstr "尖端成型线宽" - -msgid "Ramming line spacing" -msgstr "尖端成型线间距" - -msgid "Auto-Calc" -msgstr "自动计算" - -msgid "Re-calculate" -msgstr "重新计算" - -msgid "Flushing volumes for filament change" -msgstr "耗材丝更换时的冲刷体积" +msgid "Ramming line" +msgstr "顶压线" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" -"Orca 将会在每一次更换耗材颜色时重新计算你的冲刷体积， 你可以在 Snapmaker Orca > " -"偏好设置 中关闭自动计算" msgid "Flushing volume (mm³) for each filament pair." msgstr "在两个耗材丝间切换所需的冲刷量（mm³）" @@ -8087,49 +9642,56 @@ msgstr "建议：冲刷量设置在[%d, %d]范围内" msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "乘数的取值范围是[%.2f, %.2f]" +msgid "Re-calculate" +msgstr "重新计算" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "乘数" -msgid "unloaded" -msgstr "卸载" +msgid "Flushing volumes for filament change" +msgstr "耗材丝更换时的冲刷体积" -msgid "loaded" -msgstr "装载" - -msgid "Filament #" -msgstr "耗材丝#" - -msgid "From" -msgstr "从" - -msgid "To" -msgstr "到" +msgid "Please choose the filament colour" +msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"此任务需要 Windows Media Player！您是否要为您的操作系统启用'Windows Media " +"Player'？" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" -msgstr "" +msgstr "BambuSource 未正确注册用于媒体播放！按是重新注册它。您将被提示两次" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." +"install BambuStudio or seek after-sales help." msgstr "" +"缺少用于媒体播放的已注册 BambuSource 组件！请重新安装 BambuStudio 或寻求售后" +"帮助。" msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." -msgstr "" +msgstr "使用来自不同安装的 BambuSource，视频播放可能无法正常工作！按是修复它。" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"您的系统缺少 GStreamer 所需的 H.264 编解码器，这是播放视频所必需的。（尝试安" +"装 gstreamer1.0-plugins-bad 或 gstreamer1.0-libav 软件包，然后重新启动 Orca " +"Slicer？）" msgid "Bambu Network plug-in not detected." msgstr "未检测到Bambu网络插件。" @@ -8155,12 +9717,6 @@ msgstr "对象列表" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "从STL/STEP/3MF/OBJ/AMF文件中导入几何数据" -msgid "⌘+Shift+G" -msgstr "" - -msgid "Ctrl+Shift+G" -msgstr "" - msgid "Paste from clipboard" msgstr "从剪切板粘贴" @@ -8176,68 +9732,42 @@ msgstr "显示键盘快捷键列表" msgid "Global shortcuts" msgstr "全局快捷键" -msgid "Rotate View" -msgstr "旋转视角" - msgid "Pan View" msgstr "移动视角" -msgid "Mouse wheel" -msgstr "鼠标滚轮" +msgid "Rotate View" +msgstr "旋转视角" msgid "Zoom View" msgstr "缩放视角" -msgid "Shift+A" -msgstr "" - -msgid "Shift+R" -msgstr "" - msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" "自动调整选定零件/所有零件的方向,\n" -"有选定零件时调整选定零件的朝向,没有选择零件时调整当前盘所有零件的朝向" +"有选定零件时调整选定零件的朝向,\n" +"没有选择零件时调整当项目所有零件的朝向" -msgid "Shift+Tab" -msgstr "" +msgid "Auto orients all objects on the active plate." +msgstr "自动调整活动板上的所有物体的方向。" msgid "Collapse/Expand the sidebar" msgstr "收起/展开 侧边栏" -msgid "⌘+Any arrow" -msgstr "⌘+方向键" +msgid "Any arrow" +msgstr "任意箭头" msgid "Movement in camera space" msgstr "沿相机视角移动对象" -msgid "⌥+Left mouse button" -msgstr "⌥+鼠标左键" - msgid "Select a part" msgstr "选择单个零件" -msgid "⌘+Left mouse button" -msgstr "⌘+鼠标左键" - msgid "Select multiple objects" msgstr "选择多个对象" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+方向键" - -msgid "Alt+Left mouse button" -msgstr "Alt+鼠标左键" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+鼠标左键" - -msgid "Shift+Left mouse button" -msgstr "Shift+鼠标左键" - msgid "Select objects by rectangle" msgstr "框选多个零件" @@ -8265,9 +9795,6 @@ msgstr "右箭头" msgid "Move selection 10 mm in positive X direction" msgstr "X方向移动 10mm" -msgid "Shift+Any arrow" -msgstr "Shift+方向键" - msgid "Movement step set to 1 mm" msgstr "沿X、Y轴以1mm为步进移动对象" @@ -8301,17 +9828,23 @@ msgstr "选择所有对象" msgid "Gizmo move" msgstr "线框移动" +msgid "Gizmo rotate" +msgstr "旋转物件" + msgid "Gizmo scale" msgstr "线框缩放" -msgid "Gizmo rotate" -msgstr "旋转物件" +msgid "Gizmo place face on bed" +msgstr "选择底面" msgid "Gizmo cut" msgstr "剪切物件" -msgid "Gizmo Place face on bed" -msgstr "选择底面" +msgid "Gizmo mesh boolean" +msgstr "线框网格布尔操作" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM手绘绒毛表面" msgid "Gizmo SLA support points" msgstr "SLA支撑点" @@ -8319,8 +9852,17 @@ msgstr "SLA支撑点" msgid "Gizmo FDM paint-on seam" msgstr "FDM涂装接缝" -msgid "Gizmo Text emboss / engrave" -msgstr "Gizmo文本浮雕/雕刻" +msgid "Gizmo text emboss/engrave" +msgstr "线框文本浮雕/雕刻" + +msgid "Gizmo measure" +msgstr "线框测量" + +msgid "Gizmo assemble" +msgstr "线框组合" + +msgid "Gizmo brim ears" +msgstr "线框耳状帽檐" msgid "Zoom in" msgstr "放大" @@ -8337,31 +9879,19 @@ msgstr "准备" msgid "Move: press to snap by 1mm" msgstr "移动：以1mm为步进移动" -msgid "⌘+Mouse wheel" -msgstr "⌘+鼠标滚轮" - msgid "Support/Color Painting: adjust pen radius" msgstr "支撑/颜色绘制：调节画笔半径" -msgid "⌥+Mouse wheel" -msgstr "⌥+鼠标滚轮" - msgid "Support/Color Painting: adjust section position" msgstr "支撑/色彩绘制：调节剖面位置" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+鼠标滚轮" - -msgid "Alt+Mouse wheel" -msgstr "Alt+鼠标滚轮" - msgid "Gizmo" -msgstr "" +msgstr "小工具" msgid "Set extruder number for the objects and parts" msgstr "设置对象、零件使用的挤出机编号" -msgid "Delete objects, parts, modifiers " +msgid "Delete objects, parts, modifiers" msgstr "删除对象、零件、修改器" msgid "Select the object/part and press space to change the name" @@ -8391,26 +9921,23 @@ msgstr "水平滑动条 - 向右移动一步" msgid "On/Off one layer mode of the vertical slider" msgstr "开启/关闭垂直滑动条的单层模式" -msgid "On/Off g-code window" -msgstr "开启/关闭g-code窗口" +msgid "On/Off G-code window" +msgstr "开启/关闭G-code窗口" msgid "Move slider 5x faster" msgstr "5倍速移动滑动条" -msgid "Shift+Mouse wheel" -msgstr "Shift+鼠标滚轮" - msgid "Horizontal slider - Move to start position" -msgstr "" +msgstr "水平滑块 - 移动到起始位置" msgid "Horizontal slider - Move to last position" -msgstr "" +msgstr "水平滑块 - 移动到末尾位置" msgid "Release Note" msgstr "更新说明" #, c-format, boost-format -msgid "version %s update information :" +msgid "version %s update information:" msgstr "版本 %s 更新信息" msgid "Network plug-in update" @@ -8421,7 +9948,7 @@ msgid "" msgstr "点击\"确定\"，将在Snapmaker Orca下次启动之后自动升级网络插件" #, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" +msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "新的网络插件(%s) 可用，您是否需要安装它？" msgid "New version of Snapmaker Orca" @@ -8430,77 +9957,71 @@ msgstr "新版本的Snapmaker Orca" msgid "Skip this Version" msgstr "跳过本版本" -msgid "Done" -msgstr "完成" - -msgid "resume" -msgstr "继续" - -msgid "Resume Printing" -msgstr "继续打印" - -msgid "Resume Printing(defects acceptable)" -msgstr "继续打印（缺陷可接受）" - -msgid "Resume Printing(problem solved)" -msgstr "继续打印（问题已解决）" - -msgid "Stop Printing" -msgstr "停止打印" - -msgid "Check Assistant" -msgstr "前往机器助手" - -msgid "Filament Extruded, Continue" -msgstr "耗材已挤出，继续" - -msgid "Not Extruded Yet, Retry" -msgstr "耗材未挤出，重试" - -msgid "Finished, Continue" -msgstr "已完成，继续" - -msgid "Load Filament" -msgstr "进料" - -msgid "Filament Loaded, Resume" -msgstr "耗材已加载，继续" - -msgid "View Liveview" -msgstr "查看LiveView" - msgid "Confirm and Update Nozzle" msgstr "确认并更新喷嘴" -msgid "LAN Connection Failed (Sending print file)" -msgstr "LAN连接失败 (发送打印文件)" +msgid "Connect the printer using IP and access code" +msgstr "使用IP和访问代码连接打印" msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." -msgstr "第1步，请确认Snapmaker Orca和您的打印机在同一个LAN上。" +"Try the following methods to update the connection parameters and reconnect " +"to the printer." +msgstr "" + +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." -msgstr "步骤2, 如果下面的IP和访问码与打印机上的实际值不同，请输入正确的值。" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." +msgstr "" msgid "IP" -msgstr "" +msgstr "IP地址" msgid "Access Code" msgstr "访问码" +msgid "Printer model" +msgstr "打印机模型" + +msgid "Printer name" +msgstr "打印机名称" + msgid "Where to find your printer's IP and Access Code?" msgstr "在哪里可以找到打印机的IP和访问码?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "步骤3，请ping打印机的IP地址，以此检查丢包和延迟。" +msgid "Connect" +msgstr "连接" -msgid "Test" -msgstr "测试" +msgid "Manual Setup" +msgstr "手动设置" msgid "IP and Access Code Verified! You may close the window" -msgstr "IP地址和访问码验证成功！您可以关闭此窗口。" +msgstr "" + +msgid "connecting..." +msgstr "连接中..." + +msgid "Failed to connect to printer." +msgstr "无法连接到打印机" + +msgid "Failed to publish login request." +msgstr "发布登录请求失败" + +msgid "The printer has already been bound." +msgstr "打印机已绑定。" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "打印机模式不正确，请切换到仅局域网。" + +msgid "Connecting to printer... The dialog will close later" +msgstr "连接打印机中… 对话框稍后将自动关闭。" msgid "Connection failed, please double check IP and Access Code" msgstr "连接失败，请再次检查IP地址和访问码。" @@ -8512,31 +10033,51 @@ msgstr "" "连接失败！如果您的IP地址和访问码是正确的，\n" "请查看第三步的提示，以便定位网络问题所在。" +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "气泵" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "切割模块" + +msgid "Auto Fire Extinguishing System" +msgstr "" + msgid "Model:" msgstr "型号：" -msgid "Serial:" -msgstr "序列号：" - -msgid "Version:" -msgstr "版本：" - msgid "Update firmware" msgstr "更新固件" msgid "Beta version" msgstr "Beta版本" -msgid "Latest version" -msgstr "最新版本" - msgid "Updating" msgstr "更新中" -msgid "Updating failed" +msgid "Update failed" msgstr "更新失败" -msgid "Updating successful" +msgid "Update successful" msgstr "更新成功" msgid "" @@ -8563,7 +10104,7 @@ msgstr "" msgid "Extension Board" msgstr "扩展板" -msgid "Saving objects into the 3mf failed." +msgid "Saving objects into the 3MF failed." msgstr "保存对象到3mf失败。" msgid "Only Windows 10 is supported." @@ -8587,22 +10128,22 @@ msgstr "修复失败。" msgid "Loading repaired objects" msgstr "正在加载修复的对象。" -msgid "Exporting 3mf file failed" +msgid "Exporting 3MF file failed" msgstr "导出3mf失败" -msgid "Import 3mf file failed" +msgid "Import 3MF file failed" msgstr "导入3mf失败" -msgid "Repaired 3mf file does not contain any object" +msgid "Repaired 3MF file does not contain any object" msgstr "已修复的3mf文件不包含任何对象" -msgid "Repaired 3mf file contains more than one object" +msgid "Repaired 3MF file contains more than one object" msgstr "已修复的3mf文件包含了不止一个对象" -msgid "Repaired 3mf file does not contain any volume" +msgid "Repaired 3MF file does not contain any volume" msgstr "修复的3mf文件不包含任何零件" -msgid "Repaired 3mf file contains more than one volume" +msgid "Repaired 3MF file contains more than one volume" msgstr "已修复的3mf文件包含多个零件" msgid "Repair finished" @@ -8619,10 +10160,10 @@ msgid "Need to check the unsaved changes before configuration updates." msgstr "需要在配置更新之前检查没有保存的参数修改。" msgid "Configuration package: " -msgstr "" +msgstr "配置包：" msgid " updated to " -msgstr "" +msgstr "更新到" msgid "Open G-code file:" msgstr "打开G-code文件：" @@ -8649,7 +10190,12 @@ msgid "No object can be printed. Maybe too small" msgstr "没有可打印的对象。可能是因为尺寸过小。" msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "你的指纹非常接近启动区域。确保没有碰撞。" + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "由于错误的自定义G-code，G-code生成失败。\n" @@ -8662,6 +10208,15 @@ msgstr "请检查自定义G-code，或者使用默认的。" msgid "Generating G-code: layer %1%" msgstr "正在生成G-code：层%1%" +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" + msgid "Inner wall" msgstr "内墙" @@ -8699,7 +10254,7 @@ msgid "Multiple" msgstr "多个" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " msgstr "计算 %1%的线宽失败。无法获得 \"%2%\" 的值" msgid "" @@ -8813,12 +10368,14 @@ msgstr "%1%离其它对象太近，可能会发生碰撞。" msgid "%1% is too tall, and collisions will be caused." msgstr "%1%太高，会发生碰撞。" -msgid " is too close to others, there may be collisions when printing." -msgstr "离其它对象太近，打印时可能会发生碰撞。" - msgid " is too close to exclusion area, there may be collisions when printing." msgstr "离不可打印区域太近，打印时可能会发生碰撞。" +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" + msgid "Prime Tower" msgstr "擦拭塔" @@ -8829,11 +10386,34 @@ msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "离不可打印区域太近，会发生碰撞。\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"不能将温度差异过大的材料一起打印。否则挤出机和喷嘴在打印中可能被堵塞或损坏" msgid "No extrusions under current settings." msgstr "根据当前设置，不会生成任何打印。" @@ -8843,6 +10423,15 @@ msgid "" "enabled." msgstr "平滑模式的延时摄影不支持在逐件打印模式下使用。" +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" + msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." @@ -8853,6 +10442,12 @@ msgid "" "materials." msgstr "不支持在包含多个材料的打印中使用旋转花瓶模式。" +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" + #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "对象 %1% 超过了最大构建体积高度" @@ -8872,9 +10467,10 @@ msgid "Variable layer height is not supported with Organic supports." msgstr "Organic支撑不支持可变层高。" msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." -msgstr "启用擦拭塔时，不允许使用不同的喷嘴直径和不同的材料直径。" +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." +msgstr "" msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -8884,8 +10480,9 @@ msgstr "" "塔。" msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." -msgstr "当启用擦拭塔时，目前不支持防滴功能。" +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." +msgstr "只有当'single_extruder_multi_material'关闭时，擦拭塔才支持防渗。" msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " @@ -8902,17 +10499,23 @@ msgid "" "requires that all objects have the same layer height." msgstr "不支持在可变层高开启时使用擦拭塔。它要求所有对象拥有相同的层高。" -msgid "The prime tower requires \"support gap\" to be multiple of layer height" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." msgstr "擦拭塔要求”支撑间隙“为层高的整数倍。" -msgid "The prime tower requires that all objects have the same layer heights" +msgid "The prime tower requires that all objects have the same layer heights." msgstr "擦拭塔要求各个对象拥有同样的层高。" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" +"of raft layers." msgstr "擦拭塔要求各个对象使用同样的筏层数量。" +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" + msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." @@ -8920,15 +10523,26 @@ msgstr "擦拭塔要求各个对象拥有同样的层高。" msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" +"layer height." msgstr "各个对象的层高存在差异，无法启用擦料塔" +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "" + msgid "Too small line width" msgstr "线宽太小" msgid "Too large line width" msgstr "线宽太大" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" + msgid "" "The prime tower requires that support has the same layer height with object." msgstr "擦拭塔要求支撑和对象采用同样的层高。" @@ -8952,7 +10566,7 @@ msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "使用了支撑添加器但没有打开支撑。请打开支撑。" -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "层高不能超过喷嘴直径" msgid "" @@ -8994,6 +10608,15 @@ msgstr "" "Orca将自动限制抖动速度，以确保不超过打印机的速度限制。\n" "您可以调整打印机配置中的最大抖动速度设置，以获得更高的速度。" +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" + msgid "" "The acceleration setting exceeds the printer's maximum acceleration " "(machine_max_acceleration_extruding).\n" @@ -9020,6 +10643,16 @@ msgstr "" "Orca将自动限制加速度，以确保不超过打印机的速度限制。\n" "您可以调整打印机配置中的machine_max_acceleration_travel值，以获得更高的速度。" +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "当壁序列为外内或内外内时，精确墙壁选项将被忽略。" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "" + msgid "Generating skirt & brim" msgstr "正在生成skirt和brim" @@ -9032,9 +10665,15 @@ msgstr "正在生成G-code" msgid "Failed processing of the filename_format template." msgstr "处理文件名格式模板失败。" +msgid "Printer technology" +msgstr "打印机类型" + msgid "Printable area" msgstr "可打印区域" +msgid "Extruder printable area" +msgstr "" + msgid "Bed exclude area" msgstr "不可打印区域" @@ -9056,8 +10695,8 @@ msgid "Elephant foot compensation" msgstr "象脚补偿" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "将首层收缩用于补偿象脚效应" msgid "Elephant foot compensation layers" @@ -9075,19 +10714,27 @@ msgstr "层" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" +"more printing time." msgstr "每一层的切片高度。越小的层高意味着更高的精度和更长的打印时间。" msgid "Printable height" msgstr "可打印高度" -msgid "Maximum printable height which is limited by mechanism of printer" +msgid "Maximum printable height which is limited by mechanism of printer." msgstr "由打印机结构约束的最大可打印高度" +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" + msgid "Preferred orientation" msgstr "零件朝向偏好" -msgid "Automatically orient stls on the Z-axis upon initial import" +msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "导入模型时自动旋转到指定的朝向" msgid "Printer preset names" @@ -9096,7 +10743,7 @@ msgstr "打印机预设名" msgid "Use 3rd-party print host" msgstr "启用第三方网络连接" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "允许通过第三方网络连接控制BambuLab的打印机" msgid "Hostname, IP or URL" @@ -9117,7 +10764,7 @@ msgid "Device UI" msgstr "设备用户界面" msgid "" -"Specify the URL of your device user interface if it's not same as print_host" +"Specify the URL of your device user interface if it's not same as print_host." msgstr "如果打印机的设备用户界面的URL不同，请在此指定。" msgid "API Key / Password" @@ -9130,7 +10777,7 @@ msgstr "" "Snapmaker Orca可以将G-code文件上传到打印机主机。此字段应包含用于身份验证的API密" "钥或密码。" -msgid "Name of the printer" +msgid "Name of the printer." msgstr "打印机名称" msgid "HTTPS CA File" @@ -9161,7 +10808,7 @@ msgstr "" "在缺少或离线分发点的情况下忽略HTTPS证书吊销检查。如果连接失败，可以启用此选项" "来处理自签名证书。" -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "与物理打印机相关的预设名称" msgid "Authorization Type" @@ -9173,20 +10820,21 @@ msgstr "API秘钥" msgid "HTTP digest" msgstr "HTTP摘要" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "避免跨越外墙" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "空驶时绕过外墙以避免在模型外观面产生斑点" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "避免跨越外墙-最大绕行长度" msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" "避免跨越外墙时的最大绕行距离。当绕行距离比这个数值大时，此次空驶不绕行。绕行" "距离可表达为绝对值，或者相对直线空驶长度的百分比(例如50%)。0表示禁用" @@ -9198,31 +10846,35 @@ msgid "Other layers" msgstr "其它层" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "非首层热床温度。0值表示这个耗材丝不支持低温打印热床" - -msgid "°C" -msgstr "°C" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." +msgstr "" +"除首层外的其他层的热床温度。0值表示该耗材丝不支持在Cool Plate SuperTack上打" +"印。" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "非首层热床温度。0值表示这个耗材丝不支持低温打印热床" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." msgstr "非首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." msgstr "非首层热床温度。0值表示这个耗材丝不支持工程材料热床" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." msgstr "非首层热床温度。0值表示这个耗材丝不支持高温打印热床" msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." msgstr "非首层热床温度。0值表示这个耗材丝不支持纹理PEI热床" msgid "Initial layer" @@ -9232,44 +10884,50 @@ msgid "Initial layer bed temperature" msgstr "首层床温" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持工程材料热床" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持高温打印热床" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持纹理PEI热床" -msgid "Bed types supported by the printer" +msgid "Bed types supported by the printer." msgstr "打印机所支持的热床类型" msgid "Smooth Cool Plate" msgstr "光滑的低温打印床" -msgid "Engineering Plate" -msgstr "工程材料热床" - msgid "Smooth High Temp Plate" msgstr "光滑高温打印热床" -msgid "Textured Cool Plate" -msgstr "纹理的低温打印床" +msgid "Default bed type" +msgstr "默认热床类型" + +msgid "" +"Default bed type for the printer (supports both numeric and string format)." +msgstr "打印机的默认热床类型（支持数字和字符串格式）。" msgid "First layer print sequence" msgstr "第一层打印顺序" @@ -9283,7 +10941,7 @@ msgstr "其他层的打印顺序数量" msgid "Other layers filament sequence" msgstr "其他层的耗材打印顺序" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "在每次换层抬升z高度之前插入这段G-code" msgid "Bottom shell layers" @@ -9292,7 +10950,7 @@ msgstr "底部壳体层数" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "底部壳体实心层层数，包括底面。当由该层数计算的厚度小于底部壳体厚度，切片时会" "增加底部壳体的层数" @@ -9304,8 +10962,8 @@ msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "如果由底部壳体层数算出的厚度小于这个数值，那么切片时将自动增加底部壳体层数。" "这能够避免当层高很小时，底部壳体过薄。0表示关闭这个设置，同时底部壳体的厚度完" @@ -9315,14 +10973,31 @@ msgid "Apply gap fill" msgstr "启用间隙填充" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" msgid "Everywhere" @@ -9334,63 +11009,131 @@ msgstr "仅顶层和底层" msgid "Nowhere" msgstr "不填充" -msgid "Force cooling for overhang and bridge" +msgid "Force cooling for overhangs and bridges" msgstr "悬垂/桥接强制冷却" msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" -msgstr "勾选这个选项将自动优化桥接和悬垂的风扇转速以获得更好的冷却" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." +msgstr "" +"启用此选项以允许单独针对悬垂、内部桥接和外部桥接调整部件冷却风扇的速度。针对" +"这些特性设置风扇速度可以提高整体打印质量并减少翘曲。" -msgid "Fan speed for overhang" -msgstr "悬垂风扇速度" +msgid "Overhangs and external bridges fan speed" +msgstr "悬垂和外部桥接风扇速度" msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" -"当打印桥接和超过设定阈值的悬垂时，强制部件冷却风扇为设定的速度值。强制冷却能" -"够使悬垂和桥接获得更好的打印质量" +"当打印桥接结构或悬垂墙体时，如果悬垂程度超过上述“悬垂冷却阈值”所设定的值，则" +"使用此部件冷却风扇速度。专门针对悬垂和桥接加大冷却力度，有助于提升这些特征整" +"体的打印质量。\n" +"\n" +"请注意，此风扇速度的下限受前面设置的最小风扇速度阈值限制；当打印层时间未达到" +"最小层时间阈值时，会相应上调至最大风扇速度阈值。" -msgid "Cooling overhang threshold" -msgstr "冷却悬空阈值" +msgid "Overhang cooling activation threshold" +msgstr "悬垂冷却激活阈值" -#, c-format +#, no-c-format, no-boost-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." msgstr "" -"当打印件的悬空程度超过此值时，强制冷却风扇达到特定速度。用百分比表示，表明没" -"有下层支撑的线的宽度是多少。0%%意味着无论悬垂程度如何，都要对所有外壁强制冷" -"却。" +"当悬垂超过此指定阈值时，强制部件冷却风扇按照下方设置的“悬垂风扇速度”运转。该" +"阈值以百分比表示，指示每条走线宽度中未被下层支撑的部分。将此值设置为0%即使在" +"任何悬垂条件下也会使风扇运转于所有外壁。" -msgid "Bridge infill direction" -msgstr "拉桥填充方向" +msgid "External bridge infill direction" +msgstr "外部桥接填充方向" +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "搭桥角度覆盖。如果设置为零，该角度将自动计算。否则外部的桥接将用提供的值。" "180°表示0度。" -msgid "Bridge density" -msgstr "搭桥密度" +msgid "Internal bridge infill direction" +msgstr "内部桥接填充方向" -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "外部桥接的密度。100%意味着实心桥。默认值为100%。" +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" +"内部桥接角度覆盖。如果设置为0，则桥接角度将自动计算；否则将采用所提供的角度用" +"于内部桥接。使用180°表示0角度。\n" +"\n" +"建议保持此值为0，除非有特殊模型要求。" + +msgid "External bridge density" +msgstr "外部桥接密度" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"控制外部桥接线的密度（间距）。100% 表示实心桥接，默认值为 100%。\n" +"\n" +"较低密度的外部桥接可提高可靠性，因为桥梁周围有更多空间供空气循环，从而增强冷" +"却效果。" + +msgid "Internal bridge density" +msgstr "内部桥接密度" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"控制内部桥接线的密度（间距）。100% 表示实心桥接，默认值为 100%。\n" +"\n" +"较低密度的内部桥接有助于减少顶面起鼓现象，并提高内部桥接的可靠性，因为挤出桥" +"梁周围有更多空间供空气循环，加快冷却速度。\n" +"\n" +"此选项与第二层内部桥接覆盖填充功能结合使用时尤为有效，可在挤出实心填充前进一" +"步改善内部桥接结构。" msgid "Bridge flow ratio" msgstr "桥接流量" msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" -msgstr "稍微减小这个数值（比如0.9）可以减小桥接的材料量，来改善下垂。" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Internal bridge flow ratio" msgstr "内部搭桥流量比例" @@ -9398,7 +11141,11 @@ msgstr "内部搭桥流量比例" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" msgid "Top surface flow ratio" @@ -9406,31 +11153,136 @@ msgstr "顶部表面流量比例" msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" -msgstr "稍微减小这个数值（比如0.97）可以来改善顶面的光滑程度。" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Bottom surface flow ratio" msgstr "底部表面流量比例" -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "首层流量调整系数，默认为1.0" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" msgid "Precise wall" msgstr "精准外墙尺寸" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" +"通过调整墙壁间距来提高外墙精度，同时改善层间一致性。注意：当壁序列为外内或内" +"外内时，此选项将被忽略。" msgid "Only one wall on top surfaces" msgstr "顶面单层墙" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "顶面只使用单层墙，从而更多的空间能够使用顶部填充图案" msgid "One wall threshold" @@ -9458,7 +11310,7 @@ msgstr "首层仅单层墙" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "首层只使用单层墙，从而更多的空间能够使用底部填充图案" msgid "Extra perimeters on overhangs" @@ -9466,24 +11318,24 @@ msgstr "悬垂上的额外周长" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "在陡峭的悬垂和无法固定桥接的区域上创建额外的周长路径。" -msgid "Reverse on odd" -msgstr "反转奇数层悬垂方向" +msgid "Reverse on even" +msgstr "反转偶数层悬垂方向" msgid "Overhang reversal" msgstr "悬垂反转" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" -"在奇数层上，将悬垂部分的走线反转。这种交替的走线模式可以大大改善陡峭的悬" +"在偶数层上，将悬垂部分的走线反转。这种交替的走线模式可以大大改善陡峭的悬" "垂。\n" "\n" "这个设置也可以帮助减少零件变形，因为零件墙壁的应力减少了。" @@ -9492,7 +11344,7 @@ msgid "Reverse only internal perimeters" msgstr "仅反转内部墙壁" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9501,9 +11353,9 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" "仅在内墙上应用反转墙壁逻辑。\n" "\n" @@ -9511,7 +11363,7 @@ msgstr "" "形，同时保持外墙的质量。这个功能对于易变形的材料非常有用，比如ABS/ASA，也对于" "弹性耗材，比如TPU和丝光PLA。它还可以帮助减少支撑上的悬空区域的变形。\n" "\n" -"为了使这个设置最有效，建议将反转阈值设置为0，这样所有的内墙都会在奇数层交替打" +"为了使这个设置最有效，建议将反转阈值设置为0，这样所有的内墙都会在偶数层交替打" "印。" msgid "Bridge counterbore holes" @@ -9520,9 +11372,9 @@ msgstr "沉孔搭桥" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "此选项为沉孔创建搭桥，使其可以在无支撑的情况下打印。可用的模式包括：\n" "1. 无：不创建搭桥。\n" @@ -9545,55 +11397,83 @@ msgstr "悬垂反转阈值" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." -msgstr "判定悬垂反转需要的值（毫米），可以是线宽的百分比。" - -msgid "Classic mode" -msgstr "经典模式" - -msgid "Enable this option to use classic mode" -msgstr "启用此选项以使用经典模式" +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." +msgstr "" +"判定悬垂反转需要的值（毫米），可以是线宽的百分比。\n" +"值0表示在每个偶数层上都启用反转。\n" +"当未启用检测悬垂时，此选项将被忽略，反转将在每个偶数层上发生。" msgid "Slow down for overhang" msgstr "悬垂降速" -msgid "Enable this option to slow printing down for different overhang degree" +msgid "Enable this option to slow printing down for different overhang degree." msgstr "启用此选项将降低不同悬垂程度的走线的打印速度" msgid "Slow down for curled perimeters" msgstr "翘边降速" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" -msgstr "启用这个选项，降低可能存在卷曲部位的打印速度" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." +msgstr "" +"启用此选项以降低可能向上翘曲的周长区域的打印速度。例如，在打印Benchy船体前部" +"等尖锐角落的悬垂时，将应用额外的减速，减少在多层中复合的翘曲。\n" +"\n" +"通常建议启用此选项，除非您的打印机冷却足够强大或打印速度足够慢，以至于周长翘" +"曲不会发生。如果以较高的外部周长速度打印，由于打印速度的巨大差异，此参数在减" +"速时可能会引入轻微的伪影。如果您注意到伪影，请确保您的压力提前已正确调整。\n" +"\n" +"注意：启用此选项时，悬垂周长将被视为悬垂，这意味着即使悬垂周长是桥接的一部" +"分，也会应用悬垂速度。例如，当周长100%悬垂，没有墙壁从下方支撑时，将应用100%" +"悬垂速度。" msgid "mm/s or %" msgstr "mm/s 或 %" -msgid "External" -msgstr "外部" - -msgid "Speed of bridge and completely overhang wall" -msgstr "桥接和完全悬空的外墙的打印速度" - -msgid "mm/s" -msgstr "mm/s" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"外部可见桥接挤出的速度。\n" +"\n" +"此外，如果禁用翘曲周长减速或启用经典悬垂模式，它将是支撑少于13%的悬垂墙的打印" +"速度，无论它们是桥接还是悬垂的一部分。" msgid "Internal" msgstr "内部" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"内部桥接的速度。如果该值以百分比表示，则将根据桥接速度进行计算。默认值为" -"150%。" +"内部桥接的速度。如果该值以百分比表示，将基于桥接速度计算。默认值为150%。" msgid "Brim width" msgstr "Brim宽度" -msgid "Distance from model to the outermost brim line" +msgid "Distance from model to the outermost brim line." msgstr "从模型到最外圈brim走线的距离" msgid "Brim type" @@ -9601,7 +11481,7 @@ msgstr "Brim类型" msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" "该参数控制在模型的外侧和/或内侧生成brim。自动是指自动分析和计算边框的宽度。" @@ -9610,7 +11490,7 @@ msgstr "Brim与模型的间隙" msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" +"easily." msgstr "在brim和模型之间设置间隙，能够让brim更容易剥离" msgid "Brim ears" @@ -9623,8 +11503,8 @@ msgid "Brim ear max angle" msgstr "圆盘最大角度" msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "让圆盘出现的最大角度。\n" @@ -9635,29 +11515,42 @@ msgid "Brim ear detection radius" msgstr "圆盘检测半径" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "在检测尖锐角度之前，几何形状将被简化。此参数表示简化的最小偏差长度。\n" "设为0以停用" -msgid "Compatible machine" -msgstr "兼容的机器" +msgid "Select printers" +msgstr "选择打印机" msgid "upward compatible machine" msgstr "向上兼容的机器" -msgid "Compatible machine condition" -msgstr "兼容的机器的条件" +msgid "Condition" +msgstr "条件" -msgid "Compatible process profiles" -msgstr "兼容的切片配置" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"使用活动打印机配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置" +"文件将被视为与活动打印机配置文件兼容。" -msgid "Compatible process profiles condition" -msgstr "兼容的切片配置的条件" +msgid "Select profiles" +msgstr "选择配置文件" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"使用活动打印配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置文" +"件将被视为与活动打印配置文件兼容。" + +msgid "Print sequence, layer by layer or object by object." msgstr "打印顺序，逐层打印或者逐件打印" msgid "By layer" @@ -9669,7 +11562,7 @@ msgstr "逐件" msgid "Intra-layer order" msgstr "层内打印顺序" -msgid "Print order within a single layer" +msgid "Print order within a single layer." msgstr "同一层内的打印顺序" msgid "As object list" @@ -9682,7 +11575,7 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" "勾选这个选项，将降低打印速度，使得最终的层打印时间不小于\"最大风扇速度阈值" "\"里的层时间阈值，从而使得该层获得更久的冷却。这能够改善尖顶和小细节的冷却效" @@ -9693,22 +11586,19 @@ msgstr "普通打印" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "除首层之外的默认的打印和空驶的加速度" -msgid "mm/s²" -msgstr "mm/s²" - msgid "Default filament profile" msgstr "默认耗材配置" -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "该机器配置的默认耗材配置" msgid "Default process profile" msgstr "默认切片配置" -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "该机器的默认切片配置" msgid "Activate air filtration" @@ -9721,19 +11611,19 @@ msgid "Fan speed" msgstr "风扇速度" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" -msgstr "打印过程中排气风扇的速度。此速度将覆盖耗材丝自定义gcode中的速度" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." +msgstr "打印过程中排气风扇的速度。此速度将覆盖耗材丝自定义G-code中的速度。" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "打印完成后排气风扇的速度" msgid "No cooling for the first" msgstr "关闭冷却对前" msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" "对开始的一些层关闭所有的部件冷却风扇。通常关闭首层冷却用来获得更好的热床粘接" @@ -9741,14 +11631,14 @@ msgid "Don't support bridges" msgstr "不支撑桥接" msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "不对整个桥接面进行支撑，否则支撑体会很大。不是很长的桥接通常可以无支撑直接打" "印。" -msgid "Thick bridges" -msgstr "厚桥" +msgid "Thick external bridges" +msgstr "外部搭桥用厚桥" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -9769,59 +11659,111 @@ msgstr "" "如果启用，将使用厚内部桥接。通常建议打开此功能。但是，如果您使用大喷嘴，请考" "虑关闭它。" -msgid "Don't filter out small internal bridges (beta)" -msgstr "保留细微内部桥接（试验）" +msgid "Extra bridge layers (beta)" +msgstr "额外桥层（测试版）" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" -"此选项可以帮助减少在严重倾斜或弯曲模型的顶部表面上的枕头现象。\n" +"此选项启用在内部和/或外部桥接上生成额外桥接层。\n" "\n" -"默认情况下，小的内部搭桥会被过滤掉，内部实心填充会直接打印在稀疏填充上。这在" -"大多数情况下效果很好，可以加快打印速度，而对顶部表面质量的影响不大。\n" +"额外桥接层有助于改善桥接的外观和可靠性，因为实心填充得到了更好的支撑。这对于" +"快速打印机特别有用，因为桥接和实心填充的速度差异很大。额外的桥接层可以减少顶" +"面的枕化效应，同时减少外部桥接层与其周围周长的分离。\n" "\n" -"然而，在严重倾斜或弯曲的模型中，特别是在使用了过低的稀疏填充密度的情况下，这" -"可能会导致不支撑的实心填充卷曲，从而导致枕头现象。\n" +"通常建议将此设置为至少'仅外部桥接'，除非发现切片模型存在特定问题。\n" "\n" -"启用此选项将在轻微不支撑的内部实心填充上打印内部搭桥层。下面的选项控制过滤的" -"程度，即创建的内部搭桥的数量。\n" -"\n" -"禁用 - 禁用此选项。这是默认行为，在大多数情况下效果很好。\n" -"\n" -"有限过滤 - 在严重倾斜的表面上创建内部搭桥，同时避免创建不必要的内部搭桥。这对" -"大多数困难模型效果很好。\n" -"\n" -"无过滤 - 在每个潜在的内部悬垂上创建内部搭桥。这个选项对于严重倾斜的顶部表面模" -"型很有用。然而，在大多数情况下，它会创建太多不必要的桥接。" +"选项：\n" +"1. 禁用 - 不生成第二桥接层。这是默认设置，出于兼容性目的而设置\n" +"2. 仅外部桥接 - 仅为面向外部的桥接生成第二桥接层。请注意，比设置的周长数更短" +"或更窄的小桥接将被跳过，因为它们不会从第二桥接层中受益。如果生成，第二桥接层" +"将与第一桥接层平行挤出，以增强桥接强度\n" +"3. 仅内部桥接 - 仅为稀疏填充上的内部桥接生成第二桥接层。请注意，内部桥接计入" +"模型的顶部外壳层数。第二内部桥接层将尽可能垂直于第一层挤出。如果在同一岛屿中" +"存在多个具有不同桥接角度的区域，则该岛屿的最后一个区域将被选为角度参考\n" +"4. 全部应用 - 为内部和面向外部的桥接生成第二桥接层\n" msgid "Disabled" msgstr "禁用" +msgid "External bridge only" +msgstr "仅外部桥接" + +msgid "Internal bridge only" +msgstr "仅内部桥接" + +msgid "Apply to all" +msgstr "全部应用" + +msgid "Filter out small internal bridges" +msgstr "过滤掉小的内部桥接" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" +msgstr "" +"此选项可以帮助减少严重倾斜或弯曲模型顶面的枕化效应。\n" +"默认情况下，小的内部桥接被过滤掉，内部实心填充直接打印在稀疏填充上。这在大多" +"数情况下效果良好，可以加快打印速度而不会过分影响顶面质量。\n" +"然而，在严重倾斜或弯曲的模型中，特别是当使用的稀疏填充密度过低时，这可能导致" +"未支撑的实心填充翘曲，引起枕化效应。\n" +"启用有限过滤或不过滤将在轻微未支撑的内部实心填充上打印内部桥接层。以下选项控" +"制过滤的灵敏度，即它们控制在哪里创建内部桥接：\n" +"1. 过滤 - 启用此选项。这是默认行为，在大多数情况下效果良好\n" +"2. 有限过滤 - 在严重倾斜的表面上创建内部桥接，同时避免不必要的桥接。这对大多" +"数困难的模型效果良好\n" +"3. 不过滤 - 在每个潜在的内部悬垂上创建内部桥接。此选项对严重倾斜的顶面模型有" +"用；但是，在大多数情况下，它会创建太多不必要的桥接" + msgid "Limited filtering" msgstr "有限保留" @@ -9842,18 +11784,18 @@ msgstr "" msgid "End G-code" msgstr "结尾G-code" -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "所有打印结束时的结尾G-code" -msgid "Between Object Gcode" +msgid "Between Object G-code" msgstr "对象之间Gcode" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" -msgstr "在对象之间插入 Gcode。此参数仅在逐个打印模型物体时生效。" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." +msgstr "在对象之间插入 G-code。此参数仅在逐个打印模型物体时生效。" -msgid "End G-code when finish the printing of this filament" +msgid "End G-code when finishing the printing of this filament." msgstr "结束使用该耗材打印时的结尾G-code" msgid "Ensure vertical shell thickness" @@ -9886,24 +11828,24 @@ msgstr "适量" msgid "Top surface pattern" msgstr "顶面图案" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "顶面填充的走线图案" -msgid "Concentric" -msgstr "同心" - -msgid "Rectilinear" -msgstr "直线" - msgid "Monotonic" msgstr "单调" msgid "Monotonic line" msgstr "单调线" +msgid "Rectilinear" +msgstr "直线" + msgid "Aligned Rectilinear" msgstr "直线排列" +msgid "Concentric" +msgstr "同心" + msgid "Hilbert Curve" msgstr "希尔伯特曲线" @@ -9916,7 +11858,7 @@ msgstr "八角螺旋" msgid "Bottom surface pattern" msgstr "底面图案" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "除了桥接外的底面填充的走线图案" msgid "Internal solid infill pattern" @@ -9956,17 +11898,18 @@ msgid "Small perimeters threshold" msgstr "微小部位周长阈值" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "这将设置微小部位周长的阈值。默认阈值为0mm" msgid "Walls printing order" msgstr "墙顺序" +#, fuzzy msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -9976,15 +11919,13 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" "内墙和外墙的打印顺序。\n" "\n" @@ -9997,9 +11938,7 @@ msgstr "" "数情况下，此选项建议使用而不是外/内选项。\n" "\n" "使用外/内以获得与内/外/内选项相同的外部墙质量和尺寸精度优势。但是，由于新层的" -"第一次挤出是在可见表面上开始的，因此z缝隙看起来不那么一致。\n" -"\n" -" " +"第一次挤出是在可见表面上开始的，因此z缝隙看起来不那么一致。" msgid "Inner/Outer" msgstr "内墙/外墙" @@ -10018,7 +11957,7 @@ msgid "" "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." @@ -10037,17 +11976,17 @@ msgid "" "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" -"从顶部往下看时,墙壁被打印的方向。\n" +"从上往下看时墙循环挤出的方向。\n" "\n" -"默认情况下,所有墙壁都按逆时针方向被打印,除非启用了奇数层翻转选项。将此选项设" -"置为除自动之外的任何选项,都会强制指定墙壁方向,而不受奇数层翻转选项的影响。\n" +"默认情况下，所有墙都以逆时针方向挤出，除非启用了偶数层反转。将此设置为自动以" +"外的任何选项将强制墙方向，而不管偶数层反转如何。\n" "\n" -"如果启用了螺旋花瓶模式,此选项将被禁用。" +"如果启用螺旋花瓶模式，此选项将被禁用。" msgid "Counter clockwise" msgstr "逆时针" @@ -10138,10 +12077,13 @@ msgid "" "mesh area should be expanded in the XY directions." msgstr "此选项决定了自适应网床网格区域在XY方向上应扩展的额外距离。" +msgid "Grab length" +msgstr "" + msgid "Extruder Color" msgstr "挤出机颜色" -msgid "Only used as a visual help on UI" +msgid "Only used as a visual help on UI." msgstr "只作为界面上的可视化辅助" msgid "Extruder offset" @@ -10151,27 +12093,123 @@ msgid "Flow ratio" msgstr "流量比例" msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "材料经过融化后凝固可能会产生体积差异。这个设置会等比例改变所有挤出走线的挤出" "量。推荐的范围为0.95到1.05。发现大平层模型的顶面有轻微的缺料或多料时，或许可" "以尝试微调这个参数。" +msgid "" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"材料在熔融和结晶状态之间切换后可能会发生体积变化。此设置会等比例改变此耗材在" +"G-code中的所有挤出流量。推荐值范围在0.95到1.05之间。如果存在轻微的溢出或欠" +"流，您可以调整此值以获得平整的表面。\n" +"\n" +"最终的对象流量比率是此值乘以耗材流量比率。" + msgid "Enable pressure advance" msgstr "启用压力提前" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." msgstr "启用压力提前，一旦启用会覆盖自动检测的结果" -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "压力提前(Klipper)或者线性提前(Marlin)" +msgid "Enable adaptive pressure advance (beta)" +msgstr "启用自适应压力提前（试验）" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "自适应压力提前参数（试验）" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "为悬垂启用自适应压力提前（试验）" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" + +msgid "Pressure advance for bridges" +msgstr "为搭桥启用压力提前" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" + msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." @@ -10181,8 +12219,9 @@ msgid "Keep fan always on" msgstr "保持风扇常开" msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" "如果勾选这个选项，部件冷却风扇将永远不会停止，并且会至少运行在最小风扇转速值" "以减少风扇的启停频次" @@ -10194,21 +12233,17 @@ msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" "如果启用，此设置将确保外墙不会为了满足最小层时间而减速。这在以下情况下特别有" "帮助：\n" -"\n" "1. 避免在打印光滑耗材时改变光泽\n" "2. 避免改变外墙速度，可能会产生轻微的墙壁伪影，看起来像z条纹\n" -"3. 避免以会在外墙上产生VFAs（细微伪影）的速度打印\n" -"\n" +"3. 避免以会在外墙上产生VFAs（细微伪影）的速度打印" msgid "Layer time" msgstr "层时间" @@ -10216,7 +12251,7 @@ msgstr "层时间" msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" "当层预估打印时间小于该数值时，部件冷却风扇将会被开启。风扇转速将根据层打印时" "间在最大和最小风扇转速之间插值获得" @@ -10224,8 +12259,12 @@ msgstr "" msgid "Default color" msgstr "缺省颜色" -msgid "Default filament color" -msgstr "缺省材料颜色" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" +"默认耗材颜色。\n" +"右键单击以将值重置为系统默认值。" msgid "Filament notes" msgstr "耗材注释" @@ -10241,39 +12280,103 @@ msgid "" "of nozzle's HRC." msgstr "打印此材料的所需的最小喷嘴硬度。零值表示不检查喷嘴硬度。" +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" "这个设置表示在1秒内能够融化和挤出的耗材丝体积。打印速度会受到最大体积速度的限" "制，防止设置过高和不合理的速度。不允许设置为0。" -msgid "mm³/s" -msgstr "mm³/s" - msgid "Filament load time" msgstr "加载耗材丝的时间" -msgid "Time to load new filament when switch filament. For statistics only" -msgstr "切换耗材丝时，加载新耗材丝所需的时间。只用于统计信息。" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"换料时加载新耗材所需的时间。通常适用于单挤出机多材料机器。对于换工具器或多工" +"具机器，此值通常为0。仅用于统计。" msgid "Filament unload time" msgstr "卸载耗材丝的时间" -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "切换耗材丝时，卸载旧的耗材丝所需时间。只用于统计信息。" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"换料时卸载旧耗材所需的时间。通常适用于单挤出机多材料机器。对于换工具器或多工" +"具机器，此值通常为0。仅用于统计。" + +msgid "Tool change time" +msgstr "换工具头所需时间" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" -msgstr "耗材丝直径被用于计算G-code文件中的挤出量。因此很重要，应尽可能精确。" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"换工具所需的时间。通常适用于换工具器或多工具机器。对于单挤出机多材料机器，此" +"值通常为0。仅用于统计。" -msgid "Pellet flow coefficient" +msgid "Bed temperature type" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "耗材丝直径被用于计算G-code文件中的挤出量。因此很重要，应尽可能精确。" + +msgid "Pellet flow coefficient" +msgstr "颗粒流动系数" + +msgid "" +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10282,13 +12385,25 @@ msgid "" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -msgid "Shrinkage" -msgstr "耗材收缩率" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "收缩率（XY）" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -10298,6 +12413,25 @@ msgstr "" "补偿将按比例缩放xy轴该补偿仅考虑墙壁所使用的耗材\n" "请确保物体之间有足够的间距，因为补偿是在边界检查之后进行" +msgid "Shrinkage (Z)" +msgstr "收缩率（Z）" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"冷却后耗材会收缩的百分比(如果测量的长度是94mm而不是100mm，则为是收缩率为" +"94%)\n" +"补偿将按比例缩放Z轴" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" + msgid "Loading speed" msgstr "加载速度" @@ -10314,7 +12448,7 @@ msgid "Unloading speed" msgstr "卸载速度" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "用于擦拭塔卸载耗材的速度（不影响尖端成型之后初始部分的速度）。" @@ -10329,8 +12463,8 @@ msgid "Delay after unloading" msgstr "卸载后延迟" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "耗材丝卸载后等待的时间。有助于柔性材料（收缩到原始尺寸需更多的时间）以获得可" @@ -10344,6 +12478,23 @@ msgid "" "Specify desired number of these moves." msgstr "耗材丝通过在喉管中来回移动来冷却。指定所需的移动次数。" +msgid "Stamping loading speed" +msgstr "尖端成型加载速度" + +msgid "Speed used for stamping." +msgstr "用于尖端成型的速度" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "从冷却管中心测量的尖端成型距离" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"如果设置为非零值，则在各个冷却移动之间耗材会向喷嘴方向移动（“印模”）。该选项" +"用于配置耗材在重新回抽前应移动多长时间。" + msgid "Speed of the first cooling move" msgstr "第一次冷却移动的速度" @@ -10370,14 +12521,6 @@ msgstr "最后一次冷却移动的速度" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "冷却移动向这个速度逐渐加速。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"在换色时（执行T代码，如T1，T2），打印机固件（或Multi Material Unit 2.0）加载" -"新耗材的所需时间。该时间将会被G-code时间评估功能加到总打印时间上去。" - msgid "Ramming parameters" msgstr "尖端成型参数" @@ -10386,71 +12529,74 @@ msgid "" "parameters." msgstr "此内容由尖端成型窗口编辑，包含尖端成型的特定参数。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"换色期间（执行T代码时如T1，T2），打印机固件（或MMU2.0）卸载耗材所需时间。该时" -"间将会被G-code时间评估功能加到总打印时间上去。" - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "启用多色尖端成型设置" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "多色打印机执行尖端成型时（即，当打印机设置中的单挤出机多材料未选中时）。选中" "时，在换色之前，会迅速挤出少量耗材丝到擦拭塔上。此选项仅在启用擦拭塔时使用。" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "多色尖端成型体积" -msgid "The volume to be rammed before the toolchange." +msgid "The volume to be rammed before the tool change." msgstr "换色前尖端成型的体积" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "多色尖端成型流量" -msgid "Flow used for ramming the filament before the toolchange." +msgid "Flow used for ramming the filament before the tool change." msgstr "换色前耗材尖端成型的流量" msgid "Density" msgstr "密度" -msgid "Filament density. For statistics only" +msgid "Filament density. For statistics only." msgstr "耗材丝的密度。只用于统计信息。" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "耗材丝的材料类型" msgid "Soluble material" msgstr "可溶性材料" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "可溶性材料通常用于打印支撑和支撑面" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "支撑材料" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "支撑材料通常用于打印支撑体和支撑接触面" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "软化温度" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "材料在这个温度下会软化，因此当热床温度等于或高于这个温度时，强烈建议打开前门" "和/或去除上玻璃以避免堵塞。" @@ -10458,7 +12604,7 @@ msgstr "" msgid "Price" msgstr "价格" -msgid "Filament price. For statistics only" +msgid "Filament price. For statistics only." msgstr "耗材丝的价格。只用于统计信息。" msgid "money/kg" @@ -10467,7 +12613,7 @@ msgstr "money/kg" msgid "Vendor" msgstr "供应商" -msgid "Vendor of filament. For show only" +msgid "Vendor of filament. For show only." msgstr "打印耗材的供应商。仅用于展示。" msgid "(Undefined)" @@ -10478,7 +12624,7 @@ msgstr "稀疏填充方向" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "稀疏填充图案的角度，决定走线的开始或整体方向。" msgid "Solid infill direction" @@ -10486,53 +12632,83 @@ msgstr "实心填充方向" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" +"of line." msgstr "实心填充图案的角度，决定走线的开始或整体方向。" -msgid "Rotate solid infill direction" -msgstr "旋转实心填充方向" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "每层都旋转实心填充方向90°。" - msgid "Sparse infill density" msgstr "稀疏填充密度" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." msgstr "" +"内部稀疏填充的密度，100%会将所有稀疏填充变为实心填充，并将使用内部实心填充图" +"案。" + +msgid "Align infill direction to model" +msgstr "对齐填充方向到模型" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" +"使填充和表面填充方向遵循模型在打印板上的方向。启用时，填充方向随模型旋转以保" +"持最佳强度特性。" + +msgid "Insert solid layers" +msgstr "插入实心层" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" +"在特定层插入实心填充。使用N表示每N层插入一次，N#K表示每N层插入K个连续的实心层" +"（K是可选的，例如'5#'等于'5#1'），或使用逗号分隔的列表（例如1,7,9）在指定层插" +"入。层数从1开始。" + +msgid "Fill Multiline" +msgstr "填充多线" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." +msgstr "如果填充图案支持，使用多线进行填充。" msgid "Sparse infill pattern" msgstr "稀疏填充图案" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "内部稀疏填充的走线图案" -msgid "Grid" -msgstr "网格" +msgid "Zig Zag" +msgstr "之字形" + +msgid "Cross Zag" +msgstr "交叉之字" + +msgid "Locked Zag" +msgstr "限定之字" msgid "Line" msgstr "线" -msgid "Cubic" -msgstr "立方体" +msgid "Grid" +msgstr "网格" msgid "Tri-hexagon" msgstr "内六边形" -msgid "Gyroid" -msgstr "螺旋体" - -msgid "Honeycomb" -msgstr "蜂窝" +msgid "Cubic" +msgstr "立方体" msgid "Adaptive Cubic" msgstr "自适应立方体" -msgid "3D Honeycomb" -msgstr "3D 蜂窝" +msgid "Quarter Cubic" +msgstr "四分之一立方体" msgid "Support Cubic" msgstr "支撑立方体" @@ -10540,9 +12716,53 @@ msgstr "支撑立方体" msgid "Lightning" msgstr "闪电" +msgid "Honeycomb" +msgstr "蜂窝" + +msgid "3D Honeycomb" +msgstr "3D 蜂窝" + +msgid "Lateral Honeycomb" +msgstr "侧向蜂窝" + +msgid "Lateral Lattice" +msgstr "侧向向晶格" + msgid "Cross Hatch" msgstr "交叉层叠" +msgid "TPMS-D" +msgstr "TPMS-D结构" + +msgid "TPMS-FK" +msgstr "TPMS-FK结构" + +msgid "Gyroid" +msgstr "螺旋体" + +msgid "Lateral lattice angle 1" +msgstr "侧向晶格角度1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "第一组二维晶格单元在Z方向的角度。零表示垂直。" + +msgid "Lateral lattice angle 2" +msgstr "侧向晶格角度2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "第二组二维晶格单元在Z方向的角度。零表示垂直。" + +msgid "Infill overhang angle" +msgstr "填充悬空角度" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." +msgstr "填充倾斜线的角度。60°将产生纯蜂窝结构。" + msgid "Sparse infill anchor length" msgstr "稀疏填充锚线长度" @@ -10554,7 +12774,7 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" @@ -10581,7 +12801,7 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" @@ -10593,21 +12813,21 @@ msgstr "" msgid "0 (Simple connect)" msgstr "0（简单连接）" -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "外墙的加速度。它通常使用比内壁速度慢的加速度，以获得更好的质量" -msgid "Acceleration of inner walls" +msgid "Acceleration of inner walls." msgstr "内圈墙加速度，使用较低值可以改善质量。" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "空驶加速度" msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "顶面填充的加速度。使用较低值可能会改善顶面质量" -msgid "Acceleration of outer wall. Using a lower value can improve quality" +msgid "Acceleration of outer wall. Using a lower value can improve quality." msgstr "外墙加速度。使用较小的值可以提高质量。" msgid "" @@ -10636,13 +12856,13 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" +"adhesion." msgstr "首层加速度。使用较低值可以改善和构建板的粘接。" msgid "Enable accel_to_decel" msgstr "启用制动速度" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper的max_accel_to_decel将被自动调整" msgid "accel_to_decel" @@ -10650,25 +12870,36 @@ msgstr "制动速度" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper的max_accel_to_decel将被调整为该加速度的百分比" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "默认抖动" + +msgid "Junction Deviation" +msgstr "结点偏差" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "外墙抖动值" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "内墙抖动值" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "顶面抖动值" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "填充抖动" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "首层抖动值" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "空驶抖动值" msgid "" @@ -10681,22 +12912,22 @@ msgstr "首层层高" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "首层层高" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "首层除实心填充之外的其他部分的打印速度" msgid "Initial layer infill" msgstr "首层填充" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "首层实心填充的打印速度" msgid "Initial layer travel speed" msgstr "首层空驶速度" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "首层空驶速度" msgid "Number of slow layers" @@ -10710,7 +12941,7 @@ msgstr "减慢前几层的打印速度。打印速度会逐渐加速到满速" msgid "Initial layer nozzle temperature" msgstr "首层打印温度" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "打印首层时的喷嘴温度" msgid "Full fan speed at layer" @@ -10728,21 +12959,53 @@ msgstr "" "层”+1层以最大允许速度运行。" msgid "layer" -msgstr "" +msgstr "层" msgid "Support interface fan speed" msgstr "支撐接触面风扇" msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "此风扇速度在所有支撑接触层打印期间强制执行" +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"在打印支撑接触面时使用此部件冷却风扇的转速。将此参数设置为高于正常速度可以降" +"低支撑与被支撑零件之间的层粘结强度，使它们更易分离。\n" +"设置为 -1 表示禁用该功能。\n" +"该设置会被 disable_fan_first_layers 选项覆盖。" + +msgid "Internal bridges fan speed" +msgstr "内部桥接风扇速度" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"用于所有内部桥接的部件冷却风扇转速。设置为 -1 时，将采用悬垂风扇转速设置。\n" +"\n" +"与常规风扇转速相比，降低内部桥接风扇转速可以帮助减少因长时间在大面积区域施加" +"过度冷却而引起的零件变形。" + +msgid "Ironing fan speed" +msgstr "熨烫风扇速度" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." +msgstr "" msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" +"look. This setting controls the fuzzy position." msgstr "打印外墙时随机抖动，使外表面产生绒效果。这个设置决定适用的位置。" msgid "Contour" @@ -10758,43 +13021,141 @@ msgid "Fuzzy skin thickness" msgstr "绒毛表面厚度" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" +"The width within which to jitter. It's advised to be below outer wall line " +"width." msgstr "产生绒毛的抖动的宽度。建议小于外圈墙的线宽。" msgid "Fuzzy skin point distance" msgstr "绒毛表面点间距" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "产生绒毛表面时，插入的随机点之间的平均距离" msgid "Apply fuzzy skin to first layer" msgstr "绒毛表面应用至首层" -msgid "Whether to apply fuzzy skin on the first layer" +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "是否在第一层应用绒毛效果" + +msgid "Fuzzy skin generator mode" +msgstr "绒毛表面生成器模式" + +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." msgstr "" +msgid "Displacement" +msgstr "位移" + +msgid "Extrusion" +msgstr "挤出" + +msgid "Combined" +msgstr "合并" + +msgid "Fuzzy skin noise type" +msgstr "绒毛噪声类型" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"用于生成绒毛效果的噪声类型。\n" +"经典: 经典的均匀随机噪声。\n" +"柏林噪声: 能产生更均匀纹理的柏林噪声。\n" +"云状噪声: 类似柏林噪声，但更聚集。\n" +"脊状多重分形: 具有锋利锯齿特性的脊状噪声，呈现大理石般纹理。\n" +"维诺图: 将表面划分为维诺单元，每个单元依随机量位移，形成拼贴纹理。" + +msgid "Classic" +msgstr "经典" + +msgid "Perlin" +msgstr "柏林噪声" + +msgid "Billow" +msgstr "云状噪声" + +msgid "Ridged Multifractal" +msgstr "脊状多重分形" + +msgid "Voronoi" +msgstr "维诺图" + +msgid "Fuzzy skin feature size" +msgstr "绒毛表面特征尺寸" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "相干噪声特征的基础尺寸（单位：毫米）。较高的数值会产生更大的特征。" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "绒毛噪声倍频" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "使用的相干噪声倍频数。较高的数值会增加噪声细节，但也会增加计算时间。" + +msgid "Fuzzy skin noise persistence" +msgstr "绒毛噪声持续性" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "相干噪声高倍频的衰减速率。较低的数值会产生更平滑的噪声。" + msgid "Filter out tiny gaps" msgstr "忽略微小间隙" msgid "Layers and Perimeters" msgstr "层和墙" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "忽略小于指定阈值的间隙" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" +"printed more slowly." msgstr "填缝的速度。缝隙通常有不一致的线宽，应改用较慢速度打印。" msgid "Precise Z height" msgstr "精准Z高度" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" @@ -10806,9 +13167,9 @@ msgstr "圆弧拟合" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " @@ -10824,7 +13185,8 @@ msgstr "" msgid "Add line number" msgstr "标注行号" -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "启用该设置，G-code的每一行的开头会增加Nx标注行号。" msgid "Scan first layer" @@ -10832,7 +13194,7 @@ msgstr "首层扫描" msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" +"layer." msgstr "开启这个设置将打开打印机上的摄像头用于检查首层打印质量。" msgid "Nozzle type" @@ -10840,7 +13202,7 @@ msgstr "喷嘴类型" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "喷嘴的金属材料。这将决定喷嘴的耐磨性，以及可打印材料的种类" msgid "Undefine" @@ -10852,6 +13214,9 @@ msgstr "硬化钢" msgid "Stainless steel" msgstr "不锈钢" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "黄铜" @@ -10869,7 +13234,7 @@ msgstr "洛氏硬度" msgid "Printer structure" msgstr "打印机结构" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "打印设备的物理结构和组件" msgid "CoreXY" @@ -10900,14 +13265,12 @@ msgid "" "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"把风扇启动指令往前移动指定时间以补偿风扇的启动时间。目前支支持G1 G0指令\n" -"设为0以禁用此选项" msgid "Only overhangs" msgstr "仅悬垂" @@ -10931,7 +13294,7 @@ msgstr "" msgid "Time cost" msgstr "时间花费" -msgid "The printer cost per hour" +msgid "The printer cost per hour." msgstr "打印机每小时的成本" msgid "money/h" @@ -10958,29 +13321,29 @@ msgstr "" msgid "G-code flavor" msgstr "G-code风格" -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "打印机兼容的G-code风格'" msgid "Klipper" -msgstr "" +msgstr "Klipper固件" msgid "Pellet Modded Printer" -msgstr "" +msgstr "颗粒改装打印机" -msgid "Enable this option if your printer uses pellets instead of filaments" -msgstr "" +msgid "Enable this option if your printer uses pellets instead of filaments." +msgstr "如果您的打印机使用颗粒而不是耗材丝，请启用此选项" msgid "Support multi bed types" msgstr "支持多种打印床类型" -msgid "Enable this option if you want to use multiple bed types" +msgid "Enable this option if you want to use multiple bed types." msgstr "如果要使用多种打印床类型，请启用此选项" msgid "Label objects" msgstr "标注模型" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -10992,8 +13355,8 @@ msgstr "" msgid "Exclude objects" msgstr "对象排除" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "开启此选项以支持对象排除" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." +msgstr "启用此选项以在G-code中添加EXCLUDE OBJECT命令。" msgid "Verbose G-code" msgstr "注释G-code" @@ -11015,6 +13378,128 @@ msgid "" msgstr "" "自动合并若干层稀疏填充一起打印以可缩短时间。内外墙依然保持原始层高打印。" +msgid "Infill shift step" +msgstr "填充偏移步长" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "稀疏填充旋转模板" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "实心填充旋转模板" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "骨架填充密度" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "外壳填充密度" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "外壳填充深度" + +msgid "The parameter sets the depth of skin." +msgstr "该参数设置外壳深度" + +msgid "Infill lock depth" +msgstr "填充锁定深度" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "该参数设置内部与外壳之间的重叠深度" + +msgid "Skin line width" +msgstr "外壳线宽" + +msgid "Adjust the line width of the selected skin paths." +msgstr "调整选中外壳路径的线宽" + +msgid "Skeleton line width" +msgstr "骨架线宽" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "调整选中骨架路径的线宽" + +msgid "Symmetric infill Y axis" +msgstr "对称填充Y轴" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "填充组合 - 最大层高" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" + msgid "Filament to print internal sparse infill." msgstr "打印内部稀疏填充的耗材丝" @@ -11033,6 +13518,9 @@ msgid "" "value to ~10-15% to minimize potential over extrusion and accumulation of " "material resulting in rough top surfaces." msgstr "" +"填充区域略微扩大以与墙壁重叠，以获得更好的粘合。百分比值相对于稀疏填充的线" +"宽。将此值设置为约10-15%，以最小化潜在的过挤出和材料积累，从而导致顶部表面粗" +"糙。" msgid "Top/Bottom solid infill/wall overlap" msgstr "顶/底部实心填充/墙重叠率" @@ -11041,24 +13529,30 @@ msgstr "顶/底部实心填充/墙重叠率" msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" "顶部实心填充区域略微扩大，以便与墙壁重叠，以获得更好的粘合，并减少顶部填充与" "墙壁相接处的小孔出现。25-30%的值是一个很好的起点，可以减少小孔的出现。百分比" "值相对于稀疏填充的线宽" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "内部稀疏填充的打印速度" +msgid "Inherits profile" +msgstr "继承配置文件" + +msgid "Name of parent profile." +msgstr "父配置名称" + msgid "Interface shells" msgstr "接触面外壳" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "强制在相邻材料/体积之间生成实心壳。适用于使用半透明材料或手动可溶性支撑材料的" "多挤出机打印" @@ -11072,8 +13566,15 @@ msgstr "分段区域的最大宽度。将其设置为零会禁用此功能。" msgid "Interlocking depth of a segmented region" msgstr "分割区域的交错深度" -msgid "Interlocking depth of a segmented region. Zero disables this feature." -msgstr "分割区域的交错深度。0 则禁用此功能。" +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." +msgstr "" +"分割区域的交错深度。如果\"mmu_segmented_region_max_width\"为零或" +"\"mmu_segmented_region_interlocking_depth\"大于" +"\"mmu_segmented_region_max_width\"，则将被忽略。零将禁用此功能。" msgid "Use beam interlocking" msgstr "启用互锁梁" @@ -11083,6 +13584,8 @@ msgid "" "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"在不同耗材接触的位置生成互锁梁结构。这改善了耗材之间的粘合性，特别是使用不同" +"材料打印的模型。" msgid "Interlocking beam width" msgstr "互锁梁宽度" @@ -11102,15 +13605,16 @@ msgstr "互锁梁层数" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." -msgstr "" +msgstr "互锁结构梁的高度，以层数为单位。较少的层更强，但更容易出现缺陷。" msgid "Interlocking depth" -msgstr "" +msgstr "互锁深度" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"从耗材边界生成互锁结构的距离，以单元格为单位。太少的单元格将导致粘合不良。" msgid "Interlocking boundary avoidance" msgstr "互锁与边界的留白量" @@ -11145,7 +13649,7 @@ msgstr "所有实心层" msgid "Ironing Pattern" msgstr "熨烫模式" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "熨烫时将使用的图案" msgid "Ironing flow" @@ -11153,38 +13657,53 @@ msgstr "熨烫流量" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" +"layer height. Too high value results in overextrusion on the surface." msgstr "熨烫时相对正常层高流量的材料量。过高的数值将会导致表面材料过挤出。" msgid "Ironing line spacing" msgstr "熨烫间距" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "熨烫走线的间距" +msgid "Ironing inset" +msgstr "熨烫内缩" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "与边缘保持的距离。0值将其设置为喷嘴直径的一半。" + msgid "Ironing speed" msgstr "熨烫速度" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "熨烫的打印速度" -msgid "Ironing angle" -msgstr "熨烫角度" +msgid "Ironing angle offset" +msgstr "" -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." -msgstr "熨烫的角度。设为负值将禁用此功能并使用默认方法。" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." msgstr "在每次换层抬升Z高度之后插入这段G-code。" +msgid "Clumping detection G-code" +msgstr "" + msgid "Supports silent mode" msgstr "支持静音模式" msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" +"acceleration to print." msgstr "机器是否支持使用低加速度打印的静音模式。" msgid "Emit limits to G-code" @@ -11195,23 +13714,23 @@ msgstr "机器限制" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "如果启用，机器限制将写入到G-code文件。\n" "如果G-code风格设置为Klipper，则此选项将被忽略。" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." msgstr "该G-code用于暂停打印。您可以在gcode预览中插入暂停G-code" -msgid "This G-code will be used as a custom code" +msgid "This G-code will be used as a custom code." msgstr "该G-code是定制化指令" msgid "Small area flow compensation (beta)" msgstr "小区域填充流量补偿（试验）" -msgid "Enable flow compensation for small infill areas" +msgid "Enable flow compensation for small infill areas." msgstr "启用小区域填充的流量补偿" msgid "Flow Compensation Model" @@ -11220,11 +13739,11 @@ msgstr "流量补偿模型" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" -"流量补偿模型，用于调整小区域填充的流量。模型以逗号分隔的形式表示，每行一个" -"值，格式如下：\"1.234,5.678\"" +"流量补偿模型，用于调整小填充区域的流量。该模型表示为挤出长度和流量校正因子的" +"逗号分隔值对。每对位于单独的行上，后跟分号，格式如下：\"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "X最大速度" @@ -11298,6 +13817,15 @@ msgstr "Z轴最大抖动" msgid "Maximum jerk of the E axis" msgstr "E轴最大抖动" +msgid "Maximum Junction Deviation" +msgstr "最大结点偏差" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" + msgid "Minimum speed for extruding" msgstr "最小挤出速度" @@ -11325,22 +13853,40 @@ msgstr "回抽最大加速度(M204 R)" msgid "Maximum acceleration for travel" msgstr "空驶最大加速度" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "最大空驶加速度（M204 T），仅适用于Marlin 2" +msgid "Resonance avoidance" +msgstr "共振规避" + msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." msgstr "" -"启用自动冷却时，可能会提高部件冷却风扇的转速。这是部件冷却风扇的最大速度限制" + +msgid "Min" +msgstr "最小" + +msgid "Minimum speed of resonance avoidance." +msgstr "共振规避的最小速度" msgid "Max" msgstr "最大" +msgid "Maximum speed of resonance avoidance." +msgstr "共振规避的最大速度" + msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" -msgstr "挤出头最大可打印的层高。用于限制开启自适应层高时的最大层高。" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"启用自动冷却时，可能会提高部件冷却风扇的转速。这是部件冷却风扇的最大速度限制" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." +msgstr "" msgid "Extrusion rate smoothing" msgstr "平滑挤出率" @@ -11351,23 +13897,23 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" @@ -11375,41 +13921,48 @@ msgid "" msgstr "" "此参数是打印机从打印高流量挤出（高速/较大宽度）向低流量挤出（低速/较小宽度）" "时用于突然变化挤出速率的平滑，反之亦然。\n" -"它定义了挤出体积流量（mm3/s）随时间变化的最大速率。更高的值意味着允许更高的挤" +"它定义了挤出体积流量（mm³/s）随时间变化的最大速率。更高的值意味着允许更高的挤" "出速率变化，从而产生更快速的过渡。\n" "\n" "值为0将禁用该功能。\n" "\n" "对于高速、高流量的近程挤出机（如Bambu或Voron）通常不需要该值。但是，在特征速" "度变化很大的某些情况下，它可以提供一些边际收益。例如，当由于悬垂而出现严重的" -"减速时。在这些情况下，建议使用一个大的值大约300-350 m3/s2的，因为这刚好允许足" -"够的平滑，以帮助压力提前实现更平滑的流量过渡。\n" +"减速时。在这些情况下，建议使用一个大的值大约300-350 mm³/s²的，因为这刚好允许" +"足够的平滑，以帮助压力提前实现更平滑的流量过渡。\n" "\n" "对于没有压力提前的较慢打印机，该值应该设置得非常低。对于近程挤出机来说10-15 " -"mm3/s2是一个很好值的起点，而对于远程挤出机来说是5-10 mm3/s2。\n" +"mm³/s²是一个很好值的起点，而对于远程挤出机来说是5-10 mm³/s²。\n" "\n" "这个功能在Prusa切片机中被称为压力均衡器。\n" "\n" "注意：此参数禁用圆弧拟合。" -msgid "mm³/s²" -msgstr "mm³/s²" - msgid "Smoothing segment length" msgstr "平滑段长度" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" -msgid "Minimum speed for part cooling fan" +msgid "Apply only on external features" +msgstr "仅应用于外部特征" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" + +msgid "Minimum speed for part cooling fan." msgstr "部件冷却风扇的最小转速" msgid "" @@ -11423,28 +13976,21 @@ msgstr "" "却的前若干层\n" "请在打印机设置中启用辅助风扇以使用此功能。G-code指令：M106 P2 S(0-255)" -msgid "Min" -msgstr "最小" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" -msgstr "挤出头最小可打印的层高。用于限制开启自适应层高时的最小层高。" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." +msgstr "" msgid "Min print speed" msgstr "最小打印速度" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." -msgstr "在您启用“降低打印速度 " -"以得到更好的冷却”选项时最小的打印速度，以尝试保持上方设置的最小层时间。" +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." +msgstr "" -msgid "Nozzle diameter" -msgstr "喷嘴直径" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "喷嘴直径" msgid "Configuration notes" @@ -11466,7 +14012,7 @@ msgstr "Snapmaker Orca可以将G-code文件上传到打印机主机。此字段 msgid "Nozzle volume" msgstr "喷嘴内腔体积" -msgid "Volume of nozzle between the cutter and the end of nozzle" +msgid "Volume of nozzle between the cutter and the end of nozzle." msgstr "从切刀位置到喷嘴尖端的内腔体积" msgid "Cooling tube position" @@ -11507,7 +14053,7 @@ msgstr "额外加载距离" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "当设置为零时，耗材的加载移动与卸载移动的距离相同。如果为正，加载比卸载长。如" @@ -11525,15 +14071,20 @@ msgstr "减小填充回抽" msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "当空驶完全在填充区域内时不触发回抽。这意味着即使漏料也是不可见的。对于复杂模" "型，该设置能够减少回抽次数以及打印时长，但是会造成G-code生成变慢" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "此选项将降低非活动挤出机的温度，以防止渗出。" + msgid "Filename format" msgstr "文件名格式" -msgid "User can self-define the project file name when export" +msgid "Users can define the project file name when exporting." msgstr "用户可以自定义导出项目文件的名称。" msgid "Make overhangs printable" @@ -11558,14 +14109,11 @@ msgstr "最大孔洞面积" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "模型底部的孔洞在被圆锥形材料填充前所允许的最大面积。值为0将填充模型底部的所有" "孔洞。" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" msgstr "识别悬空外墙" @@ -11576,15 +14124,18 @@ msgid "" msgstr "" "检测悬空相对于线宽的百分比，并应用不同的速度打印。100%%的悬空将使用桥接速度。" +msgid "Filament to print walls." +msgstr "打印外墙的耗材丝" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "内墙的线宽。如果以%表示，它将基于喷嘴直径来计算。" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "内圈墙打印速度" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "每一层的外墙" msgid "Alternate extra wall" @@ -11592,10 +14143,10 @@ msgstr "交替添加额外内墙" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." @@ -11615,10 +14166,15 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" -"如果您希望使用自定义脚本来处理输出的 " -"G-code，只需要在此列出这些脚本的绝对路径，使用分号来分割多个脚本。" -"脚本执行的第一个参数将会被设置为 G-code 文件的绝对路径，" -"并支持脚本通过全局变量来读取 Snapmaker Orca 的设置。" +"如果您希望使用自定义脚本来处理输出的 G-code，只需要在此列出这些脚本的绝对路" +"径，使用分号来分割多个脚本。脚本执行的第一个参数将会被设置为 G-code 文件的绝" +"对路径，并支持脚本通过全局变量来读取 Snapmaker Orca 的设置。" + +msgid "Printer type" +msgstr "打印机类型" + +msgid "Type of the printer." +msgstr "打印机类型" msgid "Printer notes" msgstr "打印机注释" @@ -11626,28 +14182,31 @@ msgstr "打印机注释" msgid "You can put your notes regarding the printer here." msgstr "你可以把你关于打印机的注释放在这里。" +msgid "Printer variant" +msgstr "打印机变种" + msgid "Raft contact Z distance" msgstr "筏层Z间距" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "模型和筏层之间的Z间隙" msgid "Raft expansion" msgstr "筏层扩展" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "在XY平面扩展所有筏层" msgid "Initial layer density" msgstr "首层密度" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "筏和支撑的首层密度" msgid "Initial layer expansion" msgstr "首层扩展" -msgid "Expand the first raft or support layer to improve bed plate adhesion" +msgid "Expand the first raft or support layer to improve bed plate adhesion." msgstr "扩展筏和支撑的首层可以改善和热床的粘接。" msgid "Raft layers" @@ -11655,14 +14214,14 @@ msgstr "筏层" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" "模型会在相应层数的支撑上抬高进行打印。使用该功能通常用于打印ABS时翘曲。" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "为了避免G-code文件中过密集的点和走线，G-code走线通常是在简化模型的外轮廓之后" "生成。越小的数值代表更高的分辨率，同时需要更长的切片时间。" @@ -11672,20 +14231,20 @@ msgstr "空驶距离阈值" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" +"threshold." msgstr "只在空驶距离大于该数值时触发回抽。" msgid "Retract amount before wipe" msgstr "擦拭前的回抽量" msgid "" -"The length of fast retraction before wipe, relative to retraction length" +"The length of fast retraction before wipe, relative to retraction length." msgstr "擦拭之前的回抽长度，用总回抽长度的百分比表示。" msgid "Retract when change layer" msgstr "换层时回抽" -msgid "Force a retraction when changes layer" +msgid "Force a retraction when changes layer." msgstr "强制在换层时回抽。" msgid "Retraction Length" @@ -11693,17 +14252,15 @@ msgstr "回抽长度" msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"挤出机中的一些材料会被拉回特定长度，避免空驶较长时材料渗出。设置为0表示关闭回" -"抽。" -msgid "Long retraction when cut(experimental)" +msgid "Long retraction when cut (beta)" msgstr "切料时回抽（实验）" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" @@ -11714,39 +14271,48 @@ msgid "Retraction distance when cut" msgstr "切料回抽距离" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." msgstr "实验性选项。在更换耗材丝时，切断前的回抽长度" -msgid "Z hop when retract" -msgstr "回抽时抬升Z" +msgid "Long retraction when extruder change" +msgstr "" + +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Z抬升高度" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "回抽完成之后，喷嘴轻微抬升，和打印件之间产生一定间隙。这能够避免空驶时喷嘴和" "打印件剐蹭和碰撞。使用螺旋线抬升z能够减少拉丝。" -msgid "Z hop lower boundary" +msgid "Z-hop lower boundary" msgstr "Z抬升下边界" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "只有当Z高于此值且低于参数(Z抬升上边界)时，Z抬升才会生效" -msgid "Z hop upper boundary" +msgid "Z-hop upper boundary" msgstr "Z抬升上边界" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "如果该值为正，则Z抬升仅在Z高于参数(Z抬升下边界)且低于该值时才会生效" -msgid "Z hop type" -msgstr "抬Z类型" +msgid "Z-hop type" +msgstr "Z抬升类型" + +msgid "Type of Z-hop." +msgstr "Z轴抬升类型。" msgid "Slope" msgstr "梯形" @@ -11758,8 +14324,8 @@ msgid "Traveling angle" msgstr "空驶抬高角度" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." msgstr "" msgid "Only lift Z above" @@ -11782,7 +14348,7 @@ msgid "On surfaces" msgstr "仅表面抬Z" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" "强制Z抬升行为。此设置受上述设置的影响（仅在高度以下抬Z/仅在高度以上抬Z）。" @@ -11799,6 +14365,18 @@ msgstr "仅底面" msgid "Top and Bottom" msgstr "顶面和地面" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "远程挤出机" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "额外回填长度" @@ -11815,16 +14393,16 @@ msgstr "当换色后回抽被补偿时，挤出机将推入额外数量的耗材 msgid "Retraction Speed" msgstr "回抽速度" -msgid "Speed of retractions" -msgstr "回抽速度" +msgid "Speed for retracting filament from the nozzle." +msgstr "从喷嘴回抽耗材的速度" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "装填速度" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" -msgstr "耗材丝装填的速度，0表示和回抽速度一致。" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." +msgstr "" msgid "Use firmware retraction" msgstr "使用固件回抽" @@ -11843,13 +14421,13 @@ msgid "Disable set remaining print time" msgstr "禁用M73剩余打印时间" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" +"Disable generating of the M73: Set remaining print time in the final G-code." msgstr "在最终生成的G-code中禁用M73命令：设置剩余打印时间" msgid "Seam position" msgstr "接缝位置" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "开始打印外墙的位置" msgid "Nearest" @@ -11858,6 +14436,9 @@ msgstr "最近" msgid "Aligned" msgstr "对齐" +msgid "Aligned back" +msgstr "背部对齐" + msgid "Back" msgstr "背面" @@ -11929,13 +14510,13 @@ msgstr "斜拼接缝速度" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" "这个选项设置斜拼接缝的打印速度。建议以较慢的速度（小于100mm/s）打印斜拼接缝。" "如果设置的速度与外墙或内墙的速度相差较大，建议启用“平滑挤出率”。如果此处指定" @@ -11989,9 +14570,10 @@ msgid "Role base wipe speed" msgstr "自动擦拭速度" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" "擦拭速度由当前挤出类型的速度决定。例如，如果擦拭动作紧随外墙，擦拭速度将使用" "外墙的速度。" @@ -12010,15 +14592,15 @@ msgid "Wipe before external loop" msgstr "额外的外墙打印前擦拭" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" "为了最大限度地减少在使用外/内或内/外/内墙打印顺序时，外墙起始处的潜在过挤出，" "在外墙起始处外略微向内执行回填。这样，任何潜在的过挤都会隐藏在外表面之下。\n" @@ -12031,9 +14613,9 @@ msgstr "擦拭速度" msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" "擦拭速度是根据此配置中指定的速度设置确定的。如果该值以百分比形式表示（例如" "80%），则将根据上方的移动速度设置进行计算。该参数的默认值为80%。" @@ -12041,51 +14623,71 @@ msgstr "" msgid "Skirt distance" msgstr "Skirt距离" -msgid "Distance from skirt to brim or object" +msgid "The distance from the skirt to the brim or the object." msgstr "从skirt到模型或者brim的距离" +msgid "Skirt start point" +msgstr "Skirt起始点" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "从模型中心到skirt起始点的角度。0是最右边的位置，逆时针是正角度。" + msgid "Skirt height" msgstr "Skirt高度" -msgid "How many layers of skirt. Usually only one layer" +msgid "How many layers of skirt. Usually only one layer." msgstr "skirt有多少层。通常只有一层" +msgid "Single loop after first layer" +msgstr "首层后单圈" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" + msgid "Draft shield" msgstr "风挡" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" -"打印风挡有助于保护ABS或ASA材料的打印件，避免因气流流动产生变形或从打印床上脱" -"落。通常只有在开放式框架打印机上需要使用它，即没有封箱的打印机。\n" +"风挡对于保护ABS或ASA打印件免受风力的影响，防止翘曲和从打印床上脱落是非常有用" +"的。通常只有在没有封箱的开放式打印机上才需要。\n" "\n" -"选项：\n" -"启用 = Skirt和您的打印物体一样高。\n" -"限制 = Skirt高度将由Skirt高度选项指定。\n" -"\n" -"注意：当风挡功能启用时，Skirt将在远离物体自身的Skirt一定距离处打印。因此，如" -"果同时启用了Brims，则可能与Skirt相交。为避免这种情况，请增加Skirt距离值。\n" - -msgid "Limited" -msgstr "限制" +"启用 = skirt的高度与最高的打印对象一样高。否则的话会使用'skirt高度'。\n" +"注意：启用风挡后，skirt将会在距离模型'skirt距离'的地方打印。因此，如果brim启" +"用，可能会与其相交。为了避免这种情况，增加skirt距离值。\n" msgid "Enabled" msgstr "启用" +msgid "Skirt type" +msgstr "Skirt类型" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "合并 - 所有对象共用一个skirt，Per object - 每个对象单独的skirt。" + +msgid "Per object" +msgstr "按对象" + msgid "Skirt loops" msgstr "Skirt圈数" -msgid "Number of loops for the skirt. Zero means disabling skirt" +msgid "Number of loops for the skirt. Zero means disabling skirt." msgstr "skirt的圈数。0表示关闭skirt。" msgid "Skirt speed" @@ -12101,16 +14703,20 @@ msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" -"打印skirt时的最小挤出长度，单位为mm。0表示关闭此功能。\n" +"打印裙边时的最小耗材挤出长度，单位为毫米。0表示禁用此功能。\n" "\n" -"如果打印机设置为不使用擦拭塔，使用非零值是有用的。" +"如果打印机设置为不打印起始擦嘴线，建议使用非零值。\n" +"在排列或验证物体距离时，最终的圈数不会被纳入计算。在这种情况下请增加圈数。" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" "当层预估打印时间小于这个数值时，打印速度将会降低，从而获得更好的冷却效果。" @@ -12119,21 +14725,27 @@ msgstr "稀疏填充最小阈值" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" +"internal solid infill." msgstr "小于这个阈值的稀疏填充区域将会被内部实心填充替代。" +msgid "Solid infill" +msgstr "实心填充" + +msgid "Filament to print solid infill." +msgstr "打印实心填充的耗材丝。" + msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." msgstr "内部实心填充的线宽。如果以%表示，它将基于喷嘴直径来计算。" -msgid "Speed of internal solid infill, not the top and bottom surface" +msgid "Speed of internal solid infill, not the top and bottom surface." msgstr "内部实心填充的速度，不是顶面和底面。" msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" "沿着对象的外轮廓螺旋上升，将实体模型转变为只有底面实心层和侧面单层墙壁的打" "印。最后生成的打印件没有接缝。" @@ -12142,8 +14754,8 @@ msgid "Smooth Spiral" msgstr "光滑螺旋模式" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" "光滑螺旋模式平滑X和Y轴移动，从而在所有方向上都没有可见的接缝，即使在不垂直的" "墙壁上也是如此。" @@ -12151,13 +14763,35 @@ msgstr "" msgid "Max XY Smoothing" msgstr "最大XY平滑阈值" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" "在XY平面上移动点的最大距离，以尝试实现平滑的螺旋。如果以%表示，它将基于喷嘴直" "径来计算。" +msgid "Spiral starting flow ratio" +msgstr "螺旋开始流量比" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" + +msgid "Spiral finishing flow ratio" +msgstr "螺旋结束流量比" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" + msgid "" "If smooth or traditional mode is selected, a timelapse video will be " "generated for each print. After each layer is printed, a snapshot is taken " @@ -12179,19 +14813,44 @@ msgstr "传统模式" msgid "Temperature variation" msgstr "软化温度" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" + +msgid "Preheat time" +msgstr "预热时间" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" + +msgid "Preheat steps" +msgstr "预热步骤" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" + msgid "Start G-code" msgstr "起始G-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "整个打印开始前的起始G-code" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "开始使用这个耗材丝打印的起始G-code" msgid "Single Extruder Multi Material" msgstr "单挤出机多材料" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "使用单喷嘴打印多耗材" msgid "Manual Filament Change" @@ -12204,15 +14863,14 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" -"启用该选项可以在打印开始时省略自定义更换耗材丝的 " -"G-code。整个打印过程中的工具头指令（如 " -"T0）将会被跳过。这对于手动多材料打印十分有用，其将会使用 M600/PAUSE " -"指令来使您可以进行手动对耗材丝进行更换。" +"启用该选项可以在打印开始时省略自定义更换耗材丝的 G-code。整个打印过程中的工具" +"头指令（如 T0）将会被跳过。这对于手动多材料打印十分有用，其将会使用 M600/" +"PAUSE 指令来使您可以进行手动对耗材丝进行更换。" msgid "Purge in prime tower" msgstr "冲刷进擦拭塔" -msgid "Purge remaining filament into prime tower" +msgid "Purge remaining filament into prime tower." msgstr "冲刷剩余的耗材丝进入擦拭塔" msgid "Enable filament ramming" @@ -12222,8 +14880,8 @@ msgid "No sparse layers (beta)" msgstr "无稀疏层 （实验）" msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" @@ -12287,31 +14945,37 @@ msgid "Enable support generation." msgstr "开启支撑生成。" msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"普通（自动）和树状（自动）用于自动生成支撑体。如果选择普通（手动）或树状（手" -"动），仅会在支撑强制面上生成支撑。" +"普通（自动）和树状（自动）用于自动生成支撑。如果选择普通（手动）或树状（手" +"动），则仅在支撑强制面上生成支撑。" -msgid "normal(auto)" +msgid "Normal (auto)" msgstr "普通(自动)" -msgid "tree(auto)" +msgid "Tree (auto)" msgstr "树状(自动)" -msgid "normal(manual)" +msgid "Normal (manual)" msgstr "普通(手动)" -msgid "tree(manual)" +msgid "Tree (manual)" msgstr "树状(手动)" -msgid "Support/object xy distance" +msgid "Support/object XY distance" msgstr "支撑/模型xy间距" -msgid "XY separation between an object and its support" +msgid "XY separation between an object and its support." msgstr "模型和支撑之间XY分离距离" +msgid "Support/object first layer gap" +msgstr "支撑/对象首层间距" + +msgid "XY separation between an object and its support at the first layer." +msgstr "物体与其首层支撑之间的 XY 间隔。" + msgid "Pattern angle" msgstr "模式角度" @@ -12321,7 +14985,7 @@ msgstr "设置支撑图案在水平面的旋转角度。" msgid "On build plate only" msgstr "仅在构建板生成" -msgid "Don't create support on model surface, only on build plate" +msgid "Don't create support on model surface, only on build plate." msgstr "不在模型表面上生成支撑，只在热床上生成。" msgid "Support critical regions only" @@ -12332,22 +14996,22 @@ msgid "" "etc." msgstr "仅对关键区域生成支撑，包括尖尾、悬臂等。" -msgid "Remove small overhangs" -msgstr "移除小悬空" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "移除可能并不需要支撑的小悬空。" +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" msgstr "顶部Z距离" -msgid "The z gap between the top support interface and object" +msgid "The Z gap between the top support interface and object." msgstr "支撑顶部和模型之间的z间隙" msgid "Bottom Z distance" msgstr "底部Z距离" -msgid "The z gap between the bottom support interface and object" +msgid "The Z gap between the bottom support interface and object." msgstr "支撑生成于模型表面时，支撑面底部和模型之间的z间隙" msgid "Support/raft base" @@ -12355,7 +15019,7 @@ msgstr "支撑/筏层主体" msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" +"filament for support and current filament is used." msgstr "" "打印支撑主体和筏层的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材" @@ -12383,19 +15047,19 @@ msgstr "支撑/筏层界面" msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" +"for support interface and current filament is used." msgstr "打印支撑接触面的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材" msgid "Top interface layers" msgstr "顶部接触面层数" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "顶部接触面层数" msgid "Bottom interface layers" msgstr "底部接触面层数" -msgid "Number of bottom interface layers" +msgid "Number of bottom interface layers." msgstr "底部界面层的数量" msgid "Same as top" @@ -12404,22 +15068,24 @@ msgstr "和顶部相同" msgid "Top interface spacing" msgstr "顶部接触面线距" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "接触面的线距。0代表实心接触面。" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" msgstr "底部接触面线距" -msgid "Spacing of bottom interface lines. Zero means solid interface" +msgid "Spacing of bottom interface lines. Zero means solid interface." msgstr "底部接触面走线的线距。0表示实心接触面。" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "支撑面速度" msgid "Base pattern" msgstr "支撑主体图案" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "支撑走线图案" msgid "Rectilinear grid" @@ -12434,7 +15100,7 @@ msgstr "支撑面图案" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "支撑接触面的走线图案。非可溶支撑接触面的缺省图案为直线，可溶支撑接触面的缺省" "图案为同心。" @@ -12445,16 +15111,16 @@ msgstr "交叠的直线" msgid "Base pattern spacing" msgstr "主体图案线距" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "支撑线距" msgid "Normal Support expansion" msgstr "普通支撑拓展" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "在水平方向对普通支撑进行拓展（+）或收缩（-）" -msgid "Speed of support" +msgid "Speed of support." msgstr "支撑打印速度" msgid "" @@ -12472,9 +15138,15 @@ msgstr "" "强壮的支撑结构，但用料更多；而混合树是苗条树和普通支撑的结合，它会在大的平面" "悬垂下创建与正常支撑类似的结构（默认）。" +msgid "Default (Grid/Organic)" +msgstr "默认 (网格/有机)" + msgid "Snug" msgstr "紧贴" +msgid "Organic" +msgstr "有机树" + msgid "Tree Slim" msgstr "苗条树" @@ -12484,15 +15156,12 @@ msgstr "粗壮树" msgid "Tree Hybrid" msgstr "混合树" -msgid "Organic" -msgstr "有机树" - msgid "Independent support layer height" msgstr "支撑独立层高" msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" "支撑层使用与对象层独立的层高。这是为了支持自定义z-gap并且节省打印时间。当擦料" @@ -12506,12 +15175,21 @@ msgid "" "threshold." msgstr "将会为悬垂角度低于阈值的模型表面生成支撑。" +msgid "Threshold overlap" +msgstr "阈值支撑比例" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" + msgid "Tree support branch angle" msgstr "树状支撑分支角度" msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" "此设置确定了允许树状支撑的最大悬垂角度。如果角度增加，可以更水平地打印分支，" @@ -12550,26 +15228,18 @@ msgstr "" "用于调整分支尖端所生成的支撑结构的密度。值越大悬垂越好，但更难拆支撑，因此，" "如果需要密集的接触面，建议启用顶部接触面相关参数，而不是较高的分支密度。" -msgid "Adaptive layer height" -msgstr "自适应层高" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "启用此选项将自动计算（除第一层外）树状支撑的层高。" - msgid "Auto brim width" msgstr "自动裙边宽度" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" +"automatically calculated." msgstr "启用此选项意味着树状支撑的裙边宽度将自动计算自动计算" msgid "Tree support brim width" msgstr "树状支撑裙边宽度" -msgid "Distance from tree branch to the outermost brim line" +msgid "Distance from tree branch to the outermost brim line." msgstr "从树状支撑分支到最外层裙边线的距离" msgid "Tip Diameter" @@ -12599,62 +15269,87 @@ msgstr "" "分支直径的角度，随着分支向底部逐渐变厚。如果角度为0，分支将在其长度上拥有均匀" "的厚度。一点角度可以增加organic的稳定性。" -msgid "Branch Diameter with double walls" -msgstr "分支直径双层墙" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"该值大于以分支直径得到的圆形面积时，将打印双层墙，以保持稳定性。如不使用双层" -"墙，请将该值设置为0。" - msgid "Support wall loops" msgstr "支撑外墙层数" -msgid "This setting specify the count of walls around support" -msgstr "此设置指定了支撑的外墙层数" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "此设置指定[0,2]范围内的支撑墙层数。0表示自动。" msgid "Tree support with infill" msgstr "树状支撑生成填充" msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" +"support." msgstr "这个设置决定是否为树状支撑内部的空腔生成填充。" +msgid "Ironing Support Interface" +msgstr "支撑界面熨烫" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "支撑熨烫图案" + +msgid "Support Ironing flow" +msgstr "支撑熨烫流量" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "支撑熨烫线间距" + msgid "Activate temperature control" msgstr "激活温度控制" msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"启用该选项以控制打印仓温度，这将会在\"machine_start_gcode" -"\"之前添加一个M191命令。\n" -"G-code命令：M141/M191 S(0-255)" msgid "Chamber temperature" msgstr "机箱温度" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" -"更高的腔温可以帮助抑制或减少翘曲，同时可能会提高高温材料（如ABS、ASA、PC、PA" -"等）的层间粘合强度。与此同时，ABS和ASA的空气过滤性能会变差。而对于PLA、PETG、" -"TPU、PVA等低温材料，为了避免堵塞，实际的腔温不应该过高，因此强烈建议使用0（表" -"示关闭）。" -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "除首层外的其它层的喷嘴温度" msgid "Detect thin wall" @@ -12662,17 +15357,17 @@ msgstr "检查薄壁" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "检查无法容纳两条走线的薄壁。使用单条走线打印。可能会打地不是很好，因为走线不" "再闭合。" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." msgstr "换料时插入的G-code，包括T命令。" -msgid "This gcode is inserted when the extrusion role is changed" +msgid "This G-code is inserted when the extrusion role is changed." msgstr "当挤出类型改变时会插入此G-code" msgid "" @@ -12680,7 +15375,7 @@ msgid "" "the nozzle diameter." msgstr "顶面的线宽。如果以%表示，它将基于喷嘴直径来计算。" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "顶面实心填充的速度" msgid "Top shell layers" @@ -12689,7 +15384,7 @@ msgstr "顶部壳体层数" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "顶部壳体实心层层数，包括顶面。当由该层数计算的厚度小于顶部壳体厚度，切片时会" "增加顶部壳体的层数" @@ -12704,22 +15399,43 @@ msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" "如果由顶部壳体层数算出的厚度小于这个数值，那么切片时将自动增加顶部壳体层数。" "这能够避免当层高很小时，顶部壳体过薄。0表示关闭这个设置，同时顶部壳体的厚度完" "全由顶部壳体层数决定" -msgid "Speed of travel which is faster and without extrusion" +msgid "Top surface density" +msgstr "顶面密度" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "底面密度" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." msgstr "空驶的速度。空驶是无挤出量的快速移动。" msgid "Wipe while retracting" msgstr "回抽时擦拭" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" "当回抽时，让喷嘴沿着前面的走线方向继续移动，清除掉喷嘴上的漏料。这能够避免空" "驶结束打印新的区域时产生斑点。" @@ -12728,12 +15444,11 @@ msgid "Wipe Distance" msgstr "擦拭距离" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." @@ -12754,6 +15469,12 @@ msgstr "" "擦拭塔可以用来清理喷嘴上的残留料和让喷嘴内部的腔压达到稳定状态，以避免打印物" "体时出现外观瑕疵。" +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" + msgid "Purging volumes" msgstr "冲刷体积" @@ -12771,15 +15492,20 @@ msgstr "清理量" msgid "The volume of material to prime extruder on tower." msgstr "擦拭塔上的清理量" -msgid "Width of prime tower" +msgid "Width of the prime tower." msgstr "擦拭塔宽度" msgid "Wipe tower rotation angle" msgstr "擦拭塔旋转角度" -msgid "Wipe tower rotation angle with respect to x-axis." +msgid "Wipe tower rotation angle with respect to X axis." msgstr "擦拭塔相对于x轴的旋转角度" +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" + msgid "Stabilization cone apex angle" msgstr "稳定锥体顶角" @@ -12788,12 +15514,6 @@ msgid "" "Larger angle means wider base." msgstr "塔锥体顶角的角度，用于稳定擦拭塔。角度越大，底座越宽。" -msgid "Wipe tower purge lines spacing" -msgstr "擦拭塔冲刷线间距" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "擦拭塔上冲刷线的间距" - msgid "Maximum wipe tower print speed" msgstr "擦拭塔最大打印速度" @@ -12811,7 +15531,7 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" @@ -12832,8 +15552,44 @@ msgstr "" "\n" "对于擦拭塔外墙，无论此设置如何，都使用内墙速度。" -msgid "Wipe tower extruder" -msgstr "擦拭塔挤出机" +msgid "Wall type" +msgstr "墙体类型" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" +"擦拭塔外墙类型。\n" +"1. 矩形：默认墙体类型，具有固定宽度和高度的矩形。\n" +"2. 圆锥：底部有圆角的圆锥，有助于稳定擦拭塔。\n" +"3. 加强筋：在塔壁上增加四个加强筋以提高稳定性。" + +msgid "Extra rib length" +msgstr "额外加强筋长度" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" +"正值可以增加加强筋墙的尺寸，负值可以减小尺寸。但是，加强筋墙的尺寸不能小于由" +"清洁体积决定的尺寸。" + +msgid "Rib width" +msgstr "加强筋宽度" + +msgid "Rib width." +msgstr "加强筋宽度。" + +msgid "Fillet wall" +msgstr "墙体加圆角" + +msgid "The wall of prime tower will fillet." +msgstr "擦料塔的墙壁做倒角处理" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " @@ -12853,6 +15609,18 @@ msgstr "" "此矢量可保存所需的体积，用于更改每个擦拭塔上工具所使用的from/to体积 。这些值" "用于简化完全冲刷体积的创建。" +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" + msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " @@ -12873,8 +15641,8 @@ msgstr "" msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" "换料后的过渡料会被用来打印这个对象。这样可以减少材料浪费和缩短打印时间，但是" "这个对象的外观会是混色的。该功能只有在启用料塔的时候才生效。" @@ -12885,28 +15653,57 @@ msgstr "最大桥接距离" msgid "Maximal distance between supports on sparse infill sections." msgstr "稀疏填充剖面上支撑之间的最大距离。" +msgid "Wipe tower purge lines spacing" +msgstr "擦拭塔冲刷线间距" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "擦拭塔上冲刷线的间距" + +msgid "Extra flow for purging" +msgstr "额外冲刷量" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"用于擦拭塔冲刷线的额外流量。这使冲刷线比正常情况下更厚或更窄。间距会自动调" +"整。" + +msgid "Idle temperature" +msgstr "待机温度" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"在多工具设置中，当前未使用的工具的喷嘴温度。这仅在打印设置中启用'防滴漏'时使" +"用。设置为0以禁用。" + msgid "X-Y hole compensation" msgstr "X-Y 孔洞尺寸补偿" msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"垂直的孔洞的尺寸将在X-Y方向收缩或拓展特定值。正值代表扩大孔洞。负值代表缩小孔" -"洞。这个功能通常在模型有装配问题时微调尺寸" +"物体中的孔洞将在XY平面内根据配置值进行扩展或收缩。正值使孔洞变大，负值使孔洞" +"变小。此功能用于在物体出现装配问题时微调尺寸。" msgid "X-Y contour compensation" msgstr "X-Y 外轮廓尺寸补偿" msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"模型外轮廓的尺寸将在X-Y方向收缩或拓展特定值。正值代表扩大。负值代表缩小。这个" -"功能通常在模型有装配问题时微调尺寸" +"物体的外轮廓将在XY平面内根据配置值进行扩展或收缩。正值使轮廓变大，负值使轮廓" +"变小。此功能用于在物体出现装配问题时微调尺寸。" msgid "Convert holes to polyholes" msgstr "将圆孔转换为多边型孔" @@ -12928,7 +15725,7 @@ msgstr "多边型孔检测边缘" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" @@ -12957,30 +15754,30 @@ msgstr "G-code缩略图的格式" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "G-Code 缩略图格式: PNG 质量最佳，JPG 尺寸最小，QOI 用于低内存固件" msgid "Use relative E distances" msgstr "使用相对E距离" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" +"相对挤出建议在使用\"label_objects\"选项时使用。某些挤出机在未选中此选项（绝对" +"挤出模式）时工作得更好。擦拭塔仅与相对模式兼容。建议在大多数打印机上使用。默" +"认为选中状态。" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "经典墙生成器产生的墙走线具有一致的挤出宽度，对狭窄区域使用填缝。Arachne引擎则" "产生变线宽的墙走线" -msgid "Classic" -msgstr "经典" - msgid "Arachne" msgstr "Arachne" @@ -12990,7 +15787,7 @@ msgstr "墙过渡长度" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" "当零件逐渐变薄导致墙的层数发生变化时，需要在过渡段分配一定的空间来分割和连接" "墙走线。参数值表示为相对于喷嘴直径的百分比" @@ -13005,7 +15802,7 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" "防止特定厚度变化规律的局部在多一层墙和少一层墙之间来回转换。这个参数将挤压宽" "度的范围扩大到[墙最小宽度-参数值, 2*墙最小宽度+参数值]。增大参数可以减少转换" @@ -13020,7 +15817,7 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" "何时在偶数和奇数墙层数之间创建过渡段。角度大于这个阈值的楔形将不创建过渡段，" "并且不会在楔形中心打印墙走线以填补剩余空间。减小这个数值能减少中心墙走线的数" @@ -13031,7 +15828,7 @@ msgstr "墙分布计数" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "从中心开始计算的墙层数，线宽变化需要分布在这些墙走线上。较低的数值意味着外墙" "宽度更不易被改变" @@ -13041,12 +15838,10 @@ msgstr "最小特征尺寸" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"薄壁特征的最小厚度。比这个数值还薄的特征将不被打印，而比最小特征厚度还厚的特" -"征将被加宽到墙最小宽度。参数值表示为相对喷嘴直径的百分比" msgid "Minimum wall length" msgstr "最小允许的墙长度" @@ -13056,9 +15851,9 @@ msgid "" "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "调整这个值以省略打印短的、未闭合的墙，这些可能会增加打印时间。设置较高的值将" @@ -13085,7 +15880,7 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" "用于替换模型细小特征（根据最小特征尺寸）的墙线宽。如果墙最小线宽小于最小特征" "的厚度，则墙将变得和特征本身一样厚。参数值表示为相对喷嘴直径的百分比" @@ -13094,9 +15889,9 @@ msgid "Detect narrow internal solid infill" msgstr "识别狭窄内部实心填充" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" "此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充加" "快打印速度。否则使用默认的直线填充。" @@ -13113,25 +15908,145 @@ msgstr "线宽过大" msgid " not in range " msgstr " 不在合理的区间" +msgid "Export 3MF" +msgstr "导出3MF" + +msgid "Export project as 3MF." +msgstr "导出项目为3MF。" + +msgid "Export slicing data" +msgstr "导出切片数据" + +msgid "Export slicing data to a folder." +msgstr "导出切片数据到目录" + +msgid "Load slicing data" +msgstr "导入切片数据" + +msgid "Load cached slicing data from directory." +msgstr "从目录导入缓存的切片数据" + +msgid "Export STL" +msgstr "导出STL文件" + +msgid "Export the objects as single STL." +msgstr "将对象导出为单个STL。" + +msgid "Export multiple STLs" +msgstr "导出多个STL" + +msgid "Export the objects as multiple STLs to directory." +msgstr "将对象导出为多个STL到目录。" + +msgid "Slice" +msgstr "切片" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "切片平台：0-所有平台，i-第i个平台，其他-无效" + +msgid "Show command help." +msgstr "显示命令行帮助。" + +msgid "UpToDate" +msgstr "最新" + +msgid "Update the config values of 3MF to latest." +msgstr "将3mf的配置值更新为最新值。" + +msgid "downward machines check" +msgstr "向下机器检查" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "" + +msgid "Load default filaments" +msgstr "加载默认打印材料" + +msgid "Load first filament as default for those not loaded." +msgstr "加载第一个打印材料为默认材料" + msgid "Minimum save" msgstr "最小保存" -msgid "export 3mf with minimum size." +msgid "Export 3MF with minimum size." msgstr "以最小尺寸导出3mf。" +msgid "mtcpp" +msgstr "材料温度补偿" + +msgid "max triangle count per plate for slicing." +msgstr "切片时每个盘的最大三角形数。" + +msgid "mstpp" +msgstr "材料温度暂停" + +msgid "max slicing time per plate in seconds." +msgstr "每个盘的最大切片时间（秒）。" + msgid "No check" msgstr "不要检查" -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "不要运行任何有效性检查，如gcode路径冲突检查。" +msgid "Do not run any validity checks, such as G-code path conflicts check." +msgstr "不要运行任何有效性检查，如G-code路径冲突检查。" + +msgid "Normative check" +msgstr "规范性检查" + +msgid "Check the normative items." +msgstr "检查规范性项目。" + +msgid "Output Model Info" +msgstr "输出模型信息" + +msgid "Output the model's information." +msgstr "输出模型的信息。" + +msgid "Export Settings" +msgstr "导出配置" + +msgid "Export settings to a file." +msgstr "导出配置到文件。" + +msgid "Send progress to pipe" +msgstr "将进度发送到管道" + +msgid "Send progress to pipe." +msgstr "将进度发送到管道。" + +msgid "Arrange Options" +msgstr "摆放选项" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "摆放选项：0-关闭，1-开启，其他-自动" + +msgid "Repetition count" +msgstr "重复次数" + +msgid "Repetition count of the whole model." +msgstr "整个模型的重复次数" msgid "Ensure on bed" msgstr "确保在热床上" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" +"Lift the object above the bed when it is partially below. Disabled by " +"default." msgstr "当物体部分位于热床的下方时，将其提升到热床的上方。默认情况下禁用" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"将提供的模型排列在一个板中，并将它们合并到单个模型中，以便执行一次操作。" + +msgid "Convert Unit" +msgstr "转换单位" + +msgid "Convert the units of model." +msgstr "转换模型的单位" + msgid "Orient Options" msgstr "方向选项" @@ -13141,12 +16056,80 @@ msgstr "方向选项：0-禁用，1-启用，其他-自动" msgid "Rotation angle around the Z axis in degrees." msgstr "绕Z轴的旋转角度（以度为单位）。" +msgid "Rotate around X" +msgstr "绕X旋转" + +msgid "Rotation angle around the X axis in degrees." +msgstr "绕X轴的旋转角度（以度为单位）。" + msgid "Rotate around Y" msgstr "绕Y旋转" msgid "Rotation angle around the Y axis in degrees." msgstr "绕Y轴的旋转角度（以度为单位）" +msgid "Scale the model by a float factor." +msgstr "根据因子缩放模型" + +msgid "Load General Settings" +msgstr "加载通用设置" + +msgid "Load process/machine settings from the specified file." +msgstr "从指定文件加载工艺/打印机设置" + +msgid "Load Filament Settings" +msgstr "加载耗材丝设置" + +msgid "Load filament settings from the specified file list." +msgstr "从指定文件加载耗材丝设置" + +msgid "Skip Objects" +msgstr "零件跳过" + +msgid "Skip some objects in this print." +msgstr "打印过程中跳过一些零件" + +msgid "Clone Objects" +msgstr "克隆对象" + +msgid "Clone objects in the load list." +msgstr "克隆加载列表中的对象。" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "使用最新的加载最新工艺/机器设置" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "在使用最新设置时，从指定的文件中加载最新的进程/机器设置。" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "使用最新加载最新耗材丝设置" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "" + +msgid "Downward machines check" +msgstr "向下机器检查" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "" + +msgid "downward machines settings" +msgstr "向下机器设置" + +msgid "The machine settings list needs to do downward checking." +msgstr "机器设置列表需要进行向下检查。" + +msgid "Load assemble list" +msgstr "加载组合列表" + +msgid "Load assemble object list from config file." +msgstr "从配置文件加载组合对象列表。" + msgid "Data directory" msgstr "数据目录" @@ -13158,44 +16141,144 @@ msgstr "" "在给定目录加载和存储设置。这对于维护不同的配置文件或包括网络存储中的配置非常" "有用。" -msgid "Load custom gcode" +msgid "Output directory" +msgstr "输出路径" + +msgid "Output directory for the exported files." +msgstr "导出文件的输出路径。" + +msgid "Debug level" +msgstr "调试等级" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， 5:" +"trace\n" + +msgid "Enable timelapse for print" +msgstr "为打印启用延时摄影" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "如果启用，此切片将被视为使用延时摄影。" + +msgid "Load custom G-code" msgstr "加载自定义G-code" -msgid "Load custom gcode from json" +msgid "Load custom G-code from json." msgstr "从json文件加载自定义G-code" -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "加载耗材丝ID" + +msgid "Load filament IDs for each object." +msgstr "为每个对象加载耗材丝ID。" + +msgid "Allow multiple colors on one plate" +msgstr "允许在一个打印板上使用多种颜色" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "如果启用，自动排列将允许在一个打印板上使用多种颜色" + +msgid "Allow rotation when arranging" +msgstr "排列时允许旋转" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "如果启用，排列功能将在放置对象时允许旋转。" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "排列时避开挤出校准区域" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "" +#, fuzzy +msgid "Skip modified G-code in 3MF" +msgstr "跳过3mf中修改过的G代码" + +#, fuzzy +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "跳过3mf中来自打印机或耗材预设的修改过的G代码。" + +msgid "MakerLab name" +msgstr "MakerLab名称" + +#, fuzzy +msgid "MakerLab name to generate this 3MF." +msgstr "生成此3mf的MakerLab名称。" + +msgid "MakerLab version" +msgstr "MakerLab版本" + +#, fuzzy +msgid "MakerLab version to generate this 3MF." +msgstr "生成此3mf的MakerLab版本。" + +msgid "Metadata name list" +msgstr "元数据名称列表" + +#, fuzzy +msgid "Metadata name list added into 3MF." +msgstr "添加到3mf中的元数据名称列表。" + +msgid "Metadata value list" +msgstr "元数据值列表" + +#, fuzzy +msgid "Metadata value list added into 3MF." +msgstr "添加到3mf中的元数据值列表。" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced" +msgstr "允许较新版本的3mf进行切片" + +#, fuzzy +msgid "Allow 3MF with newer version to be sliced." +msgstr "允许较新版本的3mf进行切片。" + +msgid "Current Z-hop" +msgstr "当前Z轴抬升" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "包含自定义G代码块开头的Z轴抬升。" msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" -msgid "Extra deretraction" -msgstr "" +msgid "Extra de-retraction" +msgstr "额外装填" -msgid "Currently planned extra extruder priming after deretraction." +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "当前挤出头在装填后进行额外的预挤出" + +msgid "Absolute E position" +msgstr "绝对E位置" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." msgstr "" msgid "Current extruder" -msgstr "" +msgstr "当前挤出机" msgid "Zero-based index of currently used extruder." -msgstr "" +msgstr "当前使用挤出机的零基索引" msgid "Current object index" -msgstr "" +msgstr "当前对象索引" msgid "" "Specific for sequential printing. Zero-based index of currently printed " @@ -13203,13 +16286,13 @@ msgid "" msgstr "" msgid "Has wipe tower" -msgstr "" +msgstr "有擦料塔" msgid "Whether or not wipe tower is being generated in the print." -msgstr "" +msgstr "打印中是否生成擦料塔。" msgid "Initial extruder" -msgstr "" +msgstr "初始挤出机" msgid "" "Zero-based index of the first extruder used in the print. Same as " @@ -13217,7 +16300,7 @@ msgid "" msgstr "" msgid "Initial tool" -msgstr "" +msgstr "初始工具" msgid "" "Zero-based index of the first extruder used in the print. Same as " @@ -13225,31 +16308,38 @@ msgid "" msgstr "" msgid "Is extruder used?" +msgstr "挤出机是否启用？" + +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." msgstr "" -msgid "Vector of bools stating whether a given extruder is used in the print." -msgstr "" +msgid "Has single extruder MM priming" +msgstr "单挤出机多材料预挤出" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "此打印中是否使用额外的多材料预注区域？" msgid "Volume per extruder" -msgstr "" +msgstr "每个挤出机的体积" msgid "Total filament volume extruded per extruder during the entire print." -msgstr "" +msgstr "整个打印过程中每个挤出机挤出的总耗材体积" -msgid "Total toolchanges" -msgstr "" +msgid "Total tool changes" +msgstr "总工具更换次数" -msgid "Number of toolchanges during the print." -msgstr "" +msgid "Number of tool changes during the print." +msgstr "打印期间的工具更换次数。" msgid "Total volume" -msgstr "" +msgstr "总体积" msgid "Total volume of filament used during the entire print." -msgstr "" +msgstr "整个打印过程中使用的耗材丝总体积。" msgid "Weight per extruder" -msgstr "" +msgstr "每个挤出机的重量" msgid "" "Weight per extruder extruded during the entire print. Calculated from " @@ -13257,7 +16347,7 @@ msgid "" msgstr "" msgid "Total weight" -msgstr "" +msgstr "总重量" msgid "" "Total weight of the print. Calculated from filament_density value in " @@ -13265,50 +16355,50 @@ msgid "" msgstr "" msgid "Total layer count" -msgstr "" +msgstr "总层数" msgid "Number of layers in the entire print." -msgstr "" +msgstr "整个打印中的层数。" msgid "Number of objects" -msgstr "" +msgstr "对象数量" msgid "Total number of objects in the print." -msgstr "" +msgstr "打印中的对象总数。" msgid "Number of instances" -msgstr "" +msgstr "实例数量" msgid "Total number of object instances in the print, summed over all objects." -msgstr "" +msgstr "打印中所有对象实例的总数，所有对象相加。" msgid "Scale per object" -msgstr "" +msgstr "每个对象的缩放" msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" msgid "Input filename without extension" -msgstr "" +msgstr "输入文件名（无扩展名）" msgid "Source filename of the first object, without extension." +msgstr "第一个对象的源文件名，无扩展名。" + +msgid "" +"The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "" msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "" - -msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." msgstr "" msgid "First layer convex hull" -msgstr "" +msgstr "首层凸包" msgid "" "Vector of points of the first layer convex hull. Each element has the " @@ -13348,6 +16438,9 @@ msgstr "时" msgid "Minute" msgstr "分" +msgid "Second" +msgstr "秒" + msgid "Print preset name" msgstr "打印预设名称" @@ -13374,31 +16467,39 @@ msgstr "物理打印机名称" msgid "Name of the physical printer used for slicing." msgstr "用于切片的物理打印机的名称。" +msgid "Number of extruders" +msgstr "挤出机数量" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "" + msgid "Layer number" msgstr "层编号" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "当前层编号。从1开始编号（即第一层编号为1）。" -msgid "Layer z" -msgstr "" +msgid "Layer Z" +msgstr "层Z坐标" msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." msgstr "" -msgid "Maximal layer z" -msgstr "" +msgid "Maximal layer Z" +msgstr "最大层Z坐标" msgid "Height of the last layer above the print bed." -msgstr "" +msgstr "打印床上最后一层的高度" msgid "Filament extruder ID" -msgstr "" +msgstr "耗材挤出机ID" msgid "The current extruder ID. The same as current_extruder." -msgstr "" +msgstr "当前挤出机ID，与current_extruder相同" msgid "Error in zip archive" msgstr "zip文件中存在错误" @@ -13415,9 +16516,6 @@ msgstr "正在生成填充走线" msgid "Detect overhangs for auto-lift" msgstr "探测悬空区域为自动抬升做准备" -msgid "Generating support" -msgstr "正在生成支撑" - msgid "Checking support necessity" msgstr "正在检查支撑必要性" @@ -13436,6 +16534,9 @@ msgid "" "generation." msgstr "似乎对象%s有%s。请重新调整对象的方向或启用支持生成。" +msgid "Generating support" +msgstr "正在生成支撑" + msgid "Optimizing toolpath" msgstr "正在优化走线" @@ -13451,63 +16552,44 @@ msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "对象的XY尺寸补偿不会生效，因为在此对象上做过涂色操作。\n" "XY尺寸补偿不能与涂色功能一起使用。" -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "支撑：正在生成层%d的走线路径" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "支撑：正在检测悬空面" +msgid "Object name" +msgstr "对象名称" msgid "Support: generate contact points" msgstr "支撑：正在生成接触点" -msgid "Support: propagate branches" -msgstr "支撑：正在生长树枝" +msgid "Loading of a model file failed." +msgstr "加载模型文件失败。" -msgid "Support: draw polygons" -msgstr "支撑：正在生成多边形" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" -msgid "Support: generate toolpath" -msgstr "支撑：正在生成走线路径" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "支撑：正在生成层%d的多边形" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "支撑：正在修补层%d的空洞" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "支撑：正在生长层%d的树枝" +msgid "The supplied file couldn't be read because it's empty" +msgstr "无法读取提供的文件，因为该文件为空。" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "未知的文件格式。输入文件的扩展名必须为.stl、.obj 或 .amf（.xml）。" -msgid "Loading of a model file failed." -msgstr "加载模型文件失败。" - -msgid "The supplied file couldn't be read because it's empty" -msgstr "无法读取提供的文件，因为该文件为空。" - msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "未知的文件格式。输入文件的扩展名必须为.3mf或.zip .amf。" -msgid "Canceled" -msgstr "已取消" - msgid "load_obj: failed to parse" msgstr "加载对象：无法分析" msgid "load mtl in obj: failed to parse" -msgstr "" +msgstr "在obj中加载mtl：解析失败" msgid "The file contains polygons with more than 4 vertices." msgstr "该文件包含顶点超过4个的多边形。" @@ -13592,7 +16674,7 @@ msgid "" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "请输入有效值：\n" "起始值：>= %.1f\n" @@ -13604,7 +16686,7 @@ msgid "The name cannot be empty." msgstr "名称不能为空。" #, c-format, boost-format -msgid "The selected preset: %s is not found." +msgid "The selected preset: %s was not found." msgstr "未找到选定的预设：%s。" msgid "The name cannot be the same as the system preset name." @@ -13616,6 +16698,14 @@ msgstr "该名称与另一个现有预设名称相同。" msgid "create new preset failed." msgstr "创建新预设失败" +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" + msgid "" "Are you sure to cancel the current calibration and return to the home page?" msgstr "您确定要取消当前的校准并返回主页吗？" @@ -13636,23 +16726,17 @@ msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" "该机型每个喷嘴最多只能保存16个历史结果。您可以删除先已有历史结果再开始校准。" "或者您可以直接开始校准，但是无法创建新的校准历史结果。您仍继续校准吗？" -msgid "Connecting to printer..." -msgstr "正在连接打印机..." - -msgid "The machine has been connected and is currently in working mode" -msgstr "设备已连接，当前处于工作模式" - -msgid "The failed test result has been dropped." -msgstr "测试失败的结果已被删除。" - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "动态流量校准的结果已保存至打印机。" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13663,22 +16747,38 @@ msgstr "" "已经存在一个具有相同名称的历史校准结果：%s。相同名称的结果只会保存一个。您确" "定要覆盖历史结果吗？" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" + #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." msgstr "该机型每个喷嘴最多只能保存%d个历史结果, 该结果将不会被保存" +msgid "Connecting to printer..." +msgstr "正在连接打印机..." + +msgid "The failed test result has been dropped." +msgstr "测试失败的结果已被删除。" + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "动态流量校准的结果已保存至打印机。" + msgid "Internal Error" msgstr "内部错误" msgid "Please select at least one filament for calibration" msgstr "请至少选择一种材料进行校准。" -msgid "Flow rate calibration result has been saved to preset" +msgid "Flow rate calibration result has been saved to preset." msgstr "流量比例校准结果已保存到预设" -msgid "Max volumetric speed calibration result has been saved to preset" +msgid "Max volumetric speed calibration result has been saved to preset." msgstr "最大体积速度校准结果已保存到预设值" msgid "When do you need Flow Dynamics Calibration" @@ -13690,15 +16790,10 @@ msgid "" "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"我们现在已经为不同的打印材料添加了自动校准功能，该功能是完全自动化的，并且结" -"果将保存在打印机中以供将来使用。您只需要在以下有限情况下进行校准：\n" -"1. 如果您引入了不同品牌/型号的新打印材料，或者打印材料受潮；\n" -"2. 如果喷嘴磨损或更换了新的喷嘴；\n" -"3. 如果您在打印材料设置中更改了最大体积速度或打印温度。" msgid "About this calibration" msgstr "关于此校准" @@ -13742,12 +16837,12 @@ msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" "使用流量动态校准后，仍可能出现一些挤出问题，例如：\n" "1. 过度挤出：打印物体上有过多的材料，形成凸起或小球，或者层次看起来比预期的厚" @@ -13835,20 +16930,12 @@ msgid "" "the Name" msgstr "*我们建议您在名称中添加品牌、材料、类型，甚至湿度水平。" -msgid "Failed" -msgstr "失败" - msgid "Please enter the name you want to save to printer." msgstr "请输入要保存到打印机的名称。" msgid "The name cannot exceed 40 characters." msgstr "名称不能超过40个字符。" -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "相同名称的结果只会保存一个。您确定要覆盖其他结果吗？" - msgid "Please find the best line on your plate" msgstr "请在您的打印板上找到最佳线条" @@ -13861,9 +16948,6 @@ msgstr "输入值" msgid "Save to Filament Preset" msgstr "保存到材料预设" -msgid "Preset" -msgstr "预设" - msgid "Record Factor" msgstr "记录系数" @@ -13898,9 +16982,6 @@ msgstr "跳过校准2" msgid "flow ratio : %s " msgstr "流量比：%s " -msgid "Please choose a block with smoothest top surface" -msgstr "请选择顶部表面最光滑的块" - msgid "Please choose a block with smoothest top surface." msgstr "请选择顶部表面最光滑的块。" @@ -13927,22 +17008,37 @@ msgstr "将打印一份测试模型。在校准之前，请清理打印平台并 msgid "Printing Parameters" msgstr "打印参数" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "热床类型" msgid "filament position" msgstr "耗材丝位置" -msgid "External Spool" -msgstr "外部线轴" - msgid "Filament For Calibration" msgstr "校准用耗材" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "校准材料提示：\n" "-可以共享相同热床温度的材料\n" @@ -13961,9 +17057,23 @@ msgstr "%s 与 %s 不兼容" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "不支持TPU进行流量动态自动校准。" +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" + msgid "Connecting to printer" msgstr "正在连接打印机" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." +msgstr "" + msgid "From k Value" msgstr "起始k值" @@ -13982,6 +17092,9 @@ msgstr "从体积速度" msgid "To Volumetric Speed" msgstr "至体积速度" +msgid "Are you sure you want to cancel this print?" +msgstr "你确定要取消这次打印吗？" + msgid "Flow Dynamics Calibration Result" msgstr "动态流量校准结果" @@ -14007,6 +17120,13 @@ msgstr "该机型每个喷嘴最多只能保存%d个历史结果" msgid "Edit Flow Dynamics Calibration" msgstr "编辑动态流量校准" +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" + msgid "New Flow Dynamic Calibration" msgstr "新建动态流量校准" @@ -14016,6 +17136,12 @@ msgstr "确认" msgid "The filament must be selected." msgstr "请选择材料" +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." +msgstr "" + msgid "Network lookup" msgstr "搜索网络" @@ -14051,15 +17177,12 @@ msgstr "" msgid "PA Calibration" msgstr "PA校准" -msgid "DDE" -msgstr "近程挤出机" - -msgid "Bowden" -msgstr "远程挤出机" - msgid "Extruder type" msgstr "挤出机类型" +msgid "DDE" +msgstr "近程挤出机" + msgid "PA Tower" msgstr "PA塔" @@ -14078,14 +17201,32 @@ msgstr "结束值" msgid "PA step: " msgstr "步距" +msgid "Accelerations: " +msgstr "加速度： " + +msgid "Speeds: " +msgstr "速度： " + msgid "Print numbers" msgstr "打印数字" +msgid "Comma-separated list of printing accelerations" +msgstr "逗号分隔的打印加速度列表" + +msgid "Comma-separated list of printing speeds" +msgstr "逗号分隔的打印速度列表" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" + msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "请输入有效值：\n" "起始PA: >= 0.0\n" @@ -14095,6 +17236,9 @@ msgstr "" msgid "Temperature calibration" msgstr "温度校准" +msgid "Filament type" +msgstr "耗材类型" + msgid "PLA" msgstr "PLA" @@ -14116,9 +17260,6 @@ msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" -msgid "Filament type" -msgstr "耗材类型" - msgid "Start temp: " msgstr "起始温度: " @@ -14128,16 +17269,15 @@ msgstr "结束温度" msgid "Temp step: " msgstr "温度步距" +msgid "Wiki Guide: Temperature Calibration" +msgstr "" + msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"请输入有效值：\n" -"起始温度：<= 350\n" -"结束温度：>= 170\n" -"起始温度 > 结束温度 + 5）" msgid "Max volumetric speed test" msgstr "最大体积流量速度测试" @@ -14148,14 +17288,14 @@ msgstr "起始流量" msgid "End volumetric speed: " msgstr "结束流量" -msgid "step: " -msgstr "步距" +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "请输入有效值：\n" "起始 > 0\n" @@ -14171,11 +17311,14 @@ msgstr "起始速度" msgid "End speed: " msgstr "结束速度" +msgid "Wiki Guide: VFA" +msgstr "" + msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "请输入有效值：\n" "开始 > 10\n" @@ -14188,10 +17331,131 @@ msgstr "起始回抽长度" msgid "End retraction length: " msgstr "结束回抽长度" -msgid "mm/mm" +msgid "Wiki Guide: Retraction Calibration" msgstr "" -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "输入整形频率测试" + +msgid "Test model" +msgstr "测试模型" + +msgid "Ringing Tower" +msgstr "振铃塔" + +msgid "Fast Tower" +msgstr "快速塔" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "开始 / 结束" + +msgid "Frequency settings" +msgstr "频率设置" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "阻尼： " + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "请输入有效的阻尼因子（0 < 阻尼/ζ因子 <= 1）" + +msgid "Input shaping Damp test" +msgstr "输入整形阻尼测试" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "频率" + +msgid "Damp" +msgstr "阻尼" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "注意：使用先前计算的频率。" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "将G-Code发送到打印机" msgid "Upload to Printer Host with the following filename:" @@ -14200,9 +17464,6 @@ msgstr "使用下列文件名上传到打印机：" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "如有需要，请使用正斜杠（ / ）作为目录分隔符。" -msgid "Please do not include the special characters #, *, and ;in filenames." -msgstr "请不要在文件名中包含特殊字符 #, *, 和 ;。" - msgid "Upload to storage" msgstr "上传到存储单位" @@ -14210,9 +17471,6 @@ msgid "Switch to Device tab after upload." msgstr "上传后跳转到设备页。" #, c-format, boost-format -msgid "The filename '%s' contains special characters (#, *, or ;) which may cause issues.Do you wish to continue?" -msgstr "上传文件名\"%s\"有“#，*，；”特殊字符。您是否要继续？" - msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "上传文件名不以\"%s\"结尾。您是否要继续？" @@ -14244,18 +17502,35 @@ msgstr "取消选中" msgid "Show error message" msgstr "显示错误信息" -msgid "Enqueued" +msgid "Queued" msgstr "已加入队列" msgid "Uploading" msgstr "正在上传" -msgid "Cancelling" +msgid "Canceling" msgstr "取消中" msgid "Error uploading to print host" msgstr "上传到打印机时错误" +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "" + +msgid "Time-lapse" +msgstr "延时摄影" + +msgid "Heated Bed Leveling" +msgstr "热床调平" + +msgid "Textured Build Plate (Side A)" +msgstr "纹理构建板（A面）" + +msgid "Smooth Build Plate (Side B)" +msgstr "光滑构建板（B面）" + msgid "Unable to perform boolean operation on selected parts" msgstr "无法对所选部件执行布尔运算" @@ -14308,7 +17583,7 @@ msgid "Export Log" msgstr "输出日志" msgid "Snapmaker Orca Version:" -msgstr "Snapmaker Orca版本：" +msgstr "逆戟鲸版本：" msgid "System Version:" msgstr "系统版本：" @@ -14316,13 +17591,13 @@ msgstr "系统版本：" msgid "DNS Server:" msgstr "DNS服务：" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "测试Snapmaker Orca项目网站(GitHub)" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "测试逆戟鲸项目网站(GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "测试Snapmaker Orca项目网站(GitHub)" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "测试逆戟鲸项目网站(GitHub)" -msgid "Test Bing.com" +msgid "Test bing.com" msgstr "测试 Bing.com" msgid "Test bing.com:" @@ -14386,13 +17661,13 @@ msgid "Custom vendor is not input, please input custom vendor." msgstr "未输入自定义供应商，请输入自定义供应商。" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "“Bambu”或者“Generic”不能用于自定义材料的厂商" msgid "Filament type is not selected, please reselect type." msgstr "未选择材料类型，请重新选择。" -msgid "Filament serial is not inputed, please input serial." +msgid "Filament serial is not entered, please enter serial." msgstr "未输入材料系列，请输入材料系列。" msgid "" @@ -14403,7 +17678,7 @@ msgstr "材料的供应商或系列输入中可能包含转义字符。请删除 msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "自定义供应商或系列中的所有输入都是空格。请重新输入。" -msgid "The vendor can not be a number. Please re-enter." +msgid "The vendor cannot be a number. Please re-enter." msgstr "自定义供应商不能是数字。请重新输入。" msgid "" @@ -14412,7 +17687,7 @@ msgstr "您还没有选择打印机或预设。请至少选择一个。" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" @@ -14431,8 +17706,8 @@ msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" "我们将会把预设重命名为“供应商类型名 @ 您选择的打印机”\n" "如果您希望为更多打印机添加预设，请前往打印机选择页面" @@ -14458,21 +17733,27 @@ msgstr "导入预设" msgid "Create Type" msgstr "创建类型" -msgid "The model is not found, place reselect vendor." +msgid "The model was not found, please reselect vendor." msgstr "该模型未找到，请重新选择供应商。" -msgid "Select Model" -msgstr "选择型号" - msgid "Select Printer" msgstr "选择打印机" +msgid "Select Model" +msgstr "选择型号" + msgid "Input Custom Model" msgstr "输入自定义型号" msgid "Can't find my printer model" msgstr "不能找到我的打印机模型" +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" +msgstr "" + msgid "Rectangle" msgstr "矩形" @@ -14482,15 +17763,9 @@ msgstr "可打印形状" msgid "Hot Bed STL" msgstr "热床STL模型" -msgid "Load stl" -msgstr "加载stl" - msgid "Hot Bed SVG" msgstr "热床SVG图片" -msgid "Load svg" -msgstr "加载svg" - msgid "Max Print Height" msgstr "最大打印高度" @@ -14501,16 +17776,16 @@ msgstr "文件超过 %d MB，请重新导入。" msgid "Exception in obtaining file size, please import again." msgstr "获取文件大小异常，请重新导入。" -msgid "Preset path is not find, please reselect vendor." +msgid "Preset path was not found, please reselect vendor." msgstr "预设路径未找到，请重新选择供应商。" msgid "The printer model was not found, please reselect." msgstr "未找到打印机型号，请重新选择。" -msgid "The nozzle diameter is not found, place reselect." +msgid "The nozzle diameter was not found, please reselect." msgstr "未找到喷嘴直径，请重新选择。" -msgid "The printer preset is not found, place reselect." +msgid "The printer preset was not found, please reselect." msgstr "打印机预设未找到，请重新选择。" msgid "Printer Preset" @@ -14525,9 +17800,6 @@ msgstr "全部取消选中" msgid "Process Preset Template" msgstr "工艺预设模板" -msgid "Back Page 1" -msgstr "返回第一页" - msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" @@ -14538,9 +17810,6 @@ msgid "" "page. Please check before creating it." msgstr "您在第一页的可打印区域部分输入了非法输入。请检查后再创建。" -msgid "The custom printer or model is not inputed, place input." -msgstr "自定义打印机或型号未输入，请输入。" - msgid "" "The printer preset you created already has a preset with the same name. Do " "you want to overwrite it?\n" @@ -14567,14 +17836,14 @@ msgstr "创建材料预设失败。如下：\n" msgid "Create process presets failed. As follows:\n" msgstr "创建工艺预设失败。如下：\n" -msgid "Vendor is not find, please reselect." +msgid "Vendor was not found, please reselect." msgstr "供应商未找到，请重新选择。" msgid "Current vendor has no models, please reselect." msgstr "当前的供应商没有模型，请重新选择。" msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." msgstr "您还没有选择供应商和模型，或者没有输入自定义供应商和模型。" @@ -14594,10 +17863,18 @@ msgid "" "You have not yet selected the printer to replace the nozzle, please choose." msgstr "您尚未选择要更换喷嘴的打印机，请进行选择。" -msgid "Create Printer Successful" +msgid "The entered nozzle diameter is invalid, please re-enter:\n" +msgstr "" + +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." +msgstr "" + +msgid "Printer Created Successfully" msgstr "创建打印机成功" -msgid "Create Filament Successful" +msgid "Filament Created Successfully" msgstr "创建材料成功" msgid "Printer Created" @@ -14623,7 +17900,7 @@ msgid "" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" @@ -14678,15 +17955,22 @@ msgstr "" "当前目录中已存在名为 '%s' 的文件夹。您要清除它并重新构建吗？\n" "如果不清除，将会在文件夹名后添加时间后缀，您可以在创建后进行修改。" +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." +msgstr "" + +msgid "" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "打印机和属于打印机的所有的材料和工艺预设。\n" "能与他人分享。" msgid "" -"User's fillment preset set. \n" +"User's filament preset set.\n" "Can be shared with others." msgstr "" "用户材料预设集。\n" @@ -14744,7 +18028,7 @@ msgid "" msgstr "" "注意：如果在该材料下仅有的预设被删除，那么在退出对话框后该材料将被删除。" -msgid "Presets inherited by other presets can not be deleted" +msgid "Presets inherited by other presets cannot be deleted" msgstr "被其他预设继承的预设不能被删除。" msgid "The following presets inherits this preset." @@ -14754,6 +18038,14 @@ msgstr[0] "以下预设继承此预设。" msgid "Delete Preset" msgstr "删除预设" +msgid "" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"确定要删除所选预设吗？\n" +"如果预设对应当前在您的打印机上使用的材料，请重新设置该槽位的材料信息。" + msgid "Are you sure to delete the selected preset?" msgstr "你确定要删除所选预设？" @@ -14763,11 +18055,8 @@ msgstr "删除预设" msgid "+ Add Preset" msgstr "+ 添加预设" -msgid "Delete Filament" -msgstr "删除材料" - msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" @@ -14805,17 +18094,34 @@ msgid "Daily Tips" msgstr "每日贴士" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "记忆中的喷嘴：%.1f %s" - -msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" -msgstr "预设中的喷嘴直径与记忆的喷嘴直径不一致。您最近更换了喷嘴吗？" +msgid "nozzle size in preset: %d" +msgstr "" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*使用 %s 材料和 %s 打印可能会导致喷嘴损坏" +msgid "nozzle size memorized: %d" +msgstr "" + +msgid "" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." +msgstr "" msgid "Need select printer" msgstr "需要选择打印机" @@ -14823,6 +18129,35 @@ msgstr "需要选择打印机" msgid "The start, end or step is not valid value." msgstr "起始、结束或者步长输入值无效。" +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" @@ -14843,9 +18178,6 @@ msgstr "成功！" msgid "Are you sure to log out?" msgstr "您确定要登出吗？" -msgid "Refresh Printers" -msgstr "刷新打印机" - msgid "View print host webui in Device tab" msgstr "在设备标签页中，查看打印机主机的WebUI" @@ -14875,7 +18207,7 @@ msgid "" msgstr "要使用自定义 CA 文件，请将您的 CA 文件导入到证书存储 / 密钥链中。" msgid "Login/Test" -msgstr "" +msgstr "登录/测试" msgid "Connection to printers connected via the print host failed." msgstr "连接到通过打印主机连接的打印机失败。" @@ -14884,22 +18216,22 @@ msgstr "连接到通过打印主机连接的打印机失败。" msgid "Mismatched type of print host: %s" msgstr "打印主机的类型不匹配：%s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "与 AstroBox 的连接正常。" msgid "Could not connect to AstroBox" msgstr "无法连接到 AstroBox。" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "请注意，需要至少 AstroBox 版本 1.1.0。" -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "成功连接到 Duet 控制器。" msgid "Could not connect to Duet" msgstr "无法连接到 Duet 控制器。" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "发生了未知错误。" msgid "Wrong password" @@ -14911,7 +18243,7 @@ msgstr "无法获取资源以创建新连接。" msgid "Upload not enabled on FlashAir card." msgstr "FlashAir卡未启用上传。" -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "FlashAir连接正常，并启用了上传。" msgid "Could not connect to FlashAir" @@ -14922,28 +18254,28 @@ msgid "" "is required." msgstr "需要 FlashAir 固件版本为 2.00.02 或更高，并激活上传功能。" -msgid "Connection to MKS works correctly." +msgid "Connection to MKS is working correctly." msgstr "MKS的连接正常。" msgid "Could not connect to MKS" msgstr "无法连接到MKS。" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "成功连接到 OctoPrint。" msgid "Could not connect to OctoPrint" msgstr "无法连接到OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "注意：至少需要 OctoPrint 版本 1.1.0。" -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "与 Prusa SL1 / SL1S 的连接正常。" msgid "Could not connect to Prusa SLA" msgstr "无法连接到 Prusa SLA。" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "连接到 PrusaLink 的连接正常。" msgid "Could not connect to PrusaLink" @@ -14967,19 +18299,19 @@ msgstr "%1%：没有可用空间" msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "上载失败。在%1%找不到合适的存储。" -msgid "Connection to Prusa Connect works correctly." +msgid "Connection to Prusa Connect is working correctly." msgstr "与Prusa Connect的连接工作正常。" msgid "Could not connect to Prusa Connect" msgstr "无法连接到Prusa connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "与 Repetier 的连接正常。" msgid "Could not connect to Repetier" msgstr "无法连接到Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "注意：需要 Repetier 版本至少为 0.90.0。" #, boost-format @@ -15007,101 +18339,96 @@ msgid "" msgstr "主机打印机的枚举失败。消息体：\"%1%\"错误：\"%2%\"" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" "0.2 mm 喷嘴的默认参数，层高小，层纹不明显，打印质量高，适合大部分常规打印场" "景。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" "此为高质量参数，相比于此喷嘴的默认参数，打印速度、加速度较低，稀疏填充图案为" "螺旋体，打印质量更高，但耗时更长。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "相比于此喷嘴的默认参数，层高较大，层纹不明显，打印耗时稍短。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "相比于此喷嘴的默认参数，层高较大，层纹稍显现，打印耗时较短。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" -"相比于此喷嘴的默认参数，层高较小，几乎不显层纹，打印质量较高，但打印耗时较" -"长。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" "此为高质量参数，相比于此喷嘴的默认参数，层高较小，打印速度、加速度较低，稀疏" "填充图案为螺旋体，几乎不显层纹，打印质量非常高，但打印耗时很长。" msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" -"相比于此喷嘴的默认参数，层高较小，几乎不显层纹，打印质量较高，但打印耗时较" -"长。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" "此为高质量参数，相比于此喷嘴的默认参数，层高较小，打印速度、加速度较低，稀疏" "填充图案为螺旋体，几乎不显层纹，打印质量非常高，但打印耗时很长。" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" "0.4 mm 喷嘴的默认参数，层高常规，层纹一般，打印质量常规，适合大部分常规打印场" "景。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "此为强度参数，相比于此喷嘴的默认参数，墙层数较大，稀疏填充密度较高，打印件的" "强度更高，但耗材用量更大，耗时更长。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" "相比于此喷嘴的默认参数，层高较大，层纹较明显，打印质量较低，部分模型的打印耗" "时稍短。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" "相比于此喷嘴的默认参数，层高较大，层纹较明显，打印质量较低，部分模型的打印耗" "时较短。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹较不明显，打印质量较高，但打印耗时较" "长。" @@ -15109,16 +18436,16 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" "此为高质量参数，相比于此喷嘴的默认参数，层高较小，打印速度、加速度较低，稀疏" "填充图案为螺旋体，层纹较不明显，打印质量较高，但打印耗时很长。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹更不明显，打印质量较高，但打印耗时较" "长。" @@ -15126,104 +18453,402 @@ msgstr "" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" "此为高质量参数，相比于此喷嘴的默认参数，层高较小，打印速度、加速度较低，稀疏" "填充图案为螺旋体，层纹更不明显，打印质量很高，但打印耗时很长。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹更不明显，打印质量较高，但打印耗时较" "长。" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." msgstr "" "0.6 mm 喷嘴的默认参数，层高较大，层纹明显，打印质量一般，打印耗时一般。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" "此为强度参数，相比于此喷嘴的默认参数，墙层数较大，稀疏填充密度较高，打印件的" "强度更高，但耗材用量更大，耗时更长。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" "相比于此喷嘴的默认参数，层高较大，层纹较明显，打印质量较低，部分模型的打印耗" "时较短。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" "相比于此喷嘴的默认参数，层高较大，层纹很明显，打印质量较低，部分模型的打印耗" "时较短。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹较不明显，打印质量稍微较高，部分模型的" "打印耗时较长。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹较不明显，打印质量较高，部分模型的打印" "耗时较长。" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" -"0.8 mm 喷嘴的默认参数，层高较大，层纹很明显，打印质量低，打印耗时一般。" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" -"相比于此喷嘴的默认参数，层高更大，层纹非常明显，打印质量较低，部分模型的打印" -"耗时较短。" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" -"相比于此喷嘴的默认参数，层高较大，层纹非常明显，打印质量较低，部分模型的打印" -"耗时较短。" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" "相比于此喷嘴的默认参数，层高较小，层纹较不明显，打印质量稍微较高，部分模型的" "打印耗时较长。" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "没有AMS" + +msgid "There is no device available to send printing." +msgstr "没有可用于发送打印的设备。" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "同时使用的打印机数量不能等于0。" + +msgid "Use External Spool" +msgstr "使用外挂料卷" + +msgid "Select Printers" +msgstr "选择打印机" + +msgid "Device Name" +msgstr "设备名" + +msgid "Device Status" +msgstr "设备状态" + +msgid "AMS Status" +msgstr "AMS状态" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "请在此处选择您想管理的设备（最多6个设备）。" + +msgid "Printing Options" +msgstr "打印选项" + +msgid "Bed Leveling" +msgstr "热床调平" + +msgid "Flow Dynamic Calibration" +msgstr "动态流量校准" + +msgid "Send Options" +msgstr "发送选项" + +msgid "Send to" +msgstr "发送至" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "打印机在同一时间。（这取决于有多少设备可以接受同时加热。）" + +msgid "Wait" +msgstr "等待" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "分钟发送一次。（这取决于完成加热需要多长时间。）" + +msgid "Task Sending" +msgstr "正在发送的任务" + +msgid "Task Sent" +msgstr "已发送的任务" + +msgid "Edit multiple printers" +msgstr "编辑多个打印机" + +msgid "Select connected printers (0/6)" +msgstr "选择已连接的打印机 (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "选择已连接的打印机 (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "可以选择的打印机数量最多为 %d。" + +msgid "No task" +msgstr "没有任务" + +msgid "Edit Printers" +msgstr "编辑打印机" + +msgid "Task Name" +msgstr "任务名" + +msgid "Actions" +msgstr "动作" + +msgid "Task Status" +msgstr "任务状态" + +msgid "Sent Time" +msgstr "发送时间" + +msgid "There are no tasks to be sent!" +msgstr "没有任务正在发送！" + +msgid "No historical tasks!" +msgstr "没有历史任务！" + +msgid "Upgrading" +msgstr "升级中" + +msgid "syncing" +msgstr "同步中" + +msgid "Printing Finish" +msgstr "打印成功" + +msgid "Printing Failed" +msgstr "打印失败" + +msgid "Printing Pause" +msgstr "打印暂停" + +msgid "Pending" +msgstr "等待中" + +msgid "Sending" +msgstr "发送中" + +msgid "Sending Finish" +msgstr "发送成功" + +msgid "Sending Cancel" +msgstr "取消发送" + +msgid "Sending Failed" +msgstr "发送失败" + +msgid "Print Success" +msgstr "打印成功" + +msgid "Print Failed" +msgstr "打印失败" + +msgid "Removed" +msgstr "移除" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" -"相比于此喷嘴的默认参数，层高较小，层纹较不明显，打印质量较高，部分模型的打印" -"耗时较长。" msgid "Connected to Obico successfully!" msgstr "已成功连接到Obico" @@ -15246,11 +18871,11 @@ msgstr "未知错误" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "尚未连接到SimplyPrint账户，前往连接选项来进行配置。" -msgid "Connection to Flashforge works correctly." -msgstr "与Flashforge的连接工作正常。" +msgid "Serial connection to Flashforge is working correctly." +msgstr "Flashforge串口连接工作正常。" -msgid "Could not connect to Flashforge" -msgstr "无法连接至Flashforge" +msgid "Could not connect to Flashforge via serial" +msgstr "无法通过串口连接Flashforge" msgid "The provided state is not correct." msgstr "提供的状态不正确。" @@ -15261,23 +18886,111 @@ msgstr "在您为此应用程序进行授权时，请允许所需的权限。" msgid "Something unexpected happened when trying to log in, please try again." msgstr "在尝试登录时发生了异常，请重试。" -msgid "User cancelled." +msgid "User canceled." msgstr "用户已取消。" -msgid "Nozzle Bind" -msgstr "喷嘴信息绑定" +msgid "Head diameter" +msgstr "Brim 直径" -msgid "The target machine model has been detected as" -msgstr "检测目标机型为" +msgid "Max angle" +msgstr "最大角度" -msgid "Please bind the nozzle information" -msgstr "请绑定喷嘴信息" +msgid "Detection radius" +msgstr "检测半径" -msgid "Machine Disconnected" -msgstr "设备断联" +msgid "Remove selected points" +msgstr "删除已选择的点" -msgid "Connection has been disconnected and recovery attempt failed. Please reconnect." -msgstr "设备已断联，且尝试重连失败，请尝试重新连接" +msgid "Remove all" +msgstr "删除所有点" + +msgid "Auto-generate points" +msgstr "自动生成点" + +msgid "Add a brim ear" +msgstr "加入一个耳状Brim" + +msgid "Delete a brim ear" +msgstr "删除一个耳状Brim" + +msgid "Adjust head diameter" +msgstr "调整喷头直径" + +msgid "Adjust section view" +msgstr "调整剖面视图" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "警告：Brim类型未设置为绘制模式，耳状Brim将不会生效！" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "将此对象的边缘类型设置为\"绘制\"" + +msgid " invalid brim ears" +msgstr "个无效耳状帽檐" + +msgid "Brim Ears" +msgstr "耳状帽檐" + +msgid "Please select single object." +msgstr "请选中单个对象。" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" +msgstr "" #: resources/data/hints.ini: [hint:Precise wall] msgid "" @@ -15354,7 +19067,7 @@ msgstr "" msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" "如何使用键盘快捷键\n" "您知道吗？Snapmaker Orca提供了广泛的键盘快捷键和3D场景操作。" @@ -15397,7 +19110,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "自动摆盘\n" "您知道吗？您可以自动排列项目中的所有对象。" @@ -15406,7 +19119,7 @@ msgstr "" msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "自动朝向\n" "您知道吗，您只需单击鼠标，即可将对象旋转到适合的打印方向。" @@ -15439,7 +19152,7 @@ msgid "" "Slicer setting?" msgstr "" "搜索功能\n" -"您知道吗？您可以使用搜索工具快速查找特定的Snapmaker Orca设置。" +"您知道吗？您可以使用搜索工具快速查找特定的逆戟鲸设置。" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -15478,7 +19191,7 @@ msgid "" msgstr "" "减去一个部分\n" "您知道吗，您可以使用负零件修改器从一个网格中减去另一个网格。这样，您就可以直" -"接在Snapmaker Orca中创建易于调整大小的孔。" +"接在逆戟鲸中创建易于调整大小的孔。" #: resources/data/hints.ini: [hint:STEP] msgid "" @@ -15490,7 +19203,7 @@ msgid "" msgstr "" "STEP文件\n" "您知道吗，通过切片STEP文件而不是STL文件可以提高打印质量。\n" -"Snapmaker Orca支持切片STEP文件，提供比低分辨率STL更平滑的结果。试试看！" +"逆戟鲸支持切片STEP文件，提供比低分辨率STL更平滑的结果。试试看！" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -15571,7 +19284,7 @@ msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" "使用Brim\n" @@ -15581,7 +19294,7 @@ msgstr "" msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "为多个对象设置参数\n" "您知道吗，可以同时为所有选定对象设置切片参数。" @@ -15597,8 +19310,8 @@ msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "冲刷到支持/对象/填充中\n" "你知道吗？你可以在换料时将它们冲入支撑/对象/填充，以节省浪费的料丝。" @@ -15612,822 +19325,612 @@ msgstr "" "提高强度\n" "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" -"什么时候需要打开机箱门打印\n" -"您知道吗？在较高腔温下打印低温耗材，打开机箱门可以减少挤出机/热端堵塞的概率。" -"有关此的更多信息，请参阅Wiki。" +"什么时候需要打开打印机门进行打印？\n" +"您知道吗，在较高封闭仓温度下打印较低温度的耗材时，打开打印机门可以减少挤出机/" +"热端堵塞的概率。更多信息请参阅Wiki。" #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" -#~ msgid "V" -#~ msgstr "V" - -#~ msgid "Export &Configs" -#~ msgstr "导出预设" - -#~ msgid "Infill direction" -#~ msgstr "填充方向" - -#~ msgid "" -#~ "Enable this to get a G-code file which has G2 and G3 moves. And the " -#~ "fitting tolerance is same with resolution" -#~ msgstr "" -#~ "启用此设置，导出的G-code将包含G2 G3指令。圆弧拟合的容许值和精度相同。" - -#~ msgid "" -#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " -#~ "The percentage value is relative to line width of sparse infill" -#~ msgstr "" -#~ "填充区域被轻微扩大，并和外墙产生重叠，进而产生更好的粘接。表示为相对稀疏填" -#~ "充的线宽的百分比。" - -#~ msgid "Export Configs" -#~ msgstr "导出预设" - -#~ msgid "Unload Filament" -#~ msgstr "退料" - -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "选择1个AMS槽位，然后点击进料/退料按钮以自动进料/退料。" - -#~ msgid "MainBoard" -#~ msgstr "主板" - -#~ msgid "active" -#~ msgstr "活动的" - -#~ msgid "Jump to layer" -#~ msgstr "跳转到层" - -#~ msgid "Cabin humidity" -#~ msgstr "舱内湿度" - -#~ msgid "" -#~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" -#~ msgstr "" -#~ "绿色表示 AMS 湿度正常，橙色表示湿度高，红色表示湿度过高。(湿度计：越低越" -#~ "好。)" - -#~ msgid "Desiccant status" -#~ msgstr "干燥剂状态" - -#~ msgid "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" -#~ msgstr "" -#~ "干燥剂状态低于两格表示干燥剂可能不活跃。请更换干燥剂。(杠：越高越好)。" - -#~ msgid "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." -#~ msgstr "" -#~ "注意：当盖子打开或更换干燥剂包装时，可能需要数小时或一晚才能吸收水分，低温" -#~ "也会减慢这一过程。在此期间，指示器的数值可能并不准确。" - -#~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing is completed." -#~ msgstr "" -#~ "注意：如果是在打印过程中插入新的耗材丝，AMS会在打印结束后自动读取此耗材丝" -#~ "信息。" - -#, boost-format -#~ msgid "Succeed to export G-code to %1%" -#~ msgstr "成功导出G-code至 %1%" - -#~ msgid "Initialize failed (No Device)!" -#~ msgstr "初始化失败（没有设备）！" - -#~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "初始化失败（没有摄像头）" - -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." -#~ msgstr "打印机正忙于下载，请等待下载完成。" - -#~ msgid "Initialize failed (Not supported on the current printer version)!" -#~ msgstr "初始化失败（当前打印机的版本不支持）！" - -#~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "初始化失败（在局域网模式中不可访问）！" - -#~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "初始化失败（未找到打印机的局域网地址）！" +#~ msgid "Junction Deviation calibration" +#~ msgstr "结点偏差校准" #, c-format, boost-format -#~ msgid "Stopped [%d]!" -#~ msgstr "已停止 [%d]!" +#~ msgid "Extruder %d" +#~ msgstr "挤出机 %d" + +#~ msgid "" +#~ "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +#~ "Firmware)" +#~ msgstr "最大结点偏差（M205 J，仅适用于Marlin固件的JD > 0时）" + +#~ msgid "Adaptive layer height" +#~ msgstr "自适应层高" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "启用此选项将自动计算（除第一层外）树状支撑的层高。" + +#~ msgid "Junction Deviation test" +#~ msgstr "结点偏差测试" + +#~ msgid "Start junction deviation: " +#~ msgstr "起始结点偏差： " + +#~ msgid "End junction deviation: " +#~ msgstr "结束结点偏差： " + +#~ msgid "Junction Deviation settings" +#~ msgstr "结点偏差设置" + +#~ msgid "Note: Lower values = sharper corners but slower speeds" +#~ msgstr "注意：较低值 = 更尖锐的拐角但速度更慢" + +#~ msgid "NOTE: High values may cause Layer shift" +#~ msgstr "注意：高值可能导致层偏移" + +#~ msgid "AMS not connected" +#~ msgstr "AMS 未连接" + +#~ msgid "Ext Spool" +#~ msgstr "外挂料卷" + +#~ msgid "Guide" +#~ msgstr "引导" + +#~ msgid "Calibrating AMS..." +#~ msgstr "正在校准AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "校准过程遇到问题。点击查看解决方案。" + +#~ msgid "Calibrate again" +#~ msgstr "重新校准" + +#~ msgid "Cancel calibration" +#~ msgstr "取消校准" + +#~ msgid "Feed Filament" +#~ msgstr "送料" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "需要插入SD卡后方可发送局域网打印" + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "需要插入SD卡后方可发送到打印机。" + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "仅允许选择放入同种材质耗材丝的AMS槽位" + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "如果AMS中有两卷相同的耗材，则自动补给启用。\n" +#~ "（目前支持品牌、材料种类、颜色相同的耗材的自动补给）" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS读取Bambu Lab耗材丝信息同时推算料卷的剩余容量。在打印过程中，剩余容量会" +#~ "自动更新。" + +#~ msgid "" +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "建议最低温度低于190°C或建议最高温度高于300°C。\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." +#~ msgstr "" +#~ "旋转模式只能在外墙层数为1，关闭支撑，顶层层数为0，稀疏填充密度为0，传统延" +#~ "时摄影时有效。" + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "扫描XY轴机械模态" + +#~ msgid "Paused due to filament runout" +#~ msgstr "断料暂停" + +#~ msgid "Heating hotend" +#~ msgstr "加热热端" + +#~ msgid "Calibrating extrusion" +#~ msgstr "标定挤出补偿" + +#~ msgid "Printing was paused by the user" +#~ msgstr "用户暂停" + +#~ msgid "Pause of front cover falling" +#~ msgstr "工具头前盖掉落暂停" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "挤出绝对流量标定" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "热端温控异常暂停" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "热床温控异常暂停" + +#~ msgid "Skip step pause" +#~ msgstr "丢步暂停" + +#~ msgid "Motor noise calibration" +#~ msgstr "电机噪声校准" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "暂停，由于AMS丢失" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "暂停，由于散热风扇转速低" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "暂停，由于仓温控制错误" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "暂停，由于用户插入的Gcode" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "裹头暂停" + +#~ msgid "Cutter error pause" +#~ msgstr "切刀异常暂停" + +#~ msgid "First layer error pause" +#~ msgstr "首层扫描异常暂停" + +#~ msgid "Nozzle clog pause" +#~ msgstr "堵头暂停" + +#~ msgid "Fatal" +#~ msgstr "致命" + +#~ msgid "Serious" +#~ msgstr "严重" + +#~ msgid "Common" +#~ msgstr "普通" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "当前仓温或目标仓温超过45℃为了避免挤出机堵塞，低温耗材（PLA/PETG/TPU）不允" +#~ "许被装入。" + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "低温耗材（PLA/PETG/TPU）被装入挤出机中。为了避免挤出机堵塞，不允许将仓温设" +#~ "置在45℃以上" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "AMS不支持Bambu PET-CF/PA6-CF。" + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "对象被放置在构建板的边界上或超过高度限制。\n" +#~ "请通过将其完全移动到构建板内或构建板外，并确认高度在构建空间以内来解决问" +#~ "题。" + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "你可以在打印机“设置->网络->连接->访问码\"\n" +#~ "查看，如下图所示：" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "当前固件暂不支持查看SD卡中文件。请更新打印机固件后重试。" + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "" +#~ "请检查打印机中SD卡是否已经插入，如果仍然不能读取，您可尝试格式化SD卡。" + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "局域网模式下暂不支持查看SD卡内文件。" + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "存储不可用，请插入SD卡。" + +#~ msgid "Cham" +#~ msgstr "机箱" + +#~ msgid "Still unload" +#~ msgstr "继续退料" + +#~ msgid "Still load" +#~ msgstr "继续进料" + +#~ msgid "Can't start this without SD card." +#~ msgstr "没有SD卡无法开始任务" + +#~ msgid "Update" +#~ msgstr "固件更新" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "暂停的灵敏度为" #, c-format, boost-format -#~ msgid "Load failed [%d]!" -#~ msgstr "加载失败 [%d]！" +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "没有发现AMS材料。请在“设备”页面选择打印机，将加载 AMS 信息" + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "同步到 AMS 的材料列表将丢弃所有当前配置的材料预设、颜色。是否继续？" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "已经同步过，你希望仅同步改变的材料还是重新同步所有材料？" + +#~ msgid "Sync" +#~ msgstr "同步" + +#~ msgid "Resync" +#~ msgstr "重新同步" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "有一些未知型号的材料，映射到通用预设。请更新或者重启 Snapmaker Orca，以检查系" +#~ "统预设有没有更新。" + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "您确定要将原始SVG文件与其本地路径存储到3MF文件中吗？\n" +#~ "如果选择“否”，项目中的所有SVG文件将不再可编辑。" + +#~ msgid "Private protection" +#~ msgstr "隐私保护" + +#~ msgid "General Settings" +#~ msgstr "通用设置" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "启动后显示“每日小贴士”通知" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "如果启用，将在启动时显示有用的提示。" + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "冲刷体积：每一次更换颜色时自动计算。" + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "如果启用，会在每一次更换颜色时自动计算。" + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "冲刷体积：每一次更换材料时自动计算。" + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "如果启用，会在每一次更换材料时自动计算。" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "对象克隆后自动排列打印板" + +#~ msgid "Network" +#~ msgstr "网络" + +#~ msgid "User Sync" +#~ msgstr "用户同步" + +#~ msgid "System Sync" +#~ msgstr "系统同步" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "将URL关联到Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "每" + +#~ msgid "Downloads" +#~ msgstr "下载" + +#~ msgid "Dark Mode" +#~ msgstr "深色模式" + +#~ msgid "Home page and daily tips" +#~ msgstr "首页和每日小贴士" + +#~ msgid "Show home page on startup" +#~ msgstr "启动时显示主页" + +#~ msgid "Please choose the filament color" +#~ msgstr "请选择材料颜色" + +#~ msgid "Send print job to" +#~ msgstr "发送打印任务至" #, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "文件列表为空[%d]" +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "材料编号%s超出AMS槽位数量，请更新打印机固件以支持AMS槽位映射功能" + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "材料编号超出AMS槽位数量，请更新打印机固件以支持AMS槽位映射功能" + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "已自动建立 \"耗材丝列表=>AMS槽位\" 的映射关系。 可点击上方具体的耗材丝手动" +#~ "设置其所对应的AMS槽位" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "请在发送打印前点击上方各个耗材丝，指定其所对应的AMS槽位" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "已自动建立 \"耗材丝列表=>AMS槽位\" 的映射关系。 可点击上方具体的耗材丝手动" +#~ "设置其所对应的AMS槽位" + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "请在发起打印前插入SD卡" + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "开启延迟摄影功能需要插入SD卡" #, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "加载失败 [%d]" +#~ msgid "nozzle in preset: %.1f %s" +#~ msgstr "预设中的喷嘴：%.1f %s" -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "无法从打印机获取模型信息。" - -#~ msgid "Failed to parse model infomations." -#~ msgstr "解析模型信息失败。" - -#~ msgid "Connection lost. Please retry." -#~ msgstr "连接丢失。请重试。" - -#~ msgid "File not exists." -#~ msgstr "文件不存在" - -#, boost-format -#~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "您已经更改了预设 \"%1%\"，是否在切换后要保留这些更改的预设参数？" +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "记忆中的喷嘴：%.1f %s" #~ msgid "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "您已经更改了预设参数，是否在切换后要保留这些更改的预设参数？" - -#~ msgid "" -#~ "Please go to filament setting to edit your presets if you need.\n" -#~ "Please note that nozzle temperature, hot bed temperature, and maximum " -#~ "volumetric speed have a significant impact on printing quality. Please " -#~ "set them carefully." +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." #~ msgstr "" -#~ "如果需要，请转到灯丝设置以编辑您的预设。\n" -#~ "请注意喷嘴温度、热床温度和最大体积流量对打印质量有重大影响。请小心设置它" -#~ "们。" +#~ "切片文件中的喷嘴直径与记忆的喷嘴不一致。如果您最近更换了喷嘴，请前往设备 " +#~ "> 打印机零件进行更改设置。" -#~ msgid "Studio Version:" -#~ msgstr "Studio 版本：" - -#~ msgid "Test BambuLab" -#~ msgstr "测试 BambuLab" - -#~ msgid "Test BambuLab:" -#~ msgstr "测试 BambuLab：" - -#~ msgid "Test HTTP" -#~ msgstr "测试 HTTP" - -#~ msgid "Test HTTP Service:" -#~ msgstr "测试 HTTP 服务：" - -#~ msgid "Test storage" -#~ msgstr "测试存储" - -#~ msgid "Test Storage Upload:" -#~ msgstr "测试存储上传：" - -#~ msgid "Test storage upgrade" -#~ msgstr "测试存储升级" - -#~ msgid "Test Storage Upgrade:" -#~ msgstr "测试存储升级：" - -#~ msgid "Test storage download" -#~ msgstr "测试存储下载" - -#~ msgid "Test Storage Download:" -#~ msgstr "测试存储下载：" - -#~ msgid "Test plugin download" -#~ msgstr "测试插件下载" - -#~ msgid "Test Plugin Download:" -#~ msgstr "测试插件下载:" - -#~ msgid "Test Storage Upload" -#~ msgstr "测试存储上传" +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "用%s打印高温材料（%s材料）可能会导致喷嘴损坏" #~ msgid "" -#~ "The speed setting exceeds the printer's maximum speed " -#~ "(machine_max_speed_x/machine_max_speed_y).\n" -#~ "Orca will automatically cap the print speed to ensure it doesn't surpass " -#~ "the printer's capabilities.\n" -#~ "You can adjust the maximum speed setting in your printer's configuration " -#~ "to get higher speeds." +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "正在连接打印机。连接过程中无法取消。" + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "小心使用！纹理PEI板上的流量校准可能会因表面散射而失败。" + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "使用微型激光雷达进行自动流量校准" + +#~ msgid "Send to Printer SD card" +#~ msgstr "发送到打印机的SD卡" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "发送到打印机需要插入SD卡" + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "该打印机不支持发送到打印机SD卡。" + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "颜色数量范围应该是[%d, %d]。" + +#~ msgid "Current filament colors:" +#~ msgstr "当前耗材丝颜色:" + +#~ msgid "Quick set:" +#~ msgstr "快捷设置:" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "近似的颜色匹配。" + +#~ msgid "Cluster colors" +#~ msgstr "重置匹配的耗材丝" + +#~ msgid "Map Filament" +#~ msgstr "匹配耗材丝" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." #~ msgstr "" -#~ "速度设置超过了打印机的最大速度（machine_max_speed_x/" -#~ "machine_max_speed_y）。\n" -#~ "Orca将自动限制打印速度，以确保不超过打印机的速度限制。\n" -#~ "您可以调整打印机配置中的最大速度设置，以获得更高的速度。" +#~ "注意：颜色已经选好了，您可以选中确认 \n" +#~ " 继续或手动修改它。" #~ msgid "" -#~ "The travel acceleration setting exceeds the printer's maximum " -#~ "acceleration (machine_max_acceleration_travel).\n" -#~ "Orca will automatically cap the acceleration speed to ensure it doesn't " -#~ "surpass the printer's capabilities.\n" -#~ "You can adjust the machine_max_acceleration_travel value in your " -#~ "printer's configuration to get higher speeds." +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." #~ msgstr "" -#~ "空驶加速度设置超过了打印机的最大空驶加速度" -#~ "（machine_max_acceleration_travel）。\n" -#~ "Orca将自动限制加速度，以确保不超过打印机的速度限制。\n" -#~ "您可以调整打印机配置中的machine_max_acceleration_travel值，以获得更高的速" -#~ "度。" +#~ "警告：新增追加耗材丝数量 \n" +#~ " 和已有耗材丝数量超过了16." + +#~ msgid "Auto-Calc" +#~ msgstr "自动计算" #~ msgid "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)" -#~ msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca 将会在每一次更换耗材颜色时重新计算你的冲刷体积， 你可以在 Orca " +#~ "Slicer > 偏好设置 中关闭自动计算" -#~ msgid " " -#~ msgstr " " +#~ msgid "unloaded" +#~ msgstr "卸载" -#~ msgid "Text-Rotate" -#~ msgstr "旋转文字" +#~ msgid "loaded" +#~ msgstr "装载" -#~ msgid "Configuration package updated to " -#~ msgstr "配置包已更新到" +#~ msgid "Filament #" +#~ msgstr "耗材丝#" + +#~ msgid "From" +#~ msgstr "从" + +#~ msgid "To" +#~ msgstr "到" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "继续打印（缺陷可接受）" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "继续打印（问题已解决）" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "步骤1. 请确认 Snapmaker Orca 和您的打印机在同一局域网中。" + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "步骤2，如果下面的IP和访问代码与打印机上的实际值不同，请重新输入。" + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "步骤3，请从打印机端获取设备序列号，它通常位于打印机屏幕上的设备信息中。" + +#~ msgid "Laser 10 W" +#~ msgstr "激光10W" + +#~ msgid "Laser 40 W" +#~ msgstr "激光40W" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "离其它对象太近，打印时可能会发生碰撞。" + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "不能将温度差异过大的材料一起打印。否则挤出机和喷嘴在打印中可能被堵塞或损坏" + +#~ msgid "Ironing angle" +#~ msgstr "熨烫角度" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "熨烫的角度。设为负值将禁用此功能并使用默认方法。" + +#~ msgid "Remove small overhangs" +#~ msgstr "移除小悬空" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "移除可能并不需要支撑的小悬空。" + +#~ msgid "Width of the brim." +#~ msgstr "边缘宽度。" + +#~ msgid "" +#~ "Only one of the results with the same name will be saved. Are you sure " +#~ "you want to overwrite the other results?" +#~ msgstr "相同名称的结果只会保存一个。您确定要覆盖其他结果吗？" + +#~ msgid "External Spool" +#~ msgstr "外部线轴" + +#~ msgid "" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" +#~ msgstr "" +#~ "请输入有效值：\n" +#~ "起始温度：<= 350\n" +#~ "结束温度：>= 170\n" +#~ "起始温度 > 结束温度 + 5）" + +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "自定义打印机或型号未输入，请输入。" + +#~ msgid "BigTraffic" +#~ msgstr "大流量" + +#, c-format, boost-format +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "预设中的喷嘴：%s %s" + +#~ msgid "" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "预设中的喷嘴直径与记忆的喷嘴直径不一致。您最近更换了喷嘴吗？" + +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*使用 %s 材料和 %s 打印可能会导致喷嘴损坏" #~ msgid "" #~ "Improve shell precision by adjusting outer wall spacing. This also " #~ "improves layer consistency." #~ msgstr "优化外墙刀路以提高外墙精度。这个优化同时减少层纹" -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "无稀疏层（实验）" - #~ msgid "" -#~ "We would rename the presets as \"Vendor Type Serial @printer you selected" -#~ "\". \n" -#~ "To add preset for more prinetrs, Please go to printer selection" +#~ "Infill patterns are typically designed to handle旋转 automatically to " +#~ "ensure proper printing and achieve their intended effects (e.g., Gyroid, " +#~ "Cubic). Rotating the current sparse infill pattern may lead to " +#~ "insufficient support. Please proceed with caution and thoroughly check " +#~ "for any potential printing issues.Are you sure you want to enable this " +#~ "option?" #~ msgstr "" -#~ "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" -#~ "要为更多的打印机添加预设，请前往打印机选择。" - -#~ msgid "The Config can not be loaded." -#~ msgstr "配置无法加载。" - -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "该3mf文件来自旧版本的Snapmaker Orca，将只加载几何数据。" - -#~ msgid "Movement:" -#~ msgstr "移动：" - -#~ msgid "Movement" -#~ msgstr "移动" - -#~ msgid "Auto Segment" -#~ msgstr "自动分割" - -#~ msgid "Depth ratio" -#~ msgstr "深度" - -#~ msgid "Prizm" -#~ msgstr "棱柱" - -#~ msgid "connector is out of cut contour" -#~ msgstr "个连接件超出了切割面范围" - -#~ msgid "connectors are out of cut contour" -#~ msgstr "个连接件超出了切割面范围" - -#~ msgid "connector is out of object" -#~ msgstr "个连接件穿透了模型" - -#~ msgid "connectors is out of object" -#~ msgstr "个连接件穿透了模型" - -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "无效状态。\n" -#~ "切割后没有选中要保留的部分" - -#~ msgid "Edit Text" -#~ msgstr "编辑文字" - -#~ msgid "Error! Unable to create thread!" -#~ msgstr "发生错误，无法创建线程。" - -#~ msgid "Exception" -#~ msgstr "异常" - -#~ msgid "Choose SLA archive:" -#~ msgstr "选择SLA存档：" - -#~ msgid "Import file" -#~ msgstr "导入文件" - -#~ msgid "Import model and profile" -#~ msgstr "导入模型和配置" - -#~ msgid "Import profile only" -#~ msgstr "仅导入配置" - -#~ msgid "Import model only" -#~ msgstr "仅导入模型" - -#~ msgid "Accurate" -#~ msgstr "精确的" - -#~ msgid "Balanced" -#~ msgstr "均衡的" - -#~ msgid "Quick" -#~ msgstr "快速的" - -#~ msgid "" -#~ "Discribe how long the nozzle will move along the last path when retracting" -#~ msgstr "表示回抽时擦拭的移动距离。" - -#~ msgid "" -#~ "Simplify Model\n" -#~ "Did you know that you can reduce the number of triangles in a mesh using " -#~ "the Simplify mesh feature? Right-click the model and select Simplify " -#~ "model. Read more in the documentation." -#~ msgstr "" -#~ "简化模型\n" -#~ "您知道吗，您可以使用“简化模型”功能减少模型的三角形数。在模型上单击鼠标右" -#~ "键，然后选择“简化模型”。" - -#~ msgid "" -#~ "Subtract a Part\n" -#~ "Did you know that you can subtract one mesh from another using the " -#~ "Negative part modifier? That way you can, for example, create easily " -#~ "resizable holes directly in Snapmaker Orca. Read more in the documentation." -#~ msgstr "" -#~ "减去部分几何体\n" -#~ "您知道吗，您可以使用负零件从另一个几何体中减去另一个几何体。例如，可以直接" -#~ "在Snapmaker Orca中创建可轻松调整大小的孔。" - -#~ msgid "Filling bed " -#~ msgstr "填充热床" - -#, boost-format -#~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "%1% 填充图案不支持 100%% 密度。" - -#~ msgid "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - switch to rectilinear pattern automaticlly\n" -#~ "No - reset density to default non 100% value automaticlly" -#~ msgstr "" -#~ "切换到直线图案？\n" -#~ "是 - 自动切换到直线图案\n" -#~ "否 - 自动将密度重置为默认的非100%值" - -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "请在进料前把喷嘴升温到170℃" - -#~ msgid "Show g-code window" -#~ msgstr "显示g-code窗口" - -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "如果启用，将显示g-code窗口。" - -#, c-format -#~ msgid "Density of internal sparse infill, 100% means solid throughout" -#~ msgstr "稀疏填充密度, 100%% 意味着完全实心。" - -#~ msgid "Tree support wall loops" -#~ msgstr "树状支撑外墙层数" - -#~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "树状支撑外墙层数" - -#, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " 填充图案不支持 100%% 密度" - -#~ msgid "Tool-Lay on Face" -#~ msgstr "工具-选择底面" - -#~ msgid "Export as STL" -#~ msgstr "导出为 STL" - -#~ msgid "Check cloud service status" -#~ msgstr "检查云服务状态" - -#~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "请输入有效的数值（K的范围为0~0.5)" - -#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" -#~ msgstr "请输入有效的数值 (K的范围为0~0.5, N的范围为0.6~2.0）" - -#~ msgid "Export all objects as STL" -#~ msgstr "导出所有对象为STL" - -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "该3mf文件与软件不兼容，将只加载几何数据。" - -#~ msgid "Incompatible 3mf" -#~ msgstr "不兼容的3mf" - -#~ msgid "Add/Remove printers" -#~ msgstr "添加/删除打印机" - -#~ msgid "" -#~ "When print by object, machines with I3 structure will not generate " -#~ "timelapse videos." -#~ msgstr "当逐件打印时，I3结构的机器将不会生成延时摄影。" - -#, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "%s 不受AMS支持。" - -#~ msgid "Don't remind me of this version again" -#~ msgstr "此版本不再提示" - -#~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "错误：IP或访问码不正确" - -#~ msgid "" -#~ "Extrude perimeters that have a part over an overhang in the reverse " -#~ "direction on odd layers. This alternating pattern can drastically improve " -#~ "steep overhang." -#~ msgstr "" -#~ "在奇数层，将悬垂的打印方向反转。这种交替的模式可以大大改善陡峭悬垂的打印质" -#~ "量。" - -#~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "内墙/外墙/填充的顺序" - -#~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "内圈墙/外圈墙/填充的打印顺序" - -#~ msgid "inner/outer/infill" -#~ msgstr "内墙/外墙/填充" - -#~ msgid "outer/inner/infill" -#~ msgstr "外墙/内墙/填充" - -#~ msgid "infill/inner/outer" -#~ msgstr "填充/内墙/外墙" - -#~ msgid "infill/outer/inner" -#~ msgstr "填充/外墙/内墙" - -#~ msgid "inner-outer-inner/infill" -#~ msgstr "内墙/外墙/内墙/填充" - -#~ msgid "Export 3MF" -#~ msgstr "导出3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "导出项目为3MF。" - -#~ msgid "Export slicing data" -#~ msgstr "导出切片数据" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "导出切片数据到目录" - -#~ msgid "Load slicing data" -#~ msgstr "导入切片数据" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "从目录导入缓存的切片数据" - -#~ msgid "Export STL" -#~ msgstr "导出STL文件" - -#~ msgid "Export the objects as multiple STL." -#~ msgstr "将对象导出为多个STL文件" - -#~ msgid "Slice" -#~ msgstr "切片" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "切片平台：0-所有平台，i-第i个平台，其他-无效" - -#~ msgid "Show command help." -#~ msgstr "显示命令行帮助。" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "将3mf的配置值更新为最新值。" - -#~ msgid "Load default filaments" -#~ msgstr "加载默认打印材料" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "加载第一个打印材料为默认材料" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "切片时每个盘的最大三角形数。" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "每个盘的最大切片时间（秒）。" - -#~ msgid "Normative check" -#~ msgstr "规范性检查" - -#~ msgid "Check the normative items." -#~ msgstr "检查规范性项目。" - -#~ msgid "Output Model Info" -#~ msgstr "输出模型信息" - -#~ msgid "Output the model's information." -#~ msgstr "输出模型的信息。" - -#~ msgid "Export Settings" -#~ msgstr "导出配置" - -#~ msgid "Export settings to a file." -#~ msgstr "导出配置到文件。" - -#~ msgid "Send progress to pipe" -#~ msgstr "将进度发送到管道" - -#~ msgid "Send progress to pipe." -#~ msgstr "将进度发送到管道。" - -#~ msgid "Arrange Options" -#~ msgstr "摆放选项" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "摆放选项：0-关闭，1-开启，其他-自动" - -#~ msgid "Repetions count" -#~ msgstr "重复次数" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "整个模型的重复次数" - -#~ msgid "Convert Unit" -#~ msgstr "转换单位" - -#~ msgid "Convert the units of model" -#~ msgstr "转换模型的单位" - -#~ msgid "Rotate around X" -#~ msgstr "绕X旋转" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "绕X轴的旋转角度（以度为单位）。" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "根据因子缩放模型" - -#~ msgid "Load General Settings" -#~ msgstr "加载通用设置" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "从指定文件加载工艺/打印机设置" - -#~ msgid "Load Filament Settings" -#~ msgstr "加载耗材丝设置" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "从指定文件加载耗材丝设置" - -#~ msgid "Skip Objects" -#~ msgstr "零件跳过" - -#~ msgid "Skip some objects in this print" -#~ msgstr "打印过程中跳过一些零件" - -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "在使用最新设置时加载最新的进程/机器设置" - -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "在使用最新设置时，从指定的文件中加载最新的进程/机器设置。" - -#~ msgid "Output directory" -#~ msgstr "输出路径" - -#~ msgid "Output directory for the exported files." -#~ msgstr "导出文件的输出路径。" - -#~ msgid "Debug level" -#~ msgstr "调试等级" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" -#~ msgstr "" -#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， 5:" -#~ "trace\n" - -#, boost-format -#~ msgid "The selected preset: %1% is not found." -#~ msgstr "未找到选定的预设：%1%。" - -#~ msgid "" -#~ "3D Scene Operations\n" -#~ "Did you know how to control view and object/part selection with mouse and " -#~ "touchpanel in the 3D scene?" -#~ msgstr "" -#~ "3D场景操作\n" -#~ "如何在3D场景中使用鼠标和触摸面板进行视角控制和对象/部件选择" - -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "修复模型\n" -#~ "您知道吗？您可以修复一个损坏的3D模型以避免诸多切片问题。" - -#~ msgid "Embeded" -#~ msgstr "嵌入的" - -#~ msgid "" -#~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." -#~ msgstr "" -#~ "Snapmaker Orca 配置文件可能已损坏而无法解析。请删除此文件并重新启动" -#~ "Snapmaker Orca。" - -#~ msgid "Online Models" -#~ msgstr "在线模型" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "在主页上显示工作人员挑选的在线模型" - -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "自动冷却降速的最小打印速度" - -#~ msgid "" -#~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" -#~ "(Currently supporting automatic supply of consumables with the same " -#~ "brand, material type, and color)" -#~ msgstr "" -#~ "当前无相同的备用耗材，暂时无法自动补给。\n" -#~ "（目前支持品牌、材料种类、颜色相同的耗材的自动补给）" - -#~ msgid "Invalid nozzle diameter" -#~ msgstr "非法喷嘴口径" - -#~ msgid "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clog." -#~ msgstr "热床温度超过了材料的软化温度。请在打印前打开打印机前门以防堵头。" - -#~ msgid "Activate for better air filtration" -#~ msgstr "激活以获得更好的空气过滤" - -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "软化温度" - -#~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" -#~ msgstr "材料在这个温度开始变软。因此热床温度不能超过这个温度。" - -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "如果机器有辅助部件冷却风扇，勾选该选项" - -#~ msgid "" -#~ "This option is enabled if machine support controlling chamber temperature" -#~ msgstr "如果机器支持仓温控制，则启用此选项" - -#~ msgid "Enable this if printer support air filtration" -#~ msgstr "如果打印机支持空气过滤，则启用此功能" - -#~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" -#~ msgstr "" -#~ "辅助部件冷却风扇的转速。辅助部件冷却风扇将一直运行在该速度，除了设置的无需" -#~ "冷却的前若干层" - -#~ msgid "" -#~ "Filter out gaps smaller than the threshold specified. This setting won't " -#~ "affect top/bottom layers" -#~ msgstr "小于指定阈值的微小间隙不填充。本设置不会对顶/底层起作用" - -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "底部出现空层，已被最近的正常层替换。" - -#~ msgid "The model has too many empty layers." -#~ msgstr "模型有太多空层。" - -#~ msgid "Cali" -#~ msgstr "标定" - -#~ msgid "Calibration of extrusion" -#~ msgstr "挤出标定" - -#~ msgid "Push new filament into the extruder" -#~ msgstr "将新的耗材丝推入挤出机" - -#, c-format, boost-format -#~ msgid "" -#~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" -#~ msgstr "" -#~ "其它层的热床温度比首层热床温度低太多，超过了%d 摄氏度。\n" -#~ "这可能导致打印中模型从热床脱落" - -#~ msgid "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blocked and printing failure\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed" -#~ msgstr "" -#~ "热床温度超过了耗材丝的软化温度，材料软化可能造成喷头堵塞。\n" -#~ "请保持打印机在打印过程中敞开，保证空气流通或降低热床温度" - -#~ msgid "Total Time Estimation" -#~ msgstr "总时间预估" - -#~ msgid "Resonance frequency identification" -#~ msgstr "共振频率辨识" - -#~ msgid "Immediately score" -#~ msgstr "立即打分" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "请为您喜欢的 Bambu 商城模型打分。" - -#~ msgid "Score" -#~ msgstr "打分" - -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "高温打印热床" - -#~ msgid "Can't connect to the printer" -#~ msgstr "无法连接打印机" - -#~ msgid "Recommended temperature range" -#~ msgstr "建议温度范围" - -#~ msgid "High Temp Plate" -#~ msgstr "高温打印热床" - -#~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" -#~ msgstr "安装高温打印热床时的热床温度。0值表示这个耗材丝不支持高温打印热床" - -#~ msgid "Internal bridge support thickness" -#~ msgstr "内部桥接支撑厚度" - -#~ msgid "" -#~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " -#~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" -#~ msgstr "" -#~ "如果开启，Snapmaker Orca会沿着内部桥接的边沿在其下方生成支撑轮廓。这些支撑轮廓" -#~ "可以防止悬空地打印内部桥接并提高顶面质量，特别是在填充密度较低的情况下。这" -#~ "个设置用于调整支撑轮廓的厚度，0表示关闭此特性。" - -#~ msgid "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." -#~ msgstr "" -#~ "支撑物的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳" -#~ "定的支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n" -#~ "对于树形支撑，苗条板的风格将更积极地合并树枝，并节省大量的材料（默认），而" -#~ "混合风格将在大的平面悬垂下创建与正常支撑类似的结构。" - -#~ msgid "Target chamber temperature" -#~ msgstr "目标腔体温度" - -#~ msgid "Bed temperature difference" -#~ msgstr "热床温差" - -#~ msgid "" -#~ "Do not recommend bed temperature of other layer to be lower than initial " -#~ "layer for more than this threshold. Too low bed temperature of other " -#~ "layer may cause the model broken free from build plate" -#~ msgstr "" -#~ "不建议其它层热床温度比首层的热床温度低于这个值。太低的其它层热床温度可能导" -#~ "致打印过程中模型从打印板脱落。" - -#~ msgid "Orient the model" -#~ msgstr "旋转模型" +#~ "填充图案通常被设计为自动处理旋转以确保正确打印并达到预期效果（例如，螺旋" +#~ "体、立方体）。旋转当前的稀疏填充图案可能导致支撑不足。请谨慎操作并彻底检查" +#~ "任何潜在的打印问题。您确定要启用此选项吗？" \ No newline at end of file diff --git a/localization/i18n/zh_TW/Snapmaker_Orca_zh_TW.po b/localization/i18n/zh_TW/Snapmaker_Orca_zh_TW.po index 6e71954452..bbc4912de7 100644 --- a/localization/i18n/zh_TW/Snapmaker_Orca_zh_TW.po +++ b/localization/i18n/zh_TW/Snapmaker_Orca_zh_TW.po @@ -1,28 +1,136 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. +# REVISED lin-ycv , 2024. +# REVISED Shuwn Hsu, 2024. +# REVISED Enfeng Tsao, 2025. # msgid "" msgstr "" "Project-Id-Version: Snapmaker Orca\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-30 15:44+0200\n" -"PO-Revision-Date: 2023-11-06 14:37+0800\n" -"Last-Translator: ablegods \n" +"POT-Creation-Date: 2025-11-05 17:33+0800\n" +"PO-Revision-Date: 2025-03-27 19:32+0800\n" +"Last-Translator: 5idereal \n" "Language-Team: \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 3.4.1\n" +"X-Generator: Poedit 3.5\n" -#, fuzzy -msgid "Supports Painting" -msgstr "自訂支撐" +msgid "" +"The filament may not be compatible with the current machine settings. " +"Generic filament presets will be used." +msgstr "" -msgid "Alt + Mouse wheel" -msgstr "Alt + 滑鼠滾輪" +msgid "" +"The filament model is unknown. Still using the previous filament preset." +msgstr "" + +msgid "The filament model is unknown. Generic filament presets will be used." +msgstr "" + +msgid "" +"The filament may not be compatible with the current machine settings. A " +"random filament preset will be used." +msgstr "" + +msgid "The filament model is unknown. A random filament preset will be used." +msgstr "" + +msgid "right" +msgstr "" + +msgid "left" +msgstr "" + +msgid "right extruder" +msgstr "" + +msgid "left extruder" +msgstr "" + +msgid "extruder" +msgstr "" + +msgid "TPU is not supported by AMS." +msgstr "AMS 不支援 TPU 線材。" + +msgid "" +"Damp PVA will become flexible and get stuck inside AMS, please take care to " +"dry it before use." +msgstr "潮濕的 PVA 會變得柔軟並黏在 AMS 內，請在使用前注意乾燥。" + +msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." +msgstr "" + +msgid "" +"The rough surface of PLA Glow can accelerate wear on the AMS system, " +"particularly on the internal components of the AMS Lite." +msgstr "" + +msgid "" +"CF/GF filaments are hard and brittle, it's easy to break or get stuck in " +"AMS, please use with caution." +msgstr "含 CF/GF 線材又硬又脆，在 AMS 中很容易斷裂或卡住，請謹慎使用。" + +msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." +msgstr "" + +#, c-format, boost-format +msgid "%s is not supported by %s extruder." +msgstr "" + +msgid "Current AMS humidity" +msgstr "目前 AMS 濕度" + +msgid "Humidity" +msgstr "濕度" + +msgid "Temperature" +msgstr "溫度" + +msgid "Left Time" +msgstr "剩餘時間" + +msgid "Drying" +msgstr "烘乾" + +msgid "Idle" +msgstr "閒置" + +#, c-format, boost-format +msgid "%d ℃" +msgstr "" + +msgid "Serial:" +msgstr "序號：" + +msgid "Version:" +msgstr "版本：" + +msgid "Latest version" +msgstr "最新版本" + +msgid "Support Painting" +msgstr "支撐筆刷" + +msgid "Ctrl+" +msgstr "Ctrl+" + +msgid "Alt+" +msgstr "" + +msgid "Shift+" +msgstr "Shift+" + +msgid "Mouse wheel" +msgstr "滑鼠滾輪" msgid "Section view" msgstr "剖面圖" @@ -30,39 +138,27 @@ msgstr "剖面圖" msgid "Reset direction" msgstr "重置方向" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + 滑鼠滾輪" - -#, fuzzy msgid "Pen size" msgstr "筆刷尺寸" msgid "Left mouse button" msgstr "滑鼠左鍵" -#, fuzzy msgid "Enforce supports" msgstr "新增支撐區" msgid "Right mouse button" msgstr "滑鼠右鍵" -#, fuzzy msgid "Block supports" msgstr "不產生支撐區" -msgid "Shift + Left mouse button" -msgstr "Shift + 滑鼠左鍵" - -#, fuzzy msgid "Erase" msgstr "擦除" -#, fuzzy msgid "Erase all painting" -msgstr "擦除所有手繪支撐" +msgstr "擦除所有自訂支撐" -#, fuzzy msgid "Highlight overhang areas" msgstr "突顯出懸空區域" @@ -75,7 +171,6 @@ msgstr "套用" msgid "Gap area" msgstr "間隙面積" -#, fuzzy msgid "Tool type" msgstr "筆刷類型" @@ -88,13 +183,11 @@ msgstr "僅對懸空區生效" msgid "Auto support threshold angle: " msgstr "自動支撐角度臨界值：" -#, fuzzy msgid "Circle" msgstr "圓形" -#, fuzzy msgid "Sphere" -msgstr "球形" +msgstr "球體" msgid "Fill" msgstr "填充" @@ -104,11 +197,10 @@ msgstr "縫隙填充" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "僅允許在由以下條件選擇的平面上進行繪製：%1%" +msgstr "僅允許在由以下條件選擇的平面上進行繪製：「%1%」" -#, fuzzy msgid "Highlight faces according to overhang angle." -msgstr "根據懸空角度突出顯示面。" +msgstr "根據懸空角度突顯出表面。" msgid "No auto support" msgstr "無自動支撐" @@ -124,31 +216,27 @@ msgstr "選擇底面" #, boost-format msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " +"Filament count exceeds the maximum number that painting tool supports. Only " "the first %1% filaments will be available in painting tool." msgstr "線材數量超過上色工具支援的最大值，僅前 %1% 個線材可在上色工具中使用。" -#, fuzzy msgid "Color Painting" -msgstr "自訂顏色" +msgstr "上色" -#, fuzzy msgid "Pen shape" msgstr "筆刷形狀" msgid "Paint" msgstr "繪製" -#, fuzzy msgid "Key 1~9" msgstr "按鍵 1～9" msgid "Choose filament" msgstr "選擇線材" -#, fuzzy msgid "Edge detection" -msgstr "邊緣偵測" +msgstr "偵測邊緣" msgid "Triangles" msgstr "三角形" @@ -156,7 +244,6 @@ msgstr "三角形" msgid "Filaments" msgstr "線材" -#, fuzzy msgid "Brush" msgstr "筆刷" @@ -169,12 +256,21 @@ msgstr "批次填充" msgid "Height range" msgstr "高度範圍" -msgid "Alt + Shift + Enter" +msgid "Enter" msgstr "" msgid "Toggle Wireframe" msgstr "顯示/隱藏線框" +msgid "Remap filaments" +msgstr "重新配置列印線材" + +msgid "Remap" +msgstr "重新配置" + +msgid "Cancel" +msgstr "取消" + msgid "Shortcut Key " msgstr "快捷鍵 " @@ -193,13 +289,37 @@ msgstr "水平" msgid "Remove painted color" msgstr "移除已繪製的顏色" -#, fuzzy, boost-format +#, boost-format msgid "Painted using: Filament %1%" -msgstr "使用：線材 %1% 上色" +msgstr "上色：線材 %1%" + +msgid "Filament remapping finished." +msgstr "" + +msgid "Paint-on fuzzy skin" +msgstr "塗刷絨毛表面效果" + +msgid "Brush size" +msgstr "筆刷尺寸" + +msgid "Brush shape" +msgstr "筆刷形狀" + +msgid "Add fuzzy skin" +msgstr "" + +msgid "Remove fuzzy skin" +msgstr "" + +msgid "Reset selection" +msgstr "" msgid "Move" msgstr "移動" +msgid "Please select at least one object." +msgstr "請選擇至少一個物件。" + msgid "Gizmo-Move" msgstr "Gizmo-移動" @@ -230,19 +350,24 @@ msgstr "在" msgid "mm" msgstr "mm" +msgid "Part selection" +msgstr "選擇零件" + +msgid "Fixed step drag" +msgstr "以固定間距拖曳" + +msgid "Single sided scaling" +msgstr "單側縮放" + msgid "Position" msgstr "位置" -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "旋轉" +msgid "Rotate (relative)" +msgstr "旋轉（相對）" msgid "Scale ratios" msgstr "縮放比例" -#, fuzzy msgid "Object Operations" msgstr "物件操作" @@ -255,53 +380,57 @@ msgstr "平移" msgid "Group Operations" msgstr "群組操作" -msgid "Set Position" -msgstr "設定位置" - msgid "Set Orientation" msgstr "設定方向" msgid "Set Scale" msgstr "設定縮放" -#, fuzzy msgid "Reset Position" msgstr "重設位置" -#, fuzzy msgid "Reset Rotation" msgstr "重設旋轉" -msgid "World coordinates" -msgstr "世界坐標" - msgid "Object coordinates" +msgstr "物件座標" + +msgid "World coordinates" +msgstr "世界座標" + +msgid "Translate(Relative)" msgstr "" -msgid "°" -msgstr "°" +msgid "Reset current rotation to the value when open the rotation tool." +msgstr "重設旋轉角度為開啟旋轉工具時的狀態。" + +msgid "Rotate (absolute)" +msgstr "旋轉（絕對）" + +msgid "Reset current rotation to real zeros." +msgstr "將旋轉角度歸零" + +msgid "Part coordinates" +msgstr "零件座標" #. TRN - Input label. Be short as possible msgid "Size" msgstr "尺寸" -msgid "%" -msgstr "%" - msgid "uniform scale" msgstr "等比例縮放" msgid "Planar" -msgstr "" +msgstr "平面" msgid "Dovetail" -msgstr "" +msgstr "鳩尾榫" msgid "Auto" msgstr "自動" msgid "Manual" -msgstr "" +msgstr "手動" msgid "Plug" msgstr "插銷" @@ -310,13 +439,13 @@ msgid "Dowel" msgstr "銷釘" msgid "Snap" -msgstr "" +msgstr "卡扣" msgid "Prism" -msgstr "" +msgstr "錐體" msgid "Frustum" -msgstr "錐體" +msgstr "截頭圓錐" msgid "Square" msgstr "正方形" @@ -325,14 +454,13 @@ msgid "Hexagon" msgstr "六邊形" msgid "Keep orientation" -msgstr "" +msgstr "保持方向" -#, fuzzy msgid "Place on cut" -msgstr "切割面放置到列印板上" +msgstr "切割面貼其於列印底板" msgid "Flip upside down" -msgstr "" +msgstr "倒轉" msgid "Connectors" msgstr "連接件" @@ -350,19 +478,25 @@ msgstr "形狀" #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" -msgstr "" +msgstr "深度" + +#. TRN - Input label. Be short as possible +#. Angle between Y axis and text line direction. +#. TRN - Input label. Be short as possible +msgid "Rotation" +msgstr "旋轉" msgid "Groove" -msgstr "溝槽" +msgstr "凹槽" msgid "Width" msgstr "寬度" msgid "Flap Angle" -msgstr "" +msgstr "翼偏角" msgid "Groove Angle" -msgstr "" +msgstr "凹槽角" msgid "Part" msgstr "零件" @@ -374,21 +508,26 @@ msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" +"點擊翻轉切割面\n" +"拖曳移動切割面" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" +"點擊翻轉切割平面\n" +"拖曳移動切割平面\n" +"右鍵點擊部件以將其分配到對側" msgid "Move cut plane" -msgstr "" +msgstr "移動切割面" msgid "Mode" msgstr "模式" msgid "Change cut mode" -msgstr "" +msgstr "變更切割模式" msgid "Tolerance" msgstr "公差" @@ -397,7 +536,7 @@ msgid "Drag" msgstr "拖拉" msgid "Draw cut line" -msgstr "" +msgstr "畫切割線" msgid "Left click" msgstr "滑鼠左鍵" @@ -423,55 +562,51 @@ msgstr "取消選擇連接件" msgid "Select all connectors" msgstr "選擇所有連接件" -#, fuzzy msgid "Cut" msgstr "切割" msgid "Rotate cut plane" -msgstr "" +msgstr "旋轉切割面" msgid "Remove connectors" msgstr "刪除所有連接件" msgid "Bulge" -msgstr "" +msgstr "凸起" msgid "Bulge proportion related to radius" -msgstr "" +msgstr "與半徑相關的凸起比例" msgid "Space" msgstr "空格鍵" msgid "Space proportion related to radius" -msgstr "" +msgstr "與半徑相關的空間佔比" msgid "Confirm connectors" msgstr "確認" -msgid "Cancel" -msgstr "取消" - msgid "Build Volume" -msgstr "" +msgstr "列印體積" msgid "Flip cut plane" -msgstr "" +msgstr "翻轉切割面" msgid "Groove change" -msgstr "" +msgstr "凹槽調整" msgid "Reset" msgstr "重設" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" -msgstr "" +msgstr "編輯" msgid "Cut position" -msgstr "" +msgstr "切割位置" msgid "Reset cutting plane" -msgstr "" +msgstr "重設切割面" msgid "Edit connectors" msgstr "編輯連接件" @@ -480,10 +615,10 @@ msgid "Add connectors" msgstr "新增連接件" msgid "Reset cut" -msgstr "" +msgstr "重設切割" msgid "Reset cutting plane and remove connectors" -msgstr "" +msgstr "重設切割面且移除連接件" msgid "Upper part" msgstr "上半部分" @@ -491,7 +626,6 @@ msgstr "上半部分" msgid "Lower part" msgstr "下半部分" -#, fuzzy msgid "Keep" msgstr "保留" @@ -516,24 +650,24 @@ msgstr "偵測到無效連接件" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "" +msgstr[0] "有 %1$d 個連接件超出切割範圍" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" -msgstr[0] "" +msgstr[0] "有 %1$d 個連接件不在物體範圍內" msgid "Some connectors are overlapped" msgstr "存在連接件相互重疊" msgid "Select at least one object to keep after cutting." -msgstr "" +msgstr "切割後保留至少一個物件。" msgid "Cut plane is placed out of object" -msgstr "" +msgstr "切割面在物件外" msgid "Cut plane with groove is invalid" -msgstr "" +msgstr "帶有凹槽的切割平面無效" msgid "Connector" msgstr "連接件" @@ -542,19 +676,19 @@ msgid "Cut by Plane" msgstr "用平面分割" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "" +msgstr "切科後產生非流形邊，是否要修復？" msgid "Repairing model object" msgstr "修復模型物件" msgid "Cut by line" -msgstr "" +msgstr "用線切割" msgid "Delete connector" -msgstr "" +msgstr "刪除連接件" msgid "Mesh name" -msgstr "Mesh名" +msgstr "Mesh 名稱" msgid "Detail level" msgstr "細節等級" @@ -562,7 +696,7 @@ msgstr "細節等級" msgid "Decimate ratio" msgstr "簡化率" -#, fuzzy, boost-format +#, boost-format msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommended to simplify the model." @@ -602,14 +736,10 @@ msgstr "%d 個三角形" msgid "Show wireframe" msgstr "顯示線框" -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." +msgid "Can't apply when processing preview." msgstr "處理預覽的過程中無法套用。" -msgid "Operation already cancelling. Please wait few seconds." +msgid "Operation already cancelling. Please wait a few seconds." msgstr "操作已在取消中，請稍後。" msgid "Face recognition" @@ -618,42 +748,31 @@ msgstr "外觀面偵測" msgid "Perform Recognition" msgstr "執行偵測" -#, fuzzy -msgid "Brush size" -msgstr "筆刷尺寸" - -#, fuzzy -msgid "Brush shape" -msgstr "筆刷形狀" - -#, fuzzy msgid "Enforce seam" -msgstr "新增Z縫產生區" +msgstr "新增 Z 縫產生區" -#, fuzzy msgid "Block seam" -msgstr "不產生Z縫區" +msgstr "不產生 Z 縫區" -#, fuzzy msgid "Seam painting" -msgstr "自訂Z縫" +msgstr "Z 縫筆刷" msgid "Remove selection" msgstr "移除繪製" msgid "Entering Seam painting" -msgstr "" +msgstr "進入 Z 縫繪製模式" msgid "Leaving Seam painting" -msgstr "" +msgstr "退出 Z 縫繪製模式" msgid "Paint-on seam editing" -msgstr "" +msgstr "Z 縫筆刷編輯" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" -msgstr "字體" +msgstr "字型" msgid "Thickness" msgstr "厚度" @@ -665,7 +784,7 @@ msgid "Angle" msgstr "角度" msgid "" -"Embeded\n" +"Embedded\n" "depth" msgstr "內嵌深度" @@ -678,110 +797,109 @@ msgstr "附著於曲面" msgid "Horizontal text" msgstr "水平文字" -msgid "Shift + Mouse move up or down" -msgstr "Shift + 滑鼠上移或下移" +msgid "Mouse move up or down" +msgstr "" msgid "Rotate text" msgstr "旋轉文字" -#, fuzzy msgid "Text shape" msgstr "新增文字" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" -msgstr "" +msgstr "文字旋轉" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" -msgstr "" +msgstr "文字移動" msgid "Set Mirror" msgstr "設定鏡像" msgid "Embossed text" -msgstr "" +msgstr "浮雕文字" msgid "Enter emboss gizmo" -msgstr "" +msgstr "進入浮雕工具" msgid "Leave emboss gizmo" -msgstr "" +msgstr "退出浮雕工具" msgid "Embossing actions" -msgstr "" +msgstr "浮雕操作" msgid "Emboss" -msgstr "" +msgstr "浮雕" msgid "NORMAL" -msgstr "" +msgstr "正常" msgid "SMALL" -msgstr "" +msgstr "小" msgid "ITALIC" -msgstr "" +msgstr "斜體" msgid "SWISS" -msgstr "" +msgstr "SWISS" msgid "MODERN" -msgstr "" +msgstr "MODERN" msgid "First font" -msgstr "" +msgstr "First font" msgid "Default font" msgstr "預設字型" msgid "Advanced" -msgstr "高級" +msgstr "進階" msgid "" "The text cannot be written using the selected font. Please try choosing a " "different font." -msgstr "" +msgstr "文字與字型不相容，請選擇其他的字型。" msgid "Embossed text cannot contain only white spaces." -msgstr "" +msgstr "浮雕文字不能僅包含空白字元。" msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "" +msgstr "文字包含字型無法識別的字形（以 '?' 表示）。" msgid "Text input doesn't show font skew." -msgstr "" +msgstr "文字輸入未呈現字體的傾斜效果。" msgid "Text input doesn't show font boldness." -msgstr "" +msgstr "文字輸入呈現示字體的粗體效果。" msgid "Text input doesn't show gap between lines." -msgstr "" +msgstr "文字輸入未呈現行距效果。" msgid "Too tall, diminished font height inside text input." -msgstr "" +msgstr "過高，已縮小文字輸入框內的字體高度。" msgid "Too small, enlarged font height inside text input." -msgstr "" +msgstr "太小，已增大文字輸入框內的字體高度。" msgid "Text doesn't show current horizontal alignment." -msgstr "" +msgstr "文字未呈現目前的水平對齊狀態。" msgid "Revert font changes." -msgstr "" +msgstr "還原字體設定變更。" #, boost-format msgid "Font \"%1%\" can't be selected." -msgstr "" +msgstr "字型「%1%」無法選擇。" msgid "Operation" -msgstr "" +msgstr "操作" msgid "Join" -msgstr "" +msgstr "合併" msgid "Click to change text into object part." -msgstr "" +msgstr "點擊將文字轉換為物件部分。" msgid "You can't change a type of the last solid part of the object." msgstr "您無法變更模型最後一個實體部分的類型。" @@ -791,93 +909,93 @@ msgid "Cut" msgstr "切割" msgid "Click to change part type into negative volume." -msgstr "" +msgstr "點擊將零件類型變更為負體積。" msgid "Modifier" msgstr "修改器" msgid "Click to change part type into modifier." -msgstr "" +msgstr "點擊將零件類型變更為修改器。" msgid "Change Text Type" -msgstr "" +msgstr "更改文字類型" #, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "" +msgid "Rename style (%1%) for embossing text" +msgstr "重新命名浮雕文字樣式 (%1%)" msgid "Name can't be empty." -msgstr "" +msgstr "名稱不可空白。" msgid "Name has to be unique." -msgstr "" +msgstr "名稱必須是獨特的。" msgid "OK" msgstr "確認" msgid "Rename style" -msgstr "" +msgstr "更改樣式名稱" msgid "Rename current style." -msgstr "" +msgstr "更改目前樣式名稱。" msgid "Can't rename temporary style." -msgstr "" +msgstr "無法更改臨時樣式名稱。" msgid "First Add style to list." -msgstr "" +msgstr "首先將樣式新增到列表中。" #, boost-format msgid "Save %1% style" -msgstr "" +msgstr "儲存 %1% 的樣式" msgid "No changes to save." -msgstr "" +msgstr "無需保存，因為沒有變更。" msgid "New name of style" -msgstr "" +msgstr "新樣式名稱" msgid "Save as new style" -msgstr "" +msgstr "儲存為新的樣式" msgid "Only valid font can be added to style." -msgstr "" +msgstr "只有有效字體才能加入樣式。" msgid "Add style to my list." -msgstr "" +msgstr "把樣式加入我的列表。" msgid "Save as new style." -msgstr "" +msgstr "儲存為全新的樣式。" msgid "Remove style" -msgstr "" +msgstr "刪除樣式" msgid "Can't remove the last existing style." -msgstr "" +msgstr "無法刪除僅存的樣式。" #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "" +msgstr "您確定要永久移除「%1%」樣式嗎？" #, boost-format msgid "Delete \"%1%\" style." -msgstr "" +msgstr "刪除「%1%」樣式。" #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "" +msgstr "無法刪除「%1%」，因為它是僅存的樣式。" #, boost-format msgid "Can't delete temporary style \"%1%\"." -msgstr "" +msgstr "無法刪除臨時樣式「%1%」。" #, boost-format msgid "Modified style \"%1%\"" -msgstr "" +msgstr "已修改樣式「%1%」" #, boost-format msgid "Current style is \"%1%\"" -msgstr "" +msgstr "目前樣式為「%1%」" #, boost-format msgid "" @@ -885,48 +1003,53 @@ msgid "" "\n" "Would you like to continue anyway?" msgstr "" +"將樣式更改為「%1%」會捨棄目前的樣式修改。\n" +"\n" +"您確定要繼續嗎？" msgid "Not valid style." -msgstr "" +msgstr "無效的樣式。" #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "" +msgstr "樣式「%1%」無法使用，將從列表中移除。" msgid "Unset italic" -msgstr "" +msgstr "取消斜體" msgid "Set italic" -msgstr "" +msgstr "斜體" msgid "Unset bold" -msgstr "" +msgstr "取消粗體" msgid "Set bold" -msgstr "" +msgstr "粗體" msgid "Revert text size." -msgstr "" +msgstr "恢復文字大小。" msgid "Revert embossed depth." -msgstr "" +msgstr "恢復浮雕深度。" msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" +"無法更改所選字型的進階選項。\n" +"請選擇其他字型。" msgid "Revert using of model surface." -msgstr "" +msgstr "還原模型表面的應用設定。" msgid "Revert Transformation per glyph." -msgstr "" +msgstr "重置每個字形的變更設定。" msgid "Set global orientation for whole text." -msgstr "" +msgstr "設定整段文字的全域座標。" msgid "Set position and orientation per glyph." -msgstr "" +msgstr "設定每個字形的位置和方向。" msgctxt "Alignment" msgid "Left" @@ -946,84 +1069,90 @@ msgstr "頂部" msgctxt "Alignment" msgid "Middle" -msgstr "" +msgstr "置中" msgctxt "Alignment" msgid "Bottom" msgstr "底部" msgid "Revert alignment." -msgstr "" +msgstr "恢復對。" #. TRN EmbossGizmo: font units msgid "points" -msgstr "" +msgstr "點" msgid "Revert gap between characters" -msgstr "" +msgstr "恢復字元間距" msgid "Distance between characters" -msgstr "" +msgstr "字元間距" msgid "Revert gap between lines" -msgstr "" +msgstr "恢復線間距" msgid "Distance between lines" -msgstr "" +msgstr "線間距" msgid "Undo boldness" -msgstr "" +msgstr "恢復粗體" msgid "Tiny / Wide glyphs" -msgstr "" +msgstr "細小 / 寬大字形」" msgid "Undo letter's skew" -msgstr "" +msgstr "恢復文字變形" msgid "Italic strength ratio" -msgstr "" +msgstr "斜體效果的強度比例" msgid "Undo translation" -msgstr "" +msgstr "恢復移動" msgid "Distance of the center of the text to the model surface." -msgstr "" +msgstr "文字中心到模型表面的距離。" msgid "Undo rotation" -msgstr "" +msgstr "恢復旋轉" -msgid "Rotate text Clock-wise." -msgstr "" +msgid "Rotate text Clockwise." +msgstr "文字順時針旋轉。" msgid "Unlock the text's rotation when moving text along the object's surface." -msgstr "" +msgstr "在沿物體表面移動文字時解鎖文字旋轉。" msgid "Lock the text's rotation when moving text along the object's surface." -msgstr "" +msgstr "將文字旋轉鎖定，並沿物體表面移動文字。" msgid "Select from True Type Collection." -msgstr "" +msgstr "從 True Type 中選擇。" msgid "Set text to face camera" -msgstr "" +msgstr "將文字面對相機" msgid "Orient the text towards the camera." -msgstr "" +msgstr "將文字朝向相機定向。" + +#, boost-format +msgid "Font \"%1%\" can't be used. Please select another." +msgstr "字型 「%1%」 無法使用，請選擇其他字型。" #, boost-format msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." +"Can't load exactly same font (\"%1%\"). Application selected a similar one " +"(\"%2%\"). You have to specify font for enable edit text." msgstr "" +"無法加載完全相同的字體「%1%」。已自動選擇相似的字體「%2%」。若要啟用文字編" +"輯，請指定字體。" msgid "No symbol" -msgstr "" +msgstr "沒有任何字符" msgid "Loading" msgstr "載入中" msgid "In queue" -msgstr "" +msgstr "在佇列中" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent @@ -1034,13 +1163,13 @@ msgstr "高度" #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" -msgstr "" +msgstr "用面" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" -msgstr "" +msgstr "每個字形" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right @@ -1049,20 +1178,20 @@ msgstr "對齊" #. TRN - Input label. Be short as possible msgid "Char gap" -msgstr "" +msgstr "字元間距" #. TRN - Input label. Be short as possible msgid "Line gap" -msgstr "" +msgstr "行間距" #. TRN - Input label. Be short as possible msgid "Boldness" -msgstr "" +msgstr "粗細" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" -msgstr "" +msgstr "傾斜比率" #. TRN - Input label. Be short as possible #. Distance from model surface to be able @@ -1070,163 +1199,168 @@ msgstr "" #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" -msgstr "" +msgstr "從面" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" -msgstr "" +msgstr "保持向上" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" -msgstr "" +msgstr "字集" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" -msgstr "" +msgstr "SVG 旋轉" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" -msgstr "" +msgstr "SVG 移動" msgid "Enter SVG gizmo" -msgstr "" +msgstr "進入 SVG 工具" msgid "Leave SVG gizmo" -msgstr "" +msgstr "退出 SVG 工具" msgid "SVG actions" -msgstr "" +msgstr "SVG 操作" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" -msgstr "" +msgstr "不透明度 (%1%)" #, boost-format msgid "Color gradient (%1%)" -msgstr "" +msgstr "顏色漸層 (%1%)" msgid "Undefined fill type" -msgstr "" +msgstr "未定義的填充類型" msgid "Linear gradient" -msgstr "" +msgstr "線性漸層" msgid "Radial gradient" -msgstr "" +msgstr "徑向漸層" msgid "Open filled path" -msgstr "" +msgstr "打開填充路徑" msgid "Undefined stroke type" -msgstr "" +msgstr "未定義的筆劃類型" -msgid "Path can't be healed from selfintersection and multiple points." -msgstr "" +msgid "Path can't be healed from self-intersection and multiple points." +msgstr "無法修復具有自交錯和多點的路徑。" msgid "" -"Final shape constains selfintersection or multiple points with same " +"Final shape contains self-intersection or multiple points with same " "coordinate." -msgstr "" +msgstr "最終形狀包含自相交或多個具有相同座標的點。" #, boost-format msgid "Shape is marked as invisible (%1%)." -msgstr "" +msgstr "形狀被標記為隱形 (%1%)。" -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. +#. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "" +msgstr "形狀 (%1%) 的填充包含不支援的內容：%2%。" #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." -msgstr "" +msgstr "形狀 (%1%) 的筆劃過細（最小寬度為 %2% 毫米）" #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "" +msgstr "形狀 (%1%) 的筆劃包含不支援的內容：%2%。" msgid "Face the camera" -msgstr "" +msgstr "面向相機" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" -msgstr "" +msgstr "未知的檔案名稱" #, boost-format msgid "SVG file path is \"%1%\"" -msgstr "" +msgstr "SVG 檔案路徑為「%1%」" msgid "Reload SVG file from disk." -msgstr "" +msgstr "從硬碟重新載入 SVG 檔案。" msgid "Change file" -msgstr "" +msgstr "更換檔案" -msgid "Change to another .svg file" -msgstr "" +#, fuzzy +msgid "Change to another SVG file." +msgstr "更換為另一個 .svg 檔案" msgid "Forget the file path" -msgstr "" +msgstr "忘記檔案路徑" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" +"不要將本地路徑保存到 3MF 檔案中。\n" +"同時停用「從硬碟重新載入」選項。" #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" -msgstr "" +msgstr "固化" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "" +msgstr "固化至模型中作為不可編輯部分" msgid "Save as" -msgstr "" +msgstr "儲存為" +#, fuzzy msgid "Save SVG file" -msgstr "" +msgstr "儲存 '.svg' 檔案" -msgid "Save as '.svg' file" -msgstr "" +#, fuzzy +msgid "Save as SVG file." +msgstr "儲存為 '.svg' 檔案" msgid "Size in emboss direction." -msgstr "" +msgstr "浮雕方向的尺寸。" #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" -msgstr "" +msgstr "縮放同時會改變曲線取樣數量（%1%）。" msgid "Width of SVG." -msgstr "" +msgstr "SVG 寬。" msgid "Height of SVG." -msgstr "" +msgstr "SVG 高。" msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "" +msgstr "鎖定/解鎖 SVG 的長寬比。" msgid "Reset scale" msgstr "重置比例" msgid "Distance of the center of the SVG to the model surface." -msgstr "" +msgstr "SVG 中心到模型表面的距離。" msgid "Reset distance" -msgstr "" +msgstr "重置距離" msgid "Reset rotation" msgstr "重置旋轉" msgid "Lock/unlock rotation angle when dragging above the surface." -msgstr "" +msgstr "拖曳於表面時，鎖定/解鎖旋轉角度。" msgid "Mirror vertically" msgstr "垂直鏡像" @@ -1236,85 +1370,89 @@ msgstr "水平鏡像" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" -msgstr "" +msgstr "更改 SVG 類型" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "鏡像" msgid "Choose SVG file for emboss:" -msgstr "" +msgstr "選擇用於浮雕的 SVG 檔案：" #, boost-format msgid "File does NOT exist (%1%)." -msgstr "" +msgstr "檔案不存在（%1%）。" #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" -msgstr "" +msgstr "副檔名必須為「.svg」 ，但選擇的是 %1%" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." -msgstr "" +msgstr "Nano SVG 解析器無法載入檔案 (%1%)。" #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "" +msgstr "SVG 檔案無要浮雕的路徑 (%1%)。" + +msgid "No feature" +msgstr "沒有特徵" msgid "Vertex" -msgstr "" +msgstr "頂點" msgid "Edge" -msgstr "" +msgstr "邊" msgid "Plane" -msgstr "" +msgstr "平面" msgid "Point on edge" -msgstr "" +msgstr "邊上的點" msgid "Point on circle" -msgstr "" +msgstr "圓上的點" msgid "Point on plane" -msgstr "" +msgstr "平面上的點" msgid "Center of edge" -msgstr "" +msgstr "邊中心" msgid "Center of circle" -msgstr "" - -msgid "ShiftLeft mouse button" -msgstr "" +msgstr "圓中心" msgid "Select feature" -msgstr "" +msgstr "選擇特徵" msgid "Select point" -msgstr "" +msgstr "選點" msgid "Delete" msgstr "刪除" msgid "Restart selection" -msgstr "" +msgstr "重新開始選取" msgid "Esc" msgstr "Esc" -msgid "Unselect" -msgstr "" +msgid "Cancel a feature until exit" +msgstr "在退出前取消功能" msgid "Measure" -msgstr "" +msgstr "測量" + +msgid "" +"Please confirm explosion ratio = 1, and please select at least one object." +msgstr "請確認爆炸比例設為 1，並至少選擇一個物件" msgid "Edit to scale" -msgstr "" +msgstr "編輯比例" msgctxt "Verb" -msgid "Scale" -msgstr "縮放" +msgid "Scale all" +msgstr "全部縮放" msgid "None" msgstr "無" @@ -1328,23 +1466,79 @@ msgstr "長度" msgid "Selection" msgstr "所選項目" +msgid " (Moving)" +msgstr " (移動)" + +msgid "" +"Select 2 faces on objects and \n" +" make objects assemble together." +msgstr "選擇物件上的兩個面，使物件組裝在一起。" + +msgid "" +"Select 2 points or circles on objects and \n" +" specify distance between them." +msgstr "選擇物件上的兩個點或圓，指定它們之間的距離。" + +msgid "Face" +msgstr "面" + +msgid " (Fixed)" +msgstr " (固定)" + +msgid "Point" +msgstr "點" + +msgid "" +"Feature 1 has been reset, \n" +"feature 2 has been feature 1" +msgstr "" +"特徵 1 已重設，\n" +"特徵 2 已變為特徵 1" + +msgid "Warning: please select Plane's feature." +msgstr "警告：請選擇平面的特徵。" + +msgid "Warning: please select Point's or Circle's feature." +msgstr "警告：請選擇點或圓的特徵。" + +msgid "Warning: please select two different meshes." +msgstr "警告：請選擇兩個不同的網格。" + msgid "Copy to clipboard" msgstr "複製到剪貼簿" msgid "Perpendicular distance" -msgstr "" +msgstr "垂直方向" msgid "Distance" -msgstr "" +msgstr "距離" msgid "Direct distance" -msgstr "" +msgstr "直接距離" msgid "Distance XYZ" -msgstr "" +msgstr "XYZ 距離" -msgid "Ctrl+" -msgstr "Ctrl+" +msgid "Parallel" +msgstr "平行" + +msgid "Center coincidence" +msgstr "中心重合" + +msgid "Feature 1" +msgstr "特徵 1" + +msgid "Reverse rotation" +msgstr "反向旋轉" + +msgid "Rotate around center:" +msgstr "圍繞中心旋轉：" + +msgid "Parallel distance:" +msgstr "平行距離：" + +msgid "Flip by Face 2" +msgstr "通過面 2 翻轉" msgid "Notice" msgstr "通知" @@ -1356,9 +1550,8 @@ msgstr "未定義" msgid "%1% was replaced with %2%" msgstr "%1% 已被 %2% 替換" -#, fuzzy msgid "The configuration may be generated by a newer version of Snapmaker Orca." -msgstr "此設定可能由新版本的 Snapmaker Orca 產生" +msgstr "此設定可能是新版本的 Snapmaker Orca 所產生。" msgid "Some values have been replaced. Please check them:" msgstr "部分數值已被更換，請檢查：" @@ -1369,50 +1562,49 @@ msgstr "列印參數" msgid "Filament" msgstr "線材" -#, fuzzy msgid "Machine" msgstr "列印設備" -#, fuzzy msgid "Configuration package was loaded, but some values were not recognized." -msgstr "設定檔已被載入，但部分數值未被識別。" +msgstr "設定檔已被載入，但部分數值無法識別。" -#, fuzzy, boost-format +#, boost-format msgid "" "Configuration file \"%1%\" was loaded, but some values were not recognized." -msgstr "設定檔 “%1%” 已被載入，但部分數值未被識別。" +msgstr "設定檔「%1%」 已被載入，但部分數值無法識別。" + +msgid "Based on PrusaSlicer and BambuStudio" +msgstr "" -#, fuzzy msgid "" -"Snapmaker Orca will terminate because of running out of memory.It may be a bug. " +"Snapmaker Orca will terminate because of running out of memory. It may be a bug. " "It will be appreciated if you report the issue to our team." msgstr "" -"系統記憶體耗盡，Snapmaker Orca 即將停止並且結束。這可能是個錯誤，希望您可以報告" -"此問題，我們將非常感激。" +"系統記憶體耗盡，Snapmaker Orca 即將停止並且結束。這可能是個錯誤，希望您可以回報" +"此問題，我們非常感激。" msgid "Fatal error" msgstr "致命錯誤" -#, fuzzy msgid "" "Snapmaker Orca will terminate because of a localization error. It will be " "appreciated if you report the specific scenario this issue happened." msgstr "" -"遇到語系本地化錯誤，Snapmaker Orca 即將停止並且結束。希望您可以報告發生此問題的" -"具體狀況，我們將非常感激。" +"遇到語系本地化錯誤，Snapmaker Orca 即將停止並且結束。希望您可以回報發生此問題的" +"具體狀況，我們非常感激。" msgid "Critical error" msgstr "嚴重錯誤" -#, fuzzy, boost-format +#, boost-format msgid "Snapmaker Orca got an unhandled exception: %1%" -msgstr "Snapmaker Orca 遭遇到一個未處理的異常：%1%" +msgstr "Snapmaker Orca 遭遇到一個未處理的例外：%1%" msgid "Untitled" msgstr "未命名" msgid "Downloading Bambu Network Plug-in" -msgstr "正在下載 Bambu 網路套件" +msgstr "正在下載 Bambu 網路外掛程式" msgid "Login information expired. Please login again." msgstr "登入資訊已過期。請重新登入。" @@ -1420,7 +1612,7 @@ msgstr "登入資訊已過期。請重新登入。" msgid "Incorrect password" msgstr "密碼不正確" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "連接 %s 失敗。[SN：%s, code＝%s]" @@ -1435,7 +1627,11 @@ msgstr "" msgid "WebView2 Runtime" msgstr "WebView2 Runtime" -#, fuzzy, c-format, boost-format +#, c-format, boost-format +msgid "Resources path does not exist or is not a directory: %s" +msgstr "" + +#, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" @@ -1446,17 +1642,15 @@ msgstr "" msgid "Remember my choice" msgstr "記住我的選擇" -#, fuzzy msgid "Loading configuration" msgstr "正在讀取設定檔" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Click to download new version in default browser: %s" -msgstr "在預設瀏覽器中點擊下載最新版本： %s" +msgstr "在預設瀏覽器中開啟頁面下載最新版本： %s" -#, fuzzy msgid "The Snapmaker Orca needs an upgrade" -msgstr " Snapmaker Orca 需要進行升級" +msgstr "Snapmaker Orca 需要進行升級" msgid "This is the newest version." msgstr "已經是最新版本。" @@ -1470,42 +1664,41 @@ msgid "" "Please note, application settings will be lost, but printer profiles will " "not be affected." msgstr "" +"Snapmaker Orca 的組態檔案可能已損壞，無法解析。\n" +"Snapmaker Orca 已嘗試重新建立組態檔案。\n" +"請注意，應用程式設定將會丟失，但機臺組態設定不會受到影響。" msgid "Rebuild" msgstr "重新建構" -#, fuzzy msgid "Loading current presets" msgstr "載入目前預設" msgid "Loading a mode view" msgstr "載入模式視圖" -#, fuzzy -msgid "Choose one file (3mf):" -msgstr "選擇一個檔案（3mf）" +msgid "Choose one file (3MF):" +msgstr "選擇一個檔案（3MF）" -#, fuzzy -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "選擇一個或多個檔案（3mf/step/stl/svg/obj/amf/usd*/abc/ply）：" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "選擇一個或多個檔案(3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY)：" -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "選擇一個或多個檔案（3mf/step/stl/svg/obj/amf）：" +msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" +msgstr "選擇一個或多個檔案(3MF/STEP/STL/SVG/OBJ/AMF)：" msgid "Choose ZIP file" -msgstr "" +msgstr "選擇 ZIP 檔" -#, fuzzy -msgid "Choose one file (gcode/3mf):" -msgstr "選擇一個檔案（gcode/3mf）：" +msgid "Choose one file (GCODE/3MF):" +msgstr "選擇一個檔案（GCODE/3MF）：" msgid "Some presets are modified." msgstr "部分預設已被修改。" msgid "" -"You can keep the modifield presets to the new project, discard or save " +"You can keep the modified presets to the new project, discard or save " "changes as new presets." -msgstr "您可以保留尚未儲存修改的預設應用到新項目中，或者選擇忽略。" +msgstr "您可以保留尚未儲存修改的預設套用到新項目中，或者選擇忽略。" msgid "User logged out" msgstr "使用者登出" @@ -1516,11 +1709,10 @@ msgstr "在執行切片過程中不允許新增或打開專案項目！" msgid "Open Project" msgstr "打開專案項目" -#, fuzzy msgid "" "The version of Snapmaker Orca is too low and needs to be updated to the latest " -"version before it can be used normally" -msgstr " Snapmaker Orca 版本過低，需要更新到最新版本方可正常使用" +"version before it can be used normally." +msgstr "Snapmaker Orca 版本過舊，需要更新到最新版本才能正常使用" msgid "Privacy Policy Update" msgstr "隱私協議更新" @@ -1528,10 +1720,10 @@ msgstr "隱私協議更新" msgid "" "The number of user presets cached in the cloud has exceeded the upper limit, " "newly created user presets can only be used locally." -msgstr "" +msgstr "雲端儲存的使用者預設數量已超過上限，新的使用者預設僅能在本地使用。" msgid "Sync user presets" -msgstr "" +msgstr "同步使用者預設" msgid "Loading user preset" msgstr "正在載入使用者預設" @@ -1563,7 +1755,7 @@ msgstr "選擇一個 G-code 檔案：" msgid "" "Could not start URL download. Destination folder is not set. Please choose " "destination folder in Configuration Wizard." -msgstr "" +msgstr "無法開始 URL 下載。未設置目標資料夾。請在設定精靈中選擇目標資料夾。" msgid "Import File" msgstr "匯入檔案" @@ -1580,17 +1772,15 @@ msgstr "打開" msgid "Rename" msgstr "重新命名" -#, fuzzy msgid "Snapmaker Orca GUI initialization failed" -msgstr " Snapmaker Orca 圖形界面初始化失敗" +msgstr "Snapmaker Orca 圖形界面初始化失敗" #, boost-format -msgid "Fatal error, exception catched: %1%" +msgid "Fatal error, exception caught: %1%" msgstr "致命錯誤，遭遇到異常：%1%" -#, fuzzy msgid "Quality" -msgstr "列印品質" +msgstr "品質" msgid "Shell" msgstr "外殼" @@ -1604,13 +1794,11 @@ msgstr "支撐" msgid "Flush options" msgstr "換料沖刷選項" -#, fuzzy msgid "Speed" -msgstr "列印速度" +msgstr "速度" -#, fuzzy msgid "Strength" -msgstr "列印強度" +msgstr "結構" msgid "Top Solid Layers" msgstr "頂部實心層" @@ -1618,12 +1806,18 @@ msgstr "頂部實心層" msgid "Top Minimum Shell Thickness" msgstr "頂部外殼最小厚度" +msgid "Top Surface Density" +msgstr "" + msgid "Bottom Solid Layers" msgstr "底部實心層" msgid "Bottom Minimum Shell Thickness" msgstr "底部外殼最小厚度" +msgid "Bottom Surface Density" +msgstr "" + msgid "Ironing" msgstr "熨燙" @@ -1642,7 +1836,6 @@ msgstr "擦除選項" msgid "Bed adhesion" msgstr "熱床黏接" -#, fuzzy msgid "Add part" msgstr "新增零件" @@ -1659,22 +1852,22 @@ msgid "Add support enforcer" msgstr "新增支撐產生器" msgid "Add text" -msgstr "" +msgstr "加文字" msgid "Add negative text" -msgstr "" +msgstr "加負文字" msgid "Add text modifier" -msgstr "" +msgstr "加文字修改器" msgid "Add SVG part" -msgstr "" +msgstr "加SVG物件" msgid "Add negative SVG" -msgstr "" +msgstr "加負SVG" msgid "Add SVG modifier" -msgstr "" +msgstr "加SVG修改器" msgid "Select settings" msgstr "選擇設定" @@ -1691,6 +1884,9 @@ msgstr "刪除" msgid "Delete the selected object" msgstr "刪除所選物件" +msgid "Backspace" +msgstr "" + msgid "Load..." msgstr "載入..." @@ -1704,14 +1900,17 @@ msgid "Cone" msgstr "錐體" msgid "Disc" -msgstr "" +msgstr "圓盤" msgid "Torus" -msgstr "" +msgstr "環面" msgid "Orca Cube" msgstr "Orca 立方體" +msgid "Orca Tolerance Test" +msgstr "Orca 誤差測試" + msgid "3DBenchy" msgstr "測試小船" @@ -1722,21 +1921,26 @@ msgid "Voron Cube" msgstr "Voron 立方體" msgid "Stanford Bunny" -msgstr "" +msgstr "斯坦福兔子" msgid "Orca String Hell" -msgstr "" +msgstr "Orca 拉絲測試" msgid "" "This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 " "for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" +"這個模型在頂部表面具有文字浮雕效果。為了達到最佳效果，建議將「One Wall " +"Threshold（min_width_top_surface）」設為 0，以便「僅在頂部表面用一層牆壁」能" +"夠最佳運作。\n" +"是 - 自動更改這些設定\n" +"否 - 不為我更改這些設定" msgid "Text" -msgstr "" +msgstr "文字" msgid "Height range Modifier" msgstr "高度範圍修改器" @@ -1747,38 +1951,35 @@ msgstr "新增設定" msgid "Change type" msgstr "更改類型" -#, fuzzy msgid "Set as an individual object" msgstr "設定為獨立物件" -#, fuzzy msgid "Set as individual objects" msgstr "設定為獨立物件" msgid "Fill bed with copies" -msgstr "鋪滿列印板" +msgstr "填滿列印底板" -#, fuzzy msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "用選取物件的副本鋪滿列印板的空白區域" +msgstr "複製選取物件來填滿列印底板的空白區域" msgid "Printable" -msgstr "可列印的" +msgstr "要列印的" msgid "Fix model" msgstr "修復模型" msgid "Export as one STL" -msgstr "" +msgstr "匯出為單一 STL" msgid "Export as STLs" -msgstr "" +msgstr "匯出為 STLs" msgid "Reload from disk" -msgstr "從磁碟重新載入" +msgstr "從硬碟重新載入" msgid "Reload the selected parts from disk" -msgstr "從磁碟重新載入選中的零件" +msgstr "從硬碟重新載入選中的零件" msgid "Replace with STL" msgstr "替換為 STL" @@ -1786,12 +1987,17 @@ msgstr "替換為 STL" msgid "Replace the selected part with new STL" msgstr "用新的 STL 替換選中的零件" +msgid "Replace all with STL" +msgstr "" + +msgid "Replace all selected parts with STL from folder" +msgstr "" + msgid "Change filament" msgstr "更換線材" -#, fuzzy msgid "Set filament for selected items" -msgstr "為所選項目設定使用的線材" +msgstr "為所選物件設定使用的線材" msgid "Default" msgstr "預設" @@ -1800,7 +2006,6 @@ msgstr "預設" msgid "Filament %d" msgstr "線材 %d" -#, fuzzy msgid "current" msgstr "目前" @@ -1810,7 +2015,6 @@ msgstr "縮放到列印空間範圍大小" msgid "Scale an object to fit the build volume" msgstr "縮放物件以適應列印空間範圍大小" -#, fuzzy msgid "Flush Options" msgstr "換料沖刷選項" @@ -1826,16 +2030,16 @@ msgstr "將換料的廢料使用在物件的支撐" msgid "Edit in Parameter Table" msgstr "在參數表格中編輯" -msgid "Convert from inch" +msgid "Convert from inches" msgstr "從英寸轉換" -msgid "Restore to inch" +msgid "Restore to inches" msgstr "恢復到英寸" -msgid "Convert from meter" +msgid "Convert from meters" msgstr "從公尺轉換" -msgid "Restore to meter" +msgid "Restore to meters" msgstr "恢復到公尺" msgid "Assemble" @@ -1847,11 +2051,9 @@ msgstr "組合所選物件為一個多零件物件" msgid "Assemble the selected objects to an object with single part" msgstr "組合所選物件為一個單零件物件" -#, fuzzy msgid "Mesh boolean" msgstr "網格布林操作" -#, fuzzy msgid "Mesh boolean operations including union and subtraction" msgstr "包括併集和差集的網格布林運算" @@ -1877,16 +2079,16 @@ msgid "Mirror object" msgstr "鏡像物件" msgid "Edit text" -msgstr "" +msgstr "編輯文字" msgid "Ability to change text, font, size, ..." -msgstr "" +msgstr "編輯文字、字型、尺寸..." msgid "Edit SVG" -msgstr "" +msgstr "編輯 SVG" msgid "Change SVG source file, projection, size, ..." -msgstr "" +msgstr "更改 SVG 來源、投影、尺寸..." msgid "Invalidate cut info" msgstr "解除切割關係" @@ -1895,7 +2097,7 @@ msgid "Add Primitive" msgstr "新增標準模型" msgid "Add Handy models" -msgstr "" +msgstr "新增測試用模型" msgid "Add Models" msgstr "新增模型" @@ -1924,52 +2126,78 @@ msgstr "拆分所選物件" msgid "Auto orientation" msgstr "自動定向" -#, fuzzy -msgid "Auto orient the object to improve print quality." -msgstr "自動調整物件方向以提高列印品質。" +msgid "Auto orient the object to improve print quality" +msgstr "自動調整物件轉向以提高列印品質。" + +msgid "Edit" +msgstr "編輯" + +msgid "Delete this filament" +msgstr "" + +msgid "Merge with" +msgstr "" msgid "Select All" msgstr "全選" -#, fuzzy msgid "select all objects on current plate" -msgstr "全選列印板上所有物件" +msgstr "全選此列印板上所有物件" msgid "Delete All" msgstr "刪除所有" -#, fuzzy msgid "delete all objects on current plate" -msgstr "刪除列印板上所有物件" +msgstr "刪除此列印板上所有物件" msgid "Arrange" msgstr "自動擺放" -#, fuzzy msgid "arrange current plate" -msgstr "在列印板執行自動擺放" +msgstr "自動擺放此列印版" msgid "Reload All" -msgstr "" +msgstr "重新載入所有物件" msgid "reload all from disk" -msgstr "" +msgstr "從硬碟重新載入所有物件" msgid "Auto Rotate" msgstr "自動旋轉方向" -#, fuzzy msgid "auto rotate current plate" -msgstr "在列印板執行自動旋轉方向" +msgstr "自動旋轉此列印板上的物件方向" -#, fuzzy msgid "Delete Plate" msgstr "刪除列印板" -#, fuzzy msgid "Remove the selected plate" msgstr "刪除所選列印板" +msgid "Add instance" +msgstr "" + +msgid "Add one more instance of the selected object" +msgstr "" + +msgid "Remove instance" +msgstr "" + +msgid "Remove one instance of the selected object" +msgstr "" + +msgid "Set number of instances" +msgstr "" + +msgid "Change the number of instances of the selected object" +msgstr "" + +msgid "Fill bed with instances" +msgstr "" + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" + msgid "Clone" msgstr "複製" @@ -1979,9 +2207,18 @@ msgstr "簡化模型" msgid "Center" msgstr "居中" +msgid "Drop" +msgstr "Drop" + msgid "Edit Process Settings" msgstr "編輯列印參數" +msgid "Copy Process Settings" +msgstr "" + +msgid "Paste Process Settings" +msgstr "" + msgid "Edit print parameters for a single object" msgstr "編輯單個物件的列印參數" @@ -1997,7 +2234,6 @@ msgstr "解鎖" msgid "Lock" msgstr "鎖定" -#, fuzzy msgid "Edit Plate Name" msgstr "編輯列印板名" @@ -2005,17 +2241,17 @@ msgid "Name" msgstr "名稱" msgid "Fila." -msgstr "線材" +msgstr "線材。" #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" -msgstr[0] "%1$d 個錯誤被修復" +msgstr[0] "%1$d 個錯誤已修復" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "錯誤：%1$d 非流形邊." +msgstr[0] "%1$d 個非流形邊緣。" msgid "Remaining errors" msgstr "剩餘錯誤" @@ -2023,37 +2259,29 @@ msgstr "剩餘錯誤" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d 非流形邊" +msgstr[0] "%1$d 個非流形邊緣" -#, fuzzy -msgid "Right click the icon to fix model object" -msgstr "滑鼠右鍵點擊此圖示可修復模型物件" +msgid "Click the icon to repair model object" +msgstr "點擊圖示來修復模型" -#, fuzzy msgid "Right button click the icon to drop the object settings" -msgstr "滑鼠右鍵點擊此圖示以放棄物件的設定參數" +msgstr "滑鼠右鍵點擊此圖示以放棄物件的列印設定" -#, fuzzy msgid "Click the icon to reset all settings of the object" -msgstr "滑鼠左鍵點擊此圖示可重設物件的所有設定參數" +msgstr "滑鼠左鍵點擊此圖示可重設物件的所有列印設定" -#, fuzzy msgid "Right button click the icon to drop the object printable property" msgstr "滑鼠右鍵點擊此圖示以捨棄物件的可列印屬性" -#, fuzzy msgid "Click the icon to toggle printable property of the object" msgstr "滑鼠左點擊此圖示可切換這個物件的可列印屬性" -#, fuzzy msgid "Click the icon to edit support painting of the object" msgstr "滑鼠左鍵點擊此圖示可編輯這個物件的支撐繪製" -#, fuzzy msgid "Click the icon to edit color painting of the object" msgstr "滑鼠左鍵點擊此圖示可編輯這個物件的顏色繪製" -#, fuzzy msgid "Click the icon to shift this object to the bed" msgstr "滑鼠左鍵點擊這個圖示可將物件移動到列印板上" @@ -2064,7 +2292,7 @@ msgid "Error!" msgstr "錯誤！" msgid "Failed to get the model data in the current file." -msgstr "取得目前檔案中的模型數據失敗。" +msgstr "取得目前檔案中的模型資料失敗。" msgid "Generic" msgstr "一般" @@ -2075,11 +2303,13 @@ msgstr "新增修改器" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "切換到各個物件設定模式以編輯修改器的設定參數。" -#, fuzzy msgid "" "Switch to per-object setting mode to edit process settings of selected " "objects." -msgstr "切換到各個物件設定模式以編輯所選物件的列印參數" +msgstr "切換到物件設定模式編輯所選物件的列印參數。" + +msgid "Remove paint-on fuzzy skin" +msgstr "移除塗刷的絨毛效果" msgid "Delete connector from object which is a part of cut" msgstr "刪除的連接件屬於切割物件的一部分" @@ -2095,17 +2325,17 @@ msgid "" "objects." msgstr "為保證切割關係，您可以將所有關聯物件的連接件一起刪除。" -#, fuzzy msgid "" "This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" +"After that model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate " -"cut infornation first." +"cut information first." msgstr "" -"該行為將破壞切割關係，在此之後將無法保證模型一致性。\n" +"此操作將打破切割對應關係。\n" +"模型一致性可能無法再保證。\n" "\n" -"如果要操作子零件或者負零件，需要先解除切割關係。" +"如果要操作子零件或者負體積，需要先解除切割關係。" msgid "Delete all connectors" msgstr "刪除所有連接件" @@ -2113,8 +2343,8 @@ msgstr "刪除所有連接件" msgid "Deleting the last solid part is not allowed." msgstr "不允許刪除物件的最後一個實體零件。" -msgid "The target object contains only one part and can not be splited." -msgstr "目標物件僅包含一個零件，無法被拆分。" +msgid "The target object contains only one part and can not be split." +msgstr "目標物件只有一個部件，無法進行拆分。" msgid "Assembly" msgstr "組合體" @@ -2156,13 +2386,12 @@ msgid "Selection conflicts" msgstr "選擇衝突" msgid "" -"If first selected item is an object, the second one should also be object." +"If the first selected item is an object, the second should also be an object." msgstr "如果第一個選擇的是物件，那麼第二個選擇的也必須是物件。" -#, fuzzy msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." +"If the first selected item is a part, the second should be a part in the " +"same object." msgstr "如果第一個選擇的是零件，那麼第二個選擇的也必須是同一個物件中的零件。" msgid "The type of the last solid object part is not to be changed." @@ -2221,10 +2450,9 @@ msgstr "數值錯誤。" msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "一個單元格僅能被複製到同一列的一個或多個單元格" -msgid "multiple cells copy is not supported" +msgid "Copying multiple cells is not supported." msgstr "不支援多個單元格的複製" -#, fuzzy msgid "Outside" msgstr "列印板外" @@ -2234,16 +2462,18 @@ msgstr "層高" msgid "Wall loops" msgstr "牆層數" -#, fuzzy msgid "Infill density(%)" msgstr "填充密度（%）" msgid "Auto Brim" -msgstr "自動Brim（裙邊）" +msgstr "自動" msgid "Mouse ear" msgstr "圓盤" +msgid "Painted" +msgstr "上色" + msgid "Outer brim only" msgstr "僅外側" @@ -2253,22 +2483,18 @@ msgstr "僅內側" msgid "Outer and inner brim" msgstr "內側和外側" -#, fuzzy msgid "No-brim" -msgstr "無brim（裙邊）" +msgstr "無 Brim" msgid "Outer wall speed" msgstr "外牆速度" -#, fuzzy msgid "Plate" msgstr "列印板" -#, fuzzy msgid "Brim" -msgstr "Brim（裙邊）" +msgstr "Brim" -#, fuzzy msgid "Object/Part Setting" msgstr "物件/零件 設定" @@ -2285,10 +2511,10 @@ msgid "More" msgstr "詳情" msgid "Open Preferences." -msgstr "偏好設定" +msgstr "偏好設定。" msgid "Open next tip." -msgstr "打開下一條提示" +msgstr "打開下一條提示。" msgid "Open Documentation in web browser." msgstr "在網頁瀏覽器中打開檔案。" @@ -2300,16 +2526,16 @@ msgid "Pause" msgstr "暫停" msgid "Template" -msgstr "" +msgstr "範本" msgid "Custom" msgstr "自訂" msgid "Pause:" -msgstr "暫停" +msgstr "暫停：" msgid "Custom Template:" -msgstr "自訂模板：" +msgstr "自訂範本：" msgid "Custom G-code:" msgstr "自訂 G-code：" @@ -2317,12 +2543,11 @@ msgstr "自訂 G-code：" msgid "Custom G-code" msgstr "自訂 G-code" -#, fuzzy msgid "Enter Custom G-code used on current layer:" -msgstr "輸入目前層上使用的自訂 G-code：" +msgstr "輸入當層使用的自訂 G-code：" msgid "Jump to Layer" -msgstr "轉換到層" +msgstr "跳至層" msgid "Please enter the layer number" msgstr "請輸入層數" @@ -2340,7 +2565,7 @@ msgid "Insert custom G-code at the beginning of this layer." msgstr "在該層的初始位置插入自訂 G-code。" msgid "Add Custom Template" -msgstr "新增自訂模板" +msgstr "新增自訂範本" msgid "Insert template custom G-code at the beginning of this layer." msgstr "在該層的初始位置插入模板自訂 G-code。" @@ -2355,7 +2580,7 @@ msgid "Delete Pause" msgstr "刪除暫停列印" msgid "Delete Custom Template" -msgstr "刪除自訂模板" +msgstr "刪除自訂範本" msgid "Edit Custom G-code" msgstr "編輯自訂 G-code" @@ -2366,7 +2591,6 @@ msgstr "刪除自訂 G-code" msgid "Delete Filament Change" msgstr "刪除線材更換" -#, fuzzy msgid "No printer" msgstr "無列印設備" @@ -2376,12 +2600,11 @@ msgstr "..." msgid "Failed to connect to the server" msgstr "無法連接伺服器" -#, fuzzy msgid "Check the status of current system services" msgstr "請檢查目前系統服務狀態" msgid "code" -msgstr "" +msgstr "code" msgid "Failed to connect to cloud service" msgstr "無法連接到雲端服務" @@ -2389,68 +2612,143 @@ msgstr "無法連接到雲端服務" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "請點擊上方的超連結以查看雲端服務狀態" -#, fuzzy msgid "Failed to connect to the printer" msgstr "無法連接列印設備" -#, fuzzy msgid "Connection to printer failed" msgstr "連接列印設備失敗" -#, fuzzy msgid "Please check the network connection of the printer and Orca." -msgstr "請檢查列印設備和 Snapmaker Orca 的網路連接" +msgstr "請檢查列印設備與 Snapmaker Orca 的網路連線。" msgid "Connecting..." msgstr "連線中..." -msgid "?" +msgid "Auto-refill" msgstr "" -msgid "/" -msgstr "" - -msgid "Empty" -msgstr "空" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "自動補充" - -msgid "AMS not connected" -msgstr "AMS 尚未連接" - msgid "Load" msgstr "匯入" msgid "Unload" msgstr "退料" -msgid "Ext Spool" -msgstr "外掛線材" +msgid "" +"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " +"load or unload filaments." +msgstr "選擇一個 AMS 槽，然後按下『上料』或『退料』按鈕來自動加載或卸載耗材。" -msgid "Tips" -msgstr "提示" +msgid "" +"Filament type is unknown which is required to perform this action. Please " +"set target filament's informations." +msgstr "" -msgid "Guide" -msgstr "引導" +msgid "" +"Changing fan speed during printing may affect print quality, please choose " +"carefully." +msgstr "" -msgid "Retry" -msgstr "重試" +msgid "Change Anyway" +msgstr "" -msgid "Calibrating AMS..." -msgstr "正在校準 AMS..." +msgid "Off" +msgstr "" -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "校準過程遇到問題。點擊查看解決方案。" +msgid "Filter" +msgstr "篩選" -msgid "Calibrate again" -msgstr "重新校準" +msgid "" +"Enabling filtration redirects the right fan to filter gas, which may reduce " +"cooling performance." +msgstr "" -msgid "Cancel calibration" -msgstr "取消校準" +msgid "" +"Enabling filtration during printing may reduce cooling and affect print " +"quality. Please choose carefully." +msgstr "" + +msgid "" +"The selected material only supports the current fan mode, and it can't be " +"changed during printing." +msgstr "" + +msgid "Cooling" +msgstr "冷卻" + +msgid "Heating" +msgstr "" + +msgid "Exhaust" +msgstr "" + +msgid "Full Cooling" +msgstr "" + +msgid "Init" +msgstr "" + +msgid "Chamber" +msgstr "" + +msgid "Innerloop" +msgstr "" + +#. TRN To be shown in the main menu View->Top +msgid "Top" +msgstr "頂部" + +msgid "" +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." +msgstr "" + +msgid "" +"Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the " +"chamber air." +msgstr "" + +msgid "" +"Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates " +"filters the chamber air." +msgstr "" + +msgid "" +"Strong cooling mode is suitable for printing PLA/TPU materials. In this " +"mode, the printouts will be fully cooled." +msgstr "" + +msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." +msgstr "" + +msgctxt "air_duct" +msgid "Right(Aux)" +msgstr "" + +msgctxt "air_duct" +msgid "Right(Filter)" +msgstr "" + +msgid "Hotend" +msgstr "" + +msgid "Parts" +msgstr "" + +msgid "Aux" +msgstr "輔助" + +msgid "Nozzle1" +msgstr "" + +msgid "MC Board" +msgstr "" + +msgid "Heat" +msgstr "" + +msgid "Fan" +msgstr "" msgid "Idling..." msgstr "閒置..." @@ -2467,45 +2765,38 @@ msgstr "抽回線材" msgid "Push new filament into extruder" msgstr "送出新的線材到擠出機" +msgid "Grab new filament" +msgstr "咬入線材" + msgid "Purge old filament" msgstr "清除舊線材" -msgid "Feed Filament" -msgstr "進料" - msgid "Confirm extruded" msgstr "確認擠出" msgid "Check filament location" msgstr "檢查線材位置" -msgid "Grab new filament" -msgstr "咬入線材" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." +msgid "The maximum temperature cannot exceed " msgstr "" -msgid "Edit" -msgstr "編輯" - -#, fuzzy -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." +msgid "The minmum temperature should not be less than " msgstr "" -"所有選中的物件都處於被鎖定的列印板上，\n" -"無法對這些物件做自動擺放。" -msgid "No arrangable objects are selected." +msgid "" +"All the selected objects are on a locked plate.\n" +"Cannot auto-arrange these objects." +msgstr "" +"選定的物件都位於鎖定的列印板上，\n" +"無法對其進行自動排列。" + +msgid "No arrangeable objects are selected." msgstr "未選擇欲排列的物件象。" -#, fuzzy msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." -msgstr "該列印板處於鎖定狀態，無法對其進行自動擺放。" +"This plate is locked.\n" +"Cannot auto-arrange on this plate." +msgstr "該列印板處於鎖定狀態，無法執行自動排列。" msgid "Arranging..." msgstr "自動擺放中..." @@ -2516,10 +2807,9 @@ msgstr "自動擺放" msgid "Arranging canceled." msgstr "已取消自動擺放。" -#, fuzzy msgid "" "Arranging is done but there are unpacked items. Reduce spacing and try again." -msgstr "已完成自動擺放，但是有未被擺到列印板內的物件，可在減小物件間距後重試。" +msgstr "已完成自動擺放，但是有未被擺到列印板內的物件，可縮小物件間距後再重試。" msgid "Arranging done." msgstr "已完成自動擺放。" @@ -2528,42 +2818,40 @@ msgid "" "Arrange failed. Found some exceptions when processing object geometries." msgstr "自動擺放失敗，處理物件位置時遇到異常。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single " "bed:\n" "%s" msgstr "" -"自動擺放會忽略以下無法放入單一列印板的物件：\n" +"自動擺放忽略了以下無法放入單一列印板的物件：\n" "%s" -#, fuzzy msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." +"All the selected objects are on a locked plate.\n" +"Cannot auto-orient these objects." msgstr "" "所有選中的物件都處於被鎖定的列印板上，\n" -"無法對這些物件做自動定向。" +"無法對這些物件做自動轉向。" -#, fuzzy msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." +"This plate is locked.\n" +"Cannot auto-orient on this plate." msgstr "" "該列印板處於鎖定狀態，\n" -"無法對其進行自動定向。" +"無法對其進行自動轉向。" msgid "Orienting..." msgstr "自動旋轉方向..." msgid "Orienting" -msgstr "自動旋轉方向..." +msgstr "自動旋轉方向" msgid "Orienting canceled." -msgstr "" +msgstr "自動轉向已取消。" msgid "Filling" -msgstr "" +msgstr "填充中" msgid "Bed filling canceled." msgstr "填充列印板已取消。" @@ -2586,12 +2874,11 @@ msgstr "登入中" msgid "Login failed" msgstr "登入失敗" -#, fuzzy msgid "Please check the printer network connection." -msgstr "請檢查列印設備的網路連接。" +msgstr "請檢查列印設備的網路連線。" msgid "Abnormal print file data. Please slice again." -msgstr "列印檔案資料異常，請重新切片" +msgstr "列印檔案資料異常，請重新切片。" msgid "Task canceled." msgstr "任務已取消。" @@ -2600,9 +2887,9 @@ msgid "Upload task timed out. Please check the network status and try again." msgstr "上傳任務逾時，請排查網路狀態後重試。" msgid "Cloud service connection failed. Please try again." -msgstr "雲端服務連接失敗，請重試" +msgstr "雲端服務連接失敗，請重試。" -msgid "Print file not found. please slice again." +msgid "Print file not found. Please slice again." msgstr "未找到列印檔案，請重新切片。" msgid "" @@ -2616,7 +2903,6 @@ msgstr "無法傳送列印作業，請重試。" msgid "Failed to upload file to ftp. Please try again." msgstr "上傳檔案至 FTP 失敗，請重試。" -#, fuzzy msgid "" "Check the current status of the bambu server by clicking on the link above." msgstr "點擊上方的連結檢查 Bambu 伺服器的即時狀態。" @@ -2626,7 +2912,7 @@ msgid "" "again." msgstr "列印檔案過大，請調整檔案大小後重試。" -msgid "Print file not found, Please slice it again and send it for printing." +msgid "Print file not found, please slice it again and send it for printing." msgstr "未找到列印檔案，請重新切片後再傳送列印。" msgid "" @@ -2641,41 +2927,79 @@ msgid "Sending print job through cloud service" msgstr "正在通過雲端服務傳送列印作業" msgid "Print task sending times out." -msgstr "" +msgstr "連線逾時。" msgid "Service Unavailable" msgstr "暫停服務" msgid "Unknown Error." -msgstr "未知錯誤" +msgstr "未知錯誤。" msgid "Sending print configuration" msgstr "正在傳送列印設定" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" -msgstr "已傳送完成，即將自動轉換到設備頁面（%s秒）" +msgstr "已傳送完成，即將自動跳至設備頁面（%s秒）" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" -msgstr "已成功傳送。將自動轉換到 %ss 中的下一頁。" +msgstr "已成功傳送。將自動跳至 %ss 中的下一頁" -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "透過區域網路列印之前需要插入 SD 記憶卡。" +#, c-format, boost-format +msgid "Access code:%s IP address:%s" +msgstr "訪問代碼：%s　IP 位址：%s" -msgid "Sending gcode file over LAN" +msgid "A Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "" +"Sending print job over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending print job to printer." +msgstr "" + +msgid "Encountered an unknown error with the Storage status. Please try again." +msgstr "" + +#, fuzzy +msgid "Sending G-code file over LAN" msgstr "透過區域網路傳送 gcode 檔案" -msgid "Sending gcode file to sdcard" +#, fuzzy +msgid "Sending G-code file to SD card" msgstr "傳送 gcode 檔案到 SD 記憶卡" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "傳送成功。即將關閉目前頁面（%s秒）" -#, fuzzy -msgid "An SD card needs to be inserted before sending to printer." -msgstr "傳送到列印設備前需要先插入 SD 記憶卡。" +msgid "Storage needs to be inserted before sending to printer." +msgstr "" + +msgid "" +"Sending G-code file over LAN, but the Storage in the printer is abnormal and " +"print-issues may be caused by this." +msgstr "" + +msgid "" +"The Storage in the printer is abnormal. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" + +msgid "" +"The Storage in the printer is read-only. Please replace it with a normal " +"Storage before sending to printer." +msgstr "" msgid "Importing SLA archive" msgstr "匯入 SLA 存檔" @@ -2684,7 +3008,8 @@ msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" -"SLA 存檔不包含任何預設。在匯入該 SLA 存檔之前，請先啟用一些 SLA 印表機預設。" +"SLA 存檔不包含任何預設。在匯入該 SLA 存檔之前，請先啟用一些 SLA 列印設備預" +"設。" msgid "Importing canceled." msgstr "匯入已取消。" @@ -2692,7 +3017,6 @@ msgstr "匯入已取消。" msgid "Importing done." msgstr "匯入完成。" -#, fuzzy msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." @@ -2713,10 +3037,10 @@ msgstr "下載中" msgid "Download failed" msgstr "下載失敗" -msgid "Cancelled" +msgid "Canceled" msgstr "已取消" -msgid "Install successfully." +msgid "Installed successfully" msgstr "安裝成功。" msgid "Installing" @@ -2734,37 +3058,30 @@ msgstr "版權" msgid "License" msgstr "憑證" -#, fuzzy msgid "Snapmaker Orca is licensed under " -msgstr " Snapmaker Orca 是在" +msgstr "Snapmaker Orca 授權於" msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero 通用公共許可證，版本 3 下授權的" +msgstr "GNU Affero 通用公共許可證，版本 3" -msgid "Snapmaker Orca is Based on Orca Slicer" -msgstr "" +msgid "Snapmaker Orca is based on PrusaSlicer and BambuStudio" +msgstr "Snapmaker Orca 基於 PrusaSlicer 與 BambuStudio" msgid "Libraries" -msgstr "庫" +msgstr "Libraries" msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" -msgstr "本軟體使用開源組件，其版權和其他所有權屬於各自的所有者" +msgstr "本軟體採用了開源組件，其版權及相關專有權歸屬於各自的所有者" #, c-format, boost-format msgid "About %s" msgstr "關於 %s" -msgid "Snapmaker Orca " -msgstr "Snapmaker Orca " - -#, fuzzy msgid "Snapmaker Orca is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "" -"Snapmaker Orca 是基於 Bambulab 的 BambuStudio, PrusaSlicer, and SuperSlicer 開發" +msgstr "Snapmaker Orca 是基於 BambuStudio, PrusaSlicer, 與 SuperSlicer 的開發。" -#, fuzzy msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." msgstr "BambuStudio 最初是基於 PrusaResearch 的 PrusaSlicer。" @@ -2774,7 +3091,7 @@ msgstr "PrusaSlicer 最初是基於 Alessandro Ranellucci 的 Slic3r。" msgid "" "Slic3r was created by Alessandro Ranellucci with the help of many other " "contributors." -msgstr "Slic3r 由 Alessandro Ranellucci 在其他眾多貢獻者的幫助下創建。" +msgstr "Slic3r 由 Alessandro Ranellucci 在其他眾多貢獻者的幫助下建立。" msgid "Version" msgstr "版本" @@ -2788,13 +3105,12 @@ msgstr "確定" msgid "Close" msgstr "關閉" -msgid "Colour" -msgstr "顏色" - msgid "" "Nozzle\n" "Temperature" -msgstr "噴嘴溫度" +msgstr "" +"噴嘴\n" +"溫度" msgid "max" msgstr "最大" @@ -2809,14 +3125,11 @@ msgstr "輸入的範圍在 %1% 和 %2% 之間" msgid "SN" msgstr "序號" -msgid "Setting AMS slot information while printing is not supported" -msgstr "不支援在列印時修改 AMS 槽位資訊" - msgid "Factors of Flow Dynamics Calibration" -msgstr "動態流量係數校準" +msgstr "動態流量係數校正" msgid "PA Profile" -msgstr "PA 配置檔" +msgstr "PA 設定檔" msgid "Factor K" msgstr "係數 K" @@ -2824,6 +3137,9 @@ msgstr "係數 K" msgid "Factor N" msgstr "係數 N" +msgid "Setting AMS slot information while printing is not supported" +msgstr "不支援在列印時修改 AMS 槽位資訊" + msgid "Setting Virtual slot information while printing is not supported" msgstr "不支援在列印時設定虛擬槽位資訊" @@ -2835,12 +3151,21 @@ msgstr "您需要先選擇線材類型和顏色。" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "" +msgstr "請輸入有效的數值 (K於 %.1f~%.1f 之間)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" +msgstr "請輸入有效的數值 (K於 %.1f~%.1f 之間，N於 %.1f~%.1f 之間)" + +msgid "" +"The nozzle flow is not set. Please set the nozzle flow rate before editing " +"the filament.\n" +"'Device -> Print parts'" msgstr "" +msgid "AMS" +msgstr "AMS" + msgid "Other Color" msgstr "其他顏色" @@ -2848,20 +3173,19 @@ msgid "Custom Color" msgstr "自訂顏色" msgid "Dynamic flow calibration" -msgstr "動態流量校準" +msgstr "動態流量校正" msgid "" "The nozzle temp and max volumetric speed will affect the calibration " "results. Please fill in the same values as the actual printing. They can be " "auto-filled by selecting a filament preset." msgstr "" -"噴嘴溫度和最大體積速度會影響到校準結果，請填寫與實際列印相同的數值。可通過選" +"噴嘴溫度和最大體積速度會影響到校正結果，請填寫與實際列印相同的數值。可通過選" "擇已有的材料預設來自動填寫。" msgid "Nozzle Diameter" msgstr "噴嘴直徑" -#, fuzzy msgid "Bed Type" msgstr "列印板類型" @@ -2874,28 +3198,21 @@ msgstr "熱床溫度" msgid "Max volumetric speed" msgstr "最大體積速度" -msgid "℃" -msgstr "" - msgid "Bed temperature" msgstr "床溫" -msgid "mm³" -msgstr "mm³" - msgid "Start calibration" msgstr "開始" msgid "Next" msgstr "下一步" -#, fuzzy msgid "" "Calibration completed. Please find the most uniform extrusion line on your " "hot bed like the picture below, and fill the value on its left side into the " "factor K input box." msgstr "" -"校準完成。如下圖中的範例，請在您的熱床上找到最均勻完整的擠出線，並將其左側的" +"校正完成。如下圖中的範例，請在您的熱床上找到最均勻完整的擠出線，並將其左側的" "數值填入係數 K 欄位。" msgid "Save" @@ -2909,57 +3226,119 @@ msgstr "範例" #, c-format, boost-format msgid "Calibrating... %d%%" -msgstr "校準中... %d%%" +msgstr "校正中... %d%%" msgid "Calibration completed" -msgstr "校準已完成" +msgstr "校正已完成" #, c-format, boost-format msgid "%s does not support %s" msgstr "%s 不支援 %s" msgid "Dynamic flow Calibration" -msgstr "動態流量校準" +msgstr "動態流量校正" msgid "Step" msgstr "步驟" +msgid "Unmapped" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: The filament from original project will be used when " +"unmapped.\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you can click it to modify" +msgstr "" + +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "AMS Slots" msgstr "AMS 槽內線材" -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "僅允許選擇放入同種材質線材的 AMS 槽位" +msgid "Please select from the following filaments" +msgstr "" + +msgid "Select filament that installed to the left nozzle" +msgstr "" + +msgid "Select filament that installed to the right nozzle" +msgstr "" + +msgid "Left AMS" +msgstr "左側 AMS" + +msgid "External" +msgstr "外部" + +msgid "Reset current filament mapping" +msgstr "" + +msgid "Right AMS" +msgstr "右側 AMS" + +msgid "Left Nozzle" +msgstr "" + +msgid "Right Nozzle" +msgstr "" + +msgid "Nozzle" +msgstr "噴嘴" + +msgid "Ext" +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the filament type(%s) does not match with the filament type(%s) in the " +"slicing file. If you want to use this slot, you can install %s instead of %s " +"and change slot information on the 'Device' page." +msgstr "" + +#, c-format, boost-format +msgid "" +"Note: the slot is empty or undefined. If you want to use this slot, you can " +"install %s and change slot information on the 'Device' page." +msgstr "" + +msgid "Note: Only filament-loaded slots can be selected." +msgstr "" -#, fuzzy msgid "Enable AMS" msgstr "使用 AMS" -#, fuzzy msgid "Print with filaments in the AMS" msgstr "使用 AMS 裡的線材列印" -#, fuzzy msgid "Disable AMS" msgstr "停用 AMS" msgid "Print with the filament mounted on the back of chassis" msgstr "使用機箱背後掛載的線材列印" -msgid "Current Cabin humidity" -msgstr "" - msgid "" "Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " +"represent accurately in following cases: when the lid is open or the " +"desiccant pack is changed. It take hours to absorb the moisture, and low " "temperatures also slow down the process." msgstr "" +"當乾燥劑過濕時，請更換乾燥劑。在以下情況下，指示器可能無法準確顯示：當蓋子打" +"開或更換乾燥劑包時。吸收濕氣需要數小時，低溫會進一步減緩此過程。" -#, fuzzy msgid "" -"Config which AMS slot should be used for a filament used in the print job" -msgstr "設定列印作業中所使用的線材應使用哪個 AMS 插槽" +"Configure which AMS slot should be used for a filament used in the print job." +msgstr "設定列印作業中所使用的線材應使用哪個 AMS 槽" msgid "Filament used in this print job" msgstr "目前列印作業中使用的線材" @@ -2976,47 +3355,55 @@ msgstr "不使用 AMS" msgid "Print using materials mounted on the back of the case" msgstr "使用安裝在機箱背面的線材進行列印" -#, fuzzy -msgid "Print with filaments in ams" +msgid "Print with filaments in AMS" msgstr "使用 AMS 裡的線材列印" -#, fuzzy msgid "Print with filaments mounted on the back of the chassis" -msgstr "使用掛載在機箱背部的線材列印" +msgstr "使用掛在機箱背部的線材列印" + +msgid "Auto Refill" +msgstr "自動補充" + +msgid "Left" +msgstr "左面" + +msgid "Right" +msgstr "右面" -#, fuzzy msgid "" "When the current material run out, the printer will continue to print in the " "following order." msgstr "當目前線材用完時，列印設備將按照以下順序繼續列印。" +msgid "Identical filament: same brand, type and color" +msgstr "" + msgid "Group" msgstr "組" -#, fuzzy -msgid "The printer does not currently support auto refill." -msgstr "此列印設備目前不支援自動補給備用線材。" +msgid "" +"When the current material runs out, the printer would use identical filament " +"to continue printing." +msgstr "" + +msgid "The printer does not currently support auto refill." +msgstr "此列印設備目前不支援自動補料功能。" -#, fuzzy msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." -msgstr "AMS 備用線材自動補給未啟用，請在 AMS 設定中啟用。" +msgstr "AMS 線材備份功能尚未啟用，請在 AMS 設定中開啟。" -#, fuzzy msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"如果 AMS 中有兩個相同的線材，則會啟用 AMS 備用線材自動補給功能。\n" -"（目前支援同品牌、同材質、同顏色的耗材自動供應）" msgid "DRY" -msgstr "" +msgstr "乾" msgid "WET" -msgstr "" +msgstr "濕" msgid "AMS Settings" msgstr "AMS 設定" @@ -3032,9 +3419,9 @@ msgstr "" "20秒。" msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " +"Note: if a new filament is inserted during printing, the AMS will not " "automatically read any information until printing is completed." -msgstr "" +msgstr "備註：若在列印過程中插入新的線材，AMS 會等到列印完成才會讀取線材資訊。" msgid "" "When inserting a new filament, the AMS will not automatically read its " @@ -3046,14 +3433,13 @@ msgstr "" msgid "Power on update" msgstr "開機時偵測" -#, fuzzy msgid "" "The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." +"start-up. It will take about 1 minute. The reading process will roll the " +"filament spools." msgstr "" -"每次開機時，AMS 將會自動讀取其所插入的線材資訊（讀取過程會轉動線材卷）。需要" -"花時大約1分鐘。" +"每次開機時，AMS 將會自動讀取有插入的線材資訊（讀取過程會轉動線卷）。需要花費" +"大約1分鐘。" msgid "" "The AMS will not automatically read information from inserted filament " @@ -3061,52 +3447,45 @@ msgid "" "last shutdown." msgstr "AMS 不會在啟動時自動讀取線材資訊。它會使用上次關機前記錄的資訊。" -#, fuzzy msgid "Update remaining capacity" -msgstr "更新線材剩餘容量" +msgstr "更新線材剩餘量" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS 讀取 Bambu Lab 官方線材資訊同時預估線材卷的剩餘線材量。在列印過程中，剩餘" -"線材量會自動更新。" -#, fuzzy msgid "AMS filament backup" msgstr "AMS 備用線材" msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" +"AMS will continue to another spool with matching filament properties " +"automatically when current filament runs out." msgstr "AMS 線材耗盡後將自動切換到屬性完全相同的線材" msgid "Air Printing Detection" -msgstr "" +msgstr "偵測到憑空列印" msgid "" "Detects clogging and filament grinding, halting printing immediately to " "conserve time and filament." -msgstr "" +msgstr "偵測到卡料，已暫停列印來節省時間與線材。" msgid "File" msgstr "檔案" msgid "Calibration" -msgstr "校準" +msgstr "校正" -#, fuzzy msgid "" "Failed to download the plug-in. Please check your firewall settings and vpn " "software, check and retry." -msgstr "套件下載失敗。請檢查您的防火牆設定和 VPN 軟體，檢查後重試。" +msgstr "外掛程式下載失敗。請檢查您的防火牆設定和 VPN 軟體，檢查後重試。" -#, fuzzy msgid "" "Failed to install the plug-in. Please check whether it is blocked or deleted " "by anti-virus software." -msgstr "安裝套件失敗。請檢查是否被防毒軟體阻擋或刪除。" +msgstr "外掛程式安裝失敗。請檢查是否被防毒軟體阻擋或刪除。" msgid "click here to see more info" msgstr "點擊這裡查看更多資訊" @@ -3114,11 +3493,10 @@ msgstr "點擊這裡查看更多資訊" msgid "Please home all axes (click " msgstr "請先執行回原點（點擊" -#, fuzzy msgid "" ") to locate the toolhead's position. This prevents device moving beyond the " "printable boundary and causing equipment wear." -msgstr "）操作以定位目前工具頭位置，以防止軸移動時超出邊界造成設備損壞" +msgstr "）來定位工具頭的位置，這可防止設備移動超出可列印範圍，並避免設備磨損。" msgid "Go Home" msgstr "回原點" @@ -3126,19 +3504,23 @@ msgstr "回原點" msgid "" "A error occurred. Maybe memory of system is not enough or it's a bug of the " "program" -msgstr "發生錯誤。可能系統記憶體不足或者程式存在錯誤。" +msgstr "發生錯誤。可能系統記憶體不足或者程式存在錯誤" -msgid "Please save project and restart the program. " +#, boost-format +msgid "A fatal error occurred: \"%1%\"" +msgstr "發生了致命錯誤：「%1%」" + +msgid "Please save project and restart the program." msgstr "請儲存專案項目並重啟程式。" -msgid "Processing G-Code from Previous file..." +msgid "Processing G-code from Previous file..." msgstr "從之前的檔案載入 G-Code..." msgid "Slicing complete" msgstr "切片完成" msgid "Access violation" -msgstr "非法訪問" +msgstr "非法存取" msgid "Illegal instruction" msgstr "非法指令" @@ -3162,9 +3544,9 @@ msgid "Running post-processing scripts" msgstr "執行後處理腳本" msgid "Successfully executed post-processing script" -msgstr "" +msgstr "完成執行後處理腳本" -msgid "Unknown error occured during exporting G-code." +msgid "Unknown error occurred during exporting G-code." msgstr "匯出 G-code 期間發生未知錯誤。" #, boost-format @@ -3183,14 +3565,14 @@ msgid "" "device. The corrupted output G-code is at %1%.tmp." msgstr "" "將臨時 G-code 複製到輸出 G-code 時失敗。目標設備可能存在問題，請嘗試再次匯出" -"或使用不同的設備。損壞的G-code 已輸出為%1%.tmp。" +"或使用不同的設備。損壞的 G-code 已輸出為 %1%.tmp。" #, boost-format msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" -"複製到選取之目標檔案夾的 G-code 重命名失敗。當前路徑為%1%.tmp。請再試看看匯" +"複製到選取之目標檔案夾的 G-code 重命名失敗。目前路徑為 %1%.tmp。請再試看看匯" "出。" #, boost-format @@ -3198,258 +3580,40 @@ msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"臨時 G-code 的 複製已完成，但原始 G-code 因%1%在複製檢查期間無法打開。輸出 G-" -"code 為%2%.tmp。" +"臨時 G-code 的複製已完成，但原始 G-code 因 %1% 在複製檢查期間無法打開。輸出 " +"G-code 為%2%.tmp。" #, boost-format msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"臨時 G-code 的複制已完成，但匯出的 G-code 無法在復製檢查過程中打開。輸出 G-" -"code 為%1%.tmp。" +"臨時 G-code 的複製已完成，但匯出的 G-code 無法在複製檢查過程中打開。輸出 G-" +"code 為 %1%.tmp。" #, boost-format msgid "G-code file exported to %1%" msgstr "G-code 檔案已匯出為 %1%" -msgid "Unknown error when export G-code." +msgid "Unknown error when exporting G-code." msgstr "匯出 G-code 檔案發生未知錯誤。" #, boost-format msgid "" -"Failed to save gcode file.\n" +"Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" "無法儲存 G-code 檔案。\n" "錯誤資訊：%1%。\n" -"原始檔 %2%." +"原始檔 %2%。" msgid "Copying of the temporary G-code to the output G-code failed" msgstr "將臨時 G-Code 複製到輸出 G-Code 失敗" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "計劃上傳到 `%1%`。請參閱視窗-> 列印設備上傳隊列" - -msgid "Device" -msgstr "設備" - -msgid "Task Sending" -msgstr "" - -msgid "Task Sent" -msgstr "" - -msgid "Edit multiple printers" -msgstr "" - -msgid "Select connected printers (0/6)" -msgstr "" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "" - -msgid "Offline" -msgstr "離線" - -msgid "No task" -msgstr "" - -msgid "View" -msgstr "視角" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "" - -msgid "Device Name" -msgstr "" - -msgid "Task Name" -msgstr "" - -msgid "Device Status" -msgstr "" - -msgid "Actions" -msgstr "" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "" - -msgid "Add" -msgstr "新增" - -msgid "Idle" -msgstr "閒置" - -msgid "Printing" -msgstr "列印中" - -msgid "Upgrading" -msgstr "" - -msgid "Incompatible" -msgstr "不相容的預設" - -msgid "syncing" -msgstr "" - -msgid "Printing Finish" -msgstr "" - -msgid "Printing Failed" -msgstr "" - -msgid "Printing Pause" -msgstr "" - -msgid "Prepare" -msgstr "準備" - -#, fuzzy -msgid "Slicing" -msgstr "正在切片中" - -msgid "Pending" -msgstr "" - -msgid "Sending" -msgstr "" - -msgid "Sending Finish" -msgstr "" - -msgid "Sending Cancel" -msgstr "" - -msgid "Sending Failed" -msgstr "" - -msgid "Print Success" -msgstr "" - -msgid "Print Failed" -msgstr "" - -msgid "Removed" -msgstr "" - -msgid "Resume" -msgstr "繼續" - -msgid "Stop" -msgstr "停止" - -msgid "Task Status" -msgstr "" - -msgid "Sent Time" -msgstr "" - -msgid "There are no tasks to be sent!" -msgstr "" - -msgid "No historical tasks!" -msgstr "" - -msgid "Loading..." -msgstr "正在載入影片……" - -msgid "No AMS" -msgstr "" - -msgid "Send to Multi-device" -msgstr "" - -msgid "Preparing print job" -msgstr "正在準備列印作業" - -#, fuzzy -msgid "Abnormal print file data. Please slice again" -msgstr "列印檔案資料異常，請重新切片" - -msgid "There is no device available to send printing." -msgstr "" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "" - -msgid "Use External Spool" -msgstr "" - -msgid "Use AMS" -msgstr "" - -msgid "Select Printers" -msgstr "" - -msgid "Ams Status" -msgstr "" - -msgid "Printing Options" -msgstr "" - -msgid "Bed Leveling" -msgstr "熱床調平" - -msgid "Timelapse" -msgstr "縮時攝影" - -msgid "Flow Dynamic Calibration" -msgstr "" - -msgid "Send Options" -msgstr "" - -msgid "Send to" -msgstr "" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "" - -msgid "Wait" -msgstr "等待" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "" - -msgid "Send" -msgstr "傳送" - -msgid "Name is invalid;" -msgstr "無效名稱；" - -msgid "illegal characters:" -msgstr "非法字元：" - -msgid "illegal suffix:" -msgstr "非法後綴：" - -msgid "The name is not allowed to be empty." -msgstr "名稱不允許為空。" - -msgid "The name is not allowed to start with space character." -msgstr "名稱不允許以空格開頭。" - -msgid "The name is not allowed to end with space character." -msgstr "名稱不允許以空格結尾。" - -msgid "The name length exceeds the limit." -msgstr "名稱長度超過限制。" +msgstr "計劃上傳到 `%1%`。請參閱視窗-> 列印設備上傳佇列" msgid "Origin" msgstr "原點" @@ -3460,13 +3624,12 @@ msgstr "矩形框在 X 和 Y 方向的尺寸。" msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." -msgstr "G-code 0,0 坐標相對於矩形框左前角的距離。" +msgstr "G-code 0,0 座標相對於矩形框左前角的距離。" -#, fuzzy msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." -msgstr "熱床直徑。假定原點（0,0） 位於中心。" +msgstr "列印平臺的直徑，假設原點 (0,0) 位於中央位置。" msgid "Rectangular" msgstr "矩形" @@ -3502,35 +3665,36 @@ msgid "Error! Invalid model" msgstr "錯誤！無效模型" msgid "The selected file contains no geometry." -msgstr "所選檔案不包含任何幾何數據。" +msgstr "所選檔案不包含任何幾何資料。" msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "所選檔案包含多個未連接的區域。不支援這種類型。" -#, fuzzy msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "選擇（PNG/SVG） 檔案作為熱床紋理：" +msgstr "選擇（PNG/SVG）檔案作為熱床紋理：" -#, fuzzy msgid "Choose an STL file to import bed model from:" msgstr "選擇 STL 檔案來匯入熱床模型：" msgid "Bed Shape" msgstr "熱床形狀" -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" +#, c-format, boost-format +msgid "A minimum temperature above %d℃ is recommended for %s.\n" +msgstr "" + +#, c-format, boost-format +msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" msgid "" "The recommended minimum temperature cannot be higher than the recommended " "maximum temperature.\n" -msgstr "" +msgstr "推薦的最小溫度不能高於推薦的最大溫度。\n" msgid "Please check.\n" -msgstr "" +msgstr "請檢查。\n" msgid "" "Nozzle may be blocked when the temperature is out of recommended range.\n" @@ -3543,52 +3707,48 @@ msgstr "" #, c-format, boost-format msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" -msgstr "該線材的推薦噴嘴溫度是攝氏[%d, %d]度" +"The recommended nozzle temperature for this filament type is [%d, %d] " +"degrees Celsius." +msgstr "該線材的推薦噴嘴溫度是攝氏 [%d, %d] 度" msgid "" "Too small max volumetric speed.\n" -"Reset to 0.5" +"Reset to 0.5." msgstr "" "最大體積速度設定過小\n" "重設為 0.5" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " +"Current chamber temperature is higher than the material's safe temperature, " +"this may result in material softening and clogging. The maximum safe " "temperature for the material is %d" msgstr "" -"目前列印設備內部溫高於線材的安全溫度，可能會導致線材軟化和堵塞。線材的最高安" -"全溫度為：%d" +"目前列印設備內部溫度高於線材的安全溫度，可能會導致線材軟化和堵塞。線材的最高" +"安全溫度為：%d" -#, fuzzy msgid "" "Too small layer height.\n" -"Reset to 0.2" +"Reset to 0.2." msgstr "" "層高過小。\n" -"將重設為 0.2。" +"將重設為 0.2" -#, fuzzy msgid "" "Too small ironing spacing.\n" -"Reset to 0.1" +"Reset to 0.1." msgstr "" "熨燙線距過小。\n" -"將重設為 0.1。" +"將重設為 0.1" -#, fuzzy msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" -"首層層高為無效的 0 值。\n" -"將被重設為0.2。" +"0 為無效的首層層高值。\n" +"將被重設為 0.2。" -#, fuzzy msgid "" "This setting is only used for model size tunning with small value in some " "cases.\n" @@ -3597,13 +3757,12 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"這個設定僅用於在特定場景下微調模型尺寸。\n" -"例如，當模型尺寸誤差較小，難以組裝。\n" -"對於大尺寸的調整，請使用模型縮放功能。\n" -"\n" -"這個數值將被重設為 0。" +"此設定僅用於在特定情況下對模型尺寸進行微調。\n" +"例如，當模型尺寸存在輕微誤差且難以組裝時。\n" +"如需大幅調整尺寸，請使用模型縮放功能\n" +"。\n" +"該值將會重置為 0。" -#, fuzzy msgid "" "Too large elephant foot compensation is unreasonable.\n" "If really have serious elephant foot effect, please check other settings.\n" @@ -3611,23 +3770,25 @@ msgid "" "\n" "The value will be reset to 0." msgstr "" -"過大的象腳補償是不合理的。\n" -"如果確實有嚴重的象腳效應，請檢查其他設定。\n" -"例如，是否設定了過高的床溫。\n" +"象腳補償設置過大是不合理的。如果確實有嚴重的象腳效應，請檢查其他設置。\n" +"例如，檢查床溫是否設定過高。\n" "\n" -"這個數值將被重設為 0。" +"該值將會重置為 0。" msgid "" "Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " -msgstr "" +"is set to All." +msgstr "當確保垂直外殼厚度設為『全部』時，交錯額外牆壁效果不佳。" msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable " "alternate extra wall\n" -"No - Dont use alternate extra wall" +"No - Don't use alternate extra wall" msgstr "" +"是否自動更改這些設定？\n" +"是 - 將確保垂直外殼厚度設為中等並啟用交錯額外牆壁\n" +"否 - 不使用交錯額外牆壁" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support " @@ -3636,10 +3797,10 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"擦拭塔不支援和自適應層高或支撐獨立層高。同時開啟\n" +"換料塔不支援和自適應層高或獨立支撐層高。同時開啟\n" "如何選擇？\n" -"是 - 選擇開啟擦拭塔\n" -"否 - 選擇保留自適應層高或支撐獨立層高" +"是 - 選擇開啟換料塔\n" +"否 - 選擇保留自適應層高或獨立支撐層高" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -3647,9 +3808,9 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" -"擦拭塔不支援和自適應層高同時開啟。\n" +"換料塔不支援和自適應層高同時開啟。\n" "如何選擇？\n" -"是 - 選擇開啟擦拭塔\n" +"是 - 選擇開啟換料塔\n" "否 - 選擇保留自適應層高" msgid "" @@ -3658,36 +3819,52 @@ msgid "" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" -"擦拭塔不支援和支撐獨立層高同時開啟。\n" +"換料塔不支援和獨立支撐層高同時開啟。\n" "如何選擇？\n" -"是 - 選擇開啟擦拭塔\n" -"否 - 選擇保留支撐獨立層高" - -#, fuzzy -msgid "" -"While printing by Object, the extruder may collide skirt.\n" -"Thus, reset the skirt layer to 1 to avoid that." -msgstr "逐件列印時，擠出機可能與裙邊碰撞。因此將裙邊的層數重設為 1。" +"是 - 選擇開啟換料塔\n" +"否 - 選擇保留獨立支撐層高" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" +"seam_slope_start_height 必須小於 layer_height。\n" +"重設為 0。" -#, fuzzy +#, fuzzy, c-format, boost-format msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." +"Lock depth should smaller than skin depth.\n" +"Reset to 50% of skin depth." +msgstr "" +"鎖定深度必須小於表面深度。\n" +"已重設為表面深度的 50%。" + +msgid "" +"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall " +"Generator to be enabled." +msgstr "Fuzzy Skin 的 [擠出] 與 [結合] 模式需搭配啟用 Arachne Wall 產生器。" + +msgid "" +"Change these settings automatically?\n" +"Yes - Enable Arachne Wall Generator\n" +"No - Disable Arachne Wall Generator and set [Displacement] mode of the " +"Fuzzy Skin" +msgstr "" +"要自動調整這些設定嗎？\n" +"是 - 啟用 Arachne Wall 產生器\n" +"否 - 關閉 Arachne Wall 產生器，並將 Fuzzy Skin 設定為 [位移] 模式" + +msgid "" +"Spiral mode only works when wall loops is 1, support is disabled, clumping " +"detection by probing is disabled, top shell layers is 0, sparse infill " +"density is 0 and timelapse type is traditional." msgstr "" -"花瓶模式只能在外牆層數為 1，關閉支撐，頂層層數為 0，稀疏填充密度為 0，傳統縮" -"時攝影時有效。" msgid " But machines with I3 structure will not generate timelapse videos." -msgstr "I3 結構機型將不產生縮時攝影。" +msgstr " 但採用 I3 結構的機器無法產生延時影片。" -#, fuzzy msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" @@ -3695,14 +3872,17 @@ msgstr "" "是 - 自動調整這些設定並開啟花瓶模式\n" "否 - 不使用花瓶模式" +msgid "Printing" +msgstr "列印中" + msgid "Auto bed leveling" msgstr "熱床自動調平" msgid "Heatbed preheating" msgstr "預熱熱床" -msgid "Sweeping XY mech mode" -msgstr "掃描 XY 軸機械模態" +msgid "Vibration compensation" +msgstr "共振補償" msgid "Changing filament" msgstr "更換線材" @@ -3710,19 +3890,18 @@ msgstr "更換線材" msgid "M400 pause" msgstr "M400 暫停" -msgid "Paused due to filament runout" -msgstr "斷料暫停" +msgid "Paused (filament ran out)" +msgstr "" -msgid "Heating hotend" -msgstr "加熱熱端" +msgid "Heating nozzle" +msgstr "" -msgid "Calibrating extrusion" -msgstr "校準擠出補償" +msgid "Calibrating dynamic flow" +msgstr "" msgid "Scanning bed surface" msgstr "掃描熱床" -#, fuzzy msgid "Inspecting first layer" msgstr "檢查首層" @@ -3730,7 +3909,7 @@ msgid "Identifying build plate type" msgstr "識別列印板類型" msgid "Calibrating Micro Lidar" -msgstr "校準微型雷射雷達" +msgstr "校正微型雷射雷達" msgid "Homing toolhead" msgstr "工具頭回到起始點" @@ -3741,82 +3920,138 @@ msgstr "清理噴嘴頭" msgid "Checking extruder temperature" msgstr "檢查擠出溫度" -msgid "Printing was paused by the user" -msgstr "使用者暫停列印" +msgid "Paused by the user" +msgstr "" -msgid "Pause of front cover falling" -msgstr "工具頭前蓋掉落暫停列印" +msgid "Pause (front cover fall off)" +msgstr "" -msgid "Calibrating the micro lida" -msgstr "校準微型雷射雷達" +msgid "Calibrating the micro lidar" +msgstr "校正微型雷射雷達" -msgid "Calibrating extrusion flow" -msgstr "校準擠出流量" +msgid "Calibrating flow ratio" +msgstr "" -#, fuzzy -msgid "Paused due to nozzle temperature malfunction" -msgstr "噴嘴溫度異常暫停" +msgid "Pause (nozzle temperature malfunction)" +msgstr "" -msgid "Paused due to heat bed temperature malfunction" -msgstr "熱床溫度異常暫停" +msgid "Pause (heatbed temperature malfunction)" +msgstr "" msgid "Filament unloading" msgstr "退料中" -msgid "Skip step pause" -msgstr "丟步暫停" +msgid "Pause (step loss)" +msgstr "" msgid "Filament loading" msgstr "進料中" -msgid "Motor noise calibration" -msgstr "電機噪音校準" +msgid "Motor noise cancellation" +msgstr "電機噪音消除" -msgid "Paused due to AMS lost" -msgstr "由於 AMS 遺失而暫停" +msgid "Pause (AMS offline)" +msgstr "" -#, fuzzy -msgid "Paused due to low speed of the heat break fan" -msgstr "散熱風扇轉速過低導致暫停" +msgid "Pause (low speed of the heatbreak fan)" +msgstr "" -#, fuzzy -msgid "Paused due to chamber temperature control error" -msgstr "列印設備內部溫度控制錯誤導致暫停" +msgid "Pause (chamber temperature control problem)" +msgstr "" -#, fuzzy msgid "Cooling chamber" msgstr "列印設備內部溫度冷卻中" -msgid "Paused by the Gcode inserted by user" -msgstr "使用者插入的 Gcode 導致暫停" +msgid "Pause (G-code inserted by user)" +msgstr "" msgid "Motor noise showoff" msgstr "電機噪音" -msgid "Nozzle filament covered detected pause" +msgid "Pause (nozzle clumping)" msgstr "" -msgid "Cutter error pause" +msgid "Pause (cutter error)" msgstr "" -msgid "First layer error pause" +msgid "Pause (first layer error)" msgstr "" -msgid "Nozzle clog pause" +msgid "Pause (nozzle clog)" +msgstr "" + +msgid "Measuring motion precision" +msgstr "" + +msgid "Enhancing motion precision" +msgstr "" + +msgid "Measure motion accuracy" +msgstr "" + +msgid "Nozzle offset calibration" +msgstr "" + +msgid "high temperature auto bed leveling" +msgstr "" + +msgid "Auto Check: Quick Release Lever" +msgstr "" + +msgid "Auto Check: Door and Upper Cover" +msgstr "" + +msgid "Laser Calibration" +msgstr "" + +msgid "Auto Check: Platform" +msgstr "" + +msgid "Confirming BirdsEye Camera location" +msgstr "" + +msgid "Calibrating BirdsEye Camera" +msgstr "" + +msgid "Auto bed leveling -phase 1" +msgstr "" + +msgid "Auto bed leveling -phase 2" +msgstr "" + +msgid "Heating chamber" +msgstr "" + +msgid "Cooling heatbed" +msgstr "" + +msgid "Printing calibration lines" +msgstr "" + +msgid "Auto Check: Material" +msgstr "" + +msgid "Live View Camera Calibration" +msgstr "" + +msgid "Waiting for heatbed to reach target temperature" +msgstr "" + +msgid "Auto Check: Material Position" +msgstr "" + +msgid "Cutting Module Offset Calibration" +msgstr "" + +msgid "Measuring Surface" +msgstr "" + +msgid "Thermal Preconditioning for first layer optimization" msgstr "" msgid "Unknown" msgstr "未定義" -msgid "Fatal" -msgstr "致命" - -msgid "Serious" -msgstr "嚴重" - -msgid "Common" -msgstr "普通" - msgid "Update successful." msgstr "更新成功。" @@ -3829,118 +4064,189 @@ msgstr "驗證失敗。" msgid "Update failed." msgstr "更新失敗。" -#, fuzzy +msgid "Timelapse is not supported on this printer." +msgstr "" + +msgid "Timelapse is not supported while the storage does not exist." +msgstr "" + +msgid "Timelapse is not supported while the storage is unavailable." +msgstr "" + +msgid "Timelapse is not supported while the storage is readonly." +msgstr "" + +msgid "" +"To ensure your safety, certain processing tasks (such as laser) can only be " +"resumed on printer." +msgstr "" + +#, c-format, boost-format +msgid "" +"The chamber temperature is too high, which may cause the filament to soften. " +"Please wait until the chamber temperature drops below %d℃. You may open the " +"front door or enable fans to cool down." +msgstr "" + +#, c-format, boost-format +msgid "" +"AMS temperature is too high, which may cause the filament to soften. Please " +"wait until the AMS temperature drops below %d℃." +msgstr "" + msgid "" "The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/" "TPU) is not allowed to be loaded." msgstr "" -"目前設備內部溫度超過 45℃。為避免擠出機阻塞，不允許導入低溫線材（PLA / PETG / " -"TPU）。" -#, fuzzy msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to " +"avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "" -"為避免擠出機堵塞，設備內部溫度不允許設定在 45℃ 以上時將低溫線材（PLA / " -"PETG / TPU）導入擠出機中。" -#, fuzzy msgid "" "When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " +"control will not be activated, and the target chamber temperature will " "automatically be set to 0℃." msgstr "" -"當您設定的設備內部溫度低於 40℃ 時，內部溫度控制將不會啟動。 且目標溫度將自動" -"設定為 0℃。" +"當機箱溫度設置低於 40℃時，機箱溫度控制將不會啟動，並且目標機箱溫度將自動設為 " +"0℃。" -msgid "Failed to start printing job" +msgid "Failed to start print job" msgstr "無法啟動列印作業" msgid "" "This calibration does not support the currently selected nozzle diameter" -msgstr "校準不支援目前選擇的噴嘴直徑" +msgstr "校正不支援目前選擇的噴嘴直徑" msgid "Current flowrate cali param is invalid" -msgstr "目前流量校準參數無效" +msgstr "目前流量校正參數無效" -#, fuzzy msgid "Selected diameter and machine diameter do not match" msgstr "所選噴嘴直徑與設備不匹配" -msgid "Failed to generate cali gcode" -msgstr "產生校準代碼失敗" +msgid "Failed to generate cali G-code" +msgstr "產生校正代碼失敗" msgid "Calibration error" -msgstr "校準錯誤" +msgstr "校正錯誤" -msgid "TPU is not supported by AMS." -msgstr "AMS 不支援 TPU 線材。" +msgid "Resume Printing" +msgstr "繼續列印" -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "AMS 不支援 Bambu PET-CF/PA6-CF。" +msgid "Resume (defects acceptable)" +msgstr "" -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "潮濕的 PVA 會變得柔軟並黏在 AMS 內，請在使用前注意乾燥。" +msgid "Resume (problem solved)" +msgstr "" -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "含 CF/GF 線材又硬又脆，在 AMS 中很容易斷裂或卡住，請謹慎使用。" +msgid "Stop Printing" +msgstr "停止列印" + +msgid "Check Assistant" +msgstr "檢查助手" + +msgid "Filament Extruded, Continue" +msgstr "線材擠出，繼續" + +msgid "Not Extruded Yet, Retry" +msgstr "尚未擠出，重試" + +msgid "Finished, Continue" +msgstr "完成，繼續" + +msgid "Load Filament" +msgstr "進料" + +msgid "Filament Loaded, Resume" +msgstr "進料完成，繼續" + +msgid "View Liveview" +msgstr "預覽 Liveview" + +msgid "No Reminder Next Time" +msgstr "" + +msgid "Ignore. Don't Remind Next Time" +msgstr "" + +msgid "Ignore this and Resume" +msgstr "" + +msgid "Problem Solved and Resume" +msgstr "" + +msgid "Got it, Turn off the Fire Alarm." +msgstr "" + +msgid "Retry (problem solved)" +msgstr "" + +msgid "Stop Drying" +msgstr "" + +msgid "Done" +msgstr "完成" + +msgid "Retry" +msgstr "重試" + +msgid "Resume" +msgstr "繼續" + +msgid "Unknown error." +msgstr "" msgid "default" msgstr "預設" #, boost-format msgid "Edit Custom G-code (%1%)" -msgstr "" +msgstr "編輯自訂 GOCDE（%1%）" msgid "Built-in placeholders (Double click item to add to G-code)" -msgstr "" +msgstr "內建占位符（雙點擊加入GCODE）" -msgid "Search gcode placeholders" -msgstr "" +msgid "Search G-code placeholders" +msgstr "搜尋 GCODE 內的占位符" msgid "Add selected placeholder to G-code" -msgstr "" +msgstr "將占位符加到GCODE" msgid "Select placeholder" -msgstr "" +msgstr "占位符" msgid "[Global] Slicing State" -msgstr "" +msgstr "[全域]切片狀態" msgid "Read Only" -msgstr "" +msgstr "唯讀" msgid "Read Write" -msgstr "" +msgstr "讀寫" msgid "Slicing State" -msgstr "" +msgstr "切片狀態" msgid "Print Statistics" -msgstr "" +msgstr "列印統計資料" msgid "Objects Info" -msgstr "" +msgstr "物件資訊" msgid "Dimensions" -msgstr "" +msgstr "尺寸" msgid "Temperatures" msgstr "溫度" msgid "Timestamps" -msgstr "" +msgstr "時間戳記" #, boost-format msgid "Specific for %1%" -msgstr "" +msgstr "特定於 %1%" msgid "Presets" msgstr "預設" @@ -3952,9 +4258,8 @@ msgid "Filament settings" msgstr "線材設定" msgid "SLA Materials settings" -msgstr "" +msgstr "SLA 材料設定" -#, fuzzy msgid "Printer settings" msgstr "列印設備設定" @@ -3962,48 +4267,65 @@ msgid "parameter name" msgstr "參數名稱" #, c-format, boost-format -msgid "%s can't be percentage" +msgid "%s can't be a percentage" msgstr "%s 不可以是百分比" #, c-format, boost-format msgid "Value %s is out of range, continue?" -msgstr "值 %s 超出範圍，是否繼續？" +msgstr "數值 %s 超出範圍，是否繼續？" msgid "Parameter validation" msgstr "參數驗證" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "" +msgstr "數值 %s 超出範圍。有效範圍是從 %d 到 %d。" msgid "Value is out of range." -msgstr "值超出範圍。" +msgstr "數值超出範圍。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." msgstr "" -"%s%% 還是 %s %s？\n" -"是：%s%%\n" -"否：%s %s" +"是 %s%% 還是 %s %s？\n" +"選『是』代表 %s%%，\n" +"選『否』代表 %s %s。" #, boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" -msgstr "輸入格式無效。預期向量應使用以下格式：“%1%”" +msgstr "輸入格式無效。預期的向量尺寸格式應為：「%1%」" msgid "Input value is out of range" msgstr "輸入值超出範圍" msgid "Some extension in the input is invalid" +msgstr "輸入的副檔名無效" + +msgid "This parameter expects a valid template." +msgstr "此參數必須對應一個有效的範本" + +msgid "" +"Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per " +"entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "" -#, fuzzy, boost-format +#, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "無效格式，應該是 \"%1%\" 這種格式" +msgstr "無效格式，應該是「%1%」這種格式" + +msgid "N/A" +msgstr "N/A" + +msgid "Pick" +msgstr "選取" + +msgid "Summary" +msgstr "" msgid "Layer Height" msgstr "層高" @@ -4014,9 +4336,6 @@ msgstr "線寬" msgid "Fan Speed" msgstr "風扇速度" -msgid "Temperature" -msgstr "溫度" - msgid "Flow" msgstr "流量" @@ -4026,61 +4345,50 @@ msgstr "工具" msgid "Layer Time" msgstr "層時間" -#, fuzzy msgid "Layer Time (log)" msgstr "層時間（對數）" -#, fuzzy msgid "Height: " msgstr "層高：" -#, fuzzy msgid "Width: " msgstr "線寬：" -#, fuzzy msgid "Speed: " msgstr "速度：" -#, fuzzy msgid "Flow: " msgstr "擠出流量：" -#, fuzzy msgid "Layer Time: " msgstr "層時間：" -#, fuzzy msgid "Fan: " msgstr "風扇速度：" -#, fuzzy msgid "Temperature: " msgstr "溫度：" -#, fuzzy -msgid "Loading G-codes" +msgid "Loading G-code" msgstr "載入 G-code 中" msgid "Generating geometry vertex data" -msgstr "正在產生幾何頂點數據" +msgstr "正在產生幾何頂點資料" msgid "Generating geometry index data" -msgstr "正在產生幾何索引數據" +msgstr "正在產生幾何索引資料" -#, fuzzy msgid "Statistics of All Plates" -msgstr "所有列印板切片資訊" +msgstr "所有列印板統計資料" msgid "Display" msgstr "顯示" -#, fuzzy msgid "Flushed" msgstr "廢料" msgid "Tower" -msgstr "" +msgstr "塔" msgid "Total" msgstr "總計" @@ -4094,6 +4402,72 @@ msgstr "總時間" msgid "Total cost" msgstr "總成本" +msgid "" +"Automatically re-slice according to the optimal filament grouping, and the " +"grouping results will be displayed after slicing." +msgstr "" + +msgid "Filament Grouping" +msgstr "" + +msgid "Why this grouping" +msgstr "" + +msgid "Left nozzle" +msgstr "" + +msgid "Right nozzle" +msgstr "" + +msgid "Please place filaments on the printer based on grouping result." +msgstr "" + +msgid "Tips:" +msgstr "提示：" + +msgid "Current grouping of slice result is not optimal." +msgstr "" + +#, boost-format +msgid "Increase %1%g filament and %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to optimal grouping." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and %2% changes compared to a printer with one nozzle." +msgstr "" + +#, boost-format +msgid "" +"Save %1%g filament and increase %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +#, boost-format +msgid "" +"Increase %1%g filament and save %2% changes compared to a printer with one " +"nozzle." +msgstr "" + +msgid "Set to Optimal" +msgstr "" + +msgid "Regroup filament" +msgstr "" + +msgid "Tips" +msgstr "提示" + msgid "up to" msgstr "達到" @@ -4103,27 +4477,18 @@ msgstr "高於" msgid "from" msgstr "從" -msgid "Color Scheme" -msgstr "顏色方案" - msgid "Time" msgstr "時間" -msgid "Percent" -msgstr "百分比" +msgid "Usage" +msgstr "" -msgid "Used filament" -msgstr "使用的線材" - -#, fuzzy msgid "Layer Height (mm)" msgstr "層高（mm）" -#, fuzzy msgid "Line Width (mm)" -msgstr "線寬{mm）" +msgstr "線寬（mm）" -#, fuzzy msgid "Speed (mm/s)" msgstr "速度（mm/s）" @@ -4133,9 +4498,8 @@ msgstr "風扇速度（%）" msgid "Temperature (°C)" msgstr "溫度（℃）" -#, fuzzy msgid "Volumetric flow rate (mm³/s)" -msgstr "體積流量速度（mm³/s）" +msgstr "體積流量（mm³/s）" msgid "Travel" msgstr "空駛" @@ -4164,26 +4528,22 @@ msgstr "空駛" msgid "Extruder" msgstr "擠出機" -msgid "Filament change times" -msgstr "更換線材次數" - msgid "Cost" msgstr "成本" +msgid "Filament change times" +msgstr "更換線材次數" + msgid "Color change" msgstr "顏色更換" msgid "Print" msgstr "列印" -#, fuzzy msgid "Printer" msgstr "列印設備" -msgid "Custom g-code" -msgstr "" - -msgid "ToolChange" +msgid "Tool Change" msgstr "" msgid "Time Estimation" @@ -4193,10 +4553,10 @@ msgid "Normal mode" msgstr "普通模式" msgid "Total Filament" -msgstr "" +msgstr "總線材量" msgid "Model Filament" -msgstr "" +msgstr "模型線材量" msgid "Prepare time" msgstr "準備時間" @@ -4210,6 +4570,19 @@ msgstr "切換到靜音模式" msgid "Switch to normal mode" msgstr "切換到普通模式" +msgid "" +"An object is placed in the left/right nozzle-only area or exceeds the " +"printable height of the left nozzle.\n" +"Please ensure the filaments used by this object are not arranged to other " +"nozzles." +msgstr "" + +msgid "" +"An object is laid over the boundary of plate or exceeds the height limit.\n" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume." +msgstr "" + msgid "Variable layer height" msgstr "可變層高" @@ -4228,27 +4601,15 @@ msgstr "半徑" msgid "Keep min" msgstr "保留最小" -msgid "Left mouse button:" -msgstr "滑鼠左鍵：" - msgid "Add detail" msgstr "減小層高" -msgid "Right mouse button:" -msgstr "滑鼠右鍵：" - msgid "Remove detail" msgstr "增大層高" -msgid "Shift + Left mouse button:" -msgstr "Shift + 滑鼠左鍵：" - msgid "Reset to base" msgstr "設定到基礎層高" -msgid "Shift + Right mouse button:" -msgstr "Shift + 滑鼠右鍵：" - msgid "Smoothing" msgstr "平滑" @@ -4261,6 +4622,55 @@ msgstr "增加/減小編輯區域" msgid "Sequence" msgstr "順序" +msgid "object selection" +msgstr "" + +msgid "part selection" +msgstr "" + +msgid "number keys" +msgstr "" + +msgid "number keys can quickly change the color of objects" +msgstr "" + +msgid "" +"Following objects are laid over the boundary of plate or exceeds the height " +"limit:\n" +msgstr "" + +msgid "" +"Please solve the problem by moving it totally on or off the plate, and " +"confirming that the height is within the build volume.\n" +msgstr "" + +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + +#, c-format, boost-format +msgid "The position or size of some models exceeds the %s's printable range." +msgstr "" + +#, c-format, boost-format +msgid "The position or size of the model %s exceeds the %s's printable range." +msgstr "" + +msgid "" +" Please check and adjust the part's position or size to fit the printable " +"range:\n" +msgstr "" + +#, boost-format +msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" +msgstr "" + +#, boost-format +msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" +msgstr "" + msgid "Mirror Object" msgstr "鏡像物體" @@ -4293,34 +4703,45 @@ msgid "Spacing" msgstr "間距" msgid "0 means auto spacing." -msgstr "" +msgstr "0 表示自動間距。" msgid "Auto rotate for arrangement" msgstr "自動旋轉以最佳化自動擺放效果" -#, fuzzy msgid "Allow multiple materials on same plate" msgstr "允許同一列印板中包含多種材料" msgid "Avoid extrusion calibration region" -msgstr "避開擠出校準區域" +msgstr "避開擠出校正區域" msgid "Align to Y axis" msgstr "與 Y 軸對齊" -#, fuzzy +msgctxt "Camera" +msgid "Left" +msgstr "" + +msgctxt "Camera" +msgid "Right" +msgstr "" + +msgid "Add" +msgstr "新增" + msgid "Add plate" msgstr "新增列印板" -msgid "Auto orient" -msgstr "自動定向" +msgid "Auto orient all/selected objects" +msgstr "自动定位所有/选定的对象" + +msgid "Auto orient all objects on current plate" +msgstr "自动调整当前板上的所有对象" msgid "Arrange all objects" msgstr "全域整理" -#, fuzzy msgid "Arrange objects on selected plates" -msgstr "單一列印板整理" +msgstr "在選定的列印板上排列物件" msgid "Split to objects" msgstr "拆分為物件" @@ -4331,16 +4752,33 @@ msgstr "拆分為零件" msgid "Assembly View" msgstr "組裝視角" -#, fuzzy msgid "Select Plate" msgstr "選擇列印板" +msgid "Slicing" +msgstr "正在切片中" + +msgid "Slice all" +msgstr "切片所有列印板" + +msgid "Failed" +msgstr "失敗" + +msgid "All Plates" +msgstr "" + +msgid "Stats" +msgstr "" + msgid "Assembly Return" msgstr "退出組裝視角" -msgid "return" +msgid "Return" msgstr "返回" +msgid "Toggle Axis" +msgstr "" + msgid "Paint Toolbar" msgstr "上色工具列" @@ -4353,6 +4791,9 @@ msgstr "剖面視圖" msgid "Assemble Control" msgstr "拼裝視角控制" +msgid "Selection Mode" +msgstr "" + msgid "Total Volume:" msgstr "總體積：" @@ -4367,70 +4808,106 @@ msgstr "尺寸：" #, fuzzy, c-format, boost-format msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " +"Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please " "separate the conflicted objects farther (%s <-> %s)." msgstr "" -"發現 gcode 路徑在 %d 層，高為 %.2lf mm處的衝突。請將有衝突的物件分離得更遠" +"發現 gcode 路徑在 %d 層，高為 %.2lf mm 處的衝突。請將有衝突的物件分離得更遠" "（%s <-> %s）。" -#, fuzzy -msgid "An object is layed over the boundary of plate." +msgid "An object is laid over the plate boundaries." msgstr "偵測到有物件放在列印板的邊界上。" msgid "A G-code path goes beyond the max print height." msgstr "偵測到超出列印高度的 G-code 路徑。" -msgid "A G-code path goes beyond the boundary of plate." +msgid "A G-code path goes beyond the plate boundaries." msgstr "偵測到超出熱床邊界的 G-code 路徑。" -msgid "Only the object being edit is visible." +msgid "Not support printing 2 or more TPU filaments." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable range of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filament %s is placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +#, c-format, boost-format +msgid "" +"Filaments %s are placed in the %s, but the generated G-code path exceeds the " +"printable height of the %s." +msgstr "" + +msgid "Open wiki for more information." +msgstr "" + +msgid "Only the object being edited is visible." msgstr "只有正在編輯的物件是可見的。" -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." +#, c-format, boost-format +msgid "filaments %s cannot be printed directly on the surface of this plate." +msgstr "" + +msgid "" +"PLA and PETG filaments detected in the mixture. Adjust parameters according " +"to the Wiki to ensure print quality." +msgstr "" + +msgid "The prime tower extends beyond the plate boundary." +msgstr "" + +msgid "Click Wiki for help." +msgstr "" + +msgid "Click here to regroup" msgstr "" -"物件被放置在列印板的邊界上或超過高度限制。\n" -"請將其完全移動到列印板內或列印板外，並確認高度在列印空間範圍以內來解決問題。" msgid "Calibration step selection" -msgstr "校準步驟選擇" +msgstr "校正步驟選擇" msgid "Micro lidar calibration" -msgstr "微型雷射雷達校準" +msgstr "微型雷射雷達校正" msgid "Bed leveling" msgstr "熱床調平" -msgid "Vibration compensation" -msgstr "共振補償" - -msgid "Motor noise cancellation" -msgstr "電機噪音消除" +msgid "High-temperature Heatbed Calibration" +msgstr "" msgid "Calibration program" -msgstr "校準程序" +msgstr "校正程序" msgid "" "The calibration program detects the status of your device automatically to " "minimize deviation.\n" "It keeps the device performing optimally." msgstr "" -"校準程序會自動偵測設備以最小化設備誤差。\n" -"它可以讓設備保持最佳性能。" +"校正程序會自動檢測設備狀態以最小化偏差。\n" +"它確保設備保持最佳性能。" msgid "Calibration Flow" -msgstr "校準流程" +msgstr "校正流程" msgid "Start Calibration" -msgstr "開始校準" +msgstr "開始校正" msgid "Completed" msgstr "已完成" msgid "Calibrating" -msgstr "校準中" +msgstr "校正中" msgid "No step selected" msgstr "未選擇任何步驟" @@ -4442,7 +4919,7 @@ msgid "Go Live" msgstr "開啟直播" msgid "Liveview Retry" -msgstr "" +msgstr "重新嘗試 Liveview" msgid "Resolution" msgstr "解析度" @@ -4451,38 +4928,32 @@ msgid "Enable" msgstr "開啟" msgid "Hostname or IP" -msgstr "" +msgstr "主機名稱或 IP" msgid "Custom camera source" -msgstr "" +msgstr "自訂相機來源" msgid "Show \"Live Video\" guide page." -msgstr "顯示\"直播影片\"引導" +msgstr "顯示「直播影片」引導。" -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -#, fuzzy -msgid "ConnectPrinter(LAN)" +msgid "Connect Printer (LAN)" msgstr "連接列印設備（區域網路）" -#, fuzzy msgid "Please input the printer access code:" -msgstr "請輸入列印設備訪問碼：" +msgstr "請輸入列印設備訪問代碼：" -#, fuzzy msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" +"You can find it in \"Settings > Network > Access code\"\n" +"on the printer, as shown in the figure:" +msgstr "" + +msgid "" +"You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"你可以在列印設備\"設置->網路->連接->訪問碼\"\n" -"查看，如下圖所示：" msgid "Invalid input." -msgstr "輸入無效" +msgstr "輸入無效。" msgid "New Window" msgstr "新視窗" @@ -4499,11 +4970,17 @@ msgstr "正在關閉應用程式，部分預設已修改。" msgid "Logging" msgstr "日誌" +msgid "Prepare" +msgstr "準備" + msgid "Preview" msgstr "預覽" +msgid "Device" +msgstr "設備" + msgid "Multi-device" -msgstr "" +msgstr "多臺設備" msgid "Project" msgstr "專案項目" @@ -4515,39 +4992,35 @@ msgid "No" msgstr "否" msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "將會被關閉以建立新模型，是否繼續?" +msgstr "將會被關閉以建立新模型，是否繼續？" -#, fuzzy msgid "Slice plate" msgstr "切片單一列印板" -#, fuzzy msgid "Print plate" msgstr "列印單一列印板" -#, fuzzy -msgid "Slice all" -msgstr "切片所有列印板" - msgid "Export G-code file" msgstr "匯出 G-code 檔案" -#, fuzzy +msgid "Send" +msgstr "傳送" + msgid "Export plate sliced file" msgstr "匯出單一列印板切片檔案" -#, fuzzy msgid "Export all sliced file" msgstr "匯出所有列印板切片檔案" -#, fuzzy msgid "Print all" msgstr "列印所有列印板" -#, fuzzy msgid "Send all" msgstr "傳送所有列印板" +msgid "Send to Multi-device" +msgstr "傳送給多個機台" + msgid "Keyboard Shortcuts" msgstr "快捷鍵" @@ -4580,11 +5053,7 @@ msgid "Download Models" msgstr "下載模型" msgid "Default View" -msgstr "默認視圖" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "頂部" +msgstr "預設視圖" msgid "Top View" msgstr "頂部視圖" @@ -4608,15 +5077,9 @@ msgstr "後面" msgid "Rear View" msgstr "後視圖" -msgid "Left" -msgstr "左面" - msgid "Left View" msgstr "左視圖" -msgid "Right" -msgstr "右面" - msgid "Right View" msgstr "右視圖" @@ -4632,22 +5095,18 @@ msgstr "新建一個專案項目" msgid "Open a project file" msgstr "打開專案項目" -msgid "Recent projects" -msgstr "最近的專案項目" +msgid "Recent files" +msgstr "" msgid "Save Project" msgstr "儲存專案項目" -#, fuzzy msgid "Save current project to file" msgstr "儲存目前專案項目到檔案" msgid "Save Project as" msgstr "另存專案項目為" -msgid "Shift+" -msgstr "Shift+" - msgid "Save current project as" msgstr "將目前專案項目另存為" @@ -4658,16 +5117,14 @@ msgid "Load a model" msgstr "載入模型" msgid "Import Zip Archive" -msgstr "" +msgstr "匯入壓縮檔" msgid "Load models contained within a zip archive" -msgstr "" +msgstr "載入壓縮檔中的模型" -#, fuzzy msgid "Import Configs" msgstr "匯入設定檔" -#, fuzzy msgid "Load configs" msgstr "載入設定檔" @@ -4675,36 +5132,35 @@ msgid "Import" msgstr "匯入" msgid "Export all objects as one STL" -msgstr "" +msgstr "將所有物件匯出為一個 STL 檔案" msgid "Export all objects as STLs" -msgstr "" +msgstr "將所有物件匯出為 STL 檔案" msgid "Export Generic 3MF" msgstr "匯出通用 3MF" -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "匯出不含 3mf 擴展的 3mf 檔案" +msgid "Export 3MF file without using some 3mf-extensions" +msgstr "匯出不含 3MF 擴展的 3MF 檔案" -#, fuzzy msgid "Export current sliced file" msgstr "匯出目前已切片的檔案" -#, fuzzy msgid "Export all plate sliced file" msgstr "匯出所有列印板已切片的檔案" msgid "Export G-code" msgstr "匯出 G-code" -#, fuzzy msgid "Export current plate as G-code" msgstr "匯出目前列印板的 G-code" -msgid "Export Preset Bundle" -msgstr "" +msgid "Export toolpaths as OBJ" +msgstr "將工具路徑匯出為 OBJ 格式" + +msgid "Export Preset Bundle" +msgstr "匯出設定檔組" -#, fuzzy msgid "Export current configuration to files" msgstr "匯出目前選擇的設定檔" @@ -4738,14 +5194,12 @@ msgstr "從剪貼簿貼上" msgid "Delete selected" msgstr "刪除所選項目" -#, fuzzy msgid "Deletes the current selection" msgstr "刪除目前所選項目" msgid "Delete all" msgstr "全部刪除" -#, fuzzy msgid "Deletes all objects" msgstr "刪除所有物件" @@ -4755,6 +5209,12 @@ msgstr "複製所選項目" msgid "Clone copies of selections" msgstr "複製多份所選項目" +msgid "Duplicate Current Plate" +msgstr "複製列印板" + +msgid "Duplicate the current plate" +msgstr "複製目前列印板" + msgid "Select all" msgstr "選取所有" @@ -4773,44 +5233,61 @@ msgstr "使用透視視角" msgid "Use Orthogonal View" msgstr "使用正交視角" -msgid "Show &G-code Window" -msgstr "" +msgid "Auto Perspective" +msgstr "自動視角調整" -msgid "Show g-code window in Previce scene" -msgstr "" +msgid "" +"Automatically switch between orthographic and perspective when changing from " +"top/bottom/side views." +msgstr "在切換至上、下或側視圖時，會自動在正投影和透視視圖之間切換" + +msgid "Show &G-code Window" +msgstr "顯示 G-code" + +msgid "Show G-code window in Preview scene." +msgstr "在預覽分頁中顯示 G-code 視窗" msgid "Show 3D Navigator" -msgstr "" +msgstr "顯示 3D 導覽器" -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "" +msgid "Show 3D navigator in Prepare and Preview scene." +msgstr "在準備與預覽分頁中顯示 3D 導覽器" msgid "Reset Window Layout" -msgstr "" +msgstr "重設視窗配置" msgid "Reset to default window layout" -msgstr "" +msgstr "恢復預設視窗配置" msgid "Show &Labels" msgstr "顯示名稱" -msgid "Show object labels in 3D scene" +msgid "Show object labels in 3D scene." msgstr "在 3D 場景中顯示物件名稱" msgid "Show &Overhang" msgstr "凸顯懸空" -msgid "Show object overhang highlight in 3D scene" +msgid "Show object overhang highlight in 3D scene." msgstr "在 3D 場景中凸顯懸空" +msgid "Show Selected Outline (beta)" +msgstr "顯示選取輪廓（實驗性）" + +msgid "Show outline around selected object in 3D scene." +msgstr "在 3D 場景中顯示選定物件的輪廓" + msgid "Preferences" msgstr "偏好設定" +msgid "View" +msgstr "視角" + msgid "Help" msgstr "幫助" msgid "Temperature Calibration" -msgstr "溫度校準" +msgstr "溫度校正" msgid "Pass 1" msgstr "粗調" @@ -4824,6 +5301,18 @@ msgstr "細調" msgid "Flow rate test - Pass 2" msgstr "流量測試 - 通過 2" +msgid "YOLO (Recommended)" +msgstr "YOLO (建議)" + +msgid "Orca YOLO flowrate calibration, 0.01 step" +msgstr "Orca YOLO 流量校正，0.01 步" + +msgid "YOLO (perfectionist version)" +msgstr "YOLO (完美主義者模式)" + +msgid "Orca YOLO flowrate calibration, 0.005 step" +msgstr "Orca YOLO 流量校正，0.005 步" + msgid "Flow rate" msgstr "流量" @@ -4833,27 +5322,32 @@ msgstr "壓力提前" msgid "Retraction test" msgstr "回抽測試" -msgid "Orca Tolerance Test" -msgstr "Orca 誤差測試" - msgid "Max flowrate" msgstr "最大體積流量" +msgid "Cornering" +msgstr "轉角控制" + +msgid "Cornering calibration" +msgstr "" + +msgid "Input Shaping Frequency" +msgstr "輸入震動抑制頻率" + +msgid "Input Shaping Damping/zeta factor" +msgstr "輸入震動抑制的阻尼因子（ζ 值）" + +msgid "Input Shaping" +msgstr "輸入震動補償" + msgid "VFA" msgstr "VFA" -# SoftFever -msgid "More..." -msgstr "進階校準" - msgid "Tutorial" msgstr "教學" msgid "Calibration help" -msgstr "校準幫助" - -msgid "More calibrations" -msgstr "更多校準" +msgstr "校正幫助" msgid "&Open G-code" msgstr "打開 G-code" @@ -4862,18 +5356,14 @@ msgid "Open a G-code file" msgstr "打開 G-code 檔案" msgid "Re&load from Disk" -msgstr "從磁碟重新載入" +msgstr "從硬碟重新載入" -#, fuzzy msgid "Reload the plater from disk" -msgstr "從磁碟重新載入" +msgstr "從硬碟重新載入" msgid "Export &Toolpaths as OBJ" msgstr "將工具路徑匯出為 OBJ 格式" -msgid "Export toolpaths as OBJ" -msgstr "將工具路徑匯出為 OBJ 格式" - msgid "Open &Slicer" msgstr "開啟 Studio" @@ -4897,23 +5387,24 @@ msgid "&Help" msgstr "幫助" #, fuzzy, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "有一個同名稱的檔案 %s。要覆蓋它嗎？" +msgid "A file exists with the same name: %s, do you want to overwrite it?" +msgstr "檔案名稱為 %s 的檔案已存在，是否要覆蓋它？" #, fuzzy, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "有一個同名稱的設定檔 %s。要覆蓋它嗎？" +msgid "A config exists with the same name: %s, do you want to overwrite it?" +msgstr "已存在名稱為 %s 的設定檔，是否要覆蓋它？" msgid "Overwrite file" msgstr "覆蓋檔案" -#, fuzzy +msgid "Overwrite config" +msgstr "覆蓋設定檔" + msgid "Yes to All" msgstr "全部覆蓋" -#, fuzzy msgid "No to All" -msgstr "放棄" +msgstr "全部放棄" msgid "Choose a directory" msgstr "選擇目錄" @@ -4940,6 +5431,8 @@ msgid "" "Hint: Make sure you have added the corresponding printer before importing " "the configs." msgstr "" +"\n" +"提示：在匯入設定之前，請確保已新增對應的列印設備。" msgid "Import result" msgstr "匯入結果" @@ -4953,81 +5446,81 @@ msgstr "此項目不可用。" msgid "Filament Settings" msgstr "線材設定" -#, fuzzy msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" +"Do you want to synchronize your personal data from Bambu Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" -"想從 Bambu 雲端同步你的個人數據嗎？\n" -"包含如下資訊：\n" -"1. 列印參數預設檔\n" -"2. 線材預設檔\n" -"3. 列印設備預設檔" +"從 Bambu 雲端同步您的個人資料嗎？\n" +"包含以下資訊：\n" +"1. 列印參數設定\n" +"2. 線材設定\n" +"3. 列印設備設定" msgid "Synchronization" msgstr "同步" msgid "The device cannot handle more conversations. Please retry later." -msgstr "" +msgstr "該設備無法處理更多對話。請稍後再試。" msgid "Player is malfunctioning. Please reinstall the system player." -msgstr "" +msgstr "播放器故障。請重新安裝系統播放器。" msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "" +msgstr "播放器未載入，請點擊『播放』按鈕重試。" msgid "Please confirm if the printer is connected." -msgstr "" +msgstr "請確認列印設備是否已連接。" msgid "" "The printer is currently busy downloading. Please try again after it " "finishes." -msgstr "" +msgstr "列印機目前正忙於下載。請待下載完成後再試一次。" msgid "Printer camera is malfunctioning." -msgstr "" +msgstr "列印設備攝影機故障。" -msgid "Problem occured. Please update the printer firmware and try again." -msgstr "" +msgid "A problem occurred. Please update the printer firmware and try again." +msgstr "發生問題。請更新列印設備韌體後再試一次。" msgid "" "LAN Only Liveview is off. Please turn on the liveview on printer screen." -msgstr "" +msgstr "僅 LAN 模式的 LiveView 已關閉。請在列印機螢幕上開啟 LiveView。" msgid "Please enter the IP of printer to connect." -msgstr "" +msgstr "請輸入列印設備的 IP 以進行連接。" msgid "Initializing..." -msgstr "正在初始化……" +msgstr "正在初始化..." msgid "Connection Failed. Please check the network and try again" -msgstr "" +msgstr "連線失敗。請檢查網路並重試" msgid "" -"Please check the network and try again, You can restart or update the " +"Please check the network and try again. You can restart or update the " "printer if the issue persists." -msgstr "" +msgstr "請檢查網路並重試。如果問題持續，您可以重新啟動或更新列印設備。" msgid "The printer has been logged out and cannot connect." -msgstr "" +msgstr "列印設備已登出，無法連接。" -msgid "Stopped." -msgstr "已經停止。" +msgid "Video Stopped." +msgstr "影片已停止。" msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "區域網路連接失敗（無法啟動直播）" +msgstr "區域網路連接失敗（無法啟動 Liveview）" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" -msgstr "該功能需要“虛擬攝影機工具包”，是否下載並安裝該工具包？" +msgstr "" +"執行此功能需要「虛擬攝影機工具包」！\n" +"您要安裝它們嗎？" -#, fuzzy msgid "Downloading Virtual Camera Tools" -msgstr "正在下載虛擬攝影機工具包...." +msgstr "正在下載虛擬攝影機工具包..." msgid "" "Another virtual camera is running.\n" @@ -5038,7 +5531,7 @@ msgstr "" "Snapmaker Orca 同時只能支援一個虛擬攝影機。\n" "是否停止前一個虛擬攝影機？" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "虛擬攝影機初始化失敗（%s）！" @@ -5051,6 +5544,9 @@ msgstr "資訊" msgid "Playing..." msgstr "正在播放中……" +msgid "Loading..." +msgstr "正在載入影片……" + msgid "Year" msgstr "年" @@ -5061,87 +5557,74 @@ msgid "All Files" msgstr "所有檔案" msgid "Group files by year, recent first." -msgstr "按年份分組，從最近的開始展示" +msgstr "按年份分組，從最近的開始展示。" msgid "Group files by month, recent first." -msgstr "按月份分組，從最近的開始展示" +msgstr "按月份分組，從最近的開始展示。" msgid "Show all files, recent first." -msgstr "顯示所有檔案，從最近的開始展示" +msgstr "顯示所有檔案，從最近的開始展示。" + +msgid "Timelapse" +msgstr "縮時攝影" msgid "Switch to timelapse files." -msgstr "切換到縮時攝影檔案清單" +msgstr "切換到縮時攝影檔案清單。" msgid "Video" msgstr "錄影" msgid "Switch to video files." -msgstr "切換到影片檔案清單" - -msgid "Switch to 3mf model files." -msgstr "切換到 3MF 模型檔案。" +msgstr "切換到影片檔案清單。" #, fuzzy +msgid "Switch to 3MF model files." +msgstr "切換到 3MF 模型檔案。" + msgid "Delete selected files from printer." -msgstr "從列印設備中刪除選中的檔案" +msgstr "從列印設備中刪除選中的檔案。" msgid "Download" msgstr "下載" -#, fuzzy msgid "Download selected files from printer." -msgstr "從列印設備中下載選中的檔案" +msgstr "從列印設備中下載選中的檔案。" msgid "Select" msgstr "選擇" msgid "Batch manage files." -msgstr "批次管理檔案" +msgstr "批次管理檔案。" msgid "Refresh" msgstr "刷新" msgid "Reload file list from printer." -msgstr "" +msgstr "從列印機重新載入檔案清單。" -#, fuzzy msgid "No printers." -msgstr "未選擇列印設備" - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "連接失敗 [%d]！" +msgstr "未選擇列印設備。" msgid "Loading file list..." msgstr "載入檔案清單..." msgid "No files" -msgstr "" +msgstr "無檔案" msgid "Load failed" -msgstr "" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "初始化失敗（未連接列印設備）" +msgstr "載入失敗" msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " +"Browsing file in storage is not supported in current firmware. Please update " "the printer firmware." msgstr "" -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "" - msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "" +msgstr "LAN 連線失敗（無法查看 SD 卡）。" -msgid "Browsing file in SD card is not supported in LAN Only Mode." +msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" -#, c-format, boost-format -msgid "Initialize failed (%s)!" -msgstr "初始化失敗（%s）!" - #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" @@ -5151,27 +5634,27 @@ msgstr[0] "將從列印設備中刪除 %u 個檔案。確定要繼續嗎？" msgid "Delete files" msgstr "刪除檔案" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "確定要從列印設備中刪除檔案 '%s' 嗎？" msgid "Delete file" msgstr "刪除檔案" -msgid "Fetching model infomations ..." -msgstr "正在獲取模型資訊..." +msgid "Fetching model information..." +msgstr "正在取得模型資訊..." msgid "Failed to fetch model information from printer." -msgstr "" +msgstr "無法從列印設備取得模型資訊。" msgid "Failed to parse model information." -msgstr "" +msgstr "解析模型資訊失敗。" msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Snapmaker Orca " -"and export a new .gcode.3mf file." +"The .gcode.3mf file contains no G-code data. Please slice it with Orca " +"Slicer and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 檔案中不包含 G-code 數據。請使用 Snapmaker Orca 進行切片並匯出新的." +".gcode.3mf 檔案中不包含 G-code 資料。請使用 Snapmaker Orca 進行切片並匯出新的 ." "gcode.3mf 檔案。" #, c-format, boost-format @@ -5183,6 +5666,8 @@ msgid "" "File: %s\n" "Title: %s\n" msgstr "" +"檔案：%s\n" +"標題：%s\n" msgid "Download waiting..." msgstr "等待下載中..." @@ -5200,33 +5685,70 @@ msgstr "下載完成" msgid "Downloading %d%%..." msgstr "下載中 %d%%..." +msgid "Air Condition" +msgstr "" + msgid "" "Reconnecting the printer, the operation cannot be completed immediately, " "please try again later." +msgstr "重新連接列印機，操作無法立即完成，請稍後再試。" + +msgid "Timeout, please try again." msgstr "" msgid "File does not exist." -msgstr "" +msgstr "檔案不存在。" msgid "File checksum error. Please retry." -msgstr "" +msgstr "檔案核對和錯誤。請重試。" -#, fuzzy msgid "Not supported on the current printer version." msgstr "目前列印設備的版本不支援。" -#, fuzzy -msgid "Storage unavailable, insert SD card." -msgstr "儲存不可用，請插入 SD 記憶卡。" +msgid "" +"Please check if the storage is inserted into the printer.\n" +"If it still cannot be read, you can try formatting the storage." +msgstr "" + +msgid "" +"The firmware version of the printer is too low. Please update the firmware " +"and try again." +msgstr "" + +msgid "The file already exists, do you want to replace it?" +msgstr "" + +msgid "Insufficient storage space, please clear the space and try again." +msgstr "" + +msgid "File creation failed, please try again." +msgstr "" + +msgid "File write failed, please try again." +msgstr "" + +msgid "MD5 verification failed, please try again." +msgstr "" + +msgid "File renaming failed, please try again." +msgstr "" + +msgid "File upload failed, please try again." +msgstr "" #, c-format, boost-format msgid "Error code: %d" +msgstr "錯誤代碼：%d" + +msgid "User cancels task." +msgstr "" + +msgid "Failed to read file, please try again." msgstr "" msgid "Speed:" msgstr "速度：" -#, fuzzy msgid "Deadzone:" msgstr "盲點區：" @@ -5263,11 +5785,84 @@ msgstr "反轉俯仰軸（橫軸）" msgid "Invert Roll axis" msgstr "反轉橫滾軸（縱軸）" +msgid "(LAN)" +msgstr "（區域網路）" + +msgid "Search" +msgstr "搜尋" + +msgid "My Device" +msgstr "我的設備" + +msgid "Other Device" +msgstr "其他設備" + +msgid "Online" +msgstr "在線" + +msgid "Input access code" +msgstr "輸入訪問代碼" + +msgid "Can't find my devices?" +msgstr "無法找到我的設備？" + +msgid "Log out successful." +msgstr "登出成功。" + +msgid "Offline" +msgstr "離線" + +msgid "Busy" +msgstr "忙碌" + +msgid "Modifying the device name" +msgstr "修改列印設備名稱" + +msgid "Name is invalid;" +msgstr "無效名稱；" + +msgid "illegal characters:" +msgstr "非法字元：" + +msgid "illegal suffix:" +msgstr "非法後綴：" + +msgid "The name is not allowed to be empty." +msgstr "名稱不允許為空。" + +msgid "The name is not allowed to start with space character." +msgstr "名稱不允許以空格開頭。" + +msgid "The name is not allowed to end with space character." +msgstr "名稱不允許以空格結尾。" + +msgid "The name is not allowed to exceed 32 characters." +msgstr "" + +msgid "Bind with Pin Code" +msgstr "Pin碼綁定" + +msgid "Bind with Access Code" +msgstr "透過訪問代碼綁定" + +msgctxt "Quit_Switching" +msgid "Quit" +msgstr "" + +msgid "Switching..." +msgstr "" + +msgid "Switching failed" +msgstr "" + msgid "Printing Progress" msgstr "列印進度" -msgid "0" -msgstr "0" +msgid "Parts Skip" +msgstr "" + +msgid "Stop" +msgstr "停止" msgid "Layer: N/A" msgstr "層： N/A" @@ -5283,7 +5878,6 @@ msgstr "已經完成了 MakeWorld 模型的列印，但評論資料同步失敗 msgid "How do you like this printing file?" msgstr "您覺得這個列印檔案怎麼樣？" -#, fuzzy msgid "" "(The model has already been rated. Your rating will overwrite the previous " "rating.)" @@ -5295,54 +5889,59 @@ msgstr "速率" msgid "Camera" msgstr "攝影機" -msgid "SD Card" -msgstr "SD 記憶卡" +msgid "Storage" +msgstr "儲存空間" msgid "Camera Setting" msgstr "攝影機設定" msgid "Switch Camera View" -msgstr "" +msgstr "切換相機視角" msgid "Control" msgstr "控制" msgid "Printer Parts" -msgstr "" +msgstr "列印設備零件" msgid "Print Options" msgstr "列印選項" -msgid "100%" -msgstr "100%" - msgid "Lamp" msgstr "LED 燈" -msgid "Aux" -msgstr "輔助" - -msgid "Cham" -msgstr "機箱" - msgid "Bed" -msgstr "熱床" +msgstr "列印板" msgid "Debug Info" msgstr "除錯資訊" -#, fuzzy -msgid "No SD Card" -msgstr "無 SD 記憶卡" +msgid "Filament loading..." +msgstr "" -msgid "SD Card Abnormal" -msgstr "SD 記憶卡異常" +msgid "No Storage" +msgstr "沒有可用的儲存空間" + +msgid "Storage Abnormal" +msgstr "儲存狀態異常" msgid "Cancel print" msgstr "取消列印" -msgid "Are you sure you want to cancel this print?" -msgstr "確定要取消這次列印嗎？" +msgid "Are you sure you want to stop this print?" +msgstr "" + +msgid "The printer is busy with another print job." +msgstr "列印設備正在執行其他列印作業" + +msgid "Current extruder is busy changing filament." +msgstr "" + +msgid "Current slot has already been loaded." +msgstr "" + +msgid "The selected slot is empty." +msgstr "" msgid "Downloading..." msgstr "下載中..." @@ -5350,31 +5949,30 @@ msgstr "下載中..." msgid "Cloud Slicing..." msgstr "雲端切片中..." -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "前面還有 %s 個任務在雲端切片隊列中" +msgstr "雲端切片佇列中，前面還有 %s 個檔案。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Layer: %s" msgstr "%s 層" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Layer: %d/%d" msgstr "%d/%d 層" +#, fuzzy msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." +"Please heat the nozzle to above 170°C before loading or unloading filament." +msgstr "請在上料或退料之前將噴嘴加熱至 170 度以上。" + +msgid "" +"If the chamber temperature exceeds 40℃, the system will automatically switch " +"to heating mode. Please confirm whether to switch." msgstr "" -msgid "Still unload" -msgstr "繼續退料" - -msgid "Still load" -msgstr "繼續進料" - msgid "Please select an AMS slot before calibration" -msgstr "請先選擇一個 AMS 槽位後進行校準" +msgstr "請先選擇一個 AMS 槽位後進行校正" msgid "" "Cannot read filament info: the filament is loaded to the tool head,please " @@ -5384,25 +5982,31 @@ msgstr "無法讀取線材資訊：線材已經載入到工具頭，請退出線 msgid "This only takes effect during printing" msgstr "僅在列印過程中生效" -#, fuzzy msgid "Silent" msgstr "靜音模式（50%）" -#, fuzzy msgid "Standard" msgstr "標準模式（100%）" -#, fuzzy msgid "Sport" msgstr "運動模式（125%）" -#, fuzzy msgid "Ludicrous" msgstr "狂暴模式（150%）" -#, fuzzy -msgid "Can't start this without SD card." -msgstr "沒有 SD 記憶卡無法開始任務" +msgid "" +"Turning off the lights during the task will cause the failure of AI " +"monitoring, like spaghetti detection. Please choose carefully." +msgstr "" + +msgid "Keep it On" +msgstr "" + +msgid "Turn it Off" +msgstr "" + +msgid "Can't start this without storage." +msgstr "" msgid "Rate the Print Profile" msgstr "評價列印設定檔" @@ -5425,36 +6029,34 @@ msgstr "送出" msgid "Please click on the star first." msgstr "請先點擊星星數量。" -msgid "InFo" -msgstr "資訊" - msgid "Get oss config failed." msgstr "取得 oss 設定失敗。" -msgid "Upload Pictrues" +msgid "Upload Pictures" msgstr "上傳圖片" msgid "Number of images successfully uploaded" msgstr "成功上傳的圖片數量" msgid " upload failed" -msgstr "上傳失敗" +msgstr " 上傳失敗" -#, fuzzy msgid " upload config prase failed\n" -msgstr "上傳設定檔失敗\n" +msgstr " 上傳設定檔失敗\n" msgid " No corresponding storage bucket\n" -msgstr "沒有對應的儲存區\n" +msgstr " 沒有對應的儲存區\n" -msgid " can not be opened\n" -msgstr "無法開啟\n" +msgid " cannot be opened\n" +msgstr " 無法開啟\n" msgid "" "The following issues occurred during the process of uploading images. Do you " "want to ignore them?\n" "\n" -msgstr "在上傳圖片的過程中出現了以下問題。要忽略此問題嗎？\n" +msgstr "" +"在上傳圖片的過程中出現了以下問題。要忽略此問題嗎？\n" +"\n" msgid "info" msgstr "資訊" @@ -5469,30 +6071,29 @@ msgid "obtaining instance_id failed\n" msgstr "取得 instance_id 失敗\n" msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" +"Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" "由於某些原因，您的評論結果無法上傳。如下：\n" "\n" -"錯誤代碼： " +" 錯誤代碼： " -#, fuzzy msgid "error message: " msgstr "錯誤訊息：" msgid "" "\n" "\n" -"Would you like to redirect to the webpage for rating?" +"Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" -"您想重新導向到評價網頁嗎？" +"您想要跳轉到網頁給予評分嗎？" msgid "" "Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" +"webpage to give a rating?" msgstr "您的部分圖片上傳失敗。 要重定導向評價網頁嗎？" msgid "You can select up to 16 images." @@ -5500,20 +6101,30 @@ msgstr "您最多可以選擇 16 張圖片。" msgid "" "At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." +"to give a positive rating (4 or 5 stars)." msgstr "" -"該列印設定檔至少需要一筆成功的列印記錄\n" -"給予正面評價（4 或 5 顆星）。" +"若要給予正面評價（4 或 5 星），\n" +"必須至少有一個此列印設定檔的成功列印記錄。" msgid "Status" msgstr "設備狀態" +msgctxt "Firmware" msgid "Update" -msgstr "韌體更新" +msgstr "" + +msgid "Assistant(HMS)" +msgstr "" msgid "Don't show again" msgstr "不再顯示" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s 錯誤" @@ -5541,40 +6152,65 @@ msgstr "%s 資訊" msgid "Skip" msgstr "跳過" -msgid "Newer 3mf version" -msgstr "較新的 3mf 版本" +#, fuzzy +msgid "Newer 3MF version" +msgstr "較新的 3MF 版本" +#, fuzzy msgid "" -"The 3mf file version is in Beta and it is newer than the current Snapmaker Orca " +"The 3MF file version is in Beta and it is newer than the current Snapmaker Orca " "version." -msgstr "" +msgstr "該 3MF 檔案版本為測試版，並且較目前的 Snapmaker Orca 版本更新。" msgid "If you would like to try Snapmaker Orca Beta, you may click to" -msgstr "" +msgstr "如果您想嘗試 Snapmaker Orca 測試版，可以點擊以下載到" msgid "Download Beta Version" -msgstr "" +msgstr "下載測試版" -msgid "The 3mf file version is newer than the current Snapmaker Orca version." -msgstr "" +#, fuzzy +msgid "The 3MF file version is newer than the current Snapmaker Orca version." +msgstr "該 3MF 檔案版本較目前的 Snapmaker Orca 版本更新。" -msgid "Update your Snapmaker Orca could enable all functionality in the 3mf file." -msgstr "" +#, fuzzy +msgid "Updating your Snapmaker Orca could enable all functionality in the 3MF file." +msgstr "更新您的 Snapmaker Orca 以啟用 3MF 檔案中的所有功能。" msgid "Current Version: " -msgstr "" +msgstr "目前版本：" msgid "Latest Version: " +msgstr "最新版本：" + +msgctxt "Software" +msgid "Update" msgstr "" msgid "Not for now" -msgstr "" +msgstr "現在不要" + +msgid "Server Exception" +msgstr "伺服器異常" + +msgid "" +"The server is unable to respond. Please click the link below to check the " +"server status." +msgstr "伺服器沒有回應，請點擊下方連結檢查伺服器狀態。" + +msgid "" +"If the server is in a fault state, you can temporarily use offline printing " +"or local network printing." +msgstr "若伺服器發生故障，可以暫時改用離線列印或本地網路列印。" + +msgid "How to use LAN only mode" +msgstr "如何啟用 LAN 模式" + +msgid "Don't show this dialog again" +msgstr "不要再顯示此提示" -#, fuzzy msgid "3D Mouse disconnected." msgstr "3D 滑鼠已中斷連線。" -#, fuzzy msgid "Configuration can update now." msgstr "設定檔現在可以升級。" @@ -5590,15 +6226,14 @@ msgstr "整合失敗。" msgid "Undo integration was successful." msgstr "整合取消成功。" -#, fuzzy msgid "New network plug-in available." -msgstr "新的網路套件可用。" +msgstr "網路外掛程式有可用的更新。" msgid "Details" msgstr "詳細" msgid "New printer config available." -msgstr "" +msgstr "有新的列印機設定可用。" msgid "Wiki" msgstr "Wiki" @@ -5633,8 +6268,13 @@ msgstr[0] "%1$d 物件有上色。" #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "%1$d 物件載入為一個切割物件的子零件" +msgid_plural "%1$d objects were loaded as parts of cut object." +msgstr[0] "%1$d 物件載入為一個切割物件的子零件。" + +#, c-format, boost-format +msgid "%1$d object was loaded with fuzzy skin painting." +msgid_plural "%1$d objects were loaded with fuzzy skin painting." +msgstr[0] "" msgid "ERROR" msgstr "錯誤" @@ -5649,7 +6289,7 @@ msgid "Cancel upload" msgstr "取消上傳" msgid "Jump to" -msgstr "轉換到" +msgstr "跳至" msgid "Error:" msgstr "錯誤：" @@ -5657,8 +6297,7 @@ msgstr "錯誤：" msgid "Warning:" msgstr "警告：" -#, fuzzy -msgid "Export successfully." +msgid "Exported successfully" msgstr "匯出成功。" msgid "Model file downloaded." @@ -5671,21 +6310,21 @@ msgid " (Repair)" msgstr "（修復）" msgid " Click here to install it." -msgstr "點擊此處安裝" +msgstr "點擊此處安裝。" msgid "WARNING:" msgstr "警告：" -msgid "Your model needs support ! Please make support material enable." -msgstr "你的模型需要支撐才能列印。請開啟支撐選項。" +msgid "Your model needs support! Please enable support material." +msgstr "您的模型需要支撐才能列印。請開啟支撐選項。" -msgid "Gcode path overlap" -msgstr "Gcode 路徑有重疊" +#, fuzzy +msgid "G-code path overlap" +msgstr "G-code 路徑有重疊" msgid "Support painting" msgstr "支撐繪製" -#, fuzzy msgid "Color painting" msgstr "上色" @@ -5701,19 +6340,21 @@ msgstr "範圍" msgid "" "The application cannot run normally because OpenGL version is lower than " "2.0.\n" -msgstr "應用程式無法正常運行，因為 OpenGL 的版本低於 2.0。\n" +msgstr "應用程式無法正常執行，因為 OpenGL 的版本低於 2.0。\n" msgid "Please upgrade your graphics card driver." -msgstr "請升級您的顯示卡驅動。" +msgstr "請升級您的顯示卡驅動程式。" msgid "Unsupported OpenGL version" msgstr "不支援的 OpenGL 版本" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" -msgstr "無法載入 Shader： %s" +msgstr "" +"無法載入 Shader：\n" +"%s" msgid "Error loading shaders" msgstr "載入 shader 程序時發生錯誤" @@ -5726,12 +6367,6 @@ msgctxt "Layers" msgid "Bottom" msgstr "底部" -msgid "Enable AI monitoring of printing" -msgstr "啟用列印過程的 AI 智慧監控" - -msgid "Sensitivity of pausing is" -msgstr "暫停的靈敏度為" - msgid "Enable detection of build plate position" msgstr "啟用列印板位置偵測" @@ -5740,88 +6375,179 @@ msgid "" "the tag is not in predefined range." msgstr "偵測列印板的定位標記，如果標記不在預定義範圍內時暫停列印。" -#, fuzzy +msgid "Build Plate Detection" +msgstr "" + +msgid "" +"Identifies the type and position of the build plate on the heatbed. Pausing " +"printing if a mismatch is detected." +msgstr "" + +msgid "AI Detections" +msgstr "" + +msgid "" +"Printer will send assistant message or pause printing if any of the " +"following problem is detected." +msgstr "" + +msgid "Enable AI monitoring of printing" +msgstr "啟用列印過程的 AI 智慧監控" + +msgid "Pausing Sensitivity:" +msgstr "" + +msgid "Spaghetti Detection" +msgstr "" + +msgid "Detect spaghetti failure(scattered lose filament)." +msgstr "" + +msgid "Purge Chute Pile-Up Detection" +msgstr "" + +msgid "Monitor if the waste is piled up in the purge chute." +msgstr "" + +msgid "Nozzle Clumping Detection" +msgstr "噴嘴堵塞偵測" + +msgid "Check if the nozzle is clumping by filaments or other foreign objects." +msgstr "" + +msgid "Detects air printing caused by nozzle clogging or filament grinding." +msgstr "" + msgid "First Layer Inspection" msgstr "首層檢查" msgid "Auto-recovery from step loss" msgstr "自動從丟步中恢復" +msgid "Open Door Detection" +msgstr "" + +msgid "Notification" +msgstr "" + +msgid "Pause printing" +msgstr "" + +msgid "Store Sent Files on External Storage" +msgstr "" + +msgid "" +"Save the printing files initiated from Bambu Studio, Bambu Handy and " +"MakerWorld on External Storage" +msgstr "" + msgid "Allow Prompt Sound" msgstr "允許提示音效" msgid "Filament Tangle Detect" -msgstr "" - -msgid "Nozzle Clumping Detection" -msgstr "" +msgstr "線材打結偵測" msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "" +msgstr "檢查噴嘴是否因線材或其他異物而堵塞。" msgid "Nozzle Type" +msgstr "噴嘴類型" + +msgid "Nozzle Flow" msgstr "" -msgid "Stainless Steel" +msgid "Please change the nozzle settings on the printer." +msgstr "" + +msgid "View wiki" msgstr "" msgid "Hardened Steel" +msgstr "硬化鋼" + +msgid "Stainless Steel" +msgstr "不鏽鋼" + +msgid "Tungsten Carbide" msgstr "" -#, c-format, boost-format -msgid "%.1f" +msgid "High flow" +msgstr "" + +msgid "No wiki link available for this printer." msgstr "" msgid "Global" -msgstr "全局" +msgstr "全域" msgid "Objects" msgstr "物件" msgid "Advance" -msgstr "高級" +msgstr "進階" -#, fuzzy msgid "Compare presets" -msgstr "比較預設檔" +msgstr "比較設定" msgid "View all object's settings" msgstr "查看所有物件的設定" msgid "Material settings" -msgstr "" +msgstr "材料設定" -#, fuzzy msgid "Remove current plate (if not last one)" msgstr "刪除目前列印板（如果不是最後一個）" -#, fuzzy msgid "Auto orient objects on current plate" -msgstr "自動選轉列印板上物件方向" +msgstr "自動轉向列印板上物件" -#, fuzzy msgid "Arrange objects on current plate" msgstr "自動擺放列印板上物件" -#, fuzzy msgid "Unlock current plate" msgstr "解鎖列印板" -#, fuzzy msgid "Lock current plate" msgstr "鎖定列印板" -msgid "Edit current plate name" +msgid "Filament grouping" msgstr "" +msgid "Edit current plate name" +msgstr "編輯列印板名稱" + msgid "Move plate to the front" -msgstr "" +msgstr "更改列印板順序至前" -#, fuzzy msgid "Customize current plate" msgstr "自訂列印板參數" -#, fuzzy, boost-format +#, c-format, boost-format +msgid "The %s nozzle can not print %s." +msgstr "" + +#, boost-format +msgid "Mixing %1% with %2% in printing is not recommended.\n" +msgstr "" + +msgid " nozzle" +msgstr "" + +#, boost-format +msgid "" +"It is not recommended to print the following filament(s) with %1%: %2%\n" +msgstr "" + +msgid "" +"It is not recommended to use the following nozzle and filament " +"combinations:\n" +msgstr "" + +#, boost-format +msgid "%1% with %2%\n" +msgstr "" + +#, boost-format msgid " plate %1%:" msgstr "列印板 %1%：" @@ -5831,17 +6557,14 @@ msgstr "無效名稱，不允許使用以下字元：" msgid "Sliced Info" msgstr "切片資訊" -#, fuzzy msgid "Used Filament (m)" msgstr "線材消耗長度（m）" -#, fuzzy msgid "Used Filament (mm³)" msgstr "線材消耗體積（mm³）" -#, fuzzy msgid "Used Filament (g)" -msgstr "線材消耗重量（克）" +msgstr "線材消耗重量（g）" msgid "Used Materials" msgstr "線材消耗" @@ -5852,16 +6575,67 @@ msgstr "預估列印時間" msgid "Filament changes" msgstr "線材切換" -#, fuzzy +msgid "Set the number of AMS installed on the nozzle." +msgstr "" + +msgid "AMS(4 slots)" +msgstr "" + +msgid "AMS(1 slot)" +msgstr "" + +msgid "Not installed" +msgstr "" + +msgid "" +"The software does not support using different diameter of nozzles for one " +"print. If the left and right nozzles are inconsistent, we can only proceed " +"with single-head printing. Please confirm which nozzle you would like to use " +"for this project." +msgstr "" + +msgid "Switch diameter" +msgstr "" + +#, c-format, boost-format +msgid "Left nozzle: %smm" +msgstr "" + +#, c-format, boost-format +msgid "Right nozzle: %smm" +msgstr "" + +msgid "Sync printer information" +msgstr "" + +msgid "" +"The currently selected machine preset is inconsistent with the connected " +"printer type.\n" +"Are you sure to continue syncing?" +msgstr "" + +msgid "" +"There are unset nozzle types. Please set the nozzle types of all extruders " +"before synchronizing." +msgstr "" + +msgid "Sync extruder infomation" +msgstr "" + msgid "Click to edit preset" msgstr "點擊編輯預設檔設定" msgid "Connection" msgstr "連接" -#, fuzzy -msgid "Bed type" -msgstr "列印板類型" +msgid "Sync info" +msgstr "" + +msgid "Synchronize nozzle information and the number of AMS" +msgstr "" + +msgid "Project Filaments" +msgstr "" msgid "Flushing volumes" msgstr "廢料體積" @@ -5875,71 +6649,54 @@ msgstr "刪除最後一個線材" msgid "Synchronize filament list from AMS" msgstr "從 AMS 同步線材清單" -#, fuzzy msgid "Set filaments to use" msgstr "設定可選擇的線材" msgid "Search plate, object and part." -msgstr "" +msgstr "搜尋列印板、物件和零件。" msgid "Pellets" +msgstr "顆粒" + +#, c-format, boost-format +msgid "" +"After completing your operation, %s project will be closed and create a new " +"project." msgstr "" -#, fuzzy -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "沒有發現 AMS 線材。請在“設備”頁面選擇列印設備，將載入 AMS 資訊" - -msgid "Sync filaments with AMS" -msgstr "同步到 AMS 的線材清單" - -#, fuzzy -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "" -"同步到 AMS 的線材清單將刪除所有目前設定的線材預設檔、顏色。確定要繼續嗎？" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "已經同步過，你希望僅同步改變的線材還是重新同步所有線材？" - -msgid "Sync" -msgstr "僅同步改變的" - -msgid "Resync" -msgstr "重新同步所有" - msgid "There are no compatible filaments, and sync is not performed." msgstr "沒有任何相容的線材，同步操作未執行。" -#, fuzzy +msgid "Sync filaments with AMS" +msgstr "同步到 AMS 的線材清單" + msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Snapmaker Orca or restart Snapmaker Orca to check if there is an update to system " -"presets." +"There are some unknown or incompatible filaments mapped to generic preset.\n" +"Please update Snapmaker Orca or restart Snapmaker Orca to check if there is an " +"update to system presets." msgstr "" -"有一些未知型號的線材，映射到通用預設檔。請更新或者重啟 Snapmaker Orca，以檢查系" -"統預設檔有沒有更新。" -#, fuzzy, boost-format -msgid "Do you want to save changes to \"%1%\"?" -msgstr "是否儲存修改到 \"%1%\"？" - -#, fuzzy, c-format, boost-format msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." -msgstr "卸載成功。設備 %s（%s） 現在可能安全地從電腦移除。" +"Filament type and color information have been synchronized, but slot " +"information is not included." +msgstr "" -#, fuzzy, c-format, boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "退出設備 %s（%s） 失敗。" +#, boost-format +msgid "Do you want to save changes to \"%1%\"?" +msgstr "是否儲存變更到「%1%」？" + +#, c-format, boost-format +msgid "" +"Successfully unmounted. The device %s (%s) can now be safely removed from " +"the computer." +msgstr "卸載成功。設備 %s(%s) 現在可以安全移除。" + +#, c-format, boost-format +msgid "Ejecting of device %s (%s) has failed." +msgstr "" -#, fuzzy msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "偵測到有未儲存的專案項目，是否恢復此專案項目？" +msgstr "偵測到有未儲存的專案，是否恢復此專案？" msgid "Restore" msgstr "恢復" @@ -5952,83 +6709,108 @@ msgstr "" "目前熱床溫度比較高。在封閉的列印設備中列印該線材時，噴嘴可能會堵塞。請打開前" "門和/或拆下上部玻璃。" -#, fuzzy msgid "" "The nozzle hardness required by the filament is higher than the default " "nozzle hardness of the printer. Please replace the hardened nozzle or " "filament, otherwise, the nozzle will be attrited or damaged." msgstr "" -"線材所要求的噴嘴硬度高於列印設備預設的噴嘴硬度。請更換硬化的噴嘴或線材，否則" -"噴嘴可能被磨損或損壞。" +"線材所要求的噴嘴硬度高於列印設備預設的噴嘴硬度。請更換硬化噴嘴或線材，否則噴" +"嘴可能被磨損或損壞。" msgid "" "Enabling traditional timelapse photography may cause surface imperfections. " "It is recommended to change to smooth mode." msgstr "使用傳統模式的縮時攝影可能會導致表面缺陷。建議改為平滑模式。" +msgid "" +"Smooth mode for timelapse is enabled, but the prime tower is off, which may " +"cause print defects. Please enable the prime tower, re-slice and print again." +msgstr "" + msgid "Expand sidebar" msgstr "展開側邊欄" msgid "Collapse sidebar" msgstr "折疊側邊欄" +msgid "Tab" +msgstr "" + #, c-format, boost-format msgid "Loading file: %s" msgstr "載入檔案：%s" -msgid "The 3mf is not supported by Snapmaker Orca, load geometry data only." -msgstr "該 3mf 檔案不是來自 Snapmaker Orca，將只載入幾何數據。" +#, fuzzy +msgid "The 3MF is not supported by Snapmaker Orca, loading geometry data only." +msgstr "該 3MF 檔案不是來自 Snapmaker Orca，將只載入幾何資料。" -msgid "Load 3mf" +#, fuzzy +msgid "Load 3MF" msgstr "載入 3mf" +msgid "" +"This project was created with an Snapmaker Orca 2.3.1-alpha and uses infill " +"rotation template settings that may not work properly with your current " +"infill pattern. This could result in weak support or print quality issues." +msgstr "" + +msgid "" +"Would you like Snapmaker Orca to automatically fix this by clearing the rotation " +"template settings?" +msgstr "" + #, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" -msgstr "該 3mf 的版本 %s 比 %s 的版本 %s 新，發現以下參數值無法識別：" +"The 3MF file version %s is newer than %s's version %s, found the following " +"unrecognized keys:" +msgstr "該 3MF 的版本 %s 比 %s 的版本 %s 新，以下參數值無法識別：" msgid "You'd better upgrade your software.\n" msgstr "建議升級您的軟體版本。\n" #, fuzzy, c-format, boost-format msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." -msgstr "該 3mf 的版本 %s 比 %s 的版本 %s 要新，建議升級你的軟體。" +"The 3MF file version %s is newer than %s's version %s, we suggest to " +"upgrade your software." +msgstr "該 3MF 的版本 %s 比 %s 的版本 %s 要新，建議升級您的軟體。" -msgid "Invalid values found in the 3mf:" -msgstr "在 3mf 檔案中發現無效值：" +msgid "" +"The 3MF file was generated by an old Snapmaker Orca version, loading geometry " +"data only." +msgstr "" + +msgid "Invalid values found in the 3MF:" +msgstr "在 3MF 檔案中發現無效值：" -#, fuzzy msgid "Please correct them in the param tabs" msgstr "請在參數設定頁更正它們" -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "" +msgid "" +"The 3MF has the following modified G-code in filament or printer presets:" +msgstr "該 3MF 檔案在耗材或列印機預設中具有以下修改過的 GCODE：" msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" -msgstr "" +"Please confirm that all modified G-code is safe to prevent any damage to the " +"machine!" +msgstr "請確認這些修改過的 GCODE 是安全的，以防止對機器造成任何損壞！" -msgid "Modified G-codes" -msgstr "" +msgid "Modified G-code" +msgstr "已修改的 GCODE" -msgid "The 3mf has following customized filament or printer presets:" -msgstr "" +msgid "The 3MF has the following customized filament or printer presets:" +msgstr "該 3MF 檔案具有以下自訂的耗材或列印機預設：" msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " +"Please confirm that the G-code within these presets is safe to prevent any " "damage to the machine!" -msgstr "" +msgstr "請確認這些預設中的 G-code 是安全的，以防止對機器造成損壞！" msgid "Customized Preset" -msgstr "" +msgstr "自訂預設" #, fuzzy -msgid "Name of components inside step file is not UTF8 format!" -msgstr "step 檔案中的零件名稱包含非 UTF8 格式的字元！" +msgid "Name of components inside STEP file is not UTF8 format!" +msgstr "step 檔案內部元件的名稱不是 UTF8 格式！" msgid "The name may show garbage characters!" msgstr "此名稱可能顯示亂碼字元！" @@ -6036,24 +6818,23 @@ msgstr "此名稱可能顯示亂碼字元！" msgid "Remember my choice." msgstr "記住我的選擇。" -#, fuzzy, boost-format +#, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "載入檔案 \"%1%\" 失敗。發現無效設定值。" +msgstr "載入檔案「%1%」失敗。發現無效設定值。" -#, fuzzy msgid "Objects with zero volume removed" msgstr "體積為零的物件已被移除" msgid "The volume of the object is zero" msgstr "物件的體積為零" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" -"文件 %s 中的物件太小，可能以公尺（M）或英吋（Inches）為單位。\n" -"是否要轉換成公厘（mm）？" +"檔案 %s 中的物件太小，可能以公尺（M）或英吋（Inches）為單位。\n" +"是否要轉換成毫米（mm）？" msgid "Object too small" msgstr "物件尺寸過小" @@ -6075,12 +6856,22 @@ msgstr "將這些檔案載入為一個多零件物件？\n" msgid "Object with multiple parts was detected" msgstr "偵測到多零件物件" -msgid "The file does not contain any geometry data." -msgstr "此檔案不包含任何幾何數據。" +#, c-format, boost-format +msgid "" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "" msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "" + +msgid "The file does not contain any geometry data." +msgstr "此檔案不包含任何幾何資料。" + +msgid "" +"Your object appears to be too large, do you want to scale it down to fit the " +"print bed automatically?" msgstr "物件看起來太大，希望將物件自動縮小以適應列印板嗎？" msgid "Object too large" @@ -6103,9 +6894,11 @@ msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" +"檔案 %s 已存在\n" +"是否要覆蓋它？" msgid "Confirm Save As" -msgstr "" +msgstr "確認另存為" msgid "Delete object which is a part of cut object" msgstr "刪除切割物件的一部分" @@ -6115,8 +6908,9 @@ msgid "" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" -"您正嘗試刪除切割物件的一部分，這將破壞切割對應關係，刪除之後，將無法再保證模" -"型的一致性。" +"您正在嘗試刪除一個屬於切割物件的部分。\n" +"此操作將破壞切割對應關係。\n" +"模型的一致性可能無法保證。" msgid "The selected object couldn't be split." msgstr "選中的模型不可分割。" @@ -6139,6 +6933,34 @@ msgstr "選擇新檔案" msgid "File for the replace wasn't selected" msgstr "未選擇替換檔案" +msgid "Select folder to replace from" +msgstr "" + +msgid "Directory for the replace wasn't selected" +msgstr "" + +msgid "Replaced with STLs from directory:\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: same file.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: file does not exist.\n" +msgstr "" + +#, boost-format +msgid "✖ Skipped %1%: failed to replace.\n" +msgstr "" + +#, boost-format +msgid "✔ Replaced %1%.\n" +msgstr "" + +msgid "Replaced volumes" +msgstr "" + msgid "Please select a file" msgstr "請選擇一個檔案" @@ -6164,37 +6986,45 @@ msgid "warnings" msgstr "警告" msgid "Invalid data" -msgstr "無效數據" +msgstr "無效資料" msgid "Slicing Canceled" msgstr "切片已取消" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Slicing Plate %d" msgstr "正在切片列印板 %d" msgid "Please resolve the slicing errors and publish again." msgstr "請解決切片錯誤後再重新發布。" -#, fuzzy msgid "" "Network Plug-in is not detected. Network related features are unavailable." -msgstr "未偵測到網路套件。網路相關功能不可用。" +msgstr "未偵測到網路外掛程式。網路相關功能不可用。" msgid "" "Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" +"The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "僅預覽模式：\n" "被載入的檔案僅包含 G-Code，不支援進入準備頁面" -#, fuzzy +msgid "" +"The nozzle type and AMS quantity information has not been synced from the " +"connected printer.\n" +"After syncing, software can optimize printing time and filament usage when " +"slicing.\n" +"Would you like to sync now ?" +msgstr "" + +msgid "Sync now" +msgstr "" + msgid "You can keep the modified presets to the new project or discard them" msgstr "您可以將修改後的預設檔保留到新專案項目中或者忽略這些修改" -#, fuzzy msgid "Creating a new project" -msgstr "建立新專案項目" +msgstr "建立新專案" msgid "Load project" msgstr "載入專案項目" @@ -6212,34 +7042,44 @@ msgstr "儲存專案項目" msgid "Importing Model" msgstr "正在匯入模型" -msgid "prepare 3mf file..." -msgstr "正在準備 3mf 檔案..." +msgid "prepare 3MF file..." +msgstr "正在準備 3MF 檔案..." msgid "Download failed, unknown file format." -msgstr "" +msgstr "下載失敗，未知的檔案格式。" -msgid "downloading project ..." +msgid "downloading project..." msgstr "專案項目下載中..." msgid "Download failed, File size exception." -msgstr "" +msgstr "下載失敗，檔案大小異常。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Project downloaded %d%%" -msgstr "專案項目已下載　%d%%" +msgstr "專案已下載 %d%%" msgid "" "Importing to Snapmaker Orca failed. Please download the file and manually " "import it." msgstr "匯入 Snapmaker Orca 失敗。 請下載該檔案並手動匯入。" +msgid "INFO:" +msgstr "資訊：" + +msgid "" +"No accelerations provided for calibration. Use default acceleration value " +msgstr "未提供校正所需的加速度，將使用預設加速度值 " + +msgid "No speeds provided for calibration. Use default optimal speed " +msgstr "未提供校正所需的速度，將使用預設最佳速度 " + msgid "Import SLA archive" msgstr "匯入 SLA 存檔" msgid "The selected file" msgstr "已選擇的檔案" -msgid "does not contain valid gcode." +msgid "does not contain valid G-code." msgstr "不包含有效的 G-code 檔案。" msgid "Error occurs while loading G-code file" @@ -6248,18 +7088,17 @@ msgstr "載入 G-code 檔案時遇到錯誤" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "" +msgstr "載入路徑 %1% 的 ZIP 檔案失敗。" #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" -msgstr "" +msgstr "無法將檔案解壓縮到 %1%：%2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." -msgstr "" +msgstr "無法找到解壓縮的檔案 %1%。解壓縮檔案失敗。" -#, fuzzy msgid "Drop project file" msgstr "刪除專案項目" @@ -6270,7 +7109,7 @@ msgid "Open as project" msgstr "作為專案項目打開" msgid "Import geometry only" -msgstr "僅匯入模型數據" +msgstr "僅匯入模型資料" msgid "Only one G-code file can be opened at the same time." msgstr "只能同時打開一個 G-code 檔案。" @@ -6278,23 +7117,21 @@ msgstr "只能同時打開一個 G-code 檔案。" msgid "G-code loading" msgstr "正在載入 G-code 檔案" -msgid "G-code files can not be loaded with models together!" -msgstr "G-code 檔案不能和模型一起載入" +msgid "G-code files cannot be loaded with models together!" +msgstr "G-code 檔案不能和模型一起載入！" -msgid "Can not add models when in preview mode!" -msgstr "在預覽模式不允許增加模型" +msgid "Cannot add models when in preview mode!" +msgstr "在預覽模式不允許增加模型！" msgid "All objects will be removed, continue?" msgstr "即將刪除所有物件，是否繼續？" -#, fuzzy msgid "The current project has unsaved changes, save it before continue?" -msgstr "目前專案項目包含未儲存的修改，是否先儲存？" +msgstr "目前專案包含未儲存的修改，是否先儲存？" msgid "Number of copies:" msgstr "複製數量：" -#, fuzzy msgid "Copies of the selected object" msgstr "所選物件的複製數量" @@ -6313,56 +7150,54 @@ msgstr "FAT 檔案系統不允許使用以下字元：" msgid "Save Sliced file as:" msgstr "切片檔案另存為：" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "The file %s has been sent to the printer's storage space and can be viewed " "on the printer." msgstr "檔案 %s 已經傳送到列印設備的儲存空間，可以在列印設備上瀏覽。" +msgid "The nozzle type is not set. Please set the nozzle and try again." +msgstr "" + +msgid "The nozzle type is not set. Please check." +msgstr "" + msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try again." msgstr "" +"無法對模型網格執行布林運算。只有正向部分會被保留。您可以修正網格後再試一次。" #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "" +msgstr "原因：零件「%1%”」無物件。" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "" +msgstr "原因：零件「%1%」無體積。" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "" +msgstr "原因：零件「%1%」" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "" +msgstr "原因：「%1%」與另一個零件沒有交集。" -#, fuzzy msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be exported." msgstr "無法對模型網格執行布林運算。只有正面部分將被導出。" -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" - -msgid "Private protection" -msgstr "" - -#, fuzzy msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "列印設備是否準備完成？列印平台是否在正確的位置、有沒有異物、是否乾淨？" msgid "Upload and Print" msgstr "上傳並列印" -#, fuzzy +msgid "Abnormal print file data. Please slice again" +msgstr "列印檔案資料異常，請重新切片" + msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." @@ -6373,29 +7208,51 @@ msgstr "" msgid "Send G-code" msgstr "傳送 G-code" -#, fuzzy msgid "Send to printer" msgstr "傳送到列印設備" -#, fuzzy msgid "Custom supports and color painting were removed before repairing." -msgstr "自訂的支撐和上色在模型修復之前將被清除。" +msgstr "自訂的支撐和上色在模型修復之前被清除了。" msgid "Optimize Rotation" +msgstr "最佳化旋轉" + +#, c-format, boost-format +msgid "" +"Printer not connected. Please go to the device page to connect %s before " +"syncing." msgstr "" -msgid "Invalid number" -msgstr "無效數字" +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not %s. Please switch " +"to %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" +msgstr "" + +msgid "Synchronize AMS Filament Information" +msgstr "" -#, fuzzy msgid "Plate Settings" msgstr "列印板參數設定" -#, fuzzy, boost-format +#, boost-format msgid "Number of currently selected parts: %1%\n" msgstr "目前選擇的零件數量：%1%\n" -#, fuzzy, boost-format +#, boost-format msgid "Number of currently selected objects: %1%\n" msgstr "目前選擇的物件數量：%1%\n" @@ -6411,15 +7268,15 @@ msgstr "物件名字：%1%\n" msgid "Size: %1% x %2% x %3% in\n" msgstr "大小：%1% x %2% x %3% 英寸\n" -#, fuzzy, boost-format +#, boost-format msgid "Size: %1% x %2% x %3% mm\n" -msgstr "大小： %1% x %2% x %3% m\n" +msgstr "大小： %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" msgstr "體積： %1% 英寸³\n" -#, fuzzy, boost-format +#, boost-format msgid "Volume: %1% mm³\n" msgstr "體積： %1% mm³\n" @@ -6427,25 +7284,47 @@ msgstr "體積： %1% mm³\n" msgid "Triangles: %1%\n" msgstr "三角形：%1%\n" -msgid "Tips:" -msgstr "提示：" - -#, fuzzy msgid "" "\"Fix Model\" feature is currently only on Windows. Please repair the model " "on Snapmaker Orca(windows) or CAD softwares." msgstr "" -"\"修復模型\"功能目前僅適用於 Windows 系統。請在 Windows 版本的 Snapmaker Orca " -"或 CAD 軟體上修復模型。" +"「模型修復」功能目前僅適用於 Windows。請在 Snapmaker Orca（Windows）或 CAD 軟體" +"中修復模型。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." +"Plate %d: %s is not suggested to be used to print filament %s (%s). If you " +"still want to do this print job, please set this filament's bed temperature " +"to non-zero." +msgstr "" +"列印板 %d：%s 不建議用於列印 %s（%s）線材。如果您仍想執行此列印，請將該線材的" +"熱床溫度設為非零值。" + +msgid "" +"Currently, the object configuration form cannot be used with a multiple-" +"extruder printer." +msgstr "" + +msgid "Not available" +msgstr "" + +msgid "isometric" +msgstr "" + +msgid "top_front" +msgstr "" + +msgid "top" +msgstr "" + +msgid "bottom" +msgstr "" + +msgid "front" +msgstr "" + +msgid "rear" msgstr "" -"列印板 %d：%s 不建議被用於列印 %s（%s）線材。如果你依然想列印，請設定線材對應" -"的熱床溫度為非零值。" msgid "Switching the language requires application restart.\n" msgstr "切換語言要求重啟應用程式。\n" @@ -6457,45 +7336,11 @@ msgid "Language selection" msgstr "語言選擇" msgid "Switching application language while some presets are modified." -msgstr "在切換應用語言之前發現某些參數預設有更改。" +msgstr "在切換應用程式語言之前發現某些參數預設有更改。" msgid "Changing application language" msgstr "正在為應用程式切換語言" -msgid "Changing the region will log out your account.\n" -msgstr "修改區域會自動登出您的帳號。\n" - -msgid "Region selection" -msgstr "區域選擇" - -msgid "Second" -msgstr "秒" - -msgid "Browse" -msgstr "瀏覽" - -msgid "Choose Download Directory" -msgstr "選擇下載資料夾" - -msgid "Associate" -msgstr "" - -msgid "with Snapmaker Orca so that Orca can open models from" -msgstr "" - -msgid "Current Association: " -msgstr "" - -msgid "Current Instance" -msgstr "" - -msgid "Current Instance Path: " -msgstr "" - -#, fuzzy -msgid "General Settings" -msgstr "一般設定" - msgid "Asia-Pacific" msgstr "亞太" @@ -6511,22 +7356,56 @@ msgstr "北美" msgid "Others" msgstr "其他" -msgid "Login Region" -msgstr "登入區域" +msgid "Changing the region will log out your account.\n" +msgstr "修改區域會自動登出您的帳號。\n" -msgid "Stealth Mode" -msgstr "區域網路模式" +msgid "Region selection" +msgstr "區域選擇" + +msgid "sec" +msgstr "" + +msgid "The period of backup in seconds." +msgstr "備份的週期。" + +msgid "Bed Temperature Difference Warning" +msgstr "" msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." +"Using filaments with significantly different temperatures may cause:\n" +"• Extruder clogging\n" +"• Nozzle damage\n" +"• Layer adhesion issues\n" +"\n" +"Continue with enabling this feature?" msgstr "" -msgid "Enable network plugin" +msgid "Browse" +msgstr "瀏覽" + +msgid "Choose folder for downloaded items" msgstr "" -msgid "Check for stable updates only" -msgstr "" +msgid "Choose Download Directory" +msgstr "選擇下載資料夾" + +msgid "Associate" +msgstr "關聯" + +msgid "with Snapmaker Orca so that Orca can open models from" +msgstr "與 Snapmaker Orca 關聯，以便 Orca 可以從中打開模型" + +msgid "Current Association: " +msgstr "目前關聯：" + +msgid "Current Instance" +msgstr "目前實例" + +msgid "Current Instance Path: " +msgstr "目前實例路徑：" + +msgid "General" +msgstr "一般" msgid "Metric" msgstr "公制" @@ -6537,15 +7416,27 @@ msgstr "英製" msgid "Units" msgstr "單位" +msgid "Home" +msgstr "首頁" + +msgid "Default page" +msgstr "預設頁面" + +msgid "Set the page opened on startup." +msgstr "設定為啟動頁面。" + +msgid "Enable dark mode" +msgstr "啟用深色模式" + msgid "Allow only one Snapmaker Orca instance" -msgstr "" +msgstr "僅允許一個 Snapmaker Orca 程序" msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"在 OSX 上，預設情況下總是只有一個應用程式實例在運行。但是卻允許從命令視窗執行" +"在 OSX 上，預設情況下總是只有一個應用程式實例在執行。但是卻允許從命令視窗執行" "同一應用程式的多個實例。當您設定了這個設定後將只允許一個實例執行。" msgid "" @@ -6553,47 +7444,8 @@ msgid "" "same Snapmaker Orca is already running, that instance will be reactivated " "instead." msgstr "" - -msgid "Home" -msgstr "首頁" - -msgid "Default Page" -msgstr "預設頁面" - -msgid "Set the page opened on startup." -msgstr "設定為啟動頁面。" - -msgid "Touchpad" -msgstr "" - -msgid "Camera style" -msgstr "" - -msgid "" -"Select camera navigation style.\n" -"Default: LMB+move for rotation, RMB/MMB+move for panning.\n" -"Touchpad: Alt+move for rotation, Shift+move for panning." -msgstr "" - -msgid "Zoom to mouse position" -msgstr "放大到滑鼠位置" - -msgid "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." -msgstr "在 3D 視角放大到滑鼠位置，而不是 2D 窗口的中心。" - -msgid "Use free camera" -msgstr "使用自由鏡頭" - -msgid "If enabled, use free camera. If not enabled, use constrained camera." -msgstr "如果啟用，則使用自由鏡頭。若未啟用，則使用受限鏡頭。" - -msgid "Reverse mouse zoom" -msgstr "" - -msgid "If enabled, reverses the direction of zoom with mouse wheel." -msgstr "" +"啟用後，嘗試開起 Snapmaker Orca 時若有另一個 Snapmaker Orca 程序已在執行時，已在執行" +"的程序會被重新啟動。" msgid "Show splash screen" msgstr "顯示啟動動畫" @@ -6601,185 +7453,267 @@ msgstr "顯示啟動動畫" msgid "Show the splash screen during startup." msgstr "啟動時顯示啟動動畫。" -#, fuzzy -msgid "Show \"Tip of the day\" notification after start" -msgstr "啟動後顯示\"每日小提示\"通知" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "如果啟用，將在啟動時顯示有用的提示。" - -msgid "Flushing volumes: Auto-calculate everytime the color changed." +msgid "Downloads folder" msgstr "" -msgid "If enabled, auto-calculate everytime the color changed." +msgid "Target folder for downloaded items" msgstr "" +msgid "Load All" +msgstr "載入全部" + +msgid "Ask When Relevant" +msgstr "必要時詢問" + +msgid "Always Ask" +msgstr "總是詢問" + +msgid "Load Geometry Only" +msgstr "僅載入幾何資料" + +msgid "Load behaviour" +msgstr "載入方式" + +msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" +msgstr "開啟 .3mf 檔案時，是否需要載入印表機、線材和參數設定？" + +msgid "Maximum recent files" +msgstr "" + +msgid "Maximum count of recent files" +msgstr "" + +msgid "Add STL/STEP files to recent files list" +msgstr "" + +msgid "Don't warn when loading 3MF with modified G-code" +msgstr "載入包含修改過 G-code 的 3MF 時不顯示警告" + +msgid "Show options when importing STEP file" +msgstr "顯示 STEP 網格參數設定視窗。" + msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "" +"If enabled, a parameter settings dialog will appear during STEP file import." +msgstr "啟用後，匯入 STEP 檔案時會顯示參數設定視窗。" -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "" +msgid "Auto backup" +msgstr "自動備份" + +msgid "" +"Backup your project periodically for restoring from the occasional crash." +msgstr "定期備份專案，以便從未預期的錯誤中恢復。" + +msgid "Preset" +msgstr "預設" msgid "Remember printer configuration" -msgstr "" +msgstr "記住機臺設定" msgid "" "If enabled, Orca will remember and switch filament/process configuration for " "each printer automatically." +msgstr "啟用後，Orca 會記住且自動切換各機臺線材與列印設定。" + +msgid "Features" msgstr "" -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "" +msgid "Multi device management" +msgstr "多臺設備管理" msgid "" "With this option enabled, you can send a task to multiple devices at the " "same time and manage multiple devices." +msgstr "啟用時可以同時傳送到並管理多個機臺。" + +msgid "(Requires restart)" msgstr "" -msgid "Network" -msgstr "網路" +msgid "Pop up to select filament grouping mode" +msgstr "" -#, fuzzy -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "同步使用者預設（列印設備/線材/列印品質參數）" +msgid "Behaviour" +msgstr "" -msgid "User Sync" -msgstr "使用者同步" +msgid "All" +msgstr "所有" -msgid "Update built-in Presets automatically." -msgstr "自動更新系統預設" +msgid "Auto flush after changing..." +msgstr "" -msgid "System Sync" -msgstr "系統同步" +msgid "Auto calculate flushing volumes when selected values changed" +msgstr "" + +msgid "Auto arrange plate after cloning" +msgstr "複製後自動排列列印板" + +msgid "Touchpad" +msgstr "觸控板" + +msgid "Camera style" +msgstr "相機模式" + +msgid "" +"Select camera navigation style.\n" +"Default: LMB+move for rotation, RMB/MMB+move for panning.\n" +"Touchpad: Alt+move for rotation, Shift+move for panning." +msgstr "" +"選擇相機導航樣式。\n" +"預設：左鍵+移動旋轉，右鍵/中鍵+移動平移。\n" +"觸控板：Alt+移動旋轉，Shift+移動平移。" + +msgid "Orbit speed multiplier" +msgstr "視角旋轉速度倍率" + +msgid "Multiplies the orbit speed for finer or coarser camera movement." +msgstr "調整視角速度，使鏡頭移動更細緻或更快速。" + +msgid "Zoom to mouse position" +msgstr "放大到滑鼠位置" + +msgid "" +"Zoom in towards the mouse pointer's position in the 3D view, rather than the " +"2D window center." +msgstr "在 3D 視圖中以滑鼠指標的位置為中心放大，而非以 2D 視窗中心放大。" + +msgid "Use free camera" +msgstr "使用自由鏡頭" + +msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "如果啟用，則使用自由鏡頭。若未啟用，則使用受限鏡頭。" + +msgid "Swap pan and rotate mouse buttons" +msgstr "交换鼠标按钮的平移与旋转功能" + +msgid "" +"If enabled, swaps the left and right mouse buttons pan and rotate functions." +msgstr "启用后，将左键和右键的平移与旋转功能对调" + +msgid "Reverse mouse zoom" +msgstr "反轉滑鼠滾輪縮放方向" + +msgid "If enabled, reverses the direction of zoom with mouse wheel." +msgstr "啟用後，改變滑鼠滾輪縮放方向。" + +msgid "Clear my choice on..." +msgstr "" + +msgid "Unsaved projects" +msgstr "" + +msgid "Clear my choice on the unsaved projects." +msgstr "清除我對未儲存專案項目的選擇。" + +msgid "Unsaved presets" +msgstr "" msgid "Clear my choice on the unsaved presets." msgstr "清除我對未儲存預設的選擇。" -#, fuzzy +msgid "Synchronizing printer preset" +msgstr "" + +msgid "" +"Clear my choice for synchronizing printer preset after loading the file." +msgstr "" + +msgid "Login region" +msgstr "登入區域" + +msgid "Stealth mode" +msgstr "區域網路模式" + +msgid "" +"This stops the transmission of data to Bambu's cloud services. Users who " +"don't use BBL machines or use LAN mode only can safely turn on this function." +msgstr "" +"這會停止資料傳輸到 Bambu 的雲端服務。使用者如果不使用 Bambu 機台或僅使用區域" +"網路模式，可以安全地啟用此功能。" + +msgid "Network test" +msgstr "網路測試" + +msgid "Test" +msgstr "測試" + +msgid "Update & sync" +msgstr "" + +msgid "Check for stable updates only" +msgstr "僅檢查穩定版更新" + +msgid "Auto sync user presets (Printer/Filament/Process)" +msgstr "自動同步使用者預設（列印設備/線材/列印品質參數）" + +msgid "Update built-in Presets automatically." +msgstr "自動更新系統預設。" + +msgid "Network plugin" +msgstr "" + +msgid "Enable network plugin" +msgstr "啟用網路外掛程式" + +msgid "Use legacy network plugin" +msgstr "使用舊版網路外掛" + +msgid "" +"Disable to use latest network plugin that supports new BambuLab firmwares." +msgstr "停用此選項將改用最新網路外掛，該外掛支援新版 BambuLab 韌體。" + msgid "Associate files to Snapmaker Orca" -msgstr " Snapmaker Orca 檔案關聯" +msgstr "Snapmaker Orca 檔案關聯" #, fuzzy -msgid "Associate .3mf files to Snapmaker Orca" +msgid "Associate 3MF files to Snapmaker Orca" msgstr "使用 Snapmaker Orca 打開 .3mf 檔案" #, fuzzy -msgid "If enabled, sets Snapmaker Orca as default application to open .3mf files" +msgid "If enabled, sets Snapmaker Orca as default application to open 3MF files." msgstr "開啟後，將預設使用 Snapmaker Orca 打開 .3mf 檔案" #, fuzzy -msgid "Associate .stl files to Snapmaker Orca" +msgid "Associate STL files to Snapmaker Orca" msgstr "使用 Snapmaker Orca 打開 .stl 檔案" #, fuzzy -msgid "If enabled, sets Snapmaker Orca as default application to open .stl files" +msgid "If enabled, sets Snapmaker Orca as default application to open STL files." msgstr "開啟後，將預設使用 Snapmaker Orca 打開 .stl 檔案" #, fuzzy -msgid "Associate .step/.stp files to Snapmaker Orca" +msgid "Associate STEP files to Snapmaker Orca" msgstr "使用 Snapmaker Orca 打開 .step/.stp 檔案" #, fuzzy -msgid "If enabled, sets Snapmaker Orca as default application to open .step files" +msgid "If enabled, sets Snapmaker Orca as default application to open STEP files." msgstr "開啟後，將預設使用 Snapmaker Orca 打開 .step 檔案" msgid "Associate web links to Snapmaker Orca" +msgstr "將網頁連結關聯到 Snapmaker Orca" + +msgid "Developer" msgstr "" -msgid "Associate URLs to Snapmaker Orca" -msgstr "" - -msgid "Maximum recent projects" -msgstr "最近專案項目的最大數量" - -msgid "Maximum count of recent projects" -msgstr "近期專案項目的最大統計" - -msgid "Clear my choice on the unsaved projects." -msgstr "清除我對未儲存的專案項目的選擇。" - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "" - -msgid "Auto-Backup" -msgstr "自動備份" - -#, fuzzy -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "定期備份專案項目，以便從未預期的錯誤中恢復。" - -msgid "every" -msgstr "所有" - -msgid "The peroid of backup in seconds." -msgstr "備份的週期" - -msgid "Downloads" -msgstr "下載" - -msgid "Dark Mode" -msgstr "深色模式" - -msgid "Enable Dark mode" -msgstr "啟用深色模式" - msgid "Develop mode" msgstr "開發者模式" msgid "Skip AMS blacklist check" msgstr "跳過 AMS 黑名單檢查" -#, fuzzy -msgid "Home page and daily tips" -msgstr "首頁和每日小提示" +msgid "Remove mixed temperature restriction" +msgstr "" -msgid "Show home page on startup" -msgstr "啟動時顯示首頁" +msgid "" +"With this option enabled, you can print materials with a large temperature " +"difference together." +msgstr "" -msgid "Sync settings" -msgstr "同步設定" +msgid "Allow Abnormal Storage" +msgstr "" -msgid "User sync" -msgstr "使用者同步" - -#, fuzzy -msgid "Preset sync" -msgstr "預設檔同步" - -msgid "Preferences sync" -msgstr "偏好設定同步" - -msgid "View control settings" -msgstr "視角控制設定" - -#, fuzzy -msgid "Rotate of view" -msgstr "旋轉視角" - -#, fuzzy -msgid "Move of view" -msgstr "移動視角" - -#, fuzzy -msgid "Zoom of view" -msgstr "縮放視角" - -msgid "Other" -msgstr "其他" - -msgid "Mouse wheel reverses when zooming" -msgstr "縮放時滑鼠滾輪反轉" - -msgid "Enable SSL(MQTT)" -msgstr "啟用SSL（MQTT）" - -msgid "Enable SSL(FTP)" -msgstr "啟用SSL（FTP）" - -msgid "Internal developer mode" -msgstr "內部開發者模式" +msgid "" +"This allows the use of Storage that is marked as abnormal by the Printer.\n" +"Use at your own risk, can cause issues!" +msgstr "" msgid "Log Level" msgstr "日誌級別" @@ -6799,18 +7733,59 @@ msgstr "除錯" msgid "trace" msgstr "跟蹤" -#, fuzzy +msgid "Debug" +msgstr "" + +msgid "Sync settings" +msgstr "同步設定" + +msgid "User sync" +msgstr "使用者同步" + +msgid "Preset sync" +msgstr "預設檔同步" + +msgid "Preferences sync" +msgstr "偏好設定同步" + +msgid "View control settings" +msgstr "視角控制設定" + +msgid "Rotate of view" +msgstr "旋轉視角" + +msgid "Move of view" +msgstr "移動視角" + +msgid "Zoom of view" +msgstr "縮放視角" + +msgid "Other" +msgstr "其他" + +msgid "Mouse wheel reverses when zooming" +msgstr "縮放時滑鼠滾輪反轉" + +msgid "Enable SSL(MQTT)" +msgstr "啟用SSL（MQTT）" + +msgid "Enable SSL(FTP)" +msgstr "啟用SSL（FTP）" + +msgid "Internal developer mode" +msgstr "內部開發者模式" + msgid "Host Setting" msgstr "伺服器設定" msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "" +msgstr "開發環境主機：api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "" +msgstr "測試環境主機：api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "" +msgstr "預發布環境主機：api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "正式環境" @@ -6821,35 +7796,38 @@ msgstr "儲存" msgid "save debug settings" msgstr "儲存除錯設定" -msgid "DEBUG settings have saved successfully!" +msgid "DEBUG settings have been saved successfully!" msgstr "除錯模式生效!" -msgid "Switch cloud environment, Please login again!" +msgid "Cloud environment switched, please login again!" msgstr "切換雲端環境，請重新登入!" -#, fuzzy msgid "System presets" -msgstr "系統預設檔" +msgstr "系統預設" -#, fuzzy msgid "User presets" -msgstr "使用者預設檔" +msgstr "使用者預設" msgid "Incompatible presets" msgstr "不相容的預設" +msgid "My Printer" +msgstr "" + +msgid "Left filaments" +msgstr "" + msgid "AMS filaments" msgstr "AMS 線材" -msgid "Click to pick filament color" +msgid "Right filaments" +msgstr "" + +msgid "Click to select filament color" msgstr "點擊設定線材顏色" -msgid "Please choose the filament colour" -msgstr "請選擇線材顏色" - -#, fuzzy msgid "Add/Remove presets" -msgstr "新增/刪除 預設檔" +msgstr "新增/刪除 預設" msgid "Edit preset" msgstr "編輯預設" @@ -6857,62 +7835,77 @@ msgstr "編輯預設" msgid "Project-inside presets" msgstr "項目預設" +msgid "System" +msgstr "" + +msgid "Unsupported presets" +msgstr "" + +msgid "Unsupported" +msgstr "" + msgid "Add/Remove filaments" msgstr "新增/刪除線材" msgid "Add/Remove materials" msgstr "新增/刪除材料" -msgid "Select/Remove printers(system presets)" -msgstr "" +msgid "Select/Remove printers (system presets)" +msgstr "選擇/移除機台(系統預設)" msgid "Create printer" -msgstr "" +msgstr "建立機臺" + +msgid "Empty" +msgstr "空" + +msgid "Incompatible" +msgstr "不相容的預設" msgid "The selected preset is null!" msgstr "選擇的預設為空！" msgid "End" -msgstr "End" +msgstr "" msgid "Customize" msgstr "自訂" msgid "Other layer filament sequence" -msgstr "" +msgstr "其他層的線材列印順序" msgid "Please input layer value (>= 2)." -msgstr "" +msgstr "請輸入層數值（>= 2）" -#, fuzzy msgid "Plate name" msgstr "列印板名稱" +msgid "Same as Global Plate Type" +msgstr "跟隨全域列印板設定" + +msgid "Bed type" +msgstr "列印板類型" + msgid "Same as Global Print Sequence" -msgstr "跟隨全局列印順序" +msgstr "跟隨全域列印順序" msgid "Print sequence" msgstr "列印順序" msgid "Same as Global" -msgstr "" +msgstr "跟隨全域設定" msgid "Disable" -msgstr "" +msgstr "停用" msgid "Spiral vase" -msgstr "花瓶模式" +msgstr "螺旋花瓶模式" msgid "First layer filament sequence" msgstr "首層線材列印順序" -#, fuzzy -msgid "Same as Global Plate Type" -msgstr "跟隨全局列印板設定" - -#, fuzzy msgid "Same as Global Bed Type" -msgstr "跟隨全局列印板設定" +msgstr "跟隨全域列印板設定" msgid "By Layer" msgstr "逐層" @@ -6927,40 +7920,36 @@ msgid "Log Out" msgstr "登出" msgid "Slice all plate to obtain time and filament estimation" -msgstr "正在切片以獲取切片資訊和預估列印時間" +msgstr "正在切片以取得切片資訊和預估列印時間" -#, fuzzy -msgid "Packing project data into 3mf file" -msgstr "正在將專案資料打包到 3mf 檔案中" +msgid "Packing project data into 3MF file" +msgstr "正在將專案資料打包到 3MF 檔案中" -#, fuzzy -msgid "Uploading 3mf" +msgid "Uploading 3MF" msgstr "正在上傳 3mf" msgid "Jump to model publish web page" msgstr "發布頁面" -msgid "Note: The preparation may takes several minutes. Please be patiant." +msgid "Note: The preparation may take several minutes. Please be patient." msgstr "提示：發布前需要一些準備時間，請耐心等待。" msgid "Publish" msgstr "發布" -msgid "Publish was cancelled" +msgid "Publish was canceled" msgstr "發布已取消" -#, fuzzy msgid "Slicing Plate 1" msgstr "正在切片列印板 1" -#, fuzzy -msgid "Packing data to 3mf" +msgid "Packing data to 3MF" msgstr "將資料打包至 3mf" msgid "Jump to webpage" -msgstr "轉換到網頁" +msgstr "跳至網頁" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Save %s as" msgstr "另存 %s 為" @@ -6973,18 +7962,20 @@ msgstr "項目預設" msgid "Name is unavailable." msgstr "名稱不可用。" -msgid "Overwrite a system profile is not allowed" +msgid "Overwriting a system profile is not allowed." msgstr "不允許覆蓋系統預設" -#, fuzzy, boost-format +#, boost-format msgid "Preset \"%1%\" already exists." -msgstr "預設 \"%1%\" 已存在。" +msgstr "預設「%1%」已存在。" -#, fuzzy, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "預設 \"%1%\" 已存在，並且和目前列印設備不相容。" +#, boost-format +msgid "" +"Preset \"%1%\" already exists and is incompatible with the current printer." +msgstr "預設「%1%」已存在，並且和目前列印設備不相容。" -msgid "Please note that saving action will replace this preset" +#, fuzzy +msgid "Please note that saving will overwrite this preset." msgstr "請注意這個預設會在儲存過程中被替換" msgid "The name cannot be the same as a preset alias name." @@ -6997,57 +7988,29 @@ msgctxt "PresetName" msgid "Copy" msgstr "複製" -#, fuzzy, boost-format +#, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "選中的列印設備 \"%1%\" 和預設 \"%2%\"" +msgstr "選中的列印設備「%1%」和預設「%2%」" -#, fuzzy, boost-format +#, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "請選擇儲存後對 \"%1%\" 預設的操作。" +msgstr "請選擇儲存後對「%1%」預設的操作。" -#, fuzzy, boost-format +#, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "為 \"%1%\"，把 \"%2%\" 更換為 \"%3%\" " +msgstr "為「%1%」，把「%2%」更換為「%3%」" -#, fuzzy, boost-format +#, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "為 \"%1%\"，增加 \"%2%\" 為一個新預設" +msgstr "為「%1%」，增加「%2%」為一個新預設" -#, fuzzy, boost-format +#, boost-format msgid "Simply switch to \"%1%\"" -msgstr "直接切換到 \"%1%\" " +msgstr "直接切換到「%1%」" msgid "Task canceled" msgstr "任務已取消" -msgid "(LAN)" -msgstr "（區域網路）" - -msgid "Search" -msgstr "搜尋" - -msgid "My Device" -msgstr "我的設備" - -msgid "Other Device" -msgstr "其他設備" - -msgid "Online" -msgstr "在線" - -msgid "Input access code" -msgstr "輸入訪問碼" - -msgid "Can't find my devices?" -msgstr "無法找到我的設備？" - -msgid "Log out successful." -msgstr "登出成功。" - -msgid "Busy" -msgstr "忙碌" - -#, fuzzy msgid "Bambu Cool Plate" msgstr "低溫列印版" @@ -7055,26 +8018,64 @@ msgid "PLA Plate" msgstr "PLA 列印板" msgid "Bambu Engineering Plate" -msgstr "工程列印熱床" +msgstr "Bambu 工程列印熱板" msgid "Bambu Smooth PEI Plate" -msgstr "" +msgstr "Bambu 平滑 PEI 列印板" -#, fuzzy msgid "High temperature Plate" msgstr "高溫列印板" msgid "Bambu Textured PEI Plate" +msgstr "Bambu 紋理 PEI 列印板" + +msgid "Bambu Cool Plate SuperTack" msgstr "" -msgid "Send print job to" -msgstr "傳送列印作業至" +msgid "Send print job" +msgstr "" + +msgid "On" +msgstr "" + +msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" +msgstr "" + +msgid "Manually change external spool during printing for multi-color printing" +msgstr "" + +msgid "Multi-color with external" +msgstr "" + +msgid "Your filament grouping method in the sliced file is not optimal." +msgstr "" + +msgid "Auto Bed Leveling" +msgstr "" + +msgid "" +"This checks the flatness of heatbed. Leveling makes extruded height " +"uniform.\n" +"*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is " +"fine." +msgstr "" msgid "Flow Dynamics Calibration" -msgstr "動態流量校準" +msgstr "動態流量校正" -msgid "Click here if you can't connect to the printer" -msgstr "如果無法連接到列印設備，請按一下此處" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality.\n" +"*Automatic mode: Skip if the filament was calibrated recently." +msgstr "" + +msgid "Nozzle Offset Calibration" +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing. Skip if unnecessary." +msgstr "" msgid "send completed" msgstr "傳送完成" @@ -7082,218 +8083,306 @@ msgstr "傳送完成" msgid "Error code" msgstr "錯誤代碼" -#, fuzzy -msgid "No login account, only printers in LAN mode are displayed" -msgstr "未登入帳號，僅顯示區域網路模式的列印設備" - -msgid "Connecting to server" -msgstr "正在連接伺服器..." - -msgid "Synchronizing device information" -msgstr "正在同步設備資訊" - -msgid "Synchronizing device information time out" -msgstr "同步設備資訊逾時" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "設備升級中，無法傳送列印作業" - -#, fuzzy -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "列印設備正在執行指令，請在指令結束後重新開始列印" - -#, fuzzy -msgid "The printer is busy on other print job" -msgstr "列印設備正在執行其他列印作業" - -#, fuzzy, c-format, boost-format -msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." +msgid "High Flow" msgstr "" -"線材編號 %s 超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" -#, fuzzy +#, c-format, boost-format msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "線材編號超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" - -#, fuzzy -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" +"The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). " +"Please make sure the nozzle installed matches with settings in printer, then " +"set the corresponding printer preset while slicing." msgstr "" -"已自動建立 \"線材清單=>AMS 槽位\" 的映射關係。 可點擊上方的線材來手動設定其所" -"對應的 AMS 槽位" -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "請在傳送列印前點擊上方各個線材，指定其所對應的 AMS 槽位" - -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "Filament %s does not match the filament in AMS slot %s. Please update the " "printer firmware to support AMS slot assignment." msgstr "" "線材編號 %s 和 AMS 槽位 %s 中的線材材質不相符，請更新列印設備韌體以支援 AMS " -"槽位映射功能" +"槽位映射功能。" -#, fuzzy msgid "" "Filament does not match the filament in AMS slot. Please update the printer " "firmware to support AMS slot assignment." msgstr "" "材料編號和 AMS 槽位中的線材材質不相符，請更新列印設備韌體以支援 AMS 槽位映射" -"功能" - -#, fuzzy -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "" -"已自動建立 \"線材清單=>AMS 槽位\" 的映射關係。 可點擊上方的線材來手動設定其所" -"對應的 AMS 槽位" - -#, fuzzy -msgid "An SD card needs to be inserted before printing." -msgstr "請在進行列印前插入 SD記憶卡" +"功能。" #, c-format, boost-format msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." +"The selected printer (%s) is incompatible with the print file configuration " +"(%s). Please adjust the printer preset in the prepare page or choose a " +"compatible printer on this page." msgstr "" -#, fuzzy -msgid "An SD card needs to be inserted to record timelapse." -msgstr "使用縮時攝影功能需要插入 SD 記憶卡" - -#, fuzzy -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "需要更新列印設備韌體後，才能將列印作業傳送到列印設備" - -#, fuzzy -msgid "Cannot send the print job for empty plate" -msgstr "無法為空列印板傳送列印作業" - -#, fuzzy -msgid "This printer does not support printing all plates" -msgstr "此列印設備類型不支援列印所有列印板" - -#, fuzzy msgid "" "When enable spiral vase mode, machines with I3 structure will not generate " "timelapse videos." -msgstr "當啟用花瓶模式時，龍門結構的設備不會產生縮時攝影影片" +msgstr "當啟用螺旋花瓶模式時，龍門結構的設備不會產生縮時攝影影片。" msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." +"The current printer does not support timelapse in Traditional Mode when " +"printing By-Object." msgstr "" msgid "Errors" msgstr "錯誤" -msgid "Please check the following:" -msgstr "請檢查以下內容：" - -#, fuzzy msgid "" -"The printer type selected when generating G-Code is not consistent with the " +"More than one filament types have been mapped to the same external spool, " +"which may cause printing issues. The printer won't pause during printing." +msgstr "" + +msgid "" +"The filament type setting of external spool is different from the filament " +"in the slicing file." +msgstr "" + +msgid "" +"The printer type selected when generating G-code is not consistent with the " "currently selected printer. It is recommended that you use the same printer " "type for slicing." msgstr "" "產生 G-code 時選擇的列印設備類型與目前選擇的列印設備不一致。建議您使用相同的" "列印設備類型進行切片。" -#, fuzzy msgid "" "There are some unknown filaments in the AMS mappings. Please check whether " "they are the required filaments. If they are okay, press \"Confirm\" to " "start printing." msgstr "" -"AMS 映射中存在一些未知的線材。請檢查是否符合預期線材。如果符合，按“確定”以開" -"始列印作業。" +"AMS 設定中存在一些未知的線材。請檢查是否符合所需的線材。如果符合，按『確定』" +"以開始列印作業。" -#, c-format, boost-format -msgid "nozzle in preset: %s %s" -msgstr "" - -#, c-format, boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" - -#, c-format, boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" +msgid "Please check the following:" +msgstr "請檢查以下內容：" msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "" +msgstr "請排除上述錯誤，否則無法繼續列印。" msgid "" "Please click the confirm button if you still want to proceed with printing." -msgstr "如果您仍然想繼續列印，請滑鼠左鍵點擊 確定 按鈕。" - -#, fuzzy -msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "正在連接列印設備。連接過程中無法取消。" +msgstr "如果您仍然想繼續列印，請滑鼠左鍵點擊『確定』按鈕。" msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgstr "小心使用！金屬紋理 PEI 板 上的流量校準可能會因表面光線散射而失敗。" - -msgid "Automatic flow calibration using Micro Lidar" -msgstr "使用微型雷射雷達進行自動流量校準" - -#, fuzzy -msgid "Modifying the device name" -msgstr "修改列印設備名稱" - -msgid "Bind with Pin Code" +"This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" -#, fuzzy -msgid "Send to Printer SD card" -msgstr "傳送到列印設備的 SD 記憶卡" +msgid "" +"This process determines the dynamic flow values to improve overall print " +"quality." +msgstr "" + +msgid "Preparing print job" +msgstr "正在準備列印作業" + +msgid "The name length exceeds the limit." +msgstr "名稱長度超過限制。" + +#, c-format, boost-format +msgid "Cost %dg filament and %d changes more than optimal grouping." +msgstr "" + +msgid "nozzle" +msgstr "" + +msgid "both extruders" +msgstr "" + +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + +#, c-format, boost-format +msgid "" +"The %s diameter(%.1fmm) of current printer doesn't match with the slicing " +"file (%.1fmm). Please make sure the nozzle installed matches with settings " +"in printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The current nozzle diameter (%.1fmm) doesn't match with the slicing file " +"(%.1fmm). Please make sure the nozzle installed matches with settings in " +"printer, then set the corresponding printer preset when slicing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The hardness of current material (%s) exceeds the hardness of %s(%s). Please " +"verify the nozzle or material settings and try again." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s may soften. Please unload." +msgstr "" + +#, c-format, boost-format +msgid "The filament on %s is unknown and may soften. Please set filament." +msgstr "" + +msgid "" +"Unable to automatically match to suitable filament. Please click to manually " +"match." +msgstr "" + +msgid "Cool" +msgstr "" + +msgid "Engineering" +msgstr "" + +msgid "High Temp" +msgstr "" + +msgid "Cool(Supertack)" +msgstr "" + +msgid "Click here if you can't connect to the printer" +msgstr "如果無法連接到列印設備，請按一下此處" + +msgid "No login account, only printers in LAN mode are displayed." +msgstr "未登入帳號，僅顯示區域網路模式的列印設備" + +msgid "Connecting to server..." +msgstr "正在連接伺服器..." + +msgid "Synchronizing device information..." +msgstr "正在同步設備資訊" + +msgid "Synchronizing device information timed out." +msgstr "同步設備資訊逾時" + +msgid "Cannot send a print job when the printer is not at FDM mode." +msgstr "" + +msgid "Cannot send a print job while the printer is updating firmware." +msgstr "設備升級中，無法傳送列印作業" + +msgid "" +"The printer is executing instructions. Please restart printing after it ends." +msgstr "列印設備正在執行指令，請在指令結束後重新開始列印" + +msgid "AMS is setting up. Please try again later." +msgstr "" + +msgid "Please do not mix-use the Ext with AMS." +msgstr "" + +msgid "" +"Invalid nozzle information, please refresh or manually set nozzle " +"information." +msgstr "" + +msgid "Storage needs to be inserted before printing via LAN." +msgstr "" + +msgid "Storage is in abnormal state or is in read-only mode." +msgstr "" + +msgid "Storage needs to be inserted before printing." +msgstr "" + +msgid "" +"Cannot send the print job to a printer whose firmware is required to get " +"updated." +msgstr "機台需要更新韌體才能接收列印作業。" + +msgid "Cannot send a print job for an empty plate." +msgstr "無法傳送空的列印板" + +msgid "Storage needs to be inserted to record timelapse." +msgstr "" + +msgid "" +"You have selected both external and AMS filaments for an extruder. You will " +"need to manually switch the external filament during printing." +msgstr "" + +msgid "" +"TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics " +"calibration." +msgstr "" + +msgid "" +"Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." +msgstr "" + +msgid "This printer does not support printing all plates." +msgstr "此列印設備類型不支援列印所有列印板" + +msgid "" +"Please cold pull before printing TPU to avoid clogging. You may use cold " +"pull maintenance on the printer." +msgstr "" + +msgid "High chamber temperature is required. Please close the door." +msgstr "" + +msgid "Please refer to Wiki before use->" +msgstr "" + +msgid "Send to Printer storage" +msgstr "" + +msgid "Try to connect" +msgstr "" + +msgid "click to retry" +msgstr "" + +msgid "Upload file timeout, please check if the firmware version supports it." +msgstr "" + +msgid "" +"No available external storage was obtained. Please confirm and try again." +msgstr "" + +msgid "" +"Media capability acquisition timeout, please check if the firmware version " +"supports it." +msgstr "" + +msgid "" +"Please check the network and try again, You can restart or update the " +"printer if the issue persists." +msgstr "" + +msgid "Sending..." +msgstr "" + +msgid "" +"File upload timed out. Please check if the firmware version supports this " +"operation or verify if the printer is functioning properly." +msgstr "" + +msgid "Sending failed, please try again!" +msgstr "" + +msgid "Connection failed. Click the icon to retry" +msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "設備升級中，無法傳送列印作業" -#, fuzzy msgid "The selected printer is incompatible with the chosen printer presets." msgstr "所選列印設備與選擇的列印設備預設檔不相容。" -#, fuzzy -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "傳送到列印設備需要插入 SD 記憶卡" +msgid "Storage needs to be inserted before send to printer." +msgstr "" -#, fuzzy msgid "The printer is required to be in the same LAN as Snapmaker Orca." msgstr "列印設備需要與 Snapmaker Orca 在同一個區域網路內。" -#, fuzzy -msgid "The printer does not support sending to printer SD card." -msgstr "該列印設備不支援傳送到 SD 記憶卡。" +msgid "The printer does not support sending to printer storage." +msgstr "" msgid "Slice ok." -msgstr "切片完成." +msgstr "切片完成。" msgid "View all Daily tips" -msgstr "" +msgstr "顯示所有每日提示" msgid "Failed to create socket" msgstr "建立網路端點連線失敗" @@ -7305,15 +8394,14 @@ msgid "Failed to publish login request" msgstr "請求登陸失敗" msgid "Get ticket from device timeout" -msgstr "" +msgstr "從設備取得票證超時" msgid "Get ticket from server timeout" -msgstr "" +msgstr "從伺服器取得票證超時" msgid "Failed to post ticket to server" -msgstr "" +msgstr "將票證提交到伺服器失敗" -#, fuzzy msgid "Failed to parse login report reason" msgstr "無法解析登入回覆" @@ -7327,29 +8415,29 @@ msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" +"請在印表設備螢幕上的帳戶頁面找到 PIN 碼，\n" +"並在下面輸入 PIN 碼。" msgid "Can't find Pin Code?" -msgstr "" +msgstr "找不到Pin?" msgid "Pin Code" -msgstr "" +msgstr "Pin" msgid "Binding..." -msgstr "" +msgstr "綁定..." msgid "Please confirm on the printer screen" -msgstr "" +msgstr "請到機台上按確認" msgid "Log in failed. Please check the Pin Code." -msgstr "" +msgstr "登入失敗。請檢查 Pin碼。" -#, fuzzy msgid "Log in printer" msgstr "登入列印設備" -#, fuzzy -msgid "Would you like to log in this printer with current account?" -msgstr "你想使用目前帳號登入這台列印設備嗎?" +msgid "Would you like to log in to this printer with the current account?" +msgstr "您想使用目前帳號登入這台列印設備嗎?" msgid "Check the reason" msgstr "查看原因" @@ -7361,30 +8449,30 @@ msgid "Terms and Conditions" msgstr "使用者協議" msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the termsand conditions.By clicking to agree to use your " -"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " +"Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab " +"device, please read the terms and conditions. By clicking to agree to use " +"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " +"Use (collectively, the \"Terms\"). If you do not comply with or agree to the " "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "" -"感謝您購買 Bambu Lab 設備，使用 Bambu Lab 設備前，請閱讀一下條款，點擊同意使" -"用您的 Bambu Lab 設備即表示您同意遵守隱私政策以及使用條款（統稱為 條款 ）。如" -"果您不願遵守或不同意 Bambu Lab 隱私政策，請不要使用 Bambu Lab 設備和服務。" +"感謝您購買 Bambu Lab 設備。在使用 Bambu Lab 設備之前，請先閱讀條款與條件。點" +"擊同意使用 Bambu Lab 設備，即表示您同意遵守隱私政策與使用條款（以下統稱「條" +"款」）。若您不同意或無法遵守 Bambu Lab 隱私政策，請勿使用 Bambu Lab 的設備及" +"服務。" msgid "and" -msgstr "" +msgstr "與" msgid "Privacy Policy" msgstr "隱私協議" -#, fuzzy msgid "We ask for your help to improve everyone's printer" msgstr "我們請求您的幫助來改善大家的列印設備" msgid "Statement about User Experience Improvement Program" msgstr "關於使用者體驗改善計劃的聲明" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "In the 3D Printing community, we learn from each other's successes and " "failures to adjust our own slicing parameters and settings. %s follows the " @@ -7392,19 +8480,18 @@ msgid "" "successes and failures of the vast number of prints by our users. We are " "training %s to be smarter by feeding them the real-world data. If you are " "willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." +"logs, which may include information described in Privacy Policy. We will not " +"collect any Personal Data by which an individual can be identified directly " +"or indirectly, including without limitation names, addresses, payment " +"information, or phone numbers. By enabling this service, you agree to these " +"terms and the statement about Privacy Policy." msgstr "" -"在 3D 列印社區，我們從彼此的成功和失敗中學習調整自己的切片參數和設定。%s 遵循" -"同樣的原則，透過機器學習的方式從大量使用者列印的成功和失敗中獲取經驗，從而改" -"善列印性能。我們正在透過向 %s 提供真實世界的資料來訓練他們變得更聰明。如果您" -"願意，此服務將訪問您的錯誤日誌和使用日誌中的資訊，其中可能包括隱私政策中描述" -"的資料。我們不會收集任何可以直接或間接識別個人的個人資料，包括但不限於姓名、" -"地址、支付資訊或電話號碼。啟用此服務即表示您同意這些條款和有關隱私政策的聲" -"明。" +"在 3D 列印社群中，我們通過分享彼此的成功與失敗經驗來調整切片參數與設置。%s 也" +"採用了相同的原則，利用機器學習，透過使用者的大量列印成功與失敗資料來提升其性" +"能。我們正以實際應用資料來訓練 %s，使其變得更智能。如果您願意，這項服務將存取" +"您的錯誤日誌和使用日誌，其中可能包含隱私政策中提到的相關資訊。我們不會收集任" +"何可直接或間接識別個人身份的個人資料，包括但不限於姓名、地址、支付資訊或電話" +"號碼。啟用此服務即表示您同意這些條款及隱私政策聲明。" msgid "Statement on User Experience Improvement Plan" msgstr "關於使用者體驗改善計劃的聲明" @@ -7412,18 +8499,15 @@ msgstr "關於使用者體驗改善計劃的聲明" msgid "Log in successful." msgstr "登入成功。" -#, fuzzy msgid "Log out printer" msgstr "登出列印設備" -#, fuzzy msgid "Would you like to log out the printer?" -msgstr "你想登出列印設備嗎?" +msgstr "您想登出列印設備嗎?" msgid "Please log in first." msgstr "請先登入。" -#, fuzzy msgid "There was a problem connecting to the printer. Please try again." msgstr "連接列印設備時發生錯誤。 重新連接。" @@ -7431,7 +8515,7 @@ msgid "Failed to log out." msgstr "登出失敗。" #. TRN "Save current Settings" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Save current %s" msgstr "儲存目前 %s" @@ -7439,43 +8523,63 @@ msgid "Delete this preset" msgstr "刪除此預設" msgid "Search in preset" -msgstr "在預設中搜索" +msgstr "在預設中搜尋" -#, fuzzy msgid "Click to reset all settings to the last saved preset." msgstr "點擊以將所有設定還原到最後一次儲存的版本。" -#, fuzzy msgid "" -"Prime tower is required for smooth timeplase. There may be flaws on the " +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Are you sure you want to disable prime tower?" msgstr "" -"平滑模式的縮時錄影需要擦拭塔，否則列印物件上可能會有瑕疵。確定要關閉擦拭塔" -"嗎？" +"平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要關閉換料" +"塔？" -#, fuzzy msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " +"Enabling both precise Z height and the prime tower may cause the size of " +"prime tower to increase. Do you still want to enable?" +msgstr "同時啟用精確 Z 軸高度與換料塔功能，可能會讓換料塔變大。是否仍要啟用？" + +msgid "" +"A prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Are you sure you want to disable prime tower?" +msgstr "" + +msgid "" +"Prime tower is required for clumping detection. There may be flaws on the " +"model without prime tower. Do you still want to enable clumping detection?" +msgstr "" + +msgid "" +"A prime tower is required for smooth timelapse. There may be flaws on the " "model without prime tower. Do you want to enable prime tower?" msgstr "" -"平滑模式的縮時錄影需要擦拭塔，否則列印物件上可能會有瑕疵。要打開擦拭塔嗎？" +"平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要啟用換料" +"塔？" msgid "Still print by object?" +msgstr "持續逐件列印？" + +msgid "" +"Non-soluble support materials are not recommended for support base.\n" +"Are you sure to use them for support base?\n" msgstr "" #, fuzzy msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +"When using support material for the support interface, we recommend the " +"following settings:\n" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and " +"disable independent support layer height." msgstr "" -"我們增加了一種實驗性的支撐樣式 \"苗條樹\"，它的特點是支撐體積較小，但強度較" -"弱。\n" -"因此我們推薦以下參數：接觸層數為 0，頂部Z距離為 0，牆層數為 2。" +"當使用支撐材質作為支撐界面時，我們建議使用以下設定：\n" +"•頂部 Z 距離：0\n" +"•接觸面間距：0\n" +"•交錯直線填充模式\n" +"•停用獨立支撐層高" -#, fuzzy msgid "" -"Change these settings automatically? \n" +"Change these settings automatically?\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" @@ -7483,76 +8587,154 @@ msgstr "" "是 - 自動調整這些設定\n" "否 - 不用為我調整這些設定" -#, fuzzy msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"對於 \"強壯樹 \"和 \"混合樹 \"的支撐樣式，我們推薦以下設定：至少 2 層界面層，" -"至少 0.1 毫米的頂部z距離或使用專用的支撐線材。" - -#, fuzzy -msgid "" -"When using support material for the support interface, We recommend the " +"When using soluble material for the support interface, we recommend the " "following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable " -"independent support layer height" +"0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, " +"disable independent support layer height\n" +"and use soluble materials for both support interface and support base." msgstr "" -"當使用專用的支撐線材時，我們推薦以下設定：\n" -"0 頂層z距離，0 接觸層間距，同心圖案，並且禁用獨立支撐層高" msgid "" "Enabling this option will modify the model's shape. If your print requires " "precise dimensions or is part of an assembly, it's important to double-check " "whether this change in geometry impacts the functionality of your print." msgstr "" +"啟用此選項將會改變模型形狀。如果您的列印需要精準的尺寸或屬於組裝件的一部分，" +"請務必再次確認此幾何形狀的更改是否會影響您的列印。" msgid "Are you sure you want to enable this option?" +msgstr "您確定要啟用此選項嗎？" + +msgid "" +"Infill patterns are typically designed to handle rotation automatically to " +"ensure proper printing and achieve their intended effects (e.g., Gyroid, " +"Cubic). Rotating the current sparse infill pattern may lead to insufficient " +"support. Please proceed with caution and thoroughly check for any potential " +"printing issues.Are you sure you want to enable this option?" msgstr "" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" +"層高過薄\n" +"將改為 min_layer_height\n" msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." +"height limits, this may cause printing quality issues." msgstr "" +"層高超過了印表設備設定 -> 擠出機 -> 層高限制，這可能會導致列印品質問題。" -msgid "Adjust to the set range automatically? \n" -msgstr "" +msgid "Adjust to the set range automatically?\n" +msgstr "是否自動調整至設定範圍？\n" msgid "Adjust" -msgstr "" +msgstr "調整" msgid "Ignore" msgstr "忽略" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." +"distance during filament changes to minimize flush. Although it can notably " +"reduce flush, it may also elevate the risk of nozzle clogs or other printing " +"complications." msgstr "" +"實驗性功能：在換線過程中以更大的距離收回並切斷線材，以減少沖洗量。儘管這可以" +"顯著減少沖洗，但也可能增加噴嘴堵塞或其他列印問題的風險。" msgid "" "Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " +"distance during filament changes to minimize flush. Although it can notably " "reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." +"complications. Please use with the latest printer firmware." msgstr "" +"實驗性功能：在換線過程中以更大的距離收回並切斷線材，以減少沖洗量。儘管這可以" +"顯著減少沖洗，但也可能增加噴嘴堵塞或其他列印問題的風險。請搭配最新的印表機韌" +"體使用。" -#, fuzzy msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive" "\"->\"Timelapse Wipe Tower\"." msgstr "" -"在錄製無工具頭縮時錄影影片時，建議增加“縮時錄影擦拭塔”\n" -"右鍵單擊列印板的空白位置，選擇“新增標準模型”->“縮時錄影擦拭塔”。" +"在錄製無工具頭縮時錄影影片時，建議新增一個「縮時錄影換料塔」\n" +"可以通過右鍵點擊構建板的空白位置，選擇『新增標準模型』->『縮時錄影換料塔』來" +"進行新增。" + +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "將建立目前系統配置的副本，且該副本將與系統配置分離不相關聯。" + +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "目前的自訂配置將與父系統配置分離不相關聯。" + +msgid "Modifications to the current profile will be saved." +msgstr "目前設定檔的修改將會保存下來。" + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"此操作無法還原。\n" +"您確定要繼續嗎？" + +msgid "Detach preset" +msgstr "解除預設" + +msgid "This is a default preset." +msgstr "預設配置。" + +msgid "This is a system preset." +msgstr "這是系統預設配置。" + +msgid "Current preset is inherited from the default preset." +msgstr "目前的配置繼承自預設配置。" + +msgid "Current preset is inherited from" +msgstr "目前的配置繼承自" + +msgid "It can't be deleted or modified." +msgstr "它無法被刪除或修改。" + +msgid "" +"Any modifications should be saved as a new preset inherited from this one." +msgstr "若要進行任何修改，請另存為一個新的預設配置，並繼承自此預設配置。" + +msgid "To do that please specify a new name for the preset." +msgstr "為此，請為新的預設配置指定一個名稱。" + +msgid "Additional information:" +msgstr "其他資訊：" + +msgid "vendor" +msgstr "供應商" + +msgid "printer model" +msgstr "列印設備型號" + +msgid "default print profile" +msgstr "預設列印設定檔" + +msgid "default filament profile" +msgstr "預設線材設定檔" + +msgid "default SLA material profile" +msgstr "預設 SLA 材料設定檔" + +msgid "default SLA print profile" +msgstr "預設 SLA 列印設定檔" + +msgid "full profile name" +msgstr "完整設定檔名稱" + +msgid "symbolic profile name" +msgstr "簡易設定檔名稱" msgid "Line width" msgstr "線寬" @@ -7567,13 +8749,13 @@ msgid "Wall generator" msgstr "牆產生器" msgid "Walls and surfaces" -msgstr "" +msgstr "牆與表面" msgid "Bridging" -msgstr "" +msgstr "橋接" msgid "Overhangs" -msgstr "" +msgstr "懸空" msgid "Walls" msgstr "牆" @@ -7587,23 +8769,20 @@ msgstr "首層速度" msgid "Other layers speed" msgstr "其他層速度" -#, fuzzy msgid "Overhang speed" msgstr "懸空列印速度" -#, fuzzy msgid "" "This is the speed for various overhang degrees. Overhang degrees are " "expressed as a percentage of line width. 0 speed means no slowing down for " "the overhang degree range and wall speed is used" msgstr "" -"不同懸空程度的列印速度。懸空程度使用相對於線寬的百分比表示。速度為 0 代表這個" -"懸空程度範圍內不降速，直接使用牆的速度" +"此設置是為不同懸空角度指定的速度。懸空角度以線寬的百分比表示。若速度設置為 " +"0，表示該懸空角度範圍內不會減速，將使用牆面速度" msgid "Bridge" msgstr "橋接" -#, fuzzy msgid "Set speed for external and internal bridges" msgstr "設定外部和內部橋接的速度" @@ -7619,18 +8798,29 @@ msgstr "抖動（XY軸）" msgid "Raft" msgstr "筏層" -#, fuzzy msgid "Support filament" msgstr "支撐線材" +msgid "Support ironing" +msgstr "" + msgid "Tree supports" msgstr "樹狀支撐" -msgid "Skirt" -msgstr "側裙" +msgid "Multimaterial" +msgstr "多線材" msgid "Prime tower" -msgstr "擦拭塔" +msgstr "換料塔" + +msgid "Filament for Features" +msgstr "用於特徵的線材" + +msgid "Ooze prevention" +msgstr "防止漏料" + +msgid "Skirt" +msgstr "Skirt" msgid "Special mode" msgstr "特殊模式" @@ -7641,7 +8831,6 @@ msgstr "G-code 輸出" msgid "Post-processing Scripts" msgstr "後處理腳本" -#, fuzzy msgid "Notes" msgstr "備註" @@ -7659,7 +8848,7 @@ msgid_plural "" "estimation." msgstr[0] "" "以下行 %s 包含保留關鍵字。\n" -"請將其移除，否則將影響 G-code 視覺化和列印時間估計。" +"請將其移除，否則將影響 G-code 的視覺化和列印時間估算。" msgid "Reserved keywords found" msgstr "偵測到保留的關鍵字" @@ -7670,126 +8859,110 @@ msgstr "參數覆蓋" msgid "Retraction" msgstr "回抽" -#, fuzzy msgid "Basic information" msgstr "基本資訊" msgid "Recommended nozzle temperature" msgstr "建議噴嘴溫度" -#, fuzzy msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "該線材的建議噴嘴溫度範圍。0 表示未設定" -#, fuzzy +msgid "Flow ratio and Pressure Advance" +msgstr "流量比與壓力提前" + msgid "Print chamber temperature" msgstr "列印設備內部溫度" msgid "Print temperature" msgstr "列印溫度" -msgid "Nozzle" -msgstr "噴嘴" - -msgid "Left Nozzle" -msgstr "左噴嘴" - -msgid "Right Nozzle" -msgstr "右噴嘴" - msgid "Nozzle temperature when printing" msgstr "列印時的噴嘴溫度" -#, fuzzy -msgid "Cool plate" +msgid "Cool Plate (SuperTack)" +msgstr "低溫增穩列印板" + +msgid "" +"Bed temperature when the Cool Plate SuperTack is installed. A value of 0 " +"means the filament does not support printing on the Cool Plate SuperTack." +msgstr "" + +msgid "Cool Plate" msgstr "低溫列印板" -#, fuzzy msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" -msgstr "使用低溫列印板時的熱床溫度。0 值表示這個線材不支援低溫列印板" +"Bed temperature when the Cool Plate is installed. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "使用低溫列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於低溫列印板" -msgid "Textured Cool plate" +msgid "Textured Cool Plate" +msgstr "低溫紋理列印板" + +msgid "" +"Bed temperature when the Textured Cool Plate is installed. A value of 0 " +"means the filament does not support printing on the Textured Cool Plate." msgstr "" +"使用紋理低溫列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於低溫紋理列印板" + +msgid "Engineering Plate" +msgstr "工程列印板" msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" -msgstr "" +"Bed temperature when the Engineering Plate is installed. A value of 0 means " +"the filament does not support printing on the Engineering Plate." +msgstr "使用工程列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於工程列印板" -#, fuzzy -msgid "Engineering plate" -msgstr "工程高溫列印板" - -#, fuzzy -msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" -msgstr "使用工程高溫列印板時的熱床溫度。0 值表示這個線材不支援工程高溫列印板" - -#, fuzzy msgid "Smooth PEI Plate / High Temp Plate" -msgstr "光滑面 PEI 列印板/高溫列印板" +msgstr "平滑 PEI 列印板 / 高溫列印板" -#, fuzzy msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" +"Bed temperature when the Smooth PEI Plate/High Temperature Plate is " +"installed. A value of 0 means the filament does not support printing on the " +"Smooth PEI Plate/High Temp Plate." msgstr "" -"使用光滑面 PEI 列印板/高溫列印板時的熱床溫度。0 值表示這個線材不支援光滑面列" -"印板/高溫列印板" +"使用平滑 PEI 列印板 / 高溫列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於" +"平滑 PEI 列印板 / 高溫列印板" -#, fuzzy msgid "Textured PEI Plate" -msgstr "金屬紋理 PEI 列印板" +msgstr "紋理 PEI 列印板" -#, fuzzy msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" +"Bed temperature when the Textured PEI Plate is installed. A value of 0 means " +"the filament does not support printing on the Textured PEI Plate." msgstr "" -"使用金屬紋理 PEI 列印板時的熱床溫度。0 值表示這個線材不支援金屬紋理 PEI 列印" +"使用紋理 PEI 列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於紋理 PEI 列印" "板" msgid "Volumetric speed limitation" msgstr "體積流量速度限制" -msgid "Cooling" -msgstr "冷卻" - msgid "Cooling for specific layer" msgstr "特定層冷卻" -#, fuzzy msgid "Part cooling fan" -msgstr "部件冷卻風扇" +msgstr "物件冷卻風扇" msgid "Min fan speed threshold" msgstr "最小風扇速度臨界值" -#, fuzzy msgid "" "Part cooling fan speed will start to run at min speed when the estimated " "layer time is no longer than the layer time in setting. When layer time is " "shorter than threshold, fan speed is interpolated between the minimum and " "maximum fan speed according to layer printing time" msgstr "" -"當預計的層時間不大於設定的層時間時，部件冷卻風扇速度將開始以最小速度運轉。當" -"層時間小於設定值時，風扇速度將根據該層列印時間在最小和最大風扇速度之間自動調" -"整" +"當預計的層時間小於設定的層時間時，物件冷卻風扇速度將開始以最小速度運轉。當層" +"時間小於設定值時，風扇速度將根據該層列印時間在最小和最大風扇速度之間自動調整" msgid "Max fan speed threshold" msgstr "最大風扇速度臨界值" -#, fuzzy msgid "" "Part cooling fan speed will be max when the estimated layer time is shorter " "than the setting value" -msgstr "當預計的層列印時間比設定值要小時，部件冷卻風扇轉速將達到最大值" +msgstr "當預計的層列印時間比設定值要小時，物件冷卻風扇轉速將達到最大值" -#, fuzzy msgid "Auxiliary part cooling fan" msgstr "輔助冷卻風扇" @@ -7802,41 +8975,46 @@ msgstr "列印期間" msgid "Complete print" msgstr "列印完成" -#, fuzzy msgid "Filament start G-code" msgstr "線材起始 G-code" msgid "Filament end G-code" msgstr "線材結束 G-code" -msgid "Multimaterial" -msgstr "多線材" - msgid "Wipe tower parameters" -msgstr "色塔參數" +msgstr "換料塔參數" -#, fuzzy -msgid "Toolchange parameters with single extruder MM printers" -msgstr "單擠出機多線材列印設備換色參數" +msgid "Multi Filament" +msgstr "" -#, fuzzy -msgid "Ramming settings" -msgstr "尖端成型設定" +msgid "Tool change parameters with single extruder MM printers" +msgstr "適用於單擠出機多材料印表機的工具切換參數" -#, fuzzy -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "多擠出機多線材列印設備換色參數" +msgid "Set" +msgstr "設定" + +msgid "Tool change parameters with multi extruder MM printers" +msgstr "適用於多擠出機多材料印表機的工具切換參數" + +msgid "Dependencies" +msgstr "相依項目" + +msgid "Compatible printers" +msgstr "" + +msgid "Compatible process profiles" +msgstr "相容的切片設定" msgid "Printable space" msgstr "可列印區域" -#. TRN: First argument is parameter name, the second one is the value. +#. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" -msgstr "" +msgstr "參數 %1% 的值無效：%2%" msgid "G-code flavor is switched" -msgstr "" +msgstr "G-code 格式已切換" msgid "Cooling Fan" msgstr "冷卻風扇" @@ -7848,25 +9026,22 @@ msgid "Extruder Clearance" msgstr "擠出機避讓空間" msgid "Adaptive bed mesh" -msgstr "" +msgstr "自適應熱床網格" msgid "Accessory" msgstr "配件" -#, fuzzy -msgid "Machine gcode" +msgid "Machine G-code" msgstr "列印設備 G-code" -#, fuzzy msgid "Machine start G-code" msgstr "列印設備起始 G-code" -#, fuzzy msgid "Machine end G-code" msgstr "列印設備結束 G-code" msgid "Printing by object G-code" -msgstr "" +msgstr "按物件列印的 G-code" msgid "Before layer change G-code" msgstr "換層前 G-code" @@ -7874,20 +9049,23 @@ msgstr "換層前 G-code" msgid "Layer change G-code" msgstr "換層 G-code" -msgid "Time lapse G-code" +msgid "Timelapse G-code" msgstr "縮時錄影 G-code" +msgid "Clumping Detection G-code" +msgstr "" + msgid "Change filament G-code" msgstr "線材更換 G-code" msgid "Change extrusion role G-code" -msgstr "" +msgstr "變更擠出機任務的 G-code" msgid "Pause G-code" msgstr "暫停 G-code" msgid "Template Custom G-code" -msgstr "模板自訂 G-code" +msgstr "自訂 G-code 範本" msgid "Motion ability" msgstr "移動能力" @@ -7895,6 +9073,12 @@ msgstr "移動能力" msgid "Normal" msgstr "普通" +msgid "Resonance Avoidance" +msgstr "避免共振" + +msgid "Resonance Avoidance Speed" +msgstr "避免共振速度" + msgid "Speed limitation" msgstr "速度限制" @@ -7904,21 +9088,42 @@ msgstr "加速度限制" msgid "Jerk limitation" msgstr "抖動限制" -#, fuzzy -msgid "Single extruder multimaterial setup" +msgid "Single extruder multi-material setup" msgstr "單擠出機多線材設定" -msgid "Wipe tower" -msgstr "色塔" +msgid "Number of extruders of the printer." +msgstr "機台擠出機數量。" -msgid "Single extruder multimaterial parameters" +msgid "" +"Single Extruder Multi Material is selected,\n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"已選擇單噴頭多材料模式，\n" +"所有噴頭的直徑必須相同。\n" +"您是否要將所有噴頭的直徑更改為第一噴頭的噴嘴直徑值？" + +msgid "Nozzle diameter" +msgstr "噴嘴直徑" + +msgid "Wipe tower" +msgstr "換料塔" + +msgid "Single extruder multi-material parameters" msgstr "單擠出機多線材參數" +msgid "" +"This is a single extruder multi-material printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"這是一台單噴頭多材料列印機，所有噴頭的直徑將被設置為新的值。您要繼續嗎？" + msgid "Layer height limits" msgstr "層高限制" -msgid "Lift Z Enforcement" -msgstr "強化抬Z策略" +msgid "Z-Hop" +msgstr "Z 軸抬升" msgid "Retraction when switching material" msgstr "切換線材時的回抽量" @@ -7928,12 +9133,21 @@ msgid "" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"使用韌體回抽模式時，擦拭選項不可用。\n" -"是否禁用擦拭選項來啟用韌體回抽？" +"當使用韌體回抽模式時，擦拭選項不可用。\n" +"\n" +"是否需要停用擦拭以啟用韌體回抽？" msgid "Firmware Retraction" msgstr "韌體回抽" +msgid "" +"Switching to a printer with different extruder types or numbers will discard " +"or reset changes to extruder or multi-nozzle-related parameters." +msgstr "" + +msgid "Use Modified Value" +msgstr "" + msgid "Detached" msgstr "分離的" @@ -7942,13 +9156,15 @@ msgid "" "%d Filament Preset and %d Process Preset is attached to this printer. Those " "presets would be deleted if the printer is deleted." msgstr "" +"此列印設備含有 %d 線材預設和 %d 列印參數預設。若刪除此列印設備，這些預設將被" +"刪除。" -msgid "Presets inherited by other presets can not be deleted!" -msgstr "" +msgid "Presets inherited by other presets cannot be deleted!" +msgstr "被其他預設繼承的預設無法刪除！" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "" +msgstr[0] "以下預設繼承了此預設。" #. TRN Remove/Delete #, boost-format @@ -7957,33 +9173,26 @@ msgstr "%1% 預設" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." -msgstr[0] "下列預設將被一起刪除。" +msgstr[0] "以下預設將一起被刪除。" -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" - -#, fuzzy, boost-format +#, boost-format msgid "Are you sure to %1% the selected preset?" msgstr "確定要 %1% 所選預設嗎？" -msgid "All" -msgstr "所有" +#, c-format, boost-format +msgid "Left: %s" +msgstr "" -msgid "Set" -msgstr "設定" +#, c-format, boost-format +msgid "Right: %s" +msgstr "" -#, fuzzy msgid "Click to reset current value and attach to the global value." -msgstr "點擊該圖示，恢復到全局的設定數值，並與全局設定同步變化。" +msgstr "點擊該圖示，恢復到全域的設定數值，並與全域設定同步變化。" -#, fuzzy msgid "Click to drop current modify and reset to saved value." -msgstr "點擊該圖示，放棄目前的修改，恢復到上次儲存的數值。" +msgstr "放棄目前的修改，恢復到上次儲存的數值。" -#, fuzzy msgid "Process Settings" msgstr "列印參數設定" @@ -8029,73 +9238,74 @@ msgstr "保留所選項目。" msgid "Transfer the selected options to the newly selected preset." msgstr "將所選項目遷移到新的預設中。" -#, fuzzy, boost-format +#, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" -"儲存所選選項到預設 \n" -"\"%1%\"。" +"將所選的選項儲存到預設\n" +"「%1%」。" -#, fuzzy, boost-format +#, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"將選擇的選項轉移到新選擇的預設 \n" -"\"%1%\"。" +"將所選的選項轉移至新選擇的預設\n" +"「%1%」。" -#, fuzzy, boost-format +#, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "預設 \"%1%\" 包含以下未儲存的修改：" +msgstr "預設「%1%」包含以下未儲存的變更：" -#, fuzzy, boost-format +#, boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it " "contains the following unsaved changes:" -msgstr "預設檔 \"%1%\" 與新的列印設備預設不相容，並且包含以下未儲存的修改：" +msgstr "預設「%1%」與新的列印設備設定檔不相容，且包含以下未儲存的變更：" -#, fuzzy, boost-format +#, boost-format msgid "" "Preset \"%1%\" is not compatible with the new process profile and it " "contains the following unsaved changes:" -msgstr "預設 \"%1%\" 和新的列印品質預設不相容，並且它包含以下未儲存的修改：" +msgstr "預設「%1%」與新的列印參數設定檔不相容，並包含以下未儲存的變更：" #, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "" +msgid "You have changed some settings of preset \"%1%\"." +msgstr "已更改預設「%1%」的一些設定。" msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" +"\n" +"您可以儲存或放棄已修改的預設值。" msgid "" "\n" "You can save or discard the preset values you have modified, or choose to " "transfer the values you have modified to the new preset." msgstr "" +"\n" +"您可以儲存或放棄已修改的預設值，或選擇將修改的數值轉移到新的預設值。" msgid "You have previously modified your settings." -msgstr "" +msgstr "您之前已經對設定進行了修改。" msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer " "the modified values to the new project" msgstr "" +"\n" +"您可以放棄已修改的預設值，或選擇將修改的數值轉移到新專案中" msgid "Extruders count" msgstr "擠出機數量" -#, fuzzy -msgid "General" -msgstr "一般" - msgid "Capabilities" msgstr "能力" -#, fuzzy msgid "Show all presets (including incompatible)" msgstr "顯示所有預設（包括不相容的）" @@ -8104,35 +9314,36 @@ msgstr "選擇要比較的預設" msgid "" "You can only transfer to current active profile because it has been modified." -msgstr "" +msgstr "因為目前的設定檔已被修改，您只能轉移到目前啟用的設定檔。" msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close " "this dialog." msgstr "" +"所選的選項從左側預設移至右側。\n" +"注意：關閉此對話框後，修改後的預設將在設置頁面中自動選取。" msgid "Transfer values from left to right" -msgstr "" +msgstr "將數值從左邊轉移到右邊" msgid "" "If enabled, this dialog can be used for transfer selected values from left " "to right preset." -msgstr "" +msgstr "如果啟用，則此視窗可用於將選定的數值從左邊轉移到右邊的預設值。" msgid "Add File" msgstr "新增檔案" -#, fuzzy msgid "Set as cover" msgstr "設定為封面" msgid "Cover" msgstr "封面" -#, fuzzy, boost-format +#, boost-format msgid "The name \"%1%\" already exists." -msgstr "名字 \"%1%\" 已經存在。" +msgstr "「%1%」已經存在。" msgid "Basic Info" msgstr "基本資訊" @@ -8140,11 +9351,9 @@ msgstr "基本資訊" msgid "Pictures" msgstr "圖片" -#, fuzzy msgid "Bill of Materials" msgstr "材料清單" -#, fuzzy msgid "Assembly Guide" msgstr "組裝說明" @@ -8154,6 +9363,9 @@ msgstr "作者" msgid "Model Name" msgstr "模型名字" +msgid "Description:" +msgstr "描述：" + #, c-format, boost-format msgid "%s Update" msgstr "%s 更新" @@ -8161,107 +9373,253 @@ msgstr "%s 更新" msgid "A new version is available" msgstr "發現新版本" -#, fuzzy msgid "Configuration update" msgstr "設定檔更新" -#, fuzzy -msgid "A new configuration package available, Do you want to install it?" -msgstr "新的設定檔可用，確定要安裝嗎？" +msgid "A new configuration package is available. Do you want to install it?" +msgstr "有新的設定檔可用，是否要安裝？" -msgid "Description:" -msgstr "描述：" - -#, fuzzy msgid "Configuration incompatible" msgstr "設定檔不相容" -#, fuzzy -msgid "the configuration package is incompatible with current application." +msgid "the configuration package is incompatible with the current application." msgstr "設定檔和目前的應用程式不相容。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" +"The configuration package is incompatible with the current application.\n" +"%s will update the configuration package to allow the application to start." msgstr "" -"設定檔和目前的應用程式不相容。\n" -"%s 會更新設定檔，否則無法正常啟動" +"設定檔與目前的應用程式不相容。\n" +"%s 將更新設定檔，否則應用程式將無法啟動" #, c-format, boost-format msgid "Exit %s" msgstr "退出 %s" -#, fuzzy -msgid "the Configuration package is incompatible with current APP." -msgstr "設定檔與目前手機應用程式不相容。" - msgid "Configuration updates" msgstr "組態檔更新" -#, fuzzy msgid "No updates available." -msgstr "以更新到最新。" +msgstr "已經是最新版本。" -#, fuzzy msgid "The configuration is up to date." msgstr "目前設定檔已經是最新版本。" -msgid "Obj file Import color" +msgid "Open Wiki for more information >" +msgstr "" + +msgid "OBJ file import color" +msgstr "Obj 檔案匯入顏色" + +msgid "Some faces don't have color defined." +msgstr "" + +msgid "MTL file exist error, could not find the material:" +msgstr "" + +msgid "Please check OBJ or MTL file." msgstr "" msgid "Specify number of colors:" -msgstr "" +msgstr "指定顏色數量：" -#, c-format, boost-format -msgid "The color count should be in range [%d, %d]." +msgid "Enter or click the adjustment button to modify number again" msgstr "" msgid "Recommended " +msgstr "建議 " + +msgid "view" msgstr "" -msgid "Current filament colors:" +msgid "Current filament colors" msgstr "" -msgid "Quick set:" +msgid "Matching" +msgstr "" + +msgid "Quick set" msgstr "" msgid "Color match" -msgstr "" +msgstr "顏色匹配" msgid "Approximate color matching." -msgstr "" +msgstr "近似顏色匹配。" msgid "Append" -msgstr "" +msgstr "追加" -msgid "Add consumable extruder after existing extruders." +msgid "Append to existing filaments" msgstr "" msgid "Reset mapped extruders." -msgstr "" +msgstr "重設已映射的擠出機。" -msgid "Cluster colors" -msgstr "" - -msgid "Map Filament" +msgid "Note" msgstr "" msgid "" -"Note:The color has been selected, you can choose OK \n" +"The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." +"Synchronizing AMS filaments will discard your modified but unsaved filament " +"presets.\n" +"Are you sure you want to continue?" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Original" +msgstr "" + +msgid "After mapping" +msgstr "" + +msgid "After overwriting" +msgstr "" + +msgctxt "Sync_AMS" +msgid "Plate" +msgstr "" + +msgid "" +"The connected printer does not match the currently selected printer. Please " +"change the selected printer." +msgstr "" + +msgid "Mapping" +msgstr "" + +msgid "Overwriting" +msgstr "" + +msgid "Reset all filament mapping" +msgstr "" + +msgid "Left Extruder" +msgstr "" + +msgid "(Recommended filament)" +msgstr "" + +msgid "Right Extruder" +msgstr "" + +msgid "Advanced Options" +msgstr "" + +msgid "" +"Check heatbed flatness. Leveling makes extruded height uniform.\n" +"*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." +msgstr "" + +msgid "" +"Calibrate nozzle offsets to enhance print quality.\n" +"*Automatic mode: Check for calibration before printing; skip if unnecessary." +msgstr "" + +msgid "Use AMS" +msgstr "使用AMS" + +msgid "Tip" +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" + +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + +msgid "Advanced settings" +msgstr "" + +msgid "Add unused AMS filaments to filaments list." +msgstr "" + +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + +msgid "After being synced, this action cannot be undone." +msgstr "" + +msgid "" +"After being synced, the project's filament presets and colors will be " +"replaced with the mapped filament types and colors. This action cannot be " +"undone." +msgstr "" + +msgid "Are you sure to synchronize the filaments?" +msgstr "" + +msgid "Synchronize now" +msgstr "" + +msgid "Synchronize Filament Information" +msgstr "" + +msgid "Add unused filaments to filaments list." +msgstr "" + +msgid "" +"Only synchronize filament type and color, not including slot information." +msgstr "" + +msgid "Ext spool" +msgstr "" + +msgid "" +"Please check whether the nozzle type of the device is the same as the preset " +"nozzle type." +msgstr "" + +msgid "Storage is not available or is in read-only mode." +msgstr "" + +#, c-format, boost-format +msgid "" +"The selected printer (%s) is incompatible with the chosen printer profile in " +"the slicer (%s)." +msgstr "選定的列印設備（%s）與切片軟體中選擇的列印設備設定檔（%s）不相容。" + +msgid "" +"Timelapse is not supported because Print sequence is set to \"By object\"." +msgstr "「逐件列印」模式下不支援縮時錄影。" + +msgid "" +"You selected external and AMS filament at the same time in an extruder, you " +"will need manually change external filament." +msgstr "" + +msgid "Successfully synchronized nozzle information." +msgstr "" + +msgid "Successfully synchronized nozzle and AMS number information." +msgstr "" + +msgid "Continue to sync filaments" +msgstr "" + +msgctxt "Sync_Nozzle_AMS" +msgid "Cancel" +msgstr "" + +msgid "Successfully synchronized color and type of filament from printer." +msgstr "" + +msgctxt "FinishSyncAms" +msgid "OK" msgstr "" -#, fuzzy msgid "Ramming customization" msgstr "自訂尖端成型" -#, fuzzy msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " @@ -8273,118 +9631,108 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"尖端成型是指在單擠出機多線材印表機中換色之前的快速抽插。\n" +"尖端成型是指在單擠出機多線材列印設備中換色之前的快速抽插。\n" "其目的是使退出的線材末端正確成形，這樣就不會妨礙新線材的插入，並可以重新插" "入。\n" "這個階段很重要，不同的線材可能需要不同的擠出速度才能獲得良好的形狀。因此尖端" "成型過程中的擠壓率是需要可調整的。\n" -"這是一個專業的設定，不正確的調整可能會導致堵塞、擠出機齒輪刨料等。" +"這是一個進階的設定，不正確的調整可能會導致堵塞、線材磨損等。" -#, fuzzy -msgid "Total ramming time" -msgstr "尖端成型總時間" +#, boost-format +msgid "For constant flow rate, hold %1% while dragging." +msgstr "若要保持固定流速，拖曳時請按住 %1%。" -msgid "s" -msgstr "秒" +msgid "Total ramming" +msgstr "總擠出量" -#, fuzzy -msgid "Total rammed volume" -msgstr "尖端成型總體積" +msgid "Volume" +msgstr "體積" -#, fuzzy -msgid "Ramming line width" -msgstr "尖端成型線寬" - -#, fuzzy -msgid "Ramming line spacing" -msgstr "尖端成型線間距" - -msgid "Auto-Calc" -msgstr "自動計算" - -msgid "Re-calculate" -msgstr "" - -msgid "Flushing volumes for filament change" -msgstr "線材更換時產生的廢料體積" +msgid "Ramming line" +msgstr "擠出線" msgid "" "Orca would re-calculate your flushing volumes everytime the filaments color " -"changed. You could disable the auto-calculate in Snapmaker Orca > Preferences" +"changed or filaments changed. You could disable the auto-calculate in Orca " +"Slicer > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." msgstr "在兩個線材間切換所需的廢料體積（mm³）" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "建議：廢料體積量應設定在[ %d, %d ]範圍內" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "倍數的數值範圍是[%.2f, %.2f]" -#, fuzzy +msgid "Re-calculate" +msgstr "重新計算" + +msgid "Left extruder" +msgstr "" + +msgid "Right extruder" +msgstr "" + msgid "Multiplier" msgstr "倍數" -msgid "unloaded" -msgstr "退料" +msgid "Flushing volumes for filament change" +msgstr "線材更換時產生的廢料體積" -msgid "loaded" -msgstr "進料" - -msgid "Filament #" -msgstr "線材#" - -msgid "From" -msgstr "從" - -msgid "To" +msgid "Please choose the filament colour" msgstr "" msgid "" "Windows Media Player is required for this task! Do you want to enable " "'Windows Media Player' for your operation system?" msgstr "" +"執行此設置需要 Windows Media Player！您是否要啟用 Windows Media Player？" msgid "" "BambuSource has not correctly been registered for media playing! Press Yes " "to re-register it. You will be promoted twice" msgstr "" +"「BambuSource 未正確註冊為媒體播放模組！請點擊『是』進行重新註冊，過程中會有" +"兩次提示" msgid "" "Missing BambuSource component registered for media playing! Please re-" -"install BambuStutio or seek after-sales help." -msgstr "" +"install BambuStudio or seek after-sales help." +msgstr "缺少 BambuSource 媒體播放組件！請重新安裝 BambuStudio 或聯繫售後支援。" msgid "" "Using a BambuSource from a different install, video play may not work " "correctly! Press Yes to fix it." msgstr "" +"BambuSource 來自其他安裝版本，可能導致影片播放異常！請點擊『是』進行修復。" msgid "" "Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" +"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" "libav packages, then restart Snapmaker Orca?)" msgstr "" +"您的系統缺少 GStreamer 的 H.264 編解碼器，這是播放影片所必需的。（請嘗試安裝 " +"gstreamer1.0-plugins-bad 或 gstreamer1.0-libav 套件，然後重新啟動 Orca " +"Slicer。）" msgid "Bambu Network plug-in not detected." -msgstr "" +msgstr "未偵測到 Bambu 網路外掛程式。" msgid "Click here to download it." -msgstr "" +msgstr "點擊下載。" msgid "Login" msgstr "登入" -#, fuzzy msgid "The configuration package is changed in previous Config Guide" -msgstr "設定檔在之前的設定引導過程中以改變" +msgstr "設定檔在之前的設定引導過程中已改變" -#, fuzzy msgid "Configuration package changed" -msgstr "設定檔以改變" +msgstr "設定檔已改變" msgid "Toolbar" msgstr "工具欄" @@ -8392,143 +9740,95 @@ msgstr "工具欄" msgid "Objects list" msgstr "物件清單" -#, fuzzy msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "從 STL/STEP/3MF/OBJ/AMF 檔案中匯入幾何數據" - -msgid "⌘+Shift+G" -msgstr "" - -msgid "Ctrl+Shift+G" -msgstr "" +msgstr "從 STL/STEP/3MF/OBJ/AMF 檔案中匯入幾何模型" msgid "Paste from clipboard" msgstr "從剪貼簿貼上" -#, fuzzy msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "顯示/隱藏 3Dconnexion 設備的設定對話框" msgid "Switch table page" -msgstr "" +msgstr "切換表單頁面" msgid "Show keyboard shortcuts list" msgstr "顯示鍵盤快捷鍵清單" -#, fuzzy msgid "Global shortcuts" -msgstr "全局快捷鍵" - -msgid "Rotate View" -msgstr "旋轉視角" +msgstr "全域快捷鍵" msgid "Pan View" msgstr "移動視角" -msgid "Mouse wheel" -msgstr "滑鼠滾輪" +msgid "Rotate View" +msgstr "旋轉視角" msgid "Zoom View" msgstr "縮放視角" -msgid "Shift+A" -msgstr "" - -msgid "Shift+R" -msgstr "" - -#, fuzzy msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." +"Auto orients selected objects or all objects. If there are selected objects, " +"it just orients the selected ones. Otherwise, it will orient all objects in " +"the current project." msgstr "" -"自動調整選取零件/所有零件的方向，\n" -"有選取零件時調整選取零件的方向，沒有選取零件時調整目前列印板所有零件的方向" +"自动调整选定零件/所有零件的方向,\n" +"有选定零件时调整选定零件的朝向,\n" +"没有选择零件时调整当项目所有零件的朝向" -msgid "Shift+Tab" -msgstr "" +msgid "Auto orients all objects on the active plate." +msgstr "自动调整活动板上的所有物体的方向。" -#, fuzzy msgid "Collapse/Expand the sidebar" msgstr "摺疊/展開 側邊欄" -msgid "⌘+Any arrow" -msgstr "⌘+方向鍵" +msgid "Any arrow" +msgstr "" -#, fuzzy msgid "Movement in camera space" msgstr "沿相機視角移動物件" -msgid "⌥+Left mouse button" -msgstr "⌥+滑鼠左鍵" - msgid "Select a part" msgstr "選擇單一零件" -msgid "⌘+Left mouse button" -msgstr "⌘+滑鼠左鍵" - -#, fuzzy msgid "Select multiple objects" msgstr "選擇多個物件" -msgid "Ctrl+Any arrow" -msgstr "Ctrl+方向鍵" - -msgid "Alt+Left mouse button" -msgstr "Alt+滑鼠左鍵" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+滑鼠左鍵" - -msgid "Shift+Left mouse button" -msgstr "Shift+滑鼠左鍵" - msgid "Select objects by rectangle" msgstr "框選多個零件" msgid "Arrow Up" msgstr "上箭頭" -#, fuzzy msgid "Move selection 10 mm in positive Y direction" msgstr "Y 方向移動 10mm" msgid "Arrow Down" msgstr "下箭頭" -#, fuzzy msgid "Move selection 10 mm in negative Y direction" msgstr "Y 方向移動 10mm" msgid "Arrow Left" msgstr "左箭頭" -#, fuzzy msgid "Move selection 10 mm in negative X direction" msgstr "X 方向移動 10mm" msgid "Arrow Right" msgstr "右箭頭" -#, fuzzy msgid "Move selection 10 mm in positive X direction" msgstr "X 方向移動 10mm" -msgid "Shift+Any arrow" -msgstr "Shift+方向鍵" - -#, fuzzy msgid "Movement step set to 1 mm" msgstr "沿 X、Y 軸以 1mm 為單位步進移動" -#, fuzzy msgid "keyboard 1-9: set filament for object/part" msgstr "按鍵 １～９：設定物件/零件的線材" msgid "Camera view - Default" -msgstr "攝影機視角 - 默認" +msgstr "攝影機視角 - 預設" msgid "Camera view - Top" msgstr "攝影機視角 - 頂部" @@ -8554,17 +9854,23 @@ msgstr "選擇所有物件" msgid "Gizmo move" msgstr "線框移動" +msgid "Gizmo rotate" +msgstr "旋轉物件" + msgid "Gizmo scale" msgstr "線框縮放" -msgid "Gizmo rotate" -msgstr "旋轉物件" +msgid "Gizmo place face on bed" +msgstr "選擇底面" msgid "Gizmo cut" msgstr "切割物件" -msgid "Gizmo Place face on bed" -msgstr "選擇底面" +msgid "Gizmo mesh boolean" +msgstr "線框網格布林運算" + +msgid "Gizmo FDM paint-on fuzzy skin" +msgstr "Gizmo FDM 塗刷絨毛表面效果" msgid "Gizmo SLA support points" msgstr "SLA 支撐點" @@ -8572,8 +9878,17 @@ msgstr "SLA 支撐點" msgid "Gizmo FDM paint-on seam" msgstr "FDM 塗裝接縫" -msgid "Gizmo Text emboss / engrave" -msgstr "" +msgid "Gizmo text emboss/engrave" +msgstr "浮雕/雕刻文字工具" + +msgid "Gizmo measure" +msgstr "測量" + +msgid "Gizmo assemble" +msgstr "組裝" + +msgid "Gizmo brim ears" +msgstr "擴邊耳工具" msgid "Zoom in" msgstr "放大" @@ -8587,36 +9902,22 @@ msgstr "在準備/預覽模式之中切換" msgid "Plater" msgstr "準備" -#, fuzzy msgid "Move: press to snap by 1mm" msgstr "移動：以 1mm 為單位步進移動" -msgid "⌘+Mouse wheel" -msgstr "⌘+滑鼠滾輪" - msgid "Support/Color Painting: adjust pen radius" msgstr "支撐/顏色繪製：調整筆刷半徑" -msgid "⌥+Mouse wheel" -msgstr "⌥+滑鼠滾輪" - msgid "Support/Color Painting: adjust section position" msgstr "支撐/色彩繪製：調整剖面位置" -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+滑鼠滾輪" - -msgid "Alt+Mouse wheel" -msgstr "Alt+滑鼠滾輪" - msgid "Gizmo" -msgstr "" +msgstr "浮雕" -#, fuzzy msgid "Set extruder number for the objects and parts" msgstr "設定物件、零件使用的擠出機編號" -msgid "Delete objects, parts, modifiers " +msgid "Delete objects, parts, modifiers" msgstr "刪除物件、零件、修改器" msgid "Select the object/part and press space to change the name" @@ -8646,158 +9947,163 @@ msgstr "水平滑動條 - 向右移動一步" msgid "On/Off one layer mode of the vertical slider" msgstr "開啟/關閉垂直滑動條的單層模式" -#, fuzzy -msgid "On/Off g-code window" +msgid "On/Off G-code window" msgstr "開啟/關閉 G-code 視窗" msgid "Move slider 5x faster" msgstr "5 倍速移動滑動條" -msgid "Shift+Mouse wheel" -msgstr "Shift+滑鼠滾輪" - msgid "Horizontal slider - Move to start position" -msgstr "" +msgstr "水平滑動條 - 移動到起始位置" msgid "Horizontal slider - Move to last position" -msgstr "" +msgstr "水平滑動條 - 移動到最後位置" msgid "Release Note" msgstr "更新說明" #, c-format, boost-format -msgid "version %s update information :" -msgstr "版本 %s 更新資訊" +msgid "version %s update information:" +msgstr "版本 %s 更新資訊：" -#, fuzzy msgid "Network plug-in update" -msgstr "網路套件升級" +msgstr "網路外掛程式升級" -#, fuzzy msgid "" "Click OK to update the Network plug-in when Snapmaker Orca launches next time." -msgstr "按一下「確定」以在下次啟動 Snapmaker Orca 時更新網路套件" +msgstr "按下『確定』後，下次啟動 Snapmaker Orca 時會更新網路外掛程式。" -#, fuzzy, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "新的網路套件（ %s） 可用，您是否需要安裝它？" +#, c-format, boost-format +msgid "A new Network plug-in (%s) is available. Do you want to install it?" +msgstr "新版的網路外掛程式（%s）可用，是否要安裝？" msgid "New version of Snapmaker Orca" msgstr "新版本的 Snapmaker Orca" msgid "Skip this Version" -msgstr "" - -msgid "Done" -msgstr "完成" - -msgid "resume" -msgstr "" - -msgid "Resume Printing" -msgstr "" - -msgid "Resume Printing(defects acceptable)" -msgstr "" - -msgid "Resume Printing(problem solved)" -msgstr "" - -msgid "Stop Printing" -msgstr "" - -msgid "Check Assistant" -msgstr "" - -msgid "Filament Extruded, Continue" -msgstr "" - -msgid "Not Extruded Yet, Retry" -msgstr "" - -msgid "Finished, Continue" -msgstr "" - -msgid "Load Filament" -msgstr "進料" - -msgid "Filament Loaded, Resume" -msgstr "" - -msgid "View Liveview" -msgstr "" +msgstr "跳過這個版本" msgid "Confirm and Update Nozzle" +msgstr "確認並更新噴嘴" + +msgid "Connect the printer using IP and access code" +msgstr "透過 IP 和訪問代碼連接列印設備" + +msgid "" +"Try the following methods to update the connection parameters and reconnect " +"to the printer." msgstr "" -#, fuzzy -msgid "LAN Connection Failed (Sending print file)" -msgstr "區域網路連接失敗（傳送列印作業）" - -#, fuzzy -msgid "" -"Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." -msgstr "第1步，請確認 Snapmaker Orca 和您的列印設備在同一個區域網路上。" - -#, fuzzy -msgid "" -"Step 2, if the IP and Access Code below are different from the actual values " -"on your printer, please correct them." +msgid "1. Please confirm Snapmaker Orca and your printer are in the same LAN." +msgstr "" + +msgid "" +"2. If the IP and Access Code below are different from the actual values on " +"your printer, please correct them." +msgstr "" + +msgid "" +"3. Please obtain the device SN from the printer side; it is usually found in " +"the device information on the printer screen." msgstr "" -"步驟2, 如果下面的 IP 和訪問碼與列印設備上的實際值不同，請輸入正確的數值。" msgid "IP" -msgstr "" +msgstr "IP" msgid "Access Code" -msgstr "訪問碼" +msgstr "訪問代碼" + +msgid "Printer model" +msgstr "列印設備型號" + +msgid "Printer name" +msgstr "列印設備名稱" -#, fuzzy msgid "Where to find your printer's IP and Access Code?" -msgstr "在哪裡可以找到列印設備的 IP 和訪問碼?" +msgstr "在哪裡可以找到列印設備的 IP 和訪問代碼?" -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "" +msgid "Connect" +msgstr "連線" -msgid "Test" -msgstr "測試" +msgid "Manual Setup" +msgstr "手動設定" msgid "IP and Access Code Verified! You may close the window" -msgstr "" +msgstr "IP 和訪問代碼已驗證！可以關閉視窗" + +msgid "connecting..." +msgstr "連線中..." + +msgid "Failed to connect to printer." +msgstr "無法連接到列印設備。" + +msgid "Failed to publish login request." +msgstr "登入請求傳送失敗。" + +msgid "The printer has already been bound." +msgstr "此印表機已綁定。" + +msgid "The printer mode is incorrect, please switch to LAN Only." +msgstr "列印設備模式錯誤，請切換為 LAN Only 模式。" + +msgid "Connecting to printer... The dialog will close later" +msgstr "正在連接印表機… 對話框將在稍後自動關閉" msgid "Connection failed, please double check IP and Access Code" -msgstr "" +msgstr "連接失敗，請再次檢查 IP 和訪問代碼" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" +"連接失敗！如果 IP 和訪問代碼正確，\n" +"請進入第 3 步進行網路問題排解" + +msgid "Connection failed! Please refer to the wiki page." +msgstr "" + +msgid "sending failed" +msgstr "" + +msgid "" +"Failed to send. Click Retry to attempt sending again. If retrying does not " +"work, please check the reason." +msgstr "" + +msgid "reconnect" +msgstr "" + +msgid "Air Pump" +msgstr "氣泵" + +msgid "Laser 10W" +msgstr "" + +msgid "Laser 40W" +msgstr "" + +msgid "Cutting Module" +msgstr "切割模組" + +msgid "Auto Fire Extinguishing System" +msgstr "" msgid "Model:" msgstr "型號：" -msgid "Serial:" -msgstr "序號：" - -msgid "Version:" -msgstr "版本：" - msgid "Update firmware" msgstr "更新韌體" msgid "Beta version" -msgstr "" - -msgid "Latest version" -msgstr "最新版本" +msgstr "Beta 版本" msgid "Updating" msgstr "更新中" -msgid "Updating failed" +msgid "Update failed" msgstr "更新失敗" -msgid "Updating successful" +msgid "Update successful" msgstr "更新成功" msgid "" @@ -8810,30 +10116,28 @@ msgid "" "continue. Do you want to update now? You can also update later from 'Upgrade " "firmware'." msgstr "" -"偵測到重要更新，需要升級後才可進行列印。你想現在就開始升級嗎？你也可以稍後點" -"擊‘升級韌體’完成升級。" +"檢測到重要更新，必須執行後才能繼續列印。您要現在更新嗎？或者稍後可在『升級韌" +"體』中完成更新。" -#, fuzzy msgid "" "The firmware version is abnormal. Repairing and updating are required before " "printing. Do you want to update now? You can also update later on printer or " "update next time starting Orca." msgstr "" -"目前韌體版本異常，需要進行修復升級，否則無法繼續列印。你想現在就開始升級嗎？" -"你也可以稍後在列印設備上升級，或者下一次啟動 Snapmaker Orca 再升級。" +"韌體版本異常，必須修復並更新後才能列印。您要現在更新嗎？也可以稍後在列印設備" +"上更新，或在下次啟動 Orca 時進行更新。" msgid "Extension Board" msgstr "擴展板" -msgid "Saving objects into the 3mf failed." -msgstr "將物件儲存到 3mf 失敗。" +msgid "Saving objects into the 3MF failed." +msgstr "將物件儲存到 3MF 失敗。" -#, fuzzy msgid "Only Windows 10 is supported." -msgstr "僅支援 Windows 10 作業系統。" +msgstr "僅支援 Windows 10。" msgid "Failed to initialize the WinRT library." -msgstr "無法初始化 WinRT 函式庫。。" +msgstr "無法初始化 WinRT 函式庫。" msgid "Exporting objects" msgstr "正在匯出物件" @@ -8847,27 +10151,26 @@ msgstr "透過 Windows 服務修復物件" msgid "Repair failed." msgstr "修復失敗。" -#, fuzzy msgid "Loading repaired objects" msgstr "正在載入修復的物件" -msgid "Exporting 3mf file failed" -msgstr "匯出 3mf 檔案失敗" +msgid "Exporting 3MF file failed" +msgstr "匯出 3MF 檔案失敗" -msgid "Import 3mf file failed" -msgstr "匯入 3mf 檔案失敗" +msgid "Import 3MF file failed" +msgstr "匯入 3MF 檔案失敗" -msgid "Repaired 3mf file does not contain any object" -msgstr "已修復的 3mf 檔案不包含任何物件" +msgid "Repaired 3MF file does not contain any object" +msgstr "已修復的 3MF 檔案不包含任何物件" -msgid "Repaired 3mf file contains more than one object" -msgstr "已修復的 3mf 檔案包含了不止一個物件" +msgid "Repaired 3MF file contains more than one object" +msgstr "已修復的 3MF 檔案包含了不止一個物件" -msgid "Repaired 3mf file does not contain any volume" -msgstr "修復的 3mf 檔案不包含任何零件" +msgid "Repaired 3MF file does not contain any volume" +msgstr "修復的 3MF 檔案不包含任何零件" -msgid "Repaired 3mf file contains more than one volume" -msgstr "已修復的 3mf 檔案包含多個零件" +msgid "Repaired 3MF file contains more than one volume" +msgstr "已修復的 3MF 檔案包含多個零件" msgid "Repair finished" msgstr "修復已完成" @@ -8875,19 +10178,18 @@ msgstr "修復已完成" msgid "Repair canceled" msgstr "修復被取消" -#, fuzzy, boost-format +#, boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "從 %1% 複製檔案到 %2% 失敗：%3%" -#, fuzzy msgid "Need to check the unsaved changes before configuration updates." msgstr "在設定更新之前需要檢查未儲存的設定變更。" msgid "Configuration package: " -msgstr "" +msgstr "設定檔：" msgid " updated to " -msgstr "" +msgstr "更新到 " msgid "Open G-code file:" msgstr "打開 G-code 檔案：" @@ -8911,11 +10213,15 @@ msgid "" msgstr "部分模型在這些高度可能過薄，或者模型存在缺陷" msgid "No object can be printed. Maybe too small" -msgstr "沒有可列印的物件。可能是因為尺寸過小。" +msgstr "沒有可列印的物件。可能是因為尺寸過小" -#, fuzzy msgid "" -"Failed to generate gcode for invalid custom G-code.\n" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "您的列印區域非常接近準備區域，請確認不會發生碰撞。" + +msgid "" +"Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "錯誤的自訂 G-code 導致 G-code 產生失敗。\n" @@ -8924,9 +10230,18 @@ msgstr "" msgid "Please check the custom G-code or use the default custom G-code." msgstr "請檢查自訂 G-code，或者使用預設的。" -#, fuzzy, boost-format +#, boost-format msgid "Generating G-code: layer %1%" -msgstr "正在產生 G-code：%1% 層" +msgstr "正在產生 G-code：第 %1% 層" + +msgid "Flush volumes matrix do not match to the correct size!" +msgstr "" + +msgid "Grouping error: " +msgstr "" + +msgid " can not be placed in the " +msgstr "" msgid "Inner wall" msgstr "內牆" @@ -8949,7 +10264,6 @@ msgstr "頂面" msgid "Bottom surface" msgstr "底面" -#, fuzzy msgid "Internal Bridge" msgstr "內部橋接" @@ -8966,13 +10280,13 @@ msgid "Multiple" msgstr "多個" #, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " -msgstr "計算 %1% 的線寬失敗。無法獲得 \"%2%\" 的值" +msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " +msgstr "計算 %1% 的線寬失敗。無法獲得「%2%」的值" msgid "" "Invalid spacing supplied to Flow::with_spacing(), check your layer height " "and extrusion width" -msgstr "提供給 Flow::with_spacing（） 的間距無效，請檢查層高和擠出寬度" +msgstr "提供給 Flow::with_spacing（）的間距無效，請檢查層高和擠出寬度" msgid "undefined error" msgstr "未定義的錯誤" @@ -9002,7 +10316,7 @@ msgid "invalid header or corrupted" msgstr "無效檔案頭或檔案已損壞" msgid "unsupported multidisk" -msgstr "不支援多磁碟儲存" +msgstr "不支援多硬碟儲存" msgid "decompression failed" msgstr "解壓縮失敗或存檔已損壞" @@ -9067,12 +10381,12 @@ msgstr "驗證失敗" msgid "write callback failed" msgstr "寫入回調失敗" -#, fuzzy, boost-format +#, boost-format msgid "" "%1% is too close to exclusion area, there may be collisions when printing." -msgstr "%1% 離不可列印區域太近，可能會發生碰撞。" +msgstr "%1% 離淨空區域太近，可能會發生碰撞。" -#, fuzzy, boost-format +#, boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "%1% 離其它物件太近，可能會發生碰撞。" @@ -9080,27 +10394,52 @@ msgstr "%1% 離其它物件太近，可能會發生碰撞。" msgid "%1% is too tall, and collisions will be caused." msgstr "%1% 太高，會發生碰撞。" -msgid " is too close to others, there may be collisions when printing." -msgstr "離其它物件太近，列印時可能會發生碰撞。" - msgid " is too close to exclusion area, there may be collisions when printing." -msgstr "離不可列印區域太近，列印時可能會發生碰撞。" +msgstr "離淨空區域太近，列印時可能會發生碰撞。" + +msgid "" +" is too close to clumping detection area, there may be collisions when " +"printing." +msgstr "" msgid "Prime Tower" -msgstr "擦拭塔" +msgstr "換料塔" msgid " is too close to others, and collisions may be caused.\n" msgstr "離其它物件太近，可能會發生碰撞。\n" msgid " is too close to exclusion area, and collisions will be caused.\n" -msgstr "離不可列印區域太近，會發生碰撞。\n" +msgstr "離淨空區域太近，會發生碰撞。\n" msgid "" -"Can not print multiple filaments which have large difference of temperature " -"together. Otherwise, the extruder and nozzle may be blocked or damaged " -"during printing" +" is too close to clumping detection area, and collisions will be caused.\n" +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing high-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage. If you still want to print, you can enable the option in " +"Preferences." +msgstr "" + +msgid "" +"Printing different-temp filaments together may cause nozzle clogging or " +"printer damage." +msgstr "" + +msgid "" +"Printing high-temp and mid-temp filaments together may cause nozzle clogging " +"or printer damage." +msgstr "" + +msgid "" +"Printing mid-temp and low-temp filaments together may cause nozzle clogging " +"or printer damage." msgstr "" -"不能將溫度差異過大的線材一起列印。否則擠出機和噴嘴在列印中可能被堵塞或損壞" msgid "No extrusions under current settings." msgstr "根據目前設定，不會進行任何列印。" @@ -9108,17 +10447,34 @@ msgstr "根據目前設定，不會進行任何列印。" msgid "" "Smooth mode of timelapse is not supported when \"by object\" sequence is " "enabled." -msgstr "平滑模式的縮時錄影不支援在逐件列印模式下使用。" +msgstr "逐件列印模式下不支援使用平滑模式的縮時錄影。" + +msgid "" +"Clumping detection is not supported when \"by object\" sequence is enabled." +msgstr "" + +msgid "" +"Prime tower is required for clumping detection; otherwise, there may be " +"flaws on the model." +msgstr "" msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." -msgstr "請選擇逐件列印以支援在花瓶模式下列印多個物件。" +msgstr "請選擇『逐件列印』以支援在螺旋花瓶模式下列印多個物件。" msgid "" "The spiral vase mode does not work when an object contains more than one " "materials." -msgstr "不支援在包含多個線材的列印中使用花瓶模式。" +msgstr "不支援在包含多個線材的列印中使用螺旋花瓶模式。" + +#, boost-format +msgid "" +"While the object %1% itself fits the build volume, it exceeds the maximum " +"build volume height because of material shrinkage compensation." +msgstr "" +"物件 %1% 本身雖然符合構建體積，但由於材料收縮補償，導致其超出了最大構建高度限" +"制。" #, boost-format msgid "The object %1% exceeds the maximum build volume height." @@ -9128,67 +10484,82 @@ msgstr "物件 %1% 超出了最大體積高度。" msgid "" "While the object %1% itself fits the build volume, its last layer exceeds " "the maximum build volume height." -msgstr "雖然物件 %1% 本身符合列印體積，但最後一層超出了最大列印體積高度。" +msgstr "物件 %1% 本身雖符合構建體積限制，但其最後一層超出了最大構建高度。" msgid "" "You might want to reduce the size of your model or change current print " "settings and retry." msgstr "您可能想要減小模型的尺寸或更改目前的列印設定並重試。" -#, fuzzy msgid "Variable layer height is not supported with Organic supports." msgstr "有機樹支撐不支持可變層高。" msgid "" -"Different nozzle diameters and different filament diameters is not allowed " -"when prime tower is enabled." +"Different nozzle diameters and different filament diameters may not work " +"well when the prime tower is enabled. It's very experimental, so please " +"proceed with caution." msgstr "" +"當啟用換料時，不同的噴嘴直徑和線材直徑可能無法正常配合。此功能屬於實驗性階" +"段，請小心使用。" msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." -msgstr "擦拭塔目前僅支援相對擠出機定址 (use_relative_e_distances=1)。" +msgstr "換料塔目前僅支援相對擠出機定址 (use_relative_e_distances=1)。" msgid "" -"Ooze prevention is currently not supported with the prime tower enabled." +"Ooze prevention is only supported with the wipe tower when " +"'single_extruder_multi_material' is off." msgstr "" +"『防止漏料』功能僅在 ‘single_extruder_multi_material’ 關閉時，才支援換料塔。" msgid "" "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" +"換料塔功能目前僅支援 Marlin、RepRap/Sprinter、RepRapFirmware 和 Repetier 的 " +"G-code 格式。" -#, fuzzy msgid "The prime tower is not supported in \"By object\" print." -msgstr "逐件列印模式下無法使用擦拭塔。" +msgstr "逐件列印模式下無法使用換料塔。" -#, fuzzy msgid "" "The prime tower is not supported when adaptive layer height is on. It " "requires that all objects have the same layer height." -msgstr "可變層高開啟時無法使用擦拭塔。它要求所有物件擁有相同的層高。" +msgstr "可變層高開啟時無法使用換料塔。它要求所有物件擁有相同的層高。" -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "擦拭塔要求”支撐間隙“為層高的整數倍數。" +msgid "" +"The prime tower requires \"support gap\" to be multiple of layer height." +msgstr "換料塔要求「支撐間隙」為層高的整數倍數" -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "擦拭塔要求各個物件擁有同樣的層高。" +msgid "The prime tower requires that all objects have the same layer heights." +msgstr "換料塔要求各個物件擁有同樣的層高" msgid "" "The prime tower requires that all objects are printed over the same number " -"of raft layers" -msgstr "擦拭塔要求各個物件使用同樣的筏層數量。" +"of raft layers." +msgstr "換料塔要求各個物件使用同樣的筏層數量" + +msgid "" +"The prime tower is only supported for multiple objects if they are printed " +"with the same support_top_z_distance." +msgstr "" +"只有當多個物件使用相同的支撐頂部 Z 距離 (support_top_z_distance) 列印時，才會" +"支援換料塔" msgid "" "The prime tower requires that all objects are sliced with the same layer " "heights." -msgstr "擦拭塔要求各個物件擁有同樣的層高。" +msgstr "換料塔要求各個物件擁有同樣的層高。" -#, fuzzy msgid "" "The prime tower is only supported if all objects have the same variable " -"layer height" -msgstr "各個物件的層高存在差異，無法啟用擦拭塔" +"layer height." +msgstr "各個物件的層高存在差異，無法啟用換料塔" + +msgid "" +"One or more object were assigned an extruder that the printer does not have." +msgstr "一個或多個物件被分配到的印表設備沒有擠出機" msgid "Too small line width" msgstr "線寬太小" @@ -9197,14 +10568,23 @@ msgid "Too large line width" msgstr "線寬太大" msgid "" -"The prime tower requires that support has the same layer height with object." -msgstr "擦拭塔要求支撐和物件採用同樣的層高。" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current filament (support_filament == 0 or " +"support_interface_filament == 0), all nozzles have to be of the same " +"diameter." +msgstr "" +"使用不同噴嘴直徑的多個擠出機進行列印。如果支撐要使用目前的耗材列印" +"（support_filament == 0 或 support_interface_filament == 0），則所有噴嘴必須" +"具有相同的直徑。" + +msgid "" +"The prime tower requires that support has the same layer height with object." +msgstr "換料塔要求支撐和物件採用同樣的層高。" -#, fuzzy msgid "" "Organic support tree tip diameter must not be smaller than support material " "extrusion width." -msgstr "有機樹狀支撐尖端直徑不得小於支撐材料擠出寬度。" +msgstr "有機樹支撐尖端直徑不得小於支撐材料擠出寬度。" msgid "" "Organic support branch diameter must not be smaller than 2x support material " @@ -9216,41 +10596,39 @@ msgid "" "diameter." msgstr "有機樹狀支撐枝直徑不得小於支撐樹梢直徑。" -#, fuzzy msgid "" "Support enforcers are used but support is not enabled. Please enable support." msgstr "使用支撐添加器但沒有打開支撐。請打開支撐。" -msgid "Layer height cannot exceed nozzle diameter" +msgid "Layer height cannot exceed nozzle diameter." msgstr "層高不能超過噴嘴直徑" -#, fuzzy msgid "" "Relative extruder addressing requires resetting the extruder position at " "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" -"相對擠出機尋址需要重置每層的擠出機位置，以防止浮點精度損失。 將 \"G92 E0\" 加" -"入到 layer_gcode。" +"相對擠出機尋址需要重置每層的擠出機位置，以防止浮點精度損失。 將「G92 E0」加入" +"到 layer_gcode。" msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -"在 before_layer_gcode 中發現 \"G92 E0\"，該程式碼與絕對擠出機尋址不相容。" +"在 before_layer_gcode 中發現「G92 E0」，該程式碼與絕對擠出機尋址不相容。" msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." -msgstr "在 layer_gcode 中發現 \"G92 E0\"，它與絕對擠出機尋址不相容。" +msgstr "在 layer_gcode 中發現「G92 E0」，它與絕對擠出機尋址不相容。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "列印板 %d：%s 不支援線材 %s" +msgstr "平台 %d：%s 不支援線材 %s" msgid "" "Setting the jerk speed too low could lead to artifacts on curved surfaces" -msgstr "" +msgstr "抖動速度設置過低可能會在曲面上產生缺陷" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/" @@ -9260,6 +10638,18 @@ msgid "" "You can adjust the maximum jerk setting in your printer's configuration to " "get higher speeds." msgstr "" +"抖動設定已超過印表機的最大急動值（machine_max_jerk_x/machine_max_jerk_y）。\n" +"Orca 將自動限制急動速度，以確保不超出列印設備的性能範圍。\n" +"如需更高速度，您可以在列印設備配置中調整最大急動值。" + +msgid "" +"Junction deviation setting exceeds the printer's maximum value " +"(machine_max_junction_deviation).\n" +"Orca will automatically cap the junction deviation to ensure it doesn't " +"surpass the printer's capabilities.\n" +"You can adjust the machine_max_junction_deviation value in your printer's " +"configuration to get higher limits." +msgstr "" msgid "" "The acceleration setting exceeds the printer's maximum acceleration " @@ -9269,6 +10659,10 @@ msgid "" "You can adjust the machine_max_acceleration_extruding value in your " "printer's configuration to get higher speeds." msgstr "" +"加速度設定已超過列印設備的最大加速度值 (machine_max_acceleration_travel)。\n" +"Orca 將自動限制加速度，以確保不超出列印設備的性能範圍。\n" +"如需更高速度，您可以在列印設備配置中調整 machine_max_acceleration_extruding " +"值。" msgid "" "The travel acceleration setting exceeds the printer's maximum travel " @@ -9278,10 +10672,23 @@ msgid "" "You can adjust the machine_max_acceleration_travel value in your printer's " "configuration to get higher speeds." msgstr "" +"移動加速度設定已超過列印設備的最大移動加速度值" +"（machine_max_acceleration_travel）。\n" +"Orca 將自動限制移動加速度，以確保不超出列印設備的性能範圍。\n" +"如需更高速度，您可以在列印設備配置中調整 machine_max_acceleration_travel 值。" + +msgid "" +"The precise wall option will be ignored for outer-inner or inner-outer-inner " +"wall sequences." +msgstr "" + +msgid "" +"Filament shrinkage will not be used because filament shrinkage for the used " +"filaments differs significantly." +msgstr "線材收縮補償將被停用，因為所使用的線材之間的收縮率差異過大。" -#, fuzzy msgid "Generating skirt & brim" -msgstr "正在產生 skirt 和 brim（裙邊）" +msgstr "正在產生 Skirt 和 Brim" msgid "Exporting G-code" msgstr "正在匯出 G-code" @@ -9289,30 +10696,32 @@ msgstr "正在匯出 G-code" msgid "Generating G-code" msgstr "正在產生 G-code" -#, fuzzy msgid "Failed processing of the filename_format template." msgstr "處理檔案名稱格式範本失敗。" +msgid "Printer technology" +msgstr "列印設備技術" + msgid "Printable area" msgstr "可列印區域" -msgid "Bed exclude area" -msgstr "不可列印區域" +msgid "Extruder printable area" +msgstr "" + +msgid "Bed exclude area" +msgstr "熱床淨空區域" -#, fuzzy msgid "" "Unprintable area in XY plane. For example, X1 Series printers use the front " "left corner to cut filament during filament change. The area is expressed as " "polygon by points in following format: \"XxY, XxY, ...\"" msgstr "" "XY 平面上的不可列印區域。例如，X1系列設備在換料過程中，會使用左前角區域來切斷" -"線材。這個多邊形區域由以下格式的點表示：“XxY，XxY，…”" +"線材。這個多邊形區域由以下格式的點表示：「XxY，XxY，…」" -#, fuzzy msgid "Bed custom texture" msgstr "自訂列印板紋理" -#, fuzzy msgid "Bed custom model" msgstr "自訂列印板模型" @@ -9320,8 +10729,8 @@ msgid "Elephant foot compensation" msgstr "象腳補償" msgid "" -"Shrink the initial layer on build plate to compensate for elephant foot " -"effect" +"Shrinks the initial layer on build plate to compensate for elephant foot " +"effect." msgstr "將首層收縮用於補償象腳效應" msgid "Elephant foot compensation layers" @@ -9341,36 +10750,41 @@ msgstr "層" msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " -"more printing time" -msgstr "每一層的切片高度。越小的層高意味著更高的精度和更長的列印時間。" +"more printing time." +msgstr "每一層的切片高度。越小的層高意味著更高的精度和更長的列印時間" msgid "Printable height" msgstr "可列印高度" -#, fuzzy -msgid "Maximum printable height which is limited by mechanism of printer" -msgstr "最大可列印高度受列印設備硬體限制" +msgid "Maximum printable height which is limited by mechanism of printer." +msgstr "受列印設備硬體限制的最大可列印高度" + +msgid "Extruder printable height" +msgstr "" + +msgid "" +"Maximum printable height of this extruder which is limited by mechanism of " +"printer." +msgstr "" msgid "Preferred orientation" -msgstr "" +msgstr "首選方向" -msgid "Automatically orient stls on the Z-axis upon initial import" -msgstr "" +msgid "Automatically orient STL files on the Z axis upon initial import." +msgstr "匯入 STL 時自動對齊 Z 軸" -#, fuzzy msgid "Printer preset names" msgstr "列印設備預設名稱" msgid "Use 3rd-party print host" -msgstr "" +msgstr "啟用第三方列印主機" -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" -msgstr "" +msgid "Allow controlling BambuLab's printer through 3rd party print hosts." +msgstr "允許使用第三方列印主機控制 BambuLab 列印機" msgid "Hostname, IP or URL" msgstr "主機名，IP 或者 URL" -#, fuzzy msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the hostname, IP address or URL of the printer host instance. Print " @@ -9380,20 +10794,18 @@ msgid "" msgstr "" "Snapmaker Orca 可以將 G-code 檔案上傳到列印設備。此欄位應包含列印設備的主機名、" "IP 位址或 URL。啟用基本身份驗證的列印設備可以透過將使用者名稱和密碼放入以下格" -"式的URL中來訪問：https://username:password@your-octopi-address/" +"式的URL中來存取：https://username:password@your-octopi-address/" msgid "Device UI" msgstr "設備使用者界面" -#, fuzzy msgid "" -"Specify the URL of your device user interface if it's not same as print_host" -msgstr "如果列印設備的使用者界面 URL 不同，請在此指定。" +"Specify the URL of your device user interface if it's not same as print_host." +msgstr "如果列印設備的使用者界面 URL 不同，請輸入在此" msgid "API Key / Password" -msgstr "API Key / 密碼" +msgstr "API 金鑰 / 密碼" -#, fuzzy msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field should " "contain the API Key or the password required for authentication." @@ -9401,14 +10813,12 @@ msgstr "" "Snapmaker Orca 可以將 G-code 檔案上傳到列印設備。此欄位應包含用於身份驗證的 API " "金鑰或密碼。" -#, fuzzy -msgid "Name of the printer" +msgid "Name of the printer." msgstr "列印設備名稱" msgid "HTTPS CA File" msgstr "HTTPS CA憑證 檔" -#, fuzzy msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " @@ -9423,21 +10833,18 @@ msgstr "使用者名稱" msgid "Password" msgstr "密碼" -#, fuzzy msgid "Ignore HTTPS certificate revocation checks" -msgstr "忽略 HTTPS憑證 吊銷檢查" +msgstr "忽略 HTTPS 憑證吊銷檢查" -#, fuzzy msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" -"在缺少或離線的情況下忽略 HTTPS憑證 吊銷檢查。如果連接失敗，可以啟用此選項來處" +"在缺少或離線的情況下忽略 HTTPS 憑證吊銷檢查。如果連接失敗，可以啟用此選項來處" "理自簽名憑證。" -#, fuzzy -msgid "Names of presets related to the physical printer" +msgid "Names of presets related to the physical printer." msgstr "與實體列印設備相關的預設名稱" msgid "Authorization Type" @@ -9447,26 +10854,26 @@ msgid "API key" msgstr "API 金鑰" msgid "HTTP digest" -msgstr "HTTP摘要" +msgstr "HTTP 摘要" -msgid "Avoid crossing wall" +msgid "Avoid crossing walls" msgstr "避免跨越外牆" -msgid "Detour and avoid to travel across wall which may cause blob on surface" +msgid "" +"Detour to avoid traveling across walls, which may cause blobs on the surface." msgstr "空駛時繞過外牆以避免在模型外觀表面產生斑點" -msgid "Avoid crossing wall - Max detour length" +msgid "Avoid crossing walls - Max detour length" msgstr "避免跨越外牆-最大繞行長度" -#, fuzzy msgid "" "Maximum detour distance for avoiding crossing wall. Don't detour if the " -"detour distance is large than this value. Detour length could be specified " +"detour distance is larger than this value. Detour length could be specified " "either as an absolute value or as percentage (for example 50%) of a direct " -"travel path. Zero to disable" +"travel path. Zero to disable." msgstr "" -"避免跨越外牆時的最大繞行距離。如果繞行距離大於該數值，則空駛不繞行。繞行距離" -"可指定為絕對值或直接空駛路徑的百分比（例如 50%）。0 表示禁用" +"避開穿越牆體時的最大繞行距離。若繞行距離超過此設定值，則不進行繞行。繞行距離" +"可設為絕對值，或直接移動路徑的百分比（如 50%）。設為 0 以停用繞行功能" msgid "mm or %" msgstr "mm 或 %" @@ -9474,37 +10881,35 @@ msgstr "mm 或 %" msgid "Other layers" msgstr "其它層" -#, fuzzy msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Cool Plate" -msgstr "除首層外的床溫。0 值表示這個線材不支援低溫列印板" - -msgid "°C" -msgstr "°C" - -msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured Cool Plate" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate SuperTack." msgstr "" -#, fuzzy msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Engineering Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援工程高溫列印板" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Cool Plate." +msgstr "首層之外各層的熱床溫度。值為 0 表示該線材不適用於低溫列印板" -#, fuzzy msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the High Temp Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援高溫列印板" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured Cool Plate." +msgstr "首層之外各層的熱床溫度。值為 0 表示該線材不適用於低溫紋理列印板" -#, fuzzy msgid "" -"Bed temperature for layers except the initial one. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援金屬紋理 PEI 列印板" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Engineering Plate." +msgstr "首層之外各層的熱床溫度。值為 0 表示該線材不適用於工程列印板" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the High Temp Plate." +msgstr "首層之外各層的熱床溫度。值為 0 表示該線材不適用於高溫列印板" + +msgid "" +"Bed temperature for layers except the initial one. A value of 0 means the " +"filament does not support printing on the Textured PEI Plate." +msgstr "首層之外各層的熱床溫度。值為 0 表示該線材不適用於紋理 PEI 列印板" msgid "Initial layer" msgstr "首層" @@ -9512,65 +10917,65 @@ msgstr "首層" msgid "Initial layer bed temperature" msgstr "首層床溫" -#, fuzzy msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Cool Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援低溫列印板" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate SuperTack." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於低溫增穩列印板" msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured Cool Plate" -msgstr "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Cool Plate." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於低溫列印板" -#, fuzzy msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Engineering Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援工程高溫列印板" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured Cool Plate." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於低溫紋理列印板" -#, fuzzy msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the High Temp Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援高溫列印板" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Engineering Plate." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於工程列印板" -#, fuzzy msgid "" -"Bed temperature of the initial layer. Value 0 means the filament does not " -"support to print on the Textured PEI Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援金屬紋理 PEI 列印板" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the High Temp Plate." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於高溫列印板" -#, fuzzy -msgid "Bed types supported by the printer" +msgid "" +"Bed temperature of the initial layer. A value of 0 means the filament does " +"not support printing on the Textured PEI Plate." +msgstr "首層的列印床溫度。值為 0 表示該線材不適用於紋理 PEI 列印板" + +msgid "Bed types supported by the printer." msgstr "列印設備所支援的列印板類型" msgid "Smooth Cool Plate" -msgstr "" - -#, fuzzy -msgid "Engineering Plate" -msgstr "工程高溫列印板" +msgstr "低溫平滑列印板" msgid "Smooth High Temp Plate" +msgstr "高溫平滑列印板" + +msgid "Default bed type" msgstr "" -msgid "Textured Cool Plate" +msgid "" +"Default bed type for the printer (supports both numeric and string format)." msgstr "" msgid "First layer print sequence" msgstr "首層列印順序" msgid "Other layers print sequence" -msgstr "" +msgstr "其他層的列印順序" msgid "The number of other layers print sequence" -msgstr "" +msgstr "其他層列印順序的次數" msgid "Other layers filament sequence" -msgstr "" +msgstr "其他層線材的列印順序" -msgid "This G-code is inserted at every layer change before lifting z" +msgid "This G-code is inserted at every layer change before the Z lift." msgstr "在每次換層抬升z高度之前插入這段 G-code" msgid "Bottom shell layers" @@ -9579,7 +10984,7 @@ msgstr "底部殼體層數" msgid "" "This is the number of solid layers of bottom shell, including the bottom " "surface layer. When the thickness calculated by this value is thinner than " -"bottom shell thickness, the bottom shell layers will be increased" +"bottom shell thickness, the bottom shell layers will be increased." msgstr "" "底部殼體實心層層數，包括底面。當由該層數計算的厚度小於底部殼體厚度，切片時會" "增加底部殼體的層數" @@ -9587,151 +10992,367 @@ msgstr "" msgid "Bottom shell thickness" msgstr "底部殼體厚度" -#, fuzzy msgid "" "The number of bottom solid layers is increased when slicing if the thickness " "calculated by bottom shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of bottom shell is absolutely determained by " -"bottom shell layers" +"is disabled and thickness of bottom shell is absolutely determined by bottom " +"shell layers." msgstr "" "如果由底部殼體層數算出的厚度小於這個數值，那麼切片時將自動增加底部殼體層數。" "這能夠避免當層高很小時，底部殼體過薄。0 表示關閉這個設定，同時底部殼體的厚度" "完全由底部殼體層數決定" msgid "Apply gap fill" -msgstr "" +msgstr "套用間隙填充" msgid "" -"Enables gap fill for the selected surfaces. The minimum gap length that will " -"be filled can be controlled from the filter out tiny gaps option below.\n" +"Enables gap fill for the selected solid surfaces. The minimum gap length " +"that will be filled can be controlled from the filter out tiny gaps option " +"below.\n" "\n" "Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" +"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces " +"for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces " -"only\n" -"3. Nowhere: Disables gap fill\n" +"only, balancing print speed, reducing potential over extrusion in the solid " +"infill and making sure the top and bottom surfaces have no pinhole gaps\n" +"3. Nowhere: Disables gap fill for all solid infill areas\n" +"\n" +"Note that if using the classic perimeter generator, gap fill may also be " +"generated between perimeters, if a full width line cannot fit between them. " +"That perimeter gap fill is not controlled by this setting.\n" +"\n" +"If you would like all gap fill, including the classic perimeter generated " +"one, removed, set the filter out tiny gaps value to a large number, like " +"999999.\n" +"\n" +"However this is not advised, as gap fill between perimeters is contributing " +"to the model's strength. For models where excessive gap fill is generated " +"between perimeters, a better option would be to switch to the arachne wall " +"generator and use this option to control whether the cosmetic top and bottom " +"surface gap fill is generated." msgstr "" +"為選定的實心表面啟用間隙填充。您可以使用下方的『過濾微小間隙』選項來控制填充" +"的最小間隙長度。\n" +"\n" +"選項：\n" +"1. 所有區域：將間隙填充套用於頂部、底部和內部實心表面，以提升結構強度。\n" +"2. 僅頂部和底部：僅在頂部和底部表面進行間隙填充，平衡列印速度，減少實心填充中" +"的過度擠出，同時確保頂部和底部表面無針孔間隙。\n" +"3. 不填充：停用所有實心填充區域的間隙填充。\n" +"\n" +"請注意，若使用『經典』的牆產生器，當外牆之間無法容納完整寬度的線條時，間隙填" +"充仍可能產生。這類外牆間隙填充不受此設置控制。\n" +"如果希望移除所有間隙填充，包括『經典』的牆產生器間隙填充，可將『過濾微小間" +"隙』設置為較大的數字（如 999999）。\n" +"然而，不建議這麼做，因為外牆間的間隙填充能增強模型強度。若模型因外牆間隙填充" +"過多而受影響，更好的解決方案是切換到『Arachne』牆產生器，並利用此選項控制是否" +"產生頂部和底部表面的美觀間隙填充" msgid "Everywhere" msgstr "全部" msgid "Top and bottom surfaces" -msgstr "" +msgstr "頂部與底部" msgid "Nowhere" -msgstr "" +msgstr "無" -#, fuzzy -msgid "Force cooling for overhang and bridge" -msgstr "懸空/橋接強制冷卻" +msgid "Force cooling for overhangs and bridges" +msgstr "強制冷卻懸垂與橋接結構" -#, fuzzy msgid "" -"Enable this option to optimize part cooling fan speed for overhang and " -"bridge to get better cooling" -msgstr "勾選這個選項將自動最佳化橋接和懸空的風扇轉速以獲得更好的冷卻" - -#, fuzzy -msgid "Fan speed for overhang" -msgstr "懸空風扇速度" - -#, fuzzy -msgid "" -"Force part cooling fan to be this speed when printing bridge or overhang " -"wall which has large overhang degree. Forcing cooling for overhang and " -"bridge can get better quality for these part" +"Enable this option to allow adjustment of the part cooling fan speed for " +"specifically for overhangs, internal and external bridges. Setting the fan " +"speed specifically for these features can improve overall print quality and " +"reduce warping." msgstr "" -"當列印橋接和超過臨界值設定的懸空時，強制部件冷卻風扇為設定的速度數值。強制冷" -"卻能夠使懸空和橋接獲得更好的列印品質" +"啟用此選項後，可調整零件冷卻風扇的速度，專門針對懸垂結構、內部和外部橋接區" +"域。適當調整風扇速度能提升列印品質並減少變形問題。" -msgid "Cooling overhang threshold" -msgstr "冷卻懸空臨界值" +msgid "Overhangs and external bridges fan speed" +msgstr "懸垂與外部橋接區域的冷卻風扇速度" -#, c-format msgid "" -"Force cooling fan to be specific speed when overhang degree of printed part " -"exceeds this value. Expressed as percentage which indicides how much width " -"of the line without support from lower layer. 0% means forcing cooling for " -"all outer wall no matter how much overhang degree" +"Use this part cooling fan speed when printing bridges or overhang walls with " +"an overhang threshold that exceeds the value set in the 'Overhangs cooling " +"threshold' parameter above. Increasing the cooling specifically for " +"overhangs and bridges can improve the overall print quality of these " +"features.\n" +"\n" +"Please note, this fan speed is clamped on the lower end by the minimum fan " +"speed threshold set above. It is also adjusted upwards up to the maximum fan " +"speed threshold when the minimum layer time threshold is not met." msgstr "" +"當列印橋接結構或懸垂牆，且其懸垂角度超過「懸垂冷卻閾值」所設定的標準時，將適" +"用此零件冷卻風扇轉速。針對懸垂與橋接部分提高冷卻強度，有助於提升列印品質並減" +"少變形。\n" +"\n" +"請注意，此風扇轉速的最低值受限於「最小風扇轉速」設定。此外，當層列印時間未達" +"「最小層列印時間」閾值時，風扇轉速將自動增加，最高可達「最大風扇轉速」設定" +"值。" -#, fuzzy -msgid "Bridge infill direction" -msgstr "橋接填充角度" +msgid "Overhang cooling activation threshold" +msgstr "懸垂冷卻觸發閾值" -#, fuzzy +#, no-c-format, no-boost-format +msgid "" +"When the overhang exceeds this specified threshold, force the cooling fan to " +"run at the 'Overhang Fan Speed' set below. This threshold is expressed as a " +"percentage, indicating the portion of each line's width that is unsupported " +"by the layer beneath it. Setting this value to 0% forces the cooling fan to " +"run for all outer walls, regardless of the overhang degree." +msgstr "" +"當懸垂部分超過此指定的閾值時，強制冷卻風扇以「懸垂風扇速度」設定運行。此閾值" +"以百分比表示，表示每條線寬中未被下層支撐的部分。將此值設為 0% 時，無論懸垂角" +"度如何，都會強制冷卻風扇在所有外牆上運行" + +msgid "External bridge infill direction" +msgstr "外部橋接結構的填充方向" + +#, no-c-format, no-boost-format msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for " -"external bridges. Use 180°for zero angle." +"external bridges. Use 180° for zero angle." msgstr "" "橋接角度覆蓋。如果為零，該角度將自動計算。否則外部的橋接將用提供的值。180° 表" "示 0 度。" -#, fuzzy -msgid "Bridge density" -msgstr "橋接密度" +msgid "Internal bridge infill direction" +msgstr "內部橋接結構的填充方向" -#, fuzzy -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "外部橋接的密度。 100% 意味著堅固的橋樑。 預設值為 100%。" +msgid "" +"Internal bridging angle override. If left to zero, the bridging angle will " +"be calculated automatically. Otherwise the provided angle will be used for " +"internal bridges. Use 180° for zero angle.\n" +"\n" +"It is recommended to leave it at 0 unless there is a specific model need not " +"to." +msgstr "" +"內部橋接角度覆蓋設定。若設定為 0，系統將自動計算橋接角度；若輸入特定角度，則" +"內部橋接將依此角度列印。設定 180° 可視為零角度。\n" +"\n" +"建議將此值保持為 0，除非模型有特殊需求需手動調整。" + +msgid "External bridge density" +msgstr "外部橋接密度" + +msgid "" +"Controls the density (spacing) of external bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density external bridges can help improve reliability as there is more " +"space for air to circulate around the extruded bridge, improving its cooling " +"speed." +msgstr "" +"調整外部橋接線的密度（間距）。100% 代表實心橋接，預設值為 100%。\n" +"降低外部橋接的密度可提升列印穩定性，因為較大的間距讓空氣更容易流通，加速冷卻" +"效果。" + +msgid "Internal bridge density" +msgstr "內部橋接密度" + +msgid "" +"Controls the density (spacing) of internal bridge lines. 100% means solid " +"bridge. Default is 100%.\n" +"\n" +"Lower density internal bridges can help reduce top surface pillowing and " +"improve internal bridge reliability as there is more space for air to " +"circulate around the extruded bridge, improving its cooling speed.\n" +"\n" +"This option works particularly well when combined with the second internal " +"bridge over infill option, further improving internal bridging structure " +"before solid infill is extruded." +msgstr "" +"調整內部橋接線的密度（間距）。100% 代表實心橋接，預設值為 100%。\n" +"\n" +"降低內部橋接的密度有助於減少頂部表面的鼓起問題，並提升內部橋接的穩定性，因為" +"較大的間距讓空氣更容易流通，加速冷卻效果。\n" +"\n" +"此選項特別適用於「內部橋接覆蓋填充」功能，可進一步改善內部橋接結構，在擠出實" +"心填充前提供更穩固的支撐。" msgid "Bridge flow ratio" msgstr "橋接流量" -#, fuzzy msgid "" -"Decrease this value slightly(for example 0.9) to reduce the amount of " -"material for bridge, to improve sag" -msgstr "稍微減小這個數值（比如 0.9）可以減小橋接的線材量，來改善下垂。" +"Decrease this value slightly (for example 0.9) to reduce the amount of " +"material for bridge, to improve sag.\n" +"\n" +"The actual bridge flow used is calculated by multiplying this value with the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"略微降低此值（例如設為 0.9）可減少橋接所需的材料量，從而改善橋接下垂的問" +"題。\n" +"\n" +"實際的橋接流量是通過此值乘以線材流量比例計算的，並且若已設置物件流量比例，該" +"比例也將被考慮在內。" msgid "Internal bridge flow ratio" -msgstr "" +msgstr "內部橋接流量" msgid "" "This value governs the thickness of the internal bridge layer. This is the " "first layer over sparse infill. Decrease this value slightly (for example " -"0.9) to improve surface quality over sparse infill." +"0.9) to improve surface quality over sparse infill.\n" +"\n" +"The actual internal bridge flow used is calculated by multiplying this value " +"with the bridge flow ratio, the filament flow ratio, and if set, the " +"object's flow ratio." msgstr "" +"此設定值決定內部橋接層的厚度，該層是稀疏填充上的第一層。稍微降低此值（例如設" +"為 0.9）可改善稀疏填充表面的列印品質。\n" +"\n" +"實際的內部橋接流量是由此值乘以橋接流量比例、線材流量比例計算得出，若設置了物" +"件流量比例，比例也會被納入計算。" msgid "Top surface flow ratio" msgstr "頂部表面流量比例" -#, fuzzy msgid "" "This factor affects the amount of material for top solid infill. You can " -"decrease it slightly to have smooth surface finish" -msgstr "稍微減小這個數值（比如 0.97）可以來改善頂面的光滑程度。" +"decrease it slightly to have smooth surface finish.\n" +"\n" +"The actual top surface flow used is calculated by multiplying this value " +"with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"此設定值會影響頂部實心填充的材料用量。稍微降低此值可使表面更加平滑。\n" +"\n" +"實際的頂部表面流量是此值乘以線材流量比例計算得出，若已設置物件流量比例，該比" +"例也會被納入計算。" msgid "Bottom surface flow ratio" msgstr "底部表面流量比例" -#, fuzzy -msgid "This factor affects the amount of material for bottom solid infill" -msgstr "首層流量調整係數，預設為 1.0" +msgid "" +"This factor affects the amount of material for bottom solid infill.\n" +"\n" +"The actual bottom solid infill flow used is calculated by multiplying this " +"value with the filament flow ratio, and if set, the object's flow ratio." +msgstr "" +"此設定值會影響底部實心填充的材料用量。\n" +"\n" +"實際的底部實心填充流量是此值乘以線材流量比例計算得出，若已設置物件流量比例，" +"該比例也會被納入計算。" + +msgid "Set other flow ratios" +msgstr "" + +msgid "Change flow ratios for other extrusion path types." +msgstr "" + +msgid "First layer flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material on the first layer for the " +"extrusion path roles listed in this section.\n" +"\n" +"For the first layer, the actual flow ratio for each path role (does not " +"affect brims and skirts) will be multiplied by this value." +msgstr "" + +msgid "Outer wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for outer walls.\n" +"\n" +"The actual outer wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Inner wall flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for inner walls.\n" +"\n" +"The actual inner wall flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Overhang flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for overhangs.\n" +"\n" +"The actual overhang flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Sparse infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for sparse infill.\n" +"\n" +"The actual sparse infill flow used is calculated by multiplying this value " +"by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Internal solid infill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for internal solid infill.\n" +"\n" +"The actual internal solid infill flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Gap fill flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for filling the gaps.\n" +"\n" +"The actual gap filling flow used is calculated by multiplying this value by " +"the filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for support.\n" +"\n" +"The actual support flow used is calculated by multiplying this value by the " +"filament flow ratio, and if set, the object's flow ratio." +msgstr "" + +msgid "Support interface flow ratio" +msgstr "" + +msgid "" +"This factor affects the amount of material for the support interface.\n" +"\n" +"The actual support interface flow used is calculated by multiplying this " +"value by the filament flow ratio, and if set, the object's flow ratio." +msgstr "" -#, fuzzy msgid "Precise wall" msgstr "精準外牆尺寸" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured " -"to Inner-Outer" +"layer consistency. NOTE: This option will be ignored for outer-inner or " +"inner-outer-inner wall sequences." msgstr "" msgid "Only one wall on top surfaces" msgstr "頂面單層牆" msgid "" -"Use only one wall on flat top surface, to give more space to the top infill " -"pattern" +"Use only one wall on flat top surfaces, to give more space to the top infill " +"pattern." msgstr "頂面只使用單層牆，從而更多的空間能夠使用頂部填充圖案" msgid "One wall threshold" -msgstr "單層牆臨界值" +msgstr "單層牆閾值" #, no-c-format, no-boost-format msgid "" @@ -9744,50 +11365,52 @@ msgid "" "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" -"如果頂面需要列印，但是它的一部分被其它層覆蓋，那麼當它的寬度小於這個值時，它" -"不會被認為是頂層。這個設定可以用於避免在狹窄頂面上觸發“頂面單層牆”。這個值可" -"以是 mm 或線寬的 %。\n" -"警告：如果啟用該選項，可能會在下一層上產生一些薄的特徵，比如字母。將此設定設" -"為 0 可以消除這些偽影。" +"當需要列印頂部表面，但該表面部分被另一層覆蓋時，如果其寬度小於此設定值，則不" +"會被視為頂層。這有助於避免在需要外牆覆蓋的表面上，產生「單層牆」的情況發生。" +"此值可以設為毫米或外周擠出寬度的百分比。\n" +"警告：啟用此設定可能會在下一層具有細小特徵（如字母）時產生瑕疵。將此值設為 0 " +"可移除這些瑕疵。" msgid "Only one wall on first layer" msgstr "首層僅單層牆" msgid "" "Use only one wall on first layer, to give more space to the bottom infill " -"pattern" +"pattern." msgstr "首層只使用單層牆，從而更多的空間能夠使用底部填充圖案" msgid "Extra perimeters on overhangs" -msgstr "懸空上的額外周長" +msgstr "懸挑上的額外周長" msgid "" "Create additional perimeter paths over steep overhangs and areas where " -"bridges cannot be anchored. " +"bridges cannot be anchored." msgstr "在陡峭的懸空和無法固定橋接的區域中增加額外的周長路徑。" -#, fuzzy -msgid "Reverse on odd" -msgstr "反轉奇數層懸空方向" +msgid "Reverse on even" +msgstr "偶數層反向" -#, fuzzy msgid "Overhang reversal" -msgstr "懸空反轉" +msgstr "懸空反向" msgid "" "Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " +"direction on even layers. This alternating pattern can drastically improve " "steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of " "stresses in the part walls." msgstr "" +"在偶數層上，對於有懸空部分的外圍輪廓，採用反向擠出。這種交替模式可以大幅改善" +"陡峭的懸挑。\n" +"\n" +"此設定還有助於減少因零件牆壁應力降低而導致的變形。" msgid "Reverse only internal perimeters" -msgstr "" +msgstr "僅在內圍輪廓反向" msgid "" -"Apply the reverse perimeters logic only on internal perimeters. \n" +"Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in " "alternating directions. This should reduce part warping while also " @@ -9796,27 +11419,39 @@ msgid "" "Silk PLA. It can also help reduce warping on floating regions over " "supports.\n" "\n" -"For this setting to be the most effective, it is recomended to set the " +"For this setting to be the most effective, it is recommended to set the " "Reverse Threshold to 0 so that all internal walls print in alternating " -"directions on odd layers irrespective of their overhang degree." +"directions on even layers irrespective of their overhang degree." msgstr "" +"僅在內圍輪廓套用反向邏輯。\n" +"\n" +"此設定可顯著減少零件應力，因為應力會以交替方向分佈。這有助於減少零件翹曲，同" +"時保持外部牆面的品質。此功能對於易翹曲的材料（例如 ABS/ASA），以及彈性線材" +"（例如 TPU 和絲光 PLA）特別有用。它還可以幫助減少支撐上懸空區域的翹曲。\n" +"\n" +"為使此設定達到最佳效果，建議將反向閾值設為 0，以確保所有內圍牆體在偶數層以交" +"替方向列印，而不受懸垂角度的影響。" msgid "Bridge counterbore holes" -msgstr "" +msgstr "橋接沉孔" msgid "" "This option creates bridges for counterbore holes, allowing them to be " "printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." +"1. None: No bridge is created\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" +"此選項為沉孔建立橋接，允許其在無支撐的情況下列印。可用模式包括：\n" +"1. 無：不建立任何橋接。\n" +"2. 部分橋接：僅對未支撐區域的一部分進行橋接。\n" +"3. 犧牲層：建立一層完整的犧牲橋接層。" msgid "Partially bridged" -msgstr "" +msgstr "部分橋接" msgid "Sacrificial layer" -msgstr "" +msgstr "犧牲層" msgid "Reverse threshold" msgstr "反轉臨界值" @@ -9828,139 +11463,162 @@ msgstr "懸空反轉臨界值" msgid "" "Number of mm the overhang need to be for the reversal to be considered " "useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every odd layers regardless." +"Value 0 enables reversal on every even layers regardless.\n" +"When Detect overhang wall is not enabled, this option is ignored and " +"reversal happens on every even layers regardless." msgstr "" -"判定懸空反轉需要的值（mm），可以是線寬的百分比。\n" -" 0 值則會在每個奇數層上啟用反向。" +"懸空需要達到的 mm，才能使反轉被認為是有用的。該值可以是外牆寬度的百分比。\n" +"設為 0 時，反轉將在所有偶數層上無條件啟用。\n" +"如果未啟用『檢測懸空外牆』，此選項將被忽略，並且反轉會無條件發生在所有偶數層" +"上。" -msgid "Classic mode" -msgstr "經典模式" - -msgid "Enable this option to use classic mode" -msgstr "開啟此選項以使用經典模式" - -#, fuzzy msgid "Slow down for overhang" -msgstr "懸空降速" +msgstr "懸空處降速" -msgid "Enable this option to slow printing down for different overhang degree" -msgstr "打開這個選項將降低不同懸垂程度的走線的列印速度" +msgid "Enable this option to slow printing down for different overhang degree." +msgstr "打開這個選項將降低不同懸空程度的走線的列印速度" -#, fuzzy msgid "Slow down for curled perimeters" -msgstr "翹邊降速" +msgstr "翹邊處降速" +#, no-c-format, no-boost-format msgid "" -"Enable this option to slow printing down in areas where potential curled " -"perimeters may exist" -msgstr "啟用此選項降低可能存在潛在翹邊區域的列印速度" +"Enable this option to slow down printing in areas where perimeters may have " +"curled upwards. For example, additional slowdown will be applied when " +"printing overhangs on sharp corners like the front of the Benchy hull, " +"reducing curling which compounds over multiple layers.\n" +"\n" +"It is generally recommended to have this option switched on unless your " +"printer cooling is powerful enough or the print speed slow enough that " +"perimeter curling does not happen. If printing with a high external " +"perimeter speed, this parameter may introduce slight artifacts when slowing " +"down due to the large variance in print speeds. If you notice artifacts, " +"ensure your pressure advance is tuned correctly.\n" +"\n" +"Note: When this option is enabled, overhang perimeters are treated like " +"overhangs, meaning the overhang speed is applied even if the overhanging " +"perimeter is part of a bridge. For example, when the perimeters are 100% " +"overhanging, with no wall supporting them from underneath, the 100% overhang " +"speed will be applied." +msgstr "" +"啟用此選項以在可能發生外牆翹起的區域減慢列印速度。例如，在列印懸空的尖銳角落" +"（如 Benchy 船體前部）時，會額外減速，從而減少多層累積後的翹起。\n" +"\n" +"一般建議啟用此選項，除非您的列印設備冷卻性能足夠強大，或者列印速度足夠慢，避" +"免發生外部周邊翹起。如果使用高外部周邊列印速度，此參數可能因列印速度差異過大" +"而導致輕微瑕疵。如果您注意到瑕疵，請確保壓力補償已正確調整。\n" +"\n" +"注意：啟用此選項時，懸空外周邊會被視為懸空結構，即使該懸空外部周邊是橋接的一" +"部分，也會套用懸空速度。例如，當外牆 100% 懸空且下方無牆支撐時，將套用 100% " +"懸空速度。" msgid "mm/s or %" msgstr "mm/s 或 %" -#, fuzzy -msgid "External" -msgstr "外部" +msgid "" +"Speed of the externally visible bridge extrusions.\n" +"\n" +"In addition, if Slow down for curled perimeters is disabled or Classic " +"overhang mode is enabled, it will be the print speed of overhang walls that " +"are supported by less than 13%, whether they are part of a bridge or an " +"overhang." +msgstr "" +"外部可見橋接擠出的列印速度\n" +"\n" +"如果停用了『翹邊處降速』或啟用了『經典懸空模式』，則對支撐率低於 13% 的懸空牆" +"（無論是橋接的一部分還是懸空結構）將使用該列印速度。" -msgid "Speed of bridge and completely overhang wall" -msgstr "橋接和完全懸空的外牆的列印速度" - -msgid "mm/s" -msgstr "mm/s" - -#, fuzzy msgid "Internal" msgstr "內部" msgid "" -"Speed of internal bridge. If the value is expressed as a percentage, it will " -"be calculated based on the bridge_speed. Default value is 150%." +"Speed of internal bridges. If the value is expressed as a percentage, it " +"will be calculated based on the bridge_speed. Default value is 150%." msgstr "" -"內部橋接速度。 如果該值以百分比表示，則會根據 橋接速度 進行計算。 預設值為 " -"150%" +"內部橋接速度。如果該值以百分比表示，將基於 bridge_speed 進行計算。預設值為 " +"150%。" -#, fuzzy msgid "Brim width" -msgstr "Brim（裙邊） 寬度" +msgstr "Brim 寬度" -#, fuzzy -msgid "Distance from model to the outermost brim line" -msgstr "從模型到最外圈 brim（裙邊） 走線的距離" +msgid "Distance from model to the outermost brim line." +msgstr "從模型到 Brim 最外圈的距離" -#, fuzzy msgid "Brim type" -msgstr "Brim（裙邊） 類型" +msgstr "Brim 類型" -#, fuzzy msgid "" "This controls the generation of the brim at outer and/or inner side of " -"models. Auto means the brim width is analysed and calculated automatically." +"models. Auto means the brim width is analyzed and calculated automatically." msgstr "" -"該參數控制在模型的外側和/或內側產生 brim（裙邊）。自動是指自動分析和計算邊框" -"的寬度。" +"該參數控制在模型的外側和/或內側產生 Brim 。自動是指自動分析和計算邊框的寬度。" -#, fuzzy msgid "Brim-object gap" -msgstr "Brim（裙邊） 與模型的間隙" +msgstr "Brim 與模型的間隙" -#, fuzzy msgid "" "A gap between innermost brim line and object can make brim be removed more " -"easily" -msgstr "在 brim（裙邊）和模型之間設定間隙，能夠讓 brim（裙邊）更容易剝離" +"easily." +msgstr "在 Brim 和模型之間設定間隙，能夠讓 Brim 更容易拆除" msgid "Brim ears" -msgstr "圓盤" +msgstr "耳狀 Brim" -#, fuzzy msgid "Only draw brim over the sharp edges of the model." -msgstr "僅在模型的鋒利邊緣上產生Brim（裙邊）。" +msgstr "僅在模型的鋒利邊緣上產生 Brim 。" msgid "Brim ear max angle" -msgstr "圓盤最大角度" +msgstr "耳狀 Brim 最大角度" -#, fuzzy msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" +"Maximum angle to let a brim ear appear.\n" +"If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"讓圓盤出現的最大角度。\n" -"如果設定為 0，則不會建立圓盤。\n" -"設定越趨近 180，除直線部分外，其他部分都會建立圓盤。" +"讓耳狀 Brim 出現的最大角度。\n" +"如果設定為 0，則不會建立 Brim。\n" +"設定越趨近 180，除直線部分外，其他部分都會建立 Brim。" msgid "Brim ear detection radius" -msgstr "圓盤偵測半徑" +msgstr "耳狀 Brim 偵測半徑" msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" +"The geometry will be decimated before detecting sharp angles. This parameter " +"indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate." msgstr "" "在偵測尖銳角度之前，幾何形狀將被簡化。此參數表示簡化的最小偏差長度。\n" "設為 0 以停用" -#, fuzzy -msgid "Compatible machine" -msgstr "相容的設備" +msgid "Select printers" +msgstr "" -#, fuzzy msgid "upward compatible machine" msgstr "向上相容的設備" -#, fuzzy -msgid "Compatible machine condition" -msgstr "相容的設備條件" +msgid "Condition" +msgstr "" -#, fuzzy -msgid "Compatible process profiles" -msgstr "相容的切片設定" +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"使用啟用的列印設備設定值來進行布林運算的表達式。如果此表達式的結果為 true，則" +"該設定檔將被視為與目前啟用的印表機設定檔相容。" -#, fuzzy -msgid "Compatible process profiles condition" -msgstr "相容的切片設定條件" +msgid "Select profiles" +msgstr "" -msgid "Print sequence, layer by layer or object by object" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"使用啟用的列印設定檔值來進行布林運算的表達式。如果此表達式的結果為 true，則該" +"設定檔將被視為與目前啟用的列印設定檔相容。" + +msgid "Print sequence, layer by layer or object by object." msgstr "列印順序，逐層列印或者逐件列印" msgid "By layer" @@ -9970,13 +11628,13 @@ msgid "By object" msgstr "逐件" msgid "Intra-layer order" -msgstr "" +msgstr "單層順序" -msgid "Print order within a single layer" -msgstr "" +msgid "Print order within a single layer." +msgstr "每一層的列印順序" msgid "As object list" -msgstr "" +msgstr "按照物件清單排序" msgid "Slow printing down for better layer cooling" msgstr "降低列印速度 以得到更好的冷卻" @@ -9985,83 +11643,69 @@ msgid "" "Enable this option to slow printing speed down to make the final layer time " "not shorter than the layer time threshold in \"Max fan speed threshold\", so " "that layer can be cooled for longer time. This can improve the cooling " -"quality for needle and small details" +"quality for needle and small details." msgstr "" -"勾選這個選項，將降低列印速度，使得最終的層列印時間不小於\"最大風扇速度臨界值" -"\"裡的層時間臨界值，從而使得該層獲得更久的冷卻。這能夠改善尖頂和小細節的冷卻" -"效果" +"啟用此選項可降低列印速度，確保最終層的列印時間不少於「最大風扇速度臨界值」中" +"的層時間設定值，以延長冷卻時間。此功能有助於提升針狀結構和細小細節的冷卻效果" msgid "Normal printing" msgstr "普通列印" msgid "" "The default acceleration of both normal printing and travel except initial " -"layer" +"layer." msgstr "除首層之外的預設的列印和空駛的加速度" -msgid "mm/s²" -msgstr "mm/s²" - -#, fuzzy msgid "Default filament profile" msgstr "預設線材設定檔" -#, fuzzy -msgid "Default filament profile when switch to this machine profile" +msgid "Default filament profile when switching to this machine profile." msgstr "切換設備自動更換預設線材設定檔" -#, fuzzy msgid "Default process profile" msgstr "預設切片設定檔" -#, fuzzy -msgid "Default process profile when switch to this machine profile" +msgid "Default process profile when switching to this machine profile." msgstr "切換設備自動更換預設切片設定檔" -#, fuzzy msgid "Activate air filtration" msgstr "開啟空氣過濾器/排風扇" -#, fuzzy msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "啟動空氣過濾器/排風扇。 G-code 指令：M106 P3 S（0-255）" msgid "Fan speed" msgstr "風扇速度" -#, fuzzy msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " -"filament custom gcode" +"Speed of exhaust fan during printing. This speed will override the speed in " +"filament custom G-code." msgstr "列印過程中排風扇的速度。此速度將覆蓋線材自訂 G-code 中的速度" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhaust fan after printing completes." msgstr "列印完成後排風扇的轉速" -#, fuzzy msgid "No cooling for the first" -msgstr "對前Ｎ層關閉部件風扇" +msgstr "前Ｎ層關閉零件風扇" -#, fuzzy msgid "" -"Close all cooling fan for the first certain layers. Cooling fan of the first " -"layer used to be closed to get better build plate adhesion" +"Turn off all cooling fans for the first few layers. This can be used to " +"improve build plate adhesion." msgstr "" -"對開始的一些層關閉所有的部件冷卻風扇。通常關閉首層冷卻用來獲得更好的首層黏附" +"對開始的一些層關閉所有的物件冷卻風扇。通常關閉首層冷卻用來獲得更好的首層黏附" msgid "Don't support bridges" msgstr "不支撐橋接" -#, fuzzy msgid "" -"Don't support the whole bridge area which make support very large. Bridge " -"usually can be printing directly without support if not very long" +"Don't support the whole bridge area which make support very large. Bridges " +"can usually be printed directly without support if not very long." msgstr "" "不對整個橋接面進行支撐，否則支撐體會很大。不是很長的橋接通常可以無支撐直接列" -"印。" +"印" -msgid "Thick bridges" -msgstr "厚橋" +msgid "Thick external bridges" +msgstr "增厚外部橋接" msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " @@ -10072,86 +11716,155 @@ msgstr "" "看起來更好，但只適用於較短的橋接距離。" msgid "Thick internal bridges" -msgstr "" +msgstr "增厚內部橋接" msgid "" "If enabled, thick internal bridges will be used. It's usually recommended to " "have this feature turned on. However, consider turning it off if you are " "using large nozzles." msgstr "" +"如果啟用，將使用較厚的內部橋接。通常建議開啟此功能。但如果使用較大的噴嘴，可" +"考慮關閉此選項。" -msgid "Don't filter out small internal bridges (beta)" -msgstr "" +msgid "Extra bridge layers (beta)" +msgstr "額外橋接層（Beta 版）" msgid "" -"This option can help reducing pillowing on top surfaces in heavily slanted " -"or curved models.\n" +"This option enables the generation of an extra bridge layer over internal " +"and/or external bridges.\n" "\n" -"By default, small internal bridges are filtered out and the internal solid " -"infill is printed directly over the sparse infill. This works well in most " -"cases, speeding up printing without too much compromise on top surface " -"quality. \n" +"Extra bridge layers help improve bridge appearance and reliability, as the " +"solid infill is better supported. This is especially useful in fast " +"printers, where the bridge and solid infill speeds vary greatly. The extra " +"bridge layer results in reduced pillowing on top surfaces, as well as " +"reduced separation of the external bridge layer from its surrounding " +"perimeters.\n" "\n" -"However, in heavily slanted or curved models especially where too low sparse " -"infill density is used, this may result in curling of the unsupported solid " -"infill, causing pillowing.\n" +"It is generally recommended to set this to at least 'External bridge only', " +"unless specific issues with the sliced model are found.\n" "\n" -"Enabling this option will print internal bridge layer over slightly " -"unsupported internal solid infill. The options below control the amount of " -"filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Disabled - Disables this option. This is the default behaviour and works " -"well in most cases.\n" -"\n" -"Limited filtering - Creates internal bridges on heavily slanted surfaces, " -"while avoiding creating uncessesary interal bridges. This works well for " -"most difficult models.\n" -"\n" -"No filtering - Creates internal bridges on every potential internal " -"overhang. This option is useful for heavily slanted top surface models. " -"However, in most cases it creates too many unecessary bridges." +"Options:\n" +"1. Disabled - does not generate second bridge layers. This is the default " +"and is set for compatibility purposes\n" +"2. External bridge only - generates second bridge layers for external-facing " +"bridges only. Please note that small bridges that are shorter or narrower " +"than the set number of perimeters will be skipped as they would not benefit " +"from a second bridge layer. If generated, the second bridge layer will be " +"extruded parallel to the first bridge layer to reinforce the bridge " +"strength\n" +"3. Internal bridge only - generates second bridge layers for internal " +"bridges over sparse infill only. Please note that the internal bridges count " +"towards the top shell layer count of your model. The second internal bridge " +"layer will be extruded as close to perpendicular to the first as possible. " +"If multiple regions in the same island, with varying bridge angles are " +"present, the last region of that island will be selected as the angle " +"reference\n" +"4. Apply to all - generates second bridge layers for both internal and " +"external-facing bridges\n" msgstr "" +"此選項可在內部和/或外部橋接結構上額外產生一層橋接填充。\n" +"\n" +"額外的橋接層能改善橋接區域的外觀與穩定性，提供更佳的實心填充支撐。這對於高速" +"列印機特別有幫助，因為橋接與實心填充的列印速度可能有顯著差異。額外的橋接層還" +"能減少頂部表面的起皺現象，並降低外部橋接層與周圍輪廓分離的風險。\n" +"\n" +"一般建議將此選項設定為「僅外部橋接」，除非特定的切片模型需要其他調整。\n" +"選項說明：\n" +"1. 停用 - 不啟用第二層橋接層（預設值，確保與其他設定相容）。\n" +"2.\t僅外部橋接 - 僅對外部橋接區域新增第二層橋接層。請注意，若橋接結構過短或寬" +"度小於設定的輪廓數量，則不會產生額外橋接層，因為這樣的結構不會受益於第二層橋" +"接。如果啟用，第二層橋接層將與第一層平行擠出，以提升橋接的強度。\n" +"3. 僅內部橋接 - 僅為內部橋接區域（例如稀疏填充上的橋接部分）新增第二層橋接" +"層。請注意，內部橋接層會計入模型的頂部外殼層數。第二層內部橋接層的擠出方向會" +"盡可能接近垂直於第一層，若同一區域內存在多個橋接角度，則該區域的最後一個部分" +"將作為角度參考。\n" +"4. 套用於所有橋接區域 - 為內部與外部橋接區域都新增第二層橋接層。\n" msgid "Disabled" msgstr "停用" -msgid "Limited filtering" +msgid "External bridge only" +msgstr "僅外部橋接" + +msgid "Internal bridge only" +msgstr "僅內部橋接" + +msgid "Apply to all" +msgstr "套用於所有橋接區域" + +msgid "Filter out small internal bridges" +msgstr "忽略過小的內部橋接" + +msgid "" +"This option can help reduce pillowing on top surfaces in heavily slanted or " +"curved models.\n" +"By default, small internal bridges are filtered out and the internal solid " +"infill is printed directly over the sparse infill. This works well in most " +"cases, speeding up printing without too much compromise on top surface " +"quality.\n" +"However, in heavily slanted or curved models, especially where too low a " +"sparse infill density is used, this may result in curling of the unsupported " +"solid infill, causing pillowing.\n" +"Enabling limited filtering or no filtering will print internal bridge layer " +"over slightly unsupported internal solid infill. The options below control " +"the sensitivity of the filtering, i.e. they control where internal bridges " +"are created:\n" +"1. Filter - enables this option. This is the default behavior and works well " +"in most cases\n" +"2. Limited filtering - creates internal bridges on heavily slanted surfaces " +"while avoiding unnecessary bridges. This works well for most difficult " +"models\n" +"3. No filtering - creates internal bridges on every potential internal " +"overhang. This option is useful for heavily slanted top surface models; " +"however, in most cases, it creates too many unnecessary bridges" msgstr "" +"此選項可幫助降低在高度傾斜或曲面模型上的頂部表面起皺問題。\n" +"預設情況下，小型內部橋接會被過濾掉，內部實心填充會直接列印在稀疏填充上。這種" +"方式適用於大多數情況，能提升列印速度，同時維持合理的頂部表面品質。\n" +"然而，在高度傾斜或曲面的模型上，特別是當稀疏填充密度過低時，未受支撐的實心填" +"充可能會翹曲，導致表面起皺。\n" +"啟用「有限過濾」或「不過濾」模式，將允許在部分未完全支撐的內部實心填充區域上" +"列印內部橋接層。下列選項可調整過濾的敏感度，決定哪些區域需要產生內部橋接。\n" +"選項說明：\n" +"1.\t過濾 - 預設選項，能有效過濾小型內部橋接，在大多數情況下效果良好。\n" +"2. 有限過濾 - 僅在高度傾斜的表面上建立內部橋接，同時避免產生過多無用的橋接結" +"構，適合處理較複雜的模型。\n" +"3.\t不過濾 - 在所有可能的內部懸垂區域上建立內部橋接，適用於高度傾斜的頂部表面" +"模型，但通常會產生過多不必要的橋接結構。" + +msgid "Limited filtering" +msgstr "局部篩選" msgid "No filtering" -msgstr "" +msgstr "不篩選" msgid "Max bridge length" msgstr "最大橋接長度" -#, fuzzy msgid "" "Max length of bridges that don't need support. Set it to 0 if you want all " "bridges to be supported, and set it to a very large value if you don't want " "any bridges to be supported." msgstr "" -"不需要支撐的橋接的最大長度。如果希望支援所有橋接，請將其設定為 0；如果不希望" -"支援任何橋接，請將其設定為非常大的值。" +"不需要支撐的橋接最大長度。如果希望支援所有橋接，請將其設定為 0；如果不希望支" +"援任何橋接，請將其設定為非常大的值。" -#, fuzzy msgid "End G-code" msgstr "結尾 G-code" -#, fuzzy -msgid "End G-code when finish the whole printing" +msgid "End G-code when finishing the entire print." msgstr "所有列印結束時的結尾 G-code" -msgid "Between Object Gcode" -msgstr "" +msgid "Between Object G-code" +msgstr "物件分隔" msgid "" -"Insert Gcode between objects. This parameter will only come into effect when " -"you print your models object by object" -msgstr "" +"Insert G-code between objects. This parameter will only come into effect " +"when you print your models object by object." +msgstr "在物件之間插入 G-code。此參數僅在逐次列印時生效" -#, fuzzy -msgid "End G-code when finish the printing of this filament" -msgstr "結束使用該耗材列印時的結尾 G-code" +msgid "End G-code when finishing the printing of this filament." +msgstr "使用該線材列印結束時的結尾 G-code" msgid "Ensure vertical shell thickness" msgstr "確保垂直外殼厚度" @@ -10166,34 +11879,41 @@ msgid "" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" +"在傾斜面附近新增實心填充，以保證垂直外殼的厚度（頂部+底部實心層）\n" +"無：不在任何地方新增實心填充。注意：如果您的模型有傾斜表面，請謹慎使用此選" +"項\n" +"僅關鍵部位：避免為牆體新增實心填充\n" +"適中：僅為大角度傾斜的表面新增實心填充\n" +"全部：為所有適合的傾斜表面新增實心填充\n" +"預設值為 全部。" msgid "Critical Only" -msgstr "" +msgstr "僅關鍵部分" msgid "Moderate" -msgstr "" +msgstr "適度" msgid "Top surface pattern" msgstr "頂面圖案" -msgid "Line pattern of top surface infill" +msgid "Line pattern of top surface infill." msgstr "頂面填充的走線圖案" -msgid "Concentric" -msgstr "同心" - -msgid "Rectilinear" -msgstr "直線" - msgid "Monotonic" msgstr "單調" msgid "Monotonic line" msgstr "單調線" +msgid "Rectilinear" +msgstr "直線" + msgid "Aligned Rectilinear" msgstr "直線排列" +msgid "Concentric" +msgstr "同心" + msgid "Hilbert Curve" msgstr "希爾伯特曲線" @@ -10206,7 +11926,7 @@ msgstr "八角螺旋" msgid "Bottom surface pattern" msgstr "底面圖案" -msgid "Line pattern of bottom surface infill, not bridge infill" +msgid "Line pattern of bottom surface infill, not bridge infill." msgstr "除了橋接外的底面填充的走線圖案" msgid "Internal solid infill pattern" @@ -10222,13 +11942,12 @@ msgstr "" msgid "" "Line width of outer wall. If expressed as a %, it will be computed over the " "nozzle diameter." -msgstr "外牆的線寬。如果以 % 表示，將以噴嘴直徑為基準來計算" +msgstr "外牆的線寬。如果以 % 表示，將以噴嘴直徑為基準來計算。" -#, fuzzy msgid "" "Speed of outer wall which is outermost and visible. It's used to be slower " "than inner wall speed to get better quality." -msgstr "外牆的列印速度。它通常使用比內壁速度慢的速度，以獲得更好的列印品質。" +msgstr "外牆的列印速度。它通常比內壁速度慢，以獲得更好的列印品質。" msgid "Small perimeters" msgstr "微小部位" @@ -10239,25 +11958,25 @@ msgid "" "example: 80%) it will be calculated on the outer wall speed setting above. " "Set to zero for auto." msgstr "" -"這個單獨的設定將影響半徑 <= small_perimeter_threshold（通常是圓孔）的周長的速" -"度。 如果以百分比表示（例如：80%），它將根據上面的外牆速度設定進行計算。 自動" -"設定為零。" +"此獨立設定將影響半徑小於或等於 small_perimeter_threshold 的外牆列印速度（通常" +"指孔洞）。若設定為百分比（如 80%），將基於上述外牆速度進行計算。設定為 0 表示" +"自動調整。" msgid "Small perimeters threshold" msgstr "微小部位周長臨界值" msgid "" -"This sets the threshold for small perimeter length. Default threshold is 0mm" +"This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "這設定了微小部位周長的臨界值。 預設臨界值是 0mm" msgid "Walls printing order" -msgstr "" +msgstr "牆列印順序" msgid "" -"Print sequence of the internal (inner) and external (outer) walls. \n" +"Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls " -"can adhere to a neighouring perimeter while printing. However, this option " +"can adhere to a neighbouring perimeter while printing. However, this option " "results in slightly reduced surface quality as the external perimeter is " "deformed by being squashed to the internal perimeter.\n" "\n" @@ -10267,59 +11986,78 @@ msgid "" "perimeter to print the external wall against. This option requires a minimum " "of 3 walls to be effective as it prints the internal walls from the 3rd " "perimeter onwards first, then the external perimeter and, finally, the first " -"internal perimeter. This option is recomended against the Outer/Inner option " -"in most cases. \n" +"internal perimeter. This option is recommended against the Outer/Inner " +"option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy " -"benefits of Inner/Outer/Inner option. However, the z seams will appear less " +"benefits of Inner/Outer/Inner option. However, the Z seams will appear less " "consistent as the first extrusion of a new layer starts on a visible " -"surface.\n" -"\n" -" " +"surface." msgstr "" +"『內牆』與『外牆』牆體的列印順序。\n" +"使用『內牆/外牆』順序可獲得最佳的懸空效果。這是因為懸空牆體在列印時可以附著到" +"相鄰的牆。然而，此選項會略微降低表面品質，因為外牆被壓到內牆上而變形。\n" +"使用『內牆/外牆/內牆』順序可獲得最佳的外表面光潔度和尺寸精度，因為外牆的列印" +"不會受到內牆影響。然而，因為外牆缺少內牆的支撐，懸空性能會有所降低。此選項需" +"要至少 3 層牆才能生效，它會先從第 3 層牆開始列印內牆，接著列印外部周邊，最後" +"列印最內層的內牆。在大多數情況下，建議選擇此選項，而不是外牆/內牆的順序設" +"定。\n" +"採用『外牆/內牆』順序可以達到與『內牆/外牆/內牆』設定相同的外牆表面品質與尺寸" +"精度。然而，Z 軸接縫的均勻性會稍差，因為新層的首次擠出會在可見的表面開始。" msgid "Inner/Outer" -msgstr "" +msgstr "內牆/外牆" msgid "Outer/Inner" -msgstr "" +msgstr "外牆/內牆" msgid "Inner/Outer/Inner" -msgstr "" +msgstr "內牆/外牆/內牆" msgid "Print infill first" -msgstr "" +msgstr "先列印填充" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed " "first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the " -"neighbouring infill to adhere to. However, the infill will slighly push out " +"neighbouring infill to adhere to. However, the infill will slightly push out " "the printed walls where it is attached to them, resulting in a worse " "external surface finish. It can also cause the infill to shine through the " "external surfaces of the part." msgstr "" +"牆體與填充的列印順序。當未勾選選框時，牆體會先列印，這在大多數情況下效果最" +"佳。\n" +"先列印填充可能對極端懸空有幫助，因為牆體可以附著在相鄰的填充上。然而，填充會" +"在接觸牆體處稍微推動牆體，導致外部表面光潔度下降。同時，填充還可能透過零件的" +"外表面顯現出來。" msgid "Wall loop direction" -msgstr "" +msgstr "牆體列印方向" msgid "" "The direction which the wall loops are extruded when looking down from the " "top.\n" "\n" "By default all walls are extruded in counter-clockwise, unless Reverse on " -"odd is enabled. Set this to any option other than Auto will force the wall " -"direction regardless of the Reverse on odd.\n" +"even is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on even.\n" "\n" -"This option will be disabled if sprial vase mode is enabled." +"This option will be disabled if spiral vase mode is enabled." msgstr "" +"從頂部俯視時，牆體迴圈的擠出方向。\n" +"\n" +"預設情況下，所有牆體以逆時針方向擠出，除非啟用了『偶數層反向』。若將此選項設" +"為非自動，則無論是否啟用『偶數層反向』，都將強制指定牆體方向。\n" +"\n" +"如果啟用了螺旋花瓶模式，該選項將被停用。" msgid "Counter clockwise" -msgstr "" +msgstr "逆時針" msgid "Clockwise" -msgstr "" +msgstr "順時針" msgid "Height to rod" msgstr "到橫杆高度" @@ -10343,13 +12081,13 @@ msgid "" msgstr "擠出機四周的避讓半徑。用於在逐件列印中避免碰撞。" msgid "Nozzle height" -msgstr "" +msgstr "噴嘴高度" msgid "The height of nozzle tip." -msgstr "" +msgstr "噴嘴尖端的高度。" msgid "Bed mesh min" -msgstr "" +msgstr "熱床網格最小值" msgid "" "This option sets the min point for the allowed bed mesh area. Due to the " @@ -10361,9 +12099,14 @@ msgid "" "your printer manufacturer. The default setting is (-99999, -99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" +"此選項設置允許的熱網格區域的最小值。由於探測器的 XY 偏移，大多數列印設備無法" +"探測整個熱床。為確保感測範圍不超出熱床區域，應適當設置熱床網格的最小值和最大" +"值。Snapmaker Orca 會確保 adaptive_bed_mesh_min/adaptive_bed_mesh_max 的值不超出" +"這些最小值/最大值。此訊息通常可從設備製造商處取得。預設設置為 (-99999, " +"-99999)，表示無限制，允許探測整個熱床。" msgid "Bed mesh max" -msgstr "" +msgstr "熱床網格最大值" msgid "" "This option sets the max point for the allowed bed mesh area. Due to the " @@ -10375,29 +12118,38 @@ msgid "" "your printer manufacturer. The default setting is (99999, 99999), which " "means there are no limits, thus allowing probing across the entire bed." msgstr "" +"此選項設置允許的熱網格區域的最大值。由於探測器的 XY 偏移，大多數列印設備無法" +"探測整個熱床。為確保感測範圍不超出熱床區域，應適當設置熱床網格的最小值和最大" +"值。Snapmaker Orca 會確保 adaptive_bed_mesh_min/adaptive_bed_mesh_max 的值不超出" +"這些最小值/最大值。此訊息通常可從設備製造商處取得。預設設置為 (-99999, " +"-99999)，表示無限制，允許探測整個熱床。" msgid "Probe point distance" -msgstr "" +msgstr "探測間距" msgid "" "This option sets the preferred distance between probe points (grid size) for " "the X and Y directions, with the default being 50mm for both X and Y." msgstr "" +"此選項用於設定 X 和 Y 方向探測點之間的首選距離（網格尺寸），預設值為 X 和 Y " +"方向各為 50mm。" msgid "Mesh margin" -msgstr "" +msgstr "網格邊緣距離" msgid "" "This option determines the additional distance by which the adaptive bed " "mesh area should be expanded in the XY directions." +msgstr "此選項決定自適應床面網格區域在 XY 方向上應該擴展的額外距離。" + +msgid "Grab length" msgstr "" msgid "Extruder Color" msgstr "擠出機顏色" -#, fuzzy -msgid "Only used as a visual help on UI" -msgstr "作為使用者介面上的輔助" +msgid "Only used as a visual help on UI." +msgstr "作為介面上的輔助" msgid "Extruder offset" msgstr "擠出機偏移" @@ -10405,81 +12157,216 @@ msgstr "擠出機偏移" msgid "Flow ratio" msgstr "流量比例" -#, fuzzy msgid "" -"The material may have volumetric change after switching between molten state " -"and crystalline state. This setting changes all extrusion flow of this " -"filament in gcode proportionally. Recommended value range is between 0.95 " -"and 1.05. Maybe you can tune this value to get nice flat surface when there " -"has slight overflow or underflow" +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow." msgstr "" "線材經過融化後凝固可能會產生體積差異。這個設定會等比例改變所有擠出走線的擠出" -"量。推薦的範圍為 0.95 到 1.05。發現大平層模型的頂面有輕微的缺料或多料時，或許" -"可以嘗試微調這個參數。" - -msgid "Enable pressure advance" -msgstr "啟用壓力提前" +"量。推薦的範圍為 0.95 到 1.05。發現模型的平面有輕微的缺料或多料時，或許可以嘗" +"試微調這個參數" msgid "" -"Enable pressure advance, auto calibration result will be overwriten once " +"The material may have volumetric change after switching between molten and " +"crystalline states. This setting changes all extrusion flow of this filament " +"in G-code proportionally. The recommended value range is between 0.95 and " +"1.05. You may be able to tune this value to get a nice flat surface if there " +"is slight overflow or underflow.\n" +"\n" +"The final object flow ratio is this value multiplied by the filament flow " +"ratio." +msgstr "" +"線材經過融化後凝固可能會產生體積差異。這個設定會等比例改變所有擠出走線的擠出" +"量。推薦的範圍為 0.95 到 1.05。發現模型的平面有輕微的缺料或多料時，或許可以嘗" +"試微調這個參數。\n" +"最終物體流量比是此值與線材流量比的乘積。" + +msgid "Enable pressure advance" +msgstr "啟用壓力補償" + +msgid "" +"Enable pressure advance, auto calibration result will be overwritten once " "enabled." -msgstr "啟用壓力提前，一旦啟用會覆蓋自動校準的結果" +msgstr "啟用壓力補償功能，啟用後將覆蓋自動校正結果。" -#, fuzzy -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" -msgstr "壓力提前（Klipper）或者線性提前（Marlin）" +msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." +msgstr "壓力補償（Klipper），也稱為線性前進係數（Marlin）" + +msgid "Enable adaptive pressure advance (beta)" +msgstr "自適應壓力補償功能（Beta）" + +#, no-c-format, no-boost-format +msgid "" +"With increasing print speeds (and hence increasing volumetric flow through " +"the nozzle) and increasing accelerations, it has been observed that the " +"effective PA value typically decreases. This means that a single PA value is " +"not always 100% optimal for all features and a compromise value is usually " +"used that does not cause too much bulging on features with lower flow speed " +"and accelerations while also not causing gaps on faster features.\n" +"\n" +"This feature aims to address this limitation by modeling the response of " +"your printer's extrusion system depending on the volumetric flow speed and " +"acceleration it is printing at. Internally, it generates a fitted model that " +"can extrapolate the needed pressure advance for any given volumetric flow " +"speed and acceleration, which is then emitted to the printer depending on " +"the current print conditions.\n" +"\n" +"When enabled, the pressure advance value above is overridden. However, a " +"reasonable default value above is strongly recommended to act as a fallback " +"and for when tool changing.\n" +"\n" +msgstr "" +"隨著列印速度的提高（因此噴嘴內的體積流速增加）以及加速度的增加，已觀察到有效" +"的壓力補償（PA）值通常會下降。這意味著單一的 PA 值並不總是對所有特徵都能達到" +"最佳效果，通常會使用一個折衷值，以減少在較低流速和加速度下的特徵出現過多凸" +"起，同時避免在更快的特徵中出現間隙。\n" +"\n" +"此功能旨在通過建模的方式，讓擠出系統在不同體積流速和加速度下的反應狀態來解決" +"這一限制。內部會產生一個擬合模型，可根據給定的體積流速和加速度推算出所需的壓" +"力補償值，並根據目前的列印條件將該值傳送到印表機。\n" +"\n" +"啟用後，上述的壓力補償值將被覆蓋。然而，建議設置一個合理的預設值，以作為備用" +"或擠出機更換時的回推值。\n" + +msgid "Adaptive pressure advance measurements (beta)" +msgstr "自適應壓力補償測量功能（Beta）" + +#, no-c-format, no-boost-format +msgid "" +"Add sets of pressure advance (PA) values, the volumetric flow speeds and " +"accelerations they were measured at, separated by a comma. One set of values " +"per line. For example\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"How to calibrate:\n" +"1. Run the pressure advance test for at least 3 speeds per acceleration " +"value. It is recommended that the test is run for at least the speed of the " +"external perimeters, the speed of the internal perimeters and the fastest " +"feature print speed in your profile (usually its the sparse or solid " +"infill). Then run them for the same speeds for the slowest and fastest print " +"accelerations, and no faster than the recommended maximum acceleration as " +"given by the Klipper input shaper\n" +"2. Take note of the optimal PA value for each volumetric flow speed and " +"acceleration. You can find the flow number by selecting flow from the color " +"scheme drop down and move the horizontal slider over the PA pattern lines. " +"The number should be visible at the bottom of the page. The ideal PA value " +"should be decreasing the higher the volumetric flow is. If it is not, " +"confirm that your extruder is functioning correctly. The slower and with " +"less acceleration you print, the larger the range of acceptable PA values. " +"If no difference is visible, use the PA value from the faster test\n" +"3. Enter the triplets of PA values, Flow and Accelerations in the text box " +"here and save your filament profile" +msgstr "" +"新增壓力補償 (PA) 值、體積流速和加速度的資料集，使用逗號分隔。每行一組資料。" +"例如：\n" +"0.04,3.96,3000\n" +"0.033,3.96,10000\n" +"0.029,7.91,3000\n" +"0.026,7.91,10000\n" +"\n" +"校正方法：\n" +"1. 為每個加速度值執行至少 3 個速度的壓力補償測試。建議至少測試外牆速度、內牆" +"速度和設定檔中最快的特徵列印速度（通常是稀疏或實心填充）。然後對最慢和最快的" +"列印加速度執行相同速度的測試，但不超過 Klipper 輸入整形器建議的最大加速度。\n" +"2. 記錄每個體積流速和加速度的最佳壓力補償 (PA) 值。您可以通過從顏色方案下拉選" +"單中選擇流量，並將水平滑桿移動到 PA 測試線的圖案來找到流量數值。該數值應顯示" +"在頁面底部。理想的 PA 值應隨著體積流速的增加而減小。如果不是，請檢查您的擠出" +"機是否正常工作。當列印速度較慢且加速度較低時，可接受的 PA 值範圍會更大。如果" +"看不出差異，請採用最快測試的 PA 值。\n" +"3. 將 PA 值、流量和加速度的三組資料輸入到此文字框中，然後保存您的線材設定檔" + +msgid "Enable adaptive pressure advance for overhangs (beta)" +msgstr "啟用懸挑自適應壓力提前 (beta)" + +msgid "" +"Enable adaptive PA for overhangs as well as when flow changes within the " +"same feature. This is an experimental option, as if the PA profile is not " +"set accurately, it will cause uniformity issues on the external surfaces " +"before and after overhangs.\n" +msgstr "" +"啟用自適應壓力補償 (PA) 功能，用於懸空部分及同一特徵的流量變化。此功能屬於實" +"驗性選項，若 PA 設定檔不夠精確，可能會導致懸空前後外表面出現不均勻現象。\n" + +msgid "Pressure advance for bridges" +msgstr "橋接的壓力補償" + +msgid "" +"Pressure advance value for bridges. Set to 0 to disable.\n" +"\n" +"A lower PA value when printing bridges helps reduce the appearance of slight " +"under extrusion immediately after bridges. This is caused by the pressure " +"drop in the nozzle when printing in the air and a lower PA helps counteract " +"this." +msgstr "" +"橋接的壓力補償值。設為 0 以停用此功能。降低橋接時的壓力補償值有助於減少橋接結" +"束後立即出現的輕微欠擠出現象。這種現象是由於在空中列印時噴嘴內壓力下降引起" +"的，而降低壓力補償值有助於抵消這一影響。" -#, fuzzy msgid "" "Default line width if other line widths are set to 0. If expressed as a %, " "it will be computed over the nozzle diameter." msgstr "" -"當線寬設定為 0 時走線的默認線寬。如果以 % 表示，將以噴嘴直徑為基準來計算。" +"當線寬設定為 0 時走線的預設線寬。如果以 % 表示，將以噴嘴直徑為基準來計算。" msgid "Keep fan always on" msgstr "保持風扇永遠開啟" -#, fuzzy msgid "" -"If enable this setting, part cooling fan will never be stoped and will run " -"at least at minimum speed to reduce the frequency of starting and stoping" +"Enabling this setting means that the part cooling fan will never stop " +"completely and will run at least at minimum speed to reduce the frequency of " +"starting and stopping." msgstr "" -"如果勾選這個選項，部件冷卻風扇將永遠不會停止，並且會以最小風扇轉速設定值持運" -"運轉以減少風扇的頻繁開關" +"如果勾選這個選項，物件冷卻風扇將不會停止，並且會以最小風扇轉速設定值運轉以減" +"少風扇的頻繁開關" msgid "Don't slow down outer walls" -msgstr "" +msgstr "列印外牆不減速" +#, fuzzy msgid "" "If enabled, this setting will ensure external perimeters are not slowed down " "to meet the minimum layer time. This is particularly helpful in the below " "scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" +"1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall " -"artefacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " -"external walls\n" -"\n" +"artifacts that appear like Z banding\n" +"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " +"external walls" msgstr "" +"啟用此設定後，外牆的列印速度將不會為了滿足每層最短列印時間而減慢，這對以下情" +"況特別有用：\n" +"1.\t列印亮面耗材時，避免光澤不均的問題。\n" +"2. 避免因外牆速度變化而產生類似 Z 條紋的瑕疵。\n" +"3. 防止外牆因列印速度過快而出現 VFAs（細微表面瑕疵）。\n" +"\n" +"譯者補充：最小層時間（Minimum Layer Time）是指列印每一層所需的最短時間。如果" +"列印機以較快的速度完成一層的列印時間短於這個設定值，為了確保每層有足夠的時間" +"冷卻和固化，列印機會自動減慢速度，以延長該層的列印時間，達到最小層時間的要" +"求。這樣可以避免因冷卻不足而導致的列印缺陷，如層間附著不良或變形。" msgid "Layer time" -msgstr "層時間" +msgstr "每一層列印時間" -#, fuzzy msgid "" "Part cooling fan will be enabled for layers of which estimated time is " "shorter than this value. Fan speed is interpolated between the minimum and " -"maximum fan speeds according to layer printing time" +"maximum fan speeds according to layer printing time." msgstr "" -"當層預估列印時間小於該數值時，部件冷卻風扇將會被開啟。風扇轉速將根據層列印時" +"當層預估列印時間小於該數值時，物件冷卻風扇將會被開啟。風扇轉速將根據層列印時" "間在最大和最小風扇轉速之間自動調整" msgid "Default color" msgstr "預設顏色" -msgid "Default filament color" -msgstr "預設線材顏色" +msgid "" +"Default filament color.\n" +"Right click to reset value to system default." +msgstr "" msgid "Filament notes" msgstr "線材備註" @@ -10495,40 +12382,103 @@ msgid "" "of nozzle's HRC." msgstr "列印此線材的所需的最小噴嘴硬度。零值表示不檢查噴嘴硬度。" -#, fuzzy +msgid "Filament map to extruder" +msgstr "" + +msgid "Filament map to extruder." +msgstr "" + +msgid "filament mapping mode" +msgstr "" + +msgid "Auto For Flush" +msgstr "" + +msgid "Auto For Match" +msgstr "" + +msgid "Flush temperature" +msgstr "" + +msgid "" +"Temperature when flushing filament. 0 indicates the upper bound of the " +"recommended nozzle temperature range." +msgstr "" + +msgid "Flush volumetric speed" +msgstr "" + +msgid "" +"Volumetric speed when flushing filament. 0 indicates the max volumetric " +"speed." +msgstr "" + msgid "" "This setting stands for how much volume of filament can be melted and " "extruded per second. Printing speed is limited by max volumetric speed, in " -"case of too high and unreasonable speed setting. Can't be zero" +"case of too high and unreasonable speed setting. Can't be zero." msgstr "" -"這個設定表示在 1 秒內能夠融化和擠出的線材體積。列印速度會受到最大體積速度的限" -"制，防止設定過高和不合理的速度。不允許設定為 0。" - -msgid "mm³/s" -msgstr "mm³/s" +"這個設定表示每秒能夠融化和擠出的線材體積。列印速度會受限於到最大體積速度，防" +"止設定過高和不合理的速度。不允許設定為 0" msgid "Filament load time" msgstr "進料的時間" -msgid "Time to load new filament when switch filament. For statistics only" -msgstr "切換線材時，進料所需的時間。只用於統計資訊。" +msgid "" +"Time to load new filament when switch filament. It's usually applicable for " +"single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"更換耗材時加載新耗材的時間，通常適用於單噴頭多材料的列印機。對於具備擠出機切" +"換功能或多擠出機系統的設備，此值通常設為 0，僅作為統計參考" msgid "Filament unload time" msgstr "退料的時間" -msgid "Time to unload old filament when switch filament. For statistics only" -msgstr "切換線材時，退料所需時間。只用於統計資訊。" +msgid "" +"Time to unload old filament when switch filament. It's usually applicable " +"for single-extruder multi-material machines. For tool changers or multi-tool " +"machines, it's typically 0. For statistics only." +msgstr "" +"更換耗材時卸載舊耗材的時間，通常適用於單噴頭多材料的列印機。於具備擠出機切換" +"功能或多擠出機系統的設備，此值通常設為 0，僅作為統計參考" + +msgid "Tool change time" +msgstr "擠出機替換時間" msgid "" -"Filament diameter is used to calculate extrusion in gcode, so it's important " -"and should be accurate" -msgstr "線材直徑被用於計算 G-code 檔案中的擠出量。因此很重要，應盡可能精確。" +"Time taken to switch tools. It's usually applicable for tool changers or " +"multi-tool machines. For single-extruder multi-material machines, it's " +"typically 0. For statistics only." +msgstr "" +"切換擠出機所需的時間，通常適用於具備擠出機切換功能或多擠出機系統的設備。對於" +"單噴頭多材料的列印機，此值一般設為 0，僅作為統計參考" -msgid "Pellet flow coefficient" +msgid "Bed temperature type" msgstr "" msgid "" -"Pellet flow coefficient is emperically derived and allows for volume " +"This option determines how the bed temperature is set during slicing: based " +"on the temperature of the first filament or the highest temperature of the " +"printed filaments." +msgstr "" + +msgid "By First filament" +msgstr "" + +msgid "By Highest Temp" +msgstr "" + +msgid "" +"Filament diameter is used to calculate extrusion in G-code, so it is " +"important and should be accurate." +msgstr "線材直徑被用於計算 G-code 檔案中的擠出量。因此很重要，應盡可能精確" + +msgid "Pellet flow coefficient" +msgstr "顆粒材料流量係數" + +msgid "" +"Pellet flow coefficient is empirically derived and allows for volume " "calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume " @@ -10536,51 +12486,79 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" +"顆粒流量係數是基於實驗資料得出的，用於計算顆粒列印機的材料體積。\n" +"在內部系統中，該係數會被轉換為耗材直徑，而其它體積計算方式則維持不變。\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgid "Shrinkage" -msgstr "耗材收縮率" +msgid "Adaptive volumetric speed" +msgstr "" + +msgid "" +"When enabled, the extrusion flow is limited by the smaller of the fitted " +"value (calculated from line width and layer height) and the user-defined " +"maximum flow. When disabled, only the user-defined maximum flow is applied." +msgstr "" + +msgid "Max volumetric speed multinomial coefficients" +msgstr "" + +msgid "Shrinkage (XY)" +msgstr "收縮（XY）" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"if you measure 94mm instead of 100mm). The part will be scaled in XY to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" -"冷卻後耗材會收縮的百分比（如果測量的長度是 94mm 而不是 100mm，則為是收縮率為 " -"94%）\n" -"補償將按比例縮放 xy 軸該補償僅考慮牆壁所使用的耗材\n" -"請確保物體之間有足夠的間距，因為補償是在邊界檢查之後進行" +"輸入耗材冷卻後的收縮率百分比（例如，如果測量結果為 94mm 而非 100mm，則填寫 " +"94%）。\n" +"零件的 XY 平面將根據此設定進行縮放補償，僅計算用於列印牆的耗材量。\n" +"請確保物件間預留足夠的空間，因為此補償是在完成檢查後才執行的。" + +msgid "Shrinkage (Z)" +msgstr "收縮（Z）" + +#, no-c-format, no-boost-format +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling (94% " +"if you measure 94mm instead of 100mm). The part will be scaled in Z to " +"compensate." +msgstr "" +"輸入耗材冷卻後的收縮百分比（例如，如果測量值為 94mm 而不是 100mm，則填寫 " +"94%）。零件的 Z 軸尺寸將被縮放以進行補償。" + +msgid "Adhesiveness Category" +msgstr "" + +msgid "Filament category." +msgstr "" -#, fuzzy msgid "Loading speed" msgstr "進料速度" msgid "Speed used for loading the filament on the wipe tower." -msgstr "將線材擠出到擦拭塔上的速度。" +msgstr "將線材擠出到換料塔上的速度。" -#, fuzzy msgid "Loading speed at the start" msgstr "啟動時進料速度" -#, fuzzy msgid "Speed used at the very beginning of loading phase." msgstr "初始進料階段速度。" msgid "Unloading speed" msgstr "退料速度" -#, fuzzy msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " +"Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." -msgstr "使用於擦拭塔上退料的速度（不影響尖端成型之後初始部分的速度）。" +msgstr "用於在換料塔上退料速度（不影響尖端成型之後初始部分的速度）。" msgid "Unloading speed at the start" msgstr "退料初始速度" -#, fuzzy msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "線材尖端成型後立即退料的速度。" @@ -10589,8 +12567,8 @@ msgid "Delay after unloading" msgstr "退料後延遲" msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " +"Time to wait after the filament is unloaded. May help to get reliable tool " +"changes with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" "退料後等待的時間。有助於使用柔性線材（收縮到原始尺寸需更多的時間）以獲得可靠" @@ -10604,6 +12582,23 @@ msgid "" "Specify desired number of these moves." msgstr "藉由在喉管中來回移動以冷卻線材。指定移動所需的次數。" +msgid "Stamping loading speed" +msgstr "沖壓機的載入速度" + +msgid "Speed used for stamping." +msgstr "進行沖壓操作時所使用的速度。" + +msgid "Stamping distance measured from the center of the cooling tube" +msgstr "沖壓距離是以冷卻管的中心作為參考點進行測量" + +msgid "" +"If set to non-zero value, filament is moved toward the nozzle between the " +"individual cooling moves (\"stamping\"). This option configures how long " +"this movement should be before the filament is retracted again." +msgstr "" +"當此設定為非零值時，耗材會在每次冷卻移動（沖壓）之間向噴嘴推進。該選項用於設" +"定在耗材回抽之前的推進持續時間。" + msgid "Speed of the first cooling move" msgstr "第一次冷卻移動的速度" @@ -10611,7 +12606,7 @@ msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "從這個速度開始冷卻移動逐漸加速。" msgid "Minimal purge on wipe tower" -msgstr "擦拭塔上的最小清理量" +msgstr "換料塔上的最小清理量" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -10620,8 +12615,8 @@ msgid "" "object, Snapmaker Orca will always prime this amount of material into the wipe " "tower to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"換色後，新載入的線材在噴嘴內的確切位置可能未知，耗材壓力可能還不穩定。在沖刷" -"列印頭到填充或作為擠出廢料之前，將始終將這些的線材沖刷到擦拭塔中以產生連續的" +"換色後，新載入的線材在噴嘴內的確切位置可能未知，線材壓力可能還不穩定。在沖刷" +"列印頭到填充或作為擠出廢料之前，將始終將這些的線材沖刷到換料塔中以產生連續的" "填充或穩定的擠出廢料。" msgid "Speed of the last cooling move" @@ -10630,15 +12625,6 @@ msgstr "最後一次冷卻移動的速度" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "冷卻移動向這個速度逐漸加速。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"在換色時（執行 T-code ，如 T1，T2），列印設備韌體（或 Multi Material Unit " -"2.0）載入新線材的所需時間。該時間將會被 G-code 時間評估功能加到總列印時間上" -"去。" - msgid "Ramming parameters" msgstr "尖端成型參數" @@ -10647,72 +12633,75 @@ msgid "" "parameters." msgstr "此內容由尖端成型欄位編輯，包含尖端成型的特定參數。" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"換色期間（執行T-cide 時如 T1，T2），列印設備韌體（或 Multi Material Unit " -"2.0）退出線材所需時間。該時間將會被 G-code 時間評估功能加到總列印時間上去。" - -msgid "Enable ramming for multitool setups" +msgid "Enable ramming for multi-tool setups" msgstr "使用多色尖端成形設定" msgid "" -"Perform ramming when using multitool printer (i.e. when the 'Single Extruder " -"Multimaterial' in Printer Settings is unchecked). When checked, a small " -"amount of filament is rapidly extruded on the wipe tower just before the " -"toolchange. This option is only used when the wipe tower is enabled." +"Perform ramming when using multi-tool printer (i.e. when the 'Single " +"Extruder Multimaterial' in Printer Settings is unchecked). When checked, a " +"small amount of filament is rapidly extruded on the wipe tower just before " +"the tool change. This option is only used when the wipe tower is enabled." msgstr "" "多色列印設備執行尖端成型時（即，當列印設備設定中的單擠出機多材料未選取時）。" -"選取時，在換色之前，會迅速擠出少量線材絲到擦拭塔上。此選項僅在啟用擦拭塔時使" +"選取時，在換色之前，會迅速擠出少量線材絲到換料塔上。此選項僅在啟用換料塔時使" "用。" -msgid "Multitool ramming volume" +msgid "Multi-tool ramming volume" msgstr "多色尖端成型體積" -msgid "The volume to be rammed before the toolchange." -msgstr "換色前尖端成型的體積" +msgid "The volume to be rammed before the tool change." +msgstr "換色前尖端成型的體積。" -msgid "Multitool ramming flow" +msgid "Multi-tool ramming flow" msgstr "多色尖端成型流量" -msgid "Flow used for ramming the filament before the toolchange." -msgstr "換色前線材尖端成型的流量" +msgid "Flow used for ramming the filament before the tool change." +msgstr "換色前線材尖端成型的流量。" msgid "Density" msgstr "密度" -msgid "Filament density. For statistics only" -msgstr "線材的密度。只用於統計資訊。" +msgid "Filament density. For statistics only." +msgstr "線材的密度。只用於統計資訊" -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" +msgid "The material type of filament." msgstr "線材的材料類型" msgid "Soluble material" msgstr "可溶性材料" msgid "" -"Soluble material is commonly used to print support and support interface" +"Soluble material is commonly used to print supports and support interfaces." msgstr "可溶性材料通常用於列印支撐和支撐面" +msgid "Filament ramming length" +msgstr "" + +msgid "" +"When changing the extruder, it is recommended to extrude a certain length of " +"filament from the original extruder. This helps minimize nozzle oozing." +msgstr "" + msgid "Support material" msgstr "支撐材料" msgid "" -"Support material is commonly used to print support and support interface" +"Support material is commonly used to print supports and support interfaces." msgstr "支撐材料通常用於列印支撐體和支撐接觸面" +msgid "Filament printable" +msgstr "" + +msgid "The filament is printable in extruder." +msgstr "" + msgid "Softening temperature" msgstr "線材軟化溫度" msgid "" "The material softens at this temperature, so when the bed temperature is " -"equal to or greater than it, it's highly recommended to open the front door " -"and/or remove the upper glass to avoid cloggings." +"equal to or greater than this, it's highly recommended to open the front " +"door and/or remove the upper glass to avoid clogging." msgstr "" "線材在此溫度下容易軟化，因此當熱床床溫等於或高於該溫度時，強烈建議打開前門和/" "或拆下上部玻璃以避免堵塞。" @@ -10720,43 +12709,36 @@ msgstr "" msgid "Price" msgstr "價格" -msgid "Filament price. For statistics only" -msgstr "線材的價格。只用於統計資訊。" +msgid "Filament price. For statistics only." +msgstr "線材的價格。只用於統計資訊" -#, fuzzy msgid "money/kg" msgstr "元/公斤" msgid "Vendor" -msgstr "供應商" +msgstr "廠牌" -msgid "Vendor of filament. For show only" -msgstr "列印線材的供應商。僅用於展示。" +msgid "Vendor of filament. For show only." +msgstr "列印線材的廠牌。僅用於展示" msgid "(Undefined)" msgstr "（未定義）" msgid "Sparse infill direction" -msgstr "" +msgstr "稀疏填充方向" msgid "" "Angle for sparse infill pattern, which controls the start or main direction " -"of line" -msgstr "稀疏填充圖案的角度，決定走線的開始或整體方向。" +"of line." +msgstr "稀疏填充圖案的角度，決定走線的開始或整體方向" msgid "Solid infill direction" -msgstr "" +msgstr "實心填充方向" msgid "" "Angle for solid infill pattern, which controls the start or main direction " -"of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "" +"of line." +msgstr "實心填充圖案的角度設定，用於決定線條的起始方向或主要列印方向" msgid "Sparse infill density" msgstr "稀疏填充密度" @@ -10764,38 +12746,69 @@ msgstr "稀疏填充密度" #, no-c-format, no-boost-format msgid "" "Density of internal sparse infill, 100% turns all sparse infill into solid " -"infill and internal solid infill pattern will be used" +"infill and internal solid infill pattern will be used." +msgstr "" +"設定內部稀疏填充的密度，當密度為 100% 時，所有稀疏填充將變為實心填充，並套用" +"內部實心填充的圖案" + +msgid "Align infill direction to model" +msgstr "" + +msgid "" +"Aligns infill and surface fill directions to follow the model's orientation " +"on the build plate. When enabled, fill directions rotate with the model to " +"maintain optimal strength characteristics." +msgstr "" + +msgid "Insert solid layers" +msgstr "" + +msgid "" +"Insert solid infill at specific layers. Use N to insert every Nth layer, N#K " +"to insert K consecutive solid layers every N layers (K is optional, e.g. " +"'5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at " +"explicit layers. Layers are 1-based." +msgstr "" + +msgid "Fill Multiline" +msgstr "" + +msgid "" +"Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "稀疏填充圖案" -msgid "Line pattern for internal sparse infill" +msgid "Line pattern for internal sparse infill." msgstr "內部稀疏填充的走線圖案" -msgid "Grid" -msgstr "網格" +msgid "Zig Zag" +msgstr "" + +msgid "Cross Zag" +msgstr "" + +msgid "Locked Zag" +msgstr "" msgid "Line" msgstr "線" -msgid "Cubic" -msgstr "立方體" +msgid "Grid" +msgstr "網格" msgid "Tri-hexagon" msgstr "內六邊形" -msgid "Gyroid" -msgstr "螺旋體" - -msgid "Honeycomb" -msgstr "蜂窩" +msgid "Cubic" +msgstr "立方體" msgid "Adaptive Cubic" msgstr "自適應立方體" -msgid "3D Honeycomb" -msgstr "3D 蜂窩" +msgid "Quarter Cubic" +msgstr "四分之一立方" msgid "Support Cubic" msgstr "支撐立方體" @@ -10803,13 +12816,56 @@ msgstr "支撐立方體" msgid "Lightning" msgstr "閃電" +msgid "Honeycomb" +msgstr "蜂窩" + +msgid "3D Honeycomb" +msgstr "3D 蜂窩" + +msgid "Lateral Honeycomb" +msgstr "" + +msgid "Lateral Lattice" +msgstr "2D 網格結構" + msgid "Cross Hatch" +msgstr "交叉填充" + +msgid "TPMS-D" +msgstr "" + +msgid "TPMS-FK" +msgstr "" + +msgid "Gyroid" +msgstr "螺旋體" + +msgid "Lateral lattice angle 1" +msgstr "網格結構角度 1" + +msgid "" +"The angle of the first set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Z 軸方向第一組 2D 網格結構的角度，0° 表示垂直方向。" + +msgid "Lateral lattice angle 2" +msgstr "網格結構角度 2" + +msgid "" +"The angle of the second set of Lateral lattice elements in the Z direction. " +"Zero is vertical." +msgstr "Z 軸方向第二組 2D 網格結構的角度，0° 表示垂直方向。" + +msgid "Infill overhang angle" +msgstr "" + +msgid "" +"The angle of the infill angled lines. 60° will result in a pure honeycomb." msgstr "" msgid "Sparse infill anchor length" msgstr "稀疏填充錨線長度" -#, fuzzy msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " @@ -10818,17 +12874,16 @@ msgid "" "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " -"anchor_length_max. \n" +"anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a " "single infill line." msgstr "" -"用附加周長的一小段將填充線連接到內部周長。如果以百分比（例如：15%）表示，則計" -"算填充拉伸寬度。Snapmaker Orca 試圖將兩條緊密的填充線連接到一個短的周長段。如果" -"找不到短於“填充”和“錨點”最大值的周長線段，則填充線僅在一側連接到周長線段，並" -"且所取周長線段的長度僅限於此參數，但不超過“錨點長度”最大值。將此參數設定為" -"零，以禁用連接到單個填充線的錨點周長。" +"將填充線透過一小段額外的牆與內牆連接。如果以百分比形式設定（如 15%），此數值" +"是基於填充擠出寬度進行計算。Snapmaker Orca 會嘗試將兩條靠近的填充線連接到一段較" +"短的牆。如果沒有找到比 infill_anchor_max 更短的牆，則填充線會只連接到一側的" +"牆，且該段的長度受此參數限制，但不會超過 anchor_length_max。 \n" +"將此參數設為 0 可停用單條填充線與牆的錨接功能。" -#, fuzzy msgid "0 (no open anchors)" msgstr "0（無錨線）" @@ -10838,7 +12893,6 @@ msgstr "1000（無限制）" msgid "Maximum length of the infill anchor" msgstr "填充錨線的最大長度" -#, fuzzy msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " @@ -10847,39 +12901,36 @@ msgid "" "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " -"parameter. \n" +"parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should " "create the same result as with 1000 & 0." msgstr "" -"用附加周長的一小段將填充線連接到內部周長。如果以百分比（例如：15%）表示，則計" -"算填充拉伸寬度。Snapmaker Orca 試圖將兩條緊密的填充線連接到一個短的周長段。如果" -"找不到比此參數短的周長線段，則填充線僅在一側連接到周長線段，並且所採用的周長" -"線段的長度僅限於 infl_anchor，但不超過此參數。將此參數設定為零以禁用錨點。" +"將填充線透過一小段額外的牆與內牆連接。如果以百分比形式設定（如 15%），此數值" +"是基於填充擠出寬度進行計算。Snapmaker Orca 會嘗試將兩條靠近的填充線連接到一段較" +"短的牆。如果沒有找到短於此參數的牆，則填充線會只連接到單側牆，且該牆的長度受 " +"infill_anchor 限制，但不會超過此參數的設定值。若此參數設定為 0，將啟用舊版填" +"充連接算法，並產生與設置為 1000 和 0 相同的結果。" msgid "0 (Simple connect)" msgstr "0（簡單連接）" -#, fuzzy -msgid "Acceleration of outer walls" +msgid "Acceleration of outer walls." msgstr "外牆的加速度。它通常使用比內壁速度慢的加速度，以獲得更好的列印品質" -#, fuzzy -msgid "Acceleration of inner walls" -msgstr "內圈牆加速度，使用較低值可以改善列印品質。" +msgid "Acceleration of inner walls." +msgstr "內牆加速度，使用較低值可以改善列印品質" -msgid "Acceleration of travel moves" +msgid "Acceleration of travel moves." msgstr "空駛加速度" -#, fuzzy msgid "" "Acceleration of top surface infill. Using a lower value may improve top " -"surface quality" +"surface quality." msgstr "頂面填充的加速度。使用較低值可能會改善頂面列印品質" -msgid "Acceleration of outer wall. Using a lower value can improve quality" -msgstr "外牆加速度。使用較小的值可以提高列印品質。" +msgid "Acceleration of outer wall. Using a lower value can improve quality." +msgstr "外牆加速度。使用較小的值可以提高列印品質" -#, fuzzy msgid "" "Acceleration of bridges. If the value is expressed as a percentage (e.g. " "50%), it will be calculated based on the outer wall acceleration." @@ -10906,39 +12957,50 @@ msgstr "" msgid "" "Acceleration of initial layer. Using a lower value can improve build plate " -"adhesive" -msgstr "首層加速度。使用較低值可以改善和列印板的黏附。" +"adhesion." +msgstr "首層加速度。使用較低值可以改善和列印板的黏附" msgid "Enable accel_to_decel" msgstr "啟用煞車速度" -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "Klipper 會依照煞車速度值自動調整" +msgid "Klipper's max_accel_to_decel will be adjusted automatically." +msgstr "Klipper 會依照煞車速度自動調整" msgid "accel_to_decel" msgstr "煞車速度" #, c-format, boost-format msgid "" -"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" +"Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper 的最大煞車速度將調整為加速度的 %%" -msgid "Jerk of outer walls" +msgid "Default jerk." +msgstr "" + +msgid "Junction Deviation" +msgstr "轉折偏移值" + +msgid "" +"Marlin Firmware Junction Deviation (replaces the traditional XY Jerk " +"setting)." +msgstr "" + +msgid "Jerk of outer walls." msgstr "外牆抖動值" -msgid "Jerk of inner walls" +msgid "Jerk of inner walls." msgstr "內牆抖動值" -msgid "Jerk for top surface" +msgid "Jerk for top surface." msgstr "頂面抖動值" -msgid "Jerk for infill" +msgid "Jerk for infill." msgstr "填充抖動" -msgid "Jerk for initial layer" +msgid "Jerk for initial layer." msgstr "首層抖動值" -msgid "Jerk for travel" +msgid "Jerk for travel." msgstr "空駛抖動值" msgid "" @@ -10951,22 +13013,22 @@ msgstr "首層層高" msgid "" "Height of initial layer. Making initial layer height to be thick slightly " -"can improve build plate adhesion" +"can improve build plate adhesion." msgstr "首層層高" -msgid "Speed of initial layer except the solid infill part" +msgid "Speed of initial layer except the solid infill part." msgstr "首層除實心填充之外的其他部分的列印速度" msgid "Initial layer infill" msgstr "首層填充" -msgid "Speed of solid infill part of initial layer" +msgid "Speed of solid infill part of initial layer." msgstr "首層實心填充的列印速度" msgid "Initial layer travel speed" msgstr "首層空駛速度" -msgid "Travel speed of initial layer" +msgid "Travel speed of initial layer." msgstr "首層空駛速度" msgid "Number of slow layers" @@ -10975,12 +13037,12 @@ msgstr "慢速列印層數" msgid "" "The first few layers are printed slower than normal. The speed is gradually " "increased in a linear fashion over the specified number of layers." -msgstr "減慢前幾層的列印速度。列印速度會逐漸加速到滿速" +msgstr "減慢前幾層的列印速度。列印速度會逐漸加速到滿速。" msgid "Initial layer nozzle temperature" msgstr "首層列印溫度" -msgid "Nozzle temperature to print initial layer when using this filament" +msgid "Nozzle temperature for printing initial layer when using this filament." msgstr "列印首層時的噴嘴溫度" msgid "Full fan speed at layer" @@ -10993,33 +13055,61 @@ msgid "" "\"close_fan_the_first_x_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"風扇速度將從“禁用第一層”的零線性上升到“全風扇速度層”的最大。如果低於“禁用風扇" -"第一層”，則“全風扇速度第一層”將被忽略，在這種情況下，風扇將在“禁用風扇第一" -"層”+1層以最大允許速度運行。" +"風扇速度會從第「close_fan_the_first_x_layers」層開始，從零速以線性方式逐漸增" +"加，直到第「full_fan_speed_layer」層達到最大速度。如果" +"「full_fan_speed_layer」的設定值小於「close_fan_the_first_x_layers」，則" +"「full_fan_speed_layer」會被忽略，此時風扇會在「close_fan_the_first_x_layers " +"+ 1」層以允許的最高速度運行。" msgid "layer" -msgstr "" +msgstr "層" -#, fuzzy msgid "Support interface fan speed" -msgstr "支撐接觸面風扇速度" +msgstr "支撐界面風扇速度" -#, fuzzy msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." +"This part cooling fan speed is applied when printing support interfaces. " +"Setting this parameter to a higher than regular speed reduces the layer " +"binding strength between supports and the supported part, making them easier " +"to separate.\n" +"Set to -1 to disable it.\n" +"This setting is overridden by disable_fan_first_layers." +msgstr "" +"此冷卻風扇速度適用於列印支撐介面時。將此值設為高於正常速度，可減少支撐結構與" +"受支撐零件之間的黏結強度，使拆除支撐更容易。\n" +"若設為 -1，則停用此功能。\n" +"此設定會被 disable_fan_first_layers 覆寫。" + +msgid "Internal bridges fan speed" +msgstr "內部橋接風扇轉速" + +msgid "" +"The part cooling fan speed used for all internal bridges. Set to -1 to use " +"the overhang fan speed settings instead.\n" +"\n" +"Reducing the internal bridges fan speed, compared to your regular fan speed, " +"can help reduce part warping due to excessive cooling applied over a large " +"surface for a prolonged period of time." +msgstr "" +"此風扇轉速適用於所有內部橋接。若設為 -1，則改用懸垂風扇速度設定。\n" +"\n" +"適當降低內部橋接的風扇轉速（相較於一般風扇速度），可減少因長時間對大面積區域" +"過度冷卻而導致的零件翹曲。" + +msgid "Ironing fan speed" +msgstr "" + +msgid "" +"This part cooling fan speed is applied when ironing. Setting this parameter " +"to a lower than regular speed reduces possible nozzle clogging due to the " +"low volumetric flow rate, making the interface smoother.\n" +"Set to -1 to disable it." msgstr "" -"所有支撐接觸層列印期間強制執行速度，透過高轉速風扇速度減少支撐與物件的融" -"合。\n" -"設定為 -1 以停用。" -#, fuzzy msgid "" "Randomly jitter while printing the wall, so that the surface has a rough " -"look. This setting controls the fuzzy position" -msgstr "列印外牆時隨機抖動，使外表面產生絨毛效果。這個設定決定適用的位置。" +"look. This setting controls the fuzzy position." +msgstr "列印外牆時隨機抖動，使外表面產生絨毛效果。這個設定決定適用的位置" msgid "Contour" msgstr "輪廓" @@ -11034,83 +13124,193 @@ msgid "Fuzzy skin thickness" msgstr "絨毛表面厚度" msgid "" -"The width within which to jitter. It's adversed to be below outer wall line " -"width" -msgstr "產生絨毛的抖動的寬度。建議小於外圈牆的線寬。" +"The width within which to jitter. It's advised to be below outer wall line " +"width." +msgstr "產生絨毛的抖動的寬度。建議小於外圈牆的線寬" msgid "Fuzzy skin point distance" msgstr "絨毛表面點間距" msgid "" -"The average diatance between the random points introducded on each line " -"segment" +"The average distance between the random points introduced on each line " +"segment." msgstr "產生絨毛表面時，插入的隨機點之間的平均距離" msgid "Apply fuzzy skin to first layer" +msgstr "在第一層啟用絨毛表面" + +msgid "Whether to apply fuzzy skin on the first layer." +msgstr "是否啟用絨毛表面於第一層" + +msgid "Fuzzy skin generator mode" msgstr "" -msgid "Whether to apply fuzzy skin on the first layer" +#, c-format, boost-format +msgid "" +"Fuzzy skin generation mode. Works only with Arachne!\n" +"Displacement: Сlassic mode when the pattern is formed by shifting the nozzle " +"sideways from the original path.\n" +"Extrusion: The mode when the pattern formed by the amount of extruded " +"plastic. This is the fast and straight algorithm without unnecessary nozzle " +"shake that gives a smooth pattern. But it is more useful for forming loose " +"walls in the entire they array.\n" +"Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the " +"walls is similar to [Displacement] Mode, but it leaves no pores between the " +"perimeters.\n" +"\n" +"Attention! The [Extrusion] and [Combined] modes works only the " +"fuzzy_skin_thickness parameter not more than the thickness of printed loop. " +"At the same time, the width of the extrusion for a particular layer should " +"also not be below a certain level. It is usually equal 15-25%% of a layer " +"height. Therefore, the maximum fuzzy skin thickness with a perimeter width " +"of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If " +"you enter a higher parameter than this, the error Flow::spacing() will " +"displayed, and the model will not be sliced. You can choose this number " +"until this error is repeated." msgstr "" +msgid "Displacement" +msgstr "" + +msgid "Extrusion" +msgstr "" + +msgid "Combined" +msgstr "合併" + +msgid "Fuzzy skin noise type" +msgstr "模糊表面紋理噪聲類型" + +msgid "" +"Noise type to use for fuzzy skin generation:\n" +"Classic: Classic uniform random noise.\n" +"Perlin: Perlin noise, which gives a more consistent texture.\n" +"Billow: Similar to perlin noise, but clumpier.\n" +"Ridged Multifractal: Ridged noise with sharp, jagged features. Creates " +"marble-like textures.\n" +"Voronoi: Divides the surface into voronoi cells, and displaces each one by a " +"random amount. Creates a patchwork texture." +msgstr "" +"用於產生模糊表面效果的噪聲類型：\n" +"經典（Classic）：標準的均勻隨機噪聲。\n" +"柏林（Perlin）：提供更平滑且一致的紋理效果。\n" +"波狀（Billow）：類似柏林噪聲，但紋理較為團塊狀。\n" +"脊狀多重分形（Ridged Multifractal）：帶有尖銳、鋸齒狀特徵的紋理，可產生類似大" +"理石的效果。\n" +"沃羅諾伊（Voronoi）：將表面分割成多個區塊，並隨機位移，形成拼貼風格的紋理。" + +msgid "Classic" +msgstr "經典" + +msgid "Perlin" +msgstr "柏林" + +msgid "Billow" +msgstr "波狀" + +msgid "Ridged Multifractal" +msgstr "脊狀多重分形" + +msgid "Voronoi" +msgstr "沃羅諾伊" + +msgid "Fuzzy skin feature size" +msgstr "模糊表面紋理尺寸" + +msgid "" +"The base size of the coherent noise features, in mm. Higher values will " +"result in larger features." +msgstr "" +"控制模糊紋理的基礎尺寸（單位：毫米）。數值越大，紋理特徵越明顯、範圍越大。" + +msgid "Fuzzy Skin Noise Octaves" +msgstr "模糊表面紋理噪聲層級" + +msgid "" +"The number of octaves of coherent noise to use. Higher values increase the " +"detail of the noise, but also increase computation time." +msgstr "" +"設定模糊紋理的噪聲層級數量。較高的值可提升紋理細節，但也會增加運算時間。" + +msgid "Fuzzy skin noise persistence" +msgstr "模糊表面紋理噪聲強度衰減係數" + +msgid "" +"The decay rate for higher octaves of the coherent noise. Lower values will " +"result in smoother noise." +msgstr "控制高層級噪聲細節的衰減率。數值越低，紋理會越平滑。" + msgid "Filter out tiny gaps" msgstr "忽略微小間隙" msgid "Layers and Perimeters" msgstr "層和牆" -msgid "Filter out gaps smaller than the threshold specified" -msgstr "忽略小於指定數值的間隙" +msgid "" +"Don't print gap fill with a length is smaller than the threshold specified " +"(in mm). This setting applies to top, bottom and solid infill and, if using " +"the classic perimeter generator, to wall gap fill." +msgstr "" +"若縫隙填充的長度小於設定的閾值（以 mm 計），則不列印該填充。此設定適用於頂" +"部、底部和實心填充，以及使用經典牆產生器時的牆體縫隙填充。" msgid "" "Speed of gap infill. Gap usually has irregular line width and should be " -"printed more slowly" -msgstr "填縫的速度。縫隙通常有不一致的線寬，應改用較慢速度列印。" +"printed more slowly." +msgstr "填縫的速度。縫隙通常有不一致的線寬，應改用較慢速度列印" msgid "Precise Z height" -msgstr "" +msgstr "Z 軸的精確高度" msgid "" -"Enable this to get precise z height of object after slicing. It will get the " +"Enable this to get precise Z height of object after slicing. It will get the " "precise object height by fine-tuning the layer heights of the last few " "layers. Note that this is an experimental parameter." msgstr "" +"啟用此選項可以在切片後確保物件的 Z 軸高度更加精確。此功能透過微調最後幾層的層" +"高來達成精確的物件高度。請注意，這是一個實驗性功能。" msgid "Arc fitting" msgstr "圓弧擬合" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting " -"tolerance is same as the resolution. \n" +"tolerance is same as the resolution.\n" "\n" -"Note: For klipper machines, this option is recomended to be disabled. " +"Note: For Klipper machines, this option is recommended to be disabled. " "Klipper does not benefit from arc commands as these are split again into " "line segments by the firmware. This results in a reduction in surface " "quality as line segments are converted to arcs by the slicer and then back " "to line segments by the firmware." msgstr "" +"啟用此選項可產生包含 G2 和 G3 弧形運動的 G-code 檔案，其擬合公差與解析度一" +"致。 \n" +"\n" +"注意：對於 Klipper 控制的機器，建議關閉此功能。Klipper 無法有效利用弧形指令，" +"因為固件會將這些弧形指令重新分割為線段。這可能導致表面品質下降，因為切片器將" +"線段轉換為弧形，然後固件又將弧形還原為線段。" msgid "Add line number" msgstr "標註行號" -#, fuzzy -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" -msgstr "打開這個設定，G-code 的每一行的開頭會增加Nx標註行號。" +msgid "" +"Enable this to add line number(Nx) at the beginning of each G-code line." +msgstr "啟用此選項可在每行 G-Code 的開頭新增行號（Nx）" msgid "Scan first layer" msgstr "首層檢查" -#, fuzzy msgid "" "Enable this to enable the camera on printer to check the quality of first " -"layer" -msgstr "打開這個設定將使用列印設備上的鏡頭用於檢查首層列印品質。" +"layer." +msgstr "打開這個設定將使用列印設備上的鏡頭用於檢查首層列印品質" msgid "Nozzle type" msgstr "噴嘴類型" msgid "" "The metallic material of nozzle. This determines the abrasive resistance of " -"nozzle, and what kind of filament can be printed" +"nozzle, and what kind of filament can be printed." msgstr "噴嘴的金屬材料。這將決定噴嘴的耐磨性，以及可列印線材的種類" msgid "Undefine" @@ -11122,6 +13322,9 @@ msgstr "硬化鋼" msgid "Stainless steel" msgstr "不鏽鋼" +msgid "Tungsten carbide" +msgstr "" + msgid "Brass" msgstr "黃銅" @@ -11136,24 +13339,23 @@ msgstr "噴嘴硬度。零值表示在切片時不檢查噴嘴硬度。" msgid "HRC" msgstr "洛氏硬度" -#, fuzzy msgid "Printer structure" msgstr "列印設備結構" -msgid "The physical arrangement and components of a printing device" +msgid "The physical arrangement and components of a printing device." msgstr "列印設備的實體佈置和組件" msgid "CoreXY" -msgstr "" +msgstr "CoreXY" msgid "I3" -msgstr "" +msgstr "I3" msgid "Hbot" -msgstr "" +msgstr "Hbot" msgid "Delta" -msgstr "" +msgstr "Delta" msgid "Best object position" msgstr "最佳物件位置" @@ -11161,40 +13363,38 @@ msgstr "最佳物件位置" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "針對列印版的形狀，範圍 [0,1] 內的最佳自動擺放位置 。" -#, fuzzy msgid "" "Enable this option if machine has auxiliary part cooling fan. G-code " "command: M106 P2 S(0-255)." msgstr "" -"如果設備有輔助部件冷卻風扇，請啟用此選項。 G-code 指令：M106 P2 S（0-255）。" +"如果設備有輔助物件冷卻風扇，請啟用此選項。 G-code 指令：M106 P2 S（0-255）。" -#, fuzzy msgid "" "Start the fan this number of seconds earlier than its target start time (you " "can use fractional seconds). It assumes infinite acceleration for this time " "estimation, and will only take into account G1 and G0 moves (arc fitting is " "unsupported).\n" -"It won't move fan comands from custom gcodes (they act as a sort of " +"It won't move fan commands from custom G-code (they act as a sort of " "'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" +"It won't move fan commands into the start G-code if the 'only custom start G-" +"code' is activated.\n" "Use 0 to deactivate." msgstr "" -"將風扇啟動指令往前移動指定時間以補償風扇的啟動時間。目前支援 G1 G0 指令\n" -"設為 0 以禁用此選項" +"在風扇目標啟動時間前提前設定的秒數啟動風扇（支持小數點）。此功能基於無限加速" +"假設進行時間估算，並僅考慮 G1 和 G0 指令的移動（不支援圓弧擬合）。\n" +"風扇指令不會從自定義 G-code 中轉移（它們被視為「屏障」）。\n" +"若啟用『僅使用自定義起始 G-code』，風扇指令將不會移動到起始 G-code 中。\n" +"將此值設為 0 可停用該功能。" -#, fuzzy msgid "Only overhangs" msgstr "僅懸空" -#, fuzzy msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "僅對懸空有效" +msgstr "此設定僅針對懸空部分的冷卻延遲進行考量。" msgid "Fan kick-start time" -msgstr "風扇" +msgstr "風扇啟動時間" -#, fuzzy msgid "" "Emit a max fan speed command for this amount of seconds before reducing to " "target speed to kick-start the cooling fan.\n" @@ -11202,26 +13402,25 @@ msgid "" "fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" -"在降低到目標速度以啟動冷卻風扇之前，持續發出最大風扇速度命令。\n" -"這對於低 PWM/功率可能不足以使風扇從停止狀態開始旋轉或使風扇加速得更快的風扇很" -"有用。\n" -"設定為 0 以停用。" +"在風扇降速至目標速度之前，先以最大風扇速度運行指定的秒數來啟動冷卻風扇。\n" +"這對於需要較高功率才能從靜止狀態啟動，或需要更快達到運行速度的風扇非常有幫" +"助。\n" +"若設置為 0，將停用此功能。\n" +"譯者補充：風扇啟動時間通常是指風扇從靜止狀態到穩定運轉所需的時間\n" +"這個設定可以確保風扇在低轉速時順利啟動，避免因功率不足而無法正常運行。" msgid "Time cost" msgstr "時間成本" -#, fuzzy -msgid "The printer cost per hour" -msgstr "列印設備每小時成本" +msgid "The printer cost per hour." +msgstr "列印設備每小時的成本" msgid "money/h" msgstr "元/小時" -#, fuzzy msgid "Support control chamber temperature" msgstr "支援控制列印設備內部溫度" -#, fuzzy msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" @@ -11232,7 +13431,6 @@ msgstr "" msgid "Support air filtration" msgstr "支援空氣過濾" -#, fuzzy msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" @@ -11243,31 +13441,29 @@ msgstr "" msgid "G-code flavor" msgstr "G-code 風格" -#, fuzzy -msgid "What kind of gcode the printer is compatible with" +msgid "What kind of G-code the printer is compatible with." msgstr "列印設備相容的 G-code 樣式" msgid "Klipper" -msgstr "" +msgstr "Klipper" msgid "Pellet Modded Printer" -msgstr "" +msgstr "顆粒改裝列印機" -msgid "Enable this option if your printer uses pellets instead of filaments" -msgstr "" +msgid "Enable this option if your printer uses pellets instead of filaments." +msgstr "若您的列印機使用塑料顆粒而非傳統線材，請啟用此選項" msgid "Support multi bed types" -msgstr "" +msgstr "支援多種熱床類型" -msgid "Enable this option if you want to use multiple bed types" -msgstr "" +msgid "Enable this option if you want to use multiple bed types." +msgstr "若您需要切換使用不同的列印床類型，請啟用此選項" msgid "Label objects" msgstr "標註物件" -#, fuzzy msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " +"Enable this to add comments into the G-code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." @@ -11279,7 +13475,7 @@ msgstr "" msgid "Exclude objects" msgstr "物件排除" -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" +msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "開啟此選項以支援物件排除" msgid "Verbose G-code" @@ -11290,7 +13486,7 @@ msgid "" "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" -"啟用此選項可取得帶註釋的 G-code，其中每一行均由描述性文字進行解釋。 如果您從 " +"啟用此選項可取得帶註釋的 G-code，其中每一行均由描述性文字進行解釋。如果您從 " "SD 卡列印，檔案的額外容量可能會導致韌體速度變慢。" msgid "Infill combination" @@ -11300,10 +13496,140 @@ msgid "" "Automatically Combine sparse infill of several layers to print together to " "reduce time. Wall is still printed with original layer height." msgstr "" -"自動合併若干層稀疏填充一起列印以可縮短時間。內外牆依然保持原始層高列印。" +"自動將多層稀疏填充合併列印，以縮短列印時間。同時，周邊仍保持原層高列印。" + +msgid "Infill shift step" +msgstr "" + +msgid "" +"This parameter adds a slight displacement to each layer of infill to create " +"a cross texture." +msgstr "" + +msgid "Sparse infill rotation template" +msgstr "" + +msgid "" +"Rotate the sparse infill direction per layer using a template of angles. " +"Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in " +"order by layer and repeat when the list ends. Advanced syntax is supported: " +"'+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the " +"Wiki for details. When a template is set, the standard infill direction " +"setting is ignored. Note: some infill patterns (e.g., Gyroid) control " +"rotation themselves; use with care." +msgstr "" + +msgid "°" +msgstr "°" + +msgid "Solid infill rotation template" +msgstr "" + +msgid "" +"This parameter adds a rotation of solid infill direction to each layer " +"according to the specified template. The template is a comma-separated list " +"of angles in degrees, e.g. '0,90'. The first angle is applied to the first " +"layer, the second angle to the second layer, and so on. If there are more " +"layers than angles, the angles will be repeated. Note that not all solid " +"infill patterns support rotation." +msgstr "" + +msgid "Skeleton infill density" +msgstr "" + +msgid "" +"The remaining part of the model contour after removing a certain depth from " +"the surface is called the skeleton. This parameter is used to adjust the " +"density of this section. When two regions have the same sparse infill " +"settings but different skeleton densities, their skeleton areas will develop " +"overlapping sections. Default is as same as infill density." +msgstr "" + +msgid "Skin infill density" +msgstr "" + +msgid "" +"The portion of the model's outer surface within a certain depth range is " +"called the skin. This parameter is used to adjust the density of this " +"section. When two regions have the same sparse infill settings but different " +"skin densities, this area will not be split into two separate regions. " +"Default is as same as infill density." +msgstr "" + +msgid "Skin infill depth" +msgstr "" + +msgid "The parameter sets the depth of skin." +msgstr "" + +msgid "Infill lock depth" +msgstr "" + +msgid "The parameter sets the overlapping depth between the interior and skin." +msgstr "" + +msgid "Skin line width" +msgstr "" + +msgid "Adjust the line width of the selected skin paths." +msgstr "" + +msgid "Skeleton line width" +msgstr "" + +msgid "Adjust the line width of the selected skeleton paths." +msgstr "" + +msgid "Symmetric infill Y axis" +msgstr "" + +msgid "" +"If the model has two parts that are symmetric about the Y axis, and you want " +"these parts to have symmetric textures, please click this option on one of " +"the parts." +msgstr "" + +msgid "Infill combination - Max layer height" +msgstr "合併填充 - 最大層高" + +msgid "" +"Maximum layer height for the combined sparse infill.\n" +"\n" +"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in " +"print time) or a value of ~80% to maximize sparse infill strength.\n" +"\n" +"The number of layers over which infill is combined is derived by dividing " +"this value with the layer height and rounded down to the nearest decimal.\n" +"\n" +"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values " +"(eg 80%). This value must not be larger than the nozzle diameter." +msgstr "" +"設定稀疏填充合併列印最大層高。\n" +"\n" +"您可以將其設為 0 或 100% 來使用噴嘴直徑（以最大程度縮短列印時間），或者設定為" +"大約 80% 來增強稀疏填充的強度。結合的層數會根據此值與層高的比值計算，並向下取" +"整到最接近的位數。\n" +"\n" +"可以使用絕對值（例如 0.32mm，對應 0.4mm 的噴嘴）或百分比（例如 80%）。注意，" +"此值不能超過噴嘴的直徑。" + +msgid "Enable clumping detection" +msgstr "" + +msgid "Clumping detection layers" +msgstr "" + +msgid "Clumping detection layers." +msgstr "" + +msgid "Probing exclude area of clumping" +msgstr "" + +msgid "Probing exclude area of clumping." +msgstr "" msgid "Filament to print internal sparse infill." -msgstr "列印內部稀疏填充的線材" +msgstr "列印內部稀疏填充的線材。" msgid "" "Line width of internal sparse infill. If expressed as a %, it will be " @@ -11320,29 +13646,41 @@ msgid "" "value to ~10-15% to minimize potential over extrusion and accumulation of " "material resulting in rough top surfaces." msgstr "" +"為了增強填充與周邊的結合，填充區域會略微擴大，與周邊產生重疊。此百分比值是基" +"於稀疏填充的線寬來計算的。建議將該值設置在 10-15% 左右，以減少過擠出或材料堆" +"積的可能性從而避免列印出粗糙的頂部表面。" msgid "Top/Bottom solid infill/wall overlap" -msgstr "" +msgstr "頂部/底部實心填充部分和周邊重疊區域設定" #, no-c-format, no-boost-format msgid "" "Top solid infill area is enlarged slightly to overlap with wall for better " "bonding and to minimize the appearance of pinholes where the top infill " -"meets the walls. A value of 25-30% is a good starting point, minimising the " +"meets the walls. A value of 25-30% is a good starting point, minimizing the " "appearance of pinholes. The percentage value is relative to line width of " -"sparse infill" +"sparse infill." msgstr "" +"頂部實心填充的區域會略微擴大，與周邊部分重疊，以增強結合效果並減少填充與周邊" +"接合處出現針孔的可能性。建議從 25-30% 的設定值開始，這通常能有效減少針孔現" +"象。此百分比值是基於稀疏填充的線寬來計算的" -msgid "Speed of internal sparse infill" +msgid "Speed of internal sparse infill." msgstr "內部稀疏填充的列印速度" +msgid "Inherits profile" +msgstr "繼承設定檔" + +msgid "Name of parent profile." +msgstr "上層設定檔名稱" + msgid "Interface shells" msgstr "接觸面外殼" msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " -"soluble support material" +"soluble support material." msgstr "" "強制在相鄰材料/體積之間產生實體殼。 適用於使用半透明材料或手動可溶支撐材料的" "多擠出機列印" @@ -11351,69 +13689,85 @@ msgid "Maximum width of a segmented region" msgstr "分隔區域的最大寬度" msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "分隔區域的最大寬度。零表示禁用此功能。" +msgstr "分隔區域的最大寬度。零表示停用此功能。" msgid "Interlocking depth of a segmented region" -msgstr "" +msgstr "分隔區域的互鎖深度" -msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgid "" +"Interlocking depth of a segmented region. It will be ignored if " +"\"mmu_segmented_region_max_width\" is zero or if " +"\"mmu_segmented_region_interlocking_depth\" is bigger than " +"\"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" +"設定分隔區域的互鎖深度。如果「mmu_segmented_region_max_width」設定為 0，或者" +"「mmu_segmented_region_interlocking_depth」的值大於" +"「mmu_segmented_region_max_width」，此功能將被忽略。將此值設為 0 可完全關閉該" +"功能。" msgid "Use beam interlocking" -msgstr "" +msgstr "使用梁式互鎖" msgid "" "Generate interlocking beam structure at the locations where different " "filaments touch. This improves the adhesion between filaments, especially " "models printed in different materials." msgstr "" +"在不同材料的耗材接觸點產生梁式互鎖結構，增強耗材之間的附著力，特別適用於不同" +"材料列印的模型。\n" +"譯者補充：此設定通常用於提升結構穩定性，透過梁式設計讓不同部分更緊密地連接在" +"一起，常見於模組化或多材料列印中。" msgid "Interlocking beam width" -msgstr "" +msgstr "梁式互鎖寬度" msgid "The width of the interlocking structure beams." -msgstr "" +msgstr "梁式互鎖結構寬度。" msgid "Interlocking direction" -msgstr "" +msgstr "梁式互鎖方向" msgid "Orientation of interlock beams." -msgstr "" +msgstr "梁式互鎖結構的排列方向。" msgid "Interlocking beam layers" -msgstr "" +msgstr "梁式互鎖層數" msgid "" "The height of the beams of the interlocking structure, measured in number of " "layers. Less layers is stronger, but more prone to defects." -msgstr "" +msgstr "梁式互鎖的交錯高度，以層數計算。層數越少，結構越強，但更容易出現缺陷。" msgid "Interlocking depth" -msgstr "" +msgstr "梁式互鎖深度" msgid "" "The distance from the boundary between filaments to generate interlocking " "structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" +"互鎖結構與邊界之間的距離，以單元數做計算。若單元數過少，可能會導致附著力不" +"足。" msgid "Interlocking boundary avoidance" -msgstr "" +msgstr "梁式互鎖的邊界避讓" msgid "" "The distance from the outside of a model where interlocking structures will " "not be generated, measured in cells." msgstr "" +"設定模型外部距離範圍內不產生互鎖結構，此距離以單元數做計算\n" +"譯者補充：此設定用於確保互鎖結構不干擾模型的外部區域，特別適用於需要精細外觀" +"或保護特定結構的列印需求。" msgid "Ironing Type" msgstr "熨燙類型" -#, fuzzy msgid "" "Ironing is using small flow to print on same height of surface again to make " "flat surface more smooth. This setting controls which layer being ironed" msgstr "" -"熨燙指的是使用小流量在表面的同高度列印，進而是的平面更加光滑。這個功能用於設" -"定哪些層進行熨燙。" +"熨燙是指使用小流量在表面相同高度再次列印，以使平面更加光滑。此設定控制哪些層" +"進行熨燙" msgid "No ironing" msgstr "不熨燙" @@ -11430,7 +13784,7 @@ msgstr "所有實心層" msgid "Ironing Pattern" msgstr "熨燙模式" -msgid "The pattern that will be used when ironing" +msgid "The pattern that will be used when ironing." msgstr "熨燙時將使用的圖案" msgid "Ironing flow" @@ -11438,196 +13792,235 @@ msgstr "熨燙流量" msgid "" "The amount of material to extrude during ironing. Relative to flow of normal " -"layer height. Too high value results in overextrusion on the surface" -msgstr "熨燙時相對正常層高流量的材料量。過高的數值將會導致表面材料過擠出。" +"layer height. Too high value results in overextrusion on the surface." +msgstr "熨燙時相對正常層高流量的材料量。過高的數值將會導致表面材料過擠出" msgid "Ironing line spacing" msgstr "熨燙間距" -msgid "The distance between the lines of ironing" +msgid "The distance between the lines of ironing." msgstr "熨燙走線的間距" +msgid "Ironing inset" +msgstr "燙平內縮距離" + +msgid "" +"The distance to keep from the edges. A value of 0 sets this to half of the " +"nozzle diameter." +msgstr "與邊緣保持的距離。設定為 0 時，距離將自動設為噴嘴直徑的一半" + msgid "Ironing speed" msgstr "熨燙速度" -msgid "Print speed of ironing lines" +msgid "Print speed of ironing lines." msgstr "熨燙的列印速度" -msgid "Ironing angle" -msgstr "熨燙角度" - -msgid "" -"The angle ironing is done at. A negative number disables this function and " -"uses the default method." +msgid "Ironing angle offset" msgstr "" -msgid "This gcode part is inserted at every layer change after lift z" -msgstr "在每次換層抬升Z高度之後插入這段 G-code。" +msgid "The angle of ironing lines offset from the top surface." +msgstr "" + +msgid "Fixed ironing angle" +msgstr "" + +msgid "Use a fixed absolute angle for ironing." +msgstr "" + +msgid "This G-code is inserted at every layer change after the Z lift." +msgstr "在每次換層抬升Z高度之後插入這段 G-code" + +msgid "Clumping detection G-code" +msgstr "" msgid "Supports silent mode" msgstr "支援靜音模式" -#, fuzzy msgid "" "Whether the machine supports silent mode in which machine use lower " -"acceleration to print" -msgstr "設備是否支援使用低加速度列印的靜音模式。" +"acceleration to print." +msgstr "設備是否支援使用低加速度列印的靜音模式" msgid "Emit limits to G-code" -msgstr "" +msgstr "將限制參數輸出至 G-code" -#, fuzzy msgid "Machine limits" msgstr "設備限制" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." +"This option will be ignored if the G-code flavor is set to Klipper." msgstr "" +"啟用後，設備的限制參數將被寫入 G-code 檔案中。若 G-code 格式為 Klipper，該選" +"項將無效。" msgid "" -"This G-code will be used as a code for the pause print. User can insert " -"pause G-code in gcode viewer" -msgstr "該 G-code 用於暫停列印。您可以在 gcode 預覽中插入暫停 G-code" +"This G-code will be used as a code for the pause print. Users can insert " +"pause G-code in the G-code viewer." +msgstr "" +"這段 G-code 用於暫停列印操作。使用者可以在 G-code 預覽中手動插入暫停指令" -msgid "This G-code will be used as a custom code" -msgstr "該 G-code 是訂製化指令" +msgid "This G-code will be used as a custom code." +msgstr "這段 G-code 是訂製化指令" msgid "Small area flow compensation (beta)" -msgstr "" +msgstr "小面積流量補償（Beta）" -msgid "Enable flow compensation for small infill areas" -msgstr "" +msgid "Enable flow compensation for small infill areas." +msgstr "啟用小面積填充區域的流量補償功能" msgid "Flow Compensation Model" -msgstr "" +msgstr "流量補償模型" msgid "" "Flow Compensation Model, used to adjust the flow for small infill areas. The " "model is expressed as a comma separated pair of values for extrusion length " -"and flow correction factors, one per line, in the following format: " -"\"1.234,5.678\"" +"and flow correction factor. Each pair is on a separate line, followed by a " +"semicolon, in the following format: \"1.234, 5.678;\"" msgstr "" msgid "Maximum speed X" -msgstr "X最大速度" +msgstr "X 最大速度" msgid "Maximum speed Y" -msgstr "Y最大速度" +msgstr "Y 最大速度" msgid "Maximum speed Z" -msgstr "Z最大速度" +msgstr "Z 最大速度" msgid "Maximum speed E" -msgstr "E最大速度" +msgstr "E 最大速度" msgid "Maximum X speed" -msgstr "X最大速度" +msgstr "X 最大速度" msgid "Maximum Y speed" -msgstr "Y最大速度" +msgstr "Y 最大速度" msgid "Maximum Z speed" -msgstr "Z最大速度" +msgstr "Z 最大速度" msgid "Maximum E speed" -msgstr "E最大速度" +msgstr "E 最大速度" msgid "Maximum acceleration X" -msgstr "X最大加速度" +msgstr "X 最大加速度" msgid "Maximum acceleration Y" -msgstr "Y最大加速度" +msgstr "Y 最大加速度" msgid "Maximum acceleration Z" -msgstr "Z最大加速度" +msgstr "Z 最大加速度" msgid "Maximum acceleration E" -msgstr "E最大加速度" +msgstr "E 最大加速度" msgid "Maximum acceleration of the X axis" -msgstr "X軸的最大加速度" +msgstr "X 軸的最大加速度" msgid "Maximum acceleration of the Y axis" -msgstr "Y軸的最大加速度" +msgstr "Y 軸的最大加速度" msgid "Maximum acceleration of the Z axis" -msgstr "Z軸的最大加速度" +msgstr "Z 軸的最大加速度" msgid "Maximum acceleration of the E axis" -msgstr "E軸的最大加速度" +msgstr "E 軸的最大加速度" msgid "Maximum jerk X" -msgstr "X最大抖動" +msgstr "X 最大抖動" msgid "Maximum jerk Y" -msgstr "Y最大抖動" +msgstr "Y 最大抖動" msgid "Maximum jerk Z" -msgstr "Z最大抖動" +msgstr "Z 最大抖動" msgid "Maximum jerk E" -msgstr "E最大抖動" +msgstr "E 最大抖動" msgid "Maximum jerk of the X axis" -msgstr "X軸最大抖動" +msgstr "X 軸最大抖動" msgid "Maximum jerk of the Y axis" -msgstr "Y軸最大抖動" +msgstr "Y 軸最大抖動" msgid "Maximum jerk of the Z axis" -msgstr "Z軸最大抖動" +msgstr "Z 軸最大抖動" msgid "Maximum jerk of the E axis" -msgstr "E軸最大抖動" +msgstr "E 軸最大抖動" + +msgid "Maximum Junction Deviation" +msgstr "" + +msgid "" +"Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin " +"Firmware\n" +"If your Marlin 2 printer uses Classic Jerk set this value to 0.)" +msgstr "" msgid "Minimum speed for extruding" msgstr "最小擠出速度" -#, fuzzy msgid "Minimum speed for extruding (M205 S)" msgstr "最小擠出速度（M205 S）" msgid "Minimum travel speed" msgstr "最小空駛速度" -#, fuzzy msgid "Minimum travel speed (M205 T)" msgstr "最小空駛速度（M205 T）" msgid "Maximum acceleration for extruding" msgstr "擠出最大加速度" -#, fuzzy msgid "Maximum acceleration for extruding (M204 P)" msgstr "擠出時的最大加速度（M204 P）" msgid "Maximum acceleration for retracting" msgstr "回抽最大加速度" -#, fuzzy msgid "Maximum acceleration for retracting (M204 R)" msgstr "回抽最大加速度（M204 R）" msgid "Maximum acceleration for travel" msgstr "空駛最大加速度" -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" +msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "最大行駛加速度（M204 T），僅適用於 Marlin 2" -msgid "" -"Part cooling fan speed may be increased when auto cooling is enabled. This " -"is the maximum speed limitation of part cooling fan" +msgid "Resonance avoidance" +msgstr "" + +msgid "" +"By reducing the speed of the outer wall to avoid the resonance zone of the " +"printer, ringing on the surface of the model are avoided.\n" +"Please turn this option off when testing ringing." +msgstr "" + +msgid "Min" +msgstr "最小" + +msgid "Minimum speed of resonance avoidance." msgstr "" -"啟用自動冷卻時，可能會提高部件冷卻風扇的轉速。這是部件冷卻風扇的最大速度限制" msgid "Max" msgstr "最大" +msgid "Maximum speed of resonance avoidance." +msgstr "" + msgid "" -"The largest printable layer height for extruder. Used tp limits the maximum " -"layer hight when enable adaptive layer height" -msgstr "擠出頭最大可列印的層高。用於限制開啟自適應層高時的最大層高。" +"Part cooling fan speed may be increased when auto cooling is enabled. This " +"is the maximum speed for the part cooling fan." +msgstr "" +"啟用自動冷卻時，可能會提高物件冷卻風扇的轉速。這是物件冷卻風扇的最大速度限制" + +msgid "" +"The highest printable layer height for the extruder. Used to limit the " +"maximum layer height when enable adaptive layer height." +msgstr "" msgid "Extrusion rate smoothing" msgstr "平滑擠出率" @@ -11639,67 +14032,67 @@ msgid "" "extrusion to a lower flow (lower speed/smaller width) extrusion and vice " "versa.\n" "\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec " +"It defines the maximum rate by which the extruded volumetric flow in mm³/s " "can change over time. Higher values mean higher extrusion rate changes are " "allowed, resulting in faster speed transitions.\n" "\n" -"A value of 0 disables the feature. \n" +"A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or " "Voron) this value is usually not needed. However it can provide some " "marginal benefit in certain cases where feature speeds vary greatly. For " "example, when there are aggressive slowdowns due to overhangs. In these " -"cases a high value of around 300-350mm3/s2 is recommended as this allows for " -"just enough smoothing to assist pressure advance achieve a smoother flow " +"cases a high value of around 300-350 mm³/s² is recommended as this allows " +"for just enough smoothing to assist pressure advance achieve a smoother flow " "transition.\n" "\n" "For slower printers without pressure advance, the value should be set much " -"lower. A value of 10-15mm3/s2 is a good starting point for direct drive " -"extruders and 5-10mm3/s2 for Bowden style. \n" +"lower. A value of 10-15 mm³/s² is a good starting point for direct drive " +"extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" -"此參數是列印設備從列印高流量（高速/較大寬度）擠出轉換到較低流量（較低速度/較" -"小寬度）擠出時，用於突然變化擠出速率的平滑，反之亦然。\n" -"它定義了擠出體積流量（以 mm3/秒為單位）隨時間變化的最大速率。數值越高意味著允" -"許更高的擠出速率變化，從而實現更快的速度轉換。\n" -"\n" -"值為 0 會停用該功能。\n" -"\n" -"對於高速、高流量的機型（如 Bambu lab 或 Voron），通常不需要此值。但是，在某些" -"功能速度差異很大的情況下，它可以提供一些邊際效益。 例如，當懸空而出現嚴重的減" -"速時。 在這些情況下，建議使用大約 300－350　mm3/s2，因為這樣剛好允許足夠的平" -"滑，以幫助壓力提前實現更平滑的流量過渡。\n" -"\n" -"對於速度較慢且沒有壓力提前的機種，該值應設定的非常低。對於近程擠出機來說\n" -"10－15 mm3/s2 是一個相對好的起點，而對於遠程擠出機來說是　5－10 mm3/s2。\n" -"此功能在 Prusa 切片機中稱為壓力均衡器。\n" -"\n" -"注意：此參數會停用圓弧擬合。" - -msgid "mm³/s²" -msgstr "mm³/s²" +"這個參數可以讓列印設備在高流量（例如高速度或較大線寬）和低流量（例如低速度或" +"較小線寬）的切換能能夠平穩過渡，避免擠出量改變得太突然而影響列印效果。" msgid "Smoothing segment length" msgstr "平滑段長度" msgid "" "A lower value results in smoother extrusion rate transitions. However, this " -"results in a significantly larger gcode file and more instructions for the " -"printer to process. \n" +"results in a significantly larger G-code file and more instructions for the " +"printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, " -"increase this value to reduce the number of adjustments made\n" +"increase this value to reduce the number of adjustments made.\n" "\n" -"Allowed values: 1-5" +"Allowed values: 0.5-5" msgstr "" +"較低的設定值能讓擠出速率變化更平滑，但會導致 G-code 檔案變大，並增加印表機的" +"運算負擔。\n" +"\n" +"預設值為 3，適用於大多數情況。如果您的印表機在列印時出現停頓或卡頓，請提高此" +"數值，以減少擠出速率的頻繁調整。\n" +"\n" +"可設定範圍：0.5-5" -msgid "Minimum speed for part cooling fan" -msgstr "部件冷卻風扇的最小轉速" +msgid "Apply only on external features" +msgstr "僅套用於外部結構" + +msgid "" +"Applies extrusion rate smoothing only on external perimeters and overhangs. " +"This can help reduce artefacts due to sharp speed transitions on externally " +"visible overhangs without impacting the print speed of features that will " +"not be visible to the user." +msgstr "" +"僅在外部輪廓與懸垂部分套用擠出速率平滑處理。這可減少外部可見區域因速度變化過" +"快而產生的瑕疵，而不影響內部結構的列印速度。" + +msgid "Minimum speed for part cooling fan." +msgstr "物件冷卻風扇的最小轉速" -#, fuzzy msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " "during printing except the first several layers which is defined by no " @@ -11711,27 +14104,23 @@ msgstr "" "層除外\n" "請在列印設備設定中啟用輔助風扇才能使用此功能。 G碼指令：M106 P2 S（0-255）" -msgid "Min" -msgstr "最小" - msgid "" -"The lowest printable layer height for extruder. Used tp limits the minimum " -"layer hight when enable adaptive layer height" -msgstr "擠出頭最小可列印的層高。用於限制開啟自適應層高時的最小層高。" +"The lowest printable layer height for the extruder. Used to limit the " +"minimum layer height when enable adaptive layer height." +msgstr "" msgid "Min print speed" msgstr "最小列印速度" msgid "" -"The minimum printing speed that the printer will slow down to to attempt to " -"maintain the minimum layer time above, when slow down for better layer " -"cooling is enabled." +"The minimum print speed to which the printer slows down to maintain the " +"minimum layer time defined above when the slowdown for better layer cooling " +"is enabled." msgstr "" +"當啟用了為改善層冷卻而減速的功能時，這個參數設定列印設備能減速到的最低列印速" +"度，以確保達到上面設定的最短層時間。" -msgid "Nozzle diameter" -msgstr "噴嘴直徑" - -msgid "Diameter of nozzle" +msgid "The diameter of nozzle." msgstr "噴嘴直徑" msgid "Configuration notes" @@ -11745,17 +14134,16 @@ msgstr "您可以在這裡放置您的個人備註。 該文字將會加入 G msgid "Host Type" msgstr "主機類型" -#, fuzzy msgid "" "Snapmaker Orca can upload G-code files to a printer host. This field must " "contain the kind of the host." -msgstr "切片軟體可以將 G-code 檔案上傳到列印設備。此欄位必須包含設備類型。" +msgstr "Snapmaker Orca可以將 G-code 檔案上傳到列印設備。此欄位必須包含設備類型。" msgid "Nozzle volume" msgstr "噴嘴內腔體積" -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "從切刀位置到噴嘴尖端的內腔體積" +msgid "Volume of nozzle between the cutter and the end of nozzle." +msgstr "噴嘴內從刀具到末端之間的體積" msgid "Cooling tube position" msgstr "喉管位置" @@ -11795,7 +14183,7 @@ msgstr "額外進料距離" msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " +"positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" "當設定為零時，線材的進料移動與退料移動的距離相同。如果為正，進料比退料長。如" @@ -11810,89 +14198,97 @@ msgstr "從切割區域到垃圾桶的起始和結束點。" msgid "Reduce infill retraction" msgstr "減小填充回抽" -#, fuzzy msgid "" "Don't retract when the travel is in infill area absolutely. That means the " "oozing can't been seen. This can reduce times of retraction for complex " -"model and save printing time, but make slicing and G-code generating slower" +"model and save printing time, but make slicing and G-code generating slower." msgstr "" "當空駛完全在填充區域內時不觸發回抽。這意味著即使漏料也是不可見的。對於複雜模" "型，該設定能夠減少回抽次數以及列印時長，但是會造成 G-code 產生變慢" +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing." +msgstr "這個選項會降低未使用噴頭的溫度，以防止材料滲出。" + msgid "Filename format" msgstr "檔案名稱格式" -msgid "User can self-define the project file name when export" -msgstr "使用者可以自訂匯出項目檔案的名稱。" +msgid "Users can define the project file name when exporting." +msgstr "使用者可以自訂匯出項目檔案的名稱" -#, fuzzy msgid "Make overhangs printable" -msgstr "懸空可列印" +msgstr "修改懸空成可列印" -#, fuzzy msgid "Modify the geometry to print overhangs without support material." msgstr "修改幾何形狀使得懸空部分無需支撐材料或者橋接列印。" -#, fuzzy msgid "Make overhangs printable - Maximum angle" -msgstr "懸空可列印的最大角度" +msgstr "懸空可列印修改的最大角度" msgid "" "Maximum angle of overhangs to allow after making more steep overhangs " "printable.90° will not change the model at all and allow any overhang, while " "0 will replace all overhangs with conical material." msgstr "" -"開啟使懸空可列印後，允許的懸空最大角度。90° 將完全不改變模型並允許任何懸空，" -"而0° 將用圓錐形材料替換所有懸空部分。" +"開啟使懸空可列印後，允許的懸空最大角度。 90° 將完全不改變模型並允許任何懸空，" +"而 0° 將用圓錐形材料替換所有懸空部分。" msgid "Make overhangs printable - Hole area" msgstr "最大孔洞面積" msgid "" "Maximum area of a hole in the base of the model before it's filled by " -"conical material.A value of 0 will fill all the holes in the model base." +"conical material. A value of 0 will fill all the holes in the model base." msgstr "" "模型底部的孔洞在被圓錐形材料填充前所允許的最大面積。值為 0 將填充模型底部的所" "有孔洞。" -msgid "mm²" -msgstr "mm²" - msgid "Detect overhang wall" -msgstr "識別懸空外牆" +msgstr "檢測懸空外牆" #, c-format, boost-format msgid "" "Detect the overhang percentage relative to line width and use different " "speed to print. For 100%% overhang, bridge speed is used." msgstr "" -"偵測懸空相對於線寬的百分比，並應用不同的速度列印。100%% 的懸空將使用橋接速" +"偵測懸空相對於線寬的百分比，並套用不同的速度列印。100%% 的懸空將使用橋接速" "度。" +msgid "Filament to print walls." +msgstr "用於列印牆體的線材" + msgid "" "Line width of inner wall. If expressed as a %, it will be computed over the " "nozzle diameter." msgstr "內牆的線寬。如果以 % 表示，它將以噴嘴直徑為基準來計算。" -msgid "Speed of inner wall" +msgid "Speed of inner wall." msgstr "內圈牆列印速度" -msgid "Number of walls of every layer" +msgid "Number of walls of every layer." msgstr "每一層的外牆" msgid "Alternate extra wall" -msgstr "" +msgstr "交錯額外牆壁" msgid "" "This setting adds an extra wall to every other layer. This way the infill " -"gets wedged vertically between the walls, resulting in stronger prints. \n" +"gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option " -"needs to be disabled. \n" +"needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there " "is limited infill to anchor the extra perimeters to." msgstr "" +"此設定在每隔一層新增一個額外的牆壁。這樣填充會垂直嵌入牆壁之間，從而增強列印" +"的強度。\n" +"\n" +"啟用此選項時，需要停用『確保垂直外殼厚度』選項。\n" +"\n" +"不建議將此選項與『閃電填充』一起使用，因為填充有限，無法為額外的外牆提供穩固" +"的支撐。" msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -11901,136 +14297,156 @@ msgid "" "argument, and they can access the Snapmaker Orca config settings by reading " "environment variables." msgstr "" -"如果您想透過自訂腳本處理輸出的 G-code，只需在此處列出它們的絕對路徑即可。 用" -"分號分隔多個腳本。 腳本將傳遞 G-code 檔案的絕對路徑作為第一個參數，並且它們可" -"以透過讀取環境變數來讀取 Snapmaker Orca 設定。" +"如果您想透過自訂腳本處理輸出的 G-code，只需在此處列出它們的絕對路徑即可。用分" +"號分隔多個腳本。腳本將傳遞 G-code 檔案的絕對路徑作為第一個參數，並且它們可以" +"透過讀取環境變數來讀取 Snapmaker Orca 設定。" + +msgid "Printer type" +msgstr "列印設備類型" + +msgid "Type of the printer." +msgstr "列印設備類型" msgid "Printer notes" msgstr "列印設備備註" msgid "You can put your notes regarding the printer here." -msgstr "可以將列印設備的備註填寫在此處" +msgstr "可以將列印設備的備註填寫在此處。" + +msgid "Printer variant" +msgstr "列印機型號" msgid "Raft contact Z distance" -msgstr "筏層Z間距" +msgstr "筏層 Z 間距" -msgid "Z gap between object and raft. Ignored for soluble interface" +msgid "Z gap between object and raft. Ignored for soluble interface." msgstr "模型和筏層之間的Z間隙" msgid "Raft expansion" msgstr "筏層擴展" -msgid "Expand all raft layers in XY plane" +msgid "Expand all raft layers in XY plane." msgstr "在 XY 平面擴展所有筏層" msgid "Initial layer density" msgstr "首層密度" -msgid "Density of the first raft or support layer" +msgid "Density of the first raft or support layer." msgstr "筏和支撐的首層密度" msgid "Initial layer expansion" msgstr "首層擴展" -msgid "Expand the first raft or support layer to improve bed plate adhesion" -msgstr "擴展筏和支撐的首層可以改善和熱床的黏附。" +msgid "Expand the first raft or support layer to improve bed plate adhesion." +msgstr "擴展筏和支撐的首層可以改善和熱床的黏附" msgid "Raft layers" msgstr "筏層" msgid "" "Object will be raised by this number of support layers. Use this function to " -"avoid wrapping when print ABS" +"avoid warping when printing ABS." msgstr "" -"模型會在相應層數的支撐上抬高進行列印。使用該功能通常用於列印 ABS 時翹曲。" +"模型會在相應層數的支撐上抬高進行列印。使用該功能通常用於列印 ABS 時翹曲" msgid "" -"G-code path is genereated after simplifing the contour of model to avoid too " -"much points and gcode lines in gcode file. Smaller value means higher " -"resolution and more time to slice" +"The G-code path is generated after simplifying the contour of models to " +"avoid too many points and G-code lines. Smaller value means higher " +"resolution and more time to slice." msgstr "" "為了避免 G-code 檔案中過密集的點和走線，G-code走線通常是在簡化模型的外輪廓之" -"後產生。越小的數值代表更高的解析度，同時需要更長的切片時間。" +"後產生。越小的數值代表更高的解析度，同時需要更長的切片時間" msgid "Travel distance threshold" msgstr "空駛距離臨界值" msgid "" "Only trigger retraction when the travel distance is longer than this " -"threshold" -msgstr "只在空駛距離大於該數值時觸發回抽。" +"threshold." +msgstr "只在空駛距離大於該數值時觸發回抽" msgid "Retract amount before wipe" msgstr "擦拭前的回抽量" msgid "" -"The length of fast retraction before wipe, relative to retraction length" -msgstr "擦拭之前的回抽長度，用總回抽長度的百分比表示。" +"The length of fast retraction before wipe, relative to retraction length." +msgstr "擦拭之前的回抽長度，用總回抽長度的百分比表示" msgid "Retract when change layer" msgstr "換層時回抽" -msgid "Force a retraction when changes layer" -msgstr "強制在換層時回抽。" +msgid "Force a retraction when changes layer." +msgstr "強制在換層時回抽" msgid "Retraction Length" msgstr "回抽長度" -#, fuzzy msgid "" "Some amount of material in extruder is pulled back to avoid ooze during long " -"travel. Set zero to disable retraction" +"travel. Set zero to disable retraction." msgstr "" -"擠出機中的一些材料會被拉回特定長度，避免空駛較長時軟化的線材滲出。設定為 0 表" -"示關閉回抽。" -msgid "Long retraction when cut(experimental)" -msgstr "" +msgid "Long retraction when cut (beta)" +msgstr "切斷時的長回抽（實驗性功能）" msgid "" -"Experimental feature.Retracting and cutting off the filament at a longer " -"distance during changes to minimize purge.While this reduces flush " +"Experimental feature: Retracting and cutting off the filament at a longer " +"distance during changes to minimize purge. While this reduces flush " "significantly, it may also raise the risk of nozzle clogs or other printing " "problems." msgstr "" +"實驗性功能。在線材切換時，通過更長距離的回抽和切斷操作來減少沖洗量。雖然這能" +"大幅降低沖洗需求，但可能會提高噴嘴堵塞或其他列印問題的風險。" msgid "Retraction distance when cut" -msgstr "" +msgstr "切斷時的回抽距離" msgid "" -"Experimental feature.Retraction length before cutting off during filament " -"change" +"Experimental feature: Retraction length before cutting off during filament " +"change." +msgstr "實驗性功能。線材切換時切斷前的回抽距離" + +msgid "Long retraction when extruder change" msgstr "" -msgid "Z hop when retract" -msgstr "回抽時抬升Z" +msgid "Retraction distance when extruder change" +msgstr "" + +msgid "Z-hop height" +msgstr "Z 抬升高度" msgid "" "Whenever the retraction is done, the nozzle is lifted a little to create " "clearance between nozzle and the print. It prevents nozzle from hitting the " -"print when travel move. Using spiral line to lift z can prevent stringing" +"print when travel move. Using spiral lines to lift Z can prevent stringing." msgstr "" "回抽完成之後，噴嘴輕微抬升，和列印物件之間產生一定間隙。這能夠避免空駛時噴嘴" -"和列印物件剮蹭和碰撞。使用螺旋線抬升z能夠減少拉絲。" +"和列印物件剮蹭和碰撞。使用螺旋線抬升z能夠減少拉絲" -msgid "Z hop lower boundary" -msgstr "" +msgid "Z-hop lower boundary" +msgstr "Z 抬升下邊界" msgid "" -"Z hop will only come into effect when Z is above this value and is below the " -"parameter: \"Z hop upper boundary\"" +"Z-hop will only come into effect when Z is above this value and is below the " +"parameter: \"Z-hop upper boundary\"." msgstr "" +"只有當 Z 值高於此設定值且低於「Z 抬升上邊界」參數時，Z 抬升功能才會啟用。" -msgid "Z hop upper boundary" -msgstr "" +msgid "Z-hop upper boundary" +msgstr "Z 抬升上邊界" msgid "" -"If this value is positive, Z hop will only come into effect when Z is above " -"the parameter: \"Z hop lower boundary\" and is below this value" +"If this value is positive, Z-hop will only come into effect when Z is above " +"the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "" +"若此值為正，Z 抬升功能僅在 Z 值高於「Z 抬升下邊界」參數且低於此設定值時才會啟" +"用" -msgid "Z hop type" -msgstr "抬Z類型" +msgid "Z-hop type" +msgstr "Z 抬升類型" + +msgid "Type of Z-hop." +msgstr "" msgid "Slope" msgstr "梯形" @@ -12039,50 +14455,62 @@ msgid "Spiral" msgstr "螺旋" msgid "Traveling angle" -msgstr "" +msgstr "移動角度" msgid "" -"Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results " -"in Normal Lift" -msgstr "" +"Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results " +"in Normal Lift." +msgstr "適用於坡度和螺旋 Z 抬升類型的移動角度。將其設為 90° 可執行正常抬升" msgid "Only lift Z above" -msgstr "僅在高度以上抬Z" +msgstr "僅在高度以上抬 Z" msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z." -msgstr "如果設定為正值，則 Z 抬升僅在指定的絕對 Z 之上發生" +msgstr "若將此值設定為正數，Z 抬升僅會在超過指定的絕對 Z 值時啟用。" msgid "Only lift Z below" -msgstr "僅在高度以下抬Z" +msgstr "僅在 Z 值低於指定值時抬升" msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z." -msgstr "如果設定為正值，則 Z 抬升僅在指定的絕對 Z 以下發生。" +msgstr "若將此值設定為正數，Z 抬升僅會在低於指定的絕對 Z 值時啟用。" msgid "On surfaces" -msgstr "僅表面抬Z" +msgstr "僅在表面" msgid "" -"Enforce Z Hop behavior. This setting is impacted by the above settings (Only " +"Enforce Z-Hop behavior. This setting is impacted by the above settings (Only " "lift Z above/below)." msgstr "" -"強制 Z 抬升行為。此設定受上述設定的影響（僅在高度以下抬Z/僅在高度以上抬Z）。" +"強制啟用 Z 抬升行為。此功能受前述設定（僅在 Z 值高於/低於時啟用）的影響。" msgid "All Surfaces" msgstr "所有表面" msgid "Top Only" -msgstr "僅頂面" +msgstr "僅在頂面" msgid "Bottom Only" -msgstr "僅底面" +msgstr "僅在底面" msgid "Top and Bottom" msgstr "頂面和地面" +msgid "Direct Drive" +msgstr "" + +msgid "Bowden" +msgstr "遠程擠出機" + +msgid "Nozzle Volume Type" +msgstr "" + +msgid "Default Nozzle Volume Type." +msgstr "" + msgid "Extra length on restart" msgstr "額外回填長度" @@ -12099,16 +14527,16 @@ msgstr "當換色後回抽被補償時，擠出機將推入額外長度的線材 msgid "Retraction Speed" msgstr "回抽速度" -msgid "Speed of retractions" -msgstr "回抽速度" +msgid "Speed for retracting filament from the nozzle." +msgstr "" -msgid "Deretraction Speed" +msgid "De-retraction Speed" msgstr "裝填速度" msgid "" -"Speed for reloading filament into extruder. Zero means same speed with " -"retraction" -msgstr "線材裝填的速度，0 表示和回抽速度一致。" +"Speed for reloading filament into the nozzle. Zero means same speed of " +"retraction." +msgstr "" msgid "Use firmware retraction" msgstr "使用韌體回抽" @@ -12117,23 +14545,23 @@ msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" -"（實驗設定）使用 G10 和 G11 命令讓韌體處理回抽。該功能僅支持最近版本的 " -"Marlin 固件。" +"此實驗性功能使用 G10 和 G11 指令，由韌體負責執行回抽操作。僅支援於最新版本的 " +"Marlin 韌體。" msgid "Show auto-calibration marks" -msgstr "顯示雷達校準線" +msgstr "顯示雷達校正線" msgid "Disable set remaining print time" -msgstr "" +msgstr "停用剩餘列印時間設定" msgid "" -"Disable generating of the M73: Set remaining print time in the final gcode" -msgstr "" +"Disable generating of the M73: Set remaining print time in the final G-code." +msgstr "停用在最終 G-code 中產生 M73 指令以設定剩餘列印時間" msgid "Seam position" msgstr "接縫位置" -msgid "The start position to print each part of outer wall" +msgid "The start position to print each part of outer wall." msgstr "Z縫(外牆銜接)的位置" msgid "Nearest" @@ -12142,6 +14570,9 @@ msgstr "最近" msgid "Aligned" msgstr "對齊" +msgid "Aligned back" +msgstr "" + msgid "Back" msgstr "背面" @@ -12165,23 +14596,25 @@ msgid "" "This amount can be specified in millimeters or as a percentage of the " "current extruder diameter. The default value for this parameter is 10%." msgstr "" +"為了降低閉環擠出中接縫的可見度，閉環會中斷並縮短指定的長度。\n" +"此長度可設定為毫米或擠出機直徑的百分比，預設值為 10%。" msgid "Scarf joint seam (beta)" -msgstr "" +msgstr "斜拼接縫（Beta）" msgid "Use scarf joint to minimize seam visibility and increase seam strength." -msgstr "" +msgstr "採用斜拼接縫來減少接縫的可見度並提高接縫的強度。" msgid "Conditional scarf joint" -msgstr "" +msgstr "斜拼接縫條件" msgid "" "Apply scarf joints only to smooth perimeters where traditional seams do not " "conceal the seams at sharp corners effectively." -msgstr "" +msgstr "僅在平滑外牆使用斜拼接縫，用於傳統接縫無法在尖角處有效隱藏接縫的情況。" msgid "Conditional angle threshold" -msgstr "" +msgstr "角度閾值條件" msgid "" "This option sets the threshold angle for applying a conditional scarf joint " @@ -12190,9 +14623,11 @@ msgid "" "(indicating the absence of sharp corners), a scarf joint seam will be used. " "The default value is 155°." msgstr "" +"此選項設定斜拼接縫的角度閾值條件。當外牆迴圈內的最大角度超過該設定值（表示不" +"存在尖角）時，將套用斜接縫接縫。預設值為 155°。" msgid "Conditional overhang threshold" -msgstr "" +msgstr "懸空閾值條件" #, no-c-format, no-boost-format msgid "" @@ -12202,70 +14637,80 @@ msgid "" "at 40% of the external wall's width. Due to performance considerations, the " "degree of overhang is estimated." msgstr "" +"此選項用於設定斜拼接縫的懸空閾值。當外牆未支撐的部分小於該閾值時，將套用斜拼" +"接縫。預設閾值為外層牆寬度的 40%。為了考慮性能，此懸空程度為估算值。" msgid "Scarf joint speed" -msgstr "" +msgstr "斜拼接縫速度" msgid "" "This option sets the printing speed for scarf joints. It is recommended to " -"print scarf joints at a slow speed (less than 100 mm/s). It's also " -"advisable to enable 'Extrusion rate smoothing' if the set speed varies " -"significantly from the speed of the outer or inner walls. If the speed " -"specified here is higher than the speed of the outer or inner walls, the " -"printer will default to the slower of the two speeds. When specified as a " -"percentage (e.g., 80%), the speed is calculated based on the respective " -"outer or inner wall speed. The default value is set to 100%." +"print scarf joints at a slow speed (less than 100 mm/s). It's also advisable " +"to enable 'Extrusion rate smoothing' if the set speed varies significantly " +"from the speed of the outer or inner walls. If the speed specified here is " +"higher than the speed of the outer or inner walls, the printer will default " +"to the slower of the two speeds. When specified as a percentage (e.g., 80%), " +"the speed is calculated based on the respective outer or inner wall speed. " +"The default value is set to 100%." msgstr "" +"此選項用於設定斜拼接縫的列印速度，建議以較慢的速度進行列印（小於 100 mm/s）。" +"若設定的速度與外牆或內牆速度差異較大，建議啟用『平滑擠出率』功能。若此處設定" +"的速度高於外牆或內牆速度，列印設備將自動選擇兩者中較慢的速度。當以百分比（如 " +"80%）指定時，該速度將基於外牆或內牆速度進行計算。預設值為 100%。" msgid "Scarf joint flow ratio" -msgstr "" +msgstr "斜拼接縫流量比" msgid "This factor affects the amount of material for scarf joints." -msgstr "" +msgstr "此參數會影響斜拼接縫的擠出流量。" msgid "Scarf start height" -msgstr "" +msgstr "斜拼接縫起始高度" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the " "current layer height. The default value for this parameter is 0." msgstr "" +"設定斜拼接縫的起始高度。該值可用毫米或目前層高度的百分比表示，預設值為 0。" msgid "Scarf around entire wall" -msgstr "" +msgstr "環繞整個牆體的斜拼接縫" msgid "The scarf extends to the entire length of the wall." -msgstr "" +msgstr "斜拼接縫覆蓋牆體的整個長度。" msgid "Scarf length" -msgstr "" +msgstr "斜拼接縫長度" msgid "" "Length of the scarf. Setting this parameter to zero effectively disables the " "scarf." -msgstr "" +msgstr "斜拼接縫的長度。若將此參數設為 0，將停用斜接功能。" msgid "Scarf steps" -msgstr "" +msgstr "斜拼接縫段數" msgid "Minimum number of segments of each scarf." -msgstr "" +msgstr "每個斜拼接縫的最小分段數量。" msgid "Scarf joint for inner walls" -msgstr "" +msgstr "內牆的斜接縫" msgid "Use scarf joint for inner walls as well." -msgstr "" +msgstr "內牆同樣使用斜接縫。" msgid "Role base wipe speed" msgstr "自動擦拭速度" msgid "" -"The wipe speed is determined by the speed of the current extrusion role.e.g. " -"if a wipe action is executed immediately following an outer wall extrusion, " -"the speed of the outer wall extrusion will be utilized for the wipe action." +"The wipe speed is determined by the speed of the current extrusion role. e." +"g. if a wipe action is executed immediately following an outer wall " +"extrusion, the speed of the outer wall extrusion will be utilized for the " +"wipe action." msgstr "" +"拭的速度由目前擠出任務的速度決定。例如，若擦拭操作緊接著外牆的擠出執行，則將" +"使用外牆擠出的速度進行擦拭。" msgid "Wipe on loops" msgstr "閉環擦拭" @@ -12274,48 +14719,68 @@ msgid "" "To minimize the visibility of the seam in a closed loop extrusion, a small " "inward movement is executed before the extruder leaves the loop." msgstr "" -"為了最大限度地減少閉環擠出中接縫的可見性，在擠出機離開環之前，會向內執行一個" -"小小的移動。" +"為了降低閉環擠出中接縫的可見性，在擠出機退出閉環前會進行一次微小的內縮移動。" msgid "Wipe before external loop" -msgstr "" +msgstr "外牆迴圈前的擦拭動作" msgid "" -"To minimise visibility of potential overextrusion at the start of an " +"To minimize visibility of potential overextrusion at the start of an " "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall " -"print order, the deretraction is performed slightly on the inside from the " +"print order, the de-retraction is performed slightly on the inside from the " "start of the external perimeter. That way any potential over extrusion is " -"hidden from the outside surface. \n" +"hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall " "print order as in these modes it is more likely an external perimeter is " -"printed immediately after a deretraction move." +"printed immediately after a de-retraction move." msgstr "" +"為了減少在使用『外牆/內牆』或『內牆/外牆/內牆』牆體列印順序時，外牆開始位置可" +"能出現的過擠出痕跡，回抽復位動作會稍微偏向外牆起始位置的內側執行。這樣可將可" +"能的過擠出隱藏於外牆內部。此功能對於『外牆/內牆』或『內牆/外牆/內牆』牆體列印" +"順序非常有用，因為在這些模式下，外牆往往緊接著回抽復位動作開始列印。" msgid "Wipe speed" msgstr "擦拭速度" -#, fuzzy msgid "" "The wipe speed is determined by the speed setting specified in this " -"configuration.If the value is expressed as a percentage (e.g. 80%), it will " -"be calculated based on the travel speed setting above.The default value for " -"this parameter is 80%" +"configuration. If the value is expressed as a percentage (e.g. 80%), it will " +"be calculated based on the travel speed setting above. The default value for " +"this parameter is 80%." msgstr "" -"擦拭速度是根據此配置中指定的速度設定確定的。如果該值以百分比形式表示（例如 " -"80%），則將根據上方的移動速度設定進行計算。該參數的預設值為 80%。" +"擦拭速度取決於此配置中設定的速度值。若以百分比表示（例如 80%），則會根據上述" +"的移動速度設定進行計算。該參數的預設值為 80%" msgid "Skirt distance" -msgstr "Skirt距離" +msgstr "Skirt 距離" -msgid "Distance from skirt to brim or object" -msgstr "從 skirt 到模型或者 brim（裙邊）的距離" +msgid "The distance from the skirt to the brim or the object." +msgstr "從 Skirt 到模型或者 Brim 的距離" + +msgid "Skirt start point" +msgstr "Skirt 起始位置" + +msgid "" +"Angle from the object center to skirt start point. Zero is the most right " +"position, counter clockwise is positive angle." +msgstr "" +"物件中心至 Skirt 起始點的角度。0 度表示最右側位置，逆時針方向為正角度。" msgid "Skirt height" msgstr "Skirt 高度" -msgid "How many layers of skirt. Usually only one layer" -msgstr "skirt 有多少層。通常只有一層" +msgid "How many layers of skirt. Usually only one layer." +msgstr "Skirt 有多少層。通常只有一層" + +msgid "Single loop after first layer" +msgstr "" + +msgid "" +"Limits the skirt/draft shield loops to one wall after the first layer. This " +"is useful, on occasion, to conserve filament but may cause the draft shield/" +"skirt to warp / crack." +msgstr "" msgid "Draft shield" msgstr "防風罩" @@ -12323,28 +14788,42 @@ msgstr "防風罩" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and " "detaching from print bed due to wind draft. It is usually needed only with " -"open frame printers, i.e. without an enclosure. \n" -"\n" -"Options:\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt height.\n" +"open frame printers, i.e. without an enclosure.\n" "\n" +"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt " +"height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt " "distance from the object. Therefore, if brims are active it may intersect " "with them. To avoid this, increase the skirt distance value.\n" msgstr "" - -msgid "Limited" -msgstr "有限" +"防風罩可有效保護 ABS 或 ASA 列印物免受氣流影響，避免翹曲或脫離列印床。通常僅" +"在開放式框架的印表機（即無外殼）中需要使用。\n" +"\n" +"啟用後，Skirt 的高度將與列印物的最高點相同。若未啟用，則使用『Skirt 高度』的" +"設定值。\n" +"注意：啟用擋風護盾時，Skirt 會按照設定的 Skirt 距離列印於物體周圍。如果同時啟" +"用了耳狀 Brim，Skirt 可能會與其重疊。為避免此問題，請增加 Skirt 距離的設定" +"值。\n" msgid "Enabled" msgstr "啟用" +msgid "Skirt type" +msgstr "Skirt 類型" + +msgid "" +"Combined - single skirt for all objects, Per object - individual object " +"skirt." +msgstr "合併 - 所有物件共用一個 Skirt；逐件 - 每個物件使用獨立的 Skirt」" + +msgid "Per object" +msgstr "逐件" + msgid "Skirt loops" msgstr "Skirt 圈數" -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "skirt 的圈數。0 表示關閉 skirt。" +msgid "Number of loops for the skirt. Zero means disabling skirt." +msgstr "Skirt 的圈數。0 表示關閉 Skirt" msgid "Skirt speed" msgstr "Skirt 速度" @@ -12353,62 +14832,105 @@ msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "Skirt 速度，單位為 mm/秒。 0 表示使用預設層擠出速度。" msgid "Skirt minimum extrusion length" -msgstr "" +msgstr "Skirt 最小擠出長度" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means " "this feature is disabled.\n" "\n" -"Using a non zero value is useful if the printer is set up to print without a " -"prime line." +"Using a non-zero value is useful if the printer is set up to print without a " +"prime line.\n" +"Final number of loops is not taking into account while arranging or " +"validating objects distance. Increase loop number in such case." msgstr "" +"列印 Skirt 時的最小擠出線材長度（單位：毫米）。設為 0 表示停用此功能。若列印" +"設備設定為不使用沖洗線材，建議設定為非零值。注意，排列或驗證物件距離時，最終" +"迴圈數不會被計算進去。如需更多迴圈，請手動增加迴圈數設定。" msgid "" -"The printing speed in exported gcode will be slowed down, when the estimated " -"layer time is shorter than this value, to get better cooling for these layers" +"The printing speed in exported G-code will be slowed down when the estimated " +"layer time is shorter than this value in order to get better cooling for " +"these layers." msgstr "" -"當層預估列印時間小於這個數值時，列印速度將會降低，從而獲得更好的冷卻效果。" +"當預估的層列印時間低於該設定值時，導出的 G-code 中的列印速度會自動減慢，以提" +"升該層的冷卻效果" msgid "Minimum sparse infill threshold" msgstr "稀疏填充最小臨界值" msgid "" "Sparse infill area which is smaller than threshold value is replaced by " -"internal solid infill" -msgstr "小於這個臨界值的稀疏填充區域將會被內部實心填充替代。" +"internal solid infill." +msgstr "小於設定閾值的稀疏填充區域將替換為內部實心填充" + +msgid "Solid infill" +msgstr "實心填充" + +msgid "Filament to print solid infill." +msgstr "列印實心填充所使用的線材" msgid "" "Line width of internal solid infill. If expressed as a %, it will be " "computed over the nozzle diameter." -msgstr "內部實心填充的線寬。如果以%表示，它將以噴嘴直徑為基準來計算。" +msgstr "內部實心填充的列印線寬。若以百分比表示，將根據噴嘴直徑進行計算。" -msgid "Speed of internal solid infill, not the top and bottom surface" -msgstr "內部實心填充的速度，不是頂面和底面。" +msgid "Speed of internal solid infill, not the top and bottom surface." +msgstr "內部實心填充的列印速度，不適用於頂面和底面" -#, fuzzy msgid "" -"Spiralize smooths out the z moves of the outer contour. And turns a solid " +"Spiralize smooths out the Z moves of the outer contour. And turns a solid " "model into a single walled print with solid bottom layers. The final " -"generated model has no seam" +"generated model has no seam." msgstr "" -"沿著物件的外輪廓螺旋上升，將實體模型轉變為只有底面實心層和側面單層牆壁的列" -"印。最後產生的列印物件沒有接縫。" +"平滑螺旋功能可平滑外輪廓的 Z 軸運動，並將實心模型轉換為具有實心底層的單壁列" +"印。產生的最終模型不會有接縫" msgid "Smooth Spiral" -msgstr "" +msgstr "平滑螺旋" msgid "" -"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam " -"at all, even in the XY directions on walls that are not vertical" +"Smooth Spiral smooths out X and Y moves as well, resulting in no visible " +"seam at all, even in the XY directions on walls that are not vertical." msgstr "" +"平滑螺旋功能同時平滑 X 和 Y 軸的移動，確保即使在非垂直牆面上，X 和 Y 方向也不" +"會出現可見的接縫" msgid "Max XY Smoothing" -msgstr "" +msgstr "XY 軸最大平滑度" +#, no-c-format, no-boost-format msgid "" -"Maximum distance to move points in XY to try to achieve a smooth spiralIf " -"expressed as a %, it will be computed over nozzle diameter" +"Maximum distance to move points in XY to try to achieve a smooth spiral. If " +"expressed as a %, it will be computed over nozzle diameter." msgstr "" +"在 XY 平面中為實現平滑螺旋所允許移動點的最大距離。若以百分比表示，將根據噴嘴" +"直徑計算" + +msgid "Spiral starting flow ratio" +msgstr "螺旋起始擠出比率" + +#, no-c-format, no-boost-format +msgid "" +"Sets the starting flow ratio while transitioning from the last bottom layer " +"to the spiral. Normally the spiral transition scales the flow ratio from 0% " +"to 100% during the first loop which can in some cases lead to under " +"extrusion at the start of the spiral." +msgstr "" +"設定從最後一層底部過渡到螺旋時的起始流量比率。通常，螺旋過渡會在第一圈內將流" +"量比率從 0% 逐步增加到 100%，但在某些情況下，這可能會導致螺旋開始時發生擠出不" +"足的問題。" + +msgid "Spiral finishing flow ratio" +msgstr "螺旋收尾擠出比率" + +#, no-c-format, no-boost-format +msgid "" +"Sets the finishing flow ratio while ending the spiral. Normally the spiral " +"transition scales the flow ratio from 100% to 0% during the last loop which " +"can in some cases lead to under extrusion at the end of the spiral." +msgstr "" +"設定螺旋結束時的最終流量比率。通常，螺旋過渡會在最後一圈內將流量比率從 100% " +"逐步減少到 0%，但在某些情況下，這可能會導致螺旋結束時發生擠出不足的問題。" msgid "" "If smooth or traditional mode is selected, a timelapse video will be " @@ -12420,10 +14942,10 @@ msgid "" "process of taking a snapshot, prime tower is required for smooth mode to " "wipe nozzle." msgstr "" -"如果啟用平滑模式或者傳統模式，將在每次列印時產生縮時錄影影片。列印完每層後，" -"將用內建相機拍攝快照。列印完成後，所有這些快照會組合成一個延時影片。如果啟用" -"平滑模式，列印完每層後，工具頭將移動到吐料槽，然後拍攝快照。由於平滑模式在拍" -"攝快照的過程中熔融的線材可能會從噴嘴中洩漏，因此需要使用擦拭塔進行噴嘴擦拭。" +"選擇平滑模式或傳統模式時，列印過程將產生縮時影片。每列印一層，相機會拍攝一張" +"照片。列印完成後，這些照片會被合成為縮時影片。如果選擇了平滑模式，擠出機會在" +"每層列印完成後移動到廢料槽拍攝一張照片。由於在拍攝過程中熔融的線材可能會從噴" +"嘴洩漏，平滑模式需要使用換料塔來清潔噴嘴。" msgid "Traditional" msgstr "傳統模式" @@ -12431,19 +14953,51 @@ msgstr "傳統模式" msgid "Temperature variation" msgstr "軟化溫度" +#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" +msgid "" +"Temperature difference to be applied when an extruder is not active. The " +"value is not used when 'idle_temperature' in filament settings is set to non-" +"zero value." +msgstr "" +"設定擠出機閒置時的溫差。若線材設定中的『idle_temperature』設為非零值，該參數" +"將不生效。" + +msgid "Preheat time" +msgstr "預熱時間" + +msgid "" +"To reduce the waiting time after tool change, Orca can preheat the next tool " +"while the current tool is still in use. This setting specifies the time in " +"seconds to preheat the next tool. Orca will insert a M104 command to preheat " +"the tool in advance." +msgstr "" +"為了縮短工具更換後的等待時間，Orca 可在目前工具使用期間提前預熱下一個工具。此" +"設定用於指定預熱下一個工具的時間（單位：秒）。Orca 將自動插入 M104 指令以提前" +"進行工具預熱。" + +msgid "Preheat steps" +msgstr "預熱階段" + +msgid "" +"Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. " +"For other printers, please set it to 1." +msgstr "" +"插入多條預熱指令（例如：M104.1）。此功能僅適用於 Prusa XL。其他列印設備請將其" +"設為 1。" + msgid "Start G-code" msgstr "起始 G-code" -msgid "Start G-code when start the whole printing" +msgid "Start G-code when starting the entire print." msgstr "整個列印開始前的起始 G-code" -msgid "Start G-code when start the printing of this filament" +msgid "Start G-code when starting the printing of this filament." msgstr "開始使用這個線材列印的起始 G-code" msgid "Single Extruder Multi Material" msgstr "單擠出機多線材" -msgid "Use single nozzle to print multi filament" +msgid "Use single nozzle to print multi filament." msgstr "使用單噴嘴列印多線材" msgid "Manual Filament Change" @@ -12456,27 +15010,30 @@ msgid "" "printing, where we use M600/PAUSE to trigger the manual filament change " "action." msgstr "" +"啟用此選項後，自定義的換線 G-code 將僅在列印開始時被省略，整個列印過程中會跳" +"過工具更換指令（例如：T0）。此功能適用於手動多材料列印，允許使用 M600/PAUSE " +"指令來觸發手動換線操作。" msgid "Purge in prime tower" -msgstr "沖刷進擦拭塔" +msgstr "沖刷進換料塔" -msgid "Purge remaining filament into prime tower" -msgstr "沖刷剩餘的線材進入擦拭塔" +msgid "Purge remaining filament into prime tower." +msgstr "沖刷剩餘的線材進入換料塔" msgid "Enable filament ramming" -msgstr "啟用線材尖端成型" - -msgid "No sparse layers (beta)" msgstr "" +msgid "No sparse layers (beta)" +msgstr "取消稀疏層（Beta）" + msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " +"If enabled, the wipe tower will not be printed on layers with no tool " +"changes. On layers with a tool change, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"如果啟用，將不會在沒有換色的層列印擦拭塔。存在換色的層時，擠出機將降低高度打" -"印擦拭塔。使用者應該確保不會與列印物件發生衝突。" +"啟用此選項後，換料塔將不會在沒有工具更換的層中列印。在有工具更換的層中，擠出" +"機將向下移動以列印換料塔。請使用者自行確保清洗塔與列印物之間不會發生碰撞。" msgid "Prime all printing extruders" msgstr "所有擠出機畫線" @@ -12484,7 +15041,7 @@ msgstr "所有擠出機畫線" msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." -msgstr "如果啟用，所有擠出機將在列印開始時在列印板前方畫線" +msgstr "如果啟用，所有擠出機將在列印開始時在列印板前方畫線。" msgid "Slice gap closing radius" msgstr "切片間隙閉合半徑" @@ -12494,8 +15051,8 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"在三角形網格切片過程中，小於2倍間隙閉合半徑的裂紋將被填充。間隙閉合操作可能會" -"降低最終列印解析度，因此建議降值保持在合理的較低水準" +"在三角網格切片過程中，寬度小於 2 倍間隙閉合半徑的裂縫將被填補。由於間隙閉合操" +"作可能降低列印的最終解析度，因此建議將該值設置為較低的合理範圍。" msgid "Slicing Mode" msgstr "切片模式" @@ -12504,7 +15061,8 @@ msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" -"對 3DLabPrint 的飛機模型使用 \"奇偶\"。使用 \"閉孔 \"來關閉模型上的所有孔。" +"針對 3DLabPrint 飛機模型，請選擇『奇偶』模式。若需閉合模型中的所有孔洞，請啟" +"用『閉合孔洞』選項。" msgid "Regular" msgstr "常規" @@ -12513,11 +15071,10 @@ msgid "Even-odd" msgstr "奇偶" msgid "Close holes" -msgstr "閉孔" +msgstr "閉合孔洞" -#, fuzzy msgid "Z offset" -msgstr "Z 軸偏移（Z offset）" +msgstr "Z 偏移" msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -12525,9 +15082,9 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"該設定值將從輸出 G-code 中的所有 Z 座標增加（或 減少）。 它用於 Z 軸限位器位" -"置的補償：例如，您的 Z 軸限位器實際上使噴嘴距離列印板高了 0.3 mm，請將其設定" -"為 -0.3。" +"此值將被加至（或減去）輸出 G-code 中的所有 Z 坐標，用於補償不準確的 Z 軸限位" +"開關位置。例如，如果限位開關的歸零導致噴嘴實際距離列印床 0.3 毫米，可將此值設" +"為 -0.3（或者調整限位開關位置）。" msgid "Enable support" msgstr "開啟支撐" @@ -12536,47 +15093,48 @@ msgid "Enable support generation." msgstr "開啟支撐產生。" msgid "" -"normal(auto) and tree(auto) is used to generate support automatically. If " -"normal(manual) or tree(manual) is selected, only support enforcers are " -"generated" +"Normal (auto) and Tree (auto) are used to generate support automatically. If " +"Normal (manual) or Tree (manual) is selected, only support enforcers are " +"generated." msgstr "" -"普通（自動）和樹狀（自動）用於自動產生支撐體。如果選擇普通（手動）或樹狀（手" -"動），僅會在支撐強制面上產生支撐。" +"選擇「普通 (自動)」或「樹狀 (自動)」時，系統將自動產生支撐結構。若選擇「普通 " +"(手動)」或「樹狀 (手動)」，則僅會產生手動設定的支撐區域" -#, fuzzy -msgid "normal(auto)" -msgstr "普通（自動）" +msgid "Normal (auto)" +msgstr "普通 (自動)" -#, fuzzy -msgid "tree(auto)" -msgstr "樹狀（自動）" +msgid "Tree (auto)" +msgstr "樹狀 (自動)" -#, fuzzy -msgid "normal(manual)" -msgstr "普通（手動）" +msgid "Normal (manual)" +msgstr "普通 (手動)" -#, fuzzy -msgid "tree(manual)" -msgstr "樹狀（手動）" +msgid "Tree (manual)" +msgstr "樹狀 (手動)" -msgid "Support/object xy distance" -msgstr "支撐/模型 xy 間距" +msgid "Support/object XY distance" +msgstr "支撐/模型 XY 間距" -msgid "XY separation between an object and its support" -msgstr "模型和支撐之間 XY 分離距離" +msgid "XY separation between an object and its support." +msgstr "模型和支撐之間 XY 的間距" + +msgid "Support/object first layer gap" +msgstr "支撐/物件第一層間隙" + +msgid "XY separation between an object and its support at the first layer." +msgstr "物件與支撐在第一層的 XY 方向間距。" msgid "Pattern angle" -msgstr "模式角度" +msgstr "支撐角度" -#, fuzzy msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "設定支撐圖案在水平面的旋轉角度。" +msgstr "設定支撐圖形在水平面的旋轉角度。" msgid "On build plate only" msgstr "僅在列印板產生" -msgid "Don't create support on model surface, only on build plate" -msgstr "不在模型表面上產生支撐，只在列印板上產生。" +msgid "Don't create support on model surface, only on build plate." +msgstr "不在模型表面上產生支撐，只在列印板上產生" msgid "Support critical regions only" msgstr "僅支撐關鍵區域" @@ -12584,41 +15142,42 @@ msgstr "僅支撐關鍵區域" msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." -msgstr "僅對關鍵區域產生支撐，包括尖尾、懸臂等。" +msgstr "僅針對關鍵區域（如尖銳尾部、懸臂等）產生支撐結構。" -msgid "Remove small overhangs" -msgstr "移除小懸空" +msgid "Ignore small overhangs" +msgstr "" -msgid "Remove small overhangs that possibly need no supports." -msgstr "移除可能並不需要支撐的小懸空。" +msgid "Ignore small overhangs that possibly don't require support." +msgstr "" msgid "Top Z distance" -msgstr "頂部Z距離" +msgstr "頂部 Z 間距" -msgid "The z gap between the top support interface and object" -msgstr "支撐頂部和模型之間的z間隙" +msgid "The Z gap between the top support interface and object." +msgstr "支撐頂部和模型之間的 Z 間隙" msgid "Bottom Z distance" -msgstr "底部Z距離" +msgstr "底部 Z 間距" -msgid "The z gap between the bottom support interface and object" -msgstr "支撐產生於模型表面時，支撐面底部和模型之間的z間隙" +msgid "The Z gap between the bottom support interface and object." +msgstr "支撐產生於模型表面時，支撐面底部和模型之間的 Z 間隙" msgid "Support/raft base" msgstr "支撐/筏層主體" -#, fuzzy msgid "" "Filament to print support base and raft. \"Default\" means no specific " -"filament for support and current filament is used" -msgstr "列印支撐主體和筏層的線材。\"預設\"代表不指定特定的線材，並使用目前線材" +"filament for support and current filament is used." +msgstr "" +"用於列印支撐基座和筏層的線材。選擇『預設』時，將使用目前列印的線材，而非特定" +"線材" msgid "Avoid interface filament for base" -msgstr "" +msgstr "避免介面線材用於底座" msgid "" "Avoid using support interface filament to print support base if possible." -msgstr "" +msgstr "如果可能，避免使用支援介面線材來列印支援底座。" msgid "" "Line width of support. If expressed as a %, it will be computed over the " @@ -12626,7 +15185,7 @@ msgid "" msgstr "支撐的線寬。如果以 % 表示，它將以噴嘴直徑為基準來計算。" msgid "Interface use loop pattern" -msgstr "接觸面採用圈形走線。" +msgstr "接觸面採用圈形走線" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." @@ -12635,46 +15194,49 @@ msgstr "使用圈形走線覆蓋頂部接觸面。預設關閉。" msgid "Support/raft interface" msgstr "支撐/筏層界面" -#, fuzzy msgid "" "Filament to print support interface. \"Default\" means no specific filament " -"for support interface and current filament is used" -msgstr "列印支撐接觸面的線材。\"預設\"代表不指定特定的線材，並使用目前線材" +"for support interface and current filament is used." +msgstr "" +"用於列印支撐介面的線材。選擇『預設』時，將使用目前列印的線材，而非指定的特定" +"線材" msgid "Top interface layers" msgstr "頂部接觸面層數" -msgid "Number of top interface layers" +msgid "Number of top interface layers." msgstr "頂部接觸面層數" msgid "Bottom interface layers" msgstr "底部接觸面層數" -msgid "Number of bottom interface layers" -msgstr "" +msgid "Number of bottom interface layers." +msgstr "底層介面層數" msgid "Same as top" msgstr "與頂部相同" msgid "Top interface spacing" -msgstr "頂部接觸面線距" +msgstr "頂部接觸面間距" -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "接觸面的線距。0 代表實心接觸面。" +msgid "" +"Spacing of interface lines. Zero means solid interface.\n" +"Force using solid interface when support ironing is enabled." +msgstr "" msgid "Bottom interface spacing" -msgstr "底部接觸面線距" +msgstr "底部接觸面間距" -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "底部接觸面走線的線距。0 表示實心接觸面。" +msgid "Spacing of bottom interface lines. Zero means solid interface." +msgstr "底部接觸面走線的線距。0 表示實心接觸面" -msgid "Speed of support interface" +msgid "Speed of support interface." msgstr "支撐面速度" msgid "Base pattern" msgstr "支撐主體圖案" -msgid "Line pattern of support" +msgid "Line pattern of support." msgstr "支撐走線圖案" msgid "Rectilinear grid" @@ -12689,27 +15251,27 @@ msgstr "支撐面圖案" msgid "" "Line pattern of support interface. Default pattern for non-soluble support " "interface is Rectilinear, while default pattern for soluble support " -"interface is Concentric" +"interface is Concentric." msgstr "" "支撐接觸面的走線圖案。非可溶支撐接觸面的預設圖案為直線，可溶支撐接觸面的預設" -"圖案為同心。" +"圖案為同心" msgid "Rectilinear Interlaced" -msgstr "交疊的直線" +msgstr "交錯直線" msgid "Base pattern spacing" msgstr "主體圖案線距" -msgid "Spacing between support lines" +msgid "Spacing between support lines." msgstr "支撐線距" msgid "Normal Support expansion" msgstr "普通支撐延伸" -msgid "Expand (+) or shrink (-) the horizontal span of normal support" +msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "在水平方向對普通支撐進行延伸（+）或收縮（-）" -msgid "Speed of support" +msgid "Speed of support." msgstr "支撐列印速度" msgid "" @@ -12721,14 +15283,20 @@ msgid "" "style will create similar structure to normal support under large flat " "overhangs." msgstr "" -"支撐的樣式和形狀。 對於普通支撐，將支撐投影到網格中將創建更穩定的支撐（預" -"設），而緊貼的支撐塔將節省材料並減少物體表面的痕跡。\n" -"對於樹狀支撐，細長和有機風格將更積極地合併樹枝並節省大量材料（預設有機），而" -"混合風格將在大平面懸空下建立與正常支撐類似的結構。" +"支撐的樣式與形狀設定。普通支撐使用網格（預設設定）可提供更穩定的支撐，而緊貼" +"型支撐可節省材料並減少對物件表面的損傷。樹狀支撐中，『有機樹』會更積極地融合" +"分支，節省大量材料（預設為有機樹）；而『混合樹』則會在較大的平坦懸空區域下生" +"成類似於普通支撐的結構。" + +msgid "Default (Grid/Organic)" +msgstr "預設 (網格/有機)" msgid "Snug" msgstr "緊貼" +msgid "Organic" +msgstr "有機樹" + msgid "Tree Slim" msgstr "苗條樹" @@ -12738,60 +15306,62 @@ msgstr "粗壯樹" msgid "Tree Hybrid" msgstr "混合樹" -msgid "Organic" -msgstr "有機樹" - msgid "Independent support layer height" -msgstr "支撐獨立層高" +msgstr "獨立支撐層高" -#, fuzzy msgid "" "Support layer uses layer height independent with object layer. This is to " -"support customizing z-gap and save print time.This option will be invalid " +"support customizing Z-gap and save print time. This option will be invalid " "when the prime tower is enabled." msgstr "" -"支撐層使用與物件層獨立的層高。這是為了支援自訂 Ｚ間隙（z-gap）並且節省列印時" -"間。當擦拭塔被啟用時，這個選項將無效。" +"支撐層的層厚設定可獨立於物件層高度，允許自定義 Z 間隙並縮短列印時間。此選項在" +"啟用換料塔時將失效。" msgid "Threshold angle" msgstr "臨界值角度" -#, fuzzy msgid "" "Support will be generated for overhangs whose slope angle is below the " "threshold." msgstr "將會為懸空角度低於臨界值的模型表面產生支撐。" +msgid "Threshold overlap" +msgstr "閾值疊加比例" + +msgid "" +"If threshold angle is zero, support will be generated for overhangs whose " +"overlap is below the threshold. The smaller this value is, the steeper the " +"overhang that can be printed without support." +msgstr "" +"當閾值角度設為 0 時，系統將為重疊比例低於該閾值的懸垂部分產生支撐。數值越小，" +"代表可以在不使用支撐的情況下列印更陡峭的懸垂結構。" + msgid "Tree support branch angle" msgstr "樹狀支撐分支角度" -#, fuzzy msgid "" -"This setting determines the maximum overhang angle that t he branches of " -"tree support allowed to make.If the angle is increased, the branches can be " +"This setting determines the maximum overhang angle that the branches of tree " +"support are allowed to make. If the angle is increased, the branches can be " "printed more horizontally, allowing them to reach farther." msgstr "" -"此設定確定了允許樹狀支撐的最大懸垂角度。如果角度增加，可以更水平地列印分支，" -"使它們可以到達更遠的地方。" +"此設定決定樹狀支撐的最大分支角度。如果角度增加，可以更水平地列印分支，使它們" +"可以到達更遠的地方。" -#, fuzzy msgid "Preferred Branch Angle" msgstr "偏好樹狀分支角度" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" -#, fuzzy msgid "" "The preferred angle of the branches, when they do not have to avoid the " "model. Use a lower angle to make them more vertical and more stable. Use a " "higher angle for branches to merge faster." msgstr "" -"樹狀分支的偏好角度，當它們不必避開模型時。 使用較低的角度使它們更垂直且更穩" -"定。 使用更高的角度使分支合併得更快。" +"當樹狀分支不必避開模型時的偏好角度。使用較低的角度使它們更垂直且更穩定。使用" +"更高的角度使分支合併得更快。" msgid "Tree support branch distance" msgstr "樹狀支撐分支距離" -#, fuzzy msgid "" "This setting determines the distance between neighboring tree support nodes." msgstr "此設定確定了樹狀支撐的相鄰節點之間的距離。" @@ -12807,42 +15377,34 @@ msgid "" "interfaces instead of a high branch density value if dense interfaces are " "needed." msgstr "" -"用於調整產生樹狀支撐結構的密度。 較高的值會產生更好的懸空，但支撐更難移除，因" -"此如果需要密集的支撐，建議啟用頂部支撐而不是高分支密度值。" - -msgid "Adaptive layer height" -msgstr "自適應層高" - -msgid "" -"Enabling this option means the height of tree support layer except the " -"first will be automatically calculated " -msgstr "啟用此選項將自動計算（除第一層外）樹狀支撐的層高。" +"調整支撐結構中分支末端的密度。較高的密度能提供更好的懸空支撐，但也會使支撐更" +"難移除。如果需要密集的支撐層，建議啟用頂部支撐介面，而非單純提高分支密度設" +"定。" msgid "Auto brim width" -msgstr "自動 brim（裙邊）寬度" +msgstr "自動 Brim 寬度" msgid "" "Enabling this option means the width of the brim for tree support will be " -"automatically calculated" -msgstr "啟用此選項意味著樹狀支撐的裙邊寬度將自動計算自動計算" +"automatically calculated." +msgstr "啟用此選項意味著樹狀支撐的 Brim 寬度將自動計算自動計算" msgid "Tree support brim width" -msgstr "樹狀支撐brim（裙邊）寬度" +msgstr "樹狀支撐 Brim 寬度" -msgid "Distance from tree branch to the outermost brim line" -msgstr "從樹狀支撐分支到最外層brim（裙邊）線的距離" +msgid "Distance from tree branch to the outermost brim line." +msgstr "從樹狀支撐分支到最外層 Brim 線的距離" msgid "Tip Diameter" msgstr "末端直徑" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." -msgstr "有機樹狀支撐的分支末端直徑。" +msgstr "有機樹支撐的分支末端直徑。" msgid "Tree support branch diameter" msgstr "樹狀支撐分支直徑" -#, fuzzy msgid "This setting determines the initial diameter of support nodes." msgstr "此設定確定了樹狀支撐節點的初始直徑。" @@ -12857,64 +15419,103 @@ msgid "" "over their length. A bit of an angle can increase stability of the organic " "support." msgstr "" -"樹狀分支直徑隨著向底部逐漸變粗的角度。 0 角度將導致分支在其長度上具有均勻的厚" -"度。 一點角度可以增加有機樹支撐的穩定性。" - -#, fuzzy -msgid "Branch Diameter with double walls" -msgstr "分支直徑雙層牆" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "" -"Branches with area larger than the area of a circle of this diameter will be " -"printed with double walls for stability. Set this value to zero for no " -"double walls." -msgstr "" -"該數值大於以分支直徑得到的圓形面積時，將列印雙層牆以確保穩定性。 如果不使用雙" -"層牆體，請將此值設為 0。" +"分支直徑隨高度逐漸變粗的角度。若角度設為 0，分支將在整個長度上保持均勻厚度。" +"稍微調整角度可提升有機樹的穩定性。" msgid "Support wall loops" -msgstr "" +msgstr "支撐牆數" -msgid "This setting specify the count of walls around support" -msgstr "" +msgid "" +"This setting specifies the count of support walls in the range of [0,2]. 0 " +"means auto." +msgstr "此設定指定支撐壁的數量，範圍為 [0,2]。0 表示自動調整。" msgid "Tree support with infill" msgstr "樹狀支撐產生填充" -#, fuzzy msgid "" "This setting specifies whether to add infill inside large hollows of tree " -"support" -msgstr "此設定決定是否為樹狀支撐內部的空間產生填充。" +"support." +msgstr "此設定決定是否為樹狀支撐內部的空間產生填充" + +msgid "Ironing Support Interface" +msgstr "" + +msgid "" +"Ironing is using small flow to print on same height of support interface " +"again to make it more smooth. This setting controls whether support " +"interface being ironed. When enabled, support interface will be extruded as " +"solid too." +msgstr "" + +msgid "Support Ironing Pattern" +msgstr "" + +msgid "Support Ironing flow" +msgstr "" + +msgid "" +"The amount of material to extrude during ironing. Relative to flow of normal " +"support interface layer height. Too high value results in overextrusion on " +"the surface." +msgstr "" + +msgid "Support Ironing line spacing" +msgstr "" msgid "Activate temperature control" msgstr "啟動溫度控制" -#, fuzzy msgid "" -"Enable this option for chamber temperature control. An M191 command will be " -"added before \"machine_start_gcode\"\n" -"G-code commands: M141/M191 S(0-255)" +"Enable this option for automated chamber temperature control. This option " +"activates the emitting of an M191 command before the \"machine_start_gcode" +"\"\n" +" which sets the chamber temperature and waits until it is reached. In " +"addition, it emits an M141 command at the end of the print to turn off the " +"chamber heater, if present.\n" +"\n" +"This option relies on the firmware supporting the M191 and M141 commands " +"either via macros or natively and is usually used when an active chamber " +"heater is installed." msgstr "" -"啟用此選項以控製列印設備內部溫度。 在「machine_start_gcode」之前將會新增一個" -"M191指令\n" -"G碼指令：M141/M191 S（0-255）" +"啟用此選項後，將自動控制機箱溫度。此功能會在執行『machine_start_gcode』之前發" +"送 M191 指令，用於設定機箱溫度並等待達到設定值。此外，在列印結束時會傳送 " +"M141 指令以關閉機箱加熱器（若設備有加熱器）。此功能需要韌體原生支援或通過宏指" +"令支援 M191 和 M141 指令，通常用於配備主動機箱加熱器的印表機。" msgid "Chamber temperature" msgstr "機箱溫度" msgid "" -"Higher chamber temperature can help suppress or reduce warping and " -"potentially lead to higher interlayer bonding strength for high temperature " -"materials like ABS, ASA, PC, PA and so on.At the same time, the air " -"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and " -"other low temperature materials,the actual chamber temperature should not be " -"high to avoid cloggings, so 0 which stands for turning off is highly " -"recommended" +"For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber " +"temperature can help suppress or reduce warping and potentially lead to " +"higher interlayer bonding strength. However, at the same time, a higher " +"chamber temperature will reduce the efficiency of air filtration for ABS and " +"ASA.\n" +"\n" +"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " +"should be disabled (set to 0) as the chamber temperature should be low to " +"avoid extruder clogging caused by material softening at the heat break.\n" +"\n" +"If enabled, this parameter also sets a G-code variable named " +"chamber_temperature, which can be used to pass the desired chamber " +"temperature to your print start macro, or a heat soak macro like this: " +"PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may " +"be useful if your printer does not support M141/M191 commands, or if you " +"desire to handle heat soaking in the print start macro if no active chamber " +"heater is installed." msgstr "" +"對於 ABS、ASA、PC 和 PA 等高溫材料，較高的機箱溫度能有效抑制或減少翹曲，並可" +"能提升層間結合強度。然而，較高的機箱溫度也會降低 ABS 和 ASA 的空氣過濾效率。" +"對於 PLA、PETG、TPU、PVA 和其他低溫材料，建議將此選項停用（設為 0），因機箱溫" +"度應保持較低，以避免因材料在熱端軟化而導致擠出機堵塞。啟用此選項後，會設置一" +"個名為 chamber_temperature 的 G-code 變數，可用於將所需的機箱溫度傳遞給列印開" +"始宏，或像以下的熱浸泡宏（預熱）：PRINT_START (其他變數) " +"CHAMBER_TEMP=[chamber_temperature]。這對於不支援 M141/M191 指令的列印設備，或" +"者希望在列印開始宏中處理熱浸泡（預熱）但未安裝主動機箱加熱器的情況下非常實" +"用。" -msgid "Nozzle temperature for layers after the initial one" +msgid "Nozzle temperature for layers after the initial one." msgstr "除首層外的其它層的噴嘴溫度" msgid "Detect thin wall" @@ -12922,25 +15523,25 @@ msgstr "檢查薄壁" msgid "" "Detect thin wall which can't contain two line width. And use single line to " -"print. Maybe printed not very well, because it's not closed loop" +"print. Maybe printed not very well, because it's not closed loop." msgstr "" "檢查無法容納兩條走線的薄壁。使用單條走線列印。可能會打地不是很好，因為走線不" -"再閉合。" +"再閉合" msgid "" -"This gcode is inserted when change filament, including T command to trigger " -"tool change" -msgstr "換料時插入的G-code，包括T命令。" +"This G-code is inserted when filament is changed, including T commands to " +"trigger tool change." +msgstr "換料時插入的 G-code，包括 T 命令" -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "" +msgid "This G-code is inserted when the extrusion role is changed." +msgstr "此 G-code 會在擠出模式切換時插入" msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over " "the nozzle diameter." msgstr "頂面的線寬。如果以%表示，它將以噴嘴直徑為基準來計算。" -msgid "Speed of top surface infill which is solid" +msgid "Speed of top surface infill which is solid." msgstr "頂面實心填充的速度" msgid "Top shell layers" @@ -12949,7 +15550,7 @@ msgstr "頂部殼體層數" msgid "" "This is the number of solid layers of top shell, including the top surface " "layer. When the thickness calculated by this value is thinner than top shell " -"thickness, the top shell layers will be increased" +"thickness, the top shell layers will be increased." msgstr "" "頂部殼體實心層層數，包括頂面。當由該層數計算的厚度小於頂部殼體厚度，切片時會" "增加頂部殼體的層數" @@ -12960,53 +15561,85 @@ msgstr "頂部殼體層數" msgid "Top shell thickness" msgstr "頂部殼體厚度" -#, fuzzy msgid "" "The number of top solid layers is increased when slicing if the thickness " "calculated by top shell layers is thinner than this value. This can avoid " "having too thin shell when layer height is small. 0 means that this setting " -"is disabled and thickness of top shell is absolutely determained by top " -"shell layers" +"is disabled and thickness of top shell is absolutely determined by top shell " +"layers." msgstr "" -"如果由頂部殼體層數算出的厚度小於這個數值，那麼切片時將自動增加頂部殼體層數。" -"這能夠避免當層高很小時，頂部殼體過薄。0 表示關閉這個設定，同時頂部殼體的厚度" -"完全由頂部殼體層數決定" +"當切片時，如果通過頂部殼層計算的厚度小於設定值，將自動增加頂部實心層的數量，" +"以避免層高較小時頂部殼層過薄。若設為 0，則停用此功能，頂部殼層厚度完全由設定" +"的頂部殼層數決定" -msgid "Speed of travel which is faster and without extrusion" -msgstr "空駛的速度。空駛是無擠出量的快速移動。" +msgid "Top surface density" +msgstr "" + +msgid "" +"Density of top surface layer. A value of 100% creates a fully solid, smooth " +"top layer. Reducing this value results in a textured top surface, according " +"to the chosen top surface pattern. A value of 0% will result in only the " +"walls on the top layer being created. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion." +msgstr "" + +msgid "Bottom surface density" +msgstr "" + +msgid "" +"Density of the bottom surface layer. Intended for aesthetic or functional " +"purposes, not to fix issues such as over-extrusion.\n" +"WARNING: Lowering this value may negatively affect bed adhesion." +msgstr "" + +msgid "Speed of travel which is faster and without extrusion." +msgstr "空駛的速度。空駛是無擠出量的快速移動" msgid "Wipe while retracting" msgstr "回抽時擦拭" msgid "" -"Move nozzle along the last extrusion path when retracting to clean leaked " -"material on nozzle. This can minimize blob when print new part after travel" +"Move nozzle along the last extrusion path when retracting to clean any " +"leaked material on the nozzle. This can minimize blobs when printing a new " +"part after traveling." msgstr "" -"當回抽時，讓噴嘴沿著前面的走線方向繼續移動，清除掉噴嘴上的漏料。這能夠避免空" -"駛結束列印新的區域時產生斑點。" +"回抽時讓噴嘴沿著最後的擠出路徑移動，清理噴嘴上的洩漏材料。此功能可減少移動後" +"列印新區域時材料堆積的情況" msgid "Wipe Distance" msgstr "擦拭距離" msgid "" -"Discribe how long the nozzle will move along the last path when " -"retracting. \n" +"Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the " "extruder/filament retraction settings are, a retraction move may be needed " -"to retract the remaining filament. \n" +"to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform " "any excess retraction before the wipe, else it will be performed after." msgstr "" +"描述在回抽時噴嘴沿最後路徑移動的距離。\n" +"\n" +"根據擦拭操作持續的時間、擠出機/線材回抽設定的速度和距離，可能需要額外的回抽來" +"收回剩餘的線材。\n" +"\n" +"在以下的『擦拭前的回抽量』設定中設置一個值，將在擦拭之前執行任何額外的回抽操" +"作；否則，將在擦拭之後執行。" msgid "" "The wiping tower can be used to clean up the residue on the nozzle and " "stabilize the chamber pressure inside the nozzle, in order to avoid " "appearance defects when printing objects." msgstr "" -"擦拭塔可以用來清理噴嘴上的殘留料和讓噴嘴內部的腔壓達到穩定狀態，以避免列印物" -"體時出現外觀瑕疵。" +"換料塔的功能是用於清除噴嘴上的殘留物，同時穩定噴嘴內的壓力，從而避免列印物件" +"時出現外觀瑕疵。" + +msgid "Internal ribs" +msgstr "" + +msgid "Enable internal ribs to increase the stability of the prime tower." +msgstr "" msgid "Purging volumes" msgstr "沖刷體積" @@ -13017,22 +15650,27 @@ msgstr "沖刷量乘數" msgid "" "The actual flushing volumes is equal to the flush multiplier multiplied by " "the flushing volumes in the table." -msgstr "實際沖刷量等於沖刷量乘數乘以表格單元中的沖刷量" +msgstr "實際沖刷量等於沖刷量乘數乘以表格單元中的沖刷量。" msgid "Prime volume" msgstr "清理量" msgid "The volume of material to prime extruder on tower." -msgstr "擦拭塔上的清理量" +msgstr "換料塔上的清理量。" -msgid "Width of prime tower" -msgstr "擦拭塔寬度" +msgid "Width of the prime tower." +msgstr "換料塔寬度" msgid "Wipe tower rotation angle" -msgstr "擦拭塔旋轉角度" +msgstr "換料塔旋轉角度" -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "擦拭塔相對於 x 軸的旋轉角度。" +msgid "Wipe tower rotation angle with respect to X axis." +msgstr "換料塔相對於 x 軸的旋轉角度。" + +msgid "" +"Brim width of prime tower, negative number means auto calculated width based " +"on the height of prime tower." +msgstr "" msgid "Stabilization cone apex angle" msgstr "穩定錐形頂角" @@ -13040,17 +15678,12 @@ msgstr "穩定錐形頂角" msgid "" "Angle at the apex of the cone that is used to stabilize the wipe tower. " "Larger angle means wider base." -msgstr "圓錐體頂點處的角度，用於穩定擦拭塔。 更大的角度意味著更寬的底座。" - -msgid "Wipe tower purge lines spacing" -msgstr "擦拭塔線距" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "擦拭塔上的線距。" +msgstr "圓錐體頂點處的角度，用於穩定換料塔。 更大的角度意味著更寬的底座。" msgid "Maximum wipe tower print speed" -msgstr "" +msgstr "換料塔最快列印速度" +#, fuzzy msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe " "tower sparse layers. When purging, if the sparse infill speed or calculated " @@ -13065,25 +15698,66 @@ msgid "" "the force with which the nozzle collides with any blobs that may have formed " "on the wipe tower.\n" "\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure " +"Before increasing this parameter beyond the default of 90 mm/s, make sure " "your printer can reliably bridge at the increased speeds and that ooze when " "tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used " "regardless of this setting." msgstr "" +"在換料塔中和換料塔稀疏層時的最快列印速度。在列印時，如果稀疏填充速度或從線材" +"最大體積速度計算出的速度較低，則將使用較低的速度。\n" +"\n" +"在列印稀疏層時，如果內部周界速度或從線材最大體積速度計算出的速度較低，則將使" +"用較低的速度。\n" +"\n" +"提高此速度可能會影響塔的穩定性，並增加噴嘴與換料塔上斑點的碰撞力。\n" +"\n" +"在將此參數提高於預設值 90mm/s 以上之前，請確保您的印表設備能夠可靠地在更高的" +"速度下橋接，並且工具更換時的溢出能良好的被控制。\n" +"\n" +"對於換料塔外部周邊，無論此設定如何，都使用內部周邊速度。" -msgid "Wipe tower extruder" -msgstr "擦拭塔擠出機" +msgid "Wall type" +msgstr "" + +msgid "" +"Wipe tower outer wall type.\n" +"1. Rectangle: The default wall type, a rectangle with fixed width and " +"height.\n" +"2. Cone: A cone with a fillet at the bottom to help stabilize the wipe " +"tower.\n" +"3. Rib: Adds four ribs to the tower wall for enhanced stability." +msgstr "" + +msgid "Extra rib length" +msgstr "" + +msgid "" +"Positive values can increase the size of the rib wall, while negative values " +"can reduce the size. However, the size of the rib wall can not be smaller " +"than that determined by the cleaning volume." +msgstr "" + +msgid "Rib width" +msgstr "" + +msgid "Rib width." +msgstr "" + +msgid "Fillet wall" +msgstr "" + +msgid "The wall of prime tower will fillet." +msgstr "" msgid "" "The extruder to use when printing perimeter of the wipe tower. Set to 0 to " "use the one that is available (non-soluble would be preferred)." msgstr "" -"列印擦拭塔周長時使用的擠出機。設置為 0 將使用唯一的擠出機（盡量使用不可溶的材" +"列印換料塔周長時使用的擠出機。設置為 0 將使用唯一的擠出機（盡量使用不可溶的材" "料）。" -#, fuzzy msgid "Purging volumes - load/unload volumes" msgstr "清理量 - 進料/退料 量" @@ -13092,37 +15766,45 @@ msgid "" "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" -"可保存所需的體積，用於更改每個擦拭塔上工具所使用的 from/to 體積 。這些值用於" -"簡化完全沖刷體積的建立。" +"此資料記錄了換料塔每次切換所需的體積，並用於簡化後續完整沖洗體積的計算。" + +msgid "Skip points" +msgstr "" + +msgid "The wall of prime tower will skip the start points of wipe path." +msgstr "" + +msgid "Infill gap" +msgstr "" + +msgid "Infill gap." +msgstr "" -#, fuzzy msgid "" "Purging after filament change will be done inside objects' infills. This may " "lower the amount of waste and decrease the print time. If the walls are " "printed with transparent filament, the mixed color infill will be seen " "outside. It will not take effect, unless the prime tower is enabled." msgstr "" -"多色列印換色後的廢料會被用來列印物件的填充。這樣可以減少線材浪費和縮短列印時" -"間，但是如果物件的內外牆是採用透明線材列印的，則可以從模型外觀上看到內部的混" -"色廢料。該功能只有在啟用擦拭塔的時候才生效。" +"更換線材後的沖洗動作將在物件的填充區域內進行，可減少材料浪費並縮短列印時間。" +"然而，如果牆體使用透明線材，混合色的填充可能會透過牆體被看到。此功能需啟用換" +"料塔後才會生效。" -#, fuzzy msgid "" "Purging after filament change will be done inside objects' support. This may " "lower the amount of waste and decrease the print time. It will not take " "effect, unless the prime tower is enabled." msgstr "" -"多色列印換色後的廢料會被用來列印物件的支撐。這樣可以減少線材浪費和縮短列印時" -"間。該功能只有在啟用擦拭塔的時候才生效。" +"更換線材後的沖洗動作將在物件的支撐結構內進行，可減少材料浪費並縮短列印時間。" +"然而，此功能需啟用換料塔後才會生效。" -#, fuzzy msgid "" "This object will be used to purge the nozzle after a filament change to save " -"filament and decrease the print time. Colours of the objects will be mixed " -"as a result. It will not take effect, unless the prime tower is enabled." +"filament and decrease the print time. Colors of the objects will be mixed as " +"a result. It will not take effect unless the prime tower is enabled." msgstr "" -"多色列印換色後的廢料會被用來列印這個物件。這樣可以減少線材浪費和縮短列印時" -"間，但是這個物件的外觀會是混色的。該功能只有在啟用擦拭塔的時候才生效。" +"此物件將用於更換線材後進行噴嘴清洗，從而節省線材並縮短列印時間。但物件的顏色" +"會因此被混合。此功能需啟用換料塔後才會生效。" msgid "Maximal bridging distance" msgstr "最大橋接距離" @@ -13130,28 +15812,59 @@ msgstr "最大橋接距離" msgid "Maximal distance between supports on sparse infill sections." msgstr "稀疏填充截面上的支撐之間的最大距離。" +msgid "Wipe tower purge lines spacing" +msgstr "換料塔線距" + +msgid "Spacing of purge lines on the wipe tower." +msgstr "換料塔上的線距。" + +msgid "Extra flow for purging" +msgstr "額外換料流量" + +msgid "" +"Extra flow used for the purging lines on the wipe tower. This makes the " +"purging lines thicker or narrower than they normally would be. The spacing " +"is adjusted automatically." +msgstr "" +"讓換料塔在清理時輸出額外流量。這會使列印線比正常情況更粗或更細。間距會自動調" +"整。" + +msgid "Idle temperature" +msgstr "閒置溫度" + +msgid "" +"Nozzle temperature when the tool is currently not used in multi-tool setups. " +"This is only used when 'Ooze prevention' is active in Print Settings. Set to " +"0 to disable." +msgstr "" +"當工具頭在多工具頭設置中未使用時的噴嘴溫度。僅在『列印設定』中啟用『防止漏" +"料』時有效。設置 0 為停用。" + msgid "X-Y hole compensation" msgstr "X-Y 孔洞尺寸補償" +#, fuzzy msgid "" -"Holes of object will be grown or shrunk in XY plane by the configured value. " -"Positive value makes holes bigger. Negative value makes holes smaller. This " -"function is used to adjust size slightly when the object has assembling issue" +"Holes in objects will expand or contract in the XY plane by the configured " +"value. Positive values make holes bigger, negative values make holes " +"smaller. This function is used to adjust sizes slightly when the objects " +"have assembling issues." msgstr "" -"垂直的孔洞的尺寸將在X-Y方向收縮或拓展特定值。正值代表擴大孔洞。負值代表縮小孔" -"洞。這個功能通常在模型有裝配問題時微調尺寸" +"垂直的孔洞的尺寸將在 XY 方向收縮或拓展特定值。正值代表擴大孔洞。負值代表縮小" +"孔洞。這個功能通常在模型有裝配問題時微調尺寸" msgid "X-Y contour compensation" msgstr "X-Y 外輪廓尺寸補償" +#, fuzzy msgid "" -"Contour of object will be grown or shrunk in XY plane by the configured " -"value. Positive value makes contour bigger. Negative value makes contour " -"smaller. This function is used to adjust size slightly when the object has " -"assembling issue" +"Contours of objects will expand or contract in the XY plane by the " +"configured value. Positive values make contours bigger, negative values make " +"contours smaller. This function is used to adjust sizes slightly when the " +"objects have assembling issues." msgstr "" -"模型外輪廓的尺寸將在X-Y方向收縮或拓展特定值。正值代表擴大。負值代表縮小。這個" -"功能通常在模型有裝配問題時微調尺寸" +"模型外輪廓的尺寸將在 XY 方向收縮或拓展特定值。正值代表擴大。負值代表縮小。這" +"個功能通常在模型有裝配問題時微調尺寸" msgid "Convert holes to polyholes" msgstr "將圓孔轉換為多邊形孔" @@ -13162,9 +15875,9 @@ msgid "" "compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" -"搜索跨越多層的近似圓形孔，並將幾何形狀轉換為多邊形孔。使用噴嘴尺寸和（最大）" -"直徑來計算多邊形孔。\n" -"參見http://hydraraptor.blogspot.com/2011/02/polyholes.html" +"尋找橫跨多層的近似圓形孔洞，並將其幾何形狀轉換為多邊形孔。多邊形孔的計算將根" +"據噴嘴尺寸及最大直徑進行。\n" +"更多的說明請參閱：https://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" msgstr "偵測多邊形孔邊緣" @@ -13173,60 +15886,60 @@ msgstr "偵測多邊形孔邊緣" msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " +"be on the circle circumference. This setting allows you some leeway to " "broaden the detection.\n" "In mm or in % of the radius." msgstr "" -"點到圓半徑的最大偏差。\n" -"由於圓柱體通常被導出為大小不同的三角形，因此點可能不在圓周上。\n" -"此設定允許有一些餘地來擴大偵測範圍。\n" -"以 mm 或半徑的百分比 ％％ 表示。" +"點與圓估算半徑的最大偏差範圍。\n" +"由於圓柱體在匯出時通常由不同大小的三角形組成，點可能不會完全位於圓周上。此設" +"定允許一定的容差，以便擴大檢測範圍。\n" +"該值可使用毫米或半徑的百分比來表示。" msgid "Polyhole twist" msgstr "扭曲多邊形孔" msgid "Rotate the polyhole every layer." -msgstr "依層旋轉多邊形孔" +msgstr "依層旋轉多邊形孔。" -#, fuzzy msgid "G-code thumbnails" -msgstr "G-code 縮圖尺寸" +msgstr "G-code 縮圖" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"將被儲存到 .gcode 和 .sl1/.sl1s 檔案中圖片尺寸，格式如下：\"XxY, XxY, ...\"" +"設定將存儲於 .gcode 和 .sl1 / .sl1s 檔案中，其圖片尺寸，格式為：「XxY, " +"XxY, ...」" msgid "Format of G-code thumbnails" msgstr "G-code 縮圖的格式" msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" +"QOI for low memory firmware." msgstr "G-code 縮圖的格式：PNG 品質最佳，JPG 檔案最小，QOI 最低記憶體韌體" msgid "Use relative E distances" msgstr "使用相對 E 距離" msgid "" -"Relative extrusion is recommended when using \"label_objects\" option.Some " -"extruders work better with this option unckecked (absolute extrusion mode). " +"Relative extrusion is recommended when using \"label_objects\" option. Some " +"extruders work better with this option unchecked (absolute extrusion mode). " "Wipe tower is only compatible with relative mode. It is recommended on most " -"printers. Default is checked" +"printers. Default is checked." msgstr "" +"使用『label_objects』選項時，建議啟用相對擠出模式。一些擠出機在使用絕對擠出模" +"式（取消勾選）時運行效果會更好。換料塔僅支援相對擠出模式，這也是大多數列印設" +"備的建議模式。預設為啟用相對模式" msgid "" "Classic wall generator produces walls with constant extrusion width and for " "very thin areas is used gap-fill. Arachne engine produces walls with " -"variable extrusion width" +"variable extrusion width." msgstr "" "經典牆產生器產生的牆走線具有一致的擠出寬度，對狹窄區域使用填縫。Arachne 引擎" "則產生變線寬的牆走線" -msgid "Classic" -msgstr "經典" - msgid "Arachne" msgstr "Arachne" @@ -13236,10 +15949,10 @@ msgstr "牆過渡長度" msgid "" "When transitioning between different numbers of walls as the part becomes " "thinner, a certain amount of space is allotted to split or join the wall " -"segments. It's expressed as a percentage over nozzle diameter" +"segments. It's expressed as a percentage over nozzle diameter." msgstr "" -"當零件逐漸變薄導致牆的層數發生變化時，需要在過渡段分配一定的空間來分割和連接" -"牆走線。參數值表示為相對於噴嘴直徑的百分比" +"當零件變薄需要切換牆體數量時，系統會分配一定空間用於分割或合併牆段。此空間以" +"噴嘴直徑的百分比表示" msgid "Wall transitioning filter margin" msgstr "牆過渡過濾間距" @@ -13251,12 +15964,12 @@ msgid "" "margin reduces the number of transitions, which reduces the number of " "extrusion starts/stops and travel time. However, large extrusion width " "variation can lead to under- or overextrusion problems. It's expressed as a " -"percentage over nozzle diameter" +"percentage over nozzle diameter." msgstr "" -"防止特定厚度變化規律的局部在多一層牆和少一層牆之間來迴轉換。這個參數將擠壓寬" -"度的範圍擴大到[牆最小寬度-參數值, 2*牆最小寬度+參數值]。增大參數可以減少轉換" -"的次數，從而減少擠出開始/停止和空駛的時間。然而，大的擠出寬度變化會導致過擠出" -"或欠擠出的問題。參數值表示為相對於噴嘴直徑的百分比" +"防止牆體數量在多出一層與少一層之間頻繁切換。此邊界擴展了可接受的擠出寬度範" +"圍，範圍為 [最小牆寬 - 邊界, 2 倍最小牆寬 + 邊界]。增大邊界可以減少切換次數，" +"從而減少擠出啟停和移動時間。但過大的擠出寬度變化可能引發欠擠或過擠問題。此參" +"數以噴嘴直徑的百分比表示" msgid "Wall transitioning threshold angle" msgstr "牆過渡臨界值角度" @@ -13266,9 +15979,9 @@ msgid "" "shape with an angle greater than this setting will not have transitions and " "no walls will be printed in the center to fill the remaining space. Reducing " "this setting reduces the number and length of these center walls, but may " -"leave gaps or overextrude" +"leave gaps or overextrude." msgstr "" -"何時在偶數和奇數牆層數之間創建過渡段。角度大於這個臨界值的楔形將不創建過渡" +"何時在偶數和奇數牆層數之間建立過渡段。角度大於這個臨界值的楔形將不建立過渡" "段，並且不會在楔形中心列印牆走線以填補剩餘空間。減小這個數值能減少中心牆走線" "的數量和長度，但可能會導致間隙或者過擠出" @@ -13277,7 +15990,7 @@ msgstr "牆分布計數" msgid "" "The number of walls, counted from the center, over which the variation needs " -"to be spread. Lower values mean that the outer walls don't change in width" +"to be spread. Lower values mean that the outer walls don't change in width." msgstr "" "從中心開始計算的牆層數，線寬變化需要分布在這些牆走線上。較低的數值意味著外牆" "寬度更不易被改變" @@ -13287,26 +16000,28 @@ msgstr "最小特徵尺寸" msgid "" "Minimum thickness of thin features. Model features that are thinner than " -"this value will not be printed, while features thicker than the Minimum " -"feature size will be widened to the Minimum wall width. It's expressed as a " -"percentage over nozzle diameter" +"this value will not be printed, while features thicker than than this value " +"will be widened to the minimum wall width. It's expressed as a percentage " +"over nozzle diameter." msgstr "" -"薄壁特徵的最小厚度。比這個數值還薄的特徵將不被列印，而比最小特徵厚度還厚的特" -"征將被加寬到牆最小寬度。參數值表示為相對噴嘴直徑的百分比" msgid "Minimum wall length" -msgstr "" +msgstr "最短牆長" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which " "could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent " -"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the " +"visual gaps on the outside of the model. Adjust 'One wall threshold' in the " "Advanced settings below to adjust the sensitivity of what is considered a " -"top-surface. 'One wall threshold' is only visibile if this setting is set " +"top-surface. 'One wall threshold' is only visible if this setting is set " "above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" +"調整此參數以避免列印短小且未封閉的牆體，這可能會延長列印時間。參數值越高，移" +"除的牆體會越多且越長。注意：為避免模型外表面出現視覺裂縫，此設定不會影響頂面" +"和底面。若需調整頂面判定的靈敏度，可修改進階設定中的『單層牆閾值』。『單層牆" +"閾值』僅在此設置超過預設值 0.5 或啟用了單層牆頂面功能時可用。" msgid "First layer minimum wall width" msgstr "首層牆最小線寬" @@ -13316,7 +16031,7 @@ msgid "" "recommended to be set to the same size as the nozzle. This adjustment is " "expected to enhance adhesion." msgstr "" -"應用於首層的牆最小線寬，建議設定與噴嘴尺寸相同。這種調整有助於增強附著力。" +"套用於首層的牆最小線寬，建議設定與噴嘴尺寸相同。這種調整有助於增強附著力。" msgid "Minimum wall width" msgstr "牆最小線寬" @@ -13325,29 +16040,27 @@ msgid "" "Width of the wall that will replace thin features (according to the Minimum " "feature size) of the model. If the Minimum wall width is thinner than the " "thickness of the feature, the wall will become as thick as the feature " -"itself. It's expressed as a percentage over nozzle diameter" +"itself. It's expressed as a percentage over nozzle diameter." msgstr "" -"用於替換模型細小特徵（根據最小特徵尺寸）的牆線寬。如果牆最小線寬小於最小特徵" -"的厚度，則牆將變得和特徵本身一樣厚。參數值表示為相對噴嘴直徑的百分比" +"設定替代模型中細薄特徵（依據最小特徵尺寸）的牆體寬度。若最小牆寬小於特徵厚" +"度，牆體將與特徵的厚度一致。此值以噴嘴直徑的百分比表示" msgid "Detect narrow internal solid infill" msgstr "識別狹窄內部實心填充" msgid "" -"This option will auto detect narrow internal solid infill area. If enabled, " -"concentric pattern will be used for the area to speed printing up. " -"Otherwise, rectilinear pattern is used defaultly." +"This option will auto-detect narrow internal solid infill areas. If enabled, " +"the concentric pattern will be used for the area to speed up printing. " +"Otherwise, the rectilinear pattern will be used by default." msgstr "" -"此選項用於自動識別內部狹窄的實心填充。開啟後，將對狹窄實心區域使用同心填充加" -"快列印速度。否則使用預設的直線填充。" +"此選項可自動檢測狹窄的內部實心填充區域。啟用後，系統會採用同心圖案以提升列印" +"速度；若未啟用，則預設使用直線圖案進行填充。" -#, fuzzy msgid "invalid value " msgstr "無效值" -#, fuzzy msgid "Invalid value when spiral vase mode is enabled: " -msgstr "花瓶模式時無效值：" +msgstr "值於螺旋花瓶模式無效：" msgid "too large line width " msgstr "線寬過大" @@ -13355,46 +16068,231 @@ msgstr "線寬過大" msgid " not in range " msgstr " 不在合理的區間" -msgid "Minimum save" -msgstr "" +msgid "Export 3MF" +msgstr "匯出為 3MF 檔案" -msgid "export 3mf with minimum size." +msgid "Export project as 3MF." +msgstr "將專案匯出為 3MF 檔案。" + +msgid "Export slicing data" +msgstr "匯出切片資料" + +msgid "Export slicing data to a folder." +msgstr "將列印切片資料匯出至指定資料夾。" + +msgid "Load slicing data" +msgstr "載入切片資料" + +msgid "Load cached slicing data from directory." +msgstr "從資料夾載入快取的切片資料" + +msgid "Export STL" +msgstr "匯出為 STL 檔案" + +msgid "Export the objects as single STL." +msgstr "將所有物件匯出為單一 STL 檔案。" + +msgid "Export multiple STLs" +msgstr "匯出為多個 STL 檔案" + +msgid "Export the objects as multiple STLs to directory." +msgstr "將物件匯出為多個 STL 檔案至指定資料夾" + +msgid "Slice" +msgstr "切片" + +msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" +msgstr "切片板選項：0 代表所有板，i 代表第 i 塊板，其餘則為無效輸入" + +msgid "Show command help." +msgstr "顯示指令使用說明。" + +msgid "UpToDate" +msgstr "保持最新狀態" + +msgid "Update the config values of 3MF to latest." +msgstr "更新 3MF 配置值至最新版本。" + +msgid "downward machines check" +msgstr "相容設備檢測" + +msgid "" +"check whether current machine downward compatible with the machines in the " +"list." +msgstr "檢查目前機器是否與列表中的機器向下相容" + +msgid "Load default filaments" +msgstr "載入預設列印耗材" + +msgid "Load first filament as default for those not loaded." +msgstr "將第一種耗材設為預設，以供未載入的項目使用" + +msgid "Minimum save" +msgstr "最低保存" + +msgid "Export 3MF with minimum size." msgstr "匯出最小尺寸的 3mf。" +msgid "mtcpp" +msgstr "mtcpp" + +msgid "max triangle count per plate for slicing." +msgstr "每片板的最大切片三角形數量。" + +msgid "mstpp" +msgstr "mstpp" + +msgid "max slicing time per plate in seconds." +msgstr "每片板的最大切片時間（秒）。" + msgid "No check" msgstr "不檢查" -#, fuzzy -msgid "Do not run any validity checks, such as gcode path conflicts check." +msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "不要執行任何有效性檢查，如 G-code 路徑衝突檢查。" +msgid "Normative check" +msgstr "規範符合性檢測" + +msgid "Check the normative items." +msgstr "檢查符合規範的項目。" + +msgid "Output Model Info" +msgstr "輸出模型資訊" + +msgid "Output the model's information." +msgstr "輸出模型資訊。" + +msgid "Export Settings" +msgstr "匯出設定" + +msgid "Export settings to a file." +msgstr "將設定匯出至指定資料夾。" + +msgid "Send progress to pipe" +msgstr "將進度傳送到 Pipe" + +msgid "Send progress to pipe." +msgstr "將進度傳送到 Pipe。" + +msgid "Arrange Options" +msgstr "佈局選項" + +msgid "Arrange options: 0-disable, 1-enable, others-auto" +msgstr "佈局選項：0 代表停用，1 代表啟用，其他則為自動模式" + +msgid "Repetition count" +msgstr "重複次數" + +msgid "Repetition count of the whole model." +msgstr "整個模型的重複次數" + msgid "Ensure on bed" msgstr "確認在列印板上" msgid "" -"Lift the object above the bed when it is partially below. Disabled by default" -msgstr "當物件部分位於列印板的下方時，將其提升到列印板的上方。預設情況下禁用" +"Lift the object above the bed when it is partially below. Disabled by " +"default." +msgstr "當物件部分位於列印板的下方時，將其提升到列印板的上方。預設情況下停用" + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"將提供的模型排列在整個載台中，並將它們合併為一個模型，以便同時執行一次操作。" + +msgid "Convert Unit" +msgstr "單位轉換" + +msgid "Convert the units of model." +msgstr "變更模型的度量單位" msgid "Orient Options" -msgstr "" +msgstr "方向設定" msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "" +msgstr "方向設定：0-關閉，1-開啟，其它-自動模式" msgid "Rotation angle around the Z axis in degrees." msgstr "繞 Z 軸的旋轉角度（以度為單位）。" +msgid "Rotate around X" +msgstr "" + +msgid "Rotation angle around the X axis in degrees." +msgstr "" + msgid "Rotate around Y" msgstr "繞 Y 旋轉" msgid "Rotation angle around the Y axis in degrees." -msgstr "繞 Y 軸的旋轉角度（以度為單位）" +msgstr "繞 Y 軸的旋轉角度（以度為單位）。" + +msgid "Scale the model by a float factor." +msgstr "依浮點數比例縮放模型" + +msgid "Load General Settings" +msgstr "載入一般設定" + +msgid "Load process/machine settings from the specified file." +msgstr "從指定檔案載入參數與機器設定" + +msgid "Load Filament Settings" +msgstr "載入列印耗材設定" + +msgid "Load filament settings from the specified file list." +msgstr "從指定的檔案清單載入耗材設定" + +msgid "Skip Objects" +msgstr "略過物件" + +msgid "Skip some objects in this print." +msgstr "在本次列印中略過部分物件" + +msgid "Clone Objects" +msgstr "複製物件" + +msgid "Clone objects in the load list." +msgstr "複製載入清單中的物件" + +msgid "Load uptodate process/machine settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate process/machine settings from the specified file when using " +"uptodate." +msgstr "當使用最新版本時，從指定檔案載入最新的參數與機器設定" + +msgid "Load uptodate filament settings when using uptodate" +msgstr "" + +msgid "" +"Load uptodate filament settings from the specified file when using uptodate." +msgstr "當使用最新版本時，從指定檔案載入最新的列印耗材設定" + +msgid "Downward machines check" +msgstr "" + +msgid "" +"If enabled, check whether current machine downward compatible with the " +"machines in the list." +msgstr "若啟用，則檢查目前機器是否與列表中的機器向下相容" + +msgid "downward machines settings" +msgstr "" + +msgid "The machine settings list needs to do downward checking." +msgstr "機器設定清單需執行向下相容性檢測" + +msgid "Load assemble list" +msgstr "載入組裝清單" + +msgid "Load assemble object list from config file." +msgstr "從設定檔載入組裝物件清單" -#, fuzzy msgid "Data directory" -msgstr "檔案路徑" +msgstr "檔案目錄" -#, fuzzy msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " @@ -13403,249 +16301,370 @@ msgstr "" "指定目錄用以載入或儲存設定檔。 這對於維護不同的設定檔或包含來自網路儲存的設定" "檔非常有用。" -msgid "Load custom gcode" +msgid "Output directory" +msgstr "輸出資料夾" + +msgid "Output directory for the exported files." +msgstr "用於存放匯出檔案的目錄。" + +msgid "Debug level" +msgstr "除錯模式等級" + +msgid "" +"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +msgstr "" +"設定除錯日誌級別。0：致命錯誤，1：錯誤，2：警告，3：資訊，4：除錯，5：追蹤\n" + +msgid "Enable timelapse for print" +msgstr "啟用列印過程縮時錄影" + +msgid "If enabled, this slicing will be considered using timelapse." +msgstr "若啟用，此次切片將使用縮時錄影模式" + +msgid "Load custom G-code" msgstr "載入自訂 G-code" -msgid "Load custom gcode from json" -msgstr "從 json 載入自訂 gcode" +msgid "Load custom G-code from json." +msgstr "從 json 載入自訂 G-code" -msgid "Current z-hop" +msgid "Load filament IDs" +msgstr "載入耗材識別碼" + +msgid "Load filament IDs for each object." msgstr "" -msgid "Contains z-hop present at the beginning of the custom G-code block." +msgid "Allow multiple colors on one plate" +msgstr "允許同塊板上使用多色列印" + +msgid "If enabled, Arrange will allow multiple colors on one plate." +msgstr "若啟用，佈局將允許同一板上使用多色列印" + +msgid "Allow rotation when arranging" +msgstr "允許在排列時進行旋轉調整" + +msgid "If enabled, Arrange will allow rotation when placing objects." +msgstr "若啟用，物件排列時將允許旋轉調整" + +msgid "Avoid extrusion calibrate region when arranging" +msgstr "在排列物件時避開擠出校正區域" + +msgid "" +"If enabled, Arrange will avoid extrusion calibrate region when placing " +"objects." +msgstr "若啟用，物件排列時將避開擠出校正區域" + +msgid "Skip modified G-code in 3MF" +msgstr "忽略 3MF 檔案內已修改的 G-code" + +msgid "Skip the modified G-code in 3MF from printer or filament presets." +msgstr "忽略 3MF 檔案內來自印表機或耗材預設的已修改 G-code" + +msgid "MakerLab name" +msgstr "MakerLab 名稱" + +msgid "MakerLab name to generate this 3MF." +msgstr "產生此 3MF 檔案時所使用的 MakerLab 名稱" + +msgid "MakerLab version" +msgstr "MakerLab 版本" + +msgid "MakerLab version to generate this 3MF." +msgstr "產生此 3MF 檔案時所使用的 MakerLab 版本" + +msgid "Metadata name list" +msgstr "中繼資料名稱清單" + +msgid "Metadata name list added into 3MF." +msgstr "新增至 3MF 檔案的中繼資料名稱清單" + +msgid "Metadata value list" +msgstr "中繼資料值清單" + +msgid "Metadata value list added into 3MF." +msgstr "新增至 3MF 檔案的中繼資料值清單" + +msgid "Allow 3MF with newer version to be sliced" msgstr "" +msgid "Allow 3MF with newer version to be sliced." +msgstr "允許對較新版本的 3MF 進行切片處理" + +msgid "Current Z-hop" +msgstr "目前 Z 抬升高度" + +msgid "Contains Z-hop present at the beginning of the custom G-code block." +msgstr "包含在自定義 G-code 區塊開頭的 Z 抬升動作。" + msgid "" "Position of the extruder at the beginning of the custom G-code block. If the " "custom G-code travels somewhere else, it should write to this variable so " -"PrusaSlicer knows where it travels from when it gets control back." +"Snapmaker Orca knows where it travels from when it gets control back." msgstr "" +"擠出機在自定義 G-code 區塊開頭的位置。如果自定義 G-code 將擠出機移動到其他位" +"置，應將該位置記錄到此變數中，以便 Snapmaker Orca 在恢復控制時了解擠出機的移動起" +"點。" msgid "" "Retraction state at the beginning of the custom G-code block. If the custom " "G-code moves the extruder axis, it should write to this variable so " -"PrusaSlicer deretracts correctly when it gets control back." +"Snapmaker Orca de-retracts correctly when it gets control back." msgstr "" +"自定義 G-code 區塊開始時的回抽狀態。如果自定義 G-code 移動了擠出軸，應將該狀" +"態記錄到此變數中，以確保 Snapmaker Orca 在恢復控制時能正確執行回抽恢復動作。" -msgid "Extra deretraction" -msgstr "" +msgid "Extra de-retraction" +msgstr "額外返回抽" -msgid "Currently planned extra extruder priming after deretraction." -msgstr "" +msgid "Currently planned extra extruder priming after de-retraction." +msgstr "目前計劃的額外擠出機加料，發生於回抽恢復後。" + +msgid "Absolute E position" +msgstr "絕對擠出值" + +msgid "" +"Current position of the extruder axis. Only used with absolute extruder " +"addressing." +msgstr "擠出機軸的目前位置。僅用於絕對擠出值。" msgid "Current extruder" -msgstr "" +msgstr "目前使用的擠出機" msgid "Zero-based index of currently used extruder." -msgstr "" +msgstr "目前使用的擠出機的索引，從 0 開始。" msgid "Current object index" -msgstr "" +msgstr "目前列印物件的索引" msgid "" "Specific for sequential printing. Zero-based index of currently printed " "object." -msgstr "" +msgstr "特定於序列列印。目前列印物件的索引，從 0 開始。" msgid "Has wipe tower" -msgstr "" +msgstr "有換料塔" msgid "Whether or not wipe tower is being generated in the print." -msgstr "" +msgstr "是否有產生換料塔。" msgid "Initial extruder" -msgstr "" +msgstr "初始擠出機" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_tool." -msgstr "" +msgstr "列印中使用的第一個擠出機的索引，從 0 開始。與 initial_tool 相同。" msgid "Initial tool" -msgstr "" +msgstr "初始工具頭" msgid "" "Zero-based index of the first extruder used in the print. Same as " "initial_extruder." -msgstr "" +msgstr "列印中使用的第一個擠出機的索引，從 0 開始。與 initial_extruder 相同。" msgid "Is extruder used?" -msgstr "" +msgstr "擠出機是否被使用?" -msgid "Vector of bools stating whether a given extruder is used in the print." -msgstr "" +msgid "" +"Vector of booleans stating whether a given extruder is used in the print." +msgstr "包含布林值的向量，用於指示每個擠出機是否在列印過程中被啟用。" + +msgid "Has single extruder MM priming" +msgstr "單擠出機多材料預熱" + +msgid "Are the extra multi-material priming regions used in this print?" +msgstr "這次列印是否使用了額外的多材料準備區域？" msgid "Volume per extruder" -msgstr "" +msgstr "各擠出機線材體積" msgid "Total filament volume extruded per extruder during the entire print." -msgstr "" +msgstr "整個列印過程中，每個噴頭擠出的線材總體積。" -msgid "Total toolchanges" -msgstr "" +msgid "Total tool changes" +msgstr "換色次數" -msgid "Number of toolchanges during the print." -msgstr "" +msgid "Number of tool changes during the print." +msgstr "列印期間工具頭變更次數。" msgid "Total volume" -msgstr "" +msgstr "總體積" msgid "Total volume of filament used during the entire print." -msgstr "" +msgstr "列印總線材體積。" msgid "Weight per extruder" -msgstr "" +msgstr "各擠出機擠出總重" msgid "" "Weight per extruder extruded during the entire print. Calculated from " "filament_density value in Filament Settings." -msgstr "" +msgstr "各擠出機擠出總重，依據線材密度計算。" msgid "Total weight" -msgstr "" +msgstr "總重" msgid "" "Total weight of the print. Calculated from filament_density value in " "Filament Settings." -msgstr "" +msgstr "列印總重，依據線材密度計算。" msgid "Total layer count" -msgstr "" +msgstr "總層數" msgid "Number of layers in the entire print." -msgstr "" +msgstr "列印總層數。" msgid "Number of objects" -msgstr "" +msgstr "物件數量" msgid "Total number of objects in the print." -msgstr "" +msgstr "列印總物件數量。" msgid "Number of instances" -msgstr "" +msgstr "實例數量" msgid "Total number of object instances in the print, summed over all objects." -msgstr "" +msgstr "列印中所有物件實例的總數，累計所有物件的數量。" msgid "Scale per object" -msgstr "" +msgstr "各物件縮放" +#, fuzzy msgid "" "Contains a string with the information about what scaling was applied to the " "individual objects. Indexing of the objects is zero-based (first object has " "index 0).\n" -"Example: 'x:100% y:50% z:100'." +"Example: 'x:100% y:50% z:100%'." msgstr "" +"包含各個物件所套用縮放比例資訊的字串。物件索引以 0 為起點（第一個物件的索引" +"為 0）。範例：x:100% y:50% z:100%。" msgid "Input filename without extension" -msgstr "" +msgstr "輸入檔名（不含副檔名）" msgid "Source filename of the first object, without extension." -msgstr "" +msgstr "第一個物件的原始檔名（不含副檔名）" +#, fuzzy msgid "" -"The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "" +"The vector has two elements: X and Y coordinate of the point. Values in mm." +msgstr "這個向量包含兩個元素：點的 x 和 y 座標，單位為毫米。" +#, fuzzy msgid "" -"The vector has two elements: x and y dimension of the bounding box. Values " +"The vector has two elements: X and Y dimension of the bounding box. Values " "in mm." -msgstr "" +msgstr "這個向量包含兩個元素：邊界的 x 和 y 尺寸，單位為mm。" msgid "First layer convex hull" -msgstr "" +msgstr "第一層凸包" msgid "" "Vector of points of the first layer convex hull. Each element has the " "following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "" +"第一層凸包的點向量。每個元素格式為：'[x, y]'（x 和 y 是以mm為單位的實數）。" msgid "Bottom-left corner of first layer bounding box" -msgstr "" +msgstr "第一層邊界左下角" msgid "Top-right corner of first layer bounding box" -msgstr "" +msgstr "第一層邊界右上角" msgid "Size of the first layer bounding box" -msgstr "" +msgstr "第一層邊界大小" msgid "Bottom-left corner of print bed bounding box" -msgstr "" +msgstr "列印平台邊界左下角" msgid "Top-right corner of print bed bounding box" -msgstr "" +msgstr "列印平台邊界右上角" msgid "Size of the print bed bounding box" -msgstr "" +msgstr "列印平台邊界大小" msgid "Timestamp" -msgstr "" +msgstr "時間戳記" msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "" +msgstr "yyyyMMdd-hhmmss 格式的目前時間字串。" msgid "Day" -msgstr "" +msgstr "天" msgid "Hour" -msgstr "" +msgstr "小時" msgid "Minute" -msgstr "" +msgstr "分" + +msgid "Second" +msgstr "秒" msgid "Print preset name" -msgstr "" +msgstr "列印預設名稱" msgid "Name of the print preset used for slicing." -msgstr "" +msgstr "切片使用的列印預設名稱。" msgid "Filament preset name" -msgstr "" +msgstr "線材預設名稱" msgid "" "Names of the filament presets used for slicing. The variable is a vector " "containing one name for each extruder." msgstr "" +"切片使用的各個擠出機的線材預設名稱。此變數是一個向量，包含每個擠出機相對應的" +"名稱。" msgid "Printer preset name" -msgstr "" +msgstr "列印設備預設名稱" msgid "Name of the printer preset used for slicing." -msgstr "" +msgstr "用於切片的列印設備預設名稱。" msgid "Physical printer name" -msgstr "" +msgstr "列印設備實際名稱" msgid "Name of the physical printer used for slicing." -msgstr "" +msgstr "用於切片的印表設備名稱。" + +msgid "Number of extruders" +msgstr "總擠出機數" + +msgid "" +"Total number of extruders, regardless of whether they are used in the " +"current print." +msgstr "總擠出機數，無論是否用於列印。" msgid "Layer number" -msgstr "" +msgstr "層數" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." -msgstr "" +msgstr "當層數 (第一層為一)" -msgid "Layer z" -msgstr "" +msgid "Layer Z" +msgstr "層 z 高" msgid "" "Height of the current layer above the print bed, measured to the top of the " "layer." -msgstr "" +msgstr "目前這一層距離熱床的高度，從層頂開始計算。" -msgid "Maximal layer z" -msgstr "" +msgid "Maximal layer Z" +msgstr "層的最大 Z 軸高度" msgid "Height of the last layer above the print bed." -msgstr "" +msgstr "最後一層距列印床的高度。" msgid "Filament extruder ID" -msgstr "" +msgstr "線材擠出機識別碼" msgid "The current extruder ID. The same as current_extruder." -msgstr "" +msgstr "目前的擠出機識別碼，與 current_extruder 一致。" -#, fuzzy msgid "Error in zip archive" msgstr "zip 檔案中存在錯誤" @@ -13661,9 +16680,6 @@ msgstr "正在產生填充走線" msgid "Detect overhangs for auto-lift" msgstr "偵測懸空區域為自動抬升做準備" -msgid "Generating support" -msgstr "正在產生支撐" - msgid "Checking support necessity" msgstr "正在檢查支撐必要性" @@ -13676,11 +16692,14 @@ msgstr "浮空懸臂" msgid "large overhangs" msgstr "大面積懸空" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "It seems object %s has %s. Please re-orient the object or enable support " "generation." -msgstr "似乎物件 %s 有 %s。請重新調整物件的方向或啟用支撐。" +msgstr "物件 %s 似乎有 %s。請重新調整物件的方向或啟用支撐。" + +msgid "Generating support" +msgstr "正在產生支撐" msgid "Optimizing toolpath" msgstr "正在最佳化走線" @@ -13688,144 +16707,116 @@ msgstr "正在最佳化走線" msgid "Slicing mesh" msgstr "正在切片網格" -#, fuzzy msgid "" "No layers were detected. You might want to repair your STL file(s) or check " "their size or thickness and retry.\n" msgstr "" -"沒有偵測到層。您可能需要修復 STL 檔案，或檢查模型尺寸、厚度等，之後再重試。\n" +"未檢測到任何列印層。請檢查您的 STL 檔案是否需要修復，或者確認其尺寸與厚度，然" +"後再重試。\n" -#, fuzzy msgid "" "An object's XY size compensation will not be used because it is also color-" "painted.\n" -"XY Size compensation can not be combined with color-painting." +"XY Size compensation cannot be combined with color-painting." msgstr "" "物件的 XY 尺寸補償不會生效，因為在此物件上做過上色操作。\n" "XY 尺寸補償不能與上色功能一起使用。" -#, fuzzy, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "支撐：正在產生 %d 層的走線路徑" +msgid "" +"An object has enabled XY Size compensation which will not be used because it " +"is also fuzzy skin painted.\n" +"XY Size compensation cannot be combined with fuzzy skin painting." +msgstr "" -msgid "Support: detect overhangs" -msgstr "支撐：正在偵測懸空面" +msgid "Object name" +msgstr "" msgid "Support: generate contact points" msgstr "支撐：正在產生接觸點" -msgid "Support: propagate branches" -msgstr "支撐：正在生長樹枝" - -msgid "Support: draw polygons" -msgstr "支撐：正在產生多邊形" - -msgid "Support: generate toolpath" -msgstr "支撐：正在產生走線路徑" - -#, fuzzy, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "支撐：正在產生 %d 層的多邊形" - -#, fuzzy, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "支撐：正在修補 %d 層的空洞" - -#, fuzzy, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "支撐：正在生長 %d 層的樹枝" - -#, fuzzy -msgid "" -"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." -msgstr "未知的檔案格式。輸入檔案的副檔名必須為 .stl、.obj 或 .amf（.xml）。" - msgid "Loading of a model file failed." msgstr "載入模型檔案失敗。" -msgid "The supplied file couldn't be read because it's empty" -msgstr "無法讀取提供的檔案，因為該檔案為空。" +msgid "Meshing of a model file failed or no valid shape." +msgstr "" + +msgid "The supplied file couldn't be read because it's empty" +msgstr "無法讀取提供的檔案，因為該檔案為空" + +msgid "" +"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." +msgstr "檔案格式未知。輸入的檔案必須是 .stl、.obj 或 .amf(.xml) 格式。" -#, fuzzy msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "未知的檔案格式。輸入檔案的副檔名必須為 .3mf 或 .zip .amf。" -msgid "Canceled" -msgstr "已取消" - -#, fuzzy msgid "load_obj: failed to parse" -msgstr "載入物件：無法分析" +msgstr "載入物件：解析失敗" msgid "load mtl in obj: failed to parse" -msgstr "" +msgstr "載入物件材質：解析失敗" -#, fuzzy msgid "The file contains polygons with more than 4 vertices." -msgstr "該檔案包含頂點超過 4 個的多邊形。" +msgstr "該檔案包含超過 4 個頂點的多邊形。" -#, fuzzy msgid "The file contains polygons with less than 2 vertices." -msgstr "該檔案包含頂點少於 2 個的多邊形。" +msgstr "該檔案包含少於 2 個頂點的多邊形。" msgid "The file contains invalid vertex index." msgstr "檔案包含無效的頂點索引。" -#, fuzzy msgid "This OBJ file couldn't be read because it's empty." msgstr "無法讀取此 OBJ 檔案，因為它是空的。" msgid "Flow Rate Calibration" -msgstr "流量比例校準" +msgstr "流量比例校正" msgid "Max Volumetric Speed Calibration" -msgstr "最大體積速度校準" +msgstr "最大體積速度校正" msgid "Manage Result" msgstr "管理結果" msgid "Manual Calibration" -msgstr "手動校準" +msgstr "手動校正" msgid "Result can be read by human eyes." msgstr "結果可由人眼讀取。" msgid "Auto-Calibration" -msgstr "自動校準" +msgstr "自動校正" -#, fuzzy msgid "We would use Lidar to read the calibration result" -msgstr "將使用微型雷射雷達來讀取校準結果。" +msgstr "將使用雷射雷達來讀取校正結果" msgid "Prev" msgstr "上一個" msgid "Recalibration" -msgstr "重新校準" +msgstr "重新校正" msgid "Calibrate" -msgstr "校準" +msgstr "校正" msgid "Finish" msgstr "完成" msgid "How to use calibration result?" -msgstr "如何使用校準結果？" +msgstr "如何使用校正結果？" msgid "" "You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "您可以在線材編輯中更改流量動態校準因子。" +msgstr "您可以在線材編輯中更改流量動態校正因子" -#, fuzzy msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" -"列印設備目前的韌體版本不支援校準。\n" +"列印設備目前的韌體版本不支援校正。\n" "請升級列印設備韌體。" msgid "Calibration not supported" -msgstr "不支援校準" +msgstr "不支援校正" msgid "Error desc" msgstr "錯誤描述" @@ -13842,77 +16833,75 @@ msgstr "流量比例" msgid "Max Volumetric Speed" msgstr "最大體積速度" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" -"Value step: >= %.3f)" +"Value step: >= %.3f" msgstr "" "請輸入有效值：\n" "起始值：>= %.1f\n" -"最終值：<= %.1f\n" -"結束值：> 起始值\n" +"終止值：<= %.1f\n" +"終止值：> 起始值\n" "步距：>= %.3f）" msgid "The name cannot be empty." msgstr "名稱不能為空。" #, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "" +msgid "The selected preset: %s was not found." +msgstr "找不到所選的預設：%s。" -#, fuzzy msgid "The name cannot be the same as the system preset name." msgstr "名稱不能與系統預設值名稱相同。" -#, fuzzy msgid "The name is the same as another existing preset name" -msgstr "該名稱與另一個現有預設值名稱相同。" +msgstr "該名稱與另一個現有預設值名稱相同" -#, fuzzy msgid "create new preset failed." -msgstr "新增預設值失敗" +msgstr "新增預設失敗。" + +#, c-format, boost-format +msgid "The selected preset: %s is not found." +msgstr "" + +#, c-format, boost-format +msgid "Could not find parameter: %s." +msgstr "" -#, fuzzy msgid "" "Are you sure to cancel the current calibration and return to the home page?" -msgstr "您確定要取消目前的校準並返回首頁嗎？" +msgstr "您確定要取消目前的校正並返回首頁嗎？" -#, fuzzy msgid "No Printer Connected!" msgstr "沒有連接列印設備！" -#, fuzzy msgid "Printer is not connected yet." msgstr "列印設備尚未連接。" msgid "Please select filament to calibrate." -msgstr "請選擇要校準的線材。" +msgstr "請選擇要校正的線材。" -#, fuzzy msgid "The input value size must be 3." -msgstr "輸入值大小必須為 3。" +msgstr "輸入值必須為 3。" msgid "" "This machine type can only hold 16 history results per nozzle. You can " "delete the existing historical results and then start calibration. Or you " "can continue the calibration, but you cannot create new calibration " -"historical results. \n" +"historical results.\n" "Do you still want to continue the calibration?" msgstr "" +"此機型每個噴嘴最多只能保存 16 條歷史記錄。您可以刪除現有記錄後再開始校正，或" +"者選擇繼續校正，但無法新增新的校正記錄。您確定要繼續校正嗎？" -#, fuzzy -msgid "Connecting to printer..." -msgstr "正在連接列印設備..." - -msgid "The failed test result has been dropped." -msgstr "測試失敗的結果已被刪除。" - -#, fuzzy -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "動態流量校準的結果已儲存至列印設備。" +#, c-format, boost-format +msgid "" +"Only one of the results with the same name: %s will be saved. Are you sure " +"you want to override the other results?" +msgstr "" #, c-format, boost-format msgid "" @@ -13920,48 +16909,59 @@ msgid "" "Only one of the results with the same name is saved. Are you sure you want " "to override the historical result?" msgstr "" +"已經有一個同名的歷史校正結果：%s。僅保存同名結果中的其中一個。確定要覆寫歷史" +"結果嗎？" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name(%s) must be unique when the filament " +"type, nozzle diameter, and nozzle flow are the same.\n" +"Are you sure you want to override the historical result?" +msgstr "" #, c-format, boost-format msgid "" "This machine type can only hold %d history results per nozzle. This result " "will not be saved." -msgstr "" +msgstr "此機型每個噴嘴只能儲存 %d 筆歷史記錄。此結果將不會被保存。" + +msgid "Connecting to printer..." +msgstr "正在連接列印設備..." + +msgid "The failed test result has been dropped." +msgstr "測試失敗的結果已被刪除。" + +msgid "Flow Dynamics Calibration result has been saved to the printer." +msgstr "動態流量校正的結果已儲存至列印設備" msgid "Internal Error" msgstr "內部錯誤" msgid "Please select at least one filament for calibration" -msgstr "請至少選擇一種線材進行校準。" +msgstr "請至少選擇一種線材進行校正" -#, fuzzy -msgid "Flow rate calibration result has been saved to preset" -msgstr "流量比例校準結果已儲存到預設值" +msgid "Flow rate calibration result has been saved to preset." +msgstr "流量比例校正結果已儲存到預設值" -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "最大體積速度校準結果已儲存到預設值" +msgid "Max volumetric speed calibration result has been saved to preset." +msgstr "最大體積速度校正結果已儲存到預設值" msgid "When do you need Flow Dynamics Calibration" -msgstr "在什麼情況下需要進行動態流量校準" +msgstr "在什麼情況下需要進行動態流量校正" -#, fuzzy msgid "" "We now have added the auto-calibration for different filaments, which is " "fully automated and the result will be saved into the printer for future " "use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the " "filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" +"2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the " "filament setting." msgstr "" -"我們現在已經為不同的列印線材新增了自動校準功能，該功能是完全自動化的，並且結" -"果將儲存在列印設備中以供將來使用。您只需要在以下有限情況下進行校準：\n" -"1. 如果您引入了不同品牌/型號的新列印線材，或者列印線材受潮；\n" -"2. 如果噴嘴磨損或更換了新的噴嘴；\n" -"3. 如果您在列印線材設定中更改了最大體積速度或列印溫度。" msgid "About this calibration" -msgstr "關於此校準" +msgstr "關於此校正" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" @@ -13982,38 +16982,49 @@ msgid "" "cause the result not exactly the same in each calibration. We are still " "investigating the root cause to do improvements with new updates." msgstr "" +"請參考我們的 Wiki 頁面，了解「流體動力校正」的詳細資訊。\n" +"\n" +"通常不需要進行校正。當您啟動單色/單材質列印，並在列印開始選單中勾選『流體動力" +"校正』選項時，列印設備將按照舊方式，在列印前校正耗材。當您啟動多色/多材質列印" +"時，列印設備將在每次耗材切換時使用預設的補償參數，這在大部分情況下都能得到良" +"好的結果。\n" +"\n" +"請注意，有些情況可能會導致校正結果不可靠，例如列印板上的黏著力不足。您可以通" +"過清洗印板板或塗抹膠水來改善黏著力。有關此主題的更多資訊，請參考我們的 " +"Wiki。\n" +"\n" +"在我們的測試中，校正結果存在約 10% 的誤差，這可能導致每次校正的結果不完全相" +"同。我們仍在調查根本原因，並將在新的更新中進行改進。" msgid "When to use Flow Rate Calibration" -msgstr "何時使用流量率校準" +msgstr "何時使用流量率校正" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion " "issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or " -"zits, or the layers seem thicker than expected and not uniform.\n" +"zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the " -"top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" +"top layer of the model, even when printing slowly\n" +"3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as " -"they should be." +"they should be" msgstr "" -"使用流量動態校準後，仍可能出現一些擠出問題，例如：\n" +"使用流量動態校正後，仍可能出現一些擠出問題，例如：\n" "1. 過度擠出：列印物體上有過多的線材，形成凸起或小球，或者層次看起來比預期的厚" "而且不均勻。\n" "2. 不足擠出：層次非常薄，填充強度不足，或者在緩慢列印時模型頂層有缺陷。\n" "3. 表面品質差：列印的表面看起來粗糙或不均勻。\n" "4. 結構穩固性差：列印物件容易斷裂，或者沒有應有的穩固性。" -#, fuzzy msgid "" "In addition, Flow Rate Calibration is crucial for foaming materials like LW-" "PLA used in RC planes. These materials expand greatly when heated, and " "calibration provides a useful reference flow rate." msgstr "" -"此外，對於像用於遙控飛機的輕質發泡 PLA（LW-PLA）這樣的發泡線材，流量率校準非" -"常重要。這些線材在加熱時會大幅膨脹，而校準提供了有用的流量率參考。" +"此外，對於像用於遙控飛機的輕質發泡 PLA（LW-PLA）這樣的發泡線材，流量率校正非" +"常重要。這些線材在加熱時會大幅膨脹，而校正提供了有用的流量率參考。" -#, fuzzy msgid "" "Flow Rate Calibration measures the ratio of expected to actual extrusion " "volumes. The default setting works well in Bambu Lab printers and official " @@ -14022,12 +17033,11 @@ msgid "" "you still see the listed defects after you have done other calibrations. For " "more details, please check out the wiki article." msgstr "" -"流量率校準測量預期擠出體積與實際擠出體積之間的比率。預設設定在 Bambu Lab 列印" -"設備和官方線材上表現良好，因為它們已經進行了預先校準和微調。對於普通的線材，" -"通常情況下，您不需要執行流量率校準，除非在完成其他校準後仍然看到上述列出的缺" +"流量率校正測量預期擠出體積與實際擠出體積之間的比率。預設設定在 Bambu Lab 列印" +"設備和官方線材上表現良好，因為它們已經進行了預先校正和微調。對於普通的線材，" +"通常情況下，您不需要執行流量率校正，除非在完成其他校正後仍然看到上述列出的缺" "陷。如需更多詳細資訊，請查閱 wiki 文章。" -#, fuzzy msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, " "directly measuring the calibration patterns. However, please be advised that " @@ -14046,78 +17056,63 @@ msgid "" "can lead to sub-par prints or printer damage. Please make sure to carefully " "read and understand the process before doing it." msgstr "" -"自動流量率校準採用 Bambu Lab 的微型雷射雷達技術，直接測量校準圖案。然而，請注" -"意，這種方法的功效和準確性可能會因特定類型的線材而受影響。特別是透明或半透" -"明、帶有閃光顆粒或具有高反射表面的線材可能不適合這種校準，並可能產生不理想的" -"結果。\n" +"自動流量率校正採用 Bambu Lab 的雷射雷達技術，直接測量校正圖案。然而，請注意，" +"這種方法的功效和準確性可能會因特定類型的線材而受影響。特別是透明或半透明、帶" +"有閃光顆粒或具有高反射表面的線材可能不適合這種校正，並可能產生不理想的結" +"果。\n" "\n" -"校準結果可能因每次校準或線材的不同而有所不同。我們仍在透過韌體更新不斷提高這" -"種校準的準確性和相容性。\n" +"校正結果可能因每次校正或線材的不同而有所不同。我們仍在透過韌體更新不斷提高這" +"種校正的準確性和相容性。\n" "\n" -"注意：流量率校準是一項先進的技術，只有完全理解其目的和影響的人才應嘗試。錯誤" +"注意：流量率校正是一項先進的技術，只有完全理解其目的和影響的人才應嘗試。錯誤" "的使用可能導致列印品質不佳或損壞列印設備。請確保在執行之前仔細閱讀和理解此過" "程。" msgid "When you need Max Volumetric Speed Calibration" -msgstr "當您需要最大體積速度校準時" +msgstr "當您需要最大體積速度校正時" msgid "Over-extrusion or under extrusion" msgstr "過度擠壓或擠壓不足" msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "使用以下選項列印時，建議進行最大體積速度校準：" +msgstr "使用以下選項列印時，建議進行最大體積速度校正：" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "具有顯著熱收縮/膨脹的材料，例如..." msgid "materials with inaccurate filament diameter" -msgstr "耗材直徑不準確的線材" +msgstr "線材直徑不準確的線材" msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "我們找到了最佳的流量動態校準因子。" +msgstr "我們找到了最佳的流量動態校正因子" -#, fuzzy msgid "" "Part of the calibration failed! You may clean the plate and retry. The " "failed test result would be dropped." -msgstr "部分校準失敗！ 您可以清潔列印板並重試。 失敗的測試結果將不會儲存。" +msgstr "部分校正失敗！您可以清潔列印板並重試。 失敗的測試結果將不會儲存。" msgid "" "*We recommend you to add brand, materia, type, and even humidity level in " "the Name" -msgstr "*我們建議您在名稱中加入品牌、材料、類型，甚至濕度水平。" +msgstr "*我們建議您在名稱中加入品牌、材料、類型，甚至濕度水平" -msgid "Failed" -msgstr "失敗" - -#, fuzzy msgid "Please enter the name you want to save to printer." msgstr "請輸入要儲存到列印設備的名稱。" msgid "The name cannot exceed 40 characters." msgstr "名稱不能超過40個字元。" -msgid "" -"Only one of the results with the same name will be saved. Are you sure you " -"want to override the other results?" -msgstr "" - msgid "Please find the best line on your plate" msgstr "請在您的列印板上找到最佳線條" msgid "Please find the corner with perfect degree of extrusion" -msgstr "" +msgstr "請找到最完美的列印角度" msgid "Input Value" msgstr "輸入值" -#, fuzzy msgid "Save to Filament Preset" -msgstr "儲存到材料預設值" - -#, fuzzy -msgid "Preset" -msgstr "預設值" +msgstr "儲存到材料預設" msgid "Record Factor" msgstr "記錄係數" @@ -14131,33 +17126,28 @@ msgstr "流量比" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "請輸入一個有效值（0.0<流量比<2.0）" -#, fuzzy msgid "Please enter the name of the preset you want to save." -msgstr "請輸入要儲存的預設值的名稱。" +msgstr "請輸入要儲存的預設名稱。" msgid "Calibration1" -msgstr "校準 1" +msgstr "校正 1" msgid "Calibration2" -msgstr "校準 2" +msgstr "校正 2" -#, fuzzy msgid "Please find the best object on your plate" -msgstr "請在你的列印板裡找到最好的物件" +msgstr "請在列印板上選擇最理想的物件" msgid "Fill in the value above the block with smoothest top surface" msgstr "用最光滑的頂面填充塊上方的值" msgid "Skip Calibration2" -msgstr "跳過校準2" +msgstr "跳過校正2" #, c-format, boost-format msgid "flow ratio : %s " msgstr "流量比：%s " -msgid "Please choose a block with smoothest top surface" -msgstr "請選擇頂部表面最光滑的塊" - msgid "Please choose a block with smoothest top surface." msgstr "請選擇頂部表面最光滑的塊。" @@ -14165,44 +17155,58 @@ msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "請輸入一個有效值（0<=最大體積速度<=60）" msgid "Calibration Type" -msgstr "校準類型" +msgstr "校正類型" msgid "Complete Calibration" -msgstr "完整校準" +msgstr "完整校正" msgid "Fine Calibration based on flow ratio" -msgstr "基於流量比的精細校準" +msgstr "基於流量比的精細校正" msgid "Title" msgstr "標題" -#, fuzzy msgid "" "A test model will be printed. Please clear the build plate and place it back " "to the hot bed before calibration." -msgstr "將列印一份測試模型。在校準之前，請清理列印板並將其放回熱床上。" +msgstr "將列印一份測試模型。在校正之前，請清理列印板並將其放回熱床上。" msgid "Printing Parameters" msgstr "列印參數" +msgid "Synchronize nozzle and AMS information" +msgstr "" + +msgid "Please connect the printer first before synchronizing." +msgstr "" + +#, c-format, boost-format +msgid "" +"Printer %s nozzle information has not been set. Please configure it before " +"proceeding with the calibration." +msgstr "" + +msgid "AMS and nozzle information are synced" +msgstr "" + +msgid "Nozzle Info" +msgstr "" + msgid "Plate Type" msgstr "熱床類型" msgid "filament position" msgstr "線材位置" -msgid "External Spool" -msgstr "外部線軸" - msgid "Filament For Calibration" -msgstr "校準用線材" +msgstr "校正用線材" msgid "" -"Tips for calibration material: \n" +"Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" +"- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" -"校準線材提示：\n" +"校正線材提示：\n" "-可以共享相同熱床溫度的線材\n" "-不同的線材品牌和系列（Brand = Bambu, Family = Basic, Matte）" @@ -14217,22 +17221,34 @@ msgid "%s is not compatible with %s" msgstr "%s 與 %s 不相容" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "不支援 TPU 進行流量動態自動校準。" +msgstr "不支援 TPU 進行流量動態自動校正。" + +msgid "" +"Cannot print multiple filaments which have large difference of temperature " +"together. Otherwise, the extruder and nozzle may be blocked or damaged " +"during printing" +msgstr "" + +msgid "Sync AMS and nozzle information" +msgstr "" -#, fuzzy msgid "Connecting to printer" msgstr "正在連接列印設備" -msgid "From k Value" +msgid "" +"Calibration only supports cases where the left and right nozzle diameters " +"are identical." msgstr "" +msgid "From k Value" +msgstr "從 k 值" + msgid "To k Value" -msgstr "" +msgstr "至 k 值" msgid "Step value" -msgstr "" +msgstr "步進值" -#, fuzzy msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "噴嘴直徑已從列印設備設定中同步" @@ -14242,8 +17258,11 @@ msgstr "從體積速度" msgid "To Volumetric Speed" msgstr "至體積速度" +msgid "Are you sure you want to cancel this print?" +msgstr "確定要取消這次列印嗎？" + msgid "Flow Dynamics Calibration Result" -msgstr "動態流量校準結果" +msgstr "動態流量校正結果" msgid "New" msgstr "新增" @@ -14252,28 +17271,41 @@ msgid "No History Result" msgstr "無歷史結果" msgid "Success to get history result" -msgstr "成功獲取歷史結果" +msgstr "成功取得歷史結果" msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "重整歷史流量動態校準記錄" +msgstr "重整歷史流量動態校正記錄" msgid "Action" msgstr "操作" #, c-format, boost-format msgid "This machine type can only hold %d history results per nozzle." -msgstr "" +msgstr "此設備型號每個噴嘴僅能儲存 %d 筆歷史結果。" msgid "Edit Flow Dynamics Calibration" -msgstr "編輯動態流量校準" +msgstr "編輯動態流量校正" + +#, c-format, boost-format +msgid "" +"Within the same extruder, the name '%s' must be unique when the filament " +"type, nozzle diameter, and nozzle flow are identical. Please choose a " +"different name." +msgstr "" msgid "New Flow Dynamic Calibration" -msgstr "" +msgstr "重新校正動態流量" msgid "Ok" -msgstr "" +msgstr "Ok" msgid "The filament must be selected." +msgstr "必須選擇線材。" + +msgid "The extruder must be selected." +msgstr "" + +msgid "The nozzle must be selected." msgstr "" msgid "Network lookup" @@ -14283,13 +17315,13 @@ msgid "Address" msgstr "地址" msgid "Hostname" -msgstr "主機名" +msgstr "主機名稱" msgid "Service name" -msgstr "服務名" +msgstr "服務名稱" msgid "OctoPrint version" -msgstr "OctoPrint版本" +msgstr "OctoPrint 版本" msgid "Searching for devices" msgstr "正在尋找設備" @@ -14298,125 +17330,138 @@ msgid "Finished" msgstr "完成" msgid "Multiple resolved IP addresses" -msgstr "" +msgstr "多個解析的 IP 位址" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" +"有多個 IP 位址解析到主機名稱 %1%。\n" +"請選擇一個要使用的 IP 位址。" msgid "PA Calibration" -msgstr "PA校準" - -msgid "DDE" -msgstr "近程擠出機" - -msgid "Bowden" -msgstr "遠程擠出機" +msgstr "PA 校正" msgid "Extruder type" msgstr "擠出機類型" +msgid "DDE" +msgstr "近程擠出機" + msgid "PA Tower" -msgstr "PA塔" +msgstr "PA 塔" msgid "PA Line" msgstr "劃線模式" msgid "PA Pattern" -msgstr "V形模式" +msgstr "V 形模式" msgid "Start PA: " -msgstr "起始值" +msgstr "起始值：" msgid "End PA: " -msgstr "結束值" +msgstr "結束值：" msgid "PA step: " -msgstr "步距" +msgstr "步距：" + +msgid "Accelerations: " +msgstr "加速度: " + +msgid "Speeds: " +msgstr "速度: " msgid "Print numbers" -msgstr "列印數字" +msgstr "列印號碼" + +msgid "Comma-separated list of printing accelerations" +msgstr "列印加速度的逗號分隔清單" + +msgid "Comma-separated list of printing speeds" +msgstr "列印速度的逗號分隔清單" + +msgid "Pressure Advance Guide" +msgstr "" + +msgid "Adaptive Pressure Advance Guide" +msgstr "" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" -"PA step: >= 0.001)" +"PA step: >= 0.001" msgstr "" "請輸入有效值：\n" -"起始PA：>= 0.0\n" -"結束PA：> 起始PA\n" -"PA步距：>= 0.001）" +"起始 PA：>= 0.0\n" +"結束 PA：> 起始PA\n" +"PA 步距：>= 0.001）" msgid "Temperature calibration" -msgstr "溫度校準" - -msgid "PLA" -msgstr "" - -msgid "ABS/ASA" -msgstr "" - -msgid "PETG" -msgstr "" - -msgid "PCTG" -msgstr "" - -msgid "TPU" -msgstr "" - -msgid "PA-CF" -msgstr "" - -msgid "PET-CF" -msgstr "" +msgstr "溫度校正" msgid "Filament type" msgstr "線材類型" -#, fuzzy +msgid "PLA" +msgstr "PLA" + +msgid "ABS/ASA" +msgstr "ABS/ASA" + +msgid "PETG" +msgstr "PETG" + +msgid "PCTG" +msgstr "PCTG" + +msgid "TPU" +msgstr "TPU" + +msgid "PA-CF" +msgstr "PA-CF" + +msgid "PET-CF" +msgstr "PET-CF" + msgid "Start temp: " msgstr "起始溫度： " msgid "End temp: " -msgstr "結束溫度" +msgstr "終止溫度：" msgid "Temp step: " -msgstr "溫度步距" +msgstr "溫度步距：" + +msgid "Wiki Guide: Temperature Calibration" +msgstr "" -#, fuzzy msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 170\n" -"Start temp > End temp + 5)" +"Start temp >= End temp + 5" msgstr "" -"請輸入有效值：\n" -"起始溫度：<= 350\n" -"結束溫度：>= 170\n" -"開始溫度 > 結束溫度 + 5）" msgid "Max volumetric speed test" msgstr "最大體積速度測試" msgid "Start volumetric speed: " -msgstr "起始流量" +msgstr "起始流量：" msgid "End volumetric speed: " -msgstr "結束流量" +msgstr "結束流量：" -msgid "step: " -msgstr "步距" +msgid "Wiki Guide: Volumetric Speed Calibration" +msgstr "" -#, fuzzy msgid "" "Please input valid values:\n" -"start > 0 \n" +"start > 0\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "請輸入有效值：\n" "開始 > 0\n" @@ -14424,19 +17469,22 @@ msgstr "" "結束 > 開始 + 步距）" msgid "VFA test" -msgstr "VFA震紋測試" +msgstr "VFA 震紋測試" msgid "Start speed: " -msgstr "起始速度" +msgstr "起始速度：" msgid "End speed: " -msgstr "結束速度" +msgstr "結束速度：" + +msgid "Wiki Guide: VFA" +msgstr "" msgid "" "Please input valid values:\n" -"start > 10 \n" +"start > 10\n" "step >= 0\n" -"end > start + step)" +"end > start + step" msgstr "" "請輸入有效值：\n" "開始 > 10\n" @@ -14444,39 +17492,159 @@ msgstr "" "結束 > 開始 + 步距）" msgid "Start retraction length: " -msgstr "起始回抽長度" +msgstr "起始回抽長度：" msgid "End retraction length: " -msgstr "結束回抽長度" +msgstr "結束回抽長度：" -msgid "mm/mm" +msgid "Wiki Guide: Retraction Calibration" msgstr "" -#, fuzzy -msgid "Send G-Code to printer host" +msgid "Input shaping Frequency test" +msgstr "" + +msgid "Test model" +msgstr "" + +msgid "Ringing Tower" +msgstr "" + +msgid "Fast Tower" +msgstr "" + +msgid "Input shaper type" +msgstr "" + +msgid "Frequency (Start / End): " +msgstr "" + +msgid "Start / End" +msgstr "" + +msgid "Frequency settings" +msgstr "" + +msgid "RepRap firmware uses the same frequency range for both axes." +msgstr "" + +msgid "Damp: " +msgstr "" + +msgid "" +"Recommended: Set Damp to 0.\n" +"This will use the printer's default or saved value." +msgstr "" + +msgid "Wiki Guide: Input Shaping Calibration" +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < FreqStart < FreqEnd < 500)" +msgstr "" + +msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" +msgstr "" + +msgid "Input shaping Damp test" +msgstr "" + +msgid "Frequency: " +msgstr "" + +msgid "Frequency" +msgstr "" + +msgid "Damp" +msgstr "" + +msgid "RepRap firmware uses the same frequency for both axes." +msgstr "" + +msgid "Note: Use previously calculated frequencies." +msgstr "" + +msgid "" +"Please input valid values:\n" +"(0 < Freq < 500)" +msgstr "" + +msgid "" +"Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" +msgstr "" + +msgid "Cornering test" +msgstr "" + +msgid "SCV-V2" +msgstr "" + +msgid "Start: " +msgstr "" + +msgid "End: " +msgstr "" + +msgid "Cornering settings" +msgstr "" + +msgid "Note: Lower values = sharper corners but slower speeds.\n" +msgstr "" + +msgid "" +"Marlin 2 Junction Deviation detected:\n" +"To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to " +"0." +msgstr "" + +msgid "" +"Marlin 2 Classic Jerk detected:\n" +"To test Junction Deviation, set 'Maximum Junction Deviation' in Motion " +"ability to a value > 0." +msgstr "" + +msgid "" +"RepRap detected: Jerk in mm/s.\n" +"Snapmaker Orca will convert the values to mm/min when necessary." +msgstr "" + +msgid "Wiki Guide: Cornering Calibration" +msgstr "" + +#, c-format, boost-format +msgid "" +"Please input valid values:\n" +"(0 <= Cornering <= %s)" +msgstr "" + +#, c-format, boost-format +msgid "NOTE: High values may cause Layer shift (>%s)" +msgstr "" + +msgid "Send G-code to printer host" msgstr "傳送 G-code 到列印設備" msgid "Upload to Printer Host with the following filename:" -msgstr "使用下列檔案名上傳到列印設備：" +msgstr "使用下列檔案名稱上傳到列印設備：" msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "如有需要，請使用正斜槓（ / ）作為目錄分隔符號。" +msgstr "如有需要，請使用正斜線（/）作為目錄分隔符。" msgid "Upload to storage" msgstr "上傳到儲存單位" msgid "Switch to Device tab after upload." -msgstr "" +msgstr "上傳後切換到設備分頁。" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "上傳的檔名不以 \"%s\" 結尾。確定要繼續嗎？" +msgstr "上傳的檔名不是「%s」結尾。確定要繼續嗎？" msgid "Upload" msgstr "上傳" msgid "Print host upload queue" -msgstr "列印主機上傳隊列" +msgstr "列印主機上傳佇列" msgid "ID" msgstr "ID" @@ -14492,7 +17660,7 @@ msgid "Size" msgstr "尺寸" msgid "Filename" -msgstr "檔案名" +msgstr "檔案名稱" msgid "Cancel selected" msgstr "取消選取" @@ -14500,24 +17668,38 @@ msgstr "取消選取" msgid "Show error message" msgstr "顯示錯誤資訊" -msgid "Enqueued" -msgstr "已加入隊列" +msgid "Queued" +msgstr "已加入佇列" msgid "Uploading" msgstr "正在上傳" -msgid "Cancelling" +msgid "Canceling" msgstr "取消中" -#, fuzzy msgid "Error uploading to print host" msgstr "上傳到列印設備時發生錯誤" -#, fuzzy +msgid "" +"The selected bed type does not match the file. Please confirm before " +"starting the print." +msgstr "選擇的床面類型與檔案不符，請在開始列印前確認。" + +msgid "Time-lapse" +msgstr "縮時錄影" + +msgid "Heated Bed Leveling" +msgstr "熱床調平" + +msgid "Textured Build Plate (Side A)" +msgstr "紋理列印板（A面）" + +msgid "Smooth Build Plate (Side B)" +msgstr "平滑列印板（A面）" + msgid "Unable to perform boolean operation on selected parts" msgstr "無法對所選零件執行布林運算" -#, fuzzy msgid "Mesh Boolean" msgstr "布林運算" @@ -14531,10 +17713,10 @@ msgid "Intersection" msgstr "交集" msgid "Source Volume" -msgstr "" +msgstr "來源體積" msgid "Tool Volume" -msgstr "" +msgstr "工具體積" msgid "Subtract from" msgstr "從中減去" @@ -14555,244 +17737,244 @@ msgid "Delete input" msgstr "刪除輸入" msgid "Network Test" -msgstr "" +msgstr "網路測試" msgid "Start Test Multi-Thread" -msgstr "" +msgstr "啟動多執行緒測試" msgid "Start Test Single-Thread" -msgstr "" +msgstr "啟動單執行緒測試" msgid "Export Log" -msgstr "" +msgstr "匯出記錄" msgid "Snapmaker Orca Version:" -msgstr "" +msgstr "Snapmaker Orca 版本：" msgid "System Version:" -msgstr "" +msgstr "系統版本：" msgid "DNS Server:" -msgstr "" +msgstr "DNS 伺服器：" -msgid "Test Snapmaker Orca(GitHub)" -msgstr "" +msgid "Test Snapmaker Orca (GitHub)" +msgstr "測試 Snapmaker Orca(GitHub)" -msgid "Test Snapmaker Orca(GitHub):" -msgstr "" +msgid "Test Snapmaker Orca (GitHub):" +msgstr "測試 Snapmaker Orca(GitHub):" -msgid "Test Bing.com" -msgstr "" +msgid "Test bing.com" +msgstr "測試 Bing.com" msgid "Test bing.com:" -msgstr "" +msgstr "測試 bing.com：" msgid "Log Info" -msgstr "" +msgstr "日誌資訊" msgid "Select filament preset" -msgstr "" +msgstr "選擇線材預設" msgid "Create Filament" -msgstr "" +msgstr "建立線材" msgid "Create Based on Current Filament" -msgstr "" +msgstr "依據目前線材建立" msgid "Copy Current Filament Preset " -msgstr "" +msgstr "複製目前的線材預設" msgid "Basic Information" -msgstr "" +msgstr "基本資訊" msgid "Add Filament Preset under this filament" -msgstr "" +msgstr "在此線材下新增線材預設" msgid "We could create the filament presets for your following printer:" -msgstr "" +msgstr "可以為您以下的列印設備建立線材預設：" msgid "Select Vendor" -msgstr "" +msgstr "選擇廠牌" msgid "Input Custom Vendor" -msgstr "" +msgstr "輸入自訂廠牌" msgid "Can't find vendor I want" -msgstr "" +msgstr "找不到我想要的廠牌" msgid "Select Type" -msgstr "" +msgstr "選擇類型" msgid "Select Filament Preset" -msgstr "" +msgstr "選擇線材預設" msgid "Serial" -msgstr "" +msgstr "序號" msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "" +msgstr "例如：基本、霧面、絲光、大理石" msgid "Filament Preset" -msgstr "" +msgstr "線材預設" msgid "Create" -msgstr "" +msgstr "建立" msgid "Vendor is not selected, please reselect vendor." -msgstr "" +msgstr "廠牌尚未選擇，請重新選擇廠牌。" msgid "Custom vendor is not input, please input custom vendor." -msgstr "" +msgstr "自訂廠牌尚未輸入，請輸入自訂廠牌。" msgid "" -"\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." -msgstr "" +"\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." +msgstr "「Bambu」或「Generic」不能作為自訂線材的廠牌名稱。" msgid "Filament type is not selected, please reselect type." -msgstr "" +msgstr "線材類型尚未選擇，請重新選擇類型。" -msgid "Filament serial is not inputed, please input serial." -msgstr "" +msgid "Filament serial is not entered, please enter serial." +msgstr "線材序號尚未輸入，請輸入序號。" msgid "" "There may be escape characters in the vendor or serial input of filament. " "Please delete and re-enter." -msgstr "" +msgstr "線材的廠牌或序號輸入中可能包含跳脫字元，請刪除並重新輸入。" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." -msgstr "" +msgstr "自訂廠牌或序號中的所有輸入都是空白，請重新輸入。" -msgid "The vendor can not be a number. Please re-enter." -msgstr "" +msgid "The vendor cannot be a number. Please re-enter." +msgstr "廠牌不能為數字，請重新輸入。" msgid "" "You have not selected a printer or preset yet. Please select at least one." -msgstr "" +msgstr "尚未選擇列印設備或預設，請至少選擇一個。" #, c-format, boost-format msgid "" -"The Filament name %s you created already exists. \n" +"The Filament name %s you created already exists.\n" "If you continue creating, the preset created will be displayed with its full " "name. Do you want to continue?" msgstr "" +"所建立的線材名稱 %s 已經存在。\n" +"如果繼續建立，預設將顯示完整的名稱。是否要繼續？" msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "" +msgstr "以下是一些現有的預設無法建立的原因：\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" +"\n" +"確定要覆寫嗎？" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" -"To add preset for more printers, Please go to printer selection" +"\".\n" +"To add preset for more printers, please go to printer selection" msgstr "" +"將會將預設名稱重新命名為「廠牌 型號 序號 @選擇的列印設備」。\n" +"若要為更多列印設備新增預設，請前往列印設備選擇頁面" msgid "Create Printer/Nozzle" -msgstr "" +msgstr "建立列印設備/噴嘴" msgid "Create Printer" -msgstr "" +msgstr "建立列印設備" msgid "Create Nozzle for Existing Printer" -msgstr "" +msgstr "為現有列印設備建立噴嘴" msgid "Create from Template" -msgstr "" +msgstr "從範本建立" msgid "Create Based on Current Printer" -msgstr "" +msgstr "依據目前列印設備建立" msgid "Import Preset" -msgstr "" +msgstr "匯入預設" msgid "Create Type" -msgstr "" +msgstr "建立類型" -msgid "The model is not found, place reselect vendor." -msgstr "" - -msgid "Select Model" -msgstr "" +msgid "The model was not found, please reselect vendor." +msgstr "找不到該型號，請重新選擇廠牌。" msgid "Select Printer" -msgstr "" +msgstr "選擇印表機" + +msgid "Select Model" +msgstr "選擇型號" msgid "Input Custom Model" -msgstr "" +msgstr "輸入自訂型號" msgid "Can't find my printer model" +msgstr "找不到我的列印設備型號" + +msgid "Input Custom Nozzle Diameter" +msgstr "" + +msgid "Can't find my nozzle diameter" msgstr "" msgid "Rectangle" -msgstr "" +msgstr "矩形" msgid "Printable Space" -msgstr "" +msgstr "可列印空間" msgid "Hot Bed STL" -msgstr "" - -msgid "Load stl" -msgstr "" +msgstr "熱床 STL" msgid "Hot Bed SVG" -msgstr "" - -msgid "Load svg" -msgstr "" +msgstr "熱床 SVG" msgid "Max Print Height" -msgstr "" +msgstr "最大列印高度" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." -msgstr "" +msgstr "檔案超過 %d MB，請重新匯入。" msgid "Exception in obtaining file size, please import again." -msgstr "" +msgstr "取得檔案大小時發生例外，請重新匯入。" -msgid "Preset path is not find, please reselect vendor." -msgstr "" +msgid "Preset path was not found, please reselect vendor." +msgstr "找不到預設路徑，請重新選擇廠牌。" msgid "The printer model was not found, please reselect." -msgstr "" +msgstr "找不到列印設備型號，請重新選擇。" -msgid "The nozzle diameter is not found, place reselect." -msgstr "" +msgid "The nozzle diameter was not found, please reselect." +msgstr "找不到噴嘴直徑，請重新選擇。" -msgid "The printer preset is not found, place reselect." -msgstr "" +msgid "The printer preset was not found, please reselect." +msgstr "未找到列印設備預設設定，請重新選擇。" msgid "Printer Preset" -msgstr "" +msgstr "列印設備預設設定" msgid "Filament Preset Template" -msgstr "" +msgstr "線材預設設定範本" msgid "Deselect All" -msgstr "" +msgstr "取消全選" msgid "Process Preset Template" -msgstr "" - -msgid "Back Page 1" -msgstr "" +msgstr "處理預設設定範本" msgid "" "You have not yet chosen which printer preset to create based on. Please " "choose the vendor and model of the printer" -msgstr "" +msgstr "尚未選擇要基於哪個列印設備預設設定來建立，請選擇列印設備的廠牌和型號" msgid "" "You have entered an illegal input in the printable area section on the first " "page. Please check before creating it." -msgstr "" - -msgid "The custom printer or model is not inputed, place input." -msgstr "" +msgstr "在第一頁的可列印區域部分輸入了無效的設定，請在建立前檢查。" msgid "" "The printer preset you created already has a preset with the same name. Do " @@ -14803,60 +17985,72 @@ msgid "" "reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" +"建立的列印設備預設設定已經有相同名稱的預設設定。是否要覆蓋它？\n" +"\t是：覆蓋相同名稱的列印設備預設設定，並重新建立名稱相同的線材和處理預設設" +"定，名稱不同的線材和處理預設設定將被保留。\n" +" \t取消：不建立預設設定，返回建立界面。" msgid "You need to select at least one filament preset." -msgstr "" +msgstr "需要至少選擇一個線材預設設定。" msgid "You need to select at least one process preset." -msgstr "" +msgstr "需要至少選擇一個處理預設設定。" msgid "Create filament presets failed. As follows:\n" -msgstr "" +msgstr "建立線材預設設定失敗，原因如下：\n" msgid "Create process presets failed. As follows:\n" -msgstr "" +msgstr "建立處理預設設定失敗，原因如下：\n" -msgid "Vendor is not find, please reselect." -msgstr "" +msgid "Vendor was not found, please reselect." +msgstr "未找到廠牌，請重新選擇。" msgid "Current vendor has no models, please reselect." -msgstr "" +msgstr "目前廠牌沒有可用的型號，請重新選擇。" msgid "" -"You have not selected the vendor and model or inputed the custom vendor and " +"You have not selected the vendor and model or entered the custom vendor and " "model." -msgstr "" +msgstr "您尚未選擇廠牌和型號，或未輸入自訂的廠牌和型號。" msgid "" "There may be escape characters in the custom printer vendor or model. Please " "delete and re-enter." -msgstr "" +msgstr "自訂列印設備廠牌或型號中可能包含轉義字符。請刪除後重新輸入。" msgid "" "All inputs in the custom printer vendor or model are spaces. Please re-enter." -msgstr "" +msgstr "自訂列印設備廠牌或型號的所有輸入為空格。請重新輸入。" msgid "Please check bed printable shape and origin input." -msgstr "" +msgstr "請檢查熱床可列印區域形狀和原點設定。" msgid "" "You have not yet selected the printer to replace the nozzle, please choose." +msgstr "尚未選擇要更換噴嘴的列印設備，請選擇。" + +msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "" -msgid "Create Printer Successful" +msgid "" +"The system preset does not allow creation. \n" +"Please re-enter the printer model or nozzle diameter." msgstr "" -msgid "Create Filament Successful" -msgstr "" +msgid "Printer Created Successfully" +msgstr "列印設備建立成功" + +msgid "Filament Created Successfully" +msgstr "線材建立成功" msgid "Printer Created" -msgstr "" +msgstr "列印設備建立完成" msgid "Please go to printer settings to edit your presets" -msgstr "" +msgstr "請前往列印設備設定編輯您的預設設定" msgid "Filament Created" -msgstr "" +msgstr "線材建立完成" msgid "" "Please go to filament setting to edit your presets if you need.\n" @@ -14864,51 +18058,59 @@ msgid "" "volumetric speed has a significant impact on printing quality. Please set " "them carefully." msgstr "" +"如需調整，請至線材設定頁編輯您的預設。\n" +"請特別注意，噴嘴溫度、熱床溫度及最大體積速度會顯著影響列印品質，建議謹慎設" +"定。" msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not " "enabled, which may result in unsuccessful Filament settings on the Device " -"page. \n" +"page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" +"\n" +"\n" +"Orca 偵測到您的使用者預設同步功能尚未啟用，這可能導致線材設定在裝置頁面上無法" +"正常使用。\n" +"請點擊『同步使用者預設』以啟用同步功能。" msgid "Printer Setting" -msgstr "" +msgstr "列印設備設定" msgid "Printer config bundle(.orca_printer)" -msgstr "" +msgstr "列印設備設定檔 (.orca_printer)" msgid "Filament bundle(.orca_filament)" -msgstr "" +msgstr "線材設定檔 (.orca_filament)" msgid "Printer presets(.zip)" -msgstr "" +msgstr "列印設備預設設定檔 (.zip)" msgid "Filament presets(.zip)" -msgstr "" +msgstr "線材預設設定檔 (.zip)" msgid "Process presets(.zip)" -msgstr "" +msgstr "處理預設設定檔 (.zip)" msgid "initialize fail" -msgstr "" +msgstr "初始化失敗" msgid "add file fail" -msgstr "" +msgstr "新增檔案失敗" msgid "add bundle structure file fail" -msgstr "" +msgstr "新增捆綁結構檔案失敗" msgid "finalize fail" -msgstr "" +msgstr "失敗" msgid "open zip written fail" -msgstr "" +msgstr "打開 zip 檔案失敗" msgid "Export successful" -msgstr "" +msgstr "匯出成功" #, c-format, boost-format msgid "" @@ -14917,186 +18119,250 @@ msgid "" "If not, a time suffix will be added, and you can modify the name after " "creation." msgstr "" +"目前目錄中已存在 '%s' 資料夾。您是否要清除它並重新建立？\n" +"如果不想清除，將會加上時間後綴，並且您可以在建立後修改名稱。" +#, c-format, boost-format msgid "" -"Printer and all the filament&&process presets that belongs to the printer. \n" -"Can be shared with others." +"The file: %s\n" +"may have been opened by another program.\n" +"Please close it and try again." msgstr "" msgid "" -"User's fillment preset set. \n" +"Printer and all the filament&&process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" +"列印設備及所有屬於該列印設備的線材和處理預設設定。 \n" +"可以與他人分享。" + +msgid "" +"User's filament preset set.\n" +"Can be shared with others." +msgstr "" +"使用者的線材預設設定。 \n" +"可以與他人分享。" msgid "" "Only display printer names with changes to printer, filament, and process " "presets." -msgstr "" +msgstr "僅顯示對列印設備、線材和處理預設設定有變更的列印設備名稱。" msgid "Only display the filament names with changes to filament presets." -msgstr "" +msgstr "僅顯示對線材預設設定有變更的線材名稱。" msgid "" "Only printer names with user printer presets will be displayed, and each " "preset you choose will be exported as a zip." msgstr "" +"只有具有使用者列印設備預設設定的列印設備名稱會顯示，您選擇的每個預設設定將以 " +"zip 檔案格式匯出。" msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be " "exported as a zip." msgstr "" +"只有具有使用者線材預設設定的線材名稱會顯示，\n" +"您選擇的每個線材名稱中的所有使用者線材預設設定將以 zip 檔案格式匯出。" msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be " "exported as a zip." msgstr "" +"只有具有變更過處理預設設定的列印設備名稱會顯示，\n" +"您選擇的每個列印設備名稱中的所有使用者處理預設設定將以 zip 檔案格式匯出。" msgid "Please select at least one printer or filament." -msgstr "" +msgstr "請至少選擇一個列印設備或線材。" msgid "Please select a type you want to export" -msgstr "" +msgstr "請選擇您要匯出的類型" msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "" +msgstr "建立臨時資料夾失敗，請再次嘗試匯出配置。" msgid "Edit Filament" -msgstr "" +msgstr "編輯線材" msgid "Filament presets under this filament" -msgstr "" +msgstr "此線材下的線材預設設定" msgid "" "Note: If the only preset under this filament is deleted, the filament will " "be deleted after exiting the dialog." -msgstr "" +msgstr "注意：如果此線材下的唯一預設設定被刪除，退出對話框後該線材將被刪除。" -msgid "Presets inherited by other presets can not be deleted" -msgstr "" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "被其他預設設定繼承的預設設定無法刪除" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." -msgstr[0] "" +msgstr[0] "以下預設設定繼承了此預設。" msgid "Delete Preset" -msgstr "" - -msgid "Are you sure to delete the selected preset?" -msgstr "" - -msgid "Delete preset" -msgstr "" - -msgid "+ Add Preset" -msgstr "" - -msgid "Delete Filament" -msgstr "" +msgstr "刪除預設設定" msgid "" -"All the filament presets belong to this filament would be deleted. \n" +"Are you sure to delete the selected preset?\n" +"If the preset corresponds to a filament currently in use on your printer, " +"please reset the filament information for that slot." +msgstr "" +"您確定要刪除所選預設嗎？\n" +"如果該預設對應的是列印設備目前使用的線材，請重置該槽位的線材資訊。" + +msgid "Are you sure to delete the selected preset?" +msgstr "確定要刪除選定的預設設定嗎？" + +msgid "Delete preset" +msgstr "刪除預設設定" + +msgid "+ Add Preset" +msgstr "+ 新增預設設定" + +msgid "" +"All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament " "information for that slot." msgstr "" +"所有屬於此線材的預設設定將被刪除。\n" +"如果您正在列印設備上使用此線材，請重新設置該插槽的線材資訊。" msgid "Delete filament" -msgstr "" +msgstr "刪除線材" msgid "Add Preset" -msgstr "" +msgstr "新增預設設定" msgid "Add preset for new printer" -msgstr "" +msgstr "為新列印設備新增預設設定" msgid "Copy preset from filament" -msgstr "" +msgstr "從線材複製預設設定" msgid "The filament choice not find filament preset, please reselect it" -msgstr "" +msgstr "未找到該線材的預設設定，請重新選擇" msgid "[Delete Required]" -msgstr "" +msgstr "「需要刪除」" msgid "Edit Preset" -msgstr "" +msgstr "編輯預設設定" msgid "For more information, please check out Wiki" -msgstr "" +msgstr "如需更多資訊，請查看 Wiki" msgid "Collapse" msgstr "摺疊" msgid "Daily Tips" +msgstr "每日提示" + +#, c-format, boost-format +msgid "nozzle size in preset: %d" msgstr "" #, c-format, boost-format -msgid "nozzle memorized: %.1f %s" +msgid "nozzle size memorized: %d" msgstr "" msgid "" -"Your nozzle diameter in preset is not consistent with memorized nozzle " -"diameter. Did you change your nozzle lately?" +"The size of nozzle type in preset is not consistent with memorized nozzle. " +"Did you change your nozzle lately?" msgstr "" #, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" +msgid "nozzle[%d] in preset: %.1f" +msgstr "" + +#, c-format, boost-format +msgid "nozzle[%d] memorized: %.1f" +msgstr "" + +msgid "" +"Your nozzle type in preset is not consistent with memorized nozzle. Did you " +"change your nozzle lately?" +msgstr "" + +#, c-format, boost-format +msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" -#, fuzzy msgid "Need select printer" msgstr "需要選擇列印設備" msgid "The start, end or step is not valid value." msgstr "開始、結束或步距不是有效值。" +msgid "" +"The number of printer extruders and the printer selected for calibration " +"does not match." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle diameter of %s extruder does not match the " +"actual nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"The nozzle diameter does not match the actual printer nozzle diameter.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently selected nozzle type of %s extruder does not match the actual " +"printer nozzle type.\n" +"Please click the Sync button above and restart the calibration." +msgstr "" + +msgid "" +"Automatic calibration only supports cases where the left and right nozzle " +"diameters are identical." +msgstr "" + msgid "" "Unable to calibrate: maybe because the set calibration value range is too " "large, or the step is too small" -msgstr "無法校準：可能是設定的校準值範圍太大，或步距太小" +msgstr "無法校正：可能是設定的校正值範圍太大，或步距太小" -#, fuzzy msgid "Physical Printer" msgstr "實體列印設備" msgid "Print Host upload" -msgstr "打印主機上傳" +msgstr "列印主機上傳" msgid "Could not get a valid Printer Host reference" -msgstr "無法獲得有效的打印機主機參考資料" +msgstr "無法獲得有效的列印設備主機參考資料" msgid "Success!" msgstr "成功！" msgid "Are you sure to log out?" -msgstr "" - -#, fuzzy -msgid "Refresh Printers" -msgstr "重新整理列印設備" +msgstr "確定要登出嗎？" msgid "View print host webui in Device tab" -msgstr "" +msgstr "在設備選項卡中查看列印主機的 Web UI" msgid "Replace the BambuLab's device tab with print host webui" -msgstr "" +msgstr "將 BambuLab 的設備選項卡替換為列印主機的 Web UI" -#, fuzzy msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"HTTPS CA 憑證檔案是可選的。 僅當您使用具有自帶簽名憑證的 HTTPS 時才需要它。" +"HTTPS CA 憑證檔案是可選的。 僅當您使用具有自行簽證的 HTTPS 時才需要它。" -#, fuzzy msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "憑證檔（*.crt, *.pem）|*.crt;*.pem|All files|*.*" +msgstr "憑證檔（*.crt, *.pem）|*.crt;*.pem|所有檔案|*.*" msgid "Open CA certificate file" msgstr "開啟 CA憑證檔" -#, fuzzy, c-format, boost-format +#, c-format, boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." @@ -15108,31 +18374,31 @@ msgid "" msgstr "若要使用自訂 CA 憑證檔，請將您的 CA 憑證檔匯入到憑證儲存庫/鑰匙圈中。" msgid "Login/Test" -msgstr "" +msgstr "登入/測試" msgid "Connection to printers connected via the print host failed." -msgstr "經由打印主機連接的打印機連接失敗。" +msgstr "經由列印主機連接的列印設備連接失敗。" #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "打印主機類型不符：%s" +msgstr "列印主機類型不符：%s" -msgid "Connection to AstroBox works correctly." +msgid "Connection to AstroBox is working correctly." msgstr "與 AstroBox 的連接工作正常。" msgid "Could not connect to AstroBox" msgstr "無法連接到 AstroBox" -msgid "Note: AstroBox version at least 1.1.0 is required." +msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "注意：AstroBox 版本至少需要 1.1.0。" -msgid "Connection to Duet works correctly." +msgid "Connection to Duet is working correctly." msgstr "與 Duet 的連接工作正常。" msgid "Could not connect to Duet" msgstr "無法連接到 Duet" -msgid "Unknown error occured" +msgid "Unknown error occurred" msgstr "發生未知的錯誤" msgid "Wrong password" @@ -15144,7 +18410,7 @@ msgstr "無法取得建立新連結的資源" msgid "Upload not enabled on FlashAir card." msgstr "FlashAir 卡上未啟用上傳。" -msgid "Connection to FlashAir works correctly and upload is enabled." +msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "與 FlashAir 的連接工作正常並啟用上傳。" msgid "Could not connect to FlashAir" @@ -15155,64 +18421,64 @@ msgid "" "is required." msgstr "注意：FlashAir 需要韌體為 2.00.02 或更新版本並啟動上傳功能。" -msgid "Connection to MKS works correctly." -msgstr "" +msgid "Connection to MKS is working correctly." +msgstr "成功連接到 MKS。" msgid "Could not connect to MKS" -msgstr "" +msgstr "無法連接到 MKS" -msgid "Connection to OctoPrint works correctly." +msgid "Connection to OctoPrint is working correctly." msgstr "與 OctoPrint 的連接工作正常。" msgid "Could not connect to OctoPrint" msgstr "無法連接到 OctoPrint" -msgid "Note: OctoPrint version at least 1.1.0 is required." +msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "注意：OctoPrint 版本至少需要 1.1.0。" -msgid "Connection to Prusa SL1 / SL1S works correctly." +msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "與 Prusa SL1 / SL1S 的連接工作正常。" msgid "Could not connect to Prusa SLA" msgstr "無法連接到 Prusa SLA" -msgid "Connection to PrusaLink works correctly." +msgid "Connection to PrusaLink is working correctly." msgstr "與 PrusaLink 的連接工作正常。" msgid "Could not connect to PrusaLink" msgstr "無法連接到 PrusaLink" msgid "Storages found" -msgstr "" +msgstr "找到存儲空間" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" -msgstr "" +msgstr "%1% : 唯讀" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" -msgstr "" +msgstr "%1%：沒有可用空間" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "" +msgstr "上傳失敗。未找到適當的存儲位置在 %1%。" -msgid "Connection to Prusa Connect works correctly." -msgstr "" +msgid "Connection to Prusa Connect is working correctly." +msgstr "成功連接到 Prusa Connect。" msgid "Could not connect to Prusa Connect" -msgstr "" +msgstr "無法連接到 Prusa Connect" -msgid "Connection to Repetier works correctly." +msgid "Connection to Repetier is working correctly." msgstr "與 Repetier 的連接工作正常。" msgid "Could not connect to Repetier" msgstr "無法連接到 Repetier" -msgid "Note: Repetier version at least 0.90.0 is required." +msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "注意：Repetier 版本至少需要 0.90.0。" #, boost-format @@ -15221,7 +18487,7 @@ msgid "" "Message body: \"%2%\"" msgstr "" "HTTP 狀態：%1%\n" -"訊息內容：“%2%”" +"訊息內容：「%2%」" #, boost-format msgid "" @@ -15230,8 +18496,8 @@ msgid "" "Error: \"%2%\"" msgstr "" "主機溝通解析失敗。\n" -"訊息內容：“%1%”\n" -"錯誤碼：“%2%”" +"訊息內容：「%1%」。\n" +"錯誤碼：「%2%」" #, boost-format msgid "" @@ -15239,216 +18505,666 @@ msgid "" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"主機打印機例舉失敗。\n" -"訊息內容：“%1%”\n" -"錯誤碼：“%2%”" +"主機列印設備例舉失敗。\n" +"訊息內容：「%1%」\n" +"錯誤碼：「%2%」" msgid "" -"It has a small layer height, and results in almost negligible layer lines " -"and high printing quality. It is suitable for most general printing cases." +"It has a small layer height. This results in almost negligible layer lines " +"and high print quality. It is suitable for most printing cases." msgstr "" +"它具有較小的層高，產生幾乎可以忽略不計的層線並具有較高的列印品質。適用於大多" +"數一般的列印情況。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds " -"and acceleration, and the sparse infill pattern is Gyroid. So, it results in " -"much higher printing quality, but a much longer printing time." +"and acceleration, and the sparse infill pattern is Gyroid. This results in " +"much higher print quality but a much longer print time." msgstr "" +"與 0.2 毫米噴嘴的預設配置相比，該配置具有較低的速度和加速度，且稀疏填充圖案" +"為 Gyroid。因此，列印品質大幅提高，但列印時間大幅延長。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a slightly " -"bigger layer height, and results in almost negligible layer lines, and " -"slightly shorter printing time." +"bigger layer height. This results in almost negligible layer lines and " +"slightly shorter print time." msgstr "" +"與 0.2 毫米噴嘴的預設配置相比，該配置具有略大的層高，產生幾乎可以忽略不計的層" +"線，並略微縮短列印時間。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer " -"height, and results in slightly visible layer lines, but shorter printing " -"time." +"height. This results in slightly visible layer lines but shorter print time." msgstr "" +"與 0.2 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生略微可見的層線，但列" +"印時間較短。" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " -"height, and results in almost invisible layer lines and higher printing " -"quality, but shorter printing time." +"height. This results in almost invisible layer lines and higher print " +"quality but longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost invisible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost invisible layer lines and much higher print " +"quality but much longer print time." msgstr "" +"與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層線、較低的速度和加速度，且稀" +"疏填充圖案為 Gyroid。因此，產生幾乎不可見的層線並大幅提高列印品質，但列印時間" +"會大大延長。" msgid "" -"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer " -"height, and results in minimal layer lines and higher printing quality, but " -"shorter printing time." +"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " +"height. This results in minimal layer lines and higher print quality but " +"longer print time." msgstr "" msgid "" "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer " "lines, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in minimal layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in minimal layer lines and much higher print quality " +"but much longer print time." msgstr "" +"與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層線、較低的速度和加速度，且稀" +"疏填充圖案為 Gyroid。因此，產生最小的層線並大幅提高列印品質，但列印時間會大大" +"延長。" msgid "" -"It has a general layer height, and results in general layer lines and " -"printing quality. It is suitable for most general printing cases." +"It has a normal layer height. This results in average layer lines and print " +"quality. It is suitable for most printing cases." msgstr "" +"它具有一般的層高，產生一般的層線和列印品質。適用於大多數一般的列印情況。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有更多的牆壁圈層和較高的稀疏填充密度。" +"因此，列印物品的強度更高，但會增加耗材使用量並延長列印時間。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but slightly shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but slightly shorter print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並降低列" +"印品質，但列印時間略微縮短。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並降低列" +"印品質，但列印時間較短。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生較不明顯的層線並提高" +"列印品質，但列印時間較長。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in less apparent layer lines and much higher printing " -"quality, but much longer printing time." +"Gyroid. This results in less apparent layer lines and much higher print " +"quality but much longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高、較低的速度和加速度，且稀" +"疏填充圖案為 Gyroid。因此，產生較不明顯的層線，並且列印品質大幅提高，但列印時" +"間會大大延長。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and higher printing " -"quality, but longer printing time." +"height. This results in almost negligible layer lines and higher print " +"quality but longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎可以忽略不計的層" +"線，並提高列印品質，但列印時間較長。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " "height, lower speeds and acceleration, and the sparse infill pattern is " -"Gyroid. So, it results in almost negligible layer lines and much higher " -"printing quality, but much longer printing time." +"Gyroid. This results in almost negligible layer lines and much higher print " +"quality but much longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高、較低的速度和加速度，且稀" +"疏填充圖案為 Gyroid。因此，產生幾乎可以忽略不計的層線，並且列印品質大幅提高，" +"但列印時間會大大延長。" msgid "" "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer " -"height, and results in almost negligible layer lines and longer printing " -"time." +"height. This results in almost negligible layer lines and longer print time." msgstr "" +"與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎可以忽略不計的層" +"線，但列印時間較長。" msgid "" -"It has a big layer height, and results in apparent layer lines and ordinary " -"printing quality and printing time." -msgstr "" +"It has a big layer height. This results in apparent layer lines and ordinary " +"print quality and print time." +msgstr "它具有較大的層高，產生明顯的層線，並且列印品質和列印時間屬於普通水平。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops " -"and a higher sparse infill density. So, it results in higher strength of the " -"prints, but more filament consumption and longer printing time." +"and a higher sparse infill density. This results in higher print strength " +"but more filament consumption and longer print time." msgstr "" +"與 0.6 毫米噴嘴的預設配置相比，該配置具有更多的牆壁圈層和較高的稀疏填充密度。" +"因此，列印物品的強度更高，但會增加耗材使用量並延長列印時間。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in more apparent layer lines and lower printing quality, " -"but shorter printing time in some printing cases." +"height. This results in more apparent layer lines and lower print quality, " +"but shorter print time in some cases." msgstr "" +"與 0.6 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生較為明顯的層線並降低" +"列印品質，但在某些情況下會縮短列印時間。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer " -"height, and results in much more apparent layer lines and much lower " -"printing quality, but shorter printing time in some printing cases." +"height. This results in much more apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" +"與 0.6 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並顯著降" +"低列印品質，但在某些情況下會縮短列印時間。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and slight higher printing " -"quality, but longer printing time." +"height. This results in less apparent layer lines and slight higher print " +"quality but longer print time." msgstr "" +"與 0.6 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生較不明顯的層線並略微" +"提高列印品質，但列印時間較長。" msgid "" "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer " -"height, and results in less apparent layer lines and higher printing " -"quality, but longer printing time." -msgstr "" +"height. This results in less apparent layer lines and higher print quality " +"but longer print time." +msgstr "它具有非常大的層高，產生明顯的層線、較低的列印品質和一般的列印時間。" msgid "" -"It has a very big layer height, and results in very apparent layer lines, " -"low printing quality and general printing time." +"It has a very big layer height. This results in very apparent layer lines, " +"low print quality and shorter print time." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer " -"height, and results in very apparent layer lines and much lower printing " -"quality, but shorter printing time in some printing cases." +"height. This results in very apparent layer lines and much lower print " +"quality, but shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger " -"layer height, and results in extremely apparent layer lines and much lower " -"printing quality, but much shorter printing time in some printing cases." +"layer height. This results in extremely apparent layer lines and much lower " +"print quality, but much shorter print time in some cases." msgstr "" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a slightly " -"smaller layer height, and results in slightly less but still apparent layer " -"lines and slightly higher printing quality, but longer printing time in some " -"printing cases." +"smaller layer height. This results in slightly less but still apparent layer " +"lines and slightly higher print quality but longer print time in some cases." msgstr "" +"與0.8mm噴嘴的預設配置相比，該配置具有較小的層高，從而產生較少但仍明顯的層線，" +"並略微提高列印品質，但在某些情況下會延長列印時間。" msgid "" "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer " -"height, and results in less but still apparent layer lines and slightly " -"higher printing quality, but longer printing time in some printing cases." +"height. This results in less but still apparent layer lines and slightly " +"higher print quality but longer print time in some cases." +msgstr "" + +msgid "" +"This is neither a commonly used filament, nor one of Bambu filaments, and it " +"varies a lot from brand to brand. So, it's highly recommended to ask its " +"vendor for suitable profile before printing and adjust some parameters " +"according to its performances." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of warping and low layer " +"adhesion strength. To get better results, please refer to this wiki: " +"Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"When printing this filament, there's a risk of nozzle clogging, oozing, " +"warping and low layer adhesion strength. To get better results, please refer " +"to this wiki: Printing Tips for High Temp / Engineering materials." +msgstr "" + +msgid "" +"To get better transparent or translucent results with the corresponding " +"filament, please refer to this wiki: Printing tips for transparent PETG." +msgstr "" + +msgid "" +"To make the prints get higher gloss, please dry the filament before use, and " +"set the outer wall speed to be 40 to 60 mm/s when slicing." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: Instructions for printing RC model with foaming PLA (PLA " +"Aero)." +msgstr "" + +msgid "" +"This filament is only used to print models with a low density usually, and " +"some special parameters are required. To get better printing quality, please " +"refer to this wiki: ASA Aero Printing Guide." +msgstr "" + +msgid "" +"This filament is too soft and not compatible with the AMS. Printing it is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: TPU printing guide." +msgstr "" + +msgid "" +"This filament has high enough hardness (about 67D) and is compatible with " +"the AMS. Printing it is of many requirements, and to get better printing " +"quality, please refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"If you are to print a kind of soft TPU, please don't slice with this " +"profile, and it is only for TPU that has high enough hardness (not less than " +"55D) and is compatible with the AMS. To get better printing quality, please " +"refer to this wiki: TPU printing guide." +msgstr "" + +msgid "" +"This is a water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. Printing this filament is of " +"many requirements, and to get better printing quality, please refer to this " +"wiki: PVA Printing Guide." +msgstr "" + +msgid "" +"This is a non-water-soluble support filament, and usually it is only for the " +"support structure and not for the model body. To get better printing " +"quality, please refer to this wiki: Printing Tips for Support Filament and " +"Support Function." +msgstr "" + +msgid "" +"The generic presets are conservatively tuned for compatibility with a wider " +"range of filaments. For higher printing quality and speeds, please use Bambu " +"filaments with Bambu presets." +msgstr "" + +msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." +msgstr "" + +msgid "" +"High quality profile for 0.16mm layer height, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Standard profile for 0.16mm layer height, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.2mm layer height, prioritizing strength and print " +"quality." +msgstr "" + +msgid "Standard profile for 0.4mm nozzle, prioritizing speed." +msgstr "" + +msgid "" +"High quality profile for 0.6mm nozzle, prioritizing print quality and " +"strength." +msgstr "" + +msgid "Strength profile for 0.6mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.6mm nozzle, prioritizing speed." +msgstr "" + +msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." +msgstr "" + +msgid "Strength profile for 0.8mm nozzle, prioritizing strength." +msgstr "" + +msgid "Standard profile for 0.8mm nozzle, prioritizing speed." +msgstr "" + +msgid "No AMS" +msgstr "無 AMS" + +msgid "There is no device available to send printing." +msgstr "沒有可用的機臺可以傳送列印。" + +msgid "The number of printers in use simultaneously cannot be equal to 0." +msgstr "同時使用的列印機數量不能為 0。" + +msgid "Use External Spool" +msgstr "使用外掛線盤" + +msgid "Select Printers" +msgstr "選擇列印設備" + +msgid "Device Name" +msgstr "機台名稱" + +msgid "Device Status" +msgstr "機台狀態" + +msgid "AMS Status" +msgstr "AMS 狀態" + +msgid "" +"Please select the devices you would like to manage here (up to 6 devices)" +msgstr "請選擇要管理的設備（最多6台）" + +msgid "Printing Options" +msgstr "列印選項" + +msgid "Bed Leveling" +msgstr "熱床調平" + +msgid "Flow Dynamic Calibration" +msgstr "動態流量校正" + +msgid "Send Options" +msgstr "傳送選項" + +msgid "Send to" +msgstr "傳送到" + +msgid "" +"printers at the same time. (It depends on how many devices can undergo " +"heating at the same time.)" +msgstr "可同時運行的列印機數量。（取決於能同時加熱的設備數量而定。）" + +msgid "Wait" +msgstr "等待" + +msgid "" +"minute each batch. (It depends on how long it takes to complete the heating.)" +msgstr "每批次需要的分鐘數。（具體取決於加熱完成所需的時間。）" + +msgid "Task Sending" +msgstr "傳送中" + +msgid "Task Sent" +msgstr "傳送完成" + +msgid "Edit multiple printers" +msgstr "編輯多個列印設備" + +msgid "Select connected printers (0/6)" +msgstr "選擇已連線機台 (0/6)" + +#, c-format, boost-format +msgid "Select Connected Printers (%d/6)" +msgstr "選擇已連線機台 (%d/6)" + +#, c-format, boost-format +msgid "The maximum number of printers that can be selected is %d" +msgstr "最多可選擇 %d 台" + +msgid "No task" +msgstr "無作業" + +msgid "Edit Printers" +msgstr "編輯機台" + +msgid "Task Name" +msgstr "作業名稱" + +msgid "Actions" +msgstr "操作" + +msgid "Task Status" +msgstr "狀態" + +msgid "Sent Time" +msgstr "傳送時間" + +msgid "There are no tasks to be sent!" +msgstr "無檔案可傳！" + +msgid "No historical tasks!" +msgstr "無歷史記錄！" + +msgid "Upgrading" +msgstr "升級中" + +msgid "syncing" +msgstr "同步中" + +msgid "Printing Finish" +msgstr "完成列印" + +msgid "Printing Failed" +msgstr "列印失敗" + +msgid "Printing Pause" +msgstr "列印暫停" + +msgid "Pending" +msgstr "待處理" + +msgid "Sending" +msgstr "傳送中" + +msgid "Sending Finish" +msgstr "傳送完成" + +msgid "Sending Cancel" +msgstr "取消傳送" + +msgid "Sending Failed" +msgstr "傳送失敗" + +msgid "Print Success" +msgstr "列印成功" + +msgid "Print Failed" +msgstr "列印失敗" + +msgid "Removed" +msgstr "已移除" + +msgid "Don't remind me again" +msgstr "" + +msgid "No further pop-up will appear. You can reopen it in 'Preferences'" +msgstr "" + +msgid "Filament-Saving Mode" +msgstr "" + +msgid "Convenience Mode" +msgstr "" + +msgid "Custom Mode" +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the most " +"filament-saving principles to minimize waste." +msgstr "" + +msgid "" +"Generates filament grouping for the left and right nozzles based on the " +"printer's actual filament status, reducing the need for manual filament " +"adjustment." +msgstr "" + +msgid "Manually assign filament to the left or right nozzle" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" +msgstr "" + +msgid "We will slice according to this grouping method:" +msgstr "" + +msgid "Tip: You can drag the filaments to reassign them to different nozzles." +msgstr "" + +msgid "" +"The filament grouping method for current plate is determined by the dropdown " +"option at the slicing plate button." msgstr "" msgid "Connected to Obico successfully!" -msgstr "" +msgstr "成功連接到 Obico！" msgid "Could not connect to Obico" -msgstr "" +msgstr "無法連接到 Obico" msgid "Connected to SimplyPrint successfully!" -msgstr "" +msgstr "成功連接到 SimplyPrint！" msgid "Could not connect to SimplyPrint" -msgstr "" +msgstr "無法連接到 SimplyPrint" msgid "Internal error" -msgstr "" +msgstr "內部錯誤" msgid "Unknown error" -msgstr "" +msgstr "未知錯誤" msgid "SimplyPrint account not linked. Go to Connect options to set it up." +msgstr "SimplyPrint 帳戶未連結。請前往連接選項進行設置。" + +msgid "Serial connection to Flashforge is working correctly." msgstr "" -msgid "Connection to Flashforge works correctly." -msgstr "" - -msgid "Could not connect to Flashforge" +msgid "Could not connect to Flashforge via serial" msgstr "" msgid "The provided state is not correct." -msgstr "" +msgstr "提供的狀態不正確。" msgid "Please give the required permissions when authorizing this application." -msgstr "" +msgstr "授權此應用程式時，請提供所需的權限。" msgid "Something unexpected happened when trying to log in, please try again." +msgstr "嘗試登入時發生了意外錯誤，請再試一次。" + +msgid "User canceled." +msgstr "使用者取消。" + +msgid "Head diameter" +msgstr "頭直徑" + +msgid "Max angle" +msgstr "最大角度" + +msgid "Detection radius" +msgstr "偵測範圍" + +msgid "Remove selected points" +msgstr "移除選定的點" + +msgid "Remove all" +msgstr "刪除全部" + +msgid "Auto-generate points" +msgstr "自動產生點" + +msgid "Add a brim ear" +msgstr "新增邊緣支撐 (Brim)" + +msgid "Delete a brim ear" +msgstr "刪除邊緣支撐 (Brim)" + +msgid "Adjust head diameter" msgstr "" -msgid "User cancelled." +msgid "Adjust section view" +msgstr "調整截圖視角" + +msgid "" +"Warning: The brim type is not set to \"painted\", the brim ears will not " +"take effect!" +msgstr "警告：邊緣類型未設置「上色」，因此邊緣支撐 (Brim) 不會生效！" + +msgid "Set the brim type of this object to \"painted\"" +msgstr "" + +msgid " invalid brim ears" +msgstr " 無效的邊緣支撐 (Brim)" + +msgid "Brim Ears" +msgstr "邊緣支撐 (Brim)" + +msgid "Please select single object." +msgstr "請選擇一個物件。" + +msgid "Zoom Out" +msgstr "" + +msgid "Zoom In" +msgstr "" + +msgid "Load skipping objects information failed. Please try again." +msgstr "" + +#, c-format, boost-format +msgid "/%d Selected" +msgstr "" + +msgid "Nothing selected" +msgstr "" + +msgid "Over 64 objects in single plate" +msgstr "" + +msgid "The current print job cannot be skipped" +msgstr "" + +msgid "Skipping all objects." +msgstr "" + +msgid "The printing job will be stopped. Continue?" +msgstr "" + +#, c-format, boost-format +msgid "Skipping %d objects." +msgstr "" + +msgid "This action cannot be undone. Continue?" +msgstr "" + +msgid "Skipping objects." +msgstr "" + +msgid "Continue" +msgstr "" + +msgid "Select Filament" +msgstr "" + +msgid "Null Color" +msgstr "" + +msgid "Multiple Color" +msgstr "" + +msgid "Official Filament" +msgstr "" + +msgid "More Colors" msgstr "" #: resources/data/hints.ini: [hint:Precise wall] @@ -15457,6 +19173,8 @@ msgid "" "Did you know that turning on precise wall can improve precision and layer " "consistency?" msgstr "" +"精確牆壁\n" +"您知道啟用精確牆壁可以提高精度和層次一致性嗎？" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" @@ -15465,12 +19183,17 @@ msgid "" "precision and layer consistency if your model doesn't have very steep " "overhangs?" msgstr "" +"三明治模式\n" +"您知道嗎？如果模型中沒有太陡峭的懸空區域，可以使用三明治模式\n" +"（內層-外層-內層）來提升精度並增強層的一致性。" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that Snapmaker Orca supports chamber temperature?" msgstr "" +"機箱溫度\n" +"您知道 Snapmaker Orca 支援機箱內溫度控制嗎？" #: resources/data/hints.ini: [hint:Calibration] msgid "" @@ -15478,24 +19201,33 @@ msgid "" "Did you know that calibrating your printer can do wonders? Check out our " "beloved calibration solution in Snapmaker Orca." msgstr "" +"校正\n" +"您知道校正列印設備可以帶來奇效嗎？快來看看我們在 Snapmaker Orca 中的\n" +"校正解決方案。" #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that Snapmaker Orca supports Auxiliary part cooling fan?" msgstr "" +"輔助風扇\n" +"您知道 Snapmaker Orca 支援輔助零件冷卻風扇嗎？" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that Snapmaker Orca can support Air filtration/Exhaust Fan?" msgstr "" +"空氣過濾/排風扇\n" +"您知道 Snapmaker Orca 支援空氣過濾/排風扇嗎？" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" +"G-code 視窗\n" +"您可以按 C 鍵開啟/關閉 G-code 視窗。" #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -15503,13 +19235,17 @@ msgid "" "You can switch between Prepare and Preview workspaces by " "pressing the Tab key." msgstr "" +"切換工作區\n" +"您可以按 Tab 鍵在 準備 和 預覽 工作區之間切換。" #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Snapmaker Orca offers a wide range of keyboard shortcuts and " -"3D scene operations." +"3D scene operations?" msgstr "" +"如何使用鍵盤快捷鍵\n" +"您知道嗎？ Snapmaker Orca 提供了廣泛的鍵盤快捷鍵和 3D 場景操作。" #: resources/data/hints.ini: [hint:Reverse on odd] msgid "" @@ -15517,6 +19253,8 @@ msgid "" "Did you know that Reverse on odd feature can significantly improve " "the surface quality of your overhangs?" msgstr "" +"奇數反向\n" +"您知道嗎？奇數反向 功能能大幅提升懸空結構的表面品質。" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" @@ -15533,6 +19271,9 @@ msgid "" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing " "problems on the Windows system?" msgstr "" +"修復模型\n" +"您知道嗎？在 Windows 系統上修復損壞的 3D 模型，\n" +"可以有效避免許多切片時的問題。" #: resources/data/hints.ini: [hint:Timelapse] msgid "" @@ -15543,26 +19284,23 @@ msgstr "" "您知道嗎？您可以每次列印時產生一段縮時錄影。" #: resources/data/hints.ini: [hint:Auto-Arrange] -#, fuzzy msgid "" "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" +"Did you know that you can auto-arrange all the objects in your project?" msgstr "" "自動擺放\n" "您知道嗎？您可以自動擺放專案項目中的所有物件。" #: resources/data/hints.ini: [hint:Auto-Orient] -#, fuzzy msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for " -"printing by a simple click?" +"printing with a simple click?" msgstr "" "自動定向\n" -"您知道嗎，您只需單擊滑鼠，即可將物件旋轉到適合的列印方向。" +"您知道嗎？您只需單擊滑鼠，即可將物件旋轉到適合的列印方向。" #: resources/data/hints.ini: [hint:Lay on Face] -#, fuzzy msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces " @@ -15570,19 +19308,18 @@ msgid "" "F key." msgstr "" "指定列印物件底部\n" -"您知道嗎，您可以快速指定模型的底面，使其位於列印板上。選擇 \"選擇底面” 功能或" -"按F鍵。" +"您知道嗎？您可以快速指定模型的底面，使其位於列印板上。\n" +"選擇「選擇底面」或按 F 鍵。" #: resources/data/hints.ini: [hint:Object List] -#, fuzzy msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change " "settings for each object/part?" msgstr "" "物件清單\n" -"您知道物件清單嗎？您可以在其中的查看所有物件/零件，並更改每個物件/零件的設" -"定。" +"您知道嗎？您可以在清單中檢視所有物件/部件，並為每個物件/部件\n" +"調整設定。" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" @@ -15590,6 +19327,8 @@ msgid "" "Did you know that you use the Search tool to quickly find a specific Orca " "Slicer setting?" msgstr "" +"搜尋功能\n" +"您知道嗎？使用「搜尋工具」可以快速定位特定的 Snapmaker Orca 設定。" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -15597,26 +19336,29 @@ msgid "" "Did you know that you can reduce the number of triangles in a mesh using the " "Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" +"簡化模型\n" +"您知道嗎？透過「簡化網格」功能，您可以減少模型中的三角形數量。\n" +"只需右鍵點擊模型，然後選擇「簡化模型」。" #: resources/data/hints.ini: [hint:Slicing Parameter Table] -#, fuzzy msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change " "settings for each object/part?" msgstr "" "參數表格\n" -"您知道嗎？您可以參數表格上的所有物件/零件，並更改每個物件/零件的設定。" +"您知道嗎？您可以看參數表格上的所有物件/零件，並更改每個物件/零\n" +"件的設定。" #: resources/data/hints.ini: [hint:Split to Objects/Parts] -#, fuzzy msgid "" "Split to Objects/Parts\n" "Did you know that you can split a big object into small ones for easy " "colorizing or printing?" msgstr "" "分割成物件/零件\n" -"您知道嗎，您可以把一個大物件分割成多個小物件/零件以便著色或列印。" +"您知道嗎？您可以把一個大物件分割成多個小物件/零件以便著色或\n" +"列印。" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" @@ -15625,9 +19367,11 @@ msgid "" "part modifier? That way you can, for example, create easily resizable holes " "directly in Snapmaker Orca." msgstr "" +"減去零件\n" +"您知道嗎？您可以使用「負零件修飾器」將一個網格從另一個網格中減\n" +"去。這樣，就能直接在 Snapmaker Orca 裡輕鬆建立尺寸可調的孔洞。" #: resources/data/hints.ini: [hint:STEP] -#, fuzzy msgid "" "STEP\n" "Did you know that you can improve your print quality by slicing a STEP file " @@ -15636,8 +19380,9 @@ msgid "" "lower resolution STL. Give it a try!" msgstr "" "STEP檔案\n" -"您知道嗎，通過切片 STEP 檔案而不是 STL 檔案可以提高列印品質。\n" -" Snapmaker Orca 支援切片 STEP 檔案，提供比低解析度 STL 更平滑的結果。試試看！" +"您知道嗎？通過切片 STEP 檔案而不是 STL 檔案可以提高列印品質。\n" +"Snapmaker Orca 支援切片 STEP 檔案，提供比低解析度 STL 更平滑的結果。\n" +"試試看！" #: resources/data/hints.ini: [hint:Z seam location] msgid "" @@ -15647,8 +19392,8 @@ msgid "" "the overall look of your model. Check it out!" msgstr "" "Z接縫位置\n" -"您知道嗎，您可以自訂Z接縫的位置，甚至可以將其繪製在列印上，使其位於不太可見的" -"位置。這樣可以改善模型的整體外觀。試試看！" +"您知道嗎？您可以自訂Z接縫的位置，甚至可以將其繪製在列印上，使\n" +"其位於不太可見的位置。這樣可以改善模型的整體外觀。試試看！" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" @@ -15658,11 +19403,10 @@ msgid "" "printed model by doing some fine-tuning." msgstr "" "流量微調\n" -"你知道嗎，您可以微調流量，以獲得更好看的列印效果。根據線材的不同，可以通過進" -"行一些微調來提高列印模型的整體光潔度。" +"您知道嗎？您可以微調流量，以獲得更好看的列印效果。根據線材的不\n" +"同，可以通過進行一些微調來提高列印模型的整體光潔度。" #: resources/data/hints.ini: [hint:Split your prints into plates] -#, fuzzy msgid "" "Split your prints into plates\n" "Did you know that you can split a model that has a lot of parts into " @@ -15670,8 +19414,8 @@ msgid "" "track of all the parts." msgstr "" "分類列印\n" -"您知道嗎，您可以把一個有很多零件的模型安排到多個獨立的列印板，然後列印出來，" -"這將簡化對所有零件的管理。" +"您知道嗎？您可以把一個有很多零件的模型安排到多個獨立的列印板，\n" +"然後列印出來，這將簡化對所有零件的管理。" #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] @@ -15681,7 +19425,8 @@ msgid "" "Layer Height option? Check it out!" msgstr "" "自適應層高度加速列印\n" -"您知道嗎，您可以使用“自適應層高度”選項可以更快地列印模型。試試看！" +"您知道嗎？您可以使用「自適應層高度」選項可以更快地列印模型。\n" +"試試看！" #: resources/data/hints.ini: [hint:Support painting] msgid "" @@ -15691,8 +19436,8 @@ msgid "" "model that actually need it." msgstr "" "自訂支撐\n" -"您知道嗎，您可以手動繪製增加/隱藏支撐的位置，此功能使僅將支撐材料放置在實際需" -"要的模型截面上變得容易。" +"您知道嗎？您可以手動繪製增加/隱藏支撐的位置，此功能使僅將支撐\n" +"材料放置在實際需要的模型截面上變得容易。" #: resources/data/hints.ini: [hint:Different types of supports] msgid "" @@ -15702,8 +19447,8 @@ msgid "" "print speed. Check them out!" msgstr "" "支撐類型\n" -"您知道嗎，有多種可選的支撐類型，樹狀支撐非常適合人物/動物模型，同時可以節耗材" -"並提高列印速度。試試看！" +"您知道嗎？有多種可選的支撐類型，有機樹狀支撐非常適合人物/動物模型，\n" +"同時可以節線材並提高列印速度。試試看！" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" @@ -15713,47 +19458,45 @@ msgid "" "the best results." msgstr "" "列印絲綢線材\n" -"你知道嗎，絲綢耗材需要特別考慮才能成功列印。為了獲得最佳效果，通常建議使用較" -"高的溫度和較低的速度。" +"您知道嗎？絲綢線材需要特別考慮才能成功列印。為了獲得最佳效果，\n" +"通常建議使用較高的溫度和較低的速度。" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with " +"Did you know that when printed models have a small contact interface with " "the printing surface, it's recommended to use a brim?" msgstr "" -"使用 Brim（裙邊）\n" -"您知道嗎？當模型與熱床表面的接觸面積較小時，建議使用 brim（裙邊）以提高列印成" -"功率。" +"使用 Brim\n" +"您知道嗎？當模型與熱床表面的接觸面積較小時，建議使用 Brim 以提\n" +"高列印成功率。" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] -#, fuzzy msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at " -"one time?" +"once?" msgstr "" "為多個物件設定參數\n" -"您知道嗎，可以同時為所有選取的物件設定切片參數。" +"您知道嗎？您可以同時為所有選取的物件設定切片參數。" #: resources/data/hints.ini: [hint:Stack objects] -#, fuzzy msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" "組合物體\n" -"你知道嗎？你可以把多個物件組合為一個整體。" +"您知道嗎？您可以把多個物件組合為一個整體。" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] -#, fuzzy msgid "" "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into " -"support/objects/infill during filament change?" +"Did you know that you can save wasted filament by flushing it into support/" +"objects/infill during filament change?" msgstr "" "廢料運用到支撐/物件/填充中\n" -"你知道嗎？你可以在換料時將廢料運用到支撐/物件/填充，以節省浪費的線材。" +"您知道嗎？您可以在換料時將廢料運用到支撐/物件/填充，以節省浪費\n" +"的線材。" #: resources/data/hints.ini: [hint:Improve strength] msgid "" @@ -15762,854 +19505,1228 @@ msgid "" "density to improve the strength of the model?" msgstr "" "提高強度\n" -"你知道嗎？你可以使用更多的牆層數和更高的疏散填充密度來提高模型的強度。" +"您知道嗎？您可以使用更多的牆層數和更高的疏散填充密度來提高模型\n" +"強度。" -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] +#: resources/data/hints.ini: [hint:When do you need to print with the printer +#: door opened] +#, fuzzy msgid "" -"When need to print with the printer door opened\n" +"When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of " "extruder/hotend clogging when printing lower temperature filament with a " -"higher enclosure temperature. More info about this in the Wiki." +"higher enclosure temperature? More info about this in the Wiki." msgstr "" +"當列印時需要打開機門時\n" +"您知道嗎？在列印低溫耗材且機箱內溫度較高的情況下，打開列印\n" +"設備機門可以有效降低擠出機或噴嘴堵塞的機率。\n" +"詳情可在Wiki上查看。" #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as " "ABS, appropriately increasing the heatbed temperature can reduce the " -"probability of warping." +"probability of warping?" msgstr "" +"避免翹曲\n" +"您知道嗎？當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度\n" +"可以降低翹曲的機率。" -#, fuzzy -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "列印設備區域網路連接失敗，請重試。" +#~ msgid "Junction Deviation calibration" +#~ msgstr "轉折偏移校正" + +#, c-format, boost-format +#~ msgid "Extruder %d" +#~ msgstr "擠出機 %d" + +#~ msgid "Adaptive layer height" +#~ msgstr "自適應層高" + +#~ msgid "" +#~ "Enabling this option means the height of tree support layer except the " +#~ "first will be automatically calculated." +#~ msgstr "啟用此選項將自動計算（除第一層外）樹狀支撐的層高" + +#~ msgid "AMS not connected" +#~ msgstr "AMS 尚未連接" + +#~ msgid "Ext Spool" +#~ msgstr "外掛線材" + +#~ msgid "Guide" +#~ msgstr "引導" + +#~ msgid "Calibrating AMS..." +#~ msgstr "正在校正 AMS..." + +#~ msgid "A problem occurred during calibration. Click to view the solution." +#~ msgstr "校正過程遇到問題。點擊查看解決方案。" + +#~ msgid "Calibrate again" +#~ msgstr "重新校正" + +#~ msgid "Cancel calibration" +#~ msgstr "取消校正" + +#~ msgid "Feed Filament" +#~ msgstr "進料" + +#~ msgid "An SD card needs to be inserted before printing via LAN." +#~ msgstr "透過區域網路列印之前需要插入 SD 記憶卡。" + +#~ msgid "An SD card needs to be inserted before sending to printer." +#~ msgstr "列印設備要先插入SD卡才能接收傳送。" + +#~ msgid "" +#~ "Note: Only the AMS slots loaded with the same material type can be " +#~ "selected." +#~ msgstr "注意：僅能選擇裝有相同材料類型的 AMS 插槽。" + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled.\n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "如果 AMS 中有兩個相同的線材，則會啟用 AMS 備用線材自動切換功能。\n" +#~ "（目前支援同品牌、同材質、同顏色的線材自動切換）" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS 會在耗材資訊更新後估算 Bambu 耗材的剩餘量，並在列印時自動更新剩餘容" +#~ "量。" #, fuzzy #~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." +#~ "The recommended minimum temperature is less than 190°C or the recommended " +#~ "maximum temperature is greater than 300°C.\n" +#~ msgstr "推薦的最小溫度低於 190 度或推薦的最大溫度高於 300 度。\n" + +#~ msgid "" +#~ "Spiral mode only works when wall loops is 1, support is disabled, top " +#~ "shell layers is 0, sparse infill density is 0 and timelapse type is " +#~ "traditional." #~ msgstr "" -#~ "請從我們的wiki中找到流量動態校準的詳細資訊。\n" -#~ "\n" -#~ "通常情況下，校準是不必要的。當您開始單色/單線材列印，並在列印開始選單中勾" -#~ "選了“流量動態校準”選項時，列印設備將按照舊的方式，在列印前校準絲料；當您開" -#~ "始多色/多線材列印時，列印設備將在每次換絲料時使用預設的補償參數，這在大多" -#~ "數情況下會產生良好的效果。\n" -#~ "\n" -#~ "請注意，有幾種情況會導致校準結果不可靠：使用紋理板進行校準；建模平台黏附效" -#~ "果不好（請清洗建模平台或塗抹膠棒）... 您可以在我們的wiki中找到更多資訊。\n" -#~ "\n" -#~ "在我們的測試中，校準結果有約 10% 的波動，這可能導致每次校準的結果略有不" -#~ "同。我們仍在調查根本原因，並通過新的更新進行改進。" +#~ "花瓶模式必須調整以下設定才能使用：外牆層數為 1、關閉支撐、頂層層數為 0、稀" +#~ "疏填充密度為 0、縮時攝影模式為傳統。" + +#~ msgid "Sweeping XY mech mode" +#~ msgstr "掃描 XY 軸機械模態" + +#~ msgid "Paused due to filament runout" +#~ msgstr "斷料暫停" + +#~ msgid "Heating hotend" +#~ msgstr "加熱熱端" + +#~ msgid "Calibrating extrusion" +#~ msgstr "校正擠出補償" + +#~ msgid "Printing was paused by the user" +#~ msgstr "使用者暫停列印" + +#~ msgid "Pause of front cover falling" +#~ msgstr "工具頭前蓋掉落暫停列印" + +#~ msgid "Calibrating extrusion flow" +#~ msgstr "校正擠出流量" + +#~ msgid "Paused due to nozzle temperature malfunction" +#~ msgstr "暫停：噴嘴溫度異常" + +#~ msgid "Paused due to heat bed temperature malfunction" +#~ msgstr "暫停：熱床溫度異常" + +#~ msgid "Skip step pause" +#~ msgstr "丟步暫停" + +#~ msgid "Motor noise calibration" +#~ msgstr "電機噪音校正" + +#~ msgid "Paused due to AMS lost" +#~ msgstr "由於 AMS 遺失而暫停" + +#~ msgid "Paused due to low speed of the heat break fan" +#~ msgstr "暫停：散熱風扇轉速過低" + +#~ msgid "Paused due to chamber temperature control error" +#~ msgstr "暫停：列印設備內部溫度控制錯誤" + +#~ msgid "Paused by the G-code inserted by user" +#~ msgstr "使用者插入的 G-code 導致暫停" + +#~ msgid "Nozzle filament covered detected pause" +#~ msgstr "檢測到噴嘴被耗材覆蓋，暫停列印" + +#~ msgid "Cutter error pause" +#~ msgstr "刀具錯誤，暫停列印" + +#~ msgid "First layer error pause" +#~ msgstr "第一層錯誤暫停" + +#~ msgid "Nozzle clog pause" +#~ msgstr "噴嘴賭賽暫停" + +#~ msgid "Fatal" +#~ msgstr "致命" + +#~ msgid "Serious" +#~ msgstr "嚴重" + +#~ msgid "Common" +#~ msgstr "普通" + +#~ msgid "" +#~ "The current chamber temperature or the target chamber temperature exceeds " +#~ "45℃. In order to avoid extruder clogging, low temperature filament (PLA/" +#~ "PETG/TPU) is not allowed to be loaded." +#~ msgstr "" +#~ "目前或目標機箱溫度超過 45℃。為避免擠出機堵塞，不允許裝載低溫耗材（PLA/" +#~ "PETG/TPU）。" + +#~ msgid "" +#~ "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In " +#~ "order to avoid extruder clogging, it is not allowed to set the chamber " +#~ "temperature above 45℃." +#~ msgstr "" +#~ "擠出機中已裝載低溫耗材（PLA/PETG/TPU）。為避免擠出機堵塞，機箱溫度不可設定" +#~ "超過 45℃。" + +#~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." +#~ msgstr "AMS 不支援 Bambu PET-CF/PA6-CF。" + +#~ msgid "" +#~ "An object is laid over the plate boundaries or exceeds the height limit.\n" +#~ "Please solve the problem by moving it totally on or off the plate, and " +#~ "confirming that the height is within the build volume." +#~ msgstr "" +#~ "物件被放置在列印板的邊界上或超過高度限制。\n" +#~ "請將其完全移動到列印板內或列印板外，並確認高度在列印空間範圍以內來解決問" +#~ "題。" + +#~ msgid "" +#~ "You can find it in \"Settings > Network > Connection code\"\n" +#~ "on the printer, as shown in the figure:" +#~ msgstr "" +#~ "您可以在列印設備「設置->網路->連接->存取碼」\n" +#~ "查看，如下圖所示：" + +#~ msgid "" +#~ "Browsing file in SD card is not supported in current firmware. Please " +#~ "update the printer firmware." +#~ msgstr "目前韌體不支援瀏覽 SD 卡中的檔案。請更新列印機韌體。" + +#~ msgid "" +#~ "Please check if the SD card is inserted into the printer.\n" +#~ "If it still cannot be read, you can try formatting the SD card." +#~ msgstr "請確認 SD 卡已正確插入印表機。如果仍無法讀取，請嘗試格式化 SD 卡。" + +#~ msgid "Browsing file in SD card is not supported in LAN Only Mode." +#~ msgstr "在僅 LAN 模式下不支援瀏覽 SD 卡中的檔案。" + +#~ msgid "Storage unavailable, insert SD card." +#~ msgstr "無儲存空間，請插入 SD 記憶卡。" + +#~ msgid "Cham" +#~ msgstr "機箱" + +#~ msgid "Still unload" +#~ msgstr "繼續退料" + +#~ msgid "Still load" +#~ msgstr "繼續進料" + +#~ msgid "Can't start this without SD card." +#~ msgstr "沒有 SD 記憶卡無法開始。" + +#~ msgid "Update" +#~ msgstr "韌體更新" + +#~ msgid "Sensitivity of pausing is" +#~ msgstr "暫停的靈敏度為" + +#, c-format, boost-format +#~ msgid "%.1f" +#~ msgstr "%.1f" + +#~ msgid "" +#~ "No AMS filaments. Please select a printer in 'Device' page to load AMS " +#~ "info." +#~ msgstr "沒有發現 AMS 線材。請在「設備」頁面選擇列印設備，載入 AMS 資訊。" + +#~ msgid "" +#~ "Sync filaments with AMS will drop all current selected filament presets " +#~ "and colors. Do you want to continue?" +#~ msgstr "" +#~ "同步 AMS 的線材資訊將會刪除所有目前設定的線材設定與顏色。確定要繼續嗎？" + +#~ msgid "" +#~ "Already did a synchronization, do you want to sync only changes or resync " +#~ "all?" +#~ msgstr "已經同步過，您希望僅同步改變的線材還是重新同步所有線材？" + +#~ msgid "Sync" +#~ msgstr "僅同步改變的" + +#~ msgid "Resync" +#~ msgstr "重新同步所有" + +#~ msgid "" +#~ "There are some unknown filaments mapped to generic preset. Please update " +#~ "Snapmaker Orca or restart Snapmaker Orca to check if there is an update to " +#~ "system presets." +#~ msgstr "" +#~ "有一些未知型號的線材套用於通用預設上。請更新或者重啟 Snapmaker Orca，以檢查系" +#~ "統預設檔有無更新。" + +#~ msgid "" +#~ "Are you sure you want to store original SVGs with their local paths into " +#~ "the 3MF file?\n" +#~ "If you hit 'NO', all SVGs in the project will not be editable any more." +#~ msgstr "" +#~ "您確定要將原始 SVG 檔案及其本地路徑儲存到 3MF 檔案中嗎？\n" +#~ "如果選擇『否』，專案中的所有 SVG 將不再可編輯。" + +#~ msgid "Private protection" +#~ msgstr "私密保護" + +#~ msgid "General Settings" +#~ msgstr "一般設定" + +#~ msgid "Show \"Tip of the day\" notification after start" +#~ msgstr "啟動後顯示「每日小提示」通知" + +#~ msgid "If enabled, useful hints are displayed at startup." +#~ msgstr "如果啟用，將在啟動時顯示有用的提示。" + +#~ msgid "Flushing volumes: Auto-calculate every time the color changed." +#~ msgstr "廢料體積：換色時自動計算。" + +#~ msgid "If enabled, auto-calculate every time the color changed." +#~ msgstr "啟用後，換色時自動計算。" + +#~ msgid "" +#~ "Flushing volumes: Auto-calculate every time when the filament is changed." +#~ msgstr "廢料體積：換料時自動計算。" + +#~ msgid "If enabled, auto-calculate every time when filament is changed" +#~ msgstr "啟用後，換料時自動計算" + +#~ msgid "Auto arrange plate after object cloning" +#~ msgstr "物件複製後自動排列列印板" + +#~ msgid "Network" +#~ msgstr "網路" + +#~ msgid "User Sync" +#~ msgstr "使用者同步" + +#~ msgid "System Sync" +#~ msgstr "系統同步" + +#~ msgid "Associate URLs to Snapmaker Orca" +#~ msgstr "將 URL 關聯到 Snapmaker Orca" + +#~ msgid "every" +#~ msgstr "所有" + +#~ msgid "Downloads" +#~ msgstr "下載" + +#~ msgid "Dark Mode" +#~ msgstr "深色模式" + +#~ msgid "Home page and daily tips" +#~ msgstr "首頁和每日小提示" + +#~ msgid "Show home page on startup" +#~ msgstr "啟動時顯示首頁" + +#~ msgid "Please choose the filament color" +#~ msgstr "請選擇線材顏色" + +#~ msgid "Send print job to" +#~ msgstr "傳送列印作業至" + +#, c-format, boost-format +#~ msgid "" +#~ "Filament %s exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "線材編號 %s 超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" + +#~ msgid "" +#~ "Filament exceeds the number of AMS slots. Please update the printer " +#~ "firmware to support AMS slot assignment." +#~ msgstr "" +#~ "線材編號超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" + +#~ msgid "" +#~ "Filaments to AMS slots mappings have been established. You can click a " +#~ "filament above to change its mapping AMS slot" +#~ msgstr "" +#~ "線材與 AMS 槽位的映射關係已設定完成。您可以點擊上方的線材來更改其對應的 " +#~ "AMS 槽位" + +#~ msgid "" +#~ "Please click each filament above to specify its mapping AMS slot before " +#~ "sending the print job" +#~ msgstr "請在傳送列印前點擊上方各個線材，指定其所對應的 AMS 槽位" + +#~ msgid "" +#~ "The printer firmware only supports sequential mapping of filament => AMS " +#~ "slot." +#~ msgstr "" +#~ "已自動建立「線材清單 => AMS 槽位」的映射關係。 可點擊上方的線材來手動設定" +#~ "其所對應的 AMS 槽位。" + +#~ msgid "An SD card needs to be inserted before printing." +#~ msgstr "請在進行列印前插入 SD 記憶卡。" + +#~ msgid "An SD card needs to be inserted to record timelapse." +#~ msgstr "使用縮時攝影功能需要插入 SD 記憶卡。" + +#, c-format, boost-format +#~ msgid "nozzle memorized: %.1f %s" +#~ msgstr "記錄的噴嘴：%.1f %s" + +#~ msgid "" +#~ "Your nozzle diameter in sliced file is not consistent with memorized " +#~ "nozzle. If you changed your nozzle lately, please go to Device > Printer " +#~ "Parts to change settings." +#~ msgstr "" +#~ "切片檔案中的噴嘴直徑與記憶中的噴嘴不一致。如果您最近更換了噴嘴，請前往「設" +#~ "備 > 列印機部件」更新設定。" + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material (%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "使用 %s 列印高溫材料（%s 材料）可能會導致噴嘴損壞" + +#~ msgid "" +#~ "Connecting to the printer. Unable to cancel during the connection process." +#~ msgstr "正在連接列印設備。連接過程中無法取消。" + +#~ msgid "" +#~ "Caution to use! Flow calibration on Textured PEI Plate may fail due to " +#~ "the scattered surface." +#~ msgstr "小心使用！紋理 PEI 板 上的流量校正可能會因表面光線散射而失敗。" + +#~ msgid "Automatic flow calibration using Micro Lidar" +#~ msgstr "使用 Micro Lidar 進行自動流量校正" + +#~ msgid "Send to Printer SD card" +#~ msgstr "傳送到列印設備的 SD 記憶卡" + +#~ msgid "An SD card needs to be inserted before send to printer SD card." +#~ msgstr "傳送到列印設備需要插入 SD 記憶卡。" + +#~ msgid "The printer does not support sending to printer SD card." +#~ msgstr "該列印設備不支援傳送到 SD 記憶卡。" + +#, c-format, boost-format +#~ msgid "The color count should be in range [%d, %d]." +#~ msgstr "顏色數量應在 [%d, %d] 範圍內。" + +#~ msgid "Current filament colors:" +#~ msgstr "目前線材顏色：" + +#~ msgid "Quick set:" +#~ msgstr "快速設置：" + +#~ msgid "Add consumable extruder after existing extruders." +#~ msgstr "在現有擠出機後新增可用的擠出機。" + +#~ msgid "Cluster colors" +#~ msgstr "色彩分群" + +#~ msgid "Map Filament" +#~ msgstr "映射線材" + +#~ msgid "" +#~ "Note: The color has been selected, you can choose OK \n" +#~ "to continue or manually adjust it." +#~ msgstr "" +#~ "注意：顏色已選擇，您可以點擊確定繼續，\n" +#~ "或者手動進行調整。" + +#~ msgid "" +#~ "Warning: The count of newly added and \n" +#~ "current extruders exceeds 16." +#~ msgstr "警告：新增的擠出機量與目前擠出機總數超過 16。" + +#~ msgid "Auto-Calc" +#~ msgstr "自動計算" + +#~ msgid "" +#~ "Orca would re-calculate your flushing volumes every time the filaments " +#~ "color changed. You could disable the auto-calculate in Snapmaker Orca > " +#~ "Preferences" +#~ msgstr "" +#~ "Orca 會在每次線材顏色變更時重新計算沖洗量。您可以在 Snapmaker Orca 的『偏好設" +#~ "置』中關閉自動計算功能" + +#~ msgid "unloaded" +#~ msgstr "退料" + +#~ msgid "loaded" +#~ msgstr "進料" + +#~ msgid "Filament #" +#~ msgstr "線材#" + +#~ msgid "From" +#~ msgstr "從" + +#~ msgid "To" +#~ msgstr "至" + +#~ msgid "Resume Printing (defects acceptable)" +#~ msgstr "繼續列印 (瑕疵可接受)" + +#~ msgid "Resume Printing (problem solved)" +#~ msgstr "繼續列印 (問題排除了)" + +#~ msgid "" +#~ "Step 1. Please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "步驟 1. 請確保 Snapmaker Orca 與列印設備在同一區域網路（LAN）中。" + +#~ msgid "" +#~ "Step 2. If the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "步驟 2. 若下方的 IP 和訪問代碼與印表機上的實際數值不符，請進行修正。" + +#~ msgid "" +#~ "Step 3. Please obtain the device SN from the printer side; it is usually " +#~ "found in the device information on the printer screen." +#~ msgstr "" +#~ "步驟 3. 請從列印設備上取得設備序號（SN），通常可在列印設備螢幕的設備資訊中" +#~ "查看。" + +#~ msgid "Laser 10 W" +#~ msgstr "10瓦 雷射" + +#~ msgid "Laser 40 W" +#~ msgstr "40瓦 雷射" + +#~ msgid " is too close to others, there may be collisions when printing." +#~ msgstr "離其它物件太近，列印時可能會發生碰撞。" + +#~ msgid "" +#~ "Cannot print multiple filaments which have large difference of " +#~ "temperature together. Otherwise, the extruder and nozzle may be blocked " +#~ "or damaged during printing." +#~ msgstr "" +#~ "無法法同時列印溫度差異較大的多種線材，否則在列印過程中可能會造成擠出機或噴" +#~ "嘴堵塞甚至損壞" + +#~ msgid "Ironing angle" +#~ msgstr "熨燙角度" + +#~ msgid "" +#~ "The angle ironing is done at. A negative number disables this function " +#~ "and uses the default method." +#~ msgstr "設定熨燙操作的角度。若設為負值，將停用此功能並改用預設的熨平方式。" + +#~ msgid "Remove small overhangs" +#~ msgstr "移除小懸空" + +#~ msgid "Remove small overhangs that possibly need no supports." +#~ msgstr "移除可能並不需要支撐的小懸空。" #~ msgid "" #~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" -#~ msgstr "相同名稱的結果只會儲存一個。確定要覆蓋其他結果嗎？" +#~ "you want to overwrite the other results?" +#~ msgstr "同名的結果只能儲存一個，是否要覆蓋其他結果?" + +#~ msgid "External Spool" +#~ msgstr "外部線軸" -#, fuzzy, c-format, boost-format #~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" +#~ "Please input valid values:\n" +#~ "Start temp: <= 350\n" +#~ "End temp: >= 170\n" +#~ "Start temp > End temp + 5" #~ msgstr "" -#~ "已經存在一個具有相同名稱的校準結果：%s。相同名稱的結果只會儲存一個。確定要" -#~ "覆蓋嗎？" +#~ "請輸入有效值：\n" +#~ "起始溫度：<= 350\n" +#~ "終止溫度：>= 170\n" +#~ "開始溫度 > 終止溫度 + 5）" -#, fuzzy -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "請在您的列印板上找到最接近完美的直角" - -#~ msgid "V" -#~ msgstr "版本：" - -#, fuzzy -#~ msgid "" -#~ "Snapmaker Orca is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " -#~ "Ranellucci and the RepRap community" -#~ msgstr "" -#~ "Snapmaker Orca 是基於 Bambulab 的 BambuStudio 開發，而 BambuStudio 源自於 " -#~ "Prusa Research 的 PrusaSlicer。PrusaSlicer 源自於 Alessandro Ranellucci " -#~ "的 Slic3r 和 RepRap 社群" - -#, fuzzy -#~ msgid "Export &Configs" -#~ msgstr "匯出設定檔" - -#~ msgid "Infill direction" -#~ msgstr "填充方向" - -#, fuzzy -#~ msgid "" -#~ "Enable this to get a G-code file which has G2 and G3 moves. And the " -#~ "fitting tolerance is same with resolution" -#~ msgstr "" -#~ "打開這個設定，匯出的 G-code 將包含 G2 G3 指令。圓弧擬合的容許值和精度相" -#~ "同。" - -#~ msgid "" -#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " -#~ "The percentage value is relative to line width of sparse infill" -#~ msgstr "" -#~ "填充區域被輕微擴大，並和外牆產生重疊，進而產生更好的黏接。表示為相對稀疏填" -#~ "充的線寬的百分比。" - -#~ msgid "Unload Filament" -#~ msgstr "退料" - -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "選擇 1 個 AMS 槽位，然後點擊進料/退料按鈕以自動進料/退料。" - -#~ msgid "MainBoard" -#~ msgstr "主板" - -#~ msgid "active" -#~ msgstr "活動的" - -#~ msgid "Jump to layer" -#~ msgstr "轉換到層" - -#~ msgid "Cabin humidity" -#~ msgstr "AMS 內部濕度" - -#, fuzzy -#~ msgid "" -#~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" -#~ msgstr "" -#~ "綠色表示 AMS 濕度正常，橙色表示濕度高，紅色表示濕度過高。（濕度計：越低越" -#~ "好。）" - -#~ msgid "Desiccant status" -#~ msgstr "乾燥劑狀態" - -#, fuzzy -#~ msgid "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" -#~ msgstr "" -#~ "乾燥劑狀態低於兩格表示乾燥劑可能是趨近無效。請更換乾燥劑。（指示格：越高越" -#~ "好）。" - -#~ msgid "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." -#~ msgstr "" -#~ "注意：當 AMS 蓋子打開或更換乾燥劑包裝時，可能需要數小時或一晚才能吸收水" -#~ "分，低溫也會減慢這一過程。在此期間，濕度指示的數值可能並不準確。" - -#~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing is completed." -#~ msgstr "" -#~ "注意：如果是在列印過程中插入新的線材，AMS 會在列印作業結束後自動讀取此線材" -#~ "信息。" - -#, boost-format -#~ msgid "Succeed to export G-code to %1%" -#~ msgstr "成功匯出 G-code 至 %1%" - -#~ msgid "Initialize failed (No Device)!" -#~ msgstr "初始化失敗（沒有列印設備）！" - -#~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "初始化失敗（沒有攝影機）" - -#, fuzzy -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." -#~ msgstr "列印設備正忙於下載，請等待下載完成。" - -#, fuzzy -#~ msgid "Initialize failed (Not supported on the current printer version)!" -#~ msgstr "初始化失敗（目前列印設備的版本不支援）！" - -#~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "初始化失敗（在區域網路模式中不可存取）！" - -#, fuzzy -#~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "初始化失敗（未找到列印設備的區域網路地址）！" +#~ msgid "The custom printer or model is not entered, please enter it." +#~ msgstr "未輸入自訂列印設備或型號，請輸入。" #, c-format, boost-format -#~ msgid "Stopped [%d]!" -#~ msgstr "已停止 [%d]!" - -#, c-format, boost-format -#~ msgid "Load failed [%d]!" -#~ msgstr "載入失敗 [%d]！" - -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "檔案清單為空[%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "載入失敗 [%d]" - -#, fuzzy -#~ msgid "Failed to fetching model infomations from printer." -#~ msgstr "無法從列印設備獲取模型資訊。" - -#~ msgid "Failed to parse model infomations." -#~ msgstr "解析模型資訊失敗。" - -#, boost-format -#~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "您已經更改了預設 \"%1%\"，是否在切換後要保留這些更改的預設參數？" +#~ msgid "nozzle in preset: %s %s" +#~ msgstr "預設中的噴嘴：%s %s" #~ msgid "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "您已經更改了預設參數，是否在切換後要保留這些更改的預設參數？" +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle " +#~ "diameter. Did you change your nozzle lately?" +#~ msgstr "預設的噴嘴直徑與記錄的噴嘴直徑不一致。您最近有更換噴嘴嗎？" -#~ msgid "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)" -#~ msgstr "在斜面表面附近增加實心填充，以保證垂直外殼厚度（頂部+底部實心層）" +#, c-format, boost-format +#~ msgid "*Printing %s material with %s may cause nozzle damage" +#~ msgstr "*使用 %s 材料和 %s 列印可能會導致噴嘴損壞" -#, fuzzy -#~ msgid "Configuration package updated to " -#~ msgstr "設定檔已更新到" - -#, fuzzy #~ msgid "" #~ "Improve shell precision by adjusting outer wall spacing. This also " #~ "improves layer consistency." -#~ msgstr "最佳化外牆路徑以提高外牆精度。這個最佳化同時減少層紋" +#~ msgstr "調整外壁間距以提升外殼精度，同時改善列印層的一致性。" -#~ msgid "" -#~ "The minimum printing speed for the filament when slow down for better " -#~ "layer cooling is enabled, when printing overhangs and when feature speeds " -#~ "are not specified explicitly." -#~ msgstr "" -#~ "線材最小列印速度。當啟用減速以實現更好的層冷卻、列印懸空以及未明確指定特徵" -#~ "速度時" +#~ msgid "Enable filament ramming." +#~ msgstr "啟用線材尖端成型" -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "無稀疏層（实验性功能）" +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + 滑鼠滾輪" -#, fuzzy -#~ msgid "The Config can not be loaded." -#~ msgstr "設定檔無法載入。" +#~ msgid "Ctrl + Mouse wheel" +#~ msgstr "Ctrl + 滑鼠滾輪" -#~ msgid "The 3mf is generated by old Snapmaker Orca, load geometry data only." -#~ msgstr "該 3mf 檔案來自舊版本的 Snapmaker Orca" +#~ msgid "Shift + Left mouse button" +#~ msgstr "Shift + 滑鼠左鍵" -#~ msgid "Movement:" -#~ msgstr "移動：" +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" -#~ msgid "Movement" -#~ msgstr "移動" +#~ msgid "Shift + Mouse move up or down" +#~ msgstr "Shift + 滑鼠上移或下移" -#~ msgid "Auto Segment" -#~ msgstr "自動分割" +#~ msgid "Left mouse button:" +#~ msgstr "滑鼠左鍵：" -#~ msgid "Depth ratio" -#~ msgstr "深度" +#~ msgid "Right mouse button:" +#~ msgstr "滑鼠右鍵：" -#~ msgid "Prizm" -#~ msgstr "稜柱" +#~ msgid "Shift + Left mouse button:" +#~ msgstr "Shift + 滑鼠左鍵：" -#~ msgid "connector is out of cut contour" -#~ msgstr "個連接件超出了切割面範圍" +#~ msgid "Shift + Right mouse button:" +#~ msgstr "Shift + 滑鼠右鍵：" -#~ msgid "connectors are out of cut contour" -#~ msgstr "個連接件超出了切割面範圍" +#~ msgid "Recent projects" +#~ msgstr "最近的專案項目" -#~ msgid "connector is out of object" -#~ msgstr "個連接件穿透了模型" +#~ msgid "Maximum recent projects" +#~ msgstr "最近專案項目的最大數量" -#~ msgid "connectors is out of object" -#~ msgstr "個連接件穿透了模型" +#~ msgid "Maximum count of recent projects" +#~ msgstr "近期專案項目的最大統計" -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "無效狀態。\n" -#~ "切割後沒有選取要保留的部分" +#~ msgid "⌘+Shift+G" +#~ msgstr "⌘+Shift+G" -#~ msgid "Edit Text" -#~ msgstr "編輯文字" +#~ msgid "Ctrl+Shift+G" +#~ msgstr "Ctrl+Shift+G" -#~ msgid "Error! Unable to create thread!" -#~ msgstr "發生錯誤，無法建立執行緒。" +#~ msgid "Shift+A" +#~ msgstr "Shift+A" -#~ msgid "Exception" -#~ msgstr "異常" +#~ msgid "Shift+Q" +#~ msgstr "Shift+Q" -#~ msgid "Choose SLA archive:" -#~ msgstr "選擇 SLA 存檔：" +#~ msgid "Shift+Tab" +#~ msgstr "Shift+Tab" -#~ msgid "Import file" -#~ msgstr "匯入檔案" +#~ msgid "⌘+Any arrow" +#~ msgstr "⌘+方向鍵" -#~ msgid "Import model and profile" -#~ msgstr "匯入模型和設定檔" +#~ msgid "⌥+Left mouse button" +#~ msgstr "⌥+滑鼠左鍵" -#~ msgid "Import profile only" -#~ msgstr "僅匯入設定檔" +#~ msgid "⌘+Left mouse button" +#~ msgstr "⌘+滑鼠左鍵" -#~ msgid "Import model only" -#~ msgstr "僅匯入模型" +#~ msgid "Ctrl+Any arrow" +#~ msgstr "Ctrl+方向鍵" -#~ msgid "Accurate" -#~ msgstr "準確的" +#~ msgid "Alt+Left mouse button" +#~ msgstr "Alt+滑鼠左鍵" -#~ msgid "Balanced" -#~ msgstr "平衡的" +#~ msgid "Ctrl+Left mouse button" +#~ msgstr "Ctrl+滑鼠左鍵" -#~ msgid "Quick" -#~ msgstr "快速的" +#~ msgid "Shift+Left mouse button" +#~ msgstr "Shift+滑鼠左鍵" -#~ msgid "" -#~ "Discribe how long the nozzle will move along the last path when retracting" -#~ msgstr "表示回抽時擦拭的移動距離。" +#~ msgid "Shift+Any arrow" +#~ msgstr "Shift+方向鍵" -#~ msgid "" -#~ "Simplify Model\n" -#~ "Did you know that you can reduce the number of triangles in a mesh using " -#~ "the Simplify mesh feature? Right-click the model and select Simplify " -#~ "model. Read more in the documentation." -#~ msgstr "" -#~ "簡化模型\n" -#~ "您知道嗎，您可以使用“簡化模型”功能減少模型的三角形數。在模型上單擊滑鼠右" -#~ "鍵，然後選擇“簡化模型”。" +#~ msgid "⌘+Mouse wheel" +#~ msgstr "⌘+滑鼠滾輪" -#, fuzzy -#~ msgid "" -#~ "Subtract a Part\n" -#~ "Did you know that you can subtract one mesh from another using the " -#~ "Negative part modifier? That way you can, for example, create easily " -#~ "resizable holes directly in Snapmaker Orca. Read more in the documentation." -#~ msgstr "" -#~ "減去部分幾何體\n" -#~ "您知道嗎，您可以使用負零件從另一個幾何體中減去另一個幾何體。例如，可以直接" -#~ "在 Snapmaker Orca 中建立可輕鬆調整大小的孔。" +#~ msgid "⌥+Mouse wheel" +#~ msgstr "⌥+滑鼠滾輪" -#~ msgid "Filling bed " -#~ msgstr "填充自動朝向" +#~ msgid "Ctrl+Mouse wheel" +#~ msgstr "Ctrl+滑鼠滾輪" + +#~ msgid "Alt+Mouse wheel" +#~ msgstr "Alt+滑鼠滾輪" + +#~ msgid "Shift+Mouse wheel" +#~ msgstr "Shift+滑鼠滾輪" + +#~ msgid "Set Position" +#~ msgstr "設定位置" + +#~ msgid "%" +#~ msgstr "%" #, boost-format -#~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "%1% 填充圖案不支援 100%% 密度。" +#~ msgid "%1%" +#~ msgstr "%1%" -#~ msgid "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - switch to rectilinear pattern automaticlly\n" -#~ "No - reset density to default non 100% value automaticlly" -#~ msgstr "" -#~ "切換到直線圖案？\n" -#~ "是 - 自動切換到直線圖案\n" -#~ "否 - 自動將密度重設為預設的非 100% 值" +#~ msgid "Right click the icon to fix model object" +#~ msgstr "滑鼠右鍵點擊此圖示修復物件模型" -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "請在進料前把噴嘴升溫到 170℃" +#~ msgid "The target object contains only one part and cannot be split." +#~ msgstr "目標物件僅包含一個零件，無法被拆分。" -#, fuzzy -#~ msgid "Show g-code window" -#~ msgstr "顯示 G-code 視窗" +#~ msgid "?" +#~ msgstr "?" -#, fuzzy -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "如果啟用，將顯示 G-Code 視窗。" +#~ msgid "/" +#~ msgstr "/" -#, fuzzy, c-format -#~ msgid "Density of internal sparse infill, 100% means solid throughout" -#~ msgstr "內部稀疏填充密度，100%% 表示整體實心" +#~ msgid "℃" +#~ msgstr "℃" -#~ msgid "Tree support wall loops" -#~ msgstr "樹狀支撐外牆層數" +#~ msgid "mm³" +#~ msgstr "mm³" -#~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "樹狀支撐外牆層數" +#~ msgid "Color Scheme" +#~ msgstr "顏色方案" + +#~ msgid "Percent" +#~ msgstr "百分比" + +#~ msgid "Used filament" +#~ msgstr "使用的線材" + +#~ msgid "720p" +#~ msgstr "720p" + +#~ msgid "1080p" +#~ msgstr "1080p" + +# SoftFever +#~ msgid "More..." +#~ msgstr "更多…" + +#~ msgid "More calibrations" +#~ msgstr "更多校正" + +#~ msgid "0" +#~ msgstr "0" + +#~ msgid "SD Card" +#~ msgstr "SD 記憶卡" + +#~ msgid "100%" +#~ msgstr "100%" + +#~ msgid "No SD Card" +#~ msgstr "無 SD 記憶卡" + +#~ msgid "SD Card Abnormal" +#~ msgstr "SD 記憶卡異常" #, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " 填充圖案不支援 100%% 密度" +#~ msgid "Ejecting of device %s(%s) has failed." +#~ msgstr "退出設備 %s（%s）失敗。" -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" +#~ msgid "mm/s²" +#~ msgstr "mm/s²" -#~ msgid "Tool-Lay on Face" -#~ msgstr "工具-選擇底面" +#~ msgid "mm/s" +#~ msgstr "mm/s" -#~ msgid "Export as STL" -#~ msgstr "匯出為 STL" - -#~ msgid "Check cloud service status" -#~ msgstr "檢查雲端服務狀態" - -#, fuzzy -#~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "請輸入有效的數值（K 值的範圍為 0~0.5）" - -#, fuzzy -#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" -#~ msgstr "請輸入有效的數值（K 值的範圍為 0~0.5, N 值的範圍為 0.6~2.0）" - -#, fuzzy -#~ msgid "Export all objects as STL" -#~ msgstr "匯出所有物件為 STL" - -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "該 3mf 檔案與軟體不相容，將只載入幾何數據。" - -#~ msgid "Incompatible 3mf" -#~ msgstr "不相容的 3mf" - -#, fuzzy -#~ msgid "Add/Remove printers" -#~ msgstr "新增/刪除列印設備" - -#, fuzzy #~ msgid "" -#~ "When print by object, machines with I3 structure will not generate " -#~ "timelapse videos." -#~ msgstr "按物件列印時，龍門結構的設備不會產生縮時攝影影片" +#~ "This option can be changed later in preferences, under 'Load Behaviour'." +#~ msgstr "可以稍後在偏好設定的「載入方式」中變更此選項。" + +#~ msgid "Invalid number" +#~ msgstr "無效數字" #, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "AMS 不支援 %s 。" - -#, fuzzy -#~ msgid "Don't remind me of this version again" -#~ msgstr "不要再提醒我這個版本" - -#~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "錯誤：IP 或訪問碼不正確" +#~ msgid "nozzle memorized: %.2f %s" +#~ msgstr "記憶中的噴嘴：%.2f %s" #~ msgid "" -#~ "Extrude perimeters that have a part over an overhang in the reverse " -#~ "direction on odd layers. This alternating pattern can drastically improve " -#~ "steep overhang." +#~ "Bed temperature when the Cool Plate Supertack is installed. A value of 0 " +#~ "means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "" -#~ "在奇數層上以相反方向列印懸空部位。 這種交替模式的可以大大改善陡峭的懸空列" -#~ "印品質。" +#~ "使用低溫增穩列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於低溫增穩列" +#~ "印板" -#~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "內牆/外牆/填充的順序" +#~ msgid "Ramming settings" +#~ msgstr "尖端成型設定" -#~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "內圈牆/外圈牆/填充的列印順序" +#~ msgid "Profile dependencies" +#~ msgstr "設定檔相依項目" -#~ msgid "inner/outer/infill" -#~ msgstr "內牆/外牆/填充" +#~ msgid "the Configuration package is incompatible with the current APP." +#~ msgstr "設定檔與目前(手機應用程式)?不相容。" -#~ msgid "outer/inner/infill" -#~ msgstr "外牆/內牆/填充" +#~ msgid "Total ramming time" +#~ msgstr "尖端成型總時間" -#~ msgid "infill/inner/outer" -#~ msgstr "填充/內牆/外牆" +#~ msgid "s" +#~ msgstr "秒" -#~ msgid "infill/outer/inner" -#~ msgstr "填充/外牆/內牆" +#~ msgid "Total rammed volume" +#~ msgstr "尖端成型總體積" -#~ msgid "inner-outer-inner/infill" -#~ msgstr "內牆/外牆/內牆/填充" +#~ msgid "Ramming line width" +#~ msgstr "尖端成型線寬" -#, fuzzy -#~ msgid "Export 3MF" -#~ msgstr "匯出 3MF" +#~ msgid "Ramming line spacing" +#~ msgstr "尖端成型線間距" -#, fuzzy -#~ msgid "Export project as 3MF." -#~ msgstr "匯出項目為 3MF。" +#~ msgid "Shift+R" +#~ msgstr "Shift+R" -#, fuzzy -#~ msgid "Export slicing data" -#~ msgstr "匯出切片資料" +#~ msgid "resume" +#~ msgstr "繼續" -#, fuzzy -#~ msgid "Export slicing data to a folder." -#~ msgstr "匯出切片資料到資料夾" +#~ msgid "°C" +#~ msgstr "°C" -#, fuzzy -#~ msgid "Load slicing data" -#~ msgstr "匯入切片資料" +#~ msgid "Classic mode" +#~ msgstr "經典模式" -#, fuzzy -#~ msgid "Load cached slicing data from directory" -#~ msgstr "從目錄匯入快取的切片資料" +#~ msgid "Enable this option to use classic mode." +#~ msgstr "開啟此選項以使用經典模式" -#, fuzzy -#~ msgid "Export STL" -#~ msgstr "匯出 STL 檔案" +#~ msgid "Compatible machine" +#~ msgstr "相容的設備" -#, fuzzy -#~ msgid "Export the objects as multiple STL." -#~ msgstr "將物件匯出為多個 STL 檔案" +#~ msgid "Compatible machine condition" +#~ msgstr "相容的設備條件" -#~ msgid "Slice" -#~ msgstr "切片" +#~ msgid "Compatible process profiles condition" +#~ msgstr "相容的切片設定條件" -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "切片平台：0-所有平台，i-第i個平台，其他-無效" +#~ msgid "Default filament color" +#~ msgstr "預設線材顏色" -#~ msgid "Show command help." -#~ msgstr "顯示命令行幫助。" +#~ msgid "Rotate solid infill direction" +#~ msgstr "旋轉實心填充方向" -#, fuzzy -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "將 3mf 的設定值更新為最新值。" +#~ msgid "Rotate the solid infill direction by 90° for each layer." +#~ msgstr "每層實心填充的列印方向旋轉 90°。" -#, fuzzy -#~ msgid "Load default filaments" -#~ msgstr "載入預設列印線材" - -#, fuzzy -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "載入第一個列印線材為預設線材" - -#, fuzzy -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "切片時每個列印板的最大三角形數。" - -#, fuzzy -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "每個列印板的最大切片時間（秒）。" - -#~ msgid "Normative check" -#~ msgstr "規範性檢查" - -#~ msgid "Check the normative items." -#~ msgstr "檢查規範性項目。" - -#~ msgid "Output Model Info" -#~ msgstr "輸出模型資訊" - -#~ msgid "Output the model's information." -#~ msgstr "輸出模型的資訊。" - -#, fuzzy -#~ msgid "Export Settings" -#~ msgstr "匯出設定" - -#, fuzzy -#~ msgid "Export settings to a file." -#~ msgstr "匯出設定檔到檔案。" - -#~ msgid "Send progress to pipe" -#~ msgstr "將進度傳送到管道" - -#~ msgid "Send progress to pipe." -#~ msgstr "將進度傳送到管道。" - -#~ msgid "Arrange Options" -#~ msgstr "擺放選項" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "擺放選項：0-關閉，1-開啟，其他-自動" - -#~ msgid "Repetions count" -#~ msgstr "重複次數" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "整個模型的重複次數" - -#~ msgid "Convert Unit" -#~ msgstr "轉換單位" - -#~ msgid "Convert the units of model" -#~ msgstr "轉換模型的單位" - -#~ msgid "Rotate around X" -#~ msgstr "繞 X 旋轉" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "繞 X 軸的旋轉角度（以度為單位）。" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "根據因子縮放模型" - -#, fuzzy -#~ msgid "Load General Settings" -#~ msgstr "載入一般設定" - -#, fuzzy -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "從指定檔案載入列印參數/設備設定" - -#, fuzzy -#~ msgid "Load Filament Settings" -#~ msgstr "載入線材設定" - -#, fuzzy -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "從指定檔案清單載入線材設定" - -#~ msgid "Skip Objects" -#~ msgstr "零件跳過" - -#~ msgid "Skip some objects in this print" -#~ msgstr "列印過程中跳過一些零件" - -#, fuzzy -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "使用最新設定時載入最新的列印參數/設備設定" - -#, fuzzy #~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "使用最新設定時，從指定的檔案清單中載入最新的列印參數/設備設定。" - -#~ msgid "Output directory" -#~ msgstr "輸出路徑" - -#~ msgid "Output directory for the exported files." -#~ msgstr "匯出檔案的輸出路徑。" - -#~ msgid "Debug level" -#~ msgstr "除錯等級" - -#, fuzzy -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Flow Compensation Model, used to adjust the flow for small infill areas. " +#~ "The model is expressed as a comma separated pair of values for extrusion " +#~ "length and flow correction factors, one per line, in the following " +#~ "format: \"1.234,5.678\"" #~ msgstr "" -#~ "設定除錯日誌等級。0：fatal， 1：error， 2：warning， 3：info， 4：debug， " -#~ "5：trace\n" +#~ "流量補償模型，用於在小面積填充區域中調整擠出流量。模型格式為以逗號分隔的擠" +#~ "出長度和流量補償係數，每行輸入一組，格式示例如下：1.234,5.678。\n" +#~ "譯者補充：此參數允許根據不同的擠出長度動態調整流量補償，以提升小區域列印的" +#~ "精確度和品質。" -#, fuzzy, boost-format -#~ msgid "The selected preset: %1% is not found." -#~ msgstr "未找到選定的預設值：%1%。" +#~ msgid "" +#~ "The highest printable layer height for the extruder. Used to limit the " +#~ "maximum layer height when adaptive layer height is enabled." +#~ msgstr "擠出頭最大可列印的層高。用於限制開啟自適應層高時的最大層高" + +#~ msgid "mm³/s²" +#~ msgstr "mm³/s²" + +#~ msgid "" +#~ "The lowest printable layer height for the extruder. Used to limit the " +#~ "minimum layer height when adaptive layer height is enabled." +#~ msgstr "擠出頭最小可列印的層高。用於限制開啟自適應層高時的最小層高" + +#~ msgid "mm²" +#~ msgstr "mm²" + +#~ msgid "Retract on top layer" +#~ msgstr "頂層回抽" + +#~ msgid "" +#~ "Force a retraction on top layer. Disabling could prevent clog on very " +#~ "slow patterns with small movements, like Hilbert curve." +#~ msgstr "" +#~ "在頂層強制執行回抽操作。停用此功能可能有助於避免在非常緩慢且移動距離較小的" +#~ "模式（例如希爾伯特曲線）中出現堵塞" + +#~ msgid "" +#~ "Some amount of material in extruder is pulled back to avoid ooze during " +#~ "long travel. Set zero to disable retraction" +#~ msgstr "" +#~ "擠出機將材料拉回指定長度，避免空駛較長時軟化的線材滲出。設定為 0 表示關閉" +#~ "回抽" + +#~ msgid "Speed of retractions." +#~ msgstr "回抽速度" + +#~ msgid "" +#~ "Speed for reloading filament into extruder. Zero means same speed of " +#~ "retraction." +#~ msgstr "線材裝填的速度，0 表示和回抽速度一致" + +#~ msgid "Single loop draft shield" +#~ msgstr "單圈防風罩" + +#~ msgid "" +#~ "Limits the draft shield loops to one wall after the first layer. This is " +#~ "useful, on occasion, to conserve filament but may cause the draft shield " +#~ "to warp / crack." +#~ msgstr "" +#~ "將防風罩的迴圈數限制為第一層後只有一層壁。這樣做有時能節省耗材，但可能會導" +#~ "致防風罩變形或裂開。" + +#~ msgid "Spacing of interface lines. Zero means solid interface." +#~ msgstr "接觸面的線距。0 代表實心接觸面" #, fuzzy #~ msgid "" -#~ "3D Scene Operations\n" -#~ "Did you know how to control view and object/part selection with mouse and " -#~ "touchpanel in the 3D scene?" +#~ "Minimum thickness of thin features. Model features that are thinner than " +#~ "this value will not be printed, while features thicker than this value " +#~ "will be widened to the minimum wall width. It's expressed as a percentage " +#~ "over nozzle diameter." #~ msgstr "" -#~ "3D 場景操作\n" -#~ "如何在 3D 場景中使用滑鼠和觸碰面板進行視角控制和物件/零件選擇" +#~ "薄壁特徵的最小厚度。比這個數值還薄的特徵將不被列印，而比最小特徵厚度還厚的" +#~ "特征將被加寬到牆最小寬度。參數值表示為相對噴嘴直徑的百分比" -#, fuzzy -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "修復模型\n" -#~ "您知道嗎？您可以修復一個損壞的 3D 模型以避免諸多切片問題。" +#~ msgid "Load uptodate process/machine settings when using uptodate." +#~ msgstr "使用最新版本時，載入最新的參數與機器設定" -#, fuzzy -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "當需要打開印表機門進行列印時\n" -#~ "當列印較低溫度的耗材時，打開印表機門可以減少擠出機或熱端堵塞的可能性。 有" -#~ "關此內容的更多信息，請參見 Wiki。" +#~ msgid "Load uptodate filament settings when using uptodate." +#~ msgstr "使用最新版本時，載入最新的列印耗材設定" -#~ msgid "Embeded" -#~ msgstr "嵌入的" +#~ msgid "Downward machines settings" +#~ msgstr "相容機器設定" + +#~ msgid "Load filament IDs for each object" +#~ msgstr "載入每個物件的耗材識別碼" #~ msgid "" -#~ "Snapmaker Orca configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." +#~ "We now have added the auto-calibration for different filaments, which is " +#~ "fully automated and the result will be saved into the printer for future " +#~ "use. You only need to do the calibration in the following limited cases:\n" +#~ "1. If you introduce a new filament of different brands/models or the " +#~ "filament is damp\n" +#~ "2. If the nozzle is worn out or replaced with a new one\n" +#~ "3. If the max volumetric speed or print temperature is changed in the " +#~ "filament setting" #~ msgstr "" -#~ "Snapmaker Orca 設定檔可能已損壞而無法解析。請刪除此檔案並重新啟動 Orca " -#~ "Slicer。" +#~ "我們現在已經為不同的列印線材新增了自動校正功能，該功能是完全自動化的，並且" +#~ "結果將儲存在列印設備中以供將來使用。您只需要在以下有限情況下進行校正：\n" +#~ "1. 如果您引入了不同品牌/型號的新列印線材，或者列印線材受潮；\n" +#~ "2. 如果噴嘴磨損或更換了新的噴嘴；\n" +#~ "3. 如果您在列印線材設定中更改了最大體積速度或列印溫度。" -#~ msgid "Online Models" -#~ msgstr "線上模型" +#~ msgid "step: " +#~ msgstr "步距：" -#, fuzzy -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "在首頁上顯示工作人員推薦的線上模型" +#~ msgid "mm/mm" +#~ msgstr "mm/mm" + +#~ msgid "Load STL" +#~ msgstr "載入 STL" + +#~ msgid "Load svg" +#~ msgstr "載入 SVG" + +#~ msgid "Back Page 1" +#~ msgstr "返回第一頁" + +#~ msgid "Delete Filament" +#~ msgstr "刪除線材" + +#~ msgid "Refresh Printers" +#~ msgstr "重新整理列印設備" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in almost invisible layer lines and higher " +#~ "print quality but shorter print time." +#~ msgstr "" +#~ "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎不可見的層線" +#~ "並提高列印品質，但列印時間較短。" + +#~ msgid "" +#~ "Compared with the default profile of a 0.2 mm nozzle, it has a smaller " +#~ "layer height. This results in minimal layer lines and higher print " +#~ "quality, but shorter print time." +#~ msgstr "" +#~ "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生最小的層線並提高" +#~ "列印品質，但列印時間較短。" + +#~ msgid "" +#~ "It has a very big layer height. This results in very apparent layer " +#~ "lines, low print quality and general print time." +#~ msgstr "" +#~ "與0.8mm噴嘴的預設配置相比，該配置具有較大的層高，產生非常明顯的層線並顯著" +#~ "降低列印品質，但在某些情況下會縮短列印時間。" + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a bigger " +#~ "layer height. This results in very apparent layer lines and much lower " +#~ "print quality but shorter print time in some cases." +#~ msgstr "" +#~ "與0.8mm噴嘴的預設配置相比，該配置具有更大的層高，產生極為明顯的層線並顯著" +#~ "降低列印品質，但在某些情況下會大幅縮短列印時間。" + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a much " +#~ "bigger layer height. This results in extremely apparent layer lines and " +#~ "much lower print quality but much shorter print time in some cases." +#~ msgstr "" +#~ "與0.8mm噴嘴的預設配置相比，該配置具有略小的層高，產生略少但仍明顯的層線，" +#~ "並略微提高列印品質，但在某些情況下會延長列印時間。" + +#~ msgid "" +#~ "Compared with the default profile of a 0.8 mm nozzle, it has a smaller " +#~ "layer height. This results in less but still apparent layer lines and " +#~ "slightly higher print quality, but longer print time in some cases." +#~ msgstr "" +#~ "與0.8mm噴嘴的預設配置相比，該配置具有較少的層高，產生較少但仍明顯的層線，" +#~ "並略微提高列印品質，但在某些情況下會延長列印時間。" + +#~ msgid "Connection to Flashforge is working correctly." +#~ msgstr "成功連接到 Flashforge。" + +#~ msgid "Could not connect to Flashforge" +#~ msgstr "無法連接到 Flashforge" + +#~ msgid "Set the brim type to \"painted\"" +#~ msgstr "將邊緣類型設置為「上色」。" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "我們新增了一種實驗性支撐樣式『苗條樹』，具有更小的支撐體積但強度較低。\n" +#~ "建議使用以下設置：0 個介面層、0 頂部距離、2 層牆。" + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "對於「強壯樹」和「混合樹」的支撐樣式，我們推薦以下設定：至少 2 層界面層，" +#~ "至少 0.1 毫米的頂部z距離或使用專用的支撐線材。" + +#~ msgid "Branch Diameter with double walls" +#~ msgstr "分支雙層牆直徑" + +#~ msgid "" +#~ "Branches with area larger than the area of a circle of this diameter will " +#~ "be printed with double walls for stability. Set this value to zero for no " +#~ "double walls." +#~ msgstr "" +#~ "當分支的面積大於設定直徑圓形的面積時，將以雙層牆結構列印以增強穩定性。若設" +#~ "為 0，則不啟用雙層牆結構。" + +#~ msgid "This setting specify the count of walls around support" +#~ msgstr "此設定指定支援結構的牆壁數量" + +#, c-format, boost-format +#~ msgid "Support: generate toolpath at layer %d" +#~ msgstr "支撐：正在產生 %d 層的路徑" + +#~ msgid "Support: detect overhangs" +#~ msgstr "支撐：正在偵測懸空面" + +#~ msgid "Support: propagate branches" +#~ msgstr "支撐：正在生長樹枝" + +#~ msgid "Support: draw polygons" +#~ msgstr "支撐：正在產生多邊形" + +#~ msgid "Support: generate toolpath" +#~ msgstr "支撐：正在產生走線路徑" + +#, c-format, boost-format +#~ msgid "Support: generate polygons at layer %d" +#~ msgstr "支撐：正在產生 %d 層的多邊形" + +#, c-format, boost-format +#~ msgid "Support: fix holes at layer %d" +#~ msgstr "支撐：正在修補 %d 層的空洞" + +#, c-format, boost-format +#~ msgid "Support: propagate branches at layer %d" +#~ msgstr "支撐：正在生長 %d 層的樹枝" + +#, c-format, boost-format +#~ msgid "" +#~ "When the overhang exceeds this specified threshold, force the cooling fan " +#~ "to run at the 'Overhang Fan Speed' set below. This threshold is expressed " +#~ "as a percentage, indicating the portion of each line's width that is " +#~ "unsupported by the layer beneath it. Setting this value to 0%% forces the " +#~ "cooling fan to run for all outer walls, regardless of the overhang degree." +#~ msgstr "" +#~ "當懸垂超過此設定的閾值時，冷卻風扇將強制以「懸垂風扇轉速」運行。該閾值以百" +#~ "分比表示，代表每條列印線寬中未受下層支撐的比例。若將此值設為 0%%，則冷卻風" +#~ "扇將對所有外牆啟動，不論懸垂角度大小。" + +#~ msgid "Snapmaker Orca" +#~ msgstr "Snapmaker Orca" + +#~ msgid "Current Cabin humidity" +#~ msgstr "濕度" + +#~ msgid "Stopped." +#~ msgstr "已經停止。" + +#, c-format, boost-format +#~ msgid "Connect failed [%d]!" +#~ msgstr "連接失敗 [%d]！" + +#~ msgid "Initialize failed (Device connection not ready)!" +#~ msgstr "初始化失敗（未連接列印設備）" + +#~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" +#~ msgstr "初始化失敗（存儲不可用，請插入 SD 卡）！" + +#, c-format, boost-format +#~ msgid "Initialize failed (%s)!" +#~ msgstr "初始化失敗（%s）!" + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "區域網路連接失敗（傳送列印檔案）" + +#~ msgid "" +#~ "Step 1, please confirm Snapmaker Orca and your printer are in the same LAN." +#~ msgstr "第1步，請確認 Snapmaker Orca 和您的列印設備在同一個區域網路上。" + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "步驟2, 如果下面的 IP 和訪問代碼與列印設備上的實際值不同，請輸入正確的數" +#~ "值。" + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "步驟 3：Ping 該 IP 地址以檢查封包遺失和延遲。" + +#~ msgid "Force cooling for overhang and bridge" +#~ msgstr "懸空/橋接強制冷卻" + +#~ msgid "" +#~ "Enable this option to optimize part cooling fan speed for overhang and " +#~ "bridge to get better cooling" +#~ msgstr "勾選這個選項將自動最佳化橋接和懸空的風扇轉速以獲得更好的冷卻" + +#~ msgid "Fan speed for overhang" +#~ msgstr "懸空風扇速度" + +#~ msgid "" +#~ "Force part cooling fan to be this speed when printing bridge or overhang " +#~ "wall which has large overhang degree. Forcing cooling for overhang and " +#~ "bridge can get better quality for these part" +#~ msgstr "" +#~ "當列印橋接和超過臨界值設定的懸空時，強制物件冷卻風扇為設定的速度數值。強制" +#~ "冷卻能夠使懸空和橋接獲得更好的列印品質" + +#~ msgid "Cooling overhang threshold" +#~ msgstr "冷卻懸空臨界值" #, c-format #~ msgid "" #~ "Force cooling fan to be specific speed when overhang degree of printed " -#~ "part exceeds this value. Expressed as percentage which indicides how much " -#~ "width of the line without support from lower layer. 0%% means forcing " +#~ "part exceeds this value. Expressed as percentage which indicates how much " +#~ "width of the line without support from lower layer. 0% means forcing " #~ "cooling for all outer wall no matter how much overhang degree" #~ msgstr "" -#~ "當列印物件的懸空程度超過此值時，強制冷卻風扇達到特定速度。\n" -#~ "用百分比表示，表明沒有下層支撐的線的寬度是多少。0%% 意味著無論懸空程度如" -#~ "何，都要對所有外壁強制冷卻。" +#~ "當列印部件的懸空角度超過此值時，強制冷卻風扇以特定速度運行。此值以百分比表" +#~ "示，指的是無下層支撐的線寬比例。設為 0%% 時，表示無論懸垂角度如何，冷卻風" +#~ "扇都會對所有外牆啟用強制冷卻" -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "自動冷卻降速的最小列印速度" +#~ msgid "Bridge infill direction" +#~ msgstr "橋接填充角度" + +#~ msgid "Bridge density" +#~ msgstr "橋接密度" #~ msgid "" -#~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" -#~ "(Currently supporting automatic supply of consumables with the same " -#~ "brand, material type, and color)" +#~ "Density of external bridges. 100% means solid bridge. Default is 100%." +#~ msgstr "外部橋接的密度。 100% 意味著堅固的橋樑。 預設值為 100%。" + +#~ msgid "" +#~ "Improve shell precision by adjusting outer wall spacing. This also " +#~ "improves layer consistency.\n" +#~ "Note: This setting will only take effect if the wall sequence is " +#~ "configured to Inner-Outer" #~ msgstr "" -#~ "目前無相同的備用線材，暫時無法自動補充線材。\n" -#~ "（目前支援品牌、線材種類、顏色相同的線材的自動補給）" +#~ "調整外牆間距以提升外殼精度，並改善層的一致性。\n" +#~ "注意：此設定僅在牆體順序設置為由內向外時有效" -#~ msgid "Invalid nozzle diameter" -#~ msgstr "無效的噴嘴口徑" +#~ msgid "Thick bridges" +#~ msgstr "厚橋" + +#~ msgid "Filter out small internal bridges (beta)" +#~ msgstr "篩選掉短的內部橋接（Beta）" #~ msgid "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clog." +#~ "This option can help reducing pillowing on top surfaces in heavily " +#~ "slanted or curved models.\n" +#~ "\n" +#~ "By default, small internal bridges are filtered out and the internal " +#~ "solid infill is printed directly over the sparse infill. This works well " +#~ "in most cases, speeding up printing without too much compromise on top " +#~ "surface quality.\n" +#~ "\n" +#~ "However, in heavily slanted or curved models especially where too low " +#~ "sparse infill density is used, this may result in curling of the " +#~ "unsupported solid infill, causing pillowing.\n" +#~ "\n" +#~ "Disabling this option will print internal bridge layer over slightly " +#~ "unsupported internal solid infill. The options below control the amount " +#~ "of filtering, i.e. the amount of internal bridges created.\n" +#~ "\n" +#~ "Filter - enable this option. This is the default behavior and works well " +#~ "in most cases.\n" +#~ "\n" +#~ "Limited filtering - creates internal bridges on heavily slanted surfaces, " +#~ "while avoiding creating unnecessary internal bridges. This works well for " +#~ "most difficult models.\n" +#~ "\n" +#~ "No filtering - creates internal bridges on every potential internal " +#~ "overhang. This option is useful for heavily slanted top surface models. " +#~ "However, in most cases it creates too many unnecessary bridges." #~ msgstr "" -#~ "熱床溫度超過了線材的軟化溫度。請在列印前打開３Ｄ列印機前門以防堵頭。" - -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "軟化溫度" +#~ "此選項有助於減少在大幅傾斜或曲面的模型上頂部表面瑕疵。\n" +#~ "\n" +#~ "預設情況下，小型內部橋接會被篩選掉，內部實心填充會直接印刷在稀疏填充上。這" +#~ "在大多數情況下運作良好，能加速列印並且不會過度影響頂部表面品質。\n" +#~ "\n" +#~ "在大幅傾斜或曲面的模型中，特別是當使用過低的稀疏填充密度時，這可能會導致支" +#~ "撐不夠的實心填充翹曲，進而造成瑕疵。\n" +#~ "\n" +#~ "停用此選項將在稍微未支撐的內部實心填充區列印內部橋接層。以下選項控制篩選的" +#~ "程度(建立內部橋接的數量)。\n" +#~ "\n" +#~ "篩選 - 啟用此選項。這是預設行為，並且在大多數情況下運作良好。\n" +#~ "\n" +#~ "有限篩選 - 僅在大幅傾斜的表面上建立內部橋接。這對大多數困難模型來說效果良" +#~ "好。\n" +#~ "\n" +#~ "不篩選 - 在每個可能的內部懸空處建立內部橋接。這個選項對於大幅傾斜的頂部表" +#~ "面模型很有用。然而，在大多數情況下，它會建立過多不必要的橋接。" #~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" -#~ msgstr "材料在這個溫度開始變軟。因此熱床溫度不能超過這個溫度。" - -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "如果機器有輔助部件冷卻風扇，勾選該選項" - -#~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" +#~ "This fan speed is enforced during all support interfaces, to be able to " +#~ "weaken their bonding with a high fan speed.\n" +#~ "Set to -1 to disable this override.\n" +#~ "Can only be overridden by disable_fan_first_layers." #~ msgstr "" -#~ "輔助部件冷卻風扇的轉速。輔助部件冷卻風扇將一直運行在該速度，除了設置的無需" -#~ "冷卻的前若干層" +#~ "所有支撐界面列印期間強制風扇速度，高速可以減少支撐與物件的融合。\n" +#~ "設定為 -1 以停用。" -#~ msgid "" -#~ "Filter out gaps smaller than the threshold specified. This setting won't " -#~ "affect top/bottom layers" -#~ msgstr "小於指定臨界值的微小間隙不填充。本設置不會對頂/底層起作用" - -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "底部出現空層，已被最近的正常層替換。" - -#~ msgid "The model has too many empty layers." -#~ msgstr "模型有太多空層。" - -#~ msgid "Cali" -#~ msgstr "校準" - -#~ msgid "Calibration of extrusion" -#~ msgstr "擠出校準" - -#~ msgid "Push new filament into the extruder" -#~ msgstr "將新的線材推入擠出機" - -#, c-format, boost-format -#~ msgid "" -#~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" -#~ msgstr "" -#~ "其它層的熱床溫度比首層熱床溫度低太多，超過了攝氏 %d 度。\n" -#~ "這可能導致列印中模型從熱床脫落" - -#~ msgid "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blocked and printing failure\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed" -#~ msgstr "" -#~ "熱床溫度超過了線材的軟化溫度，線材軟化可能造成噴頭堵塞。\n" -#~ "請保持３Ｄ列印機在列印過程中敞開，保證空氣流通或降低熱床溫度" - -#~ msgid "Total Time Estimation" -#~ msgstr "總時間預估" - -#~ msgid "Resonance frequency identification" -#~ msgstr "共振頻率辨識" - -#~ msgid "Immediately score" -#~ msgstr "立即打分" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "請為您喜歡的 Bambu 商城模型打分。" - -#~ msgid "Score" -#~ msgstr "打分" - -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "高溫列印熱床" - -#~ msgid "Can't connect to the printer" -#~ msgstr "無法連接３Ｄ列印機" - -#~ msgid "Recommended temperature range" -#~ msgstr "建議溫度範圍" - -#~ msgid "High Temp Plate" -#~ msgstr "高溫列印熱床" - -#~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" -#~ msgstr "安裝高溫列印熱床時的熱床溫度。0值表示這個線材不支援高溫列印熱床" - -#~ msgid "Internal bridge support thickness" -#~ msgstr "內部橋接支撐厚度" - -#~ msgid "" -#~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " -#~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" -#~ msgstr "" -#~ "如果開啟， Snapmaker Orca 切片會沿著內部橋接的邊沿在其下方產生支撐輪廓。這些" -#~ "支撐輪廓可以防止懸空地列印內部橋接並提高頂面質量，特別是在填充密度較低的情" -#~ "況下。這個設置用於調整支撐輪廓的厚度，0表示關閉此特性。" - -#~ msgid "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." -#~ msgstr "" -#~ "支撐物的樣式和形狀。對於普通支撐，將支撐投射到一個規則的網格中，將創建更穩" -#~ "定的支撐（默認），而緊貼的支撐塔將節省材料並減少物體的瑕疵。\n" -#~ "對於樹形支撐，苗條板的風格將更積極地合併樹枝，並節省大量的材料（默認），而" -#~ "混合風格將在大的平面懸垂下創建與正常支撐類似的結構。" - -#~ msgid "Target chamber temperature" -#~ msgstr "目標腔體溫度" - -#~ msgid "Bed temperature difference" -#~ msgstr "熱床溫差" - -#~ msgid "" -#~ "Do not recommend bed temperature of other layer to be lower than initial " -#~ "layer for more than this threshold. Too low bed temperature of other " -#~ "layer may cause the model broken free from build plate" -#~ msgstr "" -#~ "不建議其它層熱床溫度比首層的熱床溫度低於這個值。太低的其它層熱床溫度可能導" -#~ "致列印過程中模型從列印板脫落。" - -#~ msgid "Orient the model" -#~ msgstr "旋轉模型" +#~ msgid ", ver: " +#~ msgstr "，版本" \ No newline at end of file